add support for kernel 2.6.29 (rc3) by a patch based on the Openmoko patchset (git...
authormirko <mirko@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 10 May 2009 23:21:54 +0000 (23:21 +0000)
committermirko <mirko@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 10 May 2009 23:21:54 +0000 (23:21 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15764 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/s3c24xx/Makefile
target/linux/s3c24xx/config-2.6.29 [new file with mode: 0644]
target/linux/s3c24xx/patches-2.6.29/000-downgrade-to-rc3.patch [new file with mode: 0644]
target/linux/s3c24xx/patches-2.6.29/001-merge-openmoko.patch [new file with mode: 0644]
target/linux/s3c24xx/patches-2.6.29/002-call-preinit-instead-of-init.patch [new file with mode: 0644]

index c5a4a94..33050cb 100644 (file)
@@ -12,7 +12,7 @@ BOARDNAME:=Samsung S3C24xx
 FEATURES:=jffs2
 CFLAGS:=-O2 -pipe -march=armv4t -mtune=arm920t -funit-at-a-time
 
-LINUX_VERSION:=2.6.28.10
+LINUX_VERSION:=2.6.29
 
 DEVICE_TYPE=phone
 
diff --git a/target/linux/s3c24xx/config-2.6.29 b/target/linux/s3c24xx/config-2.6.29
new file mode 100644 (file)
index 0000000..c4dddb3
--- /dev/null
@@ -0,0 +1,587 @@
+# CONFIG_AEABI is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_APM_EMULATION=y
+CONFIG_APM_POWER=y
+CONFIG_AR6000_WLAN=y
+# CONFIG_AR6000_WLAN_DEBUG is not set
+# CONFIG_AR6000_WLAN_RESET is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C2440=y
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARM=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARPD is not set
+CONFIG_ASHMEM=y
+CONFIG_ATAGS_PROC=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_GTA01=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PWM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BATTERY_BQ27000_HDQ=y
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_GTA01=y
+CONFIG_BITREVERSE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_CHARGER_PCF50606=y
+CONFIG_CHARGER_PCF50633=y
+CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
+CONFIG_COMPAT_BRK=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_32=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_CPU_S3C2440=y
+CONFIG_CPU_S3C2442=y
+CONFIG_CPU_S3C244X=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CRC16=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRYPTO_AEAD is not set
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_DCB is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_S3C_UART=2
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_DISPLAY_JBT6K74=y
+# CONFIG_DISPLAY_L1K002 is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_DMADEVICES=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_ELF_CORE=y
+# CONFIG_EMBEDDED is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FB=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FIND_IRQ_BLOCKERS is not set
+CONFIG_FIQ=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FREEZER=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVICE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PWM=y
+# CONFIG_HDQ_GPIO_BITBANG is not set
+CONFIG_HID=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_COMPAT=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PID=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_HZ=200
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_S3C2410=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_GPIO_BUTTONS is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_LIS302DL=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+CONFIG_INPUT_PCF50606_PMU=y
+CONFIG_INPUT_PCF50633_PMU=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_ISDN is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_NEO1973=y
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP5521 is not set
+CONFIG_LEDS_NEO1973_GTA02=y
+CONFIG_LEDS_NEO1973_VIBRATOR=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LOCK_KERNEL=y
+# CONFIG_LOGO is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_AT2440EVB is not set
+# CONFIG_MACH_JIVE is not set
+# CONFIG_MACH_N30 is not set
+CONFIG_MACH_NEO1973=y
+CONFIG_MACH_NEO1973_GTA01=y
+CONFIG_MACH_NEO1973_GTA02=y
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_QT2410 is not set
+# CONFIG_MACH_RX3715 is not set
+CONFIG_MACH_SMDK=y
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2443 is not set
+# CONFIG_MACH_TCT_HAMMER is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_VSTMS is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MFD_GLAMO=y
+CONFIG_MFD_GLAMO_FB=y
+# CONFIG_MFD_GLAMO_FB_XGLAMO_WORKAROUND is not set
+CONFIG_MFD_GLAMO_MCI=y
+CONFIG_MFD_GLAMO_SPI_FB=y
+CONFIG_MFD_GLAMO_SPI_GPIO=y
+CONFIG_MFD_PCF50606=y
+CONFIG_MFD_PCF50633=y
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_S3C=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MMC_SPI is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MTD_ABSENT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_S3C2410=y
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+CONFIG_MTD_NAND_S3C2410_HWECC=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+CONFIG_MTD_ROM=y
+CONFIG_NAMESPACES=y
+CONFIG_NEO1973_GTA02_2440=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NET_NS is not set
+# CONFIG_NET_SCH_DRR is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_IPV4=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NO_IOPORT=y
+CONFIG_NR_TTY_DEVICES=6
+# CONFIG_NVRAM is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCA9632=y
+CONFIG_PCF50606_ADC=y
+CONFIG_PCF50606_GPO=y
+CONFIG_PCF50606_WATCHDOG=y
+CONFIG_PCF50633_ADC=y
+CONFIG_PCF50633_GPIO=y
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PDA_POWER=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_PLAT_S3C=y
+CONFIG_PLAT_S3C24XX=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PREEMPT=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_PCF50606=y
+CONFIG_REGULATOR_PCF50633=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_PCF50606=y
+CONFIG_RTC_DRV_PCF50633=y
+CONFIG_RTC_DRV_S3C=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_PM=y
+# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_S3C2440_DMA=y
+# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_GPIO_EXTRA=0
+CONFIG_S3C24XX_PWM=y
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+# CONFIG_S3C_BOOT_WATCHDOG is not set
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DMA=y
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=2
+CONFIG_S3C_PWM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SENSORS_PCF50606 is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2440=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIO=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SMDK2440_CPU2440=y
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_SND=m
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCM=m
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_S3C24XX_SOC_I2S=m
+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m
+# CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753 is not set
+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
+# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8731 is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_TIMER=m
+# CONFIG_SND_USB is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_GPIO_OLD is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_S3C24XX=y
+CONFIG_SPI_S3C24XX_GPIO=y
+# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_SQUASHFS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_MD5SIG=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+CONFIG_TOUCHSCREEN_FILTER=y
+CONFIG_TOUCHSCREEN_FILTER_GROUP=y
+CONFIG_TOUCHSCREEN_FILTER_LINEAR=y
+CONFIG_TOUCHSCREEN_FILTER_MEAN=y
+CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PCAP7200 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_UID16=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_SMX is not set
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_USB=y
+CONFIG_USB_ACM=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+CONFIG_USB_GADGET_S3C2410=y
+# CONFIG_USB_GADGET_S3C_OTGD_HS is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_HID=y
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_OPTICON is not set
+CONFIG_USB_SERIAL_OPTION=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USER_NS is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WLAN_80211 is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/s3c24xx/patches-2.6.29/000-downgrade-to-rc3.patch b/target/linux/s3c24xx/patches-2.6.29/000-downgrade-to-rc3.patch
new file mode 100644 (file)
index 0000000..c9c8453
--- /dev/null
@@ -0,0 +1,170300 @@
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/include/asm/bug.h linux-2.6.29-rc3.owrt/arch/alpha/include/asm/bug.h
+--- linux-2.6.29.owrt/arch/alpha/include/asm/bug.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/include/asm/bug.h 2009-05-10 23:48:27.000000000 +0200
+@@ -8,12 +8,17 @@
+ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the
+    function loaded the GP, so this could fail in modules.  */
+-#define BUG() do {                                                    \
+-      __asm__ __volatile__(                                           \
+-              "call_pal %0  # bugchk\n\t"                             \
+-              ".long %1\n\t.8byte %2"                                 \
+-              : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));     \
+-      for ( ; ; ); } while (0)
++static inline void ATTRIB_NORET __BUG(const char *file, int line)
++{
++      __asm__ __volatile__(
++              "call_pal %0  # bugchk\n\t"
++              ".long %1\n\t.8byte %2"
++                     : : "i" (PAL_bugchk), "i"(line), "i"(file));
++      for ( ; ; )
++              ;
++}
++
++#define BUG() __BUG(__FILE__, __LINE__)
+ #define HAVE_ARCH_BUG
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/include/asm/dma-mapping.h linux-2.6.29-rc3.owrt/arch/alpha/include/asm/dma-mapping.h
+--- linux-2.6.29.owrt/arch/alpha/include/asm/dma-mapping.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/include/asm/dma-mapping.h 2009-05-10 23:48:27.000000000 +0200
+@@ -29,8 +29,6 @@
+ #else /* no PCI - no IOMMU. */
+-#include <asm/io.h>   /* for virt_to_phys() */
+-
+ struct scatterlist;
+ void *dma_alloc_coherent(struct device *dev, size_t size,
+                        dma_addr_t *dma_handle, gfp_t gfp);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/Kconfig linux-2.6.29-rc3.owrt/arch/alpha/Kconfig
+--- linux-2.6.29.owrt/arch/alpha/Kconfig       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/Kconfig   2009-05-10 23:48:27.000000000 +0200
+@@ -8,7 +8,6 @@
+       select HAVE_AOUT
+       select HAVE_IDE
+       select HAVE_OPROFILE
+-      select HAVE_SYSCALL_WRAPPERS
+       help
+         The Alpha is a 64-bit general-purpose processor designed and
+         marketed by the Digital Equipment Corporation of blessed memory,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/entry.S linux-2.6.29-rc3.owrt/arch/alpha/kernel/entry.S
+--- linux-2.6.29.owrt/arch/alpha/kernel/entry.S        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/entry.S    2009-05-10 23:48:27.000000000 +0200
+@@ -933,7 +933,7 @@
+ osf_sigprocmask:
+       .prologue 0
+       mov     $sp, $18
+-      jmp     $31, sys_osf_sigprocmask
++      jmp     $31, do_osf_sigprocmask
+ .end osf_sigprocmask
+       .align  4
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/osf_sys.c linux-2.6.29-rc3.owrt/arch/alpha/kernel/osf_sys.c
+--- linux-2.6.29.owrt/arch/alpha/kernel/osf_sys.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/osf_sys.c  2009-05-10 23:48:27.000000000 +0200
+@@ -54,7 +54,8 @@
+  * identical to OSF as we don't return 0 on success, but doing otherwise
+  * would require changes to libc.  Hopefully this is good enough.
+  */
+-SYSCALL_DEFINE1(osf_brk, unsigned long, brk)
++asmlinkage unsigned long
++osf_brk(unsigned long brk)
+ {
+       unsigned long retval = sys_brk(brk);
+       if (brk && brk != retval)
+@@ -65,9 +66,9 @@
+ /*
+  * This is pure guess-work..
+  */
+-SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
+-              unsigned long, text_len, unsigned long, bss_start,
+-              unsigned long, bss_len)
++asmlinkage int
++osf_set_program_attributes(unsigned long text_start, unsigned long text_len,
++                         unsigned long bss_start, unsigned long bss_len)
+ {
+       struct mm_struct *mm;
+@@ -145,9 +146,9 @@
+       return -EFAULT;
+ }
+-SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
+-              struct osf_dirent __user *, dirent, unsigned int, count,
+-              long __user *, basep)
++asmlinkage int
++osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent,
++                unsigned int count, long __user *basep)
+ {
+       int error;
+       struct file *file;
+@@ -176,9 +177,9 @@
+ #undef NAME_OFFSET
+-SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len,
+-              unsigned long, prot, unsigned long, flags, unsigned long, fd,
+-              unsigned long, off)
++asmlinkage unsigned long
++osf_mmap(unsigned long addr, unsigned long len, unsigned long prot,
++       unsigned long flags, unsigned long fd, unsigned long off)
+ {
+       struct file *file = NULL;
+       unsigned long ret = -EBADF;
+@@ -253,8 +254,8 @@
+       return error;   
+ }
+-SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
+-              struct osf_statfs __user *, buffer, unsigned long, bufsiz)
++asmlinkage int
++osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
+ {
+       struct path path;
+       int retval;
+@@ -267,8 +268,8 @@
+       return retval;
+ }
+-SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
+-              struct osf_statfs __user *, buffer, unsigned long, bufsiz)
++asmlinkage int
++osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz)
+ {
+       struct file *file;
+       int retval;
+@@ -367,8 +368,8 @@
+       return do_mount("", dirname, "proc", flags, NULL);
+ }
+-SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
+-              int, flag, void __user *, data)
++asmlinkage int
++osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data)
+ {
+       int retval = -EINVAL;
+       char *name;
+@@ -398,7 +399,8 @@
+       return retval;
+ }
+-SYSCALL_DEFINE1(osf_utsname, char __user *, name)
++asmlinkage int
++osf_utsname(char __user *name)
+ {
+       int error;
+@@ -421,12 +423,14 @@
+       return error;
+ }
+-SYSCALL_DEFINE0(getpagesize)
++asmlinkage unsigned long
++sys_getpagesize(void)
+ {
+       return PAGE_SIZE;
+ }
+-SYSCALL_DEFINE0(getdtablesize)
++asmlinkage unsigned long
++sys_getdtablesize(void)
+ {
+       return sysctl_nr_open;
+ }
+@@ -434,7 +438,8 @@
+ /*
+  * For compatibility with OSF/1 only.  Use utsname(2) instead.
+  */
+-SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
++asmlinkage int
++osf_getdomainname(char __user *name, int namelen)
+ {
+       unsigned len;
+       int i;
+@@ -522,8 +527,8 @@
+       PL_DEL = 5, PL_FDEL = 6
+ };
+-SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
+-              union pl_args __user *, args)
++asmlinkage long
++osf_proplist_syscall(enum pl_code code, union pl_args __user *args)
+ {
+       long error;
+       int __user *min_buf_size_ptr;
+@@ -562,8 +567,8 @@
+       return error;
+ }
+-SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
+-              struct sigstack __user *, uoss)
++asmlinkage int
++osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss)
+ {
+       unsigned long usp = rdusp();
+       unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size;
+@@ -603,7 +608,8 @@
+       return error;
+ }
+-SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
++asmlinkage long
++osf_sysinfo(int command, char __user *buf, long count)
+ {
+       char *sysinfo_table[] = {
+               utsname()->sysname,
+@@ -641,8 +647,9 @@
+       return err;
+ }
+-SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
+-              unsigned long, nbytes, int __user *, start, void __user *, arg)
++asmlinkage unsigned long
++osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
++             int __user *start, void __user *arg)
+ {
+       unsigned long w;
+       struct percpu_struct *cpu;
+@@ -698,8 +705,9 @@
+       return -EOPNOTSUPP;
+ }
+-SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
+-              unsigned long, nbytes, int __user *, start, void __user *, arg)
++asmlinkage unsigned long
++osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
++             int __user *start, void __user *arg)
+ {
+       switch (op) {
+       case SSI_IEEE_FP_CONTROL: {
+@@ -872,8 +880,8 @@
+       value->tv_sec = jiffies / HZ;
+ }
+-SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv,
+-              struct timezone __user *, tz)
++asmlinkage int
++osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
+ {
+       if (tv) {
+               struct timeval ktv;
+@@ -888,8 +896,8 @@
+       return 0;
+ }
+-SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
+-              struct timezone __user *, tz)
++asmlinkage int
++osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
+ {
+       struct timespec kts;
+       struct timezone ktz;
+@@ -908,7 +916,8 @@
+       return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
+ }
+-SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it)
++asmlinkage int
++osf_getitimer(int which, struct itimerval32 __user *it)
+ {
+       struct itimerval kit;
+       int error;
+@@ -920,8 +929,8 @@
+       return error;
+ }
+-SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in,
+-              struct itimerval32 __user *, out)
++asmlinkage int
++osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out)
+ {
+       struct itimerval kin, kout;
+       int error;
+@@ -943,8 +952,8 @@
+ }
+-SYSCALL_DEFINE2(osf_utimes, char __user *, filename,
+-              struct timeval32 __user *, tvs)
++asmlinkage int
++osf_utimes(char __user *filename, struct timeval32 __user *tvs)
+ {
+       struct timespec tv[2];
+@@ -970,8 +979,9 @@
+ #define MAX_SELECT_SECONDS \
+       ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
+-SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+-              fd_set __user *, exp, struct timeval32 __user *, tvp)
++asmlinkage int
++osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
++         struct timeval32 __user *tvp)
+ {
+       struct timespec end_time, *to = NULL;
+       if (tvp) {
+@@ -1016,7 +1026,8 @@
+       long    ru_nivcsw;              /* involuntary " */
+ };
+-SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
++asmlinkage int
++osf_getrusage(int who, struct rusage32 __user *ru)
+ {
+       struct rusage32 r;
+@@ -1042,8 +1053,9 @@
+       return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
+ }
+-SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
+-              struct rusage32 __user *, ur)
++asmlinkage long
++osf_wait4(pid_t pid, int __user *ustatus, int options,
++        struct rusage32 __user *ur)
+ {
+       struct rusage r;
+       long ret, err;
+@@ -1089,8 +1101,8 @@
+  * seems to be a timeval pointer, and I suspect the second
+  * one is the time remaining.. Ho humm.. No documentation.
+  */
+-SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep,
+-              struct timeval32 __user *, remain)
++asmlinkage int
++osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain)
+ {
+       struct timeval tmp;
+       unsigned long ticks;
+@@ -1143,7 +1155,8 @@
+       int  :32; int  :32; int  :32; int  :32;
+ };
+-SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
++asmlinkage int
++sys_old_adjtimex(struct timex32 __user *txc_p)
+ {
+         struct timex txc;
+       int ret;
+@@ -1254,8 +1267,8 @@
+       return 0;
+ }
+-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
+-              const struct iovec __user *, vector, unsigned long, count)
++asmlinkage ssize_t
++osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count)
+ {
+       if (unlikely(personality(current->personality) == PER_OSF4))
+               if (osf_fix_iov_len(vector, count))
+@@ -1263,8 +1276,8 @@
+       return sys_readv(fd, vector, count);
+ }
+-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
+-              const struct iovec __user *, vector, unsigned long, count)
++asmlinkage ssize_t
++osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count)
+ {
+       if (unlikely(personality(current->personality) == PER_OSF4))
+               if (osf_fix_iov_len(vector, count))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/pci-noop.c linux-2.6.29-rc3.owrt/arch/alpha/kernel/pci-noop.c
+--- linux-2.6.29.owrt/arch/alpha/kernel/pci-noop.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/pci-noop.c 2009-05-10 23:48:27.000000000 +0200
+@@ -109,8 +109,7 @@
+ /* Stubs for the routines in pci_iommu.c: */
+ void *
+-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+-                     dma_addr_t *dma_addrp, gfp_t gfp)
++pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+ {
+       return NULL;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/process.c linux-2.6.29-rc3.owrt/arch/alpha/kernel/process.c
+--- linux-2.6.29.owrt/arch/alpha/kernel/process.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/process.c  2009-05-10 23:48:27.000000000 +0200
+@@ -93,8 +93,8 @@
+       if (cpuid != boot_cpuid) {
+               flags |= 0x00040000UL; /* "remain halted" */
+               *pflags = flags;
+-              set_cpu_present(cpuid, false);
+-              set_cpu_possible(cpuid, false);
++              cpu_clear(cpuid, cpu_present_map);
++              cpu_clear(cpuid, cpu_possible_map);
+               halt();
+       }
+ #endif
+@@ -120,8 +120,8 @@
+ #ifdef CONFIG_SMP
+       /* Wait for the secondaries to halt. */
+-      set_cpu_present(boot_cpuid, false);
+-      set_cpu_possible(boot_cpuid, false);
++      cpu_clear(boot_cpuid, cpu_present_map);
++      cpu_clear(boot_cpuid, cpu_possible_map);
+       while (cpus_weight(cpu_present_map))
+               barrier();
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/signal.c linux-2.6.29-rc3.owrt/arch/alpha/kernel/signal.c
+--- linux-2.6.29.owrt/arch/alpha/kernel/signal.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/signal.c   2009-05-10 23:48:27.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/tty.h>
+ #include <linux/binfmts.h>
+ #include <linux/bitops.h>
+-#include <linux/syscalls.h>
+ #include <asm/uaccess.h>
+ #include <asm/sigcontext.h>
+@@ -52,8 +51,8 @@
+  * Note that we don't need to acquire the kernel lock for SMP
+  * operation, as all of this is local to this thread.
+  */
+-SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
+-              struct pt_regs *, regs)
++asmlinkage unsigned long
++do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs)
+ {
+       unsigned long oldmask = -EINVAL;
+@@ -82,9 +81,9 @@
+       return oldmask;
+ }
+-SYSCALL_DEFINE3(osf_sigaction, int, sig,
+-              const struct osf_sigaction __user *, act,
+-              struct osf_sigaction __user *, oact)
++asmlinkage int 
++osf_sigaction(int sig, const struct osf_sigaction __user *act,
++            struct osf_sigaction __user *oact)
+ {
+       struct k_sigaction new_ka, old_ka;
+       int ret;
+@@ -113,9 +112,10 @@
+       return ret;
+ }
+-SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+-              struct sigaction __user *, oact,
+-              size_t, sigsetsize, void __user *, restorer)
++asmlinkage long
++sys_rt_sigaction(int sig, const struct sigaction __user *act,
++               struct sigaction __user *oact,
++               size_t sigsetsize, void __user *restorer)
+ {
+       struct k_sigaction new_ka, old_ka;
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/smp.c linux-2.6.29-rc3.owrt/arch/alpha/kernel/smp.c
+--- linux-2.6.29.owrt/arch/alpha/kernel/smp.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/smp.c      2009-05-10 23:48:27.000000000 +0200
+@@ -121,11 +121,10 @@
+ {
+       int cpuid = hard_smp_processor_id();
+-      if (cpu_online(cpuid)) {
++      if (cpu_test_and_set(cpuid, cpu_online_map)) {
+               printk("??, cpu 0x%x already present??\n", cpuid);
+               BUG();
+       }
+-      set_cpu_online(cpuid, true);
+       /* Turn on machine checks.  */
+       wrmces(7);
+@@ -436,8 +435,8 @@
+                               ((char *)cpubase + i*hwrpb->processor_size);
+                       if ((cpu->flags & 0x1cc) == 0x1cc) {
+                               smp_num_probed++;
+-                              set_cpu_possible(i, true);
+-                              set_cpu_present(i, true);
++                              cpu_set(i, cpu_possible_map);
++                              cpu_set(i, cpu_present_map);
+                               cpu->pal_revision = boot_cpu_palrev;
+                       }
+@@ -470,8 +469,8 @@
+       /* Nothing to do on a UP box, or when told not to.  */
+       if (smp_num_probed == 1 || max_cpus == 0) {
+-              init_cpu_possible(cpumask_of(boot_cpuid));
+-              init_cpu_present(cpumask_of(boot_cpuid));
++              cpu_possible_map = cpumask_of_cpu(boot_cpuid);
++              cpu_present_map = cpumask_of_cpu(boot_cpuid);
+               printk(KERN_INFO "SMP mode deactivated.\n");
+               return;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/alpha/kernel/systbls.S linux-2.6.29-rc3.owrt/arch/alpha/kernel/systbls.S
+--- linux-2.6.29.owrt/arch/alpha/kernel/systbls.S      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/alpha/kernel/systbls.S  2009-05-10 23:48:27.000000000 +0200
+@@ -17,7 +17,7 @@
+       .quad sys_write
+       .quad alpha_ni_syscall                  /* 5 */
+       .quad sys_close
+-      .quad sys_osf_wait4
++      .quad osf_wait4
+       .quad alpha_ni_syscall
+       .quad sys_link
+       .quad sys_unlink                        /* 10 */
+@@ -27,11 +27,11 @@
+       .quad sys_mknod
+       .quad sys_chmod                         /* 15 */
+       .quad sys_chown
+-      .quad sys_osf_brk
++      .quad osf_brk
+       .quad alpha_ni_syscall
+       .quad sys_lseek
+       .quad sys_getxpid                       /* 20 */
+-      .quad sys_osf_mount
++      .quad osf_mount
+       .quad sys_umount
+       .quad sys_setuid
+       .quad sys_getxuid
+@@ -53,7 +53,7 @@
+       .quad alpha_ni_syscall                  /* 40 */
+       .quad sys_dup
+       .quad sys_alpha_pipe
+-      .quad sys_osf_set_program_attributes
++      .quad osf_set_program_attributes
+       .quad alpha_ni_syscall
+       .quad sys_open                          /* 45 */
+       .quad alpha_ni_syscall
+@@ -81,7 +81,7 @@
+       .quad sys_newlstat
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 70 */
+-      .quad sys_osf_mmap
++      .quad osf_mmap
+       .quad alpha_ni_syscall
+       .quad sys_munmap
+       .quad sys_mprotect
+@@ -94,17 +94,17 @@
+       .quad sys_setgroups                     /* 80 */
+       .quad alpha_ni_syscall
+       .quad sys_setpgid
+-      .quad sys_osf_setitimer
++      .quad osf_setitimer
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 85 */
+-      .quad sys_osf_getitimer
++      .quad osf_getitimer
+       .quad sys_gethostname
+       .quad sys_sethostname
+       .quad sys_getdtablesize
+       .quad sys_dup2                          /* 90 */
+       .quad sys_newfstat
+       .quad sys_fcntl
+-      .quad sys_osf_select
++      .quad osf_select
+       .quad sys_poll
+       .quad sys_fsync                         /* 95 */
+       .quad sys_setpriority
+@@ -123,22 +123,22 @@
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 110 */
+       .quad sys_sigsuspend
+-      .quad sys_osf_sigstack
++      .quad osf_sigstack
+       .quad sys_recvmsg
+       .quad sys_sendmsg
+       .quad alpha_ni_syscall                  /* 115 */
+-      .quad sys_osf_gettimeofday
+-      .quad sys_osf_getrusage
++      .quad osf_gettimeofday
++      .quad osf_getrusage
+       .quad sys_getsockopt
+       .quad alpha_ni_syscall
+ #ifdef CONFIG_OSF4_COMPAT
+-      .quad sys_osf_readv                     /* 120 */
+-      .quad sys_osf_writev
++      .quad osf_readv                         /* 120 */
++      .quad osf_writev
+ #else
+       .quad sys_readv                         /* 120 */
+       .quad sys_writev
+ #endif
+-      .quad sys_osf_settimeofday
++      .quad osf_settimeofday
+       .quad sys_fchown
+       .quad sys_fchmod
+       .quad sys_recvfrom                      /* 125 */
+@@ -154,7 +154,7 @@
+       .quad sys_socketpair                    /* 135 */
+       .quad sys_mkdir
+       .quad sys_rmdir
+-      .quad sys_osf_utimes
++      .quad osf_utimes
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 140 */
+       .quad sys_getpeername
+@@ -172,16 +172,16 @@
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 155 */
+-      .quad sys_osf_sigaction
++      .quad osf_sigaction
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+-      .quad sys_osf_getdirentries
+-      .quad sys_osf_statfs                    /* 160 */
+-      .quad sys_osf_fstatfs
++      .quad osf_getdirentries
++      .quad osf_statfs                        /* 160 */
++      .quad osf_fstatfs
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+-      .quad sys_osf_getdomainname             /* 165 */
++      .quad osf_getdomainname                 /* 165 */
+       .quad sys_setdomainname
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+@@ -224,7 +224,7 @@
+       .quad sys_semctl
+       .quad sys_semget                        /* 205 */
+       .quad sys_semop
+-      .quad sys_osf_utsname
++      .quad osf_utsname
+       .quad sys_lchown
+       .quad sys_shmat
+       .quad sys_shmctl                        /* 210 */
+@@ -258,23 +258,23 @@
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 240 */
+-      .quad sys_osf_sysinfo
++      .quad osf_sysinfo
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+-      .quad sys_osf_proplist_syscall
++      .quad osf_proplist_syscall
+       .quad alpha_ni_syscall                  /* 245 */
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 250 */
+-      .quad sys_osf_usleep_thread
++      .quad osf_usleep_thread
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad sys_sysfs
+       .quad alpha_ni_syscall                  /* 255 */
+-      .quad sys_osf_getsysinfo
+-      .quad sys_osf_setsysinfo
++      .quad osf_getsysinfo
++      .quad osf_setsysinfo
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall
+       .quad alpha_ni_syscall                  /* 260 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9260ek_defconfig
+--- linux-2.6.29.owrt/arch/arm/configs/at91sam9260ek_defconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9260ek_defconfig     2009-05-10 23:48:27.000000000 +0200
+@@ -608,7 +608,7 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT91SAM9X_WATCHDOG=y
++CONFIG_AT91SAM9_WATCHDOG=y
+ #
+ # USB-based Watchdog Cards
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9261ek_defconfig
+--- linux-2.6.29.owrt/arch/arm/configs/at91sam9261ek_defconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9261ek_defconfig     2009-05-10 23:48:27.000000000 +0200
+@@ -700,7 +700,7 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT91SAM9X_WATCHDOG=y
++CONFIG_AT91SAM9_WATCHDOG=y
+ #
+ # USB-based Watchdog Cards
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9263ek_defconfig
+--- linux-2.6.29.owrt/arch/arm/configs/at91sam9263ek_defconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9263ek_defconfig     2009-05-10 23:48:27.000000000 +0200
+@@ -710,7 +710,7 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT91SAM9X_WATCHDOG=y
++CONFIG_AT91SAM9_WATCHDOG=y
+ #
+ # USB-based Watchdog Cards
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/configs/at91sam9rlek_defconfig linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9rlek_defconfig
+--- linux-2.6.29.owrt/arch/arm/configs/at91sam9rlek_defconfig  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/configs/at91sam9rlek_defconfig      2009-05-10 23:48:27.000000000 +0200
+@@ -606,7 +606,7 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT91SAM9X_WATCHDOG=y
++CONFIG_AT91SAM9_WATCHDOG=y
+ #
+ # Sonics Silicon Backplane
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/configs/qil-a9260_defconfig linux-2.6.29-rc3.owrt/arch/arm/configs/qil-a9260_defconfig
+--- linux-2.6.29.owrt/arch/arm/configs/qil-a9260_defconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/configs/qil-a9260_defconfig 2009-05-10 23:48:27.000000000 +0200
+@@ -727,7 +727,7 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-# CONFIG_AT91SAM9X_WATCHDOG is not set
++# CONFIG_AT91SAM9_WATCHDOG is not set
+ #
+ # USB-based Watchdog Cards
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/elf.c linux-2.6.29-rc3.owrt/arch/arm/kernel/elf.c
+--- linux-2.6.29.owrt/arch/arm/kernel/elf.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/elf.c        2009-05-10 23:48:27.000000000 +0200
+@@ -74,9 +74,9 @@
+  */
+ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
+ {
+-      if (executable_stack != EXSTACK_DISABLE_X)
++      if (executable_stack != EXSTACK_ENABLE_X)
+               return 1;
+-      if (cpu_architecture() < CPU_ARCH_ARMv6)
++      if (cpu_architecture() <= CPU_ARCH_ARMv6)
+               return 1;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/entry-armv.S linux-2.6.29-rc3.owrt/arch/arm/kernel/entry-armv.S
+--- linux-2.6.29.owrt/arch/arm/kernel/entry-armv.S     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/entry-armv.S 2009-05-10 23:48:27.000000000 +0200
+@@ -650,7 +650,6 @@
+ no_fp:        mov     pc, lr
+ __und_usr_unknown:
+-      enable_irq
+       mov     r0, sp
+       adr     lr, ret_from_exception
+       b       do_undefinstr
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/entry-common.S linux-2.6.29-rc3.owrt/arch/arm/kernel/entry-common.S
+--- linux-2.6.29.owrt/arch/arm/kernel/entry-common.S   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/entry-common.S       2009-05-10 23:48:27.000000000 +0200
+@@ -111,7 +111,6 @@
+       .globl mcount_call
+ mcount_call:
+       bl ftrace_stub
+-      ldr lr, [fp, #-4]                       @ restore lr
+       ldmia sp!, {r0-r3, pc}
+ ENTRY(ftrace_caller)
+@@ -123,7 +122,6 @@
+       .globl ftrace_call
+ ftrace_call:
+       bl ftrace_stub
+-      ldr lr, [fp, #-4]                       @ restore lr
+       ldmia sp!, {r0-r3, pc}
+ #else
+@@ -135,16 +133,14 @@
+       adr r0, ftrace_stub
+       cmp r0, r2
+       bne trace
+-      ldr lr, [fp, #-4]                       @ restore lr
+       ldmia sp!, {r0-r3, pc}
+ trace:
+-      ldr r1, [fp, #-4]                       @ lr of instrumented routine
++      ldr r1, [fp, #-4]
+       mov r0, lr
+       sub r0, r0, #MCOUNT_INSN_SIZE
+       mov lr, pc
+       mov pc, r2
+-      mov lr, r1                              @ restore lr
+       ldmia sp!, {r0-r3, pc}
+ #endif /* CONFIG_DYNAMIC_FTRACE */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/fiq.c linux-2.6.29-rc3.owrt/arch/arm/kernel/fiq.c
+--- linux-2.6.29.owrt/arch/arm/kernel/fiq.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/fiq.c        2009-05-10 23:48:27.000000000 +0200
+@@ -88,7 +88,7 @@
+  * disable irqs for the duration.  Note - these functions are almost
+  * entirely coded in assembly.
+  */
+-void __naked set_fiq_regs(struct pt_regs *regs)
++void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+ {
+       register unsigned long tmp;
+       asm volatile (
+@@ -106,7 +106,7 @@
+       : "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
+ }
+-void __naked get_fiq_regs(struct pt_regs *regs)
++void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+ {
+       register unsigned long tmp;
+       asm volatile (
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/irq.c linux-2.6.29-rc3.owrt/arch/arm/kernel/irq.c
+--- linux-2.6.29.owrt/arch/arm/kernel/irq.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/irq.c        2009-05-10 23:48:27.000000000 +0200
+@@ -101,7 +101,7 @@
+ /* Handle bad interrupts */
+ static struct irq_desc bad_irq_desc = {
+       .handle_irq = handle_bad_irq,
+-      .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
++      .lock = SPIN_LOCK_UNLOCKED
+ };
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/machine_kexec.c linux-2.6.29-rc3.owrt/arch/arm/kernel/machine_kexec.c
+--- linux-2.6.29.owrt/arch/arm/kernel/machine_kexec.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/machine_kexec.c      2009-05-10 23:48:27.000000000 +0200
+@@ -13,8 +13,8 @@
+ #include <asm/cacheflush.h>
+ #include <asm/mach-types.h>
+-extern const unsigned char relocate_new_kernel[];
+-extern const unsigned int relocate_new_kernel_size;
++const extern unsigned char relocate_new_kernel[];
++const extern unsigned int relocate_new_kernel_size;
+ extern void setup_mm_for_reboot(char mode);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/kernel/setup.c linux-2.6.29-rc3.owrt/arch/arm/kernel/setup.c
+--- linux-2.6.29.owrt/arch/arm/kernel/setup.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/kernel/setup.c      2009-05-10 23:48:27.000000000 +0200
+@@ -233,13 +233,12 @@
+       unsigned int cachetype = read_cpuid_cachetype();
+       unsigned int arch = cpu_architecture();
+-      if (arch >= CPU_ARCH_ARMv6) {
+-              if ((cachetype & (7 << 29)) == 4 << 29) {
+-                      /* ARMv7 register format */
+-                      cacheid = CACHEID_VIPT_NONALIASING;
+-                      if ((cachetype & (3 << 14)) == 1 << 14)
+-                              cacheid |= CACHEID_ASID_TAGGED;
+-              } else if (cachetype & (1 << 23))
++      if (arch >= CPU_ARCH_ARMv7) {
++              cacheid = CACHEID_VIPT_NONALIASING;
++              if ((cachetype & (3 << 14)) == 1 << 14)
++                      cacheid |= CACHEID_ASID_TAGGED;
++      } else if (arch >= CPU_ARCH_ARMv6) {
++              if (cachetype & (1 << 23))
+                       cacheid = CACHEID_VIPT_ALIASING;
+               else
+                       cacheid = CACHEID_VIPT_NONALIASING;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/at91cap9_devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91cap9_devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/at91cap9_devices.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91cap9_devices.c        2009-05-10 23:48:27.000000000 +0200
+@@ -697,7 +697,7 @@
+  *  Watchdog
+  * -------------------------------------------------------------------- */
+-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ static struct platform_device at91cap9_wdt_device = {
+       .name           = "at91_wdt",
+       .id             = -1,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9260_devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9260_devices.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9260_devices.c     2009-05-10 23:48:27.000000000 +0200
+@@ -643,7 +643,7 @@
+  *  Watchdog
+  * -------------------------------------------------------------------- */
+-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ static struct platform_device at91sam9260_wdt_device = {
+       .name           = "at91_wdt",
+       .id             = -1,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9261_devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9261_devices.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9261_devices.c     2009-05-10 23:48:27.000000000 +0200
+@@ -621,7 +621,7 @@
+  *  Watchdog
+  * -------------------------------------------------------------------- */
+-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ static struct platform_device at91sam9261_wdt_device = {
+       .name           = "at91_wdt",
+       .id             = -1,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9263_devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9263_devices.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9263_devices.c     2009-05-10 23:48:27.000000000 +0200
+@@ -347,111 +347,6 @@
+ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+ #endif
+-/* --------------------------------------------------------------------
+- *  Compact Flash (PCMCIA or IDE)
+- * -------------------------------------------------------------------- */
+-
+-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+-    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+-
+-static struct at91_cf_data cf0_data;
+-
+-static struct resource cf0_resources[] = {
+-      [0] = {
+-              .start  = AT91_CHIPSELECT_4,
+-              .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
+-              .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+-      }
+-};
+-
+-static struct platform_device cf0_device = {
+-      .id             = 0,
+-      .dev            = {
+-                              .platform_data  = &cf0_data,
+-      },
+-      .resource       = cf0_resources,
+-      .num_resources  = ARRAY_SIZE(cf0_resources),
+-};
+-
+-static struct at91_cf_data cf1_data;
+-
+-static struct resource cf1_resources[] = {
+-      [0] = {
+-              .start  = AT91_CHIPSELECT_5,
+-              .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
+-              .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+-      }
+-};
+-
+-static struct platform_device cf1_device = {
+-      .id             = 1,
+-      .dev            = {
+-                              .platform_data  = &cf1_data,
+-      },
+-      .resource       = cf1_resources,
+-      .num_resources  = ARRAY_SIZE(cf1_resources),
+-};
+-
+-void __init at91_add_device_cf(struct at91_cf_data *data)
+-{
+-      unsigned long ebi0_csa;
+-      struct platform_device *pdev;
+-
+-      if (!data)
+-              return;
+-
+-      /*
+-       * assign CS4 or CS5 to SMC with Compact Flash logic support,
+-       * we assume SMC timings are configured by board code,
+-       * except True IDE where timings are controlled by driver
+-       */
+-      ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+-      switch (data->chipselect) {
+-      case 4:
+-              at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+-              ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+-              cf0_data = *data;
+-              pdev = &cf0_device;
+-              break;
+-      case 5:
+-              at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+-              ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+-              cf1_data = *data;
+-              pdev = &cf1_device;
+-              break;
+-      default:
+-              printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+-                     data->chipselect);
+-              return;
+-      }
+-      at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+-
+-      if (data->det_pin) {
+-              at91_set_gpio_input(data->det_pin, 1);
+-              at91_set_deglitch(data->det_pin, 1);
+-      }
+-
+-      if (data->irq_pin) {
+-              at91_set_gpio_input(data->irq_pin, 1);
+-              at91_set_deglitch(data->irq_pin, 1);
+-      }
+-
+-      if (data->vcc_pin)
+-              /* initially off */
+-              at91_set_gpio_output(data->vcc_pin, 0);
+-
+-      /* enable EBI controlled pins */
+-      at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+-      at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+-      at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+-      at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+-
+-      pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+-      platform_device_register(pdev);
+-}
+-#else
+-void __init at91_add_device_cf(struct at91_cf_data *data) {}
+-#endif
+ /* --------------------------------------------------------------------
+  *  NAND / SmartMedia
+@@ -959,7 +854,7 @@
+  *  Watchdog
+  * -------------------------------------------------------------------- */
+-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ static struct platform_device at91sam9263_wdt_device = {
+       .name           = "at91_wdt",
+       .id             = -1,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9rl_devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/at91sam9rl_devices.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/at91sam9rl_devices.c      2009-05-10 23:48:27.000000000 +0200
+@@ -609,7 +609,7 @@
+  *  Watchdog
+  * -------------------------------------------------------------------- */
+-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ static struct platform_device at91sam9rl_wdt_device = {
+       .name           = "at91_wdt",
+       .id             = -1,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/gpio.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/gpio.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/gpio.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/gpio.c    2009-05-10 23:48:27.000000000 +0200
+@@ -490,8 +490,7 @@
+ /*--------------------------------------------------------------------------*/
+-/*
+- * This lock class tells lockdep that GPIO irqs are in a different
++/* This lock class tells lockdep that GPIO irqs are in a different
+  * category than their parents, so it won't report false recursion.
+  */
+ static struct lock_class_key gpio_lock_class;
+@@ -510,6 +509,9 @@
+               unsigned        id = this->id;
+               unsigned        i;
++              /* enable PIO controller's clock */
++              clk_enable(this->clock);
++
+               __raw_writel(~0, this->regbase + PIO_IDR);
+               for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+@@ -554,14 +556,7 @@
+               data->chipbase = PIN_BASE + i * 32;
+               data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+-              /* enable PIO controller's clock */
+-              clk_enable(data->clock);
+-
+-              /*
+-               * Some processors share peripheral ID between multiple GPIO banks.
+-               *  SAM9263 (PIOC, PIOD, PIOE)
+-               *  CAP9 (PIOA, PIOB, PIOC, PIOD)
+-               */
++              /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+               if (last && last->id == data->id)
+                       last->next = data;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/include/mach/board.h linux-2.6.29-rc3.owrt/arch/arm/mach-at91/include/mach/board.h
+--- linux-2.6.29.owrt/arch/arm/mach-at91/include/mach/board.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/include/mach/board.h      2009-05-10 23:48:27.000000000 +0200
+@@ -56,9 +56,6 @@
+       u8      vcc_pin;                /* power switching */
+       u8      rst_pin;                /* card reset */
+       u8      chipselect;             /* EBI Chip Select number */
+-      u8      flags;
+-#define AT91_CF_TRUE_IDE      0x01
+-#define AT91_IDE_SWAP_A0_A2   0x02
+ };
+ extern void __init at91_add_device_cf(struct at91_cf_data *data);
+@@ -96,7 +93,6 @@
+       u8              enable_pin;     /* chip enable */
+       u8              det_pin;        /* card detect */
+       u8              rdy_pin;        /* ready/busy */
+-      u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
+       u8              ale;            /* address line number connected to ALE */
+       u8              cle;            /* address line number connected to CLE */
+       u8              bus_width_16;   /* buswidth is 16 bit */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-at91/pm.c linux-2.6.29-rc3.owrt/arch/arm/mach-at91/pm.c
+--- linux-2.6.29.owrt/arch/arm/mach-at91/pm.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-at91/pm.c      2009-05-10 23:48:27.000000000 +0200
+@@ -332,6 +332,7 @@
+                       at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+ error:
++      sdram_selfrefresh_disable();
+       target_state = PM_SUSPEND_ON;
+       at91_irq_resume();
+       at91_gpio_resume();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-davinci/board-evm.c linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/board-evm.c
+--- linux-2.6.29.owrt/arch/arm/mach-davinci/board-evm.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/board-evm.c    2009-05-10 23:48:27.000000000 +0200
+@@ -311,9 +311,6 @@
+       gpio_request(gpio + 7, "nCF_SEL");
+       gpio_direction_output(gpio + 7, 1);
+-      /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+-      setup_usb(500, 8);
+-
+       return 0;
+ }
+@@ -420,6 +417,9 @@
+       platform_add_devices(davinci_evm_devices,
+                            ARRAY_SIZE(davinci_evm_devices));
+       evm_init_i2c();
++
++      /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
++      setup_usb(500, 8);
+ }
+ static __init void davinci_evm_irq_init(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-davinci/clock.c linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/clock.c
+--- linux-2.6.29.owrt/arch/arm/mach-davinci/clock.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/clock.c        2009-05-10 23:48:27.000000000 +0200
+@@ -231,11 +231,6 @@
+               .lpsc = DAVINCI_LPSC_GPIO,
+       },
+       {
+-              .name = "usb",
+-              .rate = &commonrate,
+-              .lpsc = DAVINCI_LPSC_USB,
+-      },
+-      {
+               .name = "AEMIFCLK",
+               .rate = &commonrate,
+               .lpsc = DAVINCI_LPSC_AEMIF,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-davinci/usb.c linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/usb.c
+--- linux-2.6.29.owrt/arch/arm/mach-davinci/usb.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-davinci/usb.c  2009-05-10 23:48:27.000000000 +0200
+@@ -47,7 +47,6 @@
+ #elif defined(CONFIG_USB_MUSB_HOST)
+       .mode           = MUSB_HOST,
+ #endif
+-      .clock          = "usb",
+       .config         = &musb_config,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/gesbc9312.h linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+--- linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/gesbc9312.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/gesbc9312.h        2009-05-10 23:48:27.000000000 +0200
+@@ -0,0 +1,3 @@
++/*
++ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
++ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/hardware.h linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/hardware.h
+--- linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/hardware.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/hardware.h 2009-05-10 23:48:27.000000000 +0200
+@@ -10,6 +10,7 @@
+ #include "platform.h"
++#include "gesbc9312.h"
+ #include "ts72xx.h"
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/platform.h linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/platform.h
+--- linux-2.6.29.owrt/arch/arm/mach-ep93xx/include/mach/platform.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-ep93xx/include/mach/platform.h 2009-05-10 23:48:27.000000000 +0200
+@@ -4,8 +4,6 @@
+ #ifndef __ASSEMBLY__
+-struct i2c_board_info;
+-
+ struct ep93xx_eth_data
+ {
+       unsigned char   dev_addr[6];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-kirkwood/irq.c linux-2.6.29-rc3.owrt/arch/arm/mach-kirkwood/irq.c
+--- linux-2.6.29.owrt/arch/arm/mach-kirkwood/irq.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-kirkwood/irq.c 2009-05-10 23:48:27.000000000 +0200
+@@ -42,7 +42,7 @@
+       writel(0, GPIO_EDGE_CAUSE(32));
+       for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
+-              set_irq_chip(i, &orion_gpio_irq_chip);
++              set_irq_chip(i, &orion_gpio_irq_level_chip);
+               set_irq_handler(i, handle_level_irq);
+               irq_desc[i].status |= IRQ_LEVEL;
+               set_irq_flags(i, IRQF_VALID);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-msm/board-halibut.c linux-2.6.29-rc3.owrt/arch/arm/mach-msm/board-halibut.c
+--- linux-2.6.29.owrt/arch/arm/mach-msm/board-halibut.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-msm/board-halibut.c    2009-05-10 23:48:27.000000000 +0200
+@@ -27,7 +27,6 @@
+ #include <asm/mach/map.h>
+ #include <asm/mach/flash.h>
+-#include <mach/irqs.h>
+ #include <mach/board.h>
+ #include <mach/msm_iomap.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-mv78xx0/irq.c linux-2.6.29-rc3.owrt/arch/arm/mach-mv78xx0/irq.c
+--- linux-2.6.29.owrt/arch/arm/mach-mv78xx0/irq.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-mv78xx0/irq.c  2009-05-10 23:48:27.000000000 +0200
+@@ -40,7 +40,7 @@
+       writel(0, GPIO_EDGE_CAUSE(0));
+       for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
+-              set_irq_chip(i, &orion_gpio_irq_chip);
++              set_irq_chip(i, &orion_gpio_irq_level_chip);
+               set_irq_handler(i, handle_level_irq);
+               irq_desc[i].status |= IRQ_LEVEL;
+               set_irq_flags(i, IRQF_VALID);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-mx1/devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-mx1/devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-mx1/devices.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-mx1/devices.c  2009-05-10 23:48:27.000000000 +0200
+@@ -23,8 +23,6 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
+-
+-#include <mach/irqs.h>
+ #include <mach/hardware.h>
+ static struct resource imx_csi_resources[] = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-mx1/mx1ads.c linux-2.6.29-rc3.owrt/arch/arm/mach-mx1/mx1ads.c
+--- linux-2.6.29.owrt/arch/arm/mach-mx1/mx1ads.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-mx1/mx1ads.c   2009-05-10 23:48:27.000000000 +0200
+@@ -21,7 +21,6 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/time.h>
+-#include <mach/irqs.h>
+ #include <mach/hardware.h>
+ #include <mach/common.h>
+ #include <mach/imx-uart.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap1/devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap1/devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap1/devices.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap1/devices.c        2009-05-10 23:48:27.000000000 +0200
+@@ -181,7 +181,7 @@
+               }
+               size = OMAP1_MMC_SIZE;
+-              omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
++              omap_mmc_add(i, base, size, irq, mmc_data[i]);
+       };
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap1/mcbsp.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap1/mcbsp.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap1/mcbsp.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap1/mcbsp.c  2009-05-10 23:48:27.000000000 +0200
+@@ -28,8 +28,81 @@
+ #define DPS_RSTCT2_PER_EN     (1 << 0)
+ #define DSP_RSTCT2_WD_PER_EN  (1 << 1)
++struct mcbsp_internal_clk {
++      struct clk clk;
++      struct clk **childs;
++      int n_childs;
++};
++
+ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+-const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
++static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
++{
++      const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
++      int i;
++
++      mclk->n_childs = ARRAY_SIZE(clk_names);
++      mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
++                              GFP_KERNEL);
++
++      for (i = 0; i < mclk->n_childs; i++) {
++              /* We fake a platform device to get correct device id */
++              struct platform_device pdev;
++
++              pdev.dev.bus = &platform_bus_type;
++              pdev.id = mclk->clk.id;
++              mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
++              if (IS_ERR(mclk->childs[i]))
++                      printk(KERN_ERR "Could not get clock %s (%d).\n",
++                              clk_names[i], mclk->clk.id);
++      }
++}
++
++static int omap_mcbsp_clk_enable(struct clk *clk)
++{
++      struct mcbsp_internal_clk *mclk = container_of(clk,
++                                      struct mcbsp_internal_clk, clk);
++      int i;
++
++      for (i = 0; i < mclk->n_childs; i++)
++              clk_enable(mclk->childs[i]);
++      return 0;
++}
++
++static void omap_mcbsp_clk_disable(struct clk *clk)
++{
++      struct mcbsp_internal_clk *mclk = container_of(clk,
++                                      struct mcbsp_internal_clk, clk);
++      int i;
++
++      for (i = 0; i < mclk->n_childs; i++)
++              clk_disable(mclk->childs[i]);
++}
++
++static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 1,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 3,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++};
++
++#define omap_mcbsp_clks_size  ARRAY_SIZE(omap_mcbsp_clks)
++#else
++#define omap_mcbsp_clks_size  0
++static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
++static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
++{ }
+ #endif
+ static void omap1_mcbsp_request(unsigned int id)
+@@ -94,9 +167,8 @@
+               .rx_irq         = INT_McBSP1RX,
+               .tx_irq         = INT_McBSP1TX,
+               .ops            = &omap1_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 3,
+-      },
++              .clk_name       = "mcbsp_clk",
++              },
+       {
+               .phys_base      = OMAP1510_MCBSP2_BASE,
+               .dma_rx_sync    = OMAP_DMA_MCBSP2_RX,
+@@ -112,8 +184,7 @@
+               .rx_irq         = INT_McBSP3RX,
+               .tx_irq         = INT_McBSP3TX,
+               .ops            = &omap1_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 3,
++              .clk_name       = "mcbsp_clk",
+       },
+ };
+ #define OMAP15XX_MCBSP_PDATA_SZ               ARRAY_SIZE(omap15xx_mcbsp_pdata)
+@@ -131,8 +202,7 @@
+               .rx_irq         = INT_McBSP1RX,
+               .tx_irq         = INT_McBSP1TX,
+               .ops            = &omap1_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 3,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP1610_MCBSP2_BASE,
+@@ -149,8 +219,7 @@
+               .rx_irq         = INT_McBSP3RX,
+               .tx_irq         = INT_McBSP3TX,
+               .ops            = &omap1_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 3,
++              .clk_name       = "mcbsp_clk",
+       },
+ };
+ #define OMAP16XX_MCBSP_PDATA_SZ               ARRAY_SIZE(omap16xx_mcbsp_pdata)
+@@ -161,6 +230,15 @@
+ int __init omap1_mcbsp_init(void)
+ {
++      int i;
++
++      for (i = 0; i < omap_mcbsp_clks_size; i++) {
++              if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
++                      omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
++                      clk_register(&omap_mcbsp_clks[i].clk);
++              }
++      }
++
+       if (cpu_is_omap730())
+               omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+       if (cpu_is_omap15xx())
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/board-ldp.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/board-ldp.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/board-ldp.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/board-ldp.c      2009-05-10 23:48:27.000000000 +0200
+@@ -81,7 +81,7 @@
+       }
+       ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
+-      ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
++      ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+       udelay(100);
+       eth_gpio = LDP_SMC911X_GPIO;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/board-omap3beagle.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/board-omap3beagle.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/board-omap3beagle.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/board-omap3beagle.c      2009-05-10 23:48:27.000000000 +0200
+@@ -178,9 +178,7 @@
+ #ifdef CONFIG_I2C2_OMAP_BEAGLE
+       omap_register_i2c_bus(2, 400, NULL, 0);
+ #endif
+-      /* Bus 3 is attached to the DVI port where devices like the pico DLP
+-       * projector don't work reliably with 400kHz */
+-      omap_register_i2c_bus(3, 100, NULL, 0);
++      omap_register_i2c_bus(3, 400, NULL, 0);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/clock.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/clock.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/clock.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/clock.c  2009-05-10 23:48:27.000000000 +0200
+@@ -565,7 +565,7 @@
+  *
+  * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+  * find the corresponding register field value.  The return register value is
+- * the value before left-shifting.  Returns ~0 on error
++ * the value before left-shifting.  Returns 0xffffffff on error
+  */
+ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+ {
+@@ -577,7 +577,7 @@
+       clks = omap2_get_clksel_by_parent(clk, clk->parent);
+       if (clks == NULL)
+-              return ~0;
++              return 0;
+       for (clkr = clks->rates; clkr->div; clkr++) {
+               if ((clkr->flags & cpu_mask) && (clkr->div == div))
+@@ -588,7 +588,7 @@
+               printk(KERN_ERR "clock: Could not find divisor %d for "
+                      "clock %s parent %s\n", div, clk->name,
+                      clk->parent->name);
+-              return ~0;
++              return 0;
+       }
+       return clkr->val;
+@@ -708,7 +708,7 @@
+               return 0;
+       for (clkr = clks->rates; clkr->div; clkr++) {
+-              if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
++              if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+                       break; /* Found the default rate for this platform */
+       }
+@@ -746,7 +746,7 @@
+               return -EINVAL;
+       if (clk->usecount > 0)
+-              omap2_clk_disable(clk);
++              _omap2_clk_disable(clk);
+       /* Set new source value (previous dividers if any in effect) */
+       reg_val = __raw_readl(src_addr) & ~field_mask;
+@@ -759,10 +759,10 @@
+               wmb();
+       }
+-      clk->parent = new_parent;
+-
+       if (clk->usecount > 0)
+-              omap2_clk_enable(clk);
++              _omap2_clk_enable(clk);
++
++      clk->parent = new_parent;
+       /* CLKSEL clocks follow their parents' rates, divided by a divisor */
+       clk->rate = new_parent->rate;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/devices.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/devices.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/devices.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/devices.c        2009-05-10 23:48:27.000000000 +0200
+@@ -421,7 +421,6 @@
+                       int nr_controllers)
+ {
+       int i;
+-      char *name;
+       for (i = 0; i < nr_controllers; i++) {
+               unsigned long base, size;
+@@ -451,14 +450,12 @@
+                       continue;
+               }
+-              if (cpu_is_omap2420()) {
++              if (cpu_is_omap2420())
+                       size = OMAP2420_MMC_SIZE;
+-                      name = "mmci-omap";
+-              } else {
++              else
+                       size = HSMMC_SIZE;
+-                      name = "mmci-omap-hs";
+-              }
+-              omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
++
++              omap_mmc_add(i, base, size, irq, mmc_data[i]);
+       };
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/id.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/id.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/id.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/id.c     2009-05-10 23:48:27.000000000 +0200
+@@ -172,13 +172,9 @@
+                       omap_revision = OMAP3430_REV_ES3_0;
+                       rev_name = "ES3.0";
+                       break;
+-              case 4:
+-                      omap_revision = OMAP3430_REV_ES3_1;
+-                      rev_name = "ES3.1";
+-                      break;
+               default:
+                       /* Use the latest known revision as default */
+-                      omap_revision = OMAP3430_REV_ES3_1;
++                      omap_revision = OMAP3430_REV_ES3_0;
+                       rev_name = "Unknown revision\n";
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/irq.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/irq.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/irq.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/irq.c    2009-05-10 23:48:27.000000000 +0200
+@@ -134,7 +134,6 @@
+       .ack    = omap_mask_ack_irq,
+       .mask   = omap_mask_irq,
+       .unmask = omap_unmask_irq,
+-      .disable = omap_mask_irq,
+ };
+ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/mcbsp.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/mcbsp.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/mcbsp.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/mcbsp.c  2009-05-10 23:48:27.000000000 +0200
+@@ -24,7 +24,106 @@
+ #include <mach/cpu.h>
+ #include <mach/mcbsp.h>
+-const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
++struct mcbsp_internal_clk {
++      struct clk clk;
++      struct clk **childs;
++      int n_childs;
++};
++
++#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
++static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
++{
++      const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
++      int i;
++
++      mclk->n_childs = ARRAY_SIZE(clk_names);
++      mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
++                              GFP_KERNEL);
++
++      for (i = 0; i < mclk->n_childs; i++) {
++              /* We fake a platform device to get correct device id */
++              struct platform_device pdev;
++
++              pdev.dev.bus = &platform_bus_type;
++              pdev.id = mclk->clk.id;
++              mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
++              if (IS_ERR(mclk->childs[i]))
++                      printk(KERN_ERR "Could not get clock %s (%d).\n",
++                              clk_names[i], mclk->clk.id);
++      }
++}
++
++static int omap_mcbsp_clk_enable(struct clk *clk)
++{
++      struct mcbsp_internal_clk *mclk = container_of(clk,
++                                      struct mcbsp_internal_clk, clk);
++      int i;
++
++      for (i = 0; i < mclk->n_childs; i++)
++              clk_enable(mclk->childs[i]);
++      return 0;
++}
++
++static void omap_mcbsp_clk_disable(struct clk *clk)
++{
++      struct mcbsp_internal_clk *mclk = container_of(clk,
++                                      struct mcbsp_internal_clk, clk);
++      int i;
++
++      for (i = 0; i < mclk->n_childs; i++)
++              clk_disable(mclk->childs[i]);
++}
++
++static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 1,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 2,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 3,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 4,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++      {
++              .clk = {
++                      .name           = "mcbsp_clk",
++                      .id             = 5,
++                      .enable         = omap_mcbsp_clk_enable,
++                      .disable        = omap_mcbsp_clk_disable,
++              },
++      },
++};
++
++#define omap_mcbsp_clks_size  ARRAY_SIZE(omap_mcbsp_clks)
++#else
++#define omap_mcbsp_clks_size  0
++static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
++static inline void omap_mcbsp_clk_init(struct clk *clk)
++{ }
++#endif
+ static void omap2_mcbsp2_mux_setup(void)
+ {
+@@ -57,8 +156,7 @@
+               .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP24XX_MCBSP2_BASE,
+@@ -67,8 +165,7 @@
+               .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+ };
+ #define OMAP2420_MCBSP_PDATA_SZ               ARRAY_SIZE(omap2420_mcbsp_pdata)
+@@ -86,8 +183,7 @@
+               .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP24XX_MCBSP2_BASE,
+@@ -96,8 +192,7 @@
+               .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP2430_MCBSP3_BASE,
+@@ -106,8 +201,7 @@
+               .rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP2430_MCBSP4_BASE,
+@@ -116,8 +210,7 @@
+               .rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP2430_MCBSP5_BASE,
+@@ -126,8 +219,7 @@
+               .rx_irq         = INT_24XX_MCBSP5_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP5_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+ };
+ #define OMAP2430_MCBSP_PDATA_SZ               ARRAY_SIZE(omap2430_mcbsp_pdata)
+@@ -145,8 +237,7 @@
+               .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP34XX_MCBSP2_BASE,
+@@ -155,8 +246,7 @@
+               .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP34XX_MCBSP3_BASE,
+@@ -165,8 +255,7 @@
+               .rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP34XX_MCBSP4_BASE,
+@@ -175,8 +264,7 @@
+               .rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+       {
+               .phys_base      = OMAP34XX_MCBSP5_BASE,
+@@ -185,8 +273,7 @@
+               .rx_irq         = INT_24XX_MCBSP5_IRQ_RX,
+               .tx_irq         = INT_24XX_MCBSP5_IRQ_TX,
+               .ops            = &omap2_mcbsp_ops,
+-              .clk_names      = clk_names,
+-              .num_clks       = 2,
++              .clk_name       = "mcbsp_clk",
+       },
+ };
+ #define OMAP34XX_MCBSP_PDATA_SZ               ARRAY_SIZE(omap34xx_mcbsp_pdata)
+@@ -197,6 +284,14 @@
+ static int __init omap2_mcbsp_init(void)
+ {
++      int i;
++
++      for (i = 0; i < omap_mcbsp_clks_size; i++) {
++              /* Once we call clk_get inside init, we do not register it */
++              omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
++              clk_register(&omap_mcbsp_clks[i].clk);
++      }
++
+       if (cpu_is_omap2420())
+               omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
+       if (cpu_is_omap2430())
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/sleep24xx.S linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/sleep24xx.S
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/sleep24xx.S  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/sleep24xx.S      2009-05-10 23:48:28.000000000 +0200
+@@ -93,8 +93,9 @@
+       orr     r4, r4, #0x40           @ enable self refresh on idle req
+       mov     r5, #0x2000             @ set delay (DPLL relock + DLL relock)
+       str     r4, [r2]                @ make it so
++      mov     r2, #0
+       nop
+-      mcr     p15, 0, r3, c7, c0, 4   @ wait for interrupt
++      mcr     p15, 0, r2, c7, c0, 4   @ wait for interrupt
+       nop
+ loop:
+       subs    r5, r5, #0x1            @ awake, wait just a bit
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-omap2/timer-gp.c linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/timer-gp.c
+--- linux-2.6.29.owrt/arch/arm/mach-omap2/timer-gp.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-omap2/timer-gp.c       2009-05-10 23:48:28.000000000 +0200
+@@ -118,8 +118,7 @@
+       clockevent_gpt.max_delta_ns =
+               clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+       clockevent_gpt.min_delta_ns =
+-              clockevent_delta2ns(3, &clockevent_gpt);
+-              /* Timer internal resynch latency. */
++              clockevent_delta2ns(1, &clockevent_gpt);
+       clockevent_gpt.cpumask = cpumask_of(0);
+       clockevents_register_device(&clockevent_gpt);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-orion5x/common.c linux-2.6.29-rc3.owrt/arch/arm/mach-orion5x/common.c
+--- linux-2.6.29.owrt/arch/arm/mach-orion5x/common.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-orion5x/common.c       2009-05-10 23:48:28.000000000 +0200
+@@ -431,10 +431,6 @@
+ /*****************************************************************************
+  * XOR engine
+  ****************************************************************************/
+-struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+-      .dram           = &orion5x_mbus_dram_info,
+-};
+-
+ static struct resource orion5x_xor_shared_resources[] = {
+       {
+               .name   = "xor low",
+@@ -452,9 +448,6 @@
+ static struct platform_device orion5x_xor_shared = {
+       .name           = MV_XOR_SHARED_NAME,
+       .id             = 0,
+-      .dev            = {
+-              .platform_data  = &orion5x_xor_shared_data,
+-      },
+       .num_resources  = ARRAY_SIZE(orion5x_xor_shared_resources),
+       .resource       = orion5x_xor_shared_resources,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-orion5x/irq.c linux-2.6.29-rc3.owrt/arch/arm/mach-orion5x/irq.c
+--- linux-2.6.29.owrt/arch/arm/mach-orion5x/irq.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-orion5x/irq.c  2009-05-10 23:48:28.000000000 +0200
+@@ -44,7 +44,7 @@
+        * User can use set_type() if he wants to use edge types handlers.
+        */
+       for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
+-              set_irq_chip(i, &orion_gpio_irq_chip);
++              set_irq_chip(i, &orion_gpio_irq_level_chip);
+               set_irq_handler(i, handle_level_irq);
+               irq_desc[i].status |= IRQ_LEVEL;
+               set_irq_flags(i, IRQF_VALID);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-pxa/dma.c linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/dma.c
+--- linux-2.6.29.owrt/arch/arm/mach-pxa/dma.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/dma.c      2009-05-10 23:48:28.000000000 +0200
+@@ -121,16 +121,6 @@
+       if (dma_channels == NULL)
+               return -ENOMEM;
+-      /* dma channel priorities on pxa2xx processors:
+-       * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
+-       * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
+-       * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
+-       */
+-      for (i = 0; i < num_ch; i++) {
+-              DCSR(i) = 0;
+-              dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+-      }
+-
+       ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+       if (ret) {
+               printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+@@ -138,6 +128,14 @@
+               return ret;
+       }
++      /* dma channel priorities on pxa2xx processors:
++       * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
++       * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
++       * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
++       */
++      for (i = 0; i < num_ch; i++)
++              dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
++
+       num_dma_channels = num_ch;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-pxa/include/mach/regs-ac97.h linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/include/mach/regs-ac97.h
+--- linux-2.6.29.owrt/arch/arm/mach-pxa/include/mach/regs-ac97.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/include/mach/regs-ac97.h   2009-05-10 23:48:28.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef __ASM_ARCH_REGS_AC97_H
+ #define __ASM_ARCH_REGS_AC97_H
+-#include <mach/hardware.h>
+-
+ /*
+  * AC97 Controller registers
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-pxa/include/mach/regs-ssp.h linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/include/mach/regs-ssp.h
+--- linux-2.6.29.owrt/arch/arm/mach-pxa/include/mach/regs-ssp.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/include/mach/regs-ssp.h    2009-05-10 23:48:28.000000000 +0200
+@@ -41,9 +41,6 @@
+ #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ #define SSCR0_SCR     (0x000fff00)    /* Serial Clock Rate (mask) */
+ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+-#endif
+-
+-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ #define SSCR0_EDSS    (1 << 20)       /* Extended data size select */
+ #define SSCR0_NCS     (1 << 21)       /* Network clock select */
+ #define SSCR0_RIM     (1 << 22)       /* Receive FIFO overrrun interrupt mask */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-pxa/pxa300.c linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/pxa300.c
+--- linux-2.6.29.owrt/arch/arm/mach-pxa/pxa300.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/pxa300.c   2009-05-10 23:48:28.000000000 +0200
+@@ -88,13 +88,13 @@
+ static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+ static struct clk_lookup common_clkregs[] = {
+-      INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
++      INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
+ };
+ static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
+ static struct clk_lookup pxa310_clkregs[] = {
+-      INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
++      INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
+ };
+ static int __init pxa300_init(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-pxa/pxa320.c linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/pxa320.c
+--- linux-2.6.29.owrt/arch/arm/mach-pxa/pxa320.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-pxa/pxa320.c   2009-05-10 23:48:28.000000000 +0200
+@@ -83,7 +83,7 @@
+ static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+ static struct clk_lookup pxa320_clkregs[] = {
+-      INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
++      INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
+ };
+ static int __init pxa320_init(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-rpc/riscpc.c linux-2.6.29-rc3.owrt/arch/arm/mach-rpc/riscpc.c
+--- linux-2.6.29.owrt/arch/arm/mach-rpc/riscpc.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-rpc/riscpc.c   2009-05-10 23:48:28.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/serial_8250.h>
+ #include <linux/ata_platform.h>
+ #include <linux/io.h>
+-#include <linux/i2c.h>
+ #include <asm/elf.h>
+ #include <asm/mach-types.h>
+@@ -202,13 +201,8 @@
+       &pata_device,
+ };
+-static struct i2c_board_info i2c_rtc = {
+-      I2C_BOARD_INFO("pcf8583", 0x50)
+-};
+-
+ static int __init rpc_init(void)
+ {
+-      i2c_register_board_info(0, &i2c_rtc, 1);
+       return platform_add_devices(devs, ARRAY_SIZE(devs));
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c
+--- linux-2.6.29.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c        2009-05-10 23:48:28.000000000 +0200
+@@ -129,7 +129,7 @@
+       .vidcon1        = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ };
+-static struct map_desc smdk6410_iodesc[] = {};
++struct map_desc smdk6410_iodesc[] = {};
+ static struct platform_device *smdk6410_devices[] __initdata = {
+ #ifdef CONFIG_SMDK6410_SD_CH0
+@@ -146,7 +146,7 @@
+ static struct i2c_board_info i2c_devs0[] __initdata = {
+       { I2C_BOARD_INFO("24c08", 0x50), },
+-      { I2C_BOARD_INFO("wm8580", 0x1b), },
++      { I2C_BOARD_INFO("WM8580", 0X1b), },
+ };
+ static struct i2c_board_info i2c_devs1[] __initdata = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mach-sa1100/generic.c linux-2.6.29-rc3.owrt/arch/arm/mach-sa1100/generic.c
+--- linux-2.6.29.owrt/arch/arm/mach-sa1100/generic.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mach-sa1100/generic.c       2009-05-10 23:48:28.000000000 +0200
+@@ -289,7 +289,7 @@
+ };
+ static struct platform_device sa11x0mtd_device = {
+-      .name           = "sa1100-mtd",
++      .name           = "flash",
+       .id             = -1,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/abort-ev6.S linux-2.6.29-rc3.owrt/arch/arm/mm/abort-ev6.S
+--- linux-2.6.29.owrt/arch/arm/mm/abort-ev6.S  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/abort-ev6.S      2009-05-10 23:48:28.000000000 +0200
+@@ -23,8 +23,7 @@
+ #ifdef CONFIG_CPU_32v6K
+       clrex
+ #else
+-      sub     r1, sp, #4                      @ Get unused stack location
+-      strex   r0, r1, [r1]                    @ Clear the exclusive monitor
++      strex   r0, r1, [sp]                    @ Clear the exclusive monitor
+ #endif
+       mrc     p15, 0, r1, c5, c0, 0           @ get FSR
+       mrc     p15, 0, r0, c6, c0, 0           @ get FAR
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-feroceon.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-feroceon.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-feroceon.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-feroceon.c      2009-05-10 23:48:28.000000000 +0200
+@@ -13,7 +13,7 @@
+ #include <linux/init.h>
+ #include <linux/highmem.h>
+-static void __naked
++static void __attribute__((naked))
+ feroceon_copy_user_page(void *kto, const void *kfrom)
+ {
+       asm("\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-v3.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v3.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-v3.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v3.c    2009-05-10 23:48:28.000000000 +0200
+@@ -15,7 +15,7 @@
+  *
+  * FIXME: do we need to handle cache stuff...
+  */
+-static void __naked
++static void __attribute__((naked))
+ v3_copy_user_page(void *kto, const void *kfrom)
+ {
+       asm("\n\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-v4mc.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4mc.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-v4mc.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4mc.c  2009-05-10 23:48:28.000000000 +0200
+@@ -44,7 +44,7 @@
+  * instruction.  If your processor does not supply this, you have to write your
+  * own copy_user_highpage that does the right thing.
+  */
+-static void __naked
++static void __attribute__((naked))
+ mc_copy_user_page(void *from, void *to)
+ {
+       asm volatile(
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-v4wb.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4wb.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-v4wb.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4wb.c  2009-05-10 23:48:28.000000000 +0200
+@@ -22,7 +22,7 @@
+  * instruction.  If your processor does not supply this, you have to write your
+  * own copy_user_highpage that does the right thing.
+  */
+-static void __naked
++static void __attribute__((naked))
+ v4wb_copy_user_page(void *kto, const void *kfrom)
+ {
+       asm("\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-v4wt.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4wt.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-v4wt.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-v4wt.c  2009-05-10 23:48:28.000000000 +0200
+@@ -20,7 +20,7 @@
+  * dirty data in the cache.  However, we do have to ensure that
+  * subsequent reads are up to date.
+  */
+-static void __naked
++static void __attribute__((naked))
+ v4wt_copy_user_page(void *kto, const void *kfrom)
+ {
+       asm("\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-xsc3.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-xsc3.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-xsc3.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-xsc3.c  2009-05-10 23:48:28.000000000 +0200
+@@ -29,7 +29,7 @@
+  * if we eventually end up using our copied page.
+  *
+  */
+-static void __naked
++static void __attribute__((naked))
+ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
+ {
+       asm("\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/copypage-xscale.c linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-xscale.c
+--- linux-2.6.29.owrt/arch/arm/mm/copypage-xscale.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/copypage-xscale.c        2009-05-10 23:48:28.000000000 +0200
+@@ -42,7 +42,7 @@
+  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
+  * and merged as appropriate.
+  */
+-static void __naked
++static void __attribute__((naked))
+ mc_copy_user_page(void *from, void *to)
+ {
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/dma-mapping.c linux-2.6.29-rc3.owrt/arch/arm/mm/dma-mapping.c
+--- linux-2.6.29.owrt/arch/arm/mm/dma-mapping.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/dma-mapping.c    2009-05-10 23:48:28.000000000 +0200
+@@ -490,30 +490,26 @@
+  */
+ void dma_cache_maint(const void *start, size_t size, int direction)
+ {
+-      void (*inner_op)(const void *, const void *);
+-      void (*outer_op)(unsigned long, unsigned long);
++      const void *end = start + size;
+-      BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
++      BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+       switch (direction) {
+       case DMA_FROM_DEVICE:           /* invalidate only */
+-              inner_op = dmac_inv_range;
+-              outer_op = outer_inv_range;
++              dmac_inv_range(start, end);
++              outer_inv_range(__pa(start), __pa(end));
+               break;
+       case DMA_TO_DEVICE:             /* writeback only */
+-              inner_op = dmac_clean_range;
+-              outer_op = outer_clean_range;
++              dmac_clean_range(start, end);
++              outer_clean_range(__pa(start), __pa(end));
+               break;
+       case DMA_BIDIRECTIONAL:         /* writeback and invalidate */
+-              inner_op = dmac_flush_range;
+-              outer_op = outer_flush_range;
++              dmac_flush_range(start, end);
++              outer_flush_range(__pa(start), __pa(end));
+               break;
+       default:
+               BUG();
+       }
+-
+-      inner_op(start, start + size);
+-      outer_op(__pa(start), __pa(start) + size);
+ }
+ EXPORT_SYMBOL(dma_cache_maint);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/fault-armv.c linux-2.6.29-rc3.owrt/arch/arm/mm/fault-armv.c
+--- linux-2.6.29.owrt/arch/arm/mm/fault-armv.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/fault-armv.c     2009-05-10 23:48:28.000000000 +0200
+@@ -66,10 +66,7 @@
+        * fault (ie, is old), we can safely ignore any issues.
+        */
+       if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
+-              unsigned long pfn = pte_pfn(entry);
+-              flush_cache_page(vma, address, pfn);
+-              outer_flush_range((pfn << PAGE_SHIFT),
+-                                (pfn << PAGE_SHIFT) + PAGE_SIZE);
++              flush_cache_page(vma, address, pte_pfn(entry));
+               pte_val(entry) &= ~L_PTE_MT_MASK;
+               pte_val(entry) |= shared_pte_mask;
+               set_pte_at(vma->vm_mm, address, pte, entry);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/init.c linux-2.6.29-rc3.owrt/arch/arm/mm/init.c
+--- linux-2.6.29.owrt/arch/arm/mm/init.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/init.c   2009-05-10 23:48:28.000000000 +0200
+@@ -382,7 +382,7 @@
+       for_each_node(node)
+               bootmem_free_node(node, mi);
+-      high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
++      high_memory = __va(memend_pfn << PAGE_SHIFT);
+       /*
+        * This doesn't seem to be used by the Linux memory manager any
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/mmap.c linux-2.6.29-rc3.owrt/arch/arm/mm/mmap.c
+--- linux-2.6.29.owrt/arch/arm/mm/mmap.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/mmap.c   2009-05-10 23:48:28.000000000 +0200
+@@ -124,7 +124,7 @@
+ {
+       if (addr < PHYS_OFFSET)
+               return 0;
+-      if (addr + size >= __pa(high_memory - 1))
++      if (addr + size > __pa(high_memory))
+               return 0;
+       return 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/mm/mmu.c linux-2.6.29-rc3.owrt/arch/arm/mm/mmu.c
+--- linux-2.6.29.owrt/arch/arm/mm/mmu.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/mm/mmu.c    2009-05-10 23:48:28.000000000 +0200
+@@ -693,8 +693,7 @@
+                * Check whether this memory bank would entirely overlap
+                * the vmalloc area.
+                */
+-              if (__va(bank->start) >= VMALLOC_MIN ||
+-                  __va(bank->start) < PAGE_OFFSET) {
++              if (__va(bank->start) >= VMALLOC_MIN) {
+                       printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+                              "(vmalloc region overlap).\n",
+                              bank->start, bank->start + bank->size - 1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-mxc/include/mach/mmc.h linux-2.6.29-rc3.owrt/arch/arm/plat-mxc/include/mach/mmc.h
+--- linux-2.6.29.owrt/arch/arm/plat-mxc/include/mach/mmc.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-mxc/include/mach/mmc.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,36 +0,0 @@
+-#ifndef ASMARM_ARCH_MMC_H
+-#define ASMARM_ARCH_MMC_H
+-
+-#include <linux/mmc/host.h>
+-
+-struct device;
+-
+-/* board specific SDHC data, optional.
+- * If not present, a writable card with 3,3V is assumed.
+- */
+-struct imxmmc_platform_data {
+-      /* Return values for the get_ro callback should be:
+-       *   0 for a read/write card
+-       *   1 for a read-only card
+-       *   -ENOSYS when not supported (equal to NULL callback)
+-       *   or a negative errno value when something bad happened
+-       */
+-      int (*get_ro)(struct device *);
+-
+-      /* board specific hook to (de)initialize the SD slot.
+-       * The board code can call 'handler' on a card detection
+-       * change giving data as argument.
+-       */
+-      int (*init)(struct device *dev, irq_handler_t handler, void *data);
+-      void (*exit)(struct device *dev, void *data);
+-
+-      /* available voltages. If not given, assume
+-       * MMC_VDD_32_33 | MMC_VDD_33_34
+-       */
+-      unsigned int ocr_avail;
+-
+-      /* adjust slot voltage */
+-      void (*setpower)(struct device *, unsigned int vdd);
+-};
+-
+-#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/common.c linux-2.6.29-rc3.owrt/arch/arm/plat-omap/common.c
+--- linux-2.6.29.owrt/arch/arm/plat-omap/common.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/common.c  2009-05-10 23:48:28.000000000 +0200
+@@ -200,16 +200,20 @@
+ };
+ /*
++ * Rounds down to nearest nsec.
++ */
++unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
++{
++      return cyc2ns(&clocksource_32k, ticks_32k);
++}
++
++/*
+  * Returns current time from boot in nsecs. It's OK for this to wrap
+  * around for now, as it's just a relative time stamp.
+  */
+ unsigned long long sched_clock(void)
+ {
+-      unsigned long long ret;
+-
+-      ret = (unsigned long long)omap_32k_read();
+-      ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+-      return ret;
++      return omap_32k_ticks_to_nsecs(omap_32k_read());
+ }
+ static int __init omap_init_clocksource_32k(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/devices.c linux-2.6.29-rc3.owrt/arch/arm/plat-omap/devices.c
+--- linux-2.6.29.owrt/arch/arm/plat-omap/devices.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/devices.c 2009-05-10 23:48:28.000000000 +0200
+@@ -200,15 +200,14 @@
+ /*
+  * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
+  */
+-int __init omap_mmc_add(const char *name, int id, unsigned long base,
+-                              unsigned long size, unsigned int irq,
+-                              struct omap_mmc_platform_data *data)
++int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
++              unsigned int irq, struct omap_mmc_platform_data *data)
+ {
+       struct platform_device *pdev;
+       struct resource res[OMAP_MMC_NR_RES];
+       int ret;
+-      pdev = platform_device_alloc(name, id);
++      pdev = platform_device_alloc("mmci-omap", id);
+       if (!pdev)
+               return -ENOMEM;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/dma.c linux-2.6.29-rc3.owrt/arch/arm/plat-omap/dma.c
+--- linux-2.6.29.owrt/arch/arm/plat-omap/dma.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/dma.c     2009-05-10 23:48:28.000000000 +0200
+@@ -709,7 +709,6 @@
+       chan->dev_name = dev_name;
+       chan->callback = callback;
+       chan->data = data;
+-      chan->flags = 0;
+ #ifndef CONFIG_ARCH_OMAP1
+       if (cpu_class_is_omap2()) {
+@@ -1889,11 +1888,11 @@
+               status = dma_read(CSR(ch));
+       }
+-      dma_write(status, CSR(ch));
+-
+       if (likely(dma_chan[ch].callback != NULL))
+               dma_chan[ch].callback(ch, status, dma_chan[ch].data);
++      dma_write(status, CSR(ch));
++
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/common.h linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/common.h
+--- linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/common.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/common.h     2009-05-10 23:48:28.000000000 +0200
+@@ -35,7 +35,7 @@
+ extern struct sys_timer omap_timer;
+ extern void omap_serial_init(void);
+ extern void omap_serial_enable_clocks(int enable);
+-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
++#ifdef CONFIG_I2C_OMAP
+ extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                struct i2c_board_info const *info,
+                                unsigned len);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/cpu.h linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/cpu.h
+--- linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/cpu.h    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/cpu.h        2009-05-10 23:48:28.000000000 +0200
+@@ -339,7 +339,6 @@
+ #define OMAP3430_REV_ES2_0    0x34301034
+ #define OMAP3430_REV_ES2_1    0x34302034
+ #define OMAP3430_REV_ES3_0    0x34303034
+-#define OMAP3430_REV_ES3_1    0x34304034
+ /*
+  * omap_chip bits
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/mcbsp.h linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/mcbsp.h
+--- linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/mcbsp.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/mcbsp.h      2009-05-10 23:48:28.000000000 +0200
+@@ -344,8 +344,7 @@
+       u8 dma_rx_sync, dma_tx_sync;
+       u16 rx_irq, tx_irq;
+       struct omap_mcbsp_ops *ops;
+-      char const **clk_names;
+-      int num_clks;
++      char const *clk_name;
+ };
+ struct omap_mcbsp {
+@@ -377,8 +376,7 @@
+       /* Protect the field .free, while checking if the mcbsp is in use */
+       spinlock_t lock;
+       struct omap_mcbsp_platform_data *pdata;
+-      struct clk **clks;
+-      int num_clks;
++      struct clk *clk;
+ };
+ extern struct omap_mcbsp **mcbsp_ptr;
+ extern int omap_mcbsp_count;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/mmc.h linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/mmc.h
+--- linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/mmc.h    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/mmc.h        2009-05-10 23:48:28.000000000 +0200
+@@ -115,9 +115,8 @@
+                               int nr_controllers);
+ void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                               int nr_controllers);
+-int omap_mmc_add(const char *name, int id, unsigned long base,
+-                              unsigned long size, unsigned int irq,
+-                              struct omap_mmc_platform_data *data);
++int omap_mmc_add(int id, unsigned long base, unsigned long size,
++                      unsigned int irq, struct omap_mmc_platform_data *data);
+ #else
+ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                               int nr_controllers)
+@@ -127,9 +126,8 @@
+                               int nr_controllers)
+ {
+ }
+-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+-                              unsigned long size, unsigned int irq,
+-                              struct omap_mmc_platform_data *data)
++static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
++              unsigned int irq, struct omap_mmc_platform_data *data)
+ {
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/pm.h linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/pm.h
+--- linux-2.6.29.owrt/arch/arm/plat-omap/include/mach/pm.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/include/mach/pm.h 2009-05-10 23:48:28.000000000 +0200
+@@ -108,7 +108,7 @@
+       !defined(CONFIG_ARCH_OMAP15XX) && \
+       !defined(CONFIG_ARCH_OMAP16XX) && \
+       !defined(CONFIG_ARCH_OMAP24XX)
+-#warning "Power management for this processor not implemented yet"
++#error "Power management for this processor not implemented yet"
+ #endif
+ #ifndef __ASSEMBLER__
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/Makefile linux-2.6.29-rc3.owrt/arch/arm/plat-omap/Makefile
+--- linux-2.6.29.owrt/arch/arm/plat-omap/Makefile      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/Makefile  2009-05-10 23:48:28.000000000 +0200
+@@ -18,8 +18,7 @@
+ obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+ obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
+ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
+-i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+-obj-y += $(i2c-omap-m) $(i2c-omap-y)
++obj-$(CONFIG_I2C_OMAP) += i2c.o
+ # OMAP mailbox framework
+ obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-omap/mcbsp.c linux-2.6.29-rc3.owrt/arch/arm/plat-omap/mcbsp.c
+--- linux-2.6.29.owrt/arch/arm/plat-omap/mcbsp.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-omap/mcbsp.c   2009-05-10 23:48:28.000000000 +0200
+@@ -214,7 +214,6 @@
+ int omap_mcbsp_request(unsigned int id)
+ {
+       struct omap_mcbsp *mcbsp;
+-      int i;
+       int err;
+       if (!omap_mcbsp_check_valid_id(id)) {
+@@ -226,8 +225,7 @@
+       if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+               mcbsp->pdata->ops->request(id);
+-      for (i = 0; i < mcbsp->num_clks; i++)
+-              clk_enable(mcbsp->clks[i]);
++      clk_enable(mcbsp->clk);
+       spin_lock(&mcbsp->lock);
+       if (!mcbsp->free) {
+@@ -278,7 +276,6 @@
+ void omap_mcbsp_free(unsigned int id)
+ {
+       struct omap_mcbsp *mcbsp;
+-      int i;
+       if (!omap_mcbsp_check_valid_id(id)) {
+               printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+@@ -289,8 +286,7 @@
+       if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+               mcbsp->pdata->ops->free(id);
+-      for (i = mcbsp->num_clks - 1; i >= 0; i--)
+-              clk_disable(mcbsp->clks[i]);
++      clk_disable(mcbsp->clk);
+       spin_lock(&mcbsp->lock);
+       if (mcbsp->free) {
+@@ -876,7 +872,6 @@
+       struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+       struct omap_mcbsp *mcbsp;
+       int id = pdev->id - 1;
+-      int i;
+       int ret = 0;
+       if (!pdata) {
+@@ -921,25 +916,14 @@
+       mcbsp->dma_rx_sync = pdata->dma_rx_sync;
+       mcbsp->dma_tx_sync = pdata->dma_tx_sync;
+-      if (pdata->num_clks) {
+-              mcbsp->num_clks = pdata->num_clks;
+-              mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
+-                                      GFP_KERNEL);
+-              if (!mcbsp->clks) {
+-                      ret = -ENOMEM;
+-                      goto exit;
+-              }
+-              for (i = 0; i < mcbsp->num_clks; i++) {
+-                      mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
+-                      if (IS_ERR(mcbsp->clks[i])) {
+-                              dev_err(&pdev->dev,
+-                                      "Invalid %s configuration for McBSP%d.\n",
+-                                      pdata->clk_names[i], mcbsp->id);
+-                              ret = PTR_ERR(mcbsp->clks[i]);
+-                              goto err_clk;
+-                      }
+-              }
+-
++      if (pdata->clk_name)
++              mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
++      if (IS_ERR(mcbsp->clk)) {
++              dev_err(&pdev->dev,
++                      "Invalid clock configuration for McBSP%d.\n",
++                      mcbsp->id);
++              ret = PTR_ERR(mcbsp->clk);
++              goto err_clk;
+       }
+       mcbsp->pdata = pdata;
+@@ -948,9 +932,6 @@
+       return 0;
+ err_clk:
+-      while (i--)
+-              clk_put(mcbsp->clks[i]);
+-      kfree(mcbsp->clks);
+       iounmap(mcbsp->io_base);
+ err_ioremap:
+       mcbsp->free = 0;
+@@ -961,7 +942,6 @@
+ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
+ {
+       struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+-      int i;
+       platform_set_drvdata(pdev, NULL);
+       if (mcbsp) {
+@@ -970,18 +950,12 @@
+                               mcbsp->pdata->ops->free)
+                       mcbsp->pdata->ops->free(mcbsp->id);
+-              for (i = mcbsp->num_clks - 1; i >= 0; i--) {
+-                      clk_disable(mcbsp->clks[i]);
+-                      clk_put(mcbsp->clks[i]);
+-              }
++              clk_disable(mcbsp->clk);
++              clk_put(mcbsp->clk);
+               iounmap(mcbsp->io_base);
+-              if (mcbsp->num_clks) {
+-                      kfree(mcbsp->clks);
+-                      mcbsp->clks = NULL;
+-                      mcbsp->num_clks = 0;
+-              }
++              mcbsp->clk = NULL;
+               mcbsp->free = 0;
+               mcbsp->dev = NULL;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-orion/gpio.c linux-2.6.29-rc3.owrt/arch/arm/plat-orion/gpio.c
+--- linux-2.6.29.owrt/arch/arm/plat-orion/gpio.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-orion/gpio.c   2009-05-10 23:48:28.000000000 +0200
+@@ -265,36 +265,51 @@
+  *        polarity    LEVEL          mask
+  *
+  ****************************************************************************/
++static void gpio_irq_edge_ack(u32 irq)
++{
++      int pin = irq_to_gpio(irq);
++
++      writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
++}
+-static void gpio_irq_ack(u32 irq)
++static void gpio_irq_edge_mask(u32 irq)
+ {
+-      int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+-      if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+-              int pin = irq_to_gpio(irq);
+-              writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+-      }
++      int pin = irq_to_gpio(irq);
++      u32 u;
++
++      u = readl(GPIO_EDGE_MASK(pin));
++      u &= ~(1 << (pin & 31));
++      writel(u, GPIO_EDGE_MASK(pin));
++}
++
++static void gpio_irq_edge_unmask(u32 irq)
++{
++      int pin = irq_to_gpio(irq);
++      u32 u;
++
++      u = readl(GPIO_EDGE_MASK(pin));
++      u |= 1 << (pin & 31);
++      writel(u, GPIO_EDGE_MASK(pin));
+ }
+-static void gpio_irq_mask(u32 irq)
++static void gpio_irq_level_mask(u32 irq)
+ {
+       int pin = irq_to_gpio(irq);
+-      int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+-      u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+-              GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+-      u32 u = readl(reg);
++      u32 u;
++
++      u = readl(GPIO_LEVEL_MASK(pin));
+       u &= ~(1 << (pin & 31));
+-      writel(u, reg);
++      writel(u, GPIO_LEVEL_MASK(pin));
+ }
+-static void gpio_irq_unmask(u32 irq)
++static void gpio_irq_level_unmask(u32 irq)
+ {
+       int pin = irq_to_gpio(irq);
+-      int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+-      u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+-              GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+-      u32 u = readl(reg);
++      u32 u;
++
++      u = readl(GPIO_LEVEL_MASK(pin));
+       u |= 1 << (pin & 31);
+-      writel(u, reg);
++      writel(u, GPIO_LEVEL_MASK(pin));
+ }
+ static int gpio_irq_set_type(u32 irq, u32 type)
+@@ -316,9 +331,9 @@
+        * Set edge/level type.
+        */
+       if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+-              desc->handle_irq = handle_edge_irq;
++              desc->chip = &orion_gpio_irq_edge_chip;
+       } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+-              desc->handle_irq = handle_level_irq;
++              desc->chip = &orion_gpio_irq_level_chip;
+       } else {
+               printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
+               return -EINVAL;
+@@ -356,11 +371,19 @@
+       return 0;
+ }
+-struct irq_chip orion_gpio_irq_chip = {
+-      .name           = "orion_gpio",
+-      .ack            = gpio_irq_ack,
+-      .mask           = gpio_irq_mask,
+-      .unmask         = gpio_irq_unmask,
++struct irq_chip orion_gpio_irq_edge_chip = {
++      .name           = "orion_gpio_irq_edge",
++      .ack            = gpio_irq_edge_ack,
++      .mask           = gpio_irq_edge_mask,
++      .unmask         = gpio_irq_edge_unmask,
++      .set_type       = gpio_irq_set_type,
++};
++
++struct irq_chip orion_gpio_irq_level_chip = {
++      .name           = "orion_gpio_irq_level",
++      .mask           = gpio_irq_level_mask,
++      .mask_ack       = gpio_irq_level_mask,
++      .unmask         = gpio_irq_level_unmask,
+       .set_type       = gpio_irq_set_type,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-orion/include/plat/gpio.h linux-2.6.29-rc3.owrt/arch/arm/plat-orion/include/plat/gpio.h
+--- linux-2.6.29.owrt/arch/arm/plat-orion/include/plat/gpio.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-orion/include/plat/gpio.h      2009-05-10 23:48:28.000000000 +0200
+@@ -31,7 +31,8 @@
+ /*
+  * GPIO interrupt handling.
+  */
+-extern struct irq_chip orion_gpio_irq_chip;
++extern struct irq_chip orion_gpio_irq_edge_chip;
++extern struct irq_chip orion_gpio_irq_level_chip;
+ void orion_gpio_irq_handler(int irqoff);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/clock.c linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/clock.c
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/clock.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/clock.c        2009-05-10 23:48:28.000000000 +0200
+@@ -248,7 +248,7 @@
+       &clk_48m,
+ };
+-void __init s3c64xx_register_clocks(void)
++void s3c64xx_register_clocks(void)
+ {
+       struct clk *clkp;
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/gpiolib.c linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/gpiolib.c
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/gpiolib.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/gpiolib.c      2009-05-10 23:48:28.000000000 +0200
+@@ -417,4 +417,4 @@
+       return 0;
+ }
+-core_initcall(s3c64xx_gpiolib_init);
++arch_initcall(s3c64xx_gpiolib_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h    2009-05-10 23:48:28.000000000 +0200
+@@ -117,7 +117,7 @@
+ #define IRQ_ONENAND1          S3C64XX_IRQ_VIC1(12)
+ #define IRQ_NFC                       S3C64XX_IRQ_VIC1(13)
+ #define IRQ_CFCON             S3C64XX_IRQ_VIC1(14)
+-#define IRQ_USBH              S3C64XX_IRQ_VIC1(15)
++#define IRQ_UHOST             S3C64XX_IRQ_VIC1(15)
+ #define IRQ_SPI0              S3C64XX_IRQ_VIC1(16)
+ #define IRQ_SPI1              S3C64XX_IRQ_VIC1(17)
+ #define IRQ_IIC                       S3C64XX_IRQ_VIC1(18)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/irq.c linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq.c
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/irq.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq.c  2009-05-10 23:48:28.000000000 +0200
+@@ -207,7 +207,7 @@
+ static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
+ {
+-      void __iomem *reg_base = uirq->regs;
++      void *reg_base = uirq->regs;
+       unsigned int irq;
+       int offs;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/irq-eint.c linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-eint.c
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/irq-eint.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-eint.c     2009-05-10 23:48:28.000000000 +0200
+@@ -14,15 +14,12 @@
+ #include <linux/kernel.h>
+ #include <linux/interrupt.h>
+-#include <linux/gpio.h>
+ #include <linux/irq.h>
+ #include <linux/io.h>
+ #include <asm/hardware/vic.h>
+ #include <plat/regs-irqtype.h>
+-#include <plat/regs-gpio.h>
+-#include <plat/gpio-cfg.h>
+ #include <mach/map.h>
+ #include <plat/cpu.h>
+@@ -58,7 +55,7 @@
+       u32 mask;
+       mask = __raw_readl(S3C64XX_EINT0MASK);
+-      mask &= ~eint_irq_to_bit(irq);
++      mask |= eint_irq_to_bit(irq);
+       __raw_writel(mask, S3C64XX_EINT0MASK);
+ }
+@@ -77,7 +74,6 @@
+ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+ {
+       int offs = eint_offset(irq);
+-      int pin;
+       int shift;
+       u32 ctrl, mask;
+       u32 newvalue = 0;
+@@ -129,15 +125,6 @@
+       ctrl |= newvalue << shift;
+       __raw_writel(ctrl, reg);
+-      /* set the GPIO pin appropriately */
+-
+-      if (offs < 23)
+-              pin = S3C64XX_GPN(offs);
+-      else
+-              pin = S3C64XX_GPM(offs - 23);
+-
+-      s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+-
+       return 0;
+ }
+@@ -194,7 +181,7 @@
+       s3c_irq_demux_eint(20, 27);
+ }
+-static int __init s3c64xx_init_irq_eint(void)
++int __init s3c64xx_init_irq_eint(void)
+ {
+       int irq;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c
+--- linux-2.6.29.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c        2009-05-10 23:48:28.000000000 +0200
+@@ -36,7 +36,7 @@
+  * ext_xtal_mux for want of an actual name from the manual.
+ */
+-static struct clk clk_ext_xtal_mux = {
++struct clk clk_ext_xtal_mux = {
+       .name           = "ext_xtal",
+       .id             = -1,
+ };
+@@ -63,7 +63,7 @@
+       void __iomem            *reg_divider;
+ };
+-static struct clk clk_fout_apll = {
++struct clk clk_fout_apll = {
+       .name           = "fout_apll",
+       .id             = -1,
+ };
+@@ -78,7 +78,7 @@
+       .nr_sources     = ARRAY_SIZE(clk_src_apll_list),
+ };
+-static struct clksrc_clk clk_mout_apll = {
++struct clksrc_clk clk_mout_apll = {
+       .clk    = {
+               .name           = "mout_apll",
+               .id             = -1,
+@@ -88,7 +88,7 @@
+       .sources        = &clk_src_apll,
+ };
+-static struct clk clk_fout_epll = {
++struct clk clk_fout_epll = {
+       .name           = "fout_epll",
+       .id             = -1,
+ };
+@@ -103,7 +103,7 @@
+       .nr_sources     = ARRAY_SIZE(clk_src_epll_list),
+ };
+-static struct clksrc_clk clk_mout_epll = {
++struct clksrc_clk clk_mout_epll = {
+       .clk    = {
+               .name           = "mout_epll",
+               .id             = -1,
+@@ -123,7 +123,7 @@
+       .nr_sources     = ARRAY_SIZE(clk_src_mpll_list),
+ };
+-static struct clksrc_clk clk_mout_mpll = {
++struct clksrc_clk clk_mout_mpll = {
+       .clk = {
+               .name           = "mout_mpll",
+               .id             = -1,
+@@ -145,7 +145,7 @@
+       return rate;
+ }
+-static struct clk clk_dout_mpll = {
++struct clk clk_dout_mpll = {
+       .name           = "dout_mpll",
+       .id             = -1,
+       .parent         = &clk_mout_mpll.clk,
+@@ -189,10 +189,10 @@
+ };
+ static struct clk *clkset_uhost_list[] = {
+-      &clk_48m,
+       &clk_mout_epll.clk,
+       &clk_dout_mpll,
+       &clk_fin_epll,
++      &clk_48m,
+ };
+ static struct clk_sources clkset_uhost = {
+@@ -239,12 +239,10 @@
+       rate = clk_round_rate(clk, rate);
+       div = clk_get_rate(clk->parent) / rate;
+-      if (div > 16)
+-              return -EINVAL;
+       val = __raw_readl(reg);
+-      val &= ~(0xf << sclk->shift);
+-      val |= (div - 1) << sclk->shift;
++      val &= ~sclk->mask;
++      val |= (rate - 1) << sclk->shift;
+       __raw_writel(val, reg);
+       return 0;
+@@ -353,7 +351,7 @@
+ static struct clksrc_clk clk_usbhost = {
+       .clk    = {
+-              .name           = "usb-bus-host",
++              .name           = "usb-host-bus",
+               .id             = -1,
+               .ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+               .enable         = s3c64xx_sclk_ctrl,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/arm/tools/mach-types linux-2.6.29-rc3.owrt/arch/arm/tools/mach-types
+--- linux-2.6.29.owrt/arch/arm/tools/mach-types        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/arm/tools/mach-types    2009-05-10 23:48:28.000000000 +0200
+@@ -12,7 +12,7 @@
+ #
+ #   http://www.arm.linux.org.uk/developer/machines/?action=new
+ #
+-# Last update: Thu Mar 12 18:01:45 2009
++# Last update: Sun Nov 30 16:39:36 2008
+ #
+ # machine_is_xxx      CONFIG_xxxx             MACH_TYPE_xxx           number
+ #
+@@ -1811,7 +1811,7 @@
+ jade                  MACH_JADE               JADE                    1821
+ ks8695_softplc                MACH_KS8695_SOFTPLC     KS8695_SOFTPLC          1822
+ gprisc3                       MACH_GPRISC3            GPRISC3                 1823
+-stamp9g20             MACH_STAMP9G20          STAMP9G20               1824
++stamp9260             MACH_STAMP9260          STAMP9260               1824
+ smdk6430              MACH_SMDK6430           SMDK6430                1825
+ smdkc100              MACH_SMDKC100           SMDKC100                1826
+ tavorevb              MACH_TAVOREVB           TAVOREVB                1827
+@@ -1993,134 +1993,4 @@
+ benzina                       MACH_BENZINA            BENZINA                 2003
+ blaze                 MACH_BLAZE              BLAZE                   2004
+ linkstation_ls_hgl    MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL      2005
+-htckovsky             MACH_HTCVENUS           HTCVENUS                2006
+-sony_prs505           MACH_SONY_PRS505        SONY_PRS505             2007
+-hanlin_v3             MACH_HANLIN_V3          HANLIN_V3               2008
+-sapphira              MACH_SAPPHIRA           SAPPHIRA                2009
+-dack_sda_01           MACH_DACK_SDA_01        DACK_SDA_01             2010
+-armbox                        MACH_ARMBOX             ARMBOX                  2011
+-harris_rvp            MACH_HARRIS_RVP         HARRIS_RVP              2012
+-ribaldo                       MACH_RIBALDO            RIBALDO                 2013
+-agora                 MACH_AGORA              AGORA                   2014
+-omap3_mini            MACH_OMAP3_MINI         OMAP3_MINI              2015
+-a9sam6432_b           MACH_A9SAM6432_B        A9SAM6432_B             2016
+-usg2410                       MACH_USG2410            USG2410                 2017
+-pc72052_i10_revb      MACH_PC72052_I10_REVB   PC72052_I10_REVB        2018
+-mx35_exm32            MACH_MX35_EXM32         MX35_EXM32              2019
+-topas910              MACH_TOPAS910           TOPAS910                2020
+-hyena                 MACH_HYENA              HYENA                   2021
+-pospax                        MACH_POSPAX             POSPAX                  2022
+-hdl_gx                        MACH_HDL_GX             HDL_GX                  2023
+-ctera_4bay            MACH_CTERA_4BAY         CTERA_4BAY              2024
+-ctera_plug_c          MACH_CTERA_PLUG_C       CTERA_PLUG_C            2025
+-crwea_plug_i          MACH_CRWEA_PLUG_I       CRWEA_PLUG_I            2026
+-egauge2                       MACH_EGAUGE2            EGAUGE2                 2027
+-didj                  MACH_DIDJ               DIDJ                    2028
+-m_s3c2443             MACH_MEISTER            MEISTER                 2029
+-htcblackstone         MACH_HTCBLACKSTONE      HTCBLACKSTONE           2030
+-cpuat9g20             MACH_CPUAT9G20          CPUAT9G20               2031
+-smdk6440              MACH_SMDK6440           SMDK6440                2032
+-omap_35xx_mvp         MACH_OMAP_35XX_MVP      OMAP_35XX_MVP           2033
+-ctera_plug_i          MACH_CTERA_PLUG_I       CTERA_PLUG_I            2034
+-pvg610_100            MACH_PVG610             PVG610                  2035
+-hprw6815              MACH_HPRW6815           HPRW6815                2036
+-omap3_oswald          MACH_OMAP3_OSWALD       OMAP3_OSWALD            2037
+-nas4220b              MACH_NAS4220B           NAS4220B                2038
+-htcraphael_cdma               MACH_HTCRAPHAEL_CDMA    HTCRAPHAEL_CDMA         2039
+-htcdiamond_cdma               MACH_HTCDIAMOND_CDMA    HTCDIAMOND_CDMA         2040
+-scaler                        MACH_SCALER             SCALER                  2041
+-zylonite2             MACH_ZYLONITE2          ZYLONITE2               2042
+-aspenite              MACH_ASPENITE           ASPENITE                2043
+-teton                 MACH_TETON              TETON                   2044
+-ttc_dkb                       MACH_TTC_DKB            TTC_DKB                 2045
+-bishop2                       MACH_BISHOP2            BISHOP2                 2046
+-ippv5                 MACH_IPPV5              IPPV5                   2047
+-farm926                       MACH_FARM926            FARM926                 2048
+-mmccpu                        MACH_MMCCPU             MMCCPU                  2049
+-sgmsfl                        MACH_SGMSFL             SGMSFL                  2050
+-tt8000                        MACH_TT8000             TT8000                  2051
+-zrn4300lp             MACH_ZRN4300LP          ZRN4300LP               2052
+-mptc                  MACH_MPTC               MPTC                    2053
+-h6051                 MACH_H6051              H6051                   2054
+-pvg610_101            MACH_PVG610_101         PVG610_101              2055
+-stamp9261_pc_evb      MACH_STAMP9261_PC_EVB   STAMP9261_PC_EVB        2056
+-pelco_odysseus                MACH_PELCO_ODYSSEUS     PELCO_ODYSSEUS          2057
+-tny_a9260             MACH_TNY_A9260          TNY_A9260               2058
+-tny_a9g20             MACH_TNY_A9G20          TNY_A9G20               2059
+-aesop_mp2530f         MACH_AESOP_MP2530F      AESOP_MP2530F           2060
+-dx900                 MACH_DX900              DX900                   2061
+-cpodc2                        MACH_CPODC2             CPODC2                  2062
+-tilt_8925             MACH_TILT_8925          TILT_8925               2063
+-davinci_dm357_evm     MACH_DAVINCI_DM357_EVM  DAVINCI_DM357_EVM       2064
+-swordfish             MACH_SWORDFISH          SWORDFISH               2065
+-corvus                        MACH_CORVUS             CORVUS                  2066
+-taurus                        MACH_TAURUS             TAURUS                  2067
+-axm                   MACH_AXM                AXM                     2068
+-axc                   MACH_AXC                AXC                     2069
+-baby                  MACH_BABY               BABY                    2070
+-mp200                 MACH_MP200              MP200                   2071
+-pcm043                        MACH_PCM043             PCM043                  2072
+-hanlin_v3c            MACH_HANLIN_V3C         HANLIN_V3C              2073
+-kbk9g20                       MACH_KBK9G20            KBK9G20                 2074
+-adsturbog5            MACH_ADSTURBOG5         ADSTURBOG5              2075
+-avenger_lite1         MACH_AVENGER_LITE1      AVENGER_LITE1           2076
+-suc82x                        MACH_SUC                SUC                     2077
+-at91sam7s256          MACH_AT91SAM7S256       AT91SAM7S256            2078
+-mendoza                       MACH_MENDOZA            MENDOZA                 2079
+-kira                  MACH_KIRA               KIRA                    2080
+-mx1hbm                        MACH_MX1HBM             MX1HBM                  2081
+-quatro43xx            MACH_QUATRO43XX         QUATRO43XX              2082
+-quatro4230            MACH_QUATRO4230         QUATRO4230              2083
+-nsb400                        MACH_NSB400             NSB400                  2084
+-drp255                        MACH_DRP255             DRP255                  2085
+-thoth                 MACH_THOTH              THOTH                   2086
+-firestone             MACH_FIRESTONE          FIRESTONE               2087
+-asusp750              MACH_ASUSP750           ASUSP750                2088
+-ctera_dl              MACH_CTERA_DL           CTERA_DL                2089
+-socr                  MACH_SOCR               SOCR                    2090
+-htcoxygen             MACH_HTCOXYGEN          HTCOXYGEN               2091
+-heroc                 MACH_HEROC              HEROC                   2092
+-zeno6800              MACH_ZENO6800           ZENO6800                2093
+-sc2mcs                        MACH_SC2MCS             SC2MCS                  2094
+-gene100                       MACH_GENE100            GENE100                 2095
+-as353x                        MACH_AS353X             AS353X                  2096
+-sheevaplug            MACH_SHEEVAPLUG         SHEEVAPLUG              2097
+-at91sam9g20           MACH_AT91SAM9G20        AT91SAM9G20             2098
+-mv88f6192gtw_fe               MACH_MV88F6192GTW_FE    MV88F6192GTW_FE         2099
+-cc9200                        MACH_CC9200             CC9200                  2100
+-sm9200                        MACH_SM9200             SM9200                  2101
+-tp9200                        MACH_TP9200             TP9200                  2102
+-snapperdv             MACH_SNAPPERDV          SNAPPERDV               2103
+-avengers_lite         MACH_AVENGERS_LITE      AVENGERS_LITE           2104
+-avengers_lite1                MACH_AVENGERS_LITE1     AVENGERS_LITE1          2105
+-omap3axon             MACH_OMAP3AXON          OMAP3AXON               2106
+-ma8xx                 MACH_MA8XX              MA8XX                   2107
+-mp201ek                       MACH_MP201EK            MP201EK                 2108
+-davinci_tux           MACH_DAVINCI_TUX        DAVINCI_TUX             2109
+-mpa1600                       MACH_MPA1600            MPA1600                 2110
+-pelco_troy            MACH_PELCO_TROY         PELCO_TROY              2111
+-nsb667                        MACH_NSB667             NSB667                  2112
+-rovers5_4mpix         MACH_ROVERS5_4MPIX      ROVERS5_4MPIX           2113
+-twocom                        MACH_TWOCOM             TWOCOM                  2114
+-ubisys_p9_rcu3r2      MACH_UBISYS_P9_RCU3R2   UBISYS_P9_RCU3R2        2115
+-hero_espresso         MACH_HERO_ESPRESSO      HERO_ESPRESSO           2116
+-afeusb                        MACH_AFEUSB             AFEUSB                  2117
+-t830                  MACH_T830               T830                    2118
+-spd8020_cc            MACH_SPD8020_CC         SPD8020_CC              2119
+-om_3d7k                       MACH_OM_3D7K            OM_3D7K                 2120
+-picocom2              MACH_PICOCOM2           PICOCOM2                2121
+-uwg4mx27              MACH_UWG4MX27           UWG4MX27                2122
+-uwg4mx31              MACH_UWG4MX31           UWG4MX31                2123
+-cherry                        MACH_CHERRY             CHERRY                  2124
+-mx51_babbage          MACH_MX51_BABBAGE       MX51_BABBAGE            2125
+-s3c2440turkiye                MACH_S3C2440TURKIYE     S3C2440TURKIYE          2126
+-tx37                  MACH_TX37               TX37                    2127
+-sbc2800_9g20          MACH_SBC2800_9G20       SBC2800_9G20            2128
+-benzglb                       MACH_BENZGLB            BENZGLB                 2129
+-benztd                        MACH_BENZTD             BENZTD                  2130
+-cartesio_plus         MACH_CARTESIO_PLUS      CARTESIO_PLUS           2131
+-solrad_g20            MACH_SOLRAD_G20         SOLRAD_G20              2132
+-mx27wallace           MACH_MX27WALLACE        MX27WALLACE             2133
+-fmzwebmodul           MACH_FMZWEBMODUL        FMZWEBMODUL             2134
+-rd78x00_masa          MACH_RD78X00_MASA       RD78X00_MASA            2135
+-smallogger            MACH_SMALLOGGER         SMALLOGGER              2136
++htcvenus              MACH_HTCVENUS           HTCVENUS                2006
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/avr32/mach-at32ap/include/mach/board.h linux-2.6.29-rc3.owrt/arch/avr32/mach-at32ap/include/mach/board.h
+--- linux-2.6.29.owrt/arch/avr32/mach-at32ap/include/mach/board.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/avr32/mach-at32ap/include/mach/board.h  2009-05-10 23:48:28.000000000 +0200
+@@ -116,7 +116,6 @@
+       int     enable_pin;     /* chip enable */
+       int     det_pin;        /* card detect */
+       int     rdy_pin;        /* ready/busy */
+-      u8      rdy_pin_active_low;     /* rdy_pin value is inverted */
+       u8      ale;            /* address line number connected to ALE */
+       u8      cle;            /* address line number connected to CLE */
+       u8      bus_width_16;   /* buswidth is 16 bit */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF518F-EZBRD_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF518F-EZBRD_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF518F-EZBRD_defconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF518F-EZBRD_defconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,6 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.28
+-# Fri Feb 20 10:01:44 2009
++# Linux kernel version: 2.6.28-rc2
+ #
+ # CONFIG_MMU is not set
+ # CONFIG_FPU is not set
+@@ -133,15 +132,10 @@
+ # CONFIG_BF538 is not set
+ # CONFIG_BF539 is not set
+ # CONFIG_BF542 is not set
+-# CONFIG_BF542M is not set
+ # CONFIG_BF544 is not set
+-# CONFIG_BF544M is not set
+ # CONFIG_BF547 is not set
+-# CONFIG_BF547M is not set
+ # CONFIG_BF548 is not set
+-# CONFIG_BF548M is not set
+ # CONFIG_BF549 is not set
+-# CONFIG_BF549M is not set
+ # CONFIG_BF561 is not set
+ CONFIG_BF_REV_MIN=0
+ CONFIG_BF_REV_MAX=2
+@@ -155,7 +149,6 @@
+ # CONFIG_BF_REV_ANY is not set
+ # CONFIG_BF_REV_NONE is not set
+ CONFIG_BF51x=y
+-CONFIG_MEM_MT48LC32M8A2_75=y
+ CONFIG_BFIN518F_EZBRD=y
+ #
+@@ -431,17 +424,7 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-CONFIG_NET_DSA=y
+-# CONFIG_NET_DSA_TAG_DSA is not set
+-# CONFIG_NET_DSA_TAG_EDSA is not set
+-# CONFIG_NET_DSA_TAG_TRAILER is not set
+-CONFIG_NET_DSA_TAG_STPID=y
+-# CONFIG_NET_DSA_MV88E6XXX is not set
+-# CONFIG_NET_DSA_MV88E6060 is not set
+-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+-# CONFIG_NET_DSA_MV88E6131 is not set
+-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+-CONFIG_NET_DSA_KSZ8893M=y
++# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ # CONFIG_LLC2 is not set
+@@ -544,8 +527,6 @@
+ #
+ # Self-contained MTD device drivers
+ #
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -578,9 +559,7 @@
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_C2PORT is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -619,14 +598,10 @@
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
+-CONFIG_BFIN_MAC=y
+-CONFIG_BFIN_TX_DESC_NUM=10
+-CONFIG_BFIN_RX_DESC_NUM=20
+-# CONFIG_BFIN_MAC_RMII is not set
++# CONFIG_BFIN_MAC is not set
+ # CONFIG_SMC91X is not set
+ # CONFIG_SMSC911X is not set
+ # CONFIG_DM9000 is not set
+-# CONFIG_ENC28J60 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+@@ -704,7 +679,7 @@
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+@@ -784,23 +759,7 @@
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+ # CONFIG_I2C_DEBUG_CHIP is not set
+-CONFIG_SPI=y
+-# CONFIG_SPI_DEBUG is not set
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BFIN=y
+-# CONFIG_SPI_BFIN_LOCK is not set
+-# CONFIG_SPI_BITBANG is not set
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_SPI is not set
+ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+ # CONFIG_GPIOLIB is not set
+ # CONFIG_W1 is not set
+@@ -824,10 +783,8 @@
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+ # CONFIG_MFD_TMIO is not set
+-# CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+@@ -899,18 +856,10 @@
+ # CONFIG_RTC_DRV_M41T80 is not set
+ # CONFIG_RTC_DRV_S35390A is not set
+ # CONFIG_RTC_DRV_FM3130 is not set
+-# CONFIG_RTC_DRV_RX8581 is not set
+ #
+ # SPI RTC drivers
+ #
+-# CONFIG_RTC_DRV_M41T94 is not set
+-# CONFIG_RTC_DRV_DS1305 is not set
+-# CONFIG_RTC_DRV_DS1390 is not set
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+-# CONFIG_RTC_DRV_RS5C348 is not set
+-# CONFIG_RTC_DRV_DS3234 is not set
+ #
+ # Platform RTC drivers
+@@ -1108,20 +1057,12 @@
+ # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+ CONFIG_SYSCTL_SYSCALL_CHECK=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_KGDB_TESTCASE is not set
+ CONFIG_DEBUG_VERBOSE=y
+ CONFIG_DEBUG_MMRS=y
+ # CONFIG_DEBUG_HWERR is not set
+@@ -1154,7 +1095,6 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ # CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_MANAGER2 is not set
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF526-EZBRD_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF526-EZBRD_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF526-EZBRD_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF526-EZBRD_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -723,7 +723,7 @@
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF527-EZKIT_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF527-EZKIT_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF527-EZKIT_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF527-EZKIT_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -327,8 +327,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -767,7 +767,7 @@
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF533-EZKIT_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF533-EZKIT_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF533-EZKIT_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF533-EZKIT_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -290,8 +290,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -672,7 +672,7 @@
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF533-STAMP_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF533-STAMP_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF533-STAMP_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF533-STAMP_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -290,8 +290,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -679,7 +679,7 @@
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF537-STAMP_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF537-STAMP_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF537-STAMP_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF537-STAMP_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -298,8 +298,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -568,7 +568,15 @@
+ # CONFIG_MTD_DOC2000 is not set
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
++CONFIG_MTD_NAND=m
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_BFIN is not set
++CONFIG_MTD_NAND_IDS=m
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++CONFIG_MTD_NAND_PLATFORM=m
+ # CONFIG_MTD_ONENAND is not set
+ #
+@@ -714,7 +722,7 @@
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF538-EZKIT_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF538-EZKIT_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF538-EZKIT_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF538-EZKIT_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -306,8 +306,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -726,7 +726,7 @@
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF548-EZKIT_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF548-EZKIT_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF548-EZKIT_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF548-EZKIT_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -361,8 +361,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_BFIN_L2_CACHEABLE is not set
+ # CONFIG_MPU is not set
+@@ -680,7 +680,7 @@
+ CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_SCSI_PROC_FS is not set
++CONFIG_SCSI_PROC_FS=y
+ #
+ # SCSI support type (disk, tape, CD-ROM)
+@@ -856,7 +856,7 @@
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BF561-EZKIT_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF561-EZKIT_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BF561-EZKIT_defconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BF561-EZKIT_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -329,8 +329,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_BFIN_L2_CACHEABLE is not set
+ # CONFIG_MPU is not set
+@@ -709,7 +709,7 @@
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/BlackStamp_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/BlackStamp_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/BlackStamp_defconfig       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/BlackStamp_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -288,8 +288,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/CM-BF527_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/CM-BF527_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/CM-BF527_defconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/CM-BF527_defconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.28
++# Linux kernel version: 2.6.24.7
++# Fri Jul 18 18:00:41 2008
+ #
+ # CONFIG_MMU is not set
+ # CONFIG_FPU is not set
+@@ -8,6 +9,7 @@
+ # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ CONFIG_BLACKFIN=y
+ CONFIG_ZONE_DMA=y
++CONFIG_SEMAPHORE_SLEEPERS=y
+ CONFIG_GENERIC_FIND_NEXT_BIT=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_HARDIRQS=y
+@@ -30,16 +32,18 @@
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+-# CONFIG_GROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++# CONFIG_SYSFS_DEPRECATED is not set
+ # CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+@@ -48,35 +52,26 @@
+ CONFIG_UID16=y
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+ # CONFIG_KALLSYMS_EXTRA_PASS is not set
+ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ # CONFIG_ELF_CORE is not set
+-CONFIG_COMPAT_BRK=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ CONFIG_TINY_SHMEM=y
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+@@ -87,7 +82,6 @@
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+ #
+ # IO Schedulers
+@@ -101,11 +95,9 @@
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
+-CONFIG_CLASSIC_RCU=y
+ # CONFIG_PREEMPT_NONE is not set
+ CONFIG_PREEMPT_VOLUNTARY=y
+ # CONFIG_PREEMPT is not set
+-# CONFIG_FREEZER is not set
+ #
+ # Blackfin Processor Options
+@@ -114,10 +106,6 @@
+ #
+ # Processor and Board Settings
+ #
+-# CONFIG_BF512 is not set
+-# CONFIG_BF514 is not set
+-# CONFIG_BF516 is not set
+-# CONFIG_BF518 is not set
+ # CONFIG_BF522 is not set
+ # CONFIG_BF523 is not set
+ # CONFIG_BF524 is not set
+@@ -130,32 +118,48 @@
+ # CONFIG_BF534 is not set
+ # CONFIG_BF536 is not set
+ # CONFIG_BF537 is not set
+-# CONFIG_BF538 is not set
+-# CONFIG_BF539 is not set
+ # CONFIG_BF542 is not set
+-# CONFIG_BF542M is not set
+ # CONFIG_BF544 is not set
+-# CONFIG_BF544M is not set
+ # CONFIG_BF547 is not set
+-# CONFIG_BF547M is not set
+ # CONFIG_BF548 is not set
+-# CONFIG_BF548M is not set
+ # CONFIG_BF549 is not set
+-# CONFIG_BF549M is not set
+ # CONFIG_BF561 is not set
+-CONFIG_BF_REV_MIN=0
+-CONFIG_BF_REV_MAX=2
+ # CONFIG_BF_REV_0_0 is not set
+ CONFIG_BF_REV_0_1=y
+ # CONFIG_BF_REV_0_2 is not set
+ # CONFIG_BF_REV_0_3 is not set
+ # CONFIG_BF_REV_0_4 is not set
+ # CONFIG_BF_REV_0_5 is not set
+-# CONFIG_BF_REV_0_6 is not set
+ # CONFIG_BF_REV_ANY is not set
+ # CONFIG_BF_REV_NONE is not set
+ CONFIG_BF52x=y
+ CONFIG_MEM_MT48LC16M16A2TG_75=y
++# CONFIG_BFIN527_EZKIT is not set
++CONFIG_BFIN527_BLUETECHNIX_CM=y
++
++#
++# BF527 Specific Configuration
++#
++
++#
++# Alternative Multiplexing Scheme
++#
++# CONFIG_BF527_SPORT0_PORTF is not set
++CONFIG_BF527_SPORT0_PORTG=y
++CONFIG_BF527_SPORT0_TSCLK_PG10=y
++# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
++CONFIG_BF527_UART1_PORTF=y
++# CONFIG_BF527_UART1_PORTG is not set
++# CONFIG_BF527_NAND_D_PORTF is not set
++CONFIG_BF527_NAND_D_PORTH=y
++
++#
++# Interrupt Priority Assignment
++#
++
++#
++# Priority
++#
+ CONFIG_IRQ_PLL_WAKEUP=7
+ CONFIG_IRQ_DMA0_ERROR=7
+ CONFIG_IRQ_DMAR0_BLK=7
+@@ -175,6 +179,7 @@
+ CONFIG_IRQ_SPORT1_RX=9
+ CONFIG_IRQ_SPORT1_TX=9
+ CONFIG_IRQ_TWI=10
++CONFIG_IRQ_SPI=10
+ CONFIG_IRQ_UART0_RX=10
+ CONFIG_IRQ_UART0_TX=10
+ CONFIG_IRQ_UART1_RX=10
+@@ -200,34 +205,6 @@
+ CONFIG_IRQ_WATCH=13
+ CONFIG_IRQ_PORTF_INTA=13
+ CONFIG_IRQ_PORTF_INTB=13
+-# CONFIG_BFIN527_EZKIT is not set
+-CONFIG_BFIN527_BLUETECHNIX_CM=y
+-# CONFIG_BFIN526_EZBRD is not set
+-
+-#
+-# BF527 Specific Configuration
+-#
+-
+-#
+-# Alternative Multiplexing Scheme
+-#
+-# CONFIG_BF527_SPORT0_PORTF is not set
+-CONFIG_BF527_SPORT0_PORTG=y
+-CONFIG_BF527_SPORT0_TSCLK_PG10=y
+-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+-CONFIG_BF527_UART1_PORTF=y
+-# CONFIG_BF527_UART1_PORTG is not set
+-# CONFIG_BF527_NAND_D_PORTF is not set
+-CONFIG_BF527_NAND_D_PORTH=y
+-
+-#
+-# Interrupt Priority Assignment
+-#
+-
+-#
+-# Priority
+-#
+-CONFIG_IRQ_SPI=10
+ CONFIG_IRQ_SPI_ERROR=7
+ CONFIG_IRQ_NFC_ERROR=7
+ CONFIG_IRQ_HDMA_ERROR=7
+@@ -249,6 +226,7 @@
+ #
+ CONFIG_CLKIN_HZ=25000000
+ # CONFIG_BFIN_KERNEL_CLOCK is not set
++CONFIG_MAX_MEM_SIZE=512
+ CONFIG_MAX_VCO_HZ=600000000
+ CONFIG_MIN_VCO_HZ=50000000
+ CONFIG_MAX_SCLK_HZ=133333333
+@@ -262,10 +240,10 @@
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_GENERIC_TIME=y
+ CONFIG_GENERIC_CLOCKEVENTS=y
+ # CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_NO_HZ is not set
+ # CONFIG_HIGH_RES_TIMERS is not set
+ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+@@ -299,12 +277,6 @@
+ CONFIG_CACHELINE_ALIGNED_L1=y
+ # CONFIG_SYSCALL_TAB_L1 is not set
+ # CONFIG_CPLB_SWITCH_TAB_L1 is not set
+-CONFIG_APP_STACK_L1=y
+-
+-#
+-# Speed Optimizations
+-#
+-CONFIG_BFIN_INS_LOWOVERHEAD=y
+ CONFIG_RAMKERNEL=y
+ # CONFIG_ROMKERNEL is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -313,10 +285,10 @@
+ # CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_BFIN_GPTIMERS=y
+@@ -332,8 +304,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ # CONFIG_MPU is not set
+ #
+@@ -362,6 +334,7 @@
+ #
+ # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+ #
++# CONFIG_PCI is not set
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+@@ -372,20 +345,25 @@
+ CONFIG_BINFMT_FLAT=y
+ CONFIG_BINFMT_ZFLAT=y
+ # CONFIG_BINFMT_SHARED_FLAT is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
+ #
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_SUSPEND_UP_POSSIBLE=y
++# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
++# CONFIG_PM_BFIN_SLEEP is not set
+ # CONFIG_PM_WAKEUP_BY_GPIO is not set
+ #
+ # CPU Frequency scaling
+ #
+ # CONFIG_CPU_FREQ is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+@@ -398,7 +376,6 @@
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -428,6 +405,8 @@
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
+ # CONFIG_NETLABEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+@@ -436,7 +415,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ # CONFIG_LLC2 is not set
+@@ -453,14 +431,14 @@
+ #
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+@@ -478,8 +456,6 @@
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+@@ -488,7 +464,6 @@
+ CONFIG_MTD_PARTITIONS=y
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ # CONFIG_MTD_CMDLINE_PARTS is not set
+-# CONFIG_MTD_AR7_PARTS is not set
+ #
+ # User Modules And Translation Layers
+@@ -532,7 +507,6 @@
+ #
+ CONFIG_MTD_COMPLEX_MAPPINGS=y
+ # CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_GPIO_ADDR is not set
+ # CONFIG_MTD_UCLINUX is not set
+ # CONFIG_MTD_PLATRAM is not set
+@@ -568,12 +542,10 @@
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=4096
+-# CONFIG_BLK_DEV_XIP is not set
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ # CONFIG_MISC_DEVICES is not set
+-CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+ #
+@@ -586,6 +558,7 @@
+ # CONFIG_ATA is not set
+ # CONFIG_MD is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+ # CONFIG_MACVLAN is not set
+@@ -606,7 +579,6 @@
+ # CONFIG_SMSC_PHY is not set
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -619,14 +591,11 @@
+ # CONFIG_SMC91X is not set
+ # CONFIG_SMSC911X is not set
+ # CONFIG_DM9000 is not set
+-# CONFIG_ENC28J60 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -635,7 +604,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+ #
+ # USB Network Adapters
+@@ -648,6 +616,7 @@
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -673,15 +642,14 @@
+ # CONFIG_BF5xx_PPIFCD is not set
+ # CONFIG_BFIN_SIMPLE_TIMER is not set
+ # CONFIG_BF5xx_PPI is not set
+-# CONFIG_BF5xx_EPPI is not set
++CONFIG_BFIN_OTP=y
++# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+ # CONFIG_BFIN_SPORT is not set
+ # CONFIG_BFIN_TIMER_LATENCY is not set
+ # CONFIG_TWI_LCD is not set
+-CONFIG_BFIN_DMA_INTERFACE=m
+ CONFIG_SIMPLE_GPIO=m
+ # CONFIG_VT is not set
+ # CONFIG_DEVKMEM is not set
+-# CONFIG_BFIN_JTAG_COMM is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+@@ -705,8 +673,6 @@
+ # CONFIG_SERIAL_BFIN_SPORT is not set
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-CONFIG_BFIN_OTP=y
+-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+ #
+ # CAN, the car bus and industrial fieldbus
+@@ -714,49 +680,44 @@
+ # CONFIG_CAN4LINUX is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
++# CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+ CONFIG_I2C=y
+ CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=m
+-CONFIG_I2C_HELPER_AUTO=y
+ #
+-# I2C Hardware Bus support
++# I2C Algorithms
+ #
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
+ #
+-# I2C system bus drivers (mostly embedded / system-on-chip)
++# I2C Hardware Bus support
+ #
+ CONFIG_I2C_BLACKFIN_TWI=m
+ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+ # CONFIG_I2C_GPIO is not set
+ # CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_SIMTEC is not set
+-
+-#
+-# External I2C/SMBus adapter drivers
+-#
+ # CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
+ # CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_TINY_USB is not set
+-
+-#
+-# Other I2C/SMBus bus drivers
+-#
+-# CONFIG_I2C_PCA_PLATFORM is not set
+ # CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
+ #
+ # Miscellaneous I2C Chip support
+ #
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
+ # CONFIG_DS1682 is not set
+-# CONFIG_AT24 is not set
+ # CONFIG_SENSORS_AD5252 is not set
+-# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
+@@ -765,41 +726,37 @@
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+ # CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
+ CONFIG_SPI=y
+-# CONFIG_SPI_DEBUG is not set
+ CONFIG_SPI_MASTER=y
+ #
+ # SPI Master Controller Drivers
+ #
+ CONFIG_SPI_BFIN=y
+-# CONFIG_SPI_BFIN_LOCK is not set
+ # CONFIG_SPI_BITBANG is not set
+ #
+ # SPI Protocol Masters
+ #
+-# CONFIG_SPI_AT25 is not set
++# CONFIG_EEPROM_AT25 is not set
+ # CONFIG_SPI_SPIDEV is not set
+ # CONFIG_SPI_TLE62X0 is not set
+-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+-# CONFIG_GPIOLIB is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ CONFIG_HWMON=y
+ # CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7414 is not set
+ # CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADCXX is not set
+ # CONFIG_SENSORS_ADM1021 is not set
+ # CONFIG_SENSORS_ADM1025 is not set
+ # CONFIG_SENSORS_ADM1026 is not set
+ # CONFIG_SENSORS_ADM1029 is not set
+ # CONFIG_SENSORS_ADM1031 is not set
+ # CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7462 is not set
+ # CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+ # CONFIG_SENSORS_ATXP1 is not set
+ # CONFIG_SENSORS_DS1621 is not set
+ # CONFIG_SENSORS_F71805F is not set
+@@ -820,7 +777,6 @@
+ # CONFIG_SENSORS_LM90 is not set
+ # CONFIG_SENSORS_LM92 is not set
+ # CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1111 is not set
+ # CONFIG_SENSORS_MAX1619 is not set
+ # CONFIG_SENSORS_MAX6650 is not set
+ # CONFIG_SENSORS_PC87360 is not set
+@@ -829,7 +785,6 @@
+ # CONFIG_SENSORS_SMSC47M1 is not set
+ # CONFIG_SENSORS_SMSC47M192 is not set
+ # CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+ # CONFIG_SENSORS_THMC50 is not set
+ # CONFIG_SENSORS_VT1211 is not set
+ # CONFIG_SENSORS_W83781D is not set
+@@ -837,12 +792,9 @@
+ # CONFIG_SENSORS_W83792D is not set
+ # CONFIG_SENSORS_W83793 is not set
+ # CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+ # CONFIG_SENSORS_W83627HF is not set
+ # CONFIG_SENSORS_W83627EHF is not set
+ # CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+ CONFIG_WATCHDOG=y
+ # CONFIG_WATCHDOG_NOWAYOUT is not set
+@@ -858,31 +810,21 @@
+ # CONFIG_USBPCWATCHDOG is not set
+ #
+-# Multifunction device drivers
++# Sonics Silicon Backplane
+ #
+-# CONFIG_MFD_CORE is not set
+-# CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_PMIC_DA903X is not set
+-# CONFIG_MFD_WM8400 is not set
+-# CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_REGULATOR is not set
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+ #
+-# Multimedia devices
++# Multifunction device drivers
+ #
++# CONFIG_MFD_SM501 is not set
+ #
+-# Multimedia core support
++# Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
+-
+-#
+-# Multimedia drivers
+-#
+ # CONFIG_DAB is not set
+ #
+@@ -897,6 +839,10 @@
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
+ # CONFIG_SOUND is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+@@ -904,7 +850,6 @@
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
+ # CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+ #
+ # Miscellaneous USB options
+@@ -915,48 +860,40 @@
+ # CONFIG_USB_OTG is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ CONFIG_USB_OTG_BLACKLIST_HUB=y
+-CONFIG_USB_MON=y
+-# CONFIG_USB_WUSB is not set
+-# CONFIG_USB_WUSB_CBAF is not set
+ #
+ # USB Host Controller Drivers
+ #
+-# CONFIG_USB_C67X00_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_ISP1760_HCD is not set
+ # CONFIG_USB_ISP1362_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
+ # CONFIG_USB_SL811_HCD is not set
+ # CONFIG_USB_R8A66597_HCD is not set
+-# CONFIG_USB_HWA_HCD is not set
+ CONFIG_USB_MUSB_HDRC=y
+ CONFIG_USB_MUSB_SOC=y
+ #
+-# Blackfin high speed USB Support
++# Blackfin high speed USB support
+ #
+ CONFIG_USB_MUSB_HOST=y
+ # CONFIG_USB_MUSB_PERIPHERAL is not set
+ # CONFIG_USB_MUSB_OTG is not set
+ CONFIG_USB_MUSB_HDRC_HCD=y
+ CONFIG_MUSB_PIO_ONLY=y
+-CONFIG_MUSB_DMA_POLL=y
+-# CONFIG_USB_MUSB_DEBUG is not set
++CONFIG_USB_MUSB_LOGLEVEL=0
+ #
+ # USB Device Class drivers
+ #
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+-# CONFIG_USB_WDM is not set
+-# CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ # CONFIG_USB_LIBUSUAL is not set
+@@ -964,10 +901,15 @@
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
++CONFIG_USB_MON=y
+ #
+ # USB port drivers
+ #
++
++#
++# USB Serial Converter support
++#
+ # CONFIG_USB_SERIAL is not set
+ #
+@@ -976,7 +918,7 @@
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
+ # CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_AUERSWALD is not set
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
+@@ -992,13 +934,17 @@
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
+ # CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_ISIGHTFW is not set
+-# CONFIG_USB_VST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
+ # CONFIG_USB_GADGET is not set
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+ CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+ CONFIG_RTC_HCTOSYS=y
+@@ -1027,59 +973,51 @@
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+ # CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-# CONFIG_RTC_DRV_FM3130 is not set
+-# CONFIG_RTC_DRV_RX8581 is not set
+ #
+ # SPI RTC drivers
+ #
+-# CONFIG_RTC_DRV_M41T94 is not set
+-# CONFIG_RTC_DRV_DS1305 is not set
+-# CONFIG_RTC_DRV_DS1390 is not set
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+ # CONFIG_RTC_DRV_RS5C348 is not set
+-# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+ #
+ # Platform RTC drivers
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+ # CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+ #
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_BFIN=y
+-# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+ #
+ # CONFIG_EXT2_FS is not set
+ # CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4_FS is not set
++# CONFIG_EXT4DEV_FS is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_DNOTIFY is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+ # CONFIG_FUSE_FS is not set
+@@ -1121,11 +1059,8 @@
+ # CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+@@ -1133,12 +1068,13 @@
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
+ # CONFIG_NFSD is not set
+ CONFIG_LOCKD=m
+ CONFIG_LOCKD_V4=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=m
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
++# CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+ CONFIG_SMB_FS=m
+@@ -1194,6 +1130,7 @@
+ # CONFIG_NLS_KOI8_U is not set
+ # CONFIG_NLS_UTF8 is not set
+ # CONFIG_DLM is not set
++# CONFIG_INSTRUMENTATION is not set
+ #
+ # Kernel hacking
+@@ -1201,61 +1138,14 @@
+ # CONFIG_PRINTK_TIME is not set
+ CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=1024
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
+ CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+-# CONFIG_SCHED_DEBUG is not set
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+-# CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_KERNEL is not set
+ # CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-# CONFIG_DEBUG_MEMORY_INIT is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_FRAME_POINTER is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+-CONFIG_HAVE_ARCH_KGDB=y
+-# CONFIG_KGDB is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_KGDB_TESTCASE is not set
+-CONFIG_DEBUG_VERBOSE=y
+ CONFIG_DEBUG_MMRS=y
+-# CONFIG_DEBUG_HWERR is not set
+-# CONFIG_DEBUG_DOUBLEFAULT is not set
+ CONFIG_DEBUG_HUNT_FOR_ZERO=y
+ CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+@@ -1264,7 +1154,7 @@
+ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+ # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+ # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+-# CONFIG_EARLY_PRINTK is not set
++CONFIG_EARLY_PRINTK=y
+ # CONFIG_CPLB_INFO is not set
+ CONFIG_ACCESS_CHECK=y
+@@ -1273,96 +1163,10 @@
+ #
+ # CONFIG_KEYS is not set
+ CONFIG_SECURITY=y
+-# CONFIG_SECURITYFS is not set
+ # CONFIG_SECURITY_NETWORK is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_SECURITY_CAPABILITIES is not set
+ # CONFIG_SECURITY_ROOTPLUG is not set
+-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+-CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_MANAGER2 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-
+-#
+-# Ciphers
+-#
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-
+-#
+-# Compression
+-#
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+-CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO is not set
+ #
+ # Library routines
+@@ -1370,7 +1174,6 @@
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/CM-BF548_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/CM-BF548_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/CM-BF548_defconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/CM-BF548_defconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -336,8 +336,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ CONFIG_L1_MAX_PIECE=16
+ # CONFIG_MPU is not set
+@@ -595,7 +595,7 @@
+ CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_SCSI_PROC_FS is not set
++CONFIG_SCSI_PROC_FS=y
+ #
+ # SCSI support type (disk, tape, CD-ROM)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/IP0X_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/IP0X_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/IP0X_defconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/IP0X_defconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -612,7 +612,7 @@
+ CONFIG_SCSI=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_SCSI_PROC_FS is not set
++CONFIG_SCSI_PROC_FS=y
+ #
+ # SCSI support type (disk, tape, CD-ROM)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/configs/SRV1_defconfig linux-2.6.29-rc3.owrt/arch/blackfin/configs/SRV1_defconfig
+--- linux-2.6.29.owrt/arch/blackfin/configs/SRV1_defconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/configs/SRV1_defconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -282,8 +282,8 @@
+ CONFIG_BFIN_DCACHE=y
+ # CONFIG_BFIN_DCACHE_BANKA is not set
+ # CONFIG_BFIN_ICACHE_LOCK is not set
+-CONFIG_BFIN_WB=y
+-# CONFIG_BFIN_WT is not set
++# CONFIG_BFIN_WB is not set
++CONFIG_BFIN_WT=y
+ CONFIG_L1_MAX_PIECE=16
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/bfin_sport.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/bfin_sport.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/bfin_sport.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/bfin_sport.h       2009-05-10 23:48:28.000000000 +0200
+@@ -1,9 +1,30 @@
+ /*
+- * bfin_sport.h - userspace header for bfin sport driver
++ * File:         include/asm-blackfin/bfin_sport.h
++ * Based on:
++ * Author:       Roy Huang (roy.huang@analog.com)
+  *
+- * Copyright 2004-2008 Analog Devices Inc.
++ * Created:      Thu Aug. 24 2006
++ * Description:
+  *
+- * Licensed under the GPL-2 or later.
++ * Modified:
++ *               Copyright 2004-2006 Analog Devices Inc.
++ *
++ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  */
+ #ifndef __BFIN_SPORT_H__
+@@ -21,10 +42,11 @@
+ #define NORM_FORMAT   0x0
+ #define ALAW_FORMAT   0x2
+ #define ULAW_FORMAT   0x3
++struct sport_register;
+ /* Function driver which use sport must initialize the structure */
+ struct sport_config {
+-      /* TDM (multichannels), I2S or other mode */
++      /*TDM (multichannels), I2S or other mode */
+       unsigned int mode:3;
+       /* if TDM mode is selected, channels must be set */
+@@ -50,18 +72,12 @@
+       int serial_clk;
+       int fsync_clk;
+-      unsigned int data_format:2;     /* Normal, u-law or a-law */
++      unsigned int data_format:2;     /*Normal, u-law or a-law */
+       int word_len;           /* How length of the word in bits, 3-32 bits */
+       int dma_enabled;
+ };
+-/* Userspace interface */
+-#define SPORT_IOC_MAGIC               'P'
+-#define SPORT_IOC_CONFIG      _IOWR('P', 0x01, struct sport_config)
+-
+-#ifdef __KERNEL__
+-
+ struct sport_register {
+       unsigned short tcr1;
+       unsigned short reserved0;
+@@ -101,6 +117,9 @@
+       unsigned long mrcs3;
+ };
++#define SPORT_IOC_MAGIC               'P'
++#define SPORT_IOC_CONFIG      _IOWR('P', 0x01, struct sport_config)
++
+ struct sport_dev {
+       struct cdev cdev;       /* Char device structure */
+@@ -130,8 +149,6 @@
+       struct sport_config config;
+ };
+-#endif
+-
+ #define SPORT_TCR1    0
+ #define       SPORT_TCR2      1
+ #define       SPORT_TCLKDIV   2
+@@ -152,4 +169,4 @@
+ #define SPORT_MRCS2   22
+ #define SPORT_MRCS3   23
+-#endif
++#endif                                /*__BFIN_SPORT_H__*/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/checksum.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/checksum.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/checksum.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/checksum.h 2009-05-10 23:48:28.000000000 +0200
+@@ -63,23 +63,23 @@
+ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+ {
+-      unsigned int carry;
+-      __asm__ ("%0 = %0 + %2;\n\t"
+-              "CC = AC0;\n\t"
+-              "%1 = CC;\n\t"
+-              "%0 = %0 + %1;\n\t"
+-              "%0 = %0 + %3;\n\t"
+-              "CC = AC0;\n\t"
+-              "%1 = CC;\n\t"
+-              "%0 = %0 + %1;\n\t"
+-              "%0 = %0 + %4;\n\t"
+-              "CC = AC0;\n\t"
+-              "%1 = CC;\n\t"
+-              "%0 = %0 + %1;\n\t"
+-              : "=d" (sum), "=&d" (carry)
+-              : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
+-              : "CC");
++      __asm__ ("%0 = %0 + %1;\n\t"
++               "CC = AC0;\n\t"
++               "if !CC jump 4;\n\t"
++               "%0 = %0 + %4;\n\t"
++               "%0 = %0 + %2;\n\t"
++               "CC = AC0;\n\t"
++                 "if !CC jump 4;\n\t"
++                 "%0 = %0 + %4;\n\t"
++               "%0 = %0 + %3;\n\t"
++               "CC = AC0;\n\t"
++                 "if !CC jump 4;\n\t"
++                 "%0 = %0 + %4;\n\t"
++                 "NOP;\n\t"
++               : "=d" (sum)
++               : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
++               : "CC");
+       return (sum);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/delay.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/delay.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/delay.h        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/delay.h    2009-05-10 23:48:28.000000000 +0200
+@@ -13,7 +13,29 @@
+ static inline void __delay(unsigned long loops)
+ {
+-__asm__ __volatile__ (
++      if (ANOMALY_05000312) {
++              /* Interrupted loads to loop registers -> bad */
++              unsigned long tmp;
++              __asm__ __volatile__(
++                      "[--SP] = LC0;"
++                      "[--SP] = LT0;"
++                      "[--SP] = LB0;"
++                      "LSETUP (1f,1f) LC0 = %1;"
++                      "1: NOP;"
++                      /* We take advantage of the fact that LC0 is 0 at
++                       * the end of the loop.  Otherwise we'd need some
++                       * NOPs after the CLI here.
++                       */
++                      "CLI %0;"
++                      "LB0 = [SP++];"
++                      "LT0 = [SP++];"
++                      "LC0 = [SP++];"
++                      "STI %0;"
++                      : "=d" (tmp)
++                      : "a" (loops)
++              );
++      } else
++              __asm__ __volatile__ (
+                       "LSETUP(1f, 1f) LC0 = %0;"
+                       "1: NOP;"
+                       :
+@@ -25,15 +47,16 @@
+ #include <linux/param.h>      /* needed for HZ */
+ /*
+- * close approximation borrowed from m68knommu to avoid 64-bit math
++ * Use only for very small delays ( < 1 msec).  Should probably use a
++ * lookup table, really, as the multiplications take much too long with
++ * short delays.  This is a "reasonable" implementation, though (and the
++ * first constant multiplications gets optimized away if the delay is
++ * a constant)
+  */
+-
+-#define       HZSCALE         (268435456 / (1000000/HZ))
+-
+ static inline void udelay(unsigned long usecs)
+ {
+       extern unsigned long loops_per_jiffy;
+-      __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
++      __delay(usecs * loops_per_jiffy / (1000000 / HZ));
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/gpio.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/gpio.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/gpio.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/gpio.h     2009-05-10 23:48:28.000000000 +0200
+@@ -27,6 +27,60 @@
+  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  */
++/*
++*  Number     BF537/6/4    BF561    BF533/2/1
++*             BF527/5/2
++*
++*  GPIO_0       PF0         PF0        PF0
++*  GPIO_1       PF1         PF1        PF1
++*  GPIO_2       PF2         PF2        PF2
++*  GPIO_3       PF3         PF3        PF3
++*  GPIO_4       PF4         PF4        PF4
++*  GPIO_5       PF5         PF5        PF5
++*  GPIO_6       PF6         PF6        PF6
++*  GPIO_7       PF7         PF7        PF7
++*  GPIO_8       PF8         PF8        PF8
++*  GPIO_9       PF9         PF9        PF9
++*  GPIO_10      PF10        PF10       PF10
++*  GPIO_11      PF11        PF11       PF11
++*  GPIO_12      PF12        PF12       PF12
++*  GPIO_13      PF13        PF13       PF13
++*  GPIO_14      PF14        PF14       PF14
++*  GPIO_15      PF15        PF15       PF15
++*  GPIO_16      PG0         PF16
++*  GPIO_17      PG1         PF17
++*  GPIO_18      PG2         PF18
++*  GPIO_19      PG3         PF19
++*  GPIO_20      PG4         PF20
++*  GPIO_21      PG5         PF21
++*  GPIO_22      PG6         PF22
++*  GPIO_23      PG7         PF23
++*  GPIO_24      PG8         PF24
++*  GPIO_25      PG9         PF25
++*  GPIO_26      PG10        PF26
++*  GPIO_27      PG11        PF27
++*  GPIO_28      PG12        PF28
++*  GPIO_29      PG13        PF29
++*  GPIO_30      PG14        PF30
++*  GPIO_31      PG15        PF31
++*  GPIO_32      PH0         PF32
++*  GPIO_33      PH1         PF33
++*  GPIO_34      PH2         PF34
++*  GPIO_35      PH3         PF35
++*  GPIO_36      PH4         PF36
++*  GPIO_37      PH5         PF37
++*  GPIO_38      PH6         PF38
++*  GPIO_39      PH7         PF39
++*  GPIO_40      PH8         PF40
++*  GPIO_41      PH9         PF41
++*  GPIO_42      PH10        PF42
++*  GPIO_43      PH11        PF43
++*  GPIO_44      PH12        PF44
++*  GPIO_45      PH13        PF45
++*  GPIO_46      PH14        PF46
++*  GPIO_47      PH15        PF47
++*/
++
+ #ifndef __ARCH_BLACKFIN_GPIO_H__
+ #define __ARCH_BLACKFIN_GPIO_H__
+@@ -241,6 +295,10 @@
+ int bfin_gpio_get_value(unsigned gpio);
+ void bfin_gpio_set_value(unsigned gpio, int value);
++#ifndef BF548_FAMILY
++#define bfin_gpio_set_value(gpio, value)    set_gpio_data(gpio, value)
++#endif
++
+ #ifdef CONFIG_GPIOLIB
+ #include <asm-generic/gpio.h>         /* cansleep wrappers */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/ipipe_base.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/ipipe_base.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/ipipe_base.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/ipipe_base.h       2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*   -*- linux-c -*-
+- *   include/asm-blackfin/ipipe_base.h
++ *   include/asm-blackfin/_baseipipe.h
+  *
+  *   Copyright (C) 2007 Philippe Gerum.
+  *
+@@ -27,9 +27,8 @@
+ #define IPIPE_NR_XIRQS                NR_IRQS
+ #define IPIPE_IRQ_ISHIFT      5       /* 2^5 for 32bits arch. */
+-/* Blackfin-specific, per-cpu pipeline status */
+-#define IPIPE_SYNCDEFER_FLAG  15
+-#define IPIPE_SYNCDEFER_MASK  (1L << IPIPE_SYNCDEFER_MASK)
++/* Blackfin-specific, global domain flags */
++#define IPIPE_ROOTLOCK_FLAG   1       /* Lock pipeline for root */
+  /* Blackfin traps -- i.e. exception vector numbers */
+ #define IPIPE_NR_FAULTS               52 /* We leave a gap after VEC_ILL_RES. */
+@@ -49,6 +48,11 @@
+ #ifndef __ASSEMBLY__
++#include <linux/bitops.h>
++
++extern int test_bit(int nr, const void *addr);
++
++
+ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
+ static inline void __ipipe_stall_root(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/ipipe.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/ipipe.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/ipipe.h        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/ipipe.h    2009-05-10 23:48:28.000000000 +0200
+@@ -35,9 +35,9 @@
+ #include <asm/atomic.h>
+ #include <asm/traps.h>
+-#define IPIPE_ARCH_STRING     "1.9-00"
++#define IPIPE_ARCH_STRING     "1.8-00"
+ #define IPIPE_MAJOR_NUMBER    1
+-#define IPIPE_MINOR_NUMBER    9
++#define IPIPE_MINOR_NUMBER    8
+ #define IPIPE_PATCH_NUMBER    0
+ #ifdef CONFIG_SMP
+@@ -83,9 +83,9 @@
+                               "%2 = CYCLES2\n"                \
+                               "CC = %2 == %0\n"               \
+                               "if ! CC jump 1b\n"             \
+-                              : "=d,a" (((unsigned long *)&t)[1]),    \
+-                                "=d,a" (((unsigned long *)&t)[0]),    \
+-                                "=d,a" (__cy2)                                \
++                              : "=r" (((unsigned long *)&t)[1]),      \
++                                "=r" (((unsigned long *)&t)[0]),      \
++                                "=r" (__cy2)                          \
+                               : /*no input*/ : "CC");                 \
+       t;                                                              \
+       })
+@@ -118,40 +118,35 @@
+ #define __ipipe_disable_irq(irq)      (irq_desc[irq].chip->mask(irq))
+-static inline int __ipipe_check_tickdev(const char *devname)
+-{
+-      return 1;
+-}
++#define __ipipe_lock_root()                                   \
++      set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+-static inline void __ipipe_lock_root(void)
+-{
+-      set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+-}
+-
+-static inline void __ipipe_unlock_root(void)
+-{
+-      clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+-}
++#define __ipipe_unlock_root()                                 \
++      clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+ void __ipipe_enable_pipeline(void);
+ #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
+-#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+-void ___ipipe_sync_pipeline(unsigned long syncmask);
++#define __ipipe_sync_pipeline(syncmask)                                       \
++      do {                                                            \
++              struct ipipe_domain *ipd = ipipe_current_domain;        \
++              if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
++                      __ipipe_sync_stage(syncmask);                   \
++      } while (0)
+ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
+ int __ipipe_get_irq_priority(unsigned irq);
++int __ipipe_get_irqthread_priority(unsigned irq);
++
+ void __ipipe_stall_root_raw(void);
+ void __ipipe_unstall_root_raw(void);
+ void __ipipe_serial_debug(const char *fmt, ...);
+-asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+-
+ DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
+ extern unsigned long __ipipe_core_clock;
+@@ -167,25 +162,42 @@
+ #define __ipipe_run_irqtail()  /* Must be a macro */                  \
+       do {                                                            \
++              asmlinkage void __ipipe_call_irqtail(void);             \
+               unsigned long __pending;                                \
+-              CSYNC();                                                \
++              CSYNC();                                        \
+               __pending = bfin_read_IPEND();                          \
+               if (__pending & 0x8000) {                               \
+                       __pending &= ~0x8010;                           \
+                       if (__pending && (__pending & (__pending - 1)) == 0) \
+-                              __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
++                              __ipipe_call_irqtail();                 \
+               }                                                       \
+       } while (0)
+ #define __ipipe_run_isr(ipd, irq)                                     \
+       do {                                                            \
+               if (ipd == ipipe_root_domain) {                         \
+-                      local_irq_enable_hw();                          \
+-                      if (ipipe_virtual_irq_p(irq))                   \
++                      /*                                              \
++                       * Note: the I-pipe implements a threaded interrupt model on \
++                       * this arch for Linux external IRQs. The interrupt handler we \
++                       * call here only wakes up the associated IRQ thread. \
++                       */                                             \
++                      if (ipipe_virtual_irq_p(irq)) {                 \
++                              /* No irqtail here; virtual interrupts have no effect \
++                                 on IPEND so there is no need for processing \
++                                 deferral. */                         \
++                              local_irq_enable_nohead(ipd);           \
+                               ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
+-                      else                                            \
++                              local_irq_disable_nohead(ipd);          \
++                      } else                                          \
++                              /*                                      \
++                               * No need to run the irqtail here either; \
++                               * we can't be preempted by hw IRQs, so \
++                               * non-Linux IRQs cannot stack over the short \
++                               * thread wakeup code. Which in turn means \
++                               * that no irqtail condition could be pending \
++                               * for domains above Linux in the pipeline. \
++                               */                                     \
+                               ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+-                      local_irq_disable_hw();                         \
+               } else {                                                \
+                       __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
+                       local_irq_enable_nohead(ipd);                   \
+@@ -205,24 +217,42 @@
+ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
+-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+-#define IRQ_SYSTMR            IRQ_CORETMR
+-#define IRQ_PRIOTMR           IRQ_CORETMR
+-#else
++#define IS_SYSIRQ(irq)                ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
++#define IS_GPIOIRQ(irq)               ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
++
+ #define IRQ_SYSTMR            IRQ_TIMER0
+ #define IRQ_PRIOTMR           CONFIG_IRQ_TIMER0
+-#endif
+-#ifdef CONFIG_BF561
++#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
++#define PRIO_GPIODEMUX(irq)   CONFIG_PFA
++#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
++#define PRIO_GPIODEMUX(irq)   CONFIG_IRQ_PROG_INTA
++#elif defined(CONFIG_BF52x)
++#define PRIO_GPIODEMUX(irq)   ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
++                               (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
++                               (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
++                               -1)
++#elif defined(CONFIG_BF561)
++#define PRIO_GPIODEMUX(irq)   ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
++                               (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
++                               (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
++                               -1)
+ #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
+ #define bfin_write_TIMER_ENABLE(val)  bfin_write_TMRS8_ENABLE(val)
+ #define bfin_write_TIMER_STATUS(val)  bfin_write_TMRS8_STATUS(val)
+ #define bfin_read_TIMER_STATUS()      bfin_read_TMRS8_STATUS()
+ #elif defined(CONFIG_BF54x)
++#define PRIO_GPIODEMUX(irq)   ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
++                               (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
++                               (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
++                               (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
++                               -1)
+ #define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
+ #define bfin_write_TIMER_ENABLE(val)  bfin_write_TIMER_ENABLE0(val)
+ #define bfin_write_TIMER_STATUS(val)  bfin_write_TIMER_STATUS0(val)
+ #define bfin_read_TIMER_STATUS(val)   bfin_read_TIMER_STATUS0(val)
++#else
++# error "no PRIO_GPIODEMUX() for this part"
+ #endif
+ #define __ipipe_root_tick_p(regs)     ((regs->ipend & 0x10) != 0)
+@@ -245,6 +275,4 @@
+ #endif /* !CONFIG_IPIPE */
+-#define ipipe_update_tick_evtdev(evtdev)      do { } while (0)
+-
+ #endif        /* !__ASM_BLACKFIN_IPIPE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/irq.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/irq.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/irq.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/irq.h      2009-05-10 23:48:28.000000000 +0200
+@@ -61,38 +61,20 @@
+ #define raw_irqs_disabled_flags(flags)        (!irqs_enabled_from_flags_hw(flags))
+ #define local_test_iflag_hw(x)                irqs_enabled_from_flags_hw(x)
+-#define local_save_flags(x)                                    \
+-      do {                                                     \
+-              (x) = __ipipe_test_root() ?                      \
+-                      __all_masked_irq_flags : bfin_irq_flags; \
+-              barrier();                                       \
+-      } while (0)
+-
+-#define local_irq_save(x)                                      \
+-      do {                                                     \
+-              (x) = __ipipe_test_and_stall_root() ?            \
++#define local_save_flags(x)                                           \
++      do {                                                            \
++              (x) = __ipipe_test_root() ? \
+                       __all_masked_irq_flags : bfin_irq_flags; \
+-              barrier();                                       \
+       } while (0)
+-static inline void local_irq_restore(unsigned long x)
+-{
+-      barrier();
+-      __ipipe_restore_root(x == __all_masked_irq_flags);
+-}
+-
+-#define local_irq_disable()                   \
+-      do {                                    \
+-              __ipipe_stall_root();           \
+-              barrier();                      \
++#define local_irq_save(x)                             \
++      do {                                            \
++              (x) = __ipipe_test_and_stall_root();    \
+       } while (0)
+-static inline void local_irq_enable(void)
+-{
+-      barrier();
+-      __ipipe_unstall_root();
+-}
+-
++#define local_irq_restore(x)  __ipipe_restore_root(x)
++#define local_irq_disable()   __ipipe_stall_root()
++#define local_irq_enable()    __ipipe_unstall_root()
+ #define irqs_disabled()               __ipipe_test_root()
+ #define local_save_flags_hw(x) \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/Kbuild linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/Kbuild
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/Kbuild 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/Kbuild     2009-05-10 23:48:28.000000000 +0200
+@@ -1,4 +1,3 @@
+ include include/asm-generic/Kbuild.asm
+-unifdef-y += bfin_sport.h
+ unifdef-y += fixed_code.h
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/kgdb.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/kgdb.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/kgdb.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/kgdb.h     2009-05-10 23:48:28.000000000 +0200
+@@ -1,8 +1,32 @@
+-/* Blackfin KGDB header
++/*
++ * File:         include/asm-blackfin/kgdb.h
++ * Based on:
++ * Author:       Sonic Zhang
++ *
++ * Created:
++ * Description:
++ *
++ * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
++ *
++ * Modified:
++ *               Copyright 2005-2006 Analog Devices Inc.
++ *
++ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright 2005-2009 Analog Devices Inc.
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
+  *
+- * Licensed under the GPL-2 or later.
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  */
+ #ifndef __ASM_BLACKFIN_KGDB_H__
+@@ -13,18 +37,17 @@
+ /* gdb locks */
+ #define KGDB_MAX_NO_CPUS 8
+-/*
+- * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+- * At least NUMREGBYTES*2 are needed for register packets.
+- * Longer buffer is needed to list all threads.
+- */
++/************************************************************************/
++/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
++/* at least NUMREGBYTES*2 are needed for register packets */
++/* Longer buffer is needed to list all threads */
+ #define BUFMAX 2048
+ /*
+- * Note that this register image is different from
+- * the register image that Linux produces at interrupt time.
+- *
+- * Linux's register image is defined by struct pt_regs in ptrace.h.
++ *  Note that this register image is different from
++ *  the register image that Linux produces at interrupt time.
++ *  
++ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+  */
+ enum regnames {
+   /* Core Registers */
+@@ -81,14 +104,14 @@
+   BFIN_RETX,
+   BFIN_RETN,
+   BFIN_RETE,
+-
++  
+   /* Pseudo Registers */
+   BFIN_PC,
+   BFIN_CC,
+   BFIN_EXTRA1,                /* Address of .text section.  */
+   BFIN_EXTRA2,                /* Address of .data section.  */
+   BFIN_EXTRA3,                /* Address of .bss section.  */
+-  BFIN_FDPIC_EXEC,
++  BFIN_FDPIC_EXEC, 
+   BFIN_FDPIC_INTERP,
+   /* MMRs */
+@@ -103,7 +126,7 @@
+ static inline void arch_kgdb_breakpoint(void)
+ {
+-      asm("EXCPT 2;");
++      asm("   EXCPT 2;");
+ }
+ #define BREAK_INSTR_SIZE      2
+ #define CACHE_FLUSH_IS_SAFE   1
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/mem_init.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/mem_init.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/mem_init.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/mem_init.h 2009-05-10 23:48:28.000000000 +0200
+@@ -115,7 +115,7 @@
+ #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+ /* Enable SCLK Out */
+-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
++#define mem_SDGCTL        (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+ #else
+ #define mem_SDRRC     CONFIG_MEM_SDRRC
+ #define mem_SDGCTL    CONFIG_MEM_SDGCTL
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/pda.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/pda.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/pda.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/pda.h      2009-05-10 23:48:28.000000000 +0200
+@@ -59,7 +59,6 @@
+       unsigned long icplb_fault_addr;
+       unsigned long retx;
+       unsigned long seqstat;
+-      unsigned int __nmi_count;       /* number of times NMI asserted on this CPU */
+ };
+ extern struct blackfin_pda cpu_pda[];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/reboot.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/reboot.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/reboot.h       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/reboot.h   2009-05-10 23:48:28.000000000 +0200
+@@ -15,6 +15,6 @@
+ extern void native_machine_power_off(void);
+ /* common reboot workarounds */
+-extern void bfin_reset_boot_spi_cs(unsigned short pin);
++extern void bfin_gpio_reset_spi0_ssel1(void);
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/include/asm/thread_info.h linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/thread_info.h
+--- linux-2.6.29.owrt/arch/blackfin/include/asm/thread_info.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/include/asm/thread_info.h      2009-05-10 23:48:28.000000000 +0200
+@@ -122,7 +122,6 @@
+ #define TIF_MEMDIE              4
+ #define TIF_RESTORE_SIGMASK   5       /* restore signal mask in do_signal() */
+ #define TIF_FREEZE              6       /* is freezing for suspend */
+-#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
+ /* as above, but as bit values */
+ #define _TIF_SYSCALL_TRACE    (1<<TIF_SYSCALL_TRACE)
+@@ -131,7 +130,6 @@
+ #define _TIF_POLLING_NRFLAG   (1<<TIF_POLLING_NRFLAG)
+ #define _TIF_RESTORE_SIGMASK  (1<<TIF_RESTORE_SIGMASK)
+ #define _TIF_FREEZE             (1<<TIF_FREEZE)
+-#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
+ #define _TIF_WORK_MASK                0x0000FFFE      /* work to do on interrupt/exception return */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/Kconfig linux-2.6.29-rc3.owrt/arch/blackfin/Kconfig
+--- linux-2.6.29.owrt/arch/blackfin/Kconfig    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/Kconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -169,51 +169,26 @@
+       help
+         BF542 Processor Support.
+-config BF542M
+-      bool "BF542m"
+-      help
+-        BF542 Processor Support.
+-
+ config BF544
+       bool "BF544"
+       help
+         BF544 Processor Support.
+-config BF544M
+-      bool "BF544m"
+-      help
+-        BF544 Processor Support.
+-
+ config BF547
+       bool "BF547"
+       help
+         BF547 Processor Support.
+-config BF547M
+-      bool "BF547m"
+-      help
+-        BF547 Processor Support.
+-
+ config BF548
+       bool "BF548"
+       help
+         BF548 Processor Support.
+-config BF548M
+-      bool "BF548m"
+-      help
+-        BF548 Processor Support.
+-
+ config BF549
+       bool "BF549"
+       help
+         BF549 Processor Support.
+-config BF549M
+-      bool "BF549m"
+-      help
+-        BF549 Processor Support.
+-
+ config BF561
+       bool "BF561"
+       help
+@@ -249,39 +224,39 @@
+ config BF_REV_MIN
+       int
+-      default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
++      default 0 if (BF51x || BF52x || BF54x)
+       default 2 if (BF537 || BF536 || BF534)
+-      default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
++      default 3 if (BF561 ||BF533 || BF532 || BF531)
+       default 4 if (BF538 || BF539)
+ config BF_REV_MAX
+       int
+-      default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+-      default 3 if (BF537 || BF536 || BF534 || BF54xM)
++      default 2 if (BF51x || BF52x || BF54x)
++      default 3 if (BF537 || BF536 || BF534)
+       default 5 if (BF561 || BF538 || BF539)
+       default 6 if (BF533 || BF532 || BF531)
+ choice
+       prompt "Silicon Rev"
+-      default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
++      default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+       default BF_REV_0_2 if (BF534 || BF536 || BF537)
+-      default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
++      default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+ config BF_REV_0_0
+       bool "0.0"
+-      depends on (BF51x || BF52x || (BF54x && !BF54xM))
++      depends on (BF51x || BF52x || BF54x)
+ config BF_REV_0_1
+       bool "0.1"
+-      depends on (BF52x || (BF54x && !BF54xM))
++      depends on (BF52x || BF54x)
+ config BF_REV_0_2
+       bool "0.2"
+-      depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
++      depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+ config BF_REV_0_3
+       bool "0.3"
+-      depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
++      depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+ config BF_REV_0_4
+       bool "0.4"
+@@ -318,14 +293,9 @@
+       depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
+       default y
+-config BF54xM
+-      bool
+-      depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+-      default y
+-
+ config BF54x
+       bool
+-      depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
++      depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+       default y
+ config MEM_GENERIC_BOARD
+@@ -1129,7 +1099,6 @@
+ config PM_WAKEUP_BY_GPIO
+       bool "Allow Wakeup from Standby by GPIO"
+-      depends on PM && !BF54x
+ config PM_WAKEUP_GPIO_NUMBER
+       int "GPIO number"
+@@ -1169,12 +1138,6 @@
+       default n
+       help
+         Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+-        (all processors, except ADSP-BF549). This option sets
+-        the general-purpose wake-up enable (GPWE) control bit to enable
+-        wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+-        On ADSP-BF549 this option enables the the same functionality on the
+-        /MRXON pin also PH7.
+-
+ endmenu
+ menu "CPU Frequency scaling"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/Kconfig.debug linux-2.6.29-rc3.owrt/arch/blackfin/Kconfig.debug
+--- linux-2.6.29.owrt/arch/blackfin/Kconfig.debug      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/Kconfig.debug  2009-05-10 23:48:28.000000000 +0200
+@@ -21,6 +21,12 @@
+ config HAVE_ARCH_KGDB
+       def_bool y
++config KGDB_TESTCASE
++      tristate "KGDB: for test case in expect"
++      default n
++      help
++        This is a kgdb test case for automated testing.
++
+ config DEBUG_VERBOSE
+       bool "Verbose fault messages"
+       default y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/bfin_dma_5xx.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/bfin_dma_5xx.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/bfin_dma_5xx.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/bfin_dma_5xx.c  2009-05-10 23:48:28.000000000 +0200
+@@ -249,13 +249,6 @@
+       spin_lock_irqsave(&mdma_lock, flags);
+-      /* Force a sync in case a previous config reset on this channel
+-       * occurred.  This is needed so subsequent writes to DMA registers
+-       * are not spuriously lost/corrupted.  Do it under irq lock and
+-       * without the anomaly version (because we are atomic already).
+-       */
+-      __builtin_bfin_ssync();
+-
+       if (bfin_read_MDMA_S0_CONFIG())
+               while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
+                       continue;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/bfin_gpio.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/bfin_gpio.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/bfin_gpio.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/bfin_gpio.c     2009-05-10 23:48:28.000000000 +0200
+@@ -27,6 +27,59 @@
+  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  */
++/*
++*  Number     BF537/6/4    BF561    BF533/2/1    BF549/8/4/2
++*
++*  GPIO_0       PF0         PF0        PF0       PA0...PJ13
++*  GPIO_1       PF1         PF1        PF1
++*  GPIO_2       PF2         PF2        PF2
++*  GPIO_3       PF3         PF3        PF3
++*  GPIO_4       PF4         PF4        PF4
++*  GPIO_5       PF5         PF5        PF5
++*  GPIO_6       PF6         PF6        PF6
++*  GPIO_7       PF7         PF7        PF7
++*  GPIO_8       PF8         PF8        PF8
++*  GPIO_9       PF9         PF9        PF9
++*  GPIO_10      PF10        PF10       PF10
++*  GPIO_11      PF11        PF11       PF11
++*  GPIO_12      PF12        PF12       PF12
++*  GPIO_13      PF13        PF13       PF13
++*  GPIO_14      PF14        PF14       PF14
++*  GPIO_15      PF15        PF15       PF15
++*  GPIO_16      PG0         PF16
++*  GPIO_17      PG1         PF17
++*  GPIO_18      PG2         PF18
++*  GPIO_19      PG3         PF19
++*  GPIO_20      PG4         PF20
++*  GPIO_21      PG5         PF21
++*  GPIO_22      PG6         PF22
++*  GPIO_23      PG7         PF23
++*  GPIO_24      PG8         PF24
++*  GPIO_25      PG9         PF25
++*  GPIO_26      PG10        PF26
++*  GPIO_27      PG11        PF27
++*  GPIO_28      PG12        PF28
++*  GPIO_29      PG13        PF29
++*  GPIO_30      PG14        PF30
++*  GPIO_31      PG15        PF31
++*  GPIO_32      PH0         PF32
++*  GPIO_33      PH1         PF33
++*  GPIO_34      PH2         PF34
++*  GPIO_35      PH3         PF35
++*  GPIO_36      PH4         PF36
++*  GPIO_37      PH5         PF37
++*  GPIO_38      PH6         PF38
++*  GPIO_39      PH7         PF39
++*  GPIO_40      PH8         PF40
++*  GPIO_41      PH9         PF41
++*  GPIO_42      PH10        PF42
++*  GPIO_43      PH11        PF43
++*  GPIO_44      PH12        PF44
++*  GPIO_45      PH13        PF45
++*  GPIO_46      PH14        PF46
++*  GPIO_47      PH15        PF47
++*/
++
+ #include <linux/delay.h>
+ #include <linux/module.h>
+ #include <linux/err.h>
+@@ -66,61 +119,62 @@
+ #define AWA_DUMMY_READ(...)  do { } while (0)
+ #endif
+-static struct gpio_port_t * const gpio_array[] = {
+ #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
++static struct gpio_port_t *gpio_bankb[] = {
+       (struct gpio_port_t *) FIO_FLAG_D,
+-#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
++};
++#endif
++
++#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
++static struct gpio_port_t *gpio_bankb[] = {
+       (struct gpio_port_t *) PORTFIO,
+       (struct gpio_port_t *) PORTGIO,
+       (struct gpio_port_t *) PORTHIO,
+-#elif defined(BF561_FAMILY)
+-      (struct gpio_port_t *) FIO0_FLAG_D,
+-      (struct gpio_port_t *) FIO1_FLAG_D,
+-      (struct gpio_port_t *) FIO2_FLAG_D,
+-#elif defined(BF548_FAMILY)
+-      (struct gpio_port_t *)PORTA_FER,
+-      (struct gpio_port_t *)PORTB_FER,
+-      (struct gpio_port_t *)PORTC_FER,
+-      (struct gpio_port_t *)PORTD_FER,
+-      (struct gpio_port_t *)PORTE_FER,
+-      (struct gpio_port_t *)PORTF_FER,
+-      (struct gpio_port_t *)PORTG_FER,
+-      (struct gpio_port_t *)PORTH_FER,
+-      (struct gpio_port_t *)PORTI_FER,
+-      (struct gpio_port_t *)PORTJ_FER,
+-#else
+-# error no gpio arrays defined
+-#endif
+ };
+-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+-static unsigned short * const port_fer[] = {
++static unsigned short *port_fer[] = {
+       (unsigned short *) PORTF_FER,
+       (unsigned short *) PORTG_FER,
+       (unsigned short *) PORTH_FER,
+ };
++#endif
+-# if !defined(BF537_FAMILY)
+-static unsigned short * const port_mux[] = {
++#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
++static unsigned short *port_mux[] = {
+       (unsigned short *) PORTF_MUX,
+       (unsigned short *) PORTG_MUX,
+       (unsigned short *) PORTH_MUX,
+ };
+ static const
+-u8 pmux_offset[][16] = {
+-#  if defined(BF527_FAMILY)
+-      { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+-      { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+-      { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+-#  elif defined(BF518_FAMILY)
+-      { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+-      { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+-      { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+-#  endif
++u8 pmux_offset[][16] =
++      {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
++       { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
++       { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
++      };
++#endif
++
++#ifdef BF561_FAMILY
++static struct gpio_port_t *gpio_bankb[] = {
++      (struct gpio_port_t *) FIO0_FLAG_D,
++      (struct gpio_port_t *) FIO1_FLAG_D,
++      (struct gpio_port_t *) FIO2_FLAG_D,
+ };
+-# endif
++#endif
++#ifdef BF548_FAMILY
++static struct gpio_port_t *gpio_array[] = {
++      (struct gpio_port_t *)PORTA_FER,
++      (struct gpio_port_t *)PORTB_FER,
++      (struct gpio_port_t *)PORTC_FER,
++      (struct gpio_port_t *)PORTD_FER,
++      (struct gpio_port_t *)PORTE_FER,
++      (struct gpio_port_t *)PORTF_FER,
++      (struct gpio_port_t *)PORTG_FER,
++      (struct gpio_port_t *)PORTH_FER,
++      (struct gpio_port_t *)PORTI_FER,
++      (struct gpio_port_t *)PORTJ_FER,
++};
+ #endif
+ static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
+@@ -134,9 +188,35 @@
+ } str_ident[MAX_RESOURCES];
+ #if defined(CONFIG_PM)
++#if defined(CONFIG_BF54x)
++static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
++#else
++static unsigned short wakeup_map[GPIO_BANK_NUM];
++static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+ static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
++
++#ifdef BF533_FAMILY
++static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB};
++#endif
++
++#ifdef BF537_FAMILY
++static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
++#endif
++
++#ifdef BF538_FAMILY
++static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB};
+ #endif
++#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
++static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
++#endif
++
++#ifdef BF561_FAMILY
++static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
++#endif
++#endif
++#endif /* CONFIG_PM */
++
+ inline int check_gpio(unsigned gpio)
+ {
+ #if defined(BF548_FAMILY)
+@@ -250,10 +330,9 @@
+       {.res = P_SPI0_SSEL3, .offset = 0},
+ };
+-static void portmux_setup(unsigned short per)
++static void portmux_setup(unsigned short per, unsigned short function)
+ {
+       u16 y, offset, muxreg;
+-      u16 function = P_FUNCT2MUX(per);
+       for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
+               if (port_mux_lut[y].res == per) {
+@@ -274,33 +353,30 @@
+       }
+ }
+ #elif defined(BF548_FAMILY)
+-inline void portmux_setup(unsigned short per)
++inline void portmux_setup(unsigned short portno, unsigned short function)
+ {
+       u32 pmux;
+-      u16 ident = P_IDENT(per);
+-      u16 function = P_FUNCT2MUX(per);
+-      pmux = gpio_array[gpio_bank(ident)]->port_mux;
++      pmux = gpio_array[gpio_bank(portno)]->port_mux;
+-      pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+-      pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
++      pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
++      pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+-      gpio_array[gpio_bank(ident)]->port_mux = pmux;
++      gpio_array[gpio_bank(portno)]->port_mux = pmux;
+ }
+-inline u16 get_portmux(unsigned short per)
++inline u16 get_portmux(unsigned short portno)
+ {
+       u32 pmux;
+-      u16 ident = P_IDENT(per);
+-      pmux = gpio_array[gpio_bank(ident)]->port_mux;
++      pmux = gpio_array[gpio_bank(portno)]->port_mux;
+-      return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
++      return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+ }
+ #elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+-inline void portmux_setup(unsigned short per)
++inline void portmux_setup(unsigned short portno, unsigned short function)
+ {
+-      u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
++      u16 pmux, ident = P_IDENT(portno);
+       u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+       pmux = *port_mux[gpio_bank(ident)];
+@@ -348,71 +424,90 @@
+       unsigned long flags; \
+       local_irq_save_hw(flags); \
+       if (arg) \
+-              gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
++              gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+       else \
+-              gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
++              gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+       AWA_DUMMY_READ(name); \
+       local_irq_restore_hw(flags); \
+ } \
+ EXPORT_SYMBOL(set_gpio_ ## name);
+-SET_GPIO(dir)   /* set_gpio_dir() */
+-SET_GPIO(inen)  /* set_gpio_inen() */
+-SET_GPIO(polar) /* set_gpio_polar() */
+-SET_GPIO(edge)  /* set_gpio_edge() */
+-SET_GPIO(both)  /* set_gpio_both() */
++SET_GPIO(dir)
++SET_GPIO(inen)
++SET_GPIO(polar)
++SET_GPIO(edge)
++SET_GPIO(both)
++#if ANOMALY_05000311 || ANOMALY_05000323
+ #define SET_GPIO_SC(name) \
+ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
+ { \
+       unsigned long flags; \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) \
+-              local_irq_save_hw(flags); \
++      local_irq_save_hw(flags); \
+       if (arg) \
+-              gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
++              gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+       else \
+-              gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) { \
+-              AWA_DUMMY_READ(name); \
+-              local_irq_restore_hw(flags); \
+-      } \
++              gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
++      AWA_DUMMY_READ(name); \
++      local_irq_restore_hw(flags); \
+ } \
+ EXPORT_SYMBOL(set_gpio_ ## name);
++#else
++#define SET_GPIO_SC(name) \
++void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
++{ \
++      if (arg) \
++              gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
++      else \
++              gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
++} \
++EXPORT_SYMBOL(set_gpio_ ## name);
++#endif
+ SET_GPIO_SC(maska)
+ SET_GPIO_SC(maskb)
+ SET_GPIO_SC(data)
++#if ANOMALY_05000311 || ANOMALY_05000323
+ void set_gpio_toggle(unsigned gpio)
+ {
+       unsigned long flags;
+-      if (ANOMALY_05000311 || ANOMALY_05000323)
+-              local_irq_save_hw(flags);
+-      gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+-      if (ANOMALY_05000311 || ANOMALY_05000323) {
+-              AWA_DUMMY_READ(toggle);
+-              local_irq_restore_hw(flags);
+-      }
++      local_irq_save_hw(flags);
++      gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
++      AWA_DUMMY_READ(toggle);
++      local_irq_restore_hw(flags);
++}
++#else
++void set_gpio_toggle(unsigned gpio)
++{
++      gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+ }
++#endif
+ EXPORT_SYMBOL(set_gpio_toggle);
+ /*Set current PORT date (16-bit word)*/
++#if ANOMALY_05000311 || ANOMALY_05000323
+ #define SET_GPIO_P(name) \
+ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
+ { \
+       unsigned long flags; \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) \
+-              local_irq_save_hw(flags); \
+-      gpio_array[gpio_bank(gpio)]->name = arg; \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) { \
+-              AWA_DUMMY_READ(name); \
+-              local_irq_restore_hw(flags); \
+-      } \
++      local_irq_save_hw(flags); \
++      gpio_bankb[gpio_bank(gpio)]->name = arg; \
++      AWA_DUMMY_READ(name); \
++      local_irq_restore_hw(flags); \
++} \
++EXPORT_SYMBOL(set_gpiop_ ## name);
++#else
++#define SET_GPIO_P(name) \
++void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
++{ \
++      gpio_bankb[gpio_bank(gpio)]->name = arg; \
+ } \
+ EXPORT_SYMBOL(set_gpiop_ ## name);
++#endif
+ SET_GPIO_P(data)
+ SET_GPIO_P(dir)
+@@ -424,21 +519,27 @@
+ SET_GPIO_P(maskb)
+ /* Get a specific bit */
++#if ANOMALY_05000311 || ANOMALY_05000323
+ #define GET_GPIO(name) \
+ unsigned short get_gpio_ ## name(unsigned gpio) \
+ { \
+       unsigned long flags; \
+       unsigned short ret; \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) \
+-              local_irq_save_hw(flags); \
+-      ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) { \
+-              AWA_DUMMY_READ(name); \
+-              local_irq_restore_hw(flags); \
+-      } \
++      local_irq_save_hw(flags); \
++      ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
++      AWA_DUMMY_READ(name); \
++      local_irq_restore_hw(flags); \
+       return ret; \
+ } \
+ EXPORT_SYMBOL(get_gpio_ ## name);
++#else
++#define GET_GPIO(name) \
++unsigned short get_gpio_ ## name(unsigned gpio) \
++{ \
++      return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
++} \
++EXPORT_SYMBOL(get_gpio_ ## name);
++#endif
+ GET_GPIO(data)
+ GET_GPIO(dir)
+@@ -451,21 +552,27 @@
+ /*Get current PORT date (16-bit word)*/
++#if ANOMALY_05000311 || ANOMALY_05000323
+ #define GET_GPIO_P(name) \
+ unsigned short get_gpiop_ ## name(unsigned gpio) \
+ { \
+       unsigned long flags; \
+       unsigned short ret; \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) \
+-              local_irq_save_hw(flags); \
+-      ret = (gpio_array[gpio_bank(gpio)]->name); \
+-      if (ANOMALY_05000311 || ANOMALY_05000323) { \
+-              AWA_DUMMY_READ(name); \
+-              local_irq_restore_hw(flags); \
+-      } \
++      local_irq_save_hw(flags); \
++      ret = (gpio_bankb[gpio_bank(gpio)]->name); \
++      AWA_DUMMY_READ(name); \
++      local_irq_restore_hw(flags); \
+       return ret; \
+ } \
+ EXPORT_SYMBOL(get_gpiop_ ## name);
++#else
++#define GET_GPIO_P(name) \
++unsigned short get_gpiop_ ## name(unsigned gpio) \
++{ \
++      return (gpio_bankb[gpio_bank(gpio)]->name);\
++} \
++EXPORT_SYMBOL(get_gpiop_ ## name);
++#endif
+ GET_GPIO_P(data)
+ GET_GPIO_P(dir)
+@@ -478,26 +585,6 @@
+ #ifdef CONFIG_PM
+-
+-static unsigned short wakeup_map[GPIO_BANK_NUM];
+-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+-
+-static const unsigned int sic_iwr_irqs[] = {
+-#if defined(BF533_FAMILY)
+-      IRQ_PROG_INTB
+-#elif defined(BF537_FAMILY)
+-      IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
+-#elif defined(BF538_FAMILY)
+-      IRQ_PORTF_INTB
+-#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+-      IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
+-#elif defined(BF561_FAMILY)
+-      IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
+-#else
+-# error no SIC_IWR defined
+-#endif
+-};
+-
+ /***********************************************************
+ *
+ * FUNCTIONS: Blackfin PM Setup API
+@@ -582,18 +669,18 @@
+               mask = wakeup_map[gpio_bank(i)];
+               bank = gpio_bank(i);
+-              gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
+-              gpio_array[bank]->maskb = 0;
++              gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
++              gpio_bankb[bank]->maskb = 0;
+               if (mask) {
+ #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+                       gpio_bank_saved[bank].fer   = *port_fer[bank];
+ #endif
+-                      gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+-                      gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+-                      gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+-                      gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+-                      gpio_bank_saved[bank].both  = gpio_array[bank]->both;
++                      gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
++                      gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
++                      gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
++                      gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
++                      gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+                       gpio_bank_saved[bank].reserved =
+                                               reserved_gpio_map[bank];
+@@ -613,7 +700,7 @@
+                       }
+                       bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
+-                      gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
++                      gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+               }
+       }
+@@ -634,18 +721,18 @@
+ #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+                       *port_fer[bank]         = gpio_bank_saved[bank].fer;
+ #endif
+-                      gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+-                      gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+-                      gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+-                      gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+-                      gpio_array[bank]->both  = gpio_bank_saved[bank].both;
++                      gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
++                      gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
++                      gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
++                      gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
++                      gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+                       reserved_gpio_map[bank] =
+                                       gpio_bank_saved[bank].reserved;
+                       bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
+               }
+-              gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
++              gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+       }
+       AWA_DUMMY_READ(maskb);
+ }
+@@ -658,21 +745,21 @@
+               bank = gpio_bank(i);
+ #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+-              gpio_bank_saved[bank].fer = *port_fer[bank];
++                      gpio_bank_saved[bank].fer   = *port_fer[bank];
+ #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+-              gpio_bank_saved[bank].mux = *port_mux[bank];
++                      gpio_bank_saved[bank].mux   = *port_mux[bank];
+ #else
+-              if (bank == 0)
+-                      gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
++                      if (bank == 0)
++                              gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+ #endif
+ #endif
+-              gpio_bank_saved[bank].data  = gpio_array[bank]->data;
+-              gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+-              gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+-              gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+-              gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+-              gpio_bank_saved[bank].both  = gpio_array[bank]->both;
+-              gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
++                      gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
++                      gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
++                      gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
++                      gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
++                      gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
++                      gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
++                      gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+       }
+       AWA_DUMMY_READ(maska);
+@@ -683,27 +770,27 @@
+       int i, bank;
+       for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+-              bank = gpio_bank(i);
++                      bank = gpio_bank(i);
+ #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+ #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+-              *port_mux[bank] = gpio_bank_saved[bank].mux;
++                      *port_mux[bank] = gpio_bank_saved[bank].mux;
+ #else
+-              if (bank == 0)
+-                      bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
++                      if (bank == 0)
++                              bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+ #endif
+-              *port_fer[bank] = gpio_bank_saved[bank].fer;
++                      *port_fer[bank]         = gpio_bank_saved[bank].fer;
+ #endif
+-              gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+-              gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+-              gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+-              gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+-              gpio_array[bank]->both  = gpio_bank_saved[bank].both;
++                      gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
++                      gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
++                      gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
++                      gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
++                      gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+-              gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+-                                              | gpio_bank_saved[bank].dir;
++                      gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
++                                                      | gpio_bank_saved[bank].dir;
+-              gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
++                      gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+       }
+       AWA_DUMMY_READ(maska);
+ }
+@@ -730,12 +817,12 @@
+       for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+               bank = gpio_bank(i);
+-              gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
+-              gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
+-              gpio_bank_saved[bank].data = gpio_array[bank]->data;
+-              gpio_bank_saved[bank].data = gpio_array[bank]->data;
+-              gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+-              gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
++                      gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
++                      gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
++                      gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
++                      gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
++                      gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
++                      gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+       }
+ }
+@@ -744,21 +831,21 @@
+       int i, bank;
+       for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+-              bank = gpio_bank(i);
++                      bank = gpio_bank(i);
+-              gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
+-              gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
+-              gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+-              gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
+-              gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+-                                              | gpio_bank_saved[bank].dir;
++                      gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
++                      gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
++                      gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
++                      gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
++                      gpio_array[bank]->port_set = gpio_bank_saved[bank].data
++                                                      | gpio_bank_saved[bank].dir;
+       }
+ }
+ #endif
+ unsigned short get_gpio_dir(unsigned gpio)
+ {
+-      return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
++      return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
+ }
+ EXPORT_SYMBOL(get_gpio_dir);
+@@ -818,7 +905,9 @@
+                */
+ #ifdef BF548_FAMILY
+-              if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
++              u16 funct = get_portmux(ident);
++
++              if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+ #else
+               if (!(per & P_MAYSHARE)) {
+ #endif
+@@ -842,7 +931,11 @@
+  anyway:
+       reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+-      portmux_setup(per);
++#ifdef BF548_FAMILY
++      portmux_setup(ident, P_FUNCT2MUX(per));
++#else
++      portmux_setup(per, P_FUNCT2MUX(per));
++#endif
+       port_setup(ident, PERIPHERAL_USAGE);
+       local_irq_restore_hw(flags);
+@@ -884,6 +977,9 @@
+       if (!(per & P_DEFINED))
+               return;
++      if (check_gpio(ident) < 0)
++              return;
++
+       local_irq_save_hw(flags);
+       if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
+@@ -960,15 +1056,9 @@
+               local_irq_restore_hw(flags);
+               return -EBUSY;
+       }
+-      if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
++      if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+               printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
+                      " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
+-      }
+-#ifndef BF548_FAMILY
+-      else {  /* Reset POLAR setting when acquiring a gpio for the first time */
+-              set_gpio_polar(gpio, 0);
+-      }
+-#endif
+       reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+       set_label(gpio, label);
+@@ -988,8 +1078,6 @@
+       if (check_gpio(gpio) < 0)
+               return;
+-      might_sleep();
+-
+       local_irq_save_hw(flags);
+       if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+@@ -1070,16 +1158,8 @@
+       local_irq_restore_hw(flags);
+ }
+-static inline void __bfin_gpio_direction_input(unsigned gpio)
+-{
+-#ifdef BF548_FAMILY
+-      gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+-#else
+-      gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+-#endif
+-      gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+-}
++#ifdef BF548_FAMILY
+ int bfin_gpio_direction_input(unsigned gpio)
+ {
+       unsigned long flags;
+@@ -1090,85 +1170,125 @@
+       }
+       local_irq_save_hw(flags);
+-      __bfin_gpio_direction_input(gpio);
+-      AWA_DUMMY_READ(inen);
++      gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
++      gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+       local_irq_restore_hw(flags);
+       return 0;
+ }
+ EXPORT_SYMBOL(bfin_gpio_direction_input);
+-void bfin_gpio_irq_prepare(unsigned gpio)
++int bfin_gpio_direction_output(unsigned gpio, int value)
+ {
+-#ifdef BF548_FAMILY
+       unsigned long flags;
+-#endif
+-      port_setup(gpio, GPIO_USAGE);
++      if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
++              gpio_error(gpio);
++              return -EINVAL;
++      }
+-#ifdef BF548_FAMILY
+       local_irq_save_hw(flags);
+-      __bfin_gpio_direction_input(gpio);
++      gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
++      gpio_set_value(gpio, value);
++      gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+       local_irq_restore_hw(flags);
+-#endif
++
++      return 0;
+ }
++EXPORT_SYMBOL(bfin_gpio_direction_output);
+ void bfin_gpio_set_value(unsigned gpio, int arg)
+ {
+       if (arg)
+-              gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
++              gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+       else
+-              gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
++              gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+ }
+ EXPORT_SYMBOL(bfin_gpio_set_value);
+-int bfin_gpio_direction_output(unsigned gpio, int value)
++int bfin_gpio_get_value(unsigned gpio)
++{
++      return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
++}
++EXPORT_SYMBOL(bfin_gpio_get_value);
++
++void bfin_gpio_irq_prepare(unsigned gpio)
+ {
+       unsigned long flags;
+-      if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+-              gpio_error(gpio);
+-              return -EINVAL;
+-      }
++      port_setup(gpio, GPIO_USAGE);
+       local_irq_save_hw(flags);
+-
+-      gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+-      gpio_set_value(gpio, value);
+-#ifdef BF548_FAMILY
+-      gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
+-#else
+-      gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+-#endif
+-
+-      AWA_DUMMY_READ(dir);
++      gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
++      gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+       local_irq_restore_hw(flags);
+-
+-      return 0;
+ }
+-EXPORT_SYMBOL(bfin_gpio_direction_output);
++
++#else
+ int bfin_gpio_get_value(unsigned gpio)
+ {
+-#ifdef BF548_FAMILY
+-      return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
+-#else
+       unsigned long flags;
++      int ret;
+       if (unlikely(get_gpio_edge(gpio))) {
+-              int ret;
+               local_irq_save_hw(flags);
+               set_gpio_edge(gpio, 0);
+               ret = get_gpio_data(gpio);
+               set_gpio_edge(gpio, 1);
+               local_irq_restore_hw(flags);
++
+               return ret;
+       } else
+               return get_gpio_data(gpio);
+-#endif
+ }
+ EXPORT_SYMBOL(bfin_gpio_get_value);
++
++int bfin_gpio_direction_input(unsigned gpio)
++{
++      unsigned long flags;
++
++      if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
++              gpio_error(gpio);
++              return -EINVAL;
++      }
++
++      local_irq_save_hw(flags);
++      gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
++      gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
++      AWA_DUMMY_READ(inen);
++      local_irq_restore_hw(flags);
++
++      return 0;
++}
++EXPORT_SYMBOL(bfin_gpio_direction_input);
++
++int bfin_gpio_direction_output(unsigned gpio, int value)
++{
++      unsigned long flags;
++
++      if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
++              gpio_error(gpio);
++              return -EINVAL;
++      }
++
++      local_irq_save_hw(flags);
++      gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
++
++      if (value)
++              gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
++      else
++              gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
++
++      gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
++      AWA_DUMMY_READ(dir);
++      local_irq_restore_hw(flags);
++
++      return 0;
++}
++EXPORT_SYMBOL(bfin_gpio_direction_output);
++
+ /* If we are booting from SPI and our board lacks a strong enough pull up,
+  * the core can reset and execute the bootrom faster than the resistor can
+  * pull the signal logically high.  To work around this (common) error in
+@@ -1179,15 +1299,23 @@
+  * lives here as we need to force all the GPIO states w/out going through
+  * BUG() checks and such.
+  */
+-void bfin_reset_boot_spi_cs(unsigned short pin)
++void bfin_gpio_reset_spi0_ssel1(void)
+ {
+-      unsigned short gpio = P_IDENT(pin);
++      u16 gpio = P_IDENT(P_SPI0_SSEL1);
++
+       port_setup(gpio, GPIO_USAGE);
+-      gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
++      gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+       AWA_DUMMY_READ(data_set);
+       udelay(1);
+ }
++void bfin_gpio_irq_prepare(unsigned gpio)
++{
++      port_setup(gpio, GPIO_USAGE);
++}
++
++#endif /*BF548_FAMILY */
++
+ #if defined(CONFIG_PROC_FS)
+ static int gpio_proc_read(char *buf, char **start, off_t offset,
+                         int len, int *unused_i, void *unused_v)
+@@ -1241,7 +1369,11 @@
+ void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+ {
++#ifdef BF548_FAMILY
+       return bfin_gpio_set_value(gpio, value);
++#else
++      return set_gpio_data(gpio, value);
++#endif
+ }
+ int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/cplb-mpu/cplbinit.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/cplb-mpu/cplbinit.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-mpu/cplbinit.c     2009-05-10 23:48:28.000000000 +0200
+@@ -63,8 +63,10 @@
+       dcplb_tbl[cpu][i_d].addr = 0;
+       dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
++#if 0
+       icplb_tbl[cpu][i_i].addr = 0;
+-      icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
++      icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
++#endif
+       /* Cover kernel memory with 4M pages.  */
+       addr = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/cplb-nompu/cplbinit.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/cplb-nompu/cplbinit.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-nompu/cplbinit.c   2009-05-10 23:48:28.000000000 +0200
+@@ -53,13 +53,9 @@
+       i_d = i_i = 0;
+-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+       /* Set up the zero page.  */
+       d_tbl[i_d].addr = 0;
+       d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+-      i_tbl[i_i].addr = 0;
+-      i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+-#endif
+       /* Cover kernel memory with 4M pages.  */
+       addr = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/cplb-nompu/cplbmgr.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/cplb-nompu/cplbmgr.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/cplb-nompu/cplbmgr.c    2009-05-10 23:48:28.000000000 +0200
+@@ -163,14 +163,12 @@
+               nr_icplb_supv_miss[cpu]++;
+       base = 0;
+-      idx = 0;
+-      do {
++      for (idx = 0; idx < icplb_nr_bounds; idx++) {
+               eaddr = icplb_bounds[idx].eaddr;
+               if (addr < eaddr)
+                       break;
+               base = eaddr;
+-      } while (++idx < icplb_nr_bounds);
+-
++      }
+       if (unlikely(idx == icplb_nr_bounds))
+               return CPLB_NO_ADDR_MATCH;
+@@ -210,14 +208,12 @@
+               nr_dcplb_supv_miss[cpu]++;
+       base = 0;
+-      idx = 0;
+-      do {
++      for (idx = 0; idx < dcplb_nr_bounds; idx++) {
+               eaddr = dcplb_bounds[idx].eaddr;
+               if (addr < eaddr)
+                       break;
+               base = eaddr;
+-      } while (++idx < dcplb_nr_bounds);
+-
++      }
+       if (unlikely(idx == dcplb_nr_bounds))
+               return CPLB_NO_ADDR_MATCH;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/ipipe.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/ipipe.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/ipipe.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/ipipe.c 2009-05-10 23:48:28.000000000 +0200
+@@ -35,8 +35,14 @@
+ #include <asm/atomic.h>
+ #include <asm/io.h>
++static int create_irq_threads;
++
+ DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
++static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
++
++static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
++
+ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
+ static void __ipipe_no_irqtail(void);
+@@ -87,7 +93,6 @@
+  */
+ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
+ {
+-      struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+       struct ipipe_domain *this_domain, *next_domain;
+       struct list_head *head, *pos;
+       int m_ack, s = -1;
+@@ -99,6 +104,7 @@
+        * interrupt.
+        */
+       m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
++
+       this_domain = ipipe_current_domain;
+       if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
+@@ -108,28 +114,49 @@
+               next_domain = list_entry(head, struct ipipe_domain, p_link);
+               if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
+                       if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
+-                              next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+-                      if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+-                              s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
++                              next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
++                      if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
++                              s = __test_and_set_bit(IPIPE_STALL_FLAG,
++                                                     &ipipe_root_cpudom_var(status));
+                       __ipipe_dispatch_wired(next_domain, irq);
+-                      goto out;
++                              goto finalize;
++                      return;
+               }
+       }
+       /* Ack the interrupt. */
+       pos = head;
++
+       while (pos != &__ipipe_pipeline) {
+               next_domain = list_entry(pos, struct ipipe_domain, p_link);
++              /*
++               * For each domain handling the incoming IRQ, mark it
++               * as pending in its log.
++               */
+               if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
++                      /*
++                       * Domains that handle this IRQ are polled for
++                       * acknowledging it by decreasing priority
++                       * order. The interrupt must be made pending
++                       * _first_ in the domain's status flags before
++                       * the PIC is unlocked.
++                       */
+                       __ipipe_set_irq_pending(next_domain, irq);
++
+                       if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
+-                              next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
++                              next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+                               m_ack = 1;
+                       }
+               }
++
++              /*
++               * If the domain does not want the IRQ to be passed
++               * down the interrupt pipe, exit the loop now.
++               */
+               if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
+                       break;
++
+               pos = next_domain->p_link.next;
+       }
+@@ -139,24 +166,18 @@
+        * immediately to the current domain if the interrupt has been
+        * marked as 'sticky'. This search does not go beyond the
+        * current domain in the pipeline. We also enforce the
+-       * additional root stage lock (blackfin-specific).
+-       */
+-      if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+-              s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
++       * additional root stage lock (blackfin-specific). */
+-      /*
+-       * If the interrupt preempted the head domain, then do not
+-       * even try to walk the pipeline, unless an interrupt is
+-       * pending for it.
+-       */
+-      if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+-          ipipe_head_cpudom_var(irqpend_himask) == 0)
+-              goto out;
++      if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
++              s = __test_and_set_bit(IPIPE_STALL_FLAG,
++                                     &ipipe_root_cpudom_var(status));
++finalize:
+       __ipipe_walk_pipeline(head);
+-out:
++
+       if (!s)
+-              __clear_bit(IPIPE_STALL_FLAG, &p->status);
++              __clear_bit(IPIPE_STALL_FLAG,
++                          &ipipe_root_cpudom_var(status));
+ }
+ int __ipipe_check_root(void)
+@@ -166,7 +187,7 @@
+ void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
+ {
+-      struct irq_desc *desc = irq_to_desc(irq);
++      struct irq_desc *desc = irq_desc + irq;
+       int prio = desc->ic_prio;
+       desc->depth = 0;
+@@ -178,7 +199,7 @@
+ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
+ {
+-      struct irq_desc *desc = irq_to_desc(irq);
++      struct irq_desc *desc = irq_desc + irq;
+       int prio = desc->ic_prio;
+       if (ipd != &ipipe_root &&
+@@ -215,18 +236,15 @@
+ {
+       unsigned long flags;
+-      /*
+-       * We need to run the IRQ tail hook whenever we don't
++      /* We need to run the IRQ tail hook whenever we don't
+        * propagate a syscall to higher domains, because we know that
+        * important operations might be pending there (e.g. Xenomai
+-       * deferred rescheduling).
+-       */
++       * deferred rescheduling). */
+-      if (regs->orig_p0 < NR_syscalls) {
++      if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+               void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
+               hook();
+-              if ((current->flags & PF_EVNOTIFY) == 0)
+-                      return 0;
++              return 0;
+       }
+       /*
+@@ -294,46 +312,112 @@
+ {
+       unsigned long flags;
+-#ifdef CONFIG_IPIPE_DEBUG
+       if (irq >= IPIPE_NR_IRQS ||
+           (ipipe_virtual_irq_p(irq)
+            && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
+               return -EINVAL;
+-#endif
+       local_irq_save_hw(flags);
++
+       __ipipe_handle_irq(irq, NULL);
++
+       local_irq_restore_hw(flags);
+       return 1;
+ }
+-asmlinkage void __ipipe_sync_root(void)
++/* Move Linux IRQ to threads. */
++
++static int do_irqd(void *__desc)
+ {
+-      unsigned long flags;
++      struct irq_desc *desc = __desc;
++      unsigned irq = desc - irq_desc;
++      int thrprio = desc->thr_prio;
++      int thrmask = 1 << thrprio;
++      int cpu = smp_processor_id();
++      cpumask_t cpumask;
++
++      sigfillset(&current->blocked);
++      current->flags |= PF_NOFREEZE;
++      cpumask = cpumask_of_cpu(cpu);
++      set_cpus_allowed(current, cpumask);
++      ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
++
++      while (!kthread_should_stop()) {
++              local_irq_disable();
++              if (!(desc->status & IRQ_SCHEDULED)) {
++                      set_current_state(TASK_INTERRUPTIBLE);
++resched:
++                      local_irq_enable();
++                      schedule();
++                      local_irq_disable();
++              }
++              __set_current_state(TASK_RUNNING);
++              /*
++               * If higher priority interrupt servers are ready to
++               * run, reschedule immediately. We need this for the
++               * GPIO demux IRQ handler to unmask the interrupt line
++               * _last_, after all GPIO IRQs have run.
++               */
++              if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
++                      goto resched;
++              if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
++                      per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
++              desc->status &= ~IRQ_SCHEDULED;
++              desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
++              local_irq_enable();
++      }
++      __set_current_state(TASK_RUNNING);
++      return 0;
++}
+-      BUG_ON(irqs_disabled());
++static void kick_irqd(unsigned irq, void *cookie)
++{
++      struct irq_desc *desc = irq_desc + irq;
++      int thrprio = desc->thr_prio;
++      int thrmask = 1 << thrprio;
++      int cpu = smp_processor_id();
++
++      if (!(desc->status & IRQ_SCHEDULED)) {
++              desc->status |= IRQ_SCHEDULED;
++              per_cpu(pending_irqthread_mask, cpu) |= thrmask;
++              ++per_cpu(pending_irq_count[thrprio], cpu);
++              wake_up_process(desc->thread);
++      }
++}
+-      local_irq_save_hw(flags);
++int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
++{
++      if (desc->thread || !create_irq_threads)
++              return 0;
+-      clear_thread_flag(TIF_IRQ_SYNC);
++      desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
++      if (desc->thread == NULL) {
++              printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
++              return -ENOMEM;
++      }
+-      if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+-              __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
++      wake_up_process(desc->thread);
+-      local_irq_restore_hw(flags);
++      desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
++      ipipe_root_domain->irqs[irq].handler = &kick_irqd;
++
++      return 0;
+ }
+-void ___ipipe_sync_pipeline(unsigned long syncmask)
++void __init ipipe_init_irq_threads(void)
+ {
+-      struct ipipe_domain *ipd = ipipe_current_domain;
++      unsigned irq;
++      struct irq_desc *desc;
+-      if (ipd == ipipe_root_domain) {
+-              if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+-                      return;
+-      }
++      create_irq_threads = 1;
+-      __ipipe_sync_stage(syncmask);
++      for (irq = 0; irq < NR_IRQS; irq++) {
++              desc = irq_desc + irq;
++              if (desc->action != NULL ||
++                      (desc->status & IRQ_NOREQUEST) != 0)
++                      ipipe_start_irq_thread(irq, desc);
++      }
+ }
+ EXPORT_SYMBOL(show_stack);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/irqchip.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/irqchip.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/irqchip.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/irqchip.c       2009-05-10 23:48:28.000000000 +0200
+@@ -35,7 +35,6 @@
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+ #include <asm/trace.h>
+-#include <asm/pda.h>
+ static atomic_t irq_err_count;
+ static spinlock_t irq_controller_lock;
+@@ -92,13 +91,8 @@
+               seq_putc(p, '\n');
+  skip:
+               spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+-      } else if (i == NR_IRQS) {
+-              seq_printf(p, "NMI: ");
+-              for_each_online_cpu(j)
+-                      seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+-              seq_printf(p, "     CORE  Non Maskable Interrupt\n");
++      } else if (i == NR_IRQS)
+               seq_printf(p, "Err: %10u\n",  atomic_read(&irq_err_count));
+-      }
+       return 0;
+ }
+@@ -144,15 +138,11 @@
+ #endif
+       generic_handle_irq(irq);
+-#ifndef CONFIG_IPIPE
+-      /*
+-       * If we're the only interrupt running (ignoring IRQ15 which
+-       * is for syscalls), lower our priority to IRQ14 so that
+-       * softirqs run at that level.  If there's another,
+-       * lower-level interrupt, irq_exit will defer softirqs to
+-       * that. If the interrupt pipeline is enabled, we are already
+-       * running at IRQ14 priority, so we don't need this code.
+-       */
++#ifndef CONFIG_IPIPE  /* Useless and bugous over the I-pipe: IRQs are threaded. */
++      /* If we're the only interrupt running (ignoring IRQ15 which is for
++         syscalls), lower our priority to IRQ14 so that softirqs run at
++         that level.  If there's another, lower-level interrupt, irq_exit
++         will defer softirqs to that.  */
+       CSYNC();
+       pending = bfin_read_IPEND() & ~0x8000;
+       other_ints = pending & (pending - 1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/kgdb_test.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/kgdb_test.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/kgdb_test.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/kgdb_test.c     2009-05-10 23:48:28.000000000 +0200
+@@ -20,7 +20,6 @@
+ static char cmdline[256];
+ static unsigned long len;
+-#ifndef CONFIG_SMP
+ static int num1 __attribute__((l1_data));
+ void kgdb_l1_test(void) __attribute__((l1_text));
+@@ -33,8 +32,6 @@
+       printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
+       return ;
+ }
+-#endif
+-
+ #if L2_LENGTH
+ static int num2 __attribute__((l2));
+@@ -62,12 +59,10 @@
+ static int test_proc_output(char *buf)
+ {
+       kgdb_test("hello world!", 12, 0x55, 0x10);
+-#ifndef CONFIG_SMP
+       kgdb_l1_test();
+-#endif
+-#if L2_LENGTH
++      #if L2_LENGTH
+       kgdb_l2_test();
+-#endif
++      #endif
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/Makefile linux-2.6.29-rc3.owrt/arch/blackfin/kernel/Makefile
+--- linux-2.6.29.owrt/arch/blackfin/kernel/Makefile    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/Makefile        2009-05-10 23:48:28.000000000 +0200
+@@ -21,9 +21,5 @@
+ obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
+ obj-$(CONFIG_MODULES)                += module.o
+ obj-$(CONFIG_KGDB)                   += kgdb.o
+-obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
++obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+ obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+-
+-# the kgdb test puts code into L2 and without linker
+-# relaxation, we need to force long calls to/from it
+-CFLAGS_kgdb_test.o := -mlong-calls -O0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/ptrace.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/ptrace.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/ptrace.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/ptrace.c        2009-05-10 23:48:28.000000000 +0200
+@@ -45,7 +45,6 @@
+ #include <asm/asm-offsets.h>
+ #include <asm/dma.h>
+ #include <asm/fixed_code.h>
+-#include <asm/cacheflush.h>
+ #include <asm/mem_map.h>
+ #define TEXT_OFFSET 0
+@@ -241,7 +240,7 @@
+                       } else if (addr >= FIXED_CODE_START
+                           && addr + sizeof(tmp) <= FIXED_CODE_END) {
+-                              copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
++                              memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+                               copied = sizeof(tmp);
+                       } else
+@@ -321,7 +320,7 @@
+                       } else if (addr >= FIXED_CODE_START
+                           && addr + sizeof(data) <= FIXED_CODE_END) {
+-                              copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
++                              memcpy((void *)(addr), &data, sizeof(data));
+                               copied = sizeof(data);
+                       } else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/reboot.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/reboot.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/reboot.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/reboot.c        2009-05-10 23:48:28.000000000 +0200
+@@ -20,8 +20,8 @@
+  * reset while the Core B bit (on dual core parts) is cleared by
+  * the core reset.
+  */
+-__attribute__ ((__l1_text__, __noreturn__))
+-static void bfin_reset(void)
++__attribute__((l1_text))
++static void _bfin_reset(void)
+ {
+       /* Wait for completion of "system" events such as cache line
+        * line fills so that we avoid infinite stalls later on as
+@@ -30,11 +30,7 @@
+        */
+       __builtin_bfin_ssync();
+-      /* The bootrom checks to see how it was reset and will
+-       * automatically perform a software reset for us when
+-       * it starts executing after the core reset.
+-       */
+-      if (ANOMALY_05000353 || ANOMALY_05000386) {
++      while (1) {
+               /* Initiate System software reset. */
+               bfin_write_SWRST(0x7);
+@@ -54,11 +50,6 @@
+               /* Clear System software reset */
+               bfin_write_SWRST(0);
+-              /* The BF526 ROM will crash during reset */
+-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+-              bfin_read_SWRST();
+-#endif
+-
+               /* Wait for the SWRST write to complete.  Cannot rely on SSYNC
+                * though as the System state is all reset now.
+                */
+@@ -69,11 +60,22 @@
+                       : "a" (15 * 1)
+                       : "LC1", "LB1", "LT1"
+               );
+-      }
+-      while (1)
+               /* Issue core reset */
+               asm("raise 1");
++      }
++}
++
++static void bfin_reset(void)
++{
++      if (ANOMALY_05000353 || ANOMALY_05000386)
++              _bfin_reset();
++      else
++              /* the bootrom checks to see how it was reset and will
++               * automatically perform a software reset for us when
++               * it starts executing boot
++               */
++              asm("raise 1;");
+ }
+ __attribute__((weak))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/setup.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/setup.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/setup.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/setup.c 2009-05-10 23:48:28.000000000 +0200
+@@ -60,7 +60,7 @@
+ #define BFIN_MEMMAP_MAX               128 /* number of entries in bfin_memmap */
+ #define BFIN_MEMMAP_RAM               1
+ #define BFIN_MEMMAP_RESERVED  2
+-static struct bfin_memmap {
++struct bfin_memmap {
+       int nr_map;
+       struct bfin_memmap_entry {
+               unsigned long long addr; /* start of memory segment */
+@@ -824,15 +824,7 @@
+       flash_probe();
+ #endif
+-      printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
+-
+-      /* Newer parts mirror SWRST bits in SYSCR */
+-#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
+-    defined(CONFIG_BF538) || defined(CONFIG_BF539)
+       _bfin_swrst = bfin_read_SWRST();
+-#else
+-      _bfin_swrst = bfin_read_SYSCR();
+-#endif
+ #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+       bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+@@ -861,7 +853,7 @@
+       else if (_bfin_swrst & RESET_SOFTWARE)
+               printk(KERN_NOTICE "Reset caused by Software reset\n");
+-      printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
++      printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
+       if (bfin_compiled_revid() == 0xffff)
+               printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
+       else if (bfin_compiled_revid() == -1)
+@@ -889,10 +881,6 @@
+                              CPU, bfin_revid());
+       }
+-      /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+-      if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+-              panic("You can't run on this processor due to 05000448\n");
+-
+       printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+       printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
+@@ -1145,12 +1133,12 @@
+               icache_size = 0;
+       seq_printf(m, "cache size\t: %d KB(L1 icache) "
+-              "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
++              "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+               icache_size, dcache_size,
+ #if defined CONFIG_BFIN_WB
+-              "-wb"
++              "wb"
+ #elif defined CONFIG_BFIN_WT
+-              "-wt"
++              "wt"
+ #endif
+               "", 0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/time.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/time.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/time.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/time.c  2009-05-10 23:48:28.000000000 +0200
+@@ -134,10 +134,7 @@
+       write_seqlock(&xtime_lock);
+ #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+-      /*
+-       * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+-       * enabled.
+-       */
++/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+       if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
+ #endif
+               do_timer(1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/kernel/traps.c linux-2.6.29-rc3.owrt/arch/blackfin/kernel/traps.c
+--- linux-2.6.29.owrt/arch/blackfin/kernel/traps.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/kernel/traps.c 2009-05-10 23:48:28.000000000 +0200
+@@ -673,14 +673,6 @@
+                       verbose_printk("RTI");
+               else if (opcode == 0x0012)
+                       verbose_printk("RTX");
+-              else if (opcode == 0x0013)
+-                      verbose_printk("RTN");
+-              else if (opcode == 0x0014)
+-                      verbose_printk("RTE");
+-              else if (opcode == 0x0025)
+-                      verbose_printk("EMUEXCPT");
+-              else if (opcode == 0x0040 && opcode <= 0x0047)
+-                      verbose_printk("STI R%i", opcode & 7);
+               else if (opcode >= 0x0050 && opcode <= 0x0057)
+                       verbose_printk("JUMP (P%i)", opcode & 7);
+               else if (opcode >= 0x0060 && opcode <= 0x0067)
+@@ -689,10 +681,6 @@
+                       verbose_printk("CALL (PC+P%i)", opcode & 7);
+               else if (opcode >= 0x0080 && opcode <= 0x0087)
+                       verbose_printk("JUMP (PC+P%i)", opcode & 7);
+-              else if (opcode >= 0x0090 && opcode <= 0x009F)
+-                      verbose_printk("RAISE 0x%x", opcode & 0xF);
+-              else if (opcode >= 0x00A0 && opcode <= 0x00AF)
+-                      verbose_printk("EXCPT 0x%x", opcode & 0xF);
+               else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+                       verbose_printk("IF !CC JUMP");
+               else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+@@ -832,8 +820,11 @@
+       decode_address(buf, (unsigned int)stack);
+       printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
++      addr = (unsigned int *)((unsigned int)stack & ~0x3F);
++
+       /* First thing is to look for a frame pointer */
+-      for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
++      for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
++              addr < endstack; addr++, i++) {
+               if (*addr & 0x1)
+                       continue;
+               ins_addr = (unsigned short *)*addr;
+@@ -843,8 +834,7 @@
+               if (fp) {
+                       /* Let's check to see if it is a frame pointer */
+-                      while (fp >= (addr - 1) && fp < endstack
+-                             && fp && ((unsigned int) fp & 0x3) == 0)
++                      while (fp >= (addr - 1) && fp < endstack && fp)
+                               fp = (unsigned int *)*fp;
+                       if (fp == 0 || fp == endstack) {
+                               fp = addr - 1;
+@@ -1062,9 +1052,8 @@
+       char buf [150];
+       struct irqaction *action;
+       unsigned int i;
+-      unsigned long flags = 0;
++      unsigned long flags;
+       unsigned int cpu = smp_processor_id();
+-      unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+       verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+       verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
+@@ -1084,22 +1073,17 @@
+       }
+       verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
+               fp->seqstat & SEQSTAT_EXCAUSE);
+-      for (i = 2; i <= 15 ; i++) {
++      for (i = 6; i <= 15 ; i++) {
+               if (fp->ipend & (1 << i)) {
+-                      if (i != 4) {
+-                              decode_address(buf, bfin_read32(EVT0 + 4*i));
+-                              verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+-                      } else
+-                              verbose_printk(KERN_NOTICE "  interrupts disabled\n");
++                      decode_address(buf, bfin_read32(EVT0 + 4*i));
++                      verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+               }
+       }
+       /* if no interrupts are going off, don't print this out */
+       if (fp->ipend & ~0x3F) {
+               for (i = 0; i < (NR_IRQS - 1); i++) {
+-                      if (!in_atomic)
+-                              spin_lock_irqsave(&irq_desc[i].lock, flags);
+-
++                      spin_lock_irqsave(&irq_desc[i].lock, flags);
+                       action = irq_desc[i].action;
+                       if (!action)
+                               goto unlock;
+@@ -1112,8 +1096,7 @@
+                       }
+                       verbose_printk("\n");
+ unlock:
+-                      if (!in_atomic)
+-                              spin_unlock_irqrestore(&irq_desc[i].lock, flags);
++                      spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf518/boards/ezbrd.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/boards/ezbrd.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf518/boards/ezbrd.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/boards/ezbrd.c      2009-05-10 23:48:28.000000000 +0200
+@@ -46,7 +46,6 @@
+ #include <asm/dpmc.h>
+ #include <asm/bfin_sdh.h>
+ #include <linux/spi/ad7877.h>
+-#include <net/dsa.h>
+ /*
+  * Name the Board for the /proc/cpuinfo
+@@ -105,33 +104,10 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+-};
+-
+-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+-static struct dsa_platform_data ksz8893m_switch_data = {
+-      .mii_bus = &bfin_mii_bus.dev,
+-      .netdev = &bfin_mac_device.dev,
+-      .port_names[0]  = NULL,
+-      .port_names[1]  = "eth%d",
+-      .port_names[2]  = "eth%d",
+-      .port_names[3]  = "cpu",
+-};
+-
+-static struct platform_device ksz8893m_switch_device = {
+-      .name           = "dsa",
+-      .id             = 0,
+-      .num_resources  = 0,
+-      .dev.platform_data = &ksz8893m_switch_data,
+ };
+ #endif
+-#endif
+ #if defined(CONFIG_MTD_M25P80) \
+       || defined(CONFIG_MTD_M25P80_MODULE)
+@@ -171,20 +147,9 @@
+ };
+ #endif
+-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-#if defined(CONFIG_NET_DSA_KSZ8893M) \
+-      || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+-/* SPI SWITCH CHIP */
+-static struct bfin5xx_spi_chip spi_switch_info = {
+-      .enable_dma = 0,
+-      .bits_per_word = 8,
+-};
+-#endif
+-#endif
+-
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -261,28 +226,23 @@
+       },
+ #endif
+-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-#if defined(CONFIG_NET_DSA_KSZ8893M) \
+-      || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "ksz8893m",
+-              .max_speed_hz = 5000000,
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 1,
++              .chip_select = 0,
+               .platform_data = NULL,
+-              .controller_data = &spi_switch_info,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+-#endif
+-#endif
+-
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -513,6 +473,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+       {
+@@ -526,6 +487,7 @@
+       },
+ #endif
+ };
++#endif
+ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ static struct platform_device bfin_sport0_uart_device = {
+@@ -622,11 +584,7 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+-      &ksz8893m_switch_device,
+-#endif
+ #endif
+ #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+@@ -674,8 +632,12 @@
+ static int __init ezbrd_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
++
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+       return 0;
+@@ -687,7 +649,7 @@
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+ void bfin_get_ether_addr(char *addr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/anomaly.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,12 +2,12 @@
+  * File: include/asm-blackfin/mach-bf518/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+ /* This file shoule be up to date with:
+- *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
++ *  - ????
+  */
+ #ifndef _MACH_ANOMALY_H_
+@@ -19,8 +19,6 @@
+ #define ANOMALY_05000122 (1)
+ /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+ #define ANOMALY_05000245 (1)
+-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+-#define ANOMALY_05000254 (1)
+ /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+ #define ANOMALY_05000265 (1)
+ /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+@@ -55,12 +53,6 @@
+ #define ANOMALY_05000443 (1)
+ /* Incorrect L1 Instruction Bank B Memory Map Location */
+ #define ANOMALY_05000444 (1)
+-/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+-#define ANOMALY_05000452 (1)
+-/* PWM_TRIPB Signal Not Available on PG10 */
+-#define ANOMALY_05000453 (1)
+-/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+-#define ANOMALY_05000455 (1)
+ /* Anomalies that don't exist on this proc */
+ #define ANOMALY_05000125 (0)
+@@ -73,20 +65,15 @@
+ #define ANOMALY_05000263 (0)
+ #define ANOMALY_05000266 (0)
+ #define ANOMALY_05000273 (0)
+-#define ANOMALY_05000278 (0)
+ #define ANOMALY_05000285 (0)
+-#define ANOMALY_05000305 (0)
+ #define ANOMALY_05000307 (0)
+ #define ANOMALY_05000311 (0)
+ #define ANOMALY_05000312 (0)
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000353 (0)
+ #define ANOMALY_05000363 (0)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000386 (0)
+ #define ANOMALY_05000412 (0)
+ #define ANOMALY_05000432 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -144,7 +144,7 @@
+        CH_UART0_TX,
+        CH_UART0_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+        CONFIG_UART0_CTS_PIN,
+        CONFIG_UART0_RTS_PIN,
+ #endif
+@@ -158,7 +158,7 @@
+        CH_UART1_TX,
+        CH_UART1_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART1_CTSRTS
+        CONFIG_UART1_CTS_PIN,
+        CONFIG_UART1_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf518/include/mach/portmux.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf518/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -103,8 +103,6 @@
+ #define P_SPI1_SSEL4  (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
+ #define P_SPI1_SSEL5  (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+-
+ /* SPORT Port Mux */
+ #define P_SPORT0_DRPRI        (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+ #define P_SPORT0_RSCLK        (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/cm_bf527.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/cm_bf527.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/cm_bf527.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/cm_bf527.c   2009-05-10 23:48:28.000000000 +0200
+@@ -403,13 +403,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -487,9 +482,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -585,13 +580,23 @@
+               .controller_data = &ad9960_spi_chip_info,
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
+-              .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -788,6 +793,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+       {
+@@ -803,6 +809,7 @@
+       },
+ #endif
+ };
++#endif
+ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ static struct platform_device bfin_sport0_uart_device = {
+@@ -913,7 +920,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -962,23 +968,27 @@
+       &bfin_gpios_device,
+ };
+-static int __init cm_init(void)
++static int __init stamp_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
++
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+       return 0;
+ }
+-arch_initcall(cm_init);
++arch_initcall(stamp_init);
+ void native_machine_restart(char *cmd)
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+ void bfin_get_ether_addr(char *addr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/ezbrd.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/ezbrd.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/ezbrd.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/ezbrd.c      2009-05-10 23:48:28.000000000 +0200
+@@ -208,13 +208,8 @@
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -256,9 +251,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -366,13 +361,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc_dummy",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -585,6 +590,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+       {
+@@ -598,6 +604,7 @@
+       },
+ #endif
+ };
++#endif
+ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ static struct platform_device bfin_sport0_uart_device = {
+@@ -713,7 +720,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -758,23 +764,27 @@
+       &bfin_gpios_device,
+ };
+-static int __init ezbrd_init(void)
++static int __init stamp_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
++
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+       return 0;
+ }
+-arch_initcall(ezbrd_init);
++arch_initcall(stamp_init);
+ void native_machine_restart(char *cmd)
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+ void bfin_get_ether_addr(char *addr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/ezkit.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/ezkit.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/boards/ezkit.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/boards/ezkit.c      2009-05-10 23:48:28.000000000 +0200
+@@ -425,13 +425,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -835,6 +830,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+       {
+@@ -848,6 +844,7 @@
+       },
+ #endif
+ };
++#endif
+ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ static struct platform_device bfin_sport0_uart_device = {
+@@ -991,7 +988,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -1052,23 +1048,27 @@
+       &bfin_gpios_device,
+ };
+-static int __init ezkit_init(void)
++static int __init stamp_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
++
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+       return 0;
+ }
+-arch_initcall(ezkit_init);
++arch_initcall(stamp_init);
+ void native_machine_restart(char *cmd)
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+ void bfin_get_ether_addr(char *addr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/anomaly.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+  * File: include/asm-blackfin/mach-bf527/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+@@ -167,16 +167,12 @@
+ #define ANOMALY_05000263 (0)
+ #define ANOMALY_05000266 (0)
+ #define ANOMALY_05000273 (0)
+-#define ANOMALY_05000278 (0)
+ #define ANOMALY_05000285 (0)
+-#define ANOMALY_05000305 (0)
+ #define ANOMALY_05000307 (0)
+ #define ANOMALY_05000311 (0)
+ #define ANOMALY_05000312 (0)
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000363 (0)
+ #define ANOMALY_05000412 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -144,7 +144,7 @@
+        CH_UART0_TX,
+        CH_UART0_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+        CONFIG_UART0_CTS_PIN,
+        CONFIG_UART0_RTS_PIN,
+ #endif
+@@ -158,7 +158,7 @@
+        CH_UART1_TX,
+        CH_UART1_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART1_CTSRTS
+        CONFIG_UART1_CTS_PIN,
+        CONFIG_UART1_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf527/include/mach/portmux.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf527/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -73,8 +73,6 @@
+ #define P_HWAIT               (P_DONTCARE)
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+-
+ #define P_SPI0_SS     (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+ #define P_SPI0_SSEL1  (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+ #define P_SPI0_SCK    (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/blackstamp.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/blackstamp.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/blackstamp.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/blackstamp.c 2009-05-10 23:48:28.000000000 +0200
+@@ -101,9 +101,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -129,13 +129,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++      {
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -299,8 +309,10 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ };
++#endif
+ static const unsigned int cclk_vlev_datasheet[] =
+ {
+@@ -378,8 +390,10 @@
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
+       ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       if (ret < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/cm_bf533.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/cm_bf533.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/cm_bf533.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/cm_bf533.c   2009-05-10 23:48:28.000000000 +0200
+@@ -96,9 +96,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -138,13 +138,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc_dummy",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/generic_board.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/generic_board.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/generic_board.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/generic_board.c      2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ * File:         arch/blackfin/mach-bf533/generic_board.c
++ * Based on:     arch/blackfin/mach-bf533/ezkit.c
++ * Author:       Aidan Williams <aidan@nicta.com.au>
++ *
++ * Created:      2005
++ * Description:
++ *
++ * Modified:
++ *               Copyright 2005 National ICT Australia (NICTA)
++ *               Copyright 2004-2006 Analog Devices Inc.
++ *
++ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ */
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++
++/*
++ * Name the Board for the /proc/cpuinfo
++ */
++const char bfin_board_name[] = "UNKNOWN BOARD";
++
++#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
++static struct platform_device rtc_device = {
++      .name = "rtc-bfin",
++      .id   = -1,
++};
++#endif
++
++/*
++ *  Driver needs to know address, irq and flag pin.
++ */
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++static struct resource smc91x_resources[] = {
++      {
++              .start = 0x20300300,
++              .end = 0x20300300 + 16,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = IRQ_PROG_INTB,
++              .end = IRQ_PROG_INTB,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      }, {
++              .start = IRQ_PF7,
++              .end = IRQ_PF7,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++
++static struct platform_device smc91x_device = {
++      .name = "smc91x",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(smc91x_resources),
++      .resource = smc91x_resources,
++};
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++static struct resource bfin_sir0_resources[] = {
++      {
++              .start = 0xFFC00400,
++              .end = 0xFFC004FF,
++              .flags = IORESOURCE_MEM,
++      },
++      {
++              .start = IRQ_UART0_RX,
++              .end = IRQ_UART0_RX+1,
++              .flags = IORESOURCE_IRQ,
++      },
++      {
++              .start = CH_UART0_RX,
++              .end = CH_UART0_RX+1,
++              .flags = IORESOURCE_DMA,
++      },
++};
++
++static struct platform_device bfin_sir0_device = {
++      .name = "bfin_sir",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(bfin_sir0_resources),
++      .resource = bfin_sir0_resources,
++};
++#endif
++#endif
++
++static struct platform_device *generic_board_devices[] __initdata = {
++#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
++      &rtc_device,
++#endif
++
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++      &smc91x_device,
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++      &bfin_sir0_device,
++#endif
++#endif
++};
++
++static int __init generic_board_init(void)
++{
++      printk(KERN_INFO "%s(): registering device resources\n", __func__);
++      return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
++}
++
++arch_initcall(generic_board_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/ip0x.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/ip0x.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/ip0x.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/ip0x.c       2009-05-10 23:48:28.000000000 +0200
+@@ -127,8 +127,8 @@
+ #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ /* all SPI peripherals info goes here */
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ /*
+  * CPOL (Clock Polarity)
+  *  0 - Active high SCK
+@@ -152,13 +152,14 @@
+ /* Notice: for blackfin, the speed_hz is the value of register
+  * SPI_BAUD, not the real baudrate */
+ static struct spi_board_info bfin_spi_board_info[] __initdata = {
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 2,
+               .bus_num = 1,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+       },
+ #endif
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/Kconfig linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/Kconfig
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/Kconfig  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/Kconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -38,4 +38,9 @@
+       help
+         Core support for IP04/IP04 open hardware IP-PBX.
++config GENERIC_BF533_BOARD
++      bool "Generic"
++      help
++        Generic or Custom board support.
++
+ endchoice
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/Makefile linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/Makefile
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/Makefile 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/Makefile     2009-05-10 23:48:28.000000000 +0200
+@@ -2,6 +2,7 @@
+ # arch/blackfin/mach-bf533/boards/Makefile
+ #
++obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
+ obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
+ obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
+ obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/stamp.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/stamp.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/boards/stamp.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/boards/stamp.c      2009-05-10 23:48:28.000000000 +0200
+@@ -441,6 +441,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+       {
+@@ -460,6 +461,7 @@
+       },
+ #endif
+ };
++#endif
+ static const unsigned int cclk_vlev_datasheet[] =
+ {
+@@ -548,8 +550,10 @@
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
+       ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       if (ret < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/anomaly.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+  * File: include/asm-blackfin/mach-bf533/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+@@ -160,7 +160,7 @@
+ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
+ /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+-/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
++/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+ /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+@@ -278,12 +278,9 @@
+ #define ANOMALY_05000266 (0)
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000353 (1)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000386 (1)
+ #define ANOMALY_05000412 (0)
+ #define ANOMALY_05000432 (0)
+ #define ANOMALY_05000435 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -134,7 +134,7 @@
+       CH_UART_TX,
+       CH_UART_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+       CONFIG_UART0_CTS_PIN,
+       CONFIG_UART0_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf533/include/mach/portmux.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf533/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -54,11 +54,14 @@
+ #define P_SPI0_SSEL2  (P_DEFINED | P_IDENT(GPIO_PF2))
+ #define P_SPI0_SSEL1  (P_DEFINED | P_IDENT(GPIO_PF1))
+ #define P_SPI0_SS     (P_DEFINED | P_IDENT(GPIO_PF0))
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+ #define P_TMR2                (P_DONTCARE)
+ #define P_TMR1                (P_DONTCARE)
+ #define P_TMR0                (P_DONTCARE)
+ #define P_TMRCLK      (P_DEFINED | P_IDENT(GPIO_PF1))
++
++
++
++
+ #endif /* _MACH_PORTMUX_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/cm_bf537.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/cm_bf537.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/cm_bf537.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/cm_bf537.c   2009-05-10 23:48:28.000000000 +0200
+@@ -108,9 +108,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -160,13 +160,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
+-              .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 1,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = 7,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -469,13 +479,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -586,7 +591,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/generic_board.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/generic_board.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/generic_board.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/generic_board.c      2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,739 @@
++/*
++ * File:         arch/blackfin/mach-bf537/boards/generic_board.c
++ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
++ * Author:       Aidan Williams <aidan@nicta.com.au>
++ *
++ * Created:
++ * Description:
++ *
++ * Modified:
++ *               Copyright 2005 National ICT Australia (NICTA)
++ *               Copyright 2004-2008 Analog Devices Inc.
++ *
++ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ */
++
++#include <linux/device.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
++#include <linux/usb/isp1362.h>
++#endif
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/usb/sl811.h>
++#include <asm/dma.h>
++#include <asm/bfin5xx_spi.h>
++#include <asm/reboot.h>
++#include <asm/portmux.h>
++#include <linux/spi/ad7877.h>
++
++/*
++ * Name the Board for the /proc/cpuinfo
++ */
++const char bfin_board_name[] = "UNKNOWN BOARD";
++
++/*
++ *  Driver needs to know address, irq and flag pin.
++ */
++
++#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
++#include <linux/usb/isp1760.h>
++static struct resource bfin_isp1760_resources[] = {
++      [0] = {
++              .start  = 0x203C0000,
++              .end    = 0x203C0000 + 0x000fffff,
++              .flags  = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start  = IRQ_PF7,
++              .end    = IRQ_PF7,
++              .flags  = IORESOURCE_IRQ,
++      },
++};
++
++static struct isp1760_platform_data isp1760_priv = {
++      .is_isp1761 = 0,
++      .port1_disable = 0,
++      .bus_width_16 = 1,
++      .port1_otg = 0,
++      .analog_oc = 0,
++      .dack_polarity_high = 0,
++      .dreq_polarity_high = 0,
++};
++
++static struct platform_device bfin_isp1760_device = {
++      .name           = "isp1760-hcd",
++      .id             = 0,
++      .dev = {
++              .platform_data = &isp1760_priv,
++      },
++      .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
++      .resource       = bfin_isp1760_resources,
++};
++#endif
++
++#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
++static struct resource bfin_pcmcia_cf_resources[] = {
++      {
++              .start = 0x20310000, /* IO PORT */
++              .end = 0x20312000,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = 0x20311000, /* Attribute Memory */
++              .end = 0x20311FFF,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = IRQ_PF4,
++              .end = IRQ_PF4,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
++      }, {
++              .start = 6, /* Card Detect PF6 */
++              .end = 6,
++              .flags = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device bfin_pcmcia_cf_device = {
++      .name = "bfin_cf_pcmcia",
++      .id = -1,
++      .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
++      .resource = bfin_pcmcia_cf_resources,
++};
++#endif
++
++#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
++static struct platform_device rtc_device = {
++      .name = "rtc-bfin",
++      .id   = -1,
++};
++#endif
++
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++static struct resource smc91x_resources[] = {
++      {
++              .name = "smc91x-regs",
++              .start = 0x20300300,
++              .end = 0x20300300 + 16,
++              .flags = IORESOURCE_MEM,
++      }, {
++
++              .start = IRQ_PF7,
++              .end = IRQ_PF7,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++static struct platform_device smc91x_device = {
++      .name = "smc91x",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(smc91x_resources),
++      .resource = smc91x_resources,
++};
++#endif
++
++#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
++static struct resource dm9000_resources[] = {
++      [0] = {
++              .start  = 0x203FB800,
++              .end    = 0x203FB800 + 1,
++              .flags  = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start  = 0x203FB800 + 4,
++              .end    = 0x203FB800 + 5,
++              .flags  = IORESOURCE_MEM,
++      },
++      [2] = {
++              .start  = IRQ_PF9,
++              .end    = IRQ_PF9,
++              .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
++      },
++};
++
++static struct platform_device dm9000_device = {
++      .name           = "dm9000",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(dm9000_resources),
++      .resource       = dm9000_resources,
++};
++#endif
++
++#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
++static struct resource sl811_hcd_resources[] = {
++      {
++              .start = 0x20340000,
++              .end = 0x20340000,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = 0x20340004,
++              .end = 0x20340004,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = CONFIG_USB_SL811_BFIN_IRQ,
++              .end = CONFIG_USB_SL811_BFIN_IRQ,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++
++#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
++void sl811_port_power(struct device *dev, int is_on)
++{
++      gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
++      gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
++
++}
++#endif
++
++static struct sl811_platform_data sl811_priv = {
++      .potpg = 10,
++      .power = 250,       /* == 500mA */
++#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
++      .port_power = &sl811_port_power,
++#endif
++};
++
++static struct platform_device sl811_hcd_device = {
++      .name = "sl811-hcd",
++      .id = 0,
++      .dev = {
++              .platform_data = &sl811_priv,
++      },
++      .num_resources = ARRAY_SIZE(sl811_hcd_resources),
++      .resource = sl811_hcd_resources,
++};
++#endif
++
++#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
++static struct resource isp1362_hcd_resources[] = {
++      {
++              .start = 0x20360000,
++              .end = 0x20360000,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = 0x20360004,
++              .end = 0x20360004,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
++              .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++
++static struct isp1362_platform_data isp1362_priv = {
++      .sel15Kres = 1,
++      .clknotstop = 0,
++      .oc_enable = 0,
++      .int_act_high = 0,
++      .int_edge_triggered = 0,
++      .remote_wakeup_connected = 0,
++      .no_power_switching = 1,
++      .power_switching_mode = 0,
++};
++
++static struct platform_device isp1362_hcd_device = {
++      .name = "isp1362-hcd",
++      .id = 0,
++      .dev = {
++              .platform_data = &isp1362_priv,
++      },
++      .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
++      .resource = isp1362_hcd_resources,
++};
++#endif
++
++#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
++static struct platform_device bfin_mac_device = {
++      .name = "bfin_mac",
++};
++#endif
++
++#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
++static struct resource net2272_bfin_resources[] = {
++      {
++              .start = 0x20300000,
++              .end = 0x20300000 + 0x100,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = IRQ_PF7,
++              .end = IRQ_PF7,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++
++static struct platform_device net2272_bfin_device = {
++      .name = "net2272",
++      .id = -1,
++      .num_resources = ARRAY_SIZE(net2272_bfin_resources),
++      .resource = net2272_bfin_resources,
++};
++#endif
++
++#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
++/* all SPI peripherals info goes here */
++
++#if defined(CONFIG_MTD_M25P80) \
++      || defined(CONFIG_MTD_M25P80_MODULE)
++static struct mtd_partition bfin_spi_flash_partitions[] = {
++      {
++              .name = "bootloader(spi)",
++              .size = 0x00020000,
++              .offset = 0,
++              .mask_flags = MTD_CAP_ROM
++      }, {
++              .name = "linux kernel(spi)",
++              .size = 0xe0000,
++              .offset = 0x20000
++      }, {
++              .name = "file system(spi)",
++              .size = 0x700000,
++              .offset = 0x00100000,
++      }
++};
++
++static struct flash_platform_data bfin_spi_flash_data = {
++      .name = "m25p80",
++      .parts = bfin_spi_flash_partitions,
++      .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
++      .type = "m25p64",
++};
++
++/* SPI flash chip (m25p64) */
++static struct bfin5xx_spi_chip spi_flash_chip_info = {
++      .enable_dma = 0,         /* use dma transfer with this chip*/
++      .bits_per_word = 8,
++};
++#endif
++
++#if defined(CONFIG_SPI_ADC_BF533) \
++      || defined(CONFIG_SPI_ADC_BF533_MODULE)
++/* SPI ADC chip */
++static struct bfin5xx_spi_chip spi_adc_chip_info = {
++      .enable_dma = 1,         /* use dma transfer with this chip*/
++      .bits_per_word = 16,
++};
++#endif
++
++#if defined(CONFIG_SND_BLACKFIN_AD1836) \
++      || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
++static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
++      .enable_dma = 0,
++      .bits_per_word = 16,
++};
++#endif
++
++#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
++static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
++      .enable_dma = 0,
++      .bits_per_word = 16,
++};
++#endif
++
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
++      .bits_per_word = 8,
++};
++#endif
++
++#if defined(CONFIG_PBX)
++static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
++      .ctl_reg        = 0x4, /* send zero */
++      .enable_dma     = 0,
++      .bits_per_word  = 8,
++      .cs_change_per_word = 1,
++};
++#endif
++
++#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
++static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
++      .enable_dma = 0,
++      .bits_per_word = 16,
++};
++
++static const struct ad7877_platform_data bfin_ad7877_ts_info = {
++      .model                  = 7877,
++      .vref_delay_usecs       = 50,   /* internal, no capacitor */
++      .x_plate_ohms           = 419,
++      .y_plate_ohms           = 486,
++      .pressure_max           = 1000,
++      .pressure_min           = 0,
++      .stopacq_polarity       = 1,
++      .first_conversion_delay = 3,
++      .acquisition_time       = 1,
++      .averaging              = 1,
++      .pen_down_acc_interval  = 1,
++};
++#endif
++
++static struct spi_board_info bfin_spi_board_info[] __initdata = {
++#if defined(CONFIG_MTD_M25P80) \
++      || defined(CONFIG_MTD_M25P80_MODULE)
++      {
++              /* the modalias must be the same as spi device driver name */
++              .modalias = "m25p80", /* Name of spi_driver for this device */
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0, /* Framework bus number */
++              .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
++              .platform_data = &bfin_spi_flash_data,
++              .controller_data = &spi_flash_chip_info,
++              .mode = SPI_MODE_3,
++      },
++#endif
++
++#if defined(CONFIG_SPI_ADC_BF533) \
++      || defined(CONFIG_SPI_ADC_BF533_MODULE)
++      {
++              .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
++              .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0, /* Framework bus number */
++              .chip_select = 1, /* Framework chip select. */
++              .platform_data = NULL, /* No spi_driver specific config */
++              .controller_data = &spi_adc_chip_info,
++      },
++#endif
++
++#if defined(CONFIG_SND_BLACKFIN_AD1836) \
++      || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
++      {
++              .modalias = "ad1836-spi",
++              .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
++              .controller_data = &ad1836_spi_chip_info,
++      },
++#endif
++#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
++      {
++              .modalias = "ad9960-spi",
++              .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 1,
++              .controller_data = &ad9960_spi_chip_info,
++      },
++#endif
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++      {
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++#endif
++#if defined(CONFIG_PBX)
++      {
++              .modalias = "fxs-spi",
++              .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 8 - CONFIG_J11_JUMPER,
++              .controller_data = &spi_si3xxx_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "fxo-spi",
++              .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 8 - CONFIG_J19_JUMPER,
++              .controller_data = &spi_si3xxx_chip_info,
++              .mode = SPI_MODE_3,
++      },
++#endif
++#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
++      {
++              .modalias               = "ad7877",
++              .platform_data          = &bfin_ad7877_ts_info,
++              .irq                    = IRQ_PF6,
++              .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num        = 0,
++              .chip_select  = 1,
++              .controller_data = &spi_ad7877_chip_info,
++      },
++#endif
++};
++
++/* SPI controller data */
++static struct bfin5xx_spi_master bfin_spi0_info = {
++      .num_chipselect = 8,
++      .enable_dma = 1,  /* master has the ability to do dma transfer */
++      .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
++};
++
++/* SPI (0) */
++static struct resource bfin_spi0_resource[] = {
++      [0] = {
++              .start = SPI0_REGBASE,
++              .end   = SPI0_REGBASE + 0xFF,
++              .flags = IORESOURCE_MEM,
++              },
++      [1] = {
++              .start = CH_SPI,
++              .end   = CH_SPI,
++              .flags = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device bfin_spi0_device = {
++      .name = "bfin-spi",
++      .id = 0, /* Bus number */
++      .num_resources = ARRAY_SIZE(bfin_spi0_resource),
++      .resource = bfin_spi0_resource,
++      .dev = {
++              .platform_data = &bfin_spi0_info, /* Passed to driver */
++      },
++};
++#endif  /* spi master and devices */
++
++#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
++static struct platform_device bfin_fb_device = {
++      .name = "bf537-lq035",
++};
++#endif
++
++#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
++static struct platform_device bfin_fb_adv7393_device = {
++      .name = "bfin-adv7393",
++};
++#endif
++
++#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
++static struct resource bfin_uart_resources[] = {
++      {
++              .start = 0xFFC00400,
++              .end = 0xFFC004FF,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = 0xFFC02000,
++              .end = 0xFFC020FF,
++              .flags = IORESOURCE_MEM,
++      },
++};
++
++static struct platform_device bfin_uart_device = {
++      .name = "bfin-uart",
++      .id = 1,
++      .num_resources = ARRAY_SIZE(bfin_uart_resources),
++      .resource = bfin_uart_resources,
++};
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++static struct resource bfin_sir0_resources[] = {
++      {
++              .start = 0xFFC00400,
++              .end = 0xFFC004FF,
++              .flags = IORESOURCE_MEM,
++      },
++      {
++              .start = IRQ_UART0_RX,
++              .end = IRQ_UART0_RX+1,
++              .flags = IORESOURCE_IRQ,
++      },
++      {
++              .start = CH_UART0_RX,
++              .end = CH_UART0_RX+1,
++              .flags = IORESOURCE_DMA,
++      },
++};
++
++static struct platform_device bfin_sir0_device = {
++      .name = "bfin_sir",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(bfin_sir0_resources),
++      .resource = bfin_sir0_resources,
++};
++#endif
++#ifdef CONFIG_BFIN_SIR1
++static struct resource bfin_sir1_resources[] = {
++      {
++              .start = 0xFFC02000,
++              .end = 0xFFC020FF,
++              .flags = IORESOURCE_MEM,
++      },
++      {
++              .start = IRQ_UART1_RX,
++              .end = IRQ_UART1_RX+1,
++              .flags = IORESOURCE_IRQ,
++      },
++      {
++              .start = CH_UART1_RX,
++              .end = CH_UART1_RX+1,
++              .flags = IORESOURCE_DMA,
++      },
++};
++
++static struct platform_device bfin_sir1_device = {
++      .name = "bfin_sir",
++      .id = 1,
++      .num_resources = ARRAY_SIZE(bfin_sir1_resources),
++      .resource = bfin_sir1_resources,
++};
++#endif
++#endif
++
++#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
++static struct resource bfin_twi0_resource[] = {
++      [0] = {
++              .start = TWI0_REGBASE,
++              .end   = TWI0_REGBASE + 0xFF,
++              .flags = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start = IRQ_TWI,
++              .end   = IRQ_TWI,
++              .flags = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device i2c_bfin_twi_device = {
++      .name = "i2c-bfin-twi",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(bfin_twi0_resource),
++      .resource = bfin_twi0_resource,
++};
++#endif
++
++#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
++static struct platform_device bfin_sport0_uart_device = {
++      .name = "bfin-sport-uart",
++      .id = 0,
++};
++
++static struct platform_device bfin_sport1_uart_device = {
++      .name = "bfin-sport-uart",
++      .id = 1,
++};
++#endif
++
++static struct platform_device *stamp_devices[] __initdata = {
++#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
++      &bfin_pcmcia_cf_device,
++#endif
++
++#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
++      &rtc_device,
++#endif
++
++#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
++      &sl811_hcd_device,
++#endif
++
++#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
++      &isp1362_hcd_device,
++#endif
++
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++      &smc91x_device,
++#endif
++
++#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
++      &dm9000_device,
++#endif
++
++#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
++      &bfin_mac_device,
++#endif
++
++#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
++      &net2272_bfin_device,
++#endif
++
++#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
++      &bfin_isp1760_device,
++#endif
++
++#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
++      &bfin_spi0_device,
++#endif
++
++#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
++      &bfin_fb_device,
++#endif
++
++#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
++      &bfin_fb_adv7393_device,
++#endif
++
++#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
++      &bfin_uart_device,
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++      &bfin_sir0_device,
++#endif
++#ifdef CONFIG_BFIN_SIR1
++      &bfin_sir1_device,
++#endif
++#endif
++
++#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
++      &i2c_bfin_twi_device,
++#endif
++
++#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
++      &bfin_sport0_uart_device,
++      &bfin_sport1_uart_device,
++#endif
++};
++
++static int __init stamp_init(void)
++{
++      printk(KERN_INFO "%s(): registering device resources\n", __func__);
++      platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
++#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
++      spi_register_board_info(bfin_spi_board_info,
++                              ARRAY_SIZE(bfin_spi_board_info));
++#endif
++
++      return 0;
++}
++
++arch_initcall(stamp_init);
++
++void native_machine_restart(char *cmd)
++{
++      /* workaround reboot hang when booting from SPI */
++      if ((bfin_read_SYSCR() & 0x7) == 0x3)
++              bfin_gpio_reset_spi0_ssel1();
++}
++
++#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
++void bfin_get_ether_addr(char *addr)
++{
++      random_ether_addr(addr);
++      printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
++}
++EXPORT_SYMBOL(bfin_get_ether_addr);
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/Kconfig linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/Kconfig
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/Kconfig  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/Kconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -33,4 +33,9 @@
+       help
+         Board supply package for CSP Minotaur
++config GENERIC_BF537_BOARD
++      bool "Generic"
++      help
++        Generic or Custom board support.
++
+ endchoice
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/Makefile linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/Makefile
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/Makefile 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/Makefile     2009-05-10 23:48:28.000000000 +0200
+@@ -2,6 +2,7 @@
+ # arch/blackfin/mach-bf537/boards/Makefile
+ #
++obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
+ obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
+ obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+ obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/minotaur.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/minotaur.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/minotaur.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/minotaur.c   2009-05-10 23:48:28.000000000 +0200
+@@ -61,13 +61,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -134,9 +129,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -156,13 +151,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++      {
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 0,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -319,7 +324,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -373,5 +377,5 @@
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/pnav10.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/pnav10.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/pnav10.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/pnav10.c     2009-05-10 23:48:28.000000000 +0200
+@@ -198,13 +198,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -289,9 +284,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -364,13 +359,23 @@
+               .controller_data = &ad9960_spi_chip_info,
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++      {
++              .modalias = "spi_mmc_dummy",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = 7,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -524,7 +529,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -554,7 +558,7 @@
+ #endif
+ };
+-static int __init pnav_init(void)
++static int __init stamp_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+@@ -565,7 +569,7 @@
+       return 0;
+ }
+-arch_initcall(pnav_init);
++arch_initcall(stamp_init);
+ void bfin_get_ether_addr(char *addr)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/stamp.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/stamp.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/stamp.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/stamp.c      2009-05-10 23:48:28.000000000 +0200
+@@ -321,13 +321,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -1073,6 +1068,7 @@
+ };
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+ #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+       {
+@@ -1106,6 +1102,7 @@
+       },
+ #endif
+ };
++#endif
+ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ static struct platform_device bfin_sport0_uart_device = {
+@@ -1220,7 +1217,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -1288,8 +1284,12 @@
+ static int __init stamp_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
++#endif
++
+       bfin_plat_nand_init();
+       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+@@ -1307,7 +1307,7 @@
+ {
+       /* workaround reboot hang when booting from SPI */
+       if ((bfin_read_SYSCR() & 0x7) == 0x3)
+-              bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
++              bfin_gpio_reset_spi0_ssel1();
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/tcm_bf537.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/boards/tcm_bf537.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/boards/tcm_bf537.c  2009-05-10 23:48:28.000000000 +0200
+@@ -108,9 +108,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -160,13 +160,23 @@
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc_dummy",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = 7,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
++              .mode = SPI_MODE_3,
++      },
++      {
++              .modalias = "spi_mmc",
++              .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
++              .bus_num = 0,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+@@ -471,13 +481,8 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-static struct platform_device bfin_mii_bus = {
+-      .name = "bfin_mii_bus",
+-};
+-
+ static struct platform_device bfin_mac_device = {
+       .name = "bfin_mac",
+-      .dev.platform_data = &bfin_mii_bus,
+ };
+ #endif
+@@ -588,7 +593,6 @@
+ #endif
+ #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+-      &bfin_mii_bus,
+       &bfin_mac_device,
+ #endif
+@@ -611,7 +615,7 @@
+       &bfin_gpios_device,
+ };
+-static int __init tcm_bf537_init(void)
++static int __init cm_bf537_init(void)
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
+       platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+@@ -625,7 +629,7 @@
+       return 0;
+ }
+-arch_initcall(tcm_bf537_init);
++arch_initcall(cm_bf537_init);
+ void bfin_get_ether_addr(char *addr)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/anomaly.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+  * File: include/asm-blackfin/mach-bf537/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+@@ -110,7 +110,7 @@
+ #define ANOMALY_05000301 (1)
+ /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+-/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
++/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+ /* SCKELOW Bit Does Not Maintain State Through Hibernate */
+ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+@@ -168,12 +168,9 @@
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000353 (1)
+ #define ANOMALY_05000363 (0)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000386 (1)
+ #define ANOMALY_05000412 (0)
+ #define ANOMALY_05000432 (0)
+ #define ANOMALY_05000435 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -144,7 +144,7 @@
+       CH_UART0_TX,
+       CH_UART0_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+       CONFIG_UART0_CTS_PIN,
+       CONFIG_UART0_RTS_PIN,
+ #endif
+@@ -158,7 +158,7 @@
+       CH_UART1_TX,
+       CH_UART1_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART1_CTSRTS
+       CONFIG_UART1_CTS_PIN,
+       CONFIG_UART1_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf537/include/mach/portmux.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf537/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -31,7 +31,6 @@
+ #define P_PPI0_FS1    (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+ #define P_TACLK0      (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+ #define P_TMRCLK      (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+ #define P_PPI0_D0     (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+ #define P_PPI0_D1     (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/anomaly.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+  * File: include/asm-blackfin/mach-bf538/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+@@ -120,17 +120,13 @@
+ #define ANOMALY_05000198 (0)
+ #define ANOMALY_05000230 (0)
+ #define ANOMALY_05000263 (0)
+-#define ANOMALY_05000305 (0)
+ #define ANOMALY_05000311 (0)
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000353 (1)
+ #define ANOMALY_05000363 (0)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000386 (1)
+ #define ANOMALY_05000412 (0)
+ #define ANOMALY_05000432 (0)
+ #define ANOMALY_05000435 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -144,7 +144,7 @@
+       CH_UART0_TX,
+       CH_UART0_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+       CONFIG_UART0_CTS_PIN,
+       CONFIG_UART0_RTS_PIN,
+ #endif
+@@ -158,7 +158,7 @@
+       CH_UART1_TX,
+       CH_UART1_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART1_CTSRTS
+       CONFIG_UART1_CTS_PIN,
+       CONFIG_UART1_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf538/include/mach/portmux.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf538/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -102,6 +102,5 @@
+ #define P_SPI0_SSEL2  (P_DEFINED | P_IDENT(GPIO_PF2))
+ #define P_SPI0_SSEL1  (P_DEFINED | P_IDENT(GPIO_PF1))
+ #define P_SPI0_SS     (P_DEFINED | P_IDENT(GPIO_PF0))
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+ #endif /* _MACH_PORTMUX_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/boards/ezkit.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/boards/ezkit.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/boards/ezkit.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/boards/ezkit.c      2009-05-10 23:48:28.000000000 +0200
+@@ -781,6 +781,7 @@
+ #endif
+ #endif
++#ifdef CONFIG_I2C_BOARDINFO
+ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
+ };
+@@ -799,6 +800,7 @@
+ #endif
+ };
+ #endif
++#endif
+ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ #include <linux/gpio_keys.h>
+@@ -954,12 +956,14 @@
+ {
+       printk(KERN_INFO "%s(): registering device resources\n", __func__);
++#ifdef CONFIG_I2C_BOARDINFO
+       i2c_register_board_info(0, bfin_i2c_board_info0,
+                               ARRAY_SIZE(bfin_i2c_board_info0));
+ #if !defined(CONFIG_BF542)    /* The BF542 only has 1 TWI */
+       i2c_register_board_info(1, bfin_i2c_board_info1,
+                               ARRAY_SIZE(bfin_i2c_board_info1));
+ #endif
++#endif
+       platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/anomaly.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,12 +2,12 @@
+  * File: include/asm-blackfin/mach-bf548/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+ /* This file shoule be up to date with:
+- *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
++ *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+  */
+ #ifndef _MACH_ANOMALY_H_
+@@ -91,6 +91,8 @@
+ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+ /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+ #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
++/* Mobile DDR Operation Not Functional */
++#define ANOMALY_05000377 (1)
+ /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
+ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+ /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+@@ -155,22 +157,8 @@
+ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+ /* Software System Reset Corrupts PLL_LOCKCNT Register */
+ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+-/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+-#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+-/* OTP Write Accesses Not Supported */
+-#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
+ /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+ #define ANOMALY_05000443 (1)
+-/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+-#define ANOMALY_05000446 (1)
+-/* UART IrDA Receiver Fails on Extended Bit Pulses */
+-#define ANOMALY_05000447 (1)
+-/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+-#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+-/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+-#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+-/* USB DMA Mode 1 Short Packet Data Corruption */
+-#define ANOMALY_05000450 (1
+ /* Anomalies that don't exist on this proc */
+ #define ANOMALY_05000125 (0)
+@@ -183,13 +171,10 @@
+ #define ANOMALY_05000263 (0)
+ #define ANOMALY_05000266 (0)
+ #define ANOMALY_05000273 (0)
+-#define ANOMALY_05000278 (0)
+-#define ANOMALY_05000305 (0)
+ #define ANOMALY_05000307 (0)
+ #define ANOMALY_05000311 (0)
+ #define ANOMALY_05000323 (0)
+ #define ANOMALY_05000363 (0)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000412 (0)
+ #define ANOMALY_05000432 (0)
+ #define ANOMALY_05000435 (0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/bf548.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/bf548.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/bf548.h    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/bf548.h        2009-05-10 23:48:28.000000000 +0200
+@@ -104,18 +104,6 @@
+ #define AMGCTLVAL     (V_AMBEN | V_AMCKEN)
+-#if defined(CONFIG_BF542M)
+-# define CONFIG_BF542
+-#elif defined(CONFIG_BF544M)
+-# define CONFIG_BF544
+-#elif defined(CONFIG_BF547M)
+-# define CONFIG_BF547
+-#elif defined(CONFIG_BF548M)
+-# define CONFIG_BF548
+-#elif defined(CONFIG_BF549M)
+-# define CONFIG_BF549
+-#endif
+-
+ #if defined(CONFIG_BF542)
+ # define CPU   "BF542"
+ # define CPUID 0x27de
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -63,7 +63,7 @@
+ #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+ #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
++#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+ # define CONFIG_SERIAL_BFIN_CTSRTS
+ # ifndef CONFIG_UART0_CTS_PIN
+@@ -74,12 +74,12 @@
+ #  define CONFIG_UART0_RTS_PIN -1
+ # endif
+-# ifndef CONFIG_UART2_CTS_PIN
+-#  define CONFIG_UART2_CTS_PIN -1
++# ifndef CONFIG_UART1_CTS_PIN
++#  define CONFIG_UART1_CTS_PIN -1
+ # endif
+-# ifndef CONFIG_UART2_RTS_PIN
+-#  define CONFIG_UART2_RTS_PIN -1
++# ifndef CONFIG_UART1_RTS_PIN
++#  define CONFIG_UART1_RTS_PIN -1
+ # endif
+ #endif
+@@ -130,7 +130,7 @@
+       CH_UART0_TX,
+       CH_UART0_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+       CONFIG_UART0_CTS_PIN,
+       CONFIG_UART0_RTS_PIN,
+ #endif
+@@ -144,10 +144,6 @@
+       CH_UART1_TX,
+       CH_UART1_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+-      0,
+-      0,
+-#endif
+       },
+ #endif
+ #ifdef CONFIG_SERIAL_BFIN_UART2
+@@ -158,7 +154,7 @@
+       CH_UART2_TX,
+       CH_UART2_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART2_CTSRTS
+       CONFIG_UART2_CTS_PIN,
+       CONFIG_UART2_RTS_PIN,
+ #endif
+@@ -172,10 +168,6 @@
+       CH_UART3_TX,
+       CH_UART3_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+-      0,
+-      0,
+-#endif
+       },
+ #endif
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/gpio.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/gpio.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/gpio.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/gpio.h 2009-05-10 23:48:28.000000000 +0200
+@@ -195,17 +195,17 @@
+ struct gpio_port_t {
+       unsigned short port_fer;
+       unsigned short dummy1;
+-      unsigned short data;
++      unsigned short port_data;
+       unsigned short dummy2;
+-      unsigned short data_set;
++      unsigned short port_set;
+       unsigned short dummy3;
+-      unsigned short data_clear;
++      unsigned short port_clear;
+       unsigned short dummy4;
+-      unsigned short dir_set;
++      unsigned short port_dir_set;
+       unsigned short dummy5;
+-      unsigned short dir_clear;
++      unsigned short port_dir_clear;
+       unsigned short dummy6;
+-      unsigned short inen;
++      unsigned short port_inen;
+       unsigned short dummy7;
+       unsigned int port_mux;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/irq.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/irq.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/irq.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/irq.h  2009-05-10 23:48:28.000000000 +0200
+@@ -123,8 +123,8 @@
+ #define IRQ_MXVR_ERROR                BFIN_IRQ(51)    /* MXVR Status (Error) Interrupt */
+ #define IRQ_MXVR_MSG          BFIN_IRQ(52)    /* MXVR Message Interrupt */
+ #define IRQ_MXVR_PKT          BFIN_IRQ(53)    /* MXVR Packet Interrupt */
+-#define IRQ_EPPI1_ERROR               BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
+-#define IRQ_EPPI2_ERROR               BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
++#define IRQ_EPP1_ERROR                BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
++#define IRQ_EPP2_ERROR                BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
+ #define IRQ_UART3_ERROR               BFIN_IRQ(56)    /* UART3 Status (Error) Interrupt */
+ #define IRQ_HOST_ERROR                BFIN_IRQ(57)    /* HOST Status (Error) Interrupt */
+ #define IRQ_PIXC_ERROR                BFIN_IRQ(59)    /* PIXC Status (Error) Interrupt */
+@@ -361,8 +361,8 @@
+ #define IRQ_UART2_ERR                 IRQ_UART2_ERROR
+ #define IRQ_CAN0_ERR                  IRQ_CAN0_ERROR
+ #define IRQ_MXVR_ERR                  IRQ_MXVR_ERROR
+-#define IRQ_EPPI1_ERR                 IRQ_EPPI1_ERROR
+-#define IRQ_EPPI2_ERR                 IRQ_EPPI2_ERROR
++#define IRQ_EPP1_ERR                  IRQ_EPP1_ERROR
++#define IRQ_EPP2_ERR                  IRQ_EPP2_ERROR
+ #define IRQ_UART3_ERR                 IRQ_UART3_ERROR
+ #define IRQ_HOST_ERR                  IRQ_HOST_ERROR
+ #define IRQ_PIXC_ERR                  IRQ_PIXC_ERROR
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf548/include/mach/portmux.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf548/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -125,7 +125,6 @@
+ #define P_KEY_COL2    (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
+ #define P_KEY_COL3    (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+ #define P_SPI0_SCK    (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+ #define P_SPI0_MISO   (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+ #define P_SPI0_MOSI   (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/cm_bf561.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/cm_bf561.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/cm_bf561.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/cm_bf561.c   2009-05-10 23:48:28.000000000 +0200
+@@ -105,9 +105,9 @@
+ };
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+-      .enable_dma = 0,
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
++static struct bfin5xx_spi_chip spi_mmc_chip_info = {
++      .enable_dma = 1,
+       .bits_per_word = 8,
+ };
+ #endif
+@@ -155,13 +155,14 @@
+               .controller_data = &ad9960_spi_chip_info,
+       },
+ #endif
+-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
++#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+       {
+-              .modalias = "mmc_spi",
++              .modalias = "spi_mmc",
+               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+-              .chip_select = 5,
+-              .controller_data = &mmc_spi_chip_info,
++              .chip_select = CONFIG_SPI_MMC_CS_CHAN,
++              .platform_data = NULL,
++              .controller_data = &spi_mmc_chip_info,
+               .mode = SPI_MODE_3,
+       },
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/generic_board.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/generic_board.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/generic_board.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/generic_board.c      2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,113 @@
++/*
++ * File:         arch/blackfin/mach-bf561/generic_board.c
++ * Based on:     arch/blackfin/mach-bf533/ezkit.c
++ * Author:       Aidan Williams <aidan@nicta.com.au>
++ *
++ * Created:
++ * Description:
++ *
++ * Modified:
++ *               Copyright 2005 National ICT Australia (NICTA)
++ *               Copyright 2004-2006 Analog Devices Inc.
++ *
++ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see the file COPYING, or write
++ * to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ */
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++
++const char bfin_board_name[] = "UNKNOWN BOARD";
++
++/*
++ *  Driver needs to know address, irq and flag pin.
++ */
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++static struct resource smc91x_resources[] = {
++      {
++              .start = 0x2C010300,
++              .end = 0x2C010300 + 16,
++              .flags = IORESOURCE_MEM,
++      }, {
++              .start = IRQ_PROG_INTB,
++              .end = IRQ_PROG_INTB,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      }, {
++              .start = IRQ_PF9,
++              .end = IRQ_PF9,
++              .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
++      },
++};
++
++static struct platform_device smc91x_device = {
++      .name = "smc91x",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(smc91x_resources),
++      .resource = smc91x_resources,
++};
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++static struct resource bfin_sir0_resources[] = {
++      {
++              .start = 0xFFC00400,
++              .end = 0xFFC004FF,
++              .flags = IORESOURCE_MEM,
++      },
++      {
++              .start = IRQ_UART0_RX,
++              .end = IRQ_UART0_RX+1,
++              .flags = IORESOURCE_IRQ,
++      },
++      {
++              .start = CH_UART0_RX,
++              .end = CH_UART0_RX+1,
++              .flags = IORESOURCE_DMA,
++      },
++};
++
++static struct platform_device bfin_sir0_device = {
++      .name = "bfin_sir",
++      .id = 0,
++      .num_resources = ARRAY_SIZE(bfin_sir0_resources),
++      .resource = bfin_sir0_resources,
++};
++#endif
++#endif
++
++static struct platform_device *generic_board_devices[] __initdata = {
++#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
++      &smc91x_device,
++#endif
++
++#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
++#ifdef CONFIG_BFIN_SIR0
++      &bfin_sir0_device,
++#endif
++#endif
++};
++
++static int __init generic_board_init(void)
++{
++      printk(KERN_INFO "%s(): registering device resources\n", __func__);
++      return platform_add_devices(generic_board_devices,
++                                  ARRAY_SIZE(generic_board_devices));
++}
++
++arch_initcall(generic_board_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/Kconfig linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/Kconfig
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/Kconfig  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/Kconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -19,4 +19,9 @@
+       help
+         CM-BF561 support for EVAL- and DEV-Board.
++config GENERIC_BF561_BOARD
++      bool "Generic"
++      help
++        Generic or Custom board support.
++
+ endchoice
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/Makefile linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/Makefile
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/boards/Makefile 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/boards/Makefile     2009-05-10 23:48:28.000000000 +0200
+@@ -2,6 +2,7 @@
+ # arch/blackfin/mach-bf561/boards/Makefile
+ #
++obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
+ obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
+ obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
+ obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/anomaly.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/anomaly.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/anomaly.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/anomaly.h      2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+  * File: include/asm-blackfin/mach-bf561/anomaly.h
+  * Bugs: Enter bugs at http://blackfin.uclinux.org/
+  *
+- * Copyright (C) 2004-2009 Analog Devices Inc.
++ * Copyright (C) 2004-2008 Analog Devices Inc.
+  * Licensed under the GPL-2 or later.
+  */
+@@ -224,7 +224,7 @@
+ #define ANOMALY_05000301 (1)
+ /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+ #define ANOMALY_05000302 (1)
+-/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
++/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+ /* SCKELOW Bit Does Not Maintain State Through Hibernate */
+ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+@@ -283,11 +283,8 @@
+ #define ANOMALY_05000273 (0)
+ #define ANOMALY_05000311 (0)
+ #define ANOMALY_05000353 (1)
+-#define ANOMALY_05000380 (0)
+ #define ANOMALY_05000386 (1)
+ #define ANOMALY_05000432 (0)
+ #define ANOMALY_05000435 (0)
+-#define ANOMALY_05000447 (0)
+-#define ANOMALY_05000448 (0)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h      2009-05-10 23:48:28.000000000 +0200
+@@ -134,7 +134,7 @@
+       CH_UART_TX,
+       CH_UART_RX,
+ #endif
+-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
++#ifdef CONFIG_BFIN_UART0_CTSRTS
+       CONFIG_UART0_CTS_PIN,
+       CONFIG_UART0_RTS_PIN,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/defBF561.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/defBF561.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/defBF561.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/defBF561.h     2009-05-10 23:48:28.000000000 +0200
+@@ -1106,8 +1106,6 @@
+ #define DLEN_8                     0x0        /* PPI Data Length mask for DLEN=8 */
+ #define DLEN(x)       (((x-9) & 0x07) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
+ #define POL                  0x0000C000       /* PPI Signal Polarities       */
+-#define       POLC            0x4000          /* PPI Clock Polarity */
+-#define       POLS            0x8000          /* PPI Frame Sync Polarity */
+ /* PPI_STATUS Masks */
+ #define FLD                0x00000400 /* Field Indicator   */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/portmux.h linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/portmux.h
+--- linux-2.6.29.owrt/arch/blackfin/mach-bf561/include/mach/portmux.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-bf561/include/mach/portmux.h      2009-05-10 23:48:28.000000000 +0200
+@@ -85,6 +85,5 @@
+ #define P_SPI0_MOSI   (P_DONTCARE)
+ #define P_SPI0_MISO   (P_DONTCARE)
+ #define P_SPI0_SCK    (P_DONTCARE)
+-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+ #endif /* _MACH_PORTMUX_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/arch_checks.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/arch_checks.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/arch_checks.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/arch_checks.c      2009-05-10 23:48:28.000000000 +0200
+@@ -62,12 +62,3 @@
+ #if (CONFIG_BOOT_LOAD & 0x3)
+ # error "The kernel load address must be 4 byte aligned"
+ #endif
+-
+-/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+-#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+-# error "The kernel load address is too high; keep it below 10meg for safety"
+-#endif
+-
+-#if ANOMALY_05000448
+-# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+-#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/cache.S linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/cache.S
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/cache.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/cache.S    2009-05-10 23:48:28.000000000 +0200
+@@ -66,33 +66,11 @@
+ /* Invalidate all instruction cache lines assocoiated with this memory area */
+ ENTRY(_blackfin_icache_flush_range)
+-/*
+- * Walkaround to avoid loading wrong instruction after invalidating icache
+- * and following sequence is met.
+- *
+- * 1) One instruction address is cached in the instruction cache.
+- * 2) This instruction in SDRAM is changed.
+- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+- * 4) This instruction is executed again, but the old one is loaded.
+- */
+-      P0 = R0;
+-      IFLUSH[P0];
+       do_flush IFLUSH, , nop
+ ENDPROC(_blackfin_icache_flush_range)
+ /* Flush all cache lines assocoiated with this area of memory. */
+ ENTRY(_blackfin_icache_dcache_flush_range)
+-/*
+- * Walkaround to avoid loading wrong instruction after invalidating icache
+- * and following sequence is met.
+- *
+- * 1) One instruction address is cached in the instruction cache.
+- * 2) This instruction in SDRAM is changed.
+- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+- * 4) This instruction is executed again, but the old one is loaded.
+- */
+-      P0 = R0;
+-      IFLUSH[P0];
+       do_flush FLUSH, IFLUSH
+ ENDPROC(_blackfin_icache_dcache_flush_range)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/clocks-init.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/clocks-init.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/clocks-init.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/clocks-init.c      2009-05-10 23:48:28.000000000 +0200
+@@ -14,10 +14,9 @@
+ #include <asm/clocks.h>
+ #include <asm/mem_init.h>
+-#define SDGCTL_WIDTH (1 << 31)        /* SDRAM external data path width */
+ #define PLL_CTL_VAL \
+       (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
+-       (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
++       (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+ __attribute__((l1_text))
+ static void do_sync(void)
+@@ -77,7 +76,7 @@
+       bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ #ifdef EBIU_SDGCTL
+       bfin_write_EBIU_SDRRC(mem_SDRRC);
+-      bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
++      bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+ #else
+       bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+       do_sync();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/dpmc_modes.S linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/dpmc_modes.S
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/dpmc_modes.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/dpmc_modes.S       2009-05-10 23:48:28.000000000 +0200
+@@ -376,22 +376,10 @@
+ #endif
+ #ifdef PINT0_ASSIGN
+-      PM_SYS_PUSH(PINT0_MASK_SET)
+-      PM_SYS_PUSH(PINT1_MASK_SET)
+-      PM_SYS_PUSH(PINT2_MASK_SET)
+-      PM_SYS_PUSH(PINT3_MASK_SET)
+       PM_SYS_PUSH(PINT0_ASSIGN)
+       PM_SYS_PUSH(PINT1_ASSIGN)
+       PM_SYS_PUSH(PINT2_ASSIGN)
+       PM_SYS_PUSH(PINT3_ASSIGN)
+-      PM_SYS_PUSH(PINT0_INVERT_SET)
+-      PM_SYS_PUSH(PINT1_INVERT_SET)
+-      PM_SYS_PUSH(PINT2_INVERT_SET)
+-      PM_SYS_PUSH(PINT3_INVERT_SET)
+-      PM_SYS_PUSH(PINT0_EDGE_SET)
+-      PM_SYS_PUSH(PINT1_EDGE_SET)
+-      PM_SYS_PUSH(PINT2_EDGE_SET)
+-      PM_SYS_PUSH(PINT3_EDGE_SET)
+ #endif
+       PM_SYS_PUSH(EBIU_AMBCTL0)
+@@ -726,22 +714,10 @@
+       PM_SYS_POP(EBIU_AMBCTL0)
+ #ifdef PINT0_ASSIGN
+-      PM_SYS_POP(PINT3_EDGE_SET)
+-      PM_SYS_POP(PINT2_EDGE_SET)
+-      PM_SYS_POP(PINT1_EDGE_SET)
+-      PM_SYS_POP(PINT0_EDGE_SET)
+-      PM_SYS_POP(PINT3_INVERT_SET)
+-      PM_SYS_POP(PINT2_INVERT_SET)
+-      PM_SYS_POP(PINT1_INVERT_SET)
+-      PM_SYS_POP(PINT0_INVERT_SET)
+       PM_SYS_POP(PINT3_ASSIGN)
+       PM_SYS_POP(PINT2_ASSIGN)
+       PM_SYS_POP(PINT1_ASSIGN)
+       PM_SYS_POP(PINT0_ASSIGN)
+-      PM_SYS_POP(PINT3_MASK_SET)
+-      PM_SYS_POP(PINT2_MASK_SET)
+-      PM_SYS_POP(PINT1_MASK_SET)
+-      PM_SYS_POP(PINT0_MASK_SET)
+ #endif
+ #ifdef SICA_IWR1
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/entry.S linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/entry.S
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/entry.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/entry.S    2009-05-10 23:48:28.000000000 +0200
+@@ -151,6 +151,13 @@
+       jump.s _bfin_return_from_exception;
+ ENDPROC(_ex_syscall)
++ENTRY(_ex_soft_bp)
++      r7 = retx;
++      r7 += -2;
++      retx = r7;
++      jump.s _ex_trap_c;
++ENDPROC(_ex_soft_bp)
++
+ ENTRY(_ex_single_step)
+       /* If we just returned from an interrupt, the single step event is
+          for the RTI instruction.  */
+@@ -600,19 +607,6 @@
+       p2 = [p2];
+       [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+-#ifdef CONFIG_IPIPE
+-      r0 = sp;
+-      SP += -12;
+-      call ___ipipe_syscall_root;
+-      SP += 12;
+-      cc = r0 == 1;
+-      if cc jump .Lsyscall_really_exit;
+-      cc = r0 == -1;
+-      if cc jump .Lresume_userspace;
+-      r3 = [sp + PT_R3];
+-      r4 = [sp + PT_R4];
+-      p0 = [sp + PT_ORIG_P0];
+-#endif /* CONFIG_IPIPE */
+       /* Check the System Call */
+       r7 = __NR_syscall;
+@@ -667,17 +661,6 @@
+       r7 =  r7 & r4;
+ .Lsyscall_resched:
+-#ifdef CONFIG_IPIPE
+-      cc = BITTST(r7, TIF_IRQ_SYNC);
+-      if !cc jump .Lsyscall_no_irqsync;
+-      [--sp] = reti;
+-      r0 = [sp++];
+-      SP += -12;
+-      call ___ipipe_sync_root;
+-      SP += 12;
+-      jump .Lresume_userspace_1;
+-.Lsyscall_no_irqsync:
+-#endif
+       cc = BITTST(r7, TIF_NEED_RESCHED);
+       if !cc jump .Lsyscall_sigpending;
+@@ -709,10 +692,6 @@
+ .Lsyscall_really_exit:
+       r5 = [sp + PT_RESERVED];
+       rets = r5;
+-#ifdef CONFIG_IPIPE
+-      [--sp] = reti;
+-      r5 = [sp++];
+-#endif /* CONFIG_IPIPE */
+       rts;
+ ENDPROC(_system_call)
+@@ -799,15 +778,6 @@
+ ENDPROC(_resume)
+ ENTRY(_ret_from_exception)
+-#ifdef CONFIG_IPIPE
+-      [--sp] = rets;
+-      SP += -12;
+-      call ___ipipe_check_root
+-      SP += 12
+-      rets = [sp++];
+-      cc = r0 == 0;
+-      if cc jump 4f;                /* not on behalf of Linux, get out */
+-#endif /* CONFIG_IPIPE */
+       p2.l = lo(IPEND);
+       p2.h = hi(IPEND);
+@@ -864,28 +834,6 @@
+       rts;
+ ENDPROC(_ret_from_exception)
+-#ifdef CONFIG_IPIPE
+-
+-_sync_root_irqs:
+-      [--sp] = reti;          /* Reenable interrupts */
+-      r0 = [sp++];
+-      jump.l ___ipipe_sync_root
+-
+-_resume_kernel_from_int:
+-      r0.l = _sync_root_irqs
+-      r0.h = _sync_root_irqs
+-      [--sp] = rets;
+-      [--sp] = ( r7:4, p5:3 );
+-      SP += -12;
+-      call ___ipipe_call_irqtail
+-      SP += 12;
+-      ( r7:4, p5:3 ) = [sp++];
+-      rets = [sp++];
+-      rts
+-#else
+-#define _resume_kernel_from_int        2f
+-#endif
+-
+ ENTRY(_return_from_int)
+       /* If someone else already raised IRQ 15, do nothing.  */
+       csync;
+@@ -907,7 +855,7 @@
+       r1 = r0 - r1;
+       r2 = r0 & r1;
+       cc = r2 == 0;
+-      if !cc jump _resume_kernel_from_int;
++      if !cc jump 2f;
+       /* Lower the interrupt level to 15.  */
+       p0.l = lo(EVT15);
+@@ -1139,7 +1087,7 @@
+        * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
+        */
+       .long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
+-      .long _ex_trap_c        /* 0x01 - User Defined - Software breakpoint */
++      .long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
+ #ifdef        CONFIG_KGDB
+       .long _ex_trap_c        /* 0x02 - User Defined - KGDB initial connection
+                                                        and break signal trap */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/head.S linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/head.S
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/head.S 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/head.S     2009-05-10 23:48:28.000000000 +0200
+@@ -17,19 +17,6 @@
+ __INIT
+-ENTRY(__init_clear_bss)
+-      r2 = r2 - r1;
+-      cc = r2 == 0;
+-      if cc jump .L_bss_done;
+-      r2 >>= 2;
+-      p1 = r1;
+-      p2 = r2;
+-      lsetup (1f, 1f) lc0 = p2;
+-1:    [p1++] = r0;
+-.L_bss_done:
+-      rts;
+-ENDPROC(__init_clear_bss)
+-
+ #define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+ ENTRY(__start)
+@@ -157,35 +144,6 @@
+       call _init_early_exception_vectors;
+ #endif
+-      r0 = 0 (x);
+-      /* Zero out all of the fun bss regions */
+-#if L1_DATA_A_LENGTH > 0
+-      r1.l = __sbss_l1;
+-      r1.h = __sbss_l1;
+-      r2.l = __ebss_l1;
+-      r2.h = __ebss_l1;
+-      call __init_clear_bss
+-#endif
+-#if L1_DATA_B_LENGTH > 0
+-      r1.l = __sbss_b_l1;
+-      r1.h = __sbss_b_l1;
+-      r2.l = __ebss_b_l1;
+-      r2.h = __ebss_b_l1;
+-      call __init_clear_bss
+-#endif
+-#if L2_LENGTH > 0
+-      r1.l = __sbss_l2;
+-      r1.h = __sbss_l2;
+-      r2.l = __ebss_l2;
+-      r2.h = __ebss_l2;
+-      call __init_clear_bss
+-#endif
+-      r1.l = ___bss_start;
+-      r1.h = ___bss_start;
+-      r2.l = ___bss_stop;
+-      r2.h = ___bss_stop;
+-      call __init_clear_bss
+-
+       /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+       call _bfin_relocate_l1_mem;
+ #ifdef CONFIG_BFIN_KERNEL_CLOCK
+@@ -227,6 +185,19 @@
+ # define WDOG_CTL WDOGA_CTL
+ #endif
++ENTRY(__init_clear_bss)
++      r2 = r2 - r1;
++      cc = r2 == 0;
++      if cc jump .L_bss_done;
++      r2 >>= 2;
++      p1 = r1;
++      p2 = r2;
++      lsetup (1f, 1f) lc0 = p2;
++1:    [p1++] = r0;
++.L_bss_done:
++      rts;
++ENDPROC(__init_clear_bss)
++
+ ENTRY(_real_start)
+       /* Enable nested interrupts */
+       [--sp] = reti;
+@@ -238,6 +209,35 @@
+       w[p0] = r0;
+       ssync;
++      r0 = 0 (x);
++      /* Zero out all of the fun bss regions */
++#if L1_DATA_A_LENGTH > 0
++      r1.l = __sbss_l1;
++      r1.h = __sbss_l1;
++      r2.l = __ebss_l1;
++      r2.h = __ebss_l1;
++      call __init_clear_bss
++#endif
++#if L1_DATA_B_LENGTH > 0
++      r1.l = __sbss_b_l1;
++      r1.h = __sbss_b_l1;
++      r2.l = __ebss_b_l1;
++      r2.h = __ebss_b_l1;
++      call __init_clear_bss
++#endif
++#if L2_LENGTH > 0
++      r1.l = __sbss_l2;
++      r1.h = __sbss_l2;
++      r2.l = __ebss_l2;
++      r2.h = __ebss_l2;
++      call __init_clear_bss
++#endif
++      r1.l = ___bss_start;
++      r1.h = ___bss_start;
++      r2.l = ___bss_stop;
++      r2.h = ___bss_stop;
++      call __init_clear_bss
++
+       /* Pass the u-boot arguments to the global value command line */
+       R0 = R7;
+       call _cmdline_init;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/interrupt.S linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/interrupt.S
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/interrupt.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/interrupt.S        2009-05-10 23:48:28.000000000 +0200
+@@ -195,7 +195,7 @@
+ /* Interrupt routine for evt2 (NMI).
+  * We don't actually use this, so just return.
+  * For inner circle type details, please see:
+- * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
++ * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+  */
+ ENTRY(_evt_nmi)
+ .weak _evt_nmi
+@@ -235,7 +235,6 @@
+ #ifdef CONFIG_IPIPE
+ ENTRY(___ipipe_call_irqtail)
+-      p0 = r0;
+       r0.l = 1f;
+       r0.h = 1f;
+       reti = r0;
+@@ -243,6 +242,9 @@
+ 1:
+       [--sp] = rets;
+       [--sp] = ( r7:4, p5:3 );
++      p0.l = ___ipipe_irq_tail_hook;
++      p0.h = ___ipipe_irq_tail_hook;
++      p0 = [p0];
+       sp += -12;
+       call (p0);
+       sp += 12;
+@@ -257,7 +259,7 @@
+       p0.h = hi(EVT14);
+       [p0] = r0;
+       csync;
+-      r0 = 0x401f (z);
++      r0 = 0x401f;
+       sti r0;
+       raise 14;
+       [--sp] = reti;          /* IRQs on. */
+@@ -275,7 +277,11 @@
+       p0.h = _bfin_irq_flags;
+       r0 = [p0];
+       sti r0;
++#if 0 /* FIXME: this actually raises scheduling latencies */
++      /* Reenable interrupts */
++      [--sp] = reti;
++      r0 = [sp++];
++#endif
+       rts;
+ ENDPROC(___ipipe_call_irqtail)
+-
+ #endif /* CONFIG_IPIPE */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/ints-priority.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/ints-priority.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/ints-priority.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/ints-priority.c    2009-05-10 23:48:28.000000000 +0200
+@@ -161,15 +161,11 @@
+ static void bfin_internal_mask_irq(unsigned int irq)
+ {
+-      unsigned long flags;
+-
+ #ifdef CONFIG_BF53x
+-      local_irq_save_hw(flags);
+       bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+                            ~(1 << SIC_SYSIRQ(irq)));
+ #else
+       unsigned mask_bank, mask_bit;
+-      local_irq_save_hw(flags);
+       mask_bank = SIC_SYSIRQ(irq) / 32;
+       mask_bit = SIC_SYSIRQ(irq) % 32;
+       bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
+@@ -179,20 +175,15 @@
+                            ~(1 << mask_bit));
+ #endif
+ #endif
+-      local_irq_restore_hw(flags);
+ }
+ static void bfin_internal_unmask_irq(unsigned int irq)
+ {
+-      unsigned long flags;
+-
+ #ifdef CONFIG_BF53x
+-      local_irq_save_hw(flags);
+       bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
+                            (1 << SIC_SYSIRQ(irq)));
+ #else
+       unsigned mask_bank, mask_bit;
+-      local_irq_save_hw(flags);
+       mask_bank = SIC_SYSIRQ(irq) / 32;
+       mask_bit = SIC_SYSIRQ(irq) % 32;
+       bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
+@@ -202,7 +193,6 @@
+                            (1 << mask_bit));
+ #endif
+ #endif
+-      local_irq_restore_hw(flags);
+ }
+ #ifdef CONFIG_PM
+@@ -400,7 +390,7 @@
+ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
+ {
+ #ifdef CONFIG_IPIPE
+-      _set_irq_handler(irq, handle_level_irq);
++      _set_irq_handler(irq, handle_edge_irq);
+ #else
+       struct irq_desc *desc = irq_desc + irq;
+       /* May not call generic set_irq_handler() due to spinlock
+@@ -1065,18 +1055,13 @@
+ #endif
+               default:
+ #ifdef CONFIG_IPIPE
+-                      /*
+-                       * We want internal interrupt sources to be
+-                       * masked, because ISRs may trigger interrupts
+-                       * recursively (e.g. DMA), but interrupts are
+-                       * _not_ masked at CPU level. So let's handle
+-                       * most of them as level interrupts, except
+-                       * the timer interrupt which is special.
+-                       */
+-                      if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+-                              set_irq_handler(irq, handle_simple_irq);
+-                      else
+-                              set_irq_handler(irq, handle_level_irq);
++      /*
++       * We want internal interrupt sources to be masked, because
++       * ISRs may trigger interrupts recursively (e.g. DMA), but
++       * interrupts are _not_ masked at CPU level. So let's handle
++       * them as level interrupts.
++       */
++                      set_irq_handler(irq, handle_level_irq);
+ #else /* !CONFIG_IPIPE */
+                       set_irq_handler(irq, handle_simple_irq);
+ #endif /* !CONFIG_IPIPE */
+@@ -1116,9 +1101,10 @@
+           IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+           IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+-#ifdef SIC_IWR0
++#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
++      || defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+       bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+-# ifdef SIC_IWR1
++#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+       /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
+        * will screw up the bootrom as it relies on MDMA0/1 waking it
+        * up from IDLE instructions.  See this report for more info:
+@@ -1128,8 +1114,10 @@
+               bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+       else
+               bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+-# endif
+-# ifdef SIC_IWR2
++#else
++      bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
++#endif
++# ifdef CONFIG_BF54x
+       bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+ # endif
+ #else
+@@ -1138,8 +1126,9 @@
+ #ifdef CONFIG_IPIPE
+       for (irq = 0; irq < NR_IRQS; irq++) {
+-              struct irq_desc *desc = irq_to_desc(irq);
++              struct irq_desc *desc = irq_desc + irq;
+               desc->ic_prio = __ipipe_get_irq_priority(irq);
++              desc->thr_prio = __ipipe_get_irqthread_priority(irq);
+       }
+ #endif /* CONFIG_IPIPE */
+@@ -1222,21 +1211,76 @@
+       return IVG15;
+ }
++int __ipipe_get_irqthread_priority(unsigned irq)
++{
++      int ient, prio;
++      int demux_irq;
++
++      /* The returned priority value is rescaled to [0..IVG13+1]
++       * with 0 being the lowest effective priority level. */
++
++      if (irq <= IRQ_CORETMR)
++              return IVG13 - irq + 1;
++
++      /* GPIO IRQs are given the priority of the demux
++       * interrupt. */
++      if (IS_GPIOIRQ(irq)) {
++#if defined(CONFIG_BF54x)
++              u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
++              demux_irq = (bank == 0 ? IRQ_PINT0 :
++                              bank == 1 ? IRQ_PINT1 :
++                              bank == 2 ? IRQ_PINT2 :
++                              IRQ_PINT3);
++#elif defined(CONFIG_BF561)
++              demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
++                              irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
++                              IRQ_PROG0_INTA);
++#elif defined(CONFIG_BF52x)
++              demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
++                              irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
++                              IRQ_PORTF_INTA);
++#else
++              demux_irq = irq;
++#endif
++              return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
++      }
++
++      /* The GPIO demux interrupt is given a lower priority
++       * than the GPIO IRQs, so that its threaded handler
++       * unmasks the interrupt line after the decoded IRQs
++       * have been processed. */
++      prio = PRIO_GPIODEMUX(irq);
++      /* demux irq? */
++      if (prio != -1)
++              return IVG13 - prio;
++
++      for (ient = 0; ient < NR_PERI_INTS; ient++) {
++              struct ivgx *ivg = ivg_table + ient;
++              if (ivg->irqno == irq) {
++                      for (prio = 0; prio <= IVG13-IVG7; prio++) {
++                              if (ivg7_13[prio].ifirst <= ivg &&
++                                  ivg7_13[prio].istop > ivg)
++                                      return IVG7 - prio;
++                      }
++              }
++      }
++
++      return 0;
++}
++
+ /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
+ #ifdef CONFIG_DO_IRQ_L1
+ __attribute__((l1_text))
+ #endif
+ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
+ {
+-      struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+-      struct ipipe_domain *this_domain = ipipe_current_domain;
+       struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
+       struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
+-      int irq, s;
++      int irq;
+       if (likely(vec == EVT_IVTMR_P)) {
+               irq = IRQ_CORETMR;
+-              goto core_tick;
++              goto handle_irq;
+       }
+       SSYNC();
+@@ -1278,39 +1322,24 @@
+       irq = ivg->irqno;
+       if (irq == IRQ_SYSTMR) {
+-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+-core_tick:
+-#else
+               bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+-#endif
+               /* This is basically what we need from the register frame. */
+               __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
+               __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
+-              if (this_domain != ipipe_root_domain)
+-                      __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+-              else
++              if (!ipipe_root_domain_p)
+                       __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
++              else
++                      __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+       }
+-#ifndef CONFIG_GENERIC_CLOCKEVENTS
+-core_tick:
+-#endif
+-      if (this_domain == ipipe_root_domain) {
+-              s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+-              barrier();
+-      }
++handle_irq:
+       ipipe_trace_irq_entry(irq);
+       __ipipe_handle_irq(irq, regs);
+-      ipipe_trace_irq_exit(irq);
++       ipipe_trace_irq_exit(irq);
+-      if (this_domain == ipipe_root_domain) {
+-              set_thread_flag(TIF_IRQ_SYNC);
+-              if (!s) {
+-                      __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+-                      return !test_bit(IPIPE_STALL_FLAG, &p->status);
+-              }
+-      }
++       if (ipipe_root_domain_p)
++              return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+        return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/pm.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/pm.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/pm.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/pm.c       2009-05-10 23:48:28.000000000 +0200
+@@ -82,9 +82,10 @@
+       bfin_pm_standby_restore();
+-#ifdef SIC_IWR0
++#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561) || \
++      defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
+       bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+-# ifdef SIC_IWR1
++#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+       /* BF52x system reset does not properly reset SIC_IWR1 which
+        * will screw up the bootrom as it relies on MDMA0/1 waking it
+        * up from IDLE instructions.  See this report for more info:
+@@ -94,8 +95,10 @@
+               bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+       else
+               bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+-# endif
+-# ifdef SIC_IWR2
++#else
++      bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
++#endif
++# ifdef CONFIG_BF54x
+       bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+ # endif
+ #else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mach-common/smp.c linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/smp.c
+--- linux-2.6.29.owrt/arch/blackfin/mach-common/smp.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mach-common/smp.c      2009-05-10 23:48:28.000000000 +0200
+@@ -158,14 +158,10 @@
+                       kfree(msg);
+                       break;
+               case BFIN_IPI_CALL_FUNC:
+-                      spin_unlock(&msg_queue->lock);
+                       ipi_call_function(cpu, msg);
+-                      spin_lock(&msg_queue->lock);
+                       break;
+               case BFIN_IPI_CPU_STOP:
+-                      spin_unlock(&msg_queue->lock);
+                       ipi_cpu_stop(cpu);
+-                      spin_lock(&msg_queue->lock);
+                       kfree(msg);
+                       break;
+               default:
+@@ -461,7 +457,7 @@
+       smp_flush_data.start = start;
+       smp_flush_data.end = end;
+-      if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
++      if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+               printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
+ }
+ EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/Makefile linux-2.6.29-rc3.owrt/arch/blackfin/Makefile
+--- linux-2.6.29.owrt/arch/blackfin/Makefile   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/Makefile       2009-05-10 23:48:28.000000000 +0200
+@@ -21,67 +21,57 @@
+ KBUILD_DEFCONFIG := BF537-STAMP_defconfig
+ # setup the machine name and the machine dependent settings
+-machine-$(CONFIG_BF512)  := bf518
+-machine-$(CONFIG_BF514)  := bf518
+-machine-$(CONFIG_BF516)  := bf518
+-machine-$(CONFIG_BF518)  := bf518
+-machine-$(CONFIG_BF522)  := bf527
+-machine-$(CONFIG_BF523)  := bf527
+-machine-$(CONFIG_BF524)  := bf527
+-machine-$(CONFIG_BF525)  := bf527
+-machine-$(CONFIG_BF526)  := bf527
+-machine-$(CONFIG_BF527)  := bf527
+-machine-$(CONFIG_BF531)  := bf533
+-machine-$(CONFIG_BF532)  := bf533
+-machine-$(CONFIG_BF533)  := bf533
+-machine-$(CONFIG_BF534)  := bf537
+-machine-$(CONFIG_BF536)  := bf537
+-machine-$(CONFIG_BF537)  := bf537
+-machine-$(CONFIG_BF538)  := bf538
+-machine-$(CONFIG_BF539)  := bf538
+-machine-$(CONFIG_BF542)  := bf548
+-machine-$(CONFIG_BF542M) := bf548
+-machine-$(CONFIG_BF544)  := bf548
+-machine-$(CONFIG_BF544M) := bf548
+-machine-$(CONFIG_BF547)  := bf548
+-machine-$(CONFIG_BF547M) := bf548
+-machine-$(CONFIG_BF548)  := bf548
+-machine-$(CONFIG_BF548M) := bf548
+-machine-$(CONFIG_BF549)  := bf548
+-machine-$(CONFIG_BF549M) := bf548
+-machine-$(CONFIG_BF561)  := bf561
++machine-$(CONFIG_BF512) := bf518
++machine-$(CONFIG_BF514) := bf518
++machine-$(CONFIG_BF516) := bf518
++machine-$(CONFIG_BF518) := bf518
++machine-$(CONFIG_BF522) := bf527
++machine-$(CONFIG_BF523) := bf527
++machine-$(CONFIG_BF524) := bf527
++machine-$(CONFIG_BF525) := bf527
++machine-$(CONFIG_BF526) := bf527
++machine-$(CONFIG_BF527) := bf527
++machine-$(CONFIG_BF531) := bf533
++machine-$(CONFIG_BF532) := bf533
++machine-$(CONFIG_BF533) := bf533
++machine-$(CONFIG_BF534) := bf537
++machine-$(CONFIG_BF536) := bf537
++machine-$(CONFIG_BF537) := bf537
++machine-$(CONFIG_BF538) := bf538
++machine-$(CONFIG_BF539) := bf538
++machine-$(CONFIG_BF542) := bf548
++machine-$(CONFIG_BF544) := bf548
++machine-$(CONFIG_BF547) := bf548
++machine-$(CONFIG_BF548) := bf548
++machine-$(CONFIG_BF549) := bf548
++machine-$(CONFIG_BF561) := bf561
+ MACHINE := $(machine-y)
+ export MACHINE
+-cpu-$(CONFIG_BF512)  := bf512
+-cpu-$(CONFIG_BF514)  := bf514
+-cpu-$(CONFIG_BF516)  := bf516
+-cpu-$(CONFIG_BF518)  := bf518
+-cpu-$(CONFIG_BF522)  := bf522
+-cpu-$(CONFIG_BF523)  := bf523
+-cpu-$(CONFIG_BF524)  := bf524
+-cpu-$(CONFIG_BF525)  := bf525
+-cpu-$(CONFIG_BF526)  := bf526
+-cpu-$(CONFIG_BF527)  := bf527
+-cpu-$(CONFIG_BF531)  := bf531
+-cpu-$(CONFIG_BF532)  := bf532
+-cpu-$(CONFIG_BF533)  := bf533
+-cpu-$(CONFIG_BF534)  := bf534
+-cpu-$(CONFIG_BF536)  := bf536
+-cpu-$(CONFIG_BF537)  := bf537
+-cpu-$(CONFIG_BF538)  := bf538
+-cpu-$(CONFIG_BF539)  := bf539
+-cpu-$(CONFIG_BF542)  := bf542
+-cpu-$(CONFIG_BF542M) := bf542m
+-cpu-$(CONFIG_BF544)  := bf544
+-cpu-$(CONFIG_BF544M) := bf544m
+-cpu-$(CONFIG_BF547)  := bf547
+-cpu-$(CONFIG_BF547M) := bf547m
+-cpu-$(CONFIG_BF548)  := bf548
+-cpu-$(CONFIG_BF548M) := bf548m
+-cpu-$(CONFIG_BF549)  := bf549
+-cpu-$(CONFIG_BF549M) := bf549m
+-cpu-$(CONFIG_BF561)  := bf561
++cpu-$(CONFIG_BF512) := bf512
++cpu-$(CONFIG_BF514) := bf514
++cpu-$(CONFIG_BF516) := bf516
++cpu-$(CONFIG_BF518) := bf518
++cpu-$(CONFIG_BF522) := bf522
++cpu-$(CONFIG_BF523) := bf523
++cpu-$(CONFIG_BF524) := bf524
++cpu-$(CONFIG_BF525) := bf525
++cpu-$(CONFIG_BF526) := bf526
++cpu-$(CONFIG_BF527) := bf527
++cpu-$(CONFIG_BF531) := bf531
++cpu-$(CONFIG_BF532) := bf532
++cpu-$(CONFIG_BF533) := bf533
++cpu-$(CONFIG_BF534) := bf534
++cpu-$(CONFIG_BF536) := bf536
++cpu-$(CONFIG_BF537) := bf537
++cpu-$(CONFIG_BF538) := bf538
++cpu-$(CONFIG_BF539) := bf539
++cpu-$(CONFIG_BF542) := bf542
++cpu-$(CONFIG_BF544) := bf544
++cpu-$(CONFIG_BF547) := bf547
++cpu-$(CONFIG_BF548) := bf548
++cpu-$(CONFIG_BF549) := bf549
++cpu-$(CONFIG_BF561) := bf561
+ rev-$(CONFIG_BF_REV_0_0)  := 0.0
+ rev-$(CONFIG_BF_REV_0_1)  := 0.1
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/blackfin/mm/init.c linux-2.6.29-rc3.owrt/arch/blackfin/mm/init.c
+--- linux-2.6.29.owrt/arch/blackfin/mm/init.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/blackfin/mm/init.c      2009-05-10 23:48:28.000000000 +0200
+@@ -104,7 +104,7 @@
+       }
+ }
+-asmlinkage void __init init_pda(void)
++asmlinkage void init_pda(void)
+ {
+       unsigned int cpu = raw_smp_processor_id();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/frv/mm/dma-alloc.c linux-2.6.29-rc3.owrt/arch/frv/mm/dma-alloc.c
+--- linux-2.6.29.owrt/arch/frv/mm/dma-alloc.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/frv/mm/dma-alloc.c      2009-05-10 23:48:28.000000000 +0200
+@@ -36,10 +36,10 @@
+ #include <linux/vmalloc.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
+-#include <linux/hardirq.h>
+ #include <asm/pgalloc.h>
+ #include <asm/io.h>
++#include <asm/hardirq.h>
+ #include <asm/mmu_context.h>
+ #include <asm/pgtable.h>
+ #include <asm/mmu.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/configs/xen_domu_defconfig linux-2.6.29-rc3.owrt/arch/ia64/configs/xen_domu_defconfig
+--- linux-2.6.29.owrt/arch/ia64/configs/xen_domu_defconfig     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/configs/xen_domu_defconfig 1970-01-01 01:00:00.000000000 +0100
+@@ -1,1601 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc1
+-# Fri Jan 16 11:49:59 2009
+-#
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_LOCK_KERNEL=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-CONFIG_IKCONFIG=y
+-CONFIG_IKCONFIG_PROC=y
+-CONFIG_LOG_BUF_SHIFT=20
+-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+-# CONFIG_GROUP_SCHED is not set
+-
+-#
+-# Control Group support
+-#
+-# CONFIG_CGROUPS is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-CONFIG_NAMESPACES=y
+-# CONFIG_UTS_NS is not set
+-# CONFIG_IPC_NS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+-CONFIG_SYSCTL=y
+-# CONFIG_EMBEDDED is not set
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_STRIP_GENERATED=y
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_AIO=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_HAVE_ARCH_TRACEHOOK=y
+-CONFIG_HAVE_DMA_ATTRS=y
+-CONFIG_USE_GENERIC_SMP_HELPERS=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-CONFIG_MODVERSIONS=y
+-CONFIG_MODULE_SRCVERSION_ALL=y
+-CONFIG_STOP_MACHINE=y
+-CONFIG_BLOCK=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+-CONFIG_FREEZER=y
+-
+-#
+-# Processor type and features
+-#
+-CONFIG_IA64=y
+-CONFIG_64BIT=y
+-CONFIG_ZONE_DMA=y
+-CONFIG_QUICKLIST=y
+-CONFIG_MMU=y
+-CONFIG_SWIOTLB=y
+-CONFIG_IOMMU_HELPER=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+-CONFIG_DMI=y
+-CONFIG_EFI=y
+-CONFIG_GENERIC_IOMAP=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_PARAVIRT_GUEST=y
+-CONFIG_PARAVIRT=y
+-CONFIG_XEN=y
+-CONFIG_XEN_XENCOMM=y
+-CONFIG_NO_IDLE_HZ=y
+-# CONFIG_IA64_GENERIC is not set
+-# CONFIG_IA64_DIG is not set
+-# CONFIG_IA64_DIG_VTD is not set
+-# CONFIG_IA64_HP_ZX1 is not set
+-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+-# CONFIG_IA64_SGI_SN2 is not set
+-# CONFIG_IA64_SGI_UV is not set
+-# CONFIG_IA64_HP_SIM is not set
+-CONFIG_IA64_XEN_GUEST=y
+-# CONFIG_ITANIUM is not set
+-CONFIG_MCKINLEY=y
+-# CONFIG_IA64_PAGE_SIZE_4KB is not set
+-# CONFIG_IA64_PAGE_SIZE_8KB is not set
+-CONFIG_IA64_PAGE_SIZE_16KB=y
+-# CONFIG_IA64_PAGE_SIZE_64KB is not set
+-CONFIG_PGTABLE_3=y
+-# CONFIG_PGTABLE_4 is not set
+-CONFIG_HZ=250
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_IA64_L1_CACHE_SHIFT=7
+-CONFIG_IA64_CYCLONE=y
+-CONFIG_IOSAPIC=y
+-CONFIG_FORCE_MAX_ZONEORDER=17
+-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+-CONFIG_SMP=y
+-CONFIG_NR_CPUS=16
+-CONFIG_HOTPLUG_CPU=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-# CONFIG_SCHED_SMT is not set
+-CONFIG_PERMIT_BSP_REMOVE=y
+-CONFIG_FORCE_CPEI_RETARGET=y
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_MIGRATION=y
+-CONFIG_PHYS_ADDR_T_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_NR_QUICK=1
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_SPARSEMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_VIRTUAL_MEM_MAP=y
+-CONFIG_HOLES_IN_ZONE=y
+-# CONFIG_IA32_SUPPORT is not set
+-# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
+-CONFIG_IA64_MCA_RECOVERY=y
+-CONFIG_PERFMON=y
+-CONFIG_IA64_PALINFO=y
+-# CONFIG_IA64_MC_ERR_INJECT is not set
+-# CONFIG_IA64_ESI is not set
+-# CONFIG_IA64_HP_AML_NFW is not set
+-CONFIG_KEXEC=y
+-# CONFIG_CRASH_DUMP is not set
+-
+-#
+-# Firmware Drivers
+-#
+-# CONFIG_FIRMWARE_MEMMAP is not set
+-CONFIG_EFI_VARS=y
+-CONFIG_EFI_PCDP=y
+-CONFIG_DMIID=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+-CONFIG_BINFMT_MISC=m
+-
+-#
+-# Power management and ACPI options
+-#
+-CONFIG_PM=y
+-# CONFIG_PM_DEBUG is not set
+-CONFIG_PM_SLEEP=y
+-CONFIG_SUSPEND=y
+-CONFIG_SUSPEND_FREEZER=y
+-CONFIG_ACPI=y
+-CONFIG_ACPI_SLEEP=y
+-CONFIG_ACPI_PROCFS=y
+-CONFIG_ACPI_PROCFS_POWER=y
+-CONFIG_ACPI_SYSFS_POWER=y
+-CONFIG_ACPI_PROC_EVENT=y
+-CONFIG_ACPI_BUTTON=m
+-CONFIG_ACPI_FAN=m
+-# CONFIG_ACPI_DOCK is not set
+-CONFIG_ACPI_PROCESSOR=m
+-CONFIG_ACPI_HOTPLUG_CPU=y
+-CONFIG_ACPI_THERMAL=m
+-# CONFIG_ACPI_CUSTOM_DSDT is not set
+-CONFIG_ACPI_BLACKLIST_YEAR=0
+-# CONFIG_ACPI_DEBUG is not set
+-# CONFIG_ACPI_PCI_SLOT is not set
+-CONFIG_ACPI_SYSTEM=y
+-CONFIG_ACPI_CONTAINER=m
+-
+-#
+-# CPU Frequency scaling
+-#
+-# CONFIG_CPU_FREQ is not set
+-
+-#
+-# Bus options (PCI, PCMCIA)
+-#
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+-CONFIG_HOTPLUG_PCI=m
+-# CONFIG_HOTPLUG_PCI_FAKE is not set
+-CONFIG_HOTPLUG_PCI_ACPI=m
+-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+-# CONFIG_HOTPLUG_PCI_CPCI is not set
+-# CONFIG_HOTPLUG_PCI_SHPC is not set
+-# CONFIG_PCCARD is not set
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-# CONFIG_NET_NS is not set
+-CONFIG_COMPAT_NET_DEV_OPS=y
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_PNP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-CONFIG_ARPD=y
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-# CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-# CONFIG_PARPORT is not set
+-CONFIG_PNP=y
+-CONFIG_PNP_DEBUG_MESSAGES=y
+-
+-#
+-# Protocols
+-#
+-CONFIG_PNPACPI=y
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=m
+-CONFIG_BLK_DEV_CRYPTOLOOP=m
+-CONFIG_BLK_DEV_NBD=m
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_XEN_BLKDEV_FRONTEND=y
+-# CONFIG_BLK_DEV_HD is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ICS932S401 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_HP_ILO is not set
+-# CONFIG_C2PORT is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-CONFIG_IDE_TIMINGS=y
+-CONFIG_IDE_ATAPI=y
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_IDE_GD=y
+-CONFIG_IDE_GD_ATA=y
+-# CONFIG_IDE_GD_ATAPI is not set
+-CONFIG_BLK_DEV_IDECD=y
+-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEACPI is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-# CONFIG_IDE_GENERIC is not set
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-# CONFIG_BLK_DEV_IDEPNP is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-CONFIG_BLK_DEV_CMD64X=y
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-CONFIG_BLK_DEV_PIIX=y
+-# CONFIG_BLK_DEV_IT8172 is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-# CONFIG_BLK_DEV_VIA82CXXX is not set
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-CONFIG_SCSI_NETLINK=y
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-CONFIG_CHR_DEV_ST=m
+-# CONFIG_CHR_DEV_OSST is not set
+-CONFIG_BLK_DEV_SR=m
+-# CONFIG_BLK_DEV_SR_VENDOR is not set
+-CONFIG_CHR_DEV_SG=m
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-CONFIG_SCSI_FC_ATTRS=y
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-CONFIG_SCSI_SYM53C8XX_2=y
+-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+-CONFIG_SCSI_SYM53C8XX_MMIO=y
+-CONFIG_SCSI_QLOGIC_1280=y
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_SCSI_DH is not set
+-# CONFIG_ATA is not set
+-CONFIG_MD=y
+-CONFIG_BLK_DEV_MD=m
+-CONFIG_MD_LINEAR=m
+-CONFIG_MD_RAID0=m
+-CONFIG_MD_RAID1=m
+-# CONFIG_MD_RAID10 is not set
+-# CONFIG_MD_RAID456 is not set
+-CONFIG_MD_MULTIPATH=m
+-# CONFIG_MD_FAULTY is not set
+-CONFIG_BLK_DEV_DM=m
+-# CONFIG_DM_DEBUG is not set
+-CONFIG_DM_CRYPT=m
+-CONFIG_DM_SNAPSHOT=m
+-CONFIG_DM_MIRROR=m
+-CONFIG_DM_ZERO=m
+-# CONFIG_DM_MULTIPATH is not set
+-# CONFIG_DM_DELAY is not set
+-# CONFIG_DM_UEVENT is not set
+-CONFIG_FUSION=y
+-CONFIG_FUSION_SPI=y
+-CONFIG_FUSION_FC=y
+-# CONFIG_FUSION_SAS is not set
+-CONFIG_FUSION_MAX_SGE=128
+-CONFIG_FUSION_CTL=y
+-# CONFIG_FUSION_LOGGING is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# Enable only one of the two stacks, unless you know what you are doing
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-CONFIG_NETDEVICES=y
+-CONFIG_DUMMY=m
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_NET_SB1000 is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=m
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-CONFIG_NET_TULIP=y
+-# CONFIG_DE2104X is not set
+-CONFIG_TULIP=m
+-# CONFIG_TULIP_MWI is not set
+-# CONFIG_TULIP_MMIO is not set
+-# CONFIG_TULIP_NAPI is not set
+-# CONFIG_DE4X5 is not set
+-# CONFIG_WINBOND_840 is not set
+-# CONFIG_DM9102 is not set
+-# CONFIG_ULI526X is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-CONFIG_E100=m
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-# CONFIG_ATL2 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-CONFIG_E1000=y
+-# CONFIG_E1000E is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_VIA_VELOCITY is not set
+-CONFIG_TIGON3=y
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-# CONFIG_ATL1E is not set
+-# CONFIG_JME is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_ENIC is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_EN is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_QLGE is not set
+-# CONFIG_SFC is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-CONFIG_XEN_NETDEV_FRONTEND=y
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-CONFIG_NETCONSOLE=y
+-# CONFIG_NETCONSOLE_DYNAMIC is not set
+-CONFIG_NETPOLL=y
+-# CONFIG_NETPOLL_TRAP is not set
+-CONFIG_NET_POLL_CONTROLLER=y
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-CONFIG_INPUT_MOUSEDEV=y
+-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-CONFIG_INPUT_KEYBOARD=y
+-CONFIG_KEYBOARD_ATKBD=y
+-# CONFIG_KEYBOARD_SUNKBD is not set
+-# CONFIG_KEYBOARD_LKKBD is not set
+-# CONFIG_KEYBOARD_XTKBD is not set
+-# CONFIG_KEYBOARD_NEWTON is not set
+-# CONFIG_KEYBOARD_STOWAWAY is not set
+-CONFIG_INPUT_MOUSE=y
+-CONFIG_MOUSE_PS2=y
+-CONFIG_MOUSE_PS2_ALPS=y
+-CONFIG_MOUSE_PS2_LOGIPS2PP=y
+-CONFIG_MOUSE_PS2_SYNAPTICS=y
+-CONFIG_MOUSE_PS2_LIFEBOOK=y
+-CONFIG_MOUSE_PS2_TRACKPOINT=y
+-# CONFIG_MOUSE_PS2_ELANTECH is not set
+-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+-# CONFIG_MOUSE_SERIAL is not set
+-# CONFIG_MOUSE_APPLETOUCH is not set
+-# CONFIG_MOUSE_BCM5974 is not set
+-# CONFIG_MOUSE_VSXXXAA is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-CONFIG_SERIO=y
+-CONFIG_SERIO_I8042=y
+-# CONFIG_SERIO_SERPORT is not set
+-# CONFIG_SERIO_PCIPS2 is not set
+-CONFIG_SERIO_LIBPS2=y
+-# CONFIG_SERIO_RAW is not set
+-CONFIG_GAMEPORT=m
+-# CONFIG_GAMEPORT_NS558 is not set
+-# CONFIG_GAMEPORT_L4 is not set
+-# CONFIG_GAMEPORT_EMU10K1 is not set
+-# CONFIG_GAMEPORT_FM801 is not set
+-
+-#
+-# Character devices
+-#
+-CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+-CONFIG_VT_CONSOLE=y
+-CONFIG_HW_CONSOLE=y
+-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+-CONFIG_SERIAL_NONSTANDARD=y
+-# CONFIG_COMPUTONE is not set
+-# CONFIG_ROCKETPORT is not set
+-# CONFIG_CYCLADES is not set
+-# CONFIG_DIGIEPCA is not set
+-# CONFIG_MOXA_INTELLIO is not set
+-# CONFIG_MOXA_SMARTIO is not set
+-# CONFIG_ISI is not set
+-# CONFIG_SYNCLINKMP is not set
+-# CONFIG_SYNCLINK_GT is not set
+-# CONFIG_N_HDLC is not set
+-# CONFIG_RISCOM8 is not set
+-# CONFIG_SPECIALIX is not set
+-# CONFIG_SX is not set
+-# CONFIG_RIO is not set
+-# CONFIG_STALDRV is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_PNP=y
+-CONFIG_SERIAL_8250_NR_UARTS=6
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-CONFIG_HVC_DRIVER=y
+-CONFIG_HVC_IRQ=y
+-CONFIG_HVC_XEN=y
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-CONFIG_EFI_RTC=y
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-CONFIG_RAW_DRIVER=m
+-CONFIG_MAX_RAW_DEVS=256
+-CONFIG_HPET=y
+-CONFIG_HPET_MMAP=y
+-# CONFIG_HANGCHECK_TIMER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=m
+-CONFIG_I2C_BOARDINFO=y
+-# CONFIG_I2C_CHARDEV is not set
+-CONFIG_I2C_HELPER_AUTO=y
+-CONFIG_I2C_ALGOBIT=m
+-
+-#
+-# I2C Hardware Bus support
+-#
+-
+-#
+-# PC SMBus host controller drivers
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_ISCH is not set
+-# CONFIG_I2C_PIIX4 is not set
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-
+-#
+-# I2C system bus drivers (mostly embedded / system-on-chip)
+-#
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_SIMTEC is not set
+-
+-#
+-# External I2C/SMBus adapter drivers
+-#
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_TINY_USB is not set
+-
+-#
+-# Graphics adapter I2C/DDC channel drivers
+-#
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Other I2C/SMBus bus drivers
+-#
+-# CONFIG_I2C_PCA_PLATFORM is not set
+-# CONFIG_I2C_STUB is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_AT24 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-# CONFIG_SPI is not set
+-# CONFIG_W1 is not set
+-CONFIG_POWER_SUPPLY=y
+-# CONFIG_POWER_SUPPLY_DEBUG is not set
+-# CONFIG_PDA_POWER is not set
+-# CONFIG_BATTERY_DS2760 is not set
+-# CONFIG_BATTERY_BQ27x00 is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7414 is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7462 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_LTC4245 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_SENSORS_LIS3LV02D is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-CONFIG_THERMAL=m
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_CORE is not set
+-# CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_MFD_WM8400 is not set
+-# CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+-# CONFIG_REGULATOR is not set
+-
+-#
+-# Multimedia devices
+-#
+-
+-#
+-# Multimedia core support
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
+-
+-#
+-# Multimedia drivers
+-#
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-CONFIG_AGP=m
+-CONFIG_DRM=m
+-CONFIG_DRM_TDFX=m
+-CONFIG_DRM_R128=m
+-CONFIG_DRM_RADEON=m
+-CONFIG_DRM_MGA=m
+-CONFIG_DRM_SIS=m
+-# CONFIG_DRM_VIA is not set
+-# CONFIG_DRM_SAVAGE is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Console display driver support
+-#
+-CONFIG_VGA_CONSOLE=y
+-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+-CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-CONFIG_USB_HID=y
+-# CONFIG_HID_PID is not set
+-# CONFIG_USB_HIDDEV is not set
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+-CONFIG_HID_A4TECH=y
+-CONFIG_HID_APPLE=y
+-CONFIG_HID_BELKIN=y
+-CONFIG_HID_CHERRY=y
+-CONFIG_HID_CHICONY=y
+-CONFIG_HID_CYPRESS=y
+-CONFIG_HID_EZKEY=y
+-CONFIG_HID_GYRATION=y
+-CONFIG_HID_LOGITECH=y
+-# CONFIG_LOGITECH_FF is not set
+-# CONFIG_LOGIRUMBLEPAD2_FF is not set
+-CONFIG_HID_MICROSOFT=y
+-CONFIG_HID_MONTEREY=y
+-CONFIG_HID_NTRIG=y
+-CONFIG_HID_PANTHERLORD=y
+-# CONFIG_PANTHERLORD_FF is not set
+-CONFIG_HID_PETALYNX=y
+-CONFIG_HID_SAMSUNG=y
+-CONFIG_HID_SONY=y
+-CONFIG_HID_SUNPLUS=y
+-# CONFIG_GREENASIA_FF is not set
+-CONFIG_HID_TOPSEED=y
+-# CONFIG_THRUSTMASTER_FF is not set
+-# CONFIG_ZEROPLUS_FF is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_SUSPEND is not set
+-# CONFIG_USB_OTG is not set
+-# CONFIG_USB_MON is not set
+-# CONFIG_USB_WUSB is not set
+-# CONFIG_USB_WUSB_CBAF is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-# CONFIG_USB_C67X00_HCD is not set
+-CONFIG_USB_EHCI_HCD=m
+-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+-# CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_ISP1760_HCD is not set
+-CONFIG_USB_OHCI_HCD=m
+-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-CONFIG_USB_UHCI_HCD=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-# CONFIG_USB_WHCI_HCD is not set
+-# CONFIG_USB_HWA_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-# CONFIG_USB_WDM is not set
+-# CONFIG_USB_TMC is not set
+-
+-#
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+-#
+-
+-#
+-# see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=m
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_ONETOUCH is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_SEVSEG is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_ISIGHTFW is not set
+-# CONFIG_USB_VST is not set
+-# CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+-# CONFIG_UWB is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-# CONFIG_UIO is not set
+-CONFIG_XEN_BALLOON=y
+-CONFIG_XEN_SCRUB_PAGES=y
+-CONFIG_XENFS=y
+-CONFIG_XEN_COMPAT_XENFS=y
+-# CONFIG_STAGING is not set
+-# CONFIG_MSPEC is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-CONFIG_EXT2_FS_XATTR=y
+-CONFIG_EXT2_FS_POSIX_ACL=y
+-CONFIG_EXT2_FS_SECURITY=y
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-CONFIG_EXT3_FS_POSIX_ACL=y
+-CONFIG_EXT3_FS_SECURITY=y
+-# CONFIG_EXT4_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-CONFIG_REISERFS_FS=y
+-# CONFIG_REISERFS_CHECK is not set
+-# CONFIG_REISERFS_PROC_INFO is not set
+-CONFIG_REISERFS_FS_XATTR=y
+-CONFIG_REISERFS_FS_POSIX_ACL=y
+-CONFIG_REISERFS_FS_SECURITY=y
+-# CONFIG_JFS_FS is not set
+-CONFIG_FS_POSIX_ACL=y
+-CONFIG_FILE_LOCKING=y
+-CONFIG_XFS_FS=y
+-# CONFIG_XFS_QUOTA is not set
+-# CONFIG_XFS_POSIX_ACL is not set
+-# CONFIG_XFS_RT is not set
+-# CONFIG_XFS_DEBUG is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-CONFIG_AUTOFS_FS=y
+-CONFIG_AUTOFS4_FS=y
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-CONFIG_ISO9660_FS=m
+-CONFIG_JOLIET=y
+-# CONFIG_ZISOFS is not set
+-CONFIG_UDF_FS=m
+-CONFIG_UDF_NLS=y
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-# CONFIG_MSDOS_FS is not set
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-CONFIG_NTFS_FS=m
+-# CONFIG_NTFS_DEBUG is not set
+-# CONFIG_NTFS_RW is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-CONFIG_HUGETLBFS=y
+-CONFIG_HUGETLB_PAGE=y
+-# CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=m
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-CONFIG_NFSD=m
+-CONFIG_NFSD_V3=y
+-# CONFIG_NFSD_V3_ACL is not set
+-CONFIG_NFSD_V4=y
+-CONFIG_LOCKD=m
+-CONFIG_LOCKD_V4=y
+-CONFIG_EXPORTFS=m
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=m
+-CONFIG_SUNRPC_GSS=m
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
+-CONFIG_RPCSEC_GSS_KRB5=m
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-CONFIG_SMB_FS=m
+-CONFIG_SMB_NLS_DEFAULT=y
+-CONFIG_SMB_NLS_REMOTE="cp437"
+-CONFIG_CIFS=m
+-# CONFIG_CIFS_STATS is not set
+-# CONFIG_CIFS_WEAK_PW_HASH is not set
+-# CONFIG_CIFS_XATTR is not set
+-# CONFIG_CIFS_DEBUG2 is not set
+-# CONFIG_CIFS_EXPERIMENTAL is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-CONFIG_SGI_PARTITION=y
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-CONFIG_EFI_PARTITION=y
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-CONFIG_NLS_CODEPAGE_437=y
+-CONFIG_NLS_CODEPAGE_737=m
+-CONFIG_NLS_CODEPAGE_775=m
+-CONFIG_NLS_CODEPAGE_850=m
+-CONFIG_NLS_CODEPAGE_852=m
+-CONFIG_NLS_CODEPAGE_855=m
+-CONFIG_NLS_CODEPAGE_857=m
+-CONFIG_NLS_CODEPAGE_860=m
+-CONFIG_NLS_CODEPAGE_861=m
+-CONFIG_NLS_CODEPAGE_862=m
+-CONFIG_NLS_CODEPAGE_863=m
+-CONFIG_NLS_CODEPAGE_864=m
+-CONFIG_NLS_CODEPAGE_865=m
+-CONFIG_NLS_CODEPAGE_866=m
+-CONFIG_NLS_CODEPAGE_869=m
+-CONFIG_NLS_CODEPAGE_936=m
+-CONFIG_NLS_CODEPAGE_950=m
+-CONFIG_NLS_CODEPAGE_932=m
+-CONFIG_NLS_CODEPAGE_949=m
+-CONFIG_NLS_CODEPAGE_874=m
+-CONFIG_NLS_ISO8859_8=m
+-CONFIG_NLS_CODEPAGE_1250=m
+-CONFIG_NLS_CODEPAGE_1251=m
+-# CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
+-CONFIG_NLS_ISO8859_2=m
+-CONFIG_NLS_ISO8859_3=m
+-CONFIG_NLS_ISO8859_4=m
+-CONFIG_NLS_ISO8859_5=m
+-CONFIG_NLS_ISO8859_6=m
+-CONFIG_NLS_ISO8859_7=m
+-CONFIG_NLS_ISO8859_9=m
+-CONFIG_NLS_ISO8859_13=m
+-CONFIG_NLS_ISO8859_14=m
+-CONFIG_NLS_ISO8859_15=m
+-CONFIG_NLS_KOI8_R=m
+-CONFIG_NLS_KOI8_U=m
+-CONFIG_NLS_UTF8=m
+-# CONFIG_DLM is not set
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=2048
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-CONFIG_DEBUG_MUTEXES=y
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-CONFIG_DEBUG_MEMORY_INIT=y
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+-CONFIG_IA64_GRANULE_16MB=y
+-# CONFIG_IA64_GRANULE_64MB is not set
+-# CONFIG_IA64_PRINT_HAZARDS is not set
+-# CONFIG_DISABLE_VHPT is not set
+-# CONFIG_IA64_DEBUG_CMPXCHG is not set
+-# CONFIG_IA64_DEBUG_IRQ is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
+-CONFIG_CRYPTO_BLKCIPHER=m
+-CONFIG_CRYPTO_BLKCIPHER2=y
+-CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
+-CONFIG_CRYPTO_MANAGER=m
+-CONFIG_CRYPTO_MANAGER2=y
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=m
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-CONFIG_CRYPTO_ECB=m
+-# CONFIG_CRYPTO_LRW is not set
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-
+-#
+-# Ciphers
+-#
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-CONFIG_CRYPTO_DES=m
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-
+-#
+-# Compression
+-#
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-CONFIG_HAVE_KVM=y
+-CONFIG_VIRTUALIZATION=y
+-# CONFIG_KVM is not set
+-# CONFIG_VIRTIO_PCI is not set
+-# CONFIG_VIRTIO_BALLOON is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+-CONFIG_CRC_ITU_T=m
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-CONFIG_GENERIC_HARDIRQS=y
+-CONFIG_GENERIC_IRQ_PROBE=y
+-CONFIG_GENERIC_PENDING_IRQ=y
+-CONFIG_IRQ_PER_CPU=y
+-# CONFIG_IOMMU_API is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/hp/common/sba_iommu.c linux-2.6.29-rc3.owrt/arch/ia64/hp/common/sba_iommu.c
+--- linux-2.6.29.owrt/arch/ia64/hp/common/sba_iommu.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/hp/common/sba_iommu.c      2009-05-10 23:48:28.000000000 +0200
+@@ -906,7 +906,7 @@
+  * @dir:  R/W or both.
+  * @attrs: optional dma attributes
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ dma_addr_t
+ sba_map_single_attrs(struct device *dev, void *addr, size_t size, int dir,
+@@ -1024,7 +1024,7 @@
+  * @dir:  R/W or both.
+  * @attrs: optional dma attributes
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
+                           int dir, struct dma_attrs *attrs)
+@@ -1102,7 +1102,7 @@
+  * @size:  number of bytes mapped in driver buffer.
+  * @dma_handle:  IOVA of new buffer.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ void *
+ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
+@@ -1165,7 +1165,7 @@
+  * @vaddr:  virtual address IOVA of "consistent" buffer.
+  * @dma_handler:  IO virtual address of "consistent" buffer.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle)
+ {
+@@ -1420,7 +1420,7 @@
+  * @dir:  R/W or both.
+  * @attrs: optional dma attributes
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents,
+                    int dir, struct dma_attrs *attrs)
+@@ -1512,7 +1512,7 @@
+  * @dir:  R/W or both.
+  * @attrs: optional dma attributes
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
+                       int nents, int dir, struct dma_attrs *attrs)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/include/asm/kvm.h linux-2.6.29-rc3.owrt/arch/ia64/include/asm/kvm.h
+--- linux-2.6.29.owrt/arch/ia64/include/asm/kvm.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/include/asm/kvm.h  2009-05-10 23:48:28.000000000 +0200
+@@ -25,10 +25,6 @@
+ #include <linux/ioctl.h>
+-/* Select x86 specific features in <linux/kvm.h> */
+-#define __KVM_HAVE_IOAPIC
+-#define __KVM_HAVE_DEVICE_ASSIGNMENT
+-
+ /* Architectural interrupt line count. */
+ #define KVM_NR_INTERRUPTS 256
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/include/asm/mmzone.h linux-2.6.29-rc3.owrt/arch/ia64/include/asm/mmzone.h
+--- linux-2.6.29.owrt/arch/ia64/include/asm/mmzone.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/include/asm/mmzone.h       2009-05-10 23:48:28.000000000 +0200
+@@ -31,6 +31,10 @@
+ #endif
+ }
++#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
++extern int early_pfn_to_nid(unsigned long pfn);
++#endif
++
+ #ifdef CONFIG_IA64_DIG /* DIG systems are small */
+ # define MAX_PHYSNODE_ID      8
+ # define NR_NODE_MEMBLKS      (MAX_NUMNODES * 8)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/include/asm/sn/bte.h linux-2.6.29-rc3.owrt/arch/ia64/include/asm/sn/bte.h
+--- linux-2.6.29.owrt/arch/ia64/include/asm/sn/bte.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/include/asm/sn/bte.h       2009-05-10 23:48:28.000000000 +0200
+@@ -39,7 +39,7 @@
+ /* BTE status register only supports 16 bits for length field */
+ #define BTE_LEN_BITS (16)
+ #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+-#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
++#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+ /* Define hardware */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/Kconfig linux-2.6.29-rc3.owrt/arch/ia64/Kconfig
+--- linux-2.6.29.owrt/arch/ia64/Kconfig        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/Kconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -221,11 +221,7 @@
+ config IA64_XEN_GUEST
+       bool "Xen guest"
+-      select SWIOTLB
+       depends on XEN
+-      help
+-        Build a kernel that runs on Xen guest domain. At this moment only
+-        16KB page size in supported.
+ endchoice
+@@ -483,7 +479,8 @@
+       default y if VIRTUAL_MEM_MAP
+ config HAVE_ARCH_EARLY_PFN_TO_NID
+-      def_bool NUMA && SPARSEMEM
++      def_bool y
++      depends on NEED_MULTIPLE_NODES
+ config HAVE_ARCH_NODEDATA_EXTENSION
+       def_bool y
+@@ -638,17 +635,6 @@
+         and include PCI device scope covered by these DMA
+         remapping devices.
+-config DMAR_DEFAULT_ON
+-      def_bool y
+-      prompt "Enable DMA Remapping Devices by default"
+-      depends on DMAR
+-      help
+-        Selecting this option will enable a DMAR device at boot time if
+-        one is found. If this option is not selected, DMAR support can
+-        be enabled by passing intel_iommu=on to the kernel. It is
+-        recommended you say N here while the DMAR code remains
+-        experimental.
+-
+ endmenu
+ endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/kernel/iosapic.c linux-2.6.29-rc3.owrt/arch/ia64/kernel/iosapic.c
+--- linux-2.6.29.owrt/arch/ia64/kernel/iosapic.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/kernel/iosapic.c   2009-05-10 23:48:28.000000000 +0200
+@@ -507,7 +507,7 @@
+       if (trigger == IOSAPIC_EDGE)
+               return -EINVAL;
+-      for (i = 0; i < NR_IRQS; i++) {
++      for (i = 0; i <= NR_IRQS; i++) {
+               info = &iosapic_intr_info[i];
+               if (info->trigger == trigger && info->polarity == pol &&
+                   (info->dmode == IOSAPIC_FIXED ||
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/kernel/smpboot.c linux-2.6.29-rc3.owrt/arch/ia64/kernel/smpboot.c
+--- linux-2.6.29.owrt/arch/ia64/kernel/smpboot.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/kernel/smpboot.c   2009-05-10 23:48:28.000000000 +0200
+@@ -736,15 +736,14 @@
+                       return -EBUSY;
+       }
+-      cpu_clear(cpu, cpu_online_map);
+-
+       if (migrate_platform_irqs(cpu)) {
+               cpu_set(cpu, cpu_online_map);
+-              return -EBUSY;
++              return (-EBUSY);
+       }
+       remove_siblinginfo(cpu);
+       fixup_irqs();
++      cpu_clear(cpu, cpu_online_map);
+       local_flush_tlb_all();
+       cpu_clear(cpu, cpu_callin_map);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/kernel/unwind.c linux-2.6.29-rc3.owrt/arch/ia64/kernel/unwind.c
+--- linux-2.6.29.owrt/arch/ia64/kernel/unwind.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/kernel/unwind.c    2009-05-10 23:48:28.000000000 +0200
+@@ -2149,7 +2149,7 @@
+       /* next, remove hash table entries for this table */
+-      for (index = 0; index < UNW_HASH_SIZE; ++index) {
++      for (index = 0; index <= UNW_HASH_SIZE; ++index) {
+               tmp = unw.cache + unw.hash[index];
+               if (unw.hash[index] >= UNW_CACHE_SIZE
+                   || tmp->ip < table->start || tmp->ip >= table->end)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/kvm/kvm-ia64.c linux-2.6.29-rc3.owrt/arch/ia64/kvm/kvm-ia64.c
+--- linux-2.6.29.owrt/arch/ia64/kvm/kvm-ia64.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/kvm/kvm-ia64.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1337,10 +1337,6 @@
+       }
+ }
+-void kvm_arch_sync_events(struct kvm *kvm)
+-{
+-}
+-
+ void kvm_arch_destroy_vm(struct kvm *kvm)
+ {
+       kvm_iommu_unmap_guest(kvm);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/kvm/process.c linux-2.6.29-rc3.owrt/arch/ia64/kvm/process.c
+--- linux-2.6.29.owrt/arch/ia64/kvm/process.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/kvm/process.c      2009-05-10 23:48:28.000000000 +0200
+@@ -455,18 +455,13 @@
+       if (!vmm_fpswa_interface)
+               return (fpswa_ret_t) {-1, 0, 0, 0};
+-      memset(&fp_state, 0, sizeof(fp_state_t));
+-
+       /*
+-       * compute fp_state.  only FP registers f6 - f11 are used by the
+-       * vmm, so set those bits in the mask and set the low volatile
+-       * pointer to point to these registers.
++       * Just let fpswa driver to use hardware fp registers.
++       * No fp register is valid in memory.
+        */
+-      fp_state.bitmask_low64 = 0xfc0;  /* bit6..bit11 */
+-
+-      fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
++      memset(&fp_state, 0, sizeof(fp_state_t));
+-   /*
++      /*
+        * unsigned long (*EFI_FPSWA) (
+        *      unsigned long    trap_type,
+        *      void             *Bundle,
+@@ -550,6 +545,10 @@
+               status = vmm_handle_fpu_swa(0, regs, isr);
+               if (!status)
+                       return ;
++              else if (-EAGAIN == status) {
++                      vcpu_decrement_iip(vcpu);
++                      return ;
++              }
+               break;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/mm/numa.c linux-2.6.29-rc3.owrt/arch/ia64/mm/numa.c
+--- linux-2.6.29.owrt/arch/ia64/mm/numa.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/mm/numa.c  2009-05-10 23:48:28.000000000 +0200
+@@ -58,7 +58,7 @@
+  * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+  * the section resides.
+  */
+-int __meminit __early_pfn_to_nid(unsigned long pfn)
++int early_pfn_to_nid(unsigned long pfn)
+ {
+       int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+@@ -70,7 +70,7 @@
+                       return node_memblk[i].nid;
+       }
+-      return -1;
++      return 0;
+ }
+ #ifdef CONFIG_MEMORY_HOTPLUG
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/sn/kernel/bte.c linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/bte.c
+--- linux-2.6.29.owrt/arch/ia64/sn/kernel/bte.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/bte.c    2009-05-10 23:48:28.000000000 +0200
+@@ -97,10 +97,9 @@
+               return BTE_SUCCESS;
+       }
+-      BUG_ON(len & L1_CACHE_MASK);
+-      BUG_ON(src & L1_CACHE_MASK);
+-      BUG_ON(dest & L1_CACHE_MASK);
+-      BUG_ON(len > BTE_MAX_XFER);
++      BUG_ON((len & L1_CACHE_MASK) ||
++               (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
++      BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
+       /*
+        * Start with interface corresponding to cpu number
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/sn/kernel/io_acpi_init.c linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/io_acpi_init.c
+--- linux-2.6.29.owrt/arch/ia64/sn/kernel/io_acpi_init.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/io_acpi_init.c   2009-05-10 23:48:28.000000000 +0200
+@@ -443,7 +443,7 @@
+               size = pci_resource_len(dev, PCI_ROM_RESOURCE);
+               addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
+                              size);
+-              image_size = pci_get_rom_size(dev, addr, size);
++              image_size = pci_get_rom_size(addr, size);
+               dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
+               dev->resource[PCI_ROM_RESOURCE].end =
+                                       (unsigned long) addr + image_size - 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/sn/kernel/io_init.c linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/io_init.c
+--- linux-2.6.29.owrt/arch/ia64/sn/kernel/io_init.c    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/sn/kernel/io_init.c        2009-05-10 23:48:28.000000000 +0200
+@@ -269,7 +269,7 @@
+                       rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
+                                     size + 1);
+-                      image_size = pci_get_rom_size(dev, rom, size + 1);
++                      image_size = pci_get_rom_size(rom, size + 1);
+                       dev->resource[PCI_ROM_RESOURCE].end =
+                               dev->resource[PCI_ROM_RESOURCE].start +
+                               image_size - 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/sn/pci/pcibr/pcibr_dma.c linux-2.6.29-rc3.owrt/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+--- linux-2.6.29.owrt/arch/ia64/sn/pci/pcibr/pcibr_dma.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/sn/pci/pcibr/pcibr_dma.c   2009-05-10 23:48:28.000000000 +0200
+@@ -135,10 +135,11 @@
+       if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
+               pci_addr = IS_PIC_SOFT(pcibus_info) ?
+                               PHYS_TO_DMA(paddr) :
+-                              PHYS_TO_TIODMA(paddr);
++                              PHYS_TO_TIODMA(paddr) | dma_attributes;
+       else
+-              pci_addr = paddr;
+-      pci_addr |= dma_attributes;
++              pci_addr = IS_PIC_SOFT(pcibus_info) ?
++                              paddr :
++                              paddr | dma_attributes;
+       /* Handle Bus mode */
+       if (IS_PCIX(pcibus_info))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/xen/Kconfig linux-2.6.29-rc3.owrt/arch/ia64/xen/Kconfig
+--- linux-2.6.29.owrt/arch/ia64/xen/Kconfig    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/xen/Kconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -8,7 +8,8 @@
+       depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
+       select XEN_XENCOMM
+       select NO_IDLE_HZ
+-      # followings are required to save/restore.
++
++      # those are required to save/restore.
+       select ARCH_SUSPEND_POSSIBLE
+       select SUSPEND
+       select PM_SLEEP
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/ia64/xen/xen_pv_ops.c linux-2.6.29-rc3.owrt/arch/ia64/xen/xen_pv_ops.c
+--- linux-2.6.29.owrt/arch/ia64/xen/xen_pv_ops.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/ia64/xen/xen_pv_ops.c   2009-05-10 23:48:28.000000000 +0200
+@@ -153,7 +153,7 @@
+       xen_setup_vcpu_info_placement();
+ }
+-static const struct pv_init_ops xen_init_ops __initconst = {
++static const struct pv_init_ops xen_init_ops __initdata = {
+       .banner = xen_banner,
+       .reserve_memory = xen_reserve_memory,
+@@ -337,7 +337,7 @@
+       HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
+ }
+-static const struct pv_iosapic_ops xen_iosapic_ops __initconst = {
++static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+       .pcat_compat_init = xen_pcat_compat_init,
+       .__get_irq_chip = xen_iosapic_get_irq_chip,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/atari/ataints.c linux-2.6.29-rc3.owrt/arch/m68k/atari/ataints.c
+--- linux-2.6.29.owrt/arch/m68k/atari/ataints.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/atari/ataints.c    2009-05-10 23:48:28.000000000 +0200
+@@ -187,8 +187,8 @@
+ "     jbra    ret_from_interrupt\n"                                      \
+        : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),       \
+            "n" (PT_OFF_SR), "n" (n),                                     \
+-           "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
+-                      : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
++           "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a)      \
++                      : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)),    \
+            "m" (preempt_count()), "di" (HARDIRQ_OFFSET)                  \
+ );                                                                       \
+       for (;;);                       /* fake noreturn */                \
+@@ -366,14 +366,14 @@
+       /* Initialize the MFP(s) */
+ #ifdef ATARI_USE_SOFTWARE_EOI
+-      st_mfp.vec_adr  = 0x48; /* Software EOI-Mode */
++      mfp.vec_adr  = 0x48;    /* Software EOI-Mode */
+ #else
+-      st_mfp.vec_adr  = 0x40; /* Automatic EOI-Mode */
++      mfp.vec_adr  = 0x40;    /* Automatic EOI-Mode */
+ #endif
+-      st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
+-      st_mfp.int_en_b = 0x00;
+-      st_mfp.int_mk_a = 0xff; /* no Masking */
+-      st_mfp.int_mk_b = 0xff;
++      mfp.int_en_a = 0x00;    /* turn off MFP-Ints */
++      mfp.int_en_b = 0x00;
++      mfp.int_mk_a = 0xff;    /* no Masking */
++      mfp.int_mk_b = 0xff;
+       if (ATARIHW_PRESENT(TT_MFP)) {
+ #ifdef ATARI_USE_SOFTWARE_EOI
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/atari/atakeyb.c linux-2.6.29-rc3.owrt/arch/m68k/atari/atakeyb.c
+--- linux-2.6.29.owrt/arch/m68k/atari/atakeyb.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/atari/atakeyb.c    2009-05-10 23:48:28.000000000 +0200
+@@ -609,10 +609,10 @@
+                                ACIA_RHTID : 0);
+       /* make sure the interrupt line is up */
+-      } while ((st_mfp.par_dt_reg & 0x10) == 0);
++      } while ((mfp.par_dt_reg & 0x10) == 0);
+       /* enable ACIA Interrupts */
+-      st_mfp.active_edge &= ~0x10;
++      mfp.active_edge &= ~0x10;
+       atari_turnon_irq(IRQ_MFP_ACIA);
+       ikbd_self_test = 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/atari/config.c linux-2.6.29-rc3.owrt/arch/m68k/atari/config.c
+--- linux-2.6.29.owrt/arch/m68k/atari/config.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/atari/config.c     2009-05-10 23:48:28.000000000 +0200
+@@ -258,7 +258,7 @@
+                       printk("STND_SHIFTER ");
+               }
+       }
+-      if (hwreg_present(&st_mfp.par_dt_reg)) {
++      if (hwreg_present(&mfp.par_dt_reg)) {
+               ATARIHW_SET(ST_MFP);
+               printk("ST_MFP ");
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/atari/debug.c linux-2.6.29-rc3.owrt/arch/m68k/atari/debug.c
+--- linux-2.6.29.owrt/arch/m68k/atari/debug.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/atari/debug.c      2009-05-10 23:48:28.000000000 +0200
+@@ -34,9 +34,9 @@
+ static inline void ata_mfp_out(char c)
+ {
+-      while (!(st_mfp.trn_stat & 0x80))       /* wait for tx buf empty */
++      while (!(mfp.trn_stat & 0x80))  /* wait for tx buf empty */
+               barrier();
+-      st_mfp.usart_dta = c;
++      mfp.usart_dta = c;
+ }
+ static void atari_mfp_console_write(struct console *co, const char *str,
+@@ -91,7 +91,7 @@
+       /* This a some-seconds timeout in case no printer is connected */
+       unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+-      while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
++      while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+               ;
+       if (!i)
+               return 0;
+@@ -131,9 +131,9 @@
+ #if 0
+ int atari_mfp_console_wait_key(struct console *co)
+ {
+-      while (!(st_mfp.rcv_stat & 0x80))       /* wait for rx buf filled */
++      while (!(mfp.rcv_stat & 0x80))  /* wait for rx buf filled */
+               barrier();
+-      return st_mfp.usart_dta;
++      return mfp.usart_dta;
+ }
+ int atari_scc_console_wait_key(struct console *co)
+@@ -175,12 +175,12 @@
+               baud = B9600;           /* use default 9600bps for non-implemented rates */
+       baud -= B1200;                  /* baud_table[] starts at 1200bps */
+-      st_mfp.trn_stat &= ~0x01;       /* disable TX */
+-      st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+-      st_mfp.tim_ct_cd &= 0x70;       /* stop timer D */
+-      st_mfp.tim_dt_d = baud_table[baud];
+-      st_mfp.tim_ct_cd |= 0x01;       /* start timer D, 1:4 */
+-      st_mfp.trn_stat |= 0x01;        /* enable TX */
++      mfp.trn_stat &= ~0x01;          /* disable TX */
++      mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
++      mfp.tim_ct_cd &= 0x70;          /* stop timer D */
++      mfp.tim_dt_d = baud_table[baud];
++      mfp.tim_ct_cd |= 0x01;          /* start timer D, 1:4 */
++      mfp.trn_stat |= 0x01;           /* enable TX */
+ }
+ #define SCC_WRITE(reg, val)                           \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/atari/time.c linux-2.6.29-rc3.owrt/arch/m68k/atari/time.c
+--- linux-2.6.29.owrt/arch/m68k/atari/time.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/atari/time.c       2009-05-10 23:48:28.000000000 +0200
+@@ -27,9 +27,9 @@
+ atari_sched_init(irq_handler_t timer_routine)
+ {
+     /* set Timer C data Register */
+-    st_mfp.tim_dt_c = INT_TICKS;
++    mfp.tim_dt_c = INT_TICKS;
+     /* start timer C, div = 1:100 */
+-    st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
++    mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
+     /* install interrupt service routine for MFP Timer C */
+     if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
+                   "timer", timer_routine))
+@@ -46,11 +46,11 @@
+   unsigned long ticks, offset = 0;
+   /* read MFP timer C current value */
+-  ticks = st_mfp.tim_dt_c;
++  ticks = mfp.tim_dt_c;
+   /* The probability of underflow is less than 2% */
+   if (ticks > INT_TICKS - INT_TICKS / 50)
+     /* Check for pending timer interrupt */
+-    if (st_mfp.int_pn_b & (1 << 5))
++    if (mfp.int_pn_b & (1 << 5))
+       offset = TICK_SIZE;
+   ticks = INT_TICKS - ticks;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/atarihw.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/atarihw.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/atarihw.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/atarihw.h      2009-05-10 23:48:28.000000000 +0200
+@@ -113,7 +113,7 @@
+  * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
+  */
+ #define       MFPDELAY() \
+-      __asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" );
++      __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+ /* Do cache push/invalidate for DMA read/write. This function obeys the
+  * snooping on some machines (Medusa) and processors: The Medusa itself can
+@@ -565,7 +565,7 @@
+   u_char char_dummy23;
+   u_char usart_dta;
+  };
+-# define st_mfp ((*(volatile struct MFP*)MFP_BAS))
++# define mfp ((*(volatile struct MFP*)MFP_BAS))
+ /* TT's second MFP */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/atariints.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/atariints.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/atariints.h        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/atariints.h    2009-05-10 23:48:28.000000000 +0200
+@@ -113,7 +113,7 @@
+ {     unsigned char   mask, *reg;
+       mask = 1 << (irq & 7);
+-      reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
++      reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                 ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+       return( *reg & mask );
+ }
+@@ -123,7 +123,7 @@
+ {     unsigned char   mask, *reg;
+       mask = 1 << (irq & 7);
+-      reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
++      reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                 ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+       __asm__ __volatile__ ( "orb %0,%1"
+                             : : "di" (mask), "m" (*reg) : "memory" );
+@@ -134,7 +134,7 @@
+ {     unsigned char   mask, *reg;
+       mask = ~(1 << (irq & 7));
+-      reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
++      reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                 ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+       if (type == MFP_PENDING || type == MFP_SERVICE)
+               __asm__ __volatile__ ( "moveb %0,%1"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/param.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/param.h    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param.h        2009-05-10 23:48:28.000000000 +0200
+@@ -1,26 +1,5 @@
+-#ifndef _M68K_PARAM_H
+-#define _M68K_PARAM_H
+-
+-#ifdef __KERNEL__
+-# define HZ           CONFIG_HZ       /* Internal kernel timer frequency */
+-# define USER_HZ      100             /* .. some user interfaces are in "ticks" */
+-# define CLOCKS_PER_SEC       (USER_HZ)       /* like times() */
+-#endif
+-
+-#ifndef HZ
+-#define HZ 100
+-#endif
+-
+ #ifdef __uClinux__
+-#define EXEC_PAGESIZE 4096
++#include "param_no.h"
+ #else
+-#define EXEC_PAGESIZE 8192
+-#endif
+-
+-#ifndef NOGROUP
+-#define NOGROUP               (-1)
++#include "param_mm.h"
+ #endif
+-
+-#define MAXHOSTNAMELEN        64      /* max length of hostname */
+-
+-#endif /* _M68K_PARAM_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/param_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/param_mm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param_mm.h     2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,22 @@
++#ifndef _M68K_PARAM_H
++#define _M68K_PARAM_H
++
++#ifdef __KERNEL__
++# define HZ           CONFIG_HZ       /* Internal kernel timer frequency */
++# define USER_HZ      100             /* .. some user interfaces are in "ticks" */
++# define CLOCKS_PER_SEC       (USER_HZ)       /* like times() */
++#endif
++
++#ifndef HZ
++#define HZ 100
++#endif
++
++#define EXEC_PAGESIZE 8192
++
++#ifndef NOGROUP
++#define NOGROUP               (-1)
++#endif
++
++#define MAXHOSTNAMELEN        64      /* max length of hostname */
++
++#endif /* _M68K_PARAM_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/param_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/param_no.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/param_no.h     2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,22 @@
++#ifndef _M68KNOMMU_PARAM_H
++#define _M68KNOMMU_PARAM_H
++
++#ifdef __KERNEL__
++#define HZ CONFIG_HZ
++#define       USER_HZ         HZ
++#define       CLOCKS_PER_SEC  (USER_HZ)
++#endif
++
++#ifndef HZ
++#define HZ    100
++#endif
++
++#define EXEC_PAGESIZE 4096
++
++#ifndef NOGROUP
++#define NOGROUP               (-1)
++#endif
++
++#define MAXHOSTNAMELEN        64      /* max length of hostname */
++
++#endif /* _M68KNOMMU_PARAM_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/ptrace.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/ptrace.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace.h       2009-05-10 23:48:28.000000000 +0200
+@@ -1,87 +1,5 @@
+-#ifndef _M68K_PTRACE_H
+-#define _M68K_PTRACE_H
+-
+-#define PT_D1    0
+-#define PT_D2    1
+-#define PT_D3    2
+-#define PT_D4    3
+-#define PT_D5    4
+-#define PT_D6    5
+-#define PT_D7    6
+-#define PT_A0    7
+-#define PT_A1    8
+-#define PT_A2    9
+-#define PT_A3    10
+-#define PT_A4    11
+-#define PT_A5    12
+-#define PT_A6    13
+-#define PT_D0    14
+-#define PT_USP           15
+-#define PT_ORIG_D0 16
+-#define PT_SR    17
+-#define PT_PC    18
+-
+-#ifndef __ASSEMBLY__
+-
+-/* this struct defines the way the registers are stored on the
+-   stack during a system call. */
+-
+-struct pt_regs {
+-  long     d1;
+-  long     d2;
+-  long     d3;
+-  long     d4;
+-  long     d5;
+-  long     a0;
+-  long     a1;
+-  long     a2;
+-  long     d0;
+-  long     orig_d0;
+-  long     stkadj;
+-#ifdef CONFIG_COLDFIRE
+-  unsigned format :  4; /* frame format specifier */
+-  unsigned vector : 12; /* vector offset */
+-  unsigned short sr;
+-  unsigned long  pc;
++#ifdef __uClinux__
++#include "ptrace_no.h"
+ #else
+-  unsigned short sr;
+-  unsigned long  pc;
+-  unsigned format :  4; /* frame format specifier */
+-  unsigned vector : 12; /* vector offset */
++#include "ptrace_mm.h"
+ #endif
+-};
+-
+-/*
+- * This is the extended stack used by signal handlers and the context
+- * switcher: it's pushed after the normal "struct pt_regs".
+- */
+-struct switch_stack {
+-      unsigned long  d6;
+-      unsigned long  d7;
+-      unsigned long  a3;
+-      unsigned long  a4;
+-      unsigned long  a5;
+-      unsigned long  a6;
+-      unsigned long  retpc;
+-};
+-
+-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+-#define PTRACE_GETREGS            12
+-#define PTRACE_SETREGS            13
+-#define PTRACE_GETFPREGS          14
+-#define PTRACE_SETFPREGS          15
+-
+-#ifdef __KERNEL__
+-
+-#ifndef PS_S
+-#define PS_S  (0x2000)
+-#define PS_M  (0x1000)
+-#endif
+-
+-#define user_mode(regs) (!((regs)->sr & PS_S))
+-#define instruction_pointer(regs) ((regs)->pc)
+-#define profile_pc(regs) instruction_pointer(regs)
+-extern void show_regs(struct pt_regs *);
+-#endif /* __KERNEL__ */
+-#endif /* __ASSEMBLY__ */
+-#endif /* _M68K_PTRACE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/ptrace_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/ptrace_mm.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace_mm.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,80 @@
++#ifndef _M68K_PTRACE_H
++#define _M68K_PTRACE_H
++
++#define PT_D1    0
++#define PT_D2    1
++#define PT_D3    2
++#define PT_D4    3
++#define PT_D5    4
++#define PT_D6    5
++#define PT_D7    6
++#define PT_A0    7
++#define PT_A1    8
++#define PT_A2    9
++#define PT_A3    10
++#define PT_A4    11
++#define PT_A5    12
++#define PT_A6    13
++#define PT_D0    14
++#define PT_USP           15
++#define PT_ORIG_D0 16
++#define PT_SR    17
++#define PT_PC    18
++
++#ifndef __ASSEMBLY__
++
++/* this struct defines the way the registers are stored on the
++   stack during a system call. */
++
++struct pt_regs {
++  long     d1;
++  long     d2;
++  long     d3;
++  long     d4;
++  long     d5;
++  long     a0;
++  long     a1;
++  long     a2;
++  long     d0;
++  long     orig_d0;
++  long     stkadj;
++  unsigned short sr;
++  unsigned long  pc;
++  unsigned format :  4; /* frame format specifier */
++  unsigned vector : 12; /* vector offset */
++};
++
++/*
++ * This is the extended stack used by signal handlers and the context
++ * switcher: it's pushed after the normal "struct pt_regs".
++ */
++struct switch_stack {
++      unsigned long  d6;
++      unsigned long  d7;
++      unsigned long  a3;
++      unsigned long  a4;
++      unsigned long  a5;
++      unsigned long  a6;
++      unsigned long  retpc;
++};
++
++/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
++#define PTRACE_GETREGS            12
++#define PTRACE_SETREGS            13
++#define PTRACE_GETFPREGS          14
++#define PTRACE_SETFPREGS          15
++
++#ifdef __KERNEL__
++
++#ifndef PS_S
++#define PS_S  (0x2000)
++#define PS_M  (0x1000)
++#endif
++
++#define user_mode(regs) (!((regs)->sr & PS_S))
++#define instruction_pointer(regs) ((regs)->pc)
++#define profile_pc(regs) instruction_pointer(regs)
++extern void show_regs(struct pt_regs *);
++#endif /* __KERNEL__ */
++#endif /* __ASSEMBLY__ */
++#endif /* _M68K_PTRACE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/ptrace_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/ptrace_no.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/ptrace_no.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,87 @@
++#ifndef _M68K_PTRACE_H
++#define _M68K_PTRACE_H
++
++#define PT_D1    0
++#define PT_D2    1
++#define PT_D3    2
++#define PT_D4    3
++#define PT_D5    4
++#define PT_D6    5
++#define PT_D7    6
++#define PT_A0    7
++#define PT_A1    8
++#define PT_A2    9
++#define PT_A3    10
++#define PT_A4    11
++#define PT_A5    12
++#define PT_A6    13
++#define PT_D0    14
++#define PT_USP           15
++#define PT_ORIG_D0 16
++#define PT_SR    17
++#define PT_PC    18
++
++#ifndef __ASSEMBLY__
++
++/* this struct defines the way the registers are stored on the
++   stack during a system call. */
++
++struct pt_regs {
++  long     d1;
++  long     d2;
++  long     d3;
++  long     d4;
++  long     d5;
++  long     a0;
++  long     a1;
++  long     a2;
++  long     d0;
++  long     orig_d0;
++  long     stkadj;
++#ifdef CONFIG_COLDFIRE
++  unsigned format :  4; /* frame format specifier */
++  unsigned vector : 12; /* vector offset */
++  unsigned short sr;
++  unsigned long  pc;
++#else
++  unsigned short sr;
++  unsigned long  pc;
++  unsigned format :  4; /* frame format specifier */
++  unsigned vector : 12; /* vector offset */
++#endif
++};
++
++/*
++ * This is the extended stack used by signal handlers and the context
++ * switcher: it's pushed after the normal "struct pt_regs".
++ */
++struct switch_stack {
++      unsigned long  d6;
++      unsigned long  d7;
++      unsigned long  a3;
++      unsigned long  a4;
++      unsigned long  a5;
++      unsigned long  a6;
++      unsigned long  retpc;
++};
++
++/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
++#define PTRACE_GETREGS            12
++#define PTRACE_SETREGS            13
++#define PTRACE_GETFPREGS          14
++#define PTRACE_SETFPREGS          15
++
++#ifdef __KERNEL__
++
++#ifndef PS_S
++#define PS_S  (0x2000)
++#define PS_M  (0x1000)
++#endif
++
++#define user_mode(regs) (!((regs)->sr & PS_S))
++#define instruction_pointer(regs) ((regs)->pc)
++#define profile_pc(regs) instruction_pointer(regs)
++extern void show_regs(struct pt_regs *);
++#endif /* __KERNEL__ */
++#endif /* __ASSEMBLY__ */
++#endif /* _M68K_PTRACE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/setup.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/setup.h    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup.h        2009-05-10 23:48:28.000000000 +0200
+@@ -1,376 +1,5 @@
+-/*
+-** asm/setup.h -- Definition of the Linux/m68k setup information
+-**
+-** Copyright 1992 by Greg Harp
+-**
+-** This file is subject to the terms and conditions of the GNU General Public
+-** License.  See the file COPYING in the main directory of this archive
+-** for more details.
+-**
+-** Created 09/29/92 by Greg Harp
+-**
+-** 5/2/94 Roman Hodek:
+-**   Added bi_atari part of the machine dependent union bi_un; for now it
+-**   contains just a model field to distinguish between TT and Falcon.
+-** 26/7/96 Roman Zippel:
+-**   Renamed to setup.h; added some useful macros to allow gcc some
+-**   optimizations if possible.
+-** 5/10/96 Geert Uytterhoeven:
+-**   Redesign of the boot information structure; moved boot information
+-**   structure to bootinfo.h
+-*/
+-
+-#ifndef _M68K_SETUP_H
+-#define _M68K_SETUP_H
+-
+-
+-
+-    /*
+-     *  Linux/m68k Architectures
+-     */
+-
+-#define MACH_AMIGA    1
+-#define MACH_ATARI    2
+-#define MACH_MAC      3
+-#define MACH_APOLLO   4
+-#define MACH_SUN3     5
+-#define MACH_MVME147  6
+-#define MACH_MVME16x  7
+-#define MACH_BVME6000 8
+-#define MACH_HP300    9
+-#define MACH_Q40     10
+-#define MACH_SUN3X   11
+-
+-#define COMMAND_LINE_SIZE 256
+-
+-#ifdef __KERNEL__
+-
+-#define CL_SIZE COMMAND_LINE_SIZE
+-
+-#ifndef __ASSEMBLY__
+-extern unsigned long m68k_machtype;
+-#endif /* !__ASSEMBLY__ */
+-
+-#if !defined(CONFIG_AMIGA)
+-#  define MACH_IS_AMIGA (0)
+-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+-      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
++#ifdef __uClinux__
++#include "setup_no.h"
+ #else
+-#  define MACH_AMIGA_ONLY
+-#  define MACH_IS_AMIGA (1)
+-#  define MACH_TYPE (MACH_AMIGA)
++#include "setup_mm.h"
+ #endif
+-
+-#if !defined(CONFIG_ATARI)
+-#  define MACH_IS_ATARI (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+-      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+-#else
+-#  define MACH_ATARI_ONLY
+-#  define MACH_IS_ATARI (1)
+-#  define MACH_TYPE (MACH_ATARI)
+-#endif
+-
+-#if !defined(CONFIG_MAC)
+-#  define MACH_IS_MAC (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+-      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+-#else
+-#  define MACH_MAC_ONLY
+-#  define MACH_IS_MAC (1)
+-#  define MACH_TYPE (MACH_MAC)
+-#endif
+-
+-#if defined(CONFIG_SUN3)
+-#define MACH_IS_SUN3 (1)
+-#define MACH_SUN3_ONLY (1)
+-#define MACH_TYPE (MACH_SUN3)
+-#else
+-#define MACH_IS_SUN3 (0)
+-#endif
+-
+-#if !defined (CONFIG_APOLLO)
+-#  define MACH_IS_APOLLO (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+-#else
+-#  define MACH_APOLLO_ONLY
+-#  define MACH_IS_APOLLO (1)
+-#  define MACH_TYPE (MACH_APOLLO)
+-#endif
+-
+-#if !defined (CONFIG_MVME147)
+-#  define MACH_IS_MVME147 (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+-#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+-#else
+-#  define MACH_MVME147_ONLY
+-#  define MACH_IS_MVME147 (1)
+-#  define MACH_TYPE (MACH_MVME147)
+-#endif
+-
+-#if !defined (CONFIG_MVME16x)
+-#  define MACH_IS_MVME16x (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+-#else
+-#  define MACH_MVME16x_ONLY
+-#  define MACH_IS_MVME16x (1)
+-#  define MACH_TYPE (MACH_MVME16x)
+-#endif
+-
+-#if !defined (CONFIG_BVME6000)
+-#  define MACH_IS_BVME6000 (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+-      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+-#else
+-#  define MACH_BVME6000_ONLY
+-#  define MACH_IS_BVME6000 (1)
+-#  define MACH_TYPE (MACH_BVME6000)
+-#endif
+-
+-#if !defined (CONFIG_HP300)
+-#  define MACH_IS_HP300 (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+-      || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+-#else
+-#  define MACH_HP300_ONLY
+-#  define MACH_IS_HP300 (1)
+-#  define MACH_TYPE (MACH_HP300)
+-#endif
+-
+-#if !defined (CONFIG_Q40)
+-#  define MACH_IS_Q40 (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+-      || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+-      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+-#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+-#else
+-#  define MACH_Q40_ONLY
+-#  define MACH_IS_Q40 (1)
+-#  define MACH_TYPE (MACH_Q40)
+-#endif
+-
+-#if !defined (CONFIG_SUN3X)
+-#  define MACH_IS_SUN3X (0)
+-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+-      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+-      || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+-      || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+-#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+-#else
+-#  define CONFIG_SUN3X_ONLY
+-#  define MACH_IS_SUN3X (1)
+-#  define MACH_TYPE (MACH_SUN3X)
+-#endif
+-
+-#ifndef MACH_TYPE
+-#  define MACH_TYPE (m68k_machtype)
+-#endif
+-
+-#endif /* __KERNEL__ */
+-
+-
+-    /*
+-     *  CPU, FPU and MMU types
+-     *
+-     *  Note: we may rely on the following equalities:
+-     *
+-     *      CPU_68020 == MMU_68851
+-     *      CPU_68030 == MMU_68030
+-     *      CPU_68040 == FPU_68040 == MMU_68040
+-     *      CPU_68060 == FPU_68060 == MMU_68060
+-     */
+-
+-#define CPUB_68020     0
+-#define CPUB_68030     1
+-#define CPUB_68040     2
+-#define CPUB_68060     3
+-
+-#define CPU_68020      (1<<CPUB_68020)
+-#define CPU_68030      (1<<CPUB_68030)
+-#define CPU_68040      (1<<CPUB_68040)
+-#define CPU_68060      (1<<CPUB_68060)
+-
+-#define FPUB_68881     0
+-#define FPUB_68882     1
+-#define FPUB_68040     2                       /* Internal FPU */
+-#define FPUB_68060     3                       /* Internal FPU */
+-#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
+-
+-#define FPU_68881      (1<<FPUB_68881)
+-#define FPU_68882      (1<<FPUB_68882)
+-#define FPU_68040      (1<<FPUB_68040)
+-#define FPU_68060      (1<<FPUB_68060)
+-#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+-
+-#define MMUB_68851     0
+-#define MMUB_68030     1                       /* Internal MMU */
+-#define MMUB_68040     2                       /* Internal MMU */
+-#define MMUB_68060     3                       /* Internal MMU */
+-#define MMUB_APOLLO    4                       /* Custom Apollo */
+-#define MMUB_SUN3      5                       /* Custom Sun-3 */
+-
+-#define MMU_68851      (1<<MMUB_68851)
+-#define MMU_68030      (1<<MMUB_68030)
+-#define MMU_68040      (1<<MMUB_68040)
+-#define MMU_68060      (1<<MMUB_68060)
+-#define MMU_SUN3       (1<<MMUB_SUN3)
+-#define MMU_APOLLO     (1<<MMUB_APOLLO)
+-
+-#ifdef __KERNEL__
+-
+-#ifndef __ASSEMBLY__
+-extern unsigned long m68k_cputype;
+-extern unsigned long m68k_fputype;
+-extern unsigned long m68k_mmutype;
+-#ifdef CONFIG_VME
+-extern unsigned long vme_brdtype;
+-#endif
+-
+-    /*
+-     *  m68k_is040or060 is != 0 for a '040 or higher;
+-     *  used numbers are 4 for 68040 and 6 for 68060.
+-     */
+-
+-extern int m68k_is040or060;
+-#endif /* !__ASSEMBLY__ */
+-
+-#if !defined(CONFIG_M68020)
+-#  define CPU_IS_020 (0)
+-#  define MMU_IS_851 (0)
+-#  define MMU_IS_SUN3 (0)
+-#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+-#  define CPU_IS_020 (m68k_cputype & CPU_68020)
+-#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
+-#  define MMU_IS_SUN3 (0)     /* Sun3 not supported with other CPU enabled */
+-#else
+-#  define CPU_M68020_ONLY
+-#  define CPU_IS_020 (1)
+-#ifdef MACH_SUN3_ONLY
+-#  define MMU_IS_SUN3 (1)
+-#  define MMU_IS_851 (0)
+-#else
+-#  define MMU_IS_SUN3 (0)
+-#  define MMU_IS_851 (1)
+-#endif
+-#endif
+-
+-#if !defined(CONFIG_M68030)
+-#  define CPU_IS_030 (0)
+-#  define MMU_IS_030 (0)
+-#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+-#  define CPU_IS_030 (m68k_cputype & CPU_68030)
+-#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
+-#else
+-#  define CPU_M68030_ONLY
+-#  define CPU_IS_030 (1)
+-#  define MMU_IS_030 (1)
+-#endif
+-
+-#if !defined(CONFIG_M68040)
+-#  define CPU_IS_040 (0)
+-#  define MMU_IS_040 (0)
+-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+-#  define CPU_IS_040 (m68k_cputype & CPU_68040)
+-#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
+-#else
+-#  define CPU_M68040_ONLY
+-#  define CPU_IS_040 (1)
+-#  define MMU_IS_040 (1)
+-#endif
+-
+-#if !defined(CONFIG_M68060)
+-#  define CPU_IS_060 (0)
+-#  define MMU_IS_060 (0)
+-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+-#  define CPU_IS_060 (m68k_cputype & CPU_68060)
+-#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
+-#else
+-#  define CPU_M68060_ONLY
+-#  define CPU_IS_060 (1)
+-#  define MMU_IS_060 (1)
+-#endif
+-
+-#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+-#  define CPU_IS_020_OR_030 (0)
+-#else
+-#  define CPU_M68020_OR_M68030
+-#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+-#    define CPU_IS_020_OR_030 (!m68k_is040or060)
+-#  else
+-#    define CPU_M68020_OR_M68030_ONLY
+-#    define CPU_IS_020_OR_030 (1)
+-#  endif
+-#endif
+-
+-#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+-#  define CPU_IS_040_OR_060 (0)
+-#else
+-#  define CPU_M68040_OR_M68060
+-#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+-#    define CPU_IS_040_OR_060 (m68k_is040or060)
+-#  else
+-#    define CPU_M68040_OR_M68060_ONLY
+-#    define CPU_IS_040_OR_060 (1)
+-#  endif
+-#endif
+-
+-#define CPU_TYPE (m68k_cputype)
+-
+-#ifdef CONFIG_M68KFPU_EMU
+-#  ifdef CONFIG_M68KFPU_EMU_ONLY
+-#    define FPU_IS_EMU (1)
+-#  else
+-#    define FPU_IS_EMU (!m68k_fputype)
+-#  endif
+-#else
+-#  define FPU_IS_EMU (0)
+-#endif
+-
+-
+-    /*
+-     *  Miscellaneous
+-     */
+-
+-#define NUM_MEMINFO   4
+-
+-#ifndef __ASSEMBLY__
+-struct mem_info {
+-      unsigned long addr;             /* physical address of memory chunk */
+-      unsigned long size;             /* length of memory chunk (in bytes) */
+-};
+-
+-extern int m68k_num_memory;           /* # of memory blocks found (and used) */
+-extern int m68k_realnum_memory;               /* real # of memory blocks found */
+-extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+-#endif
+-
+-#endif /* __KERNEL__ */
+-
+-#endif /* _M68K_SETUP_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/setup_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/setup_mm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup_mm.h     2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,376 @@
++/*
++** asm/setup.h -- Definition of the Linux/m68k setup information
++**
++** Copyright 1992 by Greg Harp
++**
++** This file is subject to the terms and conditions of the GNU General Public
++** License.  See the file COPYING in the main directory of this archive
++** for more details.
++**
++** Created 09/29/92 by Greg Harp
++**
++** 5/2/94 Roman Hodek:
++**   Added bi_atari part of the machine dependent union bi_un; for now it
++**   contains just a model field to distinguish between TT and Falcon.
++** 26/7/96 Roman Zippel:
++**   Renamed to setup.h; added some useful macros to allow gcc some
++**   optimizations if possible.
++** 5/10/96 Geert Uytterhoeven:
++**   Redesign of the boot information structure; moved boot information
++**   structure to bootinfo.h
++*/
++
++#ifndef _M68K_SETUP_H
++#define _M68K_SETUP_H
++
++
++
++    /*
++     *  Linux/m68k Architectures
++     */
++
++#define MACH_AMIGA    1
++#define MACH_ATARI    2
++#define MACH_MAC      3
++#define MACH_APOLLO   4
++#define MACH_SUN3     5
++#define MACH_MVME147  6
++#define MACH_MVME16x  7
++#define MACH_BVME6000 8
++#define MACH_HP300    9
++#define MACH_Q40     10
++#define MACH_SUN3X   11
++
++#define COMMAND_LINE_SIZE 256
++
++#ifdef __KERNEL__
++
++#define CL_SIZE COMMAND_LINE_SIZE
++
++#ifndef __ASSEMBLY__
++extern unsigned long m68k_machtype;
++#endif /* !__ASSEMBLY__ */
++
++#if !defined(CONFIG_AMIGA)
++#  define MACH_IS_AMIGA (0)
++#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
++      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
++#else
++#  define MACH_AMIGA_ONLY
++#  define MACH_IS_AMIGA (1)
++#  define MACH_TYPE (MACH_AMIGA)
++#endif
++
++#if !defined(CONFIG_ATARI)
++#  define MACH_IS_ATARI (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
++      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
++#else
++#  define MACH_ATARI_ONLY
++#  define MACH_IS_ATARI (1)
++#  define MACH_TYPE (MACH_ATARI)
++#endif
++
++#if !defined(CONFIG_MAC)
++#  define MACH_IS_MAC (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
++      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
++#else
++#  define MACH_MAC_ONLY
++#  define MACH_IS_MAC (1)
++#  define MACH_TYPE (MACH_MAC)
++#endif
++
++#if defined(CONFIG_SUN3)
++#define MACH_IS_SUN3 (1)
++#define MACH_SUN3_ONLY (1)
++#define MACH_TYPE (MACH_SUN3)
++#else
++#define MACH_IS_SUN3 (0)
++#endif
++
++#if !defined (CONFIG_APOLLO)
++#  define MACH_IS_APOLLO (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
++#else
++#  define MACH_APOLLO_ONLY
++#  define MACH_IS_APOLLO (1)
++#  define MACH_TYPE (MACH_APOLLO)
++#endif
++
++#if !defined (CONFIG_MVME147)
++#  define MACH_IS_MVME147 (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
++#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
++#else
++#  define MACH_MVME147_ONLY
++#  define MACH_IS_MVME147 (1)
++#  define MACH_TYPE (MACH_MVME147)
++#endif
++
++#if !defined (CONFIG_MVME16x)
++#  define MACH_IS_MVME16x (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
++#else
++#  define MACH_MVME16x_ONLY
++#  define MACH_IS_MVME16x (1)
++#  define MACH_TYPE (MACH_MVME16x)
++#endif
++
++#if !defined (CONFIG_BVME6000)
++#  define MACH_IS_BVME6000 (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
++      || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
++#else
++#  define MACH_BVME6000_ONLY
++#  define MACH_IS_BVME6000 (1)
++#  define MACH_TYPE (MACH_BVME6000)
++#endif
++
++#if !defined (CONFIG_HP300)
++#  define MACH_IS_HP300 (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
++      || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
++#else
++#  define MACH_HP300_ONLY
++#  define MACH_IS_HP300 (1)
++#  define MACH_TYPE (MACH_HP300)
++#endif
++
++#if !defined (CONFIG_Q40)
++#  define MACH_IS_Q40 (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
++      || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
++      || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
++#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
++#else
++#  define MACH_Q40_ONLY
++#  define MACH_IS_Q40 (1)
++#  define MACH_TYPE (MACH_Q40)
++#endif
++
++#if !defined (CONFIG_SUN3X)
++#  define MACH_IS_SUN3X (0)
++#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
++      || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
++      || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
++      || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
++#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
++#else
++#  define CONFIG_SUN3X_ONLY
++#  define MACH_IS_SUN3X (1)
++#  define MACH_TYPE (MACH_SUN3X)
++#endif
++
++#ifndef MACH_TYPE
++#  define MACH_TYPE (m68k_machtype)
++#endif
++
++#endif /* __KERNEL__ */
++
++
++    /*
++     *  CPU, FPU and MMU types
++     *
++     *  Note: we may rely on the following equalities:
++     *
++     *      CPU_68020 == MMU_68851
++     *      CPU_68030 == MMU_68030
++     *      CPU_68040 == FPU_68040 == MMU_68040
++     *      CPU_68060 == FPU_68060 == MMU_68060
++     */
++
++#define CPUB_68020     0
++#define CPUB_68030     1
++#define CPUB_68040     2
++#define CPUB_68060     3
++
++#define CPU_68020      (1<<CPUB_68020)
++#define CPU_68030      (1<<CPUB_68030)
++#define CPU_68040      (1<<CPUB_68040)
++#define CPU_68060      (1<<CPUB_68060)
++
++#define FPUB_68881     0
++#define FPUB_68882     1
++#define FPUB_68040     2                       /* Internal FPU */
++#define FPUB_68060     3                       /* Internal FPU */
++#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
++
++#define FPU_68881      (1<<FPUB_68881)
++#define FPU_68882      (1<<FPUB_68882)
++#define FPU_68040      (1<<FPUB_68040)
++#define FPU_68060      (1<<FPUB_68060)
++#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
++
++#define MMUB_68851     0
++#define MMUB_68030     1                       /* Internal MMU */
++#define MMUB_68040     2                       /* Internal MMU */
++#define MMUB_68060     3                       /* Internal MMU */
++#define MMUB_APOLLO    4                       /* Custom Apollo */
++#define MMUB_SUN3      5                       /* Custom Sun-3 */
++
++#define MMU_68851      (1<<MMUB_68851)
++#define MMU_68030      (1<<MMUB_68030)
++#define MMU_68040      (1<<MMUB_68040)
++#define MMU_68060      (1<<MMUB_68060)
++#define MMU_SUN3       (1<<MMUB_SUN3)
++#define MMU_APOLLO     (1<<MMUB_APOLLO)
++
++#ifdef __KERNEL__
++
++#ifndef __ASSEMBLY__
++extern unsigned long m68k_cputype;
++extern unsigned long m68k_fputype;
++extern unsigned long m68k_mmutype;
++#ifdef CONFIG_VME
++extern unsigned long vme_brdtype;
++#endif
++
++    /*
++     *  m68k_is040or060 is != 0 for a '040 or higher;
++     *  used numbers are 4 for 68040 and 6 for 68060.
++     */
++
++extern int m68k_is040or060;
++#endif /* !__ASSEMBLY__ */
++
++#if !defined(CONFIG_M68020)
++#  define CPU_IS_020 (0)
++#  define MMU_IS_851 (0)
++#  define MMU_IS_SUN3 (0)
++#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
++#  define CPU_IS_020 (m68k_cputype & CPU_68020)
++#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
++#  define MMU_IS_SUN3 (0)     /* Sun3 not supported with other CPU enabled */
++#else
++#  define CPU_M68020_ONLY
++#  define CPU_IS_020 (1)
++#ifdef MACH_SUN3_ONLY
++#  define MMU_IS_SUN3 (1)
++#  define MMU_IS_851 (0)
++#else
++#  define MMU_IS_SUN3 (0)
++#  define MMU_IS_851 (1)
++#endif
++#endif
++
++#if !defined(CONFIG_M68030)
++#  define CPU_IS_030 (0)
++#  define MMU_IS_030 (0)
++#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
++#  define CPU_IS_030 (m68k_cputype & CPU_68030)
++#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
++#else
++#  define CPU_M68030_ONLY
++#  define CPU_IS_030 (1)
++#  define MMU_IS_030 (1)
++#endif
++
++#if !defined(CONFIG_M68040)
++#  define CPU_IS_040 (0)
++#  define MMU_IS_040 (0)
++#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
++#  define CPU_IS_040 (m68k_cputype & CPU_68040)
++#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
++#else
++#  define CPU_M68040_ONLY
++#  define CPU_IS_040 (1)
++#  define MMU_IS_040 (1)
++#endif
++
++#if !defined(CONFIG_M68060)
++#  define CPU_IS_060 (0)
++#  define MMU_IS_060 (0)
++#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
++#  define CPU_IS_060 (m68k_cputype & CPU_68060)
++#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
++#else
++#  define CPU_M68060_ONLY
++#  define CPU_IS_060 (1)
++#  define MMU_IS_060 (1)
++#endif
++
++#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
++#  define CPU_IS_020_OR_030 (0)
++#else
++#  define CPU_M68020_OR_M68030
++#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
++#    define CPU_IS_020_OR_030 (!m68k_is040or060)
++#  else
++#    define CPU_M68020_OR_M68030_ONLY
++#    define CPU_IS_020_OR_030 (1)
++#  endif
++#endif
++
++#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
++#  define CPU_IS_040_OR_060 (0)
++#else
++#  define CPU_M68040_OR_M68060
++#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
++#    define CPU_IS_040_OR_060 (m68k_is040or060)
++#  else
++#    define CPU_M68040_OR_M68060_ONLY
++#    define CPU_IS_040_OR_060 (1)
++#  endif
++#endif
++
++#define CPU_TYPE (m68k_cputype)
++
++#ifdef CONFIG_M68KFPU_EMU
++#  ifdef CONFIG_M68KFPU_EMU_ONLY
++#    define FPU_IS_EMU (1)
++#  else
++#    define FPU_IS_EMU (!m68k_fputype)
++#  endif
++#else
++#  define FPU_IS_EMU (0)
++#endif
++
++
++    /*
++     *  Miscellaneous
++     */
++
++#define NUM_MEMINFO   4
++
++#ifndef __ASSEMBLY__
++struct mem_info {
++      unsigned long addr;             /* physical address of memory chunk */
++      unsigned long size;             /* length of memory chunk (in bytes) */
++};
++
++extern int m68k_num_memory;           /* # of memory blocks found (and used) */
++extern int m68k_realnum_memory;               /* real # of memory blocks found */
++extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
++#endif
++
++#endif /* __KERNEL__ */
++
++#endif /* _M68K_SETUP_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/setup_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/setup_no.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/setup_no.h     2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,10 @@
++#ifdef __KERNEL__
++
++#include <asm/setup_mm.h>
++
++/* We have a bigger command line buffer. */
++#undef COMMAND_LINE_SIZE
++
++#endif  /*  __KERNEL__  */
++
++#define COMMAND_LINE_SIZE     512
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext.h       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext.h   2009-05-10 23:48:28.000000000 +0200
+@@ -1,24 +1,5 @@
+-#ifndef _ASM_M68k_SIGCONTEXT_H
+-#define _ASM_M68k_SIGCONTEXT_H
+-
+-struct sigcontext {
+-      unsigned long  sc_mask;         /* old sigmask */
+-      unsigned long  sc_usp;          /* old user stack pointer */
+-      unsigned long  sc_d0;
+-      unsigned long  sc_d1;
+-      unsigned long  sc_a0;
+-      unsigned long  sc_a1;
+ #ifdef __uClinux__
+-      unsigned long  sc_a5;
+-#endif
+-      unsigned short sc_sr;
+-      unsigned long  sc_pc;
+-      unsigned short sc_formatvec;
+-#ifndef __uClinux__
+-      unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
+-      unsigned long  sc_fpcntl[3];
+-      unsigned char  sc_fpstate[216];
+-#endif
+-};
+-
++#include "sigcontext_no.h"
++#else
++#include "sigcontext_mm.h"
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext_mm.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext_mm.h        2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,19 @@
++#ifndef _ASM_M68k_SIGCONTEXT_H
++#define _ASM_M68k_SIGCONTEXT_H
++
++struct sigcontext {
++      unsigned long  sc_mask;         /* old sigmask */
++      unsigned long  sc_usp;          /* old user stack pointer */
++      unsigned long  sc_d0;
++      unsigned long  sc_d1;
++      unsigned long  sc_a0;
++      unsigned long  sc_a1;
++      unsigned short sc_sr;
++      unsigned long  sc_pc;
++      unsigned short sc_formatvec;
++      unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
++      unsigned long  sc_fpcntl[3];
++      unsigned char  sc_fpstate[216];
++};
++
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/sigcontext_no.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/sigcontext_no.h        2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,17 @@
++#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
++#define _ASM_M68KNOMMU_SIGCONTEXT_H
++
++struct sigcontext {
++      unsigned long  sc_mask;         /* old sigmask */
++      unsigned long  sc_usp;          /* old user stack pointer */
++      unsigned long  sc_d0;
++      unsigned long  sc_d1;
++      unsigned long  sc_a0;
++      unsigned long  sc_a1;
++      unsigned long  sc_a5;
++      unsigned short sc_sr;
++      unsigned long  sc_pc;
++      unsigned short sc_formatvec;
++};
++
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/siginfo.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/siginfo.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo.h      2009-05-10 23:48:28.000000000 +0200
+@@ -1,97 +1,5 @@
+-#ifndef _M68K_SIGINFO_H
+-#define _M68K_SIGINFO_H
+-
+-#ifndef __uClinux__
+-#define HAVE_ARCH_SIGINFO_T
+-#define HAVE_ARCH_COPY_SIGINFO
+-#endif
+-
+-#include <asm-generic/siginfo.h>
+-
+-#ifndef __uClinux__
+-
+-typedef struct siginfo {
+-      int si_signo;
+-      int si_errno;
+-      int si_code;
+-
+-      union {
+-              int _pad[SI_PAD_SIZE];
+-
+-              /* kill() */
+-              struct {
+-                      __kernel_pid_t _pid;    /* sender's pid */
+-                      __kernel_uid_t _uid;    /* backwards compatibility */
+-                      __kernel_uid32_t _uid32; /* sender's uid */
+-              } _kill;
+-
+-              /* POSIX.1b timers */
+-              struct {
+-                      timer_t _tid;           /* timer id */
+-                      int _overrun;           /* overrun count */
+-                      char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+-                      sigval_t _sigval;       /* same as below */
+-                      int _sys_private;       /* not to be passed to user */
+-              } _timer;
+-
+-              /* POSIX.1b signals */
+-              struct {
+-                      __kernel_pid_t _pid;    /* sender's pid */
+-                      __kernel_uid_t _uid;    /* backwards compatibility */
+-                      sigval_t _sigval;
+-                      __kernel_uid32_t _uid32; /* sender's uid */
+-              } _rt;
+-
+-              /* SIGCHLD */
+-              struct {
+-                      __kernel_pid_t _pid;    /* which child */
+-                      __kernel_uid_t _uid;    /* backwards compatibility */
+-                      int _status;            /* exit code */
+-                      clock_t _utime;
+-                      clock_t _stime;
+-                      __kernel_uid32_t _uid32; /* sender's uid */
+-              } _sigchld;
+-
+-              /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+-              struct {
+-                      void *_addr; /* faulting insn/memory ref. */
+-              } _sigfault;
+-
+-              /* SIGPOLL */
+-              struct {
+-                      int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
+-                      int _fd;
+-              } _sigpoll;
+-      } _sifields;
+-} siginfo_t;
+-
+-#define UID16_SIGINFO_COMPAT_NEEDED
+-
+-/*
+- * How these fields are to be accessed.
+- */
+-#undef si_uid
+-#ifdef __KERNEL__
+-#define si_uid                _sifields._kill._uid32
+-#define si_uid16      _sifields._kill._uid
++#ifdef __uClinux__
++#include "siginfo_no.h"
+ #else
+-#define si_uid                _sifields._kill._uid
+-#endif
+-
+-#ifdef __KERNEL__
+-
+-#include <linux/string.h>
+-
+-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+-{
+-      if (from->si_code < 0)
+-              memcpy(to, from, sizeof(*to));
+-      else
+-              /* _sigchld is currently the largest know union member */
+-              memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+-}
+-
+-#endif /* __KERNEL__ */
+-#endif /* !__uClinux__ */
+-
++#include "siginfo_mm.h"
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/siginfo_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/siginfo_mm.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo_mm.h   2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,92 @@
++#ifndef _M68K_SIGINFO_H
++#define _M68K_SIGINFO_H
++
++#define HAVE_ARCH_SIGINFO_T
++#define HAVE_ARCH_COPY_SIGINFO
++
++#include <asm-generic/siginfo.h>
++
++typedef struct siginfo {
++      int si_signo;
++      int si_errno;
++      int si_code;
++
++      union {
++              int _pad[SI_PAD_SIZE];
++
++              /* kill() */
++              struct {
++                      __kernel_pid_t _pid;    /* sender's pid */
++                      __kernel_uid_t _uid;    /* backwards compatibility */
++                      __kernel_uid32_t _uid32; /* sender's uid */
++              } _kill;
++
++              /* POSIX.1b timers */
++              struct {
++                      timer_t _tid;           /* timer id */
++                      int _overrun;           /* overrun count */
++                      char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
++                      sigval_t _sigval;       /* same as below */
++                      int _sys_private;       /* not to be passed to user */
++              } _timer;
++
++              /* POSIX.1b signals */
++              struct {
++                      __kernel_pid_t _pid;    /* sender's pid */
++                      __kernel_uid_t _uid;    /* backwards compatibility */
++                      sigval_t _sigval;
++                      __kernel_uid32_t _uid32; /* sender's uid */
++              } _rt;
++
++              /* SIGCHLD */
++              struct {
++                      __kernel_pid_t _pid;    /* which child */
++                      __kernel_uid_t _uid;    /* backwards compatibility */
++                      int _status;            /* exit code */
++                      clock_t _utime;
++                      clock_t _stime;
++                      __kernel_uid32_t _uid32; /* sender's uid */
++              } _sigchld;
++
++              /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
++              struct {
++                      void *_addr; /* faulting insn/memory ref. */
++              } _sigfault;
++
++              /* SIGPOLL */
++              struct {
++                      int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
++                      int _fd;
++              } _sigpoll;
++      } _sifields;
++} siginfo_t;
++
++#define UID16_SIGINFO_COMPAT_NEEDED
++
++/*
++ * How these fields are to be accessed.
++ */
++#undef si_uid
++#ifdef __KERNEL__
++#define si_uid                _sifields._kill._uid32
++#define si_uid16      _sifields._kill._uid
++#else
++#define si_uid                _sifields._kill._uid
++#endif
++
++#ifdef __KERNEL__
++
++#include <linux/string.h>
++
++static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
++{
++      if (from->si_code < 0)
++              memcpy(to, from, sizeof(*to));
++      else
++              /* _sigchld is currently the largest know union member */
++              memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
++}
++
++#endif /* __KERNEL__ */
++
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/siginfo_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/siginfo_no.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/siginfo_no.h   2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,6 @@
++#ifndef _M68KNOMMU_SIGINFO_H
++#define _M68KNOMMU_SIGINFO_H
++
++#include <asm-generic/siginfo.h>
++
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/signal.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/signal.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal.h       2009-05-10 23:48:28.000000000 +0200
+@@ -1,213 +1,5 @@
+-#ifndef _M68K_SIGNAL_H
+-#define _M68K_SIGNAL_H
+-
+-#include <linux/types.h>
+-
+-/* Avoid too many header ordering problems.  */
+-struct siginfo;
+-
+-#ifdef __KERNEL__
+-/* Most things should be clean enough to redefine this at will, if care
+-   is taken to make libc match.  */
+-
+-#define _NSIG         64
+-#define _NSIG_BPW     32
+-#define _NSIG_WORDS   (_NSIG / _NSIG_BPW)
+-
+-typedef unsigned long old_sigset_t;           /* at least 32 bits */
+-
+-typedef struct {
+-      unsigned long sig[_NSIG_WORDS];
+-} sigset_t;
+-
++#ifdef __uClinux__
++#include "signal_no.h"
+ #else
+-/* Here we must cater to libcs that poke about in kernel headers.  */
+-
+-#define NSIG          32
+-typedef unsigned long sigset_t;
+-
+-#endif /* __KERNEL__ */
+-
+-#define SIGHUP                 1
+-#define SIGINT                 2
+-#define SIGQUIT                3
+-#define SIGILL                 4
+-#define SIGTRAP                5
+-#define SIGABRT                6
+-#define SIGIOT                 6
+-#define SIGBUS                 7
+-#define SIGFPE                 8
+-#define SIGKILL                9
+-#define SIGUSR1               10
+-#define SIGSEGV               11
+-#define SIGUSR2               12
+-#define SIGPIPE               13
+-#define SIGALRM               14
+-#define SIGTERM               15
+-#define SIGSTKFLT     16
+-#define SIGCHLD               17
+-#define SIGCONT               18
+-#define SIGSTOP               19
+-#define SIGTSTP               20
+-#define SIGTTIN               21
+-#define SIGTTOU               22
+-#define SIGURG                23
+-#define SIGXCPU               24
+-#define SIGXFSZ               25
+-#define SIGVTALRM     26
+-#define SIGPROF               27
+-#define SIGWINCH      28
+-#define SIGIO         29
+-#define SIGPOLL               SIGIO
+-/*
+-#define SIGLOST               29
+-*/
+-#define SIGPWR                30
+-#define SIGSYS                31
+-#define       SIGUNUSED       31
+-
+-/* These should not be considered constants from userland.  */
+-#define SIGRTMIN      32
+-#define SIGRTMAX      _NSIG
+-
+-/*
+- * SA_FLAGS values:
+- *
+- * SA_ONSTACK indicates that a registered stack_t will be used.
+- * SA_RESTART flag to get restarting signals (which were the default long ago)
+- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+- * SA_RESETHAND clears the handler when the signal is delivered.
+- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+- * SA_NODEFER prevents the current signal from being masked in the handler.
+- *
+- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+- * Unix names RESETHAND and NODEFER respectively.
+- */
+-#define SA_NOCLDSTOP  0x00000001
+-#define SA_NOCLDWAIT  0x00000002
+-#define SA_SIGINFO    0x00000004
+-#define SA_ONSTACK    0x08000000
+-#define SA_RESTART    0x10000000
+-#define SA_NODEFER    0x40000000
+-#define SA_RESETHAND  0x80000000
+-
+-#define SA_NOMASK     SA_NODEFER
+-#define SA_ONESHOT    SA_RESETHAND
+-
+-/*
+- * sigaltstack controls
+- */
+-#define SS_ONSTACK    1
+-#define SS_DISABLE    2
+-
+-#define MINSIGSTKSZ   2048
+-#define SIGSTKSZ      8192
+-
+-#include <asm-generic/signal.h>
+-
+-#ifdef __KERNEL__
+-struct old_sigaction {
+-      __sighandler_t sa_handler;
+-      old_sigset_t sa_mask;
+-      unsigned long sa_flags;
+-      __sigrestore_t sa_restorer;
+-};
+-
+-struct sigaction {
+-      __sighandler_t sa_handler;
+-      unsigned long sa_flags;
+-      __sigrestore_t sa_restorer;
+-      sigset_t sa_mask;               /* mask last for extensibility */
+-};
+-
+-struct k_sigaction {
+-      struct sigaction sa;
+-};
+-#else
+-/* Here we must cater to libcs that poke about in kernel headers.  */
+-
+-struct sigaction {
+-      union {
+-        __sighandler_t _sa_handler;
+-        void (*_sa_sigaction)(int, struct siginfo *, void *);
+-      } _u;
+-      sigset_t sa_mask;
+-      unsigned long sa_flags;
+-      void (*sa_restorer)(void);
+-};
+-
+-#define sa_handler    _u._sa_handler
+-#define sa_sigaction  _u._sa_sigaction
+-
+-#endif /* __KERNEL__ */
+-
+-typedef struct sigaltstack {
+-      void __user *ss_sp;
+-      int ss_flags;
+-      size_t ss_size;
+-} stack_t;
+-
+-#ifdef __KERNEL__
+-#include <asm/sigcontext.h>
+-
+-#ifndef __uClinux__
+-#define __HAVE_ARCH_SIG_BITOPS
+-
+-static inline void sigaddset(sigset_t *set, int _sig)
+-{
+-      asm ("bfset %0{%1,#1}"
+-              : "+od" (*set)
+-              : "id" ((_sig - 1) ^ 31)
+-              : "cc");
+-}
+-
+-static inline void sigdelset(sigset_t *set, int _sig)
+-{
+-      asm ("bfclr %0{%1,#1}"
+-              : "+od" (*set)
+-              : "id" ((_sig - 1) ^ 31)
+-              : "cc");
+-}
+-
+-static inline int __const_sigismember(sigset_t *set, int _sig)
+-{
+-      unsigned long sig = _sig - 1;
+-      return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+-}
+-
+-static inline int __gen_sigismember(sigset_t *set, int _sig)
+-{
+-      int ret;
+-      asm ("bfextu %1{%2,#1},%0"
+-              : "=d" (ret)
+-              : "od" (*set), "id" ((_sig-1) ^ 31)
+-              : "cc");
+-      return ret;
+-}
+-
+-#define sigismember(set,sig)                  \
+-      (__builtin_constant_p(sig) ?            \
+-       __const_sigismember(set,sig) :         \
+-       __gen_sigismember(set,sig))
+-
+-static inline int sigfindinword(unsigned long word)
+-{
+-      asm ("bfffo %1{#0,#0},%0"
+-              : "=d" (word)
+-              : "d" (word & -word)
+-              : "cc");
+-      return word ^ 31;
+-}
+-
+-struct pt_regs;
+-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+-
+-#else
+-
+-#undef __HAVE_ARCH_SIG_BITOPS
+-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+-
+-#endif /* __uClinux__ */
+-#endif /* __KERNEL__ */
+-
+-#endif /* _M68K_SIGNAL_H */
++#include "signal_mm.h"
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/signal_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/signal_mm.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal_mm.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,206 @@
++#ifndef _M68K_SIGNAL_H
++#define _M68K_SIGNAL_H
++
++#include <linux/types.h>
++
++/* Avoid too many header ordering problems.  */
++struct siginfo;
++
++#ifdef __KERNEL__
++/* Most things should be clean enough to redefine this at will, if care
++   is taken to make libc match.  */
++
++#define _NSIG         64
++#define _NSIG_BPW     32
++#define _NSIG_WORDS   (_NSIG / _NSIG_BPW)
++
++typedef unsigned long old_sigset_t;           /* at least 32 bits */
++
++typedef struct {
++      unsigned long sig[_NSIG_WORDS];
++} sigset_t;
++
++#else
++/* Here we must cater to libcs that poke about in kernel headers.  */
++
++#define NSIG          32
++typedef unsigned long sigset_t;
++
++#endif /* __KERNEL__ */
++
++#define SIGHUP                 1
++#define SIGINT                 2
++#define SIGQUIT                3
++#define SIGILL                 4
++#define SIGTRAP                5
++#define SIGABRT                6
++#define SIGIOT                 6
++#define SIGBUS                 7
++#define SIGFPE                 8
++#define SIGKILL                9
++#define SIGUSR1               10
++#define SIGSEGV               11
++#define SIGUSR2               12
++#define SIGPIPE               13
++#define SIGALRM               14
++#define SIGTERM               15
++#define SIGSTKFLT     16
++#define SIGCHLD               17
++#define SIGCONT               18
++#define SIGSTOP               19
++#define SIGTSTP               20
++#define SIGTTIN               21
++#define SIGTTOU               22
++#define SIGURG                23
++#define SIGXCPU               24
++#define SIGXFSZ               25
++#define SIGVTALRM     26
++#define SIGPROF               27
++#define SIGWINCH      28
++#define SIGIO         29
++#define SIGPOLL               SIGIO
++/*
++#define SIGLOST               29
++*/
++#define SIGPWR                30
++#define SIGSYS                31
++#define       SIGUNUSED       31
++
++/* These should not be considered constants from userland.  */
++#define SIGRTMIN      32
++#define SIGRTMAX      _NSIG
++
++/*
++ * SA_FLAGS values:
++ *
++ * SA_ONSTACK indicates that a registered stack_t will be used.
++ * SA_RESTART flag to get restarting signals (which were the default long ago)
++ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
++ * SA_RESETHAND clears the handler when the signal is delivered.
++ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
++ * SA_NODEFER prevents the current signal from being masked in the handler.
++ *
++ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
++ * Unix names RESETHAND and NODEFER respectively.
++ */
++#define SA_NOCLDSTOP  0x00000001
++#define SA_NOCLDWAIT  0x00000002
++#define SA_SIGINFO    0x00000004
++#define SA_ONSTACK    0x08000000
++#define SA_RESTART    0x10000000
++#define SA_NODEFER    0x40000000
++#define SA_RESETHAND  0x80000000
++
++#define SA_NOMASK     SA_NODEFER
++#define SA_ONESHOT    SA_RESETHAND
++
++/*
++ * sigaltstack controls
++ */
++#define SS_ONSTACK    1
++#define SS_DISABLE    2
++
++#define MINSIGSTKSZ   2048
++#define SIGSTKSZ      8192
++
++#include <asm-generic/signal.h>
++
++#ifdef __KERNEL__
++struct old_sigaction {
++      __sighandler_t sa_handler;
++      old_sigset_t sa_mask;
++      unsigned long sa_flags;
++      __sigrestore_t sa_restorer;
++};
++
++struct sigaction {
++      __sighandler_t sa_handler;
++      unsigned long sa_flags;
++      __sigrestore_t sa_restorer;
++      sigset_t sa_mask;               /* mask last for extensibility */
++};
++
++struct k_sigaction {
++      struct sigaction sa;
++};
++#else
++/* Here we must cater to libcs that poke about in kernel headers.  */
++
++struct sigaction {
++      union {
++        __sighandler_t _sa_handler;
++        void (*_sa_sigaction)(int, struct siginfo *, void *);
++      } _u;
++      sigset_t sa_mask;
++      unsigned long sa_flags;
++      void (*sa_restorer)(void);
++};
++
++#define sa_handler    _u._sa_handler
++#define sa_sigaction  _u._sa_sigaction
++
++#endif /* __KERNEL__ */
++
++typedef struct sigaltstack {
++      void __user *ss_sp;
++      int ss_flags;
++      size_t ss_size;
++} stack_t;
++
++#ifdef __KERNEL__
++#include <asm/sigcontext.h>
++
++#define __HAVE_ARCH_SIG_BITOPS
++
++static inline void sigaddset(sigset_t *set, int _sig)
++{
++      asm ("bfset %0{%1,#1}"
++              : "+od" (*set)
++              : "id" ((_sig - 1) ^ 31)
++              : "cc");
++}
++
++static inline void sigdelset(sigset_t *set, int _sig)
++{
++      asm ("bfclr %0{%1,#1}"
++              : "+od" (*set)
++              : "id" ((_sig - 1) ^ 31)
++              : "cc");
++}
++
++static inline int __const_sigismember(sigset_t *set, int _sig)
++{
++      unsigned long sig = _sig - 1;
++      return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
++}
++
++static inline int __gen_sigismember(sigset_t *set, int _sig)
++{
++      int ret;
++      asm ("bfextu %1{%2,#1},%0"
++              : "=d" (ret)
++              : "od" (*set), "id" ((_sig-1) ^ 31)
++              : "cc");
++      return ret;
++}
++
++#define sigismember(set,sig)                  \
++      (__builtin_constant_p(sig) ?            \
++       __const_sigismember(set,sig) :         \
++       __gen_sigismember(set,sig))
++
++static inline int sigfindinword(unsigned long word)
++{
++      asm ("bfffo %1{#0,#0},%0"
++              : "=d" (word)
++              : "d" (word & -word)
++              : "cc");
++      return word ^ 31;
++}
++
++struct pt_regs;
++extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
++
++#endif /* __KERNEL__ */
++
++#endif /* _M68K_SIGNAL_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/signal_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/signal_no.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/signal_no.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,159 @@
++#ifndef _M68KNOMMU_SIGNAL_H
++#define _M68KNOMMU_SIGNAL_H
++
++#include <linux/types.h>
++
++/* Avoid too many header ordering problems.  */
++struct siginfo;
++
++#ifdef __KERNEL__
++/* Most things should be clean enough to redefine this at will, if care
++   is taken to make libc match.  */
++
++#define _NSIG         64
++#define _NSIG_BPW     32
++#define _NSIG_WORDS   (_NSIG / _NSIG_BPW)
++
++typedef unsigned long old_sigset_t;           /* at least 32 bits */
++
++typedef struct {
++      unsigned long sig[_NSIG_WORDS];
++} sigset_t;
++
++#else
++/* Here we must cater to libcs that poke about in kernel headers.  */
++
++#define NSIG          32
++typedef unsigned long sigset_t;
++
++#endif /* __KERNEL__ */
++
++#define SIGHUP                 1
++#define SIGINT                 2
++#define SIGQUIT                3
++#define SIGILL                 4
++#define SIGTRAP                5
++#define SIGABRT                6
++#define SIGIOT                 6
++#define SIGBUS                 7
++#define SIGFPE                 8
++#define SIGKILL                9
++#define SIGUSR1               10
++#define SIGSEGV               11
++#define SIGUSR2               12
++#define SIGPIPE               13
++#define SIGALRM               14
++#define SIGTERM               15
++#define SIGSTKFLT     16
++#define SIGCHLD               17
++#define SIGCONT               18
++#define SIGSTOP               19
++#define SIGTSTP               20
++#define SIGTTIN               21
++#define SIGTTOU               22
++#define SIGURG                23
++#define SIGXCPU               24
++#define SIGXFSZ               25
++#define SIGVTALRM     26
++#define SIGPROF               27
++#define SIGWINCH      28
++#define SIGIO         29
++#define SIGPOLL               SIGIO
++/*
++#define SIGLOST               29
++*/
++#define SIGPWR                30
++#define SIGSYS                31
++#define       SIGUNUSED       31
++
++/* These should not be considered constants from userland.  */
++#define SIGRTMIN      32
++#define SIGRTMAX      _NSIG
++
++/*
++ * SA_FLAGS values:
++ *
++ * SA_ONSTACK indicates that a registered stack_t will be used.
++ * SA_RESTART flag to get restarting signals (which were the default long ago)
++ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
++ * SA_RESETHAND clears the handler when the signal is delivered.
++ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
++ * SA_NODEFER prevents the current signal from being masked in the handler.
++ *
++ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
++ * Unix names RESETHAND and NODEFER respectively.
++ */
++#define SA_NOCLDSTOP  0x00000001
++#define SA_NOCLDWAIT  0x00000002
++#define SA_SIGINFO    0x00000004
++#define SA_ONSTACK    0x08000000
++#define SA_RESTART    0x10000000
++#define SA_NODEFER    0x40000000
++#define SA_RESETHAND  0x80000000
++
++#define SA_NOMASK     SA_NODEFER
++#define SA_ONESHOT    SA_RESETHAND
++
++/* 
++ * sigaltstack controls
++ */
++#define SS_ONSTACK    1
++#define SS_DISABLE    2
++
++#define MINSIGSTKSZ   2048
++#define SIGSTKSZ      8192
++
++#include <asm-generic/signal.h>
++
++#ifdef __KERNEL__
++struct old_sigaction {
++      __sighandler_t sa_handler;
++      old_sigset_t sa_mask;
++      unsigned long sa_flags;
++      void (*sa_restorer)(void);
++};
++
++struct sigaction {
++      __sighandler_t sa_handler;
++      unsigned long sa_flags;
++      void (*sa_restorer)(void);
++      sigset_t sa_mask;               /* mask last for extensibility */
++};
++
++struct k_sigaction {
++      struct sigaction sa;
++};
++#else
++/* Here we must cater to libcs that poke about in kernel headers.  */
++
++struct sigaction {
++      union {
++        __sighandler_t _sa_handler;
++        void (*_sa_sigaction)(int, struct siginfo *, void *);
++      } _u;
++      sigset_t sa_mask;
++      unsigned long sa_flags;
++      void (*sa_restorer)(void);
++};
++
++#define sa_handler    _u._sa_handler
++#define sa_sigaction  _u._sa_sigaction
++
++#endif /* __KERNEL__ */
++
++typedef struct sigaltstack {
++      void *ss_sp;
++      int ss_flags;
++      size_t ss_size;
++} stack_t;
++
++#ifdef __KERNEL__
++
++#include <asm/sigcontext.h>
++#undef __HAVE_ARCH_SIG_BITOPS
++
++#define ptrace_signal_deliver(regs, cookie) do { } while (0)
++
++#endif /* __KERNEL__ */
++
++#endif /* _M68KNOMMU_SIGNAL_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/swab.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/swab.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab.h 2009-05-10 23:48:28.000000000 +0200
+@@ -1,27 +1,5 @@
+-#ifndef _M68K_SWAB_H
+-#define _M68K_SWAB_H
+-
+-#include <asm/types.h>
+-#include <linux/compiler.h>
+-
+-#define __SWAB_64_THRU_32__
+-
+-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+-{
+-      __asm__("byterev %0" : "=d" (val) : "0" (val));
+-      return val;
+-}
+-
+-#define __arch_swab32 __arch_swab32
+-#elif !defined(__uClinux__)
+-
+-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+-{
+-      __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+-      return val;
+-}
+-#define __arch_swab32 __arch_swab32
++#ifdef __uClinux__
++#include "swab_no.h"
++#else
++#include "swab_mm.h"
+ #endif
+-
+-#endif /* _M68K_SWAB_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/swab_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/swab_mm.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab_mm.h      2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,16 @@
++#ifndef _M68K_SWAB_H
++#define _M68K_SWAB_H
++
++#include <asm/types.h>
++#include <linux/compiler.h>
++
++#define __SWAB_64_THRU_32__
++
++static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
++{
++      __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
++      return val;
++}
++#define __arch_swab32 __arch_swab32
++
++#endif /* _M68K_SWAB_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/swab_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/swab_no.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/swab_no.h      2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,24 @@
++#ifndef _M68KNOMMU_SWAB_H
++#define _M68KNOMMU_SWAB_H
++
++#include <linux/types.h>
++
++#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
++#  define __SWAB_64_THRU_32__
++#endif
++
++#if defined (__mcfisaaplus__) || defined (__mcfisac__)
++static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
++{
++      asm(
++                      "byterev %0"
++                      : "=d" (val)
++                      : "0" (val)
++         );
++      return val;
++}
++
++#define __arch_swab32 __arch_swab32
++#endif
++
++#endif /* _M68KNOMMU_SWAB_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/unistd.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/unistd.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd.h       2009-05-10 23:48:28.000000000 +0200
+@@ -1,372 +1,5 @@
+-#ifndef _ASM_M68K_UNISTD_H_
+-#define _ASM_M68K_UNISTD_H_
+-
+-/*
+- * This file contains the system call numbers.
+- */
+-
+-#define __NR_restart_syscall    0
+-#define __NR_exit               1
+-#define __NR_fork               2
+-#define __NR_read               3
+-#define __NR_write              4
+-#define __NR_open               5
+-#define __NR_close              6
+-#define __NR_waitpid            7
+-#define __NR_creat              8
+-#define __NR_link               9
+-#define __NR_unlink            10
+-#define __NR_execve            11
+-#define __NR_chdir             12
+-#define __NR_time              13
+-#define __NR_mknod             14
+-#define __NR_chmod             15
+-#define __NR_chown             16
+-#define __NR_break             17
+-#define __NR_oldstat           18
+-#define __NR_lseek             19
+-#define __NR_getpid            20
+-#define __NR_mount             21
+-#define __NR_umount            22
+-#define __NR_setuid            23
+-#define __NR_getuid            24
+-#define __NR_stime             25
+-#define __NR_ptrace            26
+-#define __NR_alarm             27
+-#define __NR_oldfstat          28
+-#define __NR_pause             29
+-#define __NR_utime             30
+-#define __NR_stty              31
+-#define __NR_gtty              32
+-#define __NR_access            33
+-#define __NR_nice              34
+-#define __NR_ftime             35
+-#define __NR_sync              36
+-#define __NR_kill              37
+-#define __NR_rename            38
+-#define __NR_mkdir             39
+-#define __NR_rmdir             40
+-#define __NR_dup               41
+-#define __NR_pipe              42
+-#define __NR_times             43
+-#define __NR_prof              44
+-#define __NR_brk               45
+-#define __NR_setgid            46
+-#define __NR_getgid            47
+-#define __NR_signal            48
+-#define __NR_geteuid           49
+-#define __NR_getegid           50
+-#define __NR_acct              51
+-#define __NR_umount2           52
+-#define __NR_lock              53
+-#define __NR_ioctl             54
+-#define __NR_fcntl             55
+-#define __NR_mpx               56
+-#define __NR_setpgid           57
+-#define __NR_ulimit            58
+-#define __NR_oldolduname       59
+-#define __NR_umask             60
+-#define __NR_chroot            61
+-#define __NR_ustat             62
+-#define __NR_dup2              63
+-#define __NR_getppid           64
+-#define __NR_getpgrp           65
+-#define __NR_setsid            66
+-#define __NR_sigaction                 67
+-#define __NR_sgetmask          68
+-#define __NR_ssetmask          69
+-#define __NR_setreuid          70
+-#define __NR_setregid          71
+-#define __NR_sigsuspend                72
+-#define __NR_sigpending                73
+-#define __NR_sethostname       74
+-#define __NR_setrlimit                 75
+-#define __NR_getrlimit                 76
+-#define __NR_getrusage                 77
+-#define __NR_gettimeofday      78
+-#define __NR_settimeofday      79
+-#define __NR_getgroups                 80
+-#define __NR_setgroups                 81
+-#define __NR_select            82
+-#define __NR_symlink           83
+-#define __NR_oldlstat          84
+-#define __NR_readlink          85
+-#define __NR_uselib            86
+-#define __NR_swapon            87
+-#define __NR_reboot            88
+-#define __NR_readdir           89
+-#define __NR_mmap              90
+-#define __NR_munmap            91
+-#define __NR_truncate          92
+-#define __NR_ftruncate                 93
+-#define __NR_fchmod            94
+-#define __NR_fchown            95
+-#define __NR_getpriority       96
+-#define __NR_setpriority       97
+-#define __NR_profil            98
+-#define __NR_statfs            99
+-#define __NR_fstatfs          100
+-#define __NR_ioperm           101
+-#define __NR_socketcall               102
+-#define __NR_syslog           103
+-#define __NR_setitimer                104
+-#define __NR_getitimer                105
+-#define __NR_stat             106
+-#define __NR_lstat            107
+-#define __NR_fstat            108
+-#define __NR_olduname         109
+-#define __NR_iopl             /* 110 */ not supported
+-#define __NR_vhangup          111
+-#define __NR_idle             /* 112 */ Obsolete
+-#define __NR_vm86             /* 113 */ not supported
+-#define __NR_wait4            114
+-#define __NR_swapoff          115
+-#define __NR_sysinfo          116
+-#define __NR_ipc              117
+-#define __NR_fsync            118
+-#define __NR_sigreturn                119
+-#define __NR_clone            120
+-#define __NR_setdomainname    121
+-#define __NR_uname            122
+-#define __NR_cacheflush               123
+-#define __NR_adjtimex         124
+-#define __NR_mprotect         125
+-#define __NR_sigprocmask      126
+-#define __NR_create_module    127
+-#define __NR_init_module      128
+-#define __NR_delete_module    129
+-#define __NR_get_kernel_syms  130
+-#define __NR_quotactl         131
+-#define __NR_getpgid          132
+-#define __NR_fchdir           133
+-#define __NR_bdflush          134
+-#define __NR_sysfs            135
+-#define __NR_personality      136
+-#define __NR_afs_syscall      137 /* Syscall for Andrew File System */
+-#define __NR_setfsuid         138
+-#define __NR_setfsgid         139
+-#define __NR__llseek          140
+-#define __NR_getdents         141
+-#define __NR__newselect               142
+-#define __NR_flock            143
+-#define __NR_msync            144
+-#define __NR_readv            145
+-#define __NR_writev           146
+-#define __NR_getsid           147
+-#define __NR_fdatasync                148
+-#define __NR__sysctl          149
+-#define __NR_mlock            150
+-#define __NR_munlock          151
+-#define __NR_mlockall         152
+-#define __NR_munlockall               153
+-#define __NR_sched_setparam           154
+-#define __NR_sched_getparam           155
+-#define __NR_sched_setscheduler               156
+-#define __NR_sched_getscheduler               157
+-#define __NR_sched_yield              158
+-#define __NR_sched_get_priority_max   159
+-#define __NR_sched_get_priority_min   160
+-#define __NR_sched_rr_get_interval    161
+-#define __NR_nanosleep                162
+-#define __NR_mremap           163
+-#define __NR_setresuid                164
+-#define __NR_getresuid                165
+-#define __NR_getpagesize      166
+-#define __NR_query_module     167
+-#define __NR_poll             168
+-#define __NR_nfsservctl               169
+-#define __NR_setresgid                170
+-#define __NR_getresgid                171
+-#define __NR_prctl            172
+-#define __NR_rt_sigreturn     173
+-#define __NR_rt_sigaction     174
+-#define __NR_rt_sigprocmask   175
+-#define __NR_rt_sigpending    176
+-#define __NR_rt_sigtimedwait  177
+-#define __NR_rt_sigqueueinfo  178
+-#define __NR_rt_sigsuspend    179
+-#define __NR_pread64          180
+-#define __NR_pwrite64         181
+-#define __NR_lchown           182
+-#define __NR_getcwd           183
+-#define __NR_capget           184
+-#define __NR_capset           185
+-#define __NR_sigaltstack      186
+-#define __NR_sendfile         187
+-#define __NR_getpmsg          188     /* some people actually want streams */
+-#define __NR_putpmsg          189     /* some people actually want streams */
+-#define __NR_vfork            190
+-#define __NR_ugetrlimit               191
+-#define __NR_mmap2            192
+-#define __NR_truncate64               193
+-#define __NR_ftruncate64      194
+-#define __NR_stat64           195
+-#define __NR_lstat64          196
+-#define __NR_fstat64          197
+-#define __NR_chown32          198
+-#define __NR_getuid32         199
+-#define __NR_getgid32         200
+-#define __NR_geteuid32                201
+-#define __NR_getegid32                202
+-#define __NR_setreuid32               203
+-#define __NR_setregid32               204
+-#define __NR_getgroups32      205
+-#define __NR_setgroups32      206
+-#define __NR_fchown32         207
+-#define __NR_setresuid32      208
+-#define __NR_getresuid32      209
+-#define __NR_setresgid32      210
+-#define __NR_getresgid32      211
+-#define __NR_lchown32         212
+-#define __NR_setuid32         213
+-#define __NR_setgid32         214
+-#define __NR_setfsuid32               215
+-#define __NR_setfsgid32               216
+-#define __NR_pivot_root               217
+-#define __NR_getdents64               220
+-#define __NR_gettid           221
+-#define __NR_tkill            222
+-#define __NR_setxattr         223
+-#define __NR_lsetxattr                224
+-#define __NR_fsetxattr                225
+-#define __NR_getxattr         226
+-#define __NR_lgetxattr                227
+-#define __NR_fgetxattr                228
+-#define __NR_listxattr                229
+-#define __NR_llistxattr               230
+-#define __NR_flistxattr               231
+-#define __NR_removexattr      232
+-#define __NR_lremovexattr     233
+-#define __NR_fremovexattr     234
+-#define __NR_futex            235
+-#define __NR_sendfile64               236
+-#define __NR_mincore          237
+-#define __NR_madvise          238
+-#define __NR_fcntl64          239
+-#define __NR_readahead                240
+-#define __NR_io_setup         241
+-#define __NR_io_destroy               242
+-#define __NR_io_getevents     243
+-#define __NR_io_submit                244
+-#define __NR_io_cancel                245
+-#define __NR_fadvise64                246
+-#define __NR_exit_group               247
+-#define __NR_lookup_dcookie   248
+-#define __NR_epoll_create     249
+-#define __NR_epoll_ctl                250
+-#define __NR_epoll_wait               251
+-#define __NR_remap_file_pages 252
+-#define __NR_set_tid_address  253
+-#define __NR_timer_create     254
+-#define __NR_timer_settime    255
+-#define __NR_timer_gettime    256
+-#define __NR_timer_getoverrun 257
+-#define __NR_timer_delete     258
+-#define __NR_clock_settime    259
+-#define __NR_clock_gettime    260
+-#define __NR_clock_getres     261
+-#define __NR_clock_nanosleep  262
+-#define __NR_statfs64         263
+-#define __NR_fstatfs64                264
+-#define __NR_tgkill           265
+-#define __NR_utimes           266
+-#define __NR_fadvise64_64     267
+-#define __NR_mbind            268
+-#define __NR_get_mempolicy    269
+-#define __NR_set_mempolicy    270
+-#define __NR_mq_open          271
+-#define __NR_mq_unlink                272
+-#define __NR_mq_timedsend     273
+-#define __NR_mq_timedreceive  274
+-#define __NR_mq_notify                275
+-#define __NR_mq_getsetattr    276
+-#define __NR_waitid           277
+-#define __NR_vserver          278
+-#define __NR_add_key          279
+-#define __NR_request_key      280
+-#define __NR_keyctl           281
+-#define __NR_ioprio_set               282
+-#define __NR_ioprio_get               283
+-#define __NR_inotify_init     284
+-#define __NR_inotify_add_watch        285
+-#define __NR_inotify_rm_watch 286
+-#define __NR_migrate_pages    287
+-#define __NR_openat           288
+-#define __NR_mkdirat          289
+-#define __NR_mknodat          290
+-#define __NR_fchownat         291
+-#define __NR_futimesat                292
+-#define __NR_fstatat64                293
+-#define __NR_unlinkat         294
+-#define __NR_renameat         295
+-#define __NR_linkat           296
+-#define __NR_symlinkat                297
+-#define __NR_readlinkat               298
+-#define __NR_fchmodat         299
+-#define __NR_faccessat                300
+-#define __NR_pselect6         301
+-#define __NR_ppoll            302
+-#define __NR_unshare          303
+-#define __NR_set_robust_list  304
+-#define __NR_get_robust_list  305
+-#define __NR_splice           306
+-#define __NR_sync_file_range  307
+-#define __NR_tee              308
+-#define __NR_vmsplice         309
+-#define __NR_move_pages               310
+-#define __NR_sched_setaffinity        311
+-#define __NR_sched_getaffinity        312
+-#define __NR_kexec_load               313
+-#define __NR_getcpu           314
+-#define __NR_epoll_pwait      315
+-#define __NR_utimensat                316
+-#define __NR_signalfd         317
+-#define __NR_timerfd_create   318
+-#define __NR_eventfd          319
+-#define __NR_fallocate                320
+-#define __NR_timerfd_settime  321
+-#define __NR_timerfd_gettime  322
+-#define __NR_signalfd4                323
+-#define __NR_eventfd2         324
+-#define __NR_epoll_create1    325
+-#define __NR_dup3             326
+-#define __NR_pipe2            327
+-#define __NR_inotify_init1    328
+-
+-#ifdef __KERNEL__
+-
+-#define NR_syscalls           329
+-
+-#define __ARCH_WANT_IPC_PARSE_VERSION
+-#define __ARCH_WANT_OLD_READDIR
+-#define __ARCH_WANT_OLD_STAT
+-#define __ARCH_WANT_STAT64
+-#define __ARCH_WANT_SYS_ALARM
+-#define __ARCH_WANT_SYS_GETHOSTNAME
+-#define __ARCH_WANT_SYS_PAUSE
+-#define __ARCH_WANT_SYS_SGETMASK
+-#define __ARCH_WANT_SYS_SIGNAL
+-#define __ARCH_WANT_SYS_TIME
+-#define __ARCH_WANT_SYS_UTIME
+-#define __ARCH_WANT_SYS_WAITPID
+-#define __ARCH_WANT_SYS_SOCKETCALL
+-#define __ARCH_WANT_SYS_FADVISE64
+-#define __ARCH_WANT_SYS_GETPGRP
+-#define __ARCH_WANT_SYS_LLSEEK
+-#define __ARCH_WANT_SYS_NICE
+-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+-#define __ARCH_WANT_SYS_OLDUMOUNT
+-#define __ARCH_WANT_SYS_SIGPENDING
+-#define __ARCH_WANT_SYS_SIGPROCMASK
+-#define __ARCH_WANT_SYS_RT_SIGACTION
+-
+-/*
+- * "Conditional" syscalls
+- *
+- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+- * but it doesn't work on all toolchains, so we just do it by hand
+- */
+-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+-
+-#endif /* __KERNEL__ */
+-#endif /* _ASM_M68K_UNISTD_H_ */
++#ifdef __uClinux__
++#include "unistd_no.h"
++#else
++#include "unistd_mm.h"
++#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/unistd_mm.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd_mm.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/unistd_mm.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd_mm.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,372 @@
++#ifndef _ASM_M68K_UNISTD_H_
++#define _ASM_M68K_UNISTD_H_
++
++/*
++ * This file contains the system call numbers.
++ */
++
++#define __NR_restart_syscall    0
++#define __NR_exit               1
++#define __NR_fork               2
++#define __NR_read               3
++#define __NR_write              4
++#define __NR_open               5
++#define __NR_close              6
++#define __NR_waitpid            7
++#define __NR_creat              8
++#define __NR_link               9
++#define __NR_unlink            10
++#define __NR_execve            11
++#define __NR_chdir             12
++#define __NR_time              13
++#define __NR_mknod             14
++#define __NR_chmod             15
++#define __NR_chown             16
++#define __NR_break             17
++#define __NR_oldstat           18
++#define __NR_lseek             19
++#define __NR_getpid            20
++#define __NR_mount             21
++#define __NR_umount            22
++#define __NR_setuid            23
++#define __NR_getuid            24
++#define __NR_stime             25
++#define __NR_ptrace            26
++#define __NR_alarm             27
++#define __NR_oldfstat          28
++#define __NR_pause             29
++#define __NR_utime             30
++#define __NR_stty              31
++#define __NR_gtty              32
++#define __NR_access            33
++#define __NR_nice              34
++#define __NR_ftime             35
++#define __NR_sync              36
++#define __NR_kill              37
++#define __NR_rename            38
++#define __NR_mkdir             39
++#define __NR_rmdir             40
++#define __NR_dup               41
++#define __NR_pipe              42
++#define __NR_times             43
++#define __NR_prof              44
++#define __NR_brk               45
++#define __NR_setgid            46
++#define __NR_getgid            47
++#define __NR_signal            48
++#define __NR_geteuid           49
++#define __NR_getegid           50
++#define __NR_acct              51
++#define __NR_umount2           52
++#define __NR_lock              53
++#define __NR_ioctl             54
++#define __NR_fcntl             55
++#define __NR_mpx               56
++#define __NR_setpgid           57
++#define __NR_ulimit            58
++#define __NR_oldolduname       59
++#define __NR_umask             60
++#define __NR_chroot            61
++#define __NR_ustat             62
++#define __NR_dup2              63
++#define __NR_getppid           64
++#define __NR_getpgrp           65
++#define __NR_setsid            66
++#define __NR_sigaction                 67
++#define __NR_sgetmask          68
++#define __NR_ssetmask          69
++#define __NR_setreuid          70
++#define __NR_setregid          71
++#define __NR_sigsuspend                72
++#define __NR_sigpending                73
++#define __NR_sethostname       74
++#define __NR_setrlimit                 75
++#define __NR_getrlimit                 76
++#define __NR_getrusage                 77
++#define __NR_gettimeofday      78
++#define __NR_settimeofday      79
++#define __NR_getgroups                 80
++#define __NR_setgroups                 81
++#define __NR_select            82
++#define __NR_symlink           83
++#define __NR_oldlstat          84
++#define __NR_readlink          85
++#define __NR_uselib            86
++#define __NR_swapon            87
++#define __NR_reboot            88
++#define __NR_readdir           89
++#define __NR_mmap              90
++#define __NR_munmap            91
++#define __NR_truncate          92
++#define __NR_ftruncate                 93
++#define __NR_fchmod            94
++#define __NR_fchown            95
++#define __NR_getpriority       96
++#define __NR_setpriority       97
++#define __NR_profil            98
++#define __NR_statfs            99
++#define __NR_fstatfs          100
++#define __NR_ioperm           101
++#define __NR_socketcall               102
++#define __NR_syslog           103
++#define __NR_setitimer                104
++#define __NR_getitimer                105
++#define __NR_stat             106
++#define __NR_lstat            107
++#define __NR_fstat            108
++#define __NR_olduname         109
++#define __NR_iopl             /* 110 */ not supported
++#define __NR_vhangup          111
++#define __NR_idle             /* 112 */ Obsolete
++#define __NR_vm86             /* 113 */ not supported
++#define __NR_wait4            114
++#define __NR_swapoff          115
++#define __NR_sysinfo          116
++#define __NR_ipc              117
++#define __NR_fsync            118
++#define __NR_sigreturn                119
++#define __NR_clone            120
++#define __NR_setdomainname    121
++#define __NR_uname            122
++#define __NR_cacheflush               123
++#define __NR_adjtimex         124
++#define __NR_mprotect         125
++#define __NR_sigprocmask      126
++#define __NR_create_module    127
++#define __NR_init_module      128
++#define __NR_delete_module    129
++#define __NR_get_kernel_syms  130
++#define __NR_quotactl         131
++#define __NR_getpgid          132
++#define __NR_fchdir           133
++#define __NR_bdflush          134
++#define __NR_sysfs            135
++#define __NR_personality      136
++#define __NR_afs_syscall      137 /* Syscall for Andrew File System */
++#define __NR_setfsuid         138
++#define __NR_setfsgid         139
++#define __NR__llseek          140
++#define __NR_getdents         141
++#define __NR__newselect               142
++#define __NR_flock            143
++#define __NR_msync            144
++#define __NR_readv            145
++#define __NR_writev           146
++#define __NR_getsid           147
++#define __NR_fdatasync                148
++#define __NR__sysctl          149
++#define __NR_mlock            150
++#define __NR_munlock          151
++#define __NR_mlockall         152
++#define __NR_munlockall               153
++#define __NR_sched_setparam           154
++#define __NR_sched_getparam           155
++#define __NR_sched_setscheduler               156
++#define __NR_sched_getscheduler               157
++#define __NR_sched_yield              158
++#define __NR_sched_get_priority_max   159
++#define __NR_sched_get_priority_min   160
++#define __NR_sched_rr_get_interval    161
++#define __NR_nanosleep                162
++#define __NR_mremap           163
++#define __NR_setresuid                164
++#define __NR_getresuid                165
++#define __NR_getpagesize      166
++#define __NR_query_module     167
++#define __NR_poll             168
++#define __NR_nfsservctl               169
++#define __NR_setresgid                170
++#define __NR_getresgid                171
++#define __NR_prctl            172
++#define __NR_rt_sigreturn     173
++#define __NR_rt_sigaction     174
++#define __NR_rt_sigprocmask   175
++#define __NR_rt_sigpending    176
++#define __NR_rt_sigtimedwait  177
++#define __NR_rt_sigqueueinfo  178
++#define __NR_rt_sigsuspend    179
++#define __NR_pread64          180
++#define __NR_pwrite64         181
++#define __NR_lchown           182
++#define __NR_getcwd           183
++#define __NR_capget           184
++#define __NR_capset           185
++#define __NR_sigaltstack      186
++#define __NR_sendfile         187
++#define __NR_getpmsg          188     /* some people actually want streams */
++#define __NR_putpmsg          189     /* some people actually want streams */
++#define __NR_vfork            190
++#define __NR_ugetrlimit               191
++#define __NR_mmap2            192
++#define __NR_truncate64               193
++#define __NR_ftruncate64      194
++#define __NR_stat64           195
++#define __NR_lstat64          196
++#define __NR_fstat64          197
++#define __NR_chown32          198
++#define __NR_getuid32         199
++#define __NR_getgid32         200
++#define __NR_geteuid32                201
++#define __NR_getegid32                202
++#define __NR_setreuid32               203
++#define __NR_setregid32               204
++#define __NR_getgroups32      205
++#define __NR_setgroups32      206
++#define __NR_fchown32         207
++#define __NR_setresuid32      208
++#define __NR_getresuid32      209
++#define __NR_setresgid32      210
++#define __NR_getresgid32      211
++#define __NR_lchown32         212
++#define __NR_setuid32         213
++#define __NR_setgid32         214
++#define __NR_setfsuid32               215
++#define __NR_setfsgid32               216
++#define __NR_pivot_root               217
++#define __NR_getdents64               220
++#define __NR_gettid           221
++#define __NR_tkill            222
++#define __NR_setxattr         223
++#define __NR_lsetxattr                224
++#define __NR_fsetxattr                225
++#define __NR_getxattr         226
++#define __NR_lgetxattr                227
++#define __NR_fgetxattr                228
++#define __NR_listxattr                229
++#define __NR_llistxattr               230
++#define __NR_flistxattr               231
++#define __NR_removexattr      232
++#define __NR_lremovexattr     233
++#define __NR_fremovexattr     234
++#define __NR_futex            235
++#define __NR_sendfile64               236
++#define __NR_mincore          237
++#define __NR_madvise          238
++#define __NR_fcntl64          239
++#define __NR_readahead                240
++#define __NR_io_setup         241
++#define __NR_io_destroy               242
++#define __NR_io_getevents     243
++#define __NR_io_submit                244
++#define __NR_io_cancel                245
++#define __NR_fadvise64                246
++#define __NR_exit_group               247
++#define __NR_lookup_dcookie   248
++#define __NR_epoll_create     249
++#define __NR_epoll_ctl                250
++#define __NR_epoll_wait               251
++#define __NR_remap_file_pages 252
++#define __NR_set_tid_address  253
++#define __NR_timer_create     254
++#define __NR_timer_settime    255
++#define __NR_timer_gettime    256
++#define __NR_timer_getoverrun 257
++#define __NR_timer_delete     258
++#define __NR_clock_settime    259
++#define __NR_clock_gettime    260
++#define __NR_clock_getres     261
++#define __NR_clock_nanosleep  262
++#define __NR_statfs64         263
++#define __NR_fstatfs64                264
++#define __NR_tgkill           265
++#define __NR_utimes           266
++#define __NR_fadvise64_64     267
++#define __NR_mbind            268
++#define __NR_get_mempolicy    269
++#define __NR_set_mempolicy    270
++#define __NR_mq_open          271
++#define __NR_mq_unlink                272
++#define __NR_mq_timedsend     273
++#define __NR_mq_timedreceive  274
++#define __NR_mq_notify                275
++#define __NR_mq_getsetattr    276
++#define __NR_waitid           277
++#define __NR_vserver          278
++#define __NR_add_key          279
++#define __NR_request_key      280
++#define __NR_keyctl           281
++#define __NR_ioprio_set               282
++#define __NR_ioprio_get               283
++#define __NR_inotify_init     284
++#define __NR_inotify_add_watch        285
++#define __NR_inotify_rm_watch 286
++#define __NR_migrate_pages    287
++#define __NR_openat           288
++#define __NR_mkdirat          289
++#define __NR_mknodat          290
++#define __NR_fchownat         291
++#define __NR_futimesat                292
++#define __NR_fstatat64                293
++#define __NR_unlinkat         294
++#define __NR_renameat         295
++#define __NR_linkat           296
++#define __NR_symlinkat                297
++#define __NR_readlinkat               298
++#define __NR_fchmodat         299
++#define __NR_faccessat                300
++#define __NR_pselect6         301
++#define __NR_ppoll            302
++#define __NR_unshare          303
++#define __NR_set_robust_list  304
++#define __NR_get_robust_list  305
++#define __NR_splice           306
++#define __NR_sync_file_range  307
++#define __NR_tee              308
++#define __NR_vmsplice         309
++#define __NR_move_pages               310
++#define __NR_sched_setaffinity        311
++#define __NR_sched_getaffinity        312
++#define __NR_kexec_load               313
++#define __NR_getcpu           314
++#define __NR_epoll_pwait      315
++#define __NR_utimensat                316
++#define __NR_signalfd         317
++#define __NR_timerfd_create   318
++#define __NR_eventfd          319
++#define __NR_fallocate                320
++#define __NR_timerfd_settime  321
++#define __NR_timerfd_gettime  322
++#define __NR_signalfd4                323
++#define __NR_eventfd2         324
++#define __NR_epoll_create1    325
++#define __NR_dup3             326
++#define __NR_pipe2            327
++#define __NR_inotify_init1    328
++
++#ifdef __KERNEL__
++
++#define NR_syscalls           329
++
++#define __ARCH_WANT_IPC_PARSE_VERSION
++#define __ARCH_WANT_OLD_READDIR
++#define __ARCH_WANT_OLD_STAT
++#define __ARCH_WANT_STAT64
++#define __ARCH_WANT_SYS_ALARM
++#define __ARCH_WANT_SYS_GETHOSTNAME
++#define __ARCH_WANT_SYS_PAUSE
++#define __ARCH_WANT_SYS_SGETMASK
++#define __ARCH_WANT_SYS_SIGNAL
++#define __ARCH_WANT_SYS_TIME
++#define __ARCH_WANT_SYS_UTIME
++#define __ARCH_WANT_SYS_WAITPID
++#define __ARCH_WANT_SYS_SOCKETCALL
++#define __ARCH_WANT_SYS_FADVISE64
++#define __ARCH_WANT_SYS_GETPGRP
++#define __ARCH_WANT_SYS_LLSEEK
++#define __ARCH_WANT_SYS_NICE
++#define __ARCH_WANT_SYS_OLD_GETRLIMIT
++#define __ARCH_WANT_SYS_OLDUMOUNT
++#define __ARCH_WANT_SYS_SIGPENDING
++#define __ARCH_WANT_SYS_SIGPROCMASK
++#define __ARCH_WANT_SYS_RT_SIGACTION
++
++/*
++ * "Conditional" syscalls
++ *
++ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
++ * but it doesn't work on all toolchains, so we just do it by hand
++ */
++#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
++
++#endif /* __KERNEL__ */
++#endif /* _ASM_M68K_UNISTD_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68k/include/asm/unistd_no.h linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd_no.h
+--- linux-2.6.29.owrt/arch/m68k/include/asm/unistd_no.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/m68k/include/asm/unistd_no.h    2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,372 @@
++#ifndef _ASM_M68K_UNISTD_H_
++#define _ASM_M68K_UNISTD_H_
++
++/*
++ * This file contains the system call numbers.
++ */
++
++#define __NR_restart_syscall      0
++#define __NR_exit               1
++#define __NR_fork               2
++#define __NR_read               3
++#define __NR_write              4
++#define __NR_open               5
++#define __NR_close              6
++#define __NR_waitpid            7
++#define __NR_creat              8
++#define __NR_link               9
++#define __NR_unlink            10
++#define __NR_execve            11
++#define __NR_chdir             12
++#define __NR_time              13
++#define __NR_mknod             14
++#define __NR_chmod             15
++#define __NR_chown             16
++#define __NR_break             17
++#define __NR_oldstat           18
++#define __NR_lseek             19
++#define __NR_getpid            20
++#define __NR_mount             21
++#define __NR_umount            22
++#define __NR_setuid            23
++#define __NR_getuid            24
++#define __NR_stime             25
++#define __NR_ptrace            26
++#define __NR_alarm             27
++#define __NR_oldfstat          28
++#define __NR_pause             29
++#define __NR_utime             30
++#define __NR_stty              31
++#define __NR_gtty              32
++#define __NR_access            33
++#define __NR_nice              34
++#define __NR_ftime             35
++#define __NR_sync              36
++#define __NR_kill              37
++#define __NR_rename            38
++#define __NR_mkdir             39
++#define __NR_rmdir             40
++#define __NR_dup               41
++#define __NR_pipe              42
++#define __NR_times             43
++#define __NR_prof              44
++#define __NR_brk               45
++#define __NR_setgid            46
++#define __NR_getgid            47
++#define __NR_signal            48
++#define __NR_geteuid           49
++#define __NR_getegid           50
++#define __NR_acct              51
++#define __NR_umount2           52
++#define __NR_lock              53
++#define __NR_ioctl             54
++#define __NR_fcntl             55
++#define __NR_mpx               56
++#define __NR_setpgid           57
++#define __NR_ulimit            58
++#define __NR_oldolduname       59
++#define __NR_umask             60
++#define __NR_chroot            61
++#define __NR_ustat             62
++#define __NR_dup2              63
++#define __NR_getppid           64
++#define __NR_getpgrp           65
++#define __NR_setsid            66
++#define __NR_sigaction                 67
++#define __NR_sgetmask          68
++#define __NR_ssetmask          69
++#define __NR_setreuid          70
++#define __NR_setregid          71
++#define __NR_sigsuspend                72
++#define __NR_sigpending                73
++#define __NR_sethostname       74
++#define __NR_setrlimit                 75
++#define __NR_getrlimit                 76
++#define __NR_getrusage                 77
++#define __NR_gettimeofday      78
++#define __NR_settimeofday      79
++#define __NR_getgroups                 80
++#define __NR_setgroups                 81
++#define __NR_select            82
++#define __NR_symlink           83
++#define __NR_oldlstat          84
++#define __NR_readlink          85
++#define __NR_uselib            86
++#define __NR_swapon            87
++#define __NR_reboot            88
++#define __NR_readdir           89
++#define __NR_mmap              90
++#define __NR_munmap            91
++#define __NR_truncate          92
++#define __NR_ftruncate                 93
++#define __NR_fchmod            94
++#define __NR_fchown            95
++#define __NR_getpriority       96
++#define __NR_setpriority       97
++#define __NR_profil            98
++#define __NR_statfs            99
++#define __NR_fstatfs          100
++#define __NR_ioperm           101
++#define __NR_socketcall               102
++#define __NR_syslog           103
++#define __NR_setitimer                104
++#define __NR_getitimer                105
++#define __NR_stat             106
++#define __NR_lstat            107
++#define __NR_fstat            108
++#define __NR_olduname         109
++#define __NR_iopl             /* 110 */ not supported
++#define __NR_vhangup          111
++#define __NR_idle             /* 112 */ Obsolete
++#define __NR_vm86             /* 113 */ not supported
++#define __NR_wait4            114
++#define __NR_swapoff          115
++#define __NR_sysinfo          116
++#define __NR_ipc              117
++#define __NR_fsync            118
++#define __NR_sigreturn                119
++#define __NR_clone            120
++#define __NR_setdomainname    121
++#define __NR_uname            122
++#define __NR_cacheflush               123
++#define __NR_adjtimex         124
++#define __NR_mprotect         125
++#define __NR_sigprocmask      126
++#define __NR_create_module    127
++#define __NR_init_module      128
++#define __NR_delete_module    129
++#define __NR_get_kernel_syms  130
++#define __NR_quotactl         131
++#define __NR_getpgid          132
++#define __NR_fchdir           133
++#define __NR_bdflush          134
++#define __NR_sysfs            135
++#define __NR_personality      136
++#define __NR_afs_syscall      137 /* Syscall for Andrew File System */
++#define __NR_setfsuid         138
++#define __NR_setfsgid         139
++#define __NR__llseek          140
++#define __NR_getdents         141
++#define __NR__newselect               142
++#define __NR_flock            143
++#define __NR_msync            144
++#define __NR_readv            145
++#define __NR_writev           146
++#define __NR_getsid           147
++#define __NR_fdatasync                148
++#define __NR__sysctl          149
++#define __NR_mlock            150
++#define __NR_munlock          151
++#define __NR_mlockall         152
++#define __NR_munlockall               153
++#define __NR_sched_setparam           154
++#define __NR_sched_getparam           155
++#define __NR_sched_setscheduler               156
++#define __NR_sched_getscheduler               157
++#define __NR_sched_yield              158
++#define __NR_sched_get_priority_max   159
++#define __NR_sched_get_priority_min   160
++#define __NR_sched_rr_get_interval    161
++#define __NR_nanosleep                162
++#define __NR_mremap           163
++#define __NR_setresuid                164
++#define __NR_getresuid                165
++#define __NR_getpagesize      166
++#define __NR_query_module     167
++#define __NR_poll             168
++#define __NR_nfsservctl               169
++#define __NR_setresgid                170
++#define __NR_getresgid                171
++#define __NR_prctl            172
++#define __NR_rt_sigreturn     173
++#define __NR_rt_sigaction     174
++#define __NR_rt_sigprocmask   175
++#define __NR_rt_sigpending    176
++#define __NR_rt_sigtimedwait  177
++#define __NR_rt_sigqueueinfo  178
++#define __NR_rt_sigsuspend    179
++#define __NR_pread64          180
++#define __NR_pwrite64         181
++#define __NR_lchown           182
++#define __NR_getcwd           183
++#define __NR_capget           184
++#define __NR_capset           185
++#define __NR_sigaltstack      186
++#define __NR_sendfile         187
++#define __NR_getpmsg          188     /* some people actually want streams */
++#define __NR_putpmsg          189     /* some people actually want streams */
++#define __NR_vfork            190
++#define __NR_ugetrlimit               191
++#define __NR_mmap2            192
++#define __NR_truncate64               193
++#define __NR_ftruncate64      194
++#define __NR_stat64           195
++#define __NR_lstat64          196
++#define __NR_fstat64          197
++#define __NR_chown32          198
++#define __NR_getuid32         199
++#define __NR_getgid32         200
++#define __NR_geteuid32                201
++#define __NR_getegid32                202
++#define __NR_setreuid32               203
++#define __NR_setregid32               204
++#define __NR_getgroups32      205
++#define __NR_setgroups32      206
++#define __NR_fchown32         207
++#define __NR_setresuid32      208
++#define __NR_getresuid32      209
++#define __NR_setresgid32      210
++#define __NR_getresgid32      211
++#define __NR_lchown32         212
++#define __NR_setuid32         213
++#define __NR_setgid32         214
++#define __NR_setfsuid32               215
++#define __NR_setfsgid32               216
++#define __NR_pivot_root               217
++#define __NR_getdents64               220
++#define __NR_gettid           221
++#define __NR_tkill            222
++#define __NR_setxattr         223
++#define __NR_lsetxattr                224
++#define __NR_fsetxattr                225
++#define __NR_getxattr         226
++#define __NR_lgetxattr                227
++#define __NR_fgetxattr                228
++#define __NR_listxattr                229
++#define __NR_llistxattr               230
++#define __NR_flistxattr               231
++#define __NR_removexattr      232
++#define __NR_lremovexattr     233
++#define __NR_fremovexattr     234
++#define __NR_futex            235
++#define __NR_sendfile64               236
++#define __NR_mincore          237
++#define __NR_madvise          238
++#define __NR_fcntl64          239
++#define __NR_readahead                240
++#define __NR_io_setup         241
++#define __NR_io_destroy               242
++#define __NR_io_getevents     243
++#define __NR_io_submit                244
++#define __NR_io_cancel                245
++#define __NR_fadvise64                246
++#define __NR_exit_group               247
++#define __NR_lookup_dcookie   248
++#define __NR_epoll_create     249
++#define __NR_epoll_ctl                250
++#define __NR_epoll_wait               251
++#define __NR_remap_file_pages 252
++#define __NR_set_tid_address  253
++#define __NR_timer_create     254
++#define __NR_timer_settime    255
++#define __NR_timer_gettime    256
++#define __NR_timer_getoverrun 257
++#define __NR_timer_delete     258
++#define __NR_clock_settime    259
++#define __NR_clock_gettime    260
++#define __NR_clock_getres     261
++#define __NR_clock_nanosleep  262
++#define __NR_statfs64         263
++#define __NR_fstatfs64                264
++#define __NR_tgkill           265
++#define __NR_utimes           266
++#define __NR_fadvise64_64     267
++#define __NR_mbind            268
++#define __NR_get_mempolicy    269
++#define __NR_set_mempolicy    270
++#define __NR_mq_open          271
++#define __NR_mq_unlink                272
++#define __NR_mq_timedsend     273
++#define __NR_mq_timedreceive  274
++#define __NR_mq_notify                275
++#define __NR_mq_getsetattr    276
++#define __NR_waitid           277
++#define __NR_vserver          278
++#define __NR_add_key          279
++#define __NR_request_key      280
++#define __NR_keyctl           281
++#define __NR_ioprio_set               282
++#define __NR_ioprio_get               283
++#define __NR_inotify_init     284
++#define __NR_inotify_add_watch        285
++#define __NR_inotify_rm_watch 286
++#define __NR_migrate_pages    287
++#define __NR_openat           288
++#define __NR_mkdirat          289
++#define __NR_mknodat          290
++#define __NR_fchownat         291
++#define __NR_futimesat                292
++#define __NR_fstatat64                293
++#define __NR_unlinkat         294
++#define __NR_renameat         295
++#define __NR_linkat           296
++#define __NR_symlinkat                297
++#define __NR_readlinkat               298
++#define __NR_fchmodat         299
++#define __NR_faccessat                300
++#define __NR_pselect6         301
++#define __NR_ppoll            302
++#define __NR_unshare          303
++#define __NR_set_robust_list  304
++#define __NR_get_robust_list  305
++#define __NR_splice           306
++#define __NR_sync_file_range  307
++#define __NR_tee              308
++#define __NR_vmsplice         309
++#define __NR_move_pages               310
++#define __NR_sched_setaffinity        311
++#define __NR_sched_getaffinity        312
++#define __NR_kexec_load               313
++#define __NR_getcpu           314
++#define __NR_epoll_pwait      315
++#define __NR_utimensat                316
++#define __NR_signalfd         317
++#define __NR_timerfd_create   318
++#define __NR_eventfd          319
++#define __NR_fallocate                320
++#define __NR_timerfd_settime  321
++#define __NR_timerfd_gettime  322
++#define __NR_signalfd4                323
++#define __NR_eventfd2         324
++#define __NR_epoll_create1    325
++#define __NR_dup3             326
++#define __NR_pipe2            327
++#define __NR_inotify_init1    328
++
++#ifdef __KERNEL__
++
++#define NR_syscalls           329
++
++#define __ARCH_WANT_IPC_PARSE_VERSION
++#define __ARCH_WANT_OLD_READDIR
++#define __ARCH_WANT_OLD_STAT
++#define __ARCH_WANT_STAT64
++#define __ARCH_WANT_SYS_ALARM
++#define __ARCH_WANT_SYS_GETHOSTNAME
++#define __ARCH_WANT_SYS_PAUSE
++#define __ARCH_WANT_SYS_SGETMASK
++#define __ARCH_WANT_SYS_SIGNAL
++#define __ARCH_WANT_SYS_TIME
++#define __ARCH_WANT_SYS_UTIME
++#define __ARCH_WANT_SYS_WAITPID
++#define __ARCH_WANT_SYS_SOCKETCALL
++#define __ARCH_WANT_SYS_FADVISE64
++#define __ARCH_WANT_SYS_GETPGRP
++#define __ARCH_WANT_SYS_LLSEEK
++#define __ARCH_WANT_SYS_NICE
++#define __ARCH_WANT_SYS_OLD_GETRLIMIT
++#define __ARCH_WANT_SYS_OLDUMOUNT
++#define __ARCH_WANT_SYS_SIGPENDING
++#define __ARCH_WANT_SYS_SIGPROCMASK
++#define __ARCH_WANT_SYS_RT_SIGACTION
++
++/*
++ * "Conditional" syscalls
++ *
++ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
++ * but it doesn't work on all toolchains, so we just do it by hand
++ */
++#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
++
++#endif /* __KERNEL__ */
++#endif /* _ASM_M68K_UNISTD_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68knommu/platform/5206e/config.c linux-2.6.29-rc3.owrt/arch/m68knommu/platform/5206e/config.c
+--- linux-2.6.29.owrt/arch/m68knommu/platform/5206e/config.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68knommu/platform/5206e/config.c       2009-05-10 23:48:28.000000000 +0200
+@@ -17,7 +17,6 @@
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+ #include <asm/mcfdma.h>
+-#include <asm/mcfuart.h>
+ /***************************************************************************/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/m68knommu/platform/528x/config.c linux-2.6.29-rc3.owrt/arch/m68knommu/platform/528x/config.c
+--- linux-2.6.29.owrt/arch/m68knommu/platform/528x/config.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/m68knommu/platform/528x/config.c        2009-05-10 23:48:28.000000000 +0200
+@@ -24,6 +24,7 @@
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+ #include <asm/mcfuart.h>
++#include <asm/mcfqspi.h>
+ #ifdef CONFIG_MTD_PARTITIONS
+ #include <linux/mtd/partitions.h>
+@@ -32,6 +33,233 @@
+ /***************************************************************************/
+ void coldfire_reset(void);
++static void coldfire_qspi_cs_control(u8 cs, u8 command);
++
++/***************************************************************************/
++
++#if defined(CONFIG_SPI)
++
++#if defined(CONFIG_WILDFIRE)
++#define SPI_NUM_CHIPSELECTS   0x02
++#define SPI_PAR_VAL           0x07  /* Enable DIN, DOUT, CLK */
++#define SPI_CS_MASK           0x18
++
++#define FLASH_BLOCKSIZE               (1024*64)
++#define FLASH_NUMBLOCKS               16
++#define FLASH_TYPE            "m25p80"
++
++#define M25P80_CS             0
++#define MMC_CS                        1
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition stm25p_partitions[] = {
++      /* sflash */
++      [0] = {
++              .name = "stm25p80",
++              .offset = 0x00000000,
++              .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
++              .mask_flags = 0
++      }
++};
++
++#endif
++
++#elif defined(CONFIG_WILDFIREMOD)
++
++#define SPI_NUM_CHIPSELECTS   0x08
++#define SPI_PAR_VAL           0x07  /* Enable DIN, DOUT, CLK */
++#define SPI_CS_MASK           0x78
++
++#define FLASH_BLOCKSIZE               (1024*64)
++#define FLASH_NUMBLOCKS               64
++#define FLASH_TYPE            "m25p32"
++/* Reserve 1M for the kernel parition */
++#define FLASH_KERNEL_SIZE   (1024 * 1024)
++
++#define M25P80_CS             5
++#define MMC_CS                        6
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition stm25p_partitions[] = {
++      /* sflash */
++      [0] = {
++              .name = "kernel",
++              .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
++              .size = FLASH_KERNEL_SIZE,
++              .mask_flags = 0
++      },
++      [1] = {
++              .name = "image",
++              .offset = 0x00000000,
++              .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
++              .mask_flags = 0
++      },
++      [2] = {
++              .name = "all",
++              .offset = 0x00000000,
++              .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
++              .mask_flags = 0
++      }
++};
++#endif
++
++#else
++#define SPI_NUM_CHIPSELECTS   0x04
++#define SPI_PAR_VAL           0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
++#endif
++
++#ifdef MMC_CS
++static struct coldfire_spi_chip flash_chip_info = {
++      .mode = SPI_MODE_0,
++      .bits_per_word = 16,
++      .del_cs_to_clk = 17,
++      .del_after_trans = 1,
++      .void_write_data = 0
++};
++
++static struct coldfire_spi_chip mmc_chip_info = {
++      .mode = SPI_MODE_0,
++      .bits_per_word = 16,
++      .del_cs_to_clk = 17,
++      .del_after_trans = 1,
++      .void_write_data = 0xFFFF
++};
++#endif
++
++#ifdef M25P80_CS
++static struct flash_platform_data stm25p80_platform_data = {
++      .name = "ST M25P80 SPI Flash chip",
++#ifdef CONFIG_MTD_PARTITIONS
++      .parts = stm25p_partitions,
++      .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
++#endif
++      .type = FLASH_TYPE
++};
++#endif
++
++static struct spi_board_info spi_board_info[] __initdata = {
++#ifdef M25P80_CS
++      {
++              .modalias = "m25p80",
++              .max_speed_hz = 16000000,
++              .bus_num = 1,
++              .chip_select = M25P80_CS,
++              .platform_data = &stm25p80_platform_data,
++              .controller_data = &flash_chip_info
++      },
++#endif
++#ifdef MMC_CS
++      {
++              .modalias = "mmc_spi",
++              .max_speed_hz = 16000000,
++              .bus_num = 1,
++              .chip_select = MMC_CS,
++              .controller_data = &mmc_chip_info
++      }
++#endif
++};
++
++static struct coldfire_spi_master coldfire_master_info = {
++      .bus_num = 1,
++      .num_chipselect = SPI_NUM_CHIPSELECTS,
++      .irq_source = MCF5282_QSPI_IRQ_SOURCE,
++      .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
++      .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
++      .irq_lp = 0x2B,  /* Level 5 and Priority 3 */
++      .par_val = SPI_PAR_VAL,
++      .cs_control = coldfire_qspi_cs_control,
++};
++
++static struct resource coldfire_spi_resources[] = {
++      [0] = {
++              .name = "qspi-par",
++              .start = MCF5282_QSPI_PAR,
++              .end = MCF5282_QSPI_PAR,
++              .flags = IORESOURCE_MEM
++      },
++
++      [1] = {
++              .name = "qspi-module",
++              .start = MCF5282_QSPI_QMR,
++              .end = MCF5282_QSPI_QMR + 0x18,
++              .flags = IORESOURCE_MEM
++      },
++
++      [2] = {
++              .name = "qspi-int-level",
++              .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
++              .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
++              .flags = IORESOURCE_MEM
++      },
++
++      [3] = {
++              .name = "qspi-int-mask",
++              .start = MCF5282_INTC0 + MCFINTC_IMRL,
++              .end = MCF5282_INTC0 + MCFINTC_IMRL,
++              .flags = IORESOURCE_MEM
++      }
++};
++
++static struct platform_device coldfire_spi = {
++      .name = "spi_coldfire",
++      .id = -1,
++      .resource = coldfire_spi_resources,
++      .num_resources = ARRAY_SIZE(coldfire_spi_resources),
++      .dev = {
++              .platform_data = &coldfire_master_info,
++      }
++};
++
++static void coldfire_qspi_cs_control(u8 cs, u8 command)
++{
++      u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
++
++#if defined(CONFIG_WILDFIRE)
++      u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
++#endif
++#if defined(CONFIG_WILDFIREMOD)
++      u8 cs_mask = (cs << 3) & SPI_CS_MASK;
++#endif
++
++      /*
++       * Don't do anything if the chip select is not
++       * one of the port qs pins.
++       */
++      if (command & QSPI_CS_INIT) {
++#if defined(CONFIG_WILDFIRE)
++              MCF5282_GPIO_DDRQS  |= cs_bit;
++              MCF5282_GPIO_PQSPAR &= ~cs_bit;
++#endif
++
++#if defined(CONFIG_WILDFIREMOD)
++              MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
++              MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
++#endif
++      }
++
++      if (command & QSPI_CS_ASSERT) {
++              MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
++              MCF5282_GPIO_PORTQS |= cs_mask;
++      } else if (command & QSPI_CS_DROP) {
++              MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
++      }
++}
++
++static int __init spi_dev_init(void)
++{
++      int retval;
++
++      retval = platform_device_register(&coldfire_spi);
++      if (retval < 0)
++              return retval;
++
++      if (ARRAY_SIZE(spi_board_info))
++              retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
++
++      return retval;
++}
++
++#endif /* CONFIG_SPI */
+ /***************************************************************************/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/alchemy/common/time.c linux-2.6.29-rc3.owrt/arch/mips/alchemy/common/time.c
+--- linux-2.6.29.owrt/arch/mips/alchemy/common/time.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/alchemy/common/time.c      2009-05-10 23:48:28.000000000 +0200
+@@ -89,7 +89,7 @@
+       .irq            = AU1000_RTC_MATCH2_INT,
+       .set_next_event = au1x_rtcmatch2_set_next_event,
+       .set_mode       = au1x_rtcmatch2_set_mode,
+-      .cpumask        = CPU_MASK_ALL_PTR,
++      .cpumask        = CPU_MASK_ALL,
+ };
+ static struct irqaction au1x_rtcmatch2_irqaction = {
+@@ -118,7 +118,7 @@
+        * setup counter 1 (RTC) to tick at full speed
+        */
+       t = 0xffffff;
+-      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
++      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+               asm volatile ("nop");
+       if (!t)
+               goto cntr_err;
+@@ -127,7 +127,7 @@
+       au_sync();
+       t = 0xffffff;
+-      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
++      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+               asm volatile ("nop");
+       if (!t)
+               goto cntr_err;
+@@ -135,7 +135,7 @@
+       au_sync();
+       t = 0xffffff;
+-      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
++      while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+               asm volatile ("nop");
+       if (!t)
+               goto cntr_err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/cavium-octeon/setup.c linux-2.6.29-rc3.owrt/arch/mips/cavium-octeon/setup.c
+--- linux-2.6.29.owrt/arch/mips/cavium-octeon/setup.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/cavium-octeon/setup.c      2009-05-10 23:48:28.000000000 +0200
+@@ -15,11 +15,13 @@
+ #include <linux/serial.h>
+ #include <linux/types.h>
+ #include <linux/string.h>     /* for memset */
++#include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/time.h>
+ #include <linux/platform_device.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_8250.h>
++#include <linux/string.h>
+ #include <asm/processor.h>
+ #include <asm/reboot.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/configs/emma2rh_defconfig linux-2.6.29-rc3.owrt/arch/mips/configs/emma2rh_defconfig
+--- linux-2.6.29.owrt/arch/mips/configs/emma2rh_defconfig      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/mips/configs/emma2rh_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,1439 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.20
++# Tue Feb 20 21:47:29 2007
++#
++CONFIG_MIPS=y
++
++#
++# Machine selection
++#
++CONFIG_ZONE_DMA=y
++# CONFIG_MIPS_MTX1 is not set
++# CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_PB1000 is not set
++# CONFIG_MIPS_PB1100 is not set
++# CONFIG_MIPS_PB1500 is not set
++# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
++# CONFIG_MIPS_DB1000 is not set
++# CONFIG_MIPS_DB1100 is not set
++# CONFIG_MIPS_DB1500 is not set
++# CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
++# CONFIG_MIPS_MIRAGE is not set
++# CONFIG_BASLER_EXCITE is not set
++# CONFIG_MIPS_COBALT is not set
++# CONFIG_MACH_DECSTATION is not set
++# CONFIG_MACH_JAZZ is not set
++# CONFIG_MIPS_MALTA is not set
++# CONFIG_WR_PPMC is not set
++# CONFIG_MIPS_SIM is not set
++# CONFIG_MOMENCO_JAGUAR_ATX is not set
++# CONFIG_MIPS_XXS1500 is not set
++# CONFIG_PNX8550_JBS is not set
++# CONFIG_PNX8550_STB810 is not set
++# CONFIG_MACH_VR41XX is not set
++# CONFIG_PMC_YOSEMITE is not set
++CONFIG_MARKEINS=y
++# CONFIG_SGI_IP22 is not set
++# CONFIG_SGI_IP27 is not set
++# CONFIG_SGI_IP32 is not set
++# CONFIG_SIBYTE_BIGSUR is not set
++# CONFIG_SIBYTE_SWARM is not set
++# CONFIG_SIBYTE_SENTOSA is not set
++# CONFIG_SIBYTE_RHONE is not set
++# CONFIG_SIBYTE_CARMEL is not set
++# CONFIG_SIBYTE_LITTLESUR is not set
++# CONFIG_SIBYTE_CRHINE is not set
++# CONFIG_SIBYTE_CRHONE is not set
++# CONFIG_SNI_RM is not set
++# CONFIG_TOSHIBA_JMR3927 is not set
++# CONFIG_TOSHIBA_RBTX4927 is not set
++# CONFIG_TOSHIBA_RBTX4938 is not set
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_TIME=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
++CONFIG_DMA_NONCOHERENT=y
++CONFIG_DMA_NEED_PCI_MAP_STATE=y
++CONFIG_CPU_BIG_ENDIAN=y
++# CONFIG_CPU_LITTLE_ENDIAN is not set
++CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
++CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
++CONFIG_IRQ_CPU=y
++CONFIG_SWAP_IO_SPACE=y
++CONFIG_EMMA2RH=y
++CONFIG_MIPS_L1_CACHE_SHIFT=5
++
++#
++# CPU selection
++#
++# CONFIG_CPU_MIPS32_R1 is not set
++# CONFIG_CPU_MIPS32_R2 is not set
++# CONFIG_CPU_MIPS64_R1 is not set
++# CONFIG_CPU_MIPS64_R2 is not set
++# CONFIG_CPU_R3000 is not set
++# CONFIG_CPU_TX39XX is not set
++# CONFIG_CPU_VR41XX is not set
++# CONFIG_CPU_R4300 is not set
++# CONFIG_CPU_R4X00 is not set
++# CONFIG_CPU_TX49XX is not set
++CONFIG_CPU_R5000=y
++# CONFIG_CPU_R5432 is not set
++# CONFIG_CPU_R6000 is not set
++# CONFIG_CPU_NEVADA is not set
++# CONFIG_CPU_R8000 is not set
++# CONFIG_CPU_R10000 is not set
++# CONFIG_CPU_RM7000 is not set
++# CONFIG_CPU_RM9000 is not set
++# CONFIG_CPU_SB1 is not set
++CONFIG_SYS_HAS_CPU_R5000=y
++CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
++CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
++CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
++
++#
++# Kernel type
++#
++CONFIG_32BIT=y
++# CONFIG_64BIT is not set
++CONFIG_PAGE_SIZE_4KB=y
++# CONFIG_PAGE_SIZE_8KB is not set
++# CONFIG_PAGE_SIZE_16KB is not set
++# CONFIG_PAGE_SIZE_64KB is not set
++CONFIG_MIPS_MT_DISABLED=y
++# CONFIG_MIPS_MT_SMP is not set
++# CONFIG_MIPS_MT_SMTC is not set
++# CONFIG_MIPS_VPE_LOADER is not set
++# CONFIG_64BIT_PHYS_ADDR is not set
++CONFIG_CPU_HAS_LLSC=y
++CONFIG_CPU_HAS_SYNC=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++# CONFIG_HZ_48 is not set
++# CONFIG_HZ_100 is not set
++# CONFIG_HZ_128 is not set
++# CONFIG_HZ_250 is not set
++# CONFIG_HZ_256 is not set
++CONFIG_HZ_1000=y
++# CONFIG_HZ_1024 is not set
++CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
++CONFIG_HZ=1000
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
++CONFIG_PREEMPT=y
++CONFIG_PREEMPT_BKL=y
++# CONFIG_KEXEC is not set
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# Bus options (PCI, PCMCIA, EISA, ISA, TC)
++#
++CONFIG_HW_HAS_PCI=y
++CONFIG_PCI=y
++CONFIG_MMU=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# PCI Hotplug Support
++#
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_TRAD_SIGNALS=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++# CONFIG_PM_SYSFS_DEPRECATED is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++CONFIG_XFRM_MIGRATE=y
++CONFIG_NET_KEY=y
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++CONFIG_TCP_MD5SIG=y
++
++#
++# IP: Virtual Server Configuration
++#
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_INET6_AH is not set
++# CONFIG_INET6_ESP is not set
++# CONFIG_INET6_IPCOMP is not set
++CONFIG_IPV6_MIP6=y
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++# CONFIG_IPV6_TUNNEL is not set
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_SUBTREES=y
++CONFIG_NETWORK_SECMARK=y
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK is not set
++CONFIG_NF_CONNTRACK_ENABLED=m
++CONFIG_NF_CONNTRACK_SUPPORT=y
++# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++CONFIG_NF_CONNTRACK_SECMARK=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_SECMARK=m
++CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_IPRANGE=m
++CONFIG_IP_NF_MATCH_TOS=m
++CONFIG_IP_NF_MATCH_RECENT=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_MATCH_OWNER=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_SAME=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++CONFIG_NF_NAT_AMANDA=m
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_TOS=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration (EXPERIMENTAL)
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++# CONFIG_IP6_NF_QUEUE is not set
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_OWNER=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_RAW=m
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++CONFIG_NET_CLS_ROUTE=y
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++CONFIG_FIB_RULES=y
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=m
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x1e000000
++CONFIG_MTD_PHYSMAP_LEN=0x02000000
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNPACPI is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_RAM is not set
++# CONFIG_BLK_DEV_INITRD is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# Misc devices
++#
++CONFIG_SGI_IOC4=m
++# CONFIG_TIFM_CORE is not set
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_TGT=m
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_SCAN_ASYNC=y
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++CONFIG_SCSI_SAS_ATTRS=m
++CONFIG_SCSI_SAS_LIBSAS=m
++# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++CONFIG_SCSI_AIC94XX=m
++# CONFIG_AIC94XX_DEBUG is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++# CONFIG_FUSION_SPI is not set
++# CONFIG_FUSION_FC is not set
++# CONFIG_FUSION_SAS is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_IEEE1394 is not set
++
++#
++# I2O device support
++#
++# CONFIG_I2O is not set
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++
++#
++# ARCnet devices
++#
++# CONFIG_ARCNET is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_DM9000 is not set
++
++#
++# Tulip family network device support
++#
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_DGRS is not set
++# CONFIG_EEPRO100 is not set
++# CONFIG_E100 is not set
++# CONFIG_FEALNX is not set
++CONFIG_NATSEMI=y
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_QLA3XXX=m
++# CONFIG_ATL1 is not set
++
++#
++# Ethernet (10000 Mbit)
++#
++# CONFIG_CHELSIO_T1 is not set
++CONFIG_CHELSIO_T3=m
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++CONFIG_NETXEN_NIC=m
++
++#
++# Token Ring devices
++#
++# CONFIG_TR is not set
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++# CONFIG_PPP_BSDCOMP is not set
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Telephony Support
++#
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_RTC=m
++# CONFIG_GEN_RTC is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_DRM is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PASEMI is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++# CONFIG_I2C_PCA_ISA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++CONFIG_I2C_DEBUG_CORE=y
++# CONFIG_I2C_DEBUG_ALGO is not set
++CONFIG_I2C_DEBUG_BUS=y
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ASB100 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_FSCHER is not set
++# CONFIG_SENSORS_FSCPOS is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# InfiniBand support
++#
++# CONFIG_INFINIBAND is not set
++
++#
++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++#
++
++#
++# Real Time Clock
++#
++# CONFIG_RTC_CLASS is not set
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# Auxiliary Display support
++#
++
++#
++# Virtualization
++#
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_XFS_FS=m
++# CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_SECURITY is not set
++# CONFIG_XFS_POSIX_ACL is not set
++# CONFIG_XFS_RT is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=m
++# CONFIG_FUSE_FS is not set
++CONFIG_GENERIC_ACL=y
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++# CONFIG_NTFS_RW is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=m
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_JFFS2_CMODE_NONE is not set
++CONFIG_JFFS2_CMODE_PRIORITY=y
++# CONFIG_JFFS2_CMODE_SIZE is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_NFS_DIRECTIO=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT=""
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++
++#
++# Distributed Lock Manager
++#
++CONFIG_DLM=m
++CONFIG_DLM_TCP=y
++# CONFIG_DLM_SCTP is not set
++# CONFIG_DLM_DEBUG is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_CROSSCOMPILE=y
++CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_FCRYPT=m
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++CONFIG_CRYPTO_CAMELLIA=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/configs/ip27_defconfig linux-2.6.29-rc3.owrt/arch/mips/configs/ip27_defconfig
+--- linux-2.6.29.owrt/arch/mips/configs/ip27_defconfig 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/configs/ip27_defconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -53,7 +53,7 @@
+ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+ CONFIG_ARC=y
+-CONFIG_DMA_COHERENT=y
++CONFIG_DMA_IP27=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_SYS_HAS_EARLY_PRINTK=y
+ # CONFIG_NO_IOPORT is not set
+@@ -512,7 +512,7 @@
+ CONFIG_MD_RAID0=y
+ CONFIG_MD_RAID1=y
+ CONFIG_MD_RAID10=m
+-CONFIG_MD_RAID456=y
++CONFIG_MD_RAID456=m
+ CONFIG_MD_RAID5_RESHAPE=y
+ CONFIG_MD_MULTIPATH=m
+ CONFIG_MD_FAULTY=m
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/configs/jmr3927_defconfig linux-2.6.29-rc3.owrt/arch/mips/configs/jmr3927_defconfig
+--- linux-2.6.29.owrt/arch/mips/configs/jmr3927_defconfig      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/configs/jmr3927_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc7
+-# Wed Mar  4 23:07:16 2009
++# Linux kernel version: 2.6.26-rc9
++# Fri Jul 11 23:01:36 2008
+ #
+ CONFIG_MIPS=y
+@@ -18,10 +18,8 @@
+ # CONFIG_LEMOTE_FULONG is not set
+ # CONFIG_MIPS_MALTA is not set
+ # CONFIG_MIPS_SIM is not set
+-# CONFIG_MACH_EMMA is not set
++# CONFIG_MARKEINS is not set
+ # CONFIG_MACH_VR41XX is not set
+-# CONFIG_NXP_STB220 is not set
+-# CONFIG_NXP_STB225 is not set
+ # CONFIG_PNX8550_JBS is not set
+ # CONFIG_PNX8550_STB810 is not set
+ # CONFIG_PMC_MSP is not set
+@@ -41,11 +39,7 @@
+ # CONFIG_SNI_RM is not set
+ CONFIG_MACH_TX39XX=y
+ # CONFIG_MACH_TX49XX is not set
+-# CONFIG_MIKROTIK_RB532 is not set
+ # CONFIG_WR_PPMC is not set
+-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+-CONFIG_MACH_TXX9=y
+ CONFIG_TOSHIBA_JMR3927=y
+ CONFIG_SOC_TX3927=y
+ # CONFIG_TOSHIBA_FPCIB0 is not set
+@@ -60,14 +54,12 @@
+ CONFIG_GENERIC_CLOCKEVENTS=y
+ CONFIG_GENERIC_TIME=y
+ CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+ CONFIG_CEVT_TXX9=y
+ CONFIG_GPIO_TXX9=y
+ CONFIG_DMA_NONCOHERENT=y
+ CONFIG_DMA_NEED_PCI_MAP_STATE=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_SYS_HAS_EARLY_PRINTK=y
+ # CONFIG_HOTPLUG_CPU is not set
+ # CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_GPIO=y
+@@ -95,7 +87,6 @@
+ # CONFIG_CPU_TX49XX is not set
+ # CONFIG_CPU_R5000 is not set
+ # CONFIG_CPU_R5432 is not set
+-# CONFIG_CPU_R5500 is not set
+ # CONFIG_CPU_R6000 is not set
+ # CONFIG_CPU_NEVADA is not set
+ # CONFIG_CPU_R8000 is not set
+@@ -103,7 +94,6 @@
+ # CONFIG_CPU_RM7000 is not set
+ # CONFIG_CPU_RM9000 is not set
+ # CONFIG_CPU_SB1 is not set
+-# CONFIG_CPU_CAVIUM_OCTEON is not set
+ CONFIG_SYS_HAS_CPU_TX39XX=y
+ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+@@ -127,12 +117,14 @@
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_NO_HZ is not set
+ # CONFIG_HIGH_RES_TIMERS is not set
+ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+@@ -167,15 +159,6 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+@@ -188,6 +171,7 @@
+ CONFIG_SYSCTL=y
+ CONFIG_EMBEDDED=y
+ CONFIG_SYSCTL_SYSCALL=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_EXTRA_PASS is not set
+ # CONFIG_HOTPLUG is not set
+@@ -204,23 +188,26 @@
+ CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ # CONFIG_MODULES is not set
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
++# CONFIG_LSF is not set
+ #
+ # IO Schedulers
+@@ -234,7 +221,7 @@
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
+-# CONFIG_FREEZER is not set
++CONFIG_CLASSIC_RCU=y
+ #
+ # Bus options (PCI, PCMCIA, EISA, ISA, TC)
+@@ -244,15 +231,12 @@
+ CONFIG_PCI_DOMAINS=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+ CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_STUB is not set
+ CONFIG_MMU=y
+ #
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
+ CONFIG_TRAD_SIGNALS=y
+@@ -261,12 +245,15 @@
+ #
+ CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ # CONFIG_PM is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -306,7 +293,6 @@
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -316,9 +302,14 @@
+ # CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+-# CONFIG_PHONET is not set
+-# CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ #
+@@ -332,89 +323,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_AR7_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-CONFIG_MTD_PHYSMAP=y
+-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
++# CONFIG_MTD is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_CPQ_DA is not set
+@@ -427,7 +336,6 @@
+ # CONFIG_BLK_DEV_RAM is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ # CONFIG_MISC_DEVICES is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -453,6 +361,7 @@
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+@@ -474,9 +383,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -486,7 +392,6 @@
+ # CONFIG_SUNGEM is not set
+ # CONFIG_CASSINI is not set
+ # CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_SMC91X is not set
+ # CONFIG_DM9000 is not set
+ # CONFIG_NET_TULIP is not set
+ # CONFIG_HP100 is not set
+@@ -494,9 +399,6 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ CONFIG_NET_PCI=y
+ # CONFIG_PCNET32 is not set
+ # CONFIG_AMD8111_ETH is not set
+@@ -504,6 +406,7 @@
+ # CONFIG_B44 is not set
+ # CONFIG_FORCEDETH is not set
+ CONFIG_TC35815=y
++# CONFIG_EEPRO100 is not set
+ # CONFIG_E100 is not set
+ # CONFIG_FEALNX is not set
+ # CONFIG_NATSEMI is not set
+@@ -512,11 +415,9 @@
+ # CONFIG_R6040 is not set
+ # CONFIG_SIS900 is not set
+ # CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+ # CONFIG_SUNDANCE is not set
+ # CONFIG_TLAN is not set
+ # CONFIG_VIA_RHINE is not set
+-# CONFIG_ATL2 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+ # CONFIG_TR is not set
+@@ -527,10 +428,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_FDDI is not set
+ # CONFIG_PPP is not set
+@@ -543,7 +440,27 @@
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+ #
+ # Hardware I/O ports
+@@ -600,11 +517,10 @@
+ CONFIG_DEVPORT=y
+ # CONFIG_I2C is not set
+ # CONFIG_SPI is not set
+-CONFIG_ARCH_REQUIRE_GPIOLIB=y
+-CONFIG_GPIOLIB=y
++CONFIG_HAVE_GPIO_LIB=y
+ #
+-# Memory mapped GPIO expanders:
++# GPIO Support
+ #
+ #
+@@ -612,11 +528,6 @@
+ #
+ #
+-# PCI GPIO expanders:
+-#
+-# CONFIG_GPIO_BT8XX is not set
+-
+-#
+ # SPI GPIO expanders:
+ #
+ # CONFIG_W1 is not set
+@@ -631,7 +542,6 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-# CONFIG_ALIM7101_WDT is not set
+ CONFIG_TXX9_WDT=y
+ #
+@@ -639,21 +549,18 @@
+ #
+ # CONFIG_PCIPCWATCHDOG is not set
+ # CONFIG_WDTPCI is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+@@ -684,26 +591,16 @@
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
+ # CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
+ # CONFIG_USB_SUPPORT is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+-CONFIG_NEW_LEDS=y
+-CONFIG_LEDS_CLASS=y
+-
+-#
+-# LED drivers
+-#
+-CONFIG_LEDS_GPIO=y
+-
+-#
+-# LED Triggers
+-#
+-CONFIG_LEDS_TRIGGERS=y
+-# CONFIG_LEDS_TRIGGER_TIMER is not set
+-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++# CONFIG_NEW_LEDS is not set
+ # CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+ CONFIG_RTC_LIB=y
+@@ -729,34 +626,27 @@
+ # Platform RTC drivers
+ #
+ # CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1286 is not set
+ # CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+ CONFIG_RTC_DRV_DS1742=y
+ # CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+ #
+ # on-CPU RTC drivers
+ #
+-# CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+ #
+ # CONFIG_EXT2_FS is not set
+ # CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4_FS is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+ CONFIG_DNOTIFY=y
+@@ -786,17 +676,28 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ # CONFIG_TMPFS is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-# CONFIG_MISC_FILESYSTEMS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ # CONFIG_NFS_V3 is not set
+-CONFIG_ROOT_NFS=y
+ # CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+@@ -825,16 +726,7 @@
+ # CONFIG_DEBUG_FS is not set
+ # CONFIG_HEADERS_CHECK is not set
+ # CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_MEMORY_INIT is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-CONFIG_SYSCTL_SYSCALL_CHECK=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+-CONFIG_HAVE_ARCH_KGDB=y
+ CONFIG_CMDLINE=""
+ #
+@@ -842,18 +734,15 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/configs/markeins_defconfig linux-2.6.29-rc3.owrt/arch/mips/configs/markeins_defconfig
+--- linux-2.6.29.owrt/arch/mips/configs/markeins_defconfig     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/configs/markeins_defconfig 1970-01-01 01:00:00.000000000 +0100
+@@ -1,1439 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.20
+-# Tue Feb 20 21:47:29 2007
+-#
+-CONFIG_MIPS=y
+-
+-#
+-# Machine selection
+-#
+-CONFIG_ZONE_DMA=y
+-# CONFIG_MIPS_MTX1 is not set
+-# CONFIG_MIPS_BOSPORUS is not set
+-# CONFIG_MIPS_PB1000 is not set
+-# CONFIG_MIPS_PB1100 is not set
+-# CONFIG_MIPS_PB1500 is not set
+-# CONFIG_MIPS_PB1550 is not set
+-# CONFIG_MIPS_PB1200 is not set
+-# CONFIG_MIPS_DB1000 is not set
+-# CONFIG_MIPS_DB1100 is not set
+-# CONFIG_MIPS_DB1500 is not set
+-# CONFIG_MIPS_DB1550 is not set
+-# CONFIG_MIPS_DB1200 is not set
+-# CONFIG_MIPS_MIRAGE is not set
+-# CONFIG_BASLER_EXCITE is not set
+-# CONFIG_MIPS_COBALT is not set
+-# CONFIG_MACH_DECSTATION is not set
+-# CONFIG_MACH_JAZZ is not set
+-# CONFIG_MIPS_MALTA is not set
+-# CONFIG_WR_PPMC is not set
+-# CONFIG_MIPS_SIM is not set
+-# CONFIG_MOMENCO_JAGUAR_ATX is not set
+-# CONFIG_MIPS_XXS1500 is not set
+-# CONFIG_PNX8550_JBS is not set
+-# CONFIG_PNX8550_STB810 is not set
+-# CONFIG_MACH_VR41XX is not set
+-# CONFIG_PMC_YOSEMITE is not set
+-CONFIG_NEC_MARKEINS=y
+-# CONFIG_SGI_IP22 is not set
+-# CONFIG_SGI_IP27 is not set
+-# CONFIG_SGI_IP32 is not set
+-# CONFIG_SIBYTE_BIGSUR is not set
+-# CONFIG_SIBYTE_SWARM is not set
+-# CONFIG_SIBYTE_SENTOSA is not set
+-# CONFIG_SIBYTE_RHONE is not set
+-# CONFIG_SIBYTE_CARMEL is not set
+-# CONFIG_SIBYTE_LITTLESUR is not set
+-# CONFIG_SIBYTE_CRHINE is not set
+-# CONFIG_SIBYTE_CRHONE is not set
+-# CONFIG_SNI_RM is not set
+-# CONFIG_TOSHIBA_JMR3927 is not set
+-# CONFIG_TOSHIBA_RBTX4927 is not set
+-# CONFIG_TOSHIBA_RBTX4938 is not set
+-CONFIG_RWSEM_GENERIC_SPINLOCK=y
+-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+-CONFIG_DMA_NONCOHERENT=y
+-CONFIG_DMA_NEED_PCI_MAP_STATE=y
+-CONFIG_CPU_BIG_ENDIAN=y
+-# CONFIG_CPU_LITTLE_ENDIAN is not set
+-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+-CONFIG_IRQ_CPU=y
+-CONFIG_SWAP_IO_SPACE=y
+-CONFIG_SOC_EMMA2RH=y
+-CONFIG_MIPS_L1_CACHE_SHIFT=5
+-
+-#
+-# CPU selection
+-#
+-# CONFIG_CPU_MIPS32_R1 is not set
+-# CONFIG_CPU_MIPS32_R2 is not set
+-# CONFIG_CPU_MIPS64_R1 is not set
+-# CONFIG_CPU_MIPS64_R2 is not set
+-# CONFIG_CPU_R3000 is not set
+-# CONFIG_CPU_TX39XX is not set
+-# CONFIG_CPU_VR41XX is not set
+-# CONFIG_CPU_R4300 is not set
+-# CONFIG_CPU_R4X00 is not set
+-# CONFIG_CPU_TX49XX is not set
+-CONFIG_CPU_R5000=y
+-# CONFIG_CPU_R5432 is not set
+-# CONFIG_CPU_R6000 is not set
+-# CONFIG_CPU_NEVADA is not set
+-# CONFIG_CPU_R8000 is not set
+-# CONFIG_CPU_R10000 is not set
+-# CONFIG_CPU_RM7000 is not set
+-# CONFIG_CPU_RM9000 is not set
+-# CONFIG_CPU_SB1 is not set
+-CONFIG_SYS_HAS_CPU_R5000=y
+-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+-
+-#
+-# Kernel type
+-#
+-CONFIG_32BIT=y
+-# CONFIG_64BIT is not set
+-CONFIG_PAGE_SIZE_4KB=y
+-# CONFIG_PAGE_SIZE_8KB is not set
+-# CONFIG_PAGE_SIZE_16KB is not set
+-# CONFIG_PAGE_SIZE_64KB is not set
+-CONFIG_MIPS_MT_DISABLED=y
+-# CONFIG_MIPS_MT_SMP is not set
+-# CONFIG_MIPS_MT_SMTC is not set
+-# CONFIG_MIPS_VPE_LOADER is not set
+-# CONFIG_64BIT_PHYS_ADDR is not set
+-CONFIG_CPU_HAS_LLSC=y
+-CONFIG_CPU_HAS_SYNC=y
+-CONFIG_GENERIC_HARDIRQS=y
+-CONFIG_GENERIC_IRQ_PROBE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-# CONFIG_HZ_48 is not set
+-# CONFIG_HZ_100 is not set
+-# CONFIG_HZ_128 is not set
+-# CONFIG_HZ_250 is not set
+-# CONFIG_HZ_256 is not set
+-CONFIG_HZ_1000=y
+-# CONFIG_HZ_1024 is not set
+-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+-CONFIG_HZ=1000
+-# CONFIG_PREEMPT_NONE is not set
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-CONFIG_PREEMPT=y
+-CONFIG_PREEMPT_BKL=y
+-# CONFIG_KEXEC is not set
+-CONFIG_LOCKDEP_SUPPORT=y
+-CONFIG_STACKTRACE_SUPPORT=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# Code maturity level options
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_LOCK_KERNEL=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
+-# CONFIG_AUDIT is not set
+-CONFIG_IKCONFIG=y
+-CONFIG_IKCONFIG_PROC=y
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_EPOLL=y
+-CONFIG_SHMEM=y
+-CONFIG_SLAB=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_SLOB is not set
+-
+-#
+-# Loadable module support
+-#
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-CONFIG_MODULE_FORCE_UNLOAD=y
+-CONFIG_MODVERSIONS=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-
+-#
+-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+-#
+-CONFIG_HW_HAS_PCI=y
+-CONFIG_PCI=y
+-CONFIG_MMU=y
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
+-# CONFIG_PCCARD is not set
+-
+-#
+-# PCI Hotplug Support
+-#
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Executable file formats
+-#
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_TRAD_SIGNALS=y
+-
+-#
+-# Power management options
+-#
+-CONFIG_PM=y
+-# CONFIG_PM_LEGACY is not set
+-# CONFIG_PM_DEBUG is not set
+-# CONFIG_PM_SYSFS_DEPRECATED is not set
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-# CONFIG_NETDEBUG is not set
+-CONFIG_PACKET=y
+-CONFIG_PACKET_MMAP=y
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-CONFIG_XFRM_MIGRATE=y
+-CONFIG_NET_KEY=y
+-CONFIG_NET_KEY_MIGRATE=y
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_MULTIPLE_TABLES=y
+-CONFIG_IP_ROUTE_MULTIPATH=y
+-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+-CONFIG_IP_ROUTE_VERBOSE=y
+-CONFIG_IP_PNP=y
+-# CONFIG_IP_PNP_DHCP is not set
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-CONFIG_INET_TUNNEL=m
+-CONFIG_INET_XFRM_MODE_TRANSPORT=m
+-CONFIG_INET_XFRM_MODE_TUNNEL=m
+-CONFIG_INET_XFRM_MODE_BEET=m
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-CONFIG_TCP_MD5SIG=y
+-
+-#
+-# IP: Virtual Server Configuration
+-#
+-# CONFIG_IP_VS is not set
+-CONFIG_IPV6=m
+-# CONFIG_IPV6_PRIVACY is not set
+-# CONFIG_IPV6_ROUTER_PREF is not set
+-# CONFIG_INET6_AH is not set
+-# CONFIG_INET6_ESP is not set
+-# CONFIG_INET6_IPCOMP is not set
+-CONFIG_IPV6_MIP6=y
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+-CONFIG_INET6_XFRM_MODE_TUNNEL=m
+-CONFIG_INET6_XFRM_MODE_BEET=m
+-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+-CONFIG_IPV6_SIT=m
+-# CONFIG_IPV6_TUNNEL is not set
+-CONFIG_IPV6_MULTIPLE_TABLES=y
+-CONFIG_IPV6_SUBTREES=y
+-CONFIG_NETWORK_SECMARK=y
+-CONFIG_NETFILTER=y
+-# CONFIG_NETFILTER_DEBUG is not set
+-
+-#
+-# Core Netfilter Configuration
+-#
+-# CONFIG_NETFILTER_NETLINK is not set
+-CONFIG_NF_CONNTRACK_ENABLED=m
+-CONFIG_NF_CONNTRACK_SUPPORT=y
+-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+-CONFIG_NF_CONNTRACK=m
+-CONFIG_NF_CT_ACCT=y
+-CONFIG_NF_CONNTRACK_MARK=y
+-CONFIG_NF_CONNTRACK_SECMARK=y
+-CONFIG_NF_CONNTRACK_EVENTS=y
+-CONFIG_NF_CT_PROTO_GRE=m
+-CONFIG_NF_CT_PROTO_SCTP=m
+-CONFIG_NF_CONNTRACK_AMANDA=m
+-CONFIG_NF_CONNTRACK_FTP=m
+-CONFIG_NF_CONNTRACK_H323=m
+-CONFIG_NF_CONNTRACK_IRC=m
+-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+-CONFIG_NF_CONNTRACK_PPTP=m
+-CONFIG_NF_CONNTRACK_SANE=m
+-CONFIG_NF_CONNTRACK_SIP=m
+-CONFIG_NF_CONNTRACK_TFTP=m
+-CONFIG_NETFILTER_XTABLES=m
+-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+-CONFIG_NETFILTER_XT_TARGET_DSCP=m
+-CONFIG_NETFILTER_XT_TARGET_MARK=m
+-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+-CONFIG_NETFILTER_XT_MATCH_DCCP=m
+-CONFIG_NETFILTER_XT_MATCH_DSCP=m
+-CONFIG_NETFILTER_XT_MATCH_ESP=m
+-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+-CONFIG_NETFILTER_XT_MATCH_MAC=m
+-CONFIG_NETFILTER_XT_MATCH_MARK=m
+-CONFIG_NETFILTER_XT_MATCH_POLICY=m
+-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+-CONFIG_NETFILTER_XT_MATCH_REALM=m
+-CONFIG_NETFILTER_XT_MATCH_SCTP=m
+-CONFIG_NETFILTER_XT_MATCH_STATE=m
+-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+-CONFIG_NETFILTER_XT_MATCH_STRING=m
+-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+-
+-#
+-# IP: Netfilter Configuration
+-#
+-CONFIG_NF_CONNTRACK_IPV4=m
+-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+-# CONFIG_IP_NF_QUEUE is not set
+-CONFIG_IP_NF_IPTABLES=m
+-CONFIG_IP_NF_MATCH_IPRANGE=m
+-CONFIG_IP_NF_MATCH_TOS=m
+-CONFIG_IP_NF_MATCH_RECENT=m
+-CONFIG_IP_NF_MATCH_ECN=m
+-CONFIG_IP_NF_MATCH_AH=m
+-CONFIG_IP_NF_MATCH_TTL=m
+-CONFIG_IP_NF_MATCH_OWNER=m
+-CONFIG_IP_NF_MATCH_ADDRTYPE=m
+-CONFIG_IP_NF_FILTER=m
+-CONFIG_IP_NF_TARGET_REJECT=m
+-CONFIG_IP_NF_TARGET_LOG=m
+-CONFIG_IP_NF_TARGET_ULOG=m
+-CONFIG_NF_NAT=m
+-CONFIG_NF_NAT_NEEDED=y
+-CONFIG_IP_NF_TARGET_MASQUERADE=m
+-CONFIG_IP_NF_TARGET_REDIRECT=m
+-CONFIG_IP_NF_TARGET_NETMAP=m
+-CONFIG_IP_NF_TARGET_SAME=m
+-CONFIG_NF_NAT_SNMP_BASIC=m
+-CONFIG_NF_NAT_PROTO_GRE=m
+-CONFIG_NF_NAT_FTP=m
+-CONFIG_NF_NAT_IRC=m
+-CONFIG_NF_NAT_TFTP=m
+-CONFIG_NF_NAT_AMANDA=m
+-CONFIG_NF_NAT_PPTP=m
+-CONFIG_NF_NAT_H323=m
+-CONFIG_NF_NAT_SIP=m
+-CONFIG_IP_NF_MANGLE=m
+-CONFIG_IP_NF_TARGET_TOS=m
+-CONFIG_IP_NF_TARGET_ECN=m
+-CONFIG_IP_NF_TARGET_TTL=m
+-CONFIG_IP_NF_TARGET_CLUSTERIP=m
+-CONFIG_IP_NF_RAW=m
+-CONFIG_IP_NF_ARPTABLES=m
+-CONFIG_IP_NF_ARPFILTER=m
+-CONFIG_IP_NF_ARP_MANGLE=m
+-
+-#
+-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+-#
+-CONFIG_NF_CONNTRACK_IPV6=m
+-# CONFIG_IP6_NF_QUEUE is not set
+-CONFIG_IP6_NF_IPTABLES=m
+-CONFIG_IP6_NF_MATCH_RT=m
+-CONFIG_IP6_NF_MATCH_OPTS=m
+-CONFIG_IP6_NF_MATCH_FRAG=m
+-CONFIG_IP6_NF_MATCH_HL=m
+-CONFIG_IP6_NF_MATCH_OWNER=m
+-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+-CONFIG_IP6_NF_MATCH_AH=m
+-CONFIG_IP6_NF_MATCH_MH=m
+-CONFIG_IP6_NF_MATCH_EUI64=m
+-CONFIG_IP6_NF_FILTER=m
+-CONFIG_IP6_NF_TARGET_LOG=m
+-CONFIG_IP6_NF_TARGET_REJECT=m
+-CONFIG_IP6_NF_MANGLE=m
+-CONFIG_IP6_NF_TARGET_HL=m
+-CONFIG_IP6_NF_RAW=m
+-
+-#
+-# DCCP Configuration (EXPERIMENTAL)
+-#
+-# CONFIG_IP_DCCP is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+-CONFIG_IP_SCTP=m
+-# CONFIG_SCTP_DBG_MSG is not set
+-# CONFIG_SCTP_DBG_OBJCNT is not set
+-# CONFIG_SCTP_HMAC_NONE is not set
+-# CONFIG_SCTP_HMAC_SHA1 is not set
+-CONFIG_SCTP_HMAC_MD5=y
+-
+-#
+-# TIPC Configuration (EXPERIMENTAL)
+-#
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+-# CONFIG_NET_SCHED is not set
+-CONFIG_NET_CLS_ROUTE=y
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_IEEE80211 is not set
+-CONFIG_FIB_RULES=y
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=m
+-# CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+-# CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-# CONFIG_MTD_OBSOLETE_CHIPS is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0x0
+-CONFIG_MTD_PHYSMAP_LEN=0x0
+-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-
+-#
+-# NAND Flash Device Drivers
+-#
+-# CONFIG_MTD_NAND is not set
+-
+-#
+-# OneNAND Flash Device Drivers
+-#
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# Parallel port support
+-#
+-# CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=m
+-CONFIG_BLK_DEV_CRYPTOLOOP=m
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_RAM is not set
+-# CONFIG_BLK_DEV_INITRD is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-CONFIG_SGI_IOC4=m
+-# CONFIG_TIFM_CORE is not set
+-
+-#
+-# ATA/ATAPI/MFM/RLL support
+-#
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=m
+-CONFIG_SCSI_TGT=m
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_SCSI_PROC_FS is not set
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=m
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=m
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-CONFIG_SCSI_SCAN_ASYNC=y
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-CONFIG_SCSI_SAS_ATTRS=m
+-CONFIG_SCSI_SAS_LIBSAS=m
+-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+-
+-#
+-# SCSI low-level drivers
+-#
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-CONFIG_SCSI_AIC94XX=m
+-# CONFIG_AIC94XX_DEBUG is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-
+-#
+-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+-#
+-# CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+-# CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-# CONFIG_FUSION_SPI is not set
+-# CONFIG_FUSION_FC is not set
+-# CONFIG_FUSION_SAS is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_IEEE1394 is not set
+-
+-#
+-# I2O device support
+-#
+-# CONFIG_I2O is not set
+-
+-#
+-# Network device support
+-#
+-CONFIG_NETDEVICES=y
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_EQUALIZER is not set
+-CONFIG_TUN=m
+-
+-#
+-# ARCnet devices
+-#
+-# CONFIG_ARCNET is not set
+-
+-#
+-# PHY device support
+-#
+-# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_DM9000 is not set
+-
+-#
+-# Tulip family network device support
+-#
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_DGRS is not set
+-# CONFIG_EEPRO100 is not set
+-# CONFIG_E100 is not set
+-# CONFIG_FEALNX is not set
+-CONFIG_NATSEMI=y
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-
+-#
+-# Ethernet (1000 Mbit)
+-#
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_QLA3XXX=m
+-# CONFIG_ATL1 is not set
+-
+-#
+-# Ethernet (10000 Mbit)
+-#
+-# CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3=m
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-CONFIG_NETXEN_NIC=m
+-
+-#
+-# Token Ring devices
+-#
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN (non-hamradio)
+-#
+-# CONFIG_NET_RADIO is not set
+-
+-#
+-# Wan interfaces
+-#
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-CONFIG_PPP=m
+-# CONFIG_PPP_MULTILINK is not set
+-# CONFIG_PPP_FILTER is not set
+-CONFIG_PPP_ASYNC=m
+-CONFIG_PPP_SYNC_TTY=m
+-CONFIG_PPP_DEFLATE=m
+-# CONFIG_PPP_BSDCOMP is not set
+-# CONFIG_PPP_MPPE is not set
+-# CONFIG_PPPOE is not set
+-# CONFIG_SLIP is not set
+-CONFIG_SLHC=m
+-# CONFIG_NET_FC is not set
+-# CONFIG_SHAPER is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+-# CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_TSDEV is not set
+-CONFIG_INPUT_EVDEV=m
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+-# CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-# CONFIG_WATCHDOG is not set
+-# CONFIG_HW_RANDOM is not set
+-CONFIG_RTC=m
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_DTLK is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_DRM is not set
+-# CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+-# CONFIG_TCG_TPM is not set
+-
+-#
+-# I2C support
+-#
+-CONFIG_I2C=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PASEMI is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-# CONFIG_I2C_PCA_ISA is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_SENSORS_DS1337 is not set
+-# CONFIG_SENSORS_DS1374 is not set
+-# CONFIG_EEPROM_LEGACY is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-CONFIG_I2C_DEBUG_CORE=y
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-CONFIG_I2C_DEBUG_BUS=y
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-
+-#
+-# Dallas's 1-wire bus
+-#
+-# CONFIG_W1 is not set
+-
+-#
+-# Hardware Monitoring support
+-#
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_ABITUGURU is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ASB100 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_FSCHER is not set
+-# CONFIG_SENSORS_FSCPOS is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-
+-#
+-# Digital Video Broadcasting Devices
+-#
+-# CONFIG_DVB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_FIRMWARE_EDID is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-
+-#
+-# HID Devices
+-#
+-# CONFIG_HID is not set
+-
+-#
+-# USB support
+-#
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# USB Gadget Support
+-#
+-# CONFIG_USB_GADGET is not set
+-
+-#
+-# MMC/SD Card support
+-#
+-# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
+-
+-#
+-# LED drivers
+-#
+-
+-#
+-# LED Triggers
+-#
+-
+-#
+-# InfiniBand support
+-#
+-# CONFIG_INFINIBAND is not set
+-
+-#
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+-#
+-
+-#
+-# Real Time Clock
+-#
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# DMA Engine support
+-#
+-# CONFIG_DMA_ENGINE is not set
+-
+-#
+-# DMA Clients
+-#
+-
+-#
+-# DMA Devices
+-#
+-
+-#
+-# Auxiliary Display support
+-#
+-
+-#
+-# Virtualization
+-#
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-CONFIG_EXT2_FS_XATTR=y
+-CONFIG_EXT2_FS_POSIX_ACL=y
+-CONFIG_EXT2_FS_SECURITY=y
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
+-# CONFIG_JBD_DEBUG is not set
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-CONFIG_FS_POSIX_ACL=y
+-CONFIG_XFS_FS=m
+-# CONFIG_XFS_QUOTA is not set
+-# CONFIG_XFS_SECURITY is not set
+-# CONFIG_XFS_POSIX_ACL is not set
+-# CONFIG_XFS_RT is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_DNOTIFY is not set
+-# CONFIG_AUTOFS_FS is not set
+-CONFIG_AUTOFS4_FS=m
+-# CONFIG_FUSE_FS is not set
+-CONFIG_GENERIC_ACL=y
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=y
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-CONFIG_NTFS_FS=m
+-# CONFIG_NTFS_DEBUG is not set
+-# CONFIG_NTFS_RW is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-CONFIG_TMPFS_POSIX_ACL=y
+-# CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+-CONFIG_JFFS2_ZLIB=y
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-# CONFIG_JFFS2_CMODE_NONE is not set
+-CONFIG_JFFS2_CMODE_PRIORITY=y
+-# CONFIG_JFFS2_CMODE_SIZE is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-CONFIG_NFS_DIRECTIO=y
+-CONFIG_NFSD=m
+-CONFIG_NFSD_V3=y
+-# CONFIG_NFSD_V3_ACL is not set
+-# CONFIG_NFSD_V4 is not set
+-CONFIG_NFSD_TCP=y
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_EXPORTFS=m
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-CONFIG_SMB_FS=m
+-# CONFIG_SMB_NLS_DEFAULT is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT=""
+-CONFIG_NLS_CODEPAGE_437=m
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-CONFIG_NLS_ASCII=m
+-CONFIG_NLS_ISO8859_1=m
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=m
+-
+-#
+-# Distributed Lock Manager
+-#
+-CONFIG_DLM=m
+-CONFIG_DLM_TCP=y
+-# CONFIG_DLM_SCTP is not set
+-# CONFIG_DLM_DEBUG is not set
+-
+-#
+-# Profiling support
+-#
+-# CONFIG_PROFILING is not set
+-
+-#
+-# Kernel hacking
+-#
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-CONFIG_CROSSCOMPILE=y
+-CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_HMAC=y
+-CONFIG_CRYPTO_XCBC=m
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-CONFIG_CRYPTO_GF128MUL=m
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-CONFIG_CRYPTO_LRW=m
+-CONFIG_CRYPTO_DES=y
+-CONFIG_CRYPTO_FCRYPT=m
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-CONFIG_CRYPTO_CAMELLIA=m
+-# CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-CONFIG_CRC_CCITT=m
+-# CONFIG_CRC16 is not set
+-CONFIG_CRC32=y
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_TEXTSEARCH=y
+-CONFIG_TEXTSEARCH_KMP=m
+-CONFIG_TEXTSEARCH_BM=m
+-CONFIG_TEXTSEARCH_FSM=m
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/configs/rbtx49xx_defconfig linux-2.6.29-rc3.owrt/arch/mips/configs/rbtx49xx_defconfig
+--- linux-2.6.29.owrt/arch/mips/configs/rbtx49xx_defconfig     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/configs/rbtx49xx_defconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc7
+-# Wed Mar  4 23:08:06 2009
++# Linux kernel version: 2.6.26-rc9
++# Fri Jul 11 23:03:21 2008
+ #
+ CONFIG_MIPS=y
+@@ -18,10 +18,8 @@
+ # CONFIG_LEMOTE_FULONG is not set
+ # CONFIG_MIPS_MALTA is not set
+ # CONFIG_MIPS_SIM is not set
+-# CONFIG_MACH_EMMA is not set
++# CONFIG_MARKEINS is not set
+ # CONFIG_MACH_VR41XX is not set
+-# CONFIG_NXP_STB220 is not set
+-# CONFIG_NXP_STB225 is not set
+ # CONFIG_PNX8550_JBS is not set
+ # CONFIG_PNX8550_STB810 is not set
+ # CONFIG_PMC_MSP is not set
+@@ -41,28 +39,20 @@
+ # CONFIG_SNI_RM is not set
+ # CONFIG_MACH_TX39XX is not set
+ CONFIG_MACH_TX49XX=y
+-# CONFIG_MIKROTIK_RB532 is not set
+ # CONFIG_WR_PPMC is not set
+-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+-CONFIG_MACH_TXX9=y
+ CONFIG_TOSHIBA_RBTX4927=y
+ CONFIG_TOSHIBA_RBTX4938=y
+-CONFIG_TOSHIBA_RBTX4939=y
+ CONFIG_SOC_TX4927=y
+ CONFIG_SOC_TX4938=y
+-CONFIG_SOC_TX4939=y
+-CONFIG_TXX9_7SEGLED=y
+ # CONFIG_TOSHIBA_FPCIB0 is not set
+ CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
+ #
+ # Multiplex Pin Select
+ #
+-# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
++CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+ # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+ # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+-CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
+ CONFIG_PCI_TX4927=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+@@ -74,18 +64,14 @@
+ CONFIG_GENERIC_CLOCKEVENTS=y
+ CONFIG_GENERIC_TIME=y
+ CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+-CONFIG_CEVT_R4K_LIB=y
+ CONFIG_CEVT_R4K=y
+ CONFIG_CEVT_TXX9=y
+-CONFIG_CSRC_R4K_LIB=y
+ CONFIG_CSRC_R4K=y
+ CONFIG_GPIO_TXX9=y
+ CONFIG_DMA_NONCOHERENT=y
+ CONFIG_DMA_NEED_PCI_MAP_STATE=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_SYS_HAS_EARLY_PRINTK=y
+ # CONFIG_HOTPLUG_CPU is not set
+ # CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_GPIO=y
+@@ -114,7 +100,6 @@
+ CONFIG_CPU_TX49XX=y
+ # CONFIG_CPU_R5000 is not set
+ # CONFIG_CPU_R5432 is not set
+-# CONFIG_CPU_R5500 is not set
+ # CONFIG_CPU_R6000 is not set
+ # CONFIG_CPU_NEVADA is not set
+ # CONFIG_CPU_R8000 is not set
+@@ -122,7 +107,6 @@
+ # CONFIG_CPU_RM7000 is not set
+ # CONFIG_CPU_RM9000 is not set
+ # CONFIG_CPU_SB1 is not set
+-# CONFIG_CPU_CAVIUM_OCTEON is not set
+ CONFIG_SYS_HAS_CPU_TX49XX=y
+ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+ CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+@@ -150,12 +134,13 @@
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ CONFIG_TICK_ONESHOT=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+@@ -191,15 +176,6 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+@@ -214,6 +190,7 @@
+ CONFIG_SYSCTL=y
+ CONFIG_EMBEDDED=y
+ CONFIG_SYSCTL_SYSCALL=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_EXTRA_PASS is not set
+ # CONFIG_HOTPLUG is not set
+@@ -230,26 +207,30 @@
+ CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+-CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
++# CONFIG_LSF is not set
+ #
+ # IO Schedulers
+@@ -263,8 +244,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+-# CONFIG_PROBE_INITRD_HEADER is not set
+-# CONFIG_FREEZER is not set
++CONFIG_CLASSIC_RCU=y
+ #
+ # Bus options (PCI, PCMCIA, EISA, ISA, TC)
+@@ -274,15 +254,12 @@
+ CONFIG_PCI_DOMAINS=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCI_LEGACY is not set
+-# CONFIG_PCI_STUB is not set
+ CONFIG_MMU=y
+ #
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
+ CONFIG_TRAD_SIGNALS=y
+@@ -291,12 +268,15 @@
+ #
+ CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ # CONFIG_PM is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -338,7 +318,6 @@
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -348,9 +327,14 @@
+ # CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+-# CONFIG_PHONET is not set
+-# CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ #
+@@ -364,90 +348,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_AR7_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-CONFIG_MTD_PHYSMAP=y
+-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
++# CONFIG_MTD is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_CPQ_DA is not set
+@@ -464,60 +365,9 @@
+ # CONFIG_BLK_DEV_XIP is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ # CONFIG_MISC_DEVICES is not set
+ CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-CONFIG_IDE_TIMINGS=y
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_IDE_GD=y
+-CONFIG_IDE_GD_ATA=y
+-# CONFIG_IDE_GD_ATAPI is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-# CONFIG_IDE_GENERIC is not set
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-# CONFIG_BLK_DEV_GENERIC is not set
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8172 is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-# CONFIG_BLK_DEV_VIA82CXXX is not set
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDE_TX4938=y
+-CONFIG_BLK_DEV_IDE_TX4939=y
+-CONFIG_BLK_DEV_IDEDMA=y
++# CONFIG_IDE is not set
+ #
+ # SCSI device support
+@@ -540,6 +390,7 @@
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+@@ -561,19 +412,15 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ # CONFIG_AX88796 is not set
+ # CONFIG_HAPPYMEAL is not set
+ # CONFIG_SUNGEM is not set
+ # CONFIG_CASSINI is not set
+ # CONFIG_NET_VENDOR_3COM is not set
+-CONFIG_SMC91X=y
+ # CONFIG_DM9000 is not set
+ # CONFIG_NET_TULIP is not set
+ # CONFIG_HP100 is not set
+@@ -582,9 +429,6 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ CONFIG_NET_PCI=y
+ # CONFIG_PCNET32 is not set
+ # CONFIG_AMD8111_ETH is not set
+@@ -592,6 +436,7 @@
+ # CONFIG_B44 is not set
+ # CONFIG_FORCEDETH is not set
+ CONFIG_TC35815=y
++# CONFIG_EEPRO100 is not set
+ # CONFIG_E100 is not set
+ # CONFIG_FEALNX is not set
+ # CONFIG_NATSEMI is not set
+@@ -600,11 +445,9 @@
+ # CONFIG_R6040 is not set
+ # CONFIG_SIS900 is not set
+ # CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+ # CONFIG_SUNDANCE is not set
+ # CONFIG_TLAN is not set
+ # CONFIG_VIA_RHINE is not set
+-# CONFIG_ATL2 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+ # CONFIG_TR is not set
+@@ -615,10 +458,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_FDDI is not set
+ # CONFIG_PPP is not set
+@@ -663,7 +502,6 @@
+ CONFIG_SERIAL_TXX9_STDSERIAL=y
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+ # CONFIG_IPMI_HANDLER is not set
+@@ -679,19 +517,17 @@
+ #
+ # SPI Master Controller Drivers
+ #
+-# CONFIG_SPI_BITBANG is not set
+-# CONFIG_SPI_GPIO is not set
+ CONFIG_SPI_TXX9=y
+ #
+ # SPI Protocol Masters
+ #
++CONFIG_EEPROM_AT25=y
+ # CONFIG_SPI_TLE62X0 is not set
+-CONFIG_ARCH_REQUIRE_GPIOLIB=y
+-CONFIG_GPIOLIB=y
++CONFIG_HAVE_GPIO_LIB=y
+ #
+-# Memory mapped GPIO expanders:
++# GPIO Support
+ #
+ #
+@@ -699,14 +535,8 @@
+ #
+ #
+-# PCI GPIO expanders:
+-#
+-# CONFIG_GPIO_BT8XX is not set
+-
+-#
+ # SPI GPIO expanders:
+ #
+-# CONFIG_GPIO_MAX7301 is not set
+ # CONFIG_GPIO_MCP23S08 is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+@@ -720,7 +550,6 @@
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-# CONFIG_ALIM7101_WDT is not set
+ CONFIG_TXX9_WDT=m
+ #
+@@ -728,21 +557,18 @@
+ #
+ # CONFIG_PCIPCWATCHDOG is not set
+ # CONFIG_WDTPCI is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+@@ -773,27 +599,15 @@
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
+ # CONFIG_SOUND is not set
+ # CONFIG_USB_SUPPORT is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+-CONFIG_NEW_LEDS=y
+-CONFIG_LEDS_CLASS=y
+-
+-#
+-# LED drivers
+-#
+-CONFIG_LEDS_GPIO=y
+-
+-#
+-# LED Triggers
+-#
+-CONFIG_LEDS_TRIGGERS=y
+-# CONFIG_LEDS_TRIGGER_TIMER is not set
+-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++# CONFIG_NEW_LEDS is not set
+ # CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+ CONFIG_RTC_LIB=y
+@@ -814,47 +628,35 @@
+ #
+ # SPI RTC drivers
+ #
+-# CONFIG_RTC_DRV_M41T94 is not set
+-# CONFIG_RTC_DRV_DS1305 is not set
+-# CONFIG_RTC_DRV_DS1390 is not set
+ # CONFIG_RTC_DRV_MAX6902 is not set
+ # CONFIG_RTC_DRV_R9701 is not set
+ CONFIG_RTC_DRV_RS5C348=y
+-# CONFIG_RTC_DRV_DS3234 is not set
+ #
+ # Platform RTC drivers
+ #
+ # CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1286 is not set
+ # CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+ CONFIG_RTC_DRV_DS1742=y
+ # CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+ #
+ # on-CPU RTC drivers
+ #
+-CONFIG_RTC_DRV_TX4939=y
+-# CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+ #
+ # CONFIG_EXT2_FS is not set
+ # CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4_FS is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ CONFIG_FS_POSIX_ACL=y
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_DNOTIFY is not set
+@@ -885,19 +687,30 @@
+ CONFIG_PROC_FS=y
+ # CONFIG_PROC_KCORE is not set
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ CONFIG_TMPFS_POSIX_ACL=y
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-# CONFIG_MISC_FILESYSTEMS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+-CONFIG_ROOT_NFS=y
+ # CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_NFS_COMMON=y
+@@ -927,16 +740,7 @@
+ CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ # CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_MEMORY_INIT is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-CONFIG_SYSCTL_SYSCALL_CHECK=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+-CONFIG_HAVE_ARCH_KGDB=y
+ CONFIG_CMDLINE=""
+ #
+@@ -944,18 +748,15 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/emma/Kconfig linux-2.6.29-rc3.owrt/arch/mips/emma/Kconfig
+--- linux-2.6.29.owrt/arch/mips/emma/Kconfig   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/arch/mips/emma/Kconfig       2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,29 @@
++choice
++      prompt "Machine type"
++      depends on MACH_EMMA
++      default NEC_MARKEINS
++
++config NEC_MARKEINS
++      bool "NEC EMMA2RH Mark-eins board"
++      select SOC_EMMA2RH
++      select HW_HAS_PCI
++      help
++        This enables support for the NEC Electronics Mark-eins boards.
++
++endchoice
++
++config SOC_EMMA2RH
++      bool
++      select SOC_EMMA
++      select SYS_HAS_CPU_R5500
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select SYS_SUPPORTS_64BIT_KERNEL
++
++config SOC_EMMA
++      bool
++      select CEVT_R4K
++      select CSRC_R4K
++      select DMA_NONCOHERENT
++      select IRQ_CPU
++      select SWAP_IO_SPACE
++      select SYS_SUPPORTS_BIG_ENDIAN
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/emma/markeins/platform.c linux-2.6.29-rc3.owrt/arch/mips/emma/markeins/platform.c
+--- linux-2.6.29.owrt/arch/mips/emma/markeins/platform.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/emma/markeins/platform.c   2009-05-10 23:48:28.000000000 +0200
+@@ -141,6 +141,13 @@
+       },
+ };
++static struct platform_device *devices[] = {
++      &i2c_emma_devices[0],
++      &i2c_emma_devices[1],
++      &i2c_emma_devices[2],
++      &serial_emma,
++};
++
+ static struct mtd_partition markeins_parts[] = {
+       [0] = {
+               .name = "RootFS",
+@@ -174,39 +181,11 @@
+       },
+ };
+-static struct physmap_flash_data markeins_flash_data = {
+-      .width          = 2,
+-      .nr_parts       = ARRAY_SIZE(markeins_parts),
+-      .parts          = markeins_parts
+-};
+-
+-static struct resource markeins_flash_resource = {
+-      .start          = 0x1e000000,
+-      .end            = 0x02000000,
+-      .flags          = IORESOURCE_MEM
+-};
+-
+-static struct platform_device markeins_flash_device = {
+-      .name           = "physmap-flash",
+-      .id             = 0,
+-      .dev            = {
+-              .platform_data  = &markeins_flash_data,
+-      },
+-      .num_resources  = 1,
+-      .resource       = &markeins_flash_resource,
+-};
+-
+-static struct platform_device *devices[] = {
+-      i2c_emma_devices,
+-      i2c_emma_devices + 1,
+-      i2c_emma_devices + 2,
+-      &serial_emma,
+-      &markeins_flash_device,
+-};
+-
+ static int __init platform_devices_setup(void)
+ {
++      physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
+       return platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+ arch_initcall(platform_devices_setup);
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/atomic.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/atomic.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/atomic.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/atomic.h       2009-05-10 23:48:28.000000000 +0200
+@@ -50,7 +50,7 @@
+ static __inline__ void atomic_add(int i, atomic_t * v)
+ {
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -62,7 +62,7 @@
+               : "=&r" (temp), "=m" (v->counter)
+               : "Ir" (i), "m" (v->counter));
+       } else if (cpu_has_llsc) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -95,7 +95,7 @@
+ static __inline__ void atomic_sub(int i, atomic_t * v)
+ {
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -107,7 +107,7 @@
+               : "=&r" (temp), "=m" (v->counter)
+               : "Ir" (i), "m" (v->counter));
+       } else if (cpu_has_llsc) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -135,12 +135,12 @@
+  */
+ static __inline__ int atomic_add_return(int i, atomic_t * v)
+ {
+-      int result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -154,7 +154,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -187,12 +187,12 @@
+ static __inline__ int atomic_sub_return(int i, atomic_t * v)
+ {
+-      int result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -206,7 +206,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -247,12 +247,12 @@
+  */
+ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
+ {
+-      int result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -270,7 +270,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              int temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -429,7 +429,7 @@
+ static __inline__ void atomic64_add(long i, atomic64_t * v)
+ {
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -441,7 +441,7 @@
+               : "=&r" (temp), "=m" (v->counter)
+               : "Ir" (i), "m" (v->counter));
+       } else if (cpu_has_llsc) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -474,7 +474,7 @@
+ static __inline__ void atomic64_sub(long i, atomic64_t * v)
+ {
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -486,7 +486,7 @@
+               : "=&r" (temp), "=m" (v->counter)
+               : "Ir" (i), "m" (v->counter));
+       } else if (cpu_has_llsc) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -514,12 +514,12 @@
+  */
+ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+ {
+-      long result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -533,7 +533,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -566,12 +566,12 @@
+ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+ {
+-      long result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -585,7 +585,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -626,12 +626,12 @@
+  */
+ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
+ {
+-      long result;
++      unsigned long result;
+       smp_llsc_mb();
+       if (cpu_has_llsc && R10000_LLSC_WAR) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+@@ -649,7 +649,7 @@
+               : "Ir" (i), "m" (v->counter)
+               : "memory");
+       } else if (cpu_has_llsc) {
+-              long temp;
++              unsigned long temp;
+               __asm__ __volatile__(
+               "       .set    mips3                                   \n"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/compat.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/compat.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/compat.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/compat.h       2009-05-10 23:48:28.000000000 +0200
+@@ -3,8 +3,6 @@
+ /*
+  * Architecture specific compatibility types
+  */
+-#include <linux/seccomp.h>
+-#include <linux/thread_info.h>
+ #include <linux/types.h>
+ #include <asm/page.h>
+ #include <asm/ptrace.h>
+@@ -220,9 +218,4 @@
+       compat_ulong_t  __unused2;
+ };
+-static inline int is_compat_task(void)
+-{
+-      return test_thread_flag(TIF_32BIT);
+-}
+-
+ #endif /* _ASM_COMPAT_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/hazards.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/hazards.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/hazards.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/hazards.h      2009-05-10 23:48:28.000000000 +0200
+@@ -138,8 +138,7 @@
+               __instruction_hazard();                                 \
+ } while (0)
+-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+-      defined(CONFIG_CPU_R5500)
++#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+ /*
+  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/gpio.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/gpio.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/gpio.h        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/gpio.h    2009-05-10 23:48:28.000000000 +0200
+@@ -80,8 +80,11 @@
+ /* Compact Flash GPIO pin */
+ #define CF_GPIO_NUM           13
++extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
++extern unsigned get_434_reg(unsigned reg_offs);
++extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
++extern unsigned char get_latch_u5(void);
+ extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
+ extern void rb532_gpio_set_istat(int bit, unsigned gpio);
+-extern void rb532_gpio_set_func(unsigned gpio);
+ #endif /* _RC32434_GPIO_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/irq.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/irq.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/irq.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/irq.h     2009-05-10 23:48:28.000000000 +0200
+@@ -30,7 +30,4 @@
+ #define ETH0_RX_OVR_IRQ       (GROUP3_IRQ_BASE + 9)
+ #define ETH0_TX_UND_IRQ       (GROUP3_IRQ_BASE + 10)
+-#define GPIO_MAPPED_IRQ_BASE  GROUP4_IRQ_BASE
+-#define GPIO_MAPPED_IRQ_GROUP 4
+-
+ #endif  /* __ASM_RC32434_IRQ_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/rb.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/rb.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/mach-rc32434/rb.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/mach-rc32434/rb.h      2009-05-10 23:48:28.000000000 +0200
+@@ -83,7 +83,4 @@
+       void __iomem    *base;
+ };
+-extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+-extern unsigned char get_latch_u5(void);
+-
+ #endif  /* __ASM_RC32434_RB_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/prefetch.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/prefetch.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/prefetch.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/prefetch.h     2009-05-10 23:48:28.000000000 +0200
+@@ -26,7 +26,7 @@
+  * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
+  * current versions due to erratum G105.
+  *
+- * VR5500 (including VR5701 and VR7701) only implement load prefetch.
++ * VR7701 only implements the Load prefetch.
+  *
+  * Finally MIPS32 and MIPS64 implement all of the following hints.
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/ptrace.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/ptrace.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/ptrace.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/ptrace.h       2009-05-10 23:48:28.000000000 +0200
+@@ -105,7 +105,7 @@
+       enum pt_watch_style style;
+       union {
+               struct mips32_watch_regs mips32;
+-              struct mips64_watch_regs mips64;
++              struct mips32_watch_regs mips64;
+       };
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/seccomp.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/seccomp.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/seccomp.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/seccomp.h      2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,6 @@
+ #ifndef __ASM_SECCOMP_H
++#include <linux/thread_info.h>
+ #include <linux/unistd.h>
+ #define __NR_seccomp_read __NR_read
+@@ -15,6 +16,8 @@
+  */
+ #ifdef CONFIG_MIPS32_O32
++#define TIF_32BIT TIF_32BIT_REGS
++
+ #define __NR_seccomp_read_32          4003
+ #define __NR_seccomp_write_32         4004
+ #define __NR_seccomp_exit_32          4001
+@@ -22,6 +25,8 @@
+ #elif defined(CONFIG_MIPS32_N32)
++#define TIF_32BIT _TIF_32BIT_ADDR
++
+ #define __NR_seccomp_read_32          6000
+ #define __NR_seccomp_write_32         6001
+ #define __NR_seccomp_exit_32          6058
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/spinlock.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/spinlock.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/spinlock.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/spinlock.h     2009-05-10 23:48:28.000000000 +0200
+@@ -51,7 +51,6 @@
+       return (((counters >> 14) - counters) & 0x1fff) > 1;
+ }
+-#define __raw_spin_is_contended       __raw_spin_is_contended
+ static inline void __raw_spin_lock(raw_spinlock_t *lock)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/termios.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/termios.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/termios.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/termios.h      2009-05-10 23:48:28.000000000 +0200
+@@ -9,7 +9,6 @@
+ #ifndef _ASM_TERMIOS_H
+ #define _ASM_TERMIOS_H
+-#include <linux/errno.h>
+ #include <asm/termbits.h>
+ #include <asm/ioctls.h>
+@@ -95,81 +94,38 @@
+ /*
+  * Translate a "termio" structure into a "termios". Ugh.
+  */
+-static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+-      struct termio __user *termio)
+-{
+-      unsigned short iflag, oflag, cflag, lflag;
+-      unsigned int err;
+-
+-      if (!access_ok(VERIFY_READ, termio, sizeof(struct termio)))
+-              return -EFAULT;
+-
+-      err = __get_user(iflag, &termio->c_iflag);
+-      termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag;
+-      err |=__get_user(oflag, &termio->c_oflag);
+-      termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag;
+-      err |=__get_user(cflag, &termio->c_cflag);
+-      termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag;
+-      err |=__get_user(lflag, &termio->c_lflag);
+-      termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag;
+-      err |=__get_user(termios->c_line, &termio->c_line);
+-      if (err)
+-              return -EFAULT;
+-
+-      if (__copy_from_user(termios->c_cc, termio->c_cc, NCC))
+-              return -EFAULT;
+-
+-      return 0;
+-}
++#define user_termio_to_kernel_termios(termios, termio) \
++({ \
++      unsigned short tmp; \
++      get_user(tmp, &(termio)->c_iflag); \
++      (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
++      get_user(tmp, &(termio)->c_oflag); \
++      (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
++      get_user(tmp, &(termio)->c_cflag); \
++      (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
++      get_user(tmp, &(termio)->c_lflag); \
++      (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
++      get_user((termios)->c_line, &(termio)->c_line); \
++      copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
++})
+ /*
+  * Translate a "termios" structure into a "termio". Ugh.
+  */
+-static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+-      struct ktermios *termios)
+-{
+-      int err;
+-
+-      if (!access_ok(VERIFY_WRITE, termio, sizeof(struct termio)))
+-              return -EFAULT;
+-
+-      err = __put_user(termios->c_iflag, &termio->c_iflag);
+-      err |= __put_user(termios->c_oflag, &termio->c_oflag);
+-      err |= __put_user(termios->c_cflag, &termio->c_cflag);
+-      err |= __put_user(termios->c_lflag, &termio->c_lflag);
+-      err |= __put_user(termios->c_line, &termio->c_line);
+-      if (err)
+-              return -EFAULT;
+-
+-      if (__copy_to_user(termio->c_cc, termios->c_cc, NCC))
+-              return -EFAULT;
+-
+-      return 0;
+-}
+-
+-static inline int user_termios_to_kernel_termios(struct ktermios __user *k,
+-      struct termios2 *u)
+-{
+-      return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0;
+-}
+-
+-static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+-      struct ktermios *k)
+-{
+-      return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0;
+-}
+-
+-static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+-      struct termios __user *u)
+-{
+-      return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0;
+-}
+-
+-static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+-      struct ktermios *k)
+-{
+-      return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0;
+-}
++#define kernel_termios_to_user_termio(termio, termios) \
++({ \
++      put_user((termios)->c_iflag, &(termio)->c_iflag); \
++      put_user((termios)->c_oflag, &(termio)->c_oflag); \
++      put_user((termios)->c_cflag, &(termio)->c_cflag); \
++      put_user((termios)->c_lflag, &(termio)->c_lflag); \
++      put_user((termios)->c_line, &(termio)->c_line); \
++      copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
++})
++
++#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
++#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
++#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
++#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+ #endif /* defined(__KERNEL__) */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/thread_info.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/thread_info.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/thread_info.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/thread_info.h  2009-05-10 23:48:28.000000000 +0200
+@@ -127,12 +127,6 @@
+ #define TIF_LOAD_WATCH                25      /* If set, load watch registers */
+ #define TIF_SYSCALL_TRACE     31      /* syscall trace active */
+-#ifdef CONFIG_MIPS32_O32
+-#define TIF_32BIT TIF_32BIT_REGS
+-#elif defined(CONFIG_MIPS32_N32)
+-#define TIF_32BIT _TIF_32BIT_ADDR
+-#endif /* CONFIG_MIPS32_O32 */
+-
+ #define _TIF_SYSCALL_TRACE    (1<<TIF_SYSCALL_TRACE)
+ #define _TIF_SIGPENDING               (1<<TIF_SIGPENDING)
+ #define _TIF_NEED_RESCHED     (1<<TIF_NEED_RESCHED)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/include/asm/txx9/tx4939.h linux-2.6.29-rc3.owrt/arch/mips/include/asm/txx9/tx4939.h
+--- linux-2.6.29.owrt/arch/mips/include/asm/txx9/tx4939.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/include/asm/txx9/tx4939.h  2009-05-10 23:48:28.000000000 +0200
+@@ -541,6 +541,5 @@
+ int tx4939_irq(void);
+ void tx4939_mtd_init(int ch);
+ void tx4939_ata_init(void);
+-void tx4939_rtc_init(void);
+ #endif /* __ASM_TXX9_TX4939_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/Kconfig linux-2.6.29-rc3.owrt/arch/mips/Kconfig
+--- linux-2.6.29.owrt/arch/mips/Kconfig        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/Kconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -238,12 +238,8 @@
+         This option enables support for MIPS Technologies MIPSsim software
+         emulator.
+-config NEC_MARKEINS
+-      bool "NEC EMMA2RH Mark-eins board"
+-      select SOC_EMMA2RH
+-      select HW_HAS_PCI
+-      help
+-        This enables support for the NEC Electronics Mark-eins boards.
++config MACH_EMMA
++      bool "NEC EMMA series based machines"
+ config MACH_VR41XX
+       bool "NEC VR4100 series based machines"
+@@ -355,7 +351,7 @@
+       select ARC64
+       select BOOT_ELF64
+       select DEFAULT_SGI_PARTITION
+-      select DMA_COHERENT
++      select DMA_IP27
+       select SYS_HAS_EARLY_PRINTK
+       select HW_HAS_PCI
+       select NR_CPUS_DEFAULT_64
+@@ -607,7 +603,7 @@
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+-      select SYS_HAS_CPU_CAVIUM_OCTEON
++      select CPU_CAVIUM_OCTEON
+       help
+         The Octeon simulator is software performance model of the Cavium
+         Octeon Processor. It supports simulating Octeon processors on x86
+@@ -622,7 +618,7 @@
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+       select SYS_HAS_EARLY_PRINTK
+-      select SYS_HAS_CPU_CAVIUM_OCTEON
++      select CPU_CAVIUM_OCTEON
+       select SWAP_IO_SPACE
+       help
+         This option supports all of the Octeon reference boards from Cavium
+@@ -641,6 +637,7 @@
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
++source "arch/mips/emma/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
+@@ -764,6 +761,9 @@
+ config DMA_COHERENT
+       bool
++config DMA_IP27
++      bool
++
+ config DMA_NONCOHERENT
+       bool
+       select DMA_NEED_PCI_MAP_STATE
+@@ -904,18 +904,6 @@
+       bool
+       select SERIAL_RM9000
+-config SOC_EMMA2RH
+-      bool
+-      select CEVT_R4K
+-      select CSRC_R4K
+-      select DMA_NONCOHERENT
+-      select IRQ_CPU
+-      select SWAP_IO_SPACE
+-      select SYS_HAS_CPU_R5500
+-      select SYS_SUPPORTS_32BIT_KERNEL
+-      select SYS_SUPPORTS_64BIT_KERNEL
+-      select SYS_SUPPORTS_BIG_ENDIAN
+-
+ config SOC_PNX833X
+       bool
+       select CEVT_R4K
+@@ -951,6 +939,11 @@
+ config SWAP_IO_SPACE
+       bool
++config EMMA2RH
++      bool
++      depends on MARKEINS
++      default y
++
+ config SERIAL_RM9000
+       bool
+@@ -1250,7 +1243,6 @@
+ config CPU_CAVIUM_OCTEON
+       bool "Cavium Octeon processor"
+-      depends on SYS_HAS_CPU_CAVIUM_OCTEON
+       select IRQ_CPU
+       select IRQ_CPU_OCTEON
+       select CPU_HAS_PREFETCH
+@@ -1331,9 +1323,6 @@
+ config SYS_HAS_CPU_SB1
+       bool
+-config SYS_HAS_CPU_CAVIUM_OCTEON
+-      bool
+-
+ #
+ # CPU may reorder R->R, R->W, W->R, W->W
+ # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
+@@ -1385,7 +1374,7 @@
+ #
+ config HARDWARE_WATCHPOINTS
+        bool
+-       default y if CPU_MIPSR1 || CPU_MIPSR2
++       default y if CPU_MIPS32 || CPU_MIPS64
+ menu "Kernel type"
+@@ -1407,7 +1396,6 @@
+ config 64BIT
+       bool "64-bit kernel"
+       depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+-      select HAVE_SYSCALL_WRAPPERS
+       help
+         Select this option if you want to build a 64-bit kernel.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/cpu-probe.c linux-2.6.29-rc3.owrt/arch/mips/kernel/cpu-probe.c
+--- linux-2.6.29.owrt/arch/mips/kernel/cpu-probe.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/cpu-probe.c 2009-05-10 23:48:28.000000000 +0200
+@@ -149,7 +149,6 @@
+       case CPU_R4650:
+       case CPU_R4700:
+       case CPU_R5000:
+-      case CPU_R5500:
+       case CPU_NEVADA:
+       case CPU_4KC:
+       case CPU_4KEC:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/genex.S linux-2.6.29-rc3.owrt/arch/mips/kernel/genex.S
+--- linux-2.6.29.owrt/arch/mips/kernel/genex.S 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/genex.S     2009-05-10 23:48:28.000000000 +0200
+@@ -458,11 +458,7 @@
+       BUILD_HANDLER fpe fpe fpe silent                /* #15 */
+       BUILD_HANDLER mdmx mdmx sti silent              /* #22 */
+ #ifdef        CONFIG_HARDWARE_WATCHPOINTS
+-      /*
+-       * For watch, interrupts will be enabled after the watch
+-       * registers are read.
+-       */
+-      BUILD_HANDLER watch watch cli silent            /* #23 */
++      BUILD_HANDLER watch watch sti silent            /* #23 */
+ #else
+       BUILD_HANDLER watch watch sti verbose           /* #23 */
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/irq.c linux-2.6.29-rc3.owrt/arch/mips/kernel/irq.c
+--- linux-2.6.29.owrt/arch/mips/kernel/irq.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/irq.c       2009-05-10 23:48:28.000000000 +0200
+@@ -111,6 +111,7 @@
+                       seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ #endif
+               seq_printf(p, " %14s", irq_desc[i].chip->name);
++              seq_printf(p, "-%-8s", irq_desc[i].name);
+               seq_printf(p, "  %s", action->name);
+               for (action=action->next; action; action = action->next)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/linux32.c linux-2.6.29-rc3.owrt/arch/mips/kernel/linux32.c
+--- linux-2.6.29.owrt/arch/mips/kernel/linux32.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/linux32.c   2009-05-10 23:48:28.000000000 +0200
+@@ -32,7 +32,6 @@
+ #include <linux/module.h>
+ #include <linux/binfmts.h>
+ #include <linux/security.h>
+-#include <linux/syscalls.h>
+ #include <linux/compat.h>
+ #include <linux/vfs.h>
+ #include <linux/ipc.h>
+@@ -64,9 +63,9 @@
+ #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
+ #endif
+-SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+-      unsigned long, prot, unsigned long, flags, unsigned long, fd,
+-      unsigned long, pgoff)
++asmlinkage unsigned long
++sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
++         unsigned long flags, unsigned long fd, unsigned long pgoff)
+ {
+       struct file * file = NULL;
+       unsigned long error;
+@@ -122,21 +121,21 @@
+       int     rlim_max;
+ };
+-SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+-      unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
++asmlinkage long sys32_truncate64(const char __user * path,
++      unsigned long __dummy, int a2, int a3)
+ {
+       return sys_truncate(path, merge_64(a2, a3));
+ }
+-SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+-      unsigned long, a2, unsigned long, a3)
++asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
++      int a2, int a3)
+ {
+       return sys_ftruncate(fd, merge_64(a2, a3));
+ }
+-SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
+-      unsigned long, offset_low, loff_t __user *, result,
+-      unsigned long, origin)
++asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
++                          unsigned int offset_low, loff_t __user * result,
++                          unsigned int origin)
+ {
+       return sys_llseek(fd, offset_high, offset_low, result, origin);
+ }
+@@ -145,20 +144,20 @@
+    lseek back to original location.  They fail just like lseek does on
+    non-seekable files.  */
+-SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+-      unsigned long, unused, unsigned long, a4, unsigned long, a5)
++asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
++                             size_t count, u32 unused, u64 a4, u64 a5)
+ {
+       return sys_pread64(fd, buf, count, merge_64(a4, a5));
+ }
+-SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+-      size_t, count, u32, unused, u64, a4, u64, a5)
++asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
++                              size_t count, u32 unused, u64 a4, u64 a5)
+ {
+       return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
+ }
+-SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
+-      struct compat_timespec __user *, interval)
++asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
++      struct compat_timespec __user *interval)
+ {
+       struct timespec t;
+       int ret;
+@@ -175,8 +174,8 @@
+ #ifdef CONFIG_SYSVIPC
+-SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
+-      unsigned long, ptr, unsigned long, fifth)
++asmlinkage long
++sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+ {
+       int version, err;
+@@ -234,8 +233,8 @@
+ #else
+-SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
+-      u32, ptr, u32, fifth)
++asmlinkage long
++sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+ {
+       return -ENOSYS;
+ }
+@@ -243,7 +242,7 @@
+ #endif /* CONFIG_SYSVIPC */
+ #ifdef CONFIG_MIPS32_N32
+-SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
++asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
+ {
+       /* compat_sys_semctl expects a pointer to union semun */
+       u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
+@@ -252,14 +251,13 @@
+       return compat_sys_semctl(semid, semnum, cmd, uptr);
+ }
+-SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
+-      int, msgflg)
++asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+ {
+       return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
+ }
+-SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
+-      int, msgtyp, int, msgflg)
++asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
++                            int msgflg)
+ {
+       return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
+                                compat_ptr(msgp));
+@@ -279,7 +277,7 @@
+ #ifdef CONFIG_SYSCTL_SYSCALL
+-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
++asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
+ {
+       struct sysctl_args32 tmp;
+       int error;
+@@ -318,16 +316,9 @@
+       return error;
+ }
+-#else
+-
+-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
+-{
+-      return -ENOSYS;
+-}
+-
+ #endif /* CONFIG_SYSCTL_SYSCALL */
+-SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
++asmlinkage long sys32_newuname(struct new_utsname __user * name)
+ {
+       int ret = 0;
+@@ -343,7 +334,7 @@
+       return ret;
+ }
+-SYSCALL_DEFINE1(32_personality, unsigned long, personality)
++asmlinkage int sys32_personality(unsigned long personality)
+ {
+       int ret;
+       personality &= 0xffffffff;
+@@ -366,7 +357,7 @@
+ extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
+-SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
++asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
+ {
+       int err;
+       struct ustat tmp;
+@@ -390,8 +381,8 @@
+       return err;
+ }
+-SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
+-      compat_off_t __user *, offset, s32, count)
++asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
++      s32 count)
+ {
+       mm_segment_t old_fs = get_fs();
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/mips-mt-fpaff.c linux-2.6.29-rc3.owrt/arch/mips/kernel/mips-mt-fpaff.c
+--- linux-2.6.29.owrt/arch/mips/kernel/mips-mt-fpaff.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/mips-mt-fpaff.c     2009-05-10 23:48:28.000000000 +0200
+@@ -79,8 +79,7 @@
+       euid = current_euid();
+       retval = -EPERM;
+-      if (euid != p->cred->euid && euid != p->cred->uid &&
+-          !capable(CAP_SYS_NICE)) {
++      if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) {
+               read_unlock(&tasklist_lock);
+               goto out_unlock;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/scall32-o32.S linux-2.6.29-rc3.owrt/arch/mips/kernel/scall32-o32.S
+--- linux-2.6.29.owrt/arch/mips/kernel/scall32-o32.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/scall32-o32.S       2009-05-10 23:48:28.000000000 +0200
+@@ -399,7 +399,7 @@
+       sys     sys_swapon              2
+       sys     sys_reboot              3
+       sys     sys_old_readdir         3
+-      sys     sys_mips_mmap           6       /* 4090 */
++      sys     old_mmap                6       /* 4090 */
+       sys     sys_munmap              2
+       sys     sys_truncate            2
+       sys     sys_ftruncate           2
+@@ -519,7 +519,7 @@
+       sys     sys_sendfile            4
+       sys     sys_ni_syscall          0
+       sys     sys_ni_syscall          0
+-      sys     sys_mips_mmap2          6       /* 4210 */
++      sys     sys_mmap2               6       /* 4210 */
+       sys     sys_truncate64          4
+       sys     sys_ftruncate64         4
+       sys     sys_stat64              2
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/scall64-64.S linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-64.S
+--- linux-2.6.29.owrt/arch/mips/kernel/scall64-64.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-64.S        2009-05-10 23:48:28.000000000 +0200
+@@ -207,7 +207,7 @@
+       PTR     sys_newlstat
+       PTR     sys_poll
+       PTR     sys_lseek
+-      PTR     sys_mips_mmap
++      PTR     old_mmap
+       PTR     sys_mprotect                    /* 5010 */
+       PTR     sys_munmap
+       PTR     sys_brk
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/scall64-n32.S linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-n32.S
+--- linux-2.6.29.owrt/arch/mips/kernel/scall64-n32.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-n32.S       2009-05-10 23:48:28.000000000 +0200
+@@ -129,12 +129,12 @@
+       PTR     sys_newlstat
+       PTR     sys_poll
+       PTR     sys_lseek
+-      PTR     sys_mips_mmap
++      PTR     old_mmap
+       PTR     sys_mprotect                    /* 6010 */
+       PTR     sys_munmap
+       PTR     sys_brk
+-      PTR     sys_32_rt_sigaction
+-      PTR     sys_32_rt_sigprocmask
++      PTR     sys32_rt_sigaction
++      PTR     sys32_rt_sigprocmask
+       PTR     compat_sys_ioctl                /* 6015 */
+       PTR     sys_pread64
+       PTR     sys_pwrite64
+@@ -159,7 +159,7 @@
+       PTR     compat_sys_setitimer
+       PTR     sys_alarm
+       PTR     sys_getpid
+-      PTR     sys_32_sendfile
++      PTR     sys32_sendfile
+       PTR     sys_socket                      /* 6040 */
+       PTR     sys_connect
+       PTR     sys_accept
+@@ -181,14 +181,14 @@
+       PTR     sys_exit
+       PTR     compat_sys_wait4
+       PTR     sys_kill                        /* 6060 */
+-      PTR     sys_32_newuname
++      PTR     sys32_newuname
+       PTR     sys_semget
+       PTR     sys_semop
+-      PTR     sys_n32_semctl
++      PTR     sysn32_semctl
+       PTR     sys_shmdt                       /* 6065 */
+       PTR     sys_msgget
+-      PTR     sys_n32_msgsnd
+-      PTR     sys_n32_msgrcv
++      PTR     sysn32_msgsnd
++      PTR     sysn32_msgrcv
+       PTR     compat_sys_msgctl
+       PTR     compat_sys_fcntl                /* 6070 */
+       PTR     sys_flock
+@@ -245,15 +245,15 @@
+       PTR     sys_getsid
+       PTR     sys_capget
+       PTR     sys_capset
+-      PTR     sys_32_rt_sigpending            /* 6125 */
++      PTR     sys32_rt_sigpending             /* 6125 */
+       PTR     compat_sys_rt_sigtimedwait
+-      PTR     sys_32_rt_sigqueueinfo
++      PTR     sys32_rt_sigqueueinfo
+       PTR     sysn32_rt_sigsuspend
+       PTR     sys32_sigaltstack
+       PTR     compat_sys_utime                /* 6130 */
+       PTR     sys_mknod
+-      PTR     sys_32_personality
+-      PTR     sys_32_ustat
++      PTR     sys32_personality
++      PTR     sys32_ustat
+       PTR     compat_sys_statfs
+       PTR     compat_sys_fstatfs              /* 6135 */
+       PTR     sys_sysfs
+@@ -265,14 +265,14 @@
+       PTR     sys_sched_getscheduler
+       PTR     sys_sched_get_priority_max
+       PTR     sys_sched_get_priority_min
+-      PTR     sys_32_sched_rr_get_interval    /* 6145 */
++      PTR     sys32_sched_rr_get_interval     /* 6145 */
+       PTR     sys_mlock
+       PTR     sys_munlock
+       PTR     sys_mlockall
+       PTR     sys_munlockall
+       PTR     sys_vhangup                     /* 6150 */
+       PTR     sys_pivot_root
+-      PTR     sys_32_sysctl
++      PTR     sys32_sysctl
+       PTR     sys_prctl
+       PTR     compat_sys_adjtimex
+       PTR     compat_sys_setrlimit            /* 6155 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/scall64-o32.S linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-o32.S
+--- linux-2.6.29.owrt/arch/mips/kernel/scall64-o32.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/scall64-o32.S       2009-05-10 23:48:28.000000000 +0200
+@@ -265,12 +265,12 @@
+       PTR     sys_olduname
+       PTR     sys_umask                       /* 4060 */
+       PTR     sys_chroot
+-      PTR     sys_32_ustat
++      PTR     sys32_ustat
+       PTR     sys_dup2
+       PTR     sys_getppid
+       PTR     sys_getpgrp                     /* 4065 */
+       PTR     sys_setsid
+-      PTR     sys_32_sigaction
++      PTR     sys32_sigaction
+       PTR     sys_sgetmask
+       PTR     sys_ssetmask
+       PTR     sys_setreuid                    /* 4070 */
+@@ -293,7 +293,7 @@
+       PTR     sys_swapon
+       PTR     sys_reboot
+       PTR     compat_sys_old_readdir
+-      PTR     sys_mips_mmap                   /* 4090 */
++      PTR     old_mmap                        /* 4090 */
+       PTR     sys_munmap
+       PTR     sys_truncate
+       PTR     sys_ftruncate
+@@ -320,12 +320,12 @@
+       PTR     compat_sys_wait4
+       PTR     sys_swapoff                     /* 4115 */
+       PTR     compat_sys_sysinfo
+-      PTR     sys_32_ipc
++      PTR     sys32_ipc
+       PTR     sys_fsync
+       PTR     sys32_sigreturn
+       PTR     sys32_clone                     /* 4120 */
+       PTR     sys_setdomainname
+-      PTR     sys_32_newuname
++      PTR     sys32_newuname
+       PTR     sys_ni_syscall                  /* sys_modify_ldt */
+       PTR     compat_sys_adjtimex
+       PTR     sys_mprotect                    /* 4125 */
+@@ -339,11 +339,11 @@
+       PTR     sys_fchdir
+       PTR     sys_bdflush
+       PTR     sys_sysfs                       /* 4135 */
+-      PTR     sys_32_personality
++      PTR     sys32_personality
+       PTR     sys_ni_syscall                  /* for afs_syscall */
+       PTR     sys_setfsuid
+       PTR     sys_setfsgid
+-      PTR     sys_32_llseek                   /* 4140 */
++      PTR     sys32_llseek                    /* 4140 */
+       PTR     compat_sys_getdents
+       PTR     compat_sys_select
+       PTR     sys_flock
+@@ -356,7 +356,7 @@
+       PTR     sys_ni_syscall                  /* 4150 */
+       PTR     sys_getsid
+       PTR     sys_fdatasync
+-      PTR     sys_32_sysctl
++      PTR     sys32_sysctl
+       PTR     sys_mlock
+       PTR     sys_munlock                     /* 4155 */
+       PTR     sys_mlockall
+@@ -368,7 +368,7 @@
+       PTR     sys_sched_yield
+       PTR     sys_sched_get_priority_max
+       PTR     sys_sched_get_priority_min
+-      PTR     sys_32_sched_rr_get_interval    /* 4165 */
++      PTR     sys32_sched_rr_get_interval     /* 4165 */
+       PTR     compat_sys_nanosleep
+       PTR     sys_mremap
+       PTR     sys_accept
+@@ -397,25 +397,25 @@
+       PTR     sys_getresgid
+       PTR     sys_prctl
+       PTR     sys32_rt_sigreturn
+-      PTR     sys_32_rt_sigaction
+-      PTR     sys_32_rt_sigprocmask           /* 4195 */
+-      PTR     sys_32_rt_sigpending
++      PTR     sys32_rt_sigaction
++      PTR     sys32_rt_sigprocmask            /* 4195 */
++      PTR     sys32_rt_sigpending
+       PTR     compat_sys_rt_sigtimedwait
+-      PTR     sys_32_rt_sigqueueinfo
++      PTR     sys32_rt_sigqueueinfo
+       PTR     sys32_rt_sigsuspend
+-      PTR     sys_32_pread                    /* 4200 */
+-      PTR     sys_32_pwrite
++      PTR     sys32_pread                     /* 4200 */
++      PTR     sys32_pwrite
+       PTR     sys_chown
+       PTR     sys_getcwd
+       PTR     sys_capget
+       PTR     sys_capset                      /* 4205 */
+       PTR     sys32_sigaltstack
+-      PTR     sys_32_sendfile
++      PTR     sys32_sendfile
+       PTR     sys_ni_syscall
+       PTR     sys_ni_syscall
+-      PTR     sys_mips_mmap2                  /* 4210 */
+-      PTR     sys_32_truncate64
+-      PTR     sys_32_ftruncate64
++      PTR     sys32_mmap2                     /* 4210 */
++      PTR     sys32_truncate64
++      PTR     sys32_ftruncate64
+       PTR     sys_newstat
+       PTR     sys_newlstat
+       PTR     sys_newfstat                    /* 4215 */
+@@ -481,7 +481,7 @@
+       PTR     compat_sys_mq_notify            /* 4275 */
+       PTR     compat_sys_mq_getsetattr
+       PTR     sys_ni_syscall                  /* sys_vserver */
+-      PTR     sys_32_waitid
++      PTR     sys32_waitid
+       PTR     sys_ni_syscall                  /* available, was setaltroot */
+       PTR     sys_add_key                     /* 4280 */
+       PTR     sys_request_key
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/signal32.c linux-2.6.29-rc3.owrt/arch/mips/kernel/signal32.c
+--- linux-2.6.29.owrt/arch/mips/kernel/signal32.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/signal32.c  2009-05-10 23:48:28.000000000 +0200
+@@ -349,8 +349,8 @@
+       return -ERESTARTNOHAND;
+ }
+-SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
+-      struct sigaction32 __user *, oact)
++asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
++                               struct sigaction32 __user *oact)
+ {
+       struct k_sigaction new_ka, old_ka;
+       int ret;
+@@ -704,9 +704,9 @@
+       .restart        = __NR_O32_restart_syscall
+ };
+-SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
+-      const struct sigaction32 __user *, act,
+-      struct sigaction32 __user *, oact, unsigned int, sigsetsize)
++asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
++                                struct sigaction32 __user *oact,
++                                unsigned int sigsetsize)
+ {
+       struct k_sigaction new_sa, old_sa;
+       int ret = -EINVAL;
+@@ -748,8 +748,8 @@
+       return ret;
+ }
+-SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
+-      compat_sigset_t __user *, oset, unsigned int, sigsetsize)
++asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
++      compat_sigset_t __user *oset, unsigned int sigsetsize)
+ {
+       sigset_t old_set, new_set;
+       int ret;
+@@ -770,8 +770,8 @@
+       return ret;
+ }
+-SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
+-      unsigned int, sigsetsize)
++asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
++      unsigned int sigsetsize)
+ {
+       int ret;
+       sigset_t set;
+@@ -787,8 +787,7 @@
+       return ret;
+ }
+-SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
+-      compat_siginfo_t __user *, uinfo)
++asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+ {
+       siginfo_t info;
+       int ret;
+@@ -803,9 +802,10 @@
+       return ret;
+ }
+-SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
+-           compat_siginfo_t __user *, uinfo, int, options,
+-           struct compat_rusage __user *, uru)
++asmlinkage long
++sys32_waitid(int which, compat_pid_t pid,
++           compat_siginfo_t __user *uinfo, int options,
++           struct compat_rusage __user *uru)
+ {
+       siginfo_t info;
+       struct rusage ru;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/signal.c linux-2.6.29-rc3.owrt/arch/mips/kernel/signal.c
+--- linux-2.6.29.owrt/arch/mips/kernel/signal.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/signal.c    2009-05-10 23:48:28.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/ptrace.h>
+ #include <linux/unistd.h>
+ #include <linux/compiler.h>
+-#include <linux/syscalls.h>
+ #include <linux/uaccess.h>
+ #include <asm/abi.h>
+@@ -339,8 +338,8 @@
+ }
+ #ifdef CONFIG_TRAD_SIGNALS
+-SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+-      struct sigaction __user *, oact)
++asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
++      struct sigaction __user *oact)
+ {
+       struct k_sigaction new_ka, old_ka;
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/syscall.c linux-2.6.29-rc3.owrt/arch/mips/kernel/syscall.c
+--- linux-2.6.29.owrt/arch/mips/kernel/syscall.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/syscall.c   2009-05-10 23:48:28.000000000 +0200
+@@ -152,9 +152,9 @@
+       return error;
+ }
+-SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+-      unsigned long, prot, unsigned long, flags, unsigned long,
+-      fd, off_t, offset)
++asmlinkage unsigned long
++old_mmap(unsigned long addr, unsigned long len, int prot,
++      int flags, int fd, off_t offset)
+ {
+       unsigned long result;
+@@ -168,9 +168,9 @@
+       return result;
+ }
+-SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+-      unsigned long, prot, unsigned long, flags, unsigned long, fd,
+-      unsigned long, pgoff)
++asmlinkage unsigned long
++sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
++          unsigned long flags, unsigned long fd, unsigned long pgoff)
+ {
+       if (pgoff & (~PAGE_MASK >> 12))
+               return -EINVAL;
+@@ -240,7 +240,7 @@
+ /*
+  * Compacrapability ...
+  */
+-SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
++asmlinkage int sys_uname(struct old_utsname __user * name)
+ {
+       if (name && !copy_to_user(name, utsname(), sizeof (*name)))
+               return 0;
+@@ -250,7 +250,7 @@
+ /*
+  * Compacrapability ...
+  */
+-SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
++asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+ {
+       int error;
+@@ -279,7 +279,7 @@
+       return error;
+ }
+-SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
++asmlinkage int sys_set_thread_area(unsigned long addr)
+ {
+       struct thread_info *ti = task_thread_info(current);
+@@ -290,7 +290,7 @@
+       return 0;
+ }
+-asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
++asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
+ {
+       switch (cmd) {
+       case MIPS_ATOMIC_SET:
+@@ -325,8 +325,8 @@
+  *
+  * This is really horribly ugly.
+  */
+-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+-      unsigned long, third, void __user *, ptr, long, fifth)
++asmlinkage int sys_ipc(unsigned int call, int first, int second,
++                     unsigned long third, void __user *ptr, long fifth)
+ {
+       int version, ret;
+@@ -411,7 +411,7 @@
+ /*
+  * No implemented yet ...
+  */
+-SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
++asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+ {
+       return -ENOSYS;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/kernel/traps.c linux-2.6.29-rc3.owrt/arch/mips/kernel/traps.c
+--- linux-2.6.29.owrt/arch/mips/kernel/traps.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/kernel/traps.c     2009-05-10 23:48:28.000000000 +0200
+@@ -944,9 +944,6 @@
+       force_sig(SIGILL, current);
+ }
+-/*
+- * Called with interrupts disabled.
+- */
+ asmlinkage void do_watch(struct pt_regs *regs)
+ {
+       u32 cause;
+@@ -966,12 +963,9 @@
+        */
+       if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+               mips_read_watch_registers();
+-              local_irq_enable();
+               force_sig(SIGTRAP, current);
+-      } else {
++      } else
+               mips_clear_watch_registers();
+-              local_irq_enable();
+-      }
+ }
+ asmlinkage void do_mcheck(struct pt_regs *regs)
+@@ -1588,11 +1582,7 @@
+ static char panic_null_cerr[] __cpuinitdata =
+       "Trying to set NULL cache error exception handler";
+-/*
+- * Install uncached CPU exception handler.
+- * This is suitable only for the cache error exception which is the only
+- * exception handler that is being run uncached.
+- */
++/* Install uncached CPU exception handler */
+ void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
+       unsigned long size)
+ {
+@@ -1603,7 +1593,7 @@
+       unsigned long uncached_ebase = TO_UNCAC(ebase);
+ #endif
+       if (cpu_has_mips_r2)
+-              uncached_ebase += (read_c0_ebase() & 0x3ffff000);
++              ebase += (read_c0_ebase() & 0x3ffff000);
+       if (!addr)
+               panic(panic_null_cerr);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/lib/memcpy-inatomic.S linux-2.6.29-rc3.owrt/arch/mips/lib/memcpy-inatomic.S
+--- linux-2.6.29.owrt/arch/mips/lib/memcpy-inatomic.S  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/lib/memcpy-inatomic.S      2009-05-10 23:48:28.000000000 +0200
+@@ -21,7 +21,7 @@
+  * end of memory on some systems.  It's also a seriously bad idea on non
+  * dma-coherent systems.
+  */
+-#ifdef CONFIG_DMA_NONCOHERENT
++#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+ #undef CONFIG_CPU_HAS_PREFETCH
+ #endif
+ #ifdef CONFIG_MIPS_MALTA
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/lib/memcpy.S linux-2.6.29-rc3.owrt/arch/mips/lib/memcpy.S
+--- linux-2.6.29.owrt/arch/mips/lib/memcpy.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/lib/memcpy.S       2009-05-10 23:48:28.000000000 +0200
+@@ -21,7 +21,7 @@
+  * end of memory on some systems.  It's also a seriously bad idea on non
+  * dma-coherent systems.
+  */
+-#ifdef CONFIG_DMA_NONCOHERENT
++#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+ #undef CONFIG_CPU_HAS_PREFETCH
+ #endif
+ #ifdef CONFIG_MIPS_MALTA
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/Makefile linux-2.6.29-rc3.owrt/arch/mips/Makefile
+--- linux-2.6.29.owrt/arch/mips/Makefile       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/Makefile   2009-05-10 23:48:28.000000000 +0200
+@@ -416,7 +416,7 @@
+ #
+ # Common NEC EMMAXXX
+ #
+-core-$(CONFIG_SOC_EMMA2RH)    += arch/mips/emma/common/
++core-$(CONFIG_SOC_EMMA)               += arch/mips/emma/common/
+ cflags-$(CONFIG_SOC_EMMA2RH)  += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
+ #
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/mm/cache.c linux-2.6.29-rc3.owrt/arch/mips/mm/cache.c
+--- linux-2.6.29.owrt/arch/mips/mm/cache.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/mm/cache.c 2009-05-10 23:48:28.000000000 +0200
+@@ -13,7 +13,6 @@
+ #include <linux/linkage.h>
+ #include <linux/module.h>
+ #include <linux/sched.h>
+-#include <linux/syscalls.h>
+ #include <linux/mm.h>
+ #include <asm/cacheflush.h>
+@@ -59,8 +58,8 @@
+  * We could optimize the case where the cache argument is not BCACHE but
+  * that seems very atypical use ...
+  */
+-SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
+-      unsigned int, cache)
++asmlinkage int sys_cacheflush(unsigned long addr,
++      unsigned long bytes, unsigned int cache)
+ {
+       if (bytes == 0)
+               return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/mm/c-r4k.c linux-2.6.29-rc3.owrt/arch/mips/mm/c-r4k.c
+--- linux-2.6.29.owrt/arch/mips/mm/c-r4k.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/mm/c-r4k.c 2009-05-10 23:48:28.000000000 +0200
+@@ -618,35 +618,15 @@
+       if (cpu_has_inclusive_pcaches) {
+               if (size >= scache_size)
+                       r4k_blast_scache();
+-              else {
+-                      unsigned long lsize = cpu_scache_line_size();
+-                      unsigned long almask = ~(lsize - 1);
+-
+-                      /*
+-                       * There is no clearly documented alignment requirement
+-                       * for the cache instruction on MIPS processors and
+-                       * some processors, among them the RM5200 and RM7000
+-                       * QED processors will throw an address error for cache
+-                       * hit ops with insufficient alignment.  Solved by
+-                       * aligning the address to cache line size.
+-                       */
+-                      cache_op(Hit_Writeback_Inv_SD, addr & almask);
+-                      cache_op(Hit_Writeback_Inv_SD,
+-                               (addr + size - 1) & almask);
++              else
+                       blast_inv_scache_range(addr, addr + size);
+-              }
+               return;
+       }
+       if (cpu_has_safe_index_cacheops && size >= dcache_size) {
+               r4k_blast_dcache();
+       } else {
+-              unsigned long lsize = cpu_dcache_line_size();
+-              unsigned long almask = ~(lsize - 1);
+-
+               R4600_HIT_CACHEOP_WAR_IMPL;
+-              cache_op(Hit_Writeback_Inv_D, addr & almask);
+-              cache_op(Hit_Writeback_Inv_D, (addr + size - 1)  & almask);
+               blast_inv_dcache_range(addr, addr + size);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/mm/fault.c linux-2.6.29-rc3.owrt/arch/mips/mm/fault.c
+--- linux-2.6.29.owrt/arch/mips/mm/fault.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/mm/fault.c 2009-05-10 23:48:28.000000000 +0200
+@@ -97,6 +97,7 @@
+                       goto bad_area;
+       }
++survive:
+       /*
+        * If for any reason at all we couldn't handle the fault,
+        * make sure we exit gracefully rather than endlessly redo
+@@ -166,13 +167,21 @@
+              field,  regs->regs[31]);
+       die("Oops", regs);
++/*
++ * We ran out of memory, or some other thing happened to us that made
++ * us unable to handle the page fault gracefully.
++ */
+ out_of_memory:
+-      /*
+-       * We ran out of memory, call the OOM killer, and return the userspace
+-       * (which will retry the fault, or kill us if we got oom-killed).
+-       */
+-      pagefault_out_of_memory();
+-      return;
++      up_read(&mm->mmap_sem);
++      if (is_global_init(tsk)) {
++              yield();
++              down_read(&mm->mmap_sem);
++              goto survive;
++      }
++      printk("VM: killing process %s\n", tsk->comm);
++      if (user_mode(regs))
++              do_group_exit(SIGKILL);
++      goto no_context;
+ do_sigbus:
+       up_read(&mm->mmap_sem);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/mm/page.c linux-2.6.29-rc3.owrt/arch/mips/mm/page.c
+--- linux-2.6.29.owrt/arch/mips/mm/page.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/mm/page.c  2009-05-10 23:48:28.000000000 +0200
+@@ -172,9 +172,8 @@
+                */
+               cache_line_size = cpu_dcache_line_size();
+               switch (current_cpu_type()) {
+-              case CPU_R5500:
+               case CPU_TX49XX:
+-                      /* These processors only support the Pref_Load. */
++                      /* TX49 supports only Pref_Load */
+                       pref_bias_copy_load = 256;
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/mm/tlbex.c linux-2.6.29-rc3.owrt/arch/mips/mm/tlbex.c
+--- linux-2.6.29.owrt/arch/mips/mm/tlbex.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/mm/tlbex.c 2009-05-10 23:48:28.000000000 +0200
+@@ -318,7 +318,6 @@
+       case CPU_BCM4710:
+       case CPU_LOONGSON2:
+       case CPU_CAVIUM_OCTEON:
+-      case CPU_R5500:
+               if (m4kc_tlbp_war())
+                       uasm_i_nop(p);
+               tlbw(p);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/pci/pci-rc32434.c linux-2.6.29-rc3.owrt/arch/mips/pci/pci-rc32434.c
+--- linux-2.6.29.owrt/arch/mips/pci/pci-rc32434.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/pci/pci-rc32434.c  2009-05-10 23:48:28.000000000 +0200
+@@ -205,8 +205,6 @@
+ static int __init rc32434_pci_init(void)
+ {
+-      void __iomem *io_map_base;
+-
+       pr_info("PCI: Initializing PCI\n");
+       ioport_resource.start = rc32434_res_pci_io1.start;
+@@ -214,15 +212,6 @@
+       rc32434_pcibridge_init();
+-      io_map_base = ioremap(rc32434_res_pci_io1.start,
+-              rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
+-
+-      if (!io_map_base)
+-              return -ENOMEM;
+-
+-      rc32434_controller.io_map_base =
+-              (unsigned long)io_map_base - rc32434_res_pci_io1.start;
+-
+       register_pci_controller(&rc32434_controller);
+       rc32434_sync();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/rb532/devices.c linux-2.6.29-rc3.owrt/arch/mips/rb532/devices.c
+--- linux-2.6.29.owrt/arch/mips/rb532/devices.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/rb532/devices.c    2009-05-10 23:48:28.000000000 +0200
+@@ -24,7 +24,6 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
+-#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+@@ -40,29 +39,6 @@
+ #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+ #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+-extern unsigned int idt_cpu_freq;
+-
+-static struct mpmc_device dev3;
+-
+-void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+-{
+-      unsigned long flags;
+-
+-      spin_lock_irqsave(&dev3.lock, flags);
+-
+-      dev3.state = (dev3.state | or_mask) & ~nand_mask;
+-      writeb(dev3.state, dev3.base);
+-
+-      spin_unlock_irqrestore(&dev3.lock, flags);
+-}
+-EXPORT_SYMBOL(set_latch_u5);
+-
+-unsigned char get_latch_u5(void)
+-{
+-      return dev3.state;
+-}
+-EXPORT_SYMBOL(get_latch_u5);
+-
+ static struct resource korina_dev0_res[] = {
+       {
+               .name = "korina_regs",
+@@ -110,7 +86,7 @@
+ static struct platform_device korina_dev0 = {
+       .id = -1,
+       .name = "korina",
+-      .dev.driver_data = &korina_dev0_data,
++      .dev.platform_data = &korina_dev0_data,
+       .resource = korina_dev0_res,
+       .num_resources = ARRAY_SIZE(korina_dev0_res),
+ };
+@@ -238,32 +214,12 @@
+       .num_resources  = ARRAY_SIZE(rb532_wdt_res),
+ };
+-static struct plat_serial8250_port rb532_uart_res[] = {
+-      {
+-              .membase        = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+-              .irq            = UART0_IRQ,
+-              .regshift       = 2,
+-              .iotype         = UPIO_MEM,
+-              .flags          = UPF_BOOT_AUTOCONF,
+-      },
+-      {
+-              .flags          = 0,
+-      }
+-};
+-
+-static struct platform_device rb532_uart = {
+-      .name              = "serial8250",
+-      .id                = PLAT8250_DEV_PLATFORM,
+-      .dev.platform_data = &rb532_uart_res,
+-};
+-
+ static struct platform_device *rb532_devs[] = {
+       &korina_dev0,
+       &nand_slot0,
+       &cf_slot0,
+       &rb532_led,
+       &rb532_button,
+-      &rb532_uart,
+       &rb532_wdt
+ };
+@@ -335,20 +291,9 @@
+       nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
+       nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+-      /* Read and map device controller 3 */
+-      dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
+-
+-      if (!dev3.base) {
+-              printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+-              return -ENXIO;
+-      }
+-
+       /* Initialise the NAND device */
+       rb532_nand_setup();
+-      /* set the uart clock to the current cpu frequency */
+-      rb532_uart_res[0].uartclk = idt_cpu_freq;
+-
+       return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/rb532/gpio.c linux-2.6.29-rc3.owrt/arch/mips/rb532/gpio.c
+--- linux-2.6.29.owrt/arch/mips/rb532/gpio.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/rb532/gpio.c       2009-05-10 23:48:28.000000000 +0200
+@@ -41,6 +41,8 @@
+       void __iomem     *regbase;
+ };
++struct mpmc_device dev3;
++
+ static struct resource rb532_gpio_reg0_res[] = {
+       {
+               .name   = "gpio_reg0",
+@@ -50,6 +52,61 @@
+       }
+ };
++static struct resource rb532_dev3_ctl_res[] = {
++      {
++              .name   = "dev3_ctl",
++              .start  = REGBASE + DEV3BASE,
++              .end    = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
++              .flags  = IORESOURCE_MEM,
++      }
++};
++
++void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
++{
++      unsigned long flags;
++      unsigned data;
++      unsigned i = 0;
++
++      spin_lock_irqsave(&dev3.lock, flags);
++
++      data = readl(IDT434_REG_BASE + reg_offs);
++      for (i = 0; i != len; ++i) {
++              if (val & (1 << i))
++                      data |= (1 << (i + bit));
++              else
++                      data &= ~(1 << (i + bit));
++      }
++      writel(data, (IDT434_REG_BASE + reg_offs));
++
++      spin_unlock_irqrestore(&dev3.lock, flags);
++}
++EXPORT_SYMBOL(set_434_reg);
++
++unsigned get_434_reg(unsigned reg_offs)
++{
++      return readl(IDT434_REG_BASE + reg_offs);
++}
++EXPORT_SYMBOL(get_434_reg);
++
++void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&dev3.lock, flags);
++
++      dev3.state = (dev3.state | or_mask) & ~nand_mask;
++      writel(dev3.state, &dev3.base);
++
++      spin_unlock_irqrestore(&dev3.lock, flags);
++}
++EXPORT_SYMBOL(set_latch_u5);
++
++unsigned char get_latch_u5(void)
++{
++      return dev3.state;
++}
++EXPORT_SYMBOL(get_latch_u5);
++
+ /* rb532_set_bit - sanely set a bit
+  *
+  * bitval: new value for the bit
+@@ -62,11 +119,13 @@
+       unsigned long flags;
+       u32 val;
++      bitval = !!bitval;              /* map parameter to {0,1} */
++
+       local_irq_save(flags);
+       val = readl(ioaddr);
+-      val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
+-      val |= (!!bitval << offset);   /* set bit if bitval == 1 */
++      val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
++      val |=  (  bitval << offset );   /* set bit if bitval == 1 */
+       writel(val, ioaddr);
+       local_irq_restore(flags);
+@@ -112,8 +171,8 @@
+       gpch = container_of(chip, struct rb532_gpio_chip, chip);
+-      /* disable alternate function in case it's set */
+-      rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
++      if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
++              return 1;       /* alternate function, GPIOCFG is ignored */
+       rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
+       return 0;
+@@ -129,8 +188,8 @@
+       gpch = container_of(chip, struct rb532_gpio_chip, chip);
+-      /* disable alternate function in case it's set */
+-      rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
++      if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
++              return 1;       /* alternate function, GPIOCFG is ignored */
+       /* set the initial output value */
+       rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+@@ -174,11 +233,10 @@
+ /*
+  * Configure GPIO alternate function
+  */
+-void rb532_gpio_set_func(unsigned gpio)
++static void rb532_gpio_set_func(int bit, unsigned gpio)
+ {
+-       rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
++       rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
+ }
+-EXPORT_SYMBOL(rb532_gpio_set_func);
+ int __init rb532_gpio_init(void)
+ {
+@@ -195,6 +253,20 @@
+       /* Register our GPIO chip */
+       gpiochip_add(&rb532_gpio_chip->chip);
++      r = rb532_dev3_ctl_res;
++      dev3.base = ioremap_nocache(r->start, r->end - r->start);
++
++      if (!dev3.base) {
++              printk(KERN_ERR "rb532: cannot remap device controller 3\n");
++              return -ENXIO;
++      }
++
++      /* configure CF_GPIO_NUM as CFRDY IRQ source */
++      rb532_gpio_set_func(0, CF_GPIO_NUM);
++      rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
++      rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
++      rb532_gpio_set_istat(0, CF_GPIO_NUM);
++
+       return 0;
+ }
+ arch_initcall(rb532_gpio_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/rb532/irq.c linux-2.6.29-rc3.owrt/arch/mips/rb532/irq.c
+--- linux-2.6.29.owrt/arch/mips/rb532/irq.c    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/rb532/irq.c        2009-05-10 23:48:28.000000000 +0200
+@@ -46,7 +46,6 @@
+ #include <asm/system.h>
+ #include <asm/mach-rc32434/irq.h>
+-#include <asm/mach-rc32434/gpio.h>
+ struct intr_group {
+       u32 mask;       /* mask of valid bits in pending/mask registers */
+@@ -151,9 +150,6 @@
+               mask |= intr_bit;
+               WRITE_MASK(addr, mask);
+-              if (group == GPIO_MAPPED_IRQ_GROUP)
+-                      rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE);
+-
+               /*
+                * if there are no more interrupts enabled in this
+                * group, disable corresponding IP
+@@ -169,35 +165,12 @@
+       ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+ }
+-static int rb532_set_type(unsigned int irq_nr, unsigned type)
+-{
+-      int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE;
+-      int group = irq_to_group(irq_nr);
+-
+-      if (group != GPIO_MAPPED_IRQ_GROUP)
+-              return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL;
+-
+-      switch (type) {
+-      case IRQ_TYPE_LEVEL_HIGH:
+-              rb532_gpio_set_ilevel(1, gpio);
+-              break;
+-      case IRQ_TYPE_LEVEL_LOW:
+-              rb532_gpio_set_ilevel(0, gpio);
+-              break;
+-      default:
+-              return -EINVAL;
+-      }
+-
+-      return 0;
+-}
+-
+ static struct irq_chip rc32434_irq_type = {
+       .name           = "RB532",
+       .ack            = rb532_disable_irq,
+       .mask           = rb532_disable_irq,
+       .mask_ack       = rb532_mask_and_ack_irq,
+       .unmask         = rb532_enable_irq,
+-      .set_type       = rb532_set_type,
+ };
+ void __init arch_init_irq(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/rb532/serial.c linux-2.6.29-rc3.owrt/arch/mips/rb532/serial.c
+--- linux-2.6.29.owrt/arch/mips/rb532/serial.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/rb532/serial.c     2009-05-10 23:48:28.000000000 +0200
+@@ -36,7 +36,7 @@
+ extern unsigned int idt_cpu_freq;
+ static struct uart_port rb532_uart = {
+-      .flags = UPF_BOOT_AUTOCONF,
++      .type = PORT_16550A,
+       .line = 0,
+       .irq = UART0_IRQ,
+       .iotype = UPIO_MEM,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/txx9/generic/setup_tx4939.c linux-2.6.29-rc3.owrt/arch/mips/txx9/generic/setup_tx4939.c
+--- linux-2.6.29.owrt/arch/mips/txx9/generic/setup_tx4939.c    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/txx9/generic/setup_tx4939.c        2009-05-10 23:48:28.000000000 +0200
+@@ -435,28 +435,6 @@
+               platform_device_register(&ata1_dev);
+ }
+-void __init tx4939_rtc_init(void)
+-{
+-      static struct resource res[] = {
+-              {
+-                      .start = TX4939_RTC_REG & 0xfffffffffULL,
+-                      .end = (TX4939_RTC_REG & 0xfffffffffULL) + 0x100 - 1,
+-                      .flags = IORESOURCE_MEM,
+-              }, {
+-                      .start = TXX9_IRQ_BASE + TX4939_IR_RTC,
+-                      .flags = IORESOURCE_IRQ,
+-              },
+-      };
+-      static struct platform_device rtc_dev = {
+-              .name = "tx4939rtc",
+-              .id = -1,
+-              .num_resources = ARRAY_SIZE(res),
+-              .resource = res,
+-      };
+-
+-      platform_device_register(&rtc_dev);
+-}
+-
+ static void __init tx4939_stop_unused_modules(void)
+ {
+       __u64 pcfg, rst = 0, ckd = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mips/txx9/rbtx4939/setup.c linux-2.6.29-rc3.owrt/arch/mips/txx9/rbtx4939/setup.c
+--- linux-2.6.29.owrt/arch/mips/txx9/rbtx4939/setup.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mips/txx9/rbtx4939/setup.c      2009-05-10 23:48:28.000000000 +0200
+@@ -336,7 +336,6 @@
+       rbtx4939_led_setup();
+       tx4939_wdt_init();
+       tx4939_ata_init();
+-      tx4939_rtc_init();
+ }
+ static void __init rbtx4939_setup(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mn10300/Kconfig linux-2.6.29-rc3.owrt/arch/mn10300/Kconfig
+--- linux-2.6.29.owrt/arch/mn10300/Kconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mn10300/Kconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -7,7 +7,6 @@
+ config MN10300
+       def_bool y
+-      select HAVE_OPROFILE
+ config AM33
+       def_bool y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/mn10300/unit-asb2305/pci.c linux-2.6.29-rc3.owrt/arch/mn10300/unit-asb2305/pci.c
+--- linux-2.6.29.owrt/arch/mn10300/unit-asb2305/pci.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/mn10300/unit-asb2305/pci.c      2009-05-10 23:48:28.000000000 +0200
+@@ -173,7 +173,7 @@
+               BRIDGEREGB(where) = value;
+       } else {
+               if (bus->number == 0 &&
+-                  (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
++                  (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+                   )
+                       __pcidebug("<= %02x", bus, devfn, where, value);
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/configs/712_defconfig linux-2.6.29-rc3.owrt/arch/parisc/configs/712_defconfig
+--- linux-2.6.29.owrt/arch/parisc/configs/712_defconfig        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/configs/712_defconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 01:32:55 2009
++# Linux kernel version: 2.6.23
++# Fri Oct 12 21:00:07 2007
+ #
+ CONFIG_PARISC=y
+ CONFIG_MMU=y
+@@ -33,35 +33,17 @@
+ CONFIG_POSIX_MQUEUE=y
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=16
+-# CONFIG_GROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+-CONFIG_NAMESPACES=y
+-# CONFIG_UTS_NS is not set
+-# CONFIG_IPC_NS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+-# CONFIG_NET_NS is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+ # CONFIG_EMBEDDED is not set
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+@@ -73,38 +55,29 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-CONFIG_PROFILING=y
+-CONFIG_TRACEPOINTS=y
+-# CONFIG_MARKERS is not set
+-CONFIG_OPROFILE=m
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+ #
+ # IO Schedulers
+@@ -118,7 +91,6 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+-# CONFIG_FREEZER is not set
+ #
+ # Processor type and features
+@@ -142,19 +114,17 @@
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+ # CONFIG_DISCONTIGMEM_MANUAL is not set
+ # CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ # CONFIG_HPUX is not set
+ #
+@@ -168,6 +138,10 @@
+ # CONFIG_EISA is not set
+ # CONFIG_PCI is not set
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
+ # CONFIG_PCCARD is not set
+ #
+@@ -182,15 +156,16 @@
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ CONFIG_BINFMT_MISC=m
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -198,7 +173,6 @@
+ CONFIG_XFRM_USER=m
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+ CONFIG_NET_KEY=m
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -229,25 +203,25 @@
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
+-CONFIG_NETFILTER_ADVANCED=y
+ #
+ # Core Netfilter Configuration
+ #
+-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+-# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NETFILTER_NETLINK is not set
++# CONFIG_NF_CONNTRACK_ENABLED is not set
+ # CONFIG_NF_CONNTRACK is not set
+ # CONFIG_NETFILTER_XTABLES is not set
+-# CONFIG_IP_VS is not set
+ #
+ # IP: Netfilter Configuration
+ #
+-# CONFIG_NF_DEFRAG_IPV4 is not set
+ CONFIG_IP_NF_QUEUE=m
+ # CONFIG_IP_NF_IPTABLES is not set
+ # CONFIG_IP_NF_ARPTABLES is not set
+@@ -256,7 +230,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ CONFIG_LLC=m
+@@ -267,26 +240,28 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+ #
+ CONFIG_NET_PKTGEN=m
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+-# CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -301,8 +276,6 @@
+ # CONFIG_STANDALONE is not set
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -325,19 +298,11 @@
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=6144
+-# CONFIG_BLK_DEV_XIP is not set
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ CONFIG_ATA_OVER_ETH=m
+-# CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+ # CONFIG_EEPROM_93CX6 is not set
+-CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+ #
+@@ -377,17 +342,14 @@
+ # CONFIG_SCSI_FC_ATTRS is not set
+ CONFIG_SCSI_ISCSI_ATTRS=m
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_LIBFC is not set
+ # CONFIG_SCSI_PPA is not set
+ # CONFIG_SCSI_IMM is not set
+ CONFIG_SCSI_LASI700=y
+ CONFIG_53C700_LE_ON_BE=y
+ # CONFIG_SCSI_ZALON is not set
+ CONFIG_SCSI_DEBUG=m
+-# CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+ CONFIG_MD=y
+ CONFIG_BLK_DEV_MD=m
+@@ -400,6 +362,7 @@
+ # CONFIG_MD_FAULTY is not set
+ # CONFIG_BLK_DEV_DM is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=m
+ CONFIG_BONDING=m
+ # CONFIG_MACVLAN is not set
+@@ -414,9 +377,6 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ # CONFIG_B44 is not set
+ # CONFIG_NET_POCKET is not set
+ CONFIG_NETDEV_1000=y
+@@ -427,11 +387,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_PLIP is not set
+ CONFIG_PPP=m
+@@ -446,6 +401,7 @@
+ # CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -467,6 +423,7 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+@@ -489,8 +446,8 @@
+ CONFIG_MOUSE_PS2_ALPS=y
+ CONFIG_MOUSE_PS2_LOGIPS2PP=y
+ CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_LIFEBOOK=y
+ CONFIG_MOUSE_PS2_TRACKPOINT=y
+-# CONFIG_MOUSE_PS2_ELANTECH is not set
+ # CONFIG_MOUSE_PS2_TOUCHKIT is not set
+ CONFIG_MOUSE_SERIAL=m
+ # CONFIG_MOUSE_VSXXXAA is not set
+@@ -517,11 +474,9 @@
+ # Character devices
+ #
+ CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+@@ -546,76 +501,72 @@
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=64
+ CONFIG_PRINTER=m
+ # CONFIG_LP_CONSOLE is not set
+ CONFIG_PPDEV=m
++# CONFIG_TIPAR is not set
+ # CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
++CONFIG_GEN_RTC=y
++CONFIG_GEN_RTC_X=y
+ # CONFIG_R3964 is not set
+ CONFIG_RAW_DRIVER=y
+ CONFIG_MAX_RAW_DEVS=256
+ # CONFIG_TCG_TPM is not set
+ # CONFIG_I2C is not set
++
++#
++# SPI support
++#
+ # CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+ #
+-
+-#
+-# Multimedia core support
+-#
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
++# CONFIG_DAB is not set
+ #
+-# Multimedia drivers
++# Graphics support
+ #
+-# CONFIG_DAB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+-# Graphics support
++# Display device support
+ #
++# CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+ CONFIG_VIDEO_OUTPUT_CONTROL=m
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
+-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+ # CONFIG_FB_SYS_FILLRECT is not set
+ # CONFIG_FB_SYS_COPYAREA is not set
+ # CONFIG_FB_SYS_IMAGEBLIT is not set
+-# CONFIG_FB_FOREIGN_ENDIAN is not set
+ # CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+@@ -628,14 +579,6 @@
+ CONFIG_FB_STI=y
+ # CONFIG_FB_S1D13XXX is not set
+ # CONFIG_FB_VIRTUAL is not set
+-# CONFIG_FB_METRONOME is not set
+-# CONFIG_FB_MB862XX is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+ #
+ # Console display driver support
+@@ -663,8 +606,15 @@
+ # CONFIG_LOGO_LINUX_VGA16 is not set
+ # CONFIG_LOGO_LINUX_CLUT224 is not set
+ CONFIG_LOGO_PARISC_CLUT224=y
++
++#
++# Sound
++#
+ CONFIG_SOUND=y
+-CONFIG_SOUND_OSS_CORE=y
++
++#
++# Advanced Linux Sound Architecture
++#
+ CONFIG_SND=y
+ CONFIG_SND_TIMER=y
+ CONFIG_SND_PCM=y
+@@ -680,7 +630,10 @@
+ CONFIG_SND_VERBOSE_PROCFS=y
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+-CONFIG_SND_DRIVERS=y
++
++#
++# Generic devices
++#
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_VIRMIDI is not set
+ # CONFIG_SND_MTPAV is not set
+@@ -688,82 +641,63 @@
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+ # CONFIG_SND_PORTMAN2X4 is not set
+-CONFIG_SND_GSC=y
++
++#
++# GSC devices
++#
+ CONFIG_SND_HARMONY=y
++
++#
++# System on Chip audio support
++#
+ # CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
+ # CONFIG_SOUND_PRIME is not set
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ CONFIG_HID_DEBUG=y
+-# CONFIG_HIDRAW is not set
+-# CONFIG_HID_PID is not set
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+ CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+ #
+-# Enable Host or Gadget support to see Inventra options
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# USB Gadget Support
+ #
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++# CONFIG_RTC_CLASS is not set
+ #
+-# RTC interfaces
++# DMA Engine support
+ #
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_DMA_ENGINE is not set
+ #
+-# SPI RTC drivers
++# DMA Clients
+ #
+ #
+-# Platform RTC drivers
++# DMA Devices
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
++# CONFIG_AUXDISPLAY is not set
+ #
+-# on-CPU RTC drivers
++# Userspace I/O
+ #
+-CONFIG_RTC_DRV_PARISC=y
+-# CONFIG_DMADEVICES is not set
+-# CONFIG_AUXDISPLAY is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -773,7 +707,7 @@
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4_FS is not set
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+@@ -783,18 +717,19 @@
+ # CONFIG_JFS_DEBUG is not set
+ # CONFIG_JFS_STATISTICS is not set
+ CONFIG_FS_POSIX_ACL=y
+-CONFIG_FILE_LOCKING=y
+ CONFIG_XFS_FS=m
+ # CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_SECURITY is not set
+ # CONFIG_XFS_POSIX_ACL is not set
+ # CONFIG_XFS_RT is not set
+-# CONFIG_XFS_DEBUG is not set
++# CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+-CONFIG_DNOTIFY=y
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
+ # CONFIG_FUSE_FS is not set
+@@ -824,13 +759,16 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_ECRYPT_FS is not set
+@@ -840,34 +778,35 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ CONFIG_UFS_FS=m
+ # CONFIG_UFS_FS_WRITE is not set
+ # CONFIG_UFS_DEBUG is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Network File Systems
++#
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ CONFIG_NFS_V4=y
+-CONFIG_ROOT_NFS=y
++CONFIG_NFS_DIRECTIO=y
+ CONFIG_NFSD=m
+ CONFIG_NFSD_V3=y
+ # CONFIG_NFSD_V3_ACL is not set
+ CONFIG_NFSD_V4=y
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
++# CONFIG_SUNRPC_BIND34 is not set
+ CONFIG_RPCSEC_GSS_KRB5=y
+ CONFIG_RPCSEC_GSS_SPKM3=m
+ CONFIG_SMB_FS=m
+@@ -876,7 +815,6 @@
+ CONFIG_CIFS=m
+ # CONFIG_CIFS_STATS is not set
+ # CONFIG_CIFS_WEAK_PW_HASH is not set
+-# CONFIG_CIFS_UPCALL is not set
+ # CONFIG_CIFS_XATTR is not set
+ # CONFIG_CIFS_DEBUG2 is not set
+ # CONFIG_CIFS_EXPERIMENTAL is not set
+@@ -889,6 +827,10 @@
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -929,28 +871,33 @@
+ CONFIG_NLS_KOI8_R=m
+ CONFIG_NLS_KOI8_U=m
+ CONFIG_NLS_UTF8=m
++
++#
++# Distributed Lock Manager
++#
+ # CONFIG_DLM is not set
+ #
++# Profiling support
++#
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
++# CONFIG_DEBUG_FS is not set
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+@@ -962,32 +909,10 @@
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-CONFIG_DEBUG_MEMORY_INIT=y
+ # CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
++CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-CONFIG_NOP_TRACER=y
+-CONFIG_RING_BUFFER=y
+-CONFIG_TRACING=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_FTRACE_STARTUP_TEST is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_RODATA=y
+ #
+@@ -996,113 +921,57 @@
+ CONFIG_KEYS=y
+ CONFIG_KEYS_DEBUG_PROC_KEYS=y
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD=m
+-CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_NULL=m
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_AUTHENC=m
+-CONFIG_CRYPTO_TEST=m
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=y
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-CONFIG_CRYPTO_ECB=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+ CONFIG_CRYPTO_HMAC=y
+ # CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_NULL=m
+ CONFIG_CRYPTO_MD4=m
+ CONFIG_CRYPTO_MD5=y
+-CONFIG_CRYPTO_MICHAEL_MIC=m
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+ CONFIG_CRYPTO_SHA1=m
+ CONFIG_CRYPTO_SHA256=m
+ CONFIG_CRYPTO_SHA512=m
+-CONFIG_CRYPTO_TGR192=m
+ CONFIG_CRYPTO_WP512=m
+-
+-#
+-# Ciphers
+-#
+-CONFIG_CRYPTO_AES=m
+-CONFIG_CRYPTO_ANUBIS=m
+-CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_TGR192=m
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
+ CONFIG_CRYPTO_BLOWFISH=m
+-# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
+ CONFIG_CRYPTO_CAST5=m
+ CONFIG_CRYPTO_CAST6=m
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_ARC4=m
+ CONFIG_CRYPTO_KHAZAD=m
+-# CONFIG_CRYPTO_SALSA20 is not set
++CONFIG_CRYPTO_ANUBIS=m
+ # CONFIG_CRYPTO_SEED is not set
+-CONFIG_CRYPTO_SERPENT=m
+-CONFIG_CRYPTO_TEA=m
+-CONFIG_CRYPTO_TWOFISH=m
+-CONFIG_CRYPTO_TWOFISH_COMMON=m
+-
+-#
+-# Compression
+-#
+ CONFIG_CRYPTO_DEFLATE=m
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
+ # CONFIG_CRYPTO_HW is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+-CONFIG_CRC_ITU_T=m
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+ CONFIG_LIBCRC32C=m
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/configs/a500_defconfig linux-2.6.29-rc3.owrt/arch/parisc/configs/a500_defconfig
+--- linux-2.6.29.owrt/arch/parisc/configs/a500_defconfig       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/configs/a500_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 01:32:56 2009
++# Linux kernel version: 2.6.23
++# Fri Oct 12 21:12:44 2007
+ #
+ CONFIG_PARISC=y
+ CONFIG_MMU=y
+@@ -34,30 +34,18 @@
+ CONFIG_POSIX_MQUEUE=y
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=16
+-# CONFIG_GROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
++# CONFIG_CPUSETS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+ CONFIG_EMBEDDED=y
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+@@ -69,40 +57,28 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+-CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-CONFIG_PROFILING=y
+-CONFIG_TRACEPOINTS=y
+-# CONFIG_MARKERS is not set
+-CONFIG_OPROFILE=m
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_USE_GENERIC_SMP_HELPERS=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++CONFIG_KMOD=y
+ CONFIG_STOP_MACHINE=y
+ CONFIG_BLOCK=y
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+ CONFIG_BLOCK_COMPAT=y
+ #
+@@ -117,7 +93,6 @@
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
+-# CONFIG_FREEZER is not set
+ #
+ # Processor type and features
+@@ -143,12 +118,12 @@
+ CONFIG_PREEMPT_NONE=y
+ # CONFIG_PREEMPT_VOLUNTARY is not set
+ # CONFIG_PREEMPT is not set
++CONFIG_PREEMPT_BKL=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ # CONFIG_FLATMEM_MANUAL is not set
+ CONFIG_DISCONTIGMEM_MANUAL=y
+@@ -156,12 +131,11 @@
+ CONFIG_DISCONTIGMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ CONFIG_NEED_MULTIPLE_NODES=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_PHYS_ADDR_T_64BIT=y
++CONFIG_RESOURCES_64BIT=y
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ CONFIG_COMPAT=y
+ CONFIG_NR_CPUS=8
+@@ -171,13 +145,14 @@
+ # CONFIG_GSC is not set
+ CONFIG_PCI=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+-CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ CONFIG_PCI_LBA=y
+ CONFIG_IOSAPIC=y
+ CONFIG_IOMMU_SBA=y
+-CONFIG_IOMMU_HELPER=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
+ CONFIG_PCCARD=m
+ # CONFIG_PCMCIA_DEBUG is not set
+ CONFIG_PCMCIA=m
+@@ -212,15 +187,16 @@
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -228,8 +204,6 @@
+ CONFIG_XFRM_USER=m
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-CONFIG_XFRM_IPCOMP=m
+ CONFIG_NET_KEY=m
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -260,6 +234,7 @@
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
+ CONFIG_IPV6=m
+ # CONFIG_IPV6_PRIVACY is not set
+ # CONFIG_IPV6_ROUTER_PREF is not set
+@@ -275,72 +250,66 @@
+ CONFIG_INET6_XFRM_MODE_BEET=m
+ # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+ CONFIG_IPV6_SIT=m
+-CONFIG_IPV6_NDISC_NODETYPE=y
+ CONFIG_IPV6_TUNNEL=m
+ # CONFIG_IPV6_MULTIPLE_TABLES is not set
+-# CONFIG_IPV6_MROUTE is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
+-CONFIG_NETFILTER_ADVANCED=y
+ #
+ # Core Netfilter Configuration
+ #
+-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+-# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NETFILTER_NETLINK is not set
++# CONFIG_NF_CONNTRACK_ENABLED is not set
+ # CONFIG_NF_CONNTRACK is not set
+ CONFIG_NETFILTER_XTABLES=m
+ # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+ # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+ # CONFIG_NETFILTER_XT_TARGET_MARK is not set
+-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+ # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
++# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+ # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+ # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+ # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+ # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+ # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+ # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+ # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+ # CONFIG_NETFILTER_XT_MATCH_MAC is not set
+ # CONFIG_NETFILTER_XT_MATCH_MARK is not set
+-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+ # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
++# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+ # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+ # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+ # CONFIG_NETFILTER_XT_MATCH_REALM is not set
+-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+ # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+ # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+ # CONFIG_NETFILTER_XT_MATCH_STRING is not set
+ # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+ # CONFIG_NETFILTER_XT_MATCH_TIME is not set
+ # CONFIG_NETFILTER_XT_MATCH_U32 is not set
+-# CONFIG_IP_VS is not set
++# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+ #
+ # IP: Netfilter Configuration
+ #
+-# CONFIG_NF_DEFRAG_IPV4 is not set
+ CONFIG_IP_NF_QUEUE=m
+ CONFIG_IP_NF_IPTABLES=m
+-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+-# CONFIG_IP_NF_MATCH_AH is not set
++CONFIG_IP_NF_MATCH_IPRANGE=m
++CONFIG_IP_NF_MATCH_TOS=m
++CONFIG_IP_NF_MATCH_RECENT=m
+ CONFIG_IP_NF_MATCH_ECN=m
++# CONFIG_IP_NF_MATCH_AH is not set
+ CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_MATCH_OWNER=m
++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+ CONFIG_IP_NF_FILTER=m
+ CONFIG_IP_NF_TARGET_REJECT=m
+ CONFIG_IP_NF_TARGET_LOG=m
+ CONFIG_IP_NF_TARGET_ULOG=m
+ CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_TOS=m
+ CONFIG_IP_NF_TARGET_ECN=m
+ # CONFIG_IP_NF_TARGET_TTL is not set
+ CONFIG_IP_NF_RAW=m
+@@ -349,30 +318,33 @@
+ CONFIG_IP_NF_ARP_MANGLE=m
+ #
+-# IPv6: Netfilter Configuration
++# IPv6: Netfilter Configuration (EXPERIMENTAL)
+ #
+ # CONFIG_IP6_NF_QUEUE is not set
+ CONFIG_IP6_NF_IPTABLES=m
+-# CONFIG_IP6_NF_MATCH_AH is not set
+-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+-CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_RT=m
+ CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_FRAG=m
+ CONFIG_IP6_NF_MATCH_HL=m
++# CONFIG_IP6_NF_MATCH_OWNER is not set
+ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++# CONFIG_IP6_NF_MATCH_AH is not set
+ # CONFIG_IP6_NF_MATCH_MH is not set
+-CONFIG_IP6_NF_MATCH_RT=m
+-CONFIG_IP6_NF_TARGET_LOG=m
++# CONFIG_IP6_NF_MATCH_EUI64 is not set
+ CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
+ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ # CONFIG_IP6_NF_TARGET_HL is not set
+ CONFIG_IP6_NF_RAW=m
+ CONFIG_IP_DCCP=m
+ CONFIG_INET_DCCP_DIAG=m
++CONFIG_IP_DCCP_ACKVEC=y
+ #
+ # DCCP CCIDs Configuration (EXPERIMENTAL)
+ #
++CONFIG_IP_DCCP_CCID2=m
+ # CONFIG_IP_DCCP_CCID2_DEBUG is not set
+ # CONFIG_IP_DCCP_CCID3 is not set
+@@ -384,7 +356,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ CONFIG_LLC=m
+@@ -395,26 +366,28 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+ #
+ CONFIG_NET_PKTGEN=m
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+-# CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -429,8 +402,6 @@
+ # CONFIG_STANDALONE is not set
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -450,23 +421,14 @@
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=6144
+-# CONFIG_BLK_DEV_XIP is not set
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_HP_ILO is not set
+-# CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_93CX6 is not set
+-CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+ #
+@@ -506,10 +468,8 @@
+ CONFIG_SCSI_FC_ATTRS=m
+ CONFIG_SCSI_ISCSI_ATTRS=m
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+ # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+ # CONFIG_SCSI_3W_9XXX is not set
+ # CONFIG_SCSI_ACARD is not set
+@@ -518,21 +478,16 @@
+ # CONFIG_SCSI_AIC7XXX_OLD is not set
+ # CONFIG_SCSI_AIC79XX is not set
+ # CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+ # CONFIG_SCSI_ARCMSR is not set
+ # CONFIG_MEGARAID_NEWGEN is not set
+ # CONFIG_MEGARAID_LEGACY is not set
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+ # CONFIG_SCSI_IPS is not set
+ # CONFIG_SCSI_INITIO is not set
+ # CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+ # CONFIG_SCSI_STEX is not set
+ CONFIG_SCSI_SYM53C8XX_2=y
+ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+@@ -548,11 +503,9 @@
+ CONFIG_SCSI_DEBUG=m
+ # CONFIG_SCSI_SRP is not set
+ # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+-# CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+ CONFIG_MD=y
+ CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_AUTODETECT=y
+ CONFIG_MD_LINEAR=y
+ CONFIG_MD_RAID0=y
+ CONFIG_MD_RAID1=y
+@@ -561,6 +514,10 @@
+ # CONFIG_MD_MULTIPATH is not set
+ # CONFIG_MD_FAULTY is not set
+ # CONFIG_BLK_DEV_DM is not set
++
++#
++# Fusion MPT device support
++#
+ CONFIG_FUSION=y
+ CONFIG_FUSION_SPI=m
+ CONFIG_FUSION_FC=m
+@@ -572,40 +529,20 @@
+ #
+ # IEEE 1394 (FireWire) support
+ #
+-
+-#
+-# Enable only one of the two stacks, unless you know what you are doing
+-#
+ # CONFIG_FIREWIRE is not set
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=m
+ CONFIG_BONDING=m
+ # CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+ # CONFIG_VETH is not set
++# CONFIG_IP1000 is not set
+ # CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=m
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
++# CONFIG_PHYLIB is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=m
+ # CONFIG_HAPPYMEAL is not set
+@@ -630,38 +567,33 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ CONFIG_NET_PCI=y
+ CONFIG_PCNET32=m
++# CONFIG_PCNET32_NAPI is not set
+ # CONFIG_AMD8111_ETH is not set
+ # CONFIG_ADAPTEC_STARFIRE is not set
+ # CONFIG_B44 is not set
+ # CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
+ CONFIG_E100=m
+ # CONFIG_FEALNX is not set
+ # CONFIG_NATSEMI is not set
+ # CONFIG_NE2K_PCI is not set
+ # CONFIG_8139CP is not set
+ # CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+ # CONFIG_SIS900 is not set
+ # CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+ # CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+ # CONFIG_VIA_RHINE is not set
+ # CONFIG_SC92031 is not set
+-# CONFIG_ATL2 is not set
+ CONFIG_NETDEV_1000=y
+ CONFIG_ACENIC=m
+ CONFIG_ACENIC_OMIT_TIGON_I=y
+ # CONFIG_DL2K is not set
+ CONFIG_E1000=m
++CONFIG_E1000_NAPI=y
++# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+ # CONFIG_E1000E is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+ # CONFIG_NS83820 is not set
+ # CONFIG_HAMACHI is not set
+ # CONFIG_YELLOWFIN is not set
+@@ -669,31 +601,23 @@
+ # CONFIG_SIS190 is not set
+ # CONFIG_SKGE is not set
+ # CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
+ # CONFIG_VIA_VELOCITY is not set
+ CONFIG_TIGON3=m
+ # CONFIG_BNX2 is not set
+ # CONFIG_QLA3XXX is not set
+ # CONFIG_ATL1 is not set
+-# CONFIG_ATL1E is not set
+-# CONFIG_ATL1C is not set
+-# CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+ # CONFIG_CHELSIO_T3 is not set
+-# CONFIG_ENIC is not set
+ # CONFIG_IXGBE is not set
+ # CONFIG_IXGB is not set
+ # CONFIG_S2IO is not set
+ # CONFIG_MYRI10GE is not set
+ # CONFIG_NETXEN_NIC is not set
+ # CONFIG_NIU is not set
+-# CONFIG_MLX4_EN is not set
+ # CONFIG_MLX4_CORE is not set
+ # CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_QLGE is not set
+-# CONFIG_SFC is not set
+ # CONFIG_TR is not set
+ #
+@@ -701,11 +625,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ CONFIG_NET_PCMCIA=y
+ CONFIG_PCMCIA_3C589=m
+ CONFIG_PCMCIA_3C574=m
+@@ -731,6 +650,7 @@
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -749,6 +669,7 @@
+ #
+ # CONFIG_INPUT_MOUSEDEV is not set
+ # CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+@@ -772,13 +693,10 @@
+ # Character devices
+ #
+ CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+ #
+ # Serial drivers
+@@ -803,12 +721,17 @@
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
++CONFIG_GEN_RTC=y
++CONFIG_GEN_RTC_X=y
+ # CONFIG_R3964 is not set
+ # CONFIG_APPLICOM is not set
++CONFIG_AGP=y
++CONFIG_AGP_PARISC=y
++# CONFIG_DRM is not set
+ #
+ # PCMCIA character devices
+@@ -816,66 +739,51 @@
+ # CONFIG_SYNCLINK_CS is not set
+ # CONFIG_CARDMAN_4000 is not set
+ # CONFIG_CARDMAN_4040 is not set
+-# CONFIG_IPWIRELESS is not set
+ CONFIG_RAW_DRIVER=y
+ CONFIG_MAX_RAW_DEVS=256
+ # CONFIG_TCG_TPM is not set
+ CONFIG_DEVPORT=y
+ # CONFIG_I2C is not set
++
++#
++# SPI support
++#
+ # CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+ #
+-
+-#
+-# Multimedia core support
+-#
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
+-
+-#
+-# Multimedia drivers
+-#
+ # CONFIG_DAB is not set
+ #
+ # Graphics support
+ #
+-CONFIG_AGP=y
+-CONFIG_AGP_PARISC=y
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
+ #
+ # Console display driver support
+@@ -884,83 +792,50 @@
+ CONFIG_DUMMY_CONSOLE_COLUMNS=160
+ CONFIG_DUMMY_CONSOLE_ROWS=64
+ # CONFIG_STI_CONSOLE is not set
++
++#
++# Sound
++#
+ # CONFIG_SOUND is not set
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ # CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-# CONFIG_HID_PID is not set
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ CONFIG_USB_ARCH_HAS_EHCI=y
+ # CONFIG_USB is not set
+-# CONFIG_USB_OTG_WHITELIST is not set
+-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+ #
+-# Enable Host or Gadget support to see Inventra options
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# USB Gadget Support
+ #
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+-# CONFIG_UWB is not set
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++# CONFIG_RTC_CLASS is not set
+ #
+-# RTC interfaces
++# DMA Engine support
+ #
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_DMA_ENGINE is not set
+ #
+-# SPI RTC drivers
++# DMA Clients
+ #
+ #
+-# Platform RTC drivers
++# DMA Devices
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+ #
+-# on-CPU RTC drivers
++# Userspace I/O
+ #
+-CONFIG_RTC_DRV_PARISC=y
+-# CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -970,7 +845,7 @@
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4_FS is not set
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+@@ -980,19 +855,19 @@
+ # CONFIG_JFS_DEBUG is not set
+ # CONFIG_JFS_STATISTICS is not set
+ CONFIG_FS_POSIX_ACL=y
+-CONFIG_FILE_LOCKING=y
+ CONFIG_XFS_FS=m
+ # CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_SECURITY is not set
+ # CONFIG_XFS_POSIX_ACL is not set
+ # CONFIG_XFS_RT is not set
+-# CONFIG_XFS_DEBUG is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+-CONFIG_DNOTIFY=y
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
+ # CONFIG_FUSE_FS is not set
+@@ -1022,13 +897,16 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_ECRYPT_FS is not set
+@@ -1038,33 +916,34 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ CONFIG_UFS_FS=m
+ # CONFIG_UFS_FS_WRITE is not set
+ # CONFIG_UFS_DEBUG is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Network File Systems
++#
+ CONFIG_NFS_FS=m
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ CONFIG_NFS_V4=y
++CONFIG_NFS_DIRECTIO=y
+ CONFIG_NFSD=m
+ CONFIG_NFSD_V3=y
+ # CONFIG_NFSD_V3_ACL is not set
+ CONFIG_NFSD_V4=y
++CONFIG_NFSD_TCP=y
+ CONFIG_LOCKD=m
+ CONFIG_LOCKD_V4=y
+ CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=m
+ CONFIG_SUNRPC_GSS=m
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
++# CONFIG_SUNRPC_BIND34 is not set
+ CONFIG_RPCSEC_GSS_KRB5=m
+ CONFIG_RPCSEC_GSS_SPKM3=m
+ CONFIG_SMB_FS=m
+@@ -1073,7 +952,6 @@
+ CONFIG_CIFS=m
+ # CONFIG_CIFS_STATS is not set
+ # CONFIG_CIFS_WEAK_PW_HASH is not set
+-# CONFIG_CIFS_UPCALL is not set
+ # CONFIG_CIFS_XATTR is not set
+ # CONFIG_CIFS_DEBUG2 is not set
+ # CONFIG_CIFS_EXPERIMENTAL is not set
+@@ -1086,6 +964,10 @@
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -1126,28 +1008,33 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
++
++#
++# Distributed Lock Manager
++#
+ # CONFIG_DLM is not set
+ #
++# Profiling support
++#
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=2048
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
++# CONFIG_DEBUG_FS is not set
+ CONFIG_HEADERS_CHECK=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+@@ -1159,33 +1046,10 @@
+ # CONFIG_DEBUG_BUGVERBOSE is not set
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-# CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
++CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-CONFIG_NOP_TRACER=y
+-CONFIG_RING_BUFFER=y
+-CONFIG_TRACING=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_FTRACE_STARTUP_TEST is not set
+-# CONFIG_BUILD_DOCSRC is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+ # CONFIG_DEBUG_RODATA is not set
+ #
+@@ -1194,112 +1058,56 @@
+ CONFIG_KEYS=y
+ CONFIG_KEYS_DEBUG_PROC_KEYS=y
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD=m
+-CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=m
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_NULL=m
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_AUTHENC=m
+-CONFIG_CRYPTO_TEST=m
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=m
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+ CONFIG_CRYPTO_HMAC=y
+ # CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_NULL=m
+ # CONFIG_CRYPTO_MD4 is not set
+ CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+ CONFIG_CRYPTO_SHA1=m
+ # CONFIG_CRYPTO_SHA256 is not set
+ # CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+ # CONFIG_CRYPTO_WP512 is not set
+-
+-#
+-# Ciphers
+-#
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
+ CONFIG_CRYPTO_BLOWFISH=m
+-# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
+ CONFIG_CRYPTO_CAST5=m
+ # CONFIG_CRYPTO_CAST6 is not set
+-CONFIG_CRYPTO_DES=m
+-# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
+ # CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-
+-#
+-# Compression
+-#
+ CONFIG_CRYPTO_DEFLATE=m
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
+ # CONFIG_CRYPTO_HW is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+-CONFIG_CRC_ITU_T=m
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+ CONFIG_LIBCRC32C=m
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/configs/b180_defconfig linux-2.6.29-rc3.owrt/arch/parisc/configs/b180_defconfig
+--- linux-2.6.29.owrt/arch/parisc/configs/b180_defconfig       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/configs/b180_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 01:32:57 2009
++# Linux kernel version: 2.6.23
++# Fri Oct 12 21:16:46 2007
+ #
+ CONFIG_PARISC=y
+ CONFIG_MMU=y
+@@ -33,29 +33,13 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=16
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+-CONFIG_NAMESPACES=y
+-# CONFIG_UTS_NS is not set
+-# CONFIG_IPC_NS is not set
+ # CONFIG_BLK_DEV_INITRD is not set
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+ # CONFIG_EMBEDDED is not set
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+@@ -67,34 +51,27 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+-CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ # CONFIG_MODULE_UNLOAD is not set
+ CONFIG_MODVERSIONS=y
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++# CONFIG_KMOD is not set
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
++# CONFIG_LSF is not set
+ #
+ # IO Schedulers
+@@ -108,7 +85,6 @@
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
+-# CONFIG_FREEZER is not set
+ #
+ # Processor type and features
+@@ -132,15 +108,13 @@
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ # CONFIG_HPUX is not set
+ #
+@@ -156,14 +130,14 @@
+ CONFIG_ISA=y
+ CONFIG_PCI=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+-CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ CONFIG_GSC_DINO=y
+ # CONFIG_PCI_LBA is not set
+-CONFIG_IOMMU_HELPER=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
+ # CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+ #
+ # PA-RISC specific drivers
+@@ -177,15 +151,16 @@
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -230,37 +205,36 @@
+ CONFIG_INET6_XFRM_MODE_TUNNEL=y
+ CONFIG_INET6_XFRM_MODE_BEET=y
+ CONFIG_IPV6_SIT=y
+-CONFIG_IPV6_NDISC_NODETYPE=y
+ # CONFIG_IPV6_TUNNEL is not set
+ # CONFIG_NETLABEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+-# CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
++
++#
++# QoS and/or fair queueing
++#
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+-# CONFIG_LIB80211 is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ #
+@@ -273,9 +247,7 @@
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+-CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -303,18 +275,10 @@
+ CONFIG_CDROM_PKTCDVD=m
+ CONFIG_CDROM_PKTCDVD_BUFFERS=8
+ CONFIG_ATA_OVER_ETH=y
+-# CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_HP_ILO is not set
+-
+-#
+-# EEPROM support
+-#
+ # CONFIG_EEPROM_93CX6 is not set
+-CONFIG_HAVE_IDE=y
++# CONFIG_SGI_IOC4 is not set
+ # CONFIG_IDE is not set
+ #
+@@ -353,10 +317,8 @@
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+ # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+ # CONFIG_SCSI_3W_9XXX is not set
+ # CONFIG_SCSI_ACARD is not set
+@@ -368,15 +330,12 @@
+ # CONFIG_SCSI_AIC79XX is not set
+ # CONFIG_SCSI_AIC94XX is not set
+ # CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+ # CONFIG_SCSI_IN2000 is not set
+ # CONFIG_SCSI_ARCMSR is not set
+ # CONFIG_MEGARAID_NEWGEN is not set
+ # CONFIG_MEGARAID_LEGACY is not set
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_DTC3280 is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+@@ -387,7 +346,6 @@
+ # CONFIG_SCSI_INIA100 is not set
+ # CONFIG_SCSI_PPA is not set
+ # CONFIG_SCSI_IMM is not set
+-# CONFIG_SCSI_MVSAS is not set
+ # CONFIG_SCSI_NCR53C406A is not set
+ CONFIG_SCSI_LASI700=y
+ CONFIG_53C700_LE_ON_BE=y
+@@ -402,6 +360,7 @@
+ CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
+ CONFIG_SCSI_NCR53C8XX_SYNC=40
+ # CONFIG_SCSI_PAS16 is not set
++# CONFIG_SCSI_PSI240I is not set
+ # CONFIG_SCSI_QLOGIC_FAS is not set
+ # CONFIG_SCSI_QLOGIC_1280 is not set
+ # CONFIG_SCSI_QLA_FC is not set
+@@ -414,11 +373,9 @@
+ # CONFIG_SCSI_NSP32 is not set
+ # CONFIG_SCSI_DEBUG is not set
+ # CONFIG_SCSI_SRP is not set
+-# CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+ CONFIG_MD=y
+ CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_AUTODETECT=y
+ CONFIG_MD_LINEAR=y
+ CONFIG_MD_RAID0=y
+ CONFIG_MD_RAID1=y
+@@ -426,18 +383,26 @@
+ # CONFIG_MD_MULTIPATH is not set
+ # CONFIG_MD_FAULTY is not set
+ # CONFIG_BLK_DEV_DM is not set
++
++#
++# Fusion MPT device support
++#
+ # CONFIG_FUSION is not set
++# CONFIG_FUSION_SPI is not set
++# CONFIG_FUSION_FC is not set
++# CONFIG_FUSION_SAS is not set
+ #
+ # IEEE 1394 (FireWire) support
+ #
+ #
+-# A new alternative FireWire stack is available with EXPERIMENTAL=y
++# An alternative FireWire stack is available with EXPERIMENTAL=y
+ #
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+@@ -469,49 +434,36 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ # CONFIG_NET_PCI is not set
+ # CONFIG_B44 is not set
+-# CONFIG_CS89x0 is not set
+ # CONFIG_NET_POCKET is not set
+-# CONFIG_ATL2 is not set
+ CONFIG_NETDEV_1000=y
+ # CONFIG_ACENIC is not set
+ # CONFIG_DL2K is not set
+ # CONFIG_E1000 is not set
+ # CONFIG_E1000E is not set
+-# CONFIG_IGB is not set
+ # CONFIG_NS83820 is not set
+ # CONFIG_HAMACHI is not set
+ # CONFIG_R8169 is not set
+ # CONFIG_SIS190 is not set
+ # CONFIG_SKGE is not set
+ # CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
+ # CONFIG_VIA_VELOCITY is not set
+ # CONFIG_TIGON3 is not set
+ # CONFIG_BNX2 is not set
+ # CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-# CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+ # CONFIG_CHELSIO_T3 is not set
+-# CONFIG_ENIC is not set
+ # CONFIG_IXGBE is not set
+ # CONFIG_IXGB is not set
+ # CONFIG_S2IO is not set
+ # CONFIG_MYRI10GE is not set
+ # CONFIG_NETXEN_NIC is not set
+ # CONFIG_NIU is not set
+-# CONFIG_MLX4_EN is not set
+ # CONFIG_MLX4_CORE is not set
+ # CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_QLGE is not set
+-# CONFIG_SFC is not set
+ # CONFIG_TR is not set
+ #
+@@ -519,11 +471,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_FDDI is not set
+ # CONFIG_PLIP is not set
+@@ -556,6 +503,7 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
+ CONFIG_INPUT_EVDEV=y
+ # CONFIG_INPUT_EVBUG is not set
+@@ -578,12 +526,11 @@
+ CONFIG_MOUSE_PS2_ALPS=y
+ CONFIG_MOUSE_PS2_LOGIPS2PP=y
+ CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_LIFEBOOK=y
+ CONFIG_MOUSE_PS2_TRACKPOINT=y
+-# CONFIG_MOUSE_PS2_ELANTECH is not set
+ # CONFIG_MOUSE_PS2_TOUCHKIT is not set
+ # CONFIG_MOUSE_SERIAL is not set
+ # CONFIG_MOUSE_APPLETOUCH is not set
+-# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_INPORT is not set
+ # CONFIG_MOUSE_LOGIBM is not set
+ # CONFIG_MOUSE_PC110PAD is not set
+@@ -617,11 +564,9 @@
+ # Character devices
+ #
+ CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ #
+@@ -653,79 +598,75 @@
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+ CONFIG_PRINTER=y
+ # CONFIG_LP_CONSOLE is not set
+ # CONFIG_PPDEV is not set
++# CONFIG_TIPAR is not set
+ # CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_APPLICOM is not set
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
+ # CONFIG_RAW_DRIVER is not set
+ CONFIG_DEVPORT=y
+ # CONFIG_I2C is not set
++
++#
++# SPI support
++#
+ # CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+ #
+-
+-#
+-# Multimedia core support
+-#
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
++# CONFIG_DAB is not set
+ #
+-# Multimedia drivers
++# Graphics support
+ #
+-# CONFIG_DAB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+-# Graphics support
++# Display device support
+ #
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
++# CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+ CONFIG_VIDEO_OUTPUT_CONTROL=m
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
+-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+ # CONFIG_FB_SYS_FILLRECT is not set
+ # CONFIG_FB_SYS_COPYAREA is not set
+ # CONFIG_FB_SYS_IMAGEBLIT is not set
+-# CONFIG_FB_FOREIGN_ENDIAN is not set
+ # CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+@@ -750,7 +691,6 @@
+ # CONFIG_FB_ATY is not set
+ # CONFIG_FB_S3 is not set
+ # CONFIG_FB_SIS is not set
+-# CONFIG_FB_VIA is not set
+ # CONFIG_FB_NEOMAGIC is not set
+ # CONFIG_FB_KYRO is not set
+ # CONFIG_FB_3DFX is not set
+@@ -758,16 +698,7 @@
+ # CONFIG_FB_VT8623 is not set
+ # CONFIG_FB_TRIDENT is not set
+ # CONFIG_FB_ARK is not set
+-# CONFIG_FB_CARMINE is not set
+ # CONFIG_FB_VIRTUAL is not set
+-# CONFIG_FB_METRONOME is not set
+-# CONFIG_FB_MB862XX is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+ #
+ # Console display driver support
+@@ -787,8 +718,15 @@
+ CONFIG_LOGO_LINUX_VGA16=y
+ CONFIG_LOGO_LINUX_CLUT224=y
+ CONFIG_LOGO_PARISC_CLUT224=y
++
++#
++# Sound
++#
+ CONFIG_SOUND=y
+-CONFIG_SOUND_OSS_CORE=y
++
++#
++# Advanced Linux Sound Architecture
++#
+ CONFIG_SND=y
+ CONFIG_SND_TIMER=y
+ CONFIG_SND_PCM=y
+@@ -804,7 +742,10 @@
+ CONFIG_SND_VERBOSE_PROCFS=y
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+-CONFIG_SND_DRIVERS=y
++
++#
++# Generic devices
++#
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_VIRMIDI is not set
+ # CONFIG_SND_MTPAV is not set
+@@ -812,7 +753,10 @@
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+ # CONFIG_SND_PORTMAN2X4 is not set
+-CONFIG_SND_PCI=y
++
++#
++# PCI devices
++#
+ # CONFIG_SND_AD1889 is not set
+ # CONFIG_SND_ALS300 is not set
+ # CONFIG_SND_ALI5451 is not set
+@@ -821,11 +765,9 @@
+ # CONFIG_SND_AU8810 is not set
+ # CONFIG_SND_AU8820 is not set
+ # CONFIG_SND_AU8830 is not set
+-# CONFIG_SND_AW2 is not set
+ # CONFIG_SND_BT87X is not set
+ # CONFIG_SND_CA0106 is not set
+ # CONFIG_SND_CMIPCI is not set
+-# CONFIG_SND_OXYGEN is not set
+ # CONFIG_SND_CS4281 is not set
+ # CONFIG_SND_CS46XX is not set
+ # CONFIG_SND_DARLA20 is not set
+@@ -850,7 +792,6 @@
+ # CONFIG_SND_HDA_INTEL is not set
+ # CONFIG_SND_HDSP is not set
+ # CONFIG_SND_HDSPM is not set
+-# CONFIG_SND_HIFIER is not set
+ # CONFIG_SND_ICE1712 is not set
+ # CONFIG_SND_ICE1724 is not set
+ # CONFIG_SND_INTEL8X0 is not set
+@@ -868,23 +809,30 @@
+ # CONFIG_SND_TRIDENT is not set
+ # CONFIG_SND_VIA82XX is not set
+ # CONFIG_SND_VIA82XX_MODEM is not set
+-# CONFIG_SND_VIRTUOSO is not set
+ # CONFIG_SND_VX222 is not set
+ # CONFIG_SND_YMFPCI is not set
+-CONFIG_SND_GSC=y
++
++#
++# GSC devices
++#
+ CONFIG_SND_HARMONY=y
++
++#
++# System on Chip audio support
++#
+ # CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
+ # CONFIG_SOUND_PRIME is not set
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ CONFIG_HID_DEBUG=y
+-# CONFIG_HIDRAW is not set
+-# CONFIG_HID_PID is not set
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+@@ -892,63 +840,36 @@
+ # CONFIG_USB is not set
+ #
+-# Enable Host or Gadget support to see Inventra options
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# USB Gadget Support
+ #
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++# CONFIG_RTC_CLASS is not set
+ #
+-# RTC interfaces
++# DMA Engine support
+ #
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_DMA_ENGINE is not set
+ #
+-# SPI RTC drivers
++# DMA Clients
+ #
+ #
+-# Platform RTC drivers
++# DMA Devices
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
++# CONFIG_AUXDISPLAY is not set
+ #
+-# on-CPU RTC drivers
++# Userspace I/O
+ #
+-CONFIG_RTC_DRV_PARISC=y
+-# CONFIG_DMADEVICES is not set
+-# CONFIG_AUXDISPLAY is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -958,18 +879,19 @@
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4_FS is not set
+ CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
+ # CONFIG_FUSE_FS is not set
+@@ -995,32 +917,35 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++CONFIG_RAMFS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_HFSPLUS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Network File Systems
++#
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+-CONFIG_ROOT_NFS=y
++# CONFIG_NFS_DIRECTIO is not set
+ CONFIG_NFSD=y
+ CONFIG_NFSD_V3=y
+ # CONFIG_NFSD_V3_ACL is not set
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_EXPORTFS=y
+@@ -1037,6 +962,10 @@
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -1082,9 +1011,7 @@
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+ # CONFIG_DEBUG_FS is not set
+@@ -1092,12 +1019,9 @@
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+@@ -1109,29 +1033,10 @@
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-CONFIG_DEBUG_MEMORY_INIT=y
+ # CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
++CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_BUILD_DOCSRC is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+ # CONFIG_DEBUG_RODATA is not set
+ #
+@@ -1139,108 +1044,52 @@
+ #
+ # CONFIG_KEYS is not set
+ CONFIG_SECURITY=y
+-# CONFIG_SECURITYFS is not set
+ # CONFIG_SECURITY_NETWORK is not set
+-# CONFIG_SECURITY_PATH is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
++CONFIG_SECURITY_CAPABILITIES=y
+ CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=y
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-
+-#
+-# Hash modes
+-#
+ # CONFIG_CRYPTO_HMAC is not set
+-
+-#
+-# Digest
+-#
+-# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_MD4 is not set
+ # CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+ # CONFIG_CRYPTO_SHA1 is not set
+ # CONFIG_CRYPTO_SHA256 is not set
+ # CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+ # CONFIG_CRYPTO_WP512 is not set
+-
+-#
+-# Ciphers
+-#
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
+ # CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
+ # CONFIG_CRYPTO_CAST5 is not set
+ # CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
+ # CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-
+-#
+-# Compression
+-#
+ # CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
+ CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/configs/c3000_defconfig linux-2.6.29-rc3.owrt/arch/parisc/configs/c3000_defconfig
+--- linux-2.6.29.owrt/arch/parisc/configs/c3000_defconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/configs/c3000_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 01:32:58 2009
++# Linux kernel version: 2.6.23
++# Fri Oct 12 21:24:00 2007
+ #
+ CONFIG_PARISC=y
+ CONFIG_MMU=y
+@@ -33,29 +33,16 @@
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=16
+-# CONFIG_GROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+ # CONFIG_BLK_DEV_INITRD is not set
+ # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+ CONFIG_EMBEDDED=y
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+@@ -67,39 +54,29 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+-CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-CONFIG_PROFILING=y
+-CONFIG_TRACEPOINTS=y
+-# CONFIG_MARKERS is not set
+-CONFIG_OPROFILE=m
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+ #
+ # IO Schedulers
+@@ -113,7 +90,6 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+-# CONFIG_FREEZER is not set
+ #
+ # Processor type and features
+@@ -139,19 +115,17 @@
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+ # CONFIG_DISCONTIGMEM_MANUAL is not set
+ # CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ # CONFIG_HPUX is not set
+ #
+@@ -160,13 +134,14 @@
+ # CONFIG_GSC is not set
+ CONFIG_PCI=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+-CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ CONFIG_PCI_LBA=y
+ CONFIG_IOSAPIC=y
+ CONFIG_IOMMU_SBA=y
+-CONFIG_IOMMU_HELPER=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+@@ -183,15 +158,16 @@
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ # CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -199,8 +175,6 @@
+ CONFIG_XFRM_USER=m
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-CONFIG_XFRM_IPCOMP=m
+ CONFIG_NET_KEY=m
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -230,6 +204,7 @@
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
+ CONFIG_IPV6=m
+ # CONFIG_IPV6_PRIVACY is not set
+ # CONFIG_IPV6_ROUTER_PREF is not set
+@@ -245,34 +220,29 @@
+ CONFIG_INET6_XFRM_MODE_BEET=m
+ # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+ CONFIG_IPV6_SIT=m
+-CONFIG_IPV6_NDISC_NODETYPE=y
+ CONFIG_IPV6_TUNNEL=m
+ # CONFIG_IPV6_MULTIPLE_TABLES is not set
+-# CONFIG_IPV6_MROUTE is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ CONFIG_NETFILTER_DEBUG=y
+-CONFIG_NETFILTER_ADVANCED=y
+ #
+ # Core Netfilter Configuration
+ #
+-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+-# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NETFILTER_NETLINK is not set
++# CONFIG_NF_CONNTRACK_ENABLED is not set
+ # CONFIG_NF_CONNTRACK is not set
+ # CONFIG_NETFILTER_XTABLES is not set
+-# CONFIG_IP_VS is not set
+ #
+ # IP: Netfilter Configuration
+ #
+-# CONFIG_NF_DEFRAG_IPV4 is not set
+ CONFIG_IP_NF_QUEUE=m
+ # CONFIG_IP_NF_IPTABLES is not set
+ # CONFIG_IP_NF_ARPTABLES is not set
+ #
+-# IPv6: Netfilter Configuration
++# IPv6: Netfilter Configuration (EXPERIMENTAL)
+ #
+ # CONFIG_IP6_NF_QUEUE is not set
+ # CONFIG_IP6_NF_IPTABLES is not set
+@@ -281,7 +251,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ # CONFIG_LLC2 is not set
+@@ -291,26 +260,28 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+ #
+ CONFIG_NET_PKTGEN=m
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+-# CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -325,8 +296,6 @@
+ # CONFIG_STANDALONE is not set
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -347,62 +316,59 @@
+ # CONFIG_BLK_DEV_RAM is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_HP_ILO is not set
+-# CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_93CX6 is not set
+-CONFIG_HAVE_IDE=y
+ CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
+ #
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
++# Please see Documentation/ide.txt for help/info on IDE drives
+ #
+-CONFIG_IDE_ATAPI=y
+ # CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_IDE_GD=y
+-CONFIG_IDE_GD_ATA=y
+-# CONFIG_IDE_GD_ATAPI is not set
++CONFIG_BLK_DEV_IDEDISK=m
++# CONFIG_IDEDISK_MULTI_MODE is not set
+ CONFIG_BLK_DEV_IDECD=y
+-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+ # CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++CONFIG_BLK_DEV_IDESCSI=y
+ # CONFIG_IDE_TASK_IOCTL is not set
+ CONFIG_IDE_PROC_FS=y
+ #
+ # IDE chipset support/bugfixes
+ #
++CONFIG_IDE_GENERIC=y
+ # CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+ #
+ # PCI IDE chipsets support
+ #
+ CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_SHARE_IRQ=y
+ CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
+ # CONFIG_BLK_DEV_GENERIC is not set
+ # CONFIG_BLK_DEV_OPTI621 is not set
+ CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
++CONFIG_IDEDMA_ONLYDISK=y
+ # CONFIG_BLK_DEV_AEC62XX is not set
+ # CONFIG_BLK_DEV_ALI15X3 is not set
+ # CONFIG_BLK_DEV_AMD74XX is not set
+ # CONFIG_BLK_DEV_CMD64X is not set
+ # CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
+ # CONFIG_BLK_DEV_CS5520 is not set
+ # CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
+ # CONFIG_BLK_DEV_HPT366 is not set
+ # CONFIG_BLK_DEV_JMICRON is not set
+ # CONFIG_BLK_DEV_SC1200 is not set
+ # CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8172 is not set
+ # CONFIG_BLK_DEV_IT8213 is not set
+ # CONFIG_BLK_DEV_IT821X is not set
+ CONFIG_BLK_DEV_NS87415=y
+@@ -414,7 +380,10 @@
+ # CONFIG_BLK_DEV_TRM290 is not set
+ # CONFIG_BLK_DEV_VIA82CXXX is not set
+ # CONFIG_BLK_DEV_TC86C001 is not set
++# CONFIG_IDE_ARM is not set
+ CONFIG_BLK_DEV_IDEDMA=y
++# CONFIG_IDEDMA_IVB is not set
++# CONFIG_BLK_DEV_HD is not set
+ #
+ # SCSI device support
+@@ -453,10 +422,8 @@
+ # CONFIG_SCSI_FC_ATTRS is not set
+ CONFIG_SCSI_ISCSI_ATTRS=m
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+ # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+ # CONFIG_SCSI_3W_9XXX is not set
+ # CONFIG_SCSI_ACARD is not set
+@@ -466,20 +433,16 @@
+ # CONFIG_SCSI_AIC79XX is not set
+ # CONFIG_SCSI_AIC94XX is not set
+ # CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+ # CONFIG_SCSI_ARCMSR is not set
+ # CONFIG_MEGARAID_NEWGEN is not set
+ # CONFIG_MEGARAID_LEGACY is not set
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+ # CONFIG_SCSI_IPS is not set
+ # CONFIG_SCSI_INITIO is not set
+ # CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+ # CONFIG_SCSI_STEX is not set
+ CONFIG_SCSI_SYM53C8XX_2=y
+ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+@@ -495,11 +458,9 @@
+ # CONFIG_SCSI_NSP32 is not set
+ CONFIG_SCSI_DEBUG=m
+ # CONFIG_SCSI_SRP is not set
+-# CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+ CONFIG_MD=y
+ CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_AUTODETECT=y
+ CONFIG_MD_LINEAR=y
+ CONFIG_MD_RAID0=y
+ CONFIG_MD_RAID1=y
+@@ -514,8 +475,13 @@
+ CONFIG_DM_MIRROR=m
+ CONFIG_DM_ZERO=m
+ CONFIG_DM_MULTIPATH=m
++# CONFIG_DM_MULTIPATH_EMC is not set
++# CONFIG_DM_MULTIPATH_RDAC is not set
+ # CONFIG_DM_DELAY is not set
+-# CONFIG_DM_UEVENT is not set
++
++#
++# Fusion MPT device support
++#
+ CONFIG_FUSION=y
+ CONFIG_FUSION_SPI=m
+ # CONFIG_FUSION_FC is not set
+@@ -527,40 +493,20 @@
+ #
+ # IEEE 1394 (FireWire) support
+ #
+-
+-#
+-# Enable only one of the two stacks, unless you know what you are doing
+-#
+ # CONFIG_FIREWIRE is not set
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=m
+ CONFIG_BONDING=m
+ # CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+ # CONFIG_VETH is not set
++# CONFIG_IP1000 is not set
+ # CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=m
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
++# CONFIG_PHYLIB is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=m
+ # CONFIG_HAPPYMEAL is not set
+@@ -582,38 +528,33 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ CONFIG_NET_PCI=y
+ # CONFIG_PCNET32 is not set
+ # CONFIG_AMD8111_ETH is not set
+ # CONFIG_ADAPTEC_STARFIRE is not set
+ # CONFIG_B44 is not set
+ # CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
+ CONFIG_E100=m
+ # CONFIG_FEALNX is not set
+ # CONFIG_NATSEMI is not set
+ # CONFIG_NE2K_PCI is not set
+ # CONFIG_8139CP is not set
+ # CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+ # CONFIG_SIS900 is not set
+ # CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+ # CONFIG_SUNDANCE is not set
+ # CONFIG_TLAN is not set
+ # CONFIG_VIA_RHINE is not set
+ # CONFIG_SC92031 is not set
+-# CONFIG_ATL2 is not set
+ CONFIG_NETDEV_1000=y
+ CONFIG_ACENIC=m
+ # CONFIG_ACENIC_OMIT_TIGON_I is not set
+ # CONFIG_DL2K is not set
+ CONFIG_E1000=m
++# CONFIG_E1000_NAPI is not set
++# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+ # CONFIG_E1000E is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+ # CONFIG_NS83820 is not set
+ # CONFIG_HAMACHI is not set
+ # CONFIG_YELLOWFIN is not set
+@@ -621,31 +562,23 @@
+ # CONFIG_SIS190 is not set
+ # CONFIG_SKGE is not set
+ # CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
+ # CONFIG_VIA_VELOCITY is not set
+ CONFIG_TIGON3=m
+ # CONFIG_BNX2 is not set
+ # CONFIG_QLA3XXX is not set
+ # CONFIG_ATL1 is not set
+-# CONFIG_ATL1E is not set
+-# CONFIG_ATL1C is not set
+-# CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+ # CONFIG_CHELSIO_T3 is not set
+-# CONFIG_ENIC is not set
+ # CONFIG_IXGBE is not set
+ # CONFIG_IXGB is not set
+ # CONFIG_S2IO is not set
+ # CONFIG_MYRI10GE is not set
+ # CONFIG_NETXEN_NIC is not set
+ # CONFIG_NIU is not set
+-# CONFIG_MLX4_EN is not set
+ # CONFIG_MLX4_CORE is not set
+ # CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_QLGE is not set
+-# CONFIG_SFC is not set
+ # CONFIG_TR is not set
+ #
+@@ -653,11 +586,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ #
+ # USB Network Adapters
+@@ -666,6 +594,7 @@
+ # CONFIG_USB_KAWETH is not set
+ # CONFIG_USB_PEGASUS is not set
+ # CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
+ # CONFIG_USB_USBNET is not set
+ # CONFIG_WAN is not set
+ # CONFIG_FDDI is not set
+@@ -683,6 +612,7 @@
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -704,6 +634,7 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
+ # CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+@@ -721,7 +652,6 @@
+ # CONFIG_MOUSE_PS2 is not set
+ # CONFIG_MOUSE_SERIAL is not set
+ # CONFIG_MOUSE_APPLETOUCH is not set
+-# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_VSXXXAA is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+ # CONFIG_INPUT_TABLET is not set
+@@ -742,13 +672,10 @@
+ # Character devices
+ #
+ CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+ #
+ # Serial drivers
+@@ -772,77 +699,72 @@
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+ # CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
++CONFIG_GEN_RTC=y
++CONFIG_GEN_RTC_X=y
+ # CONFIG_R3964 is not set
+ # CONFIG_APPLICOM is not set
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
+ CONFIG_RAW_DRIVER=y
+ CONFIG_MAX_RAW_DEVS=256
+ # CONFIG_TCG_TPM is not set
+ CONFIG_DEVPORT=y
+ # CONFIG_I2C is not set
++
++#
++# SPI support
++#
+ # CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+ #
+-
+-#
+-# Multimedia core support
+-#
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
++# CONFIG_DAB is not set
+ #
+-# Multimedia drivers
++# Graphics support
+ #
+-# CONFIG_DAB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+-# Graphics support
++# Display device support
+ #
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
++# CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+ CONFIG_VIDEO_OUTPUT_CONTROL=m
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
+-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+ # CONFIG_FB_SYS_FILLRECT is not set
+ # CONFIG_FB_SYS_COPYAREA is not set
+ # CONFIG_FB_SYS_IMAGEBLIT is not set
+-# CONFIG_FB_FOREIGN_ENDIAN is not set
+ # CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+@@ -868,7 +790,6 @@
+ # CONFIG_FB_S3 is not set
+ # CONFIG_FB_SAVAGE is not set
+ # CONFIG_FB_SIS is not set
+-# CONFIG_FB_VIA is not set
+ # CONFIG_FB_NEOMAGIC is not set
+ # CONFIG_FB_KYRO is not set
+ # CONFIG_FB_3DFX is not set
+@@ -877,16 +798,7 @@
+ # CONFIG_FB_TRIDENT is not set
+ # CONFIG_FB_ARK is not set
+ # CONFIG_FB_PM3 is not set
+-# CONFIG_FB_CARMINE is not set
+ # CONFIG_FB_VIRTUAL is not set
+-# CONFIG_FB_METRONOME is not set
+-# CONFIG_FB_MB862XX is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+ #
+ # Console display driver support
+@@ -906,8 +818,15 @@
+ # CONFIG_LOGO_LINUX_VGA16 is not set
+ # CONFIG_LOGO_LINUX_CLUT224 is not set
+ CONFIG_LOGO_PARISC_CLUT224=y
++
++#
++# Sound
++#
+ CONFIG_SOUND=y
+-CONFIG_SOUND_OSS_CORE=y
++
++#
++# Advanced Linux Sound Architecture
++#
+ CONFIG_SND=y
+ CONFIG_SND_TIMER=y
+ CONFIG_SND_PCM=y
+@@ -923,16 +842,20 @@
+ CONFIG_SND_VERBOSE_PROCFS=y
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+-CONFIG_SND_VMASTER=y
++
++#
++# Generic devices
++#
+ CONFIG_SND_AC97_CODEC=y
+-CONFIG_SND_DRIVERS=y
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_VIRMIDI is not set
+ # CONFIG_SND_MTPAV is not set
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+-# CONFIG_SND_AC97_POWER_SAVE is not set
+-CONFIG_SND_PCI=y
++
++#
++# PCI devices
++#
+ CONFIG_SND_AD1889=y
+ # CONFIG_SND_ALS300 is not set
+ # CONFIG_SND_ALI5451 is not set
+@@ -941,12 +864,10 @@
+ # CONFIG_SND_AU8810 is not set
+ # CONFIG_SND_AU8820 is not set
+ # CONFIG_SND_AU8830 is not set
+-# CONFIG_SND_AW2 is not set
+ # CONFIG_SND_AZT3328 is not set
+ # CONFIG_SND_BT87X is not set
+ # CONFIG_SND_CA0106 is not set
+ # CONFIG_SND_CMIPCI is not set
+-# CONFIG_SND_OXYGEN is not set
+ # CONFIG_SND_CS4281 is not set
+ # CONFIG_SND_CS46XX is not set
+ # CONFIG_SND_DARLA20 is not set
+@@ -971,7 +892,6 @@
+ # CONFIG_SND_HDA_INTEL is not set
+ # CONFIG_SND_HDSP is not set
+ # CONFIG_SND_HDSPM is not set
+-# CONFIG_SND_HIFIER is not set
+ # CONFIG_SND_ICE1712 is not set
+ # CONFIG_SND_ICE1724 is not set
+ # CONFIG_SND_INTEL8X0 is not set
+@@ -989,59 +909,47 @@
+ # CONFIG_SND_TRIDENT is not set
+ # CONFIG_SND_VIA82XX is not set
+ # CONFIG_SND_VIA82XX_MODEM is not set
+-# CONFIG_SND_VIRTUOSO is not set
+ # CONFIG_SND_VX222 is not set
+ # CONFIG_SND_YMFPCI is not set
+-CONFIG_SND_USB=y
++# CONFIG_SND_AC97_POWER_SAVE is not set
++
++#
++# USB devices
++#
+ # CONFIG_SND_USB_AUDIO is not set
+ # CONFIG_SND_USB_CAIAQ is not set
++
++#
++# System on Chip audio support
++#
+ # CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
+ # CONFIG_SOUND_PRIME is not set
+ CONFIG_AC97_BUS=y
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ # CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+ #
+ # USB Input Devices
+ #
+ CONFIG_USB_HID=y
+-# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
+ CONFIG_USB_HIDDEV=y
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+-# CONFIG_HID_A4TECH is not set
+-# CONFIG_HID_APPLE is not set
+-# CONFIG_HID_BELKIN is not set
+-# CONFIG_HID_CHERRY is not set
+-# CONFIG_HID_CHICONY is not set
+-# CONFIG_HID_CYPRESS is not set
+-# CONFIG_HID_EZKEY is not set
+-# CONFIG_HID_GYRATION is not set
+-# CONFIG_HID_LOGITECH is not set
+-# CONFIG_HID_MICROSOFT is not set
+-# CONFIG_HID_MONTEREY is not set
+-# CONFIG_HID_NTRIG is not set
+-# CONFIG_HID_PANTHERLORD is not set
+-# CONFIG_HID_PETALYNX is not set
+-# CONFIG_HID_SAMSUNG is not set
+-# CONFIG_HID_SONY is not set
+-# CONFIG_HID_SUNPLUS is not set
+-# CONFIG_GREENASIA_FF is not set
+-# CONFIG_HID_TOPSEED is not set
+-# CONFIG_THRUSTMASTER_FF is not set
+-# CONFIG_ZEROPLUS_FF is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ CONFIG_USB_ARCH_HAS_EHCI=y
+ CONFIG_USB=y
+ CONFIG_USB_DEBUG=y
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+ #
+ # Miscellaneous USB options
+@@ -1050,20 +958,12 @@
+ CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+-# CONFIG_USB_OTG_WHITELIST is not set
+-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+-# CONFIG_USB_MON is not set
+-# CONFIG_USB_WUSB is not set
+-# CONFIG_USB_WUSB_CBAF is not set
+ #
+ # USB Host Controller Drivers
+ #
+-# CONFIG_USB_C67X00_HCD is not set
+ # CONFIG_USB_EHCI_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+ # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+ # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+@@ -1071,37 +971,32 @@
+ # CONFIG_USB_UHCI_HCD is not set
+ # CONFIG_USB_SL811_HCD is not set
+ # CONFIG_USB_R8A66597_HCD is not set
+-# CONFIG_USB_WHCI_HCD is not set
+-# CONFIG_USB_HWA_HCD is not set
+ #
+ # USB Device Class drivers
+ #
+ # CONFIG_USB_ACM is not set
+ CONFIG_USB_PRINTER=m
+-# CONFIG_USB_WDM is not set
+-# CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=m
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++CONFIG_USB_STORAGE_DPCM=y
+ CONFIG_USB_STORAGE_USBAT=y
+ CONFIG_USB_STORAGE_SDDR09=y
+ CONFIG_USB_STORAGE_SDDR55=y
+ CONFIG_USB_STORAGE_JUMPSHOT=y
+ # CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_ONETOUCH is not set
+ # CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+ # CONFIG_USB_LIBUSUAL is not set
+ #
+@@ -1109,10 +1004,15 @@
+ #
+ CONFIG_USB_MDC800=m
+ CONFIG_USB_MICROTEK=m
++# CONFIG_USB_MON is not set
+ #
+ # USB port drivers
+ #
++
++#
++# USB Serial Converter support
++#
+ # CONFIG_USB_SERIAL is not set
+ #
+@@ -1121,7 +1021,7 @@
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
+ # CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_AUERSWALD is not set
+ # CONFIG_USB_RIO500 is not set
+ CONFIG_USB_LEGOTOWER=m
+ # CONFIG_USB_LCD is not set
+@@ -1137,59 +1037,37 @@
+ # CONFIG_USB_TRANCEVIBRATOR is not set
+ # CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+-# CONFIG_USB_ISIGHTFW is not set
+-# CONFIG_USB_VST is not set
+-# CONFIG_USB_GADGET is not set
+ #
+-# OTG and related infrastructure
++# USB DSL modem support
+ #
+-# CONFIG_UWB is not set
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++# CONFIG_RTC_CLASS is not set
+ #
+-# RTC interfaces
++# DMA Engine support
+ #
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_DMA_ENGINE is not set
+ #
+-# SPI RTC drivers
++# DMA Clients
+ #
+ #
+-# Platform RTC drivers
++# DMA Devices
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+ #
+-# on-CPU RTC drivers
++# Userspace I/O
+ #
+-CONFIG_RTC_DRV_PARISC=y
+-# CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -1199,24 +1077,25 @@
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4_FS is not set
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+-CONFIG_FILE_LOCKING=y
+ CONFIG_XFS_FS=m
+ # CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_SECURITY is not set
+ # CONFIG_XFS_POSIX_ACL is not set
+ # CONFIG_XFS_RT is not set
+-# CONFIG_XFS_DEBUG is not set
++# CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+-CONFIG_DNOTIFY=y
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
+ # CONFIG_FUSE_FS is not set
+@@ -1245,13 +1124,16 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -1260,31 +1142,32 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Network File Systems
++#
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+-CONFIG_ROOT_NFS=y
++# CONFIG_NFS_DIRECTIO is not set
+ CONFIG_NFSD=y
+ CONFIG_NFSD_V3=y
+ # CONFIG_NFSD_V3_ACL is not set
+ # CONFIG_NFSD_V4 is not set
++# CONFIG_NFSD_TCP is not set
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_EXPORTFS=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
++# CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+@@ -1298,6 +1181,10 @@
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -1338,28 +1225,33 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
++
++#
++# Distributed Lock Manager
++#
+ # CONFIG_DLM is not set
+ #
++# Profiling support
++#
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
++# CONFIG_DEBUG_FS is not set
+ CONFIG_HEADERS_CHECK=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+@@ -1371,33 +1263,10 @@
+ # CONFIG_DEBUG_BUGVERBOSE is not set
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-# CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
++CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-CONFIG_NOP_TRACER=y
+-CONFIG_RING_BUFFER=y
+-CONFIG_TRACING=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_FTRACE_STARTUP_TEST is not set
+-# CONFIG_BUILD_DOCSRC is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_RODATA=y
+ #
+@@ -1405,110 +1274,54 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=m
+-CONFIG_CRYPTO_ALGAPI2=m
+-CONFIG_CRYPTO_AEAD2=m
+ CONFIG_CRYPTO_BLKCIPHER=m
+-CONFIG_CRYPTO_BLKCIPHER2=m
+-CONFIG_CRYPTO_HASH=m
+-CONFIG_CRYPTO_HASH2=m
+-CONFIG_CRYPTO_RNG2=m
+ CONFIG_CRYPTO_MANAGER=m
+-CONFIG_CRYPTO_MANAGER2=m
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_NULL=m
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-CONFIG_CRYPTO_TEST=m
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=m
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+ # CONFIG_CRYPTO_HMAC is not set
+ # CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_NULL=m
+ # CONFIG_CRYPTO_MD4 is not set
+ CONFIG_CRYPTO_MD5=m
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+ # CONFIG_CRYPTO_SHA1 is not set
+ # CONFIG_CRYPTO_SHA256 is not set
+ # CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+ # CONFIG_CRYPTO_WP512 is not set
+-
+-#
+-# Ciphers
+-#
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
+ CONFIG_CRYPTO_BLOWFISH=m
+-# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
+ # CONFIG_CRYPTO_CAST5 is not set
+ # CONFIG_CRYPTO_CAST6 is not set
+-CONFIG_CRYPTO_DES=m
+-# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
+ # CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-
+-#
+-# Compression
+-#
+ CONFIG_CRYPTO_DEFLATE=m
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
+ # CONFIG_CRYPTO_HW is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/configs/default_defconfig linux-2.6.29-rc3.owrt/arch/parisc/configs/default_defconfig
+--- linux-2.6.29.owrt/arch/parisc/configs/default_defconfig    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/configs/default_defconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 01:32:59 2009
++# Linux kernel version: 2.6.23
++# Fri Oct 12 20:54:57 2007
+ #
+ CONFIG_PARISC=y
+ CONFIG_MMU=y
+@@ -33,35 +33,17 @@
+ CONFIG_POSIX_MQUEUE=y
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=16
+-# CONFIG_GROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+-CONFIG_NAMESPACES=y
+-# CONFIG_UTS_NS is not set
+-# CONFIG_IPC_NS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+-# CONFIG_NET_NS is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+ # CONFIG_EMBEDDED is not set
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+@@ -73,39 +55,29 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_PCI_QUIRKS=y
+-CONFIG_COMPAT_BRK=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-CONFIG_PROFILING=y
+-CONFIG_TRACEPOINTS=y
+-# CONFIG_MARKERS is not set
+-CONFIG_OPROFILE=m
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+-CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+-# CONFIG_BLK_DEV_INTEGRITY is not set
+ #
+ # IO Schedulers
+@@ -119,7 +91,6 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+-# CONFIG_FREEZER is not set
+ #
+ # Processor type and features
+@@ -143,19 +114,17 @@
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+ # CONFIG_DISCONTIGMEM_MANUAL is not set
+ # CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-CONFIG_PAGEFLAGS_EXTENDED=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+-# CONFIG_PHYS_ADDR_T_64BIT is not set
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-CONFIG_UNEVICTABLE_LRU=y
+ # CONFIG_HPUX is not set
+ #
+@@ -171,14 +140,15 @@
+ # CONFIG_ISA is not set
+ CONFIG_PCI=y
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+-CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ CONFIG_GSC_DINO=y
+ CONFIG_PCI_LBA=y
+ CONFIG_IOSAPIC=y
+ CONFIG_IOMMU_SBA=y
+-CONFIG_IOMMU_HELPER=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
+ CONFIG_PCCARD=y
+ # CONFIG_PCMCIA_DEBUG is not set
+ CONFIG_PCMCIA=y
+@@ -213,15 +183,16 @@
+ # Executable file formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ CONFIG_BINFMT_MISC=m
++
++#
++# Networking
++#
+ CONFIG_NET=y
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -229,8 +200,6 @@
+ CONFIG_XFRM_USER=m
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-CONFIG_XFRM_IPCOMP=y
+ CONFIG_NET_KEY=m
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -276,10 +245,8 @@
+ CONFIG_INET6_XFRM_MODE_BEET=y
+ # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+ CONFIG_IPV6_SIT=y
+-CONFIG_IPV6_NDISC_NODETYPE=y
+ # CONFIG_IPV6_TUNNEL is not set
+ # CONFIG_IPV6_MULTIPLE_TABLES is not set
+-# CONFIG_IPV6_MROUTE is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+@@ -287,7 +254,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ CONFIG_LLC=m
+@@ -298,26 +264,28 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ # CONFIG_CFG80211 is not set
+-CONFIG_WIRELESS_OLD_REGULATORY=y
+ # CONFIG_WIRELESS_EXT is not set
+-# CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
++# CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -332,8 +300,6 @@
+ # CONFIG_STANDALONE is not set
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ CONFIG_FW_LOADER=y
+-CONFIG_FIRMWARE_IN_KERNEL=y
+-CONFIG_EXTRA_FIRMWARE=""
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -364,68 +330,63 @@
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=6144
+-# CONFIG_BLK_DEV_XIP is not set
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_HP_ILO is not set
+-# CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_93CX6 is not set
+-CONFIG_HAVE_IDE=y
+ CONFIG_IDE=y
++CONFIG_BLK_DEV_IDE=y
+ #
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
++# Please see Documentation/ide.txt for help/info on IDE drives
+ #
+-CONFIG_IDE_ATAPI=y
+ # CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_IDE_GD=y
+-CONFIG_IDE_GD_ATA=y
+-# CONFIG_IDE_GD_ATAPI is not set
++CONFIG_BLK_DEV_IDEDISK=y
++CONFIG_IDEDISK_MULTI_MODE=y
+ CONFIG_BLK_DEV_IDECS=y
+ # CONFIG_BLK_DEV_DELKIN is not set
+ CONFIG_BLK_DEV_IDECD=y
+-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+ # CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++CONFIG_BLK_DEV_IDESCSI=y
+ # CONFIG_IDE_TASK_IOCTL is not set
+ CONFIG_IDE_PROC_FS=y
+ #
+ # IDE chipset support/bugfixes
+ #
++CONFIG_IDE_GENERIC=y
+ # CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+ #
+ # PCI IDE chipsets support
+ #
+ CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_SHARE_IRQ=y
+ CONFIG_IDEPCI_PCIBUS_ORDER=y
+ # CONFIG_BLK_DEV_OFFBOARD is not set
+ CONFIG_BLK_DEV_GENERIC=y
+ # CONFIG_BLK_DEV_OPTI621 is not set
+ CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
++CONFIG_IDEDMA_ONLYDISK=y
+ # CONFIG_BLK_DEV_AEC62XX is not set
+ # CONFIG_BLK_DEV_ALI15X3 is not set
+ # CONFIG_BLK_DEV_AMD74XX is not set
+ # CONFIG_BLK_DEV_CMD64X is not set
+ # CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
+ # CONFIG_BLK_DEV_CS5520 is not set
+ # CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
+ # CONFIG_BLK_DEV_HPT366 is not set
+ # CONFIG_BLK_DEV_JMICRON is not set
+ # CONFIG_BLK_DEV_SC1200 is not set
+ # CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8172 is not set
+ # CONFIG_BLK_DEV_IT8213 is not set
+ # CONFIG_BLK_DEV_IT821X is not set
+ CONFIG_BLK_DEV_NS87415=y
+@@ -437,7 +398,10 @@
+ # CONFIG_BLK_DEV_TRM290 is not set
+ # CONFIG_BLK_DEV_VIA82CXXX is not set
+ # CONFIG_BLK_DEV_TC86C001 is not set
++# CONFIG_IDE_ARM is not set
+ CONFIG_BLK_DEV_IDEDMA=y
++# CONFIG_IDEDMA_IVB is not set
++# CONFIG_BLK_DEV_HD is not set
+ #
+ # SCSI device support
+@@ -476,10 +440,8 @@
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+ # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+ # CONFIG_SCSI_3W_9XXX is not set
+ # CONFIG_SCSI_ACARD is not set
+@@ -490,14 +452,11 @@
+ # CONFIG_SCSI_AIC79XX is not set
+ # CONFIG_SCSI_AIC94XX is not set
+ # CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+ # CONFIG_SCSI_ARCMSR is not set
+ # CONFIG_MEGARAID_NEWGEN is not set
+ # CONFIG_MEGARAID_LEGACY is not set
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+ # CONFIG_SCSI_IPS is not set
+@@ -505,7 +464,6 @@
+ # CONFIG_SCSI_INIA100 is not set
+ # CONFIG_SCSI_PPA is not set
+ # CONFIG_SCSI_IMM is not set
+-# CONFIG_SCSI_MVSAS is not set
+ CONFIG_SCSI_LASI700=y
+ CONFIG_53C700_LE_ON_BE=y
+ # CONFIG_SCSI_STEX is not set
+@@ -529,11 +487,9 @@
+ # CONFIG_SCSI_DEBUG is not set
+ # CONFIG_SCSI_SRP is not set
+ # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+-# CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+ CONFIG_MD=y
+ CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_AUTODETECT=y
+ CONFIG_MD_LINEAR=y
+ CONFIG_MD_RAID0=y
+ CONFIG_MD_RAID1=y
+@@ -549,47 +505,32 @@
+ # CONFIG_DM_ZERO is not set
+ # CONFIG_DM_MULTIPATH is not set
+ # CONFIG_DM_DELAY is not set
+-# CONFIG_DM_UEVENT is not set
+-# CONFIG_FUSION is not set
+ #
+-# IEEE 1394 (FireWire) support
++# Fusion MPT device support
+ #
++# CONFIG_FUSION is not set
++# CONFIG_FUSION_SPI is not set
++# CONFIG_FUSION_FC is not set
++# CONFIG_FUSION_SAS is not set
+ #
+-# Enable only one of the two stacks, unless you know what you are doing
++# IEEE 1394 (FireWire) support
+ #
+ # CONFIG_FIREWIRE is not set
+ # CONFIG_IEEE1394 is not set
+ # CONFIG_I2O is not set
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=m
+ CONFIG_BONDING=m
+ # CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+ # CONFIG_VETH is not set
++# CONFIG_IP1000 is not set
+ # CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
++# CONFIG_PHYLIB is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=m
+ CONFIG_LASI_82596=y
+@@ -609,15 +550,13 @@
+ # CONFIG_DM9102 is not set
+ # CONFIG_ULI526X is not set
+ # CONFIG_PCMCIA_XIRCOM is not set
++# CONFIG_PCMCIA_XIRTULIP is not set
+ # CONFIG_DEPCA is not set
+ # CONFIG_HP100 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ CONFIG_NET_PCI=y
+ # CONFIG_PCNET32 is not set
+ # CONFIG_AMD8111_ETH is not set
+@@ -625,7 +564,7 @@
+ # CONFIG_AC3200 is not set
+ # CONFIG_B44 is not set
+ # CONFIG_FORCEDETH is not set
+-# CONFIG_CS89x0 is not set
++# CONFIG_EEPRO100 is not set
+ # CONFIG_E100 is not set
+ # CONFIG_LNE390 is not set
+ # CONFIG_FEALNX is not set
+@@ -635,24 +574,19 @@
+ # CONFIG_ES3210 is not set
+ # CONFIG_8139CP is not set
+ # CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+ # CONFIG_SIS900 is not set
+ # CONFIG_EPIC100 is not set
+-# CONFIG_SMSC9420 is not set
+ # CONFIG_SUNDANCE is not set
+ # CONFIG_TLAN is not set
+ # CONFIG_VIA_RHINE is not set
+ # CONFIG_SC92031 is not set
+ # CONFIG_NET_POCKET is not set
+-# CONFIG_ATL2 is not set
+ CONFIG_NETDEV_1000=y
+ CONFIG_ACENIC=y
+ # CONFIG_ACENIC_OMIT_TIGON_I is not set
+ # CONFIG_DL2K is not set
+ # CONFIG_E1000 is not set
+ # CONFIG_E1000E is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+ # CONFIG_NS83820 is not set
+ # CONFIG_HAMACHI is not set
+ # CONFIG_YELLOWFIN is not set
+@@ -660,31 +594,23 @@
+ # CONFIG_SIS190 is not set
+ # CONFIG_SKGE is not set
+ # CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
+ # CONFIG_VIA_VELOCITY is not set
+ CONFIG_TIGON3=y
+ # CONFIG_BNX2 is not set
+ # CONFIG_QLA3XXX is not set
+ # CONFIG_ATL1 is not set
+-# CONFIG_ATL1E is not set
+-# CONFIG_ATL1C is not set
+-# CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+ # CONFIG_CHELSIO_T3 is not set
+-# CONFIG_ENIC is not set
+ # CONFIG_IXGBE is not set
+ # CONFIG_IXGB is not set
+ # CONFIG_S2IO is not set
+ # CONFIG_MYRI10GE is not set
+ # CONFIG_NETXEN_NIC is not set
+ # CONFIG_NIU is not set
+-# CONFIG_MLX4_EN is not set
+ # CONFIG_MLX4_CORE is not set
+ # CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_QLGE is not set
+-# CONFIG_SFC is not set
+ # CONFIG_TR is not set
+ #
+@@ -692,11 +618,6 @@
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ #
+ # USB Network Adapters
+@@ -705,6 +626,7 @@
+ # CONFIG_USB_KAWETH is not set
+ # CONFIG_USB_PEGASUS is not set
+ # CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
+ # CONFIG_USB_USBNET is not set
+ CONFIG_NET_PCMCIA=y
+ # CONFIG_PCMCIA_3C589 is not set
+@@ -732,6 +654,7 @@
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -753,6 +676,7 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+@@ -775,12 +699,11 @@
+ CONFIG_MOUSE_PS2_ALPS=y
+ CONFIG_MOUSE_PS2_LOGIPS2PP=y
+ CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_LIFEBOOK=y
+ CONFIG_MOUSE_PS2_TRACKPOINT=y
+-# CONFIG_MOUSE_PS2_ELANTECH is not set
+ # CONFIG_MOUSE_PS2_TOUCHKIT is not set
+ CONFIG_MOUSE_SERIAL=y
+ # CONFIG_MOUSE_APPLETOUCH is not set
+-# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_VSXXXAA is not set
+ CONFIG_MOUSE_HIL=y
+ # CONFIG_INPUT_JOYSTICK is not set
+@@ -806,13 +729,10 @@
+ # Character devices
+ #
+ CONFIG_VT=y
+-CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+ # CONFIG_VT_HW_CONSOLE_BINDING is not set
+-CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+ #
+ # Serial drivers
+@@ -839,16 +759,21 @@
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=64
+ CONFIG_PRINTER=m
+ # CONFIG_LP_CONSOLE is not set
+ CONFIG_PPDEV=m
++# CONFIG_TIPAR is not set
+ # CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
++CONFIG_GEN_RTC=y
++CONFIG_GEN_RTC_X=y
+ # CONFIG_R3964 is not set
+ # CONFIG_APPLICOM is not set
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
+ #
+ # PCMCIA character devices
+@@ -856,70 +781,60 @@
+ # CONFIG_SYNCLINK_CS is not set
+ # CONFIG_CARDMAN_4000 is not set
+ # CONFIG_CARDMAN_4040 is not set
+-# CONFIG_IPWIRELESS is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+ CONFIG_DEVPORT=y
+ # CONFIG_I2C is not set
++
++#
++# SPI support
++#
+ # CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+-# CONFIG_HTC_PASIC3 is not set
+-# CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+ #
+-
+-#
+-# Multimedia core support
+-#
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
++# CONFIG_DAB is not set
+ #
+-# Multimedia drivers
++# Graphics support
+ #
+-# CONFIG_DAB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+-# Graphics support
++# Display device support
+ #
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
++# CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+ CONFIG_VIDEO_OUTPUT_CONTROL=m
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
+-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+ # CONFIG_FB_SYS_FILLRECT is not set
+ # CONFIG_FB_SYS_COPYAREA is not set
+ # CONFIG_FB_SYS_IMAGEBLIT is not set
+-# CONFIG_FB_FOREIGN_ENDIAN is not set
+ # CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+@@ -945,7 +860,6 @@
+ # CONFIG_FB_S3 is not set
+ # CONFIG_FB_SAVAGE is not set
+ # CONFIG_FB_SIS is not set
+-# CONFIG_FB_VIA is not set
+ # CONFIG_FB_NEOMAGIC is not set
+ # CONFIG_FB_KYRO is not set
+ # CONFIG_FB_3DFX is not set
+@@ -954,16 +868,7 @@
+ # CONFIG_FB_TRIDENT is not set
+ # CONFIG_FB_ARK is not set
+ # CONFIG_FB_PM3 is not set
+-# CONFIG_FB_CARMINE is not set
+ # CONFIG_FB_VIRTUAL is not set
+-# CONFIG_FB_METRONOME is not set
+-# CONFIG_FB_MB862XX is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+ #
+ # Console display driver support
+@@ -991,8 +896,15 @@
+ # CONFIG_LOGO_LINUX_VGA16 is not set
+ # CONFIG_LOGO_LINUX_CLUT224 is not set
+ CONFIG_LOGO_PARISC_CLUT224=y
++
++#
++# Sound
++#
+ CONFIG_SOUND=y
+-CONFIG_SOUND_OSS_CORE=y
++
++#
++# Advanced Linux Sound Architecture
++#
+ CONFIG_SND=y
+ CONFIG_SND_TIMER=y
+ CONFIG_SND_PCM=y
+@@ -1008,9 +920,11 @@
+ CONFIG_SND_VERBOSE_PROCFS=y
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+-CONFIG_SND_VMASTER=y
++
++#
++# Generic devices
++#
+ CONFIG_SND_AC97_CODEC=y
+-CONFIG_SND_DRIVERS=y
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_VIRMIDI is not set
+ # CONFIG_SND_MTPAV is not set
+@@ -1018,8 +932,10 @@
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+ # CONFIG_SND_PORTMAN2X4 is not set
+-# CONFIG_SND_AC97_POWER_SAVE is not set
+-CONFIG_SND_PCI=y
++
++#
++# PCI devices
++#
+ CONFIG_SND_AD1889=y
+ # CONFIG_SND_ALS300 is not set
+ # CONFIG_SND_ALI5451 is not set
+@@ -1028,12 +944,10 @@
+ # CONFIG_SND_AU8810 is not set
+ # CONFIG_SND_AU8820 is not set
+ # CONFIG_SND_AU8830 is not set
+-# CONFIG_SND_AW2 is not set
+ # CONFIG_SND_AZT3328 is not set
+ # CONFIG_SND_BT87X is not set
+ # CONFIG_SND_CA0106 is not set
+ # CONFIG_SND_CMIPCI is not set
+-# CONFIG_SND_OXYGEN is not set
+ # CONFIG_SND_CS4281 is not set
+ # CONFIG_SND_CS46XX is not set
+ # CONFIG_SND_DARLA20 is not set
+@@ -1058,7 +972,6 @@
+ # CONFIG_SND_HDA_INTEL is not set
+ # CONFIG_SND_HDSP is not set
+ # CONFIG_SND_HDSPM is not set
+-# CONFIG_SND_HIFIER is not set
+ # CONFIG_SND_ICE1712 is not set
+ # CONFIG_SND_ICE1724 is not set
+ # CONFIG_SND_INTEL8X0 is not set
+@@ -1076,67 +989,58 @@
+ # CONFIG_SND_TRIDENT is not set
+ # CONFIG_SND_VIA82XX is not set
+ # CONFIG_SND_VIA82XX_MODEM is not set
+-# CONFIG_SND_VIRTUOSO is not set
+ # CONFIG_SND_VX222 is not set
+ # CONFIG_SND_YMFPCI is not set
+-CONFIG_SND_USB=y
++# CONFIG_SND_AC97_POWER_SAVE is not set
++
++#
++# USB devices
++#
+ # CONFIG_SND_USB_AUDIO is not set
+ # CONFIG_SND_USB_CAIAQ is not set
+-CONFIG_SND_PCMCIA=y
++
++#
++# PCMCIA devices
++#
+ # CONFIG_SND_VXPOCKET is not set
+ # CONFIG_SND_PDAUDIOCF is not set
+-CONFIG_SND_GSC=y
++
++#
++# GSC devices
++#
+ CONFIG_SND_HARMONY=y
++
++#
++# System on Chip audio support
++#
+ # CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
+ # CONFIG_SOUND_PRIME is not set
+ CONFIG_AC97_BUS=y
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ CONFIG_HID_DEBUG=y
+-# CONFIG_HIDRAW is not set
+ #
+ # USB Input Devices
+ #
+ CONFIG_USB_HID=y
+-# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
+ # CONFIG_USB_HIDDEV is not set
+-
+-#
+-# Special HID drivers
+-#
+-CONFIG_HID_COMPAT=y
+-CONFIG_HID_A4TECH=y
+-CONFIG_HID_APPLE=y
+-CONFIG_HID_BELKIN=y
+-CONFIG_HID_CHERRY=y
+-CONFIG_HID_CHICONY=y
+-CONFIG_HID_CYPRESS=y
+-CONFIG_HID_EZKEY=y
+-CONFIG_HID_GYRATION=y
+-CONFIG_HID_LOGITECH=y
+-# CONFIG_LOGITECH_FF is not set
+-# CONFIG_LOGIRUMBLEPAD2_FF is not set
+-CONFIG_HID_MICROSOFT=y
+-CONFIG_HID_MONTEREY=y
+-CONFIG_HID_NTRIG=y
+-CONFIG_HID_PANTHERLORD=y
+-# CONFIG_PANTHERLORD_FF is not set
+-CONFIG_HID_PETALYNX=y
+-CONFIG_HID_SAMSUNG=y
+-CONFIG_HID_SONY=y
+-CONFIG_HID_SUNPLUS=y
+-# CONFIG_GREENASIA_FF is not set
+-CONFIG_HID_TOPSEED=y
+-# CONFIG_THRUSTMASTER_FF is not set
+-# CONFIG_ZEROPLUS_FF is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ CONFIG_USB_ARCH_HAS_EHCI=y
+ CONFIG_USB=y
+ # CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+ #
+ # Miscellaneous USB options
+@@ -1145,18 +1049,12 @@
+ CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+-CONFIG_USB_MON=y
+-# CONFIG_USB_WUSB is not set
+-# CONFIG_USB_WUSB_CBAF is not set
+ #
+ # USB Host Controller Drivers
+ #
+-# CONFIG_USB_C67X00_HCD is not set
+ # CONFIG_USB_EHCI_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+ # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+ # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+@@ -1164,23 +1062,19 @@
+ CONFIG_USB_UHCI_HCD=y
+ # CONFIG_USB_SL811_HCD is not set
+ # CONFIG_USB_R8A66597_HCD is not set
+-# CONFIG_USB_WHCI_HCD is not set
+-# CONFIG_USB_HWA_HCD is not set
+ #
+ # USB Device Class drivers
+ #
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+-# CONFIG_USB_WDM is not set
+-# CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ # CONFIG_USB_STORAGE is not set
+ # CONFIG_USB_LIBUSUAL is not set
+@@ -1190,11 +1084,16 @@
+ #
+ # CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
+ #
+ # USB port drivers
+ #
+ # CONFIG_USB_USS720 is not set
++
++#
++# USB Serial Converter support
++#
+ # CONFIG_USB_SERIAL is not set
+ #
+@@ -1203,7 +1102,7 @@
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
+ # CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_AUERSWALD is not set
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
+@@ -1219,60 +1118,38 @@
+ # CONFIG_USB_TRANCEVIBRATOR is not set
+ # CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+-# CONFIG_USB_ISIGHTFW is not set
+-# CONFIG_USB_VST is not set
+-# CONFIG_USB_GADGET is not set
+ #
+-# OTG and related infrastructure
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
+ #
+-# CONFIG_UWB is not set
++# CONFIG_USB_GADGET is not set
+ # CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+-# CONFIG_ACCESSIBILITY is not set
+ # CONFIG_INFINIBAND is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++# CONFIG_RTC_CLASS is not set
+ #
+-# RTC interfaces
++# DMA Engine support
+ #
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_DMA_ENGINE is not set
+ #
+-# SPI RTC drivers
++# DMA Clients
+ #
+ #
+-# Platform RTC drivers
++# DMA Devices
+ #
+-# CONFIG_RTC_DRV_DS1286 is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
++# CONFIG_AUXDISPLAY is not set
+ #
+-# on-CPU RTC drivers
++# Userspace I/O
+ #
+-CONFIG_RTC_DRV_PARISC=y
+-# CONFIG_DMADEVICES is not set
+-# CONFIG_AUXDISPLAY is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -1282,20 +1159,21 @@
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4_FS is not set
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ CONFIG_FS_POSIX_ACL=y
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+-CONFIG_DNOTIFY=y
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
+ CONFIG_AUTOFS_FS=y
+ # CONFIG_AUTOFS4_FS is not set
+ # CONFIG_FUSE_FS is not set
+@@ -1324,13 +1202,16 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_ECRYPT_FS is not set
+@@ -1340,32 +1221,33 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
++
++#
++# Network File Systems
++#
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+-CONFIG_ROOT_NFS=y
++# CONFIG_NFS_DIRECTIO is not set
+ CONFIG_NFSD=y
+ CONFIG_NFSD_V3=y
+ # CONFIG_NFSD_V3_ACL is not set
+ CONFIG_NFSD_V4=y
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_EXPORTFS=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
++# CONFIG_SUNRPC_BIND34 is not set
+ CONFIG_RPCSEC_GSS_KRB5=y
+ CONFIG_RPCSEC_GSS_SPKM3=m
+ CONFIG_SMB_FS=m
+@@ -1374,7 +1256,6 @@
+ CONFIG_CIFS=m
+ # CONFIG_CIFS_STATS is not set
+ # CONFIG_CIFS_WEAK_PW_HASH is not set
+-# CONFIG_CIFS_UPCALL is not set
+ # CONFIG_CIFS_XATTR is not set
+ # CONFIG_CIFS_DEBUG2 is not set
+ # CONFIG_CIFS_EXPERIMENTAL is not set
+@@ -1387,6 +1268,10 @@
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+@@ -1427,28 +1312,33 @@
+ CONFIG_NLS_KOI8_R=m
+ CONFIG_NLS_KOI8_U=m
+ CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
+ # CONFIG_DLM is not set
+ #
++# Profiling support
++#
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
++# CONFIG_DEBUG_FS is not set
+ CONFIG_HEADERS_CHECK=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+@@ -1460,33 +1350,10 @@
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_WRITECOUNT is not set
+-CONFIG_DEBUG_MEMORY_INIT=y
+ # CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
++CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+-CONFIG_NOP_TRACER=y
+-CONFIG_RING_BUFFER=y
+-CONFIG_TRACING=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_FTRACE_STARTUP_TEST is not set
+-# CONFIG_BUILD_DOCSRC is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+-# CONFIG_SAMPLES is not set
+ # CONFIG_DEBUG_RODATA is not set
+ #
+@@ -1495,112 +1362,56 @@
+ CONFIG_KEYS=y
+ CONFIG_KEYS_DEBUG_PROC_KEYS=y
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+-
+-#
+-# Crypto core or helper
+-#
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD=y
+-CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_NULL=m
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_AUTHENC=y
+-CONFIG_CRYPTO_TEST=m
+-
+-#
+-# Authenticated Encryption with Associated Data
+-#
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
+-
+-#
+-# Block modes
+-#
+-CONFIG_CRYPTO_CBC=y
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_XTS is not set
+-
+-#
+-# Hash modes
+-#
+ CONFIG_CRYPTO_HMAC=y
+ # CONFIG_CRYPTO_XCBC is not set
+-
+-#
+-# Digest
+-#
+-CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_NULL=m
+ CONFIG_CRYPTO_MD4=m
+ CONFIG_CRYPTO_MD5=y
+-CONFIG_CRYPTO_MICHAEL_MIC=m
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+ CONFIG_CRYPTO_SHA1=y
+ CONFIG_CRYPTO_SHA256=m
+ CONFIG_CRYPTO_SHA512=m
+-CONFIG_CRYPTO_TGR192=m
+ CONFIG_CRYPTO_WP512=m
+-
+-#
+-# Ciphers
+-#
+-CONFIG_CRYPTO_AES=m
+-CONFIG_CRYPTO_ANUBIS=m
+-CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_TGR192=m
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
+ CONFIG_CRYPTO_BLOWFISH=m
+-# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
+ CONFIG_CRYPTO_CAST5=m
+ CONFIG_CRYPTO_CAST6=m
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_ARC4=m
+ CONFIG_CRYPTO_KHAZAD=m
+-# CONFIG_CRYPTO_SALSA20 is not set
++CONFIG_CRYPTO_ANUBIS=m
+ # CONFIG_CRYPTO_SEED is not set
+-CONFIG_CRYPTO_SERPENT=m
+-CONFIG_CRYPTO_TEA=m
+-CONFIG_CRYPTO_TWOFISH=m
+-CONFIG_CRYPTO_TWOFISH_COMMON=m
+-
+-#
+-# Compression
+-#
+ CONFIG_CRYPTO_DEFLATE=y
+-# CONFIG_CRYPTO_LZO is not set
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
+ # CONFIG_CRYPTO_HW is not set
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+ # CONFIG_CRC7 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/hpux/fs.c linux-2.6.29-rc3.owrt/arch/parisc/hpux/fs.c
+--- linux-2.6.29.owrt/arch/parisc/hpux/fs.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/hpux/fs.c        2009-05-10 23:48:28.000000000 +0200
+@@ -137,6 +137,7 @@
+                       error = count - buf.count;
+       }
++out_putf:
+       fput(file);
+ out:
+       return error;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/include/asm/assembly.h linux-2.6.29-rc3.owrt/arch/parisc/include/asm/assembly.h
+--- linux-2.6.29.owrt/arch/parisc/include/asm/assembly.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/include/asm/assembly.h   2009-05-10 23:48:28.000000000 +0200
+@@ -79,7 +79,6 @@
+ #include <asm/asm-offsets.h>
+ #include <asm/page.h>
+-#include <asm/types.h>
+ #include <asm/asmregs.h>
+@@ -130,27 +129,27 @@
+       /* Shift Left - note the r and t can NOT be the same! */
+       .macro shl r, sa, t
+-      dep,z   \r, 31-(\sa), 32-(\sa), \t
++      dep,z   \r, 31-\sa, 32-\sa, \t
+       .endm
+       /* The PA 2.0 shift left */
+       .macro shlw r, sa, t
+-      depw,z  \r, 31-(\sa), 32-(\sa), \t
++      depw,z  \r, 31-\sa, 32-\sa, \t
+       .endm
+       /* And the PA 2.0W shift left */
+       .macro shld r, sa, t
+-      depd,z  \r, 63-(\sa), 64-(\sa), \t
++      depd,z  \r, 63-\sa, 64-\sa, \t
+       .endm
+       /* Shift Right - note the r and t can NOT be the same! */
+       .macro shr r, sa, t
+-      extru \r, 31-(\sa), 32-(\sa), \t
++      extru \r, 31-\sa, 32-\sa, \t
+       .endm
+       /* pa20w version of shift right */
+       .macro shrd r, sa, t
+-      extrd,u \r, 63-(\sa), 64-(\sa), \t
++      extrd,u \r, 63-\sa, 64-\sa, \t
+       .endm
+       /* load 32-bit 'value' into 'reg' compensating for the ldil
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/include/asm/dma-mapping.h linux-2.6.29-rc3.owrt/arch/parisc/include/asm/dma-mapping.h
+--- linux-2.6.29.owrt/arch/parisc/include/asm/dma-mapping.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/include/asm/dma-mapping.h        2009-05-10 23:48:28.000000000 +0200
+@@ -5,7 +5,7 @@
+ #include <asm/cacheflush.h>
+ #include <asm/scatterlist.h>
+-/* See Documentation/PCI/PCI-DMA-mapping.txt */
++/* See Documentation/DMA-mapping.txt */
+ struct hppa_dma_ops {
+       int  (*dma_supported)(struct device *dev, u64 mask);
+       void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/include/asm/io.h linux-2.6.29-rc3.owrt/arch/parisc/include/asm/io.h
+--- linux-2.6.29.owrt/arch/parisc/include/asm/io.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/include/asm/io.h 2009-05-10 23:48:28.000000000 +0200
+@@ -174,48 +174,15 @@
+       *(volatile unsigned long long __force *) addr = b;
+ }
+-static inline unsigned char readb(const volatile void __iomem *addr)
+-{
+-      return __raw_readb(addr);
+-}
+-static inline unsigned short readw(const volatile void __iomem *addr)
+-{
+-      return le16_to_cpu(__raw_readw(addr));
+-}
+-static inline unsigned int readl(const volatile void __iomem *addr)
+-{
+-      return le32_to_cpu(__raw_readl(addr));
+-}
+-static inline unsigned long long readq(const volatile void __iomem *addr)
+-{
+-      return le64_to_cpu(__raw_readq(addr));
+-}
+-
+-static inline void writeb(unsigned char b, volatile void __iomem *addr)
+-{
+-      __raw_writeb(b, addr);
+-}
+-static inline void writew(unsigned short w, volatile void __iomem *addr)
+-{
+-      __raw_writew(cpu_to_le16(w), addr);
+-}
+-static inline void writel(unsigned int l, volatile void __iomem *addr)
+-{
+-      __raw_writel(cpu_to_le32(l), addr);
+-}
+-static inline void writeq(unsigned long long q, volatile void __iomem *addr)
+-{
+-      __raw_writeq(cpu_to_le64(q), addr);
+-}
+-
+-#define       readb   readb
+-#define       readw   readw
+-#define       readl   readl
+-#define readq readq
+-#define writeb        writeb
+-#define writew        writew
+-#define writel        writel
+-#define writeq        writeq
++/* readb can never be const, so use __fswab instead of le*_to_cpu */
++#define readb(addr) __raw_readb(addr)
++#define readw(addr) le16_to_cpu(__raw_readw(addr))
++#define readl(addr) le32_to_cpu(__raw_readl(addr))
++#define readq(addr) le64_to_cpu(__raw_readq(addr))
++#define writeb(b, addr) __raw_writeb(b, addr)
++#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
++#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
++#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+ #define readb_relaxed(addr) readb(addr)
+ #define readw_relaxed(addr) readw(addr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/include/asm/irq.h linux-2.6.29-rc3.owrt/arch/parisc/include/asm/irq.h
+--- linux-2.6.29.owrt/arch/parisc/include/asm/irq.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/include/asm/irq.h        2009-05-10 23:48:28.000000000 +0200
+@@ -49,7 +49,7 @@
+ extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
+ extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
+-extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest);
++extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+ /* soft power switch support (power.c) */
+ extern struct tasklet_struct power_tasklet;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/include/asm/uaccess.h linux-2.6.29-rc3.owrt/arch/parisc/include/asm/uaccess.h
+--- linux-2.6.29.owrt/arch/parisc/include/asm/uaccess.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/include/asm/uaccess.h    2009-05-10 23:48:28.000000000 +0200
+@@ -241,7 +241,6 @@
+ #define __copy_to_user_inatomic __copy_to_user
+ #define __copy_from_user_inatomic __copy_from_user
+-struct pt_regs;
+ int fixup_exception(struct pt_regs *regs);
+ #endif /* __PARISC_UACCESS_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/kernel/cache.c linux-2.6.29-rc3.owrt/arch/parisc/kernel/cache.c
+--- linux-2.6.29.owrt/arch/parisc/kernel/cache.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/kernel/cache.c   2009-05-10 23:48:28.000000000 +0200
+@@ -551,7 +551,10 @@
+ {
+       int sr3;
+-      BUG_ON(!vma->vm_mm->context);
++      if (!vma->vm_mm->context) {
++              BUG();
++              return;
++      }
+       sr3 = mfsp(3);
+       if (vma->vm_mm->context == sr3) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/kernel/entry.S linux-2.6.29-rc3.owrt/arch/parisc/kernel/entry.S
+--- linux-2.6.29.owrt/arch/parisc/kernel/entry.S       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/kernel/entry.S   2009-05-10 23:48:28.000000000 +0200
+@@ -368,7 +368,7 @@
+        * abstractions for the macros */
+       .macro          EXTR    reg1,start,length,reg2
+ #ifdef CONFIG_64BIT
+-      extrd,u         \reg1,32+(\start),\length,\reg2
++      extrd,u         \reg1,32+\start,\length,\reg2
+ #else
+       extrw,u         \reg1,\start,\length,\reg2
+ #endif
+@@ -376,7 +376,7 @@
+       .macro          DEP     reg1,start,length,reg2
+ #ifdef CONFIG_64BIT
+-      depd            \reg1,32+(\start),\length,\reg2
++      depd            \reg1,32+\start,\length,\reg2
+ #else
+       depw            \reg1,\start,\length,\reg2
+ #endif
+@@ -384,7 +384,7 @@
+       .macro          DEPI    val,start,length,reg
+ #ifdef CONFIG_64BIT
+-      depdi           \val,32+(\start),\length,\reg
++      depdi           \val,32+\start,\length,\reg
+ #else
+       depwi           \val,\start,\length,\reg
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/kernel/firmware.c linux-2.6.29-rc3.owrt/arch/parisc/kernel/firmware.c
+--- linux-2.6.29.owrt/arch/parisc/kernel/firmware.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/kernel/firmware.c        2009-05-10 23:48:28.000000000 +0200
+@@ -151,7 +151,7 @@
+ }
+ #ifdef CONFIG_64BIT
+-void __cpuinit set_firmware_width_unlocked(void)
++void __init set_firmware_width_unlocked(void)
+ {
+       int ret;
+@@ -168,7 +168,7 @@
+  * This function must be called before any pdc_* function that uses the
+  * convert_to_wide function.
+  */
+-void __cpuinit set_firmware_width(void)
++void __init set_firmware_width(void)
+ {
+       unsigned long flags;
+       spin_lock_irqsave(&pdc_lock, flags);
+@@ -176,11 +176,11 @@
+       spin_unlock_irqrestore(&pdc_lock, flags);
+ }
+ #else
+-void __cpuinit set_firmware_width_unlocked(void) {
++void __init set_firmware_width_unlocked(void) {
+       return;
+ }
+-void __cpuinit set_firmware_width(void) {
++void __init set_firmware_width(void) {
+       return;
+ }
+ #endif /*CONFIG_64BIT*/
+@@ -302,7 +302,7 @@
+       return retval;
+ }
+-int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
++int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+ {
+       int ret;
+@@ -323,7 +323,7 @@
+  * This PDC call returns the presence and status of all the coprocessors
+  * attached to the processor.
+  */
+-int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
++int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+ {
+       int ret;
+       unsigned long flags;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/kernel/irq.c linux-2.6.29-rc3.owrt/arch/parisc/kernel/irq.c
+--- linux-2.6.29.owrt/arch/parisc/kernel/irq.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/kernel/irq.c     2009-05-10 23:48:28.000000000 +0200
+@@ -112,7 +112,7 @@
+ }
+ #ifdef CONFIG_SMP
+-int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
++int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+ {
+       int cpu_dest;
+@@ -120,25 +120,23 @@
+       if (CHECK_IRQ_PER_CPU(irq)) {
+               /* Bad linux design decision.  The mask has already
+                * been set; we must reset it */
+-              cpumask_setall(&irq_desc[irq].affinity);
++              irq_desc[irq].affinity = CPU_MASK_ALL;
+               return -EINVAL;
+       }
+       /* whatever mask they set, we just allow one CPU */
+       cpu_dest = first_cpu(*dest);
++      *dest = cpumask_of_cpu(cpu_dest);
+-      return cpu_dest;
++      return 0;
+ }
+ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
+ {
+-      int cpu_dest;
+-
+-      cpu_dest = cpu_check_affinity(irq, dest);
+-      if (cpu_dest < 0)
++      if (cpu_check_affinity(irq, dest))
+               return;
+-      cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest));
++      irq_desc[irq].affinity = *dest;
+ }
+ #endif
+@@ -297,7 +295,7 @@
+ unsigned long txn_affinity_addr(unsigned int irq, int cpu)
+ {
+ #ifdef CONFIG_SMP
+-      cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
++      irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ #endif
+       return per_cpu(cpu_data, cpu).txn_addr;
+@@ -354,7 +352,7 @@
+       irq = eirr_to_irq(eirr_val);
+ #ifdef CONFIG_SMP
+-      cpumask_copy(&dest, &irq_desc[irq].affinity);
++      dest = irq_desc[irq].affinity;
+       if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
+           !cpu_isset(smp_processor_id(), dest)) {
+               int cpu = first_cpu(dest);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/kernel/pci-dma.c linux-2.6.29-rc3.owrt/arch/parisc/kernel/pci-dma.c
+--- linux-2.6.29.owrt/arch/parisc/kernel/pci-dma.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/kernel/pci-dma.c 2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+ ** PARISC 1.1 Dynamic DMA mapping support.
+ ** This implementation is for PA-RISC platforms that do not support
+ ** I/O TLBs (aka DMA address translation hardware).
+-** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions.
++** See Documentation/DMA-mapping.txt for interface definitions.
+ **
+ **      (c) Copyright 1999,2000 Hewlett-Packard Company
+ **      (c) Copyright 2000 Grant Grundler
+@@ -447,7 +447,10 @@
+ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
+ {
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE) {
++              printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
++              BUG();
++      }
+       flush_kernel_dcache_range((unsigned long) addr, size);
+       return virt_to_phys(addr);
+@@ -455,7 +458,10 @@
+ static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
+ {
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE) {
++              printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
++              BUG();
++      }
+       if (direction == DMA_TO_DEVICE)
+           return;
+@@ -474,7 +480,8 @@
+ {
+       int i;
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE)
++          BUG();
+       for (i = 0; i < nents; i++, sglist++ ) {
+               unsigned long vaddr = sg_virt_addr(sglist);
+@@ -489,7 +496,8 @@
+ {
+       int i;
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE)
++          BUG();
+       if (direction == DMA_TO_DEVICE)
+           return;
+@@ -503,14 +511,16 @@
+ static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
+ {
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE)
++          BUG();
+       flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
+ }
+ static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
+ {
+-      BUG_ON(direction == DMA_NONE);
++      if (direction == DMA_NONE)
++          BUG();
+       flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/parisc/mm/init.c linux-2.6.29-rc3.owrt/arch/parisc/mm/init.c
+--- linux-2.6.29.owrt/arch/parisc/mm/init.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/parisc/mm/init.c        2009-05-10 23:48:28.000000000 +0200
+@@ -304,8 +304,10 @@
+        */
+       max_low_pfn = max_pfn;
+-      /* bootmap sizing messed up? */
+-      BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
++      if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) {
++              printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n");
++              BUG();
++      }
+       /* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/boot/dts/mpc8313erdb.dts linux-2.6.29-rc3.owrt/arch/powerpc/boot/dts/mpc8313erdb.dts
+--- linux-2.6.29.owrt/arch/powerpc/boot/dts/mpc8313erdb.dts    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/boot/dts/mpc8313erdb.dts        2009-05-10 23:48:28.000000000 +0200
+@@ -191,8 +191,7 @@
+                       interrupts = <37 0x8 36 0x8 35 0x8>;
+                       interrupt-parent = <&ipic>;
+                       tbi-handle = < &tbi0 >;
+-                      /* Vitesse 7385 isn't on the MDIO bus */
+-                      fixed-link = <1 1 1000 0 0>;
++                      phy-handle = < &phy1 >;
+                       fsl,magic-packet;
+                       mdio@24520 {
+@@ -200,6 +199,12 @@
+                               #size-cells = <0>;
+                               compatible = "fsl,gianfar-mdio";
+                               reg = <0x24520 0x20>;
++                              phy1: ethernet-phy@1 {
++                                      interrupt-parent = <&ipic>;
++                                      interrupts = <19 0x8>;
++                                      reg = <0x1>;
++                                      device_type = "ethernet-phy";
++                              };
+                               phy4: ethernet-phy@4 {
+                                       interrupt-parent = <&ipic>;
+                                       interrupts = <20 0x8>;
+@@ -214,8 +219,6 @@
+               };
+               enet1: ethernet@25000 {
+-                      #address-cells = <1>;
+-                      #size-cells = <1>;
+                       cell-index = <1>;
+                       device_type = "network";
+                       model = "eTSEC";
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/40x/virtex_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/40x/virtex_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/40x/virtex_defconfig        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/40x/virtex_defconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -686,7 +686,7 @@
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
+ # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/44x/virtex5_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/44x/virtex5_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/44x/virtex5_defconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/44x/virtex5_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -691,7 +691,7 @@
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ # CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
+ # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/52xx/cm5200_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/cm5200_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/52xx/cm5200_defconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/cm5200_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:41:58 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:12:40 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -71,23 +71,14 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -119,6 +110,7 @@
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+@@ -129,11 +121,13 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ # CONFIG_MODULES is not set
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -149,6 +143,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
+ # CONFIG_FREEZER is not set
+ #
+@@ -187,8 +182,9 @@
+ # CONFIG_TAU is not set
+ # CONFIG_FSL_ULI1575 is not set
+ CONFIG_PPC_BESTCOMM=y
++# CONFIG_PPC_BESTCOMM_ATA is not set
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+ #
+ # Kernel options
+@@ -215,7 +211,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -227,14 +222,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -275,7 +268,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -332,7 +324,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -345,7 +336,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -437,12 +427,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -530,9 +514,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -558,10 +539,6 @@
+ # CONFIG_IWLWIFI_LEDS is not set
+ #
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+-
+-#
+ # USB Network Adapters
+ #
+ # CONFIG_USB_CATC is not set
+@@ -611,10 +588,8 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE=y
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+@@ -654,6 +629,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -698,12 +675,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -761,7 +736,6 @@
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_C67X00_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+@@ -786,17 +760,18 @@
+ # CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=y
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+@@ -842,10 +817,6 @@
+ # CONFIG_USB_ISIGHTFW is not set
+ # CONFIG_USB_VST is not set
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+@@ -855,6 +826,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -875,7 +847,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -912,7 +883,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -932,7 +906,6 @@
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ CONFIG_CRAMFS=y
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1029,7 +1002,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1081,7 +1053,6 @@
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -1090,8 +1061,6 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1100,13 +1069,11 @@
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+ # CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+@@ -1133,15 +1100,11 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/52xx/lite5200b_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/lite5200b_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/52xx/lite5200b_defconfig    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/lite5200b_defconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:41:14 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:10:16 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -72,23 +72,14 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ # CONFIG_FAIR_GROUP_SCHED is not set
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -121,6 +112,7 @@
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+@@ -131,6 +123,7 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -138,9 +131,11 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -156,6 +151,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
+ CONFIG_FREEZER=y
+ #
+@@ -196,7 +192,7 @@
+ CONFIG_PPC_BESTCOMM=y
+ CONFIG_PPC_BESTCOMM_ATA=y
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++CONFIG_PPC_BESTCOMM_GEN_BD=y
+ #
+ # Kernel options
+@@ -224,7 +220,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -236,14 +231,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -271,7 +264,6 @@
+ # CONFIG_PCI_MSI is not set
+ CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+ # CONFIG_HAS_RAPIDIO is not set
+@@ -294,7 +286,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -351,7 +342,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -364,7 +354,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -407,19 +396,13 @@
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+ # CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_HP_ILO is not set
+ # CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_AT24 is not set
+-# CONFIG_EEPROM_LEGACY is not set
+-# CONFIG_EEPROM_93CX6 is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -462,7 +445,6 @@
+ # CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_CXGB3_ISCSI is not set
+ # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+ # CONFIG_SCSI_3W_9XXX is not set
+ # CONFIG_SCSI_ACARD is not set
+@@ -479,8 +461,6 @@
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+ # CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_EATA is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+@@ -600,9 +580,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -649,7 +626,6 @@
+ # CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+-CONFIG_CHELSIO_T3_DEPENDS=y
+ # CONFIG_CHELSIO_T3 is not set
+ # CONFIG_ENIC is not set
+ # CONFIG_IXGBE is not set
+@@ -672,10 +648,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_FDDI is not set
+ # CONFIG_HIPPI is not set
+@@ -723,10 +695,8 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+@@ -792,6 +762,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -824,12 +796,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -876,13 +846,9 @@
+ #
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_UWB is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+@@ -894,6 +860,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -914,7 +881,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -948,7 +914,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -957,7 +926,6 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -999,7 +967,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1049,7 +1016,6 @@
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -1058,8 +1024,6 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1068,13 +1032,11 @@
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+ # CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+@@ -1101,15 +1063,11 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/52xx/motionpro_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/motionpro_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/52xx/motionpro_defconfig    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/motionpro_defconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:42:29 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:11:02 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -71,23 +71,14 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -119,6 +110,7 @@
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+@@ -129,11 +121,13 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ # CONFIG_MODULES is not set
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -149,6 +143,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
+ # CONFIG_FREEZER is not set
+ #
+@@ -187,9 +182,9 @@
+ # CONFIG_TAU is not set
+ # CONFIG_FSL_ULI1575 is not set
+ CONFIG_PPC_BESTCOMM=y
+-CONFIG_PPC_BESTCOMM_ATA=y
++# CONFIG_PPC_BESTCOMM_ATA is not set
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+ #
+ # Kernel options
+@@ -216,7 +211,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -228,14 +222,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -276,7 +268,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -333,7 +324,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -346,7 +336,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -438,12 +427,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -464,16 +447,10 @@
+ # CONFIG_ATA_OVER_ETH is not set
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_AT24 is not set
+-CONFIG_EEPROM_LEGACY=y
+-# CONFIG_EEPROM_93CX6 is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -515,7 +492,6 @@
+ # CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_LIBFC is not set
+ # CONFIG_SCSI_DEBUG is not set
+ # CONFIG_SCSI_DH is not set
+ CONFIG_ATA=y
+@@ -549,9 +525,6 @@
+ CONFIG_BROADCOM_PHY=y
+ CONFIG_ICPLUS_PHY=y
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ CONFIG_MDIO_BITBANG=y
+ CONFIG_NET_ETHERNET=y
+@@ -575,10 +548,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -621,10 +590,8 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE=y
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+@@ -662,6 +629,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++CONFIG_EEPROM_LEGACY=y
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -690,7 +659,6 @@
+ # CONFIG_SENSORS_ADT7462 is not set
+ # CONFIG_SENSORS_ADT7470 is not set
+ # CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ADT7475 is not set
+ # CONFIG_SENSORS_ATXP1 is not set
+ # CONFIG_SENSORS_DS1621 is not set
+ # CONFIG_SENSORS_F71805F is not set
+@@ -710,7 +678,6 @@
+ # CONFIG_SENSORS_LM90 is not set
+ # CONFIG_SENSORS_LM92 is not set
+ # CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_LTC4245 is not set
+ # CONFIG_SENSORS_MAX1619 is not set
+ # CONFIG_SENSORS_MAX6650 is not set
+ # CONFIG_SENSORS_PC87360 is not set
+@@ -754,12 +721,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -870,6 +835,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -890,7 +856,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -927,7 +892,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -947,7 +915,6 @@
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ CONFIG_CRAMFS=y
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1044,7 +1011,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1096,7 +1062,6 @@
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -1105,8 +1070,6 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1115,13 +1078,11 @@
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+ # CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+@@ -1148,15 +1109,11 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/52xx/pcm030_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/pcm030_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/52xx/pcm030_defconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/pcm030_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:41:33 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:13:16 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -72,24 +72,15 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -121,6 +112,7 @@
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ # CONFIG_KPROBES is not set
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+@@ -132,6 +124,7 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -139,9 +132,11 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -157,6 +152,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ CONFIG_DEFAULT_NOOP=y
+ CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_CLASSIC_RCU=y
+ # CONFIG_FREEZER is not set
+ #
+@@ -195,9 +191,9 @@
+ # CONFIG_TAU is not set
+ # CONFIG_FSL_ULI1575 is not set
+ CONFIG_PPC_BESTCOMM=y
+-CONFIG_PPC_BESTCOMM_ATA=m
++CONFIG_PPC_BESTCOMM_ATA=y
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++CONFIG_PPC_BESTCOMM_GEN_BD=y
+ #
+ # Kernel options
+@@ -216,6 +212,7 @@
+ # CONFIG_PREEMPT_NONE is not set
+ # CONFIG_PREEMPT_VOLUNTARY is not set
+ CONFIG_PREEMPT=y
++# CONFIG_PREEMPT_RCU is not set
+ CONFIG_BINFMT_ELF=y
+ # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+ # CONFIG_HAVE_AOUT is not set
+@@ -225,7 +222,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -237,14 +233,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -267,7 +261,6 @@
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ # CONFIG_PCI_MSI is not set
+ CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_STUB is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+ # CONFIG_HAS_RAPIDIO is not set
+@@ -290,7 +283,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -341,7 +333,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -354,7 +345,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -375,7 +365,6 @@
+ # CONFIG_MTD_DEBUG is not set
+ # CONFIG_MTD_CONCAT is not set
+ CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ # CONFIG_MTD_OF_PARTS is not set
+@@ -424,7 +413,9 @@
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-# CONFIG_MTD_PHYSMAP_COMPAT is not set
++CONFIG_MTD_PHYSMAP_START=0x0
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+ # CONFIG_MTD_PHYSMAP_OF is not set
+ # CONFIG_MTD_INTEL_VR_NOR is not set
+ # CONFIG_MTD_PLATRAM is not set
+@@ -448,12 +439,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -602,9 +587,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -639,10 +621,6 @@
+ # CONFIG_IWLWIFI_LEDS is not set
+ #
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+-
+-#
+ # USB Network Adapters
+ #
+ # CONFIG_USB_CATC is not set
+@@ -697,9 +675,7 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ # CONFIG_LEGACY_PTYS is not set
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
+ # CONFIG_NVRAM is not set
+@@ -764,6 +740,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++CONFIG_EEPROM_LEGACY=m
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -796,12 +774,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -861,7 +837,6 @@
+ #
+ # CONFIG_USB_C67X00_HCD is not set
+ # CONFIG_USB_EHCI_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=m
+@@ -889,17 +864,18 @@
+ # CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=m
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+@@ -945,10 +921,6 @@
+ # CONFIG_USB_ISIGHTFW is not set
+ # CONFIG_USB_VST is not set
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_UWB is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+@@ -1011,6 +983,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -1031,7 +1004,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_INOTIFY is not set
+ # CONFIG_QUOTA is not set
+@@ -1067,7 +1039,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -1087,7 +1062,6 @@
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1167,7 +1141,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1200,8 +1173,6 @@
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1209,7 +1180,6 @@
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_IRQSTACKS is not set
+ # CONFIG_BOOTX_TEXT is not set
+ # CONFIG_PPC_EARLY_DEBUG is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/52xx/tqm5200_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/tqm5200_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/52xx/tqm5200_defconfig      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/52xx/tqm5200_defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:42:58 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:09:30 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -71,23 +71,14 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -119,6 +110,7 @@
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+@@ -129,6 +121,7 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -136,9 +129,11 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ CONFIG_MODVERSIONS=y
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -154,6 +149,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
+ # CONFIG_FREEZER is not set
+ #
+@@ -192,9 +188,9 @@
+ # CONFIG_TAU is not set
+ # CONFIG_FSL_ULI1575 is not set
+ CONFIG_PPC_BESTCOMM=y
+-CONFIG_PPC_BESTCOMM_ATA=y
++# CONFIG_PPC_BESTCOMM_ATA is not set
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+ #
+ # Kernel options
+@@ -221,7 +217,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -233,14 +228,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -281,7 +274,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -338,7 +330,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -351,7 +342,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -374,7 +364,6 @@
+ # CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_CONCAT=y
+ CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ # CONFIG_MTD_OF_PARTS is not set
+@@ -444,12 +433,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -513,7 +496,6 @@
+ # CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_LIBFC is not set
+ # CONFIG_SCSI_DEBUG is not set
+ # CONFIG_SCSI_DH is not set
+ CONFIG_ATA=y
+@@ -548,9 +530,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -576,10 +555,6 @@
+ # CONFIG_IWLWIFI_LEDS is not set
+ #
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+-
+-#
+ # USB Network Adapters
+ #
+ # CONFIG_USB_CATC is not set
+@@ -629,10 +604,8 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE=y
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+@@ -672,6 +645,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -700,7 +675,6 @@
+ # CONFIG_SENSORS_ADT7462 is not set
+ # CONFIG_SENSORS_ADT7470 is not set
+ # CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ADT7475 is not set
+ # CONFIG_SENSORS_ATXP1 is not set
+ # CONFIG_SENSORS_DS1621 is not set
+ # CONFIG_SENSORS_F71805F is not set
+@@ -720,7 +694,6 @@
+ # CONFIG_SENSORS_LM90 is not set
+ # CONFIG_SENSORS_LM92 is not set
+ # CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_LTC4245 is not set
+ # CONFIG_SENSORS_MAX1619 is not set
+ # CONFIG_SENSORS_MAX6650 is not set
+ # CONFIG_SENSORS_PC87360 is not set
+@@ -769,12 +742,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -832,7 +803,6 @@
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_C67X00_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+@@ -857,17 +827,18 @@
+ # CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=y
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+@@ -913,10 +884,6 @@
+ # CONFIG_USB_ISIGHTFW is not set
+ # CONFIG_USB_VST is not set
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+@@ -980,6 +947,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -1000,7 +968,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -1037,7 +1004,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -1057,7 +1027,6 @@
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ CONFIG_CRAMFS=y
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1154,7 +1123,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1206,7 +1174,6 @@
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -1215,8 +1182,6 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1225,13 +1190,11 @@
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+ # CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+@@ -1258,15 +1221,11 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -651,7 +651,7 @@
+ # CONFIG_NATIONAL_PHY is not set
+ # CONFIG_STE10XP is not set
+ # CONFIG_LSI_ET1011C_PHY is not set
+-CONFIG_FIXED_PHY=y
++# CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/linkstation_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/linkstation_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/linkstation_defconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/linkstation_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc6
+-# Fri Mar  6 00:07:38 2009
++# Linux kernel version: 2.6.29-rc2
++# Mon Jan 26 15:35:29 2009
+ #
+ # CONFIG_PPC64 is not set
+@@ -71,15 +71,6 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+@@ -97,7 +88,6 @@
+ # CONFIG_IPC_NS is not set
+ # CONFIG_USER_NS is not set
+ # CONFIG_PID_NS is not set
+-# CONFIG_NET_NS is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+@@ -163,6 +153,11 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_FREEZER is not set
+ #
+@@ -299,6 +294,7 @@
+ #
+ # Networking options
+ #
++# CONFIG_NET_NS is not set
+ CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+@@ -512,8 +508,8 @@
+ CONFIG_MTD_PARTITIONS=y
+ # CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_OF_PARTS is not set
+ # CONFIG_MTD_AR7_PARTS is not set
+ #
+@@ -591,6 +587,7 @@
+ # LPDDR flash memory drivers
+ #
+ # CONFIG_MTD_LPDDR is not set
++# CONFIG_MTD_QINFO_PROBE is not set
+ #
+ # UBI - Unsorted block images
+@@ -620,19 +617,13 @@
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+ # CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_HP_ILO is not set
+ # CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_AT24 is not set
+-CONFIG_EEPROM_LEGACY=m
+-# CONFIG_EEPROM_93CX6 is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -848,7 +839,6 @@
+ # CONFIG_QLA3XXX is not set
+ # CONFIG_ATL1 is not set
+ # CONFIG_ATL1E is not set
+-# CONFIG_ATL1C is not set
+ # CONFIG_JME is not set
+ CONFIG_NETDEV_10000=y
+ # CONFIG_CHELSIO_T1 is not set
+@@ -1047,6 +1037,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++CONFIG_EEPROM_LEGACY=m
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/mpc5200_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/mpc5200_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/mpc5200_defconfig   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/mpc5200_defconfig       2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Mon Jan 26 21:40:44 2009
++# Linux kernel version: 2.6.28-rc4
++# Thu Nov 13 02:09:07 2008
+ #
+ # CONFIG_PPC64 is not set
+@@ -43,7 +43,7 @@
+ CONFIG_PPC=y
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -72,19 +72,10 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_GROUP_SCHED is not set
+ # CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -117,6 +108,7 @@
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+@@ -127,6 +119,7 @@
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -134,9 +127,11 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ # CONFIG_BLK_DEV_BSG is not set
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+@@ -152,6 +147,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
+ CONFIG_FREEZER=y
+ #
+@@ -196,7 +192,7 @@
+ CONFIG_PPC_BESTCOMM=y
+ CONFIG_PPC_BESTCOMM_ATA=y
+ CONFIG_PPC_BESTCOMM_FEC=y
+-# CONFIG_SIMPLE_GPIO is not set
++CONFIG_PPC_BESTCOMM_GEN_BD=y
+ #
+ # Kernel options
+@@ -224,7 +220,6 @@
+ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ # CONFIG_KEXEC is not set
+-# CONFIG_CRASH_DUMP is not set
+ CONFIG_ARCH_FLATMEM_ENABLE=y
+ CONFIG_ARCH_POPULATES_NODE_MAP=y
+ CONFIG_SELECT_MEMORY_MODEL=y
+@@ -236,14 +231,12 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++# CONFIG_RESOURCES_64BIT is not set
+ # CONFIG_PHYS_ADDR_T_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+ CONFIG_VIRT_TO_BUS=y
+ CONFIG_UNEVICTABLE_LRU=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+-# CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_PROC_DEVICETREE=y
+ # CONFIG_CMDLINE_BOOL is not set
+@@ -271,7 +264,6 @@
+ # CONFIG_PCI_MSI is not set
+ CONFIG_PCI_LEGACY=y
+ # CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCI_STUB is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+ # CONFIG_HAS_RAPIDIO is not set
+@@ -294,7 +286,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -351,7 +342,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -364,7 +354,6 @@
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+ # CONFIG_WIRELESS is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -387,7 +376,6 @@
+ # CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_CONCAT=y
+ CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ # CONFIG_MTD_OF_PARTS is not set
+@@ -459,12 +447,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -492,19 +474,13 @@
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+ # CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_HP_ILO is not set
+ # CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_AT24 is not set
+-# CONFIG_EEPROM_LEGACY is not set
+-# CONFIG_EEPROM_93CX6 is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -563,8 +539,6 @@
+ # CONFIG_MEGARAID_SAS is not set
+ # CONFIG_SCSI_HPTIOP is not set
+ # CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_LIBFC is not set
+-# CONFIG_FCOE is not set
+ # CONFIG_SCSI_DMX3191D is not set
+ # CONFIG_SCSI_EATA is not set
+ # CONFIG_SCSI_FUTURE_DOMAIN is not set
+@@ -685,9 +659,6 @@
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
+ # CONFIG_REALTEK_PHY is not set
+-# CONFIG_NATIONAL_PHY is not set
+-# CONFIG_STE10XP is not set
+-# CONFIG_LSI_ET1011C_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+@@ -722,10 +693,6 @@
+ # CONFIG_IWLWIFI_LEDS is not set
+ #
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+-
+-#
+ # USB Network Adapters
+ #
+ # CONFIG_USB_CATC is not set
+@@ -807,11 +774,9 @@
+ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+ # CONFIG_SERIAL_JSM is not set
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+ # CONFIG_HVC_RTAS is not set
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+@@ -879,6 +844,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -907,7 +874,6 @@
+ # CONFIG_SENSORS_ADT7462 is not set
+ # CONFIG_SENSORS_ADT7470 is not set
+ # CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ADT7475 is not set
+ # CONFIG_SENSORS_ATXP1 is not set
+ # CONFIG_SENSORS_DS1621 is not set
+ # CONFIG_SENSORS_I5K_AMB is not set
+@@ -928,7 +894,6 @@
+ # CONFIG_SENSORS_LM90 is not set
+ # CONFIG_SENSORS_LM92 is not set
+ # CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_LTC4245 is not set
+ # CONFIG_SENSORS_MAX1619 is not set
+ # CONFIG_SENSORS_MAX6650 is not set
+ # CONFIG_SENSORS_PC87360 is not set
+@@ -988,12 +953,10 @@
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+-# CONFIG_TWL4030_CORE is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -1088,7 +1051,7 @@
+ # CONFIG_LCD_ILI9320 is not set
+ # CONFIG_LCD_PLATFORM is not set
+ CONFIG_BACKLIGHT_CLASS_DEVICE=y
+-CONFIG_BACKLIGHT_GENERIC=y
++# CONFIG_BACKLIGHT_CORGI is not set
+ #
+ # Display device support
+@@ -1130,22 +1093,21 @@
+ CONFIG_HID_A4TECH=y
+ # CONFIG_HID_APPLE is not set
+ CONFIG_HID_BELKIN=y
++CONFIG_HID_BRIGHT=y
+ CONFIG_HID_CHERRY=y
+ # CONFIG_HID_CHICONY is not set
+ CONFIG_HID_CYPRESS=y
++CONFIG_HID_DELL=y
+ CONFIG_HID_EZKEY=y
+ # CONFIG_HID_GYRATION is not set
+ # CONFIG_HID_LOGITECH is not set
+ # CONFIG_HID_MICROSOFT is not set
+ # CONFIG_HID_MONTEREY is not set
+-# CONFIG_HID_NTRIG is not set
+ # CONFIG_HID_PANTHERLORD is not set
+ # CONFIG_HID_PETALYNX is not set
+ # CONFIG_HID_SAMSUNG is not set
+ # CONFIG_HID_SONY is not set
+ # CONFIG_HID_SUNPLUS is not set
+-# CONFIG_GREENASIA_FF is not set
+-# CONFIG_HID_TOPSEED is not set
+ # CONFIG_THRUSTMASTER_FF is not set
+ # CONFIG_ZEROPLUS_FF is not set
+ CONFIG_USB_SUPPORT=y
+@@ -1175,7 +1137,6 @@
+ #
+ # CONFIG_USB_C67X00_HCD is not set
+ # CONFIG_USB_EHCI_HCD is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+@@ -1203,17 +1164,18 @@
+ # CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=y
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+@@ -1260,10 +1222,6 @@
+ # CONFIG_USB_ISIGHTFW is not set
+ # CONFIG_USB_VST is not set
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_UWB is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+@@ -1285,6 +1243,7 @@
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -1305,7 +1264,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -1342,7 +1300,10 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -1362,7 +1323,6 @@
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ CONFIG_CRAMFS=y
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1443,7 +1403,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_T10DIF is not set
+@@ -1495,7 +1454,6 @@
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -1504,8 +1462,6 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_HAVE_FUNCTION_TRACER=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+ #
+ # Tracers
+@@ -1514,13 +1470,11 @@
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+ # CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ # CONFIG_DEBUG_STACKOVERFLOW is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+@@ -1547,15 +1501,11 @@
+ #
+ # CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+ CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ # CONFIG_CRYPTO_GF128MUL is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/ps3_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/ps3_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/ps3_defconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/ps3_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc8
+-# Fri Mar 13 09:28:45 2009
++# Linux kernel version: 2.6.27-rc3
++# Wed Aug 20 08:16:53 2008
+ #
+ CONFIG_PPC64=y
+@@ -16,14 +16,13 @@
+ CONFIG_ALTIVEC=y
+ # CONFIG_VSX is not set
+ CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_64=y
+ CONFIG_PPC_MM_SLICES=y
+ CONFIG_VIRT_CPU_ACCOUNTING=y
+ CONFIG_SMP=y
+ CONFIG_NR_CPUS=2
+ CONFIG_64BIT=y
+ CONFIG_WORD_SIZE=64
+-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
++CONFIG_PPC_MERGE=y
+ CONFIG_MMU=y
+ CONFIG_GENERIC_CMOS_UPDATE=y
+ CONFIG_GENERIC_TIME=y
+@@ -47,7 +46,7 @@
+ CONFIG_EARLY_PRINTK=y
+ CONFIG_COMPAT=y
+ CONFIG_SYSVIPC_COMPAT=y
+-CONFIG_SCHED_OMIT_FRAME_POINTER=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+ CONFIG_PPC_OF=y
+ CONFIG_OF=y
+@@ -75,19 +74,10 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=17
+-# CONFIG_GROUP_SCHED is not set
+ # CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -96,13 +86,11 @@
+ # CONFIG_IPC_NS is not set
+ # CONFIG_USER_NS is not set
+ # CONFIG_PID_NS is not set
+-# CONFIG_NET_NS is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EMBEDDED=y
++# CONFIG_EMBEDDED is not set
+ CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ CONFIG_KALLSYMS_ALL=y
+@@ -111,36 +99,37 @@
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+ CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_AIO=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_COMPAT_BRK is not set
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+ CONFIG_PROFILING=y
+-CONFIG_TRACEPOINTS=y
+-CONFIG_MARKERS=y
++# CONFIG_MARKERS is not set
+ CONFIG_OPROFILE=m
+ CONFIG_HAVE_OPROFILE=y
+ # CONFIG_KPROBES is not set
+ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+-CONFIG_HAVE_SYSCALL_WRAPPERS=y
+ CONFIG_HAVE_IOREMAP_PROT=y
+ CONFIG_HAVE_KPROBES=y
+ CONFIG_HAVE_KRETPROBES=y
+ CONFIG_HAVE_ARCH_TRACEHOOK=y
+ CONFIG_HAVE_DMA_ATTRS=y
+ CONFIG_USE_GENERIC_SMP_HELPERS=y
++# CONFIG_HAVE_CLK is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -148,6 +137,7 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
+ CONFIG_STOP_MACHINE=y
+ CONFIG_BLOCK=y
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+@@ -167,7 +157,7 @@
+ # CONFIG_DEFAULT_CFQ is not set
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+-# CONFIG_FREEZER is not set
++CONFIG_CLASSIC_RCU=y
+ #
+ # Platform support
+@@ -193,20 +183,18 @@
+ CONFIG_PS3_DISK=y
+ CONFIG_PS3_ROM=y
+ CONFIG_PS3_FLASH=y
+-CONFIG_PS3_VRAM=m
++CONFIG_OPROFILE_PS3=y
+ CONFIG_PS3_LPM=m
+ CONFIG_PPC_CELL=y
+ # CONFIG_PPC_CELL_NATIVE is not set
+ # CONFIG_PPC_IBM_CELL_BLADE is not set
+ # CONFIG_PPC_CELLEB is not set
+-# CONFIG_PPC_CELL_QPACE is not set
+ #
+ # Cell Broadband Engine options
+ #
+ CONFIG_SPU_FS=y
+ CONFIG_SPU_FS_64K_LS=y
+-# CONFIG_SPU_TRACE is not set
+ CONFIG_SPU_BASE=y
+ # CONFIG_PQ2ADS is not set
+ # CONFIG_IPIC is not set
+@@ -222,7 +210,6 @@
+ # CONFIG_GENERIC_IOMAP is not set
+ # CONFIG_CPU_FREQ is not set
+ # CONFIG_FSL_ULI1575 is not set
+-# CONFIG_SIMPLE_GPIO is not set
+ #
+ # Kernel options
+@@ -242,8 +229,6 @@
+ # CONFIG_PREEMPT is not set
+ CONFIG_BINFMT_ELF=y
+ CONFIG_COMPAT_BINFMT_ELF=y
+-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+-# CONFIG_HAVE_AOUT is not set
+ CONFIG_BINFMT_MISC=y
+ CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
+ # CONFIG_IOMMU_VMERGE is not set
+@@ -266,6 +251,7 @@
+ CONFIG_SPARSEMEM_MANUAL=y
+ CONFIG_SPARSEMEM=y
+ CONFIG_HAVE_MEMORY_PRESENT=y
++# CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPARSEMEM_EXTREME=y
+ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+ # CONFIG_SPARSEMEM_VMEMMAP is not set
+@@ -275,14 +261,11 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
+-CONFIG_PHYS_ADDR_T_64BIT=y
++CONFIG_RESOURCES_64BIT=y
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+-CONFIG_UNEVICTABLE_LRU=y
+ CONFIG_ARCH_MEMORY_PROBE=y
+ CONFIG_PPC_HAS_HASH_64K=y
+-CONFIG_PPC_4K_PAGES=y
+-# CONFIG_PPC_16K_PAGES is not set
+ # CONFIG_PPC_64K_PAGES is not set
+ CONFIG_FORCE_MAX_ZONEORDER=13
+ CONFIG_SCHED_SMT=y
+@@ -316,7 +299,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+@@ -379,7 +361,6 @@
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+-# CONFIG_NET_DSA is not set
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
+ # CONFIG_LLC2 is not set
+@@ -390,7 +371,6 @@
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -412,37 +392,39 @@
+ #
+ # Bluetooth device drivers
+ #
+-CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIUSB=m
++CONFIG_BT_HCIUSB_SCO=y
+ # CONFIG_BT_HCIUART is not set
+ # CONFIG_BT_HCIBCM203X is not set
+ # CONFIG_BT_HCIBPA10X is not set
+ # CONFIG_BT_HCIBFUSB is not set
+ # CONFIG_BT_HCIVHCI is not set
+ # CONFIG_AF_RXRPC is not set
+-# CONFIG_PHONET is not set
+-CONFIG_WIRELESS=y
++
++#
++# Wireless
++#
+ CONFIG_CFG80211=m
+-# CONFIG_CFG80211_REG_DEBUG is not set
+ CONFIG_NL80211=y
+-# CONFIG_WIRELESS_OLD_REGULATORY is not set
+ CONFIG_WIRELESS_EXT=y
+ # CONFIG_WIRELESS_EXT_SYSFS is not set
+-# CONFIG_LIB80211 is not set
+ CONFIG_MAC80211=m
+ #
+ # Rate control algorithm selection
+ #
+ CONFIG_MAC80211_RC_PID=y
+-# CONFIG_MAC80211_RC_MINSTREL is not set
+ CONFIG_MAC80211_RC_DEFAULT_PID=y
+-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+ CONFIG_MAC80211_RC_DEFAULT="pid"
+ # CONFIG_MAC80211_MESH is not set
+ # CONFIG_MAC80211_LEDS is not set
+ # CONFIG_MAC80211_DEBUGFS is not set
+ # CONFIG_MAC80211_DEBUG_MENU is not set
+-# CONFIG_WIMAX is not set
++CONFIG_IEEE80211=m
++# CONFIG_IEEE80211_DEBUG is not set
++CONFIG_IEEE80211_CRYPT_WEP=m
++CONFIG_IEEE80211_CRYPT_CCMP=m
++CONFIG_IEEE80211_CRYPT_TKIP=m
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -468,7 +450,6 @@
+ CONFIG_MTD_DEBUG_VERBOSE=0
+ # CONFIG_MTD_CONCAT is not set
+ # CONFIG_MTD_PARTITIONS is not set
+-# CONFIG_MTD_TESTS is not set
+ #
+ # User Modules And Translation Layers
+@@ -513,6 +494,7 @@
+ #
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
++CONFIG_MTD_PS3VRAM=y
+ # CONFIG_MTD_MTDRAM is not set
+ # CONFIG_MTD_BLOCK2MTD is not set
+@@ -526,11 +508,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -551,13 +528,8 @@
+ # CONFIG_ATA_OVER_ETH is not set
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-# CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+ # CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+@@ -603,17 +575,7 @@
+ # CONFIG_SCSI_LOWLEVEL is not set
+ # CONFIG_SCSI_DH is not set
+ # CONFIG_ATA is not set
+-CONFIG_MD=y
+-# CONFIG_BLK_DEV_MD is not set
+-CONFIG_BLK_DEV_DM=m
+-# CONFIG_DM_DEBUG is not set
+-# CONFIG_DM_CRYPT is not set
+-# CONFIG_DM_SNAPSHOT is not set
+-# CONFIG_DM_MIRROR is not set
+-# CONFIG_DM_ZERO is not set
+-# CONFIG_DM_MULTIPATH is not set
+-# CONFIG_DM_DELAY is not set
+-# CONFIG_DM_UEVENT is not set
++# CONFIG_MD is not set
+ # CONFIG_MACINTOSH_DRIVERS is not set
+ CONFIG_NETDEVICES=y
+ # CONFIG_DUMMY is not set
+@@ -629,9 +591,6 @@
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+ # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+ # CONFIG_B44 is not set
+ CONFIG_NETDEV_1000=y
+ CONFIG_GELIC_NET=y
+@@ -645,7 +604,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ CONFIG_WLAN_80211=y
+ # CONFIG_LIBERTAS is not set
+-# CONFIG_LIBERTAS_THINFIRM is not set
+ # CONFIG_USB_ZD1201 is not set
+ # CONFIG_USB_NET_RNDIS_WLAN is not set
+ # CONFIG_RTL8187 is not set
+@@ -657,11 +615,13 @@
+ # CONFIG_B43LEGACY is not set
+ CONFIG_ZD1211RW=m
+ # CONFIG_ZD1211RW_DEBUG is not set
+-# CONFIG_RT2X00 is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
++CONFIG_RT2X00=m
++CONFIG_RT2X00_LIB=m
++CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB_FIRMWARE=y
++# CONFIG_RT2500USB is not set
++CONFIG_RT73USB=m
++# CONFIG_RT2X00_DEBUG is not set
+ #
+ # USB Network Adapters
+@@ -674,7 +634,6 @@
+ CONFIG_USB_NET_AX8817X=m
+ # CONFIG_USB_NET_CDCETHER is not set
+ # CONFIG_USB_NET_DM9601 is not set
+-# CONFIG_USB_NET_SMSC95XX is not set
+ # CONFIG_USB_NET_GL620A is not set
+ # CONFIG_USB_NET_NET1080 is not set
+ # CONFIG_USB_NET_PLUSB is not set
+@@ -705,7 +664,7 @@
+ # Input device support
+ #
+ CONFIG_INPUT=y
+-CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_FF_MEMLESS is not set
+ # CONFIG_INPUT_POLLDEV is not set
+ #
+@@ -776,10 +735,8 @@
+ # Non-8250 serial port support
+ #
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=16
+-# CONFIG_HVC_UDBG is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_R3964 is not set
+@@ -796,11 +753,11 @@
+ # CONFIG_THERMAL is not set
+ # CONFIG_THERMAL_HWMON is not set
+ # CONFIG_WATCHDOG is not set
+-CONFIG_SSB_POSSIBLE=y
+ #
+ # Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
+ # CONFIG_SSB is not set
+ #
+@@ -810,7 +767,6 @@
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
+ # CONFIG_MFD_TMIO is not set
+-# CONFIG_REGULATOR is not set
+ #
+ # Multimedia devices
+@@ -836,7 +792,6 @@
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ # CONFIG_FB_CFB_FILLRECT is not set
+ # CONFIG_FB_CFB_COPYAREA is not set
+ # CONFIG_FB_CFB_IMAGEBLIT is not set
+@@ -862,8 +817,6 @@
+ CONFIG_FB_PS3=y
+ CONFIG_FB_PS3_DEFAULT_SIZE_M=9
+ # CONFIG_FB_VIRTUAL is not set
+-# CONFIG_FB_METRONOME is not set
+-# CONFIG_FB_MB862XX is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ #
+@@ -888,7 +841,6 @@
+ # CONFIG_LOGO_LINUX_VGA16 is not set
+ CONFIG_LOGO_LINUX_CLUT224=y
+ CONFIG_SOUND=m
+-# CONFIG_SOUND_OSS_CORE is not set
+ CONFIG_SND=m
+ CONFIG_SND_TIMER=m
+ CONFIG_SND_PCM=m
+@@ -897,7 +849,6 @@
+ # CONFIG_SND_SEQUENCER is not set
+ # CONFIG_SND_MIXER_OSS is not set
+ # CONFIG_SND_PCM_OSS is not set
+-# CONFIG_SND_HRTIMER is not set
+ # CONFIG_SND_DYNAMIC_MINORS is not set
+ CONFIG_SND_SUPPORT_OLD_API=y
+ CONFIG_SND_VERBOSE_PROCFS=y
+@@ -922,40 +873,15 @@
+ # USB Input Devices
+ #
+ CONFIG_USB_HID=m
+-# CONFIG_HID_PID is not set
+-CONFIG_USB_HIDDEV=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ #
+ # USB HID Boot Protocol drivers
+ #
+ # CONFIG_USB_KBD is not set
+ # CONFIG_USB_MOUSE is not set
+-
+-#
+-# Special HID drivers
+-#
+-# CONFIG_HID_COMPAT is not set
+-# CONFIG_HID_A4TECH is not set
+-# CONFIG_HID_APPLE is not set
+-# CONFIG_HID_BELKIN is not set
+-# CONFIG_HID_CHERRY is not set
+-# CONFIG_HID_CHICONY is not set
+-# CONFIG_HID_CYPRESS is not set
+-# CONFIG_HID_EZKEY is not set
+-# CONFIG_HID_GYRATION is not set
+-# CONFIG_HID_LOGITECH is not set
+-# CONFIG_HID_MICROSOFT is not set
+-# CONFIG_HID_MONTEREY is not set
+-# CONFIG_HID_NTRIG is not set
+-# CONFIG_HID_PANTHERLORD is not set
+-# CONFIG_HID_PETALYNX is not set
+-# CONFIG_HID_SAMSUNG is not set
+-# CONFIG_HID_SONY is not set
+-# CONFIG_HID_SUNPLUS is not set
+-# CONFIG_GREENASIA_FF is not set
+-# CONFIG_HID_TOPSEED is not set
+-# CONFIG_THRUSTMASTER_FF is not set
+-# CONFIG_ZEROPLUS_FF is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+@@ -972,11 +898,7 @@
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ CONFIG_USB_SUSPEND=y
+ # CONFIG_USB_OTG is not set
+-# CONFIG_USB_OTG_WHITELIST is not set
+-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+-CONFIG_USB_MON=m
+-# CONFIG_USB_WUSB is not set
+-# CONFIG_USB_WUSB_CBAF is not set
++CONFIG_USB_MON=y
+ #
+ # USB Host Controller Drivers
+@@ -987,7 +909,6 @@
+ # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+ # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+-# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
+ CONFIG_USB_OHCI_HCD=m
+@@ -997,7 +918,6 @@
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+ # CONFIG_USB_R8A66597_HCD is not set
+-# CONFIG_USB_HWA_HCD is not set
+ #
+ # Enable Host or Gadget support to see Inventra options
+@@ -1009,20 +929,20 @@
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+ # CONFIG_USB_WDM is not set
+-# CONFIG_USB_TMC is not set
+ #
+-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ #
+-# see USB_STORAGE Help for more information
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=m
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+@@ -1030,6 +950,7 @@
+ # CONFIG_USB_STORAGE_ALAUDA is not set
+ # CONFIG_USB_STORAGE_ONETOUCH is not set
+ # CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_SIERRA is not set
+ # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+ # CONFIG_USB_LIBUSUAL is not set
+@@ -1050,7 +971,6 @@
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
+ # CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_SEVSEG is not set
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
+@@ -1068,12 +988,7 @@
+ # CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+ # CONFIG_USB_ISIGHTFW is not set
+-# CONFIG_USB_VST is not set
+ # CONFIG_USB_GADGET is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+@@ -1099,15 +1014,12 @@
+ # Platform RTC drivers
+ #
+ # CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1286 is not set
+ # CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
+ # CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T35 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_BQ4802 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+ #
+@@ -1116,7 +1028,6 @@
+ CONFIG_RTC_DRV_PPC=m
+ # CONFIG_DMADEVICES is not set
+ # CONFIG_UIO is not set
+-# CONFIG_STAGING is not set
+ #
+ # File systems
+@@ -1124,35 +1035,26 @@
+ CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ CONFIG_EXT3_FS_XATTR=y
+ # CONFIG_EXT3_FS_POSIX_ACL is not set
+ # CONFIG_EXT3_FS_SECURITY is not set
+-CONFIG_EXT4_FS=y
+-# CONFIG_EXT4DEV_COMPAT is not set
+-CONFIG_EXT4_FS_XATTR=y
+-# CONFIG_EXT4_FS_POSIX_ACL is not set
+-# CONFIG_EXT4_FS_SECURITY is not set
+-CONFIG_JBD=m
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+-CONFIG_JBD2=y
+-# CONFIG_JBD2_DEBUG is not set
+ CONFIG_FS_MBCACHE=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+-CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ CONFIG_QUOTA=y
+ # CONFIG_QUOTA_NETLINK_INTERFACE is not set
+ CONFIG_PRINT_QUOTA_WARNING=y
+-CONFIG_QUOTA_TREE=y
+ # CONFIG_QFMT_V1 is not set
+ CONFIG_QFMT_V2=y
+ CONFIG_QUOTACTL=y
+@@ -1185,14 +1087,16 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_KCORE=y
+ CONFIG_PROC_SYSCTL=y
+-CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ CONFIG_HUGETLBFS=y
+ CONFIG_HUGETLB_PAGE=y
+ # CONFIG_CONFIGFS_FS is not set
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -1202,7 +1106,6 @@
+ # CONFIG_EFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -1223,7 +1126,6 @@
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_REGISTER_V4 is not set
+ CONFIG_RPCSEC_GSS_KRB5=y
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+@@ -1288,9 +1190,9 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ CONFIG_CRC_CCITT=m
+-CONFIG_CRC16=y
++# CONFIG_CRC16 is not set
+ CONFIG_CRC_T10DIF=y
+ CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
+@@ -1348,44 +1250,27 @@
+ CONFIG_DEBUG_MEMORY_INIT=y
+ CONFIG_DEBUG_LIST=y
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
++CONFIG_FRAME_POINTER=y
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+ # CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_SYSCTL_SYSCALL_CHECK=y
+-CONFIG_NOP_TRACER=y
+-CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_HAVE_FTRACE=y
+ CONFIG_HAVE_DYNAMIC_FTRACE=y
+-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+-CONFIG_RING_BUFFER=y
+-CONFIG_TRACING=y
+-
+-#
+-# Tracers
+-#
+-# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_FTRACE is not set
+ # CONFIG_IRQSOFF_TRACER is not set
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+-# CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_STACK_TRACER is not set
+-# CONFIG_FTRACE_STARTUP_TEST is not set
+-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
+-CONFIG_PRINT_STACK_DEPTH=64
+ CONFIG_DEBUG_STACKOVERFLOW=y
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_PAGEALLOC is not set
+ # CONFIG_CODE_PATCHING_SELFTEST is not set
+ # CONFIG_FTR_FIXUP_SELFTEST is not set
+-# CONFIG_MSI_BITMAP_SELFTEST is not set
+ # CONFIG_XMON is not set
+ CONFIG_IRQSTACKS=y
+ # CONFIG_VIRQ_DEBUG is not set
+@@ -1397,26 +1282,16 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITYFS is not set
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ #
+ # Crypto core or helper
+ #
+-# CONFIG_CRYPTO_FIPS is not set
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+ CONFIG_CRYPTO_AEAD=m
+-CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+-CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG=m
+-CONFIG_CRYPTO_RNG2=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ CONFIG_CRYPTO_GF128MUL=m
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+@@ -1488,11 +1363,6 @@
+ #
+ # CONFIG_CRYPTO_DEFLATE is not set
+ CONFIG_CRYPTO_LZO=m
+-
+-#
+-# Random Number Generation
+-#
+-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+ CONFIG_CRYPTO_HW=y
+ # CONFIG_PPC_CLOCK is not set
+ # CONFIG_VIRTUALIZATION is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/configs/storcenter_defconfig linux-2.6.29-rc3.owrt/arch/powerpc/configs/storcenter_defconfig
+--- linux-2.6.29.owrt/arch/powerpc/configs/storcenter_defconfig        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/configs/storcenter_defconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc6
+-# Fri Mar  6 00:09:08 2009
++# Linux kernel version: 2.6.29-rc2
++# Mon Jan 26 15:35:46 2009
+ #
+ # CONFIG_PPC64 is not set
+@@ -71,15 +71,6 @@
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_GROUP_SCHED=y
+@@ -153,6 +144,11 @@
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
+ # CONFIG_FREEZER is not set
+ #
+@@ -381,8 +377,8 @@
+ CONFIG_MTD_PARTITIONS=y
+ # CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_OF_PARTS is not set
+ # CONFIG_MTD_AR7_PARTS is not set
+ #
+@@ -456,6 +452,7 @@
+ # LPDDR flash memory drivers
+ #
+ # CONFIG_MTD_LPDDR is not set
++# CONFIG_MTD_QINFO_PROBE is not set
+ #
+ # UBI - Unsorted block images
+@@ -481,19 +478,13 @@
+ # CONFIG_BLK_DEV_HD is not set
+ CONFIG_MISC_DEVICES=y
+ # CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_SGI_IOC4 is not set
+ # CONFIG_TIFM_CORE is not set
+ # CONFIG_ICS932S401 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_HP_ILO is not set
+ # CONFIG_C2PORT is not set
+-
+-#
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_AT24 is not set
+-# CONFIG_EEPROM_LEGACY is not set
+-# CONFIG_EEPROM_93CX6 is not set
+ CONFIG_HAVE_IDE=y
+ CONFIG_IDE=y
+@@ -686,7 +677,6 @@
+ # CONFIG_QLA3XXX is not set
+ # CONFIG_ATL1 is not set
+ # CONFIG_ATL1E is not set
+-# CONFIG_ATL1C is not set
+ # CONFIG_JME is not set
+ # CONFIG_NETDEV_10000 is not set
+ # CONFIG_TR is not set
+@@ -828,6 +818,8 @@
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_LEGACY is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+@@ -1167,7 +1159,6 @@
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ # CONFIG_NETWORK_FILESYSTEMS is not set
+-CONFIG_EXPORTFS=m
+ #
+ # Partition Types
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/compat.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/compat.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/compat.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/compat.h    2009-05-10 23:48:28.000000000 +0200
+@@ -210,10 +210,5 @@
+       compat_ulong_t __unused6;
+ };
+-static inline int is_compat_task(void)
+-{
+-      return test_thread_flag(TIF_32BIT);
+-}
+-
+ #endif /* __KERNEL__ */
+ #endif /* _ASM_POWERPC_COMPAT_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/cputable.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/cputable.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/cputable.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/cputable.h  2009-05-10 23:48:28.000000000 +0200
+@@ -241,11 +241,9 @@
+ /* We need to mark all pages as being coherent if we're SMP or we have a
+  * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+  * require it for PCI "streaming/prefetch" to work properly.
+- * This is also required by 52xx family.
+  */
+ #if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+-      || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) \
+-      || defined(CONFIG_PPC_MPC52xx)
++      || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+ #define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+ #else
+ #define CPU_FTR_COMMON                  0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-4k.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-4k.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-4k.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-4k.h        2009-05-10 23:48:28.000000000 +0200
+@@ -60,7 +60,7 @@
+ /* It should be preserving the high 48 bits and then specifically */
+ /* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
+ #define _PAGE_CHG_MASK        (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+-                         _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
++                         _PAGE_HPTEFLAGS)
+ /* Bits to mask out from a PMD to get to the PTE page */
+ #define PMD_MASKED_BITS               0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-64k.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-64k.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-64k.h   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-64k.h       2009-05-10 23:48:28.000000000 +0200
+@@ -114,7 +114,7 @@
+  * pgprot changes
+  */
+ #define _PAGE_CHG_MASK        (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+-                         _PAGE_ACCESSED | _PAGE_SPECIAL)
++                         _PAGE_ACCESSED)
+ /* Bits to mask out from a PMD to get to the PTE page */
+ #define PMD_MASKED_BITS               0x1ff
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-ppc32.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-ppc32.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/pgtable-ppc32.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/pgtable-ppc32.h     2009-05-10 23:48:28.000000000 +0200
+@@ -429,8 +429,7 @@
+ #define PMD_PAGE_SIZE(pmd)    bad_call_to_PMD_PAGE_SIZE()
+ #endif
+-#define _PAGE_CHG_MASK        (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+-                       _PAGE_SPECIAL)
++#define _PAGE_CHG_MASK        (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+ #define PAGE_PROT_BITS        (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/include/asm/seccomp.h linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/seccomp.h
+--- linux-2.6.29.owrt/arch/powerpc/include/asm/seccomp.h       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/include/asm/seccomp.h   2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,10 @@
+ #ifndef _ASM_POWERPC_SECCOMP_H
+ #define _ASM_POWERPC_SECCOMP_H
++#ifdef __KERNEL__
++#include <linux/thread_info.h>
++#endif
++
+ #include <linux/unistd.h>
+ #define __NR_seccomp_read __NR_read
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/kernel/align.c linux-2.6.29-rc3.owrt/arch/powerpc/kernel/align.c
+--- linux-2.6.29.owrt/arch/powerpc/kernel/align.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/kernel/align.c  2009-05-10 23:48:28.000000000 +0200
+@@ -367,24 +367,27 @@
+ static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
+                          unsigned int flags)
+ {
+-      char *ptr0 = (char *) &current->thread.TS_FPR(reg);
+-      char *ptr1 = (char *) &current->thread.TS_FPR(reg+1);
+-      int i, ret, sw = 0;
++      char *ptr = (char *) &current->thread.TS_FPR(reg);
++      int i, ret;
+       if (!(flags & F))
+               return 0;
+       if (reg & 1)
+               return 0;       /* invalid form: FRS/FRT must be even */
+-      if (flags & SW)
+-              sw = 7;
+-      ret = 0;
+-      for (i = 0; i < 8; ++i) {
+-              if (!(flags & ST)) {
+-                      ret |= __get_user(ptr0[i^sw], addr + i);
+-                      ret |= __get_user(ptr1[i^sw], addr + i + 8);
+-              } else {
+-                      ret |= __put_user(ptr0[i^sw], addr + i);
+-                      ret |= __put_user(ptr1[i^sw], addr + i + 8);
++      if (!(flags & SW)) {
++              /* not byte-swapped - easy */
++              if (!(flags & ST))
++                      ret = __copy_from_user(ptr, addr, 16);
++              else
++                      ret = __copy_to_user(addr, ptr, 16);
++      } else {
++              /* each FPR value is byte-swapped separately */
++              ret = 0;
++              for (i = 0; i < 16; ++i) {
++                      if (!(flags & ST))
++                              ret |= __get_user(ptr[i^7], addr + i);
++                      else
++                              ret |= __put_user(ptr[i^7], addr + i);
+               }
+       }
+       if (ret)
+@@ -643,16 +646,11 @@
+                      unsigned int areg, struct pt_regs *regs,
+                      unsigned int flags, unsigned int length)
+ {
+-      char *ptr;
++      char *ptr = (char *) &current->thread.TS_FPR(reg);
+       int ret = 0;
+       flush_vsx_to_thread(current);
+-      if (reg < 32)
+-              ptr = (char *) &current->thread.TS_FPR(reg);
+-      else
+-              ptr = (char *) &current->thread.vr[reg - 32];
+-
+       if (flags & ST)
+               ret = __copy_to_user(addr, ptr, length);
+         else {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/kernel/ftrace.c linux-2.6.29-rc3.owrt/arch/powerpc/kernel/ftrace.c
+--- linux-2.6.29.owrt/arch/powerpc/kernel/ftrace.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/kernel/ftrace.c 2009-05-10 23:48:28.000000000 +0200
+@@ -195,9 +195,8 @@
+               return -EINVAL;
+       }
+-      /* The bottom half is signed extended */
+-      offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
+-              (int)((short)jmp[1]);
++      offset = (unsigned)((unsigned short)jmp[0]) << 16 |
++              (unsigned)((unsigned short)jmp[1]);
+       DEBUGP(" %x ", offset);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/kernel/head_32.S linux-2.6.29-rc3.owrt/arch/powerpc/kernel/head_32.S
+--- linux-2.6.29.owrt/arch/powerpc/kernel/head_32.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/kernel/head_32.S        2009-05-10 23:48:28.000000000 +0200
+@@ -511,11 +511,8 @@
+       and     r1,r1,r2                /* writable if _RW and _DIRTY */
+       rlwimi  r3,r3,32-1,30,30        /* _PAGE_USER -> PP msb */
+       rlwimi  r3,r3,32-1,31,31        /* _PAGE_USER -> PP lsb */
+-      ori     r1,r1,0xe04             /* clear out reserved bits */
++      ori     r1,r1,0xe14             /* clear out reserved bits and M */
+       andc    r1,r3,r1                /* PP = user? (rw&dirty? 2: 3): 0 */
+-BEGIN_FTR_SECTION
+-      rlwinm  r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+-END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+       mtspr   SPRN_RPA,r1
+       mfspr   r3,SPRN_IMISS
+       tlbli   r3
+@@ -588,11 +585,8 @@
+       and     r1,r1,r2                /* writable if _RW and _DIRTY */
+       rlwimi  r3,r3,32-1,30,30        /* _PAGE_USER -> PP msb */
+       rlwimi  r3,r3,32-1,31,31        /* _PAGE_USER -> PP lsb */
+-      ori     r1,r1,0xe04             /* clear out reserved bits */
++      ori     r1,r1,0xe14             /* clear out reserved bits and M */
+       andc    r1,r3,r1                /* PP = user? (rw&dirty? 2: 3): 0 */
+-BEGIN_FTR_SECTION
+-      rlwinm  r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+-END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+       mtspr   SPRN_RPA,r1
+       mfspr   r3,SPRN_DMISS
+       tlbld   r3
+@@ -659,11 +653,8 @@
+       stw     r3,0(r2)                /* update PTE (accessed/dirty bits) */
+       /* Convert linux-style PTE to low word of PPC-style PTE */
+       rlwimi  r3,r3,32-1,30,30        /* _PAGE_USER -> PP msb */
+-      li      r1,0xe05                /* clear out reserved bits & PP lsb */
++      li      r1,0xe15                /* clear out reserved bits and M */
+       andc    r1,r3,r1                /* PP = user? 2: 0 */
+-BEGIN_FTR_SECTION
+-      rlwinm  r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+-END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+       mtspr   SPRN_RPA,r1
+       mfspr   r3,SPRN_DMISS
+       tlbld   r3
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/kernel/pci-common.c linux-2.6.29-rc3.owrt/arch/powerpc/kernel/pci-common.c
+--- linux-2.6.29.owrt/arch/powerpc/kernel/pci-common.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/kernel/pci-common.c     2009-05-10 23:48:28.000000000 +0200
+@@ -16,6 +16,8 @@
+  * 2 of the License, or (at your option) any later version.
+  */
++#define DEBUG
++
+ #include <linux/kernel.h>
+ #include <linux/pci.h>
+ #include <linux/string.h>
+@@ -256,8 +258,7 @@
+       } else {
+               pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+                        oirq.size, oirq.specifier[0], oirq.specifier[1],
+-                       oirq.controller ? oirq.controller->full_name :
+-                       "<default>");
++                  oirq.controller->full_name);
+               virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+                                            oirq.size);
+@@ -561,21 +562,8 @@
+                (unsigned long long)(offset + size - 1));
+       if (mmap_state == pci_mmap_mem) {
+-              /* Hack alert !
+-               *
+-               * Because X is lame and can fail starting if it gets an error trying
+-               * to mmap legacy_mem (instead of just moving on without legacy memory
+-               * access) we fake it here by giving it anonymous memory, effectively
+-               * behaving just like /dev/zero
+-               */
+-              if ((offset + size) > hose->isa_mem_size) {
+-                      printk(KERN_DEBUG
+-                             "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
+-                             current->comm, current->pid, pci_domain_nr(bus), bus->number);
+-                      if (vma->vm_flags & VM_SHARED)
+-                              return shmem_zero_setup(vma);
+-                      return 0;
+-              }
++              if ((offset + size) > hose->isa_mem_size)
++                      return -ENXIO;
+               offset += hose->isa_mem_phys;
+       } else {
+               unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/kvm/powerpc.c linux-2.6.29-rc3.owrt/arch/powerpc/kvm/powerpc.c
+--- linux-2.6.29.owrt/arch/powerpc/kvm/powerpc.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/kvm/powerpc.c   2009-05-10 23:48:28.000000000 +0200
+@@ -125,10 +125,6 @@
+       }
+ }
+-void kvm_arch_sync_events(struct kvm *kvm)
+-{
+-}
+-
+ void kvm_arch_destroy_vm(struct kvm *kvm)
+ {
+       kvmppc_free_vcpus(kvm);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/lib/copyuser_64.S linux-2.6.29-rc3.owrt/arch/powerpc/lib/copyuser_64.S
+--- linux-2.6.29.owrt/arch/powerpc/lib/copyuser_64.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/lib/copyuser_64.S       2009-05-10 23:48:28.000000000 +0200
+@@ -62,19 +62,18 @@
+ 72:   std     r8,8(r3)
+       beq+    3f
+       addi    r3,r3,16
++23:   ld      r9,8(r4)
+ .Ldo_tail:
+       bf      cr7*4+1,1f
+-23:   lwz     r9,8(r4)
+-      addi    r4,r4,4
++      rotldi  r9,r9,32
+ 73:   stw     r9,0(r3)
+       addi    r3,r3,4
+ 1:    bf      cr7*4+2,2f
+-44:   lhz     r9,8(r4)
+-      addi    r4,r4,2
++      rotldi  r9,r9,16
+ 74:   sth     r9,0(r3)
+       addi    r3,r3,2
+ 2:    bf      cr7*4+3,3f
+-45:   lbz     r9,8(r4)
++      rotldi  r9,r9,8
+ 75:   stb     r9,0(r3)
+ 3:    li      r3,0
+       blr
+@@ -142,24 +141,11 @@
+ 6:    cmpwi   cr1,r5,8
+       addi    r3,r3,32
+       sld     r9,r9,r10
+-      ble     cr1,7f
++      ble     cr1,.Ldo_tail
+ 34:   ld      r0,8(r4)
+       srd     r7,r0,r11
+       or      r9,r7,r9
+-7:
+-      bf      cr7*4+1,1f
+-      rotldi  r9,r9,32
+-94:   stw     r9,0(r3)
+-      addi    r3,r3,4
+-1:    bf      cr7*4+2,2f
+-      rotldi  r9,r9,16
+-95:   sth     r9,0(r3)
+-      addi    r3,r3,2
+-2:    bf      cr7*4+3,3f
+-      rotldi  r9,r9,8
+-96:   stb     r9,0(r3)
+-3:    li      r3,0
+-      blr
++      b       .Ldo_tail
+ .Ldst_unaligned:
+       PPC_MTOCRF      0x01,r6         /* put #bytes to 8B bdry into cr7 */
+@@ -232,6 +218,7 @@
+ 121:
+ 132:
+       addi    r3,r3,8
++123:
+ 134:
+ 135:
+ 138:
+@@ -239,9 +226,6 @@
+ 140:
+ 141:
+ 142:
+-123:
+-144:
+-145:
+ /*
+  * here we have had a fault on a load and r3 points to the first
+@@ -325,9 +309,6 @@
+ 187:
+ 188:
+ 189:  
+-194:
+-195:
+-196:
+ 1:
+       ld      r6,-24(r1)
+       ld      r5,-8(r1)
+@@ -348,9 +329,7 @@
+       .llong  72b,172b
+       .llong  23b,123b
+       .llong  73b,173b
+-      .llong  44b,144b
+       .llong  74b,174b
+-      .llong  45b,145b
+       .llong  75b,175b
+       .llong  24b,124b
+       .llong  25b,125b
+@@ -368,9 +347,6 @@
+       .llong  79b,179b
+       .llong  80b,180b
+       .llong  34b,134b
+-      .llong  94b,194b
+-      .llong  95b,195b
+-      .llong  96b,196b
+       .llong  35b,135b
+       .llong  81b,181b
+       .llong  36b,136b
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/lib/memcpy_64.S linux-2.6.29-rc3.owrt/arch/powerpc/lib/memcpy_64.S
+--- linux-2.6.29.owrt/arch/powerpc/lib/memcpy_64.S     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/lib/memcpy_64.S 2009-05-10 23:48:28.000000000 +0200
+@@ -53,19 +53,18 @@
+ 3:    std     r8,8(r3)
+       beq     3f
+       addi    r3,r3,16
++      ld      r9,8(r4)
+ .Ldo_tail:
+       bf      cr7*4+1,1f
+-      lwz     r9,8(r4)
+-      addi    r4,r4,4
++      rotldi  r9,r9,32
+       stw     r9,0(r3)
+       addi    r3,r3,4
+ 1:    bf      cr7*4+2,2f
+-      lhz     r9,8(r4)
+-      addi    r4,r4,2
++      rotldi  r9,r9,16
+       sth     r9,0(r3)
+       addi    r3,r3,2
+ 2:    bf      cr7*4+3,3f
+-      lbz     r9,8(r4)
++      rotldi  r9,r9,8
+       stb     r9,0(r3)
+ 3:    ld      r3,48(r1)       /* return dest pointer */
+       blr
+@@ -134,24 +133,11 @@
+       cmpwi   cr1,r5,8
+       addi    r3,r3,32
+       sld     r9,r9,r10
+-      ble     cr1,6f
++      ble     cr1,.Ldo_tail
+       ld      r0,8(r4)
+       srd     r7,r0,r11
+       or      r9,r7,r9
+-6:
+-      bf      cr7*4+1,1f
+-      rotldi  r9,r9,32
+-      stw     r9,0(r3)
+-      addi    r3,r3,4
+-1:    bf      cr7*4+2,2f
+-      rotldi  r9,r9,16
+-      sth     r9,0(r3)
+-      addi    r3,r3,2
+-2:    bf      cr7*4+3,3f
+-      rotldi  r9,r9,8
+-      stb     r9,0(r3)
+-3:    ld      r3,48(r1)       /* return dest pointer */
+-      blr
++      b       .Ldo_tail
+ .Ldst_unaligned:
+       PPC_MTOCRF      0x01,r6         # put #bytes to 8B bdry into cr7
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/lib/sstep.c linux-2.6.29-rc3.owrt/arch/powerpc/lib/sstep.c
+--- linux-2.6.29.owrt/arch/powerpc/lib/sstep.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/lib/sstep.c     2009-05-10 23:48:28.000000000 +0200
+@@ -172,8 +172,6 @@
+                       }
+                       break;
+               case 0x378:     /* orx */
+-                      if (instr & 1)
+-                              break;
+                       rs = (instr >> 21) & 0x1f;
+                       rb = (instr >> 11) & 0x1f;
+                       if (rs == rb) {         /* mr */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/mm/fsl_booke_mmu.c linux-2.6.29-rc3.owrt/arch/powerpc/mm/fsl_booke_mmu.c
+--- linux-2.6.29.owrt/arch/powerpc/mm/fsl_booke_mmu.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/mm/fsl_booke_mmu.c      2009-05-10 23:48:28.000000000 +0200
+@@ -73,7 +73,7 @@
+ /*
+  * Return PA for this VA if it is mapped by a CAM, or 0
+  */
+-phys_addr_t v_mapped_by_tlbcam(unsigned long va)
++unsigned long v_mapped_by_tlbcam(unsigned long va)
+ {
+       int b;
+       for (b = 0; b < tlbcam_index; ++b)
+@@ -85,7 +85,7 @@
+ /*
+  * Return VA for a given PA or 0 if not mapped
+  */
+-unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
++unsigned long p_mapped_by_tlbcam(unsigned long pa)
+ {
+       int b;
+       for (b = 0; b < tlbcam_index; ++b)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/mm/hash_low_32.S linux-2.6.29-rc3.owrt/arch/powerpc/mm/hash_low_32.S
+--- linux-2.6.29.owrt/arch/powerpc/mm/hash_low_32.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/mm/hash_low_32.S        2009-05-10 23:48:28.000000000 +0200
+@@ -320,7 +320,7 @@
+       and     r8,r8,r0                /* writable if _RW & _DIRTY */
+       rlwimi  r5,r5,32-1,30,30        /* _PAGE_USER -> PP msb */
+       rlwimi  r5,r5,32-2,31,31        /* _PAGE_USER -> PP lsb */
+-      ori     r8,r8,0xe04             /* clear out reserved bits */
++      ori     r8,r8,0xe14             /* clear out reserved bits and M */
+       andc    r8,r5,r8                /* PP = user? (rw&dirty? 2: 3): 0 */
+ BEGIN_FTR_SECTION
+       rlwinm  r8,r8,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/mm/numa.c linux-2.6.29-rc3.owrt/arch/powerpc/mm/numa.c
+--- linux-2.6.29.owrt/arch/powerpc/mm/numa.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/mm/numa.c       2009-05-10 23:48:28.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/notifier.h>
+ #include <linux/lmb.h>
+ #include <linux/of.h>
+-#include <linux/pfn.h>
+ #include <asm/sparsemem.h>
+ #include <asm/prom.h>
+ #include <asm/system.h>
+@@ -883,7 +882,7 @@
+               unsigned long physbase = lmb.reserved.region[i].base;
+               unsigned long size = lmb.reserved.region[i].size;
+               unsigned long start_pfn = physbase >> PAGE_SHIFT;
+-              unsigned long end_pfn = PFN_UP(physbase + size);
++              unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+               struct node_active_region node_ar;
+               unsigned long node_end_pfn = node->node_start_pfn +
+                                            node->node_spanned_pages;
+@@ -909,7 +908,7 @@
+                        */
+                       if (end_pfn > node_ar.end_pfn)
+                               reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+-                                      - physbase;
++                                      - (start_pfn << PAGE_SHIFT);
+                       /*
+                        * Only worry about *this* node, others may not
+                        * yet have valid NODE_DATA().
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/mm/pgtable_32.c linux-2.6.29-rc3.owrt/arch/powerpc/mm/pgtable_32.c
+--- linux-2.6.29.owrt/arch/powerpc/mm/pgtable_32.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/mm/pgtable_32.c 2009-05-10 23:48:28.000000000 +0200
+@@ -61,8 +61,8 @@
+ #ifdef HAVE_TLBCAM
+ extern unsigned int tlbcam_index;
+-extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
+-extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
++extern unsigned long v_mapped_by_tlbcam(unsigned long va);
++extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
+ #else /* !HAVE_TLBCAM */
+ #define v_mapped_by_tlbcam(x) (0UL)
+ #define p_mapped_by_tlbcam(x) (0UL)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/oprofile/cell/spu_profiler.c linux-2.6.29-rc3.owrt/arch/powerpc/oprofile/cell/spu_profiler.c
+--- linux-2.6.29.owrt/arch/powerpc/oprofile/cell/spu_profiler.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/oprofile/cell/spu_profiler.c    2009-05-10 23:48:28.000000000 +0200
+@@ -16,7 +16,6 @@
+ #include <linux/smp.h>
+ #include <linux/slab.h>
+ #include <asm/cell-pmu.h>
+-#include <asm/time.h>
+ #include "pr_util.h"
+ #define SCALE_SHIFT 14
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/52xx/mpc52xx_pci.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/52xx/mpc52xx_pci.c        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/52xx/mpc52xx_pci.c    2009-05-10 23:48:28.000000000 +0200
+@@ -20,6 +20,14 @@
+ /* ======================================================================== */
++/* PCI windows config                                                       */
++/* ======================================================================== */
++
++#define MPC52xx_PCI_TARGET_IO 0xf0000000
++#define MPC52xx_PCI_TARGET_MEM        0x00000000
++
++
++/* ======================================================================== */
+ /* Structures mapping & Defines for PCI Unit                                */
+ /* ======================================================================== */
+@@ -236,7 +244,7 @@
+ static void __init
+ mpc52xx_pci_setup(struct pci_controller *hose,
+-                  struct mpc52xx_pci __iomem *pci_regs, phys_addr_t pci_phys)
++                  struct mpc52xx_pci __iomem *pci_regs)
+ {
+       struct resource *res;
+       u32 tmp;
+@@ -306,14 +314,10 @@
+       /* Set all the IWCR fields at once; they're in the same reg */
+       out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
+-      /* Map IMMR onto PCI bus */
+-      pci_phys &= 0xfffc0000; /* bar0 has only 14 significant bits */
+-      out_be32(&pci_regs->tbatr0, MPC52xx_PCI_TBATR_ENABLE | pci_phys);
+-      out_be32(&pci_regs->bar0, PCI_BASE_ADDRESS_MEM_PREFETCH | pci_phys);
+-
+-      /* Map memory onto PCI bus */
+-      out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE);
+-      out_be32(&pci_regs->bar1, PCI_BASE_ADDRESS_MEM_PREFETCH);
++      out_be32(&pci_regs->tbatr0,
++              MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
++      out_be32(&pci_regs->tbatr1,
++              MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+       out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
+@@ -410,7 +414,7 @@
+       /* Finish setting up PCI using values obtained by
+        * pci_proces_bridge_OF_ranges */
+-      mpc52xx_pci_setup(hose, pci_regs, rsrc.start);
++      mpc52xx_pci_setup(hose, pci_regs);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c 2009-05-10 23:48:28.000000000 +0200
+@@ -186,7 +186,7 @@
+       iounmap(priv->regs);
+ out_free_bootmem:
+       free_bootmem((unsigned long)priv,
+-                   sizeof(struct pq2ads_pci_pic));
++                   sizeof(sizeof(struct pq2ads_pci_pic)));
+       of_node_put(np);
+ out_unmap_irq:
+       irq_dispose_mapping(irq);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/86xx/gef_sbc610.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/86xx/gef_sbc610.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/86xx/gef_sbc610.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/86xx/gef_sbc610.c     2009-05-10 23:48:28.000000000 +0200
+@@ -142,10 +142,6 @@
+ {
+       unsigned int val;
+-      /* Do not do the fixup on other platforms! */
+-      if (!machine_is(gef_sbc610))
+-              return;
+-
+       printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+       /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/embedded6xx/linkstation.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/embedded6xx/linkstation.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/embedded6xx/linkstation.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/embedded6xx/linkstation.c     2009-05-10 23:48:28.000000000 +0200
+@@ -12,6 +12,7 @@
+ #include <linux/kernel.h>
+ #include <linux/initrd.h>
++#include <linux/mtd/physmap.h>
+ #include <linux/of_platform.h>
+ #include <asm/time.h>
+@@ -21,6 +22,39 @@
+ #include "mpc10x.h"
++static struct mtd_partition linkstation_physmap_partitions[] = {
++      {
++              .name   = "mtd_firmimg",
++              .offset = 0x000000,
++              .size   = 0x300000,
++      },
++      {
++              .name   = "mtd_bootcode",
++              .offset = 0x300000,
++              .size   = 0x070000,
++      },
++      {
++              .name   = "mtd_status",
++              .offset = 0x370000,
++              .size   = 0x010000,
++      },
++      {
++              .name   = "mtd_conf",
++              .offset = 0x380000,
++              .size   = 0x080000,
++      },
++      {
++              .name   = "mtd_allflash",
++              .offset = 0x000000,
++              .size   = 0x400000,
++      },
++      {
++              .name   = "mtd_data",
++              .offset = 0x310000,
++              .size   = 0x0f0000,
++      },
++};
++
+ static __initdata struct of_device_id of_bus_ids[] = {
+       { .type = "soc", },
+       { .compatible = "simple-bus", },
+@@ -65,6 +99,10 @@
+ static void __init linkstation_setup_arch(void)
+ {
+       struct device_node *np;
++#ifdef CONFIG_MTD_PHYSMAP
++      physmap_set_partitions(linkstation_physmap_partitions,
++                             ARRAY_SIZE(linkstation_physmap_partitions));
++#endif
+       /* Lookup PCI host bridges */
+       for_each_compatible_node(np, "pci", "mpc10x-pci")
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/embedded6xx/storcenter.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/embedded6xx/storcenter.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/embedded6xx/storcenter.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/embedded6xx/storcenter.c      2009-05-10 23:48:28.000000000 +0200
+@@ -14,6 +14,7 @@
+ #include <linux/kernel.h>
+ #include <linux/pci.h>
+ #include <linux/initrd.h>
++#include <linux/mtd/physmap.h>
+ #include <linux/of_platform.h>
+ #include <asm/system.h>
+@@ -25,6 +26,32 @@
+ #include "mpc10x.h"
++#ifdef CONFIG_MTD_PHYSMAP
++static struct mtd_partition storcenter_physmap_partitions[] = {
++      {
++              .name   = "kernel",
++              .offset = 0x000000,
++              .size   = 0x170000,
++      },
++      {
++              .name   = "rootfs",
++              .offset = 0x170000,
++              .size   = 0x590000,
++      },
++      {
++              .name   = "uboot",
++              .offset = 0x700000,
++              .size   = 0x040000,
++      },
++      {
++              .name   = "config",
++              .offset = 0x740000,
++              .size   = 0x0c0000,
++      },
++};
++#endif
++
++
+ static __initdata struct of_device_id storcenter_of_bus[] = {
+       { .name = "soc", },
+       {},
+@@ -69,6 +96,11 @@
+ {
+       struct device_node *np;
++#ifdef CONFIG_MTD_PHYSMAP
++      physmap_set_partitions(storcenter_physmap_partitions,
++                             ARRAY_SIZE(storcenter_physmap_partitions));
++#endif
++
+       /* Lookup PCI host bridges */
+       for_each_compatible_node(np, "pci", "mpc10x-pci")
+               storcenter_add_bridge(np);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/ps3/Kconfig linux-2.6.29-rc3.owrt/arch/powerpc/platforms/ps3/Kconfig
+--- linux-2.6.29.owrt/arch/powerpc/platforms/ps3/Kconfig       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/ps3/Kconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -128,13 +128,6 @@
+         be disabled on the kernel command line using "ps3flash=off", to
+         not allocate this fixed buffer.
+-config PS3_VRAM
+-      tristate "PS3 Video RAM Storage Driver"
+-      depends on FB_PS3=y && BLOCK && m
+-      help
+-        This driver allows you to use excess PS3 video RAM as volatile
+-        storage or system swap.
+-
+ config PS3_LPM
+       tristate "PS3 Logical Performance Monitor support"
+       depends on PPC_PS3
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/ps3/mm.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/ps3/mm.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/ps3/mm.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/ps3/mm.c      2009-05-10 23:48:28.000000000 +0200
+@@ -328,7 +328,7 @@
+       return result;
+ }
+-device_initcall(ps3_mm_add_memory);
++core_initcall(ps3_mm_add_memory);
+ /*============================================================================*/
+ /* dma routines                                                               */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/platforms/pseries/hotplug-memory.c linux-2.6.29-rc3.owrt/arch/powerpc/platforms/pseries/hotplug-memory.c
+--- linux-2.6.29.owrt/arch/powerpc/platforms/pseries/hotplug-memory.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/platforms/pseries/hotplug-memory.c      2009-05-10 23:48:28.000000000 +0200
+@@ -14,7 +14,6 @@
+ #include <asm/firmware.h>
+ #include <asm/machdep.h>
+ #include <asm/pSeries_reconfig.h>
+-#include <asm/sparsemem.h>
+ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/sysdev/cpm2_pic.c linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/cpm2_pic.c
+--- linux-2.6.29.owrt/arch/powerpc/sysdev/cpm2_pic.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/cpm2_pic.c       2009-05-10 23:48:28.000000000 +0200
+@@ -165,7 +165,7 @@
+                       edibit = (14 - (src - CPM2_IRQ_EXT1));
+       else
+               if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0)
+-                      edibit = (31 - (CPM2_IRQ_PORTC0 - src));
++                      edibit = (31 - (src - CPM2_IRQ_PORTC15));
+               else
+                       return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/sysdev/ipic.c linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/ipic.c
+--- linux-2.6.29.owrt/arch/powerpc/sysdev/ipic.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/ipic.c   2009-05-10 23:48:28.000000000 +0200
+@@ -890,7 +890,7 @@
+       return irq_linear_revmap(primary_ipic->irqhost, irq);
+ }
+-#ifdef CONFIG_SUSPEND
++#ifdef CONFIG_PM
+ static struct {
+       u32 sicfr;
+       u32 siprr[2];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/powerpc/sysdev/ppc4xx_pci.c linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/ppc4xx_pci.c
+--- linux-2.6.29.owrt/arch/powerpc/sysdev/ppc4xx_pci.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/powerpc/sysdev/ppc4xx_pci.c     2009-05-10 23:48:28.000000000 +0200
+@@ -204,23 +204,6 @@
+ {
+       u32 ma, pcila, pciha;
+-      /* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+-       * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+-       * address are actually hard wired to a value that appears to depend
+-       * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+-       *
+-       * The trick here is we just crop those top bits and ignore them when
+-       * programming the chip. That means the device-tree has to be right
+-       * for the specific part used (we don't print a warning if it's wrong
+-       * but on the other hand, you'll crash quickly enough), but at least
+-       * this code should work whatever the hard coded value is
+-       */
+-      plb_addr &= 0xffffffffull;
+-
+-      /* Note: Due to the above hack, the test below doesn't actually test
+-       * if you address is above 4G, but it tests that address and
+-       * (address + size) are both contained in the same 4G
+-       */
+       if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
+           size < 0x1000 || (plb_addr & (size - 1)) != 0) {
+               printk(KERN_WARNING "%s: Resource out of range\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/crypto/aes_s390.c linux-2.6.29-rc3.owrt/arch/s390/crypto/aes_s390.c
+--- linux-2.6.29.owrt/arch/s390/crypto/aes_s390.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/crypto/aes_s390.c  2009-05-10 23:48:28.000000000 +0200
+@@ -556,7 +556,7 @@
+ module_init(aes_s390_init);
+ module_exit(aes_s390_fini);
+-MODULE_ALIAS("aes-all");
++MODULE_ALIAS("aes");
+ MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
+ MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/defconfig linux-2.6.29-rc3.owrt/arch/s390/defconfig
+--- linux-2.6.29.owrt/arch/s390/defconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/defconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc4
+-# Wed Feb 11 10:07:16 2009
++# Linux kernel version: 2.6.28-rc6
++# Thu Nov 27 11:00:49 2008
+ #
+ CONFIG_SCHED_MC=y
+ CONFIG_MMU=y
+@@ -14,14 +14,12 @@
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+ CONFIG_GENERIC_CLOCKEVENTS=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_NO_IOMEM=y
+ CONFIG_NO_DMA=y
+ CONFIG_GENERIC_LOCKBREAK=y
+ CONFIG_PGSTE=y
+-CONFIG_VIRT_CPU_ACCOUNTING=y
+ CONFIG_S390=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+@@ -41,29 +39,20 @@
+ # CONFIG_TASKSTATS is not set
+ CONFIG_AUDIT=y
+ # CONFIG_AUDITSYSCALL is not set
+-
+-#
+-# RCU Subsystem
+-#
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_TREE_RCU is not set
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_TREE_RCU_TRACE is not set
+-# CONFIG_PREEMPT_RCU_TRACE is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=17
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_CGROUPS=y
+ # CONFIG_CGROUP_DEBUG is not set
+ CONFIG_CGROUP_NS=y
+ # CONFIG_CGROUP_FREEZER is not set
+ # CONFIG_CGROUP_DEVICE is not set
+ # CONFIG_CPUSETS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
+ # CONFIG_CGROUP_CPUACCT is not set
+ # CONFIG_RESOURCE_COUNTERS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+@@ -74,7 +63,6 @@
+ CONFIG_IPC_NS=y
+ # CONFIG_USER_NS is not set
+ # CONFIG_PID_NS is not set
+-# CONFIG_NET_NS is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+@@ -103,17 +91,17 @@
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+ CONFIG_HAVE_OPROFILE=y
+ CONFIG_KPROBES=y
+-CONFIG_HAVE_SYSCALL_WRAPPERS=y
+ CONFIG_KRETPROBES=y
+ CONFIG_HAVE_KPROBES=y
+ CONFIG_HAVE_KRETPROBES=y
+ CONFIG_HAVE_ARCH_TRACEHOOK=y
+-CONFIG_USE_GENERIC_SMP_HELPERS=y
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_FORCE_LOAD is not set
+@@ -121,7 +109,7 @@
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ CONFIG_MODVERSIONS=y
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_INIT_ALL_POSSIBLE=y
++CONFIG_KMOD=y
+ CONFIG_STOP_MACHINE=y
+ CONFIG_BLOCK=y
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+@@ -142,6 +130,7 @@
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="deadline"
+ CONFIG_PREEMPT_NOTIFIERS=y
++CONFIG_CLASSIC_RCU=y
+ # CONFIG_FREEZER is not set
+ #
+@@ -172,7 +161,6 @@
+ CONFIG_MARCH_Z900=y
+ # CONFIG_MARCH_Z990 is not set
+ # CONFIG_MARCH_Z9_109 is not set
+-# CONFIG_MARCH_Z10 is not set
+ CONFIG_PACK_STACK=y
+ # CONFIG_SMALL_STACK is not set
+ CONFIG_CHECK_STACK=y
+@@ -186,6 +174,7 @@
+ # CONFIG_PREEMPT_NONE is not set
+ # CONFIG_PREEMPT_VOLUNTARY is not set
+ CONFIG_PREEMPT=y
++# CONFIG_PREEMPT_RCU is not set
+ CONFIG_ARCH_SPARSEMEM_ENABLE=y
+ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+@@ -206,6 +195,7 @@
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_MIGRATION=y
++CONFIG_RESOURCES_64BIT=y
+ CONFIG_PHYS_ADDR_T_64BIT=y
+ CONFIG_ZONE_DMA_FLAG=1
+ CONFIG_BOUNCE=y
+@@ -217,6 +207,7 @@
+ #
+ CONFIG_MACHCHK_WARNING=y
+ CONFIG_QDIO=y
++# CONFIG_QDIO_DEBUG is not set
+ CONFIG_CHSC_SCH=m
+ #
+@@ -236,13 +227,15 @@
+ # CONFIG_SHARED_KERNEL is not set
+ # CONFIG_CMM is not set
+ # CONFIG_PAGE_STATES is not set
++CONFIG_VIRT_TIMER=y
++CONFIG_VIRT_CPU_ACCOUNTING=y
+ # CONFIG_APPLDATA_BASE is not set
+ CONFIG_HZ_100=y
+ # CONFIG_HZ_250 is not set
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=100
+-CONFIG_SCHED_HRTICK=y
++# CONFIG_SCHED_HRTICK is not set
+ CONFIG_S390_HYPFS_FS=y
+ CONFIG_KEXEC=y
+ # CONFIG_ZFCPDUMP is not set
+@@ -252,7 +245,6 @@
+ #
+ # Networking options
+ #
+-CONFIG_COMPAT_NET_DEV_OPS=y
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -391,7 +383,6 @@
+ CONFIG_NET_SCH_GRED=m
+ CONFIG_NET_SCH_DSMARK=m
+ # CONFIG_NET_SCH_NETEM is not set
+-# CONFIG_NET_SCH_DRR is not set
+ # CONFIG_NET_SCH_INGRESS is not set
+ #
+@@ -409,7 +400,6 @@
+ CONFIG_NET_CLS_RSVP=m
+ CONFIG_NET_CLS_RSVP6=m
+ CONFIG_NET_CLS_FLOW=m
+-# CONFIG_NET_CLS_CGROUP is not set
+ # CONFIG_NET_EMATCH is not set
+ CONFIG_NET_CLS_ACT=y
+ CONFIG_NET_ACT_POLICE=y
+@@ -421,7 +411,6 @@
+ # CONFIG_NET_ACT_SKBEDIT is not set
+ # CONFIG_NET_CLS_IND is not set
+ CONFIG_NET_SCH_FIFO=y
+-# CONFIG_DCB is not set
+ #
+ # Network testing
+@@ -439,7 +428,6 @@
+ # CONFIG_CAN_DEBUG_DEVICES is not set
+ # CONFIG_AF_RXRPC is not set
+ # CONFIG_PHONET is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+ # CONFIG_PCMCIA is not set
+@@ -487,15 +475,11 @@
+ CONFIG_DASD_EER=y
+ CONFIG_VIRTIO_BLK=m
+ CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
+ # CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_C2PORT is not set
+ #
+-# EEPROM support
+-#
+-# CONFIG_EEPROM_93CX6 is not set
+-
+-#
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+@@ -536,7 +520,6 @@
+ # CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_LIBFC is not set
+ # CONFIG_SCSI_DEBUG is not set
+ CONFIG_ZFCP=y
+ CONFIG_SCSI_DH=m
+@@ -583,10 +566,6 @@
+ CONFIG_NETDEV_1000=y
+ CONFIG_NETDEV_10000=y
+ # CONFIG_TR is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ #
+@@ -614,11 +593,9 @@
+ #
+ CONFIG_DEVKMEM=y
+ CONFIG_UNIX98_PTYS=y
+-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+ CONFIG_HVC_DRIVER=y
+-CONFIG_HVC_IUCV=y
+ CONFIG_VIRTIO_CONSOLE=y
+ CONFIG_HW_RANDOM=m
+ CONFIG_HW_RANDOM_VIRTIO=m
+@@ -668,6 +645,7 @@
+ # CONFIG_NEW_LEDS is not set
+ CONFIG_ACCESSIBILITY=y
+ # CONFIG_STAGING is not set
++CONFIG_STAGING_EXCLUDE_BUILD=y
+ #
+ # File systems
+@@ -690,7 +668,6 @@
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -726,7 +703,10 @@
+ # CONFIG_HUGETLBFS is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_CONFIGFS_FS=m
+-CONFIG_MISC_FILESYSTEMS=y
++
++#
++# Miscellaneous filesystems
++#
+ # CONFIG_ADFS_FS is not set
+ # CONFIG_AFFS_FS is not set
+ # CONFIG_HFS_FS is not set
+@@ -735,7 +715,6 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+@@ -829,7 +808,6 @@
+ CONFIG_DEBUG_MEMORY_INIT=y
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-# CONFIG_DEBUG_NOTIFIERS is not set
+ # CONFIG_FRAME_POINTER is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+@@ -840,19 +818,15 @@
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+ CONFIG_SYSCTL_SYSCALL_CHECK=y
+-CONFIG_HAVE_FUNCTION_TRACER=y
+ #
+ # Tracers
+ #
+-# CONFIG_FUNCTION_TRACER is not set
+ # CONFIG_IRQSOFF_TRACER is not set
+ # CONFIG_PREEMPT_TRACER is not set
+ # CONFIG_SCHED_TRACER is not set
+ # CONFIG_CONTEXT_SWITCH_TRACER is not set
+ # CONFIG_BOOT_TRACER is not set
+-# CONFIG_TRACE_BRANCH_PROFILING is not set
+-# CONFIG_STACK_TRACER is not set
+ # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+ CONFIG_SAMPLES=y
+ # CONFIG_SAMPLE_KOBJECT is not set
+@@ -873,17 +847,11 @@
+ #
+ CONFIG_CRYPTO_FIPS=y
+ CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_ALGAPI2=y
+-CONFIG_CRYPTO_AEAD=m
+-CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_BLKCIPHER2=y
+-CONFIG_CRYPTO_HASH=m
+-CONFIG_CRYPTO_HASH2=y
+-CONFIG_CRYPTO_RNG=m
+-CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_RNG=y
+ CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_MANAGER2=y
+ CONFIG_CRYPTO_GF128MUL=m
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+@@ -917,7 +885,7 @@
+ #
+ # Digest
+ #
+-CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_MD4 is not set
+ CONFIG_CRYPTO_MD5=m
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+@@ -974,7 +942,6 @@
+ # Library routines
+ #
+ CONFIG_BITREVERSE=m
+-CONFIG_GENERIC_FIND_LAST_BIT=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ CONFIG_CRC_T10DIF=y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/cputime.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/cputime.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/cputime.h  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/cputime.h      2009-05-10 23:48:28.000000000 +0200
+@@ -145,7 +145,7 @@
+       value->tv_usec = rp.subreg.even / 4096;
+       value->tv_sec = rp.subreg.odd;
+ #else
+-      value->tv_usec = (cputime % 4096000000ULL) / 4096;
++      value->tv_usec = cputime % 4096000000ULL;
+       value->tv_sec = cputime / 4096000000ULL;
+ #endif
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/lowcore.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/lowcore.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/lowcore.h  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/lowcore.h      2009-05-10 23:48:28.000000000 +0200
+@@ -384,8 +384,8 @@
+         __u32        panic_magic;              /* 0xe00 */
+       /* Per cpu primary space access list */
+-      __u8         pad_0xe04[0xe38-0xe04];   /* 0xe04 */
+-      __u64        vdso_per_cpu_data;        /* 0xe38 */
++      __u8         pad_0xe04[0xe3c-0xe04];   /* 0xe04 */
++      __u32        vdso_per_cpu_data;        /* 0xe3c */
+       __u32        paste[16];                /* 0xe40 */
+       __u8         pad13[0x11b8-0xe80];      /* 0xe80 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/mman.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/mman.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/mman.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/mman.h 2009-05-10 23:48:28.000000000 +0200
+@@ -22,9 +22,4 @@
+ #define MCL_CURRENT   1               /* lock all current mappings */
+ #define MCL_FUTURE    2               /* lock all future mappings */
+-#if defined(__KERNEL__) && !defined(__ASSEMBLY__) && defined(CONFIG_64BIT)
+-int s390_mmap_check(unsigned long addr, unsigned long len);
+-#define arch_mmap_check(addr,len,flags)       s390_mmap_check(addr,len)
+-#endif
+-
+ #endif /* __S390_MMAN_H__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/processor.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/processor.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/processor.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/processor.h    2009-05-10 23:48:28.000000000 +0200
+@@ -61,7 +61,7 @@
+ extern int get_cpu_capability(unsigned int *);
+ /*
+- * User space process size: 2GB for 31 bit, 4TB or 8PT for 64 bit.
++ * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+  */
+ #ifndef __s390x__
+@@ -70,7 +70,8 @@
+ #else /* __s390x__ */
+-#define TASK_SIZE_OF(tsk)     ((tsk)->mm->context.asce_limit)
++#define TASK_SIZE_OF(tsk)     (test_tsk_thread_flag(tsk,TIF_31BIT) ? \
++                                      (1UL << 31) : (1UL << 53))
+ #define TASK_UNMAPPED_BASE    (test_thread_flag(TIF_31BIT) ? \
+                                       (1UL << 30) : (1UL << 41))
+ #define TASK_SIZE             TASK_SIZE_OF(current)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/setup.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/setup.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/setup.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/setup.h        2009-05-10 23:48:28.000000000 +0200
+@@ -43,8 +43,6 @@
+ extern struct mem_chunk memory_chunk[];
+ extern unsigned long real_memory_size;
+-extern int memory_end_set;
+-extern unsigned long memory_end;
+ void detect_memory_layout(struct mem_chunk chunk[]);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/include/asm/topology.h linux-2.6.29-rc3.owrt/arch/s390/include/asm/topology.h
+--- linux-2.6.29.owrt/arch/s390/include/asm/topology.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/include/asm/topology.h     2009-05-10 23:48:28.000000000 +0200
+@@ -30,8 +30,6 @@
+ };
+ #endif
+-#define SD_MC_INIT SD_CPU_INIT
+-
+ #include <asm-generic/topology.h>
+ #endif /* _ASM_S390_TOPOLOGY_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/kernel/irq.c linux-2.6.29-rc3.owrt/arch/s390/kernel/irq.c
+--- linux-2.6.29.owrt/arch/s390/kernel/irq.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/kernel/irq.c       2009-05-10 23:48:28.000000000 +0200
+@@ -95,7 +95,6 @@
+       local_irq_restore(flags);
+ }
+-#ifdef CONFIG_PROC_FS
+ void init_irq_proc(void)
+ {
+       struct proc_dir_entry *root_irq_dir;
+@@ -103,4 +102,3 @@
+       root_irq_dir = proc_mkdir("irq", NULL);
+       create_prof_cpu_mask(root_irq_dir);
+ }
+-#endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/kernel/mcount.S linux-2.6.29-rc3.owrt/arch/s390/kernel/mcount.S
+--- linux-2.6.29.owrt/arch/s390/kernel/mcount.S        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/kernel/mcount.S    2009-05-10 23:48:28.000000000 +0200
+@@ -5,8 +5,6 @@
+  *
+  */
+-#include <asm/asm-offsets.h>
+-
+ #ifndef CONFIG_64BIT
+ .globl _mcount
+ _mcount:
+@@ -16,7 +14,7 @@
+       ahi     %r15,-96
+       l       %r3,100(%r15)
+       la      %r2,0(%r14)
+-      st      %r1,__SF_BACKCHAIN(%r15)
++      st      %r1,0(%r15)
+       la      %r3,0(%r3)
+       bras    %r14,0f
+       .long   ftrace_trace_function
+@@ -40,7 +38,7 @@
+       stg     %r14,112(%r15)
+       lgr     %r1,%r15
+       aghi    %r15,-160
+-      stg     %r1,__SF_BACKCHAIN(%r15)
++      stg     %r1,0(%r15)
+       lgr     %r2,%r14
+       lg      %r3,168(%r15)
+       larl    %r14,ftrace_trace_function
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/kernel/setup.c linux-2.6.29-rc3.owrt/arch/s390/kernel/setup.c
+--- linux-2.6.29.owrt/arch/s390/kernel/setup.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/kernel/setup.c     2009-05-10 23:48:28.000000000 +0200
+@@ -82,9 +82,7 @@
+ struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
+ volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
+-
+-int __initdata memory_end_set;
+-unsigned long __initdata memory_end;
++static unsigned long __initdata memory_end;
+ /*
+  * This is set up by the setup-routine at boot-time
+@@ -283,7 +281,6 @@
+ static int __init early_parse_mem(char *p)
+ {
+       memory_end = memparse(p, &p);
+-      memory_end_set = 1;
+       return 0;
+ }
+ early_param("mem", early_parse_mem);
+@@ -511,10 +508,8 @@
+       int i;
+ #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+-      if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
++      if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+               memory_end = ZFCPDUMP_HSA_SIZE;
+-              memory_end_set = 1;
+-      }
+ #endif
+       memory_size = 0;
+       memory_end &= PAGE_MASK;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/kvm/kvm-s390.c linux-2.6.29-rc3.owrt/arch/s390/kvm/kvm-s390.c
+--- linux-2.6.29.owrt/arch/s390/kvm/kvm-s390.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/kvm/kvm-s390.c     2009-05-10 23:48:28.000000000 +0200
+@@ -212,10 +212,6 @@
+       }
+ }
+-void kvm_arch_sync_events(struct kvm *kvm)
+-{
+-}
+-
+ void kvm_arch_destroy_vm(struct kvm *kvm)
+ {
+       kvm_free_vcpus(kvm);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/lib/div64.c linux-2.6.29-rc3.owrt/arch/s390/lib/div64.c
+--- linux-2.6.29.owrt/arch/s390/lib/div64.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/lib/div64.c        2009-05-10 23:48:28.000000000 +0200
+@@ -61,7 +61,7 @@
+               "       clr     %0,%3\n"
+               "       jl      0f\n"
+               "       slr     %0,%3\n"
+-              "       ahi     %1,1\n"
++              "       alr     %1,%2\n"
+               "0:\n"
+               : "+d" (reg2), "+d" (reg3), "=d" (tmp)
+               : "d" (base), "2" (1UL) : "cc" );
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/lib/uaccess_pt.c linux-2.6.29-rc3.owrt/arch/s390/lib/uaccess_pt.c
+--- linux-2.6.29.owrt/arch/s390/lib/uaccess_pt.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/lib/uaccess_pt.c   2009-05-10 23:48:28.000000000 +0200
+@@ -119,6 +119,8 @@
+                       goto fault;
+               pfn = pte_pfn(*pte);
++              if (!pfn_valid(pfn))
++                      goto out;
+               offset = uaddr & (PAGE_SIZE - 1);
+               size = min(n - done, PAGE_SIZE - offset);
+@@ -133,6 +135,7 @@
+               done += size;
+               uaddr += size;
+       } while (done < n);
++out:
+       spin_unlock(&mm->page_table_lock);
+       return n - done;
+ fault:
+@@ -160,6 +163,9 @@
+               goto fault;
+       pfn = pte_pfn(*pte);
++      if (!pfn_valid(pfn))
++              goto out;
++
+       ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
+ out:
+       return ret;
+@@ -238,6 +244,11 @@
+                       goto fault;
+               pfn = pte_pfn(*pte);
++              if (!pfn_valid(pfn)) {
++                      done = -1;
++                      goto out;
++              }
++
+               offset = uaddr & (PAGE_SIZE-1);
+               addr = (char *)(pfn << PAGE_SHIFT) + offset;
+               len = min(count - done, PAGE_SIZE - offset);
+@@ -245,6 +256,7 @@
+               done += len_str;
+               uaddr += len_str;
+       } while ((len_str == len) && (done < count));
++out:
+       spin_unlock(&mm->page_table_lock);
+       return done + 1;
+ fault:
+@@ -313,7 +325,12 @@
+               }
+               pfn_from = pte_pfn(*pte_from);
++              if (!pfn_valid(pfn_from))
++                      goto out;
+               pfn_to = pte_pfn(*pte_to);
++              if (!pfn_valid(pfn_to))
++                      goto out;
++
+               offset_from = uaddr_from & (PAGE_SIZE-1);
+               offset_to = uaddr_from & (PAGE_SIZE-1);
+               offset_max = max(offset_from, offset_to);
+@@ -325,6 +342,7 @@
+               uaddr_from += size;
+               uaddr_to += size;
+       } while (done < n);
++out:
+       spin_unlock(&mm->page_table_lock);
+       return n - done;
+ fault:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/mm/mmap.c linux-2.6.29-rc3.owrt/arch/s390/mm/mmap.c
+--- linux-2.6.29.owrt/arch/s390/mm/mmap.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/mm/mmap.c  2009-05-10 23:48:28.000000000 +0200
+@@ -35,7 +35,7 @@
+  * Leave an at least ~128 MB hole.
+  */
+ #define MIN_GAP (128*1024*1024)
+-#define MAX_GAP (STACK_TOP/6*5)
++#define MAX_GAP (TASK_SIZE/6*5)
+ static inline unsigned long mmap_base(void)
+ {
+@@ -46,7 +46,7 @@
+       else if (gap > MAX_GAP)
+               gap = MAX_GAP;
+-      return STACK_TOP - (gap & PAGE_MASK);
++      return TASK_SIZE - (gap & PAGE_MASK);
+ }
+ static inline int mmap_is_legacy(void)
+@@ -89,58 +89,42 @@
+ #else
+-int s390_mmap_check(unsigned long addr, unsigned long len)
+-{
+-      if (!test_thread_flag(TIF_31BIT) &&
+-          len >= TASK_SIZE && TASK_SIZE < (1UL << 53))
+-              return crst_table_upgrade(current->mm, 1UL << 53);
+-      return 0;
+-}
+-
+ static unsigned long
+ s390_get_unmapped_area(struct file *filp, unsigned long addr,
+               unsigned long len, unsigned long pgoff, unsigned long flags)
+ {
+       struct mm_struct *mm = current->mm;
+-      unsigned long area;
+       int rc;
+-      area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
+-      if (!(area & ~PAGE_MASK))
+-              return area;
+-      if (area == -ENOMEM &&
+-          !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+-              /* Upgrade the page table to 4 levels and retry. */
+-              rc = crst_table_upgrade(mm, 1UL << 53);
++      addr = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
++      if (addr & ~PAGE_MASK)
++              return addr;
++      if (unlikely(mm->context.asce_limit < addr + len)) {
++              rc = crst_table_upgrade(mm, addr + len);
+               if (rc)
+                       return (unsigned long) rc;
+-              area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
+       }
+-      return area;
++      return addr;
+ }
+ static unsigned long
+-s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
++s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+                         const unsigned long len, const unsigned long pgoff,
+                         const unsigned long flags)
+ {
+       struct mm_struct *mm = current->mm;
+-      unsigned long area;
++      unsigned long addr = addr0;
+       int rc;
+-      area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
+-      if (!(area & ~PAGE_MASK))
+-              return area;
+-      if (area == -ENOMEM &&
+-          !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+-              /* Upgrade the page table to 4 levels and retry. */
+-              rc = crst_table_upgrade(mm, 1UL << 53);
++      addr = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
++      if (addr & ~PAGE_MASK)
++              return addr;
++      if (unlikely(mm->context.asce_limit < addr + len)) {
++              rc = crst_table_upgrade(mm, addr + len);
+               if (rc)
+                       return (unsigned long) rc;
+-              area = arch_get_unmapped_area_topdown(filp, addr, len,
+-                                                    pgoff, flags);
+       }
+-      return area;
++      return addr;
+ }
+ /*
+  * This function, called very early during the creation of a new
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/s390/mm/pgtable.c linux-2.6.29-rc3.owrt/arch/s390/mm/pgtable.c
+--- linux-2.6.29.owrt/arch/s390/mm/pgtable.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/s390/mm/pgtable.c       2009-05-10 23:48:28.000000000 +0200
+@@ -117,7 +117,6 @@
+               crst_table_init(table, entry);
+               pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
+               mm->pgd = (pgd_t *) table;
+-              mm->task_size = mm->context.asce_limit;
+               table = NULL;
+       }
+       spin_unlock(&mm->page_table_lock);
+@@ -155,7 +154,6 @@
+                       BUG();
+               }
+               mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+-              mm->task_size = mm->context.asce_limit;
+               crst_table_free(mm, (unsigned long *) pgd);
+       }
+       update_mm(mm, current);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/boards/board-ap325rxa.c linux-2.6.29-rc3.owrt/arch/sh/boards/board-ap325rxa.c
+--- linux-2.6.29.owrt/arch/sh/boards/board-ap325rxa.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/boards/board-ap325rxa.c      2009-05-10 23:48:28.000000000 +0200
+@@ -22,7 +22,6 @@
+ #include <linux/gpio.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+-#include <media/soc_camera.h>
+ #include <media/soc_camera_platform.h>
+ #include <media/sh_mobile_ceu.h>
+ #include <video/sh_mobile_lcdc.h>
+@@ -217,12 +216,6 @@
+       },
+ };
+-static void camera_power(int val)
+-{
+-      gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+-      mdelay(10);
+-}
+-
+ #ifdef CONFIG_I2C
+ static unsigned char camera_ncm03j_magic[] =
+ {
+@@ -252,11 +245,9 @@
+       int ret = 0;
+       int i;
+-      camera_power(0);
+       if (!enable)
+               return 0; /* no disable for now */
+-      camera_power(1);
+       for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+               u_int8_t buf[8];
+@@ -435,7 +426,7 @@
+       gpio_request(GPIO_PTZ6, NULL);
+       gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
+       gpio_request(GPIO_PTZ5, NULL);
+-      gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
++      gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+       gpio_request(GPIO_PTZ4, NULL);
+       gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/configs/ap325rxa_defconfig linux-2.6.29-rc3.owrt/arch/sh/configs/ap325rxa_defconfig
+--- linux-2.6.29.owrt/arch/sh/configs/ap325rxa_defconfig       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/configs/ap325rxa_defconfig   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc2
+-# Tue Jan 27 11:45:08 2009
++# Linux kernel version: 2.6.28
++# Fri Jan  9 16:54:19 2009
+ #
+ CONFIG_SUPERH=y
+ CONFIG_SUPERH32=y
+@@ -45,12 +45,12 @@
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_CGROUPS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -378,7 +378,6 @@
+ # CONFIG_WIRELESS_EXT is not set
+ # CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -401,7 +400,6 @@
+ # CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_CONCAT=y
+ CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ # CONFIG_MTD_AR7_PARTS is not set
+@@ -449,7 +447,9 @@
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-# CONFIG_MTD_PHYSMAP_COMPAT is not set
++CONFIG_MTD_PHYSMAP_START=0xffffffff
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_PLATRAM is not set
+ #
+@@ -480,12 +480,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ CONFIG_MTD_UBI=y
+@@ -613,10 +607,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -800,7 +790,6 @@
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -848,7 +837,7 @@
+ # CONFIG_SOC_CAMERA_MT9V022 is not set
+ # CONFIG_SOC_CAMERA_TW9910 is not set
+ CONFIG_SOC_CAMERA_PLATFORM=y
+-CONFIG_SOC_CAMERA_OV772X=y
++# CONFIG_SOC_CAMERA_OV772X is not set
+ CONFIG_VIDEO_SH_MOBILE_CEU=y
+ # CONFIG_RADIO_ADAPTERS is not set
+ # CONFIG_DAB is not set
+@@ -1023,7 +1012,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -1072,7 +1060,6 @@
+ # CONFIG_JFFS2_FS is not set
+ # CONFIG_UBIFS_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/configs/migor_defconfig linux-2.6.29-rc3.owrt/arch/sh/configs/migor_defconfig
+--- linux-2.6.29.owrt/arch/sh/configs/migor_defconfig  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/configs/migor_defconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.29-rc1
+-# Thu Jan 22 09:16:16 2009
++# Linux kernel version: 2.6.28
++# Fri Jan  9 17:09:35 2009
+ #
+ CONFIG_SUPERH=y
+ CONFIG_SUPERH32=y
+@@ -45,12 +45,8 @@
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_GROUP_SCHED is not set
+-
+-#
+-# Control Group support
+-#
+ # CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -393,7 +389,6 @@
+ CONFIG_WIRELESS_EXT_SYSFS=y
+ # CONFIG_LIB80211 is not set
+ # CONFIG_MAC80211 is not set
+-# CONFIG_WIMAX is not set
+ # CONFIG_RFKILL is not set
+ # CONFIG_NET_9P is not set
+@@ -416,7 +411,6 @@
+ # CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_CONCAT=y
+ CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_TESTS is not set
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ CONFIG_MTD_CMDLINE_PARTS=y
+ # CONFIG_MTD_AR7_PARTS is not set
+@@ -464,7 +458,9 @@
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-# CONFIG_MTD_PHYSMAP_COMPAT is not set
++CONFIG_MTD_PHYSMAP_START=0xffffffff
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_PLATRAM is not set
+ #
+@@ -492,12 +488,6 @@
+ # CONFIG_MTD_ONENAND is not set
+ #
+-# LPDDR flash memory drivers
+-#
+-# CONFIG_MTD_LPDDR is not set
+-# CONFIG_MTD_QINFO_PROBE is not set
+-
+-#
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+@@ -597,10 +587,6 @@
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
+ # CONFIG_IWLWIFI_LEDS is not set
+-
+-#
+-# Enable WiMAX (Networking options) to see the WiMAX drivers
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -775,7 +761,6 @@
+ # CONFIG_PMIC_DA903X is not set
+ # CONFIG_MFD_WM8400 is not set
+ # CONFIG_MFD_WM8350_I2C is not set
+-# CONFIG_MFD_PCF50633 is not set
+ # CONFIG_REGULATOR is not set
+ #
+@@ -821,9 +806,9 @@
+ # CONFIG_SOC_CAMERA_MT9M111 is not set
+ # CONFIG_SOC_CAMERA_MT9T031 is not set
+ # CONFIG_SOC_CAMERA_MT9V022 is not set
+-CONFIG_SOC_CAMERA_TW9910=y
+-# CONFIG_SOC_CAMERA_PLATFORM is not set
+-CONFIG_SOC_CAMERA_OV772X=y
++# CONFIG_SOC_CAMERA_TW9910 is not set
++CONFIG_SOC_CAMERA_PLATFORM=y
++# CONFIG_SOC_CAMERA_OV772X is not set
+ CONFIG_VIDEO_SH_MOBILE_CEU=y
+ # CONFIG_RADIO_ADAPTERS is not set
+ # CONFIG_DAB is not set
+@@ -881,13 +866,11 @@
+ # CONFIG_USB_GADGET_PXA25X is not set
+ # CONFIG_USB_GADGET_PXA27X is not set
+ # CONFIG_USB_GADGET_S3C2410 is not set
+-# CONFIG_USB_GADGET_IMX is not set
+ CONFIG_USB_GADGET_M66592=y
+ CONFIG_USB_M66592=y
+ CONFIG_SUPERH_BUILT_IN_M66592=y
+ # CONFIG_USB_GADGET_AMD5536UDC is not set
+ # CONFIG_USB_GADGET_FSL_QE is not set
+-# CONFIG_USB_GADGET_CI13XXX is not set
+ # CONFIG_USB_GADGET_NET2280 is not set
+ # CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+@@ -900,11 +883,6 @@
+ # CONFIG_USB_MIDI_GADGET is not set
+ # CONFIG_USB_G_PRINTER is not set
+ # CONFIG_USB_CDC_COMPOSITE is not set
+-
+-#
+-# OTG and related infrastructure
+-#
+-# CONFIG_USB_GPIO_VBUS is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+@@ -983,7 +961,6 @@
+ CONFIG_FILE_LOCKING=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_BTRFS_FS is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_INOTIFY is not set
+ # CONFIG_QUOTA is not set
+@@ -1027,7 +1004,6 @@
+ # CONFIG_EFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+-# CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_OMFS_FS is not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/include/asm/mutex-llsc.h linux-2.6.29-rc3.owrt/arch/sh/include/asm/mutex-llsc.h
+--- linux-2.6.29.owrt/arch/sh/include/asm/mutex-llsc.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/include/asm/mutex-llsc.h     2009-05-10 23:48:28.000000000 +0200
+@@ -21,36 +21,38 @@
+ static inline void
+ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+ {
+-      int __done, __res;
++      int __ex_flag, __res;
+       __asm__ __volatile__ (
+               "movli.l        @%2, %0 \n"
+               "add            #-1, %0 \n"
+               "movco.l        %0, @%2 \n"
+               "movt           %1      \n"
+-              : "=&z" (__res), "=&r" (__done)
++              : "=&z" (__res), "=&r" (__ex_flag)
+               : "r" (&(count)->counter)
+               : "t");
+-      if (unlikely(!__done || __res != 0))
++      __res |= !__ex_flag;
++      if (unlikely(__res != 0))
+               fail_fn(count);
+ }
+ static inline int
+ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+ {
+-      int __done, __res;
++      int __ex_flag, __res;
+       __asm__ __volatile__ (
+               "movli.l        @%2, %0 \n"
+               "add            #-1, %0 \n"
+               "movco.l        %0, @%2 \n"
+               "movt           %1      \n"
+-              : "=&z" (__res), "=&r" (__done)
++              : "=&z" (__res), "=&r" (__ex_flag)
+               : "r" (&(count)->counter)
+               : "t");
+-      if (unlikely(!__done || __res != 0))
++      __res |= !__ex_flag;
++      if (unlikely(__res != 0))
+               __res = fail_fn(count);
+       return __res;
+@@ -59,18 +61,19 @@
+ static inline void
+ __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+ {
+-      int __done, __res;
++      int __ex_flag, __res;
+       __asm__ __volatile__ (
+               "movli.l        @%2, %0 \n\t"
+               "add            #1, %0  \n\t"
+               "movco.l        %0, @%2 \n\t"
+               "movt           %1      \n\t"
+-              : "=&z" (__res), "=&r" (__done)
++              : "=&z" (__res), "=&r" (__ex_flag)
+               : "r" (&(count)->counter)
+               : "t");
+-      if (unlikely(!__done || __res <= 0))
++      __res |= !__ex_flag;
++      if (unlikely(__res <= 0))
+               fail_fn(count);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/include/asm/syscall_32.h linux-2.6.29-rc3.owrt/arch/sh/include/asm/syscall_32.h
+--- linux-2.6.29.owrt/arch/sh/include/asm/syscall_32.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/include/asm/syscall_32.h     2009-05-10 23:48:28.000000000 +0200
+@@ -21,10 +21,23 @@
+        */
+ }
++static inline bool syscall_has_error(struct pt_regs *regs)
++{
++      return (regs->sr & 0x1) ? true : false;
++}
++static inline void syscall_set_error(struct pt_regs *regs)
++{
++      regs->sr |= 0x1;
++}
++static inline void syscall_clear_error(struct pt_regs *regs)
++{
++      regs->sr &= ~0x1;
++}
++
+ static inline long syscall_get_error(struct task_struct *task,
+                                    struct pt_regs *regs)
+ {
+-      return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
++      return syscall_has_error(regs) ? regs->regs[0] : 0;
+ }
+ static inline long syscall_get_return_value(struct task_struct *task,
+@@ -37,10 +50,13 @@
+                                           struct pt_regs *regs,
+                                           int error, long val)
+ {
+-      if (error)
++      if (error) {
++              syscall_set_error(regs);
+               regs->regs[0] = -error;
+-      else
++      } else {
++              syscall_clear_error(regs);
+               regs->regs[0] = val;
++      }
+ }
+ static inline void syscall_get_arguments(struct task_struct *task,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/include/asm/syscall_64.h linux-2.6.29-rc3.owrt/arch/sh/include/asm/syscall_64.h
+--- linux-2.6.29.owrt/arch/sh/include/asm/syscall_64.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/include/asm/syscall_64.h     2009-05-10 23:48:28.000000000 +0200
+@@ -21,10 +21,23 @@
+        */
+ }
++static inline bool syscall_has_error(struct pt_regs *regs)
++{
++      return (regs->sr & 0x1) ? true : false;
++}
++static inline void syscall_set_error(struct pt_regs *regs)
++{
++      regs->sr |= 0x1;
++}
++static inline void syscall_clear_error(struct pt_regs *regs)
++{
++      regs->sr &= ~0x1;
++}
++
+ static inline long syscall_get_error(struct task_struct *task,
+                                    struct pt_regs *regs)
+ {
+-      return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
++      return syscall_has_error(regs) ? regs->regs[9] : 0;
+ }
+ static inline long syscall_get_return_value(struct task_struct *task,
+@@ -37,10 +50,13 @@
+                                           struct pt_regs *regs,
+                                           int error, long val)
+ {
+-      if (error)
++      if (error) {
++              syscall_set_error(regs);
+               regs->regs[9] = -error;
+-      else
++      } else {
++              syscall_clear_error(regs);
+               regs->regs[9] = val;
++      }
+ }
+ static inline void syscall_get_arguments(struct task_struct *task,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/kernel/cpu/sh2a/clock-sh7201.c linux-2.6.29-rc3.owrt/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+--- linux-2.6.29.owrt/arch/sh/kernel/cpu/sh2a/clock-sh7201.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/kernel/cpu/sh2a/clock-sh7201.c       2009-05-10 23:48:28.000000000 +0200
+@@ -18,8 +18,8 @@
+ #include <asm/freq.h>
+ #include <asm/io.h>
+-static const int pll1rate[]={1,2,3,4,6,8};
+-static const int pfc_divisors[]={1,2,3,4,6,8,12};
++const static int pll1rate[]={1,2,3,4,6,8};
++const static int pfc_divisors[]={1,2,3,4,6,8,12};
+ #define ifc_divisors pfc_divisors
+ #if (CONFIG_SH_CLK_MD == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/kernel/cpu/sh4/fpu.c linux-2.6.29-rc3.owrt/arch/sh/kernel/cpu/sh4/fpu.c
+--- linux-2.6.29.owrt/arch/sh/kernel/cpu/sh4/fpu.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/kernel/cpu/sh4/fpu.c 2009-05-10 23:48:28.000000000 +0200
+@@ -423,7 +423,7 @@
+               int m;
+               unsigned int hx;
+-              m = (finsn >> 8) & 0x7;
++              m = (finsn >> 9) & 0x7;
+               hx = tsk->thread.fpu.hard.fp_regs[m];
+               if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/kernel/setup.c linux-2.6.29-rc3.owrt/arch/sh/kernel/setup.c
+--- linux-2.6.29.owrt/arch/sh/kernel/setup.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/kernel/setup.c       2009-05-10 23:48:28.000000000 +0200
+@@ -262,11 +262,11 @@
+                       BOOTMEM_DEFAULT);
+       /*
+-       * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
++       * reserve physical page 0 - it's a special BIOS page on many boxes,
++       * enabling clean reboots, SMP operation, laptop functions.
+        */
+-      if (CONFIG_ZERO_PAGE_OFFSET != 0)
+-              reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+-                              BOOTMEM_DEFAULT);
++      reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
++                      BOOTMEM_DEFAULT);
+       sparse_memory_present_with_active_regions(0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/kernel/signal_32.c linux-2.6.29-rc3.owrt/arch/sh/kernel/signal_32.c
+--- linux-2.6.29.owrt/arch/sh/kernel/signal_32.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/kernel/signal_32.c   2009-05-10 23:48:28.000000000 +0200
+@@ -510,6 +510,7 @@
+               case -ERESTARTNOHAND:
+               no_system_call_restart:
+                       regs->regs[0] = -EINTR;
++                      regs->sr |= 1;
+                       break;
+               case -ERESTARTSYS:
+@@ -588,7 +589,8 @@
+       signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+       if (signr > 0) {
+-              handle_syscall_restart(save_r0, regs, &ka.sa);
++              if (regs->sr & 1)
++                      handle_syscall_restart(save_r0, regs, &ka.sa);
+               /* Whee!  Actually deliver the signal.  */
+               if (handle_signal(signr, &ka, &info, oldset,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/kernel/signal_64.c linux-2.6.29-rc3.owrt/arch/sh/kernel/signal_64.c
+--- linux-2.6.29.owrt/arch/sh/kernel/signal_64.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/kernel/signal_64.c   2009-05-10 23:48:28.000000000 +0200
+@@ -60,6 +60,7 @@
+               case -ERESTARTNOHAND:
+               no_system_call_restart:
+                       regs->regs[REG_RET] = -EINTR;
++                      regs->sr |= 1;
+                       break;
+               case -ERESTARTSYS:
+@@ -108,7 +109,8 @@
+       signr = get_signal_to_deliver(&info, &ka, regs, 0);
+       if (signr > 0) {
+-              handle_syscall_restart(regs, &ka.sa);
++              if (regs->sr & 1)
++                      handle_syscall_restart(regs, &ka.sa);
+               /* Whee!  Actually deliver the signal.  */
+               if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sh/lib/checksum.S linux-2.6.29-rc3.owrt/arch/sh/lib/checksum.S
+--- linux-2.6.29.owrt/arch/sh/lib/checksum.S   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sh/lib/checksum.S       2009-05-10 23:48:28.000000000 +0200
+@@ -36,7 +36,8 @@
+  */
+ /*    
+- * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
++ * unsigned int csum_partial(const unsigned char *buf, int len,
++ *                           unsigned int sum);
+  */
+ .text
+@@ -48,31 +49,11 @@
+          * Fortunately, it is easy to convert 2-byte alignment to 4-byte
+          * alignment for the unrolled loop.
+          */
++      mov     r5, r1
+       mov     r4, r0
+-      tst     #3, r0          ! Check alignment.
+-      bt/s    2f              ! Jump if alignment is ok.
+-       mov    r4, r7          ! Keep a copy to check for alignment
++      tst     #2, r0          ! Check alignment.
++      bt      2f              ! Jump if alignment is ok.
+       !
+-      tst     #1, r0          ! Check alignment.
+-      bt      21f             ! Jump if alignment is boundary of 2bytes.
+-
+-      ! buf is odd
+-      tst     r5, r5
+-      add     #-1, r5
+-      bt      9f
+-      mov.b   @r4+, r0
+-      extu.b  r0, r0
+-      addc    r0, r6          ! t=0 from previous tst
+-      mov     r6, r0
+-      shll8   r6
+-      shlr16  r0
+-      shlr8   r0
+-      or      r0, r6
+-      mov     r4, r0
+-      tst     #2, r0
+-      bt      2f
+-21:
+-      ! buf is 2 byte aligned (len could be 0)
+       add     #-2, r5         ! Alignment uses up two bytes.
+       cmp/pz  r5              !
+       bt/s    1f              ! Jump if we had at least two bytes.
+@@ -80,17 +61,16 @@
+       bra     6f
+        add    #2, r5          ! r5 was < 2.  Deal with it.
+ 1:
++      mov     r5, r1          ! Save new len for later use.
+       mov.w   @r4+, r0
+       extu.w  r0, r0
+       addc    r0, r6
+       bf      2f
+       add     #1, r6
+ 2:
+-      ! buf is 4 byte aligned (len could be 0)
+-      mov     r5, r1
+       mov     #-5, r0
+-      shld    r0, r1
+-      tst     r1, r1
++      shld    r0, r5
++      tst     r5, r5
+       bt/s    4f              ! if it's =0, go to 4f
+        clrt
+       .align  2
+@@ -112,31 +92,30 @@
+       addc    r0, r6
+       addc    r2, r6
+       movt    r0
+-      dt      r1
++      dt      r5
+       bf/s    3b
+        cmp/eq #1, r0
+-      ! here, we know r1==0
+-      addc    r1, r6                  ! add carry to r6
++      ! here, we know r5==0
++      addc    r5, r6                  ! add carry to r6
+ 4:
+-      mov     r5, r0
++      mov     r1, r0
+       and     #0x1c, r0
+       tst     r0, r0
+-      bt      6f
+-      ! 4 bytes or more remaining
+-      mov     r0, r1
+-      shlr2   r1
++      bt/s    6f
++       mov    r0, r5
++      shlr2   r5
+       mov     #0, r2
+ 5:
+       addc    r2, r6
+       mov.l   @r4+, r2
+       movt    r0
+-      dt      r1
++      dt      r5
+       bf/s    5b
+        cmp/eq #1, r0
+       addc    r2, r6
+-      addc    r1, r6          ! r1==0 here, so it means add carry-bit
++      addc    r5, r6          ! r5==0 here, so it means add carry-bit
+ 6:
+-      ! 3 bytes or less remaining
++      mov     r1, r5
+       mov     #3, r0
+       and     r0, r5
+       tst     r5, r5
+@@ -160,18 +139,8 @@
+ 8:
+       addc    r0, r6
+       mov     #0, r0
+-      addc    r0, r6
++      addc    r0, r6 
+ 9:
+-      ! Check if the buffer was misaligned, if so realign sum
+-      mov     r7, r0
+-      tst     #1, r0
+-      bt      10f
+-      mov     r6, r0
+-      shll8   r6
+-      shlr16  r0
+-      shlr8   r0
+-      or      r0, r6
+-10:
+       rts
+        mov    r6, r0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/compat.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/compat.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/compat.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/compat.h      2009-05-10 23:48:28.000000000 +0200
+@@ -240,9 +240,4 @@
+       unsigned int    __unused2;
+ };
+-static inline int is_compat_task(void)
+-{
+-      return test_thread_flag(TIF_32BIT);
+-}
+-
+ #endif /* _ASM_SPARC64_COMPAT_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/cpudata_64.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/cpudata_64.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/cpudata_64.h      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/cpudata_64.h  2009-05-10 23:48:28.000000000 +0200
+@@ -17,7 +17,7 @@
+ typedef struct {
+       /* Dcache line 1 */
+       unsigned int    __softirq_pending; /* must be 1st, see rtrap.S */
+-      unsigned int    __nmi_count;
++      unsigned int    __pad0;
+       unsigned long   clock_tick;     /* %tick's per second */
+       unsigned long   __pad;
+       unsigned int    __pad1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/irq_64.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/irq_64.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/irq_64.h  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/irq_64.h      2009-05-10 23:48:28.000000000 +0200
+@@ -66,6 +66,9 @@
+ extern void __init init_IRQ(void);
+ extern void fixup_irqs(void);
++extern int register_perfctr_intr(void (*handler)(struct pt_regs *));
++extern void release_perfctr_intr(void (*handler)(struct pt_regs *));
++
+ static inline void set_softint(unsigned long bits)
+ {
+       __asm__ __volatile__("wr        %0, 0x0, %%set_softint"
+@@ -95,6 +98,5 @@
+ extern void *hardirq_stack[NR_CPUS];
+ extern void *softirq_stack[NR_CPUS];
+ #define __ARCH_HAS_DO_SOFTIRQ
+-#define ARCH_HAS_NMI_WATCHDOG
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/kdebug_64.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/kdebug_64.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/kdebug_64.h       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/kdebug_64.h   2009-05-10 23:48:28.000000000 +0200
+@@ -14,8 +14,6 @@
+       DIE_TRAP,
+       DIE_TRAP_TL1,
+       DIE_CALL,
+-      DIE_NMI,
+-      DIE_NMIWATCHDOG,
+ };
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/nmi.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/nmi.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/nmi.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/nmi.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,10 +0,0 @@
+-#ifndef __NMI_H
+-#define __NMI_H
+-
+-extern int __init nmi_init(void);
+-extern void perfctr_irq(int irq, struct pt_regs *regs);
+-extern void nmi_adjust_hz(unsigned int new_hz);
+-
+-extern int nmi_usable;
+-
+-#endif /* __NMI_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/pcr.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/pcr.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/pcr.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/pcr.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,46 +0,0 @@
+-#ifndef __PCR_H
+-#define __PCR_H
+-
+-struct pcr_ops {
+-      u64 (*read)(void);
+-      void (*write)(u64);
+-};
+-extern const struct pcr_ops *pcr_ops;
+-
+-extern void deferred_pcr_work_irq(int irq, struct pt_regs *regs);
+-extern void schedule_deferred_pcr_work(void);
+-
+-#define PCR_PIC_PRIV          0x00000001 /* PIC access is privileged */
+-#define PCR_STRACE            0x00000002 /* Trace supervisor events  */
+-#define PCR_UTRACE            0x00000004 /* Trace user events        */
+-#define PCR_N2_HTRACE         0x00000008 /* Trace hypervisor events  */
+-#define PCR_N2_TOE_OV0                0x00000010 /* Trap if PIC 0 overflows  */
+-#define PCR_N2_TOE_OV1                0x00000020 /* Trap if PIC 1 overflows  */
+-#define PCR_N2_MASK0          0x00003fc0
+-#define PCR_N2_MASK0_SHIFT    6
+-#define PCR_N2_SL0            0x0003c000
+-#define PCR_N2_SL0_SHIFT      14
+-#define PCR_N2_OV0            0x00040000
+-#define PCR_N2_MASK1          0x07f80000
+-#define PCR_N2_MASK1_SHIFT    19
+-#define PCR_N2_SL1            0x78000000
+-#define PCR_N2_SL1_SHIFT      27
+-#define PCR_N2_OV1            0x80000000
+-
+-extern unsigned int picl_shift;
+-
+-/* In order to commonize as much of the implementation as
+- * possible, we use PICH as our counter.  Mostly this is
+- * to accomodate Niagara-1 which can only count insn cycles
+- * in PICH.
+- */
+-static inline u64 picl_value(unsigned int nmi_hz)
+-{
+-      u32 delta = local_cpu_data().clock_tick / (nmi_hz << picl_shift);
+-
+-      return ((u64)((0 - delta) & 0xffffffff)) << 32;
+-}
+-
+-extern u64 pcr_enable;
+-
+-#endif /* __PCR_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/pil.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/pil.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/pil.h     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/pil.h 2009-05-10 23:48:28.000000000 +0200
+@@ -23,8 +23,6 @@
+ #define PIL_SMP_CTX_NEW_VERSION       4
+ #define PIL_DEVICE_IRQ                5
+ #define PIL_SMP_CALL_FUNC_SNGL        6
+-#define PIL_DEFERRED_PCR_WORK 7
+-#define PIL_KGDB_CAPTURE      8
+ #define PIL_NORMAL_MAX                14
+ #define PIL_NMI                       15
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/include/asm/seccomp.h linux-2.6.29-rc3.owrt/arch/sparc/include/asm/seccomp.h
+--- linux-2.6.29.owrt/arch/sparc/include/asm/seccomp.h 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/include/asm/seccomp.h     2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,11 @@
+ #ifndef _ASM_SECCOMP_H
++#include <linux/thread_info.h> /* already defines TIF_32BIT */
++
++#ifndef TIF_32BIT
++#error "unexpected TIF_32BIT on sparc64"
++#endif
++
+ #include <linux/unistd.h>
+ #define __NR_seccomp_read __NR_read
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/chmc.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/chmc.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/chmc.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/chmc.c     2009-05-10 23:48:28.000000000 +0200
+@@ -306,7 +306,6 @@
+               buf[1] = '?';
+               buf[2] = '?';
+               buf[3] = '\0';
+-              return 0;
+       }
+       p = dp->controller;
+       prop = &p->layout;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/cpu.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/cpu.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/cpu.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/cpu.c      2009-05-10 23:48:28.000000000 +0200
+@@ -26,7 +26,6 @@
+ struct cpu_info {
+       int psr_vers;
+       const char *name;
+-      const char *pmu_name;
+ };
+ struct fpu_info {
+@@ -46,9 +45,6 @@
+ #define CPU(ver, _name) \
+ { .psr_vers = ver, .name = _name }
+-#define CPU_PMU(ver, _name, _pmu_name)        \
+-{ .psr_vers = ver, .name = _name, .pmu_name = _pmu_name }
+-
+ #define FPU(ver, _name) \
+ { .fp_vers = ver, .name = _name }
+@@ -187,10 +183,10 @@
+ },{
+       0x17,
+       .cpu_info = {
+-              CPU_PMU(0x10, "TI UltraSparc I   (SpitFire)", "ultra12"),
+-              CPU_PMU(0x11, "TI UltraSparc II  (BlackBird)", "ultra12"),
+-              CPU_PMU(0x12, "TI UltraSparc IIi (Sabre)", "ultra12"),
+-              CPU_PMU(0x13, "TI UltraSparc IIe (Hummingbird)", "ultra12"),
++              CPU(0x10, "TI UltraSparc I   (SpitFire)"),
++              CPU(0x11, "TI UltraSparc II  (BlackBird)"),
++              CPU(0x12, "TI UltraSparc IIi (Sabre)"),
++              CPU(0x13, "TI UltraSparc IIe (Hummingbird)"),
+               CPU(-1, NULL)
+       },
+       .fpu_info = {
+@@ -203,7 +199,7 @@
+ },{
+       0x22,
+       .cpu_info = {
+-              CPU_PMU(0x10, "TI UltraSparc I   (SpitFire)", "ultra12"),
++              CPU(0x10, "TI UltraSparc I   (SpitFire)"),
+               CPU(-1, NULL)
+       },
+       .fpu_info = {
+@@ -213,12 +209,12 @@
+ },{
+       0x3e,
+       .cpu_info = {
+-              CPU_PMU(0x14, "TI UltraSparc III (Cheetah)", "ultra3"),
+-              CPU_PMU(0x15, "TI UltraSparc III+ (Cheetah+)", "ultra3+"),
+-              CPU_PMU(0x16, "TI UltraSparc IIIi (Jalapeno)", "ultra3i"),
+-              CPU_PMU(0x18, "TI UltraSparc IV (Jaguar)", "ultra3+"),
+-              CPU_PMU(0x19, "TI UltraSparc IV+ (Panther)", "ultra4+"),
+-              CPU_PMU(0x22, "TI UltraSparc IIIi+ (Serrano)", "ultra3i"),
++              CPU(0x14, "TI UltraSparc III (Cheetah)"),
++              CPU(0x15, "TI UltraSparc III+ (Cheetah+)"),
++              CPU(0x16, "TI UltraSparc IIIi (Jalapeno)"),
++              CPU(0x18, "TI UltraSparc IV (Jaguar)"),
++              CPU(0x19, "TI UltraSparc IV+ (Panther)"),
++              CPU(0x22, "TI UltraSparc IIIi+ (Serrano)"),
+               CPU(-1, NULL)
+       },
+       .fpu_info = {
+@@ -238,7 +234,6 @@
+ const char *sparc_cpu_type;
+ const char *sparc_fpu_type;
+-const char *sparc_pmu_type;
+ unsigned int fsr_storage;
+@@ -249,7 +244,6 @@
+       sparc_cpu_type = NULL;
+       sparc_fpu_type = NULL;
+-      sparc_pmu_type = NULL;
+       manuf = NULL;
+       for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
+@@ -269,7 +263,6 @@
+               {
+                       if (cpu->psr_vers == psr_vers) {
+                               sparc_cpu_type = cpu->name;
+-                              sparc_pmu_type = cpu->pmu_name;
+                               sparc_fpu_type = "No FPU";
+                               break;
+                       }
+@@ -297,8 +290,6 @@
+                      psr_impl, fpu_vers);
+               sparc_fpu_type = "Unknown FPU";
+       }
+-      if (sparc_pmu_type == NULL)
+-              sparc_pmu_type = "Unknown PMU";
+ }
+ #ifdef CONFIG_SPARC32
+@@ -324,13 +315,11 @@
+       case SUN4V_CHIP_NIAGARA1:
+               sparc_cpu_type = "UltraSparc T1 (Niagara)";
+               sparc_fpu_type = "UltraSparc T1 integrated FPU";
+-              sparc_pmu_type = "niagara";
+               break;
+       case SUN4V_CHIP_NIAGARA2:
+               sparc_cpu_type = "UltraSparc T2 (Niagara2)";
+               sparc_fpu_type = "UltraSparc T2 integrated FPU";
+-              sparc_pmu_type = "niagara2";
+               break;
+       default:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/head_64.S linux-2.6.29-rc3.owrt/arch/sparc/kernel/head_64.S
+--- linux-2.6.29.owrt/arch/sparc/kernel/head_64.S      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/head_64.S  2009-05-10 23:48:28.000000000 +0200
+@@ -891,35 +891,10 @@
+ tlb_type:     .word   0       /* Must NOT end up in BSS */
+       .section        ".fixup",#alloc,#execinstr
+-      .globl  __ret_efault, __retl_efault, __ret_one, __retl_one
+-ENTRY(__ret_efault)
++      .globl  __ret_efault, __retl_efault
++__ret_efault:
+       ret
+        restore %g0, -EFAULT, %o0
+-ENDPROC(__ret_efault)
+-
+-ENTRY(__retl_efault)
++__retl_efault:
+       retl
+        mov    -EFAULT, %o0
+-ENDPROC(__retl_efault)
+-
+-ENTRY(__retl_one)
+-      retl
+-       mov    1, %o0
+-ENDPROC(__retl_one)
+-
+-ENTRY(__ret_one_asi)
+-      wr      %g0, ASI_AIUS, %asi
+-      ret
+-       restore %g0, 1, %o0
+-ENDPROC(__ret_one_asi)
+-
+-ENTRY(__retl_one_asi)
+-      wr      %g0, ASI_AIUS, %asi
+-      retl
+-       mov    1, %o0
+-ENDPROC(__retl_one_asi)
+-
+-ENTRY(__retl_o1)
+-      retl
+-       mov    %o1, %o0
+-ENDPROC(__retl_o1)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/irq_64.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/irq_64.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/irq_64.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/irq_64.c   2009-05-10 23:48:28.000000000 +0200
+@@ -196,11 +196,6 @@
+               seq_putc(p, '\n');
+ skip:
+               spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+-      } else if (i == NR_IRQS) {
+-              seq_printf(p, "NMI: ");
+-              for_each_online_cpu(j)
+-                      seq_printf(p, "%10u ", cpu_data(j).__nmi_count);
+-              seq_printf(p, "     Non-maskable interrupts\n");
+       }
+       return 0;
+ }
+@@ -323,25 +318,17 @@
+       sun4u_irq_enable(virt_irq);
+ }
+-/* Don't do anything.  The desc->status check for IRQ_DISABLED in
+- * handler_irq() will skip the handler call and that will leave the
+- * interrupt in the sent state.  The next ->enable() call will hit the
+- * ICLR register to reset the state machine.
+- *
+- * This scheme is necessary, instead of clearing the Valid bit in the
+- * IMAP register, to handle the case of IMAP registers being shared by
+- * multiple INOs (and thus ICLR registers).  Since we use a different
+- * virtual IRQ for each shared IMAP instance, the generic code thinks
+- * there is only one user so it prematurely calls ->disable() on
+- * free_irq().
+- *
+- * We have to provide an explicit ->disable() method instead of using
+- * NULL to get the default.  The reason is that if the generic code
+- * sees that, it also hooks up a default ->shutdown method which
+- * invokes ->mask() which we do not want.  See irq_chip_set_defaults().
+- */
+ static void sun4u_irq_disable(unsigned int virt_irq)
+ {
++      struct irq_handler_data *data = get_irq_chip_data(virt_irq);
++
++      if (likely(data)) {
++              unsigned long imap = data->imap;
++              unsigned long tmp = upa_readq(imap);
++
++              tmp &= ~IMAP_VALID;
++              upa_writeq(tmp, imap);
++      }
+ }
+ static void sun4u_irq_eoi(unsigned int virt_irq)
+@@ -754,8 +741,7 @@
+               desc = irq_desc + virt_irq;
+-              if (!(desc->status & IRQ_DISABLED))
+-                      desc->handle_irq(virt_irq, desc);
++              desc->handle_irq(virt_irq, desc);
+               bucket_pa = next_pa;
+       }
+@@ -792,6 +778,69 @@
+       local_irq_restore(flags);
+ }
++static void unhandled_perf_irq(struct pt_regs *regs)
++{
++      unsigned long pcr, pic;
++
++      read_pcr(pcr);
++      read_pic(pic);
++
++      write_pcr(0);
++
++      printk(KERN_EMERG "CPU %d: Got unexpected perf counter IRQ.\n",
++             smp_processor_id());
++      printk(KERN_EMERG "CPU %d: PCR[%016lx] PIC[%016lx]\n",
++             smp_processor_id(), pcr, pic);
++}
++
++/* Almost a direct copy of the powerpc PMC code.  */
++static DEFINE_SPINLOCK(perf_irq_lock);
++static void *perf_irq_owner_caller; /* mostly for debugging */
++static void (*perf_irq)(struct pt_regs *regs) = unhandled_perf_irq;
++
++/* Invoked from level 15 PIL handler in trap table.  */
++void perfctr_irq(int irq, struct pt_regs *regs)
++{
++      clear_softint(1 << irq);
++      perf_irq(regs);
++}
++
++int register_perfctr_intr(void (*handler)(struct pt_regs *))
++{
++      int ret;
++
++      if (!handler)
++              return -EINVAL;
++
++      spin_lock(&perf_irq_lock);
++      if (perf_irq != unhandled_perf_irq) {
++              printk(KERN_WARNING "register_perfctr_intr: "
++                     "perf IRQ busy (reserved by caller %p)\n",
++                     perf_irq_owner_caller);
++              ret = -EBUSY;
++              goto out;
++      }
++
++      perf_irq_owner_caller = __builtin_return_address(0);
++      perf_irq = handler;
++
++      ret = 0;
++out:
++      spin_unlock(&perf_irq_lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(register_perfctr_intr);
++
++void release_perfctr_intr(void (*handler)(struct pt_regs *))
++{
++      spin_lock(&perf_irq_lock);
++      perf_irq_owner_caller = NULL;
++      perf_irq = unhandled_perf_irq;
++      spin_unlock(&perf_irq_lock);
++}
++EXPORT_SYMBOL_GPL(release_perfctr_intr);
++
+ #ifdef CONFIG_HOTPLUG_CPU
+ void fixup_irqs(void)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/kernel.h linux-2.6.29-rc3.owrt/arch/sparc/kernel/kernel.h
+--- linux-2.6.29.owrt/arch/sparc/kernel/kernel.h       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/kernel.h   2009-05-10 23:48:28.000000000 +0200
+@@ -5,7 +5,6 @@
+ /* cpu.c */
+ extern const char *sparc_cpu_type;
+-extern const char *sparc_pmu_type;
+ extern const char *sparc_fpu_type;
+ extern unsigned int fsr_storage;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/kgdb_64.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/kgdb_64.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/kgdb_64.c      2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/kgdb_64.c  2009-05-10 23:48:28.000000000 +0200
+@@ -108,7 +108,7 @@
+ }
+ #ifdef CONFIG_SMP
+-void smp_kgdb_capture_client(int irq, struct pt_regs *regs)
++void smp_kgdb_capture_client(struct pt_regs *regs)
+ {
+       unsigned long flags;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/Makefile linux-2.6.29-rc3.owrt/arch/sparc/kernel/Makefile
+--- linux-2.6.29.owrt/arch/sparc/kernel/Makefile       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/Makefile   2009-05-10 23:48:28.000000000 +0200
+@@ -52,8 +52,6 @@
+ obj-$(CONFIG_SPARC64)   += hvapi.o
+ obj-$(CONFIG_SPARC64)   += sstate.o
+ obj-$(CONFIG_SPARC64)   += mdesc.o
+-obj-$(CONFIG_SPARC64) += pcr.o
+-obj-$(CONFIG_SPARC64) += nmi.o
+ # sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
+ obj-$(CONFIG_SPARC32)     += devres.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/nmi.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/nmi.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/nmi.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/nmi.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,225 +0,0 @@
+-/* Pseudo NMI support on sparc64 systems.
+- *
+- * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+- *
+- * The NMI watchdog support and infrastructure is based almost
+- * entirely upon the x86 NMI support code.
+- */
+-#include <linux/kernel.h>
+-#include <linux/param.h>
+-#include <linux/init.h>
+-#include <linux/percpu.h>
+-#include <linux/nmi.h>
+-#include <linux/module.h>
+-#include <linux/kprobes.h>
+-#include <linux/kernel_stat.h>
+-#include <linux/slab.h>
+-#include <linux/kdebug.h>
+-#include <linux/delay.h>
+-#include <linux/smp.h>
+-
+-#include <asm/ptrace.h>
+-#include <asm/local.h>
+-#include <asm/pcr.h>
+-
+-/* We don't have a real NMI on sparc64, but we can fake one
+- * up using profiling counter overflow interrupts and interrupt
+- * levels.
+- *
+- * The profile overflow interrupts at level 15, so we use
+- * level 14 as our IRQ off level.
+- */
+-
+-static int nmi_watchdog_active;
+-static int panic_on_timeout;
+-
+-int nmi_usable;
+-EXPORT_SYMBOL_GPL(nmi_usable);
+-
+-static unsigned int nmi_hz = HZ;
+-
+-static DEFINE_PER_CPU(unsigned int, last_irq_sum);
+-static DEFINE_PER_CPU(local_t, alert_counter);
+-static DEFINE_PER_CPU(int, nmi_touch);
+-
+-void touch_nmi_watchdog(void)
+-{
+-      if (nmi_watchdog_active) {
+-              int cpu;
+-
+-              for_each_present_cpu(cpu) {
+-                      if (per_cpu(nmi_touch, cpu) != 1)
+-                              per_cpu(nmi_touch, cpu) = 1;
+-              }
+-      }
+-
+-      touch_softlockup_watchdog();
+-}
+-EXPORT_SYMBOL(touch_nmi_watchdog);
+-
+-static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
+-{
+-      if (notify_die(DIE_NMIWATCHDOG, str, regs, 0,
+-                     pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
+-              return;
+-
+-      console_verbose();
+-      bust_spinlocks(1);
+-
+-      printk(KERN_EMERG "%s", str);
+-      printk(" on CPU%d, ip %08lx, registers:\n",
+-             smp_processor_id(), regs->tpc);
+-      show_regs(regs);
+-      dump_stack();
+-
+-      bust_spinlocks(0);
+-
+-      if (do_panic || panic_on_oops)
+-              panic("Non maskable interrupt");
+-
+-      local_irq_enable();
+-      do_exit(SIGBUS);
+-}
+-
+-notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
+-{
+-      unsigned int sum, touched = 0;
+-      int cpu = smp_processor_id();
+-
+-      clear_softint(1 << irq);
+-      pcr_ops->write(PCR_PIC_PRIV);
+-
+-      local_cpu_data().__nmi_count++;
+-
+-      if (notify_die(DIE_NMI, "nmi", regs, 0,
+-                     pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
+-              touched = 1;
+-
+-      sum = kstat_irqs_cpu(0, cpu);
+-      if (__get_cpu_var(nmi_touch)) {
+-              __get_cpu_var(nmi_touch) = 0;
+-              touched = 1;
+-      }
+-      if (!touched && __get_cpu_var(last_irq_sum) == sum) {
+-              local_inc(&__get_cpu_var(alert_counter));
+-              if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+-                      die_nmi("BUG: NMI Watchdog detected LOCKUP",
+-                              regs, panic_on_timeout);
+-      } else {
+-              __get_cpu_var(last_irq_sum) = sum;
+-              local_set(&__get_cpu_var(alert_counter), 0);
+-      }
+-      if (nmi_usable) {
+-              write_pic(picl_value(nmi_hz));
+-              pcr_ops->write(pcr_enable);
+-      }
+-}
+-
+-static inline unsigned int get_nmi_count(int cpu)
+-{
+-      return cpu_data(cpu).__nmi_count;
+-}
+-
+-static int endflag __initdata;
+-
+-static __init void nmi_cpu_busy(void *data)
+-{
+-      local_irq_enable_in_hardirq();
+-      while (endflag == 0)
+-              mb();
+-}
+-
+-static void report_broken_nmi(int cpu, int *prev_nmi_count)
+-{
+-      printk(KERN_CONT "\n");
+-
+-      printk(KERN_WARNING
+-              "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+-                      cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+-
+-      printk(KERN_WARNING
+-              "Please report this to bugzilla.kernel.org,\n");
+-      printk(KERN_WARNING
+-              "and attach the output of the 'dmesg' command.\n");
+-
+-      nmi_usable = 0;
+-}
+-
+-static void stop_watchdog(void *unused)
+-{
+-      pcr_ops->write(PCR_PIC_PRIV);
+-}
+-
+-static int __init check_nmi_watchdog(void)
+-{
+-      unsigned int *prev_nmi_count;
+-      int cpu, err;
+-
+-      prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
+-      if (!prev_nmi_count) {
+-              err = -ENOMEM;
+-              goto error;
+-      }
+-
+-      printk(KERN_INFO "Testing NMI watchdog ... ");
+-
+-      smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
+-
+-      for_each_possible_cpu(cpu)
+-              prev_nmi_count[cpu] = get_nmi_count(cpu);
+-      local_irq_enable();
+-      mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
+-
+-      for_each_online_cpu(cpu) {
+-              if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+-                      report_broken_nmi(cpu, prev_nmi_count);
+-      }
+-      endflag = 1;
+-      if (!nmi_usable) {
+-              kfree(prev_nmi_count);
+-              err = -ENODEV;
+-              goto error;
+-      }
+-      printk("OK.\n");
+-
+-      nmi_hz = 1;
+-
+-      kfree(prev_nmi_count);
+-      return 0;
+-error:
+-      on_each_cpu(stop_watchdog, NULL, 1);
+-      return err;
+-}
+-
+-static void start_watchdog(void *unused)
+-{
+-      pcr_ops->write(PCR_PIC_PRIV);
+-      write_pic(picl_value(nmi_hz));
+-
+-      pcr_ops->write(pcr_enable);
+-}
+-
+-void nmi_adjust_hz(unsigned int new_hz)
+-{
+-      nmi_hz = new_hz;
+-      on_each_cpu(start_watchdog, NULL, 1);
+-}
+-EXPORT_SYMBOL_GPL(nmi_adjust_hz);
+-
+-int __init nmi_init(void)
+-{
+-      nmi_usable = 1;
+-
+-      on_each_cpu(start_watchdog, NULL, 1);
+-
+-      return check_nmi_watchdog();
+-}
+-
+-static int __init setup_nmi_watchdog(char *str)
+-{
+-      if (!strncmp(str, "panic", 5))
+-              panic_on_timeout = 1;
+-
+-      return 0;
+-}
+-__setup("nmi_watchdog=", setup_nmi_watchdog);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/pci_common.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/pci_common.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/pci_common.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/pci_common.c       2009-05-10 23:48:28.000000000 +0200
+@@ -368,7 +368,7 @@
+       const u32 *vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+       if (vdma) {
+-              struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
++              struct resource *rp = kmalloc(sizeof(*rp), GFP_KERNEL);
+               if (!rp) {
+                       prom_printf("Cannot allocate IOMMU resource.\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/pcr.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/pcr.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/pcr.c  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/pcr.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,158 +0,0 @@
+-/* pcr.c: Generic sparc64 performance counter infrastructure.
+- *
+- * Copyright (C) 2009 David S. Miller (davem@davemloft.net)
+- */
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/init.h>
+-#include <linux/irq.h>
+-
+-#include <asm/pil.h>
+-#include <asm/pcr.h>
+-#include <asm/nmi.h>
+-
+-/* This code is shared between various users of the performance
+- * counters.  Users will be oprofile, pseudo-NMI watchdog, and the
+- * perf_counter support layer.
+- */
+-
+-#define PCR_SUN4U_ENABLE      (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
+-#define PCR_N2_ENABLE         (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \
+-                               PCR_N2_TOE_OV1 | \
+-                               (2 << PCR_N2_SL1_SHIFT) | \
+-                               (0xff << PCR_N2_MASK1_SHIFT))
+-
+-u64 pcr_enable;
+-unsigned int picl_shift;
+-
+-/* Performance counter interrupts run unmasked at PIL level 15.
+- * Therefore we can't do things like wakeups and other work
+- * that expects IRQ disabling to be adhered to in locking etc.
+- *
+- * Therefore in such situations we defer the work by signalling
+- * a lower level cpu IRQ.
+- */
+-void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
+-{
+-      clear_softint(1 << PIL_DEFERRED_PCR_WORK);
+-}
+-
+-void schedule_deferred_pcr_work(void)
+-{
+-      set_softint(1 << PIL_DEFERRED_PCR_WORK);
+-}
+-
+-const struct pcr_ops *pcr_ops;
+-EXPORT_SYMBOL_GPL(pcr_ops);
+-
+-static u64 direct_pcr_read(void)
+-{
+-      u64 val;
+-
+-      read_pcr(val);
+-      return val;
+-}
+-
+-static void direct_pcr_write(u64 val)
+-{
+-      write_pcr(val);
+-}
+-
+-static const struct pcr_ops direct_pcr_ops = {
+-      .read   = direct_pcr_read,
+-      .write  = direct_pcr_write,
+-};
+-
+-static void n2_pcr_write(u64 val)
+-{
+-      unsigned long ret;
+-
+-      ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val);
+-      if (val != HV_EOK)
+-              write_pcr(val);
+-}
+-
+-static const struct pcr_ops n2_pcr_ops = {
+-      .read   = direct_pcr_read,
+-      .write  = n2_pcr_write,
+-};
+-
+-static unsigned long perf_hsvc_group;
+-static unsigned long perf_hsvc_major;
+-static unsigned long perf_hsvc_minor;
+-
+-static int __init register_perf_hsvc(void)
+-{
+-      if (tlb_type == hypervisor) {
+-              switch (sun4v_chip_type) {
+-              case SUN4V_CHIP_NIAGARA1:
+-                      perf_hsvc_group = HV_GRP_NIAG_PERF;
+-                      break;
+-
+-              case SUN4V_CHIP_NIAGARA2:
+-                      perf_hsvc_group = HV_GRP_N2_CPU;
+-                      break;
+-
+-              default:
+-                      return -ENODEV;
+-              }
+-
+-
+-              perf_hsvc_major = 1;
+-              perf_hsvc_minor = 0;
+-              if (sun4v_hvapi_register(perf_hsvc_group,
+-                                       perf_hsvc_major,
+-                                       &perf_hsvc_minor)) {
+-                      printk("perfmon: Could not register hvapi.\n");
+-                      return -ENODEV;
+-              }
+-      }
+-      return 0;
+-}
+-
+-static void __init unregister_perf_hsvc(void)
+-{
+-      if (tlb_type != hypervisor)
+-              return;
+-      sun4v_hvapi_unregister(perf_hsvc_group);
+-}
+-
+-int __init pcr_arch_init(void)
+-{
+-      int err = register_perf_hsvc();
+-
+-      if (err)
+-              return err;
+-
+-      switch (tlb_type) {
+-      case hypervisor:
+-              pcr_ops = &n2_pcr_ops;
+-              pcr_enable = PCR_N2_ENABLE;
+-              picl_shift = 2;
+-              break;
+-
+-      case cheetah:
+-      case cheetah_plus:
+-              pcr_ops = &direct_pcr_ops;
+-              pcr_enable = PCR_SUN4U_ENABLE;
+-              break;
+-
+-      case spitfire:
+-              /* UltraSPARC-I/II and derivatives lack a profile
+-               * counter overflow interrupt so we can't make use of
+-               * their hardware currently.
+-               */
+-              /* fallthrough */
+-      default:
+-              err = -ENODEV;
+-              goto out_unregister;
+-      }
+-
+-      return nmi_init();
+-
+-out_unregister:
+-      unregister_perf_hsvc();
+-      return err;
+-}
+-
+-arch_initcall(pcr_arch_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/process_64.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/process_64.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/process_64.c   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/process_64.c       2009-05-10 23:48:28.000000000 +0200
+@@ -29,7 +29,6 @@
+ #include <linux/cpu.h>
+ #include <linux/elfcore.h>
+ #include <linux/sysrq.h>
+-#include <linux/nmi.h>
+ #include <asm/uaccess.h>
+ #include <asm/system.h>
+@@ -53,10 +52,8 @@
+ static void sparc64_yield(int cpu)
+ {
+-      if (tlb_type != hypervisor) {
+-              touch_nmi_watchdog();
++      if (tlb_type != hypervisor)
+               return;
+-      }
+       clear_thread_flag(TIF_POLLING_NRFLAG);
+       smp_mb__after_clear_bit();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/setup_64.c linux-2.6.29-rc3.owrt/arch/sparc/kernel/setup_64.c
+--- linux-2.6.29.owrt/arch/sparc/kernel/setup_64.c     2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/setup_64.c 2009-05-10 23:48:28.000000000 +0200
+@@ -354,7 +354,6 @@
+       seq_printf(m, 
+                  "cpu\t\t: %s\n"
+                  "fpu\t\t: %s\n"
+-                 "pmu\t\t: %s\n"
+                  "prom\t\t: %s\n"
+                  "type\t\t: %s\n"
+                  "ncpus probed\t: %d\n"
+@@ -367,7 +366,6 @@
+                  ,
+                  sparc_cpu_type,
+                  sparc_fpu_type,
+-                 sparc_pmu_type,
+                  prom_version,
+                  ((tlb_type == hypervisor) ?
+                   "sun4v" :
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/kernel/ttable.S linux-2.6.29-rc3.owrt/arch/sparc/kernel/ttable.S
+--- linux-2.6.29.owrt/arch/sparc/kernel/ttable.S       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/kernel/ttable.S   2009-05-10 23:48:28.000000000 +0200
+@@ -63,13 +63,7 @@
+ #else
+ tl0_irq6:     BTRAP(0x46)
+ #endif
+-tl0_irq7:     TRAP_IRQ(deferred_pcr_work_irq, 7)
+-#ifdef CONFIG_KGDB
+-tl0_irq8:     TRAP_IRQ(smp_kgdb_capture_client, 8)
+-#else
+-tl0_irq8:     BTRAP(0x48)
+-#endif
+-tl0_irq9:     BTRAP(0x49)
++tl0_irq7:     BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+ tl0_irq10:    BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
+ tl0_irq14:    TRAP_IRQ(timer_interrupt, 14)
+ tl0_irq15:    TRAP_NMI_IRQ(perfctr_irq, 15)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/bzero.S linux-2.6.29-rc3.owrt/arch/sparc/lib/bzero.S
+--- linux-2.6.29.owrt/arch/sparc/lib/bzero.S   2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/bzero.S       2009-05-10 23:48:28.000000000 +0200
+@@ -88,9 +88,13 @@
+ #define EX_ST(x,y)            \
+ 98:   x,y;                    \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    %o1, %o0;       \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_o1;   \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/copy_in_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/copy_in_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/copy_in_user.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/copy_in_user.S        2009-05-10 23:48:28.000000000 +0200
+@@ -3,16 +3,19 @@
+  * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com)
+  */
+-#include <linux/linkage.h>
+ #include <asm/asi.h>
+ #define XCC xcc
+ #define EX(x,y)                       \
+ 98:   x,y;                    \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov 1, %o0;            \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -28,7 +31,18 @@
+        * to copy register windows around during thread cloning.
+        */
+-ENTRY(___copy_in_user)        /* %o0=dst, %o1=src, %o2=len */
++      .globl          ___copy_in_user
++      .type           ___copy_in_user,#function
++___copy_in_user:      /* %o0=dst, %o1=src, %o2=len */
++      /* Writing to %asi is _expensive_ so we hardcode it.
++       * Reading %asi to check for KERNEL_DS is comparatively
++       * cheap.
++       */
++      rd              %asi, %g1
++      cmp             %g1, ASI_AIUS
++      bne,pn          %icc, memcpy_user_stub
++       nop
++
+       cmp             %o2, 0
+       be,pn           %XCC, 85f
+        or             %o0, %o1, %o3
+@@ -39,24 +53,22 @@
+       /* 16 < len <= 64 */
+       andcc           %o3, 0x7, %g0
+       bne,pn          %XCC, 90f
+-       nop
++       sub            %o0, %o1, %o3
+       andn            %o2, 0x7, %o4
+       and             %o2, 0x7, %o2
+ 1:    subcc           %o4, 0x8, %o4
+       EX(ldxa [%o1] %asi, %o5)
+-      EX(stxa %o5, [%o0] %asi)
+-      add             %o1, 0x8, %o1
++      EX(stxa %o5, [%o1 + %o3] ASI_AIUS)
+       bgu,pt          %XCC, 1b
+-       add            %o0, 0x8, %o0
++       add            %o1, 0x8, %o1
+       andcc           %o2, 0x4, %g0
+       be,pt           %XCC, 1f
+        nop
+       sub             %o2, 0x4, %o2
+       EX(lduwa [%o1] %asi, %o5)
+-      EX(stwa %o5, [%o0] %asi)
++      EX(stwa %o5, [%o1 + %o3] ASI_AIUS)
+       add             %o1, 0x4, %o1
+-      add             %o0, 0x4, %o0
+ 1:    cmp             %o2, 0
+       be,pt           %XCC, 85f
+        nop
+@@ -66,15 +78,14 @@
+ 80:   /* 0 < len <= 16 */
+       andcc           %o3, 0x3, %g0
+       bne,pn          %XCC, 90f
+-       nop
++       sub            %o0, %o1, %o3
+ 82:
+       subcc           %o2, 4, %o2
+       EX(lduwa [%o1] %asi, %g1)
+-      EX(stwa %g1, [%o0] %asi)
+-      add             %o1, 4, %o1
++      EX(stwa %g1, [%o1 + %o3] ASI_AIUS)
+       bgu,pt          %XCC, 82b
+-       add            %o0, 4, %o0
++       add            %o1, 4, %o1
+ 85:   retl
+        clr            %o0
+@@ -83,10 +94,26 @@
+ 90:
+       subcc           %o2, 1, %o2
+       EX(lduba [%o1] %asi, %g1)
+-      EX(stba %g1, [%o0] %asi)
+-      add             %o1, 1, %o1
++      EX(stba %g1, [%o1 + %o3] ASI_AIUS)
+       bgu,pt          %XCC, 90b
+-       add            %o0, 1, %o0
++       add            %o1, 1, %o1
+       retl
+        clr            %o0
+-ENDPROC(___copy_in_user)
++
++      .size           ___copy_in_user, .-___copy_in_user
++
++      /* Act like copy_{to,in}_user(), ie. return zero instead
++       * of original destination pointer.  This is invoked when
++       * copy_{to,in}_user() finds that %asi is kernel space.
++       */
++      .globl          memcpy_user_stub
++      .type           memcpy_user_stub,#function
++memcpy_user_stub:
++      save            %sp, -192, %sp
++      mov             %i0, %o0
++      mov             %i1, %o1
++      call            memcpy
++       mov            %i2, %o2
++      ret
++       restore        %g0, %g0, %o0
++      .size           memcpy_user_stub, .-memcpy_user_stub
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/GENbzero.S linux-2.6.29-rc3.owrt/arch/sparc/lib/GENbzero.S
+--- linux-2.6.29.owrt/arch/sparc/lib/GENbzero.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/GENbzero.S    2009-05-10 23:48:28.000000000 +0200
+@@ -6,9 +6,13 @@
+ #define EX_ST(x,y)            \
+ 98:   x,y;                    \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    %o1, %o0;       \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_o1;   \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/GENcopy_from_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/GENcopy_from_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/GENcopy_from_user.S       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/GENcopy_from_user.S   2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_LD(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -23,7 +27,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/GENcopy_to_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/GENcopy_to_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/GENcopy_to_user.S 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/GENcopy_to_user.S     2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_ST(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -27,7 +31,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/NG2copy_from_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/NG2copy_from_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/NG2copy_from_user.S       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/NG2copy_from_user.S   2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,14 @@
+ #define EX_LD(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   wr      %g0, ASI_AIUS, %asi;\
++      retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one_asi;\
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -28,7 +33,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/NG2copy_to_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/NG2copy_to_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/NG2copy_to_user.S 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/NG2copy_to_user.S     2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,14 @@
+ #define EX_ST(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   wr      %g0, ASI_AIUS, %asi;\
++      retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one_asi;\
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -37,7 +42,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/NGbzero.S linux-2.6.29-rc3.owrt/arch/sparc/lib/NGbzero.S
+--- linux-2.6.29.owrt/arch/sparc/lib/NGbzero.S 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/NGbzero.S     2009-05-10 23:48:28.000000000 +0200
+@@ -6,9 +6,13 @@
+ #define EX_ST(x,y)            \
+ 98:   x,y;                    \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    %o1, %o0;       \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_o1;   \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/NGcopy_from_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/NGcopy_from_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/NGcopy_from_user.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/NGcopy_from_user.S    2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,14 @@
+ #define EX_LD(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   wr      %g0, ASI_AIUS, %asi;\
++      ret;                    \
++       restore %g0, 1, %o0;   \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __ret_one_asi;\
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -25,7 +30,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/NGcopy_to_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/NGcopy_to_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/NGcopy_to_user.S  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/NGcopy_to_user.S      2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,14 @@
+ #define EX_ST(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   wr      %g0, ASI_AIUS, %asi;\
++      ret;                    \
++       restore %g0, 1, %o0;   \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __ret_one_asi;\
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -28,7 +33,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/U1copy_from_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/U1copy_from_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/U1copy_from_user.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/U1copy_from_user.S    2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_LD(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -23,7 +27,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop;                                           \
+ #include "U1memcpy.S"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/U1copy_to_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/U1copy_to_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/U1copy_to_user.S  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/U1copy_to_user.S      2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_ST(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -23,7 +27,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop;                                           \
+ #include "U1memcpy.S"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/U3copy_from_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/U3copy_from_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/U3copy_from_user.S        2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/U3copy_from_user.S    2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_LD(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/lib/U3copy_to_user.S linux-2.6.29-rc3.owrt/arch/sparc/lib/U3copy_to_user.S
+--- linux-2.6.29.owrt/arch/sparc/lib/U3copy_to_user.S  2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/lib/U3copy_to_user.S      2009-05-10 23:48:28.000000000 +0200
+@@ -5,9 +5,13 @@
+ #define EX_ST(x)              \
+ 98:   x;                      \
++      .section .fixup;        \
++      .align 4;               \
++99:   retl;                   \
++       mov    1, %o0;         \
+       .section __ex_table,"a";\
+       .align 4;               \
+-      .word 98b, __retl_one;  \
++      .word 98b, 99b;         \
+       .text;                  \
+       .align 4;
+@@ -23,7 +27,7 @@
+ #define PREAMBLE                                      \
+       rd              %asi, %g1;                      \
+       cmp             %g1, ASI_AIUS;                  \
+-      bne,pn          %icc, ___copy_in_user;          \
++      bne,pn          %icc, memcpy_user_stub;         \
+        nop;                                           \
+ #include "U3memcpy.S"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/mm/fault_64.c linux-2.6.29-rc3.owrt/arch/sparc/mm/fault_64.c
+--- linux-2.6.29.owrt/arch/sparc/mm/fault_64.c 2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/mm/fault_64.c     2009-05-10 23:48:28.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/interrupt.h>
+ #include <linux/kprobes.h>
+ #include <linux/kdebug.h>
+-#include <linux/percpu.h>
+ #include <asm/page.h>
+ #include <asm/pgtable.h>
+@@ -225,30 +224,6 @@
+       unhandled_fault (address, current, regs);
+ }
+-static void noinline bogus_32bit_fault_tpc(struct pt_regs *regs)
+-{
+-      static int times;
+-
+-      if (times++ < 10)
+-              printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
+-                     "64-bit TPC [%lx]\n",
+-                     current->comm, current->pid,
+-                     regs->tpc);
+-      show_regs(regs);
+-}
+-
+-static void noinline bogus_32bit_fault_address(struct pt_regs *regs,
+-                                             unsigned long addr)
+-{
+-      static int times;
+-
+-      if (times++ < 10)
+-              printk(KERN_ERR "FAULT[%s:%d]: 32-bit process "
+-                     "reports 64-bit fault address [%lx]\n",
+-                     current->comm, current->pid, addr);
+-      show_regs(regs);
+-}
+-
+ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
+ {
+       struct mm_struct *mm = current->mm;
+@@ -269,19 +244,6 @@
+           (fault_code & FAULT_CODE_DTLB))
+               BUG();
+-      if (test_thread_flag(TIF_32BIT)) {
+-              if (!(regs->tstate & TSTATE_PRIV)) {
+-                      if (unlikely((regs->tpc >> 32) != 0)) {
+-                              bogus_32bit_fault_tpc(regs);
+-                              goto intr_or_no_mm;
+-                      }
+-              }
+-              if (unlikely((address >> 32) != 0)) {
+-                      bogus_32bit_fault_address(regs, address);
+-                      goto intr_or_no_mm;
+-              }
+-      }
+-
+       if (regs->tstate & TSTATE_PRIV) {
+               unsigned long tpc = regs->tpc;
+@@ -302,6 +264,12 @@
+       if (in_atomic() || !mm)
+               goto intr_or_no_mm;
++      if (test_thread_flag(TIF_32BIT)) {
++              if (!(regs->tstate & TSTATE_PRIV))
++                      regs->tpc &= 0xffffffff;
++              address &= 0xffffffff;
++      }
++
+       if (!down_read_trylock(&mm->mmap_sem)) {
+               if ((regs->tstate & TSTATE_PRIV) &&
+                   !search_exception_tables(regs->tpc)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/mm/ultra.S linux-2.6.29-rc3.owrt/arch/sparc/mm/ultra.S
+--- linux-2.6.29.owrt/arch/sparc/mm/ultra.S    2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/mm/ultra.S        2009-05-10 23:48:28.000000000 +0200
+@@ -679,8 +679,28 @@
+ #ifdef CONFIG_KGDB
+       .globl          xcall_kgdb_capture
+ xcall_kgdb_capture:
+-      wr              %g0, (1 << PIL_KGDB_CAPTURE), %set_softint
+-      retry
++661:  rdpr            %pstate, %g2
++      wrpr            %g2, PSTATE_IG | PSTATE_AG, %pstate
++      .section        .sun4v_2insn_patch, "ax"
++      .word           661b
++      nop
++      nop
++      .previous
++
++      rdpr            %pil, %g2
++      wrpr            %g0, PIL_NORMAL_MAX, %pil
++      sethi           %hi(109f), %g7
++      ba,pt           %xcc, etrap_irq
++109:   or             %g7, %lo(109b), %g7
++#ifdef CONFIG_TRACE_IRQFLAGS
++      call            trace_hardirqs_off
++       nop
++#endif
++      call            smp_kgdb_capture_client
++       add            %sp, PTREGS_OFF, %o0
++      /* Has to be a non-v9 branch due to the large distance. */
++      ba              rtrap_xcall
++       ldx            [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
+ #endif
+ #endif /* CONFIG_SMP */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/sparc/oprofile/init.c linux-2.6.29-rc3.owrt/arch/sparc/oprofile/init.c
+--- linux-2.6.29.owrt/arch/sparc/oprofile/init.c       2009-05-10 22:04:40.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/sparc/oprofile/init.c   2009-05-10 23:48:28.000000000 +0200
+@@ -13,57 +13,217 @@
+ #include <linux/init.h>
+  
+ #ifdef CONFIG_SPARC64
+-#include <linux/notifier.h>
+-#include <linux/rcupdate.h>
+-#include <linux/kdebug.h>
+-#include <asm/nmi.h>
+-
+-static int profile_timer_exceptions_notify(struct notifier_block *self,
+-                                         unsigned long val, void *data)
+-{
+-      struct die_args *args = (struct die_args *)data;
+-      int ret = NOTIFY_DONE;
+-
+-      switch (val) {
+-      case DIE_NMI:
+-              oprofile_add_sample(args->regs, 0);
+-              ret = NOTIFY_STOP;
+-              break;
+-      default:
+-              break;
+-      }
+-      return ret;
++#include <asm/hypervisor.h>
++#include <asm/spitfire.h>
++#include <asm/cpudata.h>
++#include <asm/irq.h>
++
++static int nmi_enabled;
++
++struct pcr_ops {
++      u64 (*read)(void);
++      void (*write)(u64);
++};
++static const struct pcr_ops *pcr_ops;
++
++static u64 direct_pcr_read(void)
++{
++      u64 val;
++
++      read_pcr(val);
++      return val;
++}
++
++static void direct_pcr_write(u64 val)
++{
++      write_pcr(val);
+ }
+-static struct notifier_block profile_timer_exceptions_nb = {
+-      .notifier_call  = profile_timer_exceptions_notify,
++static const struct pcr_ops direct_pcr_ops = {
++      .read   = direct_pcr_read,
++      .write  = direct_pcr_write,
+ };
+-static int timer_start(void)
++static void n2_pcr_write(u64 val)
+ {
+-      if (register_die_notifier(&profile_timer_exceptions_nb))
+-              return 1;
+-      nmi_adjust_hz(HZ);
+-      return 0;
++      unsigned long ret;
++
++      ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val);
++      if (val != HV_EOK)
++              write_pcr(val);
+ }
++static const struct pcr_ops n2_pcr_ops = {
++      .read   = direct_pcr_read,
++      .write  = n2_pcr_write,
++};
+-static void timer_stop(void)
++/* In order to commonize as much of the implementation as
++ * possible, we use PICH as our counter.  Mostly this is
++ * to accomodate Niagara-1 which can only count insn cycles
++ * in PICH.
++ */
++static u64 picl_value(void)
++{
++      u32 delta = local_cpu_data().clock_tick / HZ;
++
++      return ((u64)((0 - delta) & 0xffffffff)) << 32;
++}
++
++#define PCR_PIC_PRIV          0x00000001 /* PIC access is privileged */
++#define PCR_STRACE            0x00000002 /* Trace supervisor events  */
++#define PCR_UTRACE            0x00000004 /* Trace user events        */
++#define PCR_N2_HTRACE         0x00000008 /* Trace hypervisor events  */
++#define PCR_N2_TOE_OV0                0x00000010 /* Trap if PIC 0 overflows  */
++#define PCR_N2_TOE_OV1                0x00000020 /* Trap if PIC 1 overflows  */
++#define PCR_N2_MASK0          0x00003fc0
++#define PCR_N2_MASK0_SHIFT    6
++#define PCR_N2_SL0            0x0003c000
++#define PCR_N2_SL0_SHIFT      14
++#define PCR_N2_OV0            0x00040000
++#define PCR_N2_MASK1          0x07f80000
++#define PCR_N2_MASK1_SHIFT    19
++#define PCR_N2_SL1            0x78000000
++#define PCR_N2_SL1_SHIFT      27
++#define PCR_N2_OV1            0x80000000
++
++#define PCR_SUN4U_ENABLE      (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
++#define PCR_N2_ENABLE         (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \
++                               PCR_N2_TOE_OV1 | \
++                               (2 << PCR_N2_SL1_SHIFT) | \
++                               (0xff << PCR_N2_MASK1_SHIFT))
++
++static u64 pcr_enable = PCR_SUN4U_ENABLE;
++
++static void nmi_handler(struct pt_regs *regs)
+ {
+-      nmi_adjust_hz(1);
+-      unregister_die_notifier(&profile_timer_exceptions_nb);
+-      synchronize_sched();  /* Allow already-started NMIs to complete. */
++      pcr_ops->write(PCR_PIC_PRIV);
++
++      if (nmi_enabled) {
++              oprofile_add_sample(regs, 0);
++
++              write_pic(picl_value());
++              pcr_ops->write(pcr_enable);
++      }
++}
++
++/* We count "clock cycle" events in the lower 32-bit PIC.
++ * Then configure it such that it overflows every HZ, and thus
++ * generates a level 15 interrupt at that frequency.
++ */
++static void cpu_nmi_start(void *_unused)
++{
++      pcr_ops->write(PCR_PIC_PRIV);
++      write_pic(picl_value());
++
++      pcr_ops->write(pcr_enable);
++}
++
++static void cpu_nmi_stop(void *_unused)
++{
++      pcr_ops->write(PCR_PIC_PRIV);
++}
++
++static int nmi_start(void)
++{
++      int err = register_perfctr_intr(nmi_handler);
++
++      if (!err) {
++              nmi_enabled = 1;
++              wmb();
++              err = on_each_cpu(cpu_nmi_start, NULL, 1);
++              if (err) {
++                      nmi_enabled = 0;
++                      wmb();
++                      on_each_cpu(cpu_nmi_stop, NULL, 1);
++                      release_perfctr_intr(nmi_handler);
++              }
++      }
++
++      return err;
+ }
+-static int op_nmi_timer_init(struct oprofile_operations *ops)
++static void nmi_stop(void)
+ {
+-      if (!nmi_usable)
++      nmi_enabled = 0;
++      wmb();
++
++      on_each_cpu(cpu_nmi_stop, NULL, 1);
++      release_perfctr_intr(nmi_handler);
++      synchronize_sched();
++}
++
++static unsigned long perf_hsvc_group;
++static unsigned long perf_hsvc_major;
++static unsigned long perf_hsvc_minor;
++
++static int __init register_perf_hsvc(void)
++{
++      if (tlb_type == hypervisor) {
++              switch (sun4v_chip_type) {
++              case SUN4V_CHIP_NIAGARA1:
++                      perf_hsvc_group = HV_GRP_NIAG_PERF;
++                      break;
++
++              case SUN4V_CHIP_NIAGARA2:
++                      perf_hsvc_group = HV_GRP_N2_CPU;
++                      break;
++
++              default:
++                      return -ENODEV;
++              }
++
++
++              perf_hsvc_major = 1;
++              perf_hsvc_minor = 0;
++              if (sun4v_hvapi_register(perf_hsvc_group,
++                                       perf_hsvc_major,
++                                       &perf_hsvc_minor)) {
++                      printk("perfmon: Could not register N2 hvapi.\n");
++                      return -ENODEV;
++              }
++      }
++      return 0;
++}
++
++static void unregister_perf_hsvc(void)
++{
++      if (tlb_type != hypervisor)
++              return;
++      sun4v_hvapi_unregister(perf_hsvc_group);
++}
++
++static int oprofile_nmi_init(struct oprofile_operations *ops)
++{
++      int err = register_perf_hsvc();
++
++      if (err)
++              return err;
++
++      switch (tlb_type) {
++      case hypervisor:
++              pcr_ops = &n2_pcr_ops;
++              pcr_enable = PCR_N2_ENABLE;
++              break;
++
++      case cheetah:
++      case cheetah_plus:
++              pcr_ops = &direct_pcr_ops;
++              break;
++
++      default:
+               return -ENODEV;
++      }
+-      ops->start = timer_start;
+-      ops->stop = timer_stop;
++      ops->create_files = NULL;
++      ops->setup = NULL;
++      ops->shutdown = NULL;
++      ops->start = nmi_start;
++      ops->stop = nmi_stop;
+       ops->cpu_type = "timer";
+-      printk(KERN_INFO "oprofile: Using perfctr NMI timer interrupt.\n");
++
++      printk(KERN_INFO "oprofile: Using perfctr based NMI timer interrupt.\n");
++
+       return 0;
+ }
+ #endif
+@@ -73,7 +233,7 @@
+       int ret = -ENODEV;
+ #ifdef CONFIG_SPARC64
+-      ret = op_nmi_timer_init(ops);
++      ret = oprofile_nmi_init(ops);
+       if (!ret)
+               return ret;
+ #endif
+@@ -81,6 +241,10 @@
+       return ret;
+ }
++
+ void oprofile_arch_exit(void)
+ {
++#ifdef CONFIG_SPARC64
++      unregister_perf_hsvc();
++#endif
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/um/drivers/vde_user.c linux-2.6.29-rc3.owrt/arch/um/drivers/vde_user.c
+--- linux-2.6.29.owrt/arch/um/drivers/vde_user.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/um/drivers/vde_user.c   2009-05-10 23:48:28.000000000 +0200
+@@ -78,7 +78,7 @@
+ {
+       struct vde_open_args *args;
+-      vpri->args = uml_kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
++      vpri->args = kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
+       if (vpri->args == NULL) {
+               printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args "
+                      "allocation failed");
+@@ -91,8 +91,8 @@
+       args->group = init->group;
+       args->mode = init->mode ? init->mode : 0700;
+-      args->port ?  printk("port %d", args->port) :
+-              printk("undefined port");
++      args->port ?  printk(UM_KERN_INFO "port %d", args->port) :
++              printk(UM_KERN_INFO "undefined port");
+ }
+ int vde_user_read(void *conn, void *buf, int len)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/um/kernel/ptrace.c linux-2.6.29-rc3.owrt/arch/um/kernel/ptrace.c
+--- linux-2.6.29.owrt/arch/um/kernel/ptrace.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/um/kernel/ptrace.c      2009-05-10 23:48:28.000000000 +0200
+@@ -64,11 +64,6 @@
+               ret = poke_user(child, addr, data);
+               break;
+-      case PTRACE_SYSEMU:
+-      case PTRACE_SYSEMU_SINGLESTEP:
+-              ret = -EIO;
+-              break;
+-
+       /* continue and stop at next (return from) syscall */
+       case PTRACE_SYSCALL:
+       /* restart after signal. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/um/os-Linux/user_syms.c linux-2.6.29-rc3.owrt/arch/um/os-Linux/user_syms.c
+--- linux-2.6.29.owrt/arch/um/os-Linux/user_syms.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/um/os-Linux/user_syms.c 2009-05-10 23:48:28.000000000 +0200
+@@ -14,6 +14,7 @@
+ #undef memset
+ extern size_t strlen(const char *);
++extern void *memcpy(void *, const void *, size_t);
+ extern void *memmove(void *, const void *, size_t);
+ extern void *memset(void *, int, size_t);
+ extern int printf(const char *, ...);
+@@ -23,11 +24,7 @@
+ EXPORT_SYMBOL(strstr);
+ #endif
+-#ifndef __x86_64__
+-extern void *memcpy(void *, const void *, size_t);
+ EXPORT_SYMBOL(memcpy);
+-#endif
+-
+ EXPORT_SYMBOL(memmove);
+ EXPORT_SYMBOL(memset);
+ EXPORT_SYMBOL(printf);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/boot/video-vesa.c linux-2.6.29-rc3.owrt/arch/x86/boot/video-vesa.c
+--- linux-2.6.29.owrt/arch/x86/boot/video-vesa.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/boot/video-vesa.c   2009-05-10 23:48:28.000000000 +0200
+@@ -269,8 +269,9 @@
+          we genuinely have to assume all registers are destroyed here. */
+       asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
+-          : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
+-          : : "esi", "edx");
++          : "+a" (ax), "+b" (bx)
++          :  "c" (cx), "D" (di)
++          : "esi");
+       if (ax != 0x004f)
+               return;         /* No EDID */
+@@ -284,9 +285,9 @@
+       dx = 0;                 /* EDID block number */
+       di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
+       asm(INT10
+-          : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
+-            "+c" (cx), "+D" (di)
+-          : : "esi");
++          : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info)
++          : "c" (cx), "D" (di)
++          : "esi");
+ #endif /* CONFIG_FIRMWARE_EDID */
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/ia32/ia32entry.S linux-2.6.29-rc3.owrt/arch/x86/ia32/ia32entry.S
+--- linux-2.6.29.owrt/arch/x86/ia32/ia32entry.S        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/ia32/ia32entry.S    2009-05-10 23:48:28.000000000 +0200
+@@ -418,9 +418,9 @@
+       orl   $TS_COMPAT,TI_status(%r10)
+       testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+       jnz ia32_tracesys
++ia32_do_syscall:      
+       cmpl $(IA32_NR_syscalls-1),%eax
+-      ja ia32_badsys
+-ia32_do_call:
++      ja  int_ret_from_sys_call       /* ia32_tracesys has set RAX(%rsp) */
+       IA32_ARG_FIXUP
+       call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
+ ia32_sysret:
+@@ -435,9 +435,7 @@
+       call syscall_trace_enter
+       LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
+       RESTORE_REST
+-      cmpl $(IA32_NR_syscalls-1),%eax
+-      ja  int_ret_from_sys_call       /* ia32_tracesys has set RAX(%rsp) */
+-      jmp ia32_do_call
++      jmp ia32_do_syscall
+ END(ia32_syscall)
+ ia32_badsys:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/a.out-core.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/a.out-core.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/a.out-core.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/a.out-core.h    2009-05-10 23:48:28.000000000 +0200
+@@ -23,6 +23,8 @@
+  */
+ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+ {
++      u16 gs;
++
+ /* changed the size calculations - should hopefully work better. lbt */
+       dump->magic = CMAGIC;
+       dump->start_code = 0;
+@@ -55,7 +57,7 @@
+       dump->regs.ds = (u16)regs->ds;
+       dump->regs.es = (u16)regs->es;
+       dump->regs.fs = (u16)regs->fs;
+-      savesegment(gs, dump->regs.gs);
++      savesegment(gs, gs);
+       dump->regs.orig_ax = regs->orig_ax;
+       dump->regs.ip = regs->ip;
+       dump->regs.cs = (u16)regs->cs;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/cpufeature.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/cpufeature.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/cpufeature.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/cpufeature.h    2009-05-10 23:48:28.000000000 +0200
+@@ -93,7 +93,6 @@
+ #define X86_FEATURE_XTOPOLOGY (3*32+22) /* cpu topology enum extensions */
+ #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
+ #define X86_FEATURE_NONSTOP_TSC       (3*32+24) /* TSC does not stop in C states */
+-#define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
+ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+ #define X86_FEATURE_XMM3      (4*32+ 0) /* "pni" SSE-3 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/dma-mapping.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/dma-mapping.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/dma-mapping.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/dma-mapping.h   2009-05-10 23:48:28.000000000 +0200
+@@ -2,8 +2,8 @@
+ #define _ASM_X86_DMA_MAPPING_H
+ /*
+- * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and
+- * Documentation/DMA-API.txt for documentation.
++ * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
++ * documentation.
+  */
+ #include <linux/scatterlist.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/e820.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/e820.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/e820.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/e820.h  2009-05-10 23:48:28.000000000 +0200
+@@ -49,7 +49,6 @@
+ #define E820_RESERVED_KERN        128
+ #ifndef __ASSEMBLY__
+-#include <linux/types.h>
+ struct e820entry {
+       __u64 addr;     /* start of memory segment */
+       __u64 size;     /* size of memory segment */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/efi.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/efi.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/efi.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/efi.h   2009-05-10 23:48:28.000000000 +0200
+@@ -37,6 +37,8 @@
+ #else /* !CONFIG_X86_32 */
++#define MAX_EFI_IO_PAGES      100
++
+ extern u64 efi_call0(void *fp);
+ extern u64 efi_call1(void *fp, u64 arg1);
+ extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/fixmap_64.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/fixmap_64.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/fixmap_64.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/fixmap_64.h     2009-05-10 23:48:28.000000000 +0200
+@@ -16,6 +16,7 @@
+ #include <asm/apicdef.h>
+ #include <asm/page.h>
+ #include <asm/vsyscall.h>
++#include <asm/efi.h>
+ /*
+  * Here we define all the compile-time 'special' virtual
+@@ -42,6 +43,9 @@
+       FIX_APIC_BASE,  /* local (CPU) APIC) -- required for SMP or not */
+       FIX_IO_APIC_BASE_0,
+       FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
++      FIX_EFI_IO_MAP_LAST_PAGE,
++      FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
++                                + MAX_EFI_IO_PAGES - 1,
+ #ifdef CONFIG_PARAVIRT
+       FIX_PARAVIRT_BOOTMAP,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/i387.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/i387.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/i387.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/i387.h  2009-05-10 23:48:28.000000000 +0200
+@@ -172,13 +172,7 @@
+ #else  /* CONFIG_X86_32 */
+-#ifdef CONFIG_MATH_EMULATION
+-extern void finit_task(struct task_struct *tsk);
+-#else
+-static inline void finit_task(struct task_struct *tsk)
+-{
+-}
+-#endif
++extern void finit(void);
+ static inline void tolerant_fwait(void)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/iomap.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/iomap.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/iomap.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/iomap.h 2009-05-10 23:48:28.000000000 +0200
+@@ -23,9 +23,6 @@
+ #include <asm/pgtable.h>
+ #include <asm/tlbflush.h>
+-int
+-is_io_mapping_possible(resource_size_t base, unsigned long size);
+-
+ void *
+ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/kvm.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/kvm.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/kvm.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/kvm.h   2009-05-10 23:48:28.000000000 +0200
+@@ -6,16 +6,9 @@
+  *
+  */
+-#include <linux/types.h>
++#include <asm/types.h>
+ #include <linux/ioctl.h>
+-/* Select x86 specific features in <linux/kvm.h> */
+-#define __KVM_HAVE_PIT
+-#define __KVM_HAVE_IOAPIC
+-#define __KVM_HAVE_DEVICE_ASSIGNMENT
+-#define __KVM_HAVE_MSI
+-#define __KVM_HAVE_USER_NMI
+-
+ /* Architectural interrupt line count. */
+ #define KVM_NR_INTERRUPTS 256
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/math_emu.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/math_emu.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/math_emu.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/math_emu.h      2009-05-10 23:48:28.000000000 +0200
+@@ -1,18 +1,31 @@
+ #ifndef _ASM_X86_MATH_EMU_H
+ #define _ASM_X86_MATH_EMU_H
+-#include <asm/ptrace.h>
+-#include <asm/vm86.h>
+-
+ /* This structure matches the layout of the data saved to the stack
+    following a device-not-present interrupt, part of it saved
+    automatically by the 80386/80486.
+    */
+-struct math_emu_info {
++struct info {
+       long ___orig_eip;
+-      union {
+-              struct pt_regs *regs;
+-              struct kernel_vm86_regs *vm86;
+-      };
++      long ___ebx;
++      long ___ecx;
++      long ___edx;
++      long ___esi;
++      long ___edi;
++      long ___ebp;
++      long ___eax;
++      long ___ds;
++      long ___es;
++      long ___fs;
++      long ___orig_eax;
++      long ___eip;
++      long ___cs;
++      long ___eflags;
++      long ___esp;
++      long ___ss;
++      long ___vm86_es; /* This and the following only in vm86 mode */
++      long ___vm86_ds;
++      long ___vm86_fs;
++      long ___vm86_gs;
+ };
+ #endif /* _ASM_X86_MATH_EMU_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/mce.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/mce.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/mce.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/mce.h   2009-05-10 23:48:28.000000000 +0200
+@@ -3,8 +3,8 @@
+ #ifdef __x86_64__
+-#include <linux/types.h>
+ #include <asm/ioctls.h>
++#include <asm/types.h>
+ /*
+  * Machine Check support for x86
+@@ -115,6 +115,8 @@
+ #endif /* !CONFIG_X86_32 */
++
++
+ #ifdef CONFIG_X86_MCE
+ extern void mcheck_init(struct cpuinfo_x86 *c);
+ #else
+@@ -124,4 +126,5 @@
+ extern void restart_mce(void);
+ #endif /* __KERNEL__ */
++
+ #endif /* _ASM_X86_MCE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/mmzone_32.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/mmzone_32.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/mmzone_32.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/mmzone_32.h     2009-05-10 23:48:28.000000000 +0200
+@@ -32,6 +32,8 @@
+       get_memcfg_numa_flat();
+ }
++extern int early_pfn_to_nid(unsigned long pfn);
++
+ extern void resume_map_numa_kva(pgd_t *pgd);
+ #else /* !CONFIG_NUMA */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/mmzone_64.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/mmzone_64.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/mmzone_64.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/mmzone_64.h     2009-05-10 23:48:28.000000000 +0200
+@@ -40,6 +40,8 @@
+ #define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +     \
+                                NODE_DATA(nid)->node_spanned_pages)
++extern int early_pfn_to_nid(unsigned long pfn);
++
+ #ifdef CONFIG_NUMA_EMU
+ #define FAKE_NODE_MIN_SIZE    (64 * 1024 * 1024)
+ #define FAKE_NODE_MIN_HASH_MASK       (~(FAKE_NODE_MIN_SIZE - 1UL))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/mpspec.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/mpspec.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/mpspec.h    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/mpspec.h        2009-05-10 23:48:28.000000000 +0200
+@@ -60,7 +60,6 @@
+                                  u32 gsi);
+ extern void mp_config_acpi_legacy_irqs(void);
+ extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+-extern int acpi_probe_gsi(void);
+ #ifdef CONFIG_X86_IO_APIC
+ extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+                               u32 gsi, int triggering, int polarity);
+@@ -72,11 +71,6 @@
+       return 0;
+ }
+ #endif
+-#else /* !CONFIG_ACPI: */
+-static inline int acpi_probe_gsi(void)
+-{
+-      return 0;
+-}
+ #endif /* CONFIG_ACPI */
+ #define PHYSID_ARRAY_SIZE     BITS_TO_LONGS(MAX_APICS)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/mtrr.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/mtrr.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/mtrr.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/mtrr.h  2009-05-10 23:48:28.000000000 +0200
+@@ -23,7 +23,6 @@
+ #ifndef _ASM_X86_MTRR_H
+ #define _ASM_X86_MTRR_H
+-#include <linux/types.h>
+ #include <linux/ioctl.h>
+ #include <linux/errno.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/page.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/page.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/page.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/page.h  2009-05-10 23:48:28.000000000 +0200
+@@ -57,6 +57,7 @@
+ typedef struct { pgprotval_t pgprot; } pgprot_t;
+ extern int page_is_ram(unsigned long pagenr);
++extern int pagerange_is_ram(unsigned long start, unsigned long end);
+ extern int devmem_is_allowed(unsigned long pagenr);
+ extern void map_devmem(unsigned long pfn, unsigned long size,
+                      pgprot_t vma_prot);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/paravirt.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/paravirt.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/paravirt.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/paravirt.h      2009-05-10 23:48:28.000000000 +0200
+@@ -1352,7 +1352,14 @@
+       PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
+ }
+-void arch_flush_lazy_cpu_mode(void);
++static inline void arch_flush_lazy_cpu_mode(void)
++{
++      if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
++              arch_leave_lazy_cpu_mode();
++              arch_enter_lazy_cpu_mode();
++      }
++}
++
+ #define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+ static inline void arch_enter_lazy_mmu_mode(void)
+@@ -1365,7 +1372,13 @@
+       PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
+ }
+-void arch_flush_lazy_mmu_mode(void);
++static inline void arch_flush_lazy_mmu_mode(void)
++{
++      if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
++              arch_leave_lazy_mmu_mode();
++              arch_enter_lazy_mmu_mode();
++      }
++}
+ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
+                               unsigned long phys, pgprot_t flags)
+@@ -1389,7 +1402,6 @@
+ {
+       return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
+ }
+-#define __raw_spin_is_contended       __raw_spin_is_contended
+ static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/pgtable.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/pgtable.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/pgtable.h   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/pgtable.h       2009-05-10 23:48:28.000000000 +0200
+@@ -302,30 +302,16 @@
+ extern pteval_t __supported_pte_mask;
+-/*
+- * Mask out unsupported bits in a present pgprot.  Non-present pgprots
+- * can use those bits for other purposes, so leave them be.
+- */
+-static inline pgprotval_t massage_pgprot(pgprot_t pgprot)
+-{
+-      pgprotval_t protval = pgprot_val(pgprot);
+-
+-      if (protval & _PAGE_PRESENT)
+-              protval &= __supported_pte_mask;
+-
+-      return protval;
+-}
+-
+ static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+ {
+-      return __pte(((phys_addr_t)page_nr << PAGE_SHIFT) |
+-                   massage_pgprot(pgprot));
++      return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
++                    pgprot_val(pgprot)) & __supported_pte_mask);
+ }
+ static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
+ {
+-      return __pmd(((phys_addr_t)page_nr << PAGE_SHIFT) |
+-                   massage_pgprot(pgprot));
++      return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
++                    pgprot_val(pgprot)) & __supported_pte_mask);
+ }
+ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+@@ -337,7 +323,7 @@
+        * the newprot (if present):
+        */
+       val &= _PAGE_CHG_MASK;
+-      val |= massage_pgprot(newprot) & ~_PAGE_CHG_MASK;
++      val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
+       return __pte(val);
+ }
+@@ -353,7 +339,7 @@
+ #define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+-#define canon_pgprot(p) __pgprot(massage_pgprot(p))
++#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+ static inline int is_new_memtype_allowed(unsigned long flags,
+                                               unsigned long new_flags)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/processor.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/processor.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/processor.h 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/processor.h     2009-05-10 23:48:28.000000000 +0200
+@@ -353,7 +353,7 @@
+       u8                      no_update;
+       u8                      rm;
+       u8                      alimit;
+-      struct math_emu_info    *info;
++      struct info             *info;
+       u32                     entry_eip;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/ptrace-abi.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/ptrace-abi.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/ptrace-abi.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/ptrace-abi.h    2009-05-10 23:48:28.000000000 +0200
+@@ -83,7 +83,7 @@
+ #ifdef CONFIG_X86_PTRACE_BTS
+ #ifndef __ASSEMBLY__
+-#include <linux/types.h>
++#include <asm/types.h>
+ /* configuration/status structure used in PTRACE_BTS_CONFIG and
+    PTRACE_BTS_STATUS commands.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/seccomp_32.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/seccomp_32.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/seccomp_32.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/seccomp_32.h    2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,12 @@
+ #ifndef _ASM_X86_SECCOMP_32_H
+ #define _ASM_X86_SECCOMP_32_H
++#include <linux/thread_info.h>
++
++#ifdef TIF_32BIT
++#error "unexpected TIF_32BIT on i386"
++#endif
++
+ #include <linux/unistd.h>
+ #define __NR_seccomp_read __NR_read
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/seccomp_64.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/seccomp_64.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/seccomp_64.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/seccomp_64.h    2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,14 @@
+ #ifndef _ASM_X86_SECCOMP_64_H
+ #define _ASM_X86_SECCOMP_64_H
++#include <linux/thread_info.h>
++
++#ifdef TIF_32BIT
++#error "unexpected TIF_32BIT on x86_64"
++#else
++#define TIF_32BIT TIF_IA32
++#endif
++
+ #include <linux/unistd.h>
+ #include <asm/ia32_unistd.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/sigcontext32.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/sigcontext32.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/sigcontext32.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/sigcontext32.h  2009-05-10 23:48:28.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _ASM_X86_SIGCONTEXT32_H
+ #define _ASM_X86_SIGCONTEXT32_H
+-#include <linux/types.h>
+-
+ /* signal context for 32bit programs. */
+ #define X86_FXSR_MAGIC                0x0000
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/sigcontext.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/sigcontext.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/sigcontext.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/sigcontext.h    2009-05-10 23:48:28.000000000 +0200
+@@ -2,7 +2,7 @@
+ #define _ASM_X86_SIGCONTEXT_H
+ #include <linux/compiler.h>
+-#include <linux/types.h>
++#include <asm/types.h>
+ #define FP_XSTATE_MAGIC1      0x46505853U
+ #define FP_XSTATE_MAGIC2      0x46505845U
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/spinlock.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/spinlock.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/spinlock.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/spinlock.h      2009-05-10 23:48:28.000000000 +0200
+@@ -245,7 +245,6 @@
+ {
+       return __ticket_spin_is_contended(lock);
+ }
+-#define __raw_spin_is_contended       __raw_spin_is_contended
+ static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/swab.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/swab.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/swab.h      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/swab.h  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ #ifndef _ASM_X86_SWAB_H
+ #define _ASM_X86_SWAB_H
+-#include <linux/types.h>
++#include <asm/types.h>
+ #include <linux/compiler.h>
+ static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/traps.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/traps.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/traps.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/traps.h 2009-05-10 23:48:28.000000000 +0200
+@@ -41,7 +41,7 @@
+ dotraplinkage void do_overflow(struct pt_regs *, long);
+ dotraplinkage void do_bounds(struct pt_regs *, long);
+ dotraplinkage void do_invalid_op(struct pt_regs *, long);
+-dotraplinkage void do_device_not_available(struct pt_regs);
++dotraplinkage void do_device_not_available(struct pt_regs *, long);
+ dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
+ dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
+ dotraplinkage void do_segment_not_present(struct pt_regs *, long);
+@@ -77,7 +77,7 @@
+ extern int kstack_depth_to_print;
+ void math_error(void __user *);
+-void math_emulate(struct math_emu_info *);
++asmlinkage void math_emulate(long);
+ #ifdef CONFIG_X86_32
+ unsigned long patch_espfix_desc(unsigned long, unsigned long);
+ #else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/include/asm/xen/page.h linux-2.6.29-rc3.owrt/arch/x86/include/asm/xen/page.h
+--- linux-2.6.29.owrt/arch/x86/include/asm/xen/page.h  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/include/asm/xen/page.h      2009-05-10 23:48:28.000000000 +0200
+@@ -137,7 +137,7 @@
+       pte_t pte;
+       pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
+-                      massage_pgprot(pgprot);
++              (pgprot_val(pgprot) & __supported_pte_mask);
+       return pte;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/Kconfig linux-2.6.29-rc3.owrt/arch/x86/Kconfig
+--- linux-2.6.29.owrt/arch/x86/Kconfig 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/Kconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -1802,17 +1802,6 @@
+         and include PCI device scope covered by these DMA
+         remapping devices.
+-config DMAR_DEFAULT_ON
+-      def_bool y
+-      prompt "Enable DMA Remapping Devices by default"
+-      depends on DMAR
+-      help
+-        Selecting this option will enable a DMAR device at boot time if
+-        one is found. If this option is not selected, DMAR support can
+-        be enabled by passing intel_iommu=on to the kernel. It is
+-        recommended you say N here while the DMAR code remains
+-        experimental.
+-
+ config DMAR_GFX_WA
+       def_bool y
+       prompt "Support for Graphics workaround"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/Kconfig.cpu linux-2.6.29-rc3.owrt/arch/x86/Kconfig.cpu
+--- linux-2.6.29.owrt/arch/x86/Kconfig.cpu     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/Kconfig.cpu 2009-05-10 23:48:28.000000000 +0200
+@@ -167,9 +167,9 @@
+ config MK8
+       bool "Opteron/Athlon64/Hammer/K8"
+       help
+-        Select this for an AMD Opteron or Athlon64 Hammer-family processor.
+-        Enables use of some extended instructions, and passes appropriate
+-        optimization flags to GCC.
++        Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
++        use of some extended instructions, and passes appropriate optimization
++        flags to GCC.
+ config MCRUSOE
+       bool "Crusoe"
+@@ -256,11 +256,9 @@
+ config MCORE2
+       bool "Core 2/newer Xeon"
+       help
+-
+-        Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
+-        53xx) CPUs. You can distinguish newer from older Xeons by the CPU
+-        family in /proc/cpuinfo. Newer ones have 6 and older ones 15
+-        (not a typo)
++        Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
++        CPUs. You can distinguish newer from older Xeons by the CPU family
++        in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+ config GENERIC_CPU
+       bool "Generic-x86-64"
+@@ -322,14 +320,14 @@
+       bool "PentiumPro memory ordering errata workaround"
+       depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+       help
+-        Old PentiumPro multiprocessor systems had errata that could cause
+-        memory operations to violate the x86 ordering standard in rare cases.
+-        Enabling this option will attempt to work around some (but not all)
+-        occurances of this problem, at the cost of much heavier spinlock and
+-        memory barrier operations.
++        Old PentiumPro multiprocessor systems had errata that could cause memory
++        operations to violate the x86 ordering standard in rare cases. Enabling this
++        option will attempt to work around some (but not all) occurances of
++        this problem, at the cost of much heavier spinlock and memory barrier
++        operations.
+-        If unsure, say n here. Even distro kernels should think twice before
+-        enabling this: there are few systems, and an unlikely bug.
++        If unsure, say n here. Even distro kernels should think twice before enabling
++        this: there are few systems, and an unlikely bug.
+ config X86_F00F_BUG
+       def_bool y
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/Kconfig.debug linux-2.6.29-rc3.owrt/arch/x86/Kconfig.debug
+--- linux-2.6.29.owrt/arch/x86/Kconfig.debug   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/Kconfig.debug       2009-05-10 23:48:28.000000000 +0200
+@@ -174,8 +174,28 @@
+         Add a simple leak tracer to the IOMMU code. This is useful when you
+         are debugging a buggy device driver that leaks IOMMU mappings.
+-config HAVE_MMIOTRACE_SUPPORT
+-      def_bool y
++config MMIOTRACE
++      bool "Memory mapped IO tracing"
++      depends on DEBUG_KERNEL && PCI
++      select TRACING
++      help
++        Mmiotrace traces Memory Mapped I/O access and is meant for
++        debugging and reverse engineering. It is called from the ioremap
++        implementation and works via page faults. Tracing is disabled by
++        default and can be enabled at run-time.
++
++        See Documentation/tracers/mmiotrace.txt.
++        If you are not helping to develop drivers, say N.
++
++config MMIOTRACE_TEST
++      tristate "Test module for mmiotrace"
++      depends on MMIOTRACE && m
++      help
++        This is a dumb module for testing mmiotrace. It is very dangerous
++        as it will write garbage to IO memory starting at a given address.
++        However, it should be safe to use on e.g. unused portion of VRAM.
++
++        Say N, unless you absolutely know what you are doing.
+ #
+ # IO delay types:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/acpi/boot.c linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/boot.c
+--- linux-2.6.29.owrt/arch/x86/kernel/acpi/boot.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/boot.c  2009-05-10 23:48:28.000000000 +0200
+@@ -973,29 +973,6 @@
+       nr_ioapics++;
+ }
+-int __init acpi_probe_gsi(void)
+-{
+-      int idx;
+-      int gsi;
+-      int max_gsi = 0;
+-
+-      if (acpi_disabled)
+-              return 0;
+-
+-      if (!acpi_ioapic)
+-              return 0;
+-
+-      max_gsi = 0;
+-      for (idx = 0; idx < nr_ioapics; idx++) {
+-              gsi = mp_ioapic_routing[idx].gsi_end;
+-
+-              if (gsi > max_gsi)
+-                      max_gsi = gsi;
+-      }
+-
+-      return max_gsi + 1;
+-}
+-
+ static void assign_to_mp_irq(struct mp_config_intsrc *m,
+                                   struct mp_config_intsrc *mp_irq)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/acpi/sleep.c linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/sleep.c
+--- linux-2.6.29.owrt/arch/x86/kernel/acpi/sleep.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/sleep.c 2009-05-10 23:48:28.000000000 +0200
+@@ -156,11 +156,11 @@
+ #ifdef CONFIG_HIBERNATION
+               if (strncmp(str, "s4_nohwsig", 10) == 0)
+                       acpi_no_s4_hw_signature();
+-              if (strncmp(str, "s4_nonvs", 8) == 0)
+-                      acpi_s4_no_nvs();
+ #endif
+               if (strncmp(str, "old_ordering", 12) == 0)
+                       acpi_old_suspend_ordering();
++              if (strncmp(str, "s4_nonvs", 8) == 0)
++                      acpi_s4_no_nvs();
+               str = strchr(str, ',');
+               if (str != NULL)
+                       str += strspn(str, ", \t");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/acpi/wakeup_64.S linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/wakeup_64.S
+--- linux-2.6.29.owrt/arch/x86/kernel/acpi/wakeup_64.S 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/acpi/wakeup_64.S     2009-05-10 23:48:28.000000000 +0200
+@@ -13,6 +13,7 @@
+        * Hooray, we are in Long 64-bit mode (but still running in low memory)
+        */
+ ENTRY(wakeup_long64)
++wakeup_long64:
+       movq    saved_magic, %rax
+       movq    $0x123456789abcdef0, %rdx
+       cmpq    %rdx, %rax
+@@ -33,12 +34,16 @@
+       movq    saved_rip, %rax
+       jmp     *%rax
+-ENDPROC(wakeup_long64)
+ bogus_64_magic:
+       jmp     bogus_64_magic
+-ENTRY(do_suspend_lowlevel)
++      .align 2
++      .p2align 4,,15
++.globl do_suspend_lowlevel
++      .type   do_suspend_lowlevel,@function
++do_suspend_lowlevel:
++.LFB5:
+       subq    $8, %rsp
+       xorl    %eax, %eax
+       call    save_processor_state
+@@ -62,7 +67,7 @@
+       pushfq
+       popq    pt_regs_flags(%rax)
+-      movq    $resume_point, saved_rip(%rip)
++      movq    $.L97, saved_rip(%rip)
+       movq    %rsp, saved_rsp
+       movq    %rbp, saved_rbp
+@@ -73,12 +78,14 @@
+       addq    $8, %rsp
+       movl    $3, %edi
+       xorl    %eax, %eax
+-      call    acpi_enter_sleep_state
+-      /* in case something went wrong, restore the machine status and go on */
+-      jmp     resume_point
+-
++      jmp     acpi_enter_sleep_state
++.L97:
++      .p2align 4,,7
++.L99:
+       .align 4
+-resume_point:
++      movl    $24, %eax
++      movw    %ax, %ds
++
+       /* We don't restore %rax, it must be 0 anyway */
+       movq    $saved_context, %rax
+       movq    saved_context_cr4(%rax), %rbx
+@@ -110,9 +117,12 @@
+       xorl    %eax, %eax
+       addq    $8, %rsp
+       jmp     restore_processor_state
+-ENDPROC(do_suspend_lowlevel)
+-
++.LFE5:
++.Lfe5:
++      .size   do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
++      
+ .data
++ALIGN
+ ENTRY(saved_rbp)      .quad   0
+ ENTRY(saved_rsi)      .quad   0
+ ENTRY(saved_rdi)      .quad   0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/apic.c linux-2.6.29-rc3.owrt/arch/x86/kernel/apic.c
+--- linux-2.6.29.owrt/arch/x86/kernel/apic.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/apic.c       2009-05-10 23:48:28.000000000 +0200
+@@ -862,7 +862,7 @@
+       }
+       /* lets not touch this if we didn't frob it */
+-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
++#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+       if (maxlvt >= 5) {
+               v = apic_read(APIC_LVTTHMR);
+               apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+@@ -1436,7 +1436,7 @@
+       switch (boot_cpu_data.x86_vendor) {
+       case X86_VENDOR_AMD:
+               if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
+-                  (boot_cpu_data.x86 >= 15))
++                  (boot_cpu_data.x86 == 15))
+                       break;
+               goto no_apic;
+       case X86_VENDOR_INTEL:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/apm_32.c linux-2.6.29-rc3.owrt/arch/x86/kernel/apm_32.c
+--- linux-2.6.29.owrt/arch/x86/kernel/apm_32.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/apm_32.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1192,7 +1192,6 @@
+       device_suspend(PMSG_SUSPEND);
+       local_irq_disable();
+       device_power_down(PMSG_SUSPEND);
+-      sysdev_suspend(PMSG_SUSPEND);
+       local_irq_enable();
+@@ -1209,7 +1208,6 @@
+       if (err != APM_SUCCESS)
+               apm_error("suspend", err);
+       err = (err == APM_SUCCESS) ? 0 : -EIO;
+-      sysdev_resume();
+       device_power_up(PMSG_RESUME);
+       local_irq_enable();
+       device_resume(PMSG_RESUME);
+@@ -1230,7 +1228,6 @@
+       local_irq_disable();
+       device_power_down(PMSG_SUSPEND);
+-      sysdev_suspend(PMSG_SUSPEND);
+       local_irq_enable();
+       err = set_system_power_state(APM_STATE_STANDBY);
+@@ -1238,7 +1235,6 @@
+               apm_error("standby", err);
+       local_irq_disable();
+-      sysdev_resume();
+       device_power_up(PMSG_RESUME);
+       local_irq_enable();
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/Kconfig linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/Kconfig
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/Kconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -245,6 +245,17 @@
+ comment "shared options"
++config X86_ACPI_CPUFREQ_PROC_INTF
++      bool "/proc/acpi/processor/../performance interface (deprecated)"
++      depends on PROC_FS
++      depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
++      help
++        This enables the deprecated /proc/acpi/processor/../performance
++        interface. While it is helpful for debugging, the generic,
++        cross-architecture cpufreq interfaces should be used.
++
++        If in doubt, say N.
++
+ config X86_SPEEDSTEP_LIB
+       tristate
+       default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c    2009-05-10 23:48:28.000000000 +0200
+@@ -277,6 +277,7 @@
+       .name           = "p4-clockmod",
+       .owner          = THIS_MODULE,
+       .attr           = p4clockmod_attr,
++      .hide_interface = 1,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/powernow-k8.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/cpufreq/powernow-k8.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/cpufreq/powernow-k8.c    2009-05-10 23:48:28.000000000 +0200
+@@ -939,25 +939,10 @@
+       free_cpumask_var(data->acpi_data.shared_cpu_map);
+ }
+-static int get_transition_latency(struct powernow_k8_data *data)
+-{
+-      int max_latency = 0;
+-      int i;
+-      for (i = 0; i < data->acpi_data.state_count; i++) {
+-              int cur_latency = data->acpi_data.states[i].transition_latency
+-                      + data->acpi_data.states[i].bus_master_latency;
+-              if (cur_latency > max_latency)
+-                      max_latency = cur_latency;
+-      }
+-      /* value in usecs, needs to be in nanoseconds */
+-      return 1000 * max_latency;
+-}
+-
+ #else
+ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
+ static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
+ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+-static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
+ #endif /* CONFIG_X86_POWERNOW_K8_ACPI */
+ /* Take a frequency, and issue the fid/vid transition command */
+@@ -1157,7 +1142,8 @@
+       data->cpu = pol->cpu;
+       data->currpstate = HW_PSTATE_INVALID;
+-      if (powernow_k8_cpu_init_acpi(data)) {
++      rc = powernow_k8_cpu_init_acpi(data);
++      if (rc) {
+               /*
+                * Use the PSB BIOS structure. This is only availabe on
+                * an UP version, and is deprecated by AMD.
+@@ -1175,28 +1161,19 @@
+                              "ACPI maintainers and complain to your BIOS "
+                              "vendor.\n");
+ #endif
+-                      kfree(data);
+-                      return -ENODEV;
++                      goto err_out;
+               }
+               if (pol->cpu != 0) {
+                       printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
+                              "CPU other than CPU0. Complain to your BIOS "
+                              "vendor.\n");
+-                      kfree(data);
+-                      return -ENODEV;
++                      goto err_out;
+               }
+               rc = find_psb_table(data);
+               if (rc) {
+-                      kfree(data);
+-                      return -ENODEV;
++                      goto err_out;
+               }
+-              /* Take a crude guess here.
+-               * That guess was in microseconds, so multiply with 1000 */
+-              pol->cpuinfo.transition_latency = (
+-                       ((data->rvo + 8) * data->vstable * VST_UNITS_20US) +
+-                       ((1 << data->irt) * 30)) * 1000;
+-      } else /* ACPI _PSS objects available */
+-              pol->cpuinfo.transition_latency = get_transition_latency(data);
++      }
+       /* only run on specific CPU from here on */
+       oldmask = current->cpus_allowed;
+@@ -1227,6 +1204,11 @@
+               cpumask_copy(pol->cpus, &per_cpu(cpu_core_map, pol->cpu));
+       data->available_cores = pol->cpus;
++      /* Take a crude guess here.
++       * That guess was in microseconds, so multiply with 1000 */
++      pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
++          + (3 * (1 << data->irt) * 10)) * 1000;
++
+       if (cpu_family == CPU_HW_PSTATE)
+               pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+       else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/intel.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/intel.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/intel.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/intel.c  2009-05-10 23:48:28.000000000 +0200
+@@ -30,7 +30,7 @@
+ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
+ {
+       /* Unmask CPUID levels if masked: */
+-      if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
++      if (c->x86 == 6 && c->x86_model >= 15) {
+               u64 misc_enable;
+               rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+@@ -291,9 +291,6 @@
+               ds_init_intel(c);
+       }
+-      if (c->x86 == 6 && c->x86_model == 29 && cpu_has_clflush)
+-              set_cpu_cap(c, X86_FEATURE_CLFLUSH_MONITOR);
+-
+ #ifdef CONFIG_X86_64
+       if (c->x86 == 15)
+               c->x86_cache_alignment = c->x86_clflush_size * 2;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/intel_cacheinfo.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/intel_cacheinfo.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/intel_cacheinfo.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/intel_cacheinfo.c        2009-05-10 23:48:28.000000000 +0200
+@@ -36,11 +36,8 @@
+ {
+       { 0x06, LVL_1_INST, 8 },        /* 4-way set assoc, 32 byte line size */
+       { 0x08, LVL_1_INST, 16 },       /* 4-way set assoc, 32 byte line size */
+-      { 0x09, LVL_1_INST, 32 },       /* 4-way set assoc, 64 byte line size */
+       { 0x0a, LVL_1_DATA, 8 },        /* 2 way set assoc, 32 byte line size */
+       { 0x0c, LVL_1_DATA, 16 },       /* 4-way set assoc, 32 byte line size */
+-      { 0x0d, LVL_1_DATA, 16 },       /* 4-way set assoc, 64 byte line size */
+-      { 0x21, LVL_2,      256 },      /* 8-way set assoc, 64 byte line size */
+       { 0x22, LVL_3,      512 },      /* 4-way set assoc, sectored cache, 64 byte line size */
+       { 0x23, LVL_3,      1024 },     /* 8-way set assoc, sectored cache, 64 byte line size */
+       { 0x25, LVL_3,      2048 },     /* 8-way set assoc, sectored cache, 64 byte line size */
+@@ -88,18 +85,6 @@
+       { 0x85, LVL_2,    2048 },       /* 8-way set assoc, 32 byte line size */
+       { 0x86, LVL_2,     512 },       /* 4-way set assoc, 64 byte line size */
+       { 0x87, LVL_2,    1024 },       /* 8-way set assoc, 64 byte line size */
+-      { 0xd0, LVL_3,     512 },       /* 4-way set assoc, 64 byte line size */
+-      { 0xd1, LVL_3,    1024 },       /* 4-way set assoc, 64 byte line size */
+-      { 0xd2, LVL_3,    2048 },       /* 4-way set assoc, 64 byte line size */
+-      { 0xd6, LVL_3,    1024 },       /* 8-way set assoc, 64 byte line size */
+-      { 0xd7, LVL_3,    2038 },       /* 8-way set assoc, 64 byte line size */
+-      { 0xd8, LVL_3,    4096 },       /* 12-way set assoc, 64 byte line size */
+-      { 0xdc, LVL_3,    2048 },       /* 12-way set assoc, 64 byte line size */
+-      { 0xdd, LVL_3,    4096 },       /* 12-way set assoc, 64 byte line size */
+-      { 0xde, LVL_3,    8192 },       /* 12-way set assoc, 64 byte line size */
+-      { 0xe2, LVL_3,    2048 },       /* 16-way set assoc, 64 byte line size */
+-      { 0xe3, LVL_3,    4096 },       /* 16-way set assoc, 64 byte line size */
+-      { 0xe4, LVL_3,    8192 },       /* 16-way set assoc, 64 byte line size */
+       { 0x00, 0, 0}
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_64.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_64.c  2009-05-10 23:48:28.000000000 +0200
+@@ -295,11 +295,11 @@
+                * If we know that the error was in user space, send a
+                * SIGBUS.  Otherwise, panic if tolerance is low.
+                *
+-               * force_sig() takes an awful lot of locks and has a slight
++               * do_exit() takes an awful lot of locks and has a slight
+                * risk of deadlocking.
+                */
+               if (user_space) {
+-                      force_sig(SIGBUS, current);
++                      do_exit(SIGBUS);
+               } else if (panic_on_oops || tolerant < 2) {
+                       mce_panic("Uncorrected machine check",
+                               &panicm, mcestart);
+@@ -490,7 +490,7 @@
+ }
+-static void mce_cpu_features(struct cpuinfo_x86 *c)
++static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
+ {
+       switch (c->x86_vendor) {
+       case X86_VENDOR_INTEL:
+@@ -734,7 +734,6 @@
+ static int mce_resume(struct sys_device *dev)
+ {
+       mce_init(NULL);
+-      mce_cpu_features(&current_cpu_data);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_amd_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_amd_64.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_amd_64.c      2009-05-10 23:48:28.000000000 +0200
+@@ -121,7 +121,7 @@
+ }
+ /* cpu init entry point, called from mce.c with preempt off */
+-void mce_amd_feature_init(struct cpuinfo_x86 *c)
++void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
+ {
+       unsigned int bank, block;
+       unsigned int cpu = smp_processor_id();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_intel_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/mcheck/mce_intel_64.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mcheck/mce_intel_64.c    2009-05-10 23:48:28.000000000 +0200
+@@ -30,7 +30,7 @@
+       irq_exit();
+ }
+-static void intel_init_thermal(struct cpuinfo_x86 *c)
++static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
+ {
+       u32 l, h;
+       int tm2 = 0;
+@@ -84,7 +84,7 @@
+       return;
+ }
+-void mce_intel_feature_init(struct cpuinfo_x86 *c)
++void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
+ {
+       intel_init_thermal(c);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/cpu/mtrr/main.c linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mtrr/main.c
+--- linux-2.6.29.owrt/arch/x86/kernel/cpu/mtrr/main.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/cpu/mtrr/main.c      2009-05-10 23:48:28.000000000 +0200
+@@ -1594,7 +1594,8 @@
+       /* kvm/qemu doesn't have mtrr set right, don't trim them all */
+       if (!highest_pfn) {
+-              printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
++              WARN(!kvm_para_available(), KERN_WARNING
++                              "WARNING: strange, CPU MTRRs all blank?\n");
+               return 0;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/ds.c linux-2.6.29-rc3.owrt/arch/x86/kernel/ds.c
+--- linux-2.6.29.owrt/arch/x86/kernel/ds.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/ds.c 2009-05-10 23:48:28.000000000 +0200
+@@ -15,8 +15,8 @@
+  * - buffer allocation (memory accounting)
+  *
+  *
+- * Copyright (C) 2007-2009 Intel Corporation.
+- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
++ * Copyright (C) 2007-2008 Intel Corporation.
++ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+  */
+@@ -729,7 +729,7 @@
+       spin_unlock_irqrestore(&ds_lock, irq);
+-      ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
++      ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+       ds_resume_pebs(tracer);
+       return tracer;
+@@ -890,7 +890,7 @@
+ }
+ static const struct ds_configuration ds_cfg_netburst = {
+-      .name = "Netburst",
++      .name = "netburst",
+       .ctl[dsf_bts]           = (1 << 2) | (1 << 3),
+       .ctl[dsf_bts_kernel]    = (1 << 5),
+       .ctl[dsf_bts_user]      = (1 << 6),
+@@ -904,7 +904,7 @@
+ #endif
+ };
+ static const struct ds_configuration ds_cfg_pentium_m = {
+-      .name = "Pentium M",
++      .name = "pentium m",
+       .ctl[dsf_bts]           = (1 << 6) | (1 << 7),
+       .sizeof_field           = sizeof(long),
+@@ -915,8 +915,8 @@
+       .sizeof_rec[ds_pebs]    = sizeof(long) * 18,
+ #endif
+ };
+-static const struct ds_configuration ds_cfg_core2_atom = {
+-      .name = "Core 2/Atom",
++static const struct ds_configuration ds_cfg_core2 = {
++      .name = "core 2",
+       .ctl[dsf_bts]           = (1 << 6) | (1 << 7),
+       .ctl[dsf_bts_kernel]    = (1 << 9),
+       .ctl[dsf_bts_user]      = (1 << 10),
+@@ -949,22 +949,19 @@
+       switch (c->x86) {
+       case 0x6:
+               switch (c->x86_model) {
+-              case 0x9:
+-              case 0xd: /* Pentium M */
+-                      ds_configure(&ds_cfg_pentium_m);
++              case 0 ... 0xC:
++                      /* sorry, don't know about them */
+                       break;
+-              case 0xf:
+-              case 0x17: /* Core2 */
+-              case 0x1c: /* Atom */
+-                      ds_configure(&ds_cfg_core2_atom);
++              case 0xD:
++              case 0xE: /* Pentium M */
++                      ds_configure(&ds_cfg_pentium_m);
+                       break;
+-              case 0x1a: /* i7 */
+-              default:
+-                      /* sorry, don't know about them */
++              default: /* Core2, Atom, ... */
++                      ds_configure(&ds_cfg_core2);
+                       break;
+               }
+               break;
+-      case 0xf:
++      case 0xF:
+               switch (c->x86_model) {
+               case 0x0:
+               case 0x1:
+@@ -1029,4 +1026,5 @@
+ void ds_exit_thread(struct task_struct *tsk)
+ {
++      WARN_ON(tsk->thread.ds_ctx);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/efi_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/efi_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/efi_64.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/efi_64.c     2009-05-10 23:48:28.000000000 +0200
+@@ -99,11 +99,24 @@
+ void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+ {
+-      unsigned long last_map_pfn;
++      static unsigned pages_mapped __initdata;
++      unsigned i, pages;
++      unsigned long offset;
+-      last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+-      if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
++      pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
++      offset = phys_addr & ~PAGE_MASK;
++      phys_addr &= PAGE_MASK;
++
++      if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+               return NULL;
+-      return (void __iomem *)__va(phys_addr);
++      for (i = 0; i < pages; i++) {
++              __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
++                           phys_addr, PAGE_KERNEL);
++              phys_addr += PAGE_SIZE;
++              pages_mapped++;
++      }
++
++      return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
++                                           (pages_mapped - pages)) + offset;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/efi.c linux-2.6.29-rc3.owrt/arch/x86/kernel/efi.c
+--- linux-2.6.29.owrt/arch/x86/kernel/efi.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/efi.c        2009-05-10 23:48:28.000000000 +0200
+@@ -467,7 +467,7 @@
+       efi_memory_desc_t *md;
+       efi_status_t status;
+       unsigned long size;
+-      u64 end, systab, addr, npages, end_pfn;
++      u64 end, systab, addr, npages;
+       void *p, *va;
+       efi.systab = NULL;
+@@ -479,10 +479,7 @@
+               size = md->num_pages << EFI_PAGE_SHIFT;
+               end = md->phys_addr + size;
+-              end_pfn = PFN_UP(end);
+-              if (end_pfn <= max_low_pfn_mapped
+-                  || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+-                      && end_pfn <= max_pfn_mapped))
++              if (PFN_UP(end) <= max_low_pfn_mapped)
+                       va = __va(md->phys_addr);
+               else
+                       va = efi_ioremap(md->phys_addr, size);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/entry_64.S linux-2.6.29-rc3.owrt/arch/x86/kernel/entry_64.S
+--- linux-2.6.29.owrt/arch/x86/kernel/entry_64.S       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/entry_64.S   2009-05-10 23:48:28.000000000 +0200
+@@ -346,7 +346,6 @@
+       popq_cfi %rax                   /* move return address... */
+       mov %gs:pda_irqstackptr,%rsp
+       EMPTY_FRAME 0
+-      pushq_cfi %rbp                  /* backlink for unwinder */
+       pushq_cfi %rax                  /* ... to the new stack */
+       /*
+        * We entered an interrupt context - irqs are off:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/ftrace.c linux-2.6.29-rc3.owrt/arch/x86/kernel/ftrace.c
+--- linux-2.6.29.owrt/arch/x86/kernel/ftrace.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/ftrace.c     2009-05-10 23:48:28.000000000 +0200
+@@ -488,21 +488,20 @@
+        * ignore such a protection.
+        */
+       asm volatile(
+-              "1: " _ASM_MOV " (%[parent]), %[old]\n"
+-              "2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
++              "1: " _ASM_MOV " (%[parent_old]), %[old]\n"
++              "2: " _ASM_MOV " %[return_hooker], (%[parent_replaced])\n"
+               "   movl $0, %[faulted]\n"
+-              "3:\n"
+               ".section .fixup, \"ax\"\n"
+-              "4: movl $1, %[faulted]\n"
+-              "   jmp 3b\n"
++              "3: movl $1, %[faulted]\n"
+               ".previous\n"
+-              _ASM_EXTABLE(1b, 4b)
+-              _ASM_EXTABLE(2b, 4b)
++              _ASM_EXTABLE(1b, 3b)
++              _ASM_EXTABLE(2b, 3b)
+-              : [old] "=r" (old), [faulted] "=r" (faulted)
+-              : [parent] "r" (parent), [return_hooker] "r" (return_hooker)
++              : [parent_replaced] "=r" (parent), [old] "=r" (old),
++                [faulted] "=r" (faulted)
++              : [parent_old] "0" (parent), [return_hooker] "r" (return_hooker)
+               : "memory"
+       );
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/hpet.c linux-2.6.29-rc3.owrt/arch/x86/kernel/hpet.c
+--- linux-2.6.29.owrt/arch/x86/kernel/hpet.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/hpet.c       2009-05-10 23:48:28.000000000 +0200
+@@ -269,8 +269,6 @@
+               now = hpet_readl(HPET_COUNTER);
+               cmp = now + (unsigned long) delta;
+               cfg = hpet_readl(HPET_Tn_CFG(timer));
+-              /* Make sure we use edge triggered interrupts */
+-              cfg &= ~HPET_TN_LEVEL;
+               cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+                      HPET_TN_SETVAL | HPET_TN_32BIT;
+               hpet_writel(cfg, HPET_Tn_CFG(timer));
+@@ -899,7 +897,7 @@
+ static int hpet_prev_update_sec;
+ static struct rtc_time hpet_alarm_time;
+ static unsigned long hpet_pie_count;
+-static u32 hpet_t1_cmp;
++static unsigned long hpet_t1_cmp;
+ static unsigned long hpet_default_delta;
+ static unsigned long hpet_pie_delta;
+ static unsigned long hpet_pie_limit;
+@@ -907,14 +905,6 @@
+ static rtc_irq_handler irq_handler;
+ /*
+- * Check that the hpet counter c1 is ahead of the c2
+- */
+-static inline int hpet_cnt_ahead(u32 c1, u32 c2)
+-{
+-      return (s32)(c2 - c1) < 0;
+-}
+-
+-/*
+  * Registers a IRQ handler.
+  */
+ int hpet_register_irq_handler(rtc_irq_handler handler)
+@@ -1085,7 +1075,7 @@
+               hpet_t1_cmp += delta;
+               hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
+               lost_ints++;
+-      } while (!hpet_cnt_ahead(hpet_t1_cmp, hpet_readl(HPET_COUNTER)));
++      } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0);
+       if (lost_ints) {
+               if (hpet_rtc_flags & RTC_PIE)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/i387.c linux-2.6.29-rc3.owrt/arch/x86/kernel/i387.c
+--- linux-2.6.29.owrt/arch/x86/kernel/i387.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/i387.c       2009-05-10 23:48:28.000000000 +0200
+@@ -136,7 +136,7 @@
+ #ifdef CONFIG_X86_32
+       if (!HAVE_HWFP) {
+               memset(tsk->thread.xstate, 0, xstate_size);
+-              finit_task(tsk);
++              finit();
+               set_stopped_child_used_math(tsk);
+               return 0;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/i8237.c linux-2.6.29-rc3.owrt/arch/x86/kernel/i8237.c
+--- linux-2.6.29.owrt/arch/x86/kernel/i8237.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/i8237.c      2009-05-10 23:48:28.000000000 +0200
+@@ -28,10 +28,10 @@
+       flags = claim_dma_lock();
+-      dma_outb(0, DMA1_RESET_REG);
+-      dma_outb(0, DMA2_RESET_REG);
++      dma_outb(DMA1_RESET_REG, 0);
++      dma_outb(DMA2_RESET_REG, 0);
+-      for (i = 0; i < 8; i++) {
++      for (i = 0;i < 8;i++) {
+               set_dma_addr(i, 0x000000);
+               /* DMA count is a bit weird so this is not 0 */
+               set_dma_count(i, 1);
+@@ -51,14 +51,14 @@
+ }
+ static struct sysdev_class i8237_sysdev_class = {
+-      .name           = "i8237",
+-      .suspend        = i8237A_suspend,
+-      .resume         = i8237A_resume,
++      .name = "i8237",
++      .suspend = i8237A_suspend,
++      .resume = i8237A_resume,
+ };
+ static struct sys_device device_i8237A = {
+-      .id             = 0,
+-      .cls            = &i8237_sysdev_class,
++      .id     = 0,
++      .cls    = &i8237_sysdev_class,
+ };
+ static int __init i8237A_init_sysfs(void)
+@@ -68,4 +68,5 @@
+               error = sysdev_register(&device_i8237A);
+       return error;
+ }
++
+ device_initcall(i8237A_init_sysfs);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/io_apic.c linux-2.6.29-rc3.owrt/arch/x86/kernel/io_apic.c
+--- linux-2.6.29.owrt/arch/x86/kernel/io_apic.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/io_apic.c    2009-05-10 23:48:28.000000000 +0200
+@@ -2528,15 +2528,14 @@
+       vector = ~get_irq_regs()->orig_ax;
+       me = smp_processor_id();
+-
+-      if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
+ #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+               *descp = desc = move_irq_desc(desc, me);
+               /* get the new one */
+               cfg = desc->chip_data;
+ #endif
++
++      if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
+               send_cleanup_vector(cfg);
+-      }
+ }
+ #else
+ static inline void irq_complete_move(struct irq_desc **descp) {}
+@@ -3841,24 +3840,14 @@
+ void __init probe_nr_irqs_gsi(void)
+ {
++      int idx;
+       int nr = 0;
+-      nr = acpi_probe_gsi();
+-      if (nr > nr_irqs_gsi) {
+-              nr_irqs_gsi = nr;
+-      } else {
+-              /* for acpi=off or acpi is not compiled in */
+-              int idx;
+-
+-              nr = 0;
+-              for (idx = 0; idx < nr_ioapics; idx++)
+-                      nr += io_apic_get_redir_entries(idx) + 1;
+-
+-              if (nr > nr_irqs_gsi)
+-                      nr_irqs_gsi = nr;
+-      }
++      for (idx = 0; idx < nr_ioapics; idx++)
++              nr += io_apic_get_redir_entries(idx) + 1;
+-      printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
++      if (nr > nr_irqs_gsi)
++              nr_irqs_gsi = nr;
+ }
+ /* --------------------------------------------------------------------------
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/irqinit_32.c linux-2.6.29-rc3.owrt/arch/x86/kernel/irqinit_32.c
+--- linux-2.6.29.owrt/arch/x86/kernel/irqinit_32.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/irqinit_32.c 2009-05-10 23:48:28.000000000 +0200
+@@ -78,6 +78,15 @@
+       }
+ }
++/*
++ * IRQ2 is cascade interrupt to second interrupt controller
++ */
++static struct irqaction irq2 = {
++      .handler = no_action,
++      .mask = CPU_MASK_NONE,
++      .name = "cascade",
++};
++
+ DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+       [0 ... IRQ0_VECTOR - 1] = -1,
+       [IRQ0_VECTOR] = 0,
+@@ -169,6 +178,9 @@
+       alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ #endif
++      if (!acpi_ioapic)
++              setup_irq(2, &irq2);
++
+       /* setup after call gates are initialised (usually add in
+        * the architecture specific gates)
+        */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/kprobes.c linux-2.6.29-rc3.owrt/arch/x86/kernel/kprobes.c
+--- linux-2.6.29.owrt/arch/x86/kernel/kprobes.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/kprobes.c    2009-05-10 23:48:28.000000000 +0200
+@@ -193,9 +193,6 @@
+       kprobe_opcode_t opcode;
+       kprobe_opcode_t *orig_opcodes = opcodes;
+-      if (search_exception_tables(opcodes))
+-              return 0;       /* Page fault may occur on this address. */
+-
+ retry:
+       if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
+               return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/olpc.c linux-2.6.29-rc3.owrt/arch/x86/kernel/olpc.c
+--- linux-2.6.29.owrt/arch/x86/kernel/olpc.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/olpc.c       2009-05-10 23:48:28.000000000 +0200
+@@ -203,7 +203,7 @@
+ static void __init platform_detect(void)
+ {
+       /* stopgap until OFW support is added to the kernel */
+-      olpc_platform_info.boardrev = olpc_board(0xc2);
++      olpc_platform_info.boardrev = 0xc2;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/paravirt.c linux-2.6.29-rc3.owrt/arch/x86/kernel/paravirt.c
+--- linux-2.6.29.owrt/arch/x86/kernel/paravirt.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/paravirt.c   2009-05-10 23:48:28.000000000 +0200
+@@ -268,32 +268,6 @@
+       return __get_cpu_var(paravirt_lazy_mode);
+ }
+-void arch_flush_lazy_mmu_mode(void)
+-{
+-      preempt_disable();
+-
+-      if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
+-              WARN_ON(preempt_count() == 1);
+-              arch_leave_lazy_mmu_mode();
+-              arch_enter_lazy_mmu_mode();
+-      }
+-
+-      preempt_enable();
+-}
+-
+-void arch_flush_lazy_cpu_mode(void)
+-{
+-      preempt_disable();
+-
+-      if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+-              WARN_ON(preempt_count() == 1);
+-              arch_leave_lazy_cpu_mode();
+-              arch_enter_lazy_cpu_mode();
+-      }
+-
+-      preempt_enable();
+-}
+-
+ struct pv_info pv_info = {
+       .name = "bare hardware",
+       .paravirt_enabled = 0,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/pci-gart_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/pci-gart_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/pci-gart_64.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/pci-gart_64.c        2009-05-10 23:48:28.000000000 +0200
+@@ -5,7 +5,7 @@
+  * This allows to use PCI devices that only support 32bit addresses on systems
+  * with more than 4GB.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification.
++ * See Documentation/DMA-mapping.txt for the interface specification.
+  *
+  * Copyright 2002 Andi Kleen, SuSE Labs.
+  * Subject to the GNU General Public License v2 only.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/process_32.c linux-2.6.29-rc3.owrt/arch/x86/kernel/process_32.c
+--- linux-2.6.29.owrt/arch/x86/kernel/process_32.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/process_32.c 2009-05-10 23:48:28.000000000 +0200
+@@ -104,6 +104,9 @@
+                       check_pgt_cache();
+                       rmb();
++                      if (rcu_pending(cpu))
++                              rcu_check_callbacks(cpu, 0);
++
+                       if (cpu_is_offline(cpu))
+                               play_dead();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/process_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/process_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/process_64.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/process_64.c 2009-05-10 23:48:28.000000000 +0200
+@@ -40,7 +40,6 @@
+ #include <linux/uaccess.h>
+ #include <linux/io.h>
+ #include <linux/ftrace.h>
+-#include <linux/dmi.h>
+ #include <asm/pgtable.h>
+ #include <asm/system.h>
+@@ -152,18 +151,14 @@
+       unsigned long d0, d1, d2, d3, d6, d7;
+       unsigned int fsindex, gsindex;
+       unsigned int ds, cs, es;
+-      const char *board;
+       printk("\n");
+       print_modules();
+-      board = dmi_get_system_info(DMI_PRODUCT_NAME);
+-      if (!board)
+-              board = "";
+-      printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n",
++      printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n",
+               current->pid, current->comm, print_tainted(),
+               init_utsname()->release,
+               (int)strcspn(init_utsname()->version, " "),
+-              init_utsname()->version, board);
++              init_utsname()->version);
+       printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+       printk_address(regs->ip, 1);
+       printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/process.c linux-2.6.29-rc3.owrt/arch/x86/kernel/process.c
+--- linux-2.6.29.owrt/arch/x86/kernel/process.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/process.c    2009-05-10 23:48:28.000000000 +0200
+@@ -180,9 +180,6 @@
+       trace_power_start(&it, POWER_CSTATE, (ax>>4)+1);
+       if (!need_resched()) {
+-              if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+-                      clflush((void *)&current_thread_info()->flags);
+-
+               __monitor((void *)&current_thread_info()->flags, 0, 0);
+               smp_mb();
+               if (!need_resched())
+@@ -197,9 +194,6 @@
+       struct power_trace it;
+       if (!need_resched()) {
+               trace_power_start(&it, POWER_CSTATE, 1);
+-              if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+-                      clflush((void *)&current_thread_info()->flags);
+-
+               __monitor((void *)&current_thread_info()->flags, 0, 0);
+               smp_mb();
+               if (!need_resched())
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/ptrace.c linux-2.6.29-rc3.owrt/arch/x86/kernel/ptrace.c
+--- linux-2.6.29.owrt/arch/x86/kernel/ptrace.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/ptrace.c     2009-05-10 23:48:28.000000000 +0200
+@@ -810,16 +810,12 @@
+ static void ptrace_bts_detach(struct task_struct *child)
+ {
+-      /*
+-       * Ptrace_detach() races with ptrace_untrace() in case
+-       * the child dies and is reaped by another thread.
+-       *
+-       * We only do the memory accounting at this point and
+-       * leave the buffer deallocation and the bts tracer
+-       * release to ptrace_bts_untrace() which will be called
+-       * later on with tasklist_lock held.
+-       */
+-      release_locked_buffer(child->bts_buffer, child->bts_size);
++      if (unlikely(child->bts)) {
++              ds_release_bts(child->bts);
++              child->bts = NULL;
++
++              ptrace_bts_free_buffer(child);
++      }
+ }
+ #else
+ static inline void ptrace_bts_fork(struct task_struct *tsk) {}
+@@ -1388,7 +1384,7 @@
+ #ifdef CONFIG_X86_32
+ # define IS_IA32      1
+ #elif defined CONFIG_IA32_EMULATION
+-# define IS_IA32      is_compat_task()
++# define IS_IA32      test_thread_flag(TIF_IA32)
+ #else
+ # define IS_IA32      0
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/reboot.c linux-2.6.29-rc3.owrt/arch/x86/kernel/reboot.c
+--- linux-2.6.29.owrt/arch/x86/kernel/reboot.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/reboot.c     2009-05-10 23:48:28.000000000 +0200
+@@ -217,14 +217,6 @@
+                       DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
+               },
+       },
+-      {       /* Handle problems with rebooting on Dell XPS710 */
+-              .callback = set_bios_reboot,
+-              .ident = "Dell XPS710",
+-              .matches = {
+-                      DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+-                      DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+-              },
+-      },
+       { }
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/setup.c linux-2.6.29-rc3.owrt/arch/x86/kernel/setup.c
+--- linux-2.6.29.owrt/arch/x86/kernel/setup.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/setup.c      2009-05-10 23:48:28.000000000 +0200
+@@ -607,7 +607,7 @@
+ static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+ {
+       printk(KERN_NOTICE
+-              "%s detected: BIOS may corrupt low RAM, working around it.\n",
++              "%s detected: BIOS may corrupt low RAM, working it around.\n",
+               d->ident);
+       e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+@@ -770,9 +770,6 @@
+       finish_e820_parsing();
+-      if (efi_enabled)
+-              efi_init();
+-
+       dmi_scan_machine();
+       dmi_check_system(bad_bios_dmi_table);
+@@ -792,6 +789,8 @@
+       insert_resource(&iomem_resource, &data_resource);
+       insert_resource(&iomem_resource, &bss_resource);
++      if (efi_enabled)
++              efi_init();
+ #ifdef CONFIG_X86_32
+       if (ppro_with_ram_bug()) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/time_64.c linux-2.6.29-rc3.owrt/arch/x86/kernel/time_64.c
+--- linux-2.6.29.owrt/arch/x86/kernel/time_64.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/time_64.c    2009-05-10 23:48:28.000000000 +0200
+@@ -115,7 +115,7 @@
+ static struct irqaction irq0 = {
+       .handler        = timer_interrupt,
+-      .flags          = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
++      .flags          = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
+       .mask           = CPU_MASK_NONE,
+       .name           = "timer"
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/traps.c linux-2.6.29-rc3.owrt/arch/x86/kernel/traps.c
+--- linux-2.6.29.owrt/arch/x86/kernel/traps.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/traps.c      2009-05-10 23:48:28.000000000 +0200
+@@ -99,12 +99,6 @@
+               local_irq_enable();
+ }
+-static inline void conditional_cli(struct pt_regs *regs)
+-{
+-      if (regs->flags & X86_EFLAGS_IF)
+-              local_irq_disable();
+-}
+-
+ static inline void preempt_conditional_cli(struct pt_regs *regs)
+ {
+       if (regs->flags & X86_EFLAGS_IF)
+@@ -632,10 +626,8 @@
+ #ifdef CONFIG_X86_32
+ debug_vm86:
+-      /* reenable preemption: handle_vm86_trap() might sleep */
+-      dec_preempt_count();
+       handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
+-      conditional_cli(regs);
++      preempt_conditional_cli(regs);
+       return;
+ #endif
+@@ -904,7 +896,7 @@
+ EXPORT_SYMBOL_GPL(math_state_restore);
+ #ifndef CONFIG_MATH_EMULATION
+-void math_emulate(struct math_emu_info *info)
++asmlinkage void math_emulate(long arg)
+ {
+       printk(KERN_EMERG
+               "math-emulation not enabled and no coprocessor found.\n");
+@@ -914,19 +906,16 @@
+ }
+ #endif /* CONFIG_MATH_EMULATION */
+-dotraplinkage void __kprobes do_device_not_available(struct pt_regs regs)
++dotraplinkage void __kprobes
++do_device_not_available(struct pt_regs *regs, long error)
+ {
+ #ifdef CONFIG_X86_32
+       if (read_cr0() & X86_CR0_EM) {
+-              struct math_emu_info info = { };
+-
+-              conditional_sti(&regs);
+-
+-              info.regs = &regs;
+-              math_emulate(&info);
++              conditional_sti(regs);
++              math_emulate(0);
+       } else {
+               math_state_restore(); /* interrupts still off */
+-              conditional_sti(&regs);
++              conditional_sti(regs);
+       }
+ #else
+       math_state_restore();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/tsc.c linux-2.6.29-rc3.owrt/arch/x86/kernel/tsc.c
+--- linux-2.6.29.owrt/arch/x86/kernel/tsc.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/tsc.c        2009-05-10 23:48:28.000000000 +0200
+@@ -273,43 +273,30 @@
+  * use the TSC value at the transitions to calculate a pretty
+  * good value for the TSC frequencty.
+  */
+-static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
++static inline int pit_expect_msb(unsigned char val)
+ {
+-      int count;
+-      u64 tsc = 0;
++      int count = 0;
+       for (count = 0; count < 50000; count++) {
+               /* Ignore LSB */
+               inb(0x42);
+               if (inb(0x42) != val)
+                       break;
+-              tsc = get_cycles();
+       }
+-      *deltap = get_cycles() - tsc;
+-      *tscp = tsc;
+-
+-      /*
+-       * We require _some_ success, but the quality control
+-       * will be based on the error terms on the TSC values.
+-       */
+-      return count > 5;
++      return count > 50;
+ }
+ /*
+- * How many MSB values do we want to see? We aim for
+- * a maximum error rate of 500ppm (in practice the
+- * real error is much smaller), but refuse to spend
+- * more than 25ms on it.
++ * How many MSB values do we want to see? We aim for a
++ * 15ms calibration, which assuming a 2us counter read
++ * error should give us roughly 150 ppm precision for
++ * the calibration.
+  */
+-#define MAX_QUICK_PIT_MS 25
+-#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
++#define QUICK_PIT_MS 15
++#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+ static unsigned long quick_pit_calibrate(void)
+ {
+-      int i;
+-      u64 tsc, delta;
+-      unsigned long d1, d2;
+-
+       /* Set the Gate high, disable speaker */
+       outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+@@ -328,52 +315,45 @@
+       outb(0xff, 0x42);
+       outb(0xff, 0x42);
+-      /*
+-       * The PIT starts counting at the next edge, so we
+-       * need to delay for a microsecond. The easiest way
+-       * to do that is to just read back the 16-bit counter
+-       * once from the PIT.
+-       */
+-      inb(0x42);
+-      inb(0x42);
+-
+-      if (pit_expect_msb(0xff, &tsc, &d1)) {
+-              for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+-                      if (!pit_expect_msb(0xff-i, &delta, &d2))
+-                              break;
+-
+-                      /*
+-                       * Iterate until the error is less than 500 ppm
+-                       */
+-                      delta -= tsc;
+-                      if (d1+d2 < delta >> 11)
+-                              goto success;
++      if (pit_expect_msb(0xff)) {
++              int i;
++              u64 t1, t2, delta;
++              unsigned char expect = 0xfe;
++
++              t1 = get_cycles();
++              for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
++                      if (!pit_expect_msb(expect))
++                              goto failed;
+               }
++              t2 = get_cycles();
++
++              /*
++               * Make sure we can rely on the second TSC timestamp:
++               */
++              if (!pit_expect_msb(expect))
++                      goto failed;
++
++              /*
++               * Ok, if we get here, then we've seen the
++               * MSB of the PIT decrement QUICK_PIT_ITERATIONS
++               * times, and each MSB had many hits, so we never
++               * had any sudden jumps.
++               *
++               * As a result, we can depend on there not being
++               * any odd delays anywhere, and the TSC reads are
++               * reliable.
++               *
++               * kHz = ticks / time-in-seconds / 1000;
++               * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
++               * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
++               */
++              delta = (t2 - t1)*PIT_TICK_RATE;
++              do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
++              printk("Fast TSC calibration using PIT\n");
++              return delta;
+       }
+-      printk("Fast TSC calibration failed\n");
++failed:
+       return 0;
+-
+-success:
+-      /*
+-       * Ok, if we get here, then we've seen the
+-       * MSB of the PIT decrement 'i' times, and the
+-       * error has shrunk to less than 500 ppm.
+-       *
+-       * As a result, we can depend on there not being
+-       * any odd delays anywhere, and the TSC reads are
+-       * reliable (within the error). We also adjust the
+-       * delta to the middle of the error bars, just
+-       * because it looks nicer.
+-       *
+-       * kHz = ticks / time-in-seconds / 1000;
+-       * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+-       * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+-       */
+-      delta += (long)(d2 - d1)/2;
+-      delta *= PIT_TICK_RATE;
+-      do_div(delta, i*256*1000);
+-      printk("Fast TSC calibration using PIT\n");
+-      return delta;
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/vmi_32.c linux-2.6.29-rc3.owrt/arch/x86/kernel/vmi_32.c
+--- linux-2.6.29.owrt/arch/x86/kernel/vmi_32.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/vmi_32.c     2009-05-10 23:48:28.000000000 +0200
+@@ -321,16 +321,6 @@
+ }
+ /*
+- * We use the pgd_free hook for releasing the pgd page:
+- */
+-static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+-{
+-      unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
+-
+-      vmi_ops.release_page(pfn, VMI_PAGE_L2);
+-}
+-
+-/*
+  * Helper macros for MMU update flags.  We can defer updates until a flush
+  * or page invalidation only if the update is to the current address space
+  * (otherwise, there is no flush).  We must check against init_mm, since
+@@ -772,7 +762,6 @@
+       if (vmi_ops.release_page) {
+               pv_mmu_ops.release_pte = vmi_release_pte;
+               pv_mmu_ops.release_pmd = vmi_release_pmd;
+-              pv_mmu_ops.pgd_free = vmi_pgd_free;
+       }
+       /* Set linear is needed in all cases */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kernel/vmiclock_32.c linux-2.6.29-rc3.owrt/arch/x86/kernel/vmiclock_32.c
+--- linux-2.6.29.owrt/arch/x86/kernel/vmiclock_32.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kernel/vmiclock_32.c        2009-05-10 23:48:28.000000000 +0200
+@@ -202,7 +202,7 @@
+ static struct irqaction vmi_clock_action  = {
+       .name           = "vmi-timer",
+       .handler        = vmi_timer_interrupt,
+-      .flags          = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
++      .flags          = IRQF_DISABLED | IRQF_NOBALANCING,
+       .mask           = CPU_MASK_ALL,
+ };
+@@ -283,13 +283,10 @@
+ #endif
+ /** vmi clocksource */
+-static struct clocksource clocksource_vmi;
+ static cycle_t read_real_cycles(void)
+ {
+-      cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+-      return ret >= clocksource_vmi.cycle_last ?
+-              ret : clocksource_vmi.cycle_last;
++      return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+ }
+ static struct clocksource clocksource_vmi = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/i8254.c linux-2.6.29-rc3.owrt/arch/x86/kvm/i8254.c
+--- linux-2.6.29.owrt/arch/x86/kvm/i8254.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/i8254.c 2009-05-10 23:48:28.000000000 +0200
+@@ -207,7 +207,7 @@
+       hrtimer_add_expires_ns(&pt->timer, pt->period);
+       pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
+       if (pt->period)
+-              ps->channels[0].count_load_time = ktime_get();
++              ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
+       return (pt->period == 0 ? 0 : 1);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/irq.c linux-2.6.29-rc3.owrt/arch/x86/kvm/irq.c
+--- linux-2.6.29.owrt/arch/x86/kvm/irq.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/irq.c   2009-05-10 23:48:28.000000000 +0200
+@@ -87,6 +87,13 @@
+ }
+ EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
++void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
++{
++      kvm_apic_timer_intr_post(vcpu, vec);
++      /* TODO: PIT, RTC etc. */
++}
++EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
++
+ void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
+ {
+       __kvm_migrate_apic_timer(vcpu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/irq.h linux-2.6.29-rc3.owrt/arch/x86/kvm/irq.h
+--- linux-2.6.29.owrt/arch/x86/kvm/irq.h       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/irq.h   2009-05-10 23:48:28.000000000 +0200
+@@ -89,6 +89,7 @@
+ void kvm_pic_reset(struct kvm_kpic_state *s);
++void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
+ void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
+ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
+ void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/lapic.c linux-2.6.29-rc3.owrt/arch/x86/kvm/lapic.c
+--- linux-2.6.29.owrt/arch/x86/kvm/lapic.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/lapic.c 2009-05-10 23:48:28.000000000 +0200
+@@ -35,12 +35,6 @@
+ #include "kvm_cache_regs.h"
+ #include "irq.h"
+-#ifndef CONFIG_X86_64
+-#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
+-#else
+-#define mod_64(x, y) ((x) % (y))
+-#endif
+-
+ #define PRId64 "d"
+ #define PRIx64 "llx"
+ #define PRIu64 "u"
+@@ -517,22 +511,52 @@
+ static u32 apic_get_tmcct(struct kvm_lapic *apic)
+ {
+-      ktime_t remaining;
+-      s64 ns;
++      u64 counter_passed;
++      ktime_t passed, now;
+       u32 tmcct;
+       ASSERT(apic != NULL);
++      now = apic->timer.dev.base->get_time();
++      tmcct = apic_get_reg(apic, APIC_TMICT);
++
+       /* if initial count is 0, current count should also be 0 */
+-      if (apic_get_reg(apic, APIC_TMICT) == 0)
++      if (tmcct == 0)
+               return 0;
+-      remaining = hrtimer_expires_remaining(&apic->timer.dev);
+-      if (ktime_to_ns(remaining) < 0)
+-              remaining = ktime_set(0, 0);
+-
+-      ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
+-      tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
++      if (unlikely(ktime_to_ns(now) <=
++              ktime_to_ns(apic->timer.last_update))) {
++              /* Wrap around */
++              passed = ktime_add(( {
++                                  (ktime_t) {
++                                  .tv64 = KTIME_MAX -
++                                  (apic->timer.last_update).tv64}; }
++                                 ), now);
++              apic_debug("time elapsed\n");
++      } else
++              passed = ktime_sub(now, apic->timer.last_update);
++
++      counter_passed = div64_u64(ktime_to_ns(passed),
++                                 (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
++
++      if (counter_passed > tmcct) {
++              if (unlikely(!apic_lvtt_period(apic))) {
++                      /* one-shot timers stick at 0 until reset */
++                      tmcct = 0;
++              } else {
++                      /*
++                       * periodic timers reset to APIC_TMICT when they
++                       * hit 0. The while loop simulates this happening N
++                       * times. (counter_passed %= tmcct) would also work,
++                       * but might be slower or not work on 32-bit??
++                       */
++                      while (counter_passed > tmcct)
++                              counter_passed -= tmcct;
++                      tmcct -= counter_passed;
++              }
++      } else {
++              tmcct -= counter_passed;
++      }
+       return tmcct;
+ }
+@@ -629,6 +653,8 @@
+ {
+       ktime_t now = apic->timer.dev.base->get_time();
++      apic->timer.last_update = now;
++
+       apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
+                   APIC_BUS_CYCLE_NS * apic->timer.divide_count;
+       atomic_set(&apic->timer.pending, 0);
+@@ -1084,6 +1110,16 @@
+       }
+ }
++void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
++{
++      struct kvm_lapic *apic = vcpu->arch.apic;
++
++      if (apic && apic_lvt_vector(apic, APIC_LVTT) == vec)
++              apic->timer.last_update = ktime_add_ns(
++                              apic->timer.last_update,
++                              apic->timer.period);
++}
++
+ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
+ {
+       int vector = kvm_apic_has_interrupt(vcpu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/lapic.h linux-2.6.29-rc3.owrt/arch/x86/kvm/lapic.h
+--- linux-2.6.29.owrt/arch/x86/kvm/lapic.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/lapic.h 2009-05-10 23:48:28.000000000 +0200
+@@ -12,6 +12,7 @@
+               atomic_t pending;
+               s64 period;     /* unit: ns */
+               u32 divide_count;
++              ktime_t last_update;
+               struct hrtimer dev;
+       } timer;
+       struct kvm_vcpu *vcpu;
+@@ -41,6 +42,7 @@
+ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
+ int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
+ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
++void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
+ void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
+ void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/mmu.c linux-2.6.29-rc3.owrt/arch/x86/kvm/mmu.c
+--- linux-2.6.29.owrt/arch/x86/kvm/mmu.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/mmu.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1698,13 +1698,8 @@
+       if (largepage)
+               spte |= PT_PAGE_SIZE_MASK;
+       if (mt_mask) {
+-              if (!kvm_is_mmio_pfn(pfn)) {
+-                      mt_mask = get_memory_type(vcpu, gfn) <<
+-                              kvm_x86_ops->get_mt_mask_shift();
+-                      mt_mask |= VMX_EPT_IGMT_BIT;
+-              } else
+-                      mt_mask = MTRR_TYPE_UNCACHABLE <<
+-                              kvm_x86_ops->get_mt_mask_shift();
++              mt_mask = get_memory_type(vcpu, gfn) <<
++                        kvm_x86_ops->get_mt_mask_shift();
+               spte |= mt_mask;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/svm.c linux-2.6.29-rc3.owrt/arch/x86/kvm/svm.c
+--- linux-2.6.29.owrt/arch/x86/kvm/svm.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/svm.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1600,6 +1600,7 @@
+       /* Okay, we can deliver the interrupt: grab it and update PIC state. */
+       intr_vector = kvm_cpu_get_interrupt(vcpu);
+       svm_inject_irq(svm, intr_vector);
++      kvm_timer_intr_post(vcpu, intr_vector);
+ out:
+       update_cr8_intercept(vcpu);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/vmx.c linux-2.6.29-rc3.owrt/arch/x86/kvm/vmx.c
+--- linux-2.6.29.owrt/arch/x86/kvm/vmx.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/vmx.c   2009-05-10 23:48:28.000000000 +0200
+@@ -903,7 +903,6 @@
+               data = vmcs_readl(GUEST_SYSENTER_ESP);
+               break;
+       default:
+-              vmx_load_host_state(to_vmx(vcpu));
+               msr = find_msr_entry(to_vmx(vcpu), msr_index);
+               if (msr) {
+                       data = msr->data;
+@@ -3286,6 +3285,7 @@
+       }
+       if (vcpu->arch.interrupt.pending) {
+               vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
++              kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
+               if (kvm_cpu_has_interrupt(vcpu))
+                       enable_irq_window(vcpu);
+       }
+@@ -3687,7 +3687,8 @@
+       if (vm_need_ept()) {
+               bypass_guest_pf = 0;
+               kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+-                      VMX_EPT_WRITABLE_MASK);
++                      VMX_EPT_WRITABLE_MASK |
++                      VMX_EPT_IGMT_BIT);
+               kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
+                               VMX_EPT_EXECUTABLE_MASK,
+                               VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/kvm/x86.c linux-2.6.29-rc3.owrt/arch/x86/kvm/x86.c
+--- linux-2.6.29.owrt/arch/x86/kvm/x86.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/kvm/x86.c   2009-05-10 23:48:28.000000000 +0200
+@@ -967,6 +967,7 @@
+       case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
+       case KVM_CAP_SET_TSS_ADDR:
+       case KVM_CAP_EXT_CPUID:
++      case KVM_CAP_CLOCKSOURCE:
+       case KVM_CAP_PIT:
+       case KVM_CAP_NOP_IO_DELAY:
+       case KVM_CAP_MP_STATE:
+@@ -991,9 +992,6 @@
+       case KVM_CAP_IOMMU:
+               r = iommu_found();
+               break;
+-      case KVM_CAP_CLOCKSOURCE:
+-              r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
+-              break;
+       default:
+               r = 0;
+               break;
+@@ -4129,13 +4127,9 @@
+ }
+-void kvm_arch_sync_events(struct kvm *kvm)
+-{
+-      kvm_free_all_assigned_devices(kvm);
+-}
+-
+ void kvm_arch_destroy_vm(struct kvm *kvm)
+ {
++      kvm_free_all_assigned_devices(kvm);
+       kvm_iommu_unmap_guest(kvm);
+       kvm_free_pit(kvm);
+       kfree(kvm->arch.vpic);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/lguest/boot.c linux-2.6.29-rc3.owrt/arch/x86/lguest/boot.c
+--- linux-2.6.29.owrt/arch/x86/lguest/boot.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/lguest/boot.c       2009-05-10 23:48:28.000000000 +0200
+@@ -343,11 +343,6 @@
+                * flush_tlb_user() for both user and kernel mappings unless
+                * the Page Global Enable (PGE) feature bit is set. */
+               *dx |= 0x00002000;
+-              /* We also lie, and say we're family id 5.  6 or greater
+-               * leads to a rdmsr in early_init_intel which we can't handle.
+-               * Family ID is returned as bits 8-12 in ax. */
+-              *ax &= 0xFFFFF0FF;
+-              *ax |= 0x00000500;
+               break;
+       case 0x80000000:
+               /* Futureproof this a little: if they ask how much extended
+@@ -594,21 +589,19 @@
+               /* Some systems map "vectors" to interrupts weirdly.  Lguest has
+                * a straightforward 1 to 1 mapping, so force that here. */
+               __get_cpu_var(vector_irq)[vector] = i;
+-              if (vector != SYSCALL_VECTOR)
+-                      set_intr_gate(vector, interrupt[i]);
++              if (vector != SYSCALL_VECTOR) {
++                      set_intr_gate(vector,
++                                    interrupt[vector-FIRST_EXTERNAL_VECTOR]);
++                      set_irq_chip_and_handler_name(i, &lguest_irq_controller,
++                                                    handle_level_irq,
++                                                    "level");
++              }
+       }
+       /* This call is required to set up for 4k stacks, where we have
+        * separate stacks for hard and soft interrupts. */
+       irq_ctx_init(smp_processor_id());
+ }
+-void lguest_setup_irq(unsigned int irq)
+-{
+-      irq_to_desc_alloc_cpu(irq, 0);
+-      set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+-                                    handle_level_irq, "level");
+-}
+-
+ /*
+  * Time.
+  *
+@@ -938,7 +931,7 @@
+  * that we can fit comfortably.
+  *
+  * First we need assembly templates of each of the patchable Guest operations,
+- * and these are in i386_head.S. */
++ * and these are in lguest_asm.S. */
+ /*G:060 We construct a table from the assembler templates: */
+ static const struct lguest_insns
+@@ -1100,7 +1093,7 @@
+       acpi_ht = 0;
+ #endif
+-      /* We set the preferred console to "hvc".  This is the "hypervisor
++      /* We set the perferred console to "hvc".  This is the "hypervisor
+        * virtual console" driver written by the PowerPC people, which we also
+        * adapted for lguest's use. */
+       add_preferred_console("hvc", 0, NULL);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mach-default/setup.c linux-2.6.29-rc3.owrt/arch/x86/mach-default/setup.c
+--- linux-2.6.29.owrt/arch/x86/mach-default/setup.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mach-default/setup.c        2009-05-10 23:48:28.000000000 +0200
+@@ -38,15 +38,6 @@
+       init_ISA_irqs();
+ }
+-/*
+- * IRQ2 is cascade interrupt to second interrupt controller
+- */
+-static struct irqaction irq2 = {
+-      .handler = no_action,
+-      .mask = CPU_MASK_NONE,
+-      .name = "cascade",
+-};
+-
+ /**
+  * intr_init_hook - post gate setup interrupt initialisation
+  *
+@@ -62,9 +53,6 @@
+               if (x86_quirks->arch_intr_init())
+                       return;
+       }
+-      if (!acpi_ioapic)
+-              setup_irq(2, &irq2);
+-
+ }
+ /**
+@@ -96,7 +84,7 @@
+ static struct irqaction irq0  = {
+       .handler = timer_interrupt,
+-      .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
++      .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+       .mask = CPU_MASK_NONE,
+       .name = "timer"
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mach-voyager/setup.c linux-2.6.29-rc3.owrt/arch/x86/mach-voyager/setup.c
+--- linux-2.6.29.owrt/arch/x86/mach-voyager/setup.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mach-voyager/setup.c        2009-05-10 23:48:28.000000000 +0200
+@@ -33,30 +33,20 @@
+       setup_irq(2, &irq2);
+ }
+-static void voyager_disable_tsc(void)
++void __init pre_setup_arch_hook(void)
+ {
+       /* Voyagers run their CPUs from independent clocks, so disable
+        * the TSC code because we can't sync them */
+       setup_clear_cpu_cap(X86_FEATURE_TSC);
+ }
+-void __init pre_setup_arch_hook(void)
+-{
+-      voyager_disable_tsc();
+-}
+-
+-void __init pre_time_init_hook(void)
+-{
+-      voyager_disable_tsc();
+-}
+-
+ void __init trap_init_hook(void)
+ {
+ }
+ static struct irqaction irq0 = {
+       .handler = timer_interrupt,
+-      .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
++      .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+       .mask = CPU_MASK_NONE,
+       .name = "timer"
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mach-voyager/voyager_smp.c linux-2.6.29-rc3.owrt/arch/x86/mach-voyager/voyager_smp.c
+--- linux-2.6.29.owrt/arch/x86/mach-voyager/voyager_smp.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mach-voyager/voyager_smp.c  2009-05-10 23:48:28.000000000 +0200
+@@ -65,7 +65,7 @@
+ /* Bitmask of CPUs present in the system - exported by i386_syms.c, used
+  * by scheduler but indexed physically */
+-static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE;
++cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+ /* The internal functions */
+ static void send_CPI(__u32 cpuset, __u8 cpi);
+@@ -81,7 +81,7 @@
+ static void disable_local_vic_irq(unsigned int irq);
+ static void before_handle_vic_irq(unsigned int irq);
+ static void after_handle_vic_irq(unsigned int irq);
+-static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask);
++static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask);
+ static void ack_vic_irq(unsigned int irq);
+ static void vic_enable_cpi(void);
+ static void do_boot_cpu(__u8 cpuid);
+@@ -211,6 +211,8 @@
+ static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
+ /* This is for the new dynamic CPU boot code */
++cpumask_t cpu_callin_map = CPU_MASK_NONE;
++cpumask_t cpu_callout_map = CPU_MASK_NONE;
+ /* The per processor IRQ masks (these are usually kept in sync) */
+ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
+@@ -366,19 +368,19 @@
+       /* set up everything for just this CPU, we can alter
+        * this as we start the other CPUs later */
+       /* now get the CPU disposition from the extended CMOS */
+-      cpus_addr(voyager_phys_cpu_present_map)[0] =
++      cpus_addr(phys_cpu_present_map)[0] =
+           voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
+-      cpus_addr(voyager_phys_cpu_present_map)[0] |=
++      cpus_addr(phys_cpu_present_map)[0] |=
+           voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
+-      cpus_addr(voyager_phys_cpu_present_map)[0] |=
++      cpus_addr(phys_cpu_present_map)[0] |=
+           voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
+                                      2) << 16;
+-      cpus_addr(voyager_phys_cpu_present_map)[0] |=
++      cpus_addr(phys_cpu_present_map)[0] |=
+           voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
+                                      3) << 24;
+-      init_cpu_possible(&voyager_phys_cpu_present_map);
+-      printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n",
+-             cpus_addr(voyager_phys_cpu_present_map)[0]);
++      cpu_possible_map = phys_cpu_present_map;
++      printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
++             cpus_addr(phys_cpu_present_map)[0]);
+       /* Here we set up the VIC to enable SMP */
+       /* enable the CPIs by writing the base vector to their register */
+       outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
+@@ -628,15 +630,15 @@
+               /* now that the cat has probed the Voyager System Bus, sanity
+                * check the cpu map */
+               if (((voyager_quad_processors | voyager_extended_vic_processors)
+-                   & cpus_addr(voyager_phys_cpu_present_map)[0]) !=
+-                  cpus_addr(voyager_phys_cpu_present_map)[0]) {
++                   & cpus_addr(phys_cpu_present_map)[0]) !=
++                  cpus_addr(phys_cpu_present_map)[0]) {
+                       /* should panic */
+                       printk("\n\n***WARNING*** "
+                              "Sanity check of CPU present map FAILED\n");
+               }
+       } else if (voyager_level == 4)
+               voyager_extended_vic_processors =
+-                  cpus_addr(voyager_phys_cpu_present_map)[0];
++                  cpus_addr(phys_cpu_present_map)[0];
+       /* this sets up the idle task to run on the current cpu */
+       voyager_extended_cpus = 1;
+@@ -670,7 +672,7 @@
+       /* loop over all the extended VIC CPUs and boot them.  The
+        * Quad CPUs must be bootstrapped by their extended VIC cpu */
+       for (i = 0; i < nr_cpu_ids; i++) {
+-              if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map))
++              if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+                       continue;
+               do_boot_cpu(i);
+               /* This udelay seems to be needed for the Quad boots
+@@ -1597,16 +1599,16 @@
+  * change the mask and then do an interrupt enable CPI to re-enable on
+  * the selected processors */
+-void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask)
++void set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
+ {
+       /* Only extended processors handle interrupts */
+       unsigned long real_mask;
+       unsigned long irq_mask = 1 << irq;
+       int cpu;
+-      real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors;
++      real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors;
+-      if (cpus_addr(*mask)[0] == 0)
++      if (cpus_addr(mask)[0] == 0)
+               /* can't have no CPUs to accept the interrupt -- extremely
+                * bad things will happen */
+               return;
+@@ -1748,11 +1750,10 @@
+       init_gdt(smp_processor_id());
+       switch_to_new_gdt();
+-      cpu_online_map = cpumask_of_cpu(smp_processor_id());
+-      cpu_callout_map = cpumask_of_cpu(smp_processor_id());
+-      cpu_callin_map = CPU_MASK_NONE;
+-      cpu_present_map = cpumask_of_cpu(smp_processor_id());
+-
++      cpu_set(smp_processor_id(), cpu_online_map);
++      cpu_set(smp_processor_id(), cpu_callout_map);
++      cpu_set(smp_processor_id(), cpu_possible_map);
++      cpu_set(smp_processor_id(), cpu_present_map);
+ }
+ static int __cpuinit voyager_cpu_up(unsigned int cpu)
+@@ -1782,9 +1783,9 @@
+       x86_write_percpu(cpu_number, hard_smp_processor_id());
+ }
+-static void voyager_send_call_func(const struct cpumask *callmask)
++static void voyager_send_call_func(cpumask_t callmask)
+ {
+-      __u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id());
++      __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id());
+       send_CPI(mask, VIC_CALL_FUNCTION_CPI);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/math-emu/fpu_aux.c linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_aux.c
+--- linux-2.6.29.owrt/arch/x86/math-emu/fpu_aux.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_aux.c  2009-05-10 23:48:28.000000000 +0200
+@@ -30,29 +30,20 @@
+ }
+ /* Needs to be externally visible */
+-void finit_task(struct task_struct *tsk)
++void finit(void)
+ {
+-      struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+-      struct address *oaddr, *iaddr;
+-      soft->cwd = 0x037f;
+-      soft->swd = 0;
+-      soft->ftop = 0; /* We don't keep top in the status word internally. */
+-      soft->twd = 0xffff;
++      control_word = 0x037f;
++      partial_status = 0;
++      top = 0;                /* We don't keep top in the status word internally. */
++      fpu_tag_word = 0xffff;
+       /* The behaviour is different from that detailed in
+          Section 15.1.6 of the Intel manual */
+-      oaddr = (struct address *)&soft->foo;
+-      oaddr->offset = 0;
+-      oaddr->selector = 0;
+-      iaddr = (struct address *)&soft->fip;
+-      iaddr->offset = 0;
+-      iaddr->selector = 0;
+-      iaddr->opcode = 0;
+-      soft->no_update = 1;
+-}
+-
+-void finit(void)
+-{
+-      finit_task(current);
++      operand_address.offset = 0;
++      operand_address.selector = 0;
++      instruction_address.offset = 0;
++      instruction_address.selector = 0;
++      instruction_address.opcode = 0;
++      no_ip_update = 1;
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/math-emu/fpu_entry.c linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_entry.c
+--- linux-2.6.29.owrt/arch/x86/math-emu/fpu_entry.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_entry.c        2009-05-10 23:48:28.000000000 +0200
+@@ -131,7 +131,7 @@
+ static int valid_prefix(u_char *Byte, u_char __user ** fpu_eip,
+                       overrides * override);
+-void math_emulate(struct math_emu_info *info)
++asmlinkage void math_emulate(long arg)
+ {
+       u_char FPU_modrm, byte1;
+       unsigned short code;
+@@ -161,7 +161,7 @@
+       RE_ENTRANT_CHECK_ON;
+ #endif /* RE_ENTRANT_CHECKING */
+-      FPU_info = info;
++      SETUP_DATA_AREA(arg);
+       FPU_ORIG_EIP = FPU_EIP;
+@@ -659,7 +659,7 @@
+       }
+ }
+-void math_abort(struct math_emu_info *info, unsigned int signal)
++void math_abort(struct info *info, unsigned int signal)
+ {
+       FPU_EIP = FPU_ORIG_EIP;
+       current->thread.trap_no = 16;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/math-emu/fpu_proto.h linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_proto.h
+--- linux-2.6.29.owrt/arch/x86/math-emu/fpu_proto.h    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_proto.h        2009-05-10 23:48:28.000000000 +0200
+@@ -51,8 +51,8 @@
+ extern void fst_i_(void);
+ extern void fstp_i(void);
+ /* fpu_entry.c */
+-extern void math_emulate(struct math_emu_info *info);
+-extern void math_abort(struct math_emu_info *info, unsigned int signal);
++asmlinkage extern void math_emulate(long arg);
++extern void math_abort(struct info *info, unsigned int signal);
+ /* fpu_etc.c */
+ extern void FPU_etc(void);
+ /* fpu_tags.c */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/math-emu/fpu_system.h linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_system.h
+--- linux-2.6.29.owrt/arch/x86/math-emu/fpu_system.h   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/math-emu/fpu_system.h       2009-05-10 23:48:28.000000000 +0200
+@@ -16,6 +16,10 @@
+ #include <linux/kernel.h>
+ #include <linux/mm.h>
++/* This sets the pointer FPU_info to point to the argument part
++   of the stack frame of math_emulate() */
++#define SETUP_DATA_AREA(arg)  FPU_info = (struct info *) &arg
++
+ /* s is always from a cpu register, and the cpu does bounds checking
+  * during register load --> no further bounds checks needed */
+ #define LDT_DESCRIPTOR(s)     (((struct desc_struct *)current->mm->context.ldt)[(s) >> 3])
+@@ -34,12 +38,12 @@
+ #define I387                  (current->thread.xstate)
+ #define FPU_info              (I387->soft.info)
+-#define FPU_CS                        (*(unsigned short *) &(FPU_info->regs->cs))
+-#define FPU_SS                        (*(unsigned short *) &(FPU_info->regs->ss))
+-#define FPU_DS                        (*(unsigned short *) &(FPU_info->regs->ds))
+-#define FPU_EAX                       (FPU_info->regs->ax)
+-#define FPU_EFLAGS            (FPU_info->regs->flags)
+-#define FPU_EIP                       (FPU_info->regs->ip)
++#define FPU_CS                        (*(unsigned short *) &(FPU_info->___cs))
++#define FPU_SS                        (*(unsigned short *) &(FPU_info->___ss))
++#define FPU_DS                        (*(unsigned short *) &(FPU_info->___ds))
++#define FPU_EAX                       (FPU_info->___eax)
++#define FPU_EFLAGS            (FPU_info->___eflags)
++#define FPU_EIP                       (FPU_info->___eip)
+ #define FPU_ORIG_EIP          (FPU_info->___orig_eip)
+ #define FPU_lookahead           (I387->soft.lookahead)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/math-emu/get_address.c linux-2.6.29-rc3.owrt/arch/x86/math-emu/get_address.c
+--- linux-2.6.29.owrt/arch/x86/math-emu/get_address.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/math-emu/get_address.c      2009-05-10 23:48:28.000000000 +0200
+@@ -29,43 +29,46 @@
+ #define FPU_WRITE_BIT 0x10
+ static int reg_offset[] = {
+-      offsetof(struct pt_regs, ax),
+-      offsetof(struct pt_regs, cx),
+-      offsetof(struct pt_regs, dx),
+-      offsetof(struct pt_regs, bx),
+-      offsetof(struct pt_regs, sp),
+-      offsetof(struct pt_regs, bp),
+-      offsetof(struct pt_regs, si),
+-      offsetof(struct pt_regs, di)
++      offsetof(struct info, ___eax),
++      offsetof(struct info, ___ecx),
++      offsetof(struct info, ___edx),
++      offsetof(struct info, ___ebx),
++      offsetof(struct info, ___esp),
++      offsetof(struct info, ___ebp),
++      offsetof(struct info, ___esi),
++      offsetof(struct info, ___edi)
+ };
+-#define REG_(x) (*(long *)(reg_offset[(x)] + (u_char *)FPU_info->regs))
++#define REG_(x) (*(long *)(reg_offset[(x)]+(u_char *) FPU_info))
+ static int reg_offset_vm86[] = {
+-      offsetof(struct pt_regs, cs),
+-      offsetof(struct kernel_vm86_regs, ds),
+-      offsetof(struct kernel_vm86_regs, es),
+-      offsetof(struct kernel_vm86_regs, fs),
+-      offsetof(struct kernel_vm86_regs, gs),
+-      offsetof(struct pt_regs, ss),
+-      offsetof(struct kernel_vm86_regs, ds)
++      offsetof(struct info, ___cs),
++      offsetof(struct info, ___vm86_ds),
++      offsetof(struct info, ___vm86_es),
++      offsetof(struct info, ___vm86_fs),
++      offsetof(struct info, ___vm86_gs),
++      offsetof(struct info, ___ss),
++      offsetof(struct info, ___vm86_ds)
+ };
+ #define VM86_REG_(x) (*(unsigned short *) \
+-              (reg_offset_vm86[((unsigned)x)] + (u_char *)FPU_info->regs))
++                    (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info))
++
++/* This dummy, gs is not saved on the stack. */
++#define ___GS ___ds
+ static int reg_offset_pm[] = {
+-      offsetof(struct pt_regs, cs),
+-      offsetof(struct pt_regs, ds),
+-      offsetof(struct pt_regs, es),
+-      offsetof(struct pt_regs, fs),
+-      offsetof(struct pt_regs, ds),   /* dummy, not saved on stack */
+-      offsetof(struct pt_regs, ss),
+-      offsetof(struct pt_regs, ds)
++      offsetof(struct info, ___cs),
++      offsetof(struct info, ___ds),
++      offsetof(struct info, ___es),
++      offsetof(struct info, ___fs),
++      offsetof(struct info, ___GS),
++      offsetof(struct info, ___ss),
++      offsetof(struct info, ___ds)
+ };
+ #define PM_REG_(x) (*(unsigned short *) \
+-              (reg_offset_pm[((unsigned)x)] + (u_char *)FPU_info->regs))
++                    (reg_offset_pm[((unsigned)x)]+(u_char *) FPU_info))
+ /* Decode the SIB byte. This function assumes mod != 0 */
+ static int sib(int mod, unsigned long *fpu_eip)
+@@ -346,34 +349,34 @@
+       }
+       switch (rm) {
+       case 0:
+-              address += FPU_info->regs->bx + FPU_info->regs->si;
++              address += FPU_info->___ebx + FPU_info->___esi;
+               break;
+       case 1:
+-              address += FPU_info->regs->bx + FPU_info->regs->di;
++              address += FPU_info->___ebx + FPU_info->___edi;
+               break;
+       case 2:
+-              address += FPU_info->regs->bp + FPU_info->regs->si;
++              address += FPU_info->___ebp + FPU_info->___esi;
+               if (addr_modes.override.segment == PREFIX_DEFAULT)
+                       addr_modes.override.segment = PREFIX_SS_;
+               break;
+       case 3:
+-              address += FPU_info->regs->bp + FPU_info->regs->di;
++              address += FPU_info->___ebp + FPU_info->___edi;
+               if (addr_modes.override.segment == PREFIX_DEFAULT)
+                       addr_modes.override.segment = PREFIX_SS_;
+               break;
+       case 4:
+-              address += FPU_info->regs->si;
++              address += FPU_info->___esi;
+               break;
+       case 5:
+-              address += FPU_info->regs->di;
++              address += FPU_info->___edi;
+               break;
+       case 6:
+-              address += FPU_info->regs->bp;
++              address += FPU_info->___ebp;
+               if (addr_modes.override.segment == PREFIX_DEFAULT)
+                       addr_modes.override.segment = PREFIX_SS_;
+               break;
+       case 7:
+-              address += FPU_info->regs->bx;
++              address += FPU_info->___ebx;
+               break;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/fault.c linux-2.6.29-rc3.owrt/arch/x86/mm/fault.c
+--- linux-2.6.29.owrt/arch/x86/mm/fault.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/fault.c  2009-05-10 23:48:28.000000000 +0200
+@@ -603,6 +603,8 @@
+       si_code = SEGV_MAPERR;
++      if (notify_page_fault(regs))
++              return;
+       if (unlikely(kmmio_fault(regs, address)))
+               return;
+@@ -632,9 +634,6 @@
+               if (spurious_fault(address, error_code))
+                       return;
+-              /* kprobes don't want to hook the spurious faults. */
+-              if (notify_page_fault(regs))
+-                      return;
+               /*
+                * Don't take the mm semaphore here. If we fixup a prefetch
+                * fault we could otherwise deadlock.
+@@ -642,9 +641,6 @@
+               goto bad_area_nosemaphore;
+       }
+-      /* kprobes don't want to hook the spurious faults. */
+-      if (notify_page_fault(regs))
+-              return;
+       /*
+        * It's safe to allow irq's after cr2 has been saved and the
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/init_64.c linux-2.6.29-rc3.owrt/arch/x86/mm/init_64.c
+--- linux-2.6.29.owrt/arch/x86/mm/init_64.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/init_64.c        2009-05-10 23:48:28.000000000 +0200
+@@ -714,8 +714,6 @@
+       pos = start_pfn << PAGE_SHIFT;
+       end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
+                       << (PMD_SHIFT - PAGE_SHIFT);
+-      if (end_pfn > (end >> PAGE_SHIFT))
+-              end_pfn = end >> PAGE_SHIFT;
+       if (start_pfn < end_pfn) {
+               nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
+               pos = end_pfn << PAGE_SHIFT;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/iomap_32.c linux-2.6.29-rc3.owrt/arch/x86/mm/iomap_32.c
+--- linux-2.6.29.owrt/arch/x86/mm/iomap_32.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/iomap_32.c       2009-05-10 23:48:28.000000000 +0200
+@@ -20,17 +20,6 @@
+ #include <asm/pat.h>
+ #include <linux/module.h>
+-int is_io_mapping_possible(resource_size_t base, unsigned long size)
+-{
+-#ifndef CONFIG_X86_PAE
+-      /* There is no way to map greater than 1 << 32 address without PAE */
+-      if (base + size > 0x100000000ULL)
+-              return 0;
+-#endif
+-      return 1;
+-}
+-EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+-
+ /* Map 'pfn' using fixed map 'type' and protections 'prot'
+  */
+ void *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/ioremap.c linux-2.6.29-rc3.owrt/arch/x86/mm/ioremap.c
+--- linux-2.6.29.owrt/arch/x86/mm/ioremap.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/ioremap.c        2009-05-10 23:48:28.000000000 +0200
+@@ -134,6 +134,25 @@
+       return 0;
+ }
++int pagerange_is_ram(unsigned long start, unsigned long end)
++{
++      int ram_page = 0, not_rampage = 0;
++      unsigned long page_nr;
++
++      for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
++           ++page_nr) {
++              if (page_is_ram(page_nr))
++                      ram_page = 1;
++              else
++                      not_rampage = 1;
++
++              if (ram_page == not_rampage)
++                      return -1;
++      }
++
++      return ram_page;
++}
++
+ /*
+  * Fix up the linear direct mapping of the kernel to avoid cache attribute
+  * conflicts.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/kmmio.c linux-2.6.29-rc3.owrt/arch/x86/mm/kmmio.c
+--- linux-2.6.29.owrt/arch/x86/mm/kmmio.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/kmmio.c  2009-05-10 23:48:28.000000000 +0200
+@@ -32,14 +32,11 @@
+       struct list_head list;
+       struct kmmio_fault_page *release_next;
+       unsigned long page; /* location of the fault page */
+-      bool old_presence; /* page presence prior to arming */
+-      bool armed;
+       /*
+        * Number of times this page has been registered as a part
+        * of a probe. If zero, page is disarmed and this may be freed.
+-       * Used only by writers (RCU) and post_kmmio_handler().
+-       * Protected by kmmio_lock, when linked into kmmio_page_table.
++       * Used only by writers (RCU).
+        */
+       int count;
+ };
+@@ -108,85 +105,57 @@
+       return NULL;
+ }
+-static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+-{
+-      pmdval_t v = pmd_val(*pmd);
+-      *old = !!(v & _PAGE_PRESENT);
+-      v &= ~_PAGE_PRESENT;
+-      if (present)
+-              v |= _PAGE_PRESENT;
+-      set_pmd(pmd, __pmd(v));
+-}
+-
+-static void set_pte_presence(pte_t *pte, bool present, bool *old)
+-{
+-      pteval_t v = pte_val(*pte);
+-      *old = !!(v & _PAGE_PRESENT);
+-      v &= ~_PAGE_PRESENT;
+-      if (present)
+-              v |= _PAGE_PRESENT;
+-      set_pte_atomic(pte, __pte(v));
+-}
+-
+-static int set_page_presence(unsigned long addr, bool present, bool *old)
++static void set_page_present(unsigned long addr, bool present,
++                                                      unsigned int *pglevel)
+ {
++      pteval_t pteval;
++      pmdval_t pmdval;
+       unsigned int level;
++      pmd_t *pmd;
+       pte_t *pte = lookup_address(addr, &level);
+       if (!pte) {
+               pr_err("kmmio: no pte for page 0x%08lx\n", addr);
+-              return -1;
++              return;
+       }
++      if (pglevel)
++              *pglevel = level;
++
+       switch (level) {
+       case PG_LEVEL_2M:
+-              set_pmd_presence((pmd_t *)pte, present, old);
++              pmd = (pmd_t *)pte;
++              pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
++              if (present)
++                      pmdval |= _PAGE_PRESENT;
++              set_pmd(pmd, __pmd(pmdval));
+               break;
++
+       case PG_LEVEL_4K:
+-              set_pte_presence(pte, present, old);
++              pteval = pte_val(*pte) & ~_PAGE_PRESENT;
++              if (present)
++                      pteval |= _PAGE_PRESENT;
++              set_pte_atomic(pte, __pte(pteval));
+               break;
++
+       default:
+               pr_err("kmmio: unexpected page level 0x%x.\n", level);
+-              return -1;
++              return;
+       }
+       __flush_tlb_one(addr);
+-      return 0;
+ }
+-/*
+- * Mark the given page as not present. Access to it will trigger a fault.
+- *
+- * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
+- * protection is ignored here. RCU read lock is assumed held, so the struct
+- * will not disappear unexpectedly. Furthermore, the caller must guarantee,
+- * that double arming the same virtual address (page) cannot occur.
+- *
+- * Double disarming on the other hand is allowed, and may occur when a fault
+- * and mmiotrace shutdown happen simultaneously.
+- */
+-static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
++/** Mark the given page as not present. Access to it will trigger a fault. */
++static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+ {
+-      int ret;
+-      WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+-      if (f->armed) {
+-              pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
+-                                      f->page, f->count, f->old_presence);
+-      }
+-      ret = set_page_presence(f->page, false, &f->old_presence);
+-      WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+-      f->armed = true;
+-      return ret;
++      set_page_present(page & PAGE_MASK, false, pglevel);
+ }
+-/** Restore the given page to saved presence state. */
+-static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
++/** Mark the given page as present. */
++static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+ {
+-      bool tmp;
+-      int ret = set_page_presence(f->page, f->old_presence, &tmp);
+-      WARN_ONCE(ret < 0,
+-                      KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+-      f->armed = false;
++      set_page_present(page & PAGE_MASK, true, pglevel);
+ }
+ /*
+@@ -233,32 +202,28 @@
+       ctx = &get_cpu_var(kmmio_ctx);
+       if (ctx->active) {
++              disarm_kmmio_fault_page(faultpage->page, NULL);
+               if (addr == ctx->addr) {
+                       /*
+-                       * A second fault on the same page means some other
+-                       * condition needs handling by do_page_fault(), the
+-                       * page really not being present is the most common.
++                       * On SMP we sometimes get recursive probe hits on the
++                       * same address. Context is already saved, fall out.
+                        */
+-                      pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
+-                                      addr, smp_processor_id());
+-
+-                      if (!faultpage->old_presence)
+-                              pr_info("kmmio: unexpected secondary hit for "
+-                                      "address 0x%08lx on CPU %d.\n", addr,
+-                                      smp_processor_id());
+-              } else {
+-                      /*
+-                       * Prevent overwriting already in-flight context.
+-                       * This should not happen, let's hope disarming at
+-                       * least prevents a panic.
+-                       */
+-                      pr_emerg("kmmio: recursive probe hit on CPU %d, "
++                      pr_debug("kmmio: duplicate probe hit on CPU %d, for "
++                                              "address 0x%08lx.\n",
++                                              smp_processor_id(), addr);
++                      ret = 1;
++                      goto no_kmmio_ctx;
++              }
++              /*
++               * Prevent overwriting already in-flight context.
++               * This should not happen, let's hope disarming at least
++               * prevents a panic.
++               */
++              pr_emerg("kmmio: recursive probe hit on CPU %d, "
+                                       "for address 0x%08lx. Ignoring.\n",
+                                       smp_processor_id(), addr);
+-                      pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+-                                              ctx->addr);
+-                      disarm_kmmio_fault_page(faultpage);
+-              }
++              pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
++                                      ctx->addr);
+               goto no_kmmio_ctx;
+       }
+       ctx->active++;
+@@ -279,7 +244,7 @@
+       regs->flags &= ~X86_EFLAGS_IF;
+       /* Now we set present bit in PTE and single step. */
+-      disarm_kmmio_fault_page(ctx->fpage);
++      disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+       /*
+        * If another cpu accesses the same page while we are stepping,
+@@ -310,7 +275,7 @@
+       struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
+       if (!ctx->active) {
+-              pr_warning("kmmio: spurious debug trap on CPU %d.\n",
++              pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+                                                       smp_processor_id());
+               goto out;
+       }
+@@ -318,11 +283,7 @@
+       if (ctx->probe && ctx->probe->post_handler)
+               ctx->probe->post_handler(ctx->probe, condition, regs);
+-      /* Prevent racing against release_kmmio_fault_page(). */
+-      spin_lock(&kmmio_lock);
+-      if (ctx->fpage->count)
+-              arm_kmmio_fault_page(ctx->fpage);
+-      spin_unlock(&kmmio_lock);
++      arm_kmmio_fault_page(ctx->fpage->page, NULL);
+       regs->flags &= ~X86_EFLAGS_TF;
+       regs->flags |= ctx->saved_flags;
+@@ -354,25 +315,21 @@
+       f = get_kmmio_fault_page(page);
+       if (f) {
+               if (!f->count)
+-                      arm_kmmio_fault_page(f);
++                      arm_kmmio_fault_page(f->page, NULL);
+               f->count++;
+               return 0;
+       }
+-      f = kzalloc(sizeof(*f), GFP_ATOMIC);
++      f = kmalloc(sizeof(*f), GFP_ATOMIC);
+       if (!f)
+               return -1;
+       f->count = 1;
+       f->page = page;
+-
+-      if (arm_kmmio_fault_page(f)) {
+-              kfree(f);
+-              return -1;
+-      }
+-
+       list_add_rcu(&f->list, kmmio_page_list(f->page));
++      arm_kmmio_fault_page(f->page, NULL);
++
+       return 0;
+ }
+@@ -390,7 +347,7 @@
+       f->count--;
+       BUG_ON(f->count < 0);
+       if (!f->count) {
+-              disarm_kmmio_fault_page(f);
++              disarm_kmmio_fault_page(f->page, NULL);
+               f->release_next = *release_list;
+               *release_list = f;
+       }
+@@ -451,24 +408,23 @@
+ static void remove_kmmio_fault_pages(struct rcu_head *head)
+ {
+-      struct kmmio_delayed_release *dr =
+-              container_of(head, struct kmmio_delayed_release, rcu);
++      struct kmmio_delayed_release *dr = container_of(
++                                              head,
++                                              struct kmmio_delayed_release,
++                                              rcu);
+       struct kmmio_fault_page *p = dr->release_list;
+       struct kmmio_fault_page **prevp = &dr->release_list;
+       unsigned long flags;
+-
+       spin_lock_irqsave(&kmmio_lock, flags);
+       while (p) {
+-              if (!p->count) {
++              if (!p->count)
+                       list_del_rcu(&p->list);
+-                      prevp = &p->release_next;
+-              } else {
++              else
+                       *prevp = p->release_next;
+-              }
++              prevp = &p->release_next;
+               p = p->release_next;
+       }
+       spin_unlock_irqrestore(&kmmio_lock, flags);
+-
+       /* This is the real RCU destroy call. */
+       call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/numa_64.c linux-2.6.29-rc3.owrt/arch/x86/mm/numa_64.c
+--- linux-2.6.29.owrt/arch/x86/mm/numa_64.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/numa_64.c        2009-05-10 23:48:28.000000000 +0200
+@@ -145,7 +145,7 @@
+       return shift;
+ }
+-int __meminit  __early_pfn_to_nid(unsigned long pfn)
++int early_pfn_to_nid(unsigned long pfn)
+ {
+       return phys_to_nid(pfn << PAGE_SHIFT);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/pageattr.c linux-2.6.29-rc3.owrt/arch/x86/mm/pageattr.c
+--- linux-2.6.29.owrt/arch/x86/mm/pageattr.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/pageattr.c       2009-05-10 23:48:28.000000000 +0200
+@@ -508,24 +508,18 @@
+ #endif
+       /*
+-       * Install the new, split up pagetable.
++       * Install the new, split up pagetable. Important details here:
+        *
+-       * We use the standard kernel pagetable protections for the new
+-       * pagetable protections, the actual ptes set above control the
+-       * primary protection behavior:
+-       */
+-      __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+-
+-      /*
+-       * Intel Atom errata AAH41 workaround.
++       * On Intel the NX bit of all levels must be cleared to make a
++       * page executable. See section 4.13.2 of Intel 64 and IA-32
++       * Architectures Software Developer's Manual).
+        *
+-       * The real fix should be in hw or in a microcode update, but
+-       * we also probabilistically try to reduce the window of having
+-       * a large TLB mixed with 4K TLBs while instruction fetches are
+-       * going on.
++       * Mark the entry present. The current mapping might be
++       * set to not present, which we preserved above.
+        */
+-      __flush_tlb_all();
+-
++      ref_prot = pte_pgprot(pte_mkexec(pte_clrhuge(*kpte)));
++      pgprot_val(ref_prot) |= _PAGE_PRESENT;
++      __set_pmd_pte(kpte, address, mk_pte(base, ref_prot));
+       base = NULL;
+ out_unlock:
+@@ -581,6 +575,7 @@
+               address = cpa->vaddr[cpa->curpage];
+       else
+               address = *cpa->vaddr;
++
+ repeat:
+       kpte = lookup_address(address, &level);
+       if (!kpte)
+@@ -817,13 +812,6 @@
+       vm_unmap_aliases();
+-      /*
+-       * If we're called with lazy mmu updates enabled, the
+-       * in-memory pte state may be stale.  Flush pending updates to
+-       * bring them up to date.
+-       */
+-      arch_flush_lazy_mmu_mode();
+-
+       cpa.vaddr = addr;
+       cpa.numpages = numpages;
+       cpa.mask_set = mask_set;
+@@ -866,13 +854,6 @@
+       } else
+               cpa_flush_all(cache);
+-      /*
+-       * If we've been called with lazy mmu updates enabled, then
+-       * make sure that everything gets flushed out before we
+-       * return.
+-       */
+-      arch_flush_lazy_mmu_mode();
+-
+ out:
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/pat.c linux-2.6.29-rc3.owrt/arch/x86/mm/pat.c
+--- linux-2.6.29.owrt/arch/x86/mm/pat.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/pat.c    2009-05-10 23:48:28.000000000 +0200
+@@ -11,7 +11,6 @@
+ #include <linux/bootmem.h>
+ #include <linux/debugfs.h>
+ #include <linux/kernel.h>
+-#include <linux/module.h>
+ #include <linux/gfp.h>
+ #include <linux/mm.h>
+ #include <linux/fs.h>
+@@ -212,33 +211,6 @@
+ static struct memtype *cached_entry;
+ static u64 cached_start;
+-static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
+-{
+-      int ram_page = 0, not_rampage = 0;
+-      unsigned long page_nr;
+-
+-      for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
+-           ++page_nr) {
+-              /*
+-               * For legacy reasons, physical address range in the legacy ISA
+-               * region is tracked as non-RAM. This will allow users of
+-               * /dev/mem to map portions of legacy ISA region, even when
+-               * some of those portions are listed(or not even listed) with
+-               * different e820 types(RAM/reserved/..)
+-               */
+-              if (page_nr >= (ISA_END_ADDRESS >> PAGE_SHIFT) &&
+-                  page_is_ram(page_nr))
+-                      ram_page = 1;
+-              else
+-                      not_rampage = 1;
+-
+-              if (ram_page == not_rampage)
+-                      return -1;
+-      }
+-
+-      return ram_page;
+-}
+-
+ /*
+  * For RAM pages, mark the pages as non WB memory type using
+  * PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
+@@ -364,12 +336,20 @@
+       if (new_type)
+               *new_type = actual_type;
+-      is_range_ram = pat_pagerange_is_ram(start, end);
+-      if (is_range_ram == 1)
+-              return reserve_ram_pages_type(start, end, req_type,
+-                                            new_type);
+-      else if (is_range_ram < 0)
+-              return -EINVAL;
++      /*
++       * For legacy reasons, some parts of the physical address range in the
++       * legacy 1MB region is treated as non-RAM (even when listed as RAM in
++       * the e820 tables).  So we will track the memory attributes of this
++       * legacy 1MB region using the linear memtype_list always.
++       */
++      if (end >= ISA_END_ADDRESS) {
++              is_range_ram = pagerange_is_ram(start, end);
++              if (is_range_ram == 1)
++                      return reserve_ram_pages_type(start, end, req_type,
++                                                    new_type);
++              else if (is_range_ram < 0)
++                      return -EINVAL;
++      }
+       new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+       if (!new)
+@@ -466,11 +446,19 @@
+       if (is_ISA_range(start, end - 1))
+               return 0;
+-      is_range_ram = pat_pagerange_is_ram(start, end);
+-      if (is_range_ram == 1)
+-              return free_ram_pages_type(start, end);
+-      else if (is_range_ram < 0)
+-              return -EINVAL;
++      /*
++       * For legacy reasons, some parts of the physical address range in the
++       * legacy 1MB region is treated as non-RAM (even when listed as RAM in
++       * the e820 tables).  So we will track the memory attributes of this
++       * legacy 1MB region using the linear memtype_list always.
++       */
++      if (end >= ISA_END_ADDRESS) {
++              is_range_ram = pagerange_is_ram(start, end);
++              if (is_range_ram == 1)
++                      return free_ram_pages_type(start, end);
++              else if (is_range_ram < 0)
++                      return -EINVAL;
++      }
+       spin_lock(&memtype_lock);
+       list_for_each_entry(entry, &memtype_list, nd) {
+@@ -638,13 +626,17 @@
+       unsigned long flags;
+       unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+-      is_ram = pat_pagerange_is_ram(paddr, paddr + size);
++      is_ram = pagerange_is_ram(paddr, paddr + size);
+-      /*
+-       * reserve_pfn_range() doesn't support RAM pages.
+-       */
+-      if (is_ram != 0)
+-              return -EINVAL;
++      if (is_ram != 0) {
++              /*
++               * For mapping RAM pages, drivers need to call
++               * set_memory_[uc|wc|wb] directly, for reserve and free, before
++               * setting up the PTE.
++               */
++              WARN_ON_ONCE(1);
++              return 0;
++      }
+       ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
+       if (ret)
+@@ -701,7 +693,7 @@
+ {
+       int is_ram;
+-      is_ram = pat_pagerange_is_ram(paddr, paddr + size);
++      is_ram = pagerange_is_ram(paddr, paddr + size);
+       if (is_ram == 0)
+               free_memtype(paddr, paddr + size);
+ }
+@@ -869,7 +861,6 @@
+       else
+               return pgprot_noncached(prot);
+ }
+-EXPORT_SYMBOL_GPL(pgprot_writecombine);
+ #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/mm/testmmiotrace.c linux-2.6.29-rc3.owrt/arch/x86/mm/testmmiotrace.c
+--- linux-2.6.29.owrt/arch/x86/mm/testmmiotrace.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/mm/testmmiotrace.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*
+- * Written by Pekka Paalanen, 2008-2009 <pq@iki.fi>
++ * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+  */
+ #include <linux/module.h>
+ #include <linux/io.h>
+@@ -9,74 +9,35 @@
+ static unsigned long mmio_address;
+ module_param(mmio_address, ulong, 0);
+-MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
+-                              "(or 8 MB if read_far is non-zero).");
+-
+-static unsigned long read_far = 0x400100;
+-module_param(read_far, ulong, 0);
+-MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB "
+-                              "(default: 0x400100).");
+-
+-static unsigned v16(unsigned i)
+-{
+-      return i * 12 + 7;
+-}
+-
+-static unsigned v32(unsigned i)
+-{
+-      return i * 212371 + 13;
+-}
++MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+ static void do_write_test(void __iomem *p)
+ {
+       unsigned int i;
+-      pr_info(MODULE_NAME ": write test.\n");
+       mmiotrace_printk("Write test.\n");
+-
+       for (i = 0; i < 256; i++)
+               iowrite8(i, p + i);
+-
+       for (i = 1024; i < (5 * 1024); i += 2)
+-              iowrite16(v16(i), p + i);
+-
++              iowrite16(i * 12 + 7, p + i);
+       for (i = (5 * 1024); i < (16 * 1024); i += 4)
+-              iowrite32(v32(i), p + i);
++              iowrite32(i * 212371 + 13, p + i);
+ }
+ static void do_read_test(void __iomem *p)
+ {
+       unsigned int i;
+-      unsigned errs[3] = { 0 };
+-      pr_info(MODULE_NAME ": read test.\n");
+       mmiotrace_printk("Read test.\n");
+-
+       for (i = 0; i < 256; i++)
+-              if (ioread8(p + i) != i)
+-                      ++errs[0];
+-
++              ioread8(p + i);
+       for (i = 1024; i < (5 * 1024); i += 2)
+-              if (ioread16(p + i) != v16(i))
+-                      ++errs[1];
+-
++              ioread16(p + i);
+       for (i = (5 * 1024); i < (16 * 1024); i += 4)
+-              if (ioread32(p + i) != v32(i))
+-                      ++errs[2];
+-
+-      mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n",
+-                                              errs[0], errs[1], errs[2]);
++              ioread32(p + i);
+ }
+-static void do_read_far_test(void __iomem *p)
++static void do_test(void)
+ {
+-      pr_info(MODULE_NAME ": read far test.\n");
+-      mmiotrace_printk("Read far test.\n");
+-
+-      ioread32(p + read_far);
+-}
+-
+-static void do_test(unsigned long size)
+-{
+-      void __iomem *p = ioremap_nocache(mmio_address, size);
++      void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+       if (!p) {
+               pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
+               return;
+@@ -84,15 +45,11 @@
+       mmiotrace_printk("ioremap returned %p.\n", p);
+       do_write_test(p);
+       do_read_test(p);
+-      if (read_far && read_far < size - 4)
+-              do_read_far_test(p);
+       iounmap(p);
+ }
+ static int __init init(void)
+ {
+-      unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
+-
+       if (mmio_address == 0) {
+               pr_err(MODULE_NAME ": you have to use the module argument "
+                                                       "mmio_address.\n");
+@@ -101,11 +58,10 @@
+               return -ENXIO;
+       }
+-      pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
+-              "address space, and writing 16 kB of rubbish in there.\n",
+-               size >> 10, mmio_address);
+-      do_test(size);
+-      pr_info(MODULE_NAME ": All done.\n");
++      pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
++                                      "in PCI address space, and writing "
++                                      "rubbish in there.\n", mmio_address);
++      do_test();
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/oprofile/op_model_ppro.c linux-2.6.29-rc3.owrt/arch/x86/oprofile/op_model_ppro.c
+--- linux-2.6.29.owrt/arch/x86/oprofile/op_model_ppro.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/oprofile/op_model_ppro.c    2009-05-10 23:48:28.000000000 +0200
+@@ -78,18 +78,8 @@
+       if (cpu_has_arch_perfmon) {
+               union cpuid10_eax eax;
+               eax.full = cpuid_eax(0xa);
+-
+-              /*
+-               * For Core2 (family 6, model 15), don't reset the
+-               * counter width:
+-               */
+-              if (!(eax.split.version_id == 0 &&
+-                      current_cpu_data.x86 == 6 &&
+-                              current_cpu_data.x86_model == 15)) {
+-
+-                      if (counter_width < eax.split.bit_width)
+-                              counter_width = eax.split.bit_width;
+-              }
++              if (counter_width < eax.split.bit_width)
++                      counter_width = eax.split.bit_width;
+       }
+       /* clear all counters */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/pci/irq.c linux-2.6.29-rc3.owrt/arch/x86/pci/irq.c
+--- linux-2.6.29.owrt/arch/x86/pci/irq.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/pci/irq.c   2009-05-10 23:48:28.000000000 +0200
+@@ -572,7 +572,6 @@
+       case PCI_DEVICE_ID_INTEL_ICH7_1:
+       case PCI_DEVICE_ID_INTEL_ICH7_30:
+       case PCI_DEVICE_ID_INTEL_ICH7_31:
+-      case PCI_DEVICE_ID_INTEL_TGP_LPC:
+       case PCI_DEVICE_ID_INTEL_ESB2_0:
+       case PCI_DEVICE_ID_INTEL_ICH8_0:
+       case PCI_DEVICE_ID_INTEL_ICH8_1:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/xen/enlighten.c linux-2.6.29-rc3.owrt/arch/x86/xen/enlighten.c
+--- linux-2.6.29.owrt/arch/x86/xen/enlighten.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/xen/enlighten.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1672,9 +1672,6 @@
+          possible map and a non-dummy shared_info. */
+       per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+-      local_irq_disable();
+-      early_boot_irqs_off();
+-
+       xen_raw_console_write("mapping kernel into physical memory\n");
+       pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/x86/xen/multicalls.h linux-2.6.29-rc3.owrt/arch/x86/xen/multicalls.h
+--- linux-2.6.29.owrt/arch/x86/xen/multicalls.h        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/x86/xen/multicalls.h    2009-05-10 23:48:28.000000000 +0200
+@@ -19,10 +19,8 @@
+    paired with xen_mc_issue() */
+ static inline void xen_mc_batch(void)
+ {
+-      unsigned long flags;
+       /* need to disable interrupts until this entry is complete */
+-      local_irq_save(flags);
+-      __get_cpu_var(xen_mc_irq_flags) = flags;
++      local_irq_save(__get_cpu_var(xen_mc_irq_flags));
+ }
+ static inline struct multicall_space xen_mc_entry(size_t args)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/xtensa/Kconfig linux-2.6.29-rc3.owrt/arch/xtensa/Kconfig
+--- linux-2.6.29.owrt/arch/xtensa/Kconfig      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/xtensa/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -103,6 +103,9 @@
+       help
+       Can we use information of configuration file?
++config HIGHMEM
++      bool "High memory support"
++
+ endmenu
+ menu "Platform options"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/xtensa/kernel/setup.c linux-2.6.29-rc3.owrt/arch/xtensa/kernel/setup.c
+--- linux-2.6.29.owrt/arch/xtensa/kernel/setup.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/xtensa/kernel/setup.c   2009-05-10 23:48:28.000000000 +0200
+@@ -44,8 +44,6 @@
+ #include <asm/setup.h>
+ #include <asm/param.h>
+-#include <platform/hardware.h>
+-
+ #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+ struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/xtensa/kernel/traps.c linux-2.6.29-rc3.owrt/arch/xtensa/kernel/traps.c
+--- linux-2.6.29.owrt/arch/xtensa/kernel/traps.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/xtensa/kernel/traps.c   2009-05-10 23:48:28.000000000 +0200
+@@ -30,7 +30,6 @@
+ #include <linux/stringify.h>
+ #include <linux/kallsyms.h>
+ #include <linux/delay.h>
+-#include <linux/hardirq.h>
+ #include <asm/ptrace.h>
+ #include <asm/timex.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/xtensa/mm/fault.c linux-2.6.29-rc3.owrt/arch/xtensa/mm/fault.c
+--- linux-2.6.29.owrt/arch/xtensa/mm/fault.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/xtensa/mm/fault.c       2009-05-10 23:48:28.000000000 +0200
+@@ -14,7 +14,6 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+-#include <linux/hardirq.h>
+ #include <asm/mmu_context.h>
+ #include <asm/cacheflush.h>
+ #include <asm/hardirq.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/arch/xtensa/platforms/iss/console.c linux-2.6.29-rc3.owrt/arch/xtensa/platforms/iss/console.c
+--- linux-2.6.29.owrt/arch/xtensa/platforms/iss/console.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/arch/xtensa/platforms/iss/console.c  2009-05-10 23:48:28.000000000 +0200
+@@ -140,14 +140,16 @@
+ }
+-static int rs_put_char(struct tty_struct *tty, unsigned char ch)
++static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+ {
+       char buf[2];
++      if (!tty)
++              return;
++
+       buf[0] = ch;
+       buf[1] = '\0';          /* Is this NULL necessary? */
+       __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+-      return 1;
+ }
+ static void rs_flush_chars(struct tty_struct *tty)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-barrier.c linux-2.6.29-rc3.owrt/block/blk-barrier.c
+--- linux-2.6.29.owrt/block/blk-barrier.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-barrier.c  2009-05-10 23:48:28.000000000 +0200
+@@ -302,7 +302,7 @@
+  * Description:
+  *    Issue a flush for the block device in question. Caller can supply
+  *    room for storing the error offset in case of a flush error, if they
+- *    wish to.
++ *    wish to.  Caller must run wait_for_completion() on its own.
+  */
+ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-core.c linux-2.6.29-rc3.owrt/block/blk-core.c
+--- linux-2.6.29.owrt/block/blk-core.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-core.c     2009-05-10 23:48:28.000000000 +0200
+@@ -64,12 +64,11 @@
+ static void drive_stat_acct(struct request *rq, int new_io)
+ {
+-      struct gendisk *disk = rq->rq_disk;
+       struct hd_struct *part;
+       int rw = rq_data_dir(rq);
+       int cpu;
+-      if (!blk_fs_request(rq) || !disk || !blk_do_io_stat(disk->queue))
++      if (!blk_fs_request(rq) || !rq->rq_disk)
+               return;
+       cpu = part_stat_lock();
+@@ -600,7 +599,8 @@
+       q->request_fn           = rfn;
+       q->prep_rq_fn           = NULL;
+       q->unplug_fn            = generic_unplug_device;
+-      q->queue_flags          = QUEUE_FLAG_DEFAULT;
++      q->queue_flags          = (1 << QUEUE_FLAG_CLUSTER |
++                                 1 << QUEUE_FLAG_STACKABLE);
+       q->queue_lock           = lock;
+       blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+@@ -1125,8 +1125,6 @@
+       if (bio_sync(bio))
+               req->cmd_flags |= REQ_RW_SYNC;
+-      if (bio_unplug(bio))
+-              req->cmd_flags |= REQ_UNPLUG;
+       if (bio_rw_meta(bio))
+               req->cmd_flags |= REQ_RW_META;
+@@ -1143,7 +1141,6 @@
+       int el_ret, nr_sectors;
+       const unsigned short prio = bio_prio(bio);
+       const int sync = bio_sync(bio);
+-      const int unplug = bio_unplug(bio);
+       int rw_flags;
+       nr_sectors = bio_sectors(bio);
+@@ -1247,7 +1244,7 @@
+               blk_plug_device(q);
+       add_request(q, req);
+ out:
+-      if (unplug || blk_queue_nonrot(q))
++      if (sync || blk_queue_nonrot(q))
+               __generic_unplug_device(q);
+       spin_unlock_irq(q->queue_lock);
+       return 0;
+@@ -1451,11 +1448,6 @@
+                       err = -EOPNOTSUPP;
+                       goto end_io;
+               }
+-              if (bio_barrier(bio) && bio_has_data(bio) &&
+-                  (q->next_ordered == QUEUE_ORDERED_NONE)) {
+-                      err = -EOPNOTSUPP;
+-                      goto end_io;
+-              }
+               ret = q->make_request_fn(q, bio);
+       } while (ret);
+@@ -1663,55 +1655,6 @@
+ }
+ EXPORT_SYMBOL(blkdev_dequeue_request);
+-static void blk_account_io_completion(struct request *req, unsigned int bytes)
+-{
+-      struct gendisk *disk = req->rq_disk;
+-
+-      if (!disk || !blk_do_io_stat(disk->queue))
+-              return;
+-
+-      if (blk_fs_request(req)) {
+-              const int rw = rq_data_dir(req);
+-              struct hd_struct *part;
+-              int cpu;
+-
+-              cpu = part_stat_lock();
+-              part = disk_map_sector_rcu(req->rq_disk, req->sector);
+-              part_stat_add(cpu, part, sectors[rw], bytes >> 9);
+-              part_stat_unlock();
+-      }
+-}
+-
+-static void blk_account_io_done(struct request *req)
+-{
+-      struct gendisk *disk = req->rq_disk;
+-
+-      if (!disk || !blk_do_io_stat(disk->queue))
+-              return;
+-
+-      /*
+-       * Account IO completion.  bar_rq isn't accounted as a normal
+-       * IO on queueing nor completion.  Accounting the containing
+-       * request is enough.
+-       */
+-      if (blk_fs_request(req) && req != &req->q->bar_rq) {
+-              unsigned long duration = jiffies - req->start_time;
+-              const int rw = rq_data_dir(req);
+-              struct hd_struct *part;
+-              int cpu;
+-
+-              cpu = part_stat_lock();
+-              part = disk_map_sector_rcu(disk, req->sector);
+-
+-              part_stat_inc(cpu, part, ios[rw]);
+-              part_stat_add(cpu, part, ticks[rw], duration);
+-              part_round_stats(cpu, part);
+-              part_dec_in_flight(part);
+-
+-              part_stat_unlock();
+-      }
+-}
+-
+ /**
+  * __end_that_request_first - end I/O on a request
+  * @req:      the request being processed
+@@ -1747,7 +1690,16 @@
+                               (unsigned long long)req->sector);
+       }
+-      blk_account_io_completion(req, nr_bytes);
++      if (blk_fs_request(req) && req->rq_disk) {
++              const int rw = rq_data_dir(req);
++              struct hd_struct *part;
++              int cpu;
++
++              cpu = part_stat_lock();
++              part = disk_map_sector_rcu(req->rq_disk, req->sector);
++              part_stat_add(cpu, part, sectors[rw], nr_bytes >> 9);
++              part_stat_unlock();
++      }
+       total_bytes = bio_nbytes = 0;
+       while ((bio = req->bio) != NULL) {
+@@ -1827,6 +1779,8 @@
+  */
+ static void end_that_request_last(struct request *req, int error)
+ {
++      struct gendisk *disk = req->rq_disk;
++
+       if (blk_rq_tagged(req))
+               blk_queue_end_tag(req->q, req);
+@@ -1838,7 +1792,27 @@
+       blk_delete_timer(req);
+-      blk_account_io_done(req);
++      /*
++       * Account IO completion.  bar_rq isn't accounted as a normal
++       * IO on queueing nor completion.  Accounting the containing
++       * request is enough.
++       */
++      if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
++              unsigned long duration = jiffies - req->start_time;
++              const int rw = rq_data_dir(req);
++              struct hd_struct *part;
++              int cpu;
++
++              cpu = part_stat_lock();
++              part = disk_map_sector_rcu(disk, req->sector);
++
++              part_stat_inc(cpu, part, ios[rw]);
++              part_stat_add(cpu, part, ticks[rw], duration);
++              part_round_stats(cpu, part);
++              part_dec_in_flight(part);
++
++              part_stat_unlock();
++      }
+       if (req->end_io)
+               req->end_io(req, error);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk.h linux-2.6.29-rc3.owrt/block/blk.h
+--- linux-2.6.29.owrt/block/blk.h      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk.h  2009-05-10 23:48:28.000000000 +0200
+@@ -108,12 +108,4 @@
+ #endif
+ }
+-static inline int blk_do_io_stat(struct request_queue *q)
+-{
+-      if (q)
+-              return blk_queue_io_stat(q);
+-
+-      return 0;
+-}
+-
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-integrity.c linux-2.6.29-rc3.owrt/block/blk-integrity.c
+--- linux-2.6.29.owrt/block/blk-integrity.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-integrity.c        2009-05-10 23:48:28.000000000 +0200
+@@ -309,24 +309,24 @@
+ /**
+  * blk_integrity_register - Register a gendisk as being integrity-capable
+  * @disk:     struct gendisk pointer to make integrity-aware
+- * @template: optional integrity profile to register
++ * @template: integrity profile
+  *
+  * Description: When a device needs to advertise itself as being able
+  * to send/receive integrity metadata it must use this function to
+  * register the capability with the block layer.  The template is a
+  * blk_integrity struct with values appropriate for the underlying
+- * hardware.  If template is NULL the new profile is allocated but
+- * not filled out. See Documentation/block/data-integrity.txt.
++ * hardware.  See Documentation/block/data-integrity.txt.
+  */
+ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
+ {
+       struct blk_integrity *bi;
+       BUG_ON(disk == NULL);
++      BUG_ON(template == NULL);
+       if (disk->integrity == NULL) {
+               bi = kmem_cache_alloc(integrity_cachep,
+-                                    GFP_KERNEL | __GFP_ZERO);
++                                              GFP_KERNEL | __GFP_ZERO);
+               if (!bi)
+                       return -1;
+@@ -346,16 +346,13 @@
+               bi = disk->integrity;
+       /* Use the provided profile as template */
+-      if (template != NULL) {
+-              bi->name = template->name;
+-              bi->generate_fn = template->generate_fn;
+-              bi->verify_fn = template->verify_fn;
+-              bi->tuple_size = template->tuple_size;
+-              bi->set_tag_fn = template->set_tag_fn;
+-              bi->get_tag_fn = template->get_tag_fn;
+-              bi->tag_size = template->tag_size;
+-      } else
+-              bi->name = "unsupported";
++      bi->name = template->name;
++      bi->generate_fn = template->generate_fn;
++      bi->verify_fn = template->verify_fn;
++      bi->tuple_size = template->tuple_size;
++      bi->set_tag_fn = template->set_tag_fn;
++      bi->get_tag_fn = template->get_tag_fn;
++      bi->tag_size = template->tag_size;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-merge.c linux-2.6.29-rc3.owrt/block/blk-merge.c
+--- linux-2.6.29.owrt/block/blk-merge.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-merge.c    2009-05-10 23:48:28.000000000 +0200
+@@ -38,77 +38,72 @@
+       }
+ }
+-static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
+-                                           struct bio *bio)
++void blk_recalc_rq_segments(struct request *rq)
+ {
++      int nr_phys_segs;
+       unsigned int phys_size;
+       struct bio_vec *bv, *bvprv = NULL;
+-      int cluster, i, high, highprv = 1;
+-      unsigned int seg_size, nr_phys_segs;
+-      struct bio *fbio, *bbio;
++      int seg_size;
++      int cluster;
++      struct req_iterator iter;
++      int high, highprv = 1;
++      struct request_queue *q = rq->q;
+-      if (!bio)
+-              return 0;
++      if (!rq->bio)
++              return;
+-      fbio = bio;
+       cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+       seg_size = 0;
+       phys_size = nr_phys_segs = 0;
+-      for_each_bio(bio) {
+-              bio_for_each_segment(bv, bio, i) {
+-                      /*
+-                       * the trick here is making sure that a high page is
+-                       * never considered part of another segment, since that
+-                       * might change with the bounce page.
+-                       */
+-                      high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+-                      if (high || highprv)
++      rq_for_each_segment(bv, rq, iter) {
++              /*
++               * the trick here is making sure that a high page is never
++               * considered part of another segment, since that might
++               * change with the bounce page.
++               */
++              high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
++              if (high || highprv)
++                      goto new_segment;
++              if (cluster) {
++                      if (seg_size + bv->bv_len > q->max_segment_size)
++                              goto new_segment;
++                      if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
++                              goto new_segment;
++                      if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+                               goto new_segment;
+-                      if (cluster) {
+-                              if (seg_size + bv->bv_len > q->max_segment_size)
+-                                      goto new_segment;
+-                              if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
+-                                      goto new_segment;
+-                              if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+-                                      goto new_segment;
+-
+-                              seg_size += bv->bv_len;
+-                              bvprv = bv;
+-                              continue;
+-                      }
+-new_segment:
+-                      if (nr_phys_segs == 1 && seg_size >
+-                          fbio->bi_seg_front_size)
+-                              fbio->bi_seg_front_size = seg_size;
+-                      nr_phys_segs++;
++                      seg_size += bv->bv_len;
+                       bvprv = bv;
+-                      seg_size = bv->bv_len;
+-                      highprv = high;
++                      continue;
+               }
+-              bbio = bio;
++new_segment:
++              if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
++                      rq->bio->bi_seg_front_size = seg_size;
++
++              nr_phys_segs++;
++              bvprv = bv;
++              seg_size = bv->bv_len;
++              highprv = high;
+       }
+-      if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+-              fbio->bi_seg_front_size = seg_size;
+-      if (seg_size > bbio->bi_seg_back_size)
+-              bbio->bi_seg_back_size = seg_size;
++      if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
++              rq->bio->bi_seg_front_size = seg_size;
++      if (seg_size > rq->biotail->bi_seg_back_size)
++              rq->biotail->bi_seg_back_size = seg_size;
+-      return nr_phys_segs;
+-}
+-
+-void blk_recalc_rq_segments(struct request *rq)
+-{
+-      rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
++      rq->nr_phys_segments = nr_phys_segs;
+ }
+ void blk_recount_segments(struct request_queue *q, struct bio *bio)
+ {
++      struct request rq;
+       struct bio *nxt = bio->bi_next;
+-
++      rq.q = q;
++      rq.bio = rq.biotail = bio;
+       bio->bi_next = NULL;
+-      bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
++      blk_recalc_rq_segments(&rq);
+       bio->bi_next = nxt;
++      bio->bi_phys_segments = rq.nr_phys_segments;
+       bio->bi_flags |= (1 << BIO_SEG_VALID);
+ }
+ EXPORT_SYMBOL(blk_recount_segments);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-sysfs.c linux-2.6.29-rc3.owrt/block/blk-sysfs.c
+--- linux-2.6.29.owrt/block/blk-sysfs.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-sysfs.c    2009-05-10 23:48:28.000000000 +0200
+@@ -130,27 +130,6 @@
+       return queue_var_show(max_hw_sectors_kb, (page));
+ }
+-static ssize_t queue_nonrot_show(struct request_queue *q, char *page)
+-{
+-      return queue_var_show(!blk_queue_nonrot(q), page);
+-}
+-
+-static ssize_t queue_nonrot_store(struct request_queue *q, const char *page,
+-                                size_t count)
+-{
+-      unsigned long nm;
+-      ssize_t ret = queue_var_store(&nm, page, count);
+-
+-      spin_lock_irq(q->queue_lock);
+-      if (nm)
+-              queue_flag_clear(QUEUE_FLAG_NONROT, q);
+-      else
+-              queue_flag_set(QUEUE_FLAG_NONROT, q);
+-      spin_unlock_irq(q->queue_lock);
+-
+-      return ret;
+-}
+-
+ static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
+ {
+       return queue_var_show(blk_queue_nomerges(q), page);
+@@ -167,8 +146,8 @@
+               queue_flag_set(QUEUE_FLAG_NOMERGES, q);
+       else
+               queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+-      spin_unlock_irq(q->queue_lock);
++      spin_unlock_irq(q->queue_lock);
+       return ret;
+ }
+@@ -197,27 +176,6 @@
+       return ret;
+ }
+-static ssize_t queue_iostats_show(struct request_queue *q, char *page)
+-{
+-      return queue_var_show(blk_queue_io_stat(q), page);
+-}
+-
+-static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
+-                                 size_t count)
+-{
+-      unsigned long stats;
+-      ssize_t ret = queue_var_store(&stats, page, count);
+-
+-      spin_lock_irq(q->queue_lock);
+-      if (stats)
+-              queue_flag_set(QUEUE_FLAG_IO_STAT, q);
+-      else
+-              queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
+-      spin_unlock_irq(q->queue_lock);
+-
+-      return ret;
+-}
+-
+ static struct queue_sysfs_entry queue_requests_entry = {
+       .attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
+       .show = queue_requests_show,
+@@ -252,12 +210,6 @@
+       .show = queue_hw_sector_size_show,
+ };
+-static struct queue_sysfs_entry queue_nonrot_entry = {
+-      .attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
+-      .show = queue_nonrot_show,
+-      .store = queue_nonrot_store,
+-};
+-
+ static struct queue_sysfs_entry queue_nomerges_entry = {
+       .attr = {.name = "nomerges", .mode = S_IRUGO | S_IWUSR },
+       .show = queue_nomerges_show,
+@@ -270,12 +222,6 @@
+       .store = queue_rq_affinity_store,
+ };
+-static struct queue_sysfs_entry queue_iostats_entry = {
+-      .attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR },
+-      .show = queue_iostats_show,
+-      .store = queue_iostats_store,
+-};
+-
+ static struct attribute *default_attrs[] = {
+       &queue_requests_entry.attr,
+       &queue_ra_entry.attr,
+@@ -283,10 +229,8 @@
+       &queue_max_sectors_entry.attr,
+       &queue_iosched_entry.attr,
+       &queue_hw_sector_size_entry.attr,
+-      &queue_nonrot_entry.attr,
+       &queue_nomerges_entry.attr,
+       &queue_rq_affinity_entry.attr,
+-      &queue_iostats_entry.attr,
+       NULL,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blk-timeout.c linux-2.6.29-rc3.owrt/block/blk-timeout.c
+--- linux-2.6.29.owrt/block/blk-timeout.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blk-timeout.c  2009-05-10 23:48:28.000000000 +0200
+@@ -209,19 +209,12 @@
+ {
+       unsigned long flags;
+       struct request *rq, *tmp;
+-      LIST_HEAD(list);
+       spin_lock_irqsave(q->queue_lock, flags);
+       elv_abort_queue(q);
+-      /*
+-       * Splice entries to local list, to avoid deadlocking if entries
+-       * get readded to the timeout list by error handling
+-       */
+-      list_splice_init(&q->timeout_list, &list);
+-
+-      list_for_each_entry_safe(rq, tmp, &list, timeout_list)
++      list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
+               blk_abort_request(rq);
+       spin_unlock_irqrestore(q->queue_lock, flags);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/blktrace.c linux-2.6.29-rc3.owrt/block/blktrace.c
+--- linux-2.6.29.owrt/block/blktrace.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/blktrace.c     2009-05-10 23:48:28.000000000 +0200
+@@ -142,7 +142,7 @@
+       what |= ddir_act[rw & WRITE];
+       what |= MASK_TC_BIT(rw, BARRIER);
+-      what |= MASK_TC_BIT(rw, SYNCIO);
++      what |= MASK_TC_BIT(rw, SYNC);
+       what |= MASK_TC_BIT(rw, AHEAD);
+       what |= MASK_TC_BIT(rw, META);
+       what |= MASK_TC_BIT(rw, DISCARD);
+@@ -187,12 +187,59 @@
+ static struct dentry *blk_tree_root;
+ static DEFINE_MUTEX(blk_tree_mutex);
++static unsigned int root_users;
++
++static inline void blk_remove_root(void)
++{
++      if (blk_tree_root) {
++              debugfs_remove(blk_tree_root);
++              blk_tree_root = NULL;
++      }
++}
++
++static void blk_remove_tree(struct dentry *dir)
++{
++      mutex_lock(&blk_tree_mutex);
++      debugfs_remove(dir);
++      if (--root_users == 0)
++              blk_remove_root();
++      mutex_unlock(&blk_tree_mutex);
++}
++
++static struct dentry *blk_create_tree(const char *blk_name)
++{
++      struct dentry *dir = NULL;
++      int created = 0;
++
++      mutex_lock(&blk_tree_mutex);
++
++      if (!blk_tree_root) {
++              blk_tree_root = debugfs_create_dir("block", NULL);
++              if (!blk_tree_root)
++                      goto err;
++              created = 1;
++      }
++
++      dir = debugfs_create_dir(blk_name, blk_tree_root);
++      if (dir)
++              root_users++;
++      else {
++              /* Delete root only if we created it */
++              if (created)
++                      blk_remove_root();
++      }
++
++err:
++      mutex_unlock(&blk_tree_mutex);
++      return dir;
++}
+ static void blk_trace_cleanup(struct blk_trace *bt)
+ {
++      relay_close(bt->rchan);
+       debugfs_remove(bt->msg_file);
+       debugfs_remove(bt->dropped_file);
+-      relay_close(bt->rchan);
++      blk_remove_tree(bt->dir);
+       free_percpu(bt->sequence);
+       free_percpu(bt->msg_data);
+       kfree(bt);
+@@ -299,18 +346,7 @@
+ static int blk_remove_buf_file_callback(struct dentry *dentry)
+ {
+-      struct dentry *parent = dentry->d_parent;
+       debugfs_remove(dentry);
+-
+-      /*
+-      * this will fail for all but the last file, but that is ok. what we
+-      * care about is the top level buts->name directory going away, when
+-      * the last trace file is gone. Then we don't have to rmdir() that
+-      * manually on trace stop, so it nicely solves the issue with
+-      * force killing of running traces.
+-      */
+-
+-      debugfs_remove(parent);
+       return 0;
+ }
+@@ -368,15 +404,7 @@
+               goto err;
+       ret = -ENOENT;
+-
+-      if (!blk_tree_root) {
+-              blk_tree_root = debugfs_create_dir("block", NULL);
+-              if (!blk_tree_root)
+-                      return -ENOMEM;
+-      }
+-
+-      dir = debugfs_create_dir(buts->name, blk_tree_root);
+-
++      dir = blk_create_tree(buts->name);
+       if (!dir)
+               goto err;
+@@ -430,6 +458,8 @@
+       atomic_dec(&blk_probes_ref);
+       mutex_unlock(&blk_probe_mutex);
+ err:
++      if (dir)
++              blk_remove_tree(dir);
+       if (bt) {
+               if (bt->msg_file)
+                       debugfs_remove(bt->msg_file);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/bsg.c linux-2.6.29-rc3.owrt/block/bsg.c
+--- linux-2.6.29.owrt/block/bsg.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/bsg.c  2009-05-10 23:48:28.000000000 +0200
+@@ -244,8 +244,7 @@
+  * map sg_io_v4 to a request.
+  */
+ static struct request *
+-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
+-          u8 *sense)
++bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm)
+ {
+       struct request_queue *q = bd->queue;
+       struct request *rq, *next_rq = NULL;
+@@ -307,10 +306,6 @@
+               if (ret)
+                       goto out;
+       }
+-
+-      rq->sense = sense;
+-      rq->sense_len = 0;
+-
+       return rq;
+ out:
+       if (rq->cmd != rq->__cmd)
+@@ -353,6 +348,9 @@
+ static void bsg_add_command(struct bsg_device *bd, struct request_queue *q,
+                           struct bsg_command *bc, struct request *rq)
+ {
++      rq->sense = bc->sense;
++      rq->sense_len = 0;
++
+       /*
+        * add bc command to busy queue and submit rq for io
+        */
+@@ -421,7 +419,7 @@
+ {
+       int ret = 0;
+-      dprintk("rq %p bio %p 0x%x\n", rq, bio, rq->errors);
++      dprintk("rq %p bio %p %u\n", rq, bio, rq->errors);
+       /*
+        * fill in all the output members
+        */
+@@ -637,7 +635,7 @@
+               /*
+                * get a request, fill in the blanks, and add to request queue
+                */
+-              rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm, bc->sense);
++              rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
+               if (IS_ERR(rq)) {
+                       ret = PTR_ERR(rq);
+                       rq = NULL;
+@@ -924,12 +922,11 @@
+               struct request *rq;
+               struct bio *bio, *bidi_bio = NULL;
+               struct sg_io_v4 hdr;
+-              u8 sense[SCSI_SENSE_BUFFERSIZE];
+               if (copy_from_user(&hdr, uarg, sizeof(hdr)))
+                       return -EFAULT;
+-              rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE, sense);
++              rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
+               if (IS_ERR(rq))
+                       return PTR_ERR(rq);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/cfq-iosched.c linux-2.6.29-rc3.owrt/block/cfq-iosched.c
+--- linux-2.6.29.owrt/block/cfq-iosched.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/cfq-iosched.c  2009-05-10 23:48:28.000000000 +0200
+@@ -84,11 +84,6 @@
+        */
+       struct cfq_rb_root service_tree;
+       unsigned int busy_queues;
+-      /*
+-       * Used to track any pending rt requests so we can pre-empt current
+-       * non-RT cfqq in service when this value is non-zero.
+-       */
+-      unsigned int busy_rt_queues;
+       int rq_in_driver;
+       int sync_flight;
+@@ -567,8 +562,6 @@
+       BUG_ON(cfq_cfqq_on_rr(cfqq));
+       cfq_mark_cfqq_on_rr(cfqq);
+       cfqd->busy_queues++;
+-      if (cfq_class_rt(cfqq))
+-              cfqd->busy_rt_queues++;
+       cfq_resort_rr_list(cfqd, cfqq);
+ }
+@@ -588,8 +581,6 @@
+       BUG_ON(!cfqd->busy_queues);
+       cfqd->busy_queues--;
+-      if (cfq_class_rt(cfqq))
+-              cfqd->busy_rt_queues--;
+ }
+ /*
+@@ -1014,20 +1005,6 @@
+               goto expire;
+       /*
+-       * If we have a RT cfqq waiting, then we pre-empt the current non-rt
+-       * cfqq.
+-       */
+-      if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) {
+-              /*
+-               * We simulate this as cfqq timed out so that it gets to bank
+-               * the remaining of its time slice.
+-               */
+-              cfq_log_cfqq(cfqd, cfqq, "preempt");
+-              cfq_slice_expired(cfqd, 1);
+-              goto new_queue;
+-      }
+-
+-      /*
+        * The active queue has requests and isn't expired, allow it to
+        * dispatch.
+        */
+@@ -1090,13 +1067,6 @@
+               if (RB_EMPTY_ROOT(&cfqq->sort_list))
+                       break;
+-              /*
+-               * If there is a non-empty RT cfqq waiting for current
+-               * cfqq's timeslice to complete, pre-empt this cfqq
+-               */
+-              if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues)
+-                      break;
+-
+       } while (dispatched < max_dispatch);
+       /*
+@@ -1831,12 +1801,6 @@
+       if (rq_is_meta(rq) && !cfqq->meta_pending)
+               return 1;
+-      /*
+-       * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
+-       */
+-      if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq))
+-              return 1;
+-
+       if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq))
+               return 0;
+@@ -1906,8 +1870,7 @@
+               /*
+                * not the active queue - expire current slice if it is
+                * idle and has expired it's mean thinktime or this new queue
+-               * has some old slice time left and is of higher priority or
+-               * this new queue is RT and the current one is BE
++               * has some old slice time left and is of higher priority
+                */
+               cfq_preempt_queue(cfqd, cfqq);
+               cfq_mark_cfqq_must_dispatch(cfqq);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/block/genhd.c linux-2.6.29-rc3.owrt/block/genhd.c
+--- linux-2.6.29.owrt/block/genhd.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/block/genhd.c        2009-05-10 23:48:28.000000000 +0200
+@@ -256,22 +256,6 @@
+ }
+ #endif /* CONFIG_PROC_FS */
+-/**
+- * register_blkdev - register a new block device
+- *
+- * @major: the requested major device number [1..255]. If @major=0, try to
+- *         allocate any unused major number.
+- * @name: the name of the new block device as a zero terminated string
+- *
+- * The @name must be unique within the system.
+- *
+- * The return value depends on the @major input parameter.
+- *  - if a major device number was requested in range [1..255] then the
+- *    function returns zero on success, or a negative error code
+- *  - if any unused major number was requested with @major=0 parameter
+- *    then the return value is the allocated major number in range
+- *    [1..255] or a negative error code otherwise
+- */
+ int register_blkdev(unsigned int major, const char *name)
+ {
+       struct blk_major_name **n, *p;
+@@ -1103,14 +1087,6 @@
+               if (strcmp(dev_name(dev), name))
+                       continue;
+-              if (partno < disk->minors) {
+-                      /* We need to return the right devno, even
+-                       * if the partition doesn't exist yet.
+-                       */
+-                      devt = MKDEV(MAJOR(dev->devt),
+-                                   MINOR(dev->devt) + partno);
+-                      break;
+-              }
+               part = disk_get_part(disk, partno);
+               if (part) {
+                       devt = part_devt(part);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/CREDITS linux-2.6.29-rc3.owrt/CREDITS
+--- linux-2.6.29.owrt/CREDITS  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/CREDITS      2009-05-10 23:48:28.000000000 +0200
+@@ -2166,6 +2166,7 @@
+ N: Pavel Machek
+ E: pavel@ucw.cz
++E: pavel@suse.cz
+ D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
+ D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
+ D: work on suspend-to-ram/disk, killing duplicates from ioctl32
+@@ -3738,7 +3739,7 @@
+ S: Germany
+ N: Gertjan van Wingerde
+-E: gwingerde@gmail.com
++E: gwingerde@home.nl
+ D: Ralink rt2x00 WLAN driver
+ D: Minix V2 file-system
+ D: Misc fixes
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/ahash.c linux-2.6.29-rc3.owrt/crypto/ahash.c
+--- linux-2.6.29.owrt/crypto/ahash.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/ahash.c       2009-05-10 23:48:28.000000000 +0200
+@@ -214,7 +214,7 @@
+       seq_printf(m, "async        : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ?
+                                            "yes" : "no");
+       seq_printf(m, "blocksize    : %u\n", alg->cra_blocksize);
+-      seq_printf(m, "digestsize   : %u\n", alg->cra_ahash.digestsize);
++      seq_printf(m, "digestsize   : %u\n", alg->cra_hash.digestsize);
+ }
+ const struct crypto_type crypto_ahash_type = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/algapi.c linux-2.6.29-rc3.owrt/crypto/algapi.c
+--- linux-2.6.29.owrt/crypto/algapi.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/algapi.c      2009-05-10 23:48:28.000000000 +0200
+@@ -149,9 +149,6 @@
+               if (q == alg)
+                       goto err;
+-              if (crypto_is_moribund(q))
+-                      continue;
+-
+               if (crypto_is_larval(q)) {
+                       if (!strcmp(alg->cra_driver_name, q->cra_driver_name))
+                               goto err;
+@@ -200,7 +197,7 @@
+       down_write(&crypto_alg_sem);
+       list_for_each_entry(q, &crypto_alg_list, cra_list) {
+-              if (crypto_is_moribund(q) || !crypto_is_larval(q))
++              if (!crypto_is_larval(q))
+                       continue;
+               test = (struct crypto_larval *)q;
+@@ -213,7 +210,6 @@
+       goto unlock;
+ found:
+-      q->cra_flags |= CRYPTO_ALG_DEAD;
+       alg = test->adult;
+       if (err || list_empty(&alg->cra_list))
+               goto complete;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/api.c linux-2.6.29-rc3.owrt/crypto/api.c
+--- linux-2.6.29.owrt/crypto/api.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/api.c 2009-05-10 23:48:28.000000000 +0200
+@@ -215,19 +215,8 @@
+       mask &= ~(CRYPTO_ALG_LARVAL | CRYPTO_ALG_DEAD);
+       type &= mask;
+-      alg = crypto_alg_lookup(name, type, mask);
+-      if (!alg) {
+-              char tmp[CRYPTO_MAX_ALG_NAME];
+-
+-              request_module(name);
+-
+-              if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+-                  snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
+-                      request_module(tmp);
+-
+-              alg = crypto_alg_lookup(name, type, mask);
+-      }
+-
++      alg = try_then_request_module(crypto_alg_lookup(name, type, mask),
++                                    name);
+       if (alg)
+               return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg;
+@@ -568,34 +557,34 @@
+       return ERR_PTR(err);
+ }
+ EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
+-
++ 
+ /*
+- *    crypto_destroy_tfm - Free crypto transform
+- *    @mem: Start of tfm slab
++ *    crypto_free_tfm - Free crypto transform
+  *    @tfm: Transform to free
+  *
+- *    This function frees up the transform and any associated resources,
++ *    crypto_free_tfm() frees up the transform and any associated resources,
+  *    then drops the refcount on the associated algorithm.
+  */
+-void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm)
++void crypto_free_tfm(struct crypto_tfm *tfm)
+ {
+       struct crypto_alg *alg;
+       int size;
+-      if (unlikely(!mem))
++      if (unlikely(!tfm))
+               return;
+       alg = tfm->__crt_alg;
+-      size = ksize(mem);
++      size = sizeof(*tfm) + alg->cra_ctxsize;
+       if (!tfm->exit && alg->cra_exit)
+               alg->cra_exit(tfm);
+       crypto_exit_ops(tfm);
+       crypto_mod_put(alg);
+-      memset(mem, 0, size);
+-      kfree(mem);
++      memset(tfm, 0, size);
++      kfree(tfm);
+ }
+-EXPORT_SYMBOL_GPL(crypto_destroy_tfm);
++
++EXPORT_SYMBOL_GPL(crypto_free_tfm);
+ int crypto_has_alg(const char *name, u32 type, u32 mask)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/lrw.c linux-2.6.29-rc3.owrt/crypto/lrw.c
+--- linux-2.6.29.owrt/crypto/lrw.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/lrw.c 2009-05-10 23:48:28.000000000 +0200
+@@ -45,13 +45,7 @@
+ static inline void setbit128_bbe(void *b, int bit)
+ {
+-      __set_bit(bit ^ (0x80 -
+-#ifdef __BIG_ENDIAN
+-                       BITS_PER_LONG
+-#else
+-                       BITS_PER_BYTE
+-#endif
+-                      ), b);
++      __set_bit(bit ^ 0x78, b);
+ }
+ static int setkey(struct crypto_tfm *parent, const u8 *key,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/scatterwalk.c linux-2.6.29-rc3.owrt/crypto/scatterwalk.c
+--- linux-2.6.29.owrt/crypto/scatterwalk.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/scatterwalk.c 2009-05-10 23:48:28.000000000 +0200
+@@ -54,8 +54,7 @@
+               struct page *page;
+               page = sg_page(walk->sg) + ((walk->offset - 1) >> PAGE_SHIFT);
+-              if (!PageSlab(page))
+-                      flush_dcache_page(page);
++              flush_dcache_page(page);
+       }
+       if (more) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/crypto/shash.c linux-2.6.29-rc3.owrt/crypto/shash.c
+--- linux-2.6.29.owrt/crypto/shash.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/crypto/shash.c       2009-05-10 23:48:28.000000000 +0200
+@@ -388,15 +388,10 @@
+       struct shash_desc *desc = crypto_tfm_ctx(tfm);
+       struct crypto_shash *shash;
+-      if (!crypto_mod_get(calg))
+-              return -EAGAIN;
+-
+       shash = __crypto_shash_cast(crypto_create_tfm(
+               calg, &crypto_shash_type));
+-      if (IS_ERR(shash)) {
+-              crypto_mod_put(calg);
++      if (IS_ERR(shash))
+               return PTR_ERR(shash);
+-      }
+       desc->tfm = shash;
+       tfm->exit = crypto_exit_shash_ops_compat;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/ABI/testing/sysfs-bus-pci linux-2.6.29-rc3.owrt/Documentation/ABI/testing/sysfs-bus-pci
+--- linux-2.6.29.owrt/Documentation/ABI/testing/sysfs-bus-pci  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/ABI/testing/sysfs-bus-pci      2009-05-10 23:48:28.000000000 +0200
+@@ -1,46 +1,3 @@
+-What:         /sys/bus/pci/drivers/.../bind
+-Date:         December 2003
+-Contact:      linux-pci@vger.kernel.org
+-Description:
+-              Writing a device location to this file will cause
+-              the driver to attempt to bind to the device found at
+-              this location.  This is useful for overriding default
+-              bindings.  The format for the location is: DDDD:BB:DD.F.
+-              That is Domain:Bus:Device.Function and is the same as
+-              found in /sys/bus/pci/devices/.  For example:
+-              # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+-              (Note: kernels before 2.6.28 may require echo -n).
+-
+-What:         /sys/bus/pci/drivers/.../unbind
+-Date:         December 2003
+-Contact:      linux-pci@vger.kernel.org
+-Description:
+-              Writing a device location to this file will cause the
+-              driver to attempt to unbind from the device found at
+-              this location.  This may be useful when overriding default
+-              bindings.  The format for the location is: DDDD:BB:DD.F.
+-              That is Domain:Bus:Device.Function and is the same as
+-              found in /sys/bus/pci/devices/. For example:
+-              # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+-              (Note: kernels before 2.6.28 may require echo -n).
+-
+-What:         /sys/bus/pci/drivers/.../new_id
+-Date:         December 2003
+-Contact:      linux-pci@vger.kernel.org
+-Description:
+-              Writing a device ID to this file will attempt to
+-              dynamically add a new device ID to a PCI device driver.
+-              This may allow the driver to support more hardware than
+-              was included in the driver's static device ID support
+-              table at compile time.  The format for the device ID is:
+-              VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+-              Device ID, Subsystem Vendor ID, Subsystem Device ID,
+-              Class, Class Mask, and Private Driver Data.  The Vendor ID
+-              and Device ID fields are required, the rest are optional.
+-              Upon successfully adding an ID, the driver will probe
+-              for the device and attempt to bind to it.  For example:
+-              # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+-
+ What:         /sys/bus/pci/devices/.../vpd
+ Date:         February 2008
+ Contact:      Ben Hutchings <bhutchings@solarflare.com>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/ABI/testing/sysfs-firmware-memmap linux-2.6.29-rc3.owrt/Documentation/ABI/testing/sysfs-firmware-memmap
+--- linux-2.6.29.owrt/Documentation/ABI/testing/sysfs-firmware-memmap  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/ABI/testing/sysfs-firmware-memmap      2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ What:         /sys/firmware/memmap/
+ Date:         June 2008
+-Contact:      Bernhard Walle <bernhard.walle@gmx.de>
++Contact:      Bernhard Walle <bwalle@suse.de>
+ Description:
+               On all platforms, the firmware provides a memory map which the
+               kernel reads. The resources from that memory map are registered
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/block/biodoc.txt linux-2.6.29-rc3.owrt/Documentation/block/biodoc.txt
+--- linux-2.6.29.owrt/Documentation/block/biodoc.txt   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/block/biodoc.txt       2009-05-10 23:48:28.000000000 +0200
+@@ -186,9 +186,8 @@
+ do not have a corresponding kernel virtual address space mapping) and
+ low-memory pages.
+-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+-on PCI high mem DMA aspects and mapping of scatter gather lists, and support
+-for 64 bit PCI.
++Note: Please refer to DMA-mapping.txt for a discussion on PCI high mem DMA
++aspects and mapping of scatter gather lists, and support for 64 bit PCI.
+ Special handling is required only for cases where i/o needs to happen on
+ pages at physical memory addresses beyond what the device can support. In these
+@@ -954,14 +953,14 @@
+                               results in some sort of conflict internally,
+                               this hook allows it to do that.
+-elevator_dispatch_fn*         fills the dispatch queue with ready requests.
++elevator_dispatch_fn          fills the dispatch queue with ready requests.
+                               I/O schedulers are free to postpone requests by
+                               not filling the dispatch queue unless @force
+                               is non-zero.  Once dispatched, I/O schedulers
+                               are not allowed to manipulate the requests -
+                               they belong to generic dispatch queue.
+-elevator_add_req_fn*          called to add a new request into the scheduler
++elevator_add_req_fn           called to add a new request into the scheduler
+ elevator_queue_empty_fn               returns true if the merge queue is empty.
+                               Drivers shouldn't use this, but rather check
+@@ -991,7 +990,7 @@
+ elevator_deactivate_req_fn    Called when device driver decides to delay
+                               a request by requeueing it.
+-elevator_init_fn*
++elevator_init_fn
+ elevator_exit_fn              Allocate and free any elevator specific storage
+                               for a queue.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/block/queue-sysfs.txt linux-2.6.29-rc3.owrt/Documentation/block/queue-sysfs.txt
+--- linux-2.6.29.owrt/Documentation/block/queue-sysfs.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/block/queue-sysfs.txt  1970-01-01 01:00:00.000000000 +0100
+@@ -1,63 +0,0 @@
+-Queue sysfs files
+-=================
+-
+-This text file will detail the queue files that are located in the sysfs tree
+-for each block device. Note that stacked devices typically do not export
+-any settings, since their queue merely functions are a remapping target.
+-These files are the ones found in the /sys/block/xxx/queue/ directory.
+-
+-Files denoted with a RO postfix are readonly and the RW postfix means
+-read-write.
+-
+-hw_sector_size (RO)
+--------------------
+-This is the hardware sector size of the device, in bytes.
+-
+-max_hw_sectors_kb (RO)
+-----------------------
+-This is the maximum number of kilobytes supported in a single data transfer.
+-
+-max_sectors_kb (RW)
+--------------------
+-This is the maximum number of kilobytes that the block layer will allow
+-for a filesystem request. Must be smaller than or equal to the maximum
+-size allowed by the hardware.
+-
+-nomerges (RW)
+--------------
+-This enables the user to disable the lookup logic involved with IO merging
+-requests in the block layer. Merging may still occur through a direct
+-1-hit cache, since that comes for (almost) free. The IO scheduler will not
+-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
+-to 0, enabling all merges.
+-
+-nr_requests (RW)
+-----------------
+-This controls how many requests may be allocated in the block layer for
+-read or write requests. Note that the total allocated number may be twice
+-this amount, since it applies only to reads or writes (not the accumulated
+-sum).
+-
+-read_ahead_kb (RW)
+-------------------
+-Maximum number of kilobytes to read-ahead for filesystems on this block
+-device.
+-
+-rq_affinity (RW)
+-----------------
+-If this option is enabled, the block layer will migrate request completions
+-to the CPU that originally submitted the request. For some workloads
+-this provides a significant reduction in CPU cycles due to caching effects.
+-
+-scheduler (RW)
+---------------
+-When read, this file will display the current and available IO schedulers
+-for this block device. The currently active IO scheduler will be enclosed
+-in [] brackets. Writing an IO scheduler name to this file will switch
+-control of this block device to that new IO scheduler. Note that writing
+-an IO scheduler name to this file will attempt to load that IO scheduler
+-module, if it isn't already present in the system.
+-
+-
+-
+-Jens Axboe <jens.axboe@oracle.com>, February 2009
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/cgroups/cgroups.txt linux-2.6.29-rc3.owrt/Documentation/cgroups/cgroups.txt
+--- linux-2.6.29.owrt/Documentation/cgroups/cgroups.txt        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/cgroups/cgroups.txt    2009-05-10 23:48:28.000000000 +0200
+@@ -252,8 +252,10 @@
+ When a task is moved from one cgroup to another, it gets a new
+ css_set pointer - if there's an already existing css_set with the
+ desired collection of cgroups then that group is reused, else a new
+-css_set is allocated. The appropriate existing css_set is located by
+-looking into a hash table.
++css_set is allocated. Note that the current implementation uses a
++linear search to locate an appropriate existing css_set, so isn't
++very efficient. A future version will use a hash table for better
++performance.
+ To allow access from a cgroup to the css_sets (and hence tasks)
+ that comprise it, a set of cg_cgroup_link objects form a lattice;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/cgroups/cpusets.txt linux-2.6.29-rc3.owrt/Documentation/cgroups/cpusets.txt
+--- linux-2.6.29.owrt/Documentation/cgroups/cpusets.txt        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/cgroups/cpusets.txt    2009-05-10 23:48:28.000000000 +0200
+@@ -142,7 +142,7 @@
+  - in fork and exit, to attach and detach a task from its cpuset.
+  - in sched_setaffinity, to mask the requested CPUs by what's
+    allowed in that tasks cpuset.
+- - in sched.c migrate_live_tasks(), to keep migrating tasks within
++ - in sched.c migrate_all_tasks(), to keep migrating tasks within
+    the CPUs allowed by their cpuset, if possible.
+  - in the mbind and set_mempolicy system calls, to mask the requested
+    Memory Nodes by what's allowed in that tasks cpuset.
+@@ -175,10 +175,6 @@
+  - mem_exclusive flag: is memory placement exclusive?
+  - mem_hardwall flag:  is memory allocation hardwalled
+  - memory_pressure: measure of how much paging pressure in cpuset
+- - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+- - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+- - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+- - sched_relax_domain_level: the searching range when migrating tasks
+ In addition, the root cpuset only has the following file:
+  - memory_pressure_enabled flag: compute memory_pressure?
+@@ -256,7 +252,7 @@
+ This is useful both on tightly managed systems running a wide mix of
+ submitted jobs, which may choose to terminate or re-prioritize jobs that
+-are trying to use more memory than allowed on the nodes assigned to them,
++are trying to use more memory than allowed on the nodes assigned them,
+ and with tightly coupled, long running, massively parallel scientific
+ computing jobs that will dramatically fail to meet required performance
+ goals if they start to use more memory than allowed to them.
+@@ -382,7 +378,7 @@
+ The algorithmic cost of load balancing and its impact on key shared
+ kernel data structures such as the task list increases more than
+ linearly with the number of CPUs being balanced.  So the scheduler
+-has support to partition the systems CPUs into a number of sched
++has support to  partition the systems CPUs into a number of sched
+ domains such that it only load balances within each sched domain.
+ Each sched domain covers some subset of the CPUs in the system;
+ no two sched domains overlap; some CPUs might not be in any sched
+@@ -489,22 +485,17 @@
+ The internal kernel cpuset to scheduler interface passes from the
+ cpuset code to the scheduler code a partition of the load balanced
+ CPUs in the system. This partition is a set of subsets (represented
+-as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+-all the CPUs that must be load balanced.
++as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
++the CPUs that must be load balanced.
+-The cpuset code builds a new such partition and passes it to the
+-scheduler sched domain setup code, to have the sched domains rebuilt
+-as necessary, whenever:
+- - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+- - or CPUs come or go from a cpuset with this flag enabled,
+- - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+-   and with this flag enabled changes,
+- - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+- - or a cpu is offlined/onlined.
++Whenever the 'sched_load_balance' flag changes, or CPUs come or go
++from a cpuset with this flag enabled, or a cpuset with this flag
++enabled is removed, the cpuset code builds a new such partition and
++passes it to the scheduler sched domain setup code, to have the sched
++domains rebuilt as necessary.
+ This partition exactly defines what sched domains the scheduler should
+-setup - one sched domain for each element (struct cpumask) in the
+-partition.
++setup - one sched domain for each element (cpumask_t) in the partition.
+ The scheduler remembers the currently active sched domain partitions.
+ When the scheduler routine partition_sched_domains() is invoked from
+@@ -568,7 +559,7 @@
+ requests 0 and others are -1 then 0 is used.
+ Note that modifying this file will have both good and bad effects,
+-and whether it is acceptable or not depends on your situation.
++and whether it is acceptable or not will be depend on your situation.
+ Don't modify this file if you are not sure.
+ If your situation is:
+@@ -609,15 +600,19 @@
+ If a cpuset has its 'cpus' modified, then each task in that cpuset
+ will have its allowed CPU placement changed immediately.  Similarly,
+-if a tasks pid is written to another cpusets 'tasks' file, then its
+-allowed CPU placement is changed immediately.  If such a task had been
+-bound to some subset of its cpuset using the sched_setaffinity() call,
+-the task will be allowed to run on any CPU allowed in its new cpuset,
+-negating the effect of the prior sched_setaffinity() call.
++if a tasks pid is written to a cpusets 'tasks' file, in either its
++current cpuset or another cpuset, then its allowed CPU placement is
++changed immediately.  If such a task had been bound to some subset
++of its cpuset using the sched_setaffinity() call, the task will be
++allowed to run on any CPU allowed in its new cpuset, negating the
++affect of the prior sched_setaffinity() call.
+ In summary, the memory placement of a task whose cpuset is changed is
+ updated by the kernel, on the next allocation of a page for that task,
+-and the processor placement is updated immediately.
++but the processor placement is not updated, until that tasks pid is
++rewritten to the 'tasks' file of its cpuset.  This is done to avoid
++impacting the scheduler code in the kernel with a check for changes
++in a tasks processor placement.
+ Normally, once a page is allocated (given a physical page
+ of main memory) then that page stays on whatever node it
+@@ -686,14 +681,10 @@
+   # The next line should display '/Charlie'
+   cat /proc/self/cpuset
+-There are ways to query or modify cpusets:
+- - via the cpuset file system directly, using the various cd, mkdir, echo,
+-   cat, rmdir commands from the shell, or their equivalent from C.
+- - via the C library libcpuset.
+- - via the C library libcgroup.
+-   (http://sourceforge.net/proects/libcg/)
+- - via the python application cset.
+-   (http://developer.novell.com/wiki/index.php/Cpuset)
++In the future, a C library interface to cpusets will likely be
++available.  For now, the only way to query or modify cpusets is
++via the cpuset file system, using the various cd, mkdir, echo, cat,
++rmdir commands from the shell, or their equivalent from C.
+ The sched_setaffinity calls can also be done at the shell prompt using
+ SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
+@@ -765,7 +756,7 @@
+ is equivalent to
+-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
++mount -t cgroup -ocpuset X /dev/cpuset
+ echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+ 2.2 Adding/removing cpus
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/cgroups/memcg_test.txt linux-2.6.29-rc3.owrt/Documentation/cgroups/memcg_test.txt
+--- linux-2.6.29.owrt/Documentation/cgroups/memcg_test.txt     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/cgroups/memcg_test.txt 2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ Memory Resource Controller(Memcg)  Implementation Memo.
+-Last Updated: 2009/1/19
+-Base Kernel Version: based on 2.6.29-rc2.
++Last Updated: 2008/12/15
++Base Kernel Version: based on 2.6.28-rc8-mm.
+ Because VM is getting complex (one of reasons is memcg...), memcg's behavior
+ is complex. This is a document for memcg's internal behavior.
+@@ -340,23 +340,3 @@
+       # mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
+       and do task move, mkdir, rmdir etc...under this.
+-
+- 9.7 swapoff.
+-      Besides management of swap is one of complicated parts of memcg,
+-      call path of swap-in at swapoff is not same as usual swap-in path..
+-      It's worth to be tested explicitly.
+-
+-      For example, test like following is good.
+-      (Shell-A)
+-      # mount -t cgroup none /cgroup -t memory
+-      # mkdir /cgroup/test
+-      # echo 40M > /cgroup/test/memory.limit_in_bytes
+-      # echo 0 > /cgroup/test/tasks
+-      Run malloc(100M) program under this. You'll see 60M of swaps.
+-      (Shell-B)
+-      # move all tasks in /cgroup/test to /cgroup
+-      # /sbin/swapoff -a
+-      # rmdir /test/cgroup
+-      # kill malloc task.
+-
+-      Of course, tmpfs v.s. swapoff test should be tested, too.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/Changes linux-2.6.29-rc3.owrt/Documentation/Changes
+--- linux-2.6.29.owrt/Documentation/Changes    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/Changes        2009-05-10 23:48:28.000000000 +0200
+@@ -33,12 +33,10 @@
+ o  binutils               2.12                    # ld -v
+ o  util-linux             2.10o                   # fdformat --version
+ o  module-init-tools      0.9.10                  # depmod -V
+-o  e2fsprogs              1.41.4                  # e2fsck -V
++o  e2fsprogs              1.29                    # tune2fs
+ o  jfsutils               1.1.3                   # fsck.jfs -V
+ o  reiserfsprogs          3.6.3                   # reiserfsck -V 2>&1|grep reiserfsprogs
+ o  xfsprogs               2.6.0                   # xfs_db -V
+-o  squashfs-tools         4.0                     # mksquashfs -version
+-o  btrfs-progs            0.18                    # btrfsck
+ o  pcmciautils            004                     # pccardctl -V
+ o  quota-tools            3.09                    # quota -V
+ o  PPP                    2.4.0                   # pppd --version
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/CodingStyle linux-2.6.29-rc3.owrt/Documentation/CodingStyle
+--- linux-2.6.29.owrt/Documentation/CodingStyle        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/CodingStyle    2009-05-10 23:48:28.000000000 +0200
+@@ -483,25 +483,17 @@
+     (* (max steps 1)
+        c-basic-offset)))
+-(add-hook 'c-mode-common-hook
+-          (lambda ()
+-            ;; Add kernel style
+-            (c-add-style
+-             "linux-tabs-only"
+-             '("linux" (c-offsets-alist
+-                        (arglist-cont-nonempty
+-                         c-lineup-gcc-asm-reg
+-                         c-lineup-arglist-tabs-only))))))
+-
+ (add-hook 'c-mode-hook
+           (lambda ()
+             (let ((filename (buffer-file-name)))
+               ;; Enable kernel mode for the appropriate files
+               (when (and filename
+-                         (string-match (expand-file-name "~/src/linux-trees")
+-                                       filename))
++                         (string-match "~/src/linux-trees" filename))
+                 (setq indent-tabs-mode t)
+-                (c-set-style "linux-tabs-only")))))
++                (c-set-style "linux")
++                (c-set-offset 'arglist-cont-nonempty
++                              '(c-lineup-gcc-asm-reg
++                                c-lineup-arglist-tabs-only))))))
+ This will make emacs go better with the kernel coding style for C
+ files below ~/src/linux-trees.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/connector/cn_test.c linux-2.6.29-rc3.owrt/Documentation/connector/cn_test.c
+--- linux-2.6.29.owrt/Documentation/connector/cn_test.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/connector/cn_test.c    2009-05-10 23:48:28.000000000 +0200
+@@ -137,7 +137,7 @@
+               memcpy(m + 1, data, m->len);
+-              cn_netlink_send(m, 0, GFP_ATOMIC);
++              cn_netlink_send(m, 0, gfp_any());
+               kfree(m);
+       }
+@@ -160,8 +160,10 @@
+               goto err_out;
+       }
+-      setup_timer(&cn_test_timer, cn_test_timer_func, 0);
++      init_timer(&cn_test_timer);
++      cn_test_timer.function = cn_test_timer_func;
+       cn_test_timer.expires = jiffies + HZ;
++      cn_test_timer.data = 0;
+       add_timer(&cn_test_timer);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/cpu-freq/user-guide.txt linux-2.6.29-rc3.owrt/Documentation/cpu-freq/user-guide.txt
+--- linux-2.6.29.owrt/Documentation/cpu-freq/user-guide.txt    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/cpu-freq/user-guide.txt        2009-05-10 23:48:28.000000000 +0200
+@@ -195,3 +195,19 @@
+                               you can change the speed of the CPU,
+                               but only within the limits of
+                               scaling_min_freq and scaling_max_freq.
++                              
++
++3.2 Deprecated Interfaces
++-------------------------
++
++Depending on your kernel configuration, you might find the following 
++cpufreq-related files:
++/proc/cpufreq
++/proc/sys/cpu/*/speed
++/proc/sys/cpu/*/speed-min
++/proc/sys/cpu/*/speed-max
++
++These are files for deprecated interfaces to cpufreq, which offer far
++less functionality. Because of this, these interfaces aren't described
++here.
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/DMA-API.txt linux-2.6.29-rc3.owrt/Documentation/DMA-API.txt
+--- linux-2.6.29.owrt/Documentation/DMA-API.txt        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/DMA-API.txt    2009-05-10 23:48:28.000000000 +0200
+@@ -5,7 +5,7 @@
+ This document describes the DMA API.  For a more gentle introduction
+ phrased in terms of the pci_ equivalents (and actual examples) see
+-Documentation/PCI/PCI-DMA-mapping.txt.
++DMA-mapping.txt
+ This API is split into two pieces.  Part I describes the API and the
+ corresponding pci_ API.  Part II describes the extensions to the API
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/DocBook/device-drivers.tmpl linux-2.6.29-rc3.owrt/Documentation/DocBook/device-drivers.tmpl
+--- linux-2.6.29.owrt/Documentation/DocBook/device-drivers.tmpl        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/DocBook/device-drivers.tmpl    1970-01-01 01:00:00.000000000 +0100
+@@ -1,418 +0,0 @@
+-<?xml version="1.0" encoding="UTF-8"?>
+-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+-      "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+-
+-<book id="LinuxDriversAPI">
+- <bookinfo>
+-  <title>Linux Device Drivers</title>
+-
+-  <legalnotice>
+-   <para>
+-     This documentation is free software; you can redistribute
+-     it and/or modify it under the terms of the GNU General Public
+-     License as published by the Free Software Foundation; either
+-     version 2 of the License, or (at your option) any later
+-     version.
+-   </para>
+-
+-   <para>
+-     This program is distributed in the hope that it will be
+-     useful, but WITHOUT ANY WARRANTY; without even the implied
+-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+-     See the GNU General Public License for more details.
+-   </para>
+-
+-   <para>
+-     You should have received a copy of the GNU General Public
+-     License along with this program; if not, write to the Free
+-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+-     MA 02111-1307 USA
+-   </para>
+-
+-   <para>
+-     For more details see the file COPYING in the source
+-     distribution of Linux.
+-   </para>
+-  </legalnotice>
+- </bookinfo>
+-
+-<toc></toc>
+-
+-  <chapter id="Basics">
+-     <title>Driver Basics</title>
+-     <sect1><title>Driver Entry and Exit points</title>
+-!Iinclude/linux/init.h
+-     </sect1>
+-
+-     <sect1><title>Atomic and pointer manipulation</title>
+-!Iarch/x86/include/asm/atomic_32.h
+-!Iarch/x86/include/asm/unaligned.h
+-     </sect1>
+-
+-     <sect1><title>Delaying, scheduling, and timer routines</title>
+-!Iinclude/linux/sched.h
+-!Ekernel/sched.c
+-!Ekernel/timer.c
+-     </sect1>
+-     <sect1><title>High-resolution timers</title>
+-!Iinclude/linux/ktime.h
+-!Iinclude/linux/hrtimer.h
+-!Ekernel/hrtimer.c
+-     </sect1>
+-     <sect1><title>Workqueues and Kevents</title>
+-!Ekernel/workqueue.c
+-     </sect1>
+-     <sect1><title>Internal Functions</title>
+-!Ikernel/exit.c
+-!Ikernel/signal.c
+-!Iinclude/linux/kthread.h
+-!Ekernel/kthread.c
+-     </sect1>
+-
+-     <sect1><title>Kernel objects manipulation</title>
+-<!--
+-X!Iinclude/linux/kobject.h
+--->
+-!Elib/kobject.c
+-     </sect1>
+-
+-     <sect1><title>Kernel utility functions</title>
+-!Iinclude/linux/kernel.h
+-!Ekernel/printk.c
+-!Ekernel/panic.c
+-!Ekernel/sys.c
+-!Ekernel/rcupdate.c
+-     </sect1>
+-
+-     <sect1><title>Device Resource Management</title>
+-!Edrivers/base/devres.c
+-     </sect1>
+-
+-  </chapter>
+-
+-  <chapter id="devdrivers">
+-     <title>Device drivers infrastructure</title>
+-     <sect1><title>Device Drivers Base</title>
+-<!--
+-X!Iinclude/linux/device.h
+--->
+-!Edrivers/base/driver.c
+-!Edrivers/base/core.c
+-!Edrivers/base/class.c
+-!Edrivers/base/firmware_class.c
+-!Edrivers/base/transport_class.c
+-<!-- Cannot be included, because
+-     attribute_container_add_class_device_adapter
+- and attribute_container_classdev_to_container
+-     exceed allowed 44 characters maximum
+-X!Edrivers/base/attribute_container.c
+--->
+-!Edrivers/base/sys.c
+-<!--
+-X!Edrivers/base/interface.c
+--->
+-!Edrivers/base/platform.c
+-!Edrivers/base/bus.c
+-     </sect1>
+-     <sect1><title>Device Drivers Power Management</title>
+-!Edrivers/base/power/main.c
+-     </sect1>
+-     <sect1><title>Device Drivers ACPI Support</title>
+-<!-- Internal functions only
+-X!Edrivers/acpi/sleep/main.c
+-X!Edrivers/acpi/sleep/wakeup.c
+-X!Edrivers/acpi/motherboard.c
+-X!Edrivers/acpi/bus.c
+--->
+-!Edrivers/acpi/scan.c
+-!Idrivers/acpi/scan.c
+-<!-- No correct structured comments
+-X!Edrivers/acpi/pci_bind.c
+--->
+-     </sect1>
+-     <sect1><title>Device drivers PnP support</title>
+-!Idrivers/pnp/core.c
+-<!-- No correct structured comments
+-X!Edrivers/pnp/system.c
+- -->
+-!Edrivers/pnp/card.c
+-!Idrivers/pnp/driver.c
+-!Edrivers/pnp/manager.c
+-!Edrivers/pnp/support.c
+-     </sect1>
+-     <sect1><title>Userspace IO devices</title>
+-!Edrivers/uio/uio.c
+-!Iinclude/linux/uio_driver.h
+-     </sect1>
+-  </chapter>
+-
+-  <chapter id="parportdev">
+-     <title>Parallel Port Devices</title>
+-!Iinclude/linux/parport.h
+-!Edrivers/parport/ieee1284.c
+-!Edrivers/parport/share.c
+-!Idrivers/parport/daisy.c
+-  </chapter>
+-
+-  <chapter id="message_devices">
+-      <title>Message-based devices</title>
+-     <sect1><title>Fusion message devices</title>
+-!Edrivers/message/fusion/mptbase.c
+-!Idrivers/message/fusion/mptbase.c
+-!Edrivers/message/fusion/mptscsih.c
+-!Idrivers/message/fusion/mptscsih.c
+-!Idrivers/message/fusion/mptctl.c
+-!Idrivers/message/fusion/mptspi.c
+-!Idrivers/message/fusion/mptfc.c
+-!Idrivers/message/fusion/mptlan.c
+-     </sect1>
+-     <sect1><title>I2O message devices</title>
+-!Iinclude/linux/i2o.h
+-!Idrivers/message/i2o/core.h
+-!Edrivers/message/i2o/iop.c
+-!Idrivers/message/i2o/iop.c
+-!Idrivers/message/i2o/config-osm.c
+-!Edrivers/message/i2o/exec-osm.c
+-!Idrivers/message/i2o/exec-osm.c
+-!Idrivers/message/i2o/bus-osm.c
+-!Edrivers/message/i2o/device.c
+-!Idrivers/message/i2o/device.c
+-!Idrivers/message/i2o/driver.c
+-!Idrivers/message/i2o/pci.c
+-!Idrivers/message/i2o/i2o_block.c
+-!Idrivers/message/i2o/i2o_scsi.c
+-!Idrivers/message/i2o/i2o_proc.c
+-     </sect1>
+-  </chapter>
+-
+-  <chapter id="snddev">
+-     <title>Sound Devices</title>
+-!Iinclude/sound/core.h
+-!Esound/sound_core.c
+-!Iinclude/sound/pcm.h
+-!Esound/core/pcm.c
+-!Esound/core/device.c
+-!Esound/core/info.c
+-!Esound/core/rawmidi.c
+-!Esound/core/sound.c
+-!Esound/core/memory.c
+-!Esound/core/pcm_memory.c
+-!Esound/core/init.c
+-!Esound/core/isadma.c
+-!Esound/core/control.c
+-!Esound/core/pcm_lib.c
+-!Esound/core/hwdep.c
+-!Esound/core/pcm_native.c
+-!Esound/core/memalloc.c
+-<!-- FIXME: Removed for now since no structured comments in source
+-X!Isound/sound_firmware.c
+--->
+-  </chapter>
+-
+-  <chapter id="uart16x50">
+-     <title>16x50 UART Driver</title>
+-!Iinclude/linux/serial_core.h
+-!Edrivers/serial/serial_core.c
+-!Edrivers/serial/8250.c
+-  </chapter>
+-
+-  <chapter id="fbdev">
+-     <title>Frame Buffer Library</title>
+-
+-     <para>
+-       The frame buffer drivers depend heavily on four data structures.
+-       These structures are declared in include/linux/fb.h.  They are
+-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+-       The last three can be made available to and from userland.
+-     </para>
+-
+-     <para>
+-       fb_info defines the current state of a particular video card.
+-       Inside fb_info, there exists a fb_ops structure which is a
+-       collection of needed functions to make fbdev and fbcon work.
+-       fb_info is only visible to the kernel.
+-     </para>
+-
+-     <para>
+-       fb_var_screeninfo is used to describe the features of a video card
+-       that are user defined.  With fb_var_screeninfo, things such as
+-       depth and the resolution may be defined.
+-     </para>
+-
+-     <para>
+-       The next structure is fb_fix_screeninfo. This defines the
+-       properties of a card that are created when a mode is set and can't
+-       be changed otherwise.  A good example of this is the start of the
+-       frame buffer memory.  This "locks" the address of the frame buffer
+-       memory, so that it cannot be changed or moved.
+-     </para>
+-
+-     <para>
+-       The last structure is fb_monospecs. In the old API, there was
+-       little importance for fb_monospecs. This allowed for forbidden things
+-       such as setting a mode of 800x600 on a fix frequency monitor. With
+-       the new API, fb_monospecs prevents such things, and if used
+-       correctly, can prevent a monitor from being cooked.  fb_monospecs
+-       will not be useful until kernels 2.5.x.
+-     </para>
+-
+-     <sect1><title>Frame Buffer Memory</title>
+-!Edrivers/video/fbmem.c
+-     </sect1>
+-<!--
+-     <sect1><title>Frame Buffer Console</title>
+-X!Edrivers/video/console/fbcon.c
+-     </sect1>
+--->
+-     <sect1><title>Frame Buffer Colormap</title>
+-!Edrivers/video/fbcmap.c
+-     </sect1>
+-<!-- FIXME:
+-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
+-  out until somebody adds docs.  KAO
+-     <sect1><title>Frame Buffer Generic Functions</title>
+-X!Idrivers/video/fbgen.c
+-     </sect1>
+-KAO -->
+-     <sect1><title>Frame Buffer Video Mode Database</title>
+-!Idrivers/video/modedb.c
+-!Edrivers/video/modedb.c
+-     </sect1>
+-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+-!Edrivers/video/macmodes.c
+-     </sect1>
+-     <sect1><title>Frame Buffer Fonts</title>
+-        <para>
+-           Refer to the file drivers/video/console/fonts.c for more information.
+-        </para>
+-<!-- FIXME: Removed for now since no structured comments in source
+-X!Idrivers/video/console/fonts.c
+--->
+-     </sect1>
+-  </chapter>
+-
+-  <chapter id="input_subsystem">
+-     <title>Input Subsystem</title>
+-!Iinclude/linux/input.h
+-!Edrivers/input/input.c
+-!Edrivers/input/ff-core.c
+-!Edrivers/input/ff-memless.c
+-  </chapter>
+-
+-  <chapter id="spi">
+-      <title>Serial Peripheral Interface (SPI)</title>
+-  <para>
+-      SPI is the "Serial Peripheral Interface", widely used with
+-      embedded systems because it is a simple and efficient
+-      interface:  basically a multiplexed shift register.
+-      Its three signal wires hold a clock (SCK, often in the range
+-      of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+-      a "Master In, Slave Out" (MISO) data line.
+-      SPI is a full duplex protocol; for each bit shifted out the
+-      MOSI line (one per clock) another is shifted in on the MISO line.
+-      Those bits are assembled into words of various sizes on the
+-      way to and from system memory.
+-      An additional chipselect line is usually active-low (nCS);
+-      four signals are normally used for each peripheral, plus
+-      sometimes an interrupt.
+-  </para>
+-  <para>
+-      The SPI bus facilities listed here provide a generalized
+-      interface to declare SPI busses and devices, manage them
+-      according to the standard Linux driver model, and perform
+-      input/output operations.
+-      At this time, only "master" side interfaces are supported,
+-      where Linux talks to SPI peripherals and does not implement
+-      such a peripheral itself.
+-      (Interfaces to support implementing SPI slaves would
+-      necessarily look different.)
+-  </para>
+-  <para>
+-      The programming interface is structured around two kinds of driver,
+-      and two kinds of device.
+-      A "Controller Driver" abstracts the controller hardware, which may
+-      be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+-      connected to dual DMA engines on the other side of the SPI shift
+-      register (maximizing throughput).  Such drivers bridge between
+-      whatever bus they sit on (often the platform bus) and SPI, and
+-      expose the SPI side of their device as a
+-      <structname>struct spi_master</structname>.
+-      SPI devices are children of that master, represented as a
+-      <structname>struct spi_device</structname> and manufactured from
+-      <structname>struct spi_board_info</structname> descriptors which
+-      are usually provided by board-specific initialization code.
+-      A <structname>struct spi_driver</structname> is called a
+-      "Protocol Driver", and is bound to a spi_device using normal
+-      driver model calls.
+-  </para>
+-  <para>
+-      The I/O model is a set of queued messages.  Protocol drivers
+-      submit one or more <structname>struct spi_message</structname>
+-      objects, which are processed and completed asynchronously.
+-      (There are synchronous wrappers, however.)  Messages are
+-      built from one or more <structname>struct spi_transfer</structname>
+-      objects, each of which wraps a full duplex SPI transfer.
+-      A variety of protocol tweaking options are needed, because
+-      different chips adopt very different policies for how they
+-      use the bits transferred with SPI.
+-  </para>
+-!Iinclude/linux/spi/spi.h
+-!Fdrivers/spi/spi.c spi_register_board_info
+-!Edrivers/spi/spi.c
+-  </chapter>
+-
+-  <chapter id="i2c">
+-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+-
+-     <para>
+-      I<superscript>2</superscript>C (or without fancy typography, "I2C")
+-      is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+-      widely used where low data rate communications suffice.
+-      Since it's also a licensed trademark, some vendors use another
+-      name (such as "Two-Wire Interface", TWI) for the same bus.
+-      I2C only needs two signals (SCL for clock, SDA for data), conserving
+-      board real estate and minimizing signal quality issues.
+-      Most I2C devices use seven bit addresses, and bus speeds of up
+-      to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+-      found wide use.
+-      I2C is a multi-master bus; open drain signaling is used to
+-      arbitrate between masters, as well as to handshake and to
+-      synchronize clocks from slower clients.
+-     </para>
+-
+-     <para>
+-      The Linux I2C programming interfaces support only the master
+-      side of bus interactions, not the slave side.
+-      The programming interface is structured around two kinds of driver,
+-      and two kinds of device.
+-      An I2C "Adapter Driver" abstracts the controller hardware; it binds
+-      to a physical device (perhaps a PCI device or platform_device) and
+-      exposes a <structname>struct i2c_adapter</structname> representing
+-      each I2C bus segment it manages.
+-      On each I2C bus segment will be I2C devices represented by a
+-      <structname>struct i2c_client</structname>.  Those devices will
+-      be bound to a <structname>struct i2c_driver</structname>,
+-      which should follow the standard Linux driver model.
+-      (At this writing, a legacy model is more widely used.)
+-      There are functions to perform various I2C protocol operations; at
+-      this writing all such functions are usable only from task context.
+-     </para>
+-
+-     <para>
+-      The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
+-      systems are also I2C conformant.  The electrical constraints are
+-      tighter for SMBus, and it standardizes particular protocol messages
+-      and idioms.  Controllers that support I2C can also support most
+-      SMBus operations, but SMBus controllers don't support all the protocol
+-      options that an I2C controller will.
+-      There are functions to perform various SMBus protocol operations,
+-      either using I2C primitives or by issuing SMBus commands to
+-      i2c_adapter devices which don't support those I2C operations.
+-     </para>
+-
+-!Iinclude/linux/i2c.h
+-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+-!Edrivers/i2c/i2c-core.c
+-  </chapter>
+-
+-</book>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/DocBook/kernel-api.tmpl linux-2.6.29-rc3.owrt/Documentation/DocBook/kernel-api.tmpl
+--- linux-2.6.29.owrt/Documentation/DocBook/kernel-api.tmpl    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/DocBook/kernel-api.tmpl        2009-05-10 23:48:28.000000000 +0200
+@@ -38,6 +38,58 @@
+ <toc></toc>
++  <chapter id="Basics">
++     <title>Driver Basics</title>
++     <sect1><title>Driver Entry and Exit points</title>
++!Iinclude/linux/init.h
++     </sect1>
++
++     <sect1><title>Atomic and pointer manipulation</title>
++!Iarch/x86/include/asm/atomic_32.h
++!Iarch/x86/include/asm/unaligned.h
++     </sect1>
++
++     <sect1><title>Delaying, scheduling, and timer routines</title>
++!Iinclude/linux/sched.h
++!Ekernel/sched.c
++!Ekernel/timer.c
++     </sect1>
++     <sect1><title>High-resolution timers</title>
++!Iinclude/linux/ktime.h
++!Iinclude/linux/hrtimer.h
++!Ekernel/hrtimer.c
++     </sect1>
++     <sect1><title>Workqueues and Kevents</title>
++!Ekernel/workqueue.c
++     </sect1>
++     <sect1><title>Internal Functions</title>
++!Ikernel/exit.c
++!Ikernel/signal.c
++!Iinclude/linux/kthread.h
++!Ekernel/kthread.c
++     </sect1>
++
++     <sect1><title>Kernel objects manipulation</title>
++<!--
++X!Iinclude/linux/kobject.h
++-->
++!Elib/kobject.c
++     </sect1>
++
++     <sect1><title>Kernel utility functions</title>
++!Iinclude/linux/kernel.h
++!Ekernel/printk.c
++!Ekernel/panic.c
++!Ekernel/sys.c
++!Ekernel/rcupdate.c
++     </sect1>
++
++     <sect1><title>Device Resource Management</title>
++!Edrivers/base/devres.c
++     </sect1>
++
++  </chapter>
++
+   <chapter id="adt">
+      <title>Data Types</title>
+      <sect1><title>Doubly Linked Lists</title>
+@@ -246,6 +298,62 @@
+ !Ikernel/acct.c
+   </chapter>
++  <chapter id="devdrivers">
++     <title>Device drivers infrastructure</title>
++     <sect1><title>Device Drivers Base</title>
++<!--
++X!Iinclude/linux/device.h
++-->
++!Edrivers/base/driver.c
++!Edrivers/base/core.c
++!Edrivers/base/class.c
++!Edrivers/base/firmware_class.c
++!Edrivers/base/transport_class.c
++<!-- Cannot be included, because
++     attribute_container_add_class_device_adapter
++ and attribute_container_classdev_to_container
++     exceed allowed 44 characters maximum
++X!Edrivers/base/attribute_container.c
++-->
++!Edrivers/base/sys.c
++<!--
++X!Edrivers/base/interface.c
++-->
++!Edrivers/base/platform.c
++!Edrivers/base/bus.c
++     </sect1>
++     <sect1><title>Device Drivers Power Management</title>
++!Edrivers/base/power/main.c
++     </sect1>
++     <sect1><title>Device Drivers ACPI Support</title>
++<!-- Internal functions only
++X!Edrivers/acpi/sleep/main.c
++X!Edrivers/acpi/sleep/wakeup.c
++X!Edrivers/acpi/motherboard.c
++X!Edrivers/acpi/bus.c
++-->
++!Edrivers/acpi/scan.c
++!Idrivers/acpi/scan.c
++<!-- No correct structured comments
++X!Edrivers/acpi/pci_bind.c
++-->
++     </sect1>
++     <sect1><title>Device drivers PnP support</title>
++!Idrivers/pnp/core.c
++<!-- No correct structured comments
++X!Edrivers/pnp/system.c
++ -->
++!Edrivers/pnp/card.c
++!Idrivers/pnp/driver.c
++!Edrivers/pnp/manager.c
++!Edrivers/pnp/support.c
++     </sect1>
++     <sect1><title>Userspace IO devices</title>
++!Edrivers/uio/uio.c
++!Iinclude/linux/uio_driver.h
++     </sect1>
++  </chapter>
++
+   <chapter id="blkdev">
+      <title>Block Devices</title>
+ !Eblock/blk-core.c
+@@ -273,6 +381,275 @@
+ !Edrivers/char/misc.c
+   </chapter>
++  <chapter id="parportdev">
++     <title>Parallel Port Devices</title>
++!Iinclude/linux/parport.h
++!Edrivers/parport/ieee1284.c
++!Edrivers/parport/share.c
++!Idrivers/parport/daisy.c
++  </chapter>
++
++  <chapter id="message_devices">
++      <title>Message-based devices</title>
++     <sect1><title>Fusion message devices</title>
++!Edrivers/message/fusion/mptbase.c
++!Idrivers/message/fusion/mptbase.c
++!Edrivers/message/fusion/mptscsih.c
++!Idrivers/message/fusion/mptscsih.c
++!Idrivers/message/fusion/mptctl.c
++!Idrivers/message/fusion/mptspi.c
++!Idrivers/message/fusion/mptfc.c
++!Idrivers/message/fusion/mptlan.c
++     </sect1>
++     <sect1><title>I2O message devices</title>
++!Iinclude/linux/i2o.h
++!Idrivers/message/i2o/core.h
++!Edrivers/message/i2o/iop.c
++!Idrivers/message/i2o/iop.c
++!Idrivers/message/i2o/config-osm.c
++!Edrivers/message/i2o/exec-osm.c
++!Idrivers/message/i2o/exec-osm.c
++!Idrivers/message/i2o/bus-osm.c
++!Edrivers/message/i2o/device.c
++!Idrivers/message/i2o/device.c
++!Idrivers/message/i2o/driver.c
++!Idrivers/message/i2o/pci.c
++!Idrivers/message/i2o/i2o_block.c
++!Idrivers/message/i2o/i2o_scsi.c
++!Idrivers/message/i2o/i2o_proc.c
++     </sect1>
++  </chapter>
++
++  <chapter id="snddev">
++     <title>Sound Devices</title>
++!Iinclude/sound/core.h
++!Esound/sound_core.c
++!Iinclude/sound/pcm.h
++!Esound/core/pcm.c
++!Esound/core/device.c
++!Esound/core/info.c
++!Esound/core/rawmidi.c
++!Esound/core/sound.c
++!Esound/core/memory.c
++!Esound/core/pcm_memory.c
++!Esound/core/init.c
++!Esound/core/isadma.c
++!Esound/core/control.c
++!Esound/core/pcm_lib.c
++!Esound/core/hwdep.c
++!Esound/core/pcm_native.c
++!Esound/core/memalloc.c
++<!-- FIXME: Removed for now since no structured comments in source
++X!Isound/sound_firmware.c
++-->
++  </chapter>
++
++  <chapter id="uart16x50">
++     <title>16x50 UART Driver</title>
++!Iinclude/linux/serial_core.h
++!Edrivers/serial/serial_core.c
++!Edrivers/serial/8250.c
++  </chapter>
++
++  <chapter id="fbdev">
++     <title>Frame Buffer Library</title>
++
++     <para>
++       The frame buffer drivers depend heavily on four data structures.  
++       These structures are declared in include/linux/fb.h.  They are 
++       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. 
++       The last three can be made available to and from userland. 
++     </para>
++
++     <para>
++       fb_info defines the current state of a particular video card. 
++       Inside fb_info, there exists a fb_ops structure which is a 
++       collection of needed functions to make fbdev and fbcon work.
++       fb_info is only visible to the kernel.
++     </para>
++
++     <para>
++       fb_var_screeninfo is used to describe the features of a video card 
++       that are user defined.  With fb_var_screeninfo, things such as
++       depth and the resolution may be defined.
++     </para>
++
++     <para>
++       The next structure is fb_fix_screeninfo. This defines the 
++       properties of a card that are created when a mode is set and can't 
++       be changed otherwise.  A good example of this is the start of the 
++       frame buffer memory.  This "locks" the address of the frame buffer
++       memory, so that it cannot be changed or moved.
++     </para>
++
++     <para>
++       The last structure is fb_monospecs. In the old API, there was 
++       little importance for fb_monospecs. This allowed for forbidden things 
++       such as setting a mode of 800x600 on a fix frequency monitor. With 
++       the new API, fb_monospecs prevents such things, and if used 
++       correctly, can prevent a monitor from being cooked.  fb_monospecs
++       will not be useful until kernels 2.5.x.
++     </para>
++
++     <sect1><title>Frame Buffer Memory</title>
++!Edrivers/video/fbmem.c
++     </sect1>
++<!--
++     <sect1><title>Frame Buffer Console</title>
++X!Edrivers/video/console/fbcon.c
++     </sect1>
++-->
++     <sect1><title>Frame Buffer Colormap</title>
++!Edrivers/video/fbcmap.c
++     </sect1>
++<!-- FIXME:
++  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
++  out until somebody adds docs.  KAO
++     <sect1><title>Frame Buffer Generic Functions</title>
++X!Idrivers/video/fbgen.c
++     </sect1>
++KAO -->
++     <sect1><title>Frame Buffer Video Mode Database</title>
++!Idrivers/video/modedb.c
++!Edrivers/video/modedb.c
++     </sect1>
++     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
++!Edrivers/video/macmodes.c
++     </sect1>
++     <sect1><title>Frame Buffer Fonts</title>
++        <para>
++           Refer to the file drivers/video/console/fonts.c for more information.
++        </para>
++<!-- FIXME: Removed for now since no structured comments in source
++X!Idrivers/video/console/fonts.c
++-->
++     </sect1>
++  </chapter>
++
++  <chapter id="input_subsystem">
++     <title>Input Subsystem</title>
++!Iinclude/linux/input.h
++!Edrivers/input/input.c
++!Edrivers/input/ff-core.c
++!Edrivers/input/ff-memless.c
++  </chapter>
++
++  <chapter id="spi">
++      <title>Serial Peripheral Interface (SPI)</title>
++  <para>
++      SPI is the "Serial Peripheral Interface", widely used with
++      embedded systems because it is a simple and efficient
++      interface:  basically a multiplexed shift register.
++      Its three signal wires hold a clock (SCK, often in the range
++      of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
++      a "Master In, Slave Out" (MISO) data line.
++      SPI is a full duplex protocol; for each bit shifted out the
++      MOSI line (one per clock) another is shifted in on the MISO line.
++      Those bits are assembled into words of various sizes on the
++      way to and from system memory.
++      An additional chipselect line is usually active-low (nCS);
++      four signals are normally used for each peripheral, plus
++      sometimes an interrupt.
++  </para>
++  <para>
++      The SPI bus facilities listed here provide a generalized
++      interface to declare SPI busses and devices, manage them
++      according to the standard Linux driver model, and perform
++      input/output operations.
++      At this time, only "master" side interfaces are supported,
++      where Linux talks to SPI peripherals and does not implement
++      such a peripheral itself.
++      (Interfaces to support implementing SPI slaves would
++      necessarily look different.)
++  </para>
++  <para>
++      The programming interface is structured around two kinds of driver,
++      and two kinds of device.
++      A "Controller Driver" abstracts the controller hardware, which may
++      be as simple as a set of GPIO pins or as complex as a pair of FIFOs
++      connected to dual DMA engines on the other side of the SPI shift
++      register (maximizing throughput).  Such drivers bridge between
++      whatever bus they sit on (often the platform bus) and SPI, and
++      expose the SPI side of their device as a
++      <structname>struct spi_master</structname>.
++      SPI devices are children of that master, represented as a
++      <structname>struct spi_device</structname> and manufactured from
++      <structname>struct spi_board_info</structname> descriptors which
++      are usually provided by board-specific initialization code.
++      A <structname>struct spi_driver</structname> is called a
++      "Protocol Driver", and is bound to a spi_device using normal
++      driver model calls.
++  </para>
++  <para>
++      The I/O model is a set of queued messages.  Protocol drivers
++      submit one or more <structname>struct spi_message</structname>
++      objects, which are processed and completed asynchronously.
++      (There are synchronous wrappers, however.)  Messages are
++      built from one or more <structname>struct spi_transfer</structname>
++      objects, each of which wraps a full duplex SPI transfer.
++      A variety of protocol tweaking options are needed, because
++      different chips adopt very different policies for how they
++      use the bits transferred with SPI.
++  </para>
++!Iinclude/linux/spi/spi.h
++!Fdrivers/spi/spi.c spi_register_board_info
++!Edrivers/spi/spi.c
++  </chapter>
++
++  <chapter id="i2c">
++     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
++
++     <para>
++      I<superscript>2</superscript>C (or without fancy typography, "I2C")
++      is an acronym for the "Inter-IC" bus, a simple bus protocol which is
++      widely used where low data rate communications suffice.
++      Since it's also a licensed trademark, some vendors use another
++      name (such as "Two-Wire Interface", TWI) for the same bus.
++      I2C only needs two signals (SCL for clock, SDA for data), conserving
++      board real estate and minimizing signal quality issues.
++      Most I2C devices use seven bit addresses, and bus speeds of up
++      to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
++      found wide use.
++      I2C is a multi-master bus; open drain signaling is used to
++      arbitrate between masters, as well as to handshake and to
++      synchronize clocks from slower clients.
++     </para>
++
++     <para>
++      The Linux I2C programming interfaces support only the master
++      side of bus interactions, not the slave side.
++      The programming interface is structured around two kinds of driver,
++      and two kinds of device.
++      An I2C "Adapter Driver" abstracts the controller hardware; it binds
++      to a physical device (perhaps a PCI device or platform_device) and
++      exposes a <structname>struct i2c_adapter</structname> representing
++      each I2C bus segment it manages.
++      On each I2C bus segment will be I2C devices represented by a
++      <structname>struct i2c_client</structname>.  Those devices will
++      be bound to a <structname>struct i2c_driver</structname>,
++      which should follow the standard Linux driver model.
++      (At this writing, a legacy model is more widely used.)
++      There are functions to perform various I2C protocol operations; at
++      this writing all such functions are usable only from task context.
++     </para>
++
++     <para>
++      The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
++      systems are also I2C conformant.  The electrical constraints are
++      tighter for SMBus, and it standardizes particular protocol messages
++      and idioms.  Controllers that support I2C can also support most
++      SMBus operations, but SMBus controllers don't support all the protocol
++      options that an I2C controller will.
++      There are functions to perform various SMBus protocol operations,
++      either using I2C primitives or by issuing SMBus commands to
++      i2c_adapter devices which don't support those I2C operations.
++     </para>
++
++!Iinclude/linux/i2c.h
++!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
++!Edrivers/i2c/i2c-core.c
++  </chapter>
++
+   <chapter id="clk">
+      <title>Clock Framework</title>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/DocBook/Makefile linux-2.6.29-rc3.owrt/Documentation/DocBook/Makefile
+--- linux-2.6.29.owrt/Documentation/DocBook/Makefile   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/DocBook/Makefile       2009-05-10 23:48:28.000000000 +0200
+@@ -6,7 +6,7 @@
+ # To add a new book the only step required is to add the book to the
+ # list of DOCBOOKS.
+-DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
++DOCBOOKS := z8530book.xml mcabook.xml \
+           kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
+           procfs-guide.xml writing_usb_driver.xml networking.xml \
+           kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/DocBook/uio-howto.tmpl linux-2.6.29-rc3.owrt/Documentation/DocBook/uio-howto.tmpl
+--- linux-2.6.29.owrt/Documentation/DocBook/uio-howto.tmpl     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/DocBook/uio-howto.tmpl 2009-05-10 23:48:28.000000000 +0200
+@@ -42,12 +42,6 @@
+ <revhistory>
+       <revision>
+-      <revnumber>0.7</revnumber>
+-      <date>2008-12-23</date>
+-      <authorinitials>hjk</authorinitials>
+-      <revremark>Added generic platform drivers and offset attribute.</revremark>
+-      </revision>
+-      <revision>
+       <revnumber>0.6</revnumber>
+       <date>2008-12-05</date>
+       <authorinitials>hjk</authorinitials>
+@@ -318,16 +312,6 @@
+       pointed to by addr.
+       </para>
+ </listitem>
+-<listitem>
+-      <para>
+-      <filename>offset</filename>: The offset, in bytes, that has to be
+-      added to the pointer returned by <function>mmap()</function> to get
+-      to the actual device memory. This is important if the device's memory
+-      is not page aligned. Remember that pointers returned by
+-      <function>mmap()</function> are always page aligned, so it is good
+-      style to always add this offset.
+-      </para>
+-</listitem>
+ </itemizedlist>
+ <para>
+@@ -610,78 +594,6 @@
+       </para>
+ </sect1>
+-<sect1 id="using_uio_pdrv">
+-<title>Using uio_pdrv for platform devices</title>
+-      <para>
+-      In many cases, UIO drivers for platform devices can be handled in a
+-      generic way. In the same place where you define your
+-      <varname>struct platform_device</varname>, you simply also implement
+-      your interrupt handler and fill your
+-      <varname>struct uio_info</varname>. A pointer to this
+-      <varname>struct uio_info</varname> is then used as
+-      <varname>platform_data</varname> for your platform device.
+-      </para>
+-      <para>
+-      You also need to set up an array of <varname>struct resource</varname>
+-      containing addresses and sizes of your memory mappings. This
+-      information is passed to the driver using the
+-      <varname>.resource</varname> and <varname>.num_resources</varname>
+-      elements of <varname>struct platform_device</varname>.
+-      </para>
+-      <para>
+-      You now have to set the <varname>.name</varname> element of
+-      <varname>struct platform_device</varname> to
+-      <varname>"uio_pdrv"</varname> to use the generic UIO platform device
+-      driver. This driver will fill the <varname>mem[]</varname> array
+-      according to the resources given, and register the device.
+-      </para>
+-      <para>
+-      The advantage of this approach is that you only have to edit a file
+-      you need to edit anyway. You do not have to create an extra driver.
+-      </para>
+-</sect1>
+-
+-<sect1 id="using_uio_pdrv_genirq">
+-<title>Using uio_pdrv_genirq for platform devices</title>
+-      <para>
+-      Especially in embedded devices, you frequently find chips where the
+-      irq pin is tied to its own dedicated interrupt line. In such cases,
+-      where you can be really sure the interrupt is not shared, we can take
+-      the concept of <varname>uio_pdrv</varname> one step further and use a
+-      generic interrupt handler. That's what
+-      <varname>uio_pdrv_genirq</varname> does.
+-      </para>
+-      <para>
+-      The setup for this driver is the same as described above for
+-      <varname>uio_pdrv</varname>, except that you do not implement an
+-      interrupt handler. The <varname>.handler</varname> element of
+-      <varname>struct uio_info</varname> must remain
+-      <varname>NULL</varname>. The  <varname>.irq_flags</varname> element
+-      must not contain <varname>IRQF_SHARED</varname>.
+-      </para>
+-      <para>
+-      You will set the <varname>.name</varname> element of
+-      <varname>struct platform_device</varname> to
+-      <varname>"uio_pdrv_genirq"</varname> to use this driver.
+-      </para>
+-      <para>
+-      The generic interrupt handler of <varname>uio_pdrv_genirq</varname>
+-      will simply disable the interrupt line using
+-      <function>disable_irq_nosync()</function>. After doing its work,
+-      userspace can reenable the interrupt by writing 0x00000001 to the UIO
+-      device file. The driver already implements an
+-      <function>irq_control()</function> to make this possible, you must not
+-      implement your own.
+-      </para>
+-      <para>
+-      Using <varname>uio_pdrv_genirq</varname> not only saves a few lines of
+-      interrupt handler code. You also do not need to know anything about
+-      the chip's internal registers to create the kernel part of the driver.
+-      All you need to know is the irq number of the pin the chip is
+-      connected to.
+-      </para>
+-</sect1>
+-
+ </chapter>
+ <chapter id="userspace_driver" xreflabel="Writing a driver in user space">
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/driver-model/device.txt linux-2.6.29-rc3.owrt/Documentation/driver-model/device.txt
+--- linux-2.6.29.owrt/Documentation/driver-model/device.txt    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/driver-model/device.txt        2009-05-10 23:48:28.000000000 +0200
+@@ -127,11 +127,9 @@
+ Attributes
+ ~~~~~~~~~~
+ struct device_attribute {
+-      struct attribute        attr;
+-      ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+-                      char *buf);
+-      ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+-                       const char *buf, size_t count);
++        struct attribute        attr;
++        ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
++        ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+ };
+ Attributes of devices can be exported via drivers using a simple
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/dvb/README.flexcop linux-2.6.29-rc3.owrt/Documentation/dvb/README.flexcop
+--- linux-2.6.29.owrt/Documentation/dvb/README.flexcop 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/Documentation/dvb/README.flexcop     2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,205 @@
++This README escorted the skystar2-driver rewriting procedure. It describes the
++state of the new flexcop-driver set and some internals are written down here
++too.
++
++This document hopefully describes things about the flexcop and its
++device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
++drivers based on the skystar2.c and other information.
++
++Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
++touched and rewritten.
++
++History & News
++==============
++  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
++
++
++
++
++General coding processing
++=========================
++
++We should proceed as follows (as long as no one complains):
++
++0) Think before start writing code!
++
++1) rewriting the skystar2.c with the help of the flexcop register descriptions
++and splitting up the files to a pci-bus-part and a flexcop-part.
++The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
++device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
++
++2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
++and other pci drivers)
++
++3) make some beautification (see 'Improvements when rewriting (refactoring) is
++done')
++
++4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
++a wider tester audience.
++
++5) creating an usb-bus-part using the already written flexcop code for the pci
++card.
++
++Idea: create a kernel-object for the flexcop and export all important
++functions. This option saves kernel-memory, but maybe a lot of functions have
++to be exported to kernel namespace.
++
++
++Current situation
++=================
++
++0) Done :)
++1) Done (some minor issues left)
++2) Done
++3) Not ready yet, more information is necessary
++4) next to be done (see the table below)
++5) USB driver is working (yes, there are some minor issues)
++
++What seems to be ready?
++-----------------------
++
++1) Rewriting
++1a) i2c is cut off from the flexcop-pci.c and seems to work
++1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
++1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
++1e) eeprom (reading MAC address)
++1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
++1f) misc. register accesses for reading parameters (e.g. resetting, revision)
++1g) pid/mac filter (flexcop-hw-filter.c)
++1i) dvb-stuff initialization in flexcop.c (done)
++1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
++1j) remove flexcop initialization from flexcop-pci.c completely (done)
++1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
++1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
++non-static where possible, moved code to proper places)
++
++2) Search for errors in the leftover of flexcop-pci.c (partially done)
++5a) add MAC address reading
++5c) feeding of ISOC data to the software demux (format of the isochronous data
++and speed optimization, no real error) (thanks to Vadim Catana)
++
++What to do in the near future?
++--------------------------------------
++(no special order here)
++
++5) USB driver
++5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
++
++Testing changes
++---------------
++
++O             = item is working
++P             = item is partially working
++X             = item is not working
++N             = item does not apply here
++<empty field> = item need to be examined
++
++       | PCI                               | USB
++item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
++-------+-------+---------+---------+-------+-------+---------+---------+-------
++1a)    | O     |         |         |       | N     | N       | N       | N
++1b)    | O     |         |         |       |       |         | O       |
++1c)    | N     | N       |         |       | N     | N       | O       |
++1d)    |                 O                 |                 O
++1e)    |                 O                 |                 O
++1f)    |                                   P
++1g)    |                                   O
++1h)    |                 P                 |
++1i)    |                 O                 |                 N
++1j)    |                 O                 |                 N
++1l)    |                 O                 |                 N
++2)     |                 O                 |                 N
++5a)    |                 N                 |                 O
++5b)*   |                 N                 |
++5c)    |                 N                 |                 O
++
++* - not done yet
++
++Known bugs and problems and TODO
++--------------------------------
++
++1g/h/l) when pid filtering is enabled on the pci card
++
++DMA usage currently:
++  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
++  address and triggers an IRQ when it's full and starts writing to the second
++  address. When the second address is full, the IRQ is triggered again, and
++  the flexcop writes to first address again, and so on.
++  The buffersize of each address is currently 640*188 bytes.
++
++  Problem is, when using hw-pid-filtering and doing some low-bandwidth
++  operation (like scanning) the buffers won't be filled enough to trigger
++  the IRQ. That's why:
++
++  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
++  is triggered.  Is the current write address of DMA1 different to the one
++  during the last IRQ, then the data is passed to the demuxer.
++
++  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
++  implemented correctly yet.
++
++  The solution is to disable HW PID filtering, but I don't know how the DVB
++  API software demux behaves on slow systems with 45MBit/s TS.
++
++Solved bugs :)
++--------------
++1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
++working)
++SOLUTION: also index 0 was affected, because net_translation is done for
++these indexes by default
++
++5b) isochronous transfer does only work in the first attempt (for the Sky2PC
++USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
++woke up again (don't know if this need fixes, see
++flexcop-fe-tuner.c:flexcop_sleep)
++
++NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
++anything in the while the driver is loaded the first time), no transfers take
++place anymore.
++
++Improvements when rewriting (refactoring) is done
++=================================================
++
++- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
++  (enable sleeping for other demods than dvb-s)
++- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
++
++Debugging
++---------
++- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
++  with this flexcop, this is important, because i2c is now using the
++  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
++  that, please tell us so).
++
++Everything which is identical in the following table, can be put into a common
++flexcop-module.
++
++                PCI                  USB
++-------------------------------------------------------------------------------
++Different:
++Register access:  accessing IO memory  USB control message
++I2C bus:          I2C bus of the FC    USB control message
++Data transfer:    DMA                  isochronous transfer
++EEPROM transfer:  through i2c bus      not clear yet
++
++Identical:
++Streaming:                 accessing registers
++PID Filtering:             accessing registers
++Sram destinations:         accessing registers
++Tuner/Demod:                     I2C bus
++DVB-stuff:            can be written for common use
++
++Acknowledgements (just for the rewriting part)
++================
++
++Bjarne Steinsbo thought a lot in the first place of the pci part for this code
++sharing idea.
++
++Andreas Oberritter for providing a recent PCI initialization template
++(pluto2.c).
++
++Boleslaw Ciesielski for pointing out a problem with firmware loader.
++
++Vadim Catana for correcting the USB transfer.
++
++comments, critics and ideas to linux-dvb@linuxtv.org.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/dvb/technisat.txt linux-2.6.29-rc3.owrt/Documentation/dvb/technisat.txt
+--- linux-2.6.29.owrt/Documentation/dvb/technisat.txt  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/dvb/technisat.txt      2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+-How to set up the Technisat/B2C2 Flexcop devices
+-================================================
++How to set up the Technisat devices
++===================================
+ 1) Find out what device you have
+ ================================
+@@ -16,60 +16,54 @@
+ If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
+ "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
+-In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
++In this directory uncheck every driver which is activated there.
+ Then please activate:
+ 2a) Main module part:
+ a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
+-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+-OR
++b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+ c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
+ d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
+ Notice: d.) is helpful for troubleshooting
+ 2b) Frontend module part:
+-1.) SkyStar DVB-S Revision 2.3:
++1.) Revision 2.3:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
+-2.) SkyStar DVB-S Revision 2.6:
++2.) Revision 2.6:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
+-3.) SkyStar DVB-S Revision 2.7:
++3.) Revision 2.7:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
+ c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
+ d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
+-4.) SkyStar DVB-S Revision 2.8:
++4.) Revision 2.8:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
+ c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
+ d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
+-5.) AirStar DVB-T card:
++5.) DVB-T card:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
+-6.) CableStar DVB-C card:
++6.) DVB-C card:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
+-7.) AirStar ATSC card 1st generation:
++7.) ATSC card 1st generation:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
+-8.) AirStar ATSC card 2nd generation:
++8.) ATSC card 2nd generation:
+ a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+ b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
+-c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
++c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+-9.) AirStar ATSC card 3rd generation:
+-a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+-b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+-c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+-
+-Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
++Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/feature-removal-schedule.txt linux-2.6.29-rc3.owrt/Documentation/feature-removal-schedule.txt
+--- linux-2.6.29.owrt/Documentation/feature-removal-schedule.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/feature-removal-schedule.txt   2009-05-10 23:48:28.000000000 +0200
+@@ -335,12 +335,3 @@
+       Secmark, it is time to deprecate the older mechanism and start the
+       process of removing the old code.
+ Who:  Paul Moore <paul.moore@hp.com>
+----------------------------
+-
+-What: sysfs ui for changing p4-clockmod parameters
+-When: September 2009
+-Why:  See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+-      e088e4c9cdb618675874becb91b2fd581ee707e6.
+-      Removal is subject to fixing any remaining bugs in ACPI which may
+-      cause the thermal throttling not to happen at the right time.
+-Who:  Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/ext2.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/ext2.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/ext2.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/ext2.txt   2009-05-10 23:48:28.000000000 +0200
+@@ -373,11 +373,10 @@
+ Compression (*)               http://e2compr.sourceforge.net/
+ Implementations for:
+-Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs
+-Windows 95 (*)                http://www.yipton.net/content.html#FSDEXT2
++Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
++Windows 95 (*)                http://www.yipton.demon.co.uk/content.html#FSDEXT2
+ DOS client (*)                ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+-OS/2 (+)              ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+-RISC OS client                http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
++OS/2                  http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
++RISC OS client                ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+ (*) no longer actively developed/supported (as of Apr 2001)
+-(+) no longer actively developed/supported (as of Mar 2009)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/ext3.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/ext3.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/ext3.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/ext3.txt   2009-05-10 23:48:28.000000000 +0200
+@@ -198,5 +198,5 @@
+ programs:     http://e2fsprogs.sourceforge.net/
+               http://ext2resize.sourceforge.net
+-useful links: http://www.ibm.com/developerworks/library/l-fs7.html
+-              http://www.ibm.com/developerworks/library/l-fs8.html
++useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/
++              http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/proc.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/proc.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/proc.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/proc.txt   2009-05-10 23:48:28.000000000 +0200
+@@ -1478,13 +1478,6 @@
+ this should be enabled, but if the problem persists the messages can be
+ disabled.
+-netdev_budget
+--------------
+-
+-Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+-poll). In one polling cycle interfaces which are registered to polling are
+-probed in a round-robin manner. The limit of packets in one such probe can be
+-set per-device via sysfs class/net/<device>/weight .
+ netdev_max_backlog
+ ------------------
+@@ -2034,34 +2027,6 @@
+ values are in the range -16 to +15, plus the special value -17, which disables
+ oom-killing altogether for this process.
+-The process to be killed in an out-of-memory situation is selected among all others
+-based on its badness score. This value equals the original memory size of the process
+-and is then updated according to its CPU time (utime + stime) and the
+-run time (uptime - start time). The longer it runs the smaller is the score.
+-Badness score is divided by the square root of the CPU time and then by
+-the double square root of the run time.
+-
+-Swapped out tasks are killed first. Half of each child's memory size is added to
+-the parent's score if they do not share the same memory. Thus forking servers
+-are the prime candidates to be killed. Having only one 'hungry' child will make
+-parent less preferable than the child.
+-
+-/proc/<pid>/oom_score shows process' current badness score.
+-
+-The following heuristics are then applied:
+- * if the task was reniced, its score doubles
+- * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
+-      or CAP_SYS_RAWIO) have their score divided by 4
+- * if oom condition happened in one cpuset and checked task does not belong
+-      to it, its score is divided by 8
+- * the resulting score is multiplied by two to the power of oom_adj, i.e.
+-      points <<= oom_adj when it is positive and
+-      points >>= -(oom_adj) otherwise
+-
+-The task with the highest badness score is then selected and its children
+-are killed, process itself will be killed in an OOM situation when it does
+-not have children or some of them disabled oom like described above.
+-
+ 2.13 /proc/<pid>/oom_score - Display current oom-killer score
+ -------------------------------------------------------------
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/squashfs.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/squashfs.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/squashfs.txt   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/squashfs.txt       2009-05-10 23:48:28.000000000 +0200
+@@ -22,7 +22,7 @@
+                               Squashfs                Cramfs
+-Max filesystem size:          2^64                    256 MiB
++Max filesystem size:          2^64                    16 MiB
+ Max file size:                        ~ 2 TiB                 16 MiB
+ Max files:                    unlimited               unlimited
+ Max directories:              unlimited               unlimited
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/sysfs-pci.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/sysfs-pci.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/sysfs-pci.txt  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/sysfs-pci.txt      2009-05-10 23:48:28.000000000 +0200
+@@ -9,7 +9,6 @@
+      |   |-- class
+      |   |-- config
+      |   |-- device
+-     |   |-- enable
+      |   |-- irq
+      |   |-- local_cpus
+      |   |-- resource
+@@ -33,7 +32,6 @@
+        class             PCI class (ascii, ro)
+        config            PCI config space (binary, rw)
+        device            PCI device (ascii, ro)
+-       enable            Whether the device is enabled (ascii, rw)
+        irq               IRQ number (ascii, ro)
+        local_cpus        nearby CPU mask (cpumask, ro)
+        resource                  PCI resource host addresses (ascii, ro)
+@@ -59,19 +57,10 @@
+ don't support mmapping of certain resources, so be sure to check the return
+ value from any attempted mmap.
+-The 'enable' file provides a counter that indicates how many times the device 
+-has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+-echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+-the count.  Even when it returns to 0, though, some of the initialisation
+-may not be reversed.  
+-
+ The 'rom' file is special in that it provides read-only access to the device's
+ ROM file, if available.  It's disabled by default, however, so applications
+ should write the string "1" to the file to enable it before attempting a read
+-call, and disable it following the access by writing "0" to the file.  Note
+-that the device must be enabled for a rom read to return data succesfully.
+-In the event a driver is not bound to the device, it can be enabled using the
+-'enable' file, documented above.
++call, and disable it following the access by writing "0" to the file.
+ Accessing legacy resources through sysfs
+ ----------------------------------------
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/sysfs.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/sysfs.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/sysfs.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/sysfs.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -2,10 +2,8 @@
+ sysfs - _The_ filesystem for exporting kernel objects. 
+ Patrick Mochel        <mochel@osdl.org>
+-Mike Murphy <mamurph@cs.clemson.edu>
+-Revised:    22 February 2009
+-Original:   10 January 2003
++10 January 2003
+ What it is:
+@@ -66,13 +64,12 @@
+ struct attribute {
+         char                    * name;
+-        struct module         *owner;
+         mode_t                  mode;
+ };
+-int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+-void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
++int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
++void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+ A bare attribute contains no means to read or write the value of the
+@@ -83,11 +80,9 @@
+ For example, the driver model defines struct device_attribute like:
+ struct device_attribute {
+-      struct attribute        attr;
+-      ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+-                      char *buf);
+-      ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+-                       const char *buf, size_t count);
++        struct attribute        attr;
++        ssize_t (*show)(struct device * dev, char * buf);
++        ssize_t (*store)(struct device * dev, const char * buf);
+ };
+ int device_create_file(struct device *, struct device_attribute *);
+@@ -95,8 +90,12 @@
+ It also defines this helper for defining device attributes: 
+-#define DEVICE_ATTR(_name, _mode, _show, _store) \
+-struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
++#define DEVICE_ATTR(_name, _mode, _show, _store)      \
++struct device_attribute dev_attr_##_name = {            \
++        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
++        .show   = _show,                                \
++        .store  = _store,                               \
++};
+ For example, declaring
+@@ -108,9 +107,9 @@
+        .attr  = {
+               .name = "foo",
+               .mode = S_IWUSR | S_IRUGO,
+-              .show = show_foo,
+-              .store = store_foo,
+       },
++      .show = show_foo,
++      .store = store_foo,
+ };
+@@ -162,12 +161,10 @@
+ specified when declaring the attribute. The method types should be as
+ simple as those defined for device attributes:
+-ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+-                char * buf);
+-ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+-                 const char * buf);
++        ssize_t (*show)(struct device * dev, char * buf);
++        ssize_t (*store)(struct device * dev, const char * buf);
+-IOW, they should take only an object, an attribute, and a buffer as parameters.
++IOW, they should take only an object and a buffer as parameters. 
+ sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
+@@ -302,16 +299,14 @@
+ Structure:
+ struct device_attribute {
+-      struct attribute        attr;
+-      ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+-                      char *buf);
+-      ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+-                       const char *buf, size_t count);
++        struct attribute        attr;
++        ssize_t (*show)(struct device * dev, char * buf);
++        ssize_t (*store)(struct device * dev, const char * buf);
+ };
+ Declaring:
+-DEVICE_ATTR(_name, _mode, _show, _store);
++DEVICE_ATTR(_name, _str, _mode, _show, _store);
+ Creation/Removal:
+@@ -347,8 +342,7 @@
+ struct driver_attribute {
+         struct attribute        attr;
+         ssize_t (*show)(struct device_driver *, char * buf);
+-        ssize_t (*store)(struct device_driver *, const char * buf,
+-                         size_t count);
++        ssize_t (*store)(struct device_driver *, const char * buf);
+ };
+ Declaring:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/filesystems/ubifs.txt linux-2.6.29-rc3.owrt/Documentation/filesystems/ubifs.txt
+--- linux-2.6.29.owrt/Documentation/filesystems/ubifs.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/filesystems/ubifs.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -79,6 +79,13 @@
+ (*) == default.
++norm_unmount (*)      commit on unmount; the journal is committed
++                      when the file-system is unmounted so that the
++                      next mount does not have to replay the journal
++                      and it becomes very fast;
++fast_unmount          do not commit on unmount; this option makes
++                      unmount faster, but the next mount slower
++                      because of the need to replay the journal.
+ bulk_read             read more in one go to take advantage of flash
+                       media that read faster sequentially
+ no_bulk_read (*)      do not bulk-read
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/hwmon/hpfall.c linux-2.6.29-rc3.owrt/Documentation/hwmon/hpfall.c
+--- linux-2.6.29.owrt/Documentation/hwmon/hpfall.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/hwmon/hpfall.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,101 +0,0 @@
+-/* Disk protection for HP machines.
+- *
+- * Copyright 2008 Eric Piel
+- * Copyright 2009 Pavel Machek <pavel@suse.cz>
+- *
+- * GPLv2.
+- */
+-
+-#include <stdio.h>
+-#include <stdlib.h>
+-#include <unistd.h>
+-#include <fcntl.h>
+-#include <sys/stat.h>
+-#include <sys/types.h>
+-#include <string.h>
+-#include <stdint.h>
+-#include <errno.h>
+-#include <signal.h>
+-
+-void write_int(char *path, int i)
+-{
+-      char buf[1024];
+-      int fd = open(path, O_RDWR);
+-      if (fd < 0) {
+-              perror("open");
+-              exit(1);
+-      }
+-      sprintf(buf, "%d", i);
+-      if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+-              perror("write");
+-              exit(1);
+-      }
+-      close(fd);
+-}
+-
+-void set_led(int on)
+-{
+-      write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+-}
+-
+-void protect(int seconds)
+-{
+-      write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+-}
+-
+-int on_ac(void)
+-{
+-//    /sys/class/power_supply/AC0/online
+-}
+-
+-int lid_open(void)
+-{
+-//    /proc/acpi/button/lid/LID/state
+-}
+-
+-void ignore_me(void)
+-{
+-      protect(0);
+-      set_led(0);
+-
+-}
+-
+-int main(int argc, char* argv[])
+-{
+-       int fd, ret;
+-
+-       fd = open("/dev/freefall", O_RDONLY);
+-       if (fd < 0) {
+-               perror("open");
+-               return EXIT_FAILURE;
+-       }
+-
+-      signal(SIGALRM, ignore_me);
+-
+-       for (;;) {
+-             unsigned char count;
+-
+-               ret = read(fd, &count, sizeof(count));
+-             alarm(0);
+-             if ((ret == -1) && (errno == EINTR)) {
+-                     /* Alarm expired, time to unpark the heads */
+-                     continue;
+-             }
+-
+-               if (ret != sizeof(count)) {
+-                       perror("read");
+-                       break;
+-               }
+-
+-             protect(21);
+-             set_led(1);
+-             if (1 || on_ac() || lid_open()) {
+-                     alarm(2);
+-             } else {
+-                     alarm(20);
+-             }
+-       }
+-
+-       close(fd);
+-       return EXIT_SUCCESS;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/hwmon/lis3lv02d linux-2.6.29-rc3.owrt/Documentation/hwmon/lis3lv02d
+--- linux-2.6.29.owrt/Documentation/hwmon/lis3lv02d    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/hwmon/lis3lv02d        2009-05-10 23:48:28.000000000 +0200
+@@ -33,14 +33,6 @@
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+-Another feature of the driver is misc device called "freefall" that
+-acts similar to /dev/rtc and reacts on free-fall interrupts received
+-from the device. It supports blocking operations, poll/select and
+-fasync operation modes. You must read 1 bytes from the device.  The
+-result is number of free-fall interrupts since the last successful
+-read (or 255 if number of interrupts would not fit).
+-
+-
+ Axes orientation
+ ----------------
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/hwmon/lm90 linux-2.6.29-rc3.owrt/Documentation/hwmon/lm90
+--- linux-2.6.29.owrt/Documentation/hwmon/lm90 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/hwmon/lm90     2009-05-10 23:48:28.000000000 +0200
+@@ -42,11 +42,6 @@
+     Addresses scanned: I2C 0x4e
+     Datasheet: Publicly available at the Maxim website
+                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+-  * Maxim MAX6648
+-    Prefix: 'max6646'
+-    Addresses scanned: I2C 0x4c
+-    Datasheet: Publicly available at the Maxim website
+-               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+   * Maxim MAX6649
+     Prefix: 'max6646'
+     Addresses scanned: I2C 0x4c
+@@ -79,11 +74,6 @@
+                            0x4c, 0x4d and 0x4e
+     Datasheet: Publicly available at the Maxim website
+                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+-  * Maxim MAX6692
+-    Prefix: 'max6646'
+-    Addresses scanned: I2C 0x4c
+-    Datasheet: Publicly available at the Maxim website
+-               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+ Author: Jean Delvare <khali@linux-fr.org>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/IO-mapping.txt linux-2.6.29-rc3.owrt/Documentation/IO-mapping.txt
+--- linux-2.6.29.owrt/Documentation/IO-mapping.txt     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/IO-mapping.txt 2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been
+-      superseded by the functionality provided by the PCI DMA interface
+-      (see Documentation/PCI/PCI-DMA-mapping.txt).  They continue
++      superseded by the functionality provided by the PCI DMA
++      interface (see Documentation/DMA-mapping.txt).  They continue
+       to be documented below for historical purposes, but new code
+       must not use them. --davidm 00/12/12 ]
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/ja_JP/stable_kernel_rules.txt linux-2.6.29-rc3.owrt/Documentation/ja_JP/stable_kernel_rules.txt
+--- linux-2.6.29.owrt/Documentation/ja_JP/stable_kernel_rules.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/ja_JP/stable_kernel_rules.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -12,11 +12,11 @@
+ ==================================
+ これは、
+-linux-2.6.29/Documentation/stable_kernel_rules.txt
++linux-2.6.24/Documentation/stable_kernel_rules.txt
+ の和訳です。
+ 翻訳団体: JF プロジェクト < http://www.linux.or.jp/JF/ >
+-翻訳日: 2009/1/14
++翻訳日: 2007/12/30
+ 翻訳者: Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
+ 校正者: 武井伸光さん、<takei at webmasters dot gr dot jp>
+          かねこさん (Seiji Kaneko) <skaneko at a2 dot mbn dot or dot jp>
+@@ -38,15 +38,12 @@
+  - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー
+    タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という
+    ようなものを修正しなければならない。短く言えば、重大な問題。
+- - 新しい device ID とクオークも受け入れられる。
+  - どのように競合状態が発生するかの説明も一緒に書かれていない限り、
+    "理論的には競合状態になる"ようなものは不可。
+  - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー
+    ンアップなど)
++ - 対応するサブシステムメンテナが受け入れたものでなければならない。
+  - Documentation/SubmittingPatches の規則に従ったものでなければならない。
+- - パッチ自体か同等の修正が Linus のツリーに既に存在しなければならない。
+-  Linus のツリーでのコミットID を -stable へのパッチ投稿の際に引用す
+-   ること。
+ -stable ツリーにパッチを送付する手続き-
+@@ -55,10 +52,8 @@
+  - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合
+    には NAK を受け取る。この反応は開発者たちのスケジュールによって、数
+    日かかる場合がある。
+- - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの
+-   メンテナーによるレビューのために -stable キューに追加される。
+- - パッチに stable@kernel.org のアドレスが付加されているときには、それ
+-   が Linus のツリーに入る時に自動的に stable チームに email される。
++ - もし受け取られたら、パッチは他の開発者たちのレビューのために
++   -stable キューに追加される。
+  - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ
+    きではなく、代わりに security@kernel.org のアドレスに送られる。
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/kernel-doc-nano-HOWTO.txt linux-2.6.29-rc3.owrt/Documentation/kernel-doc-nano-HOWTO.txt
+--- linux-2.6.29.owrt/Documentation/kernel-doc-nano-HOWTO.txt  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/kernel-doc-nano-HOWTO.txt      2009-05-10 23:48:28.000000000 +0200
+@@ -43,8 +43,7 @@
+ and any comment so marked must be in kernel-doc format.  Do not use
+ "/**" to be begin a comment block unless the comment block contains
+ kernel-doc formatted comments.  The closing comment marker for
+-kernel-doc comments can be either "*/" or "**/", but "*/" is
+-preferred in the Linux kernel tree.
++kernel-doc comments can be either "*/" or "**/".
+ Kernel-doc comments should be placed just before the function
+ or data structure being described.
+@@ -64,7 +63,7 @@
+  * comment lines.
+  *
+  * The longer description can have multiple paragraphs.
+- */
++ **/
+ The first line, with the short description, must be on a single line.
+@@ -86,7 +85,7 @@
+  *            perhaps with more lines and words.
+  *
+  * Longer description of this structure.
+- */
++ **/
+ The kernel-doc function comments describe each parameter to the
+ function, in order, with the @name lines.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/kernel-parameters.txt linux-2.6.29-rc3.owrt/Documentation/kernel-parameters.txt
+--- linux-2.6.29.owrt/Documentation/kernel-parameters.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/kernel-parameters.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -114,7 +114,7 @@
+ Parameters denoted with BOOT are actually interpreted by the boot
+ loader, and have no meaning to the kernel directly.
+ Do not modify the syntax of boot loader parameters without extreme
+-need or coordination with <Documentation/x86/boot.txt>.
++need or coordination with <Documentation/x86/i386/boot.txt>.
+ There are also arch-specific kernel-parameters not documented here.
+ See for example <Documentation/x86/x86_64/boot-options.txt>.
+@@ -134,7 +134,7 @@
+       acpi=           [HW,ACPI,X86-64,i386]
+                       Advanced Configuration and Power Interface
+-                      Format: { force | off | ht | strict | noirq | rsdt }
++                      Format: { force | off | ht | strict | noirq }
+                       force -- enable ACPI if default was off
+                       off -- disable ACPI if default was on
+                       noirq -- do not use ACPI for IRQ routing
+@@ -868,10 +868,8 @@
+       icn=            [HW,ISDN]
+                       Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
+-      ide-core.nodma= [HW] (E)IDE subsystem
+-                      Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+-                      .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+-                      .chs .ignore_cable are additional options
++      ide=            [HW] (E)IDE subsystem
++                      Format: ide=nodma or ide=doubler
+                       See Documentation/ide/ide.txt.
+       idebus=         [HW] (E)IDE subsystem - VLB/PCI bus speed
+@@ -939,8 +937,6 @@
+       intel_iommu=    [DMAR] Intel IOMMU driver (DMAR) option
+-              on
+-                      Enable intel iommu driver.
+               off
+                       Disable intel iommu driver.
+               igfx_off [Default Off]
+@@ -2451,7 +2447,7 @@
+                       See Documentation/fb/modedb.txt.
+       vga=            [BOOT,X86-32] Select a particular video mode
+-                      See Documentation/x86/boot.txt and
++                      See Documentation/x86/i386/boot.txt and
+                       Documentation/svga.txt.
+                       Use vga=ask for menu.
+                       This is actually a boot loader parameter; the value is
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/lguest/Makefile linux-2.6.29-rc3.owrt/Documentation/lguest/Makefile
+--- linux-2.6.29.owrt/Documentation/lguest/Makefile    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/lguest/Makefile        2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ # This creates the demonstration utility "lguest" which runs a Linux guest.
+-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
++CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include
+ LDLIBS:=-lz
+ all: lguest
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/logo.svg linux-2.6.29-rc3.owrt/Documentation/logo.svg
+--- linux-2.6.29.owrt/Documentation/logo.svg   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/logo.svg       1970-01-01 01:00:00.000000000 +0100
+@@ -1,2911 +0,0 @@
+-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+-<!-- Created with Inkscape (http://www.inkscape.org/) -->
+-<svg
+-   xmlns:dc="http://purl.org/dc/elements/1.1/"
+-   xmlns:cc="http://creativecommons.org/ns#"
+-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+-   xmlns:svg="http://www.w3.org/2000/svg"
+-   xmlns="http://www.w3.org/2000/svg"
+-   xmlns:xlink="http://www.w3.org/1999/xlink"
+-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+-   width="1771.6534"
+-   height="1417.3228"
+-   id="svg2"
+-   sodipodi:version="0.32"
+-   inkscape:version="0.46"
+-   sodipodi:docname="tuz.svg"
+-   inkscape:output_extension="org.inkscape.output.svg.inkscape"
+-   version="1.0"
+-   style="display:inline;enable-background:new"
+-   inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
+-   inkscape:export-xdpi="100.03588"
+-   inkscape:export-ydpi="100.03588">
+-  <sodipodi:namedview
+-     id="base"
+-     pagecolor="#ffffff"
+-     bordercolor="#666666"
+-     borderopacity="1.0"
+-     gridtolerance="10000"
+-     guidetolerance="10"
+-     objecttolerance="10"
+-     inkscape:pageopacity="0.0"
+-     inkscape:pageshadow="2"
+-     inkscape:zoom="0.25"
+-     inkscape:cx="-174.7931"
+-     inkscape:cy="784.26325"
+-     inkscape:document-units="px"
+-     inkscape:current-layer="svg2"
+-     showgrid="false"
+-     inkscape:window-width="1280"
+-     inkscape:window-height="823"
+-     inkscape:window-x="-4"
+-     inkscape:window-y="25"
+-     showguides="true"
+-     inkscape:guide-bbox="true"
+-     units="mm" />
+-  <defs
+-     id="defs4">
+-    <filter
+-       inkscape:collect="always"
+-       x="-0.084654994"
+-       width="1.16931"
+-       y="-0.36592469"
+-       height="1.7318494"
+-       id="filter11361">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="4.5740586"
+-         id="feGaussianBlur11363" />
+-    </filter>
+-    <inkscape:perspective
+-       sodipodi:type="inkscape:persp3d"
+-       inkscape:vp_x="0 : 564.0976 : 1"
+-       inkscape:vp_y="0 : 1000 : 0"
+-       inkscape:vp_z="1445.8591 : 564.0976 : 1"
+-       inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
+-       id="perspective8145" />
+-    <linearGradient
+-       id="linearGradient7622">
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:1;"
+-         offset="0"
+-         id="stop7624" />
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:0;"
+-         offset="1"
+-         id="stop7626" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4113">
+-      <stop
+-         style="stop-color:#000000;stop-opacity:0;"
+-         offset="0"
+-         id="stop4115" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop4117" />
+-    </linearGradient>
+-    <linearGradient
+-       inkscape:collect="always"
+-       id="linearGradient3660">
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:1;"
+-         offset="0"
+-         id="stop3662" />
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:0;"
+-         offset="1"
+-         id="stop3664" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3627">
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:1;"
+-         offset="0"
+-         id="stop3629" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop3631" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient2843">
+-      <stop
+-         id="stop2845"
+-         offset="0"
+-         style="stop-color:#000000;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="0.02188784"
+-         id="stop2847" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="0.75866222"
+-         id="stop2849" />
+-      <stop
+-         id="stop2851"
+-         offset="0.88508981"
+-         style="stop-color:#232323;stop-opacity:1;" />
+-      <stop
+-         id="stop2853"
+-         offset="1"
+-         style="stop-color:#595959;stop-opacity:1;" />
+-    </linearGradient>
+-    <linearGradient
+-       inkscape:collect="always"
+-       id="linearGradient8964">
+-      <stop
+-         style="stop-color:#1a1a1a;stop-opacity:1;"
+-         offset="0"
+-         id="stop8966" />
+-      <stop
+-         style="stop-color:#1a1a1a;stop-opacity:0;"
+-         offset="1"
+-         id="stop8968" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient8952">
+-      <stop
+-         style="stop-color:#0a0c0c;stop-opacity:1;"
+-         offset="0"
+-         id="stop8954" />
+-      <stop
+-         style="stop-color:#1f2727;stop-opacity:0;"
+-         offset="1"
+-         id="stop8956" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient8430">
+-      <stop
+-         style="stop-color:#1e2323;stop-opacity:1;"
+-         offset="0"
+-         id="stop8432" />
+-      <stop
+-         id="stop8438"
+-         offset="0.55992389"
+-         style="stop-color:#181d1d;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop8434" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient8398">
+-      <stop
+-         style="stop-color:#283131;stop-opacity:0;"
+-         offset="0"
+-         id="stop8400" />
+-      <stop
+-         id="stop8402"
+-         offset="0.5125587"
+-         style="stop-color:#1e2424;stop-opacity:0;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop8404" />
+-    </linearGradient>
+-    <linearGradient
+-       inkscape:collect="always"
+-       id="linearGradient4870">
+-      <stop
+-         style="stop-color:#c7bd80;stop-opacity:1;"
+-         offset="0"
+-         id="stop4872" />
+-      <stop
+-         style="stop-color:#c7bd80;stop-opacity:0;"
+-         offset="1"
+-         id="stop4874" />
+-    </linearGradient>
+-    <linearGradient
+-       inkscape:collect="always"
+-       id="linearGradient4862">
+-      <stop
+-         style="stop-color:#e2e2e2;stop-opacity:1;"
+-         offset="0"
+-         id="stop4864" />
+-      <stop
+-         style="stop-color:#e2e2e2;stop-opacity:0;"
+-         offset="1"
+-         id="stop4866" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4478">
+-      <stop
+-         style="stop-color:#f9eed3;stop-opacity:1;"
+-         offset="0"
+-         id="stop4480" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:0;"
+-         offset="1"
+-         id="stop4482" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4106">
+-      <stop
+-         style="stop-color:#d9e002;stop-opacity:1;"
+-         offset="0"
+-         id="stop4108" />
+-      <stop
+-         id="stop4114"
+-         offset="0.5"
+-         style="stop-color:#a9ae01;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#717501;stop-opacity:1;"
+-         offset="1"
+-         id="stop4110" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4084">
+-      <stop
+-         style="stop-color:#7d7d00;stop-opacity:1;"
+-         offset="0"
+-         id="stop4086" />
+-      <stop
+-         id="stop4088"
+-         offset="0.3636601"
+-         style="stop-color:#c6c700;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#f6f800;stop-opacity:1;"
+-         offset="1"
+-         id="stop4090" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4041">
+-      <stop
+-         id="stop4043"
+-         offset="0"
+-         style="stop-color:#ffff00;stop-opacity:1;" />
+-      <stop
+-         id="stop4045"
+-         offset="1"
+-         style="stop-color:#ffff00;stop-opacity:0;" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4025">
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:1;"
+-         offset="0"
+-         id="stop4027" />
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:0;"
+-         offset="1"
+-         id="stop4031" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient4013">
+-      <stop
+-         style="stop-color:#ffff00;stop-opacity:1;"
+-         offset="0"
+-         id="stop4015" />
+-      <stop
+-         style="stop-color:#b2b200;stop-opacity:1;"
+-         offset="1"
+-         id="stop4017" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3985">
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="0"
+-         id="stop3987" />
+-      <stop
+-         style="stop-color:#1d1d1d;stop-opacity:1;"
+-         offset="1"
+-         id="stop3989" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3961">
+-      <stop
+-         style="stop-color:#283131;stop-opacity:0;"
+-         offset="0"
+-         id="stop3963" />
+-      <stop
+-         id="stop3965"
+-         offset="0.5"
+-         style="stop-color:#1e2424;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop3967" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3951">
+-      <stop
+-         id="stop3953"
+-         offset="0"
+-         style="stop-color:#344040;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#222929;stop-opacity:1;"
+-         offset="0.5"
+-         id="stop3955" />
+-      <stop
+-         id="stop3957"
+-         offset="1"
+-         style="stop-color:#000000;stop-opacity:1;" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3909">
+-      <stop
+-         style="stop-color:#283131;stop-opacity:1;"
+-         offset="0"
+-         id="stop3911" />
+-      <stop
+-         id="stop3917"
+-         offset="0.5"
+-         style="stop-color:#1e2424;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="1"
+-         id="stop3913" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3537">
+-      <stop
+-         style="stop-color:#ada469;stop-opacity:1;"
+-         offset="0"
+-         id="stop3539" />
+-      <stop
+-         id="stop3545"
+-         offset="0.81132078"
+-         style="stop-color:#ada469;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#ffffff;stop-opacity:1;"
+-         offset="1"
+-         id="stop3541" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3317">
+-      <stop
+-         style="stop-color:#cfc690;stop-opacity:1"
+-         offset="0"
+-         id="stop3319" />
+-      <stop
+-         id="stop3321"
+-         offset="0.21161865"
+-         style="stop-color:#afa775;stop-opacity:1;" />
+-      <stop
+-         id="stop3323"
+-         offset="0.53408515"
+-         style="stop-color:#615c3a;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="0.76504093"
+-         id="stop3325" />
+-      <stop
+-         id="stop3327"
+-         offset="1"
+-         style="stop-color:#403518;stop-opacity:1;" />
+-    </linearGradient>
+-    <linearGradient
+-       id="linearGradient3239">
+-      <stop
+-         id="stop3251"
+-         offset="0"
+-         style="stop-color:#cfc690;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#afa775;stop-opacity:1;"
+-         offset="0.21161865"
+-         id="stop3267" />
+-      <stop
+-         style="stop-color:#615c3a;stop-opacity:1;"
+-         offset="0.53408515"
+-         id="stop3261" />
+-      <stop
+-         id="stop3265"
+-         offset="0.76504093"
+-         style="stop-color:#000000;stop-opacity:1;" />
+-      <stop
+-         style="stop-color:#403518;stop-opacity:1;"
+-         offset="1"
+-         id="stop3243" />
+-    </linearGradient>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3239"
+-       id="radialGradient3281"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
+-       spreadMethod="pad"
+-       cx="806.52582"
+-       cy="212.68117"
+-       fx="806.52582"
+-       fy="212.68117"
+-       r="48.363216" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3317"
+-       id="radialGradient3315"
+-       cx="543.6698"
+-       cy="147.3131"
+-       fx="543.6698"
+-       fy="147.3131"
+-       r="47.863216"
+-       gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3537"
+-       id="radialGradient3543"
+-       cx="385"
+-       cy="237.00504"
+-       fx="385"
+-       fy="237.00504"
+-       r="86.928574"
+-       gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3909"
+-       id="radialGradient3915"
+-       cx="418.30365"
+-       cy="342.47794"
+-       fx="418.30365"
+-       fy="342.47794"
+-       r="131.4509"
+-       gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3951"
+-       id="radialGradient3933"
+-       cx="397.16388"
+-       cy="336.95245"
+-       fx="397.16388"
+-       fy="336.95245"
+-       r="36.75"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3961"
+-       id="linearGradient3959"
+-       x1="398.21429"
+-       y1="343.52289"
+-       x2="379.28571"
+-       y2="265.30862"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="translate(450.03125,73.843964)" />
+-    <filter
+-       inkscape:collect="always"
+-       id="filter3981"
+-       x="-0.30000001"
+-       width="1.6"
+-       y="-0.30000001"
+-       height="1.6">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="2"
+-         id="feGaussianBlur3983" />
+-    </filter>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3985"
+-       id="radialGradient3991"
+-       cx="402.48898"
+-       cy="317.23578"
+-       fx="402.48898"
+-       fy="317.23578"
+-       r="23.714285"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3999">
+-      <path
+-         style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
+-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
+-         id="path4001"
+-         sodipodi:nodetypes="czzczzzzc" />
+-    </clipPath>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4013"
+-       id="radialGradient4056"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+-       cx="228.81355"
+-       cy="440.26971"
+-       fx="228.81355"
+-       fy="440.26971"
+-       r="119.17509" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4041"
+-       id="radialGradient4060"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+-       cx="275.4422"
+-       cy="335.34866"
+-       fx="275.4422"
+-       fy="335.34866"
+-       r="36.75" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4025"
+-       id="radialGradient4062"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+-       cx="275.4422"
+-       cy="335.34866"
+-       fx="275.4422"
+-       fy="335.34866"
+-       r="36.75" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4084"
+-       id="linearGradient4082"
+-       gradientUnits="userSpaceOnUse"
+-       x1="182.35046"
+-       y1="256.11136"
+-       x2="145.53348"
+-       y2="542.20502" />
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath4100">
+-      <path
+-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+-         d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
+-         id="path4102"
+-         sodipodi:nodetypes="ccccccc" />
+-    </clipPath>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4106"
+-       id="radialGradient4112"
+-       cx="250.22678"
+-       cy="475.09763"
+-       fx="250.22678"
+-       fy="475.09763"
+-       r="95.98877"
+-       gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
+-       gradientUnits="userSpaceOnUse" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4478"
+-       id="linearGradient4484"
+-       x1="412.08926"
+-       y1="404.91574"
+-       x2="417.375"
+-       y2="401.82648"
+-       gradientUnits="userSpaceOnUse" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4478"
+-       id="linearGradient4486"
+-       x1="411.91071"
+-       y1="404.91577"
+-       x2="417.375"
+-       y2="401.82648"
+-       gradientUnits="userSpaceOnUse" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4478"
+-       id="linearGradient4488"
+-       x1="411.91071"
+-       y1="405.54077"
+-       x2="417.375"
+-       y2="401.82648"
+-       gradientUnits="userSpaceOnUse" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4478"
+-       id="linearGradient4490"
+-       x1="412.08926"
+-       y1="405.54077"
+-       x2="417.375"
+-       y2="401.82648"
+-       gradientUnits="userSpaceOnUse" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4478"
+-       id="linearGradient4492"
+-       x1="411.73212"
+-       y1="405.54077"
+-       x2="417.375"
+-       y2="401.82648"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4862"
+-       id="radialGradient4868"
+-       cx="429.56738"
+-       cy="377.42877"
+-       fx="429.56738"
+-       fy="377.42877"
+-       r="72.079735"
+-       gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4870"
+-       id="radialGradient4876"
+-       cx="437.6991"
+-       cy="391.21735"
+-       fx="437.6991"
+-       fy="391.21735"
+-       r="36.611931"
+-       gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
+-       gradientUnits="userSpaceOnUse" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4013"
+-       id="radialGradient3585"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+-       cx="228.81355"
+-       cy="440.26971"
+-       fx="228.81355"
+-       fy="440.26971"
+-       r="119.17509" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4084"
+-       id="linearGradient3587"
+-       gradientUnits="userSpaceOnUse"
+-       x1="182.35046"
+-       y1="256.11136"
+-       x2="145.53348"
+-       y2="542.20502" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3317"
+-       id="radialGradient8410"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
+-       cx="317.78754"
+-       cy="129.65378"
+-       fx="317.78754"
+-       fy="129.65378"
+-       r="47.863216" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient8398"
+-       id="radialGradient8412"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
+-       cx="325.30847"
+-       cy="80.909554"
+-       fx="325.30847"
+-       fy="80.909554"
+-       r="26.937988" />
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8514">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+-         id="path8516"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8604">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+-         id="path8606"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8610">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+-         id="path8612"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8616">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+-         id="path8618"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8622">
+-      <path
+-         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
+-         id="path8624"
+-         sodipodi:nodetypes="czzzzzzczczczczzzc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8642">
+-      <path
+-         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+-         id="path8644"
+-         sodipodi:nodetypes="czzcczcc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8658">
+-      <path
+-         style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+-         id="path8660"
+-         sodipodi:nodetypes="czzzcczzcc" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8802"
+-       x="-0.35311759"
+-       width="1.7062352"
+-       y="-0.1817714"
+-       height="1.3635428">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="48.038491"
+-         id="feGaussianBlur8804" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8806"
+-       x="-0.61142862"
+-       width="2.2228572"
+-       y="-0.14930232"
+-       height="1.2986046">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="37.830213"
+-         id="feGaussianBlur8808" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8810"
+-       x="-0.23519406"
+-       width="1.4703881"
+-       y="-0.24500646"
+-       height="1.4900129">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="58.328041"
+-         id="feGaussianBlur8812" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8814"
+-       x="-0.20466694"
+-       width="1.4093339"
+-       y="-0.29007819"
+-       height="1.5801564">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="22.300169"
+-         id="feGaussianBlur8816" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8818"
+-       x="-0.34381232"
+-       width="1.6876246"
+-       y="-0.18433961"
+-       height="1.3686792">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="34.542167"
+-         id="feGaussianBlur8820" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8822"
+-       x="-0.2742857"
+-       width="1.5485713"
+-       y="-0.21333334"
+-       height="1.4266667">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="11.313708"
+-         id="feGaussianBlur8824" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8826"
+-       x="-0.25894088"
+-       width="1.5178818"
+-       y="-0.2236412"
+-       height="1.4472824">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="19.631544"
+-         id="feGaussianBlur8828" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8856"
+-       x="-0.3253231"
+-       width="1.6506462"
+-       y="-0.19013336"
+-       height="1.3802667">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="28.712591"
+-         id="feGaussianBlur8858" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8860"
+-       x="-0.38093024"
+-       width="1.7618605"
+-       y="-0.17518716"
+-       height="1.3503743">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="19.304015"
+-         id="feGaussianBlur8862" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8888"
+-       x="-0.2112188"
+-       width="1.4224375"
+-       y="-0.16808605"
+-       height="1.3361721">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="8.3693583"
+-         id="feGaussianBlur8890" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8892"
+-       x="-0.18692794"
+-       width="1.3738559"
+-       y="-0.23646873"
+-       height="1.4729375">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="31.21228"
+-         id="feGaussianBlur8894" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8906">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+-         id="path8908"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8940"
+-       x="-0.25152978"
+-       width="1.5030596"
+-       y="-0.053035267"
+-       height="1.1060705">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="13.024603"
+-         id="feGaussianBlur8942" />
+-    </filter>
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient8952"
+-       id="linearGradient8958"
+-       x1="609.31244"
+-       y1="239.46866"
+-       x2="560.83142"
+-       y2="262.86206"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="translate(450.03125,73.843964)" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient8964"
+-       id="linearGradient8970"
+-       x1="603.84064"
+-       y1="627.85303"
+-       x2="616.24396"
+-       y2="585.42664"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="translate(450.03125,73.843964)" />
+-    <filter
+-       inkscape:collect="always"
+-       id="filter9020"
+-       x="-0.32861114"
+-       width="1.6572223"
+-       y="-0.182"
+-       height="1.364">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="20.912684"
+-         id="feGaussianBlur9022" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter9024"
+-       x="-0.55453134"
+-       width="2.1090627"
+-       y="-0.51434779"
+-       height="2.0286956">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="20.912684"
+-         id="feGaussianBlur9026" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter9044"
+-       x="-0.32631579"
+-       width="1.6526316"
+-       y="-0.84545463"
+-       height="2.6909094">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="21.92031"
+-         id="feGaussianBlur9046" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter9048"
+-       x="-0.40879121"
+-       width="1.8175824"
+-       y="-0.71538466"
+-       height="2.4307692">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="21.92031"
+-         id="feGaussianBlur9050" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter3587"
+-       x="-0.1">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="8.881432"
+-         id="feGaussianBlur3589" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3602">
+-      <path
+-         sodipodi:nodetypes="czzzzzzczczczczzzc"
+-         id="path3604"
+-         d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
+-         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4120"
+-       x="-0.2770822"
+-       width="1.5541644"
+-       y="-0.32482043"
+-       height="1.6496409">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="19.956289"
+-         id="feGaussianBlur4122" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3631">
+-      <path
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+-         id="path3633"
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3665">
+-      <path
+-         sodipodi:nodetypes="czzcczcc"
+-         id="path3667"
+-         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+-         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3677">
+-      <path
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+-         id="path3679"
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter3898">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="10.892985"
+-         id="feGaussianBlur3900" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4130"
+-       x="-0.49509686"
+-       width="1.9901937"
+-       y="-0.26708817"
+-       height="1.5341763">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="10.730622"
+-         id="feGaussianBlur4132" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4141"
+-       x="-0.40611032"
+-       width="1.8122206"
+-       y="-0.30260596"
+-       height="1.6052119">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="9.8586086"
+-         id="feGaussianBlur4143" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath4177">
+-      <path
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+-         id="path4179"
+-         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4185">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="3.6164709"
+-         id="feGaussianBlur4187" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4105">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="3.8640966"
+-         id="feGaussianBlur4107" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath2833">
+-      <path
+-         style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+-         id="path2835"
+-         sodipodi:nodetypes="czzzcczzcc" />
+-    </clipPath>
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient2843"
+-       id="linearGradient2841"
+-       gradientUnits="userSpaceOnUse"
+-       x1="347.89655"
+-       y1="1070.2124"
+-       x2="275.58191"
+-       y2="867.97992" />
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3627"
+-       id="linearGradient3688"
+-       gradientUnits="userSpaceOnUse"
+-       x1="699.32867"
+-       y1="269.76755"
+-       x2="698.97504"
+-       y2="346.1351" />
+-    <mask
+-       maskUnits="userSpaceOnUse"
+-       id="mask3684">
+-      <path
+-         sodipodi:type="arc"
+-         style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         id="path3686"
+-         sodipodi:cx="579.474"
+-         sodipodi:cy="260.57516"
+-         sodipodi:rx="192.6866"
+-         sodipodi:ry="164.04877"
+-         d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
+-         transform="translate(-174.03125,62.156036)" />
+-    </mask>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3622">
+-      <path
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
+-         id="path3624"
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3636">
+-      <path
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+-         id="path3638"
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    </clipPath>
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3660"
+-       id="linearGradient3666"
+-       x1="1255.7386"
+-       y1="667.09216"
+-       x2="893.69995"
+-       y2="858.01099"
+-       gradientUnits="userSpaceOnUse" />
+-    <filter
+-       inkscape:collect="always"
+-       id="filter3779"
+-       x="-0.087980822"
+-       width="1.1759616"
+-       y="-0.17728332"
+-       height="1.3545666">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="16.340344"
+-         id="feGaussianBlur3781" />
+-    </filter>
+-    <filter
+-       id="filter3785"
+-       inkscape:label="White Fur">
+-      <feTurbulence
+-         id="feTurbulence3787"
+-         in="SourceAlpha"
+-         type="fractalNoise"
+-         baseFrequency="0.24044943820224721"
+-         numOctaves="10"
+-         seed="655"
+-         result="result0" />
+-      <feDisplacementMap
+-         id="feDisplacementMap3789"
+-         in="SourceGraphic"
+-         in2="result0"
+-         scale="62"
+-         xChannelSelector="B"
+-         yChannelSelector="G" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter3677">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="2.0397518"
+-         id="feGaussianBlur3679" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3722">
+-      <path
+-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+-         id="path3724"
+-         sodipodi:nodetypes="czzzzzzzzcc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3986">
+-      <path
+-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+-         id="path3988"
+-         sodipodi:nodetypes="czzzzzzzzcc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3992">
+-      <path
+-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+-         id="path3994"
+-         sodipodi:nodetypes="czzzzzzzzcc" />
+-    </clipPath>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath3998">
+-      <path
+-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
+-         id="path4000"
+-         sodipodi:nodetypes="cscccccccccccc" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4002"
+-       x="-0.24334238"
+-       width="1.4866848"
+-       y="-0.39104807"
+-       height="1.7820961">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="14.589518"
+-         id="feGaussianBlur4004" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4010"
+-       x="-0.14577261"
+-       width="1.2915452"
+-       y="-0.23523259"
+-       height="1.4704652">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="4.4442907"
+-         id="feGaussianBlur4012" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4053">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.6062947"
+-         id="feGaussianBlur4055" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4079">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="6.5887624"
+-         id="feGaussianBlur4081" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter4083">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.5052066"
+-         id="feGaussianBlur4085" />
+-    </filter>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient4113"
+-       id="radialGradient4119"
+-       cx="296.33783"
+-       cy="427.17749"
+-       fx="296.33783"
+-       fy="427.17749"
+-       r="19.704132"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6949"
+-       x="-0.10294895"
+-       width="1.2058979"
+-       y="-0.34224695"
+-       height="1.6844939">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6951" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6953"
+-       x="-0.098320946"
+-       width="1.1966419"
+-       y="-0.19750816"
+-       height="1.3950163">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6955" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6957"
+-       x="-0.098213427"
+-       width="1.1964267"
+-       y="-0.19838208"
+-       height="1.3967642">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6959" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6961"
+-       x="-0.09919104"
+-       width="1.1983821"
+-       y="-0.22643611"
+-       height="1.4528722">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6963" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6965"
+-       x="-0.099081434"
+-       width="1.1981629"
+-       y="-0.22529824"
+-       height="1.4505965">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6967" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6969"
+-       x="-0.10450897"
+-       width="1.2090179"
+-       y="-0.40468886"
+-       height="1.8093777">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6971" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6973"
+-       x="-0.10330495"
+-       width="1.2066098"
+-       y="-0.36439717"
+-       height="1.7287945">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6975" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6977"
+-       x="-0.10224481"
+-       width="1.2044896"
+-       y="-0.32371372"
+-       height="1.6474274">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6979" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6981"
+-       x="-0.10052545"
+-       width="1.2010509"
+-       y="-0.2742162"
+-       height="1.5484324">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6983" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6985"
+-       x="-0.098428868"
+-       width="1.1968577"
+-       y="-0.20853186"
+-       height="1.4170637">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6987" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6989"
+-       x="-0.098428868"
+-       width="1.1968577"
+-       y="-0.20287035"
+-       height="1.4057407">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6991" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6993"
+-       x="-0.098213255"
+-       width="1.1964265"
+-       y="-0.19838208"
+-       height="1.3967642">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6995" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter6997">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur6999" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7001">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.1675612"
+-         id="feGaussianBlur7003" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7285"
+-       x="-0.030884685"
+-       width="1.0617694"
+-       y="-0.10267408"
+-       height="1.2053483">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7287" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7289">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7291" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7293">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7295" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7297">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7299" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7301">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7303" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7305">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7307" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7309">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7311" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7313">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7315" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7317">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7319" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7321">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7323" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7325"
+-       x="-0.031352691"
+-       width="1.0627054"
+-       y="-0.12140666"
+-       height="1.2428133">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7327" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7329"
+-       x="-0.030991485"
+-       width="1.061983"
+-       y="-0.10931916"
+-       height="1.2186383">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7331" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7333">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7335" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7337">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.35026836"
+-         id="feGaussianBlur7339" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7345">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.7233839"
+-         id="feGaussianBlur7347" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath7421">
+-      <path
+-         sodipodi:type="inkscape:offset"
+-         inkscape:radius="0"
+-         inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
+-         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         id="path7423"
+-         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+-         transform="translate(8.0045714e-2,-3.125e-2)" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7578"
+-       x="-0.08160872"
+-       width="1.1632174"
+-       y="-0.22659944"
+-       height="1.4531989">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="2.437399"
+-         id="feGaussianBlur7580" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7594"
+-       x="-0.040804356"
+-       width="1.0816087"
+-       y="-0.11329972"
+-       height="1.2265995">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="1.2186995"
+-         id="feGaussianBlur7596" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath7606">
+-      <path
+-         id="path7608"
+-         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+-         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter7610"
+-       x="-0.021942979"
+-       width="1.0438859"
+-       y="-0.10017137"
+-       height="1.2003427">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="0.57530213"
+-         id="feGaussianBlur7612" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath7616">
+-      <path
+-         id="path7618"
+-         d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
+-         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <linearGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient7622"
+-       id="linearGradient7708"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="translate(-19.091883,4.2426407)"
+-       x1="774.97668"
+-       y1="-211.87105"
+-       x2="755.11584"
+-       y2="-202.67865" />
+-    <mask
+-       maskUnits="userSpaceOnUse"
+-       id="mask7704">
+-      <path
+-         style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+-         d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
+-         id="path7706" />
+-    </mask>
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient8430"
+-       id="radialGradient7904"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
+-       cx="142.95833"
+-       cy="107.09234"
+-       fx="142.95833"
+-       fy="107.09234"
+-       r="66.981766" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient3317"
+-       id="radialGradient7906"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
+-       cx="317.78754"
+-       cy="129.65378"
+-       fx="317.78754"
+-       fy="129.65378"
+-       r="47.863216" />
+-    <radialGradient
+-       inkscape:collect="always"
+-       xlink:href="#linearGradient8398"
+-       id="radialGradient7908"
+-       gradientUnits="userSpaceOnUse"
+-       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
+-       cx="325.30847"
+-       cy="80.909554"
+-       fx="325.30847"
+-       fy="80.909554"
+-       r="26.937988" />
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8209">
+-      <path
+-         sodipodi:nodetypes="czcc"
+-         id="path8211"
+-         d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
+-         style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8225">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="10.661912"
+-         id="feGaussianBlur8227" />
+-    </filter>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8333">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="7.18"
+-         id="feGaussianBlur8335" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8338">
+-      <path
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+-         id="path8340"
+-         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8354">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="6.82"
+-         id="feGaussianBlur8356" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8359">
+-      <path
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+-         id="path8361"
+-         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8379"
+-       x="-0.14413793"
+-       width="1.288276"
+-       y="-0.10278689"
+-       height="1.2055738">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="7.389266"
+-         id="feGaussianBlur8381" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8392">
+-      <path
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+-         id="path8394"
+-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-    <filter
+-       inkscape:collect="always"
+-       id="filter8404"
+-       x="-0.090268657"
+-       width="1.1805373"
+-       y="-0.10250848"
+-       height="1.205017">
+-      <feGaussianBlur
+-         inkscape:collect="always"
+-         stdDeviation="5.3457272"
+-         id="feGaussianBlur8406" />
+-    </filter>
+-    <clipPath
+-       clipPathUnits="userSpaceOnUse"
+-       id="clipPath8417">
+-      <path
+-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+-         id="path8419"
+-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </clipPath>
+-  </defs>
+-  <metadata
+-     id="metadata7">
+-    <rdf:RDF>
+-      <cc:Work
+-         rdf:about="">
+-        <dc:format>image/svg+xml</dc:format>
+-        <dc:type
+-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+-      </cc:Work>
+-    </rdf:RDF>
+-  </metadata>
+-  <g
+-     inkscape:groupmode="layer"
+-     id="layer1"
+-     inkscape:label="Shadow">
+-    <path
+-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
+-       d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
+-       id="path10326"
+-       sodipodi:nodetypes="cccccccccsccccccccccc"
+-       transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
+-       inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
+-       inkscape:export-xdpi="142.10527"
+-       inkscape:export-ydpi="142.10527" />
+-  </g>
+-  <g
+-     inkscape:groupmode="layer"
+-     id="layer20"
+-     inkscape:label="New Ear">
+-    <g
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g7882"
+-       transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
+-      <path
+-         sodipodi:nodetypes="czzzzcc"
+-         id="path7876"
+-         d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
+-         style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <path
+-         sodipodi:nodetypes="czzzzzc"
+-         id="path7878"
+-         d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
+-         style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <path
+-         sodipodi:nodetypes="czccssc"
+-         id="path7880"
+-         d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
+-         style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-    </g>
+-  </g>
+-  <g
+-     inkscape:groupmode="layer"
+-     id="layer21"
+-     inkscape:label="Rendered2"
+-     style="display:inline">
+-    <path
+-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
+-       id="path7917"
+-       sodipodi:nodetypes="czzzcczzcc" />
+-    <path
+-       style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
+-       d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
+-       id="path7919"
+-       clip-path="url(#clipPath8658)"
+-       sodipodi:nodetypes="ccccc"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
+-       d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
+-       id="path7923"
+-       clip-path="url(#clipPath2833)"
+-       sodipodi:nodetypes="cccccc"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
+-       id="path7921"
+-       sodipodi:nodetypes="czzcczcc" />
+-    <path
+-       style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
+-       d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
+-       id="path7925"
+-       sodipodi:nodetypes="ccccccc"
+-       clip-path="url(#clipPath3665)"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
+-       id="path7927"
+-       sodipodi:nodetypes="czzzzcc" />
+-    <path
+-       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
+-       d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
+-       id="path7929"
+-       clip-path="url(#clipPath8642)"
+-       sodipodi:nodetypes="ccccc"
+-       transform="translate(276,136)" />
+-    <g
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g7931"
+-       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+-       inkscape:transform-center-x="-347.89063"
+-       inkscape:transform-center-y="-28.255779">
+-      <path
+-         style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+-         id="path7933" />
+-      <g
+-         clip-path="url(#clipPath7616)"
+-         style="display:inline;filter:url(#filter7610);enable-background:new"
+-         id="g7935"
+-         transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
+-        <path
+-           sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
+-           id="path7937"
+-           d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-        <path
+-           id="path7939"
+-           d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-           sodipodi:nodetypes="cssccsscc" />
+-        <path
+-           id="path7941"
+-           d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-           sodipodi:nodetypes="csccscc" />
+-      </g>
+-      <g
+-         clip-path="url(#clipPath7606)"
+-         id="g7943">
+-        <path
+-           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
+-           d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
+-           id="path7945"
+-           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+-        <path
+-           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
+-           d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
+-           id="path7947"
+-           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+-      </g>
+-    </g>
+-    <path
+-       style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
+-       id="path7949"
+-       sodipodi:nodetypes="cscccccccccccc" />
+-    <path
+-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
+-       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
+-       id="path7951"
+-       sodipodi:nodetypes="ccccczzzcc"
+-       clip-path="url(#clipPath8616)"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
+-       id="path7953"
+-       sodipodi:nodetypes="czcc" />
+-    <path
+-       style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
+-       d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
+-       id="path7955"
+-       sodipodi:nodetypes="cccc"
+-       clip-path="url(#clipPath8209)"
+-       transform="translate(276,136)" />
+-    <g
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g7957"
+-       clip-path="url(#clipPath3998)">
+-      <g
+-         transform="translate(-174.03125,62.156036)"
+-         style="filter:url(#filter3677)"
+-         id="g7959">
+-        <g
+-           id="g7961"
+-           style="filter:url(#filter3785)">
+-          <path
+-             sodipodi:nodetypes="czzzzzzzzzz"
+-             id="path7963"
+-             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <rect
+-             y="412.60312"
+-             x="343.6539"
+-             height="181.01935"
+-             width="381.83765"
+-             id="rect7965"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-        <g
+-           id="g7967"
+-           style="filter:url(#filter3785)">
+-          <path
+-             sodipodi:nodetypes="czzzcc"
+-             id="path7969"
+-             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-             transform="translate(174.03125,-62.156036)" />
+-          <rect
+-             y="344.82138"
+-             x="702.86414"
+-             height="162.63455"
+-             width="207.8894"
+-             id="rect7971"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-      </g>
+-      <g
+-         transform="translate(-174.03125,62.156036)"
+-         style="opacity:0.18000004;display:inline;enable-background:new"
+-         id="g7973">
+-        <g
+-           id="g7975"
+-           style="filter:url(#filter3785)">
+-          <path
+-             sodipodi:nodetypes="czzzzzzzzzz"
+-             id="path7977"
+-             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <rect
+-             y="412.60312"
+-             x="343.6539"
+-             height="181.01935"
+-             width="381.83765"
+-             id="rect7979"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-        <g
+-           id="g7981"
+-           style="filter:url(#filter3785)">
+-          <path
+-             sodipodi:nodetypes="czzzcc"
+-             id="path7983"
+-             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-             transform="translate(174.03125,-62.156036)" />
+-          <rect
+-             y="344.82138"
+-             x="702.86414"
+-             height="162.63455"
+-             width="207.8894"
+-             id="rect7985"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-      </g>
+-    </g>
+-    <path
+-       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
+-       d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
+-       id="path7987"
+-       clip-path="url(#clipPath8604)"
+-       sodipodi:nodetypes="cccccscc"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
+-       id="path7989"
+-       sodipodi:nodetypes="czzzzzzc" />
+-    <path
+-       style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
+-       id="path7991"
+-       sodipodi:nodetypes="czzzzc" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
+-       id="path7993"
+-       sodipodi:cx="385"
+-       sodipodi:cy="237.00504"
+-       sodipodi:rx="86.428574"
+-       sodipodi:ry="73.928574"
+-       d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
+-       transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
+-       clip-path="url(#clipPath4100)" />
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
+-       id="path7995"
+-       sodipodi:nodetypes="csczzc"
+-       mask="url(#mask3684)" />
+-    <path
+-       style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
+-       id="path7997"
+-       sodipodi:nodetypes="czcc" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       id="path7999"
+-       sodipodi:cx="409.28571"
+-       sodipodi:cy="306.64789"
+-       sodipodi:rx="36.25"
+-       sodipodi:ry="36.25"
+-       d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
+-       transform="translate(449.49554,74.915393)" />
+-    <path
+-       style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
+-       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
+-       id="path8001"
+-       sodipodi:nodetypes="cccccccccc"
+-       clip-path="url(#clipPath8616)"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
+-       d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
+-       id="path8003"
+-       sodipodi:nodetypes="czzcc" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       id="path8005"
+-       sodipodi:cx="410"
+-       sodipodi:cy="306.64789"
+-       sodipodi:rx="23.214285"
+-       sodipodi:ry="23.214285"
+-       d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
+-       transform="translate(449.67411,74.915393)" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
+-       id="path8007"
+-       sodipodi:cx="414.28571"
+-       sodipodi:cy="303.07648"
+-       sodipodi:rx="7.5"
+-       sodipodi:ry="7.5"
+-       d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
+-       transform="translate(451.99554,73.486821)" />
+-    <path
+-       style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
+-       id="path8009"
+-       sodipodi:nodetypes="czzzczc" />
+-    <g
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g8011"
+-       transform="translate(780.74553,74.55825)">
+-      <path
+-         transform="translate(-329.81481,0)"
+-         clip-path="url(#clipPath3999)"
+-         sodipodi:nodetypes="czzczzzszc"
+-         id="path8013"
+-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+-         style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
+-      <path
+-         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
+-         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+-         sodipodi:ry="134.00607"
+-         sodipodi:rx="64.715881"
+-         sodipodi:cy="338.07648"
+-         sodipodi:cx="183.57143"
+-         id="path8015"
+-         style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
+-         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+-         sodipodi:ry="134.00607"
+-         sodipodi:rx="64.715881"
+-         sodipodi:cy="338.07648"
+-         sodipodi:cx="183.57143"
+-         id="path8017"
+-         style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="translate(-329.81481,3e-7)"
+-         clip-path="url(#clipPath3999)"
+-         sodipodi:nodetypes="czzczzzszc"
+-         id="path8019"
+-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
+-    </g>
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       id="path8021"
+-       sodipodi:cx="310.71429"
+-       sodipodi:cy="398.07648"
+-       sodipodi:rx="19.704132"
+-       sodipodi:ry="19.704132"
+-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+-       transform="translate(452.55663,72.581273)" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
+-       id="path8023"
+-       sodipodi:cx="310.71429"
+-       sodipodi:cy="398.07648"
+-       sodipodi:rx="19.704132"
+-       sodipodi:ry="19.704132"
+-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+-       transform="translate(450.55663,72.581273)" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       id="path8025"
+-       sodipodi:cx="310.71429"
+-       sodipodi:cy="398.07648"
+-       sodipodi:rx="19.704132"
+-       sodipodi:ry="19.704132"
+-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+-       transform="translate(450.55663,72.581273)" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
+-       id="path8027"
+-       sodipodi:cx="429.56738"
+-       sodipodi:cy="377.42877"
+-       sodipodi:rx="72.079735"
+-       sodipodi:ry="44.547726"
+-       d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
+-       transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
+-       inkscape:transform-center-x="-47.231976"
+-       inkscape:transform-center-y="-3.6935079" />
+-    <path
+-       sodipodi:type="arc"
+-       style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
+-       id="path8029"
+-       sodipodi:cx="437.6991"
+-       sodipodi:cy="391.21735"
+-       sodipodi:rx="36.611931"
+-       sodipodi:ry="22.627417"
+-       d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
+-       transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
+-       inkscape:transform-center-x="-20.955902"
+-       inkscape:transform-center-y="-13.056625" />
+-    <g
+-       transform="translate(450.03125,73.843964)"
+-       id="g8031"
+-       style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
+-      <path
+-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+-         sodipodi:ry="3.2142856"
+-         sodipodi:rx="3.2142856"
+-         sodipodi:cy="401.82648"
+-         sodipodi:cx="413.66071"
+-         id="path8033"
+-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="translate(13.125009,8.1249913)"
+-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+-         sodipodi:ry="3.2142856"
+-         sodipodi:rx="3.2142856"
+-         sodipodi:cy="401.82648"
+-         sodipodi:cx="413.66071"
+-         id="path8035"
+-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="translate(32.946437,7.4999913)"
+-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+-         sodipodi:ry="3.2142856"
+-         sodipodi:rx="3.2142856"
+-         sodipodi:cy="401.82648"
+-         sodipodi:cx="413.66071"
+-         id="path8037"
+-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="translate(24.910723,-10.267866)"
+-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+-         sodipodi:ry="3.2142856"
+-         sodipodi:rx="3.2142856"
+-         sodipodi:cy="401.82648"
+-         sodipodi:cx="413.66071"
+-         id="path8039"
+-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-      <path
+-         transform="translate(47.589294,-0.6250087)"
+-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+-         sodipodi:ry="3.2142856"
+-         sodipodi:rx="3.2142856"
+-         sodipodi:cy="401.82648"
+-         sodipodi:cx="413.66071"
+-         id="path8041"
+-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-         sodipodi:type="arc" />
+-    </g>
+-    <path
+-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
+-       id="path8043"
+-       sodipodi:nodetypes="ccccccccc" />
+-    <path
+-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
+-       id="path8045"
+-       sodipodi:nodetypes="cccccccccccc" />
+-    <path
+-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
+-       id="path8047"
+-       sodipodi:nodetypes="ccccccccccccc" />
+-    <path
+-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
+-       d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
+-       id="path8049"
+-       clip-path="url(#clipPath8514)"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
+-       id="path8051" />
+-    <path
+-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+-       d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
+-       id="path8053"
+-       clip-path="url(#clipPath8610)"
+-       sodipodi:nodetypes="cccccscccc"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
+-       id="path8055"
+-       sodipodi:nodetypes="czzzzzzczczczczzzc" />
+-    <path
+-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
+-       d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
+-       id="path8057"
+-       clip-path="url(#clipPath8622)"
+-       sodipodi:nodetypes="cccccccccc"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+-       d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
+-       id="path8059"
+-       clip-path="url(#clipPath8906)"
+-       sodipodi:nodetypes="cczcccccc"
+-       transform="translate(276,136)" />
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
+-       d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
+-       id="path8061"
+-       sodipodi:nodetypes="cccccccccccc"
+-       clip-path="url(#clipPath3602)" />
+-    <path
+-       style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+-       d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
+-       id="path8063"
+-       sodipodi:nodetypes="czzzzzzzzcc" />
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
+-       d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
+-       id="path8065"
+-       sodipodi:nodetypes="czczzcc"
+-       clip-path="url(#clipPath3992)" />
+-    <g
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g8067"
+-       clip-path="url(#clipPath3986)">
+-      <g
+-         transform="translate(-174.03125,62.156036)"
+-         style="filter:url(#filter3677)"
+-         id="g8069">
+-        <g
+-           style="filter:url(#filter3785)"
+-           id="g8071">
+-          <path
+-             sodipodi:nodetypes="czzccccc"
+-             id="path8073"
+-             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-             transform="translate(174.03125,-62.156036)" />
+-          <rect
+-             y="486.14224"
+-             x="1197.8389"
+-             height="309.71277"
+-             width="333.75412"
+-             id="rect8075"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-      </g>
+-      <g
+-         transform="translate(-174.03125,62.156036)"
+-         style="opacity:0.18000004;display:inline;enable-background:new"
+-         id="g8077">
+-        <g
+-           style="filter:url(#filter3785)"
+-           id="g8079">
+-          <path
+-             sodipodi:nodetypes="czzccccc"
+-             id="path8081"
+-             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-             transform="translate(174.03125,-62.156036)" />
+-          <rect
+-             y="486.14224"
+-             x="1197.8389"
+-             height="309.71277"
+-             width="333.75412"
+-             id="rect8083"
+-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-        </g>
+-      </g>
+-    </g>
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
+-       d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
+-       id="path8085"
+-       clip-path="url(#clipPath3722)"
+-       sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
+-    <g
+-       style="opacity:1;display:inline;enable-background:new"
+-       id="g8087"
+-       mask="url(#mask7704)"
+-       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+-       inkscape:transform-center-x="-185.09603"
+-       inkscape:transform-center-y="-12.859654">
+-      <path
+-         transform="translate(8.0045714e-2,-3.125e-2)"
+-         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+-         id="path8089"
+-         sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
+-      <g
+-         clip-path="url(#clipPath7421)"
+-         id="g8091">
+-        <path
+-           id="path8093"
+-           d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
+-           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+-        <path
+-           id="path8095"
+-           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
+-        <path
+-           id="path8097"
+-           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
+-        <path
+-           id="path8099"
+-           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
+-        <path
+-           id="path8101"
+-           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
+-           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+-        <path
+-           id="path8103"
+-           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
+-        <path
+-           id="path8105"
+-           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
+-        <path
+-           id="path8107"
+-           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
+-        <path
+-           id="path8109"
+-           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
+-        <path
+-           id="path8111"
+-           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
+-        <path
+-           id="path8113"
+-           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
+-        <path
+-           id="path8115"
+-           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
+-        <path
+-           id="path8117"
+-           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
+-        <path
+-           id="path8119"
+-           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
+-        <g
+-           id="g8121"
+-           style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
+-          <path
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8123"
+-             d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+-          <path
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8125"
+-             d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8127"
+-             d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8129"
+-             d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.3190906"
+-             inkscape:transform-center-x="13.852145"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8131"
+-             d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.3190906"
+-             inkscape:transform-center-x="13.852145"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8133"
+-             d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.3190906"
+-             inkscape:transform-center-x="13.852145"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8135"
+-             d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.9269042"
+-             inkscape:transform-center-x="13.64141"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8137"
+-             d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.1542119"
+-             inkscape:transform-center-x="13.55068"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8139"
+-             d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.4740887"
+-             inkscape:transform-center-x="13.41151"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8141"
+-             d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.79376"
+-             inkscape:transform-center-x="13.258805"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8143"
+-             d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8145"
+-             d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8147"
+-             d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8149"
+-             d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8151"
+-             d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8153"
+-             d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8155"
+-             d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8157"
+-             d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8159"
+-             d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8161"
+-             d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.7433893"
+-             inkscape:transform-center-x="13.28378"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8163"
+-             d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-5.1360724"
+-             inkscape:transform-center-x="13.55813"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8165"
+-             d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.6370147"
+-             inkscape:transform-center-x="13.74758"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8167"
+-             d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             inkscape:transform-center-y="-4.4842392"
+-             inkscape:transform-center-x="13.79933"
+-             sodipodi:nodetypes="czzzczzc"
+-             id="path8169"
+-             d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+-          <path
+-             sodipodi:nodetypes="czczc"
+-             id="path8171"
+-             d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
+-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+-        </g>
+-        <path
+-           id="path8173"
+-           d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
+-           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+-        <path
+-           id="path8175"
+-           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
+-        <path
+-           id="path8177"
+-           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
+-        <path
+-           id="path8179"
+-           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
+-        <path
+-           id="path8181"
+-           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
+-           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+-        <path
+-           id="path8183"
+-           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
+-        <path
+-           id="path8185"
+-           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
+-        <path
+-           id="path8187"
+-           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
+-        <path
+-           id="path8189"
+-           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
+-        <path
+-           id="path8191"
+-           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
+-        <path
+-           id="path8193"
+-           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
+-        <path
+-           id="path8195"
+-           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
+-        <path
+-           id="path8197"
+-           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
+-        <path
+-           id="path8199"
+-           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
+-      </g>
+-    </g>
+-    <path
+-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
+-       id="path8201"
+-       sodipodi:nodetypes="ccccccccc" />
+-    <path
+-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
+-       id="path8203"
+-       sodipodi:nodetypes="ccccccccccc" />
+-  </g>
+-  <g
+-     inkscape:groupmode="layer"
+-     id="layer15"
+-     inkscape:label="Feet"
+-     style="display:inline">
+-    <path
+-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
+-       d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
+-       id="path8994" />
+-    <path
+-       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
+-       id="path4189"
+-       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+-       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+-       id="path4191"
+-       sodipodi:nodetypes="cccccccccccccccccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+-    <path
+-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+-       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+-       id="path4193"
+-       clip-path="url(#clipPath3677)"
+-       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+-    <g
+-       id="g3617"
+-       clip-path="url(#clipPath3622)"
+-       transform="translate(276,136)">
+-      <path
+-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
+-         id="path4195"
+-         d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+-      <path
+-         sodipodi:nodetypes="ccccccccccccc"
+-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
+-         id="path4197"
+-         d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+-    </g>
+-    <path
+-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+-       d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
+-       id="path4199"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
+-    <path
+-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
+-       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+-       id="path4201"
+-       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+-       clip-path="url(#clipPath4177)"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+-       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+-       id="path4203"
+-       sodipodi:nodetypes="cccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+-       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+-       id="path4205"
+-       sodipodi:nodetypes="cccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+-    <g
+-       id="g8317"
+-       style="filter:url(#filter8333)"
+-       clip-path="url(#clipPath8338)"
+-       transform="translate(276,136)">
+-      <path
+-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+-         clip-path="none"
+-         sodipodi:nodetypes="ccccc"
+-         id="path4209"
+-         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <rect
+-         y="757.19519"
+-         x="-55"
+-         height="177"
+-         width="182"
+-         id="rect8315"
+-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </g>
+-    <g
+-       id="g8346"
+-       style="filter:url(#filter8354)"
+-       clip-path="url(#clipPath8359)"
+-       transform="translate(276,136)">
+-      <path
+-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+-         clip-path="none"
+-         sodipodi:nodetypes="ccccccc"
+-         id="path4207"
+-         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <rect
+-         y="696.19519"
+-         x="-22"
+-         height="176"
+-         width="165"
+-         id="rect8344"
+-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </g>
+-  </g>
+-  <g
+-     inkscape:groupmode="layer"
+-     id="layer16"
+-     inkscape:label="Left Foot"
+-     style="display:inline">
+-    <path
+-       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+-       d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
+-       id="path8848"
+-       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+-       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+-       id="path3635"
+-       sodipodi:nodetypes="cccccccccccccccccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="translate(276,136)" />
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+-       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+-       id="path3669"
+-       clip-path="url(#clipPath3677)"
+-       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
+-    <g
+-       id="g3628"
+-       clip-path="url(#clipPath3636)"
+-       transform="translate(276,136)">
+-      <path
+-         id="path8988"
+-         d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+-      <path
+-         id="path8990"
+-         d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+-    </g>
+-    <path
+-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+-       d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
+-       id="path8992" />
+-    <path
+-       transform="translate(450.03125,73.843964)"
+-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
+-       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+-       id="path4149"
+-       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+-       clip-path="url(#clipPath4177)" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+-       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+-       id="path3902"
+-       sodipodi:nodetypes="cccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="translate(276,136)" />
+-    <path
+-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+-       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+-       id="path4135"
+-       sodipodi:nodetypes="cccccccc"
+-       clip-path="url(#clipPath3631)"
+-       transform="translate(276,136)" />
+-    <g
+-       id="g8367"
+-       style="filter:url(#filter8379)"
+-       clip-path="url(#clipPath8392)"
+-       transform="translate(276,136)">
+-      <path
+-         clip-path="none"
+-         sodipodi:nodetypes="ccccccc"
+-         id="path4145"
+-         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <rect
+-         y="650.19098"
+-         x="877.51953"
+-         height="172.53406"
+-         width="123.03658"
+-         id="rect8365"
+-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </g>
+-    <g
+-       id="g8400"
+-       style="filter:url(#filter8404)"
+-       clip-path="url(#clipPath8417)"
+-       transform="translate(276,136)">
+-      <path
+-         clip-path="none"
+-         sodipodi:nodetypes="ccccc"
+-         id="path4147"
+-         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-      <rect
+-         y="677.06104"
+-         x="924.89569"
+-         height="125.1579"
+-         width="142.12846"
+-         id="rect8398"
+-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+-    </g>
+-  </g>
+-</svg>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/logo.txt linux-2.6.29-rc3.owrt/Documentation/logo.txt
+--- linux-2.6.29.owrt/Documentation/logo.txt   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/logo.txt       2009-05-10 23:48:28.000000000 +0200
+@@ -1,4 +1,13 @@
+-Tux is taking a three month sabbatical to work as a barber, so Tuz is
+-standing in.  He's taken pains to ensure you'll hardly notice.
++This is the full-colour version of the currently unofficial Linux logo
++("currently unofficial" just means that there has been no paperwork and
++that I have not really announced it yet).  It was created by Larry Ewing,
++and is freely usable as long as you acknowledge Larry as the original
++artist. 
++
++Note that there are black-and-white versions of this available that
++scale down to smaller sizes and are better for letterheads or whatever
++you want to use it for: for the full range of logos take a look at
++Larry's web-page:
++
++      http://www.isc.tamu.edu/~lewing/linux/
+-Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/networking/alias.txt linux-2.6.29-rc3.owrt/Documentation/networking/alias.txt
+--- linux-2.6.29.owrt/Documentation/networking/alias.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/networking/alias.txt   2009-05-10 23:48:28.000000000 +0200
+@@ -2,14 +2,14 @@
+ IP-Aliasing:
+ ============
+-IP-aliases are an obsolete way to manage multiple IP-addresses/masks
+-per interface. Newer tools such as iproute2 support multiple
+-address/prefixes per interface, but aliases are still supported
+-for backwards compatibility.
+-
+-An alias is formed by adding a colon and a string when running ifconfig.
++IP-aliases are additional IP-addresses/masks hooked up to a base 
++interface by adding a colon and a string when running ifconfig. 
+ This string is usually numeric, but this is not a must.
++IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking) 
++is configured in the kernel.
++
++
+ o Alias creation.
+   Alias creation is done by 'magic' interface naming: eg. to create a
+   200.1.1.1 alias for eth0 ...
+@@ -38,3 +38,16 @@
+   If the base device is shut down the added aliases will be deleted 
+   too.
++
++
++Contact
++-------
++Please finger or e-mail me:
++   Juan Jose Ciarlante <jjciarla@raiz.uncu.edu.ar>
++
++Updated by Erik Schoenfelder <schoenfr@gaertner.DE>
++
++; local variables:
++; mode: indented-text
++; mode: auto-fill
++; end:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/networking/ipv6.txt linux-2.6.29-rc3.owrt/Documentation/networking/ipv6.txt
+--- linux-2.6.29.owrt/Documentation/networking/ipv6.txt        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/networking/ipv6.txt    1970-01-01 01:00:00.000000000 +0100
+@@ -1,35 +0,0 @@
+-
+-Options for the ipv6 module are supplied as parameters at load time.
+-
+-Module options may be given as command line arguments to the insmod
+-or modprobe command, but are usually specified in either the
+-/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+-distro-specific configuration file.
+-
+-The available ipv6 module parameters are listed below.  If a parameter
+-is not specified the default value is used.
+-
+-The parameters are as follows:
+-
+-disable
+-
+-      Specifies whether to load the IPv6 module, but disable all
+-      its functionality.  This might be used when another module
+-      has a dependency on the IPv6 module being loaded, but no
+-      IPv6 addresses or operations are desired.
+-
+-      The possible values and their effects are:
+-
+-      0
+-              IPv6 is enabled.
+-
+-              This is the default value.
+-
+-      1
+-              IPv6 is disabled.
+-
+-              No IPv6 addresses will be added to interfaces, and
+-              it will not be possible to open an IPv6 socket.
+-
+-              A reboot is required to enable IPv6.
+-
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/PCI/PCIEBUS-HOWTO.txt linux-2.6.29-rc3.owrt/Documentation/PCI/PCIEBUS-HOWTO.txt
+--- linux-2.6.29.owrt/Documentation/PCI/PCIEBUS-HOWTO.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/PCI/PCIEBUS-HOWTO.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -93,7 +93,7 @@
+ int pcie_port_service_register(struct pcie_port_service_driver *new)
+-This API replaces the Linux Driver Model's pci_register_driver API. A
++This API replaces the Linux Driver Model's pci_module_init API. A
+ service driver should always calls pcie_port_service_register at
+ module init. Note that after service driver being loaded, calls
+ such as pci_enable_device(dev) and pci_set_master(dev) are no longer
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt linux-2.6.29-rc3.owrt/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+--- linux-2.6.29.owrt/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt   1970-01-01 01:00:00.000000000 +0100
+@@ -1,180 +0,0 @@
+-MPC5200 Device Tree Bindings
+-----------------------------
+-
+-(c) 2006-2009 Secret Lab Technologies Ltd
+-Grant Likely <grant.likely@secretlab.ca>
+-
+-Naming conventions
+-------------------
+-For mpc5200 on-chip devices, the format for each compatible value is
+-<chip>-<device>[-<mode>].  The OS should be able to match a device driver
+-to the device based solely on the compatible value.  If two drivers
+-match on the compatible list; the 'most compatible' driver should be
+-selected.
+-
+-The split between the MPC5200 and the MPC5200B leaves a bit of a
+-conundrum.  How should the compatible property be set up to provide
+-maximum compatibility information; but still accurately describe the
+-chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
+-originally appeared on the MPC5200.  Since they didn't exist anywhere
+-else; the 5200 compatible properties will contain only one item;
+-"fsl,mpc5200-<device>".
+-
+-The 5200B is almost the same as the 5200, but not quite.  It fixes
+-silicon bugs and it adds a small number of enhancements.  Most of the
+-devices either provide exactly the same interface as on the 5200.  A few
+-devices have extra functions but still have a backwards compatible mode.
+-To express this information as completely as possible, 5200B device trees
+-should have two items in the compatible list:
+-      compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+-
+-It is *strongly* recommended that 5200B device trees follow this convention
+-(instead of only listing the base mpc5200 item).
+-
+-ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+-    ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+-
+-Modal devices, like PSCs, also append the configured function to the
+-end of the compatible field.  ie. A PSC in i2s mode would specify
+-"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s".  This convention is chosen to
+-avoid naming conflicts with non-psc devices providing the same
+-function.  For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+-the mpc5200 simple spi device and a PSC spi mode respectively.
+-
+-At the time of writing, exact chip may be either 'fsl,mpc5200' or
+-'fsl,mpc5200b'.
+-
+-The soc node
+-------------
+-This node describes the on chip SOC peripherals.  Every mpc5200 based
+-board will have this node, and as such there is a common naming
+-convention for SOC devices.
+-
+-Required properties:
+-name                  description
+-----                  -----------
+-ranges                        Memory range of the internal memory mapped registers.
+-                      Should be <0 [baseaddr] 0xc000>
+-reg                   Should be <[baseaddr] 0x100>
+-compatible            mpc5200: "fsl,mpc5200-immr"
+-                      mpc5200b: "fsl,mpc5200b-immr"
+-system-frequency      'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+-                      clocks are derived from the fsystem clock.
+-bus-frequency         IPB bus frequency in Hz.  Clock rate
+-                      used by most of the soc devices.
+-
+-soc child nodes
+----------------
+-Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+-
+-Note: The tables below show the value for the mpc5200.  A mpc5200b device
+-tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+-
+-Required soc5200 child nodes:
+-name                          compatible              Description
+-----                          ----------              -----------
+-cdm@<addr>                    fsl,mpc5200-cdm         Clock Distribution
+-interrupt-controller@<addr>   fsl,mpc5200-pic         need an interrupt
+-                                                      controller to boot
+-bestcomm@<addr>                       fsl,mpc5200-bestcomm    Bestcomm DMA controller
+-
+-Recommended soc5200 child nodes; populate as needed for your board
+-name          compatible              Description
+-----          ----------              -----------
+-timer@<addr>  fsl,mpc5200-gpt          General purpose timers
+-gpio@<addr>   fsl,mpc5200-gpio         MPC5200 simple gpio controller
+-gpio@<addr>   fsl,mpc5200-gpio-wkup    MPC5200 wakeup gpio controller
+-rtc@<addr>    fsl,mpc5200-rtc          Real time clock
+-mscan@<addr>  fsl,mpc5200-mscan        CAN bus controller
+-pci@<addr>    fsl,mpc5200-pci          PCI bridge
+-serial@<addr> fsl,mpc5200-psc-uart     PSC in serial mode
+-i2s@<addr>    fsl,mpc5200-psc-i2s      PSC in i2s mode
+-ac97@<addr>   fsl,mpc5200-psc-ac97     PSC in ac97 mode
+-spi@<addr>    fsl,mpc5200-psc-spi      PSC in spi mode
+-irda@<addr>   fsl,mpc5200-psc-irda     PSC in IrDA mode
+-spi@<addr>    fsl,mpc5200-spi          MPC5200 spi device
+-ethernet@<addr>       fsl,mpc5200-fec          MPC5200 ethernet device
+-ata@<addr>    fsl,mpc5200-ata          IDE ATA interface
+-i2c@<addr>    fsl,mpc5200-i2c          I2C controller
+-usb@<addr>    fsl,mpc5200-ohci,ohci-be USB controller
+-xlb@<addr>    fsl,mpc5200-xlb          XLB arbitrator
+-
+-fsl,mpc5200-gpt nodes
+----------------------
+-On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
+-design supports the internal wdt, then the device node for GPT0 should
+-include the empty property 'fsl,has-wdt'.
+-
+-An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
+-add the following properties to the gpt node:
+-      gpio-controller;
+-      #gpio-cells = <2>;
+-When referencing the GPIO line from another node, the first cell must always
+-be zero and the second cell represents the gpio flags and described in the
+-gpio device tree binding.
+-
+-An mpc5200-gpt can be used as a single line edge sensitive interrupt
+-controller.  To do so, add the following properties to the gpt node:
+-      interrupt-controller;
+-      #interrupt-cells = <1>;
+-When referencing the IRQ line from another node, the cell represents the
+-sense mode; 1 for edge rising, 2 for edge falling.
+-
+-fsl,mpc5200-psc nodes
+----------------------
+-The PSCs should include a cell-index which is the index of the PSC in
+-hardware.  cell-index is used to determine which shared SoC registers to
+-use when setting up PSC clocking.  cell-index number starts at '0'.  ie:
+-      PSC1 has 'cell-index = <0>'
+-      PSC4 has 'cell-index = <3>'
+-
+-PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
+-i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+-compatible field.
+-
+-
+-fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+-------------------------------------------------
+-Each GPIO controller node should have the empty property gpio-controller and
+-#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+-according to the bit numbers in the GPIO control registers. The second cell
+-is for flags which is currently unused.
+-
+-fsl,mpc5200-fec nodes
+----------------------
+-The FEC node can specify one of the following properties to configure
+-the MII link:
+-- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+-                    mode instead of MII
+-- current-speed   - Specifies that the MII should be configured for a fixed
+-                    speed.  This property should contain two cells.  The
+-                    first cell specifies the speed in Mbps and the second
+-                    should be '0' for half duplex and '1' for full duplex
+-- phy-handle      - Contains a phandle to an Ethernet PHY.
+-
+-Interrupt controller (fsl,mpc5200-pic) node
+--------------------------------------------
+-The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
+-split reflects the layout of the PIC hardware itself, which groups
+-interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+-Bestcomm dma engine has it's own set of interrupt sources which are
+-cascaded off of peripheral interrupt 0, which the driver interprets as a
+-fourth group, SDMA.
+-
+-The interrupts property for device nodes using the mpc5200 pic consists
+-of three cells; <L1 L2 level>
+-
+-    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+-    L2 := interrupt number; directly mapped from the value in the
+-          "ICTL PerStat, MainStat, CritStat Encoded Register"
+-    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+-
+-For external IRQs, use the following interrupt property values (how to
+-specify external interrupts is a frequently asked question):
+-External interrupts:
+-      external irq0:  interrupts = <0 0 n>;
+-      external irq1:  interrupts = <1 1 n>;
+-      external irq2:  interrupts = <1 2 n>;
+-      external irq3:  interrupts = <1 3 n>;
+-'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+-
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/powerpc/mpc52xx-device-tree-bindings.txt linux-2.6.29-rc3.owrt/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+--- linux-2.6.29.owrt/Documentation/powerpc/mpc52xx-device-tree-bindings.txt   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/Documentation/powerpc/mpc52xx-device-tree-bindings.txt       2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,277 @@
++MPC5200 Device Tree Bindings
++----------------------------
++
++(c) 2006-2007 Secret Lab Technologies Ltd
++Grant Likely <grant.likely at secretlab.ca>
++
++********** DRAFT ***********
++* WARNING: Do not depend on the stability of these bindings just yet.
++* The MPC5200 device tree conventions are still in flux
++* Keep an eye on the linuxppc-dev mailing list for more details
++********** DRAFT ***********
++
++I - Introduction
++================
++Boards supported by the arch/powerpc architecture require device tree be
++passed by the boot loader to the kernel at boot time.  The device tree
++describes what devices are present on the board and how they are
++connected.  The device tree can either be passed as a binary blob (as
++described in Documentation/powerpc/booting-without-of.txt), or passed
++by Open Firmware (IEEE 1275) compatible firmware using an OF compatible
++client interface API.
++
++This document specifies the requirements on the device-tree for mpc5200
++based boards.  These requirements are above and beyond the details
++specified in either the Open Firmware spec or booting-without-of.txt
++
++All new mpc5200-based boards are expected to match this document.  In
++cases where this document is not sufficient to support a new board port,
++this document should be updated as part of adding the new board support.
++
++II - Philosophy
++===============
++The core of this document is naming convention.  The whole point of
++defining this convention is to reduce or eliminate the number of
++special cases required to support a 5200 board.  If all 5200 boards
++follow the same convention, then generic 5200 support code will work
++rather than coding special cases for each new board.
++
++This section tries to capture the thought process behind why the naming
++convention is what it is.
++
++1.  names
++---------
++There is strong convention/requirements already established for children
++of the root node.  'cpus' describes the processor cores, 'memory'
++describes memory, and 'chosen' provides boot configuration.  Other nodes
++are added to describe devices attached to the processor local bus.
++
++Following convention already established with other system-on-chip
++processors, 5200 device trees should use the name 'soc5200' for the
++parent node of on chip devices, and the root node should be its parent.
++
++Child nodes are typically named after the configured function.  ie.
++the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'.
++
++2. device_type property
++-----------------------
++similar to the node name convention above; the device_type reflects the
++configured function of a device.  ie. 'serial' for a uart and 'spi' for
++an spi controller.  However, while node names *should* reflect the
++configured function, device_type *must* match the configured function
++exactly.
++
++3. compatible property
++----------------------
++Since device_type isn't enough to match devices to drivers, there also
++needs to be a naming convention for the compatible property.  Compatible
++is an list of device descriptions sorted from specific to generic.  For
++the mpc5200, the required format for each compatible value is
++<chip>-<device>[-<mode>].  The OS should be able to match a device driver
++to the device based solely on the compatible value.  If two drivers
++match on the compatible list; the 'most compatible' driver should be
++selected.
++
++The split between the MPC5200 and the MPC5200B leaves a bit of a
++conundrum.  How should the compatible property be set up to provide
++maximum compatibility information; but still accurately describe the
++chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
++originally appeared on the MPC5200.  Since they didn't exist anywhere
++else; the 5200 compatible properties will contain only one item;
++"mpc5200-<device>".
++
++The 5200B is almost the same as the 5200, but not quite.  It fixes
++silicon bugs and it adds a small number of enhancements.  Most of the
++devices either provide exactly the same interface as on the 5200.  A few
++devices have extra functions but still have a backwards compatible mode.
++To express this information as completely as possible, 5200B device trees
++should have two items in the compatible list;
++"mpc5200b-<device>\0mpc5200-<device>".  It is *strongly* recommended
++that 5200B device trees follow this convention (instead of only listing
++the base mpc5200 item).
++
++If another chip appear on the market with one of the mpc5200 SoC
++devices, then the compatible list should include mpc5200-<device>.
++
++ie. ethernet on mpc5200: compatible = "mpc5200-ethernet"
++    ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet"
++
++Modal devices, like PSCs, also append the configured function to the
++end of the compatible field.  ie. A PSC in i2s mode would specify
++"mpc5200-psc-i2s", not "mpc5200-i2s".  This convention is chosen to
++avoid naming conflicts with non-psc devices providing the same
++function.  For example, "mpc5200-spi" and "mpc5200-psc-spi" describe
++the mpc5200 simple spi device and a PSC spi mode respectively.
++
++If the soc device is more generic and present on other SOCs, the
++compatible property can specify the more generic device type also.
++
++ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan";
++
++At the time of writing, exact chip may be either 'mpc5200' or
++'mpc5200b'.
++
++Device drivers should always try to match as generically as possible.
++
++III - Structure
++===============
++The device tree for an mpc5200 board follows the structure defined in
++booting-without-of.txt with the following additional notes:
++
++0) the root node
++----------------
++Typical root description node; see booting-without-of
++
++1) The cpus node
++----------------
++The cpus node follows the basic layout described in booting-without-of.
++The bus-frequency property holds the XLB bus frequency
++The clock-frequency property holds the core frequency
++
++2) The memory node
++------------------
++Typical memory description node; see booting-without-of.
++
++3) The soc5200 node
++-------------------
++This node describes the on chip SOC peripherals.  Every mpc5200 based
++board will have this node, and as such there is a common naming
++convention for SOC devices.
++
++Required properties:
++name                  type            description
++----                  ----            -----------
++device_type           string          must be "soc"
++ranges                        int             should be <0 baseaddr baseaddr+10000>
++reg                   int             must be <baseaddr 10000>
++compatible            string          mpc5200: "mpc5200-soc"
++                                      mpc5200b: "mpc5200b-soc\0mpc5200-soc"
++system-frequency      int             Fsystem frequency; source of all
++                                      other clocks.
++bus-frequency         int             IPB bus frequency in HZ.  Clock rate
++                                      used by most of the soc devices.
++#interrupt-cells      int             must be <3>.
++
++Recommended properties:
++name                  type            description
++----                  ----            -----------
++model                 string          Exact model of the chip;
++                                      ie: model="fsl,mpc5200"
++revision              string          Silicon revision of chip
++                                      ie: revision="M08A"
++
++The 'model' and 'revision' properties are *strongly* recommended.  Having
++them presence acts as a bit of a safety net for working around as yet
++undiscovered bugs on one version of silicon.  For example, device drivers
++can use the model and revision properties to decide if a bug fix should
++be turned on.
++
++4) soc5200 child nodes
++----------------------
++Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
++
++Note: The tables below show the value for the mpc5200.  A mpc5200b device
++tree should use the "mpc5200b-<device>\0mpc5200-<device> form.
++
++Required soc5200 child nodes:
++name          device_type             compatible      Description
++----          -----------             ----------      -----------
++cdm@<addr>    cdm                     mpc5200-cmd     Clock Distribution
++pic@<addr>    interrupt-controller    mpc5200-pic     need an interrupt
++                                                      controller to boot
++bestcomm@<addr>       dma-controller          mpc5200-bestcomm 5200 pic also requires
++                                                       the bestcomm device
++
++Recommended soc5200 child nodes; populate as needed for your board
++name          device_type     compatible        Description
++----          -----------     ----------        -----------
++gpt@<addr>    gpt             fsl,mpc5200-gpt   General purpose timers
++gpt@<addr>    gpt             fsl,mpc5200-gpt-gpio    General purpose
++                                                      timers in GPIO mode
++gpio@<addr>                   fsl,mpc5200-gpio        MPC5200 simple gpio
++                                                      controller
++gpio@<addr>                   fsl,mpc5200-gpio-wkup   MPC5200 wakeup gpio
++                                                      controller
++rtc@<addr>    rtc             mpc5200-rtc       Real time clock
++mscan@<addr>  mscan           mpc5200-mscan     CAN bus controller
++pci@<addr>    pci             mpc5200-pci       PCI bridge
++serial@<addr> serial          mpc5200-psc-uart  PSC in serial mode
++i2s@<addr>    sound           mpc5200-psc-i2s   PSC in i2s mode
++ac97@<addr>   sound           mpc5200-psc-ac97  PSC in ac97 mode
++spi@<addr>    spi             mpc5200-psc-spi   PSC in spi mode
++irda@<addr>   irda            mpc5200-psc-irda  PSC in IrDA mode
++spi@<addr>    spi             mpc5200-spi       MPC5200 spi device
++ethernet@<addr>       network         mpc5200-fec       MPC5200 ethernet device
++ata@<addr>    ata             mpc5200-ata       IDE ATA interface
++i2c@<addr>    i2c             mpc5200-i2c       I2C controller
++usb@<addr>    usb-ohci-be     mpc5200-ohci,ohci-be    USB controller
++xlb@<addr>    xlb             mpc5200-xlb       XLB arbitrator
++
++Important child node properties
++name          type            description
++----          ----            -----------
++cell-index    int             When multiple devices are present, is the
++                              index of the device in the hardware (ie. There
++                              are 6 PSC on the 5200 numbered PSC1 to PSC6)
++                                  PSC1 has 'cell-index = <0>'
++                                  PSC4 has 'cell-index = <3>'
++
++5) General Purpose Timer nodes (child of soc5200 node)
++On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
++design supports the internal wdt, then the device node for GPT0 should
++include the empty property 'fsl,has-wdt'.
++
++6) PSC nodes (child of soc5200 node)
++PSC nodes can define the optional 'port-number' property to force assignment
++order of serial ports.  For example, PSC5 might be physically connected to
++the port labeled 'COM1' and PSC1 wired to 'COM1'.  In this case, PSC5 would
++have a "port-number = <0>" property, and PSC1 would have "port-number = <1>".
++
++PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
++i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
++compatible field.
++
++7) GPIO controller nodes
++Each GPIO controller node should have the empty property gpio-controller and
++#gpio-cells set to 2. First cell is the GPIO number which is interpreted
++according to the bit numbers in the GPIO control registers. The second cell
++is for flags which is currently unsused.
++
++8) FEC nodes
++The FEC node can specify one of the following properties to configure
++the MII link:
++"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
++                    mode instead of MII
++"current-speed"   - Specifies that the MII should be configured for a fixed
++                    speed.  This property should contain two cells.  The
++                    first cell specifies the speed in Mbps and the second
++                    should be '0' for half duplex and '1' for full duplex
++"phy-handle"      - Contains a phandle to an Ethernet PHY.
++
++IV - Extra Notes
++================
++
++1. Interrupt mapping
++--------------------
++The mpc5200 pic driver splits hardware IRQ numbers into two levels.  The
++split reflects the layout of the PIC hardware itself, which groups
++interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
++Bestcomm dma engine has it's own set of interrupt sources which are
++cascaded off of peripheral interrupt 0, which the driver interprets as a
++fourth group, SDMA.
++
++The interrupts property for device nodes using the mpc5200 pic consists
++of three cells; <L1 L2 level>
++
++    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
++    L2 := interrupt number; directly mapped from the value in the
++          "ICTL PerStat, MainStat, CritStat Encoded Register"
++    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
++
++2. Shared registers
++-------------------
++Some SoC devices share registers between them.  ie. the i2c devices use
++a single clock control register, and almost all device are affected by
++the port_config register.  Devices which need to manipulate shared regs
++should look to the parent SoC node.  The soc node is responsible
++for arbitrating all shared register access.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/RCU/checklist.txt linux-2.6.29-rc3.owrt/Documentation/RCU/checklist.txt
+--- linux-2.6.29.owrt/Documentation/RCU/checklist.txt  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/RCU/checklist.txt      2009-05-10 23:48:28.000000000 +0200
+@@ -298,15 +298,3 @@
+       Note that, rcu_assign_pointer() and rcu_dereference() relate to
+       SRCU just as they do to other forms of RCU.
+-
+-15.   The whole point of call_rcu(), synchronize_rcu(), and friends
+-      is to wait until all pre-existing readers have finished before
+-      carrying out some otherwise-destructive operation.  It is
+-      therefore critically important to -first- remove any path
+-      that readers can follow that could be affected by the
+-      destructive operation, and -only- -then- invoke call_rcu(),
+-      synchronize_rcu(), or friends.
+-
+-      Because these primitives only wait for pre-existing readers,
+-      it is the caller's responsibility to guarantee safety to
+-      any subsequent readers.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/scsi/cxgb3i.txt linux-2.6.29-rc3.owrt/Documentation/scsi/cxgb3i.txt
+--- linux-2.6.29.owrt/Documentation/scsi/cxgb3i.txt    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/scsi/cxgb3i.txt        2009-05-10 23:48:28.000000000 +0200
+@@ -4,7 +4,7 @@
+ ============
+ The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
+-series of products) support iSCSI acceleration and iSCSI Direct Data Placement
++series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+ (DDP) where the hardware handles the expensive byte touching operations, such
+ as CRC computation and verification, and direct DMA to the final host memory
+ destination:
+@@ -31,9 +31,9 @@
+         the TCP segments onto the wire. It handles TCP retransmission if
+         needed.
+-        On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
++        On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+         segments, separating the header and data, calculating and verifying
+-        the digests, then forwarding the header to the host. The payload data,
++        the digests, then forwards the header to the host. The payload data,
+         if possible, will be directly placed into the pre-posted host DDP
+         buffer. Otherwise, the payload data will be sent to the host too.
+@@ -68,8 +68,9 @@
+       sure the ip address is unique in the network.
+ 3. edit /etc/iscsi/iscsid.conf
+-   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+-   replace with a value no bigger than 15360 (for example 8192):
++   The default setting for MaxRecvDataSegmentLength (131072) is too big,
++   replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
++   bigger than 15360 (for example 8192):
+       node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/tracers/mmiotrace.txt linux-2.6.29-rc3.owrt/Documentation/tracers/mmiotrace.txt
+--- linux-2.6.29.owrt/Documentation/tracers/mmiotrace.txt      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/tracers/mmiotrace.txt  2009-05-10 23:48:28.000000000 +0200
+@@ -78,10 +78,12 @@
+ events were lost, the trace is incomplete. You should enlarge the buffers and
+ try again. Buffers are enlarged by first seeing how large the current buffers
+ are:
+-$ cat /debug/tracing/buffer_size_kb
++$ cat /debug/tracing/trace_entries
+ gives you a number. Approximately double this number and write it back, for
+ instance:
+-$ echo 128000 > /debug/tracing/buffer_size_kb
++$ echo 0 > /debug/tracing/tracing_enabled
++$ echo 128000 > /debug/tracing/trace_entries
++$ echo 1 > /debug/tracing/tracing_enabled
+ Then start again from the top.
+ If you are doing a trace for a driver project, e.g. Nouveau, you should also
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/usb/dma.txt linux-2.6.29-rc3.owrt/Documentation/usb/dma.txt
+--- linux-2.6.29.owrt/Documentation/usb/dma.txt        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/usb/dma.txt    2009-05-10 23:48:28.000000000 +0200
+@@ -6,9 +6,8 @@
+ API OVERVIEW
+ The big picture is that USB drivers can continue to ignore most DMA issues,
+-though they still must provide DMA-ready buffers (see
+-Documentation/PCI/PCI-DMA-mapping.txt).  That's how they've worked through
+-the 2.4 (and earlier) kernels.
++though they still must provide DMA-ready buffers (see DMA-mapping.txt).
++That's how they've worked through the 2.4 (and earlier) kernels.
+ OR:  they can now be DMA-aware.
+@@ -63,8 +62,8 @@
+   force a consistent memory access ordering by using memory barriers.  It's
+   not using a streaming DMA mapping, so it's good for small transfers on
+   systems where the I/O would otherwise thrash an IOMMU mapping.  (See
+-  Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and
+-  "streaming" DMA mappings.)
++  Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming"
++  DMA mappings.)
+   Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
+   space-efficient.
+@@ -94,7 +93,7 @@
+ Existing buffers aren't usable for DMA without first being mapped into the
+ DMA address space of the device.  However, most buffers passed to your
+ driver can safely be used with such DMA mapping.  (See the first section
+-of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
++of DMA-mapping.txt, titled "What memory is DMA-able?")
+ - When you're using scatterlists, you can map everything at once.  On some
+   systems, this kicks in an IOMMU and turns the scatterlists into single
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Documentation/video4linux/v4lgrab.c linux-2.6.29-rc3.owrt/Documentation/video4linux/v4lgrab.c
+--- linux-2.6.29.owrt/Documentation/video4linux/v4lgrab.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Documentation/video4linux/v4lgrab.c  2009-05-10 23:48:28.000000000 +0200
+@@ -4,21 +4,12 @@
+  *
+  *    Compile with:
+  *            gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
+- *    Use as:
+- *            v4lgrab >image.ppm
++ *      Use as:
++ *              v4lgrab >image.ppm
+  *
+  *    Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
+- *    Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
+- *    with minor modifications (Dave Forrest, drf5n@virginia.edu).
+- *
+- *
+- *    For some cameras you may need to pre-load libv4l to perform
+- *    the necessary decompression, e.g.:
+- *
+- *    export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so
+- *    ./v4lgrab >image.ppm
+- *
+- *    see http://hansdegoede.livejournal.com/3636.html for details.
++ *      Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
++ *      with minor modifications (Dave Forrest, drf5n@virginia.edu).
+  *
+  */
+@@ -33,7 +24,7 @@
+ #include <linux/types.h>
+ #include <linux/videodev.h>
+-#define VIDEO_DEV "/dev/video0"
++#define FILE "/dev/video0"
+ /* Stole this from tvset.c */
+@@ -99,7 +90,7 @@
+ int main(int argc, char ** argv)
+ {
+-  int fd = open(VIDEO_DEV, O_RDONLY), f;
++  int fd = open(FILE, O_RDONLY), f;
+   struct video_capability cap;
+   struct video_window win;
+   struct video_picture vpic;
+@@ -109,13 +100,13 @@
+   unsigned int i, src_depth;
+   if (fd < 0) {
+-    perror(VIDEO_DEV);
++    perror(FILE);
+     exit(1);
+   }
+   if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
+     perror("VIDIOGCAP");
+-    fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n");
++    fprintf(stderr, "(" FILE " not a video4linux device?)\n");
+     close(fd);
+     exit(1);
+   }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/acpica/tbutils.c linux-2.6.29-rc3.owrt/drivers/acpi/acpica/tbutils.c
+--- linux-2.6.29.owrt/drivers/acpi/acpica/tbutils.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/acpica/tbutils.c        2009-05-10 23:48:28.000000000 +0200
+@@ -538,9 +538,10 @@
+                       if (ACPI_FAILURE(status)) {
+                               ACPI_WARNING((AE_INFO,
+                                             "Truncating %u table entries!",
+-                                            (unsigned) (table_count -
+-                                             (acpi_gbl_root_table_list.
+-                                             count - 2))));
++                                            (unsigned)
++                                            (acpi_gbl_root_table_list.size -
++                                             acpi_gbl_root_table_list.
++                                             count)));
+                               break;
+                       }
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/acpica/uteval.c linux-2.6.29-rc3.owrt/drivers/acpi/acpica/uteval.c
+--- linux-2.6.29.owrt/drivers/acpi/acpica/uteval.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/acpica/uteval.c 2009-05-10 23:48:28.000000000 +0200
+@@ -116,9 +116,9 @@
+               return_ACPI_STATUS(AE_NO_MEMORY);
+       }
+-      /* Default return value is 0, NOT-SUPPORTED */
++      /* Default return value is SUPPORTED */
+-      return_desc->integer.value = 0;
++      return_desc->integer.value = ACPI_UINT32_MAX;
+       walk_state->return_desc = return_desc;
+       /* Compare input string to static table of supported interfaces */
+@@ -127,8 +127,10 @@
+               if (!ACPI_STRCMP
+                   (string_desc->string.pointer,
+                    acpi_interfaces_supported[i])) {
+-                      return_desc->integer.value = ACPI_UINT32_MAX;
+-                      goto done;
++
++                      /* The interface is supported */
++
++                      return_ACPI_STATUS(AE_OK);
+               }
+       }
+@@ -139,14 +141,15 @@
+        */
+       status = acpi_os_validate_interface(string_desc->string.pointer);
+       if (ACPI_SUCCESS(status)) {
+-              return_desc->integer.value = ACPI_UINT32_MAX;
++
++              /* The interface is supported */
++
++              return_ACPI_STATUS(AE_OK);
+       }
+-done:
+-      ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, "ACPI: BIOS _OSI(%s) %ssupported\n",
+-              string_desc->string.pointer,
+-              return_desc->integer.value == 0 ? "not-" : ""));
++      /* The interface is not supported */
++      return_desc->integer.value = 0;
+       return_ACPI_STATUS(AE_OK);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/battery.c linux-2.6.29-rc3.owrt/drivers/acpi/battery.c
+--- linux-2.6.29.owrt/drivers/acpi/battery.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/battery.c       2009-05-10 23:48:28.000000000 +0200
+@@ -138,29 +138,6 @@
+ static int acpi_battery_get_state(struct acpi_battery *battery);
+-static int acpi_battery_is_charged(struct acpi_battery *battery)
+-{
+-      /* either charging or discharging */
+-      if (battery->state != 0)
+-              return 0;
+-
+-      /* battery not reporting charge */
+-      if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN ||
+-          battery->capacity_now == 0)
+-              return 0;
+-
+-      /* good batteries update full_charge as the batteries degrade */
+-      if (battery->full_charge_capacity == battery->capacity_now)
+-              return 1;
+-
+-      /* fallback to using design values for broken batteries */
+-      if (battery->design_capacity == battery->capacity_now)
+-              return 1;
+-
+-      /* we don't do any sort of metric based on percentages */
+-      return 0;
+-}
+-
+ static int acpi_battery_get_property(struct power_supply *psy,
+                                    enum power_supply_property psp,
+                                    union power_supply_propval *val)
+@@ -178,7 +155,7 @@
+                       val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+               else if (battery->state & 0x02)
+                       val->intval = POWER_SUPPLY_STATUS_CHARGING;
+-              else if (acpi_battery_is_charged(battery))
++              else if (battery->state == 0)
+                       val->intval = POWER_SUPPLY_STATUS_FULL;
+               else
+                       val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/bus.c linux-2.6.29-rc3.owrt/drivers/acpi/bus.c
+--- linux-2.6.29.owrt/drivers/acpi/bus.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/bus.c   2009-05-10 23:48:28.000000000 +0200
+@@ -758,7 +758,8 @@
+       acpi_status status = AE_OK;
+       extern acpi_status acpi_os_initialize1(void);
+-      acpi_os_initialize1();
++
++      status = acpi_os_initialize1();
+       status =
+           acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
+@@ -768,6 +769,12 @@
+               goto error1;
+       }
++      if (ACPI_FAILURE(status)) {
++              printk(KERN_ERR PREFIX
++                     "Unable to initialize ACPI OS objects\n");
++              goto error1;
++      }
++
+       /*
+        * ACPI 2.0 requires the EC driver to be loaded and work before
+        * the EC device is found in the namespace (i.e. before acpi_initialize_objects()
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/container.c linux-2.6.29-rc3.owrt/drivers/acpi/container.c
+--- linux-2.6.29.owrt/drivers/acpi/container.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/container.c     2009-05-10 23:48:28.000000000 +0200
+@@ -163,7 +163,7 @@
+       case ACPI_NOTIFY_BUS_CHECK:
+               /* Fall through */
+       case ACPI_NOTIFY_DEVICE_CHECK:
+-              printk(KERN_WARNING "Container driver received %s event\n",
++              printk("Container driver received %s event\n",
+                      (type == ACPI_NOTIFY_BUS_CHECK) ?
+                      "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
+               status = acpi_bus_get_device(handle, &device);
+@@ -174,8 +174,7 @@
+                                       kobject_uevent(&device->dev.kobj,
+                                                      KOBJ_ONLINE);
+                               else
+-                                      printk(KERN_WARNING
+-                                             "Failed to add container\n");
++                                      printk("Failed to add container\n");
+                       }
+               } else {
+                       if (ACPI_SUCCESS(status)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/dock.c linux-2.6.29-rc3.owrt/drivers/acpi/dock.c
+--- linux-2.6.29.owrt/drivers/acpi/dock.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/dock.c  2009-05-10 23:48:28.000000000 +0200
+@@ -855,14 +855,10 @@
+ static ssize_t show_docked(struct device *dev,
+                          struct device_attribute *attr, char *buf)
+ {
+-      struct acpi_device *tmp;
+-
+       struct dock_station *dock_station = *((struct dock_station **)
+               dev->platform_data);
++      return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station));
+-      if (ACPI_SUCCESS(acpi_bus_get_device(dock_station->handle, &tmp)))
+-              return snprintf(buf, PAGE_SIZE, "1\n");
+-      return snprintf(buf, PAGE_SIZE, "0\n");
+ }
+ static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
+@@ -988,7 +984,7 @@
+       ret = device_create_file(&dock_device->dev, &dev_attr_docked);
+       if (ret) {
+-              printk(KERN_ERR "Error %d adding sysfs file\n", ret);
++              printk("Error %d adding sysfs file\n", ret);
+               platform_device_unregister(dock_device);
+               kfree(dock_station);
+               dock_station = NULL;
+@@ -996,7 +992,7 @@
+       }
+       ret = device_create_file(&dock_device->dev, &dev_attr_undock);
+       if (ret) {
+-              printk(KERN_ERR "Error %d adding sysfs file\n", ret);
++              printk("Error %d adding sysfs file\n", ret);
+               device_remove_file(&dock_device->dev, &dev_attr_docked);
+               platform_device_unregister(dock_device);
+               kfree(dock_station);
+@@ -1005,7 +1001,7 @@
+       }
+       ret = device_create_file(&dock_device->dev, &dev_attr_uid);
+       if (ret) {
+-              printk(KERN_ERR "Error %d adding sysfs file\n", ret);
++              printk("Error %d adding sysfs file\n", ret);
+               device_remove_file(&dock_device->dev, &dev_attr_docked);
+               device_remove_file(&dock_device->dev, &dev_attr_undock);
+               platform_device_unregister(dock_device);
+@@ -1015,7 +1011,7 @@
+       }
+       ret = device_create_file(&dock_device->dev, &dev_attr_flags);
+       if (ret) {
+-              printk(KERN_ERR "Error %d adding sysfs file\n", ret);
++              printk("Error %d adding sysfs file\n", ret);
+               device_remove_file(&dock_device->dev, &dev_attr_docked);
+               device_remove_file(&dock_device->dev, &dev_attr_undock);
+               device_remove_file(&dock_device->dev, &dev_attr_uid);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/ec.c linux-2.6.29-rc3.owrt/drivers/acpi/ec.c
+--- linux-2.6.29.owrt/drivers/acpi/ec.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/ec.c    2009-05-10 23:48:28.000000000 +0200
+@@ -120,8 +120,6 @@
+       spinlock_t curr_lock;
+ } *boot_ec, *first_ec;
+-static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+-
+ /* --------------------------------------------------------------------------
+                              Transaction Management
+    -------------------------------------------------------------------------- */
+@@ -261,8 +259,6 @@
+               clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+               acpi_disable_gpe(NULL, ec->gpe);
+       }
+-      if (EC_FLAGS_MSI)
+-              udelay(ACPI_EC_DELAY);
+       /* start transaction */
+       spin_lock_irqsave(&ec->curr_lock, tmp);
+       /* following two actions should be kept atomic */
+@@ -971,11 +967,6 @@
+       /*
+        * Generate a boot ec context
+        */
+-      if (dmi_name_in_vendors("Micro-Star") ||
+-          dmi_name_in_vendors("Notebook")) {
+-              pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
+-              EC_FLAGS_MSI = 1;
+-      }
+       status = acpi_get_table(ACPI_SIG_ECDT, 1,
+                               (struct acpi_table_header **)&ecdt_ptr);
+       if (ACPI_SUCCESS(status)) {
+@@ -991,7 +982,7 @@
+               saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+               if (!saved_ec)
+                       return -ENOMEM;
+-              memcpy(saved_ec, boot_ec, sizeof(*saved_ec));
++              memcpy(&saved_ec, boot_ec, sizeof(saved_ec));
+       /* fall through */
+       }
+       /* This workaround is needed only on some broken machines,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/glue.c linux-2.6.29-rc3.owrt/drivers/acpi/glue.c
+--- linux-2.6.29.owrt/drivers/acpi/glue.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/glue.c  2009-05-10 23:48:28.000000000 +0200
+@@ -255,12 +255,12 @@
+       }
+       type = acpi_get_bus_type(dev->bus);
+       if (!type) {
+-              DBG("No ACPI bus support for %s\n", dev_name(dev));
++              DBG("No ACPI bus support for %s\n", dev->bus_id);
+               ret = -EINVAL;
+               goto end;
+       }
+       if ((ret = type->find_device(dev, &handle)) != 0)
+-              DBG("Can't get handler for %s\n", dev_name(dev));
++              DBG("Can't get handler for %s\n", dev->bus_id);
+       end:
+       if (!ret)
+               acpi_bind_one(dev, handle);
+@@ -271,10 +271,10 @@
+               acpi_get_name(dev->archdata.acpi_handle,
+                             ACPI_FULL_PATHNAME, &buffer);
+-              DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
++              DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer);
+               kfree(buffer.pointer);
+       } else
+-              DBG("Device %s -> No ACPI support\n", dev_name(dev));
++              DBG("Device %s -> No ACPI support\n", dev->bus_id);
+ #endif
+       return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/Kconfig linux-2.6.29-rc3.owrt/drivers/acpi/Kconfig
+--- linux-2.6.29.owrt/drivers/acpi/Kconfig     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/Kconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -9,7 +9,6 @@
+       depends on PCI
+       depends on PM
+       select PNP
+-      select CPU_IDLE
+       default y
+       ---help---
+         Advanced Configuration and Power Interface (ACPI) support for 
+@@ -254,6 +253,13 @@
+         help you correlate PCI bus addresses with the physical geography
+         of your slots. If you are unsure, say N.
++config ACPI_SYSTEM
++      bool
++      default y
++      help
++        This driver will enable your system to shut down using ACPI, and
++        dump your ACPI DSDT table using /proc/acpi/dsdt.
++
+ config X86_PM_TIMER
+       bool "Power Management Timer Support" if EMBEDDED
+       depends on X86
+@@ -281,7 +287,7 @@
+         support physical cpu/memory hot-plug.
+         If one selects "m", this driver can be loaded with
+-        "modprobe container".
++        "modprobe acpi_container".
+ config ACPI_HOTPLUG_MEMORY
+       tristate "Memory Hotplug"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/Makefile linux-2.6.29-rc3.owrt/drivers/acpi/Makefile
+--- linux-2.6.29.owrt/drivers/acpi/Makefile    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/Makefile        2009-05-10 23:48:28.000000000 +0200
+@@ -52,7 +52,7 @@
+ obj-$(CONFIG_ACPI_CONTAINER)  += container.o
+ obj-$(CONFIG_ACPI_THERMAL)    += thermal.o
+ obj-y                         += power.o
+-obj-y                         += system.o event.o
++obj-$(CONFIG_ACPI_SYSTEM)     += system.o event.o
+ obj-$(CONFIG_ACPI_DEBUG)      += debug.o
+ obj-$(CONFIG_ACPI_NUMA)               += numa.o
+ obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)     += acpi_memhotplug.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/numa.c linux-2.6.29-rc3.owrt/drivers/acpi/numa.c
+--- linux-2.6.29.owrt/drivers/acpi/numa.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/numa.c  2009-05-10 23:48:28.000000000 +0200
+@@ -277,7 +277,7 @@
+       int pxm, node = -1;
+       pxm = acpi_get_pxm(handle);
+-      if (pxm >= 0 && pxm < MAX_PXM_DOMAINS)
++      if (pxm >= 0)
+               node = acpi_map_pxm_to_node(pxm);
+       return node;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/osl.c linux-2.6.29-rc3.owrt/drivers/acpi/osl.c
+--- linux-2.6.29.owrt/drivers/acpi/osl.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/osl.c   2009-05-10 23:48:28.000000000 +0200
+@@ -228,10 +228,10 @@
+       if (acpi_in_debugger) {
+               kdb_printf("%s", buffer);
+       } else {
+-              printk(KERN_CONT "%s", buffer);
++              printk("%s", buffer);
+       }
+ #else
+-      printk(KERN_CONT "%s", buffer);
++      printk("%s", buffer);
+ #endif
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/pci_link.c linux-2.6.29-rc3.owrt/drivers/acpi/pci_link.c
+--- linux-2.6.29.owrt/drivers/acpi/pci_link.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/pci_link.c      2009-05-10 23:48:28.000000000 +0200
+@@ -593,7 +593,7 @@
+               return -ENODEV;
+       } else {
+               acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
+-              printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n",
++              printk(PREFIX "%s [%s] enabled at IRQ %d\n",
+                      acpi_device_name(link->device),
+                      acpi_device_bid(link->device), link->irq.active);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/processor_idle.c linux-2.6.29-rc3.owrt/drivers/acpi/processor_idle.c
+--- linux-2.6.29.owrt/drivers/acpi/processor_idle.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/processor_idle.c        2009-05-10 23:48:28.000000000 +0200
+@@ -66,17 +66,43 @@
+ #define ACPI_PROCESSOR_FILE_POWER     "power"
+ #define US_TO_PM_TIMER_TICKS(t)               ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
+ #define PM_TIMER_TICK_NS              (1000000000ULL/PM_TIMER_FREQUENCY)
++#ifndef CONFIG_CPU_IDLE
++#define C2_OVERHEAD                   4       /* 1us (3.579 ticks per us) */
++#define C3_OVERHEAD                   4       /* 1us (3.579 ticks per us) */
++static void (*pm_idle_save) (void) __read_mostly;
++#else
+ #define C2_OVERHEAD                   1       /* 1us */
+ #define C3_OVERHEAD                   1       /* 1us */
++#endif
+ #define PM_TIMER_TICKS_TO_US(p)               (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
+ static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
++#ifdef CONFIG_CPU_IDLE
+ module_param(max_cstate, uint, 0000);
++#else
++module_param(max_cstate, uint, 0644);
++#endif
+ static unsigned int nocst __read_mostly;
+ module_param(nocst, uint, 0000);
++#ifndef CONFIG_CPU_IDLE
++/*
++ * bm_history -- bit-mask with a bit per jiffy of bus-master activity
++ * 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
++ * 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms
++ * 100 HZ: 0x0000000F: 4 jiffies = 40ms
++ * reduce history for more aggressive entry into C3
++ */
++static unsigned int bm_history __read_mostly =
++    (HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
++module_param(bm_history, uint, 0644);
++
++static int acpi_processor_set_power_policy(struct acpi_processor *pr);
++
++#else /* CONFIG_CPU_IDLE */
+ static unsigned int latency_factor __read_mostly = 2;
+ module_param(latency_factor, uint, 0644);
++#endif
+ /*
+  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
+@@ -198,6 +224,71 @@
+       current_thread_info()->status |= TS_POLLING;
+ }
++#ifndef CONFIG_CPU_IDLE
++
++static void
++acpi_processor_power_activate(struct acpi_processor *pr,
++                            struct acpi_processor_cx *new)
++{
++      struct acpi_processor_cx *old;
++
++      if (!pr || !new)
++              return;
++
++      old = pr->power.state;
++
++      if (old)
++              old->promotion.count = 0;
++      new->demotion.count = 0;
++
++      /* Cleanup from old state. */
++      if (old) {
++              switch (old->type) {
++              case ACPI_STATE_C3:
++                      /* Disable bus master reload */
++                      if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
++                              acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
++                      break;
++              }
++      }
++
++      /* Prepare to use new state. */
++      switch (new->type) {
++      case ACPI_STATE_C3:
++              /* Enable bus master reload */
++              if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
++                      acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
++              break;
++      }
++
++      pr->power.state = new;
++
++      return;
++}
++
++static atomic_t c3_cpu_count;
++
++/* Common C-state entry for C2, C3, .. */
++static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
++{
++      /* Don't trace irqs off for idle */
++      stop_critical_timings();
++      if (cstate->entry_method == ACPI_CSTATE_FFH) {
++              /* Call into architectural FFH based C-state */
++              acpi_processor_ffh_cstate_enter(cstate);
++      } else {
++              int unused;
++              /* IO port based C-state */
++              inb(cstate->address);
++              /* Dummy wait op - must do something useless after P_LVL2 read
++                 because chipsets cannot guarantee that STPCLK# signal
++                 gets asserted in time to freeze execution properly. */
++              unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
++      }
++      start_critical_timings();
++}
++#endif /* !CONFIG_CPU_IDLE */
++
+ #ifdef ARCH_APICTIMER_STOPS_ON_C3
+ /*
+@@ -299,6 +390,421 @@
+ }
+ #endif
++#ifndef CONFIG_CPU_IDLE
++static void acpi_processor_idle(void)
++{
++      struct acpi_processor *pr = NULL;
++      struct acpi_processor_cx *cx = NULL;
++      struct acpi_processor_cx *next_state = NULL;
++      int sleep_ticks = 0;
++      u32 t1, t2 = 0;
++
++      /*
++       * Interrupts must be disabled during bus mastering calculations and
++       * for C2/C3 transitions.
++       */
++      local_irq_disable();
++
++      pr = __get_cpu_var(processors);
++      if (!pr) {
++              local_irq_enable();
++              return;
++      }
++
++      /*
++       * Check whether we truly need to go idle, or should
++       * reschedule:
++       */
++      if (unlikely(need_resched())) {
++              local_irq_enable();
++              return;
++      }
++
++      cx = pr->power.state;
++      if (!cx || acpi_idle_suspend) {
++              if (pm_idle_save) {
++                      pm_idle_save(); /* enables IRQs */
++              } else {
++                      acpi_safe_halt();
++                      local_irq_enable();
++              }
++
++              return;
++      }
++
++      /*
++       * Check BM Activity
++       * -----------------
++       * Check for bus mastering activity (if required), record, and check
++       * for demotion.
++       */
++      if (pr->flags.bm_check) {
++              u32 bm_status = 0;
++              unsigned long diff = jiffies - pr->power.bm_check_timestamp;
++
++              if (diff > 31)
++                      diff = 31;
++
++              pr->power.bm_activity <<= diff;
++
++              acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
++              if (bm_status) {
++                      pr->power.bm_activity |= 0x1;
++                      acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
++              }
++              /*
++               * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
++               * the true state of bus mastering activity; forcing us to
++               * manually check the BMIDEA bit of each IDE channel.
++               */
++              else if (errata.piix4.bmisx) {
++                      if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
++                          || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
++                              pr->power.bm_activity |= 0x1;
++              }
++
++              pr->power.bm_check_timestamp = jiffies;
++
++              /*
++               * If bus mastering is or was active this jiffy, demote
++               * to avoid a faulty transition.  Note that the processor
++               * won't enter a low-power state during this call (to this
++               * function) but should upon the next.
++               *
++               * TBD: A better policy might be to fallback to the demotion
++               *      state (use it for this quantum only) istead of
++               *      demoting -- and rely on duration as our sole demotion
++               *      qualification.  This may, however, introduce DMA
++               *      issues (e.g. floppy DMA transfer overrun/underrun).
++               */
++              if ((pr->power.bm_activity & 0x1) &&
++                  cx->demotion.threshold.bm) {
++                      local_irq_enable();
++                      next_state = cx->demotion.state;
++                      goto end;
++              }
++      }
++
++#ifdef CONFIG_HOTPLUG_CPU
++      /*
++       * Check for P_LVL2_UP flag before entering C2 and above on
++       * an SMP system. We do it here instead of doing it at _CST/P_LVL
++       * detection phase, to work cleanly with logical CPU hotplug.
++       */
++      if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
++          !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
++              cx = &pr->power.states[ACPI_STATE_C1];
++#endif
++
++      /*
++       * Sleep:
++       * ------
++       * Invoke the current Cx state to put the processor to sleep.
++       */
++      if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
++              current_thread_info()->status &= ~TS_POLLING;
++              /*
++               * TS_POLLING-cleared state must be visible before we
++               * test NEED_RESCHED:
++               */
++              smp_mb();
++              if (need_resched()) {
++                      current_thread_info()->status |= TS_POLLING;
++                      local_irq_enable();
++                      return;
++              }
++      }
++
++      switch (cx->type) {
++
++      case ACPI_STATE_C1:
++              /*
++               * Invoke C1.
++               * Use the appropriate idle routine, the one that would
++               * be used without acpi C-states.
++               */
++              if (pm_idle_save) {
++                      pm_idle_save(); /* enables IRQs */
++              } else {
++                      acpi_safe_halt();
++                      local_irq_enable();
++              }
++
++              /*
++               * TBD: Can't get time duration while in C1, as resumes
++               *      go to an ISR rather than here.  Need to instrument
++               *      base interrupt handler.
++               *
++               * Note: the TSC better not stop in C1, sched_clock() will
++               *       skew otherwise.
++               */
++              sleep_ticks = 0xFFFFFFFF;
++
++              break;
++
++      case ACPI_STATE_C2:
++              /* Get start time (ticks) */
++              t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
++              /* Tell the scheduler that we are going deep-idle: */
++              sched_clock_idle_sleep_event();
++              /* Invoke C2 */
++              acpi_state_timer_broadcast(pr, cx, 1);
++              acpi_cstate_enter(cx);
++              /* Get end time (ticks) */
++              t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
++
++#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
++              /* TSC halts in C2, so notify users */
++              if (tsc_halts_in_c(ACPI_STATE_C2))
++                      mark_tsc_unstable("possible TSC halt in C2");
++#endif
++              /* Compute time (ticks) that we were actually asleep */
++              sleep_ticks = ticks_elapsed(t1, t2);
++
++              /* Tell the scheduler how much we idled: */
++              sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
++
++              /* Re-enable interrupts */
++              local_irq_enable();
++              /* Do not account our idle-switching overhead: */
++              sleep_ticks -= cx->latency_ticks + C2_OVERHEAD;
++
++              current_thread_info()->status |= TS_POLLING;
++              acpi_state_timer_broadcast(pr, cx, 0);
++              break;
++
++      case ACPI_STATE_C3:
++              acpi_unlazy_tlb(smp_processor_id());
++              /*
++               * Must be done before busmaster disable as we might
++               * need to access HPET !
++               */
++              acpi_state_timer_broadcast(pr, cx, 1);
++              /*
++               * disable bus master
++               * bm_check implies we need ARB_DIS
++               * !bm_check implies we need cache flush
++               * bm_control implies whether we can do ARB_DIS
++               *
++               * That leaves a case where bm_check is set and bm_control is
++               * not set. In that case we cannot do much, we enter C3
++               * without doing anything.
++               */
++              if (pr->flags.bm_check && pr->flags.bm_control) {
++                      if (atomic_inc_return(&c3_cpu_count) ==
++                          num_online_cpus()) {
++                              /*
++                               * All CPUs are trying to go to C3
++                               * Disable bus master arbitration
++                               */
++                              acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
++                      }
++              } else if (!pr->flags.bm_check) {
++                      /* SMP with no shared cache... Invalidate cache  */
++                      ACPI_FLUSH_CPU_CACHE();
++              }
++
++              /* Get start time (ticks) */
++              t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
++              /* Invoke C3 */
++              /* Tell the scheduler that we are going deep-idle: */
++              sched_clock_idle_sleep_event();
++              acpi_cstate_enter(cx);
++              /* Get end time (ticks) */
++              t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
++              if (pr->flags.bm_check && pr->flags.bm_control) {
++                      /* Enable bus master arbitration */
++                      atomic_dec(&c3_cpu_count);
++                      acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
++              }
++
++#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
++              /* TSC halts in C3, so notify users */
++              if (tsc_halts_in_c(ACPI_STATE_C3))
++                      mark_tsc_unstable("TSC halts in C3");
++#endif
++              /* Compute time (ticks) that we were actually asleep */
++              sleep_ticks = ticks_elapsed(t1, t2);
++              /* Tell the scheduler how much we idled: */
++              sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
++
++              /* Re-enable interrupts */
++              local_irq_enable();
++              /* Do not account our idle-switching overhead: */
++              sleep_ticks -= cx->latency_ticks + C3_OVERHEAD;
++
++              current_thread_info()->status |= TS_POLLING;
++              acpi_state_timer_broadcast(pr, cx, 0);
++              break;
++
++      default:
++              local_irq_enable();
++              return;
++      }
++      cx->usage++;
++      if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0))
++              cx->time += sleep_ticks;
++
++      next_state = pr->power.state;
++
++#ifdef CONFIG_HOTPLUG_CPU
++      /* Don't do promotion/demotion */
++      if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
++          !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) {
++              next_state = cx;
++              goto end;
++      }
++#endif
++
++      /*
++       * Promotion?
++       * ----------
++       * Track the number of longs (time asleep is greater than threshold)
++       * and promote when the count threshold is reached.  Note that bus
++       * mastering activity may prevent promotions.
++       * Do not promote above max_cstate.
++       */
++      if (cx->promotion.state &&
++          ((cx->promotion.state - pr->power.states) <= max_cstate)) {
++              if (sleep_ticks > cx->promotion.threshold.ticks &&
++                cx->promotion.state->latency <=
++                              pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
++                      cx->promotion.count++;
++                      cx->demotion.count = 0;
++                      if (cx->promotion.count >=
++                          cx->promotion.threshold.count) {
++                              if (pr->flags.bm_check) {
++                                      if (!
++                                          (pr->power.bm_activity & cx->
++                                           promotion.threshold.bm)) {
++                                              next_state =
++                                                  cx->promotion.state;
++                                              goto end;
++                                      }
++                              } else {
++                                      next_state = cx->promotion.state;
++                                      goto end;
++                              }
++                      }
++              }
++      }
++
++      /*
++       * Demotion?
++       * ---------
++       * Track the number of shorts (time asleep is less than time threshold)
++       * and demote when the usage threshold is reached.
++       */
++      if (cx->demotion.state) {
++              if (sleep_ticks < cx->demotion.threshold.ticks) {
++                      cx->demotion.count++;
++                      cx->promotion.count = 0;
++                      if (cx->demotion.count >= cx->demotion.threshold.count) {
++                              next_state = cx->demotion.state;
++                              goto end;
++                      }
++              }
++      }
++
++      end:
++      /*
++       * Demote if current state exceeds max_cstate
++       * or if the latency of the current state is unacceptable
++       */
++      if ((pr->power.state - pr->power.states) > max_cstate ||
++              pr->power.state->latency >
++                              pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
++              if (cx->demotion.state)
++                      next_state = cx->demotion.state;
++      }
++
++      /*
++       * New Cx State?
++       * -------------
++       * If we're going to start using a new Cx state we must clean up
++       * from the previous and prepare to use the new.
++       */
++      if (next_state != pr->power.state)
++              acpi_processor_power_activate(pr, next_state);
++}
++
++static int acpi_processor_set_power_policy(struct acpi_processor *pr)
++{
++      unsigned int i;
++      unsigned int state_is_set = 0;
++      struct acpi_processor_cx *lower = NULL;
++      struct acpi_processor_cx *higher = NULL;
++      struct acpi_processor_cx *cx;
++
++
++      if (!pr)
++              return -EINVAL;
++
++      /*
++       * This function sets the default Cx state policy (OS idle handler).
++       * Our scheme is to promote quickly to C2 but more conservatively
++       * to C3.  We're favoring C2  for its characteristics of low latency
++       * (quick response), good power savings, and ability to allow bus
++       * mastering activity.  Note that the Cx state policy is completely
++       * customizable and can be altered dynamically.
++       */
++
++      /* startup state */
++      for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
++              cx = &pr->power.states[i];
++              if (!cx->valid)
++                      continue;
++
++              if (!state_is_set)
++                      pr->power.state = cx;
++              state_is_set++;
++              break;
++      }
++
++      if (!state_is_set)
++              return -ENODEV;
++
++      /* demotion */
++      for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
++              cx = &pr->power.states[i];
++              if (!cx->valid)
++                      continue;
++
++              if (lower) {
++                      cx->demotion.state = lower;
++                      cx->demotion.threshold.ticks = cx->latency_ticks;
++                      cx->demotion.threshold.count = 1;
++                      if (cx->type == ACPI_STATE_C3)
++                              cx->demotion.threshold.bm = bm_history;
++              }
++
++              lower = cx;
++      }
++
++      /* promotion */
++      for (i = (ACPI_PROCESSOR_MAX_POWER - 1); i > 0; i--) {
++              cx = &pr->power.states[i];
++              if (!cx->valid)
++                      continue;
++
++              if (higher) {
++                      cx->promotion.state = higher;
++                      cx->promotion.threshold.ticks = cx->latency_ticks;
++                      if (cx->type >= ACPI_STATE_C2)
++                              cx->promotion.threshold.count = 4;
++                      else
++                              cx->promotion.threshold.count = 10;
++                      if (higher->type == ACPI_STATE_C3)
++                              cx->promotion.threshold.bm = bm_history;
++              }
++
++              higher = cx;
++      }
++
++      return 0;
++}
++#endif /* !CONFIG_CPU_IDLE */
++
+ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
+ {
+@@ -541,7 +1047,11 @@
+        */
+       cx->valid = 1;
++#ifndef CONFIG_CPU_IDLE
++      cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
++#else
+       cx->latency_ticks = cx->latency;
++#endif
+       return;
+ }
+@@ -611,6 +1121,7 @@
+                                         " for C3 to be enabled on SMP systems\n"));
+                       return;
+               }
++              acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
+       }
+       /*
+@@ -621,16 +1132,11 @@
+        */
+       cx->valid = 1;
++#ifndef CONFIG_CPU_IDLE
++      cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
++#else
+       cx->latency_ticks = cx->latency;
+-      /*
+-       * On older chipsets, BM_RLD needs to be set
+-       * in order for Bus Master activity to wake the
+-       * system from C3.  Newer chipsets handle DMA
+-       * during C3 automatically and BM_RLD is a NOP.
+-       * In either case, the proper way to
+-       * handle BM_RLD is to set it and leave it set.
+-       */
+-      acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
++#endif
+       return;
+ }
+@@ -695,6 +1201,20 @@
+       pr->power.count = acpi_processor_power_verify(pr);
++#ifndef CONFIG_CPU_IDLE
++      /*
++       * Set Default Policy
++       * ------------------
++       * Now that we know which states are supported, set the default
++       * policy.  Note that this policy can be changed dynamically
++       * (e.g. encourage deeper sleeps to conserve battery life when
++       * not on AC).
++       */
++      result = acpi_processor_set_power_policy(pr);
++      if (result)
++              return result;
++#endif
++
+       /*
+        * if one state of type C2 or C3 is available, mark this
+        * CPU as being "idle manageable"
+@@ -792,6 +1312,69 @@
+       .release = single_release,
+ };
++#ifndef CONFIG_CPU_IDLE
++
++int acpi_processor_cst_has_changed(struct acpi_processor *pr)
++{
++      int result = 0;
++
++      if (boot_option_idle_override)
++              return 0;
++
++      if (!pr)
++              return -EINVAL;
++
++      if (nocst) {
++              return -ENODEV;
++      }
++
++      if (!pr->flags.power_setup_done)
++              return -ENODEV;
++
++      /*
++       * Fall back to the default idle loop, when pm_idle_save had
++       * been initialized.
++       */
++      if (pm_idle_save) {
++              pm_idle = pm_idle_save;
++              /* Relies on interrupts forcing exit from idle. */
++              synchronize_sched();
++      }
++
++      pr->flags.power = 0;
++      result = acpi_processor_get_power_info(pr);
++      if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
++              pm_idle = acpi_processor_idle;
++
++      return result;
++}
++
++#ifdef CONFIG_SMP
++static void smp_callback(void *v)
++{
++      /* we already woke the CPU up, nothing more to do */
++}
++
++/*
++ * This function gets called when a part of the kernel has a new latency
++ * requirement.  This means we need to get all processors out of their C-state,
++ * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that
++ * wakes them all right up.
++ */
++static int acpi_processor_latency_notify(struct notifier_block *b,
++              unsigned long l, void *v)
++{
++      smp_call_function(smp_callback, NULL, 1);
++      return NOTIFY_OK;
++}
++
++static struct notifier_block acpi_processor_latency_notifier = {
++      .notifier_call = acpi_processor_latency_notify,
++};
++
++#endif
++
++#else /* CONFIG_CPU_IDLE */
+ /**
+  * acpi_idle_bm_check - checks if bus master activity was detected
+@@ -800,7 +1383,7 @@
+ {
+       u32 bm_status = 0;
+-      acpi_get_register_unlocked(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
++      acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
+       if (bm_status)
+               acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
+       /*
+@@ -817,6 +1400,25 @@
+ }
+ /**
++ * acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state
++ * @pr: the processor
++ * @target: the new target state
++ */
++static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
++                                         struct acpi_processor_cx *target)
++{
++      if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) {
++              acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
++              pr->flags.bm_rld_set = 0;
++      }
++
++      if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) {
++              acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
++              pr->flags.bm_rld_set = 1;
++      }
++}
++
++/**
+  * acpi_idle_do_entry - a helper function that does C2 and C3 type entry
+  * @cx: cstate data
+  *
+@@ -871,6 +1473,9 @@
+               return 0;
+       }
++      if (pr->flags.bm_check)
++              acpi_idle_update_bm_rld(pr, cx);
++
+       t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+       acpi_idle_do_entry(cx);
+       t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+@@ -922,6 +1527,9 @@
+        */
+       acpi_state_timer_broadcast(pr, cx, 1);
++      if (pr->flags.bm_check)
++              acpi_idle_update_bm_rld(pr, cx);
++
+       if (cx->type == ACPI_STATE_C3)
+               ACPI_FLUSH_CPU_CACHE();
+@@ -1013,6 +1621,8 @@
+        */
+       acpi_state_timer_broadcast(pr, cx, 1);
++      acpi_idle_update_bm_rld(pr, cx);
++
+       /*
+        * disable bus master
+        * bm_check implies we need ARB_DIS
+@@ -1185,6 +1795,8 @@
+       return ret;
+ }
++#endif /* CONFIG_CPU_IDLE */
++
+ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
+                             struct acpi_device *device)
+ {
+@@ -1213,6 +1825,10 @@
+                              "ACPI: processor limited to max C-state %d\n",
+                              max_cstate);
+               first_run++;
++#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
++              pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
++                              &acpi_processor_latency_notifier);
++#endif
+       }
+       if (!pr)
+@@ -1236,9 +1852,11 @@
+        * platforms that only support C1.
+        */
+       if (pr->flags.power) {
++#ifdef CONFIG_CPU_IDLE
+               acpi_processor_setup_cpuidle(pr);
+               if (cpuidle_register_device(&pr->power.dev))
+                       return -EIO;
++#endif
+               printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
+               for (i = 1; i <= pr->power.count; i++)
+@@ -1246,6 +1864,13 @@
+                               printk(" C%d[C%d]", i,
+                                      pr->power.states[i].type);
+               printk(")\n");
++
++#ifndef CONFIG_CPU_IDLE
++              if (pr->id == 0) {
++                      pm_idle_save = pm_idle;
++                      pm_idle = acpi_processor_idle;
++              }
++#endif
+       }
+       /* 'power' [R] */
+@@ -1264,12 +1889,34 @@
+       if (boot_option_idle_override)
+               return 0;
++#ifdef CONFIG_CPU_IDLE
+       cpuidle_unregister_device(&pr->power.dev);
++#endif
+       pr->flags.power_setup_done = 0;
+       if (acpi_device_dir(device))
+               remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
+                                 acpi_device_dir(device));
++#ifndef CONFIG_CPU_IDLE
++
++      /* Unregister the idle handler when processor #0 is removed. */
++      if (pr->id == 0) {
++              if (pm_idle_save)
++                      pm_idle = pm_idle_save;
++
++              /*
++               * We are about to unload the current idle thread pm callback
++               * (pm_idle), Wait for all processors to update cached/local
++               * copies of pm_idle before proceeding.
++               */
++              cpu_idle_wait();
++#ifdef CONFIG_SMP
++              pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
++                              &acpi_processor_latency_notifier);
++#endif
++      }
++#endif
++
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/processor_perflib.c linux-2.6.29-rc3.owrt/drivers/acpi/processor_perflib.c
+--- linux-2.6.29.owrt/drivers/acpi/processor_perflib.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/processor_perflib.c     2009-05-10 23:48:28.000000000 +0200
+@@ -31,6 +31,14 @@
+ #include <linux/init.h>
+ #include <linux/cpufreq.h>
++#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/mutex.h>
++
++#include <asm/uaccess.h>
++#endif
++
+ #ifdef CONFIG_X86
+ #include <asm/cpufeature.h>
+ #endif
+@@ -426,6 +434,96 @@
+ EXPORT_SYMBOL(acpi_processor_notify_smm);
++#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
++/* /proc/acpi/processor/../performance interface (DEPRECATED) */
++
++static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
++static struct file_operations acpi_processor_perf_fops = {
++      .owner = THIS_MODULE,
++      .open = acpi_processor_perf_open_fs,
++      .read = seq_read,
++      .llseek = seq_lseek,
++      .release = single_release,
++};
++
++static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
++{
++      struct acpi_processor *pr = seq->private;
++      int i;
++
++
++      if (!pr)
++              goto end;
++
++      if (!pr->performance) {
++              seq_puts(seq, "<not supported>\n");
++              goto end;
++      }
++
++      seq_printf(seq, "state count:             %d\n"
++                 "active state:            P%d\n",
++                 pr->performance->state_count, pr->performance->state);
++
++      seq_puts(seq, "states:\n");
++      for (i = 0; i < pr->performance->state_count; i++)
++              seq_printf(seq,
++                         "   %cP%d:                  %d MHz, %d mW, %d uS\n",
++                         (i == pr->performance->state ? '*' : ' '), i,
++                         (u32) pr->performance->states[i].core_frequency,
++                         (u32) pr->performance->states[i].power,
++                         (u32) pr->performance->states[i].transition_latency);
++
++      end:
++      return 0;
++}
++
++static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
++{
++      return single_open(file, acpi_processor_perf_seq_show,
++                         PDE(inode)->data);
++}
++
++static void acpi_cpufreq_add_file(struct acpi_processor *pr)
++{
++      struct acpi_device *device = NULL;
++
++
++      if (acpi_bus_get_device(pr->handle, &device))
++              return;
++
++      /* add file 'performance' [R/W] */
++      proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO,
++                       acpi_device_dir(device),
++                       &acpi_processor_perf_fops, acpi_driver_data(device));
++      return;
++}
++
++static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
++{
++      struct acpi_device *device = NULL;
++
++
++      if (acpi_bus_get_device(pr->handle, &device))
++              return;
++
++      /* remove file 'performance' */
++      remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
++                        acpi_device_dir(device));
++
++      return;
++}
++
++#else
++static void acpi_cpufreq_add_file(struct acpi_processor *pr)
++{
++      return;
++}
++static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
++{
++      return;
++}
++#endif                                /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
++
+ static int acpi_processor_get_psd(struct acpi_processor       *pr)
+ {
+       int result = 0;
+@@ -649,12 +747,14 @@
+ }
+ EXPORT_SYMBOL(acpi_processor_preregister_performance);
++
+ int
+ acpi_processor_register_performance(struct acpi_processor_performance
+                                   *performance, unsigned int cpu)
+ {
+       struct acpi_processor *pr;
++
+       if (!(acpi_processor_ppc_status & PPC_REGISTERED))
+               return -EINVAL;
+@@ -681,6 +781,8 @@
+               return -EIO;
+       }
++      acpi_cpufreq_add_file(pr);
++
+       mutex_unlock(&performance_mutex);
+       return 0;
+ }
+@@ -693,6 +795,7 @@
+ {
+       struct acpi_processor *pr;
++
+       mutex_lock(&performance_mutex);
+       pr = per_cpu(processors, cpu);
+@@ -705,6 +808,8 @@
+               kfree(pr->performance->states);
+       pr->performance = NULL;
++      acpi_cpufreq_remove_file(pr);
++
+       mutex_unlock(&performance_mutex);
+       return;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/sleep.c linux-2.6.29-rc3.owrt/drivers/acpi/sleep.c
+--- linux-2.6.29.owrt/drivers/acpi/sleep.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/sleep.c 2009-05-10 23:48:28.000000000 +0200
+@@ -90,6 +90,31 @@
+       old_suspend_ordering = true;
+ }
++/*
++ * According to the ACPI specification the BIOS should make sure that ACPI is
++ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
++ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
++ * on such systems during resume.  Unfortunately that doesn't help in
++ * particularly pathological cases in which SCI_EN has to be set directly on
++ * resume, although the specification states very clearly that this flag is
++ * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
++ * cases.
++ */
++static bool set_sci_en_on_resume;
++/*
++ * The ACPI specification wants us to save NVS memory regions during hibernation
++ * and to restore them during the subsequent resume.  However, it is not certain
++ * if this mechanism is going to work on all machines, so we allow the user to
++ * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
++ * option.
++ */
++static bool s4_no_nvs;
++
++void __init acpi_s4_no_nvs(void)
++{
++      s4_no_nvs = true;
++}
++
+ /**
+  *    acpi_pm_disable_gpes - Disable the GPEs.
+  */
+@@ -168,18 +193,6 @@
+ #endif /* CONFIG_ACPI_SLEEP */
+ #ifdef CONFIG_SUSPEND
+-/*
+- * According to the ACPI specification the BIOS should make sure that ACPI is
+- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
+- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+- * on such systems during resume.  Unfortunately that doesn't help in
+- * particularly pathological cases in which SCI_EN has to be set directly on
+- * resume, although the specification states very clearly that this flag is
+- * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
+- * cases.
+- */
+-static bool set_sci_en_on_resume;
+-
+ extern void do_suspend_lowlevel(void);
+ static u32 acpi_suspend_states[] = {
+@@ -378,41 +391,11 @@
+               DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+               },
+       },
+-      {
+-      .callback = init_old_suspend_ordering,
+-      .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+-      .matches = {
+-              DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+-              DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+-              },
+-      },
+-      {
+-      .callback = init_set_sci_en_on_resume,
+-      .ident = "Toshiba Satellite L300",
+-      .matches = {
+-              DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+-              DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
+-              },
+-      },
+       {},
+ };
+ #endif /* CONFIG_SUSPEND */
+ #ifdef CONFIG_HIBERNATION
+-/*
+- * The ACPI specification wants us to save NVS memory regions during hibernation
+- * and to restore them during the subsequent resume.  However, it is not certain
+- * if this mechanism is going to work on all machines, so we allow the user to
+- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
+- * option.
+- */
+-static bool s4_no_nvs;
+-
+-void __init acpi_s4_no_nvs(void)
+-{
+-      s4_no_nvs = true;
+-}
+-
+ static unsigned long s4_hardware_signature;
+ static struct acpi_table_facs *facs;
+ static bool nosigcheck;
+@@ -696,7 +679,7 @@
+ static void acpi_power_off(void)
+ {
+       /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
+-      printk(KERN_DEBUG "%s called\n", __func__);
++      printk("%s called\n", __func__);
+       local_irq_disable();
+       acpi_enable_wakeup_device(ACPI_STATE_S5);
+       acpi_enter_sleep_state(ACPI_STATE_S5);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/tables.c linux-2.6.29-rc3.owrt/drivers/acpi/tables.c
+--- linux-2.6.29.owrt/drivers/acpi/tables.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/tables.c        2009-05-10 23:48:28.000000000 +0200
+@@ -293,12 +293,7 @@
+ int __init acpi_table_init(void)
+ {
+-      acpi_status status;
+-
+-      status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
+-      if (ACPI_FAILURE(status))
+-              return 1;
+-
++      acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
+       check_multiple_madt();
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/acpi/video.c linux-2.6.29-rc3.owrt/drivers/acpi/video.c
+--- linux-2.6.29.owrt/drivers/acpi/video.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/acpi/video.c 2009-05-10 23:48:28.000000000 +0200
+@@ -1020,7 +1020,7 @@
+       }
+       seq_printf(seq, "levels: ");
+-      for (i = 2; i < dev->brightness->count; i++)
++      for (i = 0; i < dev->brightness->count; i++)
+               seq_printf(seq, " %d", dev->brightness->levels[i]);
+       seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr);
+@@ -1059,7 +1059,7 @@
+               return -EFAULT;
+       /* validate through the list of available levels */
+-      for (i = 2; i < dev->brightness->count; i++)
++      for (i = 0; i < dev->brightness->count; i++)
+               if (level == dev->brightness->levels[i]) {
+                       if (ACPI_SUCCESS
+                           (acpi_video_device_lcd_set_level(dev, level)))
+@@ -1260,7 +1260,7 @@
+                       printk(KERN_WARNING PREFIX
+                              "This indicates a BIOS bug. Please contact the manufacturer.\n");
+               }
+-              printk(KERN_WARNING "%llx\n", options);
++              printk("%llx\n", options);
+               seq_printf(seq, "can POST: <integrated video>");
+               if (options & 2)
+                       seq_printf(seq, " <PCI video>");
+@@ -1712,7 +1712,7 @@
+       max = max_below = 0;
+       min = min_above = 255;
+       /* Find closest level to level_current */
+-      for (i = 2; i < device->brightness->count; i++) {
++      for (i = 0; i < device->brightness->count; i++) {
+               l = device->brightness->levels[i];
+               if (abs(l - level_current) < abs(delta)) {
+                       delta = l - level_current;
+@@ -1722,7 +1722,7 @@
+       }
+       /* Ajust level_current to closest available level */
+       level_current += delta;
+-      for (i = 2; i < device->brightness->count; i++) {
++      for (i = 0; i < device->brightness->count; i++) {
+               l = device->brightness->levels[i];
+               if (l < min)
+                       min = l;
+@@ -2006,12 +2006,6 @@
+                       device->pnp.bus_id[3] = '0' + instance;
+               instance ++;
+       }
+-      /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */
+-      if (!strcmp(device->pnp.bus_id, "VGA")) {
+-              if (instance)
+-                      device->pnp.bus_id[3] = '0' + instance;
+-              instance++;
+-      }
+       video->device = device;
+       strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/ahci.c linux-2.6.29-rc3.owrt/drivers/ata/ahci.c
+--- linux-2.6.29.owrt/drivers/ata/ahci.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/ahci.c   2009-05-10 23:48:28.000000000 +0200
+@@ -61,14 +61,9 @@
+ #define EM_MSG_LED_VALUE_ON           0x00010000
+ static int ahci_skip_host_reset;
+-static int ahci_ignore_sss;
+-
+ module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
+ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+-module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+-MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+-
+ static int ahci_enable_alpm(struct ata_port *ap,
+               enum link_pm policy);
+ static void ahci_disable_alpm(struct ata_port *ap);
+@@ -582,18 +577,18 @@
+       { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },            /* MCP79 */
+       { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },            /* MCP79 */
+       { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },            /* MCP79 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },            /* MCP89 */
+-      { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },            /* MCP89 */
++      { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci },            /* MCP7B */
++      { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },            /* MCP7B */
+       /* SiS */
+       { PCI_VDEVICE(SI, 0x1184), board_ahci },                /* SiS 966 */
+@@ -2697,10 +2692,8 @@
+       host->iomap = pcim_iomap_table(pdev);
+       host->private_data = hpriv;
+-      if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
++      if (!(hpriv->cap & HOST_CAP_SSS))
+               host->flags |= ATA_HOST_PARALLEL_SCAN;
+-      else
+-              printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+       if (pi.flags & ATA_FLAG_EM)
+               ahci_reset_em(host);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/ata_piix.c linux-2.6.29-rc3.owrt/drivers/ata/ata_piix.c
+--- linux-2.6.29.owrt/drivers/ata/ata_piix.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/ata_piix.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1289,39 +1289,6 @@
+       return map;
+ }
+-static bool piix_no_sidpr(struct ata_host *host)
+-{
+-      struct pci_dev *pdev = to_pci_dev(host->dev);
+-
+-      /*
+-       * Samsung DB-P70 only has three ATA ports exposed and
+-       * curiously the unconnected first port reports link online
+-       * while not responding to SRST protocol causing excessive
+-       * detection delay.
+-       *
+-       * Unfortunately, the system doesn't carry enough DMI
+-       * information to identify the machine but does have subsystem
+-       * vendor and device set.  As it's unclear whether the
+-       * subsystem vendor/device is used only for this specific
+-       * board, the port can't be disabled solely with the
+-       * information; however, turning off SIDPR access works around
+-       * the problem.  Turn it off.
+-       *
+-       * This problem is reported in bnc#441240.
+-       *
+-       * https://bugzilla.novell.com/show_bug.cgi?id=441420
+-       */
+-      if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+-          pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+-          pdev->subsystem_device == 0xb049) {
+-              dev_printk(KERN_WARNING, host->dev,
+-                         "Samsung DB-P70 detected, disabling SIDPR\n");
+-              return true;
+-      }
+-
+-      return false;
+-}
+-
+ static int __devinit piix_init_sidpr(struct ata_host *host)
+ {
+       struct pci_dev *pdev = to_pci_dev(host->dev);
+@@ -1335,10 +1302,6 @@
+               if (hpriv->map[i] == IDE)
+                       return 0;
+-      /* is it blacklisted? */
+-      if (piix_no_sidpr(host))
+-              return 0;
+-
+       if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
+               return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata-core.c linux-2.6.29-rc3.owrt/drivers/ata/libata-core.c
+--- linux-2.6.29.owrt/drivers/ata/libata-core.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata-core.c    2009-05-10 23:48:28.000000000 +0200
+@@ -164,11 +164,6 @@
+ MODULE_VERSION(DRV_VERSION);
+-static bool ata_sstatus_online(u32 sstatus)
+-{
+-      return (sstatus & 0xf) == 0x3;
+-}
+-
+ /**
+  *    ata_link_next - link iteration helper
+  *    @link: the previous link, NULL to start
+@@ -1020,6 +1015,18 @@
+       return spd_str[spd - 1];
+ }
++void ata_dev_disable(struct ata_device *dev)
++{
++      if (ata_dev_enabled(dev)) {
++              if (ata_msg_drv(dev->link->ap))
++                      ata_dev_printk(dev, KERN_WARNING, "disabled\n");
++              ata_acpi_on_disable(dev);
++              ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
++                                           ATA_DNXFER_QUIET);
++              dev->class++;
++      }
++}
++
+ static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
+ {
+       struct ata_link *link = dev->link;
+@@ -1322,16 +1329,14 @@
+ {
+       if (ata_id_has_lba(id)) {
+               if (ata_id_has_lba48(id))
+-                      return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
++                      return ata_id_u64(id, 100);
+               else
+-                      return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
++                      return ata_id_u32(id, 60);
+       } else {
+               if (ata_id_current_chs_valid(id))
+-                      return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+-                             id[ATA_ID_CUR_SECTORS];
++                      return ata_id_u32(id, 57);
+               else
+-                      return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+-                             id[ATA_ID_SECTORS];
++                      return id[1] * id[3] * id[6];
+       }
+ }
+@@ -2234,40 +2239,6 @@
+       return rc;
+ }
+-static int ata_do_link_spd_horkage(struct ata_device *dev)
+-{
+-      struct ata_link *plink = ata_dev_phys_link(dev);
+-      u32 target, target_limit;
+-
+-      if (!sata_scr_valid(plink))
+-              return 0;
+-
+-      if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+-              target = 1;
+-      else
+-              return 0;
+-
+-      target_limit = (1 << target) - 1;
+-
+-      /* if already on stricter limit, no need to push further */
+-      if (plink->sata_spd_limit <= target_limit)
+-              return 0;
+-
+-      plink->sata_spd_limit = target_limit;
+-
+-      /* Request another EH round by returning -EAGAIN if link is
+-       * going faster than the target speed.  Forward progress is
+-       * guaranteed by setting sata_spd_limit to target_limit above.
+-       */
+-      if (plink->sata_spd > target) {
+-              ata_dev_printk(dev, KERN_INFO,
+-                             "applying link speed limit horkage to %s\n",
+-                             sata_spd_string(target));
+-              return -EAGAIN;
+-      }
+-      return 0;
+-}
+-
+ static inline u8 ata_dev_knobble(struct ata_device *dev)
+ {
+       struct ata_port *ap = dev->link->ap;
+@@ -2358,10 +2329,6 @@
+               return 0;
+       }
+-      rc = ata_do_link_spd_horkage(dev);
+-      if (rc)
+-              return rc;
+-
+       /* let ACPI work its magic */
+       rc = ata_acpi_on_devcfg(dev);
+       if (rc)
+@@ -2817,7 +2784,7 @@
+                       /* This is the last chance, better to slow
+                        * down than lose it.
+                        */
+-                      sata_down_spd_limit(&ap->link, 0);
++                      sata_down_spd_limit(&ap->link);
+                       ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+               }
+       }
+@@ -2913,27 +2880,21 @@
+ /**
+  *    sata_down_spd_limit - adjust SATA spd limit downward
+  *    @link: Link to adjust SATA spd limit for
+- *    @spd_limit: Additional limit
+  *
+  *    Adjust SATA spd limit of @link downward.  Note that this
+  *    function only adjusts the limit.  The change must be applied
+  *    using sata_set_spd().
+  *
+- *    If @spd_limit is non-zero, the speed is limited to equal to or
+- *    lower than @spd_limit if such speed is supported.  If
+- *    @spd_limit is slower than any supported speed, only the lowest
+- *    supported speed is allowed.
+- *
+  *    LOCKING:
+  *    Inherited from caller.
+  *
+  *    RETURNS:
+  *    0 on success, negative errno on failure
+  */
+-int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
++int sata_down_spd_limit(struct ata_link *link)
+ {
+       u32 sstatus, spd, mask;
+-      int rc, bit;
++      int rc, highbit;
+       if (!sata_scr_valid(link))
+               return -EOPNOTSUPP;
+@@ -2942,7 +2903,7 @@
+        * If not, use cached value in link->sata_spd.
+        */
+       rc = sata_scr_read(link, SCR_STATUS, &sstatus);
+-      if (rc == 0 && ata_sstatus_online(sstatus))
++      if (rc == 0)
+               spd = (sstatus >> 4) & 0xf;
+       else
+               spd = link->sata_spd;
+@@ -2952,8 +2913,8 @@
+               return -EINVAL;
+       /* unconditionally mask off the highest bit */
+-      bit = fls(mask) - 1;
+-      mask &= ~(1 << bit);
++      highbit = fls(mask) - 1;
++      mask &= ~(1 << highbit);
+       /* Mask off all speeds higher than or equal to the current
+        * one.  Force 1.5Gbps if current SPD is not available.
+@@ -2967,15 +2928,6 @@
+       if (!mask)
+               return -EINVAL;
+-      if (spd_limit) {
+-              if (mask & ((1 << spd_limit) - 1))
+-                      mask &= (1 << spd_limit) - 1;
+-              else {
+-                      bit = ffs(mask) - 1;
+-                      mask = 1 << bit;
+-              }
+-      }
+-
+       link->sata_spd_limit = mask;
+       ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
+@@ -4263,9 +4215,6 @@
+       /* Devices that do not need bridging limits applied */
+       { "MTRON MSP-SATA*",            NULL,   ATA_HORKAGE_BRIDGE_OK, },
+-      /* Devices which aren't very happy with higher link speeds */
+-      { "WD My Book",                 NULL,   ATA_HORKAGE_1_5_GBPS, },
+-
+       /* End Marker */
+       { }
+ };
+@@ -4614,7 +4563,7 @@
+       VPRINTK("unmapping %u sg elements\n", qc->n_elem);
+       if (qc->n_elem)
+-              dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
++              dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+       qc->flags &= ~ATA_QCFLAG_DMAMAP;
+       qc->sg = NULL;
+@@ -4729,7 +4678,7 @@
+               return -1;
+       DPRINTK("%d sg elements mapped\n", n_elem);
+-      qc->orig_n_elem = qc->n_elem;
++
+       qc->n_elem = n_elem;
+       qc->flags |= ATA_QCFLAG_DMAMAP;
+@@ -4760,7 +4709,8 @@
+ /**
+  *    ata_qc_new - Request an available ATA command, for queueing
+- *    @ap: target port
++ *    @ap: Port associated with device @dev
++ *    @dev: Device from whom we request an available command structure
+  *
+  *    LOCKING:
+  *    None.
+@@ -5225,7 +5175,7 @@
+       u32 sstatus;
+       if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
+-          ata_sstatus_online(sstatus))
++          (sstatus & 0xf) == 0x3)
+               return true;
+       return false;
+ }
+@@ -5249,7 +5199,7 @@
+       u32 sstatus;
+       if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
+-          !ata_sstatus_online(sstatus))
++          (sstatus & 0xf) != 0x3)
+               return true;
+       return false;
+ }
+@@ -5462,8 +5412,8 @@
+       dev->horkage = 0;
+       spin_unlock_irqrestore(ap->lock, flags);
+-      memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+-             ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
++      memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
++             sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+       dev->pio_mask = UINT_MAX;
+       dev->mwdma_mask = UINT_MAX;
+       dev->udma_mask = UINT_MAX;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata-eh.c linux-2.6.29-rc3.owrt/drivers/ata/libata-eh.c
+--- linux-2.6.29.owrt/drivers/ata/libata-eh.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata-eh.c      2009-05-10 23:48:28.000000000 +0200
+@@ -82,10 +82,6 @@
+       ATA_EH_FASTDRAIN_INTERVAL       =  3000,
+       ATA_EH_UA_TRIES                 = 5,
+-
+-      /* probe speed down parameters, see ata_eh_schedule_probe() */
+-      ATA_EH_PROBE_TRIAL_INTERVAL     = 60000,        /* 1 min */
+-      ATA_EH_PROBE_TRIALS             = 2,
+ };
+ /* The following table determines how we sequence resets.  Each entry
+@@ -1180,32 +1176,6 @@
+ }
+ /**
+- *    ata_dev_disable - disable ATA device
+- *    @dev: ATA device to disable
+- *
+- *    Disable @dev.
+- *
+- *    Locking:
+- *    EH context.
+- */
+-void ata_dev_disable(struct ata_device *dev)
+-{
+-      if (!ata_dev_enabled(dev))
+-              return;
+-
+-      if (ata_msg_drv(dev->link->ap))
+-              ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+-      ata_acpi_on_disable(dev);
+-      ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
+-      dev->class++;
+-
+-      /* From now till the next successful probe, ering is used to
+-       * track probe failures.  Clear accumulated device error info.
+-       */
+-      ata_ering_clear(&dev->ering);
+-}
+-
+-/**
+  *    ata_eh_detach_dev - detach ATA device
+  *    @dev: ATA device to detach
+  *
+@@ -1879,7 +1849,7 @@
+       /* speed down? */
+       if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
+               /* speed down SATA link speed if possible */
+-              if (sata_down_spd_limit(link, 0) == 0) {
++              if (sata_down_spd_limit(link) == 0) {
+                       action |= ATA_EH_RESET;
+                       goto done;
+               }
+@@ -2423,14 +2393,11 @@
+               }
+               /* prereset() might have cleared ATA_EH_RESET.  If so,
+-               * bang classes, thaw and return.
++               * bang classes and return.
+                */
+               if (reset && !(ehc->i.action & ATA_EH_RESET)) {
+                       ata_for_each_dev(dev, link, ALL)
+                               classes[dev->devno] = ATA_DEV_NONE;
+-                      if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+-                          ata_is_host_link(link))
+-                              ata_eh_thaw_port(ap);
+                       rc = 0;
+                       goto out;
+               }
+@@ -2634,11 +2601,11 @@
+       }
+       if (try == max_tries - 1) {
+-              sata_down_spd_limit(link, 0);
++              sata_down_spd_limit(link);
+               if (slave)
+-                      sata_down_spd_limit(slave, 0);
++                      sata_down_spd_limit(slave);
+       } else if (rc == -EPIPE)
+-              sata_down_spd_limit(failed_link, 0);
++              sata_down_spd_limit(failed_link);
+       if (hardreset)
+               reset = hardreset;
+@@ -2777,8 +2744,6 @@
+                                                    readid_flags, dev->id);
+                       switch (rc) {
+                       case 0:
+-                              /* clear error info accumulated during probe */
+-                              ata_ering_clear(&dev->ering);
+                               new_mask |= 1 << dev->devno;
+                               break;
+                       case -ENOENT:
+@@ -2904,7 +2869,7 @@
+       int i;
+       for (i = 0; i < ATA_EH_UA_TRIES; i++) {
+-              u8 *sense_buffer = dev->link->ap->sector_buf;
++              u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+               u8 sense_key = 0;
+               unsigned int err_mask;
+@@ -2982,24 +2947,9 @@
+       return 1;
+ }
+-static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
+-{
+-      u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
+-      u64 now = get_jiffies_64();
+-      int *trials = void_arg;
+-
+-      if (ent->timestamp < now - min(now, interval))
+-              return -1;
+-
+-      (*trials)++;
+-      return 0;
+-}
+-
+ static int ata_eh_schedule_probe(struct ata_device *dev)
+ {
+       struct ata_eh_context *ehc = &dev->link->eh_context;
+-      struct ata_link *link = ata_dev_phys_link(dev);
+-      int trials = 0;
+       if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
+           (ehc->did_probe_mask & (1 << dev->devno)))
+@@ -3012,25 +2962,6 @@
+       ehc->saved_xfer_mode[dev->devno] = 0;
+       ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+-      /* Record and count probe trials on the ering.  The specific
+-       * error mask used is irrelevant.  Because a successful device
+-       * detection clears the ering, this count accumulates only if
+-       * there are consecutive failed probes.
+-       *
+-       * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
+-       * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
+-       * forced to 1.5Gbps.
+-       *
+-       * This is to work around cases where failed link speed
+-       * negotiation results in device misdetection leading to
+-       * infinite DEVXCHG or PHRDY CHG events.
+-       */
+-      ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
+-      ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
+-
+-      if (trials > ATA_EH_PROBE_TRIALS)
+-              sata_down_spd_limit(link, 1);
+-
+       return 1;
+ }
+@@ -3038,11 +2969,7 @@
+ {
+       struct ata_eh_context *ehc = &dev->link->eh_context;
+-      /* -EAGAIN from EH routine indicates retry without prejudice.
+-       * The requester is responsible for ensuring forward progress.
+-       */
+-      if (err != -EAGAIN)
+-              ehc->tries[dev->devno]--;
++      ehc->tries[dev->devno]--;
+       switch (err) {
+       case -ENODEV:
+@@ -3052,13 +2979,12 @@
+               /* give it just one more chance */
+               ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
+       case -EIO:
+-              if (ehc->tries[dev->devno] == 1) {
++              if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+                       /* This is the last chance, better to slow
+                        * down than lose it.
+                        */
+-                      sata_down_spd_limit(ata_dev_phys_link(dev), 0);
+-                      if (dev->pio_mode > XFER_PIO_0)
+-                              ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
++                      sata_down_spd_limit(ata_dev_phys_link(dev));
++                      ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata.h linux-2.6.29-rc3.owrt/drivers/ata/libata.h
+--- linux-2.6.29.owrt/drivers/ata/libata.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata.h 2009-05-10 23:48:28.000000000 +0200
+@@ -79,6 +79,7 @@
+                          u64 block, u32 n_block, unsigned int tf_flags,
+                          unsigned int tag);
+ extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
++extern void ata_dev_disable(struct ata_device *dev);
+ extern void ata_pio_queue_task(struct ata_port *ap, void *data,
+                              unsigned long delay);
+ extern void ata_port_flush_task(struct ata_port *ap);
+@@ -99,7 +100,7 @@
+ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
+                             unsigned int readid_flags);
+ extern int ata_dev_configure(struct ata_device *dev);
+-extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
++extern int sata_down_spd_limit(struct ata_link *link);
+ extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
+ extern void ata_sg_clean(struct ata_queued_cmd *qc);
+ extern void ata_qc_free(struct ata_queued_cmd *qc);
+@@ -159,7 +160,6 @@
+ extern void ata_port_wait_eh(struct ata_port *ap);
+ extern void ata_eh_fastdrain_timerfn(unsigned long arg);
+ extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+-extern void ata_dev_disable(struct ata_device *dev);
+ extern void ata_eh_detach_dev(struct ata_device *dev);
+ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
+                              unsigned int action);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata-pmp.c linux-2.6.29-rc3.owrt/drivers/ata/libata-pmp.c
+--- linux-2.6.29.owrt/drivers/ata/libata-pmp.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata-pmp.c     2009-05-10 23:48:28.000000000 +0200
+@@ -729,7 +729,7 @@
+               if (tries) {
+                       /* consecutive revalidation failures? speed down */
+                       if (reval_failed)
+-                              sata_down_spd_limit(link, 0);
++                              sata_down_spd_limit(link);
+                       else
+                               reval_failed = 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata-scsi.c linux-2.6.29-rc3.owrt/drivers/ata/libata-scsi.c
+--- linux-2.6.29.owrt/drivers/ata/libata-scsi.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata-scsi.c    2009-05-10 23:48:28.000000000 +0200
+@@ -415,7 +415,6 @@
+ /**
+  *    ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+- *    @ap: target port
+  *    @sdev: SCSI device to get identify data for
+  *    @arg: User buffer area for identify data
+  *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/libata-sff.c linux-2.6.29-rc3.owrt/drivers/ata/libata-sff.c
+--- linux-2.6.29.owrt/drivers/ata/libata-sff.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/libata-sff.c     2009-05-10 23:48:28.000000000 +0200
+@@ -773,32 +773,18 @@
+       else
+               iowrite32_rep(data_addr, buf, words);
+-      /* Transfer trailing bytes, if any */
+       if (unlikely(slop)) {
+-              unsigned char pad[4];
+-
+-              /* Point buf to the tail of buffer */
+-              buf += buflen - slop;
+-
+-              /*
+-               * Use io*_rep() accessors here as well to avoid pointlessly
+-               * swapping bytes to and fro on the big endian machines...
+-               */
++              __le32 pad;
+               if (rw == READ) {
+-                      if (slop < 3)
+-                              ioread16_rep(data_addr, pad, 1);
+-                      else
+-                              ioread32_rep(data_addr, pad, 1);
+-                      memcpy(buf, pad, slop);
++                      pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
++                      memcpy(buf + buflen - slop, &pad, slop);
+               } else {
+-                      memcpy(pad, buf, slop);
+-                      if (slop < 3)
+-                              iowrite16_rep(data_addr, pad, 1);
+-                      else
+-                              iowrite32_rep(data_addr, pad, 1);
++                      memcpy(&pad, buf + buflen - slop, slop);
++                      iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+               }
++              words++;
+       }
+-      return (buflen + 1) & ~1;
++      return words << 2;
+ }
+ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
+@@ -2066,7 +2052,6 @@
+       iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+       udelay(20);     /* FIXME: flush */
+       iowrite8(ap->ctl, ioaddr->ctl_addr);
+-      ap->last_ctl = ap->ctl;
+       /* wait the port to become ready */
+       return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
+@@ -2191,10 +2176,8 @@
+       }
+       /* set up device control */
+-      if (ap->ioaddr.ctl_addr) {
++      if (ap->ioaddr.ctl_addr)
+               iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+-              ap->last_ctl = ap->ctl;
+-      }
+ }
+ EXPORT_SYMBOL_GPL(ata_sff_postreset);
+@@ -2537,7 +2520,6 @@
+       if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
+               /* set up device control for ATA_FLAG_SATA_RESET */
+               iowrite8(ap->ctl, ioaddr->ctl_addr);
+-              ap->last_ctl = ap->ctl;
+       }
+       DPRINTK("EXIT\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/pata_amd.c linux-2.6.29-rc3.owrt/drivers/ata/pata_amd.c
+--- linux-2.6.29.owrt/drivers/ata/pata_amd.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/pata_amd.c       2009-05-10 23:48:28.000000000 +0200
+@@ -24,7 +24,7 @@
+ #include <linux/libata.h>
+ #define DRV_NAME "pata_amd"
+-#define DRV_VERSION "0.4.1"
++#define DRV_VERSION "0.3.11"
+ /**
+  *    timing_setup            -       shared timing computation and load
+@@ -145,13 +145,6 @@
+       return ata_sff_prereset(link, deadline);
+ }
+-/**
+- *    amd_cable_detect        -       report cable type
+- *    @ap: port
+- *
+- *    AMD controller/BIOS setups record the cable type in word 0x42
+- */
+-
+ static int amd_cable_detect(struct ata_port *ap)
+ {
+       static const u32 bitmask[2] = {0x03, 0x0C};
+@@ -165,40 +158,6 @@
+ }
+ /**
+- *    amd_fifo_setup          -       set the PIO FIFO for ATA/ATAPI
+- *    @ap: ATA interface
+- *    @adev: ATA device
+- *
+- *    Set the PCI fifo for this device according to the devices present
+- *    on the bus at this point in time. We need to turn the post write buffer
+- *    off for ATAPI devices as we may need to issue a word sized write to the
+- *    device as the final I/O
+- */
+-
+-static void amd_fifo_setup(struct ata_port *ap)
+-{
+-      struct ata_device *adev;
+-      struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+-      static const u8 fifobit[2] = { 0xC0, 0x30};
+-      u8 fifo = fifobit[ap->port_no];
+-      u8 r;
+-
+-
+-      ata_for_each_dev(adev, &ap->link, ENABLED) {
+-              if (adev->class == ATA_DEV_ATAPI)
+-                      fifo = 0;
+-      }
+-      if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */
+-              fifo = 0;
+-
+-      /* On the later chips the read prefetch bits become no-op bits */
+-      pci_read_config_byte(pdev, 0x41, &r);
+-      r &= ~fifobit[ap->port_no];
+-      r |= fifo;
+-      pci_write_config_byte(pdev, 0x41, r);
+-}
+-
+-/**
+  *    amd33_set_piomode       -       set initial PIO mode data
+  *    @ap: ATA interface
+  *    @adev: ATA device
+@@ -208,25 +167,21 @@
+ static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
+ {
+-      amd_fifo_setup(ap);
+       timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
+ }
+ static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
+ {
+-      amd_fifo_setup(ap);
+       timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
+ }
+ static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
+ {
+-      amd_fifo_setup(ap);
+       timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
+ }
+ static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
+ {
+-      amd_fifo_setup(ap);
+       timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
+ }
+@@ -442,16 +397,6 @@
+       .set_dmamode    = nv133_set_dmamode,
+ };
+-static void amd_clear_fifo(struct pci_dev *pdev)
+-{
+-      u8 fifo;
+-      /* Disable the FIFO, the FIFO logic will re-enable it as
+-         appropriate */
+-      pci_read_config_byte(pdev, 0x41, &fifo);
+-      fifo &= 0x0F;
+-      pci_write_config_byte(pdev, 0x41, fifo);
+-}
+-
+ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+ {
+       static const struct ata_port_info info[10] = {
+@@ -558,8 +503,14 @@
+       if (type < 3)
+               ata_pci_bmdma_clear_simplex(pdev);
+-      if (pdev->vendor == PCI_VENDOR_ID_AMD)
+-              amd_clear_fifo(pdev);
++
++      /* Check for AMD7411 */
++      if (type == 3)
++              /* FIFO is broken */
++              pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
++      else
++              pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
++
+       /* Cable detection on Nvidia chips doesn't work too well,
+        * cache BIOS programmed UDMA mode.
+        */
+@@ -585,11 +536,18 @@
+               return rc;
+       if (pdev->vendor == PCI_VENDOR_ID_AMD) {
+-              amd_clear_fifo(pdev);
++              u8 fifo;
++              pci_read_config_byte(pdev, 0x41, &fifo);
++              if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
++                      /* FIFO is broken */
++                      pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
++              else
++                      pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+               if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
+                   pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
+                       ata_pci_bmdma_clear_simplex(pdev);
+       }
++
+       ata_host_resume(host);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/pata_it821x.c linux-2.6.29-rc3.owrt/drivers/ata/pata_it821x.c
+--- linux-2.6.29.owrt/drivers/ata/pata_it821x.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/pata_it821x.c    2009-05-10 23:48:28.000000000 +0200
+@@ -557,9 +557,6 @@
+               id[83] |= 0x4400;       /* Word 83 is valid and LBA48 */
+               id[86] |= 0x0400;       /* LBA48 on */
+               id[ATA_ID_MAJOR_VER] |= 0x1F;
+-              /* Clear the serial number because it's different each boot
+-                 which breaks validation on resume */
+-              memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN);
+       }
+       return err_mask;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/pata_legacy.c linux-2.6.29-rc3.owrt/drivers/ata/pata_legacy.c
+--- linux-2.6.29.owrt/drivers/ata/pata_legacy.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/pata_legacy.c    2009-05-10 23:48:28.000000000 +0200
+@@ -283,10 +283,9 @@
+ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+                       unsigned char *buf, unsigned int buflen, int rw)
+ {
+-      int slop = buflen & 3;
+-      /* 32bit I/O capable *and* we need to write a whole number of dwords */
+-      if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
++      if (ata_id_has_dword_io(dev->id)) {
+               struct ata_port *ap = dev->link->ap;
++              int slop = buflen & 3;
+               unsigned long flags;
+               local_irq_save(flags);
+@@ -736,7 +735,7 @@
+       struct ata_port *ap = adev->link->ap;
+       int slop = buflen & 3;
+-      if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
++      if (ata_id_has_dword_io(adev->id)) {
+               if (rw == WRITE)
+                       iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+               else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/pata_qdi.c linux-2.6.29-rc3.owrt/drivers/ata/pata_qdi.c
+--- linux-2.6.29.owrt/drivers/ata/pata_qdi.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/pata_qdi.c       2009-05-10 23:48:28.000000000 +0200
+@@ -12,7 +12,7 @@
+  *
+  * Probe code based on drivers/ide/legacy/qd65xx.c
+  * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+- * Samuel Thibault <samuel.thibault@ens-lyon.org>
++ * Samuel Thibault <samuel.thibault@fnac.net>
+  */
+ #include <linux/kernel.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/pata_via.c linux-2.6.29-rc3.owrt/drivers/ata/pata_via.c
+--- linux-2.6.29.owrt/drivers/ata/pata_via.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/pata_via.c       2009-05-10 23:48:28.000000000 +0200
+@@ -110,8 +110,7 @@
+       { "vt8237s",    PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+       { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+       { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
+-      { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+-      { "vt6415",     PCI_DEVICE_ID_VIA_6415,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
++      { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+       { "vt8237a",    PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+       { "vt8237",     PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+       { "vt8235",     PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+@@ -594,7 +593,6 @@
+ #endif
+ static const struct pci_device_id via[] = {
+-      { PCI_VDEVICE(VIA, 0x0415), },
+       { PCI_VDEVICE(VIA, 0x0571), },
+       { PCI_VDEVICE(VIA, 0x0581), },
+       { PCI_VDEVICE(VIA, 0x1571), },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/sata_mv.c linux-2.6.29-rc3.owrt/drivers/ata/sata_mv.c
+--- linux-2.6.29.owrt/drivers/ata/sata_mv.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/sata_mv.c        2009-05-10 23:48:28.000000000 +0200
+@@ -663,8 +663,8 @@
+       { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
+       /* RocketRAID 1720/174x have different identifiers */
+       { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
+-      { PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+-      { PCI_VDEVICE(TTI, 0x1742), chip_6042 },
++      { PCI_VDEVICE(TTI, 0x1740), chip_508x },
++      { PCI_VDEVICE(TTI, 0x1742), chip_508x },
+       { PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
+       { PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
+@@ -2218,13 +2218,12 @@
+               else
+                       handled = mv_host_intr(host, pending_irqs);
+       }
++      spin_unlock(&host->lock);
+       /* for MSI: unmask; interrupt cause bits will retrigger now */
+       if (using_msi)
+               writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+-      spin_unlock(&host->lock);
+-
+       return IRQ_RETVAL(handled);
+ }
+@@ -3115,17 +3114,19 @@
+               writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
+       }
+-      /* Clear any currently outstanding host interrupt conditions */
+-      writelfl(0, mmio + hpriv->irq_cause_ofs);
++      if (!IS_SOC(hpriv)) {
++              /* Clear any currently outstanding host interrupt conditions */
++              writelfl(0, mmio + hpriv->irq_cause_ofs);
+-      /* and unmask interrupt generation for host regs */
+-      writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
++              /* and unmask interrupt generation for host regs */
++              writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+-      /*
+-       * enable only global host interrupts for now.
+-       * The per-port interrupts get done later as ports are set up.
+-       */
+-      mv_set_main_irq_mask(host, 0, PCI_ERR);
++              /*
++               * enable only global host interrupts for now.
++               * The per-port interrupts get done later as ports are set up.
++               */
++              mv_set_main_irq_mask(host, 0, PCI_ERR);
++      }
+ done:
+       return rc;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/sata_nv.c linux-2.6.29-rc3.owrt/drivers/ata/sata_nv.c
+--- linux-2.6.29.owrt/drivers/ata/sata_nv.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/sata_nv.c        2009-05-10 23:48:28.000000000 +0200
+@@ -421,33 +421,26 @@
+       .hardreset              = ATA_OP_NULL,
+ };
+-/* nf2 is ripe with hardreset related problems.
+- *
+- * kernel bz#3352 reports nf2/3 controllers can't determine device
+- * signature reliably.  The following thread reports detection failure
+- * on cold boot with the standard debouncing timing.
++/* OSDL bz3352 reports that nf2/3 controllers can't determine device
++ * signature reliably.  Also, the following thread reports detection
++ * failure on cold boot with the standard debouncing timing.
+  *
+  * http://thread.gmane.org/gmane.linux.ide/34098
+  *
+- * And bz#12176 reports that hardreset simply doesn't work on nf2.
+- * Give up on it and just don't do hardreset.
++ * Debounce with hotplug timing and request follow-up SRST.
+  */
+ static struct ata_port_operations nv_nf2_ops = {
+-      .inherits               = &nv_generic_ops,
++      .inherits               = &nv_common_ops,
+       .freeze                 = nv_nf2_freeze,
+       .thaw                   = nv_nf2_thaw,
++      .hardreset              = nv_noclassify_hardreset,
+ };
+-/* For initial probing after boot and hot plugging, hardreset mostly
+- * works fine on CK804 but curiously, reprobing on the initial port by
+- * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
+- * in somewhat undeterministic way.  Use noclassify hardreset.
+- */
++/* CK804 finally gets hardreset right */
+ static struct ata_port_operations nv_ck804_ops = {
+       .inherits               = &nv_common_ops,
+       .freeze                 = nv_ck804_freeze,
+       .thaw                   = nv_ck804_thaw,
+-      .hardreset              = nv_noclassify_hardreset,
+       .host_stop              = nv_ck804_host_stop,
+ };
+@@ -2523,7 +2516,7 @@
+ module_init(nv_init);
+ module_exit(nv_exit);
+ module_param_named(adma, adma_enabled, bool, 0444);
+-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
++MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+ module_param_named(swncq, swncq_enabled, bool, 0444);
+ MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ata/sata_sil.c linux-2.6.29-rc3.owrt/drivers/ata/sata_sil.c
+--- linux-2.6.29.owrt/drivers/ata/sata_sil.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ata/sata_sil.c       2009-05-10 23:48:28.000000000 +0200
+@@ -44,7 +44,6 @@
+ #include <linux/device.h>
+ #include <scsi/scsi_host.h>
+ #include <linux/libata.h>
+-#include <linux/dmi.h>
+ #define DRV_NAME      "sata_sil"
+ #define DRV_VERSION   "2.4"
+@@ -324,7 +323,7 @@
+               prd->addr = cpu_to_le32(addr);
+               prd->flags_len = cpu_to_le32(sg_len);
+-              VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
++              VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+               last_prd = prd;
+               prd++;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/atm/fore200e.c linux-2.6.29-rc3.owrt/drivers/atm/fore200e.c
+--- linux-2.6.29.owrt/drivers/atm/fore200e.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/atm/fore200e.c       2009-05-10 23:48:28.000000000 +0200
+@@ -2519,8 +2519,8 @@
+       return err;
+     sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT);
+-    if ((err = request_firmware(&firmware, buf, device)) < 0) {
+-      printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name);
++    if (request_firmware(&firmware, buf, device) == 1) {
++      printk(FORE200E "missing %s firmware image\n", fore200e->bus->model_name);
+       return err;
+     }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/atm/lanai.c linux-2.6.29-rc3.owrt/drivers/atm/lanai.c
+--- linux-2.6.29.owrt/drivers/atm/lanai.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/atm/lanai.c  2009-05-10 23:48:28.000000000 +0200
+@@ -901,7 +901,7 @@
+               clock_l(); udelay(5);
+               for (i = 128; i != 0; i >>= 1) {   /* write command out */
+                       tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
+-                          ((data & i) ? CONFIG1_PROMDATA : 0);
++                          (data & i) ? CONFIG1_PROMDATA : 0;
+                       if (lanai->conf1 != tmp) {
+                               set_config1(tmp);
+                               udelay(5);      /* Let new data settle */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/atm/solos-pci.c linux-2.6.29-rc3.owrt/drivers/atm/solos-pci.c
+--- linux-2.6.29.owrt/drivers/atm/solos-pci.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/atm/solos-pci.c      2009-05-10 23:48:28.000000000 +0200
+@@ -685,7 +685,6 @@
+  out_release_regions:
+       pci_release_regions(dev);
+  out:
+-      kfree(card);
+       return err;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/base.h linux-2.6.29-rc3.owrt/drivers/base/base.h
+--- linux-2.6.29.owrt/drivers/base/base.h      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/base.h  2009-05-10 23:48:28.000000000 +0200
+@@ -88,6 +88,8 @@
+ extern int driver_probe_device(struct device_driver *drv, struct device *dev);
+ extern void sysdev_shutdown(void);
++extern int sysdev_suspend(pm_message_t state);
++extern int sysdev_resume(void);
+ extern char *make_class_name(const char *name, struct kobject *kobj);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/core.c linux-2.6.29-rc3.owrt/drivers/base/core.c
+--- linux-2.6.29.owrt/drivers/base/core.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/core.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1280,7 +1280,7 @@
+ /**
+  * root_device_unregister - unregister and free a root device
+- * @dev: device going away
++ * @root: device going away.
+  *
+  * This function unregisters and cleans up a device that was created by
+  * root_device_register().
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/dd.c linux-2.6.29-rc3.owrt/drivers/base/dd.c
+--- linux-2.6.29.owrt/drivers/base/dd.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/dd.c    2009-05-10 23:48:28.000000000 +0200
+@@ -18,11 +18,9 @@
+  */
+ #include <linux/device.h>
+-#include <linux/delay.h>
+ #include <linux/module.h>
+ #include <linux/kthread.h>
+ #include <linux/wait.h>
+-#include <linux/async.h>
+ #include "base.h"
+ #include "power/power.h"
+@@ -170,21 +168,6 @@
+ }
+ /**
+- * wait_for_device_probe
+- * Wait for device probing to be completed.
+- *
+- * Note: this function polls at 100 msec intervals.
+- */
+-int wait_for_device_probe(void)
+-{
+-      /* wait for the known devices to complete their probing */
+-      while (driver_probe_done() != 0)
+-              msleep(100);
+-      async_synchronize_full();
+-      return 0;
+-}
+-
+-/**
+  * driver_probe_device - attempt to bind device & driver together
+  * @drv: driver to bind a device to
+  * @dev: device to try to bind to the driver
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/node.c linux-2.6.29-rc3.owrt/drivers/base/node.c
+--- linux-2.6.29.owrt/drivers/base/node.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/node.c  2009-05-10 23:48:28.000000000 +0200
+@@ -303,7 +303,7 @@
+       sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
+       sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
+       for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
+-              int nid;
++              unsigned int nid;
+               nid = get_nid_for_pfn(pfn);
+               if (nid < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/power/main.c linux-2.6.29-rc3.owrt/drivers/base/power/main.c
+--- linux-2.6.29.owrt/drivers/base/power/main.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/power/main.c    2009-05-10 23:48:28.000000000 +0200
+@@ -333,6 +333,7 @@
+  */
+ void device_power_up(pm_message_t state)
+ {
++      sysdev_resume();
+       dpm_power_up(state);
+ }
+ EXPORT_SYMBOL_GPL(device_power_up);
+@@ -576,6 +577,8 @@
+               }
+               dev->power.status = DPM_OFF_IRQ;
+       }
++      if (!error)
++              error = sysdev_suspend(state);
+       if (error)
+               dpm_power_up(resume_event(state));
+       return error;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/base/sys.c linux-2.6.29-rc3.owrt/drivers/base/sys.c
+--- linux-2.6.29.owrt/drivers/base/sys.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/base/sys.c   2009-05-10 23:48:28.000000000 +0200
+@@ -303,6 +303,7 @@
+  *    is guaranteed by virtue of the fact that child devices are registered
+  *    after their parents.
+  */
++
+ void sysdev_shutdown(void)
+ {
+       struct sysdev_class * cls;
+@@ -362,6 +363,7 @@
+  *    This is only called by the device PM core, so we let them handle
+  *    all synchronization.
+  */
++
+ int sysdev_suspend(pm_message_t state)
+ {
+       struct sysdev_class * cls;
+@@ -430,7 +432,7 @@
+       }
+       return ret;
+ }
+-EXPORT_SYMBOL_GPL(sysdev_suspend);
++
+ /**
+  *    sysdev_resume - Bring system devices back to life.
+@@ -440,6 +442,7 @@
+  *
+  *    Note: Interrupts are disabled when called.
+  */
++
+ int sysdev_resume(void)
+ {
+       struct sysdev_class * cls;
+@@ -460,7 +463,7 @@
+       }
+       return 0;
+ }
+-EXPORT_SYMBOL_GPL(sysdev_resume);
++
+ int __init system_bus_init(void)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/aoe/aoedev.c linux-2.6.29-rc3.owrt/drivers/block/aoe/aoedev.c
+--- linux-2.6.29.owrt/drivers/block/aoe/aoedev.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/aoe/aoedev.c   2009-05-10 23:48:28.000000000 +0200
+@@ -173,7 +173,7 @@
+               return;
+       while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
+               msleep(Sms);
+-      if (i < 0) {
++      if (i <= 0) {
+               printk(KERN_ERR
+                       "aoe: %s holds ref: %s\n",
+                       skb->dev ? skb->dev->name : "netif",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/aoe/aoe.h linux-2.6.29-rc3.owrt/drivers/block/aoe/aoe.h
+--- linux-2.6.29.owrt/drivers/block/aoe/aoe.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/aoe/aoe.h      2009-05-10 23:48:28.000000000 +0200
+@@ -18,7 +18,6 @@
+ enum {
+       AOECMD_ATA,
+       AOECMD_CFG,
+-      AOECMD_VEND_MIN = 0xf0,
+       AOEFL_RSP = (1<<3),
+       AOEFL_ERR = (1<<2),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/aoe/aoenet.c linux-2.6.29-rc3.owrt/drivers/block/aoe/aoenet.c
+--- linux-2.6.29.owrt/drivers/block/aoe/aoenet.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/aoe/aoenet.c   2009-05-10 23:48:28.000000000 +0200
+@@ -142,8 +142,6 @@
+               aoecmd_cfg_rsp(skb);
+               break;
+       default:
+-              if (h->cmd >= AOECMD_VEND_MIN)
+-                      break;  /* don't complain about vendor commands */
+               printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
+       }
+ exit:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/ataflop.c linux-2.6.29-rc3.owrt/drivers/block/ataflop.c
+--- linux-2.6.29.owrt/drivers/block/ataflop.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/ataflop.c      2009-05-10 23:48:28.000000000 +0200
+@@ -1730,7 +1730,7 @@
+       timeout = jiffies + 2*HZ+HZ/2;
+       while (time_before(jiffies, timeout))
+-              if (!(st_mfp.par_dt_reg & 0x20))
++              if (!(mfp.par_dt_reg & 0x20))
+                       break;
+       status = FDC_READ( FDCREG_STATUS );
+@@ -1747,7 +1747,7 @@
+               /* dummy seek command to make WP bit accessible */
+               FDC_WRITE( FDCREG_DATA, 0 );
+               FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
+-              while( st_mfp.par_dt_reg & 0x20 )
++              while( mfp.par_dt_reg & 0x20 )
+                       ;
+               status = FDC_READ( FDCREG_STATUS );
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/cciss.c linux-2.6.29-rc3.owrt/drivers/block/cciss.c
+--- linux-2.6.29.owrt/drivers/block/cciss.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/cciss.c        2009-05-10 23:48:28.000000000 +0200
+@@ -3390,203 +3390,6 @@
+       kfree(p);
+ }
+-/* Send a message CDB to the firmware. */
+-static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+-{
+-      typedef struct {
+-              CommandListHeader_struct CommandHeader;
+-              RequestBlock_struct Request;
+-              ErrDescriptor_struct ErrorDescriptor;
+-      } Command;
+-      static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+-      Command *cmd;
+-      dma_addr_t paddr64;
+-      uint32_t paddr32, tag;
+-      void __iomem *vaddr;
+-      int i, err;
+-
+-      vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+-      if (vaddr == NULL)
+-              return -ENOMEM;
+-
+-      /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+-         CCISS commands, so they must be allocated from the lower 4GiB of
+-         memory. */
+-      err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+-      if (err) {
+-              iounmap(vaddr);
+-              return -ENOMEM;
+-      }
+-
+-      cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+-      if (cmd == NULL) {
+-              iounmap(vaddr);
+-              return -ENOMEM;
+-      }
+-
+-      /* This must fit, because of the 32-bit consistent DMA mask.  Also,
+-         although there's no guarantee, we assume that the address is at
+-         least 4-byte aligned (most likely, it's page-aligned). */
+-      paddr32 = paddr64;
+-
+-      cmd->CommandHeader.ReplyQueue = 0;
+-      cmd->CommandHeader.SGList = 0;
+-      cmd->CommandHeader.SGTotal = 0;
+-      cmd->CommandHeader.Tag.lower = paddr32;
+-      cmd->CommandHeader.Tag.upper = 0;
+-      memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+-
+-      cmd->Request.CDBLen = 16;
+-      cmd->Request.Type.Type = TYPE_MSG;
+-      cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+-      cmd->Request.Type.Direction = XFER_NONE;
+-      cmd->Request.Timeout = 0; /* Don't time out */
+-      cmd->Request.CDB[0] = opcode;
+-      cmd->Request.CDB[1] = type;
+-      memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+-
+-      cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+-      cmd->ErrorDescriptor.Addr.upper = 0;
+-      cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+-
+-      writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+-
+-      for (i = 0; i < 10; i++) {
+-              tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+-              if ((tag & ~3) == paddr32)
+-                      break;
+-              schedule_timeout_uninterruptible(HZ);
+-      }
+-
+-      iounmap(vaddr);
+-
+-      /* we leak the DMA buffer here ... no choice since the controller could
+-         still complete the command. */
+-      if (i == 10) {
+-              printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+-                      opcode, type);
+-              return -ETIMEDOUT;
+-      }
+-
+-      pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+-
+-      if (tag & 2) {
+-              printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+-                      opcode, type);
+-              return -EIO;
+-      }
+-
+-      printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+-              opcode, type);
+-      return 0;
+-}
+-
+-#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+-#define cciss_noop(p) cciss_message(p, 3, 0)
+-
+-static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+-{
+-/* the #defines are stolen from drivers/pci/msi.h. */
+-#define msi_control_reg(base)         (base + PCI_MSI_FLAGS)
+-#define PCI_MSIX_FLAGS_ENABLE         (1 << 15)
+-
+-      int pos;
+-      u16 control = 0;
+-
+-      pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+-      if (pos) {
+-              pci_read_config_word(pdev, msi_control_reg(pos), &control);
+-              if (control & PCI_MSI_FLAGS_ENABLE) {
+-                      printk(KERN_INFO "cciss: resetting MSI\n");
+-                      pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+-              }
+-      }
+-
+-      pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+-      if (pos) {
+-              pci_read_config_word(pdev, msi_control_reg(pos), &control);
+-              if (control & PCI_MSIX_FLAGS_ENABLE) {
+-                      printk(KERN_INFO "cciss: resetting MSI-X\n");
+-                      pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+-              }
+-      }
+-
+-      return 0;
+-}
+-
+-/* This does a hard reset of the controller using PCI power management
+- * states. */
+-static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+-{
+-      u16 pmcsr, saved_config_space[32];
+-      int i, pos;
+-
+-      printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+-
+-      /* This is very nearly the same thing as
+-
+-         pci_save_state(pci_dev);
+-         pci_set_power_state(pci_dev, PCI_D3hot);
+-         pci_set_power_state(pci_dev, PCI_D0);
+-         pci_restore_state(pci_dev);
+-
+-         but we can't use these nice canned kernel routines on
+-         kexec, because they also check the MSI/MSI-X state in PCI
+-         configuration space and do the wrong thing when it is
+-         set/cleared.  Also, the pci_save/restore_state functions
+-         violate the ordering requirements for restoring the
+-         configuration space from the CCISS document (see the
+-         comment below).  So we roll our own .... */
+-
+-      for (i = 0; i < 32; i++)
+-              pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+-
+-      pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+-      if (pos == 0) {
+-              printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+-              return -ENODEV;
+-      }
+-
+-      /* Quoting from the Open CISS Specification: "The Power
+-       * Management Control/Status Register (CSR) controls the power
+-       * state of the device.  The normal operating state is D0,
+-       * CSR=00h.  The software off state is D3, CSR=03h.  To reset
+-       * the controller, place the interface device in D3 then to
+-       * D0, this causes a secondary PCI reset which will reset the
+-       * controller." */
+-
+-      /* enter the D3hot power management state */
+-      pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+-      pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+-      pmcsr |= PCI_D3hot;
+-      pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+-
+-      schedule_timeout_uninterruptible(HZ >> 1);
+-
+-      /* enter the D0 power management state */
+-      pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+-      pmcsr |= PCI_D0;
+-      pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+-
+-      schedule_timeout_uninterruptible(HZ >> 1);
+-
+-      /* Restore the PCI configuration space.  The Open CISS
+-       * Specification says, "Restore the PCI Configuration
+-       * Registers, offsets 00h through 60h. It is important to
+-       * restore the command register, 16-bits at offset 04h,
+-       * last. Do not restore the configuration status register,
+-       * 16-bits at offset 06h."  Note that the offset is 2*i. */
+-      for (i = 0; i < 32; i++) {
+-              if (i == 2 || i == 3)
+-                      continue;
+-              pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+-      }
+-      wmb();
+-      pci_write_config_word(pdev, 4, saved_config_space[2]);
+-
+-      return 0;
+-}
+-
+ /*
+  *  This is it.  Find all the controllers and register them.  I really hate
+  *  stealing all these major device numbers.
+@@ -3601,26 +3404,6 @@
+       int dac, return_code;
+       InquiryData_struct *inq_buff = NULL;
+-      if (reset_devices) {
+-              /* Reset the controller with a PCI power-cycle */
+-              if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+-                      return -ENODEV;
+-
+-              /* Now try to get the controller to respond to a no-op. Some
+-                 devices (notably the HP Smart Array 5i Controller) need
+-                 up to 30 seconds to respond. */
+-              for (i=0; i<30; i++) {
+-                      if (cciss_noop(pdev) == 0)
+-                              break;
+-
+-                      schedule_timeout_uninterruptible(HZ);
+-              }
+-              if (i == 30) {
+-                      printk(KERN_ERR "cciss: controller seems dead\n");
+-                      return -EBUSY;
+-              }
+-      }
+-
+       i = alloc_cciss_hba();
+       if (i < 0)
+               return -1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/floppy.c linux-2.6.29-rc3.owrt/drivers/block/floppy.c
+--- linux-2.6.29.owrt/drivers/block/floppy.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/floppy.c       2009-05-10 23:48:28.000000000 +0200
+@@ -558,8 +558,6 @@
+ static void recalibrate_floppy(void);
+ static void floppy_shutdown(unsigned long);
+-static int floppy_request_regions(int);
+-static void floppy_release_regions(int);
+ static int floppy_grab_irq_and_dma(void);
+ static void floppy_release_irq_and_dma(void);
+@@ -4276,7 +4274,8 @@
+               FDCS->rawcmd = 2;
+               if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
+                       /* free ioports reserved by floppy_grab_irq_and_dma() */
+-                      floppy_release_regions(fdc);
++                      release_region(FDCS->address + 2, 4);
++                      release_region(FDCS->address + 7, 1);
+                       FDCS->address = -1;
+                       FDCS->version = FDC_NONE;
+                       continue;
+@@ -4285,7 +4284,8 @@
+               FDCS->version = get_fdc_version();
+               if (FDCS->version == FDC_NONE) {
+                       /* free ioports reserved by floppy_grab_irq_and_dma() */
+-                      floppy_release_regions(fdc);
++                      release_region(FDCS->address + 2, 4);
++                      release_region(FDCS->address + 7, 1);
+                       FDCS->address = -1;
+                       continue;
+               }
+@@ -4358,47 +4358,6 @@
+ static DEFINE_SPINLOCK(floppy_usage_lock);
+-static const struct io_region {
+-      int offset;
+-      int size;
+-} io_regions[] = {
+-      { 2, 1 },
+-      /* address + 3 is sometimes reserved by pnp bios for motherboard */
+-      { 4, 2 },
+-      /* address + 6 is reserved, and may be taken by IDE.
+-       * Unfortunately, Adaptec doesn't know this :-(, */
+-      { 7, 1 },
+-};
+-
+-static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+-{
+-      while (p != io_regions) {
+-              p--;
+-              release_region(FDCS->address + p->offset, p->size);
+-      }
+-}
+-
+-#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+-
+-static int floppy_request_regions(int fdc)
+-{
+-      const struct io_region *p;
+-
+-      for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+-              if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+-                      DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+-                      floppy_release_allocated_regions(fdc, p);
+-                      return -EBUSY;
+-              }
+-      }
+-      return 0;
+-}
+-
+-static void floppy_release_regions(int fdc)
+-{
+-      floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+-}
+-
+ static int floppy_grab_irq_and_dma(void)
+ {
+       unsigned long flags;
+@@ -4440,8 +4399,18 @@
+       for (fdc = 0; fdc < N_FDC; fdc++) {
+               if (FDCS->address != -1) {
+-                      if (floppy_request_regions(fdc))
+-                              goto cleanup;
++                      if (!request_region(FDCS->address + 2, 4, "floppy")) {
++                              DPRINT("Floppy io-port 0x%04lx in use\n",
++                                     FDCS->address + 2);
++                              goto cleanup1;
++                      }
++                      if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
++                              DPRINT("Floppy io-port 0x%04lx in use\n",
++                                     FDCS->address + 7);
++                              goto cleanup2;
++                      }
++                      /* address + 6 is reserved, and may be taken by IDE.
++                       * Unfortunately, Adaptec doesn't know this :-(, */
+               }
+       }
+       for (fdc = 0; fdc < N_FDC; fdc++) {
+@@ -4463,11 +4432,15 @@
+       fdc = 0;
+       irqdma_allocated = 1;
+       return 0;
+-cleanup:
++cleanup2:
++      release_region(FDCS->address + 2, 4);
++cleanup1:
+       fd_free_irq();
+       fd_free_dma();
+-      while (--fdc >= 0)
+-              floppy_release_regions(fdc);
++      while (--fdc >= 0) {
++              release_region(FDCS->address + 2, 4);
++              release_region(FDCS->address + 7, 1);
++      }
+       spin_lock_irqsave(&floppy_usage_lock, flags);
+       usage_count--;
+       spin_unlock_irqrestore(&floppy_usage_lock, flags);
+@@ -4528,8 +4501,10 @@
+ #endif
+       old_fdc = fdc;
+       for (fdc = 0; fdc < N_FDC; fdc++)
+-              if (FDCS->address != -1)
+-                      floppy_release_regions(fdc);
++              if (FDCS->address != -1) {
++                      release_region(FDCS->address + 2, 4);
++                      release_region(FDCS->address + 7, 1);
++              }
+       fdc = old_fdc;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/loop.c linux-2.6.29-rc3.owrt/drivers/block/loop.c
+--- linux-2.6.29.owrt/drivers/block/loop.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/loop.c 2009-05-10 23:48:28.000000000 +0200
+@@ -392,7 +392,8 @@
+       struct loop_device *lo = p->lo;
+       struct page *page = buf->page;
+       sector_t IV;
+-      int size, ret;
++      size_t size;
++      int ret;
+       ret = buf->ops->confirm(pipe, buf);
+       if (unlikely(ret))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/Makefile linux-2.6.29-rc3.owrt/drivers/block/Makefile
+--- linux-2.6.29.owrt/drivers/block/Makefile   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/Makefile       2009-05-10 23:48:28.000000000 +0200
+@@ -9,7 +9,6 @@
+ obj-$(CONFIG_BLK_DEV_FD)      += floppy.o
+ obj-$(CONFIG_AMIGA_FLOPPY)    += amiflop.o
+ obj-$(CONFIG_PS3_DISK)                += ps3disk.o
+-obj-$(CONFIG_PS3_VRAM)                += ps3vram.o
+ obj-$(CONFIG_ATARI_FLOPPY)    += ataflop.o
+ obj-$(CONFIG_AMIGA_Z2RAM)     += z2ram.o
+ obj-$(CONFIG_BLK_DEV_RAM)     += brd.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/nbd.c linux-2.6.29-rc3.owrt/drivers/block/nbd.c
+--- linux-2.6.29.owrt/drivers/block/nbd.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/nbd.c  2009-05-10 23:48:28.000000000 +0200
+@@ -549,15 +549,6 @@
+               BUG_ON(lo->magic != LO_MAGIC);
+-              if (unlikely(!lo->sock)) {
+-                      printk(KERN_ERR "%s: Attempted send on closed socket\n",
+-                              lo->disk->disk_name);
+-                      req->errors++;
+-                      nbd_end_request(req);
+-                      spin_lock_irq(q->queue_lock);
+-                      continue;
+-              }
+-
+               spin_lock_irq(&lo->queue_lock);
+               list_add_tail(&req->queuelist, &lo->waiting_queue);
+               spin_unlock_irq(&lo->queue_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/paride/pg.c linux-2.6.29-rc3.owrt/drivers/block/paride/pg.c
+--- linux-2.6.29.owrt/drivers/block/paride/pg.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/paride/pg.c    2009-05-10 23:48:28.000000000 +0200
+@@ -422,7 +422,7 @@
+       for (k = 0; k < len; k++) {
+               char c = *buf++;
+-              if (c != ' ' && c != l)
++              if (c != ' ' || c != l)
+                       l = *targ++ = c;
+       }
+       if (l == ' ')
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/ps3vram.c linux-2.6.29-rc3.owrt/drivers/block/ps3vram.c
+--- linux-2.6.29.owrt/drivers/block/ps3vram.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/ps3vram.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,865 +0,0 @@
+-/*
+- * ps3vram - Use extra PS3 video ram as MTD block device.
+- *
+- * Copyright 2009 Sony Corporation
+- *
+- * Based on the MTD ps3vram driver, which is
+- * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
+- * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
+- */
+-
+-#include <linux/blkdev.h>
+-#include <linux/delay.h>
+-#include <linux/proc_fs.h>
+-#include <linux/seq_file.h>
+-
+-#include <asm/firmware.h>
+-#include <asm/lv1call.h>
+-#include <asm/ps3.h>
+-
+-
+-#define DEVICE_NAME           "ps3vram"
+-
+-
+-#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
+-#define XDR_IOIF 0x0c000000
+-
+-#define FIFO_BASE XDR_IOIF
+-#define FIFO_SIZE (64 * 1024)
+-
+-#define DMA_PAGE_SIZE (4 * 1024)
+-
+-#define CACHE_PAGE_SIZE (256 * 1024)
+-#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
+-
+-#define CACHE_OFFSET CACHE_PAGE_SIZE
+-#define FIFO_OFFSET 0
+-
+-#define CTRL_PUT 0x10
+-#define CTRL_GET 0x11
+-#define CTRL_TOP 0x15
+-
+-#define UPLOAD_SUBCH  1
+-#define DOWNLOAD_SUBCH        2
+-
+-#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN  0x0000030c
+-#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY     0x00000104
+-
+-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
+-
+-#define CACHE_PAGE_PRESENT 1
+-#define CACHE_PAGE_DIRTY   2
+-
+-struct ps3vram_tag {
+-      unsigned int address;
+-      unsigned int flags;
+-};
+-
+-struct ps3vram_cache {
+-      unsigned int page_count;
+-      unsigned int page_size;
+-      struct ps3vram_tag *tags;
+-      unsigned int hit;
+-      unsigned int miss;
+-};
+-
+-struct ps3vram_priv {
+-      struct request_queue *queue;
+-      struct gendisk *gendisk;
+-
+-      u64 size;
+-
+-      u64 memory_handle;
+-      u64 context_handle;
+-      u32 *ctrl;
+-      u32 *reports;
+-      u8 __iomem *ddr_base;
+-      u8 *xdr_buf;
+-
+-      u32 *fifo_base;
+-      u32 *fifo_ptr;
+-
+-      struct ps3vram_cache cache;
+-
+-      /* Used to serialize cache/DMA operations */
+-      struct mutex lock;
+-};
+-
+-
+-static int ps3vram_major;
+-
+-
+-static struct block_device_operations ps3vram_fops = {
+-      .owner          = THIS_MODULE,
+-};
+-
+-
+-#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
+-#define DMA_NOTIFIER_OFFSET_BASE 0x1000     /* first DMA notifier offset */
+-#define DMA_NOTIFIER_SIZE        0x40
+-#define NOTIFIER 7    /* notifier used for completion report */
+-
+-static char *size = "256M";
+-module_param(size, charp, 0);
+-MODULE_PARM_DESC(size, "memory size");
+-
+-static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
+-{
+-      return (void *)reports + DMA_NOTIFIER_OFFSET_BASE +
+-             DMA_NOTIFIER_SIZE * notifier;
+-}
+-
+-static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+-      int i;
+-
+-      for (i = 0; i < 4; i++)
+-              notify[i] = 0xffffffff;
+-}
+-
+-static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
+-                               unsigned int timeout_ms)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+-      unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+-
+-      do {
+-              if (!notify[3])
+-                      return 0;
+-              msleep(1);
+-      } while (time_before(jiffies, timeout));
+-
+-      return -ETIMEDOUT;
+-}
+-
+-static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+-      priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
+-}
+-
+-static int ps3vram_wait_ring(struct ps3_system_bus_device *dev,
+-                           unsigned int timeout_ms)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+-
+-      do {
+-              if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
+-                      return 0;
+-              msleep(1);
+-      } while (time_before(jiffies, timeout));
+-
+-      dev_warn(&dev->core, "FIFO timeout (%08x/%08x/%08x)\n",
+-               priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
+-               priv->ctrl[CTRL_TOP]);
+-
+-      return -ETIMEDOUT;
+-}
+-
+-static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
+-{
+-      *(priv->fifo_ptr)++ = data;
+-}
+-
+-static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan, u32 tag,
+-                             u32 size)
+-{
+-      ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
+-}
+-
+-static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      int status;
+-
+-      ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
+-
+-      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+-
+-      /* asking the HV for a blit will kick the FIFO */
+-      status = lv1_gpu_context_attribute(priv->context_handle,
+-                                         L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+-                                         0, 0, 0);
+-      if (status)
+-              dev_err(&dev->core,
+-                      "%s: lv1_gpu_context_attribute failed %d\n", __func__,
+-                      status);
+-
+-      priv->fifo_ptr = priv->fifo_base;
+-}
+-
+-static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      int status;
+-
+-      mutex_lock(&ps3_gpu_mutex);
+-
+-      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
+-                             (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
+-
+-      /* asking the HV for a blit will kick the FIFO */
+-      status = lv1_gpu_context_attribute(priv->context_handle,
+-                                         L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+-                                         0, 0, 0);
+-      if (status)
+-              dev_err(&dev->core,
+-                      "%s: lv1_gpu_context_attribute failed %d\n", __func__,
+-                      status);
+-
+-      if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
+-          FIFO_SIZE - 1024) {
+-              dev_dbg(&dev->core, "FIFO full, rewinding\n");
+-              ps3vram_wait_ring(dev, 200);
+-              ps3vram_rewind_ring(dev);
+-      }
+-
+-      mutex_unlock(&ps3_gpu_mutex);
+-}
+-
+-static void ps3vram_bind(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
+-      ps3vram_out_ring(priv, 0x31337303);
+-      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
+-      ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+-      ps3vram_out_ring(priv, 0xfeed0001);     /* DMA system RAM instance */
+-      ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
+-
+-      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
+-      ps3vram_out_ring(priv, 0x3137c0de);
+-      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
+-      ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+-      ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
+-      ps3vram_out_ring(priv, 0xfeed0001);     /* DMA system RAM instance */
+-
+-      ps3vram_fire_ring(dev);
+-}
+-
+-static int ps3vram_upload(struct ps3_system_bus_device *dev,
+-                        unsigned int src_offset, unsigned int dst_offset,
+-                        int len, int count)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+-                         NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+-      ps3vram_out_ring(priv, XDR_IOIF + src_offset);
+-      ps3vram_out_ring(priv, dst_offset);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, count);
+-      ps3vram_out_ring(priv, (1 << 8) | 1);
+-      ps3vram_out_ring(priv, 0);
+-
+-      ps3vram_notifier_reset(dev);
+-      ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+-                         NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+-      ps3vram_out_ring(priv, 0);
+-      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
+-      ps3vram_out_ring(priv, 0);
+-      ps3vram_fire_ring(dev);
+-      if (ps3vram_notifier_wait(dev, 200) < 0) {
+-              dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+-              return -1;
+-      }
+-
+-      return 0;
+-}
+-
+-static int ps3vram_download(struct ps3_system_bus_device *dev,
+-                          unsigned int src_offset, unsigned int dst_offset,
+-                          int len, int count)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+-                         NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+-      ps3vram_out_ring(priv, src_offset);
+-      ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, len);
+-      ps3vram_out_ring(priv, count);
+-      ps3vram_out_ring(priv, (1 << 8) | 1);
+-      ps3vram_out_ring(priv, 0);
+-
+-      ps3vram_notifier_reset(dev);
+-      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+-                         NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+-      ps3vram_out_ring(priv, 0);
+-      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
+-      ps3vram_out_ring(priv, 0);
+-      ps3vram_fire_ring(dev);
+-      if (ps3vram_notifier_wait(dev, 200) < 0) {
+-              dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+-              return -1;
+-      }
+-
+-      return 0;
+-}
+-
+-static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      struct ps3vram_cache *cache = &priv->cache;
+-
+-      if (!(cache->tags[entry].flags & CACHE_PAGE_DIRTY))
+-              return;
+-
+-      dev_dbg(&dev->core, "Flushing %d: 0x%08x\n", entry,
+-              cache->tags[entry].address);
+-      if (ps3vram_upload(dev, CACHE_OFFSET + entry * cache->page_size,
+-                         cache->tags[entry].address, DMA_PAGE_SIZE,
+-                         cache->page_size / DMA_PAGE_SIZE) < 0) {
+-              dev_err(&dev->core,
+-                      "Failed to upload from 0x%x to " "0x%x size 0x%x\n",
+-                      entry * cache->page_size, cache->tags[entry].address,
+-                      cache->page_size);
+-      }
+-      cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
+-}
+-
+-static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
+-                             unsigned int address)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      struct ps3vram_cache *cache = &priv->cache;
+-
+-      dev_dbg(&dev->core, "Fetching %d: 0x%08x\n", entry, address);
+-      if (ps3vram_download(dev, address,
+-                           CACHE_OFFSET + entry * cache->page_size,
+-                           DMA_PAGE_SIZE,
+-                           cache->page_size / DMA_PAGE_SIZE) < 0) {
+-              dev_err(&dev->core,
+-                      "Failed to download from 0x%x to 0x%x size 0x%x\n",
+-                      address, entry * cache->page_size, cache->page_size);
+-      }
+-
+-      cache->tags[entry].address = address;
+-      cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
+-}
+-
+-
+-static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      struct ps3vram_cache *cache = &priv->cache;
+-      int i;
+-
+-      dev_dbg(&dev->core, "FLUSH\n");
+-      for (i = 0; i < cache->page_count; i++) {
+-              ps3vram_cache_evict(dev, i);
+-              cache->tags[i].flags = 0;
+-      }
+-}
+-
+-static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
+-                                      loff_t address)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      struct ps3vram_cache *cache = &priv->cache;
+-      unsigned int base;
+-      unsigned int offset;
+-      int i;
+-      static int counter;
+-
+-      offset = (unsigned int) (address & (cache->page_size - 1));
+-      base = (unsigned int) (address - offset);
+-
+-      /* fully associative check */
+-      for (i = 0; i < cache->page_count; i++) {
+-              if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
+-                  cache->tags[i].address == base) {
+-                      cache->hit++;
+-                      dev_dbg(&dev->core, "Found entry %d: 0x%08x\n", i,
+-                              cache->tags[i].address);
+-                      return i;
+-              }
+-      }
+-
+-      /* choose a random entry */
+-      i = (jiffies + (counter++)) % cache->page_count;
+-      dev_dbg(&dev->core, "Using entry %d\n", i);
+-
+-      ps3vram_cache_evict(dev, i);
+-      ps3vram_cache_load(dev, i, base);
+-
+-      cache->miss++;
+-      return i;
+-}
+-
+-static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      priv->cache.page_count = CACHE_PAGE_COUNT;
+-      priv->cache.page_size = CACHE_PAGE_SIZE;
+-      priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
+-                                 CACHE_PAGE_COUNT, GFP_KERNEL);
+-      if (priv->cache.tags == NULL) {
+-              dev_err(&dev->core, "Could not allocate cache tags\n");
+-              return -ENOMEM;
+-      }
+-
+-      dev_info(&dev->core, "Created ram cache: %d entries, %d KiB each\n",
+-              CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
+-
+-      return 0;
+-}
+-
+-static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      ps3vram_cache_flush(dev);
+-      kfree(priv->cache.tags);
+-}
+-
+-static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
+-                      size_t len, size_t *retlen, u_char *buf)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      unsigned int cached, count;
+-
+-      dev_dbg(&dev->core, "%s: from=0x%08x len=0x%zx\n", __func__,
+-              (unsigned int)from, len);
+-
+-      if (from >= priv->size)
+-              return -EIO;
+-
+-      if (len > priv->size - from)
+-              len = priv->size - from;
+-
+-      /* Copy from vram to buf */
+-      count = len;
+-      while (count) {
+-              unsigned int offset, avail;
+-              unsigned int entry;
+-
+-              offset = (unsigned int) (from & (priv->cache.page_size - 1));
+-              avail  = priv->cache.page_size - offset;
+-
+-              mutex_lock(&priv->lock);
+-
+-              entry = ps3vram_cache_match(dev, from);
+-              cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+-
+-              dev_dbg(&dev->core, "%s: from=%08x cached=%08x offset=%08x "
+-                      "avail=%08x count=%08x\n", __func__,
+-                      (unsigned int)from, cached, offset, avail, count);
+-
+-              if (avail > count)
+-                      avail = count;
+-              memcpy(buf, priv->xdr_buf + cached, avail);
+-
+-              mutex_unlock(&priv->lock);
+-
+-              buf += avail;
+-              count -= avail;
+-              from += avail;
+-      }
+-
+-      *retlen = len;
+-      return 0;
+-}
+-
+-static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
+-                       size_t len, size_t *retlen, const u_char *buf)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      unsigned int cached, count;
+-
+-      if (to >= priv->size)
+-              return -EIO;
+-
+-      if (len > priv->size - to)
+-              len = priv->size - to;
+-
+-      /* Copy from buf to vram */
+-      count = len;
+-      while (count) {
+-              unsigned int offset, avail;
+-              unsigned int entry;
+-
+-              offset = (unsigned int) (to & (priv->cache.page_size - 1));
+-              avail  = priv->cache.page_size - offset;
+-
+-              mutex_lock(&priv->lock);
+-
+-              entry = ps3vram_cache_match(dev, to);
+-              cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+-
+-              dev_dbg(&dev->core, "%s: to=%08x cached=%08x offset=%08x "
+-                      "avail=%08x count=%08x\n", __func__, (unsigned int)to,
+-                      cached, offset, avail, count);
+-
+-              if (avail > count)
+-                      avail = count;
+-              memcpy(priv->xdr_buf + cached, buf, avail);
+-
+-              priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
+-
+-              mutex_unlock(&priv->lock);
+-
+-              buf += avail;
+-              count -= avail;
+-              to += avail;
+-      }
+-
+-      *retlen = len;
+-      return 0;
+-}
+-
+-static int ps3vram_proc_show(struct seq_file *m, void *v)
+-{
+-      struct ps3vram_priv *priv = m->private;
+-
+-      seq_printf(m, "hit:%u\nmiss:%u\n", priv->cache.hit, priv->cache.miss);
+-      return 0;
+-}
+-
+-static int ps3vram_proc_open(struct inode *inode, struct file *file)
+-{
+-      return single_open(file, ps3vram_proc_show, PDE(inode)->data);
+-}
+-
+-static const struct file_operations ps3vram_proc_fops = {
+-      .owner          = THIS_MODULE,
+-      .open           = ps3vram_proc_open,
+-      .read           = seq_read,
+-      .llseek         = seq_lseek,
+-      .release        = single_release,
+-};
+-
+-static void __devinit ps3vram_proc_init(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-      struct proc_dir_entry *pde;
+-
+-      pde = proc_create(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops);
+-      if (!pde) {
+-              dev_warn(&dev->core, "failed to create /proc entry\n");
+-              return;
+-      }
+-
+-      pde->owner = THIS_MODULE;
+-      pde->data = priv;
+-}
+-
+-static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+-{
+-      struct ps3_system_bus_device *dev = q->queuedata;
+-      int write = bio_data_dir(bio) == WRITE;
+-      const char *op = write ? "write" : "read";
+-      loff_t offset = bio->bi_sector << 9;
+-      int error = 0;
+-      struct bio_vec *bvec;
+-      unsigned int i;
+-
+-      dev_dbg(&dev->core, "%s\n", __func__);
+-
+-      bio_for_each_segment(bvec, bio, i) {
+-              /* PS3 is ppc64, so we don't handle highmem */
+-              char *ptr = page_address(bvec->bv_page) + bvec->bv_offset;
+-              size_t len = bvec->bv_len, retlen;
+-
+-              dev_dbg(&dev->core, "    %s %zu bytes at offset %llu\n", op,
+-                      len, offset);
+-              if (write)
+-                      error = ps3vram_write(dev, offset, len, &retlen, ptr);
+-              else
+-                      error = ps3vram_read(dev, offset, len, &retlen, ptr);
+-
+-              if (error) {
+-                      dev_err(&dev->core, "%s failed\n", op);
+-                      goto out;
+-              }
+-
+-              if (retlen != len) {
+-                      dev_err(&dev->core, "Short %s\n", op);
+-                      goto out;
+-              }
+-
+-              offset += len;
+-      }
+-
+-      dev_dbg(&dev->core, "%s completed\n", op);
+-
+-out:
+-      bio_endio(bio, error);
+-      return 0;
+-}
+-
+-static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv;
+-      int error, status;
+-      struct request_queue *queue;
+-      struct gendisk *gendisk;
+-      u64 ddr_lpar, ctrl_lpar, info_lpar, reports_lpar, ddr_size,
+-          reports_size;
+-      char *rest;
+-
+-      priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+-      if (!priv) {
+-              error = -ENOMEM;
+-              goto fail;
+-      }
+-
+-      mutex_init(&priv->lock);
+-      dev->core.driver_data = priv;
+-
+-      priv = dev->core.driver_data;
+-
+-      /* Allocate XDR buffer (1MiB aligned) */
+-      priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
+-              get_order(XDR_BUF_SIZE));
+-      if (priv->xdr_buf == NULL) {
+-              dev_err(&dev->core, "Could not allocate XDR buffer\n");
+-              error = -ENOMEM;
+-              goto fail_free_priv;
+-      }
+-
+-      /* Put FIFO at begginning of XDR buffer */
+-      priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
+-      priv->fifo_ptr = priv->fifo_base;
+-
+-      /* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
+-      if (ps3_open_hv_device(dev)) {
+-              dev_err(&dev->core, "ps3_open_hv_device failed\n");
+-              error = -EAGAIN;
+-              goto out_close_gpu;
+-      }
+-
+-      /* Request memory */
+-      status = -1;
+-      ddr_size = ALIGN(memparse(size, &rest), 1024*1024);
+-      if (!ddr_size) {
+-              dev_err(&dev->core, "Specified size is too small\n");
+-              error = -EINVAL;
+-              goto out_close_gpu;
+-      }
+-
+-      while (ddr_size > 0) {
+-              status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
+-                                               &priv->memory_handle,
+-                                               &ddr_lpar);
+-              if (!status)
+-                      break;
+-              ddr_size -= 1024*1024;
+-      }
+-      if (status) {
+-              dev_err(&dev->core, "lv1_gpu_memory_allocate failed %d\n",
+-                      status);
+-              error = -ENOMEM;
+-              goto out_free_xdr_buf;
+-      }
+-
+-      /* Request context */
+-      status = lv1_gpu_context_allocate(priv->memory_handle, 0,
+-                                        &priv->context_handle, &ctrl_lpar,
+-                                        &info_lpar, &reports_lpar,
+-                                        &reports_size);
+-      if (status) {
+-              dev_err(&dev->core, "lv1_gpu_context_allocate failed %d\n",
+-                      status);
+-              error = -ENOMEM;
+-              goto out_free_memory;
+-      }
+-
+-      /* Map XDR buffer to RSX */
+-      status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
+-                                     ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
+-                                     XDR_BUF_SIZE, 0);
+-      if (status) {
+-              dev_err(&dev->core, "lv1_gpu_context_iomap failed %d\n",
+-                      status);
+-              error = -ENOMEM;
+-              goto out_free_context;
+-      }
+-
+-      priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
+-
+-      if (!priv->ddr_base) {
+-              dev_err(&dev->core, "ioremap DDR failed\n");
+-              error = -ENOMEM;
+-              goto out_free_context;
+-      }
+-
+-      priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
+-      if (!priv->ctrl) {
+-              dev_err(&dev->core, "ioremap CTRL failed\n");
+-              error = -ENOMEM;
+-              goto out_unmap_vram;
+-      }
+-
+-      priv->reports = ioremap(reports_lpar, reports_size);
+-      if (!priv->reports) {
+-              dev_err(&dev->core, "ioremap REPORTS failed\n");
+-              error = -ENOMEM;
+-              goto out_unmap_ctrl;
+-      }
+-
+-      mutex_lock(&ps3_gpu_mutex);
+-      ps3vram_init_ring(dev);
+-      mutex_unlock(&ps3_gpu_mutex);
+-
+-      priv->size = ddr_size;
+-
+-      ps3vram_bind(dev);
+-
+-      mutex_lock(&ps3_gpu_mutex);
+-      error = ps3vram_wait_ring(dev, 100);
+-      mutex_unlock(&ps3_gpu_mutex);
+-      if (error < 0) {
+-              dev_err(&dev->core, "Failed to initialize channels\n");
+-              error = -ETIMEDOUT;
+-              goto out_unmap_reports;
+-      }
+-
+-      ps3vram_cache_init(dev);
+-      ps3vram_proc_init(dev);
+-
+-      queue = blk_alloc_queue(GFP_KERNEL);
+-      if (!queue) {
+-              dev_err(&dev->core, "blk_alloc_queue failed\n");
+-              error = -ENOMEM;
+-              goto out_cache_cleanup;
+-      }
+-
+-      priv->queue = queue;
+-      queue->queuedata = dev;
+-      blk_queue_make_request(queue, ps3vram_make_request);
+-      blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS);
+-      blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS);
+-      blk_queue_max_segment_size(queue, MAX_SEGMENT_SIZE);
+-      blk_queue_max_sectors(queue, SAFE_MAX_SECTORS);
+-
+-      gendisk = alloc_disk(1);
+-      if (!gendisk) {
+-              dev_err(&dev->core, "alloc_disk failed\n");
+-              error = -ENOMEM;
+-              goto fail_cleanup_queue;
+-      }
+-
+-      priv->gendisk = gendisk;
+-      gendisk->major = ps3vram_major;
+-      gendisk->first_minor = 0;
+-      gendisk->fops = &ps3vram_fops;
+-      gendisk->queue = queue;
+-      gendisk->private_data = dev;
+-      gendisk->driverfs_dev = &dev->core;
+-      strlcpy(gendisk->disk_name, DEVICE_NAME, sizeof(gendisk->disk_name));
+-      set_capacity(gendisk, priv->size >> 9);
+-
+-      dev_info(&dev->core, "%s: Using %lu MiB of GPU memory\n",
+-               gendisk->disk_name, get_capacity(gendisk) >> 11);
+-
+-      add_disk(gendisk);
+-      return 0;
+-
+-fail_cleanup_queue:
+-      blk_cleanup_queue(queue);
+-out_cache_cleanup:
+-      remove_proc_entry(DEVICE_NAME, NULL);
+-      ps3vram_cache_cleanup(dev);
+-out_unmap_reports:
+-      iounmap(priv->reports);
+-out_unmap_ctrl:
+-      iounmap(priv->ctrl);
+-out_unmap_vram:
+-      iounmap(priv->ddr_base);
+-out_free_context:
+-      lv1_gpu_context_free(priv->context_handle);
+-out_free_memory:
+-      lv1_gpu_memory_free(priv->memory_handle);
+-out_close_gpu:
+-      ps3_close_hv_device(dev);
+-out_free_xdr_buf:
+-      free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+-fail_free_priv:
+-      kfree(priv);
+-      dev->core.driver_data = NULL;
+-fail:
+-      return error;
+-}
+-
+-static int ps3vram_remove(struct ps3_system_bus_device *dev)
+-{
+-      struct ps3vram_priv *priv = dev->core.driver_data;
+-
+-      del_gendisk(priv->gendisk);
+-      put_disk(priv->gendisk);
+-      blk_cleanup_queue(priv->queue);
+-      remove_proc_entry(DEVICE_NAME, NULL);
+-      ps3vram_cache_cleanup(dev);
+-      iounmap(priv->reports);
+-      iounmap(priv->ctrl);
+-      iounmap(priv->ddr_base);
+-      lv1_gpu_context_free(priv->context_handle);
+-      lv1_gpu_memory_free(priv->memory_handle);
+-      ps3_close_hv_device(dev);
+-      free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+-      kfree(priv);
+-      dev->core.driver_data = NULL;
+-      return 0;
+-}
+-
+-static struct ps3_system_bus_driver ps3vram = {
+-      .match_id       = PS3_MATCH_ID_GPU,
+-      .match_sub_id   = PS3_MATCH_SUB_ID_GPU_RAMDISK,
+-      .core.name      = DEVICE_NAME,
+-      .core.owner     = THIS_MODULE,
+-      .probe          = ps3vram_probe,
+-      .remove         = ps3vram_remove,
+-      .shutdown       = ps3vram_remove,
+-};
+-
+-
+-static int __init ps3vram_init(void)
+-{
+-      int error;
+-
+-      if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+-              return -ENODEV;
+-
+-      error = register_blkdev(0, DEVICE_NAME);
+-      if (error <= 0) {
+-              pr_err("%s: register_blkdev failed %d\n", DEVICE_NAME, error);
+-              return error;
+-      }
+-      ps3vram_major = error;
+-
+-      pr_info("%s: registered block device major %d\n", DEVICE_NAME,
+-              ps3vram_major);
+-
+-      error = ps3_system_bus_driver_register(&ps3vram);
+-      if (error)
+-              unregister_blkdev(ps3vram_major, DEVICE_NAME);
+-
+-      return error;
+-}
+-
+-static void __exit ps3vram_exit(void)
+-{
+-      ps3_system_bus_driver_unregister(&ps3vram);
+-      unregister_blkdev(ps3vram_major, DEVICE_NAME);
+-}
+-
+-module_init(ps3vram_init);
+-module_exit(ps3vram_exit);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("PS3 Video RAM Storage Driver");
+-MODULE_AUTHOR("Sony Corporation");
+-MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/xen-blkfront.c linux-2.6.29-rc3.owrt/drivers/block/xen-blkfront.c
+--- linux-2.6.29.owrt/drivers/block/xen-blkfront.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/xen-blkfront.c 2009-05-10 23:48:28.000000000 +0200
+@@ -40,7 +40,6 @@
+ #include <linux/hdreg.h>
+ #include <linux/cdrom.h>
+ #include <linux/module.h>
+-#include <linux/scatterlist.h>
+ #include <xen/xenbus.h>
+ #include <xen/grant_table.h>
+@@ -83,7 +82,6 @@
+       enum blkif_state connected;
+       int ring_ref;
+       struct blkif_front_ring ring;
+-      struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+       unsigned int evtchn, irq;
+       struct request_queue *rq;
+       struct work_struct work;
+@@ -206,11 +204,12 @@
+       struct blkfront_info *info = req->rq_disk->private_data;
+       unsigned long buffer_mfn;
+       struct blkif_request *ring_req;
++      struct req_iterator iter;
++      struct bio_vec *bvec;
+       unsigned long id;
+       unsigned int fsect, lsect;
+-      int i, ref;
++      int ref;
+       grant_ref_t gref_head;
+-      struct scatterlist *sg;
+       if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
+               return 1;
+@@ -239,13 +238,12 @@
+       if (blk_barrier_rq(req))
+               ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+-      ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+-      BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+-
+-      for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+-              buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+-              fsect = sg->offset >> 9;
+-              lsect = fsect + (sg->length >> 9) - 1;
++      ring_req->nr_segments = 0;
++      rq_for_each_segment(bvec, req, iter) {
++              BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
++              buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
++              fsect = bvec->bv_offset >> 9;
++              lsect = fsect + (bvec->bv_len >> 9) - 1;
+               /* install a grant reference. */
+               ref = gnttab_claim_grant_reference(&gref_head);
+               BUG_ON(ref == -ENOSPC);
+@@ -256,12 +254,16 @@
+                               buffer_mfn,
+                               rq_data_dir(req) );
+-              info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+-              ring_req->seg[i] =
++              info->shadow[id].frame[ring_req->nr_segments] =
++                              mfn_to_pfn(buffer_mfn);
++
++              ring_req->seg[ring_req->nr_segments] =
+                               (struct blkif_request_segment) {
+                                       .gref       = ref,
+                                       .first_sect = fsect,
+                                       .last_sect  = lsect };
++
++              ring_req->nr_segments++;
+       }
+       info->ring.req_prod_pvt++;
+@@ -620,8 +622,6 @@
+       SHARED_RING_INIT(sring);
+       FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
+-      sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+-
+       err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
+       if (err < 0) {
+               free_page((unsigned long)sring);
+@@ -977,8 +977,6 @@
+               break;
+       case XenbusStateClosing:
+-              if (info->gd == NULL)
+-                      xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+               bd = bdget_disk(info->gd, 0);
+               if (bd == NULL)
+                       xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/block/xsysace.c linux-2.6.29-rc3.owrt/drivers/block/xsysace.c
+--- linux-2.6.29.owrt/drivers/block/xsysace.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/block/xsysace.c      2009-05-10 23:48:28.000000000 +0200
+@@ -489,28 +489,6 @@
+               ace->fsm_state, ace->id_req_count);
+ #endif
+-      /* Verify that there is actually a CF in the slot. If not, then
+-       * bail out back to the idle state and wake up all the waiters */
+-      status = ace_in32(ace, ACE_STATUS);
+-      if ((status & ACE_STATUS_CFDETECT) == 0) {
+-              ace->fsm_state = ACE_FSM_STATE_IDLE;
+-              ace->media_change = 1;
+-              set_capacity(ace->gd, 0);
+-              dev_info(ace->dev, "No CF in slot\n");
+-
+-              /* Drop all pending requests */
+-              while ((req = elv_next_request(ace->queue)) != NULL)
+-                      end_request(req, 0);
+-
+-              /* Drop back to IDLE state and notify waiters */
+-              ace->fsm_state = ACE_FSM_STATE_IDLE;
+-              ace->id_result = -EIO;
+-              while (ace->id_req_count) {
+-                      complete(&ace->id_completion);
+-                      ace->id_req_count--;
+-              }
+-      }
+-
+       switch (ace->fsm_state) {
+       case ACE_FSM_STATE_IDLE:
+               /* See if there is anything to do */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/agp/amd64-agp.c linux-2.6.29-rc3.owrt/drivers/char/agp/amd64-agp.c
+--- linux-2.6.29.owrt/drivers/char/agp/amd64-agp.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/agp/amd64-agp.c 2009-05-10 23:48:28.000000000 +0200
+@@ -271,15 +271,15 @@
+       nb_order = (nb_order >> 1) & 7;
+       pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
+       nb_aper = nb_base << 25;
++      if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
++              return 0;
++      }
+       /* Northbridge seems to contain crap. Try the AGP bridge. */
+       pci_read_config_word(agp, cap+0x14, &apsize);
+-      if (apsize == 0xffff) {
+-              if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+-                      return 0;
++      if (apsize == 0xffff)
+               return -1;
+-      }
+       apsize &= 0xfff;
+       /* Some BIOS use weird encodings not in the AGPv3 table. */
+@@ -301,11 +301,6 @@
+               order = nb_order;
+       }
+-      if (nb_order >= order) {
+-              if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+-                      return 0;
+-      }
+-
+       dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+                aper, 32 << order);
+       if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/agp/intel-agp.c linux-2.6.29-rc3.owrt/drivers/char/agp/intel-agp.c
+--- linux-2.6.29.owrt/drivers/char/agp/intel-agp.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/agp/intel-agp.c 2009-05-10 23:48:28.000000000 +0200
+@@ -633,15 +633,13 @@
+                       break;
+               }
+       }
+-      if (gtt_entries > 0) {
++      if (gtt_entries > 0)
+               dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
+                      gtt_entries / KB(1), local ? "local" : "stolen");
+-              gtt_entries /= KB(4);
+-      } else {
++      else
+               dev_info(&agp_bridge->dev->dev,
+                      "no pre-allocated video memory detected\n");
+-              gtt_entries = 0;
+-      }
++      gtt_entries /= KB(4);
+       intel_private.gtt_entries = gtt_entries;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/agp/parisc-agp.c linux-2.6.29-rc3.owrt/drivers/char/agp/parisc-agp.c
+--- linux-2.6.29.owrt/drivers/char/agp/parisc-agp.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/agp/parisc-agp.c        2009-05-10 23:48:28.000000000 +0200
+@@ -359,16 +359,9 @@
+       return error;
+ }
+-static int
+-find_quicksilver(struct device *dev, void *data)
+-{
+-      struct parisc_device **lba = data;
+-      struct parisc_device *padev = to_parisc_device(dev);
+-
+-      if (IS_QUICKSILVER(padev))
+-              *lba = padev;
+-
+-      return 0;
++static struct device *next_device(struct klist_iter *i) {
++      struct klist_node * n = klist_next(i);
++      return n ? container_of(n, struct device, knode_parent) : NULL;
+ }
+ static int
+@@ -379,6 +372,8 @@
+       int err = -1;
+       struct parisc_device *sba = NULL, *lba = NULL;
+       struct lba_device *lbadev = NULL;
++      struct device *dev = NULL;
++      struct klist_iter i;
+       if (!sba_list)
+               goto out;
+@@ -391,7 +386,13 @@
+       }
+       /* Now search our Pluto for our precious AGP device... */
+-      device_for_each_child(&sba->dev, &lba, find_quicksilver);
++      klist_iter_init(&sba->dev.klist_children, &i);
++      while ((dev = next_device(&i))) {
++              struct parisc_device *padev = to_parisc_device(dev);
++              if (IS_QUICKSILVER(padev))
++                      lba = padev;
++      }
++      klist_iter_exit(&i);
+       if (!lba) {
+               printk(KERN_INFO DRVPFX "No AGP devices found.\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/hvcs.c linux-2.6.29-rc3.owrt/drivers/char/hvcs.c
+--- linux-2.6.29.owrt/drivers/char/hvcs.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/hvcs.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1139,6 +1139,15 @@
+       hvcsd->tty = tty;
+       tty->driver_data = hvcsd;
++      /*
++       * Set this driver to low latency so that we actually have a chance at
++       * catching a throttled TTY after we flip_buffer_push.  Otherwise the
++       * flush_to_async may not execute until after the kernel_thread has
++       * yielded and resumed the next flip_buffer_push resulting in data
++       * loss.
++       */
++      tty->low_latency = 1;
++
+       memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/hvsi.c linux-2.6.29-rc3.owrt/drivers/char/hvsi.c
+--- linux-2.6.29.owrt/drivers/char/hvsi.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/hvsi.c  2009-05-10 23:48:28.000000000 +0200
+@@ -810,6 +810,7 @@
+       hp = &hvsi_ports[line];
+       tty->driver_data = hp;
++      tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
+       mb();
+       if (hp->state == HVSI_FSP_DIED)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/Kconfig linux-2.6.29-rc3.owrt/drivers/char/Kconfig
+--- linux-2.6.29.owrt/drivers/char/Kconfig     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/Kconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -761,7 +761,7 @@
+ config NVRAM
+       tristate "/dev/nvram support"
+-      depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
++      depends on ATARI || X86 || ARM || GENERIC_NVRAM
+       ---help---
+         If you say Y here and create a character special file /dev/nvram
+         with major number 10 and minor number 144 using mknod ("man mknod"),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/scc.h linux-2.6.29-rc3.owrt/drivers/char/scc.h
+--- linux-2.6.29.owrt/drivers/char/scc.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/scc.h   2009-05-10 23:48:28.000000000 +0200
+@@ -387,7 +387,7 @@
+ /* The SCC needs 3.5 PCLK cycles recovery time between to register
+  * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
+  * 125 ns = 437.5 ns. This is too short for udelay().
+- * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
++ * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be
+  * quite right
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/selection.c linux-2.6.29-rc3.owrt/drivers/char/selection.c
+--- linux-2.6.29.owrt/drivers/char/selection.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/selection.c     2009-05-10 23:48:28.000000000 +0200
+@@ -268,7 +268,7 @@
+       /* Allocate a new buffer before freeing the old one ... */
+       multiplier = use_unicode ? 3 : 1;  /* chars can take up to 3 bytes */
+-      bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL);
++      bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
+       if (!bp) {
+               printk(KERN_WARNING "selection: kmalloc() failed\n");
+               clear_selection();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/sx.c linux-2.6.29-rc3.owrt/drivers/char/sx.c
+--- linux-2.6.29.owrt/drivers/char/sx.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/sx.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1713,8 +1713,8 @@
+               for (i = 0; i < SX_NBOARDS; i++)
+                       sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
+               sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
+-              rc = -EIO;
+-              goto out;
++              unlock_kernel();
++              return -EIO;
+       }
+       switch (cmd) {
+@@ -1746,10 +1746,8 @@
+               sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
+               break;
+       case SXIO_DO_RAMTEST:
+-              if (sx_initialized) {   /* Already initialized: better not ramtest the board.  */
+-                      rc = -EPERM;
+-                      break;
+-              }
++              if (sx_initialized)     /* Already initialized: better not ramtest the board.  */
++                      return -EPERM;
+               if (IS_SX_BOARD(board)) {
+                       rc = do_memtest(board, 0, 0x7000);
+                       if (!rc)
+@@ -1789,7 +1787,7 @@
+                                               nbytes - i : SX_CHUNK_SIZE)) {
+                                       kfree(tmp);
+                                       rc = -EFAULT;
+-                                      goto out;
++                                      break;
+                               }
+                               memcpy_toio(board->base2 + offset + i, tmp,
+                                               (i + SX_CHUNK_SIZE > nbytes) ?
+@@ -1846,7 +1844,6 @@
+               rc = -ENOTTY;
+               break;
+       }
+-out:
+       unlock_kernel();
+       func_exit();
+       return rc;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/char/tpm/tpm_infineon.c linux-2.6.29-rc3.owrt/drivers/char/tpm/tpm_infineon.c
+--- linux-2.6.29.owrt/drivers/char/tpm/tpm_infineon.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/char/tpm/tpm_infineon.c      2009-05-10 23:48:28.000000000 +0200
+@@ -4,7 +4,7 @@
+  * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
+  * Specifications at www.trustedcomputinggroup.org
+  *
+- * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
++ * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de>
+  * Sirrix AG - security technologies, http://www.sirrix.com and
+  * Applied Data Security Group, Ruhr-University Bochum, Germany
+  * Project-Homepage: http://www.prosec.rub.de/tpm
+@@ -636,7 +636,7 @@
+ module_init(init_inf);
+ module_exit(cleanup_inf);
+-MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
++MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
+ MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
+ MODULE_VERSION("1.9");
+ MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/cpufreq/cpufreq.c linux-2.6.29-rc3.owrt/drivers/cpufreq/cpufreq.c
+--- linux-2.6.29.owrt/drivers/cpufreq/cpufreq.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/cpufreq/cpufreq.c    2009-05-10 23:48:28.000000000 +0200
+@@ -754,6 +754,11 @@
+       .release        = cpufreq_sysfs_release,
+ };
++static struct kobj_type ktype_empty_cpufreq = {
++      .sysfs_ops      = &sysfs_ops,
++      .release        = cpufreq_sysfs_release,
++};
++
+ /**
+  * cpufreq_add_dev - add a CPU device
+@@ -887,26 +892,36 @@
+       memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
+       /* prepare interface data */
+-      ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+-                                 "cpufreq");
+-      if (ret)
+-              goto err_out_driver_exit;
+-
+-      /* set up files for this cpu device */
+-      drv_attr = cpufreq_driver->attr;
+-      while ((drv_attr) && (*drv_attr)) {
+-              ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
++      if (!cpufreq_driver->hide_interface) {
++              ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
++                                         &sys_dev->kobj, "cpufreq");
+               if (ret)
+                       goto err_out_driver_exit;
+-              drv_attr++;
+-      }
+-      if (cpufreq_driver->get) {
+-              ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+-              if (ret)
+-                      goto err_out_driver_exit;
+-      }
+-      if (cpufreq_driver->target) {
+-              ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
++
++              /* set up files for this cpu device */
++              drv_attr = cpufreq_driver->attr;
++              while ((drv_attr) && (*drv_attr)) {
++                      ret = sysfs_create_file(&policy->kobj,
++                                              &((*drv_attr)->attr));
++                      if (ret)
++                              goto err_out_driver_exit;
++                      drv_attr++;
++              }
++              if (cpufreq_driver->get) {
++                      ret = sysfs_create_file(&policy->kobj,
++                                              &cpuinfo_cur_freq.attr);
++                      if (ret)
++                              goto err_out_driver_exit;
++              }
++              if (cpufreq_driver->target) {
++                      ret = sysfs_create_file(&policy->kobj,
++                                              &scaling_cur_freq.attr);
++                      if (ret)
++                              goto err_out_driver_exit;
++              }
++      } else {
++              ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
++                                         &sys_dev->kobj, "cpufreq");
+               if (ret)
+                       goto err_out_driver_exit;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/cpufreq/cpufreq_ondemand.c linux-2.6.29-rc3.owrt/drivers/cpufreq/cpufreq_ondemand.c
+--- linux-2.6.29.owrt/drivers/cpufreq/cpufreq_ondemand.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/cpufreq/cpufreq_ondemand.c   2009-05-10 23:48:28.000000000 +0200
+@@ -117,7 +117,11 @@
+       busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq);
+       busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq);
+       busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal);
+-      busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.nice);
++
++      if (!dbs_tuners_ins.ignore_nice) {
++              busy_time = cputime64_add(busy_time,
++                              kstat_cpu(cpu).cpustat.nice);
++      }
+       idle_time = cputime64_sub(cur_wall_time, busy_time);
+       if (wall)
+@@ -133,6 +137,23 @@
+       if (idle_time == -1ULL)
+               return get_cpu_idle_time_jiffy(cpu, wall);
++      if (dbs_tuners_ins.ignore_nice) {
++              cputime64_t cur_nice;
++              unsigned long cur_nice_jiffies;
++              struct cpu_dbs_info_s *dbs_info;
++
++              dbs_info = &per_cpu(cpu_dbs_info, cpu);
++              cur_nice = cputime64_sub(kstat_cpu(cpu).cpustat.nice,
++                                       dbs_info->prev_cpu_nice);
++              /*
++               * Assumption: nice time between sampling periods will be
++               * less than 2^32 jiffies for 32 bit sys
++               */
++              cur_nice_jiffies = (unsigned long)
++                                      cputime64_to_jiffies64(cur_nice);
++              dbs_info->prev_cpu_nice = kstat_cpu(cpu).cpustat.nice;
++              return idle_time + jiffies_to_usecs(cur_nice_jiffies);
++      }
+       return idle_time;
+ }
+@@ -298,9 +319,6 @@
+               dbs_info = &per_cpu(cpu_dbs_info, j);
+               dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
+                                               &dbs_info->prev_cpu_wall);
+-              if (dbs_tuners_ins.ignore_nice)
+-                      dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice;
+-
+       }
+       mutex_unlock(&dbs_mutex);
+@@ -401,23 +419,6 @@
+                               j_dbs_info->prev_cpu_idle);
+               j_dbs_info->prev_cpu_idle = cur_idle_time;
+-              if (dbs_tuners_ins.ignore_nice) {
+-                      cputime64_t cur_nice;
+-                      unsigned long cur_nice_jiffies;
+-
+-                      cur_nice = cputime64_sub(kstat_cpu(j).cpustat.nice,
+-                                       j_dbs_info->prev_cpu_nice);
+-                      /*
+-                       * Assumption: nice time between sampling periods will
+-                       * be less than 2^32 jiffies for 32 bit sys
+-                       */
+-                      cur_nice_jiffies = (unsigned long)
+-                                      cputime64_to_jiffies64(cur_nice);
+-
+-                      j_dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice;
+-                      idle_time += jiffies_to_usecs(cur_nice_jiffies);
+-              }
+-
+               if (unlikely(!wall_time || wall_time < idle_time))
+                       continue;
+@@ -574,10 +575,6 @@
+                       j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
+                                               &j_dbs_info->prev_cpu_wall);
+-                      if (dbs_tuners_ins.ignore_nice) {
+-                              j_dbs_info->prev_cpu_nice =
+-                                              kstat_cpu(j).cpustat.nice;
+-                      }
+               }
+               this_dbs_info->cpu = cpu;
+               /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/crypto/ixp4xx_crypto.c linux-2.6.29-rc3.owrt/drivers/crypto/ixp4xx_crypto.c
+--- linux-2.6.29.owrt/drivers/crypto/ixp4xx_crypto.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/crypto/ixp4xx_crypto.c       2009-05-10 23:48:28.000000000 +0200
+@@ -457,12 +457,10 @@
+       if (!ctx_pool) {
+               goto err;
+       }
+-      ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0,
+-                               "ixp_crypto:out", NULL);
++      ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0);
+       if (ret)
+               goto err;
+-      ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0,
+-                               "ixp_crypto:in", NULL);
++      ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0);
+       if (ret) {
+               qmgr_release_queue(SEND_QID);
+               goto err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/crypto/padlock-aes.c linux-2.6.29-rc3.owrt/drivers/crypto/padlock-aes.c
+--- linux-2.6.29.owrt/drivers/crypto/padlock-aes.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/crypto/padlock-aes.c 2009-05-10 23:48:28.000000000 +0200
+@@ -489,4 +489,4 @@
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Michal Ludvig");
+-MODULE_ALIAS("aes-all");
++MODULE_ALIAS("aes");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/crypto/padlock-sha.c linux-2.6.29-rc3.owrt/drivers/crypto/padlock-sha.c
+--- linux-2.6.29.owrt/drivers/crypto/padlock-sha.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/crypto/padlock-sha.c 2009-05-10 23:48:28.000000000 +0200
+@@ -304,7 +304,7 @@
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Michal Ludvig");
+-MODULE_ALIAS("sha1-all");
+-MODULE_ALIAS("sha256-all");
++MODULE_ALIAS("sha1");
++MODULE_ALIAS("sha256");
+ MODULE_ALIAS("sha1-padlock");
+ MODULE_ALIAS("sha256-padlock");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dca/dca-core.c linux-2.6.29-rc3.owrt/drivers/dca/dca-core.c
+--- linux-2.6.29.owrt/drivers/dca/dca-core.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dca/dca-core.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
++ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the Free
+@@ -28,7 +28,7 @@
+ #include <linux/device.h>
+ #include <linux/dca.h>
+-#define DCA_VERSION "1.8"
++#define DCA_VERSION "1.4"
+ MODULE_VERSION(DCA_VERSION);
+ MODULE_LICENSE("GPL");
+@@ -60,17 +60,16 @@
+ {
+       struct dca_provider *dca;
+       int err, slot = -ENODEV;
+-      unsigned long flags;
+       if (!dev)
+               return -EFAULT;
+-      spin_lock_irqsave(&dca_lock, flags);
++      spin_lock(&dca_lock);
+       /* check if the requester has not been added already */
+       dca = dca_find_provider_by_dev(dev);
+       if (dca) {
+-              spin_unlock_irqrestore(&dca_lock, flags);
++              spin_unlock(&dca_lock);
+               return -EEXIST;
+       }
+@@ -79,21 +78,19 @@
+               if (slot >= 0)
+                       break;
+       }
+-
+-      spin_unlock_irqrestore(&dca_lock, flags);
+-
+-      if (slot < 0)
++      if (slot < 0) {
++              spin_unlock(&dca_lock);
+               return slot;
++      }
+       err = dca_sysfs_add_req(dca, dev, slot);
+       if (err) {
+-              spin_lock_irqsave(&dca_lock, flags);
+-              if (dca == dca_find_provider_by_dev(dev))
+-                      dca->ops->remove_requester(dca, dev);
+-              spin_unlock_irqrestore(&dca_lock, flags);
++              dca->ops->remove_requester(dca, dev);
++              spin_unlock(&dca_lock);
+               return err;
+       }
++      spin_unlock(&dca_lock);
+       return 0;
+ }
+ EXPORT_SYMBOL_GPL(dca_add_requester);
+@@ -106,25 +103,25 @@
+ {
+       struct dca_provider *dca;
+       int slot;
+-      unsigned long flags;
+       if (!dev)
+               return -EFAULT;
+-      spin_lock_irqsave(&dca_lock, flags);
++      spin_lock(&dca_lock);
+       dca = dca_find_provider_by_dev(dev);
+       if (!dca) {
+-              spin_unlock_irqrestore(&dca_lock, flags);
++              spin_unlock(&dca_lock);
+               return -ENODEV;
+       }
+       slot = dca->ops->remove_requester(dca, dev);
+-      spin_unlock_irqrestore(&dca_lock, flags);
+-
+-      if (slot < 0)
++      if (slot < 0) {
++              spin_unlock(&dca_lock);
+               return slot;
++      }
+       dca_sysfs_remove_req(dca, slot);
++      spin_unlock(&dca_lock);
+       return 0;
+ }
+ EXPORT_SYMBOL_GPL(dca_remove_requester);
+@@ -138,18 +135,17 @@
+ {
+       struct dca_provider *dca;
+       u8 tag;
+-      unsigned long flags;
+-      spin_lock_irqsave(&dca_lock, flags);
++      spin_lock(&dca_lock);
+       dca = dca_find_provider_by_dev(dev);
+       if (!dca) {
+-              spin_unlock_irqrestore(&dca_lock, flags);
++              spin_unlock(&dca_lock);
+               return -ENODEV;
+       }
+       tag = dca->ops->get_tag(dca, dev, cpu);
+-      spin_unlock_irqrestore(&dca_lock, flags);
++      spin_unlock(&dca_lock);
+       return tag;
+ }
+@@ -221,16 +217,11 @@
+ int register_dca_provider(struct dca_provider *dca, struct device *dev)
+ {
+       int err;
+-      unsigned long flags;
+       err = dca_sysfs_add_provider(dca, dev);
+       if (err)
+               return err;
+-
+-      spin_lock_irqsave(&dca_lock, flags);
+       list_add(&dca->node, &dca_providers);
+-      spin_unlock_irqrestore(&dca_lock, flags);
+-
+       blocking_notifier_call_chain(&dca_provider_chain,
+                                    DCA_PROVIDER_ADD, NULL);
+       return 0;
+@@ -243,15 +234,9 @@
+  */
+ void unregister_dca_provider(struct dca_provider *dca)
+ {
+-      unsigned long flags;
+-
+       blocking_notifier_call_chain(&dca_provider_chain,
+                                    DCA_PROVIDER_REMOVE, NULL);
+-
+-      spin_lock_irqsave(&dca_lock, flags);
+       list_del(&dca->node);
+-      spin_unlock_irqrestore(&dca_lock, flags);
+-
+       dca_sysfs_remove_provider(dca);
+ }
+ EXPORT_SYMBOL_GPL(unregister_dca_provider);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dca/dca-sysfs.c linux-2.6.29-rc3.owrt/drivers/dca/dca-sysfs.c
+--- linux-2.6.29.owrt/drivers/dca/dca-sysfs.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dca/dca-sysfs.c      2009-05-10 23:48:28.000000000 +0200
+@@ -1,24 +1,3 @@
+-/*
+- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- *
+- * The full GNU General Public License is included in this distribution in the
+- * file called COPYING.
+- */
+-
+ #include <linux/kernel.h>
+ #include <linux/spinlock.h>
+ #include <linux/device.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/dmaengine.c linux-2.6.29-rc3.owrt/drivers/dma/dmaengine.c
+--- linux-2.6.29.owrt/drivers/dma/dmaengine.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/dmaengine.c      2009-05-10 23:48:28.000000000 +0200
+@@ -518,7 +518,6 @@
+                                      dma_chan_name(chan), err);
+                       else
+                               break;
+-                      chan->private = NULL;
+                       chan = NULL;
+               }
+       }
+@@ -537,7 +536,6 @@
+       WARN_ONCE(chan->client_count != 1,
+                 "chan reference count %d != 1\n", chan->client_count);
+       dma_chan_put(chan);
+-      chan->private = NULL;
+       mutex_unlock(&dma_list_mutex);
+ }
+ EXPORT_SYMBOL_GPL(dma_release_channel);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/dmatest.c linux-2.6.29-rc3.owrt/drivers/dma/dmatest.c
+--- linux-2.6.29.owrt/drivers/dma/dmatest.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/dmatest.c        2009-05-10 23:48:28.000000000 +0200
+@@ -430,15 +430,13 @@
+ static void __exit dmatest_exit(void)
+ {
+       struct dmatest_chan *dtc, *_dtc;
+-      struct dma_chan *chan;
+       list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
+               list_del(&dtc->node);
+-              chan = dtc->chan;
+               dmatest_cleanup_channel(dtc);
+               pr_debug("dmatest: dropped channel %s\n",
+-                       dma_chan_name(chan));
+-              dma_release_channel(chan);
++                       dma_chan_name(dtc->chan));
++              dma_release_channel(dtc->chan);
+       }
+ }
+ module_exit(dmatest_exit);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/dw_dmac.c linux-2.6.29-rc3.owrt/drivers/dma/dw_dmac.c
+--- linux-2.6.29.owrt/drivers/dma/dw_dmac.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/dw_dmac.c        2009-05-10 23:48:28.000000000 +0200
+@@ -560,7 +560,7 @@
+               unsigned long flags)
+ {
+       struct dw_dma_chan      *dwc = to_dw_dma_chan(chan);
+-      struct dw_dma_slave     *dws = chan->private;
++      struct dw_dma_slave     *dws = dwc->dws;
+       struct dw_desc          *prev;
+       struct dw_desc          *first;
+       u32                     ctllo;
+@@ -790,7 +790,7 @@
+       cfghi = DWC_CFGH_FIFO_MODE;
+       cfglo = 0;
+-      dws = chan->private;
++      dws = dwc->dws;
+       if (dws) {
+               /*
+                * We need controller-specific data to set up slave
+@@ -866,6 +866,7 @@
+       spin_lock_bh(&dwc->lock);
+       list_splice_init(&dwc->free_list, &list);
+       dwc->descs_allocated = 0;
++      dwc->dws = NULL;
+       /* Disable interrupts */
+       channel_clear_bit(dw, MASK.XFER, dwc->mask);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/dw_dmac_regs.h linux-2.6.29-rc3.owrt/drivers/dma/dw_dmac_regs.h
+--- linux-2.6.29.owrt/drivers/dma/dw_dmac_regs.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/dw_dmac_regs.h   2009-05-10 23:48:28.000000000 +0200
+@@ -139,6 +139,8 @@
+       struct list_head        queue;
+       struct list_head        free_list;
++      struct dw_dma_slave     *dws;
++
+       unsigned int            descs_allocated;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/fsldma.c linux-2.6.29-rc3.owrt/drivers/dma/fsldma.c
+--- linux-2.6.29.owrt/drivers/dma/fsldma.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/fsldma.c 2009-05-10 23:48:28.000000000 +0200
+@@ -158,8 +158,7 @@
+ static void dma_halt(struct fsl_dma_chan *fsl_chan)
+ {
+-      int i;
+-
++      int i = 0;
+       DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+               DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
+               32);
+@@ -167,11 +166,8 @@
+               DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
+               | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
+-      for (i = 0; i < 100; i++) {
+-              if (dma_is_idle(fsl_chan))
+-                      break;
++      while (!dma_is_idle(fsl_chan) && (i++ < 100))
+               udelay(10);
+-      }
+       if (i >= 100 && !dma_is_idle(fsl_chan))
+               dev_err(fsl_chan->dev, "DMA halt timeout!\n");
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioat.c linux-2.6.29-rc3.owrt/drivers/dma/ioat.c
+--- linux-2.6.29.owrt/drivers/dma/ioat.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioat.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ /*
+  * Intel I/OAT DMA Linux driver
+- * Copyright(c) 2007 - 2009 Intel Corporation.
++ * Copyright(c) 2007 Intel Corporation.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms and conditions of the GNU General Public License,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioat_dca.c linux-2.6.29-rc3.owrt/drivers/dma/ioat_dca.c
+--- linux-2.6.29.owrt/drivers/dma/ioat_dca.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioat_dca.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ /*
+  * Intel I/OAT DMA Linux driver
+- * Copyright(c) 2007 - 2009 Intel Corporation.
++ * Copyright(c) 2007 Intel Corporation.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms and conditions of the GNU General Public License,
+@@ -49,23 +49,6 @@
+ #define DCA_TAG_MAP_MASK 0xDF
+-/* expected tag map bytes for I/OAT ver.2 */
+-#define DCA2_TAG_MAP_BYTE0 0x80
+-#define DCA2_TAG_MAP_BYTE1 0x0
+-#define DCA2_TAG_MAP_BYTE2 0x81
+-#define DCA2_TAG_MAP_BYTE3 0x82
+-#define DCA2_TAG_MAP_BYTE4 0x82
+-
+-/* verify if tag map matches expected values */
+-static inline int dca2_tag_map_valid(u8 *tag_map)
+-{
+-      return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+-              (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+-              (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+-              (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+-              (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+-}
+-
+ /*
+  * "Legacy" DCA systems do not implement the DCA register set in the
+  * I/OAT device.  Software needs direct support for their tag mappings.
+@@ -469,13 +452,6 @@
+                       ioatdca->tag_map[i] = 0;
+       }
+-      if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+-              dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+-                      "disabling DCA\n");
+-              free_dca_provider(dca);
+-              return NULL;
+-      }
+-
+       err = register_dca_provider(dca, &pdev->dev);
+       if (err) {
+               free_dca_provider(dca);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioat_dma.c linux-2.6.29-rc3.owrt/drivers/dma/ioat_dma.c
+--- linux-2.6.29.owrt/drivers/dma/ioat_dma.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioat_dma.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ /*
+  * Intel I/OAT DMA Linux driver
+- * Copyright(c) 2004 - 2009 Intel Corporation.
++ * Copyright(c) 2004 - 2007 Intel Corporation.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms and conditions of the GNU General Public License,
+@@ -189,13 +189,11 @@
+               ioat_chan->xfercap = xfercap;
+               ioat_chan->desccount = 0;
+               INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
+-              if (ioat_chan->device->version == IOAT_VER_2_0)
+-                      writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+-                             IOAT_DMA_DCA_ANY_CPU,
+-                             ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+-              else if (ioat_chan->device->version == IOAT_VER_3_0)
+-                      writel(IOAT_DMA_DCA_ANY_CPU,
+-                             ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
++              if (ioat_chan->device->version != IOAT_VER_1_2) {
++                      writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
++                                      | IOAT_DMA_DCA_ANY_CPU,
++                              ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
++              }
+               spin_lock_init(&ioat_chan->cleanup_lock);
+               spin_lock_init(&ioat_chan->desc_lock);
+               INIT_LIST_HEAD(&ioat_chan->free_desc);
+@@ -1171,8 +1169,9 @@
+                                * up if the client is done with the descriptor
+                                */
+                               if (async_tx_test_ack(&desc->async_tx)) {
+-                                      list_move_tail(&desc->node,
+-                                                     &ioat_chan->free_desc);
++                                      list_del(&desc->node);
++                                      list_add_tail(&desc->node,
++                                                    &ioat_chan->free_desc);
+                               } else
+                                       desc->async_tx.cookie = 0;
+                       } else {
+@@ -1363,7 +1362,6 @@
+       dma_cookie_t cookie;
+       int err = 0;
+       struct completion cmp;
+-      unsigned long tmo;
+       src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
+       if (!src)
+@@ -1415,10 +1413,9 @@
+       }
+       device->common.device_issue_pending(dma_chan);
+-      tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
++      wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+-      if (tmo == 0 ||
+-          device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
++      if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+                                       != DMA_SUCCESS) {
+               dev_err(&device->pdev->dev,
+                       "Self-test copy timed out, disabling\n");
+@@ -1660,13 +1657,6 @@
+               " %d channels, device version 0x%02x, driver version %s\n",
+               device->common.chancnt, device->version, IOAT_DMA_VERSION);
+-      if (!device->common.chancnt) {
+-              dev_err(&device->pdev->dev,
+-                      "Intel(R) I/OAT DMA Engine problem found: "
+-                      "zero channels detected\n");
+-              goto err_setup_interrupts;
+-      }
+-
+       err = ioat_dma_setup_interrupts(device);
+       if (err)
+               goto err_setup_interrupts;
+@@ -1706,9 +1696,6 @@
+       struct dma_chan *chan, *_chan;
+       struct ioat_dma_chan *ioat_chan;
+-      if (device->version != IOAT_VER_3_0)
+-              cancel_delayed_work(&device->work);
+-
+       ioat_dma_remove_interrupts(device);
+       dma_async_device_unregister(&device->common);
+@@ -1720,6 +1707,10 @@
+       pci_release_regions(device->pdev);
+       pci_disable_device(device->pdev);
++      if (device->version != IOAT_VER_3_0) {
++              cancel_delayed_work(&device->work);
++      }
++
+       list_for_each_entry_safe(chan, _chan,
+                                &device->common.channels, device_node) {
+               ioat_chan = to_ioat_chan(chan);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioatdma.h linux-2.6.29-rc3.owrt/drivers/dma/ioatdma.h
+--- linux-2.6.29.owrt/drivers/dma/ioatdma.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioatdma.h        2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
++ * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the Free
+@@ -29,7 +29,7 @@
+ #include <linux/pci_ids.h>
+ #include <net/tcp.h>
+-#define IOAT_DMA_VERSION  "3.64"
++#define IOAT_DMA_VERSION  "3.30"
+ enum ioat_interrupt {
+       none = 0,
+@@ -135,14 +135,12 @@
+       #ifdef CONFIG_NET_DMA
+       switch (dev->version) {
+       case IOAT_VER_1_2:
++      case IOAT_VER_3_0:
+               sysctl_tcp_dma_copybreak = 4096;
+               break;
+       case IOAT_VER_2_0:
+               sysctl_tcp_dma_copybreak = 2048;
+               break;
+-      case IOAT_VER_3_0:
+-              sysctl_tcp_dma_copybreak = 262144;
+-              break;
+       }
+       #endif
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioatdma_hw.h linux-2.6.29-rc3.owrt/drivers/dma/ioatdma_hw.h
+--- linux-2.6.29.owrt/drivers/dma/ioatdma_hw.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioatdma_hw.h     2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
++ * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the Free
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ioatdma_registers.h linux-2.6.29-rc3.owrt/drivers/dma/ioatdma_registers.h
+--- linux-2.6.29.owrt/drivers/dma/ioatdma_registers.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ioatdma_registers.h      2009-05-10 23:48:28.000000000 +0200
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
++ * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the Free
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/iop-adma.c linux-2.6.29-rc3.owrt/drivers/dma/iop-adma.c
+--- linux-2.6.29.owrt/drivers/dma/iop-adma.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/iop-adma.c       2009-05-10 23:48:28.000000000 +0200
+@@ -928,19 +928,19 @@
+       for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
+               xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
+-              if (!xor_srcs[src_idx]) {
+-                      while (src_idx--)
++              if (!xor_srcs[src_idx])
++                      while (src_idx--) {
+                               __free_page(xor_srcs[src_idx]);
+-                      return -ENOMEM;
+-              }
++                              return -ENOMEM;
++                      }
+       }
+       dest = alloc_page(GFP_KERNEL);
+-      if (!dest) {
+-              while (src_idx--)
++      if (!dest)
++              while (src_idx--) {
+                       __free_page(xor_srcs[src_idx]);
+-              return -ENOMEM;
+-      }
++                      return -ENOMEM;
++              }
+       /* Fill in src buffers */
+       for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
+@@ -1401,7 +1401,7 @@
+ static struct platform_driver iop_adma_driver = {
+       .probe          = iop_adma_probe,
+-      .remove         = __devexit_p(iop_adma_remove),
++      .remove         = iop_adma_remove,
+       .driver         = {
+               .owner  = THIS_MODULE,
+               .name   = "iop-adma",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/ipu/ipu_idmac.c linux-2.6.29-rc3.owrt/drivers/dma/ipu/ipu_idmac.c
+--- linux-2.6.29.owrt/drivers/dma/ipu/ipu_idmac.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/ipu/ipu_idmac.c  2009-05-10 23:48:28.000000000 +0200
+@@ -729,7 +729,7 @@
+       ichan->status = IPU_CHANNEL_READY;
+-      spin_unlock_irqrestore(&ipu->lock, flags);
++      spin_unlock_irqrestore(ipu->lock, flags);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/dma/mv_xor.c linux-2.6.29-rc3.owrt/drivers/dma/mv_xor.c
+--- linux-2.6.29.owrt/drivers/dma/mv_xor.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/dma/mv_xor.c 2009-05-10 23:48:28.000000000 +0200
+@@ -1019,19 +1019,19 @@
+       for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
+               xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
+-              if (!xor_srcs[src_idx]) {
+-                      while (src_idx--)
++              if (!xor_srcs[src_idx])
++                      while (src_idx--) {
+                               __free_page(xor_srcs[src_idx]);
+-                      return -ENOMEM;
+-              }
++                              return -ENOMEM;
++                      }
+       }
+       dest = alloc_page(GFP_KERNEL);
+-      if (!dest) {
+-              while (src_idx--)
++      if (!dest)
++              while (src_idx--) {
+                       __free_page(xor_srcs[src_idx]);
+-              return -ENOMEM;
+-      }
++                      return -ENOMEM;
++              }
+       /* Fill in src buffers */
+       for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
+@@ -1287,7 +1287,7 @@
+ static struct platform_driver mv_xor_driver = {
+       .probe          = mv_xor_probe,
+-      .remove         = __devexit_p(mv_xor_remove),
++      .remove         = mv_xor_remove,
+       .driver         = {
+               .owner  = THIS_MODULE,
+               .name   = MV_XOR_NAME,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-card.c linux-2.6.29-rc3.owrt/drivers/firewire/fw-card.c
+--- linux-2.6.29.owrt/drivers/firewire/fw-card.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-card.c   2009-05-10 23:48:28.000000000 +0200
+@@ -232,7 +232,7 @@
+       root_id = root_node->node_id;
+       grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
+-      if (is_next_generation(generation, card->bm_generation) ||
++      if (card->bm_generation + 1 == generation ||
+           (card->bm_generation != generation && grace)) {
+               /*
+                * This first step is to figure out who is IRM and
+@@ -412,7 +412,6 @@
+ {
+       u32 *config_rom;
+       size_t length;
+-      int err;
+       card->max_receive = max_receive;
+       card->link_speed = link_speed;
+@@ -423,13 +422,7 @@
+       list_add_tail(&card->link, &card_list);
+       mutex_unlock(&card_mutex);
+-      err = card->driver->enable(card, config_rom, length);
+-      if (err < 0) {
+-              mutex_lock(&card_mutex);
+-              list_del(&card->link);
+-              mutex_unlock(&card_mutex);
+-      }
+-      return err;
++      return card->driver->enable(card, config_rom, length);
+ }
+ EXPORT_SYMBOL(fw_card_add);
+@@ -519,7 +512,7 @@
+       fw_core_initiate_bus_reset(card, 1);
+       mutex_lock(&card_mutex);
+-      list_del_init(&card->link);
++      list_del(&card->link);
+       mutex_unlock(&card_mutex);
+       /* Set up the dummy driver. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-device.c linux-2.6.29-rc3.owrt/drivers/firewire/fw-device.c
+--- linux-2.6.29.owrt/drivers/firewire/fw-device.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-device.c 2009-05-10 23:48:28.000000000 +0200
+@@ -25,7 +25,6 @@
+ #include <linux/device.h>
+ #include <linux/delay.h>
+ #include <linux/idr.h>
+-#include <linux/jiffies.h>
+ #include <linux/string.h>
+ #include <linux/rwsem.h>
+ #include <linux/semaphore.h>
+@@ -635,39 +634,12 @@
+       return device;
+ }
+-/*
+- * These defines control the retry behavior for reading the config
+- * rom.  It shouldn't be necessary to tweak these; if the device
+- * doesn't respond to a config rom read within 10 seconds, it's not
+- * going to respond at all.  As for the initial delay, a lot of
+- * devices will be able to respond within half a second after bus
+- * reset.  On the other hand, it's not really worth being more
+- * aggressive than that, since it scales pretty well; if 10 devices
+- * are plugged in, they're all getting read within one second.
+- */
+-
+-#define MAX_RETRIES   10
+-#define RETRY_DELAY   (3 * HZ)
+-#define INITIAL_DELAY (HZ / 2)
+-#define SHUTDOWN_DELAY        (2 * HZ)
+-
+ static void fw_device_shutdown(struct work_struct *work)
+ {
+       struct fw_device *device =
+               container_of(work, struct fw_device, work.work);
+       int minor = MINOR(device->device.devt);
+-      if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
+-          && !list_empty(&device->card->link)) {
+-              schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+-              return;
+-      }
+-
+-      if (atomic_cmpxchg(&device->state,
+-                         FW_DEVICE_GONE,
+-                         FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
+-              return;
+-
+       fw_device_cdev_remove(device);
+       device_for_each_child(&device->device, NULL, shutdown_unit);
+       device_unregister(&device->device);
+@@ -675,7 +647,6 @@
+       down_write(&fw_device_rwsem);
+       idr_remove(&fw_device_idr, minor);
+       up_write(&fw_device_rwsem);
+-
+       fw_device_put(device);
+ }
+@@ -683,63 +654,25 @@
+       .release        = fw_device_release,
+ };
+-static void fw_device_update(struct work_struct *work);
+-
+ /*
+- * If a device was pending for deletion because its node went away but its
+- * bus info block and root directory header matches that of a newly discovered
+- * device, revive the existing fw_device.
+- * The newly allocated fw_device becomes obsolete instead.
++ * These defines control the retry behavior for reading the config
++ * rom.  It shouldn't be necessary to tweak these; if the device
++ * doesn't respond to a config rom read within 10 seconds, it's not
++ * going to respond at all.  As for the initial delay, a lot of
++ * devices will be able to respond within half a second after bus
++ * reset.  On the other hand, it's not really worth being more
++ * aggressive than that, since it scales pretty well; if 10 devices
++ * are plugged in, they're all getting read within one second.
+  */
+-static int lookup_existing_device(struct device *dev, void *data)
+-{
+-      struct fw_device *old = fw_device(dev);
+-      struct fw_device *new = data;
+-      struct fw_card *card = new->card;
+-      int match = 0;
+-
+-      down_read(&fw_device_rwsem); /* serialize config_rom access */
+-      spin_lock_irq(&card->lock);  /* serialize node access */
+-
+-      if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
+-          atomic_cmpxchg(&old->state,
+-                         FW_DEVICE_GONE,
+-                         FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+-              struct fw_node *current_node = new->node;
+-              struct fw_node *obsolete_node = old->node;
+-
+-              new->node = obsolete_node;
+-              new->node->data = new;
+-              old->node = current_node;
+-              old->node->data = old;
+-
+-              old->max_speed = new->max_speed;
+-              old->node_id = current_node->node_id;
+-              smp_wmb();  /* update node_id before generation */
+-              old->generation = card->generation;
+-              old->config_rom_retries = 0;
+-              fw_notify("rediscovered device %s\n", dev_name(dev));
+-
+-              PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+-              schedule_delayed_work(&old->work, 0);
+-
+-              if (current_node == card->root_node)
+-                      fw_schedule_bm_work(card, 0);
+-
+-              match = 1;
+-      }
+-      spin_unlock_irq(&card->lock);
+-      up_read(&fw_device_rwsem);
+-
+-      return match;
+-}
++#define MAX_RETRIES   10
++#define RETRY_DELAY   (3 * HZ)
++#define INITIAL_DELAY (HZ / 2)
+ static void fw_device_init(struct work_struct *work)
+ {
+       struct fw_device *device =
+               container_of(work, struct fw_device, work.work);
+-      struct device *revived_dev;
+       int minor, err;
+       /*
+@@ -763,15 +696,6 @@
+               return;
+       }
+-      revived_dev = device_find_child(device->card->device,
+-                                      device, lookup_existing_device);
+-      if (revived_dev) {
+-              put_device(revived_dev);
+-              fw_device_release(&device->device);
+-
+-              return;
+-      }
+-
+       device_initialize(&device->device);
+       fw_device_get(device);
+@@ -810,10 +734,9 @@
+        * fw_node_event().
+        */
+       if (atomic_cmpxchg(&device->state,
+-                         FW_DEVICE_INITIALIZING,
+-                         FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+-              PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+-              schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
++                  FW_DEVICE_INITIALIZING,
++                  FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
++              fw_device_shutdown(work);
+       } else {
+               if (device->config_rom_retries)
+                       fw_notify("created device %s: GUID %08x%08x, S%d00, "
+@@ -924,8 +847,8 @@
+       case REREAD_BIB_UNCHANGED:
+               if (atomic_cmpxchg(&device->state,
+-                                 FW_DEVICE_INITIALIZING,
+-                                 FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
++                          FW_DEVICE_INITIALIZING,
++                          FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+                       goto gone;
+               fw_device_update(work);
+@@ -956,8 +879,8 @@
+       create_units(device);
+       if (atomic_cmpxchg(&device->state,
+-                         FW_DEVICE_INITIALIZING,
+-                         FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
++                  FW_DEVICE_INITIALIZING,
++                  FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+               goto gone;
+       fw_notify("refreshed device %s\n", dev_name(&device->device));
+@@ -967,9 +890,8 @@
+  give_up:
+       fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
+  gone:
+-      atomic_set(&device->state, FW_DEVICE_GONE);
+-      PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+-      schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
++      atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
++      fw_device_shutdown(work);
+  out:
+       if (node_id == card->root_node->node_id)
+               fw_schedule_bm_work(card, 0);
+@@ -1073,10 +995,9 @@
+                */
+               device = node->data;
+               if (atomic_xchg(&device->state,
+-                              FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
++                              FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+                       PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+-                      schedule_delayed_work(&device->work,
+-                              list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
++                      schedule_delayed_work(&device->work, 0);
+               }
+               break;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-device.h linux-2.6.29-rc3.owrt/drivers/firewire/fw-device.h
+--- linux-2.6.29.owrt/drivers/firewire/fw-device.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-device.h 2009-05-10 23:48:28.000000000 +0200
+@@ -28,7 +28,6 @@
+ enum fw_device_state {
+       FW_DEVICE_INITIALIZING,
+       FW_DEVICE_RUNNING,
+-      FW_DEVICE_GONE,
+       FW_DEVICE_SHUTDOWN,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-ohci.c linux-2.6.29-rc3.owrt/drivers/firewire/fw-ohci.c
+--- linux-2.6.29.owrt/drivers/firewire/fw-ohci.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-ohci.c   2009-05-10 23:48:28.000000000 +0200
+@@ -226,7 +226,7 @@
+ #define CONTEXT_DEAD  0x0800
+ #define CONTEXT_ACTIVE        0x0400
+-#define OHCI1394_MAX_AT_REQ_RETRIES   0xf
++#define OHCI1394_MAX_AT_REQ_RETRIES   0x2
+ #define OHCI1394_MAX_AT_RESP_RETRIES  0x2
+ #define OHCI1394_MAX_PHYS_RESP_RETRIES        0x8
+@@ -896,11 +896,11 @@
+       for (i = 0; i < 10; i++) {
+               reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
+               if ((reg & CONTEXT_ACTIVE) == 0)
+-                      return;
++                      break;
++              fw_notify("context_stop: still active (0x%08x)\n", reg);
+               mdelay(1);
+       }
+-      fw_error("Error: DMA context still active (0x%08x)\n", reg);
+ }
+ struct driver_data {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-sbp2.c linux-2.6.29-rc3.owrt/drivers/firewire/fw-sbp2.c
+--- linux-2.6.29.owrt/drivers/firewire/fw-sbp2.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-sbp2.c   2009-05-10 23:48:28.000000000 +0200
+@@ -168,7 +168,6 @@
+       int address_high;
+       unsigned int workarounds;
+       unsigned int mgt_orb_timeout;
+-      unsigned int max_payload;
+       int dont_block; /* counter for each logical unit */
+       int blocked;    /* ditto */
+@@ -311,16 +310,14 @@
+       dma_addr_t page_table_bus;
+ };
+-#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+-#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
+-
+ /*
+  * List of devices with known bugs.
+  *
+  * The firmware_revision field, masked with 0xffff00, is the best
+  * indicator for the type of bridge chip of a device.  It yields a few
+  * false positives but this did not break correctly behaving devices
+- * so far.
++ * so far.  We use ~0 as a wildcard, since the 24 bit values we get
++ * from the config rom can never match that.
+  */
+ static const struct {
+       u32 firmware_revision;
+@@ -342,35 +339,33 @@
+       },
+       /* Initio bridges, actually only needed for some older ones */ {
+               .firmware_revision      = 0x000200,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model                  = ~0,
+               .workarounds            = SBP2_WORKAROUND_INQUIRY_36,
+       },
+       /* PL-3507 bridge with Prolific firmware */ {
+               .firmware_revision      = 0x012800,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model                  = ~0,
+               .workarounds            = SBP2_WORKAROUND_POWER_CONDITION,
+       },
+       /* Symbios bridge */ {
+               .firmware_revision      = 0xa0b800,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model                  = ~0,
+               .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
+       },
+       /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+               .firmware_revision      = 0x002600,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model                  = ~0,
+               .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
+       },
++
+       /*
+-       * iPod 2nd generation: needs 128k max transfer size workaround
+-       * iPod 3rd generation: needs fix capacity workaround
++       * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
++       * these iPods do not feature the read_capacity bug according
++       * to one report.  Read_capacity behaviour as well as model_id
++       * could change due to Apple-supplied firmware updates though.
+        */
+-      {
+-              .firmware_revision      = 0x0a2700,
+-              .model                  = 0x000000,
+-              .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS |
+-                                        SBP2_WORKAROUND_FIX_CAPACITY,
+-      },
+-      /* iPod 4th generation */ {
++
++      /* iPod 4th generation. */ {
+               .firmware_revision      = 0x0a2700,
+               .model                  = 0x000021,
+               .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+@@ -1097,7 +1092,7 @@
+                       continue;
+               if (sbp2_workarounds_table[i].model != model &&
+-                  sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
++                  sbp2_workarounds_table[i].model != ~0)
+                       continue;
+               w |= sbp2_workarounds_table[i].workarounds;
+@@ -1147,28 +1142,20 @@
+       fw_device_get(device);
+       fw_unit_get(unit);
++      /* Initialize to values that won't match anything in our table. */
++      firmware_revision = 0xff000000;
++      model = 0xff000000;
++
+       /* implicit directory ID */
+       tgt->directory_id = ((unit->directory - device->config_rom) * 4
+                            + CSR_CONFIG_ROM) & 0xffffff;
+-      firmware_revision = SBP2_ROM_VALUE_MISSING;
+-      model             = SBP2_ROM_VALUE_MISSING;
+-
+       if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
+                              &firmware_revision) < 0)
+               goto fail_tgt_put;
+       sbp2_init_workarounds(tgt, model, firmware_revision);
+-      /*
+-       * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+-       * and so on up to 4096 bytes.  The SBP-2 max_payload field
+-       * specifies the max payload size as 2 ^ (max_payload + 2), so
+-       * if we set this to max_speed + 7, we get the right value.
+-       */
+-      tgt->max_payload = min(device->max_speed + 7, 10U);
+-      tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+-
+       /* Do the login in a workqueue so we can easily reschedule retries. */
+       list_for_each_entry(lu, &tgt->lu_list, link)
+               sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
+@@ -1286,19 +1273,6 @@
+       .id_table = sbp2_id_table,
+ };
+-static void sbp2_unmap_scatterlist(struct device *card_device,
+-                                 struct sbp2_command_orb *orb)
+-{
+-      if (scsi_sg_count(orb->cmd))
+-              dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+-                           scsi_sg_count(orb->cmd),
+-                           orb->cmd->sc_data_direction);
+-
+-      if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+-              dma_unmap_single(card_device, orb->page_table_bus,
+-                               sizeof(orb->page_table), DMA_TO_DEVICE);
+-}
+-
+ static unsigned int
+ sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
+ {
+@@ -1378,7 +1352,15 @@
+       dma_unmap_single(device->card->device, orb->base.request_bus,
+                        sizeof(orb->request), DMA_TO_DEVICE);
+-      sbp2_unmap_scatterlist(device->card->device, orb);
++
++      if (scsi_sg_count(orb->cmd) > 0)
++              dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
++                           scsi_sg_count(orb->cmd),
++                           orb->cmd->sc_data_direction);
++
++      if (orb->page_table_bus != 0)
++              dma_unmap_single(device->card->device, orb->page_table_bus,
++                               sizeof(orb->page_table), DMA_TO_DEVICE);
+       orb->cmd->result = result;
+       orb->done(orb->cmd);
+@@ -1452,6 +1434,7 @@
+       struct sbp2_logical_unit *lu = cmd->device->hostdata;
+       struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+       struct sbp2_command_orb *orb;
++      unsigned int max_payload;
+       int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
+       /*
+@@ -1479,9 +1462,17 @@
+       orb->done = done;
+       orb->cmd  = cmd;
+-      orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
++      orb->request.next.high   = cpu_to_be32(SBP2_ORB_NULL);
++      /*
++       * At speed 100 we can do 512 bytes per packet, at speed 200,
++       * 1024 bytes per packet etc.  The SBP-2 max_payload field
++       * specifies the max payload size as 2 ^ (max_payload + 2), so
++       * if we set this to max_speed + 7, we get the right value.
++       */
++      max_payload = min(device->max_speed + 7,
++                        device->card->max_receive - 1);
+       orb->request.misc = cpu_to_be32(
+-              COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
++              COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+               COMMAND_ORB_SPEED(device->max_speed) |
+               COMMAND_ORB_NOTIFY);
+@@ -1500,10 +1491,8 @@
+       orb->base.request_bus =
+               dma_map_single(device->card->device, &orb->request,
+                              sizeof(orb->request), DMA_TO_DEVICE);
+-      if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+-              sbp2_unmap_scatterlist(device->card->device, orb);
++      if (dma_mapping_error(device->card->device, orb->base.request_bus))
+               goto out;
+-      }
+       sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
+                     lu->command_block_agent_address + SBP2_ORB_POINTER);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-topology.c linux-2.6.29-rc3.owrt/drivers/firewire/fw-topology.c
+--- linux-2.6.29.owrt/drivers/firewire/fw-topology.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-topology.c       2009-05-10 23:48:28.000000000 +0200
+@@ -518,18 +518,6 @@
+       struct fw_node *local_node;
+       unsigned long flags;
+-      /*
+-       * If the selfID buffer is not the immediate successor of the
+-       * previously processed one, we cannot reliably compare the
+-       * old and new topologies.
+-       */
+-      if (!is_next_generation(generation, card->generation) &&
+-          card->local_node != NULL) {
+-              fw_notify("skipped bus generations, destroying all nodes\n");
+-              fw_destroy_nodes(card);
+-              card->bm_retries = 0;
+-      }
+-
+       spin_lock_irqsave(&card->lock, flags);
+       card->node_id = node_id;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firewire/fw-transaction.h linux-2.6.29-rc3.owrt/drivers/firewire/fw-transaction.h
+--- linux-2.6.29.owrt/drivers/firewire/fw-transaction.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firewire/fw-transaction.h    2009-05-10 23:48:28.000000000 +0200
+@@ -276,15 +276,6 @@
+ extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
+ /*
+- * Check whether new_generation is the immediate successor of old_generation.
+- * Take counter roll-over at 255 (as per to OHCI) into account.
+- */
+-static inline bool is_next_generation(int new_generation, int old_generation)
+-{
+-      return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+-}
+-
+-/*
+  * The iso packet format allows for an immediate header/payload part
+  * stored in 'header' immediately after the packet info plus an
+  * indirect payload part that is pointer to by the 'payload' field.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/firmware/memmap.c linux-2.6.29-rc3.owrt/drivers/firmware/memmap.c
+--- linux-2.6.29.owrt/drivers/firmware/memmap.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/firmware/memmap.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  * linux/drivers/firmware/memmap.c
+  *  Copyright (C) 2008 SUSE LINUX Products GmbH
+- *  by Bernhard Walle <bernhard.walle@gmx.de>
++ *  by Bernhard Walle <bwalle@suse.de>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License v2.0 as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpio/gpiolib.c linux-2.6.29-rc3.owrt/drivers/gpio/gpiolib.c
+--- linux-2.6.29.owrt/drivers/gpio/gpiolib.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpio/gpiolib.c       2009-05-10 23:48:28.000000000 +0200
+@@ -789,7 +789,6 @@
+       } else {
+               status = -EBUSY;
+               module_put(chip->owner);
+-              goto done;
+       }
+       if (chip->request) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_bufs.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_bufs.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_bufs.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_bufs.c   2009-05-10 23:48:28.000000000 +0200
+@@ -420,7 +420,7 @@
+                               dev->sigdata.lock = NULL;
+                       master->lock.hw_lock = NULL;   /* SHM removed */
+                       master->lock.file_priv = NULL;
+-                      wake_up_interruptible_all(&master->lock.lock_queue);
++                      wake_up_interruptible(&master->lock.lock_queue);
+               }
+               break;
+       case _DRM_AGP:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_crtc.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_crtc.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_crtc.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_crtc.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1741,8 +1741,9 @@
+  * RETURNS:
+  * Zero on success, errno on failure.
+  */
+-void drm_fb_release(struct drm_file *priv)
++void drm_fb_release(struct file *filp)
+ {
++      struct drm_file *priv = filp->private_data;
+       struct drm_device *dev = priv->minor->dev;
+       struct drm_framebuffer *fb, *tfb;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_crtc_helper.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_crtc_helper.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_crtc_helper.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_crtc_helper.c    2009-05-10 23:48:28.000000000 +0200
+@@ -452,59 +452,6 @@
+       kfree(modes);
+       kfree(enabled);
+ }
+-
+-/**
+- * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+- * @encoder: encoder to test
+- * @crtc: crtc to test
+- *
+- * Return false if @encoder can't be driven by @crtc, true otherwise.
+- */
+-static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+-                              struct drm_crtc *crtc)
+-{
+-      struct drm_device *dev;
+-      struct drm_crtc *tmp;
+-      int crtc_mask = 1;
+-
+-      WARN(!crtc, "checking null crtc?");
+-
+-      dev = crtc->dev;
+-
+-      list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
+-              if (tmp == crtc)
+-                      break;
+-              crtc_mask <<= 1;
+-      }
+-
+-      if (encoder->possible_crtcs & crtc_mask)
+-              return true;
+-      return false;
+-}
+-
+-/*
+- * Check the CRTC we're going to map each output to vs. its current
+- * CRTC.  If they don't match, we have to disable the output and the CRTC
+- * since the driver will have to re-route things.
+- */
+-static void
+-drm_crtc_prepare_encoders(struct drm_device *dev)
+-{
+-      struct drm_encoder_helper_funcs *encoder_funcs;
+-      struct drm_encoder *encoder;
+-
+-      list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+-              encoder_funcs = encoder->helper_private;
+-              /* Disable unused encoders */
+-              if (encoder->crtc == NULL)
+-                      (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+-              /* Disable encoders whose CRTC is about to change */
+-              if (encoder_funcs->get_crtc &&
+-                  encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+-                      (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+-      }
+-}
+-
+ /**
+  * drm_crtc_set_mode - set a mode
+  * @crtc: CRTC to program
+@@ -565,8 +512,8 @@
+       if (drm_mode_equal(&saved_mode, &crtc->mode)) {
+               if (saved_x != crtc->x || saved_y != crtc->y ||
+                   depth_changed || bpp_changed) {
+-                      ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
+-                                                       old_fb);
++                      crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
++                                                old_fb);
+                       goto done;
+               }
+       }
+@@ -600,16 +547,12 @@
+               encoder_funcs->prepare(encoder);
+       }
+-      drm_crtc_prepare_encoders(dev);
+-
+       crtc_funcs->prepare(crtc);
+       /* Set up the DPLL and any encoders state that needs to adjust or depend
+        * on the DPLL.
+        */
+-      ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+-      if (!ret)
+-          goto done;
++      crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+       list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+@@ -672,7 +615,7 @@
+       struct drm_device *dev;
+       struct drm_crtc **save_crtcs, *new_crtc;
+       struct drm_encoder **save_encoders, *new_encoder;
+-      struct drm_framebuffer *old_fb = NULL;
++      struct drm_framebuffer *old_fb;
+       bool save_enabled;
+       bool mode_changed = false;
+       bool fb_changed = false;
+@@ -723,10 +666,9 @@
+        * and then just flip_or_move it */
+       if (set->crtc->fb != set->fb) {
+               /* If we have no fb then treat it as a full mode set */
+-              if (set->crtc->fb == NULL) {
+-                      DRM_DEBUG("crtc has no fb, full mode set\n");
++              if (set->crtc->fb == NULL)
+                       mode_changed = true;
+-              } else if ((set->fb->bits_per_pixel !=
++              else if ((set->fb->bits_per_pixel !=
+                        set->crtc->fb->bits_per_pixel) ||
+                        set->fb->depth != set->crtc->fb->depth)
+                       fb_changed = true;
+@@ -738,7 +680,7 @@
+               fb_changed = true;
+       if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
+-              DRM_DEBUG("modes are different, full mode set\n");
++              DRM_DEBUG("modes are different\n");
+               drm_mode_debug_printmodeline(&set->crtc->mode);
+               drm_mode_debug_printmodeline(set->mode);
+               mode_changed = true;
+@@ -764,7 +706,6 @@
+               }
+               if (new_encoder != connector->encoder) {
+-                      DRM_DEBUG("encoder changed, full mode switch\n");
+                       mode_changed = true;
+                       connector->encoder = new_encoder;
+               }
+@@ -791,20 +732,10 @@
+                       if (set->connectors[ro] == connector)
+                               new_crtc = set->crtc;
+               }
+-
+-              /* Make sure the new CRTC will work with the encoder */
+-              if (new_crtc &&
+-                  !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
+-                      ret = -EINVAL;
+-                      goto fail_set_mode;
+-              }
+               if (new_crtc != connector->encoder->crtc) {
+-                      DRM_DEBUG("crtc changed, full mode switch\n");
+                       mode_changed = true;
+                       connector->encoder->crtc = new_crtc;
+               }
+-              DRM_DEBUG("setting connector %d crtc to %p\n",
+-                        connector->base.id, new_crtc);
+       }
+       /* mode_set_base is not a required function */
+@@ -821,8 +752,6 @@
+                       if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
+                                                     set->x, set->y,
+                                                     old_fb)) {
+-                              DRM_ERROR("failed to set mode on crtc %p\n",
+-                                        set->crtc);
+                               ret = -EINVAL;
+                               goto fail_set_mode;
+                       }
+@@ -836,10 +765,7 @@
+               old_fb = set->crtc->fb;
+               if (set->crtc->fb != set->fb)
+                       set->crtc->fb = set->fb;
+-              ret = crtc_funcs->mode_set_base(set->crtc,
+-                                              set->x, set->y, old_fb);
+-              if (ret != 0)
+-                  goto fail_set_mode;
++              crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb);
+       }
+       kfree(save_encoders);
+@@ -848,14 +774,9 @@
+ fail_set_mode:
+       set->crtc->enabled = save_enabled;
+-      set->crtc->fb = old_fb;
+       count = 0;
+-      list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+-              if (!connector->encoder)
+-                      continue;
+-
++      list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+               connector->encoder->crtc = save_crtcs[count++];
+-      }
+ fail_no_encoder:
+       kfree(save_crtcs);
+       count = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_edid.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_edid.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_edid.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_edid.c   2009-05-10 23:48:28.000000000 +0200
+@@ -125,7 +125,7 @@
+               DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
+               goto bad;
+       }
+-      if (edid->revision > 3) {
++      if (edid->revision <= 0 || edid->revision > 3) {
+               DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
+               goto bad;
+       }
+@@ -320,10 +320,10 @@
+       mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
+       mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
+-      mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
++      mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+                                             pt->vsync_offset_lo);
+       mode->vsync_end = mode->vsync_start +
+-              ((pt->vsync_pulse_width_hi << 4) |
++              ((pt->vsync_pulse_width_hi << 8) |
+                pt->vsync_pulse_width_lo);
+       mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_fops.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_fops.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_fops.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_fops.c   2009-05-10 23:48:28.000000000 +0200
+@@ -457,9 +457,6 @@
+       if (dev->driver->driver_features & DRIVER_GEM)
+               drm_gem_release(dev, file_priv);
+-      if (dev->driver->driver_features & DRIVER_MODESET)
+-              drm_fb_release(file_priv);
+-
+       mutex_lock(&dev->ctxlist_mutex);
+       if (!list_empty(&dev->ctxlist)) {
+               struct drm_ctx_list *pos, *n;
+@@ -484,7 +481,6 @@
+       mutex_lock(&dev->struct_mutex);
+       if (file_priv->is_master) {
+-              struct drm_master *master = file_priv->master;
+               struct drm_file *temp;
+               list_for_each_entry(temp, &dev->filelist, lhead) {
+                       if ((temp->master == file_priv->master) &&
+@@ -492,19 +488,6 @@
+                               temp->authenticated = 0;
+               }
+-              /**
+-               * Since the master is disappearing, so is the
+-               * possibility to lock.
+-               */
+-
+-              if (master->lock.hw_lock) {
+-                      if (dev->sigdata.lock == master->lock.hw_lock)
+-                              dev->sigdata.lock = NULL;
+-                      master->lock.hw_lock = NULL;
+-                      master->lock.file_priv = NULL;
+-                      wake_up_interruptible_all(&master->lock.lock_queue);
+-              }
+-
+               if (file_priv->minor->master == file_priv->master) {
+                       /* drop the reference held my the minor */
+                       drm_master_put(&file_priv->minor->master);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_gem.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_gem.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_gem.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_gem.c    2009-05-10 23:48:28.000000000 +0200
+@@ -104,8 +104,8 @@
+       if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START,
+                       DRM_FILE_PAGE_OFFSET_SIZE)) {
+-              drm_ht_remove(&mm->offset_hash);
+               drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
++              drm_ht_remove(&mm->offset_hash);
+               return -ENOMEM;
+       }
+@@ -136,7 +136,7 @@
+       obj = kcalloc(1, sizeof(*obj), GFP_KERNEL);
+       obj->dev = dev;
+-      obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
++      obj->filp = shmem_file_setup("drm mm object", size, 0);
+       if (IS_ERR(obj->filp)) {
+               kfree(obj);
+               return NULL;
+@@ -295,37 +295,35 @@
+               return -EBADF;
+ again:
+-      if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) {
+-              ret = -ENOMEM;
+-              goto err;
+-      }
++      if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0)
++              return -ENOMEM;
+       spin_lock(&dev->object_name_lock);
+-      if (!obj->name) {
+-              ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
+-                                      &obj->name);
+-              args->name = (uint64_t) obj->name;
++      if (obj->name) {
++              args->name = obj->name;
+               spin_unlock(&dev->object_name_lock);
++              return 0;
++      }
++      ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
++                               &obj->name);
++      spin_unlock(&dev->object_name_lock);
++      if (ret == -EAGAIN)
++              goto again;
+-              if (ret == -EAGAIN)
+-                      goto again;
+-
+-              if (ret != 0)
+-                      goto err;
+-
+-              /* Allocate a reference for the name table.  */
+-              drm_gem_object_reference(obj);
+-      } else {
+-              args->name = (uint64_t) obj->name;
+-              spin_unlock(&dev->object_name_lock);
+-              ret = 0;
++      if (ret != 0) {
++              mutex_lock(&dev->struct_mutex);
++              drm_gem_object_unreference(obj);
++              mutex_unlock(&dev->struct_mutex);
++              return ret;
+       }
+-err:
+-      mutex_lock(&dev->struct_mutex);
+-      drm_gem_object_unreference(obj);
+-      mutex_unlock(&dev->struct_mutex);
+-      return ret;
++      /*
++       * Leave the reference from the lookup around as the
++       * name table now holds one
++       */
++      args->name = (uint64_t) obj->name;
++
++      return 0;
+ }
+ /**
+@@ -450,7 +448,6 @@
+       spin_lock(&dev->object_name_lock);
+       if (obj->name) {
+               idr_remove(&dev->object_name_idr, obj->name);
+-              obj->name = 0;
+               spin_unlock(&dev->object_name_lock);
+               /*
+                * The object name held a reference to this object, drop
+@@ -463,26 +460,6 @@
+ }
+ EXPORT_SYMBOL(drm_gem_object_handle_free);
+-void drm_gem_vm_open(struct vm_area_struct *vma)
+-{
+-      struct drm_gem_object *obj = vma->vm_private_data;
+-
+-      drm_gem_object_reference(obj);
+-}
+-EXPORT_SYMBOL(drm_gem_vm_open);
+-
+-void drm_gem_vm_close(struct vm_area_struct *vma)
+-{
+-      struct drm_gem_object *obj = vma->vm_private_data;
+-      struct drm_device *dev = obj->dev;
+-
+-      mutex_lock(&dev->struct_mutex);
+-      drm_gem_object_unreference(obj);
+-      mutex_unlock(&dev->struct_mutex);
+-}
+-EXPORT_SYMBOL(drm_gem_vm_close);
+-
+-
+ /**
+  * drm_gem_mmap - memory map routine for GEM objects
+  * @filp: DRM file pointer
+@@ -544,14 +521,6 @@
+ #endif
+       vma->vm_page_prot = __pgprot(prot);
+-      /* Take a ref for this mapping of the object, so that the fault
+-       * handler can dereference the mmap offset's pointer to the object.
+-       * This reference is cleaned up by the corresponding vm_close
+-       * (which should happen whether the vma was created by this call, or
+-       * by a vm_open due to mremap or partial unmap or whatever).
+-       */
+-      drm_gem_object_reference(obj);
+-
+       vma->vm_file = filp;    /* Needed for drm_vm_open() */
+       drm_vm_open_locked(vma);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_irq.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_irq.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_irq.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_irq.c    2009-05-10 23:48:28.000000000 +0200
+@@ -276,7 +276,6 @@
+       for (i = 0; i < dev->num_crtcs; i++) {
+               DRM_WAKEUP(&dev->vbl_queue[i]);
+               dev->vblank_enabled[i] = 0;
+-              dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i);
+       }
+       spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+@@ -435,8 +434,6 @@
+  */
+ void drm_vblank_put(struct drm_device *dev, int crtc)
+ {
+-      BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+-
+       /* Last user schedules interrupt disable */
+       if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
+               mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
+@@ -462,9 +459,8 @@
+        * so that interrupts remain enabled in the interim.
+        */
+       if (!dev->vblank_inmodeset[crtc]) {
+-              dev->vblank_inmodeset[crtc] = 0x1;
+-              if (drm_vblank_get(dev, crtc) == 0)
+-                      dev->vblank_inmodeset[crtc] |= 0x2;
++              dev->vblank_inmodeset[crtc] = 1;
++              drm_vblank_get(dev, crtc);
+       }
+ }
+ EXPORT_SYMBOL(drm_vblank_pre_modeset);
+@@ -476,12 +472,9 @@
+       if (dev->vblank_inmodeset[crtc]) {
+               spin_lock_irqsave(&dev->vbl_lock, irqflags);
+               dev->vblank_disable_allowed = 1;
+-              spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+-
+-              if (dev->vblank_inmodeset[crtc] & 0x2)
+-                      drm_vblank_put(dev, crtc);
+-
+               dev->vblank_inmodeset[crtc] = 0;
++              spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
++              drm_vblank_put(dev, crtc);
+       }
+ }
+ EXPORT_SYMBOL(drm_vblank_post_modeset);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_lock.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_lock.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_lock.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_lock.c   2009-05-10 23:48:28.000000000 +0200
+@@ -80,7 +80,6 @@
+               __set_current_state(TASK_INTERRUPTIBLE);
+               if (!master->lock.hw_lock) {
+                       /* Device has been unregistered */
+-                      send_sig(SIGTERM, current, 0);
+                       ret = -EINTR;
+                       break;
+               }
+@@ -94,7 +93,7 @@
+               /* Contention */
+               schedule();
+               if (signal_pending(current)) {
+-                      ret = -EINTR;
++                      ret = -ERESTARTSYS;
+                       break;
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_memory.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_memory.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_memory.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_memory.c 2009-05-10 23:48:28.000000000 +0200
+@@ -171,14 +171,9 @@
+ void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev)
+ {
+-      if (drm_core_has_AGP(dev) &&
+-          dev->agp && dev->agp->cant_use_aperture && map->type == _DRM_AGP)
+-              map->handle = agp_remap(map->offset, map->size, dev);
+-      else
+-              map->handle = ioremap_wc(map->offset, map->size);
++      map->handle = ioremap_wc(map->offset, map->size);
+ }
+ EXPORT_SYMBOL(drm_core_ioremap_wc);
+-
+ void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev)
+ {
+       if (!map->handle || !map->size)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/drm_stub.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_stub.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/drm_stub.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/drm_stub.c   2009-05-10 23:48:28.000000000 +0200
+@@ -146,6 +146,14 @@
+       drm_ht_remove(&master->magiclist);
++      if (master->lock.hw_lock) {
++              if (dev->sigdata.lock == master->lock.hw_lock)
++                      dev->sigdata.lock = NULL;
++              master->lock.hw_lock = NULL;
++              master->lock.file_priv = NULL;
++              wake_up_interruptible(&master->lock.lock_queue);
++      }
++
+       drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
+ }
+@@ -168,7 +176,7 @@
+           file_priv->minor->master != file_priv->master) {
+               mutex_lock(&dev->struct_mutex);
+               file_priv->minor->master = drm_master_get(file_priv->master);
+-              mutex_unlock(&dev->struct_mutex);
++              mutex_lock(&dev->struct_mutex);
+       }
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_dma.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_dma.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_dma.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_dma.c      2009-05-10 23:48:28.000000000 +0200
+@@ -202,7 +202,7 @@
+               dev_priv->ring.map.flags = 0;
+               dev_priv->ring.map.mtrr = 0;
+-              drm_core_ioremap_wc(&dev_priv->ring.map, dev);
++              drm_core_ioremap(&dev_priv->ring.map, dev);
+               if (dev_priv->ring.map.handle == NULL) {
+                       i915_dma_cleanup(dev);
+@@ -731,11 +731,8 @@
+       case I915_PARAM_HAS_GEM:
+               value = dev_priv->has_gem;
+               break;
+-      case I915_PARAM_NUM_FENCES_AVAIL:
+-              value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
+-              break;
+       default:
+-              DRM_DEBUG("Unknown parameter %d\n", param->param);
++              DRM_ERROR("Unknown parameter %d\n", param->param);
+               return -EINVAL;
+       }
+@@ -767,15 +764,8 @@
+       case I915_SETPARAM_ALLOW_BATCHBUFFER:
+               dev_priv->allow_batchbuffer = param->value;
+               break;
+-      case I915_SETPARAM_NUM_USED_FENCES:
+-              if (param->value > dev_priv->num_fence_regs ||
+-                  param->value < 0)
+-                      return -EINVAL;
+-              /* Userspace can use first N regs */
+-              dev_priv->fence_reg_start = param->value;
+-              break;
+       default:
+-              DRM_DEBUG("unknown parameter %d\n", param->param);
++              DRM_ERROR("unknown parameter %d\n", param->param);
+               return -EINVAL;
+       }
+@@ -811,7 +801,7 @@
+       dev_priv->hws_map.flags = 0;
+       dev_priv->hws_map.mtrr = 0;
+-      drm_core_ioremap_wc(&dev_priv->hws_map, dev);
++      drm_core_ioremap(&dev_priv->hws_map, dev);
+       if (dev_priv->hws_map.handle == NULL) {
+               i915_dma_cleanup(dev);
+               dev_priv->status_gfx_addr = 0;
+@@ -976,6 +966,10 @@
+       if (ret)
+               goto kfree_devname;
++        dev_priv->mm.gtt_mapping =
++              io_mapping_create_wc(dev->agp->base,
++                                   dev->agp->agp_info.aper_size * 1024*1024);
++
+       /* Allow hardware batchbuffers unless told otherwise.
+        */
+       dev_priv->allow_batchbuffer = 1;
+@@ -1087,28 +1081,6 @@
+               goto free_priv;
+       }
+-        dev_priv->mm.gtt_mapping =
+-              io_mapping_create_wc(dev->agp->base,
+-                                   dev->agp->agp_info.aper_size * 1024*1024);
+-      if (dev_priv->mm.gtt_mapping == NULL) {
+-              ret = -EIO;
+-              goto out_rmmap;
+-      }
+-
+-      /* Set up a WC MTRR for non-PAT systems.  This is more common than
+-       * one would think, because the kernel disables PAT on first
+-       * generation Core chips because WC PAT gets overridden by a UC
+-       * MTRR if present.  Even if a UC MTRR isn't present.
+-       */
+-      dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
+-                                       dev->agp->agp_info.aper_size *
+-                                       1024 * 1024,
+-                                       MTRR_TYPE_WRCOMB, 1);
+-      if (dev_priv->mm.gtt_mtrr < 0) {
+-              DRM_INFO("MTRR allocation failed.  Graphics "
+-                       "performance may suffer.\n");
+-      }
+-
+ #ifdef CONFIG_HIGHMEM64G
+       /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+       dev_priv->has_gem = 0;
+@@ -1117,17 +1089,13 @@
+       dev_priv->has_gem = 1;
+ #endif
+-      dev->driver->get_vblank_counter = i915_get_vblank_counter;
+-      if (IS_GM45(dev))
+-              dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+-
+       i915_gem_load(dev);
+       /* Init HWS */
+       if (!I915_NEED_GFX_HWS(dev)) {
+               ret = i915_init_phys_hws(dev);
+               if (ret != 0)
+-                      goto out_iomapfree;
++                      goto out_rmmap;
+       }
+       /* On the 945G/GM, the chipset reports the MSI capability on the
+@@ -1166,8 +1134,6 @@
+       return 0;
+-out_iomapfree:
+-      io_mapping_free(dev_priv->mm.gtt_mapping);
+ out_rmmap:
+       iounmap(dev_priv->regs);
+ free_priv:
+@@ -1179,14 +1145,8 @@
+ {
+       struct drm_i915_private *dev_priv = dev->dev_private;
+-      io_mapping_free(dev_priv->mm.gtt_mapping);
+-      if (dev_priv->mm.gtt_mtrr >= 0) {
+-              mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
+-                       dev->agp->agp_info.aper_size * 1024 * 1024);
+-              dev_priv->mm.gtt_mtrr = -1;
+-      }
+-
+       if (drm_core_check_feature(dev, DRIVER_MODESET)) {
++              io_mapping_free(dev_priv->mm.gtt_mapping);
+               drm_irq_uninstall(dev);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_drv.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_drv.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_drv.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_drv.c      2009-05-10 23:48:28.000000000 +0200
+@@ -27,7 +27,6 @@
+  *
+  */
+-#include <linux/device.h>
+ #include "drmP.h"
+ #include "drm.h"
+ #include "i915_drm.h"
+@@ -67,14 +66,6 @@
+       i915_save_state(dev);
+-      /* If KMS is active, we do the leavevt stuff here */
+-      if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+-              if (i915_gem_idle(dev))
+-                      dev_err(&dev->pdev->dev,
+-                              "GEM idle failed, resume may fail\n");
+-              drm_irq_uninstall(dev);
+-      }
+-
+       intel_opregion_free(dev);
+       if (state.event == PM_EVENT_SUSPEND) {
+@@ -88,9 +79,6 @@
+ static int i915_resume(struct drm_device *dev)
+ {
+-      struct drm_i915_private *dev_priv = dev->dev_private;
+-      int ret = 0;
+-
+       pci_set_power_state(dev->pdev, PCI_D0);
+       pci_restore_state(dev->pdev);
+       if (pci_enable_device(dev->pdev))
+@@ -101,26 +89,11 @@
+       intel_opregion_init(dev);
+-      /* KMS EnterVT equivalent */
+-      if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+-              mutex_lock(&dev->struct_mutex);
+-              dev_priv->mm.suspended = 0;
+-
+-              ret = i915_gem_init_ringbuffer(dev);
+-              if (ret != 0)
+-                      ret = -1;
+-              mutex_unlock(&dev->struct_mutex);
+-
+-              drm_irq_install(dev);
+-      }
+-
+-      return ret;
++      return 0;
+ }
+ static struct vm_operations_struct i915_gem_vm_ops = {
+       .fault = i915_gem_fault,
+-      .open = drm_gem_vm_open,
+-      .close = drm_gem_vm_close,
+ };
+ static struct drm_driver driver = {
+@@ -139,6 +112,7 @@
+       .suspend = i915_suspend,
+       .resume = i915_resume,
+       .device_is_agp = i915_driver_device_is_agp,
++      .get_vblank_counter = i915_get_vblank_counter,
+       .enable_vblank = i915_enable_vblank,
+       .disable_vblank = i915_disable_vblank,
+       .irq_preinstall = i915_driver_irq_preinstall,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_drv.h linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_drv.h
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_drv.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_drv.h      2009-05-10 23:48:28.000000000 +0200
+@@ -184,8 +184,6 @@
+       unsigned int lvds_dither:1;
+       unsigned int lvds_vbt:1;
+       unsigned int int_crt_support:1;
+-      unsigned int lvds_use_ssc:1;
+-      int lvds_ssc_freq;
+       struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
+       int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
+@@ -279,13 +277,13 @@
+       u8 saveAR_INDEX;
+       u8 saveAR[21];
+       u8 saveDACMASK;
++      u8 saveDACDATA[256*3]; /* 256 3-byte colors */
+       u8 saveCR[37];
+       struct {
+               struct drm_mm gtt_space;
+               struct io_mapping *gtt_mapping;
+-              int gtt_mtrr;
+               /**
+                * List of objects currently involved in rendering from the
+@@ -456,12 +454,6 @@
+       /** for phy allocated objects */
+       struct drm_i915_gem_phys_object *phys_obj;
+-
+-      /**
+-       * Used for checking the object doesn't appear more than once
+-       * in an execbuffer object list.
+-       */
+-      int in_execbuffer;
+ };
+ /**
+@@ -542,7 +534,6 @@
+ extern int i915_enable_vblank(struct drm_device *dev, int crtc);
+ extern void i915_disable_vblank(struct drm_device *dev, int crtc);
+ extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
+-extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
+ extern int i915_vblank_swap(struct drm_device *dev, void *data,
+                           struct drm_file *file_priv);
+ extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+@@ -610,7 +601,6 @@
+ void i915_gem_free_object(struct drm_gem_object *obj);
+ int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
+ void i915_gem_object_unpin(struct drm_gem_object *obj);
+-int i915_gem_object_unbind(struct drm_gem_object *obj);
+ void i915_gem_lastclose(struct drm_device *dev);
+ uint32_t i915_get_gem_seqno(struct drm_device *dev);
+ void i915_gem_retire_requests(struct drm_device *dev);
+@@ -623,7 +613,6 @@
+ void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
+ int i915_gem_do_init(struct drm_device *dev, unsigned long start,
+                    unsigned long end);
+-int i915_gem_idle(struct drm_device *dev);
+ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+ int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+                                     int write);
+@@ -795,11 +784,6 @@
+                       IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev))
+ #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
+-/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
+- * rows, which changed the alignment requirements and fence programming.
+- */
+-#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
+-                                                    IS_I915GM(dev)))
+ #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev))
+ #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_gem.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_gem.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_gem.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_gem.c      2009-05-10 23:48:28.000000000 +0200
+@@ -34,6 +34,10 @@
+ #define I915_GEM_GPU_DOMAINS  (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
++static void
++i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
++                                uint32_t read_domains,
++                                uint32_t write_domain);
+ static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+ static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+ static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+@@ -48,7 +52,7 @@
+ static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
+ static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
+                                          unsigned alignment);
+-static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write);
++static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
+ static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
+ static int i915_gem_evict_something(struct drm_device *dev);
+ static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+@@ -563,7 +567,6 @@
+       pgoff_t page_offset;
+       unsigned long pfn;
+       int ret = 0;
+-      bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
+       /* We don't use vmf->pgoff since that has the fake offset */
+       page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
+@@ -582,13 +585,8 @@
+       /* Need a new fence register? */
+       if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+-          obj_priv->tiling_mode != I915_TILING_NONE) {
+-              ret = i915_gem_object_get_fence_reg(obj, write);
+-              if (ret) {
+-                      mutex_unlock(&dev->struct_mutex);
+-                      return VM_FAULT_SIGBUS;
+-              }
+-      }
++          obj_priv->tiling_mode != I915_TILING_NONE)
++              i915_gem_object_get_fence_reg(obj);
+       pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) +
+               page_offset;
+@@ -603,6 +601,8 @@
+       case -EAGAIN:
+               return VM_FAULT_OOM;
+       case -EFAULT:
++      case -EBUSY:
++              DRM_ERROR("can't insert pfn??  fault or busy...\n");
+               return VM_FAULT_SIGBUS;
+       default:
+               return VM_FAULT_NOPAGE;
+@@ -678,30 +678,6 @@
+       return ret;
+ }
+-static void
+-i915_gem_free_mmap_offset(struct drm_gem_object *obj)
+-{
+-      struct drm_device *dev = obj->dev;
+-      struct drm_i915_gem_object *obj_priv = obj->driver_private;
+-      struct drm_gem_mm *mm = dev->mm_private;
+-      struct drm_map_list *list;
+-
+-      list = &obj->map_list;
+-      drm_ht_remove_item(&mm->offset_hash, &list->hash);
+-
+-      if (list->file_offset_node) {
+-              drm_mm_put_block(list->file_offset_node);
+-              list->file_offset_node = NULL;
+-      }
+-
+-      if (list->map) {
+-              drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER);
+-              list->map = NULL;
+-      }
+-
+-      obj_priv->mmap_offset = 0;
+-}
+-
+ /**
+  * i915_gem_get_gtt_alignment - return required GTT alignment for an object
+  * @obj: object to check
+@@ -776,11 +752,8 @@
+       if (!obj_priv->mmap_offset) {
+               ret = i915_gem_create_mmap_offset(obj);
+-              if (ret) {
+-                      drm_gem_object_unreference(obj);
+-                      mutex_unlock(&dev->struct_mutex);
++              if (ret)
+                       return ret;
+-              }
+       }
+       args->offset = obj_priv->mmap_offset;
+@@ -1051,9 +1024,6 @@
+       drm_i915_private_t *dev_priv = dev->dev_private;
+       uint32_t seqno;
+-      if (!dev_priv->hw_status_page)
+-              return;
+-
+       seqno = i915_get_gem_seqno(dev);
+       while (!list_empty(&dev_priv->mm.request_list)) {
+@@ -1241,7 +1211,7 @@
+ /**
+  * Unbinds an object from the GTT aperture.
+  */
+-int
++static int
+ i915_gem_object_unbind(struct drm_gem_object *obj)
+ {
+       struct drm_device *dev = obj->dev;
+@@ -1475,26 +1445,21 @@
+       drm_i915_private_t *dev_priv = dev->dev_private;
+       struct drm_i915_gem_object *obj_priv = obj->driver_private;
+       int regnum = obj_priv->fence_reg;
+-      int tile_width;
+-      uint32_t fence_reg, val;
++      uint32_t val;
+       uint32_t pitch_val;
+       if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
+           (obj_priv->gtt_offset & (obj->size - 1))) {
+-              WARN(1, "%s: object 0x%08x not 1M or size (0x%zx) aligned\n",
+-                   __func__, obj_priv->gtt_offset, obj->size);
++              WARN(1, "%s: object not 1M or size aligned\n", __func__);
+               return;
+       }
+-      if (obj_priv->tiling_mode == I915_TILING_Y &&
+-          HAS_128_BYTE_Y_TILING(dev))
+-              tile_width = 128;
++      if (obj_priv->tiling_mode == I915_TILING_Y && (IS_I945G(dev) ||
++                                                     IS_I945GM(dev) ||
++                                                     IS_G33(dev)))
++              pitch_val = (obj_priv->stride / 128) - 1;
+       else
+-              tile_width = 512;
+-
+-      /* Note: pitch better be a power of two tile widths */
+-      pitch_val = obj_priv->stride / tile_width;
+-      pitch_val = ffs(pitch_val) - 1;
++              pitch_val = (obj_priv->stride / 512) - 1;
+       val = obj_priv->gtt_offset;
+       if (obj_priv->tiling_mode == I915_TILING_Y)
+@@ -1503,11 +1468,7 @@
+       val |= pitch_val << I830_FENCE_PITCH_SHIFT;
+       val |= I830_FENCE_REG_VALID;
+-      if (regnum < 8)
+-              fence_reg = FENCE_REG_830_0 + (regnum * 4);
+-      else
+-              fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+-      I915_WRITE(fence_reg, val);
++      I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+ }
+ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
+@@ -1522,8 +1483,7 @@
+       if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
+           (obj_priv->gtt_offset & (obj->size - 1))) {
+-              WARN(1, "%s: object 0x%08x not 1M or size aligned\n",
+-                   __func__, obj_priv->gtt_offset);
++              WARN(1, "%s: object not 1M or size aligned\n", __func__);
+               return;
+       }
+@@ -1543,7 +1503,6 @@
+ /**
+  * i915_gem_object_get_fence_reg - set up a fence reg for an object
+  * @obj: object to map through a fence reg
+- * @write: object is about to be written
+  *
+  * When mapping objects through the GTT, userspace wants to be able to write
+  * to them without having to worry about swizzling if the object is tiled.
+@@ -1554,77 +1513,49 @@
+  * It then sets up the reg based on the object's properties: address, pitch
+  * and tiling format.
+  */
+-static int
+-i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write)
++static void
++i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
+ {
+       struct drm_device *dev = obj->dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       struct drm_i915_gem_object *obj_priv = obj->driver_private;
+       struct drm_i915_fence_reg *reg = NULL;
+-      struct drm_i915_gem_object *old_obj_priv = NULL;
+-      int i, ret, avail;
++      int i, ret;
+       switch (obj_priv->tiling_mode) {
+       case I915_TILING_NONE:
+               WARN(1, "allocating a fence for non-tiled object?\n");
+               break;
+       case I915_TILING_X:
+-              if (!obj_priv->stride)
+-                      return -EINVAL;
+-              WARN((obj_priv->stride & (512 - 1)),
+-                   "object 0x%08x is X tiled but has non-512B pitch\n",
+-                   obj_priv->gtt_offset);
++              WARN(obj_priv->stride & (512 - 1),
++                   "object is X tiled but has non-512B pitch\n");
+               break;
+       case I915_TILING_Y:
+-              if (!obj_priv->stride)
+-                      return -EINVAL;
+-              WARN((obj_priv->stride & (128 - 1)),
+-                   "object 0x%08x is Y tiled but has non-128B pitch\n",
+-                   obj_priv->gtt_offset);
++              WARN(obj_priv->stride & (128 - 1),
++                   "object is Y tiled but has non-128B pitch\n");
+               break;
+       }
+       /* First try to find a free reg */
+-try_again:
+-      avail = 0;
+       for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
+               reg = &dev_priv->fence_regs[i];
+               if (!reg->obj)
+                       break;
+-
+-              old_obj_priv = reg->obj->driver_private;
+-              if (!old_obj_priv->pin_count)
+-                  avail++;
+       }
+       /* None available, try to steal one or wait for a user to finish */
+       if (i == dev_priv->num_fence_regs) {
+-              uint32_t seqno = dev_priv->mm.next_gem_seqno;
++              struct drm_i915_gem_object *old_obj_priv = NULL;
+               loff_t offset;
+-              if (avail == 0)
+-                      return -ENOMEM;
+-
++try_again:
++              /* Could try to use LRU here instead... */
+               for (i = dev_priv->fence_reg_start;
+                    i < dev_priv->num_fence_regs; i++) {
+-                      uint32_t this_seqno;
+-
+                       reg = &dev_priv->fence_regs[i];
+                       old_obj_priv = reg->obj->driver_private;
+-
+-                      if (old_obj_priv->pin_count)
+-                              continue;
+-
+-                      /* i915 uses fences for GPU access to tiled buffers */
+-                      if (IS_I965G(dev) || !old_obj_priv->active)
++                      if (!old_obj_priv->pin_count)
+                               break;
+-
+-                      /* find the seqno of the first available fence */
+-                      this_seqno = old_obj_priv->last_rendering_seqno;
+-                      if (this_seqno != 0 &&
+-                          reg->obj->write_domain == 0 &&
+-                          i915_seqno_passed(seqno, this_seqno))
+-                              seqno = this_seqno;
+               }
+               /*
+@@ -1632,25 +1563,14 @@
+                * objects to finish before trying again.
+                */
+               if (i == dev_priv->num_fence_regs) {
+-                      if (seqno == dev_priv->mm.next_gem_seqno) {
+-                              i915_gem_flush(dev,
+-                                             I915_GEM_GPU_DOMAINS,
+-                                             I915_GEM_GPU_DOMAINS);
+-                              seqno = i915_add_request(dev,
+-                                                       I915_GEM_GPU_DOMAINS);
+-                              if (seqno == 0)
+-                                      return -ENOMEM;
++                      ret = i915_gem_object_wait_rendering(reg->obj);
++                      if (ret) {
++                              WARN(ret, "wait_rendering failed: %d\n", ret);
++                              return;
+                       }
+-
+-                      ret = i915_wait_request(dev, seqno);
+-                      if (ret)
+-                              return ret;
+                       goto try_again;
+               }
+-              BUG_ON(old_obj_priv->active ||
+-                     (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+-
+               /*
+                * Zap this virtual mapping so we can set up a fence again
+                * for this object next time we need it.
+@@ -1671,8 +1591,6 @@
+               i915_write_fence_reg(reg);
+       else
+               i830_write_fence_reg(reg);
+-
+-      return 0;
+ }
+ /**
+@@ -1691,17 +1609,8 @@
+       if (IS_I965G(dev))
+               I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
+-      else {
+-              uint32_t fence_reg;
+-
+-              if (obj_priv->fence_reg < 8)
+-                      fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+-              else
+-                      fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+-                                                     8) * 4;
+-
+-              I915_WRITE(fence_reg, 0);
+-      }
++      else
++              I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+       dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
+       obj_priv->fence_reg = I915_FENCE_REG_NONE;
+@@ -1722,7 +1631,7 @@
+       if (dev_priv->mm.suspended)
+               return -EBUSY;
+       if (alignment == 0)
+-              alignment = i915_gem_get_gtt_alignment(obj);
++              alignment = PAGE_SIZE;
+       if (alignment & (PAGE_SIZE - 1)) {
+               DRM_ERROR("Invalid object alignment requested %u\n", alignment);
+               return -EINVAL;
+@@ -2065,28 +1974,30 @@
+  *            drm_agp_chipset_flush
+  */
+ static void
+-i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj)
++i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
++                                uint32_t read_domains,
++                                uint32_t write_domain)
+ {
+       struct drm_device               *dev = obj->dev;
+       struct drm_i915_gem_object      *obj_priv = obj->driver_private;
+       uint32_t                        invalidate_domains = 0;
+       uint32_t                        flush_domains = 0;
+-      BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU);
+-      BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU);
++      BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
++      BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
+ #if WATCH_BUF
+       DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
+                __func__, obj,
+-               obj->read_domains, obj->pending_read_domains,
+-               obj->write_domain, obj->pending_write_domain);
++               obj->read_domains, read_domains,
++               obj->write_domain, write_domain);
+ #endif
+       /*
+        * If the object isn't moving to a new write domain,
+        * let the object stay in multiple read domains
+        */
+-      if (obj->pending_write_domain == 0)
+-              obj->pending_read_domains |= obj->read_domains;
++      if (write_domain == 0)
++              read_domains |= obj->read_domains;
+       else
+               obj_priv->dirty = 1;
+@@ -2096,17 +2007,15 @@
+        * any read domains which differ from the old
+        * write domain
+        */
+-      if (obj->write_domain &&
+-          obj->write_domain != obj->pending_read_domains) {
++      if (obj->write_domain && obj->write_domain != read_domains) {
+               flush_domains |= obj->write_domain;
+-              invalidate_domains |=
+-                      obj->pending_read_domains & ~obj->write_domain;
++              invalidate_domains |= read_domains & ~obj->write_domain;
+       }
+       /*
+        * Invalidate any read caches which may have
+        * stale data. That is, any new read domains.
+        */
+-      invalidate_domains |= obj->pending_read_domains & ~obj->read_domains;
++      invalidate_domains |= read_domains & ~obj->read_domains;
+       if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) {
+ #if WATCH_BUF
+               DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
+@@ -2115,15 +2024,9 @@
+               i915_gem_clflush_object(obj);
+       }
+-      /* The actual obj->write_domain will be updated with
+-       * pending_write_domain after we emit the accumulated flush for all
+-       * of our domain changes in execbuffers (which clears objects'
+-       * write_domains).  So if we have a current write domain that we
+-       * aren't changing, set pending_write_domain to that.
+-       */
+-      if (flush_domains == 0 && obj->pending_write_domain == 0)
+-              obj->pending_write_domain = obj->write_domain;
+-      obj->read_domains = obj->pending_read_domains;
++      if ((write_domain | flush_domains) != 0)
++              obj->write_domain = write_domain;
++      obj->read_domains = read_domains;
+       dev->invalidate_domains |= invalidate_domains;
+       dev->flush_domains |= flush_domains;
+@@ -2326,8 +2229,6 @@
+                                 (int) reloc.offset,
+                                 reloc.read_domains,
+                                 reloc.write_domain);
+-                      drm_gem_object_unreference(target_obj);
+-                      i915_gem_object_unpin(obj);
+                       return -EINVAL;
+               }
+@@ -2514,7 +2415,6 @@
+       struct drm_i915_gem_exec_object *exec_list = NULL;
+       struct drm_gem_object **object_list = NULL;
+       struct drm_gem_object *batch_obj;
+-      struct drm_i915_gem_object *obj_priv;
+       int ret, i, pinned = 0;
+       uint64_t exec_offset;
+       uint32_t seqno, flush_domains;
+@@ -2558,15 +2458,13 @@
+       if (dev_priv->mm.wedged) {
+               DRM_ERROR("Execbuf while wedged\n");
+               mutex_unlock(&dev->struct_mutex);
+-              ret = -EIO;
+-              goto pre_mutex_err;
++              return -EIO;
+       }
+       if (dev_priv->mm.suspended) {
+               DRM_ERROR("Execbuf while VT-switched.\n");
+               mutex_unlock(&dev->struct_mutex);
+-              ret = -EBUSY;
+-              goto pre_mutex_err;
++              return -EBUSY;
+       }
+       /* Look up object handles */
+@@ -2579,15 +2477,6 @@
+                       ret = -EBADF;
+                       goto err;
+               }
+-
+-              obj_priv = object_list[i]->driver_private;
+-              if (obj_priv->in_execbuffer) {
+-                      DRM_ERROR("Object %p appears more than once in object list\n",
+-                                 object_list[i]);
+-                      ret = -EBADF;
+-                      goto err;
+-              }
+-              obj_priv->in_execbuffer = true;
+       }
+       /* Pin and relocate */
+@@ -2643,7 +2532,9 @@
+               struct drm_gem_object *obj = object_list[i];
+               /* Compute new gpu domains and update invalidate/flush */
+-              i915_gem_object_set_to_gpu_domain(obj);
++              i915_gem_object_set_to_gpu_domain(obj,
++                                                obj->pending_read_domains,
++                                                obj->pending_write_domain);
+       }
+       i915_verify_inactive(dev, __FILE__, __LINE__);
+@@ -2662,12 +2553,6 @@
+                       (void)i915_add_request(dev, dev->flush_domains);
+       }
+-      for (i = 0; i < args->buffer_count; i++) {
+-              struct drm_gem_object *obj = object_list[i];
+-
+-              obj->write_domain = obj->pending_write_domain;
+-      }
+-
+       i915_verify_inactive(dev, __FILE__, __LINE__);
+ #if WATCH_COHERENCY
+@@ -2725,32 +2610,24 @@
+       i915_verify_inactive(dev, __FILE__, __LINE__);
++      /* Copy the new buffer offsets back to the user's exec list. */
++      ret = copy_to_user((struct drm_i915_relocation_entry __user *)
++                         (uintptr_t) args->buffers_ptr,
++                         exec_list,
++                         sizeof(*exec_list) * args->buffer_count);
++      if (ret)
++              DRM_ERROR("failed to copy %d exec entries "
++                        "back to user (%d)\n",
++                         args->buffer_count, ret);
+ err:
+       for (i = 0; i < pinned; i++)
+               i915_gem_object_unpin(object_list[i]);
+-      for (i = 0; i < args->buffer_count; i++) {
+-              if (object_list[i]) {
+-                      obj_priv = object_list[i]->driver_private;
+-                      obj_priv->in_execbuffer = false;
+-              }
++      for (i = 0; i < args->buffer_count; i++)
+               drm_gem_object_unreference(object_list[i]);
+-      }
+       mutex_unlock(&dev->struct_mutex);
+-      if (!ret) {
+-              /* Copy the new buffer offsets back to the user's exec list. */
+-              ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+-                                 (uintptr_t) args->buffers_ptr,
+-                                 exec_list,
+-                                 sizeof(*exec_list) * args->buffer_count);
+-              if (ret)
+-                      DRM_ERROR("failed to copy %d exec entries "
+-                                "back to user (%d)\n",
+-                                args->buffer_count, ret);
+-      }
+-
+ pre_mutex_err:
+       drm_free(object_list, sizeof(*object_list) * args->buffer_count,
+                DRM_MEM_DRIVER);
+@@ -2772,22 +2649,7 @@
+               ret = i915_gem_object_bind_to_gtt(obj, alignment);
+               if (ret != 0) {
+                       if (ret != -EBUSY && ret != -ERESTARTSYS)
+-                              DRM_ERROR("Failure to bind: %d\n", ret);
+-                      return ret;
+-              }
+-      }
+-      /*
+-       * Pre-965 chips need a fence register set up in order to
+-       * properly handle tiled surfaces.
+-       */
+-      if (!IS_I965G(dev) &&
+-          obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+-          obj_priv->tiling_mode != I915_TILING_NONE) {
+-              ret = i915_gem_object_get_fence_reg(obj, true);
+-              if (ret != 0) {
+-                      if (ret != -EBUSY && ret != -ERESTARTSYS)
+-                              DRM_ERROR("Failure to install fence: %d\n",
+-                                        ret);
++                              DRM_ERROR("Failure to bind: %d", ret);
+                       return ret;
+               }
+       }
+@@ -2861,7 +2723,6 @@
+       if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
+               DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
+                         args->handle);
+-              drm_gem_object_unreference(obj);
+               mutex_unlock(&dev->struct_mutex);
+               return -EINVAL;
+       }
+@@ -2942,13 +2803,6 @@
+               return -EBADF;
+       }
+-      /* Update the active list for the hardware's current position.
+-       * Otherwise this only updates on a delayed timer or when irqs are
+-       * actually unmasked, and our working set ends up being larger than
+-       * required.
+-       */
+-      i915_gem_retire_requests(dev);
+-
+       obj_priv = obj->driver_private;
+       /* Don't count being on the flushing list against the object being
+        * done.  Otherwise, a buffer left on the flushing list but not getting
+@@ -3001,6 +2855,9 @@
+ void i915_gem_free_object(struct drm_gem_object *obj)
+ {
+       struct drm_device *dev = obj->dev;
++      struct drm_gem_mm *mm = dev->mm_private;
++      struct drm_map_list *list;
++      struct drm_map *map;
+       struct drm_i915_gem_object *obj_priv = obj->driver_private;
+       while (obj_priv->pin_count > 0)
+@@ -3011,7 +2868,19 @@
+       i915_gem_object_unbind(obj);
+-      i915_gem_free_mmap_offset(obj);
++      list = &obj->map_list;
++      drm_ht_remove_item(&mm->offset_hash, &list->hash);
++
++      if (list->file_offset_node) {
++              drm_mm_put_block(list->file_offset_node);
++              list->file_offset_node = NULL;
++      }
++
++      map = list->map;
++      if (map) {
++              drm_free(map, sizeof(*map), DRM_MEM_DRIVER);
++              list->map = NULL;
++      }
+       drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+       drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
+@@ -3050,7 +2919,7 @@
+       return 0;
+ }
+-int
++static int
+ i915_gem_idle(struct drm_device *dev)
+ {
+       drm_i915_private_t *dev_priv = dev->dev_private;
+@@ -3196,7 +3065,6 @@
+       if (dev_priv->hw_status_page == NULL) {
+               DRM_ERROR("Failed to map status page.\n");
+               memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+-              i915_gem_object_unpin(obj);
+               drm_gem_object_unreference(obj);
+               return -EINVAL;
+       }
+@@ -3209,31 +3077,6 @@
+       return 0;
+ }
+-static void
+-i915_gem_cleanup_hws(struct drm_device *dev)
+-{
+-      drm_i915_private_t *dev_priv = dev->dev_private;
+-      struct drm_gem_object *obj;
+-      struct drm_i915_gem_object *obj_priv;
+-
+-      if (dev_priv->hws_obj == NULL)
+-              return;
+-
+-      obj = dev_priv->hws_obj;
+-      obj_priv = obj->driver_private;
+-
+-      kunmap(obj_priv->page_list[0]);
+-      i915_gem_object_unpin(obj);
+-      drm_gem_object_unreference(obj);
+-      dev_priv->hws_obj = NULL;
+-
+-      memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+-      dev_priv->hw_status_page = NULL;
+-
+-      /* Write high address into HWS_PGA when disabling. */
+-      I915_WRITE(HWS_PGA, 0x1ffff000);
+-}
+-
+ int
+ i915_gem_init_ringbuffer(struct drm_device *dev)
+ {
+@@ -3251,7 +3094,6 @@
+       obj = drm_gem_object_alloc(dev, 128 * 1024);
+       if (obj == NULL) {
+               DRM_ERROR("Failed to allocate ringbuffer\n");
+-              i915_gem_cleanup_hws(dev);
+               return -ENOMEM;
+       }
+       obj_priv = obj->driver_private;
+@@ -3259,7 +3101,6 @@
+       ret = i915_gem_object_pin(obj, 4096);
+       if (ret != 0) {
+               drm_gem_object_unreference(obj);
+-              i915_gem_cleanup_hws(dev);
+               return ret;
+       }
+@@ -3277,9 +3118,7 @@
+       if (ring->map.handle == NULL) {
+               DRM_ERROR("Failed to map ringbuffer.\n");
+               memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+-              i915_gem_object_unpin(obj);
+               drm_gem_object_unreference(obj);
+-              i915_gem_cleanup_hws(dev);
+               return -EINVAL;
+       }
+       ring->ring_obj = obj;
+@@ -3359,7 +3198,20 @@
+       dev_priv->ring.ring_obj = NULL;
+       memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+-      i915_gem_cleanup_hws(dev);
++      if (dev_priv->hws_obj != NULL) {
++              struct drm_gem_object *obj = dev_priv->hws_obj;
++              struct drm_i915_gem_object *obj_priv = obj->driver_private;
++
++              kunmap(obj_priv->page_list[0]);
++              i915_gem_object_unpin(obj);
++              drm_gem_object_unreference(obj);
++              dev_priv->hws_obj = NULL;
++              memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
++              dev_priv->hw_status_page = NULL;
++
++              /* Write high address into HWS_PGA when disabling. */
++              I915_WRITE(HWS_PGA, 0x1ffff000);
++      }
+ }
+ int
+@@ -3377,6 +3229,10 @@
+               dev_priv->mm.wedged = 0;
+       }
++      dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base,
++                                                      dev->agp->agp_info.aper_size
++                                                      * 1024 * 1024);
++
+       mutex_lock(&dev->struct_mutex);
+       dev_priv->mm.suspended = 0;
+@@ -3399,6 +3255,7 @@
+ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
+                      struct drm_file *file_priv)
+ {
++      drm_i915_private_t *dev_priv = dev->dev_private;
+       int ret;
+       if (drm_core_check_feature(dev, DRIVER_MODESET))
+@@ -3407,6 +3264,7 @@
+       ret = i915_gem_idle(dev);
+       drm_irq_uninstall(dev);
++      io_mapping_free(dev_priv->mm.gtt_mapping);
+       return ret;
+ }
+@@ -3415,9 +3273,6 @@
+ {
+       int ret;
+-      if (drm_core_check_feature(dev, DRIVER_MODESET))
+-              return;
+-
+       ret = i915_gem_idle(dev);
+       if (ret)
+               DRM_ERROR("failed to idle hardware: %d\n", ret);
+@@ -3439,7 +3294,7 @@
+       /* Old X drivers will take 0-2 for front, back, depth buffers */
+       dev_priv->fence_reg_start = 3;
+-      if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
++      if (IS_I965G(dev))
+               dev_priv->num_fence_regs = 16;
+       else
+               dev_priv->num_fence_regs = 8;
+@@ -3615,7 +3470,7 @@
+       user_data = (char __user *) (uintptr_t) args->data_ptr;
+       obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+-      DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size);
++      DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+       ret = copy_from_user(obj_addr, user_data, args->size);
+       if (ret)
+               return -EFAULT;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_gem_tiling.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_gem_tiling.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_gem_tiling.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_gem_tiling.c       2009-05-10 23:48:28.000000000 +0200
+@@ -173,73 +173,6 @@
+       dev_priv->mm.bit_6_swizzle_y = swizzle_y;
+ }
+-
+-/**
+- * Returns the size of the fence for a tiled object of the given size.
+- */
+-static int
+-i915_get_fence_size(struct drm_device *dev, int size)
+-{
+-      int i;
+-      int start;
+-
+-      if (IS_I965G(dev)) {
+-              /* The 965 can have fences at any page boundary. */
+-              return ALIGN(size, 4096);
+-      } else {
+-              /* Align the size to a power of two greater than the smallest
+-               * fence size.
+-               */
+-              if (IS_I9XX(dev))
+-                      start = 1024 * 1024;
+-              else
+-                      start = 512 * 1024;
+-
+-              for (i = start; i < size; i <<= 1)
+-                      ;
+-
+-              return i;
+-      }
+-}
+-
+-/* Check pitch constriants for all chips & tiling formats */
+-static bool
+-i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
+-{
+-      int tile_width;
+-
+-      /* Linear is always fine */
+-      if (tiling_mode == I915_TILING_NONE)
+-              return true;
+-
+-      if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+-              tile_width = 128;
+-      else
+-              tile_width = 512;
+-
+-      /* 965+ just needs multiples of tile width */
+-      if (IS_I965G(dev)) {
+-              if (stride & (tile_width - 1))
+-                      return false;
+-              return true;
+-      }
+-
+-      /* Pre-965 needs power of two tile widths */
+-      if (stride < tile_width)
+-              return false;
+-
+-      if (stride & (stride - 1))
+-              return false;
+-
+-      /* We don't handle the aperture area covered by the fence being bigger
+-       * than the object size.
+-       */
+-      if (i915_get_fence_size(dev, size) != size)
+-              return false;
+-
+-      return true;
+-}
+-
+ /**
+  * Sets the tiling mode of an object, returning the required swizzling of
+  * bit 6 of addresses in the object.
+@@ -258,11 +191,6 @@
+               return -EINVAL;
+       obj_priv = obj->driver_private;
+-      if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
+-              drm_gem_object_unreference(obj);
+-              return -EINVAL;
+-      }
+-
+       mutex_lock(&dev->struct_mutex);
+       if (args->tiling_mode == I915_TILING_NONE) {
+@@ -279,29 +207,13 @@
+                       args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+               }
+       }
+-      if (args->tiling_mode != obj_priv->tiling_mode) {
+-              int ret;
+-
+-              /* Unbind the object, as switching tiling means we're
+-               * switching the cache organization due to fencing, probably.
+-               */
+-              ret = i915_gem_object_unbind(obj);
+-              if (ret != 0) {
+-                      WARN(ret != -ERESTARTSYS,
+-                           "failed to unbind object for tiling switch");
+-                      args->tiling_mode = obj_priv->tiling_mode;
+-                      mutex_unlock(&dev->struct_mutex);
+-                      drm_gem_object_unreference(obj);
+-
+-                      return ret;
+-              }
+-              obj_priv->tiling_mode = args->tiling_mode;
+-      }
++      obj_priv->tiling_mode = args->tiling_mode;
+       obj_priv->stride = args->stride;
+-      drm_gem_object_unreference(obj);
+       mutex_unlock(&dev->struct_mutex);
++      drm_gem_object_unreference(obj);
++
+       return 0;
+ }
+@@ -339,8 +251,9 @@
+               DRM_ERROR("unknown tiling mode\n");
+       }
+-      drm_gem_object_unreference(obj);
+       mutex_unlock(&dev->struct_mutex);
++      drm_gem_object_unreference(obj);
++
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_irq.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_irq.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_irq.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_irq.c      2009-05-10 23:48:28.000000000 +0200
+@@ -174,19 +174,6 @@
+       return count;
+ }
+-u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
+-{
+-      drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+-      int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
+-
+-      if (!i915_pipe_enabled(dev, pipe)) {
+-              DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+-              return 0;
+-      }
+-
+-      return I915_READ(reg);
+-}
+-
+ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
+ {
+       struct drm_device *dev = (struct drm_device *) arg;
+@@ -383,13 +370,12 @@
+       drm_i915_irq_emit_t *emit = data;
+       int result;
++      RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
++
+       if (!dev_priv) {
+               DRM_ERROR("called with no initialization\n");
+               return -EINVAL;
+       }
+-
+-      RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+-
+       mutex_lock(&dev->struct_mutex);
+       result = i915_emit_irq(dev);
+       mutex_unlock(&dev->struct_mutex);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_reg.h linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_reg.h
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_reg.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_reg.h      2009-05-10 23:48:28.000000000 +0200
+@@ -184,15 +184,14 @@
+  * Fence registers
+  */
+ #define FENCE_REG_830_0                       0x2000
+-#define FENCE_REG_945_8                       0x3000
+ #define   I830_FENCE_START_MASK               0x07f80000
+ #define   I830_FENCE_TILING_Y_SHIFT   12
+-#define   I830_FENCE_SIZE_BITS(size)  ((ffs((size) >> 19) - 1) << 8)
++#define   I830_FENCE_SIZE_BITS(size)  ((get_order(size >> 19) - 1) << 8)
+ #define   I830_FENCE_PITCH_SHIFT      4
+ #define   I830_FENCE_REG_VALID                (1<<0)
+ #define   I915_FENCE_START_MASK               0x0ff00000
+-#define   I915_FENCE_SIZE_BITS(size)  ((ffs((size) >> 20) - 1) << 8)
++#define   I915_FENCE_SIZE_BITS(size)  ((get_order(size >> 20) - 1) << 8)
+ #define FENCE_REG_965_0                       0x03000
+ #define   I965_FENCE_PITCH_SHIFT      2
+@@ -1372,9 +1371,6 @@
+ #define   PIPE_FRAME_LOW_SHIFT    24
+ #define   PIPE_PIXEL_MASK         0x00ffffff
+ #define   PIPE_PIXEL_SHIFT        0
+-/* GM45+ just has to be different */
+-#define PIPEA_FRMCOUNT_GM45   0x70040
+-#define PIPEA_FLIPCOUNT_GM45  0x70044
+ /* Cursor A & B regs */
+ #define CURACNTR              0x70080
+@@ -1443,9 +1439,6 @@
+ #define PIPEBSTAT             0x71024
+ #define PIPEBFRAMEHIGH                0x71040
+ #define PIPEBFRAMEPIXEL               0x71044
+-#define PIPEB_FRMCOUNT_GM45   0x71040
+-#define PIPEB_FLIPCOUNT_GM45  0x71044
+-
+ /* Display B control */
+ #define DSPBCNTR              0x71180
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_suspend.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_suspend.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/i915_suspend.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/i915_suspend.c  2009-05-10 23:48:28.000000000 +0200
+@@ -119,6 +119,11 @@
+       /* VGA color palette registers */
+       dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
++      /* DACCRX automatically increments during read */
++      I915_WRITE8(VGA_DACRX, 0);
++      /* Read 3 bytes of color data from each index */
++      for (i = 0; i < 256 * 3; i++)
++              dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
+       /* MSR bits */
+       dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
+@@ -220,6 +225,12 @@
+       /* VGA color palette registers */
+       I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
++      /* DACCRX automatically increments during read */
++      I915_WRITE8(VGA_DACWX, 0);
++      /* Read 3 bytes of color data from each index */
++      for (i = 0; i < 256 * 3; i++)
++              I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
++
+ }
+ int i915_save_state(struct drm_device *dev)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_bios.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_bios.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_bios.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_bios.c    2009-05-10 23:48:28.000000000 +0200
+@@ -111,12 +111,6 @@
+       panel_fixed_mode->clock = dvo_timing->clock * 10;
+       panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+-      /* Some VBTs have bogus h/vtotal values */
+-      if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+-              panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+-      if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+-              panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+-
+       drm_mode_set_name(panel_fixed_mode);
+       dev_priv->vbt_mode = panel_fixed_mode;
+@@ -141,14 +135,6 @@
+       if (general) {
+               dev_priv->int_tv_support = general->int_tv_support;
+               dev_priv->int_crt_support = general->int_crt_support;
+-              dev_priv->lvds_use_ssc = general->enable_ssc;
+-
+-              if (dev_priv->lvds_use_ssc) {
+-                if (IS_I855(dev_priv->dev))
+-                  dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
+-                else
+-                  dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+-              }
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_display.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_display.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_display.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_display.c 2009-05-10 23:48:28.000000000 +0200
+@@ -90,12 +90,12 @@
+ #define I9XX_DOT_MAX           400000
+ #define I9XX_VCO_MIN          1400000
+ #define I9XX_VCO_MAX          2800000
+-#define I9XX_N_MIN                  1
+-#define I9XX_N_MAX                  6
++#define I9XX_N_MIN                  3
++#define I9XX_N_MAX                  8
+ #define I9XX_M_MIN                 70
+ #define I9XX_M_MAX                120
+ #define I9XX_M1_MIN                10
+-#define I9XX_M1_MAX                22
++#define I9XX_M1_MAX                20
+ #define I9XX_M2_MIN                 5
+ #define I9XX_M2_MAX                 9
+ #define I9XX_P_SDVO_DAC_MIN         5
+@@ -189,7 +189,9 @@
+       return limit;
+ }
+-static void intel_clock(int refclk, intel_clock_t *clock)
++/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
++
++static void i8xx_clock(int refclk, intel_clock_t *clock)
+ {
+       clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+       clock->p = clock->p1 * clock->p2;
+@@ -197,6 +199,25 @@
+       clock->dot = clock->vco / clock->p;
+ }
++/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
++
++static void i9xx_clock(int refclk, intel_clock_t *clock)
++{
++      clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
++      clock->p = clock->p1 * clock->p2;
++      clock->vco = refclk * clock->m / (clock->n + 2);
++      clock->dot = clock->vco / clock->p;
++}
++
++static void intel_clock(struct drm_device *dev, int refclk,
++                      intel_clock_t *clock)
++{
++      if (IS_I9XX(dev))
++              i9xx_clock (refclk, clock);
++      else
++              i8xx_clock (refclk, clock);
++}
++
+ /**
+  * Returns whether any output on the specified pipe is of the specified type
+  */
+@@ -217,7 +238,7 @@
+     return false;
+ }
+-#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
++#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+ /**
+  * Returns whether the given set of divisors are valid for a given refclk with
+  * the given connectors.
+@@ -297,7 +318,7 @@
+                                    clock.p1 <= limit->p1.max; clock.p1++) {
+                                       int this_err;
+-                                      intel_clock(refclk, &clock);
++                                      intel_clock(dev, refclk, &clock);
+                                       if (!intel_PLL_is_valid(crtc, &clock))
+                                               continue;
+@@ -322,7 +343,7 @@
+       udelay(20000);
+ }
+-static int
++static void
+ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+                   struct drm_framebuffer *old_fb)
+ {
+@@ -340,21 +361,11 @@
+       int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+       int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+       u32 dspcntr, alignment;
+-      int ret;
+       /* no fb bound */
+       if (!crtc->fb) {
+               DRM_DEBUG("No FB bound\n");
+-              return 0;
+-      }
+-
+-      switch (pipe) {
+-      case 0:
+-      case 1:
+-              break;
+-      default:
+-              DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+-              return -EINVAL;
++              return;
+       }
+       intel_fb = to_intel_framebuffer(crtc->fb);
+@@ -366,30 +377,28 @@
+               alignment = 64 * 1024;
+               break;
+       case I915_TILING_X:
+-              /* pin() will align the object as required by fence */
+-              alignment = 0;
++              if (IS_I9XX(dev))
++                      alignment = 1024 * 1024;
++              else
++                      alignment = 512 * 1024;
+               break;
+       case I915_TILING_Y:
+               /* FIXME: Is this true? */
+               DRM_ERROR("Y tiled not allowed for scan out buffers\n");
+-              return -EINVAL;
++              return;
+       default:
+               BUG();
+       }
+-      mutex_lock(&dev->struct_mutex);
+-      ret = i915_gem_object_pin(intel_fb->obj, alignment);
+-      if (ret != 0) {
+-              mutex_unlock(&dev->struct_mutex);
+-              return ret;
+-      }
++      if (i915_gem_object_pin(intel_fb->obj, alignment))
++              return;
+-      ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+-      if (ret != 0) {
+-              i915_gem_object_unpin(intel_fb->obj);
+-              mutex_unlock(&dev->struct_mutex);
+-              return ret;
+-      }
++      i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
++
++      Start = obj_priv->gtt_offset;
++      Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
++
++      I915_WRITE(dspstride, crtc->fb->pitch);
+       dspcntr = I915_READ(dspcntr_reg);
+       /* Mask out pixel format bits in case we change it */
+@@ -410,17 +419,11 @@
+               break;
+       default:
+               DRM_ERROR("Unknown color depth\n");
+-              i915_gem_object_unpin(intel_fb->obj);
+-              mutex_unlock(&dev->struct_mutex);
+-              return -EINVAL;
++              return;
+       }
+       I915_WRITE(dspcntr_reg, dspcntr);
+-      Start = obj_priv->gtt_offset;
+-      Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+-
+       DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+-      I915_WRITE(dspstride, crtc->fb->pitch);
+       if (IS_I965G(dev)) {
+               I915_WRITE(dspbase, Offset);
+               I915_READ(dspbase);
+@@ -437,24 +440,27 @@
+               intel_fb = to_intel_framebuffer(old_fb);
+               i915_gem_object_unpin(intel_fb->obj);
+       }
+-      mutex_unlock(&dev->struct_mutex);
+       if (!dev->primary->master)
+-              return 0;
++              return;
+       master_priv = dev->primary->master->driver_priv;
+       if (!master_priv->sarea_priv)
+-              return 0;
++              return;
+-      if (pipe) {
+-              master_priv->sarea_priv->pipeB_x = x;
+-              master_priv->sarea_priv->pipeB_y = y;
+-      } else {
++      switch (pipe) {
++      case 0:
+               master_priv->sarea_priv->pipeA_x = x;
+               master_priv->sarea_priv->pipeA_y = y;
++              break;
++      case 1:
++              master_priv->sarea_priv->pipeB_x = x;
++              master_priv->sarea_priv->pipeB_y = y;
++              break;
++      default:
++              DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
++              break;
+       }
+-
+-      return 0;
+ }
+@@ -702,11 +708,11 @@
+       return 1;
+ }
+-static int intel_crtc_mode_set(struct drm_crtc *crtc,
+-                             struct drm_display_mode *mode,
+-                             struct drm_display_mode *adjusted_mode,
+-                             int x, int y,
+-                             struct drm_framebuffer *old_fb)
++static void intel_crtc_mode_set(struct drm_crtc *crtc,
++                              struct drm_display_mode *mode,
++                              struct drm_display_mode *adjusted_mode,
++                              int x, int y,
++                              struct drm_framebuffer *old_fb)
+ {
+       struct drm_device *dev = crtc->dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+@@ -726,14 +732,13 @@
+       int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+       int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+       int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+-      int refclk, num_outputs = 0;
++      int refclk;
+       intel_clock_t clock;
+       u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+       bool ok, is_sdvo = false, is_dvo = false;
+       bool is_crt = false, is_lvds = false, is_tv = false;
+       struct drm_mode_config *mode_config = &dev->mode_config;
+       struct drm_connector *connector;
+-      int ret;
+       drm_vblank_pre_modeset(dev, pipe);
+@@ -750,8 +755,6 @@
+               case INTEL_OUTPUT_SDVO:
+               case INTEL_OUTPUT_HDMI:
+                       is_sdvo = true;
+-                      if (intel_output->needs_tv_clock)
+-                              is_tv = true;
+                       break;
+               case INTEL_OUTPUT_DVO:
+                       is_dvo = true;
+@@ -763,14 +766,9 @@
+                       is_crt = true;
+                       break;
+               }
+-
+-              num_outputs++;
+       }
+-      if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
+-              refclk = dev_priv->lvds_ssc_freq * 1000;
+-              DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
+-      } else if (IS_I9XX(dev)) {
++      if (IS_I9XX(dev)) {
+               refclk = 96000;
+       } else {
+               refclk = 48000;
+@@ -779,7 +777,7 @@
+       ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
+       if (!ok) {
+               DRM_ERROR("Couldn't find PLL settings for mode!\n");
+-              return -EINVAL;
++              return;
+       }
+       fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+@@ -829,14 +827,11 @@
+               }
+       }
+-      if (is_sdvo && is_tv)
+-              dpll |= PLL_REF_INPUT_TVCLKINBC;
+-      else if (is_tv)
++      if (is_tv) {
+               /* XXX: just matching BIOS for now */
+-              /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
++/*    dpll |= PLL_REF_INPUT_TVCLKINBC; */
+               dpll |= 3;
+-      else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
+-              dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
++      }
+       else
+               dpll |= PLL_REF_INPUT_DREFCLK;
+@@ -953,13 +948,9 @@
+       I915_WRITE(dspcntr_reg, dspcntr);
+       /* Flush the plane changes */
+-      ret = intel_pipe_set_base(crtc, x, y, old_fb);
+-      if (ret != 0)
+-          return ret;
++      intel_pipe_set_base(crtc, x, y, old_fb);
+       drm_vblank_post_modeset(dev, pipe);
+-
+-      return 0;
+ }
+ /** Loads the palette/gamma unit for the CRTC with the prepared values */
+@@ -1008,7 +999,6 @@
+               temp = CURSOR_MODE_DISABLE;
+               addr = 0;
+               bo = NULL;
+-              mutex_lock(&dev->struct_mutex);
+               goto finish;
+       }
+@@ -1031,19 +1021,18 @@
+       }
+       /* we only need to pin inside GTT if cursor is non-phy */
+-      mutex_lock(&dev->struct_mutex);
+       if (!dev_priv->cursor_needs_physical) {
+               ret = i915_gem_object_pin(bo, PAGE_SIZE);
+               if (ret) {
+                       DRM_ERROR("failed to pin cursor bo\n");
+-                      goto fail_locked;
++                      goto fail;
+               }
+               addr = obj_priv->gtt_offset;
+       } else {
+               ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+               if (ret) {
+                       DRM_ERROR("failed to attach phys object\n");
+-                      goto fail_locked;
++                      goto fail;
+               }
+               addr = obj_priv->phys_obj->handle->busaddr;
+       }
+@@ -1063,9 +1052,10 @@
+                               i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+               } else
+                       i915_gem_object_unpin(intel_crtc->cursor_bo);
++              mutex_lock(&dev->struct_mutex);
+               drm_gem_object_unreference(intel_crtc->cursor_bo);
++              mutex_unlock(&dev->struct_mutex);
+       }
+-      mutex_unlock(&dev->struct_mutex);
+       intel_crtc->cursor_addr = addr;
+       intel_crtc->cursor_bo = bo;
+@@ -1073,7 +1063,6 @@
+       return 0;
+ fail:
+       mutex_lock(&dev->struct_mutex);
+-fail_locked:
+       drm_gem_object_unreference(bo);
+       mutex_unlock(&dev->struct_mutex);
+       return ret;
+@@ -1301,7 +1290,7 @@
+               }
+               /* XXX: Handle the 100Mhz refclk */
+-              intel_clock(96000, &clock);
++              i9xx_clock(96000, &clock);
+       } else {
+               bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
+@@ -1313,9 +1302,9 @@
+                       if ((dpll & PLL_REF_INPUT_MASK) ==
+                           PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+                               /* XXX: might not be 66MHz */
+-                              intel_clock(66000, &clock);
++                              i8xx_clock(66000, &clock);
+                       } else
+-                              intel_clock(48000, &clock);
++                              i8xx_clock(48000, &clock);
+               } else {
+                       if (dpll & PLL_P1_DIVIDE_BY_TWO)
+                               clock.p1 = 2;
+@@ -1328,7 +1317,7 @@
+                       else
+                               clock.p2 = 2;
+-                      intel_clock(48000, &clock);
++                      i8xx_clock(48000, &clock);
+               }
+       }
+@@ -1463,7 +1452,6 @@
+ static void intel_setup_outputs(struct drm_device *dev)
+ {
+-      struct drm_i915_private *dev_priv = dev->dev_private;
+       struct drm_connector *connector;
+       intel_crt_init(dev);
+@@ -1475,16 +1463,13 @@
+       if (IS_I9XX(dev)) {
+               int found;
+-              if (I915_READ(SDVOB) & SDVO_DETECTED) {
+-                      found = intel_sdvo_init(dev, SDVOB);
+-                      if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+-                              intel_hdmi_init(dev, SDVOB);
+-              }
+-              if (!IS_G4X(dev) || (I915_READ(SDVOB) & SDVO_DETECTED)) {
+-                      found = intel_sdvo_init(dev, SDVOC);
+-                      if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+-                              intel_hdmi_init(dev, SDVOC);
+-              }
++              found = intel_sdvo_init(dev, SDVOB);
++              if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
++                      intel_hdmi_init(dev, SDVOB);
++
++              found = intel_sdvo_init(dev, SDVOC);
++              if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
++                      intel_hdmi_init(dev, SDVOC);
+       } else
+               intel_dvo_init(dev);
+@@ -1607,9 +1592,7 @@
+       ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
+       if (ret) {
+-              mutex_lock(&dev->struct_mutex);
+               drm_gem_object_unreference(obj);
+-              mutex_unlock(&dev->struct_mutex);
+               return NULL;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_drv.h linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_drv.h
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_drv.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_drv.h     2009-05-10 23:48:28.000000000 +0200
+@@ -82,7 +82,6 @@
+       struct intel_i2c_chan *i2c_bus; /* for control functions */
+       struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+       bool load_detect_temp;
+-      bool needs_tv_clock;
+       void *dev_priv;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_fb.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_fb.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_fb.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_fb.c      2009-05-10 23:48:28.000000000 +0200
+@@ -473,7 +473,7 @@
+       ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
+       if (ret) {
+               DRM_ERROR("failed to allocate fb.\n");
+-              goto out_unpin;
++              goto out_unref;
+       }
+       list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
+@@ -484,7 +484,7 @@
+       info = framebuffer_alloc(sizeof(struct intelfb_par), device);
+       if (!info) {
+               ret = -ENOMEM;
+-              goto out_unpin;
++              goto out_unref;
+       }
+       par = info->par;
+@@ -513,7 +513,7 @@
+                                      size);
+       if (!info->screen_base) {
+               ret = -ENOSPC;
+-              goto out_unpin;
++              goto out_unref;
+       }
+       info->screen_size = size;
+@@ -608,8 +608,6 @@
+       mutex_unlock(&dev->struct_mutex);
+       return 0;
+-out_unpin:
+-      i915_gem_object_unpin(fbo);
+ out_unref:
+       drm_gem_object_unreference(fbo);
+       mutex_unlock(&dev->struct_mutex);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_lvds.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_lvds.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_lvds.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_lvds.c    2009-05-10 23:48:28.000000000 +0200
+@@ -27,7 +27,6 @@
+  *      Jesse Barnes <jesse.barnes@intel.com>
+  */
+-#include <linux/dmi.h>
+ #include <linux/i2c.h>
+ #include "drmP.h"
+ #include "drm.h"
+@@ -312,8 +311,10 @@
+       if (dev_priv->panel_fixed_mode != NULL) {
+               struct drm_display_mode *mode;
++              mutex_unlock(&dev->mode_config.mutex);
+               mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+               drm_mode_probed_add(connector, mode);
++              mutex_unlock(&dev->mode_config.mutex);
+               return 1;
+       }
+@@ -404,16 +405,6 @@
+       u32 lvds;
+       int pipe;
+-      /* Blacklist machines that we know falsely report LVDS. */
+-      /* FIXME: add a check for the Aopen Mini PC */
+-
+-      /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
+-      if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
+-         dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
+-              DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+-              return;
+-      }
+-
+       intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+       if (!intel_output) {
+               return;
+@@ -467,7 +458,7 @@
+                       dev_priv->panel_fixed_mode =
+                               drm_mode_duplicate(dev, scan);
+                       mutex_unlock(&dev->mode_config.mutex);
+-                      goto out;
++                      goto out; /* FIXME: check for quirks */
+               }
+               mutex_unlock(&dev->mode_config.mutex);
+       }
+@@ -481,6 +472,8 @@
+               if (dev_priv->panel_fixed_mode) {
+                       dev_priv->panel_fixed_mode->type |=
+                               DRM_MODE_TYPE_PREFERRED;
++                      drm_mode_probed_add(connector,
++                                          dev_priv->panel_fixed_mode);
+                       goto out;
+               }
+       }
+@@ -499,7 +492,7 @@
+               if (dev_priv->panel_fixed_mode) {
+                       dev_priv->panel_fixed_mode->type |=
+                               DRM_MODE_TYPE_PREFERRED;
+-                      goto out;
++                      goto out; /* FIXME: check for quirks */
+               }
+       }
+@@ -507,6 +500,38 @@
+       if (!dev_priv->panel_fixed_mode)
+               goto failed;
++      /* FIXME: detect aopen & mac mini type stuff automatically? */
++      /*
++       * Blacklist machines with BIOSes that list an LVDS panel without
++       * actually having one.
++       */
++      if (IS_I945GM(dev)) {
++              /* aopen mini pc */
++              if (dev->pdev->subsystem_vendor == 0xa0a0)
++                      goto failed;
++
++              if ((dev->pdev->subsystem_vendor == 0x8086) &&
++                  (dev->pdev->subsystem_device == 0x7270)) {
++                      /* It's a Mac Mini or Macbook Pro.
++                       *
++                       * Apple hardware is out to get us.  The macbook pro
++                       * has a real LVDS panel, but the mac mini does not,
++                       * and they have the same device IDs.  We'll
++                       * distinguish by panel size, on the assumption
++                       * that Apple isn't about to make any machines with an
++                       * 800x600 display.
++                       */
++
++                      if (dev_priv->panel_fixed_mode != NULL &&
++                          dev_priv->panel_fixed_mode->hdisplay == 800 &&
++                          dev_priv->panel_fixed_mode->vdisplay == 600) {
++                              DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n");
++                              goto failed;
++                      }
++              }
++      }
++
++
+ out:
+       drm_sysfs_connector_add(connector);
+       return;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_sdvo.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_sdvo.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_sdvo.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_sdvo.c    2009-05-10 23:48:28.000000000 +0200
+@@ -40,59 +40,13 @@
+ struct intel_sdvo_priv {
+       struct intel_i2c_chan *i2c_bus;
+       int slaveaddr;
+-
+-      /* Register for the SDVO device: SDVOB or SDVOC */
+       int output_device;
+-      /* Active outputs controlled by this SDVO output */
+-      uint16_t controlled_output;
++      u16 active_outputs;
+-      /*
+-       * Capabilities of the SDVO device returned by
+-       * i830_sdvo_get_capabilities()
+-       */
+       struct intel_sdvo_caps caps;
+-
+-      /* Pixel clock limitations reported by the SDVO device, in kHz */
+       int pixel_clock_min, pixel_clock_max;
+-      /**
+-       * This is set if we're going to treat the device as TV-out.
+-       *
+-       * While we have these nice friendly flags for output types that ought
+-       * to decide this for us, the S-Video output on our HDMI+S-Video card
+-       * shows up as RGB1 (VGA).
+-       */
+-      bool is_tv;
+-
+-      /**
+-       * This is set if we treat the device as HDMI, instead of DVI.
+-       */
+-      bool is_hdmi;
+-
+-      /**
+-       * Returned SDTV resolutions allowed for the current format, if the
+-       * device reported it.
+-       */
+-      struct intel_sdvo_sdtv_resolution_reply sdtv_resolutions;
+-
+-      /**
+-       * Current selected TV format.
+-       *
+-       * This is stored in the same structure that's passed to the device, for
+-       * convenience.
+-       */
+-      struct intel_sdvo_tv_format tv_format;
+-
+-      /*
+-       * supported encoding mode, used to determine whether HDMI is
+-       * supported
+-       */
+-      struct intel_sdvo_encode encode;
+-
+-      /* DDC bus used by this SDVO output */
+-      uint8_t ddc_bus;
+-
+       int save_sdvo_mult;
+       u16 save_active_outputs;
+       struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
+@@ -193,9 +147,9 @@
+ #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
+ /** Mapping of command numbers to names, for debug output */
+-static const struct _sdvo_cmd_name {
+-      u8 cmd;
+-      char *name;
++const static struct _sdvo_cmd_name {
++    u8 cmd;
++    char *name;
+ } sdvo_cmd_names[] = {
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
+@@ -232,35 +186,8 @@
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE),
++    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT),
+     SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
+-    /* HDMI op code */
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA),
+-    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
+ };
+ #define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC")
+@@ -579,50 +506,6 @@
+                                    SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd);
+ }
+-static bool
+-intel_sdvo_create_preferred_input_timing(struct intel_output *output,
+-                                       uint16_t clock,
+-                                       uint16_t width,
+-                                       uint16_t height)
+-{
+-      struct intel_sdvo_preferred_input_timing_args args;
+-      uint8_t status;
+-
+-      args.clock = clock;
+-      args.width = width;
+-      args.height = height;
+-      intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
+-                           &args, sizeof(args));
+-      status = intel_sdvo_read_response(output, NULL, 0);
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return false;
+-
+-      return true;
+-}
+-
+-static bool intel_sdvo_get_preferred_input_timing(struct intel_output *output,
+-                                                struct intel_sdvo_dtd *dtd)
+-{
+-      bool status;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1,
+-                           NULL, 0);
+-
+-      status = intel_sdvo_read_response(output, &dtd->part1,
+-                                        sizeof(dtd->part1));
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return false;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2,
+-                           NULL, 0);
+-
+-      status = intel_sdvo_read_response(output, &dtd->part2,
+-                                        sizeof(dtd->part2));
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return false;
+-
+-      return false;
+-}
+ static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output)
+ {
+@@ -653,12 +536,36 @@
+       return true;
+ }
+-static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
+-                                       struct drm_display_mode *mode)
++static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
++                                struct drm_display_mode *mode,
++                                struct drm_display_mode *adjusted_mode)
+ {
+-      uint16_t width, height;
+-      uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len;
+-      uint16_t h_sync_offset, v_sync_offset;
++      /* Make the CRTC code factor in the SDVO pixel multiplier.  The SDVO
++       * device will be told of the multiplier during mode_set.
++       */
++      adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
++      return true;
++}
++
++static void intel_sdvo_mode_set(struct drm_encoder *encoder,
++                              struct drm_display_mode *mode,
++                              struct drm_display_mode *adjusted_mode)
++{
++      struct drm_device *dev = encoder->dev;
++      struct drm_i915_private *dev_priv = dev->dev_private;
++      struct drm_crtc *crtc = encoder->crtc;
++      struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
++      struct intel_output *intel_output = enc_to_intel_output(encoder);
++      struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
++      u16 width, height;
++      u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len;
++      u16 h_sync_offset, v_sync_offset;
++      u32 sdvox;
++      struct intel_sdvo_dtd output_dtd;
++      int sdvo_pixel_multiply;
++
++      if (!mode)
++              return;
+       width = mode->crtc_hdisplay;
+       height = mode->crtc_vdisplay;
+@@ -673,423 +580,93 @@
+       h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
+       v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
+-      dtd->part1.clock = mode->clock / 10;
+-      dtd->part1.h_active = width & 0xff;
+-      dtd->part1.h_blank = h_blank_len & 0xff;
+-      dtd->part1.h_high = (((width >> 8) & 0xf) << 4) |
++      output_dtd.part1.clock = mode->clock / 10;
++      output_dtd.part1.h_active = width & 0xff;
++      output_dtd.part1.h_blank = h_blank_len & 0xff;
++      output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) |
+               ((h_blank_len >> 8) & 0xf);
+-      dtd->part1.v_active = height & 0xff;
+-      dtd->part1.v_blank = v_blank_len & 0xff;
+-      dtd->part1.v_high = (((height >> 8) & 0xf) << 4) |
++      output_dtd.part1.v_active = height & 0xff;
++      output_dtd.part1.v_blank = v_blank_len & 0xff;
++      output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) |
+               ((v_blank_len >> 8) & 0xf);
+-      dtd->part2.h_sync_off = h_sync_offset;
+-      dtd->part2.h_sync_width = h_sync_len & 0xff;
+-      dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
++      output_dtd.part2.h_sync_off = h_sync_offset;
++      output_dtd.part2.h_sync_width = h_sync_len & 0xff;
++      output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
+               (v_sync_len & 0xf);
+-      dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) |
++      output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) |
+               ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) |
+               ((v_sync_len & 0x30) >> 4);
+-      dtd->part2.dtd_flags = 0x18;
++      output_dtd.part2.dtd_flags = 0x18;
+       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+-              dtd->part2.dtd_flags |= 0x2;
++              output_dtd.part2.dtd_flags |= 0x2;
+       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+-              dtd->part2.dtd_flags |= 0x4;
+-
+-      dtd->part2.sdvo_flags = 0;
+-      dtd->part2.v_sync_off_high = v_sync_offset & 0xc0;
+-      dtd->part2.reserved = 0;
+-}
+-
+-static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode,
+-                                       struct intel_sdvo_dtd *dtd)
+-{
+-      uint16_t width, height;
+-      uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len;
+-      uint16_t h_sync_offset, v_sync_offset;
+-
+-      width = mode->crtc_hdisplay;
+-      height = mode->crtc_vdisplay;
+-
+-      /* do some mode translations */
+-      h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
+-      h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+-
+-      v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
+-      v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+-
+-      h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
+-      v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
+-
+-      mode->hdisplay = dtd->part1.h_active;
+-      mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8;
+-      mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off;
+-      mode->hsync_start += (dtd->part2.sync_off_width_high & 0xa0) << 2;
+-      mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width;
+-      mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4;
+-      mode->htotal = mode->hdisplay + dtd->part1.h_blank;
+-      mode->htotal += (dtd->part1.h_high & 0xf) << 8;
+-
+-      mode->vdisplay = dtd->part1.v_active;
+-      mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8;
+-      mode->vsync_start = mode->vdisplay;
+-      mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf;
+-      mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0a) << 2;
+-      mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0;
+-      mode->vsync_end = mode->vsync_start +
+-              (dtd->part2.v_sync_off_width & 0xf);
+-      mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4;
+-      mode->vtotal = mode->vdisplay + dtd->part1.v_blank;
+-      mode->vtotal += (dtd->part1.v_high & 0xf) << 8;
+-
+-      mode->clock = dtd->part1.clock * 10;
+-
+-      mode->flags &= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+-      if (dtd->part2.dtd_flags & 0x2)
+-              mode->flags |= DRM_MODE_FLAG_PHSYNC;
+-      if (dtd->part2.dtd_flags & 0x4)
+-              mode->flags |= DRM_MODE_FLAG_PVSYNC;
+-}
+-
+-static bool intel_sdvo_get_supp_encode(struct intel_output *output,
+-                                     struct intel_sdvo_encode *encode)
+-{
+-      uint8_t status;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_SUPP_ENCODE, NULL, 0);
+-      status = intel_sdvo_read_response(output, encode, sizeof(*encode));
+-      if (status != SDVO_CMD_STATUS_SUCCESS) { /* non-support means DVI */
+-              memset(encode, 0, sizeof(*encode));
+-              return false;
+-      }
+-
+-      return true;
+-}
+-
+-static bool intel_sdvo_set_encode(struct intel_output *output, uint8_t mode)
+-{
+-      uint8_t status;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_SET_ENCODE, &mode, 1);
+-      status = intel_sdvo_read_response(output, NULL, 0);
+-
+-      return (status == SDVO_CMD_STATUS_SUCCESS);
+-}
+-
+-static bool intel_sdvo_set_colorimetry(struct intel_output *output,
+-                                     uint8_t mode)
+-{
+-      uint8_t status;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
+-      status = intel_sdvo_read_response(output, NULL, 0);
+-
+-      return (status == SDVO_CMD_STATUS_SUCCESS);
+-}
+-
+-#if 0
+-static void intel_sdvo_dump_hdmi_buf(struct intel_output *output)
+-{
+-      int i, j;
+-      uint8_t set_buf_index[2];
+-      uint8_t av_split;
+-      uint8_t buf_size;
+-      uint8_t buf[48];
+-      uint8_t *pos;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_AV_SPLIT, NULL, 0);
+-      intel_sdvo_read_response(output, &av_split, 1);
+-
+-      for (i = 0; i <= av_split; i++) {
+-              set_buf_index[0] = i; set_buf_index[1] = 0;
+-              intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX,
+-                                   set_buf_index, 2);
+-              intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_INFO, NULL, 0);
+-              intel_sdvo_read_response(output, &buf_size, 1);
+-
+-              pos = buf;
+-              for (j = 0; j <= buf_size; j += 8) {
+-                      intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_DATA,
+-                                           NULL, 0);
+-                      intel_sdvo_read_response(output, pos, 8);
+-                      pos += 8;
+-              }
+-      }
+-}
+-#endif
+-
+-static void intel_sdvo_set_hdmi_buf(struct intel_output *output, int index,
+-                              uint8_t *data, int8_t size, uint8_t tx_rate)
+-{
+-    uint8_t set_buf_index[2];
+-
+-    set_buf_index[0] = index;
+-    set_buf_index[1] = 0;
+-
+-    intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2);
+-
+-    for (; size > 0; size -= 8) {
+-      intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_DATA, data, 8);
+-      data += 8;
+-    }
+-
+-    intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1);
+-}
+-
+-static uint8_t intel_sdvo_calc_hbuf_csum(uint8_t *data, uint8_t size)
+-{
+-      uint8_t csum = 0;
+-      int i;
+-
+-      for (i = 0; i < size; i++)
+-              csum += data[i];
+-
+-      return 0x100 - csum;
+-}
+-
+-#define DIP_TYPE_AVI  0x82
+-#define DIP_VERSION_AVI       0x2
+-#define DIP_LEN_AVI   13
+-
+-struct dip_infoframe {
+-      uint8_t type;
+-      uint8_t version;
+-      uint8_t len;
+-      uint8_t checksum;
+-      union {
+-              struct {
+-                      /* Packet Byte #1 */
+-                      uint8_t S:2;
+-                      uint8_t B:2;
+-                      uint8_t A:1;
+-                      uint8_t Y:2;
+-                      uint8_t rsvd1:1;
+-                      /* Packet Byte #2 */
+-                      uint8_t R:4;
+-                      uint8_t M:2;
+-                      uint8_t C:2;
+-                      /* Packet Byte #3 */
+-                      uint8_t SC:2;
+-                      uint8_t Q:2;
+-                      uint8_t EC:3;
+-                      uint8_t ITC:1;
+-                      /* Packet Byte #4 */
+-                      uint8_t VIC:7;
+-                      uint8_t rsvd2:1;
+-                      /* Packet Byte #5 */
+-                      uint8_t PR:4;
+-                      uint8_t rsvd3:4;
+-                      /* Packet Byte #6~13 */
+-                      uint16_t top_bar_end;
+-                      uint16_t bottom_bar_start;
+-                      uint16_t left_bar_end;
+-                      uint16_t right_bar_start;
+-              } avi;
+-              struct {
+-                      /* Packet Byte #1 */
+-                      uint8_t channel_count:3;
+-                      uint8_t rsvd1:1;
+-                      uint8_t coding_type:4;
+-                      /* Packet Byte #2 */
+-                      uint8_t sample_size:2; /* SS0, SS1 */
+-                      uint8_t sample_frequency:3;
+-                      uint8_t rsvd2:3;
+-                      /* Packet Byte #3 */
+-                      uint8_t coding_type_private:5;
+-                      uint8_t rsvd3:3;
+-                      /* Packet Byte #4 */
+-                      uint8_t channel_allocation;
+-                      /* Packet Byte #5 */
+-                      uint8_t rsvd4:3;
+-                      uint8_t level_shift:4;
+-                      uint8_t downmix_inhibit:1;
+-              } audio;
+-              uint8_t payload[28];
+-      } __attribute__ ((packed)) u;
+-} __attribute__((packed));
+-
+-static void intel_sdvo_set_avi_infoframe(struct intel_output *output,
+-                                       struct drm_display_mode * mode)
+-{
+-      struct dip_infoframe avi_if = {
+-              .type = DIP_TYPE_AVI,
+-              .version = DIP_VERSION_AVI,
+-              .len = DIP_LEN_AVI,
+-      };
+-
+-      avi_if.checksum = intel_sdvo_calc_hbuf_csum((uint8_t *)&avi_if,
+-                                                  4 + avi_if.len);
+-      intel_sdvo_set_hdmi_buf(output, 1, (uint8_t *)&avi_if, 4 + avi_if.len,
+-                              SDVO_HBUF_TX_VSYNC);
+-}
+-
+-static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
+-                                struct drm_display_mode *mode,
+-                                struct drm_display_mode *adjusted_mode)
+-{
+-      struct intel_output *output = enc_to_intel_output(encoder);
+-      struct intel_sdvo_priv *dev_priv = output->dev_priv;
+-
+-      if (!dev_priv->is_tv) {
+-              /* Make the CRTC code factor in the SDVO pixel multiplier.  The
+-               * SDVO device will be told of the multiplier during mode_set.
+-               */
+-              adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
+-      } else {
+-              struct intel_sdvo_dtd output_dtd;
+-              bool success;
+-
+-              /* We need to construct preferred input timings based on our
+-               * output timings.  To do that, we have to set the output
+-               * timings, even though this isn't really the right place in
+-               * the sequence to do it. Oh well.
+-               */
+-
+-
+-              /* Set output timings */
+-              intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
+-              intel_sdvo_set_target_output(output,
+-                                           dev_priv->controlled_output);
+-              intel_sdvo_set_output_timing(output, &output_dtd);
+-
+-              /* Set the input timing to the screen. Assume always input 0. */
+-              intel_sdvo_set_target_input(output, true, false);
+-
+-
+-              success = intel_sdvo_create_preferred_input_timing(output,
+-                                                                 mode->clock / 10,
+-                                                                 mode->hdisplay,
+-                                                                 mode->vdisplay);
+-              if (success) {
+-                      struct intel_sdvo_dtd input_dtd;
+-
+-                      intel_sdvo_get_preferred_input_timing(output,
+-                                                           &input_dtd);
+-                      intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+-
+-              } else {
+-                      return false;
+-              }
+-      }
+-      return true;
+-}
+-
+-static void intel_sdvo_mode_set(struct drm_encoder *encoder,
+-                              struct drm_display_mode *mode,
+-                              struct drm_display_mode *adjusted_mode)
+-{
+-      struct drm_device *dev = encoder->dev;
+-      struct drm_i915_private *dev_priv = dev->dev_private;
+-      struct drm_crtc *crtc = encoder->crtc;
+-      struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+-      struct intel_output *output = enc_to_intel_output(encoder);
+-      struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+-      u32 sdvox = 0;
+-      int sdvo_pixel_multiply;
+-      struct intel_sdvo_in_out_map in_out;
+-      struct intel_sdvo_dtd input_dtd;
+-      u8 status;
+-
+-      if (!mode)
+-              return;
+-
+-      /* First, set the input mapping for the first input to our controlled
+-       * output. This is only correct if we're a single-input device, in
+-       * which case the first input is the output from the appropriate SDVO
+-       * channel on the motherboard.  In a two-input device, the first input
+-       * will be SDVOB and the second SDVOC.
+-       */
+-      in_out.in0 = sdvo_priv->controlled_output;
+-      in_out.in1 = 0;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP,
+-                           &in_out, sizeof(in_out));
+-      status = intel_sdvo_read_response(output, NULL, 0);
+-
+-      if (sdvo_priv->is_hdmi) {
+-              intel_sdvo_set_avi_infoframe(output, mode);
+-              sdvox |= SDVO_AUDIO_ENABLE;
+-      }
+-
+-      intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
++              output_dtd.part2.dtd_flags |= 0x4;
+-      /* If it's a TV, we already set the output timing in mode_fixup.
+-       * Otherwise, the output timing is equal to the input timing.
+-       */
+-      if (!sdvo_priv->is_tv) {
+-              /* Set the output timing to the screen */
+-              intel_sdvo_set_target_output(output,
+-                                           sdvo_priv->controlled_output);
+-              intel_sdvo_set_output_timing(output, &input_dtd);
+-      }
++      output_dtd.part2.sdvo_flags = 0;
++      output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0;
++      output_dtd.part2.reserved = 0;
++
++      /* Set the output timing to the screen */
++      intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs);
++      intel_sdvo_set_output_timing(intel_output, &output_dtd);
+       /* Set the input timing to the screen. Assume always input 0. */
+-      intel_sdvo_set_target_input(output, true, false);
++      intel_sdvo_set_target_input(intel_output, true, false);
+-      /* We would like to use intel_sdvo_create_preferred_input_timing() to
++      /* We would like to use i830_sdvo_create_preferred_input_timing() to
+        * provide the device with a timing it can support, if it supports that
+        * feature.  However, presumably we would need to adjust the CRTC to
+        * output the preferred timing, and we don't support that currently.
+        */
+-#if 0
+-      success = intel_sdvo_create_preferred_input_timing(output, clock,
+-                                                         width, height);
+-      if (success) {
+-              struct intel_sdvo_dtd *input_dtd;
+-
+-              intel_sdvo_get_preferred_input_timing(output, &input_dtd);
+-              intel_sdvo_set_input_timing(output, &input_dtd);
+-      }
+-#else
+-      intel_sdvo_set_input_timing(output, &input_dtd);
+-#endif
++      intel_sdvo_set_input_timing(intel_output, &output_dtd);
+       switch (intel_sdvo_get_pixel_multiplier(mode)) {
+       case 1:
+-              intel_sdvo_set_clock_rate_mult(output,
++              intel_sdvo_set_clock_rate_mult(intel_output,
+                                              SDVO_CLOCK_RATE_MULT_1X);
+               break;
+       case 2:
+-              intel_sdvo_set_clock_rate_mult(output,
++              intel_sdvo_set_clock_rate_mult(intel_output,
+                                              SDVO_CLOCK_RATE_MULT_2X);
+               break;
+       case 4:
+-              intel_sdvo_set_clock_rate_mult(output,
++              intel_sdvo_set_clock_rate_mult(intel_output,
+                                              SDVO_CLOCK_RATE_MULT_4X);
+               break;
+       }
+       /* Set the SDVO control regs. */
+-      if (IS_I965G(dev)) {
+-              sdvox |= SDVO_BORDER_ENABLE |
+-                      SDVO_VSYNC_ACTIVE_HIGH |
+-                      SDVO_HSYNC_ACTIVE_HIGH;
+-      } else {
+-              sdvox |= I915_READ(sdvo_priv->output_device);
+-              switch (sdvo_priv->output_device) {
+-              case SDVOB:
+-                      sdvox &= SDVOB_PRESERVE_MASK;
+-                      break;
+-              case SDVOC:
+-                      sdvox &= SDVOC_PRESERVE_MASK;
+-                      break;
+-              }
+-              sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
+-      }
++        if (0/*IS_I965GM(dev)*/) {
++                sdvox = SDVO_BORDER_ENABLE;
++        } else {
++                sdvox = I915_READ(sdvo_priv->output_device);
++                switch (sdvo_priv->output_device) {
++                case SDVOB:
++                        sdvox &= SDVOB_PRESERVE_MASK;
++                        break;
++                case SDVOC:
++                        sdvox &= SDVOC_PRESERVE_MASK;
++                        break;
++                }
++                sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
++        }
+       if (intel_crtc->pipe == 1)
+               sdvox |= SDVO_PIPE_B_SELECT;
+       sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode);
+       if (IS_I965G(dev)) {
+-              /* done in crtc_mode_set as the dpll_md reg must be written early */
+-      } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
+-              /* done in crtc_mode_set as it lives inside the dpll register */
++              /* done in crtc_mode_set as the dpll_md reg must be written
++                 early */
++      } else if (IS_I945G(dev) || IS_I945GM(dev)) {
++              /* done in crtc_mode_set as it lives inside the
++                 dpll register */
+       } else {
+               sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+       }
+-      intel_sdvo_write_sdvox(output, sdvox);
++      intel_sdvo_write_sdvox(intel_output, sdvox);
+ }
+ static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+@@ -1137,7 +714,7 @@
+               if (0)
+                       intel_sdvo_set_encoder_power_state(intel_output, mode);
+-              intel_sdvo_set_active_outputs(intel_output, sdvo_priv->controlled_output);
++              intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs);
+       }
+       return;
+ }
+@@ -1175,9 +752,6 @@
+                                                    &sdvo_priv->save_output_dtd[o]);
+               }
+       }
+-      if (sdvo_priv->is_tv) {
+-              /* XXX: Save TV format/enhancements. */
+-      }
+       sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device);
+ }
+@@ -1185,6 +759,7 @@
+ static void intel_sdvo_restore(struct drm_connector *connector)
+ {
+       struct drm_device *dev = connector->dev;
++      struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_output *intel_output = to_intel_output(connector);
+       struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+       int o;
+@@ -1215,11 +790,7 @@
+       intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult);
+-      if (sdvo_priv->is_tv) {
+-              /* XXX: Restore TV format/enhancements. */
+-      }
+-
+-      intel_sdvo_write_sdvox(intel_output, sdvo_priv->save_SDVOX);
++      I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX);
+       if (sdvo_priv->save_SDVOX & SDVO_ENABLE)
+       {
+@@ -1345,173 +916,20 @@
+       status = intel_sdvo_read_response(intel_output, &response, 2);
+       DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+-
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return connector_status_unknown;
+-
+       if ((response[0] != 0) || (response[1] != 0))
+               return connector_status_connected;
+       else
+               return connector_status_disconnected;
+ }
+-static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
++static int intel_sdvo_get_modes(struct drm_connector *connector)
+ {
+       struct intel_output *intel_output = to_intel_output(connector);
+-      struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+       /* set the bus switch and get the modes */
+-      intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
++      intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2);
+       intel_ddc_get_modes(intel_output);
+-#if 0
+-      struct drm_device *dev = encoder->dev;
+-      struct drm_i915_private *dev_priv = dev->dev_private;
+-      /* Mac mini hack.  On this device, I get DDC through the analog, which
+-       * load-detects as disconnected.  I fail to DDC through the SDVO DDC,
+-       * but it does load-detect as connected.  So, just steal the DDC bits
+-       * from analog when we fail at finding it the right way.
+-       */
+-      crt = xf86_config->output[0];
+-      intel_output = crt->driver_private;
+-      if (intel_output->type == I830_OUTPUT_ANALOG &&
+-          crt->funcs->detect(crt) == XF86OutputStatusDisconnected) {
+-              I830I2CInit(pScrn, &intel_output->pDDCBus, GPIOA, "CRTDDC_A");
+-              edid_mon = xf86OutputGetEDID(crt, intel_output->pDDCBus);
+-              xf86DestroyI2CBusRec(intel_output->pDDCBus, true, true);
+-      }
+-      if (edid_mon) {
+-              xf86OutputSetEDID(output, edid_mon);
+-              modes = xf86OutputGetEDIDModes(output);
+-      }
+-#endif
+-}
+-
+-/**
+- * This function checks the current TV format, and chooses a default if
+- * it hasn't been set.
+- */
+-static void
+-intel_sdvo_check_tv_format(struct intel_output *output)
+-{
+-      struct intel_sdvo_priv *dev_priv = output->dev_priv;
+-      struct intel_sdvo_tv_format format, unset;
+-      uint8_t status;
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_TV_FORMAT, NULL, 0);
+-      status = intel_sdvo_read_response(output, &format, sizeof(format));
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return;
+-
+-      memset(&unset, 0, sizeof(unset));
+-      if (memcmp(&format, &unset, sizeof(format))) {
+-              DRM_DEBUG("%s: Choosing default TV format of NTSC-M\n",
+-                        SDVO_NAME(dev_priv));
+-
+-              format.ntsc_m = true;
+-              intel_sdvo_write_cmd(output, SDVO_CMD_SET_TV_FORMAT, NULL, 0);
+-              status = intel_sdvo_read_response(output, NULL, 0);
+-      }
+-}
+-
+-/*
+- * Set of SDVO TV modes.
+- * Note!  This is in reply order (see loop in get_tv_modes).
+- * XXX: all 60Hz refresh?
+- */
+-struct drm_display_mode sdvo_tv_modes[] = {
+-      { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815680, 321, 384, 416,
+-                 200, 0, 232, 201, 233, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814080, 321, 384, 416,
+-                 240, 0, 272, 241, 273, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910080, 401, 464, 496,
+-                 300, 0, 332, 301, 333, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913280, 641, 704, 736,
+-                 350, 0, 382, 351, 383, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736,
+-                 400, 0, 432, 401, 433, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736,
+-                 400, 0, 432, 401, 433, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624000, 705, 768, 800,
+-                 480, 0, 512, 481, 513, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232000, 705, 768, 800,
+-                 576, 0, 608, 577, 609, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751680, 721, 784, 816,
+-                 350, 0, 382, 351, 383, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199680, 721, 784, 816,
+-                 400, 0, 432, 401, 433, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116480, 721, 784, 816,
+-                 480, 0, 512, 481, 513, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054080, 721, 784, 816,
+-                 540, 0, 572, 541, 573, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816640, 721, 784, 816,
+-                 576, 0, 608, 577, 609, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570560, 769, 832, 864,
+-                 576, 0, 608, 577, 609, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030080, 801, 864, 896,
+-                 600, 0, 632, 601, 633, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581760, 833, 896, 928,
+-                 624, 0, 656, 625, 657, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707040, 921, 984, 1016,
+-                 766, 0, 798, 767, 799, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827200, 1025, 1088, 1120,
+-                 768, 0, 800, 769, 801, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-      { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265920, 1281, 1344, 1376,
+-                 1024, 0, 1056, 1025, 1057, 4196112, 0,
+-                 DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+-};
+-
+-static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
+-{
+-      struct intel_output *output = to_intel_output(connector);
+-      uint32_t reply = 0;
+-      uint8_t status;
+-      int i = 0;
+-
+-      intel_sdvo_check_tv_format(output);
+-
+-      /* Read the list of supported input resolutions for the selected TV
+-       * format.
+-       */
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT,
+-                           NULL, 0);
+-      status = intel_sdvo_read_response(output, &reply, 3);
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return;
+-
+-      for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++)
+-              if (reply & (1 << i))
+-                      drm_mode_probed_add(connector, &sdvo_tv_modes[i]);
+-}
+-
+-static int intel_sdvo_get_modes(struct drm_connector *connector)
+-{
+-      struct intel_output *output = to_intel_output(connector);
+-      struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+-
+-      if (sdvo_priv->is_tv)
+-              intel_sdvo_get_tv_modes(connector);
+-      else
+-              intel_sdvo_get_ddc_modes(connector);
+-
+       if (list_empty(&connector->probed_modes))
+               return 0;
+       return 1;
+@@ -1560,65 +978,6 @@
+ };
+-/**
+- * Choose the appropriate DDC bus for control bus switch command for this
+- * SDVO output based on the controlled output.
+- *
+- * DDC bus number assignment is in a priority order of RGB outputs, then TMDS
+- * outputs, then LVDS outputs.
+- */
+-static void
+-intel_sdvo_select_ddc_bus(struct intel_sdvo_priv *dev_priv)
+-{
+-      uint16_t mask = 0;
+-      unsigned int num_bits;
+-
+-      /* Make a mask of outputs less than or equal to our own priority in the
+-       * list.
+-       */
+-      switch (dev_priv->controlled_output) {
+-      case SDVO_OUTPUT_LVDS1:
+-              mask |= SDVO_OUTPUT_LVDS1;
+-      case SDVO_OUTPUT_LVDS0:
+-              mask |= SDVO_OUTPUT_LVDS0;
+-      case SDVO_OUTPUT_TMDS1:
+-              mask |= SDVO_OUTPUT_TMDS1;
+-      case SDVO_OUTPUT_TMDS0:
+-              mask |= SDVO_OUTPUT_TMDS0;
+-      case SDVO_OUTPUT_RGB1:
+-              mask |= SDVO_OUTPUT_RGB1;
+-      case SDVO_OUTPUT_RGB0:
+-              mask |= SDVO_OUTPUT_RGB0;
+-              break;
+-      }
+-
+-      /* Count bits to find what number we are in the priority list. */
+-      mask &= dev_priv->caps.output_flags;
+-      num_bits = hweight16(mask);
+-      if (num_bits > 3) {
+-              /* if more than 3 outputs, default to DDC bus 3 for now */
+-              num_bits = 3;
+-      }
+-
+-      /* Corresponds to SDVO_CONTROL_BUS_DDCx */
+-      dev_priv->ddc_bus = 1 << num_bits;
+-}
+-
+-static bool
+-intel_sdvo_get_digital_encoding_mode(struct intel_output *output)
+-{
+-      struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+-      uint8_t status;
+-
+-      intel_sdvo_set_target_output(output, sdvo_priv->controlled_output);
+-
+-      intel_sdvo_write_cmd(output, SDVO_CMD_GET_ENCODE, NULL, 0);
+-      status = intel_sdvo_read_response(output, &sdvo_priv->is_hdmi, 1);
+-      if (status != SDVO_CMD_STATUS_SUCCESS)
+-              return false;
+-      return true;
+-}
+-
+ bool intel_sdvo_init(struct drm_device *dev, int output_device)
+ {
+       struct drm_connector *connector;
+@@ -1681,76 +1040,45 @@
+       intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
+-      if (sdvo_priv->caps.output_flags &
+-          (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+-              if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+-                      sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
+-              else
+-                      sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
+-
+-              connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+-              encoder_type = DRM_MODE_ENCODER_TMDS;
+-              connector_type = DRM_MODE_CONNECTOR_DVID;
++      memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs));
+-              if (intel_sdvo_get_supp_encode(intel_output,
+-                                             &sdvo_priv->encode) &&
+-                  intel_sdvo_get_digital_encoding_mode(intel_output) &&
+-                  sdvo_priv->is_hdmi) {
+-                      /* enable hdmi encoding mode if supported */
+-                      intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
+-                      intel_sdvo_set_colorimetry(intel_output,
+-                                                 SDVO_COLORIMETRY_RGB256);
+-                      connector_type = DRM_MODE_CONNECTOR_HDMIA;
+-              }
+-      }
+-      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
++      /* TODO, CVBS, SVID, YPRPB & SCART outputs. */
++      if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
+       {
+-              sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
+-              connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+-              encoder_type = DRM_MODE_ENCODER_TVDAC;
+-              connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+-              sdvo_priv->is_tv = true;
+-              intel_output->needs_tv_clock = true;
+-      }
+-      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
+-      {
+-              sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
++              sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0;
+               connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+               encoder_type = DRM_MODE_ENCODER_DAC;
+               connector_type = DRM_MODE_CONNECTOR_VGA;
+       }
+       else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
+       {
+-              sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
++              sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1;
+               connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+               encoder_type = DRM_MODE_ENCODER_DAC;
+               connector_type = DRM_MODE_CONNECTOR_VGA;
+       }
+-      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
++      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+       {
+-              sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
++              sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0;
+               connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+-              encoder_type = DRM_MODE_ENCODER_LVDS;
+-              connector_type = DRM_MODE_CONNECTOR_LVDS;
++              encoder_type = DRM_MODE_ENCODER_TMDS;
++              connector_type = DRM_MODE_CONNECTOR_DVID;
+       }
+-      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
++      else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1)
+       {
+-              sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
++              sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1;
+               connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+-              encoder_type = DRM_MODE_ENCODER_LVDS;
+-              connector_type = DRM_MODE_CONNECTOR_LVDS;
++              encoder_type = DRM_MODE_ENCODER_TMDS;
++              connector_type = DRM_MODE_CONNECTOR_DVID;
+       }
+       else
+       {
+               unsigned char bytes[2];
+-              sdvo_priv->controlled_output = 0;
+               memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
+-              DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n",
++              DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n",
+                         SDVO_NAME(sdvo_priv),
+                         bytes[0], bytes[1]);
+-              encoder_type = DRM_MODE_ENCODER_NONE;
+-              connector_type = DRM_MODE_CONNECTOR_Unknown;
+               goto err_i2c;
+       }
+@@ -1761,8 +1089,6 @@
+       drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+       drm_sysfs_connector_add(connector);
+-      intel_sdvo_select_ddc_bus(sdvo_priv);
+-
+       /* Set the input timing to the screen. Assume always input 0. */
+       intel_sdvo_set_target_input(intel_output, true, false);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_sdvo_regs.h linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_sdvo_regs.h
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_sdvo_regs.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_sdvo_regs.h       2009-05-10 23:48:28.000000000 +0200
+@@ -173,9 +173,6 @@
+  * Returns two struct intel_sdvo_output_flags structures.
+  */
+ #define SDVO_CMD_GET_IN_OUT_MAP                               0x06
+-struct intel_sdvo_in_out_map {
+-    u16 in0, in1;
+-};
+ /**
+  * Sets the current mapping of SDVO inputs to outputs on the device.
+@@ -209,8 +206,7 @@
+ struct intel_sdvo_get_interrupt_event_source_response {
+     u16 interrupt_status;
+     unsigned int ambient_light_interrupt:1;
+-    unsigned int hdmi_audio_encrypt_change:1;
+-    unsigned int pad:6;
++    unsigned int pad:7;
+ } __attribute__((packed));
+ /**
+@@ -309,411 +305,23 @@
+ # define SDVO_CLOCK_RATE_MULT_4X                              (1 << 3)
+ #define SDVO_CMD_GET_SUPPORTED_TV_FORMATS             0x27
+-/** 5 bytes of bit flags for TV formats shared by all TV format functions */
+-struct intel_sdvo_tv_format {
+-    unsigned int ntsc_m:1;
+-    unsigned int ntsc_j:1;
+-    unsigned int ntsc_443:1;
+-    unsigned int pal_b:1;
+-    unsigned int pal_d:1;
+-    unsigned int pal_g:1;
+-    unsigned int pal_h:1;
+-    unsigned int pal_i:1;
+-
+-    unsigned int pal_m:1;
+-    unsigned int pal_n:1;
+-    unsigned int pal_nc:1;
+-    unsigned int pal_60:1;
+-    unsigned int secam_b:1;
+-    unsigned int secam_d:1;
+-    unsigned int secam_g:1;
+-    unsigned int secam_k:1;
+-
+-    unsigned int secam_k1:1;
+-    unsigned int secam_l:1;
+-    unsigned int secam_60:1;
+-    unsigned int hdtv_std_smpte_240m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_240m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_260m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_260m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_274m_1080i_50:1;
+-
+-    unsigned int hdtv_std_smpte_274m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_274m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_23:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_24:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_25:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_29:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_30:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_50:1;
+-
+-    unsigned int hdtv_std_smpte_274m_1080p_59:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_60:1;
+-    unsigned int hdtv_std_smpte_295m_1080i_50:1;
+-    unsigned int hdtv_std_smpte_295m_1080p_50:1;
+-    unsigned int hdtv_std_smpte_296m_720p_59:1;
+-    unsigned int hdtv_std_smpte_296m_720p_60:1;
+-    unsigned int hdtv_std_smpte_296m_720p_50:1;
+-    unsigned int hdtv_std_smpte_293m_480p_59:1;
+-
+-    unsigned int hdtv_std_smpte_170m_480i_59:1;
+-    unsigned int hdtv_std_iturbt601_576i_50:1;
+-    unsigned int hdtv_std_iturbt601_576p_50:1;
+-    unsigned int hdtv_std_eia_7702a_480i_60:1;
+-    unsigned int hdtv_std_eia_7702a_480p_60:1;
+-    unsigned int pad:3;
+-} __attribute__((packed));
+ #define SDVO_CMD_GET_TV_FORMAT                                0x28
+ #define SDVO_CMD_SET_TV_FORMAT                                0x29
+-/** Returns the resolutiosn that can be used with the given TV format */
+-#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT          0x83
+-struct intel_sdvo_sdtv_resolution_request {
+-    unsigned int ntsc_m:1;
+-    unsigned int ntsc_j:1;
+-    unsigned int ntsc_443:1;
+-    unsigned int pal_b:1;
+-    unsigned int pal_d:1;
+-    unsigned int pal_g:1;
+-    unsigned int pal_h:1;
+-    unsigned int pal_i:1;
+-
+-    unsigned int pal_m:1;
+-    unsigned int pal_n:1;
+-    unsigned int pal_nc:1;
+-    unsigned int pal_60:1;
+-    unsigned int secam_b:1;
+-    unsigned int secam_d:1;
+-    unsigned int secam_g:1;
+-    unsigned int secam_k:1;
+-
+-    unsigned int secam_k1:1;
+-    unsigned int secam_l:1;
+-    unsigned int secam_60:1;
+-    unsigned int pad:5;
+-} __attribute__((packed));
+-
+-struct intel_sdvo_sdtv_resolution_reply {
+-    unsigned int res_320x200:1;
+-    unsigned int res_320x240:1;
+-    unsigned int res_400x300:1;
+-    unsigned int res_640x350:1;
+-    unsigned int res_640x400:1;
+-    unsigned int res_640x480:1;
+-    unsigned int res_704x480:1;
+-    unsigned int res_704x576:1;
+-
+-    unsigned int res_720x350:1;
+-    unsigned int res_720x400:1;
+-    unsigned int res_720x480:1;
+-    unsigned int res_720x540:1;
+-    unsigned int res_720x576:1;
+-    unsigned int res_768x576:1;
+-    unsigned int res_800x600:1;
+-    unsigned int res_832x624:1;
+-
+-    unsigned int res_920x766:1;
+-    unsigned int res_1024x768:1;
+-    unsigned int res_1280x1024:1;
+-    unsigned int pad:5;
+-} __attribute__((packed));
+-
+-/* Get supported resolution with squire pixel aspect ratio that can be
+-   scaled for the requested HDTV format */
+-#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT           0x85
+-
+-struct intel_sdvo_hdtv_resolution_request {
+-    unsigned int hdtv_std_smpte_240m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_240m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_260m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_260m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_274m_1080i_50:1;
+-    unsigned int hdtv_std_smpte_274m_1080i_59:1;
+-    unsigned int hdtv_std_smpte_274m_1080i_60:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_23:1;
+-
+-    unsigned int hdtv_std_smpte_274m_1080p_24:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_25:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_29:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_30:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_50:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_59:1;
+-    unsigned int hdtv_std_smpte_274m_1080p_60:1;
+-    unsigned int hdtv_std_smpte_295m_1080i_50:1;
+-
+-    unsigned int hdtv_std_smpte_295m_1080p_50:1;
+-    unsigned int hdtv_std_smpte_296m_720p_59:1;
+-    unsigned int hdtv_std_smpte_296m_720p_60:1;
+-    unsigned int hdtv_std_smpte_296m_720p_50:1;
+-    unsigned int hdtv_std_smpte_293m_480p_59:1;
+-    unsigned int hdtv_std_smpte_170m_480i_59:1;
+-    unsigned int hdtv_std_iturbt601_576i_50:1;
+-    unsigned int hdtv_std_iturbt601_576p_50:1;
+-
+-    unsigned int hdtv_std_eia_7702a_480i_60:1;
+-    unsigned int hdtv_std_eia_7702a_480p_60:1;
+-    unsigned int pad:6;
+-} __attribute__((packed));
+-
+-struct intel_sdvo_hdtv_resolution_reply {
+-    unsigned int res_640x480:1;
+-    unsigned int res_800x600:1;
+-    unsigned int res_1024x768:1;
+-    unsigned int res_1280x960:1;
+-    unsigned int res_1400x1050:1;
+-    unsigned int res_1600x1200:1;
+-    unsigned int res_1920x1440:1;
+-    unsigned int res_2048x1536:1;
+-
+-    unsigned int res_2560x1920:1;
+-    unsigned int res_3200x2400:1;
+-    unsigned int res_3840x2880:1;
+-    unsigned int pad1:5;
+-
+-    unsigned int res_848x480:1;
+-    unsigned int res_1064x600:1;
+-    unsigned int res_1280x720:1;
+-    unsigned int res_1360x768:1;
+-    unsigned int res_1704x960:1;
+-    unsigned int res_1864x1050:1;
+-    unsigned int res_1920x1080:1;
+-    unsigned int res_2128x1200:1;
+-
+-    unsigned int res_2560x1400:1;
+-    unsigned int res_2728x1536:1;
+-    unsigned int res_3408x1920:1;
+-    unsigned int res_4264x2400:1;
+-    unsigned int res_5120x2880:1;
+-    unsigned int pad2:3;
+-
+-    unsigned int res_768x480:1;
+-    unsigned int res_960x600:1;
+-    unsigned int res_1152x720:1;
+-    unsigned int res_1124x768:1;
+-    unsigned int res_1536x960:1;
+-    unsigned int res_1680x1050:1;
+-    unsigned int res_1728x1080:1;
+-    unsigned int res_1920x1200:1;
+-
+-    unsigned int res_2304x1440:1;
+-    unsigned int res_2456x1536:1;
+-    unsigned int res_3072x1920:1;
+-    unsigned int res_3840x2400:1;
+-    unsigned int res_4608x2880:1;
+-    unsigned int pad3:3;
+-
+-    unsigned int res_1280x1024:1;
+-    unsigned int pad4:7;
+-
+-    unsigned int res_1280x768:1;
+-    unsigned int pad5:7;
+-} __attribute__((packed));
+-
+-/* Get supported power state returns info for encoder and monitor, rely on
+-   last SetTargetInput and SetTargetOutput calls */
+ #define SDVO_CMD_GET_SUPPORTED_POWER_STATES           0x2a
+-/* Get power state returns info for encoder and monitor, rely on last
+-   SetTargetInput and SetTargetOutput calls */
+-#define SDVO_CMD_GET_POWER_STATE                      0x2b
+ #define SDVO_CMD_GET_ENCODER_POWER_STATE              0x2b
+ #define SDVO_CMD_SET_ENCODER_POWER_STATE              0x2c
+ # define SDVO_ENCODER_STATE_ON                                        (1 << 0)
+ # define SDVO_ENCODER_STATE_STANDBY                           (1 << 1)
+ # define SDVO_ENCODER_STATE_SUSPEND                           (1 << 2)
+ # define SDVO_ENCODER_STATE_OFF                                       (1 << 3)
+-# define SDVO_MONITOR_STATE_ON                                        (1 << 4)
+-# define SDVO_MONITOR_STATE_STANDBY                           (1 << 5)
+-# define SDVO_MONITOR_STATE_SUSPEND                           (1 << 6)
+-# define SDVO_MONITOR_STATE_OFF                                       (1 << 7)
+-
+-#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING               0x2d
+-#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING           0x2e
+-#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING           0x2f
+-/**
+- * The panel power sequencing parameters are in units of milliseconds.
+- * The high fields are bits 8:9 of the 10-bit values.
+- */
+-struct sdvo_panel_power_sequencing {
+-    u8 t0;
+-    u8 t1;
+-    u8 t2;
+-    u8 t3;
+-    u8 t4;
+-
+-    unsigned int t0_high:2;
+-    unsigned int t1_high:2;
+-    unsigned int t2_high:2;
+-    unsigned int t3_high:2;
+-
+-    unsigned int t4_high:2;
+-    unsigned int pad:6;
+-} __attribute__((packed));
+-
+-#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL              0x30
+-struct sdvo_max_backlight_reply {
+-    u8 max_value;
+-    u8 default_value;
+-} __attribute__((packed));
+-
+-#define SDVO_CMD_GET_BACKLIGHT_LEVEL                  0x31
+-#define SDVO_CMD_SET_BACKLIGHT_LEVEL                  0x32
+-
+-#define SDVO_CMD_GET_AMBIENT_LIGHT                    0x33
+-struct sdvo_get_ambient_light_reply {
+-    u16 trip_low;
+-    u16 trip_high;
+-    u16 value;
+-} __attribute__((packed));
+-#define SDVO_CMD_SET_AMBIENT_LIGHT                    0x34
+-struct sdvo_set_ambient_light_reply {
+-    u16 trip_low;
+-    u16 trip_high;
+-    unsigned int enable:1;
+-    unsigned int pad:7;
+-} __attribute__((packed));
+-
+-/* Set display power state */
+-#define SDVO_CMD_SET_DISPLAY_POWER_STATE              0x7d
+-# define SDVO_DISPLAY_STATE_ON                                (1 << 0)
+-# define SDVO_DISPLAY_STATE_STANDBY                   (1 << 1)
+-# define SDVO_DISPLAY_STATE_SUSPEND                   (1 << 2)
+-# define SDVO_DISPLAY_STATE_OFF                               (1 << 3)
+-
+-#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS           0x84
+-struct intel_sdvo_enhancements_reply {
+-    unsigned int flicker_filter:1;
+-    unsigned int flicker_filter_adaptive:1;
+-    unsigned int flicker_filter_2d:1;
+-    unsigned int saturation:1;
+-    unsigned int hue:1;
+-    unsigned int brightness:1;
+-    unsigned int contrast:1;
+-    unsigned int overscan_h:1;
+-
+-    unsigned int overscan_v:1;
+-    unsigned int position_h:1;
+-    unsigned int position_v:1;
+-    unsigned int sharpness:1;
+-    unsigned int dot_crawl:1;
+-    unsigned int dither:1;
+-    unsigned int max_tv_chroma_filter:1;
+-    unsigned int max_tv_luma_filter:1;
+-} __attribute__((packed));
+-
+-/* Picture enhancement limits below are dependent on the current TV format,
+- * and thus need to be queried and set after it.
+- */
+-#define SDVO_CMD_GET_MAX_FLICKER_FITER                        0x4d
+-#define SDVO_CMD_GET_MAX_ADAPTIVE_FLICKER_FITER               0x7b
+-#define SDVO_CMD_GET_MAX_2D_FLICKER_FITER             0x52
+-#define SDVO_CMD_GET_MAX_SATURATION                   0x55
+-#define SDVO_CMD_GET_MAX_HUE                          0x58
+-#define SDVO_CMD_GET_MAX_BRIGHTNESS                   0x5b
+-#define SDVO_CMD_GET_MAX_CONTRAST                     0x5e
+-#define SDVO_CMD_GET_MAX_OVERSCAN_H                   0x61
+-#define SDVO_CMD_GET_MAX_OVERSCAN_V                   0x64
+-#define SDVO_CMD_GET_MAX_POSITION_H                   0x67
+-#define SDVO_CMD_GET_MAX_POSITION_V                   0x6a
+-#define SDVO_CMD_GET_MAX_SHARPNESS_V                  0x6d
+-#define SDVO_CMD_GET_MAX_TV_CHROMA                    0x74
+-#define SDVO_CMD_GET_MAX_TV_LUMA                      0x77
+-struct intel_sdvo_enhancement_limits_reply {
+-    u16 max_value;
+-    u16 default_value;
+-} __attribute__((packed));
+-#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION           0x7f
+-#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION           0x80
+-# define SDVO_LVDS_COLOR_DEPTH_18                     (0 << 0)
+-# define SDVO_LVDS_COLOR_DEPTH_24                     (1 << 0)
+-# define SDVO_LVDS_CONNECTOR_SPWG                     (0 << 2)
+-# define SDVO_LVDS_CONNECTOR_OPENLDI                  (1 << 2)
+-# define SDVO_LVDS_SINGLE_CHANNEL                     (0 << 4)
+-# define SDVO_LVDS_DUAL_CHANNEL                               (1 << 4)
+-
+-#define SDVO_CMD_GET_FLICKER_FILTER                   0x4e
+-#define SDVO_CMD_SET_FLICKER_FILTER                   0x4f
+-#define SDVO_CMD_GET_ADAPTIVE_FLICKER_FITER           0x50
+-#define SDVO_CMD_SET_ADAPTIVE_FLICKER_FITER           0x51
+-#define SDVO_CMD_GET_2D_FLICKER_FITER                 0x53
+-#define SDVO_CMD_SET_2D_FLICKER_FITER                 0x54
+-#define SDVO_CMD_GET_SATURATION                               0x56
+-#define SDVO_CMD_SET_SATURATION                               0x57
+-#define SDVO_CMD_GET_HUE                              0x59
+-#define SDVO_CMD_SET_HUE                              0x5a
+-#define SDVO_CMD_GET_BRIGHTNESS                               0x5c
+-#define SDVO_CMD_SET_BRIGHTNESS                               0x5d
+-#define SDVO_CMD_GET_CONTRAST                         0x5f
+-#define SDVO_CMD_SET_CONTRAST                         0x60
+-#define SDVO_CMD_GET_OVERSCAN_H                               0x62
+-#define SDVO_CMD_SET_OVERSCAN_H                               0x63
+-#define SDVO_CMD_GET_OVERSCAN_V                               0x65
+-#define SDVO_CMD_SET_OVERSCAN_V                               0x66
+-#define SDVO_CMD_GET_POSITION_H                               0x68
+-#define SDVO_CMD_SET_POSITION_H                               0x69
+-#define SDVO_CMD_GET_POSITION_V                               0x6b
+-#define SDVO_CMD_SET_POSITION_V                               0x6c
+-#define SDVO_CMD_GET_SHARPNESS                                0x6e
+-#define SDVO_CMD_SET_SHARPNESS                                0x6f
+-#define SDVO_CMD_GET_TV_CHROMA                                0x75
+-#define SDVO_CMD_SET_TV_CHROMA                                0x76
+-#define SDVO_CMD_GET_TV_LUMA                          0x78
+-#define SDVO_CMD_SET_TV_LUMA                          0x79
+-struct intel_sdvo_enhancements_arg {
+-    u16 value;
+-}__attribute__((packed));
+-
+-#define SDVO_CMD_GET_DOT_CRAWL                                0x70
+-#define SDVO_CMD_SET_DOT_CRAWL                                0x71
+-# define SDVO_DOT_CRAWL_ON                                    (1 << 0)
+-# define SDVO_DOT_CRAWL_DEFAULT_ON                            (1 << 1)
+-
+-#define SDVO_CMD_GET_DITHER                           0x72
+-#define SDVO_CMD_SET_DITHER                           0x73
+-# define SDVO_DITHER_ON                                               (1 << 0)
+-# define SDVO_DITHER_DEFAULT_ON                                       (1 << 1)
++#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT            0x93
+ #define SDVO_CMD_SET_CONTROL_BUS_SWITCH                       0x7a
+-# define SDVO_CONTROL_BUS_PROM                                (1 << 0)
+-# define SDVO_CONTROL_BUS_DDC1                                (1 << 1)
+-# define SDVO_CONTROL_BUS_DDC2                                (1 << 2)
+-# define SDVO_CONTROL_BUS_DDC3                                (1 << 3)
+-
+-/* HDMI op codes */
+-#define SDVO_CMD_GET_SUPP_ENCODE      0x9d
+-#define SDVO_CMD_GET_ENCODE           0x9e
+-#define SDVO_CMD_SET_ENCODE           0x9f
+-  #define SDVO_ENCODE_DVI     0x0
+-  #define SDVO_ENCODE_HDMI    0x1
+-#define SDVO_CMD_SET_PIXEL_REPLI      0x8b
+-#define SDVO_CMD_GET_PIXEL_REPLI      0x8c
+-#define SDVO_CMD_GET_COLORIMETRY_CAP  0x8d
+-#define SDVO_CMD_SET_COLORIMETRY      0x8e
+-  #define SDVO_COLORIMETRY_RGB256   0x0
+-  #define SDVO_COLORIMETRY_RGB220   0x1
+-  #define SDVO_COLORIMETRY_YCrCb422 0x3
+-  #define SDVO_COLORIMETRY_YCrCb444 0x4
+-#define SDVO_CMD_GET_COLORIMETRY      0x8f
+-#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90
+-#define SDVO_CMD_SET_AUDIO_STAT               0x91
+-#define SDVO_CMD_GET_AUDIO_STAT               0x92
+-#define SDVO_CMD_SET_HBUF_INDEX               0x93
+-#define SDVO_CMD_GET_HBUF_INDEX               0x94
+-#define SDVO_CMD_GET_HBUF_INFO                0x95
+-#define SDVO_CMD_SET_HBUF_AV_SPLIT    0x96
+-#define SDVO_CMD_GET_HBUF_AV_SPLIT    0x97
+-#define SDVO_CMD_SET_HBUF_DATA                0x98
+-#define SDVO_CMD_GET_HBUF_DATA                0x99
+-#define SDVO_CMD_SET_HBUF_TXRATE      0x9a
+-#define SDVO_CMD_GET_HBUF_TXRATE      0x9b
+-  #define SDVO_HBUF_TX_DISABLED       (0 << 6)
+-  #define SDVO_HBUF_TX_ONCE   (2 << 6)
+-  #define SDVO_HBUF_TX_VSYNC  (3 << 6)
+-#define SDVO_CMD_GET_AUDIO_TX_INFO    0x9c
+-
+-struct intel_sdvo_encode{
+-    u8 dvi_rev;
+-    u8 hdmi_rev;
+-} __attribute__ ((packed));
++# define SDVO_CONTROL_BUS_PROM                                0x0
++# define SDVO_CONTROL_BUS_DDC1                                0x1
++# define SDVO_CONTROL_BUS_DDC2                                0x2
++# define SDVO_CONTROL_BUS_DDC3                                0x3
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_tv.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_tv.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/i915/intel_tv.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/i915/intel_tv.c      2009-05-10 23:48:28.000000000 +0200
+@@ -411,7 +411,7 @@
+  * These values account for -1s required.
+  */
+-static const struct tv_mode tv_modes[] = {
++const static struct tv_mode tv_modes[] = {
+       {
+               .name           = "NTSC-M",
+               .clock          = 107520,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/Kconfig linux-2.6.29-rc3.owrt/drivers/gpu/drm/Kconfig
+--- linux-2.6.29.owrt/drivers/gpu/drm/Kconfig  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/Kconfig      2009-05-10 23:48:28.000000000 +0200
+@@ -70,7 +70,7 @@
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+-      select FB
++      depends on FB
+       tristate "i915 driver"
+       help
+         Choose this option if you have a system that has Intel 830M, 845G,
+@@ -80,17 +80,18 @@
+         XFree86 4.4 and above. If unsure, build this and i830 as modules and
+         the X server will load the correct one.
++endchoice
++
+ config DRM_I915_KMS
+       bool "Enable modesetting on intel by default"
+       depends on DRM_I915
+       help
+-        Choose this option if you want kernel modesetting enabled by default,
+-        and you have a new enough userspace to support this. Running old
+-        userspaces with this enabled will cause pain.  Note that this causes
+-        the driver to bind to PCI devices, which precludes loading things
+-        like intelfb.
++      Choose this option if you want kernel modesetting enabled by default,
++      and you have a new enough userspace to support this. Running old
++      userspaces with this enabled will cause pain.  Note that this causes
++      the driver to bind to PCI devices, which precludes loading things
++      like intelfb.
+-endchoice
+ config DRM_MGA
+       tristate "Matrox g200/g400"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/gpu/drm/radeon/radeon_cp.c linux-2.6.29-rc3.owrt/drivers/gpu/drm/radeon/radeon_cp.c
+--- linux-2.6.29.owrt/drivers/gpu/drm/radeon/radeon_cp.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/gpu/drm/radeon/radeon_cp.c   2009-05-10 23:48:28.000000000 +0200
+@@ -557,10 +557,8 @@
+ }
+ static void radeon_cp_init_ring_buffer(struct drm_device * dev,
+-                                     drm_radeon_private_t *dev_priv,
+-                                     struct drm_file *file_priv)
++                                     drm_radeon_private_t * dev_priv)
+ {
+-      struct drm_radeon_master_private *master_priv;
+       u32 ring_start, cur_read_ptr;
+       u32 tmp;
+@@ -679,14 +677,6 @@
+       dev_priv->scratch[2] = 0;
+       RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0);
+-      /* reset sarea copies of these */
+-      master_priv = file_priv->master->driver_priv;
+-      if (master_priv->sarea_priv) {
+-              master_priv->sarea_priv->last_frame = 0;
+-              master_priv->sarea_priv->last_dispatch = 0;
+-              master_priv->sarea_priv->last_clear = 0;
+-      }
+-
+       radeon_do_wait_for_idle(dev_priv);
+       /* Sync everything up */
+@@ -1049,9 +1039,9 @@
+ #if __OS_HAS_AGP
+       if (dev_priv->flags & RADEON_IS_AGP) {
+-              drm_core_ioremap_wc(dev_priv->cp_ring, dev);
+-              drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+-              drm_core_ioremap_wc(dev->agp_buffer_map, dev);
++              drm_core_ioremap(dev_priv->cp_ring, dev);
++              drm_core_ioremap(dev_priv->ring_rptr, dev);
++              drm_core_ioremap(dev->agp_buffer_map, dev);
+               if (!dev_priv->cp_ring->handle ||
+                   !dev_priv->ring_rptr->handle ||
+                   !dev->agp_buffer_map->handle) {
+@@ -1225,7 +1215,7 @@
+       }
+       radeon_cp_load_microcode(dev_priv);
+-      radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
++      radeon_cp_init_ring_buffer(dev, dev_priv);
+       dev_priv->last_buf = 0;
+@@ -1291,7 +1281,7 @@
+  *
+  * Charl P. Botha <http://cpbotha.net>
+  */
+-static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv)
++static int radeon_do_resume_cp(struct drm_device * dev)
+ {
+       drm_radeon_private_t *dev_priv = dev->dev_private;
+@@ -1314,7 +1304,7 @@
+       }
+       radeon_cp_load_microcode(dev_priv);
+-      radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
++      radeon_cp_init_ring_buffer(dev, dev_priv);
+       radeon_do_engine_reset(dev);
+       radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
+@@ -1489,7 +1479,8 @@
+  */
+ int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv)
+ {
+-      return radeon_do_resume_cp(dev, file_priv);
++
++      return radeon_do_resume_cp(dev);
+ }
+ int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hid/hid-core.c linux-2.6.29-rc3.owrt/drivers/hid/hid-core.c
+--- linux-2.6.29.owrt/drivers/hid/hid-core.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hid/hid-core.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1218,7 +1218,6 @@
+ }
+ EXPORT_SYMBOL_GPL(hid_connect);
+-/* a list of devices for which there is a specialized driver on HID bus */
+ static const struct hid_device_id hid_blacklist[] = {
+       { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
+@@ -1300,13 +1299,7 @@
+       { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
+       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
+       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
+@@ -1483,7 +1476,6 @@
+       .uevent         = hid_uevent,
+ };
+-/* a list of devices that shouldn't be handled by HID core at all */
+ static const struct hid_device_id hid_ignore_list[] = {
+       { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) },
+@@ -1611,14 +1603,15 @@
+       { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) },
+-      { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
+@@ -1629,6 +1622,8 @@
+       { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
++      { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
+       { }
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hid/hid-ids.h linux-2.6.29-rc3.owrt/drivers/hid/hid-ids.h
+--- linux-2.6.29.owrt/drivers/hid/hid-ids.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hid/hid-ids.h        2009-05-10 23:48:28.000000000 +0200
+@@ -348,9 +348,6 @@
+ #define USB_VENDOR_ID_PLAYDOTCOM      0x0b43
+ #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII    0x0003
+-#define USB_VENDOR_ID_POWERCOM                0x0d9f
+-#define USB_DEVICE_ID_POWERCOM_UPS    0x0002
+-
+ #define USB_VENDOR_ID_SAITEK          0x06a3
+ #define USB_DEVICE_ID_SAITEK_RUMBLEPAD        0xff17
+@@ -365,8 +362,6 @@
+ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD     0x0038
+ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2    0x0036
+ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3    0x0034
+-#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4    0x0044
+-#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5    0x0045
+ #define USB_VENDOR_ID_SUN             0x0430
+ #define USB_DEVICE_ID_RARITAN_KVM_DONGLE      0xcdab
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hid/hid-microsoft.c linux-2.6.29-rc3.owrt/drivers/hid/hid-microsoft.c
+--- linux-2.6.29.owrt/drivers/hid/hid-microsoft.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hid/hid-microsoft.c  2009-05-10 23:48:28.000000000 +0200
+@@ -30,7 +30,7 @@
+ #define MS_NOGET      0x10
+ /*
+- * Microsoft Wireless Desktop Receiver (Model 1028) has
++ * Microsoft Wireless Desktop Receiver (Model 1028) has several
+  * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
+  */
+ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+@@ -38,12 +38,17 @@
+ {
+       unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+-      if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 &&
++      if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 &&
++                      rdesc[286] == 0x2a && rdesc[304] == 0x19 &&
++                      rdesc[306] == 0x29 && rdesc[352] == 0x1a &&
++                      rdesc[355] == 0x2a && rdesc[557] == 0x19 &&
+                       rdesc[559] == 0x29) {
+               dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver "
+                               "Model 1028 report descriptor\n");
+-              rdesc[557] = 0x35;
+-              rdesc[559] = 0x45;
++              rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
++              rdesc[352] = 0x36;
++              rdesc[286] = rdesc[355] = 0x46;
++              rdesc[306] = rdesc[559] = 0x45;
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hid/hidraw.c linux-2.6.29-rc3.owrt/drivers/hid/hidraw.c
+--- linux-2.6.29.owrt/drivers/hid/hidraw.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hid/hidraw.c 2009-05-10 23:48:28.000000000 +0200
+@@ -267,10 +267,8 @@
+               default:
+                       {
+                               struct hid_device *hid = dev->hid;
+-                              if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
+-                                      ret = -EINVAL;
+-                                      break;
+-                              }
++                              if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
++                                      return -EINVAL;
+                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
+                                       int len;
+@@ -279,9 +277,8 @@
+                                       len = strlen(hid->name) + 1;
+                                       if (len > _IOC_SIZE(cmd))
+                                               len = _IOC_SIZE(cmd);
+-                                      ret = copy_to_user(user_arg, hid->name, len) ?
++                                      return copy_to_user(user_arg, hid->name, len) ?
+                                               -EFAULT : len;
+-                                      break;
+                               }
+                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
+@@ -291,13 +288,12 @@
+                                       len = strlen(hid->phys) + 1;
+                                       if (len > _IOC_SIZE(cmd))
+                                               len = _IOC_SIZE(cmd);
+-                                      ret = copy_to_user(user_arg, hid->phys, len) ?
++                                      return copy_to_user(user_arg, hid->phys, len) ?
+                                               -EFAULT : len;
+-                                      break;
+                               }
+                 }
+-              ret = -ENOTTY;
++                      ret = -ENOTTY;
+       }
+       unlock_kernel();
+       return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hid/usbhid/hiddev.c linux-2.6.29-rc3.owrt/drivers/hid/usbhid/hiddev.c
+--- linux-2.6.29.owrt/drivers/hid/usbhid/hiddev.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hid/usbhid/hiddev.c  2009-05-10 23:48:28.000000000 +0200
+@@ -306,7 +306,7 @@
+       return 0;
+ bail:
+       file->private_data = NULL;
+-      kfree(list);
++      kfree(list->hiddev);
+       return res;
+ }
+@@ -323,7 +323,7 @@
+  */
+ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
+ {
+-      DEFINE_WAIT(wait);
++      DECLARE_WAITQUEUE(wait, current);
+       struct hiddev_list *list = file->private_data;
+       int event_size;
+       int retval;
+@@ -656,7 +656,7 @@
+       case HIDIOCGSTRING:
+               mutex_lock(&hiddev->existancelock);
+-              if (hiddev->exist)
++              if (!hiddev->exist)
+                       r = hiddev_ioctl_string(hiddev, cmd, user_arg);
+               else
+                       r = -ENODEV;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/abituguru3.c linux-2.6.29-rc3.owrt/drivers/hwmon/abituguru3.c
+--- linux-2.6.29.owrt/drivers/hwmon/abituguru3.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/abituguru3.c   2009-05-10 23:48:28.000000000 +0200
+@@ -760,11 +760,8 @@
+       for (i = 0; i < offset_count; i++)
+               if ((x = abituguru3_read(data, bank, offset + i, count,
+-                              buf + i * count)) != count) {
+-                      if (x < 0)
+-                              return x;
+-                      return i * count + x;
+-              }
++                              buf + i * count)) != count)
++                      return i * count + (i && (x < 0)) ? 0 : x;
+       return i * count;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/applesmc.c linux-2.6.29-rc3.owrt/drivers/hwmon/applesmc.c
+--- linux-2.6.29.owrt/drivers/hwmon/applesmc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/applesmc.c     2009-05-10 23:48:28.000000000 +0200
+@@ -83,7 +83,7 @@
+ /*
+  * Temperature sensors keys (sp78 - 2 bytes).
+  */
+-static const char *temperature_sensors_sets[][41] = {
++static const char* temperature_sensors_sets[][36] = {
+ /* Set 0: Macbook Pro */
+       { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
+         "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
+@@ -135,13 +135,6 @@
+       { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
+         "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
+         "Ts0S", NULL },
+-/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
+-      { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
+-        "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
+-        "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
+-        "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
+-        "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
+-        NULL },
+ };
+ /* List of keys used to read/write fan speeds */
+@@ -1160,16 +1153,6 @@
+                                       applesmc_show_temperature, NULL, 33);
+ static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
+                                       applesmc_show_temperature, NULL, 34);
+-static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
+-                                      applesmc_show_temperature, NULL, 35);
+-static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
+-                                      applesmc_show_temperature, NULL, 36);
+-static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
+-                                      applesmc_show_temperature, NULL, 37);
+-static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
+-                                      applesmc_show_temperature, NULL, 38);
+-static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
+-                                      applesmc_show_temperature, NULL, 39);
+ static struct attribute *temperature_attributes[] = {
+       &sensor_dev_attr_temp1_input.dev_attr.attr,
+@@ -1207,11 +1190,6 @@
+       &sensor_dev_attr_temp33_input.dev_attr.attr,
+       &sensor_dev_attr_temp34_input.dev_attr.attr,
+       &sensor_dev_attr_temp35_input.dev_attr.attr,
+-      &sensor_dev_attr_temp36_input.dev_attr.attr,
+-      &sensor_dev_attr_temp37_input.dev_attr.attr,
+-      &sensor_dev_attr_temp38_input.dev_attr.attr,
+-      &sensor_dev_attr_temp39_input.dev_attr.attr,
+-      &sensor_dev_attr_temp40_input.dev_attr.attr,
+       NULL
+ };
+@@ -1334,8 +1312,6 @@
+       { .accelerometer = 0, .light = 0, .temperature_set = 14 },
+ /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
+       { .accelerometer = 1, .light = 1, .temperature_set = 15 },
+-/* MacPro3,1: temperature set 16 */
+-      { .accelerometer = 0, .light = 0, .temperature_set = 16 },
+ };
+ /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
+@@ -1393,10 +1369,6 @@
+         DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+         DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
+               &applesmc_dmi_data[4]},
+-      { applesmc_dmi_match, "Apple MacPro3", {
+-        DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+-        DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
+-              &applesmc_dmi_data[16]},
+       { applesmc_dmi_match, "Apple MacPro", {
+         DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+         DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/f71882fg.c linux-2.6.29-rc3.owrt/drivers/hwmon/f71882fg.c
+--- linux-2.6.29.owrt/drivers/hwmon/f71882fg.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/f71882fg.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1872,7 +1872,7 @@
+       devid = superio_inw(sioaddr, SIO_REG_MANID);
+       if (devid != SIO_FINTEK_ID) {
+-              pr_debug(DRVNAME ": Not a Fintek device\n");
++              printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+               goto exit;
+       }
+@@ -1932,7 +1932,7 @@
+       res.name = f71882fg_pdev->name;
+       err = acpi_check_resource_conflict(&res);
+       if (err)
+-              goto exit_device_put;
++              return err;
+       err = platform_device_add_resources(f71882fg_pdev, &res, 1);
+       if (err) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/f75375s.c linux-2.6.29-rc3.owrt/drivers/hwmon/f75375s.c
+--- linux-2.6.29.owrt/drivers/hwmon/f75375s.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/f75375s.c      2009-05-10 23:48:28.000000000 +0200
+@@ -617,7 +617,7 @@
+ static int f75375_probe(struct i2c_client *client,
+               const struct i2c_device_id *id)
+ {
+-      struct f75375_data *data;
++      struct f75375_data *data = i2c_get_clientdata(client);
+       struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
+       int err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/hp_accel.c linux-2.6.29-rc3.owrt/drivers/hwmon/hp_accel.c
+--- linux-2.6.29.owrt/drivers/hwmon/hp_accel.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/hp_accel.c     2009-05-10 23:48:28.000000000 +0200
+@@ -153,10 +153,7 @@
+ static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
+ static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+ static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
+-static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
+ static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
+-static struct axis_conversion lis3lv02d_axis_xy_rotated_right = {2, -1, 3};
+-static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
+ #define AXIS_DMI_MATCH(_ident, _name, _axis) {                \
+       .ident = _ident,                                \
+@@ -166,18 +163,6 @@
+       },                                              \
+       .driver_data = &lis3lv02d_axis_##_axis          \
+ }
+-
+-#define AXIS_DMI_MATCH2(_ident, _class1, _name1,      \
+-                              _class2, _name2,        \
+-                              _axis) {                \
+-      .ident = _ident,                                \
+-      .callback = lis3lv02d_dmi_matched,              \
+-      .matches = {                                    \
+-              DMI_MATCH(DMI_##_class1, _name1),       \
+-              DMI_MATCH(DMI_##_class2, _name2),       \
+-      },                                              \
+-      .driver_data = &lis3lv02d_axis_##_axis          \
+-}
+ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
+       /* product names are truncated to match all kinds of a same model */
+       AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
+@@ -187,22 +172,10 @@
+       AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+       AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
+       AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
+-      AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
+-      AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+-      AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
+-      AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+-      /* Intel-based HP Pavilion dv5 */
+-      AXIS_DMI_MATCH2("HPDV5_I",
+-                      PRODUCT_NAME, "HP Pavilion dv5",
+-                      BOARD_NAME, "3603",
+-                      x_inverted),
+-      /* AMD-based HP Pavilion dv5 */
+-      AXIS_DMI_MATCH2("HPDV5_A",
+-                      PRODUCT_NAME, "HP Pavilion dv5",
+-                      BOARD_NAME, "3600",
+-                      y_inverted),
+       { NULL, }
+ /* Laptop models without axis info (yet):
++ * "NC651xx" "HP Compaq 651"
++ * "NC671xx" "HP Compaq 671"
+  * "NC6910" "HP Compaq 6910"
+  * HP Compaq 8710x Notebook PC / Mobile Workstation
+  * "NC2400" "HP Compaq nc2400"
+@@ -235,49 +208,9 @@
+       .set_brightness = hpled_set,
+ };
+-static acpi_status
+-lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
+-{
+-      if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+-              struct acpi_resource_extended_irq *irq;
+-              u32 *device_irq = context;
+-
+-              irq = &resource->data.extended_irq;
+-              *device_irq = irq->interrupts[0];
+-      }
+-
+-      return AE_OK;
+-}
+-
+-static void lis3lv02d_enum_resources(struct acpi_device *device)
+-{
+-      acpi_status status;
+-
+-      status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+-                                      lis3lv02d_get_resource, &adev.irq);
+-      if (ACPI_FAILURE(status))
+-              printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
+-}
+-
+-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+-{
+-      u8 lo, hi;
+-
+-      adev.read(handle, reg - 1, &lo);
+-      adev.read(handle, reg, &hi);
+-      /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+-      return (s16)((hi << 8) | lo);
+-}
+-
+-static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
+-{
+-      s8 lo;
+-      adev.read(handle, reg, &lo);
+-      return lo;
+-}
+-
+ static int lis3lv02d_add(struct acpi_device *device)
+ {
++      u8 val;
+       int ret;
+       if (!device)
+@@ -291,22 +224,10 @@
+       strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
+       device->driver_data = &adev;
+-      lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
+-      switch (adev.whoami) {
+-      case LIS_DOUBLE_ID:
+-              printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+-              adev.read_data = lis3lv02d_read_16;
+-              adev.mdps_max_val = 2048;
+-              break;
+-      case LIS_SINGLE_ID:
+-              printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+-              adev.read_data = lis3lv02d_read_8;
+-              adev.mdps_max_val = 128;
+-              break;
+-      default:
++      lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
++      if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+               printk(KERN_ERR DRIVER_NAME
+-                      ": unknown sensor type 0x%X\n", adev.whoami);
+-              return -EINVAL;
++                              ": Accelerometer chip not LIS3LV02D{L,Q}\n");
+       }
+       /* If possible use a "standard" axes order */
+@@ -321,9 +242,6 @@
+       if (ret)
+               return ret;
+-      /* obtain IRQ number of our device from ACPI */
+-      lis3lv02d_enum_resources(adev.device);
+-
+       ret = lis3lv02d_init_device(&adev);
+       if (ret) {
+               flush_work(&hpled_led.work);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/it87.c linux-2.6.29-rc3.owrt/drivers/hwmon/it87.c
+--- linux-2.6.29.owrt/drivers/hwmon/it87.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/it87.c 2009-05-10 23:48:28.000000000 +0200
+@@ -213,7 +213,7 @@
+ #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
+                                       ((val)+500)/1000),-128,127))
+-#define TEMP_FROM_REG(val) ((val) * 1000)
++#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+ #define PWM_TO_REG(val)   ((val) >> 1)
+ #define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+@@ -267,9 +267,9 @@
+       u8 has_fan;             /* Bitfield, fans enabled */
+       u16 fan[5];             /* Register values, possibly combined */
+       u16 fan_min[5];         /* Register values, possibly combined */
+-      s8 temp[3];             /* Register value */
+-      s8 temp_high[3];        /* Register value */
+-      s8 temp_low[3];         /* Register value */
++      u8 temp[3];             /* Register value */
++      u8 temp_high[3];        /* Register value */
++      u8 temp_low[3];         /* Register value */
+       u8 sensor;              /* Register value */
+       u8 fan_div[3];          /* Register encoding, shifted right */
+       u8 vid;                 /* Register encoding, combined */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/Kconfig linux-2.6.29-rc3.owrt/drivers/hwmon/Kconfig
+--- linux-2.6.29.owrt/drivers/hwmon/Kconfig    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/Kconfig        2009-05-10 23:48:28.000000000 +0200
+@@ -543,8 +543,8 @@
+       help
+         If you say yes here you get support for National Semiconductor LM90,
+         LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+-        MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+-        MAX6680, MAX6681 and MAX6692 sensor chips.
++        MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
++        MAX6681 sensor chips.
+         This driver can also be built as a module.  If so, the module
+         will be called lm90.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/lis3lv02d.c linux-2.6.29-rc3.owrt/drivers/hwmon/lis3lv02d.c
+--- linux-2.6.29.owrt/drivers/hwmon/lis3lv02d.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/lis3lv02d.c    2009-05-10 23:48:28.000000000 +0200
+@@ -3,7 +3,7 @@
+  *
+  *  Copyright (C) 2007-2008 Yan Burman
+  *  Copyright (C) 2008 Eric Piel
+- *  Copyright (C) 2008-2009 Pavel Machek
++ *  Copyright (C) 2008 Pavel Machek
+  *
+  *  This program is free software; you can redistribute it and/or modify
+  *  it under the terms of the GNU General Public License as published by
+@@ -35,7 +35,6 @@
+ #include <linux/poll.h>
+ #include <linux/freezer.h>
+ #include <linux/uaccess.h>
+-#include <linux/miscdevice.h>
+ #include <acpi/acpi_drivers.h>
+ #include <asm/atomic.h>
+ #include "lis3lv02d.h"
+@@ -53,14 +52,24 @@
+  * joystick.
+  */
+-struct acpi_lis3lv02d adev = {
+-      .misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+-};
++/* Maximum value our axis may get for the input device (signed 12 bits) */
++#define MDPS_MAX_VAL 2048
++struct acpi_lis3lv02d adev;
+ EXPORT_SYMBOL_GPL(adev);
+ static int lis3lv02d_add_fs(struct acpi_device *device);
++static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
++{
++      u8 lo, hi;
++
++      adev.read(handle, reg, &lo);
++      adev.read(handle, reg + 1, &hi);
++      /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
++      return (s16)((hi << 8) | lo);
++}
++
+ /**
+  * lis3lv02d_get_axis - For the given axis, give the value converted
+  * @axis:      1,2,3 - can also be negative
+@@ -89,9 +98,9 @@
+ {
+       int position[3];
+-      position[0] = adev.read_data(handle, OUTX);
+-      position[1] = adev.read_data(handle, OUTY);
+-      position[2] = adev.read_data(handle, OUTZ);
++      position[0] = lis3lv02d_read_16(handle, OUTX_L);
++      position[1] = lis3lv02d_read_16(handle, OUTY_L);
++      position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+       *x = lis3lv02d_get_axis(adev.ac.x, position);
+       *y = lis3lv02d_get_axis(adev.ac.y, position);
+@@ -101,13 +110,26 @@
+ void lis3lv02d_poweroff(acpi_handle handle)
+ {
+       adev.is_on = 0;
++      /* disable X,Y,Z axis and power down */
++      adev.write(handle, CTRL_REG1, 0x00);
+ }
+ EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
+ void lis3lv02d_poweron(acpi_handle handle)
+ {
++      u8 val;
++
+       adev.is_on = 1;
+       adev.init(handle);
++      adev.write(handle, FF_WU_CFG, 0);
++      /*
++       * BDU: LSB and MSB values are not updated until both have been read.
++       *      So the value read will always be correct.
++       * IEN: Interrupt for free-fall and DD, not for data-ready.
++       */
++      adev.read(handle, CTRL_REG2, &val);
++      val |= CTRL2_BDU | CTRL2_IEN;
++      adev.write(handle, CTRL_REG2, val);
+ }
+ EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
+@@ -140,140 +162,6 @@
+       mutex_unlock(&dev->lock);
+ }
+-static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+-{
+-      /*
+-       * Be careful: on some HP laptops the bios force DD when on battery and
+-       * the lid is closed. This leads to interrupts as soon as a little move
+-       * is done.
+-       */
+-      atomic_inc(&adev.count);
+-
+-      wake_up_interruptible(&adev.misc_wait);
+-      kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+-      return IRQ_HANDLED;
+-}
+-
+-static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+-{
+-      int ret;
+-
+-      if (test_and_set_bit(0, &adev.misc_opened))
+-              return -EBUSY; /* already open */
+-
+-      atomic_set(&adev.count, 0);
+-
+-      /*
+-       * The sensor can generate interrupts for free-fall and direction
+-       * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+-       * the things simple and _fast_ we activate it only for free-fall, so
+-       * no need to read register (very slow with ACPI). For the same reason,
+-       * we forbid shared interrupts.
+-       *
+-       * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+-       * io-apic is not configurable (and generates a warning) but I keep it
+-       * in case of support for other hardware.
+-       */
+-      ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+-                        DRIVER_NAME, &adev);
+-
+-      if (ret) {
+-              clear_bit(0, &adev.misc_opened);
+-              printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+-              return -EBUSY;
+-      }
+-      lis3lv02d_increase_use(&adev);
+-      printk("lis3: registered interrupt %d\n", adev.irq);
+-      return 0;
+-}
+-
+-static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+-{
+-      fasync_helper(-1, file, 0, &adev.async_queue);
+-      lis3lv02d_decrease_use(&adev);
+-      free_irq(adev.irq, &adev);
+-      clear_bit(0, &adev.misc_opened); /* release the device */
+-      return 0;
+-}
+-
+-static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+-                              size_t count, loff_t *pos)
+-{
+-      DECLARE_WAITQUEUE(wait, current);
+-      u32 data;
+-      unsigned char byte_data;
+-      ssize_t retval = 1;
+-
+-      if (count < 1)
+-              return -EINVAL;
+-
+-      add_wait_queue(&adev.misc_wait, &wait);
+-      while (true) {
+-              set_current_state(TASK_INTERRUPTIBLE);
+-              data = atomic_xchg(&adev.count, 0);
+-              if (data)
+-                      break;
+-
+-              if (file->f_flags & O_NONBLOCK) {
+-                      retval = -EAGAIN;
+-                      goto out;
+-              }
+-
+-              if (signal_pending(current)) {
+-                      retval = -ERESTARTSYS;
+-                      goto out;
+-              }
+-
+-              schedule();
+-      }
+-
+-      if (data < 255)
+-              byte_data = data;
+-      else
+-              byte_data = 255;
+-
+-      /* make sure we are not going into copy_to_user() with
+-       * TASK_INTERRUPTIBLE state */
+-      set_current_state(TASK_RUNNING);
+-      if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+-              retval = -EFAULT;
+-
+-out:
+-      __set_current_state(TASK_RUNNING);
+-      remove_wait_queue(&adev.misc_wait, &wait);
+-
+-      return retval;
+-}
+-
+-static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+-{
+-      poll_wait(file, &adev.misc_wait, wait);
+-      if (atomic_read(&adev.count))
+-              return POLLIN | POLLRDNORM;
+-      return 0;
+-}
+-
+-static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+-{
+-      return fasync_helper(fd, file, on, &adev.async_queue);
+-}
+-
+-static const struct file_operations lis3lv02d_misc_fops = {
+-      .owner   = THIS_MODULE,
+-      .llseek  = no_llseek,
+-      .read    = lis3lv02d_misc_read,
+-      .open    = lis3lv02d_misc_open,
+-      .release = lis3lv02d_misc_release,
+-      .poll    = lis3lv02d_misc_poll,
+-      .fasync  = lis3lv02d_misc_fasync,
+-};
+-
+-static struct miscdevice lis3lv02d_misc_device = {
+-      .minor   = MISC_DYNAMIC_MINOR,
+-      .name    = "freefall",
+-      .fops    = &lis3lv02d_misc_fops,
+-};
+-
+ /**
+  * lis3lv02d_joystick_kthread - Kthread polling function
+  * @data: unused - here to conform to threadfn prototype
+@@ -315,6 +203,7 @@
+       lis3lv02d_decrease_use(&adev);
+ }
++
+ static inline void lis3lv02d_calibrate_joystick(void)
+ {
+       lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
+@@ -342,9 +231,9 @@
+       adev.idev->close      = lis3lv02d_joystick_close;
+       set_bit(EV_ABS, adev.idev->evbit);
+-      input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+-      input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+-      input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
++      input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
++      input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
++      input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+       err = input_register_device(adev.idev);
+       if (err) {
+@@ -361,7 +250,6 @@
+       if (!adev.idev)
+               return;
+-      misc_deregister(&lis3lv02d_misc_device);
+       input_unregister_device(adev.idev);
+       adev.idev = NULL;
+ }
+@@ -380,19 +268,6 @@
+       if (lis3lv02d_joystick_enable())
+               printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+-      printk("lis3_init_device: irq %d\n", dev->irq);
+-
+-      /* if we did not get an IRQ from ACPI - we have nothing more to do */
+-      if (!dev->irq) {
+-              printk(KERN_ERR DRIVER_NAME
+-                      ": No IRQ in ACPI. Disabling /dev/freefall\n");
+-              goto out;
+-      }
+-
+-      printk("lis3: registering device\n");
+-      if (misc_register(&lis3lv02d_misc_device))
+-              printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+-out:
+       lis3lv02d_decrease_use(dev);
+       return 0;
+ }
+@@ -476,6 +351,6 @@
+ EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
+ MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
+-MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
++MODULE_AUTHOR("Yan Burman and Eric Piel");
+ MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/lis3lv02d.h linux-2.6.29-rc3.owrt/drivers/hwmon/lis3lv02d.h
+--- linux-2.6.29.owrt/drivers/hwmon/lis3lv02d.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/lis3lv02d.h    2009-05-10 23:48:28.000000000 +0200
+@@ -22,15 +22,12 @@
+ /*
+  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
+  * be connected via SPI. There exists also several similar chips (such as LIS302DL or
+- * LIS3L02DQ) and they have slightly different registers, but we can provide a
+- * common interface for all of them.
++ * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+  * They can also be connected via I²C.
+  */
+-/* 2-byte registers */
+-#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
+-/* 1-byte registers */
+-#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
++#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */
++#define LIS302DL_ID   0x3B /* Also the LIS202DL! */
+ enum lis3lv02d_reg {
+       WHO_AM_I        = 0x0F,
+@@ -47,13 +44,10 @@
+       STATUS_REG      = 0x27,
+       OUTX_L          = 0x28,
+       OUTX_H          = 0x29,
+-      OUTX            = 0x29,
+       OUTY_L          = 0x2A,
+       OUTY_H          = 0x2B,
+-      OUTY            = 0x2B,
+       OUTZ_L          = 0x2C,
+       OUTZ_H          = 0x2D,
+-      OUTZ            = 0x2D,
+       FF_WU_CFG       = 0x30,
+       FF_WU_SRC       = 0x31,
+       FF_WU_ACK       = 0x32,
+@@ -165,10 +159,6 @@
+       acpi_status (*write) (acpi_handle handle, int reg, u8 val);
+       acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+-      u8                      whoami;    /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+-      s16 (*read_data) (acpi_handle handle, int reg);
+-      int                     mdps_max_val;
+-
+       struct input_dev        *idev;     /* input device */
+       struct task_struct      *kthread;  /* kthread for input */
+       struct mutex            lock;
+@@ -180,11 +170,6 @@
+       unsigned char           is_on;     /* whether the device is on or off */
+       unsigned char           usage;     /* usage counter */
+       struct axis_conversion  ac;        /* hw -> logical axis */
+-
+-      u32                     irq;       /* IRQ number */
+-      struct fasync_struct    *async_queue; /* queue for the misc device */
+-      wait_queue_head_t       misc_wait; /* Wait queue for the misc device */
+-      unsigned long           misc_opened; /* bit0: whether the device is open */
+ };
+ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/lm85.c linux-2.6.29-rc3.owrt/drivers/hwmon/lm85.c
+--- linux-2.6.29.owrt/drivers/hwmon/lm85.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/lm85.c 2009-05-10 23:48:28.000000000 +0200
+@@ -72,7 +72,6 @@
+ #define       LM85_COMPANY_SMSC               0x5c
+ #define       LM85_VERSTEP_VMASK              0xf0
+ #define       LM85_VERSTEP_GENERIC            0x60
+-#define       LM85_VERSTEP_GENERIC2           0x70
+ #define       LM85_VERSTEP_LM85C              0x60
+ #define       LM85_VERSTEP_LM85B              0x62
+ #define       LM85_VERSTEP_ADM1027            0x60
+@@ -335,7 +334,6 @@
+ static const struct i2c_device_id lm85_id[] = {
+       { "adm1027", adm1027 },
+       { "adt7463", adt7463 },
+-      { "adt7468", adt7468 },
+       { "lm85", any_chip },
+       { "lm85b", lm85b },
+       { "lm85c", lm85c },
+@@ -410,8 +408,7 @@
+       struct lm85_data *data = lm85_update_device(dev);
+       int vid;
+-      if ((data->type == adt7463 || data->type == adt7468) &&
+-          (data->vid & 0x80)) {
++      if (data->type == adt7463 && (data->vid & 0x80)) {
+               /* 6-pin VID (VRM 10) */
+               vid = vid_from_reg(data->vid & 0x3f, data->vrm);
+       } else {
+@@ -1156,8 +1153,7 @@
+                       address, company, verstep);
+               /* All supported chips have the version in common */
+-              if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+-                  (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
++              if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+                       dev_dbg(&adapter->dev, "Autodetection failed: "
+                               "unsupported version\n");
+                       return -ENODEV;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/lm90.c linux-2.6.29-rc3.owrt/drivers/hwmon/lm90.c
+--- linux-2.6.29.owrt/drivers/hwmon/lm90.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/lm90.c 2009-05-10 23:48:28.000000000 +0200
+@@ -32,10 +32,10 @@
+  * supported by this driver. These chips lack the remote temperature
+  * offset feature.
+  *
+- * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
+- * MAX6692 chips made by Maxim.  These are again similar to the LM86,
+- * but they use unsigned temperature values and can report temperatures
+- * from 0 to 145 degrees.
++ * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
++ * made by Maxim.  These are again similar to the LM86, but they use
++ * unsigned temperature values and can report temperatures from 0 to
++ * 145 degrees.
+  *
+  * This driver also supports the MAX6680 and MAX6681, two other sensor
+  * chips made by Maxim. These are quite similar to the other Maxim
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/vt1211.c linux-2.6.29-rc3.owrt/drivers/hwmon/vt1211.c
+--- linux-2.6.29.owrt/drivers/hwmon/vt1211.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/vt1211.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1262,7 +1262,7 @@
+       res.name = pdev->name;
+       err = acpi_check_resource_conflict(&res);
+       if (err)
+-              goto EXIT_DEV_PUT;
++              goto EXIT;
+       err = platform_device_add_resources(pdev, &res, 1);
+       if (err) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/hwmon/w83627ehf.c linux-2.6.29-rc3.owrt/drivers/hwmon/w83627ehf.c
+--- linux-2.6.29.owrt/drivers/hwmon/w83627ehf.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/hwmon/w83627ehf.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1548,7 +1548,7 @@
+       err = acpi_check_resource_conflict(&res);
+       if (err)
+-              goto exit_device_put;
++              goto exit;
+       err = platform_device_add_resources(pdev, &res, 1);
+       if (err) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/i2c-acorn.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-acorn.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/i2c-acorn.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-acorn.c       2009-05-10 23:48:28.000000000 +0200
+@@ -79,11 +79,10 @@
+       .getsda         = ioc_getsda,
+       .getscl         = ioc_getscl,
+       .udelay         = 80,
+-      .timeout        = HZ,
++      .timeout        = 100
+ };
+ static struct i2c_adapter ioc_ops = {
+-      .nr                     = 0,
+       .algo_data              = &ioc_data,
+ };
+@@ -91,7 +90,7 @@
+ {
+       force_ones = FORCE_ONES | SCL | SDA;
+-      return i2c_bit_add_numbered_bus(&ioc_ops);
++      return i2c_bit_add_bus(&ioc_ops);
+ }
+ module_init(i2c_ioc_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/i2c-amd8111.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-amd8111.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/i2c-amd8111.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-amd8111.c     2009-05-10 23:48:28.000000000 +0200
+@@ -72,7 +72,7 @@
+ {
+       int timeout = 500;
+-      while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout)
++      while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF))
+               udelay(1);
+       if (!timeout) {
+@@ -88,7 +88,7 @@
+ {
+       int timeout = 500;
+-      while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout)
++      while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF))
+               udelay(1);
+       if (!timeout) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/i2c-ixp2000.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-ixp2000.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/i2c-ixp2000.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-ixp2000.c     2009-05-10 23:48:28.000000000 +0200
+@@ -114,7 +114,7 @@
+       drv_data->algo_data.getsda = ixp2000_bit_getsda;
+       drv_data->algo_data.getscl = ixp2000_bit_getscl;
+       drv_data->algo_data.udelay = 6;
+-      drv_data->algo_data.timeout = HZ;
++      drv_data->algo_data.timeout = 100;
+       strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
+               sizeof(drv_data->adapter.name));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/i2c-mv64xxx.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-mv64xxx.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/i2c-mv64xxx.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-mv64xxx.c     2009-05-10 23:48:28.000000000 +0200
+@@ -482,7 +482,7 @@
+       return 0;
+ }
+-static void
++static void __devexit
+ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
+ {
+       if (drv_data->reg_base) {
+@@ -577,7 +577,7 @@
+ static struct platform_driver mv64xxx_i2c_driver = {
+       .probe  = mv64xxx_i2c_probe,
+-      .remove = __devexit_p(mv64xxx_i2c_remove),
++      .remove = mv64xxx_i2c_remove,
+       .driver = {
+               .owner  = THIS_MODULE,
+               .name   = MV64XXX_I2C_CTLR_NAME,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/i2c-pxa.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-pxa.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/i2c-pxa.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-pxa.c 2009-05-10 23:48:28.000000000 +0200
+@@ -644,7 +644,7 @@
+       i2c_pxa_start_message(i2c);
+-      while (i2c->msg_num > 0 && --timeout) {
++      while (timeout-- && i2c->msg_num > 0) {
+               i2c_pxa_handler(0, i2c);
+               udelay(10);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/busses/scx200_i2c.c linux-2.6.29-rc3.owrt/drivers/i2c/busses/scx200_i2c.c
+--- linux-2.6.29.owrt/drivers/i2c/busses/scx200_i2c.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/busses/scx200_i2c.c      2009-05-10 23:48:28.000000000 +0200
+@@ -76,7 +76,7 @@
+       .getsda         = scx200_i2c_getsda,
+       .getscl         = scx200_i2c_getscl,
+       .udelay         = 10,
+-      .timeout        = HZ,
++      .timeout        = 100,
+ };
+ static struct i2c_adapter scx200_i2c_ops = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/i2c-core.c linux-2.6.29-rc3.owrt/drivers/i2c/i2c-core.c
+--- linux-2.6.29.owrt/drivers/i2c/i2c-core.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/i2c-core.c       2009-05-10 23:48:28.000000000 +0200
+@@ -1831,8 +1831,7 @@
+       case I2C_SMBUS_QUICK:
+               msg[0].len = 0;
+               /* Special case: The read/write field is used as data */
+-              msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+-                                      I2C_M_RD : 0);
++              msg[0].flags = flags | (read_write==I2C_SMBUS_READ)?I2C_M_RD:0;
+               num = 1;
+               break;
+       case I2C_SMBUS_BYTE:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/i2c/i2c-dev.c linux-2.6.29-rc3.owrt/drivers/i2c/i2c-dev.c
+--- linux-2.6.29.owrt/drivers/i2c/i2c-dev.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/i2c/i2c-dev.c        2009-05-10 23:48:28.000000000 +0200
+@@ -35,7 +35,6 @@
+ #include <linux/i2c.h>
+ #include <linux/i2c-dev.h>
+ #include <linux/smp_lock.h>
+-#include <linux/jiffies.h>
+ #include <asm/uaccess.h>
+ static struct i2c_driver i2cdev_driver;
+@@ -423,10 +422,7 @@
+               client->adapter->retries = arg;
+               break;
+       case I2C_TIMEOUT:
+-              /* For historical reasons, user-space sets the timeout
+-               * value in units of 10 ms.
+-               */
+-              client->adapter->timeout = msecs_to_jiffies(arg * 10);
++              client->adapter->timeout = arg;
+               break;
+       default:
+               /* NOTE:  returning a fault code here could cause trouble
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/amd74xx.c linux-2.6.29-rc3.owrt/drivers/ide/amd74xx.c
+--- linux-2.6.29.owrt/drivers/ide/amd74xx.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/amd74xx.c        2009-05-10 23:48:28.000000000 +0200
+@@ -166,7 +166,7 @@
+        * Check for broken FIFO support.
+        */
+       if (dev->vendor == PCI_VENDOR_ID_AMD &&
+-          dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
++          dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+               t &= 0x0f;
+       else
+               t |= 0xf0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/at91_ide.c linux-2.6.29-rc3.owrt/drivers/ide/at91_ide.c
+--- linux-2.6.29.owrt/drivers/ide/at91_ide.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/at91_ide.c       1970-01-01 01:00:00.000000000 +0100
+@@ -1,467 +0,0 @@
+-/*
+- * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+- * with Compact Flash True IDE logic
+- *
+- * Copyright (c) 2008, 2009 Kelvatek Ltd.
+- *
+- *  This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+- *
+- */
+-
+-#include <linux/version.h>
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/clk.h>
+-#include <linux/err.h>
+-#include <linux/ide.h>
+-#include <linux/platform_device.h>
+-
+-#include <mach/board.h>
+-#include <mach/gpio.h>
+-#include <mach/at91sam9263.h>
+-#include <mach/at91sam9_smc.h>
+-#include <mach/at91sam9263_matrix.h>
+-
+-#define DRV_NAME "at91_ide"
+-
+-#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+-#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+-
+-/*
+- * Access to IDE device is possible through EBI Static Memory Controller
+- * with Compact Flash logic. For details see EBI and SMC datasheet sections
+- * of any microcontroller from AT91SAM9 family.
+- *
+- * Within SMC chip select address space, lines A[23:21] distinguish Compact
+- * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+- *   0x00c0000 - True IDE
+- *   0x00e0000 - Alternate True IDE (Alt Status Register)
+- *
+- * On True IDE mode Task File and Data Register are mapped at the same address.
+- * To distinguish access between these two different bus data width is used:
+- * 8Bit for Task File, 16Bit for Data I/O.
+- *
+- * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+- * only inside IDE callback routines which are serialized by IDE layer,
+- * so no additional locking needed.
+- */
+-
+-#define TASK_FILE     0x00c00000
+-#define ALT_MODE      0x00e00000
+-#define REGS_SIZE     8
+-
+-#define enter_16bit(cs, mode) do {                                    \
+-      mode = at91_sys_read(AT91_SMC_MODE(cs));                        \
+-      at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16);      \
+-} while (0)
+-
+-#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+-
+-static void set_smc_timings(const u8 chipselect, const u16 cycle,
+-                          const u16 setup, const u16 pulse,
+-                          const u16 data_float, int use_iordy)
+-{
+-      unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+-                           AT91_SMC_BAT_SELECT;
+-
+-      /* disable or enable waiting for IORDY signal */
+-      if (use_iordy)
+-              mode |= AT91_SMC_EXNWMODE_READY;
+-
+-      /* add data float cycles if needed */
+-      if (data_float)
+-              mode |= AT91_SMC_TDF_(data_float);
+-
+-      at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+-
+-      /* setup timings in SMC */
+-      at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+-                                                 AT91_SMC_NCS_WRSETUP_(0) |
+-                                                 AT91_SMC_NRDSETUP_(setup) |
+-                                                 AT91_SMC_NCS_RDSETUP_(0));
+-      at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+-                                                 AT91_SMC_NCS_WRPULSE_(cycle) |
+-                                                 AT91_SMC_NRDPULSE_(pulse) |
+-                                                 AT91_SMC_NCS_RDPULSE_(cycle));
+-      at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+-                                                 AT91_SMC_NRDCYCLE_(cycle));
+-}
+-
+-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+-{
+-      u64 tmp = ns;
+-
+-      tmp *= mck_hz;
+-      tmp += 1000*1000*1000 - 1; /* round up */
+-      do_div(tmp, 1000*1000*1000);
+-      return (unsigned int) tmp;
+-}
+-
+-static void apply_timings(const u8 chipselect, const u8 pio,
+-                        const struct ide_timing *timing, int use_iordy)
+-{
+-      unsigned int t0, t1, t2, t6z;
+-      unsigned int cycle, setup, pulse, data_float;
+-      unsigned int mck_hz;
+-      struct clk *mck;
+-
+-      /* see table 22 of Compact Flash standard 4.1 for the meaning,
+-       * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+-       * assure at least minimal recovery (t2i) time */
+-      t0 = timing->cyc8b;
+-      t1 = timing->setup;
+-      t2 = timing->act8b;
+-      t6z = (pio < 5) ? 30 : 20;
+-
+-      pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+-
+-      mck = clk_get(NULL, "mck");
+-      BUG_ON(IS_ERR(mck));
+-      mck_hz = clk_get_rate(mck);
+-      pdbg("mck_hz=%u\n", mck_hz);
+-
+-      cycle = calc_mck_cycles(t0, mck_hz);
+-      setup = calc_mck_cycles(t1, mck_hz);
+-      pulse = calc_mck_cycles(t2, mck_hz);
+-      data_float = calc_mck_cycles(t6z, mck_hz);
+-
+-      pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+-           cycle, setup, pulse, data_float);
+-
+-      set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+-}
+-
+-static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+-                              void *buf, unsigned int len)
+-{
+-      ide_hwif_t *hwif = drive->hwif;
+-      struct ide_io_ports *io_ports = &hwif->io_ports;
+-      u8 chipselect = hwif->select_data;
+-      unsigned long mode;
+-
+-      pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+-
+-      len++;
+-
+-      enter_16bit(chipselect, mode);
+-      __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+-      leave_16bit(chipselect, mode);
+-}
+-
+-static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+-                               void *buf, unsigned int len)
+-{
+-      ide_hwif_t *hwif = drive->hwif;
+-      struct ide_io_ports *io_ports = &hwif->io_ports;
+-      u8 chipselect = hwif->select_data;
+-      unsigned long mode;
+-
+-      pdbg("cs %u buf %p len %d\n", chipselect,  buf, len);
+-
+-      enter_16bit(chipselect, mode);
+-      __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+-      leave_16bit(chipselect, mode);
+-}
+-
+-static u8 ide_mm_inb(unsigned long port)
+-{
+-      return readb((void __iomem *) port);
+-}
+-
+-static void ide_mm_outb(u8 value, unsigned long port)
+-{
+-      writeb(value, (void __iomem *) port);
+-}
+-
+-static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+-{
+-      ide_hwif_t *hwif = drive->hwif;
+-      struct ide_io_ports *io_ports = &hwif->io_ports;
+-      struct ide_taskfile *tf = &task->tf;
+-      u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+-
+-      if (task->tf_flags & IDE_TFLAG_FLAGGED)
+-              HIHI = 0xFF;
+-
+-      if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+-              u16 data = (tf->hob_data << 8) | tf->data;
+-
+-              at91_ide_output_data(drive, NULL, &data, 2);
+-      }
+-
+-      if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+-              ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+-              ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+-              ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+-              ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+-              ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+-
+-      if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+-              ide_mm_outb(tf->feature, io_ports->feature_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+-              ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+-              ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+-              ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+-      if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+-              ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+-
+-      if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+-              ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+-}
+-
+-static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+-{
+-      ide_hwif_t *hwif = drive->hwif;
+-      struct ide_io_ports *io_ports = &hwif->io_ports;
+-      struct ide_taskfile *tf = &task->tf;
+-
+-      if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+-              u16 data;
+-
+-              at91_ide_input_data(drive, NULL, &data, 2);
+-              tf->data = data & 0xff;
+-              tf->hob_data = (data >> 8) & 0xff;
+-      }
+-
+-      /* be sure we're looking at the low order bits */
+-      ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+-
+-      if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+-              tf->feature = ide_mm_inb(io_ports->feature_addr);
+-      if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+-              tf->nsect  = ide_mm_inb(io_ports->nsect_addr);
+-      if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+-              tf->lbal   = ide_mm_inb(io_ports->lbal_addr);
+-      if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+-              tf->lbam   = ide_mm_inb(io_ports->lbam_addr);
+-      if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+-              tf->lbah   = ide_mm_inb(io_ports->lbah_addr);
+-      if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+-              tf->device = ide_mm_inb(io_ports->device_addr);
+-
+-      if (task->tf_flags & IDE_TFLAG_LBA48) {
+-              ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+-
+-              if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+-                      tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+-              if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+-                      tf->hob_nsect   = ide_mm_inb(io_ports->nsect_addr);
+-              if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+-                      tf->hob_lbal    = ide_mm_inb(io_ports->lbal_addr);
+-              if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+-                      tf->hob_lbam    = ide_mm_inb(io_ports->lbam_addr);
+-              if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+-                      tf->hob_lbah    = ide_mm_inb(io_ports->lbah_addr);
+-      }
+-}
+-
+-static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+-{
+-      struct ide_timing *timing;
+-      u8 chipselect = drive->hwif->select_data;
+-      int use_iordy = 0;
+-
+-      pdbg("chipselect %u pio %u\n", chipselect, pio);
+-
+-      timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+-      BUG_ON(!timing);
+-
+-      if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+-          !(ata_id_is_cfa(drive->id) && pio > 4))
+-              use_iordy = 1;
+-
+-      apply_timings(chipselect, pio, timing, use_iordy);
+-}
+-
+-static const struct ide_tp_ops at91_ide_tp_ops = {
+-      .exec_command   = ide_exec_command,
+-      .read_status    = ide_read_status,
+-      .read_altstatus = ide_read_altstatus,
+-      .set_irq        = ide_set_irq,
+-
+-      .tf_load        = at91_ide_tf_load,
+-      .tf_read        = at91_ide_tf_read,
+-
+-      .input_data     = at91_ide_input_data,
+-      .output_data    = at91_ide_output_data,
+-};
+-
+-static const struct ide_port_ops at91_ide_port_ops = {
+-      .set_pio_mode   = at91_ide_set_pio_mode,
+-};
+-
+-static const struct ide_port_info at91_ide_port_info __initdata = {
+-      .port_ops       = &at91_ide_port_ops,
+-      .tp_ops         = &at91_ide_tp_ops,
+-      .host_flags     = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+-                        IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+-      .pio_mask       = ATA_PIO5,
+-};
+-
+-/*
+- * If interrupt is delivered through GPIO, IRQ are triggered on falling
+- * and rising edge of signal. Whereas IDE device request interrupt on high
+- * level (rising edge in our case). This mean we have fake interrupts, so
+- * we need to check interrupt pin and exit instantly from ISR when line
+- * is on low level.
+- */
+-
+-irqreturn_t at91_irq_handler(int irq, void *dev_id)
+-{
+-      int ntries = 8;
+-      int pin_val1, pin_val2;
+-
+-      /* additional deglitch, line can be noisy in badly designed PCB */
+-      do {
+-              pin_val1 = at91_get_gpio_value(irq);
+-              pin_val2 = at91_get_gpio_value(irq);
+-      } while (pin_val1 != pin_val2 && --ntries > 0);
+-
+-      if (pin_val1 == 0 || ntries <= 0)
+-              return IRQ_HANDLED;
+-
+-      return ide_intr(irq, dev_id);
+-}
+-
+-static int __init at91_ide_probe(struct platform_device *pdev)
+-{
+-      int ret;
+-      hw_regs_t hw;
+-      hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+-      struct ide_host *host;
+-      struct resource *res;
+-      unsigned long tf_base = 0, ctl_base = 0;
+-      struct at91_cf_data *board = pdev->dev.platform_data;
+-
+-      if (!board)
+-              return -ENODEV;
+-
+-      if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+-              perr("no device detected\n");
+-              return -ENODEV;
+-      }
+-
+-      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-      if (!res) {
+-              perr("can't get memory resource\n");
+-              return -ENODEV;
+-      }
+-
+-      if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+-                                   REGS_SIZE, "ide") ||
+-          !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+-                                   REGS_SIZE, "alt")) {
+-              perr("memory resources in use\n");
+-              return -EBUSY;
+-      }
+-
+-      pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+-           board->irq_pin, (unsigned long) res->start);
+-
+-      tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+-                                             REGS_SIZE);
+-      ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+-                                              REGS_SIZE);
+-      if (!tf_base || !ctl_base) {
+-              perr("can't map memory regions\n");
+-              return -EBUSY;
+-      }
+-
+-      memset(&hw, 0, sizeof(hw));
+-
+-      if (board->flags & AT91_IDE_SWAP_A0_A2) {
+-              /* workaround for stupid hardware bug */
+-              hw.io_ports.data_addr   = tf_base + 0;
+-              hw.io_ports.error_addr  = tf_base + 4;
+-              hw.io_ports.nsect_addr  = tf_base + 2;
+-              hw.io_ports.lbal_addr   = tf_base + 6;
+-              hw.io_ports.lbam_addr   = tf_base + 1;
+-              hw.io_ports.lbah_addr   = tf_base + 5;
+-              hw.io_ports.device_addr = tf_base + 3;
+-              hw.io_ports.command_addr = tf_base + 7;
+-              hw.io_ports.ctl_addr    = ctl_base + 3;
+-      } else
+-              ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+-
+-      hw.irq = board->irq_pin;
+-      hw.chipset = ide_generic;
+-      hw.dev = &pdev->dev;
+-
+-      host = ide_host_alloc(&at91_ide_port_info, hws);
+-      if (!host) {
+-              perr("failed to allocate ide host\n");
+-              return -ENOMEM;
+-      }
+-
+-      /* setup Static Memory Controller - PIO 0 as default */
+-      apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+-
+-      /* with GPIO interrupt we have to do quirks in handler */
+-      if (board->irq_pin >= PIN_BASE)
+-              host->irq_handler = at91_irq_handler;
+-
+-      host->ports[0]->select_data = board->chipselect;
+-
+-      ret = ide_host_register(host, &at91_ide_port_info, hws);
+-      if (ret) {
+-              perr("failed to register ide host\n");
+-              goto err_free_host;
+-      }
+-      platform_set_drvdata(pdev, host);
+-      return 0;
+-
+-err_free_host:
+-      ide_host_free(host);
+-      return ret;
+-}
+-
+-static int __exit at91_ide_remove(struct platform_device *pdev)
+-{
+-      struct ide_host *host = platform_get_drvdata(pdev);
+-
+-      ide_host_remove(host);
+-      return 0;
+-}
+-
+-static struct platform_driver at91_ide_driver = {
+-      .driver = {
+-              .name = DRV_NAME,
+-              .owner = THIS_MODULE,
+-      },
+-      .remove = __exit_p(at91_ide_remove),
+-};
+-
+-static int __init at91_ide_init(void)
+-{
+-      return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+-}
+-
+-static void __exit at91_ide_exit(void)
+-{
+-      platform_driver_unregister(&at91_ide_driver);
+-}
+-
+-module_init(at91_ide_init);
+-module_exit(at91_ide_exit);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+-
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/atiixp.c linux-2.6.29-rc3.owrt/drivers/ide/atiixp.c
+--- linux-2.6.29.owrt/drivers/ide/atiixp.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/atiixp.c 2009-05-10 23:48:28.000000000 +0200
+@@ -52,7 +52,7 @@
+ {
+       struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+       unsigned long flags;
+-      int timing_shift = (drive->dn ^ 1) * 8;
++      int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+       u32 pio_timing_data;
+       u16 pio_mode_data;
+@@ -85,7 +85,7 @@
+ {
+       struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+       unsigned long flags;
+-      int timing_shift = (drive->dn ^ 1) * 8;
++      int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+       u32 tmp32;
+       u16 tmp16;
+       u16 udma_ctl = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/cs5536.c linux-2.6.29-rc3.owrt/drivers/ide/cs5536.c
+--- linux-2.6.29.owrt/drivers/ide/cs5536.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/cs5536.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,308 +0,0 @@
+-/*
+- * CS5536 PATA support
+- * (C) 2007 Martin K. Petersen <mkp@mkp.net>
+- * (C) 2009 Bartlomiej Zolnierkiewicz
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+- *
+- * Documentation:
+- *    Available from AMD web site.
+- *
+- * The IDE timing registers for the CS5536 live in the Geode Machine
+- * Specific Register file and not PCI config space.  Most BIOSes
+- * virtualize the PCI registers so the chip looks like a standard IDE
+- * controller.  Unfortunately not all implementations get this right.
+- * In particular some have problems with unaligned accesses to the
+- * virtualized PCI registers.  This driver always does full dword
+- * writes to work around the issue.  Also, in case of a bad BIOS this
+- * driver can be loaded with the "msr=1" parameter which forces using
+- * the Machine Specific Registers to configure the device.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/pci.h>
+-#include <linux/init.h>
+-#include <linux/ide.h>
+-#include <asm/msr.h>
+-
+-#define DRV_NAME      "cs5536"
+-
+-enum {
+-      MSR_IDE_CFG             = 0x51300010,
+-      PCI_IDE_CFG             = 0x40,
+-
+-      CFG                     = 0,
+-      DTC                     = 2,
+-      CAST                    = 3,
+-      ETC                     = 4,
+-
+-      IDE_CFG_CHANEN          = (1 << 1),
+-      IDE_CFG_CABLE           = (1 << 17) | (1 << 16),
+-
+-      IDE_D0_SHIFT            = 24,
+-      IDE_D1_SHIFT            = 16,
+-      IDE_DRV_MASK            = 0xff,
+-
+-      IDE_CAST_D0_SHIFT       = 6,
+-      IDE_CAST_D1_SHIFT       = 4,
+-      IDE_CAST_DRV_MASK       = 0x3,
+-
+-      IDE_CAST_CMD_SHIFT      = 24,
+-      IDE_CAST_CMD_MASK       = 0xff,
+-
+-      IDE_ETC_UDMA_MASK       = 0xc0,
+-};
+-
+-static int use_msr;
+-
+-static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+-{
+-      if (unlikely(use_msr)) {
+-              u32 dummy;
+-
+-              rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+-              return 0;
+-      }
+-
+-      return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+-}
+-
+-static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+-{
+-      if (unlikely(use_msr)) {
+-              wrmsr(MSR_IDE_CFG + reg, val, 0);
+-              return 0;
+-      }
+-
+-      return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+-}
+-
+-static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
+-{
+-      struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+-      int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+-      u32 dtc;
+-
+-      cs5536_read(pdev, DTC, &dtc);
+-      dtc &= ~(IDE_DRV_MASK << dshift);
+-      dtc |= tim << dshift;
+-      cs5536_write(pdev, DTC, dtc);
+-}
+-
+-/**
+- *    cs5536_cable_detect     -       detect cable type
+- *    @hwif: Port to detect on
+- *
+- *    Perform cable detection for ATA66 capable cable.
+- *
+- *    Returns a cable type.
+- */
+-
+-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+-{
+-      struct pci_dev *pdev = to_pci_dev(hwif->dev);
+-      u32 cfg;
+-
+-      cs5536_read(pdev, CFG, &cfg);
+-
+-      if (cfg & IDE_CFG_CABLE)
+-              return ATA_CBL_PATA80;
+-      else
+-              return ATA_CBL_PATA40;
+-}
+-
+-/**
+- *    cs5536_set_pio_mode             -       PIO timing setup
+- *    @drive: ATA device
+- *    @pio: PIO mode number
+- */
+-
+-static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+-{
+-      static const u8 drv_timings[5] = {
+-              0x98, 0x55, 0x32, 0x21, 0x20,
+-      };
+-
+-      static const u8 addr_timings[5] = {
+-              0x2, 0x1, 0x0, 0x0, 0x0,
+-      };
+-
+-      static const u8 cmd_timings[5] = {
+-              0x99, 0x92, 0x90, 0x22, 0x20,
+-      };
+-
+-      struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+-      ide_drive_t *pair = ide_get_pair_dev(drive);
+-      int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+-      u32 cast;
+-      u8 cmd_pio = pio;
+-
+-      if (pair)
+-              cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+-
+-      drive->drive_data &= (IDE_DRV_MASK << 8);
+-      drive->drive_data |= drv_timings[pio];
+-
+-      cs5536_program_dtc(drive, drv_timings[pio]);
+-
+-      cs5536_read(pdev, CAST, &cast);
+-
+-      cast &= ~(IDE_CAST_DRV_MASK << cshift);
+-      cast |= addr_timings[pio] << cshift;
+-
+-      cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+-      cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
+-
+-      cs5536_write(pdev, CAST, cast);
+-}
+-
+-/**
+- *    cs5536_set_dma_mode             -       DMA timing setup
+- *    @drive: ATA device
+- *    @mode: DMA mode
+- */
+-
+-static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+-{
+-      static const u8 udma_timings[6] = {
+-              0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+-      };
+-
+-      static const u8 mwdma_timings[3] = {
+-              0x67, 0x21, 0x20,
+-      };
+-
+-      struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+-      int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+-      u32 etc;
+-
+-      cs5536_read(pdev, ETC, &etc);
+-
+-      if (mode >= XFER_UDMA_0) {
+-              etc &= ~(IDE_DRV_MASK << dshift);
+-              etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+-      } else { /* MWDMA */
+-              etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+-              drive->drive_data &= IDE_DRV_MASK;
+-              drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+-      }
+-
+-      cs5536_write(pdev, ETC, etc);
+-}
+-
+-static void cs5536_dma_start(ide_drive_t *drive)
+-{
+-      if (drive->current_speed < XFER_UDMA_0 &&
+-          (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+-              cs5536_program_dtc(drive, drive->drive_data >> 8);
+-
+-      ide_dma_start(drive);
+-}
+-
+-static int cs5536_dma_end(ide_drive_t *drive)
+-{
+-      int ret = ide_dma_end(drive);
+-
+-      if (drive->current_speed < XFER_UDMA_0 &&
+-          (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+-              cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+-
+-      return ret;
+-}
+-
+-static const struct ide_port_ops cs5536_port_ops = {
+-      .set_pio_mode           = cs5536_set_pio_mode,
+-      .set_dma_mode           = cs5536_set_dma_mode,
+-      .cable_detect           = cs5536_cable_detect,
+-};
+-
+-static const struct ide_dma_ops cs5536_dma_ops = {
+-      .dma_host_set           = ide_dma_host_set,
+-      .dma_setup              = ide_dma_setup,
+-      .dma_exec_cmd           = ide_dma_exec_cmd,
+-      .dma_start              = cs5536_dma_start,
+-      .dma_end                = cs5536_dma_end,
+-      .dma_test_irq           = ide_dma_test_irq,
+-      .dma_lost_irq           = ide_dma_lost_irq,
+-      .dma_timeout            = ide_dma_timeout,
+-};
+-
+-static const struct ide_port_info cs5536_info = {
+-      .name           = DRV_NAME,
+-      .port_ops       = &cs5536_port_ops,
+-      .dma_ops        = &cs5536_dma_ops,
+-      .host_flags     = IDE_HFLAG_SINGLE,
+-      .pio_mask       = ATA_PIO4,
+-      .mwdma_mask     = ATA_MWDMA2,
+-      .udma_mask      = ATA_UDMA5,
+-};
+-
+-/**
+- *    cs5536_init_one
+- *    @dev: PCI device
+- *    @id: Entry in match table
+- */
+-
+-static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+-{
+-      u32 cfg;
+-
+-      if (use_msr)
+-              printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
+-
+-      cs5536_read(dev, CFG, &cfg);
+-
+-      if ((cfg & IDE_CFG_CHANEN) == 0) {
+-              printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+-              return -ENODEV;
+-      }
+-
+-      return ide_pci_init_one(dev, &cs5536_info, NULL);
+-}
+-
+-static const struct pci_device_id cs5536_pci_tbl[] = {
+-      { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
+-      { },
+-};
+-
+-static struct pci_driver cs5536_pci_driver = {
+-      .name           = DRV_NAME,
+-      .id_table       = cs5536_pci_tbl,
+-      .probe          = cs5536_init_one,
+-      .remove         = ide_pci_remove,
+-      .suspend        = ide_pci_suspend,
+-      .resume         = ide_pci_resume,
+-};
+-
+-static int __init cs5536_init(void)
+-{
+-      return pci_register_driver(&cs5536_pci_driver);
+-}
+-
+-static void __exit cs5536_exit(void)
+-{
+-      pci_unregister_driver(&cs5536_pci_driver);
+-}
+-
+-MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
+-MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+-MODULE_LICENSE("GPL");
+-MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
+-
+-module_param_named(msr, use_msr, int, 0644);
+-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+-
+-module_init(cs5536_init);
+-module_exit(cs5536_exit);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/icside.c linux-2.6.29-rc3.owrt/drivers/ide/icside.c
+--- linux-2.6.29.owrt/drivers/ide/icside.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/icside.c 2009-05-10 23:48:28.000000000 +0200
+@@ -534,7 +534,7 @@
+               d.dma_ops = NULL;
+       }
+-      ret = ide_host_register(host, &d, hws);
++      ret = ide_host_register(host, NULL, hws);
+       if (ret)
+               goto err_free;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-acpi.c linux-2.6.29-rc3.owrt/drivers/ide/ide-acpi.c
+--- linux-2.6.29.owrt/drivers/ide/ide-acpi.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-acpi.c       2009-05-10 23:48:28.000000000 +0200
+@@ -282,7 +282,7 @@
+       port = hwif->channel ? drive->dn - 2: drive->dn;
+       DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
+-               hwif->name, dev_name(dev), port, hwif->channel);
++               hwif->name, dev->bus_id, port, hwif->channel);
+       if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
+               DEBPRINT("%s drive %d:%d not present\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-atapi.c linux-2.6.29-rc3.owrt/drivers/ide/ide-atapi.c
+--- linux-2.6.29.owrt/drivers/ide/ide-atapi.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-atapi.c      2009-05-10 23:48:28.000000000 +0200
+@@ -140,12 +140,6 @@
+       rq->cmd_flags |= REQ_PREEMPT;
+       rq->buffer = (char *)pc;
+       rq->rq_disk = disk;
+-
+-      if (pc->req_xfer) {
+-              rq->data = pc->buf;
+-              rq->data_len = pc->req_xfer;
+-      }
+-
+       memcpy(rq->cmd, pc->c, 12);
+       if (drive->media == ide_tape)
+               rq->cmd[13] = REQ_IDETAPE_PC1;
+@@ -165,12 +159,6 @@
+       rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+       rq->cmd_type = REQ_TYPE_SPECIAL;
+       rq->buffer = (char *)pc;
+-
+-      if (pc->req_xfer) {
+-              rq->data = pc->buf;
+-              rq->data_len = pc->req_xfer;
+-      }
+-
+       memcpy(rq->cmd, pc->c, 12);
+       if (drive->media == ide_tape)
+               rq->cmd[13] = REQ_IDETAPE_PC1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide.c linux-2.6.29-rc3.owrt/drivers/ide/ide.c
+--- linux-2.6.29.owrt/drivers/ide/ide.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide.c    2009-05-10 23:48:28.000000000 +0200
+@@ -337,7 +337,6 @@
+       int a, b, i, j = 1;
+       unsigned int *dev_param_mask = (unsigned int *)kp->arg;
+-      /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
+       if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
+           sscanf(s, "%d.%d", &a, &b) != 2)
+               return -EINVAL;
+@@ -350,7 +349,7 @@
+       if (j)
+               *dev_param_mask |= (1 << i);
+       else
+-              *dev_param_mask &= ~(1 << i);
++              *dev_param_mask &= (1 << i);
+       return 0;
+ }
+@@ -393,8 +392,6 @@
+ {
+       int a, b, c = 0, h = 0, s = 0, i, j = 1;
+-      /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
+-      /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
+       if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
+           sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
+               return -EINVAL;
+@@ -410,7 +407,7 @@
+       if (j)
+               ide_disks |= (1 << i);
+       else
+-              ide_disks &= ~(1 << i);
++              ide_disks &= (1 << i);
+       ide_disks_chs[i].cyl  = c;
+       ide_disks_chs[i].head = h;
+@@ -472,8 +469,6 @@
+ {
+       int i, j = 1;
+-      /* controller (ignore) */
+-      /* controller : 1 (ignore) | 0 (use) */
+       if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
+               return -EINVAL;
+@@ -483,7 +478,7 @@
+       if (j)
+               ide_ignore_cable |= (1 << i);
+       else
+-              ide_ignore_cable &= ~(1 << i);
++              ide_ignore_cable &= (1 << i);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-cd.c linux-2.6.29-rc3.owrt/drivers/ide/ide-cd.c
+--- linux-2.6.29.owrt/drivers/ide/ide-cd.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-cd.c 2009-05-10 23:48:28.000000000 +0200
+@@ -55,7 +55,7 @@
+ static DEFINE_MUTEX(idecd_ref_mutex);
+-static void ide_cd_release(struct device *);
++static void ide_cd_release(struct kref *);
+ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
+ {
+@@ -67,7 +67,7 @@
+               if (ide_device_get(cd->drive))
+                       cd = NULL;
+               else
+-                      get_device(&cd->dev);
++                      kref_get(&cd->kref);
+       }
+       mutex_unlock(&idecd_ref_mutex);
+@@ -79,7 +79,7 @@
+       ide_drive_t *drive = cd->drive;
+       mutex_lock(&idecd_ref_mutex);
+-      put_device(&cd->dev);
++      kref_put(&cd->kref, ide_cd_release);
+       ide_device_put(drive);
+       mutex_unlock(&idecd_ref_mutex);
+ }
+@@ -194,14 +194,6 @@
+                       bio_sectors = max(bio_sectors(failed_command->bio), 4U);
+                       sector &= ~(bio_sectors - 1);
+-                      /*
+-                       * The SCSI specification allows for the value
+-                       * returned by READ CAPACITY to be up to 75 2K
+-                       * sectors past the last readable block.
+-                       * Therefore, if we hit a medium error within the
+-                       * last 75 2K sectors, we decrease the saved size
+-                       * value.
+-                       */
+                       if (sector < get_capacity(info->disk) &&
+                           drive->probed_capacity - sector < 4 * 75)
+                               set_capacity(info->disk, sector);
+@@ -795,9 +787,6 @@
+               if (blk_fs_request(rq)) {
+                       ide_end_request(drive, 1, rq->nr_sectors);
+                       return ide_stopped;
+-              } else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) {
+-                      ide_end_request(drive, 1, 1);
+-                      return ide_stopped;
+               }
+               goto end_request;
+       }
+@@ -1798,17 +1787,15 @@
+       ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+       ide_proc_unregister_driver(drive, info->driver);
+-      device_del(&info->dev);
++
+       del_gendisk(info->disk);
+-      mutex_lock(&idecd_ref_mutex);
+-      put_device(&info->dev);
+-      mutex_unlock(&idecd_ref_mutex);
++      ide_cd_put(info);
+ }
+-static void ide_cd_release(struct device *dev)
++static void ide_cd_release(struct kref *kref)
+ {
+-      struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
++      struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
+       struct cdrom_device_info *devinfo = &info->devinfo;
+       ide_drive_t *drive = info->drive;
+       struct gendisk *g = info->disk;
+@@ -2007,12 +1994,7 @@
+       ide_init_disk(g, drive);
+-      info->dev.parent = &drive->gendev;
+-      info->dev.release = ide_cd_release;
+-      dev_set_name(&info->dev, dev_name(&drive->gendev));
+-
+-      if (device_register(&info->dev))
+-              goto out_free_disk;
++      kref_init(&info->kref);
+       info->drive = drive;
+       info->driver = &ide_cdrom_driver;
+@@ -2026,7 +2008,7 @@
+       g->driverfs_dev = &drive->gendev;
+       g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
+       if (ide_cdrom_setup(drive)) {
+-              put_device(&info->dev);
++              ide_cd_release(&info->kref);
+               goto failed;
+       }
+@@ -2036,8 +2018,6 @@
+       add_disk(g);
+       return 0;
+-out_free_disk:
+-      put_disk(g);
+ out_free_cd:
+       kfree(info);
+ failed:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-cd.h linux-2.6.29-rc3.owrt/drivers/ide/ide-cd.h
+--- linux-2.6.29.owrt/drivers/ide/ide-cd.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-cd.h 2009-05-10 23:48:28.000000000 +0200
+@@ -80,7 +80,7 @@
+       ide_drive_t             *drive;
+       struct ide_driver       *driver;
+       struct gendisk          *disk;
+-      struct device           dev;
++      struct kref             kref;
+       /* Buffer for table of contents.  NULL if we haven't allocated
+          a TOC buffer for this device yet. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-disk_proc.c linux-2.6.29-rc3.owrt/drivers/ide/ide-disk_proc.c
+--- linux-2.6.29.owrt/drivers/ide/ide-disk_proc.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-disk_proc.c  2009-05-10 23:48:28.000000000 +0200
+@@ -125,5 +125,5 @@
+       IDE_PROC_DEVSET(multcount,      0,    16),
+       IDE_PROC_DEVSET(nowerr,         0,     1),
+       IDE_PROC_DEVSET(wcache,         0,     1),
+-      { NULL },
++      { 0 },
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-dma.c linux-2.6.29-rc3.owrt/drivers/ide/ide-dma.c
+--- linux-2.6.29.owrt/drivers/ide/ide-dma.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-dma.c        2009-05-10 23:48:28.000000000 +0200
+@@ -128,7 +128,6 @@
+ {
+       ide_hwif_t *hwif = drive->hwif;
+       struct scatterlist *sg = hwif->sg_table;
+-      int i;
+       ide_map_sg(drive, rq);
+@@ -137,13 +136,8 @@
+       else
+               hwif->sg_dma_direction = DMA_TO_DEVICE;
+-      i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+-      if (i) {
+-              hwif->orig_sg_nents = hwif->sg_nents;
+-              hwif->sg_nents = i;
+-      }
+-
+-      return i;
++      return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
++                        hwif->sg_dma_direction);
+ }
+ EXPORT_SYMBOL_GPL(ide_build_sglist);
+@@ -162,7 +156,7 @@
+ {
+       ide_hwif_t *hwif = drive->hwif;
+-      dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
++      dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+                    hwif->sg_dma_direction);
+ }
+ EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-floppy.c linux-2.6.29-rc3.owrt/drivers/ide/ide-floppy.c
+--- linux-2.6.29.owrt/drivers/ide/ide-floppy.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-floppy.c     2009-05-10 23:48:28.000000000 +0200
+@@ -327,10 +327,8 @@
+               return ide_stopped;
+       }
+-      if (blk_fs_request(rq) || pc->req_xfer) {
+-              ide_init_sg_cmd(drive, rq);
+-              ide_map_sg(drive, rq);
+-      }
++      ide_init_sg_cmd(drive, rq);
++      ide_map_sg(drive, rq);
+       pc->sg = hwif->sg_table;
+       pc->sg_cnt = hwif->sg_nents;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-floppy_proc.c linux-2.6.29-rc3.owrt/drivers/ide/ide-floppy_proc.c
+--- linux-2.6.29.owrt/drivers/ide/ide-floppy_proc.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-floppy_proc.c        2009-05-10 23:48:28.000000000 +0200
+@@ -29,5 +29,5 @@
+       IDE_PROC_DEVSET(bios_head, 0,  255),
+       IDE_PROC_DEVSET(bios_sect, 0,   63),
+       IDE_PROC_DEVSET(ticks,     0,  255),
+-      { NULL },
++      { 0 },
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-gd.c linux-2.6.29-rc3.owrt/drivers/ide/ide-gd.c
+--- linux-2.6.29.owrt/drivers/ide/ide-gd.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-gd.c 2009-05-10 23:48:28.000000000 +0200
+@@ -25,7 +25,7 @@
+ static DEFINE_MUTEX(ide_disk_ref_mutex);
+-static void ide_disk_release(struct device *);
++static void ide_disk_release(struct kref *);
+ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
+ {
+@@ -37,7 +37,7 @@
+               if (ide_device_get(idkp->drive))
+                       idkp = NULL;
+               else
+-                      get_device(&idkp->dev);
++                      kref_get(&idkp->kref);
+       }
+       mutex_unlock(&ide_disk_ref_mutex);
+       return idkp;
+@@ -48,7 +48,7 @@
+       ide_drive_t *drive = idkp->drive;
+       mutex_lock(&ide_disk_ref_mutex);
+-      put_device(&idkp->dev);
++      kref_put(&idkp->kref, ide_disk_release);
+       ide_device_put(drive);
+       mutex_unlock(&ide_disk_ref_mutex);
+ }
+@@ -66,18 +66,17 @@
+       struct gendisk *g = idkp->disk;
+       ide_proc_unregister_driver(drive, idkp->driver);
+-      device_del(&idkp->dev);
++
+       del_gendisk(g);
++
+       drive->disk_ops->flush(drive);
+-      mutex_lock(&ide_disk_ref_mutex);
+-      put_device(&idkp->dev);
+-      mutex_unlock(&ide_disk_ref_mutex);
++      ide_disk_put(idkp);
+ }
+-static void ide_disk_release(struct device *dev)
++static void ide_disk_release(struct kref *kref)
+ {
+-      struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
++      struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+       ide_drive_t *drive = idkp->drive;
+       struct gendisk *g = idkp->disk;
+@@ -349,12 +348,7 @@
+       ide_init_disk(g, drive);
+-      idkp->dev.parent = &drive->gendev;
+-      idkp->dev.release = ide_disk_release;
+-      dev_set_name(&idkp->dev, dev_name(&drive->gendev));
+-
+-      if (device_register(&idkp->dev))
+-              goto out_free_disk;
++      kref_init(&idkp->kref);
+       idkp->drive = drive;
+       idkp->driver = &ide_gd_driver;
+@@ -379,8 +373,6 @@
+       add_disk(g);
+       return 0;
+-out_free_disk:
+-      put_disk(g);
+ out_free_idkp:
+       kfree(idkp);
+ failed:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-gd.h linux-2.6.29-rc3.owrt/drivers/ide/ide-gd.h
+--- linux-2.6.29.owrt/drivers/ide/ide-gd.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-gd.h 2009-05-10 23:48:28.000000000 +0200
+@@ -17,7 +17,7 @@
+       ide_drive_t             *drive;
+       struct ide_driver       *driver;
+       struct gendisk          *disk;
+-      struct device           dev;
++      struct kref             kref;
+       unsigned int            openers;        /* protected by BKL for now */
+       /* Last failed packet command */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-io.c linux-2.6.29-rc3.owrt/drivers/ide/ide-io.c
+--- linux-2.6.29.owrt/drivers/ide/ide-io.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-io.c 2009-05-10 23:48:28.000000000 +0200
+@@ -418,14 +418,11 @@
+       ide_hwif_t *hwif = drive->hwif;
+       struct scatterlist *sg = hwif->sg_table;
+-      if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
++      if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
++              hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
++      } else {
+               sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
+               hwif->sg_nents = 1;
+-      } else if (!rq->bio) {
+-              sg_init_one(sg, rq->data, rq->data_len);
+-              hwif->sg_nents = 1;
+-      } else {
+-              hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
+       }
+ }
+@@ -908,7 +905,7 @@
+       ide_drive_t     *uninitialized_var(drive);
+       ide_handler_t   *handler;
+       unsigned long   flags;
+-      int             wait = -1;
++      unsigned long   wait = -1;
+       int             plug_device = 0;
+       spin_lock_irqsave(&hwif->lock, flags);
+@@ -1162,7 +1159,6 @@
+       return irq_ret;
+ }
+-EXPORT_SYMBOL_GPL(ide_intr);
+ /**
+  *    ide_do_drive_cmd        -       issue IDE special command
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-iops.c linux-2.6.29-rc3.owrt/drivers/ide/ide-iops.c
+--- linux-2.6.29.owrt/drivers/ide/ide-iops.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-iops.c       2009-05-10 23:48:28.000000000 +0200
+@@ -315,8 +315,6 @@
+       u8 io_32bit = drive->io_32bit;
+       u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+-      len++;
+-
+       if (io_32bit) {
+               unsigned long uninitialized_var(flags);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-probe.c linux-2.6.29-rc3.owrt/drivers/ide/ide-probe.c
+--- linux-2.6.29.owrt/drivers/ide/ide-probe.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-probe.c      2009-05-10 23:48:28.000000000 +0200
+@@ -950,7 +950,6 @@
+ static int init_irq (ide_hwif_t *hwif)
+ {
+       struct ide_io_ports *io_ports = &hwif->io_ports;
+-      irq_handler_t irq_handler;
+       int sa = 0;
+       mutex_lock(&ide_cfg_mtx);
+@@ -960,10 +959,6 @@
+       hwif->timer.function = &ide_timer_expiry;
+       hwif->timer.data = (unsigned long)hwif;
+-      irq_handler = hwif->host->irq_handler;
+-      if (irq_handler == NULL)
+-              irq_handler = ide_intr;
+-
+ #if defined(__mc68000__)
+       sa = IRQF_SHARED;
+ #endif /* __mc68000__ */
+@@ -974,7 +969,7 @@
+       if (io_ports->ctl_addr)
+               hwif->tp_ops->set_irq(hwif, 1);
+-      if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
++      if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+               goto out_up;
+       if (!hwif->rqsize) {
+@@ -1472,30 +1467,6 @@
+ }
+ EXPORT_SYMBOL_GPL(ide_host_alloc);
+-static void ide_port_free(ide_hwif_t *hwif)
+-{
+-      ide_port_free_devices(hwif);
+-      ide_free_port_slot(hwif->index);
+-      kfree(hwif);
+-}
+-
+-static void ide_disable_port(ide_hwif_t *hwif)
+-{
+-      struct ide_host *host = hwif->host;
+-      int i;
+-
+-      printk(KERN_INFO "%s: disabling port\n", hwif->name);
+-
+-      for (i = 0; i < MAX_HOST_PORTS; i++) {
+-              if (host->ports[i] == hwif) {
+-                      host->ports[i] = NULL;
+-                      host->n_ports--;
+-              }
+-      }
+-
+-      ide_port_free(hwif);
+-}
+-
+ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
+                     hw_regs_t **hws)
+ {
+@@ -1536,12 +1507,8 @@
+                       hwif->present = 1;
+               if (hwif->chipset != ide_4drives || !hwif->mate ||
+-                  !hwif->mate->present) {
+-                      if (ide_register_port(hwif)) {
+-                              ide_disable_port(hwif);
+-                              continue;
+-                      }
+-              }
++                  !hwif->mate->present)
++                      ide_register_port(hwif);
+               if (hwif->present)
+                       ide_port_tune_devices(hwif);
+@@ -1554,8 +1521,7 @@
+               if (hwif_init(hwif) == 0) {
+                       printk(KERN_INFO "%s: failed to initialize IDE "
+                                        "interface\n", hwif->name);
+-                      device_unregister(&hwif->gendev);
+-                      ide_disable_port(hwif);
++                      hwif->present = 0;
+                       continue;
+               }
+@@ -1694,8 +1660,12 @@
+       int i;
+       ide_host_for_each_port(i, hwif, host) {
+-              if (hwif)
+-                      ide_port_free(hwif);
++              if (hwif == NULL)
++                      continue;
++
++              ide_port_free_devices(hwif);
++              ide_free_port_slot(hwif->index);
++              kfree(hwif);
+       }
+       kfree(host);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-proc.c linux-2.6.29-rc3.owrt/drivers/ide/ide-proc.c
+--- linux-2.6.29.owrt/drivers/ide/ide-proc.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-proc.c       2009-05-10 23:48:28.000000000 +0200
+@@ -231,7 +231,7 @@
+       IDE_PROC_DEVSET(pio_mode, 0, 255),
+       IDE_PROC_DEVSET(unmaskirq, 0, 1),
+       IDE_PROC_DEVSET(using_dma, 0, 1),
+-      { NULL },
++      { 0 },
+ };
+ static void proc_ide_settings_warn(void)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/ide-tape.c linux-2.6.29-rc3.owrt/drivers/ide/ide-tape.c
+--- linux-2.6.29.owrt/drivers/ide/ide-tape.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/ide-tape.c       2009-05-10 23:48:28.000000000 +0200
+@@ -169,7 +169,7 @@
+       ide_drive_t             *drive;
+       struct ide_driver       *driver;
+       struct gendisk          *disk;
+-      struct device           dev;
++      struct kref             kref;
+       /*
+        *      failed_pc points to the last failed packet command, or contains
+@@ -267,7 +267,7 @@
+ static struct class *idetape_sysfs_class;
+-static void ide_tape_release(struct device *);
++static void ide_tape_release(struct kref *);
+ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
+ {
+@@ -279,7 +279,7 @@
+               if (ide_device_get(tape->drive))
+                       tape = NULL;
+               else
+-                      get_device(&tape->dev);
++                      kref_get(&tape->kref);
+       }
+       mutex_unlock(&idetape_ref_mutex);
+       return tape;
+@@ -290,7 +290,7 @@
+       ide_drive_t *drive = tape->drive;
+       mutex_lock(&idetape_ref_mutex);
+-      put_device(&tape->dev);
++      kref_put(&tape->kref, ide_tape_release);
+       ide_device_put(drive);
+       mutex_unlock(&idetape_ref_mutex);
+ }
+@@ -308,7 +308,7 @@
+       mutex_lock(&idetape_ref_mutex);
+       tape = idetape_devs[i];
+       if (tape)
+-              get_device(&tape->dev);
++              kref_get(&tape->kref);
+       mutex_unlock(&idetape_ref_mutex);
+       return tape;
+ }
+@@ -2166,7 +2166,7 @@
+       __IDE_PROC_DEVSET(speed,        0, 0xffff, NULL, NULL),
+       __IDE_PROC_DEVSET(tdsc,         IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+                                       mulf_tdsc, divf_tdsc),
+-      { NULL },
++      { 0 },
+ };
+ #endif
+@@ -2256,17 +2256,15 @@
+       idetape_tape_t *tape = drive->driver_data;
+       ide_proc_unregister_driver(drive, tape->driver);
+-      device_del(&tape->dev);
++
+       ide_unregister_region(tape->disk);
+-      mutex_lock(&idetape_ref_mutex);
+-      put_device(&tape->dev);
+-      mutex_unlock(&idetape_ref_mutex);
++      ide_tape_put(tape);
+ }
+-static void ide_tape_release(struct device *dev)
++static void ide_tape_release(struct kref *kref)
+ {
+-      struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
++      struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
+       ide_drive_t *drive = tape->drive;
+       struct gendisk *g = tape->disk;
+@@ -2409,12 +2407,7 @@
+       ide_init_disk(g, drive);
+-      tape->dev.parent = &drive->gendev;
+-      tape->dev.release = ide_tape_release;
+-      dev_set_name(&tape->dev, dev_name(&drive->gendev));
+-
+-      if (device_register(&tape->dev))
+-              goto out_free_disk;
++      kref_init(&tape->kref);
+       tape->drive = drive;
+       tape->driver = &idetape_driver;
+@@ -2443,8 +2436,6 @@
+       return 0;
+-out_free_disk:
+-      put_disk(g);
+ out_free_tape:
+       kfree(tape);
+ failed:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/it821x.c linux-2.6.29-rc3.owrt/drivers/ide/it821x.c
+--- linux-2.6.29.owrt/drivers/ide/it821x.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/it821x.c 2009-05-10 23:48:28.000000000 +0200
+@@ -5,8 +5,9 @@
+  *  May be copied or modified under the terms of the GNU General Public License
+  *  Based in part on the ITE vendor provided SCSI driver.
+  *
+- *  Documentation:
+- *    Datasheet is freely available, some other documents under NDA.
++ *  Documentation available from
++ *    http://www.ite.com.tw/pc/IT8212F_V04.pdf
++ *  Some other documents are NDA.
+  *
+  *  The ITE8212 isn't exactly a standard IDE controller. It has two
+  *  modes. In pass through mode then it is an IDE controller. In its smart
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/Kconfig linux-2.6.29-rc3.owrt/drivers/ide/Kconfig
+--- linux-2.6.29.owrt/drivers/ide/Kconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -46,7 +46,7 @@
+         SMART parameters from disk drives.
+         To compile this driver as a module, choose M here: the
+-        module will be called ide-core.ko.
++        module will be called ide.
+         For further information, please read <file:Documentation/ide/ide.txt>.
+@@ -465,16 +465,6 @@
+         It is safe to say Y to this question.
+-config BLK_DEV_CS5536
+-      tristate "CS5536 chipset support"
+-      depends on X86_32
+-      select BLK_DEV_IDEDMA_PCI
+-      help
+-        This option enables support for the AMD CS5536
+-        companion chip used with the Geode LX processor family.
+-
+-        If unsure, say N.
+-
+ config BLK_DEV_HPT366
+       tristate "HPT36X/37X chipset support"
+       select BLK_DEV_IDEDMA_PCI
+@@ -721,11 +711,6 @@
+       depends on SOC_TX4939
+       select BLK_DEV_IDEDMA_SFF
+-config BLK_DEV_IDE_AT91
+-      tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+-      depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+-      select IDE_TIMINGS
+-
+ config IDE_ARM
+       tristate "ARM IDE support"
+       depends on ARM && (ARCH_RPC || ARCH_SHARK)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/Makefile linux-2.6.29-rc3.owrt/drivers/ide/Makefile
+--- linux-2.6.29.owrt/drivers/ide/Makefile     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/Makefile 2009-05-10 23:48:28.000000000 +0200
+@@ -43,7 +43,6 @@
+ obj-$(CONFIG_BLK_DEV_CS5520)          += cs5520.o
+ obj-$(CONFIG_BLK_DEV_CS5530)          += cs5530.o
+ obj-$(CONFIG_BLK_DEV_CS5535)          += cs5535.o
+-obj-$(CONFIG_BLK_DEV_CS5536)          += cs5536.o
+ obj-$(CONFIG_BLK_DEV_SC1200)          += sc1200.o
+ obj-$(CONFIG_BLK_DEV_CY82C693)                += cy82c693.o
+ obj-$(CONFIG_BLK_DEV_DELKIN)          += delkin_cb.o
+@@ -116,4 +115,3 @@
+ obj-$(CONFIG_BLK_DEV_IDE_TX4938)      += tx4938ide.o
+ obj-$(CONFIG_BLK_DEV_IDE_TX4939)      += tx4939ide.o
+-obj-$(CONFIG_BLK_DEV_IDE_AT91)                += at91_ide.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/qd65xx.c linux-2.6.29-rc3.owrt/drivers/ide/qd65xx.c
+--- linux-2.6.29.owrt/drivers/ide/qd65xx.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/qd65xx.c 2009-05-10 23:48:28.000000000 +0200
+@@ -16,7 +16,7 @@
+ /*
+  * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+- * Samuel Thibault <samuel.thibault@ens-lyon.org>
++ * Samuel Thibault <samuel.thibault@fnac.net>
+  */
+ #include <linux/module.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/qd65xx.h linux-2.6.29-rc3.owrt/drivers/ide/qd65xx.h
+--- linux-2.6.29.owrt/drivers/ide/qd65xx.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/qd65xx.h 2009-05-10 23:48:28.000000000 +0200
+@@ -4,7 +4,7 @@
+ /*
+  * Authors:   Petr Soucek <petr@ryston.cz>
+- *            Samuel Thibault <samuel.thibault@ens-lyon.org>
++ *            Samuel Thibault <samuel.thibault@fnac.net>
+  */
+ /* truncates a in [b,c] */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/tx4939ide.c linux-2.6.29-rc3.owrt/drivers/ide/tx4939ide.c
+--- linux-2.6.29.owrt/drivers/ide/tx4939ide.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/tx4939ide.c      2009-05-10 23:48:28.000000000 +0200
+@@ -261,9 +261,9 @@
+                               bcount = cur_len;
+                       /*
+                        * This workaround for zero count seems required.
+-                       * (standard ide_build_dmatable does it too)
++                       * (standard ide_build_dmatable do it too)
+                        */
+-                      if (bcount == 0x10000)
++                      if ((bcount & 0xffff) == 0x0000)
+                               bcount = 0x8000;
+                       *table++ = bcount & 0xffff;
+                       *table++ = cur_addr;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ide/via82cxxx.c linux-2.6.29-rc3.owrt/drivers/ide/via82cxxx.c
+--- linux-2.6.29.owrt/drivers/ide/via82cxxx.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ide/via82cxxx.c      2009-05-10 23:48:28.000000000 +0200
+@@ -448,11 +448,6 @@
+               d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+ #endif
+-#ifdef CONFIG_AMIGAONE
+-      if (machine_is(amigaone))
+-              d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+-#endif
+-
+       d.udma_mask = via_config->udma_mask;
+       vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/dma.h linux-2.6.29-rc3.owrt/drivers/ieee1394/dma.h
+--- linux-2.6.29.owrt/drivers/ieee1394/dma.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/dma.h       2009-05-10 23:48:28.000000000 +0200
+@@ -12,7 +12,6 @@
+ #include <asm/types.h>
+-struct file;
+ struct pci_dev;
+ struct scatterlist;
+ struct vm_area_struct;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/dv1394.c linux-2.6.29-rc3.owrt/drivers/ieee1394/dv1394.c
+--- linux-2.6.29.owrt/drivers/ieee1394/dv1394.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/dv1394.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1823,10 +1823,6 @@
+ #endif
+-      printk(KERN_INFO "%s: NOTE, the dv1394 interface is unsupported "
+-             "and will not be available in the new firewire driver stack. "
+-             "Try libraw1394 based programs instead.\n", current->comm);
+-
+       return 0;
+ }
+@@ -2571,6 +2567,10 @@
+ {
+       int ret;
++      printk(KERN_WARNING
++             "NOTE: The dv1394 driver is unsupported and may be removed in a "
++             "future Linux release. Use raw1394 instead.\n");
++
+       cdev_init(&dv1394_cdev, &dv1394_fops);
+       dv1394_cdev.owner = THIS_MODULE;
+       ret = cdev_add(&dv1394_cdev, IEEE1394_DV1394_DEV, 16);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/ieee1394_core.c linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_core.c
+--- linux-2.6.29.owrt/drivers/ieee1394/ieee1394_core.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_core.c     2009-05-10 23:48:28.000000000 +0200
+@@ -338,7 +338,6 @@
+       u8 cldcnt[nodecount];
+       u8 *map = host->speed_map;
+       u8 *speedcap = host->speed;
+-      u8 local_link_speed = host->csr.lnk_spd;
+       struct selfid *sid;
+       struct ext_selfid *esid;
+       int i, j, n;
+@@ -374,8 +373,8 @@
+                       if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++;
+                       speedcap[n] = sid->speed;
+-                      if (speedcap[n] > local_link_speed)
+-                              speedcap[n] = local_link_speed;
++                      if (speedcap[n] > host->csr.lnk_spd)
++                              speedcap[n] = host->csr.lnk_spd;
+                       n--;
+               }
+       }
+@@ -408,11 +407,12 @@
+               }
+       }
+-      /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */
+-      if (local_link_speed > SELFID_SPEED_UNKNOWN)
+-              for (i = 0; i < nodecount; i++)
+-                      if (speedcap[i] == SELFID_SPEED_UNKNOWN)
+-                              speedcap[i] = local_link_speed;
++#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
++      /* assume maximum speed for 1394b PHYs, nodemgr will correct it */
++      for (n = 0; n < nodecount; n++)
++              if (speedcap[n] == SELFID_SPEED_UNKNOWN)
++                      speedcap[n] = IEEE1394_SPEED_MAX;
++#endif
+ }
+@@ -1275,7 +1275,7 @@
+       unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
+ }
+-fs_initcall(ieee1394_init);
++module_init(ieee1394_init);
+ module_exit(ieee1394_cleanup);
+ /* Exported symbols */
+@@ -1314,7 +1314,6 @@
+ EXPORT_SYMBOL(hpsb_make_phypacket);
+ EXPORT_SYMBOL(hpsb_read);
+ EXPORT_SYMBOL(hpsb_write);
+-EXPORT_SYMBOL(hpsb_lock);
+ EXPORT_SYMBOL(hpsb_packet_success);
+ /** highlevel.c **/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/ieee1394.h linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394.h
+--- linux-2.6.29.owrt/drivers/ieee1394/ieee1394.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394.h  2009-05-10 23:48:28.000000000 +0200
+@@ -54,7 +54,9 @@
+ #define IEEE1394_SPEED_800    0x03
+ #define IEEE1394_SPEED_1600   0x04
+ #define IEEE1394_SPEED_3200   0x05
+-#define IEEE1394_SPEED_MAX    IEEE1394_SPEED_3200
++
++/* The current highest tested speed supported by the subsystem */
++#define IEEE1394_SPEED_MAX    IEEE1394_SPEED_800
+ /* Maps speed values above to a string representation */
+ extern const char *hpsb_speedto_str[];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/ieee1394_transactions.c linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_transactions.c
+--- linux-2.6.29.owrt/drivers/ieee1394/ieee1394_transactions.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_transactions.c     2009-05-10 23:48:28.000000000 +0200
+@@ -501,6 +501,8 @@
+       if (length == 0)
+               return -EINVAL;
++      BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
++
+       packet = hpsb_make_readpacket(host, node, addr, length);
+       if (!packet) {
+@@ -548,6 +550,8 @@
+       if (length == 0)
+               return -EINVAL;
++      BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
++
+       packet = hpsb_make_writepacket(host, node, addr, buffer, length);
+       if (!packet)
+@@ -566,30 +570,3 @@
+       return retval;
+ }
+-
+-int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+-            u64 addr, int extcode, quadlet_t *data, quadlet_t arg)
+-{
+-      struct hpsb_packet *packet;
+-      int retval = 0;
+-
+-      packet = hpsb_make_lockpacket(host, node, addr, extcode, data, arg);
+-      if (!packet)
+-              return -ENOMEM;
+-
+-      packet->generation = generation;
+-      retval = hpsb_send_packet_and_wait(packet);
+-      if (retval < 0)
+-              goto hpsb_lock_fail;
+-
+-      retval = hpsb_packet_success(packet);
+-
+-      if (retval == 0)
+-              *data = packet->data[0];
+-
+-hpsb_lock_fail:
+-      hpsb_free_tlabel(packet);
+-      hpsb_free_packet(packet);
+-
+-      return retval;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/ieee1394_transactions.h linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_transactions.h
+--- linux-2.6.29.owrt/drivers/ieee1394/ieee1394_transactions.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/ieee1394_transactions.h     2009-05-10 23:48:28.000000000 +0200
+@@ -30,8 +30,6 @@
+             u64 addr, quadlet_t *buffer, size_t length);
+ int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+              u64 addr, quadlet_t *buffer, size_t length);
+-int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+-            u64 addr, int extcode, quadlet_t *data, quadlet_t arg);
+ #ifdef HPSB_DEBUG_TLABELS
+ extern spinlock_t hpsb_tlabel_lock;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/iso.h linux-2.6.29-rc3.owrt/drivers/ieee1394/iso.h
+--- linux-2.6.29.owrt/drivers/ieee1394/iso.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/iso.h       2009-05-10 23:48:28.000000000 +0200
+@@ -13,7 +13,6 @@
+ #define IEEE1394_ISO_H
+ #include <linux/spinlock_types.h>
+-#include <linux/wait.h>
+ #include <asm/atomic.h>
+ #include <asm/types.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/nodemgr.c linux-2.6.29-rc3.owrt/drivers/ieee1394/nodemgr.c
+--- linux-2.6.29.owrt/drivers/ieee1394/nodemgr.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/nodemgr.c   2009-05-10 23:48:28.000000000 +0200
+@@ -971,9 +971,6 @@
+       ud->ud_kv = ud_kv;
+       ud->id = (*id)++;
+-      /* inherit vendor_id from root directory if none exists in unit dir */
+-      ud->vendor_id = ne->vendor_id;
+-
+       csr1212_for_each_dir_entry(ne->csr, kv, ud_kv, dentry) {
+               switch (kv->key.id) {
+               case CSR1212_KV_ID_VENDOR:
+@@ -1268,8 +1265,7 @@
+               csr1212_destroy_csr(csr);
+       }
+-      /* Finally, mark the node current */
+-      smp_wmb();
++      /* Mark the node current */
+       ne->generation = generation;
+       if (ne->in_limbo) {
+@@ -1802,7 +1798,7 @@
+ {
+       packet->host = ne->host;
+       packet->generation = ne->generation;
+-      smp_rmb();
++      barrier();
+       packet->node_id = ne->nodeid;
+ }
+@@ -1811,7 +1807,7 @@
+ {
+       unsigned int generation = ne->generation;
+-      smp_rmb();
++      barrier();
+       return hpsb_write(ne->host, ne->nodeid, generation,
+                         addr, buffer, length);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/nodemgr.h linux-2.6.29-rc3.owrt/drivers/ieee1394/nodemgr.h
+--- linux-2.6.29.owrt/drivers/ieee1394/nodemgr.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/nodemgr.h   2009-05-10 23:48:28.000000000 +0200
+@@ -21,11 +21,9 @@
+ #define _IEEE1394_NODEMGR_H
+ #include <linux/device.h>
+-#include <asm/system.h>
+ #include <asm/types.h>
+ #include "ieee1394_core.h"
+-#include "ieee1394_transactions.h"
+ #include "ieee1394_types.h"
+ struct csr1212_csr;
+@@ -156,22 +154,6 @@
+ void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *packet);
+ int hpsb_node_write(struct node_entry *ne, u64 addr,
+                   quadlet_t *buffer, size_t length);
+-static inline int hpsb_node_read(struct node_entry *ne, u64 addr,
+-                               quadlet_t *buffer, size_t length)
+-{
+-      unsigned int g = ne->generation;
+-
+-      smp_rmb();
+-      return hpsb_read(ne->host, ne->nodeid, g, addr, buffer, length);
+-}
+-static inline int hpsb_node_lock(struct node_entry *ne, u64 addr, int extcode,
+-                               quadlet_t *buffer, quadlet_t arg)
+-{
+-      unsigned int g = ne->generation;
+-
+-      smp_rmb();
+-      return hpsb_lock(ne->host, ne->nodeid, g, addr, extcode, buffer, arg);
+-}
+ int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *));
+ int init_ieee1394_nodemgr(void);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/ohci1394.h linux-2.6.29-rc3.owrt/drivers/ieee1394/ohci1394.h
+--- linux-2.6.29.owrt/drivers/ieee1394/ohci1394.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/ohci1394.h  2009-05-10 23:48:28.000000000 +0200
+@@ -26,7 +26,7 @@
+ #define OHCI1394_DRIVER_NAME      "ohci1394"
+-#define OHCI1394_MAX_AT_REQ_RETRIES   0xf
++#define OHCI1394_MAX_AT_REQ_RETRIES   0x2
+ #define OHCI1394_MAX_AT_RESP_RETRIES  0x2
+ #define OHCI1394_MAX_PHYS_RESP_RETRIES        0x8
+ #define OHCI1394_MAX_SELF_ID_ERRORS   16
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/ieee1394/sbp2.c linux-2.6.29-rc3.owrt/drivers/ieee1394/sbp2.c
+--- linux-2.6.29.owrt/drivers/ieee1394/sbp2.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/ieee1394/sbp2.c      2009-05-10 23:48:28.000000000 +0200
+@@ -115,8 +115,8 @@
+  */
+ static int sbp2_max_speed = IEEE1394_SPEED_MAX;
+ module_param_named(max_speed, sbp2_max_speed, int, 0644);
+-MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, "
+-               "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)");
++MODULE_PARM_DESC(max_speed, "Force max speed "
++               "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
+ /*
+  * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
+@@ -256,7 +256,7 @@
+ static int sbp2_max_speed_and_size(struct sbp2_lu *);
+-static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa };
++static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
+ static DEFINE_RWLOCK(sbp2_hi_logical_units_lock);
+@@ -347,8 +347,8 @@
+       .sdev_attrs              = sbp2_sysfs_sdev_attrs,
+ };
+-#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+-#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
++/* for match-all entries in sbp2_workarounds_table */
++#define SBP2_ROM_VALUE_WILDCARD 0x1000000
+ /*
+  * List of devices with known bugs.
+@@ -359,70 +359,60 @@
+  */
+ static const struct {
+       u32 firmware_revision;
+-      u32 model;
++      u32 model_id;
+       unsigned workarounds;
+ } sbp2_workarounds_table[] = {
+       /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
+               .firmware_revision      = 0x002800,
+-              .model                  = 0x001010,
++              .model_id               = 0x001010,
+               .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
+                                         SBP2_WORKAROUND_MODE_SENSE_8 |
+                                         SBP2_WORKAROUND_POWER_CONDITION,
+       },
+       /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+               .firmware_revision      = 0x002800,
+-              .model                  = 0x000000,
++              .model_id               = 0x000000,
+               .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY |
+                                         SBP2_WORKAROUND_POWER_CONDITION,
+       },
+       /* Initio bridges, actually only needed for some older ones */ {
+               .firmware_revision      = 0x000200,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model_id               = SBP2_ROM_VALUE_WILDCARD,
+               .workarounds            = SBP2_WORKAROUND_INQUIRY_36,
+       },
+       /* PL-3507 bridge with Prolific firmware */ {
+               .firmware_revision      = 0x012800,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model_id               = SBP2_ROM_VALUE_WILDCARD,
+               .workarounds            = SBP2_WORKAROUND_POWER_CONDITION,
+       },
+       /* Symbios bridge */ {
+               .firmware_revision      = 0xa0b800,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model_id               = SBP2_ROM_VALUE_WILDCARD,
+               .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
+       },
+       /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+               .firmware_revision      = 0x002600,
+-              .model                  = SBP2_ROM_VALUE_WILDCARD,
++              .model_id               = SBP2_ROM_VALUE_WILDCARD,
+               .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
+       },
+-      /*
+-       * iPod 2nd generation: needs 128k max transfer size workaround
+-       * iPod 3rd generation: needs fix capacity workaround
+-       */
+-      {
+-              .firmware_revision      = 0x0a2700,
+-              .model                  = 0x000000,
+-              .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS |
+-                                        SBP2_WORKAROUND_FIX_CAPACITY,
+-      },
+       /* iPod 4th generation */ {
+               .firmware_revision      = 0x0a2700,
+-              .model                  = 0x000021,
++              .model_id               = 0x000021,
+               .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+       },
+       /* iPod mini */ {
+               .firmware_revision      = 0x0a2700,
+-              .model                  = 0x000022,
++              .model_id               = 0x000022,
+               .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+       },
+       /* iPod mini */ {
+               .firmware_revision      = 0x0a2700,
+-              .model                  = 0x000023,
++              .model_id               = 0x000023,
+               .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+       },
+       /* iPod Photo */ {
+               .firmware_revision      = 0x0a2700,
+-              .model                  = 0x00007e,
++              .model_id               = 0x00007e,
+               .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
+       }
+ };
+@@ -1351,15 +1341,13 @@
+       struct csr1212_keyval *kv;
+       struct csr1212_dentry *dentry;
+       u64 management_agent_addr;
+-      u32 unit_characteristics, firmware_revision, model;
++      u32 unit_characteristics, firmware_revision;
+       unsigned workarounds;
+       int i;
+       management_agent_addr = 0;
+       unit_characteristics = 0;
+-      firmware_revision = SBP2_ROM_VALUE_MISSING;
+-      model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
+-                              ud->model_id : SBP2_ROM_VALUE_MISSING;
++      firmware_revision = 0;
+       csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
+               switch (kv->key.id) {
+@@ -1400,9 +1388,9 @@
+                           sbp2_workarounds_table[i].firmware_revision !=
+                           (firmware_revision & 0xffff00))
+                               continue;
+-                      if (sbp2_workarounds_table[i].model !=
++                      if (sbp2_workarounds_table[i].model_id !=
+                           SBP2_ROM_VALUE_WILDCARD &&
+-                          sbp2_workarounds_table[i].model != model)
++                          sbp2_workarounds_table[i].model_id != ud->model_id)
+                               continue;
+                       workarounds |= sbp2_workarounds_table[i].workarounds;
+                       break;
+@@ -1415,7 +1403,7 @@
+                         NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+                         workarounds, firmware_revision,
+                         ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+-                        model);
++                        ud->model_id);
+       /* We would need one SCSI host template for each target to adjust
+        * max_sectors on the fly, therefore warn only. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_cm.c linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_cm.c
+--- linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_cm.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_cm.c   2009-05-10 23:48:28.000000000 +0200
+@@ -2490,14 +2490,12 @@
+       int ret = 0;
+       struct nes_vnic *nesvnic;
+       struct nes_device *nesdev;
+-      struct nes_ib_device *nesibdev;
+       nesvnic = to_nesvnic(nesqp->ibqp.device);
+       if (!nesvnic)
+               return -EINVAL;
+       nesdev = nesvnic->nesdev;
+-      nesibdev = nesvnic->nesibdev;
+       nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
+                       atomic_read(&nesvnic->netdev->refcnt));
+@@ -2509,8 +2507,6 @@
+       } else {
+               /* Need to free the Last Streaming Mode Message */
+               if (nesqp->ietf_frame) {
+-                      if (nesqp->lsmm_mr)
+-                              nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
+                       pci_free_consistent(nesdev->pcidev,
+                                       nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
+                                       nesqp->ietf_frame, nesqp->ietf_frame_pbase);
+@@ -2547,12 +2543,6 @@
+       u32 crc_value;
+       int ret;
+       int passive_state;
+-      struct nes_ib_device *nesibdev;
+-      struct ib_mr *ibmr = NULL;
+-      struct ib_phys_buf ibphysbuf;
+-      struct nes_pd *nespd;
+-
+-
+       ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
+       if (!ibqp)
+@@ -2611,26 +2601,6 @@
+       if (cm_id->remote_addr.sin_addr.s_addr !=
+                       cm_id->local_addr.sin_addr.s_addr) {
+               u64temp = (unsigned long)nesqp;
+-              nesibdev = nesvnic->nesibdev;
+-              nespd = nesqp->nespd;
+-              ibphysbuf.addr = nesqp->ietf_frame_pbase;
+-              ibphysbuf.size = conn_param->private_data_len +
+-                                      sizeof(struct ietf_mpa_frame);
+-              ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
+-                                              &ibphysbuf, 1,
+-                                              IB_ACCESS_LOCAL_WRITE,
+-                                              (u64 *)&nesqp->ietf_frame);
+-              if (!ibmr) {
+-                      nes_debug(NES_DBG_CM, "Unable to register memory region"
+-                                      "for lSMM for cm_node = %p \n",
+-                                      cm_node);
+-                      return -ENOMEM;
+-              }
+-
+-              ibmr->pd = &nespd->ibpd;
+-              ibmr->device = nespd->ibpd.device;
+-              nesqp->lsmm_mr = ibmr;
+-
+               u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+               set_wqe_64bit_value(wqe->wqe_words,
+                       NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
+@@ -2641,13 +2611,14 @@
+               wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
+                       cpu_to_le32(conn_param->private_data_len +
+                       sizeof(struct ietf_mpa_frame));
+-              set_wqe_64bit_value(wqe->wqe_words,
+-                                      NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+-                                      (u64)nesqp->ietf_frame);
++              wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
++                      cpu_to_le32((u32)nesqp->ietf_frame_pbase);
++              wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
++                      cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+               wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
+                       cpu_to_le32(conn_param->private_data_len +
+                       sizeof(struct ietf_mpa_frame));
+-              wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
++              wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+               nesqp->nesqp_context->ird_ord_sizes |=
+                       cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_verbs.c linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_verbs.c
+--- linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_verbs.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_verbs.c        2009-05-10 23:48:28.000000000 +0200
+@@ -1360,10 +1360,8 @@
+                                       NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT);
+                       nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size <<
+                                       NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT);
+-                      if (!udata) {
+                               nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN);
+                               nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN);
+-                      }
+                       nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number +
+                                       ((u32)nesqp->nesrcq->hw_cq.cq_number << 16));
+                       u64temp = (u64)nesqp->hwqp.sq_pbase;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_verbs.h linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_verbs.h
+--- linux-2.6.29.owrt/drivers/infiniband/hw/nes/nes_verbs.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/infiniband/hw/nes/nes_verbs.h        2009-05-10 23:48:28.000000000 +0200
+@@ -134,7 +134,6 @@
+       struct ietf_mpa_frame *ietf_frame;
+       dma_addr_t            ietf_frame_pbase;
+       wait_queue_head_t     state_waitq;
+-      struct ib_mr          *lsmm_mr;
+       unsigned long         socket;
+       struct nes_hw_qp      hwqp;
+       struct work_struct    work;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/keyboard/atkbd.c linux-2.6.29-rc3.owrt/drivers/input/keyboard/atkbd.c
+--- linux-2.6.29.owrt/drivers/input/keyboard/atkbd.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/keyboard/atkbd.c       2009-05-10 23:48:28.000000000 +0200
+@@ -839,7 +839,7 @@
+  */
+ static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
+ {
+-      static const unsigned int forced_release_keys[] = {
++      const unsigned int forced_release_keys[] = {
+               0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
+       };
+       int i;
+@@ -856,7 +856,7 @@
+  */
+ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
+ {
+-      static const unsigned int forced_release_keys[] = {
++      const unsigned int forced_release_keys[] = {
+               0x94,
+       };
+       int i;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/keyboard/bf54x-keys.c linux-2.6.29-rc3.owrt/drivers/input/keyboard/bf54x-keys.c
+--- linux-2.6.29.owrt/drivers/input/keyboard/bf54x-keys.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/keyboard/bf54x-keys.c  2009-05-10 23:48:28.000000000 +0200
+@@ -209,8 +209,8 @@
+               goto out;
+       }
+-      if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
+-          !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
++      if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
++          !pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
+               printk(KERN_ERR DRV_NAME
+                       ": Invalid Debounce/Columdrive Time from pdata\n");
+               bfin_write_KPAD_MSEL(0xFF0);    /* Default MSEL */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/keyboard/corgikbd.c linux-2.6.29-rc3.owrt/drivers/input/keyboard/corgikbd.c
+--- linux-2.6.29.owrt/drivers/input/keyboard/corgikbd.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/keyboard/corgikbd.c    2009-05-10 23:48:28.000000000 +0200
+@@ -288,7 +288,7 @@
+ #define corgikbd_resume               NULL
+ #endif
+-static int __devinit corgikbd_probe(struct platform_device *pdev)
++static int __init corgikbd_probe(struct platform_device *pdev)
+ {
+       struct corgikbd *corgikbd;
+       struct input_dev *input_dev;
+@@ -368,7 +368,7 @@
+       return err;
+ }
+-static int __devexit corgikbd_remove(struct platform_device *pdev)
++static int corgikbd_remove(struct platform_device *pdev)
+ {
+       int i;
+       struct corgikbd *corgikbd = platform_get_drvdata(pdev);
+@@ -388,7 +388,7 @@
+ static struct platform_driver corgikbd_driver = {
+       .probe          = corgikbd_probe,
+-      .remove         = __devexit_p(corgikbd_remove),
++      .remove         = corgikbd_remove,
+       .suspend        = corgikbd_suspend,
+       .resume         = corgikbd_resume,
+       .driver         = {
+@@ -397,7 +397,7 @@
+       },
+ };
+-static int __init corgikbd_init(void)
++static int __devinit corgikbd_init(void)
+ {
+       return platform_driver_register(&corgikbd_driver);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/keyboard/omap-keypad.c linux-2.6.29-rc3.owrt/drivers/input/keyboard/omap-keypad.c
+--- linux-2.6.29.owrt/drivers/input/keyboard/omap-keypad.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/keyboard/omap-keypad.c 2009-05-10 23:48:28.000000000 +0200
+@@ -279,7 +279,7 @@
+ #define omap_kp_resume        NULL
+ #endif
+-static int __devinit omap_kp_probe(struct platform_device *pdev)
++static int __init omap_kp_probe(struct platform_device *pdev)
+ {
+       struct omap_kp *omap_kp;
+       struct input_dev *input_dev;
+@@ -422,7 +422,7 @@
+       return -EINVAL;
+ }
+-static int __devexit omap_kp_remove(struct platform_device *pdev)
++static int omap_kp_remove(struct platform_device *pdev)
+ {
+       struct omap_kp *omap_kp = platform_get_drvdata(pdev);
+@@ -454,7 +454,7 @@
+ static struct platform_driver omap_kp_driver = {
+       .probe          = omap_kp_probe,
+-      .remove         = __devexit_p(omap_kp_remove),
++      .remove         = omap_kp_remove,
+       .suspend        = omap_kp_suspend,
+       .resume         = omap_kp_resume,
+       .driver         = {
+@@ -463,7 +463,7 @@
+       },
+ };
+-static int __init omap_kp_init(void)
++static int __devinit omap_kp_init(void)
+ {
+       printk(KERN_INFO "OMAP Keypad Driver\n");
+       return platform_driver_register(&omap_kp_driver);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/keyboard/spitzkbd.c linux-2.6.29-rc3.owrt/drivers/input/keyboard/spitzkbd.c
+--- linux-2.6.29.owrt/drivers/input/keyboard/spitzkbd.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/keyboard/spitzkbd.c    2009-05-10 23:48:28.000000000 +0200
+@@ -343,7 +343,7 @@
+ #define spitzkbd_resume               NULL
+ #endif
+-static int __devinit spitzkbd_probe(struct platform_device *dev)
++static int __init spitzkbd_probe(struct platform_device *dev)
+ {
+       struct spitzkbd *spitzkbd;
+       struct input_dev *input_dev;
+@@ -444,7 +444,7 @@
+       return err;
+ }
+-static int __devexit spitzkbd_remove(struct platform_device *dev)
++static int spitzkbd_remove(struct platform_device *dev)
+ {
+       int i;
+       struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
+@@ -470,7 +470,7 @@
+ static struct platform_driver spitzkbd_driver = {
+       .probe          = spitzkbd_probe,
+-      .remove         = __devexit_p(spitzkbd_remove),
++      .remove         = spitzkbd_remove,
+       .suspend        = spitzkbd_suspend,
+       .resume         = spitzkbd_resume,
+       .driver         = {
+@@ -479,7 +479,7 @@
+       },
+ };
+-static int __init spitzkbd_init(void)
++static int __devinit spitzkbd_init(void)
+ {
+       return platform_driver_register(&spitzkbd_driver);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/mouse/elantech.c linux-2.6.29-rc3.owrt/drivers/input/mouse/elantech.c
+--- linux-2.6.29.owrt/drivers/input/mouse/elantech.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/mouse/elantech.c       2009-05-10 23:48:28.000000000 +0200
+@@ -542,7 +542,7 @@
+           ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
+           ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
+           ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+-              pr_debug("elantech.c: sending Elantech magic knock failed.\n");
++              pr_err("elantech.c: sending Elantech magic knock failed.\n");
+               return -1;
+       }
+@@ -551,27 +551,8 @@
+        * set of magic numbers
+        */
+       if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
+-              pr_debug("elantech.c: "
+-                       "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+-                       param[0], param[1], param[2]);
+-              return -1;
+-      }
+-
+-      /*
+-       * Query touchpad's firmware version and see if it reports known
+-       * value to avoid mis-detection. Logitech mice are known to respond
+-       * to Elantech magic knock and there might be more.
+-       */
+-      if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+-              pr_debug("elantech.c: failed to query firmware version.\n");
+-              return -1;
+-      }
+-
+-      pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+-               param[0], param[1], param[2]);
+-
+-      if (param[0] == 0 || param[1] != 0) {
+-              pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
++              pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
++                      param[0], param[1], param[2]);
+               return -1;
+       }
+@@ -619,7 +600,8 @@
+       int i, error;
+       unsigned char param[3];
+-      psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
++      etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
++      psmouse->private = etd;
+       if (!etd)
+               return -1;
+@@ -628,12 +610,14 @@
+               etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
+       /*
+-       * Do the version query again so we can store the result
++       * Find out what version hardware this is
+        */
+       if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+               pr_err("elantech.c: failed to query firmware version.\n");
+               goto init_fail;
+       }
++      pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
++              param[0], param[1], param[2]);
+       etd->fw_version_maj = param[0];
+       etd->fw_version_min = param[2];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/mouse/Kconfig linux-2.6.29-rc3.owrt/drivers/input/mouse/Kconfig
+--- linux-2.6.29.owrt/drivers/input/mouse/Kconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/mouse/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -70,7 +70,7 @@
+ config MOUSE_PS2_LIFEBOOK
+       bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
+       default y
+-      depends on MOUSE_PS2 && X86
++      depends on MOUSE_PS2
+       help
+         Say Y here if you have a Fujitsu B-series Lifebook PS/2
+         TouchScreen connected to your system.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/mouse/pxa930_trkball.c linux-2.6.29-rc3.owrt/drivers/input/mouse/pxa930_trkball.c
+--- linux-2.6.29.owrt/drivers/input/mouse/pxa930_trkball.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/mouse/pxa930_trkball.c 2009-05-10 23:48:28.000000000 +0200
+@@ -83,7 +83,7 @@
+       __raw_writel(v, trkball->mmio_base + TBCR);
+-      while (--i) {
++      while (i--) {
+               if (__raw_readl(trkball->mmio_base + TBCR) == v)
+                       break;
+               msleep(1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/mouse/synaptics.c linux-2.6.29-rc3.owrt/drivers/input/mouse/synaptics.c
+--- linux-2.6.29.owrt/drivers/input/mouse/synaptics.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/mouse/synaptics.c      2009-05-10 23:48:28.000000000 +0200
+@@ -182,6 +182,11 @@
+ static int synaptics_query_hardware(struct psmouse *psmouse)
+ {
++      int retries = 0;
++
++      while ((retries++ < 3) && psmouse_reset(psmouse))
++              /* empty */;
++
+       if (synaptics_identify(psmouse))
+               return -1;
+       if (synaptics_model_id(psmouse))
+@@ -577,8 +582,6 @@
+       struct synaptics_data *priv = psmouse->private;
+       struct synaptics_data old_priv = *priv;
+-      psmouse_reset(psmouse);
+-
+       if (synaptics_detect(psmouse, 0))
+               return -1;
+@@ -637,8 +640,6 @@
+       if (!priv)
+               return -1;
+-      psmouse_reset(psmouse);
+-
+       if (synaptics_query_hardware(psmouse)) {
+               printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+               goto init_fail;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/serio/ambakmi.c linux-2.6.29-rc3.owrt/drivers/input/serio/ambakmi.c
+--- linux-2.6.29.owrt/drivers/input/serio/ambakmi.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/serio/ambakmi.c        2009-05-10 23:48:28.000000000 +0200
+@@ -57,7 +57,7 @@
+       struct amba_kmi_port *kmi = io->port_data;
+       unsigned int timeleft = 10000; /* timeout in 100ms */
+-      while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
++      while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
+               udelay(10);
+       if (timeleft)
+@@ -129,8 +129,8 @@
+       io->write       = amba_kmi_write;
+       io->open        = amba_kmi_open;
+       io->close       = amba_kmi_close;
+-      strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+-      strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
++      strlcpy(io->name, dev->dev.bus_id, sizeof(io->name));
++      strlcpy(io->phys, dev->dev.bus_id, sizeof(io->phys));
+       io->port_data   = kmi;
+       io->dev.parent  = &dev->dev;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/serio/gscps2.c linux-2.6.29-rc3.owrt/drivers/input/serio/gscps2.c
+--- linux-2.6.29.owrt/drivers/input/serio/gscps2.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/serio/gscps2.c 2009-05-10 23:48:28.000000000 +0200
+@@ -359,7 +359,7 @@
+       snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+                (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
+-      strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
++      strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+       serio->id.type          = SERIO_8042;
+       serio->write            = gscps2_write;
+       serio->open             = gscps2_open;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/serio/sa1111ps2.c linux-2.6.29-rc3.owrt/drivers/input/serio/sa1111ps2.c
+--- linux-2.6.29.owrt/drivers/input/serio/sa1111ps2.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/serio/sa1111ps2.c      2009-05-10 23:48:28.000000000 +0200
+@@ -246,8 +246,8 @@
+       serio->write            = ps2_write;
+       serio->open             = ps2_open;
+       serio->close            = ps2_close;
+-      strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+-      strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
++      strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name));
++      strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+       serio->port_data        = ps2if;
+       serio->dev.parent       = &dev->dev;
+       ps2if->io               = serio;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/touchscreen/atmel_tsadcc.c linux-2.6.29-rc3.owrt/drivers/input/touchscreen/atmel_tsadcc.c
+--- linux-2.6.29.owrt/drivers/input/touchscreen/atmel_tsadcc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/touchscreen/atmel_tsadcc.c     2009-05-10 23:48:28.000000000 +0200
+@@ -236,7 +236,7 @@
+       ts_dev->bufferedmeasure = 0;
+       snprintf(ts_dev->phys, sizeof(ts_dev->phys),
+-               "%s/input0", dev_name(&pdev->dev));
++               "%s/input0", pdev->dev.bus_id);
+       input_dev->name = "atmel touch screen controller";
+       input_dev->phys = ts_dev->phys;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/touchscreen/corgi_ts.c linux-2.6.29-rc3.owrt/drivers/input/touchscreen/corgi_ts.c
+--- linux-2.6.29.owrt/drivers/input/touchscreen/corgi_ts.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/touchscreen/corgi_ts.c 2009-05-10 23:48:28.000000000 +0200
+@@ -268,7 +268,7 @@
+ #define corgits_resume                NULL
+ #endif
+-static int __devinit corgits_probe(struct platform_device *pdev)
++static int __init corgits_probe(struct platform_device *pdev)
+ {
+       struct corgi_ts *corgi_ts;
+       struct input_dev *input_dev;
+@@ -343,7 +343,7 @@
+       return err;
+ }
+-static int __devexit corgits_remove(struct platform_device *pdev)
++static int corgits_remove(struct platform_device *pdev)
+ {
+       struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
+@@ -352,13 +352,12 @@
+       corgi_ts->machinfo->put_hsync();
+       input_unregister_device(corgi_ts->input);
+       kfree(corgi_ts);
+-
+       return 0;
+ }
+ static struct platform_driver corgits_driver = {
+       .probe          = corgits_probe,
+-      .remove         = __devexit_p(corgits_remove),
++      .remove         = corgits_remove,
+       .suspend        = corgits_suspend,
+       .resume         = corgits_resume,
+       .driver         = {
+@@ -367,7 +366,7 @@
+       },
+ };
+-static int __init corgits_init(void)
++static int __devinit corgits_init(void)
+ {
+       return platform_driver_register(&corgits_driver);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/touchscreen/tsc2007.c linux-2.6.29-rc3.owrt/drivers/input/touchscreen/tsc2007.c
+--- linux-2.6.29.owrt/drivers/input/touchscreen/tsc2007.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/touchscreen/tsc2007.c  2009-05-10 23:48:28.000000000 +0200
+@@ -289,8 +289,7 @@
+       pdata->init_platform_hw();
+-      snprintf(ts->phys, sizeof(ts->phys),
+-               "%s/input0", dev_name(&client->dev));
++      snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+       input_dev->name = "TSC2007 Touchscreen";
+       input_dev->phys = ts->phys;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/input/touchscreen/usbtouchscreen.c linux-2.6.29-rc3.owrt/drivers/input/touchscreen/usbtouchscreen.c
+--- linux-2.6.29.owrt/drivers/input/touchscreen/usbtouchscreen.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/input/touchscreen/usbtouchscreen.c   2009-05-10 23:48:28.000000000 +0200
+@@ -60,10 +60,6 @@
+ module_param(swap_xy, bool, 0644);
+ MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+-static int hwcalib_xy;
+-module_param(hwcalib_xy, bool, 0644);
+-MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+-
+ /* device specifc data/functions */
+ struct usbtouch_usb;
+ struct usbtouch_device_info {
+@@ -122,7 +118,6 @@
+ #define USB_DEVICE_HID_CLASS(vend, prod) \
+       .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+-              | USB_DEVICE_ID_MATCH_INT_PROTOCOL \
+               | USB_DEVICE_ID_MATCH_DEVICE, \
+       .idVendor = (vend), \
+       .idProduct = (prod), \
+@@ -265,13 +260,8 @@
+ static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+ {
+-      if (hwcalib_xy) {
+-              dev->x = (pkt[4] << 8) | pkt[3];
+-              dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+-      } else {
+-              dev->x = (pkt[8] << 8) | pkt[7];
+-              dev->y = (pkt[10] << 8) | pkt[9];
+-      }
++      dev->x = (pkt[8] << 8) | pkt[7];
++      dev->y = (pkt[10] << 8) | pkt[9];
+       dev->touch = (pkt[2] & 0x40) ? 1 : 0;
+       return 1;
+@@ -304,12 +294,6 @@
+                       return ret;
+       }
+-      /* Default min/max xy are the raw values, override if using hw-calib */
+-      if (hwcalib_xy) {
+-              input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+-              input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+-      }
+-
+       return 0;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/isdn/gigaset/bas-gigaset.c linux-2.6.29-rc3.owrt/drivers/isdn/gigaset/bas-gigaset.c
+--- linux-2.6.29.owrt/drivers/isdn/gigaset/bas-gigaset.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/isdn/gigaset/bas-gigaset.c   2009-05-10 23:48:28.000000000 +0200
+@@ -46,9 +46,6 @@
+ /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+ #define IF_WRITEBUF 264
+-/* interrupt pipe message size according to ibid. ch. 2.2 */
+-#define IP_MSGSIZE 3
+-
+ /* Values for the Gigaset 307x */
+ #define USB_GIGA_VENDOR_ID      0x0681
+ #define USB_3070_PRODUCT_ID     0x0001
+@@ -113,7 +110,7 @@
+       unsigned char           *rcvbuf;        /* AT reply receive buffer */
+       struct urb              *urb_int_in;    /* URB for interrupt pipe */
+-      unsigned char           *int_in_buf;
++      unsigned char           int_in_buf[3];
+       spinlock_t              lock;           /* locks all following */
+       int                     basstate;       /* bitmap (BS_*) */
+@@ -660,7 +657,7 @@
+       }
+       /* drop incomplete packets even if the missing bytes wouldn't matter */
+-      if (unlikely(urb->actual_length < IP_MSGSIZE)) {
++      if (unlikely(urb->actual_length < 3)) {
+               dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
+                        urb->actual_length);
+               goto resubmit;
+@@ -2130,7 +2127,6 @@
+ static void gigaset_freecshw(struct cardstate *cs)
+ {
+       /* timers, URBs and rcvbuf are disposed of in disconnect */
+-      kfree(cs->hw.bas->int_in_buf);
+       kfree(cs->hw.bas);
+       cs->hw.bas = NULL;
+ }
+@@ -2144,12 +2140,6 @@
+               pr_err("out of memory\n");
+               return 0;
+       }
+-      ucs->int_in_buf = kmalloc(IP_MSGSIZE, GFP_KERNEL);
+-      if (!ucs->int_in_buf) {
+-              kfree(ucs);
+-              pr_err("out of memory\n");
+-              return 0;
+-      }
+       ucs->urb_cmd_in = NULL;
+       ucs->urb_cmd_out = NULL;
+@@ -2302,7 +2292,7 @@
+       usb_fill_int_urb(ucs->urb_int_in, udev,
+                        usb_rcvintpipe(udev,
+                                       (endpoint->bEndpointAddress) & 0x0f),
+-                       ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
++                       ucs->int_in_buf, 3, read_int_callback, cs,
+                        endpoint->bInterval);
+       if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
+               dev_err(cs->dev, "could not submit interrupt URB: %s\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/isdn/hardware/mISDN/hfcmulti.c linux-2.6.29-rc3.owrt/drivers/isdn/hardware/mISDN/hfcmulti.c
+--- linux-2.6.29.owrt/drivers/isdn/hardware/mISDN/hfcmulti.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/isdn/hardware/mISDN/hfcmulti.c       2009-05-10 23:48:28.000000000 +0200
+@@ -4599,7 +4599,6 @@
+                       printk(KERN_ERR "%s: no memory for coeffs\n",
+                           __func__);
+                       ret = -ENOMEM;
+-                      kfree(bch);
+                       goto free_chan;
+               }
+               bch->nr = ch;
+@@ -4768,7 +4767,6 @@
+                       printk(KERN_ERR "%s: no memory for coeffs\n",
+                           __func__);
+                       ret = -ENOMEM;
+-                      kfree(bch);
+                       goto free_chan;
+               }
+               bch->nr = ch + 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/isdn/sc/shmem.c linux-2.6.29-rc3.owrt/drivers/isdn/sc/shmem.c
+--- linux-2.6.29.owrt/drivers/isdn/sc/shmem.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/isdn/sc/shmem.c      2009-05-10 23:48:28.000000000 +0200
+@@ -54,7 +54,7 @@
+       spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
+       pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
+               ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
+-      pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
++      pr_debug("%s: copying %d bytes from %#lx to %#lx\n",
+               sc_adapter[card]->devicename, n,
+               (unsigned long) src,
+               sc_adapter[card]->rambase + ((unsigned long) dest %0x4000));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/lguest/core.c linux-2.6.29-rc3.owrt/drivers/lguest/core.c
+--- linux-2.6.29.owrt/drivers/lguest/core.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/lguest/core.c        2009-05-10 23:48:28.000000000 +0200
+@@ -224,7 +224,7 @@
+                       break;
+               /* If the Guest asked to be stopped, we sleep.  The Guest's
+-               * clock timer or LHREQ_BREAK from the Waker will wake us. */
++               * clock timer or LHCALL_BREAK from the Waker will wake us. */
+               if (cpu->halted) {
+                       set_current_state(TASK_INTERRUPTIBLE);
+                       schedule();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/lguest/lguest_device.c linux-2.6.29-rc3.owrt/drivers/lguest/lguest_device.c
+--- linux-2.6.29.owrt/drivers/lguest/lguest_device.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/lguest/lguest_device.c       2009-05-10 23:48:28.000000000 +0200
+@@ -212,9 +212,6 @@
+       hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
+ }
+-/* An extern declaration inside a C file is bad form.  Don't do it. */
+-extern void lguest_setup_irq(unsigned int irq);
+-
+ /* This routine finds the first virtqueue described in the configuration of
+  * this device and sets it up.
+  *
+@@ -269,9 +266,6 @@
+               goto unmap;
+       }
+-      /* Make sure the interrupt is allocated. */
+-      lguest_setup_irq(lvq->config.irq);
+-
+       /* Tell the interrupt for this virtqueue to go to the virtio_ring
+        * interrupt handler. */
+       /* FIXME: We used to have a flag for the Host to tell us we could use
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/lguest/lguest_user.c linux-2.6.29-rc3.owrt/drivers/lguest/lguest_user.c
+--- linux-2.6.29.owrt/drivers/lguest/lguest_user.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/lguest/lguest_user.c 2009-05-10 23:48:28.000000000 +0200
+@@ -307,8 +307,9 @@
+        * kmalloc()ed string, either of which is ok to hand to kfree(). */
+       if (!IS_ERR(lg->dead))
+               kfree(lg->dead);
+-      /* Free the memory allocated to the lguest_struct */
+-      kfree(lg);
++      /* We clear the entire structure, which also marks it as free for the
++       * next user. */
++      memset(lg, 0, sizeof(*lg));
+       /* Release lock and exit. */
+       mutex_unlock(&lguest_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/dm.c linux-2.6.29-rc3.owrt/drivers/md/dm.c
+--- linux-2.6.29.owrt/drivers/md/dm.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/dm.c      2009-05-10 23:48:28.000000000 +0200
+@@ -525,12 +525,9 @@
+ static void dec_pending(struct dm_io *io, int error)
+ {
+       unsigned long flags;
+-      int io_error;
+-      struct bio *bio;
+-      struct mapped_device *md = io->md;
+       /* Push-back supersedes any I/O errors */
+-      if (error && !(io->error > 0 && __noflush_suspending(md)))
++      if (error && !(io->error > 0 && __noflush_suspending(io->md)))
+               io->error = error;
+       if (atomic_dec_and_test(&io->io_count)) {
+@@ -540,27 +537,24 @@
+                        * This must be handled before the sleeper on
+                        * suspend queue merges the pushback list.
+                        */
+-                      spin_lock_irqsave(&md->pushback_lock, flags);
+-                      if (__noflush_suspending(md))
+-                              bio_list_add(&md->pushback, io->bio);
++                      spin_lock_irqsave(&io->md->pushback_lock, flags);
++                      if (__noflush_suspending(io->md))
++                              bio_list_add(&io->md->pushback, io->bio);
+                       else
+                               /* noflush suspend was interrupted. */
+                               io->error = -EIO;
+-                      spin_unlock_irqrestore(&md->pushback_lock, flags);
++                      spin_unlock_irqrestore(&io->md->pushback_lock, flags);
+               }
+               end_io_acct(io);
+-              io_error = io->error;
+-              bio = io->bio;
+-
+-              free_io(md, io);
++              if (io->error != DM_ENDIO_REQUEUE) {
++                      trace_block_bio_complete(io->md->queue, io->bio);
+-              if (io_error != DM_ENDIO_REQUEUE) {
+-                      trace_block_bio_complete(md->queue, bio);
+-
+-                      bio_endio(bio, io_error);
++                      bio_endio(io->bio, io->error);
+               }
++
++              free_io(io->md, io);
+       }
+ }
+@@ -568,7 +562,6 @@
+ {
+       int r = 0;
+       struct dm_target_io *tio = bio->bi_private;
+-      struct dm_io *io = tio->io;
+       struct mapped_device *md = tio->io->md;
+       dm_endio_fn endio = tio->ti->type->end_io;
+@@ -592,14 +585,15 @@
+               }
+       }
++      dec_pending(tio->io, error);
++
+       /*
+        * Store md for cleanup instead of tio which is about to get freed.
+        */
+       bio->bi_private = md->bs;
+-      free_tio(md, tio);
+       bio_put(bio);
+-      dec_pending(io, error);
++      free_tio(md, tio);
+ }
+ static sector_t max_io_len(struct mapped_device *md,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/dm-crypt.c linux-2.6.29-rc3.owrt/drivers/md/dm-crypt.c
+--- linux-2.6.29.owrt/drivers/md/dm-crypt.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/dm-crypt.c        2009-05-10 23:48:28.000000000 +0200
+@@ -60,7 +60,6 @@
+ };
+ struct dm_crypt_request {
+-      struct convert_context *ctx;
+       struct scatterlist sg_in;
+       struct scatterlist sg_out;
+ };
+@@ -336,18 +335,6 @@
+       init_completion(&ctx->restart);
+ }
+-static struct dm_crypt_request *dmreq_of_req(struct crypt_config *cc,
+-                                           struct ablkcipher_request *req)
+-{
+-      return (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+-}
+-
+-static struct ablkcipher_request *req_of_dmreq(struct crypt_config *cc,
+-                                             struct dm_crypt_request *dmreq)
+-{
+-      return (struct ablkcipher_request *)((char *)dmreq - cc->dmreq_start);
+-}
+-
+ static int crypt_convert_block(struct crypt_config *cc,
+                              struct convert_context *ctx,
+                              struct ablkcipher_request *req)
+@@ -358,11 +345,10 @@
+       u8 *iv;
+       int r = 0;
+-      dmreq = dmreq_of_req(cc, req);
++      dmreq = (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+       iv = (u8 *)ALIGN((unsigned long)(dmreq + 1),
+                        crypto_ablkcipher_alignmask(cc->tfm) + 1);
+-      dmreq->ctx = ctx;
+       sg_init_table(&dmreq->sg_in, 1);
+       sg_set_page(&dmreq->sg_in, bv_in->bv_page, 1 << SECTOR_SHIFT,
+                   bv_in->bv_offset + ctx->offset_in);
+@@ -409,9 +395,8 @@
+               cc->req = mempool_alloc(cc->req_pool, GFP_NOIO);
+       ablkcipher_request_set_tfm(cc->req, cc->tfm);
+       ablkcipher_request_set_callback(cc->req, CRYPTO_TFM_REQ_MAY_BACKLOG |
+-                                      CRYPTO_TFM_REQ_MAY_SLEEP,
+-                                      kcryptd_async_done,
+-                                      dmreq_of_req(cc, cc->req));
++                                           CRYPTO_TFM_REQ_MAY_SLEEP,
++                                           kcryptd_async_done, ctx);
+ }
+ /*
+@@ -568,22 +553,19 @@
+ static void crypt_dec_pending(struct dm_crypt_io *io)
+ {
+       struct crypt_config *cc = io->target->private;
+-      struct bio *base_bio = io->base_bio;
+-      struct dm_crypt_io *base_io = io->base_io;
+-      int error = io->error;
+       if (!atomic_dec_and_test(&io->pending))
+               return;
+-      mempool_free(io, cc->io_pool);
+-
+-      if (likely(!base_io))
+-              bio_endio(base_bio, error);
++      if (likely(!io->base_io))
++              bio_endio(io->base_bio, io->error);
+       else {
+-              if (error && !base_io->error)
+-                      base_io->error = error;
+-              crypt_dec_pending(base_io);
++              if (io->error && !io->base_io->error)
++                      io->base_io->error = io->error;
++              crypt_dec_pending(io->base_io);
+       }
++
++      mempool_free(io, cc->io_pool);
+ }
+ /*
+@@ -839,8 +821,7 @@
+ static void kcryptd_async_done(struct crypto_async_request *async_req,
+                              int error)
+ {
+-      struct dm_crypt_request *dmreq = async_req->data;
+-      struct convert_context *ctx = dmreq->ctx;
++      struct convert_context *ctx = async_req->data;
+       struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
+       struct crypt_config *cc = io->target->private;
+@@ -849,7 +830,7 @@
+               return;
+       }
+-      mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool);
++      mempool_free(ablkcipher_request_cast(async_req), cc->req_pool);
+       if (!atomic_dec_and_test(&ctx->pending))
+               return;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/dm-io.c linux-2.6.29-rc3.owrt/drivers/md/dm-io.c
+--- linux-2.6.29.owrt/drivers/md/dm-io.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/dm-io.c   2009-05-10 23:48:28.000000000 +0200
+@@ -292,8 +292,6 @@
+                                            (PAGE_SIZE >> SECTOR_SHIFT));
+               num_bvecs = 1 + min_t(int, bio_get_nr_vecs(where->bdev),
+                                     num_bvecs);
+-              if (unlikely(num_bvecs > BIO_MAX_PAGES))
+-                      num_bvecs = BIO_MAX_PAGES;
+               bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
+               bio->bi_sector = where->sector + (where->count - remaining);
+               bio->bi_bdev = where->bdev;
+@@ -330,7 +328,7 @@
+       struct dpages old_pages = *dp;
+       if (sync)
+-              rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
++              rw |= (1 << BIO_RW_SYNC);
+       /*
+        * For multiple regions we need to be careful to rewind
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/dm-ioctl.c linux-2.6.29-rc3.owrt/drivers/md/dm-ioctl.c
+--- linux-2.6.29.owrt/drivers/md/dm-ioctl.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/dm-ioctl.c        2009-05-10 23:48:28.000000000 +0200
+@@ -704,8 +704,7 @@
+       char *new_name = (char *) param + param->data_start;
+       if (new_name < param->data ||
+-          invalid_str(new_name, (void *) param + param_size) ||
+-          strlen(new_name) > DM_NAME_LEN - 1) {
++          invalid_str(new_name, (void *) param + param_size)) {
+               DMWARN("Invalid new logical volume name supplied.");
+               return -EINVAL;
+       }
+@@ -1064,7 +1063,7 @@
+       r = populate_table(t, param, param_size);
+       if (r) {
+-              dm_table_destroy(t);
++              dm_table_put(t);
+               goto out;
+       }
+@@ -1072,7 +1071,7 @@
+       hc = dm_get_mdptr(md);
+       if (!hc || hc->md != md) {
+               DMWARN("device has been removed from the dev hash table.");
+-              dm_table_destroy(t);
++              dm_table_put(t);
+               up_write(&_hash_lock);
+               r = -ENXIO;
+               goto out;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/dm-kcopyd.c linux-2.6.29-rc3.owrt/drivers/md/dm-kcopyd.c
+--- linux-2.6.29.owrt/drivers/md/dm-kcopyd.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/dm-kcopyd.c       2009-05-10 23:48:28.000000000 +0200
+@@ -344,7 +344,7 @@
+ {
+       int r;
+       struct dm_io_request io_req = {
+-              .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
++              .bi_rw = job->rw | (1 << BIO_RW_SYNC),
+               .mem.type = DM_IO_PAGE_LIST,
+               .mem.ptr.pl = job->pages,
+               .mem.offset = job->offset,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/linear.c linux-2.6.29-rc3.owrt/drivers/md/linear.c
+--- linux-2.6.29.owrt/drivers/md/linear.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/linear.c  2009-05-10 23:48:28.000000000 +0200
+@@ -25,13 +25,13 @@
+ {
+       dev_info_t *hash;
+       linear_conf_t *conf = mddev_to_conf(mddev);
+-      sector_t idx = sector >> conf->sector_shift;
+       /*
+        * sector_div(a,b) returns the remainer and sets a to a/b
+        */
+-      (void)sector_div(idx, conf->spacing);
+-      hash = conf->hash_table[idx];
++      sector >>= conf->sector_shift;
++      (void)sector_div(sector, conf->spacing);
++      hash = conf->hash_table[sector];
+       while (sector >= hash->num_sectors + hash->start_sector)
+               hash++;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/md.c linux-2.6.29-rc3.owrt/drivers/md/md.c
+--- linux-2.6.29.owrt/drivers/md/md.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/md.c      2009-05-10 23:48:28.000000000 +0200
+@@ -214,7 +214,12 @@
+       return mddev;
+ }
+-static void mddev_delayed_delete(struct work_struct *ws);
++static void mddev_delayed_delete(struct work_struct *ws)
++{
++      mddev_t *mddev = container_of(ws, mddev_t, del_work);
++      kobject_del(&mddev->kobj);
++      kobject_put(&mddev->kobj);
++}
+ static void mddev_put(mddev_t *mddev)
+ {
+@@ -469,7 +474,7 @@
+        * causes ENOTSUPP, we allocate a spare bio...
+        */
+       struct bio *bio = bio_alloc(GFP_NOIO, 1);
+-      int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
++      int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC);
+       bio->bi_bdev = rdev->bdev;
+       bio->bi_sector = sector;
+@@ -526,7 +531,7 @@
+       struct completion event;
+       int ret;
+-      rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
++      rw |= (1 << BIO_RW_SYNC);
+       bio->bi_bdev = bdev;
+       bio->bi_sector = sector;
+@@ -1476,11 +1481,6 @@
+               if (find_rdev_nr(mddev, rdev->desc_nr))
+                       return -EBUSY;
+       }
+-      if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) {
+-              printk(KERN_WARNING "md: %s: array is limited to %d devices\n",
+-                     mdname(mddev), mddev->max_disks);
+-              return -EBUSY;
+-      }
+       bdevname(rdev->bdev,b);
+       while ( (s=strchr(b, '/')) != NULL)
+               *s = '!';
+@@ -2441,15 +2441,6 @@
+       i = 0;
+       rdev_for_each(rdev, tmp, mddev) {
+-              if (rdev->desc_nr >= mddev->max_disks ||
+-                  i > mddev->max_disks) {
+-                      printk(KERN_WARNING
+-                             "md: %s: %s: only %d devices permitted\n",
+-                             mdname(mddev), bdevname(rdev->bdev, b),
+-                             mddev->max_disks);
+-                      kick_rdev_from_array(rdev);
+-                      continue;
+-              }
+               if (rdev != freshest)
+                       if (super_types[mddev->major_version].
+                           validate_super(mddev, rdev)) {
+@@ -3537,21 +3528,6 @@
+ int mdp_major = 0;
+-static void mddev_delayed_delete(struct work_struct *ws)
+-{
+-      mddev_t *mddev = container_of(ws, mddev_t, del_work);
+-
+-      if (mddev->private == &md_redundancy_group) {
+-              sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+-              if (mddev->sysfs_action)
+-                      sysfs_put(mddev->sysfs_action);
+-              mddev->sysfs_action = NULL;
+-              mddev->private = NULL;
+-      }
+-      kobject_del(&mddev->kobj);
+-      kobject_put(&mddev->kobj);
+-}
+-
+ static int md_alloc(dev_t dev, char *name)
+ {
+       static DEFINE_MUTEX(disks_mutex);
+@@ -4043,9 +4019,13 @@
+                       mddev->queue->merge_bvec_fn = NULL;
+                       mddev->queue->unplug_fn = NULL;
+                       mddev->queue->backing_dev_info.congested_fn = NULL;
++                      if (mddev->pers->sync_request) {
++                              sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
++                              if (mddev->sysfs_action)
++                                      sysfs_put(mddev->sysfs_action);
++                              mddev->sysfs_action = NULL;
++                      }
+                       module_put(mddev->pers->owner);
+-                      if (mddev->pers->sync_request)
+-                              mddev->private = &md_redundancy_group;
+                       mddev->pers = NULL;
+                       /* tell userspace to handle 'inactive' */
+                       sysfs_notify_dirent(mddev->sysfs_state);
+@@ -4634,6 +4614,13 @@
+        * noticed in interrupt contexts ...
+        */
++      if (rdev->desc_nr == mddev->max_disks) {
++              printk(KERN_WARNING "%s: can not hot-add to full array!\n",
++                      mdname(mddev));
++              err = -EBUSY;
++              goto abort_unbind_export;
++      }
++
+       rdev->raid_disk = -1;
+       md_update_sb(mddev, 1);
+@@ -4647,6 +4634,9 @@
+       md_new_event(mddev);
+       return 0;
++abort_unbind_export:
++      unbind_rdev_from_array(rdev);
++
+ abort_export:
+       export_rdev(rdev);
+       return err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/raid10.c linux-2.6.29-rc3.owrt/drivers/md/raid10.c
+--- linux-2.6.29.owrt/drivers/md/raid10.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/raid10.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1236,7 +1236,6 @@
+       /* for reconstruct, we always reschedule after a read.
+        * for resync, only after all reads
+        */
+-      rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
+       if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
+           atomic_dec_and_test(&r10_bio->remaining)) {
+               /* we have read all the blocks,
+@@ -1244,6 +1243,7 @@
+                */
+               reschedule_retry(r10_bio);
+       }
++      rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
+ }
+ static void end_sync_write(struct bio *bio, int error)
+@@ -1264,13 +1264,11 @@
+       update_head_pos(i, r10_bio);
+-      rdev_dec_pending(conf->mirrors[d].rdev, mddev);
+       while (atomic_dec_and_test(&r10_bio->remaining)) {
+               if (r10_bio->master_bio == NULL) {
+                       /* the primary of several recovery bios */
+-                      sector_t s = r10_bio->sectors;
++                      md_done_sync(mddev, r10_bio->sectors, 1);
+                       put_buf(r10_bio);
+-                      md_done_sync(mddev, s, 1);
+                       break;
+               } else {
+                       r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
+@@ -1278,6 +1276,7 @@
+                       r10_bio = r10_bio2;
+               }
+       }
++      rdev_dec_pending(conf->mirrors[d].rdev, mddev);
+ }
+ /*
+@@ -1750,6 +1749,8 @@
+       if (!go_faster && conf->nr_waiting)
+               msleep_interruptible(1000);
++      bitmap_cond_end_sync(mddev->bitmap, sector_nr);
++
+       /* Again, very different code for resync and recovery.
+        * Both must result in an r10bio with a list of bios that
+        * have bi_end_io, bi_sector, bi_bdev set,
+@@ -1885,8 +1886,6 @@
+               /* resync. Schedule a read for every block at this virt offset */
+               int count = 0;
+-              bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+-
+               if (!bitmap_start_sync(mddev->bitmap, sector_nr,
+                                      &sync_blocks, mddev->degraded) &&
+                   !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
+@@ -2011,13 +2010,13 @@
+       /* There is nowhere to write, so all non-sync
+        * drives must be failed, so try the next chunk...
+        */
+-      if (sector_nr + max_sync < max_sector)
+-              max_sector = sector_nr + max_sync;
+-
+-      sectors_skipped += (max_sector - sector_nr);
++      {
++      sector_t sec = max_sector - sector_nr;
++      sectors_skipped += sec;
+       chunks_skipped ++;
+       sector_nr = max_sector;
+       goto skipped;
++      }
+ }
+ static int run(mddev_t *mddev)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/md/raid1.c linux-2.6.29-rc3.owrt/drivers/md/raid1.c
+--- linux-2.6.29.owrt/drivers/md/raid1.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/md/raid1.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1237,9 +1237,8 @@
+       update_head_pos(mirror, r1_bio);
+       if (atomic_dec_and_test(&r1_bio->remaining)) {
+-              sector_t s = r1_bio->sectors;
++              md_done_sync(mddev, r1_bio->sectors, uptodate);
+               put_buf(r1_bio);
+-              md_done_sync(mddev, s, uptodate);
+       }
+ }
+@@ -1641,8 +1640,7 @@
+                       }
+                       bio = r1_bio->bios[r1_bio->read_disk];
+-                      if ((disk=read_balance(conf, r1_bio)) == -1 ||
+-                          disk == r1_bio->read_disk) {
++                      if ((disk=read_balance(conf, r1_bio)) == -1) {
+                               printk(KERN_ALERT "raid1: %s: unrecoverable I/O"
+                                      " read error for block %llu\n",
+                                      bdevname(bio->bi_bdev,b),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/common/saa7146_video.c linux-2.6.29-rc3.owrt/drivers/media/common/saa7146_video.c
+--- linux-2.6.29.owrt/drivers/media/common/saa7146_video.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/common/saa7146_video.c 2009-05-10 23:48:28.000000000 +0200
+@@ -576,7 +576,6 @@
+               vv->vflip = c->value;
+               break;
+       default: {
+-              mutex_unlock(&dev->lock);
+               return -EINVAL;
+       }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/common/tuners/mxl5007t.c linux-2.6.29-rc3.owrt/drivers/media/common/tuners/mxl5007t.c
+--- linux-2.6.29.owrt/drivers/media/common/tuners/mxl5007t.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/common/tuners/mxl5007t.c       2009-05-10 23:48:28.000000000 +0200
+@@ -657,7 +657,7 @@
+ {
+       struct mxl5007t_state *state = fe->tuner_priv;
+       int rf_locked, ref_locked;
+-      s32 rf_input_level = 0;
++      s32 rf_input_level;
+       int ret;
+       if (fe->ops.i2c_gate_ctrl)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/common/tuners/tuner-simple.c linux-2.6.29-rc3.owrt/drivers/media/common/tuners/tuner-simple.c
+--- linux-2.6.29.owrt/drivers/media/common/tuners/tuner-simple.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/common/tuners/tuner-simple.c   2009-05-10 23:48:28.000000000 +0200
+@@ -318,6 +318,7 @@
+                           u8 *config, u8 *cb)
+ {
+       struct tuner_simple_priv *priv = fe->tuner_priv;
++      u8 tuneraddr;
+       int rc;
+       /* tv norm specific stuff for multi-norm tuners */
+@@ -386,7 +387,6 @@
+       case TUNER_PHILIPS_TUV1236D:
+       {
+-              struct tuner_i2c_props i2c = priv->i2c_props;
+               /* 0x40 -> ATSC antenna input 1 */
+               /* 0x48 -> ATSC antenna input 2 */
+               /* 0x00 -> NTSC antenna input 1 */
+@@ -398,15 +398,17 @@
+                       buffer[1] = 0x04;
+               }
+               /* set to the correct mode (analog or digital) */
+-              i2c.addr = 0x0a;
+-              rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
++              tuneraddr = priv->i2c_props.addr;
++              priv->i2c_props.addr = 0x0a;
++              rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+               if (2 != rc)
+                       tuner_warn("i2c i/o error: rc == %d "
+                                  "(should be 2)\n", rc);
+-              rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
++              rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+               if (2 != rc)
+                       tuner_warn("i2c i/o error: rc == %d "
+                                  "(should be 2)\n", rc);
++              priv->i2c_props.addr = tuneraddr;
+               break;
+       }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop.c linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop.c
+--- linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop.c     2009-05-10 23:48:28.000000000 +0200
+@@ -212,7 +212,8 @@
+       v210.sw_reset_210.Block_reset_enable = 0xb2;
+       fc->write_ibi_reg(fc,sw_reset_210,v210);
+-      udelay(1000);
++      msleep(1);
++
+       fc->write_ibi_reg(fc,ctrl_208,v208_save);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop-hw-filter.c linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop-hw-filter.c
+--- linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop-hw-filter.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop-hw-filter.c   2009-05-10 23:48:28.000000000 +0200
+@@ -192,7 +192,6 @@
+       return 0;
+ }
+-EXPORT_SYMBOL(flexcop_pid_feed_control);
+ void flexcop_hw_filter_init(struct flexcop_device *fc)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop-pci.c linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop-pci.c
+--- linux-2.6.29.owrt/drivers/media/dvb/b2c2/flexcop-pci.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/b2c2/flexcop-pci.c 2009-05-10 23:48:28.000000000 +0200
+@@ -13,9 +13,9 @@
+ module_param(enable_pid_filtering, int, 0444);
+ MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
+-static int irq_chk_intv = 100;
++static int irq_chk_intv;
+ module_param(irq_chk_intv, int, 0644);
+-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
++MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+ #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+ #define dprintk(level,args...) \
+@@ -34,9 +34,7 @@
+ static int debug;
+ module_param(debug, int, 0644);
+-MODULE_PARM_DESC(debug,
+-      "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+-       DEBSTATUS);
++MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+ #define DRIVER_VERSION "0.1"
+ #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
+@@ -60,8 +58,6 @@
+       int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
+       u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
+       int count;
+-      int count_prev;
+-      int stream_problem;
+       spinlock_t irq_lock;
+@@ -107,32 +103,18 @@
+               container_of(work, struct flexcop_pci, irq_check_work.work);
+       struct flexcop_device *fc = fc_pci->fc_dev;
+-      if (fc->feedcount) {
++      flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+-              if (fc_pci->count == fc_pci->count_prev) {
+-                      deb_chk("no IRQ since the last check\n");
+-                      if (fc_pci->stream_problem++ == 3) {
+-                              struct dvb_demux_feed *feed;
+-
+-                              spin_lock_irq(&fc->demux.lock);
+-                              list_for_each_entry(feed, &fc->demux.feed_list,
+-                                      list_head) {
+-                                      flexcop_pid_feed_control(fc, feed, 0);
+-                              }
+-
+-                              list_for_each_entry(feed, &fc->demux.feed_list,
+-                                      list_head) {
+-                                      flexcop_pid_feed_control(fc, feed, 1);
+-                              }
+-                              spin_unlock_irq(&fc->demux.lock);
+-
+-                              fc_pci->stream_problem = 0;
+-                      }
+-              } else {
+-                      fc_pci->stream_problem = 0;
+-                      fc_pci->count_prev = fc_pci->count;
+-              }
+-      }
++      flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
++
++      if (v.sram_dest_reg_714.net_ovflow_error)
++              deb_chk("sram net_ovflow_error\n");
++      if (v.sram_dest_reg_714.media_ovflow_error)
++              deb_chk("sram media_ovflow_error\n");
++      if (v.sram_dest_reg_714.cai_ovflow_error)
++              deb_chk("sram cai_ovflow_error\n");
++      if (v.sram_dest_reg_714.cai_ovflow_error)
++              deb_chk("sram cai_ovflow_error\n");
+       schedule_delayed_work(&fc_pci->irq_check_work,
+                       msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+@@ -234,12 +216,16 @@
+               flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+               deb_irq("IRQ enabled\n");
+-              fc_pci->count_prev = fc_pci->count;
+-
+ //            fc_pci->active_dma1_addr = 0;
+ //            flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
++              if (irq_chk_intv > 0)
++                      schedule_delayed_work(&fc_pci->irq_check_work,
++                                      msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+       } else {
++              if (irq_chk_intv > 0)
++                      cancel_delayed_work(&fc_pci->irq_check_work);
++
+               flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+               deb_irq("IRQ disabled\n");
+@@ -313,6 +299,8 @@
+                                       IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
+               goto err_pci_iounmap;
++
++
+       fc_pci->init_state |= FC_PCI_INIT;
+       return ret;
+@@ -387,10 +375,6 @@
+       INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
+-              if (irq_chk_intv > 0)
+-                      schedule_delayed_work(&fc_pci->irq_check_work,
+-              msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+-
+       return ret;
+ err_fc_exit:
+@@ -409,9 +393,6 @@
+ {
+       struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+-      if (irq_chk_intv > 0)
+-              cancel_delayed_work(&fc_pci->irq_check_work);
+-
+       flexcop_pci_dma_exit(fc_pci);
+       flexcop_device_exit(fc_pci->fc_dev);
+       flexcop_pci_exit(fc_pci);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/bt8xx/dst.c linux-2.6.29-rc3.owrt/drivers/media/dvb/bt8xx/dst.c
+--- linux-2.6.29.owrt/drivers/media/dvb/bt8xx/dst.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/bt8xx/dst.c        2009-05-10 23:48:28.000000000 +0200
+@@ -1683,7 +1683,7 @@
+ static int dst_get_tuning_algo(struct dvb_frontend *fe)
+ {
+-      return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
++      return dst_algo;
+ }
+ static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dmxdev.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dmxdev.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dmxdev.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dmxdev.c  2009-05-10 23:48:28.000000000 +0200
+@@ -364,15 +364,16 @@
+                                      enum dmx_success success)
+ {
+       struct dmxdev_filter *dmxdevfilter = filter->priv;
++      unsigned long flags;
+       int ret;
+       if (dmxdevfilter->buffer.error) {
+               wake_up(&dmxdevfilter->buffer.queue);
+               return 0;
+       }
+-      spin_lock(&dmxdevfilter->dev->lock);
++      spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+       if (dmxdevfilter->state != DMXDEV_STATE_GO) {
+-              spin_unlock(&dmxdevfilter->dev->lock);
++              spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+               return 0;
+       }
+       del_timer(&dmxdevfilter->timer);
+@@ -391,7 +392,7 @@
+       }
+       if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
+               dmxdevfilter->state = DMXDEV_STATE_DONE;
+-      spin_unlock(&dmxdevfilter->dev->lock);
++      spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+       wake_up(&dmxdevfilter->buffer.queue);
+       return 0;
+ }
+@@ -403,11 +404,12 @@
+ {
+       struct dmxdev_filter *dmxdevfilter = feed->priv;
+       struct dvb_ringbuffer *buffer;
++      unsigned long flags;
+       int ret;
+-      spin_lock(&dmxdevfilter->dev->lock);
++      spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+       if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
+-              spin_unlock(&dmxdevfilter->dev->lock);
++              spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+               return 0;
+       }
+@@ -417,7 +419,7 @@
+       else
+               buffer = &dmxdevfilter->dev->dvr_buffer;
+       if (buffer->error) {
+-              spin_unlock(&dmxdevfilter->dev->lock);
++              spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+               wake_up(&buffer->queue);
+               return 0;
+       }
+@@ -428,7 +430,7 @@
+               dvb_ringbuffer_flush(buffer);
+               buffer->error = ret;
+       }
+-      spin_unlock(&dmxdevfilter->dev->lock);
++      spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+       wake_up(&buffer->queue);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.c  2009-05-10 23:48:28.000000000 +0200
+@@ -93,9 +93,6 @@
+       /* current state of the CAM */
+       int slot_state;
+-      /* mutex used for serializing access to one CI slot */
+-      struct mutex slot_lock;
+-
+       /* Number of CAMCHANGES that have occurred since last processing */
+       atomic_t camchange_count;
+@@ -714,20 +711,14 @@
+       dprintk("%s\n", __func__);
+-      /* sanity check */
++      // sanity check
+       if (bytes_write > ca->slot_info[slot].link_buf_size)
+               return -EINVAL;
+-      /* it is possible we are dealing with a single buffer implementation,
+-         thus if there is data available for read or if there is even a read
+-         already in progress, we do nothing but awake the kernel thread to
+-         process the data if necessary. */
++      /* check if interface is actually waiting for us to read from it, or if a read is in progress */
+       if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
+               goto exitnowrite;
+       if (status & (STATUSREG_DA | STATUSREG_RE)) {
+-              if (status & STATUSREG_DA)
+-                      dvb_ca_en50221_thread_wakeup(ca);
+-
+               status = -EAGAIN;
+               goto exitnowrite;
+       }
+@@ -996,8 +987,6 @@
+               /* go through all the slots processing them */
+               for (slot = 0; slot < ca->slot_count; slot++) {
+-                      mutex_lock(&ca->slot_info[slot].slot_lock);
+-
+                       // check the cam status + deal with CAMCHANGEs
+                       while (dvb_ca_en50221_check_camstatus(ca, slot)) {
+                               /* clear down an old CI slot if necessary */
+@@ -1133,7 +1122,7 @@
+                       case DVB_CA_SLOTSTATE_RUNNING:
+                               if (!ca->open)
+-                                      break;
++                                      continue;
+                               // poll slots for data
+                               pktcount = 0;
+@@ -1157,8 +1146,6 @@
+                               }
+                               break;
+                       }
+-
+-                      mutex_unlock(&ca->slot_info[slot].slot_lock);
+               }
+       }
+@@ -1194,7 +1181,6 @@
+       switch (cmd) {
+       case CA_RESET:
+               for (slot = 0; slot < ca->slot_count; slot++) {
+-                      mutex_lock(&ca->slot_info[slot].slot_lock);
+                       if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
+                               dvb_ca_en50221_slot_shutdown(ca, slot);
+                               if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
+@@ -1202,7 +1188,6 @@
+                                                                    slot,
+                                                                    DVB_CA_EN50221_CAMCHANGE_INSERTED);
+                       }
+-                      mutex_unlock(&ca->slot_info[slot].slot_lock);
+               }
+               ca->next_read_slot = 0;
+               dvb_ca_en50221_thread_wakeup(ca);
+@@ -1323,9 +1308,7 @@
+                               goto exit;
+                       }
+-                      mutex_lock(&ca->slot_info[slot].slot_lock);
+                       status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
+-                      mutex_unlock(&ca->slot_info[slot].slot_lock);
+                       if (status == (fraglen + 2)) {
+                               written = 1;
+                               break;
+@@ -1681,7 +1664,6 @@
+               ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
+               atomic_set(&ca->slot_info[i].camchange_count, 0);
+               ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+-              mutex_init(&ca->slot_info[i].slot_lock);
+       }
+       if (signal_pending(current)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.h linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.h      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_ca_en50221.h  2009-05-10 23:48:28.000000000 +0200
+@@ -45,10 +45,8 @@
+       /* the module owning this structure */
+       struct module* owner;
+-      /* NOTE: the read_*, write_* and poll_slot_status functions will be
+-       * called for different slots concurrently and need to use locks where
+-       * and if appropriate. There will be no concurrent access to one slot.
+-       */
++      /* NOTE: the read_*, write_* and poll_slot_status functions must use locks as
++       * they may be called from several threads at once */
+       /* functions for accessing attribute memory on the CAM */
+       int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_demux.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_demux.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_demux.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_demux.c       2009-05-10 23:48:28.000000000 +0200
+@@ -399,7 +399,9 @@
+ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
+                             size_t count)
+ {
+-      spin_lock(&demux->lock);
++      unsigned long flags;
++
++      spin_lock_irqsave(&demux->lock, flags);
+       while (count--) {
+               if (buf[0] == 0x47)
+@@ -407,16 +409,17 @@
+               buf += 188;
+       }
+-      spin_unlock(&demux->lock);
++      spin_unlock_irqrestore(&demux->lock, flags);
+ }
+ EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
+ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
+ {
++      unsigned long flags;
+       int p = 0, i, j;
+-      spin_lock(&demux->lock);
++      spin_lock_irqsave(&demux->lock, flags);
+       if (demux->tsbufp) {
+               i = demux->tsbufp;
+@@ -449,17 +452,18 @@
+       }
+ bailout:
+-      spin_unlock(&demux->lock);
++      spin_unlock_irqrestore(&demux->lock, flags);
+ }
+ EXPORT_SYMBOL(dvb_dmx_swfilter);
+ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
+ {
++      unsigned long flags;
+       int p = 0, i, j;
+       u8 tmppack[188];
+-      spin_lock(&demux->lock);
++      spin_lock_irqsave(&demux->lock, flags);
+       if (demux->tsbufp) {
+               i = demux->tsbufp;
+@@ -500,7 +504,7 @@
+       }
+ bailout:
+-      spin_unlock(&demux->lock);
++      spin_unlock_irqrestore(&demux->lock, flags);
+ }
+ EXPORT_SYMBOL(dvb_dmx_swfilter_204);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_frontend.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_frontend.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-core/dvb_frontend.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-core/dvb_frontend.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1290,6 +1290,9 @@
+               dprintk("%s() Finalised property cache\n", __func__);
+               dtv_property_cache_submit(fe);
++              /* Request the search algorithm to search */
++              fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
++
+               r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND,
+                       &fepriv->parameters);
+               break;
+@@ -1714,10 +1717,6 @@
+                       fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
+               fepriv->state = FESTATE_RETUNE;
+-
+-              /* Request the search algorithm to search */
+-              fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
+-
+               dvb_frontend_wakeup(fe);
+               dvb_frontend_add_event(fe, 0);
+               fepriv->status = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/af9005-fe.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/af9005-fe.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/af9005-fe.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/af9005-fe.c        2009-05-10 23:48:28.000000000 +0200
+@@ -220,7 +220,7 @@
+                                  u16 * abort_count)
+ {
+       u32 loc_cw_count = 0, loc_err_count;
+-      u16 loc_abort_count = 0;
++      u16 loc_abort_count;
+       int ret;
+       ret =
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/af9015.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/af9015.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/af9015.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/af9015.c   2009-05-10 23:48:28.000000000 +0200
+@@ -694,12 +694,7 @@
+       /* IR remote controller */
+       req.addr = AF9015_EEPROM_IR_MODE;
+-      /* first message will timeout often due to possible hw bug */
+-      for (i = 0; i < 4; i++) {
+-              ret = af9015_rw_udev(udev, &req);
+-              if (!ret)
+-                      break;
+-      }
++      ret = af9015_rw_udev(udev, &req);
+       if (ret)
+               goto error;
+       deb_info("%s: IR mode:%d\n", __func__, val);
+@@ -840,19 +835,18 @@
+       if (!dvb_usb_af9015_dual_mode)
+               af9015_config.dual_mode = 0;
+-      /* Set adapter0 buffer size according to USB port speed, adapter1 buffer
+-         size can be static because it is enabled only USB2.0 */
++      /* set buffer size according to USB port speed */
+       for (i = 0; i < af9015_properties_count; i++) {
+               /* USB1.1 set smaller buffersize and disable 2nd adapter */
+               if (udev->speed == USB_SPEED_FULL) {
+-                      af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+-                              = TS_USB11_MAX_PACKET_SIZE;
++                      af9015_properties[i].adapter->stream.u.bulk.buffersize =
++                              TS_USB11_MAX_PACKET_SIZE;
+                       /* disable 2nd adapter because we don't have
+                          PID-filters */
+                       af9015_config.dual_mode = 0;
+               } else {
+-                      af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+-                              = TS_USB20_MAX_PACKET_SIZE;
++                      af9015_properties[i].adapter->stream.u.bulk.buffersize =
++                              TS_USB20_MAX_PACKET_SIZE;
+               }
+       }
+@@ -1260,12 +1254,6 @@
+                                       .type = USB_BULK,
+                                       .count = 6,
+                                       .endpoint = 0x85,
+-                                      .u = {
+-                                              .bulk = {
+-                                                      .buffersize =
+-                                              TS_USB20_MAX_PACKET_SIZE,
+-                                              }
+-                                      }
+                               },
+                       }
+               },
+@@ -1365,12 +1353,6 @@
+                                       .type = USB_BULK,
+                                       .count = 6,
+                                       .endpoint = 0x85,
+-                                      .u = {
+-                                              .bulk = {
+-                                                      .buffersize =
+-                                              TS_USB20_MAX_PACKET_SIZE,
+-                                              }
+-                                      }
+                               },
+                       }
+               },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/dib0700_devices.c linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/dib0700_devices.c
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/dib0700_devices.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/dib0700_devices.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1393,9 +1393,6 @@
+       { USB_DEVICE(USB_VID_ASUS,      USB_PID_ASUS_U3000H) },
+ /* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
+       { USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E_SE) },
+-      { USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
+-      { USB_DEVICE(USB_VID_TERRATEC,
+-                      USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
+       { 0 }           /* Terminating entry */
+ };
+ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
+@@ -1540,8 +1537,7 @@
+                       {   "DiBcom STK7700D reference design",
+                               { &dib0700_usb_id_table[14], NULL },
+                               { NULL },
+-                      },
+-
++                      }
+               },
+               .rc_interval      = DEFAULT_RC_INTERVAL,
+@@ -1561,7 +1557,7 @@
+                       },
+               },
+-              .num_device_descs = 3,
++              .num_device_descs = 2,
+               .devices = {
+                       {   "ASUS My Cinema U3000 Mini DVBT Tuner",
+                               { &dib0700_usb_id_table[23], NULL },
+@@ -1570,10 +1566,6 @@
+                       {   "Yuan EC372S",
+                               { &dib0700_usb_id_table[31], NULL },
+                               { NULL },
+-                      },
+-                      {   "Terratec Cinergy T Express",
+-                              { &dib0700_usb_id_table[42], NULL },
+-                              { NULL },
+                       }
+               },
+@@ -1661,7 +1653,7 @@
+                       }
+               },
+-              .num_device_descs = 5,
++              .num_device_descs = 4,
+               .devices = {
+                       {   "DiBcom STK7070PD reference design",
+                               { &dib0700_usb_id_table[17], NULL },
+@@ -1678,10 +1670,6 @@
+                       {   "Hauppauge Nova-TD-500 (84xxx)",
+                               { &dib0700_usb_id_table[36], NULL },
+                               { NULL },
+-                      },
+-                      {  "Terratec Cinergy DT USB XS Diversity",
+-                              { &dib0700_usb_id_table[43], NULL },
+-                              { NULL },
+                       }
+               }
+       }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/dvb-usb-ids.h linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+--- linux-2.6.29.owrt/drivers/media/dvb/dvb-usb/dvb-usb-ids.h  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/dvb-usb/dvb-usb-ids.h      2009-05-10 23:48:28.000000000 +0200
+@@ -162,10 +162,8 @@
+ #define USB_PID_AVERMEDIA_A309                                0xa309
+ #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
+ #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY      0x005a
+-#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2    0x0081
+ #define USB_PID_TERRATEC_CINERGY_HT_USB_XE            0x0058
+ #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS           0x0060
+-#define USB_PID_TERRATEC_CINERGY_T_EXPRESS            0x0062
+ #define USB_PID_TERRATEC_CINERGY_T_XXS                        0x0078
+ #define USB_PID_PINNACLE_EXPRESSCARD_320CX            0x022e
+ #define USB_PID_PINNACLE_PCTV2000E                    0x022c
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-1394.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-1394.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-1394.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-1394.c    1970-01-01 01:00:00.000000000 +0100
+@@ -1,285 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2007-2008 Ben Backx <ben@bbackx.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/device.h>
+-#include <linux/errno.h>
+-#include <linux/kernel.h>
+-#include <linux/list.h>
+-#include <linux/spinlock.h>
+-#include <linux/types.h>
+-
+-#include <dma.h>
+-#include <csr1212.h>
+-#include <highlevel.h>
+-#include <hosts.h>
+-#include <ieee1394.h>
+-#include <iso.h>
+-#include <nodemgr.h>
+-
+-#include "firedtv.h"
+-
+-static LIST_HEAD(node_list);
+-static DEFINE_SPINLOCK(node_list_lock);
+-
+-#define FIREWIRE_HEADER_SIZE  4
+-#define CIP_HEADER_SIZE               8
+-
+-static void rawiso_activity_cb(struct hpsb_iso *iso)
+-{
+-      struct firedtv *f, *fdtv = NULL;
+-      unsigned int i, num, packet;
+-      unsigned char *buf;
+-      unsigned long flags;
+-      int count;
+-
+-      spin_lock_irqsave(&node_list_lock, flags);
+-      list_for_each_entry(f, &node_list, list)
+-              if (f->backend_data == iso) {
+-                      fdtv = f;
+-                      break;
+-              }
+-      spin_unlock_irqrestore(&node_list_lock, flags);
+-
+-      packet = iso->first_packet;
+-      num = hpsb_iso_n_ready(iso);
+-
+-      if (!fdtv) {
+-              dev_err(fdtv->device, "received at unknown iso channel\n");
+-              goto out;
+-      }
+-
+-      for (i = 0; i < num; i++, packet = (packet + 1) % iso->buf_packets) {
+-              buf = dma_region_i(&iso->data_buf, unsigned char,
+-                      iso->infos[packet].offset + CIP_HEADER_SIZE);
+-              count = (iso->infos[packet].len - CIP_HEADER_SIZE) /
+-                      (188 + FIREWIRE_HEADER_SIZE);
+-
+-              /* ignore empty packet */
+-              if (iso->infos[packet].len <= CIP_HEADER_SIZE)
+-                      continue;
+-
+-              while (count--) {
+-                      if (buf[FIREWIRE_HEADER_SIZE] == 0x47)
+-                              dvb_dmx_swfilter_packets(&fdtv->demux,
+-                                              &buf[FIREWIRE_HEADER_SIZE], 1);
+-                      else
+-                              dev_err(fdtv->device,
+-                                      "skipping invalid packet\n");
+-                      buf += 188 + FIREWIRE_HEADER_SIZE;
+-              }
+-      }
+-out:
+-      hpsb_iso_recv_release_packets(iso, num);
+-}
+-
+-static inline struct node_entry *node_of(struct firedtv *fdtv)
+-{
+-      return container_of(fdtv->device, struct unit_directory, device)->ne;
+-}
+-
+-static int node_lock(struct firedtv *fdtv, u64 addr, void *data, __be32 arg)
+-{
+-      return hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP, data,
+-                            (__force quadlet_t)arg);
+-}
+-
+-static int node_read(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+-{
+-      return hpsb_node_read(node_of(fdtv), addr, data, len);
+-}
+-
+-static int node_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+-{
+-      return hpsb_node_write(node_of(fdtv), addr, data, len);
+-}
+-
+-#define FDTV_ISO_BUFFER_PACKETS 256
+-#define FDTV_ISO_BUFFER_SIZE (FDTV_ISO_BUFFER_PACKETS * 200)
+-
+-static int start_iso(struct firedtv *fdtv)
+-{
+-      struct hpsb_iso *iso_handle;
+-      int ret;
+-
+-      iso_handle = hpsb_iso_recv_init(node_of(fdtv)->host,
+-                              FDTV_ISO_BUFFER_SIZE, FDTV_ISO_BUFFER_PACKETS,
+-                              fdtv->isochannel, HPSB_ISO_DMA_DEFAULT,
+-                              -1, /* stat.config.irq_interval */
+-                              rawiso_activity_cb);
+-      if (iso_handle == NULL) {
+-              dev_err(fdtv->device, "cannot initialize iso receive\n");
+-              return -ENOMEM;
+-      }
+-      fdtv->backend_data = iso_handle;
+-
+-      ret = hpsb_iso_recv_start(iso_handle, -1, -1, 0);
+-      if (ret != 0) {
+-              dev_err(fdtv->device, "cannot start iso receive\n");
+-              hpsb_iso_shutdown(iso_handle);
+-              fdtv->backend_data = NULL;
+-      }
+-      return ret;
+-}
+-
+-static void stop_iso(struct firedtv *fdtv)
+-{
+-      struct hpsb_iso *iso_handle = fdtv->backend_data;
+-
+-      if (iso_handle != NULL) {
+-              hpsb_iso_stop(iso_handle);
+-              hpsb_iso_shutdown(iso_handle);
+-      }
+-      fdtv->backend_data = NULL;
+-}
+-
+-static const struct firedtv_backend fdtv_1394_backend = {
+-      .lock           = node_lock,
+-      .read           = node_read,
+-      .write          = node_write,
+-      .start_iso      = start_iso,
+-      .stop_iso       = stop_iso,
+-};
+-
+-static void fcp_request(struct hpsb_host *host, int nodeid, int direction,
+-                      int cts, u8 *data, size_t length)
+-{
+-      struct firedtv *f, *fdtv = NULL;
+-      unsigned long flags;
+-      int su;
+-
+-      if (length == 0 || (data[0] & 0xf0) != 0)
+-              return;
+-
+-      su = data[1] & 0x7;
+-
+-      spin_lock_irqsave(&node_list_lock, flags);
+-      list_for_each_entry(f, &node_list, list)
+-              if (node_of(f)->host == host &&
+-                  node_of(f)->nodeid == nodeid &&
+-                  (f->subunit == su || (f->subunit == 0 && su == 0x7))) {
+-                      fdtv = f;
+-                      break;
+-              }
+-      spin_unlock_irqrestore(&node_list_lock, flags);
+-
+-      if (fdtv)
+-              avc_recv(fdtv, data, length);
+-}
+-
+-static int node_probe(struct device *dev)
+-{
+-      struct unit_directory *ud =
+-                      container_of(dev, struct unit_directory, device);
+-      struct firedtv *fdtv;
+-      int kv_len, err;
+-      void *kv_str;
+-
+-      kv_len = (ud->model_name_kv->value.leaf.len - 2) * sizeof(quadlet_t);
+-      kv_str = CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(ud->model_name_kv);
+-
+-      fdtv = fdtv_alloc(dev, &fdtv_1394_backend, kv_str, kv_len);
+-      if (!fdtv)
+-              return -ENOMEM;
+-
+-      /*
+-       * Work around a bug in udev's path_id script:  Use the fw-host's dev
+-       * instead of the unit directory's dev as parent of the input device.
+-       */
+-      err = fdtv_register_rc(fdtv, dev->parent->parent);
+-      if (err)
+-              goto fail_free;
+-
+-      spin_lock_irq(&node_list_lock);
+-      list_add_tail(&fdtv->list, &node_list);
+-      spin_unlock_irq(&node_list_lock);
+-
+-      err = avc_identify_subunit(fdtv);
+-      if (err)
+-              goto fail;
+-
+-      err = fdtv_dvb_register(fdtv);
+-      if (err)
+-              goto fail;
+-
+-      avc_register_remote_control(fdtv);
+-      return 0;
+-fail:
+-      spin_lock_irq(&node_list_lock);
+-      list_del(&fdtv->list);
+-      spin_unlock_irq(&node_list_lock);
+-      fdtv_unregister_rc(fdtv);
+-fail_free:
+-      kfree(fdtv);
+-      return err;
+-}
+-
+-static int node_remove(struct device *dev)
+-{
+-      struct firedtv *fdtv = dev->driver_data;
+-
+-      fdtv_dvb_unregister(fdtv);
+-
+-      spin_lock_irq(&node_list_lock);
+-      list_del(&fdtv->list);
+-      spin_unlock_irq(&node_list_lock);
+-
+-      cancel_work_sync(&fdtv->remote_ctrl_work);
+-      fdtv_unregister_rc(fdtv);
+-
+-      kfree(fdtv);
+-      return 0;
+-}
+-
+-static int node_update(struct unit_directory *ud)
+-{
+-      struct firedtv *fdtv = ud->device.driver_data;
+-
+-      if (fdtv->isochannel >= 0)
+-              cmp_establish_pp_connection(fdtv, fdtv->subunit,
+-                                          fdtv->isochannel);
+-      return 0;
+-}
+-
+-static struct hpsb_protocol_driver fdtv_driver = {
+-      .name           = "firedtv",
+-      .update         = node_update,
+-      .driver         = {
+-              .probe  = node_probe,
+-              .remove = node_remove,
+-      },
+-};
+-
+-static struct hpsb_highlevel fdtv_highlevel = {
+-      .name           = "firedtv",
+-      .fcp_request    = fcp_request,
+-};
+-
+-int __init fdtv_1394_init(struct ieee1394_device_id id_table[])
+-{
+-      int ret;
+-
+-      hpsb_register_highlevel(&fdtv_highlevel);
+-      fdtv_driver.id_table = id_table;
+-      ret = hpsb_register_protocol(&fdtv_driver);
+-      if (ret) {
+-              printk(KERN_ERR "firedtv: failed to register protocol\n");
+-              hpsb_unregister_highlevel(&fdtv_highlevel);
+-      }
+-      return ret;
+-}
+-
+-void __exit fdtv_1394_exit(void)
+-{
+-      hpsb_unregister_protocol(&fdtv_driver);
+-      hpsb_unregister_highlevel(&fdtv_highlevel);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-avc.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-avc.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-avc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-avc.c     1970-01-01 01:00:00.000000000 +0100
+@@ -1,1315 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2008 Ben Backx <ben@bbackx.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/bug.h>
+-#include <linux/crc32.h>
+-#include <linux/delay.h>
+-#include <linux/device.h>
+-#include <linux/jiffies.h>
+-#include <linux/kernel.h>
+-#include <linux/moduleparam.h>
+-#include <linux/mutex.h>
+-#include <linux/string.h>
+-#include <linux/stringify.h>
+-#include <linux/wait.h>
+-#include <linux/workqueue.h>
+-
+-#include "firedtv.h"
+-
+-#define FCP_COMMAND_REGISTER          0xfffff0000b00ULL
+-
+-#define AVC_CTYPE_CONTROL             0x0
+-#define AVC_CTYPE_STATUS              0x1
+-#define AVC_CTYPE_NOTIFY              0x3
+-
+-#define AVC_RESPONSE_ACCEPTED         0x9
+-#define AVC_RESPONSE_STABLE           0xc
+-#define AVC_RESPONSE_CHANGED          0xd
+-#define AVC_RESPONSE_INTERIM          0xf
+-
+-#define AVC_SUBUNIT_TYPE_TUNER                (0x05 << 3)
+-#define AVC_SUBUNIT_TYPE_UNIT         (0x1f << 3)
+-
+-#define AVC_OPCODE_VENDOR             0x00
+-#define AVC_OPCODE_READ_DESCRIPTOR    0x09
+-#define AVC_OPCODE_DSIT                       0xc8
+-#define AVC_OPCODE_DSD                        0xcb
+-
+-#define DESCRIPTOR_TUNER_STATUS       0x80
+-#define DESCRIPTOR_SUBUNIT_IDENTIFIER 0x00
+-
+-#define SFE_VENDOR_DE_COMPANYID_0     0x00 /* OUI of Digital Everywhere */
+-#define SFE_VENDOR_DE_COMPANYID_1     0x12
+-#define SFE_VENDOR_DE_COMPANYID_2     0x87
+-
+-#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a
+-#define SFE_VENDOR_OPCODE_LNB_CONTROL         0x52
+-#define SFE_VENDOR_OPCODE_TUNE_QPSK           0x58 /* for DVB-S */
+-
+-#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION        0x00
+-#define SFE_VENDOR_OPCODE_HOST2CA             0x56
+-#define SFE_VENDOR_OPCODE_CA2HOST             0x57
+-#define SFE_VENDOR_OPCODE_CISTATUS            0x59
+-#define SFE_VENDOR_OPCODE_TUNE_QPSK2          0x60 /* for DVB-S2 */
+-
+-#define SFE_VENDOR_TAG_CA_RESET                       0x00
+-#define SFE_VENDOR_TAG_CA_APPLICATION_INFO    0x01
+-#define SFE_VENDOR_TAG_CA_PMT                 0x02
+-#define SFE_VENDOR_TAG_CA_DATE_TIME           0x04
+-#define SFE_VENDOR_TAG_CA_MMI                 0x05
+-#define SFE_VENDOR_TAG_CA_ENTER_MENU          0x07
+-
+-#define EN50221_LIST_MANAGEMENT_ONLY  0x03
+-#define EN50221_TAG_APP_INFO          0x9f8021
+-#define EN50221_TAG_CA_INFO           0x9f8031
+-
+-struct avc_command_frame {
+-      int length;
+-      u8 ctype;
+-      u8 subunit;
+-      u8 opcode;
+-      u8 operand[509];
+-};
+-
+-struct avc_response_frame {
+-      int length;
+-      u8 response;
+-      u8 subunit;
+-      u8 opcode;
+-      u8 operand[509];
+-};
+-
+-#define AVC_DEBUG_FCP_SUBACTIONS      1
+-#define AVC_DEBUG_FCP_PAYLOADS                2
+-
+-static int avc_debug;
+-module_param_named(debug, avc_debug, int, 0644);
+-MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
+-      ", FCP subactions = "   __stringify(AVC_DEBUG_FCP_SUBACTIONS)
+-      ", FCP payloads = "     __stringify(AVC_DEBUG_FCP_PAYLOADS)
+-      ", or all = -1)");
+-
+-static const char *debug_fcp_ctype(unsigned int ctype)
+-{
+-      static const char *ctypes[] = {
+-              [0x0] = "CONTROL",              [0x1] = "STATUS",
+-              [0x2] = "SPECIFIC INQUIRY",     [0x3] = "NOTIFY",
+-              [0x4] = "GENERAL INQUIRY",      [0x8] = "NOT IMPLEMENTED",
+-              [0x9] = "ACCEPTED",             [0xa] = "REJECTED",
+-              [0xb] = "IN TRANSITION",        [0xc] = "IMPLEMENTED/STABLE",
+-              [0xd] = "CHANGED",              [0xf] = "INTERIM",
+-      };
+-      const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL;
+-
+-      return ret ? ret : "?";
+-}
+-
+-static const char *debug_fcp_opcode(unsigned int opcode,
+-                                  const u8 *data, size_t length)
+-{
+-      switch (opcode) {
+-      case AVC_OPCODE_VENDOR:                 break;
+-      case AVC_OPCODE_READ_DESCRIPTOR:        return "ReadDescriptor";
+-      case AVC_OPCODE_DSIT:                   return "DirectSelectInfo.Type";
+-      case AVC_OPCODE_DSD:                    return "DirectSelectData";
+-      default:                                return "?";
+-      }
+-
+-      if (length < 7 ||
+-          data[3] != SFE_VENDOR_DE_COMPANYID_0 ||
+-          data[4] != SFE_VENDOR_DE_COMPANYID_1 ||
+-          data[5] != SFE_VENDOR_DE_COMPANYID_2)
+-              return "Vendor";
+-
+-      switch (data[6]) {
+-      case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL: return "RegisterRC";
+-      case SFE_VENDOR_OPCODE_LNB_CONTROL:             return "LNBControl";
+-      case SFE_VENDOR_OPCODE_TUNE_QPSK:               return "TuneQPSK";
+-      case SFE_VENDOR_OPCODE_HOST2CA:                 return "Host2CA";
+-      case SFE_VENDOR_OPCODE_CA2HOST:                 return "CA2Host";
+-      }
+-      return "Vendor";
+-}
+-
+-static void debug_fcp(const u8 *data, size_t length)
+-{
+-      unsigned int subunit_type, subunit_id, op;
+-      const char *prefix = data[0] > 7 ? "FCP <- " : "FCP -> ";
+-
+-      if (avc_debug & AVC_DEBUG_FCP_SUBACTIONS) {
+-              subunit_type = data[1] >> 3;
+-              subunit_id = data[1] & 7;
+-              op = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2];
+-              printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
+-                     prefix, subunit_type, subunit_id, length,
+-                     debug_fcp_ctype(data[0]),
+-                     debug_fcp_opcode(op, data, length));
+-      }
+-
+-      if (avc_debug & AVC_DEBUG_FCP_PAYLOADS)
+-              print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE, 16, 1,
+-                             data, length, false);
+-}
+-
+-static int __avc_write(struct firedtv *fdtv,
+-              const struct avc_command_frame *c, struct avc_response_frame *r)
+-{
+-      int err, retry;
+-
+-      if (r)
+-              fdtv->avc_reply_received = false;
+-
+-      for (retry = 0; retry < 6; retry++) {
+-              if (unlikely(avc_debug))
+-                      debug_fcp(&c->ctype, c->length);
+-
+-              err = fdtv->backend->write(fdtv, FCP_COMMAND_REGISTER,
+-                                         (void *)&c->ctype, c->length);
+-              if (err) {
+-                      fdtv->avc_reply_received = true;
+-                      dev_err(fdtv->device, "FCP command write failed\n");
+-                      return err;
+-              }
+-
+-              if (!r)
+-                      return 0;
+-
+-              /*
+-               * AV/C specs say that answers should be sent within 150 ms.
+-               * Time out after 200 ms.
+-               */
+-              if (wait_event_timeout(fdtv->avc_wait,
+-                                     fdtv->avc_reply_received,
+-                                     msecs_to_jiffies(200)) != 0) {
+-                      r->length = fdtv->response_length;
+-                      memcpy(&r->response, fdtv->response, r->length);
+-
+-                      return 0;
+-              }
+-      }
+-      dev_err(fdtv->device, "FCP response timed out\n");
+-      return -ETIMEDOUT;
+-}
+-
+-static int avc_write(struct firedtv *fdtv,
+-              const struct avc_command_frame *c, struct avc_response_frame *r)
+-{
+-      int ret;
+-
+-      if (mutex_lock_interruptible(&fdtv->avc_mutex))
+-              return -EINTR;
+-
+-      ret = __avc_write(fdtv, c, r);
+-
+-      mutex_unlock(&fdtv->avc_mutex);
+-      return ret;
+-}
+-
+-int avc_recv(struct firedtv *fdtv, void *data, size_t length)
+-{
+-      struct avc_response_frame *r =
+-                      data - offsetof(struct avc_response_frame, response);
+-
+-      if (unlikely(avc_debug))
+-              debug_fcp(data, length);
+-
+-      if (length >= 8 &&
+-          r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
+-          r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
+-          r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
+-          r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL) {
+-              if (r->response == AVC_RESPONSE_CHANGED) {
+-                      fdtv_handle_rc(fdtv,
+-                          r->operand[4] << 8 | r->operand[5]);
+-                      schedule_work(&fdtv->remote_ctrl_work);
+-              } else if (r->response != AVC_RESPONSE_INTERIM) {
+-                      dev_info(fdtv->device,
+-                               "remote control result = %d\n", r->response);
+-              }
+-              return 0;
+-      }
+-
+-      if (fdtv->avc_reply_received) {
+-              dev_err(fdtv->device, "out-of-order AVC response, ignored\n");
+-              return -EIO;
+-      }
+-
+-      memcpy(fdtv->response, data, length);
+-      fdtv->response_length = length;
+-
+-      fdtv->avc_reply_received = true;
+-      wake_up(&fdtv->avc_wait);
+-
+-      return 0;
+-}
+-
+-/*
+- * tuning command for setting the relative LNB frequency
+- * (not supported by the AVC standard)
+- */
+-static void avc_tuner_tuneqpsk(struct firedtv *fdtv,
+-                             struct dvb_frontend_parameters *params,
+-                             struct avc_command_frame *c)
+-{
+-      c->opcode = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK;
+-
+-      c->operand[4] = (params->frequency >> 24) & 0xff;
+-      c->operand[5] = (params->frequency >> 16) & 0xff;
+-      c->operand[6] = (params->frequency >> 8) & 0xff;
+-      c->operand[7] = params->frequency & 0xff;
+-
+-      c->operand[8] = ((params->u.qpsk.symbol_rate / 1000) >> 8) & 0xff;
+-      c->operand[9] = (params->u.qpsk.symbol_rate / 1000) & 0xff;
+-
+-      switch (params->u.qpsk.fec_inner) {
+-      case FEC_1_2:   c->operand[10] = 0x1; break;
+-      case FEC_2_3:   c->operand[10] = 0x2; break;
+-      case FEC_3_4:   c->operand[10] = 0x3; break;
+-      case FEC_5_6:   c->operand[10] = 0x4; break;
+-      case FEC_7_8:   c->operand[10] = 0x5; break;
+-      case FEC_4_5:
+-      case FEC_8_9:
+-      case FEC_AUTO:
+-      default:        c->operand[10] = 0x0;
+-      }
+-
+-      if (fdtv->voltage == 0xff)
+-              c->operand[11] = 0xff;
+-      else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */
+-              c->operand[11] = 0;
+-      else
+-              c->operand[11] = 1;
+-
+-      if (fdtv->tone == 0xff)
+-              c->operand[12] = 0xff;
+-      else if (fdtv->tone == SEC_TONE_ON) /* band */
+-              c->operand[12] = 1;
+-      else
+-              c->operand[12] = 0;
+-
+-      if (fdtv->type == FIREDTV_DVB_S2) {
+-              c->operand[13] = 0x1;
+-              c->operand[14] = 0xff;
+-              c->operand[15] = 0xff;
+-              c->length = 20;
+-      } else {
+-              c->length = 16;
+-      }
+-}
+-
+-static void avc_tuner_dsd_dvb_c(struct dvb_frontend_parameters *params,
+-                              struct avc_command_frame *c)
+-{
+-      c->opcode = AVC_OPCODE_DSD;
+-
+-      c->operand[0] = 0;    /* source plug */
+-      c->operand[1] = 0xd2; /* subfunction replace */
+-      c->operand[2] = 0x20; /* system id = DVB */
+-      c->operand[3] = 0x00; /* antenna number */
+-      c->operand[4] = 0x11; /* system_specific_multiplex selection_length */
+-
+-      /* multiplex_valid_flags, high byte */
+-      c->operand[5] =   0 << 7 /* reserved */
+-                      | 0 << 6 /* Polarisation */
+-                      | 0 << 5 /* Orbital_Pos */
+-                      | 1 << 4 /* Frequency */
+-                      | 1 << 3 /* Symbol_Rate */
+-                      | 0 << 2 /* FEC_outer */
+-                      | (params->u.qam.fec_inner  != FEC_AUTO ? 1 << 1 : 0)
+-                      | (params->u.qam.modulation != QAM_AUTO ? 1 << 0 : 0);
+-
+-      /* multiplex_valid_flags, low byte */
+-      c->operand[6] =   0 << 7 /* NetworkID */
+-                      | 0 << 0 /* reserved */ ;
+-
+-      c->operand[7]  = 0x00;
+-      c->operand[8]  = 0x00;
+-      c->operand[9]  = 0x00;
+-      c->operand[10] = 0x00;
+-
+-      c->operand[11] = (((params->frequency / 4000) >> 16) & 0xff) | (2 << 6);
+-      c->operand[12] = ((params->frequency / 4000) >> 8) & 0xff;
+-      c->operand[13] = (params->frequency / 4000) & 0xff;
+-      c->operand[14] = ((params->u.qpsk.symbol_rate / 1000) >> 12) & 0xff;
+-      c->operand[15] = ((params->u.qpsk.symbol_rate / 1000) >> 4) & 0xff;
+-      c->operand[16] = ((params->u.qpsk.symbol_rate / 1000) << 4) & 0xf0;
+-      c->operand[17] = 0x00;
+-
+-      switch (params->u.qpsk.fec_inner) {
+-      case FEC_1_2:   c->operand[18] = 0x1; break;
+-      case FEC_2_3:   c->operand[18] = 0x2; break;
+-      case FEC_3_4:   c->operand[18] = 0x3; break;
+-      case FEC_5_6:   c->operand[18] = 0x4; break;
+-      case FEC_7_8:   c->operand[18] = 0x5; break;
+-      case FEC_8_9:   c->operand[18] = 0x6; break;
+-      case FEC_4_5:   c->operand[18] = 0x8; break;
+-      case FEC_AUTO:
+-      default:        c->operand[18] = 0x0;
+-      }
+-
+-      switch (params->u.qam.modulation) {
+-      case QAM_16:    c->operand[19] = 0x08; break;
+-      case QAM_32:    c->operand[19] = 0x10; break;
+-      case QAM_64:    c->operand[19] = 0x18; break;
+-      case QAM_128:   c->operand[19] = 0x20; break;
+-      case QAM_256:   c->operand[19] = 0x28; break;
+-      case QAM_AUTO:
+-      default:        c->operand[19] = 0x00;
+-      }
+-
+-      c->operand[20] = 0x00;
+-      c->operand[21] = 0x00;
+-      /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+-      c->operand[22] = 0x00;
+-
+-      c->length = 28;
+-}
+-
+-static void avc_tuner_dsd_dvb_t(struct dvb_frontend_parameters *params,
+-                              struct avc_command_frame *c)
+-{
+-      struct dvb_ofdm_parameters *ofdm = &params->u.ofdm;
+-
+-      c->opcode = AVC_OPCODE_DSD;
+-
+-      c->operand[0] = 0;    /* source plug */
+-      c->operand[1] = 0xd2; /* subfunction replace */
+-      c->operand[2] = 0x20; /* system id = DVB */
+-      c->operand[3] = 0x00; /* antenna number */
+-      c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */
+-
+-      /* multiplex_valid_flags, high byte */
+-      c->operand[5] =
+-            0 << 7 /* reserved */
+-          | 1 << 6 /* CenterFrequency */
+-          | (ofdm->bandwidth      != BANDWIDTH_AUTO        ? 1 << 5 : 0)
+-          | (ofdm->constellation  != QAM_AUTO              ? 1 << 4 : 0)
+-          | (ofdm->hierarchy_information != HIERARCHY_AUTO ? 1 << 3 : 0)
+-          | (ofdm->code_rate_HP   != FEC_AUTO              ? 1 << 2 : 0)
+-          | (ofdm->code_rate_LP   != FEC_AUTO              ? 1 << 1 : 0)
+-          | (ofdm->guard_interval != GUARD_INTERVAL_AUTO   ? 1 << 0 : 0);
+-
+-      /* multiplex_valid_flags, low byte */
+-      c->operand[6] =
+-            0 << 7 /* NetworkID */
+-          | (ofdm->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0)
+-          | 0 << 5 /* OtherFrequencyFlag */
+-          | 0 << 0 /* reserved */ ;
+-
+-      c->operand[7]  = 0x0;
+-      c->operand[8]  = (params->frequency / 10) >> 24;
+-      c->operand[9]  = ((params->frequency / 10) >> 16) & 0xff;
+-      c->operand[10] = ((params->frequency / 10) >>  8) & 0xff;
+-      c->operand[11] = (params->frequency / 10) & 0xff;
+-
+-      switch (ofdm->bandwidth) {
+-      case BANDWIDTH_7_MHZ:   c->operand[12] = 0x20; break;
+-      case BANDWIDTH_8_MHZ:
+-      case BANDWIDTH_6_MHZ:   /* not defined by AVC spec */
+-      case BANDWIDTH_AUTO:
+-      default:                c->operand[12] = 0x00;
+-      }
+-
+-      switch (ofdm->constellation) {
+-      case QAM_16:    c->operand[13] = 1 << 6; break;
+-      case QAM_64:    c->operand[13] = 2 << 6; break;
+-      case QPSK:
+-      default:        c->operand[13] = 0x00;
+-      }
+-
+-      switch (ofdm->hierarchy_information) {
+-      case HIERARCHY_1:       c->operand[13] |= 1 << 3; break;
+-      case HIERARCHY_2:       c->operand[13] |= 2 << 3; break;
+-      case HIERARCHY_4:       c->operand[13] |= 3 << 3; break;
+-      case HIERARCHY_AUTO:
+-      case HIERARCHY_NONE:
+-      default:                break;
+-      }
+-
+-      switch (ofdm->code_rate_HP) {
+-      case FEC_2_3:   c->operand[13] |= 1; break;
+-      case FEC_3_4:   c->operand[13] |= 2; break;
+-      case FEC_5_6:   c->operand[13] |= 3; break;
+-      case FEC_7_8:   c->operand[13] |= 4; break;
+-      case FEC_1_2:
+-      default:        break;
+-      }
+-
+-      switch (ofdm->code_rate_LP) {
+-      case FEC_2_3:   c->operand[14] = 1 << 5; break;
+-      case FEC_3_4:   c->operand[14] = 2 << 5; break;
+-      case FEC_5_6:   c->operand[14] = 3 << 5; break;
+-      case FEC_7_8:   c->operand[14] = 4 << 5; break;
+-      case FEC_1_2:
+-      default:        c->operand[14] = 0x00; break;
+-      }
+-
+-      switch (ofdm->guard_interval) {
+-      case GUARD_INTERVAL_1_16:       c->operand[14] |= 1 << 3; break;
+-      case GUARD_INTERVAL_1_8:        c->operand[14] |= 2 << 3; break;
+-      case GUARD_INTERVAL_1_4:        c->operand[14] |= 3 << 3; break;
+-      case GUARD_INTERVAL_1_32:
+-      case GUARD_INTERVAL_AUTO:
+-      default:                        break;
+-      }
+-
+-      switch (ofdm->transmission_mode) {
+-      case TRANSMISSION_MODE_8K:      c->operand[14] |= 1 << 1; break;
+-      case TRANSMISSION_MODE_2K:
+-      case TRANSMISSION_MODE_AUTO:
+-      default:                        break;
+-      }
+-
+-      c->operand[15] = 0x00; /* network_ID[0] */
+-      c->operand[16] = 0x00; /* network_ID[1] */
+-      /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+-      c->operand[17] = 0x00;
+-
+-      c->length = 24;
+-}
+-
+-int avc_tuner_dsd(struct firedtv *fdtv,
+-                struct dvb_frontend_parameters *params)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-
+-      switch (fdtv->type) {
+-      case FIREDTV_DVB_S:
+-      case FIREDTV_DVB_S2: avc_tuner_tuneqpsk(fdtv, params, c); break;
+-      case FIREDTV_DVB_C: avc_tuner_dsd_dvb_c(params, c); break;
+-      case FIREDTV_DVB_T: avc_tuner_dsd_dvb_t(params, c); break;
+-      default:
+-              BUG();
+-      }
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      msleep(500);
+-#if 0
+-      /* FIXME: */
+-      /* u8 *status was an out-parameter of avc_tuner_dsd, unused by caller */
+-      if (status)
+-              *status = r->operand[2];
+-#endif
+-      return 0;
+-}
+-
+-int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-      int pos, k;
+-
+-      if (pidc > 16 && pidc != 0xff)
+-              return -EINVAL;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_DSD;
+-
+-      c->operand[0] = 0;      /* source plug */
+-      c->operand[1] = 0xd2;   /* subfunction replace */
+-      c->operand[2] = 0x20;   /* system id = DVB */
+-      c->operand[3] = 0x00;   /* antenna number */
+-      c->operand[4] = 0x00;   /* system_specific_multiplex selection_length */
+-      c->operand[5] = pidc;   /* Nr_of_dsd_sel_specs */
+-
+-      pos = 6;
+-      if (pidc != 0xff)
+-              for (k = 0; k < pidc; k++) {
+-                      c->operand[pos++] = 0x13; /* flowfunction relay */
+-                      c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
+-                      c->operand[pos++] = (pid[k] >> 8) & 0x1f;
+-                      c->operand[pos++] = pid[k] & 0xff;
+-                      c->operand[pos++] = 0x00; /* tableID */
+-                      c->operand[pos++] = 0x00; /* filter_length */
+-              }
+-
+-      c->length = ALIGN(3 + pos, 4);
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      msleep(50);
+-      return 0;
+-}
+-
+-int avc_tuner_get_ts(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-      int sl;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_DSIT;
+-
+-      sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11;
+-
+-      c->operand[0] = 0;      /* source plug */
+-      c->operand[1] = 0xd2;   /* subfunction replace */
+-      c->operand[2] = 0xff;   /* status */
+-      c->operand[3] = 0x20;   /* system id = DVB */
+-      c->operand[4] = 0x00;   /* antenna number */
+-      c->operand[5] = 0x0;    /* system_specific_search_flags */
+-      c->operand[6] = sl;     /* system_specific_multiplex selection_length */
+-      c->operand[7] = 0x00;   /* valid_flags [0] */
+-      c->operand[8] = 0x00;   /* valid_flags [1] */
+-      c->operand[7 + sl] = 0x00; /* nr_of_dsit_sel_specs (always 0) */
+-
+-      c->length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      msleep(250);
+-      return 0;
+-}
+-
+-int avc_identify_subunit(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_READ_DESCRIPTOR;
+-
+-      c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER;
+-      c->operand[1] = 0xff;
+-      c->operand[2] = 0x00;
+-      c->operand[3] = 0x00; /* length highbyte */
+-      c->operand[4] = 0x08; /* length lowbyte  */
+-      c->operand[5] = 0x00; /* offset highbyte */
+-      c->operand[6] = 0x0d; /* offset lowbyte  */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      if ((r->response != AVC_RESPONSE_STABLE &&
+-           r->response != AVC_RESPONSE_ACCEPTED) ||
+-          (r->operand[3] << 8) + r->operand[4] != 8) {
+-              dev_err(fdtv->device, "cannot read subunit identifier\n");
+-              return -EINVAL;
+-      }
+-      return 0;
+-}
+-
+-#define SIZEOF_ANTENNA_INPUT_INFO 22
+-
+-int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-      int length;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_READ_DESCRIPTOR;
+-
+-      c->operand[0] = DESCRIPTOR_TUNER_STATUS;
+-      c->operand[1] = 0xff;   /* read_result_status */
+-      c->operand[2] = 0x00;   /* reserved */
+-      c->operand[3] = 0;      /* SIZEOF_ANTENNA_INPUT_INFO >> 8; */
+-      c->operand[4] = 0;      /* SIZEOF_ANTENNA_INPUT_INFO & 0xff; */
+-      c->operand[5] = 0x00;
+-      c->operand[6] = 0x00;
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      if (r->response != AVC_RESPONSE_STABLE &&
+-          r->response != AVC_RESPONSE_ACCEPTED) {
+-              dev_err(fdtv->device, "cannot read tuner status\n");
+-              return -EINVAL;
+-      }
+-
+-      length = r->operand[9];
+-      if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
+-              dev_err(fdtv->device, "got invalid tuner status\n");
+-              return -EINVAL;
+-      }
+-
+-      stat->active_system             = r->operand[10];
+-      stat->searching                 = r->operand[11] >> 7 & 1;
+-      stat->moving                    = r->operand[11] >> 6 & 1;
+-      stat->no_rf                     = r->operand[11] >> 5 & 1;
+-      stat->input                     = r->operand[12] >> 7 & 1;
+-      stat->selected_antenna          = r->operand[12] & 0x7f;
+-      stat->ber                       = r->operand[13] << 24 |
+-                                        r->operand[14] << 16 |
+-                                        r->operand[15] << 8 |
+-                                        r->operand[16];
+-      stat->signal_strength           = r->operand[17];
+-      stat->raster_frequency          = r->operand[18] >> 6 & 2;
+-      stat->rf_frequency              = (r->operand[18] & 0x3f) << 16 |
+-                                        r->operand[19] << 8 |
+-                                        r->operand[20];
+-      stat->man_dep_info_length       = r->operand[21];
+-      stat->front_end_error           = r->operand[22] >> 4 & 1;
+-      stat->antenna_error             = r->operand[22] >> 3 & 1;
+-      stat->front_end_power_status    = r->operand[22] >> 1 & 1;
+-      stat->power_supply              = r->operand[22] & 1;
+-      stat->carrier_noise_ratio       = r->operand[23] << 8 |
+-                                        r->operand[24];
+-      stat->power_supply_voltage      = r->operand[27];
+-      stat->antenna_voltage           = r->operand[28];
+-      stat->firewire_bus_voltage      = r->operand[29];
+-      stat->ca_mmi                    = r->operand[30] & 1;
+-      stat->ca_pmt_reply              = r->operand[31] >> 7 & 1;
+-      stat->ca_date_time_request      = r->operand[31] >> 6 & 1;
+-      stat->ca_application_info       = r->operand[31] >> 5 & 1;
+-      stat->ca_module_present_status  = r->operand[31] >> 4 & 1;
+-      stat->ca_dvb_flag               = r->operand[31] >> 3 & 1;
+-      stat->ca_error_flag             = r->operand[31] >> 2 & 1;
+-      stat->ca_initialization_status  = r->operand[31] >> 1 & 1;
+-
+-      return 0;
+-}
+-
+-int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+-                  char conttone, char nrdiseq,
+-                  struct dvb_diseqc_master_cmd *diseqcmd)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-      int i, j, k;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
+-
+-      c->operand[4] = voltage;
+-      c->operand[5] = nrdiseq;
+-
+-      i = 6;
+-
+-      for (j = 0; j < nrdiseq; j++) {
+-              c->operand[i++] = diseqcmd[j].msg_len;
+-
+-              for (k = 0; k < diseqcmd[j].msg_len; k++)
+-                      c->operand[i++] = diseqcmd[j].msg[k];
+-      }
+-
+-      c->operand[i++] = burst;
+-      c->operand[i++] = conttone;
+-
+-      c->length = ALIGN(3 + i, 4);
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      if (r->response != AVC_RESPONSE_ACCEPTED) {
+-              dev_err(fdtv->device, "LNB control failed\n");
+-              return -EINVAL;
+-      }
+-
+-      return 0;
+-}
+-
+-int avc_register_remote_control(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_NOTIFY;
+-      c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
+-
+-      c->length = 8;
+-
+-      return avc_write(fdtv, c, NULL);
+-}
+-
+-void avc_remote_ctrl_work(struct work_struct *work)
+-{
+-      struct firedtv *fdtv =
+-                      container_of(work, struct firedtv, remote_ctrl_work);
+-
+-      /* Should it be rescheduled in failure cases? */
+-      avc_register_remote_control(fdtv);
+-}
+-
+-#if 0 /* FIXME: unused */
+-int avc_tuner_host2ca(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+-      c->operand[6] = 0; /* more/last */
+-      c->operand[7] = 0; /* length */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      return 0;
+-}
+-#endif
+-
+-static int get_ca_object_pos(struct avc_response_frame *r)
+-{
+-      int length = 1;
+-
+-      /* Check length of length field */
+-      if (r->operand[7] & 0x80)
+-              length = (r->operand[7] & 0x7f) + 1;
+-      return length + 7;
+-}
+-
+-static int get_ca_object_length(struct avc_response_frame *r)
+-{
+-#if 0 /* FIXME: unused */
+-      int size = 0;
+-      int i;
+-
+-      if (r->operand[7] & 0x80)
+-              for (i = 0; i < (r->operand[7] & 0x7f); i++) {
+-                      size <<= 8;
+-                      size += r->operand[8 + i];
+-              }
+-#endif
+-      return r->operand[7];
+-}
+-
+-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-      int pos;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_STATUS;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      /* FIXME: check response code and validate response data */
+-
+-      pos = get_ca_object_pos(r);
+-      app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
+-      app_info[1] = (EN50221_TAG_APP_INFO >>  8) & 0xff;
+-      app_info[2] = (EN50221_TAG_APP_INFO >>  0) & 0xff;
+-      app_info[3] = 6 + r->operand[pos + 4];
+-      app_info[4] = 0x01;
+-      memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
+-      *len = app_info[3] + 4;
+-
+-      return 0;
+-}
+-
+-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-      int pos;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_STATUS;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      pos = get_ca_object_pos(r);
+-      app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
+-      app_info[1] = (EN50221_TAG_CA_INFO >>  8) & 0xff;
+-      app_info[2] = (EN50221_TAG_CA_INFO >>  0) & 0xff;
+-      app_info[3] = 2;
+-      app_info[4] = r->operand[pos + 0];
+-      app_info[5] = r->operand[pos + 1];
+-      *len = app_info[3] + 4;
+-
+-      return 0;
+-}
+-
+-int avc_ca_reset(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */
+-      c->operand[6] = 0; /* more/last */
+-      c->operand[7] = 1; /* length */
+-      c->operand[8] = 0; /* force hardware reset */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      return 0;
+-}
+-
+-int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-      int list_management;
+-      int program_info_length;
+-      int pmt_cmd_id;
+-      int read_pos;
+-      int write_pos;
+-      int es_info_length;
+-      int crc32_csum;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_CONTROL;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) {
+-              dev_info(fdtv->device, "forcing list_management to ONLY\n");
+-              msg[0] = EN50221_LIST_MANAGEMENT_ONLY;
+-      }
+-      /* We take the cmd_id from the programme level only! */
+-      list_management = msg[0];
+-      program_info_length = ((msg[4] & 0x0f) << 8) + msg[5];
+-      if (program_info_length > 0)
+-              program_info_length--; /* Remove pmt_cmd_id */
+-      pmt_cmd_id = msg[6];
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
+-      c->operand[6] = 0; /* more/last */
+-      /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */
+-      c->operand[8] = list_management;
+-      c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */
+-
+-      /* TS program map table */
+-
+-      c->operand[10] = 0x02; /* Table id=2 */
+-      c->operand[11] = 0x80; /* Section syntax + length */
+-      /* c->operand[12] = XXXprogram_info_length + 12; */
+-      c->operand[13] = msg[1]; /* Program number */
+-      c->operand[14] = msg[2];
+-      c->operand[15] = 0x01; /* Version number=0 + current/next=1 */
+-      c->operand[16] = 0x00; /* Section number=0 */
+-      c->operand[17] = 0x00; /* Last section number=0 */
+-      c->operand[18] = 0x1f; /* PCR_PID=1FFF */
+-      c->operand[19] = 0xff;
+-      c->operand[20] = (program_info_length >> 8); /* Program info length */
+-      c->operand[21] = (program_info_length & 0xff);
+-
+-      /* CA descriptors at programme level */
+-      read_pos = 6;
+-      write_pos = 22;
+-      if (program_info_length > 0) {
+-              pmt_cmd_id = msg[read_pos++];
+-              if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+-                      dev_err(fdtv->device,
+-                              "invalid pmt_cmd_id %d\n", pmt_cmd_id);
+-
+-              memcpy(&c->operand[write_pos], &msg[read_pos],
+-                     program_info_length);
+-              read_pos += program_info_length;
+-              write_pos += program_info_length;
+-      }
+-      while (read_pos < length) {
+-              c->operand[write_pos++] = msg[read_pos++];
+-              c->operand[write_pos++] = msg[read_pos++];
+-              c->operand[write_pos++] = msg[read_pos++];
+-              es_info_length =
+-                      ((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1];
+-              read_pos += 2;
+-              if (es_info_length > 0)
+-                      es_info_length--; /* Remove pmt_cmd_id */
+-              c->operand[write_pos++] = es_info_length >> 8;
+-              c->operand[write_pos++] = es_info_length & 0xff;
+-              if (es_info_length > 0) {
+-                      pmt_cmd_id = msg[read_pos++];
+-                      if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+-                              dev_err(fdtv->device, "invalid pmt_cmd_id %d "
+-                                      "at stream level\n", pmt_cmd_id);
+-
+-                      memcpy(&c->operand[write_pos], &msg[read_pos],
+-                             es_info_length);
+-                      read_pos += es_info_length;
+-                      write_pos += es_info_length;
+-              }
+-      }
+-
+-      /* CRC */
+-      c->operand[write_pos++] = 0x00;
+-      c->operand[write_pos++] = 0x00;
+-      c->operand[write_pos++] = 0x00;
+-      c->operand[write_pos++] = 0x00;
+-
+-      c->operand[7] = write_pos - 8;
+-      c->operand[12] = write_pos - 13;
+-
+-      crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
+-      c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
+-      c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
+-      c->operand[write_pos - 2] = (crc32_csum >>  8) & 0xff;
+-      c->operand[write_pos - 1] = (crc32_csum >>  0) & 0xff;
+-
+-      c->length = ALIGN(3 + write_pos, 4);
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      if (r->response != AVC_RESPONSE_ACCEPTED) {
+-              dev_err(fdtv->device,
+-                      "CA PMT failed with response 0x%x\n", r->response);
+-              return -EFAULT;
+-      }
+-
+-      return 0;
+-}
+-
+-int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_STATUS;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
+-      c->operand[6] = 0; /* more/last */
+-      c->operand[7] = 0; /* length */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      /* FIXME: check response code and validate response data */
+-
+-      *interval = r->operand[get_ca_object_pos(r)];
+-
+-      return 0;
+-}
+-
+-int avc_ca_enter_menu(struct firedtv *fdtv)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_STATUS;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
+-      c->operand[6] = 0; /* more/last */
+-      c->operand[7] = 0; /* length */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      return 0;
+-}
+-
+-int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
+-{
+-      char buffer[sizeof(struct avc_command_frame)];
+-      struct avc_command_frame *c = (void *)buffer;
+-      struct avc_response_frame *r = (void *)buffer;
+-
+-      memset(c, 0, sizeof(*c));
+-
+-      c->ctype   = AVC_CTYPE_STATUS;
+-      c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+-      c->opcode  = AVC_OPCODE_VENDOR;
+-
+-      c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+-      c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+-      c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+-      c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+-      c->operand[4] = 0; /* slot */
+-      c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
+-      c->operand[6] = 0; /* more/last */
+-      c->operand[7] = 0; /* length */
+-
+-      c->length = 12;
+-
+-      if (avc_write(fdtv, c, r) < 0)
+-              return -EIO;
+-
+-      /* FIXME: check response code and validate response data */
+-
+-      *len = get_ca_object_length(r);
+-      memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
+-
+-      return 0;
+-}
+-
+-#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
+-
+-static int cmp_read(struct firedtv *fdtv, void *buf, u64 addr, size_t len)
+-{
+-      int ret;
+-
+-      if (mutex_lock_interruptible(&fdtv->avc_mutex))
+-              return -EINTR;
+-
+-      ret = fdtv->backend->read(fdtv, addr, buf, len);
+-      if (ret < 0)
+-              dev_err(fdtv->device, "CMP: read I/O error\n");
+-
+-      mutex_unlock(&fdtv->avc_mutex);
+-      return ret;
+-}
+-
+-static int cmp_lock(struct firedtv *fdtv, void *data, u64 addr, __be32 arg)
+-{
+-      int ret;
+-
+-      if (mutex_lock_interruptible(&fdtv->avc_mutex))
+-              return -EINTR;
+-
+-      ret = fdtv->backend->lock(fdtv, addr, data, arg);
+-      if (ret < 0)
+-              dev_err(fdtv->device, "CMP: lock I/O error\n");
+-
+-      mutex_unlock(&fdtv->avc_mutex);
+-      return ret;
+-}
+-
+-static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift)
+-{
+-      return (be32_to_cpu(opcr) >> shift) & mask;
+-}
+-
+-static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift)
+-{
+-      *opcr &= ~cpu_to_be32(mask << shift);
+-      *opcr |= cpu_to_be32((value & mask) << shift);
+-}
+-
+-#define get_opcr_online(v)            get_opcr((v), 0x1, 31)
+-#define get_opcr_p2p_connections(v)   get_opcr((v), 0x3f, 24)
+-#define get_opcr_channel(v)           get_opcr((v), 0x3f, 16)
+-
+-#define set_opcr_p2p_connections(p, v)        set_opcr((p), (v), 0x3f, 24)
+-#define set_opcr_channel(p, v)                set_opcr((p), (v), 0x3f, 16)
+-#define set_opcr_data_rate(p, v)      set_opcr((p), (v), 0x3, 14)
+-#define set_opcr_overhead_id(p, v)    set_opcr((p), (v), 0xf, 10)
+-
+-int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
+-{
+-      __be32 old_opcr, opcr;
+-      u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+-      int attempts = 0;
+-      int ret;
+-
+-      ret = cmp_read(fdtv, &opcr, opcr_address, 4);
+-      if (ret < 0)
+-              return ret;
+-
+-repeat:
+-      if (!get_opcr_online(opcr)) {
+-              dev_err(fdtv->device, "CMP: output offline\n");
+-              return -EBUSY;
+-      }
+-
+-      old_opcr = opcr;
+-
+-      if (get_opcr_p2p_connections(opcr)) {
+-              if (get_opcr_channel(opcr) != channel) {
+-                      dev_err(fdtv->device, "CMP: cannot change channel\n");
+-                      return -EBUSY;
+-              }
+-              dev_info(fdtv->device, "CMP: overlaying connection\n");
+-
+-              /* We don't allocate isochronous resources. */
+-      } else {
+-              set_opcr_channel(&opcr, channel);
+-              set_opcr_data_rate(&opcr, 2); /* S400 */
+-
+-              /* FIXME: this is for the worst case - optimize */
+-              set_opcr_overhead_id(&opcr, 0);
+-
+-              /*
+-               * FIXME: allocate isochronous channel and bandwidth at IRM
+-               * fdtv->backend->alloc_resources(fdtv, channels_mask, bw);
+-               */
+-      }
+-
+-      set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) + 1);
+-
+-      ret = cmp_lock(fdtv, &opcr, opcr_address, old_opcr);
+-      if (ret < 0)
+-              return ret;
+-
+-      if (old_opcr != opcr) {
+-              /*
+-               * FIXME: if old_opcr.P2P_Connections > 0,
+-               * deallocate isochronous channel and bandwidth at IRM
+-               * if (...)
+-               *      fdtv->backend->dealloc_resources(fdtv, channel, bw);
+-               */
+-
+-              if (++attempts < 6) /* arbitrary limit */
+-                      goto repeat;
+-              return -EBUSY;
+-      }
+-
+-      return 0;
+-}
+-
+-void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
+-{
+-      __be32 old_opcr, opcr;
+-      u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+-      int attempts = 0;
+-
+-      if (cmp_read(fdtv, &opcr, opcr_address, 4) < 0)
+-              return;
+-
+-repeat:
+-      if (!get_opcr_online(opcr) || !get_opcr_p2p_connections(opcr) ||
+-          get_opcr_channel(opcr) != channel) {
+-              dev_err(fdtv->device, "CMP: no connection to break\n");
+-              return;
+-      }
+-
+-      old_opcr = opcr;
+-      set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) - 1);
+-
+-      if (cmp_lock(fdtv, &opcr, opcr_address, old_opcr) < 0)
+-              return;
+-
+-      if (old_opcr != opcr) {
+-              /*
+-               * FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
+-               * owner, deallocate isochronous channel and bandwidth at IRM
+-               * if (...)
+-               *      fdtv->backend->dealloc_resources(fdtv, channel, bw);
+-               */
+-
+-              if (++attempts < 6) /* arbitrary limit */
+-                      goto repeat;
+-      }
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-ci.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-ci.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-ci.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-ci.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,260 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/device.h>
+-#include <linux/dvb/ca.h>
+-#include <linux/fs.h>
+-#include <linux/module.h>
+-
+-#include <dvbdev.h>
+-
+-#include "firedtv.h"
+-
+-#define EN50221_TAG_APP_INFO_ENQUIRY  0x9f8020
+-#define EN50221_TAG_CA_INFO_ENQUIRY   0x9f8030
+-#define EN50221_TAG_CA_PMT            0x9f8032
+-#define EN50221_TAG_ENTER_MENU                0x9f8022
+-
+-static int fdtv_ca_ready(struct firedtv_tuner_status *stat)
+-{
+-      return stat->ca_initialization_status   == 1 &&
+-             stat->ca_error_flag              == 0 &&
+-             stat->ca_dvb_flag                == 1 &&
+-             stat->ca_module_present_status   == 1;
+-}
+-
+-static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
+-{
+-      int flags = 0;
+-
+-      if (stat->ca_module_present_status == 1)
+-              flags |= CA_CI_MODULE_PRESENT;
+-      if (stat->ca_initialization_status == 1 &&
+-          stat->ca_error_flag            == 0 &&
+-          stat->ca_dvb_flag              == 1)
+-              flags |= CA_CI_MODULE_READY;
+-      return flags;
+-}
+-
+-static int fdtv_ca_reset(struct firedtv *fdtv)
+-{
+-      return avc_ca_reset(fdtv) ? -EFAULT : 0;
+-}
+-
+-static int fdtv_ca_get_caps(void *arg)
+-{
+-      struct ca_caps *cap = arg;
+-
+-      cap->slot_num = 1;
+-      cap->slot_type = CA_CI;
+-      cap->descr_num = 1;
+-      cap->descr_type = CA_ECD;
+-      return 0;
+-}
+-
+-static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
+-{
+-      struct firedtv_tuner_status stat;
+-      struct ca_slot_info *slot = arg;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EFAULT;
+-
+-      if (slot->num != 0)
+-              return -EFAULT;
+-
+-      slot->type = CA_CI;
+-      slot->flags = fdtv_get_ca_flags(&stat);
+-      return 0;
+-}
+-
+-static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
+-{
+-      struct ca_msg *reply = arg;
+-
+-      return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+-}
+-
+-static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
+-{
+-      struct ca_msg *reply = arg;
+-
+-      return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+-}
+-
+-static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
+-{
+-      struct ca_msg *reply = arg;
+-
+-      return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+-}
+-
+-static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
+-{
+-      struct firedtv_tuner_status stat;
+-      int err;
+-
+-      switch (fdtv->ca_last_command) {
+-      case EN50221_TAG_APP_INFO_ENQUIRY:
+-              err = fdtv_ca_app_info(fdtv, arg);
+-              break;
+-      case EN50221_TAG_CA_INFO_ENQUIRY:
+-              err = fdtv_ca_info(fdtv, arg);
+-              break;
+-      default:
+-              if (avc_tuner_status(fdtv, &stat))
+-                      err = -EFAULT;
+-              else if (stat.ca_mmi == 1)
+-                      err = fdtv_ca_get_mmi(fdtv, arg);
+-              else {
+-                      dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
+-                               fdtv->ca_last_command);
+-                      err = -EFAULT;
+-              }
+-      }
+-      fdtv->ca_last_command = 0;
+-      return err;
+-}
+-
+-static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
+-{
+-      struct ca_msg *msg = arg;
+-      int data_pos;
+-      int data_length;
+-      int i;
+-
+-      data_pos = 4;
+-      if (msg->msg[3] & 0x80) {
+-              data_length = 0;
+-              for (i = 0; i < (msg->msg[3] & 0x7f); i++)
+-                      data_length = (data_length << 8) + msg->msg[data_pos++];
+-      } else {
+-              data_length = msg->msg[3];
+-      }
+-
+-      return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0;
+-}
+-
+-static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
+-{
+-      struct ca_msg *msg = arg;
+-      int err;
+-
+-      /* Do we need a semaphore for this? */
+-      fdtv->ca_last_command =
+-              (msg->msg[0] << 16) + (msg->msg[1] << 8) + msg->msg[2];
+-      switch (fdtv->ca_last_command) {
+-      case EN50221_TAG_CA_PMT:
+-              err = fdtv_ca_pmt(fdtv, arg);
+-              break;
+-      case EN50221_TAG_APP_INFO_ENQUIRY:
+-              /* handled in ca_get_msg */
+-              err = 0;
+-              break;
+-      case EN50221_TAG_CA_INFO_ENQUIRY:
+-              /* handled in ca_get_msg */
+-              err = 0;
+-              break;
+-      case EN50221_TAG_ENTER_MENU:
+-              err = avc_ca_enter_menu(fdtv);
+-              break;
+-      default:
+-              dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
+-                      fdtv->ca_last_command);
+-              err = -EFAULT;
+-      }
+-      return err;
+-}
+-
+-static int fdtv_ca_ioctl(struct inode *inode, struct file *file,
+-                          unsigned int cmd, void *arg)
+-{
+-      struct dvb_device *dvbdev = file->private_data;
+-      struct firedtv *fdtv = dvbdev->priv;
+-      struct firedtv_tuner_status stat;
+-      int err;
+-
+-      switch (cmd) {
+-      case CA_RESET:
+-              err = fdtv_ca_reset(fdtv);
+-              break;
+-      case CA_GET_CAP:
+-              err = fdtv_ca_get_caps(arg);
+-              break;
+-      case CA_GET_SLOT_INFO:
+-              err = fdtv_ca_get_slot_info(fdtv, arg);
+-              break;
+-      case CA_GET_MSG:
+-              err = fdtv_ca_get_msg(fdtv, arg);
+-              break;
+-      case CA_SEND_MSG:
+-              err = fdtv_ca_send_msg(fdtv, arg);
+-              break;
+-      default:
+-              dev_info(fdtv->device, "unhandled CA ioctl %u\n", cmd);
+-              err = -EOPNOTSUPP;
+-      }
+-
+-      /* FIXME Is this necessary? */
+-      avc_tuner_status(fdtv, &stat);
+-
+-      return err;
+-}
+-
+-static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
+-{
+-      return POLLIN;
+-}
+-
+-static struct file_operations fdtv_ca_fops = {
+-      .owner          = THIS_MODULE,
+-      .ioctl          = dvb_generic_ioctl,
+-      .open           = dvb_generic_open,
+-      .release        = dvb_generic_release,
+-      .poll           = fdtv_ca_io_poll,
+-};
+-
+-static struct dvb_device fdtv_ca = {
+-      .users          = 1,
+-      .readers        = 1,
+-      .writers        = 1,
+-      .fops           = &fdtv_ca_fops,
+-      .kernel_ioctl   = fdtv_ca_ioctl,
+-};
+-
+-int fdtv_ca_register(struct firedtv *fdtv)
+-{
+-      struct firedtv_tuner_status stat;
+-      int err;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EINVAL;
+-
+-      if (!fdtv_ca_ready(&stat))
+-              return -EFAULT;
+-
+-      err = dvb_register_device(&fdtv->adapter, &fdtv->cadev,
+-                                &fdtv_ca, fdtv, DVB_DEVICE_CA);
+-
+-      if (stat.ca_application_info == 0)
+-              dev_err(fdtv->device, "CaApplicationInfo is not set\n");
+-      if (stat.ca_date_time_request == 1)
+-              avc_ca_get_time_date(fdtv, &fdtv->ca_time_interval);
+-
+-      return err;
+-}
+-
+-void fdtv_ca_release(struct firedtv *fdtv)
+-{
+-      if (fdtv->cadev)
+-              dvb_unregister_device(fdtv->cadev);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-dvb.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-dvb.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-dvb.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-dvb.c     1970-01-01 01:00:00.000000000 +0100
+@@ -1,364 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/bitops.h>
+-#include <linux/device.h>
+-#include <linux/errno.h>
+-#include <linux/kernel.h>
+-#include <linux/mod_devicetable.h>
+-#include <linux/module.h>
+-#include <linux/mutex.h>
+-#include <linux/slab.h>
+-#include <linux/string.h>
+-#include <linux/types.h>
+-#include <linux/wait.h>
+-#include <linux/workqueue.h>
+-
+-#include <dmxdev.h>
+-#include <dvb_demux.h>
+-#include <dvbdev.h>
+-#include <dvb_frontend.h>
+-
+-#include "firedtv.h"
+-
+-static int alloc_channel(struct firedtv *fdtv)
+-{
+-      int i;
+-
+-      for (i = 0; i < 16; i++)
+-              if (!__test_and_set_bit(i, &fdtv->channel_active))
+-                      break;
+-      return i;
+-}
+-
+-static void collect_channels(struct firedtv *fdtv, int *pidc, u16 pid[])
+-{
+-      int i, n;
+-
+-      for (i = 0, n = 0; i < 16; i++)
+-              if (test_bit(i, &fdtv->channel_active))
+-                      pid[n++] = fdtv->channel_pid[i];
+-      *pidc = n;
+-}
+-
+-static inline void dealloc_channel(struct firedtv *fdtv, int i)
+-{
+-      __clear_bit(i, &fdtv->channel_active);
+-}
+-
+-int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+-{
+-      struct firedtv *fdtv = dvbdmxfeed->demux->priv;
+-      int pidc, c, ret;
+-      u16 pids[16];
+-
+-      switch (dvbdmxfeed->type) {
+-      case DMX_TYPE_TS:
+-      case DMX_TYPE_SEC:
+-              break;
+-      default:
+-              dev_err(fdtv->device, "can't start dmx feed: invalid type %u\n",
+-                      dvbdmxfeed->type);
+-              return -EINVAL;
+-      }
+-
+-      if (mutex_lock_interruptible(&fdtv->demux_mutex))
+-              return -EINTR;
+-
+-      if (dvbdmxfeed->type == DMX_TYPE_TS) {
+-              switch (dvbdmxfeed->pes_type) {
+-              case DMX_TS_PES_VIDEO:
+-              case DMX_TS_PES_AUDIO:
+-              case DMX_TS_PES_TELETEXT:
+-              case DMX_TS_PES_PCR:
+-              case DMX_TS_PES_OTHER:
+-                      c = alloc_channel(fdtv);
+-                      break;
+-              default:
+-                      dev_err(fdtv->device,
+-                              "can't start dmx feed: invalid pes type %u\n",
+-                              dvbdmxfeed->pes_type);
+-                      ret = -EINVAL;
+-                      goto out;
+-              }
+-      } else {
+-              c = alloc_channel(fdtv);
+-      }
+-
+-      if (c > 15) {
+-              dev_err(fdtv->device, "can't start dmx feed: busy\n");
+-              ret = -EBUSY;
+-              goto out;
+-      }
+-
+-      dvbdmxfeed->priv = (typeof(dvbdmxfeed->priv))(unsigned long)c;
+-      fdtv->channel_pid[c] = dvbdmxfeed->pid;
+-      collect_channels(fdtv, &pidc, pids);
+-
+-      if (dvbdmxfeed->pid == 8192) {
+-              ret = avc_tuner_get_ts(fdtv);
+-              if (ret) {
+-                      dealloc_channel(fdtv, c);
+-                      dev_err(fdtv->device, "can't get TS\n");
+-                      goto out;
+-              }
+-      } else {
+-              ret = avc_tuner_set_pids(fdtv, pidc, pids);
+-              if (ret) {
+-                      dealloc_channel(fdtv, c);
+-                      dev_err(fdtv->device, "can't set PIDs\n");
+-                      goto out;
+-              }
+-      }
+-out:
+-      mutex_unlock(&fdtv->demux_mutex);
+-
+-      return ret;
+-}
+-
+-int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+-{
+-      struct dvb_demux *demux = dvbdmxfeed->demux;
+-      struct firedtv *fdtv = demux->priv;
+-      int pidc, c, ret;
+-      u16 pids[16];
+-
+-      if (dvbdmxfeed->type == DMX_TYPE_TS &&
+-          !((dvbdmxfeed->ts_type & TS_PACKET) &&
+-            (demux->dmx.frontend->source != DMX_MEMORY_FE))) {
+-
+-              if (dvbdmxfeed->ts_type & TS_DECODER) {
+-                      if (dvbdmxfeed->pes_type >= DMX_TS_PES_OTHER ||
+-                          !demux->pesfilter[dvbdmxfeed->pes_type])
+-                              return -EINVAL;
+-
+-                      demux->pids[dvbdmxfeed->pes_type] |= 0x8000;
+-                      demux->pesfilter[dvbdmxfeed->pes_type] = NULL;
+-              }
+-
+-              if (!(dvbdmxfeed->ts_type & TS_DECODER &&
+-                    dvbdmxfeed->pes_type < DMX_TS_PES_OTHER))
+-                      return 0;
+-      }
+-
+-      if (mutex_lock_interruptible(&fdtv->demux_mutex))
+-              return -EINTR;
+-
+-      c = (unsigned long)dvbdmxfeed->priv;
+-      dealloc_channel(fdtv, c);
+-      collect_channels(fdtv, &pidc, pids);
+-
+-      ret = avc_tuner_set_pids(fdtv, pidc, pids);
+-
+-      mutex_unlock(&fdtv->demux_mutex);
+-
+-      return ret;
+-}
+-
+-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+-
+-int fdtv_dvb_register(struct firedtv *fdtv)
+-{
+-      int err;
+-
+-      err = dvb_register_adapter(&fdtv->adapter, fdtv_model_names[fdtv->type],
+-                                 THIS_MODULE, fdtv->device, adapter_nr);
+-      if (err < 0)
+-              goto fail_log;
+-
+-      /*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/
+-      fdtv->demux.dmx.capabilities = 0;
+-
+-      fdtv->demux.priv        = fdtv;
+-      fdtv->demux.filternum   = 16;
+-      fdtv->demux.feednum     = 16;
+-      fdtv->demux.start_feed  = fdtv_start_feed;
+-      fdtv->demux.stop_feed   = fdtv_stop_feed;
+-      fdtv->demux.write_to_decoder = NULL;
+-
+-      err = dvb_dmx_init(&fdtv->demux);
+-      if (err)
+-              goto fail_unreg_adapter;
+-
+-      fdtv->dmxdev.filternum    = 16;
+-      fdtv->dmxdev.demux        = &fdtv->demux.dmx;
+-      fdtv->dmxdev.capabilities = 0;
+-
+-      err = dvb_dmxdev_init(&fdtv->dmxdev, &fdtv->adapter);
+-      if (err)
+-              goto fail_dmx_release;
+-
+-      fdtv->frontend.source = DMX_FRONTEND_0;
+-
+-      err = fdtv->demux.dmx.add_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+-      if (err)
+-              goto fail_dmxdev_release;
+-
+-      err = fdtv->demux.dmx.connect_frontend(&fdtv->demux.dmx,
+-                                             &fdtv->frontend);
+-      if (err)
+-              goto fail_rem_frontend;
+-
+-      dvb_net_init(&fdtv->adapter, &fdtv->dvbnet, &fdtv->demux.dmx);
+-
+-      fdtv_frontend_init(fdtv);
+-      err = dvb_register_frontend(&fdtv->adapter, &fdtv->fe);
+-      if (err)
+-              goto fail_net_release;
+-
+-      err = fdtv_ca_register(fdtv);
+-      if (err)
+-              dev_info(fdtv->device,
+-                       "Conditional Access Module not enabled\n");
+-      return 0;
+-
+-fail_net_release:
+-      dvb_net_release(&fdtv->dvbnet);
+-      fdtv->demux.dmx.close(&fdtv->demux.dmx);
+-fail_rem_frontend:
+-      fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+-fail_dmxdev_release:
+-      dvb_dmxdev_release(&fdtv->dmxdev);
+-fail_dmx_release:
+-      dvb_dmx_release(&fdtv->demux);
+-fail_unreg_adapter:
+-      dvb_unregister_adapter(&fdtv->adapter);
+-fail_log:
+-      dev_err(fdtv->device, "DVB initialization failed\n");
+-      return err;
+-}
+-
+-void fdtv_dvb_unregister(struct firedtv *fdtv)
+-{
+-      fdtv_ca_release(fdtv);
+-      dvb_unregister_frontend(&fdtv->fe);
+-      dvb_net_release(&fdtv->dvbnet);
+-      fdtv->demux.dmx.close(&fdtv->demux.dmx);
+-      fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+-      dvb_dmxdev_release(&fdtv->dmxdev);
+-      dvb_dmx_release(&fdtv->demux);
+-      dvb_unregister_adapter(&fdtv->adapter);
+-}
+-
+-const char *fdtv_model_names[] = {
+-      [FIREDTV_UNKNOWN] = "unknown type",
+-      [FIREDTV_DVB_S]   = "FireDTV S/CI",
+-      [FIREDTV_DVB_C]   = "FireDTV C/CI",
+-      [FIREDTV_DVB_T]   = "FireDTV T/CI",
+-      [FIREDTV_DVB_S2]  = "FireDTV S2  ",
+-};
+-
+-struct firedtv *fdtv_alloc(struct device *dev,
+-                         const struct firedtv_backend *backend,
+-                         const char *name, size_t name_len)
+-{
+-      struct firedtv *fdtv;
+-      int i;
+-
+-      fdtv = kzalloc(sizeof(*fdtv), GFP_KERNEL);
+-      if (!fdtv)
+-              return NULL;
+-
+-      dev->driver_data        = fdtv;
+-      fdtv->device            = dev;
+-      fdtv->isochannel        = -1;
+-      fdtv->voltage           = 0xff;
+-      fdtv->tone              = 0xff;
+-      fdtv->backend           = backend;
+-
+-      mutex_init(&fdtv->avc_mutex);
+-      init_waitqueue_head(&fdtv->avc_wait);
+-      fdtv->avc_reply_received = true;
+-      mutex_init(&fdtv->demux_mutex);
+-      INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work);
+-
+-      for (i = ARRAY_SIZE(fdtv_model_names); --i; )
+-              if (strlen(fdtv_model_names[i]) <= name_len &&
+-                  strncmp(name, fdtv_model_names[i], name_len) == 0)
+-                      break;
+-      fdtv->type = i;
+-
+-      return fdtv;
+-}
+-
+-#define MATCH_FLAGS (IEEE1394_MATCH_VENDOR_ID | IEEE1394_MATCH_MODEL_ID | \
+-                   IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION)
+-
+-#define DIGITAL_EVERYWHERE_OUI        0x001287
+-#define AVC_UNIT_SPEC_ID_ENTRY        0x00a02d
+-#define AVC_SW_VERSION_ENTRY  0x010001
+-
+-static struct ieee1394_device_id fdtv_id_table[] = {
+-      {
+-              /* FloppyDTV S/CI and FloppyDTV S2 */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000024,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {
+-              /* FloppyDTV T/CI */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000025,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {
+-              /* FloppyDTV C/CI */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000026,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {
+-              /* FireDTV S/CI and FloppyDTV S2 */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000034,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {
+-              /* FireDTV T/CI */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000035,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {
+-              /* FireDTV C/CI */
+-              .match_flags    = MATCH_FLAGS,
+-              .vendor_id      = DIGITAL_EVERYWHERE_OUI,
+-              .model_id       = 0x000036,
+-              .specifier_id   = AVC_UNIT_SPEC_ID_ENTRY,
+-              .version        = AVC_SW_VERSION_ENTRY,
+-      }, {}
+-};
+-MODULE_DEVICE_TABLE(ieee1394, fdtv_id_table);
+-
+-static int __init fdtv_init(void)
+-{
+-      return fdtv_1394_init(fdtv_id_table);
+-}
+-
+-static void __exit fdtv_exit(void)
+-{
+-      fdtv_1394_exit();
+-}
+-
+-module_init(fdtv_init);
+-module_exit(fdtv_exit);
+-
+-MODULE_AUTHOR("Andreas Monitzer <andy@monitzer.com>");
+-MODULE_AUTHOR("Ben Backx <ben@bbackx.com>");
+-MODULE_DESCRIPTION("FireDTV DVB Driver");
+-MODULE_LICENSE("GPL");
+-MODULE_SUPPORTED_DEVICE("FireDTV DVB");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-fe.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-fe.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-fe.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-fe.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,247 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/device.h>
+-#include <linux/errno.h>
+-#include <linux/kernel.h>
+-#include <linux/string.h>
+-#include <linux/types.h>
+-
+-#include <dvb_frontend.h>
+-
+-#include "firedtv.h"
+-
+-static int fdtv_dvb_init(struct dvb_frontend *fe)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-      int err;
+-
+-      /* FIXME - allocate free channel at IRM */
+-      fdtv->isochannel = fdtv->adapter.num;
+-
+-      err = cmp_establish_pp_connection(fdtv, fdtv->subunit,
+-                                        fdtv->isochannel);
+-      if (err) {
+-              dev_err(fdtv->device,
+-                      "could not establish point to point connection\n");
+-              return err;
+-      }
+-
+-      return fdtv->backend->start_iso(fdtv);
+-}
+-
+-static int fdtv_sleep(struct dvb_frontend *fe)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-
+-      fdtv->backend->stop_iso(fdtv);
+-      cmp_break_pp_connection(fdtv, fdtv->subunit, fdtv->isochannel);
+-      fdtv->isochannel = -1;
+-      return 0;
+-}
+-
+-#define LNBCONTROL_DONTCARE 0xff
+-
+-static int fdtv_diseqc_send_master_cmd(struct dvb_frontend *fe,
+-                                     struct dvb_diseqc_master_cmd *cmd)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-
+-      return avc_lnb_control(fdtv, LNBCONTROL_DONTCARE, LNBCONTROL_DONTCARE,
+-                             LNBCONTROL_DONTCARE, 1, cmd);
+-}
+-
+-static int fdtv_diseqc_send_burst(struct dvb_frontend *fe,
+-                                fe_sec_mini_cmd_t minicmd)
+-{
+-      return 0;
+-}
+-
+-static int fdtv_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-
+-      fdtv->tone = tone;
+-      return 0;
+-}
+-
+-static int fdtv_set_voltage(struct dvb_frontend *fe,
+-                          fe_sec_voltage_t voltage)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-
+-      fdtv->voltage = voltage;
+-      return 0;
+-}
+-
+-static int fdtv_read_status(struct dvb_frontend *fe, fe_status_t *status)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-      struct firedtv_tuner_status stat;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EINVAL;
+-
+-      if (stat.no_rf)
+-              *status = 0;
+-      else
+-              *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | FE_HAS_SYNC |
+-                        FE_HAS_CARRIER | FE_HAS_LOCK;
+-      return 0;
+-}
+-
+-static int fdtv_read_ber(struct dvb_frontend *fe, u32 *ber)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-      struct firedtv_tuner_status stat;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EINVAL;
+-
+-      *ber = stat.ber;
+-      return 0;
+-}
+-
+-static int fdtv_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-      struct firedtv_tuner_status stat;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EINVAL;
+-
+-      *strength = stat.signal_strength << 8;
+-      return 0;
+-}
+-
+-static int fdtv_read_snr(struct dvb_frontend *fe, u16 *snr)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-      struct firedtv_tuner_status stat;
+-
+-      if (avc_tuner_status(fdtv, &stat))
+-              return -EINVAL;
+-
+-      /* C/N[dB] = -10 * log10(snr / 65535) */
+-      *snr = stat.carrier_noise_ratio * 257;
+-      return 0;
+-}
+-
+-static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks)
+-{
+-      return -EOPNOTSUPP;
+-}
+-
+-#define ACCEPTED 0x9
+-
+-static int fdtv_set_frontend(struct dvb_frontend *fe,
+-                           struct dvb_frontend_parameters *params)
+-{
+-      struct firedtv *fdtv = fe->sec_priv;
+-
+-      /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */
+-      if (avc_tuner_dsd(fdtv, params) != ACCEPTED)
+-              return -EINVAL;
+-      else
+-              return 0; /* not sure of this... */
+-}
+-
+-static int fdtv_get_frontend(struct dvb_frontend *fe,
+-                           struct dvb_frontend_parameters *params)
+-{
+-      return -EOPNOTSUPP;
+-}
+-
+-void fdtv_frontend_init(struct firedtv *fdtv)
+-{
+-      struct dvb_frontend_ops *ops = &fdtv->fe.ops;
+-      struct dvb_frontend_info *fi = &ops->info;
+-
+-      ops->init                       = fdtv_dvb_init;
+-      ops->sleep                      = fdtv_sleep;
+-
+-      ops->set_frontend               = fdtv_set_frontend;
+-      ops->get_frontend               = fdtv_get_frontend;
+-
+-      ops->read_status                = fdtv_read_status;
+-      ops->read_ber                   = fdtv_read_ber;
+-      ops->read_signal_strength       = fdtv_read_signal_strength;
+-      ops->read_snr                   = fdtv_read_snr;
+-      ops->read_ucblocks              = fdtv_read_uncorrected_blocks;
+-
+-      ops->diseqc_send_master_cmd     = fdtv_diseqc_send_master_cmd;
+-      ops->diseqc_send_burst          = fdtv_diseqc_send_burst;
+-      ops->set_tone                   = fdtv_set_tone;
+-      ops->set_voltage                = fdtv_set_voltage;
+-
+-      switch (fdtv->type) {
+-      case FIREDTV_DVB_S:
+-      case FIREDTV_DVB_S2:
+-              fi->type                = FE_QPSK;
+-
+-              fi->frequency_min       = 950000;
+-              fi->frequency_max       = 2150000;
+-              fi->frequency_stepsize  = 125;
+-              fi->symbol_rate_min     = 1000000;
+-              fi->symbol_rate_max     = 40000000;
+-
+-              fi->caps                = FE_CAN_INVERSION_AUTO |
+-                                        FE_CAN_FEC_1_2        |
+-                                        FE_CAN_FEC_2_3        |
+-                                        FE_CAN_FEC_3_4        |
+-                                        FE_CAN_FEC_5_6        |
+-                                        FE_CAN_FEC_7_8        |
+-                                        FE_CAN_FEC_AUTO       |
+-                                        FE_CAN_QPSK;
+-              break;
+-
+-      case FIREDTV_DVB_C:
+-              fi->type                = FE_QAM;
+-
+-              fi->frequency_min       = 47000000;
+-              fi->frequency_max       = 866000000;
+-              fi->frequency_stepsize  = 62500;
+-              fi->symbol_rate_min     = 870000;
+-              fi->symbol_rate_max     = 6900000;
+-
+-              fi->caps                = FE_CAN_INVERSION_AUTO |
+-                                        FE_CAN_QAM_16         |
+-                                        FE_CAN_QAM_32         |
+-                                        FE_CAN_QAM_64         |
+-                                        FE_CAN_QAM_128        |
+-                                        FE_CAN_QAM_256        |
+-                                        FE_CAN_QAM_AUTO;
+-              break;
+-
+-      case FIREDTV_DVB_T:
+-              fi->type                = FE_OFDM;
+-
+-              fi->frequency_min       = 49000000;
+-              fi->frequency_max       = 861000000;
+-              fi->frequency_stepsize  = 62500;
+-
+-              fi->caps                = FE_CAN_INVERSION_AUTO         |
+-                                        FE_CAN_FEC_2_3                |
+-                                        FE_CAN_TRANSMISSION_MODE_AUTO |
+-                                        FE_CAN_GUARD_INTERVAL_AUTO    |
+-                                        FE_CAN_HIERARCHY_AUTO;
+-              break;
+-
+-      default:
+-              dev_err(fdtv->device, "no frontend for model type %d\n",
+-                      fdtv->type);
+-      }
+-      strcpy(fi->name, fdtv_model_names[fdtv->type]);
+-
+-      fdtv->fe.dvb = &fdtv->adapter;
+-      fdtv->fe.sec_priv = fdtv;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv.h linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv.h
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,182 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#ifndef _FIREDTV_H
+-#define _FIREDTV_H
+-
+-#include <linux/dvb/dmx.h>
+-#include <linux/dvb/frontend.h>
+-#include <linux/list.h>
+-#include <linux/mutex.h>
+-#include <linux/spinlock_types.h>
+-#include <linux/types.h>
+-#include <linux/wait.h>
+-#include <linux/workqueue.h>
+-
+-#include <demux.h>
+-#include <dmxdev.h>
+-#include <dvb_demux.h>
+-#include <dvb_frontend.h>
+-#include <dvb_net.h>
+-#include <dvbdev.h>
+-
+-struct firedtv_tuner_status {
+-      unsigned active_system:8;
+-      unsigned searching:1;
+-      unsigned moving:1;
+-      unsigned no_rf:1;
+-      unsigned input:1;
+-      unsigned selected_antenna:7;
+-      unsigned ber:32;
+-      unsigned signal_strength:8;
+-      unsigned raster_frequency:2;
+-      unsigned rf_frequency:22;
+-      unsigned man_dep_info_length:8;
+-      unsigned front_end_error:1;
+-      unsigned antenna_error:1;
+-      unsigned front_end_power_status:1;
+-      unsigned power_supply:1;
+-      unsigned carrier_noise_ratio:16;
+-      unsigned power_supply_voltage:8;
+-      unsigned antenna_voltage:8;
+-      unsigned firewire_bus_voltage:8;
+-      unsigned ca_mmi:1;
+-      unsigned ca_pmt_reply:1;
+-      unsigned ca_date_time_request:1;
+-      unsigned ca_application_info:1;
+-      unsigned ca_module_present_status:1;
+-      unsigned ca_dvb_flag:1;
+-      unsigned ca_error_flag:1;
+-      unsigned ca_initialization_status:1;
+-};
+-
+-enum model_type {
+-      FIREDTV_UNKNOWN = 0,
+-      FIREDTV_DVB_S   = 1,
+-      FIREDTV_DVB_C   = 2,
+-      FIREDTV_DVB_T   = 3,
+-      FIREDTV_DVB_S2  = 4,
+-};
+-
+-struct device;
+-struct input_dev;
+-struct firedtv;
+-
+-struct firedtv_backend {
+-      int (*lock)(struct firedtv *fdtv, u64 addr, void *data, __be32 arg);
+-      int (*read)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+-      int (*write)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+-      int (*start_iso)(struct firedtv *fdtv);
+-      void (*stop_iso)(struct firedtv *fdtv);
+-};
+-
+-struct firedtv {
+-      struct device *device;
+-      struct list_head list;
+-
+-      struct dvb_adapter      adapter;
+-      struct dmxdev           dmxdev;
+-      struct dvb_demux        demux;
+-      struct dmx_frontend     frontend;
+-      struct dvb_net          dvbnet;
+-      struct dvb_frontend     fe;
+-
+-      struct dvb_device       *cadev;
+-      int                     ca_last_command;
+-      int                     ca_time_interval;
+-
+-      struct mutex            avc_mutex;
+-      wait_queue_head_t       avc_wait;
+-      bool                    avc_reply_received;
+-      struct work_struct      remote_ctrl_work;
+-      struct input_dev        *remote_ctrl_dev;
+-
+-      enum model_type         type;
+-      char                    subunit;
+-      char                    isochannel;
+-      fe_sec_voltage_t        voltage;
+-      fe_sec_tone_mode_t      tone;
+-
+-      const struct firedtv_backend *backend;
+-      void                    *backend_data;
+-
+-      struct mutex            demux_mutex;
+-      unsigned long           channel_active;
+-      u16                     channel_pid[16];
+-
+-      size_t                  response_length;
+-      u8                      response[512];
+-};
+-
+-/* firedtv-1394.c */
+-#ifdef CONFIG_DVB_FIREDTV_IEEE1394
+-int fdtv_1394_init(struct ieee1394_device_id id_table[]);
+-void fdtv_1394_exit(void);
+-#else
+-static inline int fdtv_1394_init(struct ieee1394_device_id it[]) { return 0; }
+-static inline void fdtv_1394_exit(void) {}
+-#endif
+-
+-/* firedtv-avc.c */
+-int avc_recv(struct firedtv *fdtv, void *data, size_t length);
+-int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat);
+-struct dvb_frontend_parameters;
+-int avc_tuner_dsd(struct firedtv *fdtv, struct dvb_frontend_parameters *params);
+-int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]);
+-int avc_tuner_get_ts(struct firedtv *fdtv);
+-int avc_identify_subunit(struct firedtv *fdtv);
+-struct dvb_diseqc_master_cmd;
+-int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+-                  char conttone, char nrdiseq,
+-                  struct dvb_diseqc_master_cmd *diseqcmd);
+-void avc_remote_ctrl_work(struct work_struct *work);
+-int avc_register_remote_control(struct firedtv *fdtv);
+-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+-int avc_ca_reset(struct firedtv *fdtv);
+-int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length);
+-int avc_ca_get_time_date(struct firedtv *fdtv, int *interval);
+-int avc_ca_enter_menu(struct firedtv *fdtv);
+-int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len);
+-int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel);
+-void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel);
+-
+-/* firedtv-ci.c */
+-int fdtv_ca_register(struct firedtv *fdtv);
+-void fdtv_ca_release(struct firedtv *fdtv);
+-
+-/* firedtv-dvb.c */
+-int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed);
+-int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
+-int fdtv_dvb_register(struct firedtv *fdtv);
+-void fdtv_dvb_unregister(struct firedtv *fdtv);
+-struct firedtv *fdtv_alloc(struct device *dev,
+-                         const struct firedtv_backend *backend,
+-                         const char *name, size_t name_len);
+-extern const char *fdtv_model_names[];
+-
+-/* firedtv-fe.c */
+-void fdtv_frontend_init(struct firedtv *fdtv);
+-
+-/* firedtv-rc.c */
+-#ifdef CONFIG_DVB_FIREDTV_INPUT
+-int fdtv_register_rc(struct firedtv *fdtv, struct device *dev);
+-void fdtv_unregister_rc(struct firedtv *fdtv);
+-void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code);
+-#else
+-static inline int fdtv_register_rc(struct firedtv *fdtv,
+-                                 struct device *dev) { return 0; }
+-static inline void fdtv_unregister_rc(struct firedtv *fdtv) {}
+-static inline void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) {}
+-#endif
+-
+-#endif /* _FIREDTV_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-rc.c linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-rc.c
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/firedtv-rc.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/firedtv-rc.c      1970-01-01 01:00:00.000000000 +0100
+@@ -1,190 +0,0 @@
+-/*
+- * FireDTV driver (formerly known as FireSAT)
+- *
+- * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+- *
+- *    This program is free software; you can redistribute it and/or
+- *    modify it under the terms of the GNU General Public License as
+- *    published by the Free Software Foundation; either version 2 of
+- *    the License, or (at your option) any later version.
+- */
+-
+-#include <linux/bitops.h>
+-#include <linux/input.h>
+-#include <linux/kernel.h>
+-#include <linux/string.h>
+-#include <linux/types.h>
+-
+-#include "firedtv.h"
+-
+-/* fixed table with older keycodes, geared towards MythTV */
+-const static u16 oldtable[] = {
+-
+-      /* code from device: 0x4501...0x451f */
+-
+-      KEY_ESC,
+-      KEY_F9,
+-      KEY_1,
+-      KEY_2,
+-      KEY_3,
+-      KEY_4,
+-      KEY_5,
+-      KEY_6,
+-      KEY_7,
+-      KEY_8,
+-      KEY_9,
+-      KEY_I,
+-      KEY_0,
+-      KEY_ENTER,
+-      KEY_RED,
+-      KEY_UP,
+-      KEY_GREEN,
+-      KEY_F10,
+-      KEY_SPACE,
+-      KEY_F11,
+-      KEY_YELLOW,
+-      KEY_DOWN,
+-      KEY_BLUE,
+-      KEY_Z,
+-      KEY_P,
+-      KEY_PAGEDOWN,
+-      KEY_LEFT,
+-      KEY_W,
+-      KEY_RIGHT,
+-      KEY_P,
+-      KEY_M,
+-
+-      /* code from device: 0x4540...0x4542 */
+-
+-      KEY_R,
+-      KEY_V,
+-      KEY_C,
+-};
+-
+-/* user-modifiable table for a remote as sold in 2008 */
+-const static u16 keytable[] = {
+-
+-      /* code from device: 0x0300...0x031f */
+-
+-      [0x00] = KEY_POWER,
+-      [0x01] = KEY_SLEEP,
+-      [0x02] = KEY_STOP,
+-      [0x03] = KEY_OK,
+-      [0x04] = KEY_RIGHT,
+-      [0x05] = KEY_1,
+-      [0x06] = KEY_2,
+-      [0x07] = KEY_3,
+-      [0x08] = KEY_LEFT,
+-      [0x09] = KEY_4,
+-      [0x0a] = KEY_5,
+-      [0x0b] = KEY_6,
+-      [0x0c] = KEY_UP,
+-      [0x0d] = KEY_7,
+-      [0x0e] = KEY_8,
+-      [0x0f] = KEY_9,
+-      [0x10] = KEY_DOWN,
+-      [0x11] = KEY_TITLE,     /* "OSD" - fixme */
+-      [0x12] = KEY_0,
+-      [0x13] = KEY_F20,       /* "16:9" - fixme */
+-      [0x14] = KEY_SCREEN,    /* "FULL" - fixme */
+-      [0x15] = KEY_MUTE,
+-      [0x16] = KEY_SUBTITLE,
+-      [0x17] = KEY_RECORD,
+-      [0x18] = KEY_TEXT,
+-      [0x19] = KEY_AUDIO,
+-      [0x1a] = KEY_RED,
+-      [0x1b] = KEY_PREVIOUS,
+-      [0x1c] = KEY_REWIND,
+-      [0x1d] = KEY_PLAYPAUSE,
+-      [0x1e] = KEY_NEXT,
+-      [0x1f] = KEY_VOLUMEUP,
+-
+-      /* code from device: 0x0340...0x0354 */
+-
+-      [0x20] = KEY_CHANNELUP,
+-      [0x21] = KEY_F21,       /* "4:3" - fixme */
+-      [0x22] = KEY_TV,
+-      [0x23] = KEY_DVD,
+-      [0x24] = KEY_VCR,
+-      [0x25] = KEY_AUX,
+-      [0x26] = KEY_GREEN,
+-      [0x27] = KEY_YELLOW,
+-      [0x28] = KEY_BLUE,
+-      [0x29] = KEY_CHANNEL,   /* "CH.LIST" */
+-      [0x2a] = KEY_VENDOR,    /* "CI" - fixme */
+-      [0x2b] = KEY_VOLUMEDOWN,
+-      [0x2c] = KEY_CHANNELDOWN,
+-      [0x2d] = KEY_LAST,
+-      [0x2e] = KEY_INFO,
+-      [0x2f] = KEY_FORWARD,
+-      [0x30] = KEY_LIST,
+-      [0x31] = KEY_FAVORITES,
+-      [0x32] = KEY_MENU,
+-      [0x33] = KEY_EPG,
+-      [0x34] = KEY_EXIT,
+-};
+-
+-int fdtv_register_rc(struct firedtv *fdtv, struct device *dev)
+-{
+-      struct input_dev *idev;
+-      int i, err;
+-
+-      idev = input_allocate_device();
+-      if (!idev)
+-              return -ENOMEM;
+-
+-      fdtv->remote_ctrl_dev = idev;
+-      idev->name = "FireDTV remote control";
+-      idev->dev.parent = dev;
+-      idev->evbit[0] = BIT_MASK(EV_KEY);
+-      idev->keycode = kmemdup(keytable, sizeof(keytable), GFP_KERNEL);
+-      if (!idev->keycode) {
+-              err = -ENOMEM;
+-              goto fail;
+-      }
+-      idev->keycodesize = sizeof(keytable[0]);
+-      idev->keycodemax = ARRAY_SIZE(keytable);
+-
+-      for (i = 0; i < ARRAY_SIZE(keytable); i++)
+-              set_bit(keytable[i], idev->keybit);
+-
+-      err = input_register_device(idev);
+-      if (err)
+-              goto fail_free_keymap;
+-
+-      return 0;
+-
+-fail_free_keymap:
+-      kfree(idev->keycode);
+-fail:
+-      input_free_device(idev);
+-      return err;
+-}
+-
+-void fdtv_unregister_rc(struct firedtv *fdtv)
+-{
+-      kfree(fdtv->remote_ctrl_dev->keycode);
+-      input_unregister_device(fdtv->remote_ctrl_dev);
+-}
+-
+-void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
+-{
+-      u16 *keycode = fdtv->remote_ctrl_dev->keycode;
+-
+-      if (code >= 0x0300 && code <= 0x031f)
+-              code = keycode[code - 0x0300];
+-      else if (code >= 0x0340 && code <= 0x0354)
+-              code = keycode[code - 0x0320];
+-      else if (code >= 0x4501 && code <= 0x451f)
+-              code = oldtable[code - 0x4501];
+-      else if (code >= 0x4540 && code <= 0x4542)
+-              code = oldtable[code - 0x4521];
+-      else {
+-              printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
+-                     "from remote control\n", code);
+-              return;
+-      }
+-
+-      input_report_key(fdtv->remote_ctrl_dev, code, 1);
+-      input_report_key(fdtv->remote_ctrl_dev, code, 0);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/Kconfig linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/Kconfig
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/Kconfig       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/Kconfig   1970-01-01 01:00:00.000000000 +0100
+@@ -1,22 +0,0 @@
+-config DVB_FIREDTV
+-      tristate "FireDTV and FloppyDTV"
+-      depends on DVB_CORE && IEEE1394
+-      help
+-        Support for DVB receivers from Digital Everywhere
+-        which are connected via IEEE 1394 (FireWire).
+-
+-        These devices don't have an MPEG decoder built in,
+-        so you need an external software decoder to watch TV.
+-
+-        To compile this driver as a module, say M here:
+-        the module will be called firedtv.
+-
+-if DVB_FIREDTV
+-
+-config DVB_FIREDTV_IEEE1394
+-      def_bool IEEE1394
+-
+-config DVB_FIREDTV_INPUT
+-      def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
+-
+-endif # DVB_FIREDTV
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/firewire/Makefile linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/Makefile
+--- linux-2.6.29.owrt/drivers/media/dvb/firewire/Makefile      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/firewire/Makefile  1970-01-01 01:00:00.000000000 +0100
+@@ -1,8 +0,0 @@
+-obj-$(CONFIG_DVB_FIREDTV) += firedtv.o
+-
+-firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o
+-firedtv-$(CONFIG_DVB_FIREDTV_IEEE1394) += firedtv-1394.o
+-firedtv-$(CONFIG_DVB_FIREDTV_INPUT)    += firedtv-rc.o
+-
+-ccflags-y += -Idrivers/media/dvb/dvb-core
+-ccflags-$(CONFIG_DVB_FIREDTV_IEEE1394) += -Idrivers/ieee1394
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/drx397xD.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/drx397xD.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/drx397xD.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/drx397xD.c       2009-05-10 23:48:28.000000000 +0200
+@@ -646,7 +646,7 @@
+       u32 edi = 0, ebx = 0, ebp = 0, edx = 0;
+       u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0;
+-      int rc, df_tuner = 0;
++      int rc, df_tuner;
+       int a, b, c, d;
+       pr_debug("%s %d\n", __func__, s->config.d60);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/s5h1409.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/s5h1409.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/s5h1409.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/s5h1409.c        2009-05-10 23:48:28.000000000 +0200
+@@ -545,6 +545,9 @@
+       s5h1409_enable_modulation(fe, p->u.vsb.modulation);
++      /* Allow the demod to settle */
++      msleep(100);
++
+       if (fe->ops.tuner_ops.set_params) {
+               if (fe->ops.i2c_gate_ctrl)
+                       fe->ops.i2c_gate_ctrl(fe, 1);
+@@ -559,10 +562,6 @@
+               s5h1409_set_qam_interleave_mode(fe);
+       }
+-      /* Issue a reset to the demod so it knows to resync against the
+-         newly tuned frequency */
+-      s5h1409_softreset(fe);
+-
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_algo.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_algo.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_algo.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_algo.c   2009-05-10 23:48:28.000000000 +0200
+@@ -31,8 +31,6 @@
+       return n;
+ }
+-#if 0
+-/* These functions are currently unused */
+ /*
+  * stb0899_calc_srate
+  * Compute symbol rate
+@@ -65,7 +63,6 @@
+       return stb0899_calc_srate(internal->master_clk, sfr);
+ }
+-#endif
+ /*
+  * stb0899_set_srate
+@@ -156,7 +153,7 @@
+       }
+       if (range > 0)
+-              internal->sub_range = min(internal->srch_range, range);
++              internal->sub_range = MIN(internal->srch_range, range);
+       else
+               internal->sub_range = 0;
+@@ -185,7 +182,7 @@
+       timing = stb0899_read_reg(state, STB0899_RTF);
+       if (lock >= 42) {
+-              if ((lock > 48) && (abs(timing) >= 110)) {
++              if ((lock > 48) && (ABS(timing) >= 110)) {
+                       internal->status = ANALOGCARRIER;
+                       dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
+               } else {
+@@ -222,7 +219,7 @@
+               index++;
+               derot_freq += index * internal->direction * derot_step; /* next derot zig zag position  */
+-              if (abs(derot_freq) > derot_limit)
++              if (ABS(derot_freq) > derot_limit)
+                       next_loop--;
+               if (next_loop) {
+@@ -298,7 +295,7 @@
+                       last_derot_freq = derot_freq;
+                       derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
+-                      if(abs(derot_freq) > derot_limit)
++                      if(ABS(derot_freq) > derot_limit)
+                               next_loop--;
+                       if (next_loop) {
+@@ -400,7 +397,7 @@
+               if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
+                       derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position */
+-                      if (abs(derot_freq) > derot_limit)
++                      if (ABS(derot_freq) > derot_limit)
+                               next_loop--;
+                       if (next_loop) {
+@@ -467,7 +464,7 @@
+       if (internal->sub_dir > 0) {
+               old_sub_range = internal->sub_range;
+-              internal->sub_range = min((internal->srch_range / 2) -
++              internal->sub_range = MIN((internal->srch_range / 2) -
+                                         (internal->tuner_offst + internal->sub_range / 2),
+                                          internal->sub_range);
+@@ -771,7 +768,7 @@
+       int i;
+       i = 0;
+-      while ((1 << i) <= abs(number))
++      while ((1 << i) <= ABS(number))
+               i++;
+       if (number == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_drv.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_drv.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_drv.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_drv.c    2009-05-10 23:48:28.000000000 +0200
+@@ -794,7 +794,7 @@
+       reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
+       old_state = reg;
+       /* set to burst mode    */
+-      STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
++      STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02);
+       STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
+       stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
+       switch (burst) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_priv.h linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_priv.h
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/stb0899_priv.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb0899_priv.h   2009-05-10 23:48:28.000000000 +0200
+@@ -59,6 +59,10 @@
+ #define MAKEWORD32(a, b, c, d)                        (((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
+ #define MAKEWORD16(a, b)                      (((a) << 8) | (b))
++#define MIN(x, y)                             ((x) <= (y) ? (x) : (y))
++#define MAX(x, y)                             ((x) >= (y) ? (x) : (y))
++#define ABS(x)                                        ((x) >= 0 ? (x) : -(x))
++
+ #define LSB(x)                                        ((x & 0xff))
+ #define MSB(y)                                        ((y >> 8) & 0xff)
+@@ -164,10 +168,10 @@
+       u32                     freq;                   /* Demod internal Frequency             */
+       u32                     srate;                  /* Demod internal Symbol rate           */
+       enum stb0899_fec        fecrate;                /* Demod internal FEC rate              */
+-      s32                     srch_range;             /* Demod internal Search Range          */
+-      s32                     sub_range;              /* Demod current sub range (Hz)         */
+-      s32                     tuner_step;             /* Tuner step (Hz)                      */
+-      s32                     tuner_offst;            /* Relative offset to carrier (Hz)      */
++      u32                     srch_range;             /* Demod internal Search Range          */
++      u32                     sub_range;              /* Demod current sub range (Hz)         */
++      u32                     tuner_step;             /* Tuner step (Hz)                      */
++      u32                     tuner_offst;            /* Relative offset to carrier (Hz)      */
+       u32                     tuner_bw;               /* Current bandwidth of the tuner (Hz)  */
+       s32                     mclk;                   /* Masterclock Divider factor (binary)  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/stb6100.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb6100.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/stb6100.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/stb6100.c        2009-05-10 23:48:28.000000000 +0200
+@@ -427,11 +427,11 @@
+       status->refclock        = 27000000;     /* Hz   */
+       status->iqsense         = 1;
+       status->bandwidth       = 36000;        /* kHz  */
+-      state->bandwidth        = status->bandwidth * 1000;     /* Hz   */
++      state->bandwidth        = status->bandwidth * 1000;     /* MHz  */
+       state->reference        = status->refclock / 1000;      /* kHz  */
+       /* Set default bandwidth.       */
+-      return stb6100_set_bandwidth(fe, state->bandwidth);
++      return stb6100_set_bandwidth(fe, status->bandwidth);
+ }
+ static int stb6100_get_state(struct dvb_frontend *fe,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/zl10353.c linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/zl10353.c
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/zl10353.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/zl10353.c        2009-05-10 23:48:28.000000000 +0200
+@@ -590,7 +590,7 @@
+       struct zl10353_state *state = fe->demodulator_priv;
+       u8 val = 0x0a;
+-      if (state->config.disable_i2c_gate_ctrl) {
++      if (state->config.no_tuner) {
+               /* No tuner attached to the internal I2C bus */
+               /* If set enable I2C bridge, the main I2C bus stopped hardly */
+               return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/frontends/zl10353.h linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/zl10353.h
+--- linux-2.6.29.owrt/drivers/media/dvb/frontends/zl10353.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/frontends/zl10353.h        2009-05-10 23:48:28.000000000 +0200
+@@ -38,9 +38,6 @@
+       /* set if parallel ts output is required */
+       int parallel_ts;
+-
+-      /* set if i2c_gate_ctrl disable is required */
+-      u8 disable_i2c_gate_ctrl:1;
+ };
+ #if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/Kconfig linux-2.6.29-rc3.owrt/drivers/media/dvb/Kconfig
+--- linux-2.6.29.owrt/drivers/media/dvb/Kconfig        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/Kconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -51,10 +51,6 @@
+       depends on DVB_CORE && PCI && I2C
+ source "drivers/media/dvb/dm1105/Kconfig"
+-comment "Supported FireWire (IEEE 1394) Adapters"
+-      depends on DVB_CORE && IEEE1394
+-source "drivers/media/dvb/firewire/Kconfig"
+-
+ comment "Supported DVB Frontends"
+       depends on DVB_CORE
+ source "drivers/media/dvb/frontends/Kconfig"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/Makefile linux-2.6.29-rc3.owrt/drivers/media/dvb/Makefile
+--- linux-2.6.29.owrt/drivers/media/dvb/Makefile       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/Makefile   2009-05-10 23:48:28.000000000 +0200
+@@ -3,5 +3,3 @@
+ #
+ obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/
+-
+-obj-$(CONFIG_DVB_FIREDTV)     += firewire/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/ttpci/budget.c linux-2.6.29-rc3.owrt/drivers/media/dvb/ttpci/budget.c
+--- linux-2.6.29.owrt/drivers/media/dvb/ttpci/budget.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/ttpci/budget.c     2009-05-10 23:48:28.000000000 +0200
+@@ -470,7 +470,6 @@
+               budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
+               if (budget->dvb_frontend) {
+                       budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+-                      budget->dvb_frontend->tuner_priv = NULL;
+                       break;
+               }
+               break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/dvb/ttusb-dec/ttusb_dec.c linux-2.6.29-rc3.owrt/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+--- linux-2.6.29.owrt/drivers/media/dvb/ttusb-dec/ttusb_dec.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/dvb/ttusb-dec/ttusb_dec.c      2009-05-10 23:48:28.000000000 +0200
+@@ -1384,7 +1384,7 @@
+ static int ttusb_dec_init_stb(struct ttusb_dec *dec)
+ {
+       int result;
+-      unsigned int mode = 0, model = 0, version = 0;
++      unsigned int mode, model, version;
+       dprintk("%s\n", __func__);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/radio/radio-mr800.c linux-2.6.29-rc3.owrt/drivers/media/radio/radio-mr800.c
+--- linux-2.6.29.owrt/drivers/media/radio/radio-mr800.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/radio/radio-mr800.c    2009-05-10 23:48:28.000000000 +0200
+@@ -194,10 +194,10 @@
+               return retval;
+       }
+-      radio->muted = 0;
+-
+       mutex_unlock(&radio->lock);
++      radio->muted = 0;
++
+       return retval;
+ }
+@@ -230,10 +230,10 @@
+               return retval;
+       }
+-      radio->muted = 1;
+-
+       mutex_unlock(&radio->lock);
++      radio->muted = 1;
++
+       return retval;
+ }
+@@ -284,10 +284,10 @@
+               return retval;
+       }
+-      radio->stereo = 0;
+-
+       mutex_unlock(&radio->lock);
++      radio->stereo = 0;
++
+       return retval;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/radio/radio-si470x.c linux-2.6.29-rc3.owrt/drivers/media/radio/radio-si470x.c
+--- linux-2.6.29.owrt/drivers/media/radio/radio-si470x.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/radio/radio-si470x.c   2009-05-10 23:48:28.000000000 +0200
+@@ -98,16 +98,11 @@
+  *            - blacklisted KWorld radio in hid-core.c and hid-ids.h
+  * 2008-12-03 Mark Lord <mlord@pobox.com>
+  *            - add support for DealExtreme USB Radio
+- * 2009-01-31 Bob Ross <pigiron@gmx.com>
+- *            - correction of stereo detection/setting
+- *            - correction of signal strength indicator scaling
+- * 2009-01-31 Rick Bronson <rick@efn.org>
+- *            Tobias Lorenz <tobias.lorenz@gmx.net>
+- *            - add LED status output
+  *
+  * ToDo:
+  * - add firmware download/update support
+  * - RDS support: interrupt mode, instead of polling
++ * - add LED status output (check if that's not already done in firmware)
+  */
+@@ -887,30 +882,6 @@
+ /**************************************************************************
+- * General Driver Functions - LED_REPORT
+- **************************************************************************/
+-
+-/*
+- * si470x_set_led_state - sets the led state
+- */
+-static int si470x_set_led_state(struct si470x_device *radio,
+-              unsigned char led_state)
+-{
+-      unsigned char buf[LED_REPORT_SIZE];
+-      int retval;
+-
+-      buf[0] = LED_REPORT;
+-      buf[1] = LED_COMMAND;
+-      buf[2] = led_state;
+-
+-      retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
+-
+-      return (retval < 0) ? -EINVAL : 0;
+-}
+-
+-
+-
+-/**************************************************************************
+  * RDS Driver Functions
+  **************************************************************************/
+@@ -1414,22 +1385,20 @@
+       };
+       /* stereo indicator == stereo (instead of mono) */
+-      if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
+-              tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+-      else
++      if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
+               tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
++      else
++              tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+       /* mono/stereo selector */
+-      if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
+-              tuner->audmode = V4L2_TUNER_MODE_STEREO;
+-      else
++      if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
+               tuner->audmode = V4L2_TUNER_MODE_MONO;
++      else
++              tuner->audmode = V4L2_TUNER_MODE_STEREO;
+       /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
+-      /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+-      tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+-      /* the ideal factor is 0xffff/75 = 873,8 */
+-      tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
++      tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
++                              * 0x0101;
+       /* automatic frequency control: -1: freq to low, 1 freq to high */
+       /* AFCRL does only indicate that freq. differs, not if too low/high */
+@@ -1663,9 +1632,6 @@
+       /* set initial frequency */
+       si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
+-      /* set led to connect state */
+-      si470x_set_led_state(radio, BLINK_GREEN_LED);
+-
+       /* rds buffer allocation */
+       radio->buf_size = rds_buf * 3;
+       radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
+@@ -1749,9 +1715,6 @@
+       cancel_delayed_work_sync(&radio->work);
+       usb_set_intfdata(intf, NULL);
+       if (radio->users == 0) {
+-              /* set led to disconnect state */
+-              si470x_set_led_state(radio, BLINK_ORANGE_LED);
+-
+               video_unregister_device(radio->videodev);
+               kfree(radio->buffer);
+               kfree(radio);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cs5345.c linux-2.6.29-rc3.owrt/drivers/media/video/cs5345.c
+--- linux-2.6.29.owrt/drivers/media/video/cs5345.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cs5345.c 2009-05-10 23:48:28.000000000 +0200
+@@ -18,6 +18,7 @@
+  */
++#include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/i2c.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cx23885/cx23885-417.c linux-2.6.29-rc3.owrt/drivers/media/video/cx23885/cx23885-417.c
+--- linux-2.6.29.owrt/drivers/media/video/cx23885/cx23885-417.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cx23885/cx23885-417.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1586,8 +1586,7 @@
+       lock_kernel();
+       list_for_each(list, &cx23885_devlist) {
+               h = list_entry(list, struct cx23885_dev, devlist);
+-              if (h->v4l_device &&
+-                  h->v4l_device->minor == minor) {
++              if (h->v4l_device->minor == minor) {
+                       dev = h;
+                       break;
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cx23885/cx23885-video.c linux-2.6.29-rc3.owrt/drivers/media/video/cx23885/cx23885-video.c
+--- linux-2.6.29.owrt/drivers/media/video/cx23885/cx23885-video.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cx23885/cx23885-video.c  2009-05-10 23:48:28.000000000 +0200
+@@ -730,13 +730,12 @@
+       lock_kernel();
+       list_for_each(list, &cx23885_devlist) {
+               h = list_entry(list, struct cx23885_dev, devlist);
+-              if (h->video_dev &&
+-                  h->video_dev->minor == minor) {
++              if (h->video_dev->minor == minor) {
+                       dev  = h;
+                       type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+               }
+               if (h->vbi_dev &&
+-                  h->vbi_dev->minor == minor) {
++                 h->vbi_dev->minor == minor) {
+                       dev  = h;
+                       type = V4L2_BUF_TYPE_VBI_CAPTURE;
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cx25840/cx25840-core.c linux-2.6.29-rc3.owrt/drivers/media/video/cx25840/cx25840-core.c
+--- linux-2.6.29.owrt/drivers/media/video/cx25840/cx25840-core.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cx25840/cx25840-core.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1382,14 +1382,6 @@
+ static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg)
+ {
+-      /* ignore this command */
+-      if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG)
+-              return 0;
+-
+-      /* Old-style drivers rely on initialization on first use, so
+-         call the init whenever a command is issued to this driver.
+-         New-style drivers using v4l2_subdev should call init explicitly. */
+-      cx25840_init(i2c_get_clientdata(client), 0);
+       return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cx88/cx88-dvb.c linux-2.6.29-rc3.owrt/drivers/media/video/cx88/cx88-dvb.c
+--- linux-2.6.29.owrt/drivers/media/video/cx88/cx88-dvb.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cx88/cx88-dvb.c  2009-05-10 23:48:28.000000000 +0200
+@@ -614,41 +614,34 @@
+       .set_ts_params = cx24116_set_ts_param,
+ };
+-static int cx8802_alloc_frontends(struct cx8802_dev *dev)
++static int dvb_register(struct cx8802_dev *dev)
+ {
+       struct cx88_core *core = dev->core;
+-      struct videobuf_dvb_frontend *fe = NULL;
++      struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
++      int mfe_shared = 0; /* bus not shared by default */
+       int i;
+-      mutex_init(&dev->frontends.lock);
+-      INIT_LIST_HEAD(&dev->frontends.felist);
++      if (0 != core->i2c_rc) {
++              printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
++              goto frontend_detach;
++      }
+       if (!core->board.num_frontends)
+-              return -ENODEV;
++              return -EINVAL;
++
++      mutex_init(&dev->frontends.lock);
++      INIT_LIST_HEAD(&dev->frontends.felist);
+       printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+                        core->board.num_frontends);
+       for (i = 1; i <= core->board.num_frontends; i++) {
+-              fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
+-              if (!fe) {
++              fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i);
++              if (!fe0) {
+                       printk(KERN_ERR "%s() failed to alloc\n", __func__);
+                       videobuf_dvb_dealloc_frontends(&dev->frontends);
+-                      return -ENOMEM;
++                      goto frontend_detach;
+               }
+       }
+-      return 0;
+-}
+-
+-static int dvb_register(struct cx8802_dev *dev)
+-{
+-      struct cx88_core *core = dev->core;
+-      struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+-      int mfe_shared = 0; /* bus not shared by default */
+-
+-      if (0 != core->i2c_rc) {
+-              printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
+-              goto frontend_detach;
+-      }
+       /* Get the first frontend */
+       fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+@@ -1250,8 +1243,6 @@
+       struct cx88_core *core = drv->core;
+       struct cx8802_dev *dev = drv->core->dvbdev;
+       int err;
+-      struct videobuf_dvb_frontend *fe;
+-      int i;
+       dprintk( 1, "%s\n", __func__);
+       dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+@@ -1267,34 +1258,39 @@
+       /* If vp3054 isn't enabled, a stub will just return 0 */
+       err = vp3054_i2c_probe(dev);
+       if (0 != err)
+-              goto fail_core;
++              goto fail_probe;
+       /* dvb stuff */
+       printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
+       dev->ts_gen_cntrl = 0x0c;
+-      err = cx8802_alloc_frontends(dev);
+-      if (err)
+-              goto fail_core;
+-
+       err = -ENODEV;
+-      for (i = 1; i <= core->board.num_frontends; i++) {
+-              fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
+-              if (fe == NULL) {
+-                      printk(KERN_ERR "%s() failed to get frontend(%d)\n",
++      if (core->board.num_frontends) {
++              struct videobuf_dvb_frontend *fe;
++              int i;
++
++              for (i = 1; i <= core->board.num_frontends; i++) {
++                      fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
++                      if (fe == NULL) {
++                              printk(KERN_ERR "%s() failed to get frontend(%d)\n",
+                                       __func__, i);
+-                      goto fail_probe;
+-              }
+-              videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
++                              goto fail_probe;
++                      }
++                      videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
+                                   &dev->pci->dev, &dev->slock,
+                                   V4L2_BUF_TYPE_VIDEO_CAPTURE,
+                                   V4L2_FIELD_TOP,
+                                   sizeof(struct cx88_buffer),
+                                   dev);
+-              /* init struct videobuf_dvb */
+-              fe->dvb.name = dev->core->name;
++                      /* init struct videobuf_dvb */
++                      fe->dvb.name = dev->core->name;
++              }
++      } else {
++              /* no frontends allocated */
++              printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n",
++                      core->name);
++              goto fail_core;
+       }
+-
+       err = dvb_register(dev);
+       if (err)
+               /* frontends/adapter de-allocated in dvb_register */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/cx88/cx88.h linux-2.6.29-rc3.owrt/drivers/media/video/cx88/cx88.h
+--- linux-2.6.29.owrt/drivers/media/video/cx88/cx88.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/cx88/cx88.h      2009-05-10 23:48:28.000000000 +0200
+@@ -336,8 +336,8 @@
+       /* config info -- dvb */
+ #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
+       int                        (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+-#endif
+       void                       (*gate_ctrl)(struct cx88_core  *core, int open);
++#endif
+       /* state info */
+       struct task_struct         *kthread;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-audio.c linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-audio.c
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-audio.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-audio.c    2009-05-10 23:48:28.000000000 +0200
+@@ -62,15 +62,9 @@
+       dprintk("Stopping isoc\n");
+       for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
+-              if (!irqs_disabled())
+-                      usb_kill_urb(dev->adev.urb[i]);
+-              else
+-                      usb_unlink_urb(dev->adev.urb[i]);
++              usb_unlink_urb(dev->adev.urb[i]);
+               usb_free_urb(dev->adev.urb[i]);
+               dev->adev.urb[i] = NULL;
+-
+-              kfree(dev->adev.transfer_buffer[i]);
+-              dev->adev.transfer_buffer[i] = NULL;
+       }
+       return 0;
+@@ -395,15 +389,11 @@
+ static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
+                                                   *substream)
+ {
+-       unsigned long flags;
+-
+       struct em28xx *dev;
+-      snd_pcm_uframes_t hwptr_done;
++      snd_pcm_uframes_t hwptr_done;
+       dev = snd_pcm_substream_chip(substream);
+-       spin_lock_irqsave(&dev->adev.slock, flags);
+       hwptr_done = dev->adev.hwptr_done_capture;
+-       spin_unlock_irqrestore(&dev->adev.slock, flags);
+       return hwptr_done;
+ }
+@@ -463,8 +453,6 @@
+       pcm->info_flags = 0;
+       pcm->private_data = dev;
+       strcpy(pcm->name, "Empia 28xx Capture");
+-
+-      snd_card_set_dev(card, &dev->udev->dev);
+       strcpy(card->driver, "Empia Em28xx Audio");
+       strcpy(card->shortname, "Em28xx Audio");
+       strcpy(card->longname, "Empia Em28xx Audio");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-cards.c linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-cards.c
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-cards.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-cards.c    2009-05-10 23:48:28.000000000 +0200
+@@ -102,18 +102,6 @@
+ /* Board  - EM2870 Kworld 355u
+    Analog - No input analog */
+-static struct em28xx_reg_seq kworld_330u_analog[] = {
+-      {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
+-      {EM2880_R04_GPO,        0x00,   0xff,           10},
+-      { -1,                   -1,     -1,             -1},
+-};
+-
+-static struct em28xx_reg_seq kworld_330u_digital[] = {
+-      {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
+-      {EM2880_R04_GPO,        0x08,   0xff,           10},
+-      { -1,                   -1,     -1,             -1},
+-};
+-
+ /* Callback for the most boards */
+ static struct em28xx_reg_seq default_tuner_gpio[] = {
+       {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
+@@ -1189,33 +1177,29 @@
+                       .gpio     = hauppauge_wintv_hvr_900_analog,
+               } },
+       },
+-      [EM2883_BOARD_KWORLD_HYBRID_330U] = {
++      [EM2883_BOARD_KWORLD_HYBRID_A316] = {
+               .name         = "Kworld PlusTV HD Hybrid 330",
+               .tuner_type   = TUNER_XC2028,
+               .tuner_gpio   = default_tuner_gpio,
+               .decoder      = EM28XX_TVP5150,
+               .mts_firmware = 1,
+               .has_dvb      = 1,
+-              .dvb_gpio     = kworld_330u_digital,
+-              .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
+-              .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID,
++              .dvb_gpio     = default_digital,
+               .input        = { {
+                       .type     = EM28XX_VMUX_TELEVISION,
+                       .vmux     = TVP5150_COMPOSITE0,
+                       .amux     = EM28XX_AMUX_VIDEO,
+-                      .gpio     = kworld_330u_analog,
+-                      .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
++                      .gpio     = default_analog,
+               }, {
+                       .type     = EM28XX_VMUX_COMPOSITE1,
+                       .vmux     = TVP5150_COMPOSITE1,
+                       .amux     = EM28XX_AMUX_LINE_IN,
+-                      .gpio     = kworld_330u_analog,
+-                      .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
++                      .gpio     = hauppauge_wintv_hvr_900_analog,
+               }, {
+                       .type     = EM28XX_VMUX_SVIDEO,
+                       .vmux     = TVP5150_SVIDEO,
+                       .amux     = EM28XX_AMUX_LINE_IN,
+-                      .gpio     = kworld_330u_analog,
++                      .gpio     = hauppauge_wintv_hvr_900_analog,
+               } },
+       },
+       [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
+@@ -1265,7 +1249,7 @@
+       { USB_DEVICE(0xeb1a, 0xe310),
+                       .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
+       { USB_DEVICE(0xeb1a, 0xa316),
+-                      .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
++                      .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
+       { USB_DEVICE(0xeb1a, 0xe320),
+                       .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
+       { USB_DEVICE(0xeb1a, 0xe323),
+@@ -1542,10 +1526,6 @@
+               /* FIXME: Better to specify the needed IF */
+               ctl->demod = XC3028_FE_DEFAULT;
+               break;
+-      case EM2883_BOARD_KWORLD_HYBRID_330U:
+-              ctl->demod = XC3028_FE_CHINA;
+-              ctl->fname = XC2028_DEFAULT_FIRMWARE;
+-              break;
+       default:
+               ctl->demod = XC3028_FE_OREN538;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-core.c linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-core.c
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-core.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-core.c     2009-05-10 23:48:28.000000000 +0200
+@@ -438,10 +438,6 @@
+       if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+               int vol;
+-              em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200);
+-              em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031);
+-              em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80);
+-
+               /* LSB: left channel - both channels with the same level */
+               vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
+@@ -458,15 +454,6 @@
+                               em28xx_warn("couldn't setup AC97 register %d\n",
+                                    outputs[i].reg);
+               }
+-
+-              if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
+-                      int sel = ac97_return_record_select(dev->ctl_aoutput);
+-
+-                      /* Use the same input for both left and right channels */
+-                      sel |= (sel << 8);
+-
+-                      em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
+-              }
+       }
+       return ret;
+@@ -860,11 +847,8 @@
+       for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+               urb = dev->isoc_ctl.urb[i];
+               if (urb) {
+-                      if (!irqs_disabled())
+-                              usb_kill_urb(urb);
+-                      else
+-                              usb_unlink_urb(urb);
+-
++                      usb_kill_urb(urb);
++                      usb_unlink_urb(urb);
+                       if (dev->isoc_ctl.transfer_buffer[i]) {
+                               usb_buffer_free(dev->udev,
+                                       urb->transfer_buffer_length,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-dvb.c linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-dvb.c
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-dvb.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-dvb.c      2009-05-10 23:48:28.000000000 +0200
+@@ -28,7 +28,6 @@
+ #include "lgdt330x.h"
+ #include "zl10353.h"
+-#include "s5h1409.h"
+ #ifdef EM28XX_DRX397XD_SUPPORT
+ #include "drx397xD.h"
+ #endif
+@@ -233,15 +232,6 @@
+       .if2 = 45600,
+ };
+-static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
+-      .demod_address = 0x32 >> 1,
+-      .output_mode   = S5H1409_PARALLEL_OUTPUT,
+-      .gpio          = S5H1409_GPIO_OFF,
+-      .inversion     = S5H1409_INVERSION_OFF,
+-      .status_mode   = S5H1409_DEMODLOCKING,
+-      .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+-};
+-
+ #ifdef EM28XX_DRX397XD_SUPPORT
+ /* [TODO] djh - not sure yet what the device config needs to contain */
+ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
+@@ -422,6 +412,7 @@
+       case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
+       case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+       case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
++      case EM2883_BOARD_KWORLD_HYBRID_A316:
+       case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+               dvb->frontend = dvb_attach(lgdt330x_attach,
+                                          &em2880_lgdt3303_dev,
+@@ -442,15 +433,6 @@
+                       goto out_free;
+               }
+               break;
+-      case EM2883_BOARD_KWORLD_HYBRID_330U:
+-              dvb->frontend = dvb_attach(s5h1409_attach,
+-                                         &em28xx_s5h1409_with_xc3028,
+-                                         &dev->i2c_adap);
+-              if (attach_xc3028(0x61, dev) < 0) {
+-                      result = -EINVAL;
+-                      goto out_free;
+-              }
+-              break;
+       case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ #ifdef EM28XX_DRX397XD_SUPPORT
+               /* We don't have the config structure properly populated, so
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx.h linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx.h
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx.h  2009-05-10 23:48:28.000000000 +0200
+@@ -94,7 +94,7 @@
+ #define EM2882_BOARD_KWORLD_VS_DVBT             54
+ #define EM2882_BOARD_TERRATEC_HYBRID_XS                 55
+ #define EM2882_BOARD_PINNACLE_HYBRID_PRO        56
+-#define EM2883_BOARD_KWORLD_HYBRID_330U                  57
++#define EM2883_BOARD_KWORLD_HYBRID_A316                 57
+ #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU    58
+ #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850    60
+ #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2   61
+@@ -300,32 +300,13 @@
+ };
+ enum em28xx_aout {
+-      /* AC97 outputs */
+       EM28XX_AOUT_MASTER = 1 << 0,
+       EM28XX_AOUT_LINE   = 1 << 1,
+       EM28XX_AOUT_MONO   = 1 << 2,
+       EM28XX_AOUT_LFE    = 1 << 3,
+       EM28XX_AOUT_SURR   = 1 << 4,
+-
+-      /* PCM IN Mixer - used by AC97_RECORD_SELECT register */
+-      EM28XX_AOUT_PCM_IN = 1 << 7,
+-
+-      /* Bits 10-8 are used to indicate the PCM IN record select */
+-      EM28XX_AOUT_PCM_MIC_PCM = 0 << 8,
+-      EM28XX_AOUT_PCM_CD      = 1 << 8,
+-      EM28XX_AOUT_PCM_VIDEO   = 2 << 8,
+-      EM28XX_AOUT_PCM_AUX     = 3 << 8,
+-      EM28XX_AOUT_PCM_LINE    = 4 << 8,
+-      EM28XX_AOUT_PCM_STEREO  = 5 << 8,
+-      EM28XX_AOUT_PCM_MONO    = 6 << 8,
+-      EM28XX_AOUT_PCM_PHONE   = 7 << 8,
+ };
+-static inline int ac97_return_record_select(int a_out)
+-{
+-      return (a_out & 0x700) >> 8;
+-}
+-
+ struct em28xx_reg_seq {
+       int reg;
+       unsigned char val, mask;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-video.c linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-video.c
+--- linux-2.6.29.owrt/drivers/media/video/em28xx/em28xx-video.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/em28xx/em28xx-video.c    2009-05-10 23:48:28.000000000 +0200
+@@ -886,10 +886,10 @@
+       if (0 == INPUT(i)->type)
+               return -EINVAL;
+-      dev->ctl_input = i;
+-
+       mutex_lock(&dev->lock);
+-      video_mux(dev, dev->ctl_input);
++
++      video_mux(dev, i);
++
+       mutex_unlock(&dev->lock);
+       return 0;
+ }
+@@ -939,12 +939,6 @@
+       struct em28xx_fh   *fh  = priv;
+       struct em28xx      *dev = fh->dev;
+-
+-      if (a->index >= MAX_EM28XX_INPUT)
+-              return -EINVAL;
+-      if (0 == INPUT(a->index)->type)
+-              return -EINVAL;
+-
+       mutex_lock(&dev->lock);
+       dev->ctl_ainput = INPUT(a->index)->amux;
+@@ -1956,7 +1950,6 @@
+ int em28xx_register_analog_devices(struct em28xx *dev)
+ {
+-      u8 val;
+       int ret;
+       printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n",
+@@ -1964,34 +1957,34 @@
+               (EM28XX_VERSION_CODE >> 16) & 0xff,
+               (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
+-      /* set default norm */
+-      dev->norm = em28xx_video_template.current_norm;
+-      dev->width = norm_maxw(dev);
+-      dev->height = norm_maxh(dev);
+-      dev->interlaced = EM28XX_INTERLACED_DEFAULT;
+-      dev->hscale = 0;
+-      dev->vscale = 0;
+-      dev->ctl_input = 0;
+-
+       /* Analog specific initialization */
+       dev->format = &format[0];
+-      video_mux(dev, dev->ctl_input);
+-
+-      /* Audio defaults */
+-      dev->mute = 1;
+-      dev->volume = 0x1f;
++      video_mux(dev, 0);
+       /* enable vbi capturing */
+ /*    em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
+-       val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
+-       em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val));
++/*    em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */
+       em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
++      dev->mute = 1;          /* maybe not the right place... */
++      dev->volume = 0x1f;
++
+       em28xx_set_outfmt(dev);
+       em28xx_colorlevels_set_default(dev);
+       em28xx_compression_disable(dev);
++      /* set default norm */
++      dev->norm = em28xx_video_template.current_norm;
++      dev->width = norm_maxw(dev);
++      dev->height = norm_maxh(dev);
++      dev->interlaced = EM28XX_INTERLACED_DEFAULT;
++      dev->hscale = 0;
++      dev->vscale = 0;
++
++      /* FIXME: This is a very bad hack! Not all devices have TV on input 2 */
++      dev->ctl_input = 2;
++
+       /* allocate and fill video video_device struct */
+       dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+       if (!dev->vdev) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/gspca/gspca.c linux-2.6.29-rc3.owrt/drivers/media/video/gspca/gspca.c
+--- linux-2.6.29.owrt/drivers/media/video/gspca/gspca.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/gspca/gspca.c    2009-05-10 23:48:28.000000000 +0200
+@@ -422,10 +422,8 @@
+               if (urb == NULL)
+                       break;
+-              BUG_ON(!gspca_dev->dev);
+               gspca_dev->urb[i] = NULL;
+-              if (!gspca_dev->present)
+-                      usb_kill_urb(urb);
++              usb_kill_urb(urb);
+               if (urb->transfer_buffer != NULL)
+                       usb_buffer_free(gspca_dev->dev,
+                                       urb->transfer_buffer_length,
+@@ -1951,12 +1949,9 @@
+ {
+       struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+-      mutex_lock(&gspca_dev->usb_lock);
+       gspca_dev->present = 0;
+-      mutex_unlock(&gspca_dev->usb_lock);
++      gspca_dev->streaming = 0;
+-      destroy_urbs(gspca_dev);
+-      gspca_dev->dev = NULL;
+       usb_set_intfdata(intf, NULL);
+       /* release the device */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/gspca/m5602/m5602_s5k4aa.c linux-2.6.29-rc3.owrt/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+--- linux-2.6.29.owrt/drivers/media/video/gspca/m5602/m5602_s5k4aa.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/gspca/m5602/m5602_s5k4aa.c       2009-05-10 23:48:28.000000000 +0200
+@@ -102,11 +102,7 @@
+       }
+       /* Test some registers, but we don't know their exact meaning yet */
+-      if (m5602_read_sensor(sd, 0x00, prod_id, 2))
+-              return -ENODEV;
+-      if (m5602_read_sensor(sd, 0x02, prod_id+2, 2))
+-              return -ENODEV;
+-      if (m5602_read_sensor(sd, 0x04, prod_id+4, 2))
++      if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id)))
+               return -ENODEV;
+       if (memcmp(prod_id, expected_prod_id, sizeof(prod_id)))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/ivtv/ivtv-driver.c linux-2.6.29-rc3.owrt/drivers/media/video/ivtv/ivtv-driver.c
+--- linux-2.6.29.owrt/drivers/media/video/ivtv/ivtv-driver.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/ivtv/ivtv-driver.c       2009-05-10 23:48:28.000000000 +0200
+@@ -949,10 +949,8 @@
+       itv->instance = atomic_inc_return(&ivtv_instance) - 1;
+       retval = v4l2_device_register(&dev->dev, &itv->device);
+-      if (retval) {
+-              kfree(itv);
++      if (retval)
+               return retval;
+-      }
+       /* "ivtv + PCI ID" is a bit of a mouthful, so use
+          "ivtv + instance" instead. */
+       snprintf(itv->device.name, sizeof(itv->device.name),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/ivtv/ivtv-ioctl.c linux-2.6.29-rc3.owrt/drivers/media/video/ivtv/ivtv-ioctl.c
+--- linux-2.6.29.owrt/drivers/media/video/ivtv/ivtv-ioctl.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/ivtv/ivtv-ioctl.c        2009-05-10 23:48:28.000000000 +0200
+@@ -393,7 +393,7 @@
+               return 0;
+       }
+-      v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
++      v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+       vbifmt->service_set = ivtv_get_service_set(vbifmt);
+       return 0;
+ }
+@@ -1748,18 +1748,6 @@
+               break;
+       }
+-      case IVTV_IOC_DMA_FRAME:
+-      case VIDEO_GET_PTS:
+-      case VIDEO_GET_FRAME_COUNT:
+-      case VIDEO_GET_EVENT:
+-      case VIDEO_PLAY:
+-      case VIDEO_STOP:
+-      case VIDEO_FREEZE:
+-      case VIDEO_CONTINUE:
+-      case VIDEO_COMMAND:
+-      case VIDEO_TRY_COMMAND:
+-              return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+-
+       default:
+               return -EINVAL;
+       }
+@@ -1802,6 +1790,18 @@
+               ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
+               return 0;
++      case IVTV_IOC_DMA_FRAME:
++      case VIDEO_GET_PTS:
++      case VIDEO_GET_FRAME_COUNT:
++      case VIDEO_GET_EVENT:
++      case VIDEO_PLAY:
++      case VIDEO_STOP:
++      case VIDEO_FREEZE:
++      case VIDEO_CONTINUE:
++      case VIDEO_COMMAND:
++      case VIDEO_TRY_COMMAND:
++              return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
++
+       default:
+               break;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/pwc/pwc-if.c linux-2.6.29-rc3.owrt/drivers/media/video/pwc/pwc-if.c
+--- linux-2.6.29.owrt/drivers/media/video/pwc/pwc-if.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/pwc/pwc-if.c     2009-05-10 23:48:28.000000000 +0200
+@@ -62,6 +62,7 @@
+ #include <linux/poll.h>
+ #include <linux/slab.h>
+ #include <linux/vmalloc.h>
++#include <linux/version.h>
+ #include <asm/io.h>
+ #include "pwc.h"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/pxa_camera.c linux-2.6.29-rc3.owrt/drivers/media/video/pxa_camera.c
+--- linux-2.6.29.owrt/drivers/media/video/pxa_camera.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/pxa_camera.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1155,24 +1155,24 @@
+ {
+       struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+       struct pxa_camera_dev *pcdev = ici->priv;
+-      const struct soc_camera_data_format *cam_fmt = NULL;
+-      const struct soc_camera_format_xlate *xlate = NULL;
++      const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
++      const struct soc_camera_format_xlate *xlate;
+       struct soc_camera_sense sense = {
+               .master_clock = pcdev->mclk,
+               .pixel_clock_max = pcdev->ciclk / 4,
+       };
+-      int ret;
++      int ret, buswidth;
+-      if (pixfmt) {
+-              xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+-              if (!xlate) {
+-                      dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+-                      return -EINVAL;
+-              }
+-
+-              cam_fmt = xlate->cam_fmt;
++      xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
++      if (!xlate) {
++              dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
++              return -EINVAL;
+       }
++      buswidth = xlate->buswidth;
++      host_fmt = xlate->host_fmt;
++      cam_fmt = xlate->cam_fmt;
++
+       /* If PCLK is used to latch data from the sensor, check sense */
+       if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
+               icd->sense = &sense;
+@@ -1201,8 +1201,8 @@
+       }
+       if (pixfmt && !ret) {
+-              icd->buswidth = xlate->buswidth;
+-              icd->current_fmt = xlate->host_fmt;
++              icd->buswidth = buswidth;
++              icd->current_fmt = host_fmt;
+       }
+       return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/saa7127.c linux-2.6.29-rc3.owrt/drivers/media/video/saa7127.c
+--- linux-2.6.29.owrt/drivers/media/video/saa7127.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/saa7127.c        2009-05-10 23:48:28.000000000 +0200
+@@ -149,7 +149,7 @@
+       { SAA7127_REG_COPYGEN_0,                        0x77 },
+       { SAA7127_REG_COPYGEN_1,                        0x41 },
+       { SAA7127_REG_COPYGEN_2,                        0x00 }, /* Macrovision enable/disable */
+-      { SAA7127_REG_OUTPUT_PORT_CONTROL,              0xbf },
++      { SAA7127_REG_OUTPUT_PORT_CONTROL,              0x9e },
+       { SAA7127_REG_GAIN_LUMINANCE_RGB,               0x00 },
+       { SAA7127_REG_GAIN_COLORDIFF_RGB,               0x00 },
+       { SAA7127_REG_INPUT_PORT_CONTROL_1,             0x80 }, /* for color bars */
+@@ -488,18 +488,12 @@
+               break;
+       case SAA7127_OUTPUT_TYPE_COMPOSITE:
+-              if (state->ident == V4L2_IDENT_SAA7129)
+-                      state->reg_2d = 0x20;   /* CVBS only */
+-              else
+-                      state->reg_2d = 0x08;   /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
++              state->reg_2d = 0x08;   /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+               state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
+               break;
+       case SAA7127_OUTPUT_TYPE_SVIDEO:
+-              if (state->ident == V4L2_IDENT_SAA7129)
+-                      state->reg_2d = 0x18;   /* Y + C */
+-              else
+-                      state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
++              state->reg_2d = 0xff;   /* 11111111  croma -> R, luma -> CVBS + G + B */
+               state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
+               break;
+@@ -514,10 +508,7 @@
+               break;
+       case SAA7127_OUTPUT_TYPE_BOTH:
+-              if (state->ident == V4L2_IDENT_SAA7129)
+-                      state->reg_2d = 0x38;
+-              else
+-                      state->reg_2d = 0xbf;
++              state->reg_2d = 0xbf;
+               state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
+               break;
+@@ -740,6 +731,24 @@
+               return -ENODEV;
+       }
++      /* Configure Encoder */
++
++      v4l2_dbg(1, debug, sd, "Configuring encoder\n");
++      saa7127_write_inittab(sd, saa7127_init_config_common);
++      saa7127_set_std(sd, V4L2_STD_NTSC);
++      saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
++      saa7127_set_vps(sd, &vbi);
++      saa7127_set_wss(sd, &vbi);
++      saa7127_set_cc(sd, &vbi);
++      saa7127_set_xds(sd, &vbi);
++      if (test_image == 1)
++              /* The Encoder has an internal Colorbar generator */
++              /* This can be used for debugging */
++              saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
++      else
++              saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
++      saa7127_set_video_enable(sd, 1);
++
+       if (id->driver_data) {  /* Chip type is already known */
+               state->ident = id->driver_data;
+       } else {                /* Needs detection */
+@@ -761,23 +770,6 @@
+       v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
+                       client->addr << 1, client->adapter->name);
+-
+-      v4l2_dbg(1, debug, sd, "Configuring encoder\n");
+-      saa7127_write_inittab(sd, saa7127_init_config_common);
+-      saa7127_set_std(sd, V4L2_STD_NTSC);
+-      saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
+-      saa7127_set_vps(sd, &vbi);
+-      saa7127_set_wss(sd, &vbi);
+-      saa7127_set_cc(sd, &vbi);
+-      saa7127_set_xds(sd, &vbi);
+-      if (test_image == 1)
+-              /* The Encoder has an internal Colorbar generator */
+-              /* This can be used for debugging */
+-              saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
+-      else
+-              saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
+-      saa7127_set_video_enable(sd, 1);
+-
+       if (state->ident == V4L2_IDENT_SAA7129)
+               saa7127_write_inittab(sd, saa7129_init_config_extra);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-alsa.c linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-alsa.c
+--- linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-alsa.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-alsa.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1089,11 +1089,7 @@
+       list_for_each(list,&saa7134_devlist) {
+               dev = list_entry(list, struct saa7134_dev, devlist);
+-              if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130)
+-                      printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n",
+-                              dev->name, saa7134_boards[dev->board].name);
+-              else
+-                      alsa_device_init(dev);
++              alsa_device_init(dev);
+       }
+       if (dev == NULL)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-core.c linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-core.c
+--- linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-core.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-core.c   2009-05-10 23:48:28.000000000 +0200
+@@ -660,10 +660,6 @@
+       saa_writel(SAA7134_IRQ1, 0);
+       saa_writel(SAA7134_IRQ2, 0);
+-
+-      /* Clear any stale IRQ reports */
+-      saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
+-
+       mutex_init(&dev->lock);
+       spin_lock_init(&dev->slock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-dvb.c linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-dvb.c
+--- linux-2.6.29.owrt/drivers/media/video/saa7134/saa7134-dvb.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/saa7134/saa7134-dvb.c    2009-05-10 23:48:28.000000000 +0200
+@@ -860,7 +860,6 @@
+       .demod_address = 0x1e>>1,
+       .no_tuner      = 1,
+       .parallel_ts   = 1,
+-      .disable_i2c_gate_ctrl = 1,
+ };
+ /* ==================================================================
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/saa717x.c linux-2.6.29-rc3.owrt/drivers/media/video/saa717x.c
+--- linux-2.6.29.owrt/drivers/media/video/saa717x.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/saa717x.c        2009-05-10 23:48:28.000000000 +0200
+@@ -30,6 +30,7 @@
+  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  */
++#include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/sh_mobile_ceu_camera.c linux-2.6.29-rc3.owrt/drivers/media/video/sh_mobile_ceu_camera.c
+--- linux-2.6.29.owrt/drivers/media/video/sh_mobile_ceu_camera.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/sh_mobile_ceu_camera.c   2009-05-10 23:48:28.000000000 +0200
+@@ -603,18 +603,21 @@
+       const struct soc_camera_format_xlate *xlate;
+       int ret;
+-      if (!pixfmt)
+-              return icd->ops->set_fmt(icd, pixfmt, rect);
+-
+       xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+       if (!xlate) {
+               dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+               return -EINVAL;
+       }
+-      ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
++      switch (pixfmt) {
++      case 0:                         /* Only geometry change */
++              ret = icd->ops->set_fmt(icd, pixfmt, rect);
++              break;
++      default:
++              ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
++      }
+-      if (!ret) {
++      if (pixfmt && !ret) {
+               icd->buswidth = xlate->buswidth;
+               icd->current_fmt = xlate->host_fmt;
+               pcdev->camera_fmt = xlate->cam_fmt;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/tda9875.c linux-2.6.29-rc3.owrt/drivers/media/video/tda9875.c
+--- linux-2.6.29.owrt/drivers/media/video/tda9875.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/tda9875.c        2009-05-10 23:48:28.000000000 +0200
+@@ -242,7 +242,7 @@
+ static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+ {
+       struct tda9875 *t = to_state(sd);
+-      int chvol = 0, volume = 0, balance = 0, left, right;
++      int chvol=0, volume, balance, left, right;
+       switch (ctrl->id) {
+       case V4L2_CID_AUDIO_VOLUME:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/tvaudio.c linux-2.6.29-rc3.owrt/drivers/media/video/tvaudio.c
+--- linux-2.6.29.owrt/drivers/media/video/tvaudio.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/tvaudio.c        2009-05-10 23:48:28.000000000 +0200
+@@ -54,7 +54,7 @@
+ /* ---------------------------------------------------------------------- */
+ /* our structs                                                            */
+-#define MAXREGS 256
++#define MAXREGS 64
+ struct CHIPSTATE;
+ typedef int  (*getvalue)(int);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/tveeprom.c linux-2.6.29-rc3.owrt/drivers/media/video/tveeprom.c
+--- linux-2.6.29.owrt/drivers/media/video/tveeprom.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/tveeprom.c       2009-05-10 23:48:28.000000000 +0200
+@@ -427,9 +427,6 @@
+       const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" };
+       memset(tvee, 0, sizeof(*tvee));
+-      tvee->tuner_type = TUNER_ABSENT;
+-      tvee->tuner2_type = TUNER_ABSENT;
+-
+       done = len = beenhere = 0;
+       /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/tvp514x.c linux-2.6.29-rc3.owrt/drivers/media/video/tvp514x.c
+--- linux-2.6.29.owrt/drivers/media/video/tvp514x.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/tvp514x.c        2009-05-10 23:48:28.000000000 +0200
+@@ -1401,7 +1401,7 @@
+       decoder->pdata = client->dev.platform_data;
+       if (!decoder->pdata) {
+-              v4l_err(client, "No platform data!!\n");
++              v4l_err(client, "No platform data\n!!");
+               return -ENODEV;
+       }
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/upd64031a.c linux-2.6.29-rc3.owrt/drivers/media/video/upd64031a.c
+--- linux-2.6.29.owrt/drivers/media/video/upd64031a.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/upd64031a.c      2009-05-10 23:48:28.000000000 +0200
+@@ -21,6 +21,7 @@
+  */
++#include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/i2c.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/upd64083.c linux-2.6.29-rc3.owrt/drivers/media/video/upd64083.c
+--- linux-2.6.29.owrt/drivers/media/video/upd64083.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/upd64083.c       2009-05-10 23:48:28.000000000 +0200
+@@ -21,6 +21,7 @@
+  * 02110-1301, USA.
+  */
++#include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/i2c.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/usbvision/usbvision-i2c.c linux-2.6.29-rc3.owrt/drivers/media/video/usbvision/usbvision-i2c.c
+--- linux-2.6.29.owrt/drivers/media/video/usbvision/usbvision-i2c.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/usbvision/usbvision-i2c.c        2009-05-10 23:48:28.000000000 +0200
+@@ -157,7 +157,7 @@
+       struct i2c_msg *pmsg;
+       struct usb_usbvision *usbvision;
+       int i, ret;
+-      unsigned char addr = 0;
++      unsigned char addr;
+       usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_ctrl.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_ctrl.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_ctrl.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_ctrl.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_ctrl.c  --  USB Video Class driver - Controls
+  *
+- *      Copyright (C) 2005-2009
++ *      Copyright (C) 2005-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -12,6 +12,7 @@
+  */
+ #include <linux/kernel.h>
++#include <linux/version.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
+ #include <linux/uaccess.h>
+@@ -28,7 +29,7 @@
+ #define UVC_CTRL_DATA_BACKUP  1
+ /* ------------------------------------------------------------------------
+- * Controls
++ * Control, formats, ...
+  */
+ static struct uvc_control_info uvc_ctrls[] = {
+@@ -634,7 +635,7 @@
+               mask = (1 << bits) - 1;
+       }
+-      /* Sign-extend the value if needed. */
++      /* Sign-extend the value if needed */
+       if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED)
+               value |= -(value & (1 << (mapping->size - 1)));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_driver.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_driver.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_driver.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_driver.c 2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_driver.c  --  USB Video Class driver
+  *
+- *      Copyright (C) 2005-2009
++ *      Copyright (C) 2005-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -24,6 +24,7 @@
+  */
+ #include <linux/kernel.h>
++#include <linux/version.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
+ #include <linux/usb.h>
+@@ -48,7 +49,7 @@
+ unsigned int uvc_trace_param;
+ /* ------------------------------------------------------------------------
+- * Video formats
++ * Control, formats, ...
+  */
+ static struct uvc_format_desc uvc_fmts[] = {
+@@ -473,7 +474,7 @@
+               /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize
+                * completely. Observed behaviours range from setting the
+-               * value to 1.1x the actual frame size to hardwiring the
++               * value to 1.1x the actual frame size of hardwiring the
+                * 16 low bits to 0. This results in a higher than necessary
+                * memory usage as well as a wrong image size information. For
+                * uncompressed formats this can be fixed by computing the
+@@ -486,7 +487,7 @@
+               /* Some bogus devices report dwMinFrameInterval equal to
+                * dwMaxFrameInterval and have dwFrameIntervalStep set to
+                * zero. Setting all null intervals to 1 fixes the problem and
+-               * some other divisions by zero that could happen.
++               * some other divisions by zero which could happen.
+                */
+               for (i = 0; i < n; ++i) {
+                       interval = get_unaligned_le32(&buffer[26+4*i]);
+@@ -1199,13 +1200,13 @@
+  * Scan the UVC descriptors to locate a chain starting at an Output Terminal
+  * and containing the following units:
+  *
+- * - one Output Terminal (USB Streaming or Display)
++ * - a USB Streaming Output Terminal
+  * - zero or one Processing Unit
+  * - zero, one or mode single-input Selector Units
+  * - zero or one multiple-input Selector Units, provided all inputs are
+  *   connected to input terminals
+  * - zero, one or mode single-input Extension Units
+- * - one or more Input Terminals (Camera, External or USB Streaming)
++ * - one Camera Input Terminal, or one or more External terminals.
+  *
+  * A side forward scan is made on each detected entity to check for additional
+  * extension units.
+@@ -1530,6 +1531,10 @@
+       /* Set the driver data before calling video_register_device, otherwise
+        * uvc_v4l2_open might race us.
++       *
++       * FIXME: usb_set_intfdata hasn't been called so far. Is that a
++       *        problem ? Does any function which could be called here get
++       *        a pointer to the usb_interface ?
+        */
+       dev->video.vdev = vdev;
+       video_set_drvdata(vdev, &dev->video);
+@@ -1564,7 +1569,7 @@
+       struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
+       struct list_head *p, *n;
+-      /* Unregister the video device. */
++      /* Unregister the video device */
+       uvc_unregister_video(dev);
+       usb_put_intf(dev->intf);
+       usb_put_dev(dev->udev);
+@@ -1607,7 +1612,7 @@
+               uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
+                               udev->devpath);
+-      /* Allocate memory for the device and initialize it. */
++      /* Allocate memory for the device and initialize it */
+       if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL)
+               return -ENOMEM;
+@@ -1628,14 +1633,14 @@
+                       le16_to_cpu(udev->descriptor.idVendor),
+                       le16_to_cpu(udev->descriptor.idProduct));
+-      /* Parse the Video Class control descriptor. */
++      /* Parse the Video Class control descriptor */
+       if (uvc_parse_control(dev) < 0) {
+               uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
+                       "descriptors.\n");
+               goto error;
+       }
+-      uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n",
++      uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n",
+               dev->uvc_version >> 8, dev->uvc_version & 0xff,
+               udev->product ? udev->product : "<unnamed>",
+               le16_to_cpu(udev->descriptor.idVendor),
+@@ -1648,18 +1653,18 @@
+                       "linux-uvc-devel mailing list.\n");
+       }
+-      /* Initialize controls. */
++      /* Initialize controls */
+       if (uvc_ctrl_init_device(dev) < 0)
+               goto error;
+-      /* Register the video devices. */
++      /* Register the video devices */
+       if (uvc_register_video(dev) < 0)
+               goto error;
+-      /* Save our data pointer in the interface data. */
++      /* Save our data pointer in the interface data */
+       usb_set_intfdata(intf, dev);
+-      /* Initialize the interrupt URB. */
++      /* Initialize the interrupt URB */
+       if ((ret = uvc_status_init(dev)) < 0) {
+               uvc_printk(KERN_INFO, "Unable to initialize the status "
+                       "endpoint (%d), status interrupt will not be "
+@@ -1834,24 +1839,24 @@
+         .bInterfaceSubClass   = 1,
+         .bInterfaceProtocol   = 0 },
+       /* Apple Built-In iSight */
+-      { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
++      { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+                               | USB_DEVICE_ID_MATCH_INT_INFO,
+         .idVendor             = 0x05ac,
+         .idProduct            = 0x8501,
+-        .bInterfaceClass      = USB_CLASS_VIDEO,
+-        .bInterfaceSubClass   = 1,
+-        .bInterfaceProtocol   = 0,
++        .bInterfaceClass      = USB_CLASS_VIDEO,
++        .bInterfaceSubClass   = 1,
++        .bInterfaceProtocol   = 0,
+         .driver_info          = UVC_QUIRK_PROBE_MINMAX
+                               | UVC_QUIRK_BUILTIN_ISIGHT },
+       /* Genesys Logic USB 2.0 PC Camera */
+-      { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
++      { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+                               | USB_DEVICE_ID_MATCH_INT_INFO,
+-        .idVendor             = 0x05e3,
+-        .idProduct            = 0x0505,
+-        .bInterfaceClass      = USB_CLASS_VIDEO,
+-        .bInterfaceSubClass   = 1,
+-        .bInterfaceProtocol   = 0,
+-        .driver_info          = UVC_QUIRK_STREAM_NO_FID },
++        .idVendor             = 0x05e3,
++        .idProduct            = 0x0505,
++        .bInterfaceClass      = USB_CLASS_VIDEO,
++        .bInterfaceSubClass   = 1,
++        .bInterfaceProtocol   = 0,
++        .driver_info          = UVC_QUIRK_STREAM_NO_FID },
+       /* MT6227 */
+       { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+                               | USB_DEVICE_ID_MATCH_INT_INFO,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_isight.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_isight.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_isight.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_isight.c 2009-05-10 23:48:28.000000000 +0200
+@@ -3,8 +3,6 @@
+  *
+  *    Copyright (C) 2006-2007
+  *            Ivan N. Zlatev <contact@i-nz.net>
+- *    Copyright (C) 2008-2009
+- *            Laurent Pinchart <laurent.pinchart@skynet.be>
+  *
+  *      This program is free software; you can redistribute it and/or modify
+  *      it under the terms of the GNU General Public License as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_queue.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_queue.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_queue.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_queue.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_queue.c  --  USB Video Class driver - Buffers management
+  *
+- *      Copyright (C) 2005-2009
++ *      Copyright (C) 2005-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -12,6 +12,7 @@
+  */
+ #include <linux/kernel.h>
++#include <linux/version.h>
+ #include <linux/mm.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
+@@ -36,22 +37,22 @@
+  * to user space will return -EBUSY.
+  *
+  * Video buffers are managed using two queues. However, unlike most USB video
+- * drivers that use an in queue and an out queue, we use a main queue to hold
+- * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to
+- * hold empty buffers. This design (copied from video-buf) minimizes locking
+- * in interrupt, as only one queue is shared between interrupt and user
+- * contexts.
++ * drivers which use an in queue and an out queue, we use a main queue which
++ * holds all queued buffers (both 'empty' and 'done' buffers), and an irq
++ * queue which holds empty buffers. This design (copied from video-buf)
++ * minimizes locking in interrupt, as only one queue is shared between
++ * interrupt and user contexts.
+  *
+  * Use cases
+  * ---------
+  *
+- * Unless stated otherwise, all operations that modify the irq buffers queue
++ * Unless stated otherwise, all operations which modify the irq buffers queue
+  * are protected by the irq spinlock.
+  *
+  * 1. The user queues the buffers, starts streaming and dequeues a buffer.
+  *
+  *    The buffers are added to the main and irq queues. Both operations are
+- *    protected by the queue lock, and the later is protected by the irq
++ *    protected by the queue lock, and the latert is protected by the irq
+  *    spinlock as well.
+  *
+  *    The completion handler fetches a buffer from the irq queue and fills it
+@@ -59,7 +60,7 @@
+  *    returns immediately.
+  *
+  *    When the buffer is full, the completion handler removes it from the irq
+- *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
++ *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue.
+  *    At that point, any process waiting on the buffer will be woken up. If a
+  *    process tries to dequeue a buffer after it has been marked ready, the
+  *    dequeing will succeed immediately.
+@@ -90,8 +91,8 @@
+ /*
+  * Allocate the video buffers.
+  *
+- * Pages are reserved to make sure they will not be swapped, as they will be
+- * filled in the URB completion handler.
++ * Pages are reserved to make sure they will not be swaped, as they will be
++ * filled in URB completion handler.
+  *
+  * Buffers will be individually mapped, so they must all be page aligned.
+  */
+@@ -209,8 +210,8 @@
+       __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
+ done:
+-      mutex_unlock(&queue->mutex);
+-      return ret;
++       mutex_unlock(&queue->mutex);
++       return ret;
+ }
+ /*
+@@ -235,7 +236,7 @@
+       }
+       mutex_lock(&queue->mutex);
+-      if (v4l2_buf->index >= queue->count) {
++      if (v4l2_buf->index >= queue->count)  {
+               uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
+               ret = -EINVAL;
+               goto done;
+@@ -428,7 +429,7 @@
+  * Cancel the video buffers queue.
+  *
+  * Cancelling the queue marks all buffers on the irq queue as erroneous,
+- * wakes them up and removes them from the queue.
++ * wakes them up and remove them from the queue.
+  *
+  * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+  * fail with -ENODEV.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_status.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_status.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_status.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_status.c 2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_status.c  --  USB Video Class driver - Status endpoint
+  *
+- *      Copyright (C) 2007-2009
++ *      Copyright (C) 2007-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -12,6 +12,7 @@
+  */
+ #include <linux/kernel.h>
++#include <linux/version.h>
+ #include <linux/input.h>
+ #include <linux/usb.h>
+ #include <linux/usb/input.h>
+@@ -46,8 +47,8 @@
+       usb_to_input_id(udev, &input->id);
+       input->dev.parent = &dev->intf->dev;
+-      __set_bit(EV_KEY, input->evbit);
+-      __set_bit(KEY_CAMERA, input->keybit);
++      set_bit(EV_KEY, input->evbit);
++      set_bit(BTN_0, input->keybit);
+       if ((ret = input_register_device(input)) < 0)
+               goto error;
+@@ -70,10 +71,8 @@
+ static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
+       int value)
+ {
+-      if (dev->input) {
++      if (dev->input)
+               input_report_key(dev->input, code, value);
+-              input_sync(dev->input);
+-      }
+ }
+ #else
+@@ -98,7 +97,7 @@
+                       return;
+               uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
+                       data[1], data[3] ? "pressed" : "released", len);
+-              uvc_input_report_key(dev, KEY_CAMERA, data[3]);
++              uvc_input_report_key(dev, BTN_0, data[3]);
+       } else {
+               uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
+                       "len %d.\n", data[1], data[2], data[3], len);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_v4l2.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_v4l2.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_v4l2.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_v4l2.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_v4l2.c  --  USB Video Class driver - V4L2 API
+  *
+- *      Copyright (C) 2005-2009
++ *      Copyright (C) 2005-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -37,7 +37,7 @@
+  * must be grouped (for instance the Red Balance, Blue Balance and Do White
+  * Balance V4L2 controls use the White Balance Component UVC control) or
+  * otherwise translated. The approach we take here is to use a translation
+- * table for the controls that can be mapped directly, and handle the others
++ * table for the controls which can be mapped directly, and handle the others
+  * manually.
+  */
+ static int uvc_v4l2_query_menu(struct uvc_video_device *video,
+@@ -189,7 +189,7 @@
+               probe->dwMaxVideoFrameSize =
+                       video->streaming->ctrl.dwMaxVideoFrameSize;
+-      /* Probe the device. */
++      /* Probe the device */
+       if ((ret = uvc_probe_video(video, probe)) < 0)
+               goto done;
+@@ -354,11 +354,11 @@
+  *
+  * Each open instance of a UVC device can either be in a privileged or
+  * unprivileged state. Only a single instance can be in a privileged state at
+- * a given time. Trying to perform an operation that requires privileges will
++ * a given time. Trying to perform an operation which requires privileges will
+  * automatically acquire the required privileges if possible, or return -EBUSY
+  * otherwise. Privileges are dismissed when closing the instance.
+  *
+- * Operations that require privileges are:
++ * Operations which require privileges are:
+  *
+  * - VIDIOC_S_INPUT
+  * - VIDIOC_S_PARM
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvc_video.c linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_video.c
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvc_video.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvc_video.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *      uvc_video.c  --  USB Video Class driver - Video handling
+  *
+- *      Copyright (C) 2005-2009
++ *      Copyright (C) 2005-2008
+  *          Laurent Pinchart (laurent.pinchart@skynet.be)
+  *
+  *      This program is free software; you can redistribute it and/or modify
+@@ -12,6 +12,7 @@
+  */
+ #include <linux/kernel.h>
++#include <linux/version.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
+ #include <linux/usb.h>
+@@ -114,7 +115,7 @@
+               ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
+               ret = 0;
+               goto out;
+-      } else if (query == GET_DEF && probe == 1 && ret != size) {
++      } else if (query == GET_DEF && probe == 1) {
+               /* Many cameras don't support the GET_DEF request on their
+                * video probe control. Warn once and return, the caller will
+                * fall back to GET_CUR.
+@@ -159,7 +160,7 @@
+       }
+       /* Some broken devices return a null or wrong dwMaxVideoFrameSize.
+-       * Try to get the value from the format and frame descriptors.
++       * Try to get the value from the format and frame descriptor.
+        */
+       uvc_fixup_buffer_size(video, ctrl);
+       ret = 0;
+@@ -190,6 +191,9 @@
+       *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
+       *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
+       *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
++      /* Note: Some of the fields below are not required for IN devices (see
++       * UVC spec, 4.3.1.1), but we still copy them in case support for OUT
++       * devices is added in the future. */
+       put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
+       put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);
+@@ -396,7 +400,7 @@
+        *
+        * Empty buffers (bytesused == 0) don't trigger end of frame detection
+        * as it doesn't make sense to return an empty buffer. This also
+-       * avoids detecting end of frame conditions at FID toggling if the
++       * avoids detecting and of frame conditions at FID toggling if the
+        * previous payload had the EOF bit set.
+        */
+       if (fid != video->last_fid && buf->buf.bytesused != 0) {
+@@ -449,17 +453,6 @@
+       }
+ }
+-/* Video payload encoding is handled by uvc_video_encode_header() and
+- * uvc_video_encode_data(). Only bulk transfers are currently supported.
+- *
+- * uvc_video_encode_header is called at the start of a payload. It adds header
+- * data to the transfer buffer and returns the header size. As the only known
+- * UVC output device transfers a whole frame in a single payload, the EOF bit
+- * is always set in the header.
+- *
+- * uvc_video_encode_data is called for every URB and copies the data from the
+- * video buffer to the transfer buffer.
+- */
+ static int uvc_video_encode_header(struct uvc_video_device *video,
+               struct uvc_buffer *buf, __u8 *data, int len)
+ {
+@@ -960,7 +953,7 @@
+ }
+ /*
+- * Reconfigure the video interface and restart streaming if it was enabled
++ * Reconfigure the video interface and restart streaming if it was enable
+  * before suspend.
+  *
+  * If an error occurs, disable the video queue. This will wake all pending
+@@ -992,8 +985,8 @@
+  */
+ /*
+- * Initialize the UVC video device by switching to alternate setting 0 and
+- * retrieve the default format.
++ * Initialize the UVC video device by retrieving the default format and
++ * committing it.
+  *
+  * Some cameras (namely the Fuji Finepix) set the format and frame
+  * indexes to zero. The UVC standard doesn't clearly make this a spec
+@@ -1021,7 +1014,7 @@
+        */
+       usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
+-      /* Some webcams don't suport GET_DEF requests on the probe control. We
++      /* Some webcams don't suport GET_DEF request on the probe control. We
+        * fall back to GET_CUR if GET_DEF fails.
+        */
+       if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 &&
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/uvc/uvcvideo.h linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvcvideo.h
+--- linux-2.6.29.owrt/drivers/media/video/uvc/uvcvideo.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/uvc/uvcvideo.h   2009-05-10 23:48:28.000000000 +0200
+@@ -72,149 +72,149 @@
+  * UVC constants
+  */
+-#define SC_UNDEFINED                  0x00
+-#define SC_VIDEOCONTROL                       0x01
+-#define SC_VIDEOSTREAMING             0x02
+-#define SC_VIDEO_INTERFACE_COLLECTION 0x03
+-
+-#define PC_PROTOCOL_UNDEFINED         0x00
+-
+-#define CS_UNDEFINED                  0x20
+-#define CS_DEVICE                     0x21
+-#define CS_CONFIGURATION              0x22
+-#define CS_STRING                     0x23
+-#define CS_INTERFACE                  0x24
+-#define CS_ENDPOINT                   0x25
++#define SC_UNDEFINED                    0x00
++#define SC_VIDEOCONTROL                 0x01
++#define SC_VIDEOSTREAMING               0x02
++#define SC_VIDEO_INTERFACE_COLLECTION   0x03
++
++#define PC_PROTOCOL_UNDEFINED           0x00
++
++#define CS_UNDEFINED                    0x20
++#define CS_DEVICE                       0x21
++#define CS_CONFIGURATION                0x22
++#define CS_STRING                       0x23
++#define CS_INTERFACE                    0x24
++#define CS_ENDPOINT                     0x25
+ /* VideoControl class specific interface descriptor */
+-#define VC_DESCRIPTOR_UNDEFINED               0x00
+-#define VC_HEADER                     0x01
+-#define VC_INPUT_TERMINAL             0x02
+-#define VC_OUTPUT_TERMINAL            0x03
+-#define VC_SELECTOR_UNIT              0x04
+-#define VC_PROCESSING_UNIT            0x05
+-#define VC_EXTENSION_UNIT             0x06
++#define VC_DESCRIPTOR_UNDEFINED         0x00
++#define VC_HEADER                       0x01
++#define VC_INPUT_TERMINAL               0x02
++#define VC_OUTPUT_TERMINAL              0x03
++#define VC_SELECTOR_UNIT                0x04
++#define VC_PROCESSING_UNIT              0x05
++#define VC_EXTENSION_UNIT               0x06
+ /* VideoStreaming class specific interface descriptor */
+-#define VS_UNDEFINED                  0x00
+-#define VS_INPUT_HEADER                       0x01
+-#define VS_OUTPUT_HEADER              0x02
+-#define VS_STILL_IMAGE_FRAME          0x03
+-#define VS_FORMAT_UNCOMPRESSED                0x04
+-#define VS_FRAME_UNCOMPRESSED         0x05
+-#define VS_FORMAT_MJPEG                       0x06
+-#define VS_FRAME_MJPEG                        0x07
+-#define VS_FORMAT_MPEG2TS             0x0a
+-#define VS_FORMAT_DV                  0x0c
+-#define VS_COLORFORMAT                        0x0d
+-#define VS_FORMAT_FRAME_BASED         0x10
+-#define VS_FRAME_FRAME_BASED          0x11
+-#define VS_FORMAT_STREAM_BASED                0x12
++#define VS_UNDEFINED                    0x00
++#define VS_INPUT_HEADER                 0x01
++#define VS_OUTPUT_HEADER                0x02
++#define VS_STILL_IMAGE_FRAME            0x03
++#define VS_FORMAT_UNCOMPRESSED          0x04
++#define VS_FRAME_UNCOMPRESSED           0x05
++#define VS_FORMAT_MJPEG                 0x06
++#define VS_FRAME_MJPEG                  0x07
++#define VS_FORMAT_MPEG2TS               0x0a
++#define VS_FORMAT_DV                    0x0c
++#define VS_COLORFORMAT                  0x0d
++#define VS_FORMAT_FRAME_BASED           0x10
++#define VS_FRAME_FRAME_BASED            0x11
++#define VS_FORMAT_STREAM_BASED          0x12
+ /* Endpoint type */
+-#define EP_UNDEFINED                  0x00
+-#define EP_GENERAL                    0x01
+-#define EP_ENDPOINT                   0x02
+-#define EP_INTERRUPT                  0x03
++#define EP_UNDEFINED                    0x00
++#define EP_GENERAL                      0x01
++#define EP_ENDPOINT                     0x02
++#define EP_INTERRUPT                    0x03
+ /* Request codes */
+-#define RC_UNDEFINED                  0x00
+-#define SET_CUR                               0x01
+-#define GET_CUR                               0x81
+-#define GET_MIN                               0x82
+-#define GET_MAX                               0x83
+-#define GET_RES                               0x84
+-#define GET_LEN                               0x85
+-#define GET_INFO                      0x86
+-#define GET_DEF                               0x87
++#define RC_UNDEFINED                    0x00
++#define SET_CUR                         0x01
++#define GET_CUR                         0x81
++#define GET_MIN                         0x82
++#define GET_MAX                         0x83
++#define GET_RES                         0x84
++#define GET_LEN                         0x85
++#define GET_INFO                        0x86
++#define GET_DEF                         0x87
+ /* VideoControl interface controls */
+-#define VC_CONTROL_UNDEFINED          0x00
+-#define VC_VIDEO_POWER_MODE_CONTROL   0x01
+-#define VC_REQUEST_ERROR_CODE_CONTROL 0x02
++#define VC_CONTROL_UNDEFINED            0x00
++#define VC_VIDEO_POWER_MODE_CONTROL     0x01
++#define VC_REQUEST_ERROR_CODE_CONTROL   0x02
+ /* Terminal controls */
+-#define TE_CONTROL_UNDEFINED          0x00
++#define TE_CONTROL_UNDEFINED            0x00
+ /* Selector Unit controls */
+-#define SU_CONTROL_UNDEFINED          0x00
+-#define SU_INPUT_SELECT_CONTROL               0x01
++#define SU_CONTROL_UNDEFINED            0x00
++#define SU_INPUT_SELECT_CONTROL         0x01
+ /* Camera Terminal controls */
+-#define CT_CONTROL_UNDEFINED                          0x00
+-#define CT_SCANNING_MODE_CONTROL                      0x01
+-#define CT_AE_MODE_CONTROL                            0x02
+-#define CT_AE_PRIORITY_CONTROL                                0x03
+-#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL             0x04
+-#define CT_EXPOSURE_TIME_RELATIVE_CONTROL             0x05
+-#define CT_FOCUS_ABSOLUTE_CONTROL                     0x06
+-#define CT_FOCUS_RELATIVE_CONTROL                     0x07
+-#define CT_FOCUS_AUTO_CONTROL                         0x08
+-#define CT_IRIS_ABSOLUTE_CONTROL                      0x09
+-#define CT_IRIS_RELATIVE_CONTROL                      0x0a
+-#define CT_ZOOM_ABSOLUTE_CONTROL                      0x0b
+-#define CT_ZOOM_RELATIVE_CONTROL                      0x0c
+-#define CT_PANTILT_ABSOLUTE_CONTROL                   0x0d
+-#define CT_PANTILT_RELATIVE_CONTROL                   0x0e
+-#define CT_ROLL_ABSOLUTE_CONTROL                      0x0f
+-#define CT_ROLL_RELATIVE_CONTROL                      0x10
+-#define CT_PRIVACY_CONTROL                            0x11
++#define CT_CONTROL_UNDEFINED                          0x00
++#define CT_SCANNING_MODE_CONTROL                      0x01
++#define CT_AE_MODE_CONTROL                            0x02
++#define CT_AE_PRIORITY_CONTROL                        0x03
++#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL               0x04
++#define CT_EXPOSURE_TIME_RELATIVE_CONTROL               0x05
++#define CT_FOCUS_ABSOLUTE_CONTROL                     0x06
++#define CT_FOCUS_RELATIVE_CONTROL                     0x07
++#define CT_FOCUS_AUTO_CONTROL                         0x08
++#define CT_IRIS_ABSOLUTE_CONTROL                      0x09
++#define CT_IRIS_RELATIVE_CONTROL                      0x0a
++#define CT_ZOOM_ABSOLUTE_CONTROL                      0x0b
++#define CT_ZOOM_RELATIVE_CONTROL                      0x0c
++#define CT_PANTILT_ABSOLUTE_CONTROL                   0x0d
++#define CT_PANTILT_RELATIVE_CONTROL                   0x0e
++#define CT_ROLL_ABSOLUTE_CONTROL                      0x0f
++#define CT_ROLL_RELATIVE_CONTROL                      0x10
++#define CT_PRIVACY_CONTROL                            0x11
+ /* Processing Unit controls */
+-#define PU_CONTROL_UNDEFINED                          0x00
+-#define PU_BACKLIGHT_COMPENSATION_CONTROL             0x01
+-#define PU_BRIGHTNESS_CONTROL                         0x02
+-#define PU_CONTRAST_CONTROL                           0x03
+-#define PU_GAIN_CONTROL                                       0x04
+-#define PU_POWER_LINE_FREQUENCY_CONTROL                       0x05
+-#define PU_HUE_CONTROL                                        0x06
+-#define PU_SATURATION_CONTROL                         0x07
+-#define PU_SHARPNESS_CONTROL                          0x08
+-#define PU_GAMMA_CONTROL                              0x09
+-#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL          0x0a
+-#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL     0x0b
+-#define PU_WHITE_BALANCE_COMPONENT_CONTROL            0x0c
+-#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL               0x0d
+-#define PU_DIGITAL_MULTIPLIER_CONTROL                 0x0e
+-#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL           0x0f
+-#define PU_HUE_AUTO_CONTROL                           0x10
+-#define PU_ANALOG_VIDEO_STANDARD_CONTROL              0x11
+-#define PU_ANALOG_LOCK_STATUS_CONTROL                 0x12
++#define PU_CONTROL_UNDEFINED                          0x00
++#define PU_BACKLIGHT_COMPENSATION_CONTROL               0x01
++#define PU_BRIGHTNESS_CONTROL                         0x02
++#define PU_CONTRAST_CONTROL                           0x03
++#define PU_GAIN_CONTROL                               0x04
++#define PU_POWER_LINE_FREQUENCY_CONTROL               0x05
++#define PU_HUE_CONTROL                                0x06
++#define PU_SATURATION_CONTROL                         0x07
++#define PU_SHARPNESS_CONTROL                          0x08
++#define PU_GAMMA_CONTROL                              0x09
++#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL            0x0a
++#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL       0x0b
++#define PU_WHITE_BALANCE_COMPONENT_CONTROL              0x0c
++#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL         0x0d
++#define PU_DIGITAL_MULTIPLIER_CONTROL                 0x0e
++#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL             0x0f
++#define PU_HUE_AUTO_CONTROL                           0x10
++#define PU_ANALOG_VIDEO_STANDARD_CONTROL                0x11
++#define PU_ANALOG_LOCK_STATUS_CONTROL                 0x12
+ #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL            0x01
+ #define LXU_MOTOR_PANTILT_RESET_CONTROL                       0x02
+ #define LXU_MOTOR_FOCUS_MOTOR_CONTROL                 0x03
+ /* VideoStreaming interface controls */
+-#define VS_CONTROL_UNDEFINED          0x00
+-#define VS_PROBE_CONTROL              0x01
+-#define VS_COMMIT_CONTROL             0x02
+-#define VS_STILL_PROBE_CONTROL                0x03
+-#define VS_STILL_COMMIT_CONTROL               0x04
+-#define VS_STILL_IMAGE_TRIGGER_CONTROL        0x05
+-#define VS_STREAM_ERROR_CODE_CONTROL  0x06
+-#define VS_GENERATE_KEY_FRAME_CONTROL 0x07
+-#define VS_UPDATE_FRAME_SEGMENT_CONTROL       0x08
+-#define VS_SYNC_DELAY_CONTROL         0x09
++#define VS_CONTROL_UNDEFINED            0x00
++#define VS_PROBE_CONTROL                0x01
++#define VS_COMMIT_CONTROL               0x02
++#define VS_STILL_PROBE_CONTROL          0x03
++#define VS_STILL_COMMIT_CONTROL         0x04
++#define VS_STILL_IMAGE_TRIGGER_CONTROL  0x05
++#define VS_STREAM_ERROR_CODE_CONTROL    0x06
++#define VS_GENERATE_KEY_FRAME_CONTROL   0x07
++#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
++#define VS_SYNC_DELAY_CONTROL           0x09
+-#define TT_VENDOR_SPECIFIC            0x0100
+-#define TT_STREAMING                  0x0101
++#define TT_VENDOR_SPECIFIC              0x0100
++#define TT_STREAMING                    0x0101
+ /* Input Terminal types */
+-#define ITT_VENDOR_SPECIFIC           0x0200
+-#define ITT_CAMERA                    0x0201
+-#define ITT_MEDIA_TRANSPORT_INPUT     0x0202
++#define ITT_VENDOR_SPECIFIC             0x0200
++#define ITT_CAMERA                      0x0201
++#define ITT_MEDIA_TRANSPORT_INPUT       0x0202
+ /* Output Terminal types */
+-#define OTT_VENDOR_SPECIFIC           0x0300
+-#define OTT_DISPLAY                   0x0301
+-#define OTT_MEDIA_TRANSPORT_OUTPUT    0x0302
++#define OTT_VENDOR_SPECIFIC             0x0300
++#define OTT_DISPLAY                     0x0301
++#define OTT_MEDIA_TRANSPORT_OUTPUT      0x0302
+ /* External Terminal types */
+-#define EXTERNAL_VENDOR_SPECIFIC      0x0400
+-#define COMPOSITE_CONNECTOR           0x0401
+-#define SVIDEO_CONNECTOR              0x0402
+-#define COMPONENT_CONNECTOR           0x0403
++#define EXTERNAL_VENDOR_SPECIFIC        0x0400
++#define COMPOSITE_CONNECTOR             0x0401
++#define SVIDEO_CONNECTOR                0x0402
++#define COMPONENT_CONNECTOR             0x0403
+ #define UVC_TERM_INPUT                        0x0000
+ #define UVC_TERM_OUTPUT                       0x8000
+@@ -541,11 +541,11 @@
+ };
+ enum uvc_buffer_state {
+-      UVC_BUF_STATE_IDLE      = 0,
+-      UVC_BUF_STATE_QUEUED    = 1,
+-      UVC_BUF_STATE_ACTIVE    = 2,
+-      UVC_BUF_STATE_DONE      = 3,
+-      UVC_BUF_STATE_ERROR     = 4,
++      UVC_BUF_STATE_IDLE       = 0,
++      UVC_BUF_STATE_QUEUED     = 1,
++      UVC_BUF_STATE_ACTIVE     = 2,
++      UVC_BUF_STATE_DONE       = 3,
++      UVC_BUF_STATE_ERROR      = 4,
+ };
+ struct uvc_buffer {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/v4l2-subdev.c linux-2.6.29-rc3.owrt/drivers/media/video/v4l2-subdev.c
+--- linux-2.6.29.owrt/drivers/media/video/v4l2-subdev.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/v4l2-subdev.c    2009-05-10 23:48:28.000000000 +0200
+@@ -28,13 +28,13 @@
+ {
+       switch (cmd) {
+       case VIDIOC_QUERYCTRL:
+-              return v4l2_subdev_call(sd, core, queryctrl, arg);
++              return v4l2_subdev_call(sd, core, querymenu, arg);
+       case VIDIOC_G_CTRL:
+               return v4l2_subdev_call(sd, core, g_ctrl, arg);
+       case VIDIOC_S_CTRL:
+               return v4l2_subdev_call(sd, core, s_ctrl, arg);
+       case VIDIOC_QUERYMENU:
+-              return v4l2_subdev_call(sd, core, querymenu, arg);
++              return v4l2_subdev_call(sd, core, queryctrl, arg);
+       case VIDIOC_LOG_STATUS:
+               return v4l2_subdev_call(sd, core, log_status);
+       case VIDIOC_DBG_G_CHIP_IDENT:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/zoran/Kconfig linux-2.6.29-rc3.owrt/drivers/media/video/zoran/Kconfig
+--- linux-2.6.29.owrt/drivers/media/video/zoran/Kconfig        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/zoran/Kconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -68,7 +68,6 @@
+       tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
+       depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
+       select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+-      select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
+       select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
+       help
+         Support for the AverMedia 6 Eyes video surveillance card.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/zoran/zoran_card.c linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_card.c
+--- linux-2.6.29.owrt/drivers/media/video/zoran/zoran_card.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_card.c       2009-05-10 23:48:28.000000000 +0200
+@@ -61,17 +61,17 @@
+ extern const struct zoran_format zoran_formats[];
+-static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
++static int card[BUZ_MAX] = { -1, -1, -1, -1 };
+ module_param_array(card, int, NULL, 0444);
+-MODULE_PARM_DESC(card, "Card type");
++MODULE_PARM_DESC(card, "The type of card");
+-static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
++static int encoder[BUZ_MAX] = { -1, -1, -1, -1 };
+ module_param_array(encoder, int, NULL, 0444);
+-MODULE_PARM_DESC(encoder, "Video encoder chip");
++MODULE_PARM_DESC(encoder, "i2c TV encoder");
+-static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
++static int decoder[BUZ_MAX] = { -1, -1, -1, -1 };
+ module_param_array(decoder, int, NULL, 0444);
+-MODULE_PARM_DESC(decoder, "Video decoder chip");
++MODULE_PARM_DESC(decoder, "i2c TV decoder");
+ /*
+    The video mem address of the video card.
+@@ -104,9 +104,9 @@
+ MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
+ /* /dev/videoN, -1 for autodetect */
+-static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
++static int video_nr[BUZ_MAX] = {-1, -1, -1, -1};
+ module_param_array(video_nr, int, NULL, 0444);
+-MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)");
++MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)");
+ /*
+    Number and size of grab buffers for Video 4 Linux
+@@ -153,21 +153,9 @@
+ MODULE_AUTHOR("Serguei Miridonov");
+ MODULE_LICENSE("GPL");
+-#define ZR_DEVICE(subven, subdev, data)       { \
+-      .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
+-      .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) }
+-
+-static struct pci_device_id zr36067_pci_tbl[] = {
+-      ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus),
+-      ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus),
+-      ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10),
+-      ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ),
+-      ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS),
+-      {0}
+-};
+-MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
+-static unsigned int zoran_num;                /* number of cards found */
++int zoran_num;                        /* number of Buzs in use */
++struct zoran *zoran[BUZ_MAX];
+ /* videocodec bus functions ZR36060 */
+ static u32
+@@ -484,6 +472,8 @@
+       }, {
+               .type = DC10plus,
+               .name = "DC10plus",
++              .vendor_id = PCI_VENDOR_ID_MIRO,
++              .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS,
+               .i2c_decoder = I2C_DRIVERID_SAA7110,
+               .i2c_encoder = I2C_DRIVERID_ADV7175,
+               .video_codec = CODEC_TYPE_ZR36060,
+@@ -541,6 +531,8 @@
+       }, {
+               .type = DC30plus,
+               .name = "DC30plus",
++              .vendor_id = PCI_VENDOR_ID_MIRO,
++              .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS,
+               .i2c_decoder = I2C_DRIVERID_VPX3220,
+               .i2c_encoder = I2C_DRIVERID_ADV7175,
+               .video_codec = CODEC_TYPE_ZR36050,
+@@ -597,6 +589,8 @@
+       }, {
+               .type = LML33R10,
+               .name = "LML33R10",
++              .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH,
++              .device_id = PCI_DEVICE_ID_LML_33R10,
+               .i2c_decoder = I2C_DRIVERID_SAA7114,
+               .i2c_encoder = I2C_DRIVERID_ADV7170,
+               .video_codec = CODEC_TYPE_ZR36060,
+@@ -624,6 +618,8 @@
+       }, {
+               .type = BUZ,
+               .name = "Buz",
++              .vendor_id = PCI_VENDOR_ID_IOMEGA,
++              .device_id = PCI_DEVICE_ID_IOMEGA_BUZ,
+               .i2c_decoder = I2C_DRIVERID_SAA7111A,
+               .i2c_encoder = I2C_DRIVERID_SAA7185B,
+               .video_codec = CODEC_TYPE_ZR36060,
+@@ -653,6 +649,8 @@
+               .name = "6-Eyes",
+               /* AverMedia chose not to brand the 6-Eyes. Thus it
+                  can't be autodetected, and requires card=x. */
++              .vendor_id = -1,
++              .device_id = -1,
+               .i2c_decoder = I2C_DRIVERID_KS0127,
+               .i2c_encoder = I2C_DRIVERID_BT866,
+               .video_codec = CODEC_TYPE_ZR36060,
+@@ -1140,8 +1138,7 @@
+       strcpy(zr->video_dev->name, ZR_DEVNAME(zr));
+       err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]);
+       if (err < 0)
+-              goto exit_free;
+-      video_set_drvdata(zr->video_dev, zr);
++              goto exit_unregister;
+       zoran_init_hardware(zr);
+       if (zr36067_debug > 2)
+@@ -1156,19 +1153,19 @@
+       zr->initialized = 1;
+       return 0;
++exit_unregister:
++      zoran_unregister_i2c(zr);
+ exit_free:
+       kfree(zr->stat_com);
+       kfree(zr->video_dev);
+       return err;
+ }
+-static void __devexit zoran_remove(struct pci_dev *pdev)
++static void
++zoran_release (struct zoran *zr)
+ {
+-      struct zoran *zr = pci_get_drvdata(pdev);
+-
+       if (!zr->initialized)
+               goto exit_free;
+-
+       /* unregister videocodec bus */
+       if (zr->codec) {
+               struct videocodec_master *master = zr->codec->master_data;
+@@ -1197,7 +1194,6 @@
+       pci_disable_device(zr->pci_dev);
+       video_unregister_device(zr->video_dev);
+ exit_free:
+-      pci_set_drvdata(pdev, NULL);
+       kfree(zr);
+ }
+@@ -1260,329 +1256,338 @@
+  *   Scan for a Buz card (actually for the PCI controller ZR36057),
+  *   request the irq and map the io memory
+  */
+-static int __devinit zoran_probe(struct pci_dev *pdev,
+-                               const struct pci_device_id *ent)
++static int __devinit
++find_zr36057 (void)
+ {
+       unsigned char latency, need_latency;
+       struct zoran *zr;
++      struct pci_dev *dev = NULL;
+       int result;
+       struct videocodec_master *master_vfe = NULL;
+       struct videocodec_master *master_codec = NULL;
+       int card_num;
+       char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name;
+-      unsigned int nr;
+-
+-
+-      nr = zoran_num++;
+-      if (nr >= BUZ_MAX) {
+-              dprintk(1,
+-                      KERN_ERR
+-                      "%s: driver limited to %d card(s) maximum\n",
+-                      ZORAN_NAME, BUZ_MAX);
+-              return -ENOENT;
+-      }
+-      zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
+-      if (!zr) {
+-              dprintk(1,
+-                      KERN_ERR
+-                      "%s: find_zr36057() - kzalloc failed\n",
+-                      ZORAN_NAME);
+-              return -ENOMEM;
+-      }
+-      zr->pci_dev = pdev;
+-      zr->id = nr;
+-      snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
+-      spin_lock_init(&zr->spinlock);
+-      mutex_init(&zr->resource_lock);
+-      if (pci_enable_device(pdev))
+-              goto zr_free_mem;
+-      pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
++      zoran_num = 0;
++      while (zoran_num < BUZ_MAX &&
++             (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) {
++              card_num = card[zoran_num];
++              zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
++              if (!zr) {
++                      dprintk(1,
++                              KERN_ERR
++                              "%s: find_zr36057() - kzalloc failed\n",
++                              ZORAN_NAME);
++                      continue;
++              }
++              zr->pci_dev = dev;
++              //zr->zr36057_mem = NULL;
++              zr->id = zoran_num;
++              snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
++              spin_lock_init(&zr->spinlock);
++              mutex_init(&zr->resource_lock);
++              if (pci_enable_device(dev))
++                      goto zr_free_mem;
++              zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0);
++              pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION,
++                                   &zr->revision);
++              if (zr->revision < 2) {
++                      dprintk(1,
++                              KERN_INFO
++                              "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n",
++                              ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
++                              zr->zr36057_adr);
+-      dprintk(1,
+-              KERN_INFO
+-              "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n",
+-              ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision,
+-              zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0));
+-      if (zr->revision >= 2) {
+-              dprintk(1,
+-                      KERN_INFO
+-                      "%s: Subsystem vendor=0x%04x id=0x%04x\n",
+-                      ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor,
+-                      zr->pci_dev->subsystem_device);
+-      }
++                      if (card_num == -1) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - no card specified, please use the card=X insmod option\n",
++                                      ZR_DEVNAME(zr));
++                              goto zr_free_mem;
++                      }
++              } else {
++                      int i;
++                      unsigned short ss_vendor, ss_device;
+-      /* Use auto-detected card type? */
+-      if (card[nr] == -1) {
+-              if (zr->revision < 2) {
++                      ss_vendor = zr->pci_dev->subsystem_vendor;
++                      ss_device = zr->pci_dev->subsystem_device;
+                       dprintk(1,
+-                              KERN_ERR
+-                              "%s: No card type specified, please use the card=X module parameter\n",
+-                              ZR_DEVNAME(zr));
++                              KERN_INFO
++                              "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n",
++                              ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
++                              zr->zr36057_adr);
+                       dprintk(1,
++                              KERN_INFO
++                              "%s: subsystem vendor=0x%04x id=0x%04x\n",
++                              ZR_DEVNAME(zr), ss_vendor, ss_device);
++                      if (card_num == -1) {
++                              dprintk(3,
++                                      KERN_DEBUG
++                                      "%s: find_zr36057() - trying to autodetect card type\n",
++                                      ZR_DEVNAME(zr));
++                              for (i=0;i<NUM_CARDS;i++) {
++                                      if (ss_vendor == zoran_cards[i].vendor_id &&
++                                          ss_device == zoran_cards[i].device_id) {
++                                              dprintk(3,
++                                                      KERN_DEBUG
++                                                      "%s: find_zr36057() - card %s detected\n",
++                                                      ZR_DEVNAME(zr),
++                                                      zoran_cards[i].name);
++                                              card_num = i;
++                                              break;
++                                      }
++                              }
++                              if (i == NUM_CARDS) {
++                                      dprintk(1,
++                                              KERN_ERR
++                                              "%s: find_zr36057() - unknown card\n",
++                                              ZR_DEVNAME(zr));
++                                      goto zr_free_mem;
++                              }
++                      }
++              }
++
++              if (card_num < 0 || card_num >= NUM_CARDS) {
++                      dprintk(2,
+                               KERN_ERR
+-                              "%s: It is not possible to auto-detect ZR36057 based cards\n",
+-                              ZR_DEVNAME(zr));
++                              "%s: find_zr36057() - invalid cardnum %d\n",
++                              ZR_DEVNAME(zr), card_num);
+                       goto zr_free_mem;
+               }
+-              card_num = ent->driver_data;
+-              if (card_num >= NUM_CARDS) {
++              /* even though we make this a non pointer and thus
++               * theoretically allow for making changes to this struct
++               * on a per-individual card basis at runtime, this is
++               * strongly discouraged. This structure is intended to
++               * keep general card information, no settings or anything */
++              zr->card = zoran_cards[card_num];
++              snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
++                       "%s[%u]", zr->card.name, zr->id);
++
++              zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000);
++              if (!zr->zr36057_mem) {
+                       dprintk(1,
+                               KERN_ERR
+-                              "%s: Unknown card, try specifying card=X module parameter\n",
++                              "%s: find_zr36057() - ioremap failed\n",
+                               ZR_DEVNAME(zr));
+                       goto zr_free_mem;
+               }
+-              dprintk(3,
+-                      KERN_DEBUG
+-                      "%s: %s() - card %s detected\n",
+-                      ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name);
+-      } else {
+-              card_num = card[nr];
+-              if (card_num >= NUM_CARDS || card_num < 0) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: User specified card type %d out of range (0 .. %d)\n",
+-                              ZR_DEVNAME(zr), card_num, NUM_CARDS - 1);
+-                      goto zr_free_mem;
++
++              result = request_irq(zr->pci_dev->irq,
++                                   zoran_irq,
++                                   IRQF_SHARED | IRQF_DISABLED,
++                                   ZR_DEVNAME(zr),
++                                   (void *) zr);
++              if (result < 0) {
++                      if (result == -EINVAL) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - bad irq number or handler\n",
++                                      ZR_DEVNAME(zr));
++                      } else if (result == -EBUSY) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
++                                      ZR_DEVNAME(zr), zr->pci_dev->irq);
++                      } else {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - can't assign irq, error code %d\n",
++                                      ZR_DEVNAME(zr), result);
++                      }
++                      goto zr_unmap;
+               }
+-      }
+-      /* even though we make this a non pointer and thus
+-       * theoretically allow for making changes to this struct
+-       * on a per-individual card basis at runtime, this is
+-       * strongly discouraged. This structure is intended to
+-       * keep general card information, no settings or anything */
+-      zr->card = zoran_cards[card_num];
+-      snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
+-               "%s[%u]", zr->card.name, zr->id);
++              /* set PCI latency timer */
++              pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
++                                   &latency);
++              need_latency = zr->revision > 1 ? 32 : 48;
++              if (latency != need_latency) {
++                      dprintk(2,
++                              KERN_INFO
++                              "%s: Changing PCI latency from %d to %d.\n",
++                              ZR_DEVNAME(zr), latency, need_latency);
++                      pci_write_config_byte(zr->pci_dev,
++                                            PCI_LATENCY_TIMER,
++                                            need_latency);
++              }
+-      zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0);
+-      if (!zr->zr36057_mem) {
+-              dprintk(1,
+-                      KERN_ERR
+-                      "%s: %s() - ioremap failed\n",
+-                      ZR_DEVNAME(zr), __func__);
+-              goto zr_free_mem;
+-      }
++              zr36057_restart(zr);
++              /* i2c */
++              dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
++                      ZR_DEVNAME(zr));
+-      result = request_irq(zr->pci_dev->irq, zoran_irq,
+-                           IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr);
+-      if (result < 0) {
+-              if (result == -EINVAL) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - bad irq number or handler\n",
+-                              ZR_DEVNAME(zr));
+-              } else if (result == -EBUSY) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
+-                              ZR_DEVNAME(zr), zr->pci_dev->irq);
++              /* i2c decoder */
++              if (decoder[zr->id] != -1) {
++                      i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
++                      zr->card.i2c_decoder = decoder[zr->id];
++              } else if (zr->card.i2c_decoder != 0) {
++                      i2c_dec_name =
++                              i2cid_to_modulename(zr->card.i2c_decoder);
+               } else {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - can't assign irq, error code %d\n",
+-                              ZR_DEVNAME(zr), result);
++                      i2c_dec_name = NULL;
+               }
+-              goto zr_unmap;
+-      }
+-      /* set PCI latency timer */
+-      pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+-                           &latency);
+-      need_latency = zr->revision > 1 ? 32 : 48;
+-      if (latency != need_latency) {
+-              dprintk(2,
+-                      KERN_INFO
+-                      "%s: Changing PCI latency from %d to %d\n",
+-                      ZR_DEVNAME(zr), latency, need_latency);
+-              pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+-                                    need_latency);
+-      }
+-
+-      zr36057_restart(zr);
+-      /* i2c */
+-      dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
+-              ZR_DEVNAME(zr));
+-
+-      /* i2c decoder */
+-      if (decoder[zr->id] != -1) {
+-              i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
+-              zr->card.i2c_decoder = decoder[zr->id];
+-      } else if (zr->card.i2c_decoder != 0) {
+-              i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder);
+-      } else {
+-              i2c_dec_name = NULL;
+-      }
++              if (i2c_dec_name) {
++                      if ((result = request_module(i2c_dec_name)) < 0) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: failed to load module %s: %d\n",
++                                      ZR_DEVNAME(zr), i2c_dec_name, result);
++                      }
++              }
+-      if (i2c_dec_name) {
+-              result = request_module(i2c_dec_name);
+-              if (result < 0) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: failed to load module %s: %d\n",
+-                              ZR_DEVNAME(zr), i2c_dec_name, result);
++              /* i2c encoder */
++              if (encoder[zr->id] != -1) {
++                      i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
++                      zr->card.i2c_encoder = encoder[zr->id];
++              } else if (zr->card.i2c_encoder != 0) {
++                      i2c_enc_name =
++                              i2cid_to_modulename(zr->card.i2c_encoder);
++              } else {
++                      i2c_enc_name = NULL;
+               }
+-      }
+-      /* i2c encoder */
+-      if (encoder[zr->id] != -1) {
+-              i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
+-              zr->card.i2c_encoder = encoder[zr->id];
+-      } else if (zr->card.i2c_encoder != 0) {
+-              i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder);
+-      } else {
+-              i2c_enc_name = NULL;
+-      }
++              if (i2c_enc_name) {
++                      if ((result = request_module(i2c_enc_name)) < 0) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: failed to load module %s: %d\n",
++                                      ZR_DEVNAME(zr), i2c_enc_name, result);
++                      }
++              }
+-      if (i2c_enc_name) {
+-              result = request_module(i2c_enc_name);
+-              if (result < 0) {
++              if (zoran_register_i2c(zr) < 0) {
+                       dprintk(1,
+                               KERN_ERR
+-                              "%s: failed to load module %s: %d\n",
+-                              ZR_DEVNAME(zr), i2c_enc_name, result);
++                              "%s: find_zr36057() - can't initialize i2c bus\n",
++                              ZR_DEVNAME(zr));
++                      goto zr_free_irq;
+               }
+-      }
+-      if (zoran_register_i2c(zr) < 0) {
+-              dprintk(1,
+-                      KERN_ERR
+-                      "%s: find_zr36057() - can't initialize i2c bus\n",
++              dprintk(2,
++                      KERN_INFO "%s: Initializing videocodec bus...\n",
+                       ZR_DEVNAME(zr));
+-              goto zr_free_irq;
+-      }
+-
+-      dprintk(2,
+-              KERN_INFO "%s: Initializing videocodec bus...\n",
+-              ZR_DEVNAME(zr));
+-      if (zr->card.video_codec) {
+-              codec_name = codecid_to_modulename(zr->card.video_codec);
+-              if (codec_name) {
+-                      result = request_module(codec_name);
+-                      if (result) {
++              if (zr->card.video_codec != 0 &&
++                  (codec_name =
++                   codecid_to_modulename(zr->card.video_codec)) != NULL) {
++                      if ((result = request_module(codec_name)) < 0) {
+                               dprintk(1,
+                                       KERN_ERR
+                                       "%s: failed to load modules %s: %d\n",
+                                       ZR_DEVNAME(zr), codec_name, result);
+                       }
+               }
+-      }
+-      if (zr->card.video_vfe) {
+-              vfe_name = codecid_to_modulename(zr->card.video_vfe);
+-              if (vfe_name) {
+-                      result = request_module(vfe_name);
+-                      if (result < 0) {
++              if (zr->card.video_vfe != 0 &&
++                  (vfe_name =
++                   codecid_to_modulename(zr->card.video_vfe)) != NULL) {
++                      if ((result = request_module(vfe_name)) < 0) {
+                               dprintk(1,
+                                       KERN_ERR
+                                       "%s: failed to load modules %s: %d\n",
+                                       ZR_DEVNAME(zr), vfe_name, result);
+                       }
+               }
+-      }
+-      /* reset JPEG codec */
+-      jpeg_codec_sleep(zr, 1);
+-      jpeg_codec_reset(zr);
+-      /* video bus enabled */
+-      /* display codec revision */
+-      if (zr->card.video_codec != 0) {
+-              master_codec = zoran_setup_videocodec(zr, zr->card.video_codec);
+-              if (!master_codec)
+-                      goto zr_unreg_i2c;
+-              zr->codec = videocodec_attach(master_codec);
+-              if (!zr->codec) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - no codec found\n",
+-                              ZR_DEVNAME(zr));
+-                      goto zr_free_codec;
+-              }
+-              if (zr->codec->type != zr->card.video_codec) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - wrong codec\n",
+-                              ZR_DEVNAME(zr));
+-                      goto zr_detach_codec;
+-              }
+-      }
+-      if (zr->card.video_vfe != 0) {
+-              master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe);
+-              if (!master_vfe)
+-                      goto zr_detach_codec;
+-              zr->vfe = videocodec_attach(master_vfe);
+-              if (!zr->vfe) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() - no VFE found\n",
+-                              ZR_DEVNAME(zr));
+-                      goto zr_free_vfe;
++              /* reset JPEG codec */
++              jpeg_codec_sleep(zr, 1);
++              jpeg_codec_reset(zr);
++              /* video bus enabled */
++              /* display codec revision */
++              if (zr->card.video_codec != 0) {
++                      master_codec = zoran_setup_videocodec(zr,
++                                                            zr->card.video_codec);
++                      if (!master_codec)
++                              goto zr_unreg_i2c;
++                      zr->codec = videocodec_attach(master_codec);
++                      if (!zr->codec) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - no codec found\n",
++                                      ZR_DEVNAME(zr));
++                              goto zr_free_codec;
++                      }
++                      if (zr->codec->type != zr->card.video_codec) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - wrong codec\n",
++                                      ZR_DEVNAME(zr));
++                              goto zr_detach_codec;
++                      }
+               }
+-              if (zr->vfe->type != zr->card.video_vfe) {
+-                      dprintk(1,
+-                              KERN_ERR
+-                              "%s: find_zr36057() = wrong VFE\n",
+-                              ZR_DEVNAME(zr));
+-                      goto zr_detach_vfe;
++              if (zr->card.video_vfe != 0) {
++                      master_vfe = zoran_setup_videocodec(zr,
++                                                          zr->card.video_vfe);
++                      if (!master_vfe)
++                              goto zr_detach_codec;
++                      zr->vfe = videocodec_attach(master_vfe);
++                      if (!zr->vfe) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() - no VFE found\n",
++                                      ZR_DEVNAME(zr));
++                              goto zr_free_vfe;
++                      }
++                      if (zr->vfe->type != zr->card.video_vfe) {
++                              dprintk(1,
++                                      KERN_ERR
++                                      "%s: find_zr36057() = wrong VFE\n",
++                                      ZR_DEVNAME(zr));
++                              goto zr_detach_vfe;
++                      }
+               }
+-      }
+-
+-      /* take care of Natoma chipset and a revision 1 zr36057 */
+-      if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
+-              zr->jpg_buffers.need_contiguous = 1;
+-              dprintk(1,
+-                      KERN_INFO
+-                      "%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
+-                      ZR_DEVNAME(zr));
+-      }
++              /* Success so keep the pci_dev referenced */
++              pci_dev_get(zr->pci_dev);
++              zoran[zoran_num++] = zr;
++              continue;
+-      if (zr36057_init(zr) < 0)
+-              goto zr_detach_vfe;
+-
+-      zoran_proc_init(zr);
+-
+-      pci_set_drvdata(pdev, zr);
+-
+-      return 0;
+-
+-zr_detach_vfe:
+-      videocodec_detach(zr->vfe);
+-zr_free_vfe:
+-      kfree(master_vfe);
+-zr_detach_codec:
+-      videocodec_detach(zr->codec);
+-zr_free_codec:
+-      kfree(master_codec);
+-zr_unreg_i2c:
+-      zoran_unregister_i2c(zr);
+-zr_free_irq:
+-      btwrite(0, ZR36057_SPGPPCR);
+-      free_irq(zr->pci_dev->irq, zr);
+-zr_unmap:
+-      iounmap(zr->zr36057_mem);
+-zr_free_mem:
+-      kfree(zr);
++              // Init errors
++            zr_detach_vfe:
++              videocodec_detach(zr->vfe);
++            zr_free_vfe:
++              kfree(master_vfe);
++            zr_detach_codec:
++              videocodec_detach(zr->codec);
++            zr_free_codec:
++              kfree(master_codec);
++            zr_unreg_i2c:
++              zoran_unregister_i2c(zr);
++            zr_free_irq:
++              btwrite(0, ZR36057_SPGPPCR);
++              free_irq(zr->pci_dev->irq, zr);
++            zr_unmap:
++              iounmap(zr->zr36057_mem);
++            zr_free_mem:
++              kfree(zr);
++              continue;
++      }
++      if (dev)        /* Clean up ref count on early exit */
++              pci_dev_put(dev);
+-      return -ENODEV;
++      if (zoran_num == 0) {
++              dprintk(1, KERN_INFO "No known MJPEG cards found.\n");
++      }
++      return zoran_num;
+ }
+-static struct pci_driver zoran_driver = {
+-      .name = "zr36067",
+-      .id_table = zr36067_pci_tbl,
+-      .probe = zoran_probe,
+-      .remove = zoran_remove,
+-};
+-
+-static int __init zoran_init(void)
++static int __init
++init_dc10_cards (void)
+ {
+-      int res;
++      int i;
++      memset(zoran, 0, sizeof(zoran));
+       printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n",
+              MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION);
++      /* Look for cards */
++      if (find_zr36057() < 0) {
++              return -EIO;
++      }
++      if (zoran_num == 0)
++              return -ENODEV;
++      dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME,
++              zoran_num);
+       /* check the parameters we have been given, adjust if necessary */
+       if (v4l_nbufs < 2)
+               v4l_nbufs = 2;
+@@ -1624,22 +1629,37 @@
+                       ZORAN_NAME);
+       }
+-      res = pci_register_driver(&zoran_driver);
+-      if (res) {
+-              dprintk(1,
+-                      KERN_ERR
+-                      "%s: Unable to register ZR36057 driver\n",
+-                      ZORAN_NAME);
+-              return res;
++      /* take care of Natoma chipset and a revision 1 zr36057 */
++      for (i = 0; i < zoran_num; i++) {
++              struct zoran *zr = zoran[i];
++
++              if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
++                      zr->jpg_buffers.need_contiguous = 1;
++                      dprintk(1,
++                              KERN_INFO
++                              "%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
++                              ZR_DEVNAME(zr));
++              }
++
++              if (zr36057_init(zr) < 0) {
++                      for (i = 0; i < zoran_num; i++)
++                              zoran_release(zoran[i]);
++                      return -EIO;
++              }
++              zoran_proc_init(zr);
+       }
+       return 0;
+ }
+-static void __exit zoran_exit(void)
++static void __exit
++unload_dc10_cards (void)
+ {
+-      pci_unregister_driver(&zoran_driver);
++      int i;
++
++      for (i = 0; i < zoran_num; i++)
++              zoran_release(zoran[i]);
+ }
+-module_init(zoran_init);
+-module_exit(zoran_exit);
++module_init(init_dc10_cards);
++module_exit(unload_dc10_cards);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/zoran/zoran_card.h linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_card.h
+--- linux-2.6.29.owrt/drivers/media/video/zoran/zoran_card.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_card.h       2009-05-10 23:48:28.000000000 +0200
+@@ -40,6 +40,8 @@
+ /* Anybody who uses more than four? */
+ #define BUZ_MAX 4
++extern int zoran_num;
++extern struct zoran *zoran[BUZ_MAX];
+ extern struct video_device zoran_template;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/zoran/zoran_driver.c linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_driver.c
+--- linux-2.6.29.owrt/drivers/media/video/zoran/zoran_driver.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran_driver.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1196,54 +1196,83 @@
+  *   Open a zoran card. Right now the flags stuff is just playing
+  */
+-static int zoran_open(struct file *file)
++static int
++zoran_open(struct file  *file)
+ {
+-      struct zoran *zr = video_drvdata(file);
++      unsigned int minor = video_devdata(file)->minor;
++      struct zoran *zr = NULL;
+       struct zoran_fh *fh;
+-      int res, first_open = 0;
+-
+-      dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
+-              ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1);
++      int i, res, first_open = 0, have_module_locks = 0;
+       lock_kernel();
++      /* find the device */
++      for (i = 0; i < zoran_num; i++) {
++              if (zoran[i]->video_dev->minor == minor) {
++                      zr = zoran[i];
++                      break;
++              }
++      }
++
++      if (!zr) {
++              dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME);
++              res = -ENODEV;
++              goto open_unlock_and_return;
++      }
+       /* see fs/device.c - the kernel already locks during open(),
+        * so locking ourselves only causes deadlocks */
+       /*mutex_lock(&zr->resource_lock);*/
+-      if (zr->user >= 2048) {
+-              dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
+-                      ZR_DEVNAME(zr), zr->user);
+-              res = -EBUSY;
+-              goto fail_unlock;
+-      }
+-
+       if (!zr->decoder) {
+               dprintk(1,
+                       KERN_ERR "%s: no TV decoder loaded for device!\n",
+                       ZR_DEVNAME(zr));
+               res = -EIO;
+-              goto fail_unlock;
++              goto open_unlock_and_return;
+       }
++      /* try to grab a module lock */
++      if (!try_module_get(THIS_MODULE)) {
++              dprintk(1,
++                      KERN_ERR
++                      "%s: failed to acquire my own lock! PANIC!\n",
++                      ZR_DEVNAME(zr));
++              res = -ENODEV;
++              goto open_unlock_and_return;
++      }
+       if (!try_module_get(zr->decoder->driver->driver.owner)) {
+               dprintk(1,
+                       KERN_ERR
+-                      "%s: failed to grab ownership of video decoder\n",
++                      "%s: failed to grab ownership of i2c decoder\n",
+                       ZR_DEVNAME(zr));
+               res = -EIO;
+-              goto fail_unlock;
++              module_put(THIS_MODULE);
++              goto open_unlock_and_return;
+       }
+       if (zr->encoder &&
+           !try_module_get(zr->encoder->driver->driver.owner)) {
+               dprintk(1,
+                       KERN_ERR
+-                      "%s: failed to grab ownership of video encoder\n",
++                      "%s: failed to grab ownership of i2c encoder\n",
+                       ZR_DEVNAME(zr));
+               res = -EIO;
+-              goto fail_decoder;
++              module_put(zr->decoder->driver->driver.owner);
++              module_put(THIS_MODULE);
++              goto open_unlock_and_return;
++      }
++
++      have_module_locks = 1;
++
++      if (zr->user >= 2048) {
++              dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
++                      ZR_DEVNAME(zr), zr->user);
++              res = -EBUSY;
++              goto open_unlock_and_return;
+       }
++      dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
++              ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
++
+       /* now, create the open()-specific file_ops struct */
+       fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL);
+       if (!fh) {
+@@ -1252,7 +1281,7 @@
+                       "%s: zoran_open() - allocation of zoran_fh failed\n",
+                       ZR_DEVNAME(zr));
+               res = -ENOMEM;
+-              goto fail_encoder;
++              goto open_unlock_and_return;
+       }
+       /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows
+        * on norm-change! */
+@@ -1263,8 +1292,9 @@
+                       KERN_ERR
+                       "%s: zoran_open() - allocation of overlay_mask failed\n",
+                       ZR_DEVNAME(zr));
++              kfree(fh);
+               res = -ENOMEM;
+-              goto fail_fh;
++              goto open_unlock_and_return;
+       }
+       if (zr->user++ == 0)
+@@ -1289,18 +1319,21 @@
+       return 0;
+-fail_fh:
+-      kfree(fh);
+-fail_encoder:
+-      if (zr->encoder)
+-              module_put(zr->encoder->driver->driver.owner);
+-fail_decoder:
+-      module_put(zr->decoder->driver->driver.owner);
+-fail_unlock:
+-      unlock_kernel();
++open_unlock_and_return:
++      /* if we grabbed locks, release them accordingly */
++      if (have_module_locks) {
++              module_put(zr->decoder->driver->driver.owner);
++              if (zr->encoder) {
++                      module_put(zr->encoder->driver->driver.owner);
++              }
++              module_put(THIS_MODULE);
++      }
+-      dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
+-              ZR_DEVNAME(zr), res, zr->user);
++      /* if there's no device found, we didn't obtain the lock either */
++      if (zr) {
++              /*mutex_unlock(&zr->resource_lock);*/
++      }
++      unlock_kernel();
+       return res;
+ }
+@@ -1311,8 +1344,8 @@
+       struct zoran_fh *fh = file->private_data;
+       struct zoran *zr = fh->zr;
+-      dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
+-              ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1);
++      dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
++              ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
+       /* kernel locks (fs/device.c), so don't do that ourselves
+        * (prevents deadlocks) */
+@@ -1358,8 +1391,10 @@
+       /* release locks on the i2c modules */
+       module_put(zr->decoder->driver->driver.owner);
+-      if (zr->encoder)
+-              module_put(zr->encoder->driver->driver.owner);
++      if (zr->encoder) {
++               module_put(zr->encoder->driver->driver.owner);
++      }
++      module_put(THIS_MODULE);
+       /*mutex_unlock(&zr->resource_lock);*/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/media/video/zoran/zoran.h linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran.h
+--- linux-2.6.29.owrt/drivers/media/video/zoran/zoran.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/media/video/zoran/zoran.h    2009-05-10 23:48:28.000000000 +0200
+@@ -349,6 +349,7 @@
+       u16 i2c_decoder, i2c_encoder;                   /* I2C types */
+       u16 video_vfe, video_codec;                     /* videocodec types */
+       u16 audio_chip;                                 /* audio type */
++      u16 vendor_id, device_id;       /* subsystem vendor/device ID */
+       int inputs;             /* number of video inputs */
+       struct input {
+@@ -400,6 +401,7 @@
+       char name[32];          /* name of this device */
+       struct pci_dev *pci_dev;        /* PCI device */
+       unsigned char revision; /* revision of zr36057 */
++      unsigned int zr36057_adr;       /* bus address of IO mem returned by PCI BIOS */
+       unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */
+       spinlock_t spinlock;    /* Spinlock */
+@@ -488,10 +490,16 @@
+       wait_queue_head_t test_q;
+ };
+-/* There was something called _ALPHA_BUZ that used the PCI address instead of
+- * the kernel iomapped address for btread/btwrite.  */
++/*The following should be done in more portable way. It depends on define
++  of _ALPHA_BUZ in the Makefile.*/
++
++#ifdef _ALPHA_BUZ
++#define btwrite(dat,adr)    writel((dat), zr->zr36057_adr+(adr))
++#define btread(adr)         readl(zr->zr36057_adr+(adr))
++#else
+ #define btwrite(dat,adr)    writel((dat), zr->zr36057_mem+(adr))
+ #define btread(adr)         readl(zr->zr36057_mem+(adr))
++#endif
+ #define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
+ #define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/message/fusion/mptbase.c linux-2.6.29-rc3.owrt/drivers/message/fusion/mptbase.c
+--- linux-2.6.29.owrt/drivers/message/fusion/mptbase.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/message/fusion/mptbase.c     2009-05-10 23:48:28.000000000 +0200
+@@ -91,9 +91,9 @@
+               controllers (default=0)");
+ static int mpt_msi_enable_sas;
+-module_param(mpt_msi_enable_sas, int, 0);
++module_param(mpt_msi_enable_sas, int, 1);
+ MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
+-              controllers (default=0)");
++              controllers (default=1)");
+ static int mpt_channel_mapping;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/htc-egpio.c linux-2.6.29-rc3.owrt/drivers/mfd/htc-egpio.c
+--- linux-2.6.29.owrt/drivers/mfd/htc-egpio.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/htc-egpio.c      2009-05-10 23:48:28.000000000 +0200
+@@ -286,7 +286,7 @@
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res)
+               goto fail;
+-      ei->base_addr = ioremap_nocache(res->start, resource_size(res));
++      ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
+       if (!ei->base_addr)
+               goto fail;
+       pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
+@@ -307,7 +307,7 @@
+       ei->nchips = pdata->num_chips;
+       ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
+-      if (!ei->chip) {
++      if (!ei) {
+               ret = -ENOMEM;
+               goto fail;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/pcf50633-core.c linux-2.6.29-rc3.owrt/drivers/mfd/pcf50633-core.c
+--- linux-2.6.29.owrt/drivers/mfd/pcf50633-core.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/pcf50633-core.c  2009-05-10 23:48:28.000000000 +0200
+@@ -626,6 +626,7 @@
+       }
+       if (client->irq) {
++              set_irq_handler(client->irq, handle_level_irq);
+               ret = request_irq(client->irq, pcf50633_irq,
+                               IRQF_TRIGGER_LOW, "pcf50633", pcf);
+@@ -678,7 +679,6 @@
+ static struct i2c_device_id pcf50633_id_table[] = {
+       {"pcf50633", 0x73},
+-      {/* end of list */}
+ };
+ static struct i2c_driver pcf50633_driver = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/sm501.c linux-2.6.29-rc3.owrt/drivers/mfd/sm501.c
+--- linux-2.6.29.owrt/drivers/mfd/sm501.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/sm501.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1050,7 +1050,7 @@
+       return gpiochip_add(gchip);
+ }
+-static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
++static int sm501_register_gpio(struct sm501_devdata *sm)
+ {
+       struct sm501_gpio *gpio = &sm->gpio;
+       resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+@@ -1321,7 +1321,7 @@
+  * Common init code for an SM501
+ */
+-static int __devinit sm501_init_dev(struct sm501_devdata *sm)
++static int sm501_init_dev(struct sm501_devdata *sm)
+ {
+       struct sm501_initdata *idata;
+       struct sm501_platdata *pdata;
+@@ -1397,7 +1397,7 @@
+       return 0;
+ }
+-static int __devinit sm501_plat_probe(struct platform_device *dev)
++static int sm501_plat_probe(struct platform_device *dev)
+ {
+       struct sm501_devdata *sm;
+       int ret;
+@@ -1586,8 +1586,8 @@
+       .gpio_base      = -1,
+ };
+-static int __devinit sm501_pci_probe(struct pci_dev *dev,
+-                                   const struct pci_device_id *id)
++static int sm501_pci_probe(struct pci_dev *dev,
++                         const struct pci_device_id *id)
+ {
+       struct sm501_devdata *sm;
+       int err;
+@@ -1693,7 +1693,7 @@
+       sm501_gpio_remove(sm);
+ }
+-static void __devexit sm501_pci_remove(struct pci_dev *dev)
++static void sm501_pci_remove(struct pci_dev *dev)
+ {
+       struct sm501_devdata *sm = pci_get_drvdata(dev);
+@@ -1727,16 +1727,16 @@
+ MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
+-static struct pci_driver sm501_pci_driver = {
++static struct pci_driver sm501_pci_drv = {
+       .name           = "sm501",
+       .id_table       = sm501_pci_tbl,
+       .probe          = sm501_pci_probe,
+-      .remove         = __devexit_p(sm501_pci_remove),
++      .remove         = sm501_pci_remove,
+ };
+ MODULE_ALIAS("platform:sm501");
+-static struct platform_driver sm501_plat_driver = {
++static struct platform_driver sm501_plat_drv = {
+       .driver         = {
+               .name   = "sm501",
+               .owner  = THIS_MODULE,
+@@ -1749,14 +1749,14 @@
+ static int __init sm501_base_init(void)
+ {
+-      platform_driver_register(&sm501_plat_driver);
+-      return pci_register_driver(&sm501_pci_driver);
++      platform_driver_register(&sm501_plat_drv);
++      return pci_register_driver(&sm501_pci_drv);
+ }
+ static void __exit sm501_base_exit(void)
+ {
+-      platform_driver_unregister(&sm501_plat_driver);
+-      pci_unregister_driver(&sm501_pci_driver);
++      platform_driver_unregister(&sm501_plat_drv);
++      pci_unregister_driver(&sm501_pci_drv);
+ }
+ module_init(sm501_base_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/twl4030-core.c linux-2.6.29-rc3.owrt/drivers/mfd/twl4030-core.c
+--- linux-2.6.29.owrt/drivers/mfd/twl4030-core.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/twl4030-core.c   2009-05-10 23:48:28.000000000 +0200
+@@ -38,7 +38,7 @@
+ #include <linux/i2c.h>
+ #include <linux/i2c/twl4030.h>
+-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
++#ifdef CONFIG_ARM
+ #include <mach/cpu.h>
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/wm8350-core.c linux-2.6.29-rc3.owrt/drivers/mfd/wm8350-core.c
+--- linux-2.6.29.owrt/drivers/mfd/wm8350-core.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/wm8350-core.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1111,7 +1111,7 @@
+       do {
+               schedule_timeout_interruptible(1);
+               reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+-      } while (--tries && (reg & WM8350_AUXADC_POLL));
++      } while (tries-- && (reg & WM8350_AUXADC_POLL));
+       if (!tries)
+               dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
+@@ -1297,29 +1297,14 @@
+ int wm8350_device_init(struct wm8350 *wm8350, int irq,
+                      struct wm8350_platform_data *pdata)
+ {
+-      int ret;
++      int ret = -EINVAL;
+       u16 id1, id2, mask_rev;
+       u16 cust_id, mode, chip_rev;
+       /* get WM8350 revision and config mode */
+-      ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+-      if (ret != 0) {
+-              dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+-              goto err;
+-      }
+-
+-      ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+-      if (ret != 0) {
+-              dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+-              goto err;
+-      }
+-
+-      ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
+-                             &mask_rev);
+-      if (ret != 0) {
+-              dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+-              goto err;
+-      }
++      wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
++      wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
++      wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
+       id1 = be16_to_cpu(id1);
+       id2 = be16_to_cpu(id2);
+@@ -1383,11 +1368,6 @@
+                       wm8350->power.rev_g_coeff = 1;
+                       break;
+-              case 1:
+-                      dev_info(wm8350->dev, "WM8351 Rev B\n");
+-                      wm8350->power.rev_g_coeff = 1;
+-                      break;
+-
+               default:
+                       dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
+                       ret = -ENODEV;
+@@ -1424,12 +1404,14 @@
+               return ret;
+       }
+-      wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+-      wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+-      wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+-      wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+-      wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+-      wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
++      if (pdata && pdata->init) {
++              ret = pdata->init(wm8350);
++              if (ret != 0) {
++                      dev_err(wm8350->dev, "Platform init() failed: %d\n",
++                              ret);
++                      goto err;
++              }
++      }
+       mutex_init(&wm8350->auxadc_mutex);
+       mutex_init(&wm8350->irq_mutex);
+@@ -1448,15 +1430,6 @@
+       }
+       wm8350->chip_irq = irq;
+-      if (pdata && pdata->init) {
+-              ret = pdata->init(wm8350);
+-              if (ret != 0) {
+-                      dev_err(wm8350->dev, "Platform init() failed: %d\n",
+-                              ret);
+-                      goto err;
+-              }
+-      }
+-
+       wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
+       wm8350_client_dev_register(wm8350, "wm8350-codec",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mfd/wm8350-regmap.c linux-2.6.29-rc3.owrt/drivers/mfd/wm8350-regmap.c
+--- linux-2.6.29.owrt/drivers/mfd/wm8350-regmap.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mfd/wm8350-regmap.c  2009-05-10 23:48:28.000000000 +0200
+@@ -3188,7 +3188,7 @@
+       { 0x7CFF, 0x0C00, 0x7FFF }, /* R1   - ID */
+       { 0x0000, 0x0000, 0x0000 }, /* R2 */
+       { 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
+-      { 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
++      { 0xFCF7, 0xFCF7, 0xF800 }, /* R4   - System Control 2 */
+       { 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
+       { 0xFB0E, 0xFB0E, 0x0000 }, /* R6   - Interface Control */
+       { 0x0000, 0x0000, 0x0000 }, /* R7 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/atmel-ssc.c linux-2.6.29-rc3.owrt/drivers/misc/atmel-ssc.c
+--- linux-2.6.29.owrt/drivers/misc/atmel-ssc.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/atmel-ssc.c     2009-05-10 23:48:28.000000000 +0200
+@@ -35,7 +35,7 @@
+       if (!ssc_valid) {
+               spin_unlock(&user_lock);
+-              pr_err("ssc: ssc%d platform device is missing\n", ssc_num);
++              dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
+               return ERR_PTR(-ENODEV);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/hpilo.c linux-2.6.29-rc3.owrt/drivers/misc/hpilo.c
+--- linux-2.6.29.owrt/drivers/misc/hpilo.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/hpilo.c 2009-05-10 23:48:28.000000000 +0200
+@@ -207,7 +207,7 @@
+                 &device_ccb->recv_ctrl);
+       /* give iLO some time to process stop request */
+-      for (retries = MAX_WAIT; retries > 0; retries--) {
++      for (retries = 1000; retries > 0; retries--) {
+               doorbell_set(driver_ccb);
+               udelay(1);
+               if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
+@@ -309,7 +309,7 @@
+       doorbell_clr(driver_ccb);
+       /* make sure iLO is really handling requests */
+-      for (i = MAX_WAIT; i > 0; i--) {
++      for (i = 1000; i > 0; i--) {
+               if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
+                       break;
+               udelay(1);
+@@ -326,7 +326,7 @@
+       return 0;
+ free:
+-      ilo_ccb_close(pdev, data);
++      pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ out:
+       return error;
+ }
+@@ -710,7 +710,6 @@
+ static struct pci_device_id ilo_devices[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+-      { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
+       { }
+ };
+ MODULE_DEVICE_TABLE(pci, ilo_devices);
+@@ -759,7 +758,7 @@
+       class_destroy(ilo_class);
+ }
+-MODULE_VERSION("1.0");
++MODULE_VERSION("0.05");
+ MODULE_ALIAS(ILO_NAME);
+ MODULE_DESCRIPTION(ILO_NAME);
+ MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/hpilo.h linux-2.6.29-rc3.owrt/drivers/misc/hpilo.h
+--- linux-2.6.29.owrt/drivers/misc/hpilo.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/hpilo.h 2009-05-10 23:48:28.000000000 +0200
+@@ -19,8 +19,6 @@
+ #define MAX_ILO_DEV   1
+ /* max number of files */
+ #define MAX_OPEN      (MAX_CCB * MAX_ILO_DEV)
+-/* spin counter for open/close delay */
+-#define MAX_WAIT      10000
+ /*
+  * Per device, used to track global memory allocations.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/Kconfig linux-2.6.29-rc3.owrt/drivers/misc/Kconfig
+--- linux-2.6.29.owrt/drivers/misc/Kconfig     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/Kconfig 2009-05-10 23:48:28.000000000 +0200
+@@ -217,7 +217,6 @@
+       depends on EXPERIMENTAL
+       depends on BACKLIGHT_CLASS_DEVICE
+       depends on RFKILL
+-      depends on POWER_SUPPLY
+       default n
+       ---help---
+       This driver adds support for rfkill and backlight control to Dell
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_channel.c linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_channel.c
+--- linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_channel.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_channel.c    2009-05-10 23:48:28.000000000 +0200
+@@ -49,6 +49,9 @@
+               if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+                       return;
++
++              DBUG_ON(ch->local_msgqueue == NULL);
++              DBUG_ON(ch->remote_msgqueue == NULL);
+       }
+       if (!(ch->flags & XPC_C_OPENREPLY)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc.h linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc.h
+--- linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc.h    2009-05-10 23:48:28.000000000 +0200
+@@ -3,7 +3,7 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
+- * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
++ * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved.
+  */
+ /*
+@@ -514,8 +514,7 @@
+                                               /* partition's notify mq */
+       struct xpc_send_msg_slot_uv *send_msg_slots;
+-      void *recv_msg_slots;   /* each slot will hold a xpc_notify_mq_msg_uv */
+-                              /* structure plus the user's payload */
++      struct xpc_notify_mq_msg_uv *recv_msg_slots;
+       struct xpc_fifo_head_uv msg_slot_free_list;
+       struct xpc_fifo_head_uv recv_msg_list;  /* deliverable payloads */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_sn2.c linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_sn2.c
+--- linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_sn2.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_sn2.c        2009-05-10 23:48:28.000000000 +0200
+@@ -1106,6 +1106,8 @@
+       int n_IRQs_expected;
+       int n_IRQs_detected;
++      DBUG_ON(xpc_activate_IRQ_rcvd == 0);
++
+       spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+       n_IRQs_expected = xpc_activate_IRQ_rcvd;
+       xpc_activate_IRQ_rcvd = 0;
+@@ -1724,7 +1726,6 @@
+               msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+                                            (get % ch->local_nentries) *
+                                            ch->entry_size);
+-              DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+               msg->flags = 0;
+       } while (++get < ch_sn2->remote_GP.get);
+ }
+@@ -1739,18 +1740,11 @@
+       struct xpc_msg_sn2 *msg;
+       s64 put;
+-      /* flags are zeroed when the buffer is allocated */
+-      if (ch_sn2->remote_GP.put < ch->remote_nentries)
+-              return;
+-
+-      put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries);
++      put = ch_sn2->w_remote_GP.put;
+       do {
+               msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+                                            (put % ch->remote_nentries) *
+                                            ch->entry_size);
+-              DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+-              DBUG_ON(!(msg->flags & XPC_M_SN2_DONE));
+-              DBUG_ON(msg->number != put - ch->remote_nentries);
+               msg->flags = 0;
+       } while (++put < ch_sn2->remote_GP.put);
+ }
+@@ -1842,7 +1836,6 @@
+                */
+               xpc_clear_remote_msgqueue_flags_sn2(ch);
+-              smp_wmb(); /* ensure flags have been cleared before bte_copy */
+               ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+               dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+@@ -1941,7 +1934,7 @@
+                       break;
+               get = ch_sn2->w_local_GP.get;
+-              smp_rmb();      /* guarantee that .get loads before .put */
++              rmb();  /* guarantee that .get loads before .put */
+               if (get == ch_sn2->w_remote_GP.put)
+                       break;
+@@ -1963,13 +1956,11 @@
+                       msg = xpc_pull_remote_msg_sn2(ch, get);
+-                      if (msg != NULL) {
+-                              DBUG_ON(msg->number != get);
+-                              DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+-                              DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
++                      DBUG_ON(msg != NULL && msg->number != get);
++                      DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
++                      DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+-                              payload = &msg->payload;
+-                      }
++                      payload = &msg->payload;
+                       break;
+               }
+@@ -2062,7 +2053,7 @@
+       while (1) {
+               put = ch_sn2->w_local_GP.put;
+-              smp_rmb();      /* guarantee that .put loads before .get */
++              rmb();  /* guarantee that .put loads before .get */
+               if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+                       /* There are available message entries. We need to try
+@@ -2195,7 +2186,7 @@
+        * The preceding store of msg->flags must occur before the following
+        * load of local_GP->put.
+        */
+-      smp_mb();
++      mb();
+       /* see if the message is next in line to be sent, if so send it */
+@@ -2286,9 +2277,8 @@
+       dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+               (void *)msg, msg_number, ch->partid, ch->number);
+-      DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
++      DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+               msg_number % ch->remote_nentries);
+-      DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+       DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+       msg->flags |= XPC_M_SN2_DONE;
+@@ -2297,7 +2287,7 @@
+        * The preceding store of msg->flags must occur before the following
+        * load of local_GP->get.
+        */
+-      smp_mb();
++      mb();
+       /*
+        * See if this message is next in line to be acknowledged as having
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_uv.c linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_uv.c
+--- linux-2.6.29.owrt/drivers/misc/sgi-xp/xpc_uv.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpc_uv.c 2009-05-10 23:48:28.000000000 +0200
+@@ -3,7 +3,7 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
+- * Copyright (c) 2008-2009 Silicon Graphics, Inc.  All Rights Reserved.
++ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+  */
+ /*
+@@ -1010,8 +1010,8 @@
+                       continue;
+               for (entry = 0; entry < nentries; entry++) {
+-                      msg_slot = ch_uv->recv_msg_slots +
+-                          entry * ch->entry_size;
++                      msg_slot = ch_uv->recv_msg_slots + entry *
++                          ch->entry_size;
+                       msg_slot->hdr.msg_slot_number = entry;
+               }
+@@ -1308,8 +1308,9 @@
+       /* we're dealing with a normal message sent via the notify_mq */
+       ch_uv = &ch->sn.uv;
+-      msg_slot = ch_uv->recv_msg_slots +
+-          (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size;
++      msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
++                  (msg->hdr.msg_slot_number % ch->remote_nentries) *
++                  ch->entry_size);
+       BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+       BUG_ON(msg_slot->hdr.size != 0);
+@@ -1422,7 +1423,7 @@
+               atomic_inc(&ch->n_to_notify);
+               msg_slot->key = key;
+-              smp_wmb(); /* a non-NULL func must hit memory after the key */
++              wmb(); /* a non-NULL func must hit memory after the key */
+               msg_slot->func = func;
+               if (ch->flags & XPC_C_DISCONNECTING) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/misc/sgi-xp/xpnet.c linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpnet.c
+--- linux-2.6.29.owrt/drivers/misc/sgi-xp/xpnet.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/misc/sgi-xp/xpnet.c  2009-05-10 23:48:28.000000000 +0200
+@@ -3,7 +3,7 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
+- * Copyright (C) 1999-2009 Silicon Graphics, Inc. All rights reserved.
++ * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved.
+  */
+ /*
+@@ -551,7 +551,6 @@
+       netif_carrier_off(xpnet_device);
+-      xpnet_device->netdev_ops = &xpnet_netdev_ops;
+       xpnet_device->mtu = XPNET_DEF_MTU;
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/card/block.c linux-2.6.29-rc3.owrt/drivers/mmc/card/block.c
+--- linux-2.6.29.owrt/drivers/mmc/card/block.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/card/block.c     2009-05-10 23:48:28.000000000 +0200
+@@ -584,7 +584,7 @@
+       if (err)
+               goto out;
+-      string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
++      string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
+                       cap_str, sizeof(cap_str));
+       printk(KERN_INFO "%s: %s %s %s %s\n",
+               md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/card/mmc_test.c linux-2.6.29-rc3.owrt/drivers/mmc/card/mmc_test.c
+--- linux-2.6.29.owrt/drivers/mmc/card/mmc_test.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/card/mmc_test.c  2009-05-10 23:48:28.000000000 +0200
+@@ -494,7 +494,7 @@
+       sg_init_one(&sg, test->buffer, 512);
+-      ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
++      ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
+       if (ret)
+               return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/core/mmc_ops.c linux-2.6.29-rc3.owrt/drivers/mmc/core/mmc_ops.c
+--- linux-2.6.29.owrt/drivers/mmc/core/mmc_ops.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/core/mmc_ops.c   2009-05-10 23:48:28.000000000 +0200
+@@ -248,15 +248,12 @@
+       sg_init_one(&sg, data_buf, len);
+-      if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+-              /*
+-               * The spec states that CSR and CID accesses have a timeout
+-               * of 64 clock cycles.
+-               */
+-              data.timeout_ns = 0;
+-              data.timeout_clks = 64;
+-      } else
+-              mmc_set_data_timeout(&data, card);
++      /*
++       * The spec states that CSR and CID accesses have a timeout
++       * of 64 clock cycles.
++       */
++      data.timeout_ns = 0;
++      data.timeout_clks = 64;
+       mmc_wait_for_req(host, &mrq);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/atmel-mci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/atmel-mci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/atmel-mci.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/atmel-mci.c 2009-05-10 23:48:28.000000000 +0200
+@@ -1548,10 +1548,9 @@
+ {
+       struct dw_dma_slave *dws = slave;
+-      if (dws->dma_dev == chan->device->dev) {
+-              chan->private = dws;
++      if (dws->dma_dev == chan->device->dev)
+               return true;
+-      } else
++      else
+               return false;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/Kconfig linux-2.6.29-rc3.owrt/drivers/mmc/host/Kconfig
+--- linux-2.6.29.owrt/drivers/mmc/host/Kconfig 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/Kconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -145,16 +145,6 @@
+         If unsure, say N.
+-config MMC_MXC
+-      tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+-      depends on ARCH_MXC
+-      help
+-        This selects the Freescale i.MX2/3 Multimedia card Interface.
+-        If you have a i.MX platform with a Multimedia Card slot,
+-        say Y or M here.
+-
+-        If unsure, say N.
+-
+ config MMC_TIFM_SD
+       tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
+       depends on EXPERIMENTAL && PCI
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/Makefile linux-2.6.29-rc3.owrt/drivers/mmc/host/Makefile
+--- linux-2.6.29.owrt/drivers/mmc/host/Makefile        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/Makefile    2009-05-10 23:48:28.000000000 +0200
+@@ -9,7 +9,6 @@
+ obj-$(CONFIG_MMC_ARMMMCI)     += mmci.o
+ obj-$(CONFIG_MMC_PXA)         += pxamci.o
+ obj-$(CONFIG_MMC_IMX)         += imxmmc.o
+-obj-$(CONFIG_MMC_MXC)         += mxcmmc.o
+ obj-$(CONFIG_MMC_SDHCI)               += sdhci.o
+ obj-$(CONFIG_MMC_SDHCI_PCI)   += sdhci-pci.o
+ obj-$(CONFIG_MMC_RICOH_MMC)   += ricoh_mmc.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/mmci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/mmci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/mmci.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/mmci.c      2009-05-10 23:48:28.000000000 +0200
+@@ -430,8 +430,6 @@
+                               clk = 255;
+                       host->cclk = host->mclk / (2 * (clk + 1));
+               }
+-              if (host->hw_designer == 0x80)
+-                      clk |= MCI_FCEN; /* Bug fix in ST IP block */
+               clk |= MCI_CLK_ENABLE;
+       }
+@@ -442,27 +440,15 @@
+       case MMC_POWER_OFF:
+               break;
+       case MMC_POWER_UP:
+-              /* The ST version does not have this, fall through to POWER_ON */
+-              if (host->hw_designer != 0x80) {
+-                      pwr |= MCI_PWR_UP;
+-                      break;
+-              }
++              pwr |= MCI_PWR_UP;
++              break;
+       case MMC_POWER_ON:
+               pwr |= MCI_PWR_ON;
+               break;
+       }
+-      if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+-              if (host->hw_designer != 0x80)
+-                      pwr |= MCI_ROD;
+-              else {
+-                      /*
+-                       * The ST Micro variant use the ROD bit for something
+-                       * else and only has OD (Open Drain).
+-                       */
+-                      pwr |= MCI_OD;
+-              }
+-      }
++      if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
++              pwr |= MCI_ROD;
+       writel(clk, host->base + MMCICLOCK);
+@@ -514,12 +500,6 @@
+       }
+       host = mmc_priv(mmc);
+-      /* Bits 12 thru 19 is the designer */
+-      host->hw_designer = (dev->periphid >> 12) & 0xff;
+-      /* Bits 20 thru 23 is the revison */
+-      host->hw_revision = (dev->periphid >> 20) & 0xf;
+-      DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+-      DBG(host, "revision = 0x%01x\n", host->hw_revision);
+       host->clk = clk_get(&dev->dev, NULL);
+       if (IS_ERR(host->clk)) {
+               ret = PTR_ERR(host->clk);
+@@ -713,15 +693,6 @@
+               .id     = 0x00041181,
+               .mask   = 0x000fffff,
+       },
+-      /* ST Micro variants */
+-      {
+-              .id     = 0x00180180,
+-              .mask   = 0x00ffffff,
+-      },
+-      {
+-              .id     = 0x00280180,
+-              .mask   = 0x00ffffff,
+-      },
+       { 0, 0 },
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/mmci.h linux-2.6.29-rc3.owrt/drivers/mmc/host/mmci.h
+--- linux-2.6.29.owrt/drivers/mmc/host/mmci.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/mmci.h      2009-05-10 23:48:28.000000000 +0200
+@@ -11,23 +11,13 @@
+ #define MCI_PWR_OFF           0x00
+ #define MCI_PWR_UP            0x02
+ #define MCI_PWR_ON            0x03
+-#define MCI_DATA2DIREN                (1 << 2)
+-#define MCI_CMDDIREN          (1 << 3)
+-#define MCI_DATA0DIREN                (1 << 4)
+-#define MCI_DATA31DIREN               (1 << 5)
+ #define MCI_OD                        (1 << 6)
+ #define MCI_ROD                       (1 << 7)
+-/* The ST Micro version does not have ROD */
+-#define MCI_FBCLKEN           (1 << 7)
+-#define MCI_DATA74DIREN               (1 << 8)
+ #define MMCICLOCK             0x004
+ #define MCI_CLK_ENABLE                (1 << 8)
+ #define MCI_CLK_PWRSAVE               (1 << 9)
+ #define MCI_CLK_BYPASS                (1 << 10)
+-#define MCI_WIDE_BUS          (1 << 11)
+-/* HW flow control on the ST Micro version */
+-#define MCI_FCEN              (1 << 13)
+ #define MMCIARGUMENT          0x008
+ #define MMCICOMMAND           0x00c
+@@ -36,10 +26,6 @@
+ #define MCI_CPSM_INTERRUPT    (1 << 8)
+ #define MCI_CPSM_PENDING      (1 << 9)
+ #define MCI_CPSM_ENABLE               (1 << 10)
+-#define MCI_SDIO_SUSP         (1 << 11)
+-#define MCI_ENCMD_COMPL               (1 << 12)
+-#define MCI_NIEN              (1 << 13)
+-#define MCI_CE_ATACMD         (1 << 14)
+ #define MMCIRESPCMD           0x010
+ #define MMCIRESPONSE0         0x014
+@@ -53,11 +39,6 @@
+ #define MCI_DPSM_DIRECTION    (1 << 1)
+ #define MCI_DPSM_MODE         (1 << 2)
+ #define MCI_DPSM_DMAENABLE    (1 << 3)
+-#define MCI_DPSM_BLOCKSIZE    (1 << 4)
+-#define MCI_DPSM_RWSTART      (1 << 8)
+-#define MCI_DPSM_RWSTOP               (1 << 9)
+-#define MCI_DPSM_RWMOD                (1 << 10)
+-#define MCI_DPSM_SDIOEN               (1 << 11)
+ #define MMCIDATACNT           0x030
+ #define MMCISTATUS            0x034
+@@ -82,8 +63,6 @@
+ #define MCI_RXFIFOEMPTY               (1 << 19)
+ #define MCI_TXDATAAVLBL               (1 << 20)
+ #define MCI_RXDATAAVLBL               (1 << 21)
+-#define MCI_SDIOIT            (1 << 22)
+-#define MCI_CEATAEND          (1 << 23)
+ #define MMCICLEAR             0x038
+ #define MCI_CMDCRCFAILCLR     (1 << 0)
+@@ -96,8 +75,6 @@
+ #define MCI_CMDSENTCLR                (1 << 7)
+ #define MCI_DATAENDCLR                (1 << 8)
+ #define MCI_DATABLOCKENDCLR   (1 << 10)
+-#define MCI_SDIOITC           (1 << 22)
+-#define MCI_CEATAENDC         (1 << 23)
+ #define MMCIMASK0             0x03c
+ #define MCI_CMDCRCFAILMASK    (1 << 0)
+@@ -121,8 +98,6 @@
+ #define MCI_RXFIFOEMPTYMASK   (1 << 19)
+ #define MCI_TXDATAAVLBLMASK   (1 << 20)
+ #define MCI_RXDATAAVLBLMASK   (1 << 21)
+-#define MCI_SDIOITMASK                (1 << 22)
+-#define MCI_CEATAENDMASK      (1 << 23)
+ #define MMCIMASK1             0x040
+ #define MMCIFIFOCNT           0x048
+@@ -161,9 +136,6 @@
+       u32                     pwr;
+       struct mmc_platform_data *plat;
+-      u8                      hw_designer;
+-      u8                      hw_revision:4;
+-
+       struct timer_list       timer;
+       unsigned int            oldstat;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/mxcmmc.c linux-2.6.29-rc3.owrt/drivers/mmc/host/mxcmmc.c
+--- linux-2.6.29.owrt/drivers/mmc/host/mxcmmc.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/mxcmmc.c    1970-01-01 01:00:00.000000000 +0100
+@@ -1,880 +0,0 @@
+-/*
+- *  linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
+- *
+- *  This is a driver for the SDHC controller found in Freescale MX2/MX3
+- *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
+- *  Unlike the hardware found on MX1, this hardware just works and does
+- *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+- *
+- *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+- *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+- *
+- *  derived from pxamci.c by Russell King
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- */
+-
+-#include <linux/module.h>
+-#include <linux/init.h>
+-#include <linux/ioport.h>
+-#include <linux/platform_device.h>
+-#include <linux/interrupt.h>
+-#include <linux/irq.h>
+-#include <linux/blkdev.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/mmc/host.h>
+-#include <linux/mmc/card.h>
+-#include <linux/delay.h>
+-#include <linux/clk.h>
+-#include <linux/io.h>
+-#include <linux/gpio.h>
+-
+-#include <asm/dma.h>
+-#include <asm/irq.h>
+-#include <asm/sizes.h>
+-#include <mach/mmc.h>
+-
+-#ifdef CONFIG_ARCH_MX2
+-#include <mach/dma-mx1-mx2.h>
+-#define HAS_DMA
+-#endif
+-
+-#define DRIVER_NAME "imx-mmc"
+-
+-#define MMC_REG_STR_STP_CLK           0x00
+-#define MMC_REG_STATUS                        0x04
+-#define MMC_REG_CLK_RATE              0x08
+-#define MMC_REG_CMD_DAT_CONT          0x0C
+-#define MMC_REG_RES_TO                        0x10
+-#define MMC_REG_READ_TO                       0x14
+-#define MMC_REG_BLK_LEN                       0x18
+-#define MMC_REG_NOB                   0x1C
+-#define MMC_REG_REV_NO                        0x20
+-#define MMC_REG_INT_CNTR              0x24
+-#define MMC_REG_CMD                   0x28
+-#define MMC_REG_ARG                   0x2C
+-#define MMC_REG_RES_FIFO              0x34
+-#define MMC_REG_BUFFER_ACCESS         0x38
+-
+-#define STR_STP_CLK_RESET               (1 << 3)
+-#define STR_STP_CLK_START_CLK           (1 << 1)
+-#define STR_STP_CLK_STOP_CLK            (1 << 0)
+-
+-#define STATUS_CARD_INSERTION         (1 << 31)
+-#define STATUS_CARD_REMOVAL           (1 << 30)
+-#define STATUS_YBUF_EMPTY             (1 << 29)
+-#define STATUS_XBUF_EMPTY             (1 << 28)
+-#define STATUS_YBUF_FULL              (1 << 27)
+-#define STATUS_XBUF_FULL              (1 << 26)
+-#define STATUS_BUF_UND_RUN            (1 << 25)
+-#define STATUS_BUF_OVFL                       (1 << 24)
+-#define STATUS_SDIO_INT_ACTIVE                (1 << 14)
+-#define STATUS_END_CMD_RESP           (1 << 13)
+-#define STATUS_WRITE_OP_DONE          (1 << 12)
+-#define STATUS_DATA_TRANS_DONE                (1 << 11)
+-#define STATUS_READ_OP_DONE           (1 << 11)
+-#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10)
+-#define STATUS_CARD_BUS_CLK_RUN               (1 << 8)
+-#define STATUS_BUF_READ_RDY           (1 << 7)
+-#define STATUS_BUF_WRITE_RDY          (1 << 6)
+-#define STATUS_RESP_CRC_ERR           (1 << 5)
+-#define STATUS_CRC_READ_ERR           (1 << 3)
+-#define STATUS_CRC_WRITE_ERR          (1 << 2)
+-#define STATUS_TIME_OUT_RESP          (1 << 1)
+-#define STATUS_TIME_OUT_READ          (1 << 0)
+-#define STATUS_ERR_MASK                       0x2f
+-
+-#define CMD_DAT_CONT_CMD_RESP_LONG_OFF        (1 << 12)
+-#define CMD_DAT_CONT_STOP_READWAIT    (1 << 11)
+-#define CMD_DAT_CONT_START_READWAIT   (1 << 10)
+-#define CMD_DAT_CONT_BUS_WIDTH_4      (2 << 8)
+-#define CMD_DAT_CONT_INIT             (1 << 7)
+-#define CMD_DAT_CONT_WRITE            (1 << 4)
+-#define CMD_DAT_CONT_DATA_ENABLE      (1 << 3)
+-#define CMD_DAT_CONT_RESPONSE_48BIT_CRC       (1 << 0)
+-#define CMD_DAT_CONT_RESPONSE_136BIT  (2 << 0)
+-#define CMD_DAT_CONT_RESPONSE_48BIT   (3 << 0)
+-
+-#define INT_SDIO_INT_WKP_EN           (1 << 18)
+-#define INT_CARD_INSERTION_WKP_EN     (1 << 17)
+-#define INT_CARD_REMOVAL_WKP_EN               (1 << 16)
+-#define INT_CARD_INSERTION_EN         (1 << 15)
+-#define INT_CARD_REMOVAL_EN           (1 << 14)
+-#define INT_SDIO_IRQ_EN                       (1 << 13)
+-#define INT_DAT0_EN                   (1 << 12)
+-#define INT_BUF_READ_EN                       (1 << 4)
+-#define INT_BUF_WRITE_EN              (1 << 3)
+-#define INT_END_CMD_RES_EN            (1 << 2)
+-#define INT_WRITE_OP_DONE_EN          (1 << 1)
+-#define INT_READ_OP_EN                        (1 << 0)
+-
+-struct mxcmci_host {
+-      struct mmc_host         *mmc;
+-      struct resource         *res;
+-      void __iomem            *base;
+-      int                     irq;
+-      int                     detect_irq;
+-      int                     dma;
+-      int                     do_dma;
+-      unsigned int            power_mode;
+-      struct imxmmc_platform_data *pdata;
+-
+-      struct mmc_request      *req;
+-      struct mmc_command      *cmd;
+-      struct mmc_data         *data;
+-
+-      unsigned int            dma_nents;
+-      unsigned int            datasize;
+-      unsigned int            dma_dir;
+-
+-      u16                     rev_no;
+-      unsigned int            cmdat;
+-
+-      struct clk              *clk;
+-
+-      int                     clock;
+-
+-      struct work_struct      datawork;
+-};
+-
+-static inline int mxcmci_use_dma(struct mxcmci_host *host)
+-{
+-      return host->do_dma;
+-}
+-
+-static void mxcmci_softreset(struct mxcmci_host *host)
+-{
+-      int i;
+-
+-      /* reset sequence */
+-      writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
+-      writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
+-                      host->base + MMC_REG_STR_STP_CLK);
+-
+-      for (i = 0; i < 8; i++)
+-              writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+-
+-      writew(0xff, host->base + MMC_REG_RES_TO);
+-}
+-
+-static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+-{
+-      unsigned int nob = data->blocks;
+-      unsigned int blksz = data->blksz;
+-      unsigned int datasize = nob * blksz;
+-#ifdef HAS_DMA
+-      struct scatterlist *sg;
+-      int i;
+-#endif
+-      if (data->flags & MMC_DATA_STREAM)
+-              nob = 0xffff;
+-
+-      host->data = data;
+-      data->bytes_xfered = 0;
+-
+-      writew(nob, host->base + MMC_REG_NOB);
+-      writew(blksz, host->base + MMC_REG_BLK_LEN);
+-      host->datasize = datasize;
+-
+-#ifdef HAS_DMA
+-      for_each_sg(data->sg, sg, data->sg_len, i) {
+-              if (sg->offset & 3 || sg->length & 3) {
+-                      host->do_dma = 0;
+-                      return;
+-              }
+-      }
+-
+-      if (data->flags & MMC_DATA_READ) {
+-              host->dma_dir = DMA_FROM_DEVICE;
+-              host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+-                                           data->sg_len,  host->dma_dir);
+-
+-              imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+-                               host->res->start + MMC_REG_BUFFER_ACCESS,
+-                               DMA_MODE_READ);
+-      } else {
+-              host->dma_dir = DMA_TO_DEVICE;
+-              host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+-                                           data->sg_len,  host->dma_dir);
+-
+-              imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+-                               host->res->start + MMC_REG_BUFFER_ACCESS,
+-                               DMA_MODE_WRITE);
+-      }
+-
+-      wmb();
+-
+-      imx_dma_enable(host->dma);
+-#endif /* HAS_DMA */
+-}
+-
+-static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
+-              unsigned int cmdat)
+-{
+-      WARN_ON(host->cmd != NULL);
+-      host->cmd = cmd;
+-
+-      switch (mmc_resp_type(cmd)) {
+-      case MMC_RSP_R1: /* short CRC, OPCODE */
+-      case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
+-              cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
+-              break;
+-      case MMC_RSP_R2: /* long 136 bit + CRC */
+-              cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
+-              break;
+-      case MMC_RSP_R3: /* short */
+-              cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
+-              break;
+-      case MMC_RSP_NONE:
+-              break;
+-      default:
+-              dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
+-                              mmc_resp_type(cmd));
+-              cmd->error = -EINVAL;
+-              return -EINVAL;
+-      }
+-
+-      if (mxcmci_use_dma(host))
+-              writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN |
+-                              INT_END_CMD_RES_EN,
+-                              host->base + MMC_REG_INT_CNTR);
+-      else
+-              writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR);
+-
+-      writew(cmd->opcode, host->base + MMC_REG_CMD);
+-      writel(cmd->arg, host->base + MMC_REG_ARG);
+-      writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
+-
+-      return 0;
+-}
+-
+-static void mxcmci_finish_request(struct mxcmci_host *host,
+-              struct mmc_request *req)
+-{
+-      writel(0, host->base + MMC_REG_INT_CNTR);
+-
+-      host->req = NULL;
+-      host->cmd = NULL;
+-      host->data = NULL;
+-
+-      mmc_request_done(host->mmc, req);
+-}
+-
+-static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
+-{
+-      struct mmc_data *data = host->data;
+-      int data_error;
+-
+-#ifdef HAS_DMA
+-      if (mxcmci_use_dma(host)) {
+-              imx_dma_disable(host->dma);
+-              dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
+-                              host->dma_dir);
+-      }
+-#endif
+-
+-      if (stat & STATUS_ERR_MASK) {
+-              dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
+-                              stat);
+-              if (stat & STATUS_CRC_READ_ERR) {
+-                      data->error = -EILSEQ;
+-              } else if (stat & STATUS_CRC_WRITE_ERR) {
+-                      u32 err_code = (stat >> 9) & 0x3;
+-                      if (err_code == 2) /* No CRC response */
+-                              data->error = -ETIMEDOUT;
+-                      else
+-                              data->error = -EILSEQ;
+-              } else if (stat & STATUS_TIME_OUT_READ) {
+-                      data->error = -ETIMEDOUT;
+-              } else {
+-                      data->error = -EIO;
+-              }
+-      } else {
+-              data->bytes_xfered = host->datasize;
+-      }
+-
+-      data_error = data->error;
+-
+-      host->data = NULL;
+-
+-      return data_error;
+-}
+-
+-static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
+-{
+-      struct mmc_command *cmd = host->cmd;
+-      int i;
+-      u32 a, b, c;
+-
+-      if (!cmd)
+-              return;
+-
+-      if (stat & STATUS_TIME_OUT_RESP) {
+-              dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
+-              cmd->error = -ETIMEDOUT;
+-      } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+-              dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
+-              cmd->error = -EILSEQ;
+-      }
+-
+-      if (cmd->flags & MMC_RSP_PRESENT) {
+-              if (cmd->flags & MMC_RSP_136) {
+-                      for (i = 0; i < 4; i++) {
+-                              a = readw(host->base + MMC_REG_RES_FIFO);
+-                              b = readw(host->base + MMC_REG_RES_FIFO);
+-                              cmd->resp[i] = a << 16 | b;
+-                      }
+-              } else {
+-                      a = readw(host->base + MMC_REG_RES_FIFO);
+-                      b = readw(host->base + MMC_REG_RES_FIFO);
+-                      c = readw(host->base + MMC_REG_RES_FIFO);
+-                      cmd->resp[0] = a << 24 | b << 8 | c >> 8;
+-              }
+-      }
+-}
+-
+-static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
+-{
+-      u32 stat;
+-      unsigned long timeout = jiffies + HZ;
+-
+-      do {
+-              stat = readl(host->base + MMC_REG_STATUS);
+-              if (stat & STATUS_ERR_MASK)
+-                      return stat;
+-              if (time_after(jiffies, timeout))
+-                      return STATUS_TIME_OUT_READ;
+-              if (stat & mask)
+-                      return 0;
+-              cpu_relax();
+-      } while (1);
+-}
+-
+-static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
+-{
+-      unsigned int stat;
+-      u32 *buf = _buf;
+-
+-      while (bytes > 3) {
+-              stat = mxcmci_poll_status(host,
+-                              STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+-              if (stat)
+-                      return stat;
+-              *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
+-              bytes -= 4;
+-      }
+-
+-      if (bytes) {
+-              u8 *b = (u8 *)buf;
+-              u32 tmp;
+-
+-              stat = mxcmci_poll_status(host,
+-                              STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+-              if (stat)
+-                      return stat;
+-              tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
+-              memcpy(b, &tmp, bytes);
+-      }
+-
+-      return 0;
+-}
+-
+-static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
+-{
+-      unsigned int stat;
+-      u32 *buf = _buf;
+-
+-      while (bytes > 3) {
+-              stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+-              if (stat)
+-                      return stat;
+-              writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
+-              bytes -= 4;
+-      }
+-
+-      if (bytes) {
+-              u8 *b = (u8 *)buf;
+-              u32 tmp;
+-
+-              stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+-              if (stat)
+-                      return stat;
+-
+-              memcpy(&tmp, b, bytes);
+-              writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
+-      }
+-
+-      stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+-      if (stat)
+-              return stat;
+-
+-      return 0;
+-}
+-
+-static int mxcmci_transfer_data(struct mxcmci_host *host)
+-{
+-      struct mmc_data *data = host->req->data;
+-      struct scatterlist *sg;
+-      int stat, i;
+-
+-      host->datasize = 0;
+-
+-      host->data = data;
+-      host->datasize = 0;
+-
+-      if (data->flags & MMC_DATA_READ) {
+-              for_each_sg(data->sg, sg, data->sg_len, i) {
+-                      stat = mxcmci_pull(host, sg_virt(sg), sg->length);
+-                      if (stat)
+-                              return stat;
+-                      host->datasize += sg->length;
+-              }
+-      } else {
+-              for_each_sg(data->sg, sg, data->sg_len, i) {
+-                      stat = mxcmci_push(host, sg_virt(sg), sg->length);
+-                      if (stat)
+-                              return stat;
+-                      host->datasize += sg->length;
+-              }
+-              stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
+-              if (stat)
+-                      return stat;
+-      }
+-      return 0;
+-}
+-
+-static void mxcmci_datawork(struct work_struct *work)
+-{
+-      struct mxcmci_host *host = container_of(work, struct mxcmci_host,
+-                                                datawork);
+-      int datastat = mxcmci_transfer_data(host);
+-      mxcmci_finish_data(host, datastat);
+-
+-      if (host->req->stop) {
+-              if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+-                      mxcmci_finish_request(host, host->req);
+-                      return;
+-              }
+-      } else {
+-              mxcmci_finish_request(host, host->req);
+-      }
+-}
+-
+-#ifdef HAS_DMA
+-static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
+-{
+-      struct mmc_data *data = host->data;
+-      int data_error;
+-
+-      if (!data)
+-              return;
+-
+-      data_error = mxcmci_finish_data(host, stat);
+-
+-      mxcmci_read_response(host, stat);
+-      host->cmd = NULL;
+-
+-      if (host->req->stop) {
+-              if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+-                      mxcmci_finish_request(host, host->req);
+-                      return;
+-              }
+-      } else {
+-              mxcmci_finish_request(host, host->req);
+-      }
+-}
+-#endif /* HAS_DMA */
+-
+-static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
+-{
+-      mxcmci_read_response(host, stat);
+-      host->cmd = NULL;
+-
+-      if (!host->data && host->req) {
+-              mxcmci_finish_request(host, host->req);
+-              return;
+-      }
+-
+-      /* For the DMA case the DMA engine handles the data transfer
+-       * automatically. For non DMA we have to to it ourselves.
+-       * Don't do it in interrupt context though.
+-       */
+-      if (!mxcmci_use_dma(host) && host->data)
+-              schedule_work(&host->datawork);
+-
+-}
+-
+-static irqreturn_t mxcmci_irq(int irq, void *devid)
+-{
+-      struct mxcmci_host *host = devid;
+-      u32 stat;
+-
+-      stat = readl(host->base + MMC_REG_STATUS);
+-      writel(stat, host->base + MMC_REG_STATUS);
+-
+-      dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
+-
+-      if (stat & STATUS_END_CMD_RESP)
+-              mxcmci_cmd_done(host, stat);
+-#ifdef HAS_DMA
+-      if (mxcmci_use_dma(host) &&
+-                (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
+-              mxcmci_data_done(host, stat);
+-#endif
+-      return IRQ_HANDLED;
+-}
+-
+-static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
+-{
+-      struct mxcmci_host *host = mmc_priv(mmc);
+-      unsigned int cmdat = host->cmdat;
+-
+-      WARN_ON(host->req != NULL);
+-
+-      host->req = req;
+-      host->cmdat &= ~CMD_DAT_CONT_INIT;
+-#ifdef HAS_DMA
+-      host->do_dma = 1;
+-#endif
+-      if (req->data) {
+-              mxcmci_setup_data(host, req->data);
+-
+-              cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+-
+-              if (req->data->flags & MMC_DATA_WRITE)
+-                      cmdat |= CMD_DAT_CONT_WRITE;
+-      }
+-
+-      if (mxcmci_start_cmd(host, req->cmd, cmdat))
+-              mxcmci_finish_request(host, req);
+-}
+-
+-static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
+-{
+-      unsigned int divider;
+-      int prescaler = 0;
+-      unsigned int clk_in = clk_get_rate(host->clk);
+-
+-      while (prescaler <= 0x800) {
+-              for (divider = 1; divider <= 0xF; divider++) {
+-                      int x;
+-
+-                      x = (clk_in / (divider + 1));
+-
+-                      if (prescaler)
+-                              x /= (prescaler * 2);
+-
+-                      if (x <= clk_ios)
+-                              break;
+-              }
+-              if (divider < 0x10)
+-                      break;
+-
+-              if (prescaler == 0)
+-                      prescaler = 1;
+-              else
+-                      prescaler <<= 1;
+-      }
+-
+-      writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
+-
+-      dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
+-                      prescaler, divider, clk_in, clk_ios);
+-}
+-
+-static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+-{
+-      struct mxcmci_host *host = mmc_priv(mmc);
+-#ifdef HAS_DMA
+-      unsigned int blen;
+-      /*
+-       * use burstlen of 64 in 4 bit mode (--> reg value  0)
+-       * use burstlen of 16 in 1 bit mode (--> reg value 16)
+-       */
+-      if (ios->bus_width == MMC_BUS_WIDTH_4)
+-              blen = 0;
+-      else
+-              blen = 16;
+-
+-      imx_dma_config_burstlen(host->dma, blen);
+-#endif
+-      if (ios->bus_width == MMC_BUS_WIDTH_4)
+-              host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+-      else
+-              host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
+-
+-      if (host->power_mode != ios->power_mode) {
+-              if (host->pdata && host->pdata->setpower)
+-                      host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+-              host->power_mode = ios->power_mode;
+-              if (ios->power_mode == MMC_POWER_ON)
+-                      host->cmdat |= CMD_DAT_CONT_INIT;
+-      }
+-
+-      if (ios->clock) {
+-              mxcmci_set_clk_rate(host, ios->clock);
+-              writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+-      } else {
+-              writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
+-      }
+-
+-      host->clock = ios->clock;
+-}
+-
+-static irqreturn_t mxcmci_detect_irq(int irq, void *data)
+-{
+-      struct mmc_host *mmc = data;
+-
+-      dev_dbg(mmc_dev(mmc), "%s\n", __func__);
+-
+-      mmc_detect_change(mmc, msecs_to_jiffies(250));
+-      return IRQ_HANDLED;
+-}
+-
+-static int mxcmci_get_ro(struct mmc_host *mmc)
+-{
+-      struct mxcmci_host *host = mmc_priv(mmc);
+-
+-      if (host->pdata && host->pdata->get_ro)
+-              return !!host->pdata->get_ro(mmc_dev(mmc));
+-      /*
+-       * Board doesn't support read only detection; let the mmc core
+-       * decide what to do.
+-       */
+-      return -ENOSYS;
+-}
+-
+-
+-static const struct mmc_host_ops mxcmci_ops = {
+-      .request        = mxcmci_request,
+-      .set_ios        = mxcmci_set_ios,
+-      .get_ro         = mxcmci_get_ro,
+-};
+-
+-static int mxcmci_probe(struct platform_device *pdev)
+-{
+-      struct mmc_host *mmc;
+-      struct mxcmci_host *host = NULL;
+-      struct resource *r;
+-      int ret = 0, irq;
+-
+-      printk(KERN_INFO "i.MX SDHC driver\n");
+-
+-      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-      irq = platform_get_irq(pdev, 0);
+-      if (!r || irq < 0)
+-              return -EINVAL;
+-
+-      r = request_mem_region(r->start, resource_size(r), pdev->name);
+-      if (!r)
+-              return -EBUSY;
+-
+-      mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
+-      if (!mmc) {
+-              ret = -ENOMEM;
+-              goto out_release_mem;
+-      }
+-
+-      mmc->ops = &mxcmci_ops;
+-      mmc->caps = MMC_CAP_4_BIT_DATA;
+-
+-      /* MMC core transfer sizes tunable parameters */
+-      mmc->max_hw_segs = 64;
+-      mmc->max_phys_segs = 64;
+-      mmc->max_blk_size = 2048;
+-      mmc->max_blk_count = 65535;
+-      mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+-      mmc->max_seg_size = mmc->max_seg_size;
+-
+-      host = mmc_priv(mmc);
+-      host->base = ioremap(r->start, resource_size(r));
+-      if (!host->base) {
+-              ret = -ENOMEM;
+-              goto out_free;
+-      }
+-
+-      host->mmc = mmc;
+-      host->pdata = pdev->dev.platform_data;
+-
+-      if (host->pdata && host->pdata->ocr_avail)
+-              mmc->ocr_avail = host->pdata->ocr_avail;
+-      else
+-              mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+-
+-      host->res = r;
+-      host->irq = irq;
+-
+-      host->clk = clk_get(&pdev->dev, "sdhc_clk");
+-      if (IS_ERR(host->clk)) {
+-              ret = PTR_ERR(host->clk);
+-              goto out_iounmap;
+-      }
+-      clk_enable(host->clk);
+-
+-      mxcmci_softreset(host);
+-
+-      host->rev_no = readw(host->base + MMC_REG_REV_NO);
+-      if (host->rev_no != 0x400) {
+-              ret = -ENODEV;
+-              dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
+-                      host->rev_no);
+-              goto out_clk_put;
+-      }
+-
+-      mmc->f_min = clk_get_rate(host->clk) >> 7;
+-      mmc->f_max = clk_get_rate(host->clk) >> 1;
+-
+-      /* recommended in data sheet */
+-      writew(0x2db4, host->base + MMC_REG_READ_TO);
+-
+-      writel(0, host->base + MMC_REG_INT_CNTR);
+-
+-#ifdef HAS_DMA
+-      host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
+-      if (host->dma < 0) {
+-              dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
+-              ret = -EBUSY;
+-              goto out_clk_put;
+-      }
+-
+-      r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+-      if (!r) {
+-              ret = -EINVAL;
+-              goto out_free_dma;
+-      }
+-
+-      ret = imx_dma_config_channel(host->dma,
+-                                   IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+-                                   IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+-                                   r->start, 0);
+-      if (ret) {
+-              dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
+-              goto out_free_dma;
+-      }
+-#endif
+-      INIT_WORK(&host->datawork, mxcmci_datawork);
+-
+-      ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+-      if (ret)
+-              goto out_free_dma;
+-
+-      platform_set_drvdata(pdev, mmc);
+-
+-      if (host->pdata && host->pdata->init) {
+-              ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
+-                              host->mmc);
+-              if (ret)
+-                      goto out_free_irq;
+-      }
+-
+-      mmc_add_host(mmc);
+-
+-      return 0;
+-
+-out_free_irq:
+-      free_irq(host->irq, host);
+-out_free_dma:
+-#ifdef HAS_DMA
+-      imx_dma_free(host->dma);
+-#endif
+-out_clk_put:
+-      clk_disable(host->clk);
+-      clk_put(host->clk);
+-out_iounmap:
+-      iounmap(host->base);
+-out_free:
+-      mmc_free_host(mmc);
+-out_release_mem:
+-      release_mem_region(host->res->start, resource_size(host->res));
+-      return ret;
+-}
+-
+-static int mxcmci_remove(struct platform_device *pdev)
+-{
+-      struct mmc_host *mmc = platform_get_drvdata(pdev);
+-      struct mxcmci_host *host = mmc_priv(mmc);
+-
+-      platform_set_drvdata(pdev, NULL);
+-
+-      mmc_remove_host(mmc);
+-
+-      if (host->pdata && host->pdata->exit)
+-              host->pdata->exit(&pdev->dev, mmc);
+-
+-      free_irq(host->irq, host);
+-      iounmap(host->base);
+-#ifdef HAS_DMA
+-      imx_dma_free(host->dma);
+-#endif
+-      clk_disable(host->clk);
+-      clk_put(host->clk);
+-
+-      release_mem_region(host->res->start, resource_size(host->res));
+-      release_resource(host->res);
+-
+-      mmc_free_host(mmc);
+-
+-      return 0;
+-}
+-
+-#ifdef CONFIG_PM
+-static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+-{
+-      struct mmc_host *mmc = platform_get_drvdata(dev);
+-      int ret = 0;
+-
+-      if (mmc)
+-              ret = mmc_suspend_host(mmc, state);
+-
+-      return ret;
+-}
+-
+-static int mxcmci_resume(struct platform_device *dev)
+-{
+-      struct mmc_host *mmc = platform_get_drvdata(dev);
+-      struct mxcmci_host *host;
+-      int ret = 0;
+-
+-      if (mmc) {
+-              host = mmc_priv(mmc);
+-              ret = mmc_resume_host(mmc);
+-      }
+-
+-      return ret;
+-}
+-#else
+-#define mxcmci_suspend  NULL
+-#define mxcmci_resume   NULL
+-#endif /* CONFIG_PM */
+-
+-static struct platform_driver mxcmci_driver = {
+-      .probe          = mxcmci_probe,
+-      .remove         = mxcmci_remove,
+-      .suspend        = mxcmci_suspend,
+-      .resume         = mxcmci_resume,
+-      .driver         = {
+-              .name           = DRIVER_NAME,
+-              .owner          = THIS_MODULE,
+-      }
+-};
+-
+-static int __init mxcmci_init(void)
+-{
+-      return platform_driver_register(&mxcmci_driver);
+-}
+-
+-static void __exit mxcmci_exit(void)
+-{
+-      platform_driver_unregister(&mxcmci_driver);
+-}
+-
+-module_init(mxcmci_init);
+-module_exit(mxcmci_exit);
+-
+-MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
+-MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+-MODULE_LICENSE("GPL");
+-MODULE_ALIAS("platform:imx-mmc");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/omap_hsmmc.c linux-2.6.29-rc3.owrt/drivers/mmc/host/omap_hsmmc.c
+--- linux-2.6.29.owrt/drivers/mmc/host/omap_hsmmc.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/omap_hsmmc.c        2009-05-10 23:48:28.000000000 +0200
+@@ -55,7 +55,6 @@
+ #define VS30                  (1 << 25)
+ #define SDVS18                        (0x5 << 9)
+ #define SDVS30                        (0x6 << 9)
+-#define SDVS33                        (0x7 << 9)
+ #define SDVSCLR                       0xFFFFF1FF
+ #define SDVSDET                       0x00000400
+ #define AUTOIDLE              0x1
+@@ -376,32 +375,6 @@
+ }
+ #endif  /* CONFIG_MMC_DEBUG */
+-/*
+- * MMC controller internal state machines reset
+- *
+- * Used to reset command or data internal state machines, using respectively
+- *  SRC or SRD bit of SYSCTL register
+- * Can be called from interrupt context
+- */
+-static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+-              unsigned long bit)
+-{
+-      unsigned long i = 0;
+-      unsigned long limit = (loops_per_jiffy *
+-                              msecs_to_jiffies(MMC_TIMEOUT_MS));
+-
+-      OMAP_HSMMC_WRITE(host->base, SYSCTL,
+-                       OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+-
+-      while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+-              (i++ < limit))
+-              cpu_relax();
+-
+-      if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+-              dev_err(mmc_dev(host->mmc),
+-                      "Timeout waiting on controller reset in %s\n",
+-                      __func__);
+-}
+ /*
+  * MMC controller IRQ handler
+@@ -430,17 +403,21 @@
+                       (status & CMD_CRC)) {
+                       if (host->cmd) {
+                               if (status & CMD_TIMEOUT) {
+-                                      mmc_omap_reset_controller_fsm(host, SRC);
++                                      OMAP_HSMMC_WRITE(host->base, SYSCTL,
++                                              OMAP_HSMMC_READ(host->base,
++                                                              SYSCTL) | SRC);
++                                      while (OMAP_HSMMC_READ(host->base,
++                                                      SYSCTL) & SRC)
++                                              ;
++
+                                       host->cmd->error = -ETIMEDOUT;
+                               } else {
+                                       host->cmd->error = -EILSEQ;
+                               }
+                               end_cmd = 1;
+                       }
+-                      if (host->data) {
++                      if (host->data)
+                               mmc_dma_cleanup(host);
+-                              mmc_omap_reset_controller_fsm(host, SRD);
+-                      }
+               }
+               if ((status & DATA_TIMEOUT) ||
+                       (status & DATA_CRC)) {
+@@ -449,7 +426,12 @@
+                                       mmc_dma_cleanup(host);
+                               else
+                                       host->data->error = -EILSEQ;
+-                              mmc_omap_reset_controller_fsm(host, SRD);
++                              OMAP_HSMMC_WRITE(host->base, SYSCTL,
++                                      OMAP_HSMMC_READ(host->base,
++                                                      SYSCTL) | SRD);
++                              while (OMAP_HSMMC_READ(host->base,
++                                              SYSCTL) & SRD)
++                                      ;
+                               end_trans = 1;
+                       }
+               }
+@@ -474,20 +456,13 @@
+ }
+ /*
+- * Switch MMC interface voltage ... only relevant for MMC1.
+- *
+- * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+- * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+- * Some chips, like eMMC ones, use internal transceivers.
++ * Switch MMC operating voltage
+  */
+ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+ {
+       u32 reg_val = 0;
+       int ret;
+-      if (host->id != OMAP_MMC1_DEVID)
+-              return 0;
+-
+       /* Disable the clocks */
+       clk_disable(host->fclk);
+       clk_disable(host->iclk);
+@@ -510,26 +485,19 @@
+       OMAP_HSMMC_WRITE(host->base, HCTL,
+               OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+       reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+-
+       /*
+        * If a MMC dual voltage card is detected, the set_ios fn calls
+        * this fn with VDD bit set for 1.8V. Upon card removal from the
+        * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+        *
+-       * Cope with a bit of slop in the range ... per data sheets:
+-       *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+-       *    but recommended values are 1.71V to 1.89V
+-       *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+-       *    but recommended values are 2.7V to 3.3V
+-       *
+-       * Board setup code shouldn't permit anything very out-of-range.
+-       * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+-       * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
++       * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
++       * set in HCTL.
+        */
+-      if ((1 << vdd) <= MMC_VDD_23_24)
+-              reg_val |= SDVS18;
+-      else
++      if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
++                              ((1 << vdd) == MMC_VDD_33_34)))
+               reg_val |= SDVS30;
++      if ((1 << vdd) == MMC_VDD_165_195)
++              reg_val |= SDVS18;
+       OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+@@ -549,15 +517,16 @@
+ {
+       struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+                                               mmc_carddetect_work);
+-      struct omap_mmc_slot_data *slot = &mmc_slot(host);
+-
+-      host->carddetect = slot->card_detect(slot->card_detect_irq);
+       sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+       if (host->carddetect) {
+               mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+       } else {
+-              mmc_omap_reset_controller_fsm(host, SRD);
++              OMAP_HSMMC_WRITE(host->base, SYSCTL,
++                      OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
++              while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
++                      ;
++
+               mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+       }
+ }
+@@ -569,6 +538,7 @@
+ {
+       struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
++      host->carddetect = mmc_slot(host).card_detect(irq);
+       schedule_work(&host->mmc_carddetect_work);
+       return IRQ_HANDLED;
+@@ -787,14 +757,10 @@
+       case MMC_POWER_OFF:
+               mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+               /*
+-               * Reset interface voltage to 3V if it's 1.8V now;
+-               * only relevant on MMC-1, the others always use 1.8V.
+-               *
++               * Reset bus voltage to 3V if it got set to 1.8V earlier.
+                * REVISIT: If we are able to detect cards after unplugging
+                * a 1.8V card, this code should not be needed.
+                */
+-              if (host->id != OMAP_MMC1_DEVID)
+-                      break;
+               if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+                       int vdd = fls(host->mmc->ocr_avail) - 1;
+                       if (omap_mmc_switch_opcond(host, vdd) != 0)
+@@ -818,9 +784,7 @@
+       }
+       if (host->id == OMAP_MMC1_DEVID) {
+-              /* Only MMC1 can interface at 3V without some flavor
+-               * of external transceiver; but they all handle 1.8V.
+-               */
++              /* Only MMC1 can operate at 3V/1.8V */
+               if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+                       (ios->vdd == DUAL_VOLT_OCR_BIT)) {
+                               /*
+@@ -1173,9 +1137,7 @@
+                                               " level suspend\n");
+                       }
+-                      if (host->id == OMAP_MMC1_DEVID
+-                                      && !(OMAP_HSMMC_READ(host->base, HCTL)
+-                                                      & SDVSDET)) {
++                      if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+                               OMAP_HSMMC_WRITE(host->base, HCTL,
+                                       OMAP_HSMMC_READ(host->base, HCTL)
+                                       & SDVSCLR);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/pxamci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/pxamci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/pxamci.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/pxamci.c    2009-05-10 23:48:28.000000000 +0200
+@@ -180,15 +180,7 @@
+       else
+               DALGN &= ~(1 << host->dma);
+       DDADR(host->dma) = host->sg_dma;
+-
+-      /*
+-       * workaround for erratum #91:
+-       * only start DMA now if we are doing a read,
+-       * otherwise we wait until CMD/RESP has finished
+-       * before starting DMA.
+-       */
+-      if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+-              DCSR(host->dma) = DCSR_RUN;
++      DCSR(host->dma) = DCSR_RUN;
+ }
+ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
+@@ -259,28 +251,23 @@
+       if (stat & STAT_TIME_OUT_RESPONSE) {
+               cmd->error = -ETIMEDOUT;
+       } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
++#ifdef CONFIG_PXA27x
+               /*
+                * workaround for erratum #42:
+                * Intel PXA27x Family Processor Specification Update Rev 001
+                * A bogus CRC error can appear if the msb of a 136 bit
+                * response is a one.
+                */
+-              if (cpu_is_pxa27x() &&
+-                  (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
++              if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
+                       pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
+-              else
+-                      cmd->error = -EILSEQ;
++              } else
++#endif
++              cmd->error = -EILSEQ;
+       }
+       pxamci_disable_irq(host, END_CMD_RES);
+       if (host->data && !cmd->error) {
+               pxamci_enable_irq(host, DATA_TRAN_DONE);
+-              /*
+-               * workaround for erratum #91, if doing write
+-               * enable DMA late
+-               */
+-              if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+-                      DCSR(host->dma) = DCSR_RUN;
+       } else {
+               pxamci_finish_request(host, host->mrq);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/ricoh_mmc.c linux-2.6.29-rc3.owrt/drivers/mmc/host/ricoh_mmc.c
+--- linux-2.6.29.owrt/drivers/mmc/host/ricoh_mmc.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/ricoh_mmc.c 2009-05-10 23:48:28.000000000 +0200
+@@ -196,7 +196,7 @@
+       pci_set_drvdata(pdev, NULL);
+ }
+-static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state)
++static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+ {
+       struct pci_dev *fw_dev = NULL;
+@@ -210,7 +210,7 @@
+       return 0;
+ }
+-static int ricoh_mmc_resume_early(struct pci_dev *pdev)
++static int ricoh_mmc_resume(struct pci_dev *pdev)
+ {
+       struct pci_dev *fw_dev = NULL;
+@@ -229,8 +229,8 @@
+       .id_table =     pci_ids,
+       .probe =        ricoh_mmc_probe,
+       .remove =       __devexit_p(ricoh_mmc_remove),
+-      .suspend_late = ricoh_mmc_suspend_late,
+-      .resume_early = ricoh_mmc_resume_early,
++      .suspend =      ricoh_mmc_suspend,
++      .resume =       ricoh_mmc_resume,
+ };
+ /*****************************************************************************\
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/s3cmci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/s3cmci.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.c    2009-05-10 23:48:28.000000000 +0200
+@@ -329,7 +329,7 @@
+       to_ptr = host->base + host->sdidata;
+-      while ((fifo = fifo_free(host)) > 3) {
++      while ((fifo = fifo_free(host))) {
+               if (!host->pio_bytes) {
+                       res = get_data_buffer(host, &host->pio_bytes,
+                                                       &host->pio_ptr);
+@@ -793,7 +793,8 @@
+                             host->mem->start + host->sdidata);
+       if (!setup_ok) {
+-              s3c2410_dma_config(host->dma, 4, 0);
++              s3c2410_dma_config(host->dma, 4,
++                      (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+               s3c2410_dma_set_buffdone_fn(host->dma,
+                                           s3cmci_dma_done_callback);
+               s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/sdhci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/sdhci.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.c     2009-05-10 23:48:28.000000000 +0200
+@@ -1291,11 +1291,8 @@
+               if (host->cmd->data)
+                       DBG("Cannot wait for busy signal when also "
+                               "doing a data transfer");
+-              else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
++              else
+                       return;
+-
+-              /* The controller does not support the end-of-busy IRQ,
+-               * fall through and take the SDHCI_INT_RESPONSE */
+       }
+       if (intmask & SDHCI_INT_RESPONSE)
+@@ -1639,7 +1636,8 @@
+       mmc->f_max = host->max_clk;
+       mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+-      if (caps & SDHCI_CAN_DO_HISPD)
++      if ((caps & SDHCI_CAN_DO_HISPD) ||
++              (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+               mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+       mmc->ocr_avail = 0;
+@@ -1725,9 +1723,7 @@
+ #endif
+ #ifdef SDHCI_USE_LEDS_CLASS
+-      snprintf(host->led_name, sizeof(host->led_name),
+-              "%s::", mmc_hostname(mmc));
+-      host->led.name = host->led_name;
++      host->led.name = mmc_hostname(mmc);
+       host->led.brightness = LED_OFF;
+       host->led.default_trigger = mmc_hostname(mmc);
+       host->led.brightness_set = sdhci_led_control;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/sdhci.h linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.h
+--- linux-2.6.29.owrt/drivers/mmc/host/sdhci.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.h     2009-05-10 23:48:28.000000000 +0200
+@@ -208,8 +208,8 @@
+ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                        (1<<12)
+ /* Controller has an issue with buffer bits for small transfers */
+ #define SDHCI_QUIRK_BROKEN_SMALL_PIO                  (1<<13)
+-/* Controller does not provide transfer-complete interrupt when not busy */
+-#define SDHCI_QUIRK_NO_BUSY_IRQ                               (1<<14)
++/* Controller supports high speed but doesn't have the caps bit set */
++#define SDHCI_QUIRK_FORCE_HIGHSPEED                   (1<<14)
+       int                     irq;            /* Device IRQ */
+       void __iomem *          ioaddr;         /* Mapped address */
+@@ -222,7 +222,6 @@
+ #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+       struct led_classdev     led;            /* LED control */
+-      char   led_name[32];
+ #endif
+       spinlock_t              lock;           /* Mutex */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mmc/host/sdhci-pci.c linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-pci.c
+--- linux-2.6.29.owrt/drivers/mmc/host/sdhci-pci.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-pci.c 2009-05-10 23:48:28.000000000 +0200
+@@ -107,7 +107,6 @@
+ static const struct sdhci_pci_fixes sdhci_cafe = {
+       .quirks         = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+-                        SDHCI_QUIRK_NO_BUSY_IRQ |
+                         SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+ };
+@@ -145,7 +144,8 @@
+                         SDHCI_QUIRK_32BIT_DMA_SIZE |
+                         SDHCI_QUIRK_32BIT_ADMA_SIZE |
+                         SDHCI_QUIRK_RESET_AFTER_REQUEST |
+-                        SDHCI_QUIRK_BROKEN_SMALL_PIO;
++                        SDHCI_QUIRK_BROKEN_SMALL_PIO |
++                        SDHCI_QUIRK_FORCE_HIGHSPEED;
+       }
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/chips/map_rom.c linux-2.6.29-rc3.owrt/drivers/mtd/chips/map_rom.c
+--- linux-2.6.29.owrt/drivers/mtd/chips/map_rom.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/chips/map_rom.c  2009-05-10 23:48:28.000000000 +0200
+@@ -19,7 +19,6 @@
+ static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+ static void maprom_nop (struct mtd_info *);
+ static struct mtd_info *map_rom_probe(struct map_info *map);
+-static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
+ static struct mtd_chip_driver maprom_chipdrv = {
+       .probe  = map_rom_probe,
+@@ -43,7 +42,6 @@
+       mtd->read = maprom_read;
+       mtd->write = maprom_write;
+       mtd->sync = maprom_nop;
+-      mtd->erase = maprom_erase;
+       mtd->flags = MTD_CAP_ROM;
+       mtd->erasesize = map->size;
+       mtd->writesize = 1;
+@@ -73,12 +71,6 @@
+       return -EIO;
+ }
+-static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
+-{
+-      /* We do our best 8) */
+-      return -EROFS;
+-}
+-
+ static int __init map_rom_init(void)
+ {
+       register_mtd_chip_driver(&maprom_chipdrv);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/devices/Kconfig linux-2.6.29-rc3.owrt/drivers/mtd/devices/Kconfig
+--- linux-2.6.29.owrt/drivers/mtd/devices/Kconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/devices/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -120,6 +120,13 @@
+         doesn't have access to, memory beyond the mem=xxx limit, nvram,
+         memory on the video card, etc...
++config MTD_PS3VRAM
++      tristate "PS3 video RAM"
++      depends on FB_PS3
++      help
++        This driver allows you to use excess PS3 video RAM as volatile
++        storage or system swap.
++
+ config MTD_LART
+       tristate "28F160xx flash driver for LART"
+       depends on SA1100_LART
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/devices/Makefile linux-2.6.29-rc3.owrt/drivers/mtd/devices/Makefile
+--- linux-2.6.29.owrt/drivers/mtd/devices/Makefile     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/devices/Makefile 2009-05-10 23:48:28.000000000 +0200
+@@ -16,3 +16,4 @@
+ obj-$(CONFIG_MTD_BLOCK2MTD)   += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH)   += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80)      += m25p80.o
++obj-$(CONFIG_MTD_PS3VRAM)     += ps3vram.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/devices/mtd_dataflash.c linux-2.6.29-rc3.owrt/drivers/mtd/devices/mtd_dataflash.c
+--- linux-2.6.29.owrt/drivers/mtd/devices/mtd_dataflash.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/devices/mtd_dataflash.c  2009-05-10 23:48:28.000000000 +0200
+@@ -821,8 +821,7 @@
+                                       if (!(info->flags & IS_POW2PS))
+                                               return info;
+                               }
+-                      } else
+-                              return info;
++                      }
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/devices/ps3vram.c linux-2.6.29-rc3.owrt/drivers/mtd/devices/ps3vram.c
+--- linux-2.6.29.owrt/drivers/mtd/devices/ps3vram.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/mtd/devices/ps3vram.c        2009-05-10 23:48:28.000000000 +0200
+@@ -0,0 +1,768 @@
++/**
++ * ps3vram - Use extra PS3 video ram as MTD block device.
++ *
++ * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
++ * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
++ */
++
++#include <linux/io.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/slab.h>
++#include <linux/version.h>
++#include <linux/gfp.h>
++#include <linux/delay.h>
++#include <linux/mtd/mtd.h>
++
++#include <asm/lv1call.h>
++#include <asm/ps3.h>
++
++#define DEVICE_NAME           "ps3vram"
++
++#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
++#define XDR_IOIF 0x0c000000
++
++#define FIFO_BASE XDR_IOIF
++#define FIFO_SIZE (64 * 1024)
++
++#define DMA_PAGE_SIZE (4 * 1024)
++
++#define CACHE_PAGE_SIZE (256 * 1024)
++#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
++
++#define CACHE_OFFSET CACHE_PAGE_SIZE
++#define FIFO_OFFSET 0
++
++#define CTRL_PUT 0x10
++#define CTRL_GET 0x11
++#define CTRL_TOP 0x15
++
++#define UPLOAD_SUBCH  1
++#define DOWNLOAD_SUBCH        2
++
++#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN  0x0000030c
++#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY     0x00000104
++
++#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
++
++struct mtd_info ps3vram_mtd;
++
++#define CACHE_PAGE_PRESENT 1
++#define CACHE_PAGE_DIRTY   2
++
++struct ps3vram_tag {
++      unsigned int address;
++      unsigned int flags;
++};
++
++struct ps3vram_cache {
++      unsigned int page_count;
++      unsigned int page_size;
++      struct ps3vram_tag *tags;
++};
++
++struct ps3vram_priv {
++      u64 memory_handle;
++      u64 context_handle;
++      u32 *ctrl;
++      u32 *reports;
++      u8 __iomem *ddr_base;
++      u8 *xdr_buf;
++
++      u32 *fifo_base;
++      u32 *fifo_ptr;
++
++      struct device *dev;
++      struct ps3vram_cache cache;
++
++      /* Used to serialize cache/DMA operations */
++      struct mutex lock;
++};
++
++#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
++#define DMA_NOTIFIER_OFFSET_BASE 0x1000     /* first DMA notifier offset */
++#define DMA_NOTIFIER_SIZE        0x40
++#define NOTIFIER 7    /* notifier used for completion report */
++
++/* A trailing '-' means to subtract off ps3fb_videomemory.size */
++char *size = "256M-";
++module_param(size, charp, 0);
++MODULE_PARM_DESC(size, "memory size");
++
++static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
++{
++      return (void *) reports +
++              DMA_NOTIFIER_OFFSET_BASE +
++              DMA_NOTIFIER_SIZE * notifier;
++}
++
++static void ps3vram_notifier_reset(struct mtd_info *mtd)
++{
++      int i;
++
++      struct ps3vram_priv *priv = mtd->priv;
++      u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
++      for (i = 0; i < 4; i++)
++              notify[i] = 0xffffffff;
++}
++
++static int ps3vram_notifier_wait(struct mtd_info *mtd, unsigned int timeout_ms)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
++      unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
++
++      do {
++              if (!notify[3])
++                      return 0;
++              msleep(1);
++      } while (time_before(jiffies, timeout));
++
++      return -ETIMEDOUT;
++}
++
++static void ps3vram_init_ring(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
++      priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
++}
++
++static int ps3vram_wait_ring(struct mtd_info *mtd, unsigned int timeout_ms)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
++
++      do {
++              if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
++                      return 0;
++              msleep(1);
++      } while (time_before(jiffies, timeout));
++
++      dev_dbg(priv->dev, "%s:%d: FIFO timeout (%08x/%08x/%08x)\n", __func__,
++              __LINE__, priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
++              priv->ctrl[CTRL_TOP]);
++
++      return -ETIMEDOUT;
++}
++
++static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
++{
++      *(priv->fifo_ptr)++ = data;
++}
++
++static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan,
++                                    u32 tag, u32 size)
++{
++      ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
++}
++
++static void ps3vram_rewind_ring(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      u64 status;
++
++      ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
++
++      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
++
++      /* asking the HV for a blit will kick the fifo */
++      status = lv1_gpu_context_attribute(priv->context_handle,
++                                         L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
++                                         0, 0, 0, 0);
++      if (status)
++              dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
++                      __func__, __LINE__);
++
++      priv->fifo_ptr = priv->fifo_base;
++}
++
++static void ps3vram_fire_ring(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      u64 status;
++
++      mutex_lock(&ps3_gpu_mutex);
++
++      priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
++              (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
++
++      /* asking the HV for a blit will kick the fifo */
++      status = lv1_gpu_context_attribute(priv->context_handle,
++                                         L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
++                                         0, 0, 0, 0);
++      if (status)
++              dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
++                      __func__, __LINE__);
++
++      if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
++              FIFO_SIZE - 1024) {
++              dev_dbg(priv->dev, "%s:%d: fifo full, rewinding\n", __func__,
++                      __LINE__);
++              ps3vram_wait_ring(mtd, 200);
++              ps3vram_rewind_ring(mtd);
++      }
++
++      mutex_unlock(&ps3_gpu_mutex);
++}
++
++static void ps3vram_bind(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
++      ps3vram_out_ring(priv, 0x31337303);
++      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
++      ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
++      ps3vram_out_ring(priv, 0xfeed0001);     /* DMA system RAM instance */
++      ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
++
++      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
++      ps3vram_out_ring(priv, 0x3137c0de);
++      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
++      ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
++      ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
++      ps3vram_out_ring(priv, 0xfeed0001);     /* DMA system RAM instance */
++
++      ps3vram_fire_ring(mtd);
++}
++
++static int ps3vram_upload(struct mtd_info *mtd, unsigned int src_offset,
++                        unsigned int dst_offset, int len, int count)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      ps3vram_begin_ring(priv, UPLOAD_SUBCH,
++                         NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
++      ps3vram_out_ring(priv, XDR_IOIF + src_offset);
++      ps3vram_out_ring(priv, dst_offset);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, count);
++      ps3vram_out_ring(priv, (1 << 8) | 1);
++      ps3vram_out_ring(priv, 0);
++
++      ps3vram_notifier_reset(mtd);
++      ps3vram_begin_ring(priv, UPLOAD_SUBCH,
++                         NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
++      ps3vram_out_ring(priv, 0);
++      ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
++      ps3vram_out_ring(priv, 0);
++      ps3vram_fire_ring(mtd);
++      if (ps3vram_notifier_wait(mtd, 200) < 0) {
++              dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
++                      __LINE__);
++              return -1;
++      }
++
++      return 0;
++}
++
++static int ps3vram_download(struct mtd_info *mtd, unsigned int src_offset,
++                          unsigned int dst_offset, int len, int count)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
++                         NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
++      ps3vram_out_ring(priv, src_offset);
++      ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, len);
++      ps3vram_out_ring(priv, count);
++      ps3vram_out_ring(priv, (1 << 8) | 1);
++      ps3vram_out_ring(priv, 0);
++
++      ps3vram_notifier_reset(mtd);
++      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
++                         NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
++      ps3vram_out_ring(priv, 0);
++      ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
++      ps3vram_out_ring(priv, 0);
++      ps3vram_fire_ring(mtd);
++      if (ps3vram_notifier_wait(mtd, 200) < 0) {
++              dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
++                      __LINE__);
++              return -1;
++      }
++
++      return 0;
++}
++
++static void ps3vram_cache_evict(struct mtd_info *mtd, int entry)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      struct ps3vram_cache *cache = &priv->cache;
++
++      if (cache->tags[entry].flags & CACHE_PAGE_DIRTY) {
++              dev_dbg(priv->dev, "%s:%d: flushing %d : 0x%08x\n", __func__,
++                      __LINE__, entry, cache->tags[entry].address);
++              if (ps3vram_upload(mtd,
++                                 CACHE_OFFSET + entry * cache->page_size,
++                                 cache->tags[entry].address,
++                                 DMA_PAGE_SIZE,
++                                 cache->page_size / DMA_PAGE_SIZE) < 0) {
++                      dev_dbg(priv->dev, "%s:%d: failed to upload from "
++                              "0x%x to 0x%x size 0x%x\n", __func__, __LINE__,
++                              entry * cache->page_size,
++                              cache->tags[entry].address, cache->page_size);
++              }
++              cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
++      }
++}
++
++static void ps3vram_cache_load(struct mtd_info *mtd, int entry,
++                             unsigned int address)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      struct ps3vram_cache *cache = &priv->cache;
++
++      dev_dbg(priv->dev, "%s:%d: fetching %d : 0x%08x\n", __func__, __LINE__,
++              entry, address);
++      if (ps3vram_download(mtd,
++                           address,
++                           CACHE_OFFSET + entry * cache->page_size,
++                           DMA_PAGE_SIZE,
++                           cache->page_size / DMA_PAGE_SIZE) < 0) {
++              dev_err(priv->dev, "%s:%d: failed to download from "
++                      "0x%x to 0x%x size 0x%x\n", __func__, __LINE__, address,
++                      entry * cache->page_size, cache->page_size);
++      }
++
++      cache->tags[entry].address = address;
++      cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
++}
++
++
++static void ps3vram_cache_flush(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      struct ps3vram_cache *cache = &priv->cache;
++      int i;
++
++      dev_dbg(priv->dev, "%s:%d: FLUSH\n", __func__, __LINE__);
++      for (i = 0; i < cache->page_count; i++) {
++              ps3vram_cache_evict(mtd, i);
++              cache->tags[i].flags = 0;
++      }
++}
++
++static unsigned int ps3vram_cache_match(struct mtd_info *mtd, loff_t address)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      struct ps3vram_cache *cache = &priv->cache;
++      unsigned int base;
++      unsigned int offset;
++      int i;
++      static int counter;
++
++      offset = (unsigned int) (address & (cache->page_size - 1));
++      base = (unsigned int) (address - offset);
++
++      /* fully associative check */
++      for (i = 0; i < cache->page_count; i++) {
++              if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
++                  cache->tags[i].address == base) {
++                      dev_dbg(priv->dev, "%s:%d: found entry %d : 0x%08x\n",
++                              __func__, __LINE__, i, cache->tags[i].address);
++                      return i;
++              }
++      }
++
++      /* choose a random entry */
++      i = (jiffies + (counter++)) % cache->page_count;
++      dev_dbg(priv->dev, "%s:%d: using entry %d\n", __func__, __LINE__, i);
++
++      ps3vram_cache_evict(mtd, i);
++      ps3vram_cache_load(mtd, i, base);
++
++      return i;
++}
++
++static int ps3vram_cache_init(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      priv->cache.page_count = CACHE_PAGE_COUNT;
++      priv->cache.page_size = CACHE_PAGE_SIZE;
++      priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
++                                 CACHE_PAGE_COUNT, GFP_KERNEL);
++      if (priv->cache.tags == NULL) {
++              dev_err(priv->dev, "%s:%d: could not allocate cache tags\n",
++                      __func__, __LINE__);
++              return -ENOMEM;
++      }
++
++      dev_info(priv->dev, "created ram cache: %d entries, %d KiB each\n",
++              CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
++
++      return 0;
++}
++
++static void ps3vram_cache_cleanup(struct mtd_info *mtd)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      ps3vram_cache_flush(mtd);
++      kfree(priv->cache.tags);
++}
++
++static int ps3vram_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++
++      if (instr->addr + instr->len > mtd->size)
++              return -EINVAL;
++
++      mutex_lock(&priv->lock);
++
++      ps3vram_cache_flush(mtd);
++
++      /* Set bytes to 0xFF */
++      memset_io(priv->ddr_base + instr->addr, 0xFF, instr->len);
++
++      mutex_unlock(&priv->lock);
++
++      instr->state = MTD_ERASE_DONE;
++      mtd_erase_callback(instr);
++
++      return 0;
++}
++
++static int ps3vram_read(struct mtd_info *mtd, loff_t from, size_t len,
++                      size_t *retlen, u_char *buf)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      unsigned int cached, count;
++
++      dev_dbg(priv->dev, "%s:%d: from=0x%08x len=0x%zx\n", __func__, __LINE__,
++              (unsigned int)from, len);
++
++      if (from >= mtd->size)
++              return -EINVAL;
++
++      if (len > mtd->size - from)
++              len = mtd->size - from;
++
++      /* Copy from vram to buf */
++      count = len;
++      while (count) {
++              unsigned int offset, avail;
++              unsigned int entry;
++
++              offset = (unsigned int) (from & (priv->cache.page_size - 1));
++              avail  = priv->cache.page_size - offset;
++
++              mutex_lock(&priv->lock);
++
++              entry = ps3vram_cache_match(mtd, from);
++              cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
++
++              dev_dbg(priv->dev, "%s:%d: from=%08x cached=%08x offset=%08x "
++                      "avail=%08x count=%08x\n", __func__, __LINE__,
++                      (unsigned int)from, cached, offset, avail, count);
++
++              if (avail > count)
++                      avail = count;
++              memcpy(buf, priv->xdr_buf + cached, avail);
++
++              mutex_unlock(&priv->lock);
++
++              buf += avail;
++              count -= avail;
++              from += avail;
++      }
++
++      *retlen = len;
++      return 0;
++}
++
++static int ps3vram_write(struct mtd_info *mtd, loff_t to, size_t len,
++                       size_t *retlen, const u_char *buf)
++{
++      struct ps3vram_priv *priv = mtd->priv;
++      unsigned int cached, count;
++
++      if (to >= mtd->size)
++              return -EINVAL;
++
++      if (len > mtd->size - to)
++              len = mtd->size - to;
++
++      /* Copy from buf to vram */
++      count = len;
++      while (count) {
++              unsigned int offset, avail;
++              unsigned int entry;
++
++              offset = (unsigned int) (to & (priv->cache.page_size - 1));
++              avail  = priv->cache.page_size - offset;
++
++              mutex_lock(&priv->lock);
++
++              entry = ps3vram_cache_match(mtd, to);
++              cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
++
++              dev_dbg(priv->dev, "%s:%d: to=%08x cached=%08x offset=%08x "
++                      "avail=%08x count=%08x\n", __func__, __LINE__,
++                      (unsigned int)to, cached, offset, avail, count);
++
++              if (avail > count)
++                      avail = count;
++              memcpy(priv->xdr_buf + cached, buf, avail);
++
++              priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
++
++              mutex_unlock(&priv->lock);
++
++              buf += avail;
++              count -= avail;
++              to += avail;
++      }
++
++      *retlen = len;
++      return 0;
++}
++
++static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
++{
++      struct ps3vram_priv *priv;
++      int status;
++      u64 ddr_lpar;
++      u64 ctrl_lpar;
++      u64 info_lpar;
++      u64 reports_lpar;
++      u64 ddr_size;
++      u64 reports_size;
++      int ret = -ENOMEM;
++      char *rest;
++
++      ret = -EIO;
++      ps3vram_mtd.priv = kzalloc(sizeof(struct ps3vram_priv), GFP_KERNEL);
++      if (!ps3vram_mtd.priv)
++              goto out;
++      priv = ps3vram_mtd.priv;
++
++      mutex_init(&priv->lock);
++      priv->dev = &dev->core;
++
++      /* Allocate XDR buffer (1MiB aligned) */
++      priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
++              get_order(XDR_BUF_SIZE));
++      if (priv->xdr_buf == NULL) {
++              dev_dbg(&dev->core, "%s:%d: could not allocate XDR buffer\n",
++                      __func__, __LINE__);
++              ret = -ENOMEM;
++              goto out_free_priv;
++      }
++
++      /* Put FIFO at begginning of XDR buffer */
++      priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
++      priv->fifo_ptr = priv->fifo_base;
++
++      /* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
++      if (ps3_open_hv_device(dev)) {
++              dev_err(&dev->core, "%s:%d: ps3_open_hv_device failed\n",
++                      __func__, __LINE__);
++              ret = -EAGAIN;
++              goto out_close_gpu;
++      }
++
++      /* Request memory */
++      status = -1;
++      ddr_size = memparse(size, &rest);
++      if (*rest == '-')
++              ddr_size -= ps3fb_videomemory.size;
++      ddr_size = ALIGN(ddr_size, 1024*1024);
++      if (ddr_size <= 0) {
++              dev_err(&dev->core, "%s:%d: specified size is too small\n",
++                      __func__, __LINE__);
++              ret = -EINVAL;
++              goto out_close_gpu;
++      }
++
++      while (ddr_size > 0) {
++              status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
++                                               &priv->memory_handle,
++                                               &ddr_lpar);
++              if (!status)
++                      break;
++              ddr_size -= 1024*1024;
++      }
++      if (status || ddr_size <= 0) {
++              dev_err(&dev->core, "%s:%d: lv1_gpu_memory_allocate failed\n",
++                      __func__, __LINE__);
++              ret = -ENOMEM;
++              goto out_free_xdr_buf;
++      }
++
++      /* Request context */
++      status = lv1_gpu_context_allocate(priv->memory_handle,
++                                        0,
++                                        &priv->context_handle,
++                                        &ctrl_lpar,
++                                        &info_lpar,
++                                        &reports_lpar,
++                                        &reports_size);
++      if (status) {
++              dev_err(&dev->core, "%s:%d: lv1_gpu_context_allocate failed\n",
++                      __func__, __LINE__);
++              ret = -ENOMEM;
++              goto out_free_memory;
++      }
++
++      /* Map XDR buffer to RSX */
++      status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
++                                     ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
++                                     XDR_BUF_SIZE, 0);
++      if (status) {
++              dev_err(&dev->core, "%s:%d: lv1_gpu_context_iomap failed\n",
++                      __func__, __LINE__);
++              ret = -ENOMEM;
++              goto out_free_context;
++      }
++
++      priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
++
++      if (!priv->ddr_base) {
++              dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
++                      __LINE__);
++              ret = -ENOMEM;
++              goto out_free_context;
++      }
++
++      priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
++      if (!priv->ctrl) {
++              dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
++                      __LINE__);
++              ret = -ENOMEM;
++              goto out_unmap_vram;
++      }
++
++      priv->reports = ioremap(reports_lpar, reports_size);
++      if (!priv->reports) {
++              dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
++                      __LINE__);
++              ret = -ENOMEM;
++              goto out_unmap_ctrl;
++      }
++
++      mutex_lock(&ps3_gpu_mutex);
++      ps3vram_init_ring(&ps3vram_mtd);
++      mutex_unlock(&ps3_gpu_mutex);
++
++      ps3vram_mtd.name = "ps3vram";
++      ps3vram_mtd.size = ddr_size;
++      ps3vram_mtd.flags = MTD_CAP_RAM;
++      ps3vram_mtd.erase = ps3vram_erase;
++      ps3vram_mtd.point = NULL;
++      ps3vram_mtd.unpoint = NULL;
++      ps3vram_mtd.read = ps3vram_read;
++      ps3vram_mtd.write = ps3vram_write;
++      ps3vram_mtd.owner = THIS_MODULE;
++      ps3vram_mtd.type = MTD_RAM;
++      ps3vram_mtd.erasesize = CACHE_PAGE_SIZE;
++      ps3vram_mtd.writesize = 1;
++
++      ps3vram_bind(&ps3vram_mtd);
++
++      mutex_lock(&ps3_gpu_mutex);
++      ret = ps3vram_wait_ring(&ps3vram_mtd, 100);
++      mutex_unlock(&ps3_gpu_mutex);
++      if (ret < 0) {
++              dev_err(&dev->core, "%s:%d: failed to initialize channels\n",
++                      __func__, __LINE__);
++              ret = -ETIMEDOUT;
++              goto out_unmap_reports;
++      }
++
++      ps3vram_cache_init(&ps3vram_mtd);
++
++      if (add_mtd_device(&ps3vram_mtd)) {
++              dev_err(&dev->core, "%s:%d: add_mtd_device failed\n",
++                      __func__, __LINE__);
++              ret = -EAGAIN;
++              goto out_cache_cleanup;
++      }
++
++      dev_info(&dev->core, "reserved %u MiB of gpu memory\n",
++              (unsigned int)(ddr_size / 1024 / 1024));
++
++      return 0;
++
++out_cache_cleanup:
++      ps3vram_cache_cleanup(&ps3vram_mtd);
++out_unmap_reports:
++      iounmap(priv->reports);
++out_unmap_ctrl:
++      iounmap(priv->ctrl);
++out_unmap_vram:
++      iounmap(priv->ddr_base);
++out_free_context:
++      lv1_gpu_context_free(priv->context_handle);
++out_free_memory:
++      lv1_gpu_memory_free(priv->memory_handle);
++out_close_gpu:
++      ps3_close_hv_device(dev);
++out_free_xdr_buf:
++      free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
++out_free_priv:
++      kfree(ps3vram_mtd.priv);
++      ps3vram_mtd.priv = NULL;
++out:
++      return ret;
++}
++
++static int ps3vram_shutdown(struct ps3_system_bus_device *dev)
++{
++      struct ps3vram_priv *priv;
++
++      priv = ps3vram_mtd.priv;
++
++      del_mtd_device(&ps3vram_mtd);
++      ps3vram_cache_cleanup(&ps3vram_mtd);
++      iounmap(priv->reports);
++      iounmap(priv->ctrl);
++      iounmap(priv->ddr_base);
++      lv1_gpu_context_free(priv->context_handle);
++      lv1_gpu_memory_free(priv->memory_handle);
++      ps3_close_hv_device(dev);
++      free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
++      kfree(priv);
++      return 0;
++}
++
++static struct ps3_system_bus_driver ps3vram_driver = {
++      .match_id       = PS3_MATCH_ID_GPU,
++      .match_sub_id   = PS3_MATCH_SUB_ID_GPU_RAMDISK,
++      .core.name      = DEVICE_NAME,
++      .core.owner     = THIS_MODULE,
++      .probe          = ps3vram_probe,
++      .remove         = ps3vram_shutdown,
++      .shutdown       = ps3vram_shutdown,
++};
++
++static int __init ps3vram_init(void)
++{
++      return ps3_system_bus_driver_register(&ps3vram_driver);
++}
++
++static void __exit ps3vram_exit(void)
++{
++      ps3_system_bus_driver_unregister(&ps3vram_driver);
++}
++
++module_init(ps3vram_init);
++module_exit(ps3vram_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Jim Paris <jim@jtan.com>");
++MODULE_DESCRIPTION("MTD driver for PS3 video RAM");
++MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/devices/slram.c linux-2.6.29-rc3.owrt/drivers/mtd/devices/slram.c
+--- linux-2.6.29.owrt/drivers/mtd/devices/slram.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/devices/slram.c  2009-05-10 23:48:28.000000000 +0200
+@@ -267,28 +267,22 @@
+       if (*(szlength) != '+') {
+               devlength = simple_strtoul(szlength, &buffer, 0);
+               devlength = handle_unit(devlength, buffer) - devstart;
+-              if (devlength < devstart)
+-                      goto err_out;
+-
+-              devlength -= devstart;
+       } else {
+               devlength = simple_strtoul(szlength + 1, &buffer, 0);
+               devlength = handle_unit(devlength, buffer);
+       }
+       T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
+                       devname, devstart, devlength);
+-      if (devlength % SLRAM_BLK_SZ != 0)
+-              goto err_out;
++      if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
++              E("slram: Illegal start / length parameter.\n");
++              return(-EINVAL);
++      }
+       if ((devstart = register_device(devname, devstart, devlength))){
+               unregister_devices();
+               return((int)devstart);
+       }
+       return(0);
+-
+-err_out:
+-      E("slram: Illegal length parameter.\n");
+-      return(-EINVAL);
+ }
+ #ifndef MODULE
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/lpddr/Kconfig linux-2.6.29-rc3.owrt/drivers/mtd/lpddr/Kconfig
+--- linux-2.6.29.owrt/drivers/mtd/lpddr/Kconfig        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/lpddr/Kconfig    2009-05-10 23:48:28.000000000 +0200
+@@ -12,7 +12,6 @@
+         DDR memories, intended for battery-operated systems.
+ config MTD_QINFO_PROBE
+-      depends on MTD_LPDDR
+       tristate "Detect flash chips by QINFO probe"
+       help
+           Device Information for LPDDR chips is offered through the Overlay
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/maps/bfin-async-flash.c linux-2.6.29-rc3.owrt/drivers/mtd/maps/bfin-async-flash.c
+--- linux-2.6.29.owrt/drivers/mtd/maps/bfin-async-flash.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/maps/bfin-async-flash.c  2009-05-10 23:48:28.000000000 +0200
+@@ -152,18 +152,14 @@
+       if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+               pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+-              kfree(state);
+               return -EBUSY;
+       }
+       gpio_direction_output(state->enet_flash_pin, 1);
+       pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+       state->mtd = do_map_probe(memory->name, &state->map);
+-      if (!state->mtd) {
+-              gpio_free(state->enet_flash_pin);
+-              kfree(state);
++      if (!state->mtd)
+               return -ENXIO;
+-      }
+ #ifdef CONFIG_MTD_PARTITIONS
+       ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/maps/ck804xrom.c linux-2.6.29-rc3.owrt/drivers/mtd/maps/ck804xrom.c
+--- linux-2.6.29.owrt/drivers/mtd/maps/ck804xrom.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/maps/ck804xrom.c 2009-05-10 23:48:28.000000000 +0200
+@@ -342,9 +342,9 @@
+       { 0, }
+ };
+-#if 0
+ MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
++#if 0
+ static struct pci_driver ck804xrom_driver = {
+       .name =         MOD_NAME,
+       .id_table =     ck804xrom_pci_tbl,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/maps/Kconfig linux-2.6.29-rc3.owrt/drivers/mtd/maps/Kconfig
+--- linux-2.6.29.owrt/drivers/mtd/maps/Kconfig 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/maps/Kconfig     2009-05-10 23:48:28.000000000 +0200
+@@ -491,7 +491,7 @@
+ config MTD_BFIN_ASYNC
+       tristate "Blackfin BF533-STAMP Flash Chip Support"
+-      depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
++      depends on BFIN533_STAMP && MTD_CFI
+       select MTD_PARTITIONS
+       default y
+       help
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/maps/physmap.c linux-2.6.29-rc3.owrt/drivers/mtd/maps/physmap.c
+--- linux-2.6.29.owrt/drivers/mtd/maps/physmap.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/maps/physmap.c   2009-05-10 23:48:28.000000000 +0200
+@@ -29,7 +29,6 @@
+       struct map_info         map[MAX_RESOURCES];
+ #ifdef CONFIG_MTD_PARTITIONS
+       int                     nr_parts;
+-      struct mtd_partition    *parts;
+ #endif
+ };
+@@ -46,29 +45,25 @@
+       physmap_data = dev->dev.platform_data;
+-      if (info->cmtd) {
+-#ifdef CONFIG_MTD_PARTITIONS
+-              if (info->nr_parts || physmap_data->nr_parts)
+-                      del_mtd_partitions(info->cmtd);
+-              else
+-                      del_mtd_device(info->cmtd);
+-#else
+-              del_mtd_device(info->cmtd);
+-#endif
+-      }
+-#ifdef CONFIG_MTD_PARTITIONS
+-      if (info->nr_parts)
+-              kfree(info->parts);
+-#endif
+-
+ #ifdef CONFIG_MTD_CONCAT
+-      if (info->cmtd != info->mtd[0])
++      if (info->cmtd != info->mtd[0]) {
++              del_mtd_device(info->cmtd);
+               mtd_concat_destroy(info->cmtd);
++      }
+ #endif
+       for (i = 0; i < MAX_RESOURCES; i++) {
+-              if (info->mtd[i] != NULL)
++              if (info->mtd[i] != NULL) {
++#ifdef CONFIG_MTD_PARTITIONS
++                      if (info->nr_parts || physmap_data->nr_parts)
++                              del_mtd_partitions(info->mtd[i]);
++                      else
++                              del_mtd_device(info->mtd[i]);
++#else
++                      del_mtd_device(info->mtd[i]);
++#endif
+                       map_destroy(info->mtd[i]);
++              }
+       }
+       return 0;
+ }
+@@ -91,6 +86,9 @@
+       int err = 0;
+       int i;
+       int devices_found = 0;
++#ifdef CONFIG_MTD_PARTITIONS
++      struct mtd_partition *parts;
++#endif
+       physmap_data = dev->dev.platform_data;
+       if (physmap_data == NULL)
+@@ -169,11 +167,10 @@
+               goto err_out;
+ #ifdef CONFIG_MTD_PARTITIONS
+-      err = parse_mtd_partitions(info->cmtd, part_probe_types,
+-                              &info->parts, 0);
++      err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0);
+       if (err > 0) {
+-              add_mtd_partitions(info->cmtd, info->parts, err);
+-              info->nr_parts = err;
++              add_mtd_partitions(info->cmtd, parts, err);
++              kfree(parts);
+               return 0;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/maps/sa1100-flash.c linux-2.6.29-rc3.owrt/drivers/mtd/maps/sa1100-flash.c
+--- linux-2.6.29.owrt/drivers/mtd/maps/sa1100-flash.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/maps/sa1100-flash.c      2009-05-10 23:48:28.000000000 +0200
+@@ -453,7 +453,7 @@
+       .resume         = sa1100_mtd_resume,
+       .shutdown       = sa1100_mtd_shutdown,
+       .driver         = {
+-              .name   = "sa1100-mtd",
++              .name   = "flash",
+               .owner  = THIS_MODULE,
+       },
+ };
+@@ -474,4 +474,4 @@
+ MODULE_AUTHOR("Nicolas Pitre");
+ MODULE_DESCRIPTION("SA1100 CFI map driver");
+ MODULE_LICENSE("GPL");
+-MODULE_ALIAS("platform:sa1100-mtd");
++MODULE_ALIAS("platform:flash");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/nand/atmel_nand.c linux-2.6.29-rc3.owrt/drivers/mtd/nand/atmel_nand.c
+--- linux-2.6.29.owrt/drivers/mtd/nand/atmel_nand.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/nand/atmel_nand.c        2009-05-10 23:48:28.000000000 +0200
+@@ -139,8 +139,7 @@
+       struct nand_chip *nand_chip = mtd->priv;
+       struct atmel_nand_host *host = nand_chip->priv;
+-      return gpio_get_value(host->board->rdy_pin) ^
+-                !!host->board->rdy_pin_active_low;
++      return gpio_get_value(host->board->rdy_pin);
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/nand/orion_nand.c linux-2.6.29-rc3.owrt/drivers/mtd/nand/orion_nand.c
+--- linux-2.6.29.owrt/drivers/mtd/nand/orion_nand.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/nand/orion_nand.c        2009-05-10 23:48:28.000000000 +0200
+@@ -149,7 +149,7 @@
+ static struct platform_driver orion_nand_driver = {
+       .probe          = orion_nand_probe,
+-      .remove         = __devexit_p(orion_nand_remove),
++      .remove         = orion_nand_remove,
+       .driver         = {
+               .name   = "orion_nand",
+               .owner  = THIS_MODULE,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/build.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/build.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/build.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/build.c      2009-05-10 23:48:28.000000000 +0200
+@@ -263,12 +263,8 @@
+       return ret;
+ }
+-static void dev_release(struct device *dev)
+-{
+-      struct ubi_device *ubi = container_of(dev, struct ubi_device, dev);
+-
+-      kfree(ubi);
+-}
++/* Fake "release" method for UBI devices */
++static void dev_release(struct device *dev) { }
+ /**
+  * ubi_sysfs_init - initialize sysfs for an UBI device.
+@@ -384,7 +380,7 @@
+  */
+ static int uif_init(struct ubi_device *ubi)
+ {
+-      int i, err;
++      int i, err, do_free = 0;
+       dev_t dev;
+       sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
+@@ -431,10 +427,13 @@
+ out_volumes:
+       kill_volumes(ubi);
++      do_free = 0;
+ out_sysfs:
+       ubi_sysfs_close(ubi);
+       cdev_del(&ubi->cdev);
+ out_unreg:
++      if (do_free)
++              free_user_volumes(ubi);
+       unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
+       ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
+       return err;
+@@ -948,12 +947,6 @@
+       if (ubi->bgt_thread)
+               kthread_stop(ubi->bgt_thread);
+-      /*
+-       * Get a reference to the device in order to prevent 'dev_release()'
+-       * from freeing @ubi object.
+-       */
+-      get_device(&ubi->dev);
+-
+       uif_close(ubi);
+       ubi_wl_close(ubi);
+       free_internal_volumes(ubi);
+@@ -965,7 +958,7 @@
+       vfree(ubi->dbg_peb_buf);
+ #endif
+       ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
+-      put_device(&ubi->dev);
++      kfree(ubi);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/cdev.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/cdev.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/cdev.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/cdev.c       2009-05-10 23:48:28.000000000 +0200
+@@ -40,9 +40,9 @@
+ #include <linux/ioctl.h>
+ #include <linux/capability.h>
+ #include <linux/uaccess.h>
+-#include <linux/compat.h>
+-#include <linux/math64.h>
++#include <linux/smp_lock.h>
+ #include <mtd/ubi-user.h>
++#include <asm/div64.h>
+ #include "ubi.h"
+ /**
+@@ -195,6 +195,7 @@
+       int err, lnum, off, len,  tbuf_size;
+       size_t count_save = count;
+       void *tbuf;
++      uint64_t tmp;
+       dbg_gen("read %zd bytes from offset %lld of volume %d",
+               count, *offp, vol->vol_id);
+@@ -224,7 +225,10 @@
+               return -ENOMEM;
+       len = count > tbuf_size ? tbuf_size : count;
+-      lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
++
++      tmp = *offp;
++      off = do_div(tmp, vol->usable_leb_size);
++      lnum = tmp;
+       do {
+               cond_resched();
+@@ -259,9 +263,12 @@
+       return err ? err : count_save - count;
+ }
++#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
++
+ /*
+  * This function allows to directly write to dynamic UBI volumes, without
+- * issuing the volume update operation.
++ * issuing the volume update operation. Available only as a debugging feature.
++ * Very useful for testing UBI.
+  */
+ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
+                                    size_t count, loff_t *offp)
+@@ -272,9 +279,7 @@
+       int lnum, off, len, tbuf_size, err = 0;
+       size_t count_save = count;
+       char *tbuf;
+-
+-      if (!vol->direct_writes)
+-              return -EPERM;
++      uint64_t tmp;
+       dbg_gen("requested: write %zd bytes to offset %lld of volume %u",
+               count, *offp, vol->vol_id);
+@@ -282,7 +287,10 @@
+       if (vol->vol_type == UBI_STATIC_VOLUME)
+               return -EROFS;
+-      lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
++      tmp = *offp;
++      off = do_div(tmp, vol->usable_leb_size);
++      lnum = tmp;
++
+       if (off & (ubi->min_io_size - 1)) {
+               dbg_err("unaligned position");
+               return -EINVAL;
+@@ -339,6 +347,10 @@
+       return err ? err : count_save - count;
+ }
++#else
++#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM)
++#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
++
+ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
+                             size_t count, loff_t *offp)
+ {
+@@ -390,8 +402,8 @@
+       return count;
+ }
+-static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
+-                         unsigned long arg)
++static int vol_cdev_ioctl(struct inode *inode, struct file *file,
++                        unsigned int cmd, unsigned long arg)
+ {
+       int err = 0;
+       struct ubi_volume_desc *desc = file->private_data;
+@@ -475,6 +487,7 @@
+               break;
+       }
++#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+       /* Logical eraseblock erasure command */
+       case UBI_IOCEBER:
+       {
+@@ -505,77 +518,13 @@
+               err = ubi_wl_flush(ubi);
+               break;
+       }
+-
+-      /* Logical eraseblock map command */
+-      case UBI_IOCEBMAP:
+-      {
+-              struct ubi_map_req req;
+-
+-              err = copy_from_user(&req, argp, sizeof(struct ubi_map_req));
+-              if (err) {
+-                      err = -EFAULT;
+-                      break;
+-              }
+-              err = ubi_leb_map(desc, req.lnum, req.dtype);
+-              break;
+-      }
+-
+-      /* Logical eraseblock un-map command */
+-      case UBI_IOCEBUNMAP:
+-      {
+-              int32_t lnum;
+-
+-              err = get_user(lnum, (__user int32_t *)argp);
+-              if (err) {
+-                      err = -EFAULT;
+-                      break;
+-              }
+-              err = ubi_leb_unmap(desc, lnum);
+-              break;
+-      }
+-
+-      /* Check if logical eraseblock is mapped command */
+-      case UBI_IOCEBISMAP:
+-      {
+-              int32_t lnum;
+-
+-              err = get_user(lnum, (__user int32_t *)argp);
+-              if (err) {
+-                      err = -EFAULT;
+-                      break;
+-              }
+-              err = ubi_is_mapped(desc, lnum);
+-              break;
+-      }
+-
+-      /* Set volume property command*/
+-      case UBI_IOCSETPROP:
+-      {
+-              struct ubi_set_prop_req req;
+-
+-              err = copy_from_user(&req, argp,
+-                              sizeof(struct ubi_set_prop_req));
+-              if (err) {
+-                      err = -EFAULT;
+-                      break;
+-              }
+-              switch (req.property) {
+-              case UBI_PROP_DIRECT_WRITE:
+-                      mutex_lock(&ubi->volumes_mutex);
+-                      desc->vol->direct_writes = !!req.value;
+-                      mutex_unlock(&ubi->volumes_mutex);
+-                      break;
+-              default:
+-                      err = -EINVAL;
+-                      break;
+-              }
+-              break;
+-      }
++#endif
+       default:
+               err = -ENOTTY;
+               break;
+       }
++
+       return err;
+ }
+@@ -813,8 +762,8 @@
+       return err;
+ }
+-static long ubi_cdev_ioctl(struct file *file, unsigned int cmd,
+-                         unsigned long arg)
++static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
++                        unsigned int cmd, unsigned long arg)
+ {
+       int err = 0;
+       struct ubi_device *ubi;
+@@ -824,7 +773,7 @@
+       if (!capable(CAP_SYS_RESOURCE))
+               return -EPERM;
+-      ubi = ubi_get_by_major(imajor(file->f_mapping->host));
++      ubi = ubi_get_by_major(imajor(inode));
+       if (!ubi)
+               return -ENODEV;
+@@ -894,6 +843,7 @@
+       case UBI_IOCRSVOL:
+       {
+               int pebs;
++              uint64_t tmp;
+               struct ubi_rsvol_req req;
+               dbg_gen("re-size volume");
+@@ -913,8 +863,9 @@
+                       break;
+               }
+-              pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1,
+-                             desc->vol->usable_leb_size);
++              tmp = req.bytes;
++              pebs = !!do_div(tmp, desc->vol->usable_leb_size);
++              pebs += tmp;
+               mutex_lock(&ubi->volumes_mutex);
+               err = ubi_resize_volume(desc, pebs);
+@@ -958,8 +909,8 @@
+       return err;
+ }
+-static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
+-                          unsigned long arg)
++static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
++                         unsigned int cmd, unsigned long arg)
+ {
+       int err = 0;
+       void __user *argp = (void __user *)arg;
+@@ -1035,59 +986,26 @@
+       return err;
+ }
+-#ifdef CONFIG_COMPAT
+-static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+-                                unsigned long arg)
+-{
+-      unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+-
+-      return vol_cdev_ioctl(file, cmd, translated_arg);
+-}
+-
+-static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+-                                unsigned long arg)
+-{
+-      unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+-
+-      return ubi_cdev_ioctl(file, cmd, translated_arg);
+-}
+-
+-static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+-                                 unsigned long arg)
+-{
+-      unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+-
+-      return ctrl_cdev_ioctl(file, cmd, translated_arg);
+-}
+-#else
+-#define vol_cdev_compat_ioctl  NULL
+-#define ubi_cdev_compat_ioctl  NULL
+-#define ctrl_cdev_compat_ioctl NULL
+-#endif
+-
+-/* UBI volume character device operations */
+-const struct file_operations ubi_vol_cdev_operations = {
+-      .owner          = THIS_MODULE,
+-      .open           = vol_cdev_open,
+-      .release        = vol_cdev_release,
+-      .llseek         = vol_cdev_llseek,
+-      .read           = vol_cdev_read,
+-      .write          = vol_cdev_write,
+-      .unlocked_ioctl = vol_cdev_ioctl,
+-      .compat_ioctl   = vol_cdev_compat_ioctl,
++/* UBI control character device operations */
++struct file_operations ubi_ctrl_cdev_operations = {
++      .ioctl = ctrl_cdev_ioctl,
++      .owner = THIS_MODULE,
+ };
+ /* UBI character device operations */
+-const struct file_operations ubi_cdev_operations = {
+-      .owner          = THIS_MODULE,
+-      .llseek         = no_llseek,
+-      .unlocked_ioctl = ubi_cdev_ioctl,
+-      .compat_ioctl   = ubi_cdev_compat_ioctl,
++struct file_operations ubi_cdev_operations = {
++      .owner = THIS_MODULE,
++      .ioctl = ubi_cdev_ioctl,
++      .llseek = no_llseek,
+ };
+-/* UBI control character device operations */
+-const struct file_operations ubi_ctrl_cdev_operations = {
+-      .owner          = THIS_MODULE,
+-      .unlocked_ioctl = ctrl_cdev_ioctl,
+-      .compat_ioctl   = ctrl_cdev_compat_ioctl,
++/* UBI volume character device operations */
++struct file_operations ubi_vol_cdev_operations = {
++      .owner   = THIS_MODULE,
++      .open    = vol_cdev_open,
++      .release = vol_cdev_release,
++      .llseek  = vol_cdev_llseek,
++      .read    = vol_cdev_read,
++      .write   = vol_cdev_write,
++      .ioctl   = vol_cdev_ioctl,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/gluebi.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/gluebi.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/gluebi.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/gluebi.c     2009-05-10 23:48:28.000000000 +0200
+@@ -28,7 +28,7 @@
+  * eraseblock size is equivalent to the logical eraseblock size of the volume.
+  */
+-#include <linux/math64.h>
++#include <asm/div64.h>
+ #include "ubi.h"
+ /**
+@@ -109,6 +109,7 @@
+       int err = 0, lnum, offs, total_read;
+       struct ubi_volume *vol;
+       struct ubi_device *ubi;
++      uint64_t tmp = from;
+       dbg_gen("read %zd bytes from offset %lld", len, from);
+@@ -118,7 +119,9 @@
+       vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+       ubi = vol->ubi;
+-      lnum = div_u64_rem(from, mtd->erasesize, &offs);
++      offs = do_div(tmp, mtd->erasesize);
++      lnum = tmp;
++
+       total_read = len;
+       while (total_read) {
+               size_t to_read = mtd->erasesize - offs;
+@@ -157,6 +160,7 @@
+       int err = 0, lnum, offs, total_written;
+       struct ubi_volume *vol;
+       struct ubi_device *ubi;
++      uint64_t tmp = to;
+       dbg_gen("write %zd bytes to offset %lld", len, to);
+@@ -169,7 +173,8 @@
+       if (ubi->ro_mode)
+               return -EROFS;
+-      lnum = div_u64_rem(to, mtd->erasesize, &offs);
++      offs = do_div(tmp, mtd->erasesize);
++      lnum = tmp;
+       if (len % mtd->writesize || offs % mtd->writesize)
+               return -EINVAL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/Kconfig.debug linux-2.6.29-rc3.owrt/drivers/mtd/ubi/Kconfig.debug
+--- linux-2.6.29.owrt/drivers/mtd/ubi/Kconfig.debug    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/Kconfig.debug        2009-05-10 23:48:28.000000000 +0200
+@@ -33,6 +33,16 @@
+         This option switches the background thread off by default. The thread
+         may be also be enabled/disabled via UBI sysfs.
++config MTD_UBI_DEBUG_USERSPACE_IO
++      bool "Direct user-space write/erase support"
++      default n
++      depends on MTD_UBI_DEBUG
++      help
++        By default, users cannot directly write and erase individual
++        eraseblocks of dynamic volumes, and have to use update operation
++        instead. This option enables this capability - it is very useful for
++        debugging and testing.
++
+ config MTD_UBI_DEBUG_EMULATE_BITFLIPS
+       bool "Emulate flash bit-flips"
+       depends on MTD_UBI_DEBUG
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/scan.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/scan.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/scan.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/scan.c       2009-05-10 23:48:28.000000000 +0200
+@@ -42,7 +42,7 @@
+ #include <linux/err.h>
+ #include <linux/crc32.h>
+-#include <linux/math64.h>
++#include <asm/div64.h>
+ #include "ubi.h"
+ #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+@@ -904,8 +904,10 @@
+       dbg_msg("scanning is finished");
+       /* Calculate mean erase counter */
+-      if (si->ec_count)
+-              si->mean_ec = div_u64(si->ec_sum, si->ec_count);
++      if (si->ec_count) {
++              do_div(si->ec_sum, si->ec_count);
++              si->mean_ec = si->ec_sum;
++      }
+       if (si->is_empty)
+               ubi_msg("empty MTD device detected");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/ubi.h linux-2.6.29-rc3.owrt/drivers/mtd/ubi/ubi.h
+--- linux-2.6.29.owrt/drivers/mtd/ubi/ubi.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/ubi.h        2009-05-10 23:48:28.000000000 +0200
+@@ -206,7 +206,6 @@
+  * @upd_marker: %1 if the update marker is set for this volume
+  * @updating: %1 if the volume is being updated
+  * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
+- * @direct_writes: %1 if direct writes are enabled for this volume
+  *
+  * @gluebi_desc: gluebi UBI volume descriptor
+  * @gluebi_refcount: reference count of the gluebi MTD device
+@@ -254,7 +253,6 @@
+       unsigned int upd_marker:1;
+       unsigned int updating:1;
+       unsigned int changing_leb:1;
+-      unsigned int direct_writes:1;
+ #ifdef CONFIG_MTD_UBI_GLUEBI
+       /*
+@@ -306,8 +304,7 @@
+  * @vtbl_size: size of the volume table in bytes
+  * @vtbl: in-RAM volume table copy
+  * @volumes_mutex: protects on-flash volume table and serializes volume
+- *                 changes, like creation, deletion, update, re-size,
+- *                 re-name and set property
++ *                 changes, like creation, deletion, update, re-size and re-name
+  *
+  * @max_ec: current highest erase counter value
+  * @mean_ec: current mean erase counter value
+@@ -452,9 +449,9 @@
+ };
+ extern struct kmem_cache *ubi_wl_entry_slab;
+-extern const struct file_operations ubi_ctrl_cdev_operations;
+-extern const struct file_operations ubi_cdev_operations;
+-extern const struct file_operations ubi_vol_cdev_operations;
++extern struct file_operations ubi_ctrl_cdev_operations;
++extern struct file_operations ubi_cdev_operations;
++extern struct file_operations ubi_vol_cdev_operations;
+ extern struct class *ubi_class;
+ extern struct mutex ubi_devices_mutex;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/upd.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/upd.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/upd.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/upd.c        2009-05-10 23:48:28.000000000 +0200
+@@ -40,7 +40,7 @@
+ #include <linux/err.h>
+ #include <linux/uaccess.h>
+-#include <linux/math64.h>
++#include <asm/div64.h>
+ #include "ubi.h"
+ /**
+@@ -89,6 +89,7 @@
+                              long long bytes)
+ {
+       int err;
++      uint64_t tmp;
+       struct ubi_vtbl_record vtbl_rec;
+       dbg_gen("clear update marker for volume %d", vol->vol_id);
+@@ -100,9 +101,9 @@
+       if (vol->vol_type == UBI_STATIC_VOLUME) {
+               vol->corrupted = 0;
+-              vol->used_bytes = bytes;
+-              vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size,
+-                                          &vol->last_eb_bytes);
++              vol->used_bytes = tmp = bytes;
++              vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size);
++              vol->used_ebs = tmp;
+               if (vol->last_eb_bytes)
+                       vol->used_ebs += 1;
+               else
+@@ -130,6 +131,7 @@
+                    long long bytes)
+ {
+       int i, err;
++      uint64_t tmp;
+       dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+       ubi_assert(!vol->updating && !vol->changing_leb);
+@@ -159,8 +161,9 @@
+       if (!vol->upd_buf)
+               return -ENOMEM;
+-      vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1,
+-                             vol->usable_leb_size);
++      tmp = bytes;
++      vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size);
++      vol->upd_ebs += tmp;
+       vol->upd_bytes = bytes;
+       vol->upd_received = 0;
+       return 0;
+@@ -279,6 +282,7 @@
+ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
+                        const void __user *buf, int count)
+ {
++      uint64_t tmp;
+       int lnum, offs, err = 0, len, to_write = count;
+       dbg_gen("write %d of %lld bytes, %lld already passed",
+@@ -287,7 +291,10 @@
+       if (ubi->ro_mode)
+               return -EROFS;
+-      lnum = div_u64_rem(vol->upd_received,  vol->usable_leb_size, &offs);
++      tmp = vol->upd_received;
++      offs = do_div(tmp, vol->usable_leb_size);
++      lnum = tmp;
++
+       if (vol->upd_received + count > vol->upd_bytes)
+               to_write = count = vol->upd_bytes - vol->upd_received;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/mtd/ubi/vmt.c linux-2.6.29-rc3.owrt/drivers/mtd/ubi/vmt.c
+--- linux-2.6.29.owrt/drivers/mtd/ubi/vmt.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/mtd/ubi/vmt.c        2009-05-10 23:48:28.000000000 +0200
+@@ -24,7 +24,7 @@
+  */
+ #include <linux/err.h>
+-#include <linux/math64.h>
++#include <asm/div64.h>
+ #include "ubi.h"
+ #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+@@ -205,6 +205,7 @@
+       int i, err, vol_id = req->vol_id, do_free = 1;
+       struct ubi_volume *vol;
+       struct ubi_vtbl_record vtbl_rec;
++      uint64_t bytes;
+       dev_t dev;
+       if (ubi->ro_mode)
+@@ -254,8 +255,10 @@
+       /* Calculate how many eraseblocks are requested */
+       vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
+-      vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1,
+-                                    vol->usable_leb_size);
++      bytes = req->bytes;
++      if (do_div(bytes, vol->usable_leb_size))
++              vol->reserved_pebs = 1;
++      vol->reserved_pebs += bytes;
+       /* Reserve physical eraseblocks */
+       if (vol->reserved_pebs > ubi->avail_pebs) {
+@@ -298,10 +301,10 @@
+               vol->used_bytes =
+                       (long long)vol->used_ebs * vol->usable_leb_size;
+       } else {
+-              vol->used_ebs = div_u64_rem(vol->used_bytes,
+-                                          vol->usable_leb_size,
+-                                          &vol->last_eb_bytes);
+-              if (vol->last_eb_bytes != 0)
++              bytes = vol->used_bytes;
++              vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size);
++              vol->used_ebs = bytes;
++              if (vol->last_eb_bytes)
+                       vol->used_ebs += 1;
+               else
+                       vol->last_eb_bytes = vol->usable_leb_size;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/3c505.c linux-2.6.29-rc3.owrt/drivers/net/3c505.c
+--- linux-2.6.29.owrt/drivers/net/3c505.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/3c505.c  2009-05-10 23:48:28.000000000 +0200
+@@ -493,27 +493,21 @@
+       }
+       /* read the data */
+       spin_lock_irqsave(&adapter->lock, flags);
+-      for (i = 0; i < MAX_PCB_DATA; i++) {
+-              for (j = 0; j < 20000; j++) {
+-                      stat = get_status(dev->base_addr);
+-                      if (stat & ACRF)
+-                              break;
+-              }
+-              pcb->data.raw[i] = inb_command(dev->base_addr);
+-              if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000)
+-                      break;
+-      }
++      i = 0;
++      do {
++              j = 0;
++              while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && j++ < 20000);
++              pcb->data.raw[i++] = inb_command(dev->base_addr);
++              if (i > MAX_PCB_DATA)
++                      INVALID_PCB_MSG(i);
++      } while ((stat & ASF_PCB_MASK) != ASF_PCB_END && j < 20000);
+       spin_unlock_irqrestore(&adapter->lock, flags);
+-      if (i >= MAX_PCB_DATA) {
+-              INVALID_PCB_MSG(i);
+-              return false;
+-      }
+       if (j >= 20000) {
+               TIMEOUT_MSG(__LINE__);
+               return false;
+       }
+-      /* the last "data" byte was really the length! */
+-      total_length = pcb->data.raw[i];
++      /* woops, the last "data" byte was really the length! */
++      total_length = pcb->data.raw[--i];
+       /* safety check total length vs data length */
+       if (total_length != (pcb->length + 2)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/3c509.c linux-2.6.29-rc3.owrt/drivers/net/3c509.c
+--- linux-2.6.29.owrt/drivers/net/3c509.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/3c509.c  2009-05-10 23:48:28.000000000 +0200
+@@ -1475,7 +1475,6 @@
+       spin_lock_irqsave(&lp->lock, flags);
+       outw(PowerUp, ioaddr + EL3_CMD);
+-      EL3WINDOW(0);
+       el3_up(dev);
+       if (netif_running(dev))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/arm/etherh.c linux-2.6.29-rc3.owrt/drivers/net/arm/etherh.c
+--- linux-2.6.29.owrt/drivers/net/arm/etherh.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/arm/etherh.c     2009-05-10 23:48:28.000000000 +0200
+@@ -641,15 +641,15 @@
+       .ndo_open               = etherh_open,
+       .ndo_stop               = etherh_close,
+       .ndo_set_config         = etherh_set_config,
+-      .ndo_start_xmit         = __ei_start_xmit,
+-      .ndo_tx_timeout         = __ei_tx_timeout,
+-      .ndo_get_stats          = __ei_get_stats,
+-      .ndo_set_multicast_list = __ei_set_multicast_list,
++      .ndo_start_xmit         = ei_start_xmit,
++      .ndo_tx_timeout         = ei_tx_timeout,
++      .ndo_get_stats          = ei_get_stats,
++      .ndo_set_multicast_list = ei_set_multicast_list,
+       .ndo_validate_addr      = eth_validate_addr,
+-      .ndo_set_mac_address    = eth_mac_addr,
++      .ndo_set_mac_address    = eth_set_mac_addr,
+       .ndo_change_mtu         = eth_change_mtu,
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+-      .ndo_poll_controller    = __ei_poll,
++      .ndo_poll_controller    = ei_poll,
+ #endif
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/arm/ks8695net.c linux-2.6.29-rc3.owrt/drivers/net/arm/ks8695net.c
+--- linux-2.6.29.owrt/drivers/net/arm/ks8695net.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/arm/ks8695net.c  2009-05-10 23:48:28.000000000 +0200
+@@ -560,7 +560,7 @@
+               msleep(1);
+       }
+-      if (reset_timeout < 0) {
++      if (reset_timeout == 0) {
+               dev_crit(ksp->dev,
+                        "Timeout waiting for DMA engines to reset\n");
+               /* And blithely carry on */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/arm/Makefile linux-2.6.29-rc3.owrt/drivers/net/arm/Makefile
+--- linux-2.6.29.owrt/drivers/net/arm/Makefile 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/arm/Makefile     2009-05-10 23:48:28.000000000 +0200
+@@ -4,7 +4,7 @@
+ #
+ obj-$(CONFIG_ARM_AM79C961A)   += am79c961a.o
+-obj-$(CONFIG_ARM_ETHERH)      += etherh.o
++obj-$(CONFIG_ARM_ETHERH)      += etherh.o ../8390.o
+ obj-$(CONFIG_ARM_ETHER3)      += ether3.o
+ obj-$(CONFIG_ARM_ETHER1)      += ether1.o
+ obj-$(CONFIG_ARM_AT91_ETHER)  += at91_ether.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/atl1c_ethtool.c linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_ethtool.c
+--- linux-2.6.29.owrt/drivers/net/atl1c/atl1c_ethtool.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_ethtool.c    1970-01-01 01:00:00.000000000 +0100
+@@ -1,317 +0,0 @@
+-/*
+- * Copyright(c) 2009 - 2009 Atheros Corporation. All rights reserved.
+- *
+- * Derived from Intel e1000 driver
+- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- *
+- */
+-
+-#include <linux/netdevice.h>
+-#include <linux/ethtool.h>
+-
+-#include "atl1c.h"
+-
+-static int atl1c_get_settings(struct net_device *netdev,
+-                            struct ethtool_cmd *ecmd)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-
+-      ecmd->supported = (SUPPORTED_10baseT_Half  |
+-                         SUPPORTED_10baseT_Full  |
+-                         SUPPORTED_100baseT_Half |
+-                         SUPPORTED_100baseT_Full |
+-                         SUPPORTED_Autoneg       |
+-                         SUPPORTED_TP);
+-      if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M)
+-              ecmd->supported |= SUPPORTED_1000baseT_Full;
+-
+-      ecmd->advertising = ADVERTISED_TP;
+-
+-      ecmd->advertising |= hw->autoneg_advertised;
+-
+-      ecmd->port = PORT_TP;
+-      ecmd->phy_address = 0;
+-      ecmd->transceiver = XCVR_INTERNAL;
+-
+-      if (adapter->link_speed != SPEED_0) {
+-              ecmd->speed = adapter->link_speed;
+-              if (adapter->link_duplex == FULL_DUPLEX)
+-                      ecmd->duplex = DUPLEX_FULL;
+-              else
+-                      ecmd->duplex = DUPLEX_HALF;
+-      } else {
+-              ecmd->speed = -1;
+-              ecmd->duplex = -1;
+-      }
+-
+-      ecmd->autoneg = AUTONEG_ENABLE;
+-      return 0;
+-}
+-
+-static int atl1c_set_settings(struct net_device *netdev,
+-                            struct ethtool_cmd *ecmd)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u16  autoneg_advertised;
+-
+-      while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+-              msleep(1);
+-
+-      if (ecmd->autoneg == AUTONEG_ENABLE) {
+-              autoneg_advertised = ADVERTISED_Autoneg;
+-      } else {
+-              if (ecmd->speed == SPEED_1000) {
+-                      if (ecmd->duplex != DUPLEX_FULL) {
+-                              if (netif_msg_link(adapter))
+-                                      dev_warn(&adapter->pdev->dev,
+-                                              "1000M half is invalid\n");
+-                              clear_bit(__AT_RESETTING, &adapter->flags);
+-                              return -EINVAL;
+-                      }
+-                      autoneg_advertised = ADVERTISED_1000baseT_Full;
+-              } else if (ecmd->speed == SPEED_100) {
+-                      if (ecmd->duplex == DUPLEX_FULL)
+-                              autoneg_advertised = ADVERTISED_100baseT_Full;
+-                      else
+-                              autoneg_advertised = ADVERTISED_100baseT_Half;
+-              } else {
+-                      if (ecmd->duplex == DUPLEX_FULL)
+-                              autoneg_advertised = ADVERTISED_10baseT_Full;
+-                      else
+-                              autoneg_advertised = ADVERTISED_10baseT_Half;
+-              }
+-      }
+-
+-      if (hw->autoneg_advertised != autoneg_advertised) {
+-              hw->autoneg_advertised = autoneg_advertised;
+-              if (atl1c_restart_autoneg(hw) != 0) {
+-                      if (netif_msg_link(adapter))
+-                              dev_warn(&adapter->pdev->dev,
+-                                      "ethtool speed/duplex setting failed\n");
+-                      clear_bit(__AT_RESETTING, &adapter->flags);
+-                      return -EINVAL;
+-              }
+-      }
+-      clear_bit(__AT_RESETTING, &adapter->flags);
+-      return 0;
+-}
+-
+-static u32 atl1c_get_tx_csum(struct net_device *netdev)
+-{
+-      return (netdev->features & NETIF_F_HW_CSUM) != 0;
+-}
+-
+-static u32 atl1c_get_msglevel(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      return adapter->msg_enable;
+-}
+-
+-static void atl1c_set_msglevel(struct net_device *netdev, u32 data)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      adapter->msg_enable = data;
+-}
+-
+-static int atl1c_get_regs_len(struct net_device *netdev)
+-{
+-      return AT_REGS_LEN;
+-}
+-
+-static void atl1c_get_regs(struct net_device *netdev,
+-                         struct ethtool_regs *regs, void *p)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 *regs_buff = p;
+-      u16 phy_data;
+-
+-      memset(p, 0, AT_REGS_LEN);
+-
+-      regs->version = 0;
+-      AT_READ_REG(hw, REG_VPD_CAP,              p++);
+-      AT_READ_REG(hw, REG_PM_CTRL,              p++);
+-      AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL,  p++);
+-      AT_READ_REG(hw, REG_TWSI_CTRL,            p++);
+-      AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL,   p++);
+-      AT_READ_REG(hw, REG_MASTER_CTRL,          p++);
+-      AT_READ_REG(hw, REG_MANUAL_TIMER_INIT,    p++);
+-      AT_READ_REG(hw, REG_IRQ_MODRT_TIMER_INIT, p++);
+-      AT_READ_REG(hw, REG_GPHY_CTRL,            p++);
+-      AT_READ_REG(hw, REG_LINK_CTRL,            p++);
+-      AT_READ_REG(hw, REG_IDLE_STATUS,          p++);
+-      AT_READ_REG(hw, REG_MDIO_CTRL,            p++);
+-      AT_READ_REG(hw, REG_SERDES_LOCK,          p++);
+-      AT_READ_REG(hw, REG_MAC_CTRL,             p++);
+-      AT_READ_REG(hw, REG_MAC_IPG_IFG,          p++);
+-      AT_READ_REG(hw, REG_MAC_STA_ADDR,         p++);
+-      AT_READ_REG(hw, REG_MAC_STA_ADDR+4,       p++);
+-      AT_READ_REG(hw, REG_RX_HASH_TABLE,        p++);
+-      AT_READ_REG(hw, REG_RX_HASH_TABLE+4,      p++);
+-      AT_READ_REG(hw, REG_RXQ_CTRL,             p++);
+-      AT_READ_REG(hw, REG_TXQ_CTRL,             p++);
+-      AT_READ_REG(hw, REG_MTU,                  p++);
+-      AT_READ_REG(hw, REG_WOL_CTRL,             p++);
+-
+-      atl1c_read_phy_reg(hw, MII_BMCR, &phy_data);
+-      regs_buff[73] = (u32) phy_data;
+-      atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+-      regs_buff[74] = (u32) phy_data;
+-}
+-
+-static int atl1c_get_eeprom_len(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      if (atl1c_check_eeprom_exist(&adapter->hw))
+-              return AT_EEPROM_LEN;
+-      else
+-              return 0;
+-}
+-
+-static int atl1c_get_eeprom(struct net_device *netdev,
+-              struct ethtool_eeprom *eeprom, u8 *bytes)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 *eeprom_buff;
+-      int first_dword, last_dword;
+-      int ret_val = 0;
+-      int i;
+-
+-      if (eeprom->len == 0)
+-              return -EINVAL;
+-
+-      if (!atl1c_check_eeprom_exist(hw)) /* not exist */
+-              return -EINVAL;
+-
+-      eeprom->magic = adapter->pdev->vendor |
+-                      (adapter->pdev->device << 16);
+-
+-      first_dword = eeprom->offset >> 2;
+-      last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+-
+-      eeprom_buff = kmalloc(sizeof(u32) *
+-                      (last_dword - first_dword + 1), GFP_KERNEL);
+-      if (eeprom_buff == NULL)
+-              return -ENOMEM;
+-
+-      for (i = first_dword; i < last_dword; i++) {
+-              if (!atl1c_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) {
+-                      kfree(eeprom_buff);
+-                      return -EIO;
+-              }
+-      }
+-
+-      memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
+-                      eeprom->len);
+-      kfree(eeprom_buff);
+-
+-      return ret_val;
+-      return 0;
+-}
+-
+-static void atl1c_get_drvinfo(struct net_device *netdev,
+-              struct ethtool_drvinfo *drvinfo)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      strncpy(drvinfo->driver,  atl1c_driver_name, sizeof(drvinfo->driver));
+-      strncpy(drvinfo->version, atl1c_driver_version,
+-              sizeof(drvinfo->version));
+-      strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+-      strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+-              sizeof(drvinfo->bus_info));
+-      drvinfo->n_stats = 0;
+-      drvinfo->testinfo_len = 0;
+-      drvinfo->regdump_len = atl1c_get_regs_len(netdev);
+-      drvinfo->eedump_len = atl1c_get_eeprom_len(netdev);
+-}
+-
+-static void atl1c_get_wol(struct net_device *netdev,
+-                        struct ethtool_wolinfo *wol)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      wol->supported = WAKE_MAGIC | WAKE_PHY;
+-      wol->wolopts = 0;
+-
+-      if (adapter->wol & AT_WUFC_EX)
+-              wol->wolopts |= WAKE_UCAST;
+-      if (adapter->wol & AT_WUFC_MC)
+-              wol->wolopts |= WAKE_MCAST;
+-      if (adapter->wol & AT_WUFC_BC)
+-              wol->wolopts |= WAKE_BCAST;
+-      if (adapter->wol & AT_WUFC_MAG)
+-              wol->wolopts |= WAKE_MAGIC;
+-      if (adapter->wol & AT_WUFC_LNKC)
+-              wol->wolopts |= WAKE_PHY;
+-
+-      return;
+-}
+-
+-static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
+-                          WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+-              return -EOPNOTSUPP;
+-      /* these settings will always override what we currently have */
+-      adapter->wol = 0;
+-
+-      if (wol->wolopts & WAKE_MAGIC)
+-              adapter->wol |= AT_WUFC_MAG;
+-      if (wol->wolopts & WAKE_PHY)
+-              adapter->wol |= AT_WUFC_LNKC;
+-
+-      return 0;
+-}
+-
+-static int atl1c_nway_reset(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      if (netif_running(netdev))
+-              atl1c_reinit_locked(adapter);
+-      return 0;
+-}
+-
+-static struct ethtool_ops atl1c_ethtool_ops = {
+-      .get_settings           = atl1c_get_settings,
+-      .set_settings           = atl1c_set_settings,
+-      .get_drvinfo            = atl1c_get_drvinfo,
+-      .get_regs_len           = atl1c_get_regs_len,
+-      .get_regs               = atl1c_get_regs,
+-      .get_wol                = atl1c_get_wol,
+-      .set_wol                = atl1c_set_wol,
+-      .get_msglevel           = atl1c_get_msglevel,
+-      .set_msglevel           = atl1c_set_msglevel,
+-      .nway_reset             = atl1c_nway_reset,
+-      .get_link               = ethtool_op_get_link,
+-      .get_eeprom_len         = atl1c_get_eeprom_len,
+-      .get_eeprom             = atl1c_get_eeprom,
+-      .get_tx_csum            = atl1c_get_tx_csum,
+-      .get_sg                 = ethtool_op_get_sg,
+-      .set_sg                 = ethtool_op_set_sg,
+-};
+-
+-void atl1c_set_ethtool_ops(struct net_device *netdev)
+-{
+-      SET_ETHTOOL_OPS(netdev, &atl1c_ethtool_ops);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/atl1c.h linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c.h
+--- linux-2.6.29.owrt/drivers/net/atl1c/atl1c.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c.h    1970-01-01 01:00:00.000000000 +0100
+@@ -1,606 +0,0 @@
+-/*
+- * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+- *
+- * Derived from Intel e1000 driver
+- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- */
+-
+-#ifndef _ATL1C_H_
+-#define _ATL1C_H_
+-
+-#include <linux/version.h>
+-#include <linux/init.h>
+-#include <linux/types.h>
+-#include <linux/errno.h>
+-#include <linux/module.h>
+-#include <linux/pci.h>
+-#include <linux/netdevice.h>
+-#include <linux/etherdevice.h>
+-#include <linux/skbuff.h>
+-#include <linux/ioport.h>
+-#include <linux/slab.h>
+-#include <linux/list.h>
+-#include <linux/delay.h>
+-#include <linux/sched.h>
+-#include <linux/in.h>
+-#include <linux/ip.h>
+-#include <linux/ipv6.h>
+-#include <linux/udp.h>
+-#include <linux/mii.h>
+-#include <linux/io.h>
+-#include <linux/vmalloc.h>
+-#include <linux/pagemap.h>
+-#include <linux/tcp.h>
+-#include <linux/mii.h>
+-#include <linux/ethtool.h>
+-#include <linux/if_vlan.h>
+-#include <linux/workqueue.h>
+-#include <net/checksum.h>
+-#include <net/ip6_checksum.h>
+-
+-#include "atl1c_hw.h"
+-
+-/* Wake Up Filter Control */
+-#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+-#define AT_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
+-#define AT_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
+-#define AT_WUFC_MC   0x00000008 /* Multicast Wakeup Enable */
+-#define AT_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+-
+-#define AT_VLAN_TO_TAG(_vlan, _tag)      \
+-      _tag =  ((((_vlan) >> 8) & 0xFF)  |\
+-               (((_vlan) & 0xFF) << 8))
+-
+-#define AT_TAG_TO_VLAN(_tag, _vlan)    \
+-      _vlan = ((((_tag) >> 8) & 0xFF) |\
+-              (((_tag) & 0xFF) << 8))
+-
+-#define SPEED_0                  0xffff
+-#define HALF_DUPLEX        1
+-#define FULL_DUPLEX        2
+-
+-#define AT_RX_BUF_SIZE                (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)
+-#define MAX_JUMBO_FRAME_SIZE  (9*1024)
+-#define MAX_TX_OFFLOAD_THRESH (9*1024)
+-
+-#define AT_MAX_RECEIVE_QUEUE    4
+-#define AT_DEF_RECEIVE_QUEUE  1
+-#define AT_MAX_TRANSMIT_QUEUE 2
+-
+-#define AT_DMA_HI_ADDR_MASK     0xffffffff00000000ULL
+-#define AT_DMA_LO_ADDR_MASK     0x00000000ffffffffULL
+-
+-#define AT_TX_WATCHDOG  (5 * HZ)
+-#define AT_MAX_INT_WORK               5
+-#define AT_TWSI_EEPROM_TIMEOUT        100
+-#define AT_HW_MAX_IDLE_DELAY  10
+-#define AT_SUSPEND_LINK_TIMEOUT 28
+-
+-#define AT_ASPM_L0S_TIMER     6
+-#define AT_ASPM_L1_TIMER      12
+-
+-#define ATL1C_PCIE_L0S_L1_DISABLE     0x01
+-#define ATL1C_PCIE_PHY_RESET          0x02
+-
+-#define ATL1C_ASPM_L0s_ENABLE         0x0001
+-#define ATL1C_ASPM_L1_ENABLE          0x0002
+-
+-#define AT_REGS_LEN   (75 * sizeof(u32))
+-#define AT_EEPROM_LEN         512
+-
+-#define ATL1C_GET_DESC(R, i, type)    (&(((type *)((R)->desc))[i]))
+-#define ATL1C_RFD_DESC(R, i)  ATL1C_GET_DESC(R, i, struct atl1c_rx_free_desc)
+-#define ATL1C_TPD_DESC(R, i)  ATL1C_GET_DESC(R, i, struct atl1c_tpd_desc)
+-#define ATL1C_RRD_DESC(R, i)  ATL1C_GET_DESC(R, i, struct atl1c_recv_ret_status)
+-
+-/* tpd word 1 bit 0:7 General Checksum task offload */
+-#define TPD_L4HDR_OFFSET_MASK 0x00FF
+-#define TPD_L4HDR_OFFSET_SHIFT        0
+-
+-/* tpd word 1 bit 0:7 Large Send task offload (IPv4/IPV6) */
+-#define TPD_TCPHDR_OFFSET_MASK        0x00FF
+-#define TPD_TCPHDR_OFFSET_SHIFT       0
+-
+-/* tpd word 1 bit 0:7 Custom Checksum task offload */
+-#define TPD_PLOADOFFSET_MASK  0x00FF
+-#define TPD_PLOADOFFSET_SHIFT 0
+-
+-/* tpd word 1 bit 8:17 */
+-#define TPD_CCSUM_EN_MASK     0x0001
+-#define TPD_CCSUM_EN_SHIFT    8
+-#define TPD_IP_CSUM_MASK      0x0001
+-#define TPD_IP_CSUM_SHIFT     9
+-#define TPD_TCP_CSUM_MASK     0x0001
+-#define TPD_TCP_CSUM_SHIFT    10
+-#define TPD_UDP_CSUM_MASK     0x0001
+-#define TPD_UDP_CSUM_SHIFT    11
+-#define TPD_LSO_EN_MASK               0x0001  /* TCP Large Send Offload */
+-#define TPD_LSO_EN_SHIFT      12
+-#define TPD_LSO_VER_MASK      0x0001
+-#define TPD_LSO_VER_SHIFT     13      /* 0 : ipv4; 1 : ipv4/ipv6 */
+-#define TPD_CON_VTAG_MASK     0x0001
+-#define TPD_CON_VTAG_SHIFT    14
+-#define TPD_INS_VTAG_MASK     0x0001
+-#define TPD_INS_VTAG_SHIFT    15
+-#define TPD_IPV4_PACKET_MASK  0x0001  /* valid when LSO VER  is 1 */
+-#define TPD_IPV4_PACKET_SHIFT 16
+-#define TPD_ETH_TYPE_MASK     0x0001
+-#define TPD_ETH_TYPE_SHIFT    17      /* 0 : 802.3 frame; 1 : Ethernet */
+-
+-/* tpd word 18:25 Custom Checksum task offload */
+-#define TPD_CCSUM_OFFSET_MASK 0x00FF
+-#define TPD_CCSUM_OFFSET_SHIFT        18
+-#define TPD_CCSUM_EPAD_MASK   0x0001
+-#define TPD_CCSUM_EPAD_SHIFT  30
+-
+-/* tpd word 18:30 Large Send task offload (IPv4/IPV6) */
+-#define TPD_MSS_MASK            0x1FFF
+-#define TPD_MSS_SHIFT         18
+-
+-#define TPD_EOP_MASK          0x0001
+-#define TPD_EOP_SHIFT         31
+-
+-struct atl1c_tpd_desc {
+-      __le16  buffer_len; /* include 4-byte CRC */
+-      __le16  vlan_tag;
+-      __le32  word1;
+-      __le64  buffer_addr;
+-};
+-
+-struct atl1c_tpd_ext_desc {
+-      u32 reservd_0;
+-      __le32 word1;
+-      __le32 pkt_len;
+-      u32 reservd_1;
+-};
+-/* rrs word 0 bit 0:31 */
+-#define RRS_RX_CSUM_MASK      0xFFFF
+-#define RRS_RX_CSUM_SHIFT     0
+-#define RRS_RX_RFD_CNT_MASK   0x000F
+-#define RRS_RX_RFD_CNT_SHIFT  16
+-#define RRS_RX_RFD_INDEX_MASK 0x0FFF
+-#define RRS_RX_RFD_INDEX_SHIFT        20
+-
+-/* rrs flag bit 0:16 */
+-#define RRS_HEAD_LEN_MASK     0x00FF
+-#define RRS_HEAD_LEN_SHIFT    0
+-#define RRS_HDS_TYPE_MASK     0x0003
+-#define RRS_HDS_TYPE_SHIFT    8
+-#define RRS_CPU_NUM_MASK      0x0003
+-#define       RRS_CPU_NUM_SHIFT       10
+-#define RRS_HASH_FLG_MASK     0x000F
+-#define RRS_HASH_FLG_SHIFT    12
+-
+-#define RRS_HDS_TYPE_HEAD     1
+-#define RRS_HDS_TYPE_DATA     2
+-
+-#define RRS_IS_NO_HDS_TYPE(flag) \
+-      (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+-
+-#define RRS_IS_HDS_HEAD(flag) \
+-      (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+-                      RRS_HDS_TYPE_HEAD)
+-
+-#define RRS_IS_HDS_DATA(flag) \
+-      (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+-                      RRS_HDS_TYPE_DATA)
+-
+-/* rrs word 3 bit 0:31 */
+-#define RRS_PKT_SIZE_MASK     0x3FFF
+-#define RRS_PKT_SIZE_SHIFT    0
+-#define RRS_ERR_L4_CSUM_MASK  0x0001
+-#define RRS_ERR_L4_CSUM_SHIFT 14
+-#define RRS_ERR_IP_CSUM_MASK  0x0001
+-#define RRS_ERR_IP_CSUM_SHIFT 15
+-#define RRS_VLAN_INS_MASK     0x0001
+-#define RRS_VLAN_INS_SHIFT    16
+-#define RRS_PROT_ID_MASK      0x0007
+-#define RRS_PROT_ID_SHIFT     17
+-#define RRS_RX_ERR_SUM_MASK   0x0001
+-#define RRS_RX_ERR_SUM_SHIFT  20
+-#define RRS_RX_ERR_CRC_MASK   0x0001
+-#define RRS_RX_ERR_CRC_SHIFT  21
+-#define RRS_RX_ERR_FAE_MASK   0x0001
+-#define RRS_RX_ERR_FAE_SHIFT  22
+-#define RRS_RX_ERR_TRUNC_MASK 0x0001
+-#define RRS_RX_ERR_TRUNC_SHIFT        23
+-#define RRS_RX_ERR_RUNC_MASK  0x0001
+-#define RRS_RX_ERR_RUNC_SHIFT 24
+-#define RRS_RX_ERR_ICMP_MASK  0x0001
+-#define RRS_RX_ERR_ICMP_SHIFT 25
+-#define RRS_PACKET_BCAST_MASK 0x0001
+-#define RRS_PACKET_BCAST_SHIFT        26
+-#define RRS_PACKET_MCAST_MASK 0x0001
+-#define RRS_PACKET_MCAST_SHIFT        27
+-#define RRS_PACKET_TYPE_MASK  0x0001
+-#define RRS_PACKET_TYPE_SHIFT 28
+-#define RRS_FIFO_FULL_MASK    0x0001
+-#define RRS_FIFO_FULL_SHIFT   29
+-#define RRS_802_3_LEN_ERR_MASK        0x0001
+-#define RRS_802_3_LEN_ERR_SHIFT 30
+-#define RRS_RXD_UPDATED_MASK  0x0001
+-#define RRS_RXD_UPDATED_SHIFT 31
+-
+-#define RRS_ERR_L4_CSUM         0x00004000
+-#define RRS_ERR_IP_CSUM         0x00008000
+-#define RRS_VLAN_INS            0x00010000
+-#define RRS_RX_ERR_SUM          0x00100000
+-#define RRS_RX_ERR_CRC          0x00200000
+-#define RRS_802_3_LEN_ERR     0x40000000
+-#define RRS_RXD_UPDATED               0x80000000
+-
+-#define RRS_PACKET_TYPE_802_3         1
+-#define RRS_PACKET_TYPE_ETH   0
+-#define RRS_PACKET_IS_ETH(word) \
+-      (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+-                      RRS_PACKET_TYPE_ETH)
+-#define RRS_RXD_IS_VALID(word) \
+-      ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
+-
+-#define RRS_PACKET_PROT_IS_IPV4_ONLY(word) \
+-      ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 1)
+-#define RRS_PACKET_PROT_IS_IPV6_ONLY(word) \
+-      ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 6)
+-
+-struct atl1c_recv_ret_status {
+-      __le32  word0;
+-      __le32  rss_hash;
+-      __le16  vlan_tag;
+-      __le16  flag;
+-      __le32  word3;
+-};
+-
+-/* RFD desciptor */
+-struct atl1c_rx_free_desc {
+-      __le64  buffer_addr;
+-};
+-
+-/* DMA Order Settings */
+-enum atl1c_dma_order {
+-      atl1c_dma_ord_in = 1,
+-      atl1c_dma_ord_enh = 2,
+-      atl1c_dma_ord_out = 4
+-};
+-
+-enum atl1c_dma_rcb {
+-      atl1c_rcb_64 = 0,
+-      atl1c_rcb_128 = 1
+-};
+-
+-enum atl1c_mac_speed {
+-      atl1c_mac_speed_0 = 0,
+-      atl1c_mac_speed_10_100 = 1,
+-      atl1c_mac_speed_1000 = 2
+-};
+-
+-enum atl1c_dma_req_block {
+-      atl1c_dma_req_128 = 0,
+-      atl1c_dma_req_256 = 1,
+-      atl1c_dma_req_512 = 2,
+-      atl1c_dma_req_1024 = 3,
+-      atl1c_dma_req_2048 = 4,
+-      atl1c_dma_req_4096 = 5
+-};
+-
+-enum atl1c_rss_mode {
+-      atl1c_rss_mode_disable = 0,
+-      atl1c_rss_sig_que = 1,
+-      atl1c_rss_mul_que_sig_int = 2,
+-      atl1c_rss_mul_que_mul_int = 4,
+-};
+-
+-enum atl1c_rss_type {
+-      atl1c_rss_disable = 0,
+-      atl1c_rss_ipv4 = 1,
+-      atl1c_rss_ipv4_tcp = 2,
+-      atl1c_rss_ipv6 = 4,
+-      atl1c_rss_ipv6_tcp = 8
+-};
+-
+-enum atl1c_nic_type {
+-      athr_l1c = 0,
+-      athr_l2c = 1,
+-};
+-
+-enum atl1c_trans_queue {
+-      atl1c_trans_normal = 0,
+-      atl1c_trans_high = 1
+-};
+-
+-struct atl1c_hw_stats {
+-      /* rx */
+-      unsigned long rx_ok;            /* The number of good packet received. */
+-      unsigned long rx_bcast;         /* The number of good broadcast packet received. */
+-      unsigned long rx_mcast;         /* The number of good multicast packet received. */
+-      unsigned long rx_pause;         /* The number of Pause packet received. */
+-      unsigned long rx_ctrl;          /* The number of Control packet received other than Pause frame. */
+-      unsigned long rx_fcs_err;       /* The number of packets with bad FCS. */
+-      unsigned long rx_len_err;       /* The number of packets with mismatch of length field and actual size. */
+-      unsigned long rx_byte_cnt;      /* The number of bytes of good packet received. FCS is NOT included. */
+-      unsigned long rx_runt;          /* The number of packets received that are less than 64 byte long and with good FCS. */
+-      unsigned long rx_frag;          /* The number of packets received that are less than 64 byte long and with bad FCS. */
+-      unsigned long rx_sz_64;         /* The number of good and bad packets received that are 64 byte long. */
+-      unsigned long rx_sz_65_127;     /* The number of good and bad packets received that are between 65 and 127-byte long. */
+-      unsigned long rx_sz_128_255;    /* The number of good and bad packets received that are between 128 and 255-byte long. */
+-      unsigned long rx_sz_256_511;    /* The number of good and bad packets received that are between 256 and 511-byte long. */
+-      unsigned long rx_sz_512_1023;   /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+-      unsigned long rx_sz_1024_1518;  /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+-      unsigned long rx_sz_1519_max;   /* The number of good and bad packets received that are between 1519-byte and MTU. */
+-      unsigned long rx_sz_ov;         /* The number of good and bad packets received that are more than MTU size truncated by Selene. */
+-      unsigned long rx_rxf_ov;        /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+-      unsigned long rx_rrd_ov;        /* The number of frame dropped due to occurrence of RRD overflow. */
+-      unsigned long rx_align_err;     /* Alignment Error */
+-      unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
+-      unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
+-      unsigned long rx_err_addr;      /* The number of packets dropped due to address filtering. */
+-
+-      /* tx */
+-      unsigned long tx_ok;            /* The number of good packet transmitted. */
+-      unsigned long tx_bcast;         /* The number of good broadcast packet transmitted. */
+-      unsigned long tx_mcast;         /* The number of good multicast packet transmitted. */
+-      unsigned long tx_pause;         /* The number of Pause packet transmitted. */
+-      unsigned long tx_exc_defer;     /* The number of packets transmitted with excessive deferral. */
+-      unsigned long tx_ctrl;          /* The number of packets transmitted is a control frame, excluding Pause frame. */
+-      unsigned long tx_defer;         /* The number of packets transmitted that is deferred. */
+-      unsigned long tx_byte_cnt;      /* The number of bytes of data transmitted. FCS is NOT included. */
+-      unsigned long tx_sz_64;         /* The number of good and bad packets transmitted that are 64 byte long. */
+-      unsigned long tx_sz_65_127;     /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+-      unsigned long tx_sz_128_255;    /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+-      unsigned long tx_sz_256_511;    /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+-      unsigned long tx_sz_512_1023;   /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+-      unsigned long tx_sz_1024_1518;  /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+-      unsigned long tx_sz_1519_max;   /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+-      unsigned long tx_1_col;         /* The number of packets subsequently transmitted successfully with a single prior collision. */
+-      unsigned long tx_2_col;         /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+-      unsigned long tx_late_col;      /* The number of packets transmitted with late collisions. */
+-      unsigned long tx_abort_col;     /* The number of transmit packets aborted due to excessive collisions. */
+-      unsigned long tx_underrun;      /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+-      unsigned long tx_rd_eop;        /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+-      unsigned long tx_len_err;       /* The number of transmit packets with length field does NOT match the actual frame size. */
+-      unsigned long tx_trunc;         /* The number of transmit packets truncated due to size exceeding MTU. */
+-      unsigned long tx_bcast_byte;    /* The byte count of broadcast packet transmitted, excluding FCS. */
+-      unsigned long tx_mcast_byte;    /* The byte count of multicast packet transmitted, excluding FCS. */
+-};
+-
+-struct atl1c_hw {
+-      u8 __iomem      *hw_addr;            /* inner register address */
+-      struct atl1c_adapter *adapter;
+-      enum atl1c_nic_type  nic_type;
+-      enum atl1c_dma_order dma_order;
+-      enum atl1c_dma_rcb   rcb_value;
+-      enum atl1c_dma_req_block dmar_block;
+-      enum atl1c_dma_req_block dmaw_block;
+-
+-      u16 device_id;
+-      u16 vendor_id;
+-      u16 subsystem_id;
+-      u16 subsystem_vendor_id;
+-      u8 revision_id;
+-
+-      u32 intr_mask;
+-      u8 dmaw_dly_cnt;
+-      u8 dmar_dly_cnt;
+-
+-      u8 preamble_len;
+-      u16 max_frame_size;
+-      u16 min_frame_size;
+-
+-      enum atl1c_mac_speed mac_speed;
+-      bool mac_duplex;
+-      bool hibernate;
+-      u16 media_type;
+-#define MEDIA_TYPE_AUTO_SENSOR  0
+-#define MEDIA_TYPE_100M_FULL    1
+-#define MEDIA_TYPE_100M_HALF    2
+-#define MEDIA_TYPE_10M_FULL     3
+-#define MEDIA_TYPE_10M_HALF     4
+-
+-      u16 autoneg_advertised;
+-      u16 mii_autoneg_adv_reg;
+-      u16 mii_1000t_ctrl_reg;
+-
+-      u16 tx_imt;     /* TX Interrupt Moderator timer ( 2us resolution) */
+-      u16 rx_imt;     /* RX Interrupt Moderator timer ( 2us resolution) */
+-      u16 ict;        /* Interrupt Clear timer (2us resolution) */
+-      u16 ctrl_flags;
+-#define ATL1C_INTR_CLEAR_ON_READ      0x0001
+-#define ATL1C_INTR_MODRT_ENABLE               0x0002
+-#define ATL1C_CMB_ENABLE              0x0004
+-#define ATL1C_SMB_ENABLE              0x0010
+-#define ATL1C_TXQ_MODE_ENHANCE                0x0020
+-#define ATL1C_RX_IPV6_CHKSUM          0x0040
+-#define ATL1C_ASPM_L0S_SUPPORT                0x0080
+-#define ATL1C_ASPM_L1_SUPPORT         0x0100
+-#define ATL1C_ASPM_CTRL_MON           0x0200
+-#define ATL1C_HIB_DISABLE             0x0400
+-#define ATL1C_LINK_CAP_1000M          0x0800
+-#define ATL1C_FPGA_VERSION            0x8000
+-      u16 cmb_tpd;
+-      u16 cmb_rrd;
+-      u16 cmb_rx_timer; /* 2us resolution */
+-      u16 cmb_tx_timer;
+-      u32 smb_timer;
+-
+-      u16 rrd_thresh; /* Threshold of number of RRD produced to trigger
+-                        interrupt request */
+-      u16 tpd_thresh;
+-      u8 tpd_burst;   /* Number of TPD to prefetch in cache-aligned burst. */
+-      u8 rfd_burst;
+-      enum atl1c_rss_type rss_type;
+-      enum atl1c_rss_mode rss_mode;
+-      u8 rss_hash_bits;
+-      u32 base_cpu;
+-      u32 indirect_tab;
+-      u8 mac_addr[ETH_ALEN];
+-      u8 perm_mac_addr[ETH_ALEN];
+-
+-      bool phy_configured;
+-      bool re_autoneg;
+-      bool emi_ca;
+-};
+-
+-/*
+- * atl1c_ring_header represents a single, contiguous block of DMA space
+- * mapped for the three descriptor rings (tpd, rfd, rrd) and the two
+- * message blocks (cmb, smb) described below
+- */
+-struct atl1c_ring_header {
+-      void *desc;             /* virtual address */
+-      dma_addr_t dma;         /* physical address*/
+-      unsigned int size;      /* length in bytes */
+-};
+-
+-/*
+- * atl1c_buffer is wrapper around a pointer to a socket buffer
+- * so a DMA handle can be stored along with the skb
+- */
+-struct atl1c_buffer {
+-      struct sk_buff *skb;    /* socket buffer */
+-      u16 length;             /* rx buffer length */
+-      u16 state;              /* state of buffer */
+-#define ATL1_BUFFER_FREE      0
+-#define ATL1_BUFFER_BUSY      1
+-      dma_addr_t dma;
+-};
+-
+-/* transimit packet descriptor (tpd) ring */
+-struct atl1c_tpd_ring {
+-      void *desc;             /* descriptor ring virtual address */
+-      dma_addr_t dma;         /* descriptor ring physical address */
+-      u16 size;               /* descriptor ring length in bytes */
+-      u16 count;              /* number of descriptors in the ring */
+-      u16 next_to_use;        /* this is protectd by adapter->tx_lock */
+-      atomic_t next_to_clean;
+-      struct atl1c_buffer *buffer_info;
+-};
+-
+-/* receive free descriptor (rfd) ring */
+-struct atl1c_rfd_ring {
+-      void *desc;             /* descriptor ring virtual address */
+-      dma_addr_t dma;         /* descriptor ring physical address */
+-      u16 size;               /* descriptor ring length in bytes */
+-      u16 count;              /* number of descriptors in the ring */
+-      u16 next_to_use;
+-      u16 next_to_clean;
+-      struct atl1c_buffer *buffer_info;
+-};
+-
+-/* receive return desciptor (rrd) ring */
+-struct atl1c_rrd_ring {
+-      void *desc;             /* descriptor ring virtual address */
+-      dma_addr_t dma;         /* descriptor ring physical address */
+-      u16 size;               /* descriptor ring length in bytes */
+-      u16 count;              /* number of descriptors in the ring */
+-      u16 next_to_use;
+-      u16 next_to_clean;
+-};
+-
+-struct atl1c_cmb {
+-      void *cmb;
+-      dma_addr_t dma;
+-};
+-
+-struct atl1c_smb {
+-      void *smb;
+-      dma_addr_t dma;
+-};
+-
+-/* board specific private data structure */
+-struct atl1c_adapter {
+-      struct net_device   *netdev;
+-      struct pci_dev      *pdev;
+-      struct vlan_group   *vlgrp;
+-      struct napi_struct  napi;
+-      struct atl1c_hw        hw;
+-      struct atl1c_hw_stats  hw_stats;
+-      struct net_device_stats net_stats;
+-      struct mii_if_info  mii;    /* MII interface info */
+-      u16 rx_buffer_len;
+-
+-      unsigned long flags;
+-#define __AT_TESTING        0x0001
+-#define __AT_RESETTING      0x0002
+-#define __AT_DOWN           0x0003
+-      u32 msg_enable;
+-
+-      bool have_msi;
+-      u32 wol;
+-      u16 link_speed;
+-      u16 link_duplex;
+-
+-      spinlock_t mdio_lock;
+-      spinlock_t tx_lock;
+-      atomic_t irq_sem;
+-
+-      struct work_struct reset_task;
+-      struct work_struct link_chg_task;
+-      struct timer_list watchdog_timer;
+-      struct timer_list phy_config_timer;
+-
+-      /* All Descriptor memory */
+-      struct atl1c_ring_header ring_header;
+-      struct atl1c_tpd_ring tpd_ring[AT_MAX_TRANSMIT_QUEUE];
+-      struct atl1c_rfd_ring rfd_ring[AT_MAX_RECEIVE_QUEUE];
+-      struct atl1c_rrd_ring rrd_ring[AT_MAX_RECEIVE_QUEUE];
+-      struct atl1c_cmb cmb;
+-      struct atl1c_smb smb;
+-      int num_rx_queues;
+-      u32 bd_number;     /* board number;*/
+-};
+-
+-#define AT_WRITE_REG(a, reg, value) ( \
+-              writel((value), ((a)->hw_addr + reg)))
+-
+-#define AT_WRITE_FLUSH(a) (\
+-              readl((a)->hw_addr))
+-
+-#define AT_READ_REG(a, reg, pdata) do {                                       \
+-              if (unlikely((a)->hibernate)) {                         \
+-                      readl((a)->hw_addr + reg);                      \
+-                      *(u32 *)pdata = readl((a)->hw_addr + reg);      \
+-              } else {                                                \
+-                      *(u32 *)pdata = readl((a)->hw_addr + reg);      \
+-              }                                                       \
+-      } while (0)
+-
+-#define AT_WRITE_REGB(a, reg, value) (\
+-              writeb((value), ((a)->hw_addr + reg)))
+-
+-#define AT_READ_REGB(a, reg) (\
+-              readb((a)->hw_addr + reg))
+-
+-#define AT_WRITE_REGW(a, reg, value) (\
+-              writew((value), ((a)->hw_addr + reg)))
+-
+-#define AT_READ_REGW(a, reg) (\
+-              readw((a)->hw_addr + reg))
+-
+-#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+-              writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
+-
+-#define AT_READ_REG_ARRAY(a, reg, offset) ( \
+-              readl(((a)->hw_addr + reg) + ((offset) << 2)))
+-
+-extern char atl1c_driver_name[];
+-extern char atl1c_driver_version[];
+-
+-extern int atl1c_up(struct atl1c_adapter *adapter);
+-extern void atl1c_down(struct atl1c_adapter *adapter);
+-extern void atl1c_reinit_locked(struct atl1c_adapter *adapter);
+-extern s32 atl1c_reset_hw(struct atl1c_hw *hw);
+-extern void atl1c_set_ethtool_ops(struct net_device *netdev);
+-#endif /* _ATL1C_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/atl1c_hw.c linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_hw.c
+--- linux-2.6.29.owrt/drivers/net/atl1c/atl1c_hw.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_hw.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,527 +0,0 @@
+-/*
+- * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+- *
+- * Derived from Intel e1000 driver
+- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- */
+-#include <linux/pci.h>
+-#include <linux/delay.h>
+-#include <linux/mii.h>
+-#include <linux/crc32.h>
+-
+-#include "atl1c.h"
+-
+-/*
+- * check_eeprom_exist
+- * return 1 if eeprom exist
+- */
+-int atl1c_check_eeprom_exist(struct atl1c_hw *hw)
+-{
+-      u32 data;
+-
+-      AT_READ_REG(hw, REG_TWSI_DEBUG, &data);
+-      if (data & TWSI_DEBUG_DEV_EXIST)
+-              return 1;
+-
+-      return 0;
+-}
+-
+-void atl1c_hw_set_mac_addr(struct atl1c_hw *hw)
+-{
+-      u32 value;
+-      /*
+-       * 00-0B-6A-F6-00-DC
+-       * 0:  6AF600DC 1: 000B
+-       * low dword
+-       */
+-      value = (((u32)hw->mac_addr[2]) << 24) |
+-              (((u32)hw->mac_addr[3]) << 16) |
+-              (((u32)hw->mac_addr[4]) << 8)  |
+-              (((u32)hw->mac_addr[5])) ;
+-      AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+-      /* hight dword */
+-      value = (((u32)hw->mac_addr[0]) << 8) |
+-              (((u32)hw->mac_addr[1])) ;
+-      AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+-}
+-
+-/*
+- * atl1c_get_permanent_address
+- * return 0 if get valid mac address,
+- */
+-static int atl1c_get_permanent_address(struct atl1c_hw *hw)
+-{
+-      u32 addr[2];
+-      u32 i;
+-      u32 otp_ctrl_data;
+-      u32 twsi_ctrl_data;
+-      u8  eth_addr[ETH_ALEN];
+-
+-      /* init */
+-      addr[0] = addr[1] = 0;
+-      AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
+-      if (atl1c_check_eeprom_exist(hw)) {
+-              /* Enable OTP CLK */
+-              if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
+-                      otp_ctrl_data |= OTP_CTRL_CLK_EN;
+-                      AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+-                      AT_WRITE_FLUSH(hw);
+-                      msleep(1);
+-              }
+-
+-              AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
+-              twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
+-              AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
+-              for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
+-                      msleep(10);
+-                      AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
+-                      if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
+-                              break;
+-              }
+-              if (i >= AT_TWSI_EEPROM_TIMEOUT)
+-                      return -1;
+-      }
+-      /* Disable OTP_CLK */
+-      if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
+-              otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
+-              AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+-              AT_WRITE_FLUSH(hw);
+-              msleep(1);
+-      }
+-
+-      /* maybe MAC-address is from BIOS */
+-      AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]);
+-      AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]);
+-      *(u32 *) &eth_addr[2] = swab32(addr[0]);
+-      *(u16 *) &eth_addr[0] = swab16(*(u16 *)&addr[1]);
+-
+-      if (is_valid_ether_addr(eth_addr)) {
+-              memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+-              return 0;
+-      }
+-
+-      return -1;
+-}
+-
+-bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value)
+-{
+-      int i;
+-      int ret = false;
+-      u32 otp_ctrl_data;
+-      u32 control;
+-      u32 data;
+-
+-      if (offset & 3)
+-              return ret; /* address do not align */
+-
+-      AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
+-      if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
+-              AT_WRITE_REG(hw, REG_OTP_CTRL,
+-                              (otp_ctrl_data | OTP_CTRL_CLK_EN));
+-
+-      AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0);
+-      control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT;
+-      AT_WRITE_REG(hw, REG_EEPROM_CTRL, control);
+-
+-      for (i = 0; i < 10; i++) {
+-              udelay(100);
+-              AT_READ_REG(hw, REG_EEPROM_CTRL, &control);
+-              if (control & EEPROM_CTRL_RW)
+-                      break;
+-      }
+-      if (control & EEPROM_CTRL_RW) {
+-              AT_READ_REG(hw, REG_EEPROM_CTRL, &data);
+-              AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value);
+-              data = data & 0xFFFF;
+-              *p_value = swab32((data << 16) | (*p_value >> 16));
+-              ret = true;
+-      }
+-      if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
+-              AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+-
+-      return ret;
+-}
+-/*
+- * Reads the adapter's MAC address from the EEPROM
+- *
+- * hw - Struct containing variables accessed by shared code
+- */
+-int atl1c_read_mac_addr(struct atl1c_hw *hw)
+-{
+-      int err = 0;
+-
+-      err = atl1c_get_permanent_address(hw);
+-      if (err)
+-              random_ether_addr(hw->perm_mac_addr);
+-
+-      memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
+-      return 0;
+-}
+-
+-/*
+- * atl1c_hash_mc_addr
+- *  purpose
+- *      set hash value for a multicast address
+- *      hash calcu processing :
+- *          1. calcu 32bit CRC for multicast address
+- *          2. reverse crc with MSB to LSB
+- */
+-u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr)
+-{
+-      u32 crc32;
+-      u32 value = 0;
+-      int i;
+-
+-      crc32 = ether_crc_le(6, mc_addr);
+-      for (i = 0; i < 32; i++)
+-              value |= (((crc32 >> i) & 1) << (31 - i));
+-
+-      return value;
+-}
+-
+-/*
+- * Sets the bit in the multicast table corresponding to the hash value.
+- * hw - Struct containing variables accessed by shared code
+- * hash_value - Multicast address hash value
+- */
+-void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value)
+-{
+-      u32 hash_bit, hash_reg;
+-      u32 mta;
+-
+-      /*
+-       * The HASH Table  is a register array of 2 32-bit registers.
+-       * It is treated like an array of 64 bits.  We want to set
+-       * bit BitArray[hash_value]. So we figure out what register
+-       * the bit is in, read it, OR in the new bit, then write
+-       * back the new value.  The register is determined by the
+-       * upper bit of the hash value and the bit within that
+-       * register are determined by the lower 5 bits of the value.
+-       */
+-      hash_reg = (hash_value >> 31) & 0x1;
+-      hash_bit = (hash_value >> 26) & 0x1F;
+-
+-      mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+-
+-      mta |= (1 << hash_bit);
+-
+-      AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+-}
+-
+-/*
+- * Reads the value from a PHY register
+- * hw - Struct containing variables accessed by shared code
+- * reg_addr - address of the PHY register to read
+- */
+-int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+-{
+-      u32 val;
+-      int i;
+-
+-      val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+-              MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
+-              MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+-
+-      AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+-
+-      for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+-              udelay(2);
+-              AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+-              if (!(val & (MDIO_START | MDIO_BUSY)))
+-                      break;
+-      }
+-      if (!(val & (MDIO_START | MDIO_BUSY))) {
+-              *phy_data = (u16)val;
+-              return 0;
+-      }
+-
+-      return -1;
+-}
+-
+-/*
+- * Writes a value to a PHY register
+- * hw - Struct containing variables accessed by shared code
+- * reg_addr - address of the PHY register to write
+- * data - data to write to the PHY
+- */
+-int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data)
+-{
+-      int i;
+-      u32 val;
+-
+-      val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT   |
+-             (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+-             MDIO_SUP_PREAMBLE | MDIO_START |
+-             MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+-
+-      AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+-
+-      for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+-              udelay(2);
+-              AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+-              if (!(val & (MDIO_START | MDIO_BUSY)))
+-                      break;
+-      }
+-
+-      if (!(val & (MDIO_START | MDIO_BUSY)))
+-              return 0;
+-
+-      return -1;
+-}
+-
+-/*
+- * Configures PHY autoneg and flow control advertisement settings
+- *
+- * hw - Struct containing variables accessed by shared code
+- */
+-static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
+-{
+-      u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK;
+-      u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
+-                              ~GIGA_CR_1000T_SPEED_MASK;
+-
+-      if (hw->autoneg_advertised & ADVERTISED_10baseT_Half)
+-              mii_adv_data |= ADVERTISE_10HALF;
+-      if (hw->autoneg_advertised & ADVERTISED_10baseT_Full)
+-              mii_adv_data |= ADVERTISE_10FULL;
+-      if (hw->autoneg_advertised & ADVERTISED_100baseT_Half)
+-              mii_adv_data |= ADVERTISE_100HALF;
+-      if (hw->autoneg_advertised & ADVERTISED_100baseT_Full)
+-              mii_adv_data |= ADVERTISE_100FULL;
+-
+-      if (hw->autoneg_advertised & ADVERTISED_Autoneg)
+-              mii_adv_data |= ADVERTISE_10HALF  | ADVERTISE_10FULL |
+-                              ADVERTISE_100HALF | ADVERTISE_100FULL;
+-
+-      if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) {
+-              if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half)
+-                      mii_giga_ctrl_data |= ADVERTISE_1000HALF;
+-              if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full)
+-                      mii_giga_ctrl_data |= ADVERTISE_1000FULL;
+-              if (hw->autoneg_advertised & ADVERTISED_Autoneg)
+-                      mii_giga_ctrl_data |= ADVERTISE_1000HALF |
+-                                      ADVERTISE_1000FULL;
+-      }
+-
+-      if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 ||
+-          atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0)
+-              return -1;
+-      return 0;
+-}
+-
+-void atl1c_phy_disable(struct atl1c_hw *hw)
+-{
+-      AT_WRITE_REGW(hw, REG_GPHY_CTRL,
+-                      GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+-}
+-
+-static void atl1c_phy_magic_data(struct atl1c_hw *hw)
+-{
+-      u16 data;
+-
+-      data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE |
+-              ((1 & ANA_INTERVAL_SEL_TIMER_MASK) <<
+-              ANA_INTERVAL_SEL_TIMER_SHIFT);
+-
+-      atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18);
+-      atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-      data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG |
+-              ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL |
+-              ANA_SERDES_EN_LCKDT;
+-
+-      atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5);
+-      atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-      data = (44 & ANA_LONG_CABLE_TH_100_MASK) |
+-              ((33 & ANA_SHORT_CABLE_TH_100_MASK) <<
+-              ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM |
+-              ANA_BP_SMALL_BW;
+-
+-      atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54);
+-      atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-      data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) <<
+-              ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
+-              ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
+-              ANA_IECHO_ADJ_0_SHIFT);
+-
+-      atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4);
+-      atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-      data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) <<
+-              ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE |
+-              ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M;
+-
+-      atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0);
+-      atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-      if (hw->ctrl_flags & ATL1C_HIB_DISABLE) {
+-              atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41);
+-              if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
+-                      return;
+-              data &= ~ANA_TOP_PS_EN;
+-              atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-
+-              atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11);
+-              if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
+-                      return;
+-              data &= ~ANA_PS_HIB_EN;
+-              atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+-      }
+-}
+-
+-int atl1c_phy_reset(struct atl1c_hw *hw)
+-{
+-      struct atl1c_adapter *adapter = hw->adapter;
+-      struct pci_dev *pdev = adapter->pdev;
+-      u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
+-      u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
+-      int err;
+-
+-      if (hw->ctrl_flags & ATL1C_HIB_DISABLE)
+-              phy_ctrl_data &= ~GPHY_CTRL_HIB_EN;
+-
+-      AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+-      AT_WRITE_FLUSH(hw);
+-      msleep(40);
+-      phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
+-      AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+-      AT_WRITE_FLUSH(hw);
+-      msleep(10);
+-
+-      /*Enable PHY LinkChange Interrupt */
+-      err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
+-      if (err) {
+-              if (netif_msg_hw(adapter))
+-                      dev_err(&pdev->dev,
+-                              "Error enable PHY linkChange Interrupt\n");
+-              return err;
+-      }
+-      if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
+-              atl1c_phy_magic_data(hw);
+-      return 0;
+-}
+-
+-int atl1c_phy_init(struct atl1c_hw *hw)
+-{
+-      struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
+-      struct pci_dev *pdev = adapter->pdev;
+-      int ret_val;
+-      u16 mii_bmcr_data = BMCR_RESET;
+-      u16 phy_id1, phy_id2;
+-
+-      if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||
+-              (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {
+-                      if (netif_msg_link(adapter))
+-                              dev_err(&pdev->dev, "Error get phy ID\n");
+-              return -1;
+-      }
+-      switch (hw->media_type) {
+-      case MEDIA_TYPE_AUTO_SENSOR:
+-              ret_val = atl1c_phy_setup_adv(hw);
+-              if (ret_val) {
+-                      if (netif_msg_link(adapter))
+-                              dev_err(&pdev->dev,
+-                                      "Error Setting up Auto-Negotiation\n");
+-                      return ret_val;
+-              }
+-              mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
+-              break;
+-      case MEDIA_TYPE_100M_FULL:
+-              mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX;
+-              break;
+-      case MEDIA_TYPE_100M_HALF:
+-              mii_bmcr_data |= BMCR_SPEED_100;
+-              break;
+-      case MEDIA_TYPE_10M_FULL:
+-              mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX;
+-              break;
+-      case MEDIA_TYPE_10M_HALF:
+-              mii_bmcr_data |= BMCR_SPEED_10;
+-              break;
+-      default:
+-              if (netif_msg_link(adapter))
+-                      dev_err(&pdev->dev, "Wrong Media type %d\n",
+-                              hw->media_type);
+-              return -1;
+-              break;
+-      }
+-
+-      ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
+-      if (ret_val)
+-              return ret_val;
+-      hw->phy_configured = true;
+-
+-      return 0;
+-}
+-
+-/*
+- * Detects the current speed and duplex settings of the hardware.
+- *
+- * hw - Struct containing variables accessed by shared code
+- * speed - Speed of the connection
+- * duplex - Duplex setting of the connection
+- */
+-int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex)
+-{
+-      int err;
+-      u16 phy_data;
+-
+-      /* Read   PHY Specific Status Register (17) */
+-      err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data);
+-      if (err)
+-              return err;
+-
+-      if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED))
+-              return -1;
+-
+-      switch (phy_data & GIGA_PSSR_SPEED) {
+-      case GIGA_PSSR_1000MBS:
+-              *speed = SPEED_1000;
+-              break;
+-      case GIGA_PSSR_100MBS:
+-              *speed = SPEED_100;
+-              break;
+-      case  GIGA_PSSR_10MBS:
+-              *speed = SPEED_10;
+-              break;
+-      default:
+-              return -1;
+-              break;
+-      }
+-
+-      if (phy_data & GIGA_PSSR_DPLX)
+-              *duplex = FULL_DUPLEX;
+-      else
+-              *duplex = HALF_DUPLEX;
+-
+-      return 0;
+-}
+-
+-int atl1c_restart_autoneg(struct atl1c_hw *hw)
+-{
+-      int err = 0;
+-      u16 mii_bmcr_data = BMCR_RESET;
+-
+-      err = atl1c_phy_setup_adv(hw);
+-      if (err)
+-              return err;
+-      mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
+-
+-      return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/atl1c_hw.h linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_hw.h
+--- linux-2.6.29.owrt/drivers/net/atl1c/atl1c_hw.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_hw.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,859 +0,0 @@
+-/*
+- * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+- *
+- * Derived from Intel e1000 driver
+- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- */
+-
+-#ifndef _ATL1C_HW_H_
+-#define _ATL1C_HW_H_
+-
+-#include <linux/types.h>
+-#include <linux/mii.h>
+-
+-struct atl1c_adapter;
+-struct atl1c_hw;
+-
+-/* function prototype */
+-void atl1c_phy_disable(struct atl1c_hw *hw);
+-void atl1c_hw_set_mac_addr(struct atl1c_hw *hw);
+-int atl1c_phy_reset(struct atl1c_hw *hw);
+-int atl1c_read_mac_addr(struct atl1c_hw *hw);
+-int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex);
+-u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr);
+-void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value);
+-int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
+-int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data);
+-bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
+-int atl1c_phy_init(struct atl1c_hw *hw);
+-int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
+-int atl1c_restart_autoneg(struct atl1c_hw *hw);
+-
+-/* register definition */
+-#define REG_DEVICE_CAP                0x5C
+-#define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
+-#define DEVICE_CAP_MAX_PAYLOAD_SHIFT    0
+-
+-#define REG_DEVICE_CTRL                       0x60
+-#define DEVICE_CTRL_MAX_PAYLOAD_MASK    0x7
+-#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT   5
+-#define DEVICE_CTRL_MAX_RREQ_SZ_MASK    0x7
+-#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT   12
+-
+-#define REG_LINK_CTRL                 0x68
+-#define LINK_CTRL_L0S_EN              0x01
+-#define LINK_CTRL_L1_EN                       0x02
+-
+-#define REG_VPD_CAP                   0x6C
+-#define VPD_CAP_ID_MASK                 0xff
+-#define VPD_CAP_ID_SHIFT                0
+-#define VPD_CAP_NEXT_PTR_MASK           0xFF
+-#define VPD_CAP_NEXT_PTR_SHIFT          8
+-#define VPD_CAP_VPD_ADDR_MASK           0x7FFF
+-#define VPD_CAP_VPD_ADDR_SHIFT          16
+-#define VPD_CAP_VPD_FLAG                0x80000000
+-
+-#define REG_VPD_DATA                  0x70
+-
+-#define REG_PCIE_UC_SEVERITY          0x10C
+-#define PCIE_UC_SERVRITY_TRN          0x00000001
+-#define PCIE_UC_SERVRITY_DLP          0x00000010
+-#define PCIE_UC_SERVRITY_PSN_TLP      0x00001000
+-#define PCIE_UC_SERVRITY_FCP          0x00002000
+-#define PCIE_UC_SERVRITY_CPL_TO               0x00004000
+-#define PCIE_UC_SERVRITY_CA           0x00008000
+-#define PCIE_UC_SERVRITY_UC           0x00010000
+-#define PCIE_UC_SERVRITY_ROV          0x00020000
+-#define PCIE_UC_SERVRITY_MLFP         0x00040000
+-#define PCIE_UC_SERVRITY_ECRC         0x00080000
+-#define PCIE_UC_SERVRITY_UR           0x00100000
+-
+-#define REG_DEV_SERIALNUM_CTRL                0x200
+-#define REG_DEV_MAC_SEL_MASK          0x0 /* 0:EUI; 1:MAC */
+-#define REG_DEV_MAC_SEL_SHIFT         0
+-#define REG_DEV_SERIAL_NUM_EN_MASK    0x1
+-#define REG_DEV_SERIAL_NUM_EN_SHIFT   1
+-
+-#define REG_TWSI_CTRL                 0x218
+-#define TWSI_CTRL_LD_OFFSET_MASK        0xFF
+-#define TWSI_CTRL_LD_OFFSET_SHIFT       0
+-#define TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
+-#define TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
+-#define TWSI_CTRL_SW_LDSTART            0x800
+-#define TWSI_CTRL_HW_LDSTART            0x1000
+-#define TWSI_CTRL_SMB_SLV_ADDR_MASK     0x7F
+-#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
+-#define TWSI_CTRL_LD_EXIST              0x400000
+-#define TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
+-#define TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
+-#define TWSI_CTRL_FREQ_SEL_100K         0
+-#define TWSI_CTRL_FREQ_SEL_200K         1
+-#define TWSI_CTRL_FREQ_SEL_300K         2
+-#define TWSI_CTRL_FREQ_SEL_400K         3
+-#define TWSI_CTRL_SMB_SLV_ADDR
+-#define TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
+-#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24
+-
+-
+-#define REG_PCIE_DEV_MISC_CTRL        0x21C
+-#define PCIE_DEV_MISC_EXT_PIPE        0x2
+-#define PCIE_DEV_MISC_RETRY_BUFDIS    0x1
+-#define PCIE_DEV_MISC_SPIROM_EXIST    0x4
+-#define PCIE_DEV_MISC_SERDES_ENDIAN           0x8
+-#define PCIE_DEV_MISC_SERDES_SEL_DIN          0x10
+-
+-#define REG_PCIE_PHYMISC              0x1000
+-#define PCIE_PHYMISC_FORCE_RCV_DET    0x4
+-
+-#define REG_TWSI_DEBUG                        0x1108
+-#define TWSI_DEBUG_DEV_EXIST          0x20000000
+-
+-#define REG_EEPROM_CTRL                       0x12C0
+-#define EEPROM_CTRL_DATA_HI_MASK      0xFFFF
+-#define EEPROM_CTRL_DATA_HI_SHIFT     0
+-#define EEPROM_CTRL_ADDR_MASK         0x3FF
+-#define EEPROM_CTRL_ADDR_SHIFT                16
+-#define EEPROM_CTRL_ACK                       0x40000000
+-#define EEPROM_CTRL_RW                        0x80000000
+-
+-#define REG_EEPROM_DATA_LO            0x12C4
+-
+-#define REG_OTP_CTRL                  0x12F0
+-#define OTP_CTRL_CLK_EN                       0x0002
+-
+-#define REG_PM_CTRL                   0x12F8
+-#define PM_CTRL_SDES_EN                       0x00000001
+-#define PM_CTRL_RBER_EN                       0x00000002
+-#define PM_CTRL_CLK_REQ_EN            0x00000004
+-#define PM_CTRL_ASPM_L1_EN            0x00000008
+-#define PM_CTRL_SERDES_L1_EN          0x00000010
+-#define PM_CTRL_SERDES_PLL_L1_EN      0x00000020
+-#define PM_CTRL_SERDES_PD_EX_L1               0x00000040
+-#define PM_CTRL_SERDES_BUDS_RX_L1_EN  0x00000080
+-#define PM_CTRL_L0S_ENTRY_TIMER_MASK  0xF
+-#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8
+-#define PM_CTRL_ASPM_L0S_EN           0x00001000
+-#define PM_CTRL_CLK_SWH_L1            0x00002000
+-#define PM_CTRL_CLK_PWM_VER1_1                0x00004000
+-#define PM_CTRL_PCIE_RECV             0x00008000
+-#define PM_CTRL_L1_ENTRY_TIMER_MASK   0xF
+-#define PM_CTRL_L1_ENTRY_TIMER_SHIFT  16
+-#define PM_CTRL_PM_REQ_TIMER_MASK     0xF
+-#define PM_CTRL_PM_REQ_TIMER_SHIFT    20
+-#define PM_CTRL_LCKDET_TIMER_MASK     0x3F
+-#define PM_CTRL_LCKDET_TIMER_SHIFT    24
+-#define PM_CTRL_MAC_ASPM_CHK          0x40000000
+-#define PM_CTRL_HOTRST                        0x80000000
+-
+-/* Selene Master Control Register */
+-#define REG_MASTER_CTRL                       0x1400
+-#define MASTER_CTRL_SOFT_RST            0x1
+-#define MASTER_CTRL_TEST_MODE_MASK    0x3
+-#define MASTER_CTRL_TEST_MODE_SHIFT   2
+-#define MASTER_CTRL_BERT_START                0x10
+-#define MASTER_CTRL_MTIMER_EN           0x100
+-#define MASTER_CTRL_MANUAL_INT          0x200
+-#define MASTER_CTRL_TX_ITIMER_EN      0x400
+-#define MASTER_CTRL_RX_ITIMER_EN      0x800
+-#define MASTER_CTRL_CLK_SEL_DIS               0x1000
+-#define MASTER_CTRL_CLK_SWH_MODE      0x2000
+-#define MASTER_CTRL_INT_RDCLR         0x4000
+-#define MASTER_CTRL_REV_NUM_SHIFT     16
+-#define MASTER_CTRL_REV_NUM_MASK      0xff
+-#define MASTER_CTRL_DEV_ID_SHIFT      24
+-#define MASTER_CTRL_DEV_ID_MASK               0x7f
+-#define MASTER_CTRL_OTP_SEL           0x80000000
+-
+-/* Timer Initial Value Register */
+-#define REG_MANUAL_TIMER_INIT         0x1404
+-
+-/* IRQ ModeratorTimer Initial Value Register */
+-#define REG_IRQ_MODRT_TIMER_INIT      0x1408
+-#define IRQ_MODRT_TIMER_MASK          0xffff
+-#define IRQ_MODRT_TX_TIMER_SHIFT      0
+-#define IRQ_MODRT_RX_TIMER_SHIFT      16
+-
+-#define REG_GPHY_CTRL                 0x140C
+-#define GPHY_CTRL_EXT_RESET           0x1
+-#define GPHY_CTRL_RTL_MODE            0x2
+-#define GPHY_CTRL_LED_MODE            0x4
+-#define GPHY_CTRL_ANEG_NOW            0x8
+-#define GPHY_CTRL_REV_ANEG            0x10
+-#define GPHY_CTRL_GATE_25M_EN         0x20
+-#define GPHY_CTRL_LPW_EXIT            0x40
+-#define GPHY_CTRL_PHY_IDDQ            0x80
+-#define GPHY_CTRL_PHY_IDDQ_DIS        0x100
+-#define GPHY_CTRL_GIGA_DIS            0x200
+-#define GPHY_CTRL_HIB_EN              0x400
+-#define GPHY_CTRL_HIB_PULSE           0x800
+-#define GPHY_CTRL_SEL_ANA_RST         0x1000
+-#define GPHY_CTRL_PHY_PLL_ON          0x2000
+-#define GPHY_CTRL_PWDOWN_HW           0x4000
+-#define GPHY_CTRL_PHY_PLL_BYPASS      0x8000
+-
+-#define GPHY_CTRL_DEFAULT (            \
+-              GPHY_CTRL_SEL_ANA_RST   |\
+-              GPHY_CTRL_HIB_PULSE     |\
+-              GPHY_CTRL_HIB_EN)
+-
+-#define GPHY_CTRL_PW_WOL_DIS (                 \
+-              GPHY_CTRL_SEL_ANA_RST   |\
+-              GPHY_CTRL_HIB_PULSE     |\
+-              GPHY_CTRL_HIB_EN        |\
+-              GPHY_CTRL_PWDOWN_HW     |\
+-              GPHY_CTRL_PHY_IDDQ)
+-
+-/* Block IDLE Status Register */
+-#define REG_IDLE_STATUS               0x1410
+-#define IDLE_STATUS_MASK              0x00FF
+-#define IDLE_STATUS_RXMAC_NO_IDLE             0x1
+-#define IDLE_STATUS_TXMAC_NO_IDLE             0x2
+-#define IDLE_STATUS_RXQ_NO_IDLE               0x4
+-#define IDLE_STATUS_TXQ_NO_IDLE               0x8
+-#define IDLE_STATUS_DMAR_NO_IDLE              0x10
+-#define IDLE_STATUS_DMAW_NO_IDLE              0x20
+-#define IDLE_STATUS_SMB_NO_IDLE               0x40
+-#define IDLE_STATUS_CMB_NO_IDLE               0x80
+-
+-/* MDIO Control Register */
+-#define REG_MDIO_CTRL                 0x1414
+-#define MDIO_DATA_MASK                0xffff  /* On MDIO write, the 16-bit
+-                                               * control data to write to PHY
+-                                               * MII management register */
+-#define MDIO_DATA_SHIFT               0       /* On MDIO read, the 16-bit
+-                                               * status data that was read
+-                                               * from the PHY MII management register */
+-#define MDIO_REG_ADDR_MASK            0x1f    /* MDIO register address */
+-#define MDIO_REG_ADDR_SHIFT           16
+-#define MDIO_RW                       0x200000  /* 1: read, 0: write */
+-#define MDIO_SUP_PREAMBLE             0x400000  /* Suppress preamble */
+-#define MDIO_START                    0x800000  /* Write 1 to initiate the MDIO
+-                                                 * master. And this bit is self
+-                                                 * cleared after one cycle */
+-#define MDIO_CLK_SEL_SHIFT            24
+-#define MDIO_CLK_25_4                 0
+-#define MDIO_CLK_25_6                 2
+-#define MDIO_CLK_25_8                 3
+-#define MDIO_CLK_25_10                4
+-#define MDIO_CLK_25_14                5
+-#define MDIO_CLK_25_20                6
+-#define MDIO_CLK_25_28                7
+-#define MDIO_BUSY                     0x8000000
+-#define MDIO_AP_EN                    0x10000000
+-#define MDIO_WAIT_TIMES               10
+-
+-/* MII PHY Status Register */
+-#define REG_PHY_STATUS                0x1418
+-#define PHY_GENERAL_STATUS_MASK               0xFFFF
+-#define PHY_STATUS_RECV_ENABLE                0x0001
+-#define PHY_OE_PWSP_STATUS_MASK               0x07FF
+-#define PHY_OE_PWSP_STATUS_SHIFT      16
+-#define PHY_STATUS_LPW_STATE          0x80000000
+-/* BIST Control and Status Register0 (for the Packet Memory) */
+-#define REG_BIST0_CTRL                0x141c
+-#define BIST0_NOW                     0x1
+-#define BIST0_SRAM_FAIL               0x2 /* 1: The SRAM failure is
+-                                           * un-repairable  because
+-                                           * it has address decoder
+-                                           * failure or more than 1 cell
+-                                           * stuck-to-x failure */
+-#define BIST0_FUSE_FLAG               0x4
+-
+-/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
+-#define REG_BIST1_CTRL                        0x1420
+-#define BIST1_NOW                     0x1
+-#define BIST1_SRAM_FAIL               0x2
+-#define BIST1_FUSE_FLAG               0x4
+-
+-/* SerDes Lock Detect Control and Status Register */
+-#define REG_SERDES_LOCK               0x1424
+-#define SERDES_LOCK_DETECT            0x1  /* SerDes lock detected. This signal
+-                                            * comes from Analog SerDes */
+-#define SERDES_LOCK_DETECT_EN         0x2  /* 1: Enable SerDes Lock detect function */
+-
+-/* MAC Control Register  */
+-#define REG_MAC_CTRL                  0x1480
+-#define MAC_CTRL_TX_EN                        0x1
+-#define MAC_CTRL_RX_EN                        0x2
+-#define MAC_CTRL_TX_FLOW              0x4
+-#define MAC_CTRL_RX_FLOW              0x8
+-#define MAC_CTRL_LOOPBACK             0x10
+-#define MAC_CTRL_DUPLX                0x20
+-#define MAC_CTRL_ADD_CRC              0x40
+-#define MAC_CTRL_PAD                  0x80
+-#define MAC_CTRL_LENCHK               0x100
+-#define MAC_CTRL_HUGE_EN              0x200
+-#define MAC_CTRL_PRMLEN_SHIFT         10
+-#define MAC_CTRL_PRMLEN_MASK          0xf
+-#define MAC_CTRL_RMV_VLAN             0x4000
+-#define MAC_CTRL_PROMIS_EN            0x8000
+-#define MAC_CTRL_TX_PAUSE             0x10000
+-#define MAC_CTRL_SCNT                 0x20000
+-#define MAC_CTRL_SRST_TX              0x40000
+-#define MAC_CTRL_TX_SIMURST           0x80000
+-#define MAC_CTRL_SPEED_SHIFT          20
+-#define MAC_CTRL_SPEED_MASK           0x3
+-#define MAC_CTRL_DBG_TX_BKPRESURE     0x400000
+-#define MAC_CTRL_TX_HUGE              0x800000
+-#define MAC_CTRL_RX_CHKSUM_EN         0x1000000
+-#define MAC_CTRL_MC_ALL_EN            0x2000000
+-#define MAC_CTRL_BC_EN                0x4000000
+-#define MAC_CTRL_DBG                  0x8000000
+-#define MAC_CTRL_SINGLE_PAUSE_EN      0x10000000
+-
+-/* MAC IPG/IFG Control Register  */
+-#define REG_MAC_IPG_IFG               0x1484
+-#define MAC_IPG_IFG_IPGT_SHIFT        0       /* Desired back to back
+-                                               * inter-packet gap. The
+-                                               * default is 96-bit time */
+-#define MAC_IPG_IFG_IPGT_MASK         0x7f
+-#define MAC_IPG_IFG_MIFG_SHIFT        8       /* Minimum number of IFG to
+-                                               * enforce in between RX frames */
+-#define MAC_IPG_IFG_MIFG_MASK         0xff    /* Frame gap below such IFP is dropped */
+-#define MAC_IPG_IFG_IPGR1_SHIFT       16      /* 64bit Carrier-Sense window */
+-#define MAC_IPG_IFG_IPGR1_MASK        0x7f
+-#define MAC_IPG_IFG_IPGR2_SHIFT       24      /* 96-bit IPG window */
+-#define MAC_IPG_IFG_IPGR2_MASK        0x7f
+-
+-/* MAC STATION ADDRESS  */
+-#define REG_MAC_STA_ADDR              0x1488
+-
+-/* Hash table for multicast address */
+-#define REG_RX_HASH_TABLE             0x1490
+-
+-/* MAC Half-Duplex Control Register */
+-#define REG_MAC_HALF_DUPLX_CTRL       0x1498
+-#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT  0      /* Collision Window */
+-#define MAC_HALF_DUPLX_CTRL_LCOL_MASK   0x3ff
+-#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+-#define MAC_HALF_DUPLX_CTRL_RETRY_MASK  0xf
+-#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN  0x10000
+-#define MAC_HALF_DUPLX_CTRL_NO_BACK_C   0x20000
+-#define MAC_HALF_DUPLX_CTRL_NO_BACK_P   0x40000 /* No back-off on backpressure,
+-                                               * immediately start the
+-                                               * transmission after back pressure */
+-#define MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
+-#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
+-#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
+-#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
+-#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */
+-
+-/* Maximum Frame Length Control Register   */
+-#define REG_MTU                       0x149c
+-
+-/* Wake-On-Lan control register */
+-#define REG_WOL_CTRL                  0x14a0
+-#define WOL_PATTERN_EN                0x00000001
+-#define WOL_PATTERN_PME_EN              0x00000002
+-#define WOL_MAGIC_EN                    0x00000004
+-#define WOL_MAGIC_PME_EN                0x00000008
+-#define WOL_LINK_CHG_EN                 0x00000010
+-#define WOL_LINK_CHG_PME_EN             0x00000020
+-#define WOL_PATTERN_ST                  0x00000100
+-#define WOL_MAGIC_ST                    0x00000200
+-#define WOL_LINKCHG_ST                  0x00000400
+-#define WOL_CLK_SWITCH_EN               0x00008000
+-#define WOL_PT0_EN                      0x00010000
+-#define WOL_PT1_EN                      0x00020000
+-#define WOL_PT2_EN                      0x00040000
+-#define WOL_PT3_EN                      0x00080000
+-#define WOL_PT4_EN                      0x00100000
+-#define WOL_PT5_EN                      0x00200000
+-#define WOL_PT6_EN                      0x00400000
+-
+-/* WOL Length ( 2 DWORD ) */
+-#define REG_WOL_PATTERN_LEN           0x14a4
+-#define WOL_PT_LEN_MASK                 0x7f
+-#define WOL_PT0_LEN_SHIFT               0
+-#define WOL_PT1_LEN_SHIFT               8
+-#define WOL_PT2_LEN_SHIFT               16
+-#define WOL_PT3_LEN_SHIFT               24
+-#define WOL_PT4_LEN_SHIFT               0
+-#define WOL_PT5_LEN_SHIFT               8
+-#define WOL_PT6_LEN_SHIFT               16
+-
+-/* Internal SRAM Partition Register */
+-#define RFDX_HEAD_ADDR_MASK           0x03FF
+-#define RFDX_HARD_ADDR_SHIFT          0
+-#define RFDX_TAIL_ADDR_MASK           0x03FF
+-#define RFDX_TAIL_ADDR_SHIFT            16
+-
+-#define REG_SRAM_RFD0_INFO            0x1500
+-#define REG_SRAM_RFD1_INFO            0x1504
+-#define REG_SRAM_RFD2_INFO            0x1508
+-#define       REG_SRAM_RFD3_INFO              0x150C
+-
+-#define REG_RFD_NIC_LEN                       0x1510 /* In 8-bytes */
+-#define RFD_NIC_LEN_MASK              0x03FF
+-
+-#define REG_SRAM_TRD_ADDR             0x1518
+-#define TPD_HEAD_ADDR_MASK            0x03FF
+-#define TPD_HEAD_ADDR_SHIFT           0
+-#define TPD_TAIL_ADDR_MASK            0x03FF
+-#define TPD_TAIL_ADDR_SHIFT           16
+-
+-#define REG_SRAM_TRD_LEN              0x151C /* In 8-bytes */
+-#define TPD_NIC_LEN_MASK              0x03FF
+-
+-#define REG_SRAM_RXF_ADDR             0x1520
+-#define REG_SRAM_RXF_LEN              0x1524
+-#define REG_SRAM_TXF_ADDR             0x1528
+-#define REG_SRAM_TXF_LEN              0x152C
+-#define REG_SRAM_TCPH_ADDR            0x1530
+-#define REG_SRAM_PKTH_ADDR            0x1532
+-
+-/*
+- * Load Ptr Register
+- * Software sets this bit after the initialization of the head and tail */
+-#define REG_LOAD_PTR                  0x1534
+-
+-/*
+- * addresses of all descriptors, as well as the following descriptor
+- * control register, which triggers each function block to load the head
+- * pointer to prepare for the operation. This bit is then self-cleared
+- * after one cycle.
+- */
+-#define REG_RX_BASE_ADDR_HI           0x1540
+-#define REG_TX_BASE_ADDR_HI           0x1544
+-#define REG_SMB_BASE_ADDR_HI          0x1548
+-#define REG_SMB_BASE_ADDR_LO          0x154C
+-#define REG_RFD0_HEAD_ADDR_LO         0x1550
+-#define REG_RFD1_HEAD_ADDR_LO         0x1554
+-#define REG_RFD2_HEAD_ADDR_LO         0x1558
+-#define REG_RFD3_HEAD_ADDR_LO         0x155C
+-#define REG_RFD_RING_SIZE             0x1560
+-#define RFD_RING_SIZE_MASK            0x0FFF
+-#define REG_RX_BUF_SIZE                       0x1564
+-#define RX_BUF_SIZE_MASK              0xFFFF
+-#define REG_RRD0_HEAD_ADDR_LO         0x1568
+-#define REG_RRD1_HEAD_ADDR_LO         0x156C
+-#define REG_RRD2_HEAD_ADDR_LO         0x1570
+-#define REG_RRD3_HEAD_ADDR_LO         0x1574
+-#define REG_RRD_RING_SIZE             0x1578
+-#define RRD_RING_SIZE_MASK            0x0FFF
+-#define REG_HTPD_HEAD_ADDR_LO         0x157C
+-#define REG_NTPD_HEAD_ADDR_LO         0x1580
+-#define REG_TPD_RING_SIZE             0x1584
+-#define TPD_RING_SIZE_MASK            0xFFFF
+-#define REG_CMB_BASE_ADDR_LO          0x1588
+-
+-/* RSS about */
+-#define REG_RSS_KEY0                    0x14B0
+-#define REG_RSS_KEY1                    0x14B4
+-#define REG_RSS_KEY2                    0x14B8
+-#define REG_RSS_KEY3                    0x14BC
+-#define REG_RSS_KEY4                    0x14C0
+-#define REG_RSS_KEY5                    0x14C4
+-#define REG_RSS_KEY6                    0x14C8
+-#define REG_RSS_KEY7                    0x14CC
+-#define REG_RSS_KEY8                    0x14D0
+-#define REG_RSS_KEY9                    0x14D4
+-#define REG_IDT_TABLE0                        0x14E0
+-#define REG_IDT_TABLE1                  0x14E4
+-#define REG_IDT_TABLE2                  0x14E8
+-#define REG_IDT_TABLE3                  0x14EC
+-#define REG_IDT_TABLE4                  0x14F0
+-#define REG_IDT_TABLE5                  0x14F4
+-#define REG_IDT_TABLE6                  0x14F8
+-#define REG_IDT_TABLE7                  0x14FC
+-#define REG_IDT_TABLE                   REG_IDT_TABLE0
+-#define REG_RSS_HASH_VALUE              0x15B0
+-#define REG_RSS_HASH_FLAG               0x15B4
+-#define REG_BASE_CPU_NUMBER             0x15B8
+-
+-/* TXQ Control Register */
+-#define REG_TXQ_CTRL                  0x1590
+-#define       TXQ_NUM_TPD_BURST_MASK          0xF
+-#define TXQ_NUM_TPD_BURST_SHIFT       0
+-#define TXQ_CTRL_IP_OPTION_EN         0x10
+-#define TXQ_CTRL_EN                     0x20
+-#define TXQ_CTRL_ENH_MODE               0x40
+-#define TXQ_CTRL_LS_8023_EN           0x80
+-#define TXQ_TXF_BURST_NUM_SHIFT       16
+-#define TXQ_TXF_BURST_NUM_MASK        0xFFFF
+-
+-/* Jumbo packet Threshold for task offload */
+-#define REG_TX_TSO_OFFLOAD_THRESH     0x1594 /* In 8-bytes */
+-#define TX_TSO_OFFLOAD_THRESH_MASK    0x07FF
+-
+-#define       REG_TXF_WATER_MARK              0x1598 /* In 8-bytes */
+-#define TXF_WATER_MARK_MASK           0x0FFF
+-#define TXF_LOW_WATER_MARK_SHIFT      0
+-#define TXF_HIGH_WATER_MARK_SHIFT     16
+-#define TXQ_CTRL_BURST_MODE_EN                0x80000000
+-
+-#define REG_THRUPUT_MON_CTRL          0x159C
+-#define THRUPUT_MON_RATE_MASK         0x3
+-#define THRUPUT_MON_RATE_SHIFT                0
+-#define THRUPUT_MON_EN                        0x80
+-
+-/* RXQ Control Register */
+-#define REG_RXQ_CTRL                  0x15A0
+-#define ASPM_THRUPUT_LIMIT_MASK               0x3
+-#define ASPM_THRUPUT_LIMIT_SHIFT      0
+-#define ASPM_THRUPUT_LIMIT_NO         0x00
+-#define ASPM_THRUPUT_LIMIT_1M         0x01
+-#define ASPM_THRUPUT_LIMIT_10M                0x02
+-#define ASPM_THRUPUT_LIMIT_100M               0x04
+-#define RXQ1_CTRL_EN                  0x10
+-#define RXQ2_CTRL_EN                  0x20
+-#define RXQ3_CTRL_EN                  0x40
+-#define IPV6_CHKSUM_CTRL_EN           0x80
+-#define RSS_HASH_BITS_MASK            0x00FF
+-#define RSS_HASH_BITS_SHIFT           8
+-#define RSS_HASH_IPV4                 0x10000
+-#define RSS_HASH_IPV4_TCP             0x20000
+-#define RSS_HASH_IPV6                 0x40000
+-#define RSS_HASH_IPV6_TCP             0x80000
+-#define RXQ_RFD_BURST_NUM_MASK                0x003F
+-#define RXQ_RFD_BURST_NUM_SHIFT               20
+-#define RSS_MODE_MASK                 0x0003
+-#define RSS_MODE_SHIFT                        26
+-#define RSS_NIP_QUEUE_SEL_MASK                0x1
+-#define RSS_NIP_QUEUE_SEL_SHIFT               28
+-#define RRS_HASH_CTRL_EN              0x20000000
+-#define RX_CUT_THRU_EN                        0x40000000
+-#define RXQ_CTRL_EN                   0x80000000
+-
+-#define REG_RFD_FREE_THRESH           0x15A4
+-#define RFD_FREE_THRESH_MASK          0x003F
+-#define RFD_FREE_HI_THRESH_SHIFT      0
+-#define RFD_FREE_LO_THRESH_SHIFT      6
+-
+-/* RXF flow control register */
+-#define REG_RXQ_RXF_PAUSE_THRESH      0x15A8
+-#define RXQ_RXF_PAUSE_TH_HI_SHIFT       0
+-#define RXQ_RXF_PAUSE_TH_HI_MASK        0x0FFF
+-#define RXQ_RXF_PAUSE_TH_LO_SHIFT       16
+-#define RXQ_RXF_PAUSE_TH_LO_MASK        0x0FFF
+-
+-#define REG_RXD_DMA_CTRL              0x15AC
+-#define RXD_DMA_THRESH_MASK           0x0FFF  /* In 8-bytes */
+-#define RXD_DMA_THRESH_SHIFT          0
+-#define RXD_DMA_DOWN_TIMER_MASK               0xFFFF
+-#define RXD_DMA_DOWN_TIMER_SHIFT      16
+-
+-/* DMA Engine Control Register */
+-#define REG_DMA_CTRL                  0x15C0
+-#define DMA_CTRL_DMAR_IN_ORDER          0x1
+-#define DMA_CTRL_DMAR_ENH_ORDER         0x2
+-#define DMA_CTRL_DMAR_OUT_ORDER         0x4
+-#define DMA_CTRL_RCB_VALUE              0x8
+-#define DMA_CTRL_DMAR_BURST_LEN_MASK    0x0007
+-#define DMA_CTRL_DMAR_BURST_LEN_SHIFT   4
+-#define DMA_CTRL_DMAW_BURST_LEN_MASK    0x0007
+-#define DMA_CTRL_DMAW_BURST_LEN_SHIFT   7
+-#define DMA_CTRL_DMAR_REQ_PRI           0x400
+-#define DMA_CTRL_DMAR_DLY_CNT_MASK      0x001F
+-#define DMA_CTRL_DMAR_DLY_CNT_SHIFT     11
+-#define DMA_CTRL_DMAW_DLY_CNT_MASK      0x000F
+-#define DMA_CTRL_DMAW_DLY_CNT_SHIFT     16
+-#define DMA_CTRL_CMB_EN                       0x100000
+-#define DMA_CTRL_SMB_EN                       0x200000
+-#define DMA_CTRL_CMB_NOW              0x400000
+-#define MAC_CTRL_SMB_DIS              0x1000000
+-#define DMA_CTRL_SMB_NOW              0x80000000
+-
+-/* CMB/SMB Control Register */
+-#define REG_SMB_STAT_TIMER            0x15C4  /* 2us resolution */
+-#define SMB_STAT_TIMER_MASK           0xFFFFFF
+-#define REG_CMB_TPD_THRESH            0x15C8
+-#define CMB_TPD_THRESH_MASK           0xFFFF
+-#define REG_CMB_TX_TIMER              0x15CC  /* 2us resolution */
+-#define CMB_TX_TIMER_MASK             0xFFFF
+-
+-/* Mail box */
+-#define MB_RFDX_PROD_IDX_MASK         0xFFFF
+-#define REG_MB_RFD0_PROD_IDX          0x15E0
+-#define REG_MB_RFD1_PROD_IDX          0x15E4
+-#define REG_MB_RFD2_PROD_IDX          0x15E8
+-#define REG_MB_RFD3_PROD_IDX          0x15EC
+-
+-#define MB_PRIO_PROD_IDX_MASK         0xFFFF
+-#define REG_MB_PRIO_PROD_IDX          0x15F0
+-#define MB_HTPD_PROD_IDX_SHIFT                0
+-#define MB_NTPD_PROD_IDX_SHIFT                16
+-
+-#define MB_PRIO_CONS_IDX_MASK         0xFFFF
+-#define REG_MB_PRIO_CONS_IDX          0x15F4
+-#define MB_HTPD_CONS_IDX_SHIFT                0
+-#define MB_NTPD_CONS_IDX_SHIFT                16
+-
+-#define REG_MB_RFD01_CONS_IDX         0x15F8
+-#define MB_RFD0_CONS_IDX_MASK         0x0000FFFF
+-#define MB_RFD1_CONS_IDX_MASK         0xFFFF0000
+-#define REG_MB_RFD23_CONS_IDX         0x15FC
+-#define MB_RFD2_CONS_IDX_MASK         0x0000FFFF
+-#define MB_RFD3_CONS_IDX_MASK         0xFFFF0000
+-
+-/* Interrupt Status Register */
+-#define REG_ISR                       0x1600
+-#define ISR_SMB                               0x00000001
+-#define ISR_TIMER                     0x00000002
+-/*
+- * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
+- * in Table 51 Selene Master Control Register (Offset 0x1400).
+- */
+-#define ISR_MANUAL                    0x00000004
+-#define ISR_HW_RXF_OV                         0x00000008 /* RXF overflow interrupt */
+-#define ISR_RFD0_UR                   0x00000010 /* RFD0 under run */
+-#define ISR_RFD1_UR                   0x00000020
+-#define ISR_RFD2_UR                   0x00000040
+-#define ISR_RFD3_UR                   0x00000080
+-#define ISR_TXF_UR                    0x00000100
+-#define ISR_DMAR_TO_RST                       0x00000200
+-#define ISR_DMAW_TO_RST                       0x00000400
+-#define ISR_TX_CREDIT                 0x00000800
+-#define ISR_GPHY                      0x00001000
+-/* GPHY low power state interrupt */
+-#define ISR_GPHY_LPW                          0x00002000
+-#define ISR_TXQ_TO_RST                        0x00004000
+-#define ISR_TX_PKT                    0x00008000
+-#define ISR_RX_PKT_0                  0x00010000
+-#define ISR_RX_PKT_1                  0x00020000
+-#define ISR_RX_PKT_2                  0x00040000
+-#define ISR_RX_PKT_3                  0x00080000
+-#define ISR_MAC_RX                    0x00100000
+-#define ISR_MAC_TX                    0x00200000
+-#define ISR_UR_DETECTED                       0x00400000
+-#define ISR_FERR_DETECTED             0x00800000
+-#define ISR_NFERR_DETECTED            0x01000000
+-#define ISR_CERR_DETECTED             0x02000000
+-#define ISR_PHY_LINKDOWN              0x04000000
+-#define ISR_DIS_INT                   0x80000000
+-
+-/* Interrupt Mask Register */
+-#define REG_IMR                               0x1604
+-
+-#define IMR_NORMAL_MASK               (\
+-              ISR_MANUAL      |\
+-              ISR_HW_RXF_OV   |\
+-              ISR_RFD0_UR     |\
+-              ISR_TXF_UR      |\
+-              ISR_DMAR_TO_RST |\
+-              ISR_TXQ_TO_RST  |\
+-              ISR_DMAW_TO_RST |\
+-              ISR_GPHY        |\
+-              ISR_TX_PKT      |\
+-              ISR_RX_PKT_0    |\
+-              ISR_GPHY_LPW    |\
+-              ISR_PHY_LINKDOWN)
+-
+-#define ISR_RX_PKT    (\
+-      ISR_RX_PKT_0    |\
+-      ISR_RX_PKT_1    |\
+-      ISR_RX_PKT_2    |\
+-      ISR_RX_PKT_3)
+-
+-#define ISR_OVER      (\
+-      ISR_RFD0_UR     |\
+-      ISR_RFD1_UR     |\
+-      ISR_RFD2_UR     |\
+-      ISR_RFD3_UR     |\
+-      ISR_HW_RXF_OV   |\
+-      ISR_TXF_UR)
+-
+-#define ISR_ERROR     (\
+-      ISR_DMAR_TO_RST |\
+-      ISR_TXQ_TO_RST  |\
+-      ISR_DMAW_TO_RST |\
+-      ISR_PHY_LINKDOWN)
+-
+-#define REG_INT_RETRIG_TIMER          0x1608
+-#define INT_RETRIG_TIMER_MASK         0xFFFF
+-
+-#define REG_HDS_CTRL                  0x160C
+-#define HDS_CTRL_EN                   0x0001
+-#define HDS_CTRL_BACKFILLSIZE_SHIFT   8
+-#define HDS_CTRL_BACKFILLSIZE_MASK    0x0FFF
+-#define HDS_CTRL_MAX_HDRSIZE_SHIFT    20
+-#define HDS_CTRL_MAC_HDRSIZE_MASK     0x0FFF
+-
+-#define REG_MAC_RX_STATUS_BIN                 0x1700
+-#define REG_MAC_RX_STATUS_END                 0x175c
+-#define REG_MAC_TX_STATUS_BIN                 0x1760
+-#define REG_MAC_TX_STATUS_END                 0x17c0
+-
+-/* DEBUG ADDR */
+-#define REG_DEBUG_DATA0               0x1900
+-#define REG_DEBUG_DATA1               0x1904
+-
+-/* PHY Control Register */
+-#define MII_BMCR                      0x00
+-#define BMCR_SPEED_SELECT_MSB         0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+-#define BMCR_COLL_TEST_ENABLE         0x0080  /* Collision test enable */
+-#define BMCR_FULL_DUPLEX              0x0100  /* FDX =1, half duplex =0 */
+-#define BMCR_RESTART_AUTO_NEG         0x0200  /* Restart auto negotiation */
+-#define BMCR_ISOLATE                  0x0400  /* Isolate PHY from MII */
+-#define BMCR_POWER_DOWN                       0x0800  /* Power down */
+-#define BMCR_AUTO_NEG_EN              0x1000  /* Auto Neg Enable */
+-#define BMCR_SPEED_SELECT_LSB         0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+-#define BMCR_LOOPBACK                 0x4000  /* 0 = normal, 1 = loopback */
+-#define BMCR_RESET                    0x8000  /* 0 = normal, 1 = PHY reset */
+-#define BMCR_SPEED_MASK                       0x2040
+-#define BMCR_SPEED_1000                       0x0040
+-#define BMCR_SPEED_100                        0x2000
+-#define BMCR_SPEED_10                 0x0000
+-
+-/* PHY Status Register */
+-#define MII_BMSR                      0x01
+-#define BMMSR_EXTENDED_CAPS           0x0001  /* Extended register capabilities */
+-#define BMSR_JABBER_DETECT            0x0002  /* Jabber Detected */
+-#define BMSR_LINK_STATUS              0x0004  /* Link Status 1 = link */
+-#define BMSR_AUTONEG_CAPS             0x0008  /* Auto Neg Capable */
+-#define BMSR_REMOTE_FAULT             0x0010  /* Remote Fault Detect */
+-#define BMSR_AUTONEG_COMPLETE         0x0020  /* Auto Neg Complete */
+-#define BMSR_PREAMBLE_SUPPRESS                0x0040  /* Preamble may be suppressed */
+-#define BMSR_EXTENDED_STATUS          0x0100  /* Ext. status info in Reg 0x0F */
+-#define BMSR_100T2_HD_CAPS            0x0200  /* 100T2 Half Duplex Capable */
+-#define BMSR_100T2_FD_CAPS            0x0400  /* 100T2 Full Duplex Capable */
+-#define BMSR_10T_HD_CAPS              0x0800  /* 10T   Half Duplex Capable */
+-#define BMSR_10T_FD_CAPS              0x1000  /* 10T   Full Duplex Capable */
+-#define BMSR_100X_HD_CAPS             0x2000  /* 100X  Half Duplex Capable */
+-#define BMMII_SR_100X_FD_CAPS         0x4000  /* 100X  Full Duplex Capable */
+-#define BMMII_SR_100T4_CAPS           0x8000  /* 100T4 Capable */
+-
+-#define MII_PHYSID1                   0x02
+-#define MII_PHYSID2                   0x03
+-
+-/* Autoneg Advertisement Register */
+-#define MII_ADVERTISE                 0x04
+-#define ADVERTISE_SPEED_MASK          0x01E0
+-#define ADVERTISE_DEFAULT_CAP         0x0DE0
+-
+-/* 1000BASE-T Control Register */
+-#define MII_GIGA_CR                   0x09
+-#define GIGA_CR_1000T_REPEATER_DTE    0x0400  /* 1=Repeater/switch device port 0=DTE device */
+-
+-#define GIGA_CR_1000T_MS_VALUE                0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */
+-#define GIGA_CR_1000T_MS_ENABLE               0x1000  /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+-#define GIGA_CR_1000T_TEST_MODE_NORMAL        0x0000  /* Normal Operation */
+-#define GIGA_CR_1000T_TEST_MODE_1     0x2000  /* Transmit Waveform test */
+-#define GIGA_CR_1000T_TEST_MODE_2     0x4000  /* Master Transmit Jitter test */
+-#define GIGA_CR_1000T_TEST_MODE_3     0x6000  /* Slave Transmit Jitter test */
+-#define GIGA_CR_1000T_TEST_MODE_4     0x8000  /* Transmitter Distortion test */
+-#define GIGA_CR_1000T_SPEED_MASK      0x0300
+-#define GIGA_CR_1000T_DEFAULT_CAP     0x0300
+-
+-/* PHY Specific Status Register */
+-#define MII_GIGA_PSSR                 0x11
+-#define GIGA_PSSR_SPD_DPLX_RESOLVED   0x0800  /* 1=Speed & Duplex resolved */
+-#define GIGA_PSSR_DPLX                        0x2000  /* 1=Duplex 0=Half Duplex */
+-#define GIGA_PSSR_SPEED                       0xC000  /* Speed, bits 14:15 */
+-#define GIGA_PSSR_10MBS                       0x0000  /* 00=10Mbs */
+-#define GIGA_PSSR_100MBS              0x4000  /* 01=100Mbs */
+-#define GIGA_PSSR_1000MBS             0x8000  /* 10=1000Mbs */
+-
+-/* PHY Interrupt Enable Register */
+-#define MII_IER                               0x12
+-#define IER_LINK_UP                   0x0400
+-#define IER_LINK_DOWN                 0x0800
+-
+-/* PHY Interrupt Status Register */
+-#define MII_ISR                               0x13
+-#define ISR_LINK_UP                   0x0400
+-#define ISR_LINK_DOWN                 0x0800
+-
+-/* Cable-Detect-Test Control Register */
+-#define MII_CDTC                      0x16
+-#define CDTC_EN_OFF                   0   /* sc */
+-#define CDTC_EN_BITS                  1
+-#define CDTC_PAIR_OFF                 8
+-#define CDTC_PAIR_BIT                 2
+-
+-/* Cable-Detect-Test Status Register */
+-#define MII_CDTS                      0x1C
+-#define CDTS_STATUS_OFF                       8
+-#define CDTS_STATUS_BITS              2
+-#define CDTS_STATUS_NORMAL            0
+-#define CDTS_STATUS_SHORT             1
+-#define CDTS_STATUS_OPEN              2
+-#define CDTS_STATUS_INVALID           3
+-
+-#define MII_DBG_ADDR                  0x1D
+-#define MII_DBG_DATA                  0x1E
+-
+-#define MII_ANA_CTRL_0                        0x0
+-#define ANA_RESTART_CAL                       0x0001
+-#define ANA_MANUL_SWICH_ON_SHIFT      0x1
+-#define ANA_MANUL_SWICH_ON_MASK               0xF
+-#define ANA_MAN_ENABLE                        0x0020
+-#define ANA_SEL_HSP                   0x0040
+-#define ANA_EN_HB                     0x0080
+-#define ANA_EN_HBIAS                  0x0100
+-#define ANA_OEN_125M                  0x0200
+-#define ANA_EN_LCKDT                  0x0400
+-#define ANA_LCKDT_PHY                 0x0800
+-#define ANA_AFE_MODE                  0x1000
+-#define ANA_VCO_SLOW                  0x2000
+-#define ANA_VCO_FAST                  0x4000
+-#define ANA_SEL_CLK125M_DSP           0x8000
+-
+-#define MII_ANA_CTRL_4                        0x4
+-#define ANA_IECHO_ADJ_MASK            0xF
+-#define ANA_IECHO_ADJ_3_SHIFT         0
+-#define ANA_IECHO_ADJ_2_SHIFT         4
+-#define ANA_IECHO_ADJ_1_SHIFT         8
+-#define ANA_IECHO_ADJ_0_SHIFT         12
+-
+-#define MII_ANA_CTRL_5                        0x5
+-#define ANA_SERDES_CDR_BW_SHIFT               0
+-#define ANA_SERDES_CDR_BW_MASK                0x3
+-#define ANA_MS_PAD_DBG                        0x0004
+-#define ANA_SPEEDUP_DBG                       0x0008
+-#define ANA_SERDES_TH_LOS_SHIFT               4
+-#define ANA_SERDES_TH_LOS_MASK                0x3
+-#define ANA_SERDES_EN_DEEM            0x0040
+-#define ANA_SERDES_TXELECIDLE         0x0080
+-#define ANA_SERDES_BEACON             0x0100
+-#define ANA_SERDES_HALFTXDR           0x0200
+-#define ANA_SERDES_SEL_HSP            0x0400
+-#define ANA_SERDES_EN_PLL             0x0800
+-#define ANA_SERDES_EN                 0x1000
+-#define ANA_SERDES_EN_LCKDT           0x2000
+-
+-#define MII_ANA_CTRL_11                       0xB
+-#define ANA_PS_HIB_EN                 0x8000
+-
+-#define MII_ANA_CTRL_18                       0x12
+-#define ANA_TEST_MODE_10BT_01SHIFT    0
+-#define ANA_TEST_MODE_10BT_01MASK     0x3
+-#define ANA_LOOP_SEL_10BT             0x0004
+-#define ANA_RGMII_MODE_SW             0x0008
+-#define ANA_EN_LONGECABLE             0x0010
+-#define ANA_TEST_MODE_10BT_2          0x0020
+-#define ANA_EN_10BT_IDLE              0x0400
+-#define ANA_EN_MASK_TB                        0x0800
+-#define ANA_TRIGGER_SEL_TIMER_SHIFT   12
+-#define ANA_TRIGGER_SEL_TIMER_MASK    0x3
+-#define ANA_INTERVAL_SEL_TIMER_SHIFT  14
+-#define ANA_INTERVAL_SEL_TIMER_MASK   0x3
+-
+-#define MII_ANA_CTRL_41                       0x29
+-#define ANA_TOP_PS_EN                 0x8000
+-
+-#define MII_ANA_CTRL_54                       0x36
+-#define ANA_LONG_CABLE_TH_100_SHIFT   0
+-#define ANA_LONG_CABLE_TH_100_MASK    0x3F
+-#define ANA_DESERVED                  0x0040
+-#define ANA_EN_LIT_CH                 0x0080
+-#define ANA_SHORT_CABLE_TH_100_SHIFT  8
+-#define ANA_SHORT_CABLE_TH_100_MASK   0x3F
+-#define ANA_BP_BAD_LINK_ACCUM         0x4000
+-#define ANA_BP_SMALL_BW                       0x8000
+-
+-#endif /*_ATL1C_HW_H_*/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/atl1c_main.c linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_main.c
+--- linux-2.6.29.owrt/drivers/net/atl1c/atl1c_main.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/atl1c_main.c       1970-01-01 01:00:00.000000000 +0100
+@@ -1,2797 +0,0 @@
+-/*
+- * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+- *
+- * Derived from Intel e1000 driver
+- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- */
+-
+-#include "atl1c.h"
+-
+-#define ATL1C_DRV_VERSION "1.0.0.1-NAPI"
+-char atl1c_driver_name[] = "atl1c";
+-char atl1c_driver_version[] = ATL1C_DRV_VERSION;
+-#define PCI_DEVICE_ID_ATTANSIC_L2C      0x1062
+-#define PCI_DEVICE_ID_ATTANSIC_L1C      0x1063
+-/*
+- * atl1c_pci_tbl - PCI Device ID Table
+- *
+- * Wildcard entries (PCI_ANY_ID) should come last
+- * Last entry must be all 0s
+- *
+- * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+- *   Class, Class Mask, private data (not used) }
+- */
+-static struct pci_device_id atl1c_pci_tbl[] = {
+-      {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
+-      {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
+-      /* required last entry */
+-      { 0 }
+-};
+-MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
+-
+-MODULE_AUTHOR("Jie Yang <jie.yang@atheros.com>");
+-MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
+-MODULE_LICENSE("GPL");
+-MODULE_VERSION(ATL1C_DRV_VERSION);
+-
+-static int atl1c_stop_mac(struct atl1c_hw *hw);
+-static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw);
+-static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw);
+-static void atl1c_disable_l0s_l1(struct atl1c_hw *hw);
+-static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup);
+-static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter);
+-static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
+-                 int *work_done, int work_to_do);
+-
+-static const u16 atl1c_pay_load_size[] = {
+-      128, 256, 512, 1024, 2048, 4096,
+-};
+-
+-static const u16 atl1c_rfd_prod_idx_regs[AT_MAX_RECEIVE_QUEUE] =
+-{
+-      REG_MB_RFD0_PROD_IDX,
+-      REG_MB_RFD1_PROD_IDX,
+-      REG_MB_RFD2_PROD_IDX,
+-      REG_MB_RFD3_PROD_IDX
+-};
+-
+-static const u16 atl1c_rfd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] =
+-{
+-      REG_RFD0_HEAD_ADDR_LO,
+-      REG_RFD1_HEAD_ADDR_LO,
+-      REG_RFD2_HEAD_ADDR_LO,
+-      REG_RFD3_HEAD_ADDR_LO
+-};
+-
+-static const u16 atl1c_rrd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] =
+-{
+-      REG_RRD0_HEAD_ADDR_LO,
+-      REG_RRD1_HEAD_ADDR_LO,
+-      REG_RRD2_HEAD_ADDR_LO,
+-      REG_RRD3_HEAD_ADDR_LO
+-};
+-
+-static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+-      NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
+-
+-/*
+- * atl1c_init_pcie - init PCIE module
+- */
+-static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag)
+-{
+-      u32 data;
+-      u32 pci_cmd;
+-      struct pci_dev *pdev = hw->adapter->pdev;
+-
+-      AT_READ_REG(hw, PCI_COMMAND, &pci_cmd);
+-      pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+-      pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+-              PCI_COMMAND_IO);
+-      AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd);
+-
+-      /*
+-       * Clear any PowerSaveing Settings
+-       */
+-      pci_enable_wake(pdev, PCI_D3hot, 0);
+-      pci_enable_wake(pdev, PCI_D3cold, 0);
+-
+-      /*
+-       * Mask some pcie error bits
+-       */
+-      AT_READ_REG(hw, REG_PCIE_UC_SEVERITY, &data);
+-      data &= ~PCIE_UC_SERVRITY_DLP;
+-      data &= ~PCIE_UC_SERVRITY_FCP;
+-      AT_WRITE_REG(hw, REG_PCIE_UC_SEVERITY, data);
+-
+-      if (flag & ATL1C_PCIE_L0S_L1_DISABLE)
+-              atl1c_disable_l0s_l1(hw);
+-      if (flag & ATL1C_PCIE_PHY_RESET)
+-              AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
+-      else
+-              AT_WRITE_REG(hw, REG_GPHY_CTRL,
+-                      GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET);
+-
+-      msleep(1);
+-}
+-
+-/*
+- * atl1c_irq_enable - Enable default interrupt generation settings
+- * @adapter: board private structure
+- */
+-static inline void atl1c_irq_enable(struct atl1c_adapter *adapter)
+-{
+-      if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
+-              AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF);
+-              AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
+-              AT_WRITE_FLUSH(&adapter->hw);
+-      }
+-}
+-
+-/*
+- * atl1c_irq_disable - Mask off interrupt generation on the NIC
+- * @adapter: board private structure
+- */
+-static inline void atl1c_irq_disable(struct atl1c_adapter *adapter)
+-{
+-      atomic_inc(&adapter->irq_sem);
+-      AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+-      AT_WRITE_FLUSH(&adapter->hw);
+-      synchronize_irq(adapter->pdev->irq);
+-}
+-
+-/*
+- * atl1c_irq_reset - reset interrupt confiure on the NIC
+- * @adapter: board private structure
+- */
+-static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
+-{
+-      atomic_set(&adapter->irq_sem, 1);
+-      atl1c_irq_enable(adapter);
+-}
+-
+-/*
+- * atl1c_phy_config - Timer Call-back
+- * @data: pointer to netdev cast into an unsigned long
+- */
+-static void atl1c_phy_config(unsigned long data)
+-{
+-      struct atl1c_adapter *adapter = (struct atl1c_adapter *) data;
+-      struct atl1c_hw *hw = &adapter->hw;
+-      unsigned long flags;
+-
+-      spin_lock_irqsave(&adapter->mdio_lock, flags);
+-      atl1c_restart_autoneg(hw);
+-      spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+-}
+-
+-void atl1c_reinit_locked(struct atl1c_adapter *adapter)
+-{
+-
+-      WARN_ON(in_interrupt());
+-      atl1c_down(adapter);
+-      atl1c_up(adapter);
+-      clear_bit(__AT_RESETTING, &adapter->flags);
+-}
+-
+-static void atl1c_reset_task(struct work_struct *work)
+-{
+-      struct atl1c_adapter *adapter;
+-      struct net_device *netdev;
+-
+-      adapter = container_of(work, struct atl1c_adapter, reset_task);
+-      netdev = adapter->netdev;
+-
+-      netif_device_detach(netdev);
+-      atl1c_down(adapter);
+-      atl1c_up(adapter);
+-      netif_device_attach(netdev);
+-}
+-
+-static void atl1c_check_link_status(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      struct net_device *netdev = adapter->netdev;
+-      struct pci_dev    *pdev   = adapter->pdev;
+-      int err;
+-      unsigned long flags;
+-      u16 speed, duplex, phy_data;
+-
+-      spin_lock_irqsave(&adapter->mdio_lock, flags);
+-      /* MII_BMSR must read twise */
+-      atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+-      atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+-      spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+-
+-      if ((phy_data & BMSR_LSTATUS) == 0) {
+-              /* link down */
+-              if (netif_carrier_ok(netdev)) {
+-                      hw->hibernate = true;
+-                      atl1c_set_aspm(hw, false);
+-                      if (atl1c_stop_mac(hw) != 0)
+-                              if (netif_msg_hw(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "stop mac failed\n");
+-              }
+-              netif_carrier_off(netdev);
+-      } else {
+-              /* Link Up */
+-              hw->hibernate = false;
+-              spin_lock_irqsave(&adapter->mdio_lock, flags);
+-              err = atl1c_get_speed_and_duplex(hw, &speed, &duplex);
+-              spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+-              if (unlikely(err))
+-                      return;
+-              /* link result is our setting */
+-              if (adapter->link_speed != speed ||
+-                  adapter->link_duplex != duplex) {
+-                      adapter->link_speed  = speed;
+-                      adapter->link_duplex = duplex;
+-                      atl1c_enable_tx_ctrl(hw);
+-                      atl1c_enable_rx_ctrl(hw);
+-                      atl1c_setup_mac_ctrl(adapter);
+-                      atl1c_set_aspm(hw, true);
+-                      if (netif_msg_link(adapter))
+-                              dev_info(&pdev->dev,
+-                                      "%s: %s NIC Link is Up<%d Mbps %s>\n",
+-                                      atl1c_driver_name, netdev->name,
+-                                      adapter->link_speed,
+-                                      adapter->link_duplex == FULL_DUPLEX ?
+-                                      "Full Duplex" : "Half Duplex");
+-              }
+-              if (!netif_carrier_ok(netdev))
+-                      netif_carrier_on(netdev);
+-      }
+-}
+-
+-/*
+- * atl1c_link_chg_task - deal with link change event Out of interrupt context
+- * @netdev: network interface device structure
+- */
+-static void atl1c_link_chg_task(struct work_struct *work)
+-{
+-      struct atl1c_adapter *adapter;
+-
+-      adapter = container_of(work, struct atl1c_adapter, link_chg_task);
+-      atl1c_check_link_status(adapter);
+-}
+-
+-static void atl1c_link_chg_event(struct atl1c_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-      struct pci_dev    *pdev   = adapter->pdev;
+-      u16 phy_data;
+-      u16 link_up;
+-
+-      spin_lock(&adapter->mdio_lock);
+-      atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+-      atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+-      spin_unlock(&adapter->mdio_lock);
+-      link_up = phy_data & BMSR_LSTATUS;
+-      /* notify upper layer link down ASAP */
+-      if (!link_up) {
+-              if (netif_carrier_ok(netdev)) {
+-                      /* old link state: Up */
+-                      netif_carrier_off(netdev);
+-                      if (netif_msg_link(adapter))
+-                              dev_info(&pdev->dev,
+-                                      "%s: %s NIC Link is Down\n",
+-                                      atl1c_driver_name, netdev->name);
+-                      adapter->link_speed = SPEED_0;
+-              }
+-      }
+-      schedule_work(&adapter->link_chg_task);
+-}
+-
+-static void atl1c_del_timer(struct atl1c_adapter *adapter)
+-{
+-      del_timer_sync(&adapter->phy_config_timer);
+-}
+-
+-static void atl1c_cancel_work(struct atl1c_adapter *adapter)
+-{
+-      cancel_work_sync(&adapter->reset_task);
+-      cancel_work_sync(&adapter->link_chg_task);
+-}
+-
+-/*
+- * atl1c_tx_timeout - Respond to a Tx Hang
+- * @netdev: network interface device structure
+- */
+-static void atl1c_tx_timeout(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      /* Do the reset outside of interrupt context */
+-      schedule_work(&adapter->reset_task);
+-}
+-
+-/*
+- * atl1c_set_multi - Multicast and Promiscuous mode set
+- * @netdev: network interface device structure
+- *
+- * The set_multi entry point is called whenever the multicast address
+- * list or the network interface flags are updated.  This routine is
+- * responsible for configuring the hardware for proper multicast,
+- * promiscuous mode, and all-multi behavior.
+- */
+-static void atl1c_set_multi(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-      struct dev_mc_list *mc_ptr;
+-      u32 mac_ctrl_data;
+-      u32 hash_value;
+-
+-      /* Check for Promiscuous and All Multicast modes */
+-      AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
+-
+-      if (netdev->flags & IFF_PROMISC) {
+-              mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+-      } else if (netdev->flags & IFF_ALLMULTI) {
+-              mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+-              mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN;
+-      } else {
+-              mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+-      }
+-
+-      AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+-
+-      /* clear the old settings from the multicast hash table */
+-      AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+-      AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+-
+-      /* comoute mc addresses' hash value ,and put it into hash table */
+-      for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+-              hash_value = atl1c_hash_mc_addr(hw, mc_ptr->dmi_addr);
+-              atl1c_hash_set(hw, hash_value);
+-      }
+-}
+-
+-static void atl1c_vlan_rx_register(struct net_device *netdev,
+-                                 struct vlan_group *grp)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct pci_dev *pdev = adapter->pdev;
+-      u32 mac_ctrl_data = 0;
+-
+-      if (netif_msg_pktdata(adapter))
+-              dev_dbg(&pdev->dev, "atl1c_vlan_rx_register\n");
+-
+-      atl1c_irq_disable(adapter);
+-
+-      adapter->vlgrp = grp;
+-      AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data);
+-
+-      if (grp) {
+-              /* enable VLAN tag insert/strip */
+-              mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+-      } else {
+-              /* disable VLAN tag insert/strip */
+-              mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN;
+-      }
+-
+-      AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
+-      atl1c_irq_enable(adapter);
+-}
+-
+-static void atl1c_restore_vlan(struct atl1c_adapter *adapter)
+-{
+-      struct pci_dev *pdev = adapter->pdev;
+-
+-      if (netif_msg_pktdata(adapter))
+-              dev_dbg(&pdev->dev, "atl1c_restore_vlan !");
+-      atl1c_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+-}
+-/*
+- * atl1c_set_mac - Change the Ethernet Address of the NIC
+- * @netdev: network interface device structure
+- * @p: pointer to an address structure
+- *
+- * Returns 0 on success, negative on failure
+- */
+-static int atl1c_set_mac_addr(struct net_device *netdev, void *p)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct sockaddr *addr = p;
+-
+-      if (!is_valid_ether_addr(addr->sa_data))
+-              return -EADDRNOTAVAIL;
+-
+-      if (netif_running(netdev))
+-              return -EBUSY;
+-
+-      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+-      memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+-
+-      atl1c_hw_set_mac_addr(&adapter->hw);
+-
+-      return 0;
+-}
+-
+-static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
+-                              struct net_device *dev)
+-{
+-      int mtu = dev->mtu;
+-
+-      adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
+-              roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
+-}
+-/*
+- * atl1c_change_mtu - Change the Maximum Transfer Unit
+- * @netdev: network interface device structure
+- * @new_mtu: new value for maximum frame size
+- *
+- * Returns 0 on success, negative on failure
+- */
+-static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      int old_mtu   = netdev->mtu;
+-      int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+-
+-      if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+-                      (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+-              if (netif_msg_link(adapter))
+-                      dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+-              return -EINVAL;
+-      }
+-      /* set MTU */
+-      if (old_mtu != new_mtu && netif_running(netdev)) {
+-              while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+-                      msleep(1);
+-              netdev->mtu = new_mtu;
+-              adapter->hw.max_frame_size = new_mtu;
+-              atl1c_set_rxbufsize(adapter, netdev);
+-              atl1c_down(adapter);
+-              atl1c_up(adapter);
+-              clear_bit(__AT_RESETTING, &adapter->flags);
+-              if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
+-                      u32 phy_data;
+-
+-                      AT_READ_REG(&adapter->hw, 0x1414, &phy_data);
+-                      phy_data |= 0x10000000;
+-                      AT_WRITE_REG(&adapter->hw, 0x1414, phy_data);
+-              }
+-
+-      }
+-      return 0;
+-}
+-
+-/*
+- *  caller should hold mdio_lock
+- */
+-static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      u16 result;
+-
+-      atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result);
+-      return result;
+-}
+-
+-static void atl1c_mdio_write(struct net_device *netdev, int phy_id,
+-                           int reg_num, int val)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val);
+-}
+-
+-/*
+- * atl1c_mii_ioctl -
+- * @netdev:
+- * @ifreq:
+- * @cmd:
+- */
+-static int atl1c_mii_ioctl(struct net_device *netdev,
+-                         struct ifreq *ifr, int cmd)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct mii_ioctl_data *data = if_mii(ifr);
+-      unsigned long flags;
+-      int retval = 0;
+-
+-      if (!netif_running(netdev))
+-              return -EINVAL;
+-
+-      spin_lock_irqsave(&adapter->mdio_lock, flags);
+-      switch (cmd) {
+-      case SIOCGMIIPHY:
+-              data->phy_id = 0;
+-              break;
+-
+-      case SIOCGMIIREG:
+-              if (!capable(CAP_NET_ADMIN)) {
+-                      retval = -EPERM;
+-                      goto out;
+-              }
+-              if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+-                                  &data->val_out)) {
+-                      retval = -EIO;
+-                      goto out;
+-              }
+-              break;
+-
+-      case SIOCSMIIREG:
+-              if (!capable(CAP_NET_ADMIN)) {
+-                      retval = -EPERM;
+-                      goto out;
+-              }
+-              if (data->reg_num & ~(0x1F)) {
+-                      retval = -EFAULT;
+-                      goto out;
+-              }
+-
+-              dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x",
+-                              data->reg_num, data->val_in);
+-              if (atl1c_write_phy_reg(&adapter->hw,
+-                                   data->reg_num, data->val_in)) {
+-                      retval = -EIO;
+-                      goto out;
+-              }
+-              break;
+-
+-      default:
+-              retval = -EOPNOTSUPP;
+-              break;
+-      }
+-out:
+-      spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+-      return retval;
+-}
+-
+-/*
+- * atl1c_ioctl -
+- * @netdev:
+- * @ifreq:
+- * @cmd:
+- */
+-static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+-{
+-      switch (cmd) {
+-      case SIOCGMIIPHY:
+-      case SIOCGMIIREG:
+-      case SIOCSMIIREG:
+-              return atl1c_mii_ioctl(netdev, ifr, cmd);
+-      default:
+-              return -EOPNOTSUPP;
+-      }
+-}
+-
+-/*
+- * atl1c_alloc_queues - Allocate memory for all rings
+- * @adapter: board private structure to initialize
+- *
+- */
+-static int __devinit atl1c_alloc_queues(struct atl1c_adapter *adapter)
+-{
+-      return 0;
+-}
+-
+-static void atl1c_set_mac_type(struct atl1c_hw *hw)
+-{
+-      switch (hw->device_id) {
+-      case PCI_DEVICE_ID_ATTANSIC_L2C:
+-              hw->nic_type = athr_l2c;
+-              break;
+-
+-      case PCI_DEVICE_ID_ATTANSIC_L1C:
+-              hw->nic_type = athr_l1c;
+-              break;
+-
+-      default:
+-              break;
+-      }
+-}
+-
+-static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
+-{
+-      u32 phy_status_data;
+-      u32 link_ctrl_data;
+-
+-      atl1c_set_mac_type(hw);
+-      AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data);
+-      AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
+-
+-      hw->ctrl_flags = ATL1C_INTR_CLEAR_ON_READ |
+-                       ATL1C_INTR_MODRT_ENABLE  |
+-                       ATL1C_RX_IPV6_CHKSUM     |
+-                       ATL1C_TXQ_MODE_ENHANCE;
+-      if (link_ctrl_data & LINK_CTRL_L0S_EN)
+-              hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT;
+-      if (link_ctrl_data & LINK_CTRL_L1_EN)
+-              hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT;
+-
+-      if (hw->nic_type == athr_l1c) {
+-              hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON;
+-              hw->ctrl_flags |= ATL1C_LINK_CAP_1000M;
+-      }
+-      return 0;
+-}
+-/*
+- * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter)
+- * @adapter: board private structure to initialize
+- *
+- * atl1c_sw_init initializes the Adapter private data structure.
+- * Fields are initialized based on PCI device information and
+- * OS network device settings (MTU size).
+- */
+-static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw   = &adapter->hw;
+-      struct pci_dev  *pdev = adapter->pdev;
+-
+-      adapter->wol = 0;
+-      adapter->link_speed = SPEED_0;
+-      adapter->link_duplex = FULL_DUPLEX;
+-      adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
+-      adapter->tpd_ring[0].count = 1024;
+-      adapter->rfd_ring[0].count = 512;
+-
+-      hw->vendor_id = pdev->vendor;
+-      hw->device_id = pdev->device;
+-      hw->subsystem_vendor_id = pdev->subsystem_vendor;
+-      hw->subsystem_id = pdev->subsystem_device;
+-
+-      /* before link up, we assume hibernate is true */
+-      hw->hibernate = true;
+-      hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
+-      if (atl1c_setup_mac_funcs(hw) != 0) {
+-              dev_err(&pdev->dev, "set mac function pointers failed\n");
+-              return -1;
+-      }
+-      hw->intr_mask = IMR_NORMAL_MASK;
+-      hw->phy_configured = false;
+-      hw->preamble_len = 7;
+-      hw->max_frame_size = adapter->netdev->mtu;
+-      if (adapter->num_rx_queues < 2) {
+-              hw->rss_type = atl1c_rss_disable;
+-              hw->rss_mode = atl1c_rss_mode_disable;
+-      } else {
+-              hw->rss_type = atl1c_rss_ipv4;
+-              hw->rss_mode = atl1c_rss_mul_que_mul_int;
+-              hw->rss_hash_bits = 16;
+-      }
+-      hw->autoneg_advertised = ADVERTISED_Autoneg;
+-      hw->indirect_tab = 0xE4E4E4E4;
+-      hw->base_cpu = 0;
+-
+-      hw->ict = 50000;                /* 100ms */
+-      hw->smb_timer = 200000;         /* 400ms */
+-      hw->cmb_tpd = 4;
+-      hw->cmb_tx_timer = 1;           /* 2 us  */
+-      hw->rx_imt = 200;
+-      hw->tx_imt = 1000;
+-
+-      hw->tpd_burst = 5;
+-      hw->rfd_burst = 8;
+-      hw->dma_order = atl1c_dma_ord_out;
+-      hw->dmar_block = atl1c_dma_req_1024;
+-      hw->dmaw_block = atl1c_dma_req_1024;
+-      hw->dmar_dly_cnt = 15;
+-      hw->dmaw_dly_cnt = 4;
+-
+-      if (atl1c_alloc_queues(adapter)) {
+-              dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+-              return -ENOMEM;
+-      }
+-      /* TODO */
+-      atl1c_set_rxbufsize(adapter, adapter->netdev);
+-      atomic_set(&adapter->irq_sem, 1);
+-      spin_lock_init(&adapter->mdio_lock);
+-      spin_lock_init(&adapter->tx_lock);
+-      set_bit(__AT_DOWN, &adapter->flags);
+-
+-      return 0;
+-}
+-
+-/*
+- * atl1c_clean_tx_ring - Free Tx-skb
+- * @adapter: board private structure
+- */
+-static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter,
+-                              enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+-      struct atl1c_buffer *buffer_info;
+-      struct pci_dev *pdev = adapter->pdev;
+-      u16 index, ring_count;
+-
+-      ring_count = tpd_ring->count;
+-      for (index = 0; index < ring_count; index++) {
+-              buffer_info = &tpd_ring->buffer_info[index];
+-              if (buffer_info->state == ATL1_BUFFER_FREE)
+-                      continue;
+-              if (buffer_info->dma)
+-                      pci_unmap_single(pdev, buffer_info->dma,
+-                                      buffer_info->length,
+-                                      PCI_DMA_TODEVICE);
+-              if (buffer_info->skb)
+-                      dev_kfree_skb(buffer_info->skb);
+-              buffer_info->dma = 0;
+-              buffer_info->skb = NULL;
+-              buffer_info->state = ATL1_BUFFER_FREE;
+-      }
+-
+-      /* Zero out Tx-buffers */
+-      memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) *
+-                              ring_count);
+-      atomic_set(&tpd_ring->next_to_clean, 0);
+-      tpd_ring->next_to_use = 0;
+-}
+-
+-/*
+- * atl1c_clean_rx_ring - Free rx-reservation skbs
+- * @adapter: board private structure
+- */
+-static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+-      struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+-      struct atl1c_buffer *buffer_info;
+-      struct pci_dev *pdev = adapter->pdev;
+-      int i, j;
+-
+-      for (i = 0; i < adapter->num_rx_queues; i++) {
+-              for (j = 0; j < rfd_ring[i].count; j++) {
+-                      buffer_info = &rfd_ring[i].buffer_info[j];
+-                      if (buffer_info->state == ATL1_BUFFER_FREE)
+-                              continue;
+-                      if (buffer_info->dma)
+-                              pci_unmap_single(pdev, buffer_info->dma,
+-                                              buffer_info->length,
+-                                              PCI_DMA_FROMDEVICE);
+-                      if (buffer_info->skb)
+-                              dev_kfree_skb(buffer_info->skb);
+-                      buffer_info->state = ATL1_BUFFER_FREE;
+-                      buffer_info->skb = NULL;
+-              }
+-              /* zero out the descriptor ring */
+-              memset(rfd_ring[i].desc, 0, rfd_ring[i].size);
+-              rfd_ring[i].next_to_clean = 0;
+-              rfd_ring[i].next_to_use = 0;
+-              rrd_ring[i].next_to_use = 0;
+-              rrd_ring[i].next_to_clean = 0;
+-      }
+-}
+-
+-/*
+- * Read / Write Ptr Initialize:
+- */
+-static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+-      struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+-      struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+-      struct atl1c_buffer *buffer_info;
+-      int i, j;
+-
+-      for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+-              tpd_ring[i].next_to_use = 0;
+-              atomic_set(&tpd_ring[i].next_to_clean, 0);
+-              buffer_info = tpd_ring[i].buffer_info;
+-              for (j = 0; j < tpd_ring->count; j++)
+-                      buffer_info[i].state = ATL1_BUFFER_FREE;
+-      }
+-      for (i = 0; i < adapter->num_rx_queues; i++) {
+-              rfd_ring[i].next_to_use = 0;
+-              rfd_ring[i].next_to_clean = 0;
+-              rrd_ring[i].next_to_use = 0;
+-              rrd_ring[i].next_to_clean = 0;
+-              for (j = 0; j < rfd_ring[i].count; j++) {
+-                      buffer_info = &rfd_ring[i].buffer_info[j];
+-                      buffer_info->state = ATL1_BUFFER_FREE;
+-              }
+-      }
+-}
+-
+-/*
+- * atl1c_free_ring_resources - Free Tx / RX descriptor Resources
+- * @adapter: board private structure
+- *
+- * Free all transmit software resources
+- */
+-static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
+-{
+-      struct pci_dev *pdev = adapter->pdev;
+-
+-      pci_free_consistent(pdev, adapter->ring_header.size,
+-                                      adapter->ring_header.desc,
+-                                      adapter->ring_header.dma);
+-      adapter->ring_header.desc = NULL;
+-
+-      /* Note: just free tdp_ring.buffer_info,
+-      *  it contain rfd_ring.buffer_info, do not double free */
+-      if (adapter->tpd_ring[0].buffer_info) {
+-              kfree(adapter->tpd_ring[0].buffer_info);
+-              adapter->tpd_ring[0].buffer_info = NULL;
+-      }
+-}
+-
+-/*
+- * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources
+- * @adapter: board private structure
+- *
+- * Return 0 on success, negative on failure
+- */
+-static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
+-{
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+-      struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+-      struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+-      struct atl1c_ring_header *ring_header = &adapter->ring_header;
+-      int num_rx_queues = adapter->num_rx_queues;
+-      int size;
+-      int i;
+-      int count = 0;
+-      int rx_desc_count = 0;
+-      u32 offset = 0;
+-
+-      rrd_ring[0].count = rfd_ring[0].count;
+-      for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++)
+-              tpd_ring[i].count = tpd_ring[0].count;
+-
+-      for (i = 1; i < adapter->num_rx_queues; i++)
+-              rfd_ring[i].count = rrd_ring[i].count = rfd_ring[0].count;
+-
+-      /* 2 tpd queue, one high priority queue,
+-       * another normal priority queue */
+-      size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 +
+-              rfd_ring->count * num_rx_queues);
+-      tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
+-      if (unlikely(!tpd_ring->buffer_info)) {
+-              dev_err(&pdev->dev, "kzalloc failed, size = %d\n",
+-                      size);
+-              goto err_nomem;
+-      }
+-      for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+-              tpd_ring[i].buffer_info =
+-                      (struct atl1c_buffer *) (tpd_ring->buffer_info + count);
+-              count += tpd_ring[i].count;
+-      }
+-
+-      for (i = 0; i < num_rx_queues; i++) {
+-              rfd_ring[i].buffer_info =
+-                      (struct atl1c_buffer *) (tpd_ring->buffer_info + count);
+-              count += rfd_ring[i].count;
+-              rx_desc_count += rfd_ring[i].count;
+-      }
+-      /*
+-       * real ring DMA buffer
+-       * each ring/block may need up to 8 bytes for alignment, hence the
+-       * additional bytes tacked onto the end.
+-       */
+-      ring_header->size = size =
+-              sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 +
+-              sizeof(struct atl1c_rx_free_desc) * rx_desc_count +
+-              sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
+-              sizeof(struct atl1c_hw_stats) +
+-              8 * 4 + 8 * 2 * num_rx_queues;
+-
+-      ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
+-                              &ring_header->dma);
+-      if (unlikely(!ring_header->desc)) {
+-              dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
+-              goto err_nomem;
+-      }
+-      memset(ring_header->desc, 0, ring_header->size);
+-      /* init TPD ring */
+-
+-      tpd_ring[0].dma = roundup(ring_header->dma, 8);
+-      offset = tpd_ring[0].dma - ring_header->dma;
+-      for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+-              tpd_ring[i].dma = ring_header->dma + offset;
+-              tpd_ring[i].desc = (u8 *) ring_header->desc + offset;
+-              tpd_ring[i].size =
+-                      sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count;
+-              offset += roundup(tpd_ring[i].size, 8);
+-      }
+-      /* init RFD ring */
+-      for (i = 0; i < num_rx_queues; i++) {
+-              rfd_ring[i].dma = ring_header->dma + offset;
+-              rfd_ring[i].desc = (u8 *) ring_header->desc + offset;
+-              rfd_ring[i].size = sizeof(struct atl1c_rx_free_desc) *
+-                              rfd_ring[i].count;
+-              offset += roundup(rfd_ring[i].size, 8);
+-      }
+-
+-      /* init RRD ring */
+-      for (i = 0; i < num_rx_queues; i++) {
+-              rrd_ring[i].dma = ring_header->dma + offset;
+-              rrd_ring[i].desc = (u8 *) ring_header->desc + offset;
+-              rrd_ring[i].size = sizeof(struct atl1c_recv_ret_status) *
+-                              rrd_ring[i].count;
+-              offset += roundup(rrd_ring[i].size, 8);
+-      }
+-
+-      adapter->smb.dma = ring_header->dma + offset;
+-      adapter->smb.smb = (u8 *)ring_header->desc + offset;
+-      return 0;
+-
+-err_nomem:
+-      kfree(tpd_ring->buffer_info);
+-      return -ENOMEM;
+-}
+-
+-static void atl1c_configure_des_ring(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      struct atl1c_rfd_ring *rfd_ring = (struct atl1c_rfd_ring *)
+-                              adapter->rfd_ring;
+-      struct atl1c_rrd_ring *rrd_ring = (struct atl1c_rrd_ring *)
+-                              adapter->rrd_ring;
+-      struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
+-                              adapter->tpd_ring;
+-      struct atl1c_cmb *cmb = (struct atl1c_cmb *) &adapter->cmb;
+-      struct atl1c_smb *smb = (struct atl1c_smb *) &adapter->smb;
+-      int i;
+-
+-      /* TPD */
+-      AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI,
+-                      (u32)((tpd_ring[atl1c_trans_normal].dma &
+-                              AT_DMA_HI_ADDR_MASK) >> 32));
+-      /* just enable normal priority TX queue */
+-      AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO,
+-                      (u32)(tpd_ring[atl1c_trans_normal].dma &
+-                              AT_DMA_LO_ADDR_MASK));
+-      AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO,
+-                      (u32)(tpd_ring[atl1c_trans_high].dma &
+-                              AT_DMA_LO_ADDR_MASK));
+-      AT_WRITE_REG(hw, REG_TPD_RING_SIZE,
+-                      (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK));
+-
+-
+-      /* RFD */
+-      AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI,
+-                      (u32)((rfd_ring[0].dma & AT_DMA_HI_ADDR_MASK) >> 32));
+-      for (i = 0; i < adapter->num_rx_queues; i++)
+-              AT_WRITE_REG(hw, atl1c_rfd_addr_lo_regs[i],
+-                      (u32)(rfd_ring[i].dma & AT_DMA_LO_ADDR_MASK));
+-
+-      AT_WRITE_REG(hw, REG_RFD_RING_SIZE,
+-                      rfd_ring[0].count & RFD_RING_SIZE_MASK);
+-      AT_WRITE_REG(hw, REG_RX_BUF_SIZE,
+-                      adapter->rx_buffer_len & RX_BUF_SIZE_MASK);
+-
+-      /* RRD */
+-      for (i = 0; i < adapter->num_rx_queues; i++)
+-              AT_WRITE_REG(hw, atl1c_rrd_addr_lo_regs[i],
+-                      (u32)(rrd_ring[i].dma & AT_DMA_LO_ADDR_MASK));
+-      AT_WRITE_REG(hw, REG_RRD_RING_SIZE,
+-                      (rrd_ring[0].count & RRD_RING_SIZE_MASK));
+-
+-      /* CMB */
+-      AT_WRITE_REG(hw, REG_CMB_BASE_ADDR_LO, cmb->dma & AT_DMA_LO_ADDR_MASK);
+-
+-      /* SMB */
+-      AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_HI,
+-                      (u32)((smb->dma & AT_DMA_HI_ADDR_MASK) >> 32));
+-      AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_LO,
+-                      (u32)(smb->dma & AT_DMA_LO_ADDR_MASK));
+-      /* Load all of base address above */
+-      AT_WRITE_REG(hw, REG_LOAD_PTR, 1);
+-}
+-
+-static void atl1c_configure_tx(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 dev_ctrl_data;
+-      u32 max_pay_load;
+-      u16 tx_offload_thresh;
+-      u32 txq_ctrl_data;
+-      u32 extra_size = 0;     /* Jumbo frame threshold in QWORD unit */
+-
+-      extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
+-      tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
+-      AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
+-              (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
+-      AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data);
+-      max_pay_load  = (dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT) &
+-                      DEVICE_CTRL_MAX_PAYLOAD_MASK;
+-      hw->dmaw_block = min(max_pay_load, hw->dmaw_block);
+-      max_pay_load  = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) &
+-                      DEVICE_CTRL_MAX_RREQ_SZ_MASK;
+-      hw->dmar_block = min(max_pay_load, hw->dmar_block);
+-
+-      txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) <<
+-                      TXQ_NUM_TPD_BURST_SHIFT;
+-      if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE)
+-              txq_ctrl_data |= TXQ_CTRL_ENH_MODE;
+-      txq_ctrl_data |= (atl1c_pay_load_size[hw->dmar_block] &
+-                      TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT;
+-
+-      AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data);
+-}
+-
+-static void atl1c_configure_rx(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 rxq_ctrl_data;
+-
+-      rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) <<
+-                      RXQ_RFD_BURST_NUM_SHIFT;
+-
+-      if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM)
+-              rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN;
+-      if (hw->rss_type == atl1c_rss_ipv4)
+-              rxq_ctrl_data |= RSS_HASH_IPV4;
+-      if (hw->rss_type == atl1c_rss_ipv4_tcp)
+-              rxq_ctrl_data |= RSS_HASH_IPV4_TCP;
+-      if (hw->rss_type == atl1c_rss_ipv6)
+-              rxq_ctrl_data |= RSS_HASH_IPV6;
+-      if (hw->rss_type == atl1c_rss_ipv6_tcp)
+-              rxq_ctrl_data |= RSS_HASH_IPV6_TCP;
+-      if (hw->rss_type != atl1c_rss_disable)
+-              rxq_ctrl_data |= RRS_HASH_CTRL_EN;
+-
+-      rxq_ctrl_data |= (hw->rss_mode & RSS_MODE_MASK) <<
+-                      RSS_MODE_SHIFT;
+-      rxq_ctrl_data |= (hw->rss_hash_bits & RSS_HASH_BITS_MASK) <<
+-                      RSS_HASH_BITS_SHIFT;
+-      if (hw->ctrl_flags & ATL1C_ASPM_CTRL_MON)
+-              rxq_ctrl_data |= (ASPM_THRUPUT_LIMIT_100M &
+-                      ASPM_THRUPUT_LIMIT_MASK) << ASPM_THRUPUT_LIMIT_SHIFT;
+-
+-      AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data);
+-}
+-
+-static void atl1c_configure_rss(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-
+-      AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab);
+-      AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu);
+-}
+-
+-static void atl1c_configure_dma(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 dma_ctrl_data;
+-
+-      dma_ctrl_data = DMA_CTRL_DMAR_REQ_PRI;
+-      if (hw->ctrl_flags & ATL1C_CMB_ENABLE)
+-              dma_ctrl_data |= DMA_CTRL_CMB_EN;
+-      if (hw->ctrl_flags & ATL1C_SMB_ENABLE)
+-              dma_ctrl_data |= DMA_CTRL_SMB_EN;
+-      else
+-              dma_ctrl_data |= MAC_CTRL_SMB_DIS;
+-
+-      switch (hw->dma_order) {
+-      case atl1c_dma_ord_in:
+-              dma_ctrl_data |= DMA_CTRL_DMAR_IN_ORDER;
+-              break;
+-      case atl1c_dma_ord_enh:
+-              dma_ctrl_data |= DMA_CTRL_DMAR_ENH_ORDER;
+-              break;
+-      case atl1c_dma_ord_out:
+-              dma_ctrl_data |= DMA_CTRL_DMAR_OUT_ORDER;
+-              break;
+-      default:
+-              break;
+-      }
+-
+-      dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
+-              << DMA_CTRL_DMAR_BURST_LEN_SHIFT;
+-      dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
+-              << DMA_CTRL_DMAW_BURST_LEN_SHIFT;
+-      dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK)
+-              << DMA_CTRL_DMAR_DLY_CNT_SHIFT;
+-      dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK)
+-              << DMA_CTRL_DMAW_DLY_CNT_SHIFT;
+-
+-      AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data);
+-}
+-
+-/*
+- * Stop the mac, transmit and receive units
+- * hw - Struct containing variables accessed by shared code
+- * return : 0  or  idle status (if error)
+- */
+-static int atl1c_stop_mac(struct atl1c_hw *hw)
+-{
+-      u32 data;
+-      int timeout;
+-
+-      AT_READ_REG(hw, REG_RXQ_CTRL, &data);
+-      data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN |
+-                RXQ3_CTRL_EN | RXQ_CTRL_EN);
+-      AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
+-
+-      AT_READ_REG(hw, REG_TXQ_CTRL, &data);
+-      data &= ~TXQ_CTRL_EN;
+-      AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
+-
+-      for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+-              AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+-              if ((data & (IDLE_STATUS_RXQ_NO_IDLE |
+-                      IDLE_STATUS_TXQ_NO_IDLE)) == 0)
+-                      break;
+-              msleep(1);
+-      }
+-
+-      AT_READ_REG(hw, REG_MAC_CTRL, &data);
+-      data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
+-      AT_WRITE_REG(hw, REG_MAC_CTRL, data);
+-
+-      for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+-              AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+-              if ((data & IDLE_STATUS_MASK) == 0)
+-                      return 0;
+-              msleep(1);
+-      }
+-      return data;
+-}
+-
+-static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
+-{
+-      u32 data;
+-
+-      AT_READ_REG(hw, REG_RXQ_CTRL, &data);
+-      switch (hw->adapter->num_rx_queues) {
+-      case 4:
+-              data |= (RXQ3_CTRL_EN | RXQ2_CTRL_EN | RXQ1_CTRL_EN);
+-              break;
+-      case 3:
+-              data |= (RXQ2_CTRL_EN | RXQ1_CTRL_EN);
+-              break;
+-      case 2:
+-              data |= RXQ1_CTRL_EN;
+-              break;
+-      default:
+-              break;
+-      }
+-      data |= RXQ_CTRL_EN;
+-      AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
+-}
+-
+-static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw)
+-{
+-      u32 data;
+-
+-      AT_READ_REG(hw, REG_TXQ_CTRL, &data);
+-      data |= TXQ_CTRL_EN;
+-      AT_WRITE_REG(hw, REG_TXQ_CTRL, data);
+-}
+-
+-/*
+- * Reset the transmit and receive units; mask and clear all interrupts.
+- * hw - Struct containing variables accessed by shared code
+- * return : 0  or  idle status (if error)
+- */
+-static int atl1c_reset_mac(struct atl1c_hw *hw)
+-{
+-      struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
+-      struct pci_dev *pdev = adapter->pdev;
+-      u32 idle_status_data = 0;
+-      int timeout = 0;
+-      int ret;
+-
+-      AT_WRITE_REG(hw, REG_IMR, 0);
+-      AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT);
+-
+-      ret = atl1c_stop_mac(hw);
+-      if (ret)
+-              return ret;
+-      /*
+-       * Issue Soft Reset to the MAC.  This will reset the chip's
+-       * transmit, receive, DMA.  It will not effect
+-       * the current PCI configuration.  The global reset bit is self-
+-       * clearing, and should clear within a microsecond.
+-       */
+-      AT_WRITE_REGW(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
+-      AT_WRITE_FLUSH(hw);
+-      msleep(10);
+-      /* Wait at least 10ms for All module to be Idle */
+-      for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+-              AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data);
+-              if ((idle_status_data & IDLE_STATUS_MASK) == 0)
+-                      break;
+-              msleep(1);
+-      }
+-      if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+-              dev_err(&pdev->dev,
+-                      "MAC state machine cann't be idle since"
+-                      " disabled for 10ms second\n");
+-              return -1;
+-      }
+-      return 0;
+-}
+-
+-static void atl1c_disable_l0s_l1(struct atl1c_hw *hw)
+-{
+-      u32 pm_ctrl_data;
+-
+-      AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
+-      pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
+-                      PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+-      pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+-      pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+-      pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+-      pm_ctrl_data &= ~PM_CTRL_MAC_ASPM_CHK;
+-      pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
+-
+-      pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+-      pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
+-      pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
+-      AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data);
+-}
+-
+-/*
+- * Set ASPM state.
+- * Enable/disable L0s/L1 depend on link state.
+- */
+-static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
+-{
+-      u32 pm_ctrl_data;
+-
+-      AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
+-
+-      pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1;
+-      pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+-      pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN;
+-      pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
+-                      PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+-
+-      pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK;
+-
+-      if (linkup) {
+-              pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
+-              pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+-
+-              if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) {
+-                      pm_ctrl_data |= AT_ASPM_L1_TIMER <<
+-                              PM_CTRL_L1_ENTRY_TIMER_SHIFT;
+-                      pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
+-              } else
+-                      pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+-
+-              if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
+-                      pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
+-              else
+-                      pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+-
+-      } else {
+-              pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+-              pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;
+-
+-              pm_ctrl_data |= PM_CTRL_CLK_SWH_L1;
+-
+-              if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT)
+-                      pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
+-              else
+-                      pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+-      }
+-
+-      AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data);
+-}
+-
+-static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      struct net_device *netdev = adapter->netdev;
+-      u32 mac_ctrl_data;
+-
+-      mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
+-      mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
+-
+-      if (adapter->link_duplex == FULL_DUPLEX) {
+-              hw->mac_duplex = true;
+-              mac_ctrl_data |= MAC_CTRL_DUPLX;
+-      }
+-
+-      if (adapter->link_speed == SPEED_1000)
+-              hw->mac_speed = atl1c_mac_speed_1000;
+-      else
+-              hw->mac_speed = atl1c_mac_speed_10_100;
+-
+-      mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) <<
+-                      MAC_CTRL_SPEED_SHIFT;
+-
+-      mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+-      mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) <<
+-                      MAC_CTRL_PRMLEN_SHIFT);
+-
+-      if (adapter->vlgrp)
+-              mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+-
+-      mac_ctrl_data |= MAC_CTRL_BC_EN;
+-      if (netdev->flags & IFF_PROMISC)
+-              mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+-      if (netdev->flags & IFF_ALLMULTI)
+-              mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+-
+-      mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN;
+-      AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+-}
+-
+-/*
+- * atl1c_configure - Configure Transmit&Receive Unit after Reset
+- * @adapter: board private structure
+- *
+- * Configure the Tx /Rx unit of the MAC after a reset.
+- */
+-static int atl1c_configure(struct atl1c_adapter *adapter)
+-{
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 master_ctrl_data = 0;
+-      u32 intr_modrt_data;
+-
+-      /* clear interrupt status */
+-      AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF);
+-      /*  Clear any WOL status */
+-      AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+-      /* set Interrupt Clear Timer
+-       * HW will enable self to assert interrupt event to system after
+-       * waiting x-time for software to notify it accept interrupt.
+-       */
+-      AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER,
+-              hw->ict & INT_RETRIG_TIMER_MASK);
+-
+-      atl1c_configure_des_ring(adapter);
+-
+-      if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) {
+-              intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) <<
+-                                      IRQ_MODRT_TX_TIMER_SHIFT;
+-              intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) <<
+-                                      IRQ_MODRT_RX_TIMER_SHIFT;
+-              AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
+-              master_ctrl_data |=
+-                      MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN;
+-      }
+-
+-      if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ)
+-              master_ctrl_data |= MASTER_CTRL_INT_RDCLR;
+-
+-      AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+-
+-      if (hw->ctrl_flags & ATL1C_CMB_ENABLE) {
+-              AT_WRITE_REG(hw, REG_CMB_TPD_THRESH,
+-                      hw->cmb_tpd & CMB_TPD_THRESH_MASK);
+-              AT_WRITE_REG(hw, REG_CMB_TX_TIMER,
+-                      hw->cmb_tx_timer & CMB_TX_TIMER_MASK);
+-      }
+-
+-      if (hw->ctrl_flags & ATL1C_SMB_ENABLE)
+-              AT_WRITE_REG(hw, REG_SMB_STAT_TIMER,
+-                      hw->smb_timer & SMB_STAT_TIMER_MASK);
+-      /* set MTU */
+-      AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN +
+-                      VLAN_HLEN + ETH_FCS_LEN);
+-      /* HDS, disable */
+-      AT_WRITE_REG(hw, REG_HDS_CTRL, 0);
+-
+-      atl1c_configure_tx(adapter);
+-      atl1c_configure_rx(adapter);
+-      atl1c_configure_rss(adapter);
+-      atl1c_configure_dma(adapter);
+-
+-      return 0;
+-}
+-
+-static void atl1c_update_hw_stats(struct atl1c_adapter *adapter)
+-{
+-      u16 hw_reg_addr = 0;
+-      unsigned long *stats_item = NULL;
+-      u32 data;
+-
+-      /* update rx status */
+-      hw_reg_addr = REG_MAC_RX_STATUS_BIN;
+-      stats_item  = &adapter->hw_stats.rx_ok;
+-      while (hw_reg_addr <= REG_MAC_RX_STATUS_END) {
+-              AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
+-              *stats_item += data;
+-              stats_item++;
+-              hw_reg_addr += 4;
+-      }
+-/* update tx status */
+-      hw_reg_addr = REG_MAC_TX_STATUS_BIN;
+-      stats_item  = &adapter->hw_stats.tx_ok;
+-      while (hw_reg_addr <= REG_MAC_TX_STATUS_END) {
+-              AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
+-              *stats_item += data;
+-              stats_item++;
+-              hw_reg_addr += 4;
+-      }
+-}
+-
+-/*
+- * atl1c_get_stats - Get System Network Statistics
+- * @netdev: network interface device structure
+- *
+- * Returns the address of the device statistics structure.
+- * The statistics are actually updated from the timer callback.
+- */
+-static struct net_device_stats *atl1c_get_stats(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw_stats  *hw_stats = &adapter->hw_stats;
+-      struct net_device_stats *net_stats = &adapter->net_stats;
+-
+-      atl1c_update_hw_stats(adapter);
+-      net_stats->rx_packets = hw_stats->rx_ok;
+-      net_stats->tx_packets = hw_stats->tx_ok;
+-      net_stats->rx_bytes   = hw_stats->rx_byte_cnt;
+-      net_stats->tx_bytes   = hw_stats->tx_byte_cnt;
+-      net_stats->multicast  = hw_stats->rx_mcast;
+-      net_stats->collisions = hw_stats->tx_1_col +
+-                              hw_stats->tx_2_col * 2 +
+-                              hw_stats->tx_late_col + hw_stats->tx_abort_col;
+-      net_stats->rx_errors  = hw_stats->rx_frag + hw_stats->rx_fcs_err +
+-                              hw_stats->rx_len_err + hw_stats->rx_sz_ov +
+-                              hw_stats->rx_rrd_ov + hw_stats->rx_align_err;
+-      net_stats->rx_fifo_errors   = hw_stats->rx_rxf_ov;
+-      net_stats->rx_length_errors = hw_stats->rx_len_err;
+-      net_stats->rx_crc_errors    = hw_stats->rx_fcs_err;
+-      net_stats->rx_frame_errors  = hw_stats->rx_align_err;
+-      net_stats->rx_over_errors   = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+-
+-      net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+-
+-      net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col +
+-                              hw_stats->tx_underrun + hw_stats->tx_trunc;
+-      net_stats->tx_fifo_errors    = hw_stats->tx_underrun;
+-      net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
+-      net_stats->tx_window_errors  = hw_stats->tx_late_col;
+-
+-      return &adapter->net_stats;
+-}
+-
+-static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter)
+-{
+-      u16 phy_data;
+-
+-      spin_lock(&adapter->mdio_lock);
+-      atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data);
+-      spin_unlock(&adapter->mdio_lock);
+-}
+-
+-static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter,
+-                              enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
+-                              &adapter->tpd_ring[type];
+-      struct atl1c_buffer *buffer_info;
+-      u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
+-      u16 hw_next_to_clean;
+-      u16 shift;
+-      u32 data;
+-
+-      if (type == atl1c_trans_high)
+-              shift = MB_HTPD_CONS_IDX_SHIFT;
+-      else
+-              shift = MB_NTPD_CONS_IDX_SHIFT;
+-
+-      AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data);
+-      hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK;
+-
+-      while (next_to_clean != hw_next_to_clean) {
+-              buffer_info = &tpd_ring->buffer_info[next_to_clean];
+-              if (buffer_info->state == ATL1_BUFFER_BUSY) {
+-                      pci_unmap_page(adapter->pdev, buffer_info->dma,
+-                                      buffer_info->length, PCI_DMA_TODEVICE);
+-                      buffer_info->dma = 0;
+-                      if (buffer_info->skb) {
+-                              dev_kfree_skb_irq(buffer_info->skb);
+-                              buffer_info->skb = NULL;
+-                      }
+-                      buffer_info->state = ATL1_BUFFER_FREE;
+-              }
+-              if (++next_to_clean == tpd_ring->count)
+-                      next_to_clean = 0;
+-              atomic_set(&tpd_ring->next_to_clean, next_to_clean);
+-      }
+-
+-      if (netif_queue_stopped(adapter->netdev) &&
+-                      netif_carrier_ok(adapter->netdev)) {
+-              netif_wake_queue(adapter->netdev);
+-      }
+-
+-      return true;
+-}
+-
+-/*
+- * atl1c_intr - Interrupt Handler
+- * @irq: interrupt number
+- * @data: pointer to a network interface device structure
+- * @pt_regs: CPU registers structure
+- */
+-static irqreturn_t atl1c_intr(int irq, void *data)
+-{
+-      struct net_device *netdev  = data;
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct atl1c_hw *hw = &adapter->hw;
+-      int max_ints = AT_MAX_INT_WORK;
+-      int handled = IRQ_NONE;
+-      u32 status;
+-      u32 reg_data;
+-
+-      do {
+-              AT_READ_REG(hw, REG_ISR, &reg_data);
+-              status = reg_data & hw->intr_mask;
+-
+-              if (status == 0 || (status & ISR_DIS_INT) != 0) {
+-                      if (max_ints != AT_MAX_INT_WORK)
+-                              handled = IRQ_HANDLED;
+-                      break;
+-              }
+-              /* link event */
+-              if (status & ISR_GPHY)
+-                      atl1c_clear_phy_int(adapter);
+-              /* Ack ISR */
+-              AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
+-              if (status & ISR_RX_PKT) {
+-                      if (likely(napi_schedule_prep(&adapter->napi))) {
+-                              hw->intr_mask &= ~ISR_RX_PKT;
+-                              AT_WRITE_REG(hw, REG_IMR, hw->intr_mask);
+-                              __napi_schedule(&adapter->napi);
+-                      }
+-              }
+-              if (status & ISR_TX_PKT)
+-                      atl1c_clean_tx_irq(adapter, atl1c_trans_normal);
+-
+-              handled = IRQ_HANDLED;
+-              /* check if PCIE PHY Link down */
+-              if (status & ISR_ERROR) {
+-                      if (netif_msg_hw(adapter))
+-                              dev_err(&pdev->dev,
+-                                      "atl1c hardware error (status = 0x%x)\n",
+-                                      status & ISR_ERROR);
+-                      /* reset MAC */
+-                      hw->intr_mask &= ~ISR_ERROR;
+-                      AT_WRITE_REG(hw, REG_IMR, hw->intr_mask);
+-                      schedule_work(&adapter->reset_task);
+-                      break;
+-              }
+-
+-              if (status & ISR_OVER)
+-                      if (netif_msg_intr(adapter))
+-                              dev_warn(&pdev->dev,
+-                                      "TX/RX over flow (status = 0x%x)\n",
+-                                      status & ISR_OVER);
+-
+-              /* link event */
+-              if (status & (ISR_GPHY | ISR_MANUAL)) {
+-                      adapter->net_stats.tx_carrier_errors++;
+-                      atl1c_link_chg_event(adapter);
+-                      break;
+-              }
+-
+-      } while (--max_ints > 0);
+-      /* re-enable Interrupt*/
+-      AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+-      return handled;
+-}
+-
+-static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter,
+-                struct sk_buff *skb, struct atl1c_recv_ret_status *prrs)
+-{
+-      /*
+-       * The pid field in RRS in not correct sometimes, so we
+-       * cannot figure out if the packet is fragmented or not,
+-       * so we tell the KERNEL CHECKSUM_NONE
+-       */
+-      skb->ip_summed = CHECKSUM_NONE;
+-}
+-
+-static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, const int ringid)
+-{
+-      struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[ringid];
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct atl1c_buffer *buffer_info, *next_info;
+-      struct sk_buff *skb;
+-      void *vir_addr = NULL;
+-      u16 num_alloc = 0;
+-      u16 rfd_next_to_use, next_next;
+-      struct atl1c_rx_free_desc *rfd_desc;
+-
+-      next_next = rfd_next_to_use = rfd_ring->next_to_use;
+-      if (++next_next == rfd_ring->count)
+-              next_next = 0;
+-      buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
+-      next_info = &rfd_ring->buffer_info[next_next];
+-
+-      while (next_info->state == ATL1_BUFFER_FREE) {
+-              rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
+-
+-              skb = dev_alloc_skb(adapter->rx_buffer_len);
+-              if (unlikely(!skb)) {
+-                      if (netif_msg_rx_err(adapter))
+-                              dev_warn(&pdev->dev, "alloc rx buffer failed\n");
+-                      break;
+-              }
+-
+-              /*
+-               * Make buffer alignment 2 beyond a 16 byte boundary
+-               * this will result in a 16 byte aligned IP header after
+-               * the 14 byte MAC header is removed
+-               */
+-              vir_addr = skb->data;
+-              buffer_info->state = ATL1_BUFFER_BUSY;
+-              buffer_info->skb = skb;
+-              buffer_info->length = adapter->rx_buffer_len;
+-              buffer_info->dma = pci_map_single(pdev, vir_addr,
+-                                              buffer_info->length,
+-                                              PCI_DMA_FROMDEVICE);
+-              rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+-              rfd_next_to_use = next_next;
+-              if (++next_next == rfd_ring->count)
+-                      next_next = 0;
+-              buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
+-              next_info = &rfd_ring->buffer_info[next_next];
+-              num_alloc++;
+-      }
+-
+-      if (num_alloc) {
+-              /* TODO: update mailbox here */
+-              wmb();
+-              rfd_ring->next_to_use = rfd_next_to_use;
+-              AT_WRITE_REG(&adapter->hw, atl1c_rfd_prod_idx_regs[ringid],
+-                      rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK);
+-      }
+-
+-      return num_alloc;
+-}
+-
+-static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring,
+-                      struct  atl1c_recv_ret_status *rrs, u16 num)
+-{
+-      u16 i;
+-      /* the relationship between rrd and rfd is one map one */
+-      for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring,
+-                                      rrd_ring->next_to_clean)) {
+-              rrs->word3 &= ~RRS_RXD_UPDATED;
+-              if (++rrd_ring->next_to_clean == rrd_ring->count)
+-                      rrd_ring->next_to_clean = 0;
+-      }
+-}
+-
+-static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring,
+-      struct atl1c_recv_ret_status *rrs, u16 num)
+-{
+-      u16 i;
+-      u16 rfd_index;
+-      struct atl1c_buffer *buffer_info = rfd_ring->buffer_info;
+-
+-      rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
+-                      RRS_RX_RFD_INDEX_MASK;
+-      for (i = 0; i < num; i++) {
+-              buffer_info[rfd_index].skb = NULL;
+-              buffer_info[rfd_index].state = ATL1_BUFFER_FREE;
+-              if (++rfd_index == rfd_ring->count)
+-                      rfd_index = 0;
+-      }
+-      rfd_ring->next_to_clean = rfd_index;
+-}
+-
+-static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
+-                 int *work_done, int work_to_do)
+-{
+-      u16 rfd_num, rfd_index;
+-      u16 count = 0;
+-      u16 length;
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct net_device *netdev  = adapter->netdev;
+-      struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[que];
+-      struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring[que];
+-      struct sk_buff *skb;
+-      struct atl1c_recv_ret_status *rrs;
+-      struct atl1c_buffer *buffer_info;
+-
+-      while (1) {
+-              if (*work_done >= work_to_do)
+-                      break;
+-              rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean);
+-              if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
+-                      rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
+-                              RRS_RX_RFD_CNT_MASK;
+-                      if (unlikely(rfd_num) != 1)
+-                              /* TODO support mul rfd*/
+-                              if (netif_msg_rx_err(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "Multi rfd not support yet!\n");
+-                      goto rrs_checked;
+-              } else {
+-                      break;
+-              }
+-rrs_checked:
+-              atl1c_clean_rrd(rrd_ring, rrs, rfd_num);
+-              if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) {
+-                      atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
+-                              if (netif_msg_rx_err(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "wrong packet! rrs word3 is %x\n",
+-                                              rrs->word3);
+-                      continue;
+-              }
+-
+-              length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) &
+-                              RRS_PKT_SIZE_MASK);
+-              /* Good Receive */
+-              if (likely(rfd_num == 1)) {
+-                      rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
+-                                      RRS_RX_RFD_INDEX_MASK;
+-                      buffer_info = &rfd_ring->buffer_info[rfd_index];
+-                      pci_unmap_single(pdev, buffer_info->dma,
+-                              buffer_info->length, PCI_DMA_FROMDEVICE);
+-                      skb = buffer_info->skb;
+-              } else {
+-                      /* TODO */
+-                      if (netif_msg_rx_err(adapter))
+-                              dev_warn(&pdev->dev,
+-                                      "Multi rfd not support yet!\n");
+-                      break;
+-              }
+-              atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
+-              skb_put(skb, length - ETH_FCS_LEN);
+-              skb->protocol = eth_type_trans(skb, netdev);
+-              skb->dev = netdev;
+-              atl1c_rx_checksum(adapter, skb, rrs);
+-              if (unlikely(adapter->vlgrp) && rrs->word3 & RRS_VLAN_INS) {
+-                      u16 vlan;
+-
+-                      AT_TAG_TO_VLAN(rrs->vlan_tag, vlan);
+-                      vlan = le16_to_cpu(vlan);
+-                      vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vlan);
+-              } else
+-                      netif_receive_skb(skb);
+-
+-              netdev->last_rx = jiffies;
+-              (*work_done)++;
+-              count++;
+-      }
+-      if (count)
+-              atl1c_alloc_rx_buffer(adapter, que);
+-}
+-
+-/*
+- * atl1c_clean - NAPI Rx polling callback
+- * @adapter: board private structure
+- */
+-static int atl1c_clean(struct napi_struct *napi, int budget)
+-{
+-      struct atl1c_adapter *adapter =
+-                      container_of(napi, struct atl1c_adapter, napi);
+-      int work_done = 0;
+-
+-      /* Keep link state information with original netdev */
+-      if (!netif_carrier_ok(adapter->netdev))
+-              goto quit_polling;
+-      /* just enable one RXQ */
+-      atl1c_clean_rx_irq(adapter, 0, &work_done, budget);
+-
+-      if (work_done < budget) {
+-quit_polling:
+-              napi_complete(napi);
+-              adapter->hw.intr_mask |= ISR_RX_PKT;
+-              AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
+-      }
+-      return work_done;
+-}
+-
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+-
+-/*
+- * Polling 'interrupt' - used by things like netconsole to send skbs
+- * without having to re-enable interrupts. It's not called while
+- * the interrupt routine is executing.
+- */
+-static void atl1c_netpoll(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      disable_irq(adapter->pdev->irq);
+-      atl1c_intr(adapter->pdev->irq, netdev);
+-      enable_irq(adapter->pdev->irq);
+-}
+-#endif
+-
+-static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+-      u16 next_to_use = 0;
+-      u16 next_to_clean = 0;
+-
+-      next_to_clean = atomic_read(&tpd_ring->next_to_clean);
+-      next_to_use   = tpd_ring->next_to_use;
+-
+-      return (u16)(next_to_clean > next_to_use) ?
+-              (next_to_clean - next_to_use - 1) :
+-              (tpd_ring->count + next_to_clean - next_to_use - 1);
+-}
+-
+-/*
+- * get next usable tpd
+- * Note: should call atl1c_tdp_avail to make sure
+- * there is enough tpd to use
+- */
+-static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter,
+-      enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+-      struct atl1c_tpd_desc *tpd_desc;
+-      u16 next_to_use = 0;
+-
+-      next_to_use = tpd_ring->next_to_use;
+-      if (++tpd_ring->next_to_use == tpd_ring->count)
+-              tpd_ring->next_to_use = 0;
+-      tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use);
+-      memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc));
+-      return  tpd_desc;
+-}
+-
+-static struct atl1c_buffer *
+-atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+-
+-      return &tpd_ring->buffer_info[tpd -
+-                      (struct atl1c_tpd_desc *)tpd_ring->desc];
+-}
+-
+-/* Calculate the transmit packet descript needed*/
+-static u16 atl1c_cal_tpd_req(const struct sk_buff *skb)
+-{
+-      u16 tpd_req;
+-      u16 proto_hdr_len = 0;
+-
+-      tpd_req = skb_shinfo(skb)->nr_frags + 1;
+-
+-      if (skb_is_gso(skb)) {
+-              proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+-              if (proto_hdr_len < skb_headlen(skb))
+-                      tpd_req++;
+-              if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+-                      tpd_req++;
+-      }
+-      return tpd_req;
+-}
+-
+-static int atl1c_tso_csum(struct atl1c_adapter *adapter,
+-                        struct sk_buff *skb,
+-                        struct atl1c_tpd_desc **tpd,
+-                        enum atl1c_trans_queue type)
+-{
+-      struct pci_dev *pdev = adapter->pdev;
+-      u8 hdr_len;
+-      u32 real_len;
+-      unsigned short offload_type;
+-      int err;
+-
+-      if (skb_is_gso(skb)) {
+-              if (skb_header_cloned(skb)) {
+-                      err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+-                      if (unlikely(err))
+-                              return -1;
+-              }
+-              offload_type = skb_shinfo(skb)->gso_type;
+-
+-              if (offload_type & SKB_GSO_TCPV4) {
+-                      real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
+-                                      + ntohs(ip_hdr(skb)->tot_len));
+-
+-                      if (real_len < skb->len)
+-                              pskb_trim(skb, real_len);
+-
+-                      hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+-                      if (unlikely(skb->len == hdr_len)) {
+-                              /* only xsum need */
+-                              if (netif_msg_tx_queued(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "IPV4 tso with zero data??\n");
+-                              goto check_sum;
+-                      } else {
+-                              ip_hdr(skb)->check = 0;
+-                              tcp_hdr(skb)->check = ~csum_tcpudp_magic(
+-                                                      ip_hdr(skb)->saddr,
+-                                                      ip_hdr(skb)->daddr,
+-                                                      0, IPPROTO_TCP, 0);
+-                              (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT;
+-                      }
+-              }
+-
+-              if (offload_type & SKB_GSO_TCPV6) {
+-                      struct atl1c_tpd_ext_desc *etpd =
+-                              *(struct atl1c_tpd_ext_desc **)(tpd);
+-
+-                      memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc));
+-                      *tpd = atl1c_get_tpd(adapter, type);
+-                      ipv6_hdr(skb)->payload_len = 0;
+-                      /* check payload == 0 byte ? */
+-                      hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+-                      if (unlikely(skb->len == hdr_len)) {
+-                              /* only xsum need */
+-                              if (netif_msg_tx_queued(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "IPV6 tso with zero data??\n");
+-                              goto check_sum;
+-                      } else
+-                              tcp_hdr(skb)->check = ~csum_ipv6_magic(
+-                                              &ipv6_hdr(skb)->saddr,
+-                                              &ipv6_hdr(skb)->daddr,
+-                                              0, IPPROTO_TCP, 0);
+-                      etpd->word1 |= 1 << TPD_LSO_EN_SHIFT;
+-                      etpd->word1 |= 1 << TPD_LSO_VER_SHIFT;
+-                      etpd->pkt_len = cpu_to_le32(skb->len);
+-                      (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT;
+-              }
+-
+-              (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT;
+-              (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) <<
+-                              TPD_TCPHDR_OFFSET_SHIFT;
+-              (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) <<
+-                              TPD_MSS_SHIFT;
+-              return 0;
+-      }
+-
+-check_sum:
+-      if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+-              u8 css, cso;
+-              cso = skb_transport_offset(skb);
+-
+-              if (unlikely(cso & 0x1)) {
+-                      if (netif_msg_tx_err(adapter))
+-                              dev_err(&adapter->pdev->dev,
+-                                      "payload offset should not an event number\n");
+-                      return -1;
+-              } else {
+-                      css = cso + skb->csum_offset;
+-
+-                      (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) <<
+-                                      TPD_PLOADOFFSET_SHIFT;
+-                      (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) <<
+-                                      TPD_CCSUM_OFFSET_SHIFT;
+-                      (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT;
+-              }
+-      }
+-      return 0;
+-}
+-
+-static void atl1c_tx_map(struct atl1c_adapter *adapter,
+-                    struct sk_buff *skb, struct atl1c_tpd_desc *tpd,
+-                      enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_desc *use_tpd = NULL;
+-      struct atl1c_buffer *buffer_info = NULL;
+-      u16 buf_len = skb_headlen(skb);
+-      u16 map_len = 0;
+-      u16 mapped_len = 0;
+-      u16 hdr_len = 0;
+-      u16 nr_frags;
+-      u16 f;
+-      int tso;
+-
+-      nr_frags = skb_shinfo(skb)->nr_frags;
+-      tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK;
+-      if (tso) {
+-              /* TSO */
+-              map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+-              use_tpd = tpd;
+-
+-              buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+-              buffer_info->length = map_len;
+-              buffer_info->dma = pci_map_single(adapter->pdev,
+-                                      skb->data, hdr_len, PCI_DMA_TODEVICE);
+-              buffer_info->state = ATL1_BUFFER_BUSY;
+-              mapped_len += map_len;
+-              use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+-              use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
+-      }
+-
+-      if (mapped_len < buf_len) {
+-              /* mapped_len == 0, means we should use the first tpd,
+-                 which is given by caller  */
+-              if (mapped_len == 0)
+-                      use_tpd = tpd;
+-              else {
+-                      use_tpd = atl1c_get_tpd(adapter, type);
+-                      memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+-                      use_tpd = atl1c_get_tpd(adapter, type);
+-                      memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+-              }
+-              buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+-              buffer_info->length = buf_len - mapped_len;
+-              buffer_info->dma =
+-                      pci_map_single(adapter->pdev, skb->data + mapped_len,
+-                                      buffer_info->length, PCI_DMA_TODEVICE);
+-              buffer_info->state = ATL1_BUFFER_BUSY;
+-
+-              use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+-              use_tpd->buffer_len  = cpu_to_le16(buffer_info->length);
+-      }
+-
+-      for (f = 0; f < nr_frags; f++) {
+-              struct skb_frag_struct *frag;
+-
+-              frag = &skb_shinfo(skb)->frags[f];
+-
+-              use_tpd = atl1c_get_tpd(adapter, type);
+-              memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+-
+-              buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+-              buffer_info->length = frag->size;
+-              buffer_info->dma =
+-                      pci_map_page(adapter->pdev, frag->page,
+-                                      frag->page_offset,
+-                                      buffer_info->length,
+-                                      PCI_DMA_TODEVICE);
+-              buffer_info->state = ATL1_BUFFER_BUSY;
+-
+-              use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+-              use_tpd->buffer_len  = cpu_to_le16(buffer_info->length);
+-      }
+-
+-      /* The last tpd */
+-      use_tpd->word1 |= 1 << TPD_EOP_SHIFT;
+-      /* The last buffer info contain the skb address,
+-         so it will be free after unmap */
+-      buffer_info->skb = skb;
+-}
+-
+-static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb,
+-                         struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type)
+-{
+-      struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+-      u32 prod_data;
+-
+-      AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data);
+-      switch (type) {
+-      case atl1c_trans_high:
+-              prod_data &= 0xFFFF0000;
+-              prod_data |= tpd_ring->next_to_use & 0xFFFF;
+-              break;
+-      case atl1c_trans_normal:
+-              prod_data &= 0x0000FFFF;
+-              prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16;
+-              break;
+-      default:
+-              break;
+-      }
+-      wmb();
+-      AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data);
+-}
+-
+-static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      unsigned long flags;
+-      u16 tpd_req = 1;
+-      struct atl1c_tpd_desc *tpd;
+-      enum atl1c_trans_queue type = atl1c_trans_normal;
+-
+-      if (test_bit(__AT_DOWN, &adapter->flags)) {
+-              dev_kfree_skb_any(skb);
+-              return NETDEV_TX_OK;
+-      }
+-
+-      tpd_req = atl1c_cal_tpd_req(skb);
+-      if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) {
+-              if (netif_msg_pktdata(adapter))
+-                      dev_info(&adapter->pdev->dev, "tx locked\n");
+-              return NETDEV_TX_LOCKED;
+-      }
+-      if (skb->mark == 0x01)
+-              type = atl1c_trans_high;
+-      else
+-              type = atl1c_trans_normal;
+-
+-      if (atl1c_tpd_avail(adapter, type) < tpd_req) {
+-              /* no enough descriptor, just stop queue */
+-              netif_stop_queue(netdev);
+-              spin_unlock_irqrestore(&adapter->tx_lock, flags);
+-              return NETDEV_TX_BUSY;
+-      }
+-
+-      tpd = atl1c_get_tpd(adapter, type);
+-
+-      /* do TSO and check sum */
+-      if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) {
+-              spin_unlock_irqrestore(&adapter->tx_lock, flags);
+-              dev_kfree_skb_any(skb);
+-              return NETDEV_TX_OK;
+-      }
+-
+-      if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+-              u16 vlan = vlan_tx_tag_get(skb);
+-              __le16 tag;
+-
+-              vlan = cpu_to_le16(vlan);
+-              AT_VLAN_TO_TAG(vlan, tag);
+-              tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT;
+-              tpd->vlan_tag = tag;
+-      }
+-
+-      if (skb_network_offset(skb) != ETH_HLEN)
+-              tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */
+-
+-      atl1c_tx_map(adapter, skb, tpd, type);
+-      atl1c_tx_queue(adapter, skb, tpd, type);
+-
+-      netdev->trans_start = jiffies;
+-      spin_unlock_irqrestore(&adapter->tx_lock, flags);
+-      return NETDEV_TX_OK;
+-}
+-
+-static void atl1c_free_irq(struct atl1c_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-
+-      free_irq(adapter->pdev->irq, netdev);
+-
+-      if (adapter->have_msi)
+-              pci_disable_msi(adapter->pdev);
+-}
+-
+-static int atl1c_request_irq(struct atl1c_adapter *adapter)
+-{
+-      struct pci_dev    *pdev   = adapter->pdev;
+-      struct net_device *netdev = adapter->netdev;
+-      int flags = 0;
+-      int err = 0;
+-
+-      adapter->have_msi = true;
+-      err = pci_enable_msi(adapter->pdev);
+-      if (err) {
+-              if (netif_msg_ifup(adapter))
+-                      dev_err(&pdev->dev,
+-                              "Unable to allocate MSI interrupt Error: %d\n",
+-                              err);
+-              adapter->have_msi = false;
+-      } else
+-              netdev->irq = pdev->irq;
+-
+-      if (!adapter->have_msi)
+-              flags |= IRQF_SHARED;
+-      err = request_irq(adapter->pdev->irq, &atl1c_intr, flags,
+-                      netdev->name, netdev);
+-      if (err) {
+-              if (netif_msg_ifup(adapter))
+-                      dev_err(&pdev->dev,
+-                              "Unable to allocate interrupt Error: %d\n",
+-                              err);
+-              if (adapter->have_msi)
+-                      pci_disable_msi(adapter->pdev);
+-              return err;
+-      }
+-      if (netif_msg_ifup(adapter))
+-              dev_dbg(&pdev->dev, "atl1c_request_irq OK\n");
+-      return err;
+-}
+-
+-int atl1c_up(struct atl1c_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-      int num;
+-      int err;
+-      int i;
+-
+-      netif_carrier_off(netdev);
+-      atl1c_init_ring_ptrs(adapter);
+-      atl1c_set_multi(netdev);
+-      atl1c_restore_vlan(adapter);
+-
+-      for (i = 0; i < adapter->num_rx_queues; i++) {
+-              num = atl1c_alloc_rx_buffer(adapter, i);
+-              if (unlikely(num == 0)) {
+-                      err = -ENOMEM;
+-                      goto err_alloc_rx;
+-              }
+-      }
+-
+-      if (atl1c_configure(adapter)) {
+-              err = -EIO;
+-              goto err_up;
+-      }
+-
+-      err = atl1c_request_irq(adapter);
+-      if (unlikely(err))
+-              goto err_up;
+-
+-      clear_bit(__AT_DOWN, &adapter->flags);
+-      napi_enable(&adapter->napi);
+-      atl1c_irq_enable(adapter);
+-      atl1c_check_link_status(adapter);
+-      netif_start_queue(netdev);
+-      return err;
+-
+-err_up:
+-err_alloc_rx:
+-      atl1c_clean_rx_ring(adapter);
+-      return err;
+-}
+-
+-void atl1c_down(struct atl1c_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-
+-      atl1c_del_timer(adapter);
+-      atl1c_cancel_work(adapter);
+-
+-      /* signal that we're down so the interrupt handler does not
+-       * reschedule our watchdog timer */
+-      set_bit(__AT_DOWN, &adapter->flags);
+-      netif_carrier_off(netdev);
+-      napi_disable(&adapter->napi);
+-      atl1c_irq_disable(adapter);
+-      atl1c_free_irq(adapter);
+-      AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT);
+-      /* reset MAC to disable all RX/TX */
+-      atl1c_reset_mac(&adapter->hw);
+-      msleep(1);
+-
+-      adapter->link_speed = SPEED_0;
+-      adapter->link_duplex = -1;
+-      atl1c_clean_tx_ring(adapter, atl1c_trans_normal);
+-      atl1c_clean_tx_ring(adapter, atl1c_trans_high);
+-      atl1c_clean_rx_ring(adapter);
+-}
+-
+-/*
+- * atl1c_open - Called when a network interface is made active
+- * @netdev: network interface device structure
+- *
+- * Returns 0 on success, negative value on failure
+- *
+- * The open entry point is called when a network interface is made
+- * active by the system (IFF_UP).  At this point all resources needed
+- * for transmit and receive operations are allocated, the interrupt
+- * handler is registered with the OS, the watchdog timer is started,
+- * and the stack is notified that the interface is ready.
+- */
+-static int atl1c_open(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      int err;
+-
+-      /* disallow open during test */
+-      if (test_bit(__AT_TESTING, &adapter->flags))
+-              return -EBUSY;
+-
+-      /* allocate rx/tx dma buffer & descriptors */
+-      err = atl1c_setup_ring_resources(adapter);
+-      if (unlikely(err))
+-              return err;
+-
+-      err = atl1c_up(adapter);
+-      if (unlikely(err))
+-              goto err_up;
+-
+-      if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
+-              u32 phy_data;
+-
+-              AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data);
+-              phy_data |= MDIO_AP_EN;
+-              AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data);
+-      }
+-      return 0;
+-
+-err_up:
+-      atl1c_free_irq(adapter);
+-      atl1c_free_ring_resources(adapter);
+-      atl1c_reset_mac(&adapter->hw);
+-      return err;
+-}
+-
+-/*
+- * atl1c_close - Disables a network interface
+- * @netdev: network interface device structure
+- *
+- * Returns 0, this is not allowed to fail
+- *
+- * The close entry point is called when an interface is de-activated
+- * by the OS.  The hardware is still under the drivers control, but
+- * needs to be disabled.  A global MAC reset is issued to stop the
+- * hardware, and all transmit and receive resources are freed.
+- */
+-static int atl1c_close(struct net_device *netdev)
+-{
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+-      atl1c_down(adapter);
+-      atl1c_free_ring_resources(adapter);
+-      return 0;
+-}
+-
+-static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-      struct atl1c_hw *hw = &adapter->hw;
+-      u32 ctrl;
+-      u32 mac_ctrl_data;
+-      u32 master_ctrl_data;
+-      u32 wol_ctrl_data;
+-      u16 mii_bmsr_data;
+-      u16 save_autoneg_advertised;
+-      u16 mii_intr_status_data;
+-      u32 wufc = adapter->wol;
+-      u32 i;
+-      int retval = 0;
+-
+-      if (netif_running(netdev)) {
+-              WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+-              atl1c_down(adapter);
+-      }
+-      netif_device_detach(netdev);
+-      atl1c_disable_l0s_l1(hw);
+-      retval = pci_save_state(pdev);
+-      if (retval)
+-              return retval;
+-      if (wufc) {
+-              AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
+-              master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS;
+-
+-              /* get link status */
+-              atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+-              atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+-              save_autoneg_advertised = hw->autoneg_advertised;
+-              hw->autoneg_advertised = ADVERTISED_10baseT_Half;
+-              if (atl1c_restart_autoneg(hw) != 0)
+-                      if (netif_msg_link(adapter))
+-                              dev_warn(&pdev->dev, "phy autoneg failed\n");
+-              hw->phy_configured = false; /* re-init PHY when resume */
+-              hw->autoneg_advertised = save_autoneg_advertised;
+-              /* turn on magic packet wol */
+-              if (wufc & AT_WUFC_MAG)
+-                      wol_ctrl_data = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
+-
+-              if (wufc & AT_WUFC_LNKC) {
+-                      for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
+-                              msleep(100);
+-                              atl1c_read_phy_reg(hw, MII_BMSR,
+-                                      (u16 *)&mii_bmsr_data);
+-                              if (mii_bmsr_data & BMSR_LSTATUS)
+-                                      break;
+-                      }
+-                      if ((mii_bmsr_data & BMSR_LSTATUS) == 0)
+-                              if (netif_msg_link(adapter))
+-                                      dev_warn(&pdev->dev,
+-                                              "%s: Link may change"
+-                                              "when suspend\n",
+-                                              atl1c_driver_name);
+-                      wol_ctrl_data |=  WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
+-                      /* only link up can wake up */
+-                      if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) {
+-                              if (netif_msg_link(adapter))
+-                                      dev_err(&pdev->dev,
+-                                              "%s: read write phy "
+-                                              "register failed.\n",
+-                                              atl1c_driver_name);
+-                              goto wol_dis;
+-                      }
+-              }
+-              /* clear phy interrupt */
+-              atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data);
+-              /* Config MAC Ctrl register */
+-              mac_ctrl_data = MAC_CTRL_RX_EN;
+-              /* set to 10/100M halt duplex */
+-              mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT;
+-              mac_ctrl_data |= (((u32)adapter->hw.preamble_len &
+-                               MAC_CTRL_PRMLEN_MASK) <<
+-                               MAC_CTRL_PRMLEN_SHIFT);
+-
+-              if (adapter->vlgrp)
+-                      mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+-
+-              /* magic packet maybe Broadcast&multicast&Unicast frame */
+-              if (wufc & AT_WUFC_MAG)
+-                      mac_ctrl_data |= MAC_CTRL_BC_EN;
+-
+-              if (netif_msg_hw(adapter))
+-                      dev_dbg(&pdev->dev,
+-                              "%s: suspend MAC=0x%x\n",
+-                              atl1c_driver_name, mac_ctrl_data);
+-              AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+-              AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+-              AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+-
+-              /* pcie patch */
+-              AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl);
+-              ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+-              AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+-
+-              pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+-              goto suspend_exit;
+-      }
+-wol_dis:
+-
+-      /* WOL disabled */
+-      AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+-
+-      /* pcie patch */
+-      AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl);
+-      ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+-      AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+-
+-      atl1c_phy_disable(hw);
+-      hw->phy_configured = false; /* re-init PHY when resume */
+-
+-      pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+-suspend_exit:
+-
+-      pci_disable_device(pdev);
+-      pci_set_power_state(pdev, pci_choose_state(pdev, state));
+-
+-      return 0;
+-}
+-
+-static int atl1c_resume(struct pci_dev *pdev)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      pci_set_power_state(pdev, PCI_D0);
+-      pci_restore_state(pdev);
+-      pci_enable_wake(pdev, PCI_D3hot, 0);
+-      pci_enable_wake(pdev, PCI_D3cold, 0);
+-
+-      AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
+-
+-      atl1c_phy_reset(&adapter->hw);
+-      atl1c_reset_mac(&adapter->hw);
+-      netif_device_attach(netdev);
+-      if (netif_running(netdev))
+-              atl1c_up(adapter);
+-
+-      return 0;
+-}
+-
+-static void atl1c_shutdown(struct pci_dev *pdev)
+-{
+-      atl1c_suspend(pdev, PMSG_SUSPEND);
+-}
+-
+-static const struct net_device_ops atl1c_netdev_ops = {
+-      .ndo_open               = atl1c_open,
+-      .ndo_stop               = atl1c_close,
+-      .ndo_validate_addr      = eth_validate_addr,
+-      .ndo_start_xmit         = atl1c_xmit_frame,
+-      .ndo_set_mac_address    = atl1c_set_mac_addr,
+-      .ndo_set_multicast_list = atl1c_set_multi,
+-      .ndo_change_mtu         = atl1c_change_mtu,
+-      .ndo_do_ioctl           = atl1c_ioctl,
+-      .ndo_tx_timeout         = atl1c_tx_timeout,
+-      .ndo_get_stats          = atl1c_get_stats,
+-      .ndo_vlan_rx_register   = atl1c_vlan_rx_register,
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+-      .ndo_poll_controller    = atl1c_netpoll,
+-#endif
+-};
+-
+-static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
+-{
+-      SET_NETDEV_DEV(netdev, &pdev->dev);
+-      pci_set_drvdata(pdev, netdev);
+-
+-      netdev->irq  = pdev->irq;
+-      netdev->netdev_ops = &atl1c_netdev_ops;
+-      netdev->watchdog_timeo = AT_TX_WATCHDOG;
+-      atl1c_set_ethtool_ops(netdev);
+-
+-      /* TODO: add when ready */
+-      netdev->features =      NETIF_F_SG         |
+-                              NETIF_F_HW_CSUM    |
+-                              NETIF_F_HW_VLAN_TX |
+-                              NETIF_F_HW_VLAN_RX |
+-                              NETIF_F_TSO        |
+-                              NETIF_F_TSO6;
+-      return 0;
+-}
+-
+-/*
+- * atl1c_probe - Device Initialization Routine
+- * @pdev: PCI device information struct
+- * @ent: entry in atl1c_pci_tbl
+- *
+- * Returns 0 on success, negative on failure
+- *
+- * atl1c_probe initializes an adapter identified by a pci_dev structure.
+- * The OS initialization, configuring of the adapter private structure,
+- * and a hardware reset occur.
+- */
+-static int __devinit atl1c_probe(struct pci_dev *pdev,
+-                               const struct pci_device_id *ent)
+-{
+-      struct net_device *netdev;
+-      struct atl1c_adapter *adapter;
+-      static int cards_found;
+-
+-      int err = 0;
+-
+-      /* enable device (incl. PCI PM wakeup and hotplug setup) */
+-      err = pci_enable_device_mem(pdev);
+-      if (err) {
+-              dev_err(&pdev->dev, "cannot enable PCI device\n");
+-              return err;
+-      }
+-
+-      /*
+-       * The atl1c chip can DMA to 64-bit addresses, but it uses a single
+-       * shared register for the high 32 bits, so only a single, aligned,
+-       * 4 GB physical address range can be used at a time.
+-       *
+-       * Supporting 64-bit DMA on this hardware is more trouble than it's
+-       * worth.  It is far easier to limit to 32-bit DMA than update
+-       * various kernel subsystems to support the mechanics required by a
+-       * fixed-high-32-bit system.
+-       */
+-      if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
+-          (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+-              dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
+-              goto err_dma;
+-      }
+-
+-      err = pci_request_regions(pdev, atl1c_driver_name);
+-      if (err) {
+-              dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+-              goto err_pci_reg;
+-      }
+-
+-      pci_set_master(pdev);
+-
+-      netdev = alloc_etherdev(sizeof(struct atl1c_adapter));
+-      if (netdev == NULL) {
+-              err = -ENOMEM;
+-              dev_err(&pdev->dev, "etherdev alloc failed\n");
+-              goto err_alloc_etherdev;
+-      }
+-
+-      err = atl1c_init_netdev(netdev, pdev);
+-      if (err) {
+-              dev_err(&pdev->dev, "init netdevice failed\n");
+-              goto err_init_netdev;
+-      }
+-      adapter = netdev_priv(netdev);
+-      adapter->bd_number = cards_found;
+-      adapter->netdev = netdev;
+-      adapter->pdev = pdev;
+-      adapter->hw.adapter = adapter;
+-      adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg);
+-      adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+-      if (!adapter->hw.hw_addr) {
+-              err = -EIO;
+-              dev_err(&pdev->dev, "cannot map device registers\n");
+-              goto err_ioremap;
+-      }
+-      netdev->base_addr = (unsigned long)adapter->hw.hw_addr;
+-
+-      /* init mii data */
+-      adapter->mii.dev = netdev;
+-      adapter->mii.mdio_read  = atl1c_mdio_read;
+-      adapter->mii.mdio_write = atl1c_mdio_write;
+-      adapter->mii.phy_id_mask = 0x1f;
+-      adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK;
+-      netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64);
+-      setup_timer(&adapter->phy_config_timer, atl1c_phy_config,
+-                      (unsigned long)adapter);
+-      /* setup the private structure */
+-      err = atl1c_sw_init(adapter);
+-      if (err) {
+-              dev_err(&pdev->dev, "net device private data init failed\n");
+-              goto err_sw_init;
+-      }
+-      atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
+-                      ATL1C_PCIE_PHY_RESET);
+-
+-      /* Init GPHY as early as possible due to power saving issue  */
+-      atl1c_phy_reset(&adapter->hw);
+-
+-      err = atl1c_reset_mac(&adapter->hw);
+-      if (err) {
+-              err = -EIO;
+-              goto err_reset;
+-      }
+-
+-      device_init_wakeup(&pdev->dev, 1);
+-      /* reset the controller to
+-       * put the device in a known good starting state */
+-      err = atl1c_phy_init(&adapter->hw);
+-      if (err) {
+-              err = -EIO;
+-              goto err_reset;
+-      }
+-      if (atl1c_read_mac_addr(&adapter->hw) != 0) {
+-              err = -EIO;
+-              dev_err(&pdev->dev, "get mac address failed\n");
+-              goto err_eeprom;
+-      }
+-      memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+-      memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+-      if (netif_msg_probe(adapter))
+-              dev_dbg(&pdev->dev,
+-                      "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n",
+-                      adapter->hw.mac_addr[0], adapter->hw.mac_addr[1],
+-                      adapter->hw.mac_addr[2], adapter->hw.mac_addr[3],
+-                      adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]);
+-
+-      atl1c_hw_set_mac_addr(&adapter->hw);
+-      INIT_WORK(&adapter->reset_task, atl1c_reset_task);
+-      INIT_WORK(&adapter->link_chg_task, atl1c_link_chg_task);
+-      err = register_netdev(netdev);
+-      if (err) {
+-              dev_err(&pdev->dev, "register netdevice failed\n");
+-              goto err_register;
+-      }
+-
+-      if (netif_msg_probe(adapter))
+-              dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION);
+-      cards_found++;
+-      return 0;
+-
+-err_reset:
+-err_register:
+-err_sw_init:
+-err_eeprom:
+-      iounmap(adapter->hw.hw_addr);
+-err_init_netdev:
+-err_ioremap:
+-      free_netdev(netdev);
+-err_alloc_etherdev:
+-      pci_release_regions(pdev);
+-err_pci_reg:
+-err_dma:
+-      pci_disable_device(pdev);
+-      return err;
+-}
+-
+-/*
+- * atl1c_remove - Device Removal Routine
+- * @pdev: PCI device information struct
+- *
+- * atl1c_remove is called by the PCI subsystem to alert the driver
+- * that it should release a PCI device.  The could be caused by a
+- * Hot-Plug event, or because the driver is going to be removed from
+- * memory.
+- */
+-static void __devexit atl1c_remove(struct pci_dev *pdev)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      unregister_netdev(netdev);
+-      atl1c_phy_disable(&adapter->hw);
+-
+-      iounmap(adapter->hw.hw_addr);
+-
+-      pci_release_regions(pdev);
+-      pci_disable_device(pdev);
+-      free_netdev(netdev);
+-}
+-
+-/*
+- * atl1c_io_error_detected - called when PCI error is detected
+- * @pdev: Pointer to PCI device
+- * @state: The current pci connection state
+- *
+- * This function is called after a PCI bus error affecting
+- * this device has been detected.
+- */
+-static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev,
+-                                              pci_channel_state_t state)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      netif_device_detach(netdev);
+-
+-      if (netif_running(netdev))
+-              atl1c_down(adapter);
+-
+-      pci_disable_device(pdev);
+-
+-      /* Request a slot slot reset. */
+-      return PCI_ERS_RESULT_NEED_RESET;
+-}
+-
+-/*
+- * atl1c_io_slot_reset - called after the pci bus has been reset.
+- * @pdev: Pointer to PCI device
+- *
+- * Restart the card from scratch, as if from a cold-boot. Implementation
+- * resembles the first-half of the e1000_resume routine.
+- */
+-static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      if (pci_enable_device(pdev)) {
+-              if (netif_msg_hw(adapter))
+-                      dev_err(&pdev->dev,
+-                              "Cannot re-enable PCI device after reset\n");
+-              return PCI_ERS_RESULT_DISCONNECT;
+-      }
+-      pci_set_master(pdev);
+-
+-      pci_enable_wake(pdev, PCI_D3hot, 0);
+-      pci_enable_wake(pdev, PCI_D3cold, 0);
+-
+-      atl1c_reset_mac(&adapter->hw);
+-
+-      return PCI_ERS_RESULT_RECOVERED;
+-}
+-
+-/*
+- * atl1c_io_resume - called when traffic can start flowing again.
+- * @pdev: Pointer to PCI device
+- *
+- * This callback is called when the error recovery driver tells us that
+- * its OK to resume normal operation. Implementation resembles the
+- * second-half of the atl1c_resume routine.
+- */
+-static void atl1c_io_resume(struct pci_dev *pdev)
+-{
+-      struct net_device *netdev = pci_get_drvdata(pdev);
+-      struct atl1c_adapter *adapter = netdev_priv(netdev);
+-
+-      if (netif_running(netdev)) {
+-              if (atl1c_up(adapter)) {
+-                      if (netif_msg_hw(adapter))
+-                              dev_err(&pdev->dev,
+-                                      "Cannot bring device back up after reset\n");
+-                      return;
+-              }
+-      }
+-
+-      netif_device_attach(netdev);
+-}
+-
+-static struct pci_error_handlers atl1c_err_handler = {
+-      .error_detected = atl1c_io_error_detected,
+-      .slot_reset = atl1c_io_slot_reset,
+-      .resume = atl1c_io_resume,
+-};
+-
+-static struct pci_driver atl1c_driver = {
+-      .name     = atl1c_driver_name,
+-      .id_table = atl1c_pci_tbl,
+-      .probe    = atl1c_probe,
+-      .remove   = __devexit_p(atl1c_remove),
+-      /* Power Managment Hooks */
+-      .suspend  = atl1c_suspend,
+-      .resume   = atl1c_resume,
+-      .shutdown = atl1c_shutdown,
+-      .err_handler = &atl1c_err_handler
+-};
+-
+-/*
+- * atl1c_init_module - Driver Registration Routine
+- *
+- * atl1c_init_module is the first routine called when the driver is
+- * loaded. All it does is register with the PCI subsystem.
+- */
+-static int __init atl1c_init_module(void)
+-{
+-      return pci_register_driver(&atl1c_driver);
+-}
+-
+-/*
+- * atl1c_exit_module - Driver Exit Cleanup Routine
+- *
+- * atl1c_exit_module is called just before the driver is removed
+- * from memory.
+- */
+-static void __exit atl1c_exit_module(void)
+-{
+-      pci_unregister_driver(&atl1c_driver);
+-}
+-
+-module_init(atl1c_init_module);
+-module_exit(atl1c_exit_module);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/atl1c/Makefile linux-2.6.29-rc3.owrt/drivers/net/atl1c/Makefile
+--- linux-2.6.29.owrt/drivers/net/atl1c/Makefile       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/atl1c/Makefile   1970-01-01 01:00:00.000000000 +0100
+@@ -1,2 +0,0 @@
+-obj-$(CONFIG_ATL1C) += atl1c.o
+-atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/b44.c linux-2.6.29-rc3.owrt/drivers/net/b44.c
+--- linux-2.6.29.owrt/drivers/net/b44.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/b44.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1264,14 +1264,8 @@
+ static void b44_chip_reset(struct b44 *bp, int reset_kind)
+ {
+       struct ssb_device *sdev = bp->sdev;
+-      bool was_enabled;
+-      was_enabled = ssb_device_is_enabled(bp->sdev);
+-
+-      ssb_device_enable(bp->sdev, 0);
+-      ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+-
+-      if (was_enabled) {
++      if (ssb_device_is_enabled(bp->sdev)) {
+               bw32(bp, B44_RCV_LAZY, 0);
+               bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
+               b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
+@@ -1283,8 +1277,10 @@
+               }
+               bw32(bp, B44_DMARX_CTRL, 0);
+               bp->rx_prod = bp->rx_cons = 0;
+-      }
++      } else
++              ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
++      ssb_device_enable(bp->sdev, 0);
+       b44_clear_stats(bp);
+       /*
+@@ -2240,7 +2236,6 @@
+       struct net_device *dev = ssb_get_drvdata(sdev);
+       unregister_netdev(dev);
+-      ssb_device_disable(sdev, 0);
+       ssb_bus_may_powerdown(sdev->bus);
+       free_netdev(dev);
+       ssb_pcihost_set_power_state(sdev, PCI_D3hot);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be_cmds.c linux-2.6.29-rc3.owrt/drivers/net/benet/be_cmds.c
+--- linux-2.6.29.owrt/drivers/net/benet/be_cmds.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be_cmds.c  1970-01-01 01:00:00.000000000 +0100
+@@ -1,861 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-#include "be.h"
+-
+-static int be_mbox_db_ready_wait(void __iomem *db)
+-{
+-      int cnt = 0, wait = 5;
+-      u32 ready;
+-
+-      do {
+-              ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+-              if (ready)
+-                      break;
+-
+-              if (cnt > 200000) {
+-                      printk(KERN_WARNING DRV_NAME
+-                              ": mbox_db poll timed out\n");
+-                      return -1;
+-              }
+-
+-              if (cnt > 50)
+-                      wait = 200;
+-              cnt += wait;
+-              udelay(wait);
+-      } while (true);
+-
+-      return 0;
+-}
+-
+-/*
+- * Insert the mailbox address into the doorbell in two steps
+- */
+-static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
+-{
+-      int status;
+-      u16 compl_status, extd_status;
+-      u32 val = 0;
+-      void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+-      struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+-      struct be_mcc_mailbox *mbox = mbox_mem->va;
+-      struct be_mcc_cq_entry *cqe = &mbox->cqe;
+-
+-      memset(cqe, 0, sizeof(*cqe));
+-
+-      val &= ~MPU_MAILBOX_DB_RDY_MASK;
+-      val |= MPU_MAILBOX_DB_HI_MASK;
+-      /* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
+-      val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+-      iowrite32(val, db);
+-
+-      /* wait for ready to be set */
+-      status = be_mbox_db_ready_wait(db);
+-      if (status != 0)
+-              return status;
+-
+-      val = 0;
+-      val &= ~MPU_MAILBOX_DB_RDY_MASK;
+-      val &= ~MPU_MAILBOX_DB_HI_MASK;
+-      /* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
+-      val |= (u32)(mbox_mem->dma >> 4) << 2;
+-      iowrite32(val, db);
+-
+-      status = be_mbox_db_ready_wait(db);
+-      if (status != 0)
+-              return status;
+-
+-      /* compl entry has been made now */
+-      be_dws_le_to_cpu(cqe, sizeof(*cqe));
+-      if (!(cqe->flags & CQE_FLAGS_VALID_MASK)) {
+-              printk(KERN_WARNING DRV_NAME ": ERROR invalid mbox compl\n");
+-              return -1;
+-      }
+-
+-      compl_status = (cqe->status >> CQE_STATUS_COMPL_SHIFT) &
+-                              CQE_STATUS_COMPL_MASK;
+-      if (compl_status != MCC_STATUS_SUCCESS) {
+-              extd_status = (cqe->status >> CQE_STATUS_EXTD_SHIFT) &
+-                              CQE_STATUS_EXTD_MASK;
+-              printk(KERN_WARNING DRV_NAME
+-                      ": ERROR in cmd compl. status(compl/extd)=%d/%d\n",
+-                      compl_status, extd_status);
+-      }
+-
+-      return compl_status;
+-}
+-
+-static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
+-{
+-      u32 sem = ioread32(ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+-
+-      *stage = sem & EP_SEMAPHORE_POST_STAGE_MASK;
+-      if ((sem >> EP_SEMAPHORE_POST_ERR_SHIFT) & EP_SEMAPHORE_POST_ERR_MASK)
+-              return -1;
+-      else
+-              return 0;
+-}
+-
+-static int be_POST_stage_poll(struct be_ctrl_info *ctrl, u16 poll_stage)
+-{
+-      u16 stage, cnt, error;
+-      for (cnt = 0; cnt < 5000; cnt++) {
+-              error = be_POST_stage_get(ctrl, &stage);
+-              if (error)
+-                      return -1;
+-
+-              if (stage == poll_stage)
+-                      break;
+-              udelay(1000);
+-      }
+-      if (stage != poll_stage)
+-              return -1;
+-      return 0;
+-}
+-
+-
+-int be_cmd_POST(struct be_ctrl_info *ctrl)
+-{
+-      u16 stage, error;
+-
+-      error = be_POST_stage_get(ctrl, &stage);
+-      if (error)
+-              goto err;
+-
+-      if (stage == POST_STAGE_ARMFW_RDY)
+-              return 0;
+-
+-      if (stage != POST_STAGE_AWAITING_HOST_RDY)
+-              goto err;
+-
+-      /* On awaiting host rdy, reset and again poll on awaiting host rdy */
+-      iowrite32(POST_STAGE_BE_RESET, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+-      error = be_POST_stage_poll(ctrl, POST_STAGE_AWAITING_HOST_RDY);
+-      if (error)
+-              goto err;
+-
+-      /* Now kickoff POST and poll on armfw ready */
+-      iowrite32(POST_STAGE_HOST_RDY, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+-      error = be_POST_stage_poll(ctrl, POST_STAGE_ARMFW_RDY);
+-      if (error)
+-              goto err;
+-
+-      return 0;
+-err:
+-      printk(KERN_WARNING DRV_NAME ": ERROR, stage=%d\n", stage);
+-      return -1;
+-}
+-
+-static inline void *embedded_payload(struct be_mcc_wrb *wrb)
+-{
+-      return wrb->payload.embedded_payload;
+-}
+-
+-static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
+-{
+-      return &wrb->payload.sgl[0];
+-}
+-
+-/* Don't touch the hdr after it's prepared */
+-static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+-                              bool embedded, u8 sge_cnt)
+-{
+-      if (embedded)
+-              wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+-      else
+-              wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
+-                              MCC_WRB_SGE_CNT_SHIFT;
+-      wrb->payload_length = payload_len;
+-      be_dws_cpu_to_le(wrb, 20);
+-}
+-
+-/* Don't touch the hdr after it's prepared */
+-static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+-                              u8 subsystem, u8 opcode, int cmd_len)
+-{
+-      req_hdr->opcode = opcode;
+-      req_hdr->subsystem = subsystem;
+-      req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+-}
+-
+-static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
+-                      struct be_dma_mem *mem)
+-{
+-      int i, buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
+-      u64 dma = (u64)mem->dma;
+-
+-      for (i = 0; i < buf_pages; i++) {
+-              pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
+-              pages[i].hi = cpu_to_le32(upper_32_bits(dma));
+-              dma += PAGE_SIZE_4K;
+-      }
+-}
+-
+-/* Converts interrupt delay in microseconds to multiplier value */
+-static u32 eq_delay_to_mult(u32 usec_delay)
+-{
+-#define MAX_INTR_RATE                 651042
+-      const u32 round = 10;
+-      u32 multiplier;
+-
+-      if (usec_delay == 0)
+-              multiplier = 0;
+-      else {
+-              u32 interrupt_rate = 1000000 / usec_delay;
+-              /* Max delay, corresponding to the lowest interrupt rate */
+-              if (interrupt_rate == 0)
+-                      multiplier = 1023;
+-              else {
+-                      multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
+-                      multiplier /= interrupt_rate;
+-                      /* Round the multiplier to the closest value.*/
+-                      multiplier = (multiplier + round/2) / round;
+-                      multiplier = min(multiplier, (u32)1023);
+-              }
+-      }
+-      return multiplier;
+-}
+-
+-static inline struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+-{
+-      return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+-}
+-
+-int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+-              struct be_queue_info *eq, int eq_delay)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_eq_create *req = embedded_payload(wrb);
+-      struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+-      struct be_dma_mem *q_mem = &eq->dma_mem;
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+-
+-      req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+-
+-      AMAP_SET_BITS(struct amap_eq_context, func, req->context,
+-                      ctrl->pci_func);
+-      AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
+-      /* 4byte eqe*/
+-      AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
+-      AMAP_SET_BITS(struct amap_eq_context, count, req->context,
+-                      __ilog2_u32(eq->len/256));
+-      AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
+-                      eq_delay_to_mult(eq_delay));
+-      be_dws_cpu_to_le(req->context, sizeof(req->context));
+-
+-      be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              eq->id = le16_to_cpu(resp->eq_id);
+-              eq->created = true;
+-      }
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+-                      u8 type, bool permanent, u32 if_handle)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_mac_query *req = embedded_payload(wrb);
+-      struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req));
+-
+-      req->type = type;
+-      if (permanent) {
+-              req->permanent = 1;
+-      } else {
+-              req->if_id = cpu_to_le16((u16)if_handle);
+-              req->permanent = 0;
+-      }
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status)
+-              memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+-              u32 if_id, u32 *pmac_id)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req));
+-
+-      req->if_id = cpu_to_le32(if_id);
+-      memcpy(req->mac_address, mac_addr, ETH_ALEN);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_pmac_add *resp = embedded_payload(wrb);
+-              *pmac_id = le32_to_cpu(resp->pmac_id);
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req));
+-
+-      req->if_id = cpu_to_le32(if_id);
+-      req->pmac_id = cpu_to_le32(pmac_id);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+-              struct be_queue_info *cq, struct be_queue_info *eq,
+-              bool sol_evts, bool no_delay, int coalesce_wm)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_cq_create *req = embedded_payload(wrb);
+-      struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+-      struct be_dma_mem *q_mem = &cq->dma_mem;
+-      void *ctxt = &req->context;
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+-
+-      req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+-
+-      AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
+-      AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+-      AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+-                      __ilog2_u32(cq->len/256));
+-      AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+-      AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+-      AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+-      AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+-      AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 0);
+-      AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
+-      be_dws_cpu_to_le(ctxt, sizeof(req->context));
+-
+-      be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              cq->id = le16_to_cpu(resp->cq_id);
+-              cq->created = true;
+-      }
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+-                      struct be_queue_info *txq,
+-                      struct be_queue_info *cq)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_eth_tx_create *req = embedded_payload(wrb);
+-      struct be_dma_mem *q_mem = &txq->dma_mem;
+-      void *ctxt = &req->context;
+-      int status;
+-      u32 len_encoded;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_TX_CREATE,
+-              sizeof(*req));
+-
+-      req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+-      req->ulp_num = BE_ULP1_NUM;
+-      req->type = BE_ETH_TX_RING_TYPE_STANDARD;
+-
+-      len_encoded = fls(txq->len); /* log2(len) + 1 */
+-      if (len_encoded == 16)
+-              len_encoded = 0;
+-      AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt, len_encoded);
+-      AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
+-                      ctrl->pci_func);
+-      AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
+-      AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
+-
+-      be_dws_cpu_to_le(ctxt, sizeof(req->context));
+-
+-      be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_eth_tx_create *resp = embedded_payload(wrb);
+-              txq->id = le16_to_cpu(resp->cid);
+-              txq->created = true;
+-      }
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+-              struct be_queue_info *rxq, u16 cq_id, u16 frag_size,
+-              u16 max_frame_size, u32 if_id, u32 rss)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_eth_rx_create *req = embedded_payload(wrb);
+-      struct be_dma_mem *q_mem = &rxq->dma_mem;
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_CREATE,
+-              sizeof(*req));
+-
+-      req->cq_id = cpu_to_le16(cq_id);
+-      req->frag_size = fls(frag_size) - 1;
+-      req->num_pages = 2;
+-      be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+-      req->interface_id = cpu_to_le32(if_id);
+-      req->max_frame_size = cpu_to_le16(max_frame_size);
+-      req->rss_queue = cpu_to_le32(rss);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_eth_rx_create *resp = embedded_payload(wrb);
+-              rxq->id = le16_to_cpu(resp->id);
+-              rxq->created = true;
+-      }
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-/* Generic destroyer function for all types of queues */
+-int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+-              int queue_type)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+-      u8 subsys = 0, opcode = 0;
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-
+-      memset(wrb, 0, sizeof(*wrb));
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      switch (queue_type) {
+-      case QTYPE_EQ:
+-              subsys = CMD_SUBSYSTEM_COMMON;
+-              opcode = OPCODE_COMMON_EQ_DESTROY;
+-              break;
+-      case QTYPE_CQ:
+-              subsys = CMD_SUBSYSTEM_COMMON;
+-              opcode = OPCODE_COMMON_CQ_DESTROY;
+-              break;
+-      case QTYPE_TXQ:
+-              subsys = CMD_SUBSYSTEM_ETH;
+-              opcode = OPCODE_ETH_TX_DESTROY;
+-              break;
+-      case QTYPE_RXQ:
+-              subsys = CMD_SUBSYSTEM_ETH;
+-              opcode = OPCODE_ETH_RX_DESTROY;
+-              break;
+-      default:
+-              printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
+-              status = -1;
+-              goto err;
+-      }
+-      be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+-      req->id = cpu_to_le16(q->id);
+-
+-      status = be_mbox_db_ring(ctrl);
+-err:
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-/* Create an rx filtering policy configuration on an i/f */
+-int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
+-              bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_if_create *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
+-
+-      req->capability_flags = cpu_to_le32(flags);
+-      req->enable_flags = cpu_to_le32(flags);
+-      if (!pmac_invalid)
+-              memcpy(req->mac_addr, mac, ETH_ALEN);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_if_create *resp = embedded_payload(wrb);
+-              *if_handle = le32_to_cpu(resp->interface_id);
+-              if (!pmac_invalid)
+-                      *pmac_id = le32_to_cpu(resp->pmac_id);
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
+-
+-      req->interface_id = cpu_to_le32(interface_id);
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-
+-      return status;
+-}
+-
+-/* Get stats is a non embedded command: the request is not embedded inside
+- * WRB but is a separate dma memory block
+- */
+-int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_get_stats *req = nonemb_cmd->va;
+-      struct be_sge *sge = nonembedded_sgl(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      memset(req, 0, sizeof(*req));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+-              OPCODE_ETH_GET_STATISTICS, sizeof(*req));
+-      sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+-      sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+-      sge->len = cpu_to_le32(nonemb_cmd->size);
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_get_stats *resp = nonemb_cmd->va;
+-              be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+-                      struct be_link_info *link)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_link_status *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
+-              link->speed = resp->mac_speed;
+-              link->duplex = resp->mac_duplex;
+-              link->fault = resp->mac_fault;
+-      } else {
+-              link->speed = PHY_LINK_SPEED_ZERO;
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
+-              strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-/* set the EQ delay interval of an EQ to specified value */
+-int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
+-
+-      req->num_eq = cpu_to_le32(1);
+-      req->delay[0].eq_id = cpu_to_le32(eq_id);
+-      req->delay[0].phase = 0;
+-      req->delay[0].delay_multiplier = cpu_to_le32(eqd);
+-
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
+-                      u32 num, bool untagged, bool promiscuous)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req));
+-
+-      req->interface_id = if_id;
+-      req->promiscuous = promiscuous;
+-      req->untagged = untagged;
+-      req->num_vlan = num;
+-      if (!promiscuous) {
+-              memcpy(req->normal_vlan, vtag_array,
+-                      req->num_vlan * sizeof(vtag_array[0]));
+-      }
+-
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+-              OPCODE_ETH_PROMISCUOUS, sizeof(*req));
+-
+-      if (port_num)
+-              req->port1_promiscuous = en;
+-      else
+-              req->port0_promiscuous = en;
+-
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
+-                      u32 num, bool promiscuous)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
+-
+-      req->interface_id = if_id;
+-      req->promiscuous = promiscuous;
+-      if (!promiscuous) {
+-              req->num_mac = cpu_to_le16(num);
+-              if (num)
+-                      memcpy(req->mac, mac_table, ETH_ALEN * num);
+-      }
+-
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req));
+-
+-      req->tx_flow_control = cpu_to_le16((u16)tx_fc);
+-      req->rx_flow_control = cpu_to_le16((u16)rx_fc);
+-
+-      status = be_mbox_db_ring(ctrl);
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_get_flow_control *resp =
+-                                              embedded_payload(wrb);
+-              *tx_fc = le16_to_cpu(resp->tx_flow_control);
+-              *rx_fc = le16_to_cpu(resp->rx_flow_control);
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+-
+-int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
+-{
+-      struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+-      struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
+-      int status;
+-
+-      spin_lock(&ctrl->cmd_lock);
+-
+-      memset(wrb, 0, sizeof(*wrb));
+-
+-      be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+-
+-      be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+-              OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+-
+-      status = be_mbox_db_ring(ctrl);
+-      if (!status) {
+-              struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
+-              *port_num = le32_to_cpu(resp->phys_port);
+-      }
+-
+-      spin_unlock(&ctrl->cmd_lock);
+-      return status;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be_cmds.h linux-2.6.29-rc3.owrt/drivers/net/benet/be_cmds.h
+--- linux-2.6.29.owrt/drivers/net/benet/be_cmds.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be_cmds.h  1970-01-01 01:00:00.000000000 +0100
+@@ -1,688 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-/*
+- * The driver sends configuration and managements command requests to the
+- * firmware in the BE. These requests are communicated to the processor
+- * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
+- * WRB inside a MAILBOX.
+- * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+- */
+-
+-struct be_sge {
+-      u32 pa_lo;
+-      u32 pa_hi;
+-      u32 len;
+-};
+-
+-#define MCC_WRB_EMBEDDED_MASK 1       /* bit 0 of dword 0*/
+-#define MCC_WRB_SGE_CNT_SHIFT 3       /* bits 3 - 7 of dword 0 */
+-#define MCC_WRB_SGE_CNT_MASK  0x1F    /* bits 3 - 7 of dword 0 */
+-struct be_mcc_wrb {
+-      u32 embedded;           /* dword 0 */
+-      u32 payload_length;     /* dword 1 */
+-      u32 tag0;               /* dword 2 */
+-      u32 tag1;               /* dword 3 */
+-      u32 rsvd;               /* dword 4 */
+-      union {
+-              u8 embedded_payload[236]; /* used by embedded cmds */
+-              struct be_sge sgl[19];    /* used by non-embedded cmds */
+-      } payload;
+-};
+-
+-#define CQE_FLAGS_VALID_MASK          (1 << 31)
+-#define CQE_FLAGS_ASYNC_MASK          (1 << 30)
+-#define CQE_FLAGS_COMPLETED_MASK      (1 << 28)
+-#define CQE_FLAGS_CONSUMED_MASK       (1 << 27)
+-
+-/* Completion Status */
+-enum {
+-      MCC_STATUS_SUCCESS = 0x0,
+-/* The client does not have sufficient privileges to execute the command */
+-      MCC_STATUS_INSUFFICIENT_PRIVILEGES = 0x1,
+-/* A parameter in the command was invalid. */
+-      MCC_STATUS_INVALID_PARAMETER = 0x2,
+-/* There are insufficient chip resources to execute the command */
+-      MCC_STATUS_INSUFFICIENT_RESOURCES = 0x3,
+-/* The command is completing because the queue was getting flushed */
+-      MCC_STATUS_QUEUE_FLUSHING = 0x4,
+-/* The command is completing with a DMA error */
+-      MCC_STATUS_DMA_FAILED = 0x5
+-};
+-
+-#define CQE_STATUS_COMPL_MASK         0xFFFF
+-#define CQE_STATUS_COMPL_SHIFT                0       /* bits 0 - 15 */
+-#define CQE_STATUS_EXTD_MASK          0xFFFF
+-#define CQE_STATUS_EXTD_SHIFT         0       /* bits 0 - 15 */
+-
+-struct be_mcc_cq_entry {
+-      u32 status;             /* dword 0 */
+-      u32 tag0;               /* dword 1 */
+-      u32 tag1;               /* dword 2 */
+-      u32 flags;              /* dword 3 */
+-};
+-
+-struct be_mcc_mailbox {
+-      struct be_mcc_wrb wrb;
+-      struct be_mcc_cq_entry cqe;
+-};
+-
+-#define CMD_SUBSYSTEM_COMMON  0x1
+-#define CMD_SUBSYSTEM_ETH     0x3
+-
+-#define OPCODE_COMMON_NTWK_MAC_QUERY                  1
+-#define OPCODE_COMMON_NTWK_MAC_SET                    2
+-#define OPCODE_COMMON_NTWK_MULTICAST_SET              3
+-#define OPCODE_COMMON_NTWK_VLAN_CONFIG                4
+-#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY          5
+-#define OPCODE_COMMON_CQ_CREATE                               12
+-#define OPCODE_COMMON_EQ_CREATE                               13
+-#define OPCODE_COMMON_MCC_CREATE                      21
+-#define OPCODE_COMMON_NTWK_RX_FILTER                  34
+-#define OPCODE_COMMON_GET_FW_VERSION                  35
+-#define OPCODE_COMMON_SET_FLOW_CONTROL                        36
+-#define OPCODE_COMMON_GET_FLOW_CONTROL                        37
+-#define OPCODE_COMMON_SET_FRAME_SIZE                  39
+-#define OPCODE_COMMON_MODIFY_EQ_DELAY                 41
+-#define OPCODE_COMMON_FIRMWARE_CONFIG                 42
+-#define OPCODE_COMMON_NTWK_INTERFACE_CREATE           50
+-#define OPCODE_COMMON_NTWK_INTERFACE_DESTROY          51
+-#define OPCODE_COMMON_CQ_DESTROY                      54
+-#define OPCODE_COMMON_EQ_DESTROY                      55
+-#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG           58
+-#define OPCODE_COMMON_NTWK_PMAC_ADD                   59
+-#define OPCODE_COMMON_NTWK_PMAC_DEL                   60
+-
+-#define OPCODE_ETH_ACPI_CONFIG                                2
+-#define OPCODE_ETH_PROMISCUOUS                                3
+-#define OPCODE_ETH_GET_STATISTICS                     4
+-#define OPCODE_ETH_TX_CREATE                          7
+-#define OPCODE_ETH_RX_CREATE                          8
+-#define OPCODE_ETH_TX_DESTROY                         9
+-#define OPCODE_ETH_RX_DESTROY                         10
+-
+-struct be_cmd_req_hdr {
+-      u8 opcode;              /* dword 0 */
+-      u8 subsystem;           /* dword 0 */
+-      u8 port_number;         /* dword 0 */
+-      u8 domain;              /* dword 0 */
+-      u32 timeout;            /* dword 1 */
+-      u32 request_length;     /* dword 2 */
+-      u32 rsvd;               /* dword 3 */
+-};
+-
+-#define RESP_HDR_INFO_OPCODE_SHIFT    0       /* bits 0 - 7 */
+-#define RESP_HDR_INFO_SUBSYS_SHIFT    8       /* bits 8 - 15 */
+-struct be_cmd_resp_hdr {
+-      u32 info;               /* dword 0 */
+-      u32 status;             /* dword 1 */
+-      u32 response_length;    /* dword 2 */
+-      u32 actual_resp_len;    /* dword 3 */
+-};
+-
+-struct phys_addr {
+-      u32 lo;
+-      u32 hi;
+-};
+-
+-/**************************
+- * BE Command definitions *
+- **************************/
+-
+-/* Pseudo amap definition in which each bit of the actual structure is defined
+- * as a byte: used to calculate offset/shift/mask of each field */
+-struct amap_eq_context {
+-      u8 cidx[13];            /* dword 0*/
+-      u8 rsvd0[3];            /* dword 0*/
+-      u8 epidx[13];           /* dword 0*/
+-      u8 valid;               /* dword 0*/
+-      u8 rsvd1;               /* dword 0*/
+-      u8 size;                /* dword 0*/
+-      u8 pidx[13];            /* dword 1*/
+-      u8 rsvd2[3];            /* dword 1*/
+-      u8 pd[10];              /* dword 1*/
+-      u8 count[3];            /* dword 1*/
+-      u8 solevent;            /* dword 1*/
+-      u8 stalled;             /* dword 1*/
+-      u8 armed;               /* dword 1*/
+-      u8 rsvd3[4];            /* dword 2*/
+-      u8 func[8];             /* dword 2*/
+-      u8 rsvd4;               /* dword 2*/
+-      u8 delaymult[10];       /* dword 2*/
+-      u8 rsvd5[2];            /* dword 2*/
+-      u8 phase[2];            /* dword 2*/
+-      u8 nodelay;             /* dword 2*/
+-      u8 rsvd6[4];            /* dword 2*/
+-      u8 rsvd7[32];           /* dword 3*/
+-} __packed;
+-
+-struct be_cmd_req_eq_create {
+-      struct be_cmd_req_hdr hdr;
+-      u16 num_pages;          /* sword */
+-      u16 rsvd0;              /* sword */
+-      u8 context[sizeof(struct amap_eq_context) / 8];
+-      struct phys_addr pages[8];
+-} __packed;
+-
+-struct be_cmd_resp_eq_create {
+-      struct be_cmd_resp_hdr resp_hdr;
+-      u16 eq_id;              /* sword */
+-      u16 rsvd0;              /* sword */
+-} __packed;
+-
+-/******************** Mac query ***************************/
+-enum {
+-      MAC_ADDRESS_TYPE_STORAGE = 0x0,
+-      MAC_ADDRESS_TYPE_NETWORK = 0x1,
+-      MAC_ADDRESS_TYPE_PD = 0x2,
+-      MAC_ADDRESS_TYPE_MANAGEMENT = 0x3
+-};
+-
+-struct mac_addr {
+-      u16 size_of_struct;
+-      u8 addr[ETH_ALEN];
+-} __packed;
+-
+-struct be_cmd_req_mac_query {
+-      struct be_cmd_req_hdr hdr;
+-      u8 type;
+-      u8 permanent;
+-      u16 if_id;
+-} __packed;
+-
+-struct be_cmd_resp_mac_query {
+-      struct be_cmd_resp_hdr hdr;
+-      struct mac_addr mac;
+-};
+-
+-/******************** PMac Add ***************************/
+-struct be_cmd_req_pmac_add {
+-      struct be_cmd_req_hdr hdr;
+-      u32 if_id;
+-      u8 mac_address[ETH_ALEN];
+-      u8 rsvd0[2];
+-} __packed;
+-
+-struct be_cmd_resp_pmac_add {
+-      struct be_cmd_resp_hdr hdr;
+-      u32 pmac_id;
+-};
+-
+-/******************** PMac Del ***************************/
+-struct be_cmd_req_pmac_del {
+-      struct be_cmd_req_hdr hdr;
+-      u32 if_id;
+-      u32 pmac_id;
+-};
+-
+-/******************** Create CQ ***************************/
+-/* Pseudo amap definition in which each bit of the actual structure is defined
+- * as a byte: used to calculate offset/shift/mask of each field */
+-struct amap_cq_context {
+-      u8 cidx[11];            /* dword 0*/
+-      u8 rsvd0;               /* dword 0*/
+-      u8 coalescwm[2];        /* dword 0*/
+-      u8 nodelay;             /* dword 0*/
+-      u8 epidx[11];           /* dword 0*/
+-      u8 rsvd1;               /* dword 0*/
+-      u8 count[2];            /* dword 0*/
+-      u8 valid;               /* dword 0*/
+-      u8 solevent;            /* dword 0*/
+-      u8 eventable;           /* dword 0*/
+-      u8 pidx[11];            /* dword 1*/
+-      u8 rsvd2;               /* dword 1*/
+-      u8 pd[10];              /* dword 1*/
+-      u8 eqid[8];             /* dword 1*/
+-      u8 stalled;             /* dword 1*/
+-      u8 armed;               /* dword 1*/
+-      u8 rsvd3[4];            /* dword 2*/
+-      u8 func[8];             /* dword 2*/
+-      u8 rsvd4[20];           /* dword 2*/
+-      u8 rsvd5[32];           /* dword 3*/
+-} __packed;
+-
+-struct be_cmd_req_cq_create {
+-      struct be_cmd_req_hdr hdr;
+-      u16 num_pages;
+-      u16 rsvd0;
+-      u8 context[sizeof(struct amap_cq_context) / 8];
+-      struct phys_addr pages[8];
+-} __packed;
+-
+-struct be_cmd_resp_cq_create {
+-      struct be_cmd_resp_hdr hdr;
+-      u16 cq_id;
+-      u16 rsvd0;
+-} __packed;
+-
+-/******************** Create TxQ ***************************/
+-#define BE_ETH_TX_RING_TYPE_STANDARD          2
+-#define BE_ULP1_NUM                           1
+-
+-/* Pseudo amap definition in which each bit of the actual structure is defined
+- * as a byte: used to calculate offset/shift/mask of each field */
+-struct amap_tx_context {
+-      u8 rsvd0[16];           /* dword 0 */
+-      u8 tx_ring_size[4];     /* dword 0 */
+-      u8 rsvd1[26];           /* dword 0 */
+-      u8 pci_func_id[8];      /* dword 1 */
+-      u8 rsvd2[9];            /* dword 1 */
+-      u8 ctx_valid;           /* dword 1 */
+-      u8 cq_id_send[16];      /* dword 2 */
+-      u8 rsvd3[16];           /* dword 2 */
+-      u8 rsvd4[32];           /* dword 3 */
+-      u8 rsvd5[32];           /* dword 4 */
+-      u8 rsvd6[32];           /* dword 5 */
+-      u8 rsvd7[32];           /* dword 6 */
+-      u8 rsvd8[32];           /* dword 7 */
+-      u8 rsvd9[32];           /* dword 8 */
+-      u8 rsvd10[32];          /* dword 9 */
+-      u8 rsvd11[32];          /* dword 10 */
+-      u8 rsvd12[32];          /* dword 11 */
+-      u8 rsvd13[32];          /* dword 12 */
+-      u8 rsvd14[32];          /* dword 13 */
+-      u8 rsvd15[32];          /* dword 14 */
+-      u8 rsvd16[32];          /* dword 15 */
+-} __packed;
+-
+-struct be_cmd_req_eth_tx_create {
+-      struct be_cmd_req_hdr hdr;
+-      u8 num_pages;
+-      u8 ulp_num;
+-      u8 type;
+-      u8 bound_port;
+-      u8 context[sizeof(struct amap_tx_context) / 8];
+-      struct phys_addr pages[8];
+-} __packed;
+-
+-struct be_cmd_resp_eth_tx_create {
+-      struct be_cmd_resp_hdr hdr;
+-      u16 cid;
+-      u16 rsvd0;
+-} __packed;
+-
+-/******************** Create RxQ ***************************/
+-struct be_cmd_req_eth_rx_create {
+-      struct be_cmd_req_hdr hdr;
+-      u16 cq_id;
+-      u8 frag_size;
+-      u8 num_pages;
+-      struct phys_addr pages[2];
+-      u32 interface_id;
+-      u16 max_frame_size;
+-      u16 rsvd0;
+-      u32 rss_queue;
+-} __packed;
+-
+-struct be_cmd_resp_eth_rx_create {
+-      struct be_cmd_resp_hdr hdr;
+-      u16 id;
+-      u8 cpu_id;
+-      u8 rsvd0;
+-} __packed;
+-
+-/******************** Q Destroy  ***************************/
+-/* Type of Queue to be destroyed */
+-enum {
+-      QTYPE_EQ = 1,
+-      QTYPE_CQ,
+-      QTYPE_TXQ,
+-      QTYPE_RXQ
+-};
+-
+-struct be_cmd_req_q_destroy {
+-      struct be_cmd_req_hdr hdr;
+-      u16 id;
+-      u16 bypass_flush;       /* valid only for rx q destroy */
+-} __packed;
+-
+-/************ I/f Create (it's actually I/f Config Create)**********/
+-
+-/* Capability flags for the i/f */
+-enum be_if_flags {
+-      BE_IF_FLAGS_RSS = 0x4,
+-      BE_IF_FLAGS_PROMISCUOUS = 0x8,
+-      BE_IF_FLAGS_BROADCAST = 0x10,
+-      BE_IF_FLAGS_UNTAGGED = 0x20,
+-      BE_IF_FLAGS_ULP = 0x40,
+-      BE_IF_FLAGS_VLAN_PROMISCUOUS = 0x80,
+-      BE_IF_FLAGS_VLAN = 0x100,
+-      BE_IF_FLAGS_MCAST_PROMISCUOUS = 0x200,
+-      BE_IF_FLAGS_PASS_L2_ERRORS = 0x400,
+-      BE_IF_FLAGS_PASS_L3L4_ERRORS = 0x800
+-};
+-
+-/* An RX interface is an object with one or more MAC addresses and
+- * filtering capabilities. */
+-struct be_cmd_req_if_create {
+-      struct be_cmd_req_hdr hdr;
+-      u32 version;            /* ignore currntly */
+-      u32 capability_flags;
+-      u32 enable_flags;
+-      u8 mac_addr[ETH_ALEN];
+-      u8 rsvd0;
+-      u8 pmac_invalid; /* if set, don't attach the mac addr to the i/f */
+-      u32 vlan_tag;    /* not used currently */
+-} __packed;
+-
+-struct be_cmd_resp_if_create {
+-      struct be_cmd_resp_hdr hdr;
+-      u32 interface_id;
+-      u32 pmac_id;
+-};
+-
+-/****** I/f Destroy(it's actually I/f Config Destroy )**********/
+-struct be_cmd_req_if_destroy {
+-      struct be_cmd_req_hdr hdr;
+-      u32 interface_id;
+-};
+-
+-/*************** HW Stats Get **********************************/
+-struct be_port_rxf_stats {
+-      u32 rx_bytes_lsd;       /* dword 0*/
+-      u32 rx_bytes_msd;       /* dword 1*/
+-      u32 rx_total_frames;    /* dword 2*/
+-      u32 rx_unicast_frames;  /* dword 3*/
+-      u32 rx_multicast_frames;        /* dword 4*/
+-      u32 rx_broadcast_frames;        /* dword 5*/
+-      u32 rx_crc_errors;      /* dword 6*/
+-      u32 rx_alignment_symbol_errors; /* dword 7*/
+-      u32 rx_pause_frames;    /* dword 8*/
+-      u32 rx_control_frames;  /* dword 9*/
+-      u32 rx_in_range_errors; /* dword 10*/
+-      u32 rx_out_range_errors;        /* dword 11*/
+-      u32 rx_frame_too_long;  /* dword 12*/
+-      u32 rx_address_match_errors;    /* dword 13*/
+-      u32 rx_vlan_mismatch;   /* dword 14*/
+-      u32 rx_dropped_too_small;       /* dword 15*/
+-      u32 rx_dropped_too_short;       /* dword 16*/
+-      u32 rx_dropped_header_too_small;        /* dword 17*/
+-      u32 rx_dropped_tcp_length;      /* dword 18*/
+-      u32 rx_dropped_runt;    /* dword 19*/
+-      u32 rx_64_byte_packets; /* dword 20*/
+-      u32 rx_65_127_byte_packets;     /* dword 21*/
+-      u32 rx_128_256_byte_packets;    /* dword 22*/
+-      u32 rx_256_511_byte_packets;    /* dword 23*/
+-      u32 rx_512_1023_byte_packets;   /* dword 24*/
+-      u32 rx_1024_1518_byte_packets;  /* dword 25*/
+-      u32 rx_1519_2047_byte_packets;  /* dword 26*/
+-      u32 rx_2048_4095_byte_packets;  /* dword 27*/
+-      u32 rx_4096_8191_byte_packets;  /* dword 28*/
+-      u32 rx_8192_9216_byte_packets;  /* dword 29*/
+-      u32 rx_ip_checksum_errs;        /* dword 30*/
+-      u32 rx_tcp_checksum_errs;       /* dword 31*/
+-      u32 rx_udp_checksum_errs;       /* dword 32*/
+-      u32 rx_non_rss_packets; /* dword 33*/
+-      u32 rx_ipv4_packets;    /* dword 34*/
+-      u32 rx_ipv6_packets;    /* dword 35*/
+-      u32 rx_ipv4_bytes_lsd;  /* dword 36*/
+-      u32 rx_ipv4_bytes_msd;  /* dword 37*/
+-      u32 rx_ipv6_bytes_lsd;  /* dword 38*/
+-      u32 rx_ipv6_bytes_msd;  /* dword 39*/
+-      u32 rx_chute1_packets;  /* dword 40*/
+-      u32 rx_chute2_packets;  /* dword 41*/
+-      u32 rx_chute3_packets;  /* dword 42*/
+-      u32 rx_management_packets;      /* dword 43*/
+-      u32 rx_switched_unicast_packets;        /* dword 44*/
+-      u32 rx_switched_multicast_packets;      /* dword 45*/
+-      u32 rx_switched_broadcast_packets;      /* dword 46*/
+-      u32 tx_bytes_lsd;       /* dword 47*/
+-      u32 tx_bytes_msd;       /* dword 48*/
+-      u32 tx_unicastframes;   /* dword 49*/
+-      u32 tx_multicastframes; /* dword 50*/
+-      u32 tx_broadcastframes; /* dword 51*/
+-      u32 tx_pauseframes;     /* dword 52*/
+-      u32 tx_controlframes;   /* dword 53*/
+-      u32 tx_64_byte_packets; /* dword 54*/
+-      u32 tx_65_127_byte_packets;     /* dword 55*/
+-      u32 tx_128_256_byte_packets;    /* dword 56*/
+-      u32 tx_256_511_byte_packets;    /* dword 57*/
+-      u32 tx_512_1023_byte_packets;   /* dword 58*/
+-      u32 tx_1024_1518_byte_packets;  /* dword 59*/
+-      u32 tx_1519_2047_byte_packets;  /* dword 60*/
+-      u32 tx_2048_4095_byte_packets;  /* dword 61*/
+-      u32 tx_4096_8191_byte_packets;  /* dword 62*/
+-      u32 tx_8192_9216_byte_packets;  /* dword 63*/
+-      u32 rx_fifo_overflow;   /* dword 64*/
+-      u32 rx_input_fifo_overflow;     /* dword 65*/
+-};
+-
+-struct be_rxf_stats {
+-      struct be_port_rxf_stats port[2];
+-      u32 rx_drops_no_pbuf;   /* dword 132*/
+-      u32 rx_drops_no_txpb;   /* dword 133*/
+-      u32 rx_drops_no_erx_descr;      /* dword 134*/
+-      u32 rx_drops_no_tpre_descr;     /* dword 135*/
+-      u32 management_rx_port_packets; /* dword 136*/
+-      u32 management_rx_port_bytes;   /* dword 137*/
+-      u32 management_rx_port_pause_frames;    /* dword 138*/
+-      u32 management_rx_port_errors;  /* dword 139*/
+-      u32 management_tx_port_packets; /* dword 140*/
+-      u32 management_tx_port_bytes;   /* dword 141*/
+-      u32 management_tx_port_pause;   /* dword 142*/
+-      u32 management_rx_port_rxfifo_overflow; /* dword 143*/
+-      u32 rx_drops_too_many_frags;    /* dword 144*/
+-      u32 rx_drops_invalid_ring;      /* dword 145*/
+-      u32 forwarded_packets;  /* dword 146*/
+-      u32 rx_drops_mtu;       /* dword 147*/
+-      u32 rsvd0[15];
+-};
+-
+-struct be_erx_stats {
+-      u32 rx_drops_no_fragments[44];     /* dwordS 0 to 43*/
+-      u32 debug_wdma_sent_hold;          /* dword 44*/
+-      u32 debug_wdma_pbfree_sent_hold;   /* dword 45*/
+-      u32 debug_wdma_zerobyte_pbfree_sent_hold; /* dword 46*/
+-      u32 debug_pmem_pbuf_dealloc;       /* dword 47*/
+-};
+-
+-struct be_hw_stats {
+-      struct be_rxf_stats rxf;
+-      u32 rsvd[48];
+-      struct be_erx_stats erx;
+-};
+-
+-struct be_cmd_req_get_stats {
+-      struct be_cmd_req_hdr hdr;
+-      u8 rsvd[sizeof(struct be_hw_stats)];
+-};
+-
+-struct be_cmd_resp_get_stats {
+-      struct be_cmd_resp_hdr hdr;
+-      struct be_hw_stats hw_stats;
+-};
+-
+-struct be_cmd_req_vlan_config {
+-      struct be_cmd_req_hdr hdr;
+-      u8 interface_id;
+-      u8 promiscuous;
+-      u8 untagged;
+-      u8 num_vlan;
+-      u16 normal_vlan[64];
+-} __packed;
+-
+-struct be_cmd_req_promiscuous_config {
+-      struct be_cmd_req_hdr hdr;
+-      u8 port0_promiscuous;
+-      u8 port1_promiscuous;
+-      u16 rsvd0;
+-} __packed;
+-
+-struct macaddr {
+-      u8 byte[ETH_ALEN];
+-};
+-
+-struct be_cmd_req_mcast_mac_config {
+-      struct be_cmd_req_hdr hdr;
+-      u16 num_mac;
+-      u8 promiscuous;
+-      u8 interface_id;
+-      struct macaddr mac[32];
+-} __packed;
+-
+-static inline struct be_hw_stats *
+-hw_stats_from_cmd(struct be_cmd_resp_get_stats *cmd)
+-{
+-      return &cmd->hw_stats;
+-}
+-
+-/******************** Link Status Query *******************/
+-struct be_cmd_req_link_status {
+-      struct be_cmd_req_hdr hdr;
+-      u32 rsvd;
+-};
+-
+-struct be_link_info {
+-      u8 duplex;
+-      u8 speed;
+-      u8 fault;
+-};
+-
+-enum {
+-      PHY_LINK_DUPLEX_NONE = 0x0,
+-      PHY_LINK_DUPLEX_HALF = 0x1,
+-      PHY_LINK_DUPLEX_FULL = 0x2
+-};
+-
+-enum {
+-      PHY_LINK_SPEED_ZERO = 0x0,      /* => No link */
+-      PHY_LINK_SPEED_10MBPS = 0x1,
+-      PHY_LINK_SPEED_100MBPS = 0x2,
+-      PHY_LINK_SPEED_1GBPS = 0x3,
+-      PHY_LINK_SPEED_10GBPS = 0x4
+-};
+-
+-struct be_cmd_resp_link_status {
+-      struct be_cmd_resp_hdr hdr;
+-      u8 physical_port;
+-      u8 mac_duplex;
+-      u8 mac_speed;
+-      u8 mac_fault;
+-      u8 mgmt_mac_duplex;
+-      u8 mgmt_mac_speed;
+-      u16 rsvd0;
+-} __packed;
+-
+-/******************** Get FW Version *******************/
+-#define FW_VER_LEN                    32
+-struct be_cmd_req_get_fw_version {
+-      struct be_cmd_req_hdr hdr;
+-      u8 rsvd0[FW_VER_LEN];
+-      u8 rsvd1[FW_VER_LEN];
+-} __packed;
+-
+-struct be_cmd_resp_get_fw_version {
+-      struct be_cmd_resp_hdr hdr;
+-      u8 firmware_version_string[FW_VER_LEN];
+-      u8 fw_on_flash_version_string[FW_VER_LEN];
+-} __packed;
+-
+-/******************** Set Flow Contrl *******************/
+-struct be_cmd_req_set_flow_control {
+-      struct be_cmd_req_hdr hdr;
+-      u16 tx_flow_control;
+-      u16 rx_flow_control;
+-} __packed;
+-
+-/******************** Get Flow Contrl *******************/
+-struct be_cmd_req_get_flow_control {
+-      struct be_cmd_req_hdr hdr;
+-      u32 rsvd;
+-};
+-
+-struct be_cmd_resp_get_flow_control {
+-      struct be_cmd_resp_hdr hdr;
+-      u16 tx_flow_control;
+-      u16 rx_flow_control;
+-} __packed;
+-
+-/******************** Modify EQ Delay *******************/
+-struct be_cmd_req_modify_eq_delay {
+-      struct be_cmd_req_hdr hdr;
+-      u32 num_eq;
+-      struct {
+-              u32 eq_id;
+-              u32 phase;
+-              u32 delay_multiplier;
+-      } delay[8];
+-} __packed;
+-
+-struct be_cmd_resp_modify_eq_delay {
+-      struct be_cmd_resp_hdr hdr;
+-      u32 rsvd0;
+-} __packed;
+-
+-/******************** Get FW Config *******************/
+-struct be_cmd_req_query_fw_cfg {
+-      struct be_cmd_req_hdr hdr;
+-      u32 rsvd[30];
+-};
+-
+-struct be_cmd_resp_query_fw_cfg {
+-      struct be_cmd_resp_hdr hdr;
+-      u32 be_config_number;
+-      u32 asic_revision;
+-      u32 phys_port;
+-      u32 function_mode;
+-      u32 rsvd[26];
+-};
+-
+-extern int be_pci_fnum_get(struct be_ctrl_info *ctrl);
+-extern int be_cmd_POST(struct be_ctrl_info *ctrl);
+-extern int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+-                      u8 type, bool permanent, u32 if_handle);
+-extern int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+-                      u32 if_id, u32 *pmac_id);
+-extern int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id);
+-extern int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 if_flags, u8 *mac,
+-                      bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
+-extern int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 if_handle);
+-extern int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+-                      struct be_queue_info *eq, int eq_delay);
+-extern int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+-                      struct be_queue_info *cq, struct be_queue_info *eq,
+-                      bool sol_evts, bool no_delay,
+-                      int num_cqe_dma_coalesce);
+-extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+-                      struct be_queue_info *txq,
+-                      struct be_queue_info *cq);
+-extern int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+-                      struct be_queue_info *rxq, u16 cq_id,
+-                      u16 frag_size, u16 max_frame_size, u32 if_id,
+-                      u32 rss);
+-extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+-                      int type);
+-extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+-                      struct be_link_info *link);
+-extern int be_cmd_reset(struct be_ctrl_info *ctrl);
+-extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
+-                      struct be_dma_mem *nonemb_cmd);
+-extern int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver);
+-
+-extern int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd);
+-extern int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id,
+-                      u16 *vtag_array, u32 num, bool untagged,
+-                      bool promiscuous);
+-extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
+-                      u8 port_num, bool en);
+-extern int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id,
+-                      u8 *mac_table, u32 num, bool promiscuous);
+-extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
+-                      u32 tx_fc, u32 rx_fc);
+-extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
+-                      u32 *tx_fc, u32 *rx_fc);
+-extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be_ethtool.c linux-2.6.29-rc3.owrt/drivers/net/benet/be_ethtool.c
+--- linux-2.6.29.owrt/drivers/net/benet/be_ethtool.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be_ethtool.c       1970-01-01 01:00:00.000000000 +0100
+@@ -1,362 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-#include "be.h"
+-#include <linux/ethtool.h>
+-
+-struct be_ethtool_stat {
+-      char desc[ETH_GSTRING_LEN];
+-      int type;
+-      int size;
+-      int offset;
+-};
+-
+-enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT, ERXSTAT};
+-#define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
+-                                      offsetof(_struct, field)
+-#define NETSTAT_INFO(field)   #field, NETSTAT,\
+-                                      FIELDINFO(struct net_device_stats,\
+-                                              field)
+-#define DRVSTAT_INFO(field)   #field, DRVSTAT,\
+-                                      FIELDINFO(struct be_drvr_stats, field)
+-#define MISCSTAT_INFO(field)  #field, MISCSTAT,\
+-                                      FIELDINFO(struct be_rxf_stats, field)
+-#define PORTSTAT_INFO(field)  #field, PORTSTAT,\
+-                                      FIELDINFO(struct be_port_rxf_stats, \
+-                                              field)
+-#define ERXSTAT_INFO(field)   #field, ERXSTAT,\
+-                                      FIELDINFO(struct be_erx_stats, field)
+-
+-static const struct be_ethtool_stat et_stats[] = {
+-      {NETSTAT_INFO(rx_packets)},
+-      {NETSTAT_INFO(tx_packets)},
+-      {NETSTAT_INFO(rx_bytes)},
+-      {NETSTAT_INFO(tx_bytes)},
+-      {NETSTAT_INFO(rx_errors)},
+-      {NETSTAT_INFO(tx_errors)},
+-      {NETSTAT_INFO(rx_dropped)},
+-      {NETSTAT_INFO(tx_dropped)},
+-      {DRVSTAT_INFO(be_tx_reqs)},
+-      {DRVSTAT_INFO(be_tx_stops)},
+-      {DRVSTAT_INFO(be_fwd_reqs)},
+-      {DRVSTAT_INFO(be_tx_wrbs)},
+-      {DRVSTAT_INFO(be_polls)},
+-      {DRVSTAT_INFO(be_tx_events)},
+-      {DRVSTAT_INFO(be_rx_events)},
+-      {DRVSTAT_INFO(be_tx_compl)},
+-      {DRVSTAT_INFO(be_rx_compl)},
+-      {DRVSTAT_INFO(be_ethrx_post_fail)},
+-      {DRVSTAT_INFO(be_802_3_dropped_frames)},
+-      {DRVSTAT_INFO(be_802_3_malformed_frames)},
+-      {DRVSTAT_INFO(be_tx_rate)},
+-      {DRVSTAT_INFO(be_rx_rate)},
+-      {PORTSTAT_INFO(rx_unicast_frames)},
+-      {PORTSTAT_INFO(rx_multicast_frames)},
+-      {PORTSTAT_INFO(rx_broadcast_frames)},
+-      {PORTSTAT_INFO(rx_crc_errors)},
+-      {PORTSTAT_INFO(rx_alignment_symbol_errors)},
+-      {PORTSTAT_INFO(rx_pause_frames)},
+-      {PORTSTAT_INFO(rx_control_frames)},
+-      {PORTSTAT_INFO(rx_in_range_errors)},
+-      {PORTSTAT_INFO(rx_out_range_errors)},
+-      {PORTSTAT_INFO(rx_frame_too_long)},
+-      {PORTSTAT_INFO(rx_address_match_errors)},
+-      {PORTSTAT_INFO(rx_vlan_mismatch)},
+-      {PORTSTAT_INFO(rx_dropped_too_small)},
+-      {PORTSTAT_INFO(rx_dropped_too_short)},
+-      {PORTSTAT_INFO(rx_dropped_header_too_small)},
+-      {PORTSTAT_INFO(rx_dropped_tcp_length)},
+-      {PORTSTAT_INFO(rx_dropped_runt)},
+-      {PORTSTAT_INFO(rx_fifo_overflow)},
+-      {PORTSTAT_INFO(rx_input_fifo_overflow)},
+-      {PORTSTAT_INFO(rx_ip_checksum_errs)},
+-      {PORTSTAT_INFO(rx_tcp_checksum_errs)},
+-      {PORTSTAT_INFO(rx_udp_checksum_errs)},
+-      {PORTSTAT_INFO(rx_non_rss_packets)},
+-      {PORTSTAT_INFO(rx_ipv4_packets)},
+-      {PORTSTAT_INFO(rx_ipv6_packets)},
+-      {PORTSTAT_INFO(tx_unicastframes)},
+-      {PORTSTAT_INFO(tx_multicastframes)},
+-      {PORTSTAT_INFO(tx_broadcastframes)},
+-      {PORTSTAT_INFO(tx_pauseframes)},
+-      {PORTSTAT_INFO(tx_controlframes)},
+-      {MISCSTAT_INFO(rx_drops_no_pbuf)},
+-      {MISCSTAT_INFO(rx_drops_no_txpb)},
+-      {MISCSTAT_INFO(rx_drops_no_erx_descr)},
+-      {MISCSTAT_INFO(rx_drops_no_tpre_descr)},
+-      {MISCSTAT_INFO(rx_drops_too_many_frags)},
+-      {MISCSTAT_INFO(rx_drops_invalid_ring)},
+-      {MISCSTAT_INFO(forwarded_packets)},
+-      {MISCSTAT_INFO(rx_drops_mtu)},
+-      {ERXSTAT_INFO(rx_drops_no_fragments)},
+-};
+-#define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
+-
+-static void
+-be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      strcpy(drvinfo->driver, DRV_NAME);
+-      strcpy(drvinfo->version, DRV_VER);
+-      strncpy(drvinfo->fw_version, adapter->fw_ver, FW_VER_LEN);
+-      strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
+-      drvinfo->testinfo_len = 0;
+-      drvinfo->regdump_len = 0;
+-      drvinfo->eedump_len = 0;
+-}
+-
+-static int
+-be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-
+-      coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
+-
+-      coalesce->rx_coalesce_usecs = rx_eq->cur_eqd;
+-      coalesce->rx_coalesce_usecs_high = rx_eq->max_eqd;
+-      coalesce->rx_coalesce_usecs_low = rx_eq->min_eqd;
+-
+-      coalesce->tx_coalesce_usecs = tx_eq->cur_eqd;
+-      coalesce->tx_coalesce_usecs_high = tx_eq->max_eqd;
+-      coalesce->tx_coalesce_usecs_low = tx_eq->min_eqd;
+-
+-      coalesce->use_adaptive_rx_coalesce = rx_eq->enable_aic;
+-      coalesce->use_adaptive_tx_coalesce = tx_eq->enable_aic;
+-
+-      return 0;
+-}
+-
+-/*
+- * This routine is used to set interrup coalescing delay *as well as*
+- * the number of pkts to coalesce for LRO.
+- */
+-static int
+-be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-      u32 tx_max, tx_min, tx_cur;
+-      u32 rx_max, rx_min, rx_cur;
+-      int status = 0;
+-
+-      if (coalesce->use_adaptive_tx_coalesce == 1)
+-              return -EINVAL;
+-
+-      adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
+-      if (adapter->max_rx_coal > MAX_SKB_FRAGS)
+-              adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+-
+-      /* if AIC is being turned on now, start with an EQD of 0 */
+-      if (rx_eq->enable_aic == 0 &&
+-              coalesce->use_adaptive_rx_coalesce == 1) {
+-              rx_eq->cur_eqd = 0;
+-      }
+-      rx_eq->enable_aic = coalesce->use_adaptive_rx_coalesce;
+-
+-      rx_max = coalesce->rx_coalesce_usecs_high;
+-      rx_min = coalesce->rx_coalesce_usecs_low;
+-      rx_cur = coalesce->rx_coalesce_usecs;
+-
+-      tx_max = coalesce->tx_coalesce_usecs_high;
+-      tx_min = coalesce->tx_coalesce_usecs_low;
+-      tx_cur = coalesce->tx_coalesce_usecs;
+-
+-      if (tx_cur > BE_MAX_EQD)
+-              tx_cur = BE_MAX_EQD;
+-      if (tx_eq->cur_eqd != tx_cur) {
+-              status = be_cmd_modify_eqd(ctrl, tx_eq->q.id, tx_cur);
+-              if (!status)
+-                      tx_eq->cur_eqd = tx_cur;
+-      }
+-
+-      if (rx_eq->enable_aic) {
+-              if (rx_max > BE_MAX_EQD)
+-                      rx_max = BE_MAX_EQD;
+-              if (rx_min > rx_max)
+-                      rx_min = rx_max;
+-              rx_eq->max_eqd = rx_max;
+-              rx_eq->min_eqd = rx_min;
+-              if (rx_eq->cur_eqd > rx_max)
+-                      rx_eq->cur_eqd = rx_max;
+-              if (rx_eq->cur_eqd < rx_min)
+-                      rx_eq->cur_eqd = rx_min;
+-      } else {
+-              if (rx_cur > BE_MAX_EQD)
+-                      rx_cur = BE_MAX_EQD;
+-              if (rx_eq->cur_eqd != rx_cur) {
+-                      status = be_cmd_modify_eqd(ctrl, rx_eq->q.id, rx_cur);
+-                      if (!status)
+-                              rx_eq->cur_eqd = rx_cur;
+-              }
+-      }
+-      return 0;
+-}
+-
+-static u32 be_get_rx_csum(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      return adapter->rx_csum;
+-}
+-
+-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      if (data)
+-              adapter->rx_csum = true;
+-      else
+-              adapter->rx_csum = false;
+-
+-      return 0;
+-}
+-
+-static void
+-be_get_ethtool_stats(struct net_device *netdev,
+-              struct ethtool_stats *stats, uint64_t *data)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_drvr_stats *drvr_stats = &adapter->stats.drvr_stats;
+-      struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+-      struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+-      struct be_port_rxf_stats *port_stats =
+-                      &rxf_stats->port[adapter->port_num];
+-      struct net_device_stats *net_stats = &adapter->stats.net_stats;
+-      struct be_erx_stats *erx_stats = &hw_stats->erx;
+-      void *p = NULL;
+-      int i;
+-
+-      for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+-              switch (et_stats[i].type) {
+-              case NETSTAT:
+-                      p = net_stats;
+-                      break;
+-              case DRVSTAT:
+-                      p = drvr_stats;
+-                      break;
+-              case PORTSTAT:
+-                      p = port_stats;
+-                      break;
+-              case MISCSTAT:
+-                      p = rxf_stats;
+-                      break;
+-              case ERXSTAT: /* Currently only one ERX stat is provided */
+-                      p = (u32 *)erx_stats + adapter->rx_obj.q.id;
+-                      break;
+-              }
+-
+-              p = (u8 *)p + et_stats[i].offset;
+-              data[i] = (et_stats[i].size == sizeof(u64)) ?
+-                              *(u64 *)p: *(u32 *)p;
+-      }
+-
+-      return;
+-}
+-
+-static void
+-be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
+-              uint8_t *data)
+-{
+-      int i;
+-      switch (stringset) {
+-      case ETH_SS_STATS:
+-              for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+-                      memcpy(data, et_stats[i].desc, ETH_GSTRING_LEN);
+-                      data += ETH_GSTRING_LEN;
+-              }
+-              break;
+-      }
+-}
+-
+-static int be_get_stats_count(struct net_device *netdev)
+-{
+-      return ETHTOOL_STATS_NUM;
+-}
+-
+-static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+-{
+-      ecmd->speed = SPEED_10000;
+-      ecmd->duplex = DUPLEX_FULL;
+-      ecmd->autoneg = AUTONEG_DISABLE;
+-      return 0;
+-}
+-
+-static void
+-be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      ring->rx_max_pending = adapter->rx_obj.q.len;
+-      ring->tx_max_pending = adapter->tx_obj.q.len;
+-
+-      ring->rx_pending = atomic_read(&adapter->rx_obj.q.used);
+-      ring->tx_pending = atomic_read(&adapter->tx_obj.q.used);
+-}
+-
+-static void
+-be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
+-              &ecmd->rx_pause);
+-      ecmd->autoneg = AUTONEG_ENABLE;
+-}
+-
+-static int
+-be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      int status;
+-
+-      if (ecmd->autoneg != AUTONEG_ENABLE)
+-              return -EINVAL;
+-
+-      status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
+-                      ecmd->rx_pause);
+-      if (!status)
+-              dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
+-
+-      return status;
+-}
+-
+-struct ethtool_ops be_ethtool_ops = {
+-      .get_settings = be_get_settings,
+-      .get_drvinfo = be_get_drvinfo,
+-      .get_link = ethtool_op_get_link,
+-      .get_coalesce = be_get_coalesce,
+-      .set_coalesce = be_set_coalesce,
+-      .get_ringparam = be_get_ringparam,
+-      .get_pauseparam = be_get_pauseparam,
+-      .set_pauseparam = be_set_pauseparam,
+-      .get_rx_csum = be_get_rx_csum,
+-      .set_rx_csum = be_set_rx_csum,
+-      .get_tx_csum = ethtool_op_get_tx_csum,
+-      .set_tx_csum = ethtool_op_set_tx_csum,
+-      .get_sg = ethtool_op_get_sg,
+-      .set_sg = ethtool_op_set_sg,
+-      .get_tso = ethtool_op_get_tso,
+-      .set_tso = ethtool_op_set_tso,
+-      .get_strings = be_get_stat_strings,
+-      .get_stats_count = be_get_stats_count,
+-      .get_ethtool_stats = be_get_ethtool_stats,
+-};
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be.h linux-2.6.29-rc3.owrt/drivers/net/benet/be.h
+--- linux-2.6.29.owrt/drivers/net/benet/be.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be.h       1970-01-01 01:00:00.000000000 +0100
+@@ -1,328 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-#ifndef BE_H
+-#define BE_H
+-
+-#include <linux/pci.h>
+-#include <linux/etherdevice.h>
+-#include <linux/version.h>
+-#include <linux/delay.h>
+-#include <net/tcp.h>
+-#include <net/ip.h>
+-#include <net/ipv6.h>
+-#include <linux/if_vlan.h>
+-#include <linux/workqueue.h>
+-#include <linux/interrupt.h>
+-#include <linux/inet_lro.h>
+-
+-#include "be_hw.h"
+-
+-#define DRV_VER                       "2.0.348"
+-#define DRV_NAME              "be2net"
+-#define BE_NAME                       "ServerEngines BladeEngine2 10Gbps NIC"
+-#define DRV_DESC              BE_NAME "Driver"
+-
+-/* Number of bytes of an RX frame that are copied to skb->data */
+-#define BE_HDR_LEN            64
+-#define BE_MAX_JUMBO_FRAME_SIZE       9018
+-#define BE_MIN_MTU            256
+-
+-#define BE_NUM_VLANS_SUPPORTED        64
+-#define BE_MAX_EQD            96
+-#define       BE_MAX_TX_FRAG_COUNT    30
+-
+-#define EVNT_Q_LEN            1024
+-#define TX_Q_LEN              2048
+-#define TX_CQ_LEN             1024
+-#define RX_Q_LEN              1024    /* Does not support any other value */
+-#define RX_CQ_LEN             1024
+-#define MCC_Q_LEN             64      /* total size not to exceed 8 pages */
+-#define MCC_CQ_LEN            256
+-
+-#define BE_NAPI_WEIGHT                64
+-#define MAX_RX_POST           BE_NAPI_WEIGHT /* Frags posted at a time */
+-#define RX_FRAGS_REFILL_WM    (RX_Q_LEN - MAX_RX_POST)
+-
+-#define BE_MAX_LRO_DESCRIPTORS  16
+-#define BE_MAX_FRAGS_PER_FRAME  16
+-
+-struct be_dma_mem {
+-      void *va;
+-      dma_addr_t dma;
+-      u32 size;
+-};
+-
+-struct be_queue_info {
+-      struct be_dma_mem dma_mem;
+-      u16 len;
+-      u16 entry_size; /* Size of an element in the queue */
+-      u16 id;
+-      u16 tail, head;
+-      bool created;
+-      atomic_t used;  /* Number of valid elements in the queue */
+-};
+-
+-struct be_ctrl_info {
+-      u8 __iomem *csr;
+-      u8 __iomem *db;         /* Door Bell */
+-      u8 __iomem *pcicfg;     /* PCI config space */
+-      int pci_func;
+-
+-      /* Mbox used for cmd request/response */
+-      spinlock_t cmd_lock;    /* For serializing cmds to BE card */
+-      struct be_dma_mem mbox_mem;
+-      /* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+-       * is stored for freeing purpose */
+-      struct be_dma_mem mbox_mem_alloced;
+-};
+-
+-#include "be_cmds.h"
+-
+-struct be_drvr_stats {
+-      u32 be_tx_reqs;         /* number of TX requests initiated */
+-      u32 be_tx_stops;        /* number of times TX Q was stopped */
+-      u32 be_fwd_reqs;        /* number of send reqs through forwarding i/f */
+-      u32 be_tx_wrbs;         /* number of tx WRBs used */
+-      u32 be_tx_events;       /* number of tx completion events  */
+-      u32 be_tx_compl;        /* number of tx completion entries processed */
+-      u64 be_tx_jiffies;
+-      ulong be_tx_bytes;
+-      ulong be_tx_bytes_prev;
+-      u32 be_tx_rate;
+-
+-      u32 cache_barrier[16];
+-
+-      u32 be_ethrx_post_fail;/* number of ethrx buffer alloc failures */
+-      u32 be_polls;           /* number of times NAPI called poll function */
+-      u32 be_rx_events;       /* number of ucast rx completion events  */
+-      u32 be_rx_compl;        /* number of rx completion entries processed */
+-      u32 be_lro_hgram_data[8];       /* histogram of LRO data packets */
+-      u32 be_lro_hgram_ack[8];        /* histogram of LRO ACKs */
+-      u64 be_rx_jiffies;
+-      ulong be_rx_bytes;
+-      ulong be_rx_bytes_prev;
+-      u32 be_rx_rate;
+-      /* number of non ether type II frames dropped where
+-       * frame len > length field of Mac Hdr */
+-      u32 be_802_3_dropped_frames;
+-      /* number of non ether type II frames malformed where
+-       * in frame len < length field of Mac Hdr */
+-      u32 be_802_3_malformed_frames;
+-      u32 be_rxcp_err;        /* Num rx completion entries w/ err set. */
+-      ulong rx_fps_jiffies;   /* jiffies at last FPS calc */
+-      u32 be_rx_frags;
+-      u32 be_prev_rx_frags;
+-      u32 be_rx_fps;          /* Rx frags per second */
+-};
+-
+-struct be_stats_obj {
+-      struct be_drvr_stats drvr_stats;
+-      struct net_device_stats net_stats;
+-      struct be_dma_mem cmd;
+-};
+-
+-struct be_eq_obj {
+-      struct be_queue_info q;
+-      char desc[32];
+-
+-      /* Adaptive interrupt coalescing (AIC) info */
+-      bool enable_aic;
+-      u16 min_eqd;            /* in usecs */
+-      u16 max_eqd;            /* in usecs */
+-      u16 cur_eqd;            /* in usecs */
+-
+-      struct napi_struct napi;
+-};
+-
+-struct be_tx_obj {
+-      struct be_queue_info q;
+-      struct be_queue_info cq;
+-      /* Remember the skbs that were transmitted */
+-      struct sk_buff *sent_skb_list[TX_Q_LEN];
+-};
+-
+-/* Struct to remember the pages posted for rx frags */
+-struct be_rx_page_info {
+-      struct page *page;
+-      dma_addr_t bus;
+-      u16 page_offset;
+-      bool last_page_user;
+-};
+-
+-struct be_rx_obj {
+-      struct be_queue_info q;
+-      struct be_queue_info cq;
+-      struct be_rx_page_info page_info_tbl[RX_Q_LEN];
+-      struct net_lro_mgr lro_mgr;
+-      struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
+-};
+-
+-#define BE_NUM_MSIX_VECTORS           2       /* 1 each for Tx and Rx */
+-struct be_adapter {
+-      struct pci_dev *pdev;
+-      struct net_device *netdev;
+-
+-      /* Mbox, pci config, csr address information */
+-      struct be_ctrl_info ctrl;
+-
+-      struct msix_entry msix_entries[BE_NUM_MSIX_VECTORS];
+-      bool msix_enabled;
+-      bool isr_registered;
+-
+-      /* TX Rings */
+-      struct be_eq_obj tx_eq;
+-      struct be_tx_obj tx_obj;
+-
+-      u32 cache_line_break[8];
+-
+-      /* Rx rings */
+-      struct be_eq_obj rx_eq;
+-      struct be_rx_obj rx_obj;
+-      u32 big_page_size;      /* Compounded page size shared by rx wrbs */
+-      bool rx_post_starved;   /* Zero rx frags have been posted to BE */
+-
+-      struct vlan_group *vlan_grp;
+-      u16 num_vlans;
+-      u8 vlan_tag[VLAN_GROUP_ARRAY_LEN];
+-
+-      struct be_stats_obj stats;
+-      /* Work queue used to perform periodic tasks like getting statistics */
+-      struct delayed_work work;
+-
+-      /* Ethtool knobs and info */
+-      bool rx_csum;           /* BE card must perform rx-checksumming */
+-      u32 max_rx_coal;
+-      char fw_ver[FW_VER_LEN];
+-      u32 if_handle;          /* Used to configure filtering */
+-      u32 pmac_id;            /* MAC addr handle used by BE card */
+-
+-      struct be_link_info link;
+-      u32 port_num;
+-};
+-
+-extern struct ethtool_ops be_ethtool_ops;
+-
+-#define drvr_stats(adapter)           (&adapter->stats.drvr_stats)
+-
+-#define BE_SET_NETDEV_OPS(netdev, ops)        (netdev->netdev_ops = ops)
+-
+-static inline u32 MODULO(u16 val, u16 limit)
+-{
+-      BUG_ON(limit & (limit - 1));
+-      return val & (limit - 1);
+-}
+-
+-static inline void index_adv(u16 *index, u16 val, u16 limit)
+-{
+-      *index = MODULO((*index + val), limit);
+-}
+-
+-static inline void index_inc(u16 *index, u16 limit)
+-{
+-      *index = MODULO((*index + 1), limit);
+-}
+-
+-#define PAGE_SHIFT_4K         12
+-#define PAGE_SIZE_4K          (1 << PAGE_SHIFT_4K)
+-
+-/* Returns number of pages spanned by the data starting at the given addr */
+-#define PAGES_4K_SPANNED(_address, size)                              \
+-              ((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) +     \
+-                      (size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+-
+-/* Byte offset into the page corresponding to given address */
+-#define OFFSET_IN_PAGE(addr)                                          \
+-               ((size_t)(addr) & (PAGE_SIZE_4K-1))
+-
+-/* Returns bit offset within a DWORD of a bitfield */
+-#define AMAP_BIT_OFFSET(_struct, field)                               \
+-              (((size_t)&(((_struct *)0)->field))%32)
+-
+-/* Returns the bit mask of the field that is NOT shifted into location. */
+-static inline u32 amap_mask(u32 bitsize)
+-{
+-      return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+-}
+-
+-static inline void
+-amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
+-{
+-      u32 *dw = (u32 *) ptr + dw_offset;
+-      *dw &= ~(mask << offset);
+-      *dw |= (mask & value) << offset;
+-}
+-
+-#define AMAP_SET_BITS(_struct, field, ptr, val)                               \
+-              amap_set(ptr,                                           \
+-                      offsetof(_struct, field)/32,                    \
+-                      amap_mask(sizeof(((_struct *)0)->field)),       \
+-                      AMAP_BIT_OFFSET(_struct, field),                \
+-                      val)
+-
+-static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+-{
+-      u32 *dw = (u32 *) ptr;
+-      return mask & (*(dw + dw_offset) >> offset);
+-}
+-
+-#define AMAP_GET_BITS(_struct, field, ptr)                            \
+-              amap_get(ptr,                                           \
+-                      offsetof(_struct, field)/32,                    \
+-                      amap_mask(sizeof(((_struct *)0)->field)),       \
+-                      AMAP_BIT_OFFSET(_struct, field))
+-
+-#define be_dws_cpu_to_le(wrb, len)    swap_dws(wrb, len)
+-#define be_dws_le_to_cpu(wrb, len)    swap_dws(wrb, len)
+-static inline void swap_dws(void *wrb, int len)
+-{
+-#ifdef __BIG_ENDIAN
+-      u32 *dw = wrb;
+-      BUG_ON(len % 4);
+-      do {
+-              *dw = cpu_to_le32(*dw);
+-              dw++;
+-              len -= 4;
+-      } while (len);
+-#endif                                /* __BIG_ENDIAN */
+-}
+-
+-static inline u8 is_tcp_pkt(struct sk_buff *skb)
+-{
+-      u8 val = 0;
+-
+-      if (ip_hdr(skb)->version == 4)
+-              val = (ip_hdr(skb)->protocol == IPPROTO_TCP);
+-      else if (ip_hdr(skb)->version == 6)
+-              val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_TCP);
+-
+-      return val;
+-}
+-
+-static inline u8 is_udp_pkt(struct sk_buff *skb)
+-{
+-      u8 val = 0;
+-
+-      if (ip_hdr(skb)->version == 4)
+-              val = (ip_hdr(skb)->protocol == IPPROTO_UDP);
+-      else if (ip_hdr(skb)->version == 6)
+-              val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_UDP);
+-
+-      return val;
+-}
+-
+-#endif                                /* BE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be_hw.h linux-2.6.29-rc3.owrt/drivers/net/benet/be_hw.h
+--- linux-2.6.29.owrt/drivers/net/benet/be_hw.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be_hw.h    1970-01-01 01:00:00.000000000 +0100
+@@ -1,211 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-/********* Mailbox door bell *************/
+-/* Used for driver communication with the FW.
+- * The software must write this register twice to post any command. First,
+- * it writes the register with hi=1 and the upper bits of the physical address
+- * for the MAILBOX structure. Software must poll the ready bit until this
+- * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+- * bits in the address. It must poll the ready bit until the command is
+- * complete. Upon completion, the MAILBOX will contain a valid completion
+- * queue entry.
+- */
+-#define MPU_MAILBOX_DB_OFFSET 0x160
+-#define MPU_MAILBOX_DB_RDY_MASK       0x1     /* bit 0 */
+-#define MPU_MAILBOX_DB_HI_MASK        0x2     /* bit 1 */
+-
+-#define MPU_EP_CONTROL                0
+-
+-/********** MPU semphore ******************/
+-#define MPU_EP_SEMAPHORE_OFFSET       0xac
+-#define EP_SEMAPHORE_POST_STAGE_MASK  0x0000FFFF
+-#define EP_SEMAPHORE_POST_ERR_MASK    0x1
+-#define EP_SEMAPHORE_POST_ERR_SHIFT   31
+-/* MPU semphore POST stage values */
+-#define POST_STAGE_AWAITING_HOST_RDY  0x1 /* FW awaiting goahead from host */
+-#define POST_STAGE_HOST_RDY           0x2 /* Host has given go-ahed to FW */
+-#define POST_STAGE_BE_RESET           0x3 /* Host wants to reset chip */
+-#define POST_STAGE_ARMFW_RDY          0xc000  /* FW is done with POST */
+-
+-/********* Memory BAR register ************/
+-#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET    0xfc
+-/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
+- * Disable" may still globally block interrupts in addition to individual
+- * interrupt masks; a mechanism for the device driver to block all interrupts
+- * atomically without having to arbitrate for the PCI Interrupt Disable bit
+- * with the OS.
+- */
+-#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK    (1 << 29) /* bit 29 */
+-/* PCI physical function number */
+-#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK       0x7     /* bits 26 - 28 */
+-#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT      26
+-
+-/********* Event Q door bell *************/
+-#define DB_EQ_OFFSET                  DB_CQ_OFFSET
+-#define DB_EQ_RING_ID_MASK            0x1FF   /* bits 0 - 8 */
+-/* Clear the interrupt for this eq */
+-#define DB_EQ_CLR_SHIFT                       (9)     /* bit 9 */
+-/* Must be 1 */
+-#define DB_EQ_EVNT_SHIFT                      (10)    /* bit 10 */
+-/* Number of event entries processed */
+-#define DB_EQ_NUM_POPPED_SHIFT                (16)    /* bits 16 - 28 */
+-/* Rearm bit */
+-#define DB_EQ_REARM_SHIFT             (29)    /* bit 29 */
+-
+-/********* Compl Q door bell *************/
+-#define DB_CQ_OFFSET                  0x120
+-#define DB_CQ_RING_ID_MASK            0x3FF   /* bits 0 - 9 */
+-/* Number of event entries processed */
+-#define DB_CQ_NUM_POPPED_SHIFT                (16)    /* bits 16 - 28 */
+-/* Rearm bit */
+-#define DB_CQ_REARM_SHIFT             (29)    /* bit 29 */
+-
+-/********** TX ULP door bell *************/
+-#define DB_TXULP1_OFFSET              0x60
+-#define DB_TXULP_RING_ID_MASK         0x7FF   /* bits 0 - 10 */
+-/* Number of tx entries posted */
+-#define DB_TXULP_NUM_POSTED_SHIFT     (16)    /* bits 16 - 29 */
+-#define DB_TXULP_NUM_POSTED_MASK      0x3FFF  /* bits 16 - 29 */
+-
+-/********** RQ(erx) door bell ************/
+-#define DB_RQ_OFFSET                  0x100
+-#define DB_RQ_RING_ID_MASK            0x3FF   /* bits 0 - 9 */
+-/* Number of rx frags posted */
+-#define DB_RQ_NUM_POSTED_SHIFT                (24)    /* bits 24 - 31 */
+-
+-/*
+- * BE descriptors: host memory data structures whose formats
+- * are hardwired in BE silicon.
+- */
+-/* Event Queue Descriptor */
+-#define EQ_ENTRY_VALID_MASK           0x1     /* bit 0 */
+-#define EQ_ENTRY_RES_ID_MASK          0xFFFF  /* bits 16 - 31 */
+-#define EQ_ENTRY_RES_ID_SHIFT                 16
+-struct be_eq_entry {
+-      u32 evt;
+-};
+-
+-/* TX Queue Descriptor */
+-#define ETH_WRB_FRAG_LEN_MASK         0xFFFF
+-struct be_eth_wrb {
+-      u32 frag_pa_hi;         /* dword 0 */
+-      u32 frag_pa_lo;         /* dword 1 */
+-      u32 rsvd0;              /* dword 2 */
+-      u32 frag_len;           /* dword 3: bits 0 - 15 */
+-} __packed;
+-
+-/* Pseudo amap definition for eth_hdr_wrb in which each bit of the
+- * actual structure is defined as a byte : used to calculate
+- * offset/shift/mask of each field */
+-struct amap_eth_hdr_wrb {
+-      u8 rsvd0[32];           /* dword 0 */
+-      u8 rsvd1[32];           /* dword 1 */
+-      u8 complete;            /* dword 2 */
+-      u8 event;
+-      u8 crc;
+-      u8 forward;
+-      u8 ipsec;
+-      u8 mgmt;
+-      u8 ipcs;
+-      u8 udpcs;
+-      u8 tcpcs;
+-      u8 lso;
+-      u8 vlan;
+-      u8 gso[2];
+-      u8 num_wrb[5];
+-      u8 lso_mss[14];
+-      u8 len[16];             /* dword 3 */
+-      u8 vlan_tag[16];
+-} __packed;
+-
+-struct be_eth_hdr_wrb {
+-      u32 dw[4];
+-};
+-
+-/* TX Compl Queue Descriptor */
+-
+-/* Pseudo amap definition for eth_tx_compl in which each bit of the
+- * actual structure is defined as a byte: used to calculate
+- * offset/shift/mask of each field */
+-struct amap_eth_tx_compl {
+-      u8 wrb_index[16];       /* dword 0 */
+-      u8 ct[2];               /* dword 0 */
+-      u8 port[2];             /* dword 0 */
+-      u8 rsvd0[8];            /* dword 0 */
+-      u8 status[4];           /* dword 0 */
+-      u8 user_bytes[16];      /* dword 1 */
+-      u8 nwh_bytes[8];        /* dword 1 */
+-      u8 lso;                 /* dword 1 */
+-      u8 cast_enc[2];         /* dword 1 */
+-      u8 rsvd1[5];            /* dword 1 */
+-      u8 rsvd2[32];           /* dword 2 */
+-      u8 pkts[16];            /* dword 3 */
+-      u8 ringid[11];          /* dword 3 */
+-      u8 hash_val[4];         /* dword 3 */
+-      u8 valid;               /* dword 3 */
+-} __packed;
+-
+-struct be_eth_tx_compl {
+-      u32 dw[4];
+-};
+-
+-/* RX Queue Descriptor */
+-struct be_eth_rx_d {
+-      u32 fragpa_hi;
+-      u32 fragpa_lo;
+-};
+-
+-/* RX Compl Queue Descriptor */
+-
+-/* Pseudo amap definition for eth_rx_compl in which each bit of the
+- * actual structure is defined as a byte: used to calculate
+- * offset/shift/mask of each field */
+-struct amap_eth_rx_compl {
+-      u8 vlan_tag[16];        /* dword 0 */
+-      u8 pktsize[14];         /* dword 0 */
+-      u8 port;                /* dword 0 */
+-      u8 ip_opt;              /* dword 0 */
+-      u8 err;                 /* dword 1 */
+-      u8 rsshp;               /* dword 1 */
+-      u8 ipf;                 /* dword 1 */
+-      u8 tcpf;                /* dword 1 */
+-      u8 udpf;                /* dword 1 */
+-      u8 ipcksm;              /* dword 1 */
+-      u8 l4_cksm;             /* dword 1 */
+-      u8 ip_version;          /* dword 1 */
+-      u8 macdst[6];           /* dword 1 */
+-      u8 vtp;                 /* dword 1 */
+-      u8 rsvd0;               /* dword 1 */
+-      u8 fragndx[10];         /* dword 1 */
+-      u8 ct[2];               /* dword 1 */
+-      u8 sw;                  /* dword 1 */
+-      u8 numfrags[3];         /* dword 1 */
+-      u8 rss_flush;           /* dword 2 */
+-      u8 cast_enc[2];         /* dword 2 */
+-      u8 qnq;                 /* dword 2 */
+-      u8 rss_bank;            /* dword 2 */
+-      u8 rsvd1[23];           /* dword 2 */
+-      u8 lro_pkt;             /* dword 2 */
+-      u8 rsvd2[2];            /* dword 2 */
+-      u8 valid;               /* dword 2 */
+-      u8 rsshash[32];         /* dword 3 */
+-} __packed;
+-
+-struct be_eth_rx_compl {
+-      u32 dw[4];
+-};
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/be_main.c linux-2.6.29-rc3.owrt/drivers/net/benet/be_main.c
+--- linux-2.6.29.owrt/drivers/net/benet/be_main.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/be_main.c  1970-01-01 01:00:00.000000000 +0100
+@@ -1,1911 +0,0 @@
+-/*
+- * Copyright (C) 2005 - 2009 ServerEngines
+- * All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License version 2
+- * as published by the Free Software Foundation.  The full GNU General
+- * Public License is included in this distribution in the file called COPYING.
+- *
+- * Contact Information:
+- * linux-drivers@serverengines.com
+- *
+- * ServerEngines
+- * 209 N. Fair Oaks Ave
+- * Sunnyvale, CA 94085
+- */
+-
+-#include "be.h"
+-
+-MODULE_VERSION(DRV_VER);
+-MODULE_DEVICE_TABLE(pci, be_dev_ids);
+-MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
+-MODULE_AUTHOR("ServerEngines Corporation");
+-MODULE_LICENSE("GPL");
+-
+-static unsigned int rx_frag_size = 2048;
+-module_param(rx_frag_size, uint, S_IRUGO);
+-MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
+-
+-#define BE_VENDOR_ID          0x19a2
+-#define BE2_DEVICE_ID_1       0x0211
+-static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
+-      { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+-      { 0 }
+-};
+-MODULE_DEVICE_TABLE(pci, be_dev_ids);
+-
+-static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
+-{
+-      struct be_dma_mem *mem = &q->dma_mem;
+-      if (mem->va)
+-              pci_free_consistent(adapter->pdev, mem->size,
+-                      mem->va, mem->dma);
+-}
+-
+-static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
+-              u16 len, u16 entry_size)
+-{
+-      struct be_dma_mem *mem = &q->dma_mem;
+-
+-      memset(q, 0, sizeof(*q));
+-      q->len = len;
+-      q->entry_size = entry_size;
+-      mem->size = len * entry_size;
+-      mem->va = pci_alloc_consistent(adapter->pdev, mem->size, &mem->dma);
+-      if (!mem->va)
+-              return -1;
+-      memset(mem->va, 0, mem->size);
+-      return 0;
+-}
+-
+-static inline void *queue_head_node(struct be_queue_info *q)
+-{
+-      return q->dma_mem.va + q->head * q->entry_size;
+-}
+-
+-static inline void *queue_tail_node(struct be_queue_info *q)
+-{
+-      return q->dma_mem.va + q->tail * q->entry_size;
+-}
+-
+-static inline void queue_head_inc(struct be_queue_info *q)
+-{
+-      index_inc(&q->head, q->len);
+-}
+-
+-static inline void queue_tail_inc(struct be_queue_info *q)
+-{
+-      index_inc(&q->tail, q->len);
+-}
+-
+-static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
+-{
+-      u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+-      u32 reg = ioread32(addr);
+-      u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+-      if (!enabled && enable) {
+-              reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+-      } else if (enabled && !enable) {
+-              reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+-      } else {
+-              printk(KERN_WARNING DRV_NAME
+-                      ": bad value in membar_int_ctrl reg=0x%x\n", reg);
+-              return;
+-      }
+-      iowrite32(reg, addr);
+-}
+-
+-static void be_rxq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+-{
+-      u32 val = 0;
+-      val |= qid & DB_RQ_RING_ID_MASK;
+-      val |= posted << DB_RQ_NUM_POSTED_SHIFT;
+-      iowrite32(val, ctrl->db + DB_RQ_OFFSET);
+-}
+-
+-static void be_txq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+-{
+-      u32 val = 0;
+-      val |= qid & DB_TXULP_RING_ID_MASK;
+-      val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
+-      iowrite32(val, ctrl->db + DB_TXULP1_OFFSET);
+-}
+-
+-static void be_eq_notify(struct be_ctrl_info *ctrl, u16 qid,
+-              bool arm, bool clear_int, u16 num_popped)
+-{
+-      u32 val = 0;
+-      val |= qid & DB_EQ_RING_ID_MASK;
+-      if (arm)
+-              val |= 1 << DB_EQ_REARM_SHIFT;
+-      if (clear_int)
+-              val |= 1 << DB_EQ_CLR_SHIFT;
+-      val |= 1 << DB_EQ_EVNT_SHIFT;
+-      val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
+-      iowrite32(val, ctrl->db + DB_EQ_OFFSET);
+-}
+-
+-static void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
+-              bool arm, u16 num_popped)
+-{
+-      u32 val = 0;
+-      val |= qid & DB_CQ_RING_ID_MASK;
+-      if (arm)
+-              val |= 1 << DB_CQ_REARM_SHIFT;
+-      val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
+-      iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+-}
+-
+-
+-static int be_mac_addr_set(struct net_device *netdev, void *p)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct sockaddr *addr = p;
+-      int status = 0;
+-
+-      if (netif_running(netdev)) {
+-              status = be_cmd_pmac_del(&adapter->ctrl, adapter->if_handle,
+-                              adapter->pmac_id);
+-              if (status)
+-                      return status;
+-
+-              status = be_cmd_pmac_add(&adapter->ctrl, (u8 *)addr->sa_data,
+-                              adapter->if_handle, &adapter->pmac_id);
+-      }
+-
+-      if (!status)
+-              memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+-
+-      return status;
+-}
+-
+-static void netdev_stats_update(struct be_adapter *adapter)
+-{
+-      struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+-      struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+-      struct be_port_rxf_stats *port_stats =
+-                      &rxf_stats->port[adapter->port_num];
+-      struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+-
+-      dev_stats->rx_packets = port_stats->rx_total_frames;
+-      dev_stats->tx_packets = port_stats->tx_unicastframes +
+-              port_stats->tx_multicastframes + port_stats->tx_broadcastframes;
+-      dev_stats->rx_bytes = (u64) port_stats->rx_bytes_msd << 32 |
+-                              (u64) port_stats->rx_bytes_lsd;
+-      dev_stats->tx_bytes = (u64) port_stats->tx_bytes_msd << 32 |
+-                              (u64) port_stats->tx_bytes_lsd;
+-
+-      /* bad pkts received */
+-      dev_stats->rx_errors = port_stats->rx_crc_errors +
+-              port_stats->rx_alignment_symbol_errors +
+-              port_stats->rx_in_range_errors +
+-              port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+-
+-      /*  packet transmit problems */
+-      dev_stats->tx_errors = 0;
+-
+-      /*  no space in linux buffers */
+-      dev_stats->rx_dropped = 0;
+-
+-      /* no space available in linux */
+-      dev_stats->tx_dropped = 0;
+-
+-      dev_stats->multicast = port_stats->tx_multicastframes;
+-      dev_stats->collisions = 0;
+-
+-      /* detailed rx errors */
+-      dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
+-              port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+-      /* receive ring buffer overflow */
+-      dev_stats->rx_over_errors = 0;
+-      dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
+-
+-      /* frame alignment errors */
+-      dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+-      /* receiver fifo overrun */
+-      /* drops_no_pbuf is no per i/f, it's per BE card */
+-      dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
+-                                      port_stats->rx_input_fifo_overflow +
+-                                      rxf_stats->rx_drops_no_pbuf;
+-      /* receiver missed packetd */
+-      dev_stats->rx_missed_errors = 0;
+-      /* detailed tx_errors */
+-      dev_stats->tx_aborted_errors = 0;
+-      dev_stats->tx_carrier_errors = 0;
+-      dev_stats->tx_fifo_errors = 0;
+-      dev_stats->tx_heartbeat_errors = 0;
+-      dev_stats->tx_window_errors = 0;
+-}
+-
+-static void be_link_status_update(struct be_adapter *adapter)
+-{
+-      struct be_link_info *prev = &adapter->link;
+-      struct be_link_info now = { 0 };
+-      struct net_device *netdev = adapter->netdev;
+-
+-      be_cmd_link_status_query(&adapter->ctrl, &now);
+-
+-      /* If link came up or went down */
+-      if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
+-                      prev->speed == PHY_LINK_SPEED_ZERO)) {
+-              if (now.speed == PHY_LINK_SPEED_ZERO) {
+-                      netif_stop_queue(netdev);
+-                      netif_carrier_off(netdev);
+-                      printk(KERN_INFO "%s: Link down\n", netdev->name);
+-              } else {
+-                      netif_start_queue(netdev);
+-                      netif_carrier_on(netdev);
+-                      printk(KERN_INFO "%s: Link up\n", netdev->name);
+-              }
+-      }
+-      *prev = now;
+-}
+-
+-/* Update the EQ delay n BE based on the RX frags consumed / sec */
+-static void be_rx_eqd_update(struct be_adapter *adapter)
+-{
+-      u32 eqd;
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+-
+-      /* Update once a second */
+-      if (((jiffies - stats->rx_fps_jiffies) < HZ) || rx_eq->enable_aic == 0)
+-              return;
+-
+-      stats->be_rx_fps = (stats->be_rx_frags - stats->be_prev_rx_frags) /
+-                      ((jiffies - stats->rx_fps_jiffies) / HZ);
+-
+-      stats->rx_fps_jiffies = jiffies;
+-      stats->be_prev_rx_frags = stats->be_rx_frags;
+-      eqd = stats->be_rx_fps / 110000;
+-      eqd = eqd << 3;
+-      if (eqd > rx_eq->max_eqd)
+-              eqd = rx_eq->max_eqd;
+-      if (eqd < rx_eq->min_eqd)
+-              eqd = rx_eq->min_eqd;
+-      if (eqd < 10)
+-              eqd = 0;
+-      if (eqd != rx_eq->cur_eqd)
+-              be_cmd_modify_eqd(ctrl, rx_eq->q.id, eqd);
+-
+-      rx_eq->cur_eqd = eqd;
+-}
+-
+-static struct net_device_stats *be_get_stats(struct net_device *dev)
+-{
+-      struct be_adapter *adapter = netdev_priv(dev);
+-
+-      return &adapter->stats.net_stats;
+-}
+-
+-static void be_tx_stats_update(struct be_adapter *adapter,
+-                      u32 wrb_cnt, u32 copied, bool stopped)
+-{
+-      struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+-      stats->be_tx_reqs++;
+-      stats->be_tx_wrbs += wrb_cnt;
+-      stats->be_tx_bytes += copied;
+-      if (stopped)
+-              stats->be_tx_stops++;
+-
+-      /* Update tx rate once in two seconds */
+-      if ((jiffies - stats->be_tx_jiffies) > 2 * HZ) {
+-              u32 r;
+-              r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) /
+-                      ((u32) (jiffies - stats->be_tx_jiffies) / HZ);
+-              r = (r / 1000000);                      /* M bytes/s */
+-              stats->be_tx_rate = (r * 8);    /* M bits/s */
+-              stats->be_tx_jiffies = jiffies;
+-              stats->be_tx_bytes_prev = stats->be_tx_bytes;
+-      }
+-}
+-
+-/* Determine number of WRB entries needed to xmit data in an skb */
+-static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
+-{
+-      int cnt = 0;
+-      while (skb) {
+-              if (skb->len > skb->data_len)
+-                      cnt++;
+-              cnt += skb_shinfo(skb)->nr_frags;
+-              skb = skb_shinfo(skb)->frag_list;
+-      }
+-      /* to account for hdr wrb */
+-      cnt++;
+-      if (cnt & 1) {
+-              /* add a dummy to make it an even num */
+-              cnt++;
+-              *dummy = true;
+-      } else
+-              *dummy = false;
+-      BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
+-      return cnt;
+-}
+-
+-static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len)
+-{
+-      wrb->frag_pa_hi = upper_32_bits(addr);
+-      wrb->frag_pa_lo = addr & 0xFFFFFFFF;
+-      wrb->frag_len = len & ETH_WRB_FRAG_LEN_MASK;
+-}
+-
+-static void wrb_fill_hdr(struct be_eth_hdr_wrb *hdr, struct sk_buff *skb,
+-              bool vlan, u32 wrb_cnt, u32 len)
+-{
+-      memset(hdr, 0, sizeof(*hdr));
+-
+-      AMAP_SET_BITS(struct amap_eth_hdr_wrb, crc, hdr, 1);
+-
+-      if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
+-              AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1);
+-              AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss,
+-                      hdr, skb_shinfo(skb)->gso_size);
+-      } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+-              if (is_tcp_pkt(skb))
+-                      AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
+-              else if (is_udp_pkt(skb))
+-                      AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1);
+-      }
+-
+-      if (vlan && vlan_tx_tag_present(skb)) {
+-              AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan, hdr, 1);
+-              AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan_tag,
+-                      hdr, vlan_tx_tag_get(skb));
+-      }
+-
+-      AMAP_SET_BITS(struct amap_eth_hdr_wrb, event, hdr, 1);
+-      AMAP_SET_BITS(struct amap_eth_hdr_wrb, complete, hdr, 1);
+-      AMAP_SET_BITS(struct amap_eth_hdr_wrb, num_wrb, hdr, wrb_cnt);
+-      AMAP_SET_BITS(struct amap_eth_hdr_wrb, len, hdr, len);
+-}
+-
+-
+-static int make_tx_wrbs(struct be_adapter *adapter,
+-              struct sk_buff *skb, u32 wrb_cnt, bool dummy_wrb)
+-{
+-      u64 busaddr;
+-      u32 i, copied = 0;
+-      struct pci_dev *pdev = adapter->pdev;
+-      struct sk_buff *first_skb = skb;
+-      struct be_queue_info *txq = &adapter->tx_obj.q;
+-      struct be_eth_wrb *wrb;
+-      struct be_eth_hdr_wrb *hdr;
+-
+-      atomic_add(wrb_cnt, &txq->used);
+-      hdr = queue_head_node(txq);
+-      queue_head_inc(txq);
+-
+-      while (skb) {
+-              if (skb->len > skb->data_len) {
+-                      int len = skb->len - skb->data_len;
+-                      busaddr = pci_map_single(pdev, skb->data, len,
+-                                      PCI_DMA_TODEVICE);
+-                      wrb = queue_head_node(txq);
+-                      wrb_fill(wrb, busaddr, len);
+-                      be_dws_cpu_to_le(wrb, sizeof(*wrb));
+-                      queue_head_inc(txq);
+-                      copied += len;
+-              }
+-
+-              for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+-                      struct skb_frag_struct *frag =
+-                              &skb_shinfo(skb)->frags[i];
+-                      busaddr = pci_map_page(pdev, frag->page,
+-                                      frag->page_offset,
+-                                      frag->size, PCI_DMA_TODEVICE);
+-                      wrb = queue_head_node(txq);
+-                      wrb_fill(wrb, busaddr, frag->size);
+-                      be_dws_cpu_to_le(wrb, sizeof(*wrb));
+-                      queue_head_inc(txq);
+-                      copied += frag->size;
+-              }
+-              skb = skb_shinfo(skb)->frag_list;
+-      }
+-
+-      if (dummy_wrb) {
+-              wrb = queue_head_node(txq);
+-              wrb_fill(wrb, 0, 0);
+-              be_dws_cpu_to_le(wrb, sizeof(*wrb));
+-              queue_head_inc(txq);
+-      }
+-
+-      wrb_fill_hdr(hdr, first_skb, adapter->vlan_grp ? true : false,
+-              wrb_cnt, copied);
+-      be_dws_cpu_to_le(hdr, sizeof(*hdr));
+-
+-      return copied;
+-}
+-
+-static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_tx_obj *tx_obj = &adapter->tx_obj;
+-      struct be_queue_info *txq = &tx_obj->q;
+-      u32 wrb_cnt = 0, copied = 0;
+-      u32 start = txq->head;
+-      bool dummy_wrb, stopped = false;
+-
+-      wrb_cnt = wrb_cnt_for_skb(skb, &dummy_wrb);
+-
+-      copied = make_tx_wrbs(adapter, skb, wrb_cnt, dummy_wrb);
+-
+-      /* record the sent skb in the sent_skb table */
+-      BUG_ON(tx_obj->sent_skb_list[start]);
+-      tx_obj->sent_skb_list[start] = skb;
+-
+-      /* Ensure that txq has space for the next skb; Else stop the queue
+-       * *BEFORE* ringing the tx doorbell, so that we serialze the
+-       * tx compls of the current transmit which'll wake up the queue
+-       */
+-      if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >= txq->len) {
+-              netif_stop_queue(netdev);
+-              stopped = true;
+-      }
+-
+-      be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
+-
+-      netdev->trans_start = jiffies;
+-
+-      be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
+-      return NETDEV_TX_OK;
+-}
+-
+-static int be_change_mtu(struct net_device *netdev, int new_mtu)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      if (new_mtu < BE_MIN_MTU ||
+-                      new_mtu > BE_MAX_JUMBO_FRAME_SIZE) {
+-              dev_info(&adapter->pdev->dev,
+-                      "MTU must be between %d and %d bytes\n",
+-                      BE_MIN_MTU, BE_MAX_JUMBO_FRAME_SIZE);
+-              return -EINVAL;
+-      }
+-      dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n",
+-                      netdev->mtu, new_mtu);
+-      netdev->mtu = new_mtu;
+-      return 0;
+-}
+-
+-/*
+- * if there are BE_NUM_VLANS_SUPPORTED or lesser number of VLANS configured,
+- * program them in BE.  If more than BE_NUM_VLANS_SUPPORTED are configured,
+- * set the BE in promiscuous VLAN mode.
+- */
+-static void be_vid_config(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      u16 vtag[BE_NUM_VLANS_SUPPORTED];
+-      u16 ntags = 0, i;
+-
+-      if (adapter->num_vlans <= BE_NUM_VLANS_SUPPORTED)  {
+-              /* Construct VLAN Table to give to HW */
+-              for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+-                      if (adapter->vlan_tag[i]) {
+-                              vtag[ntags] = cpu_to_le16(i);
+-                              ntags++;
+-                      }
+-              }
+-              be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+-                      vtag, ntags, 1, 0);
+-      } else {
+-              be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+-                      NULL, 0, 1, 1);
+-      }
+-}
+-
+-static void be_vlan_register(struct net_device *netdev, struct vlan_group *grp)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-
+-      be_eq_notify(ctrl, rx_eq->q.id, false, false, 0);
+-      be_eq_notify(ctrl, tx_eq->q.id, false, false, 0);
+-      adapter->vlan_grp = grp;
+-      be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+-      be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+-}
+-
+-static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      adapter->num_vlans++;
+-      adapter->vlan_tag[vid] = 1;
+-
+-      be_vid_config(netdev);
+-}
+-
+-static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      adapter->num_vlans--;
+-      adapter->vlan_tag[vid] = 0;
+-
+-      vlan_group_set_device(adapter->vlan_grp, vid, NULL);
+-      be_vid_config(netdev);
+-}
+-
+-static void be_set_multicast_filter(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct dev_mc_list *mc_ptr;
+-      u8 mac_addr[32][ETH_ALEN];
+-      int i = 0;
+-
+-      if (netdev->flags & IFF_ALLMULTI) {
+-              /* set BE in Multicast promiscuous */
+-              be_cmd_mcast_mac_set(&adapter->ctrl,
+-                                      adapter->if_handle, NULL, 0, true);
+-              return;
+-      }
+-
+-      for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+-              memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
+-              if (++i >= 32) {
+-                      be_cmd_mcast_mac_set(&adapter->ctrl,
+-                              adapter->if_handle, &mac_addr[0][0], i, false);
+-                      i = 0;
+-              }
+-
+-      }
+-
+-      if (i) {
+-              /* reset the promiscuous mode also. */
+-              be_cmd_mcast_mac_set(&adapter->ctrl,
+-                      adapter->if_handle, &mac_addr[0][0], i, false);
+-      }
+-}
+-
+-static void be_set_multicast_list(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      if (netdev->flags & IFF_PROMISC) {
+-              be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 1);
+-      } else {
+-              be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 0);
+-              be_set_multicast_filter(netdev);
+-      }
+-}
+-
+-static void be_rx_rate_update(struct be_adapter *adapter, u32 pktsize,
+-                      u16 numfrags)
+-{
+-      struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+-      u32 rate;
+-
+-      stats->be_rx_compl++;
+-      stats->be_rx_frags += numfrags;
+-      stats->be_rx_bytes += pktsize;
+-
+-      /* Update the rate once in two seconds */
+-      if ((jiffies - stats->be_rx_jiffies) < 2 * HZ)
+-              return;
+-
+-      rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) /
+-              ((u32) (jiffies - stats->be_rx_jiffies) / HZ);
+-      rate = (rate / 1000000);        /* MB/Sec */
+-      stats->be_rx_rate = (rate * 8);         /* Mega Bits/Sec */
+-      stats->be_rx_jiffies = jiffies;
+-      stats->be_rx_bytes_prev = stats->be_rx_bytes;
+-}
+-
+-static struct be_rx_page_info *
+-get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
+-{
+-      struct be_rx_page_info *rx_page_info;
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-
+-      rx_page_info = &adapter->rx_obj.page_info_tbl[frag_idx];
+-      BUG_ON(!rx_page_info->page);
+-
+-      if (rx_page_info->last_page_user)
+-              pci_unmap_page(adapter->pdev, pci_unmap_addr(rx_page_info, bus),
+-                      adapter->big_page_size, PCI_DMA_FROMDEVICE);
+-
+-      atomic_dec(&rxq->used);
+-      return rx_page_info;
+-}
+-
+-/* Throwaway the data in the Rx completion */
+-static void be_rx_compl_discard(struct be_adapter *adapter,
+-                      struct be_eth_rx_compl *rxcp)
+-{
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-      struct be_rx_page_info *page_info;
+-      u16 rxq_idx, i, num_rcvd;
+-
+-      rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+-      num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+-
+-      for (i = 0; i < num_rcvd; i++) {
+-              page_info = get_rx_page_info(adapter, rxq_idx);
+-              put_page(page_info->page);
+-              memset(page_info, 0, sizeof(*page_info));
+-              index_inc(&rxq_idx, rxq->len);
+-      }
+-}
+-
+-/*
+- * skb_fill_rx_data forms a complete skb for an ether frame
+- * indicated by rxcp.
+- */
+-static void skb_fill_rx_data(struct be_adapter *adapter,
+-                      struct sk_buff *skb, struct be_eth_rx_compl *rxcp)
+-{
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-      struct be_rx_page_info *page_info;
+-      u16 rxq_idx, i, num_rcvd;
+-      u32 pktsize, hdr_len, curr_frag_len;
+-      u8 *start;
+-
+-      rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+-      pktsize = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+-      num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+-
+-      page_info = get_rx_page_info(adapter, rxq_idx);
+-
+-      start = page_address(page_info->page) + page_info->page_offset;
+-      prefetch(start);
+-
+-      /* Copy data in the first descriptor of this completion */
+-      curr_frag_len = min(pktsize, rx_frag_size);
+-
+-      /* Copy the header portion into skb_data */
+-      hdr_len = min((u32)BE_HDR_LEN, curr_frag_len);
+-      memcpy(skb->data, start, hdr_len);
+-      skb->len = curr_frag_len;
+-      if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */
+-              /* Complete packet has now been moved to data */
+-              put_page(page_info->page);
+-              skb->data_len = 0;
+-              skb->tail += curr_frag_len;
+-      } else {
+-              skb_shinfo(skb)->nr_frags = 1;
+-              skb_shinfo(skb)->frags[0].page = page_info->page;
+-              skb_shinfo(skb)->frags[0].page_offset =
+-                                      page_info->page_offset + hdr_len;
+-              skb_shinfo(skb)->frags[0].size = curr_frag_len - hdr_len;
+-              skb->data_len = curr_frag_len - hdr_len;
+-              skb->tail += hdr_len;
+-      }
+-      memset(page_info, 0, sizeof(*page_info));
+-
+-      if (pktsize <= rx_frag_size) {
+-              BUG_ON(num_rcvd != 1);
+-              return;
+-      }
+-
+-      /* More frags present for this completion */
+-      pktsize -= curr_frag_len; /* account for above copied frag */
+-      for (i = 1; i < num_rcvd; i++) {
+-              index_inc(&rxq_idx, rxq->len);
+-              page_info = get_rx_page_info(adapter, rxq_idx);
+-
+-              curr_frag_len = min(pktsize, rx_frag_size);
+-
+-              skb_shinfo(skb)->frags[i].page = page_info->page;
+-              skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
+-              skb_shinfo(skb)->frags[i].size = curr_frag_len;
+-              skb->len += curr_frag_len;
+-              skb->data_len += curr_frag_len;
+-              skb_shinfo(skb)->nr_frags++;
+-              pktsize -= curr_frag_len;
+-
+-              memset(page_info, 0, sizeof(*page_info));
+-      }
+-
+-      be_rx_rate_update(adapter, pktsize, num_rcvd);
+-      return;
+-}
+-
+-/* Process the RX completion indicated by rxcp when LRO is disabled */
+-static void be_rx_compl_process(struct be_adapter *adapter,
+-                      struct be_eth_rx_compl *rxcp)
+-{
+-      struct sk_buff *skb;
+-      u32 vtp, vid;
+-      int l4_cksm;
+-
+-      l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
+-      vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+-
+-      skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
+-      if (!skb) {
+-              if (net_ratelimit())
+-                      dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
+-              be_rx_compl_discard(adapter, rxcp);
+-              return;
+-      }
+-
+-      skb_reserve(skb, NET_IP_ALIGN);
+-
+-      skb_fill_rx_data(adapter, skb, rxcp);
+-
+-      if (l4_cksm && adapter->rx_csum)
+-              skb->ip_summed = CHECKSUM_UNNECESSARY;
+-      else
+-              skb->ip_summed = CHECKSUM_NONE;
+-
+-      skb->truesize = skb->len + sizeof(struct sk_buff);
+-      skb->protocol = eth_type_trans(skb, adapter->netdev);
+-      skb->dev = adapter->netdev;
+-
+-      if (vtp) {
+-              if (!adapter->vlan_grp || adapter->num_vlans == 0) {
+-                      kfree_skb(skb);
+-                      return;
+-              }
+-              vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+-              vid = be16_to_cpu(vid);
+-              vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
+-      } else {
+-              netif_receive_skb(skb);
+-      }
+-
+-      adapter->netdev->last_rx = jiffies;
+-
+-      return;
+-}
+-
+-/* Process the RX completion indicated by rxcp when LRO is enabled */
+-static void be_rx_compl_process_lro(struct be_adapter *adapter,
+-                      struct be_eth_rx_compl *rxcp)
+-{
+-      struct be_rx_page_info *page_info;
+-      struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-      u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
+-      u16 i, rxq_idx = 0, vid;
+-
+-      num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+-      pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+-      vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+-      rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+-
+-      remaining = pkt_size;
+-      for (i = 0; i < num_rcvd; i++) {
+-              page_info = get_rx_page_info(adapter, rxq_idx);
+-
+-              curr_frag_len = min(remaining, rx_frag_size);
+-
+-              rx_frags[i].page = page_info->page;
+-              rx_frags[i].page_offset = page_info->page_offset;
+-              rx_frags[i].size = curr_frag_len;
+-              remaining -= curr_frag_len;
+-
+-              index_inc(&rxq_idx, rxq->len);
+-
+-              memset(page_info, 0, sizeof(*page_info));
+-      }
+-
+-      if (likely(!vlanf)) {
+-              lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
+-                              pkt_size, NULL, 0);
+-      } else {
+-              vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+-              vid = be16_to_cpu(vid);
+-
+-              if (!adapter->vlan_grp || adapter->num_vlans == 0)
+-                      return;
+-
+-              lro_vlan_hwaccel_receive_frags(&adapter->rx_obj.lro_mgr,
+-                      rx_frags, pkt_size, pkt_size, adapter->vlan_grp,
+-                      vid, NULL, 0);
+-      }
+-
+-      be_rx_rate_update(adapter, pkt_size, num_rcvd);
+-      return;
+-}
+-
+-static struct be_eth_rx_compl *be_rx_compl_get(struct be_adapter *adapter)
+-{
+-      struct be_eth_rx_compl *rxcp = queue_tail_node(&adapter->rx_obj.cq);
+-
+-      if (rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] == 0)
+-              return NULL;
+-
+-      be_dws_le_to_cpu(rxcp, sizeof(*rxcp));
+-
+-      rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
+-
+-      queue_tail_inc(&adapter->rx_obj.cq);
+-      return rxcp;
+-}
+-
+-static inline struct page *be_alloc_pages(u32 size)
+-{
+-      gfp_t alloc_flags = GFP_ATOMIC;
+-      u32 order = get_order(size);
+-      if (order > 0)
+-              alloc_flags |= __GFP_COMP;
+-      return  alloc_pages(alloc_flags, order);
+-}
+-
+-/*
+- * Allocate a page, split it to fragments of size rx_frag_size and post as
+- * receive buffers to BE
+- */
+-static void be_post_rx_frags(struct be_adapter *adapter)
+-{
+-      struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
+-      struct be_rx_page_info *page_info = NULL;
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-      struct page *pagep = NULL;
+-      struct be_eth_rx_d *rxd;
+-      u64 page_dmaaddr = 0, frag_dmaaddr;
+-      u32 posted, page_offset = 0;
+-
+-
+-      page_info = &page_info_tbl[rxq->head];
+-      for (posted = 0; posted < MAX_RX_POST && !page_info->page; posted++) {
+-              if (!pagep) {
+-                      pagep = be_alloc_pages(adapter->big_page_size);
+-                      if (unlikely(!pagep)) {
+-                              drvr_stats(adapter)->be_ethrx_post_fail++;
+-                              break;
+-                      }
+-                      page_dmaaddr = pci_map_page(adapter->pdev, pagep, 0,
+-                                              adapter->big_page_size,
+-                                              PCI_DMA_FROMDEVICE);
+-                      page_info->page_offset = 0;
+-              } else {
+-                      get_page(pagep);
+-                      page_info->page_offset = page_offset + rx_frag_size;
+-              }
+-              page_offset = page_info->page_offset;
+-              page_info->page = pagep;
+-              pci_unmap_addr_set(page_info, bus, page_dmaaddr);
+-              frag_dmaaddr = page_dmaaddr + page_info->page_offset;
+-
+-              rxd = queue_head_node(rxq);
+-              rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
+-              rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
+-              queue_head_inc(rxq);
+-
+-              /* Any space left in the current big page for another frag? */
+-              if ((page_offset + rx_frag_size + rx_frag_size) >
+-                                      adapter->big_page_size) {
+-                      pagep = NULL;
+-                      page_info->last_page_user = true;
+-              }
+-              page_info = &page_info_tbl[rxq->head];
+-      }
+-      if (pagep)
+-              page_info->last_page_user = true;
+-
+-      if (posted) {
+-              atomic_add(posted, &rxq->used);
+-              be_rxq_notify(&adapter->ctrl, rxq->id, posted);
+-      } else if (atomic_read(&rxq->used) == 0) {
+-              /* Let be_worker replenish when memory is available */
+-              adapter->rx_post_starved = true;
+-      }
+-
+-      return;
+-}
+-
+-static struct be_eth_tx_compl *
+-be_tx_compl_get(struct be_adapter *adapter)
+-{
+-      struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
+-      struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
+-
+-      if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
+-              return NULL;
+-
+-      be_dws_le_to_cpu(txcp, sizeof(*txcp));
+-
+-      txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
+-
+-      queue_tail_inc(tx_cq);
+-      return txcp;
+-}
+-
+-static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
+-{
+-      struct be_queue_info *txq = &adapter->tx_obj.q;
+-      struct be_eth_wrb *wrb;
+-      struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+-      struct sk_buff *sent_skb;
+-      u64 busaddr;
+-      u16 cur_index, num_wrbs = 0;
+-
+-      cur_index = txq->tail;
+-      sent_skb = sent_skbs[cur_index];
+-      BUG_ON(!sent_skb);
+-      sent_skbs[cur_index] = NULL;
+-
+-      do {
+-              cur_index = txq->tail;
+-              wrb = queue_tail_node(txq);
+-              be_dws_le_to_cpu(wrb, sizeof(*wrb));
+-              busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
+-              if (busaddr != 0) {
+-                      pci_unmap_single(adapter->pdev, busaddr,
+-                              wrb->frag_len, PCI_DMA_TODEVICE);
+-              }
+-              num_wrbs++;
+-              queue_tail_inc(txq);
+-      } while (cur_index != last_index);
+-
+-      atomic_sub(num_wrbs, &txq->used);
+-
+-      kfree_skb(sent_skb);
+-}
+-
+-static void be_rx_q_clean(struct be_adapter *adapter)
+-{
+-      struct be_rx_page_info *page_info;
+-      struct be_queue_info *rxq = &adapter->rx_obj.q;
+-      struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+-      struct be_eth_rx_compl *rxcp;
+-      u16 tail;
+-
+-      /* First cleanup pending rx completions */
+-      while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
+-              be_rx_compl_discard(adapter, rxcp);
+-              be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
+-      }
+-
+-      /* Then free posted rx buffer that were not used */
+-      tail = (rxq->head + rxq->len - atomic_read(&rxq->used)) % rxq->len;
+-      for (; tail != rxq->head; index_inc(&tail, rxq->len)) {
+-              page_info = get_rx_page_info(adapter, tail);
+-              put_page(page_info->page);
+-              memset(page_info, 0, sizeof(*page_info));
+-      }
+-      BUG_ON(atomic_read(&rxq->used));
+-}
+-
+-static void be_tx_q_clean(struct be_adapter *adapter)
+-{
+-      struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+-      struct sk_buff *sent_skb;
+-      struct be_queue_info *txq = &adapter->tx_obj.q;
+-      u16 last_index;
+-      bool dummy_wrb;
+-
+-      while (atomic_read(&txq->used)) {
+-              sent_skb = sent_skbs[txq->tail];
+-              last_index = txq->tail;
+-              index_adv(&last_index,
+-                      wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
+-              be_tx_compl_process(adapter, last_index);
+-      }
+-}
+-
+-static void be_tx_queues_destroy(struct be_adapter *adapter)
+-{
+-      struct be_queue_info *q;
+-
+-      q = &adapter->tx_obj.q;
+-      if (q->created)
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
+-      be_queue_free(adapter, q);
+-
+-      q = &adapter->tx_obj.cq;
+-      if (q->created)
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+-      be_queue_free(adapter, q);
+-
+-      /* No more tx completions can be rcvd now; clean up if there are
+-       * any pending completions or pending tx requests */
+-      be_tx_q_clean(adapter);
+-
+-      q = &adapter->tx_eq.q;
+-      if (q->created)
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+-      be_queue_free(adapter, q);
+-}
+-
+-static int be_tx_queues_create(struct be_adapter *adapter)
+-{
+-      struct be_queue_info *eq, *q, *cq;
+-
+-      adapter->tx_eq.max_eqd = 0;
+-      adapter->tx_eq.min_eqd = 0;
+-      adapter->tx_eq.cur_eqd = 96;
+-      adapter->tx_eq.enable_aic = false;
+-      /* Alloc Tx Event queue */
+-      eq = &adapter->tx_eq.q;
+-      if (be_queue_alloc(adapter, eq, EVNT_Q_LEN, sizeof(struct be_eq_entry)))
+-              return -1;
+-
+-      /* Ask BE to create Tx Event queue */
+-      if (be_cmd_eq_create(&adapter->ctrl, eq, adapter->tx_eq.cur_eqd))
+-              goto tx_eq_free;
+-      /* Alloc TX eth compl queue */
+-      cq = &adapter->tx_obj.cq;
+-      if (be_queue_alloc(adapter, cq, TX_CQ_LEN,
+-                      sizeof(struct be_eth_tx_compl)))
+-              goto tx_eq_destroy;
+-
+-      /* Ask BE to create Tx eth compl queue */
+-      if (be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3))
+-              goto tx_cq_free;
+-
+-      /* Alloc TX eth queue */
+-      q = &adapter->tx_obj.q;
+-      if (be_queue_alloc(adapter, q, TX_Q_LEN, sizeof(struct be_eth_wrb)))
+-              goto tx_cq_destroy;
+-
+-      /* Ask BE to create Tx eth queue */
+-      if (be_cmd_txq_create(&adapter->ctrl, q, cq))
+-              goto tx_q_free;
+-      return 0;
+-
+-tx_q_free:
+-      be_queue_free(adapter, q);
+-tx_cq_destroy:
+-      be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+-tx_cq_free:
+-      be_queue_free(adapter, cq);
+-tx_eq_destroy:
+-      be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+-tx_eq_free:
+-      be_queue_free(adapter, eq);
+-      return -1;
+-}
+-
+-static void be_rx_queues_destroy(struct be_adapter *adapter)
+-{
+-      struct be_queue_info *q;
+-
+-      q = &adapter->rx_obj.q;
+-      if (q->created) {
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_RXQ);
+-              be_rx_q_clean(adapter);
+-      }
+-      be_queue_free(adapter, q);
+-
+-      q = &adapter->rx_obj.cq;
+-      if (q->created)
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+-      be_queue_free(adapter, q);
+-
+-      q = &adapter->rx_eq.q;
+-      if (q->created)
+-              be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+-      be_queue_free(adapter, q);
+-}
+-
+-static int be_rx_queues_create(struct be_adapter *adapter)
+-{
+-      struct be_queue_info *eq, *q, *cq;
+-      int rc;
+-
+-      adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
+-      adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
+-      adapter->rx_eq.max_eqd = BE_MAX_EQD;
+-      adapter->rx_eq.min_eqd = 0;
+-      adapter->rx_eq.cur_eqd = 0;
+-      adapter->rx_eq.enable_aic = true;
+-
+-      /* Alloc Rx Event queue */
+-      eq = &adapter->rx_eq.q;
+-      rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN,
+-                              sizeof(struct be_eq_entry));
+-      if (rc)
+-              return rc;
+-
+-      /* Ask BE to create Rx Event queue */
+-      rc = be_cmd_eq_create(&adapter->ctrl, eq, adapter->rx_eq.cur_eqd);
+-      if (rc)
+-              goto rx_eq_free;
+-
+-      /* Alloc RX eth compl queue */
+-      cq = &adapter->rx_obj.cq;
+-      rc = be_queue_alloc(adapter, cq, RX_CQ_LEN,
+-                      sizeof(struct be_eth_rx_compl));
+-      if (rc)
+-              goto rx_eq_destroy;
+-
+-      /* Ask BE to create Rx eth compl queue */
+-      rc = be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3);
+-      if (rc)
+-              goto rx_cq_free;
+-
+-      /* Alloc RX eth queue */
+-      q = &adapter->rx_obj.q;
+-      rc = be_queue_alloc(adapter, q, RX_Q_LEN, sizeof(struct be_eth_rx_d));
+-      if (rc)
+-              goto rx_cq_destroy;
+-
+-      /* Ask BE to create Rx eth queue */
+-      rc = be_cmd_rxq_create(&adapter->ctrl, q, cq->id, rx_frag_size,
+-              BE_MAX_JUMBO_FRAME_SIZE, adapter->if_handle, false);
+-      if (rc)
+-              goto rx_q_free;
+-
+-      return 0;
+-rx_q_free:
+-      be_queue_free(adapter, q);
+-rx_cq_destroy:
+-      be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+-rx_cq_free:
+-      be_queue_free(adapter, cq);
+-rx_eq_destroy:
+-      be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+-rx_eq_free:
+-      be_queue_free(adapter, eq);
+-      return rc;
+-}
+-static bool event_get(struct be_eq_obj *eq_obj, u16 *rid)
+-{
+-      struct be_eq_entry *entry = queue_tail_node(&eq_obj->q);
+-      u32 evt = entry->evt;
+-
+-      if (!evt)
+-              return false;
+-
+-      evt = le32_to_cpu(evt);
+-      *rid = (evt >> EQ_ENTRY_RES_ID_SHIFT) & EQ_ENTRY_RES_ID_MASK;
+-      entry->evt = 0;
+-      queue_tail_inc(&eq_obj->q);
+-      return true;
+-}
+-
+-static int event_handle(struct be_ctrl_info *ctrl,
+-                      struct be_eq_obj *eq_obj)
+-{
+-      u16 rid = 0, num = 0;
+-
+-      while (event_get(eq_obj, &rid))
+-              num++;
+-
+-      /* We can see an interrupt and no event */
+-      be_eq_notify(ctrl, eq_obj->q.id, true, true, num);
+-      if (num)
+-              napi_schedule(&eq_obj->napi);
+-
+-      return num;
+-}
+-
+-static irqreturn_t be_intx(int irq, void *dev)
+-{
+-      struct be_adapter *adapter = dev;
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      int rx, tx;
+-
+-      tx = event_handle(ctrl, &adapter->tx_eq);
+-      rx = event_handle(ctrl, &adapter->rx_eq);
+-
+-      if (rx || tx)
+-              return IRQ_HANDLED;
+-      else
+-              return IRQ_NONE;
+-}
+-
+-static irqreturn_t be_msix_rx(int irq, void *dev)
+-{
+-      struct be_adapter *adapter = dev;
+-
+-      event_handle(&adapter->ctrl, &adapter->rx_eq);
+-
+-      return IRQ_HANDLED;
+-}
+-
+-static irqreturn_t be_msix_tx(int irq, void *dev)
+-{
+-      struct be_adapter *adapter = dev;
+-
+-      event_handle(&adapter->ctrl, &adapter->tx_eq);
+-
+-      return IRQ_HANDLED;
+-}
+-
+-static inline bool do_lro(struct be_adapter *adapter,
+-                      struct be_eth_rx_compl *rxcp)
+-{
+-      int err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
+-      int tcp_frame = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+-
+-      if (err)
+-              drvr_stats(adapter)->be_rxcp_err++;
+-
+-      return (!tcp_frame || err || (adapter->max_rx_coal <= 1)) ?
+-              false : true;
+-}
+-
+-int be_poll_rx(struct napi_struct *napi, int budget)
+-{
+-      struct be_eq_obj *rx_eq = container_of(napi, struct be_eq_obj, napi);
+-      struct be_adapter *adapter =
+-              container_of(rx_eq, struct be_adapter, rx_eq);
+-      struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+-      struct be_eth_rx_compl *rxcp;
+-      u32 work_done;
+-
+-      for (work_done = 0; work_done < budget; work_done++) {
+-              rxcp = be_rx_compl_get(adapter);
+-              if (!rxcp)
+-                      break;
+-
+-              if (do_lro(adapter, rxcp))
+-                      be_rx_compl_process_lro(adapter, rxcp);
+-              else
+-                      be_rx_compl_process(adapter, rxcp);
+-      }
+-
+-      lro_flush_all(&adapter->rx_obj.lro_mgr);
+-
+-      /* Refill the queue */
+-      if (atomic_read(&adapter->rx_obj.q.used) < RX_FRAGS_REFILL_WM)
+-              be_post_rx_frags(adapter);
+-
+-      /* All consumed */
+-      if (work_done < budget) {
+-              napi_complete(napi);
+-              be_cq_notify(&adapter->ctrl, rx_cq->id, true, work_done);
+-      } else {
+-              /* More to be consumed; continue with interrupts disabled */
+-              be_cq_notify(&adapter->ctrl, rx_cq->id, false, work_done);
+-      }
+-      return work_done;
+-}
+-
+-/* For TX we don't honour budget; consume everything */
+-int be_poll_tx(struct napi_struct *napi, int budget)
+-{
+-      struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+-      struct be_adapter *adapter =
+-              container_of(tx_eq, struct be_adapter, tx_eq);
+-      struct be_tx_obj *tx_obj = &adapter->tx_obj;
+-      struct be_queue_info *tx_cq = &tx_obj->cq;
+-      struct be_queue_info *txq = &tx_obj->q;
+-      struct be_eth_tx_compl *txcp;
+-      u32 num_cmpl = 0;
+-      u16 end_idx;
+-
+-      while ((txcp = be_tx_compl_get(adapter))) {
+-              end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
+-                                      wrb_index, txcp);
+-              be_tx_compl_process(adapter, end_idx);
+-              num_cmpl++;
+-      }
+-
+-      /* As Tx wrbs have been freed up, wake up netdev queue if
+-       * it was stopped due to lack of tx wrbs.
+-       */
+-      if (netif_queue_stopped(adapter->netdev) &&
+-                      atomic_read(&txq->used) < txq->len / 2) {
+-              netif_wake_queue(adapter->netdev);
+-      }
+-
+-      napi_complete(napi);
+-
+-      be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+-
+-      drvr_stats(adapter)->be_tx_events++;
+-      drvr_stats(adapter)->be_tx_compl += num_cmpl;
+-
+-      return 1;
+-}
+-
+-static void be_worker(struct work_struct *work)
+-{
+-      struct be_adapter *adapter =
+-              container_of(work, struct be_adapter, work.work);
+-      int status;
+-
+-      /* Check link */
+-      be_link_status_update(adapter);
+-
+-      /* Get Stats */
+-      status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
+-      if (!status)
+-              netdev_stats_update(adapter);
+-
+-      /* Set EQ delay */
+-      be_rx_eqd_update(adapter);
+-
+-      if (adapter->rx_post_starved) {
+-              adapter->rx_post_starved = false;
+-              be_post_rx_frags(adapter);
+-      }
+-
+-      schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
+-}
+-
+-static void be_msix_enable(struct be_adapter *adapter)
+-{
+-      int i, status;
+-
+-      for (i = 0; i < BE_NUM_MSIX_VECTORS; i++)
+-              adapter->msix_entries[i].entry = i;
+-
+-      status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+-              BE_NUM_MSIX_VECTORS);
+-      if (status == 0)
+-              adapter->msix_enabled = true;
+-      return;
+-}
+-
+-static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id)
+-{
+-      return adapter->msix_entries[eq_id -
+-                      8 * adapter->ctrl.pci_func].vector;
+-}
+-
+-static int be_msix_register(struct be_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      int status, vec;
+-
+-      sprintf(tx_eq->desc, "%s-tx", netdev->name);
+-      vec = be_msix_vec_get(adapter, tx_eq->q.id);
+-      status = request_irq(vec, be_msix_tx, 0, tx_eq->desc, adapter);
+-      if (status)
+-              goto err;
+-
+-      sprintf(rx_eq->desc, "%s-rx", netdev->name);
+-      vec = be_msix_vec_get(adapter, rx_eq->q.id);
+-      status = request_irq(vec, be_msix_rx, 0, rx_eq->desc, adapter);
+-      if (status) { /* Free TX IRQ */
+-              vec = be_msix_vec_get(adapter, tx_eq->q.id);
+-              free_irq(vec, adapter);
+-              goto err;
+-      }
+-      return 0;
+-err:
+-      dev_warn(&adapter->pdev->dev,
+-              "MSIX Request IRQ failed - err %d\n", status);
+-      pci_disable_msix(adapter->pdev);
+-      adapter->msix_enabled = false;
+-      return status;
+-}
+-
+-static int be_irq_register(struct be_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-      int status;
+-
+-      if (adapter->msix_enabled) {
+-              status = be_msix_register(adapter);
+-              if (status == 0)
+-                      goto done;
+-      }
+-
+-      /* INTx */
+-      netdev->irq = adapter->pdev->irq;
+-      status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name,
+-                      adapter);
+-      if (status) {
+-              dev_err(&adapter->pdev->dev,
+-                      "INTx request IRQ failed - err %d\n", status);
+-              return status;
+-      }
+-done:
+-      adapter->isr_registered = true;
+-      return 0;
+-}
+-
+-static void be_irq_unregister(struct be_adapter *adapter)
+-{
+-      struct net_device *netdev = adapter->netdev;
+-      int vec;
+-
+-      if (!adapter->isr_registered)
+-              return;
+-
+-      /* INTx */
+-      if (!adapter->msix_enabled) {
+-              free_irq(netdev->irq, adapter);
+-              goto done;
+-      }
+-
+-      /* MSIx */
+-      vec = be_msix_vec_get(adapter, adapter->tx_eq.q.id);
+-      free_irq(vec, adapter);
+-      vec = be_msix_vec_get(adapter, adapter->rx_eq.q.id);
+-      free_irq(vec, adapter);
+-done:
+-      adapter->isr_registered = false;
+-      return;
+-}
+-
+-static int be_open(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-      u32 if_flags;
+-      int status;
+-
+-      if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
+-              BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
+-              BE_IF_FLAGS_PASS_L3L4_ERRORS;
+-      status = be_cmd_if_create(ctrl, if_flags, netdev->dev_addr,
+-                      false/* pmac_invalid */, &adapter->if_handle,
+-                      &adapter->pmac_id);
+-      if (status != 0)
+-              goto do_none;
+-
+-      be_vid_config(netdev);
+-
+-      status = be_cmd_set_flow_control(ctrl, true, true);
+-      if (status != 0)
+-              goto if_destroy;
+-
+-      status = be_tx_queues_create(adapter);
+-      if (status != 0)
+-              goto if_destroy;
+-
+-      status = be_rx_queues_create(adapter);
+-      if (status != 0)
+-              goto tx_qs_destroy;
+-
+-      /* First time posting */
+-      be_post_rx_frags(adapter);
+-
+-      napi_enable(&rx_eq->napi);
+-      napi_enable(&tx_eq->napi);
+-
+-      be_irq_register(adapter);
+-
+-      be_intr_set(ctrl, true);
+-
+-      /* The evt queues are created in the unarmed state; arm them */
+-      be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+-      be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+-
+-      /* The compl queues are created in the unarmed state; arm them */
+-      be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+-      be_cq_notify(ctrl, adapter->tx_obj.cq.id, true, 0);
+-
+-      be_link_status_update(adapter);
+-
+-      schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
+-      return 0;
+-
+-tx_qs_destroy:
+-      be_tx_queues_destroy(adapter);
+-if_destroy:
+-      be_cmd_if_destroy(ctrl, adapter->if_handle);
+-do_none:
+-      return status;
+-}
+-
+-static int be_close(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      struct be_eq_obj *rx_eq = &adapter->rx_eq;
+-      struct be_eq_obj *tx_eq = &adapter->tx_eq;
+-      int vec;
+-
+-      cancel_delayed_work(&adapter->work);
+-
+-      netif_stop_queue(netdev);
+-      netif_carrier_off(netdev);
+-      adapter->link.speed = PHY_LINK_SPEED_ZERO;
+-
+-      be_intr_set(ctrl, false);
+-
+-      if (adapter->msix_enabled) {
+-              vec = be_msix_vec_get(adapter, tx_eq->q.id);
+-              synchronize_irq(vec);
+-              vec = be_msix_vec_get(adapter, rx_eq->q.id);
+-              synchronize_irq(vec);
+-      } else {
+-              synchronize_irq(netdev->irq);
+-      }
+-      be_irq_unregister(adapter);
+-
+-      napi_disable(&rx_eq->napi);
+-      napi_disable(&tx_eq->napi);
+-
+-      be_rx_queues_destroy(adapter);
+-      be_tx_queues_destroy(adapter);
+-
+-      be_cmd_if_destroy(ctrl, adapter->if_handle);
+-      return 0;
+-}
+-
+-static int be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
+-                              void **ip_hdr, void **tcpudp_hdr,
+-                              u64 *hdr_flags, void *priv)
+-{
+-      struct ethhdr *eh;
+-      struct vlan_ethhdr *veh;
+-      struct iphdr *iph;
+-      u8 *va = page_address(frag->page) + frag->page_offset;
+-      unsigned long ll_hlen;
+-
+-      prefetch(va);
+-      eh = (struct ethhdr *)va;
+-      *mac_hdr = eh;
+-      ll_hlen = ETH_HLEN;
+-      if (eh->h_proto != htons(ETH_P_IP)) {
+-              if (eh->h_proto == htons(ETH_P_8021Q)) {
+-                      veh = (struct vlan_ethhdr *)va;
+-                      if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
+-                              return -1;
+-
+-                      ll_hlen += VLAN_HLEN;
+-              } else {
+-                      return -1;
+-              }
+-      }
+-      *hdr_flags = LRO_IPV4;
+-      iph = (struct iphdr *)(va + ll_hlen);
+-      *ip_hdr = iph;
+-      if (iph->protocol != IPPROTO_TCP)
+-              return -1;
+-      *hdr_flags |= LRO_TCP;
+-      *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
+-
+-      return 0;
+-}
+-
+-static void be_lro_init(struct be_adapter *adapter, struct net_device *netdev)
+-{
+-      struct net_lro_mgr *lro_mgr;
+-
+-      lro_mgr = &adapter->rx_obj.lro_mgr;
+-      lro_mgr->dev = netdev;
+-      lro_mgr->features = LRO_F_NAPI;
+-      lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
+-      lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+-      lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
+-      lro_mgr->lro_arr = adapter->rx_obj.lro_desc;
+-      lro_mgr->get_frag_header = be_get_frag_header;
+-      lro_mgr->max_aggr = BE_MAX_FRAGS_PER_FRAME;
+-}
+-
+-static struct net_device_ops be_netdev_ops = {
+-      .ndo_open               = be_open,
+-      .ndo_stop               = be_close,
+-      .ndo_start_xmit         = be_xmit,
+-      .ndo_get_stats          = be_get_stats,
+-      .ndo_set_rx_mode        = be_set_multicast_list,
+-      .ndo_set_mac_address    = be_mac_addr_set,
+-      .ndo_change_mtu         = be_change_mtu,
+-      .ndo_validate_addr      = eth_validate_addr,
+-      .ndo_vlan_rx_register   = be_vlan_register,
+-      .ndo_vlan_rx_add_vid    = be_vlan_add_vid,
+-      .ndo_vlan_rx_kill_vid   = be_vlan_rem_vid,
+-};
+-
+-static void be_netdev_init(struct net_device *netdev)
+-{
+-      struct be_adapter *adapter = netdev_priv(netdev);
+-
+-      netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
+-              NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
+-              NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+-
+-      netdev->flags |= IFF_MULTICAST;
+-
+-      BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
+-
+-      SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
+-
+-      be_lro_init(adapter, netdev);
+-
+-      netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
+-              BE_NAPI_WEIGHT);
+-      netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx,
+-              BE_NAPI_WEIGHT);
+-
+-      netif_carrier_off(netdev);
+-      netif_stop_queue(netdev);
+-}
+-
+-static void be_unmap_pci_bars(struct be_adapter *adapter)
+-{
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      if (ctrl->csr)
+-              iounmap(ctrl->csr);
+-      if (ctrl->db)
+-              iounmap(ctrl->db);
+-      if (ctrl->pcicfg)
+-              iounmap(ctrl->pcicfg);
+-}
+-
+-static int be_map_pci_bars(struct be_adapter *adapter)
+-{
+-      u8 __iomem *addr;
+-
+-      addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
+-                      pci_resource_len(adapter->pdev, 2));
+-      if (addr == NULL)
+-              return -ENOMEM;
+-      adapter->ctrl.csr = addr;
+-
+-      addr = ioremap_nocache(pci_resource_start(adapter->pdev, 4),
+-                      128 * 1024);
+-      if (addr == NULL)
+-              goto pci_map_err;
+-      adapter->ctrl.db = addr;
+-
+-      addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
+-                      pci_resource_len(adapter->pdev, 1));
+-      if (addr == NULL)
+-              goto pci_map_err;
+-      adapter->ctrl.pcicfg = addr;
+-
+-      return 0;
+-pci_map_err:
+-      be_unmap_pci_bars(adapter);
+-      return -ENOMEM;
+-}
+-
+-
+-static void be_ctrl_cleanup(struct be_adapter *adapter)
+-{
+-      struct be_dma_mem *mem = &adapter->ctrl.mbox_mem_alloced;
+-
+-      be_unmap_pci_bars(adapter);
+-
+-      if (mem->va)
+-              pci_free_consistent(adapter->pdev, mem->size,
+-                      mem->va, mem->dma);
+-}
+-
+-/* Initialize the mbox required to send cmds to BE */
+-static int be_ctrl_init(struct be_adapter *adapter)
+-{
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
+-      struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+-      int status;
+-      u32 val;
+-
+-      status = be_map_pci_bars(adapter);
+-      if (status)
+-              return status;
+-
+-      mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
+-      mbox_mem_alloc->va = pci_alloc_consistent(adapter->pdev,
+-                              mbox_mem_alloc->size, &mbox_mem_alloc->dma);
+-      if (!mbox_mem_alloc->va) {
+-              be_unmap_pci_bars(adapter);
+-              return -1;
+-      }
+-      mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
+-      mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
+-      mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
+-      memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+-      spin_lock_init(&ctrl->cmd_lock);
+-
+-      val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
+-      ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
+-                                      MEMBAR_CTRL_INT_CTRL_PFUNC_MASK;
+-      return 0;
+-}
+-
+-static void be_stats_cleanup(struct be_adapter *adapter)
+-{
+-      struct be_stats_obj *stats = &adapter->stats;
+-      struct be_dma_mem *cmd = &stats->cmd;
+-
+-      if (cmd->va)
+-              pci_free_consistent(adapter->pdev, cmd->size,
+-                      cmd->va, cmd->dma);
+-}
+-
+-static int be_stats_init(struct be_adapter *adapter)
+-{
+-      struct be_stats_obj *stats = &adapter->stats;
+-      struct be_dma_mem *cmd = &stats->cmd;
+-
+-      cmd->size = sizeof(struct be_cmd_req_get_stats);
+-      cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
+-      if (cmd->va == NULL)
+-              return -1;
+-      return 0;
+-}
+-
+-static void __devexit be_remove(struct pci_dev *pdev)
+-{
+-      struct be_adapter *adapter = pci_get_drvdata(pdev);
+-      if (!adapter)
+-              return;
+-
+-      unregister_netdev(adapter->netdev);
+-
+-      be_stats_cleanup(adapter);
+-
+-      be_ctrl_cleanup(adapter);
+-
+-      if (adapter->msix_enabled) {
+-              pci_disable_msix(adapter->pdev);
+-              adapter->msix_enabled = false;
+-      }
+-
+-      pci_set_drvdata(pdev, NULL);
+-      pci_release_regions(pdev);
+-      pci_disable_device(pdev);
+-
+-      free_netdev(adapter->netdev);
+-}
+-
+-static int be_hw_up(struct be_adapter *adapter)
+-{
+-      struct be_ctrl_info *ctrl = &adapter->ctrl;
+-      int status;
+-
+-      status = be_cmd_POST(ctrl);
+-      if (status)
+-              return status;
+-
+-      status = be_cmd_get_fw_ver(ctrl, adapter->fw_ver);
+-      if (status)
+-              return status;
+-
+-      status = be_cmd_query_fw_cfg(ctrl, &adapter->port_num);
+-      return status;
+-}
+-
+-static int __devinit be_probe(struct pci_dev *pdev,
+-                      const struct pci_device_id *pdev_id)
+-{
+-      int status = 0;
+-      struct be_adapter *adapter;
+-      struct net_device *netdev;
+-      struct be_ctrl_info *ctrl;
+-      u8 mac[ETH_ALEN];
+-
+-      status = pci_enable_device(pdev);
+-      if (status)
+-              goto do_none;
+-
+-      status = pci_request_regions(pdev, DRV_NAME);
+-      if (status)
+-              goto disable_dev;
+-      pci_set_master(pdev);
+-
+-      netdev = alloc_etherdev(sizeof(struct be_adapter));
+-      if (netdev == NULL) {
+-              status = -ENOMEM;
+-              goto rel_reg;
+-      }
+-      adapter = netdev_priv(netdev);
+-      adapter->pdev = pdev;
+-      pci_set_drvdata(pdev, adapter);
+-      adapter->netdev = netdev;
+-
+-      be_msix_enable(adapter);
+-
+-      status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+-      if (!status) {
+-              netdev->features |= NETIF_F_HIGHDMA;
+-      } else {
+-              status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+-              if (status) {
+-                      dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
+-                      goto free_netdev;
+-              }
+-      }
+-
+-      ctrl = &adapter->ctrl;
+-      status = be_ctrl_init(adapter);
+-      if (status)
+-              goto free_netdev;
+-
+-      status = be_stats_init(adapter);
+-      if (status)
+-              goto ctrl_clean;
+-
+-      status = be_hw_up(adapter);
+-      if (status)
+-              goto stats_clean;
+-
+-      status = be_cmd_mac_addr_query(ctrl, mac, MAC_ADDRESS_TYPE_NETWORK,
+-                      true /* permanent */, 0);
+-      if (status)
+-              goto stats_clean;
+-      memcpy(netdev->dev_addr, mac, ETH_ALEN);
+-
+-      INIT_DELAYED_WORK(&adapter->work, be_worker);
+-      be_netdev_init(netdev);
+-      SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
+-
+-      status = register_netdev(netdev);
+-      if (status != 0)
+-              goto stats_clean;
+-
+-      dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+-      return 0;
+-
+-stats_clean:
+-      be_stats_cleanup(adapter);
+-ctrl_clean:
+-      be_ctrl_cleanup(adapter);
+-free_netdev:
+-      free_netdev(adapter->netdev);
+-rel_reg:
+-      pci_release_regions(pdev);
+-disable_dev:
+-      pci_disable_device(pdev);
+-do_none:
+-      dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+-      return status;
+-}
+-
+-static int be_suspend(struct pci_dev *pdev, pm_message_t state)
+-{
+-      struct be_adapter *adapter = pci_get_drvdata(pdev);
+-      struct net_device *netdev =  adapter->netdev;
+-
+-      netif_device_detach(netdev);
+-      if (netif_running(netdev)) {
+-              rtnl_lock();
+-              be_close(netdev);
+-              rtnl_unlock();
+-      }
+-
+-      pci_save_state(pdev);
+-      pci_disable_device(pdev);
+-      pci_set_power_state(pdev, pci_choose_state(pdev, state));
+-      return 0;
+-}
+-
+-static int be_resume(struct pci_dev *pdev)
+-{
+-      int status = 0;
+-      struct be_adapter *adapter = pci_get_drvdata(pdev);
+-      struct net_device *netdev =  adapter->netdev;
+-
+-      netif_device_detach(netdev);
+-
+-      status = pci_enable_device(pdev);
+-      if (status)
+-              return status;
+-
+-      pci_set_power_state(pdev, 0);
+-      pci_restore_state(pdev);
+-
+-      if (netif_running(netdev)) {
+-              rtnl_lock();
+-              be_open(netdev);
+-              rtnl_unlock();
+-      }
+-      netif_device_attach(netdev);
+-      return 0;
+-}
+-
+-static struct pci_driver be_driver = {
+-      .name = DRV_NAME,
+-      .id_table = be_dev_ids,
+-      .probe = be_probe,
+-      .remove = be_remove,
+-      .suspend = be_suspend,
+-      .resume = be_resume
+-};
+-
+-static int __init be_init_module(void)
+-{
+-      if (rx_frag_size != 8192 && rx_frag_size != 4096
+-              && rx_frag_size != 2048) {
+-              printk(KERN_WARNING DRV_NAME
+-                      " : Module param rx_frag_size must be 2048/4096/8192."
+-                      " Using 2048\n");
+-              rx_frag_size = 2048;
+-      }
+-      /* Ensure rx_frag_size is aligned to chache line */
+-      if (SKB_DATA_ALIGN(rx_frag_size) != rx_frag_size) {
+-              printk(KERN_WARNING DRV_NAME
+-                      " : Bad module param rx_frag_size. Using 2048\n");
+-              rx_frag_size = 2048;
+-      }
+-
+-      return pci_register_driver(&be_driver);
+-}
+-module_init(be_init_module);
+-
+-static void __exit be_exit_module(void)
+-{
+-      pci_unregister_driver(&be_driver);
+-}
+-module_exit(be_exit_module);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/Kconfig linux-2.6.29-rc3.owrt/drivers/net/benet/Kconfig
+--- linux-2.6.29.owrt/drivers/net/benet/Kconfig        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/Kconfig    1970-01-01 01:00:00.000000000 +0100
+@@ -1,7 +0,0 @@
+-config BE2NET
+-      tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
+-      depends on PCI && INET
+-      select INET_LRO
+-      help
+-      This driver implements the NIC functionality for ServerEngines'
+-      10Gbps network adapter - BladeEngine 2.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/benet/Makefile linux-2.6.29-rc3.owrt/drivers/net/benet/Makefile
+--- linux-2.6.29.owrt/drivers/net/benet/Makefile       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/benet/Makefile   1970-01-01 01:00:00.000000000 +0100
+@@ -1,7 +0,0 @@
+-#
+-# Makefile to build the network driver for ServerEngine's BladeEngine.
+-#
+-
+-obj-$(CONFIG_BE2NET) += be2net.o
+-
+-be2net-y :=  be_main.o be_cmds.o be_ethtool.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2.c linux-2.6.29-rc3.owrt/drivers/net/bnx2.c
+--- linux-2.6.29.owrt/drivers/net/bnx2.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2.c   2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ /* bnx2.c: Broadcom NX2 network driver.
+  *
+- * Copyright (c) 2004-2009 Broadcom Corporation
++ * Copyright (c) 2004-2008 Broadcom Corporation
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -57,8 +57,8 @@
+ #define DRV_MODULE_NAME               "bnx2"
+ #define PFX DRV_MODULE_NAME   ": "
+-#define DRV_MODULE_VERSION    "1.9.3"
+-#define DRV_MODULE_RELDATE    "March 17, 2009"
++#define DRV_MODULE_VERSION    "1.9.0"
++#define DRV_MODULE_RELDATE    "Dec 16, 2008"
+ #define RUN_AT(x) (jiffies + (x))
+@@ -2910,8 +2910,18 @@
+               rx_hdr = (struct l2_fhdr *) skb->data;
+               len = rx_hdr->l2_fhdr_pkt_len;
+-              status = rx_hdr->l2_fhdr_status;
++              if ((status = rx_hdr->l2_fhdr_status) &
++                      (L2_FHDR_ERRORS_BAD_CRC |
++                      L2_FHDR_ERRORS_PHY_DECODE |
++                      L2_FHDR_ERRORS_ALIGNMENT |
++                      L2_FHDR_ERRORS_TOO_SHORT |
++                      L2_FHDR_ERRORS_GIANT_FRAME)) {
++
++                      bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
++                                        sw_ring_prod);
++                      goto next_rx;
++              }
+               hdr_len = 0;
+               if (status & L2_FHDR_STATUS_SPLIT) {
+                       hdr_len = rx_hdr->l2_fhdr_ip_xsum;
+@@ -2921,24 +2931,6 @@
+                       pg_ring_used = 1;
+               }
+-              if (unlikely(status & (L2_FHDR_ERRORS_BAD_CRC |
+-                                     L2_FHDR_ERRORS_PHY_DECODE |
+-                                     L2_FHDR_ERRORS_ALIGNMENT |
+-                                     L2_FHDR_ERRORS_TOO_SHORT |
+-                                     L2_FHDR_ERRORS_GIANT_FRAME))) {
+-
+-                      bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
+-                                        sw_ring_prod);
+-                      if (pg_ring_used) {
+-                              int pages;
+-
+-                              pages = PAGE_ALIGN(len - hdr_len) >> PAGE_SHIFT;
+-
+-                              bnx2_reuse_rx_skb_pages(bp, rxr, NULL, pages);
+-                      }
+-                      goto next_rx;
+-              }
+-
+               len -= 4;
+               if (len <= bp->rx_copy_thresh) {
+@@ -5843,6 +5835,9 @@
+       for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
+               msix_ent[i].entry = i;
+               msix_ent[i].vector = 0;
++
++              snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
++              bp->irq_tbl[i].handler = bnx2_msi_1shot;
+       }
+       rc = pci_enable_msix(bp->pdev, msix_ent, BNX2_MAX_MSIX_VEC);
+@@ -5851,11 +5846,8 @@
+       bp->irq_nvecs = msix_vecs;
+       bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI;
+-      for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
++      for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
+               bp->irq_tbl[i].vector = msix_ent[i].vector;
+-              snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
+-              bp->irq_tbl[i].handler = bnx2_msi_1shot;
+-      }
+ }
+ static void
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2_fw2.h linux-2.6.29-rc3.owrt/drivers/net/bnx2_fw2.h
+--- linux-2.6.29.owrt/drivers/net/bnx2_fw2.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2_fw2.h       2009-05-10 23:48:28.000000000 +0200
+@@ -15,847 +15,848 @@
+  */
+ static u8 bnx2_COM_b09FwText[] = {
+-      0xcd, 0x7c, 0x7b, 0x6c, 0x5c, 0xd7, 0x99, 0xdf, 0x77, 0xef, 0xcc, 0x90,
+-      0x43, 0x6a, 0x44, 0x5d, 0x32, 0x13, 0x66, 0x1c, 0x33, 0xcd, 0x3c, 0x2e,
+-      0x29, 0xda, 0x64, 0x92, 0x31, 0x77, 0xa4, 0xd0, 0xc9, 0xad, 0x3d, 0x99,
+-      0x19, 0xc9, 0x4c, 0xa8, 0x0d, 0xe8, 0x44, 0x2e, 0x52, 0x54, 0x28, 0xd8,
+-      0x21, 0xe5, 0x28, 0x8b, 0xec, 0xae, 0xf2, 0x28, 0x9a, 0x2e, 0xd2, 0xd5,
+-      0x64, 0x48, 0x29, 0xca, 0x62, 0xc4, 0x19, 0xd3, 0x34, 0x93, 0xa2, 0x01,
+-      0x32, 0x19, 0x92, 0x72, 0x76, 0x31, 0x12, 0x15, 0xdb, 0xcd, 0x1a, 0x41,
+-      0xe2, 0xb0, 0xd4, 0x23, 0xde, 0x20, 0x2d, 0xb4, 0x1b, 0x17, 0x4d, 0xd3,
+-      0x45, 0x21, 0xc8, 0x4e, 0x6c, 0x6c, 0xb3, 0x6d, 0x50, 0x2c, 0x10, 0x77,
+-      0x91, 0x64, 0xfa, 0xfb, 0x9d, 0x73, 0xee, 0x70, 0x44, 0x31, 0x4e, 0xba,
+-      0x7f, 0x95, 0xc0, 0xe0, 0xdc, 0x7b, 0x9e, 0xdf, 0xf9, 0xce, 0xf7, 0x3e,
+-      0xdf, 0xe5, 0x43, 0x22, 0xbd, 0x62, 0xfe, 0xf6, 0xe3, 0x97, 0xf9, 0xfd,
+-      0x3f, 0x9c, 0x7b, 0xe0, 0x9d, 0x87, 0xdf, 0x89, 0xc7, 0x43, 0xf6, 0x81,
+-      0xae, 0x20, 0xeb, 0x03, 0xf8, 0x45, 0xf1, 0x9b, 0x30, 0xcf, 0x7b, 0xfd,
+-      0x39, 0xf8, 0x1d, 0xb6, 0x44, 0x66, 0xff, 0x46, 0xc4, 0xda, 0xd5, 0x16,
+-      0xfe, 0x35, 0x63, 0xde, 0xe8, 0xcf, 0xfe, 0x2d, 0xfb, 0x39, 0xff, 0x80,
+-      0xb9, 0xfd, 0xbf, 0x80, 0x19, 0xbe, 0xdf, 0xfc, 0x24, 0x6c, 0x7b, 0xb7,
+-      0x3e, 0x90, 0x73, 0x25, 0x1c, 0xf0, 0x7e, 0x38, 0x3d, 0xe7, 0x8a, 0x64,
+-      0x9b, 0x63, 0xf1, 0xbc, 0xfc, 0xb2, 0x55, 0x8a, 0x06, 0x85, 0xf5, 0x6f,
+-      0xf3, 0x7e, 0xf1, 0x95, 0x6f, 0xbf, 0x3b, 0xf1, 0xb3, 0x7a, 0x40, 0xc2,
+-      0x8e, 0xf7, 0xba, 0x38, 0x23, 0x12, 0x1e, 0xc2, 0x98, 0x2f, 0x1f, 0x9c,
+-      0xb5, 0xa5, 0xcf, 0x9f, 0xeb, 0xb5, 0xd6, 0xb7, 0x0f, 0x4a, 0xc9, 0xf6,
+-      0x1c, 0xb9, 0xb2, 0x19, 0x95, 0xef, 0x6c, 0x8a, 0x35, 0x93, 0xe9, 0x11,
+-      0x7b, 0xf9, 0xad, 0x92, 0x75, 0x2c, 0x09, 0xb8, 0x5c, 0x27, 0x2e, 0xb9,
+-      0xca, 0x20, 0xde, 0x13, 0x31, 0x91, 0x7f, 0xbe, 0x5f, 0x8f, 0x0d, 0x4b,
+-      0x60, 0x55, 0xc2, 0x5d, 0xde, 0x0b, 0xd3, 0x37, 0x56, 0x62, 0x12, 0x5c,
+-      0x1a, 0x97, 0x72, 0x35, 0x22, 0xa1, 0x55, 0x19, 0x0a, 0xc8, 0x70, 0xec,
+-      0x71, 0xf4, 0x28, 0x34, 0x83, 0x72, 0xa4, 0x69, 0x49, 0xd0, 0x0d, 0x03,
+-      0xb6, 0x08, 0x7e, 0x0e, 0x7e, 0x51, 0xfc, 0x62, 0xf8, 0x9d, 0xc5, 0x3c,
+-      0x43, 0x92, 0x6f, 0x72, 0x4e, 0xac, 0x5b, 0xc5, 0xfa, 0xd5, 0x84, 0x33,
+-      0x8b, 0x79, 0x6f, 0x05, 0x62, 0xf2, 0xed, 0x83, 0x84, 0xcb, 0x21, 0x3c,
+-      0x80, 0x2d, 0x6c, 0xe5, 0x56, 0xe4, 0x74, 0x3e, 0x2d, 0x71, 0xdb, 0xed,
+-      0x95, 0xa2, 0x63, 0xc5, 0xe7, 0x47, 0x07, 0xa4, 0x74, 0x1c, 0xed, 0x55,
+-      0xc9, 0xda, 0x98, 0xbf, 0xe8, 0xc8, 0xac, 0x6e, 0x63, 0xdd, 0x17, 0x41,
+-      0x27, 0x09, 0x87, 0x08, 0xfb, 0x4e, 0xf5, 0x31, 0x3c, 0x73, 0xbe, 0x78,
+-      0x50, 0xc3, 0xbd, 0x8a, 0x77, 0xd6, 0xff, 0x41, 0x44, 0xbf, 0xf3, 0x99,
+-      0x7d, 0xfd, 0x75, 0xfd, 0xfd, 0x72, 0xfd, 0x51, 0xec, 0x99, 0x30, 0xf8,
+-      0x7b, 0x96, 0x52, 0x08, 0xb0, 0x34, 0x56, 0x22, 0xd6, 0xda, 0xca, 0xb8,
+-      0x9c, 0xab, 0x3e, 0x24, 0xb9, 0x74, 0xab, 0x35, 0x97, 0x96, 0xa8, 0x2d,
+-      0xc3, 0x4e, 0x1e, 0x1d, 0xb6, 0x9b, 0x62, 0x35, 0x2a, 0x12, 0xee, 0x06,
+-      0x5e, 0x5e, 0x5d, 0xe1, 0xdc, 0x41, 0xd4, 0x0d, 0xa2, 0x7f, 0x9f, 0xb5,
+-      0xbe, 0x02, 0xf8, 0x3d, 0xe2, 0xa7, 0xd5, 0x5a, 0x4c, 0x0f, 0xc7, 0xe6,
+-      0xb1, 0xe6, 0xd5, 0xe6, 0xf0, 0xe4, 0x6d, 0x71, 0x30, 0xe7, 0x00, 0xfa,
+-      0x10, 0x57, 0x9c, 0x8b, 0x73, 0x72, 0xbe, 0x08, 0xc6, 0x46, 0xd1, 0x46,
+-      0xb8, 0x5a, 0xad, 0x5c, 0xda, 0xe1, 0xbb, 0x6c, 0x01, 0x7f, 0x5b, 0xc4,
+-      0x5f, 0xef, 0x90, 0x7c, 0xb7, 0xc9, 0x35, 0xda, 0xb0, 0x97, 0xba, 0xbc,
+-      0xe7, 0xed, 0xed, 0x0a, 0xcf, 0x2d, 0x2c, 0xef, 0x0b, 0x26, 0x46, 0x4b,
+-      0x8a, 0x4e, 0x66, 0xb1, 0x1f, 0x4b, 0xd1, 0x84, 0x85, 0xe7, 0x64, 0x93,
+-      0xfd, 0x89, 0xeb, 0xb8, 0x2c, 0xe0, 0x5c, 0xcb, 0x2b, 0x25, 0xfb, 0x6a,
+-      0xf3, 0x17, 0xad, 0x9c, 0xbb, 0x68, 0x6f, 0xaf, 0xb3, 0xff, 0x09, 0xf4,
+-      0x0f, 0xca, 0x62, 0xa5, 0x4f, 0x08, 0x93, 0x1e, 0x77, 0x02, 0xe3, 0xc4,
+-      0xb1, 0xbd, 0x73, 0xf6, 0xd5, 0xf5, 0xf3, 0xf6, 0x35, 0x75, 0x6e, 0x58,
+-      0xab, 0x3d, 0x57, 0x27, 0xde, 0xc6, 0xfe, 0x3f, 0xc4, 0x5b, 0x0c, 0xf3,
+-      0x47, 0x51, 0xee, 0xb3, 0x1a, 0xb5, 0x16, 0xd6, 0x8f, 0xe1, 0x79, 0x2f,
+-      0x1c, 0xde, 0x52, 0x74, 0x77, 0x05, 0x74, 0xe7, 0x78, 0x31, 0x79, 0x66,
+-      0x73, 0x08, 0xfb, 0x88, 0xca, 0xd7, 0xc1, 0x17, 0x03, 0x87, 0xf7, 0x49,
+-      0x1e, 0x7c, 0x41, 0x7a, 0x7b, 0x74, 0xf5, 0x9f, 0x49, 0x31, 0x9a, 0x18,
+-      0xa5, 0xfc, 0x48, 0x4e, 0x80, 0x9e, 0x0d, 0x6b, 0xe7, 0x96, 0xb2, 0x29,
+-      0x5b, 0x1e, 0x16, 0xdb, 0xc3, 0xba, 0x99, 0x31, 0xa7, 0x20, 0x41, 0xb4,
+-      0x65, 0x25, 0xe0, 0x45, 0x25, 0xb7, 0xfa, 0x5e, 0x0b, 0x74, 0x19, 0x5f,
+-      0xc0, 0xa0, 0xc0, 0x92, 0x58, 0xb6, 0xdb, 0x25, 0xc5, 0xe3, 0xac, 0x0f,
+-      0x83, 0xc6, 0xc1, 0xb3, 0x2b, 0x07, 0x00, 0x97, 0x0c, 0xdb, 0xc2, 0xba,
+-      0x61, 0xa7, 0x2c, 0x25, 0xb1, 0x2f, 0xff, 0xa1, 0x65, 0x64, 0x9e, 0xc1,
+-      0xef, 0xa8, 0x59, 0xab, 0xcd, 0x87, 0x96, 0xbd, 0x1a, 0xb1, 0x02, 0xab,
+-      0xe3, 0x72, 0x76, 0x0f, 0xbc, 0x36, 0x80, 0x57, 0x7b, 0xc9, 0xe7, 0xd3,
+-      0x20, 0xde, 0x07, 0xd1, 0xb7, 0xcf, 0x0a, 0xae, 0xde, 0x8d, 0xd3, 0xb5,
+-      0xe6, 0x70, 0x7a, 0x1b, 0x38, 0xb5, 0x57, 0x07, 0xd0, 0xe7, 0x6e, 0x9c,
+-      0x36, 0x80, 0x53, 0x7b, 0x55, 0xe3, 0xb3, 0x01, 0x7c, 0xda, 0x4b, 0x51,
+-      0x94, 0xfb, 0x2c, 0x7b, 0x59, 0xe3, 0xb3, 0x61, 0x78, 0xfa, 0x62, 0x93,
+-      0xb0, 0x66, 0x3b, 0x68, 0x2e, 0x4b, 0xda, 0x81, 0x9c, 0x2a, 0xc8, 0x5c,
+-      0xc5, 0x06, 0xbe, 0x82, 0xe2, 0x4e, 0x58, 0x32, 0xa7, 0xda, 0x0a, 0x92,
+-      0x02, 0x0d, 0x95, 0x9c, 0xb1, 0x51, 0x5b, 0x12, 0xf1, 0xac, 0x0d, 0x7c,
+-      0x57, 0x81, 0xf7, 0x2a, 0x70, 0xae, 0x64, 0xc2, 0x8b, 0xe0, 0xd7, 0x38,
+-      0xce, 0x65, 0x77, 0x7d, 0xc2, 0xa9, 0x2b, 0x9e, 0x8d, 0x9b, 0x33, 0x23,
+-      0xed, 0xf3, 0x9c, 0x62, 0x38, 0x2f, 0x75, 0x7e, 0xd6, 0x5f, 0x66, 0xf6,
+-      0x49, 0x6a, 0x39, 0xa0, 0xce, 0x2b, 0xbd, 0xfa, 0xae, 0xf6, 0x79, 0xd9,
+-      0x13, 0x94, 0x65, 0x3c, 0x23, 0x91, 0xd4, 0x12, 0xcf, 0x29, 0x9b, 0x0a,
+-      0x08, 0xcf, 0x2a, 0x24, 0xd9, 0x19, 0x9e, 0x4b, 0x54, 0x92, 0xab, 0x3c,
+-      0xb3, 0x0d, 0x73, 0x5e, 0xfa, 0x9c, 0x92, 0x7b, 0x9c, 0x53, 0xd2, 0x9c,
+-      0xd3, 0x76, 0xf3, 0x8a, 0x39, 0xa7, 0x7f, 0x2b, 0x86, 0xe6, 0xdf, 0x10,
+-      0x07, 0x36, 0x70, 0x10, 0xbc, 0x03, 0x07, 0xdd, 0x6d, 0x1c, 0xc4, 0x6d,
+-      0xec, 0xe1, 0xae, 0xfd, 0x77, 0xd6, 0x75, 0xee, 0x5d, 0x4a, 0x41, 0x4f,
+-      0xac, 0x85, 0x0a, 0xe1, 0x0e, 0x48, 0x71, 0x86, 0x30, 0x52, 0xae, 0x6b,
+-      0x58, 0xf3, 0x2b, 0x94, 0x6d, 0x07, 0x04, 0x34, 0xf1, 0xb6, 0x80, 0x1a,
+-      0x53, 0x92, 0x85, 0x26, 0xdb, 0x4a, 0x92, 0xcb, 0x80, 0x5e, 0x6b, 0xac,
+-      0x03, 0x83, 0x6e, 0x6a, 0x3e, 0xde, 0xd1, 0x07, 0xd1, 0x36, 0x1e, 0xf3,
+-      0x95, 0x38, 0xe4, 0x74, 0x10, 0xe5, 0xd7, 0x50, 0xee, 0xb3, 0x66, 0x6a,
+-      0x7f, 0x65, 0x49, 0x5f, 0x4b, 0x9c, 0x09, 0xee, 0x31, 0x36, 0x9d, 0x73,
+-      0x4b, 0x31, 0x47, 0xde, 0x26, 0xce, 0x3b, 0x43, 0x22, 0x83, 0x09, 0xa7,
+-      0x28, 0xff, 0x05, 0xed, 0x89, 0x58, 0x56, 0xfe, 0xb7, 0x4f, 0xbb, 0xc0,
+-      0x43, 0xcf, 0xeb, 0x59, 0xf5, 0xc4, 0x7a, 0x8e, 0xcb, 0xa0, 0x2e, 0x24,
+-      0xb3, 0xd0, 0x31, 0x05, 0x97, 0xeb, 0x71, 0xfe, 0xf8, 0x2c, 0xd7, 0xcd,
+-      0x37, 0x7d, 0x7d, 0x20, 0xd9, 0x80, 0xc7, 0x36, 0xf2, 0xe5, 0xa4, 0x95,
+-      0x6f, 0x12, 0x57, 0x19, 0x71, 0x9b, 0x1a, 0x66, 0x0d, 0x6b, 0x1b, 0x4e,
+-      0xf0, 0x6b, 0x16, 0x34, 0x49, 0xd8, 0xe2, 0xe0, 0x9b, 0x73, 0x01, 0xff,
+-      0x1c, 0x82, 0xde, 0xa4, 0x2c, 0x42, 0x3f, 0x96, 0x2b, 0x9c, 0xef, 0x33,
+-      0x56, 0xe0, 0xb2, 0x3f, 0x3f, 0xcf, 0x86, 0x73, 0xeb, 0xf9, 0xca, 0xcd,
+-      0xd7, 0x0c, 0xef, 0x2b, 0x3d, 0x88, 0xf9, 0x4a, 0x1d, 0xf3, 0x95, 0xc8,
+-      0xb3, 0x07, 0x94, 0xae, 0x39, 0x4e, 0xfc, 0x9d, 0x47, 0xdb, 0x2d, 0xd0,
+-      0x08, 0xf9, 0x81, 0xfc, 0x41, 0x5e, 0x7d, 0xb7, 0x8d, 0xfd, 0x76, 0xe0,
+-      0x76, 0x06, 0x72, 0x98, 0xbc, 0x11, 0x96, 0x7c, 0x94, 0xf5, 0x8f, 0x1b,
+-      0x98, 0x20, 0x13, 0xd4, 0xfb, 0xf1, 0x1e, 0x5f, 0x3e, 0x82, 0x16, 0x01,
+-      0xdb, 0xf3, 0x6a, 0x8f, 0xb6, 0xe7, 0x01, 0x37, 0x9d, 0x30, 0x72, 0xdf,
+-      0x9e, 0x91, 0xdb, 0x3e, 0xbc, 0x3c, 0x2b, 0xca, 0x55, 0xb1, 0xd6, 0x33,
+-      0x61, 0xc8, 0x70, 0x5b, 0xf2, 0x69, 0xd0, 0x66, 0x3a, 0x60, 0xe4, 0xc3,
+-      0x8b, 0xc6, 0x56, 0xd2, 0x38, 0x0e, 0x2a, 0x3d, 0xbe, 0x88, 0x79, 0x4f,
+-      0x00, 0x46, 0xce, 0x19, 0xb4, 0xd6, 0x2a, 0x11, 0xe8, 0x6c, 0xc0, 0xe6,
+-      0x24, 0xe2, 0x80, 0x09, 0xef, 0x7e, 0x9f, 0x88, 0x2c, 0x6c, 0xfa, 0xeb,
+-      0x2e, 0xb6, 0xf5, 0x45, 0x49, 0xe1, 0xdb, 0x99, 0x0d, 0xec, 0xd0, 0xc6,
+-      0xcc, 0xc9, 0xca, 0x99, 0x96, 0xed, 0x92, 0x06, 0xdd, 0xd1, 0x86, 0x44,
+-      0x26, 0x37, 0x32, 0xef, 0x06, 0xbf, 0xa1, 0x1e, 0x63, 0xca, 0xcd, 0x52,
+-      0xc4, 0x76, 0x5d, 0x94, 0x94, 0x3f, 0x27, 0xba, 0x6f, 0xb8, 0x3e, 0xbd,
+-      0x0c, 0x49, 0xc8, 0x6d, 0xb5, 0x36, 0x70, 0x26, 0x47, 0x9b, 0xbf, 0x6c,
+-      0x7d, 0x35, 0xa8, 0xed, 0x15, 0xdb, 0xfb, 0xa9, 0xa5, 0xd7, 0x8c, 0x4f,
+-      0x27, 0x15, 0x1e, 0x62, 0x5d, 0xfa, 0xdd, 0x35, 0xef, 0xd7, 0x22, 0x46,
+-      0x87, 0x99, 0xf7, 0xf9, 0xa0, 0xb6, 0x7f, 0xc2, 0x3d, 0xe4, 0xa3, 0xa0,
+-      0xe7, 0xf4, 0xe0, 0x9c, 0xc3, 0x21, 0x6f, 0x6a, 0x7c, 0x43, 0xf5, 0x2b,
+-      0x99, 0x7e, 0xd1, 0x6e, 0x3d, 0xee, 0xd4, 0xf4, 0x88, 0xa2, 0xa1, 0x4f,
+-      0x4f, 0x0f, 0xab, 0xf2, 0xb3, 0xd3, 0x29, 0x55, 0x2e, 0x4e, 0xbb, 0xaa,
+-      0x3c, 0xaf, 0xfa, 0x5b, 0xde, 0x90, 0xa9, 0x1f, 0x9d, 0x8e, 0xab, 0x72,
+-      0xdc, 0x94, 0x69, 0x53, 0x66, 0x4c, 0x39, 0x69, 0x4a, 0xcf, 0x94, 0x59,
+-      0x53, 0x16, 0xcc, 0x7c, 0x53, 0xe6, 0xfd, 0x98, 0x29, 0x67, 0x4c, 0x79,
+-      0xdc, 0x94, 0x1f, 0x31, 0xe5, 0x09, 0x03, 0xd7, 0xbc, 0x29, 0x3f, 0x6e,
+-      0xea, 0x4f, 0x1b, 0x38, 0x3f, 0x03, 0x78, 0x1e, 0x09, 0xed, 0xd0, 0xca,
+-      0x69, 0x4d, 0x5f, 0x15, 0x47, 0xca, 0x9b, 0xdc, 0x7f, 0x1c, 0x32, 0x25,
+-      0x88, 0xb3, 0x04, 0xbf, 0x3b, 0xa4, 0x09, 0x17, 0x72, 0x38, 0x88, 0x33,
+-      0xe4, 0xf3, 0x69, 0xf9, 0x53, 0xf4, 0x1d, 0xbd, 0xe0, 0xc8, 0x62, 0x95,
+-      0xfa, 0xf5, 0x5b, 0xf2, 0x6a, 0x85, 0xe7, 0xf1, 0xbc, 0xdc, 0xa8, 0xa4,
+-      0xe2, 0x41, 0x8b, 0x74, 0x94, 0x98, 0x7c, 0x45, 0x12, 0x90, 0xfd, 0x63,
+-      0x71, 0x96, 0xd7, 0xa8, 0x54, 0xd0, 0xef, 0xa0, 0x5a, 0xfb, 0x79, 0x01,
+-      0x4c, 0x72, 0xa5, 0xd2, 0x0d, 0x99, 0xf5, 0x4a, 0x8b, 0x7a, 0xfd, 0xfc,
+-      0xa6, 0xc8, 0xc8, 0x05, 0xe2, 0xf9, 0x5b, 0xb2, 0x51, 0x21, 0xde, 0x9f,
+-      0x87, 0xad, 0x90, 0x4a, 0xbf, 0x28, 0x89, 0xd1, 0x8b, 0xc2, 0xf9, 0xc6,
+-      0xd2, 0x28, 0xe3, 0x65, 0xfc, 0xce, 0x41, 0xde, 0x76, 0x4f, 0xe8, 0xf9,
+-      0x86, 0xcd, 0x7c, 0x2e, 0xec, 0xc2, 0x5b, 0x0e, 0x65, 0xe0, 0x7f, 0xb5,
+-      0xf4, 0x9e, 0xb4, 0x3c, 0xcc, 0x3a, 0x41, 0x96, 0xb6, 0xcf, 0x23, 0xf6,
+-      0xc4, 0xf5, 0x16, 0xe4, 0x31, 0xf9, 0xdf, 0xd4, 0x6d, 0x1b, 0xfe, 0x92,
+-      0x9a, 0xed, 0x81, 0x3e, 0x33, 0xc3, 0x58, 0x83, 0xef, 0x71, 0xd8, 0x9a,
+-      0x52, 0x22, 0x1e, 0x8a, 0x95, 0x5f, 0xb5, 0xb2, 0x41, 0x6d, 0x9f, 0x6a,
+-      0x19, 0xc1, 0x76, 0x4b, 0xf2, 0xe8, 0xbb, 0x60, 0x64, 0x66, 0xa1, 0x79,
+-      0x4b, 0xc9, 0x8d, 0xaf, 0x2b, 0x1a, 0x4e, 0x9c, 0x2f, 0x09, 0x75, 0x86,
+-      0x1d, 0xa0, 0x4c, 0xbb, 0x92, 0xae, 0xb7, 0x16, 0xaa, 0x94, 0xc1, 0xc3,
+-      0x52, 0xac, 0x0d, 0x97, 0x6c, 0x94, 0xa7, 0xeb, 0x31, 0x39, 0x5d, 0xe1,
+-      0x3c, 0xfb, 0xd1, 0xc7, 0x45, 0x1d, 0x18, 0x6b, 0x90, 0xf2, 0x98, 0x6b,
+-      0xbe, 0x6e, 0xe9, 0x35, 0xb1, 0x07, 0x77, 0xcb, 0xfa, 0x44, 0xf3, 0x9a,
+-      0x55, 0xac, 0xd3, 0x4e, 0x42, 0x7d, 0xb3, 0x53, 0x66, 0xfb, 0xf2, 0xfa,
+-      0x79, 0xac, 0x5d, 0xc0, 0x7a, 0x59, 0x25, 0xb3, 0xba, 0x21, 0xf7, 0x7e,
+-      0x52, 0xf9, 0x72, 0xab, 0x5c, 0x1d, 0x95, 0x8b, 0x9b, 0x71, 0x39, 0x52,
+-      0x19, 0x97, 0x8d, 0x4d, 0x4f, 0x0a, 0x95, 0xb4, 0xac, 0xa3, 0x4f, 0xbe,
+-      0x92, 0x91, 0xb5, 0xcd, 0x63, 0xea, 0xac, 0x2f, 0x42, 0x2e, 0x6d, 0xa0,
+-      0x4f, 0x63, 0x73, 0x12, 0x3f, 0xdf, 0x1e, 0x88, 0xa1, 0xdf, 0x10, 0xfa,
+-      0x88, 0xf5, 0xb3, 0xca, 0x3d, 0xc0, 0x21, 0xe6, 0xae, 0xfa, 0xb6, 0xc1,
+-      0xb8, 0x2c, 0x54, 0x79, 0x4e, 0x2f, 0x4c, 0x6f, 0xac, 0xc4, 0xb2, 0xd4,
+-      0x77, 0xa7, 0x9b, 0xc3, 0xe0, 0x53, 0xe8, 0xef, 0x2a, 0x65, 0x42, 0x50,
+-      0x8a, 0x90, 0xb5, 0x0d, 0xc0, 0x46, 0x58, 0x1b, 0xb0, 0xdf, 0x8b, 0xcd,
+-      0x21, 0x94, 0x0e, 0x4a, 0xac, 0x03, 0xd8, 0x8b, 0x4d, 0x17, 0x65, 0x0c,
+-      0xa5, 0xd6, 0xed, 0x27, 0x9b, 0x9c, 0x3f, 0xab, 0x74, 0x90, 0xc6, 0xf1,
+-      0xd4, 0x1d, 0xb6, 0x7a, 0xc0, 0x5b, 0xb4, 0x8a, 0x2b, 0x62, 0xe7, 0xd2,
+-      0x21, 0xfa, 0x0b, 0x90, 0x2b, 0x37, 0x0f, 0x68, 0x58, 0x3e, 0x1b, 0xa0,
+-      0xdc, 0x09, 0xba, 0xe7, 0x81, 0xaf, 0x5e, 0xc9, 0x06, 0x69, 0x73, 0xf1,
+-      0x59, 0x5a, 0x01, 0xcf, 0xa5, 0xad, 0x12, 0x0c, 0x50, 0x5f, 0x45, 0xd9,
+-      0xa7, 0xde, 0xa2, 0x5c, 0xca, 0xd5, 0xb4, 0x6d, 0x5e, 0x6a, 0xdb, 0xe6,
+-      0xeb, 0xa8, 0xb7, 0x20, 0x3b, 0xe0, 0x9b, 0xd4, 0x79, 0x1e, 0x03, 0x98,
+-      0x33, 0x6b, 0x15, 0x2a, 0xfe, 0x79, 0xd6, 0x5b, 0x4f, 0x54, 0x69, 0xaf,
+-      0xd1, 0x6e, 0x53, 0xf2, 0x49, 0x92, 0xcb, 0x71, 0x23, 0x83, 0x23, 0x8a,
+-      0x37, 0x88, 0x83, 0xe4, 0x72, 0xda, 0xd4, 0x75, 0x77, 0xd4, 0xf9, 0xb2,
+-      0xfa, 0x73, 0x80, 0x61, 0x48, 0x9d, 0xad, 0xed, 0x4d, 0x59, 0x39, 0x65,
+-      0x2b, 0xb6, 0x5a, 0x79, 0x37, 0x24, 0xc5, 0xf1, 0x3f, 0xc2, 0x9e, 0xd8,
+-      0x56, 0x72, 0x40, 0x5a, 0xe0, 0xbb, 0xca, 0x07, 0xe6, 0xdc, 0x84, 0xb2,
+-      0xb3, 0x72, 0x15, 0xf8, 0x38, 0x5a, 0xd5, 0x95, 0xfa, 0xa1, 0x87, 0xdc,
+-      0x25, 0xd2, 0x53, 0xbd, 0xb5, 0x0c, 0x9c, 0xce, 0x2c, 0x15, 0xac, 0xe4,
+-      0x12, 0xe8, 0x63, 0x10, 0xb6, 0x87, 0x1b, 0x91, 0xdc, 0x65, 0xd2, 0x11,
+-      0xfb, 0xb0, 0xbe, 0x4b, 0x66, 0xa2, 0xbb, 0x6d, 0x9b, 0x87, 0x0e, 0x68,
+-      0x9d, 0x8f, 0xbe, 0x4b, 0x70, 0xe6, 0x7a, 0xb5, 0x9f, 0x92, 0x5c, 0xa5,
+-      0x9c, 0x2d, 0x40, 0xd7, 0x53, 0xe7, 0xf4, 0xc0, 0x9e, 0x61, 0x3d, 0xe7,
+-      0x44, 0xdb, 0xc5, 0xac, 0x05, 0xfd, 0x66, 0x97, 0x95, 0x8d, 0x3e, 0x89,
+-      0xf2, 0xde, 0x20, 0x6d, 0x5b, 0xea, 0x90, 0xe4, 0xaa, 0x3f, 0x47, 0x27,
+-      0x3e, 0xf6, 0x29, 0x9d, 0x34, 0xe0, 0x0d, 0xa8, 0x79, 0x61, 0x97, 0x58,
+-      0x73, 0x6a, 0xde, 0x58, 0xc7, 0xbc, 0x68, 0xbb, 0xf8, 0xb7, 0x01, 0x3d,
+-      0x0f, 0xf0, 0xac, 0xf6, 0xc4, 0x36, 0x8e, 0x29, 0x58, 0x79, 0xd8, 0x4e,
+-      0x33, 0x69, 0x5b, 0x02, 0x83, 0x7e, 0x5f, 0xbd, 0xaf, 0x02, 0xf6, 0x95,
+-      0xc3, 0xbe, 0xec, 0xc1, 0xdd, 0xfb, 0x2a, 0x05, 0xf4, 0xbe, 0x06, 0x3a,
+-      0x60, 0x8a, 0xee, 0x5a, 0xbf, 0x73, 0x5f, 0x68, 0xbb, 0xb8, 0x7b, 0x8e,
+-      0xc7, 0x06, 0xf4, 0x1c, 0xd1, 0x8e, 0x39, 0x06, 0x77, 0xcd, 0x01, 0x7a,
+-      0x8e, 0x72, 0xfc, 0xe0, 0x1e, 0xe3, 0x5f, 0xef, 0xd5, 0xe3, 0x39, 0xa6,
+-      0x0b, 0x7a, 0x58, 0x9d, 0x75, 0x58, 0xc9, 0xd4, 0xb6, 0xad, 0x76, 0x1a,
+-      0x3a, 0xaf, 0x73, 0xcc, 0x9d, 0x76, 0xa6, 0xad, 0xec, 0xcc, 0x3b, 0xe8,
+-      0xcc, 0x7a, 0x14, 0x3e, 0x73, 0x6a, 0x19, 0xbe, 0x73, 0xe5, 0xed, 0x58,
+-      0xf7, 0xcf, 0xe0, 0x87, 0x42, 0x16, 0x8d, 0xd2, 0x2f, 0x98, 0x14, 0xe5,
+-      0x97, 0x8e, 0xc2, 0xff, 0x75, 0xf6, 0x29, 0x5b, 0xb4, 0x38, 0x3a, 0xee,
+-      0xfb, 0x0b, 0xd6, 0x2c, 0xe4, 0x46, 0x71, 0x14, 0x36, 0x7d, 0x14, 0xf8,
+-      0x72, 0x47, 0x30, 0x8e, 0xf0, 0xbc, 0x3b, 0x44, 0x9f, 0xf5, 0x99, 0xea,
+-      0x2c, 0xde, 0xf7, 0xa1, 0xfd, 0xe7, 0x06, 0xce, 0x3e, 0xf4, 0xf9, 0x57,
+-      0xa8, 0x63, 0x1b, 0xfb, 0x70, 0x8a, 0x1f, 0xe0, 0xfd, 0x41, 0xf4, 0x01,
+-      0x4f, 0x81, 0x53, 0x6c, 0xf7, 0x30, 0x7e, 0x2f, 0xa3, 0xee, 0xdd, 0xa8,
+-      0xbb, 0x8e, 0xba, 0x43, 0x78, 0xff, 0xe1, 0xae, 0x79, 0xdf, 0x81, 0xf7,
+-      0xcf, 0xa1, 0x1d, 0xfb, 0x77, 0x5e, 0x44, 0xfb, 0x83, 0xf8, 0xfd, 0xc5,
+-      0xae, 0x3e, 0x8d, 0x5d, 0xef, 0xbe, 0xbc, 0x79, 0xc9, 0xf0, 0xc0, 0x8e,
+-      0x6f, 0x07, 0xfe, 0xb1, 0xa8, 0x8f, 0x0a, 0x15, 0xca, 0x9b, 0xb0, 0x3c,
+-      0xb2, 0xe2, 0xcb, 0x1c, 0x91, 0x79, 0xc8, 0xfa, 0x42, 0x45, 0xbc, 0x6e,
+-      0x19, 0x9e, 0xfc, 0x31, 0x64, 0xfa, 0x3c, 0xf0, 0x5a, 0x80, 0x7d, 0x71,
+-      0x74, 0x25, 0x8c, 0xe7, 0x21, 0xc8, 0x3b, 0xc9, 0x74, 0x09, 0x79, 0x3e,
+-      0x02, 0xd9, 0xd2, 0x0b, 0x9e, 0x57, 0x3e, 0x88, 0x3c, 0x0e, 0xb9, 0x34,
+-      0x8b, 0xbe, 0xb3, 0xe8, 0xf3, 0xd1, 0xe6, 0xff, 0x31, 0xb4, 0xec, 0xc3,
+-      0xf0, 0xec, 0x2e, 0x18, 0xc2, 0xe2, 0xae, 0x92, 0x1f, 0x5f, 0x98, 0x9e,
+-      0x5b, 0x89, 0xc8, 0xf0, 0xaa, 0x9d, 0xa4, 0xb3, 0x3f, 0xb2, 0xca, 0x98,
+-      0x84, 0x8c, 0x04, 0x85, 0xb2, 0x5f, 0xc6, 0x43, 0xb0, 0xd1, 0x02, 0xde,
+-      0x30, 0x74, 0x94, 0x7a, 0x97, 0x2c, 0x60, 0xcb, 0x36, 0x77, 0x62, 0x13,
+-      0x47, 0xda, 0xb1, 0x89, 0x21, 0xe8, 0x88, 0xd7, 0x83, 0x5a, 0x5e, 0x45,
+-      0x40, 0x27, 0x6f, 0x01, 0xfe, 0x29, 0x5b, 0x42, 0xe0, 0x1f, 0x07, 0xbc,
+-      0xf3, 0x26, 0xda, 0x6f, 0xd4, 0x5b, 0xa0, 0x77, 0xc8, 0x38, 0x9b, 0xf5,
+-      0x2c, 0xd1, 0x96, 0x21, 0x0f, 0xe0, 0xbd, 0xd1, 0xc9, 0x6b, 0xe7, 0xb4,
+-      0x8d, 0x75, 0x97, 0x6f, 0xf3, 0xa0, 0xa3, 0x69, 0x91, 0xf6, 0xfa, 0xe1,
+-      0xd0, 0x9d, 0x7b, 0xfc, 0xa3, 0x5d, 0x7b, 0x0c, 0x4a, 0x72, 0x89, 0xf8,
+-      0x8d, 0xa8, 0xbd, 0xfa, 0xf8, 0x2d, 0x2a, 0x5b, 0x7e, 0x1c, 0x3e, 0x89,
+-      0x40, 0x9a, 0x2b, 0x5b, 0x14, 0x3a, 0xb1, 0x0f, 0xb2, 0x9e, 0x72, 0x9e,
+-      0xf8, 0x0e, 0x03, 0x87, 0x11, 0xfc, 0x1c, 0xfc, 0x76, 0x70, 0x7a, 0xb2,
+-      0xbd, 0x3f, 0x7f, 0x0f, 0xeb, 0x90, 0x55, 0x2c, 0x09, 0x3f, 0xf0, 0x71,
+-      0x91, 0xcf, 0x90, 0xaf, 0x7d, 0x94, 0xb7, 0x3e, 0x4c, 0x8f, 0xed, 0x82,
+-      0x89, 0xb8, 0x21, 0x4c, 0xf5, 0x16, 0x6c, 0x8b, 0x28, 0xa3, 0x60, 0xa7,
+-      0x9b, 0xd4, 0x29, 0x5c, 0x73, 0x92, 0xf6, 0xb6, 0x81, 0x93, 0x7a, 0xc5,
+-      0x93, 0x73, 0x95, 0xb7, 0x1b, 0xb8, 0x78, 0xbe, 0xb0, 0xf9, 0x96, 0xb8,
+-      0x7e, 0x54, 0xe9, 0x1e, 0x0d, 0xd3, 0x6e, 0xfc, 0xd0, 0x3f, 0x27, 0x7e,
+-      0xa8, 0x0f, 0x88, 0x4b, 0xda, 0xd4, 0xc4, 0xe7, 0xef, 0x00, 0x9f, 0xec,
+-      0xeb, 0x1a, 0xdd, 0xf2, 0x2e, 0x03, 0xd7, 0xdd, 0xfa, 0xf8, 0xf4, 0x1d,
+-      0xfa, 0xd8, 0xc7, 0xf1, 0x5e, 0x67, 0xf1, 0xfb, 0x7d, 0xbe, 0xcc, 0x1d,
+-      0x5e, 0xdd, 0xab, 0x7d, 0xd9, 0xb4, 0xb3, 0xad, 0xb3, 0xfe, 0xdb, 0x7d,
+-      0xfe, 0x19, 0x0e, 0x2f, 0xef, 0x6e, 0xeb, 0x3b, 0xb0, 0x33, 0x66, 0xf7,
+-      0x7c, 0x3f, 0xee, 0xdb, 0xdb, 0xaf, 0xdd, 0xf1, 0xeb, 0xe0, 0xab, 0xd8,
+-      0x3b, 0x7b, 0xc9, 0xda, 0xf3, 0xcd, 0x82, 0xad, 0xf7, 0xc2, 0x3e, 0x68,
+-      0x6b, 0x6e, 0xf5, 0x07, 0x95, 0x6e, 0xcc, 0xda, 0xf4, 0x63, 0x4a, 0x6b,
+-      0x7c, 0xbe, 0x07, 0x65, 0xe7, 0xd8, 0x21, 0xf0, 0x40, 0x16, 0x7d, 0x39,
+-      0xc7, 0xee, 0xf1, 0xbe, 0x8d, 0x94, 0x96, 0x85, 0x5a, 0x08, 0xed, 0x89,
+-      0x6c, 0x49, 0x1e, 0x86, 0xaf, 0x98, 0x98, 0xa2, 0xdf, 0x00, 0x7f, 0x79,
+-      0x46, 0xe4, 0x98, 0x94, 0x6b, 0x1f, 0x94, 0x85, 0x95, 0x96, 0xbc, 0x1f,
+-      0x7a, 0xf0, 0xf7, 0xa0, 0x47, 0xe5, 0x12, 0x84, 0xd7, 0x25, 0x1c, 0xc6,
+-      0xa5, 0xa8, 0xd8, 0x4f, 0xc1, 0x96, 0xbf, 0x10, 0x93, 0xe0, 0x05, 0xd2,
+-      0x5e, 0xca, 0x79, 0xbf, 0x48, 0xbf, 0x2d, 0x57, 0xe1, 0x08, 0x25, 0x26,
+-      0xb3, 0x92, 0x82, 0xfd, 0x37, 0xe6, 0x34, 0x50, 0x96, 0x25, 0x35, 0xfa,
+-      0xb4, 0xa0, 0xef, 0x25, 0xf4, 0xc5, 0xb8, 0x9e, 0x8d, 0x38, 0x7e, 0x83,
+-      0xd2, 0xbb, 0x41, 0x18, 0x92, 0xa6, 0x24, 0x2c, 0x3f, 0x6c, 0xd1, 0xd7,
+-      0x7d, 0x66, 0x33, 0x0c, 0xdd, 0x14, 0x97, 0xe7, 0x20, 0x67, 0x9f, 0x55,
+-      0xf1, 0x17, 0xb7, 0xed, 0x8f, 0x3e, 0x7a, 0x18, 0x74, 0xb7, 0x2c, 0xe1,
+-      0xa8, 0xf7, 0x73, 0x59, 0x59, 0x6e, 0xc1, 0xef, 0xa1, 0xac, 0x7f, 0x00,
+-      0xf2, 0x2a, 0xf1, 0xa5, 0x12, 0x6d, 0x49, 0x37, 0x03, 0xd8, 0x4b, 0x32,
+-      0x73, 0xf8, 0x5d, 0x03, 0x9a, 0x3e, 0x8e, 0x49, 0x70, 0xb9, 0x00, 0xfb,
+-      0xf9, 0x8c, 0x2c, 0xa6, 0xe1, 0x9f, 0xda, 0xa5, 0x56, 0xc0, 0x75, 0x63,
+-      0xd0, 0xdb, 0xd0, 0xa7, 0x2b, 0xf4, 0x87, 0xe5, 0xc8, 0x32, 0xfb, 0x9c,
+-      0x01, 0x6d, 0x75, 0x01, 0x77, 0xdd, 0x72, 0x36, 0x9a, 0x28, 0xe5, 0xc1,
+-      0x4f, 0xb6, 0xdb, 0x0f, 0x5e, 0x66, 0x49, 0xfd, 0xf6, 0x34, 0xe8, 0x87,
+-      0xcf, 0x38, 0xce, 0x55, 0xd6, 0x27, 0x51, 0xb2, 0xde, 0x15, 0x7b, 0x29,
+-      0x8c, 0xb9, 0xa0, 0x93, 0x2e, 0x97, 0xe4, 0x6c, 0xe6, 0x98, 0x34, 0x6a,
+-      0xf0, 0xc9, 0x33, 0xb0, 0xa3, 0xea, 0x9e, 0x34, 0x2a, 0xb4, 0x9f, 0x4e,
+-      0x81, 0x1f, 0x5e, 0x41, 0x39, 0x8f, 0xf2, 0x16, 0xca, 0x8f, 0xa3, 0x7c,
+-      0x0d, 0x25, 0x61, 0x3f, 0x25, 0x8d, 0xfa, 0x55, 0xcc, 0xcd, 0x39, 0xa6,
+-      0x0c, 0xcc, 0xf0, 0x21, 0x0f, 0x9f, 0x82, 0x9d, 0xe3, 0xd7, 0x9f, 0x12,
+-      0x69, 0x7c, 0x0c, 0xbf, 0x96, 0x7a, 0xa7, 0x8f, 0xb9, 0x90, 0x99, 0x84,
+-      0xbd, 0x2b, 0xd6, 0xd9, 0xcc, 0xc7, 0xcd, 0x3c, 0x1f, 0xc3, 0x7a, 0xd7,
+-      0xb1, 0x76, 0x18, 0xe7, 0xd9, 0x92, 0x47, 0xd3, 0x67, 0xe4, 0x93, 0xe9,
+-      0x7b, 0x65, 0x62, 0x20, 0x5c, 0x0a, 0x7b, 0xdc, 0x3f, 0xed, 0xda, 0xbd,
+-      0xf6, 0xef, 0xef, 0x9b, 0x7b, 0x8e, 0x60, 0x2f, 0xfb, 0xb5, 0xed, 0x66,
+-      0xff, 0x13, 0xe3, 0x73, 0x58, 0x92, 0x1c, 0xe1, 0x7c, 0x9e, 0x04, 0x96,
+-      0x47, 0x9c, 0x8c, 0x3d, 0x06, 0xeb, 0x3d, 0x85, 0xdf, 0x19, 0xd0, 0x8a,
+-      0x7b, 0x3e, 0x69, 0xff, 0x47, 0xc0, 0x84, 0xb6, 0x06, 0xd7, 0x11, 0x2b,
+-      0x78, 0xe8, 0x26, 0xf6, 0x56, 0x92, 0xee, 0x43, 0x9e, 0xdc, 0x6e, 0xf2,
+-      0x19, 0x92, 0xf2, 0xd2, 0x31, 0xf9, 0x71, 0xed, 0xba, 0x9c, 0xab, 0x1d,
+-      0x93, 0x97, 0x51, 0x2e, 0xd6, 0x4a, 0xc0, 0x23, 0x7d, 0x46, 0xce, 0xd1,
+-      0xc2, 0xb9, 0x50, 0x2e, 0xdf, 0x1f, 0x9b, 0xc7, 0xf9, 0xcd, 0x3a, 0x2d,
+-      0xd9, 0x48, 0x97, 0x64, 0x63, 0x12, 0x63, 0xea, 0x3d, 0x12, 0xfa, 0x2a,
+-      0xf7, 0xdb, 0x27, 0xf9, 0x5a, 0x49, 0x0a, 0x19, 0xfa, 0x34, 0xbd, 0x92,
+-      0x87, 0x4d, 0x0e, 0x3b, 0xe8, 0x8c, 0x8e, 0xb3, 0xb9, 0xb1, 0x22, 0x6c,
+-      0xf8, 0x85, 0xe6, 0xeb, 0x56, 0xa3, 0x6d, 0xff, 0x6f, 0x59, 0xcf, 0xc2,
+-      0x76, 0xfd, 0x0e, 0xe4, 0xc6, 0x73, 0xb0, 0x09, 0x9f, 0xbd, 0x83, 0xc7,
+-      0x48, 0x23, 0xd7, 0xac, 0x46, 0x7d, 0x94, 0x7c, 0x66, 0xf8, 0x01, 0x63,
+-      0xe1, 0xe7, 0x34, 0x6a, 0xb7, 0x0c, 0xfd, 0x29, 0x5b, 0x00, 0xe7, 0x42,
+-      0xbd, 0xf2, 0x77, 0xf0, 0xaf, 0x28, 0x77, 0x7c, 0xbd, 0xaf, 0xfd, 0x86,
+-      0x3a, 0x60, 0xcd, 0x47, 0x13, 0x80, 0x4a, 0xa4, 0x5e, 0x2f, 0x28, 0x5c,
+-      0xb9, 0xcb, 0x43, 0x52, 0xab, 0x12, 0xbf, 0x09, 0xc7, 0xb6, 0x95, 0x5d,
+-      0x0b, 0xbc, 0xba, 0x38, 0x1f, 0xbf, 0x3d, 0x01, 0xff, 0xe1, 0x8c, 0x38,
+-      0x13, 0xbd, 0xd8, 0x13, 0x9f, 0x45, 0x66, 0x2e, 0xff, 0x3a, 0x19, 0xd0,
+-      0x05, 0xbf, 0x3e, 0x84, 0xb3, 0x8c, 0xc8, 0x59, 0xd8, 0xff, 0xe7, 0x40,
+-      0x47, 0x9f, 0xaf, 0x0c, 0xc9, 0xf9, 0x4a, 0x1c, 0xfe, 0x16, 0xed, 0x94,
+-      0xe5, 0xe9, 0xe4, 0x3a, 0xcb, 0x27, 0xa6, 0x53, 0x75, 0x96, 0x5f, 0x32,
+-      0xfe, 0xe2, 0x97, 0x8d, 0x1f, 0xb9, 0x3e, 0xad, 0x7d, 0xb8, 0xaf, 0x4d,
+-      0x8f, 0xaa, 0xb2, 0x39, 0xbd, 0x13, 0x3b, 0x09, 0x1b, 0xbd, 0x9d, 0xa1,
+-      0x7e, 0x06, 0x8c, 0x12, 0x3c, 0x09, 0x7a, 0x9a, 0x87, 0xdc, 0xce, 0xc1,
+-      0xf7, 0x38, 0x0b, 0x1f, 0xa4, 0xd8, 0x84, 0x4c, 0xf0, 0xd2, 0x28, 0xc5,
+-      0xfc, 0xf9, 0x63, 0xbb, 0x18, 0xdf, 0xe4, 0x99, 0x19, 0xff, 0x2b, 0x4d,
+-      0xff, 0xab, 0xf3, 0x8f, 0xf3, 0x81, 0x36, 0xa9, 0x2b, 0x7f, 0x09, 0x9f,
+-      0x51, 0x82, 0xc5, 0x0c, 0xc7, 0xa6, 0xe9, 0xaf, 0xca, 0x36, 0xec, 0x83,
+-      0xb0, 0xf7, 0x3d, 0x09, 0x3f, 0xd5, 0x6a, 0xbd, 0x0a, 0x59, 0x53, 0x82,
+-      0xcf, 0x68, 0x5b, 0xa8, 0x5f, 0x67, 0x1b, 0xe5, 0xc8, 0x98, 0x73, 0x1b,
+-      0x34, 0x97, 0x3d, 0x2e, 0xf2, 0x5d, 0xd4, 0x35, 0x56, 0x78, 0x06, 0xdf,
+-      0xc7, 0x19, 0x98, 0x33, 0x51, 0x75, 0xec, 0x07, 0xfb, 0x3d, 0xca, 0x7d,
+-      0x8c, 0x39, 0xdd, 0x18, 0x5f, 0x5f, 0xe7, 0x98, 0xc4, 0x24, 0xaf, 0x74,
+-      0xbe, 0xbb, 0xae, 0xf7, 0x77, 0x34, 0x33, 0x2a, 0x57, 0x2b, 0x6a, 0x0e,
+-      0xd0, 0xfa, 0xaf, 0x30, 0x66, 0x0b, 0x74, 0xcb, 0x18, 0x95, 0x27, 0x65,
+-      0xe8, 0xa4, 0x72, 0x25, 0x05, 0xda, 0x09, 0xca, 0x6c, 0x8c, 0x60, 0xbb,
+-      0xb2, 0x5d, 0xf9, 0x72, 0x97, 0x8e, 0x8f, 0xf0, 0x19, 0x3a, 0xac, 0x39,
+-      0x23, 0xbc, 0x1b, 0x81, 0x7d, 0x83, 0x3d, 0x75, 0xe2, 0x42, 0xff, 0x15,
+-      0x71, 0x16, 0x66, 0x8f, 0xea, 0x4f, 0xaf, 0x83, 0xf1, 0x66, 0x9d, 0x02,
+-      0x14, 0x77, 0x1e, 0xeb, 0xa7, 0x2e, 0x05, 0x83, 0x8c, 0xa9, 0x27, 0x2f,
+-      0x81, 0xad, 0x3c, 0x83, 0x8b, 0xa6, 0x4f, 0x6b, 0xbe, 0x2f, 0x4a, 0xda,
+-      0x22, 0x0e, 0x12, 0xa5, 0x2d, 0x20, 0x7b, 0xc0, 0xbb, 0x21, 0x1f, 0x5a,
+-      0xd5, 0x7b, 0xb6, 0x2f, 0x0a, 0xef, 0x5b, 0xe4, 0xf6, 0x4a, 0x22, 0x7d,
+-      0x0b, 0xb2, 0x39, 0x1f, 0x4d, 0x83, 0x56, 0x3e, 0xd1, 0x05, 0x9e, 0x9e,
+-      0xcc, 0xda, 0x3f, 0xe8, 0xd2, 0xb6, 0x20, 0x7c, 0x7e, 0xc6, 0x01, 0x2a,
+-      0x59, 0x8c, 0xe9, 0x96, 0x7f, 0x11, 0xc4, 0x73, 0x93, 0xef, 0xb0, 0x73,
+-      0x82, 0x1a, 0xbe, 0xb2, 0xc1, 0x21, 0xfc, 0x04, 0xd1, 0xb1, 0x5c, 0x4b,
+-      0x3e, 0x04, 0x29, 0x2f, 0x98, 0x3f, 0x69, 0xd6, 0x4a, 0x5e, 0x0c, 0xb7,
+-      0x6d, 0xba, 0xd4, 0xaa, 0x07, 0xdb, 0x22, 0x68, 0x7c, 0x22, 0xca, 0x18,
+-      0xd9, 0xc3, 0xa6, 0xee, 0xb4, 0x8f, 0xc3, 0x2a, 0x5e, 0xc7, 0x7b, 0x24,
+-      0xd2, 0xd6, 0x94, 0xa1, 0xad, 0x8f, 0x81, 0xb6, 0x4e, 0x29, 0xda, 0x6a,
+-      0xc9, 0xab, 0xe9, 0xb4, 0x7c, 0x61, 0x4f, 0xfa, 0xda, 0xfd, 0x17, 0x01,
+-      0xbc, 0xfc, 0x0d, 0xca, 0xc2, 0x17, 0xb1, 0x2e, 0xf4, 0x4e, 0xb9, 0x92,
+-      0xc8, 0xce, 0xd2, 0x16, 0x82, 0x1e, 0x29, 0xc3, 0xe7, 0x4a, 0x5e, 0x1a,
+-      0x52, 0x7d, 0x92, 0xd0, 0x29, 0x0d, 0xd0, 0x1b, 0xf1, 0x5b, 0xae, 0x40,
+-      0x0e, 0x5f, 0x0a, 0x41, 0x6f, 0x91, 0x67, 0x65, 0xc0, 0x86, 0x6c, 0x60,
+-      0xff, 0x06, 0x78, 0x27, 0x79, 0x29, 0x82, 0x32, 0xae, 0xe6, 0x6a, 0x54,
+-      0x5c, 0x35, 0xbe, 0x51, 0x19, 0x55, 0xe3, 0x1a, 0xb0, 0x5f, 0x93, 0x97,
+-      0x20, 0xdf, 0x33, 0x69, 0x19, 0xb9, 0x94, 0x91, 0xf8, 0x25, 0x4b, 0x8a,
+-      0x33, 0xad, 0x56, 0x18, 0xb0, 0x8f, 0x5e, 0xea, 0x97, 0x5b, 0x2a, 0xb6,
+-      0x1a, 0x56, 0xf1, 0xd6, 0xc5, 0xcc, 0x0c, 0x78, 0x93, 0xf8, 0xf3, 0x30,
+-      0xa6, 0x00, 0xfd, 0x58, 0x90, 0xb3, 0x2b, 0xc4, 0x0f, 0xe3, 0xe5, 0xdb,
+-      0xb1, 0x80, 0x24, 0x20, 0xcb, 0x8e, 0xcb, 0x7c, 0xad, 0x1b, 0xb2, 0x2c,
+-      0x08, 0x1d, 0xf8, 0x50, 0xb7, 0xf4, 0x0e, 0x93, 0x1e, 0x80, 0x17, 0x0f,
+-      0x73, 0x17, 0x24, 0x8f, 0x31, 0x85, 0x95, 0x9d, 0xfe, 0x45, 0xe9, 0x06,
+-      0x4f, 0x1d, 0x97, 0x93, 0x35, 0xce, 0x13, 0x74, 0xca, 0x72, 0x10, 0x34,
+-      0xe4, 0x3a, 0x47, 0x30, 0x0f, 0xf4, 0x76, 0xc7, 0x1f, 0xf9, 0x2f, 0xfb,
+-      0x06, 0x34, 0xe9, 0xf3, 0x5d, 0xb8, 0xd4, 0xe5, 0xcd, 0x58, 0xdb, 0x19,
+-      0x09, 0xce, 0x65, 0x3e, 0x60, 0x7d, 0x37, 0x93, 0xb1, 0xae, 0x65, 0xb2,
+-      0xd6, 0xf5, 0x4c, 0xc1, 0xba, 0x01, 0xdd, 0xd4, 0xd8, 0x7c, 0x0e, 0xf4,
+-      0x03, 0xdd, 0xcf, 0x98, 0x79, 0xfb, 0x0c, 0xa3, 0x26, 0x66, 0xf0, 0x9a,
+-      0x6c, 0x54, 0x68, 0x3b, 0xb4, 0x1e, 0x9e, 0x4b, 0x97, 0xee, 0x01, 0x7c,
+-      0x80, 0x83, 0xbe, 0xee, 0x8e, 0xee, 0x08, 0x79, 0xa3, 0xb2, 0xa6, 0x74,
+-      0x47, 0x84, 0xba, 0x23, 0x9d, 0x97, 0xfd, 0xb2, 0x5d, 0x03, 0xff, 0x89,
+-      0xb2, 0x83, 0x65, 0xbb, 0x1e, 0x95, 0x2f, 0x54, 0x7d, 0x5a, 0xe2, 0x7e,
+-      0xcb, 0x6f, 0xea, 0x91, 0x80, 0x4c, 0x29, 0x7d, 0xdd, 0x27, 0x57, 0xd7,
+-      0xe1, 0x0f, 0xc1, 0x5a, 0xb0, 0xef, 0x63, 0xac, 0xc0, 0x56, 0xbe, 0xb1,
+-      0xf4, 0xf3, 0xee, 0xea, 0x2c, 0x70, 0xc5, 0xfb, 0x25, 0xec, 0xb3, 0x9f,
+-      0x3b, 0xf2, 0xdf, 0xc7, 0xc1, 0x93, 0x7c, 0xb6, 0x24, 0x0f, 0xbb, 0x91,
+-      0xf7, 0x5c, 0x79, 0xd8, 0x3d, 0xdb, 0x95, 0x31, 0xc0, 0x15, 0x80, 0x4d,
+-      0x1e, 0x06, 0x1c, 0x55, 0xd5, 0xde, 0xed, 0x8a, 0x35, 0x07, 0x3d, 0x5c,
+-      0x54, 0xf7, 0x57, 0x28, 0xd7, 0xf5, 0xda, 0x79, 0xf8, 0xab, 0xc5, 0xf1,
+-      0x1e, 0xea, 0xb7, 0xd1, 0x12, 0xf9, 0x5e, 0xd9, 0xf1, 0x19, 0xf0, 0xdc,
+-      0x57, 0xba, 0xa9, 0xdb, 0x8f, 0xa6, 0x27, 0xe5, 0x46, 0x85, 0xcf, 0x6c,
+-      0x4f, 0xa4, 0x45, 0xc5, 0x8f, 0x2b, 0xd3, 0x8b, 0xee, 0x6b, 0x86, 0xc7,
+-      0x6a, 0xa0, 0xf1, 0x53, 0xf2, 0x8d, 0xcd, 0x79, 0xf9, 0xf7, 0x9b, 0xb3,
+-      0xb0, 0x4f, 0x4e, 0xc0, 0x3e, 0xf9, 0x08, 0x78, 0xf8, 0x38, 0x78, 0xf8,
+-      0xe3, 0xa0, 0xfb, 0x19, 0x15, 0x77, 0xa8, 0x55, 0x12, 0x57, 0x4a, 0x2a,
+-      0xce, 0xfd, 0x1a, 0x68, 0x7e, 0x42, 0x82, 0xab, 0x43, 0xc0, 0x6b, 0xa9,
+-      0x15, 0x75, 0x5b, 0x0f, 0xc3, 0x06, 0xc1, 0x59, 0x97, 0x12, 0x41, 0x45,
+-      0x23, 0xae, 0xf3, 0x69, 0xe0, 0xf2, 0x4d, 0x5e, 0xa2, 0xc6, 0x23, 0xde,
+-      0xa8, 0x8d, 0x4a, 0xf1, 0x32, 0xfa, 0x2f, 0x47, 0x80, 0x37, 0xea, 0xc6,
+-      0xc4, 0xf9, 0xa2, 0x6c, 0x81, 0x2e, 0xb2, 0xc0, 0xcf, 0x3b, 0xa4, 0x1c,
+-      0x4d, 0x7c, 0x4d, 0x64, 0x52, 0x0e, 0x2d, 0x81, 0xa6, 0x97, 0x6c, 0xec,
+-      0x99, 0xb8, 0xc4, 0xf3, 0x65, 0x4f, 0xec, 0x65, 0xca, 0xa2, 0x03, 0xc6,
+-      0x37, 0xd1, 0xfa, 0xbe, 0x2e, 0x5c, 0x97, 0xeb, 0x7d, 0x46, 0xe6, 0xa1,
+-      0x53, 0x61, 0x7f, 0x43, 0x66, 0xbb, 0x31, 0xac, 0x19, 0x9e, 0xbb, 0xec,
+-      0x84, 0xe7, 0x2f, 0x73, 0x9e, 0xb0, 0x04, 0x96, 0x78, 0xb6, 0x9c, 0x07,
+-      0x3c, 0x80, 0xb9, 0x53, 0x4b, 0xc4, 0xdb, 0x18, 0xc6, 0xfd, 0x63, 0xe8,
+-      0x63, 0x4d, 0x57, 0xb9, 0x65, 0x2d, 0x1f, 0x72, 0x8d, 0x4e, 0x9d, 0x88,
+-      0x33, 0x80, 0xfc, 0xc8, 0x36, 0xb4, 0x7e, 0x2b, 0x28, 0xfd, 0xa7, 0x75,
+-      0xdf, 0x71, 0x81, 0x51, 0xd7, 0xeb, 0xaa, 0xfd, 0x04, 0x96, 0xb7, 0xa8,
+-      0xef, 0xb1, 0x06, 0xc7, 0x84, 0x3a, 0xe0, 0xce, 0x40, 0xee, 0xdc, 0x1b,
+-      0x26, 0xee, 0x1f, 0x83, 0x7e, 0x4d, 0x2e, 0xe9, 0x98, 0x7c, 0xf2, 0x72,
+-      0x1a, 0xfb, 0x91, 0x41, 0x46, 0x17, 0x6c, 0xec, 0xe1, 0x7d, 0x4a, 0x7e,
+-      0x4d, 0x40, 0x66, 0x39, 0xb2, 0x7e, 0x90, 0x67, 0x33, 0x28, 0x8d, 0xa7,
+-      0xf9, 0xce, 0x33, 0xe2, 0x79, 0x93, 0x17, 0xa3, 0xd0, 0x2f, 0x38, 0xa7,
+-      0xbe, 0x21, 0xa9, 0x6f, 0xb2, 0x6d, 0x48, 0xd1, 0x72, 0x10, 0x67, 0xb0,
+-      0x58, 0x69, 0x3d, 0x9c, 0x4b, 0x97, 0x40, 0x6d, 0xc4, 0x39, 0xf1, 0x41,
+-      0xbc, 0x8f, 0x03, 0x36, 0xe2, 0xb8, 0x8f, 0xba, 0x18, 0x75, 0xfb, 0xa5,
+-      0x58, 0x23, 0x3d, 0xa3, 0xac, 0xef, 0x37, 0xbe, 0xde, 0x67, 0x78, 0x27,
+-      0x84, 0xbd, 0x6b, 0x3a, 0x2e, 0x80, 0xa6, 0xca, 0xf0, 0xbb, 0xae, 0x2e,
+-      0x49, 0xf8, 0x4d, 0x90, 0xcf, 0x9f, 0xa2, 0x0c, 0x05, 0x7d, 0x95, 0xd7,
+-      0x27, 0x40, 0x6b, 0x7d, 0x90, 0x97, 0xad, 0xd6, 0x71, 0xd8, 0xc9, 0xa7,
+-      0xd3, 0xc4, 0xd1, 0x4d, 0xe0, 0xa8, 0x3b, 0x76, 0x1a, 0xe7, 0xb5, 0xf6,
+-      0xf4, 0x43, 0x4a, 0x5e, 0xc0, 0xd6, 0x51, 0x7a, 0x4b, 0xc7, 0x38, 0xd2,
+-      0xb4, 0x8d, 0x14, 0x0f, 0xe7, 0x5c, 0xca, 0xc3, 0x3c, 0xf0, 0x30, 0xae,
+-      0xe4, 0xb7, 0x96, 0x2d, 0x3d, 0x52, 0x3c, 0x9e, 0xc5, 0x7e, 0x27, 0x77,
+-      0xf5, 0xcb, 0xe0, 0x1d, 0xb6, 0x5f, 0xf3, 0x43, 0x61, 0xc6, 0x43, 0x03,
+-      0xde, 0xa4, 0x6c, 0x1c, 0x9c, 0x92, 0x8b, 0x07, 0x13, 0x93, 0xb3, 0x36,
+-      0x75, 0xc2, 0x94, 0xd4, 0x9f, 0xce, 0xca, 0x5a, 0x55, 0xeb, 0xe6, 0x39,
+-      0x77, 0x52, 0xf2, 0xcd, 0x02, 0xde, 0x3d, 0x94, 0xec, 0xef, 0xcb, 0x5d,
+-      0x7f, 0x4f, 0x39, 0xee, 0x09, 0x32, 0x42, 0xeb, 0x5e, 0xdb, 0xee, 0xc6,
+-      0xf9, 0x50, 0x2e, 0x7c, 0x10, 0xf5, 0x39, 0xc8, 0x36, 0x9e, 0x67, 0x0a,
+-      0x67, 0x77, 0x4a, 0x9d, 0x53, 0x3e, 0x4d, 0x7f, 0x80, 0x63, 0x12, 0xb1,
+-      0x39, 0xd4, 0xcf, 0x08, 0x75, 0x28, 0xf7, 0xe6, 0xcf, 0xe7, 0x19, 0xf8,
+-      0x03, 0x8c, 0x31, 0xe1, 0xef, 0x33, 0x61, 0xf2, 0x64, 0xc0, 0xf5, 0xeb,
+-      0xc7, 0xa0, 0x7f, 0x43, 0x6a, 0x8d, 0x72, 0x95, 0x75, 0x29, 0x87, 0xe3,
+-      0xf3, 0x69, 0xbe, 0x8b, 0x3c, 0x66, 0xfc, 0xf2, 0xe3, 0xf0, 0x5b, 0xf3,
+-      0xcd, 0xae, 0xdf, 0xa0, 0x7f, 0x77, 0x64, 0x9d, 0x96, 0xcb, 0xdb, 0x31,
+-      0xc7, 0xc8, 0xde, 0x93, 0x35, 0xc6, 0xac, 0x2d, 0xe9, 0x82, 0x2c, 0x3d,
+-      0x2a, 0xc3, 0x46, 0x8e, 0x72, 0x3f, 0x7d, 0x4a, 0xd7, 0xe5, 0x67, 0x62,
+-      0x72, 0x6e, 0xed, 0xff, 0x85, 0xae, 0x7f, 0xbd, 0x5d, 0x57, 0xd8, 0xc3,
+-      0xae, 0xbb, 0x79, 0x19, 0xf2, 0xa0, 0x0a, 0x59, 0x51, 0x85, 0xac, 0xa8,
+-      0x42, 0x56, 0x54, 0x21, 0x2b, 0xaa, 0x90, 0x15, 0x55, 0xc8, 0x8a, 0xea,
+-      0x8c, 0xd1, 0x9b, 0xa7, 0x21, 0x73, 0xe9, 0xf3, 0xd0, 0xcf, 0xe9, 0xb4,
+-      0x05, 0xe2, 0x90, 0x25, 0xf4, 0x67, 0x12, 0xa5, 0x5b, 0xc0, 0xcd, 0xd7,
+-      0xd3, 0xf4, 0xb9, 0x5b, 0xf2, 0x57, 0xe9, 0xce, 0xdd, 0xab, 0xf8, 0x86,
+-      0x3c, 0x0a, 0x7c, 0x7d, 0x08, 0xf8, 0xfa, 0xf0, 0x5d, 0x39, 0x16, 0x7e,
+-      0x4c, 0x64, 0xb8, 0x14, 0x80, 0xff, 0x39, 0x73, 0x07, 0xee, 0xe8, 0x7b,
+-      0x63, 0x8d, 0xbb, 0x6c, 0x63, 0xfa, 0xdc, 0xa3, 0xea, 0xde, 0x7c, 0x03,
+-      0x76, 0xf9, 0x8d, 0x74, 0x29, 0x12, 0x50, 0xf7, 0x73, 0x2e, 0x69, 0x67,
+-      0x8f, 0xbf, 0x6f, 0x84, 0xb5, 0x5c, 0xd4, 0x67, 0x9f, 0xcf, 0xf4, 0x81,
+-      0x0f, 0x68, 0xdf, 0xdd, 0x50, 0xf6, 0xdd, 0xd1, 0x74, 0x50, 0xb6, 0xa2,
+-      0xd4, 0xa9, 0x3f, 0x92, 0x93, 0x2b, 0x91, 0x1e, 0xfa, 0xdf, 0x8b, 0xd5,
+-      0x83, 0xb2, 0xad, 0x64, 0xca, 0x07, 0xd1, 0xd7, 0x93, 0x79, 0xd0, 0xc4,
+-      0x11, 0xf8, 0x8e, 0x17, 0x65, 0x2c, 0x76, 0x11, 0x7b, 0xfd, 0x3c, 0xc6,
+-      0xc0, 0x07, 0x68, 0x15, 0x50, 0x77, 0x1d, 0x7e, 0xc6, 0x6d, 0xe1, 0xf3,
+-      0x98, 0x73, 0x1e, 0x88, 0xce, 0x3a, 0x29, 0xe7, 0x35, 0xf1, 0xe9, 0x8c,
+-      0x34, 0xc5, 0xbb, 0xb6, 0x41, 0xc9, 0xaf, 0xd3, 0x2f, 0xeb, 0x03, 0x1f,
+-      0xfe, 0x08, 0x7a, 0x98, 0x6b, 0x50, 0x2e, 0x70, 0x0f, 0xff, 0x0d, 0xf0,
+-      0xc5, 0x67, 0xbb, 0xbd, 0xfb, 0xa1, 0x7b, 0x29, 0xf7, 0xb5, 0xef, 0x94,
+-      0xc7, 0x18, 0xa5, 0x1b, 0xd2, 0xbc, 0x77, 0xe0, 0xfe, 0xfe, 0x18, 0x76,
+-      0x4e, 0x14, 0x74, 0x80, 0xfa, 0x75, 0xdf, 0xce, 0xf5, 0xed, 0x19, 0x1d,
+-      0xeb, 0xbb, 0xa2, 0x6c, 0x9a, 0x1c, 0xf4, 0xd8, 0x31, 0xf4, 0x65, 0xac,
+-      0xbd, 0xd5, 0x3a, 0x95, 0x86, 0xdf, 0xf1, 0x24, 0x65, 0xd9, 0x7d, 0xe0,
+-      0x69, 0xda, 0x45, 0xd4, 0xb9, 0x62, 0xdd, 0xcc, 0x6c, 0x3b, 0x61, 0xe8,
+-      0xcb, 0x19, 0xd0, 0x5c, 0x0e, 0x74, 0x18, 0x78, 0x60, 0x0a, 0xfa, 0x57,
+-      0xc5, 0x9c, 0x41, 0xeb, 0x5c, 0xf7, 0x83, 0xd6, 0x5f, 0x64, 0xc6, 0xa1,
+-      0x8f, 0x1f, 0x82, 0x3e, 0xe6, 0x7d, 0x74, 0x0e, 0x3a, 0x99, 0xfa, 0xd8,
+-      0x91, 0x3f, 0xdd, 0xcc, 0x41, 0x76, 0xdd, 0xd7, 0x43, 0x5e, 0x9b, 0x6a,
+-      0xf3, 0x54, 0xc1, 0xf0, 0xdc, 0x01, 0x13, 0xfb, 0x28, 0x28, 0xde, 0x2c,
+-      0xaf, 0xd3, 0x0e, 0x01, 0x9f, 0xae, 0x53, 0x46, 0xd0, 0xa6, 0xa4, 0xec,
+-      0x80, 0xac, 0x59, 0xff, 0x00, 0xca, 0x29, 0x94, 0xda, 0x56, 0xbb, 0x52,
+-      0x7d, 0x35, 0xec, 0xdf, 0x23, 0xef, 0xd8, 0x6b, 0x75, 0xec, 0xef, 0x18,
+-      0x73, 0x1b, 0x4a, 0xfd, 0xde, 0x47, 0xb0, 0xc7, 0xe3, 0xa0, 0xc1, 0x19,
+-      0xd0, 0xe0, 0x14, 0xf6, 0x7a, 0xde, 0x1a, 0x39, 0x1c, 0x80, 0x3e, 0x3f,
+-      0x23, 0x85, 0x34, 0x64, 0xee, 0x5a, 0xc9, 0x9a, 0x58, 0x12, 0xf5, 0x9e,
+-      0x4f, 0xf3, 0x4e, 0xfd, 0xbd, 0x2a, 0x3e, 0xb8, 0xbc, 0x19, 0x34, 0x71,
+-      0xc4, 0x20, 0xea, 0xa8, 0xc3, 0x21, 0xb3, 0x1c, 0xcc, 0x55, 0xfd, 0x59,
+-      0xaf, 0xf4, 0x62, 0xbe, 0xea, 0x34, 0xde, 0x19, 0x5b, 0x38, 0x66, 0xdd,
+-      0x59, 0xcf, 0xd8, 0x45, 0xc2, 0xc9, 0xc1, 0x17, 0x0d, 0xba, 0x8c, 0x5f,
+-      0xb8, 0x38, 0x9f, 0xac, 0xe4, 0x47, 0x60, 0x93, 0x29, 0x99, 0xdc, 0x6b,
+-      0x64, 0x32, 0xe4, 0x5d, 0xcd, 0x93, 0xb5, 0x4d, 0xda, 0x4e, 0x9e, 0xf2,
+-      0xa7, 0x29, 0xc7, 0x8a, 0x35, 0xd8, 0x3f, 0xe9, 0xdf, 0xb3, 0xb2, 0x6a,
+-      0xce, 0xb0, 0xca, 0xd5, 0x28, 0xad, 0x89, 0xe5, 0x1c, 0xbe, 0x09, 0xff,
+-      0x35, 0x03, 0x1e, 0xf6, 0x20, 0x37, 0x1d, 0xc8, 0x45, 0xea, 0xb5, 0xaf,
+-      0x76, 0x4b, 0x1f, 0xea, 0x2f, 0xc3, 0xe6, 0x79, 0x92, 0x7c, 0x7b, 0x5d,
+-      0xec, 0xc6, 0x1b, 0xc5, 0x47, 0x18, 0x1b, 0x19, 0x32, 0x77, 0xb3, 0xff,
+-      0x0b, 0xf0, 0xea, 0x35, 0x42, 0xb0, 0xeb, 0xaf, 0xd6, 0xf6, 0xc1, 0x47,
+-      0x3c, 0x66, 0xe5, 0xa3, 0xac, 0x2b, 0xc9, 0x7a, 0x86, 0x76, 0x28, 0x63,
+-      0x24, 0x61, 0xd4, 0xef, 0xf6, 0x49, 0xa9, 0xff, 0x9f, 0x53, 0x77, 0x34,
+-      0x0b, 0x4a, 0xee, 0xfa, 0xf1, 0xe5, 0xe7, 0x24, 0xd9, 0xf4, 0xe3, 0x54,
+-      0x5c, 0x7f, 0xcb, 0x2a, 0x36, 0xff, 0x1c, 0xeb, 0x10, 0x06, 0xee, 0x45,
+-      0xaf, 0x63, 0x2f, 0x4f, 0x98, 0x75, 0x1c, 0x2b, 0x74, 0x38, 0x86, 0xfd,
+-      0xec, 0xef, 0x93, 0xbe, 0x00, 0xe4, 0xd9, 0x28, 0x9e, 0x6f, 0xa1, 0x6e,
+-      0xe7, 0xbd, 0x51, 0x15, 0x2b, 0x70, 0x18, 0xde, 0x33, 0xf4, 0x77, 0x03,
+-      0x32, 0xc7, 0x86, 0xfe, 0x6c, 0x54, 0x3f, 0x8e, 0x12, 0xe3, 0x9e, 0xbc,
+-      0x2e, 0x73, 0xda, 0xdf, 0x86, 0x4d, 0x39, 0xac, 0x74, 0xf0, 0x4c, 0x9a,
+-      0xb1, 0x90, 0x33, 0x90, 0x8f, 0xf7, 0xa3, 0x8e, 0x7e, 0x53, 0x49, 0x9c,
+-      0xf7, 0x14, 0x8c, 0xbf, 0xaf, 0xcf, 0x25, 0xa0, 0xf4, 0xf5, 0x0a, 0xce,
+-      0x83, 0x73, 0x50, 0xdf, 0xfd, 0x5c, 0x3e, 0xd5, 0x11, 0x47, 0xc9, 0xd9,
+-      0xed, 0xb8, 0x41, 0x36, 0x0f, 0x1d, 0xbd, 0x56, 0x25, 0x0f, 0x66, 0x70,
+-      0xde, 0x59, 0xf9, 0xda, 0xe6, 0x3d, 0xc0, 0x75, 0x54, 0x02, 0x4f, 0xb5,
+-      0x40, 0x3f, 0xd4, 0x0d, 0x63, 0x90, 0xc9, 0x8e, 0xb1, 0x25, 0xa2, 0x12,
+-      0x7c, 0x6a, 0x48, 0xba, 0x2f, 0xc4, 0xa4, 0xeb, 0x02, 0xf3, 0x4f, 0x52,
+-      0x71, 0xd8, 0xc5, 0xb4, 0x87, 0x78, 0x0f, 0xc9, 0xfb, 0xc3, 0xb8, 0xbe,
+-      0x8f, 0xe4, 0x5d, 0x24, 0xfa, 0xc1, 0x76, 0xef, 0xba, 0xe4, 0x00, 0x3f,
+-      0x7a, 0xce, 0xdd, 0x63, 0xcb, 0x7a, 0x2c, 0xef, 0x31, 0x63, 0x25, 0x49,
+-      0x99, 0x7b, 0xcc, 0x14, 0xc6, 0xa6, 0x26, 0x5f, 0x6e, 0x8f, 0xe7, 0x58,
+-      0xea, 0xc4, 0x28, 0xf8, 0xfb, 0xad, 0xd2, 0xf8, 0x22, 0xf9, 0xdc, 0xbf,
+-      0xeb, 0x1a, 0x32, 0x77, 0x5f, 0xec, 0x13, 0x37, 0xed, 0x49, 0xd3, 0xee,
+-      0x2a, 0x3d, 0x19, 0x6c, 0xc7, 0x5b, 0x78, 0x2f, 0x96, 0x38, 0xcf, 0xe4,
+-      0x11, 0x7d, 0x47, 0x46, 0x5f, 0x0a, 0xbe, 0xc5, 0x93, 0xb0, 0x31, 0xeb,
+-      0x2c, 0x7b, 0xa4, 0x5c, 0x3f, 0x25, 0xb3, 0xea, 0xf9, 0x43, 0xf2, 0xa8,
+-      0x43, 0xdc, 0x9d, 0x91, 0xf4, 0x84, 0xb6, 0xc7, 0xc4, 0xd6, 0xb8, 0xed,
+-      0x76, 0xcf, 0xc8, 0xd1, 0xb4, 0xd2, 0x21, 0xce, 0x23, 0xc0, 0x71, 0xb1,
+-      0xd9, 0x45, 0x7a, 0x07, 0xec, 0x1e, 0x78, 0x2c, 0x2b, 0x17, 0x37, 0xd1,
+-      0x17, 0x67, 0xf5, 0x08, 0xdf, 0xeb, 0xc0, 0x27, 0x63, 0x16, 0x4f, 0x11,
+-      0x9f, 0xdc, 0x3b, 0x75, 0x28, 0x71, 0x4a, 0x1c, 0x50, 0x2f, 0x33, 0xe6,
+-      0x96, 0x98, 0xbc, 0x2d, 0xf4, 0x9b, 0x89, 0x33, 0xce, 0xe3, 0xef, 0x5b,
+-      0x8f, 0xb3, 0x37, 0x06, 0x85, 0xe6, 0x98, 0x7d, 0xc1, 0x11, 0xfb, 0x12,
+-      0xcb, 0x08, 0x4a, 0xb6, 0x01, 0xa4, 0x8d, 0xa4, 0x69, 0x73, 0x51, 0x07,
+-      0x3b, 0xf2, 0x09, 0xf2, 0x96, 0xce, 0xff, 0x4b, 0x8e, 0x4c, 0xca, 0x95,
+-      0xb5, 0xbb, 0xf9, 0x2b, 0x70, 0x41, 0xdb, 0x25, 0x77, 0xf2, 0xd7, 0xe4,
+-      0x3f, 0x80, 0xbf, 0xb8, 0xc6, 0x19, 0x95, 0xbb, 0xf0, 0xa9, 0x68, 0x22,
+-      0x9e, 0xd5, 0xfe, 0x85, 0x93, 0xb2, 0x47, 0xe2, 0xb4, 0x47, 0x1b, 0x4f,
+-      0x8e, 0xe3, 0xdc, 0x5b, 0xf2, 0x44, 0xda, 0xa7, 0x2f, 0xe6, 0xf8, 0xb5,
+-      0xa4, 0x06, 0xfd, 0x5c, 0x76, 0x2d, 0x59, 0x70, 0xcf, 0x28, 0x7b, 0xf2,
+-      0xc3, 0xd1, 0x96, 0x9c, 0x4e, 0xeb, 0xb1, 0x0b, 0x32, 0x62, 0x68, 0x5c,
+-      0xf9, 0x6b, 0x90, 0xbf, 0x3c, 0x2f, 0xbe, 0xdf, 0x23, 0xe9, 0x81, 0x33,
+-      0x92, 0x9c, 0xd8, 0x22, 0xbe, 0x70, 0x0e, 0x94, 0x3b, 0xbf, 0x36, 0x16,
+-      0xa6, 0x72, 0x9e, 0xf2, 0x15, 0xc2, 0xb4, 0x0f, 0x74, 0x9b, 0x85, 0xbf,
+-      0xb4, 0x13, 0x0f, 0x4b, 0x8d, 0x94, 0x5a, 0x21, 0xac, 0x5d, 0x84, 0x3f,
+-      0xf1, 0xe1, 0xa8, 0x1b, 0x1f, 0xb6, 0x47, 0x62, 0x67, 0xa5, 0xa6, 0x60,
+-      0xfd, 0x44, 0x5a, 0xd3, 0xcb, 0x62, 0x66, 0xaf, 0x18, 0x55, 0x67, 0x8c,
+-      0x9a, 0x73, 0x6d, 0x59, 0x9f, 0x6c, 0xea, 0x78, 0xd4, 0x4e, 0x9c, 0x7a,
+-      0x47, 0xe6, 0x04, 0x8d, 0x2c, 0x28, 0xd7, 0xde, 0x25, 0xbe, 0xcc, 0xa9,
+-      0x65, 0x70, 0x56, 0xcb, 0x3c, 0xa3, 0xb8, 0xb9, 0x47, 0x0a, 0x77, 0xd8,
+-      0xca, 0x21, 0xe6, 0xfd, 0xc5, 0xb3, 0xf6, 0x32, 0x64, 0xc3, 0x93, 0x12,
+-      0x72, 0xfd, 0xb9, 0x98, 0xd3, 0x19, 0x33, 0xf7, 0x11, 0xfb, 0x19, 0xb7,
+-      0x42, 0x9f, 0x07, 0xd1, 0x7e, 0x3f, 0xfa, 0x51, 0x57, 0xf2, 0x1e, 0x80,
+-      0x7a, 0x93, 0xb1, 0xf6, 0x01, 0xf4, 0xeb, 0x91, 0x7c, 0x7d, 0xbf, 0xa9,
+-      0xf3, 0xe7, 0x38, 0xdc, 0xd1, 0xdf, 0xaf, 0xd3, 0xf7, 0x07, 0x59, 0x1b,
+-      0x32, 0x7e, 0x99, 0x7d, 0xe3, 0xed, 0x3b, 0x10, 0xbb, 0xf1, 0xa0, 0xa3,
+-      0xc7, 0xb3, 0x1f, 0x65, 0x3e, 0x74, 0x4b, 0x15, 0xfa, 0xa6, 0x3a, 0xc5,
+-      0xbb, 0x40, 0x63, 0x57, 0xcc, 0x9a, 0x7c, 0x16, 0xda, 0x17, 0xaf, 0x19,
+-      0x7d, 0xbb, 0x93, 0x8b, 0x7a, 0x24, 0xe3, 0xe7, 0xf5, 0x30, 0x17, 0x91,
+-      0xeb, 0xf2, 0x3c, 0x40, 0x53, 0x9b, 0xda, 0x96, 0xb6, 0x33, 0x5d, 0xbc,
+-      0x6b, 0x83, 0x7e, 0xd7, 0xfa, 0xbf, 0x01, 0xfd, 0xbf, 0xb1, 0x02, 0x9d,
+-      0xdf, 0x47, 0xdd, 0xaf, 0xf3, 0x4f, 0xec, 0x76, 0xbe, 0x8f, 0x7f, 0x8f,
+-      0xbc, 0xa5, 0xee, 0xf1, 0x7a, 0x3c, 0xca, 0xf4, 0x8c, 0xfc, 0x39, 0x6c,
+-      0xad, 0x67, 0x36, 0x27, 0xb1, 0x5e, 0x1a, 0x7e, 0xdd, 0x38, 0xfc, 0xba,
+-      0x51, 0xf8, 0x75, 0x2e, 0x74, 0xe1, 0x90, 0xca, 0x27, 0xa3, 0xde, 0x9f,
+-      0x38, 0x24, 0xd6, 0xd7, 0x32, 0x62, 0x1d, 0xbc, 0x00, 0x1b, 0x61, 0xe9,
+-      0x25, 0xd0, 0x7f, 0xe2, 0x79, 0x11, 0xf2, 0x04, 0xf9, 0xef, 0x31, 0xc9,
+-      0xc6, 0x86, 0xe4, 0xf3, 0x9b, 0x6c, 0x23, 0x3d, 0x65, 0xe5, 0x15, 0xf7,
+-      0x25, 0xc5, 0x67, 0x17, 0x6b, 0xd7, 0x25, 0xf4, 0x84, 0x96, 0xb5, 0x3f,
+-      0x80, 0x3d, 0xd5, 0x48, 0x6b, 0xda, 0xbb, 0x2d, 0xa4, 0x3d, 0xe8, 0xa7,
+-      0x35, 0xca, 0xd8, 0x9b, 0x12, 0xbd, 0xf0, 0x92, 0xbc, 0xf9, 0x82, 0xab,
+-      0xe2, 0x12, 0x6b, 0x4f, 0x2a, 0xdd, 0x07, 0xb9, 0x16, 0x95, 0xf5, 0xcd,
+-      0xdf, 0x91, 0x4f, 0x39, 0x89, 0x2b, 0x94, 0x99, 0x94, 0x5d, 0x5a, 0xa7,
+-      0x41, 0xc6, 0x56, 0x12, 0xa5, 0x32, 0x6c, 0xef, 0x2b, 0xf6, 0x98, 0x64,
+-      0x83, 0xa5, 0x56, 0x3f, 0xfd, 0x82, 0x9a, 0xeb, 0x24, 0x6d, 0x9e, 0xef,
+-      0xbd, 0xb0, 0xad, 0x13, 0x75, 0x25, 0xa3, 0xa8, 0x27, 0x33, 0xd4, 0x9b,
+-      0xd4, 0x7d, 0xd4, 0x3f, 0x8c, 0x97, 0xe3, 0x79, 0x8d, 0xba, 0xe9, 0xef,
+-      0xd4, 0x9d, 0x67, 0x71, 0xc6, 0x91, 0xfa, 0x1a, 0xe5, 0x13, 0xf4, 0xfc,
+-      0x93, 0xb4, 0x73, 0x45, 0xd1, 0x3f, 0xed, 0xdc, 0x47, 0xc5, 0xb7, 0x71,
+-      0xd9, 0xb6, 0xdb, 0xc6, 0xfd, 0x83, 0x7d, 0xd2, 0x1b, 0x05, 0x7e, 0xc8,
+-      0xff, 0x3b, 0x36, 0x60, 0x2e, 0x73, 0x13, 0xb6, 0x26, 0xf7, 0x61, 0xc9,
+-      0xa0, 0x7b, 0x1d, 0x74, 0xc4, 0xb5, 0x6f, 0xb6, 0x3e, 0x1c, 0xe5, 0x1e,
+-      0x2c, 0x65, 0x23, 0x6c, 0x0f, 0xfe, 0xa6, 0x3b, 0x0a, 0xca, 0x88, 0x7d,
+-      0xb0, 0xcd, 0x6d, 0x43, 0xb3, 0x9f, 0x34, 0xbe, 0x04, 0xf8, 0x79, 0x95,
+-      0x7b, 0x28, 0xf3, 0x4e, 0x04, 0x36, 0xd7, 0x22, 0x63, 0x52, 0x6a, 0xdd,
+-      0xf7, 0x67, 0x22, 0x92, 0xbc, 0xd0, 0x25, 0xa9, 0xa7, 0xec, 0x41, 0x9d,
+-      0xb7, 0xf8, 0x30, 0x74, 0xcf, 0x41, 0xb4, 0x1f, 0x90, 0xb2, 0x13, 0x85,
+-      0x3f, 0x33, 0x2a, 0xe5, 0xd1, 0x30, 0x78, 0xe6, 0x01, 0xde, 0x75, 0x28,
+-      0x38, 0xca, 0xce, 0x30, 0xca, 0x6e, 0x94, 0xf7, 0x48, 0xf9, 0xc9, 0x4b,
+-      0xfb, 0xb4, 0x2d, 0xbb, 0xfb, 0xfd, 0x9f, 0x76, 0xab, 0xd8, 0xb9, 0xf5,
+-      0x8e, 0x88, 0xb9, 0x47, 0xff, 0x2d, 0x60, 0xf7, 0xfb, 0x12, 0x9e, 0x90,
+-      0xb8, 0x4f, 0x44, 0x64, 0x18, 0xb2, 0x77, 0x04, 0x7a, 0xeb, 0xe0, 0x85,
+-      0x21, 0x19, 0xbd, 0x10, 0x97, 0xfb, 0x2e, 0xf8, 0xf6, 0xc0, 0xf2, 0x74,
+-      0xca, 0xc4, 0x71, 0xdd, 0xdf, 0x32, 0x8e, 0x7b, 0x9f, 0x9a, 0x1f, 0x30,
+-      0xae, 0x41, 0x1e, 0x46, 0x3f, 0xa7, 0xec, 0x06, 0x8d, 0xfb, 0x1f, 0xc9,
+-      0x91, 0x95, 0x90, 0x1c, 0x55, 0xbc, 0xe8, 0xdb, 0xf0, 0xff, 0x13, 0xfb,
+-      0x48, 0x80, 0x47, 0x4e, 0x18, 0xbf, 0xb3, 0x17, 0x78, 0x25, 0x0e, 0xa1,
+-      0xeb, 0xe0, 0x8b, 0x32, 0x3f, 0xb5, 0x98, 0xee, 0x1c, 0xcf, 0xb1, 0x3f,
+-      0xc5, 0x98, 0x2c, 0x6c, 0x0b, 0xb6, 0xcb, 0x60, 0x40, 0xf6, 0x6a, 0x7f,
+-      0x1f, 0xda, 0x29, 0x73, 0x8e, 0x42, 0xe6, 0xec, 0x6e, 0xcf, 0xa1, 0x8d,
+-      0xeb, 0xdf, 0x83, 0x75, 0xc9, 0x8f, 0x5c, 0xd7, 0xc7, 0x09, 0xcf, 0x75,
+-      0x10, 0xfe, 0x07, 0xcf, 0xb5, 0x4b, 0x0a, 0x0e, 0x73, 0x37, 0x59, 0xf7,
+-      0x16, 0x73, 0xd6, 0x13, 0xe6, 0xac, 0x05, 0xb6, 0x31, 0xed, 0x2d, 0x9d,
+-      0xaf, 0x50, 0x88, 0x26, 0x4a, 0x22, 0x71, 0x15, 0xbf, 0x5b, 0xaf, 0xf8,
+-      0xf6, 0x49, 0xb6, 0x9f, 0xf7, 0x10, 0x8b, 0x69, 0x15, 0x5b, 0x8b, 0x07,
+-      0x3c, 0xda, 0x37, 0xe9, 0x30, 0xf3, 0x92, 0x1b, 0x2b, 0xbc, 0x93, 0x0c,
+-      0xe0, 0x07, 0x3c, 0x07, 0x2d, 0x71, 0x5c, 0xd6, 0x95, 0xb4, 0x6e, 0x9b,
+-      0x01, 0xff, 0xda, 0xaa, 0x4f, 0x3c, 0x97, 0x1e, 0x34, 0xef, 0x31, 0x59,
+-      0xab, 0xbc, 0x63, 0xc8, 0xf6, 0xfe, 0xf6, 0x9e, 0x5c, 0xa6, 0x9f, 0xf7,
+-      0x49, 0xa8, 0x23, 0x9f, 0xbc, 0xa4, 0x72, 0x15, 0xb5, 0xef, 0x10, 0xe4,
+-      0x3d, 0x24, 0xf6, 0xf9, 0x53, 0xd0, 0xf5, 0xee, 0x3d, 0x77, 0x99, 0x3d,
+-      0x73, 0xbf, 0xc4, 0x37, 0xc7, 0xfb, 0x7a, 0x8e, 0x38, 0x0f, 0x77, 0xf8,
+-      0x1b, 0x91, 0x81, 0x9d, 0xfb, 0x73, 0xca, 0x42, 0xca, 0xbf, 0x49, 0x95,
+-      0xef, 0x72, 0xcb, 0x86, 0x1c, 0xaa, 0x42, 0x2e, 0x55, 0x21, 0x8b, 0xaa,
+-      0x90, 0x45, 0xb0, 0x41, 0x9e, 0x85, 0x5c, 0x7d, 0x06, 0xbe, 0xda, 0xd7,
+-      0xab, 0xbe, 0xfd, 0x9e, 0x85, 0x1c, 0x53, 0x36, 0x1d, 0xed, 0x9f, 0x9a,
+-      0xed, 0x75, 0xff, 0xd6, 0xf9, 0x50, 0x01, 0xcf, 0x1f, 0xd7, 0x2d, 0x45,
+-      0x35, 0x26, 0x2e, 0xf3, 0xcd, 0xbd, 0xfa, 0x72, 0x7f, 0xa1, 0x8e, 0xfd,
+-      0x9a, 0xbb, 0x7e, 0x15, 0x8b, 0xa0, 0x0c, 0xfe, 0x4d, 0x3c, 0xd0, 0x99,
+-      0xa7, 0xc9, 0x33, 0x56, 0x39, 0x42, 0x38, 0x53, 0xe2, 0x9d, 0x76, 0x61,
+-      0x59, 0x16, 0x26, 0x17, 0xa5, 0x3c, 0x69, 0xc9, 0xdc, 0x38, 0xce, 0x68,
+-      0x7c, 0x18, 0x3a, 0x32, 0x0d, 0x5d, 0xbb, 0x80, 0x79, 0xc8, 0x7f, 0x0f,
+-      0xe2, 0x5c, 0x1c, 0x73, 0x27, 0xfe, 0xa5, 0xe9, 0x5c, 0x4d, 0xac, 0x6b,
+-      0x2a, 0x47, 0x7c, 0x79, 0xfa, 0xd5, 0x95, 0x87, 0x61, 0x3f, 0x4d, 0xc8,
+-      0xd5, 0xc9, 0x87, 0x65, 0xfb, 0x8e, 0xf1, 0x38, 0x07, 0xc8, 0xe1, 0xcf,
+-      0x6f, 0xf2, 0x1e, 0xb4, 0x4b, 0x66, 0xa3, 0x8c, 0x81, 0xc1, 0xc6, 0x71,
+-      0xfb, 0x65, 0x5b, 0xf9, 0xa1, 0x07, 0xe4, 0xb6, 0xa2, 0x2d, 0xd6, 0x85,
+-      0x50, 0xa7, 0xed, 0xd1, 0xb5, 0x8a, 0x6f, 0x5b, 0x28, 0x1c, 0x99, 0x98,
+-      0x1f, 0xf5, 0x0d, 0xe3, 0x49, 0x8c, 0x2f, 0xad, 0x45, 0x76, 0x64, 0x01,
+-      0x4b, 0xff, 0x5c, 0x3b, 0xfd, 0xe3, 0xbf, 0x8e, 0xe8, 0x6f, 0x0b, 0xba,
+-      0xa4, 0x1c, 0x2d, 0xb5, 0xca, 0x6e, 0xd0, 0xba, 0xda, 0xce, 0x69, 0xf5,
+-      0xdb, 0x48, 0xcb, 0x36, 0x60, 0x25, 0x1d, 0x24, 0x55, 0xee, 0xce, 0x77,
+-      0xaa, 0x03, 0xfb, 0xf4, 0x37, 0x0a, 0x01, 0x8c, 0xe3, 0xfb, 0x89, 0x88,
+-      0x7e, 0xf7, 0xef, 0xdd, 0xdf, 0x86, 0xbe, 0x31, 0x25, 0xaf, 0xd6, 0x6a,
+-      0x01, 0xf0, 0xf0, 0x20, 0x9e, 0x5f, 0x44, 0x9f, 0x30, 0xce, 0x86, 0xb1,
+-      0xa4, 0xb7, 0xa8, 0xfc, 0x9b, 0x80, 0xeb, 0xe7, 0xf5, 0x52, 0x77, 0xff,
+-      0x67, 0xd5, 0xfe, 0xf4, 0x4a, 0x37, 0xf3, 0x55, 0x51, 0x52, 0xaf, 0xff,
+-      0x0a, 0xbe, 0x56, 0x48, 0xf2, 0x35, 0x17, 0xb6, 0x78, 0x88, 0xf4, 0x8b,
+-      0xfa, 0x7b, 0xa1, 0xa3, 0x04, 0xfc, 0xd4, 0x05, 0xbd, 0xa9, 0x70, 0x0d,
+-      0x4a, 0xa2, 0x4f, 0xef, 0xe7, 0x99, 0x6a, 0x38, 0x42, 0xde, 0xf7, 0x98,
+-      0x6f, 0x10, 0x0e, 0x78, 0x2f, 0x4d, 0xcf, 0x55, 0x68, 0x2b, 0xb5, 0x5a,
+-      0xd0, 0x65, 0xd8, 0xc9, 0xcf, 0x94, 0x5f, 0xb1, 0x2d, 0xda, 0x57, 0x5b,
+-      0x50, 0xf9, 0x96, 0x37, 0xa7, 0x35, 0x8d, 0x74, 0xde, 0x9f, 0xbc, 0xd1,
+-      0xdd, 0x49, 0x58, 0xb6, 0xd3, 0x3d, 0x86, 0x2f, 0xc2, 0xc1, 0x62, 0x25,
+-      0x12, 0x9c, 0x53, 0xf7, 0x5b, 0x5b, 0x26, 0x1f, 0xf3, 0xda, 0x74, 0xaa,
+-      0x19, 0x56, 0xb9, 0x00, 0xbc, 0x4b, 0xc8, 0x57, 0x78, 0x97, 0xa2, 0xdb,
+-      0x53, 0xa6, 0x3d, 0xd9, 0x54, 0x6d, 0x2a, 0xde, 0xc5, 0x18, 0x57, 0x37,
+-      0xca, 0xdb, 0x15, 0xca, 0x07, 0xcc, 0xaf, 0x65, 0x09, 0x60, 0x7f, 0x71,
+-      0x7a, 0x6e, 0x85, 0xf0, 0x7d, 0x7f, 0x3a, 0xb7, 0xc2, 0x1c, 0xc8, 0xff,
+-      0x34, 0x7d, 0x63, 0xc5, 0x92, 0x0d, 0x37, 0xa1, 0xe2, 0x57, 0xeb, 0x8c,
+-      0xb1, 0x72, 0x9c, 0x9a, 0xf3, 0x45, 0x23, 0x93, 0xbf, 0x37, 0x3d, 0xbc,
+-      0x1e, 0x90, 0x73, 0x66, 0x0e, 0xbe, 0xc7, 0xd7, 0xef, 0xa0, 0x6b, 0xd0,
+-      0xca, 0x15, 0xd0, 0x4a, 0x2f, 0x6c, 0x09, 0xd2, 0x37, 0x7d, 0xb2, 0x5e,
+-      0xc8, 0x01, 0xae, 0xf3, 0x8c, 0x5a, 0x27, 0x80, 0x75, 0xe6, 0x54, 0xce,
+-      0x78, 0x80, 0x79, 0xb7, 0xb0, 0x35, 0x61, 0x13, 0xba, 0x8c, 0x59, 0xdb,
+-      0xd8, 0xf3, 0x28, 0xf4, 0x12, 0xf3, 0x3f, 0xfe, 0x7b, 0x64, 0x27, 0x6f,
+-      0xfc, 0x39, 0x33, 0xee, 0x9b, 0x18, 0xc7, 0x33, 0x51, 0xf9, 0xe6, 0x6f,
+-      0xb6, 0x65, 0x58, 0xd9, 0x90, 0x3a, 0x07, 0x89, 0x30, 0xd4, 0xb1, 0x57,
+-      0xea, 0xe2, 0x2e, 0xc9, 0xab, 0x7d, 0x7d, 0x53, 0x8d, 0xb3, 0xbc, 0x6f,
+-      0x00, 0x76, 0xda, 0x25, 0x98, 0xbb, 0xaa, 0xe3, 0x6d, 0x79, 0xc5, 0xd3,
+-      0xe0, 0x91, 0x49, 0x3f, 0x57, 0x4f, 0x8f, 0xf3, 0xfb, 0x27, 0xd7, 0x8f,
+-      0x98, 0x9c, 0x8e, 0xbf, 0x6f, 0x65, 0x8f, 0xf7, 0x2a, 0x1b, 0x6c, 0xe7,
+-      0x9b, 0x08, 0x7f, 0x8c, 0xdf, 0xc7, 0xcf, 0x31, 0x7e, 0x74, 0xff, 0x0e,
+-      0xcc, 0x5b, 0xe6, 0xcc, 0x39, 0x8e, 0xb1, 0x49, 0x95, 0xaf, 0xcb, 0xba,
+-      0xe0, 0x7c, 0x86, 0x73, 0x74, 0xde, 0xf7, 0x8c, 0x83, 0x47, 0xb5, 0xcd,
+-      0x57, 0x82, 0x9d, 0x55, 0x06, 0xbf, 0x04, 0x3c, 0xca, 0xf1, 0x61, 0x13,
+-      0x57, 0x7b, 0xa3, 0x38, 0x1f, 0xef, 0x12, 0xc7, 0x21, 0x7b, 0xfc, 0xf1,
+-      0x3c, 0xc7, 0x6b, 0xd3, 0x37, 0x2a, 0xae, 0x9c, 0xad, 0xea, 0x7c, 0x47,
+-      0x8d, 0x07, 0xc6, 0x6e, 0x78, 0xb6, 0x71, 0x99, 0x73, 0xa9, 0x67, 0xe3,
+-      0xf2, 0x5d, 0xd7, 0x8f, 0xad, 0xf1, 0x7e, 0x0a, 0xfd, 0x61, 0xeb, 0x2d,
+-      0x6c, 0x72, 0xff, 0xdf, 0xc4, 0xfe, 0xe9, 0x53, 0x68, 0x5a, 0x3a, 0x08,
+-      0xb9, 0xf5, 0x1f, 0x82, 0xf0, 0x19, 0xa0, 0xbb, 0x6f, 0x05, 0x3b, 0xf7,
+-      0xe7, 0xeb, 0x6b, 0x4d, 0x97, 0x41, 0xd0, 0xc8, 0x62, 0x1b, 0xef, 0x96,
+-      0x04, 0xde, 0x39, 0x02, 0x1d, 0x64, 0x49, 0x61, 0xdc, 0x8d, 0x2d, 0xf0,
+-      0x6e, 0xc1, 0x19, 0x73, 0x1c, 0x95, 0xc7, 0x16, 0x07, 0xbc, 0x7c, 0xe6,
+-      0xb7, 0x02, 0xcc, 0x39, 0x8b, 0xab, 0x5c, 0xdd, 0x6c, 0xd4, 0x05, 0xbc,
+-      0x8e, 0xb2, 0x4f, 0xb4, 0x5e, 0xfe, 0x97, 0xfb, 0x29, 0x6b, 0xfa, 0x5d,
+-      0xff, 0xec, 0x39, 0xf7, 0x8b, 0x98, 0x3b, 0x60, 0xda, 0x7d, 0x1a, 0x09,
+-      0x30, 0xe5, 0x4d, 0x76, 0xbe, 0x01, 0xf1, 0xe3, 0x7c, 0xec, 0xff, 0x2d,
+-      0x05, 0xcb, 0x1c, 0xf4, 0xd0, 0xbc, 0xda, 0xcf, 0x0b, 0xa0, 0x05, 0xca,
+-      0x15, 0x9f, 0x7e, 0x5f, 0x00, 0xfd, 0xee, 0x63, 0x0a, 0xdf, 0x1e, 0xb4,
+-      0xe6, 0xd3, 0x18, 0xe9, 0x8b, 0xb4, 0xf5, 0x8a, 0xe2, 0xb9, 0x52, 0xfb,
+-      0xdc, 0x29, 0xb3, 0x12, 0x4e, 0xdc, 0xf6, 0xcf, 0x9d, 0xcf, 0x7b, 0xe5,
+-      0xb8, 0xfa, 0xfc, 0x91, 0xf9, 0x07, 0x9c, 0x6d, 0xda, 0x9c, 0x6d, 0xa6,
+-      0xe3, 0x9b, 0x04, 0x7f, 0x3e, 0xfa, 0xfb, 0xd4, 0xaf, 0xbc, 0x0b, 0xe2,
+-      0xf7, 0x12, 0xca, 0x44, 0x90, 0x72, 0x9a, 0x7c, 0x94, 0x8b, 0xf3, 0x3e,
+-      0xe5, 0xa4, 0x04, 0xfa, 0x60, 0xb7, 0x8c, 0x86, 0xc4, 0xff, 0x2e, 0xa9,
+-      0x4b, 0xb6, 0x9c, 0x56, 0xeb, 0x06, 0xef, 0x8d, 0x2b, 0x41, 0xd9, 0x50,
+-      0x77, 0x9f, 0xe0, 0xd1, 0xde, 0xa0, 0x2c, 0xba, 0x6d, 0x3d, 0x27, 0x75,
+-      0xf4, 0x59, 0x43, 0xdb, 0xb9, 0x36, 0x6c, 0xd4, 0x07, 0xb0, 0x21, 0xdd,
+-      0xbf, 0x6f, 0x15, 0xa3, 0x77, 0xf4, 0x35, 0x32, 0x96, 0xb1, 0x47, 0xc6,
+-      0xa7, 0x1d, 0xc9, 0xaf, 0x0f, 0xe0, 0x07, 0x19, 0xaf, 0xe4, 0x02, 0x63,
+-      0x91, 0x8c, 0xe7, 0x96, 0xe0, 0x9f, 0x6a, 0x3f, 0x9f, 0xf6, 0xf6, 0x95,
+-      0xcd, 0x44, 0xa9, 0x24, 0x6e, 0xfc, 0x91, 0xf6, 0x77, 0x3c, 0x7d, 0xa5,
+-      0xb0, 0xd7, 0x19, 0xf3, 0x8d, 0xab, 0xfc, 0xd9, 0x1e, 0x2f, 0x11, 0x3b,
+-      0x05, 0xdf, 0xf5, 0xeb, 0x69, 0xc6, 0x7a, 0xef, 0x23, 0xbe, 0xbf, 0xc4,
+-      0x4d, 0xda, 0x23, 0xe3, 0xe2, 0x5e, 0x72, 0x47, 0x1f, 0x11, 0xfa, 0xa7,
+-      0x89, 0xf8, 0x14, 0xf1, 0xd6, 0xfe, 0xbe, 0x20, 0x68, 0xec, 0xa5, 0x71,
+-      0x19, 0xbe, 0xf4, 0x23, 0x15, 0x63, 0xff, 0x70, 0x7a, 0x37, 0x6d, 0xa8,
+-      0x58, 0xf1, 0x78, 0xbf, 0x0c, 0x8f, 0xae, 0x89, 0x40, 0x5b, 0xf0, 0x7b,
+-      0x03, 0x0b, 0x3e, 0xaa, 0x7a, 0x87, 0xbd, 0x1e, 0x57, 0xdf, 0x5c, 0x65,
+-      0x55, 0xde, 0x23, 0x63, 0xc9, 0x3c, 0xd3, 0x88, 0xca, 0x85, 0x7b, 0x16,
+-      0x67, 0x5b, 0x68, 0xf2, 0x7c, 0x19, 0x57, 0x66, 0xdc, 0x98, 0xb1, 0x65,
+-      0xc6, 0x88, 0xf5, 0xf7, 0x53, 0x47, 0x9a, 0x7b, 0xc5, 0x91, 0x89, 0x8b,
+-      0x51, 0xf3, 0x4d, 0x9a, 0x58, 0xdb, 0xd0, 0xbb, 0xf9, 0x9a, 0xa3, 0xee,
+-      0xfd, 0x8a, 0x4e, 0xbf, 0x9c, 0x1c, 0xed, 0x06, 0xce, 0x07, 0x54, 0x3e,
+-      0xa4, 0xed, 0xbe, 0x07, 0x7e, 0x25, 0xfd, 0x38, 0xea, 0x5b, 0x1f, 0xcf,
+-      0x87, 0x50, 0xf7, 0x0b, 0xe0, 0x9e, 0x75, 0xf0, 0x39, 0x95, 0xee, 0xfd,
+-      0xb4, 0x6c, 0x57, 0x98, 0x9f, 0x5d, 0x3f, 0x90, 0x53, 0xe7, 0xc1, 0x98,
+-      0x8d, 0x2f, 0x9b, 0xfc, 0x5c, 0x35, 0xfa, 0xcc, 0x8e, 0xb9, 0xab, 0x66,
+-      0xcc, 0x66, 0x40, 0x8a, 0xeb, 0x94, 0x3f, 0x96, 0x5a, 0xeb, 0x56, 0xe0,
+-      0xad, 0x52, 0xaa, 0xef, 0x75, 0xef, 0xde, 0x6a, 0x3d, 0x93, 0x56, 0xbe,
+-      0xec, 0xf9, 0x92, 0x39, 0x63, 0xfd, 0x1d, 0x64, 0x70, 0x27, 0x7f, 0x38,
+-      0xaa, 0xe3, 0x09, 0xd9, 0x81, 0x5e, 0xfa, 0x0f, 0x7d, 0x1a, 0xbf, 0xf4,
+-      0x7b, 0x7f, 0x65, 0x6c, 0x51, 0xfa, 0xbc, 0x03, 0x4a, 0x4f, 0xdb, 0x0d,
+-      0x9f, 0x4e, 0x98, 0x73, 0x43, 0x7f, 0xf8, 0xa0, 0x64, 0xeb, 0x90, 0x9b,
+-      0x83, 0x7c, 0x3f, 0x6b, 0xc6, 0xf2, 0xb9, 0x25, 0x47, 0x27, 0x76, 0xdf,
+-      0xa7, 0x4f, 0x6a, 0x3f, 0xbb, 0xd7, 0xbf, 0x53, 0xf7, 0x73, 0x4d, 0x7d,
+-      0x78, 0x15, 0x9c, 0xa0, 0x27, 0x1f, 0x06, 0xbd, 0xd6, 0x11, 0xc0, 0xcb,
+-      0x18, 0xe4, 0x80, 0xcb, 0x5c, 0x9d, 0x80, 0x4c, 0x0c, 0x24, 0x98, 0xc3,
+-      0xa7, 0xe0, 0x69, 0xd4, 0x43, 0x68, 0xf3, 0xe1, 0xd4, 0xfe, 0x79, 0xa3,
+-      0xce, 0xf6, 0x38, 0xd6, 0xea, 0x96, 0x89, 0x41, 0xe2, 0x79, 0x37, 0x1c,
+-      0x03, 0x81, 0xbd, 0x73, 0xd4, 0x1e, 0xec, 0x80, 0xef, 0xee, 0xef, 0x47,
+-      0x73, 0xf0, 0xc3, 0x72, 0x2b, 0x8c, 0x15, 0x10, 0xc6, 0x01, 0xc8, 0x39,
+-      0xec, 0x31, 0xed, 0xe7, 0x0e, 0xfb, 0x78, 0xf1, 0x63, 0x0c, 0x21, 0x45,
+-      0x17, 0x73, 0x19, 0xee, 0x25, 0x64, 0x62, 0x0e, 0x84, 0x2b, 0x61, 0xf2,
+-      0x0f, 0x09, 0x9f, 0x7d, 0x40, 0x9f, 0xff, 0xfd, 0x66, 0xbf, 0x7e, 0xce,
+-      0x22, 0xe7, 0xba, 0x17, 0xe3, 0xbf, 0xd2, 0xc2, 0x5a, 0x34, 0xe8, 0xc0,
+-      0xff, 0xbe, 0xaf, 0x7f, 0xaf, 0x9e, 0xab, 0xd7, 0xff, 0xa6, 0x2f, 0x66,
+-      0xbe, 0xe3, 0x23, 0x9c, 0xe4, 0x2f, 0x1f, 0x87, 0x9c, 0x63, 0xc0, 0xdc,
+-      0x23, 0x10, 0x86, 0x9e, 0x5d, 0x30, 0x24, 0xd2, 0x77, 0xca, 0xb8, 0x43,
+-      0x1d, 0x7b, 0x27, 0xad, 0xf5, 0xc9, 0x42, 0xad, 0x57, 0xca, 0x35, 0xe6,
+-      0x53, 0xf3, 0xfb, 0x32, 0xda, 0x59, 0xe4, 0x4b, 0x95, 0x37, 0x69, 0xf2,
+-      0x15, 0x7d, 0xfe, 0xec, 0x43, 0x3f, 0xea, 0x10, 0x94, 0x75, 0x2d, 0x9f,
+-      0xea, 0x72, 0x77, 0xce, 0xe2, 0x7c, 0x3b, 0x67, 0x51, 0xe7, 0x25, 0x15,
+-      0xdb, 0x79, 0x22, 0xcc, 0x89, 0xeb, 0xcc, 0x41, 0x2a, 0xc9, 0xa3, 0x87,
+-      0x7b, 0x24, 0xb9, 0xdc, 0x6b, 0x68, 0xf4, 0x3d, 0x66, 0x1d, 0xac, 0xb7,
+-      0x34, 0x29, 0xc9, 0xa5, 0x3f, 0x86, 0x6f, 0xaf, 0xf2, 0x22, 0x3b, 0xf2,
+-      0xdb, 0x87, 0xcd, 0xb7, 0x48, 0x59, 0x8b, 0xf9, 0x28, 0xf9, 0x25, 0x9c,
+-      0xd7, 0xe1, 0xc4, 0x68, 0xdc, 0xe6, 0xb7, 0xb8, 0x27, 0x24, 0xb9, 0x3a,
+-      0xa9, 0xbf, 0x89, 0x4b, 0xf3, 0x46, 0x3e, 0xa1, 0xec, 0xe9, 0xd4, 0x65,
+-      0x3d, 0x9f, 0xbb, 0xc4, 0xf6, 0x14, 0x6c, 0x47, 0xb6, 0xe7, 0x63, 0x01,
+-      0x75, 0x6b, 0x7f, 0x3f, 0xe8, 0xa9, 0xcb, 0xd8, 0x03, 0xcc, 0xe9, 0xe4,
+-      0x78, 0xda, 0x1e, 0xa7, 0x71, 0x66, 0xf9, 0xb8, 0x2d, 0x1c, 0xa3, 0xe6,
+-      0xc3, 0xb3, 0x7f, 0x47, 0x44, 0x5c, 0x8f, 0xcb, 0x7a, 0xd3, 0x05, 0x4f,
+-      0xe8, 0x9c, 0xf8, 0x62, 0xdd, 0xcf, 0xe5, 0x7c, 0xb4, 0x9d, 0xcb, 0x49,
+-      0x18, 0x0b, 0x95, 0xdd, 0xb4, 0x77, 0xc8, 0xe4, 0x54, 0xf6, 0xa8, 0xfb,
+-      0xd9, 0x0e, 0xf9, 0x67, 0xfa, 0x3f, 0x73, 0x80, 0x77, 0xf7, 0x22, 0x6c,
+-      0x1f, 0x34, 0xed, 0xb0, 0x8f, 0xa2, 0x51, 0xc5, 0x07, 0xc9, 0x86, 0xdf,
+-      0xef, 0xfa, 0x01, 0x9d, 0x0b, 0x4a, 0x3c, 0x79, 0x06, 0xe6, 0x09, 0xf8,
+-      0xb1, 0xac, 0x3b, 0x88, 0xb1, 0x3c, 0x27, 0x94, 0x8d, 0x83, 0x2a, 0xd7,
+-      0x30, 0xe0, 0x4d, 0x99, 0x7b, 0xc1, 0x41, 0xb5, 0x96, 0xe3, 0x71, 0x7e,
+-      0x5f, 0x36, 0xf4, 0x74, 0xac, 0xbf, 0x1b, 0x5e, 0xc6, 0xe0, 0xfc, 0xdc,
+-      0x51, 0xb6, 0xf3, 0x7d, 0x77, 0x1f, 0x3f, 0x4f, 0x34, 0x6b, 0x05, 0xdb,
+-      0x39, 0xf6, 0xc4, 0x25, 0xef, 0x96, 0x51, 0x5e, 0xf6, 0x00, 0x23, 0x9f,
+-      0x51, 0x9a, 0x6f, 0x07, 0x82, 0x4b, 0xfc, 0xed, 0x9e, 0x27, 0x88, 0xb9,
+-      0x7d, 0x9e, 0xdd, 0x3b, 0xa7, 0xb4, 0xcb, 0x3b, 0x6f, 0x6d, 0x57, 0x98,
+-      0x27, 0x51, 0x92, 0x93, 0x99, 0x3e, 0x99, 0xab, 0xd9, 0xfc, 0xc6, 0x93,
+-      0x31, 0x7a, 0xde, 0x83, 0xcb, 0xbc, 0x92, 0x71, 0x23, 0xc6, 0xe7, 0xee,
+-      0x81, 0x6f, 0x4e, 0x7a, 0x1e, 0x91, 0xf5, 0xfa, 0x4c, 0x47, 0xfe, 0x6d,
+-      0x97, 0xa1, 0xb3, 0x7f, 0x1d, 0x92, 0xde, 0x12, 0x7c, 0x32, 0x9f, 0xa7,
+-      0x47, 0xa4, 0x50, 0xef, 0xbc, 0x3b, 0x63, 0xae, 0x4f, 0xe7, 0x37, 0xb4,
+-      0x4a, 0x0f, 0xd6, 0x4a, 0xb4, 0xab, 0xa2, 0x8c, 0x4b, 0xb0, 0xdf, 0x7e,
+-      0xa3, 0x6f, 0xe1, 0x08, 0xf5, 0xbe, 0xc5, 0x12, 0x97, 0xb0, 0x41, 0x47,
+-      0xa8, 0x75, 0x52, 0x72, 0x34, 0x5a, 0x82, 0x8f, 0x3a, 0x62, 0xd6, 0x7d,
+-      0x3b, 0xde, 0xd9, 0xf7, 0x80, 0x69, 0xbf, 0xd7, 0xbc, 0xf7, 0x9a, 0xf7,
+-      0x00, 0xde, 0xeb, 0xad, 0x5a, 0x95, 0x73, 0xb2, 0xe4, 0xf7, 0x22, 0xbc,
+-      0xdb, 0xf2, 0x24, 0x74, 0x59, 0xa0, 0xa7, 0x7a, 0xe5, 0xf1, 0xba, 0xc2,
+-      0xaf, 0xe5, 0x2e, 0xd1, 0x20, 0xd8, 0x6f, 0x9e, 0xef, 0xe6, 0xc1, 0x4f,
+-      0xde, 0x91, 0x37, 0x3c, 0xec, 0x98, 0xdc, 0xec, 0x0e, 0x78, 0xb3, 0x80,
+-      0xf5, 0xd7, 0xe5, 0x41, 0x51, 0x47, 0x69, 0x5f, 0xb9, 0x50, 0xd1, 0xf9,
+-      0x3e, 0x27, 0x2b, 0x80, 0xb5, 0xf6, 0x3f, 0x0e, 0xe8, 0xdc, 0x14, 0x3f,
+-      0x9f, 0x91, 0xf9, 0xee, 0x23, 0x26, 0x27, 0x82, 0x63, 0x99, 0x57, 0xe9,
+-      0xdf, 0x39, 0x76, 0xda, 0xaa, 0xd4, 0x45, 0xd4, 0x33, 0xfc, 0x6e, 0x25,
+-      0x8d, 0xbe, 0x8b, 0x94, 0x35, 0xd0, 0x53, 0xbe, 0x2d, 0xf1, 0x39, 0xe5,
+-      0x1f, 0x76, 0x7e, 0xf7, 0x73, 0x0e, 0xb0, 0xfe, 0x65, 0x93, 0x71, 0xe1,
+-      0x1e, 0x09, 0x2c, 0xfb, 0x79, 0x50, 0x3c, 0x63, 0xda, 0x61, 0xfc, 0xb6,
+-      0xfa, 0x77, 0x77, 0xc5, 0x8c, 0x7d, 0x5b, 0x81, 0x74, 0x3e, 0xe7, 0x30,
+-      0xc7, 0xd4, 0xf1, 0xfc, 0x38, 0x33, 0x73, 0x6b, 0x68, 0x73, 0x1d, 0x14,
+-      0x5b, 0xc5, 0x8d, 0xd8, 0x56, 0x92, 0xfe, 0xc3, 0xbf, 0x4b, 0xde, 0xf8,
+-      0x47, 0xfc, 0x16, 0x46, 0xe7, 0x79, 0xab, 0x75, 0xa2, 0xda, 0x86, 0xe4,
+-      0x37, 0xda, 0x69, 0xf0, 0xd5, 0xbe, 0x2d, 0x9d, 0xf3, 0x1d, 0xc1, 0x7b,
+-      0x06, 0x74, 0x0c, 0x99, 0x2a, 0xfc, 0x1e, 0x9b, 0x7c, 0xc7, 0xef, 0xb1,
+-      0x3d, 0x95, 0x6f, 0xb2, 0x6d, 0xbe, 0x2f, 0xba, 0xde, 0x0c, 0x8a, 0xbd,
+-      0x34, 0xce, 0x6f, 0xd5, 0xf8, 0x6d, 0x23, 0x6c, 0xb5, 0x38, 0xda, 0x99,
+-      0xc7, 0x36, 0xa4, 0xf2, 0x54, 0xca, 0xcd, 0x8f, 0xa0, 0xfc, 0x34, 0xfc,
+-      0x75, 0x1d, 0x9f, 0x2f, 0x37, 0x99, 0xaf, 0xe2, 0xa8, 0x7b, 0xcf, 0xe4,
+-      0x52, 0x01, 0xeb, 0xf9, 0xdf, 0x3e, 0x47, 0x51, 0x47, 0xf8, 0x4a, 0x86,
+-      0x47, 0xfd, 0x5c, 0x84, 0x0d, 0x87, 0x3a, 0xa1, 0xd4, 0x8c, 0xa8, 0x1c,
+-      0x17, 0x6d, 0x8f, 0xd0, 0xd6, 0x0b, 0xa3, 0x2f, 0xf7, 0xda, 0x4b, 0x7d,
+-      0xd5, 0xa2, 0x4c, 0x4a, 0x61, 0x9d, 0x86, 0xca, 0x0f, 0x24, 0x9e, 0x5d,
+-      0xa7, 0x48, 0x7f, 0x4d, 0xc9, 0xf8, 0xc4, 0xe8, 0xac, 0xe4, 0x9d, 0x10,
+-      0x7c, 0xb1, 0xb2, 0xf2, 0x73, 0x5e, 0x80, 0x0d, 0x1d, 0xd9, 0x0a, 0x78,
+-      0xdc, 0x1b, 0xd7, 0xa6, 0x1f, 0xa2, 0xf7, 0xa3, 0xef, 0x8e, 0xc4, 0x2a,
+-      0xab, 0xef, 0xf5, 0x58, 0xcf, 0x7b, 0x01, 0xff, 0x7b, 0x6c, 0xe6, 0xef,
+-      0xc3, 0x4f, 0x68, 0x4e, 0xc9, 0xd9, 0xca, 0x7e, 0xe6, 0xc6, 0xa7, 0xb7,
+-      0x81, 0xb7, 0x93, 0xed, 0x7c, 0x7d, 0xe6, 0xb0, 0xf9, 0xba, 0x87, 0x67,
+-      0xc5, 0x5c, 0x79, 0xd2, 0x19, 0xf3, 0xe5, 0x69, 0x87, 0x0d, 0xc9, 0xe3,
+-      0x4d, 0x3f, 0x47, 0x7e, 0x2f, 0x3b, 0x9c, 0x34, 0xf8, 0x59, 0xf8, 0x86,
+-      0x7e, 0x2e, 0x24, 0x73, 0x36, 0x5b, 0xad, 0x93, 0x69, 0xde, 0xc7, 0xce,
+-      0x1c, 0x5d, 0xc3, 0x1e, 0xaf, 0xd5, 0x81, 0xc3, 0xe3, 0xac, 0x63, 0xee,
+-      0x56, 0xb7, 0xe4, 0xc6, 0x55, 0xbc, 0xaf, 0x77, 0xcd, 0xdd, 0x2f, 0x57,
+-      0x6b, 0x51, 0x95, 0x87, 0x56, 0x84, 0x9d, 0xdf, 0x90, 0xdb, 0x0e, 0xef,
+-      0xa3, 0x8f, 0xa8, 0xf1, 0x3e, 0xbf, 0x73, 0x9d, 0xa8, 0x1c, 0x59, 0xd7,
+-      0xf2, 0xe4, 0x54, 0x06, 0x76, 0xcb, 0x25, 0xb1, 0x3e, 0x9a, 0x19, 0x82,
+-      0xef, 0xcd, 0xb5, 0x52, 0x18, 0x07, 0xda, 0x89, 0x91, 0xd7, 0x7f, 0xd1,
+-      0x6a, 0x00, 0xde, 0xdb, 0x4d, 0xda, 0xeb, 0xb0, 0xa1, 0x66, 0x38, 0xc6,
+-      0x13, 0xfb, 0x02, 0xfb, 0x0c, 0x80, 0xfe, 0x42, 0xfa, 0x7b, 0xb4, 0xca,
+-      0x01, 0x69, 0x38, 0x6c, 0xe3, 0x73, 0x4c, 0x1a, 0x51, 0xdf, 0x4f, 0xf9,
+-      0x21, 0xf0, 0x17, 0x57, 0x32, 0xc9, 0xbf, 0xc3, 0x67, 0x4e, 0xe9, 0x5c,
+-      0xed, 0x18, 0x78, 0x28, 0x68, 0x6c, 0xb3, 0x20, 0xe6, 0xf8, 0xbe, 0xa3,
+-      0x6d, 0x05, 0xde, 0xf1, 0x6b, 0x5b, 0x44, 0xeb, 0x18, 0xde, 0xfb, 0x05,
+-      0xe1, 0x0b, 0xf8, 0x7c, 0x79, 0xc8, 0xd8, 0x14, 0x9d, 0xbe, 0x7c, 0x2a,
+-      0x76, 0x91, 0xff, 0x0f, 0x62, 0xf3, 0x83, 0x32, 0x0b, 0x98, 0xcf, 0x9b,
+-      0x7d, 0x3e, 0x92, 0x71, 0xe5, 0x56, 0x9d, 0x77, 0xf0, 0x07, 0x51, 0x32,
+-      0xdf, 0x90, 0x30, 0x8f, 0x99, 0x9c, 0x4a, 0x0f, 0x7b, 0x3d, 0x21, 0x2f,
+-      0xc3, 0xbe, 0x7e, 0xa5, 0x92, 0x4a, 0x1f, 0x51, 0x71, 0xe7, 0x44, 0xec,
+-      0xaa, 0x8c, 0xc5, 0xe9, 0x03, 0x96, 0x9c, 0x44, 0xec, 0x16, 0xe8, 0xe1,
+-      0x76, 0xe5, 0x50, 0x3f, 0xff, 0x27, 0x45, 0x03, 0xfa, 0xf0, 0xb6, 0xca,
+-      0x81, 0x49, 0x30, 0x66, 0x82, 0xf7, 0x21, 0x93, 0x87, 0xc3, 0x75, 0xd8,
+-      0x36, 0x24, 0x2f, 0x57, 0xda, 0xfa, 0x97, 0xeb, 0xe8, 0xdc, 0x36, 0xa5,
+-      0x5f, 0x8f, 0xf6, 0x53, 0x0e, 0x71, 0x3d, 0x3d, 0x87, 0xdf, 0x87, 0x78,
+-      0xf5, 0x63, 0x91, 0x8e, 0xfe, 0xbe, 0xc1, 0x62, 0xde, 0x0b, 0xf7, 0xfe,
+-      0x13, 0x47, 0xdb, 0x40, 0x1c, 0x97, 0x72, 0x8e, 0xaa, 0xf9, 0x78, 0xdf,
+-      0x3b, 0x24, 0x3f, 0x6e, 0xfa, 0xf3, 0x30, 0x1f, 0x87, 0x39, 0x3f, 0x94,
+-      0x7d, 0x9d, 0x30, 0x68, 0xfd, 0xff, 0xb2, 0x8a, 0xeb, 0x4d, 0xa2, 0x3f,
+-      0x75, 0x34, 0xe8, 0xa5, 0x1e, 0xd3, 0xff, 0xdf, 0xa1, 0x2d, 0xe3, 0xf8,
+-      0x4c, 0x7c, 0x72, 0x1d, 0xd8, 0xf8, 0x0f, 0x38, 0xa6, 0xdd, 0xb7, 0x4b,
+-      0x87, 0xc0, 0xaf, 0x27, 0xa4, 0xb1, 0x92, 0x8a, 0x3d, 0x2e, 0xfe, 0xbc,
+-      0xad, 0x87, 0x79, 0x2f, 0x56, 0xc8, 0x8c, 0x39, 0x0b, 0x0a, 0x1e, 0xde,
+-      0xdd, 0x26, 0x9c, 0xab, 0x58, 0xaf, 0xd1, 0xdc, 0x1d, 0x7b, 0x48, 0x64,
+-      0xb7, 0x24, 0x95, 0xd6, 0x67, 0x33, 0x22, 0x5b, 0x38, 0x9b, 0x3f, 0x31,
+-      0x67, 0xf3, 0x7e, 0xcc, 0xed, 0x5e, 0x18, 0x97, 0xd4, 0x85, 0x54, 0xfc,
+-      0xbc, 0xf0, 0x8e, 0xf9, 0x00, 0xef, 0x98, 0xad, 0x47, 0x32, 0x71, 0xec,
+-      0x37, 0x81, 0xfd, 0xa2, 0x6c, 0xf2, 0x99, 0xdf, 0xf7, 0xef, 0x23, 0x6f,
+-      0x3f, 0x4c, 0x99, 0x49, 0x5c, 0x14, 0x54, 0x1b, 0xec, 0x93, 0xa7, 0x08,
+-      0xd3, 0xbf, 0xe3, 0xf9, 0xa8, 0x58, 0xe8, 0xad, 0x26, 0xbf, 0x5b, 0xd5,
+-      0xf0, 0xe5, 0x01, 0xdf, 0xbc, 0x86, 0x2f, 0x3e, 0xdb, 0xb6, 0x5d, 0x13,
+-      0xb1, 0xb3, 0x42, 0x7b, 0x89, 0xf6, 0x0b, 0xed, 0xfa, 0xbf, 0xe9, 0xd7,
+-      0xb1, 0x3d, 0xf8, 0xb1, 0x0f, 0x64, 0xdb, 0x7b, 0xef, 0x42, 0xdf, 0x6b,
+-      0x19, 0x95, 0x63, 0xec, 0x4c, 0xc9, 0x7b, 0x25, 0xfb, 0x91, 0x44, 0x3c,
+-      0x6b, 0xb9, 0xc6, 0x06, 0x44, 0x59, 0xe7, 0x33, 0x65, 0xae, 0x6b, 0x6c,
+-      0x0b, 0x9e, 0x4d, 0x06, 0x6b, 0x29, 0xdc, 0xc2, 0x67, 0x1a, 0x02, 0xcd,
+-      0x93, 0xd6, 0xde, 0x05, 0x1e, 0xd2, 0xff, 0x13, 0xe3, 0x2a, 0xf0, 0x58,
+-      0x06, 0x1e, 0x4f, 0xdd, 0x65, 0x83, 0x85, 0xda, 0x36, 0xd8, 0xb6, 0x5a,
+-      0xef, 0x26, 0x60, 0xca, 0x3b, 0xb4, 0xbf, 0xca, 0x6d, 0x5a, 0x21, 0x4c,
+-      0xe3, 0xfc, 0x2e, 0x5b, 0xae, 0x67, 0x78, 0x1e, 0xb0, 0xc1, 0x30, 0xdf,
+-      0xda, 0x0e, 0x2d, 0x61, 0xff, 0x8a, 0x7e, 0x41, 0xbb, 0x09, 0x27, 0x68,
+-      0xf1, 0x2c, 0x38, 0x9f, 0x58, 0x37, 0x00, 0xcb, 0xb6, 0xa2, 0x03, 0x4d,
+-      0x03, 0xdb, 0xf5, 0xde, 0x37, 0xa0, 0x01, 0xee, 0x93, 0xf4, 0xe7, 0xd3,
+-      0x5e, 0xfb, 0xbb, 0x75, 0xf8, 0xb7, 0x25, 0xb9, 0xff, 0x90, 0x27, 0xb9,
+-      0x0b, 0x2d, 0x59, 0x48, 0x8b, 0x35, 0x76, 0x88, 0x34, 0x49, 0x3b, 0x01,
+-      0x36, 0x64, 0x8c, 0x38, 0xd6, 0xf6, 0xe0, 0xec, 0x57, 0xf7, 0xe3, 0xf7,
+-      0x6f, 0xfa, 0x79, 0xbf, 0x94, 0xdb, 0xa0, 0xbc, 0x12, 0xeb, 0xbe, 0x43,
+-      0xda, 0x3f, 0xbc, 0x1d, 0x05, 0xce, 0xd1, 0x9e, 0x7c, 0xa2, 0xcb, 0xc4,
+-      0x51, 0xb5, 0x5e, 0x4e, 0x3e, 0x41, 0xbc, 0xa2, 0xfc, 0xea, 0x4f, 0x1c,
+-      0x3f, 0x27, 0x49, 0xc7, 0x04, 0xc9, 0x17, 0x25, 0x99, 0xcf, 0x30, 0x27,
+-      0xb4, 0x57, 0x8e, 0x40, 0xae, 0x4d, 0x55, 0x26, 0xe5, 0x0b, 0x95, 0x88,
+-      0xb2, 0x1b, 0xfe, 0x2c, 0x9d, 0x8a, 0x8d, 0x5a, 0x2d, 0x79, 0x04, 0xf6,
+-      0xcf, 0xec, 0x50, 0x97, 0xbc, 0x32, 0xae, 0xf3, 0x6f, 0x6f, 0x33, 0xb9,
+-      0xce, 0x61, 0xce, 0x28, 0xf7, 0x03, 0xb9, 0x6f, 0xc1, 0x17, 0xb0, 0xba,
+-      0x65, 0x36, 0x1a, 0x91, 0xe9, 0x34, 0xca, 0x37, 0xa7, 0xd5, 0x37, 0xa4,
+-      0xd9, 0x68, 0xa7, 0x1c, 0x21, 0xcc, 0x2c, 0xdf, 0x62, 0xca, 0x9f, 0xf5,
+-      0x77, 0xc0, 0x62, 0xcd, 0x67, 0x02, 0x6a, 0x7f, 0xe5, 0x3a, 0xe5, 0x1b,
+-      0xc7, 0x40, 0x9e, 0x34, 0x79, 0x0f, 0x59, 0x92, 0x35, 0xc8, 0x97, 0x62,
+-      0x4d, 0xac, 0x8d, 0x0c, 0x2c, 0x6a, 0x57, 0xdb, 0x9f, 0x45, 0xd0, 0xd7,
+-      0x5c, 0x8d, 0xf2, 0x6f, 0x4a, 0xe5, 0x4e, 0xcf, 0xc1, 0xd6, 0x85, 0x4f,
+-      0x3c, 0xdb, 0xed, 0x99, 0x7b, 0xce, 0x5e, 0xc6, 0x43, 0x3a, 0x65, 0x98,
+-      0xff, 0x3f, 0x73, 0x0e, 0x0f, 0x48, 0x5f, 0x09, 0xe7, 0xe2, 0xdb, 0xdc,
+-      0xc0, 0x29, 0xd6, 0xcc, 0xa9, 0x73, 0xf2, 0xcf, 0x84, 0xb2, 0xa7, 0x33,
+-      0x67, 0xdb, 0xb7, 0x39, 0xc8, 0xb3, 0xd4, 0x17, 0x52, 0x0a, 0xc3, 0xa6,
+-      0xed, 0xb9, 0x00, 0xdd, 0x5d, 0xf3, 0x40, 0x2b, 0x93, 0xd0, 0x87, 0x93,
+-      0x52, 0x86, 0xed, 0xf6, 0xd1, 0xf4, 0x67, 0xc5, 0x7e, 0xea, 0xa0, 0xac,
+-      0xd5, 0x7a, 0x80, 0x0f, 0xea, 0x85, 0x90, 0xf2, 0xaf, 0x6f, 0x1f, 0xa7,
+-      0xbe, 0xa3, 0x2e, 0xd1, 0x67, 0xb1, 0x5d, 0xff, 0xc4, 0x80, 0xfe, 0x7e,
+-      0x65, 0xbf, 0x6c, 0xd5, 0x7d, 0x5d, 0x08, 0xff, 0xb0, 0x16, 0x32, 0x7a,
+-      0xb9, 0x17, 0xb2, 0xfb, 0xaf, 0x43, 0x0d, 0xe5, 0xab, 0x73, 0xff, 0xd4,
+-      0x41, 0xea, 0xff, 0x70, 0xf4, 0x36, 0x5c, 0xee, 0xbd, 0x53, 0x07, 0x69,
+-      0xbb, 0xc3, 0x39, 0xcc, 0xf5, 0x78, 0x1f, 0xc7, 0x3d, 0x46, 0x25, 0x74,
+-      0xf1, 0x84, 0xd8, 0xf0, 0x5b, 0x02, 0x4b, 0xb4, 0xf5, 0xee, 0xf4, 0x5d,
+-      0x02, 0x97, 0x6d, 0xf3, 0xad, 0xed, 0xb0, 0xb6, 0x65, 0x32, 0x28, 0x1b,
+-      0xfe, 0xf7, 0xb7, 0xfc, 0xdd, 0xe1, 0xdb, 0x1d, 0x78, 0x03, 0x5d, 0x8a,
+-      0xbf, 0xff, 0x0b, 0xc4, 0xbf, 0x6d, 0x24, 0x80, 0x4a, 0x00, 0x00, 0x00 };
++      0xcd, 0x7c, 0x7f, 0x6c, 0x5c, 0xd7, 0x75, 0xe6, 0x79, 0x6f, 0xde, 0x90,
++      0x43, 0x8a, 0xa2, 0x1e, 0x99, 0x31, 0x33, 0x8e, 0xd8, 0x7a, 0x86, 0xf3,
++      0x48, 0xd1, 0x21, 0xe3, 0x3e, 0x33, 0x63, 0x99, 0x76, 0xa6, 0xd6, 0x64,
++      0x66, 0x28, 0x2b, 0x0e, 0x69, 0xd0, 0x8e, 0x82, 0x4d, 0x01, 0x03, 0xe5,
++      0x0e, 0xa9, 0x54, 0xd9, 0xf5, 0x22, 0xda, 0x34, 0x45, 0x8a, 0xa2, 0x88,
++      0x26, 0x24, 0xe5, 0x2a, 0xcd, 0x88, 0x1c, 0xcb, 0x34, 0x1b, 0x14, 0x5e,
++      0x64, 0x3c, 0xa4, 0x14, 0xb7, 0x1d, 0x89, 0x72, 0xe2, 0x2d, 0xbc, 0x58,
++      0x07, 0x66, 0xa9, 0x1f, 0x4e, 0x83, 0x14, 0xf0, 0x2e, 0xbc, 0x68, 0x60,
++      0xa4, 0x80, 0x20, 0xbb, 0x8d, 0xb3, 0xc8, 0x62, 0x83, 0xdd, 0x00, 0x71,
++      0x02, 0x27, 0x6f, 0xbf, 0xef, 0xde, 0xfb, 0xc8, 0xd1, 0x88, 0x76, 0xd2,
++      0xfc, 0xb5, 0x04, 0x06, 0xf7, 0xfd, 0xb8, 0x3f, 0xce, 0x3d, 0xf7, 0xdc,
++      0x73, 0xbe, 0x73, 0xee, 0x79, 0x7c, 0x40, 0xa4, 0x53, 0xcc, 0xdf, 0x5e,
++      0xfc, 0x32, 0xff, 0xe1, 0xb3, 0xb3, 0x63, 0x77, 0x65, 0xee, 0xc2, 0xe5,
++      0x87, 0xed, 0xf7, 0x3b, 0x0e, 0x9f, 0x47, 0xf0, 0x8b, 0xe3, 0x37, 0x66,
++      0xae, 0x77, 0xfb, 0x73, 0xf1, 0x3b, 0x68, 0x89, 0xcc, 0xfc, 0x4f, 0x11,
++      0xab, 0xe5, 0x5d, 0xec, 0x5d, 0xda, 0xbc, 0xd7, 0x9f, 0xfd, 0x1b, 0xb4,
++      0xf9, 0xd7, 0xfe, 0x45, 0x34, 0xd9, 0x6a, 0xde, 0xfc, 0x49, 0xcc, 0xce,
++      0xce, 0x4c, 0xe6, 0x3d, 0x89, 0x45, 0xb2, 0x47, 0xa7, 0x66, 0x3d, 0x91,
++      0x5c, 0x63, 0x24, 0x59, 0x90, 0x5f, 0x04, 0xe5, 0xb8, 0x23, 0x7c, 0xfe,
++      0x5b, 0xd9, 0x77, 0xbe, 0xf6, 0xad, 0x7b, 0x53, 0x3f, 0xae, 0x45, 0x24,
++      0xe6, 0x66, 0xdf, 0x16, 0x77, 0x48, 0x62, 0xfd, 0x68, 0xf3, 0xcc, 0x81,
++      0x57, 0x6d, 0xe9, 0x0e, 0xfb, 0x72, 0x67, 0x22, 0x59, 0x99, 0x3e, 0x56,
++      0x39, 0x19, 0xd8, 0x9e, 0x94, 0x9d, 0xac, 0x37, 0x5c, 0x97, 0xae, 0xf1,
++      0x73, 0x99, 0x7b, 0x05, 0xf7, 0xd3, 0xc7, 0x1a, 0x31, 0x99, 0x6f, 0x94,
++      0xbb, 0x6c, 0xcf, 0x43, 0x29, 0xb1, 0xb6, 0xec, 0x62, 0xec, 0x9a, 0xc7,
++      0xb1, 0xbf, 0x8a, 0xb1, 0xf7, 0x4b, 0xd4, 0x0b, 0x82, 0x73, 0x18, 0xfb,
++      0x70, 0xe3, 0x17, 0xc1, 0xb3, 0x8e, 0x1e, 0xd7, 0xce, 0x9e, 0x88, 0xb0,
++      0xb4, 0xb2, 0xb5, 0xc9, 0x81, 0x06, 0xef, 0x8b, 0xed, 0x9a, 0x4e, 0xbf,
++      0x13, 0x74, 0xc6, 0x9c, 0xec, 0x89, 0xce, 0x45, 0x94, 0xd1, 0x6c, 0x7c,
++      0xec, 0x9c, 0xaa, 0xb7, 0x6e, 0xea, 0x3d, 0x1e, 0xd5, 0xed, 0xde, 0x9a,
++      0x1c, 0x6a, 0xb0, 0xfc, 0xc9, 0xe4, 0xa0, 0x2a, 0xdf, 0x99, 0x4c, 0xab,
++      0x52, 0xa6, 0x06, 0x54, 0xe9, 0x4c, 0x79, 0xaa, 0x7c, 0xc6, 0x3c, 0x7f,
++      0x6e, 0x32, 0xa9, 0xca, 0x86, 0x29, 0x2f, 0x99, 0xf2, 0x05, 0x53, 0xbe,
++      0x68, 0xca, 0x97, 0x4c, 0xb9, 0x69, 0xca, 0x2b, 0x93, 0xba, 0x9f, 0x6f,
++      0x9b, 0xfb, 0xef, 0x9a, 0xf2, 0x55, 0x53, 0xbe, 0x66, 0xca, 0xef, 0x99,
++      0xf2, 0xfb, 0x86, 0xae, 0xeb, 0xa6, 0x7c, 0xd3, 0x94, 0x3f, 0x32, 0xef,
++      0x7f, 0x6c, 0xe8, 0x7d, 0x1b, 0x74, 0xfd, 0x49, 0xd4, 0xc8, 0x2a, 0xe6,
++      0x9d, 0x94, 0xd9, 0x8a, 0x23, 0xf3, 0xcb, 0x11, 0x29, 0xa8, 0x35, 0xfc,
++      0xca, 0x5e, 0xe9, 0x74, 0x64, 0x61, 0x23, 0x26, 0xd7, 0x95, 0x88, 0xbe,
++      0x15, 0x7c, 0xeb, 0x80, 0x94, 0xed, 0xac, 0x2b, 0x97, 0x36, 0xe2, 0xf2,
++      0xf2, 0x86, 0x58, 0xd3, 0x99, 0x0e, 0xb1, 0xcf, 0x7e, 0x40, 0x72, 0xae,
++      0x25, 0x11, 0xc5, 0xd3, 0xa4, 0xe4, 0x2b, 0x7d, 0xb8, 0x4f, 0x25, 0x44,
++      0xae, 0xee, 0xd5, 0xeb, 0x17, 0x93, 0xc8, 0x2a, 0xd7, 0xe4, 0xfe, 0xa9,
++      0x6b, 0x2b, 0x09, 0x71, 0x96, 0x46, 0x31, 0x46, 0x97, 0x44, 0x57, 0xa5,
++      0x3f, 0x22, 0x83, 0x89, 0x4f, 0xa3, 0x46, 0xb1, 0xe1, 0xc8, 0x44, 0xc3,
++      0x12, 0xc7, 0x8b, 0x41, 0x3e, 0xba, 0xf0, 0x73, 0xf1, 0x8b, 0xe3, 0x97,
++      0xc0, 0xef, 0x47, 0xe8, 0xa7, 0x5f, 0x0a, 0x0d, 0xf6, 0x89, 0x71, 0x97,
++      0x31, 0xfe, 0x72, 0xca, 0x9d, 0x11, 0xd2, 0x95, 0x90, 0x6f, 0x1d, 0x20,
++      0x5d, 0x2e, 0xe9, 0x01, 0x6d, 0x31, 0x2b, 0xbf, 0x22, 0x27, 0x0a, 0xbe,
++      0x24, 0x6d, 0xaf, 0x53, 0x4a, 0xae, 0x95, 0x9c, 0x1b, 0xee, 0x95, 0xf2,
++      0x51, 0xbc, 0x5f, 0x96, 0x9c, 0x8d, 0xfe, 0x4b, 0xae, 0xcc, 0xe8, 0x77,
++      0x7c, 0xf6, 0x36, 0xf6, 0x6a, 0xca, 0xa5, 0xd0, 0xbe, 0xbc, 0xfc, 0xb7,
++      0xb8, 0x66, 0x7f, 0x3f, 0x77, 0x34, 0xdd, 0x3f, 0xc5, 0x3d, 0x9f, 0x0f,
++      0x99, 0x79, 0xf0, 0x9a, 0x75, 0xc3, 0x71, 0xc3, 0xf9, 0x72, 0xfc, 0x61,
++      0xcc, 0x99, 0x34, 0x84, 0x73, 0x96, 0x72, 0x14, 0xb4, 0xd4, 0x57, 0xba,
++      0xac, 0xb5, 0x95, 0x51, 0x79, 0x62, 0xf9, 0x01, 0xc9, 0xfb, 0x41, 0x30,
++      0xeb, 0x4b, 0xdc, 0x96, 0x41, 0xb7, 0x80, 0x0a, 0x5b, 0x0d, 0xb1, 0xea,
++      0x15, 0x89, 0xb5, 0x83, 0x2f, 0x3f, 0x58, 0x61, 0xdf, 0x0e, 0x9e, 0xf5,
++      0xa1, 0x7e, 0xb7, 0xb5, 0xbe, 0x02, 0xfa, 0xb3, 0xe4, 0x4f, 0x10, 0x2c,
++      0xfa, 0x83, 0x89, 0x39, 0x8c, 0x79, 0xb9, 0x31, 0x38, 0x7e, 0x43, 0x5c,
++      0xf4, 0xd9, 0x8b, 0x3a, 0xe4, 0x15, 0xfb, 0x62, 0x9f, 0xec, 0xaf, 0x0b,
++      0x6d, 0xe3, 0x78, 0x47, 0xba, 0x82, 0x20, 0xef, 0xbb, 0xbc, 0x97, 0x4d,
++      0xf0, 0x6f, 0x93, 0xfc, 0xeb, 0xec, 0x97, 0x57, 0x1a, 0x1c, 0x63, 0x37,
++      0xda, 0x47, 0xfe, 0x3f, 0xa4, 0x3d, 0x81, 0xfe, 0xe3, 0x28, 0xf7, 0x58,
++      0xf5, 0x6a, 0x80, 0xf1, 0x13, 0xb8, 0xde, 0x6d, 0x1e, 0xd7, 0xd5, 0xda,
++      0x5f, 0xc2, 0xda, 0xbb, 0xd9, 0xb8, 0x3c, 0xbf, 0xd1, 0x8f, 0x79, 0x24,
++      0xe4, 0x1b, 0x90, 0xcd, 0x9e, 0x83, 0x7b, 0x24, 0x0d, 0xd9, 0xe4, 0x9a,
++      0x8f, 0xad, 0xce, 0x49, 0x29, 0x9e, 0x1a, 0xa6, 0x1e, 0xcd, 0x8f, 0xed,
++      0xc3, 0x7c, 0xb5, 0xb6, 0x1a, 0x58, 0xca, 0xed, 0xb7, 0xe5, 0x90, 0xd8,
++      0x59, 0x8c, 0x9b, 0x19, 0x01, 0x2d, 0x11, 0xbc, 0x8b, 0x8b, 0xb7, 0x9a,
++      0xc3, 0xb3, 0x54, 0xa2, 0x04, 0x1a, 0xe7, 0x41, 0x63, 0x49, 0xca, 0x62,
++      0x5f, 0x7c, 0xce, 0x0a, 0xf7, 0x8a, 0xe6, 0xdd, 0xb0, 0xe9, 0x67, 0x5b,
++      0xce, 0x2d, 0x7b, 0xb5, 0xcb, 0x8a, 0xac, 0x8e, 0xca, 0xa9, 0x5d, 0x78,
++      0x56, 0x07, 0xcf, 0xec, 0xa5, 0x70, 0x1f, 0x38, 0xb8, 0xef, 0x43, 0xdd,
++      0x6e, 0xcb, 0x59, 0xbd, 0x95, 0x5f, 0x6b, 0x8d, 0x41, 0x7f, 0x0b, 0xfc,
++      0xb2, 0x57, 0x7b, 0x51, 0xe7, 0x56, 0x7e, 0xd5, 0xc1, 0x2f, 0x7b, 0x55,
++      0xf3, 0xaa, 0x0e, 0x5e, 0xd9, 0x4b, 0x71, 0x94, 0x7b, 0x2c, 0xfb, 0xac,
++      0xe6, 0x55, 0xdd, 0xec, 0x99, 0xf3, 0x4a, 0x5f, 0xe5, 0x40, 0xab, 0x25,
++      0x5a, 0x67, 0xe5, 0x84, 0xba, 0x29, 0x92, 0x2d, 0x62, 0xaf, 0xdb, 0xe0,
++      0x85, 0x23, 0xc5, 0x31, 0x4b, 0x66, 0xd5, 0xbb, 0xa2, 0xa4, 0x1b, 0x1f,
++      0x00, 0x23, 0x47, 0x86, 0x61, 0x29, 0xca, 0x6d, 0xd9, 0x17, 0xed, 0xad,
++      0x4a, 0x4c, 0x0a, 0x4e, 0x52, 0xbc, 0x25, 0xa5, 0xc7, 0x9b, 0xfa, 0x99,
++      0x41, 0x3f, 0xdf, 0x01, 0x3f, 0x2c, 0xe8, 0x56, 0xbe, 0x7b, 0x4c, 0xed,
++      0xfb, 0xf4, 0xaa, 0x23, 0x83, 0x4b, 0xac, 0x53, 0xb6, 0xaf, 0x34, 0xde,
++      0x09, 0x74, 0xbf, 0x8f, 0x71, 0x4c, 0xd7, 0xce, 0x2e, 0xda, 0x97, 0xd7,
++      0x4f, 0xdb, 0x57, 0x1b, 0xe8, 0xb7, 0xc1, 0xb5, 0xc0, 0x5a, 0x2d, 0x63,
++      0xad, 0x96, 0xb1, 0x6e, 0x66, 0x4f, 0xd7, 0xd4, 0xde, 0x4a, 0x9a, 0x75,
++      0x25, 0x0d, 0x5c, 0xdb, 0x04, 0xd6, 0x94, 0x6b, 0x2b, 0xd6, 0xab, 0x99,
++      0x3d, 0x12, 0x39, 0x1b, 0x51, 0x6b, 0xda, 0xb3, 0xfa, 0x91, 0xed, 0x35,
++      0x1d, 0x68, 0x5a, 0x53, 0xfb, 0x5d, 0xd6, 0xd4, 0xd9, 0x65, 0x4d, 0xb7,
++      0x1a, 0x3f, 0x31, 0x6b, 0xfa, 0x73, 0x31, 0xb2, 0xff, 0x9e, 0xfc, 0x1a,
++      0x00, 0xbf, 0xbc, 0x5f, 0x83, 0x5f, 0xce, 0xae, 0xfc, 0xea, 0xb3, 0x5b,
++      0xf9, 0x15, 0x01, 0xbf, 0xa2, 0xbf, 0x36, 0xbf, 0xc0, 0x87, 0x5d, 0x79,
++      0x15, 0x83, 0xde, 0x2b, 0x4b, 0x3e, 0x23, 0x92, 0xaf, 0x6a, 0x5d, 0x5d,
++      0x56, 0x3a, 0x9b, 0xba, 0x2a, 0xd4, 0xd9, 0xd4, 0xd7, 0x6a, 0x9f, 0x58,
++      0x85, 0x4a, 0x12, 0xba, 0xd4, 0x41, 0xf9, 0x1c, 0xca, 0x3d, 0xd6, 0x74,
++      0xb5, 0x1f, 0x76, 0x36, 0x10, 0x77, 0x2c, 0xb4, 0x97, 0xe5, 0x84, 0x8b,
++      0xb5, 0x71, 0xef, 0x8a, 0x8a, 0xf4, 0xa5, 0xc0, 0xa7, 0x14, 0xde, 0xa7,
++      0x12, 0x39, 0xc9, 0xda, 0x21, 0xae, 0xc9, 0x57, 0x3a, 0xde, 0xce, 0xa9,
++      0x2b, 0x3e, 0x67, 0xbb, 0x0c, 0x9e, 0x45, 0x65, 0x06, 0x76, 0xa0, 0xe8,
++      0x71, 0x3c, 0xf6, 0x9f, 0x9c, 0xe1, 0xb8, 0x85, 0x46, 0xa8, 0xb3, 0x25,
++      0x07, 0x1b, 0x8e, 0x77, 0xdc, 0xb7, 0xe3, 0x56, 0x41, 0xd9, 0xa0, 0x8c,
++      0x78, 0x8d, 0x66, 0xfb, 0xb2, 0x4d, 0x27, 0xf6, 0x73, 0x0e, 0x72, 0x4d,
++      0xda, 0x92, 0xd8, 0x7b, 0xc7, 0x22, 0xe1, 0xfa, 0x38, 0xd9, 0x71, 0x81,
++      0x5d, 0x96, 0xf9, 0x0a, 0xfb, 0xfb, 0x63, 0x2b, 0x72, 0x31, 0xec, 0x9f,
++      0x7c, 0x64, 0xdf, 0xba, 0xbf, 0xf9, 0xc6, 0x5b, 0x46, 0x37, 0x28, 0x5b,
++      0x85, 0xfe, 0xca, 0x4d, 0xfd, 0x95, 0xad, 0xc8, 0x92, 0xec, 0x53, 0xf6,
++      0xe0, 0x28, 0xf9, 0x77, 0x1a, 0xef, 0xae, 0x4b, 0x84, 0x32, 0xa3, 0xf6,
++      0x18, 0xf7, 0xfb, 0x97, 0x38, 0xdf, 0x26, 0xde, 0x4e, 0xc3, 0xc6, 0x71,
++      0x7f, 0x61, 0x8d, 0xe3, 0x7c, 0x7e, 0xc8, 0xd0, 0xe4, 0x48, 0x4e, 0xdd,
++      0x7f, 0x63, 0x4f, 0xa8, 0x3f, 0xb1, 0x9f, 0x41, 0xdb, 0x8b, 0x6a, 0x8e,
++      0x76, 0x36, 0x0b, 0xde, 0x34, 0xd3, 0xc8, 0x79, 0x67, 0xb1, 0xc6, 0xa1,
++      0x0e, 0x0b, 0xd7, 0x8a, 0xb8, 0xc6, 0xb1, 0x16, 0x2a, 0x5d, 0xb0, 0x8f,
++      0x31, 0x63, 0x83, 0xd9, 0x7e, 0x11, 0xed, 0xf9, 0x9c, 0x6d, 0xbb, 0x60,
++      0x8f, 0xd9, 0x7e, 0xd1, 0xb4, 0xdf, 0xb1, 0xcb, 0xdc, 0x2b, 0xb4, 0xc9,
++      0x57, 0x32, 0xc0, 0x42, 0x2b, 0xb6, 0x14, 0x7c, 0xe0, 0x1c, 0xbf, 0xdf,
++      0xec, 0x0b, 0x2d, 0x9b, 0x1f, 0x75, 0x2c, 0x69, 0xf7, 0x76, 0x93, 0xcd,
++      0x7f, 0xb0, 0xb5, 0xad, 0xdb, 0x91, 0xcd, 0x05, 0xe8, 0xa8, 0x53, 0x90,
++      0x95, 0xc5, 0xed, 0x7a, 0x94, 0x4b, 0x25, 0xa3, 0x90, 0xcd, 0xd4, 0x38,
++      0xa7, 0x79, 0xa5, 0xd1, 0x2c, 0xa3, 0x61, 0x1f, 0x31, 0x25, 0x07, 0x7a,
++      0x9c, 0xc5, 0xa6, 0x71, 0x16, 0x9b, 0xc6, 0x59, 0x32, 0xd8, 0x8e, 0xfd,
++      0x68, 0xbb, 0x7a, 0xfd, 0x26, 0x7b, 0xce, 0x35, 0xfb, 0x24, 0xf6, 0xa4,
++      0x96, 0x05, 0x60, 0x35, 0xbd, 0x06, 0x15, 0x57, 0xe6, 0x37, 0x2e, 0x84,
++      0x7b, 0xb5, 0xdc, 0x8e, 0xe7, 0x3f, 0xc4, 0xf3, 0xe1, 0x33, 0x2e, 0xec,
++      0x14, 0xb1, 0xda, 0x4b, 0x72, 0xae, 0x42, 0x19, 0x79, 0x11, 0x74, 0xa7,
++      0xfd, 0x36, 0x8b, 0x7c, 0x4d, 0x0d, 0x9f, 0x97, 0x54, 0x72, 0x5e, 0x46,
++      0x7c, 0x96, 0x4f, 0x88, 0xc2, 0x58, 0xa2, 0x31, 0xd0, 0x8b, 0x90, 0x3f,
++      0x91, 0x1f, 0x57, 0xda, 0xc5, 0x1e, 0xfb, 0x61, 0x40, 0x3b, 0x78, 0x7a,
++      0xa3, 0xb5, 0x1f, 0x91, 0xa1, 0x33, 0xaa, 0x1f, 0xf4, 0x91, 0xf6, 0xbf,
++      0xad, 0xfa, 0x0b, 0xfb, 0xc2, 0x3c, 0xc7, 0x5a, 0xfb, 0x73, 0xe4, 0xba,
++      0x6b, 0xa3, 0xbf, 0xb4, 0x99, 0x23, 0xaf, 0x21, 0x23, 0xae, 0x83, 0xf2,
++      0x61, 0x3b, 0x94, 0x19, 0x7b, 0xec, 0x3b, 0x41, 0x6e, 0x9a, 0x73, 0x2b,
++      0x99, 0x67, 0xff, 0xc3, 0xc8, 0x9b, 0x54, 0xed, 0x2c, 0x78, 0x96, 0x19,
++      0xc4, 0x78, 0xbc, 0x4f, 0x02, 0x1f, 0x49, 0x99, 0xf8, 0xac, 0x54, 0xf9,
++      0x65, 0x90, 0x73, 0x34, 0xa6, 0xd2, 0x6b, 0xcf, 0xf7, 0x96, 0x14, 0x50,
++      0x77, 0xc1, 0xe8, 0x83, 0x62, 0xe3, 0xba, 0xe2, 0xdf, 0xf3, 0x6a, 0x1f,
++      0xa5, 0x4e, 0x97, 0xa9, 0x37, 0x36, 0xdc, 0x08, 0xf7, 0xf8, 0x25, 0xff,
++      0xa5, 0x60, 0x61, 0x39, 0x95, 0x4c, 0xda, 0x83, 0x52, 0xaa, 0x0e, 0x96,
++      0x6d, 0x94, 0x27, 0x6a, 0x09, 0x39, 0x51, 0x61, 0x3f, 0xfb, 0x51, 0x07,
++      0x8a, 0xc8, 0xc6, 0x26, 0xef, 0xa3, 0xae, 0xe1, 0x98, 0x6f, 0x5b, 0x7a,
++      0x4c, 0xcc, 0xc1, 0xdb, 0xb4, 0xfe, 0x63, 0xe3, 0x8a, 0x55, 0xaa, 0x71,
++      0xfd, 0xf1, 0xbc, 0xd1, 0xac, 0x8f, 0x42, 0x5d, 0xb4, 0x83, 0xc5, 0x22,
++      0xd9, 0x45, 0xab, 0xb4, 0x22, 0x76, 0xde, 0x8f, 0x12, 0x0f, 0x26, 0x45,
++      0xee, 0x75, 0xf5, 0x3c, 0x3f, 0x19, 0xa1, 0x1e, 0x74, 0xbc, 0xd3, 0xe8,
++      0xbb, 0x53, 0x72, 0x0e, 0xd7, 0x9f, 0xd7, 0x12, 0x44, 0xb2, 0x1e, 0x6d,
++      0xa5, 0x13, 0xc9, 0x3a, 0xd8, 0x63, 0xac, 0xf3, 0x52, 0xc0, 0xbd, 0x90,
++      0xaf, 0x6a, 0x19, 0x29, 0xef, 0x60, 0x2f, 0xd0, 0x9b, 0x83, 0x8e, 0x11,
++      0x1b, 0x7b, 0xcc, 0x8d, 0x64, 0xf9, 0x7c, 0x1c, 0xd7, 0x9b, 0xa8, 0x4f,
++      0x1d, 0x0b, 0x4c, 0x5a, 0x53, 0xbc, 0xc3, 0x58, 0x39, 0xab, 0x58, 0x09,
++      0x79, 0xf2, 0x52, 0xf0, 0xe4, 0x72, 0x88, 0x11, 0x94, 0x6c, 0xc9, 0xc0,
++      0xd9, 0xa4, 0xd9, 0xd7, 0x5d, 0xdc, 0x73, 0xe4, 0x3f, 0x9e, 0xf9, 0xe6,
++      0x59, 0x7b, 0xd3, 0xb3, 0x70, 0xff, 0x7f, 0x09, 0xb4, 0xf5, 0x2b, 0xfe,
++      0xd8, 0xd9, 0x23, 0x56, 0x5e, 0xe1, 0x93, 0x20, 0x28, 0x78, 0x51, 0x29,
++      0x8d, 0xfe, 0x09, 0xe6, 0xca, 0x77, 0x65, 0x30, 0x9c, 0x76, 0x63, 0x78,
++      0x72, 0xd6, 0x4b, 0x29, 0xfb, 0x9f, 0xc7, 0xfe, 0xd3, 0x3a, 0x53, 0xca,
++      0x3d, 0xa0, 0xdd, 0x5b, 0xe2, 0x9a, 0xbc, 0x14, 0x9c, 0x05, 0x16, 0x9e,
++      0x5e, 0x2a, 0x5a, 0x03, 0xd8, 0x12, 0x76, 0x9f, 0x05, 0x3e, 0x77, 0x49,
++      0xfe, 0x22, 0xd7, 0x82, 0x75, 0xf8, 0xbc, 0x4d, 0xa6, 0xe3, 0xad, 0xb6,
++      0xf2, 0xdc, 0x3e, 0xe9, 0x24, 0xbf, 0x51, 0x77, 0xe9, 0xff, 0x46, 0xb4,
++      0x5e, 0x76, 0x65, 0x60, 0x95, 0x7c, 0x2f, 0x5a, 0xb3, 0x15, 0xea, 0xb1,
++      0x0e, 0xd8, 0x47, 0x3e, 0x67, 0x9f, 0x78, 0x77, 0xbe, 0xb5, 0x8f, 0xdf,
++      0x8b, 0xe8, 0x3e, 0xd8, 0x2e, 0xec, 0xa3, 0x99, 0x1f, 0x7b, 0x94, 0x9e,
++      0xeb, 0xcd, 0xf6, 0xb6, 0xf4, 0x9b, 0x68, 0xea, 0x17, 0xef, 0xce, 0x7f,
++      0x37, 0x42, 0x5c, 0xf6, 0xf2, 0x32, 0xf8, 0xac, 0xe6, 0xc4, 0x77, 0x6c,
++      0x53, 0xb4, 0x0a, 0x4b, 0x41, 0x30, 0xed, 0xdb, 0x12, 0xe9, 0x0b, 0xeb,
++      0xea, 0x79, 0x15, 0x31, 0xaf, 0x3c, 0xe6, 0x65, 0xf7, 0xb5, 0xd2, 0xf4,
++      0xfb, 0x86, 0xa6, 0xde, 0x26, 0x9a, 0xe2, 0xef, 0x31, 0xaf, 0xf8, 0x2e,
++      0xf3, 0x7a, 0xa9, 0x57, 0xf7, 0x11, 0x6f, 0xea, 0xa3, 0xaf, 0xa5, 0x0f,
++      0xe8, 0xfd, 0x38, 0xdb, 0xf7, 0xed, 0xd2, 0xfe, 0x87, 0x1d, 0xba, 0x3d,
++      0xdb, 0xb4, 0x41, 0xb7, 0xf7, 0x1b, 0xbd, 0x78, 0xa2, 0x49, 0x97, 0x9d,
++      0x80, 0x2e, 0x6b, 0x6e, 0xd3, 0x2c, 0xff, 0xa1, 0x8f, 0x44, 0xff, 0x28,
++      0xc4, 0x8a, 0x1f, 0x50, 0x18, 0x64, 0x07, 0x63, 0xc7, 0x80, 0x47, 0xba,
++      0x60, 0xff, 0xbb, 0xe9, 0x07, 0x19, 0x4c, 0x48, 0xbf, 0x88, 0x38, 0x50,
++      0x3c, 0xa0, 0x28, 0xe8, 0x96, 0xc1, 0xc4, 0x31, 0x11, 0xe5, 0x07, 0x11,
++      0x5f, 0xd3, 0x27, 0xe2, 0x38, 0xf4, 0x89, 0xb8, 0xee, 0xbc, 0x2f, 0x6c,
++      0xfb, 0x48, 0xfd, 0xd8, 0xf7, 0xc4, 0xc7, 0xdc, 0x33, 0xa1, 0xad, 0x69,
++      0xd6, 0xa7, 0xbb, 0xd1, 0xd4, 0xdf, 0x42, 0x13, 0x74, 0x12, 0x7c, 0xb3,
++      0x05, 0xc8, 0x23, 0x30, 0x29, 0x74, 0xe0, 0xfd, 0x53, 0xe7, 0x56, 0x44,
++      0x4a, 0x0d, 0xda, 0xc7, 0x51, 0x81, 0x5f, 0x05, 0xba, 0xd8, 0xb7, 0xb2,
++      0x91, 0xd0, 0x4d, 0xdd, 0x39, 0x3b, 0x3b, 0x08, 0x3f, 0xdc, 0x91, 0x39,
++      0x43, 0xdb, 0x8c, 0xf2, 0xe1, 0xba, 0x50, 0x26, 0x94, 0x5c, 0xcd, 0x80,
++      0x3e, 0x5e, 0xcf, 0x18, 0xec, 0x7e, 0xac, 0xd1, 0x4a, 0xdb, 0xf7, 0x40,
++      0x9b, 0x07, 0x1a, 0x92, 0xf2, 0x02, 0xb0, 0xfb, 0x37, 0xd5, 0xbe, 0x0c,
++      0x75, 0x17, 0x65, 0x29, 0x55, 0x2d, 0xcb, 0x66, 0xb0, 0xb2, 0xcc, 0x7d,
++      0x4b, 0x1b, 0xde, 0x25, 0x65, 0xac, 0xd7, 0xc0, 0x52, 0x2a, 0x99, 0xb3,
++      0xc5, 0x7a, 0xdf, 0x41, 0xca, 0xd3, 0xe3, 0x32, 0x70, 0x51, 0x2c, 0x67,
++      0x09, 0x7b, 0xbd, 0x3b, 0xc4, 0x57, 0x9c, 0xdf, 0x6f, 0x63, 0x7e, 0xe8,
++      0x7b, 0x39, 0x9c, 0x5f, 0x97, 0x94, 0x56, 0x39, 0xbf, 0xed, 0xb9, 0xc5,
++      0x19, 0x11, 0xf9, 0x1c, 0xf4, 0x35, 0xe6, 0x08, 0x1a, 0xc7, 0x81, 0x73,
++      0xef, 0x30, 0x73, 0xea, 0xc2, 0x9c, 0x60, 0xa3, 0x97, 0xd8, 0x1e, 0x74,
++      0x81, 0xe6, 0x12, 0xea, 0xcd, 0x2f, 0x71, 0xcd, 0x41, 0x2b, 0xd6, 0xbd,
++      0xd4, 0xe0, 0xda, 0x73, 0x6e, 0xda, 0xae, 0x3b, 0x1e, 0xe7, 0xc7, 0x79,
++      0x0e, 0x63, 0x5e, 0xac, 0xc3, 0x76, 0xad, 0x32, 0x32, 0xfc, 0x1e, 0xeb,
++      0xf1, 0xdb, 0x2d, 0xeb, 0x21, 0x66, 0x3d, 0x62, 0xd2, 0xb6, 0xaa, 0xfc,
++      0x65, 0x45, 0x03, 0x7d, 0x08, 0x07, 0xf4, 0x2f, 0xae, 0xc8, 0x68, 0x54,
++      0x48, 0x7b, 0x82, 0xcf, 0x32, 0x6d, 0x32, 0xe8, 0x5f, 0x81, 0x5c, 0x95,
++      0x20, 0x0b, 0xf4, 0x07, 0x5e, 0x5e, 0xd6, 0x6b, 0x51, 0x6a, 0x74, 0xc2,
++      0x47, 0xe7, 0xf8, 0xe4, 0x37, 0xe7, 0xe6, 0xaa, 0x75, 0x68, 0x5e, 0x97,
++      0x4f, 0xdf, 0xb2, 0x2e, 0xd4, 0xbb, 0xd4, 0x03, 0xc4, 0x3d, 0xd4, 0x05,
++      0x61, 0x4c, 0xa0, 0xe6, 0xea, 0xfd, 0x14, 0xda, 0x9f, 0xeb, 0xdb, 0xf8,
++      0x52, 0xaf, 0x59, 0xc2, 0xc4, 0x05, 0xba, 0xc4, 0x5e, 0xbd, 0x83, 0x7a,
++      0x1f, 0xf6, 0x27, 0x9c, 0xdf, 0xef, 0xe0, 0x3e, 0x71, 0xd3, 0x7a, 0xd8,
++      0x98, 0x93, 0xa3, 0xe6, 0xa8, 0xd6, 0x62, 0x5b, 0xe6, 0xe6, 0x1a, 0x7a,
++      0x5e, 0xce, 0xd2, 0x1e, 0xb3, 0x1e, 0x31, 0x3c, 0xe3, 0xbc, 0x42, 0x9b,
++      0xc3, 0x79, 0x91, 0x5e, 0xd7, 0xc8, 0x1c, 0xe7, 0xc3, 0xfd, 0xd7, 0x2c,
++      0x6b, 0x2f, 0x05, 0xd5, 0xe5, 0xa8, 0x9a, 0x7b, 0xde, 0xef, 0x26, 0x46,
++      0xa3, 0x8e, 0x34, 0xfa, 0x89, 0xcf, 0x69, 0x07, 0xf1, 0x2e, 0x43, 0x19,
++      0xc2, 0x7d, 0x9d, 0xf7, 0xcd, 0x36, 0xed, 0x79, 0x47, 0xeb, 0x01, 0xc6,
++      0x9f, 0xde, 0xdb, 0xd6, 0x45, 0xb3, 0x62, 0xad, 0x57, 0xe8, 0x33, 0x07,
++      0xc0, 0x5d, 0x77, 0x40, 0xaf, 0x1c, 0x92, 0x92, 0x0b, 0x7b, 0x3d, 0x7c,
++      0x3b, 0xe6, 0x3c, 0x2e, 0x2a, 0xde, 0x30, 0xbc, 0x17, 0xd7, 0x7b, 0x94,
++      0xef, 0x52, 0x1a, 0xfe, 0x90, 0xe4, 0xa6, 0x69, 0xd3, 0x7e, 0x5f, 0x66,
++      0x60, 0x5b, 0x4b, 0xc3, 0x77, 0x82, 0x3e, 0xde, 0x43, 0x27, 0x7a, 0x43,
++      0x8c, 0x51, 0xe0, 0xef, 0x71, 0x13, 0x9b, 0x39, 0x80, 0xfb, 0x3d, 0xa8,
++      0xf3, 0x49, 0x53, 0xa7, 0x1b, 0x75, 0x06, 0x5b, 0xea, 0x70, 0xbc, 0xfb,
++      0x50, 0x07, 0xf6, 0x14, 0x56, 0xd2, 0xf6, 0x0e, 0xe2, 0x37, 0x81, 0x67,
++      0xf7, 0xe2, 0xd9, 0x3d, 0x78, 0x76, 0x0f, 0xee, 0x7f, 0xd7, 0xc4, 0x3c,
++      0xc2, 0x36, 0xdd, 0xb8, 0xff, 0x12, 0xde, 0x43, 0xc7, 0xb9, 0xdf, 0xc6,
++      0xfb, 0xfb, 0xf0, 0x1b, 0x6b, 0xa9, 0xe3, 0xb6, 0xdc, 0x9f, 0x76, 0x74,
++      0x8c, 0x84, 0xcf, 0x82, 0xc8, 0xce, 0xf5, 0x7f, 0x35, 0xcf, 0xbd, 0xa6,
++      0xf7, 0x1f, 0x37, 0xd7, 0xad, 0xb2, 0x94, 0x86, 0x2c, 0xf1, 0xfd, 0x57,
++      0xf6, 0xe9, 0xb5, 0xb8, 0x43, 0xc7, 0x1f, 0x6e, 0xc2, 0x1b, 0x4a, 0xfc,
++      0x71, 0xbd, 0x09, 0x9c, 0x41, 0xec, 0xd1, 0x8c, 0x3b, 0x48, 0x8b, 0xab,
++      0xe4, 0xf5, 0xe5, 0xe5, 0xd7, 0xba, 0xf5, 0x18, 0x62, 0xd5, 0x21, 0x73,
++      0x13, 0x2a, 0x16, 0xf1, 0x33, 0xf3, 0xcc, 0xdb, 0xb7, 0xf3, 0x6e, 0xaf,
++      0x4c, 0x54, 0xff, 0x68, 0xdf, 0x0e, 0x6d, 0x93, 0x4d, 0xd7, 0x3b, 0x98,
++      0x02, 0xfe, 0x84, 0xbd, 0x83, 0x77, 0x72, 0xf6, 0x5c, 0xa3, 0x68, 0xeb,
++      0x71, 0x59, 0x07, 0xef, 0x1a, 0x9b, 0x3d, 0x8e, 0x92, 0xfd, 0x9c, 0x4d,
++      0x5f, 0xa3, 0xbc, 0xc6, 0xeb, 0xdb, 0x51, 0x36, 0xb7, 0xed, 0x87, 0x1e,
++      0xcf, 0xd9, 0x9a, 0xee, 0xd6, 0xf6, 0xe1, 0xbe, 0xf1, 0x65, 0xa1, 0x0a,
++      0x99, 0xf3, 0x52, 0xc3, 0x65, 0xac, 0xdd, 0xac, 0x9f, 0x9a, 0xa6, 0x4c,
++      0xc2, 0x9f, 0xfd, 0x94, 0xc8, 0xa4, 0xcc, 0x57, 0x1f, 0x06, 0xfe, 0x0e,
++      0xe4, 0x21, 0xe0, 0x8a, 0x7f, 0x0f, 0x5c, 0x52, 0x83, 0xac, 0xd7, 0x1a,
++      0x1e, 0x7e, 0xfd, 0xf2, 0x57, 0x95, 0x84, 0x3c, 0x07, 0x7f, 0x02, 0xb2,
++      0x06, 0x3d, 0x9c, 0x76, 0x1f, 0x12, 0xe9, 0xb1, 0xe5, 0xf2, 0xbd, 0xb6,
++      0x8c, 0x24, 0x07, 0xac, 0x74, 0x02, 0x3f, 0xb7, 0x0d, 0xbf, 0x22, 0x7c,
++      0xb8, 0xb5, 0x06, 0x63, 0x01, 0x71, 0xf9, 0xeb, 0xf5, 0x24, 0x7e, 0x7d,
++      0xf2, 0x37, 0xeb, 0x1c, 0x7f, 0xc0, 0x94, 0x6a, 0x1f, 0xc3, 0xe7, 0x28,
++      0xcb, 0x62, 0x26, 0x21, 0x0b, 0x95, 0xe0, 0xa4, 0xf6, 0x99, 0x3d, 0xf8,
++      0xc8, 0xdc, 0xb3, 0x2f, 0x60, 0xcf, 0xe2, 0xb9, 0xc2, 0x9e, 0xa1, 0xdd,
++      0x7b, 0x01, 0x76, 0x2f, 0x5c, 0x23, 0xce, 0xb3, 0x75, 0x7d, 0xd8, 0x2f,
++      0xd7, 0x88, 0x7a, 0x9d, 0xba, 0x3c, 0x06, 0xfc, 0x10, 0xea, 0x76, 0xea,
++      0x08, 0x6f, 0xdb, 0x0f, 0x7d, 0xe4, 0x60, 0x17, 0xb0, 0x86, 0xc4, 0xe2,
++      0xd9, 0x9f, 0xca, 0xca, 0x59, 0xee, 0x1b, 0xda, 0xe3, 0xbb, 0x21, 0x6f,
++      0xa9, 0xaf, 0x96, 0x89, 0x99, 0xbd, 0x0c, 0xf8, 0x51, 0x96, 0xe9, 0x83,
++      0xab, 0xbd, 0x5a, 0x4e, 0x26, 0xc5, 0x39, 0xfb, 0x85, 0xa8, 0x74, 0x9f,
++      0x94, 0x45, 0x1f, 0x7e, 0xa9, 0x5d, 0x0e, 0x22, 0x9e, 0x97, 0x28, 0x28,
++      0xbf, 0x69, 0x05, 0x74, 0xc6, 0x64, 0xe2, 0x2c, 0xeb, 0x9c, 0x84, 0x8c,
++      0xb5, 0x81, 0xe6, 0x76, 0x39, 0x15, 0x4f, 0x95, 0x0b, 0xf0, 0xf7, 0x6d,
++      0xaf, 0x47, 0x06, 0xea, 0x2c, 0x89, 0x41, 0xfe, 0x37, 0xe4, 0x87, 0xd7,
++      0xf0, 0x03, 0x57, 0xf9, 0x7c, 0x00, 0x25, 0x9f, 0x7b, 0xd0, 0x2f, 0xe4,
++      0x07, 0x70, 0xc3, 0xc5, 0xb2, 0x9c, 0xca, 0x4c, 0x4a, 0xbd, 0x2a, 0xd6,
++      0x42, 0x06, 0x7b, 0xa0, 0x96, 0x95, 0x3a, 0x78, 0x51, 0x6a, 0x1c, 0x87,
++      0xdf, 0xf9, 0x26, 0xca, 0x39, 0x94, 0xd7, 0x51, 0x3e, 0x8e, 0xf2, 0x2d,
++      0x94, 0xa4, 0xfd, 0xb8, 0xd4, 0x6b, 0x7b, 0xda, 0xa4, 0x93, 0x7d, 0x6c,
++      0x18, 0x9a, 0xe1, 0x3b, 0x1e, 0x3c, 0x0e, 0x2c, 0x1a, 0x3e, 0x3f, 0x2e,
++      0x52, 0xff, 0x0c, 0x7e, 0x0f, 0xaa, 0x7b, 0xfa, 0x96, 0x0b, 0x99, 0x71,
++      0xe0, 0x7a, 0xb1, 0x4e, 0x65, 0x1e, 0x37, 0xfd, 0x7c, 0x06, 0xe3, 0x5d,
++      0xc5, 0xd8, 0x31, 0xc8, 0x48, 0x20, 0x8f, 0xf8, 0x27, 0xe5, 0x73, 0xfe,
++      0x7e, 0x19, 0xeb, 0x8d, 0x95, 0x63, 0x59, 0xce, 0x9f, 0x7a, 0x6a, 0xb7,
++      0xf9, 0x87, 0xf3, 0xe6, 0x9c, 0xa1, 0x5b, 0x97, 0xf6, 0x6a, 0xdc, 0x6d,
++      0x7f, 0x39, 0xaa, 0x69, 0xb1, 0x64, 0x60, 0x88, 0xfd, 0x65, 0x25, 0x72,
++      0x76, 0xc8, 0xcd, 0xd8, 0x23, 0xf0, 0x52, 0xd2, 0xf8, 0x9d, 0x84, 0xfc,
++      0x79, 0xa7, 0x07, 0xec, 0xdb, 0x40, 0x13, 0xde, 0xd5, 0x39, 0x0e, 0xec,
++      0xe9, 0x3d, 0xaf, 0x62, 0x6e, 0x65, 0x69, 0xbf, 0x27, 0x2b, 0x37, 0x1a,
++      0xbc, 0x86, 0x3d, 0xba, 0x30, 0x29, 0xff, 0x5c, 0xbd, 0x2a, 0x4f, 0x54,
++      0x27, 0xe5, 0x0d, 0x94, 0x8b, 0xd5, 0x32, 0xf8, 0xc8, 0x58, 0x3c, 0xfb,
++      0x08, 0xb0, 0x2e, 0x83, 0xf0, 0x8d, 0x3e, 0x98, 0x98, 0xc3, 0xfa, 0xcd,
++      0xb8, 0x81, 0x9c, 0xf3, 0xcb, 0x72, 0x6e, 0x1c, 0x6d, 0x6a, 0x1d, 0x12,
++      0x7d, 0x96, 0xf3, 0xed, 0x96, 0x02, 0x2c, 0x7a, 0x31, 0x43, 0x9d, 0xd9,
++      0x29, 0x85, 0x5a, 0xab, 0xdc, 0x51, 0xde, 0xde, 0xb6, 0xea, 0xdb, 0x3a,
++      0x60, 0xd3, 0xfa, 0x66, 0x83, 0x36, 0x78, 0x37, 0x7b, 0xaa, 0xe5, 0xae,
++      0x5e, 0xa3, 0x4d, 0xdd, 0x91, 0xbd, 0x3a, 0xfc, 0xb9, 0x7a, 0xf5, 0xba,
++      0x91, 0x3f, 0x25, 0xb7, 0x58, 0x17, 0x62, 0xf1, 0x9f, 0x08, 0xb0, 0x1f,
++      0x78, 0x14, 0xc6, 0x09, 0xb5, 0x7f, 0x54, 0x03, 0xad, 0x85, 0x38, 0x71,
++      0x06, 0xac, 0x5b, 0xed, 0x0b, 0x8a, 0x57, 0xde, 0xd9, 0x7e, 0xa9, 0x2e,
++      0x93, 0xbf, 0x29, 0xd7, 0xb6, 0x95, 0x4f, 0x02, 0xbe, 0x7a, 0x58, 0x9f,
++      0xf0, 0x7d, 0x0a, 0x7e, 0xd2, 0x49, 0x71, 0xc7, 0x3a, 0x31, 0x27, 0x5e,
++      0x8b, 0x4c, 0x5f, 0x6c, 0xc5, 0x91, 0xa1, 0x9d, 0x68, 0x83, 0x3f, 0x1e,
++      0xc5, 0x5a, 0x76, 0xc1, 0x9f, 0x86, 0x9f, 0x0a, 0x39, 0xfa, 0x33, 0x60,
++      0xaf, 0xd3, 0xca, 0xb7, 0xe6, 0x9e, 0xea, 0x9e, 0x1a, 0x58, 0x67, 0xb9,
++      0x77, 0x2a, 0x5d, 0x63, 0x19, 0x9f, 0xd2, 0xbe, 0x64, 0x62, 0x4a, 0xc7,
++      0xed, 0x93, 0x53, 0x07, 0x54, 0xe9, 0x4d, 0x0d, 0xab, 0x72, 0x78, 0x6a,
++      0x27, 0x66, 0x42, 0x9e, 0x8a, 0x95, 0xcf, 0x64, 0xa4, 0x58, 0x21, 0x8d,
++      0xe2, 0x1c, 0x83, 0x3c, 0xcd, 0x01, 0xcb, 0xe4, 0x2b, 0xbe, 0x9c, 0xda,
++      0xc8, 0x82, 0x66, 0xe8, 0x99, 0xac, 0x8f, 0x52, 0xcc, 0x5f, 0xd8, 0xb6,
++      0x8d, 0x31, 0x32, 0xae, 0x99, 0xf1, 0x33, 0x7d, 0xfa, 0x99, 0xcd, 0x7f,
++      0xec, 0x0f, 0xb2, 0x49, 0xfb, 0xf9, 0x0b, 0xf8, 0xc6, 0xe2, 0x94, 0x32,
++      0x6c, 0xeb, 0xc3, 0x07, 0x17, 0xd9, 0x5a, 0x91, 0x58, 0x2c, 0xfb, 0x1d,
++      0x89, 0x3d, 0x1d, 0x04, 0x3f, 0xf0, 0x53, 0x47, 0xca, 0x02, 0x5e, 0x59,
++      0x78, 0xbe, 0xce, 0x77, 0xd4, 0x4d, 0x23, 0xee, 0x0d, 0xc8, 0x5c, 0xee,
++      0xa8, 0xc8, 0x2b, 0x78, 0x56, 0x5f, 0xe1, 0x1a, 0x7c, 0x17, 0x6b, 0x60,
++      0xd6, 0x44, 0x3d, 0x63, 0x3d, 0xf8, 0x58, 0x71, 0xce, 0x63, 0xc4, 0x6d,
++      0x47, 0xfb, 0xda, 0x3a, 0xdb, 0xa4, 0xc6, 0x79, 0xe4, 0xf5, 0xca, 0xba,
++      0x9e, 0xdf, 0xe1, 0xcc, 0xb0, 0x5c, 0xae, 0xa8, 0x3e, 0x20, 0xeb, 0xbf,
++      0x44, 0x9b, 0x4d, 0xc8, 0x2d, 0x63, 0x53, 0x59, 0x99, 0x07, 0x4e, 0x9b,
++      0xaf, 0xa4, 0x21, 0x3b, 0x8e, 0xcc, 0x24, 0x48, 0xb6, 0x27, 0x5b, 0x95,
++      0x37, 0xdb, 0x88, 0x85, 0xf3, 0x1e, 0xaf, 0xc7, 0x51, 0x67, 0x5a, 0x88,
++      0xb7, 0xf2, 0x19, 0xce, 0xa9, 0x99, 0x17, 0xfa, 0xaf, 0x84, 0xb5, 0x30,
++      0x73, 0x54, 0x7f, 0x7a, 0x1c, 0xb4, 0x37, 0xe3, 0x14, 0x01, 0x53, 0xe0,
++      0x6b, 0x4a, 0xfa, 0x82, 0xe3, 0xe4, 0x2b, 0x8e, 0x0c, 0x5c, 0xc0, 0xb6,
++      0xca, 0x1a, 0x5e, 0x34, 0x42, 0x59, 0x0b, 0x31, 0x10, 0x65, 0x8b, 0x3c,
++      0x48, 0x95, 0x37, 0xc1, 0xec, 0xde, 0xec, 0x35, 0x79, 0x74, 0x55, 0xcf,
++      0xd9, 0x3e, 0x2f, 0x3c, 0x0b, 0x91, 0x1b, 0x2b, 0x29, 0xff, 0x3a, 0xf4,
++      0x7d, 0x21, 0xee, 0x43, 0x56, 0xfe, 0x4b, 0x1b, 0xf6, 0xf4, 0x78, 0xce,
++      0xde, 0xdf, 0xae, 0x6d, 0xac, 0x83, 0x3d, 0x01, 0xac, 0x59, 0xc9, 0xa1,
++      0x4d, 0xbb, 0xfc, 0x5b, 0x07, 0xd7, 0xc4, 0x9e, 0x78, 0x66, 0xec, 0x22,
++      0xae, 0x75, 0x7f, 0xf3, 0x98, 0x87, 0x8e, 0x03, 0x5b, 0xf2, 0x28, 0x2c,
++      0x88, 0xa0, 0xff, 0x01, 0x33, 0xd6, 0xc0, 0xf9, 0x50, 0x36, 0x40, 0xf7,
++      0x6a, 0x16, 0xf8, 0xdd, 0x31, 0x7e, 0x2b, 0x75, 0x8c, 0xec, 0xe2, 0xf7,
++      0x34, 0xc7, 0x5e, 0x63, 0x2a, 0x4e, 0x47, 0x2c, 0x47, 0xd9, 0x3a, 0x62,
++      0x64, 0xeb, 0x33, 0x90, 0xad, 0xe3, 0x4a, 0xb6, 0x02, 0xf9, 0x81, 0xef,
++      0xcb, 0x97, 0x77, 0x95, 0xaf, 0xd6, 0xbf, 0x2e, 0xd0, 0xcb, 0x5f, 0x9f,
++      0x2c, 0xfc, 0x05, 0xc6, 0xbd, 0xe0, 0xe2, 0x3a, 0x95, 0x9b, 0x11, 0xf2,
++      0x31, 0x81, 0xeb, 0x18, 0xca, 0x7e, 0x55, 0x67, 0xe0, 0x02, 0xec, 0x1a,
++      0xe4, 0x8d, 0xfc, 0x9d, 0x87, 0x8d, 0x1b, 0xb8, 0x10, 0x85, 0x2d, 0xe4,
++      0x9e, 0x95, 0x5e, 0x1b, 0xba, 0x81, 0xf5, 0xeb, 0xd8, 0x3b, 0x03, 0x17,
++      0xba, 0x50, 0x26, 0x55, 0x5f, 0xf5, 0x8a, 0xa7, 0xda, 0xd7, 0x2b, 0xc3,
++      0xaa, 0x5d, 0xbd, 0x32, 0x8a, 0x12, 0xfa, 0x3d, 0xe3, 0xcb, 0xd0, 0x85,
++      0x8c, 0x24, 0x2f, 0x58, 0x52, 0x9a, 0x0e, 0x82, 0x18, 0x68, 0x1f, 0xbe,
++      0xd0, 0x23, 0xd7, 0xa7, 0x39, 0x37, 0xea, 0x62, 0xb1, 0x16, 0x33, 0xd3,
++      0xd8, 0x9b, 0xe4, 0x1f, 0xb0, 0xfe, 0x85, 0x22, 0x6c, 0x6e, 0x51, 0x4e,
++      0xad, 0x90, 0x3f, 0x8c, 0xb5, 0x6f, 0x25, 0x22, 0x92, 0x82, 0x2e, 0x3b,
++      0x2a, 0x73, 0xd5, 0x76, 0xe8, 0x32, 0xc7, 0xad, 0xcb, 0x13, 0x58, 0xa3,
++      0x41, 0xca, 0x03, 0xf8, 0x92, 0x45, 0xdf, 0x45, 0x29, 0xa0, 0x4d, 0x71,
++      0x65, 0xa7, 0x7e, 0x49, 0xda, 0xb1, 0xa7, 0x8e, 0xca, 0xb1, 0x2a, 0xfb,
++      0x71, 0xdc, 0x79, 0x39, 0x00, 0x19, 0xf2, 0xdc, 0x09, 0xf4, 0x03, 0x1b,
++      0xd9, 0xf4, 0xc7, 0xfd, 0x97, 0x7b, 0x0f, 0x99, 0x0c, 0xf7, 0x5d, 0xac,
++      0xdc, 0x96, 0x9d, 0xb6, 0xb6, 0x32, 0xe2, 0xcc, 0x66, 0x1e, 0xb2, 0x5e,
++      0xc9, 0x64, 0xac, 0x2b, 0x99, 0x9c, 0x75, 0x35, 0x53, 0xb4, 0xae, 0xc1,
++      0x36, 0xd5, 0x37, 0xde, 0x81, 0xfc, 0x00, 0x4f, 0x10, 0x7b, 0x6f, 0xaf,
++      0x61, 0xdc, 0xf8, 0x39, 0x6f, 0xc9, 0xb9, 0x0a, 0xed, 0x74, 0x70, 0x68,
++      0xd6, 0x2f, 0xdf, 0x0e, 0xfa, 0x40, 0x07, 0xe3, 0x11, 0x3b, 0xb6, 0x23,
++      0x9a, 0x1d, 0x06, 0x4e, 0xa0, 0xed, 0xe8, 0xa2, 0xed, 0xf0, 0x0b, 0xb2,
++      0x57, 0xb6, 0xaa, 0x3a, 0x2e, 0x97, 0x07, 0x6e, 0xda, 0xaa, 0xc5, 0xe5,
++      0xcb, 0xcb, 0xa1, 0x2c, 0x71, 0xbe, 0xf3, 0xef, 0xeb, 0x90, 0x88, 0x1c,
++      0x51, 0xf6, 0xba, 0x5b, 0x2e, 0xaf, 0x03, 0xd3, 0x02, 0x81, 0xd8, 0x77,
++      0x32, 0xce, 0x63, 0xab, 0xf8, 0x85, 0xf4, 0xf0, 0x3c, 0xf0, 0x1f, 0xc0,
++      0x2b, 0x9e, 0xd9, 0x61, 0x9e, 0x3d, 0x9c, 0x51, 0x78, 0x3f, 0x8a, 0x3d,
++      0xc9, 0x6b, 0x4b, 0x0a, 0xc0, 0xed, 0x5b, 0x15, 0x96, 0x09, 0x94, 0x26,
++      0x56, 0x0f, 0x5d, 0x10, 0xc9, 0xfe, 0xa3, 0x7a, 0xdf, 0xee, 0x89, 0x35,
++      0x0b, 0x3b, 0x5c, 0x5a, 0xa1, 0x4c, 0xa3, 0x5c, 0xd7, 0x63, 0x17, 0x7c,
++      0x60, 0xe6, 0xd1, 0x0e, 0xda, 0x37, 0xe0, 0x27, 0xec, 0x7b, 0x85, 0xed,
++      0x33, 0xd8, 0x73, 0x3f, 0x68, 0xa7, 0x6d, 0x3f, 0xec, 0x8f, 0xcb, 0xb5,
++      0x0a, 0xaf, 0xf9, 0x3e, 0xe5, 0x8b, 0x8a, 0x1b, 0xc7, 0xa6, 0x16, 0x3d,
++      0xdf, 0xec, 0x31, 0x15, 0xd3, 0xb1, 0x3e, 0x06, 0xcc, 0x38, 0x70, 0xa6,
++      0x4d, 0xd2, 0x4f, 0xdb, 0x7d, 0xfa, 0x7c, 0xe5, 0x90, 0x14, 0xfd, 0x03,
++      0x98, 0xc3, 0x3e, 0x99, 0x87, 0x2f, 0xb6, 0xb0, 0x31, 0x2c, 0xf3, 0xc3,
++      0xf0, 0xb9, 0xdd, 0xbb, 0x89, 0xd5, 0xf0, 0xeb, 0xc0, 0xf3, 0x41, 0x94,
++      0xed, 0x28, 0x6f, 0x97, 0xf9, 0xa7, 0xba, 0x63, 0xba, 0xbf, 0x68, 0xcb,
++      0xfd, 0xb3, 0x1c, 0x3b, 0x99, 0xb4, 0x7e, 0x15, 0x2e, 0x6c, 0xc6, 0x84,
++      0xa4, 0x23, 0x2a, 0xde, 0x93, 0x5d, 0x32, 0x78, 0xc6, 0x95, 0xa1, 0x33,
++      0x09, 0x39, 0x70, 0xa6, 0x5f, 0x86, 0xcf, 0x24, 0xe5, 0xce, 0x33, 0x21,
++      0xfe, 0xea, 0x9e, 0x4a, 0x1b, 0x5b, 0xe1, 0xfd, 0x9a, 0xb6, 0xe2, 0xce,
++      0x86, 0xc6, 0xa8, 0xf3, 0x6b, 0xc4, 0x74, 0xaf, 0x62, 0xef, 0x6e, 0xaa,
++      0xf3, 0xca, 0x4b, 0x1b, 0x41, 0x70, 0xc9, 0x6f, 0x77, 0xa7, 0x85, 0xfc,
++      0xce, 0x00, 0x9f, 0xf9, 0xd0, 0x61, 0xa3, 0xd0, 0x61, 0xe3, 0xca, 0x36,
++      0xd6, 0xbf, 0x2e, 0xd6, 0xb1, 0xcc, 0x03, 0xb2, 0x06, 0xd9, 0x7e, 0xd0,
++      0x4f, 0x7d, 0x75, 0x53, 0xf1, 0x47, 0x62, 0x3d, 0xd0, 0x67, 0x77, 0xaf,
++      0xb6, 0xcb, 0x1b, 0xf1, 0x20, 0x38, 0x0b, 0x1d, 0x50, 0xaf, 0x68, 0xf9,
++      0xcd, 0x7b, 0xd4, 0x05, 0x0f, 0x61, 0xfe, 0xa3, 0x78, 0x96, 0x33, 0xba,
++      0xbd, 0x43, 0x6e, 0xc4, 0x13, 0xb2, 0x7e, 0x60, 0xbc, 0xa5, 0x5e, 0x06,
++      0xf7, 0xc0, 0x3d, 0x8d, 0xdf, 0x23, 0xbf, 0xf0, 0xdc, 0x95, 0x73, 0xf0,
++      0x99, 0xcf, 0x1f, 0x48, 0x8d, 0x27, 0x6d, 0xea, 0xc3, 0xa4, 0xd4, 0xbe,
++      0x9e, 0x90, 0xb5, 0x65, 0x6d, 0x97, 0x66, 0xbd, 0x71, 0x29, 0x00, 0xfb,
++      0xae, 0x2d, 0x67, 0x51, 0xb2, 0x7e, 0xa8, 0x73, 0xb4, 0x5c, 0x16, 0x33,
++      0x79, 0xec, 0x63, 0xee, 0x0f, 0x6d, 0x77, 0x6c, 0xbb, 0x1d, 0x72, 0xc4,
++      0x3d, 0xf1, 0x30, 0x9e, 0xe7, 0xb1, 0xaf, 0x69, 0xc7, 0xd3, 0x90, 0xaf,
++      0xcf, 0xc6, 0x28, 0x1f, 0x05, 0x9f, 0xf8, 0x9a, 0x6d, 0x52, 0x89, 0x34,
++      0x9e, 0x4f, 0x4b, 0x5a, 0x9d, 0x0b, 0xcd, 0xfa, 0x61, 0x7f, 0x59, 0xa3,
++      0x17, 0x22, 0x8c, 0x81, 0xe1, 0xef, 0x64, 0x8c, 0xf2, 0x18, 0xf1, 0xc2,
++      0xe7, 0x23, 0xb0, 0x3d, 0x51, 0x35, 0xc6, 0xfc, 0x32, 0x9f, 0xa5, 0x5d,
++      0xb6, 0x2f, 0xf8, 0xbc, 0x17, 0xf9, 0x44, 0x83, 0xf1, 0x9a, 0x98, 0x3c,
++      0xda, 0xe8, 0x02, 0xbd, 0x6d, 0xbf, 0xc2, 0xf6, 0xec, 0xec, 0x73, 0x3b,
++      0xbb, 0x95, 0x70, 0x95, 0x6e, 0xa1, 0x1e, 0xa1, 0x0e, 0x69, 0x17, 0x67,
++      0x8c, 0xfb, 0x0c, 0x6b, 0xb2, 0x8c, 0x35, 0x5a, 0xc6, 0x1a, 0x2d, 0x63,
++      0x8d, 0x96, 0xb1, 0x7e, 0xcb, 0xd4, 0x2d, 0x83, 0xd8, 0xcf, 0x39, 0x73,
++      0x86, 0x40, 0xfd, 0xf2, 0x1c, 0xd6, 0x76, 0x5a, 0xfe, 0x76, 0x63, 0x52,
++      0xfe, 0xf3, 0xc6, 0x11, 0xe0, 0xee, 0x22, 0xd6, 0x35, 0x87, 0x75, 0xcd,
++      0x62, 0x5d, 0x8f, 0x62, 0x5d, 0xc7, 0x55, 0xcc, 0xb3, 0x5a, 0x49, 0x5d,
++      0x2a, 0x2b, 0x8c, 0xff, 0x16, 0xe4, 0x61, 0x4c, 0x9c, 0xd5, 0x7e, 0xe8,
++      0x8b, 0x72, 0x10, 0xf7, 0x82, 0x43, 0xc0, 0xd6, 0x18, 0xbb, 0x9c, 0x72,
++      0x94, 0xee, 0xf3, 0xdc, 0xcf, 0x63, 0xaf, 0xbc, 0x2f, 0x9b, 0xaa, 0x52,
++      0x75, 0x9d, 0xab, 0x0e, 0x4b, 0xe9, 0x22, 0xea, 0x9f, 0xed, 0x02, 0xad,
++      0xc4, 0x7c, 0xa9, 0xd3, 0x25, 0xd9, 0x84, 0xbe, 0xcb, 0x81, 0xc6, 0x0f,
++      0xc9, 0x7c, 0x3c, 0xf5, 0x9c, 0xc8, 0xb8, 0xdc, 0x03, 0x3f, 0x9d, 0xf1,
++      0xcc, 0x9c, 0x8a, 0xb1, 0xe1, 0xfa, 0x62, 0x16, 0xfe, 0x36, 0x6d, 0xec,
++      0x3e, 0xe3, 0x87, 0x6b, 0x1c, 0x5b, 0x13, 0x8e, 0xcb, 0xf1, 0xfe, 0x58,
++      0xe6, 0x80, 0x15, 0xe1, 0xeb, 0x03, 0x8b, 0x78, 0x09, 0x8c, 0x19, 0x9b,
++      0xbd, 0xe8, 0xc6, 0xe6, 0x2e, 0xb2, 0x9f, 0x98, 0x44, 0x96, 0xa8, 0xb3,
++      0xd8, 0x0f, 0x74, 0x3b, 0xfa, 0x4e, 0xab, 0x33, 0xb3, 0x11, 0xb4, 0xfb,
++      0x5d, 0xe0, 0x4c, 0xcd, 0xc7, 0xfc, 0x59, 0x6d, 0xf7, 0xf2, 0xf5, 0x66,
++      0xac, 0x07, 0xdd, 0x02, 0xbb, 0x98, 0xab, 0x6b, 0xdc, 0x56, 0x54, 0xb8,
++      0x4e, 0x63, 0xba, 0xa3, 0x72, 0xa8, 0x43, 0x3a, 0x3d, 0x35, 0x9f, 0xc8,
++      0xd9, 0x4d, 0xe2, 0x58, 0x8c, 0xc1, 0x36, 0xd1, 0x26, 0xba, 0x33, 0xb0,
++      0xa7, 0xb7, 0x77, 0x50, 0x66, 0x3e, 0x09, 0xdc, 0x38, 0xb0, 0xa4, 0xcf,
++      0x98, 0x06, 0x2e, 0xfa, 0x98, 0x8f, 0xf4, 0x31, 0xb2, 0x69, 0x63, 0x0e,
++      0x1f, 0x55, 0x76, 0x79, 0x0c, 0xb6, 0xd8, 0x85, 0xac, 0x53, 0xe7, 0xf4,
++      0x61, 0xff, 0xf0, 0x9e, 0xba, 0x87, 0x7a, 0x8c, 0x32, 0x13, 0x07, 0x6e,
++      0x82, 0xfe, 0xe9, 0xee, 0x97, 0xda, 0x06, 0xdf, 0xf5, 0x2b, 0x1d, 0xed,
++      0x60, 0x0d, 0x16, 0x2b, 0xc1, 0xa1, 0xbc, 0x5f, 0x86, 0x16, 0x25, 0xcf,
++      0xc9, 0x0f, 0xf2, 0x7d, 0x14, 0xb4, 0x91, 0xc7, 0xdd, 0x65, 0x7d, 0x6e,
++      0xb9, 0x57, 0x4a, 0x55, 0xea, 0x69, 0x94, 0xb5, 0xbd, 0xf0, 0x9d, 0x5c,
++      0x85, 0x65, 0x73, 0xd3, 0x9c, 0x7b, 0xac, 0xec, 0x42, 0x6e, 0xdd, 0x83,
++      0x93, 0x2a, 0xa6, 0x72, 0x79, 0x29, 0xe5, 0xd7, 0x6c, 0x8c, 0x09, 0x9d,
++      0x69, 0x9f, 0x1f, 0x93, 0xb9, 0x95, 0x6e, 0x19, 0x5c, 0xe5, 0xf9, 0xf2,
++      0x50, 0x4c, 0xba, 0x83, 0xe0, 0x9c, 0x9f, 0x57, 0xb1, 0xc7, 0x81, 0x55,
++      0x60, 0x82, 0xa3, 0x9a, 0x77, 0x9c, 0x2f, 0x74, 0xc4, 0xbf, 0x82, 0x8f,
++      0xef, 0x8e, 0x8f, 0x8b, 0xbb, 0xe0, 0xe3, 0x57, 0x2f, 0x42, 0xfe, 0x96,
++      0x21, 0x9b, 0xcb, 0x90, 0xcd, 0x65, 0xc8, 0xe6, 0x32, 0x64, 0x73, 0x19,
++      0xb2, 0x89, 0xfd, 0xf3, 0xfc, 0xf2, 0xb8, 0xc1, 0x1f, 0x9f, 0x82, 0x2c,
++      0x7f, 0xdb, 0xe0, 0x8f, 0x51, 0xc8, 0x70, 0x12, 0xb2, 0xeb, 0x43, 0x6e,
++      0x87, 0x21, 0xcb, 0x1e, 0x64, 0xb9, 0x1f, 0x72, 0x9c, 0x50, 0xfe, 0xe3,
++      0x04, 0xb0, 0xe8, 0x83, 0xf0, 0x41, 0xce, 0x57, 0xfb, 0x65, 0x51, 0xd1,
++      0x12, 0xc8, 0x96, 0xbf, 0x49, 0x1e, 0x62, 0x5f, 0xd0, 0x3f, 0x77, 0xe5,
++      0xfc, 0x5a, 0x48, 0xdb, 0xab, 0xf2, 0xcd, 0xca, 0x6b, 0xf2, 0x42, 0x85,
++      0x34, 0xe6, 0x64, 0x11, 0xef, 0xd6, 0x9e, 0xa2, 0x1f, 0xa9, 0xe8, 0x83,
++      0xcc, 0x9d, 0x94, 0xff, 0x03, 0x5e, 0xae, 0x6f, 0x7c, 0x58, 0x3e, 0xe7,
++      0x52, 0x86, 0xe3, 0xd0, 0x35, 0xb8, 0x3f, 0x40, 0xbd, 0x04, 0x3f, 0xb4,
++      0x92, 0x2a, 0x97, 0xa0, 0x27, 0xaa, 0xf6, 0x08, 0x30, 0x58, 0x39, 0xe8,
++      0xa1, 0x0e, 0xab, 0x7a, 0xee, 0x80, 0x4d, 0xde, 0xec, 0x87, 0xbc, 0xa4,
++      0xbe, 0x0a, 0xe1, 0xc5, 0x33, 0xda, 0x73, 0x94, 0x35, 0xe8, 0xcf, 0xa7,
++      0xc8, 0x47, 0xfa, 0xb5, 0xb8, 0x56, 0xba, 0xf7, 0x27, 0x2a, 0x7e, 0x5c,
++      0x9a, 0x86, 0x2f, 0xbf, 0x46, 0x3e, 0x41, 0x56, 0x9e, 0x22, 0x1f, 0x49,
++      0x9f, 0xe6, 0xe3, 0x23, 0x12, 0xf2, 0x90, 0xef, 0x5a, 0x79, 0x08, 0x27,
++      0xaa, 0x33, 0x8e, 0xb9, 0x7f, 0x2d, 0x66, 0x62, 0xc8, 0xc6, 0x26, 0xbf,
++      0x2a, 0xd3, 0x0d, 0xce, 0xc7, 0x92, 0xdb, 0xbc, 0xab, 0xf0, 0xa9, 0x38,
++      0xf6, 0xab, 0xc1, 0xa3, 0x71, 0xce, 0x81, 0xeb, 0xba, 0x47, 0xea, 0x7d,
++      0xbe, 0x89, 0xaf, 0xfc, 0x2a, 0x5b, 0xc4, 0x7a, 0xe0, 0x3b, 0xf4, 0xcb,
++      0x0b, 0xcb, 0xe0, 0x37, 0xfc, 0xae, 0x6f, 0xc0, 0xef, 0x62, 0x9c, 0x53,
++      0xaf, 0xcf, 0xb8, 0x89, 0xd9, 0xb6, 0xc6, 0x6a, 0x93, 0x58, 0x23, 0xfa,
++      0xed, 0xa9, 0xf2, 0x75, 0xe8, 0xc1, 0xe7, 0x7d, 0xc6, 0xf8, 0x02, 0xf9,
++      0xef, 0x7e, 0xb3, 0xa6, 0x53, 0xf1, 0x6d, 0x79, 0x04, 0xba, 0xf1, 0x51,
++      0xe8, 0xc6, 0x4f, 0xdc, 0x92, 0xe7, 0x43, 0x79, 0xbb, 0x7f, 0x6a, 0x76,
++      0x65, 0xb0, 0x1c, 0xb1, 0xfb, 0x31, 0xa7, 0xe6, 0xb6, 0x8c, 0xf1, 0x25,
++      0x4d, 0x2c, 0xb6, 0x19, 0xb3, 0x86, 0xf1, 0x56, 0xca, 0x74, 0x20, 0xd7,
++      0xfc, 0x72, 0x57, 0x44, 0x9d, 0x3f, 0x7b, 0xb4, 0x13, 0xbb, 0xfc, 0xbd,
++      0xd8, 0xa1, 0xed, 0xf3, 0x5b, 0x46, 0xc6, 0x76, 0x72, 0x99, 0x26, 0x32,
++      0xe1, 0x99, 0x73, 0x37, 0x6c, 0x1e, 0xf7, 0x6d, 0x2a, 0x99, 0xc3, 0xde,
++      0x9e, 0xdf, 0xa0, 0x5d, 0x20, 0x9e, 0x6c, 0x63, 0x4c, 0x6f, 0xa6, 0x3d,
++      0xcb, 0xd8, 0x41, 0x37, 0xfc, 0x97, 0xd7, 0xe5, 0xdc, 0xca, 0x3f, 0x75,
++      0xe8, 0xfd, 0xa4, 0x73, 0xcf, 0xec, 0x8b, 0xad, 0x71, 0x54, 0xbd, 0x46,
++      0x85, 0x4c, 0x37, 0x30, 0x0c, 0xfd, 0xa5, 0x6b, 0xca, 0x5f, 0x3a, 0xec,
++      0x3b, 0xb2, 0x19, 0x67, 0x9f, 0xaf, 0xcb, 0xb1, 0x95, 0xe1, 0x4e, 0xc6,
++      0x2b, 0x17, 0x97, 0x0f, 0xc8, 0x96, 0xd2, 0x65, 0x0f, 0xa3, 0x6e, 0x16,
++      0x7b, 0x36, 0x08, 0x26, 0xfc, 0xb4, 0x7b, 0x5e, 0x46, 0x12, 0xe7, 0xc1,
++      0xd3, 0x3f, 0x43, 0x1b, 0xf8, 0xd4, 0x41, 0x11, 0xcf, 0xae, 0xc2, 0x6f,
++      0xbf, 0x21, 0xbc, 0x1e, 0x71, 0x4f, 0x43, 0x18, 0x72, 0x6e, 0xda, 0x7d,
++      0x4b, 0x42, 0xdb, 0x45, 0x3b, 0xc5, 0x33, 0xeb, 0x3e, 0x29, 0xac, 0x6b,
++      0x5a, 0xe7, 0x41, 0xeb, 0xa9, 0x15, 0x8e, 0xc1, 0x79, 0x91, 0xde, 0x7f,
++      0xe2, 0x19, 0x07, 0xe6, 0xf2, 0x41, 0x60, 0x59, 0xe2, 0x28, 0x1d, 0x8b,
++      0x28, 0xa0, 0x8d, 0xc2, 0x5a, 0x3e, 0xcf, 0x2b, 0xc9, 0xc7, 0x2f, 0xc2,
++      0x6f, 0x88, 0x43, 0x8e, 0xf1, 0x7c, 0xbd, 0x39, 0xe6, 0xcb, 0xfa, 0xfa,
++      0x1c, 0xed, 0x92, 0xf2, 0x11, 0xf2, 0xc0, 0x85, 0x93, 0xa8, 0xcb, 0x78,
++      0x67, 0x10, 0x1c, 0xf7, 0xe1, 0xc7, 0x3f, 0x45, 0xd9, 0xbb, 0x53, 0x4a,
++      0xca, 0xe7, 0x20, 0x86, 0x65, 0xfe, 0xc6, 0x96, 0x1b, 0xc3, 0xfe, 0x9c,
++      0x86, 0x6d, 0xcb, 0xc3, 0xb6, 0x45, 0xee, 0x3e, 0x02, 0x3c, 0xab, 0xce,
++      0xd9, 0x60, 0x3f, 0x39, 0xee, 0xc3, 0xd6, 0xdf, 0x67, 0x46, 0x81, 0x6f,
++      0x1f, 0x00, 0xbe, 0x65, 0x1e, 0x59, 0x1e, 0x18, 0x97, 0xf8, 0xd6, 0x95,
++      0xbf, 0xda, 0xc8, 0x43, 0xb7, 0x4d, 0x74, 0x52, 0x17, 0x1f, 0xd9, 0xb6,
++      0xd3, 0x45, 0x63, 0xc7, 0xf7, 0x49, 0x41, 0x9d, 0xbb, 0x15, 0x95, 0xbd,
++      0x9f, 0x5f, 0x27, 0xae, 0x87, 0xed, 0x5f, 0x87, 0xef, 0x57, 0xa1, 0x8f,
++      0x96, 0xc3, 0xfd, 0x03, 0xb8, 0x7f, 0x08, 0xe5, 0x11, 0x94, 0xda, 0xf7,
++      0xb9, 0xb4, 0x1c, 0xe9, 0xd4, 0x31, 0xde, 0x44, 0x93, 0xff, 0x43, 0x39,
++      0x8c, 0x4f, 0xcd, 0x56, 0xc3, 0x38, 0xfd, 0x21, 0x39, 0xee, 0xeb, 0xb3,
++      0xf5, 0x09, 0xf8, 0xeb, 0x9d, 0xc0, 0x60, 0x0f, 0x3d, 0x0d, 0x9b, 0x71,
++      0xdf, 0x21, 0xb1, 0xef, 0xb3, 0x64, 0x76, 0x14, 0x74, 0x8f, 0x0e, 0x42,
++      0x3f, 0xf7, 0xc3, 0xdf, 0x56, 0x7e, 0xb0, 0xc1, 0x9c, 0xd4, 0xfb, 0x71,
++      0xf9, 0xf3, 0x8d, 0x10, 0x7b, 0xb6, 0x01, 0xa7, 0x32, 0x56, 0x98, 0x54,
++      0xb8, 0xd9, 0xbe, 0x8d, 0xeb, 0xdf, 0x25, 0xf9, 0xdb, 0xc8, 0x53, 0x3e,
++      0x03, 0xa6, 0x51, 0xd7, 0x71, 0x49, 0x9f, 0xe1, 0xba, 0xb5, 0x9b, 0x18,
++      0x2f, 0x6d, 0x06, 0xcb, 0xbf, 0xec, 0xdc, 0xc6, 0x96, 0x8c, 0x01, 0x59,
++      0xe3, 0x9d, 0x3b, 0x79, 0x69, 0xa1, 0xdc, 0x87, 0xf9, 0x04, 0x94, 0xff,
++      0x4b, 0xa0, 0x9f, 0xf6, 0x9e, 0xb6, 0xc1, 0xb5, 0xa2, 0x07, 0x89, 0x05,
++      0x22, 0xd2, 0xe6, 0x71, 0x9f, 0xd2, 0x4e, 0x1d, 0xc1, 0x9c, 0x88, 0x0d,
++      0x3e, 0xdf, 0x2d, 0xdd, 0xc4, 0x07, 0x49, 0x3c, 0xbb, 0x8e, 0x7a, 0xbc,
++      0x67, 0x3d, 0xf8, 0x52, 0xcb, 0x62, 0x45, 0x0e, 0xce, 0x41, 0xae, 0x3d,
++      0x5c, 0x1f, 0x47, 0x39, 0x8c, 0xf2, 0x71, 0x94, 0xd4, 0x4f, 0x57, 0x65,
++      0x56, 0xc7, 0x7f, 0x14, 0x0e, 0xa1, 0xed, 0x9c, 0xf6, 0xa9, 0x53, 0x4f,
++      0x8a, 0x3d, 0xf6, 0x41, 0x3c, 0xa3, 0x1f, 0x8f, 0x91, 0xee, 0xff, 0x82,
++      0x89, 0x3f, 0x6d, 0xc7, 0xac, 0x8c, 0x4e, 0x5e, 0x51, 0x31, 0xfc, 0xf5,
++      0xa7, 0xe8, 0x23, 0xff, 0x54, 0x1e, 0xbd, 0x29, 0xb6, 0xb7, 0x1d, 0xcb,
++      0x1a, 0x2f, 0x28, 0x5d, 0x4c, 0x7e, 0x40, 0x0f, 0xbb, 0x19, 0xf9, 0xfa,
++      0x46, 0x0f, 0xf4, 0x5b, 0x5c, 0xde, 0x58, 0x09, 0x80, 0xd5, 0xb9, 0x37,
++      0x47, 0x60, 0x33, 0x5d, 0x83, 0x03, 0xe2, 0xf2, 0x2f, 0x90, 0xf3, 0x7f,
++      0xae, 0x24, 0xe4, 0xcd, 0x4a, 0x10, 0x5c, 0xf3, 0xd3, 0xfe, 0x61, 0x91,
++      0xbb, 0xdb, 0x74, 0x0e, 0x00, 0x6a, 0xe8, 0x73, 0xfb, 0x79, 0x75, 0x76,
++      0x8f, 0x7a, 0xd0, 0x3b, 0x6f, 0x36, 0x7e, 0x01, 0xbe, 0xea, 0x3e, 0x5b,
++      0xdb, 0x6e, 0xe9, 0xb6, 0x3c, 0xfb, 0x4f, 0x6c, 0x4a, 0xda, 0xe4, 0x10,
++      0xa4, 0xd1, 0x36, 0x3d, 0xbc, 0xb6, 0xdd, 0x9e, 0x6d, 0x33, 0xca, 0x5e,
++      0x94, 0xd6, 0x7b, 0xa5, 0xfe, 0x17, 0xdc, 0x2b, 0xf0, 0x63, 0xd5, 0x99,
++      0x11, 0x4b, 0x9e, 0x55, 0xb0, 0x4e, 0xd2, 0xbc, 0x1f, 0x30, 0xef, 0x3d,
++      0x85, 0x5f, 0x9d, 0xed, 0x18, 0x20, 0x7c, 0xdb, 0xe5, 0xd4, 0x69, 0x65,
++      0x47, 0x18, 0xb7, 0x5d, 0xa6, 0x7f, 0x4f, 0x5d, 0x3e, 0x69, 0xec, 0x09,
++      0x7c, 0x8f, 0xda, 0x71, 0x99, 0x51, 0xd7, 0x9f, 0x90, 0x47, 0x5c, 0xf2,
++      0xee, 0xa4, 0xf8, 0x63, 0x1a, 0x4b, 0x89, 0x89, 0x09, 0x76, 0x78, 0x27,
++      0xe1, 0x9b, 0x29, 0x7b, 0xec, 0x7e, 0x4c, 0xc8, 0xe3, 0x36, 0xda, 0x8f,
++      0x9c, 0x6d, 0x01, 0x83, 0x3d, 0x99, 0x91, 0xe7, 0x36, 0x50, 0x17, 0xeb,
++      0xf5, 0x31, 0xc1, 0xfd, 0xb3, 0xb8, 0x67, 0x1c, 0xed, 0xe9, 0xb8, 0x44,
++      0x9e, 0xee, 0x97, 0xf6, 0x33, 0xc4, 0x29, 0xe4, 0x69, 0x42, 0xda, 0xce,
++      0x10, 0x2f, 0x33, 0xb6, 0x9c, 0x1a, 0xbf, 0x21, 0x8c, 0xe5, 0xa4, 0xfc,
++      0x2b, 0xf8, 0x6d, 0x61, 0xde, 0xed, 0xf0, 0xc3, 0xdb, 0x2e, 0xe8, 0x76,
++      0xf6, 0xb9, 0x3e, 0x00, 0xc3, 0x98, 0xd8, 0xf0, 0x59, 0xec, 0x0b, 0x2c,
++      0xbb, 0x50, 0xf2, 0x1d, 0x48, 0x3a, 0x37, 0x60, 0xde, 0x41, 0x37, 0x5e,
++      0xe0, 0xf8, 0xb0, 0x8f, 0xbe, 0xce, 0x17, 0x1d, 0x18, 0xf2, 0xe5, 0xd2,
++      0x1a, 0x65, 0x93, 0x71, 0x74, 0x62, 0x97, 0x57, 0xc5, 0x5e, 0xca, 0x48,
++      0xe4, 0x4c, 0x06, 0x72, 0xe8, 0xc3, 0xee, 0x12, 0xf3, 0xd1, 0xd6, 0xe1,
++      0x39, 0xf0, 0x56, 0xfd, 0x29, 0xce, 0xe9, 0xaa, 0xd8, 0xf5, 0x5f, 0x65,
++      0xc3, 0xc2, 0x7d, 0xc1, 0x31, 0x4e, 0xc2, 0xfe, 0x46, 0xe5, 0x73, 0x71,
++      0xca, 0x8a, 0x96, 0xbd, 0xb4, 0x3d, 0xa4, 0x64, 0xb5, 0x48, 0xbb, 0xfc,
++      0xd4, 0xed, 0x7b, 0xe0, 0xa7, 0x9d, 0x2e, 0x6f, 0xcb, 0x18, 0xf3, 0x42,
++      0x03, 0xa9, 0x02, 0xef, 0xcc, 0x7b, 0x96, 0x2c, 0x78, 0x27, 0x15, 0x1e,
++      0x7c, 0x14, 0xed, 0x4f, 0x98, 0xf6, 0x0b, 0x32, 0x64, 0x64, 0x5d, 0xc5,
++      0x11, 0xa0, 0xc7, 0xb8, 0x66, 0xbc, 0xff, 0x2d, 0xf1, 0x7b, 0xb9, 0x9e,
++      0x27, 0x65, 0x60, 0x4c, 0xe3, 0x90, 0x92, 0x4d, 0x1c, 0xf2, 0xae, 0x71,
++      0x5a, 0x95, 0xcb, 0x57, 0xa8, 0xd0, 0xce, 0xec, 0x85, 0xfc, 0xc2, 0x27,
++      0xda, 0x08, 0x63, 0xb5, 0x6a, 0x5f, 0x25, 0x06, 0x6c, 0x4b, 0xbc, 0xa1,
++      0xa1, 0xe1, 0x12, 0xf0, 0xc9, 0x3c, 0x7c, 0x5e, 0xd2, 0xb1, 0x00, 0x3b,
++      0xb7, 0xe6, 0xff, 0x4b, 0x70, 0x22, 0x9e, 0x3a, 0x3d, 0xf3, 0xae, 0xf1,
++      0xfb, 0x30, 0x6e, 0xdf, 0x7c, 0x9e, 0xb2, 0x69, 0xfd, 0x61, 0xe3, 0x88,
++      0xd2, 0x91, 0x37, 0xe3, 0xae, 0x30, 0x7e, 0x3f, 0x7d, 0x53, 0x1c, 0xb5,
++      0xd4, 0x08, 0x73, 0xf0, 0x42, 0x3d, 0x7f, 0x1a, 0xba, 0x3a, 0x22, 0x37,
++      0x80, 0x41, 0x27, 0xc0, 0xbb, 0x73, 0x6b, 0x65, 0xeb, 0x4a, 0x45, 0xd4,
++      0x7d, 0xc1, 0x67, 0x4e, 0xde, 0x47, 0xc0, 0x3b, 0xd8, 0x98, 0x0d, 0xc7,
++      0x9c, 0x29, 0x39, 0x78, 0x66, 0x2b, 0x9f, 0xb9, 0xa4, 0x74, 0xf3, 0xe1,
++      0x2e, 0x9e, 0xb9, 0x5c, 0x5a, 0xfe, 0x28, 0xee, 0x79, 0xf6, 0x71, 0xa4,
++      0xe5, 0xf9, 0x66, 0x4f, 0x54, 0x63, 0x37, 0xf0, 0x5d, 0xf3, 0xcd, 0x01,
++      0xbf, 0x8b, 0x8c, 0xe7, 0x35, 0x88, 0x83, 0x3b, 0x0d, 0x0e, 0x26, 0xce,
++      0xc2, 0x7a, 0x6d, 0x30, 0x0e, 0x43, 0xac, 0x15, 0x57, 0x7e, 0xa1, 0xc2,
++      0x5e, 0xfe, 0x31, 0x93, 0x7f, 0x71, 0xab, 0x5c, 0xcd, 0x56, 0x42, 0x3c,
++      0xd7, 0x2c, 0x57, 0xee, 0x6f, 0x20, 0x57, 0x13, 0x5d, 0x3a, 0xdf, 0x81,
++      0x36, 0xcd, 0x92, 0x37, 0xaa, 0x7b, 0x64, 0xab, 0xfa, 0x20, 0x70, 0xb4,
++      0xca, 0xfb, 0x90, 0x2d, 0xac, 0xc5, 0x83, 0x95, 0x49, 0x99, 0xa8, 0xc6,
++      0xe4, 0x5a, 0xd5, 0x7e, 0xa0, 0x5d, 0x18, 0x07, 0x27, 0x36, 0xf9, 0x1b,
++      0xa5, 0xdf, 0x7e, 0xe0, 0xef, 0xb4, 0xe7, 0xb9, 0xca, 0x0d, 0xb4, 0x9f,
++      0xad, 0xde, 0x2b, 0x25, 0xd5, 0xbe, 0x7e, 0xcb, 0x18, 0x51, 0x33, 0x46,
++      0xbd, 0x7a, 0x97, 0x89, 0xdf, 0x95, 0xe5, 0x12, 0xb0, 0xaf, 0x7d, 0x96,
++      0xf3, 0xbd, 0xc3, 0xe4, 0x77, 0xc5, 0x9a, 0xfc, 0x91, 0xa8, 0xf1, 0x47,
++      0x7e, 0x06, 0x3d, 0xfe, 0x94, 0x44, 0xbd, 0xb0, 0x2f, 0xe6, 0x6a, 0x27,
++      0x4c, 0x6e, 0xc7, 0x5e, 0xf4, 0x75, 0x10, 0xef, 0xee, 0xc3, 0xef, 0x49,
++      0xd4, 0xa3, 0xbd, 0xe2, 0xd9, 0x28, 0x31, 0x02, 0xcf, 0xeb, 0x7a, 0x51,
++      0xaf, 0x03, 0x58, 0x72, 0xbf, 0x79, 0x16, 0xf6, 0x11, 0xd6, 0x0d, 0xef,
++      0x9b, 0xcf, 0x53, 0x59, 0x2f, 0xd9, 0x74, 0x9e, 0x0a, 0x45, 0xa5, 0xda,
++      0x86, 0xb6, 0x36, 0xb4, 0x51, 0xc9, 0x26, 0x1b, 0xf5, 0x56, 0x53, 0x9e,
++      0xa7, 0xc6, 0x61, 0x57, 0x33, 0x9c, 0x6b, 0x5f, 0x53, 0x0e, 0x4a, 0xaa,
++      0x4c, 0xfb, 0xc8, 0x78, 0xdf, 0x7a, 0x25, 0xb4, 0x1f, 0xb9, 0x1e, 0x9e,
++      0x5b, 0x2c, 0xfa, 0x2a, 0x16, 0x97, 0x8c, 0x64, 0x69, 0x7f, 0xfc, 0xd8,
++      0x16, 0x70, 0x65, 0x5d, 0x9d, 0xeb, 0x47, 0xf0, 0x83, 0x5d, 0x76, 0x2c,
++      0x71, 0x3d, 0x3e, 0x2b, 0x1b, 0xbd, 0x03, 0x5d, 0x6e, 0xab, 0x3a, 0xc9,
++      0xbc, 0xdf, 0x67, 0xee, 0x13, 0xb2, 0x56, 0xf9, 0x50, 0xbf, 0x9d, 0xfd,
++      0x5f, 0xb7, 0xe7, 0x33, 0x3d, 0x3c, 0x7f, 0xc2, 0x33, 0xe2, 0xf5, 0xd7,
++      0x54, 0x4e, 0xa3, 0xc6, 0x46, 0x0e, 0xcf, 0x2f, 0x81, 0x73, 0x7e, 0x04,
++      0x9e, 0x84, 0xb8, 0xfb, 0x75, 0x99, 0x50, 0x98, 0xaa, 0x0d, 0xb6, 0xd2,
++      0x60, 0xaa, 0xee, 0x14, 0x30, 0x15, 0xdb, 0xb7, 0xe2, 0x40, 0xbd, 0x97,
++      0x22, 0x59, 0x1d, 0x57, 0x6d, 0x89, 0x15, 0x5b, 0x8f, 0x64, 0xc4, 0x3a,
++      0x81, 0x1f, 0x65, 0xd4, 0x5e, 0x7a, 0x4d, 0xbc, 0xa5, 0x54, 0x95, 0xf9,
++      0xb1, 0x0b, 0x1b, 0x3c, 0xc7, 0x03, 0x16, 0x4b, 0x50, 0x96, 0xf9, 0x6e,
++      0x1a, 0x63, 0xbc, 0x06, 0xff, 0x73, 0x0f, 0xf8, 0x6d, 0x1b, 0x1e, 0xf9,
++      0x26, 0x46, 0x11, 0x63, 0x2c, 0x18, 0x7b, 0x71, 0x5e, 0x61, 0x89, 0x52,
++      0x7c, 0x11, 0xe5, 0x0f, 0x0d, 0x76, 0x78, 0xbd, 0x2b, 0x3c, 0xb7, 0x2f,
++      0xc5, 0xbf, 0x84, 0xe7, 0xaf, 0xc3, 0x1f, 0x8c, 0x4a, 0x9b, 0x5a, 0xb3,
++      0x10, 0x3b, 0xff, 0x3d, 0xea, 0x90, 0xfe, 0x3b, 0x4d, 0x7e, 0x0d, 0xf3,
++      0x06, 0xd8, 0x1f, 0xec, 0x96, 0xca, 0xe1, 0xca, 0xa1, 0x64, 0x3b, 0xb6,
++      0x79, 0x05, 0x75, 0x73, 0x98, 0x37, 0x9f, 0x4b, 0x5f, 0x44, 0x9a, 0x9f,
++      0x7f, 0x14, 0xcf, 0x29, 0x87, 0xef, 0x37, 0x72, 0x18, 0xbe, 0xcb, 0x1b,
++      0x3e, 0xdd, 0x8e, 0x31, 0xc8, 0xab, 0x66, 0xba, 0x38, 0x9f, 0x70, 0xcd,
++      0xdb, 0x4c, 0xae, 0x01, 0x9f, 0xbd, 0xdf, 0x3c, 0x73, 0xcc, 0x1c, 0x3f,
++      0xde, 0x65, 0xb0, 0x04, 0x76, 0x7b, 0xb8, 0x1f, 0x49, 0x67, 0xac, 0x09,
++      0xb3, 0xfe, 0x61, 0xef, 0x4e, 0x1e, 0x26, 0x65, 0xce, 0x53, 0xb1, 0x23,
++      0xe6, 0x8f, 0xe5, 0x6c, 0x9d, 0xb3, 0xf1, 0x8d, 0x9b, 0xe2, 0xdd, 0x4a,
++      0xd7, 0xf2, 0x0c, 0xa4, 0x6a, 0x67, 0xdb, 0x7f, 0xed, 0xbc, 0xbb, 0x48,
++      0x36, 0x6c, 0x07, 0x9c, 0xa6, 0xda, 0x24, 0x65, 0xae, 0xf1, 0x6e, 0x39,
++      0x7a, 0xca, 0xbf, 0x30, 0x79, 0x10, 0xfb, 0x55, 0x1e, 0x04, 0xf5, 0xe2,
++      0x5a, 0x35, 0x02, 0x5e, 0xf7, 0x31, 0x37, 0x0a, 0x7e, 0x4c, 0x0c, 0x73,
++      0x45, 0x5f, 0xf1, 0xf7, 0xab, 0x5c, 0xa9, 0x88, 0x17, 0xe6, 0xf5, 0x72,
++      0x1f, 0xde, 0xa1, 0xde, 0x7f, 0x7d, 0xa5, 0x9d, 0xf9, 0xaa, 0x28, 0xb9,
++      0x47, 0x7f, 0x09, 0xfd, 0x18, 0x95, 0x42, 0xd5, 0x03, 0xfe, 0x89, 0x52,
++      0x2e, 0xf1, 0x7c, 0x3f, 0xfc, 0x61, 0xc1, 0x3e, 0x69, 0x83, 0x6f, 0xa2,
++      0x7c, 0x1d, 0xcc, 0x68, 0x87, 0x0e, 0x62, 0x70, 0x9d, 0x1f, 0x1a, 0x40,
++      0x87, 0xcf, 0xcb, 0xda, 0xf8, 0xa2, 0xd4, 0xc7, 0x9b, 0x31, 0x2c, 0x30,
++      0xaa, 0x5b, 0x0e, 0xea, 0x9e, 0x8a, 0x65, 0x1a, 0xdd, 0x72, 0xc2, 0xe0,
++      0x4e, 0xae, 0x83, 0x2d, 0x85, 0xd1, 0x05, 0x25, 0x5f, 0x75, 0xb5, 0x1e,
++      0x8e, 0x75, 0x59, 0xe5, 0xf9, 0x72, 0x0c, 0xe6, 0xfa, 0x46, 0x0c, 0x0e,
++      0x3b, 0x65, 0xd6, 0xd5, 0xd9, 0x1b, 0xe6, 0xcc, 0x47, 0xb3, 0x87, 0x99,
++      0xdb, 0x01, 0x6c, 0x3d, 0x3d, 0x35, 0x5b, 0xa1, 0x2d, 0x0c, 0x82, 0xba,
++      0xbf, 0x89, 0x1e, 0x7f, 0xac, 0x30, 0xe4, 0x96, 0x68, 0xdd, 0xbe, 0xa0,
++      0x72, 0x66, 0x27, 0xa7, 0xf2, 0x2a, 0x5e, 0xd8, 0x7c, 0x76, 0xf3, 0x5e,
++      0xe7, 0x36, 0x31, 0xf8, 0xfe, 0x1d, 0x66, 0xfd, 0x63, 0x4e, 0xa9, 0xd2,
++      0xe5, 0xcc, 0xaa, 0xb3, 0xb5, 0xac, 0xf9, 0x16, 0x27, 0x37, 0x95, 0x6e,
++      0x7c, 0x76, 0x2f, 0xb1, 0x3e, 0xcf, 0x31, 0x0a, 0x15, 0x9e, 0xe3, 0xe8,
++      0xf7, 0x69, 0xf3, 0x7e, 0xa0, 0xa1, 0xde, 0xa9, 0x78, 0x23, 0x63, 0x8c,
++      0xed, 0x28, 0x6f, 0x54, 0xa8, 0x6b, 0xd0, 0x7f, 0x5c, 0xcf, 0x21, 0x92,
++      0x2d, 0xc2, 0x3f, 0x25, 0x7d, 0x47, 0xa6, 0xf2, 0x2b, 0xcc, 0xdb, 0x7a,
++      0x68, 0xea, 0x1a, 0xfc, 0xa5, 0x73, 0x9e, 0xce, 0x2b, 0x5f, 0x67, 0x1c,
++      0x8c, 0xed, 0x54, 0x9f, 0x45, 0x13, 0xab, 0x3d, 0x3c, 0x35, 0xb8, 0x1e,
++      0x91, 0x27, 0x4c, 0x1f, 0xbc, 0x4f, 0x6e, 0xfb, 0x52, 0x4a, 0xff, 0xc1,
++      0x3f, 0x18, 0x85, 0x7f, 0xd0, 0x09, 0x5d, 0x4f, 0x3f, 0x83, 0xf8, 0xbb,
++      0x13, 0x7b, 0x85, 0xe3, 0xdc, 0xa5, 0xc6, 0x89, 0x60, 0x9c, 0x59, 0xf8,
++      0x38, 0x8c, 0x47, 0xe6, 0x3d, 0x07, 0x58, 0x02, 0xb6, 0xde, 0x63, 0xbc,
++      0xdc, 0xc6, 0x9c, 0x87, 0xa1, 0x27, 0x98, 0xa3, 0x32, 0x11, 0xe6, 0x0d,
++      0xa1, 0x9d, 0x6f, 0xda, 0x1d, 0x44, 0x3b, 0xfa, 0x07, 0x6c, 0x2b, 0xb7,
++      0xd9, 0x32, 0xa8, 0xb0, 0x81, 0xf6, 0x6b, 0x48, 0x43, 0x0d, 0x73, 0xa5,
++      0x5d, 0xc5, 0x9e, 0x53, 0xf3, 0x3a, 0xa8, 0xda, 0x59, 0xd9, 0x31, 0xd0,
++      0x4e, 0xfc, 0x87, 0xbe, 0x97, 0x75, 0xbc, 0xb3, 0xa0, 0xe4, 0x08, 0x72,
++      0x32, 0x1e, 0xe6, 0xbd, 0xe8, 0x76, 0x61, 0xfd, 0x81, 0xf5, 0x86, 0x19,
++      0xff, 0xe7, 0x41, 0xee, 0x68, 0xa7, 0xf2, 0xad, 0x5f, 0xbe, 0x29, 0x07,
++      0x8d, 0x6d, 0xc2, 0x3a, 0x91, 0x30, 0x2f, 0xb9, 0x89, 0xe6, 0xac, 0x59,
++      0x73, 0xb6, 0x63, 0x6c, 0x58, 0xe5, 0xe2, 0xf3, 0x99, 0x33, 0x97, 0x61,
++      0x1f, 0xcd, 0x67, 0x4d, 0xa3, 0xc0, 0x19, 0xda, 0x86, 0x94, 0x37, 0x3c,
++      0xd8, 0xeb, 0x36, 0xac, 0x1d, 0x6d, 0xc2, 0xa0, 0xf1, 0x2d, 0xde, 0x2b,
++      0xce, 0xca, 0x73, 0xcc, 0x51, 0xf8, 0xf5, 0x61, 0x7b, 0xae, 0x63, 0x6e,
++      0xea, 0x5a, 0xc5, 0x93, 0x53, 0xcb, 0x3a, 0x3f, 0x4c, 0xf3, 0x81, 0x3a,
++      0x9b, 0x6b, 0x9b, 0x94, 0x59, 0x8f, 0xb1, 0x9c, 0xa4, 0xbc, 0xe2, 0x35,
++      0xe7, 0x39, 0xa1, 0xfe, 0xc6, 0xa8, 0xc9, 0xc7, 0x3e, 0x88, 0xf9, 0x13,
++      0x37, 0x6a, 0x59, 0x3a, 0x00, 0x3b, 0xf4, 0x77, 0x0e, 0x70, 0x21, 0xf6,
++      0xd3, 0x75, 0xa7, 0x79, 0x7e, 0xdb, 0xf9, 0xdf, 0x4a, 0x2e, 0x1d, 0xc8,
++      0xc8, 0xe2, 0x36, 0xdf, 0xe1, 0xb7, 0xdf, 0x35, 0x04, 0x7d, 0x6f, 0x49,
++      0x71, 0xd4, 0x4b, 0x2c, 0xf0, 0x5c, 0xc3, 0x1d, 0x01, 0xca, 0xa7, 0x1f,
++      0x9d, 0x04, 0xbd, 0xbc, 0x1e, 0x04, 0x3e, 0x62, 0x4e, 0x22, 0xee, 0x99,
++      0x13, 0x18, 0xf7, 0x40, 0xaf, 0xab, 0xce, 0x2b, 0xb4, 0xce, 0xfe, 0xfe,
++      0x5e, 0xe6, 0xc0, 0xf5, 0x78, 0xe1, 0xda, 0xab, 0xef, 0xda, 0xd0, 0x77,
++      0xc4, 0xbc, 0x9f, 0xd8, 0xe6, 0xbf, 0xf4, 0xb1, 0xdc, 0xce, 0x35, 0x33,
++      0xb1, 0x17, 0xd6, 0x1f, 0x57, 0xb4, 0xcc, 0x42, 0x57, 0xcf, 0xa9, 0xf9,
++      0xdc, 0x0f, 0x59, 0x88, 0xc8, 0xfc, 0xb6, 0xfc, 0xde, 0x0f, 0xf9, 0xdd,
++      0xc3, 0x14, 0xcf, 0x5d, 0x64, 0x2d, 0x94, 0x31, 0xca, 0x17, 0x65, 0xeb,
++      0xe3, 0xdd, 0xdc, 0x73, 0xe5, 0xed, 0x75, 0x77, 0x94, 0xcd, 0x4d, 0xda,
++      0xe1, 0xba, 0xf3, 0x7a, 0xb7, 0xdc, 0xaa, 0x70, 0x7f, 0x64, 0x7e, 0x83,
++      0xb5, 0xf5, 0xcd, 0xda, 0x66, 0x9a, 0xbe, 0x83, 0x08, 0xfb, 0x63, 0x0c,
++      0x94, 0x36, 0x88, 0xe7, 0x50, 0xed, 0x52, 0x56, 0x32, 0x68, 0x29, 0x6c,
++      0x9d, 0x73, 0xf3, 0x49, 0xc6, 0xbc, 0x8f, 0xc9, 0xbf, 0x03, 0xcd, 0xb9,
++      0xe1, 0xa8, 0xe8, 0xb6, 0x33, 0xe0, 0xf7, 0xa6, 0x0b, 0x7f, 0x90, 0x67,
++      0xd6, 0x15, 0x47, 0xce, 0xa9, 0x73, 0x57, 0xec, 0xd1, 0x4e, 0x47, 0x16,
++      0xbd, 0xed, 0x73, 0x78, 0xa9, 0xa1, 0xce, 0x1a, 0xde, 0x3d, 0xb1, 0x4d,
++      0x1b, 0xfd, 0x09, 0xf8, 0x52, 0xde, 0xcf, 0x83, 0x52, 0xfc, 0xa6, 0xba,
++      0x46, 0xaf, 0x33, 0x4e, 0xc3, 0xf3, 0x01, 0x57, 0x0a, 0xf0, 0x0b, 0x0b,
++      0xf0, 0x09, 0x0b, 0x4a, 0x2f, 0x30, 0x6e, 0xc3, 0x18, 0x5b, 0x19, 0x3e,
++      0x48, 0x39, 0x68, 0xf7, 0x4e, 0xaa, 0x18, 0xe2, 0xa5, 0x8d, 0x54, 0xb9,
++      0x2c, 0x5e, 0xf2, 0xc1, 0xed, 0x7c, 0xba, 0xee, 0x72, 0x2c, 0xdb, 0x1c,
++      0x87, 0x4b, 0xaa, 0x5c, 0xb4, 0x0e, 0x60, 0xe4, 0xe3, 0xd0, 0xd5, 0xcf,
++      0xfb, 0x8c, 0xbf, 0xdd, 0x49, 0x7e, 0x7f, 0x95, 0x93, 0xb4, 0x87, 0x46,
++      0xc5, 0xbb, 0xe0, 0x0d, 0x3f, 0x28, 0xf4, 0x3f, 0x52, 0xc9, 0x23, 0xe4,
++      0xdb, 0xf6, 0x37, 0x0d, 0xa1, 0x7d, 0x1d, 0x95, 0xc1, 0x0b, 0xaf, 0xab,
++      0x33, 0x8e, 0x4f, 0xf8, 0xad, 0xb2, 0xa1, 0xe2, 0x77, 0xa3, 0x3d, 0x32,
++      0x08, 0xdf, 0x57, 0x60, 0xa1, 0xf8, 0x8d, 0x83, 0x05, 0xdf, 0x43, 0xdd,
++      0xcb, 0x74, 0x23, 0x69, 0xf2, 0x54, 0x69, 0x5f, 0x19, 0xdf, 0xd3, 0x79,
++      0x7a, 0xcc, 0x4d, 0x65, 0xfe, 0x64, 0x51, 0xe5, 0xeb, 0x31, 0xd6, 0xc7,
++      0x58, 0x1e, 0xe3, 0x7d, 0x8c, 0xdb, 0xe9, 0x5c, 0xbd, 0x89, 0xc6, 0x6e,
++      0xb1, 0xbd, 0x30, 0x5f, 0x52, 0xdb, 0xad, 0xad, 0xcc, 0x3e, 0xd8, 0x3a,
++      0x57, 0xc5, 0x4e, 0x4a, 0x6e, 0x8f, 0x1c, 0x1b, 0x6e, 0x07, 0xcf, 0x7b,
++      0x55, 0x3e, 0x9d, 0xed, 0xdd, 0x0f, 0x1c, 0xcb, 0xf8, 0x1c, 0xb1, 0x69,
++      0xc8, 0xe7, 0x7b, 0xf0, 0xec, 0x1d, 0xf0, 0x9e, 0xcf, 0x80, 0x5b, 0x95,
++      0x1d, 0xfa, 0xbc, 0x6c, 0x55, 0x98, 0x03, 0x5f, 0xdb, 0x97, 0x57, 0xeb,
++      0x41, 0xdf, 0x3c, 0xd4, 0x4d, 0x61, 0xfe, 0x28, 0x7d, 0x2a, 0xd7, 0x9c,
++      0x93, 0xd3, 0x37, 0xef, 0x85, 0xbf, 0x4e, 0xfd, 0x63, 0xa9, 0xb1, 0xae,
++      0x47, 0x3e, 0x20, 0xe5, 0xda, 0x6e, 0x67, 0xfe, 0x41, 0xf0, 0x0d, 0x5f,
++      0xe5, 0xac, 0xc2, 0x9f, 0xd4, 0x6b, 0xac, 0xbf, 0x8f, 0x74, 0x76, 0xf2,
++      0xcb, 0xe3, 0xda, 0x67, 0xcc, 0xf5, 0x02, 0xb3, 0x78, 0xa7, 0xbb, 0x77,
++      0xb0, 0xf3, 0x2f, 0x0d, 0xae, 0x25, 0x6e, 0xee, 0x55, 0xd8, 0xc0, 0xae,
++      0x87, 0x72, 0xc2, 0x7c, 0x1f, 0x62, 0xea, 0x03, 0x92, 0xab, 0x41, 0x6f,
++      0xf6, 0xf1, 0xfe, 0x47, 0xa6, 0x2d, 0xaf, 0x03, 0x39, 0x3c, 0xd6, 0x7a,
++      0x96, 0x3f, 0xae, 0x71, 0x7d, 0x67, 0x78, 0x9e, 0x1f, 0xe6, 0xbc, 0xdf,
++      0x94, 0x5b, 0x0b, 0x79, 0x0a, 0x69, 0xd0, 0x63, 0x4d, 0x80, 0xde, 0x7a,
++      0x35, 0x21, 0xbd, 0x1e, 0xf3, 0x84, 0x22, 0x32, 0xd6, 0x9b, 0x82, 0x13,
++      0xaf, 0xe9, 0xa9, 0xd7, 0x60, 0xf3, 0xab, 0x21, 0x9d, 0x1a, 0xe3, 0xd7,
++      0x6b, 0x7c, 0x9f, 0xc4, 0x58, 0xed, 0x32, 0xd6, 0x47, 0x3e, 0xb7, 0xd2,
++      0x91, 0x34, 0xf9, 0xdc, 0xad, 0xcf, 0xef, 0x6b, 0xa2, 0xef, 0xd6, 0xef,
++      0x4a, 0xf3, 0x8c, 0x8b, 0xad, 0xd0, 0x3f, 0x21, 0x8d, 0xbd, 0xd0, 0x73,
++      0x98, 0xa3, 0x1f, 0xfa, 0x1a, 0x21, 0x5f, 0x42, 0x1f, 0x25, 0xaa, 0xe4,
++      0x62, 0x36, 0xc3, 0xb9, 0x44, 0x8d, 0xcf, 0x42, 0xba, 0x14, 0x6d, 0x11,
++      0x9e, 0x25, 0x46, 0xbd, 0xcf, 0xec, 0xd3, 0xeb, 0xff, 0xa4, 0x99, 0xaf,
++      0x6b, 0xea, 0xb0, 0xaf, 0xfd, 0x68, 0xff, 0xb5, 0x00, 0x63, 0x31, 0x08,
++      0x87, 0xfd, 0x1f, 0x62, 0xf7, 0xfd, 0xba, 0xaf, 0xce, 0x10, 0xbf, 0x87,
++      0xdf, 0xa1, 0x91, 0x4e, 0xee, 0xaf, 0x90, 0x87, 0xec, 0xa3, 0xd7, 0xc4,
++      0x5c, 0x49, 0x43, 0x47, 0x0b, 0x0d, 0x29, 0xff, 0x66, 0x1d, 0x77, 0x4f,
++      0xd3, 0xdc, 0x29, 0x6b, 0xdd, 0xb2, 0x50, 0xed, 0x94, 0xf9, 0xaa, 0xf2,
++      0x75, 0x86, 0x45, 0x88, 0xed, 0xb8, 0x2f, 0x55, 0x2e, 0xb3, 0xc9, 0x99,
++      0x0c, 0xf7, 0x67, 0x37, 0xea, 0xd1, 0x86, 0xa0, 0xac, 0x69, 0xfd, 0x54,
++      0x93, 0x5b, 0xbf, 0xd3, 0x98, 0x6b, 0xb4, 0xe6, 0xe3, 0x5d, 0x6f, 0xca,
++      0xc7, 0x6b, 0xce, 0x7f, 0x2a, 0xcb, 0x23, 0x07, 0x3b, 0x64, 0xe0, 0x6c,
++      0xa7, 0x91, 0xd1, 0xfb, 0xcd, 0x38, 0x18, 0x6f, 0x69, 0x5c, 0x06, 0x96,
++      0xbe, 0x28, 0xa5, 0x69, 0x95, 0xff, 0xde, 0xf4, 0xfd, 0xc3, 0xa0, 0xf9,
++      0xfe, 0x29, 0x67, 0x31, 0x17, 0xa6, 0xb0, 0x84, 0xf5, 0x3a, 0x98, 0x1a,
++      0x4e, 0xda, 0xfc, 0x46, 0xf7, 0x31, 0x19, 0x58, 0x1d, 0x97, 0xf4, 0x12,
++      0x31, 0x03, 0xb3, 0x01, 0x52, 0x2a, 0x2e, 0x9a, 0xbe, 0xa8, 0xfb, 0xf3,
++      0x96, 0xf8, 0x3e, 0x0d, 0xbc, 0xca, 0xf7, 0x85, 0x44, 0x44, 0x65, 0x0c,
++      0x7c, 0x10, 0xf2, 0xd4, 0x66, 0xf0, 0x80, 0x23, 0xf9, 0x25, 0xb6, 0x27,
++      0xf6, 0xf8, 0x47, 0xac, 0x59, 0x21, 0x69, 0x0b, 0xdb, 0xa8, 0xfe, 0x70,
++      0x1d, 0xc6, 0xd3, 0xc9, 0xeb, 0x51, 0x59, 0x6f, 0x78, 0xd8, 0x13, 0xfa,
++      0x9b, 0x89, 0x52, 0x2d, 0xcc, 0x27, 0x7d, 0xc4, 0xc4, 0x00, 0x34, 0x8d,
++      0xc5, 0x4a, 0xab, 0xec, 0x3d, 0x63, 0xbe, 0x9d, 0xe8, 0x50, 0x67, 0x68,
++      0x4d, 0xfa, 0xcf, 0xd4, 0xbf, 0xdd, 0x65, 0xde, 0x80, 0x08, 0xdf, 0x37,
++      0xf9, 0x24, 0xf1, 0xb8, 0xda, 0x07, 0x03, 0xf5, 0xb0, 0xde, 0xa8, 0xab,
++      0x7d, 0x60, 0xf2, 0x29, 0x6b, 0x68, 0x1e, 0x83, 0xcf, 0xc3, 0x67, 0x07,
++      0xd0, 0x96, 0xeb, 0x84, 0xb2, 0x7e, 0x40, 0xe5, 0x39, 0x46, 0xb2, 0x47,
++      0xcc, 0x59, 0x5a, 0x9f, 0x1a, 0xcb, 0xcd, 0xb2, 0xff, 0x50, 0x37, 0x74,
++      0x34, 0x8d, 0xdf, 0x4a, 0x2f, 0x7d, 0xf8, 0x9f, 0x19, 0x79, 0xe1, 0x7b,
++      0xde, 0xb7, 0xd6, 0xf9, 0xa3, 0x7d, 0xe1, 0x7b, 0x67, 0xfb, 0x1b, 0x0c,
++      0xf2, 0x92, 0x67, 0x80, 0x28, 0x2f, 0x32, 0x97, 0x9d, 0xd7, 0x28, 0xcd,
++      0xb7, 0x25, 0xce, 0x12, 0x7f, 0xad, 0xfd, 0x38, 0xe8, 0x3b, 0xdc, 0xb3,
++      0xbb, 0xe5, 0x06, 0x51, 0x17, 0x9f, 0xb6, 0xb6, 0x2a, 0x8c, 0x5d, 0x94,
++      0xe5, 0x58, 0xa6, 0x5b, 0x66, 0xab, 0x36, 0xbf, 0x4d, 0x65, 0x2c, 0x96,
++      0x67, 0x95, 0x32, 0xa7, 0x74, 0xdc, 0x90, 0xe8, 0xef, 0x76, 0x3b, 0xa4,
++      0xe8, 0x52, 0x9e, 0x87, 0x64, 0xbd, 0x36, 0xdd, 0x94, 0x03, 0xdc, 0x66,
++      0xe4, 0xec, 0xef, 0xa2, 0xd2, 0xc9, 0x38, 0x52, 0xb8, 0xa7, 0x87, 0xa4,
++      0x58, 0x6b, 0x3e, 0x67, 0x60, 0x9e, 0x11, 0xe5, 0xb6, 0xbf, 0x69, 0xef,
++      0x31, 0x57, 0x0f, 0xb8, 0x2a, 0x4e, 0x9f, 0x95, 0xf5, 0xf6, 0x1a, 0x7b,
++      0xfb, 0x15, 0xac, 0xc7, 0xfb, 0x2d, 0xf1, 0x48, 0x1b, 0x6c, 0x84, 0xc9,
++      0x35, 0x3e, 0x1c, 0x2f, 0xc3, 0x3f, 0x1b, 0x32, 0xe3, 0xde, 0x81, 0x7b,
++      0xd6, 0xdd, 0x67, 0xde, 0xef, 0x37, 0xf7, 0x9d, 0xe6, 0x3e, 0x82, 0x7b,
++      0xe6, 0x8d, 0xb3, 0x4f, 0x96, 0xfc, 0x9e, 0x88, 0xdf, 0xeb, 0x64, 0x25,
++      0x7a, 0x11, 0xe8, 0xa9, 0xd1, 0x29, 0x9f, 0xae, 0x29, 0xfe, 0x5a, 0xde,
++      0x12, 0x01, 0xc1, 0x7e, 0x73, 0x7d, 0xeb, 0x1e, 0xfc, 0xdc, 0x4d, 0xdf,
++      0x4a, 0x55, 0x8c, 0xac, 0x34, 0xd3, 0x9b, 0x03, 0xad, 0xef, 0x96, 0x83,
++      0x45, 0x1b, 0xa5, 0xfd, 0xc6, 0x62, 0x45, 0xe7, 0x1a, 0x1d, 0x83, 0xdf,
++      0x78, 0xb8, 0xfa, 0xa8, 0xab, 0xf3, 0x62, 0xc2, 0x5c, 0xca, 0x4e, 0xcc,
++      0x6b, 0xc8, 0x9c, 0x5b, 0xb3, 0x2d, 0x73, 0x3a, 0xc3, 0xf3, 0x99, 0x66,
++      0xac, 0x4a, 0x5b, 0x44, 0x3b, 0xc3, 0xef, 0x9a, 0x7c, 0xd4, 0x5d, 0xa4,
++      0xae, 0x69, 0xca, 0xcd, 0xff, 0x52, 0x4b, 0x6e, 0x3e, 0xbf, 0xfb, 0x16,
++      0xf9, 0x6f, 0x0d, 0xc6, 0x95, 0x3a, 0x24, 0x72, 0x36, 0xcc, 0xc1, 0xe2,
++      0x1a, 0x13, 0x87, 0xf1, 0x7b, 0xef, 0xa9, 0x5d, 0x62, 0x4e, 0xa1, 0x9c,
++      0x7f, 0xc7, 0x65, 0x7e, 0xab, 0x9b, 0x0d, 0xe3, 0x54, 0xcc, 0xeb, 0x21,
++      0xe6, 0x3a, 0x60, 0x62, 0x0a, 0x7c, 0x57, 0x96, 0x9e, 0x83, 0x53, 0xdc,
++      0x1b, 0xbf, 0x1d, 0xd9, 0xce, 0xfd, 0x57, 0xe3, 0xc4, 0x35, 0x86, 0xe4,
++      0x77, 0xe3, 0x3e, 0xf6, 0xd5, 0x9e, 0xcd, 0xf0, 0x9b, 0x8c, 0xcb, 0x8d,
++      0x8c, 0xfa, 0xf6, 0x83, 0x67, 0x1e, 0x5b, 0x0d, 0xee, 0x3b, 0x7e, 0x23,
++      0x9e, 0x55, 0x39, 0x01, 0x5b, 0xe6, 0x9b, 0xe7, 0xab, 0x0d, 0xfd, 0x1d,
++      0xcb, 0xe2, 0xb2, 0xca, 0xcb, 0x07, 0x56, 0x4b, 0xe2, 0x3d, 0x73, 0xe8,
++      0xfa, 0x55, 0x2e, 0xc1, 0x7c, 0xe3, 0x53, 0x28, 0x3f, 0x2f, 0x6b, 0x15,
++      0x1d, 0x7f, 0x9d, 0x6f, 0x30, 0xa7, 0xc0, 0x55, 0x67, 0x44, 0x03, 0x4b,
++      0x45, 0x8c, 0x17, 0x7e, 0xb3, 0x1d, 0xc7, 0x33, 0xd2, 0x57, 0x36, 0x7b,
++      0x34, 0xcc, 0x05, 0xe9, 0xea, 0xa1, 0x4d, 0x28, 0x37, 0xba, 0x54, 0x1e,
++      0x82, 0xc6, 0x23, 0xc4, 0x7a, 0x31, 0xd4, 0xe5, 0x5c, 0x3b, 0x69, 0xaf,
++      0x02, 0xea, 0xa4, 0x34, 0xc6, 0xa9, 0xab, 0xdc, 0x44, 0xf2, 0xd9, 0x73,
++      0x4b, 0xf4, 0xd7, 0x94, 0x8e, 0x4f, 0x0d, 0xcf, 0x48, 0xc1, 0x8d, 0xc2,
++      0x17, 0x9b, 0x57, 0x7e, 0xce, 0xfd, 0xc0, 0xd0, 0x5d, 0x9b, 0x91, 0x2c,
++      0xe7, 0xc6, 0xb1, 0xe9, 0x87, 0xe8, 0xf9, 0xe8, 0x33, 0x02, 0xb1, 0xe6,
++      0xd5, 0xf7, 0x8f, 0x7c, 0xce, 0x78, 0x6f, 0xf8, 0xcd, 0x90, 0xfe, 0x26,
++      0x64, 0xa6, 0x71, 0x44, 0x4e, 0x55, 0xf6, 0xf2, 0x5b, 0x09, 0x7f, 0x0b,
++      0x7c, 0x3b, 0xd6, 0xe8, 0x52, 0xdf, 0xa5, 0xcc, 0x34, 0x98, 0x3f, 0x17,
++      0xda, 0x1e, 0xae, 0x55, 0xdc, 0x7c, 0x37, 0x91, 0x30, 0xdf, 0x4d, 0xf0,
++      0xdb, 0x8f, 0x1f, 0xed, 0x0d, 0xf7, 0xfb, 0xad, 0x38, 0x9c, 0x32, 0xf8,
++      0xa7, 0xf0, 0x0d, 0xc3, 0x3c, 0x4c, 0xe6, 0x8b, 0x06, 0xc1, 0x31, 0x9f,
++      0xf1, 0xdb, 0xe9, 0xc3, 0x6b, 0x98, 0xe3, 0x95, 0x1a, 0x78, 0x78, 0x94,
++      0xcf, 0x98, 0x37, 0xd6, 0x2e, 0xf9, 0xd1, 0x76, 0xea, 0xf2, 0xce, 0x35,
++      0x6f, 0xaf, 0x5c, 0xae, 0xc6, 0x55, 0x0e, 0x5c, 0x09, 0x38, 0xbf, 0x2e,
++      0x1f, 0xeb, 0xe1, 0xd9, 0xdd, 0x84, 0x6a, 0x1f, 0xee, 0x77, 0x1d, 0x37,
++      0x98, 0x58, 0xd7, 0xfa, 0xe4, 0x78, 0x06, 0xb8, 0xe5, 0x82, 0x58, 0x7f,
++      0x90, 0xe9, 0x87, 0xef, 0xcd, 0xb1, 0xd2, 0x68, 0x07, 0xd9, 0x49, 0x70,
++      0xaf, 0xbf, 0x13, 0xd4, 0x41, 0xef, 0x8d, 0x06, 0xf1, 0x3a, 0x30, 0xd4,
++      0x34, 0xdb, 0x64, 0xc5, 0x3e, 0xc3, 0x3a, 0xbd, 0x90, 0xbf, 0x28, 0xe6,
++      0xe3, 0xc0, 0x17, 0xd8, 0x27, 0x75, 0x97, 0xef, 0x1c, 0x7d, 0xa6, 0x12,
++      0x0f, 0xfd, 0x94, 0xef, 0x81, 0x7f, 0x49, 0xa5, 0x93, 0xc2, 0xf3, 0x4e,
++      0xe6, 0xb3, 0xce, 0x56, 0x27, 0xb1, 0x87, 0x1c, 0x83, 0xcd, 0x1c, 0xf4,
++      0xf1, 0xe1, 0x1e, 0x8d, 0x15, 0x78, 0x1e, 0xaa, 0xb1, 0x88, 0xb6, 0x31,
++      0x3c, 0xdf, 0x71, 0xe0, 0x0b, 0x84, 0xfb, 0xf2, 0x99, 0x7d, 0x37, 0x7f,
++      0x0b, 0x43, 0x1c, 0x93, 0x4e, 0x9c, 0xe7, 0x79, 0xdc, 0xc6, 0xc3, 0x32,
++      0x03, 0x9a, 0x4f, 0x9b, 0x79, 0x3e, 0x98, 0xf1, 0xe4, 0x7a, 0x8d, 0xe7,
++      0x95, 0x07, 0x50, 0x32, 0xd7, 0x91, 0x34, 0x8f, 0x98, 0x7c, 0xce, 0x2c,
++      0xe6, 0xfa, 0x98, 0xbc, 0x01, 0x7c, 0xfd, 0x66, 0x25, 0xed, 0x4f, 0xa8,
++      0x3c, 0xa4, 0x54, 0xe2, 0xb2, 0x8c, 0x24, 0xe9, 0x03, 0x96, 0xdd, 0x54,
++      0xe2, 0x3a, 0xe4, 0xe1, 0x46, 0xe5, 0x99, 0x1e, 0xfe, 0xaf, 0x8a, 0x3a,
++      0xec, 0xe1, 0x0d, 0x95, 0x83, 0x94, 0x62, 0xcc, 0x04, 0xf7, 0xfd, 0x26,
++      0x0f, 0x8a, 0xe3, 0xf0, 0x5d, 0xbf, 0xbc, 0x51, 0xd9, 0xb6, 0xbf, 0x1c,
++      0xc7, 0x7c, 0x03, 0xcf, 0xb1, 0x2e, 0xf4, 0x50, 0x0f, 0x71, 0x3c, 0xdd,
++      0x47, 0x58, 0x87, 0x7c, 0x0d, 0xe3, 0x9a, 0xea, 0x5b, 0xcb, 0xa4, 0x58,
++      0x96, 0xb4, 0x79, 0x9c, 0xfb, 0x54, 0x8f, 0xc6, 0x40, 0x6c, 0x97, 0x76,
++      0x0f, 0xab, 0xfe, 0x78, 0xb6, 0xc7, 0xf3, 0xaf, 0xb0, 0x1f, 0xe6, 0x43,
++      0x31, 0xe7, 0x8a, 0xba, 0xaf, 0x99, 0x06, 0x6d, 0xff, 0xdf, 0x50, 0xb1,
++      0xf4, 0x71, 0xd4, 0xa7, 0x8d, 0x86, 0xbc, 0xd4, 0x12, 0xdb, 0xdf, 0x7c,
++      0x68, 0x5e, 0xf2, 0xfa, 0x99, 0xed, 0x6f, 0x32, 0xec, 0xbb, 0x5d, 0xf3,
++      0x3e, 0xc4, 0xa5, 0xfd, 0xd8, 0xaf, 0x8f, 0x49, 0x7d, 0x25, 0x9d, 0xf8,
++      0xb4, 0x84, 0xfd, 0x06, 0x87, 0x78, 0xde, 0x51, 0xcc, 0x8c, 0xb8, 0x0b,
++      0x8a, 0x9e, 0x54, 0x82, 0x39, 0xc8, 0x97, 0x31, 0x5e, 0xbd, 0xd1, 0x1a,
++      0x7b, 0x48, 0xe5, 0x36, 0x25, 0xed, 0xeb, 0xb5, 0x19, 0x92, 0x4d, 0xac,
++      0xcd, 0x9f, 0x9b, 0xb5, 0xf9, 0x18, 0xfa, 0xf6, 0xce, 0x8c, 0x4a, 0xfa,
++      0x4c, 0x3a, 0x79, 0x5a, 0x78, 0x96, 0xb8, 0x8f, 0x31, 0x2c, 0xeb, 0xc1,
++      0x4c, 0x12, 0xf3, 0x4d, 0x61, 0xbe, 0x28, 0x1b, 0xbc, 0x1e, 0x81, 0x6f,
++      0xbe, 0x87, 0x7b, 0xfb, 0x10, 0x75, 0x26, 0x79, 0x51, 0x54, 0xef, 0x80,
++      0x4f, 0x9e, 0x26, 0x4d, 0x00, 0xca, 0x9d, 0x29, 0x15, 0x07, 0xbc, 0xde,
++      0xe0, 0xf9, 0xa2, 0xa6, 0xaf, 0x00, 0xfa, 0xe6, 0x34, 0x7d, 0xc9, 0x99,
++      0x6d, 0xec, 0x9a, 0x4a, 0x9c, 0x12, 0xe2, 0x25, 0xe2, 0x17, 0xe2, 0xfa,
++      0x47, 0x7a, 0xc3, 0x6f, 0x5a, 0xf2, 0x77, 0xe7, 0xb6, 0xe7, 0xde, 0x86,
++      0xba, 0x57, 0x32, 0x2a, 0xbf, 0xd9, 0x3d, 0x22, 0x1f, 0x91, 0xdc, 0xa7,
++      0x52, 0xc9, 0x9c, 0xe5, 0x19, 0x0c, 0x88, 0xb2, 0xc6, 0x6b, 0xea, 0x5c,
++      0xcf, 0x60, 0x0b, 0xae, 0x4d, 0x06, 0x63, 0x29, 0xde, 0xc2, 0x67, 0xea,
++      0x87, 0xcc, 0x53, 0xd6, 0x7e, 0x07, 0x7b, 0x48, 0xff, 0x9f, 0x8e, 0xcb,
++      0xe0, 0xe3, 0x3c, 0xf8, 0x78, 0xfc, 0x16, 0x0c, 0x16, 0xdd, 0xc6, 0x60,
++      0x5b, 0x6a, 0xbc, 0x7b, 0x41, 0x53, 0xc1, 0x25, 0xfe, 0x9a, 0xdf, 0x96,
++      0x15, 0xd2, 0x34, 0xca, 0xff, 0xb5, 0x23, 0x57, 0x33, 0x5c, 0x0f, 0x60,
++      0x30, 0xf4, 0xb7, 0xb6, 0x23, 0x4b, 0x98, 0xbf, 0x92, 0x5f, 0xc8, 0x6e,
++      0xca, 0x75, 0x2c, 0xae, 0x05, 0xfb, 0x13, 0xeb, 0x1a, 0x68, 0xd9, 0x52,
++      0x72, 0xa0, 0x65, 0x60, 0xab, 0xd6, 0xf9, 0x1e, 0x32, 0xc0, 0x79, 0x52,
++      0xfe, 0x42, 0xd9, 0xdb, 0xc9, 0xa7, 0xe8, 0x00, 0x4f, 0x3e, 0x78, 0x4f,
++      0x56, 0xf2, 0x67, 0x78, 0x16, 0x26, 0xd6, 0xc8, 0x3d, 0x94, 0x49, 0xe2,
++      0x04, 0x60, 0xc8, 0x04, 0x79, 0xac, 0xf1, 0xe0, 0xcc, 0xb3, 0x7b, 0xf1,
++      0x7b, 0xb3, 0x87, 0x39, 0x33, 0xf9, 0x73, 0xd4, 0x57, 0x62, 0xdd, 0x79,
++      0x8f, 0xf6, 0x0f, 0x6f, 0xc4, 0xc1, 0x73, 0xbc, 0x1f, 0x78, 0xb2, 0x0d,
++      0xfa, 0xca, 0x31, 0xf3, 0xe6, 0x3d, 0xf9, 0x8a, 0xf2, 0xd9, 0x29, 0xa3,
++      0x03, 0xa8, 0x47, 0xc4, 0xec, 0x8b, 0xb2, 0xcc, 0x31, 0x46, 0x9f, 0xe9,
++      0x94, 0x09, 0xe8, 0xb5, 0x23, 0x95, 0x71, 0xf9, 0x72, 0xa5, 0x4b, 0xe1,
++      0x86, 0xbf, 0xf6, 0xd3, 0x89, 0x61, 0x2b, 0x90, 0x07, 0x81, 0x7f, 0x66,
++      0xfa, 0xdb, 0xe4, 0xcd, 0x51, 0x9d, 0xfb, 0x7b, 0x83, 0xc9, 0x8d, 0x2e,
++      0xf3, 0x55, 0x39, 0x1f, 0xe8, 0x7d, 0x0b, 0xbe, 0x80, 0xd5, 0x2e, 0x33,
++      0xf1, 0x2e, 0xf9, 0xb8, 0x8f, 0xf2, 0x36, 0x5f, 0x7d, 0x63, 0x9c, 0x8b,
++      0x37, 0xeb, 0x91, 0x37, 0xcd, 0xd8, 0x5f, 0x34, 0xe5, 0xbf, 0xe9, 0x6d,
++      0xa2, 0xc5, 0x9a, 0xcb, 0x44, 0xd4, 0xfc, 0xe6, 0x6b, 0xd4, 0x6f, 0x6c,
++      0x03, 0x7d, 0xd2, 0xe0, 0x39, 0x51, 0x59, 0xd6, 0xa0, 0x5f, 0x4a, 0x55,
++      0xb1, 0xce, 0x65, 0x80, 0xa8, 0x3d, 0x8d, 0x3f, 0x4b, 0x90, 0xaf, 0xd9,
++      0xaa, 0x8a, 0x59, 0xaa, 0xbc, 0xed, 0x59, 0x60, 0x5d, 0xf8, 0xc4, 0xc0,
++      0x10, 0x26, 0x7f, 0xa5, 0x93, 0xf1, 0x90, 0x66, 0x1d, 0x16, 0xfe, 0x2f,
++      0x9d, 0xff, 0xd4, 0x2b, 0xdd, 0x65, 0xac, 0x4b, 0x88, 0xb9, 0xc1, 0x53,
++      0x8c, 0x99, 0x57, 0xeb, 0x14, 0xae, 0x09, 0x75, 0x4f, 0x73, 0xbe, 0x78,
++      0x88, 0x39, 0xb8, 0x67, 0x69, 0x2f, 0xa4, 0x1c, 0x03, 0xa6, 0xed, 0x38,
++      0x03, 0xdb, 0x5d, 0xcd, 0x42, 0x56, 0xc6, 0x55, 0xde, 0xe7, 0x3c, 0xb0,
++      0xdb, 0x1f, 0xf8, 0x7f, 0x2a, 0xf6, 0xd3, 0x07, 0x64, 0xad, 0xda, 0x01,
++      0x7e, 0xd0, 0x2e, 0x44, 0x95, 0x7f, 0x7d, 0xe3, 0x28, 0xed, 0x1d, 0x6d,
++      0x89, 0x5e, 0x8b, 0xad, 0xda, 0xf7, 0x7a, 0xf5, 0xb7, 0x33, 0x7b, 0x65,
++      0xb3, 0x16, 0xda, 0x42, 0xf8, 0x87, 0xd5, 0xa8, 0xb1, 0xcb, 0x9d, 0xd0,
++      0xdd, 0xdf, 0x8f, 0xd6, 0x95, 0xaf, 0xce, 0xf9, 0xd3, 0x06, 0x45, 0x99,
++      0x17, 0xd7, 0x59, 0xf7, 0x38, 0xf7, 0x66, 0x1b, 0xa4, 0x71, 0x87, 0x7b,
++      0x90, 0xe3, 0x31, 0x87, 0x82, 0x73, 0x8c, 0x4b, 0xf4, 0xfc, 0x63, 0x62,
++      0xc3, 0x6f, 0x89, 0x2c, 0x11, 0xeb, 0xdd, 0xec, 0xbb, 0x44, 0x2e, 0xba,
++      0xe6, 0x5b, 0xec, 0x41, 0x8d, 0x65, 0x32, 0x28, 0xeb, 0xe1, 0xf7, 0xd9,
++      0xfc, 0x35, 0xdb, 0xcd, 0xd0, 0xb7, 0xd8, 0xd5, 0x96, 0xe2, 0xef, 0xff,
++      0x01, 0x37, 0x64, 0x26, 0x2b, 0x1c, 0x4c, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_COM_b09FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_COM_b09FwRodata[(0x30/4) + 1] = {
+-      0x80080100, 0x80080080, 0x80080000, 0x80080240, 0x08000ea4, 0x08000efc,
+-      0x08000f40, 0x08000fd4, 0x08001018, 0x80080100, 0x80080080, 0x80080000,
++      0x80080100, 0x80080080, 0x80080000, 0x80080240, 0x08000e20, 0x08000e78,
++      0x08000ebc, 0x08000f50, 0x08000f94, 0x80080100, 0x80080080, 0x80080000,
+       0x00000000 };
+ static struct fw_info bnx2_com_fw_09 = {
+-      /* Firmware version: 4.6.15 */
++      /* Firmware version: 4.4.23 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0xf,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x17,
+       .start_addr                     = 0x080000f8,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x4a7c,
++      .text_len                       = 0x4c18,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_COM_b09FwText,
+       .gz_text_len                    = sizeof(bnx2_COM_b09FwText),
+@@ -865,1189 +866,1210 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_COM_b09FwData,
+-      .sbss_addr                      = 0x08004ae0,
++      .sbss_addr                      = 0x08004c60,
+       .sbss_len                       = 0x38,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08004b18,
+-      .bss_len                        = 0xc0,
++      .bss_addr                       = 0x08004c98,
++      .bss_len                        = 0xbc,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x08004a7c,
++      .rodata_addr                    = 0x08004c18,
+       .rodata_len                     = 0x30,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_COM_b09FwRodata,
+ };
+ static u8 bnx2_CP_b09FwText[] = {
+-      0xa5, 0xbc, 0x0d, 0x74, 0x1c, 0xe5, 0x95, 0x26, 0xfc, 0x54, 0x75, 0xb7,
+-      0xd4, 0x92, 0x5a, 0x52, 0x49, 0x6e, 0x8b, 0x36, 0x68, 0x70, 0xb5, 0x55,
+-      0x2d, 0x0b, 0x4b, 0x40, 0xb5, 0x24, 0x3b, 0xed, 0x6c, 0x83, 0x3b, 0xb6,
+-      0x6c, 0x64, 0x63, 0x40, 0x36, 0x06, 0xc4, 0xb7, 0xfe, 0x3e, 0x7a, 0xfc,
+-      0x03, 0x86, 0x38, 0x19, 0x91, 0xcd, 0xce, 0x0a, 0xd6, 0x59, 0x55, 0xe4,
+-      0x3f, 0xd9, 0x6e, 0x75, 0x4b, 0x42, 0xfe, 0xe1, 0xec, 0x9c, 0xa5, 0x2d,
+-      0xcb, 0x96, 0x21, 0xad, 0x16, 0x24, 0x6c, 0xc6, 0x39, 0x27, 0x09, 0x1a,
+-      0x63, 0x83, 0x0d, 0x18, 0xc8, 0x24, 0xf9, 0x86, 0xc9, 0xd9, 0x5d, 0x34,
+-      0xc6, 0xfc, 0x19, 0x70, 0x1c, 0x92, 0xc9, 0x9a, 0x19, 0x4c, 0xed, 0x73,
+-      0xab, 0xd5, 0xb6, 0xec, 0x30, 0xc9, 0xcc, 0x59, 0x9d, 0xd3, 0xa7, 0xab,
+-      0xab, 0xde, 0x9f, 0xfb, 0xde, 0xf7, 0xde, 0xe7, 0x3e, 0xf7, 0x7d, 0xdf,
+-      0x92, 0x0e, 0x14, 0x63, 0xf2, 0xaf, 0x94, 0x9f, 0x9b, 0x9a, 0x3b, 0xd6,
+-      0xce, 0x0d, 0xdf, 0x34, 0x4f, 0x7e, 0xbb, 0xcb, 0x0b, 0xdc, 0xf8, 0xb2,
+-      0xbf, 0x28, 0x22, 0x57, 0xdf, 0xd2, 0xbf, 0xb4, 0xe0, 0xbf, 0xf0, 0x17,
+-      0x41, 0x50, 0xe1, 0x57, 0xfd, 0xe4, 0x4f, 0x17, 0xa0, 0xe5, 0xfb, 0x97,
+-      0x0f, 0xbc, 0x6a, 0xd4, 0xb8, 0x77, 0xa1, 0x01, 0xaf, 0x2b, 0xba, 0xaa,
+-      0x7d, 0xad, 0x01, 0xc4, 0x32, 0xf5, 0xfa, 0x22, 0x5c, 0xb4, 0x2d, 0xbf,
+-      0x1b, 0x72, 0xff, 0xcf, 0xa2, 0x9f, 0x3f, 0xf5, 0x93, 0xaf, 0x04, 0xcf,
+-      0xa7, 0x5d, 0xf0, 0x6a, 0x51, 0x0b, 0x5a, 0x2d, 0xbc, 0xd5, 0xac, 0xf3,
+-      0x57, 0xb3, 0xb7, 0xa9, 0x28, 0xcb, 0xb7, 0x15, 0x0c, 0xa4, 0x11, 0xd4,
+-      0x2c, 0x04, 0xeb, 0x2c, 0x20, 0xee, 0x8e, 0x22, 0x5e, 0x18, 0xf5, 0xa2,
+-      0xc0, 0x28, 0x40, 0x5c, 0xeb, 0xd4, 0xb7, 0x34, 0x03, 0x0b, 0x13, 0x5e,
+-      0xfd, 0x74, 0x06, 0x58, 0x9b, 0xf0, 0x62, 0xc2, 0xe5, 0xd3, 0xdf, 0xc9,
+-      0x44, 0xca, 0x72, 0xfa, 0x88, 0xc1, 0x65, 0x20, 0xae, 0x46, 0xe5, 0x3e,
+-      0xf4, 0x45, 0x19, 0xa9, 0x0b, 0x6c, 0x4b, 0x7d, 0x5b, 0x7f, 0x37, 0x11,
+-      0xd4, 0xb6, 0xa1, 0x3e, 0x30, 0x84, 0x42, 0xc4, 0xfd, 0xc1, 0x3a, 0xe0,
+-      0xf3, 0x8b, 0x3b, 0x53, 0x0a, 0x3c, 0xc6, 0x34, 0xb4, 0xec, 0x07, 0x76,
+-      0xa4, 0x82, 0x31, 0x83, 0xc3, 0xeb, 0x19, 0x93, 0xba, 0x41, 0x2d, 0xcd,
+-      0xe7, 0x5b, 0x52, 0xc0, 0xd6, 0xd4, 0x34, 0x6c, 0xeb, 0xb3, 0xf1, 0xa2,
+-      0x59, 0xa3, 0x1d, 0x60, 0x0f, 0xdd, 0xce, 0xf3, 0x69, 0xb0, 0xd2, 0xf2,
+-      0xfc, 0x03, 0xfb, 0x27, 0xb3, 0x35, 0x3c, 0x3b, 0xe6, 0xc7, 0x0b, 0x63,
+-      0x15, 0xd8, 0xd1, 0x57, 0x81, 0xed, 0x7d, 0x75, 0x50, 0x0d, 0x1b, 0x75,
+-      0xe1, 0x3a, 0x14, 0xcc, 0xb7, 0xf1, 0x8e, 0xd9, 0x80, 0xad, 0x6c, 0xf8,
+-      0xcd, 0x86, 0x2a, 0xac, 0xd1, 0xaa, 0xb1, 0xc5, 0xf8, 0x0a, 0x72, 0x63,
+-      0xfd, 0xfc, 0x62, 0x2a, 0x85, 0xb8, 0x27, 0xea, 0x56, 0x55, 0xe3, 0x56,
+-      0x9c, 0xdb, 0x1d, 0xc5, 0x27, 0xbb, 0xb1, 0xba, 0x0c, 0xb6, 0x9d, 0x09,
+-      0x87, 0xda, 0x36, 0x2a, 0x9a, 0xfe, 0x4c, 0x86, 0x02, 0xad, 0x74, 0xb3,
+-      0x3d, 0xe8, 0x43, 0x99, 0xa9, 0x53, 0xc1, 0xfe, 0x52, 0xec, 0x37, 0x25,
+-      0xb2, 0x04, 0xf0, 0x93, 0xd9, 0x7f, 0x41, 0x7b, 0xc8, 0x8d, 0x69, 0x6b,
+-      0xea, 0x2d, 0xca, 0xa4, 0x53, 0x9e, 0x6a, 0xfc, 0x60, 0x2c, 0x80, 0xef,
+-      0x53, 0xb6, 0xe7, 0xc6, 0x44, 0xc6, 0xe0, 0x3e, 0x0b, 0x15, 0x18, 0xee,
+-      0xab, 0xc6, 0xb3, 0x46, 0x03, 0x9e, 0xa3, 0x8c, 0x9b, 0xcd, 0x3a, 0xac,
+-      0x89, 0xdc, 0x4f, 0x79, 0x14, 0xac, 0x6c, 0xf8, 0xf3, 0x49, 0xb9, 0x82,
+-      0x3a, 0x54, 0x15, 0xb1, 0xca, 0x60, 0x9d, 0xae, 0x4a, 0x9b, 0x97, 0xe5,
+-      0xed, 0x4d, 0xc1, 0xf2, 0x46, 0x45, 0xe6, 0x5b, 0x91, 0xa1, 0xbc, 0xdf,
+-      0xdb, 0x1d, 0x32, 0x37, 0xa8, 0x58, 0xee, 0xa3, 0xcc, 0x8f, 0x84, 0x43,
+-      0x91, 0x39, 0x94, 0x79, 0x24, 0xa3, 0x72, 0x3c, 0x7e, 0xfd, 0x10, 0x65,
+-      0x8f, 0xad, 0x54, 0x29, 0x3b, 0x65, 0x49, 0x51, 0x96, 0x14, 0x65, 0x49,
+-      0x51, 0x16, 0x47, 0xee, 0x3a, 0xca, 0x9c, 0x9b, 0xa3, 0xa1, 0xcc, 0x04,
+-      0xe5, 0x9d, 0x2a, 0x67, 0x35, 0x65, 0x47, 0xbc, 0x22, 0xfa, 0x6d, 0xbd,
+-      0x26, 0x49, 0x7d, 0xa7, 0x6c, 0xfb, 0x4d, 0xd3, 0xb6, 0x3f, 0x35, 0x7d,
+-      0xd4, 0x5f, 0x8a, 0x76, 0x90, 0x97, 0x67, 0xa6, 0x55, 0x10, 0x45, 0x0b,
+-      0x4d, 0xd0, 0x3e, 0xde, 0x1c, 0x8a, 0x54, 0x2a, 0x2a, 0xdc, 0x86, 0xa6,
+-      0xcf, 0xce, 0x06, 0x4d, 0xea, 0x47, 0x0f, 0x65, 0xa1, 0x1b, 0x59, 0xb6,
+-      0x75, 0x45, 0xbf, 0x41, 0x6d, 0x1c, 0xd2, 0xaf, 0xce, 0xfe, 0x27, 0x26,
+-      0xe7, 0x4e, 0xda, 0x0f, 0xb0, 0x4f, 0xe9, 0x5f, 0xda, 0xb6, 0xed, 0xdf,
+-      0x98, 0x30, 0x34, 0x84, 0xac, 0x7e, 0xda, 0x9f, 0x2b, 0xaa, 0xe9, 0x1d,
+-      0x19, 0x3e, 0xbf, 0xd4, 0x46, 0x6e, 0x3e, 0xd6, 0x64, 0xf4, 0xc9, 0x31,
+-      0x04, 0x29, 0x82, 0xd8, 0x41, 0x20, 0xee, 0x8b, 0x6a, 0x22, 0x7b, 0xdb,
+-      0xbe, 0xde, 0x2e, 0x7b, 0x86, 0x21, 0xba, 0x32, 0x3a, 0x67, 0xb8, 0x7c,
+-      0x91, 0x73, 0x73, 0x1f, 0xb5, 0x4a, 0x9b, 0xc3, 0x28, 0x36, 0xe0, 0x2b,
+-      0x32, 0xd0, 0x96, 0x1c, 0x2d, 0xb6, 0x4a, 0xa2, 0x3f, 0xbe, 0xbb, 0x77,
+-      0xd4, 0x8b, 0xe2, 0x51, 0x03, 0x45, 0xa3, 0x4f, 0xbb, 0x51, 0xd6, 0x80,
+-      0x5d, 0x63, 0x0f, 0xb9, 0x73, 0x63, 0x5b, 0x32, 0x39, 0x46, 0xc7, 0xf6,
+-      0xbd, 0xef, 0x26, 0xce, 0xdb, 0x05, 0x46, 0xd1, 0x7d, 0xae, 0xa8, 0xa1,
+-      0x1f, 0x02, 0xce, 0xaf, 0x69, 0x5e, 0x84, 0x6e, 0x4d, 0xc1, 0x4c, 0xe3,
+-      0x95, 0x12, 0x94, 0x45, 0x60, 0x8d, 0x55, 0xc5, 0x0b, 0xa2, 0xfe, 0x38,
+-      0xe7, 0x06, 0x2f, 0x27, 0xd2, 0xf0, 0xf4, 0xda, 0xb6, 0x94, 0x7d, 0x07,
+-      0x77, 0xdf, 0xad, 0x46, 0x8f, 0xde, 0xec, 0x41, 0x0b, 0xcb, 0x63, 0xd3,
+-      0x89, 0xe6, 0x4f, 0x15, 0x75, 0x77, 0x1b, 0xac, 0x11, 0x17, 0x62, 0x5a,
+-      0x9c, 0xdf, 0xd7, 0x5f, 0xbf, 0x3c, 0xd2, 0x86, 0xc4, 0xc8, 0x05, 0xde,
+-      0x77, 0xf3, 0x5e, 0x04, 0xc9, 0xd4, 0xf5, 0xd7, 0xdf, 0x11, 0x89, 0xa3,
+-      0x77, 0x44, 0xae, 0xdd, 0x18, 0xaf, 0x88, 0x63, 0xfb, 0x5e, 0x1d, 0xe5,
+-      0x46, 0x1b, 0x52, 0x23, 0x72, 0x6d, 0xdb, 0x67, 0xcc, 0xef, 0x62, 0x5f,
+-      0x03, 0xfd, 0xff, 0x9a, 0x36, 0x6c, 0xdb, 0x6b, 0xa1, 0xd0, 0xb0, 0xa8,
+-      0x7b, 0xc5, 0xfd, 0xf7, 0x0d, 0x0a, 0xf4, 0xbb, 0xe1, 0x2e, 0x30, 0x44,
+-      0x6f, 0x11, 0xf7, 0xfa, 0x44, 0x54, 0x9b, 0x69, 0xd8, 0xf6, 0x90, 0x39,
+-      0x07, 0x0f, 0xb4, 0xad, 0x81, 0x75, 0xc0, 0x07, 0x6b, 0x95, 0x7c, 0xb7,
+-      0x51, 0x87, 0x6b, 0xd0, 0x7d, 0x60, 0x0d, 0x7a, 0x9e, 0xa0, 0xe3, 0x56,
+-      0x68, 0xce, 0x3c, 0xfd, 0x64, 0xb6, 0xc8, 0x24, 0xf2, 0xb5, 0xf3, 0x23,
+-      0xba, 0xfd, 0x4b, 0x7e, 0x4b, 0x99, 0x0b, 0x36, 0xa6, 0x5f, 0x2e, 0xb3,
+-      0x9d, 0x65, 0xb6, 0x5d, 0x51, 0x26, 0x82, 0xa7, 0xc6, 0x44, 0x17, 0xa2,
+-      0xb2, 0x3f, 0xa5, 0x8b, 0x9f, 0xda, 0xdd, 0x7e, 0xd1, 0x85, 0xd5, 0xee,
+-      0x41, 0xb0, 0xed, 0x41, 0xc5, 0x8d, 0xa5, 0xbd, 0x60, 0x1d, 0x3a, 0x41,
+-      0x71, 0x30, 0x56, 0xab, 0x44, 0x51, 0xdc, 0xab, 0x60, 0x69, 0xb8, 0x08,
+-      0x7a, 0x85, 0xb4, 0xf7, 0x4b, 0xdb, 0xd2, 0x44, 0xde, 0x13, 0x28, 0xe1,
+-      0xfd, 0x75, 0xe1, 0x9f, 0x13, 0xcf, 0x44, 0xa6, 0x30, 0xcb, 0xaf, 0xe0,
+-      0xfd, 0x37, 0xa6, 0xfc, 0x96, 0x72, 0xb6, 0xbd, 0x99, 0x3e, 0xdf, 0x43,
+-      0x1b, 0xdf, 0x9e, 0x8a, 0x05, 0xa9, 0x25, 0xcb, 0x13, 0xe5, 0xfd, 0x68,
+-      0xa8, 0xb5, 0x1b, 0xd2, 0x0f, 0x94, 0xe2, 0x28, 0xdc, 0x99, 0xe6, 0x09,
+-      0xef, 0xa9, 0x84, 0xd1, 0xfe, 0x8c, 0xe2, 0xa1, 0xb1, 0x4b, 0x3f, 0x13,
+-      0xde, 0x37, 0x12, 0x0a, 0xde, 0x37, 0x42, 0x1d, 0x67, 0x95, 0x09, 0xef,
+-      0xeb, 0x19, 0x0d, 0x33, 0x7a, 0x83, 0xed, 0x96, 0x12, 0xc1, 0x8f, 0x32,
+-      0x7e, 0x04, 0x7a, 0xa3, 0x38, 0x92, 0x31, 0xf1, 0xf4, 0x15, 0x38, 0xf0,
+-      0xa5, 0x7f, 0x96, 0x8b, 0x63, 0x5f, 0x97, 0xd0, 0xd1, 0x6d, 0x5e, 0xb4,
+-      0x63, 0x1a, 0xe2, 0xe5, 0xd1, 0x09, 0xef, 0x27, 0xbd, 0x50, 0xca, 0xa2,
+-      0x46, 0x20, 0xab, 0xfc, 0x83, 0x1d, 0xf7, 0x4b, 0x31, 0xca, 0xe7, 0x60,
+-      0x59, 0x94, 0x76, 0x47, 0x8c, 0x4a, 0x9d, 0xb7, 0x4b, 0x68, 0xb3, 0x05,
+-      0xd1, 0x6b, 0x31, 0x32, 0x68, 0xe0, 0xe9, 0x84, 0x6d, 0x7f, 0x6c, 0x8e,
+-      0x47, 0x7c, 0x30, 0xda, 0x3e, 0x42, 0x30, 0x36, 0x87, 0x7a, 0x39, 0x91,
+-      0x31, 0x30, 0x9c, 0x88, 0xe2, 0xc5, 0x44, 0x8d, 0xb6, 0x19, 0x4d, 0x88,
+-      0x05, 0x72, 0x31, 0x64, 0x94, 0x72, 0x0f, 0x85, 0xda, 0x50, 0x1e, 0x8d,
+-      0xe0, 0x28, 0xe5, 0x3e, 0x37, 0x57, 0xda, 0x31, 0xf1, 0xfa, 0xbf, 0x42,
+-      0x56, 0xe2, 0x3b, 0x9e, 0xa4, 0xac, 0x91, 0xa6, 0x8b, 0x36, 0xa6, 0x79,
+-      0x71, 0xda, 0xbc, 0x86, 0x76, 0x08, 0xab, 0x28, 0xea, 0x75, 0xf7, 0x24,
+-      0x34, 0x1c, 0xce, 0xf8, 0xdc, 0x9b, 0x13, 0x7e, 0x1c, 0xa0, 0xbf, 0xcd,
+-      0x88, 0xc2, 0x0a, 0xb0, 0xdd, 0x19, 0xc4, 0xb5, 0xec, 0x60, 0x35, 0xc6,
+-      0x06, 0x83, 0xe6, 0x1b, 0x4a, 0x00, 0x87, 0x86, 0xaf, 0xc5, 0xe8, 0xa0,
+-      0x82, 0x91, 0x10, 0x65, 0xe7, 0xf5, 0xf7, 0x06, 0xaf, 0x47, 0x66, 0xd0,
+-      0x85, 0x5d, 0x8e, 0x5e, 0x1d, 0x9c, 0x99, 0xfc, 0xbe, 0x16, 0xe9, 0x61,
+-      0xb8, 0xe7, 0xf4, 0x6a, 0x78, 0x26, 0xe3, 0x76, 0x1b, 0xbd, 0x7e, 0x0c,
+-      0x67, 0x7e, 0xca, 0x79, 0x93, 0xb6, 0x75, 0x0c, 0x25, 0x0e, 0x39, 0x73,
+-      0x58, 0x1e, 0x65, 0x63, 0xb9, 0xf8, 0xca, 0x58, 0xa6, 0x33, 0xce, 0x34,
+-      0x13, 0x87, 0xc4, 0xc7, 0xbd, 0xc4, 0x20, 0xf1, 0xf1, 0xb7, 0x14, 0x94,
+-      0x35, 0x63, 0xf3, 0x58, 0xfe, 0xb9, 0x42, 0xfb, 0x77, 0x63, 0x9d, 0xd6,
+-      0x80, 0x44, 0x4a, 0xec, 0x34, 0x8f, 0xcb, 0x72, 0x2d, 0xf3, 0x5f, 0x0c,
+-      0xeb, 0x60, 0x31, 0x76, 0xd1, 0xc7, 0x76, 0xee, 0x96, 0xfb, 0xb6, 0xfd,
+-      0x50, 0xb8, 0x9c, 0x36, 0x86, 0xc5, 0x45, 0x08, 0x99, 0x1f, 0x38, 0xb2,
+-      0x59, 0x38, 0x94, 0x91, 0x18, 0xaa, 0x33, 0xbe, 0x9d, 0x60, 0x5f, 0xcd,
+-      0xec, 0xc7, 0xc4, 0x4f, 0x39, 0x37, 0x7f, 0x3d, 0x56, 0x87, 0x1f, 0x8e,
+-      0x19, 0xf8, 0xef, 0x63, 0x3a, 0x9e, 0xbf, 0x02, 0xd7, 0xef, 0xa6, 0xae,
+-      0x04, 0xc3, 0x1a, 0xb0, 0x25, 0x55, 0x80, 0x6d, 0x83, 0xc5, 0xd8, 0x3c,
+-      0x58, 0x53, 0xf7, 0x22, 0xf1, 0xf8, 0x87, 0xe6, 0x1d, 0x18, 0xaf, 0x6c,
+-      0x76, 0x7c, 0x66, 0x07, 0xef, 0xef, 0x1c, 0xac, 0xe1, 0x1c, 0xda, 0xb6,
+-      0x1a, 0xae, 0x8f, 0x1c, 0x25, 0xbe, 0x4f, 0xf8, 0x83, 0xfa, 0xb8, 0x1a,
+-      0xd4, 0x63, 0xf0, 0x20, 0xd1, 0xa0, 0xc2, 0x9a, 0x1e, 0x4c, 0xd3, 0x8b,
+-      0xe1, 0x37, 0x1e, 0xe2, 0xd8, 0x82, 0xba, 0xa5, 0x36, 0xd0, 0x7e, 0x19,
+-      0x33, 0x54, 0x93, 0xf8, 0x52, 0x8c, 0x4f, 0x06, 0x83, 0x3d, 0x96, 0xba,
+-      0x02, 0x56, 0xa5, 0x6d, 0x7f, 0x3f, 0x8c, 0x8e, 0x6b, 0xa2, 0x88, 0x4d,
+-      0x67, 0x2c, 0xb8, 0x3e, 0x1a, 0x05, 0xe3, 0x18, 0xce, 0xf5, 0x1a, 0x81,
+-      0xbf, 0x53, 0xee, 0xc6, 0x7f, 0x6c, 0x0b, 0xea, 0xba, 0x5a, 0x6f, 0x1d,
+-      0x50, 0x49, 0x36, 0xaa, 0xa0, 0x07, 0xa2, 0xcb, 0xd0, 0xe9, 0xf0, 0x04,
+-      0x05, 0x9a, 0x61, 0x62, 0x73, 0x8a, 0x95, 0xfc, 0x35, 0xed, 0xfd, 0x6a,
+-      0xcd, 0x05, 0x53, 0x0d, 0x9e, 0x68, 0x53, 0x89, 0xb7, 0x4d, 0xe7, 0x6c,
+-      0xbd, 0xca, 0xb6, 0x1b, 0x9b, 0xa4, 0x4f, 0x1d, 0x95, 0x9c, 0xe7, 0x0a,
+-      0xce, 0x73, 0x63, 0xb6, 0x18, 0x67, 0x07, 0x61, 0x5d, 0x13, 0x0d, 0xb6,
+-      0x3e, 0xa2, 0x16, 0xe3, 0xc3, 0xe1, 0x62, 0xbc, 0x33, 0xe8, 0xc6, 0x07,
+-      0x83, 0xb6, 0xbd, 0xde, 0x2c, 0x47, 0x41, 0x18, 0xd3, 0x0b, 0x10, 0x3a,
+-      0x3f, 0x04, 0x0b, 0x5f, 0xb0, 0xec, 0xef, 0x06, 0x03, 0xf8, 0xc7, 0xc1,
+-      0xaf, 0xe2, 0xf9, 0xca, 0xd8, 0xc9, 0x69, 0x8c, 0x91, 0x17, 0x68, 0x3f,
+-      0xe7, 0x12, 0xc1, 0xf6, 0x19, 0xae, 0x60, 0x27, 0x79, 0xcb, 0x86, 0xc7,
+-      0x94, 0x60, 0xfc, 0x0d, 0x25, 0xa8, 0xf7, 0x2a, 0x7e, 0x7c, 0x44, 0x3b,
+-      0x3d, 0x93, 0xa9, 0x89, 0xfc, 0x9c, 0xfd, 0xff, 0xde, 0xfc, 0xa1, 0x3d,
+-      0x5e, 0x25, 0x3a, 0x14, 0x7d, 0x51, 0xe7, 0x29, 0xea, 0x9c, 0xfe, 0xfb,
+-      0xc3, 0x14, 0x75, 0x4e, 0x79, 0x9e, 0xff, 0x83, 0xf8, 0x25, 0xf3, 0x15,
+-      0xe1, 0x3c, 0x5e, 0x87, 0xff, 0xe2, 0x8c, 0xed, 0xa4, 0xfd, 0x9f, 0xfc,
+-      0x32, 0xbe, 0xcf, 0xfd, 0x39, 0x0c, 0x92, 0x71, 0x9e, 0xb0, 0xe3, 0x9a,
+-      0x8c, 0x51, 0xc6, 0xea, 0xe8, 0x52, 0xef, 0x50, 0x1e, 0x55, 0x51, 0x6c,
+-      0xdb, 0x4f, 0x98, 0x93, 0xcf, 0xfd, 0xf9, 0xb1, 0x7e, 0x95, 0xf7, 0x65,
+-      0xbc, 0x67, 0x5d, 0xa2, 0x7b, 0x5d, 0xbd, 0x89, 0xbf, 0x83, 0x56, 0x0c,
+-      0xa7, 0x0b, 0xf9, 0xbb, 0x2e, 0x76, 0xe9, 0xf7, 0x93, 0xa5, 0x57, 0x3e,
+-      0xa7, 0x9d, 0x3a, 0xfd, 0xdd, 0xcd, 0xdf, 0x32, 0x96, 0x37, 0x69, 0x37,
+-      0x5f, 0x66, 0x27, 0x62, 0x23, 0x75, 0xb4, 0xa7, 0x33, 0x12, 0x57, 0x2c,
+-      0x7f, 0xd4, 0x6b, 0xa9, 0x51, 0xe8, 0x74, 0x7d, 0xaf, 0x12, 0xed, 0x80,
+-      0x9e, 0xb1, 0x70, 0x4f, 0xb3, 0x0b, 0xdf, 0x6a, 0x56, 0x30, 0xcd, 0xe8,
+-      0x40, 0xdf, 0x3c, 0xcb, 0xae, 0x30, 0xf6, 0xab, 0xe2, 0x03, 0x05, 0x49,
+-      0x58, 0xf4, 0x3b, 0x44, 0xc8, 0x95, 0xca, 0xff, 0x9d, 0x82, 0xd3, 0xe1,
+-      0x10, 0x6d, 0x6e, 0x0b, 0x39, 0x15, 0x50, 0x98, 0x84, 0xb7, 0x94, 0xf3,
+-      0x3f, 0xda, 0x0b, 0x6f, 0x31, 0x7d, 0x7f, 0x59, 0x6f, 0x4d, 0xc7, 0x7b,
+-      0xc4, 0x8a, 0xac, 0x12, 0x6c, 0xa7, 0xbe, 0xcd, 0x32, 0x25, 0xd8, 0x7a,
+-      0x3b, 0xf5, 0x5d, 0xab, 0x48, 0x3f, 0x51, 0xd4, 0x65, 0xb6, 0x10, 0x73,
+-      0xe4, 0x3a, 0x02, 0x23, 0xf3, 0xab, 0x49, 0xd9, 0xe1, 0xf5, 0x50, 0x86,
+-      0x83, 0x89, 0x77, 0xed, 0xb4, 0x16, 0xd4, 0xd3, 0xce, 0xef, 0x0d, 0xfc,
+-      0x0d, 0x6f, 0x41, 0x74, 0x23, 0x5e, 0x4a, 0x3c, 0xe5, 0xcf, 0x97, 0xcb,
+-      0xc9, 0x7a, 0xb5, 0x3c, 0xff, 0xd3, 0x8e, 0xf9, 0x73, 0xf2, 0xf8, 0x92,
+-      0x5b, 0x40, 0x8e, 0xe2, 0x2d, 0x64, 0x5f, 0xef, 0x3b, 0xf5, 0x23, 0xac,
+-      0x5f, 0xd3, 0xde, 0xab, 0x04, 0xeb, 0x3e, 0x42, 0xbd, 0xfe, 0x3d, 0x04,
+-      0x5b, 0x8f, 0x92, 0x5b, 0x1a, 0x93, 0xf2, 0x84, 0x32, 0x0e, 0x9f, 0x71,
+-      0xe4, 0x99, 0x95, 0x81, 0xe2, 0xea, 0x85, 0x6f, 0xa6, 0x51, 0x8b, 0x2e,
+-      0x67, 0x4e, 0xa1, 0x04, 0x7a, 0x75, 0x94, 0x91, 0xbf, 0x04, 0x46, 0x81,
+-      0xb1, 0x01, 0x72, 0xb9, 0x70, 0x0d, 0xbe, 0xc9, 0x58, 0x30, 0x83, 0x65,
+-      0x1e, 0xd3, 0x2e, 0xe1, 0x97, 0xd2, 0x93, 0x20, 0xc0, 0x4c, 0xcf, 0xf1,
+-      0xb2, 0xf8, 0xbd, 0x88, 0xc9, 0xbd, 0x27, 0x13, 0x50, 0x52, 0x89, 0xe0,
+-      0x3e, 0xc0, 0x18, 0x0f, 0xbb, 0x62, 0x0f, 0x07, 0xd0, 0x85, 0x73, 0xe1,
+-      0x50, 0x3c, 0xab, 0x84, 0xda, 0x07, 0x14, 0xd3, 0xbb, 0x8b, 0xfd, 0x6d,
+-      0x67, 0x99, 0x1d, 0xfc, 0x9c, 0x35, 0x0c, 0x73, 0x85, 0x12, 0xbb, 0xa1,
+-      0x80, 0x65, 0x6a, 0xc2, 0x21, 0xf2, 0xcc, 0xd0, 0x85, 0x95, 0x30, 0xbd,
+-      0x4f, 0x65, 0xa4, 0xad, 0x88, 0xb2, 0x25, 0xfb, 0xa4, 0x9a, 0xc3, 0xa3,
+-      0xdf, 0x4f, 0xea, 0xec, 0x1d, 0xf9, 0xed, 0xf4, 0xed, 0xee, 0xfd, 0xaf,
+-      0x85, 0x7f, 0x78, 0xef, 0xaf, 0xa7, 0x5d, 0x79, 0xaf, 0x5e, 0x1b, 0xa6,
+-      0xff, 0xb9, 0x8c, 0x22, 0xce, 0x9d, 0xf0, 0xa3, 0x58, 0x9d, 0x07, 0x72,
+-      0xcf, 0x85, 0xb4, 0x3b, 0x16, 0x70, 0xe1, 0x73, 0x3b, 0xb6, 0x4a, 0xee,
+-      0x15, 0x23, 0xde, 0x56, 0x1f, 0x70, 0xa3, 0x3e, 0xb2, 0x95, 0x58, 0x30,
+-      0xb1, 0x6a, 0x21, 0x9f, 0x85, 0xcc, 0x17, 0x51, 0xa3, 0x6f, 0x85, 0x5c,
+-      0x7f, 0x46, 0x9b, 0x5d, 0x28, 0x75, 0x59, 0x26, 0xc7, 0x7d, 0x04, 0x6b,
+-      0xb6, 0x98, 0x36, 0x5e, 0x22, 0x4c, 0x14, 0x46, 0x8f, 0x28, 0xa7, 0x13,
+-      0x5f, 0xd8, 0x31, 0x37, 0x96, 0xd3, 0x2f, 0x4d, 0xea, 0x59, 0xf7, 0x46,
+-      0x43, 0xfa, 0x09, 0x66, 0x0a, 0xae, 0xa8, 0xa5, 0x4c, 0x64, 0xb6, 0x28,
+-      0xef, 0x66, 0x7a, 0x94, 0x33, 0x19, 0xa9, 0x7b, 0x44, 0x79, 0x27, 0x23,
+-      0xf1, 0xb0, 0x5a, 0x3f, 0x4e, 0x7e, 0x43, 0x4e, 0xa5, 0x6e, 0x36, 0xa1,
+-      0x6c, 0x33, 0xcb, 0xc8, 0xf3, 0x8d, 0xba, 0x21, 0xca, 0x7b, 0xb0, 0x19,
+-      0xe6, 0x76, 0xd3, 0x83, 0x09, 0x0d, 0xbe, 0xcd, 0xa6, 0x5b, 0x7e, 0x33,
+-      0x1f, 0x90, 0xba, 0xd5, 0xfa, 0xd6, 0xcc, 0x45, 0xfa, 0x57, 0xee, 0xf7,
+-      0xc1, 0xe6, 0xfc, 0xbd, 0xdf, 0xda, 0xe3, 0xab, 0x54, 0xfe, 0xfe, 0x77,
+-      0x2e, 0x0e, 0x85, 0x75, 0xa7, 0xf2, 0x73, 0xe1, 0x52, 0x2a, 0xf9, 0x63,
+-      0x05, 0x2c, 0x2d, 0x68, 0xa5, 0x99, 0x0e, 0x6d, 0x4e, 0x35, 0xd2, 0xdf,
+-      0x02, 0x8c, 0x95, 0x51, 0xe2, 0x3b, 0x79, 0x2f, 0xfb, 0x2c, 0x30, 0x7c,
+-      0x58, 0x9c, 0xa8, 0x71, 0xe5, 0xf4, 0xa7, 0x12, 0xc3, 0x5c, 0x8c, 0xe9,
+-      0xc2, 0xf1, 0xae, 0xe6, 0xdc, 0xd5, 0xfa, 0x07, 0x94, 0xbb, 0xc8, 0x30,
+-      0xea, 0x8a, 0x94, 0x6a, 0xfd, 0xdd, 0x4c, 0x94, 0x3e, 0xde, 0xce, 0x7e,
+-      0x7d, 0x78, 0x37, 0x51, 0xc6, 0x1c, 0x24, 0x18, 0xb3, 0xd8, 0xe0, 0x92,
+-      0xe6, 0x00, 0xc8, 0xf9, 0xa6, 0xfc, 0xb5, 0x81, 0xf1, 0x5f, 0x62, 0xb4,
+-      0x7a, 0xdb, 0xdc, 0x08, 0x36, 0x64, 0xe0, 0x5e, 0xd7, 0x1c, 0xc5, 0x7a,
+-      0xc6, 0xf6, 0x87, 0x18, 0x2f, 0x37, 0x32, 0x16, 0xee, 0x0a, 0x73, 0x6c,
+-      0x15, 0xb6, 0x5d, 0x68, 0x74, 0x49, 0x3e, 0x83, 0x5e, 0xc6, 0xe2, 0xb5,
+-      0x8c, 0x2f, 0x5b, 0x78, 0x7d, 0x2a, 0xf3, 0xcf, 0xf6, 0x43, 0xcc, 0xa7,
+-      0x5e, 0xba, 0xa2, 0x4d, 0xa8, 0xc3, 0x46, 0x7d, 0xdd, 0x56, 0xc6, 0x62,
+-      0xb6, 0x6b, 0x95, 0x45, 0x6d, 0xfb, 0x86, 0x50, 0x30, 0xe6, 0x51, 0x4c,
+-      0xbc, 0x38, 0x3a, 0x61, 0xeb, 0xd3, 0x25, 0x97, 0xca, 0xc7, 0x41, 0x19,
+-      0xab, 0xe4, 0x08, 0x82, 0x0f, 0x92, 0x27, 0x4c, 0xc5, 0x08, 0x15, 0x4b,
+-      0x06, 0x25, 0x4f, 0x08, 0x60, 0x65, 0xe2, 0xbb, 0x78, 0xb1, 0xc1, 0x8d,
+-      0x56, 0xe6, 0x58, 0xb7, 0x25, 0x7c, 0x58, 0x41, 0x2c, 0x5d, 0x9a, 0x60,
+-      0xee, 0xa4, 0xf9, 0xb1, 0x2c, 0xe1, 0xc6, 0xb1, 0x06, 0xe6, 0x40, 0xfe,
+-      0x42, 0x7c, 0x64, 0xba, 0x70, 0xdc, 0xd4, 0x90, 0x76, 0xfc, 0x61, 0x17,
+-      0x31, 0x90, 0x7a, 0x54, 0x25, 0x77, 0x10, 0x1d, 0xba, 0xa8, 0x4f, 0x15,
+-      0xf1, 0x4b, 0x3a, 0xfc, 0xb2, 0x5c, 0x40, 0xe4, 0x92, 0x7c, 0xe0, 0x37,
+-      0x76, 0x7c, 0xba, 0xd4, 0x87, 0xe5, 0x8b, 0xca, 0x38, 0x84, 0xdf, 0x12,
+-      0x27, 0x47, 0x4d, 0x72, 0xbb, 0xa9, 0x43, 0x3d, 0x4f, 0x6e, 0x5d, 0x8e,
+-      0xb7, 0x0c, 0xe1, 0xd6, 0x6f, 0x42, 0xa3, 0xef, 0xf6, 0x8c, 0x86, 0x3a,
+-      0xce, 0x2b, 0x2e, 0x9c, 0x32, 0xca, 0xc8, 0xfb, 0x38, 0x0f, 0xa3, 0x70,
+-      0x6f, 0x9d, 0x6b, 0x22, 0x39, 0xda, 0x1d, 0x29, 0xe5, 0x78, 0xdd, 0x73,
+-      0x73, 0x9c, 0xe8, 0xeb, 0xd4, 0xed, 0x9a, 0xb0, 0xc3, 0x89, 0x72, 0x7c,
+-      0x40, 0xb3, 0xed, 0x77, 0x0c, 0xd1, 0x33, 0x70, 0x78, 0x52, 0xc7, 0x07,
+-      0x79, 0xdd, 0x33, 0xa9, 0xe3, 0x2d, 0x6c, 0x8f, 0xfe, 0x87, 0x6d, 0x57,
+-      0xf0, 0x18, 0x1d, 0xcc, 0x29, 0xc9, 0x6f, 0x88, 0xc3, 0xc4, 0x95, 0x18,
+-      0x75, 0xfc, 0x72, 0x66, 0x83, 0xe0, 0x36, 0xa7, 0xbb, 0xd1, 0xc1, 0xef,
+-      0x98, 0x7a, 0x98, 0x76, 0x20, 0x7a, 0x78, 0x6b, 0x32, 0xb7, 0xb1, 0xed,
+-      0x01, 0x53, 0x74, 0x9c, 0xcf, 0xcb, 0x44, 0xd7, 0x37, 0x4a, 0x8e, 0xd5,
+-      0x03, 0x7c, 0xc1, 0xb2, 0x2e, 0xe2, 0xee, 0x42, 0xfc, 0xa0, 0x4d, 0x6c,
+-      0xa7, 0xd4, 0x89, 0x95, 0xf3, 0x6b, 0x6d, 0x3b, 0xdc, 0xa4, 0xe3, 0x82,
+-      0x51, 0x1f, 0x69, 0x54, 0x67, 0x51, 0xd6, 0x28, 0xf6, 0x91, 0x0f, 0x74,
+-      0xa7, 0x66, 0x22, 0xe6, 0x17, 0x5b, 0x43, 0x47, 0x41, 0x0e, 0xc3, 0x71,
+-      0x26, 0x61, 0xd4, 0x6d, 0xc3, 0x0c, 0x1c, 0xf0, 0xb7, 0x90, 0xc7, 0xa9,
+-      0x2d, 0x4c, 0xff, 0xc9, 0x9f, 0x0c, 0x6b, 0x07, 0xce, 0xda, 0x69, 0xbf,
+-      0xcd, 0x38, 0x49, 0x18, 0xa0, 0x2e, 0x5f, 0xd1, 0x5c, 0x78, 0xb5, 0xee,
+-      0x9a, 0x49, 0xbe, 0x29, 0x9c, 0xe5, 0x3d, 0xfb, 0x98, 0x5f, 0xfa, 0x62,
+-      0x9e, 0xa7, 0x2e, 0x73, 0x49, 0x1e, 0xe8, 0x36, 0xa4, 0x6d, 0xe6, 0x0b,
+-      0x63, 0x57, 0xcb, 0x30, 0x61, 0x4f, 0xf8, 0x45, 0x86, 0xa0, 0xa6, 0xab,
+-      0x7f, 0x6c, 0x1e, 0xaf, 0xc3, 0xcf, 0x35, 0x37, 0x7c, 0xe4, 0xc5, 0xaf,
+-      0xf9, 0x73, 0x6d, 0xf4, 0x9a, 0xe3, 0x33, 0x4a, 0x1d, 0xac, 0x3c, 0xa2,
+-      0x24, 0x89, 0x0f, 0xe3, 0x1e, 0x68, 0xe5, 0x51, 0xb7, 0xae, 0x11, 0x13,
+-      0x36, 0x13, 0x13, 0x2c, 0x62, 0x42, 0x5f, 0xe6, 0x88, 0x92, 0xca, 0x7c,
+-      0x46, 0x5d, 0x48, 0x1d, 0xb1, 0x9d, 0x2d, 0x94, 0xe5, 0x27, 0x36, 0xaa,
+-      0x44, 0x9e, 0x0b, 0xbc, 0xdf, 0x42, 0x1e, 0x92, 0x97, 0x53, 0x7c, 0x95,
+-      0x10, 0x54, 0x2c, 0xcf, 0x52, 0xb9, 0xdf, 0xaa, 0x5c, 0xcf, 0x70, 0x4b,
+-      0xb9, 0xee, 0xb1, 0xa3, 0x4b, 0xdd, 0x58, 0x80, 0xd9, 0xe1, 0x85, 0x8b,
+-      0x44, 0x17, 0x6a, 0x34, 0xa6, 0x7b, 0x61, 0x55, 0xb9, 0x88, 0xe5, 0xef,
+-      0x35, 0x34, 0x60, 0x11, 0x73, 0xce, 0xb3, 0x04, 0xa7, 0x6e, 0xc3, 0x85,
+-      0x71, 0xea, 0xe7, 0x69, 0x53, 0xd6, 0x1b, 0x6c, 0xdc, 0x16, 0xb6, 0xe2,
+-      0xf4, 0x78, 0xab, 0x94, 0xb6, 0x57, 0x6c, 0x08, 0x4f, 0x28, 0x43, 0x49,
+-      0xd4, 0x5d, 0x77, 0x16, 0x41, 0x73, 0x17, 0x79, 0x92, 0x5e, 0x31, 0x3b,
+-      0xe2, 0xa1, 0xe6, 0x5e, 0x4f, 0x84, 0x22, 0xc7, 0x95, 0x9c, 0x3f, 0xbd,
+-      0x4c, 0xdb, 0x78, 0x2b, 0x61, 0x74, 0x16, 0xba, 0x72, 0xbf, 0xdf, 0x70,
+-      0xf2, 0xd9, 0xbc, 0x3f, 0x05, 0x26, 0x71, 0xc7, 0xeb, 0x3d, 0x93, 0xc0,
+-      0x79, 0xb5, 0x59, 0xf2, 0x5a, 0x9c, 0xdf, 0x6c, 0x8e, 0x2b, 0x1e, 0xa3,
+-      0x8c, 0xfa, 0x10, 0x2c, 0x2e, 0x20, 0xa7, 0x14, 0xee, 0xe0, 0xf5, 0x9e,
+-      0x65, 0x19, 0x72, 0xc2, 0x89, 0xba, 0xf9, 0xf5, 0x11, 0x2f, 0x62, 0x56,
+-      0x21, 0xfd, 0xba, 0x34, 0xea, 0xf7, 0xde, 0x98, 0xb5, 0xaa, 0x7c, 0xf4,
+-      0x8b, 0x12, 0xe6, 0xbb, 0xb3, 0x93, 0x0b, 0xcb, 0x24, 0x57, 0xdc, 0x38,
+-      0xca, 0x91, 0x55, 0xf6, 0x57, 0xa9, 0x51, 0x59, 0xc3, 0xd0, 0xe0, 0xa9,
+-      0xdc, 0x78, 0x8b, 0x1a, 0x9d, 0x40, 0x7b, 0xb3, 0xb7, 0x25, 0x92, 0x85,
+-      0xb7, 0x22, 0xba, 0x09, 0xe1, 0xa4, 0xe4, 0xad, 0x82, 0xb1, 0xb1, 0xad,
+-      0x44, 0xbd, 0xaa, 0xf2, 0x79, 0xf9, 0xb9, 0x82, 0x5a, 0x16, 0x95, 0xfc,
+-      0x55, 0x6f, 0x79, 0xc3, 0xc1, 0x62, 0x8d, 0xf9, 0xc6, 0xaf, 0x02, 0xff,
+-      0x77, 0xf5, 0x5b, 0xdd, 0x32, 0x77, 0x1e, 0x43, 0xbe, 0x65, 0xdd, 0x00,
+-      0x6e, 0x95, 0x58, 0xda, 0x3d, 0xe2, 0x66, 0x7e, 0x26, 0xf3, 0x25, 0xf1,
+-      0xf8, 0xc8, 0xbd, 0x2f, 0xd1, 0xdf, 0x3c, 0xd4, 0xfd, 0x0e, 0xc3, 0x62,
+-      0x98, 0xb0, 0x6d, 0x23, 0x1c, 0x0c, 0x14, 0x28, 0x3a, 0xb6, 0x37, 0xfc,
+-      0x13, 0xed, 0x0b, 0xc4, 0x41, 0x90, 0x98, 0x97, 0x61, 0xcb, 0x48, 0xc1,
+-      0x94, 0x7a, 0x91, 0xfb, 0xf2, 0xf5, 0x7a, 0x0d, 0x2b, 0x2e, 0xf5, 0x86,
+-      0xc3, 0xc1, 0xf6, 0x6d, 0xac, 0xb7, 0x93, 0xf5, 0x62, 0x8c, 0xbd, 0xeb,
+-      0x47, 0x35, 0x27, 0x1f, 0xb4, 0x46, 0x8a, 0xa7, 0xf6, 0x77, 0xa9, 0xde,
+-      0x93, 0x86, 0x35, 0xee, 0xf4, 0xd7, 0x14, 0xec, 0x2c, 0x70, 0xb9, 0x91,
+-      0x64, 0xbd, 0x71, 0xd6, 0x7b, 0x77, 0x54, 0xd6, 0x33, 0x70, 0xcb, 0x48,
+-      0x22, 0x35, 0xe1, 0x32, 0x0c, 0xed, 0x1d, 0xc4, 0x88, 0xd9, 0xce, 0x5c,
+-      0xde, 0x72, 0x28, 0xd3, 0x85, 0xed, 0xc6, 0xd1, 0x70, 0x21, 0xeb, 0x1d,
+-      0x37, 0x8e, 0x06, 0x3c, 0xf4, 0x99, 0x75, 0x6c, 0xaf, 0x9b, 0x79, 0x91,
+-      0x4a, 0x8c, 0xdc, 0x32, 0x22, 0xdc, 0xc1, 0xc4, 0x6c, 0xe6, 0x67, 0x8e,
+-      0x6d, 0xca, 0xda, 0x09, 0x64, 0x4e, 0x65, 0x7c, 0xc1, 0xba, 0x11, 0x67,
+-      0x7c, 0xca, 0x35, 0x87, 0x25, 0x57, 0xae, 0xb0, 0xb0, 0xb9, 0x41, 0xe2,
+-      0xa7, 0x42, 0xec, 0x0e, 0xd6, 0x8d, 0x33, 0x9e, 0x6c, 0x1b, 0xfb, 0x33,
+-      0x8c, 0x6b, 0x95, 0xcc, 0x65, 0x6d, 0xfb, 0x15, 0x63, 0x61, 0x05, 0x43,
+-      0xbc, 0xd7, 0x4b, 0x99, 0xbd, 0xa1, 0x62, 0x89, 0xd3, 0x4e, 0x5b, 0x31,
+-      0x08, 0x3e, 0x29, 0x48, 0x1a, 0xd6, 0x06, 0x91, 0xff, 0x58, 0x38, 0x18,
+-      0x3f, 0xac, 0xd4, 0xb7, 0x6f, 0xc3, 0x3f, 0x11, 0x2f, 0x41, 0xac, 0x9b,
+-      0x89, 0x21, 0x93, 0xd6, 0xd2, 0x66, 0x31, 0x42, 0x4a, 0x8c, 0x77, 0x9f,
+-      0x58, 0xc4, 0x08, 0xe7, 0x46, 0xb0, 0xb3, 0x95, 0xe5, 0x23, 0xb9, 0x75,
+-      0x16, 0x5c, 0x18, 0x0d, 0x32, 0x0e, 0x8b, 0x2e, 0x80, 0xad, 0x99, 0x7c,
+-      0x2c, 0xb0, 0xed, 0x83, 0xa6, 0x6d, 0xbf, 0x64, 0xce, 0xc4, 0x61, 0x33,
+-      0x18, 0x17, 0x1f, 0x78, 0xdf, 0x5c, 0x78, 0x83, 0xe4, 0xc5, 0x80, 0xc8,
+-      0xa6, 0x30, 0x76, 0x29, 0x28, 0xe1, 0x27, 0x10, 0x72, 0xeb, 0x25, 0x8a,
+-      0x0d, 0x6f, 0x53, 0x6d, 0x67, 0x2d, 0xf5, 0x5e, 0x36, 0x5f, 0xc1, 0x27,
+-      0x37, 0x2a, 0x38, 0x7a, 0x63, 0x28, 0x30, 0xa4, 0x94, 0x32, 0x2e, 0x84,
+-      0xda, 0x5a, 0x14, 0xeb, 0x04, 0xeb, 0xc6, 0x1a, 0x5c, 0xc1, 0x00, 0x94,
+-      0x72, 0x62, 0xd6, 0x6c, 0x5d, 0x68, 0x8b, 0xbb, 0x37, 0x14, 0xd8, 0xc9,
+-      0x6f, 0xd7, 0xa8, 0x82, 0x51, 0x23, 0x18, 0x83, 0xd3, 0x3e, 0xfb, 0x66,
+-      0xca, 0x7c, 0x53, 0xc8, 0xb6, 0x4f, 0x86, 0xeb, 0xb5, 0x93, 0x78, 0x9f,
+-      0xb8, 0x2c, 0xfd, 0xe4, 0x65, 0x03, 0xf3, 0x70, 0x23, 0xd6, 0xa2, 0xdc,
+-      0x24, 0xb4, 0x84, 0x71, 0x52, 0x62, 0x79, 0x5e, 0xde, 0x7c, 0x4c, 0xb7,
+-      0xed, 0xf7, 0xcd, 0x5c, 0x5b, 0x5a, 0x73, 0x30, 0x0e, 0xcc, 0xc4, 0x98,
+-      0x11, 0x6c, 0x1d, 0xa7, 0x1e, 0x02, 0xf4, 0xf5, 0x19, 0x46, 0x15, 0x26,
+-      0x3c, 0x41, 0x6d, 0x42, 0x59, 0xf4, 0x99, 0x8a, 0x39, 0x1b, 0x9e, 0x52,
+-      0xea, 0x3b, 0x8a, 0x60, 0x90, 0x9f, 0x5e, 0x23, 0xf3, 0x11, 0xf0, 0x91,
+-      0x0b, 0xae, 0x83, 0xc3, 0x2f, 0x70, 0x7b, 0xc2, 0x1d, 0xbb, 0x80, 0x1a,
+-      0xfa, 0x9d, 0xd1, 0xfe, 0x90, 0x12, 0x64, 0xf2, 0xf2, 0x35, 0x26, 0x38,
+-      0x22, 0x6b, 0x15, 0xe2, 0xf7, 0xd8, 0xf6, 0xc3, 0x94, 0x75, 0x17, 0x65,
+-      0xdd, 0x18, 0xfe, 0xd8, 0xfe, 0x07, 0xa7, 0xcd, 0x5b, 0x31, 0x64, 0x5c,
+-      0xdd, 0xee, 0x47, 0x36, 0xa6, 0x4b, 0xbb, 0x1e, 0x2c, 0x99, 0xce, 0x5c,
+-      0xab, 0x59, 0xf0, 0xaa, 0xd2, 0x43, 0x7c, 0x62, 0x7b, 0x8c, 0x7f, 0xea,
+-      0xd5, 0x1c, 0xc2, 0x05, 0xc6, 0xe6, 0x40, 0x5c, 0x51, 0xab, 0x4b, 0xa0,
+-      0xc1, 0x6b, 0xd8, 0x78, 0x84, 0x7c, 0x27, 0x36, 0xbd, 0x1c, 0xdf, 0xe4,
+-      0x9c, 0x96, 0x86, 0xd4, 0x6b, 0x5d, 0x9c, 0x93, 0xc3, 0x61, 0xf9, 0xed,
+-      0xc1, 0xf8, 0x74, 0x17, 0xba, 0x38, 0xcb, 0x5a, 0x48, 0x9d, 0x21, 0xf7,
+-      0xbd, 0x8d, 0xf2, 0x9b, 0xf2, 0x5f, 0xa3, 0xe0, 0x61, 0x5a, 0xa4, 0x1a,
+-      0xea, 0x0e, 0xc8, 0xfd, 0x56, 0x53, 0x7e, 0x2b, 0xe4, 0x92, 0x6e, 0xce,
+-      0x8b, 0x0d, 0x97, 0x2c, 0x4d, 0x84, 0x78, 0x3f, 0x2c, 0xd7, 0xb1, 0x87,
+-      0x39, 0xee, 0xd8, 0x01, 0x45, 0x30, 0xee, 0x97, 0xf6, 0x2b, 0x8c, 0x81,
+-      0x1a, 0x9f, 0x7f, 0x93, 0x7d, 0x9f, 0x08, 0xbf, 0x64, 0xcf, 0xa8, 0x50,
+-      0x70, 0x32, 0xa2, 0x63, 0xe6, 0x8d, 0xd5, 0x98, 0xb8, 0x5b, 0xc6, 0xac,
+-      0xa0, 0xd4, 0x38, 0xe8, 0x91, 0x1c, 0xb9, 0xcc, 0xb8, 0x06, 0x4b, 0x56,
+-      0xe4, 0xee, 0x15, 0x85, 0x64, 0x8d, 0x53, 0x47, 0xd1, 0x8d, 0x95, 0xd0,
+-      0x27, 0xef, 0x2d, 0x0a, 0xb9, 0xdb, 0x4a, 0x15, 0x43, 0xbb, 0x5d, 0x91,
+-      0xe7, 0xbf, 0x23, 0x2f, 0xb7, 0xed, 0x47, 0x38, 0x5f, 0xb3, 0xc3, 0x3e,
+-      0x9c, 0x63, 0x3f, 0xdd, 0xd4, 0xdf, 0xf2, 0x4b, 0xf3, 0x95, 0xaf, 0xff,
+-      0xa9, 0xad, 0xdf, 0x23, 0x75, 0xa5, 0x8d, 0xda, 0xd6, 0x25, 0xca, 0x03,
+-      0x1e, 0xc9, 0x91, 0x36, 0x86, 0x1d, 0x9d, 0xb1, 0xec, 0x73, 0xce, 0x6f,
+-      0xad, 0xf9, 0xad, 0x4b, 0xeb, 0x75, 0xe7, 0x9d, 0x58, 0xba, 0x70, 0xbe,
+-      0x86, 0x09, 0xbb, 0xa2, 0xd1, 0xd2, 0x0a, 0x21, 0x31, 0xb5, 0xa6, 0xee,
+-      0x39, 0xb6, 0xfb, 0x73, 0x33, 0x17, 0x6f, 0x0f, 0x9a, 0xc1, 0x3e, 0x8b,
+-      0xfe, 0x13, 0x67, 0x8e, 0xdb, 0x22, 0xbc, 0x63, 0xec, 0x16, 0xce, 0xc3,
+-      0x4c, 0x14, 0x36, 0x06, 0x7b, 0x66, 0x31, 0xe7, 0x73, 0x35, 0x4b, 0x9c,
+-      0x96, 0xf9, 0x71, 0xca, 0xb0, 0xaf, 0x22, 0x2c, 0xa2, 0x8c, 0xe1, 0xc6,
+-      0x3f, 0x15, 0xdf, 0xa4, 0x1d, 0xb1, 0xce, 0x60, 0x4f, 0x0c, 0x7f, 0xaa,
+-      0x2c, 0xc8, 0x28, 0x64, 0x2d, 0xcc, 0x7b, 0x4b, 0x3c, 0xa3, 0x92, 0x23,
+-      0x15, 0x68, 0xdd, 0xcd, 0x55, 0xfc, 0xc8, 0x73, 0xf7, 0x2d, 0x6b, 0x32,
+-      0x97, 0xd6, 0x20, 0xd1, 0x67, 0x16, 0x40, 0xbd, 0x49, 0xe2, 0x05, 0x7d,
+-      0x59, 0x93, 0xf1, 0x59, 0xb4, 0x72, 0x59, 0x5f, 0x30, 0x56, 0xad, 0x25,
+-      0x5e, 0xbc, 0xc8, 0x1e, 0x87, 0xc9, 0xc5, 0x2c, 0xc7, 0x33, 0x9c, 0xf8,
+-      0x37, 0x65, 0x4d, 0x52, 0xe2, 0x57, 0x7e, 0x5d, 0xb3, 0x12, 0xfd, 0x7b,
+-      0x57, 0x40, 0xaf, 0xca, 0x61, 0xa0, 0x1a, 0x6d, 0xc2, 0xc2, 0xbe, 0x40,
+-      0x41, 0x2e, 0x7f, 0x28, 0x43, 0xef, 0xde, 0x30, 0xd2, 0xd3, 0x9d, 0xfa,
+-      0xbc, 0xe7, 0x85, 0x60, 0xf4, 0xf6, 0xbd, 0xd7, 0xca, 0x7a, 0x40, 0x40,
+-      0xda, 0x8d, 0xd3, 0x77, 0x54, 0xe3, 0x43, 0xdb, 0xd2, 0xa4, 0xfd, 0xa3,
+-      0x37, 0x10, 0x47, 0xcc, 0xc5, 0xa8, 0x6f, 0x3f, 0x84, 0x33, 0xe4, 0xa4,
+-      0x4e, 0xbe, 0xa4, 0x17, 0x46, 0xc7, 0x1f, 0xf6, 0x20, 0x14, 0x1f, 0x21,
+-      0x0e, 0xf8, 0x46, 0xbd, 0xe4, 0x56, 0x33, 0x9d, 0x75, 0xaf, 0x85, 0xc4,
+-      0x96, 0x38, 0x79, 0xf9, 0xd7, 0xdc, 0x6e, 0xac, 0x25, 0x66, 0x1c, 0x34,
+-      0xea, 0x3b, 0x0e, 0xe1, 0x1f, 0x89, 0xb3, 0x52, 0x5e, 0x65, 0x7f, 0xd2,
+-      0xa6, 0x9b, 0xfd, 0xc1, 0x4b, 0x2e, 0x70, 0x2f, 0xf9, 0xac, 0xdb, 0x63,
+-      0xfc, 0xc4, 0x23, 0xbc, 0x43, 0x78, 0xf7, 0xae, 0xbd, 0x0a, 0x5a, 0xd8,
+-      0xce, 0x4e, 0xda, 0xcc, 0xc3, 0x21, 0xb8, 0x5b, 0x6f, 0x24, 0xbf, 0x02,
+-      0x5d, 0x70, 0xba, 0x0f, 0x3b, 0x46, 0x10, 0xc9, 0x18, 0xe3, 0x33, 0x7c,
+-      0xa8, 0x62, 0x3b, 0x12, 0x53, 0x0a, 0x26, 0xdb, 0x89, 0xdc, 0x77, 0x65,
+-      0x3b, 0x65, 0x78, 0x72, 0xb2, 0x9d, 0x7d, 0x6c, 0xe7, 0xe6, 0xd9, 0x70,
+-      0x97, 0xdd, 0x2c, 0x73, 0xd5, 0x40, 0xff, 0x29, 0x43, 0xca, 0x89, 0x2b,
+-      0xe4, 0xa3, 0x5f, 0x85, 0x62, 0xd4, 0x4a, 0xee, 0x72, 0xd6, 0xa9, 0xb7,
+-      0xb8, 0x61, 0xfc, 0x02, 0x69, 0x91, 0x72, 0x7e, 0xf6, 0x38, 0x1d, 0x35,
+-      0xaf, 0x9b, 0x2a, 0x6c, 0xdd, 0x5b, 0x9c, 0x97, 0x97, 0xfd, 0xe4, 0xfb,
+-      0xa8, 0xe4, 0x3d, 0x3f, 0x76, 0x30, 0x07, 0x5d, 0xcc, 0x7e, 0x0e, 0x9b,
+-      0xc2, 0x23, 0xeb, 0xcd, 0x22, 0x45, 0x72, 0xf2, 0x00, 0x39, 0x45, 0x25,
+-      0x36, 0x3b, 0x71, 0x28, 0xc0, 0xfa, 0x0d, 0x65, 0x39, 0x7e, 0x02, 0xcf,
+-      0x32, 0x96, 0x6d, 0x09, 0xe7, 0xfa, 0x23, 0x0e, 0x33, 0xcf, 0x6d, 0xc4,
+-      0xc1, 0xc1, 0x4b, 0xcf, 0x83, 0x8b, 0x8d, 0xa9, 0xf3, 0x35, 0x1e, 0xf4,
+-      0xa0, 0x8d, 0xdf, 0x05, 0x12, 0x67, 0xae, 0x18, 0xfb, 0x96, 0x91, 0x47,
+-      0xf8, 0x5d, 0x8c, 0xad, 0x23, 0x36, 0xb6, 0x38, 0x39, 0x4e, 0x01, 0xba,
+-      0x1b, 0x04, 0x0f, 0xc5, 0x96, 0xa6, 0x4b, 0xec, 0x88, 0xa4, 0x21, 0xf1,
+-      0x55, 0xec, 0x27, 0xea, 0xd8, 0x8f, 0x4b, 0x99, 0x6a, 0x3f, 0x5d, 0x78,
+-      0xcd, 0x38, 0xba, 0xa2, 0x10, 0x47, 0xef, 0x97, 0xb5, 0xfb, 0x8e, 0x30,
+-      0x8e, 0xdd, 0x46, 0xdf, 0x7c, 0x97, 0xd8, 0xb2, 0x65, 0x36, 0xe3, 0x97,
+-      0x83, 0x59, 0x0a, 0x0a, 0xc9, 0x2b, 0xb6, 0xed, 0x0d, 0xea, 0x05, 0xaa,
+-      0xc6, 0x3e, 0xaf, 0xc6, 0x2e, 0x91, 0xdf, 0x64, 0x9e, 0x7e, 0xf4, 0xb1,
+-      0x42, 0xf8, 0x24, 0x5f, 0x7a, 0xfb, 0x0c, 0xdb, 0x58, 0x6c, 0xe6, 0x75,
+-      0xe5, 0xe8, 0x69, 0xb2, 0x9d, 0x4a, 0x24, 0xf7, 0xe6, 0xeb, 0x2b, 0x38,
+-      0x15, 0x0a, 0x4c, 0xae, 0x9d, 0x57, 0xa2, 0x77, 0xe4, 0xe8, 0x49, 0xf2,
+-      0x1c, 0xc6, 0xa9, 0xa3, 0x9d, 0x01, 0xca, 0x72, 0x3e, 0x9c, 0x9f, 0x53,
+-      0xf1, 0xcd, 0xa9, 0x6d, 0x88, 0xed, 0x42, 0x29, 0xab, 0xc5, 0x96, 0x32,
+-      0xda, 0x68, 0x26, 0x84, 0x78, 0x49, 0xb4, 0x0c, 0x89, 0x11, 0xfa, 0xd6,
+-      0x68, 0x01, 0xdc, 0xf3, 0x24, 0xee, 0x0a, 0xd7, 0x72, 0xdf, 0x72, 0x3a,
+-      0x51, 0x80, 0x07, 0xcc, 0x8b, 0xb6, 0xe0, 0xe2, 0x49, 0x03, 0xd7, 0x15,
+-      0x10, 0x13, 0x6b, 0xc3, 0xa1, 0xd8, 0x3a, 0xe6, 0xb4, 0xc7, 0x1b, 0xdc,
+-      0xb7, 0x7c, 0x90, 0xf9, 0x3d, 0x79, 0xf1, 0xd5, 0xe3, 0x11, 0x7d, 0xe0,
+-      0xc4, 0xd2, 0x90, 0xf4, 0x29, 0xfd, 0xe5, 0x6d, 0x54, 0xfa, 0xb7, 0xed,
+-      0x50, 0xd8, 0xe7, 0xcc, 0x79, 0x7e, 0x0c, 0xef, 0x19, 0xf9, 0x31, 0xf8,
+-      0x9c, 0xf8, 0xcd, 0x1c, 0x98, 0x98, 0x23, 0x79, 0xc1, 0x11, 0xe5, 0xa8,
+-      0x93, 0x03, 0x5b, 0x31, 0xe6, 0xbe, 0x91, 0x9e, 0xc9, 0xdc, 0x77, 0x9c,
+-      0x3c, 0xf7, 0x38, 0x79, 0xee, 0xcb, 0x93, 0xb9, 0xef, 0x8b, 0x19, 0xa9,
+-      0x33, 0xb5, 0x7c, 0x24, 0x26, 0x6b, 0xd6, 0x23, 0x89, 0x50, 0x5d, 0xbe,
+-      0xce, 0xcb, 0x2c, 0x7f, 0xfc, 0x52, 0xf9, 0xd5, 0xcc, 0x57, 0x57, 0x61,
+-      0x5b, 0xaa, 0x04, 0x0f, 0x6a, 0x4e, 0x6e, 0xe9, 0x2d, 0x8c, 0x9e, 0xb8,
+-      0xef, 0x7d, 0x63, 0xbc, 0xce, 0x45, 0x1c, 0x1a, 0xe1, 0xe0, 0x5b, 0x12,
+-      0x0a, 0xfd, 0xce, 0x83, 0x1e, 0xad, 0x1c, 0x6b, 0xcd, 0x7f, 0xb2, 0x1f,
+-      0x5c, 0x25, 0xcf, 0xf2, 0x7b, 0x14, 0x52, 0xfe, 0x35, 0x96, 0x0f, 0x9a,
+-      0x23, 0x93, 0xb9, 0xe0, 0xd1, 0x04, 0xfa, 0x24, 0xcf, 0x5a, 0xd3, 0x1c,
+-      0xd2, 0xbb, 0x9d, 0x75, 0x63, 0x1d, 0xeb, 0x32, 0x3a, 0xd6, 0x53, 0x9e,
+-      0xb4, 0x7b, 0x32, 0x47, 0xca, 0xc5, 0x62, 0x4b, 0x78, 0xe6, 0x22, 0x96,
+-      0xdb, 0x3c, 0x89, 0x33, 0x2d, 0x97, 0x78, 0xae, 0x6d, 0xf7, 0x9b, 0x79,
+-      0xae, 0xcb, 0x58, 0x50, 0x29, 0xb9, 0x35, 0x68, 0x17, 0x15, 0x48, 0xfb,
+-      0x65, 0x4f, 0x66, 0xea, 0x18, 0x11, 0x2b, 0x8c, 0x86, 0xf4, 0xd9, 0xea,
+-      0x54, 0xec, 0x92, 0xb1, 0x0a, 0x6e, 0x59, 0x8e, 0x7e, 0x8e, 0x5d, 0x1a,
+-      0x6f, 0x7d, 0xa1, 0x60, 0xd6, 0xc1, 0x44, 0x77, 0x01, 0x6d, 0x4b, 0x2d,
+-      0x10, 0x7b, 0x40, 0xee, 0x1e, 0xb2, 0xb6, 0xbd, 0xfd, 0x0a, 0xdd, 0x15,
+-      0xc4, 0x98, 0x0a, 0xe0, 0xe9, 0x44, 0x28, 0x76, 0x16, 0x96, 0x72, 0x32,
+-      0xe3, 0xa6, 0xad, 0x4b, 0xbb, 0x5b, 0xd8, 0x5e, 0x8f, 0x72, 0xe2, 0x52,
+-      0x9b, 0x17, 0x2e, 0x6e, 0x76, 0xd6, 0x71, 0xf3, 0xbe, 0xe2, 0xc5, 0x43,
+-      0x7d, 0xf9, 0xbd, 0xc6, 0x18, 0xde, 0x33, 0x05, 0x17, 0xbd, 0xe4, 0x3d,
+-      0xcc, 0xd2, 0x13, 0xdb, 0x90, 0xf3, 0x4b, 0xf9, 0xe4, 0xe7, 0xfd, 0xa0,
+-      0x5b, 0x30, 0xec, 0x27, 0xb3, 0x63, 0x93, 0x6b, 0x2e, 0x7f, 0xac, 0x4c,
+-      0x1e, 0xdb, 0x2f, 0x5c, 0xec, 0x4b, 0x55, 0x4f, 0xc9, 0xb3, 0x69, 0x5f,
+-      0x03, 0xc1, 0x1e, 0x0b, 0x95, 0x6c, 0xc3, 0x8d, 0xbf, 0x65, 0xfc, 0x76,
+-      0x0f, 0x1c, 0xbd, 0x41, 0x52, 0x32, 0xcf, 0xa1, 0x18, 0x36, 0x37, 0x7b,
+-      0xe0, 0x1a, 0xaa, 0x2e, 0xcc, 0xad, 0xf3, 0x91, 0x3c, 0x3b, 0xdf, 0x8a,
+-      0x83, 0xd3, 0x6a, 0x56, 0xf2, 0x6a, 0xd2, 0x88, 0x43, 0xa2, 0xd7, 0x4a,
+-      0x7e, 0x8b, 0x5e, 0xfc, 0xfc, 0x16, 0x1d, 0x55, 0xf1, 0xbb, 0x1c, 0xb1,
+-      0x2a, 0xd9, 0xf3, 0x6a, 0x47, 0x82, 0x98, 0x55, 0x12, 0xed, 0xc4, 0xd7,
+-      0x7b, 0x6d, 0xbb, 0x87, 0x7e, 0x59, 0xc4, 0x18, 0xff, 0x48, 0xa8, 0x3e,
+-      0x32, 0x47, 0x29, 0x20, 0xdf, 0x69, 0x47, 0xcf, 0x48, 0x41, 0xbc, 0x3c,
+-      0x5a, 0xc5, 0x98, 0xae, 0xe1, 0x93, 0xb9, 0x6d, 0xc8, 0x8e, 0x5e, 0xbd,
+-      0x57, 0x36, 0x75, 0x9f, 0x2c, 0xbf, 0x3f, 0x26, 0xe3, 0x11, 0xb9, 0x45,
+-      0xfe, 0x0b, 0x17, 0xb7, 0xa6, 0x44, 0x36, 0x0f, 0x0e, 0xf4, 0x89, 0xbc,
+-      0x36, 0x3a, 0xcc, 0x5b, 0x29, 0x27, 0x91, 0xbe, 0x72, 0xea, 0xfc, 0xe6,
+-      0xdb, 0x91, 0x75, 0xf0, 0x4e, 0x65, 0x98, 0xf3, 0x65, 0xb9, 0x0b, 0xc5,
+-      0xbf, 0x34, 0xe6, 0x15, 0xca, 0x73, 0x19, 0x69, 0xa3, 0x45, 0x19, 0x49,
+-      0x4f, 0xad, 0xd3, 0xa9, 0x1c, 0xca, 0x3c, 0x5c, 0x28, 0x9c, 0xe3, 0xb2,
+-      0x1e, 0xf3, 0x32, 0x90, 0xdc, 0xd2, 0x5e, 0x2a, 0x92, 0xa2, 0x7f, 0xd1,
+-      0x8f, 0x0e, 0x77, 0x96, 0xbf, 0xb3, 0x5f, 0xd6, 0xe7, 0xd5, 0x3e, 0x36,
+-      0xf7, 0x0a, 0x9f, 0x3c, 0x4e, 0x9f, 0x1c, 0xff, 0xa3, 0x3e, 0x39, 0xef,
+-      0x4f, 0x94, 0xcf, 0xaf, 0xb7, 0xda, 0xf6, 0x6e, 0x53, 0xd6, 0xe8, 0x65,
+-      0xdd, 0xb5, 0xe1, 0x4b, 0xf6, 0x5e, 0x65, 0x3d, 0x7e, 0x36, 0xd2, 0x95,
+-      0xc1, 0xb4, 0xac, 0xbf, 0x0c, 0xa4, 0x80, 0x45, 0x49, 0xe9, 0x27, 0x46,
+-      0x7d, 0xa9, 0xb7, 0x32, 0x1a, 0x31, 0x43, 0xe8, 0xc2, 0x19, 0xd3, 0xd8,
+-      0xf7, 0x20, 0x79, 0x77, 0x37, 0x73, 0xd2, 0x83, 0xe6, 0x72, 0xfa, 0x7b,
+-      0x31, 0x36, 0x34, 0xd0, 0x18, 0x57, 0x98, 0xf4, 0x7b, 0xab, 0x9d, 0xae,
+-      0xe8, 0xf5, 0x45, 0xdb, 0x57, 0x25, 0x42, 0xc1, 0xb6, 0x8d, 0xc4, 0xf3,
+-      0xa5, 0xbd, 0x5e, 0xe8, 0x8a, 0xc3, 0x07, 0x5a, 0x7f, 0xa1, 0x0a, 0x46,
+-      0x9d, 0x29, 0xc8, 0xe5, 0xcd, 0xb2, 0xe6, 0x22, 0xfd, 0x2c, 0x67, 0x5e,
+-      0x22, 0x75, 0x75, 0xb4, 0xd7, 0x2a, 0x48, 0xd5, 0x06, 0xfb, 0xe0, 0xb2,
+-      0xed, 0xdf, 0x91, 0x17, 0x8e, 0x3b, 0xb9, 0x7c, 0x7d, 0xdd, 0x6e, 0xf5,
+-      0x7f, 0x10, 0x0b, 0x9d, 0x36, 0x34, 0x59, 0xf3, 0x7f, 0xe1, 0x4f, 0xae,
+-      0x7b, 0x9b, 0x90, 0xbd, 0x89, 0x42, 0x63, 0x89, 0x32, 0xe2, 0xcf, 0x71,
+-      0x8a, 0xdb, 0x06, 0x3e, 0xbf, 0xf8, 0x64, 0x4a, 0xec, 0x1c, 0x55, 0x01,
+-      0x63, 0x06, 0x66, 0x1f, 0x28, 0xc5, 0xb2, 0x01, 0xe1, 0x0a, 0x3e, 0xab,
+-      0x30, 0x1a, 0xc0, 0x9c, 0x03, 0x95, 0x68, 0xd9, 0x23, 0xfb, 0x50, 0x76,
+-      0x57, 0x45, 0x74, 0x35, 0xdc, 0x87, 0x34, 0x3c, 0xb0, 0xc7, 0xb6, 0x67,
+-      0xcd, 0x23, 0xb5, 0x63, 0x4c, 0x7c, 0xb7, 0x69, 0x15, 0x3c, 0xd9, 0x6a,
+-      0x2c, 0x49, 0xd6, 0x39, 0x6b, 0xad, 0x1f, 0x26, 0x5a, 0x5b, 0xce, 0xf5,
+-      0xd6, 0x6e, 0xa8, 0x55, 0x82, 0xe6, 0x29, 0x25, 0x82, 0x82, 0x6c, 0x04,
+-      0xae, 0xa4, 0x82, 0x57, 0x0d, 0x74, 0x95, 0x45, 0xa3, 0x70, 0x65, 0xa3,
+-      0xf0, 0x25, 0xdd, 0x68, 0xa0, 0xbe, 0x4b, 0x38, 0xf7, 0xd3, 0x92, 0xd5,
+-      0x98, 0x96, 0xbd, 0x0e, 0xfa, 0x81, 0x06, 0xfa, 0x48, 0x25, 0xfb, 0xf3,
+-      0xa3, 0x25, 0xd9, 0x86, 0x69, 0x46, 0x33, 0x6d, 0xa3, 0x19, 0x33, 0x93,
+-      0x7e, 0x2c, 0xe0, 0x7c, 0x2c, 0x4e, 0xb6, 0xb2, 0x1f, 0x1f, 0xda, 0x07,
+-      0xee, 0x44, 0x60, 0xc8, 0x8b, 0xf2, 0x01, 0x1d, 0x1f, 0xce, 0xf5, 0xa2,
+-      0x68, 0x28, 0x80, 0xd2, 0xa4, 0xec, 0x8d, 0x21, 0xb6, 0xb1, 0x39, 0x00,
+-      0x5f, 0x16, 0x28, 0x19, 0xb0, 0xf1, 0xad, 0xf0, 0xa8, 0x7a, 0x77, 0xa5,
+-      0x65, 0x4f, 0x73, 0x62, 0x41, 0x6b, 0xfb, 0x16, 0xe3, 0xce, 0x49, 0xbf,
+-      0x77, 0x33, 0xcf, 0x52, 0xc8, 0xd7, 0x25, 0x06, 0xb6, 0xb6, 0x1f, 0x4c,
+-      0xc8, 0xda, 0x46, 0x88, 0x7e, 0xeb, 0x81, 0x77, 0xa8, 0x53, 0xe9, 0xa3,
+-      0xed, 0xa0, 0x40, 0xf4, 0xaf, 0xd2, 0xbf, 0xa0, 0x95, 0xd2, 0xce, 0xb7,
+-      0x66, 0x5a, 0x94, 0x64, 0xba, 0x53, 0xe9, 0xcd, 0x94, 0x78, 0x51, 0x2c,
+-      0xf3, 0xf2, 0x15, 0x8c, 0x36, 0x3c, 0x69, 0xa7, 0x2b, 0x9c, 0xb9, 0xb5,
+-      0x3c, 0x90, 0x9c, 0xdb, 0x5a, 0x15, 0xae, 0x0d, 0x76, 0x56, 0xa8, 0xb2,
+-      0x9f, 0x42, 0x1c, 0x52, 0x72, 0x7d, 0x69, 0x46, 0x12, 0xcf, 0xfa, 0x65,
+-      0x7d, 0x55, 0xe6, 0xbf, 0xb5, 0x3d, 0xd1, 0x7b, 0xe1, 0xa2, 0xcc, 0xe9,
+-      0xc7, 0xb4, 0xc3, 0xdb, 0x93, 0x9f, 0x5f, 0xdc, 0x97, 0x6a, 0x63, 0x9e,
+-      0x66, 0xe2, 0x55, 0xfe, 0x5e, 0xc4, 0x71, 0xbf, 0x98, 0xf1, 0x61, 0x61,
+-      0xb2, 0xd9, 0xd9, 0x8b, 0x5b, 0x96, 0x8c, 0xe0, 0x15, 0x7e, 0xb7, 0x24,
+-      0x57, 0xe1, 0x18, 0xf3, 0xd4, 0x07, 0x92, 0x51, 0xbc, 0x9d, 0x09, 0xe0,
+-      0x7e, 0xea, 0x6f, 0x06, 0xed, 0xf4, 0xae, 0xa4, 0x8e, 0x37, 0x32, 0xc0,
+-      0xcf, 0xfa, 0x6c, 0x84, 0x1a, 0xbf, 0xa3, 0x3e, 0xed, 0xac, 0x8d, 0x35,
+-      0xe3, 0x67, 0x09, 0x13, 0x6f, 0x24, 0x6a, 0xcc, 0x9b, 0xd5, 0xdf, 0x62,
+-      0xdc, 0x9d, 0xa0, 0x4d, 0x9d, 0x47, 0xbc, 0x52, 0xd6, 0xf1, 0x72, 0xf2,
+-      0x77, 0x8f, 0x79, 0x98, 0x63, 0x6d, 0xc0, 0x11, 0xbf, 0xb3, 0x2e, 0x71,
+-      0x85, 0x5c, 0xb2, 0x36, 0xb1, 0x88, 0x72, 0x3d, 0x95, 0x22, 0x57, 0x34,
+-      0xaa, 0x29, 0x8f, 0x17, 0x0b, 0x07, 0xbc, 0xa8, 0xa4, 0x6d, 0x9c, 0x3e,
+-      0x10, 0xc5, 0xce, 0x54, 0x11, 0x5a, 0xfa, 0x03, 0x38, 0xc3, 0xeb, 0xad,
+-      0xb4, 0xf1, 0x1f, 0xb1, 0x6f, 0xa3, 0x49, 0xc3, 0x80, 0x56, 0x84, 0x9e,
+-      0xba, 0x1f, 0x93, 0xef, 0xa9, 0xcc, 0x39, 0x98, 0x1b, 0x18, 0x25, 0xd8,
+-      0xc1, 0xb4, 0xbe, 0xb0, 0x39, 0x88, 0xfe, 0x3a, 0xda, 0x7a, 0x15, 0xe3,
+-      0x87, 0x11, 0x43, 0x39, 0x31, 0x26, 0xc5, 0x5c, 0xb1, 0x30, 0x6a, 0x51,
+-      0x06, 0x15, 0xfb, 0x34, 0x55, 0xd6, 0xe4, 0xf8, 0x2c, 0x80, 0x63, 0x09,
+-      0xd8, 0xc5, 0x51, 0xe3, 0xc2, 0x4e, 0x84, 0x4e, 0xbc, 0xcf, 0xb8, 0xfe,
+-      0xf7, 0x99, 0x12, 0x7c, 0xbf, 0x6f, 0x36, 0xfe, 0x36, 0x2d, 0xeb, 0xbd,
+-      0x3e, 0xac, 0x1f, 0x0c, 0xab, 0xb9, 0xb5, 0x4a, 0x1f, 0x1e, 0x1a, 0x84,
+-      0x35, 0x93, 0xf6, 0xf8, 0xf2, 0x70, 0x19, 0xd6, 0xf4, 0xbd, 0x60, 0x33,
+-      0x77, 0xa6, 0x5d, 0x7b, 0x71, 0x34, 0x2d, 0x32, 0x96, 0x53, 0xc6, 0x22,
+-      0x1c, 0xe3, 0x75, 0x0f, 0x6d, 0xbf, 0xb2, 0xf7, 0xdb, 0xf8, 0x2c, 0x55,
+-      0x53, 0x77, 0xbf, 0xda, 0x8e, 0xe3, 0xce, 0x7e, 0x6c, 0x03, 0xde, 0xa2,
+-      0x1e, 0xcb, 0x77, 0xdb, 0xf6, 0x6f, 0xc2, 0x31, 0xfc, 0x2c, 0x73, 0x2d,
+-      0x8a, 0x78, 0x6d, 0x86, 0x5b, 0xf0, 0x66, 0xa6, 0x1a, 0x65, 0xbd, 0xad,
+-      0x78, 0x9d, 0x9c, 0xbf, 0x74, 0x77, 0x27, 0x4e, 0xb1, 0x7d, 0x5f, 0xbf,
+-      0x17, 0xaf, 0xa5, 0xbd, 0x78, 0xb5, 0xcf, 0xd0, 0xd6, 0x2a, 0x7f, 0xa7,
+-      0xc4, 0x2b, 0x73, 0xfd, 0x0c, 0xa4, 0x72, 0xfa, 0xdc, 0x3e, 0x56, 0x00,
+-      0xc1, 0xf2, 0x43, 0x7e, 0x59, 0xbf, 0x95, 0xf3, 0x31, 0xad, 0xed, 0x5a,
+-      0xf2, 0x77, 0x17, 0x13, 0xd4, 0xe7, 0x9b, 0xa3, 0x01, 0xdc, 0x91, 0x14,
+-      0xdd, 0x7e, 0x7e, 0x71, 0x17, 0xb1, 0xa3, 0x77, 0x34, 0x82, 0x13, 0x09,
+-      0x8f, 0xb3, 0xe7, 0xd8, 0x33, 0x2a, 0xfb, 0xb1, 0xdf, 0xe5, 0xdc, 0x00,
+-      0x6b, 0x47, 0x73, 0x6d, 0x6d, 0x19, 0x2b, 0xa4, 0xee, 0x6e, 0xc7, 0xd3,
+-      0x5a, 0x81, 0xc4, 0xdf, 0x9c, 0x8d, 0x1a, 0x41, 0xda, 0xee, 0x77, 0x9d,
+-      0xf5, 0xbd, 0x81, 0x54, 0xbd, 0x36, 0x0d, 0xf9, 0x79, 0xac, 0xc1, 0x4c,
+-      0xe3, 0xf7, 0xf6, 0x0b, 0x7e, 0x59, 0x77, 0x15, 0xbe, 0xd8, 0xda, 0xbe,
+-      0x36, 0x21, 0xfd, 0xe8, 0xd8, 0x3c, 0x7a, 0xe1, 0x62, 0x3f, 0xf9, 0xfa,
+-      0x12, 0xda, 0xc8, 0xba, 0x90, 0x1f, 0x8b, 0x6b, 0xeb, 0x50, 0x9b, 0x95,
+-      0x35, 0xdd, 0x08, 0x39, 0xab, 0x89, 0x8e, 0x50, 0xd4, 0xd9, 0xd7, 0x82,
+-      0x9a, 0xbf, 0xe7, 0xc5, 0xbb, 0x7f, 0xe0, 0x2b, 0xc0, 0xac, 0x81, 0x36,
+-      0xf6, 0x6b, 0x63, 0x99, 0xf9, 0x0f, 0x76, 0xcb, 0x3d, 0xd2, 0x7f, 0x4d,
+-      0x59, 0xee, 0x19, 0x27, 0xbc, 0x58, 0x7e, 0x37, 0xd1, 0x97, 0x1a, 0x71,
+-      0xd8, 0x2f, 0x3c, 0x43, 0xfc, 0xa0, 0xb5, 0x3d, 0x4c, 0xfb, 0xd9, 0x41,
+-      0x19, 0x56, 0xd0, 0x76, 0x96, 0x11, 0x17, 0xca, 0x8d, 0x0b, 0x17, 0x7b,
+-      0x53, 0x26, 0xe6, 0x8c, 0xfa, 0x68, 0xcb, 0x45, 0xec, 0xaf, 0x19, 0xc6,
+-      0x28, 0x71, 0x84, 0xf6, 0xbd, 0x60, 0xd4, 0x4f, 0x7b, 0xd6, 0x31, 0x7f,
+-      0x54, 0x7c, 0xdc, 0x40, 0x88, 0xb1, 0xac, 0x9d, 0x75, 0x22, 0xa3, 0x15,
+-      0xb8, 0x79, 0xbf, 0x1b, 0x77, 0x26, 0xc3, 0xd4, 0x4f, 0x1d, 0x63, 0xdc,
+-      0x65, 0x7d, 0x6f, 0x1b, 0x9b, 0x85, 0x0a, 0xe3, 0x88, 0xfd, 0x9c, 0x83,
+-      0x61, 0x85, 0x8e, 0x9e, 0x02, 0xec, 0x37, 0x90, 0x82, 0x55, 0xce, 0xf8,
+-      0x72, 0x61, 0xf4, 0xb9, 0x2f, 0xe2, 0xf7, 0x8a, 0x2e, 0xa7, 0x8e, 0x47,
+-      0x30, 0xe5, 0x02, 0xb1, 0x0e, 0x68, 0x7c, 0xc2, 0xc6, 0xe2, 0xc6, 0x8d,
+-      0xca, 0x0f, 0x1c, 0x5b, 0x92, 0x76, 0x85, 0x3b, 0xe4, 0xf5, 0x9f, 0xd7,
+-      0xf9, 0x6f, 0x0a, 0x72, 0x3a, 0xcf, 0x8f, 0x33, 0xb8, 0x4f, 0x70, 0x7a,
+-      0x7d, 0x63, 0x1e, 0xa7, 0xa5, 0xbc, 0xdc, 0x5f, 0x61, 0xf7, 0x6a, 0x70,
+-      0x17, 0x1a, 0x2e, 0x6c, 0xaf, 0x7b, 0x46, 0x99, 0xd0, 0xc4, 0xe7, 0x15,
+-      0x62, 0xc7, 0xed, 0x36, 0xdd, 0x96, 0x76, 0xfd, 0x12, 0xcb, 0x41, 0x29,
+-      0xbc, 0x34, 0x97, 0xc2, 0x3f, 0xba, 0x27, 0xe7, 0x52, 0x78, 0x6f, 0x7e,
+-      0x4c, 0x79, 0x59, 0x23, 0xe4, 0x76, 0x22, 0xaf, 0xd8, 0x86, 0x94, 0x79,
+-      0xb0, 0xc8, 0x59, 0x8f, 0x46, 0xf7, 0x14, 0x7b, 0xc8, 0x73, 0x18, 0xa7,
+-      0x0d, 0x0d, 0x97, 0xec, 0xc1, 0x8d, 0xb6, 0xa4, 0xcc, 0x3b, 0xac, 0x62,
+-      0xea, 0xa1, 0x6d, 0xd4, 0xc3, 0xf9, 0x13, 0x2e, 0xae, 0x62, 0x89, 0xb9,
+-      0x5d, 0x19, 0xf7, 0xef, 0x64, 0x1b, 0x9f, 0x5f, 0x64, 0x1d, 0xde, 0xeb,
+-      0xe5, 0xf5, 0x75, 0xb8, 0x9d, 0x38, 0xba, 0x36, 0x6c, 0x29, 0xb9, 0x73,
+-      0x05, 0x45, 0xb8, 0x71, 0xa0, 0x12, 0x3e, 0x43, 0xd6, 0x2d, 0xfe, 0xb3,
+-      0xe2, 0xab, 0x90, 0xf1, 0x3b, 0x9c, 0x81, 0x76, 0x72, 0x1d, 0x16, 0x0f,
+-      0x30, 0x64, 0x3b, 0x7b, 0x04, 0x0b, 0xf1, 0x74, 0xf3, 0x75, 0x58, 0xea,
+-      0x70, 0x9d, 0x10, 0x6e, 0x1a, 0x12, 0x0c, 0xed, 0x54, 0xfa, 0x89, 0x9d,
+-      0x4c, 0x38, 0xe8, 0xd7, 0x31, 0xa5, 0x8f, 0x98, 0xb9, 0xcf, 0xf1, 0x11,
+-      0x59, 0x2f, 0xee, 0x54, 0x52, 0x99, 0x0a, 0x8e, 0x43, 0x6c, 0xf7, 0xb2,
+-      0x8c, 0x33, 0x29, 0xe3, 0x79, 0x62, 0xd1, 0xfc, 0x49, 0x19, 0x67, 0x37,
+-      0x49, 0x2e, 0x2b, 0x32, 0x16, 0xa1, 0x96, 0x72, 0x54, 0x52, 0x8e, 0x63,
+-      0x66, 0x85, 0x32, 0xa0, 0xe5, 0x64, 0xab, 0x61, 0xff, 0x8c, 0x39, 0x58,
+-      0x63, 0xfa, 0x94, 0x65, 0xce, 0xbd, 0xbc, 0x6c, 0x9f, 0x5f, 0xec, 0x49,
+-      0x7d, 0x61, 0xfb, 0x8c, 0x9c, 0x9c, 0x65, 0xfd, 0x3a, 0x4e, 0xcd, 0xbd,
+-      0x0e, 0xa5, 0xfb, 0x8b, 0xd0, 0x48, 0x5c, 0xaf, 0x1f, 0x30, 0xfa, 0x36,
+-      0x2a, 0x22, 0xab, 0x87, 0xbf, 0x9d, 0x75, 0x03, 0xea, 0xf3, 0xff, 0x2f,
+-      0xbc, 0xd2, 0x8e, 0xdd, 0x58, 0x91, 0xcc, 0xd9, 0xb0, 0xe3, 0xbf, 0xb5,
+-      0x62, 0xbf, 0xb2, 0x46, 0x48, 0x7b, 0xce, 0xb8, 0xb0, 0x84, 0x7d, 0x1f,
+-      0x33, 0x1f, 0x56, 0x2c, 0xed, 0xc2, 0x45, 0xd9, 0xaf, 0x57, 0x29, 0x63,
+-      0x77, 0xfa, 0x3a, 0xdc, 0x31, 0x30, 0x6e, 0x7b, 0x8d, 0x05, 0xc8, 0x84,
+-      0x43, 0xed, 0x3d, 0x8a, 0x17, 0xbb, 0xd2, 0x2e, 0x2c, 0x1a, 0x20, 0x5f,
+-      0x33, 0xe3, 0x4a, 0x6c, 0x7a, 0x8e, 0x87, 0x2f, 0x4c, 0x32, 0x1f, 0xcd,
+-      0x4a, 0x7e, 0xd8, 0xd6, 0xbe, 0x30, 0xf1, 0x80, 0x12, 0xd3, 0x3e, 0xbf,
+-      0x98, 0x4c, 0x1d, 0xfd, 0xae, 0xea, 0xf0, 0x30, 0x1f, 0xde, 0x3c, 0xe8,
+-      0xa3, 0x2f, 0x28, 0xf4, 0x13, 0x3f, 0x7d, 0xbf, 0x01, 0x6f, 0xd3, 0x37,
+-      0xee, 0x67, 0x5c, 0xfc, 0xfb, 0xd1, 0x2a, 0xdc, 0xb6, 0x27, 0x8a, 0x97,
+-      0x0f, 0xfa, 0xd1, 0xbe, 0xe7, 0x56, 0xbc, 0xc5, 0x72, 0x63, 0x8c, 0x07,
+-      0x63, 0xc3, 0x95, 0xfc, 0xf8, 0xf9, 0xa9, 0xe2, 0x67, 0x2d, 0xf1, 0xa8,
+-      0x02, 0x27, 0xf7, 0xbb, 0xd0, 0x32, 0xa0, 0x62, 0xc0, 0x54, 0x70, 0xf7,
+-      0x4d, 0x32, 0x1e, 0x2f, 0xd6, 0xd4, 0x5e, 0xb6, 0x8b, 0x25, 0x49, 0xe1,
+-      0x70, 0x5e, 0xce, 0x93, 0x8e, 0x43, 0xf4, 0xcb, 0xdb, 0xc8, 0xc1, 0x76,
+-      0xf4, 0xb5, 0xd1, 0x8f, 0x6c, 0xcc, 0x0a, 0xff, 0x18, 0x2b, 0xb4, 0x1e,
+-      0xc9, 0x6b, 0x9d, 0x75, 0xfe, 0x14, 0xe7, 0x71, 0xc2, 0x53, 0x6f, 0x4d,
+-      0x43, 0x51, 0x2c, 0x10, 0x0d, 0x69, 0x47, 0xb0, 0x1c, 0x7d, 0x63, 0xd0,
+-      0x64, 0xcd, 0x7f, 0x1b, 0x79, 0xd4, 0x76, 0xf2, 0xa8, 0xee, 0xcc, 0x11,
+-      0xce, 0xb1, 0xcf, 0x2b, 0x7b, 0xdf, 0xdb, 0xa8, 0xbb, 0xc5, 0x0e, 0x27,
+-      0xf2, 0x5a, 0x45, 0x6c, 0xff, 0x38, 0x63, 0xd2, 0x82, 0xfe, 0x1c, 0x6e,
+-      0x7c, 0xd6, 0xf4, 0x3c, 0x8c, 0x69, 0x3d, 0xf4, 0xf9, 0x5c, 0xdb, 0x3b,
+-      0x85, 0x9b, 0x79, 0xca, 0x62, 0x65, 0xd1, 0xd0, 0x86, 0xd7, 0xa9, 0x7c,
+-      0x2f, 0xdb, 0xdc, 0x3a, 0xb9, 0x8f, 0xd0, 0xcb, 0x36, 0x7b, 0x58, 0xb7,
+-      0xbe, 0xdf, 0xe2, 0x5c, 0xba, 0x59, 0x3f, 0x14, 0xd8, 0xa8, 0x98, 0xac,
+-      0xeb, 0xe4, 0x11, 0xa8, 0xd9, 0x7f, 0x79, 0xae, 0xda, 0x88, 0x31, 0xfd,
+-      0x93, 0xfe, 0x7e, 0x7e, 0xf4, 0x3a, 0x84, 0x68, 0x24, 0x4f, 0x9b, 0x9b,
+-      0xa0, 0xd3, 0x66, 0x5d, 0x93, 0x7d, 0x6d, 0x97, 0x71, 0xb8, 0x67, 0xc6,
+-      0x66, 0xb2, 0x8f, 0xbe, 0x4c, 0x48, 0xeb, 0x42, 0xfd, 0x89, 0x69, 0x90,
+-      0x71, 0x48, 0x7f, 0xcb, 0xf1, 0xe4, 0xd8, 0xd5, 0xe3, 0xa8, 0x26, 0x3e,
+-      0x5d, 0x2c, 0x98, 0x3c, 0x33, 0xe7, 0xe4, 0xe2, 0x31, 0xc7, 0xc7, 0x76,
+-      0x38, 0xf2, 0x7b, 0xd8, 0x66, 0x36, 0xb7, 0x07, 0x22, 0x69, 0x95, 0x32,
+-      0xc2, 0x58, 0xd1, 0x96, 0x54, 0x62, 0x15, 0xd1, 0xfa, 0xce, 0x69, 0x08,
+-      0x45, 0x7e, 0xc6, 0xb6, 0xa7, 0xb1, 0xed, 0x67, 0xd9, 0x76, 0x8a, 0x6d,
+-      0x8f, 0xb0, 0xed, 0x1f, 0x5c, 0x6a, 0x5b, 0xc5, 0xfd, 0x7b, 0xf2, 0xb6,
+-      0xe5, 0x46, 0xa4, 0x89, 0x59, 0xdf, 0x34, 0xd9, 0x03, 0xad, 0xe6, 0xdc,
+-      0x8b, 0xee, 0x74, 0xc6, 0xf6, 0x9c, 0xbd, 0x2d, 0x60, 0xec, 0xb9, 0x6b,
+-      0x8f, 0x82, 0xf7, 0xc3, 0xef, 0x63, 0xc2, 0x9f, 0xe3, 0x11, 0x79, 0x1b,
+-      0xd2, 0x68, 0x43, 0x5a, 0xf2, 0x7f, 0xd2, 0xf4, 0xa5, 0x8e, 0xd8, 0x8f,
+-      0xec, 0x3f, 0x90, 0x3f, 0x27, 0x44, 0x1f, 0xbf, 0x23, 0xee, 0x86, 0x4e,
+-      0xbc, 0xc7, 0xd8, 0xf9, 0xa3, 0x8c, 0x07, 0xe9, 0xb4, 0x0f, 0xcf, 0x66,
+-      0x04, 0x1b, 0xdb, 0x88, 0x8d, 0x82, 0xf7, 0xe4, 0x81, 0xc3, 0x47, 0x1f,
+-      0x0b, 0xb0, 0xf2, 0xb3, 0xb4, 0x9f, 0x67, 0x69, 0x3f, 0xcf, 0x0e, 0xfb,
+-      0x70, 0xf3, 0x21, 0x2f, 0xce, 0x11, 0x6b, 0x7a, 0x59, 0x26, 0x91, 0x6a,
+-      0xc0, 0x4d, 0xe4, 0x59, 0x87, 0x7b, 0x19, 0x97, 0x19, 0xff, 0xeb, 0xb2,
+-      0x1a, 0x76, 0xf5, 0x57, 0xa0, 0x7e, 0x48, 0x62, 0x70, 0x05, 0x1e, 0xe9,
+-      0xf3, 0x62, 0xce, 0x7e, 0xd9, 0x87, 0x24, 0x2f, 0xec, 0xbb, 0x13, 0xc3,
+-      0x8e, 0x8f, 0x4f, 0xa3, 0x7f, 0x54, 0xa2, 0x76, 0x48, 0xae, 0xc9, 0x53,
+-      0x68, 0xb3, 0x0b, 0x0e, 0x55, 0x71, 0xbc, 0xb7, 0x62, 0xfe, 0xa1, 0x00,
+-      0xf1, 0xdc, 0x8f, 0x48, 0x76, 0xf9, 0x45, 0xc1, 0xe4, 0xed, 0x63, 0x53,
+-      0x63, 0x9a, 0xf8, 0xa1, 0x83, 0x61, 0x91, 0x3c, 0x86, 0x5d, 0x7e, 0x3e,
+-      0x15, 0x27, 0x7f, 0xcb, 0x67, 0x52, 0x26, 0x1f, 0x7b, 0xa6, 0xe2, 0xe2,
+-      0x65, 0x7c, 0x6a, 0x1c, 0x90, 0x6f, 0x0d, 0xed, 0xf3, 0xc4, 0xd7, 0xaf,
+-      0x43, 0xc4, 0x91, 0xe7, 0xfe, 0x62, 0x96, 0x0b, 0xe4, 0xfc, 0x7d, 0x2a,
+-      0x9e, 0xfb, 0x26, 0xfd, 0xd4, 0x85, 0x58, 0x45, 0x8e, 0x0b, 0xdf, 0xbe,
+-      0xa7, 0x01, 0xbb, 0xa8, 0x8f, 0x56, 0xfa, 0x91, 0x2f, 0x1c, 0xb5, 0xad,
+-      0x0a, 0xc9, 0x5b, 0x2b, 0x71, 0xe7, 0x1e, 0x3f, 0x63, 0xf8, 0xb5, 0x48,
+-      0x0e, 0xcf, 0x66, 0x5b, 0xd5, 0xe8, 0x9d, 0xcc, 0xe7, 0xb7, 0xa7, 0x96,
+-      0xd9, 0x0f, 0x39, 0x7b, 0xf2, 0xb2, 0xf6, 0xff, 0xda, 0x7d, 0xde, 0xd0,
+-      0xb8, 0xce, 0x7c, 0xde, 0x64, 0xce, 0x41, 0x0e, 0x76, 0x02, 0xa1, 0x4a,
+-      0xe6, 0xe7, 0x46, 0x39, 0x16, 0x31, 0x9f, 0x7f, 0xc8, 0x2f, 0xcf, 0x6e,
+-      0x15, 0x59, 0x9c, 0xf2, 0x97, 0xc7, 0xb8, 0x6b, 0xca, 0x18, 0xeb, 0x23,
+-      0xd3, 0x90, 0xe7, 0x63, 0x5f, 0xd8, 0x7f, 0x6f, 0x40, 0xe9, 0x0f, 0xd1,
+-      0x6a, 0x1b, 0x83, 0x7d, 0x0f, 0x29, 0x86, 0xd6, 0xa4, 0x12, 0xba, 0x46,
+-      0xdf, 0xc4, 0x92, 0xec, 0x2f, 0x10, 0xcb, 0xae, 0xf6, 0x8a, 0x2c, 0xf7,
+-      0x67, 0x57, 0x61, 0x9c, 0x73, 0x5c, 0xc4, 0x3a, 0x37, 0xf4, 0xfa, 0x68,
+-      0xa3, 0x50, 0x0e, 0x37, 0xd7, 0xe1, 0x43, 0xf2, 0x9c, 0xb6, 0xe4, 0x9b,
+-      0xd0, 0x18, 0x5f, 0xef, 0x4c, 0xfe, 0x02, 0x65, 0xc4, 0x94, 0x3b, 0x92,
+-      0x5f, 0xd8, 0x23, 0xa1, 0x7d, 0x4e, 0xbd, 0xc2, 0xd1, 0x03, 0x17, 0xfb,
+-      0x2e, 0xc7, 0x27, 0xad, 0xd0, 0x78, 0xe5, 0x2a, 0x3c, 0x6c, 0x68, 0xd9,
+-      0x9c, 0x18, 0xfd, 0x5f, 0x9e, 0xe8, 0xaf, 0x7f, 0xfa, 0xfd, 0xe6, 0x9c,
+-      0x5d, 0xea, 0x99, 0xbb, 0xf0, 0x2d, 0x07, 0x77, 0xd7, 0x6c, 0x74, 0x47,
+-      0x3b, 0x1e, 0x93, 0xb5, 0xd0, 0x35, 0xce, 0x3a, 0x41, 0x3b, 0x76, 0xee,
+-      0x6d, 0xc3, 0xe6, 0xbd, 0x82, 0xad, 0xf5, 0xad, 0x8b, 0x94, 0x19, 0xf4,
+-      0xc3, 0x01, 0x27, 0x97, 0x71, 0x1b, 0x9f, 0xca, 0x9a, 0xab, 0xea, 0x71,
+-      0xf6, 0xc0, 0x74, 0xac, 0x19, 0xcd, 0xb5, 0x35, 0x2b, 0x53, 0x4a, 0xff,
+-      0x8a, 0x22, 0xc9, 0x9c, 0xc5, 0xc7, 0xd8, 0xc9, 0x79, 0xc1, 0xa9, 0x7e,
+-      0x89, 0x3b, 0x0a, 0x7c, 0xf7, 0xc8, 0x5e, 0xe6, 0x32, 0xe4, 0xf9, 0x7a,
+-      0x4c, 0xdb, 0xcc, 0xdf, 0x3b, 0x8a, 0x73, 0x72, 0x6d, 0xbe, 0x8a, 0x17,
+-      0xe5, 0xed, 0x41, 0x74, 0x97, 0xb7, 0xa1, 0x4f, 0x39, 0x06, 0xe6, 0xd8,
+-      0xe4, 0x83, 0x97, 0xfd, 0xf9, 0x8b, 0x22, 0x67, 0x5d, 0x30, 0x3b, 0x35,
+-      0xbe, 0x6f, 0x9f, 0xd4, 0xfd, 0x75, 0xc5, 0xf9, 0xd8, 0x94, 0x93, 0xd7,
+-      0x24, 0x16, 0x5e, 0x83, 0x98, 0x3f, 0xef, 0xff, 0xdf, 0xe4, 0xf3, 0xcd,
+-      0x82, 0x01, 0x93, 0x75, 0xef, 0x2e, 0x41, 0xf1, 0x76, 0x87, 0xc3, 0x5d,
+-      0x6e, 0x9f, 0x64, 0xf8, 0x8a, 0xf6, 0xa7, 0xda, 0xaf, 0xb4, 0x2f, 0x71,
+-      0x5a, 0x74, 0xda, 0xc8, 0xba, 0xa2, 0x3f, 0x07, 0xa3, 0x65, 0x4d, 0x96,
+-      0xdc, 0xad, 0xcd, 0xd9, 0xa7, 0x29, 0x26, 0x6f, 0xee, 0x66, 0x0e, 0x55,
+-      0xb2, 0x9f, 0xd7, 0xe4, 0x3e, 0x4b, 0x07, 0x02, 0x28, 0xda, 0xef, 0x21,
+-      0xae, 0xcf, 0x80, 0x7b, 0x7f, 0x01, 0xed, 0x55, 0x38, 0xc2, 0x6b, 0xf7,
+-      0x6d, 0x31, 0xae, 0x85, 0x6b, 0x7f, 0x21, 0x79, 0xb9, 0x70, 0xbe, 0x13,
+-      0xf7, 0xad, 0x65, 0x1c, 0x57, 0xf7, 0x7b, 0x19, 0x9f, 0xab, 0xe1, 0x61,
+-      0xcc, 0x5b, 0x32, 0xf0, 0x67, 0x28, 0xd8, 0x5f, 0x8c, 0x07, 0x06, 0xae,
+-      0xc7, 0xcc, 0xfd, 0x25, 0xb8, 0x7f, 0x60, 0x26, 0x66, 0xec, 0x97, 0xdc,
+-      0x49, 0x47, 0x60, 0x7f, 0x29, 0x56, 0x0c, 0x04, 0x51, 0xb1, 0xbf, 0x0c,
+-      0x6d, 0x03, 0xb3, 0xa0, 0xed, 0x2f, 0xc7, 0x5d, 0x03, 0x35, 0x28, 0xdf,
+-      0xaf, 0xe1, 0xce, 0x01, 0x03, 0x65, 0xfb, 0x2b, 0x18, 0xd3, 0x42, 0x8c,
+-      0x9d, 0x7e, 0x2c, 0xdf, 0xc3, 0xb9, 0x39, 0x58, 0x45, 0xbf, 0x58, 0x45,
+-      0x4e, 0xbd, 0x1a, 0xfb, 0x52, 0x73, 0x50, 0x72, 0x30, 0x80, 0xa5, 0x7b,
+-      0xc6, 0x35, 0x52, 0x1a, 0x2c, 0x0e, 0x35, 0xa0, 0xe8, 0xa0, 0xe4, 0x7e,
+-      0xc1, 0x13, 0x2d, 0x08, 0x5e, 0x58, 0x84, 0x72, 0xe6, 0xbe, 0xc0, 0x7b,
+-      0x63, 0xc0, 0xec, 0x31, 0x17, 0x8e, 0x68, 0xab, 0xb0, 0x75, 0xec, 0x9b,
+-      0x93, 0x36, 0x2f, 0xfb, 0x47, 0xe5, 0x9c, 0x5f, 0xb9, 0x96, 0x7b, 0xab,
+-      0xd1, 0x33, 0x96, 0x5f, 0x07, 0x0b, 0xf6, 0x6d, 0xa7, 0x06, 0xc7, 0x33,
+-      0xf2, 0x4c, 0x7c, 0x04, 0xb4, 0x6f, 0xa5, 0x5b, 0xce, 0x8f, 0xbb, 0xa2,
+-      0x6a, 0x59, 0x77, 0xf3, 0x86, 0x5b, 0xe2, 0x99, 0x4d, 0xcc, 0xbb, 0x24,
+-      0x87, 0xdd, 0x78, 0xcb, 0x9a, 0xcc, 0x07, 0x97, 0xf6, 0x13, 0xfa, 0xcc,
+-      0x85, 0x01, 0x0d, 0x5f, 0xc3, 0x1a, 0x67, 0x0d, 0x55, 0xe5, 0x9c, 0xc9,
+-      0x79, 0x56, 0xe7, 0x2c, 0x39, 0xed, 0x2c, 0x0e, 0xd3, 0xc1, 0xd4, 0x75,
+-      0xa8, 0xc9, 0x38, 0x6b, 0xb5, 0x75, 0x71, 0xbc, 0xa0, 0xb6, 0x1a, 0xd6,
+-      0xe4, 0xd9, 0x0f, 0x6b, 0xbe, 0x86, 0x98, 0xa9, 0x5d, 0x3a, 0x1f, 0x12,
+-      0xd4, 0x47, 0x10, 0x0c, 0x6c, 0xc3, 0x3a, 0xe7, 0x7c, 0xa0, 0x12, 0x6d,
+-      0x97, 0x73, 0x46, 0xfc, 0x5e, 0x0d, 0x23, 0x93, 0x5f, 0x6b, 0x94, 0xb3,
+-      0xd7, 0xb2, 0x8f, 0x65, 0x33, 0xe7, 0x97, 0x3c, 0xf9, 0x88, 0xa2, 0xf6,
+-      0x3a, 0xeb, 0x63, 0xab, 0x5c, 0x8c, 0x01, 0x2d, 0x0a, 0xe2, 0x45, 0xd1,
+-      0x90, 0xfe, 0xe1, 0xe4, 0xba, 0x83, 0x67, 0x74, 0x8b, 0x52, 0x30, 0xda,
+-      0xa3, 0xb8, 0x47, 0x73, 0xeb, 0x0e, 0x2e, 0xf2, 0xd8, 0x6d, 0xa9, 0x4a,
+-      0x96, 0xd1, 0x30, 0x7b, 0xae, 0x1b, 0xaf, 0x26, 0xca, 0x9c, 0xb3, 0xc7,
+-      0x5b, 0xe7, 0x16, 0xe0, 0x11, 0xda, 0x7e, 0xeb, 0x8d, 0xc7, 0xf0, 0x41,
+-      0x86, 0x5c, 0x23, 0x61, 0x85, 0x87, 0xd9, 0xe7, 0xd1, 0x84, 0x8a, 0x17,
+-      0x07, 0xb7, 0x84, 0x87, 0x9c, 0xfe, 0xbf, 0x8d, 0xcd, 0x23, 0x92, 0x77,
+-      0xb5, 0xd9, 0xdb, 0x53, 0xed, 0xb6, 0xc4, 0xdd, 0x6c, 0xa2, 0x92, 0xb9,
+-      0xb9, 0x86, 0x0f, 0xe6, 0x6e, 0xc0, 0x39, 0x96, 0x19, 0x4d, 0x6c, 0xc4,
+-      0x27, 0xe4, 0x08, 0x99, 0xc4, 0x72, 0xbc, 0xc6, 0x5c, 0xf2, 0x7b, 0x89,
+-      0x56, 0xe6, 0x96, 0xab, 0xf0, 0xca, 0xa0, 0xf0, 0x8f, 0x16, 0x2c, 0x4c,
+-      0x28, 0x58, 0x1a, 0x5a, 0x85, 0x93, 0xc3, 0xcc, 0x29, 0x07, 0xe5, 0xbc,
+-      0xeb, 0x35, 0x58, 0x93, 0x3b, 0x0f, 0xc5, 0xe7, 0x31, 0x3e, 0x5f, 0x89,
+-      0xa3, 0xc3, 0x01, 0x1c, 0x60, 0x0e, 0xf9, 0x0e, 0x31, 0x64, 0x28, 0xd1,
+-      0x80, 0xd3, 0xcc, 0x95, 0x7e, 0x94, 0x88, 0xe0, 0x33, 0xfe, 0x3e, 0x92,
+-      0x90, 0xf5, 0xef, 0x66, 0x5c, 0xc8, 0xfc, 0x18, 0x05, 0xbd, 0x33, 0x70,
+-      0xbc, 0xed, 0x79, 0x52, 0xc9, 0x23, 0xfc, 0xb4, 0xe2, 0xf4, 0x70, 0x2b,
+-      0xce, 0x0c, 0x2e, 0xc3, 0x99, 0xe1, 0x5f, 0xe1, 0x83, 0x41, 0x91, 0x57,
+-      0xce, 0x2c, 0x3a, 0xef, 0x16, 0xb0, 0x5d, 0xe2, 0xd4, 0xf0, 0xbf, 0xa5,
+-      0xed, 0x8f, 0xec, 0xe3, 0xab, 0xa4, 0xdd, 0xe7, 0xff, 0x48, 0xdb, 0xa2,
+-      0x4b, 0x89, 0xf5, 0x5e, 0x9c, 0x4c, 0x78, 0x99, 0x57, 0x8d, 0xdf, 0x50,
+-      0x84, 0xf1, 0xf9, 0xcc, 0x36, 0xb1, 0x3d, 0x53, 0x88, 0x17, 0xfb, 0xdc,
+-      0xe4, 0x8a, 0x5f, 0x25, 0x7e, 0x74, 0xd2, 0x0e, 0x0b, 0x99, 0xbf, 0x79,
+-      0xa9, 0xe3, 0xf9, 0xc4, 0xfb, 0x55, 0xd4, 0x9f, 0x0f, 0xa7, 0x12, 0x7e,
+-      0xbc, 0x9e, 0xa8, 0x8f, 0x67, 0x95, 0x46, 0x58, 0x15, 0xb9, 0xbc, 0xf2,
+-      0x68, 0xa2, 0xc3, 0x91, 0xe9, 0xd5, 0x44, 0x9b, 0xbd, 0x95, 0x3a, 0xee,
+-      0x49, 0x7d, 0xdb, 0x39, 0x6f, 0xf8, 0x4a, 0xe2, 0x82, 0x2d, 0xe7, 0x88,
+-      0x9f, 0xa1, 0x4e, 0x4f, 0x26, 0xe2, 0x28, 0x62, 0x9e, 0x72, 0x2c, 0x31,
+-      0x8e, 0x61, 0xda, 0xe5, 0x3b, 0x7d, 0xc6, 0x89, 0x35, 0xd8, 0x84, 0xcf,
+-      0xd2, 0x85, 0x78, 0x8b, 0x7d, 0x94, 0x37, 0xb9, 0x31, 0xe1, 0xb4, 0xb7,
+-      0x09, 0x9f, 0xf4, 0x29, 0xc8, 0xcc, 0xdd, 0x84, 0x8f, 0xf9, 0xec, 0x0d,
+-      0x5e, 0x9f, 0x0b, 0x53, 0xc2, 0xc9, 0x67, 0x67, 0xfa, 0x54, 0x27, 0x07,
+-      0xee, 0x6e, 0xde, 0x84, 0xd3, 0xe9, 0x8f, 0x71, 0x80, 0xb9, 0xf4, 0x63,
+-      0xe6, 0x34, 0x44, 0xa6, 0x11, 0x70, 0x8d, 0x42, 0x9c, 0xe4, 0xf3, 0x5a,
+-      0x59, 0xef, 0xd1, 0x72, 0xe5, 0x3f, 0xe2, 0x78, 0x1e, 0x61, 0x5b, 0x67,
+-      0xd3, 0xdf, 0x61, 0xbb, 0xc2, 0x39, 0xbf, 0xc3, 0x76, 0x7f, 0x85, 0x91,
+-      0x49, 0x7d, 0x9c, 0x36, 0x65, 0x5c, 0x1b, 0x7c, 0x28, 0xf6, 0x73, 0x1c,
+-      0x0f, 0xf3, 0xbb, 0x03, 0x13, 0x99, 0x9d, 0xfc, 0x7e, 0x0d, 0x87, 0x33,
+-      0x12, 0xdb, 0xf3, 0x67, 0x87, 0x64, 0x7d, 0x4b, 0xfc, 0x47, 0x9f, 0x5c,
+-      0x97, 0x9b, 0x8e, 0x54, 0x7f, 0x59, 0x7c, 0x1a, 0xed, 0xe8, 0x3f, 0xcc,
+-      0x2b, 0xc7, 0x47, 0x61, 0x0b, 0xbb, 0x0e, 0xb8, 0x91, 0xea, 0x25, 0x9f,
+-      0xed, 0xad, 0xc4, 0x53, 0xbb, 0x35, 0x3c, 0xb9, 0xfb, 0x5a, 0x6c, 0xd9,
+-      0x7d, 0x3d, 0xf6, 0xed, 0xae, 0x46, 0x92, 0xb9, 0xf2, 0x27, 0x4d, 0xb6,
+-      0x3d, 0x87, 0x9f, 0x1d, 0xf4, 0x05, 0x2f, 0xbf, 0x5f, 0x0e, 0x8b, 0x9f,
+-      0x18, 0xb8, 0xd1, 0xf1, 0x97, 0x16, 0xdc, 0xe0, 0x7c, 0xc7, 0x30, 0x27,
+-      0xd3, 0x19, 0xde, 0x90, 0xdd, 0x14, 0x7e, 0x28, 0x3b, 0x1d, 0x5b, 0xfb,
+-      0xab, 0xd0, 0xbf, 0xbb, 0x32, 0x5e, 0xc9, 0x7e, 0x56, 0xce, 0xb3, 0x31,
+-      0xc4, 0xba, 0x66, 0x63, 0x4f, 0x78, 0x4d, 0xf6, 0x79, 0xb4, 0x65, 0xfd,
+-      0xd8, 0xdc, 0x1f, 0x60, 0x5f, 0xb2, 0x86, 0xef, 0x3e, 0xf1, 0x20, 0x6c,
+-      0xfb, 0x42, 0xd3, 0x11, 0xc6, 0xb7, 0x1f, 0xa3, 0x9d, 0xcf, 0x92, 0xfd,
+-      0x1b, 0xc8, 0xa9, 0x0a, 0xe2, 0xde, 0xa8, 0x8d, 0x53, 0xe1, 0x71, 0xdc,
+-      0xc1, 0xf6, 0x76, 0xf6, 0x97, 0x51, 0xa6, 0xe2, 0x78, 0x21, 0xef, 0x2d,
+-      0x0d, 0x6f, 0xc4, 0xae, 0x31, 0x59, 0x03, 0x3c, 0x81, 0xa5, 0xe4, 0x2c,
+-      0x15, 0x73, 0x7f, 0x56, 0x82, 0x32, 0xcd, 0x7d, 0xbe, 0x59, 0xec, 0x2f,
+-      0x4e, 0xfb, 0x13, 0xac, 0x5c, 0x87, 0xb5, 0xce, 0xd9, 0xc2, 0x76, 0xbc,
+-      0x94, 0x10, 0x9c, 0x5e, 0x8d, 0x83, 0x89, 0x75, 0xd8, 0x92, 0x92, 0x7d,
+-      0xc0, 0xe5, 0xa8, 0xc9, 0xfe, 0x55, 0x78, 0x3d, 0xe3, 0xa9, 0x2b, 0xfb,
+-      0x3f, 0xb0, 0x38, 0x9b, 0xa6, 0x5c, 0xc3, 0xe1, 0xb5, 0xd9, 0x7d, 0xe1,
+-      0x07, 0xb3, 0xad, 0x98, 0x95, 0x95, 0xf5, 0xb4, 0x36, 0xe2, 0xbb, 0xac,
+-      0xa7, 0x4d, 0x60, 0x61, 0xf6, 0x0c, 0x16, 0x65, 0xdf, 0x62, 0x2c, 0x16,
+-      0xdc, 0x90, 0x75, 0xb6, 0x5f, 0x31, 0x39, 0x91, 0x7d, 0xc3, 0xbf, 0xc4,
+-      0xd6, 0xbd, 0x71, 0xc6, 0xc2, 0x3c, 0x46, 0xd5, 0x6b, 0x07, 0x04, 0x5f,
+-      0xc6, 0x3c, 0x4e, 0x2c, 0xe8, 0x4b, 0xdd, 0x43, 0x7b, 0x54, 0xc9, 0xf3,
+-      0x25, 0xce, 0xac, 0xa3, 0x2f, 0x77, 0x92, 0x9f, 0x4b, 0xfc, 0xbb, 0x6b,
+-      0xf2, 0xbe, 0xf0, 0x3a, 0x89, 0x7d, 0x3a, 0x8e, 0x66, 0x9c, 0xbd, 0x0c,
+-      0xdd, 0x6b, 0xdc, 0xc1, 0x67, 0x52, 0xff, 0x2f, 0x91, 0xdc, 0xbb, 0xca,
+-      0xde, 0xe9, 0xac, 0x19, 0x29, 0x38, 0x1e, 0x62, 0x5f, 0xa4, 0x91, 0x4b,
+-      0xf7, 0xcb, 0x59, 0xce, 0x75, 0x72, 0x96, 0xd3, 0x72, 0x19, 0x6d, 0xf6,
+-      0x96, 0x14, 0x1e, 0x2c, 0x45, 0x00, 0xcb, 0x47, 0x0b, 0x10, 0x3b, 0x58,
+-      0x8c, 0xdb, 0x77, 0xb7, 0xd3, 0x96, 0x2d, 0xda, 0xaf, 0x61, 0xae, 0x55,
+-      0x8a, 0xb1, 0x84, 0xf7, 0x1e, 0xe8, 0x0f, 0xb6, 0x02, 0xa1, 0x13, 0xa7,
+-      0x5d, 0xc5, 0xb8, 0x9f, 0xb1, 0x23, 0x9d, 0x5e, 0x8e, 0xd8, 0xfe, 0xe3,
+-      0xb0, 0xd2, 0xb4, 0xc9, 0x3d, 0xc4, 0x99, 0xbd, 0x6e, 0xa8, 0xd1, 0x5f,
+-      0x61, 0xdf, 0xb0, 0x8a, 0xf2, 0x3d, 0x2f, 0xd8, 0x01, 0x43, 0x31, 0xce,
+-      0x85, 0xb2, 0xe4, 0x40, 0x6e, 0x94, 0x26, 0x5b, 0x30, 0x4a, 0xac, 0xf1,
+-      0x25, 0x63, 0xc8, 0x64, 0xda, 0x90, 0x26, 0x96, 0xa4, 0xc9, 0x9b, 0x4a,
+-      0x92, 0x26, 0x63, 0x79, 0x1d, 0x76, 0xd1, 0x5f, 0x0a, 0x98, 0xcb, 0x6f,
+-      0xcb, 0xdc, 0x0a, 0x6b, 0xf8, 0x4e, 0x6c, 0x1f, 0x6e, 0xe3, 0x87, 0xfc,
+-      0x71, 0xf8, 0xdb, 0x58, 0x38, 0x7a, 0x02, 0x3d, 0x99, 0x38, 0xed, 0xf1,
+-      0x63, 0x6c, 0x4f, 0x1f, 0xc3, 0x53, 0x7d, 0x5d, 0xcc, 0x11, 0x8e, 0xe1,
+-      0x49, 0x5e, 0xf7, 0xf5, 0x19, 0x9d, 0x01, 0xf5, 0x18, 0x52, 0xe9, 0x4d,
+-      0xb8, 0xb3, 0x5f, 0x61, 0x0e, 0xb7, 0x09, 0x77, 0xec, 0xa7, 0x2d, 0x3e,
+-      0xd1, 0x81, 0xd6, 0xd1, 0xd7, 0x90, 0xc8, 0xbc, 0xc4, 0xfc, 0x6a, 0x23,
+-      0x7a, 0x52, 0x1b, 0xc8, 0xbd, 0x9e, 0x67, 0x3b, 0x47, 0xe8, 0xe7, 0x9d,
+-      0x1c, 0xe3, 0xe3, 0xfc, 0x5c, 0xc2, 0x70, 0x4d, 0x57, 0xf2, 0x58, 0x4d,
+-      0xbf, 0x4f, 0x49, 0xee, 0xb0, 0x8e, 0x38, 0x71, 0x6f, 0x29, 0x8a, 0x45,
+-      0xbf, 0xf9, 0x35, 0x69, 0x99, 0x0b, 0xb1, 0x7d, 0x59, 0x9b, 0x76, 0xa3,
+-      0x28, 0x29, 0xeb, 0xd1, 0xe3, 0xc1, 0x22, 0x72, 0x00, 0x6f, 0x52, 0x74,
+-      0xd8, 0x6e, 0x77, 0xa7, 0x04, 0x4b, 0x72, 0xdc, 0xfc, 0xe5, 0xcc, 0xaf,
+-      0xb0, 0x75, 0x70, 0x1a, 0x16, 0xf5, 0x55, 0x23, 0xee, 0xb7, 0xed, 0xe7,
+-      0xe8, 0x6b, 0x09, 0xe6, 0x58, 0xbb, 0xfa, 0x63, 0xc4, 0x94, 0x12, 0xe4,
+-      0x72, 0x3d, 0xd1, 0x4d, 0xd0, 0xd4, 0xaf, 0xd8, 0x23, 0x99, 0xc5, 0x79,
+-      0x13, 0xee, 0x3a, 0x7e, 0x43, 0x29, 0xce, 0x97, 0xe4, 0xd6, 0xc5, 0xff,
+-      0xfc, 0x12, 0xb7, 0xf9, 0xd7, 0x95, 0xbf, 0xff, 0xdf, 0x58, 0x7e, 0x62,
+-      0xca, 0xd9, 0xb5, 0xfc, 0x7b, 0x39, 0x32, 0xd6, 0xeb, 0xe5, 0xdc, 0x9a,
+-      0x25, 0x7c, 0x49, 0xce, 0xdc, 0x1e, 0x4f, 0x14, 0x30, 0x4e, 0xaa, 0x0b,
+-      0x3c, 0x50, 0xfd, 0x1e, 0x14, 0x32, 0x9e, 0x55, 0x61, 0xb3, 0xdf, 0xc6,
+-      0x62, 0xb3, 0x00, 0x87, 0x1b, 0x62, 0x72, 0xce, 0xa2, 0xdd, 0xe3, 0xf0,
+-      0xd1, 0xd5, 0xf7, 0xfc, 0xe1, 0xba, 0xf5, 0x26, 0x72, 0x37, 0x39, 0x5f,
+-      0xd0, 0x86, 0x53, 0x15, 0xf2, 0xae, 0xd0, 0x26, 0xe7, 0xdc, 0x59, 0x51,
+-      0xad, 0xac, 0xa3, 0xe9, 0x38, 0x61, 0xd4, 0xeb, 0x95, 0x2a, 0xe3, 0xb9,
+-      0xf2, 0xae, 0x6d, 0xf9, 0xa3, 0x8c, 0xf5, 0x72, 0x86, 0xe2, 0x5f, 0xda,
+-      0xa7, 0x58, 0x83, 0xed, 0x4f, 0x34, 0x63, 0x62, 0x95, 0xc4, 0xff, 0xff,
+-      0xe6, 0xcb, 0x73, 0xba, 0x6d, 0xa9, 0x1f, 0x96, 0xca, 0xb9, 0x24, 0x69,
+-      0x7b, 0x3b, 0xf3, 0x27, 0x8f, 0x11, 0xc6, 0xbb, 0xc2, 0xd2, 0x9c, 0xfd,
+-      0xa4, 0x1c, 0xa7, 0x28, 0x34, 0xce, 0x4f, 0xbe, 0x3b, 0xf2, 0xd7, 0xa5,
+-      0xc2, 0x0f, 0xb7, 0xa5, 0x36, 0x91, 0x9b, 0x8b, 0x3c, 0xbf, 0xb7, 0xd7,
+-      0xf8, 0x2b, 0x59, 0xf6, 0xee, 0xc9, 0xf6, 0xc4, 0x16, 0xe4, 0x4c, 0x8e,
+-      0xdc, 0x93, 0x3a, 0xa2, 0xb3, 0xa9, 0x75, 0x5c, 0xcc, 0x85, 0x6f, 0xc0,
+-      0xa3, 0xf4, 0xc1, 0x99, 0xc6, 0xeb, 0x76, 0x97, 0x9c, 0x9f, 0xa9, 0xd5,
+-      0xa6, 0xf4, 0xf5, 0x0b, 0x47, 0x96, 0x42, 0xca, 0xd2, 0x9f, 0x92, 0xb3,
+-      0xa8, 0x9f, 0xd9, 0xb5, 0x55, 0xf2, 0xfc, 0xc2, 0x64, 0xfb, 0x35, 0xce,
+-      0xd9, 0xbe, 0x7d, 0xa9, 0xbc, 0xdc, 0xb2, 0xde, 0xea, 0xcf, 0xf7, 0x55,
+-      0x77, 0x79, 0x3c, 0x22, 0x5b, 0xbc, 0xf4, 0x4a, 0x99, 0xe1, 0xcb, 0x9f,
+-      0x59, 0x9d, 0xe1, 0xd4, 0xc9, 0xf7, 0x29, 0x32, 0x6e, 0x62, 0x9e, 0x7a,
+-      0xf5, 0x18, 0xb5, 0x29, 0x63, 0x92, 0x3a, 0x32, 0x2e, 0x6d, 0xd2, 0x0e,
+-      0x4a, 0xcb, 0x50, 0x2c, 0x75, 0x84, 0xbb, 0x6a, 0x0e, 0x07, 0x2f, 0x17,
+-      0x5e, 0x2e, 0xb6, 0x51, 0x66, 0xdb, 0xef, 0x39, 0x31, 0x53, 0xda, 0xe1,
+-      0x38, 0xc6, 0x56, 0xd1, 0xce, 0xed, 0x2e, 0xe2, 0xa7, 0xfd, 0x5e, 0x73,
+-      0x00, 0x5b, 0x13, 0xa2, 0x6b, 0x23, 0x70, 0x88, 0xd8, 0xb1, 0xd9, 0xe1,
+-      0x1b, 0x1e, 0x74, 0xa7, 0xf3, 0xfb, 0xa3, 0x85, 0x72, 0xf6, 0x36, 0x20,
+-      0x3a, 0xef, 0x36, 0xc9, 0xb3, 0xb4, 0x85, 0xba, 0x9b, 0x5c, 0x69, 0x3d,
+-      0xfe, 0x99, 0xf3, 0x2b, 0xe7, 0x8f, 0x73, 0x7b, 0x95, 0x71, 0xda, 0x51,
+-      0x2e, 0x5e, 0x81, 0xf1, 0x9d, 0x3c, 0x69, 0xf2, 0x5c, 0x66, 0x77, 0xe6,
+-      0x9f, 0xed, 0x71, 0xe7, 0x5c, 0xe6, 0xe5, 0x77, 0x3a, 0xd2, 0x9a, 0x6d,
+-      0x1f, 0xe0, 0xb3, 0xcb, 0x67, 0x34, 0x19, 0xd3, 0x0d, 0x39, 0xcb, 0xf9,
+-      0x4f, 0x9c, 0xbb, 0xa9, 0x65, 0xc7, 0x2b, 0x72, 0x67, 0x96, 0x63, 0xea,
+-      0x42, 0x23, 0x8f, 0xab, 0x41, 0xcb, 0x72, 0x70, 0xf5, 0x0e, 0x67, 0x0f,
+-      0x3e, 0x8d, 0x60, 0x6b, 0x1b, 0x2c, 0xbb, 0xd8, 0xc8, 0xe3, 0x80, 0x61,
+-      0xce, 0x51, 0xba, 0x30, 0x3b, 0x5c, 0x2c, 0x1c, 0x3b, 0xe8, 0x8e, 0x06,
+-      0xb5, 0x0f, 0x10, 0xaa, 0x3b, 0xe6, 0xec, 0x95, 0x0a, 0x36, 0x18, 0x58,
+-      0x9f, 0x21, 0xdf, 0x1e, 0x93, 0x77, 0x1d, 0xe5, 0xda, 0x69, 0x9f, 0xd7,
+-      0x82, 0xa5, 0xed, 0xc4, 0x52, 0xeb, 0xcf, 0x3d, 0x4e, 0x7b, 0xc1, 0xf6,
+-      0x61, 0x25, 0xd8, 0xba, 0x51, 0xc9, 0xb7, 0xe7, 0xfb, 0x92, 0xf6, 0xea,
+-      0x58, 0xbf, 0x7a, 0xf2, 0xfd, 0x42, 0x83, 0x6d, 0x5c, 0xbd, 0x9f, 0x3c,
+-      0x3d, 0x2e, 0x7b, 0x51, 0x87, 0x27, 0x39, 0xe1, 0xb1, 0x3f, 0xd8, 0x8b,
+-      0xfa, 0xd2, 0x3e, 0x63, 0xec, 0xb3, 0xb5, 0x58, 0x89, 0x91, 0x31, 0x74,
+-      0xa1, 0x30, 0x1c, 0xaa, 0x7b, 0x19, 0xd0, 0xdd, 0xd1, 0x50, 0x60, 0xd8,
+-      0xd9, 0xd3, 0x35, 0xbd, 0x8b, 0x9c, 0xfa, 0xd5, 0xe4, 0xc5, 0x7f, 0x5c,
+-      0x27, 0x25, 0x86, 0xd1, 0x56, 0xaf, 0xc4, 0xe6, 0x17, 0xb3, 0x9d, 0xba,
+-      0x30, 0xf4, 0x82, 0x68, 0x5e, 0x47, 0xa1, 0xba, 0x0f, 0x38, 0x9f, 0x47,
+-      0x9b, 0x43, 0x81, 0x21, 0xe7, 0x8c, 0xa7, 0xe8, 0xc5, 0xf4, 0xe6, 0xe6,
+-      0x5e, 0x17, 0xbe, 0xcd, 0x7c, 0x32, 0x8e, 0x91, 0x84, 0x97, 0x63, 0xa9,
+-      0xd7, 0xb6, 0xa3, 0x82, 0x36, 0x8e, 0xd8, 0xe6, 0x06, 0xe2, 0x77, 0x02,
+-      0x31, 0xd7, 0x8d, 0xe5, 0x88, 0x93, 0x40, 0xbb, 0x8c, 0x38, 0x39, 0x51,
+-      0x7d, 0xdd, 0x0e, 0xda, 0x6f, 0xda, 0x1f, 0x0c, 0x58, 0x88, 0xe3, 0xc5,
+-      0xc4, 0xc2, 0xff, 0xc7, 0x05, 0xcb, 0x2c, 0x81, 0xbc, 0x5f, 0x90, 0xbe,
+-      0x67, 0x59, 0x28, 0xa8, 0xbf, 0x32, 0xb9, 0x27, 0xdd, 0x9d, 0xf8, 0xad,
+-      0xbc, 0xc7, 0xc4, 0x7a, 0x7f, 0xac, 0x8c, 0xf4, 0xed, 0xc5, 0xa1, 0xbe,
+-      0x3e, 0x6c, 0x79, 0x82, 0x32, 0x1a, 0x36, 0x16, 0x9a, 0x5d, 0xcc, 0xa5,
+-      0x7d, 0x58, 0xa7, 0xcd, 0x8e, 0xa8, 0x2c, 0x37, 0x94, 0xce, 0xad, 0x3b,
+-      0x6e, 0x75, 0xf6, 0xbc, 0x7b, 0x98, 0xa3, 0x38, 0xf1, 0x53, 0xf3, 0x46,
+-      0x63, 0xca, 0xce, 0x4c, 0x8b, 0xb2, 0x23, 0x2d, 0x6d, 0x75, 0x2a, 0x3d,
+-      0x99, 0xbf, 0xa5, 0x4f, 0x58, 0x38, 0x6d, 0xca, 0xbb, 0x39, 0xd2, 0xae,
+-      0x85, 0xe1, 0xe6, 0x7f, 0xcd, 0x3b, 0x3a, 0xa2, 0xd3, 0x4e, 0x6c, 0x1e,
+-      0x7c, 0x1c, 0xdd, 0x83, 0xa7, 0x9c, 0x33, 0x46, 0x1e, 0xc3, 0x6b, 0x5d,
+-      0x1f, 0x0d, 0x1e, 0xb1, 0x90, 0x2d, 0x97, 0xf3, 0xf9, 0x55, 0xd1, 0x13,
+-      0xd8, 0xa9, 0xc9, 0xbb, 0x27, 0x3d, 0xe4, 0x11, 0xb2, 0x6f, 0xbb, 0x1a,
+-      0x5f, 0xef, 0x95, 0x39, 0x2c, 0xb3, 0x0a, 0xa3, 0xc1, 0xd8, 0x3a, 0x67,
+-      0x0e, 0x1b, 0x70, 0x32, 0xfb, 0x38, 0xde, 0xdb, 0xd3, 0x05, 0x35, 0x1c,
+-      0x0c, 0xdc, 0x06, 0xbb, 0xeb, 0xb8, 0x19, 0xb3, 0x3c, 0x08, 0x1e, 0x76,
+-      0xa9, 0xc0, 0x0b, 0x7b, 0xe0, 0x9d, 0xc1, 0xf9, 0x9f, 0xcf, 0x18, 0x5d,
+-      0x6e, 0xd8, 0x0b, 0xfe, 0xb1, 0x29, 0xd8, 0x63, 0xb8, 0xac, 0xbf, 0x99,
+-      0x8e, 0x60, 0x5f, 0x44, 0x35, 0xda, 0xef, 0x52, 0xa1, 0xf8, 0xa2, 0xf2,
+-      0x5e, 0x69, 0x17, 0xee, 0x6c, 0xf4, 0x59, 0xa5, 0xd1, 0x60, 0xdf, 0x29,
+-      0x25, 0x58, 0x67, 0xa9, 0x6d, 0x9c, 0xe7, 0x3a, 0xbc, 0x42, 0x0e, 0xd2,
+-      0xca, 0xd8, 0xbb, 0x34, 0xa9, 0x3b, 0xeb, 0x4c, 0xaa, 0x51, 0x13, 0x29,
+-      0x52, 0x34, 0xdc, 0x96, 0x05, 0x8e, 0xa6, 0x57, 0xe3, 0x9d, 0x3d, 0x26,
+-      0xf3, 0x54, 0x9d, 0xb8, 0xf5, 0xbd, 0x32, 0xc1, 0x80, 0x0e, 0xd3, 0xaa,
+-      0x57, 0x19, 0xfb, 0x3d, 0x2a, 0x16, 0xce, 0x8c, 0x86, 0xc6, 0x17, 0xb8,
+-      0xdc, 0x88, 0x64, 0x65, 0xfd, 0x53, 0x97, 0xb3, 0xc9, 0xb8, 0x2b, 0xe9,
+-      0x25, 0xff, 0xac, 0xc6, 0x6f, 0xc8, 0x83, 0x7f, 0x4d, 0xbe, 0x3b, 0xc1,
+-      0x78, 0x3e, 0x91, 0x29, 0x66, 0xbe, 0xe8, 0x91, 0x1c, 0x78, 0xdc, 0xc3,
+-      0xb9, 0x28, 0x6b, 0xf4, 0xe3, 0xdc, 0xb0, 0x17, 0x77, 0xec, 0x09, 0xee,
+-      0x9b, 0x50, 0xab, 0xf0, 0xc9, 0x70, 0x31, 0x96, 0x0f, 0x78, 0x29, 0x9b,
+-      0x8d, 0x5d, 0xc4, 0xff, 0x8f, 0xf8, 0xac, 0x65, 0x0f, 0x94, 0xcc, 0xdc,
+-      0x59, 0xe4, 0xec, 0x06, 0xeb, 0x97, 0x60, 0xd9, 0x80, 0xf0, 0x34, 0x15,
+-      0x1f, 0x0e, 0x2b, 0xf8, 0x20, 0x6d, 0x62, 0x21, 0xfb, 0xdb, 0x9c, 0x7a,
+-      0xc1, 0xf6, 0xd2, 0xcf, 0xd7, 0x64, 0x4c, 0x3c, 0x98, 0xd6, 0x19, 0x53,
+-      0xde, 0xb6, 0x5d, 0x46, 0x23, 0xde, 0xde, 0x6d, 0x9c, 0x78, 0xd7, 0x15,
+-      0x1a, 0x9f, 0xeb, 0x6a, 0xc4, 0x5b, 0x07, 0x1b, 0xf1, 0xb3, 0xfe, 0x05,
+-      0xb8, 0xb9, 0x31, 0x86, 0xf3, 0x73, 0x1b, 0xf1, 0xe6, 0x7e, 0x1d, 0x3b,
+-      0x52, 0xcd, 0xd0, 0x47, 0xc7, 0xc9, 0x4f, 0x23, 0xa8, 0x67, 0x4e, 0x65,
+-      0xf4, 0xdb, 0x5d, 0x25, 0xd1, 0x2e, 0xec, 0x34, 0xa3, 0x98, 0xb3, 0x5f,
+-      0xf4, 0x60, 0xdb, 0xeb, 0xe6, 0x46, 0xf1, 0x72, 0x9f, 0x41, 0x3f, 0x8d,
+-      0x52, 0x0f, 0x3a, 0x9e, 0x24, 0x36, 0x87, 0x9e, 0x30, 0x2e, 0x1c, 0xe0,
+-      0xef, 0x05, 0x07, 0x9a, 0xd1, 0xce, 0xfe, 0x13, 0xa9, 0x18, 0xf6, 0x8d,
+-      0x36, 0x70, 0xcc, 0x26, 0xc7, 0x5f, 0x63, 0xfd, 0x46, 0x69, 0x41, 0xdf,
+-      0x68, 0x2b, 0xf9, 0x66, 0x17, 0x79, 0x66, 0x2b, 0x7a, 0xd9, 0xd6, 0xd6,
+-      0x94, 0x89, 0x65, 0xc9, 0x56, 0x3c, 0x9d, 0x90, 0x33, 0x8d, 0x46, 0x64,
+-      0x9e, 0x22, 0xef, 0x7d, 0xb5, 0xe2, 0x10, 0x75, 0xb2, 0x70, 0x60, 0x39,
+-      0xed, 0xd0, 0x8b, 0x45, 0x7b, 0x74, 0x3c, 0x95, 0xba, 0x13, 0xef, 0x8c,
+-      0x98, 0x68, 0x4b, 0x8a, 0xbe, 0xe5, 0x5c, 0x4d, 0x1c, 0xc7, 0x19, 0x5b,
+-      0x7e, 0x33, 0x10, 0xfb, 0x1b, 0x4e, 0xf3, 0x49, 0x15, 0xc1, 0xce, 0x19,
+-      0x9c, 0xf0, 0x9b, 0x1a, 0xe5, 0x6c, 0x94, 0x8b, 0xa8, 0x16, 0xb4, 0xca,
+-      0x55, 0x4b, 0xe7, 0x7d, 0xcb, 0xad, 0x6e, 0xc2, 0x37, 0x06, 0xdc, 0xe4,
+-      0xf4, 0x2a, 0x73, 0x11, 0xab, 0x83, 0xb6, 0x61, 0x95, 0xa9, 0xb9, 0x79,
+-      0xdb, 0x2e, 0xef, 0xa1, 0x19, 0x2e, 0xec, 0x32, 0x6b, 0xda, 0x4a, 0x58,
+-      0x6f, 0x69, 0x38, 0x18, 0x2b, 0x52, 0x9b, 0x99, 0x27, 0x3e, 0x8e, 0x75,
+-      0x7b, 0x1e, 0xc7, 0x1a, 0x7e, 0x3a, 0xf6, 0xd8, 0x5d, 0x4b, 0x4c, 0x05,
+-      0x2f, 0x1a, 0x76, 0x57, 0x97, 0x69, 0x70, 0x6e, 0x65, 0x5e, 0x1f, 0x47,
+-      0xe7, 0xa1, 0xc7, 0xf1, 0x28, 0xed, 0xab, 0x92, 0x7e, 0xbc, 0x32, 0x69,
+-      0x77, 0xdd, 0xdc, 0x58, 0x87, 0x4f, 0x9d, 0xfc, 0x43, 0xec, 0x75, 0xab,
+-      0x93, 0x13, 0xa7, 0x55, 0xb9, 0xde, 0xed, 0x5c, 0x5b, 0xea, 0x2b, 0x65,
+-      0xf9, 0xd8, 0xf2, 0x5b, 0xb6, 0xfb, 0xbb, 0x3d, 0xe5, 0x78, 0xa2, 0x52,
+-      0xe2, 0x87, 0xac, 0xed, 0x42, 0x31, 0xe6, 0x32, 0xcf, 0x7a, 0xe2, 0x38,
+-      0xb6, 0x93, 0xb7, 0xf9, 0xc3, 0x92, 0x03, 0xd7, 0x9b, 0x5b, 0xd4, 0x5b,
+-      0x89, 0xed, 0x0a, 0x76, 0xd6, 0xf6, 0xa1, 0x97, 0xbe, 0xba, 0xab, 0x36,
+-      0x18, 0xef, 0x45, 0xd4, 0xde, 0x35, 0xbd, 0xe7, 0xdf, 0xf0, 0x5e, 0x96,
+-      0xbc, 0xb7, 0x9d, 0x7f, 0x37, 0xeb, 0x71, 0x74, 0xed, 0x91, 0xf9, 0x7f,
+-      0x1c, 0x8f, 0x51, 0xfe, 0xce, 0x81, 0xc7, 0xf1, 0x4d, 0xda, 0x4e, 0x45,
+-      0xd3, 0xd1, 0xc7, 0x2a, 0x30, 0xbb, 0xaf, 0x1c, 0xe3, 0x0f, 0x57, 0xca,
+-      0x39, 0x28, 0x62, 0x62, 0xaf, 0xf2, 0x38, 0xd6, 0x0f, 0x1d, 0xa0, 0x2f,
+-      0x3a, 0xfe, 0x47, 0x2c, 0xce, 0xc7, 0xab, 0x00, 0xd6, 0x11, 0x93, 0x73,
+-      0xb8, 0xee, 0xc7, 0x9a, 0xc4, 0x61, 0xc7, 0xf7, 0x0b, 0xa2, 0xab, 0xe8,
+-      0xf7, 0x6d, 0xf4, 0xfb, 0xe5, 0xf4, 0xfb, 0x56, 0xfa, 0x7d, 0x0b, 0xfd,
+-      0x3e, 0x46, 0xbf, 0x8f, 0xd2, 0xef, 0x23, 0xf4, 0xfb, 0x66, 0xfa, 0xbd,
+-      0x49, 0xbf, 0x87, 0x72, 0xa2, 0xf9, 0x38, 0x3c, 0xfd, 0x5e, 0xda, 0x50,
+-      0xee, 0x3d, 0x99, 0x83, 0xc4, 0x9f, 0xd3, 0xe6, 0x9c, 0xc0, 0x62, 0xc6,
+-      0xd5, 0x61, 0x62, 0x44, 0x7a, 0xe4, 0xaf, 0x9c, 0x77, 0x2a, 0xd2, 0xc4,
+-      0xfd, 0x57, 0xa8, 0x8f, 0xa5, 0xe1, 0x1a, 0xf3, 0x69, 0xc6, 0xb0, 0x5f,
+-      0x18, 0xf5, 0x3d, 0x7e, 0x96, 0xf9, 0x41, 0xaa, 0xbe, 0x6f, 0x1a, 0x0c,
+-      0xab, 0x51, 0xdd, 0x0a, 0xac, 0xf4, 0x73, 0xcc, 0x72, 0xde, 0x6e, 0x25,
+-      0x1e, 0x1b, 0x6c, 0xc3, 0x7f, 0x19, 0xd4, 0xa8, 0x8b, 0x9a, 0xf1, 0x5b,
+-      0x5d, 0xf8, 0x71, 0x00, 0x2e, 0xff, 0x35, 0xc0, 0xe7, 0x55, 0x98, 0x73,
+-      0x58, 0xde, 0xef, 0x4b, 0x57, 0xb9, 0x1a, 0x66, 0x42, 0x6c, 0x04, 0x44,
+-      0x6a, 0x17, 0x33, 0xc1, 0x39, 0xce, 0x3b, 0x40, 0xb1, 0x55, 0x82, 0xe9,
+-      0x45, 0xd8, 0x5a, 0xe7, 0xe0, 0xec, 0xb3, 0x72, 0x6e, 0xb0, 0x8a, 0x78,
+-      0xe4, 0x8b, 0xb6, 0x62, 0x5b, 0xaf, 0x75, 0x7f, 0x15, 0x96, 0xa3, 0xa7,
+-      0x37, 0xa7, 0x83, 0x87, 0xc3, 0x1a, 0xa9, 0x42, 0x48, 0x9f, 0xa3, 0xc0,
+-      0xdd, 0xd1, 0x1c, 0xc1, 0x83, 0x99, 0x04, 0xfa, 0x38, 0xc6, 0x0d, 0xf4,
+-      0xb3, 0x75, 0x7f, 0xfa, 0xdd, 0x4e, 0x7c, 0x33, 0xa1, 0xd3, 0xfe, 0x2f,
+-      0xda, 0xe9, 0x8a, 0x39, 0x7d, 0x55, 0x30, 0x3a, 0x57, 0xa8, 0xf3, 0x98,
+-      0xd3, 0x06, 0x8f, 0xc8, 0xc2, 0xf7, 0xf4, 0xa8, 0xd7, 0xaa, 0x20, 0x36,
+-      0xcf, 0x1a, 0x80, 0x32, 0x9c, 0x94, 0xf7, 0x20, 0xba, 0xf0, 0xff, 0x99,
+-      0x6d, 0x8e, 0xfd, 0x8c, 0xbb, 0x34, 0xcc, 0x4c, 0xca, 0x7d, 0x7b, 0xc1,
+-      0x67, 0x4d, 0xc1, 0x3a, 0xdd, 0xb5, 0x81, 0xf7, 0xab, 0xf1, 0x23, 0xc6,
+-      0xd9, 0xc0, 0xc0, 0x02, 0xa8, 0x4d, 0x5e, 0xdc, 0xdd, 0x50, 0x8a, 0xf8,
+-      0x4a, 0xe1, 0xa1, 0x92, 0xef, 0xbb, 0xa9, 0xcf, 0xff, 0x17, 0x0f, 0x99,
+-      0xcf, 0x61, 0xc2, 0x9f, 0x70, 0xf6, 0xdd, 0xd7, 0x99, 0x77, 0x28, 0x16,
+-      0xaf, 0xb7, 0xa5, 0x2c, 0x6c, 0x30, 0x99, 0x0b, 0xdd, 0x53, 0xc9, 0x9c,
+-      0x44, 0xca, 0x4b, 0xbb, 0x5b, 0x9d, 0xf6, 0x0e, 0xa6, 0xe4, 0x7a, 0xf7,
+-      0x64, 0x9f, 0x77, 0x01, 0x95, 0x5e, 0xe2, 0xad, 0x82, 0x33, 0xb5, 0x09,
+-      0xfa, 0x34, 0x7e, 0xec, 0x46, 0x4d, 0xba, 0x5f, 0x75, 0xfd, 0xf8, 0x1a,
+-      0xcc, 0x31, 0x7f, 0xaf, 0xca, 0x7c, 0xc4, 0xf0, 0x54, 0x48, 0x41, 0xa5,
+-      0x61, 0x9c, 0xff, 0x19, 0x7d, 0x6b, 0xc2, 0x95, 0xc0, 0x53, 0x63, 0xa7,
+-      0xec, 0xf1, 0x6b, 0xfc, 0x9c, 0x73, 0xa9, 0xdb, 0x86, 0x0f, 0x06, 0x65,
+-      0xce, 0x64, 0x9d, 0x9f, 0xb1, 0x5d, 0xd5, 0x51, 0xca, 0x7b, 0xa7, 0x87,
+-      0x4d, 0xe6, 0x3a, 0x6d, 0xf8, 0xc7, 0xc1, 0x95, 0xf8, 0xfd, 0x60, 0x4d,
+-      0xdb, 0x7f, 0x52, 0x6d, 0x7b, 0x69, 0xf8, 0x6b, 0xf8, 0x65, 0xa5, 0x86,
+-      0xa7, 0x69, 0x43, 0xbf, 0x4f, 0x58, 0x4b, 0xaf, 0x21, 0x16, 0xfc, 0xef,
+-      0x44, 0xf0, 0xc2, 0x49, 0x67, 0x5f, 0xa9, 0xde, 0xfc, 0xd0, 0x15, 0x8c,
+-      0x9f, 0x51, 0x83, 0xd6, 0x36, 0x65, 0x39, 0xec, 0x4c, 0x2b, 0xce, 0x67,
+-      0xa6, 0xda, 0x42, 0x97, 0x8d, 0x2a, 0xb1, 0x03, 0xb1, 0x07, 0xda, 0x22,
+-      0x73, 0xb9, 0x9f, 0x92, 0x47, 0x77, 0x7f, 0x95, 0xf6, 0x98, 0xa2, 0x3d,
+-      0xa6, 0x68, 0x8f, 0xc4, 0xa4, 0xe7, 0x89, 0x55, 0x3f, 0x48, 0xd1, 0x1e,
+-      0xe9, 0x3f, 0xcf, 0xd1, 0x7f, 0x72, 0x5c, 0xb9, 0xdd, 0x39, 0xb7, 0xf6,
+-      0x06, 0x63, 0x62, 0xe2, 0x09, 0x79, 0x27, 0xad, 0x66, 0x43, 0x16, 0xc1,
+-      0xf6, 0x5e, 0xe5, 0xb3, 0x72, 0x39, 0x67, 0xfb, 0xed, 0x90, 0xf8, 0x40,
+-      0x6e, 0x3f, 0xe0, 0xc8, 0xc8, 0x63, 0x65, 0xf2, 0x7e, 0xd4, 0xc1, 0xbd,
+-      0xff, 0x92, 0xce, 0xfe, 0x3b, 0xe5, 0x10, 0x7d, 0xfd, 0x5b, 0xc7, 0x2e,
+-      0xba, 0xfc, 0x1b, 0xfb, 0x97, 0x55, 0x32, 0xfe, 0x55, 0xf8, 0x62, 0xb0,
+-      0x05, 0xe7, 0x19, 0x7f, 0xdf, 0x6a, 0x1a, 0xef, 0x0c, 0x20, 0xd8, 0x51,
+-      0xae, 0x46, 0x91, 0xcd, 0xb4, 0xe0, 0xb3, 0x44, 0x14, 0x07, 0x12, 0x35,
+-      0xed, 0x35, 0xae, 0xb3, 0x6a, 0x7c, 0x86, 0x58, 0x54, 0x0c, 0x9f, 0x92,
+-      0x5f, 0x2e, 0xac, 0x8d, 0x60, 0x88, 0x6d, 0x7a, 0xa2, 0x1a, 0x46, 0x9a,
+-      0xc5, 0x56, 0x73, 0xef, 0x4e, 0xfd, 0xa9, 0xbf, 0x2e, 0xda, 0xe3, 0x7b,
+-      0x4d, 0x17, 0xed, 0x71, 0xcd, 0x6b, 0x69, 0xf4, 0xe1, 0xd2, 0x3d, 0xf2,
+-      0x6e, 0xa9, 0xf8, 0xb3, 0x82, 0x1f, 0x84, 0xc7, 0xdb, 0xa6, 0x21, 0xf8,
+-      0xec, 0x7d, 0xb4, 0xf5, 0x93, 0x49, 0x59, 0x53, 0x6c, 0xc1, 0xfb, 0x2c,
+-      0xef, 0xa6, 0x5f, 0x9c, 0xcc, 0xb8, 0xdd, 0xbf, 0x4c, 0x2a, 0xcc, 0x4b,
+-      0x97, 0xe3, 0x97, 0x99, 0x37, 0xd5, 0x8f, 0x35, 0x13, 0x67, 0xb2, 0x2b,
+-      0x69, 0x4f, 0x92, 0xff, 0xc7, 0x98, 0xff, 0x07, 0x3b, 0x8f, 0x60, 0x25,
+-      0xca, 0x0f, 0xad, 0x42, 0xd9, 0x1e, 0xe2, 0x67, 0x88, 0xf9, 0x3f, 0xaf,
+-      0x67, 0xec, 0x91, 0xf7, 0x0d, 0xca, 0xed, 0xed, 0xab, 0x44, 0x2f, 0x82,
+-      0x27, 0x7f, 0x57, 0x8e, 0xb2, 0x55, 0xc0, 0x21, 0xa9, 0x67, 0xb0, 0xde,
+-      0x4a, 0x54, 0xee, 0xa9, 0x89, 0x2c, 0x46, 0xcd, 0xf9, 0xdb, 0xd4, 0x95,
+-      0xb8, 0xfe, 0xd0, 0x3f, 0x73, 0x0e, 0xa4, 0x6c, 0x35, 0x9e, 0xa0, 0xdd,
+-      0x16, 0x92, 0x13, 0xb6, 0x24, 0x7f, 0x6d, 0xcf, 0xa4, 0x2f, 0x7e, 0xf6,
+-      0x15, 0x60, 0x5d, 0xd6, 0x60, 0xbc, 0x2b, 0x46, 0x7c, 0xe8, 0x29, 0xbb,
+-      0x3c, 0xea, 0xc6, 0x9a, 0x6c, 0x03, 0x16, 0x0f, 0xd8, 0xf6, 0xb9, 0xb9,
+-      0x31, 0xf8, 0xa2, 0x3e, 0x62, 0x98, 0x0f, 0x8f, 0x26, 0x4b, 0xf8, 0x2d,
+-      0xc7, 0x4f, 0x42, 0xe3, 0xb3, 0x55, 0x63, 0xc3, 0x0c, 0x97, 0xd1, 0x9e,
+-      0x55, 0x24, 0xee, 0xfb, 0xf0, 0x08, 0xe3, 0xf3, 0xd2, 0x64, 0x00, 0xf1,
+-      0xac, 0x6d, 0xbf, 0xd9, 0xec, 0xc7, 0xc3, 0xac, 0xdf, 0x9a, 0xec, 0x41,
+-      0x37, 0xed, 0x22, 0x7e, 0xc8, 0xd0, 0x35, 0xc6, 0xfb, 0x75, 0x59, 0x2f,
+-      0x63, 0x58, 0x25, 0x6e, 0x63, 0x2c, 0x7a, 0x54, 0xce, 0xca, 0xd0, 0x07,
+-      0xdf, 0x31, 0xad, 0x1b, 0x5c, 0x30, 0xd0, 0x99, 0xf5, 0x63, 0x79, 0x32,
+-      0x78, 0x41, 0xde, 0xcd, 0xfb, 0xcc, 0xac, 0xc3, 0xc6, 0x6c, 0x00, 0xb7,
+-      0x27, 0x8f, 0x3e, 0x3a, 0x13, 0xd6, 0x7f, 0x9e, 0x81, 0x06, 0x7c, 0x3d,
+-      0x5b, 0xcd, 0xf6, 0x83, 0x1b, 0xde, 0x50, 0xaa, 0xf1, 0x8d, 0x43, 0x26,
+-      0xdb, 0x57, 0xb1, 0x8c, 0xed, 0x2c, 0x49, 0x5e, 0x8f, 0x47, 0x0e, 0x35,
+-      0xe3, 0xc1, 0x6c, 0x13, 0x16, 0x31, 0x3e, 0x75, 0x30, 0x37, 0xc4, 0xbd,
+-      0xc0, 0xed, 0x03, 0xa2, 0x7b, 0x28, 0x6f, 0x36, 0x8f, 0x33, 0x5f, 0x36,
+-      0x41, 0x43, 0x74, 0xf6, 0x92, 0x77, 0xd2, 0x56, 0x6f, 0xdf, 0xdf, 0x84,
+-      0xa5, 0x03, 0x2a, 0x6a, 0xc2, 0x85, 0x88, 0xb7, 0x29, 0x68, 0x19, 0x90,
+-      0x38, 0x2b, 0xdc, 0xc6, 0x64, 0x5c, 0x0d, 0xb1, 0x0f, 0x93, 0x71, 0x35,
+-      0x77, 0xbf, 0x3b, 0x25, 0x6b, 0x0b, 0x6f, 0x93, 0x2f, 0x85, 0xd1, 0xe2,
+-      0xc4, 0x68, 0x59, 0x13, 0xb7, 0xe0, 0x66, 0xec, 0x0e, 0xd3, 0xc6, 0x17,
+-      0x34, 0x4a, 0xac, 0xd6, 0x9d, 0xbd, 0xa9, 0xb1, 0x7e, 0xa3, 0xe3, 0x82,
+-      0x42, 0xfb, 0xda, 0x2f, 0x31, 0xd1, 0x8f, 0x8d, 0xc9, 0x28, 0xde, 0xe9,
+-      0x63, 0xbc, 0xb9, 0x31, 0xb6, 0xb4, 0x04, 0x86, 0xf9, 0x08, 0x42, 0xd6,
+-      0x49, 0xc6, 0xf6, 0xf3, 0xe9, 0x4a, 0x2c, 0xde, 0x23, 0x65, 0x1a, 0xf1,
+-      0xee, 0xb0, 0xec, 0x4d, 0x6e, 0xc2, 0x53, 0x7d, 0x2e, 0x0c, 0x99, 0x35,
+-      0x3d, 0x2a, 0xe3, 0xe7, 0xfc, 0xc6, 0xa0, 0xf6, 0x23, 0x72, 0xd5, 0x0b,
+-      0x4d, 0x8c, 0xca, 0xd7, 0x34, 0xa3, 0x85, 0x72, 0xb5, 0x18, 0xe2, 0x93,
+-      0x16, 0x1e, 0x6c, 0xde, 0x84, 0x93, 0x7d, 0x86, 0xf5, 0xb4, 0xac, 0x03,
+-      0x34, 0xf2, 0xf9, 0x74, 0x37, 0x36, 0x1b, 0xc2, 0x69, 0x75, 0xfa, 0x16,
+-      0x59, 0xa7, 0xd1, 0x8c, 0x77, 0x68, 0xaf, 0x3d, 0xe9, 0x05, 0x8c, 0xfd,
+-      0x12, 0xf3, 0xbd, 0x56, 0x80, 0xf5, 0xca, 0xbf, 0xa2, 0xe0, 0xf4, 0x01,
+-      0xe1, 0x58, 0x0b, 0x70, 0xff, 0x80, 0xec, 0x0b, 0xa8, 0x98, 0x7f, 0x68,
+-      0x35, 0xce, 0xed, 0xce, 0x71, 0xae, 0x37, 0xc3, 0xd6, 0xd7, 0xc9, 0xb9,
+-      0xda, 0x4b, 0xc9, 0xb9, 0xc8, 0xe5, 0xea, 0x36, 0x2a, 0x6e, 0x84, 0xb2,
+-      0x11, 0xf2, 0x0a, 0xe1, 0x17, 0x01, 0x3c, 0x93, 0x69, 0xc6, 0x6d, 0xc9,
+-      0x6a, 0x8c, 0x90, 0x6f, 0xa5, 0x89, 0x17, 0xe9, 0x0c, 0xe3, 0xca, 0x70,
+-      0x15, 0x3f, 0x3a, 0x3f, 0xb3, 0xf8, 0x31, 0x9c, 0x7b, 0x6b, 0x68, 0xcb,
+-      0xb1, 0x36, 0xc5, 0xd9, 0xdb, 0x18, 0xca, 0x48, 0xac, 0x56, 0x98, 0xb7,
+-      0xde, 0xa5, 0x49, 0x6e, 0x2a, 0xe7, 0x0e, 0x7e, 0xde, 0xa7, 0xe3, 0x5b,
+-      0x8d, 0x3b, 0x95, 0x58, 0xa5, 0xf3, 0x5e, 0x92, 0x55, 0x4c, 0xd9, 0x6e,
+-      0x9b, 0x2b, 0x6b, 0x94, 0x62, 0x97, 0x6c, 0x83, 0x39, 0xfa, 0xc3, 0x66,
+-      0x05, 0xf4, 0x0a, 0x5d, 0xce, 0x50, 0xd2, 0xdf, 0xfd, 0x78, 0x35, 0x11,
+-      0x47, 0x26, 0x51, 0xdf, 0xb3, 0x51, 0x71, 0xc9, 0xd9, 0xf3, 0xba, 0xb8,
+-      0x22, 0x3e, 0x16, 0x87, 0x27, 0xe9, 0xb5, 0xca, 0x59, 0xff, 0x9d, 0xb9,
+-      0x1d, 0x8c, 0x07, 0xf5, 0x9c, 0x62, 0xd5, 0x39, 0x7f, 0x9e, 0x46, 0x07,
+-      0xd6, 0x25, 0x0c, 0xc6, 0xc0, 0xd5, 0x76, 0x37, 0xe7, 0xe1, 0x58, 0xa2,
+-      0x03, 0xf7, 0x27, 0xea, 0xc7, 0x9f, 0xa4, 0x6d, 0xe1, 0xee, 0x0e, 0xb4,
+-      0xf0, 0xd9, 0x50, 0xaa, 0xe6, 0x42, 0x37, 0x75, 0x3d, 0x31, 0xad, 0xce,
+-      0x59, 0x97, 0x77, 0x1b, 0x3a, 0xcb, 0xeb, 0xc4, 0xb3, 0xfa, 0xd8, 0x80,
+-      0xfa, 0xef, 0x15, 0x4c, 0x97, 0x5c, 0x32, 0x82, 0xe3, 0x09, 0x1f, 0xbe,
+-      0x9e, 0xb4, 0xe8, 0x03, 0xc0, 0xfa, 0x6c, 0x33, 0xf3, 0x88, 0xa7, 0xec,
+-      0x0a, 0x87, 0xeb, 0xba, 0x69, 0x83, 0x0b, 0x70, 0x82, 0xb1, 0xb7, 0x66,
+-      0x9e, 0xa1, 0x2d, 0x52, 0xe4, 0x7d, 0xeb, 0x5f, 0xdb, 0xee, 0x68, 0x09,
+-      0x36, 0x0c, 0x85, 0x22, 0x2b, 0x19, 0x67, 0x9f, 0x6a, 0x36, 0xc6, 0x6d,
+-      0xc6, 0xc0, 0x19, 0xd1, 0x04, 0xe7, 0x3a, 0x24, 0xff, 0xaf, 0x03, 0x7f,
+-      0x41, 0x3b, 0xff, 0x24, 0x21, 0x7e, 0x62, 0x10, 0x37, 0xfd, 0xf8, 0x06,
+-      0xed, 0xfc, 0x7c, 0xa2, 0x0e, 0x59, 0xfa, 0x65, 0x07, 0xfd, 0xe3, 0xdd,
+-      0x44, 0x30, 0x7e, 0x93, 0xca, 0x7c, 0x8f, 0xfe, 0xf1, 0x51, 0x22, 0x42,
+-      0xdf, 0xf9, 0x2a, 0x3f, 0x0d, 0xf4, 0x87, 0x3a, 0xd6, 0xd1, 0xe9, 0x07,
+-      0x7e, 0x9c, 0x65, 0xf9, 0x03, 0xa9, 0x9a, 0xd6, 0x15, 0x4a, 0x8d, 0x59,
+-      0xa3, 0x54, 0x30, 0x9f, 0xd5, 0x68, 0xff, 0xb7, 0xe0, 0x43, 0x59, 0x4f,
+-      0x4e, 0x12, 0x8b, 0x92, 0xe8, 0x2f, 0x22, 0x97, 0x5b, 0xe9, 0x9c, 0xe5,
+-      0xaf, 0x3f, 0xf1, 0xa9, 0x12, 0x1c, 0x3f, 0xe3, 0x0a, 0x76, 0xcc, 0x20,
+-      0x8f, 0xfe, 0x0b, 0xfa, 0xc1, 0x37, 0x59, 0xf6, 0x93, 0xbe, 0x62, 0x7c,
+-      0x63, 0x88, 0x31, 0x37, 0x55, 0x80, 0x82, 0x3d, 0x5e, 0x3c, 0x78, 0x48,
+-      0xc7, 0x3e, 0x27, 0x57, 0x17, 0x9d, 0x52, 0x77, 0xc4, 0x88, 0x73, 0x73,
+-      0x81, 0x19, 0x07, 0x56, 0xe3, 0xd4, 0x6e, 0x9d, 0x71, 0x2f, 0x67, 0x27,
+-      0xcf, 0x86, 0x1d, 0x6e, 0x1e, 0x17, 0x6e, 0x5e, 0xc0, 0x71, 0x6d, 0x4d,
+-      0x85, 0xda, 0xb7, 0x51, 0x17, 0xb7, 0x67, 0xc5, 0xfe, 0x22, 0x78, 0x8e,
+-      0x63, 0xeb, 0xa7, 0xad, 0x1c, 0x48, 0x54, 0x33, 0x47, 0xf7, 0xc1, 0xa2,
+-      0xad, 0x58, 0xf2, 0x0e, 0x13, 0x6d, 0xc5, 0xa2, 0xad, 0x58, 0xb4, 0x15,
+-      0x8b, 0xb6, 0x62, 0x65, 0x16, 0xe0, 0x99, 0x3e, 0x03, 0x23, 0xec, 0x73,
+-      0xe7, 0x30, 0x39, 0xbc, 0xf3, 0x3e, 0x50, 0x9d, 0xe4, 0x29, 0xca, 0xc4,
+-      0xdd, 0xb7, 0x60, 0xa8, 0xef, 0x56, 0x7e, 0x14, 0xb4, 0xd2, 0x66, 0x7a,
+-      0xd2, 0x62, 0x83, 0x22, 0x93, 0x17, 0xc3, 0x99, 0x9b, 0x2b, 0x51, 0x2c,
+-      0xf1, 0x5d, 0xc1, 0x0e, 0xe7, 0x7e, 0xde, 0xd6, 0xe4, 0x9e, 0x85, 0x9a,
+-      0x79, 0x9b, 0xf0, 0x48, 0x9f, 0x8a, 0xdb, 0xc2, 0xf2, 0x7f, 0x08, 0x9a,
+-      0x99, 0x0f, 0xc8, 0xfe, 0x7c, 0x82, 0xfe, 0x99, 0xb3, 0x15, 0x19, 0x53,
+-      0xa6, 0x7f, 0x13, 0x4e, 0xf4, 0x1b, 0x8c, 0x59, 0x26, 0x32, 0xe9, 0x04,
+-      0x7d, 0x42, 0xfc, 0xdc, 0xc0, 0x33, 0x6c, 0x6b, 0xf6, 0x80, 0x0b, 0x95,
+-      0x8d, 0x6e, 0x94, 0xd0, 0xdf, 0x6f, 0x4b, 0xd7, 0x04, 0xbe, 0xa5, 0x24,
+-      0x9c, 0xf5, 0xd7, 0x5d, 0x29, 0x8c, 0xcf, 0x34, 0x2a, 0xb1, 0x6f, 0xb0,
+-      0x11, 0x8f, 0xed, 0x76, 0xd1, 0x46, 0xed, 0x05, 0xe5, 0x4d, 0x46, 0xc7,
+-      0x02, 0x97, 0xe0, 0x45, 0x23, 0xbe, 0xc1, 0x1c, 0x60, 0x7d, 0x7f, 0xd0,
+-      0x7c, 0x05, 0x41, 0xf3, 0x24, 0x16, 0xe0, 0x59, 0x93, 0xb8, 0x39, 0xaf,
+-      0x11, 0x1b, 0xf7, 0x1b, 0xb4, 0x29, 0x37, 0xf3, 0x63, 0xf9, 0xbf, 0x37,
+-      0xba, 0xb3, 0xc6, 0xf3, 0x32, 0xe4, 0x9c, 0x43, 0xb3, 0xfc, 0x4f, 0x06,
+-      0xa5, 0x87, 0xf8, 0x34, 0xa3, 0xd7, 0xe0, 0xb8, 0x5f, 0xb0, 0x4b, 0x0d,
+-      0xf9, 0x7f, 0x1c, 0xc4, 0x11, 0x8e, 0xfb, 0xc2, 0xcd, 0x6f, 0xdb, 0x95,
+-      0x86, 0xc4, 0x50, 0xe2, 0x49, 0x5a, 0xfa, 0x8f, 0xed, 0x08, 0x10, 0x3b,
+-      0x3a, 0xfa, 0x8d, 0x78, 0x29, 0x63, 0xd8, 0x46, 0x07, 0x63, 0x04, 0x5f,
+-      0x8c, 0xb6, 0x6f, 0x21, 0xa4, 0xad, 0x20, 0xee, 0x9c, 0xe6, 0x58, 0x7a,
+-      0x52, 0x82, 0x51, 0x3a, 0x8a, 0x7a, 0x63, 0xb8, 0x81, 0x39, 0x63, 0x41,
+-      0x6f, 0x0b, 0x6a, 0x99, 0x3f, 0xba, 0x7b, 0x5b, 0x61, 0x30, 0x97, 0x9c,
+-      0xd9, 0xbb, 0x1c, 0x0b, 0xc6, 0xf2, 0x1c, 0x5a, 0xc7, 0x11, 0x67, 0xdd,
+-      0xea, 0x29, 0x78, 0xee, 0xd3, 0x69, 0x53, 0x72, 0xe6, 0xc5, 0x6b, 0x55,
+-      0x12, 0x37, 0xcf, 0x50, 0xd7, 0xed, 0x03, 0xab, 0xed, 0x81, 0x94, 0xf0,
+-      0xa6, 0x2e, 0x78, 0x9a, 0x24, 0xf7, 0xd1, 0x31, 0x46, 0x8e, 0x3c, 0xcc,
+-      0x1c, 0xec, 0x8d, 0xfd, 0xab, 0x71, 0xff, 0x9e, 0xcb, 0x39, 0x9b, 0xd9,
+-      0x64, 0xfd, 0x7b, 0xda, 0xc5, 0x86, 0x12, 0xda, 0x85, 0x97, 0x76, 0xb1,
+-      0x2b, 0x15, 0x32, 0x0f, 0xd3, 0x2e, 0x6a, 0x89, 0x21, 0x1d, 0xbd, 0x92,
+-      0xef, 0x38, 0xef, 0xed, 0x55, 0x78, 0x10, 0xc0, 0x9b, 0xb4, 0x8f, 0x8d,
+-      0xbd, 0x76, 0x97, 0x9b, 0xb1, 0xa7, 0xa7, 0xb9, 0x1a, 0xaf, 0x65, 0x6e,
+-      0xc5, 0xa3, 0xfd, 0xd5, 0x78, 0x85, 0xb6, 0xf3, 0x76, 0x02, 0xf3, 0x2b,
+-      0xa0, 0xce, 0xac, 0x60, 0xac, 0xbe, 0x4d, 0x09, 0xb5, 0x2e, 0x42, 0xfd,
+-      0xf8, 0xcb, 0x4a, 0xb0, 0x93, 0x9c, 0xe5, 0xc4, 0x05, 0x62, 0xff, 0xeb,
+-      0x19, 0x39, 0x77, 0xe7, 0xc3, 0x38, 0xed, 0x6a, 0x9c, 0xf5, 0xbe, 0xd1,
+-      0x5f, 0xc7, 0x79, 0xf3, 0xa0, 0xd0, 0xf0, 0xe3, 0x14, 0xb1, 0xb4, 0x63,
+-      0x37, 0xc6, 0x03, 0x86, 0x71, 0xa2, 0x55, 0xa9, 0xc2, 0x9b, 0xc3, 0xb7,
+-      0x62, 0x63, 0x7f, 0x50, 0x8f, 0xd1, 0x37, 0x5f, 0xe3, 0xb3, 0xf5, 0xbb,
+-      0x67, 0xe1, 0x38, 0x6d, 0x6f, 0x9c, 0xb6, 0xb7, 0xb6, 0x5f, 0xc5, 0x8b,
+-      0xc3, 0xb7, 0xb0, 0x5f, 0x05, 0xb3, 0x6a, 0x15, 0x27, 0xff, 0xda, 0x91,
+-      0x72, 0xfe, 0x77, 0x81, 0xf3, 0x8e, 0xde, 0x9c, 0x51, 0x13, 0xb3, 0xf7,
+-      0xcb, 0xf8, 0xc8, 0xc3, 0x9c, 0xb5, 0xe9, 0x46, 0xdc, 0xbc, 0xa7, 0x12,
+-      0xe7, 0xf6, 0x1a, 0x56, 0xb9, 0xcb, 0x5e, 0x70, 0x2a, 0x1c, 0xe2, 0x3c,
+-      0x34, 0xa2, 0xe1, 0x50, 0x23, 0x42, 0x03, 0xb9, 0x18, 0xa1, 0x19, 0x0b,
+-      0xf0, 0x3d, 0xce, 0xfb, 0x5a, 0xe6, 0x80, 0x35, 0x43, 0x82, 0xbd, 0x36,
+-      0x73, 0xc5, 0x66, 0x4c, 0x8c, 0x8d, 0x73, 0x6c, 0x11, 0x9c, 0x25, 0xbf,
+-      0x7d, 0x9f, 0x31, 0xe3, 0x43, 0xe6, 0x80, 0x1f, 0x3a, 0x31, 0x43, 0xde,
+-      0xa5, 0xbd, 0x32, 0x6e, 0xec, 0xe2, 0x9c, 0x6e, 0xec, 0x37, 0xea, 0xfa,
+-      0xf8, 0x7b, 0xbd, 0x33, 0xc7, 0x31, 0xe2, 0xb9, 0x60, 0x85, 0xe0, 0x7f,
+-      0x0b, 0x73, 0xde, 0x56, 0x9c, 0xed, 0x0b, 0x99, 0x0b, 0x95, 0x56, 0xbc,
+-      0x47, 0x99, 0xfb, 0x28, 0x5f, 0x92, 0xbc, 0x6c, 0x66, 0xd2, 0x18, 0xff,
+-      0xd0, 0x25, 0x18, 0xd3, 0x8a, 0xf2, 0xec, 0xad, 0x38, 0xd5, 0xbf, 0x1c,
+-      0xa5, 0x43, 0xc2, 0x35, 0xa5, 0x4d, 0x37, 0xb6, 0xee, 0xbe, 0x13, 0xeb,
+-      0x0f, 0xe6, 0x72, 0xbe, 0xf5, 0x89, 0x4d, 0xcc, 0x75, 0x85, 0xbf, 0xd7,
+-      0xe1, 0x50, 0x2a, 0x26, 0x47, 0x42, 0x77, 0x30, 0x9f, 0x8b, 0xac, 0x20,
+-      0x7e, 0x2e, 0x0d, 0x13, 0x63, 0x2b, 0x82, 0x81, 0x97, 0x61, 0xe9, 0xbc,
+-      0x17, 0x58, 0x07, 0xd1, 0x89, 0x85, 0x65, 0x8c, 0x3b, 0xb7, 0xf5, 0xbb,
+-      0x29, 0xbb, 0x3c, 0xaf, 0xc3, 0x8f, 0x52, 0x56, 0x5c, 0x9e, 0x6f, 0x84,
+-      0xf8, 0x8a, 0xe8, 0xc9, 0x05, 0xb3, 0xa9, 0x26, 0xd6, 0x41, 0x8c, 0x2e,
+-      0x0d, 0x07, 0xcd, 0x6f, 0xa0, 0x99, 0x73, 0x2f, 0x32, 0x47, 0xb0, 0xfe,
+-      0x10, 0x9c, 0x7d, 0x7f, 0x79, 0x47, 0xe4, 0x3f, 0xf4, 0xed, 0x76, 0xec,
+-      0x69, 0x7d, 0xe3, 0x65, 0x1b, 0x3c, 0x90, 0xaa, 0xef, 0x74, 0xa1, 0xc6,
+-      0x2a, 0x87, 0x91, 0xee, 0x23, 0x2f, 0x8d, 0x23, 0xd8, 0x13, 0x87, 0xc4,
+-      0x8c, 0x7a, 0x4b, 0x43, 0x35, 0xdb, 0x8e, 0xe0, 0xad, 0x84, 0x4b, 0xb0,
+-      0x09, 0xf2, 0x4f, 0x8a, 0x22, 0xc4, 0xe1, 0x37, 0x12, 0xc5, 0xd0, 0x87,
+-      0x12, 0xce, 0xff, 0x11, 0xba, 0x39, 0x6b, 0x91, 0xaf, 0x2d, 0xc0, 0xab,
+-      0xfd, 0x3e, 0xcc, 0x27, 0x4f, 0xa9, 0x4b, 0x3e, 0x65, 0x97, 0x12, 0x87,
+-      0xeb, 0x87, 0x42, 0x9a, 0x47, 0xb1, 0xed, 0x03, 0x73, 0x7f, 0x6d, 0x4f,
+-      0x8b, 0x4a, 0x59, 0x23, 0xb2, 0x48, 0xfe, 0x9f, 0xd4, 0x3c, 0xa3, 0xf5,
+-      0x2c, 0x7c, 0xb8, 0x81, 0x58, 0x7a, 0xac, 0xb7, 0x12, 0x6f, 0xed, 0xee,
+-      0x91, 0x35, 0x4b, 0x18, 0xfc, 0xfd, 0x5a, 0x6f, 0x00, 0x3a, 0xb1, 0x4c,
+-      0xe7, 0x75, 0x03, 0x31, 0x5a, 0x27, 0x3e, 0xbf, 0xdd, 0x6b, 0x2f, 0xf0,
+-      0x35, 0x59, 0x6c, 0xbd, 0x0e, 0x0b, 0x88, 0xd1, 0x6f, 0xf4, 0x06, 0x4f,
+-      0x2c, 0x51, 0x15, 0x94, 0x34, 0x99, 0xec, 0xdb, 0x87, 0x17, 0x69, 0xdf,
+-      0x4f, 0xa4, 0x8e, 0x7e, 0x6d, 0x06, 0xac, 0xfa, 0x12, 0x04, 0x37, 0x78,
+-      0x14, 0x59, 0xe3, 0x90, 0xd8, 0x56, 0x8d, 0x1b, 0xc9, 0x4d, 0x74, 0xe2,
+-      0x77, 0x4d, 0x56, 0xe2, 0x1c, 0xb0, 0x66, 0x68, 0x35, 0x3e, 0x1c, 0x14,
+-      0x1f, 0xc5, 0x42, 0xb1, 0xff, 0x05, 0xe1, 0x90, 0x79, 0x86, 0xb8, 0x5c,
+-      0x3b, 0x96, 0x20, 0xfe, 0xca, 0xb9, 0x3c, 0x8c, 0xab, 0xc4, 0x81, 0xca,
+-      0x94, 0x60, 0x57, 0x00, 0x8d, 0xcc, 0xf7, 0xca, 0x53, 0xe2, 0x93, 0x96,
+-      0x9c, 0x1b, 0xc1, 0xcd, 0x63, 0x3e, 0xe8, 0x63, 0x1a, 0x3f, 0x7e, 0xe8,
+-      0x23, 0x55, 0xfc, 0x50, 0xd6, 0x91, 0x59, 0xfc, 0x50, 0x56, 0xc6, 0x31,
+-      0x73, 0x44, 0xc1, 0x4d, 0x8e, 0x6d, 0x89, 0x0f, 0x7a, 0xf1, 0xec, 0x28,
+-      0xb0, 0xa1, 0xdf, 0xc4, 0xe1, 0xfd, 0x39, 0x9c, 0xdb, 0xcc, 0x3e, 0x42,
+-      0x03, 0x61, 0xac, 0x4f, 0x8b, 0x7d, 0x36, 0xe2, 0xb7, 0x7b, 0x8d, 0xb6,
+-      0x35, 0x6a, 0x28, 0xb2, 0x9c, 0x18, 0xf6, 0xfe, 0x48, 0x23, 0x3e, 0x7c,
+-      0x62, 0x01, 0x8c, 0x70, 0x23, 0xce, 0x1c, 0xd8, 0x84, 0xf2, 0x27, 0x54,
+-      0xe2, 0x8f, 0x8a, 0xf1, 0xe9, 0x82, 0xed, 0x82, 0xa3, 0x5e, 0xab, 0x8c,
+-      0xb8, 0xb5, 0x8d, 0xb8, 0xf5, 0xb3, 0xb9, 0xe3, 0x98, 0x9f, 0x94, 0x73,
+-      0xad, 0xcc, 0xaf, 0xd4, 0x08, 0x9e, 0x24, 0x6e, 0xed, 0xea, 0x93, 0xf9,
+-      0xe2, 0xdc, 0x12, 0xb3, 0xb6, 0xa6, 0x73, 0x9c, 0xe8, 0x70, 0xbf, 0xa1,
+-      0xb9, 0x68, 0xcb, 0x43, 0x93, 0x78, 0xf5, 0x5b, 0xc6, 0xff, 0x47, 0xe6,
+-      0x45, 0x71, 0x36, 0x2d, 0x7e, 0x25, 0x71, 0x45, 0xc7, 0x87, 0xb4, 0xf1,
+-      0xa5, 0xd4, 0xf5, 0x19, 0xe6, 0x16, 0x2d, 0x8c, 0x73, 0x1f, 0xd3, 0x9e,
+-      0x97, 0x93, 0x3f, 0xbe, 0x97, 0x12, 0x1b, 0x59, 0x8e, 0x25, 0x59, 0xb1,
+-      0x05, 0x67, 0x9d, 0x95, 0xdf, 0x31, 0x9c, 0x4e, 0xfc, 0xb1, 0xb8, 0xb0,
+-      0x12, 0xaf, 0x0e, 0xca, 0x79, 0x17, 0x03, 0xde, 0xde, 0xa0, 0x56, 0xa2,
+-      0xc8, 0x9e, 0x6e, 0x9e, 0xfb, 0x4e, 0x38, 0x39, 0x76, 0x69, 0x34, 0xbf,
+-      0xbf, 0x98, 0xdf, 0x77, 0xb0, 0xf0, 0xfd, 0xb9, 0x01, 0xf2, 0x4f, 0x28,
+-      0x87, 0xe7, 0x16, 0xe0, 0xf6, 0x3d, 0x6d, 0x18, 0xd9, 0xfd, 0x31, 0x8a,
+-      0xfa, 0xd5, 0x7b, 0x7d, 0xa8, 0xa9, 0x7b, 0x48, 0xe9, 0xc2, 0xa2, 0xb0,
+-      0xbc, 0xe7, 0x23, 0x6b, 0xe6, 0x7d, 0xd8, 0x7c, 0x80, 0x79, 0xcc, 0xd8,
+-      0x75, 0x38, 0xaa, 0x31, 0x1e, 0x9a, 0x1f, 0xa3, 0xa0, 0xdf, 0xe3, 0x9c,
+-      0x05, 0x3c, 0x6a, 0x36, 0x61, 0xe5, 0xe4, 0x59, 0x40, 0x54, 0x5d, 0xbd,
+-      0x97, 0x00, 0x5f, 0xe9, 0xe4, 0xff, 0x1f, 0xc8, 0xbd, 0xdb, 0x63, 0xa0,
+-      0x77, 0xf4, 0x7f, 0x95, 0xe7, 0xce, 0x06, 0xfd, 0x6b, 0xca, 0x76, 0xa2,
+-      0x7d, 0xcf, 0xe3, 0x58, 0xb1, 0xe7, 0x3b, 0xb8, 0x73, 0xa0, 0xb6, 0x33,
+-      0xc2, 0x5c, 0xe7, 0x83, 0xf0, 0x38, 0x8e, 0x85, 0x8b, 0x60, 0xf9, 0xc9,
+-      0xb1, 0x6e, 0xfc, 0x8a, 0xbc, 0x4e, 0xca, 0xbf, 0xd3, 0xb6, 0x7e, 0xaf,
+-      0xb4, 0xf7, 0xf6, 0xa4, 0x7f, 0xfd, 0x7c, 0x9a, 0x9c, 0xa7, 0x79, 0x21,
+-      0xf5, 0x2b, 0x5b, 0x77, 0x9e, 0xe7, 0xef, 0xbf, 0x65, 0xc7, 0xfc, 0x72,
+-      0x7f, 0xd6, 0x64, 0xbd, 0xef, 0xe0, 0x01, 0xe6, 0xbf, 0xa7, 0x9b, 0xbe,
+-      0x83, 0x85, 0x43, 0x97, 0xea, 0xa0, 0x68, 0xf7, 0x3a, 0x07, 0xbb, 0xe9,
+-      0x61, 0xe4, 0x48, 0xb2, 0x57, 0x25, 0xfb, 0x27, 0x7f, 0x89, 0xcd, 0x7b,
+-      0x65, 0x6d, 0xd3, 0xb6, 0xd7, 0x1b, 0xb2, 0xc7, 0x97, 0x3f, 0x37, 0x27,
+-      0xed, 0x58, 0x8a, 0x95, 0x91, 0xba, 0x5b, 0x94, 0xbe, 0xcc, 0xd4, 0x31,
+-      0x4d, 0x93, 0xff, 0x97, 0xa7, 0x95, 0x44, 0xa7, 0x8e, 0xad, 0x47, 0xd9,
+-      0x9e, 0x39, 0xa2, 0xec, 0xca, 0x5c, 0xad, 0x8f, 0xe7, 0xec, 0x58, 0x9b,
+-      0xb4, 0x21, 0x32, 0xc1, 0x8f, 0x62, 0x91, 0x2b, 0xff, 0xec, 0x99, 0x49,
+-      0xb9, 0x0b, 0xa1, 0x57, 0xe6, 0xe4, 0xbe, 0x9f, 0x72, 0x9b, 0x4d, 0x31,
+-      0xa8, 0xf3, 0xa6, 0xca, 0x9e, 0x1f, 0xe7, 0x7f, 0xbb, 0xd4, 0x56, 0xae,
+-      0xdc, 0xcd, 0x7e, 0xb1, 0x21, 0x75, 0xde, 0xd4, 0x35, 0xfb, 0x02, 0xe2,
+-      0x47, 0x48, 0xdb, 0x8a, 0x5c, 0xbe, 0xb7, 0xe6, 0xca, 0x7c, 0x4f, 0xb0,
+-      0x0b, 0x23, 0x09, 0x0d, 0xef, 0x99, 0x92, 0xdf, 0xc9, 0xad, 0x28, 0xbe,
+-      0xc7, 0xfc, 0xf1, 0x99, 0x44, 0xb0, 0x75, 0x9d, 0x52, 0x1f, 0x9b, 0xc3,
+-      0x38, 0x87, 0x0a, 0x59, 0x4f, 0x8f, 0x38, 0xff, 0xaf, 0x2a, 0x13, 0x8a,
+-      0x20, 0x43, 0x7f, 0x78, 0x23, 0x11, 0xec, 0x38, 0xa3, 0xe4, 0xfe, 0x0f,
+-      0xd6, 0xeb, 0xce, 0xfb, 0x1c, 0x79, 0xbb, 0x13, 0xce, 0x39, 0x75, 0x3d,
+-      0x57, 0x6c, 0x30, 0xd8, 0x97, 0x46, 0xa5, 0xac, 0x9b, 0x58, 0x16, 0xf3,
+-      0xa1, 0xee, 0x94, 0x15, 0x50, 0xf1, 0x15, 0xc4, 0xfd, 0xb2, 0x47, 0x72,
+-      0xcb, 0xe4, 0xff, 0xa9, 0x11, 0x7e, 0xf4, 0x2f, 0xaf, 0x4f, 0xc9, 0xff,
+-      0x06, 0xca, 0xdb, 0x8b, 0x35, 0x76, 0x3d, 0xd2, 0x9a, 0xac, 0x7d, 0xc0,
+-      0x9a, 0x46, 0x5d, 0xfb, 0x8d, 0x4d, 0x1c, 0xb7, 0x07, 0xd3, 0x99, 0xdb,
+-      0x85, 0x6b, 0xeb, 0xdb, 0x1a, 0xd5, 0x6b, 0x10, 0xab, 0x08, 0x6a, 0x31,
+-      0x72, 0xcd, 0x1e, 0xe7, 0xff, 0xed, 0xc8, 0xb9, 0x14, 0xab, 0xd5, 0x4b,
+-      0x4c, 0x6f, 0x52, 0x14, 0x14, 0x84, 0xe0, 0x7e, 0x28, 0xe3, 0x86, 0x56,
+-      0xfb, 0x5b, 0xfb, 0x17, 0x7e, 0x03, 0xdb, 0xc6, 0x6e, 0xb9, 0xf4, 0xff,
+-      0x87, 0xfe, 0x63, 0xf6, 0xea, 0xec, 0x37, 0xdf, 0xe6, 0xc7, 0x76, 0x6c,
+-      0xba, 0xf4, 0x2d, 0xed, 0xfe, 0x31, 0x59, 0xf3, 0xef, 0x7a, 0xd4, 0xe8,
+-      0x2e, 0x94, 0x63, 0xab, 0xb9, 0xde, 0x2f, 0x67, 0xe5, 0xd6, 0x43, 0xf6,
+-      0xff, 0x65, 0x0e, 0xe4, 0x1d, 0xc3, 0x08, 0xf3, 0x6e, 0xd1, 0x4b, 0x14,
+-      0x0f, 0x66, 0xe4, 0x9d, 0xa0, 0x59, 0x90, 0xff, 0xfb, 0xf5, 0x60, 0x26,
+-      0xa7, 0xbf, 0x47, 0x33, 0x3e, 0xe6, 0x00, 0x3e, 0xda, 0x60, 0x07, 0xf9,
+-      0x0b, 0xf9, 0xd3, 0x25, 0x5d, 0xde, 0xeb, 0x97, 0x75, 0x85, 0xef, 0xd3,
+-      0xa7, 0xdd, 0xb5, 0x72, 0x6d, 0xc9, 0xb9, 0x51, 0x25, 0x77, 0x7d, 0xde,
+-      0x79, 0x37, 0x52, 0x8d, 0xae, 0xc3, 0xc2, 0xc4, 0x34, 0x39, 0x3f, 0x29,
+-      0x6b, 0x36, 0x96, 0x3f, 0x2a, 0xef, 0x61, 0xf8, 0x88, 0xb1, 0x5f, 0xf5,
+-      0x4f, 0xbe, 0x73, 0xd5, 0xba, 0x82, 0x38, 0x36, 0x27, 0x6c, 0xc4, 0x9a,
+-      0x94, 0xa0, 0xbe, 0x52, 0x69, 0x63, 0xbd, 0x3a, 0xf4, 0x64, 0xa5, 0x0d,
+-      0xc5, 0xf9, 0xdf, 0x92, 0x1e, 0xb6, 0x71, 0x30, 0x51, 0xaf, 0x7b, 0xd4,
+-      0x4f, 0x6d, 0xcb, 0x39, 0x03, 0x29, 0xfb, 0xf6, 0x71, 0xbc, 0x94, 0x98,
+-      0x4e, 0x94, 0xba, 0xba, 0xdd, 0x4b, 0xeb, 0xe7, 0x7f, 0xa3, 0x21, 0xc6,
+-      0xb6, 0x82, 0x9d, 0x61, 0x57, 0x70, 0xc3, 0x05, 0xe2, 0x4a, 0x36, 0x6c,
+-      0xc4, 0x7f, 0xc0, 0x3e, 0xfe, 0x56, 0xa9, 0x43, 0x62, 0x4a, 0xfb, 0xb9,
+-      0xb6, 0xea, 0xdb, 0x0b, 0xd4, 0xf3, 0xce, 0xbb, 0xf8, 0xd2, 0xbe, 0x16,
+-      0x5d, 0x0d, 0x2d, 0x69, 0xd9, 0x7e, 0xb6, 0x39, 0x33, 0x1a, 0xdc, 0x57,
+-      0x41, 0x30, 0xfa, 0xb6, 0xda, 0x85, 0x35, 0x72, 0x3c, 0x24, 0x1a, 0xd4,
+-      0x1f, 0xa0, 0x7d, 0x34, 0x3a, 0x6d, 0xc4, 0xea, 0x0a, 0x20, 0x9c, 0xf2,
+-      0x4b, 0xed, 0x84, 0x39, 0x81, 0x70, 0x31, 0x96, 0x73, 0xce, 0x03, 0xc8,
+-      0xb9, 0x49, 0xe6, 0x0d, 0x09, 0xf9, 0xbf, 0x7d, 0x4e, 0x37, 0x93, 0x7b,
+-      0x5a, 0xcc, 0xd7, 0x19, 0xaf, 0xd7, 0xcb, 0xff, 0x48, 0x2a, 0xf6, 0xe1,
+-      0xc1, 0x84, 0xac, 0x81, 0xfc, 0x1f, 0x05, 0x3f, 0x96, 0xb4, 0x1c, 0x54,
+-      0x00, 0x00, 0x00 };
++      0xad, 0xbc, 0x0b, 0x74, 0x1c, 0xd5, 0x95, 0x2e, 0xfc, 0x55, 0x75, 0xb7,
++      0xd4, 0x92, 0xda, 0x52, 0x4b, 0x6e, 0xcb, 0x6d, 0xd0, 0xe0, 0x6a, 0xab,
++      0xda, 0x6a, 0x2c, 0x01, 0xd5, 0xb2, 0x0c, 0x4d, 0xa6, 0xc0, 0x1d, 0x5b,
++      0x80, 0x0c, 0x26, 0x11, 0xc6, 0xb9, 0x23, 0xe6, 0x7a, 0xfe, 0xf4, 0x18,
++      0x03, 0x86, 0x90, 0x5c, 0x33, 0x93, 0x9b, 0x71, 0xb8, 0x9e, 0xeb, 0x8a,
++      0xe4, 0x87, 0xc0, 0xa5, 0xee, 0x96, 0x90, 0x1f, 0xac, 0x35, 0xeb, 0xa7,
++      0x2d, 0xcb, 0x92, 0x21, 0xad, 0x16, 0x49, 0x98, 0x19, 0xe7, 0xe6, 0x81,
++      0xc6, 0xd8, 0x60, 0x93, 0xf0, 0xc8, 0x6b, 0xfd, 0x4c, 0xfe, 0xb9, 0x7f,
++      0x3c, 0xb6, 0x79, 0x83, 0xe3, 0x3c, 0x47, 0x9e, 0xc1, 0xa9, 0xff, 0xdb,
++      0xd5, 0xdd, 0xb6, 0xec, 0x40, 0x1e, 0xeb, 0x8e, 0xd6, 0xaa, 0xa5, 0xee,
++      0xaa, 0x73, 0xf6, 0x39, 0x67, 0x9f, 0xbd, 0xbf, 0xfd, 0xed, 0x73, 0x4e,
++      0xb5, 0x06, 0x54, 0xa3, 0xf4, 0x37, 0x8b, 0xd7, 0xd5, 0x1d, 0x1b, 0xee,
++      0x5e, 0xdc, 0x7e, 0x75, 0x87, 0x7c, 0xf7, 0xce, 0xf5, 0x7a, 0xf1, 0x61,
++      0x7f, 0x26, 0x12, 0x97, 0xde, 0xd2, 0x3e, 0xb4, 0xe0, 0x47, 0xfc, 0x25,
++      0x10, 0x91, 0x7f, 0xad, 0xa5, 0xaf, 0x1e, 0x20, 0x58, 0x6e, 0x5f, 0x2e,
++      0xf8, 0x55, 0xb3, 0xf3, 0xbf, 0x2e, 0xd3, 0xe1, 0xf7, 0x98, 0x9f, 0xff,
++      0x8b, 0xbb, 0x75, 0x20, 0x99, 0x6f, 0xd5, 0x96, 0xe3, 0x9c, 0x63, 0x85,
++      0xbc, 0x90, 0xfb, 0x7f, 0x62, 0x7e, 0xf0, 0xc4, 0xb7, 0xae, 0x8b, 0x9c,
++      0xc9, 0x79, 0xe0, 0x0f, 0x9a, 0x16, 0x82, 0x0b, 0xe1, 0x6f, 0x62, 0x9d,
++      0xbf, 0x6b, 0xd9, 0xa6, 0xa2, 0xb6, 0x2c, 0x2b, 0x12, 0xce, 0x21, 0x12,
++      0xb4, 0x10, 0x89, 0x59, 0x40, 0xca, 0x6b, 0x22, 0x55, 0x69, 0xfa, 0x51,
++      0xa1, 0x57, 0x20, 0x15, 0xdc, 0xa8, 0x6d, 0xe1, 0x18, 0x97, 0xd9, 0x7e,
++      0xed, 0x44, 0x1e, 0xb8, 0xdb, 0xf6, 0xe3, 0xb8, 0x27, 0xa0, 0x9d, 0xcc,
++      0xef, 0xab, 0x2b, 0xea, 0x23, 0x09, 0x8f, 0x8e, 0x94, 0x6a, 0xca, 0x7d,
++      0x68, 0xcb, 0xf3, 0x48, 0xf9, 0xcc, 0xcf, 0x6b, 0xe3, 0x36, 0xd0, 0x9b,
++      0x69, 0x36, 0x4e, 0xa0, 0x35, 0x7c, 0x18, 0x95, 0x48, 0x85, 0x22, 0x31,
++      0xe0, 0x83, 0x73, 0x8f, 0x66, 0x14, 0xf8, 0xf4, 0xd9, 0xe8, 0xdc, 0x0b,
++      0x3c, 0x92, 0x89, 0x24, 0x75, 0x05, 0xe8, 0x9f, 0x94, 0xba, 0x91, 0x60,
++      0x8e, 0xcf, 0xb7, 0x64, 0x80, 0xad, 0x99, 0xd9, 0xd8, 0x96, 0x75, 0xf0,
++      0x9c, 0xd1, 0x1c, 0xdc, 0xc7, 0x16, 0x7a, 0xdd, 0xe7, 0xb3, 0x61, 0xe5,
++      0xe4, 0xf9, 0x5b, 0xce, 0xb7, 0x5a, 0x82, 0x78, 0x7a, 0x32, 0x84, 0x67,
++      0x27, 0xeb, 0xf1, 0x48, 0xb6, 0x1e, 0xdb, 0xb3, 0x31, 0xa8, 0xba, 0x83,
++      0x58, 0x3c, 0x86, 0x8a, 0xeb, 0x1d, 0x9c, 0x34, 0xda, 0xb0, 0x95, 0x82,
++      0x5f, 0x6d, 0x6b, 0xc4, 0xda, 0x60, 0x13, 0xb6, 0xe8, 0xd7, 0xa1, 0x38,
++      0xd6, 0x0f, 0xce, 0x65, 0x32, 0xd2, 0x3f, 0xaf, 0xaa, 0xea, 0x37, 0xe2,
++      0xf4, 0x4e, 0x13, 0xef, 0xef, 0xc4, 0x9a, 0x5a, 0x38, 0x4e, 0x3e, 0x1e,
++      0xed, 0x7e, 0x50, 0x09, 0x6a, 0x4f, 0xe5, 0xd9, 0xa1, 0x55, 0x5e, 0xca,
++      0x83, 0x36, 0x92, 0x9f, 0x39, 0x15, 0x6c, 0x2f, 0xc3, 0x76, 0x33, 0xd2,
++      0x97, 0x30, 0xbe, 0xd5, 0xf2, 0xdf, 0x68, 0x0f, 0xc5, 0x31, 0x6d, 0xcd,
++      0xbc, 0xc6, 0x3e, 0x69, 0xec, 0x4f, 0x13, 0xbe, 0x36, 0x19, 0xc6, 0x57,
++      0xd9, 0xb7, 0xaf, 0x4c, 0x4a, 0x1f, 0x23, 0x7b, 0x2c, 0xd4, 0x63, 0x34,
++      0xdb, 0x84, 0xa7, 0xf5, 0x36, 0x7c, 0x85, 0x7d, 0xec, 0x33, 0x62, 0x58,
++      0x9b, 0xb8, 0x8b, 0xfd, 0x51, 0xb0, 0xaa, 0xed, 0x2f, 0x4b, 0xfd, 0x8a,
++      0x68, 0x50, 0x55, 0x24, 0x1b, 0x22, 0x31, 0x4d, 0x15, 0x99, 0x17, 0xfa,
++      0x3b, 0x90, 0x81, 0xe5, 0x37, 0xa5, 0xcf, 0x37, 0x22, 0xcf, 0xfe, 0x7e,
++      0x79, 0x67, 0xd4, 0x58, 0xaf, 0x62, 0x65, 0x80, 0x7d, 0x7e, 0x20, 0x1e,
++      0x4d, 0x2c, 0x62, 0x9f, 0xc7, 0xf3, 0x2a, 0xc7, 0x13, 0xd2, 0xc6, 0xd8,
++      0xf7, 0xe4, 0x2a, 0x95, 0x7d, 0x67, 0x5f, 0x32, 0xec, 0x4b, 0x86, 0x7d,
++      0xc9, 0xb0, 0x2f, 0x6e, 0xbf, 0x63, 0xec, 0x73, 0x71, 0x8e, 0x46, 0xf2,
++      0xc7, 0xd9, 0xdf, 0x99, 0xfd, 0x6c, 0x62, 0xdf, 0x91, 0xaa, 0xe7, 0xbc,
++      0x35, 0xa7, 0x65, 0xde, 0x1c, 0xe7, 0x55, 0xc3, 0x71, 0x7e, 0x6e, 0x04,
++      0xa8, 0xbf, 0x0c, 0xed, 0xa0, 0xdc, 0x9f, 0xf9, 0x56, 0x85, 0x89, 0x4e,
++      0x9a, 0xa0, 0x73, 0xa4, 0x23, 0x9a, 0x68, 0x50, 0x54, 0x78, 0xf5, 0xa0,
++      0xd6, 0x52, 0x88, 0x18, 0xd4, 0x8f, 0x16, 0x2d, 0x40, 0xd3, 0x0b, 0x94,
++      0x75, 0x51, 0xbb, 0x91, 0xe0, 0x14, 0xa4, 0x5d, 0x8d, 0xed, 0x1f, 0x2f,
++      0xcd, 0x9d, 0xc8, 0x0f, 0xb3, 0x4d, 0x69, 0x5f, 0x64, 0x3b, 0xce, 0xcf,
++      0x0c, 0xe8, 0x41, 0x44, 0xad, 0x41, 0xda, 0x9f, 0xc7, 0x0c, 0x6a, 0x1b,
++      0xf2, 0x7c, 0x7e, 0x5e, 0x46, 0x71, 0x3e, 0xd6, 0xe6, 0xb5, 0xd2, 0x18,
++      0x22, 0xec, 0x82, 0xd8, 0x41, 0x38, 0x15, 0x30, 0x83, 0xd2, 0xf7, 0xee,
++      0x3d, 0x03, 0x9b, 0x9d, 0x79, 0xba, 0xe8, 0x4a, 0xdf, 0x38, 0xcf, 0x13,
++      0x48, 0x9c, 0x5e, 0xf2, 0x90, 0x35, 0xab, 0x23, 0x8e, 0x6a, 0x1d, 0x81,
++      0x2a, 0x1d, 0xdd, 0xe9, 0x89, 0x6a, 0xab, 0xc6, 0xfc, 0xe6, 0x9d, 0x03,
++      0x13, 0x7e, 0x54, 0x4f, 0xe8, 0xa8, 0x9a, 0x78, 0xdc, 0x8b, 0x5a, 0x03,
++      0x3b, 0x26, 0xff, 0xcc, 0x5b, 0x1c, 0xdb, 0xcd, 0xa5, 0x31, 0xba, 0xb6,
++      0xef, 0x7f, 0xdd, 0x3e, 0xe3, 0x54, 0xe8, 0x55, 0x7f, 0xe6, 0x31, 0x75,
++      0x6d, 0x0c, 0x38, 0xb3, 0xb6, 0x63, 0x39, 0x7a, 0x83, 0x0a, 0xe6, 0xeb,
++      0x7f, 0x32, 0x0b, 0xb5, 0x26, 0xac, 0xc9, 0xc6, 0x54, 0x85, 0x19, 0x4a,
++      0x71, 0x6e, 0xf0, 0x82, 0x9d, 0x83, 0x6f, 0xc0, 0x71, 0xa4, 0xec, 0x49,
++      0xdc, 0x79, 0xa7, 0x6a, 0x1e, 0xba, 0xc6, 0x87, 0x4e, 0x96, 0xc7, 0xa6,
++      0xa3, 0x1d, 0x3f, 0x57, 0xd4, 0x9d, 0xdd, 0xb0, 0xc6, 0x3d, 0x48, 0x06,
++      0x53, 0xfc, 0x7f, 0xc5, 0x15, 0x2b, 0x13, 0xdd, 0xb0, 0xc7, 0xa7, 0x79,
++      0xdf, 0xcb, 0x7b, 0x26, 0xd2, 0x99, 0x2b, 0xae, 0xb8, 0x3d, 0x91, 0xc2,
++      0xc0, 0xb8, 0x7c, 0xf6, 0x62, 0xaa, 0x3e, 0x85, 0xed, 0xbb, 0x35, 0xd4,
++      0xe9, 0xdd, 0xc8, 0x8c, 0xcb, 0x67, 0xc7, 0x39, 0x65, 0x7c, 0x09, 0x7b,
++      0xda, 0xe8, 0xff, 0x73, 0xbb, 0xb1, 0x6d, 0xb7, 0x85, 0x4a, 0xdd, 0xa2,
++      0xee, 0x15, 0xef, 0x3f, 0xb7, 0x29, 0xd0, 0xee, 0x84, 0xb7, 0x42, 0x17,
++      0xbd, 0x25, 0xbc, 0xf7, 0xd8, 0x66, 0x70, 0xbe, 0xee, 0x38, 0x23, 0xc6,
++      0x22, 0x7c, 0xba, 0x7b, 0x2d, 0xac, 0x7d, 0x01, 0x58, 0xab, 0xe5, 0x7f,
++      0x37, 0x75, 0xb8, 0x16, 0xbd, 0xfb, 0xd6, 0xa2, 0xff, 0x31, 0x3a, 0x6e,
++      0x7d, 0xd0, 0x9d, 0xa7, 0x6f, 0xb5, 0x48, 0x9f, 0xa4, 0x7f, 0x3d, 0xbc,
++      0x44, 0xb7, 0x5f, 0xe0, 0x7f, 0x29, 0x33, 0xed, 0x60, 0xce, 0x85, 0x32,
++      0xdb, 0x59, 0x66, 0xdb, 0x45, 0x65, 0x4c, 0x3c, 0x31, 0x29, 0xba, 0x10,
++      0x95, 0xfd, 0x3e, 0x5d, 0x7c, 0xdb, 0xe9, 0x0d, 0x89, 0x2e, 0xac, 0x1e,
++      0x1f, 0x22, 0xdd, 0xf7, 0x2a, 0x5e, 0xac, 0x18, 0x00, 0xeb, 0xd0, 0x09,
++      0xaa, 0x23, 0xc9, 0x85, 0x8a, 0x89, 0xea, 0x01, 0x05, 0x2b, 0xe2, 0x55,
++      0xd0, 0xea, 0x45, 0xde, 0x8f, 0x1c, 0x2b, 0x28, 0xfd, 0x3d, 0x8a, 0x1a,
++      0xde, 0x5f, 0x17, 0xff, 0x01, 0xf1, 0x4c, 0xfa, 0x14, 0x67, 0xf9, 0x3b,
++      0x78, 0xff, 0x95, 0x19, 0xdf, 0xa5, 0x9c, 0xe3, 0xf4, 0x19, 0x06, 0xfa,
++      0x33, 0x6d, 0xd8, 0x9e, 0x49, 0x46, 0xa8, 0x25, 0xcb, 0x67, 0xf2, 0xbe,
++      0x19, 0xed, 0xea, 0x85, 0xb4, 0x03, 0xa5, 0xda, 0x84, 0x37, 0xdf, 0x71,
++      0xdc, 0xff, 0x92, 0xad, 0xf7, 0x3c, 0xa5, 0xf8, 0x68, 0xec, 0xd2, 0xce,
++      0x71, 0xff, 0x2b, 0xb6, 0x82, 0x37, 0xf5, 0xe8, 0x86, 0x77, 0x94, 0xe3,
++      0xfe, 0x97, 0xf3, 0x41, 0xcc, 0x1b, 0x88, 0xf4, 0x58, 0x4a, 0x02, 0x5f,
++      0xcf, 0x87, 0x10, 0x1e, 0x30, 0x71, 0x30, 0x6f, 0xe0, 0xc9, 0x8b, 0x70,
++      0xe0, 0x43, 0xff, 0x2c, 0x0f, 0xc7, 0xbe, 0xce, 0xd6, 0xd0, 0x6b, 0x9c,
++      0x73, 0x92, 0x41, 0xa4, 0xea, 0xcc, 0xe3, 0xfe, 0xf7, 0x07, 0xa0, 0xd4,
++      0x9a, 0x7a, 0xb8, 0xa0, 0xfc, 0xab, 0x93, 0x0a, 0x49, 0x31, 0xf6, 0xcf,
++      0xc5, 0xb2, 0x24, 0xed, 0xce, 0x20, 0xce, 0x9d, 0x71, 0x6a, 0x68, 0xb3,
++      0x15, 0xe6, 0x65, 0x18, 0x1f, 0xd6, 0xf1, 0xa4, 0xed, 0x38, 0xef, 0x19,
++      0x53, 0x89, 0x00, 0xf4, 0xee, 0x77, 0x11, 0x49, 0x2e, 0xa2, 0x5e, 0x8e,
++      0xe6, 0x75, 0x8c, 0xda, 0x26, 0x9e, 0xb3, 0x9b, 0x83, 0x7d, 0x58, 0x8c,
++      0x64, 0xb8, 0x18, 0x43, 0x26, 0xd8, 0xef, 0x91, 0x68, 0x37, 0xea, 0xcc,
++      0x04, 0x0e, 0xb1, 0xdf, 0xa7, 0x97, 0x88, 0x1c, 0x03, 0x2f, 0xff, 0x01,
++      0x7d, 0x25, 0xbe, 0xe3, 0x71, 0xf6, 0x35, 0xb1, 0xf8, 0x9c, 0x83, 0xd9,
++      0x7e, 0x9c, 0x30, 0xe6, 0xd2, 0x0e, 0x61, 0x55, 0x99, 0x7e, 0x6f, 0xbf,
++      0x1d, 0xc4, 0x81, 0x7c, 0xc0, 0xdb, 0x67, 0x87, 0xb0, 0x8f, 0xfe, 0x36,
++      0x8f, 0xa6, 0x1e, 0xa6, 0xdc, 0x79, 0xc4, 0xb5, 0xc2, 0x70, 0x13, 0x26,
++      0x87, 0x23, 0xc6, 0x2b, 0x4a, 0x18, 0x63, 0xa3, 0x97, 0x61, 0x62, 0x58,
++      0xc1, 0x78, 0x94, 0x7d, 0xe7, 0xe7, 0x2f, 0x0f, 0x5f, 0x81, 0xfc, 0xb0,
++      0x07, 0x3b, 0x5c, 0xbd, 0xba, 0x38, 0x53, 0xfa, 0x7f, 0x19, 0x72, 0xa3,
++      0xf0, 0x2e, 0x1a, 0x08, 0xe2, 0xa9, 0xbc, 0xd7, 0xab, 0x0f, 0x84, 0x30,
++      0x9a, 0xff, 0x36, 0xe7, 0x4d, 0x64, 0x6b, 0x18, 0xb1, 0xc7, 0xdc, 0x39,
++      0xac, 0x33, 0x29, 0xac, 0x18, 0x5f, 0x19, 0xcb, 0x34, 0xc6, 0x99, 0x04,
++      0x71, 0x48, 0x7c, 0xdc, 0x4f, 0x0c, 0x12, 0x1f, 0x7f, 0x4d, 0x41, 0x6d,
++      0x02, 0x7d, 0x93, 0xe5, 0xe7, 0x0a, 0xed, 0xdf, 0x8b, 0x75, 0x41, 0x03,
++      0x76, 0x46, 0xec, 0xb4, 0x8c, 0xcb, 0xf2, 0x59, 0xe6, 0xbf, 0x1a, 0xd6,
++      0xfe, 0x6a, 0xec, 0xa0, 0x8f, 0x3d, 0xba, 0x53, 0xee, 0x3b, 0xce, 0x7d,
++      0xf1, 0x3a, 0xda, 0x18, 0x6e, 0xaa, 0x42, 0xd4, 0x78, 0xcb, 0xed, 0x9b,
++      0x85, 0xb1, 0xbc, 0xc4, 0x50, 0x8d, 0xf1, 0xed, 0x28, 0xdb, 0xea, 0x60,
++      0x3b, 0x06, 0xbe, 0x3d, 0xd9, 0x86, 0x7f, 0x9c, 0x8c, 0xe1, 0x1f, 0x26,
++      0x75, 0xfc, 0xfd, 0xa4, 0x86, 0x67, 0x2e, 0xc2, 0xf5, 0x3b, 0xa9, 0x2b,
++      0xc1, 0x30, 0x03, 0x5b, 0x32, 0x15, 0xd8, 0x36, 0x5c, 0x8d, 0xbe, 0xe1,
++      0xe6, 0xd8, 0x73, 0xc4, 0xe3, 0x7f, 0x30, 0x6e, 0xc7, 0x54, 0x43, 0x87,
++      0xeb, 0x33, 0x8f, 0xf0, 0xfe, 0xa3, 0xc3, 0xcd, 0x9c, 0x43, 0xc7, 0x51,
++      0xe3, 0xad, 0x89, 0x43, 0xc4, 0xf7, 0xe3, 0xa1, 0x88, 0x36, 0xa5, 0x46,
++      0xb4, 0x24, 0x7c, 0xb0, 0xdb, 0x54, 0x58, 0x73, 0x22, 0x39, 0x7a, 0x31,
++      0x42, 0xfa, 0x7d, 0x1c, 0x5b, 0x44, 0xb3, 0x54, 0x83, 0xf6, 0xcb, 0x98,
++      0xa1, 0x76, 0x10, 0x5f, 0xaa, 0xf1, 0xfe, 0x70, 0xa4, 0xdf, 0x52, 0xef,
++      0x80, 0xd5, 0xe0, 0x38, 0x5f, 0x8d, 0x63, 0xc3, 0x5c, 0x13, 0xc9, 0x39,
++      0x8c, 0x05, 0x57, 0x98, 0x49, 0x30, 0x8e, 0xe1, 0xf4, 0x80, 0x1e, 0xfe,
++      0x7f, 0x94, 0x3b, 0xf1, 0xdf, 0xbb, 0x23, 0x9a, 0xa6, 0xb6, 0x5a, 0xfb,
++      0x54, 0x92, 0x8d, 0x46, 0x68, 0x61, 0xf3, 0x56, 0x6c, 0x74, 0x79, 0x82,
++      0x82, 0xa0, 0xde, 0x81, 0xbe, 0x0c, 0x2b, 0x85, 0x9a, 0x7b, 0x06, 0xd5,
++      0xe6, 0x69, 0x43, 0x8d, 0x1c, 0xed, 0x56, 0x89, 0xb7, 0x8b, 0x4f, 0x3b,
++      0x5a, 0xa3, 0xe3, 0xb4, 0x2f, 0x96, 0x36, 0x35, 0x34, 0x70, 0x9e, 0xeb,
++      0x39, 0xcf, 0xed, 0x85, 0x6a, 0xbc, 0x33, 0x0c, 0x6b, 0xae, 0x19, 0xe9,
++      0x7a, 0x40, 0xad, 0xc6, 0xdb, 0xa3, 0xd5, 0x38, 0x39, 0xec, 0xc5, 0x5b,
++      0xc3, 0x8e, 0x73, 0x8f, 0x51, 0x87, 0x8a, 0x38, 0xe6, 0x54, 0x20, 0x7a,
++      0x66, 0x04, 0x16, 0x7e, 0xc3, 0xb2, 0xbf, 0x1c, 0x0e, 0xe3, 0x57, 0xc3,
++      0x1f, 0xc3, 0x33, 0x0d, 0xc9, 0x63, 0xb3, 0x19, 0x23, 0xa7, 0x69, 0x3f,
++      0xa7, 0xed, 0x48, 0xcf, 0x3c, 0x4f, 0x64, 0x23, 0x79, 0xcb, 0xfa, 0x2f,
++      0x2a, 0x91, 0xd4, 0x2b, 0x4a, 0x44, 0x1b, 0x50, 0x42, 0x78, 0x97, 0x76,
++      0x7a, 0x2a, 0xdf, 0x9c, 0xf8, 0x01, 0xdb, 0xff, 0xb5, 0xf1, 0x0f, 0xce,
++      0x54, 0xa3, 0xe8, 0x50, 0xf4, 0x45, 0x9d, 0xd3, 0x77, 0xff, 0x91, 0x31,
++      0xea, 0x1f, 0x32, 0xd4, 0x39, 0xfb, 0xf3, 0xcc, 0x6f, 0xc5, 0x2f, 0x99,
++      0xaf, 0x04, 0xe7, 0xf1, 0x72, 0xfc, 0x4f, 0x77, 0x6c, 0xc7, 0x9c, 0xbf,
++      0x09, 0xc9, 0xf8, 0x3a, 0x1b, 0x8b, 0x18, 0x24, 0xe3, 0x3c, 0xea, 0xa4,
++      0x82, 0x32, 0x46, 0x19, 0xab, 0xab, 0x4b, 0x6d, 0x83, 0xf2, 0x90, 0x8a,
++      0x6a, 0xc7, 0x79, 0xcc, 0x28, 0x3d, 0x0f, 0x95, 0xc7, 0xfa, 0x31, 0xde,
++      0x97, 0xf1, 0xbe, 0xe3, 0x11, 0xdd, 0x6b, 0xea, 0xd5, 0xfc, 0x1e, 0xb1,
++      0x92, 0xb8, 0x33, 0xc0, 0xef, 0xb1, 0xe4, 0xf9, 0xef, 0xde, 0xba, 0x8b,
++      0x9f, 0xd3, 0x4e, 0xdd, 0xf6, 0xee, 0xe4, 0x77, 0x19, 0xcb, 0xab, 0xb4,
++      0x9b, 0x0f, 0xb3, 0x13, 0xb1, 0x91, 0x18, 0xed, 0xe9, 0x94, 0xc4, 0x15,
++      0x2b, 0x64, 0xfa, 0x2d, 0xd5, 0x84, 0x46, 0x9c, 0xf0, 0x2b, 0xe6, 0x06,
++      0x68, 0x79, 0x0b, 0x9f, 0xea, 0xf0, 0xe0, 0xaf, 0x3a, 0x14, 0xcc, 0xd6,
++      0x37, 0x20, 0x7b, 0xad, 0xe5, 0xd4, 0xeb, 0x7b, 0x55, 0xf1, 0x81, 0x8a,
++      0x34, 0x2c, 0xfa, 0x1d, 0x12, 0xe4, 0x4a, 0x75, 0x7f, 0xaa, 0xe0, 0x44,
++      0x3c, 0x4a, 0x9b, 0xdb, 0x82, 0x6d, 0x9c, 0xf3, 0x59, 0x69, 0xf8, 0x03,
++      0xa6, 0x09, 0x7b, 0x00, 0xfe, 0x2a, 0xfa, 0xfe, 0x95, 0x03, 0xcd, 0x1b,
++      0xc6, 0x94, 0x48, 0x22, 0xad, 0x44, 0xba, 0xa9, 0x6f, 0xe3, 0xb4, 0x8b,
++      0x1b, 0x11, 0xad, 0x42, 0x91, 0x76, 0x4c, 0xb4, 0xe4, 0xb7, 0x60, 0x60,
++      0x52, 0x3e, 0x27, 0xa0, 0xe7, 0x7f, 0x5c, 0xea, 0x3b, 0xfc, 0x3e, 0xf6,
++      0x61, 0xbf, 0xfd, 0xba, 0x93, 0x0b, 0x46, 0xb4, 0x9c, 0xfb, 0x7d, 0x3d,
++      0xbf, 0xc3, 0x5f, 0x61, 0x3e, 0x88, 0xe7, 0xed, 0x37, 0xe7, 0x94, 0xcb,
++      0x15, 0xfb, 0x7a, 0x69, 0x7f, 0xfe, 0xb7, 0x93, 0x0c, 0xb9, 0xfd, 0xf1,
++      0xd7, 0xb0, 0x8d, 0xcf, 0x0c, 0xb0, 0x8d, 0x4c, 0xb9, 0x3f, 0x40, 0x20,
++      0x2d, 0x71, 0x38, 0xa2, 0x2d, 0x50, 0x9a, 0x8d, 0x01, 0x25, 0x12, 0xbb,
++      0x57, 0x69, 0x4d, 0x8c, 0x91, 0x5f, 0x6e, 0x47, 0xb1, 0x4f, 0xd1, 0x7c,
++      0xb1, 0x3f, 0x0b, 0xf2, 0x50, 0x3c, 0x03, 0x08, 0xcc, 0xd7, 0x17, 0x62,
++      0xb3, 0x3b, 0xa7, 0x50, 0xc2, 0x03, 0x1a, 0x6a, 0xc9, 0x5f, 0xc2, 0x13,
++      0xc0, 0xe4, 0x10, 0xb9, 0x5c, 0xbc, 0x19, 0x9f, 0x63, 0x2c, 0x98, 0xc7,
++      0x32, 0x5f, 0x0c, 0x9e, 0xc7, 0x2f, 0xa5, 0xdf, 0x26, 0xc0, 0xcc, 0x29,
++      0xf2, 0xb2, 0xd4, 0x7f, 0x41, 0x52, 0xee, 0x3d, 0x6e, 0x43, 0xc9, 0xd8,
++      0x91, 0x3d, 0x80, 0x3e, 0x15, 0xf7, 0x24, 0xef, 0x0f, 0x63, 0x33, 0x4e,
++      0xc7, 0xa3, 0xa9, 0x82, 0x12, 0x35, 0x86, 0x14, 0xc3, 0xbf, 0x8d, 0xed,
++      0xed, 0x60, 0x99, 0xed, 0xbc, 0x1e, 0x88, 0xea, 0x5d, 0x77, 0x28, 0xc9,
++      0x2b, 0xab, 0x58, 0xe6, 0xa4, 0x11, 0x25, 0xcf, 0x8c, 0x4e, 0xaf, 0x82,
++      0xe1, 0x7f, 0x22, 0x2f, 0xb2, 0x12, 0xca, 0x96, 0xc2, 0xe3, 0x6a, 0x11,
++      0x8f, 0x7e, 0x5d, 0xd2, 0xd9, 0x49, 0xf9, 0xee, 0xb6, 0xed, 0x1d, 0x68,
++      0xaa, 0xf9, 0xed, 0x7b, 0xda, 0x9c, 0x8b, 0xef, 0xb5, 0x06, 0x47, 0xe9,
++      0x7f, 0x1e, 0xbd, 0x8a, 0x73, 0x27, 0xfc, 0x28, 0x19, 0xf3, 0x41, 0xee,
++      0x79, 0x90, 0xf3, 0x26, 0xc3, 0x1e, 0x7c, 0xe0, 0x24, 0x57, 0xcb, 0xbd,
++      0x6a, 0xa4, 0xba, 0x5b, 0xc3, 0x5e, 0xb4, 0x26, 0xb6, 0x12, 0x0b, 0x8e,
++      0xaf, 0x5e, 0xc6, 0x67, 0x51, 0xe3, 0x39, 0x34, 0x6b, 0x5b, 0x21, 0x9f,
++      0xcf, 0xd2, 0x66, 0x97, 0x49, 0x5d, 0x96, 0x29, 0x72, 0x1f, 0xc1, 0x9a,
++      0x2d, 0x86, 0x83, 0xe7, 0x0d, 0x58, 0x95, 0xe6, 0x41, 0xe5, 0x84, 0xfd,
++      0x1b, 0x27, 0xe9, 0xc5, 0x4a, 0xfa, 0xa5, 0x41, 0xda, 0xab, 0xf9, 0xcd,
++      0xa8, 0x76, 0x94, 0x99, 0x82, 0xc7, 0xb4, 0x94, 0xe3, 0xf9, 0x2d, 0xca,
++      0xeb, 0xf9, 0x7e, 0xe5, 0x54, 0x5e, 0xea, 0x1e, 0x54, 0x4e, 0xe6, 0x25,
++      0x1e, 0x36, 0x69, 0x47, 0xc8, 0x6f, 0xc8, 0xa9, 0xd4, 0x3e, 0x03, 0xca,
++      0x36, 0xa3, 0x96, 0x3c, 0x5f, 0x8f, 0x8d, 0xb0, 0xbf, 0xfb, 0x3b, 0x60,
++      0x6c, 0x37, 0x7c, 0x38, 0x1e, 0x44, 0xa0, 0xcf, 0xf0, 0xca, 0x77, 0xe6,
++      0x03, 0x52, 0xb7, 0x49, 0xdb, 0x9a, 0x3f, 0x47, 0xff, 0x2a, 0x7e, 0xdf,
++      0xdf, 0x51, 0xbe, 0xf7, 0x0b, 0x67, 0x6a, 0xb5, 0xca, 0xef, 0x7f, 0xea,
++      0xe1, 0x50, 0x58, 0x77, 0x26, 0x3f, 0x17, 0x2e, 0xa5, 0x92, 0x3f, 0xd6,
++      0xc3, 0x0a, 0x46, 0xac, 0x1c, 0x73, 0x85, 0xbe, 0x4c, 0x3b, 0xfd, 0x2d,
++      0xcc, 0x58, 0x99, 0x24, 0xbe, 0x93, 0xf7, 0xb2, 0xcd, 0x0a, 0x3d, 0x80,
++      0x9b, 0xec, 0x66, 0x4f, 0x51, 0x7f, 0x2a, 0x31, 0xcc, 0xc3, 0x98, 0x2e,
++      0x1c, 0xef, 0x52, 0xce, 0xdd, 0xa4, 0xbd, 0xc5, 0x7e, 0x57, 0xe9, 0x7a,
++      0xac, 0x4a, 0x69, 0xd2, 0x5e, 0xcf, 0x27, 0xe9, 0xe3, 0x3d, 0x6c, 0x37,
++      0x80, 0xd7, 0xed, 0x5a, 0xe6, 0x20, 0x91, 0xa4, 0x45, 0x81, 0x37, 0x77,
++      0x84, 0x41, 0xce, 0x37, 0xe3, 0xaf, 0x1b, 0x8c, 0xff, 0x12, 0xa3, 0xd5,
++      0x5b, 0x96, 0x24, 0xb0, 0x3e, 0x0f, 0xef, 0xba, 0x0e, 0x13, 0xf7, 0x30,
++      0xb6, 0xdf, 0xc7, 0x78, 0xf9, 0x20, 0x63, 0xe1, 0x8e, 0x38, 0xc7, 0x56,
++      0xef, 0x38, 0x95, 0xfa, 0x66, 0xc9, 0x67, 0x30, 0xc0, 0x58, 0x7c, 0x37,
++      0xe3, 0xcb, 0x16, 0x7e, 0x7e, 0x29, 0xff, 0x1f, 0xce, 0x7d, 0xcc, 0xa7,
++      0x9e, 0xbf, 0x48, 0x26, 0xd4, 0x51, 0xbd, 0x35, 0xb6, 0x95, 0xb1, 0x98,
++      0x72, 0xad, 0x5a, 0xd3, 0x71, 0xae, 0x8c, 0x46, 0x92, 0x3e, 0xc5, 0xc0,
++      0x73, 0x13, 0xc7, 0x1d, 0x6d, 0x8e, 0xe4, 0x52, 0xe5, 0x38, 0x28, 0x63,
++      0x95, 0x1c, 0x41, 0xf0, 0x41, 0xf2, 0x84, 0x99, 0x18, 0xa1, 0xe2, 0xe6,
++      0x61, 0xc9, 0x13, 0xc2, 0x58, 0x65, 0x7f, 0x09, 0xcf, 0xb5, 0x79, 0xd1,
++      0xc5, 0x1c, 0xeb, 0x16, 0x3b, 0x80, 0x3b, 0x88, 0xa5, 0x2b, 0x6c, 0xe6,
++      0x4e, 0xc1, 0x10, 0x6e, 0xb5, 0xbd, 0x38, 0xdc, 0xc6, 0x1c, 0x28, 0x54,
++      0x89, 0x77, 0x0d, 0x0f, 0x8e, 0x18, 0x41, 0xe4, 0x5c, 0x7f, 0xd8, 0x41,
++      0x0c, 0xa4, 0x1e, 0x55, 0xc9, 0x1d, 0x44, 0x87, 0x1e, 0xea, 0x53, 0x45,
++      0xea, 0xbc, 0x0e, 0x3f, 0x2c, 0x17, 0x90, 0x7e, 0x49, 0x3e, 0xf0, 0x33,
++      0x27, 0x35, 0x47, 0xea, 0xc3, 0x0a, 0x98, 0x32, 0x0e, 0xe1, 0xb7, 0x06,
++      0xfa, 0x26, 0x3a, 0xc8, 0xed, 0x66, 0x0e, 0xf5, 0x0c, 0xb9, 0x75, 0x1d,
++      0x5e, 0xd3, 0x85, 0x5b, 0xbf, 0x8a, 0x20, 0x7d, 0xb7, 0x7f, 0x22, 0xba,
++      0xe1, 0x8c, 0xe2, 0xc1, 0x4b, 0x7a, 0x2d, 0x79, 0x9f, 0x89, 0xed, 0x13,
++      0xf0, 0x6e, 0x5d, 0x62, 0x20, 0x3d, 0xd1, 0x9b, 0x98, 0xc5, 0xb4, 0xd7,
++      0xbb, 0xa4, 0xc8, 0x89, 0x3e, 0x43, 0xdd, 0xae, 0x8d, 0xbb, 0x9c, 0xa8,
++      0xc8, 0x07, 0x82, 0x8e, 0x73, 0x52, 0x17, 0x3d, 0x03, 0x07, 0x4a, 0x3a,
++      0xde, 0xcf, 0xcf, 0xfd, 0x25, 0x1d, 0x6f, 0xa1, 0x3c, 0xfa, 0x1f, 0xb6,
++      0x5d, 0xc4, 0x63, 0x34, 0x54, 0x9a, 0xc2, 0x6f, 0x88, 0xc3, 0xc4, 0x93,
++      0x24, 0x75, 0xfc, 0x42, 0x7e, 0xbd, 0xe0, 0x36, 0xa7, 0xbb, 0xdd, 0xc5,
++      0xef, 0xa4, 0x7a, 0x80, 0x76, 0x20, 0x7a, 0x78, 0xad, 0x94, 0xdb, 0x38,
++      0xce, 0x90, 0x21, 0x3a, 0x2e, 0xe7, 0x65, 0xa2, 0xeb, 0x36, 0xc9, 0xb1,
++      0xfa, 0x81, 0xdf, 0xb0, 0xac, 0x87, 0xb8, 0x6b, 0xe2, 0x6b, 0xdd, 0x62,
++      0x3b, 0xb3, 0xdc, 0x58, 0x79, 0xd5, 0x42, 0xc7, 0xf9, 0x4a, 0x5c, 0xc3,
++      0x7b, 0x7a, 0x6b, 0xa2, 0x5d, 0x8d, 0xb0, 0xaf, 0x49, 0xd8, 0x93, 0x1d,
++      0x9c, 0xbb, 0x2b, 0x90, 0x0c, 0x89, 0xad, 0x61, 0x43, 0x45, 0x11, 0xc3,
++      0x71, 0xca, 0xd6, 0x63, 0xdb, 0x38, 0x67, 0xfb, 0x42, 0x5d, 0xe4, 0x71,
++      0x6a, 0x27, 0xd3, 0x7f, 0xf2, 0x27, 0xdd, 0x7a, 0x04, 0xef, 0x38, 0xb9,
++      0x90, 0xc3, 0x38, 0x29, 0xb9, 0xd1, 0x7c, 0x1c, 0x0e, 0x7a, 0xf0, 0x62,
++      0xac, 0x11, 0xc9, 0x7a, 0x05, 0x35, 0xfa, 0x9b, 0xce, 0x77, 0x42, 0xd2,
++      0x0e, 0x73, 0x3c, 0xf5, 0x56, 0x8f, 0xe4, 0x80, 0x5e, 0x5d, 0xe4, 0x76,
++      0x31, 0xc7, 0xbd, 0xb4, 0xfd, 0x7f, 0x75, 0x8e, 0x87, 0xa4, 0xfd, 0x48,
++      0x50, 0x53, 0x7f, 0xd7, 0x1c, 0x7e, 0xdf, 0xf9, 0x81, 0x2b, 0x33, 0xe3,
++      0xea, 0x01, 0xaa, 0xc8, 0x23, 0x54, 0x54, 0x8b, 0xcc, 0x72, 0x3b, 0xe2,
++      0x67, 0x73, 0x79, 0x4f, 0x9e, 0x89, 0x8d, 0x6c, 0x61, 0xbb, 0xcf, 0x39,
++      0x68, 0x94, 0xef, 0xd3, 0x1e, 0x29, 0x6b, 0x4d, 0x1e, 0x5a, 0xe1, 0xc5,
++      0x52, 0xb4, 0xc4, 0x97, 0x2d, 0x97, 0xb1, 0xa8, 0x66, 0x52, 0xf3, 0xc3,
++      0x6a, 0xf4, 0x10, 0x8b, 0xdf, 0x68, 0x6b, 0xc3, 0x72, 0xe6, 0x8c, 0xef,
++      0x10, 0x5c, 0x7a, 0x75, 0x0f, 0xa6, 0x38, 0xbe, 0x27, 0x0d, 0x59, 0x2f,
++      0x70, 0x70, 0x4b, 0xdc, 0x4a, 0xd1, 0x63, 0xad, 0x59, 0xb4, 0x9d, 0x6a,
++      0x5d, 0xe2, 0x7c, 0x2d, 0x6a, 0x4c, 0x6f, 0xec, 0x1d, 0x44, 0x8c, 0x1d,
++      0xe4, 0x39, 0x5a, 0x7d, 0x4b, 0xc2, 0x47, 0xed, 0xbe, 0x6c, 0x47, 0x13,
++      0x47, 0x94, 0xa2, 0x3f, 0xbc, 0xc0, 0xb9, 0x7d, 0xcd, 0xd6, 0x37, 0x56,
++      0x7a, 0x8a, 0xdf, 0x5f, 0x71, 0xf3, 0xd1, 0xb2, 0x3f, 0x84, 0x4b, 0xb8,
++      0xe1, 0xf7, 0x9f, 0xb2, 0x71, 0x86, 0x54, 0x88, 0x79, 0x29, 0xce, 0xf4,
++      0x19, 0x53, 0x8a, 0x4f, 0xaf, 0x25, 0xae, 0x0a, 0x96, 0x56, 0x90, 0x13,
++      0x4a, 0xec, 0xf7, 0xfb, 0xdf, 0x61, 0x19, 0x72, 0xba, 0xe3, 0xb1, 0xeb,
++      0x5b, 0x13, 0x7e, 0x24, 0xad, 0x4a, 0xfa, 0xe5, 0x2c, 0x33, 0xe4, 0xbf,
++      0xaa, 0x60, 0x35, 0x06, 0x68, 0xd7, 0x35, 0xcc, 0x57, 0x5b, 0xd2, 0x13,
++      0x8c, 0xe1, 0x6d, 0x78, 0x70, 0x82, 0x23, 0x6b, 0x18, 0x6c, 0x54, 0x4d,
++      0x59, 0x83, 0x08, 0xc2, 0xd7, 0xf0, 0xe0, 0x0d, 0xaa, 0x79, 0x1c, 0x3d,
++      0x1d, 0xfe, 0xce, 0x44, 0x01, 0xfe, 0x7a, 0x73, 0x13, 0xe2, 0x69, 0xc9,
++      0x3b, 0x05, 0x23, 0x93, 0x5b, 0x89, 0x5a, 0x8d, 0x75, 0xd7, 0x96, 0xf5,
++      0x0d, 0xb5, 0xd6, 0x94, 0xfc, 0x53, 0xeb, 0x7c, 0xc5, 0xc5, 0xd2, 0x20,
++      0xf3, 0x85, 0x1f, 0x87, 0xff, 0xcf, 0xea, 0x27, 0x38, 0x27, 0xd2, 0x17,
++      0xf9, 0x2f, 0x79, 0x3f, 0xbc, 0x2a, 0xb1, 0xb0, 0x77, 0xdc, 0xcb, 0xfc,
++      0x4a, 0xe6, 0x4c, 0xe2, 0xf1, 0x6b, 0xff, 0xf5, 0x79, 0xfa, 0x8b, 0x8f,
++      0xba, 0x7f, 0x44, 0xb7, 0x08, 0xf3, 0x8e, 0xa3, 0xc7, 0x23, 0xe1, 0x0a,
++      0x45, 0xc3, 0xf6, 0xb6, 0x7f, 0xa7, 0x8d, 0x80, 0x38, 0x06, 0x12, 0xeb,
++      0x5a, 0x6c, 0x19, 0xaf, 0x98, 0x51, 0xaf, 0x67, 0x4d, 0xb9, 0xde, 0x80,
++      0x6e, 0xa5, 0xa4, 0xde, 0x68, 0x3c, 0xd2, 0xb3, 0x8d, 0xf5, 0x1e, 0x65,
++      0xbd, 0x24, 0x63, 0xe7, 0x3d, 0x13, 0x41, 0x37, 0x9f, 0xb3, 0xc6, 0xab,
++      0x67, 0xb6, 0x77, 0xbe, 0xde, 0xe3, 0xba, 0x35, 0xe5, 0xb6, 0xb7, 0x38,
++      0xb2, 0xb1, 0xc2, 0xe3, 0x45, 0x9a, 0xf5, 0xa6, 0x58, 0xef, 0xf5, 0x09,
++      0x59, 0x8f, 0xc0, 0x0d, 0xe3, 0x76, 0xe6, 0xb8, 0x47, 0xd7, 0x83, 0x27,
++      0x91, 0x24, 0xe6, 0xba, 0x73, 0x79, 0xc3, 0x58, 0x7e, 0x33, 0xb6, 0xeb,
++      0x87, 0xe2, 0x95, 0xac, 0x77, 0x44, 0x3f, 0x14, 0xf6, 0xd1, 0xaf, 0xd6,
++      0x51, 0x5e, 0x2f, 0xf3, 0x1a, 0x95, 0xfe, 0xb2, 0x65, 0x5c, 0x62, 0xbf,
++      0x41, 0x5e, 0x12, 0xa2, 0xcd, 0xc9, 0x98, 0xa5, 0x5d, 0x99, 0x53, 0x19,
++      0x5f, 0x24, 0x36, 0xee, 0x8e, 0x4f, 0x99, 0x7b, 0x40, 0x72, 0xdd, 0x7a,
++      0x0b, 0x7d, 0x6d, 0x12, 0xff, 0x14, 0x62, 0x6f, 0x03, 0xf3, 0x4f, 0x69,
++      0x23, 0x84, 0x6d, 0xf4, 0xed, 0xfd, 0x86, 0xe3, 0x3c, 0x6f, 0xcc, 0xc7,
++      0x01, 0x23, 0x92, 0x12, 0x3b, 0x7c, 0xd3, 0x58, 0x76, 0xa5, 0xe4, 0x96,
++      0xc0, 0x9f, 0x60, 0x8a, 0xb6, 0x51, 0xa5, 0x8b, 0xbf, 0x29, 0x08, 0x47,
++      0xbd, 0x5a, 0x8d, 0xe2, 0xc0, 0xbf, 0x78, 0xe1, 0xc6, 0x85, 0x1c, 0x7b,
++      0xed, 0xf5, 0x0a, 0xde, 0xbf, 0x4a, 0xc1, 0xa1, 0xab, 0xa2, 0xe1, 0x11,
++      0x65, 0x16, 0xb1, 0x35, 0xda, 0xdd, 0xa9, 0x58, 0x47, 0x59, 0x37, 0xd9,
++      0xe6, 0x89, 0x84, 0xa1, 0xd4, 0xd1, 0xef, 0x5b, 0x34, 0x09, 0xfd, 0xde,
++      0x81, 0x68, 0xf8, 0x51, 0xfe, 0xf7, 0x4c, 0x28, 0x98, 0xd0, 0x23, 0x49,
++      0xb8, 0xf2, 0xd9, 0x36, 0xd3, 0xce, 0xab, 0xa3, 0x8e, 0x73, 0x2c, 0xde,
++      0x1a, 0x3c, 0x86, 0x37, 0x89, 0x6d, 0xd2, 0x4e, 0x19, 0xeb, 0xc1, 0x5c,
++      0x56, 0x4f, 0x76, 0x2a, 0x8e, 0x57, 0xf8, 0xc3, 0xfa, 0xbc, 0xc4, 0xc3,
++      0x72, 0x7f, 0xcb, 0x71, 0xd1, 0x71, 0xde, 0x34, 0x8a, 0xb2, 0x82, 0x1d,
++      0x91, 0x14, 0x30, 0x1f, 0x93, 0x7a, 0xa4, 0x6b, 0x8a, 0x3a, 0x08, 0xd3,
++      0xdf, 0xe6, 0xe9, 0x8d, 0x38, 0xee, 0x8b, 0x04, 0x8f, 0x2b, 0xcb, 0xcf,
++      0xaa, 0x58, 0xb4, 0xfe, 0x09, 0xa5, 0x75, 0x43, 0x15, 0xf4, 0x64, 0x41,
++      0x99, 0x2b, 0x3a, 0x09, 0x07, 0xc8, 0xa5, 0xd6, 0xc1, 0x8d, 0xd1, 0xb8,
++      0xcd, 0xf6, 0x26, 0xa7, 0xd1, 0x4c, 0xdb, 0xd7, 0x7b, 0xee, 0x23, 0x0f,
++      0x04, 0x3e, 0xce, 0x24, 0x41, 0xfa, 0xda, 0x88, 0xd4, 0xa7, 0x1c, 0xe7,
++      0x7e, 0xf6, 0x75, 0x07, 0xfb, 0xfa, 0x60, 0xfc, 0x3d, 0xe7, 0x5f, 0x5d,
++      0x99, 0x37, 0x62, 0x44, 0xbf, 0x54, 0xee, 0xbb, 0xcc, 0xf5, 0x45, 0xae,
++      0x0f, 0x37, 0xcf, 0x61, 0xbe, 0xd2, 0x21, 0xb8, 0x71, 0xd2, 0x4b, 0xdc,
++      0xa0, 0x3c, 0xc6, 0x10, 0xf5, 0xd2, 0x38, 0xec, 0x01, 0xe3, 0x5b, 0x38,
++      0xa5, 0xa8, 0x24, 0x42, 0x41, 0xf8, 0x75, 0x07, 0x0f, 0x90, 0x33, 0x24,
++      0xe7, 0xd4, 0xe1, 0x73, 0x86, 0x1f, 0xb3, 0xa2, 0xea, 0x65, 0x1e, 0xce,
++      0xc9, 0x81, 0xb8, 0x7c, 0xf7, 0x61, 0x6a, 0x8e, 0x07, 0x9b, 0xc9, 0x25,
++      0x82, 0x51, 0x75, 0x9e, 0xdc, 0xf7, 0xb7, 0xcb, 0x77, 0xf6, 0x7f, 0xae,
++      0x82, 0xfb, 0x69, 0x15, 0x6a, 0xb4, 0x37, 0x2c, 0xf7, 0xbb, 0x0c, 0xf9,
++      0xae, 0xa0, 0x39, 0xee, 0xe5, 0xbc, 0x38, 0xf0, 0x48, 0x7a, 0x1f, 0xe5,
++      0xfd, 0xb8, 0x7c, 0x4e, 0xde, 0xcf, 0x71, 0x27, 0xf7, 0x29, 0x82, 0x33,
++      0x3f, 0x72, 0x5e, 0x64, 0x1c, 0x09, 0xf2, 0xf9, 0xe7, 0xd8, 0xf6, 0xd1,
++      0xf8, 0xf3, 0xce, 0x3c, 0xe2, 0xeb, 0xb1, 0x84, 0x86, 0xf9, 0x57, 0x35,
++      0xe1, 0xf8, 0x9d, 0x32, 0x66, 0x05, 0xb3, 0xf4, 0x2f, 0xf8, 0x24, 0xcf,
++      0xac, 0xd5, 0xe7, 0xe2, 0xe6, 0x3b, 0x8a, 0xf7, 0xaa, 0xa2, 0xb2, 0x4e,
++      0xa8, 0xa1, 0xea, 0xaa, 0x06, 0x68, 0xa5, 0x7b, 0xcb, 0xa3, 0xde, 0xee,
++      0x59, 0x8a, 0x1e, 0xbc, 0x4d, 0x91, 0xe7, 0xbf, 0x24, 0xb7, 0x75, 0x9c,
++      0x07, 0x38, 0x5f, 0x2d, 0xf1, 0x00, 0x4e, 0xb3, 0x9d, 0x5e, 0xea, 0x6f,
++      0xe5, 0xf9, 0xf9, 0x2a, 0xd7, 0xff, 0xb9, 0xa3, 0x7d, 0x4a, 0xea, 0x8a,
++      0x8c, 0x85, 0x5d, 0x37, 0x2b, 0x1c, 0x50, 0xb5, 0xe8, 0xd9, 0xd5, 0x19,
++      0xcb, 0xf6, 0xba, 0xdf, 0x83, 0x1d, 0xaf, 0x9d, 0x5f, 0xf3, 0x3a, 0xe3,
++      0xc6, 0xa3, 0x65, 0xd7, 0x07, 0x71, 0xdc, 0xa9, 0x6f, 0xb7, 0x82, 0x95,
++      0x90, 0xb8, 0xd4, 0x1c, 0xfb, 0x0a, 0xe5, 0xfe, 0xc0, 0x28, 0xc6, 0xac,
++      0xfd, 0x46, 0x24, 0x6b, 0xd1, 0x1f, 0x52, 0xcc, 0x13, 0x3b, 0x25, 0x76,
++      0x4f, 0xd6, 0xfa, 0x50, 0x3b, 0x1f, 0x95, 0xed, 0x91, 0xfe, 0x05, 0xcc,
++      0x9b, 0x3c, 0x1d, 0x12, 0xeb, 0x64, 0x7e, 0xdc, 0x32, 0x6c, 0xab, 0x0a,
++      0xcb, 0xd9, 0xc7, 0x78, 0xfb, 0xef, 0x8b, 0x13, 0x22, 0x47, 0xac, 0x33,
++      0xd2, 0x9f, 0xc4, 0xef, 0x2b, 0x0b, 0x46, 0x65, 0x59, 0x4f, 0xf2, 0xdf,
++      0x90, 0xca, 0xab, 0xe4, 0x19, 0x15, 0xc1, 0xde, 0x8e, 0x46, 0x5e, 0xf2,
++      0xdc, 0x7b, 0xc3, 0xda, 0xfc, 0xf9, 0x75, 0x3c, 0x64, 0x8d, 0x0a, 0xa8,
++      0x57, 0x0b, 0x66, 0x13, 0x7d, 0x83, 0x32, 0x3e, 0x8b, 0x56, 0x2e, 0x39,
++      0x7a, 0xe7, 0x5d, 0x77, 0xd3, 0x9f, 0x9f, 0x63, 0x8b, 0xa3, 0xe4, 0x33,
++      0x96, 0xeb, 0x19, 0xe2, 0xeb, 0x33, 0xd7, 0xf5, 0x24, 0x86, 0x94, 0xd7,
++      0x06, 0x1b, 0x30, 0xb8, 0xfb, 0x0e, 0x68, 0x8d, 0x45, 0x1c, 0x52, 0xcd,
++      0xc5, 0x58, 0x96, 0x7d, 0xdb, 0x57, 0xe4, 0xe0, 0xb5, 0x18, 0xd8, 0x1d,
++      0x47, 0x6e, 0x8e, 0x3c, 0x93, 0x7b, 0x7e, 0x08, 0x4e, 0x6e, 0xdf, 0x7d,
++      0x99, 0xe4, 0xd4, 0x61, 0x91, 0x9b, 0xa2, 0xef, 0xa8, 0xfa, 0xdb, 0x8e,
++      0x15, 0x14, 0xf9, 0x87, 0xae, 0xf4, 0x52, 0x87, 0x37, 0xa1, 0xb5, 0x67,
++      0x0c, 0xa7, 0xc8, 0xeb, 0xdc, 0x35, 0x54, 0xad, 0xd2, 0x9c, 0xba, 0xdf,
++      0x87, 0x68, 0x6a, 0x9c, 0x38, 0x10, 0x98, 0xf0, 0x93, 0x9f, 0xcc, 0x77,
++      0xd7, 0x8e, 0x96, 0x91, 0x7f, 0xa4, 0xc8, 0x6d, 0x3f, 0xee, 0xf5, 0xe2,
++      0x6e, 0x62, 0xc6, 0x7e, 0xbd, 0x75, 0xc3, 0x18, 0x7e, 0x45, 0xac, 0x93,
++      0xf2, 0x3f, 0x60, 0x7b, 0x22, 0xd3, 0xcb, 0xf6, 0xe0, 0xf7, 0x12, 0x8f,
++      0xc9, 0x09, 0xbd, 0x3e, 0x3d, 0xed, 0x93, 0xf8, 0x2d, 0xdc, 0x75, 0xc7,
++      0x6e, 0x05, 0x9d, 0x94, 0xf3, 0x28, 0x6d, 0xe6, 0xfe, 0x28, 0xbc, 0x5d,
++      0x57, 0x91, 0xa3, 0x90, 0xf3, 0x61, 0x4e, 0x00, 0x8f, 0x8c, 0x23, 0x91,
++      0xd7, 0xa7, 0xe6, 0x05, 0xf0, 0x26, 0xe5, 0x08, 0xae, 0x57, 0x94, 0xe4,
++      0xf4, 0xac, 0xb9, 0x58, 0x4e, 0x2d, 0x1e, 0x2f, 0xc9, 0xd9, 0x43, 0x39,
++      0xd7, 0xb4, 0xc0, 0x5b, 0x7b, 0x8d, 0xcc, 0x55, 0x1b, 0xfd, 0xa7, 0x16,
++      0x19, 0x17, 0xdb, 0xc9, 0xe9, 0x3e, 0x06, 0x45, 0x5f, 0x28, 0xfc, 0xff,
++      0x1b, 0x6e, 0xbd, 0x9b, 0xda, 0xa6, 0xa6, 0xeb, 0x09, 0x9e, 0x67, 0x5a,
++      0xa6, 0xe8, 0xa8, 0x65, 0xdd, 0x34, 0x62, 0xeb, 0xee, 0xea, 0x72, 0x7f,
++      0xd9, 0x4e, 0xb9, 0x8d, 0x06, 0xde, 0x0b, 0xe1, 0x11, 0xe6, 0x71, 0x37,
++      0xb1, 0x9d, 0x03, 0x86, 0x70, 0xb1, 0x56, 0xa3, 0x4a, 0x91, 0xbc, 0x36,
++      0xcc, 0xb8, 0xde, 0x80, 0x3e, 0x37, 0x16, 0x84, 0x59, 0x7f, 0x77, 0x5d,
++      0x91, 0x4f, 0xc0, 0x77, 0x2b, 0xcb, 0x76, 0xc6, 0x8b, 0xed, 0xf9, 0x74,
++      0xc9, 0x15, 0xdb, 0xb1, 0x7f, 0xf8, 0xfc, 0xf3, 0xc8, 0x4d, 0xfa, 0xcc,
++      0xf9, 0x9a, 0x8a, 0x10, 0x4b, 0x2b, 0x50, 0x5d, 0x21, 0x58, 0x7f, 0xd1,
++      0xd8, 0xb7, 0x8c, 0xff, 0x29, 0xef, 0x57, 0x63, 0xeb, 0xb8, 0x83, 0x2d,
++      0x6e, 0x9e, 0x50, 0x81, 0xde, 0x36, 0xc1, 0x43, 0xb1, 0xa5, 0x39, 0x92,
++      0x27, 0x25, 0x72, 0x90, 0x18, 0x27, 0xf6, 0xb3, 0xc6, 0xb5, 0x1f, 0x8f,
++      0x32, 0xd3, 0x7e, 0x36, 0xe3, 0xbb, 0xfa, 0xa1, 0x3b, 0x2a, 0x71, 0xe8,
++      0x2e, 0x59, 0xff, 0xde, 0x10, 0xc7, 0xe1, 0x5b, 0xe8, 0x9b, 0xaf, 0x13,
++      0x5b, 0xb6, 0xb4, 0x30, 0x86, 0xb8, 0x98, 0xa5, 0xa0, 0x92, 0xb1, 0x7d,
++      0xdb, 0x6e, 0xe6, 0xc0, 0x6a, 0x90, 0x6d, 0x5e, 0x8a, 0x5d, 0xd2, 0x7f,
++      0x83, 0xb9, 0xee, 0xa1, 0x2f, 0x56, 0x22, 0x20, 0x39, 0xc7, 0x4f, 0x4e,
++      0x51, 0xc6, 0x4d, 0x46, 0x59, 0x57, 0xa2, 0xa7, 0xb2, 0x9c, 0x06, 0xa4,
++      0x77, 0x97, 0xeb, 0x2b, 0x78, 0x29, 0x1a, 0x2e, 0xad, 0x3f, 0x37, 0x60,
++      0x60, 0xfc, 0xd0, 0x31, 0x72, 0x0d, 0x27, 0xd1, 0x72, 0x68, 0x63, 0x98,
++      0x7d, 0x39, 0x13, 0x2f, 0xcf, 0xa9, 0xf8, 0xe6, 0x4c, 0x19, 0x62, 0xbb,
++      0x50, 0x6a, 0x17, 0x62, 0x4b, 0x2d, 0x6d, 0x34, 0x1f, 0x45, 0xaa, 0xc6,
++      0xac, 0x85, 0x3d, 0x4e, 0xdf, 0x9a, 0xa8, 0x80, 0xf7, 0x5a, 0x89, 0x7d,
++      0xc2, 0x77, 0xbc, 0x37, 0x9c, 0xb0, 0x2b, 0xf0, 0x69, 0xe3, 0x9c, 0x23,
++      0xb8, 0x78, 0x4c, 0xc7, 0xe5, 0x15, 0xc4, 0xc4, 0x85, 0xf1, 0x68, 0x72,
++      0x1d, 0xf3, 0xc2, 0x23, 0x6d, 0xde, 0x1b, 0xde, 0xca, 0xff, 0x9a, 0xdc,
++      0xf2, 0xd2, 0xf1, 0x88, 0x3e, 0x70, 0x74, 0x45, 0x54, 0xda, 0x94, 0xf6,
++      0xca, 0x36, 0x2a, 0xed, 0x3b, 0x4e, 0x34, 0x1e, 0x70, 0xe7, 0xbc, 0x3c,
++      0x86, 0x37, 0xf4, 0xf2, 0x18, 0x02, 0x8c, 0xa7, 0x49, 0x72, 0x57, 0xe1,
++      0xd5, 0x7e, 0xe6, 0x91, 0x5e, 0xf2, 0xf1, 0x6e, 0x08, 0xdf, 0x3b, 0x4a,
++      0x7e, 0xf2, 0xa4, 0x0d, 0xbc, 0x93, 0x75, 0xb0, 0x2c, 0x3e, 0x8b, 0xf8,
++      0xd2, 0x4f, 0xd9, 0xb2, 0xa6, 0x76, 0x50, 0x19, 0x67, 0xae, 0x79, 0xdc,
++      0x5b, 0x95, 0x54, 0x99, 0x5b, 0x1e, 0xc8, 0x47, 0xc3, 0x87, 0x98, 0x67,
++      0xfa, 0x99, 0xeb, 0x72, 0x06, 0x94, 0x27, 0x99, 0x67, 0xee, 0x2b, 0xe5,
++      0x99, 0x07, 0xf2, 0x01, 0xe4, 0xb3, 0xc4, 0xc6, 0x38, 0xf3, 0x5b, 0x37,
++      0x4f, 0x0f, 0x60, 0x32, 0xab, 0x32, 0x1f, 0x7f, 0xdf, 0x99, 0xaa, 0x77,
++      0xf7, 0x0b, 0xf0, 0x75, 0xbb, 0x01, 0x07, 0x87, 0x9b, 0x70, 0x36, 0x3f,
++      0x45, 0xbb, 0xb8, 0x0c, 0xd3, 0xa3, 0xb5, 0x98, 0x18, 0x7e, 0x95, 0x9f,
++      0xdb, 0xf0, 0xfe, 0xa8, 0x9b, 0xe3, 0x12, 0x0f, 0xa5, 0x7f, 0x07, 0x95,
++      0x43, 0x6e, 0x8e, 0x6b, 0x25, 0x99, 0xdb, 0x26, 0xfa, 0x4b, 0xb9, 0xed,
++      0x14, 0x73, 0xdb, 0x23, 0x6c, 0xf3, 0x85, 0x52, 0x9b, 0xcf, 0xb9, 0xff,
++      0xa5, 0x2f, 0x52, 0x77, 0x66, 0xbd, 0x44, 0x52, 0xd6, 0xa6, 0xc7, 0xed,
++      0x68, 0xac, 0x5c, 0xf7, 0x05, 0xd6, 0x3b, 0x72, 0xbe, 0xde, 0x6a, 0x0c,
++      0x64, 0xd6, 0x90, 0xe7, 0xcb, 0xda, 0xca, 0x7b, 0x6b, 0x6c, 0xea, 0xf2,
++      0xcb, 0xd1, 0xa9, 0xee, 0x59, 0xa8, 0xc3, 0xfa, 0xb8, 0x70, 0xa2, 0xb7,
++      0xc8, 0x89, 0x22, 0x89, 0x95, 0x8c, 0x0f, 0x9e, 0x68, 0x84, 0x58, 0x0f,
++      0x44, 0x27, 0x98, 0x03, 0xe4, 0xeb, 0x70, 0x37, 0x73, 0x31, 0xb5, 0x7e,
++      0x75, 0x69, 0x0f, 0xab, 0x94, 0xe3, 0x78, 0xd6, 0xa0, 0x6f, 0x52, 0xe4,
++      0xad, 0x26, 0xbf, 0xae, 0xc1, 0x2d, 0xc5, 0x75, 0x0b, 0xbf, 0x9f, 0xb2,
++      0xfd, 0xd1, 0xa9, 0x18, 0x5d, 0xc6, 0x38, 0xc0, 0x1b, 0xcf, 0xd9, 0x0a,
++      0x96, 0xe9, 0x3e, 0xac, 0x0b, 0xd6, 0x61, 0x99, 0xf1, 0xef, 0xce, 0x2d,
++      0xab, 0xe5, 0xd9, 0x79, 0x1e, 0xe1, 0xaf, 0x64, 0xbb, 0x6f, 0x92, 0x53,
++      0x8f, 0xf3, 0xcb, 0x54, 0xbe, 0x78, 0xdf, 0xca, 0x53, 0x36, 0xe5, 0x6e,
++      0xa3, 0xdc, 0x7b, 0x83, 0x6e, 0xbe, 0x5b, 0x2a, 0x37, 0x15, 0xf3, 0x10,
++      0xd7, 0xa5, 0x6c, 0x27, 0xe5, 0xde, 0x4d, 0xb9, 0xfd, 0x41, 0xe9, 0xdf,
++      0xbf, 0x3b, 0xf7, 0xae, 0x96, 0x67, 0xe5, 0x7d, 0x13, 0x29, 0xff, 0x9e,
++      0xc8, 0x35, 0xc6, 0x4b, 0x6d, 0x1d, 0xb2, 0x91, 0x95, 0xdc, 0x6f, 0x6d,
++      0x47, 0x54, 0xeb, 0x75, 0xd7, 0xb2, 0x35, 0xac, 0xcb, 0x6b, 0xb8, 0x87,
++      0xba, 0xcb, 0x79, 0xcb, 0x63, 0x72, 0xfb, 0x64, 0x09, 0x77, 0x5e, 0xce,
++      0x72, 0x7d, 0x25, 0xdc, 0xee, 0xcc, 0x8b, 0x0d, 0xcd, 0xdc, 0x4f, 0x6a,
++      0x2a, 0xf9, 0xb3, 0x17, 0x4f, 0xdb, 0x1f, 0x9c, 0x1b, 0xcc, 0x48, 0x3c,
++      0x93, 0xf5, 0x10, 0x0d, 0xd9, 0xfc, 0xe5, 0x68, 0x1e, 0x0a, 0x62, 0xad,
++      0x31, 0x9b, 0xbe, 0xfe, 0xa5, 0xf3, 0x36, 0x75, 0x80, 0xed, 0xc0, 0xe7,
++      0x8a, 0x57, 0x9e, 0xce, 0xb7, 0x06, 0x1b, 0x70, 0xe9, 0x1e, 0xd2, 0xfc,
++      0x64, 0x8d, 0x19, 0xed, 0xfe, 0x0e, 0xe7, 0xae, 0xca, 0xe5, 0xd0, 0x5b,
++      0x94, 0x1c, 0xe7, 0xef, 0xa9, 0xd2, 0xfc, 0x3d, 0x99, 0xbf, 0xae, 0xb2,
++      0x88, 0x45, 0x97, 0xa3, 0x65, 0x48, 0xfe, 0x07, 0xf1, 0x46, 0xc7, 0xc7,
++      0x79, 0xef, 0x72, 0x2c, 0x1c, 0xf9, 0x54, 0x25, 0xb9, 0xb5, 0x51, 0xcc,
++      0xc1, 0x2f, 0xcd, 0x33, 0x22, 0xfd, 0x16, 0x16, 0xb0, 0x5c, 0x13, 0x75,
++      0x26, 0x18, 0x28, 0xfd, 0x7a, 0xe4, 0x7c, 0xbf, 0xbe, 0xcc, 0x7e, 0xa5,
++      0x7c, 0xb2, 0xd6, 0x2a, 0xfd, 0x52, 0x92, 0xb5, 0x66, 0x13, 0xde, 0x1f,
++      0x40, 0x30, 0x68, 0x46, 0x53, 0x2f, 0xd3, 0xde, 0x27, 0xd8, 0xd7, 0x7a,
++      0xf4, 0x2b, 0x79, 0x77, 0xaf, 0xea, 0x20, 0xcb, 0xcc, 0x8c, 0xa3, 0xd2,
++      0x4f, 0xaf, 0xe4, 0x59, 0x3e, 0xd9, 0x67, 0xf2, 0xe9, 0x22, 0xff, 0x6d,
++      0x72, 0xc5, 0x3e, 0xca, 0x4f, 0x72, 0xfe, 0xfc, 0x6c, 0x03, 0x56, 0xb5,
++      0xd9, 0xed, 0x72, 0x55, 0x2f, 0xfd, 0x6e, 0x19, 0x6d, 0xea, 0xc9, 0x9c,
++      0x82, 0x51, 0x2a, 0xfd, 0x68, 0x56, 0xd6, 0x89, 0xc3, 0x38, 0x90, 0xf3,
++      0xe1, 0x85, 0xec, 0x3c, 0x8c, 0xe7, 0x2a, 0xf0, 0x5c, 0xf6, 0x32, 0xec,
++      0xcb, 0x11, 0xfd, 0xb2, 0x97, 0x63, 0x24, 0xe7, 0xc7, 0x4f, 0xb2, 0xd4,
++      0x53, 0xae, 0x0a, 0xff, 0x9c, 0xfd, 0x13, 0x7c, 0x3d, 0x57, 0x8d, 0xd7,
++      0xb2, 0x57, 0xe0, 0x60, 0xae, 0x06, 0xaf, 0x64, 0xc9, 0x27, 0x73, 0x01,
++      0xbc, 0x9c, 0xd5, 0x50, 0xc8, 0xcd, 0xc2, 0x4b, 0xd9, 0x08, 0x26, 0x72,
++      0xb5, 0xf8, 0x6e, 0x76, 0x01, 0xf2, 0xb9, 0x3a, 0x7c, 0x27, 0xdb, 0x8c,
++      0x2f, 0xe7, 0x82, 0x78, 0x31, 0xab, 0xe3, 0xa9, 0x5c, 0x3d, 0x8e, 0x65,
++      0xa3, 0x6c, 0x37, 0x84, 0xa3, 0xc3, 0x31, 0x1c, 0x18, 0x6d, 0xc4, 0x0b,
++      0xc3, 0x8b, 0x30, 0x3e, 0x1a, 0xc6, 0x73, 0xc3, 0x6d, 0xd8, 0x37, 0xfa,
++      0x6f, 0x15, 0xa2, 0x9f, 0x23, 0xf6, 0xff, 0x38, 0xaf, 0xc7, 0x6d, 0x1f,
++      0x31, 0xdf, 0xaf, 0xda, 0xa2, 0x37, 0xbf, 0x55, 0xcf, 0x39, 0x7a, 0x3a,
++      0xef, 0xce, 0x3b, 0xf4, 0x21, 0x77, 0x7f, 0x06, 0x7d, 0xc6, 0x65, 0xcc,
++      0xd9, 0xfa, 0x25, 0x7e, 0xd0, 0x16, 0x0e, 0x2a, 0xdb, 0x5d, 0x1c, 0xa9,
++      0x4d, 0xce, 0xa2, 0x2e, 0x39, 0xec, 0x60, 0x0d, 0x7d, 0x32, 0x4b, 0x7f,
++      0xb6, 0x38, 0xaf, 0x76, 0xfe, 0xa0, 0xb2, 0x83, 0x39, 0xe2, 0x95, 0x43,
++      0x96, 0x53, 0xed, 0xe2, 0x69, 0x34, 0xb9, 0x88, 0x3e, 0x17, 0x1b, 0x11,
++      0x7d, 0xde, 0x59, 0x21, 0xfa, 0xac, 0xd0, 0x3f, 0xcc, 0x4e, 0xca, 0x7a,
++      0x0f, 0x94, 0xec, 0xe1, 0xfb, 0x95, 0xc5, 0xbc, 0xaa, 0x3c, 0xef, 0x8e,
++      0x33, 0x68, 0x94, 0xe7, 0x9e, 0xfc, 0xaf, 0x41, 0xd6, 0xa4, 0xc0, 0x58,
++      0x50, 0x8f, 0x5c, 0x48, 0xf2, 0xf5, 0x99, 0x98, 0x81, 0x64, 0xa5, 0x19,
++      0xd5, 0x5a, 0xd4, 0x99, 0x7c, 0x45, 0xb0, 0x43, 0xe4, 0x5b, 0x2e, 0xee,
++      0x1c, 0x3e, 0x8f, 0x1f, 0x67, 0x2b, 0x85, 0xa7, 0xec, 0xb7, 0xa5, 0x6f,
++      0x50, 0x2b, 0xa4, 0xcf, 0x28, 0xde, 0x43, 0xa1, 0xac, 0xaf, 0x99, 0x76,
++      0xa7, 0x52, 0xb7, 0x62, 0x7b, 0x5e, 0xfa, 0xc2, 0x72, 0x89, 0x7b, 0xec,
++      0x47, 0x13, 0x5e, 0xb0, 0x8b, 0x7b, 0x33, 0xe3, 0x79, 0xd1, 0xb7, 0x86,
++      0xad, 0xe4, 0x5e, 0x87, 0x87, 0x15, 0xea, 0xee, 0x2f, 0x51, 0xdc, 0x3f,
++      0xf2, 0xd2, 0x57, 0xd7, 0xb2, 0x3c, 0x63, 0x7c, 0x61, 0xda, 0xdd, 0x1b,
++      0xae, 0x73, 0xf3, 0xee, 0x30, 0x0a, 0x03, 0x1f, 0x9c, 0xdb, 0x96, 0xf9,
++      0xe5, 0xb9, 0x3d, 0x99, 0x68, 0x4a, 0xf6, 0x67, 0xf2, 0x13, 0x3e, 0xe4,
++      0xf6, 0x06, 0xf0, 0xd4, 0x84, 0x1f, 0x35, 0x69, 0xc9, 0xf3, 0x83, 0x78,
++      0x6a, 0xff, 0xa1, 0x15, 0x35, 0x68, 0xe0, 0xff, 0x10, 0xaf, 0x46, 0x5e,
++      0x01, 0x1c, 0x1b, 0xf5, 0xe3, 0x2d, 0x5b, 0x7c, 0x58, 0xfc, 0xa3, 0x8d,
++      0xd8, 0x1f, 0x60, 0xbc, 0x55, 0x19, 0x47, 0x9a, 0x70, 0x38, 0x1f, 0xc4,
++      0xf2, 0x6c, 0x3d, 0x9e, 0xcb, 0x25, 0xf1, 0x44, 0xa6, 0x1e, 0x67, 0x1f,
++      0xf3, 0x63, 0xde, 0x3e, 0xf1, 0x87, 0x06, 0x9c, 0x1e, 0xfc, 0x04, 0x0a,
++      0x7b, 0x93, 0xb0, 0x33, 0xb3, 0xb1, 0x63, 0xb0, 0x01, 0xdf, 0x61, 0x99,
++      0x7e, 0xea, 0xa9, 0x7a, 0xa7, 0x89, 0x17, 0x69, 0x43, 0x55, 0x3b, 0x6f,
++      0xa4, 0xec, 0x30, 0x7c, 0x03, 0x21, 0x1c, 0xc9, 0x7b, 0x85, 0xd7, 0x71,
++      0x1e, 0x7f, 0x5a, 0x9c, 0x17, 0x08, 0x6f, 0xbd, 0x98, 0x07, 0x1e, 0x3f,
++      0xcf, 0x03, 0x81, 0x5c, 0x5e, 0xd6, 0x18, 0xdb, 0x3a, 0xfb, 0xec, 0x89,
++      0xff, 0xcf, 0x6f, 0xfe, 0xf4, 0xdb, 0x15, 0x4b, 0x0c, 0x62, 0x9d, 0x8c,
++      0x7f, 0xed, 0x83, 0xd5, 0xe6, 0x86, 0x2f, 0xae, 0x58, 0x52, 0x89, 0xfb,
++      0xdd, 0xf9, 0xea, 0x81, 0xbd, 0xbb, 0x9b, 0xf1, 0xb5, 0xb5, 0x67, 0x40,
++      0xb9, 0x02, 0xa9, 0xfa, 0x21, 0xde, 0x53, 0x4b, 0x3e, 0x07, 0x55, 0x6c,
++      0xad, 0x8e, 0xfa, 0x54, 0x0b, 0x1a, 0x4e, 0xd0, 0xc8, 0x6a, 0xd3, 0x11,
++      0x4c, 0xd5, 0xcb, 0x38, 0x63, 0xcc, 0xb3, 0x3c, 0xb2, 0x77, 0x8d, 0x4f,
++      0x33, 0xc6, 0x9d, 0x5d, 0xac, 0x20, 0xf1, 0x67, 0xe2, 0x83, 0xb7, 0x96,
++      0xf6, 0x80, 0x65, 0x3f, 0x4c, 0xe6, 0xad, 0xac, 0xff, 0xbd, 0xb2, 0xee,
++      0xc9, 0x3f, 0xc1, 0x0a, 0x2f, 0x0e, 0xdb, 0x39, 0xe6, 0x08, 0x32, 0x07,
++      0x32, 0xa6, 0xed, 0xac, 0x27, 0xe3, 0x92, 0xe7, 0xad, 0x89, 0xfa, 0x8f,
++      0x1c, 0x97, 0x8c, 0x67, 0xad, 0x1f, 0xd5, 0x32, 0x86, 0xb2, 0x2e, 0xfa,
++      0x58, 0xf7, 0x51, 0xde, 0x93, 0x7a, 0x8e, 0xb3, 0xfd, 0xa2, 0x98, 0x55,
++      0x91, 0xac, 0x66, 0xdf, 0x9f, 0xb4, 0xa3, 0xc9, 0x77, 0x88, 0x8b, 0xc7,
++      0xa8, 0xc3, 0x51, 0x5b, 0xec, 0x6f, 0x0b, 0xed, 0xae, 0x5f, 0x39, 0x7a,
++      0xde, 0xf6, 0x80, 0x83, 0xb6, 0xcc, 0xaf, 0xf0, 0x29, 0x19, 0xaf, 0x86,
++      0xe9, 0x89, 0xa0, 0xcb, 0xc7, 0xdf, 0xb6, 0xc5, 0x26, 0x62, 0xcc, 0xcf,
++      0xa6, 0xcf, 0xf5, 0x66, 0x0c, 0x1c, 0xe3, 0xdc, 0x9e, 0xb6, 0xab, 0x88,
++      0x37, 0x1d, 0x90, 0xbd, 0xce, 0xf7, 0xed, 0x04, 0x5e, 0x22, 0x66, 0xbd,
++      0x47, 0x5b, 0xfb, 0x2e, 0x31, 0xec, 0x5d, 0x5b, 0xc7, 0x77, 0x68, 0x7b,
++      0xef, 0xd8, 0x31, 0xbc, 0x98, 0xaf, 0xc7, 0x51, 0xe2, 0xd0, 0x49, 0x7e,
++      0x5e, 0x9e, 0xf7, 0xc1, 0x0a, 0xc9, 0xbe, 0xda, 0x1e, 0x3f, 0x6a, 0x7b,
++      0xd9, 0xe7, 0x48, 0x97, 0x1c, 0x44, 0x79, 0x96, 0xe3, 0xd3, 0x94, 0x32,
++      0x0f, 0x29, 0xe7, 0x04, 0x49, 0x64, 0x33, 0x33, 0xb1, 0x21, 0xd2, 0x9f,
++      0xa3, 0xdd, 0xfa, 0xd2, 0xe5, 0x38, 0xc0, 0xd8, 0x59, 0x10, 0xdb, 0xf6,
++      0xc0, 0x33, 0x24, 0xf6, 0x7f, 0x0d, 0x75, 0x3d, 0x7d, 0x4e, 0xf6, 0xd2,
++      0x54, 0x7d, 0x8a, 0xfe, 0x5e, 0x85, 0xde, 0xdc, 0xe5, 0xa8, 0x19, 0x5a,
++      0x8a, 0xfb, 0xe3, 0xe2, 0xf7, 0x7e, 0xf4, 0xe7, 0x3c, 0xa8, 0x1c, 0x22,
++      0x77, 0x61, 0xd9, 0xa9, 0x50, 0x31, 0x1e, 0xa9, 0x69, 0xc3, 0xf5, 0x83,
++      0x05, 0x85, 0x0f, 0xce, 0xd9, 0x99, 0x43, 0xf3, 0x54, 0x4c, 0x9f, 0x4b,
++      0x67, 0x02, 0xe8, 0xa3, 0x4d, 0xab, 0x69, 0x05, 0x75, 0x7a, 0x88, 0xf9,
++      0x5f, 0x1b, 0x7a, 0xa9, 0x8b, 0xf9, 0xe9, 0x26, 0x3c, 0x31, 0xd1, 0x88,
++      0x79, 0xbb, 0x4c, 0x3c, 0x4e, 0xdb, 0x0f, 0xef, 0xba, 0x11, 0x7b, 0x58,
++      0xee, 0x15, 0x3e, 0x7b, 0x65, 0x7f, 0x03, 0xaf, 0x10, 0xaf, 0x46, 0x5e,
++      0xf5, 0x18, 0xd8, 0xab, 0x97, 0xce, 0x61, 0x78, 0xd0, 0x30, 0x24, 0xf8,
++      0xa2, 0xe2, 0x8e, 0x76, 0x05, 0xc6, 0xd5, 0x6c, 0x73, 0xe1, 0x87, 0x61,
++      0x4d, 0xc3, 0x1f, 0xd0, 0xef, 0x1f, 0x38, 0x53, 0xe7, 0xed, 0xc7, 0x0f,
++      0x6f, 0xfa, 0xfb, 0xae, 0xfd, 0x2c, 0x28, 0x48, 0x3b, 0xef, 0x12, 0x33,
++      0xc4, 0x86, 0x7e, 0x17, 0x9e, 0x95, 0xf5, 0xfe, 0xdb, 0x67, 0x2b, 0x70,
++      0xde, 0xbe, 0x2e, 0x5a, 0x77, 0x47, 0x9e, 0x36, 0xb1, 0xc3, 0x3d, 0x3b,
++      0x22, 0xb9, 0x4e, 0xa4, 0x2b, 0x47, 0xfd, 0xf4, 0x33, 0x87, 0xb9, 0x87,
++      0x38, 0xb1, 0x3d, 0x13, 0xb1, 0x2c, 0xb6, 0xe5, 0x23, 0x36, 0x3c, 0x30,
++      0xe8, 0x97, 0xf5, 0x6e, 0xcd, 0xa7, 0xcf, 0xc3, 0x3b, 0x39, 0xb1, 0xf9,
++      0x2a, 0x1c, 0xce, 0x86, 0x71, 0xca, 0xfd, 0x5c, 0xcd, 0x58, 0xe3, 0xa0,
++      0xd3, 0x98, 0x85, 0xbe, 0x60, 0x15, 0x06, 0x62, 0x37, 0x22, 0x77, 0x07,
++      0x73, 0x6c, 0xfa, 0x58, 0xad, 0xee, 0x47, 0x3a, 0x28, 0xf9, 0x8b, 0x07,
++      0x99, 0xd8, 0xed, 0x38, 0x5e, 0xef, 0xc5, 0x3c, 0x59, 0x6f, 0xe1, 0xb3,
++      0x3d, 0x41, 0x28, 0xf4, 0xbd, 0xa4, 0x8f, 0xb8, 0x34, 0x6b, 0x00, 0x4e,
++      0xad, 0xa9, 0xcb, 0x1e, 0x4c, 0xcf, 0x56, 0xe2, 0x52, 0xcd, 0x44, 0x0d,
++      0xe3, 0x4e, 0x0b, 0xaa, 0xf7, 0xca, 0x5e, 0x40, 0x00, 0xeb, 0x86, 0xaf,
++      0x95, 0xbd, 0x81, 0x98, 0xa6, 0x04, 0x70, 0xef, 0xb0, 0xc4, 0x8f, 0x35,
++      0xa8, 0xd8, 0x5f, 0x8b, 0x2f, 0x66, 0xbd, 0xc4, 0x78, 0xe2, 0x0d, 0xcb,
++      0xed, 0xc9, 0xd4, 0xa1, 0xee, 0xb1, 0x67, 0x9d, 0x30, 0x75, 0x5c, 0xb7,
++      0x57, 0xb0, 0x88, 0xb6, 0x9b, 0xf9, 0x3c, 0x0a, 0x76, 0x33, 0xe5, 0xf6,
++      0x70, 0x7c, 0x21, 0xbc, 0x4b, 0xec, 0xaa, 0x99, 0x08, 0xe3, 0x9d, 0xdd,
++      0x92, 0xab, 0x24, 0xe1, 0x9d, 0xb8, 0x0c, 0x6f, 0xf2, 0xf3, 0x09, 0xa3,
++      0x13, 0xea, 0x44, 0x13, 0x4e, 0x66, 0xba, 0xe0, 0x99, 0xa8, 0x2d, 0x62,
++      0xd8, 0x5e, 0x3f, 0xea, 0x06, 0xf5, 0xd8, 0x34, 0xe7, 0xc8, 0xb7, 0x97,
++      0x04, 0xa7, 0x51, 0xda, 0x3f, 0x6f, 0xdb, 0xc6, 0x85, 0x7d, 0x87, 0xf2,
++      0xd9, 0x15, 0xb1, 0xef, 0xef, 0x3a, 0x4f, 0x04, 0xd9, 0xbf, 0x8e, 0x08,
++      0xfa, 0x62, 0xc7, 0x64, 0x3f, 0x9f, 0xe3, 0x4b, 0x72, 0xee, 0x9f, 0x77,
++      0xe4, 0x5c, 0x88, 0xcf, 0x94, 0x33, 0x19, 0xcf, 0x39, 0xdb, 0x57, 0xcb,
++      0xfd, 0xdb, 0xab, 0x50, 0xcd, 0xc4, 0xc9, 0x14, 0x99, 0x3b, 0x64, 0x6e,
++      0x19, 0x75, 0x3e, 0x4c, 0xe6, 0x3f, 0x3a, 0x8f, 0x9f, 0x2f, 0x8f, 0xa0,
++      0xcf, 0x5d, 0x13, 0xbf, 0xe0, 0xcb, 0x35, 0x9c, 0xbb, 0xf5, 0x25, 0x5f,
++      0x7e, 0xc7, 0x96, 0xf9, 0x93, 0xf3, 0x4b, 0x01, 0x72, 0x30, 0x03, 0xd5,
++      0x9c, 0xbb, 0xf7, 0x6d, 0x28, 0xb7, 0x76, 0x74, 0x63, 0xd6, 0x44, 0x80,
++      0xbe, 0x1e, 0x59, 0x6f, 0xc1, 0x66, 0x5b, 0x1d, 0xa8, 0x62, 0x9d, 0x93,
++      0xb6, 0x87, 0x7e, 0x9e, 0xe0, 0x98, 0x83, 0x70, 0x5c, 0x5e, 0xbf, 0x1a,
++      0xf3, 0xa9, 0xa7, 0xb3, 0xb6, 0x89, 0x79, 0xd4, 0xd3, 0xb4, 0xed, 0x25,
++      0x4e, 0x34, 0x11, 0x0f, 0x34, 0xd4, 0x12, 0x1b, 0x2b, 0x06, 0x1d, 0x1c,
++      0x32, 0xea, 0xc8, 0xf5, 0xc5, 0x4e, 0x3b, 0x10, 0x1e, 0x30, 0x30, 0x6f,
++      0xa0, 0x79, 0xe3, 0x3c, 0x8f, 0x07, 0xc7, 0x7d, 0xc5, 0xd8, 0x93, 0x9b,
++      0x23, 0xfa, 0x91, 0x31, 0xb9, 0xb9, 0xfc, 0x87, 0x60, 0xc0, 0x6a, 0x80,
++      0xb2, 0x0a, 0xc4, 0x8c, 0xcf, 0xb1, 0xad, 0x37, 0xec, 0x57, 0x71, 0xf3,
++      0x84, 0xe0, 0xcb, 0x0f, 0xb1, 0x92, 0xfd, 0x78, 0x97, 0xb8, 0x76, 0x5f,
++      0xf4, 0x1b, 0x1c, 0x6b, 0x13, 0x6e, 0x99, 0x98, 0x3e, 0xd7, 0xe7, 0x8e,
++      0xb3, 0x9c, 0xff, 0xf9, 0x71, 0x5f, 0xb6, 0x7c, 0x06, 0x2d, 0x49, 0x9f,
++      0x91, 0x38, 0xe1, 0x87, 0xf8, 0x4d, 0xb7, 0xbd, 0x0d, 0xc5, 0x78, 0x2e,
++      0x57, 0x59, 0x8f, 0x3b, 0xbd, 0x92, 0x97, 0x17, 0x7d, 0x43, 0xfa, 0xf3,
++      0xbb, 0xca, 0x14, 0x7d, 0x43, 0xfc, 0xe2, 0xcb, 0xae, 0x7e, 0x85, 0x77,
++      0x69, 0xb8, 0x6d, 0xe2, 0x97, 0xc4, 0xc7, 0x48, 0x32, 0x47, 0xcc, 0x7e,
++      0x9d, 0xfa, 0xdd, 0x4e, 0xfd, 0x32, 0x07, 0x60, 0xbc, 0x4a, 0x50, 0x9f,
++      0x3e, 0x72, 0x15, 0x2f, 0x31, 0xd3, 0xa4, 0x2e, 0x41, 0x0c, 0x64, 0xee,
++      0x1e, 0x2c, 0x8e, 0x37, 0x77, 0x7e, 0xfe, 0xd8, 0x96, 0x92, 0xc0, 0x09,
++      0xfb, 0x87, 0x55, 0x72, 0x26, 0xe8, 0xa4, 0xed, 0x3e, 0x97, 0x35, 0xcd,
++      0x19, 0x65, 0x2e, 0xb4, 0xbd, 0xcf, 0x16, 0xfe, 0x5c, 0x49, 0xbb, 0xd6,
++      0x28, 0xaf, 0xa6, 0x84, 0xa9, 0x52, 0x57, 0xf6, 0x60, 0xa5, 0xfd, 0x6e,
++      0xe1, 0x20, 0x78, 0x83, 0x3e, 0x77, 0xc4, 0xa8, 0xc0, 0xa8, 0x3b, 0x17,
++      0x62, 0x8f, 0xc5, 0x76, 0x2f, 0xd8, 0x4d, 0xba, 0xae, 0x74, 0x1e, 0xab,
++      0xba, 0xc8, 0xc9, 0x2e, 0x6d, 0xa3, 0xe2, 0x3f, 0xb1, 0x8d, 0x44, 0xa9,
++      0x8d, 0x8f, 0x3a, 0xe3, 0x06, 0x3c, 0x65, 0x4b, 0xec, 0x97, 0xfd, 0x0f,
++      0x0d, 0x8b, 0x26, 0x04, 0x5f, 0xe8, 0xbb, 0x03, 0xd3, 0x2e, 0xf7, 0xcf,
++      0x41, 0xf6, 0xb6, 0x42, 0xf0, 0x45, 0x35, 0x9c, 0xd2, 0x63, 0x58, 0x58,
++      0x90, 0xfd, 0xa9, 0x7d, 0x75, 0xc2, 0xe1, 0xce, 0xe8, 0xc2, 0x3b, 0x64,
++      0xbe, 0xca, 0xf7, 0xfc, 0xd8, 0xaf, 0x17, 0xfb, 0x9a, 0x54, 0x8b, 0xdc,
++      0xd1, 0x43, 0xee, 0xd8, 0x6b, 0xf8, 0x69, 0x97, 0xad, 0xc1, 0xd9, 0xbf,
++      0x73, 0x2f, 0xab, 0xdc, 0xdf, 0xdf, 0x57, 0xee, 0xc2, 0x7a, 0x5c, 0xf6,
++      0xa2, 0xfd, 0x21, 0x19, 0xd3, 0x5c, 0xa0, 0x41, 0xe2, 0x55, 0x91, 0xa3,
++      0x6e, 0x3d, 0x9f, 0xff, 0x58, 0xca, 0x60, 0xfe, 0x31, 0xd4, 0xeb, 0x0b,
++      0x50, 0xdf, 0x50, 0xc3, 0xb8, 0x1c, 0xed, 0xa2, 0x7b, 0x4b, 0x2c, 0xb3,
++      0x82, 0xa6, 0xe4, 0xbf, 0xc2, 0x5b, 0xa5, 0xcd, 0x7e, 0xa5, 0xaa, 0x20,
++      0xed, 0x1e, 0x54, 0xfc, 0x85, 0x0f, 0x6b, 0x5b, 0xce, 0xfb, 0x4d, 0x9f,
++      0x1b, 0xca, 0x74, 0xbb, 0x7b, 0x8c, 0xcb, 0x86, 0x1c, 0xdc, 0x69, 0x34,
++      0xe1, 0xee, 0x06, 0x69, 0xa3, 0x98, 0xc3, 0x68, 0xea, 0x34, 0x39, 0xdc,
++      0x6f, 0x1c, 0x55, 0x97, 0xcf, 0x3e, 0x78, 0x1e, 0xd3, 0xa7, 0xd7, 0x42,
++      0xc5, 0xd9, 0xeb, 0x24, 0x9f, 0xf1, 0x91, 0x7f, 0x6d, 0xaa, 0x2e, 0xee,
++      0x2f, 0x8b, 0x1d, 0x4b, 0x3f, 0xfc, 0xf4, 0xb3, 0x0b, 0xfd, 0xd8, 0xf6,
++      0x07, 0xf5, 0xc3, 0x8f, 0x9b, 0x86, 0x92, 0x18, 0x35, 0x4e, 0x38, 0x56,
++      0x68, 0x66, 0xdb, 0x3e, 0xac, 0x1c, 0xfa, 0x8d, 0x33, 0xcb, 0x6d, 0x5b,
++      0x27, 0xa7, 0x52, 0xf1, 0xc0, 0x12, 0x1f, 0x6e, 0x1d, 0x89, 0x62, 0xc5,
++      0x90, 0x8a, 0xd8, 0x12, 0xe9, 0x43, 0x14, 0x5d, 0x23, 0xbb, 0xbd, 0xc5,
++      0xf2, 0xc0, 0x2d, 0x1c, 0xc3, 0x1b, 0x46, 0x0d, 0x7e, 0x40, 0x0c, 0xac,
++      0x75, 0xb9, 0xfd, 0x46, 0x25, 0x23, 0xdc, 0xde, 0xa7, 0x62, 0xb6, 0x8e,
++      0x60, 0x83, 0x99, 0xa4, 0xee, 0x3a, 0x95, 0xc7, 0x72, 0x1b, 0x95, 0xa1,
++      0x7c, 0xb9, 0xef, 0x01, 0x7c, 0xa2, 0x10, 0xc4, 0x27, 0xc6, 0x1a, 0x78,
++      0x85, 0x78, 0x35, 0xf2, 0x7a, 0xf1, 0xfc, 0xb8, 0xca, 0x67, 0x3c, 0x9f,
++      0x65, 0x4e, 0xb1, 0xcd, 0xf5, 0x4b, 0x89, 0x0b, 0x9a, 0x9c, 0xd5, 0xc1,
++      0x5b, 0x59, 0xc9, 0x27, 0xb6, 0xd1, 0x86, 0x65, 0x4d, 0xb8, 0x92, 0x39,
++      0x45, 0x24, 0x36, 0x85, 0xbf, 0xaa, 0x2e, 0xce, 0x7d, 0xd1, 0x86, 0x71,
++      0xde, 0x86, 0x7d, 0x78, 0x3b, 0xab, 0xa2, 0x25, 0xfe, 0x6f, 0xce, 0xf1,
++      0xa0, 0xe0, 0xc9, 0xa5, 0xcf, 0xcb, 0x9c, 0x65, 0xfa, 0x5c, 0x36, 0xd3,
++      0x34, 0x63, 0x5f, 0x56, 0x41, 0xc5, 0x90, 0xf0, 0xf3, 0xeb, 0x5c, 0xbe,
++      0xf7, 0x7d, 0xc3, 0x07, 0xef, 0xd0, 0xa1, 0x2b, 0xe5, 0x68, 0x93, 0x6f,
++      0x8c, 0x71, 0xab, 0x83, 0xf3, 0x32, 0xf2, 0xf1, 0x92, 0xce, 0xca, 0xba,
++      0x50, 0xdc, 0x35, 0x49, 0xd5, 0x8d, 0xe9, 0x41, 0xa8, 0x63, 0xc2, 0x43,
++      0xc9, 0x0d, 0xc6, 0x24, 0x1f, 0x08, 0xf1, 0xbf, 0xe4, 0x06, 0x8d, 0xfc,
++      0xcf, 0xc4, 0xa2, 0x51, 0xe2, 0x78, 0x0f, 0xfa, 0x19, 0x9f, 0x2a, 0xa3,
++      0x3d, 0xd8, 0x3e, 0xfe, 0x61, 0x31, 0xbf, 0x98, 0x63, 0x3d, 0x7b, 0xde,
++      0xcf, 0xdc, 0x39, 0x62, 0x9f, 0xa6, 0xcf, 0x89, 0xcf, 0xc8, 0x5c, 0xed,
++      0xcb, 0x4a, 0x1f, 0x1c, 0x6c, 0x30, 0x6e, 0x64, 0xdb, 0x3e, 0xa8, 0x0d,
++      0x33, 0xb9, 0xe7, 0x79, 0x3e, 0x4d, 0xdd, 0x6d, 0x54, 0x46, 0x39, 0x27,
++      0x96, 0xb7, 0x52, 0xd6, 0x87, 0x82, 0x15, 0x9c, 0x93, 0xaf, 0xe4, 0x45,
++      0x46, 0xa7, 0x32, 0x9e, 0x9b, 0x59, 0x67, 0xa3, 0x32, 0x96, 0xff, 0x55,
++      0xb5, 0xac, 0x99, 0x5f, 0xd0, 0x4d, 0xb9, 0x0f, 0x62, 0x63, 0x1a, 0xea,
++      0xd3, 0xa2, 0x67, 0x19, 0xb3, 0x06, 0x2f, 0x79, 0x5c, 0x7d, 0xe1, 0x43,
++      0xdb, 0x6c, 0xac, 0x72, 0xcf, 0x62, 0xc6, 0x18, 0x8b, 0x02, 0x56, 0x25,
++      0x39, 0x1f, 0x6d, 0x34, 0xe5, 0x33, 0xbb, 0x3a, 0xf7, 0xd9, 0x0b, 0x83,
++      0x87, 0x4b, 0x6b, 0x11, 0x6b, 0x21, 0xbc, 0x54, 0x71, 0x71, 0xd6, 0xa3,
++      0x47, 0xb1, 0x9c, 0xb9, 0xee, 0x4d, 0xb9, 0x62, 0x7f, 0xc7, 0xd8, 0xdf,
++      0x29, 0xd7, 0xf7, 0x92, 0xca, 0x68, 0x5e, 0x75, 0xfb, 0xed, 0x35, 0xa5,
++      0xbf, 0x52, 0x97, 0xe3, 0xc9, 0xbf, 0x56, 0xca, 0xa9, 0x92, 0x18, 0xcc,
++      0xcc, 0xf4, 0x61, 0xe9, 0x73, 0x2d, 0xda, 0x86, 0x3e, 0xa0, 0x9f, 0xc9,
++      0xbc, 0x0a, 0xfe, 0xcc, 0xc3, 0xca, 0x91, 0x59, 0x68, 0x1d, 0x0a, 0xe3,
++      0xb6, 0x91, 0x06, 0x2c, 0xda, 0xb5, 0x06, 0xd5, 0x63, 0x41, 0x5c, 0xb9,
++      0x4b, 0xd6, 0xf8, 0x57, 0xa3, 0xb2, 0x70, 0x5b, 0x8d, 0xe4, 0xb8, 0x7a,
++      0x3a, 0xc1, 0xf9, 0x4b, 0xa0, 0x22, 0x1d, 0x49, 0x24, 0x21, 0x6b, 0xa4,
++      0x26, 0x2a, 0x0a, 0x26, 0xf9, 0xa4, 0xb3, 0x79, 0xbe, 0xe9, 0x73, 0xcf,
++      0x9b, 0x2d, 0x2b, 0xd0, 0xe6, 0x39, 0x6e, 0x1f, 0x2f, 0x4f, 0xda, 0x71,
++      0xce, 0x5e, 0x87, 0xcd, 0x35, 0x66, 0x13, 0x3c, 0x85, 0xcb, 0x91, 0x1c,
++      0x69, 0xc3, 0xbc, 0x42, 0x03, 0x3a, 0x47, 0x42, 0x88, 0xa5, 0xc5, 0xc7,
++      0x23, 0x5a, 0x4a, 0xed, 0x80, 0xbf, 0xc0, 0x78, 0x9a, 0xfe, 0x8d, 0xf3,
++      0x16, 0xed, 0xa0, 0x87, 0xfa, 0xba, 0x26, 0xdd, 0x85, 0xba, 0x42, 0x00,
++      0x57, 0x0f, 0x7d, 0x02, 0xb5, 0x23, 0x7e, 0xcc, 0x1a, 0xd2, 0x90, 0x5f,
++      0xe2, 0x47, 0x60, 0x24, 0x8c, 0xea, 0xb4, 0xde, 0x75, 0x9b, 0x82, 0xe4,
++      0xc2, 0x25, 0x61, 0xb6, 0x4d, 0x7b, 0xa3, 0x7f, 0x8d, 0x90, 0x7f, 0x2d,
++      0xef, 0x06, 0x36, 0xa7, 0x05, 0x1b, 0x45, 0x27, 0x9f, 0x72, 0xcf, 0x9f,
++      0xac, 0x4b, 0x7f, 0x18, 0xce, 0x95, 0xed, 0x5b, 0xfc, 0xdc, 0x72, 0xcf,
++      0xc4, 0x32, 0x07, 0x52, 0xa6, 0x5b, 0xf4, 0xec, 0x3c, 0xde, 0xfb, 0x39,
++      0xe3, 0xf3, 0x43, 0xe9, 0x80, 0x55, 0x6b, 0x6e, 0xc6, 0x55, 0xed, 0x11,
++      0xab, 0xa0, 0xbc, 0xca, 0xf1, 0xff, 0x90, 0x41, 0xbb, 0x89, 0xfd, 0xfc,
++      0x63, 0xe5, 0x5f, 0xba, 0xce, 0xb6, 0xe4, 0xa2, 0xf5, 0xb9, 0x23, 0xcc,
++      0xe7, 0xa7, 0x2e, 0x5a, 0x9f, 0x13, 0xbc, 0x2f, 0x9f, 0x83, 0x90, 0xb9,
++      0xd2, 0x66, 0xd8, 0xb7, 0xac, 0x17, 0x09, 0x36, 0xca, 0x7c, 0x95, 0xd7,
++      0x8b, 0x7c, 0x58, 0x3e, 0x24, 0xb9, 0x92, 0xca, 0x3c, 0xa1, 0x05, 0xc9,
++      0xd0, 0xa3, 0x9c, 0x03, 0x77, 0x4d, 0x89, 0xf7, 0x06, 0xf8, 0x59, 0xd6,
++      0x7b, 0x34, 0xe2, 0x8f, 0x56, 0xca, 0x0b, 0xaa, 0x70, 0xeb, 0x50, 0x83,
++      0xbb, 0x1f, 0xb5, 0x22, 0x7e, 0x39, 0x62, 0xf5, 0x5f, 0x62, 0x99, 0x0b,
++      0x6b, 0x43, 0x57, 0x31, 0xdf, 0xa8, 0x71, 0xcf, 0x4a, 0x2c, 0xa3, 0xbe,
++      0x2f, 0x47, 0xdb, 0x48, 0x11, 0xcf, 0x6e, 0x1b, 0x29, 0xe2, 0x56, 0x5a,
++      0x6c, 0xce, 0x57, 0xb4, 0xb9, 0x2c, 0x6d, 0x2e, 0xa8, 0x77, 0x2a, 0xd9,
++      0xdc, 0x47, 0xc5, 0x13, 0x04, 0xeb, 0xcc, 0xf2, 0x99, 0x6a, 0x62, 0x5e,
++      0xfe, 0x48, 0xcd, 0x1f, 0x16, 0x7f, 0x2e, 0xd5, 0xd9, 0xb5, 0x7f, 0xa4,
++      0xce, 0xca, 0x31, 0xeb, 0x82, 0xce, 0x06, 0x2f, 0xd1, 0xd9, 0x02, 0xea,
++      0xa0, 0x41, 0x2f, 0xea, 0x6d, 0xb9, 0x71, 0x19, 0x52, 0xae, 0xde, 0xaa,
++      0x64, 0x6d, 0x8c, 0xf7, 0x04, 0xaf, 0xe7, 0xe0, 0xfb, 0xc1, 0x2f, 0xb9,
++      0xf7, 0x16, 0x51, 0x27, 0x45, 0x7d, 0x05, 0xa9, 0xaf, 0x0b, 0xb1, 0x00,
++      0xea, 0x07, 0xcc, 0xa7, 0x8a, 0xb1, 0x40, 0x74, 0xf7, 0xda, 0xa0, 0x86,
++      0xba, 0xeb, 0x2e, 0xc7, 0x2b, 0x7b, 0xab, 0xd0, 0x3e, 0xe2, 0xa3, 0x7f,
++      0x49, 0x7c, 0x28, 0xc6, 0xa4, 0xd6, 0x11, 0x77, 0x3f, 0x8a, 0xf8, 0xda,
++      0x10, 0xf8, 0xc3, 0x63, 0xb0, 0x8c, 0x47, 0xce, 0xe5, 0xc9, 0xb9, 0x39,
++      0x19, 0x97, 0x3e, 0xc3, 0x16, 0x1c, 0xe7, 0x19, 0xce, 0x77, 0xaa, 0x21,
++      0x92, 0x95, 0xf5, 0xa6, 0x2c, 0x39, 0x99, 0x27, 0x2d, 0x3a, 0x13, 0xbe,
++      0xad, 0xde, 0xe8, 0x81, 0xda, 0xe6, 0xc1, 0x66, 0x9c, 0x32, 0xf4, 0xfe,
++      0x7b, 0xf1, 0x27, 0xe8, 0x0d, 0x39, 0xd8, 0x6f, 0xac, 0x64, 0x3e, 0x51,
++      0x8d, 0xf5, 0x6d, 0x34, 0xcf, 0x3b, 0x3a, 0x88, 0x09, 0x56, 0x8f, 0x07,
++      0xb2, 0x9e, 0xbb, 0xf1, 0x2e, 0x3b, 0x1a, 0xe9, 0x7e, 0x50, 0x01, 0x56,
++      0x0c, 0xf8, 0xa1, 0x29, 0x2e, 0xdf, 0x89, 0x0d, 0xa9, 0xb2, 0xb6, 0xfc,
++      0x2f, 0x15, 0xc5, 0xb3, 0x10, 0x2a, 0xb4, 0x46, 0x69, 0x67, 0x25, 0xac,
++      0xc9, 0x0e, 0x17, 0x4f, 0x6a, 0x16, 0x2a, 0xb8, 0x75, 0x61, 0xc4, 0x4a,
++      0x29, 0x8e, 0xb3, 0x2a, 0xee, 0x75, 0x9f, 0xef, 0x98, 0x6c, 0x4d, 0xdd,
++      0xa9, 0xfe, 0x8b, 0x63, 0xb9, 0xeb, 0xd9, 0x91, 0x60, 0x52, 0x65, 0x9f,
++      0x3f, 0xf2, 0xac, 0xa2, 0x8c, 0x93, 0x5c, 0x9c, 0xbc, 0xfb, 0xc9, 0xd2,
++      0xfa, 0xaf, 0xcf, 0x5c, 0xff, 0x17, 0xfb, 0x75, 0xc9, 0xf7, 0xbe, 0xe4,
++      0x9e, 0xfb, 0xc8, 0x66, 0x64, 0xfd, 0xf0, 0xe1, 0x00, 0xaa, 0x57, 0xa2,
++      0x77, 0xf2, 0x3a, 0x4c, 0xb4, 0xfd, 0xab, 0x93, 0x2b, 0xf6, 0x5d, 0xcc,
++      0xd0, 0x3f, 0xcf, 0xcc, 0xdd, 0x75, 0x7d, 0x4b, 0x84, 0x1c, 0x5c, 0xce,
++      0x7a, 0x92, 0x0b, 0x2b, 0x45, 0x1e, 0x3e, 0x5f, 0xbf, 0x09, 0xcf, 0x5e,
++      0x24, 0x53, 0xd6, 0x12, 0xca, 0x32, 0x77, 0x51, 0x9e, 0xc8, 0x65, 0x3c,
++      0xd0, 0xff, 0xcd, 0x19, 0x09, 0xcd, 0x2c, 0x17, 0xab, 0x2a, 0xc6, 0x2a,
++      0x29, 0x57, 0x6e, 0xb7, 0x82, 0xf5, 0xde, 0x77, 0x46, 0x2f, 0x2a, 0xf7,
++      0xd3, 0x52, 0xb9, 0x67, 0x02, 0x72, 0x66, 0x24, 0x9b, 0x11, 0xce, 0x7a,
++      0xca, 0x19, 0xbb, 0xa8, 0x4c, 0x4b, 0xf5, 0xc5, 0x65, 0x9a, 0x89, 0xd1,
++      0xff, 0xaf, 0x33, 0x7e, 0x51, 0x99, 0xe4, 0x25, 0x65, 0x16, 0x10, 0x13,
++      0xbf, 0xef, 0xec, 0xbb, 0xa8, 0x4c, 0xed, 0x25, 0x65, 0x16, 0xd3, 0x1e,
++      0x9f, 0x71, 0x0e, 0x5c, 0x54, 0x66, 0xcc, 0x7f, 0x71, 0x19, 0xd9, 0xe3,
++      0x58, 0xff, 0x17, 0x5b, 0xf4, 0x75, 0x25, 0x9f, 0xbb, 0x70, 0xbf, 0x58,
++      0xfe, 0xf1, 0x4b, 0xfa, 0x1f, 0xb1, 0x64, 0xbe, 0x7d, 0xed, 0xe5, 0xf9,
++      0x7e, 0xb8, 0x74, 0xff, 0x7b, 0x35, 0x17, 0x97, 0xbb, 0x22, 0x70, 0x69,
++      0x3b, 0x45, 0x79, 0x47, 0x2f, 0x69, 0xff, 0xe6, 0xca, 0x8b, 0xbf, 0xbf,
++      0x5d, 0x51, 0xfc, 0x5e, 0xd6, 0xe9, 0xa1, 0x4b, 0x9e, 0xff, 0x7d, 0xc5,
++      0xc5, 0xdf, 0x37, 0x54, 0x7e, 0x78, 0x3b, 0xb5, 0x97, 0xb4, 0xa3, 0xf4,
++      0xca, 0xbb, 0x38, 0x1e, 0x53, 0xad, 0xed, 0xed, 0x58, 0x7f, 0x43, 0x2a,
++      0xbf, 0x89, 0xf6, 0x29, 0xb6, 0xf5, 0xe0, 0x0d, 0x6b, 0xf3, 0x6f, 0xcd,
++      0xe0, 0xb1, 0xcb, 0xc2, 0x41, 0x7c, 0x1c, 0x6b, 0xdd, 0xbd, 0x34, 0x95,
++      0x38, 0x69, 0xb9, 0xb6, 0x40, 0x8e, 0xe9, 0x57, 0xcc, 0x14, 0x0c, 0xf7,
++      0xbc, 0xe5, 0x3a, 0x34, 0xe7, 0xdd, 0x3d, 0xbb, 0x58, 0x0a, 0xcf, 0xaa,
++      0x5d, 0xba, 0x55, 0x3a, 0x47, 0x67, 0x5d, 0x1f, 0x44, 0x72, 0x66, 0x7e,
++      0xaa, 0x8d, 0x23, 0x12, 0xde, 0x86, 0x75, 0xee, 0x59, 0x6b, 0xc5, 0xec,
++      0x29, 0x9d, 0xd7, 0x5c, 0x03, 0x3d, 0x5f, 0xe6, 0x4d, 0xb2, 0x9e, 0x2b,
++      0xe7, 0x19, 0x1c, 0xfa, 0xa0, 0xc4, 0xf9, 0x83, 0x8a, 0x3a, 0xe0, 0xae,
++      0x99, 0xae, 0xf6, 0x20, 0x9a, 0xe8, 0x54, 0x90, 0xaa, 0x32, 0xa3, 0xda,
++      0xdb, 0x25, 0x4c, 0xf3, 0x4d, 0x6c, 0x51, 0x2a, 0x26, 0xfa, 0x15, 0xef,
++      0x44, 0x11, 0xd3, 0x3c, 0x13, 0xb2, 0xb6, 0xd0, 0xc0, 0x32, 0x41, 0xb4,
++      0x2c, 0xf1, 0xe2, 0x3b, 0x76, 0xad, 0xfb, 0x1e, 0xc7, 0xd6, 0x25, 0x15,
++      0x78, 0x20, 0xae, 0xa0, 0xeb, 0xaa, 0xc3, 0x78, 0x2b, 0x2f, 0xeb, 0x6c,
++      0x56, 0x7c, 0x94, 0x6d, 0x1e, 0xb2, 0x65, 0xbd, 0x74, 0x4b, 0x7c, 0xc4,
++      0x6d, 0xff, 0xf3, 0xe8, 0x73, 0xf7, 0xad, 0xba, 0x9d, 0xed, 0x99, 0x1e,
++      0x67, 0x1b, 0x73, 0x8d, 0x82, 0xdd, 0x90, 0xaa, 0x63, 0xfd, 0xb7, 0x96,
++      0xac, 0xc7, 0x69, 0x96, 0x99, 0xb0, 0x1f, 0xc4, 0xfb, 0xf9, 0x20, 0xf2,
++      0xf6, 0x4a, 0x7c, 0x37, 0x1f, 0x60, 0xce, 0xd7, 0x85, 0xef, 0xe4, 0x57,
++      0xe3, 0xc5, 0x61, 0xf7, 0x7d, 0x29, 0x2c, 0xb3, 0x15, 0xac, 0x88, 0xae,
++      0xc6, 0xb1, 0xd1, 0xd5, 0x38, 0x3c, 0x2c, 0xef, 0x0e, 0xcc, 0x25, 0x8f,
++      0x2c, 0xda, 0x9b, 0x4a, 0x8c, 0x59, 0x66, 0xaf, 0xc2, 0xa1, 0xd1, 0x30,
++      0x73, 0x29, 0x03, 0x27, 0xf3, 0x21, 0x8c, 0xd8, 0x6d, 0x38, 0x91, 0x0f,
++      0xe3, 0xeb, 0x76, 0x02, 0x67, 0xf9, 0xfd, 0xa0, 0x2d, 0x9c, 0xa5, 0x03,
++      0xd3, 0xf9, 0x6f, 0x32, 0xcf, 0x99, 0x87, 0x23, 0xdd, 0xcf, 0x30, 0x1c,
++      0x1d, 0xe4, 0xd5, 0x85, 0x13, 0xa3, 0x5d, 0x38, 0x35, 0x7c, 0x2b, 0x4e,
++      0x8d, 0xfe, 0x18, 0x6f, 0x0d, 0x4b, 0x7f, 0xe5, 0xfc, 0xb7, 0xc8, 0xd5,
++      0x29, 0x77, 0x35, 0xa6, 0x46, 0xff, 0x18, 0xd9, 0xef, 0x3a, 0x47, 0x56,
++      0x8b, 0xdc, 0x67, 0x7e, 0x87, 0x6c, 0xd1, 0xa5, 0x60, 0xbf, 0x1f, 0xc7,
++      0x6c, 0x3f, 0x8e, 0xda, 0x53, 0x57, 0x56, 0x61, 0xea, 0x7a, 0x22, 0x1d,
++      0xb6, 0xe7, 0x2b, 0xf1, 0x5c, 0x56, 0xd6, 0xd8, 0x3e, 0x86, 0x64, 0x70,
++      0x23, 0xb6, 0x4e, 0x56, 0xe2, 0x3b, 0x59, 0x3f, 0x75, 0x7c, 0x3d, 0x92,
++      0xf5, 0xab, 0xa9, 0xbf, 0x00, 0x5e, 0xb2, 0x43, 0x78, 0xd9, 0x6e, 0x4d,
++      0x15, 0x94, 0x76, 0x58, 0x2e, 0xfe, 0x07, 0xa8, 0xef, 0x0d, 0x6e, 0x9f,
++      0xbe, 0x63, 0x77, 0x3b, 0x5b, 0xa9, 0xe3, 0xfe, 0xcc, 0xe7, 0xdd, 0xb3,
++      0xdb, 0x2f, 0xda, 0xd3, 0x8e, 0xbc, 0x93, 0xf1, 0x14, 0x75, 0x7a, 0xcc,
++      0x4e, 0x91, 0xdb, 0x35, 0x71, 0x8e, 0xa6, 0x30, 0x4a, 0xbb, 0x3c, 0x99,
++      0xd5, 0x8f, 0xae, 0xc5, 0x26, 0x9c, 0xcd, 0x55, 0xe2, 0x35, 0xb6, 0x51,
++      0xb7, 0xd8, 0x8b, 0xe3, 0xae, 0xbc, 0x4d, 0x78, 0x3f, 0xab, 0x30, 0xde,
++      0x6e, 0xc2, 0x7b, 0x7c, 0xf6, 0x0a, 0x3f, 0x9f, 0x8e, 0xb3, 0x87, 0xa5,
++      0x67, 0xa7, 0xc8, 0xcf, 0x65, 0xcd, 0xa8, 0xb7, 0x63, 0x13, 0x4e, 0xe4,
++      0xde, 0x23, 0xa7, 0x75, 0xf0, 0x45, 0x63, 0x36, 0x12, 0xb3, 0xc9, 0x9b,
++      0xf4, 0x4a, 0x1c, 0xe3, 0xf3, 0x85, 0xc4, 0xdf, 0xe2, 0xfa, 0xd9, 0x26,
++      0xbc, 0xcb, 0xf1, 0x3c, 0x40, 0x59, 0xef, 0xe4, 0xfe, 0x96, 0x72, 0x97,
++      0x22, 0x1f, 0xff, 0x5b, 0xca, 0xfd, 0x31, 0xc6, 0x4b, 0xfa, 0x38, 0x61,
++      0xc8, 0xb8, 0xbe, 0x31, 0x0b, 0xd5, 0x21, 0x8e, 0xe3, 0x9b, 0xfc, 0xbf,
++      0x01, 0xc7, 0xf3, 0xff, 0x9b, 0xff, 0xbf, 0x8b, 0x03, 0x79, 0x59, 0xaf,
++      0x9e, 0x19, 0x4b, 0xc5, 0x7f, 0xca, 0x1c, 0x64, 0x0e, 0x32, 0x83, 0xb5,
++      0xa9, 0xd9, 0xb4, 0xa3, 0xbf, 0xbe, 0xb6, 0x0e, 0xef, 0xc6, 0x2d, 0xec,
++      0xd8, 0xe7, 0x45, 0x86, 0xb8, 0xbb, 0x63, 0xa0, 0x01, 0x4f, 0xec, 0x0c,
++      0xe2, 0xf1, 0x9d, 0x97, 0x61, 0xcb, 0xce, 0x2b, 0xb0, 0x67, 0x67, 0x13,
++      0xd2, 0x3b, 0x1d, 0xe7, 0xfd, 0xc5, 0x8e, 0xb3, 0x88, 0xd7, 0x23, 0xf4,
++      0x05, 0x3f, 0xff, 0xbf, 0x10, 0x17, 0x3f, 0xd1, 0x71, 0x95, 0xeb, 0x2f,
++      0x9d, 0xb8, 0xd2, 0xfd, 0x9f, 0xc4, 0xa2, 0xfc, 0xc6, 0xf8, 0xfa, 0xc2,
++      0xa6, 0xf8, 0x7d, 0x85, 0x39, 0xd8, 0x3a, 0xd8, 0x88, 0xc1, 0x9d, 0x0d,
++      0xa9, 0x06, 0xb6, 0xb3, 0xea, 0x5a, 0xe1, 0x76, 0x8e, 0x63, 0xb4, 0xf7,
++      0xc7, 0xd7, 0x16, 0x9e, 0x41, 0x77, 0x21, 0x84, 0xbe, 0xc1, 0x30, 0xdb,
++      0x92, 0xbd, 0x5c, 0xef, 0xd1, 0x7b, 0xe1, 0x38, 0xd3, 0x8b, 0x0f, 0xe2,
++      0xae, 0xc2, 0x37, 0xc9, 0x1b, 0x43, 0x48, 0x0f, 0xae, 0x47, 0x66, 0xb2,
++      0x22, 0xe5, 0x37, 0x1d, 0xbc, 0x14, 0x9f, 0xc2, 0xed, 0x94, 0xf7, 0xe8,
++      0x60, 0x2d, 0xfb, 0x54, 0x9d, 0xaa, 0x34, 0x25, 0x86, 0x3f, 0xc8, 0x18,
++      0x25, 0xfc, 0xe2, 0x28, 0x56, 0x30, 0xbf, 0xaa, 0x5f, 0xa2, 0xcf, 0x42,
++      0x6d, 0xd0, 0x7b, 0xa6, 0x43, 0xec, 0x2f, 0x45, 0xfb, 0x93, 0x7d, 0xf5,
++      0x75, 0xb8, 0xdb, 0x3d, 0xe7, 0xdd, 0x83, 0xe7, 0x6d, 0xc1, 0x9d, 0x35,
++      0xd8, 0x6f, 0xaf, 0x63, 0xce, 0x25, 0xf1, 0x7a, 0x25, 0x9a, 0x0b, 0x7f,
++      0x17, 0xbf, 0xa7, 0xb0, 0x9a, 0x7c, 0xf6, 0x5f, 0x70, 0x53, 0x21, 0xc7,
++      0x7e, 0x8d, 0xc6, 0xef, 0x2e, 0xec, 0x89, 0xdf, 0x5b, 0xe8, 0xc2, 0x02,
++      0x37, 0xa7, 0x64, 0xfe, 0x55, 0x90, 0x38, 0x77, 0x9c, 0x5c, 0xf8, 0x14,
++      0x96, 0x17, 0x5e, 0xc3, 0xcd, 0x05, 0xc1, 0x0d, 0x89, 0x7f, 0x2f, 0x7a,
++      0x51, 0x2d, 0x71, 0xef, 0x0b, 0xd8, 0xba, 0x3b, 0x85, 0xbe, 0xdd, 0x65,
++      0x8c, 0x6a, 0x0d, 0xee, 0x13, 0x7c, 0x99, 0xf4, 0x95, 0x62, 0xd4, 0xa7,
++      0x68, 0x8f, 0x2a, 0x63, 0xa3, 0xac, 0xd3, 0xaf, 0xa3, 0x2f, 0x6f, 0x24,
++      0x66, 0xca, 0x7a, 0xfc, 0x27, 0x4b, 0xf7, 0x25, 0xd6, 0xcb, 0x5a, 0xbc,
++      0x86, 0x43, 0x79, 0x77, 0x4f, 0x5b, 0xf3, 0xeb, 0xb7, 0xf3, 0x99, 0xd4,
++      0xff, 0x02, 0xd2, 0xbb, 0x57, 0x3b, 0x8f, 0x66, 0x8a, 0xfb, 0x66, 0x47,
++      0xa2, 0x6c, 0x6b, 0x9c, 0xb1, 0x7d, 0x2f, 0xfc, 0xb3, 0x38, 0xb6, 0x89,
++      0x01, 0x58, 0x1e, 0xbd, 0xdb, 0xd9, 0x92, 0xc1, 0xbd, 0xb3, 0x10, 0xc6,
++      0xca, 0x89, 0x0a, 0x24, 0xf7, 0x57, 0xe3, 0xb6, 0x9d, 0x3d, 0xb4, 0x65,
++      0x8b, 0xf6, 0xab, 0x1b, 0x77, 0x2b, 0xd5, 0xb8, 0x99, 0xf7, 0x3e, 0x3d,
++      0x28, 0x6b, 0x58, 0xd1, 0xa3, 0x27, 0x3c, 0xd5, 0xb8, 0x6b, 0xaf, 0x1f,
++      0xb9, 0xdc, 0x4a, 0x24, 0xf7, 0x1e, 0x81, 0x95, 0xa3, 0x4d, 0xee, 0x22,
++      0xce, 0x30, 0xcd, 0x51, 0xcd, 0x1f, 0x63, 0xcf, 0xa8, 0x8a, 0xba, 0x5d,
++      0xb2, 0xfe, 0xa8, 0xe8, 0xa7, 0xa3, 0x05, 0xa4, 0x47, 0xbd, 0x98, 0x95,
++      0xee, 0xc4, 0x04, 0xb1, 0x26, 0x90, 0x4e, 0x22, 0x9f, 0xef, 0x46, 0x8e,
++      0x58, 0x92, 0x1b, 0x0d, 0xa0, 0x26, 0x6d, 0x20, 0xa0, 0xc7, 0xb0, 0x83,
++      0xfe, 0x52, 0x91, 0xd6, 0xb1, 0x2d, 0x7f, 0x23, 0xac, 0xd1, 0x4f, 0x60,
++      0xfb, 0x68, 0x37, 0x2f, 0x13, 0x7d, 0xa3, 0x9f, 0xc7, 0xb2, 0x89, 0xa3,
++      0xe8, 0xcf, 0xa7, 0x68, 0x8f, 0xef, 0x61, 0x7b, 0xee, 0x30, 0x9e, 0xc8,
++      0x6e, 0xc6, 0xd9, 0xc5, 0x87, 0xf1, 0x38, 0x3f, 0x67, 0xb3, 0xfa, 0xc6,
++      0xb0, 0x7a, 0x18, 0x99, 0xdc, 0x26, 0x7c, 0x62, 0x50, 0xc1, 0x4b, 0xb4,
++      0xf5, 0xdb, 0xf7, 0xd2, 0x16, 0x1f, 0xdb, 0x80, 0xae, 0x89, 0xef, 0xc2,
++      0xce, 0x3f, 0x8f, 0x1d, 0xb9, 0x07, 0xd1, 0x9f, 0x59, 0xcf, 0xfc, 0xff,
++      0x19, 0xca, 0x39, 0x48, 0x3f, 0xdf, 0xc8, 0x31, 0x3e, 0xcc, 0xeb, 0xc2,
++      0x1a, 0xe3, 0x85, 0x35, 0x39, 0xfa, 0x7d, 0x46, 0x72, 0xcf, 0x75, 0xc4,
++      0x89, 0x27, 0x6b, 0x65, 0x5d, 0xb2, 0x4a, 0x9f, 0xb9, 0x56, 0x2f, 0xb6,
++      0x1f, 0x76, 0x73, 0xed, 0xaa, 0xb4, 0xe4, 0x75, 0x53, 0x91, 0x2a, 0x72,
++      0x0c, 0x7f, 0x5a, 0x74, 0xd8, 0xe3, 0xf4, 0x66, 0x04, 0x4b, 0x64, 0x3e,
++      0x34, 0xbc, 0x90, 0xff, 0x31, 0xb6, 0x0e, 0xcf, 0xc6, 0xf2, 0x6c, 0x1b,
++      0x39, 0xa5, 0xe3, 0x7c, 0x85, 0xbe, 0x66, 0x93, 0xeb, 0xec, 0x18, 0x4c,
++      0x12, 0x53, 0x66, 0x23, 0x39, 0xa7, 0xc8, 0x4f, 0xc2, 0x69, 0x69, 0xcb,
++      0x57, 0xda, 0xab, 0x9b, 0xba, 0x32, 0xcc, 0x7b, 0x75, 0x69, 0x99, 0xb7,
++      0x88, 0xa1, 0xb9, 0xfb, 0x69, 0x8e, 0xf3, 0x52, 0xb4, 0xcc, 0x95, 0xa6,
++      0xae, 0xac, 0xc3, 0x6c, 0x59, 0x77, 0x4d, 0xc8, 0x39, 0xdf, 0x6f, 0xb5,
++      0x2c, 0xa7, 0xaf, 0x7e, 0x01, 0x03, 0xe3, 0xe5, 0x77, 0x23, 0xff, 0xb3,
++      0xe4, 0xdd, 0xf5, 0x9f, 0x2c, 0xaf, 0xbc, 0x07, 0x2a, 0xe7, 0x8c, 0xcb,
++      0xef, 0x50, 0x8a, 0x2e, 0xaf, 0x90, 0xfd, 0x03, 0xab, 0xb8, 0x4f, 0x0a,
++      0x1c, 0xb1, 0x2b, 0x18, 0x87, 0xd5, 0xa5, 0x64, 0x63, 0x21, 0x1f, 0x2a,
++      0x19, 0x2f, 0x1b, 0xd1, 0x47, 0xbe, 0x7a, 0x93, 0x51, 0x81, 0x03, 0x6d,
++      0x49, 0x39, 0xcf, 0xd7, 0xe3, 0x73, 0x79, 0xea, 0xa6, 0x3f, 0xff, 0x6d,
++      0x9e, 0xba, 0x09, 0xe9, 0x8c, 0x9c, 0x63, 0xeb, 0xc6, 0x4b, 0xf5, 0xf2,
++      0x5e, 0xe7, 0x26, 0xf7, 0x9c, 0x70, 0xd5, 0x42, 0x62, 0x46, 0x5c, 0xc3,
++      0x51, 0xbd, 0x55, 0x6b, 0x50, 0x23, 0x06, 0x94, 0xd7, 0x1d, 0x2b, 0x94,
++      0x44, 0xff, 0xa4, 0x9c, 0xd5, 0xfb, 0xa8, 0x3d, 0x84, 0xb5, 0xd8, 0xfe,
++      0x58, 0x07, 0x8e, 0xaf, 0x96, 0xb5, 0xbc, 0x9f, 0x95, 0xde, 0xdb, 0x93,
++      0x3e, 0x46, 0xea, 0xe4, 0x0c, 0xaa, 0xc8, 0xde, 0x9e, 0x51, 0x19, 0x7b,
++      0xe2, 0x78, 0x3d, 0xe8, 0x8e, 0x37, 0x56, 0x3e, 0x97, 0x59, 0xa9, 0x2f,
++      0x2f, 0x95, 0x5f, 0x50, 0x27, 0xbc, 0x64, 0x5b, 0x66, 0x13, 0xb9, 0xb6,
++      0xf4, 0xe7, 0xd7, 0xce, 0xda, 0x50, 0x03, 0xcb, 0x8e, 0x95, 0x9e, 0x8b,
++      0xad, 0x45, 0x8c, 0x24, 0xe4, 0x9e, 0xd4, 0x11, 0x9d, 0xcd, 0xac, 0xe3,
++      0x41, 0xbd, 0x7e, 0x25, 0x1e, 0xa2, 0x8f, 0xcf, 0xd7, 0x5f, 0x76, 0x36,
++      0xcb, 0x39, 0xcd, 0x85, 0xc1, 0x19, 0x6d, 0x2d, 0x75, 0xfb, 0x52, 0xc9,
++      0xbe, 0x0c, 0x66, 0xe4, 0xbd, 0x81, 0xb3, 0xce, 0xc2, 0x46, 0x79, 0x7e,
++      0x5b, 0x6d, 0x51, 0x7e, 0xb3, 0x7b, 0x0e, 0x7b, 0x4f, 0xa6, 0xdc, 0x6f,
++      0x39, 0xe3, 0x1e, 0x2a, 0xb7, 0x15, 0xbb, 0x30, 0x1e, 0xe9, 0xdb, 0xd7,
++      0x6a, 0x2f, 0xee, 0xf3, 0x9d, 0xb3, 0xca, 0xef, 0x17, 0xcc, 0x73, 0xeb,
++      0x94, 0xdb, 0x94, 0x3e, 0x6e, 0xc2, 0xe3, 0x93, 0x97, 0x8e, 0xf1, 0xee,
++      0x19, 0x63, 0x92, 0x3a, 0x32, 0xae, 0x60, 0xc9, 0x0e, 0x36, 0xb2, 0x8c,
++      0xd4, 0x91, 0x75, 0x82, 0xa0, 0x9b, 0x3f, 0xd4, 0xed, 0x16, 0x79, 0x22,
++      0xc3, 0x71, 0xde, 0x70, 0x63, 0xf2, 0x02, 0xb7, 0xcc, 0xe0, 0xe4, 0x6a,
++      0xfa, 0x91, 0xb3, 0x99, 0xf8, 0xec, 0xbc, 0xd1, 0x11, 0xc6, 0x56, 0x5b,
++      0x74, 0xad, 0x87, 0xc7, 0x88, 0x4d, 0x7d, 0x2e, 0x9f, 0xf1, 0xa1, 0x37,
++      0x57, 0x3e, 0xeb, 0x52, 0x29, 0x7b, 0x21, 0x61, 0xd1, 0x79, 0xaf, 0x41,
++      0x1e, 0x17, 0x5c, 0xa6, 0x79, 0xc9, 0xc5, 0xee, 0xc1, 0x7f, 0xc8, 0xfc,
++      0xc6, 0x7c, 0xa5, 0x75, 0x93, 0x14, 0xed, 0xa8, 0x18, 0x0f, 0x41, 0xfe,
++      0x40, 0x1e, 0x56, 0x3a, 0x43, 0xdf, 0x9b, 0xff, 0x0f, 0x67, 0xca, 0x3d,
++      0x43, 0x7f, 0xe1, 0x2c, 0x4a, 0x2e, 0xe8, 0x38, 0xfb, 0xf8, 0xec, 0xc2,
++      0x79, 0x7a, 0x72, 0x06, 0x5d, 0xce, 0xdd, 0xff, 0x3b, 0xe7, 0x6e, 0x66,
++      0xd9, 0xa9, 0xfa, 0xe2, 0xfb, 0x25, 0x49, 0x75, 0x99, 0x5e, 0xc6, 0x6d,
++      0xd9, 0x27, 0x12, 0xdc, 0x3e, 0x58, 0x57, 0x5c, 0x3f, 0x8e, 0x74, 0x75,
++      0x43, 0xf6, 0xe4, 0xcb, 0x38, 0xa3, 0x1b, 0x8b, 0x94, 0xcd, 0x68, 0x89,
++      0x57, 0xcb, 0xf9, 0xba, 0x88, 0xd7, 0x8c, 0x04, 0xdf, 0x42, 0x34, 0x76,
++      0xd8, 0x3d, 0x43, 0x22, 0xd8, 0xa3, 0xe3, 0x9e, 0xbc, 0x4e, 0x9b, 0x95,
++      0xf7, 0xd2, 0xe5, 0x73, 0xf1, 0xdd, 0xc7, 0x64, 0x5e, 0xb0, 0xba, 0x87,
++      0x58, 0x6d, 0xfd, 0xa5, 0xcf, 0x95, 0x17, 0xe9, 0x19, 0x55, 0x22, 0x5d,
++      0x0f, 0x2a, 0x65, 0x79, 0x81, 0x0f, 0x91, 0x17, 0x63, 0x7d, 0xad, 0xf4,
++      0x2e, 0xb8, 0x4e, 0x19, 0x97, 0x9e, 0x0d, 0x9a, 0x93, 0x92, 0x3c, 0xfa,
++      0x40, 0x89, 0x73, 0x1e, 0xfe, 0xad, 0x3c, 0xfa, 0x43, 0xdb, 0x4c, 0xb2,
++      0xcd, 0xae, 0x6a, 0x25, 0x19, 0x97, 0xf7, 0x80, 0x2a, 0xe3, 0xd1, 0xd8,
++      0x0b, 0x74, 0x72, 0xaf, 0x19, 0x0d, 0x8f, 0xba, 0x67, 0x5d, 0x0c, 0xff,
++      0xf2, 0x7c, 0xd1, 0x7f, 0xac, 0xc9, 0xdf, 0xad, 0x93, 0x1a, 0x5d, 0xef,
++      0x6e, 0x55, 0x92, 0xd7, 0x57, 0x53, 0x4e, 0x2c, 0x0e, 0xad, 0xc2, 0x2c,
++      0xeb, 0x28, 0x1a, 0x7b, 0x8b, 0xf3, 0x79, 0xa8, 0x23, 0x1a, 0x1e, 0x71,
++      0x73, 0x74, 0xd1, 0x8b, 0xe1, 0x2f, 0xce, 0xbd, 0x2e, 0x7c, 0xde, 0xf2,
++      0x31, 0x36, 0x8f, 0xdb, 0x7e, 0x8e, 0xa5, 0x35, 0xb8, 0x1d, 0xf5, 0xb4,
++      0x71, 0x24, 0xfb, 0xda, 0x18, 0x1f, 0x6c, 0x24, 0x3d, 0x57, 0xd5, 0x21,
++      0x45, 0x82, 0xee, 0xd1, 0x53, 0xe4, 0x5c, 0xad, 0xb1, 0x47, 0x68, 0xbf,
++      0xb9, 0x50, 0x24, 0x6c, 0x21, 0x85, 0xe7, 0xec, 0x65, 0x7f, 0xee, 0x81,
++      0x65, 0xd4, 0x70, 0xa2, 0xab, 0xcd, 0xa9, 0x3f, 0xbf, 0x35, 0x1a, 0xd1,
++      0x5e, 0x2c, 0x9d, 0xd5, 0xe9, 0xb5, 0x7f, 0xe1, 0xee, 0x51, 0x79, 0xf4,
++      0xdf, 0x55, 0x46, 0xda, 0xf6, 0x63, 0x2c, 0x9b, 0xc5, 0x96, 0xc7, 0xd8,
++      0x47, 0xdd, 0xc1, 0x32, 0x63, 0x33, 0x96, 0x1b, 0x01, 0xac, 0x0b, 0xb6,
++      0x24, 0xe4, 0x2c, 0xd2, 0x48, 0xae, 0xb8, 0x36, 0x52, 0x5c, 0x0b, 0xef,
++      0xc7, 0xa3, 0x19, 0x37, 0x3e, 0x07, 0xfd, 0x66, 0x52, 0x79, 0x34, 0xdf,
++      0xa9, 0x3c, 0x52, 0x5a, 0x8f, 0xeb, 0xcf, 0xdf, 0x10, 0x44, 0xb5, 0x85,
++      0x13, 0x86, 0xbc, 0x47, 0x29, 0x72, 0x2d, 0x8c, 0x76, 0xfc, 0x21, 0xef,
++      0x53, 0x8a, 0x4e, 0x37, 0xa2, 0x6f, 0xf8, 0x61, 0xf4, 0x0e, 0xbf, 0xe4,
++      0x9e, 0x65, 0xf5, 0xe9, 0x7e, 0xeb, 0x0a, 0x33, 0x72, 0xd0, 0xc2, 0xbc,
++      0x7a, 0x59, 0x13, 0x6e, 0x34, 0x8f, 0xe2, 0xd1, 0xa0, 0xbc, 0x27, 0xd8,
++      0x4f, 0x9e, 0x22, 0xef, 0x9c, 0xad, 0xc1, 0x67, 0x06, 0x64, 0x0e, 0x6b,
++      0xad, 0x4a, 0x33, 0x92, 0x5c, 0xe7, 0xce, 0x61, 0x1b, 0x8e, 0x15, 0x1e,
++      0xc6, 0x1b, 0xbb, 0x36, 0x43, 0x8d, 0x47, 0xc2, 0xb7, 0xc0, 0xd9, 0x7c,
++      0xc4, 0x48, 0x5a, 0x3e, 0x44, 0x0e, 0x78, 0x54, 0xe0, 0xd9, 0x5d, 0x92,
++      0x4f, 0xf7, 0xe0, 0x7a, 0x72, 0x80, 0x3a, 0xdd, 0x59, 0xfa, 0xab, 0xc5,
++      0x91, 0x7e, 0xdd, 0x63, 0xfd, 0xd3, 0x1c, 0x44, 0xb2, 0x09, 0x55, 0xef,
++      0xf9, 0xa4, 0x0a, 0x25, 0x60, 0xca, 0x6f, 0x00, 0x6c, 0xc6, 0x27, 0xda,
++      0x03, 0xd6, 0x2c, 0x33, 0x92, 0x7d, 0x49, 0x89, 0xc4, 0x2c, 0xf5, 0x1b,
++      0x9c, 0xe7, 0x18, 0x5e, 0x24, 0xc7, 0xe9, 0x62, 0x6c, 0x5f, 0x21, 0x31,
++      0xdd, 0xc5, 0xbe, 0xe6, 0x44, 0x95, 0x12, 0xc4, 0x2d, 0x05, 0xe0, 0x50,
++      0x6e, 0x0d, 0x4e, 0xee, 0x32, 0xd0, 0xc9, 0x67, 0x83, 0x19, 0x02, 0x16,
++      0x31, 0x60, 0x83, 0x61, 0xb5, 0xaa, 0xe4, 0x16, 0x3e, 0x15, 0xcb, 0xe6,
++      0x9b, 0xd1, 0xa9, 0xa5, 0x1e, 0x2f, 0x12, 0x05, 0x2f, 0xee, 0x60, 0x99,
++      0xed, 0x8c, 0x0b, 0x9f, 0x4c, 0xfb, 0xc9, 0x6f, 0x9b, 0xf0, 0x33, 0xf2,
++      0xec, 0x9f, 0x92, 0x4f, 0x1f, 0x27, 0x5f, 0x38, 0x9e, 0xaf, 0x46, 0xf7,
++      0x90, 0x4f, 0xce, 0x1f, 0x4d, 0xf9, 0x38, 0x17, 0xb5, 0xed, 0x21, 0x9c,
++      0x1e, 0xf5, 0xe3, 0xf6, 0x5d, 0x91, 0x3d, 0xc7, 0xd5, 0x46, 0xbc, 0x3f,
++      0x5a, 0x8d, 0x95, 0x43, 0x7e, 0xf6, 0xcd, 0xc1, 0x0e, 0xe2, 0xff, 0xbb,
++      0x7c, 0xd6, 0xb9, 0x0b, 0x4a, 0x7e, 0xc9, 0x02, 0xe6, 0x04, 0x3a, 0xeb,
++      0xd7, 0xe0, 0xd6, 0x21, 0xe1, 0x81, 0x2a, 0xde, 0x1e, 0x55, 0xf0, 0x56,
++      0xce, 0xc0, 0x32, 0xb6, 0xd7, 0x97, 0x79, 0xd6, 0xf1, 0xd3, 0xcf, 0xd7,
++      0xe6, 0x0d, 0xdc, 0x9b, 0xd3, 0x19, 0x53, 0x7e, 0xe2, 0x78, 0xf4, 0x76,
++      0xfc, 0x64, 0xa7, 0x7e, 0xf4, 0x75, 0x4f, 0x74, 0x6a, 0x89, 0xa7, 0x1d,
++      0xaf, 0xed, 0x6f, 0xc7, 0xf7, 0x06, 0x97, 0xe2, 0x9a, 0xf6, 0x24, 0xce,
++      0x2c, 0x69, 0xc7, 0xab, 0x7b, 0x75, 0x3c, 0x92, 0xe9, 0x80, 0x36, 0x31,
++      0x45, 0xfe, 0x9b, 0x40, 0xeb, 0x84, 0x09, 0x7d, 0xd0, 0xd9, 0x5c, 0x63,
++      0x6e, 0xc6, 0xa3, 0x86, 0x89, 0x45, 0x7b, 0x45, 0x0f, 0x8e, 0xb3, 0x6e,
++      0x89, 0x89, 0x17, 0xb2, 0x3a, 0xfd, 0xd4, 0xa4, 0x1e, 0x74, 0x3c, 0x9e,
++      0x31, 0x11, 0x7d, 0x4c, 0x9f, 0xde, 0xc7, 0xef, 0x4b, 0xf7, 0x75, 0xa0,
++      0x87, 0xed, 0xdb, 0xc4, 0xeb, 0x3d, 0x13, 0x6d, 0x1c, 0xb3, 0xc1, 0xf1,
++      0x37, 0x5b, 0x3f, 0x53, 0x3a, 0x91, 0x9d, 0xe8, 0x22, 0x9f, 0xdd, 0x4c,
++      0x1e, 0xdb, 0xe5, 0xee, 0xb9, 0x6f, 0xcd, 0x18, 0xb8, 0x35, 0xdd, 0x85,
++      0x27, 0x6d, 0x39, 0x3b, 0xaf, 0x27, 0xae, 0x55, 0xe4, 0x1d, 0xdd, 0x2e,
++      0x8c, 0x51, 0x27, 0xcb, 0x86, 0x56, 0xba, 0xe7, 0x9d, 0x96, 0xef, 0xd2,
++      0xf1, 0x44, 0xe6, 0x13, 0x38, 0x39, 0x6e, 0xa0, 0x3b, 0x2d, 0xfa, 0x96,
++      0xf3, 0x9b, 0x29, 0x1c, 0x61, 0x6c, 0xf9, 0xd9, 0x50, 0xf2, 0x9f, 0x38,
++      0xcd, 0xc7, 0x54, 0xc8, 0x7a, 0x89, 0x8a, 0xab, 0xdb, 0xe5, 0x0c, 0xae,
++      0x87, 0xa8, 0x16, 0xb1, 0xea, 0x54, 0x4b, 0xe3, 0x7d, 0xcb, 0xab, 0x6e,
++      0xc2, 0x67, 0x87, 0xbc, 0xcc, 0x19, 0x54, 0xe6, 0x3a, 0xd6, 0x06, 0xda,
++      0x86, 0x55, 0xab, 0x16, 0xe7, 0xcd, 0xdd, 0x63, 0xd0, 0x3d, 0xd8, 0x61,
++      0x34, 0x77, 0xd7, 0xb0, 0xde, 0x8a, 0x78, 0x24, 0x59, 0xa5, 0x76, 0x30,
++      0x0f, 0x7d, 0x18, 0xeb, 0x76, 0x3d, 0x8c, 0xb5, 0xbc, 0x36, 0xec, 0x72,
++      0x36, 0xdf, 0x6c, 0x28, 0x78, 0x4e, 0x77, 0x36, 0x6f, 0x36, 0x74, 0xce,
++      0xad, 0xcc, 0xeb, 0xc3, 0xd8, 0x38, 0xf6, 0x30, 0x1e, 0xa2, 0x7d, 0x35,
++      0xd0, 0x8f, 0x57, 0xa5, 0x9d, 0xcd, 0xd7, 0xb4, 0xc7, 0xf0, 0x73, 0x37,
++      0xbf, 0x11, 0x7b, 0x3d, 0xe3, 0xe6, 0xdc, 0x39, 0xd5, 0xb5, 0xdd, 0xa0,
++      0x7c, 0xb6, 0xd4, 0x25, 0xc1, 0x72, 0x6c, 0xf9, 0x05, 0xe5, 0xfe, 0x72,
++      0x57, 0x1d, 0x1e, 0x6b, 0x90, 0xf8, 0xe1, 0xb7, 0xaa, 0x4c, 0x28, 0xfa,
++      0x12, 0xe6, 0x71, 0x8f, 0x1d, 0xc1, 0x76, 0xf2, 0xc2, 0x50, 0x5c, 0x72,
++      0xec, 0x56, 0x63, 0x8b, 0x7a, 0x23, 0xb1, 0x5d, 0xc1, 0xa3, 0x0b, 0xb3,
++      0x18, 0xa0, 0xaf, 0xee, 0x58, 0x18, 0x49, 0x0d, 0xc0, 0x74, 0x76, 0xcc,
++      0xe9, 0xff, 0x23, 0xde, 0xa1, 0x2d, 0xef, 0x4b, 0xca, 0x7b, 0xb4, 0x0f,
++      0x63, 0xf3, 0x2e, 0x99, 0xff, 0x87, 0xf1, 0x45, 0xf6, 0x7f, 0xe3, 0xd0,
++      0xc3, 0xf8, 0x1c, 0x6d, 0xa7, 0x7e, 0xf1, 0xa1, 0x2f, 0xd6, 0xa3, 0x25,
++      0x5b, 0x87, 0xa9, 0xfb, 0x1b, 0xe4, 0xbc, 0x2d, 0x31, 0x71, 0x40, 0x79,
++      0x18, 0xf7, 0x8c, 0xd4, 0xd2, 0x17, 0xdd, 0x31, 0x10, 0x8b, 0xcb, 0xf1,
++      0x2a, 0x8c, 0x75, 0xf9, 0xa6, 0x12, 0xae, 0x87, 0xb0, 0xd6, 0x3e, 0xe0,
++      0xfa, 0x7e, 0x85, 0xb9, 0x9a, 0x7e, 0xdf, 0x4d, 0xbf, 0x5f, 0x49, 0xbf,
++      0xef, 0xa2, 0xdf, 0x77, 0xd2, 0xef, 0x93, 0xf4, 0x7b, 0x93, 0x7e, 0x9f,
++      0xa0, 0xdf, 0x77, 0xd0, 0xef, 0x0d, 0xd9, 0x3b, 0x54, 0x8e, 0x76, 0x1c,
++      0x81, 0x6f, 0xd0, 0x4f, 0x1b, 0x2a, 0xbe, 0xd3, 0xb8, 0x9f, 0xf8, 0x73,
++      0xc2, 0x58, 0x14, 0xbe, 0x89, 0xaa, 0x1a, 0x25, 0x46, 0xe4, 0xc6, 0xff,
++      0xce, 0x7d, 0xff, 0x2d, 0x47, 0xdc, 0x7f, 0x91, 0xfa, 0x58, 0x11, 0x6f,
++      0x36, 0x9e, 0x64, 0x0c, 0xfb, 0xa1, 0xde, 0xda, 0x1f, 0x62, 0x99, 0xaf,
++      0x65, 0x5a, 0xb3, 0xb3, 0xa1, 0x5b, 0xed, 0xea, 0x56, 0x60, 0x55, 0x88,
++      0x63, 0x96, 0x73, 0xdd, 0xab, 0xf0, 0xc5, 0xe1, 0x6e, 0xfc, 0xcf, 0xe1,
++      0x20, 0x75, 0xd1, 0x3c, 0x75, 0xa3, 0x07, 0xdf, 0x0c, 0xc3, 0x13, 0x9a,
++      0x0b, 0x7c, 0xd0, 0x88, 0x45, 0x07, 0xe4, 0x5d, 0xec, 0x5c, 0xa3, 0xa7,
++      0x6d, 0x3e, 0xc4, 0x46, 0x40, 0xa4, 0xf6, 0x30, 0xd3, 0x5c, 0xe4, 0xbe,
++      0xaf, 0x99, 0x5c, 0x2d, 0x98, 0x5e, 0x85, 0xad, 0x31, 0x17, 0x67, 0x9f,
++      0x96, 0xf3, 0xe9, 0x8d, 0xc4, 0xa3, 0x80, 0xd9, 0x85, 0x6d, 0x03, 0xd6,
++      0x5d, 0x8d, 0x58, 0x89, 0xfe, 0x81, 0xa2, 0x0e, 0xee, 0x8f, 0x13, 0xf2,
++      0xcc, 0xa8, 0xb6, 0x48, 0x81, 0x77, 0x43, 0x47, 0x02, 0xf7, 0xe6, 0x6d,
++      0x64, 0x39, 0xc6, 0xf5, 0xf4, 0xb3, 0x75, 0xbf, 0xff, 0x3d, 0x7c, 0x7c,
++      0xce, 0xd6, 0x68, 0xff, 0xe7, 0x9c, 0x5c, 0xfd, 0xa2, 0x6c, 0x23, 0xf4,
++      0x8d, 0x77, 0xa8, 0xd7, 0x32, 0x67, 0x8e, 0x1c, 0xe4, 0x23, 0x6b, 0x8e,
++      0x7b, 0x8e, 0xce, 0x8f, 0x05, 0x43, 0x50, 0x46, 0xd3, 0xf2, 0xce, 0xda,
++      0x66, 0xfc, 0x5f, 0xc6, 0x37, 0x5c, 0x5b, 0x9a, 0xf2, 0xc8, 0x99, 0x16,
++      0xb9, 0xef, 0x2c, 0x3d, 0xbb, 0x38, 0x12, 0xd3, 0x3c, 0x3f, 0xa8, 0x93,
++      0xfd, 0x8b, 0xaf, 0x33, 0xce, 0x86, 0x87, 0x96, 0x42, 0x5d, 0xec, 0xc7,
++      0x9d, 0x6d, 0xb3, 0x90, 0x5a, 0x25, 0x3c, 0xd4, 0xdd, 0x5f, 0xa1, 0x3e,
++      0xff, 0x02, 0xf7, 0x19, 0x5f, 0xc1, 0xf1, 0x90, 0x8d, 0x21, 0xe2, 0xd7,
++      0x3a, 0xe3, 0x76, 0xc5, 0xe2, 0x67, 0xe6, 0x44, 0x58, 0x6f, 0x30, 0xd7,
++      0xfa, 0x54, 0x03, 0x1a, 0x76, 0x49, 0x79, 0x91, 0x7b, 0xc6, 0x95, 0xb7,
++      0x3f, 0x23, 0x9f, 0x8b, 0x36, 0x3b, 0xe5, 0xf9, 0x24, 0xd0, 0x20, 0xe7,
++      0x84, 0x15, 0xbc, 0xbd, 0xd0, 0xc6, 0x63, 0x19, 0x7c, 0xb3, 0x0a, 0xcd,
++      0xb9, 0x41, 0xd5, 0xf3, 0xcd, 0xb9, 0x58, 0x64, 0xfc, 0x5a, 0x95, 0xf9,
++      0x48, 0xe2, 0xbe, 0x85, 0x72, 0x1e, 0x4d, 0x3f, 0xf3, 0x3d, 0xfa, 0xd6,
++      0x71, 0xd8, 0xd8, 0x3e, 0xf9, 0x92, 0x33, 0x35, 0x37, 0x84, 0xa7, 0x26,
++      0xa5, 0x6e, 0x37, 0x4e, 0x70, 0x4e, 0xbe, 0xec, 0xee, 0xe7, 0x45, 0x92,
++      0x27, 0x54, 0x79, 0xe7, 0xb0, 0x1b, 0x6f, 0x8d, 0x1a, 0xd8, 0xc7, 0x1c,
++      0xea, 0x57, 0xc3, 0xab, 0xf0, 0xeb, 0xe1, 0x66, 0xed, 0x6f, 0x14, 0x39,
++      0x03, 0xff, 0x71, 0xfc, 0xa8, 0x21, 0x88, 0x83, 0xb4, 0xa1, 0x69, 0xbb,
++      0x0b, 0x6f, 0xdb, 0x56, 0x64, 0x2e, 0x22, 0x7b, 0xbc, 0x9e, 0xc8, 0x01,
++      0x79, 0xcf, 0x79, 0x9d, 0x1a, 0x39, 0xb8, 0x44, 0x89, 0x58, 0x6f, 0xa8,
++      0x2b, 0xf1, 0x8b, 0x7c, 0x17, 0xce, 0xe4, 0x67, 0xda, 0xc2, 0x66, 0x07,
++      0x8d, 0x62, 0x07, 0x62, 0x0f, 0xb4, 0x45, 0xe6, 0x8a, 0xdf, 0x26, 0x8f,
++      0xee, 0xfd, 0x18, 0xed, 0x31, 0x43, 0x7b, 0xcc, 0xd0, 0x1e, 0x89, 0x49,
++      0xcf, 0x10, 0xab, 0xbe, 0x96, 0xa1, 0x3d, 0xd2, 0x7f, 0xbe, 0x42, 0xff,
++      0x29, 0x72, 0xe5, 0x1e, 0x77, 0x4d, 0xff, 0x15, 0xc6, 0x44, 0xfb, 0x31,
++      0x79, 0x7f, 0xb8, 0x79, 0x7d, 0x01, 0x91, 0x9e, 0x01, 0x65, 0x5d, 0xbd,
++      0xbc, 0xcf, 0xf1, 0xf9, 0xa8, 0xf8, 0x80, 0xbc, 0x7b, 0x46, 0xbf, 0x1a,
++      0x3f, 0x55, 0x27, 0xef, 0xb2, 0xee, 0xdf, 0xfd, 0x51, 0x3a, 0xfb, 0x7b,
++      0xf6, 0x43, 0xf4, 0xf5, 0xc7, 0x8e, 0x5d, 0x74, 0xf9, 0x4f, 0xce, 0x8f,
++      0x1a, 0x65, 0xfc, 0xab, 0xf1, 0xf3, 0xe1, 0x4e, 0x9c, 0x65, 0xfc, 0xfd,
++      0x74, 0xfb, 0x94, 0x45, 0x9b, 0xdd, 0x68, 0x78, 0x4c, 0x4c, 0xe6, 0x3b,
++      0x71, 0xda, 0x36, 0x91, 0xb7, 0x9b, 0xd7, 0x7f, 0x57, 0x79, 0x53, 0xcd,
++      0xcd, 0x2b, 0xf2, 0xf9, 0xdf, 0x90, 0x5f, 0x1e, 0x6a, 0x91, 0xf7, 0x5d,
++      0x13, 0x18, 0xc9, 0x8b, 0x9d, 0x06, 0x71, 0xd3, 0x12, 0x43, 0xde, 0x11,
++      0xfb, 0xbd, 0x7f, 0xf7, 0xd9, 0xb2, 0x97, 0x72, 0xce, 0x99, 0x0a, 0xfa,
++      0xad, 0x20, 0x7d, 0xd8, 0xb3, 0x4b, 0x7e, 0x07, 0x40, 0xfc, 0x59, 0xc1,
++      0x67, 0x8c, 0x29, 0xad, 0x06, 0x91, 0xa7, 0x77, 0x33, 0x81, 0x7a, 0x2d,
++      0x2d, 0x67, 0x88, 0x3b, 0xf1, 0x26, 0xcb, 0x57, 0xd1, 0x2f, 0x5e, 0xcb,
++      0x7b, 0xbd, 0x3f, 0x4a, 0xcb, 0x7b, 0xec, 0x2b, 0xf1, 0xa3, 0xfc, 0xcb,
++      0xea, 0x2f, 0x82, 0x06, 0xde, 0x2e, 0xac, 0xc2, 0xfc, 0x5d, 0xb2, 0xbe,
++      0x90, 0xc4, 0x7e, 0x3b, 0x72, 0xf4, 0x59, 0xac, 0xc2, 0xbc, 0xb1, 0xd5,
++      0xcc, 0xa3, 0x15, 0xbc, 0x17, 0x5d, 0x8d, 0x00, 0x3f, 0xd7, 0xee, 0x72,
++      0x9c, 0xc3, 0xf1, 0x3a, 0x67, 0xfb, 0x6a, 0x99, 0x3b, 0xc1, 0x93, 0x65,
++      0xf5, 0xa8, 0x5d, 0x0d, 0x8c, 0x09, 0x57, 0xd1, 0x71, 0xeb, 0xc0, 0x2a,
++      0x5c, 0xb1, 0xab, 0x39, 0x76, 0x2b, 0x9a, 0xb3, 0x47, 0x3c, 0xab, 0xd0,
++      0x30, 0x76, 0x2f, 0xe7, 0x40, 0xca, 0x6a, 0xb4, 0x3f, 0x0b, 0x95, 0xe4,
++      0x84, 0x9d, 0xe9, 0x9f, 0x3a, 0xf3, 0x4d, 0x77, 0x1f, 0x0e, 0xeb, 0x0a,
++      0x3a, 0xe3, 0x5d, 0x35, 0x52, 0x23, 0x4f, 0x38, 0x75, 0xa6, 0x17, 0x6b,
++      0x0b, 0x6d, 0xb8, 0x69, 0xc8, 0x71, 0x4e, 0x2f, 0x49, 0x22, 0x60, 0x06,
++      0x88, 0x61, 0x01, 0x3c, 0x94, 0xae, 0xe1, 0x7f, 0x07, 0x15, 0x8c, 0xc9,
++      0x2d, 0xaa, 0xbe, 0x7e, 0x9e, 0x47, 0xef, 0x29, 0x28, 0x12, 0xf7, 0x03,
++      0x78, 0x80, 0xf1, 0x79, 0x45, 0x3a, 0x8c, 0x54, 0xc1, 0x71, 0x5e, 0xed,
++      0x08, 0xe1, 0x7e, 0xd6, 0xef, 0x4a, 0xf7, 0xa3, 0x97, 0x76, 0x91, 0x1a,
++      0xd3, 0xb5, 0x20, 0xe3, 0xfd, 0xba, 0x82, 0x9f, 0x31, 0xac, 0x01, 0xb7,
++      0xec, 0xd2, 0xf0, 0x50, 0x21, 0xc0, 0xf8, 0xe6, 0x2c, 0x3d, 0x69, 0x58,
++      0x57, 0x7a, 0xa0, 0x63, 0x63, 0x21, 0x84, 0x95, 0xe9, 0xc8, 0xb4, 0xbc,
++      0x47, 0x7d, 0xd6, 0x88, 0xe1, 0xc1, 0x42, 0x18, 0xb7, 0xa5, 0x0f, 0x3d,
++      0x34, 0x1f, 0xd6, 0xff, 0x98, 0x87, 0x36, 0x7c, 0xa6, 0xd0, 0x44, 0xf9,
++      0x91, 0xf5, 0xaf, 0x28, 0x4d, 0xf8, 0xec, 0x98, 0x41, 0xf9, 0x2a, 0x6e,
++      0xa5, 0x9c, 0x9b, 0xd3, 0x57, 0xe0, 0x81, 0xb1, 0x0e, 0xdc, 0x5b, 0x58,
++      0x8c, 0xe5, 0x8c, 0x4f, 0x1b, 0x98, 0x1b, 0xe2, 0xbf, 0x00, 0xb7, 0x0d,
++      0x89, 0xee, 0xa1, 0xbc, 0xda, 0x31, 0xc5, 0x7c, 0xdc, 0x00, 0x0d, 0x91,
++      0xf7, 0x74, 0x72, 0x30, 0x03, 0xb7, 0xed, 0x5d, 0xec, 0xee, 0xc9, 0x37,
++      0xc7, 0x2b, 0x91, 0xea, 0x56, 0xd0, 0x39, 0x24, 0x71, 0x56, 0xb8, 0x8d,
++      0xc1, 0xb8, 0x1a, 0x65, 0x1b, 0x06, 0xe3, 0x6a, 0xf1, 0x7e, 0x6f, 0x46,
++      0xd6, 0x2e, 0x7e, 0x42, 0xbe, 0x14, 0x47, 0xa7, 0x1b, 0xa3, 0xfd, 0xe4,
++      0xd7, 0x16, 0xbc, 0x8c, 0xdd, 0x71, 0xda, 0xf8, 0xd2, 0x76, 0x89, 0xd5,
++      0x3a, 0x06, 0xe8, 0x0f, 0x93, 0x83, 0xfa, 0x86, 0x69, 0xc5, 0x44, 0x61,
++      0xaf, 0xc4, 0xc4, 0x10, 0x1e, 0x4c, 0x9b, 0x38, 0x29, 0xe7, 0xf8, 0xaf,
++      0x4a, 0xae, 0xa8, 0x81, 0x6e, 0x3c, 0x80, 0xa8, 0x75, 0x8c, 0xb1, 0xfd,
++      0x4c, 0xae, 0x01, 0x37, 0xed, 0x92, 0x32, 0xed, 0x78, 0x7d, 0xd4, 0x8b,
++      0x9b, 0xd2, 0x9b, 0xf0, 0x44, 0xd6, 0x83, 0x11, 0xa3, 0xb9, 0x5f, 0x65,
++      0xfc, 0xbc, 0xbe, 0x3d, 0x12, 0xfc, 0x3a, 0xb9, 0xea, 0xf4, 0x62, 0x46,
++      0xe5, 0xb9, 0x1d, 0xe8, 0x64, 0xbf, 0x3a, 0x75, 0xf1, 0x49, 0x0b, 0xf7,
++      0x76, 0x6c, 0xc2, 0xb1, 0xac, 0x6e, 0x3d, 0x29, 0xeb, 0x0c, 0xed, 0x7c,
++      0x3e, 0xc7, 0x8b, 0x3e, 0x5d, 0x38, 0xad, 0x4e, 0xdf, 0x22, 0xeb, 0xd4,
++      0x3b, 0x70, 0x92, 0xf6, 0xda, 0x9f, 0x5b, 0xca, 0xd8, 0x2f, 0x31, 0xdf,
++      0x6f, 0x85, 0x59, 0xaf, 0xee, 0x3a, 0x05, 0x27, 0xf6, 0x09, 0xc7, 0x5a,
++      0x8a, 0xbb, 0xa8, 0xa7, 0xce, 0xb4, 0x8a, 0xeb, 0xc7, 0xd6, 0xe0, 0xf4,
++      0xce, 0x22, 0xe7, 0x7a, 0x35, 0x6e, 0x7d, 0x86, 0x9c, 0xab, 0x67, 0x16,
++      0x39, 0x17, 0xb9, 0x5c, 0xec, 0x41, 0xc5, 0x8b, 0x68, 0x21, 0x41, 0x5e,
++      0x21, 0xfc, 0x22, 0x8c, 0xa7, 0xf2, 0x1d, 0xb8, 0x25, 0xdd, 0x84, 0x71,
++      0xf2, 0xad, 0x1c, 0xf1, 0x22, 0x97, 0x67, 0x5c, 0x19, 0x6d, 0xe4, 0xa5,
++      0xf1, 0x5a, 0xc0, 0x4b, 0x77, 0xef, 0xad, 0xa5, 0x2d, 0x27, 0xbb, 0x25,
++      0x4f, 0x23, 0xff, 0xcd, 0x4b, 0xac, 0x56, 0x98, 0xb7, 0xfe, 0xaf, 0x7a,
++      0xc9, 0x4d, 0x83, 0xba, 0x82, 0xaf, 0x65, 0x35, 0xfc, 0x55, 0xfb, 0x76,
++      0x25, 0xd9, 0xe0, 0xbe, 0x83, 0x4a, 0xdf, 0xb6, 0x70, 0x92, 0x63, 0xba,
++      0x37, 0x2b, 0x76, 0x49, 0x19, 0xcc, 0xd1, 0x8f, 0x19, 0xf5, 0xd0, 0xea,
++      0x35, 0x39, 0xd7, 0xc4, 0xd8, 0xc1, 0xf8, 0x6b, 0xa7, 0xc8, 0xa3, 0x5a,
++      0xbb, 0x5b, 0x55, 0x8f, 0xbc, 0x9f, 0x67, 0x68, 0xaa, 0xf8, 0x58, 0x0a,
++      0x15, 0x69, 0xbf, 0x55, 0x27, 0xf5, 0x97, 0x6c, 0x60, 0x3c, 0x68, 0x5d,
++      0xff, 0xb2, 0xf0, 0xfb, 0x39, 0x11, 0x6d, 0x0a, 0x1b, 0xb0, 0xce, 0xd6,
++      0x19, 0x03, 0xd7, 0x38, 0xbd, 0x9c, 0x87, 0x51, 0x7b, 0x03, 0xee, 0xb2,
++      0x5b, 0xa7, 0x1e, 0xa7, 0x6d, 0xe1, 0xce, 0x0d, 0xe8, 0xe4, 0xb3, 0x91,
++      0x4c, 0xf3, 0x74, 0x2f, 0x75, 0x7d, 0x7c, 0x76, 0xcc, 0x5d, 0xf7, 0x97,
++      0x33, 0xe4, 0xa3, 0xe4, 0xd7, 0x5f, 0xcd, 0xb4, 0x26, 0x87, 0xd4, 0x1e,
++      0x05, 0x73, 0x24, 0x97, 0x4c, 0x90, 0x53, 0x05, 0xf0, 0x99, 0xb4, 0x45,
++      0x1f, 0x00, 0x6d, 0xae, 0x83, 0x79, 0xc5, 0x13, 0x4e, 0xbd, 0x19, 0x35,
++      0x44, 0x3f, 0xeb, 0x0b, 0x4b, 0xf1, 0x14, 0x63, 0x6f, 0xf3, 0xb5, 0x7a,
++      0xf0, 0x39, 0x68, 0xf0, 0x99, 0x3f, 0x75, 0x1a, 0xcc, 0x1a, 0x3c, 0x30,
++      0x12, 0x4d, 0xdc, 0xc4, 0x38, 0xdb, 0x79, 0xad, 0x7e, 0xf4, 0x14, 0x63,
++      0xe0, 0x7c, 0xd3, 0x96, 0xf3, 0x26, 0xe4, 0x3b, 0x01, 0xd7, 0xce, 0x4f,
++      0xdb, 0xe2, 0x27, 0x3a, 0x71, 0x33, 0x84, 0xcf, 0xd1, 0xce, 0xdf, 0xb7,
++      0x63, 0x98, 0x24, 0xdf, 0xf8, 0x2c, 0xfd, 0xe3, 0x8c, 0x1d, 0x49, 0x5d,
++      0xa3, 0xea, 0xd8, 0x40, 0xff, 0x78, 0xd7, 0x4e, 0xd0, 0x77, 0x3e, 0xc6,
++      0xab, 0x8d, 0xfe, 0x10, 0x63, 0x1d, 0x8d, 0x7e, 0x10, 0x72, 0xcf, 0x95,
++      0x8e, 0x65, 0x9a, 0xbb, 0x1f, 0x42, 0x73, 0xec, 0x66, 0xa5, 0x8e, 0x79,
++      0x6a, 0x10, 0xf7, 0x14, 0x6e, 0xc0, 0x89, 0x6c, 0x64, 0x9a, 0x39, 0xf9,
++      0xc6, 0xa5, 0x0a, 0xee, 0x20, 0x67, 0x5b, 0x5f, 0xad, 0xb4, 0x4e, 0x3d,
++      0xa5, 0x44, 0x68, 0x93, 0x8c, 0x97, 0xf4, 0xcf, 0xcf, 0xb2, 0xcc, 0x99,
++      0x6c, 0x35, 0x36, 0x8c, 0xd8, 0xe8, 0xcf, 0x54, 0xa0, 0x6a, 0xa7, 0x1f,
++      0xf7, 0x8f, 0xe9, 0xc8, 0x64, 0x64, 0x1d, 0xd9, 0x6f, 0xd5, 0x12, 0x37,
++      0x46, 0x89, 0x0d, 0x2f, 0x2d, 0x01, 0xa6, 0xf7, 0xae, 0xc1, 0x81, 0x9d,
++      0x3a, 0xe3, 0x5d, 0xd1, 0x3e, 0x82, 0x71, 0x97, 0x93, 0xa7, 0x84, 0x93,
++      0x57, 0x99, 0x12, 0xfb, 0xa2, 0x3d, 0x8f, 0x50, 0x07, 0xb7, 0x15, 0xc4,
++      0xee, 0x12, 0x9c, 0xa3, 0x30, 0x06, 0x69, 0x23, 0xfb, 0xec, 0x26, 0xe6,
++      0xe6, 0x01, 0x58, 0xb4, 0x11, 0x4b, 0xde, 0x53, 0xa5, 0x8d, 0x58, 0xb4,
++      0x11, 0x8b, 0x36, 0x62, 0xd1, 0x46, 0xac, 0xfc, 0x52, 0xe6, 0x4c, 0x3a,
++      0xc6, 0xd9, 0xe6, 0xb6, 0x51, 0x72, 0xf7, 0xa0, 0xd8, 0x4a, 0x0c, 0x5f,
++      0xcf, 0xf4, 0x2b, 0xda, 0x9d, 0x37, 0x60, 0x24, 0x7b, 0x23, 0x2f, 0x05,
++      0xb7, 0xd2, 0x56, 0x1e, 0xcd, 0x89, 0xed, 0xe9, 0xee, 0xef, 0xd3, 0x3c,
++      0x9b, 0xdf, 0x33, 0x1b, 0xd5, 0xe2, 0x03, 0x8c, 0x45, 0xee, 0x7d, 0x39,
++      0x73, 0xec, 0xc7, 0x68, 0xfe, 0x82, 0x5f, 0x7c, 0x4f, 0xce, 0xab, 0xb4,
++      0xcb, 0x6f, 0xc5, 0x74, 0x30, 0x0f, 0x90, 0x73, 0xee, 0x32, 0x4e, 0x19,
++      0x57, 0x71, 0x4c, 0x55, 0x83, 0x9b, 0xf0, 0xf5, 0x41, 0x9d, 0xb1, 0xca,
++      0xc0, 0x93, 0x39, 0x89, 0xe5, 0xe2, 0xdf, 0x32, 0x0f, 0xe2, 0xeb, 0x1e,
++      0xd4, 0xb4, 0x7b, 0x11, 0x70, 0xfd, 0xbc, 0x39, 0xbc, 0x43, 0xb1, 0xe9,
++      0x3b, 0xba, 0x9c, 0x03, 0x9d, 0x0a, 0xeb, 0x0d, 0x38, 0xbd, 0xbb, 0x1d,
++      0xff, 0x6d, 0xa7, 0x87, 0x3c, 0xc0, 0x59, 0xfa, 0x52, 0x5c, 0x4f, 0x4e,
++      0x2b, 0xd1, 0xd8, 0x2c, 0xa5, 0x1d, 0xf7, 0x90, 0xfb, 0x6f, 0x18, 0x8c,
++      0x74, 0x33, 0x66, 0x1b, 0xb7, 0x28, 0x4b, 0x51, 0xc5, 0x1c, 0xa0, 0x8d,
++      0x39, 0xc0, 0x83, 0xc4, 0x80, 0xaf, 0x66, 0xbc, 0x68, 0x59, 0x2c, 0xbf,
++      0x4d, 0xa6, 0xbb, 0x6b, 0x3b, 0x2f, 0x90, 0xa3, 0xce, 0x37, 0x3b, 0xe4,
++      0x2c, 0x8e, 0x72, 0xf6, 0xba, 0x29, 0x24, 0x28, 0x7f, 0xcc, 0xcd, 0x2f,
++      0x12, 0x38, 0x98, 0x27, 0x6e, 0x70, 0xdc, 0xaf, 0xb4, 0xfd, 0x84, 0xf9,
++      0xb0, 0x70, 0x7b, 0x13, 0x13, 0x39, 0x97, 0xff, 0x47, 0xea, 0x88, 0x19,
++      0xd9, 0x41, 0xbd, 0xcb, 0xaf, 0x9a, 0x78, 0x64, 0xaf, 0xf8, 0xb0, 0x89,
++      0xf6, 0x21, 0x3d, 0x7c, 0x9b, 0x1a, 0x0d, 0xae, 0xe3, 0xb3, 0x05, 0x9c,
++      0xcf, 0xc7, 0x33, 0x32, 0x8f, 0x1a, 0x5a, 0x18, 0x9b, 0xdf, 0x9c, 0xd0,
++      0xb1, 0x88, 0x71, 0xfa, 0x9d, 0x89, 0x18, 0x96, 0x32, 0x66, 0x3b, 0xcc,
++      0x1f, 0x12, 0x19, 0xf1, 0x45, 0xf2, 0x81, 0x09, 0x8d, 0x71, 0x56, 0xd6,
++      0x87, 0x9e, 0xc0, 0xd8, 0x6a, 0x0d, 0xfb, 0xdc, 0xf3, 0x7c, 0x7e, 0xab,
++      0x81, 0x58, 0xd9, 0x39, 0xe0, 0xc7, 0xa7, 0x87, 0x36, 0xe3, 0xf5, 0xc5,
++      0xc2, 0x95, 0xd6, 0x38, 0xa2, 0x9f, 0xc7, 0x29, 0x73, 0x8c, 0xbc, 0x78,
++      0x94, 0x79, 0xd7, 0xc2, 0x7d, 0x6b, 0xf0, 0xc9, 0x5d, 0x17, 0xf2, 0xb4,
++      0x33, 0x71, 0xeb, 0x6e, 0xda, 0xc4, 0xfa, 0x00, 0x6d, 0xa2, 0x96, 0x36,
++      0x61, 0x67, 0xa2, 0xc9, 0x02, 0x6d, 0x22, 0x46, 0xdc, 0xc8, 0x0e, 0x48,
++      0x39, 0xf7, 0x9d, 0x99, 0xbb, 0xe4, 0xdd, 0x65, 0x83, 0xbe, 0xb3, 0x75,
++      0xc0, 0xd9, 0xec, 0x65, 0xbc, 0x79, 0xa4, 0xa3, 0x89, 0xd8, 0x72, 0x23,
++      0xf6, 0x0c, 0x36, 0xa1, 0x85, 0x31, 0x63, 0x61, 0x1a, 0x77, 0x84, 0xa1,
++      0xce, 0x0f, 0x23, 0xb2, 0xe1, 0x1d, 0x44, 0xa7, 0xef, 0x56, 0x5a, 0x8f,
++      0xbe, 0xa8, 0x44, 0x36, 0xfe, 0x84, 0x36, 0x7c, 0x56, 0x91, 0xb6, 0x9b,
++      0x70, 0x35, 0xfd, 0xe4, 0x2a, 0xfa, 0x84, 0xc6, 0x5c, 0x52, 0x63, 0xdd,
++      0xfe, 0x41, 0x1f, 0xe6, 0x33, 0xd7, 0x93, 0xb3, 0xca, 0xb1, 0x31, 0x2f,
++      0xb2, 0x3b, 0xf5, 0xa9, 0x47, 0xd0, 0x08, 0x63, 0xec, 0x46, 0x6c, 0x1d,
++      0xd4, 0x10, 0xe5, 0xbd, 0xbe, 0x9d, 0x0b, 0xd0, 0x4c, 0xfb, 0xd6, 0xe8,
++      0xa7, 0xbd, 0x83, 0x2a, 0x16, 0x8c, 0xdd, 0x80, 0x1d, 0x83, 0x0a, 0xee,
++      0x8b, 0x2a, 0x68, 0x19, 0x91, 0x1c, 0x2c, 0x86, 0xa7, 0x32, 0xc2, 0x15,
++      0xa1, 0xb4, 0x5c, 0x4b, 0x8e, 0x4c, 0xee, 0xf9, 0x93, 0x9c, 0xcc, 0xb9,
++      0xe8, 0x53, 0x7e, 0x53, 0xa6, 0x1d, 0x9f, 0xdb, 0xd9, 0x80, 0xab, 0x76,
++      0xeb, 0xd6, 0x69, 0xc5, 0x59, 0x7a, 0x80, 0x7c, 0xde, 0xaf, 0x16, 0xe7,
++      0xfc, 0xc1, 0xc1, 0x67, 0x19, 0x2f, 0x7e, 0xe2, 0x04, 0xf5, 0xa5, 0xe8,
++      0x8b, 0x27, 0xb1, 0xb6, 0xa3, 0x1d, 0x6b, 0xf7, 0x8a, 0xbe, 0x1c, 0xe6,
++      0x87, 0xcc, 0xfd, 0x26, 0xa7, 0xf0, 0x0e, 0xfd, 0x77, 0x11, 0x39, 0xed,
++      0x52, 0xc6, 0x89, 0x37, 0x16, 0x9b, 0xd4, 0x9f, 0xee, 0x9e, 0xf5, 0x9b,
++      0x67, 0x9a, 0xa8, 0x1d, 0xd4, 0x19, 0x67, 0x4c, 0xcc, 0xda, 0x2b, 0xed,
++      0x99, 0xb8, 0x67, 0x50, 0x4f, 0x3d, 0xcd, 0xb9, 0x14, 0xbb, 0x11, 0xcc,
++      0xae, 0x61, 0xec, 0x3f, 0x39, 0x29, 0x38, 0xd5, 0x89, 0x13, 0xcc, 0x03,
++      0xde, 0x7c, 0x2c, 0xda, 0xfd, 0x33, 0xe6, 0x74, 0xef, 0x50, 0x46, 0x96,
++      0xfd, 0x1b, 0xe0, 0xbc, 0x56, 0xa4, 0xf5, 0x8d, 0xff, 0x8c, 0x28, 0xfd,
++      0xbb, 0x0b, 0xb5, 0xd4, 0xc9, 0x81, 0xc1, 0x95, 0xf0, 0xd3, 0x16, 0x1e,
++      0xc9, 0x88, 0xdd, 0x10, 0xbf, 0x77, 0x7e, 0x02, 0x5b, 0xf7, 0x17, 0xf3,
++      0xbc, 0x7b, 0x06, 0x36, 0xd1, 0xc6, 0x85, 0xb3, 0xc7, 0x68, 0xef, 0x98,
++      0xe7, 0x43, 0xb2, 0x9e, 0x18, 0x91, 0x58, 0x4e, 0xcc, 0x7c, 0xd4, 0x20,
++      0xae, 0xd6, 0x47, 0xc2, 0x2d, 0xaa, 0x95, 0x60, 0x5e, 0x17, 0xbe, 0x0f,
++      0xd2, 0xbe, 0x85, 0x75, 0x4b, 0x36, 0x61, 0x4f, 0xd6, 0x8b, 0xaa, 0xc5,
++      0x1e, 0xe2, 0xb1, 0x60, 0x94, 0x15, 0x94, 0xe7, 0x6b, 0x21, 0x7e, 0x22,
++      0xf3, 0xeb, 0xc1, 0x99, 0x78, 0xf3, 0x86, 0xac, 0xfc, 0x96, 0x05, 0x73,
++      0xbe, 0xcf, 0xa2, 0x83, 0x73, 0x2f, 0xfe, 0x98, 0xc0, 0x3d, 0x63, 0xc2,
++      0xd5, 0xc8, 0xe7, 0x6c, 0x3f, 0xfe, 0x3a, 0x2b, 0x9c, 0x6e, 0x33, 0xee,
++      0x69, 0x2f, 0xe7, 0x6e, 0x62, 0x77, 0xad, 0xd3, 0x1e, 0x34, 0x93, 0x93,
++      0xe9, 0xb9, 0xac, 0x1a, 0xb1, 0x52, 0x88, 0xf4, 0xa7, 0x20, 0x71, 0xa2,
++      0xd5, 0xe2, 0x0c, 0x53, 0x36, 0xb9, 0xa5, 0xed, 0x41, 0x1d, 0x7d, 0x5c,
++      0x7e, 0x44, 0xae, 0x9d, 0xf6, 0xf3, 0xac, 0x5d, 0x0d, 0xcd, 0xb5, 0x75,
++      0x2f, 0x96, 0x16, 0x2c, 0xe2, 0xed, 0x52, 0xb4, 0x3d, 0x16, 0xc0, 0x35,
++      0xe4, 0x26, 0x57, 0xa7, 0x9f, 0x70, 0x66, 0x11, 0x7b, 0xdb, 0x46, 0xa2,
++      0xc1, 0x23, 0xe4, 0x81, 0x07, 0x96, 0xfc, 0xd4, 0xf1, 0x98, 0xae, 0x5f,
++      0x68, 0xf4, 0x00, 0xe7, 0x33, 0x1d, 0xfa, 0xd4, 0x0e, 0x04, 0x90, 0x20,
++      0x7e, 0x5e, 0x99, 0x69, 0x40, 0xfb, 0xee, 0x7e, 0xce, 0x7f, 0x10, 0x57,
++      0xf2, 0xfb, 0x62, 0xc6, 0x37, 0x8d, 0xd8, 0xaa, 0xc9, 0xe7, 0x82, 0xd8,
++      0x4b, 0x98, 0x7e, 0xe4, 0x2c, 0xbd, 0xb3, 0xdd, 0xba, 0x63, 0x36, 0xf5,
++      0xd5, 0x42, 0x5c, 0x5e, 0x9a, 0x89, 0x6c, 0xbc, 0x59, 0x51, 0xb0, 0xb2,
++      0xdd, 0x60, 0xdb, 0x01, 0xc4, 0x32, 0xb2, 0x36, 0x70, 0xe8, 0xa1, 0x3a,
++      0x58, 0xad, 0x01, 0xda, 0xe9, 0x11, 0x45, 0xd6, 0x35, 0x44, 0x6f, 0x4d,
++      0xb8, 0x8a, 0x7c, 0x44, 0x23, 0x66, 0xc7, 0x0a, 0xa2, 0x43, 0x60, 0x6d,
++      0x6e, 0x0d, 0xf6, 0x0c, 0x8b, 0x7f, 0x0a, 0x76, 0x3a, 0x4e, 0xe5, 0xe2,
++      0xa8, 0xf1, 0x36, 0x75, 0xf8, 0xc6, 0x84, 0x60, 0x90, 0x82, 0x79, 0xb4,
++      0x63, 0x55, 0x97, 0x58, 0x2b, 0xb8, 0x15, 0xa6, 0xdf, 0x76, 0xe0, 0xd3,
++      0x8c, 0x6d, 0xd5, 0x9c, 0x83, 0x55, 0x4b, 0x9a, 0xe8, 0xbf, 0xc4, 0xc9,
++      0x89, 0x20, 0xaf, 0x10, 0x8e, 0xef, 0x6f, 0xe4, 0xa5, 0xf1, 0x5a, 0xc0,
++      0x4b, 0xe7, 0x3d, 0x15, 0x67, 0xf6, 0x93, 0x33, 0xed, 0x15, 0x0e, 0x22,
++      0x3e, 0xe8, 0xc7, 0xd3, 0x13, 0x20, 0x8f, 0x31, 0xc8, 0x43, 0x04, 0xff,
++      0x64, 0x9e, 0x98, 0xc7, 0x0c, 0xc6, 0x11, 0x1d, 0x29, 0x72, 0x8e, 0x93,
++      0xc3, 0x7a, 0xcf, 0x5a, 0x44, 0xb5, 0xbf, 0x26, 0x7e, 0x9d, 0x1a, 0x6d,
++      0xc7, 0x74, 0x96, 0xb8, 0xb5, 0xb8, 0x1d, 0x6f, 0xe7, 0x36, 0xd1, 0xff,
++      0x55, 0x9c, 0x25, 0x66, 0x69, 0x73, 0x05, 0xd7, 0x05, 0x43, 0xfd, 0xb4,
++      0xd7, 0x0e, 0x59, 0x03, 0x55, 0xe2, 0xc4, 0xac, 0x6b, 0xd2, 0xcf, 0x3a,
++      0xb5, 0x3a, 0x73, 0x2a, 0x35, 0x81, 0x0c, 0x31, 0xcb, 0xce, 0xca, 0x7c,
++      0x6d, 0xc6, 0x56, 0xe2, 0xd5, 0xd6, 0x9c, 0xd8, 0x37, 0x6d, 0x7a, 0x50,
++      0x0f, 0x16, 0x68, 0xdb, 0xea, 0x5e, 0x91, 0x61, 0xa2, 0x8f, 0xb1, 0xfd,
++      0x33, 0x1d, 0x26, 0x76, 0xe4, 0x24, 0x0e, 0x0a, 0x07, 0xd3, 0x98, 0x97,
++      0x24, 0xd1, 0x43, 0x9c, 0x7a, 0xdb, 0xee, 0xc4, 0x0a, 0xe2, 0xd4, 0x2f,
++      0x98, 0xa7, 0xdc, 0x49, 0x9c, 0x7a, 0xc3, 0x2e, 0xe2, 0xd4, 0xcd, 0x13,
++      0x62, 0x0b, 0x45, 0x5e, 0x7e, 0xc2, 0x6e, 0x6b, 0x90, 0xdf, 0x39, 0xab,
++      0x36, 0x7f, 0x57, 0x5c, 0x58, 0x85, 0x97, 0x86, 0xcb, 0x7b, 0xc5, 0x91,
++      0xe4, 0xed, 0xe4, 0xcc, 0x47, 0x47, 0xcb, 0x9c, 0xf7, 0xb8, 0x9b, 0x5b,
++      0xcf, 0x32, 0xcb, 0xfb, 0x96, 0xe5, 0xfd, 0x06, 0x0b, 0x5f, 0x5d, 0x22,
++      0x3c, 0x53, 0xd6, 0x81, 0x2a, 0xc8, 0x27, 0xbb, 0x31, 0xbe, 0xf3, 0x3d,
++      0x3c, 0x32, 0xa8, 0xde, 0x5c, 0xc3, 0xd8, 0x7a, 0x8b, 0xb2, 0x19, 0x9e,
++      0xb8, 0xbc, 0x47, 0x2a, 0x6b, 0xe5, 0xcc, 0x5d, 0x26, 0xb3, 0xe8, 0xdb,
++      0x57, 0x83, 0x43, 0x41, 0xc7, 0x79, 0xda, 0x98, 0x27, 0x3f, 0x13, 0x20,
++      0xb8, 0x19, 0xa8, 0xa0, 0x2f, 0xdc, 0xfc, 0x5b, 0xbf, 0xdd, 0x58, 0xde,
++      0x3b, 0xd8, 0x88, 0xbb, 0x76, 0x3d, 0x8c, 0x9e, 0x5d, 0x7f, 0x8b, 0x4f,
++      0x0e, 0x2d, 0xec, 0x9f, 0xe7, 0x71, 0x9c, 0xab, 0xdb, 0xa7, 0x70, 0x2a,
++      0xce, 0xd8, 0x18, 0x52, 0xf0, 0xbd, 0xab, 0x16, 0x8a, 0x1c, 0xfe, 0xbd,
++      0xef, 0x68, 0xae, 0xbc, 0x5b, 0x4b, 0x3e, 0x92, 0x98, 0xc3, 0xf1, 0x53,
++      0xf6, 0x8a, 0xfa, 0xd2, 0xbb, 0xc2, 0x7f, 0x40, 0x5b, 0x3f, 0x16, 0x19,
++      0xfc, 0x2b, 0xcb, 0x78, 0xcd, 0x49, 0xae, 0x96, 0x7a, 0x15, 0xa5, 0x36,
++      0xfe, 0x96, 0x9c, 0x90, 0xbc, 0xd0, 0xe0, 0xff, 0x91, 0xeb, 0x44, 0x3e,
++      0x9f, 0x95, 0xe5, 0xbf, 0xe4, 0x24, 0xbb, 0xe5, 0xbb, 0x94, 0x59, 0xc7,
++      0x67, 0x52, 0xae, 0xfc, 0xec, 0xf9, 0x92, 0x9c, 0x4a, 0x68, 0x0d, 0x45,
++      0x39, 0x9f, 0xa6, 0x9c, 0x33, 0x8b, 0x93, 0x50, 0xaf, 0x9d, 0x29, 0xab,
++      0xdc, 0xee, 0xff, 0x3a, 0x2f, 0xab, 0x58, 0xee, 0x6f, 0xe6, 0xc8, 0xbe,
++      0x80, 0x7a, 0xed, 0xcc, 0x75, 0xf2, 0x0a, 0xfa, 0x6f, 0x34, 0xb8, 0xd5,
++      0x5d, 0x9f, 0x36, 0xb0, 0xf6, 0xe2, 0x1c, 0x4b, 0xb0, 0x03, 0xe3, 0x76,
++      0xb0, 0x94, 0x53, 0xc9, 0x2d, 0x13, 0x5f, 0x66, 0xce, 0xf6, 0x94, 0x1d,
++      0xe9, 0x5a, 0xa7, 0xb4, 0x26, 0x17, 0x31, 0xce, 0xa0, 0x5e, 0xd6, 0xb0,
++      0x13, 0xee, 0xef, 0xf9, 0xe5, 0xa3, 0x09, 0xe4, 0x69, 0x8f, 0xaf, 0xd8,
++      0x91, 0x0d, 0xa7, 0xdc, 0xfd, 0x3b, 0x13, 0x2f, 0xe7, 0x5f, 0x2d, 0xed,
++      0x33, 0x95, 0x7f, 0x4f, 0x6c, 0xe6, 0x1a, 0xaa, 0xcc, 0xbf, 0x9c, 0xb1,
++      0x6e, 0x90, 0xb5, 0x0a, 0xcb, 0xa2, 0x9f, 0xf7, 0x66, 0xac, 0xb0, 0x8a,
++      0xeb, 0x90, 0x0a, 0xc9, 0xbe, 0xc4, 0xd6, 0xd2, 0x6f, 0x52, 0xb1, 0xde,
++      0xef, 0x58, 0x13, 0x02, 0x8c, 0xd2, 0x39, 0xb6, 0x18, 0xac, 0xc9, 0x2b,
++      0xc8, 0xc5, 0x64, 0xbd, 0x01, 0xd6, 0x6c, 0x53, 0x43, 0x48, 0x3f, 0xcc,
++      0x71, 0xfb, 0x30, 0x87, 0xf9, 0x54, 0x7c, 0x61, 0x6b, 0x77, 0xbb, 0x3a,
++      0x57, 0x70, 0x36, 0x98, 0x54, 0x63, 0x12, 0x07, 0x50, 0x99, 0x96, 0xb3,
++      0x26, 0x56, 0x97, 0x9f, 0x98, 0xba, 0x98, 0xd8, 0x52, 0x11, 0x85, 0xf7,
++      0xbe, 0xbc, 0x17, 0xc1, 0x85, 0xbf, 0x70, 0x7e, 0x18, 0x8a, 0x61, 0xdb,
++      0x64, 0xb9, 0x0f, 0x06, 0xfe, 0x7b, 0xe1, 0xd2, 0x8c, 0xb3, 0x2c, 0xf3,
++      0x3d, 0x27, 0x39, 0x47, 0xda, 0x2e, 0xca, 0xfd, 0xe8, 0xbe, 0x4a, 0x1f,
++      0xa5, 0xaf, 0xcd, 0x1a, 0x51, 0x15, 0x5b, 0x8d, 0x89, 0x39, 0xf2, 0x9b,
++      0x3f, 0xf7, 0xb8, 0x67, 0xd3, 0x65, 0x0e, 0xe4, 0xfd, 0xf1, 0x04, 0xee,
++      0x93, 0xf7, 0x30, 0x19, 0xb3, 0xee, 0xcd, 0xbb, 0xef, 0x77, 0x42, 0x7e,
++      0x17, 0xf1, 0xde, 0x7c, 0x51, 0x7f, 0x0f, 0xe5, 0x03, 0xe4, 0xdd, 0x01,
++      0xcb, 0x6b, 0x6e, 0x80, 0x4f, 0x97, 0x33, 0x67, 0x65, 0x5d, 0xfe, 0xdf,
++      0x73, 0x24, 0x97, 0xff, 0x2a, 0xfd, 0xc9, 0xbb, 0x50, 0x3e, 0x5b, 0xf2,
++      0xae, 0xa2, 0x52, 0xfc, 0x7c, 0xc6, 0x7d, 0xef, 0x5d, 0x35, 0xd7, 0xd1,
++      0x2f, 0x67, 0xbb, 0xef, 0xeb, 0x89, 0x7e, 0x42, 0xa6, 0xe5, 0xcc, 0xd6,
++      0x03, 0xb4, 0x91, 0xde, 0x39, 0xa5, 0x77, 0x0f, 0xba, 0xee, 0x20, 0x8e,
++      0x2c, 0x22, 0xb7, 0x5a, 0xac, 0x44, 0xb4, 0x55, 0x4a, 0x37, 0xeb, 0x51,
++      0x4f, 0x05, 0x91, 0xa1, 0xb8, 0xbf, 0xbd, 0xeb, 0xa3, 0x8c, 0xfd, 0x76,
++      0xab, 0xe6, 0x53, 0x7f, 0x5e, 0x3a, 0x7b, 0x2d, 0x7b, 0xf1, 0x29, 0x3c,
++      0x6f, 0xcf, 0xc1, 0xd4, 0x6f, 0xc9, 0x3d, 0xbf, 0x66, 0xfd, 0x4f, 0x41,
++      0x62, 0x88, 0x4f, 0x8f, 0x6c, 0x8c, 0x7b, 0x22, 0xeb, 0xa7, 0xe9, 0xd3,
++      0x85, 0xb8, 0x9e, 0xfa, 0x1a, 0xdb, 0xf8, 0x3e, 0xb9, 0x85, 0x3d, 0x43,
++      0x7e, 0x51, 0x56, 0x6b, 0x4f, 0x85, 0x7a, 0xc6, 0x29, 0xbe, 0x77, 0x2d,
++      0xbf, 0xfb, 0xbb, 0x06, 0xc1, 0xb4, 0xe5, 0x84, 0x28, 0x73, 0xbe, 0x19,
++      0xd9, 0x53, 0xaf, 0xea, 0xd9, 0xcf, 0xab, 0x9b, 0xb1, 0x56, 0x8e, 0x7c,
++      0x98, 0x11, 0xed, 0xd3, 0xb4, 0x8f, 0x76, 0x57, 0x46, 0x32, 0x56, 0x81,
++      0x8f, 0x3a, 0xd3, 0xc6, 0xf1, 0x41, 0xd6, 0x28, 0x59, 0xce, 0xdd, 0xe3,
++      0x97, 0xf7, 0x77, 0x98, 0x63, 0xdb, 0xf2, 0xbb, 0xa6, 0x6e, 0x33, 0xa5,
++      0x7d, 0x24, 0xe6, 0xc8, 0x8c, 0x97, 0xf7, 0xc8, 0x6f, 0xc8, 0x55, 0x07,
++      0x70, 0xaf, 0x2d, 0xeb, 0x0e, 0xff, 0x3f, 0x45, 0x18, 0xff, 0x64, 0x3c,
++      0x59, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_CP_b09FwData[(0x84/4) + 1] = {
+       0x00000000, 0x0000001b, 0x0000000f, 0x0000000a, 0x00000008, 0x00000006,
+@@ -2057,1088 +2079,1076 @@
+       0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002,
+       0x00000001, 0x00000001, 0x00000001, 0x00000000 };
+ static const u32 bnx2_CP_b09FwRodata[(0x16c/4) + 1] = {
+-      0x80080100, 0x80080080, 0x80080000, 0x08001800, 0x08001800, 0x08001838,
+-      0x08001838, 0x0800184c, 0x0800181c, 0x08001a74, 0x08001a40, 0x08001acc,
+-      0x08001acc, 0x08001b54, 0x08001a84, 0x80080240, 0x080021c4, 0x08002010,
+-      0x080021ec, 0x08002284, 0x080023d4, 0x08002420, 0x08002544, 0x0800244c,
+-      0x080024d0, 0x08002080, 0x080029f8, 0x0800299c, 0x0800202c, 0x0800202c,
+-      0x0800202c, 0x080025b8, 0x080025b8, 0x0800202c, 0x0800202c, 0x08002874,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x080028d4, 0x0800202c,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c,
+-      0x0800202c, 0x08002440, 0x0800202c, 0x0800202c, 0x08002944, 0x0800202c,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c,
+-      0x0800202c, 0x0800202c, 0x0800202c, 0x0800202c, 0x08002798, 0x0800202c,
+-      0x0800202c, 0x08002700, 0x0800265c, 0x080037c0, 0x08003794, 0x08003760,
+-      0x08003734, 0x08003714, 0x080036c8, 0x80080100, 0x80080080, 0x80080000,
++      0x80080100, 0x80080080, 0x80080000, 0x08001744, 0x08001744, 0x0800177c,
++      0x0800177c, 0x08001790, 0x08001760, 0x080019b8, 0x08001984, 0x08001a10,
++      0x08001a10, 0x08001a98, 0x080019c8, 0x80080240, 0x08003260, 0x080031cc,
++      0x08003288, 0x080032b0, 0x080032d8, 0x080032fc, 0x08003344, 0x08003320,
++      0x08003368, 0x08003234, 0x0800345c, 0x0800344c, 0x080031e8, 0x080031e8,
++      0x080031e8, 0x080033bc, 0x080033bc, 0x080031e8, 0x080031e8, 0x0800343c,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x0800342c, 0x080031e8,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8,
++      0x080031e8, 0x0800341c, 0x080031e8, 0x080031e8, 0x0800340c, 0x080031e8,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8,
++      0x080031e8, 0x080031e8, 0x080031e8, 0x080031e8, 0x080033f4, 0x080031e8,
++      0x080031e8, 0x080033e4, 0x080033d4, 0x08003d6c, 0x08003d40, 0x08003d0c,
++      0x08003ce0, 0x08003cc0, 0x08003c74, 0x80080100, 0x80080080, 0x80080000,
+       0x80080080, 0x00000000 };
+ static struct fw_info bnx2_cp_fw_09 = {
+-      /* Firmware version: 4.6.15 */
++      /* Firmware version: 4.4.23 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0xf,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x17,
+       .start_addr                     = 0x08000080,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x5418,
++      .text_len                       = 0x5938,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_CP_b09FwText,
+       .gz_text_len                    = sizeof(bnx2_CP_b09FwText),
+-      .data_addr                      = 0x080055a0,
++      .data_addr                      = 0x08005ac0,
+       .data_len                       = 0x84,
+       .data_index                     = 0x0,
+       .data                           = bnx2_CP_b09FwData,
+-      .sbss_addr                      = 0x08005624,
++      .sbss_addr                      = 0x08005b44,
+       .sbss_len                       = 0x91,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x080056b8,
++      .bss_addr                       = 0x08005bd8,
+       .bss_len                        = 0x19c,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x08005418,
++      .rodata_addr                    = 0x08005938,
+       .rodata_len                     = 0x16c,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_CP_b09FwRodata,
+ };
+ static u8 bnx2_RXP_b09FwText[] = {
+-      0xec, 0x5c, 0x7d, 0x70, 0x1c, 0xe5, 0x79, 0xff, 0xbd, 0x7b, 0x7b, 0xd2,
+-      0x4a, 0x3a, 0x9d, 0x56, 0xa7, 0x93, 0x7c, 0x22, 0x04, 0xef, 0xa2, 0x3d,
+-      0xf9, 0xb0, 0x0c, 0xec, 0x9d, 0x4f, 0xb6, 0xa0, 0xdb, 0xb2, 0x83, 0x0d,
+-      0x11, 0x21, 0x13, 0x84, 0x4d, 0x52, 0x33, 0x49, 0x27, 0x37, 0xc6, 0x18,
+-      0x81, 0x4d, 0x70, 0x0d, 0x6d, 0x55, 0x86, 0x19, 0x6f, 0x2c, 0x7f, 0x01,
+-      0x27, 0x9d, 0x62, 0x64, 0x63, 0xd2, 0x0e, 0x68, 0x6c, 0x59, 0x08, 0x7c,
+-      0xd2, 0x61, 0x20, 0xad, 0xe8, 0x84, 0xfa, 0x26, 0xd8, 0xe0, 0x94, 0xcf,
+-      0x21, 0x0c, 0xc3, 0x1f, 0xcd, 0xa0, 0x62, 0x3e, 0xcc, 0x94, 0xa1, 0x26,
+-      0x38, 0xa9, 0xdd, 0xb8, 0x7e, 0xfb, 0x3c, 0x7b, 0x3a, 0x9b, 0x90, 0x26,
+-      0x9d, 0xfc, 0xd1, 0xff, 0xf6, 0x99, 0xb9, 0xb9, 0xbd, 0x77, 0xdf, 0xf7,
+-      0xf9, 0xfe, 0x7c, 0x3d, 0xf2, 0x5f, 0x47, 0x50, 0x8f, 0x39, 0x68, 0xa4,
+-      0x4f, 0x76, 0xc3, 0xc0, 0xc6, 0xf4, 0x65, 0x4b, 0x2e, 0xa3, 0xc7, 0xee,
+-      0x50, 0x53, 0x8d, 0xca, 0xeb, 0x02, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01,
+-      0x04, 0x10, 0x40, 0x00, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0x04, 0x10,
+-      0x40, 0x00, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0x04, 0x10, 0x40, 0x00,
+-      0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0x04,
+-      0x10, 0x40, 0x00, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0x04, 0x10, 0x40,
+-      0x00, 0x01, 0x04, 0x10, 0x40, 0x00, 0x01, 0xfc, 0x7f, 0x40, 0x08, 0xd0,
+-      0xf9, 0xbb, 0x71, 0xee, 0x03, 0x4d, 0x71, 0xdc, 0x7b, 0xaf, 0xb6, 0xa0,
+-      0x85, 0x9c, 0x99, 0x7b, 0x6f, 0xb1, 0x00, 0xb7, 0xd8, 0x65, 0x2c, 0xc3,
+-      0x7f, 0x4b, 0x2f, 0xae, 0x82, 0xd7, 0xbf, 0xea, 0x9c, 0x79, 0xec, 0xf9,
+-      0xa5, 0xe6, 0x89, 0xb1, 0x10, 0x34, 0xdd, 0x79, 0x27, 0xad, 0x77, 0x42,
+-      0xbb, 0x90, 0xce, 0xfc, 0xfd, 0x82, 0x95, 0x31, 0x44, 0xab, 0xb8, 0xe0,
+-      0x29, 0x8e, 0x94, 0xfb, 0x6d, 0x89, 0x17, 0x6d, 0x4f, 0x2c, 0xcb, 0xc2,
+-      0xd3, 0x9c, 0x19, 0x51, 0x37, 0x74, 0x56, 0x1a, 0xe1, 0x0a, 0xe5, 0x35,
+-      0x45, 0x05, 0xaa, 0xa5, 0xe1, 0xd6, 0xf1, 0x7a, 0xac, 0x1d, 0x6b, 0xc0,
+-      0x9a, 0xb1, 0x04, 0x6e, 0x2b, 0x42, 0x0f, 0x39, 0x1a, 0x66, 0x43, 0x33,
+-      0x22, 0x34, 0x85, 0x5c, 0xd8, 0x39, 0x75, 0xc3, 0xde, 0xfc, 0x59, 0xe9,
+-      0xfa, 0x7f, 0x63, 0x52, 0xbe, 0x61, 0xdc, 0x7f, 0x0f, 0x45, 0x75, 0x0e,
+-      0xd3, 0x33, 0xef, 0x3b, 0x75, 0xc3, 0xbe, 0xe2, 0x71, 0xf9, 0xfc, 0x82,
+-      0x38, 0x0e, 0x95, 0x74, 0x3c, 0x55, 0xda, 0x4f, 0x3c, 0x98, 0x9e, 0x07,
+-      0xcd, 0x53, 0x1d, 0x0f, 0x5b, 0xb3, 0x61, 0x4c, 0x8c, 0x9c, 0x95, 0x21,
+-      0xcb, 0x34, 0xa0, 0x58, 0xfa, 0x0b, 0xa0, 0x7d, 0x05, 0xda, 0x57, 0x08,
+-      0x63, 0xef, 0x58, 0x29, 0x86, 0xfa, 0x04, 0x9e, 0x5f, 0xc0, 0xe7, 0xf9,
+-      0x2c, 0xe3, 0x78, 0x3b, 0x5a, 0x3d, 0x5f, 0x43, 0xe7, 0x8f, 0x64, 0x81,
+-      0xf1, 0x91, 0x3e, 0x3a, 0x2a, 0x31, 0x68, 0xd7, 0x62, 0xb5, 0x0e, 0xaf,
+-      0xce, 0x61, 0x5c, 0x55, 0x3c, 0x9e, 0x30, 0xa6, 0x8e, 0x34, 0x55, 0xf0,
+-      0x40, 0x68, 0x16, 0xbc, 0xda, 0x2f, 0xbd, 0x3f, 0x5e, 0xac, 0xbe, 0xdf,
+-      0x41, 0x74, 0x34, 0xd2, 0xc3, 0x06, 0xfc, 0x73, 0xa9, 0x1f, 0xff, 0x50,
+-      0xca, 0xe1, 0xd9, 0x52, 0x1f, 0xd1, 0xbd, 0x87, 0xe8, 0xae, 0xc7, 0x3f,
+-      0x96, 0xd6, 0xe0, 0xc7, 0xa5, 0xef, 0xe2, 0x99, 0xd2, 0x2a, 0x3c, 0x5d,
+-      0xba, 0x09, 0x07, 0x4b, 0x1e, 0xc2, 0xdd, 0x8c, 0x2f, 0x25, 0x3e, 0xcb,
+-      0xd7, 0x11, 0x1f, 0x5b, 0x30, 0x5b, 0x64, 0x79, 0x24, 0x46, 0x6c, 0x73,
+-      0x0c, 0x58, 0x90, 0xa8, 0x81, 0xc0, 0x6a, 0xdb, 0x7c, 0x0a, 0xb8, 0x0d,
+-      0x6e, 0xdc, 0x3c, 0xc1, 0x5a, 0x7a, 0x62, 0xc4, 0x40, 0x98, 0xf8, 0xb5,
+-      0xd2, 0x6d, 0xd8, 0xaa, 0xf7, 0xa1, 0xde, 0x1a, 0xc2, 0x03, 0xbe, 0x8d,
+-      0xa1, 0x45, 0x9c, 0x7f, 0x45, 0x7e, 0x48, 0xe0, 0xc1, 0x24, 0x34, 0x41,
+-      0xcf, 0x5d, 0xc5, 0xbf, 0x6b, 0xa9, 0xd8, 0x8c, 0x78, 0x28, 0x10, 0x5f,
+-      0x05, 0xe2, 0xa3, 0x40, 0xbc, 0x15, 0x88, 0x97, 0x02, 0xf1, 0x57, 0x20,
+-      0x7e, 0x0a, 0xc4, 0x4f, 0x81, 0xf8, 0x29, 0x10, 0xaf, 0x05, 0xd6, 0xf9,
+-      0x00, 0xc9, 0x52, 0xb1, 0x71, 0xab, 0x63, 0x63, 0xac, 0xd4, 0x26, 0xf6,
+-      0xee, 0x56, 0xc5, 0x73, 0xc3, 0x06, 0xe6, 0x3b, 0x88, 0x3c, 0xbd, 0xc4,
+-      0x2a, 0x5f, 0x15, 0xea, 0x9a, 0x49, 0xc0, 0x4d, 0xcf, 0x83, 0x8d, 0x89,
+-      0x92, 0x2a, 0xa6, 0x87, 0xa5, 0x5c, 0x69, 0xbb, 0x68, 0x72, 0xcc, 0x9e,
+-      0x8d, 0x8a, 0xd5, 0xff, 0xba, 0x68, 0xc4, 0x2f, 0x47, 0x7a, 0x31, 0xd6,
+-      0xec, 0xe2, 0x70, 0xd6, 0xc0, 0xb2, 0x8c, 0x82, 0x5c, 0xdc, 0xc3, 0xb6,
+-      0xac, 0x69, 0x7b, 0x18, 0x45, 0x39, 0xce, 0xe7, 0x34, 0xd2, 0xb5, 0x87,
+-      0x64, 0xb7, 0x86, 0xc9, 0x11, 0x17, 0x35, 0xe9, 0x1a, 0x94, 0xfb, 0x58,
+-      0x7f, 0x2a, 0xc9, 0xb4, 0x0f, 0xf5, 0xb1, 0x18, 0x1a, 0xac, 0x4b, 0xd0,
+-      0x10, 0xe3, 0x35, 0x88, 0x56, 0xd2, 0xd5, 0x3c, 0xe7, 0x02, 0xf1, 0xf9,
+-      0xee, 0x28, 0x3e, 0x1d, 0xd5, 0x50, 0xda, 0xa9, 0xe2, 0x1b, 0x19, 0x29,
+-      0xff, 0x2a, 0xa3, 0xf6, 0x7f, 0x2a, 0x1c, 0x4c, 0x95, 0x54, 0x7c, 0x9e,
+-      0x4f, 0xc3, 0x6b, 0xd6, 0xf0, 0x9f, 0x79, 0x0f, 0x21, 0xc2, 0x3b, 0x40,
+-      0x78, 0x6b, 0x17, 0xa7, 0x30, 0x1b, 0x67, 0x71, 0xfa, 0xb0, 0x31, 0xdf,
+-      0xb1, 0x63, 0xa3, 0x52, 0x03, 0xa3, 0x06, 0x64, 0xff, 0x2c, 0x36, 0xe5,
+-      0x3b, 0x8e, 0x6e, 0x52, 0xb6, 0xe0, 0xe2, 0x5a, 0x0d, 0x9b, 0x87, 0x79,
+-      0x6d, 0x39, 0xca, 0x45, 0x41, 0xfe, 0xf0, 0xc7, 0xea, 0x6b, 0x26, 0x42,
+-      0x7e, 0x65, 0xfc, 0xf1, 0x7a, 0x4e, 0x34, 0xa2, 0xde, 0x34, 0xca, 0x58,
+-      0x1f, 0xe7, 0xf3, 0x39, 0xe5, 0x5d, 0xe9, 0xc6, 0x99, 0x0f, 0xcd, 0x0b,
+-      0x91, 0x6e, 0x6e, 0xc9, 0x66, 0xb1, 0x26, 0xdf, 0xa1, 0xaf, 0x51, 0x48,
+-      0xdb, 0x6a, 0xc5, 0xc6, 0x71, 0x07, 0xe9, 0xd1, 0x61, 0x81, 0x91, 0x4e,
+-      0xb6, 0x31, 0xd2, 0x76, 0xd1, 0x8f, 0x09, 0xc3, 0x50, 0x2a, 0x31, 0xf1,
+-      0x58, 0x36, 0x89, 0xb3, 0x0f, 0xf1, 0x6f, 0x15, 0x3f, 0x5b, 0x9a, 0xc4,
+-      0xc7, 0xfb, 0x4a, 0x73, 0x71, 0xfb, 0x68, 0xa4, 0xb2, 0xef, 0x1a, 0xa2,
+-      0xc9, 0x32, 0x32, 0xae, 0xc9, 0x7b, 0x47, 0x3b, 0x6b, 0xe9, 0x77, 0xc5,
+-      0xd6, 0xfd, 0xf9, 0x0e, 0xbb, 0x5f, 0xd1, 0x50, 0x4e, 0x44, 0x48, 0xf7,
+-      0xd0, 0xea, 0x08, 0xff, 0x25, 0x43, 0x67, 0xb0, 0x22, 0x63, 0x4e, 0xf2,
+-      0xdf, 0x80, 0x25, 0x93, 0x15, 0x9a, 0xc9, 0xa2, 0x8d, 0x03, 0x25, 0x1b,
+-      0x77, 0xe4, 0x3b, 0xdc, 0x95, 0x62, 0x16, 0x68, 0x5f, 0x98, 0x9b, 0x54,
+-      0x7e, 0x21, 0xbd, 0x56, 0xa6, 0xb3, 0x10, 0x93, 0xb1, 0x8e, 0x81, 0x49,
+-      0xc5, 0xdc, 0xd3, 0xaf, 0x48, 0xf9, 0xab, 0xb4, 0x82, 0xaf, 0x65, 0xb2,
+-      0x98, 0xd5, 0x75, 0xdc, 0x9c, 0xd1, 0xbc, 0x16, 0xe2, 0x71, 0xc3, 0x12,
+-      0x0d, 0x17, 0xed, 0x74, 0xf1, 0xf6, 0xe2, 0x9f, 0xa3, 0xbc, 0x82, 0x75,
+-      0xcf, 0x7c, 0xb1, 0x1c, 0x09, 0xc4, 0xac, 0x3a, 0xc4, 0xf6, 0x86, 0x31,
+-      0x6f, 0xe7, 0x59, 0x99, 0xb0, 0x78, 0xdd, 0x9a, 0x3c, 0xa5, 0xb0, 0x0c,
+-      0x61, 0xb4, 0xee, 0xbd, 0x82, 0x72, 0x8a, 0x99, 0x02, 0xbe, 0x16, 0xe7,
+-      0xbd, 0x35, 0x56, 0x55, 0x96, 0x08, 0x76, 0xef, 0xac, 0xc8, 0xff, 0x68,
+-      0xb6, 0x07, 0x2f, 0x15, 0xb0, 0xaf, 0x0d, 0x3f, 0xc0, 0xc8, 0x12, 0xce,
+-      0x4f, 0x8c, 0x63, 0x88, 0x64, 0xff, 0xc1, 0x89, 0x70, 0xa6, 0x6a, 0xe3,
+-      0xea, 0x39, 0x81, 0x6f, 0x5e, 0x29, 0xf0, 0x6a, 0x7a, 0x5a, 0x8e, 0xb5,
+-      0x32, 0xbf, 0x0f, 0x37, 0x56, 0xfe, 0x16, 0xae, 0xee, 0x94, 0x8b, 0x36,
+-      0xa2, 0x55, 0xdd, 0xc7, 0x38, 0x2e, 0x69, 0x25, 0xfd, 0xa5, 0x66, 0xf1,
+-      0x5f, 0x11, 0xd4, 0xb3, 0x9d, 0xef, 0x96, 0x46, 0x4b, 0x85, 0xe6, 0xfd,
+-      0x44, 0xb3, 0x63, 0x48, 0xc5, 0xe6, 0x7c, 0xc7, 0xa9, 0xf7, 0x94, 0xef,
+-      0xcb, 0xd9, 0xf9, 0x4c, 0xa7, 0xc3, 0x3e, 0xa6, 0x08, 0xfc, 0x54, 0x35,
+-      0x67, 0x72, 0x48, 0x60, 0xb2, 0x04, 0xaf, 0xdd, 0xd1, 0x29, 0xfe, 0xe3,
+-      0x94, 0x07, 0x0c, 0xd1, 0xf9, 0xb0, 0x8d, 0x85, 0x43, 0xdf, 0x85, 0xb5,
+-      0xcb, 0xc1, 0x4c, 0xc1, 0xc6, 0x54, 0x41, 0xca, 0xed, 0xb6, 0x94, 0xef,
+-      0xda, 0xe6, 0x86, 0xe3, 0x21, 0xb8, 0x97, 0x2f, 0xed, 0x4a, 0xd5, 0x86,
+-      0x54, 0xd6, 0x4d, 0xee, 0x75, 0x91, 0x5c, 0xb5, 0x5f, 0xf4, 0xe2, 0x89,
+-      0x92, 0x81, 0x62, 0x29, 0x85, 0x27, 0x4b, 0xac, 0x7f, 0x8b, 0xbe, 0x17,
+-      0x51, 0x7c, 0x66, 0x29, 0xb7, 0x30, 0xbf, 0x3a, 0xc6, 0x17, 0xd8, 0x98,
+-      0x2c, 0x28, 0x08, 0x91, 0xce, 0x73, 0x3a, 0xed, 0x2f, 0x9c, 0x25, 0xdb,
+-      0x69, 0xe8, 0xf8, 0xa1, 0x8b, 0xdb, 0xed, 0x16, 0x18, 0x37, 0x5a, 0x18,
+-      0x2f, 0x68, 0x94, 0xbb, 0x55, 0xf4, 0xe6, 0xc7, 0x31, 0xaf, 0x39, 0x4e,
+-      0xb1, 0x26, 0xb0, 0x2a, 0x13, 0x01, 0x56, 0xf2, 0xbb, 0x08, 0xda, 0xad,
+-      0x32, 0xda, 0x63, 0x8d, 0x98, 0xbf, 0xf0, 0x9f, 0x30, 0xdb, 0x12, 0x25,
+-      0x1d, 0xd7, 0x93, 0x1e, 0x04, 0x54, 0xb2, 0x53, 0x9b, 0x65, 0x11, 0x4e,
+-      0x01, 0x2b, 0x49, 0x7b, 0x29, 0x7e, 0x13, 0x24, 0x7b, 0x78, 0x69, 0x1c,
+-      0x8f, 0x13, 0xff, 0xa5, 0xbc, 0x94, 0x91, 0xac, 0xb9, 0x61, 0x3b, 0xe5,
+-      0x84, 0xe9, 0x62, 0x0f, 0x4a, 0xa5, 0x6f, 0x62, 0x6a, 0x84, 0xf8, 0xcc,
+-      0x3b, 0xc4, 0x93, 0xaa, 0x17, 0x85, 0xd9, 0xb7, 0x5a, 0x64, 0xf1, 0x24,
+-      0xf9, 0xce, 0x44, 0xc1, 0x34, 0x8e, 0x93, 0x9f, 0xbd, 0x60, 0x37, 0x10,
+-      0x9f, 0x2e, 0xe1, 0x32, 0xf0, 0x5c, 0xbe, 0x00, 0xab, 0x85, 0xed, 0x15,
+-      0xc1, 0xfd, 0x3b, 0xb3, 0x84, 0x13, 0x83, 0x75, 0xf0, 0xa0, 0x2e, 0xf1,
+-      0x4e, 0x6c, 0xb5, 0x87, 0x22, 0x55, 0x1f, 0xaf, 0x27, 0x9a, 0x7d, 0xdd,
+-      0x36, 0x42, 0xc3, 0x3d, 0x84, 0x97, 0xfc, 0x15, 0xb7, 0x92, 0xbf, 0x7a,
+-      0xb8, 0x9c, 0xe2, 0x21, 0xea, 0xec, 0x49, 0xbf, 0x36, 0xe4, 0xc9, 0x5a,
+-      0xcb, 0xea, 0xff, 0x48, 0x6c, 0xc2, 0x27, 0x69, 0xb6, 0x83, 0x4a, 0xf2,
+-      0xea, 0x78, 0x39, 0x3d, 0x82, 0x57, 0x8b, 0x7f, 0x82, 0x5c, 0xb3, 0x99,
+-      0xda, 0x2c, 0xd6, 0x61, 0x66, 0xe4, 0x0a, 0xe0, 0xcf, 0xd9, 0x7e, 0x02,
+-      0xf3, 0xad, 0x75, 0x38, 0x34, 0x76, 0x2f, 0x8e, 0x8c, 0xd6, 0xe3, 0x39,
+-      0x2b, 0x86, 0xf6, 0x89, 0x0a, 0x9d, 0x6b, 0xe6, 0x72, 0x93, 0x9e, 0xa6,
+-      0xe0, 0x6b, 0xe3, 0x98, 0x14, 0xb8, 0x3e, 0xb3, 0x0e, 0x39, 0xdf, 0xcf,
+-      0x3d, 0xac, 0xa1, 0xdc, 0x96, 0xcf, 0xbb, 0x14, 0xd7, 0x75, 0xd8, 0xd9,
+-      0x0c, 0x71, 0x0b, 0xd5, 0x93, 0x3b, 0x29, 0x5e, 0xef, 0x54, 0x62, 0x70,
+-      0x13, 0x2e, 0xd9, 0x55, 0xe0, 0x22, 0xcb, 0xc0, 0x9e, 0x22, 0x70, 0x77,
+-      0x51, 0xc5, 0xdf, 0x14, 0x2f, 0x45, 0xb9, 0x8d, 0xcf, 0x2e, 0x40, 0x79,
+-      0x1e, 0x7f, 0x87, 0x31, 0x16, 0x33, 0x13, 0x20, 0x9d, 0xed, 0x2f, 0xa8,
+-      0xf8, 0xb1, 0xbd, 0xeb, 0xec, 0xd8, 0x0a, 0x53, 0xcf, 0x51, 0xac, 0x85,
+-      0xac, 0xd3, 0xe4, 0x67, 0xfc, 0x0c, 0x7c, 0x3f, 0xff, 0x99, 0xfc, 0xb9,
+-      0x4f, 0x53, 0xc5, 0x6d, 0xf9, 0x8e, 0x81, 0x8f, 0x94, 0x8f, 0xe5, 0xbf,
+-      0x85, 0x19, 0xff, 0x77, 0xa2, 0x15, 0x7f, 0xdd, 0xc3, 0x79, 0xc4, 0xad,
+-      0xf8, 0xed, 0xbc, 0x2f, 0xf8, 0x6d, 0xc5, 0x3f, 0x47, 0xb2, 0xcc, 0x47,
+-      0x35, 0xc6, 0x62, 0xb8, 0x68, 0x22, 0x89, 0xba, 0x9d, 0xfc, 0x9b, 0xd7,
+-      0x05, 0x2e, 0xee, 0xe6, 0xf8, 0x4a, 0x42, 0xd9, 0x7b, 0x2d, 0xe1, 0x63,
+-      0xd9, 0xab, 0xb9, 0xe2, 0x7b, 0x73, 0xf8, 0xcf, 0xe7, 0x98, 0x76, 0xc2,
+-      0xb7, 0x74, 0x29, 0x3f, 0xf3, 0x99, 0x3a, 0xfc, 0x7a, 0xaf, 0x69, 0x97,
+-      0x95, 0xa5, 0x44, 0x93, 0x63, 0x92, 0x63, 0xf3, 0x2f, 0xe6, 0xce, 0x24,
+-      0xc8, 0xce, 0xd3, 0xb2, 0xbc, 0x8a, 0xf1, 0x55, 0xcf, 0x27, 0x11, 0x3a,
+-      0x47, 0x57, 0xc5, 0xea, 0xec, 0x97, 0xe9, 0xda, 0x94, 0xf7, 0x5b, 0xd1,
+-      0xb0, 0xd0, 0x22, 0x3b, 0xb5, 0xa1, 0x91, 0xe2, 0x3a, 0x62, 0xad, 0x92,
+-      0x91, 0x6f, 0xb3, 0x8f, 0x6a, 0x5e, 0xd8, 0xf9, 0x0a, 0x4a, 0x23, 0xcf,
+-      0x93, 0x7d, 0xa3, 0xec, 0x8b, 0x1b, 0x3e, 0x12, 0x5f, 0xc1, 0xf4, 0x98,
+-      0x88, 0xb2, 0xac, 0xab, 0x28, 0xb6, 0xe7, 0x53, 0x7d, 0xf8, 0xe0, 0xe1,
+-      0xbb, 0xe4, 0x58, 0x9f, 0x8e, 0x17, 0xb3, 0x49, 0x5a, 0x67, 0x5f, 0xb2,
+-      0xf1, 0x4c, 0x5e, 0xc3, 0xee, 0xe1, 0x84, 0xef, 0xc7, 0xf7, 0x74, 0xd6,
+-      0x9d, 0x2a, 0x2b, 0x36, 0x9e, 0x25, 0x3f, 0x3c, 0x58, 0x60, 0x1d, 0xab,
+-      0xb8, 0x38, 0xf3, 0x75, 0x59, 0xd3, 0xc6, 0xbe, 0x1d, 0xa1, 0x33, 0x3a,
+-      0xe1, 0x8e, 0x42, 0xb7, 0x96, 0xcb, 0x37, 0x56, 0xf0, 0x73, 0x03, 0xad,
+-      0xb5, 0xd1, 0xf7, 0x12, 0xd9, 0xf8, 0x3b, 0x7c, 0xe8, 0xff, 0x1b, 0x1f,
+-      0xf4, 0x1d, 0xa3, 0x75, 0x90, 0xbf, 0xcc, 0x88, 0xd5, 0x95, 0xfe, 0x46,
+-      0x53, 0xad, 0x19, 0xb1, 0xc6, 0xef, 0x69, 0xfc, 0x34, 0x4e, 0x38, 0x7a,
+-      0xb1, 0x77, 0x54, 0xca, 0x2d, 0x76, 0x3b, 0x5c, 0x3d, 0x86, 0x2d, 0x16,
+-      0xc5, 0xeb, 0x28, 0x9f, 0x91, 0x32, 0x95, 0x5e, 0xd8, 0xa3, 0x8a, 0x16,
+-      0xca, 0x99, 0x9e, 0x58, 0x9b, 0x35, 0xc4, 0x9d, 0xa3, 0x2a, 0xf2, 0x85,
+-      0x0b, 0x28, 0x27, 0x4b, 0xf9, 0x64, 0x1a, 0xee, 0x60, 0xba, 0x01, 0x2f,
+-      0x8f, 0xe9, 0x14, 0x3b, 0x67, 0xe5, 0xf2, 0x64, 0x2f, 0x4a, 0x84, 0xe7,
+-      0xd3, 0x74, 0x57, 0xea, 0xb0, 0x88, 0x60, 0x2c, 0x1e, 0xc1, 0x9e, 0x42,
+-      0x1c, 0x87, 0xc7, 0x23, 0xd8, 0x46, 0xfe, 0xf7, 0xd3, 0x2c, 0xd3, 0x8c,
+-      0x60, 0x73, 0x89, 0x7b, 0x8d, 0x10, 0xe9, 0xc0, 0x13, 0xef, 0xf9, 0x6b,
+-      0x0d, 0x58, 0x3e, 0xc6, 0x7b, 0xcf, 0xca, 0x76, 0xcb, 0xd2, 0xdb, 0x43,
+-      0xd5, 0x7d, 0xef, 0x50, 0x1f, 0x63, 0x50, 0xef, 0x72, 0x21, 0xe5, 0xaa,
+-      0x04, 0xf5, 0x2a, 0x71, 0xea, 0x55, 0xac, 0xb9, 0xfe, 0xcb, 0xa4, 0x48,
+-      0x93, 0xf2, 0x19, 0xca, 0x53, 0x6f, 0xd2, 0xe7, 0xa4, 0x4d, 0xe5, 0x96,
+-      0x64, 0xbc, 0x78, 0x98, 0x65, 0xf4, 0x84, 0xbd, 0x84, 0x3a, 0xce, 0x69,
+-      0xd3, 0x70, 0x95, 0x5f, 0x50, 0x9f, 0x65, 0xa0, 0x63, 0x9a, 0x79, 0x50,
+-      0xb1, 0xb5, 0x00, 0x0c, 0x16, 0xe0, 0x1d, 0xa6, 0xd8, 0x6e, 0x99, 0x88,
+-      0x22, 0x36, 0xa1, 0x23, 0x3c, 0x91, 0xa2, 0xbd, 0x1a, 0xe2, 0xf4, 0xdb,
+-      0xa3, 0xbe, 0xab, 0xc9, 0x69, 0x13, 0x8b, 0x76, 0x9f, 0x91, 0x0f, 0x52,
+-      0xac, 0xdd, 0x91, 0x34, 0x7b, 0x6f, 0x14, 0x70, 0x53, 0x43, 0x52, 0xd6,
+-      0xa6, 0x6b, 0xa9, 0x7e, 0xcb, 0x43, 0x71, 0x92, 0x3d, 0xea, 0xc8, 0x4d,
+-      0xaf, 0x76, 0x5b, 0xf6, 0xab, 0x20, 0xbc, 0x25, 0x3e, 0xc3, 0xeb, 0x9e,
+-      0xf8, 0xac, 0xdb, 0xda, 0xf3, 0x16, 0x3a, 0xb1, 0x78, 0x42, 0x15, 0xbf,
+-      0x1c, 0x5a, 0x84, 0xcc, 0x34, 0xf4, 0x1a, 0xe2, 0xeb, 0xc3, 0x29, 0xe2,
+-      0xbb, 0x40, 0xb2, 0x14, 0x48, 0x96, 0x02, 0xc9, 0x42, 0x7a, 0x39, 0xe8,
+-      0xf7, 0x6d, 0x2c, 0x6b, 0x8a, 0xea, 0xef, 0x3b, 0x7e, 0x6f, 0x79, 0xb0,
+-      0xc4, 0x72, 0x98, 0xae, 0x07, 0x96, 0x9b, 0xe5, 0x94, 0xf2, 0x2d, 0x9b,
+-      0xe5, 0x31, 0x0d, 0x4f, 0x21, 0x6b, 0x4d, 0x1b, 0x48, 0x4d, 0x57, 0xf5,
+-      0x21, 0xe5, 0xe7, 0x36, 0xeb, 0x83, 0x65, 0x94, 0xf2, 0x69, 0x92, 0x69,
+-      0x2b, 0xc9, 0x38, 0x58, 0x90, 0x87, 0x6a, 0x2c, 0xcb, 0x98, 0x20, 0xde,
+-      0x62, 0x24, 0x53, 0x7c, 0x42, 0x23, 0x59, 0x3b, 0xa1, 0x92, 0xac, 0xa1,
+-      0x09, 0xe8, 0x0a, 0xeb, 0x69, 0xfa, 0xff, 0xe2, 0x87, 0xfb, 0x6a, 0x4f,
+-      0x5c, 0x43, 0xfd, 0xb4, 0x4a, 0xfb, 0x07, 0xc9, 0x77, 0x72, 0x2a, 0x8c,
+-      0x5a, 0x4b, 0xa1, 0x3c, 0xac, 0xe1, 0xf1, 0xf1, 0x06, 0x4c, 0x90, 0xdd,
+-      0xc7, 0xc6, 0xa1, 0x87, 0xe9, 0xfd, 0xd6, 0x73, 0xfe, 0x04, 0xf2, 0xa7,
+-      0x0d, 0x18, 0xa7, 0xfc, 0xf3, 0x40, 0x3e, 0x26, 0x26, 0x46, 0x54, 0x6c,
+-      0x29, 0x9c, 0x20, 0xd9, 0x24, 0xe5, 0xd8, 0xcd, 0x09, 0xda, 0x22, 0x36,
+-      0xdb, 0x66, 0x0f, 0x70, 0x05, 0xf9, 0x5a, 0x08, 0x6b, 0x2d, 0xb8, 0xdb,
+-      0xed, 0x2b, 0x30, 0xdb, 0x07, 0x63, 0x87, 0xed, 0xe9, 0x35, 0x30, 0x8f,
+-      0x5e, 0x43, 0xa3, 0xc0, 0xe5, 0x24, 0xc7, 0x80, 0xe5, 0x6d, 0xa0, 0x84,
+-      0x44, 0xf9, 0xdb, 0xec, 0x3f, 0x42, 0x36, 0x28, 0x52, 0x5d, 0x2b, 0x52,
+-      0x0f, 0x78, 0x60, 0xf4, 0x8c, 0xbc, 0x3d, 0x6d, 0xba, 0x49, 0x5a, 0x0b,
+-      0x0f, 0x69, 0xd8, 0x5f, 0xd2, 0x28, 0x5e, 0x4c, 0x1b, 0xe0, 0x98, 0x87,
+-      0x56, 0x4b, 0x3d, 0xda, 0x47, 0xd6, 0xa3, 0xd4, 0x0b, 0x6b, 0xa0, 0x3e,
+-      0x19, 0x57, 0x8f, 0x08, 0xec, 0xa7, 0xf8, 0x9d, 0x5a, 0x64, 0x1e, 0x5d,
+-      0x0d, 0xaf, 0xdc, 0x0e, 0x73, 0xa0, 0x96, 0x18, 0xf9, 0x74, 0xa8, 0x86,
+-      0xfa, 0xc2, 0x4e, 0xfb, 0x35, 0x98, 0xfa, 0xfe, 0xd0, 0xaf, 0xe4, 0x64,
+-      0x1c, 0x17, 0x84, 0x71, 0x52, 0x1a, 0xdf, 0xe2, 0x33, 0x2c, 0xf7, 0x06,
+-      0x6c, 0xcf, 0x42, 0x0b, 0x3b, 0x6a, 0x7a, 0x7f, 0x1e, 0x38, 0x96, 0x37,
+-      0x30, 0xb9, 0xa8, 0x0e, 0x68, 0xee, 0xe8, 0xb9, 0x03, 0xde, 0xaa, 0xb0,
+-      0xdf, 0xe7, 0x6a, 0xe9, 0x3c, 0xf9, 0xc8, 0x7a, 0x21, 0xf0, 0x24, 0xd1,
+-      0x5a, 0x30, 0xc5, 0x7d, 0x89, 0x9a, 0x5e, 0x48, 0x79, 0x76, 0x5b, 0x49,
+-      0xa0, 0xd6, 0x32, 0xf5, 0x59, 0xb0, 0x6e, 0x74, 0xd2, 0xe9, 0x19, 0x89,
+-      0x66, 0x96, 0xdd, 0xcb, 0x91, 0x9c, 0xab, 0xb6, 0x12, 0xff, 0x6b, 0x48,
+-      0xa6, 0xdb, 0x2d, 0xaf, 0x87, 0xb0, 0x52, 0xed, 0x31, 0x13, 0x1f, 0x90,
+-      0xec, 0x6b, 0x29, 0x47, 0x8c, 0x95, 0x86, 0x9b, 0x38, 0x1f, 0x4c, 0x94,
+-      0x78, 0x4e, 0xea, 0xc1, 0xd5, 0xf9, 0x6a, 0x2c, 0xb0, 0xdd, 0xd9, 0xe6,
+-      0x17, 0xfa, 0xf5, 0xfb, 0xa0, 0xef, 0x23, 0xdc, 0x3f, 0xf5, 0x60, 0xb4,
+-      0x53, 0xa1, 0xde, 0x5c, 0xca, 0x15, 0x96, 0x39, 0xc2, 0xf9, 0x99, 0x7c,
+-      0xdd, 0xdd, 0x67, 0x37, 0x51, 0x6c, 0xc2, 0x7b, 0xc2, 0x36, 0x50, 0xe3,
+-      0xb0, 0x4f, 0x34, 0x90, 0x8f, 0x47, 0xb0, 0x9d, 0x7c, 0x44, 0xb3, 0xac,
+-      0x14, 0x35, 0x53, 0xfa, 0xb1, 0x2c, 0xed, 0x2d, 0xc1, 0x28, 0xd9, 0xf5,
+-      0x98, 0x6d, 0x55, 0xd1, 0xec, 0x1c, 0x92, 0x2d, 0xd6, 0x7f, 0x10, 0x7d,
+-      0x4b, 0xbf, 0x1b, 0xab, 0x61, 0xb4, 0x1a, 0x68, 0x70, 0xf8, 0xfd, 0x69,
+-      0x39, 0xdb, 0x1c, 0x21, 0xff, 0xe2, 0x3d, 0x96, 0x77, 0x10, 0xbf, 0x96,
+-      0x88, 0xf1, 0x5e, 0x97, 0xf2, 0x27, 0xc4, 0x0c, 0xd1, 0x42, 0x0b, 0xc7,
+-      0x2d, 0xf7, 0xe7, 0xd6, 0xd1, 0x43, 0x54, 0x53, 0x8c, 0x16, 0x50, 0x2e,
+-      0x55, 0x11, 0x72, 0x2c, 0x7d, 0x1f, 0x8e, 0x92, 0xcd, 0xd9, 0x45, 0x2e,
+-      0x12, 0xd7, 0xed, 0xba, 0x50, 0xf4, 0xee, 0x92, 0xb2, 0x33, 0x0d, 0x9a,
+-      0xc2, 0x92, 0xc6, 0x4b, 0xb4, 0xba, 0x85, 0x7c, 0xbf, 0xd1, 0x89, 0x88,
+-      0xe2, 0x2e, 0xe8, 0x07, 0x6c, 0x8d, 0xf2, 0xae, 0x94, 0xdb, 0xd2, 0x06,
+-      0xa6, 0x6d, 0xea, 0xc7, 0x5b, 0xc3, 0x68, 0xb6, 0xa0, 0xeb, 0x8e, 0x35,
+-      0xf0, 0x14, 0xee, 0x26, 0x3e, 0x11, 0x99, 0x4f, 0x35, 0x90, 0xd6, 0xc4,
+-      0x5e, 0xbb, 0x0e, 0xee, 0x4d, 0x02, 0x11, 0x27, 0x4e, 0xbc, 0xd5, 0x20,
+-      0xe7, 0x3f, 0xb3, 0x8c, 0x70, 0xdf, 0xb7, 0x7f, 0x44, 0xf2, 0x8a, 0xf9,
+-      0xf5, 0x0e, 0xaf, 0x59, 0x76, 0x11, 0xeb, 0xa9, 0xe7, 0xa7, 0x25, 0x7a,
+-      0xbf, 0x85, 0xde, 0x3f, 0x44, 0xb8, 0x73, 0x31, 0x7f, 0xd6, 0x6b, 0x6a,
+-      0x77, 0xac, 0xf2, 0x73, 0x78, 0x90, 0x64, 0xe0, 0xfc, 0xcd, 0x6b, 0xcc,
+-      0xf3, 0x22, 0xe6, 0x99, 0x6a, 0x37, 0xfb, 0x95, 0x8d, 0x8f, 0xf2, 0x77,
+-      0x73, 0x0f, 0xef, 0xee, 0xb0, 0x21, 0x26, 0xec, 0x3d, 0x28, 0xeb, 0x68,
+-      0x8a, 0x3a, 0x56, 0xff, 0x34, 0xa0, 0x44, 0x9c, 0x51, 0x14, 0x9b, 0x81,
+-      0x87, 0x0a, 0x96, 0xb7, 0x51, 0x31, 0x07, 0xe2, 0xd4, 0xf7, 0x9e, 0xfc,
+-      0xa1, 0x8a, 0x9d, 0x9d, 0x65, 0x33, 0x46, 0x46, 0x8f, 0x3a, 0x51, 0xf1,
+-      0xe2, 0x2e, 0x05, 0x0b, 0x96, 0xa8, 0x78, 0x8b, 0x72, 0xc8, 0x36, 0x9a,
+-      0x45, 0xc2, 0x96, 0xda, 0x54, 0xe9, 0x89, 0x7f, 0x5f, 0x3c, 0x9a, 0xa4,
+-      0xb1, 0x6a, 0x4c, 0x5a, 0x7d, 0x07, 0xf0, 0xa8, 0x74, 0x9b, 0xd9, 0x16,
+-      0x11, 0xca, 0xc3, 0xe7, 0xf2, 0x50, 0x6a, 0x8a, 0xf0, 0x0f, 0x76, 0xbf,
+-      0xeb, 0xfb, 0x0c, 0xd9, 0xd2, 0x7d, 0x23, 0x0f, 0xd1, 0x94, 0x71, 0x30,
+-      0xdb, 0xcc, 0x76, 0xe1, 0xf9, 0x99, 0x94, 0x37, 0x4c, 0xc3, 0x47, 0x8b,
+-      0x8a, 0xc5, 0x19, 0x34, 0x29, 0x8e, 0x75, 0x6a, 0x2f, 0xf1, 0xdc, 0xee,
+-      0x34, 0xe1, 0x74, 0x0b, 0xe7, 0xc4, 0xa8, 0xf8, 0xd9, 0xa8, 0xd9, 0x43,
+-      0x3d, 0xee, 0xaa, 0x8d, 0x30, 0xfb, 0xee, 0x11, 0xd4, 0x97, 0x11, 0xef,
+-      0x56, 0x92, 0xf8, 0xb4, 0x55, 0xc4, 0x93, 0x65, 0x33, 0x8e, 0x2a, 0xbf,
+-      0x67, 0x65, 0xcc, 0xb2, 0xbc, 0x98, 0xf2, 0x1b, 0x99, 0xce, 0xb0, 0x8f,
+-      0xdf, 0x85, 0xda, 0x98, 0x40, 0x4d, 0x66, 0xc4, 0xd7, 0x6d, 0x94, 0xec,
+-      0xdd, 0x94, 0x51, 0x89, 0xb6, 0x4a, 0x39, 0x9d, 0x68, 0x2f, 0x1e, 0xa0,
+-      0x9e, 0x85, 0x75, 0xfa, 0x92, 0xcc, 0x7d, 0x9b, 0xe5, 0xbc, 0x65, 0x4e,
+-      0x66, 0xd2, 0x6c, 0x3d, 0xff, 0x96, 0x0d, 0xac, 0xfb, 0x43, 0x94, 0xcf,
+-      0x17, 0x2f, 0xed, 0xda, 0x31, 0xa0, 0x3c, 0x20, 0x8d, 0x15, 0x6c, 0xdb,
+-      0x46, 0x7a, 0xef, 0xdb, 0x9d, 0xfa, 0xa9, 0x77, 0xf0, 0xda, 0x50, 0x54,
+-      0x34, 0xed, 0xf6, 0xfc, 0xda, 0xf9, 0x2a, 0xf1, 0xf5, 0x61, 0x9a, 0xf9,
+-      0xe1, 0x78, 0x7b, 0x07, 0x97, 0x16, 0xff, 0x94, 0xf6, 0x86, 0x88, 0x17,
+-      0x68, 0x31, 0x92, 0x75, 0x05, 0xcd, 0x25, 0x57, 0x67, 0x0e, 0x48, 0x57,
+-      0x67, 0xfc, 0xa4, 0xf7, 0x51, 0xd6, 0x3b, 0xcf, 0x45, 0x55, 0xdd, 0xf3,
+-      0x7e, 0x3e, 0x3f, 0x4c, 0x31, 0xc9, 0xb6, 0x44, 0x53, 0x83, 0xc3, 0xfa,
+-      0x85, 0xa8, 0x73, 0xba, 0x8c, 0x85, 0x62, 0x87, 0xf4, 0xe2, 0xd5, 0x7c,
+-      0x16, 0x15, 0x13, 0xfe, 0x79, 0xa6, 0xfd, 0xe5, 0xf3, 0x6d, 0xe2, 0xd8,
+-      0xc3, 0x54, 0x7c, 0xeb, 0x7d, 0x7f, 0xe9, 0x7d, 0x92, 0xe2, 0x49, 0x73,
+-      0x6e, 0x95, 0xa9, 0x56, 0xf6, 0x37, 0x28, 0x2f, 0xdb, 0xb7, 0xc8, 0x5c,
+-      0x2b, 0xfb, 0x1d, 0xbc, 0x38, 0xe1, 0xd9, 0xb9, 0xfb, 0x3c, 0x1f, 0xd7,
+-      0x74, 0x4a, 0x39, 0x61, 0x5f, 0x45, 0xba, 0x60, 0x3c, 0x55, 0x5d, 0xfc,
+-      0xe5, 0x9c, 0x6e, 0xa8, 0x89, 0xae, 0xaf, 0xd4, 0x2b, 0xce, 0x69, 0x35,
+-      0xce, 0x1b, 0x78, 0x31, 0xaf, 0xb4, 0x85, 0xd1, 0x84, 0x3e, 0x5b, 0xe0,
+-      0xdd, 0x1e, 0x81, 0xd3, 0x97, 0x47, 0x10, 0xba, 0xcc, 0x2a, 0x77, 0x84,
+-      0xfa, 0x25, 0xe6, 0x95, 0xc9, 0x51, 0xce, 0x48, 0xad, 0x53, 0x45, 0xed,
+-      0xa5, 0x5c, 0xa7, 0xd8, 0x0e, 0x0a, 0xfe, 0x85, 0xf6, 0x5d, 0x77, 0xa9,
+-      0x65, 0x74, 0x50, 0x4b, 0xe0, 0xf5, 0x5d, 0x9d, 0x09, 0x9f, 0xf3, 0x43,
+-      0xe6, 0xe1, 0x4a, 0x5f, 0x06, 0xf6, 0xc7, 0xc5, 0x64, 0xc7, 0xdc, 0x0a,
+-      0x05, 0xe9, 0x25, 0xf0, 0x22, 0xf4, 0x7e, 0xdb, 0x2e, 0xf6, 0x85, 0x47,
+-      0x74, 0x9e, 0x09, 0x81, 0xae, 0x84, 0x0e, 0x6b, 0xd5, 0x0b, 0x44, 0x9b,
+-      0xfa, 0x4d, 0xd2, 0x07, 0xd3, 0xaa, 0xe2, 0xa9, 0xe2, 0x88, 0x8a, 0xd3,
+-      0x0f, 0xf3, 0x19, 0x08, 0xd6, 0x51, 0x7a, 0x01, 0xc5, 0x76, 0x46, 0x9d,
+-      0x93, 0x6d, 0x40, 0xaf, 0xf4, 0x61, 0x51, 0x31, 0x35, 0xca, 0xf8, 0x7c,
+-      0x3f, 0x42, 0x91, 0x7d, 0x2b, 0xcd, 0x7b, 0x7e, 0x23, 0x17, 0x64, 0xfe,
+-      0x9d, 0xf6, 0x30, 0xde, 0xa8, 0x38, 0xe2, 0xd3, 0xae, 0xe8, 0x68, 0x8a,
+-      0x74, 0x3d, 0x91, 0xae, 0xe2, 0xd9, 0x48, 0x7b, 0xd8, 0xe7, 0x98, 0x87,
+-      0x5e, 0xf1, 0x78, 0x9e, 0xf2, 0x0a, 0xd5, 0xdc, 0x89, 0xac, 0x62, 0xd5,
+-      0x42, 0x62, 0xb3, 0xad, 0x63, 0x99, 0x5e, 0xa9, 0x57, 0xf7, 0xe7, 0xab,
+-      0xf7, 0x3f, 0xbd, 0xa2, 0x90, 0x57, 0xa8, 0x7f, 0x83, 0x5e, 0xef, 0x28,
+-      0xf7, 0x34, 0x51, 0x2c, 0xbd, 0x46, 0xb5, 0xeb, 0xd5, 0xb1, 0x5e, 0x91,
+-      0xcf, 0xeb, 0x78, 0x65, 0x7c, 0xb9, 0x78, 0x30, 0x6f, 0xe1, 0xe5, 0x62,
+-      0xe5, 0x2e, 0xe8, 0x81, 0xa2, 0x2b, 0xc6, 0xf3, 0xdc, 0xfb, 0x98, 0xa9,
+-      0x32, 0x66, 0xc4, 0x5a, 0xc2, 0x53, 0x56, 0x2f, 0xf4, 0xeb, 0xc8, 0x78,
+-      0xb1, 0x01, 0x93, 0x63, 0x95, 0x7a, 0x77, 0xeb, 0xb9, 0x7a, 0xf7, 0xc5,
+-      0x3b, 0x9d, 0x48, 0x4e, 0x77, 0xd0, 0xd7, 0x38, 0xbc, 0x49, 0x46, 0xad,
+-      0x10, 0xd5, 0x49, 0x2b, 0x37, 0x2d, 0x22, 0x3d, 0x3b, 0xba, 0x99, 0x5f,
+-      0xf4, 0x69, 0xd4, 0x63, 0x4c, 0x14, 0xd9, 0x5f, 0x0d, 0x18, 0xc5, 0x6f,
+-      0xb5, 0x56, 0xec, 0xdc, 0x96, 0xd3, 0x1c, 0xa0, 0x9e, 0xfa, 0x8b, 0x06,
+-      0x9a, 0x0d, 0xea, 0x9c, 0x1b, 0xbd, 0x8e, 0x6e, 0xe4, 0x54, 0xc7, 0xea,
+-      0xb9, 0x5e, 0xac, 0x5c, 0xa9, 0x38, 0xf7, 0xad, 0x0c, 0x4d, 0x1b, 0xc6,
+-      0x16, 0xbf, 0x0e, 0x9d, 0x1c, 0xd8, 0x4f, 0x33, 0x50, 0x0d, 0xcd, 0xa5,
+-      0xef, 0xe9, 0xb8, 0x2f, 0xd4, 0x7d, 0x1f, 0x36, 0xe5, 0x07, 0xf0, 0xb7,
+-      0x79, 0xce, 0x13, 0x3a, 0x1e, 0x63, 0x1e, 0x0a, 0x7c, 0xff, 0x73, 0xb0,
+-      0x85, 0x6b, 0xdf, 0x23, 0x25, 0x8a, 0xc3, 0x21, 0xe4, 0x12, 0x8e, 0x9f,
+-      0x47, 0x12, 0xa7, 0xc4, 0xf9, 0xfd, 0xbf, 0xbb, 0x97, 0xf5, 0x46, 0xfd,
+-      0x1c, 0xcd, 0x4e, 0x4a, 0xf6, 0x4a, 0xbe, 0x7f, 0xf2, 0x03, 0x74, 0x3b,
+-      0xe5, 0x91, 0x0f, 0x6c, 0x13, 0x63, 0x7a, 0xc5, 0x7e, 0xdb, 0x47, 0xb9,
+-      0x1e, 0x7d, 0x42, 0xf5, 0x28, 0x2a, 0xb6, 0xd2, 0x73, 0xa3, 0xf3, 0x4a,
+-      0x7a, 0x8a, 0x78, 0x3f, 0x46, 0x39, 0x26, 0xe1, 0x1c, 0x47, 0xa2, 0xc0,
+-      0xb3, 0xfa, 0x51, 0x9a, 0xd5, 0xcd, 0xdc, 0x32, 0x8a, 0xe7, 0x03, 0x76,
+-      0xd7, 0xc0, 0xa0, 0x30, 0x8f, 0x52, 0x6d, 0x4e, 0x1c, 0xa0, 0xb9, 0x8b,
+-      0xbe, 0x37, 0xb4, 0x87, 0xba, 0xec, 0x75, 0x30, 0xdd, 0x85, 0xc2, 0x34,
+-      0x5e, 0x17, 0xa6, 0x5e, 0x23, 0x58, 0x27, 0x9f, 0x60, 0x91, 0xaf, 0x9b,
+-      0xe3, 0xb0, 0xfc, 0xef, 0x57, 0xd2, 0x1d, 0xfe, 0xf7, 0xd1, 0xf4, 0xc5,
+-      0xe7, 0x7b, 0x0b, 0x77, 0x07, 0xd5, 0xc6, 0x7c, 0x21, 0x83, 0x48, 0x33,
+-      0xd7, 0x8a, 0xa8, 0x38, 0xb0, 0x0b, 0x5a, 0xbd, 0xf3, 0x3e, 0xbe, 0x3e,
+-      0x04, 0x4d, 0x73, 0xa8, 0xd2, 0x12, 0x2f, 0xd4, 0x1b, 0xa4, 0xae, 0x13,
+-      0xdc, 0x0f, 0x74, 0xe5, 0x9e, 0x80, 0xd9, 0x53, 0x43, 0x34, 0x3e, 0x01,
+-      0xe3, 0x7a, 0x1f, 0x49, 0x1f, 0xe7, 0x2c, 0xce, 0xe3, 0x8c, 0x8a, 0xc1,
+-      0xd1, 0xa8, 0xd8, 0x4c, 0xb2, 0xb4, 0x3b, 0x27, 0x71, 0x85, 0xcf, 0xff,
+-      0x2b, 0xc4, 0x3f, 0xe7, 0x9c, 0x13, 0x94, 0x73, 0x18, 0xef, 0xd1, 0x34,
+-      0xe3, 0x1d, 0xa0, 0x3e, 0xf3, 0x7a, 0xdb, 0x4c, 0xf5, 0x84, 0xcc, 0x44,
+-      0x97, 0x30, 0x29, 0xa9, 0xb1, 0x3c, 0x5d, 0xfd, 0x33, 0xe0, 0xb9, 0xd8,
+-      0x97, 0xa9, 0xa7, 0x9e, 0x64, 0x1a, 0x22, 0x7a, 0x1f, 0xfa, 0xf4, 0x4e,
+-      0xce, 0xd1, 0x3b, 0xf1, 0x07, 0x64, 0x52, 0xdd, 0xfb, 0xc9, 0x1e, 0xdb,
+-      0x0a, 0xaf, 0xc8, 0xce, 0xd6, 0x8a, 0x4c, 0x83, 0x3e, 0x2f, 0x3f, 0x49,
+-      0x33, 0x2f, 0x51, 0x67, 0x86, 0xe6, 0x48, 0xa6, 0x6d, 0xae, 0x22, 0xba,
+-      0x44, 0xb3, 0xcb, 0x18, 0x10, 0x66, 0x3f, 0xe9, 0xad, 0x6f, 0xdc, 0xd7,
+-      0xdb, 0x4f, 0xd2, 0x5d, 0x3e, 0xce, 0x19, 0xea, 0x39, 0xbe, 0xe8, 0x93,
+-      0xec, 0x73, 0xd5, 0xbb, 0xca, 0x94, 0x78, 0x8a, 0x7a, 0x97, 0xa7, 0x8a,
+-      0xaa, 0xd8, 0x47, 0xf6, 0x1c, 0xa7, 0xb8, 0x19, 0xf4, 0xef, 0x1f, 0xa9,
+-      0x06, 0x96, 0xbe, 0xd7, 0x3c, 0x97, 0x6f, 0xc8, 0xae, 0x65, 0xb2, 0x6b,
+-      0x27, 0x65, 0x65, 0xee, 0xd9, 0xb8, 0xde, 0x1d, 0xa6, 0x7a, 0x27, 0xf0,
+-      0xa1, 0x9f, 0x63, 0x0f, 0xa3, 0xb3, 0xc8, 0x3d, 0xa1, 0x25, 0x96, 0xe7,
+-      0x8d, 0xdc, 0x7c, 0xc2, 0xfd, 0x7e, 0xa9, 0x92, 0x1f, 0xa9, 0x36, 0xba,
+-      0x21, 0xa7, 0x47, 0xbc, 0x50, 0xe4, 0x9f, 0x54, 0x4c, 0x62, 0xec, 0x5b,
+-      0xae, 0x68, 0xea, 0xf4, 0xd0, 0xde, 0xe9, 0x49, 0xd5, 0xb2, 0xca, 0xef,
+-      0x0b, 0xeb, 0x94, 0x15, 0x72, 0x6f, 0x9f, 0x8f, 0x4d, 0xb8, 0x6c, 0xb1,
+-      0x7b, 0x73, 0x02, 0xfe, 0x4c, 0x6c, 0x50, 0x4c, 0xa2, 0xb7, 0x3b, 0xd9,
+-      0x33, 0x2d, 0x92, 0xd4, 0x43, 0x25, 0xbd, 0x94, 0x48, 0xa6, 0x8e, 0xc3,
+-      0xd6, 0x8e, 0x14, 0x6d, 0xed, 0x8d, 0x62, 0xf5, 0x6e, 0x93, 0xe5, 0x62,
+-      0x5f, 0xe5, 0xf8, 0xb0, 0xdc, 0xfb, 0x29, 0x0f, 0xc1, 0xef, 0x43, 0xe4,
+-      0xa1, 0x46, 0x8a, 0xb1, 0x3b, 0x51, 0x4b, 0x4d, 0xb3, 0xdc, 0xde, 0x44,
+-      0xf3, 0xcf, 0x5d, 0x44, 0xbf, 0xdc, 0x9a, 0x03, 0xd7, 0x93, 0x47, 0xf8,
+-      0xc2, 0xb9, 0x85, 0x79, 0x7a, 0x33, 0x52, 0x91, 0x91, 0xca, 0x70, 0xe5,
+-      0xff, 0x17, 0xd2, 0x1a, 0x28, 0x06, 0xd7, 0x0d, 0x09, 0xea, 0xef, 0x2b,
+-      0xf1, 0xb8, 0x90, 0xef, 0x4e, 0xfd, 0x7b, 0xb3, 0x57, 0x64, 0xa5, 0xde,
+-      0x7f, 0xdc, 0xcc, 0x77, 0x51, 0x8a, 0x33, 0x1c, 0xfb, 0xed, 0xb3, 0x15,
+-      0xdd, 0xf2, 0x1c, 0x7f, 0xa8, 0xe4, 0x8a, 0x6b, 0xf3, 0xd8, 0x40, 0xbd,
+-      0x83, 0x1b, 0x26, 0x1c, 0xd7, 0x16, 0x7b, 0x49, 0x37, 0x96, 0x31, 0x48,
+-      0x44, 0xb7, 0xea, 0x5d, 0xfa, 0x38, 0xf5, 0x5a, 0x84, 0xcb, 0xa0, 0x7e,
+-      0x94, 0x62, 0x7c, 0x1e, 0x76, 0xcc, 0xc5, 0x54, 0xbd, 0xc3, 0x77, 0xbb,
+-      0x03, 0x62, 0xe1, 0x54, 0x25, 0xcd, 0x1f, 0x3a, 0x27, 0xdf, 0x69, 0xb9,
+-      0xfd, 0x26, 0x7e, 0x5f, 0x3f, 0x67, 0x93, 0x2b, 0x99, 0x26, 0xfd, 0x7e,
+-      0x76, 0x8e, 0x87, 0x3f, 0x74, 0xf6, 0x8e, 0xaf, 0xfe, 0xf6, 0x99, 0x59,
+-      0xe2, 0x93, 0x7b, 0x45, 0x78, 0x31, 0x87, 0xfb, 0xc4, 0x0b, 0xe7, 0x7c,
+-      0xe1, 0x52, 0xc2, 0xbd, 0x01, 0x37, 0xd2, 0x7c, 0xd4, 0x49, 0x73, 0x28,
+-      0xcd, 0x2e, 0x48, 0x0d, 0xb3, 0x3e, 0xce, 0x90, 0x3e, 0xd8, 0xe6, 0xa7,
+-      0xc8, 0xe6, 0x1d, 0x39, 0x8a, 0x99, 0xd4, 0x7a, 0x61, 0xf6, 0x92, 0xbf,
+-      0x51, 0xed, 0x32, 0x13, 0x1f, 0xc3, 0x34, 0xd6, 0xfa, 0x3e, 0x7d, 0x66,
+-      0xce, 0xa7, 0x4f, 0xb1, 0x4f, 0xa3, 0x6f, 0x38, 0x04, 0x25, 0xf3, 0x29,
+-      0xe9, 0x8c, 0xe2, 0x4d, 0x30, 0x4e, 0xce, 0x53, 0x67, 0x40, 0xfd, 0xb2,
+-      0x36, 0x9f, 0xf6, 0xc8, 0x42, 0x47, 0xe2, 0x28, 0xf5, 0xdb, 0xfb, 0xc0,
+-      0x25, 0xa3, 0xeb, 0xe8, 0x31, 0x61, 0x96, 0xdf, 0x0b, 0x71, 0x0e, 0x10,
+-      0x68, 0xcc, 0x54, 0xf0, 0x5d, 0x5e, 0x4c, 0x60, 0x47, 0xa9, 0x82, 0xf3,
+-      0x32, 0xf2, 0xe1, 0x31, 0xff, 0x7e, 0x41, 0x81, 0x96, 0x79, 0x9b, 0x6b,
+-      0x33, 0xc1, 0x25, 0x73, 0xf2, 0x7f, 0x67, 0xce, 0x06, 0x6f, 0xce, 0xe9,
+-      0x67, 0x4b, 0x8c, 0x6b, 0x8f, 0x96, 0xe1, 0x7c, 0x0d, 0xb1, 0x26, 0xff,
+-      0x67, 0x54, 0x03, 0x34, 0xea, 0x81, 0xfd, 0xbc, 0x8f, 0x5c, 0x11, 0x94,
+-      0xbf, 0xcb, 0xb5, 0x47, 0xec, 0xf0, 0x5c, 0xfe, 0xfa, 0x06, 0xad, 0xf5,
+-      0xd1, 0x87, 0x75, 0xc6, 0x77, 0x12, 0x37, 0xd1, 0xb3, 0xeb, 0xef, 0xeb,
+-      0xcf, 0xa3, 0xa7, 0x36, 0x4d, 0xfd, 0xad, 0xbf, 0xcf, 0xbf, 0xaf, 0xa0,
+-      0x3d, 0xcb, 0xf9, 0xdd, 0x08, 0xdf, 0xb5, 0xac, 0xce, 0x26, 0x8d, 0xcd,
+-      0x60, 0x3a, 0x06, 0xd6, 0x14, 0x0d, 0xdc, 0x4a, 0x75, 0x61, 0xcc, 0xbf,
+-      0x07, 0x3d, 0x3f, 0xf7, 0x28, 0xb4, 0x6f, 0x19, 0xed, 0x1b, 0xf4, 0xd7,
+-      0x0c, 0x2c, 0x2f, 0x9e, 0x9f, 0xe9, 0x54, 0x3a, 0x77, 0xe8, 0xdc, 0x1c,
+-      0xcb, 0x76, 0x70, 0xc5, 0xce, 0x7c, 0xaf, 0x18, 0xc9, 0x47, 0x89, 0x96,
+-      0x42, 0x19, 0x40, 0xa2, 0x23, 0x73, 0x33, 0xe5, 0x5d, 0x2b, 0xa5, 0x2a,
+-      0x4d, 0x58, 0x9b, 0x22, 0x3f, 0xd6, 0x97, 0xe2, 0x8e, 0x54, 0x0d, 0xf5,
+-      0x34, 0xc3, 0xb8, 0x4d, 0xaf, 0x45, 0x7f, 0xea, 0x52, 0xe0, 0xc6, 0x3a,
+-      0xea, 0x41, 0x06, 0xfc, 0x9e, 0xbe, 0x86, 0xe8, 0xd5, 0x59, 0x4f, 0xe1,
+-      0xf6, 0x73, 0xff, 0xae, 0x42, 0x34, 0x7e, 0xef, 0x3c, 0x77, 0x33, 0xdc,
+-      0xe6, 0x1e, 0xaa, 0x83, 0xdd, 0x58, 0x97, 0x0a, 0x53, 0x6f, 0xcd, 0xf9,
+-      0x61, 0x3e, 0x22, 0xd6, 0x67, 0x72, 0xfd, 0xb9, 0x3e, 0x67, 0x46, 0xcc,
+-      0x90, 0x5c, 0xa8, 0xf5, 0xc4, 0x73, 0x34, 0xbf, 0x65, 0x4a, 0x7c, 0x1f,
+-      0xa5, 0x20, 0x66, 0xf1, 0xcc, 0x48, 0xc3, 0x1f, 0xcd, 0x59, 0xe9, 0xc7,
+-      0xeb, 0x71, 0xd5, 0xbe, 0x06, 0x64, 0xf6, 0xe9, 0xb0, 0x1f, 0xb7, 0x68,
+-      0x2d, 0x45, 0x9f, 0x19, 0xb1, 0xb7, 0xf8, 0x87, 0x68, 0x77, 0x60, 0x8d,
+-      0xfe, 0x3f, 0x95, 0x7d, 0x0b, 0x70, 0x54, 0xe7, 0x95, 0xe6, 0x77, 0xfb,
+-      0x21, 0xb5, 0x9e, 0x5c, 0x09, 0x09, 0x5a, 0x20, 0x9b, 0x6e, 0xf7, 0x6d,
+-      0xa9, 0x8d, 0x3a, 0xe1, 0x36, 0x88, 0xb5, 0x9c, 0xed, 0x2d, 0x1a, 0x2c,
+-      0x8c, 0x08, 0x60, 0xcb, 0xb6, 0x3c, 0x83, 0x77, 0x32, 0x6b, 0xc5, 0x36,
+-      0x18, 0x3f, 0x92, 0x91, 0x09, 0x5b, 0x25, 0x53, 0x53, 0xd1, 0x1d, 0x01,
+-      0x42, 0x40, 0xbf, 0x24, 0xc1, 0x00, 0x33, 0x53, 0xe3, 0x46, 0x0f, 0x20,
+-      0xb8, 0x5b, 0xc2, 0x71, 0x66, 0x4a, 0xc9, 0xd4, 0x56, 0x34, 0x20, 0x0c,
+-      0x04, 0x63, 0x3c, 0x93, 0x99, 0x29, 0xb2, 0xeb, 0x2d, 0x13, 0x1c, 0xc0,
+-      0x0f, 0xfc, 0x4c, 0xb2, 0x16, 0xf1, 0xc4, 0x77, 0xbf, 0x73, 0xbb, 0x1b,
+-      0x04, 0x45, 0x3c, 0x35, 0x54, 0x75, 0xb5, 0x6e, 0xdf, 0xff, 0xfe, 0x8f,
+-      0xf3, 0x9f, 0xf3, 0x9d, 0xef, 0x9c, 0xf3, 0xdf, 0xa2, 0x84, 0xfe, 0xfb,
+-      0xdf, 0xcc, 0x75, 0x8c, 0x4f, 0xdc, 0x0b, 0x69, 0x66, 0xb3, 0x65, 0xbc,
+-      0x0b, 0x5f, 0x0e, 0x24, 0x9c, 0xe8, 0xea, 0x77, 0xe0, 0xda, 0xa2, 0x73,
+-      0xa6, 0x67, 0xf6, 0x8d, 0xfc, 0x4e, 0xc4, 0xe6, 0xc4, 0x33, 0xfd, 0xf2,
+-      0xed, 0x40, 0x60, 0x71, 0x36, 0xe7, 0xba, 0x61, 0xd0, 0x89, 0xa7, 0xd9,
+-      0xf6, 0xa2, 0x6e, 0xcb, 0xed, 0xb1, 0x55, 0x1b, 0xc0, 0x73, 0xfd, 0x8c,
+-      0x6d, 0x34, 0x13, 0xcf, 0x86, 0x8a, 0x71, 0x7f, 0x75, 0x76, 0x1d, 0xc3,
+-      0x5c, 0x87, 0xe1, 0x30, 0x94, 0x4c, 0xa3, 0x13, 0xe5, 0x9c, 0x3f, 0xb9,
+-      0x18, 0x7e, 0x98, 0x29, 0xc1, 0xe8, 0x81, 0x71, 0x25, 0x9d, 0xce, 0xb6,
+-      0x19, 0xb2, 0x62, 0x5a, 0x43, 0x19, 0x6b, 0xb4, 0x61, 0x26, 0xfd, 0xfb,
+-      0x85, 0x8c, 0x03, 0x9f, 0x65, 0x5c, 0xf8, 0x74, 0xa4, 0x18, 0xbf, 0x3e,
+-      0x50, 0xc2, 0x8f, 0x8a, 0x4f, 0x46, 0x34, 0xfe, 0xde, 0xac, 0xbc, 0x12,
+-      0x95, 0xd8, 0x23, 0x80, 0x4f, 0x33, 0xe3, 0xca, 0xd1, 0xaf, 0x5c, 0x6b,
+-      0xc6, 0xfc, 0x8e, 0x6a, 0x70, 0xcc, 0xbf, 0x36, 0xbf, 0x3b, 0x4d, 0xae,
+-      0xd3, 0xc7, 0xaa, 0xd4, 0x4a, 0xf0, 0xd9, 0x01, 0x19, 0x47, 0xfa, 0x6f,
+-      0x56, 0x5e, 0x8d, 0x8a, 0x7c, 0x2b, 0xf1, 0xeb, 0x11, 0x91, 0xe3, 0x27,
+-      0xd4, 0x69, 0xe9, 0x7f, 0x5c, 0x39, 0x9e, 0x7b, 0xe6, 0xe7, 0xdc, 0x8b,
+-      0x8d, 0xa3, 0x0e, 0x90, 0x4c, 0xf0, 0x59, 0x17, 0x5e, 0x38, 0x68, 0x23,
+-      0x27, 0x2e, 0xc6, 0xc6, 0xc1, 0x12, 0xbc, 0x30, 0xa8, 0xa2, 0xe3, 0x60,
+-      0xb3, 0x42, 0xbe, 0xaf, 0xce, 0x20, 0xef, 0xed, 0x18, 0x0d, 0xb0, 0xdd,
+-      0xb8, 0x72, 0x2e, 0xdd, 0x30, 0x33, 0xdb, 0x4f, 0x36, 0xf7, 0x93, 0xe5,
+-      0x31, 0x86, 0xc2, 0x38, 0x8d, 0x5c, 0x72, 0xdf, 0xe6, 0xd7, 0x18, 0x21,
+-      0x3e, 0x9c, 0xb6, 0x53, 0xc7, 0x24, 0x1e, 0x15, 0xbb, 0x4f, 0x6d, 0xbe,
+-      0x12, 0x95, 0xb9, 0x1a, 0xca, 0x91, 0x46, 0x9b, 0xc5, 0xb1, 0x5f, 0x67,
+-      0x5c, 0xb8, 0x82, 0xb6, 0xf2, 0x10, 0xe5, 0xb1, 0x9a, 0xf2, 0x68, 0xa6,
+-      0x3c, 0x5a, 0x39, 0xdf, 0x97, 0xa3, 0x82, 0x93, 0xde, 0x40, 0x44, 0xd1,
+-      0xb0, 0x2a, 0x23, 0x7d, 0x58, 0xe3, 0xb8, 0x1c, 0xe1, 0xbf, 0xd9, 0xbc,
+-      0x35, 0x7a, 0xab, 0x5c, 0xa0, 0x96, 0x87, 0xc5, 0xaf, 0x89, 0x6c, 0x02,
+-      0xe4, 0x50, 0xe3, 0xca, 0xa8, 0x15, 0x23, 0xef, 0xdb, 0xec, 0x49, 0xe5,
+-      0x6d, 0xa7, 0x44, 0xec, 0x53, 0xf2, 0xe1, 0xca, 0x3e, 0x72, 0xb5, 0x1a,
+-      0x2d, 0x7b, 0xff, 0xde, 0x94, 0x7c, 0xa7, 0x36, 0x2f, 0xb4, 0xf0, 0xe6,
+-      0x6f, 0x36, 0x37, 0x5d, 0x5f, 0xd3, 0xb8, 0xf2, 0x36, 0xd7, 0x73, 0x81,
+-      0x7a, 0x7a, 0x92, 0x73, 0x2d, 0x92, 0xbd, 0x4b, 0x73, 0xef, 0x38, 0xd7,
+-      0x4f, 0x87, 0x8b, 0xf1, 0x5e, 0xaa, 0x84, 0x1f, 0xca, 0x76, 0x98, 0x7b,
+-      0x97, 0x6e, 0x56, 0x4e, 0x59, 0xf2, 0x0d, 0xe0, 0x5d, 0x8e, 0x7d, 0xec,
+-      0x7a, 0x1f, 0x59, 0xde, 0x96, 0xad, 0xc3, 0xe5, 0xed, 0x57, 0xf0, 0x54,
+-      0xd6, 0x66, 0x28, 0x91, 0xeb, 0xb5, 0x34, 0xc9, 0x8b, 0x49, 0x7d, 0x91,
+-      0x3e, 0x46, 0x95, 0xfc, 0xa8, 0x42, 0x8c, 0xa1, 0xfe, 0xa9, 0xcb, 0x3c,
+-      0x0e, 0xe2, 0xe2, 0x3a, 0x7c, 0xc1, 0x38, 0x21, 0x42, 0x8b, 0x92, 0xb5,
+-      0x48, 0x8e, 0xb4, 0x50, 0x62, 0x42, 0xeb, 0xdf, 0x20, 0xb9, 0xd4, 0x6b,
+-      0xe4, 0xb9, 0x54, 0x21, 0x74, 0xa7, 0xbf, 0x30, 0x27, 0xaa, 0xe8, 0x57,
+-      0xb5, 0xeb, 0x79, 0x37, 0xae, 0xd9, 0x34, 0x87, 0x78, 0xaf, 0x27, 0x8d,
+-      0xdc, 0x3f, 0x72, 0x2f, 0xf2, 0xdd, 0x27, 0xb5, 0xdf, 0x99, 0x4f, 0xdc,
+-      0xd4, 0x36, 0x8f, 0xe5, 0xf9, 0x78, 0x5f, 0xb0, 0xbc, 0x14, 0x3d, 0xbb,
+-      0xbd, 0xc9, 0x14, 0xaa, 0x90, 0xd4, 0x6c, 0x73, 0x0b, 0x38, 0x3b, 0x3b,
+-      0xbc, 0xbd, 0xcd, 0xb0, 0xf2, 0x20, 0x9e, 0x14, 0xfe, 0x61, 0xa6, 0xd8,
+-      0x8c, 0x53, 0x6b, 0xf0, 0x54, 0xd8, 0x2a, 0x65, 0xee, 0xd6, 0xac, 0xec,
+-      0xfd, 0x45, 0x58, 0x17, 0x2c, 0x42, 0xaa, 0x95, 0x18, 0xd7, 0x6f, 0xb4,
+-      0xb0, 0x7b, 0xf2, 0xa7, 0xc0, 0x8b, 0xdf, 0xf4, 0x0b, 0x1f, 0x03, 0x0a,
+-      0x63, 0x1c, 0x13, 0x39, 0x0c, 0xec, 0xf7, 0x1a, 0x36, 0x9b, 0x3c, 0xff,
+-      0x99, 0x69, 0xb4, 0xc9, 0xb3, 0xd2, 0x47, 0xad, 0xc5, 0x1b, 0x6f, 0xd6,
+-      0x7b, 0x0f, 0xe5, 0xf4, 0xaf, 0x33, 0x25, 0xe7, 0xa8, 0xd6, 0x31, 0xee,
+-      0xe9, 0x97, 0x9a, 0x4d, 0x04, 0xbb, 0xaa, 0x7d, 0x1d, 0xba, 0xad, 0x18,
+-      0x67, 0xbf, 0xf6, 0xdf, 0x88, 0xe9, 0x05, 0x70, 0xd5, 0x01, 0xf7, 0xc5,
+-      0x6d, 0xb0, 0xd5, 0x11, 0xab, 0xa9, 0xd3, 0xcd, 0xa3, 0x36, 0xcc, 0xeb,
+-      0x57, 0xf0, 0x58, 0xd2, 0x86, 0x07, 0x92, 0x76, 0xac, 0x4a, 0xe2, 0xfb,
+-      0xf3, 0x80, 0xc9, 0x1a, 0xf8, 0xdb, 0xa7, 0xe8, 0x9a, 0xcb, 0xe1, 0x6f,
+-      0x8d, 0x91, 0x17, 0xac, 0x62, 0x2c, 0xba, 0x72, 0x94, 0x38, 0xc8, 0xb6,
+-      0xce, 0x3e, 0xea, 0x66, 0x9f, 0x1d, 0x35, 0x7d, 0xb8, 0xb3, 0x10, 0xa0,
+-      0x75, 0xfb, 0xa7, 0xe8, 0x97, 0x2a, 0x1d, 0xf0, 0xd3, 0xaf, 0xf8, 0x3b,
+-      0x6b, 0xec, 0x0c, 0xc4, 0xea, 0xfe, 0xd5, 0xe2, 0xb4, 0x0f, 0xd2, 0x5e,
+-      0xe6, 0xf5, 0xb3, 0x7d, 0x9d, 0x0d, 0x2a, 0xf5, 0xf9, 0x93, 0x3f, 0x96,
+-      0x7c, 0xaf, 0xdc, 0x93, 0xba, 0xab, 0x82, 0xf2, 0x7e, 0x3b, 0xf1, 0xf0,
+-      0x8c, 0x79, 0xb6, 0xda, 0xaa, 0x41, 0xe1, 0x31, 0xce, 0xcd, 0xcd, 0xdf,
+-      0xd4, 0x3a, 0x17, 0x16, 0xdc, 0xa3, 0x62, 0xed, 0xa0, 0xb4, 0x85, 0xd5,
+-      0x8f, 0x93, 0xb8, 0x53, 0xa0, 0x4d, 0x98, 0x07, 0xab, 0xa4, 0xad, 0x8d,
+-      0x6b, 0xb4, 0xa3, 0xa4, 0x1f, 0x58, 0x19, 0xc7, 0xc3, 0xa5, 0xf0, 0x47,
+-      0x64, 0x8e, 0xf5, 0x8b, 0x1d, 0x7c, 0xb6, 0x14, 0x2d, 0xa3, 0xd9, 0xe7,
+-      0x56, 0x8c, 0xbe, 0x37, 0x33, 0x9b, 0xfb, 0xfe, 0xc3, 0x75, 0xe3, 0x2d,
+-      0x8d, 0x7e, 0xac, 0x4b, 0x52, 0xe7, 0x6c, 0x1e, 0x0c, 0xe6, 0x72, 0xd0,
+-      0x4f, 0xa4, 0xbc, 0xd3, 0xea, 0xba, 0x7f, 0x5b, 0x9a, 0xab, 0xf9, 0xd2,
+-      0x8e, 0xa7, 0xd8, 0x8f, 0x65, 0xc3, 0x18, 0x1c, 0x33, 0x11, 0xd5, 0x4d,
+-      0x64, 0xf8, 0x79, 0x43, 0x87, 0x51, 0x42, 0x1b, 0x7f, 0x2a, 0x26, 0x98,
+-      0x97, 0xd5, 0xa4, 0x1f, 0x24, 0x02, 0xca, 0x86, 0x18, 0x70, 0x84, 0xf1,
+-      0xe3, 0x21, 0x7e, 0x86, 0x13, 0x5c, 0x03, 0xe7, 0x6d, 0x23, 0x6e, 0x6c,
+-      0x4b, 0x01, 0x43, 0x09, 0x44, 0xf6, 0x2f, 0x96, 0x58, 0xa6, 0x84, 0xe3,
+-      0x01, 0xe3, 0x6c, 0x93, 0xe6, 0xe7, 0x20, 0x3f, 0x63, 0xdc, 0x53, 0x8e,
+-      0x87, 0x00, 0xf1, 0x30, 0x92, 0xd1, 0x60, 0x64, 0x02, 0x98, 0xa0, 0x6d,
+-      0x5d, 0x1b, 0x56, 0x51, 0x76, 0xa8, 0x12, 0x1f, 0x8d, 0x64, 0x63, 0xa5,
+-      0x75, 0x19, 0xa9, 0x5d, 0xcb, 0xda, 0xa4, 0x7e, 0x2d, 0xb6, 0x54, 0x84,
+-      0x43, 0xc9, 0x4a, 0xab, 0x86, 0xfd, 0x8e, 0xce, 0x7e, 0x55, 0xa9, 0xb1,
+-      0xb6, 0xe2, 0x70, 0xd4, 0xe7, 0xe9, 0xa5, 0xbe, 0x1b, 0x0e, 0xb1, 0xaf,
+-      0x46, 0x1c, 0x89, 0xe6, 0x6b, 0x67, 0xbe, 0x96, 0x9f, 0x49, 0x8e, 0xc8,
+-      0x59, 0x49, 0xd9, 0xca, 0xbd, 0xbc, 0xdf, 0x95, 0xf5, 0x4a, 0x0e, 0x3f,
+-      0xcf, 0x71, 0xa6, 0xff, 0x7e, 0x8a, 0xe3, 0x05, 0x69, 0x07, 0xde, 0xde,
+-      0x14, 0x74, 0xcb, 0x97, 0x8e, 0xd4, 0x7b, 0x93, 0x06, 0x64, 0x6f, 0x1b,
+-      0x39, 0x87, 0xd7, 0xa8, 0xf7, 0x01, 0xca, 0xf9, 0x2f, 0xe8, 0x23, 0x5c,
+-      0x8c, 0x65, 0x2b, 0xb0, 0xab, 0xaf, 0x12, 0x3b, 0xfb, 0x0c, 0xf4, 0x2c,
+-      0x6e, 0xc3, 0xa9, 0xa8, 0x89, 0x75, 0x21, 0x13, 0x2b, 0x19, 0x23, 0xfc,
+-      0x00, 0x0d, 0x4d, 0x87, 0xf1, 0x20, 0x63, 0x65, 0x95, 0xf2, 0xf8, 0x16,
+-      0xde, 0xde, 0xed, 0xc0, 0x7a, 0xfd, 0x8f, 0x68, 0xbf, 0xa6, 0xf9, 0xab,
+-      0x45, 0xb5, 0x18, 0x4c, 0x34, 0xa8, 0xdd, 0x9c, 0x5f, 0xa4, 0x8d, 0xfb,
+-      0x14, 0x74, 0xe0, 0x69, 0xfd, 0xfb, 0x6c, 0xeb, 0xb6, 0x39, 0x34, 0xb9,
+-      0x96, 0xba, 0x96, 0xec, 0xa3, 0x41, 0xdd, 0xca, 0xfb, 0xac, 0x6c, 0xad,
+-      0x74, 0x7d, 0xa3, 0xe4, 0x44, 0x4a, 0x71, 0x92, 0x32, 0x3b, 0x96, 0x8c,
+-      0xd0, 0x55, 0x43, 0x79, 0xba, 0xb1, 0x0b, 0x8f, 0x93, 0x9b, 0xbc, 0x4d,
+-      0xd2, 0x70, 0x6f, 0x5c, 0x41, 0x53, 0xbd, 0x8e, 0xf3, 0xe9, 0x6f, 0xe1,
+-      0xcd, 0xe1, 0x30, 0xde, 0x20, 0x07, 0x58, 0xf0, 0x97, 0xc2, 0xe9, 0x3d,
+-      0x38, 0x9b, 0x0e, 0xe3, 0x4c, 0xd4, 0xdb, 0xfa, 0xbc, 0x52, 0x8b, 0x9f,
+-      0x11, 0xd3, 0xee, 0x8e, 0x03, 0xef, 0xb1, 0x1f, 0x7f, 0xdc, 0x81, 0x4b,
+-      0x69, 0x15, 0x87, 0xb9, 0x37, 0x8e, 0xd0, 0x02, 0x18, 0x6d, 0x1e, 0x1c,
+-      0x1c, 0x78, 0x00, 0x13, 0xa9, 0x07, 0x70, 0x22, 0xf9, 0xb6, 0xe9, 0xd2,
+-      0xa4, 0x06, 0xe6, 0xc2, 0x25, 0x62, 0xea, 0x24, 0xa5, 0x51, 0x7a, 0x4f,
+-      0x2b, 0x71, 0x51, 0x33, 0x44, 0xee, 0x6f, 0xf2, 0xb7, 0x7b, 0xe3, 0x4d,
+-      0xd8, 0x9f, 0xa1, 0x48, 0x13, 0x3a, 0x12, 0x31, 0x19, 0xab, 0x11, 0x31,
+-      0x72, 0xc8, 0x5d, 0x7d, 0xe2, 0x37, 0xef, 0xc6, 0xca, 0x0a, 0x28, 0x2d,
+-      0x75, 0x63, 0xb9, 0x75, 0x34, 0x4d, 0xab, 0x6d, 0x4a, 0xbc, 0x49, 0xb9,
+-      0xf2, 0xb9, 0x1f, 0x26, 0x28, 0xf7, 0x04, 0x65, 0x7b, 0x7d, 0x3f, 0x9a,
+-      0xb8, 0x1f, 0xdf, 0xc2, 0xf9, 0xdd, 0x6d, 0x78, 0x93, 0x58, 0x57, 0xbe,
+-      0xc8, 0xd7, 0xe9, 0xb4, 0x35, 0xb0, 0xef, 0xb4, 0x99, 0xaa, 0x16, 0x99,
+-      0xb6, 0xe1, 0x17, 0x51, 0x91, 0x69, 0x9a, 0xd8, 0xe7, 0xf3, 0xf8, 0xed,
+-      0x23, 0x55, 0xd4, 0x65, 0x5b, 0x77, 0x30, 0x5b, 0xaf, 0x2b, 0xbd, 0xc7,
+-      0x85, 0xcb, 0xd6, 0xdc, 0x64, 0xae, 0x5f, 0x35, 0xbf, 0x5f, 0x98, 0x2b,
+-      0xab, 0x65, 0x7e, 0x86, 0xc9, 0x98, 0x3a, 0xc0, 0x78, 0x91, 0xb6, 0x13,
+-      0x80, 0xe4, 0x9c, 0xeb, 0xe3, 0x5d, 0xb0, 0x87, 0x4a, 0x0d, 0x35, 0xec,
+-      0x9d, 0xea, 0xc0, 0x9b, 0xb8, 0x42, 0x8e, 0x72, 0x57, 0x5c, 0x63, 0x7c,
+-      0x7b, 0x81, 0x63, 0xfd, 0x0b, 0x2e, 0xf2, 0xda, 0x17, 0xcf, 0xda, 0x5a,
+-      0x77, 0x63, 0x1b, 0xee, 0x4b, 0xcb, 0xfa, 0xfe, 0x0b, 0x07, 0xd2, 0x11,
+-      0x49, 0xcb, 0x3a, 0x63, 0xb4, 0x0b, 0x59, 0x67, 0xe5, 0x7f, 0xb0, 0xce,
+-      0x23, 0xec, 0xaf, 0x96, 0x76, 0x94, 0xf7, 0x1b, 0x65, 0x38, 0x98, 0x54,
+-      0x71, 0x52, 0x2f, 0xc5, 0x05, 0x55, 0xf2, 0xf5, 0xd9, 0x5a, 0x66, 0x33,
+-      0xe3, 0xd3, 0x21, 0x7e, 0x9e, 0x62, 0x0c, 0x75, 0x5a, 0x77, 0xe0, 0x84,
+-      0x5e, 0x4b, 0x9c, 0xbf, 0x55, 0x87, 0xe5, 0x1e, 0x03, 0x83, 0x8a, 0x4a,
+-      0x9c, 0x91, 0x9c, 0xaa, 0x75, 0x5f, 0xce, 0x16, 0xb8, 0x20, 0x39, 0x8d,
+-      0x82, 0xd8, 0x6f, 0xcd, 0xcb, 0x16, 0xce, 0xdc, 0x3a, 0xbf, 0x5b, 0xfb,
+-      0x21, 0x55, 0xd0, 0xde, 0x33, 0x9f, 0xad, 0xce, 0xf9, 0x2d, 0x65, 0x47,
+-      0x55, 0x16, 0x2b, 0xc4, 0x87, 0x8d, 0xe7, 0x71, 0x83, 0x7c, 0x7c, 0xdf,
+-      0xa3, 0xf4, 0x41, 0xf4, 0xcf, 0xcd, 0xdf, 0xdb, 0xaa, 0x49, 0x9c, 0x97,
+-      0x7a, 0x74, 0x99, 0x56, 0x00, 0xbb, 0xe5, 0x67, 0x0f, 0x6f, 0xce, 0xf2,
+-      0xf9, 0xf4, 0xe6, 0x6c, 0x8c, 0x7a, 0x74, 0xf3, 0x5d, 0xd6, 0xf7, 0x8f,
+-      0x36, 0xfb, 0x52, 0x37, 0x7c, 0x55, 0x96, 0x2f, 0x5b, 0x67, 0x6d, 0xd0,
+-      0xab, 0x1b, 0xca, 0x8a, 0x46, 0xf1, 0xd7, 0x79, 0x8e, 0x22, 0x6d, 0x02,
+-      0xca, 0x89, 0xa8, 0x61, 0xba, 0xb5, 0x62, 0xfa, 0x7a, 0x28, 0x63, 0x8c,
+-      0xc5, 0xa6, 0xac, 0xba, 0xa7, 0x86, 0x37, 0xd2, 0x12, 0x13, 0x83, 0xfa,
+-      0xfb, 0xbf, 0xb1, 0x6b, 0x37, 0xda, 0x8b, 0x16, 0x93, 0xb3, 0xd3, 0xcf,
+-      0x3d, 0x1b, 0x72, 0xe0, 0xfd, 0x74, 0x76, 0x3d, 0xef, 0x0d, 0x97, 0xe0,
+-      0xdd, 0x94, 0xf8, 0x6b, 0xa8, 0x85, 0xec, 0xf7, 0x64, 0x5a, 0x63, 0x6c,
+-      0x2a, 0xe3, 0xb6, 0x61, 0xdb, 0x98, 0x03, 0xfb, 0xa3, 0x1a, 0x62, 0x89,
+-      0x9f, 0x9a, 0x45, 0x9a, 0x6f, 0xc2, 0x6f, 0x77, 0x60, 0x5f, 0x7a, 0x12,
+-      0x63, 0x7d, 0x1f, 0x9b, 0x76, 0xad, 0x0b, 0x1f, 0x85, 0x26, 0xc9, 0xeb,
+-      0xa4, 0xfe, 0xa9, 0x63, 0xd7, 0x80, 0xc6, 0x58, 0xda, 0x86, 0x9d, 0x8b,
+-      0x5b, 0xb0, 0x6b, 0xac, 0x19, 0xc6, 0x21, 0x0f, 0x76, 0x92, 0xf0, 0x4d,
+-      0x0c, 0x4f, 0xe2, 0x54, 0x52, 0x6b, 0x2a, 0x52, 0x26, 0x71, 0x92, 0xe3,
+-      0x6c, 0x4d, 0xbc, 0x05, 0x83, 0x7d, 0x6c, 0x4b, 0x4a, 0x8e, 0x57, 0xc6,
+-      0x99, 0x44, 0x77, 0xea, 0x76, 0x35, 0x8f, 0x36, 0xec, 0x48, 0x6c, 0x69,
+-      0xcf, 0xd6, 0x3d, 0x88, 0xab, 0x69, 0x4d, 0xe9, 0xe5, 0x1e, 0x1d, 0x4e,
+-      0xe7, 0x6b, 0x20, 0x82, 0xa1, 0x59, 0x3c, 0xdc, 0x96, 0xd6, 0xd1, 0x3b,
+-      0xd0, 0xc2, 0xf6, 0x1a, 0xba, 0x13, 0x52, 0x3f, 0xf6, 0x71, 0x3c, 0x13,
+-      0xef, 0xe9, 0x5e, 0xf7, 0x5d, 0xfc, 0x1e, 0xd1, 0x3b, 0xb1, 0x81, 0xfd,
+-      0x08, 0xe7, 0xd2, 0x14, 0x6f, 0x93, 0x01, 0x3b, 0x7e, 0xa5, 0xdb, 0x61,
+-      0x54, 0xd9, 0x71, 0x44, 0x2f, 0x23, 0x3f, 0xb7, 0xa3, 0x21, 0x44, 0xdf,
+-      0x9c, 0xf3, 0xd5, 0x1f, 0x26, 0x15, 0x3c, 0x40, 0x2c, 0x3d, 0x16, 0x6a,
+-      0x68, 0x5f, 0x2e, 0x6c, 0xf7, 0x80, 0x82, 0x2b, 0xda, 0x35, 0xd3, 0xa0,
+-      0xbf, 0x72, 0xf9, 0xf3, 0x7b, 0xf3, 0x6b, 0x33, 0x5b, 0x03, 0xfe, 0xc2,
+-      0xcc, 0x3f, 0x37, 0xc5, 0xf9, 0x3d, 0xc6, 0xe7, 0xee, 0x5a, 0xd4, 0xd0,
+-      0x29, 0xcf, 0xb9, 0x89, 0xe3, 0xf2, 0x9c, 0xe4, 0xf6, 0x6f, 0x3c, 0xa7,
+-      0x63, 0xdb, 0x40, 0xc4, 0x9a, 0xef, 0xf6, 0x04, 0x16, 0x3a, 0x20, 0x76,
+-      0xd4, 0xa0, 0x5e, 0x02, 0xba, 0x26, 0xf5, 0x19, 0xe4, 0x37, 0xfe, 0xc0,
+-      0x53, 0x10, 0x39, 0x49, 0xbc, 0xf9, 0x16, 0x76, 0x46, 0x87, 0xc1, 0x98,
+-      0x93, 0xf8, 0xe6, 0x5f, 0x3b, 0x84, 0x14, 0x9e, 0x4b, 0xa7, 0xf0, 0xbc,
+-      0x70, 0x6c, 0x2b, 0xc7, 0x96, 0xc6, 0x77, 0xa2, 0x6f, 0x21, 0x66, 0xc5,
+-      0x55, 0x87, 0xf1, 0x44, 0xf4, 0xdd, 0x6a, 0xc9, 0x65, 0x6e, 0x4d, 0x2c,
+-      0x65, 0xff, 0x22, 0x53, 0x6f, 0xab, 0x81, 0x2f, 0xd9, 0xff, 0x52, 0x6c,
+-      0x19, 0x92, 0x9c, 0x90, 0x89, 0xd7, 0xc9, 0xa9, 0xae, 0x50, 0x8f, 0x5a,
+-      0x1a, 0xa5, 0xff, 0x71, 0x45, 0xb3, 0x7c, 0x57, 0x1b, 0xf7, 0x78, 0x16,
+-      0xdc, 0x94, 0x73, 0x59, 0x46, 0x53, 0xee, 0x8a, 0xc9, 0x9e, 0x3b, 0x60,
+-      0xcb, 0x78, 0xf0, 0x18, 0x79, 0x49, 0xe1, 0xc8, 0x8f, 0x14, 0xf1, 0x5f,
+-      0x35, 0xe4, 0xa2, 0xee, 0x03, 0x1e, 0x65, 0xc1, 0x1e, 0x17, 0x1e, 0x88,
+-      0x91, 0xa3, 0xc6, 0x9a, 0xb1, 0x65, 0xaf, 0xc6, 0x36, 0x5e, 0xfd, 0x1c,
+-      0xe3, 0xd6, 0x93, 0xf0, 0x79, 0x86, 0xc8, 0xa5, 0xdc, 0xc4, 0x60, 0xc7,
+-      0x48, 0x39, 0x4a, 0xc8, 0xb3, 0xa5, 0xdc, 0x5c, 0x3a, 0xe2, 0x46, 0x0d,
+-      0xfd, 0x99, 0x3b, 0x73, 0x1e, 0x63, 0x7b, 0xa0, 0x96, 0x84, 0x3f, 0x37,
+-      0x0b, 0x35, 0xa9, 0x57, 0x06, 0x50, 0x9e, 0xd9, 0x84, 0x74, 0x2c, 0x88,
+-      0x52, 0xf2, 0xfb, 0x06, 0x8e, 0x77, 0x7f, 0x4c, 0x63, 0x3f, 0x59, 0x6e,
+-      0xb3, 0x9c, 0xcf, 0xf4, 0x26, 0xbc, 0x6b, 0xa5, 0xde, 0x78, 0x45, 0x7f,
+-      0x0d, 0x45, 0x7d, 0x37, 0xce, 0x9c, 0x69, 0x21, 0xcc, 0x21, 0xf7, 0x68,
+-      0x7d, 0x1a, 0xd9, 0xf3, 0x67, 0x2b, 0x72, 0xeb, 0x09, 0xca, 0x7a, 0x9c,
+-      0x6d, 0xd4, 0x83, 0xd9, 0x98, 0xc1, 0xf5, 0x5c, 0xa4, 0xde, 0xdc, 0xcb,
+-      0xb9, 0x5e, 0x63, 0xec, 0xd0, 0xc9, 0xb5, 0xbc, 0x3f, 0xfc, 0x23, 0xa5,
+-      0x86, 0x6b, 0x99, 0x22, 0x57, 0xfd, 0x38, 0xe5, 0x51, 0x7c, 0x5c, 0xcb,
+-      0x77, 0x79, 0xff, 0x3b, 0x5c, 0xcb, 0xd6, 0xbd, 0xde, 0xd6, 0xe3, 0x8a,
+-      0xb7, 0x7d, 0x8d, 0xe2, 0x53, 0xb7, 0x2a, 0xa5, 0xb8, 0x38, 0x5c, 0x8e,
+-      0x4b, 0xf4, 0xbd, 0xd7, 0x86, 0x2b, 0x71, 0x79, 0xb8, 0x8a, 0x36, 0xa2,
+-      0xb1, 0x0f, 0xd3, 0x2c, 0xd3, 0xdc, 0x98, 0x4a, 0x3f, 0x8f, 0x19, 0xb1,
+-      0x5a, 0x7c, 0x9c, 0xde, 0x80, 0xf2, 0x98, 0xc4, 0x00, 0x1e, 0x7c, 0xc4,
+-      0xfb, 0x1f, 0xa6, 0x47, 0x51, 0xbc, 0xe7, 0x73, 0xb6, 0x31, 0xcd, 0xfb,
+-      0xb9, 0xbe, 0xcb, 0xe9, 0x0e, 0x94, 0xee, 0xd9, 0x08, 0xc7, 0x1e, 0xb3,
+-      0x6b, 0x4b, 0x08, 0x3f, 0xb3, 0x73, 0x2d, 0xdd, 0xba, 0x77, 0xe2, 0x2e,
+-      0x7b, 0x90, 0x7d, 0x8c, 0x2b, 0x0b, 0x32, 0x1b, 0x51, 0xbe, 0xc7, 0x83,
+-      0x67, 0x29, 0xc3, 0x51, 0x68, 0x81, 0x35, 0xca, 0x46, 0x14, 0x8c, 0x64,
+-      0xd7, 0xbf, 0x2e, 0x93, 0xb5, 0x8b, 0xfb, 0x1b, 0xa7, 0xc7, 0x32, 0x6e,
+-      0x8b, 0x77, 0x4f, 0xa6, 0x4b, 0x70, 0x3a, 0x25, 0xf2, 0x81, 0xea, 0x08,
+-      0x8f, 0xa2, 0x70, 0x0f, 0x31, 0x71, 0x58, 0xb7, 0xf8, 0x82, 0xd8, 0xc4,
+-      0x70, 0xfa, 0x76, 0x36, 0x15, 0xc4, 0xce, 0x44, 0x0d, 0xed, 0xa9, 0x16,
+-      0x2b, 0xf7, 0x48, 0x8d, 0x79, 0xe2, 0x5e, 0x17, 0xb5, 0xe8, 0x50, 0xfa,
+-      0x56, 0x7b, 0x6a, 0xa4, 0x6e, 0x0a, 0xb6, 0x9a, 0x98, 0xd4, 0xb3, 0x78,
+-      0x73, 0xcc, 0xaa, 0x61, 0x8b, 0x4d, 0xb6, 0x62, 0xcb, 0x00, 0xda, 0xf7,
+-      0x37, 0x8a, 0x4d, 0x3a, 0x31, 0x44, 0xbe, 0x7f, 0x91, 0xb1, 0xc3, 0x0c,
+-      0xed, 0x73, 0x62, 0x42, 0x01, 0x06, 0x87, 0x5d, 0xf8, 0xf1, 0xb0, 0x07,
+-      0xee, 0x58, 0x31, 0xc6, 0x29, 0xe3, 0x31, 0x72, 0x9c, 0x8f, 0x18, 0x65,
+-      0x8f, 0xd2, 0xa7, 0x7e, 0x18, 0xad, 0x42, 0x26, 0x5d, 0x8b, 0xab, 0xc4,
+-      0x94, 0x34, 0xf7, 0xe3, 0x83, 0x68, 0x00, 0x2f, 0xa7, 0x83, 0x78, 0x3f,
+-      0x2a, 0xd8, 0x13, 0xc4, 0x11, 0xca, 0xaf, 0x28, 0xe6, 0x66, 0xbf, 0x82,
+-      0x43, 0x1e, 0x38, 0x63, 0x9a, 0x67, 0x28, 0xa7, 0x0b, 0x8e, 0x4c, 0x2b,
+-      0xed, 0x46, 0xce, 0x44, 0x88, 0x1f, 0x70, 0xe8, 0x43, 0x8c, 0xb9, 0x07,
+-      0x83, 0xf9, 0xfc, 0xaf, 0xd7, 0x3d, 0x81, 0x99, 0xb4, 0x9d, 0x2f, 0x4d,
+-      0x55, 0x93, 0x98, 0x2a, 0x19, 0xba, 0x12, 0xd5, 0x24, 0x17, 0x48, 0x6c,
+-      0x37, 0x14, 0xe7, 0x62, 0x72, 0x89, 0xaa, 0xad, 0x92, 0x17, 0xe6, 0xfc,
+-      0xe5, 0x6c, 0x99, 0xc9, 0x76, 0x57, 0x31, 0xff, 0xc0, 0xd6, 0x59, 0xb9,
+-      0x1c, 0x93, 0x7a, 0x83, 0xf7, 0xe5, 0x31, 0x5e, 0xe2, 0xb5, 0xdd, 0xa1,
+-      0xd7, 0xa2, 0x7f, 0x3f, 0x4b, 0xea, 0x71, 0xc7, 0x11, 0xa4, 0x4c, 0x6e,
+-      0x17, 0x0f, 0x98, 0x78, 0x93, 0x18, 0x72, 0x39, 0x29, 0xbc, 0x48, 0xf8,
+-      0x50, 0x17, 0x7d, 0x4f, 0x19, 0xf9, 0x80, 0x86, 0x6d, 0xe4, 0xeb, 0xbe,
+-      0xf8, 0x04, 0xe3, 0x91, 0xaf, 0x93, 0x93, 0x95, 0xb3, 0x9b, 0x1f, 0x70,
+-      0xbc, 0x56, 0xec, 0xa4, 0x2d, 0x16, 0x69, 0x77, 0x61, 0x25, 0xf9, 0x8e,
+-      0x43, 0xa3, 0xcb, 0x78, 0x58, 0xfc, 0x86, 0xe4, 0x70, 0x54, 0xa9, 0x95,
+-      0xad, 0x7d, 0x1d, 0xf7, 0xa2, 0xbd, 0xda, 0x05, 0xa9, 0x6f, 0xbd, 0x81,
+-      0x25, 0x48, 0x3d, 0x2a, 0xbe, 0x93, 0x1c, 0x39, 0xac, 0x19, 0xe7, 0x31,
+-      0xcf, 0x62, 0xdd, 0xc5, 0x61, 0x99, 0x4f, 0x15, 0x65, 0xaf, 0xe2, 0x1d,
+-      0xca, 0xf5, 0x52, 0xd4, 0x37, 0x75, 0x1f, 0x1a, 0x4e, 0x5d, 0xb2, 0x4b,
+-      0xed, 0x4f, 0xda, 0x07, 0xa1, 0xb1, 0xbf, 0x4f, 0xa3, 0x21, 0xf4, 0xa9,
+-      0x72, 0x2d, 0xfc, 0xb0, 0x15, 0xdd, 0x43, 0x32, 0x07, 0xd3, 0xac, 0x24,
+-      0x1e, 0x3e, 0x6c, 0x8d, 0x2f, 0x63, 0xdf, 0x1a, 0x5b, 0x78, 0x19, 0x49,
+-      0xe7, 0xe3, 0x8b, 0x49, 0x1c, 0x4e, 0x52, 0xfe, 0x8b, 0xdf, 0xa6, 0x1c,
+-      0x26, 0x31, 0x9c, 0xd2, 0xc8, 0x1d, 0x4b, 0xe0, 0xa9, 0x0e, 0x62, 0x17,
+-      0xfd, 0x75, 0x8c, 0xed, 0xd3, 0xb1, 0x12, 0x18, 0xd5, 0xd9, 0x31, 0xbf,
+-      0x1e, 0xbf, 0x6a, 0x4e, 0x3c, 0x64, 0xc5, 0xa9, 0xbc, 0xfe, 0x1d, 0x9f,
+-      0x99, 0x2d, 0xc7, 0x32, 0xb1, 0x3e, 0x76, 0xd9, 0x9c, 0x68, 0x9d, 0xfe,
+-      0x7b, 0x85, 0x75, 0xa6, 0x2a, 0x62, 0xab, 0xe6, 0x77, 0x56, 0x2e, 0xdd,
+-      0x94, 0xcb, 0x0c, 0xed, 0x2d, 0xf3, 0x41, 0x6b, 0x5e, 0xef, 0xcd, 0x12,
+-      0x2e, 0x5f, 0x17, 0xf7, 0xcc, 0x46, 0x71, 0x15, 0xdb, 0x10, 0x43, 0xc3,
+-      0x5a, 0xd3, 0x29, 0xfc, 0x8b, 0x79, 0xe1, 0xa6, 0x7e, 0x66, 0xf2, 0x9e,
+-      0xf8, 0x9e, 0x0b, 0xb9, 0x9c, 0x8f, 0x3b, 0xc7, 0xf7, 0x27, 0x71, 0x3c,
+-      0x29, 0xd8, 0xef, 0xc1, 0x13, 0x92, 0x9b, 0x52, 0xbd, 0xbd, 0x06, 0x26,
+-      0xc8, 0xf1, 0xde, 0xa6, 0xec, 0x25, 0xff, 0x38, 0x41, 0x9e, 0x37, 0xdd,
+-      0x37, 0x45, 0x90, 0xaa, 0x92, 0x1a, 0x8c, 0xe0, 0xe7, 0x24, 0xb6, 0x27,
+-      0x7f, 0x4a, 0x1c, 0xfb, 0x98, 0xbc, 0xa7, 0x8b, 0x9c, 0x7a, 0x12, 0x5b,
+-      0x52, 0xcd, 0x78, 0x69, 0x6f, 0x0b, 0x71, 0x45, 0xb0, 0xd1, 0x77, 0xea,
+-      0xa2, 0xbd, 0x19, 0xfb, 0x0f, 0xa5, 0x91, 0x1a, 0x11, 0x7f, 0x28, 0x3e,
+-      0x57, 0x7c, 0xa1, 0x86, 0x68, 0xe2, 0x24, 0x0c, 0x7e, 0xef, 0x4c, 0x6c,
+-      0x44, 0x64, 0xe4, 0x2d, 0xf2, 0xf8, 0x49, 0x2c, 0xef, 0xd3, 0xd6, 0x1e,
+-      0xc4, 0x24, 0x56, 0xd1, 0x57, 0x26, 0x13, 0x2d, 0xec, 0xbf, 0x19, 0x3d,
+-      0x7b, 0xbd, 0x56, 0xbe, 0x49, 0x62, 0xf8, 0x6d, 0x63, 0x11, 0x18, 0x43,
+-      0x72, 0x36, 0xc3, 0x85, 0x60, 0xdc, 0xa3, 0x7c, 0x48, 0x3e, 0xdc, 0x10,
+-      0xf7, 0x32, 0x06, 0xf3, 0x1a, 0xab, 0x14, 0x9f, 0xa7, 0xc0, 0x26, 0xb5,
+-      0xc0, 0x19, 0x38, 0xa5, 0x2b, 0x28, 0xba, 0x57, 0x41, 0x88, 0xbe, 0xca,
+-      0x33, 0x8b, 0x3e, 0x64, 0x48, 0x47, 0xcf, 0x00, 0xd7, 0x7b, 0x7d, 0xdf,
+-      0x64, 0xbf, 0x56, 0xb3, 0x3f, 0xd9, 0xbb, 0x16, 0xf4, 0x8c, 0xf9, 0x3a,
+-      0x4e, 0xc1, 0x6d, 0x71, 0xab, 0x9e, 0x81, 0xeb, 0x79, 0x81, 0xd2, 0x8f,
+-      0x1b, 0xbd, 0x81, 0x19, 0x8a, 0xb4, 0xdd, 0x4a, 0xcc, 0x9a, 0xde, 0xde,
+-      0x50, 0x92, 0x8b, 0xc9, 0x3f, 0x6d, 0x62, 0x17, 0xdd, 0x96, 0xbd, 0x88,
+-      0x2c, 0x7a, 0x92, 0x11, 0xea, 0xf4, 0x4f, 0xcc, 0x54, 0x6b, 0x2b, 0xe7,
+-      0xd9, 0x28, 0xb5, 0x31, 0x0b, 0x13, 0xce, 0x4a, 0x2e, 0xce, 0x29, 0x98,
+-      0xd0, 0xdd, 0xee, 0xa2, 0x3e, 0x15, 0x12, 0x97, 0x8a, 0x46, 0x5d, 0x70,
+-      0x1d, 0x2c, 0x41, 0xe1, 0xa0, 0xf0, 0x31, 0xc9, 0x41, 0xa8, 0xb0, 0x8f,
+-      0x96, 0xd2, 0x06, 0xb8, 0x87, 0xa3, 0xb4, 0xb1, 0xa8, 0x1b, 0xf3, 0x46,
+-      0xdd, 0xf8, 0x31, 0x31, 0xa0, 0x66, 0x54, 0xc3, 0x38, 0x31, 0xc0, 0x3d,
+-      0x1a, 0xc0, 0x58, 0x34, 0x88, 0x19, 0xa3, 0xe3, 0xca, 0x1b, 0xe9, 0x66,
+-      0xee, 0xb7, 0x8c, 0x23, 0x32, 0xcc, 0xef, 0xa9, 0xec, 0x67, 0x0b, 0xb1,
+-      0x4e, 0xf6, 0x36, 0x80, 0x1d, 0x03, 0x69, 0x2c, 0xdb, 0x63, 0xe2, 0x9f,
+-      0xf4, 0x06, 0x77, 0x91, 0x22, 0xb1, 0x80, 0x89, 0x34, 0xfd, 0xda, 0x0a,
+-      0xdd, 0xbb, 0x56, 0xce, 0x3b, 0xb7, 0x57, 0x99, 0x28, 0x08, 0x79, 0x75,
+-      0xa2, 0xfb, 0xda, 0x22, 0x45, 0x7c, 0x54, 0x83, 0x67, 0x03, 0xe6, 0x22,
+-      0x5b, 0x57, 0xbc, 0x0f, 0x1b, 0x54, 0x85, 0xb6, 0xd8, 0x82, 0x9d, 0x15,
+-      0x86, 0xeb, 0x4a, 0xa3, 0x69, 0xae, 0x0b, 0xd5, 0xcd, 0xb2, 0x72, 0xd0,
+-      0xb6, 0xf5, 0xfc, 0x6e, 0xe3, 0x9a, 0x65, 0xdd, 0x1d, 0x88, 0xed, 0x56,
+-      0x90, 0xf6, 0x77, 0x20, 0x3a, 0xdc, 0x21, 0xfc, 0x89, 0x78, 0xd0, 0x4b,
+-      0x3c, 0x30, 0xbb, 0x9e, 0x0e, 0x3d, 0x88, 0xcb, 0x96, 0xc7, 0x97, 0x67,
+-      0xbc, 0x01, 0x8f, 0x6d, 0xfa, 0x1e, 0xe8, 0xb3, 0x25, 0xcf, 0x21, 0x76,
+-      0xd3, 0xdc, 0x27, 0xbc, 0xd9, 0xdf, 0xdb, 0xc3, 0xbd, 0x7f, 0xe8, 0x80,
+-      0xf8, 0x17, 0xd3, 0xec, 0x25, 0x2f, 0x45, 0x85, 0xac, 0x41, 0x43, 0x3c,
+-      0x61, 0x7e, 0x5c, 0xa3, 0xf9, 0xa6, 0x76, 0xd1, 0x8f, 0x9f, 0xdf, 0xd3,
+-      0xb0, 0x61, 0x83, 0x70, 0x96, 0x45, 0x1a, 0x63, 0xe9, 0x34, 0xce, 0x8d,
+-      0xcc, 0x47, 0xea, 0x21, 0xae, 0x87, 0xfb, 0xe4, 0x8c, 0x7f, 0xc1, 0x38,
+-      0x43, 0xb0, 0x4f, 0x53, 0x0f, 0x13, 0xf7, 0x6c, 0xa3, 0x7e, 0x6c, 0xa9,
+-      0x80, 0x71, 0xa5, 0x51, 0xc6, 0xbf, 0x3e, 0x7f, 0xae, 0xb7, 0x19, 0xbb,
+-      0xf6, 0x0a, 0xaf, 0x10, 0xfe, 0xe5, 0x33, 0x3e, 0x40, 0x0b, 0x92, 0x63,
+-      0xd9, 0xb1, 0xa2, 0x89, 0x5b, 0xf5, 0x44, 0xf6, 0xfc, 0x24, 0x76, 0x50,
+-      0x27, 0x5d, 0xec, 0x9f, 0x3e, 0x85, 0xfd, 0x69, 0x81, 0x22, 0x19, 0x6f,
+-      0xf4, 0x27, 0xe6, 0xce, 0x6a, 0x91, 0x8d, 0xf4, 0xff, 0x9b, 0x6a, 0xc1,
+-      0x8b, 0x75, 0xa1, 0xaf, 0x5a, 0xeb, 0x15, 0x7e, 0x4b, 0xce, 0x3a, 0x3f,
+-      0x1f, 0x79, 0xe6, 0x76, 0xf3, 0xf9, 0x9c, 0xed, 0x64, 0x4e, 0x1d, 0xd8,
+-      0xb1, 0x1b, 0x46, 0xb1, 0xa6, 0x45, 0xe6, 0x2b, 0x1d, 0xe8, 0xa5, 0x7c,
+-      0xb7, 0x25, 0x3b, 0xb0, 0x9f, 0xf6, 0x3a, 0xa8, 0x1f, 0xab, 0xb1, 0xa1,
+-      0x7e, 0xca, 0x8e, 0x89, 0x7f, 0x94, 0x9a, 0xc5, 0x82, 0x45, 0x7e, 0xda,
+-      0x56, 0x07, 0xe2, 0xa9, 0x73, 0xb3, 0xad, 0x9a, 0xa8, 0x4d, 0x7c, 0x9e,
+-      0xc8, 0xa2, 0x13, 0xc5, 0x7d, 0x27, 0xe1, 0xec, 0xeb, 0x44, 0x91, 0x7f,
+-      0x09, 0x56, 0x84, 0x2e, 0x98, 0x97, 0x35, 0x87, 0xfb, 0x38, 0xe5, 0x73,
+-      0x2c, 0x58, 0xc3, 0x98, 0x91, 0x71, 0xca, 0xd0, 0x1c, 0xda, 0x7d, 0x23,
+-      0x76, 0x8c, 0xc9, 0x59, 0x08, 0x1b, 0x56, 0x2d, 0x96, 0x58, 0x5c, 0xa1,
+-      0x5e, 0xcf, 0x62, 0x3c, 0xa9, 0xa9, 0xcf, 0x59, 0xe7, 0x56, 0xc8, 0xb9,
+-      0xaa, 0x3c, 0x78, 0xd2, 0x3a, 0xaf, 0x21, 0xf7, 0x37, 0x31, 0x0e, 0xd8,
+-      0x84, 0x9a, 0x98, 0x61, 0x8a, 0xbc, 0x8f, 0x23, 0xf2, 0xa2, 0x8d, 0xf3,
+-      0x68, 0x5a, 0xe4, 0xdf, 0x30, 0xa5, 0x88, 0x3e, 0xfb, 0xdb, 0x47, 0x15,
+-      0xdd, 0xb5, 0x3a, 0xa3, 0x20, 0xd0, 0xc7, 0xbe, 0x42, 0x23, 0xb3, 0xb3,
+-      0xb9, 0xf1, 0x3c, 0xbf, 0xdb, 0x44, 0x5e, 0xb0, 0x09, 0x65, 0x31, 0xe1,
+-      0xe4, 0x82, 0x0b, 0x91, 0xa5, 0xe5, 0x7c, 0x3e, 0x1d, 0xf2, 0xb7, 0x96,
+-      0x2a, 0xc2, 0x7d, 0xfc, 0x4d, 0xab, 0x14, 0xe1, 0x2a, 0xf2, 0x9c, 0xee,
+-      0xaa, 0xcf, 0x9c, 0xcf, 0xd5, 0x31, 0x1b, 0x89, 0x0d, 0x72, 0xce, 0x24,
+-      0x7f, 0xd6, 0xea, 0x46, 0xce, 0xda, 0x19, 0x97, 0xd8, 0xe1, 0x68, 0x68,
+-      0x59, 0xb4, 0x89, 0x38, 0x67, 0x2e, 0x39, 0x44, 0xbd, 0xbf, 0x88, 0x2a,
+-      0xfc, 0x73, 0x54, 0x30, 0xcd, 0x83, 0x9f, 0x47, 0x0b, 0x25, 0x26, 0x4e,
+-      0x49, 0x5e, 0xf6, 0x4c, 0xd2, 0x30, 0x29, 0xd7, 0x96, 0x55, 0xd4, 0xa5,
+-      0x40, 0xa8, 0x14, 0xa8, 0xee, 0x7e, 0xd2, 0x69, 0xc5, 0xe8, 0x65, 0xa8,
+-      0x20, 0xfe, 0xf7, 0x0d, 0xfd, 0xa1, 0xf3, 0x0e, 0xc4, 0xe0, 0x62, 0xc9,
+-      0x15, 0xda, 0xb1, 0x2d, 0xf4, 0x1b, 0x33, 0xd5, 0x26, 0xcf, 0xd4, 0xe2,
+-      0xdc, 0x6e, 0xd1, 0xd3, 0x00, 0x0a, 0xe3, 0xe7, 0xa9, 0x93, 0x2a, 0xce,
+-      0x46, 0x7d, 0xfa, 0x1a, 0xdb, 0xb7, 0xa8, 0xff, 0xf3, 0x6e, 0xc2, 0xed,
+-      0x79, 0xda, 0x03, 0x78, 0xdc, 0xc2, 0xed, 0x30, 0xb6, 0xd0, 0x2f, 0x90,
+-      0xb7, 0xed, 0x7b, 0xd2, 0xa6, 0xd2, 0x9f, 0xfb, 0x54, 0x1f, 0x63, 0xea,
+-      0x2d, 0x1c, 0x43, 0xf8, 0xe4, 0x4c, 0xf2, 0xbd, 0xa7, 0xa3, 0x0d, 0x9e,
+-      0x5f, 0xe3, 0x09, 0xda, 0xa3, 0x8c, 0x21, 0x6b, 0xd2, 0x50, 0xca, 0xd8,
+-      0xf1, 0x04, 0xd7, 0xb1, 0xad, 0x22, 0x3b, 0x6e, 0x79, 0xae, 0xef, 0xf8,
+-      0x90, 0xf0, 0xad, 0x7b, 0xb0, 0xc6, 0xea, 0x3b, 0x68, 0xd9, 0xe6, 0xbe,
+-      0xa8, 0x82, 0x19, 0xf5, 0x1a, 0x12, 0xe9, 0x66, 0x6c, 0xac, 0xac, 0xc5,
+-      0xfe, 0xc4, 0x26, 0x2c, 0x24, 0xe7, 0x7d, 0xa4, 0xd2, 0xa0, 0x5f, 0x24,
+-      0x06, 0xc5, 0x35, 0x75, 0xbe, 0xf2, 0x8d, 0x5c, 0xae, 0xba, 0x0a, 0x8e,
+-      0xb8, 0xf8, 0xbb, 0x02, 0xf4, 0xab, 0x73, 0x51, 0x62, 0x9d, 0x81, 0xcc,
+-      0xf6, 0xbd, 0x6b, 0xc8, 0x9b, 0xf3, 0x81, 0x44, 0x8d, 0xb8, 0x75, 0x4e,
+-      0x25, 0xf0, 0x3c, 0x79, 0x44, 0x8a, 0xde, 0xaf, 0x20, 0xac, 0xa5, 0xd6,
+-      0xa3, 0x08, 0xc6, 0x2c, 0xc1, 0x43, 0x79, 0x66, 0xce, 0x2d, 0x73, 0xaa,
+-      0xcc, 0xcd, 0x29, 0x7f, 0xff, 0x34, 0xef, 0x89, 0x6e, 0x09, 0xb7, 0x90,
+-      0xdf, 0x8b, 0xd1, 0x4a, 0x7d, 0xaa, 0xe2, 0x9c, 0x13, 0x09, 0xb9, 0xef,
+-      0xd5, 0x0d, 0x5b, 0x23, 0x3e, 0xdb, 0x93, 0xd5, 0xc1, 0xb5, 0x75, 0xdc,
+-      0xff, 0xf2, 0x46, 0x4c, 0x8d, 0x88, 0x2f, 0xfb, 0xc3, 0x67, 0x50, 0x8c,
+-      0xeb, 0x67, 0x50, 0x44, 0xae, 0xde, 0x53, 0xef, 0xa0, 0x61, 0xe2, 0x31,
+-      0xdb, 0x61, 0x13, 0x33, 0x45, 0xc6, 0x71, 0xb7, 0xc4, 0x9a, 0x36, 0x72,
+-      0x08, 0x23, 0x3d, 0xee, 0x16, 0x3f, 0xe9, 0x88, 0x03, 0xf3, 0xe2, 0x06,
+-      0x0a, 0xc3, 0xda, 0xbe, 0x2b, 0xf6, 0x6b, 0x66, 0xfb, 0xac, 0x39, 0x8c,
+-      0xf9, 0x6e, 0xac, 0xb9, 0x97, 0x73, 0xb7, 0x6b, 0x3f, 0x31, 0xef, 0xab,
+-      0x92, 0x39, 0xfe, 0xd2, 0x9d, 0x3d, 0xfb, 0x70, 0x07, 0xe5, 0x92, 0x97,
+-      0x89, 0x49, 0xfd, 0xf9, 0x2b, 0xf3, 0x9b, 0x37, 0xdd, 0x17, 0x2e, 0x23,
+-      0x7a, 0x3a, 0xfd, 0x3c, 0xa0, 0xe8, 0xac, 0xd4, 0x56, 0x26, 0x71, 0x28,
+-      0x29, 0xba, 0x2b, 0x32, 0x8e, 0xe0, 0x22, 0x79, 0x61, 0x41, 0xff, 0x24,
+-      0x06, 0xc9, 0x0b, 0xed, 0x71, 0xef, 0x3e, 0x4a, 0x12, 0x1b, 0xd5, 0x25,
+-      0xc4, 0xea, 0x32, 0xce, 0x23, 0x3f, 0x87, 0x3a, 0x4b, 0xee, 0xe2, 0x5f,
+-      0x76, 0x72, 0xbd, 0x45, 0xe4, 0x48, 0xcd, 0xb1, 0x42, 0x68, 0x15, 0xe5,
+-      0x28, 0xd5, 0xe4, 0x0c, 0x7c, 0xb6, 0x5d, 0x94, 0x73, 0x29, 0xd1, 0xe6,
+-      0x62, 0x95, 0xd5, 0xd6, 0x63, 0x9d, 0x01, 0xd1, 0x2a, 0xc5, 0xff, 0x8a,
+-      0xcf, 0x25, 0xdf, 0x5e, 0x2c, 0x3e, 0x37, 0xcc, 0xb9, 0xcd, 0xc9, 0xd5,
+-      0x99, 0x56, 0x59, 0xf7, 0xf7, 0x25, 0x2e, 0x7c, 0xd9, 0x9f, 0xf8, 0x3d,
+-      0x9f, 0xe9, 0x80, 0xba, 0xb7, 0x18, 0x0f, 0xfd, 0x65, 0x09, 0xf4, 0xca,
+-      0x6c, 0xae, 0x7c, 0x5e, 0x38, 0x1a, 0x32, 0x13, 0xc2, 0x93, 0xee, 0x84,
+-      0x67, 0xb6, 0x8c, 0x25, 0x18, 0x20, 0x7b, 0x21, 0x7b, 0x27, 0x39, 0xdc,
+-      0xdb, 0xd5, 0x18, 0xbc, 0xea, 0xc4, 0xf5, 0x7d, 0x98, 0x0f, 0xed, 0xe1,
+-      0x2a, 0xae, 0x2d, 0xeb, 0x23, 0x76, 0xd0, 0x47, 0x04, 0xfc, 0x59, 0x0c,
+-      0x93, 0x1a, 0xbd, 0x93, 0x3e, 0x62, 0x84, 0x3e, 0xe2, 0xa2, 0x5e, 0x8e,
+-      0xe5, 0x39, 0x1f, 0xd1, 0x6e, 0xd3, 0xad, 0xfe, 0x9d, 0xda, 0x7d, 0x35,
+-      0xc4, 0x30, 0x8e, 0xf1, 0xb5, 0x9b, 0xb8, 0xd8, 0x4c, 0xed, 0x97, 0xe6,
+-      0x23, 0x55, 0xb2, 0xc6, 0xe6, 0x9a, 0x6c, 0x8e, 0xbc, 0x03, 0xfb, 0x88,
+-      0x8f, 0x35, 0x9a, 0x3c, 0xa3, 0x25, 0x6b, 0xec, 0x1d, 0xe8, 0x67, 0xff,
+-      0x7d, 0xc4, 0xc8, 0x18, 0x31, 0x52, 0x5f, 0x78, 0xec, 0x45, 0x15, 0xf5,
+-      0x1d, 0x64, 0x0f, 0xdf, 0x16, 0x6c, 0x79, 0x99, 0xd8, 0xf2, 0x3c, 0x31,
+-      0x72, 0x67, 0x4a, 0xc6, 0x91, 0xf1, 0xf2, 0xe3, 0x48, 0x9f, 0xff, 0x66,
+-      0xae, 0xaf, 0x92, 0xb9, 0xde, 0x6e, 0x1e, 0xf2, 0xdb, 0x9f, 0xf2, 0xef,
+-      0x62, 0x8b, 0x43, 0xf5, 0x26, 0xa6, 0x9f, 0xa9, 0x98, 0x24, 0xbe, 0x5a,
+-      0x71, 0x00, 0xfd, 0x6b, 0x04, 0x2b, 0x17, 0xab, 0xb8, 0x1c, 0x9d, 0x44,
+-      0xd1, 0x81, 0x3c, 0x16, 0x99, 0x4b, 0x4e, 0x10, 0x87, 0x06, 0x21, 0xd8,
+-      0xd3, 0xc4, 0x3d, 0x30, 0x68, 0x13, 0x65, 0x18, 0x4d, 0xca, 0xd9, 0x0b,
+-      0x13, 0xbb, 0x42, 0x2e, 0x72, 0xd8, 0xee, 0xe3, 0x05, 0x96, 0x4f, 0x28,
+-      0x23, 0x5e, 0xe7, 0xf9, 0xb5, 0x70, 0x6b, 0xc1, 0x1a, 0xc6, 0x11, 0x43,
+-      0x76, 0x14, 0x2c, 0xca, 0xc6, 0x0e, 0xe7, 0xda, 0xa4, 0x5d, 0x2d, 0x06,
+-      0x77, 0x8b, 0xae, 0xf9, 0x50, 0xa3, 0x9d, 0x67, 0x2c, 0x01, 0xbc, 0x1b,
+-      0xb5, 0xdd, 0xe9, 0x22, 0x07, 0xee, 0xd2, 0x17, 0xe3, 0xda, 0xcc, 0x2d,
+-      0xb4, 0x6f, 0x37, 0x7f, 0x9b, 0xc0, 0xc1, 0xa8, 0x0b, 0x05, 0x56, 0x8d,
+-      0xb2, 0x9c, 0xeb, 0xc9, 0xea, 0xcb, 0x36, 0xea, 0x4b, 0x21, 0x63, 0xb3,
+-      0x15, 0x96, 0x5d, 0x4a, 0x3f, 0x93, 0xd6, 0xbb, 0x32, 0xda, 0x62, 0xe1,
+-      0xad, 0x41, 0xfa, 0xc0, 0x32, 0xc4, 0xfb, 0xba, 0x70, 0x36, 0x54, 0x86,
+-      0xd8, 0x01, 0xb1, 0xa7, 0x5a, 0xc1, 0x4d, 0x8e, 0xdb, 0x44, 0xf9, 0xa8,
+-      0xc4, 0x95, 0x86, 0x4e, 0xbb, 0xbd, 0x0c, 0x17, 0x2a, 0x18, 0xaf, 0x5a,
+-      0xef, 0x13, 0xb5, 0x62, 0x7f, 0x6e, 0x8f, 0x54, 0xf2, 0x9b, 0xd6, 0xeb,
+-      0x7c, 0x39, 0xbf, 0x96, 0xbc, 0x7d, 0x66, 0x6b, 0xe4, 0x3d, 0xe4, 0x30,
+-      0x2f, 0x49, 0x3e, 0xc8, 0xe6, 0xa3, 0xdf, 0x60, 0x5c, 0x34, 0x26, 0xb2,
+-      0xce, 0xeb, 0xd6, 0xeb, 0x35, 0xd9, 0x33, 0x3d, 0xf9, 0x3d, 0xc8, 0x5f,
+-      0x6b, 0x6b, 0x8b, 0x95, 0x5f, 0x98, 0xcf, 0x56, 0xcb, 0xfc, 0xae, 0x32,
+-      0x0e, 0xfb, 0x31, 0x7f, 0x5f, 0x86, 0x9e, 0xa1, 0xe9, 0x7e, 0x41, 0x6c,
+-      0xce, 0x73, 0xd3, 0xd9, 0xc3, 0x8a, 0xb8, 0xbc, 0xbf, 0x75, 0x34, 0xf4,
+-      0x24, 0xf7, 0xc1, 0xbf, 0xb0, 0xc1, 0xca, 0xa5, 0x90, 0xe3, 0x32, 0xfe,
+-      0x10, 0x3c, 0x35, 0xe8, 0xcf, 0xcb, 0xf0, 0xb3, 0xa4, 0xf8, 0x57, 0x13,
+-      0x85, 0xa1, 0x12, 0xfa, 0xbb, 0xee, 0xe7, 0x2a, 0x2c, 0xce, 0x5c, 0x86,
+-      0x4a, 0xea, 0x5e, 0xff, 0xd0, 0xed, 0xf4, 0xfc, 0x86, 0x0f, 0x48, 0x87,
+-      0x14, 0x62, 0xc2, 0x6f, 0xcc, 0x5d, 0x8f, 0x66, 0x9f, 0x39, 0x97, 0x74,
+-      0xe1, 0xa3, 0x50, 0x3b, 0x26, 0x2a, 0xc2, 0x18, 0x48, 0x14, 0xa1, 0x7d,
+-      0x56, 0xbd, 0xf5, 0xce, 0x45, 0x4d, 0xdc, 0x83, 0xf3, 0x51, 0x27, 0x9a,
+-      0x66, 0x7b, 0xac, 0x7c, 0x92, 0x8d, 0x76, 0xf1, 0x76, 0x34, 0x42, 0x5f,
+-      0xe0, 0xb9, 0xc9, 0x3f, 0x14, 0x68, 0x8b, 0x70, 0x7f, 0x0e, 0xc3, 0xf7,
+-      0x27, 0x3e, 0x27, 0xc6, 0x94, 0x1b, 0x33, 0xc3, 0x65, 0xb8, 0x7b, 0x40,
+-      0xce, 0x29, 0x48, 0x9d, 0x4a, 0x9b, 0x9a, 0xaf, 0x94, 0x61, 0xc9, 0x90,
+-      0xe0, 0xb9, 0x9c, 0xfd, 0x48, 0x87, 0x5c, 0xb1, 0x36, 0xee, 0x51, 0x27,
+-      0xea, 0xf7, 0x5a, 0x72, 0x55, 0xed, 0x8a, 0xd9, 0x75, 0x49, 0x8f, 0xe8,
+-      0xf4, 0x67, 0x9d, 0xf7, 0x53, 0xef, 0xa7, 0x42, 0xde, 0xf6, 0x99, 0x76,
+-      0xad, 0xe3, 0x57, 0x4a, 0x10, 0xa3, 0x19, 0xa0, 0x6f, 0x24, 0x80, 0x0f,
+-      0x12, 0xc2, 0xed, 0x03, 0x78, 0x7f, 0x2c, 0x88, 0x77, 0xe8, 0x87, 0x8a,
+-      0xe2, 0xde, 0xc8, 0x33, 0x8c, 0xdd, 0xde, 0xe5, 0x75, 0x61, 0x5c, 0xc7,
+-      0x15, 0xca, 0xcf, 0x19, 0x6f, 0xc4, 0xa5, 0xb1, 0x6f, 0xe0, 0xf2, 0x5e,
+-      0x05, 0xc7, 0xb4, 0x6f, 0xe0, 0xe2, 0xa1, 0x4e, 0x2c, 0xda, 0x2b, 0x67,
+-      0xf5, 0x8e, 0x86, 0x54, 0xfa, 0x81, 0x27, 0xeb, 0xcc, 0xae, 0x17, 0xf4,
+-      0x7a, 0x62, 0x86, 0x57, 0x6f, 0x67, 0x6c, 0x24, 0xf8, 0x1d, 0xb1, 0xc9,
+-      0x9e, 0xc9, 0xde, 0x75, 0xe2, 0xb2, 0x85, 0xd9, 0xb7, 0xc7, 0x89, 0x1b,
+-      0x78, 0x2d, 0xe3, 0x88, 0x6d, 0xdf, 0x81, 0x57, 0x19, 0x94, 0x6e, 0x61,
+-      0x3b, 0x17, 0x71, 0xee, 0xe9, 0x68, 0x11, 0x0a, 0xab, 0xcb, 0x2d, 0x7b,
+-      0x2b, 0x8e, 0x07, 0x70, 0x9a, 0xb2, 0x5b, 0x59, 0xed, 0xe5, 0xb5, 0xf8,
+-      0xd8, 0x20, 0xe3, 0x93, 0x99, 0xf8, 0xe0, 0x26, 0xdf, 0xfa, 0xaa, 0x85,
+-      0x0d, 0x0e, 0xed, 0x81, 0x39, 0x59, 0x6c, 0x20, 0xa0, 0x13, 0x93, 0x25,
+-      0x27, 0x58, 0xae, 0x69, 0x1b, 0xbe, 0x4b, 0x1b, 0x4f, 0x87, 0x8e, 0xfd,
+-      0x49, 0x29, 0x39, 0xf0, 0x0b, 0xa1, 0x7a, 0xa3, 0x02, 0x2b, 0x78, 0x7f,
+-      0x62, 0x91, 0x8a, 0x75, 0xfc, 0xf6, 0xb3, 0x5d, 0x90, 0xf3, 0xb8, 0x6a,
+-      0xa6, 0x54, 0x1f, 0xff, 0xae, 0xa5, 0x2f, 0xdf, 0x84, 0xb3, 0xb1, 0x86,
+-      0xf6, 0x11, 0xe5, 0x8a, 0x69, 0x54, 0xd7, 0xf1, 0xb7, 0x2a, 0x9c, 0x8b,
+-      0x7a, 0x27, 0x0e, 0xa1, 0xc1, 0x33, 0xa5, 0xec, 0x37, 0x0d, 0x55, 0xf6,
+-      0x47, 0xd6, 0x2b, 0xcf, 0xdf, 0xc5, 0xfb, 0x17, 0xa6, 0xe9, 0xe1, 0x8d,
+-      0xf8, 0xca, 0x79, 0x5d, 0xff, 0x84, 0x83, 0x98, 0x4b, 0x86, 0xf5, 0x06,
+-      0x75, 0x0b, 0xb1, 0x20, 0xa2, 0xde, 0x4e, 0xff, 0x8a, 0xa8, 0x7f, 0x61,
+-      0xc6, 0x8b, 0x65, 0x50, 0x2d, 0x5f, 0xd4, 0x8a, 0xe4, 0xd0, 0x74, 0x1e,
+-      0x29, 0x7a, 0x97, 0xe5, 0xa4, 0xed, 0x15, 0xdd, 0xc7, 0x9d, 0xf4, 0x87,
+-      0x09, 0x62, 0x78, 0x9c, 0x18, 0x5e, 0x48, 0x0c, 0xbf, 0xba, 0xa7, 0x18,
+-      0x67, 0xf7, 0x34, 0x21, 0x5d, 0x21, 0xcf, 0xd8, 0xe1, 0xe4, 0xea, 0x52,
+-      0x96, 0x6f, 0xb7, 0xa1, 0xa6, 0x7f, 0xa9, 0x9c, 0x75, 0x85, 0xf8, 0xd0,
+-      0x82, 0x38, 0x11, 0xb1, 0xd5, 0x0e, 0x87, 0xf5, 0x7e, 0xc1, 0x8c, 0x9b,
+-      0xf4, 0xcf, 0xa5, 0x15, 0xa2, 0xa5, 0x4a, 0xf0, 0xe1, 0xe2, 0x1c, 0xf1,
+-      0x99, 0x3f, 0xe5, 0x5c, 0x8e, 0x53, 0xa7, 0x9f, 0xd2, 0xef, 0x91, 0x1a,
+-      0x1d, 0xdb, 0xcb, 0x73, 0x12, 0xc3, 0x98, 0xd8, 0x41, 0x0d, 0xab, 0xaf,
+-      0x36, 0x91, 0xd0, 0xc3, 0xf4, 0x4f, 0x21, 0x44, 0x2a, 0x82, 0xf4, 0x4b,
+-      0x72, 0xad, 0xe2, 0x12, 0xe3, 0xaf, 0x4c, 0x50, 0xc1, 0x47, 0x5f, 0x13,
+-      0xbf, 0xef, 0xd7, 0xcf, 0x2a, 0xa7, 0x67, 0x65, 0xdf, 0x6b, 0x10, 0x8c,
+-      0x28, 0xb7, 0x30, 0xa2, 0xd0, 0xe2, 0x40, 0xb3, 0x2d, 0x6c, 0xf1, 0xd8,
+-      0xe4, 0x4c, 0x51, 0x34, 0x74, 0x6f, 0xa2, 0x61, 0xc2, 0x67, 0x27, 0x1f,
+-      0xfb, 0xe3, 0xaf, 0x91, 0x87, 0x59, 0x7c, 0x60, 0xba, 0xdf, 0x69, 0x02,
+-      0xa6, 0xcb, 0x23, 0x7f, 0x76, 0xd9, 0x93, 0xc5, 0xca, 0x72, 0xe1, 0x6d,
+-      0xff, 0xcf, 0x6c, 0xbd, 0x69, 0xfe, 0x79, 0x1c, 0xf9, 0x25, 0xaf, 0xe5,
+-      0x79, 0xb1, 0x3b, 0xea, 0x45, 0xfc, 0x1f, 0xcd, 0xc7, 0x2d, 0xee, 0x76,
+-      0x6c, 0x8e, 0x9c, 0xcb, 0x74, 0xf4, 0xff, 0xfd, 0x1c, 0x79, 0x9f, 0xc1,
+-      0x36, 0x8d, 0x03, 0x64, 0xfd, 0xea, 0x3b, 0xe6, 0x2a, 0x6b, 0xae, 0xa7,
+-      0x73, 0xed, 0x24, 0x56, 0x96, 0xb9, 0x28, 0xf8, 0x81, 0xd6, 0xa0, 0x9e,
+-      0x46, 0xa9, 0xe0, 0x49, 0x44, 0xea, 0x91, 0xc5, 0x9a, 0xcf, 0x7d, 0x90,
+-      0xdf, 0xbb, 0x78, 0xff, 0x35, 0xcd, 0xd1, 0xf4, 0x2c, 0xa4, 0x06, 0x6b,
+-      0xe3, 0x5e, 0x35, 0xb8, 0x4f, 0xc3, 0x1f, 0x29, 0x54, 0xa6, 0xcc, 0xf6,
+-      0x2a, 0x69, 0x93, 0xad, 0xc5, 0x42, 0x39, 0x6f, 0xe5, 0x49, 0xb2, 0x3a,
+-      0x53, 0x4b, 0x9d, 0x11, 0xec, 0x12, 0xde, 0xb1, 0x80, 0x6b, 0x57, 0x31,
+-      0x34, 0x26, 0x1c, 0xc1, 0x65, 0xf1, 0x20, 0xb5, 0xae, 0xce, 0xb3, 0x1e,
+-      0xca, 0x5c, 0x62, 0x2c, 0xb6, 0xea, 0xb8, 0xd3, 0x86, 0xb7, 0xee, 0xb4,
+-      0x85, 0x97, 0xfe, 0xd9, 0xfd, 0x8d, 0x77, 0xcf, 0x95, 0x77, 0x5f, 0xc8,
+-      0xe6, 0x24, 0x2f, 0xeb, 0x96, 0xba, 0xe1, 0x72, 0xf2, 0xaa, 0x41, 0xc6,
+-      0xf2, 0xcb, 0x83, 0xbf, 0x33, 0xbf, 0xed, 0x88, 0x78, 0xec, 0xa8, 0xf3,
+-      0xf4, 0xe0, 0x9a, 0x99, 0xaa, 0xb2, 0xee, 0xcf, 0x95, 0xf7, 0x0d, 0x9c,
+-      0xd2, 0x3f, 0xb9, 0xc8, 0xdd, 0x75, 0x26, 0xe3, 0x64, 0xdb, 0x32, 0x3b,
+-      0xed, 0x82, 0x32, 0x33, 0xeb, 0x67, 0xd5, 0xb9, 0x6d, 0x4a, 0x3d, 0xb5,
+-      0xa3, 0x0a, 0x47, 0xa8, 0xbf, 0x47, 0xc6, 0xc4, 0xff, 0xa9, 0x38, 0x4c,
+-      0x3b, 0x3d, 0x54, 0xef, 0xeb, 0xbc, 0xcc, 0xb8, 0xf1, 0x43, 0xf2, 0xf9,
+-      0x37, 0x34, 0x6f, 0xfb, 0x29, 0xc9, 0x29, 0x86, 0x1c, 0x38, 0x13, 0xbc,
+-      0x66, 0xe5, 0x78, 0x63, 0x07, 0x54, 0x0c, 0x26, 0xb2, 0xf6, 0xfe, 0x0a,
+-      0xed, 0xf8, 0xc6, 0x99, 0x03, 0x1d, 0x5b, 0x06, 0xc4, 0x3e, 0x1a, 0x2d,
+-      0x3b, 0xba, 0x91, 0x13, 0x12, 0xbc, 0x16, 0xbb, 0x78, 0x42, 0x6a, 0x71,
+-      0x46, 0x0a, 0x0e, 0xca, 0x77, 0x39, 0xf9, 0xae, 0xf8, 0xd8, 0x00, 0x63,
+-      0x5b, 0x07, 0xed, 0xe7, 0x14, 0xe3, 0x0c, 0xce, 0x2d, 0x6c, 0x9a, 0xef,
+-      0x30, 0xee, 0x1a, 0x42, 0x83, 0x7a, 0x02, 0x6b, 0xc8, 0x59, 0xc9, 0x67,
+-      0xc6, 0x9a, 0xb1, 0xd3, 0x8a, 0x9b, 0x7c, 0xea, 0x0a, 0x65, 0x21, 0xd7,
+-      0xdf, 0x8c, 0xee, 0x43, 0xb5, 0xe4, 0x35, 0xa6, 0xb9, 0x5a, 0xff, 0x73,
+-      0x54, 0x0e, 0x74, 0x77, 0x56, 0x52, 0x1e, 0x9f, 0x86, 0x8c, 0x0e, 0x62,
+-      0xfa, 0x86, 0x13, 0x4a, 0xc3, 0xda, 0x98, 0xf2, 0x6d, 0xee, 0x87, 0xe4,
+-      0x41, 0x3c, 0x8c, 0xc7, 0x57, 0xd3, 0x9f, 0xfd, 0x0f, 0xec, 0x50, 0x95,
+-      0x25, 0xb6, 0xb0, 0xf0, 0x41, 0xf8, 0xd5, 0xb0, 0x76, 0xea, 0xa2, 0x7d,
+-      0x33, 0xbd, 0x4f, 0x23, 0xef, 0x89, 0x5f, 0x97, 0xb6, 0x72, 0xb6, 0xbe,
+-      0x13, 0xc7, 0xd3, 0xd4, 0xeb, 0x68, 0x2f, 0x4e, 0xa4, 0x65, 0x4c, 0xe1,
+-      0x53, 0x01, 0xc4, 0x06, 0xec, 0x18, 0xd5, 0x7d, 0x91, 0x72, 0xca, 0xa5,
+-      0x38, 0xe4, 0x8d, 0xac, 0x51, 0x02, 0xe4, 0x6d, 0x69, 0x9c, 0xd9, 0xed,
+-      0x6d, 0xaf, 0x67, 0x8c, 0x18, 0x1d, 0x83, 0xfa, 0xcc, 0xe2, 0x34, 0x4e,
+-      0x0f, 0x3f, 0x04, 0xcf, 0x2c, 0xaf, 0x67, 0xb9, 0xd2, 0x82, 0xad, 0x63,
+-      0xff, 0x51, 0x2e, 0xc9, 0xc3, 0xb1, 0x5b, 0x60, 0x50, 0xf6, 0xdb, 0xd1,
+-      0x3f, 0x57, 0x6c, 0xbe, 0x67, 0xac, 0x14, 0xf3, 0xe8, 0x8f, 0x5e, 0xb2,
+-      0xfc, 0x6c, 0xd6, 0x8e, 0x6a, 0xb4, 0x8f, 0xcc, 0xc7, 0x72, 0x3e, 0xfc,
+-      0xab, 0xe5, 0xf5, 0x77, 0x66, 0x44, 0x15, 0x79, 0xc9, 0x73, 0x35, 0x28,
+-      0x62, 0x3f, 0x3b, 0x72, 0xfe, 0xba, 0x42, 0xfb, 0xbf, 0xe6, 0x43, 0x56,
+-      0x1f, 0x4f, 0xcd, 0x95, 0xa0, 0x60, 0x9b, 0x15, 0xd3, 0xcb, 0xba, 0x75,
+-      0x7c, 0x16, 0x95, 0x9c, 0x86, 0x8a, 0x13, 0xba, 0xe0, 0x48, 0x0b, 0x6d,
+-      0xd5, 0x89, 0x0d, 0x41, 0x9a, 0xa3, 0x95, 0xcf, 0x9f, 0xc4, 0xce, 0xe4,
+-      0xbf, 0x9b, 0xcf, 0x51, 0x8f, 0x56, 0x92, 0xc3, 0x78, 0x88, 0x03, 0x4f,
+-      0x85, 0x56, 0x93, 0x73, 0x72, 0xcd, 0x09, 0x07, 0x31, 0x48, 0x41, 0xa2,
+-      0x89, 0xf6, 0x1f, 0x5a, 0x80, 0x09, 0xab, 0x7d, 0xd5, 0xdc, 0x6c, 0x0e,
+-      0xf1, 0x83, 0xb9, 0xd9, 0x38, 0x50, 0xe4, 0xff, 0x9f, 0x91, 0xdf, 0x2b,
+-      0xa6, 0xa7, 0x52, 0xe4, 0xe7, 0x80, 0x9b, 0x7e, 0x6b, 0x1f, 0xdb, 0x9c,
+-      0xdb, 0xed, 0x40, 0xbf, 0xd6, 0x82, 0xfe, 0x31, 0x78, 0x3e, 0x65, 0x9b,
+-      0x7f, 0x1a, 0x1e, 0x98, 0x9b, 0xe5, 0x0a, 0x6f, 0xa1, 0x3b, 0xfa, 0xbc,
+-      0xb9, 0xac, 0x52, 0xd6, 0xeb, 0x84, 0x9b, 0xeb, 0xdd, 0x77, 0x3d, 0x9f,
+-      0xb7, 0xde, 0x7c, 0xd8, 0xf2, 0x13, 0xbb, 0xe7, 0x4a, 0xbd, 0xec, 0xa7,
+-      0x09, 0x13, 0x97, 0xf4, 0xa3, 0x56, 0x1c, 0x2e, 0xd8, 0xd0, 0x93, 0x90,
+-      0xbd, 0x95, 0xb9, 0x6d, 0xcd, 0xc9, 0xe3, 0xff, 0x54, 0xdf, 0x3c, 0xef,
+-      0x65, 0x39, 0x5d, 0x96, 0x5a, 0x75, 0x9e, 0xe3, 0x8b, 0x2e, 0x8b, 0x1e,
+-      0x5b, 0xef, 0xfd, 0x24, 0xe5, 0xfd, 0xd9, 0x27, 0xd4, 0xdf, 0x73, 0x0c,
+-      0xc9, 0xa9, 0xb4, 0xb0, 0x0f, 0xd3, 0x5c, 0xaf, 0x37, 0x78, 0x4e, 0xe0,
+-      0x8f, 0xa8, 0xdb, 0x3a, 0xb6, 0x0f, 0x48, 0xbe, 0xd5, 0xa3, 0x38, 0xf6,
+-      0xac, 0xc1, 0x25, 0xfa, 0xff, 0x9d, 0x96, 0x1e, 0x0a, 0xae, 0xc8, 0x3c,
+-      0x04, 0x5b, 0xda, 0xe8, 0xc7, 0xad, 0xb3, 0x2e, 0x91, 0x9a, 0x70, 0xa7,
+-      0xf2, 0x61, 0x7d, 0x27, 0x8e, 0x86, 0x0c, 0xb3, 0x5c, 0xf3, 0xaf, 0x65,
+-      0xd0, 0x5f, 0x34, 0xd6, 0x58, 0x88, 0xf1, 0x90, 0xf0, 0x47, 0xb8, 0xd2,
+-      0x69, 0xaf, 0x31, 0xc3, 0xae, 0xba, 0x5e, 0x4e, 0xe7, 0xb0, 0xd2, 0xf6,
+-      0xc0, 0x5c, 0x89, 0x97, 0x92, 0x16, 0x8e, 0x7c, 0x1d, 0xf7, 0x59, 0x7b,
+-      0xab, 0xd2, 0x87, 0x4a, 0xbe, 0xf7, 0x68, 0xe8, 0x4a, 0x54, 0x30, 0xc5,
+-      0x5c, 0xd2, 0x1c, 0x6a, 0x50, 0xb7, 0xe3, 0x4e, 0x62, 0xd7, 0x12, 0x9c,
+-      0xd1, 0xa5, 0xae, 0x61, 0x7c, 0xdb, 0x01, 0xa9, 0xc1, 0x1d, 0x0e, 0x6d,
+-      0x8d, 0x2e, 0xc5, 0xbe, 0x01, 0x43, 0x71, 0x86, 0xbd, 0x91, 0x18, 0xb9,
+-      0x10, 0xe3, 0x71, 0x2b, 0xdf, 0x27, 0xf9, 0x84, 0xc1, 0xc6, 0x4e, 0x6c,
+-      0xd7, 0x0b, 0xd1, 0xa3, 0x47, 0x8a, 0xb6, 0x2c, 0xee, 0xc2, 0x7e, 0xbd,
+-      0xd4, 0x98, 0x17, 0x36, 0x88, 0xe9, 0xda, 0x86, 0x24, 0xfc, 0x2d, 0x17,
+-      0xc9, 0x39, 0x8e, 0xc3, 0xdb, 0xb1, 0xc4, 0x4e, 0xcc, 0xbd, 0xc7, 0xe1,
+-      0x8a, 0x65, 0x9a, 0x90, 0x18, 0xab, 0x72, 0xed, 0xc8, 0x04, 0x11, 0x1f,
+-      0xe3, 0x7e, 0x33, 0xae, 0x75, 0x64, 0x96, 0x92, 0x83, 0x8a, 0x1c, 0xed,
+-      0xd4, 0xc5, 0x7a, 0x3c, 0xd3, 0x7a, 0xc1, 0x7c, 0xd2, 0x2f, 0xf8, 0x59,
+-      0x8b, 0x67, 0x55, 0x9f, 0xc5, 0x29, 0x23, 0xb6, 0xaf, 0xb2, 0x0f, 0x3b,
+-      0x75, 0xee, 0x55, 0xd3, 0xf3, 0xa8, 0xc8, 0x8d, 0xc1, 0x56, 0xf1, 0x6a,
+-      0xe2, 0xa7, 0xfc, 0x2d, 0xb2, 0x13, 0x19, 0x9a, 0x58, 0xa7, 0x4b, 0x2e,
+-      0xaf, 0x91, 0x36, 0xe3, 0xc6, 0xdb, 0xea, 0x8d, 0x7d, 0x78, 0x5a, 0xf7,
+-      0xe9, 0x87, 0x20, 0x39, 0xbc, 0xff, 0xce, 0xe7, 0x24, 0xdf, 0xd2, 0x84,
+-      0x17, 0x2b, 0xb2, 0xf1, 0x87, 0xc7, 0x56, 0x42, 0xdc, 0xcd, 0xfb, 0x11,
+-      0xb9, 0xef, 0x4d, 0x46, 0xa8, 0xa7, 0x1b, 0x83, 0x53, 0x66, 0xa4, 0xd2,
+-      0xe8, 0x94, 0xb3, 0x28, 0xee, 0xf0, 0xea, 0x17, 0xdd, 0xf5, 0xde, 0x8e,
+-      0x29, 0x05, 0x38, 0x13, 0xa3, 0x1f, 0xb6, 0xfe, 0xbb, 0x47, 0xe9, 0xdb,
+-      0x89, 0xa1, 0xe0, 0x1d, 0x68, 0x6f, 0x93, 0xb1, 0x9a, 0xd1, 0xbb, 0xd7,
+-      0x34, 0x4b, 0x43, 0x3e, 0x35, 0x0d, 0x27, 0x56, 0x04, 0xed, 0xb8, 0xa0,
+-      0x9a, 0x70, 0x84, 0xfe, 0xdd, 0xcc, 0xd0, 0x3f, 0x0e, 0xd3, 0x4e, 0x76,
+-      0x50, 0xc7, 0xe4, 0x5d, 0x28, 0x3f, 0xed, 0x24, 0x4e, 0x3b, 0x39, 0x13,
+-      0x9a, 0x9f, 0x7b, 0x57, 0x52, 0x23, 0xaf, 0x98, 0xc4, 0x92, 0x01, 0x15,
+-      0x9f, 0xde, 0x33, 0x89, 0xd0, 0x50, 0x7e, 0xee, 0x62, 0x97, 0xf9, 0xf9,
+-      0x4b, 0x6d, 0x50, 0xe6, 0x2e, 0x73, 0x94, 0xb5, 0xc8, 0xdf, 0xf9, 0x7b,
+-      0xf9, 0xdf, 0xc4, 0xcf, 0x3a, 0xd1, 0x6a, 0xad, 0xed, 0x2f, 0x6a, 0xb2,
+-      0x98, 0x91, 0x5f, 0x93, 0xeb, 0x96, 0xeb, 0x4b, 0xb7, 0x5c, 0x3f, 0xee,
+-      0xbe, 0xf9, 0x7a, 0xfb, 0x9c, 0x9b, 0xaf, 0xf3, 0x36, 0x71, 0x43, 0xae,
+-      0x1d, 0xba, 0x6f, 0xe2, 0x28, 0xd7, 0x3a, 0x63, 0xc1, 0x21, 0xf3, 0x42,
+-      0x85, 0xcc, 0x45, 0x62, 0xd6, 0xec, 0x5c, 0x97, 0x65, 0xa6, 0xcf, 0xf5,
+-      0xcd, 0x5c, 0x6d, 0xc0, 0x3a, 0xf7, 0x4b, 0xbb, 0xd1, 0xe4, 0x1d, 0xdf,
+-      0xdc, 0x3b, 0x74, 0xd9, 0xb3, 0x88, 0xa5, 0xe1, 0x80, 0xd2, 0x1b, 0x33,
+-      0xcc, 0x19, 0x5a, 0xb1, 0x21, 0xef, 0x4a, 0xa9, 0x7e, 0x03, 0x25, 0x7e,
+-      0x6d, 0xc3, 0x0c, 0x5b, 0x17, 0x9c, 0x0b, 0xb5, 0x8e, 0x3f, 0x53, 0x92,
+-      0x88, 0x67, 0xbc, 0x81, 0x43, 0x94, 0x55, 0x2c, 0x73, 0x95, 0x71, 0x75,
+-      0x17, 0x9e, 0x09, 0x39, 0x8c, 0xe2, 0xb0, 0xd7, 0x3d, 0x5f, 0x59, 0x86,
+-      0xed, 0x43, 0x7f, 0x8e, 0xf5, 0x49, 0xe1, 0xf8, 0xb5, 0xd8, 0x32, 0x66,
+-      0xc3, 0x31, 0xea, 0x77, 0x2f, 0xc7, 0x21, 0xfe, 0xb9, 0x53, 0x90, 0xb3,
+-      0x79, 0x8d, 0x8c, 0x91, 0x75, 0xeb, 0xb3, 0x75, 0xe8, 0x75, 0xac, 0x8f,
+-      0x9a, 0xf8, 0x54, 0xa7, 0xef, 0xd1, 0x64, 0x7e, 0x12, 0x3b, 0xb7, 0x5a,
+-      0x58, 0xfa, 0x48, 0x9c, 0xfb, 0x39, 0x4b, 0x6c, 0x75, 0x29, 0x6d, 0x56,
+-      0xc1, 0x67, 0x52, 0x77, 0xac, 0xe4, 0x9c, 0xc9, 0x0d, 0xc7, 0xa3, 0x9b,
+-      0x30, 0x1c, 0x35, 0xe4, 0x7d, 0xc0, 0xde, 0x1a, 0x7b, 0xe4, 0x85, 0x0a,
+-      0xf2, 0xec, 0x84, 0xee, 0x6f, 0x3f, 0xa7, 0xc0, 0x53, 0x16, 0xf6, 0xd3,
+-      0xcf, 0x7c, 0x89, 0xdf, 0xea, 0x92, 0x4f, 0xd3, 0x5d, 0xab, 0xa8, 0xef,
+-      0x7b, 0x86, 0x02, 0x56, 0x7e, 0xe0, 0xef, 0x6e, 0x9b, 0xbf, 0x90, 0x1a,
+-      0xb3, 0x9e, 0xcb, 0x35, 0xbe, 0x8e, 0x83, 0x69, 0x17, 0x1e, 0x8b, 0x7b,
+-      0x94, 0x79, 0x7b, 0x54, 0xdc, 0x1f, 0xf7, 0x4e, 0x2c, 0xb1, 0x93, 0x7f,
+-      0x2c, 0x9a, 0xc1, 0xfe, 0x14, 0xfc, 0x68, 0xa1, 0xf8, 0x82, 0xff, 0x0a,
+-      0x63, 0x56, 0x84, 0x7d, 0xa2, 0xb4, 0x60, 0xb1, 0x57, 0x3d, 0x68, 0xf3,
+-      0xb9, 0x7f, 0x8b, 0xad, 0xb0, 0x67, 0x56, 0xa3, 0x9b, 0xf3, 0x5f, 0x19,
+-      0x97, 0x9a, 0x55, 0x03, 0x50, 0xd1, 0x8c, 0x1d, 0x87, 0xc4, 0x36, 0xe5,
+-      0x9d, 0x75, 0x78, 0xaa, 0xc2, 0x2d, 0x77, 0xa0, 0xf8, 0x4b, 0x72, 0xed,
+-      0x49, 0x89, 0x3f, 0x37, 0x94, 0xdb, 0x4c, 0xc6, 0x2f, 0xf3, 0x73, 0x35,
+-      0x89, 0xa5, 0xd8, 0x3a, 0x20, 0xf9, 0x76, 0xe2, 0xb6, 0xce, 0x38, 0xa8,
+-      0x42, 0x0b, 0x3c, 0x65, 0x93, 0x3a, 0xd0, 0x26, 0xf8, 0x62, 0x9b, 0x10,
+-      0x88, 0x89, 0xcd, 0x6a, 0x6a, 0x07, 0x22, 0xa7, 0x25, 0xcf, 0x37, 0x2f,
+-      0xe4, 0xe7, 0xbc, 0xfc, 0xbd, 0x55, 0x76, 0xdd, 0xf5, 0xca, 0xa8, 0x8a,
+-      0x09, 0x35, 0x1b, 0x47, 0x1e, 0x4a, 0x6a, 0x6b, 0x0b, 0x6d, 0x72, 0x26,
+-      0xe2, 0xb2, 0x19, 0xb1, 0xfa, 0x55, 0x6a, 0x51, 0xde, 0x8c, 0xbe, 0xbd,
+-      0xef, 0xd2, 0x07, 0xc9, 0x18, 0xbf, 0x37, 0x9d, 0xd4, 0xcb, 0xe5, 0x6d,
+-      0x1e, 0xdc, 0x17, 0x97, 0x3c, 0x69, 0x4f, 0x75, 0xf6, 0x4c, 0x87, 0x5c,
+-      0x3b, 0xd0, 0xa1, 0x13, 0x64, 0x67, 0x7d, 0x61, 0x56, 0x59, 0x71, 0xe9,
+-      0x97, 0x59, 0x9d, 0x49, 0xdc, 0x7d, 0x87, 0xd8, 0x78, 0xcf, 0x58, 0x83,
+-      0x3b, 0xab, 0x77, 0x4d, 0xbc, 0x96, 0xbe, 0xb4, 0x7d, 0x9b, 0xe4, 0x34,
+-      0x2e, 0xf9, 0xcc, 0x23, 0xa3, 0xd3, 0xdb, 0xe7, 0x73, 0x30, 0x55, 0x39,
+-      0x4e, 0x95, 0xd7, 0x37, 0xa9, 0xf5, 0x45, 0x94, 0x87, 0xa3, 0x2d, 0xca,
+-      0xaa, 0xa8, 0xd4, 0xfb, 0x6c, 0xd1, 0x12, 0xeb, 0x5c, 0xab, 0x89, 0xef,
+-      0x85, 0xc6, 0x95, 0x6d, 0xd6, 0x99, 0x59, 0x43, 0x49, 0x36, 0x02, 0x95,
+-      0xa3, 0xcd, 0xca, 0xf6, 0xe8, 0x27, 0xe6, 0x53, 0x56, 0x5d, 0x7d, 0xa6,
+-      0x75, 0xbe, 0xa6, 0x70, 0xd4, 0x85, 0x8a, 0x83, 0x25, 0x28, 0x18, 0xd4,
+-      0x30, 0x73, 0xf4, 0x41, 0xf2, 0x56, 0xe1, 0x3a, 0x46, 0x8b, 0xc3, 0x3a,
+-      0xa3, 0xf6, 0xfa, 0xf5, 0x33, 0x6a, 0x0e, 0xe2, 0x82, 0x01, 0xeb, 0x1f,
+-      0x63, 0xa5, 0xc3, 0x8c, 0x95, 0xcc, 0x25, 0xdf, 0x0b, 0x19, 0x3b, 0x66,
+-      0xc2, 0x1b, 0xa8, 0xb4, 0x19, 0xa6, 0xe4, 0x6e, 0x5e, 0x21, 0x61, 0x5c,
+-      0x53, 0x67, 0x60, 0x45, 0x9d, 0xbc, 0x9b, 0xe9, 0x30, 0xec, 0xe1, 0x2e,
+-      0x1c, 0x0e, 0x75, 0xe1, 0x3d, 0xbd, 0x0b, 0x3b, 0xf5, 0x62, 0xa3, 0x3c,
+-      0x5c, 0x2a, 0x67, 0xd9, 0x27, 0xa2, 0xd0, 0xf4, 0xb4, 0xa2, 0x9d, 0xba,
+-      0x0a, 0xef, 0x3e, 0x9f, 0xe2, 0x35, 0x96, 0x29, 0x1a, 0x2e, 0x67, 0xbc,
+-      0x53, 0xe5, 0xb4, 0x81, 0x6b, 0x99, 0x00, 0xa6, 0x88, 0xab, 0xc9, 0x31,
+-      0x39, 0x4f, 0x52, 0x8b, 0x81, 0xb1, 0xff, 0x29, 0xdc, 0xc0, 0x20, 0x26,
+-      0x59, 0x67, 0x2a, 0x9f, 0x93, 0x5a, 0xa6, 0x33, 0x98, 0xe3, 0x30, 0x86,
+-      0xb2, 0xae, 0xb1, 0x0c, 0xd7, 0xe8, 0x9d, 0x7e, 0x98, 0xee, 0x64, 0x3c,
+-      0x87, 0xd7, 0x6a, 0x60, 0xff, 0xbe, 0x1b, 0xf5, 0xc9, 0x19, 0x38, 0x56,
+-      0x5f, 0x89, 0x02, 0x1c, 0x1d, 0xee, 0x20, 0xc7, 0xef, 0x6e, 0x2f, 0x67,
+-      0x7c, 0x3a, 0x3a, 0xec, 0x44, 0x2a, 0x25, 0x39, 0x07, 0xab, 0x36, 0x39,
+-      0xe9, 0xa0, 0x2d, 0xed, 0x4a, 0xa0, 0xbe, 0x26, 0xec, 0x4f, 0xd6, 0xd8,
+-      0x55, 0xf6, 0x51, 0x85, 0x54, 0x5a, 0xe3, 0x27, 0xc0, 0x4f, 0x90, 0x9f,
+-      0x26, 0x7c, 0x8f, 0x36, 0x5b, 0x41, 0xbc, 0x7d, 0x35, 0x5d, 0x86, 0x4f,
+-      0x92, 0x5a, 0x40, 0xa7, 0x1e, 0x0c, 0x33, 0x46, 0x30, 0x2c, 0x39, 0x95,
+-      0xe1, 0x2a, 0xed, 0xf4, 0xa5, 0x50, 0x19, 0xcc, 0xd4, 0xed, 0x62, 0x42,
+-      0x79, 0xff, 0x25, 0x7f, 0x0e, 0x33, 0x5b, 0x5f, 0x3d, 0x92, 0x81, 0xf2,
+-      0x78, 0x9d, 0x41, 0x7d, 0x61, 0x0c, 0xbb, 0x48, 0x6a, 0x29, 0x5a, 0xe7,
+-      0x25, 0x7b, 0xb1, 0x51, 0x13, 0xf6, 0x7a, 0x6a, 0xec, 0x1a, 0xce, 0xa5,
+-      0x27, 0x11, 0x4f, 0xca, 0xbb, 0x6d, 0xa2, 0xc7, 0xef, 0x9b, 0x46, 0x85,
+-      0x9c, 0xc9, 0xe8, 0x44, 0x5c, 0xab, 0x64, 0x1c, 0x24, 0xef, 0x3e, 0x1e,
+-      0x0e, 0x45, 0x63, 0xa5, 0xf2, 0x9e, 0xf0, 0x92, 0x97, 0x43, 0xde, 0x96,
+-      0x7e, 0xc5, 0x78, 0xa8, 0xc4, 0x7a, 0xaf, 0xa3, 0x8b, 0x58, 0xac, 0xa9,
+-      0x4e, 0xc5, 0xdb, 0xb4, 0x05, 0x01, 0x1c, 0x4b, 0x8b, 0xdc, 0x28, 0xa7,
+-      0xb1, 0xac, 0xdc, 0x6e, 0x9c, 0x9d, 0xce, 0xea, 0xc1, 0xc6, 0xa8, 0x83,
+-      0xdf, 0xb2, 0xf7, 0x72, 0xae, 0x95, 0x3e, 0xc2, 0xda, 0xff, 0x9f, 0xdf,
+-      0x91, 0x3b, 0xbf, 0xda, 0x5e, 0x19, 0x76, 0x05, 0x97, 0xc7, 0xed, 0x9f,
+-      0xc8, 0xfb, 0xc8, 0x4f, 0x34, 0xca, 0x7b, 0x6b, 0xae, 0xe0, 0xe3, 0xa3,
+-      0xae, 0xe0, 0xda, 0xf8, 0x51, 0x85, 0xf2, 0xda, 0x57, 0x63, 0x77, 0x05,
+-      0x1f, 0xb9, 0xd1, 0x9e, 0xfb, 0xde, 0x85, 0xb1, 0x50, 0xb1, 0xa1, 0x86,
+-      0xc5, 0xa7, 0x7b, 0x03, 0x9f, 0x28, 0x96, 0x2f, 0x37, 0x4a, 0xe8, 0x63,
+-      0x9f, 0xcf, 0x8c, 0x9b, 0xed, 0xb3, 0x04, 0xab, 0xec, 0x1c, 0xeb, 0x2a,
+-      0x5e, 0x49, 0xdd, 0x78, 0xae, 0x85, 0xcf, 0x15, 0xf3, 0xb9, 0x92, 0xb0,
+-      0xc4, 0x8d, 0x5e, 0x7d, 0x95, 0xa2, 0x79, 0x8a, 0x14, 0xa9, 0x87, 0x69,
+-      0xf8, 0x55, 0xfa, 0x9f, 0xef, 0x90, 0x78, 0xb7, 0x67, 0xac, 0x12, 0x6b,
+-      0x76, 0x9b, 0x4b, 0xe6, 0x2d, 0x34, 0x97, 0xa4, 0x43, 0x31, 0xf3, 0xa5,
+-      0x6a, 0xd9, 0x4f, 0xa9, 0xf1, 0xc9, 0x33, 0x9a, 0xea, 0x63, 0x9c, 0xf9,
+-      0x4d, 0x7d, 0xbb, 0xbc, 0xa3, 0x07, 0x79, 0x7f, 0xa9, 0x90, 0x63, 0x9c,
+-      0x4c, 0x89, 0x8e, 0x6c, 0x6d, 0x77, 0x31, 0x16, 0x95, 0x77, 0x67, 0x0f,
+-      0x73, 0xef, 0x0f, 0xa6, 0xfe, 0xd7, 0x1d, 0x72, 0x76, 0x5d, 0xce, 0x06,
+-      0x00, 0xff, 0x1f, 0x17, 0x23, 0xca, 0x76, 0xf8, 0x78, 0x00, 0x00, 0x00 };
++      0xec, 0x5c, 0x7f, 0x70, 0x1c, 0xd5, 0x7d, 0xff, 0xbc, 0xbd, 0xbd, 0xbb,
++      0x95, 0x74, 0x3e, 0xed, 0x9d, 0x4e, 0xb2, 0x04, 0x06, 0xef, 0xa2, 0x95,
++      0x74, 0x58, 0xc6, 0xec, 0x9d, 0x4e, 0xb6, 0x48, 0xb7, 0xc9, 0xd5, 0x36,
++      0x20, 0x17, 0x52, 0x84, 0xa1, 0xc1, 0xcc, 0x30, 0x9d, 0x1b, 0x63, 0x8c,
++      0xb0, 0x1d, 0xa2, 0x00, 0x33, 0xc8, 0x29, 0x13, 0x16, 0xfc, 0xb3, 0xf8,
++      0xa4, 0x93, 0x8d, 0x8c, 0xc9, 0xf4, 0xd7, 0x21, 0xcb, 0x8a, 0x81, 0x93,
++      0xce, 0x04, 0xda, 0x98, 0x69, 0xa8, 0x15, 0x6c, 0x53, 0x87, 0x5f, 0x21,
++      0x19, 0x68, 0x4d, 0x9b, 0x99, 0xa8, 0x06, 0x1c, 0xd3, 0xa6, 0xd4, 0xb4,
++      0x0e, 0xb5, 0x8b, 0xeb, 0xd7, 0xef, 0x77, 0x4f, 0x97, 0x50, 0x42, 0xcb,
++      0x64, 0xa6, 0x7f, 0xee, 0x77, 0xe6, 0xe6, 0xf6, 0xde, 0xfb, 0xbe, 0xef,
++      0x7b, 0xdf, 0xdf, 0x9f, 0xb7, 0x1a, 0xfb, 0xbe, 0x08, 0x6a, 0x31, 0x4b,
++      0x73, 0xe8, 0x93, 0x19, 0x18, 0xbc, 0x27, 0xbd, 0x28, 0xb3, 0x88, 0x1e,
++      0xbb, 0x02, 0x73, 0x55, 0x95, 0xc7, 0x05, 0x7c, 0xf2, 0xc9, 0x27, 0x9f,
++      0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2,
++      0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27,
++      0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c,
++      0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xf2, 0xc9,
++      0x27, 0x9f, 0x7c, 0xf2, 0xc9, 0x27, 0x9f, 0x7c, 0xfa, 0xff, 0xa4, 0x00,
++      0xa0, 0xf3, 0xf7, 0x9c, 0xd9, 0x0f, 0x34, 0xc5, 0x71, 0x37, 0x2e, 0xb5,
++      0xa0, 0x05, 0x9c, 0x33, 0x1b, 0x6f, 0xb7, 0x80, 0x6c, 0xa9, 0xd3, 0x58,
++      0x86, 0xff, 0x92, 0x6e, 0x42, 0x05, 0x8f, 0x5f, 0xe2, 0x9c, 0xff, 0xf3,
++      0x17, 0x96, 0x98, 0xa7, 0x8b, 0x01, 0x68, 0xba, 0xf3, 0x46, 0x4a, 0x6f,
++      0x87, 0x36, 0x8f, 0xd6, 0xfc, 0x49, 0xc7, 0x95, 0x71, 0x44, 0xab, 0xb2,
++      0xe0, 0x2a, 0x8e, 0x94, 0xfb, 0x6c, 0x89, 0x97, 0x6c, 0x57, 0xf4, 0x66,
++      0xe0, 0x06, 0x9c, 0x83, 0xe2, 0xae, 0xfc, 0x05, 0x69, 0x04, 0x2b, 0x3b,
++      0xab, 0x93, 0x1a, 0x82, 0xfb, 0xa0, 0xab, 0x8e, 0x82, 0xa0, 0x55, 0x8b,
++      0xd0, 0x13, 0x75, 0x08, 0x3e, 0xd1, 0x8c, 0xf0, 0xe4, 0x01, 0x91, 0x2b,
++      0x6a, 0x98, 0x09, 0x1c, 0x14, 0x6b, 0x4a, 0xc8, 0x05, 0x9d, 0xb3, 0x37,
++      0x8c, 0xd1, 0xba, 0xac, 0xf7, 0xef, 0x4b, 0xa6, 0x6f, 0x18, 0x2f, 0x41,
++      0x0f, 0x38, 0x50, 0x54, 0xe7, 0x08, 0x3d, 0x33, 0xdf, 0xd9, 0x1b, 0xf6,
++      0x96, 0x4e, 0xc9, 0x17, 0x3a, 0x12, 0x38, 0x54, 0xd6, 0x71, 0xa0, 0xfc,
++      0x10, 0x9d, 0xc3, 0x74, 0x5d, 0x68, 0xae, 0xea, 0xb8, 0xd8, 0x92, 0x09,
++      0x62, 0x62, 0xe4, 0x82, 0x0c, 0x58, 0xa6, 0x01, 0xc5, 0xd2, 0x0f, 0x83,
++      0xf8, 0x0a, 0xc4, 0x57, 0x08, 0x62, 0xac, 0xb8, 0x23, 0x8e, 0xda, 0x66,
++      0xbc, 0xd0, 0xc1, 0xeb, 0x79, 0x2d, 0xcb, 0xf8, 0x38, 0x5a, 0x5d, 0x1f,
++      0xa2, 0xf5, 0x47, 0x33, 0xc0, 0xf8, 0x48, 0x1f, 0x2d, 0x95, 0xd8, 0x64,
++      0x87, 0xb1, 0x5a, 0x87, 0x5b, 0xe3, 0xb0, 0xac, 0xaa, 0x1c, 0x57, 0x18,
++      0x93, 0xff, 0x5c, 0x5f, 0x91, 0x03, 0xa1, 0x59, 0x70, 0xc3, 0x9f, 0x9a,
++      0x3f, 0x55, 0xaa, 0xce, 0x6f, 0xa7, 0x7d, 0x34, 0x9a, 0xef, 0xc7, 0x5f,
++      0x96, 0xd7, 0xe0, 0x2f, 0xca, 0xb7, 0xe1, 0xd9, 0x72, 0x1f, 0xed, 0x7b,
++      0x1f, 0xed, 0x3b, 0x80, 0xbf, 0x2e, 0x6f, 0xc0, 0x77, 0xcb, 0x39, 0x3c,
++      0x57, 0x5e, 0x85, 0xef, 0x94, 0x6f, 0xc6, 0x33, 0x65, 0x78, 0x67, 0x38,
++      0x95, 0x49, 0x8a, 0x1f, 0xe5, 0x6b, 0xa0, 0xee, 0xdc, 0x8c, 0xe9, 0x52,
++      0x10, 0xc1, 0x9d, 0x12, 0x23, 0xb6, 0xf9, 0x38, 0xd0, 0xa1, 0x07, 0x21,
++      0xb0, 0xcc, 0x36, 0xf7, 0x03, 0x5f, 0x40, 0x2e, 0x61, 0x1e, 0x00, 0x9a,
++      0xc4, 0x8f, 0x47, 0x9b, 0xc4, 0x6b, 0xa3, 0xaa, 0x78, 0x3d, 0x2f, 0x50,
++      0xef, 0x20, 0xf2, 0x72, 0x46, 0xca, 0xeb, 0xd2, 0x52, 0x96, 0x52, 0x56,
++      0xef, 0x0f, 0x85, 0x69, 0x3f, 0x22, 0x2e, 0x85, 0xd1, 0x68, 0x66, 0xd7,
++      0x09, 0xcd, 0xad, 0x25, 0xf9, 0x2b, 0xba, 0x01, 0x6b, 0xa7, 0x41, 0x7e,
++      0x60, 0x1d, 0x37, 0xe1, 0x0e, 0x2f, 0x26, 0xfa, 0xd0, 0x60, 0x2d, 0xc5,
++      0xbd, 0x7d, 0x36, 0x8a, 0x65, 0x68, 0x31, 0xe7, 0x0c, 0x52, 0xc3, 0x02,
++      0x36, 0xf9, 0x5b, 0xd0, 0xb3, 0x5d, 0x5a, 0xdf, 0x50, 0xf1, 0x37, 0x9d,
++      0xbd, 0x40, 0x67, 0x2f, 0xd0, 0xd9, 0x0b, 0xa4, 0x57, 0x81, 0xf4, 0x2a,
++      0x90, 0x0e, 0x05, 0xd2, 0xad, 0x40, 0x7a, 0x14, 0x48, 0x8f, 0x02, 0xe9,
++      0x58, 0x60, 0x5f, 0x0d, 0x92, 0x0d, 0x22, 0xf8, 0xbb, 0xfc, 0x3c, 0x9c,
++      0xe1, 0xcf, 0x4a, 0x1d, 0xc7, 0xe9, 0x8c, 0x8a, 0xf5, 0x9b, 0xca, 0xf8,
++      0x6e, 0x84, 0x7c, 0x64, 0xfc, 0xe6, 0x7b, 0x2f, 0xc4, 0xc9, 0xfc, 0xbb,
++      0x32, 0x34, 0x97, 0xf7, 0xfc, 0x22, 0xe4, 0x28, 0x70, 0xe9, 0x6e, 0x29,
++      0xcf, 0x75, 0xcd, 0xc8, 0xb7, 0x6f, 0x61, 0x59, 0x0e, 0x4e, 0x8c, 0x2a,
++      0x08, 0xd0, 0xd8, 0xb5, 0xf6, 0xdf, 0xcb, 0x3b, 0x13, 0xcc, 0xf7, 0x51,
++      0x04, 0xb5, 0x6c, 0x27, 0x68, 0x0d, 0xce, 0xbb, 0x1b, 0xef, 0x6d, 0x87,
++      0x1b, 0x75, 0x54, 0xf1, 0xe6, 0x90, 0x81, 0xb9, 0x4e, 0x16, 0x73, 0x1c,
++      0x6b, 0x64, 0x8f, 0xd2, 0x39, 0x18, 0x47, 0xf6, 0xf2, 0x7a, 0xd8, 0xd8,
++      0x57, 0x56, 0xc5, 0xab, 0x43, 0x73, 0x10, 0xdf, 0x69, 0xad, 0x1a, 0x12,
++      0x0a, 0x72, 0x8d, 0x59, 0x8c, 0x67, 0x4c, 0xa3, 0x08, 0x03, 0xab, 0xd2,
++      0x0a, 0x30, 0xd7, 0xc5, 0xd6, 0x8c, 0x69, 0xbb, 0x78, 0x08, 0xd3, 0x09,
++      0x1b, 0x13, 0x65, 0x8d, 0x72, 0xc3, 0xc5, 0x9d, 0x19, 0x0d, 0x72, 0x24,
++      0x8b, 0x93, 0x5d, 0x21, 0x4c, 0xf7, 0x71, 0x8c, 0xa8, 0xb4, 0xf7, 0x56,
++      0x28, 0xf1, 0x38, 0xf9, 0xe5, 0xb0, 0x0c, 0xc6, 0x79, 0x0c, 0xe2, 0x5f,
++      0x32, 0xbc, 0xff, 0x45, 0xe2, 0xd5, 0xdd, 0x51, 0xd4, 0xee, 0xd6, 0xf0,
++      0xf4, 0x4e, 0x15, 0x2b, 0xc8, 0xb7, 0x7b, 0x52, 0xaa, 0xb1, 0x4e, 0x38,
++      0x18, 0x2f, 0xab, 0x48, 0x0c, 0xb5, 0xc0, 0x88, 0x69, 0xb8, 0x74, 0xc8,
++      0xc5, 0x3b, 0x24, 0x77, 0x90, 0xe4, 0xd6, 0x77, 0xe9, 0x98, 0x69, 0xac,
++      0xf8, 0xf5, 0xeb, 0xf9, 0x56, 0x77, 0xa7, 0x12, 0x02, 0x42, 0x70, 0x35,
++      0x27, 0x83, 0xfb, 0xf3, 0xad, 0xa4, 0xc3, 0xad, 0x58, 0x1a, 0xd2, 0xb0,
++      0x7a, 0x98, 0xc7, 0x96, 0x03, 0x93, 0x73, 0xe7, 0xa0, 0x96, 0xf5, 0xe7,
++      0x7c, 0x5e, 0x4a, 0xcf, 0x1c, 0x07, 0xbf, 0x9d, 0x60, 0xbb, 0xbb, 0xca,
++      0x7f, 0xc8, 0x6c, 0x82, 0xf9, 0x2a, 0x39, 0x72, 0x38, 0x93, 0xc1, 0xc6,
++      0x7c, 0x6b, 0xf6, 0x5b, 0x4a, 0x03, 0x10, 0x34, 0x0d, 0x43, 0x81, 0x96,
++      0x70, 0x90, 0x1a, 0xa5, 0x78, 0x79, 0xd4, 0x8b, 0x17, 0xa4, 0xba, 0x4a,
++      0x9c, 0x97, 0x9a, 0xab, 0x13, 0xff, 0xfc, 0xc5, 0x6d, 0xf8, 0xe8, 0x51,
++      0xe6, 0x53, 0xf1, 0x03, 0x7a, 0x7e, 0x7f, 0xef, 0x8e, 0xd9, 0xda, 0xf1,
++      0xa7, 0x9e, 0x5f, 0x0d, 0xa5, 0xba, 0xb7, 0x8d, 0x3b, 0xf3, 0xad, 0x67,
++      0xb7, 0x29, 0xe4, 0xbf, 0x8b, 0x23, 0xa8, 0xa1, 0xfa, 0x13, 0x24, 0x59,
++      0xfb, 0xf2, 0xe7, 0xb1, 0x32, 0x6d, 0x1e, 0xe4, 0x7f, 0x6f, 0x36, 0x66,
++      0x55, 0xe4, 0x5f, 0x56, 0xb2, 0xf1, 0x64, 0xd9, 0xc6, 0xed, 0x74, 0x8e,
++      0xfb, 0xf0, 0x8f, 0x40, 0xcb, 0x02, 0xe3, 0x94, 0x72, 0x42, 0xba, 0x37,
++      0xb3, 0xbc, 0x79, 0x38, 0x15, 0x6f, 0xcd, 0x9d, 0x52, 0xcc, 0xe2, 0x76,
++      0x85, 0x6d, 0xa5, 0xe0, 0xcb, 0xe9, 0x0c, 0x8a, 0x31, 0x1d, 0xb7, 0xa6,
++      0x35, 0xf7, 0x52, 0x3a, 0xd3, 0x1b, 0x4b, 0x34, 0x34, 0xed, 0xca, 0xe2,
++      0xad, 0xf4, 0x9b, 0x28, 0xae, 0x64, 0x3b, 0xf0, 0x3a, 0x3e, 0x73, 0x33,
++      0xe2, 0x56, 0x0d, 0xe2, 0x63, 0x41, 0xd4, 0xef, 0xba, 0x20, 0x9b, 0x2d,
++      0x1e, 0xb7, 0x06, 0xce, 0x0a, 0x3e, 0x73, 0x10, 0xd1, 0xb1, 0xab, 0xa0,
++      0x5a, 0x66, 0x92, 0x1c, 0x9b, 0x60, 0xde, 0x90, 0x55, 0x3d, 0xbb, 0xc0,
++      0x75, 0x5f, 0x10, 0x58, 0x97, 0xfa, 0xbe, 0xcc, 0x36, 0xf2, 0x9a, 0x67,
++      0x68, 0x9c, 0xcf, 0x50, 0x73, 0x36, 0x8b, 0x26, 0x5a, 0x53, 0xe5, 0x8b,
++      0xa0, 0x7f, 0x57, 0xe5, 0x0c, 0x6f, 0x2f, 0xc1, 0xb3, 0x1a, 0x7a, 0xd0,
++      0x51, 0x78, 0x08, 0x6f, 0x2d, 0xf6, 0xf6, 0x3f, 0xbd, 0x2f, 0xbd, 0x83,
++      0x6c, 0xc2, 0x75, 0xf4, 0xd3, 0x7e, 0xe1, 0xf9, 0xff, 0x64, 0x7f, 0x24,
++      0x21, 0x9a, 0x69, 0x8c, 0xe3, 0x77, 0xa7, 0x34, 0x6e, 0xaa, 0xf8, 0x25,
++      0x4c, 0xf2, 0xde, 0xcf, 0xf4, 0xa0, 0x75, 0x48, 0x85, 0xcc, 0xb7, 0xda,
++      0x3f, 0x0d, 0x3c, 0x22, 0xa7, 0x6f, 0xe3, 0xb9, 0x56, 0xfd, 0x70, 0x40,
++      0x60, 0xa9, 0x6a, 0x9e, 0xce, 0xa1, 0x19, 0xfb, 0xa9, 0xc6, 0xb4, 0x38,
++      0x3a, 0xd5, 0x9c, 0x04, 0xd5, 0x1e, 0x43, 0x74, 0xec, 0xb1, 0xb1, 0x60,
++      0xe8, 0x36, 0x7c, 0x69, 0xb7, 0x83, 0x83, 0x05, 0x1b, 0x4f, 0x17, 0xa4,
++      0x3c, 0x69, 0x4b, 0xf9, 0xaf, 0x5d, 0x66, 0xff, 0x31, 0x6a, 0x07, 0x8b,
++      0x96, 0x74, 0xe6, 0xea, 0x03, 0x2a, 0xd9, 0xa7, 0xcd, 0xd8, 0x20, 0xcc,
++      0xe6, 0x29, 0x61, 0x53, 0xcc, 0xf5, 0x92, 0xed, 0x0d, 0xec, 0x2d, 0x27,
++      0xf1, 0x54, 0xd9, 0xa2, 0xcf, 0x42, 0x8a, 0x95, 0x0c, 0xd5, 0x33, 0xd6,
++      0x55, 0xc7, 0x78, 0x07, 0xe5, 0x45, 0x41, 0xc1, 0x7e, 0x9b, 0xe2, 0x3f,
++      0x46, 0xbc, 0x85, 0x0b, 0xe4, 0x3f, 0x0d, 0xc9, 0x9d, 0x59, 0xd4, 0xa4,
++      0x1a, 0x60, 0xdc, 0x68, 0x61, 0xbc, 0xa0, 0xb9, 0x41, 0x8a, 0xf9, 0xb1,
++      0xfc, 0x38, 0xfe, 0x40, 0x4f, 0xa0, 0x96, 0xec, 0xb7, 0x2a, 0x1d, 0x01,
++      0x6e, 0xe2, 0xb9, 0x08, 0x5a, 0xac, 0xef, 0xa3, 0x25, 0x3e, 0x07, 0xa1,
++      0x05, 0x7f, 0x85, 0x69, 0x3d, 0x8a, 0x30, 0xf5, 0x8c, 0xf9, 0xc4, 0x33,
++      0x9f, 0x7c, 0xd5, 0x68, 0x59, 0x24, 0x53, 0xc0, 0x6a, 0x23, 0x5e, 0xca,
++      0xa7, 0x66, 0xd2, 0x3d, 0xb8, 0x24, 0x81, 0x32, 0x9d, 0x7f, 0x2a, 0x2f,
++      0x65, 0x24, 0x63, 0xf6, 0x17, 0x28, 0x37, 0x27, 0x4b, 0x3d, 0x98, 0x2a,
++      0xff, 0x1e, 0xd5, 0x73, 0x1b, 0x7b, 0xf3, 0x0e, 0xc6, 0x0a, 0xea, 0xaa,
++      0x3c, 0xcc, 0xbe, 0xf5, 0xc8, 0xe0, 0x29, 0x8a, 0x9f, 0x89, 0x82, 0x69,
++      0xbc, 0x18, 0xd0, 0x70, 0xcc, 0xae, 0xa3, 0x73, 0x52, 0xde, 0x92, 0x4e,
++      0xcf, 0xe7, 0x47, 0x60, 0x35, 0xb0, 0xfd, 0xd9, 0x4f, 0x19, 0x7c, 0xbb,
++      0xe0, 0xc5, 0xf7, 0x75, 0x1a, 0x5c, 0xd8, 0xdd, 0xec, 0x1b, 0xf7, 0x74,
++      0x30, 0x5d, 0xa9, 0xa3, 0x7d, 0xdd, 0x36, 0xc2, 0xc3, 0x3d, 0x24, 0xb7,
++      0xd5, 0x3e, 0x81, 0x3b, 0x30, 0xdd, 0xec, 0x62, 0x11, 0xc5, 0xbf, 0xea,
++      0x3c, 0x9e, 0xda, 0x9c, 0x77, 0x65, 0xbd, 0x65, 0xf5, 0xff, 0x50, 0x3c,
++      0x88, 0x57, 0x53, 0x5c, 0xd7, 0x55, 0xca, 0x7b, 0x1d, 0x3b, 0xec, 0x11,
++      0xbc, 0x56, 0xfa, 0x2d, 0xe4, 0x62, 0x66, 0x72, 0x93, 0x58, 0x8f, 0x83,
++      0x23, 0x57, 0x01, 0xb7, 0x70, 0x9e, 0x90, 0x6e, 0xd6, 0x7a, 0x1c, 0x2a,
++      0x7e, 0x03, 0x47, 0x47, 0x6b, 0xf1, 0xbc, 0x15, 0x47, 0xcb, 0x44, 0x65,
++      0x9f, 0xab, 0xbb, 0x35, 0x8c, 0x51, 0x4e, 0x5f, 0x6b, 0xab, 0x98, 0x49,
++      0x70, 0xfd, 0xa0, 0x58, 0x4b, 0x6f, 0xa0, 0x5a, 0xe3, 0xb5, 0x5e, 0xac,
++      0xc9, 0x18, 0xc8, 0xe7, 0xb3, 0x54, 0xff, 0x6a, 0xb0, 0x2b, 0x06, 0x71,
++      0x3b, 0xf5, 0xb0, 0xbb, 0xf3, 0xad, 0xfd, 0xc3, 0x4a, 0x1c, 0xc5, 0x96,
++      0x2c, 0xf9, 0x42, 0xa0, 0xc9, 0x32, 0xb0, 0xa5, 0x44, 0x15, 0xb4, 0xa4,
++      0xe2, 0x9b, 0xa5, 0x2b, 0x50, 0x6c, 0xe2, 0xb5, 0x1d, 0x98, 0xf6, 0xbe,
++      0x83, 0x98, 0x89, 0x9b, 0xcd, 0x20, 0x9b, 0x8d, 0x17, 0x54, 0xec, 0xb6,
++      0xf7, 0x5c, 0x28, 0xae, 0x34, 0xf5, 0x1c, 0xe5, 0x5b, 0xc0, 0x8b, 0x5b,
++      0x7e, 0x06, 0xbe, 0x96, 0xff, 0x50, 0x9e, 0xf1, 0xf6, 0x54, 0x39, 0xff,
++      0xa7, 0xdf, 0x0e, 0xbc, 0x2f, 0x45, 0x98, 0xe5, 0xdf, 0x1f, 0xad, 0xfc,
++      0x5b, 0xd1, 0x67, 0x99, 0x37, 0x0b, 0x70, 0x1c, 0xcc, 0xfd, 0x44, 0xcc,
++      0x57, 0xea, 0x80, 0xbe, 0x98, 0xcf, 0x51, 0xcd, 0xb3, 0x38, 0x9a, 0x26,
++      0xda, 0x50, 0xb3, 0x8b, 0x7f, 0xf3, 0xb8, 0xc0, 0x65, 0xdd, 0x9c, 0x63,
++      0x6d, 0x50, 0xc6, 0x56, 0x47, 0x2b, 0x35, 0xb8, 0x5a, 0x1f, 0xfe, 0x70,
++      0x56, 0xbe, 0xd7, 0xeb, 0xe9, 0x77, 0xa5, 0x86, 0x7e, 0x33, 0xc3, 0xcf,
++      0xbc, 0xa6, 0x06, 0x6f, 0xed, 0x35, 0xed, 0xa2, 0xb2, 0x84, 0xf7, 0xac,
++      0xe4, 0x08, 0x36, 0xce, 0xae, 0xa1, 0x98, 0x2f, 0x4c, 0x49, 0xdc, 0xca,
++      0xf2, 0xaa, 0xeb, 0xdb, 0x10, 0xfa, 0xe5, 0xbe, 0x2a, 0x5e, 0xcc, 0x7c,
++      0x7a, 0xdf, 0xdb, 0x64, 0xed, 0xca, 0x38, 0xc5, 0x59, 0x23, 0xd4, 0x05,
++      0xd4, 0xe0, 0xf5, 0x26, 0xd4, 0x51, 0xde, 0x06, 0xac, 0x5b, 0x64, 0xe0,
++      0x2b, 0x1c, 0xa7, 0x9a, 0x1b, 0x71, 0x2e, 0xc6, 0xf0, 0xce, 0x17, 0xc8,
++      0xc7, 0x51, 0x8e, 0x47, 0xf2, 0xf3, 0xc5, 0x18, 0x7a, 0xe2, 0x92, 0x28,
++      0xeb, 0xbb, 0x2a, 0x0d, 0x77, 0x3e, 0xd5, 0xec, 0xf7, 0xf6, 0xdc, 0x2d,
++      0x8b, 0x7d, 0x3a, 0x5e, 0xca, 0xfc, 0x0e, 0x8d, 0x73, 0x3c, 0xd9, 0x78,
++      0x2e, 0xaf, 0xe1, 0xfe, 0xe1, 0x66, 0x3a, 0x27, 0xd7, 0xca, 0x9a, 0xb3,
++      0x33, 0x8a, 0x8d, 0x67, 0x29, 0x16, 0x9f, 0x29, 0xb0, 0xad, 0x54, 0x5c,
++      0x96, 0x5e, 0x21, 0xc3, 0x4d, 0x1c, 0xdf, 0x49, 0x5a, 0xa3, 0x93, 0xec,
++      0x28, 0x74, 0x6b, 0x99, 0x3c, 0xb0, 0x92, 0x9f, 0x3b, 0x68, 0xac, 0x89,
++      0xbe, 0xbb, 0x65, 0xdd, 0xaf, 0x9d, 0x43, 0xff, 0xac, 0x73, 0x50, 0xdc,
++      0x9b, 0xf6, 0x5a, 0x74, 0x12, 0x0e, 0x52, 0x91, 0xa5, 0x3e, 0x3f, 0x41,
++      0x31, 0xb0, 0x8d, 0x7a, 0xf0, 0x7b, 0x84, 0xf5, 0xb6, 0x78, 0x78, 0xca,
++      0x83, 0x67, 0x1e, 0x5e, 0x5b, 0x5d, 0xc1, 0x5d, 0x9a, 0x6a, 0x31, 0x16,
++      0xab, 0xce, 0x71, 0x9e, 0xf6, 0x62, 0x6c, 0x54, 0xca, 0xcd, 0x76, 0x0b,
++      0xc9, 0x88, 0x63, 0xb3, 0x45, 0x39, 0x3d, 0xca, 0x6b, 0xa4, 0x4c, 0xa6,
++      0x16, 0xf4, 0xa8, 0xa2, 0x01, 0x33, 0xba, 0x2b, 0xd6, 0x66, 0x0c, 0xf1,
++      0xd5, 0x51, 0x15, 0xf9, 0xc2, 0x45, 0x64, 0x2f, 0x29, 0x9f, 0x4a, 0x21,
++      0xbb, 0x29, 0x55, 0x87, 0x57, 0x8a, 0x3a, 0x72, 0xfa, 0x05, 0xb9, 0xbc,
++      0xad, 0x17, 0x65, 0x92, 0xf3, 0x41, 0xaa, 0x33, 0x79, 0x44, 0x44, 0x50,
++      0x4c, 0x44, 0xf0, 0x78, 0x21, 0x81, 0x23, 0xe3, 0x11, 0x6c, 0xa5, 0x18,
++      0x7d, 0x31, 0xc3, 0x7b, 0x46, 0xf0, 0x70, 0x99, 0x31, 0x55, 0x80, 0x6c,
++      0xe4, 0x8a, 0x13, 0xde, 0x58, 0x1d, 0x96, 0x17, 0x99, 0xf7, 0x82, 0x6c,
++      0xb1, 0x2c, 0xbd, 0x25, 0x50, 0xe5, 0x3b, 0x4e, 0xf8, 0xca, 0xa0, 0x5a,
++      0x36, 0x8f, 0x70, 0x55, 0x33, 0x61, 0xa8, 0x04, 0x61, 0x28, 0x6b, 0x16,
++      0x17, 0x9a, 0x94, 0x8d, 0x52, 0x3e, 0x4b, 0xb5, 0xec, 0xc7, 0xf4, 0x39,
++      0x43, 0xf5, 0x34, 0x46, 0x3a, 0x5e, 0x36, 0xcc, 0x3a, 0xba, 0xc2, 0xa6,
++      0x7a, 0x9b, 0x55, 0x94, 0x7a, 0xee, 0x43, 0x81, 0x29, 0xde, 0x5f, 0xc5,
++      0x96, 0x02, 0xb0, 0xa9, 0x00, 0xf7, 0x08, 0xe5, 0x7e, 0xc3, 0x44, 0x14,
++      0xf1, 0x09, 0x1d, 0xc1, 0x89, 0x24, 0xcd, 0x6b, 0x48, 0xd0, 0x6f, 0x97,
++      0xb0, 0x60, 0xbd, 0xd3, 0x24, 0x16, 0x3e, 0x76, 0x5e, 0xee, 0x48, 0xa9,
++      0x58, 0xd7, 0x66, 0xf6, 0xde, 0x28, 0x90, 0x4d, 0x0e, 0x49, 0x19, 0x4e,
++      0x85, 0x29, 0x37, 0xe5, 0xa1, 0x04, 0xe9, 0x1d, 0x75, 0xe4, 0x83, 0xaf,
++      0x75, 0x5b, 0xf6, 0x6b, 0x20, 0xb9, 0x65, 0x5e, 0xc3, 0xe3, 0xae, 0xf8,
++      0xb0, 0xdb, 0x7a, 0xfc, 0x4d, 0xb4, 0xa3, 0x6b, 0x42, 0x15, 0xff, 0x36,
++      0xb4, 0x10, 0xe9, 0x29, 0xe8, 0x21, 0xe7, 0x80, 0x98, 0x79, 0xe2, 0xa0,
++      0x38, 0x39, 0x49, 0xe7, 0x2e, 0x90, 0x2e, 0x05, 0xd2, 0xa5, 0x40, 0xba,
++      0x90, 0x5d, 0x9e, 0xf1, 0xf0, 0x24, 0xeb, 0x9a, 0x24, 0x2c, 0x73, 0xdc,
++      0xc3, 0xbc, 0x8c, 0x11, 0x63, 0x8e, 0x99, 0x75, 0xc1, 0x7a, 0xb3, 0x9e,
++      0x52, 0xbe, 0x69, 0x57, 0xf4, 0x71, 0xa9, 0xdc, 0x6a, 0x53, 0x55, 0x5b,
++      0x48, 0xf9, 0xef, 0x36, 0xdb, 0x82, 0x75, 0x94, 0xf2, 0x3b, 0xa4, 0xd3,
++      0x16, 0xd2, 0x71, 0x53, 0x41, 0x1e, 0x0a, 0x59, 0x96, 0x31, 0x41, 0x67,
++      0x8b, 0x93, 0x4e, 0x89, 0x09, 0x8d, 0x74, 0x6d, 0x87, 0x4a, 0xba, 0x06,
++      0x26, 0xa0, 0x2b, 0x74, 0x1e, 0x63, 0x8c, 0xec, 0x34, 0xf5, 0x79, 0xe7,
++      0x61, 0xcc, 0xef, 0x8a, 0xab, 0x09, 0x9f, 0xa8, 0x64, 0xd7, 0x4d, 0x14,
++      0x3b, 0x39, 0x15, 0x46, 0xd8, 0x52, 0xa8, 0x27, 0x6a, 0xf8, 0xf6, 0x78,
++      0x1d, 0x26, 0xc8, 0xef, 0xc5, 0x71, 0xe8, 0x41, 0x92, 0xe9, 0x16, 0x0f,
++      0x8a, 0x4f, 0xc6, 0x5b, 0xd0, 0x19, 0x20, 0x9c, 0x04, 0x3c, 0x92, 0x8f,
++      0x8b, 0x89, 0x11, 0x15, 0x9b, 0x0b, 0xa7, 0x49, 0x3f, 0x89, 0xc3, 0xf6,
++      0xc3, 0xcd, 0xc4, 0x22, 0x1e, 0xb6, 0xcd, 0x1e, 0xe0, 0x2a, 0x8a, 0xb7,
++      0x00, 0xd6, 0x5a, 0xc8, 0x6e, 0xb3, 0xaf, 0xc2, 0x4c, 0x1f, 0x8c, 0xed,
++      0xb6, 0xab, 0x87, 0x60, 0x1e, 0xbb, 0x9a, 0x7a, 0xd3, 0x95, 0xa4, 0xcf,
++      0xa0, 0xe5, 0x0e, 0x50, 0xe1, 0x42, 0xb9, 0x6c, 0xf6, 0x1f, 0x25, 0x5f,
++      0x94, 0xa8, 0xff, 0x95, 0xca, 0x4d, 0xe2, 0xe9, 0xd1, 0xf3, 0xf2, 0xae,
++      0x94, 0x99, 0x6d, 0xa3, 0xb1, 0xe0, 0x90, 0x46, 0x38, 0x4d, 0xa3, 0x9c,
++      0x32, 0x6d, 0x80, 0x6b, 0x03, 0xb4, 0x30, 0xd5, 0xe2, 0x9f, 0x59, 0x47,
++      0x08, 0xa7, 0x6b, 0x20, 0x0c, 0x8f, 0xa5, 0x23, 0x02, 0xfb, 0x28, 0xc7,
++      0x27, 0x17, 0x9a, 0xc7, 0x56, 0xc3, 0x9d, 0x6e, 0x81, 0x39, 0x18, 0x0e,
++      0x9c, 0xc6, 0x07, 0x43, 0x21, 0xc2, 0x0d, 0xed, 0xf6, 0xeb, 0x30, 0xf5,
++      0x7d, 0x81, 0x5f, 0xc8, 0xfd, 0x09, 0x5c, 0x14, 0xc4, 0x19, 0x69, 0xfc,
++      0x3e, 0xaf, 0x61, 0xdd, 0x07, 0xb0, 0x2d, 0xc3, 0x38, 0x45, 0x25, 0x9c,
++      0x02, 0xbc, 0x93, 0x37, 0xb0, 0x7f, 0x61, 0x0d, 0xf5, 0x93, 0xd6, 0x9e,
++      0x75, 0x70, 0x57, 0xd1, 0xf5, 0x47, 0x8b, 0xd0, 0x5e, 0x79, 0x8a, 0x95,
++      0x0d, 0x42, 0xe0, 0x29, 0xeb, 0xac, 0xdd, 0x31, 0xc9, 0x18, 0x46, 0x4d,
++      0x2d, 0xa0, 0x5c, 0xdc, 0x5a, 0x16, 0xd4, 0xdb, 0x4c, 0x7d, 0x06, 0x6c,
++      0x1b, 0x9d, 0xec, 0x7a, 0x5e, 0x22, 0xc6, 0xba, 0xbb, 0x39, 0xd2, 0x73,
++      0xd5, 0x16, 0x3a, 0xff, 0x1a, 0xd2, 0xe9, 0x2e, 0xcb, 0xed, 0x21, 0xa9,
++      0xd4, 0xa3, 0xcc, 0xe6, 0xf7, 0x48, 0xf7, 0xb5, 0x54, 0x47, 0x8a, 0xe5,
++      0xe7, 0xea, 0xb9, 0x66, 0x4c, 0x94, 0xf9, 0x1e, 0xd7, 0x83, 0xa5, 0xf9,
++      0x6a, 0x3e, 0xb0, 0xff, 0xd9, 0xf7, 0x1c, 0x0b, 0x1c, 0x33, 0x1c, 0x27,
++      0x8c, 0xd1, 0x7a, 0x30, 0xda, 0xae, 0x20, 0x9b, 0x90, 0x72, 0xa5, 0x65,
++      0x8e, 0x70, 0x1d, 0xa7, 0x98, 0xcf, 0xee, 0xb5, 0xeb, 0x29, 0x3f, 0xe1,
++      0x3e, 0x69, 0x1b, 0x08, 0x39, 0x1c, 0x1b, 0x75, 0x14, 0xeb, 0x11, 0x6c,
++      0xa3, 0x58, 0xd1, 0x2c, 0x2b, 0x49, 0x97, 0x0d, 0xfd, 0x9d, 0x0c, 0xf1,
++      0x96, 0x61, 0x94, 0xed, 0x5a, 0xc2, 0x95, 0x2a, 0x62, 0xce, 0x21, 0xd9,
++      0x60, 0x35, 0xea, 0xd4, 0xb8, 0xf5, 0x7b, 0xb1, 0x9a, 0xee, 0x17, 0x06,
++      0xea, 0x1c, 0x9e, 0x3f, 0x27, 0x67, 0x62, 0x11, 0x8a, 0x33, 0xe6, 0xb1,
++      0xdc, 0x67, 0xf0, 0x91, 0x44, 0x9c, 0x79, 0xb3, 0x58, 0x9d, 0x81, 0x38,
++      0x48, 0x7b, 0xa1, 0x81, 0x73, 0xd7, 0xc0, 0x7c, 0xc7, 0x3a, 0x76, 0x88,
++      0x7a, 0x8f, 0xd1, 0x00, 0xaa, 0xb9, 0x2a, 0x02, 0x8e, 0xa5, 0xef, 0xc5,
++      0x51, 0xaf, 0x4e, 0x11, 0x52, 0x17, 0x2b, 0x76, 0xcf, 0x13, 0xbd, 0x84,
++      0xcd, 0xdb, 0x53, 0x70, 0x34, 0xb4, 0x19, 0x7f, 0x43, 0xa3, 0x9b, 0x29,
++      0xfe, 0xe7, 0x38, 0x11, 0x51, 0xda, 0x0d, 0xfd, 0x69, 0x5b, 0xa3, 0x3e,
++      0x2a, 0xe5, 0xd6, 0x94, 0x81, 0x29, 0x9b, 0x70, 0x74, 0x63, 0x10, 0x31,
++      0x0b, 0xba, 0xee, 0x58, 0x83, 0x07, 0x30, 0xc0, 0xf8, 0x37, 0x3a, 0x9f,
++      0x7a, 0x25, 0x8d, 0x89, 0x31, 0xbb, 0x06, 0xd9, 0x9b, 0x05, 0x22, 0x4e,
++      0x82, 0xce, 0x16, 0x42, 0xce, 0x7b, 0x66, 0x1d, 0x91, 0x7d, 0xd7, 0xde,
++      0x43, 0xfa, 0x8a, 0xf9, 0xb5, 0x0e, 0x8f, 0x59, 0x76, 0x09, 0x77, 0x11,
++      0x56, 0xa7, 0x21, 0x9a, 0xdf, 0x4c, 0xf3, 0x8f, 0x92, 0xec, 0x5c, 0xdc,
++      0xbb, 0x87, 0xd6, 0xb7, 0x38, 0xd6, 0xf4, 0xf3, 0xd8, 0x4e, 0x3a, 0x70,
++      0x8d, 0xe7, 0x31, 0x3e, 0xf3, 0x42, 0x3e, 0x33, 0xf5, 0x78, 0x8e, 0x2b,
++      0x1b, 0x3f, 0xcb, 0xd3, 0xde, 0x09, 0x64, 0xb7, 0xdb, 0x10, 0x13, 0xf6,
++      0x6e, 0xc2, 0x2f, 0xa8, 0x8f, 0x3a, 0x56, 0xff, 0x14, 0xa0, 0x44, 0x9c,
++      0x9d, 0x28, 0xc5, 0x80, 0x47, 0x0b, 0x96, 0x7b, 0x8f, 0x62, 0x0e, 0x26,
++      0x08, 0x13, 0x9f, 0x21, 0x4c, 0xbf, 0xab, 0x7d, 0xda, 0x8c, 0x83, 0xb1,
++      0x7e, 0x54, 0xbc, 0xb4, 0x5b, 0x41, 0xc7, 0x62, 0xea, 0x4b, 0x54, 0x4b,
++      0xae, 0xb1, 0xf9, 0xbe, 0x7c, 0x79, 0x7d, 0x05, 0x2f, 0xff, 0x6f, 0x39,
++      0x69, 0x92, 0xc5, 0xaa, 0x79, 0x69, 0xf5, 0x3d, 0x8d, 0x3f, 0x93, 0xd9,
++      0x18, 0xfb, 0x22, 0x42, 0xb5, 0xf8, 0x97, 0xf5, 0x28, 0x39, 0x49, 0xf2,
++      0x37, 0x75, 0x07, 0x75, 0x8e, 0x19, 0xf2, 0x65, 0xf6, 0x8d, 0x3c, 0x44,
++      0x7d, 0x9a, 0xf2, 0x2a, 0xc6, 0x7e, 0xe1, 0xfb, 0x3d, 0x19, 0x6f, 0x38,
++      0x41, 0xba, 0xa9, 0xe8, 0x4a, 0xa3, 0x5e, 0x71, 0xac, 0xb3, 0x63, 0x74,
++      0xe6, 0x16, 0xa7, 0x1e, 0xe7, 0x1a, 0xb8, 0x36, 0x46, 0xc5, 0x0f, 0x46,
++      0xcd, 0x1e, 0xc2, 0xc3, 0xab, 0xee, 0x21, 0x1c, 0x75, 0x9f, 0x50, 0xd1,
++      0x4b, 0x67, 0xb7, 0xda, 0xc8, 0x07, 0x84, 0x4d, 0x12, 0x6d, 0xd3, 0x66,
++      0x02, 0xd5, 0xf3, 0x5e, 0x90, 0x71, 0xcb, 0x72, 0xe3, 0xca, 0xc7, 0x32,
++      0x95, 0xe6, 0x18, 0xdf, 0x80, 0x70, 0x5c, 0x20, 0x94, 0x1e, 0xf2, 0x6c,
++      0x4b, 0x77, 0x2a, 0xd4, 0xa7, 0x1f, 0x62, 0x1f, 0x11, 0x7e, 0x7b, 0x59,
++      0xe6, 0xbe, 0xc2, 0xba, 0x6d, 0x9f, 0xd5, 0x73, 0x2d, 0xc7, 0x15, 0xfd,
++      0x96, 0x73, 0xd8, 0xde, 0x87, 0xa8, 0x8e, 0x77, 0x2d, 0xe9, 0xdc, 0x3e,
++      0xa8, 0x0c, 0x49, 0x63, 0x25, 0xfb, 0x93, 0x2e, 0x37, 0xb5, 0x9e, 0xaf,
++      0xb5, 0xa8, 0x73, 0x1c, 0xaf, 0x0f, 0x45, 0x45, 0xfd, 0x63, 0xae, 0xd7,
++      0x53, 0x5f, 0xa3, 0xb3, 0x9c, 0x4c, 0xf1, 0x19, 0x38, 0xc7, 0x8e, 0xe3,
++      0x8a, 0xd2, 0xed, 0xc4, 0x1b, 0xa0, 0xfd, 0xa1, 0x51, 0xbc, 0x41, 0x52,
++      0x9f, 0x39, 0xd7, 0x35, 0x25, 0x8d, 0x06, 0x96, 0x4f, 0xb6, 0x1e, 0x65,
++      0x5b, 0xf3, 0xdd, 0xb2, 0x6a, 0x6f, 0xe6, 0xe7, 0xf5, 0x74, 0xe9, 0x8e,
++      0xb1, 0xff, 0x50, 0x5f, 0xe7, 0xb0, 0x4d, 0x21, 0x6a, 0x9c, 0x4e, 0x63,
++      0x81, 0xd8, 0x21, 0xdd, 0x44, 0xb5, 0x86, 0x45, 0xc5, 0x84, 0xb7, 0x9e,
++      0xf7, 0xfe, 0xf4, 0xfa, 0x26, 0xf1, 0xce, 0x9e, 0xdf, 0xa5, 0x67, 0x2f,
++      0x46, 0x7a, 0x9f, 0xa2, 0x1c, 0xd2, 0x9c, 0x7e, 0x99, 0x6c, 0xe4, 0x18,
++      0x83, 0xf2, 0x8a, 0xbd, 0x56, 0xe6, 0x1a, 0x39, 0xd6, 0xe0, 0x26, 0x48,
++      0xce, 0xae, 0xc7, 0x7e, 0x75, 0x8e, 0xab, 0xdb, 0xa5, 0x9c, 0xb0, 0xd7,
++      0x90, 0x2d, 0x58, 0x4e, 0xd5, 0x16, 0x7b, 0x66, 0x6d, 0xd3, 0x5e, 0xf1,
++      0x5f, 0xc1, 0x3b, 0x83, 0x16, 0x72, 0xde, 0xc0, 0x4b, 0x79, 0xa5, 0x89,
++      0x6e, 0x2b, 0xe8, 0xb3, 0x05, 0x7e, 0xda, 0x43, 0xfa, 0x5d, 0x49, 0x58,
++      0x65, 0x91, 0x35, 0xdd, 0x1a, 0x58, 0x2f, 0x31, 0x77, 0x9a, 0x82, 0xe3,
++      0xbc, 0xd4, 0xda, 0x55, 0x84, 0xaf, 0xe0, 0x1e, 0xc5, 0xb6, 0x57, 0xf0,
++      0x32, 0xf1, 0xad, 0xb8, 0xc2, 0x32, 0x5a, 0x05, 0xf5, 0xb5, 0xbe, 0xa5,
++      0xe9, 0xe0, 0x2f, 0x63, 0x8f, 0xcf, 0x90, 0xf3, 0x74, 0xe0, 0x18, 0xec,
++      0x22, 0xdf, 0xe5, 0x56, 0x2a, 0x48, 0x2d, 0x06, 0x61, 0x8d, 0xa8, 0xd8,
++      0xba, 0x9b, 0xfd, 0xff, 0x3d, 0x9a, 0x67, 0xbe, 0xce, 0x66, 0x1d, 0xd6,
++      0xaa, 0xc3, 0x74, 0xb1, 0x24, 0x2c, 0x4a, 0xf6, 0xe0, 0xbd, 0xaa, 0x72,
++      0xaa, 0x32, 0xa2, 0x62, 0x72, 0x94, 0x79, 0x59, 0x17, 0xaa, 0xcd, 0x1c,
++      0x2b, 0x29, 0x8e, 0x8f, 0x8f, 0x65, 0x47, 0x3a, 0x1a, 0x43, 0x2d, 0xaf,
++      0x89, 0x0a, 0x7d, 0x0f, 0xcb, 0x85, 0x60, 0x3b, 0xc6, 0x48, 0xff, 0xf6,
++      0xf4, 0xe5, 0xb3, 0xfa, 0xff, 0xb1, 0x5e, 0xc1, 0x71, 0x51, 0x71, 0xd4,
++      0xdb, 0xbb, 0x62, 0xa3, 0x49, 0xb2, 0xf5, 0x44, 0xaa, 0xca, 0xf3, 0x38,
++      0xf1, 0x70, 0x9c, 0x7d, 0x66, 0x4f, 0x22, 0xea, 0x15, 0x8f, 0xe4, 0xe9,
++      0x92, 0x6a, 0x29, 0xd7, 0xd7, 0x52, 0x9e, 0x3c, 0x49, 0xbd, 0x69, 0x7f,
++      0xb1, 0x57, 0x6c, 0xcb, 0xeb, 0xd4, 0xa7, 0x96, 0x8b, 0xad, 0x79, 0x8b,
++      0x71, 0xd1, 0x6c, 0x9f, 0xaa, 0xbc, 0x8b, 0xda, 0x52, 0xfa, 0xe4, 0x3b,
++      0xa2, 0x48, 0x4e, 0x77, 0xd0, 0x37, 0x7f, 0xf8, 0x41, 0xa9, 0x58, 0xfc,
++      0x3e, 0xc8, 0x3a, 0x76, 0x22, 0x10, 0xe9, 0xe9, 0x59, 0x12, 0x40, 0xbd,
++      0x85, 0xbe, 0x66, 0xc2, 0x07, 0x57, 0x7a, 0x35, 0xdd, 0x80, 0x51, 0x6a,
++      0x6f, 0xac, 0xf8, 0x89, 0xf3, 0x0e, 0x6a, 0xad, 0x83, 0x5c, 0x0d, 0xd5,
++      0x91, 0x6b, 0xba, 0x43, 0xda, 0xd1, 0xee, 0xde, 0x96, 0xf6, 0xc9, 0xa6,
++      0x5c, 0xad, 0x73, 0x7d, 0x4b, 0xdb, 0xa4, 0xdb, 0xb2, 0x70, 0x08, 0xf8,
++      0xf2, 0x90, 0x0e, 0xcd, 0xb9, 0xd1, 0x0d, 0x74, 0x23, 0xa7, 0x52, 0x5c,
++      0xec, 0xe8, 0xb6, 0x7a, 0xa6, 0xc4, 0x4d, 0x37, 0x91, 0x1e, 0x2d, 0x9d,
++      0x93, 0x86, 0xb1, 0x39, 0xf3, 0xc0, 0x4d, 0x81, 0x29, 0xee, 0x2f, 0x1b,
++      0x06, 0xf7, 0xf1, 0x7b, 0x33, 0xba, 0x9b, 0x9e, 0xd0, 0xf1, 0xc0, 0xb2,
++      0xee, 0x41, 0x0c, 0xe4, 0x1f, 0x40, 0x7f, 0x9e, 0xdf, 0x3b, 0x69, 0x18,
++      0xe1, 0x1a, 0x5f, 0xe0, 0x77, 0x4e, 0x0f, 0x35, 0x30, 0x6e, 0xdc, 0x5e,
++      0x56, 0x71, 0xed, 0x10, 0xcf, 0x99, 0xcd, 0xef, 0xa3, 0xca, 0xfb, 0x59,
++      0x7c, 0x9f, 0xd4, 0x93, 0x6b, 0x1e, 0xb2, 0x81, 0x61, 0x29, 0x95, 0x0c,
++      0xdf, 0x63, 0x4e, 0x13, 0xd6, 0xe3, 0xbd, 0x7f, 0x4e, 0xbd, 0x71, 0x2e,
++      0xbf, 0x0b, 0x63, 0xca, 0x86, 0x87, 0x79, 0xee, 0xd4, 0xec, 0xdc, 0xbb,
++      0x34, 0x07, 0x71, 0x92, 0xea, 0xfa, 0x74, 0x25, 0x2f, 0xb2, 0xb5, 0xc3,
++      0x1a, 0xfe, 0xa8, 0xc0, 0x3c, 0x33, 0xb3, 0x3c, 0x3f, 0x21, 0x9e, 0x04,
++      0x56, 0xc4, 0xb8, 0x76, 0x53, 0xce, 0xec, 0xae, 0xbe, 0x2b, 0x93, 0xf2,
++      0x25, 0xfb, 0xc3, 0x68, 0xe5, 0x5d, 0x59, 0x54, 0x68, 0x8f, 0xd1, 0x33,
++      0x61, 0x95, 0x50, 0x2a, 0x2a, 0x42, 0x8f, 0xf1, 0xfa, 0x57, 0x53, 0x95,
++      0xf5, 0xc7, 0x52, 0xbc, 0xfe, 0xd7, 0xd7, 0xa8, 0xd9, 0xc8, 0x30, 0xdd,
++      0xa9, 0x0a, 0xff, 0x24, 0x77, 0x34, 0x56, 0x64, 0x57, 0xd6, 0x7d, 0x6f,
++      0x76, 0xdd, 0x41, 0x5a, 0xb7, 0x8f, 0x62, 0x8c, 0xd7, 0xb2, 0x9e, 0x1c,
++      0xa3, 0xd5, 0xf7, 0x86, 0x49, 0x71, 0x80, 0x7a, 0xf5, 0x81, 0x92, 0x2a,
++      0xf6, 0x52, 0x1d, 0x1c, 0xcf, 0x13, 0x36, 0xf2, 0xde, 0x05, 0x52, 0xcd,
++      0x2f, 0x7f, 0x23, 0x56, 0xf1, 0x21, 0xf7, 0xd5, 0x69, 0xea, 0xab, 0xed,
++      0x54, 0xdf, 0x55, 0x4f, 0xa7, 0xb0, 0x73, 0x84, 0xea, 0xbb, 0xc0, 0x49,
++      0xaf, 0xbe, 0x1c, 0x41, 0x7b, 0x89, 0xfb, 0x80, 0x25, 0xce, 0x15, 0x8c,
++      0x5c, 0x33, 0xc9, 0x6e, 0x29, 0x57, 0x6a, 0x03, 0xf5, 0x82, 0x2c, 0xf5,
++      0x64, 0xf1, 0x62, 0x89, 0x7f, 0x52, 0xf1, 0x8c, 0xf3, 0x19, 0xb2, 0x62,
++      0x4e, 0xbb, 0x8b, 0xfa, 0x76, 0x97, 0x71, 0xec, 0xc0, 0xf3, 0xc2, 0x9a,
++      0x3e, 0x27, 0xb2, 0xb7, 0x36, 0xe3, 0x41, 0xfc, 0x3c, 0x95, 0x5d, 0x11,
++      0xa5, 0x6f, 0xc2, 0xcc, 0x86, 0xc6, 0xef, 0x48, 0xbb, 0xdb, 0x7a, 0x36,
++      0x88, 0x36, 0xaa, 0x37, 0x6d, 0xee, 0x16, 0xb4, 0x51, 0xcf, 0xb7, 0xb5,
++      0xc3, 0x25, 0x5b, 0x7b, 0xa3, 0x54, 0xb5, 0x03, 0xc7, 0x29, 0xdb, 0x80,
++      0x42, 0xdf, 0xb1, 0xb2, 0x0b, 0x04, 0xf5, 0x55, 0xea, 0xbb, 0xc3, 0xd4,
++      0xb3, 0x2b, 0xf7, 0xce, 0x30, 0xe1, 0x16, 0xde, 0x7b, 0xdd, 0xec, 0xbb,
++      0x96, 0x7f, 0x90, 0x95, 0x1e, 0xf5, 0x0a, 0xd9, 0x83, 0xcf, 0xfc, 0xa3,
++      0x48, 0x65, 0xfc, 0x4c, 0x6c, 0xf6, 0xff, 0xf9, 0x21, 0x9c, 0x42, 0xf7,
++      0xc8, 0x21, 0x81, 0x1d, 0x6d, 0x95, 0x58, 0xee, 0xe4, 0xf7, 0x98, 0xde,
++      0x7b, 0xb7, 0x2a, 0x4f, 0xc5, 0x86, 0x0a, 0xe1, 0x99, 0x43, 0xe5, 0xac,
++      0xb8, 0x26, 0x8f, 0x01, 0xea, 0x89, 0xd9, 0x20, 0xf1, 0x5e, 0x53, 0xea,
++      0x15, 0xcb, 0xf3, 0x96, 0xb1, 0x89, 0x74, 0xdd, 0xa2, 0x77, 0xea, 0xe3,
++      0x84, 0x21, 0x68, 0x3f, 0x23, 0x4c, 0xf1, 0xaf, 0x39, 0x73, 0xb1, 0x7d,
++      0x36, 0x76, 0x28, 0x1f, 0x28, 0x7f, 0x06, 0xc5, 0x82, 0x49, 0xfe, 0xa9,
++      0x7b, 0xb1, 0x5b, 0xd1, 0xe3, 0x9c, 0xdc, 0x76, 0x33, 0xcf, 0x5f, 0x31,
++      0x6b, 0xfb, 0xa6, 0x38, 0xed, 0x49, 0xbf, 0x47, 0x66, 0xcf, 0xff, 0x7f,
++      0xad, 0xbd, 0xf6, 0x92, 0xff, 0xb9, 0x66, 0x86, 0xce, 0xc9, 0x18, 0x08,
++      0x6e, 0xdc, 0x61, 0xfc, 0x33, 0x6f, 0xd6, 0xe7, 0xd4, 0x15, 0xa3, 0x03,
++      0xb8, 0x71, 0x31, 0xdd, 0x7c, 0xe9, 0x0e, 0xb6, 0x8d, 0x7c, 0x95, 0x1c,
++      0x66, 0xbd, 0xcf, 0x93, 0xde, 0xd0, 0x6a, 0x9c, 0xb3, 0xb8, 0x7c, 0xa8,
++      0xb5, 0x3f, 0x2c, 0xcc, 0xe4, 0x90, 0x30, 0xfb, 0xa8, 0xbe, 0xd9, 0x93,
++      0x30, 0x9b, 0x17, 0x08, 0xd3, 0x58, 0x0b, 0xb6, 0xc9, 0x79, 0xb4, 0x95,
++      0xf8, 0xfb, 0x2c, 0x2c, 0xf2, 0x6b, 0xdf, 0x70, 0x00, 0x4a, 0xfa, 0x03,
++      0xb2, 0x2b, 0xe1, 0x35, 0xd1, 0x4c, 0xb9, 0xc4, 0xb1, 0x77, 0x1e, 0x9b,
++      0xf3, 0xd0, 0x5a, 0x88, 0xe7, 0x2a, 0xaa, 0xd1, 0xad, 0xc3, 0xe6, 0x59,
++      0xc2, 0x9c, 0x83, 0x5f, 0x0a, 0xb4, 0x26, 0xfb, 0x61, 0x0e, 0x6c, 0x41,
++      0xe7, 0xf4, 0x51, 0x61, 0x66, 0xcf, 0x12, 0x16, 0x0c, 0xa7, 0x2b, 0x32,
++      0x17, 0xcd, 0xca, 0x4c, 0x32, 0x3e, 0xf6, 0x72, 0x88, 0x30, 0x74, 0xfa,
++      0x6f, 0xe5, 0xb4, 0x67, 0xb3, 0xe0, 0xac, 0xfe, 0x4b, 0xe2, 0x15, 0x1f,
++      0x3c, 0x37, 0x6b, 0x1f, 0x42, 0x24, 0xb5, 0xcc, 0xc7, 0xf7, 0x30, 0x88,
++      0x35, 0xf9, 0x2f, 0xe2, 0x61, 0xc2, 0x43, 0x59, 0x6f, 0x7d, 0x2f, 0x72,
++      0x25, 0x88, 0xb5, 0xf9, 0xe9, 0xf0, 0x51, 0x3b, 0x88, 0xa2, 0x27, 0xe7,
++      0x7a, 0x1a, 0xeb, 0xa3, 0x0f, 0xdb, 0x8c, 0xef, 0xe4, 0x37, 0xd3, 0x73,
++      0xd6, 0xe3, 0xeb, 0xcf, 0xa3, 0x27, 0x9c, 0x22, 0xdc, 0xe6, 0xf1, 0x79,
++      0xf7, 0x75, 0xe2, 0x59, 0xce, 0x73, 0x23, 0xfc, 0xae, 0x61, 0x75, 0xa6,
++      0xcd, 0x78, 0xd8, 0xbb, 0x23, 0x1a, 0x58, 0x53, 0x32, 0x70, 0x07, 0xd5,
++      0xd5, 0xa2, 0x57, 0x57, 0x7f, 0x85, 0xe7, 0x15, 0xe2, 0x5b, 0x46, 0x7c,
++      0x9b, 0xbc, 0x31, 0x03, 0xcb, 0x4b, 0xc7, 0xbd, 0x58, 0x51, 0x1d, 0xf6,
++      0x03, 0xdb, 0x9e, 0xf1, 0x68, 0xf5, 0xae, 0xc6, 0x3e, 0xc9, 0x8a, 0x47,
++      0xf3, 0xbd, 0x62, 0x67, 0x3e, 0x4a, 0xfb, 0xb9, 0x62, 0x24, 0xa3, 0x8c,
++      0xc6, 0x20, 0xb1, 0x2c, 0x7d, 0x35, 0xd5, 0x19, 0x2b, 0x69, 0xd1, 0xb5,
++      0x65, 0x6d, 0x72, 0x2e, 0x61, 0xa7, 0x25, 0x58, 0x97, 0x0c, 0x51, 0xff,
++      0xfe, 0x16, 0xee, 0xd4, 0xc3, 0xe8, 0x4f, 0xde, 0x0b, 0xdc, 0x58, 0x43,
++      0xfd, 0xf6, 0x61, 0x0f, 0xb3, 0x86, 0x68, 0xdf, 0x1a, 0xaa, 0x0d, 0x77,
++      0x79, 0x7a, 0x4f, 0xb1, 0xae, 0x74, 0xce, 0xe5, 0x62, 0x84, 0xea, 0x7d,
++      0xa2, 0x82, 0x01, 0x36, 0x66, 0x8a, 0xfc, 0x3d, 0xb3, 0xb1, 0xcb, 0xb3,
++      0xf3, 0x4f, 0x36, 0xda, 0xa5, 0x5f, 0xc4, 0x2b, 0x3d, 0x75, 0x29, 0xb2,
++      0x8d, 0xdd, 0x58, 0x9f, 0xec, 0xc1, 0x1c, 0x6b, 0x39, 0xbe, 0xaa, 0xbb,
++      0x88, 0x5a, 0x63, 0xb8, 0xdb, 0x93, 0xc1, 0xf2, 0xbc, 0xbf, 0x6d, 0x10,
++      0x4d, 0x13, 0xc8, 0xf9, 0xbc, 0xfb, 0x50, 0xe5, 0xdd, 0x42, 0x4e, 0x09,
++      0x62, 0xd3, 0x2e, 0xfe, 0x56, 0x71, 0x77, 0xa6, 0xf2, 0xce, 0x70, 0x78,
++      0x2c, 0x88, 0xa1, 0x5d, 0xd4, 0xfb, 0x52, 0x21, 0xb8, 0x8d, 0x9f, 0x96,
++      0xdd, 0x4f, 0xb2, 0x2b, 0xf7, 0xef, 0xaf, 0x91, 0x5d, 0x67, 0x82, 0x41,
++      0x34, 0x13, 0x0c, 0x4b, 0x10, 0x4f, 0xc3, 0x54, 0x1d, 0x9a, 0xc7, 0xf8,
++      0xef, 0x23, 0x07, 0xc5, 0x7d, 0xa5, 0x0a, 0xcf, 0x46, 0xfe, 0x9b, 0x4a,
++      0x58, 0xc1, 0x7c, 0x8b, 0xd5, 0x55, 0x89, 0x47, 0xa3, 0x7b, 0x5c, 0x2d,
++      0xe6, 0x8f, 0xd5, 0xd1, 0x47, 0x47, 0x6c, 0x82, 0x26, 0xa6, 0x96, 0x8b,
++      0xaf, 0xe7, 0x93, 0x88, 0xd1, 0xfd, 0x32, 0xee, 0x54, 0xd6, 0xdf, 0x53,
++      0xfa, 0xbc, 0xf3, 0x07, 0xff, 0xbb, 0xb2, 0x6f, 0x01, 0x8e, 0xea, 0xbc,
++      0xd2, 0xfc, 0x6e, 0x3f, 0xa4, 0xd6, 0x93, 0xab, 0x27, 0x2d, 0x1e, 0xa6,
++      0x9b, 0xbe, 0x2d, 0xb5, 0xad, 0x4e, 0xb8, 0x0d, 0xa2, 0x90, 0x3d, 0xbd,
++      0xa5, 0x06, 0x0b, 0x5b, 0x04, 0x63, 0xcb, 0xb6, 0x32, 0x83, 0x67, 0x53,
++      0x63, 0x05, 0x03, 0xc6, 0xd8, 0x33, 0x91, 0x09, 0x35, 0x25, 0xef, 0xce,
++      0x44, 0x77, 0x25, 0x10, 0x02, 0xf5, 0x4b, 0x12, 0x04, 0x98, 0xaa, 0x2d,
++      0x37, 0x92, 0x40, 0xd8, 0x69, 0x49, 0x78, 0x92, 0xec, 0x90, 0x4c, 0xd5,
++      0x58, 0x01, 0x61, 0x20, 0x04, 0xe3, 0xec, 0x4e, 0x6d, 0x91, 0x5d, 0xcf,
++      0x98, 0xc2, 0x06, 0x9c, 0x18, 0x3f, 0x33, 0x59, 0x8b, 0x78, 0xe2, 0xbb,
++      0xdf, 0xb9, 0xdd, 0x0d, 0x82, 0x21, 0x99, 0x1a, 0x57, 0x75, 0x89, 0xee,
++      0x7b, 0xff, 0xff, 0x9e, 0xff, 0xfc, 0xe7, 0x7c, 0xe7, 0x3b, 0xe7, 0xfc,
++      0xb7, 0x4c, 0x2e, 0x2d, 0xfb, 0xb5, 0x08, 0xc5, 0xda, 0x94, 0xf9, 0x42,
++      0x96, 0xe3, 0x48, 0x1c, 0xed, 0xbe, 0xd9, 0x8f, 0x11, 0x99, 0x84, 0xcb,
++      0x41, 0xad, 0x08, 0x4b, 0x9e, 0xc7, 0x1f, 0xad, 0x3c, 0x51, 0x64, 0x90,
++      0xb9, 0x0b, 0x91, 0x3f, 0x2c, 0x73, 0x17, 0x21, 0xef, 0xa6, 0x2c, 0xf2,
++      0x1c, 0xa6, 0x5c, 0x13, 0x12, 0x5b, 0xe5, 0x79, 0xc7, 0x95, 0xa1, 0xb4,
++      0xc8, 0x90, 0x7b, 0xee, 0x59, 0x73, 0xa3, 0x5a, 0xc4, 0x18, 0x3e, 0x62,
++      0x6e, 0x62, 0x5e, 0xe2, 0x5f, 0xfa, 0x86, 0x99, 0x6a, 0x93, 0xb5, 0xba,
++      0xcd, 0xbd, 0x09, 0x27, 0xfa, 0xa9, 0xb7, 0xad, 0xa1, 0xa3, 0xc2, 0x67,
++      0xb3, 0xff, 0xe5, 0xf4, 0xf6, 0x97, 0xd4, 0xdb, 0xa9, 0xec, 0x3e, 0x1e,
++      0x57, 0x4e, 0xde, 0x8c, 0xf5, 0x22, 0xa3, 0xc8, 0xa5, 0xa0, 0x42, 0x13,
++      0xb9, 0x6c, 0x28, 0x67, 0xdc, 0xac, 0xa0, 0x7e, 0xca, 0x2d, 0x99, 0x9a,
++      0x95, 0x9f, 0x47, 0xa1, 0xce, 0x21, 0x17, 0x2c, 0x9b, 0xc8, 0xc8, 0x35,
++      0x45, 0xfd, 0x5c, 0xb8, 0x69, 0x13, 0xb3, 0xf5, 0x2c, 0x74, 0x46, 0x7c,
++      0xfa, 0xe2, 0x4b, 0x3b, 0x92, 0x32, 0xaf, 0x5d, 0xf2, 0x04, 0x2b, 0xdf,
++      0xb3, 0xd1, 0x9e, 0x56, 0x45, 0x33, 0x3a, 0xb0, 0x59, 0x7b, 0x20, 0x3e,
++      0x20, 0xeb, 0xcf, 0xad, 0xbd, 0x59, 0x79, 0x3a, 0x2a, 0xe3, 0x35, 0x2c,
++      0xb2, 0xc6, 0x59, 0xfb, 0xce, 0x71, 0x6f, 0x73, 0x5c, 0x80, 0x63, 0x32,
++      0xb6, 0xe9, 0x49, 0x7d, 0x26, 0x7e, 0xcd, 0x7d, 0x3a, 0xae, 0x74, 0xf2,
++      0x99, 0xb0, 0xf6, 0xf6, 0xfd, 0xac, 0xaf, 0x1f, 0xa7, 0x6f, 0xf2, 0x37,
++      0xa7, 0x8d, 0xf6, 0x5e, 0x04, 0xc7, 0xb0, 0xcb, 0xaa, 0x49, 0xc8, 0xdc,
++      0xcf, 0x45, 0xcb, 0x51, 0x70, 0x24, 0x37, 0x36, 0x13, 0xc3, 0x33, 0xbd,
++      0xac, 0x9c, 0x3f, 0x0a, 0x3e, 0x0a, 0x76, 0x1b, 0x4a, 0xe4, 0x66, 0x3f,
++      0x4a, 0x6a, 0x38, 0xd2, 0xa7, 0xcb, 0xa7, 0x3c, 0x52, 0xef, 0x53, 0x88,
++      0x19, 0xcc, 0x07, 0xd5, 0x55, 0x1e, 0x07, 0x71, 0x6e, 0x13, 0xbe, 0x20,
++      0xb7, 0x8d, 0x04, 0x9c, 0x96, 0x0f, 0x4b, 0xcd, 0x2f, 0x1f, 0x19, 0x0c,
++      0x02, 0x86, 0xa3, 0x8c, 0xbb, 0x5c, 0x2b, 0x63, 0x3d, 0xba, 0xd3, 0x5f,
++      0x98, 0x53, 0x95, 0xcc, 0xd9, 0xb5, 0x9b, 0x35, 0x22, 0xfa, 0x9d, 0x69,
++      0x8e, 0xf0, 0x5a, 0x6f, 0x3a, 0xb7, 0x4f, 0xe4, 0x10, 0xe4, 0x68, 0xcf,
++      0x68, 0xbf, 0x35, 0x37, 0xdc, 0x76, 0x6f, 0x0e, 0x9b, 0x73, 0x79, 0xa9,
++      0x60, 0x73, 0x31, 0x7a, 0xf7, 0x7a, 0x93, 0x29, 0x54, 0x22, 0xa9, 0xd9,
++      0xe6, 0xd3, 0x4b, 0x98, 0xf5, 0x7b, 0xfb, 0x9a, 0x61, 0xe5, 0xeb, 0x9e,
++      0x14, 0xfa, 0x2b, 0xc4, 0x8f, 0x9c, 0x5a, 0xbd, 0xa7, 0xcc, 0x56, 0x2e,
++      0xb2, 0x5b, 0x52, 0xd9, 0x07, 0x0b, 0xb0, 0x89, 0xb9, 0x76, 0xaa, 0x95,
++      0x98, 0x35, 0x68, 0xb4, 0x70, 0x7a, 0x57, 0x61, 0x38, 0xd5, 0xf9, 0x35,
++      0xbf, 0x97, 0xf1, 0x10, 0xc8, 0x67, 0xde, 0x7f, 0x09, 0x59, 0x4c, 0x1b,
++      0xf4, 0x1a, 0x36, 0x9b, 0x8c, 0xff, 0xcc, 0x34, 0xda, 0x64, 0xac, 0xcc,
++      0xc1, 0x67, 0xff, 0x1b, 0x5f, 0xf0, 0x50, 0x4f, 0x87, 0x2b, 0xa4, 0x7e,
++      0xa6, 0xd6, 0x92, 0xab, 0x0f, 0x16, 0xa3, 0x88, 0xb9, 0x6b, 0x7f, 0x95,
++      0xaf, 0x43, 0xb7, 0x15, 0xe2, 0xfc, 0x57, 0xfe, 0x13, 0x52, 0x55, 0x79,
++      0x70, 0xd5, 0x02, 0x0f, 0xc6, 0x6d, 0xb0, 0xd5, 0x12, 0x7b, 0x1b, 0x80,
++      0xe6, 0x09, 0xee, 0xdb, 0xa0, 0x82, 0xa7, 0x92, 0x36, 0x3c, 0x9a, 0xb4,
++      0x63, 0x6d, 0x12, 0xdf, 0x59, 0x04, 0x4c, 0xd7, 0xc0, 0xdf, 0x3e, 0xa3,
++      0x60, 0x6b, 0x29, 0xfc, 0xad, 0x31, 0xc5, 0xdf, 0xb2, 0x96, 0x39, 0xd3,
++      0x9a, 0x09, 0xe2, 0x19, 0xef, 0x75, 0x0e, 0x70, 0x5f, 0x07, 0xec, 0xa8,
++      0x19, 0xc0, 0x3d, 0xf9, 0x40, 0x83, 0x13, 0xfe, 0x19, 0xc6, 0x99, 0x72,
++      0x07, 0xfc, 0x53, 0x97, 0xed, 0xfe, 0xce, 0x1a, 0x3b, 0x37, 0xb7, 0x56,
++      0x64, 0x71, 0xe1, 0x31, 0xda, 0xf3, 0xa2, 0x41, 0xde, 0xcf, 0xfc, 0x5d,
++      0x65, 0x9e, 0xf3, 0xc9, 0x9f, 0x48, 0xfd, 0x52, 0xae, 0x49, 0xef, 0x52,
++      0x41, 0xe9, 0xa0, 0x9d, 0x18, 0x76, 0xce, 0x3c, 0x5f, 0x25, 0xf8, 0x0d,
++      0x3c, 0x45, 0xd9, 0xdc, 0xfc, 0x4d, 0xad, 0x25, 0x37, 0x5d, 0xa1, 0x62,
++      0xfd, 0xb0, 0xdc, 0x0b, 0x6b, 0x1e, 0x27, 0x7d, 0x2a, 0x8f, 0x3e, 0x7e,
++      0xc4, 0xea, 0x77, 0xd9, 0xb8, 0x46, 0x3b, 0x8a, 0x06, 0x81, 0x35, 0x71,
++      0x3c, 0x51, 0x0c, 0x7f, 0x44, 0x64, 0xac, 0x5b, 0xee, 0xe0, 0xd8, 0x62,
++      0xb4, 0x4c, 0x64, 0xc6, 0x3d, 0x3c, 0xf1, 0xa3, 0x8a, 0x4c, 0x2d, 0xf7,
++      0xf7, 0xf7, 0x5e, 0x7b, 0x1a, 0xfc, 0xd8, 0x94, 0xa4, 0xcd, 0xd9, 0x3c,
++      0x18, 0xce, 0xd6, 0x54, 0x37, 0xa4, 0xbc, 0xb3, 0x7a, 0xa3, 0xff, 0xbd,
++      0x38, 0xdb, 0x37, 0xa5, 0x2f, 0xcc, 0x70, 0x1e, 0x43, 0xd9, 0x40, 0xdd,
++      0x0d, 0x4f, 0x9a, 0x88, 0xea, 0x26, 0xc6, 0xf9, 0x79, 0x53, 0x87, 0x51,
++      0x44, 0x5f, 0xd8, 0x18, 0xfb, 0xd2, 0x34, 0xb2, 0xfe, 0xfc, 0x4a, 0x22,
++      0xa0, 0x6c, 0x21, 0x57, 0x7e, 0x95, 0xf1, 0x74, 0x8c, 0x9f, 0x51, 0xe6,
++      0x70, 0x4e, 0xca, 0x6d, 0xa3, 0x5f, 0xef, 0x4c, 0x01, 0x23, 0xcc, 0xd1,
++      0x0f, 0x2e, 0x17, 0xfe, 0x5e, 0xc4, 0xe7, 0xd1, 0x6b, 0x78, 0x4f, 0x9a,
++      0x9f, 0x23, 0xfc, 0x4c, 0x72, 0x4f, 0xf9, 0x3c, 0x04, 0xc6, 0x1d, 0x88,
++      0x8c, 0x13, 0x68, 0xc7, 0x03, 0x98, 0x62, 0x0c, 0xbc, 0x31, 0xaa, 0xa2,
++      0x64, 0xac, 0x1c, 0x1f, 0x1d, 0x26, 0x3e, 0x1e, 0xca, 0x70, 0xfe, 0x4d,
++      0xe3, 0xd2, 0xdf, 0x92, 0xf5, 0x49, 0x1f, 0x58, 0xfc, 0xa9, 0x00, 0x63,
++      0xa4, 0x1f, 0xd2, 0x0b, 0x7e, 0x57, 0xe7, 0xdc, 0xaa, 0xf4, 0xf1, 0x5a,
++      0x71, 0x34, 0xea, 0xf3, 0xf4, 0xd1, 0xe6, 0x0d, 0x87, 0xf8, 0x58, 0x03,
++      0x5e, 0x8d, 0xe6, 0x7a, 0x42, 0xbe, 0x96, 0x9f, 0x4a, 0x3d, 0x83, 0x21,
++      0x3b, 0x4f, 0x93, 0x6b, 0xb9, 0x58, 0x2a, 0x6b, 0x96, 0xba, 0x74, 0x8e,
++      0xb7, 0xcc, 0xfe, 0xfd, 0x8c, 0x29, 0x7d, 0xca, 0xd7, 0x26, 0xbd, 0x7d,
++      0x29, 0xe8, 0x56, 0xac, 0x3c, 0x5c, 0xe7, 0x4d, 0x1a, 0x90, 0xfd, 0x6d,
++      0xa0, 0x0c, 0xdf, 0xa5, 0xed, 0x07, 0x44, 0xd7, 0x8c, 0xed, 0x52, 0xef,
++      0x2d, 0x43, 0xff, 0x40, 0x39, 0xf6, 0x0c, 0x18, 0xe8, 0x5d, 0xde, 0x86,
++      0x33, 0x51, 0x13, 0x9b, 0x42, 0x26, 0xd6, 0x84, 0xbc, 0x81, 0x57, 0x50,
++      0xdf, 0x78, 0x14, 0x8f, 0x91, 0x43, 0xa8, 0xd4, 0xc9, 0x37, 0xf0, 0xce,
++      0x5e, 0x07, 0x36, 0xeb, 0x7f, 0x4c, 0x1f, 0x36, 0xcd, 0xf7, 0x96, 0x2d,
++      0xc0, 0x70, 0xa2, 0x5e, 0xed, 0xa6, 0x7c, 0x91, 0x36, 0xee, 0x55, 0xd0,
++      0x81, 0x67, 0xf5, 0xef, 0xf0, 0x5e, 0xb7, 0xcd, 0xa1, 0xc9, 0x77, 0x1b,
++      0xe3, 0xa9, 0xec, 0xa5, 0x41, 0xfb, 0xca, 0xc4, 0xb2, 0x48, 0xb6, 0xce,
++      0xbe, 0xb9, 0x41, 0x30, 0xbf, 0x18, 0xa7, 0xa9, 0xb7, 0x13, 0xc9, 0x08,
++      0xc3, 0x2e, 0x94, 0x67, 0x1b, 0xba, 0xf0, 0x34, 0xf9, 0xc6, 0x3b, 0x24,
++      0x02, 0xf7, 0xc7, 0x15, 0x34, 0xd6, 0xe9, 0xb8, 0x98, 0xfe, 0x06, 0xde,
++      0x1a, 0x0d, 0xe3, 0x4d, 0xc6, 0xf4, 0x25, 0xdf, 0xf5, 0x92, 0x83, 0x7a,
++      0x70, 0x3e, 0x1d, 0xc6, 0xb9, 0xa8, 0xb7, 0xf5, 0x05, 0x65, 0x01, 0x7e,
++      0x9a, 0x76, 0xe0, 0xde, 0x38, 0xf0, 0x4b, 0xce, 0xe3, 0x8f, 0x3b, 0x70,
++      0x25, 0xad, 0xe2, 0x28, 0xf7, 0xc7, 0x11, 0x5a, 0x02, 0xa3, 0xcd, 0x83,
++      0x23, 0x43, 0x8f, 0x62, 0x2a, 0xf5, 0x28, 0x4e, 0x25, 0xdf, 0x31, 0x5d,
++      0x9a, 0xf4, 0x75, 0x5c, 0xb8, 0xc2, 0x7c, 0x6c, 0x9a, 0xda, 0x28, 0x5e,
++      0xd1, 0xca, 0x38, 0xaf, 0x19, 0xa2, 0xf7, 0xb7, 0xf8, 0xdb, 0xfd, 0xf1,
++      0x46, 0x1c, 0x1c, 0xa7, 0x4a, 0x13, 0x3a, 0x12, 0x31, 0x79, 0x56, 0x03,
++      0x62, 0xe4, 0x85, 0xfd, 0x4c, 0xdb, 0xb7, 0x86, 0xee, 0x95, 0x5c, 0x43,
++      0x69, 0xa9, 0xed, 0xcf, 0xae, 0xa3, 0x71, 0x56, 0xcf, 0x4e, 0x72, 0x28,
++      0xea, 0x95, 0xe3, 0xfe, 0x36, 0x11, 0xb4, 0x62, 0xd3, 0xb1, 0x9b, 0xfb,
++      0xd1, 0xc8, 0xfd, 0xf8, 0x06, 0x2e, 0xee, 0x6d, 0xc3, 0x5b, 0xc4, 0xbb,
++      0xd2, 0x65, 0xbe, 0x4e, 0xa7, 0xad, 0x9e, 0x73, 0xa7, 0xcd, 0x54, 0x95,
++      0xe8, 0xb4, 0x0d, 0xbf, 0x88, 0x8a, 0x4e, 0xd3, 0xc4, 0x3f, 0x9f, 0xc7,
++      0x6f, 0xff, 0xcb, 0x4a, 0xda, 0xb3, 0xad, 0x3b, 0x98, 0xe9, 0x41, 0x15,
++      0xaf, 0x70, 0xe1, 0xaa, 0x25, 0x9b, 0xc8, 0xfa, 0x87, 0xe4, 0xfb, 0x85,
++      0xb9, 0xa6, 0x4a, 0xe4, 0x33, 0xcc, 0x3c, 0x4d, 0x0b, 0xe4, 0x29, 0x12,
++      0x67, 0x03, 0x56, 0x3d, 0xbe, 0x2e, 0xde, 0x05, 0x7b, 0xa8, 0x98, 0x79,
++      0x98, 0x77, 0xa6, 0x03, 0x6f, 0xe1, 0xda, 0xa4, 0x0b, 0x8b, 0xe3, 0x1a,
++      0x5e, 0x9e, 0x7c, 0x8d, 0xcf, 0xfa, 0x47, 0x5c, 0xe6, 0x77, 0x5f, 0x3c,
++      0xe3, 0x6f, 0xdd, 0x0d, 0x6d, 0x78, 0x30, 0x2d, 0xeb, 0xcb, 0xe3, 0x83,
++      0x74, 0x44, 0xd2, 0xb2, 0xce, 0x18, 0x7d, 0x43, 0xd6, 0x59, 0xfe, 0xef,
++      0xac, 0xf3, 0xbf, 0x72, 0xbe, 0x05, 0xf4, 0xa5, 0x5c, 0xec, 0x28, 0xc1,
++      0x91, 0xa4, 0x8a, 0xd3, 0x7a, 0x31, 0x2e, 0xa9, 0x52, 0x5f, 0x76, 0x31,
++      0x86, 0x38, 0xd0, 0xcc, 0x9c, 0x71, 0x84, 0x9f, 0x8d, 0xcc, 0x7f, 0xce,
++      0xea, 0x0e, 0x9c, 0xd2, 0x17, 0x10, 0xeb, 0xef, 0xb4, 0x61, 0xb9, 0x46,
++      0xb2, 0x5f, 0x56, 0x8e, 0x73, 0x52, 0xff, 0xb3, 0xae, 0xbb, 0xa4, 0x2f,
++      0x89, 0x31, 0xea, 0x2b, 0x2f, 0xf6, 0x1b, 0xf3, 0xaa, 0x85, 0x35, 0x77,
++      0xca, 0x77, 0xe7, 0x3c, 0x12, 0x82, 0x7f, 0x69, 0x6e, 0xad, 0xca, 0xc6,
++      0x2e, 0xe5, 0x4f, 0x2b, 0x33, 0x78, 0x21, 0x71, 0xec, 0xef, 0x72, 0xd8,
++      0x21, 0xf9, 0x64, 0x1b, 0xe3, 0x10, 0xe3, 0xf2, 0xf1, 0x6d, 0x92, 0xe7,
++      0xd9, 0xc2, 0xef, 0xb5, 0xad, 0xd2, 0xf2, 0x60, 0xb7, 0xf8, 0xde, 0x7b,
++      0x2f, 0x65, 0x38, 0xfa, 0xfb, 0x2f, 0x69, 0xd6, 0xdf, 0xeb, 0x2f, 0x2d,
++      0xb6, 0xfe, 0x7e, 0xf2, 0x92, 0x2f, 0x75, 0x2b, 0x5e, 0x65, 0x38, 0xb0,
++      0x75, 0x6e, 0x05, 0x7d, 0xba, 0xa1, 0x3c, 0xdc, 0x20, 0x5c, 0x72, 0x36,
++      0x8f, 0x08, 0x28, 0x67, 0xa3, 0x92, 0xa7, 0x15, 0x1a, 0xcc, 0xe3, 0x95,
++      0x46, 0xbf, 0x46, 0x3c, 0xee, 0x42, 0xc9, 0x32, 0x0d, 0x17, 0xa8, 0x73,
++      0xc2, 0x28, 0xed, 0xf8, 0xff, 0x20, 0xba, 0x17, 0xed, 0x85, 0x16, 0xf6,
++      0x98, 0x66, 0x7f, 0x48, 0x6a, 0x0c, 0x32, 0xaf, 0x03, 0x1f, 0x70, 0x2f,
++      0x7f, 0x35, 0x5a, 0x84, 0xf7, 0x53, 0x1a, 0x2e, 0xa5, 0xdb, 0xb0, 0x7b,
++      0x32, 0xc3, 0x33, 0x4e, 0x59, 0xfc, 0x5b, 0x63, 0x8e, 0xe9, 0xc0, 0xc1,
++      0xa8, 0x86, 0x58, 0xe2, 0x75, 0xb3, 0x40, 0xf3, 0x4d, 0xf9, 0xed, 0x0e,
++      0x1c, 0x48, 0x4f, 0x63, 0x72, 0xe0, 0x63, 0xd3, 0xae, 0x75, 0xe1, 0xa3,
++      0xd0, 0x34, 0x26, 0x0e, 0x49, 0x5f, 0x4f, 0x47, 0xff, 0x90, 0x86, 0xde,
++      0x84, 0x0d, 0x7b, 0x96, 0xb7, 0xa0, 0x7f, 0xb2, 0x19, 0xc6, 0x98, 0x07,
++      0x7b, 0xd2, 0x69, 0x4c, 0x8d, 0x4e, 0xe3, 0x4c, 0x52, 0x6b, 0x2c, 0x50,
++      0xa6, 0x71, 0x9a, 0xcf, 0xd9, 0x91, 0x78, 0x1b, 0x06, 0xe7, 0xd8, 0x99,
++      0x94, 0x9a, 0xa4, 0x3c, 0x67, 0x1a, 0xdd, 0xa9, 0xbb, 0xd5, 0x44, 0x28,
++      0x4f, 0xa2, 0xa7, 0x3d, 0x53, 0xab, 0x27, 0xbe, 0xa6, 0x35, 0xa5, 0x8f,
++      0xfb, 0x74, 0x34, 0x9d, 0xab, 0xdb, 0xdf, 0x59, 0x0b, 0xd1, 0xd1, 0x37,
++      0xd4, 0xc2, 0x31, 0x1a, 0xba, 0x13, 0xd2, 0x1b, 0xf5, 0xf1, 0x99, 0x26,
++      0x7e, 0xa9, 0x7b, 0xdd, 0x8b, 0xf9, 0xf7, 0xb0, 0xde, 0x89, 0x2d, 0x9c,
++      0x6b, 0x8a, 0x79, 0x90, 0xa6, 0x78, 0x1b, 0x0d, 0xd8, 0xf1, 0x9e, 0x4e,
++      0xce, 0x53, 0x69, 0xc7, 0xab, 0x7a, 0x09, 0x22, 0x65, 0x76, 0xd4, 0x87,
++      0x18, 0xa7, 0xb3, 0x71, 0xfb, 0xc3, 0xa4, 0x82, 0x47, 0x89, 0xa9, 0x27,
++      0x42, 0xf5, 0xed, 0xab, 0x85, 0xd1, 0x1d, 0x52, 0x70, 0x4d, 0xbb, 0x61,
++      0x1a, 0x8c, 0x5d, 0x2e, 0x7f, 0x6e, 0x8f, 0x7e, 0x6d, 0x66, 0xfa, 0x9b,
++      0x5f, 0x98, 0xb9, 0x71, 0x33, 0x94, 0xf1, 0x29, 0x8e, 0x5b, 0xbc, 0xac,
++      0xbe, 0x53, 0xc6, 0xb9, 0x89, 0xe9, 0x32, 0x4e, 0xea, 0xd1, 0xb7, 0xc6,
++      0xe9, 0xd8, 0x39, 0x14, 0xb1, 0xe4, 0xdd, 0x95, 0xc0, 0x52, 0x07, 0xc4,
++      0x9f, 0xea, 0xd5, 0x2b, 0x40, 0xd7, 0xb4, 0x3e, 0x87, 0x5c, 0xc7, 0x1f,
++      0xd8, 0x08, 0xd1, 0x95, 0xe4, 0x92, 0x6f, 0x63, 0x4f, 0x74, 0x14, 0xcc,
++      0x27, 0x89, 0x73, 0xfe, 0xf5, 0x23, 0x48, 0xe1, 0xf9, 0x74, 0x0a, 0x2f,
++      0x50, 0x47, 0x86, 0x75, 0x6e, 0x29, 0x8d, 0x3f, 0x8f, 0xbe, 0x8d, 0x98,
++      0xb5, 0x67, 0x47, 0xb1, 0x21, 0xfa, 0xf7, 0x55, 0xc2, 0x11, 0x77, 0x24,
++      0x56, 0x72, 0x7e, 0xd1, 0xab, 0xb7, 0xd5, 0xc0, 0x97, 0x9c, 0x7f, 0x25,
++      0x7a, 0x46, 0x4c, 0xf3, 0x7b, 0x8c, 0x5f, 0x3f, 0x23, 0xbf, 0xba, 0x96,
++      0x3d, 0x03, 0x55, 0x40, 0x7d, 0x6b, 0x56, 0x1c, 0x6b, 0xe3, 0x3e, 0x57,
++      0x0b, 0xaf, 0x47, 0xc9, 0xb8, 0xa6, 0x2c, 0x8e, 0xc9, 0xbe, 0x93, 0x37,
++      0x8e, 0x7b, 0xf0, 0x14, 0x39, 0x4a, 0xfe, 0xe1, 0x1f, 0x28, 0x12, 0xcb,
++      0x6a, 0x0e, 0x91, 0xef, 0x1f, 0xf2, 0x28, 0x4b, 0xf6, 0xb9, 0xf0, 0x68,
++      0x4c, 0xea, 0x37, 0xcd, 0xe8, 0xd9, 0xaf, 0xf1, 0x1e, 0xaf, 0x7e, 0x81,
++      0x39, 0xe9, 0x69, 0xf8, 0x3c, 0x23, 0xe4, 0x55, 0x6e, 0x62, 0xb1, 0xe3,
++      0x70, 0x29, 0x8a, 0x0e, 0xab, 0xb0, 0x1d, 0x2e, 0x47, 0xf1, 0x61, 0x37,
++      0x6a, 0x18, 0xdb, 0xdc, 0xe3, 0x17, 0x31, 0xb9, 0x0f, 0x6a, 0x51, 0xf8,
++      0x73, 0x33, 0x5f, 0x93, 0x3e, 0x5b, 0x00, 0xa5, 0xe3, 0xdb, 0x91, 0x8e,
++      0x05, 0x51, 0x3c, 0x4e, 0x2a, 0x35, 0x7e, 0x5c, 0xa9, 0xe7, 0x33, 0x1f,
++      0x8a, 0x69, 0x9c, 0x2b, 0xc3, 0x75, 0x56, 0x73, 0x5c, 0x5f, 0xc2, 0xbb,
++      0x5e, 0x7a, 0x65, 0xd7, 0xf4, 0x37, 0x50, 0x30, 0x70, 0xeb, 0x2c, 0x97,
++      0x16, 0xc2, 0x3c, 0x72, 0x91, 0xd6, 0x67, 0x91, 0x39, 0xd7, 0xf5, 0x70,
++      0x76, 0x4d, 0x41, 0x59, 0x93, 0xb3, 0x8d, 0xb6, 0x30, 0x57, 0xea, 0x5f,
++      0xb8, 0x4c, 0xfb, 0xb9, 0x9f, 0xf2, 0xde, 0x60, 0x6e, 0xd8, 0x19, 0x13,
++      0xbb, 0xff, 0x81, 0x42, 0xbf, 0xc1, 0x4c, 0xaa, 0x08, 0x1f, 0xa7, 0x3c,
++      0x8a, 0x8f, 0xeb, 0xf9, 0x0b, 0x5e, 0xff, 0x73, 0xae, 0x67, 0xc7, 0x7e,
++      0x6f, 0xeb, 0x49, 0xc5, 0xdb, 0xbe, 0x4e, 0xf1, 0xa9, 0x3b, 0x94, 0x62,
++      0x5c, 0x1e, 0x2d, 0xc5, 0x15, 0xc6, 0xe2, 0x1b, 0xa3, 0xe5, 0xb8, 0x3a,
++      0x5a, 0x49, 0x5f, 0xd1, 0x38, 0x87, 0x69, 0x96, 0x68, 0x6e, 0xcc, 0xa4,
++      0x5f, 0xc0, 0x9c, 0xd8, 0x02, 0x7c, 0x9c, 0xde, 0x82, 0xd2, 0x98, 0x70,
++      0x76, 0x0f, 0x3e, 0xe2, 0xf5, 0x0f, 0xd3, 0x13, 0x28, 0xdc, 0xf7, 0x39,
++      0xef, 0x31, 0xcd, 0x87, 0xb8, 0xc6, 0xab, 0xe9, 0x0e, 0x14, 0xef, 0xdb,
++      0x06, 0xc7, 0x3e, 0xb3, 0xab, 0x27, 0x84, 0x9f, 0xda, 0xb9, 0x96, 0x6e,
++      0xdd, 0x3b, 0xb5, 0xd8, 0x1e, 0xe4, 0x1c, 0x3a, 0xe7, 0x3c, 0xae, 0x2c,
++      0x19, 0xdf, 0x86, 0xd2, 0x7d, 0x1e, 0x6c, 0xa5, 0x2e, 0x27, 0xa0, 0x05,
++      0xd6, 0x29, 0xdb, 0x90, 0x77, 0x38, 0xa3, 0x83, 0x4d, 0xe3, 0x19, 0x1f,
++      0x79, 0xa8, 0x41, 0xea, 0x43, 0xc7, 0x95, 0x11, 0xcb, 0x47, 0xdc, 0x72,
++      0xfe, 0x04, 0xd3, 0xe9, 0x22, 0x9c, 0x4d, 0x89, 0x8e, 0xe4, 0xec, 0xda,
++      0x04, 0xf2, 0xf7, 0x11, 0x23, 0x47, 0x75, 0x8b, 0x43, 0x88, 0x6f, 0x8c,
++      0xa6, 0xef, 0xe6, 0x5f, 0x41, 0xec, 0x49, 0xd4, 0xd0, 0xb7, 0x16, 0x60,
++      0xcd, 0x3e, 0xe9, 0x91, 0x4e, 0xdd, 0xef, 0xa2, 0x35, 0x8d, 0xa5, 0xef,
++      0xe6, 0x5b, 0x0d, 0xb4, 0x53, 0x6f, 0x8b, 0x01, 0x39, 0xab, 0x61, 0x62,
++      0x5a, 0x3f, 0xae, 0xd8, 0x62, 0x92, 0x6f, 0xb5, 0xd1, 0xe7, 0x5b, 0xd1,
++      0x33, 0x84, 0xf6, 0x83, 0x0d, 0xd2, 0xb7, 0x75, 0x62, 0x84, 0xf9, 0xd3,
++      0x65, 0xe6, 0x1c, 0xd4, 0xb9, 0x9a, 0x17, 0xce, 0xc3, 0xf0, 0xa8, 0x0b,
++      0x3f, 0x1a, 0xf5, 0xa0, 0x31, 0xf6, 0x39, 0x31, 0xa3, 0x10, 0xc7, 0xa9,
++      0xef, 0x49, 0xf2, 0x9f, 0x8f, 0xa2, 0x2a, 0x26, 0x18, 0x6b, 0x3f, 0x8c,
++      0x56, 0x62, 0x9c, 0xb9, 0xd6, 0x75, 0xe2, 0x4c, 0x9a, 0x7b, 0xf3, 0x01,
++      0xf3, 0x8e, 0xef, 0xa5, 0x83, 0xf8, 0x55, 0x34, 0x88, 0x57, 0xa9, 0xc7,
++      0xba, 0x98, 0x9b, 0x32, 0x1d, 0x53, 0x70, 0xe8, 0xb8, 0x92, 0x47, 0xbb,
++      0xf0, 0xc7, 0x34, 0xcf, 0x48, 0xd6, 0x2e, 0xb4, 0xf1, 0x56, 0xfa, 0x91,
++      0xf4, 0xff, 0x25, 0x3e, 0x38, 0xf4, 0x11, 0x90, 0xd3, 0x05, 0x73, 0x75,
++      0x42, 0xaf, 0x7b, 0x0a, 0x15, 0xf4, 0xa5, 0x2f, 0x4d, 0x55, 0x93, 0x9a,
++      0x58, 0x32, 0x74, 0x2d, 0xaa, 0xa9, 0x57, 0xad, 0x35, 0x18, 0x8a, 0x73,
++      0x39, 0x39, 0x46, 0xe5, 0x0e, 0xae, 0x5f, 0x23, 0x66, 0x38, 0xe8, 0x32,
++      0x26, 0xef, 0xbb, 0x8e, 0xfb, 0x0e, 0xfd, 0x69, 0x75, 0x86, 0x03, 0xd1,
++      0x9f, 0x6d, 0x77, 0xd6, 0xb1, 0xa4, 0x96, 0xbd, 0x37, 0xf4, 0x46, 0x34,
++      0x56, 0x2d, 0x3d, 0xa5, 0x93, 0x08, 0x52, 0x2f, 0x77, 0xcb, 0x15, 0x4c,
++      0xbc, 0x45, 0x4c, 0xb9, 0x9a, 0x14, 0xbe, 0x24, 0x3c, 0xa9, 0x8b, 0x31,
++      0xa9, 0x84, 0x3c, 0x41, 0xc3, 0x4e, 0x72, 0x79, 0x5f, 0x7c, 0x8a, 0xb9,
++      0xca, 0x57, 0xc9, 0xd5, 0x4a, 0x39, 0x8d, 0xc1, 0xe7, 0xb5, 0x62, 0x0f,
++      0x7d, 0xb3, 0x40, 0x5b, 0x8c, 0x35, 0xe4, 0x41, 0x0e, 0x8d, 0xa1, 0xe4,
++      0x09, 0x89, 0x27, 0x40, 0x6d, 0x5c, 0x95, 0x7e, 0xcf, 0xfa, 0x9f, 0xe1,
++      0x7e, 0xb4, 0x57, 0xb9, 0x20, 0x3d, 0x9a, 0x37, 0xd1, 0x84, 0xd4, 0xd7,
++      0xad, 0xde, 0x30, 0xdc, 0x61, 0xcd, 0xb8, 0x88, 0x45, 0x16, 0x23, 0x2f,
++      0x0c, 0x8b, 0x3c, 0x95, 0xd4, 0xbf, 0x8a, 0x77, 0xa9, 0xd7, 0x2b, 0x51,
++      0xdf, 0xcc, 0x83, 0xa8, 0x3f, 0x73, 0xc5, 0x2e, 0xfd, 0x2b, 0xb9, 0x3f,
++      0x08, 0x8d, 0xf3, 0x7d, 0x1a, 0x0d, 0x61, 0x40, 0x95, 0xef, 0xc2, 0x1b,
++      0x5b, 0xd1, 0x3d, 0x22, 0x32, 0x98, 0x66, 0x39, 0xf1, 0xf1, 0x09, 0xeb,
++      0xf9, 0xf2, 0xec, 0x3b, 0xf3, 0x0e, 0xaf, 0x6a, 0x20, 0x97, 0x7b, 0x4c,
++      0xe3, 0x68, 0xd2, 0x03, 0xc7, 0xf2, 0xff, 0x41, 0x3d, 0x4c, 0x63, 0x34,
++      0xa5, 0x91, 0x53, 0x16, 0xc1, 0x53, 0x15, 0x44, 0x3f, 0xe3, 0x78, 0x8c,
++      0xf7, 0xa7, 0x63, 0x45, 0x30, 0xaa, 0x32, 0xcf, 0xfc, 0x6a, 0xfc, 0xba,
++      0x39, 0xf5, 0xb8, 0xcc, 0x29, 0xdf, 0x7f, 0xce, 0x31, 0x73, 0xe5, 0xd8,
++      0x23, 0x36, 0xc7, 0xae, 0x9a, 0x53, 0xad, 0xb3, 0x7f, 0x2f, 0xb3, 0xce,
++      0x10, 0x45, 0x6c, 0x55, 0x52, 0x6f, 0xb1, 0xf4, 0xd2, 0x4d, 0xbd, 0xcc,
++      0xd1, 0xde, 0x36, 0x1f, 0xb3, 0xe4, 0x9a, 0xaa, 0x16, 0x9e, 0x5f, 0x1b,
++      0xff, 0xbc, 0x5a, 0xea, 0xa5, 0x12, 0xc3, 0x5c, 0x61, 0xad, 0xf1, 0x0c,
++      0xfe, 0xd1, 0xbc, 0x74, 0xdb, 0x3c, 0x15, 0xbc, 0x26, 0xf1, 0xe8, 0x52,
++      0xb6, 0x1f, 0xed, 0xce, 0xe6, 0x02, 0xd3, 0x38, 0x99, 0x94, 0x58, 0xe0,
++      0xc1, 0x06, 0xa9, 0x43, 0xa9, 0xde, 0x3e, 0x03, 0x53, 0xe4, 0x7e, 0xef,
++      0x50, 0xf7, 0x4c, 0x80, 0xfc, 0x53, 0xe4, 0x7f, 0xb3, 0xe3, 0x55, 0x04,
++      0xa9, 0x4a, 0xe9, 0x29, 0x08, 0x9e, 0x4e, 0x63, 0x57, 0xf2, 0x75, 0xe2,
++      0xda, 0xc7, 0xe4, 0x43, 0x5d, 0xe4, 0xda, 0xd3, 0xe8, 0x49, 0x35, 0xe3,
++      0xe5, 0xfd, 0x2d, 0xc4, 0x18, 0xc1, 0x4a, 0xdf, 0x99, 0xcb, 0xf6, 0x66,
++      0x1c, 0x1c, 0x4b, 0x23, 0x75, 0x58, 0x62, 0xa4, 0x9c, 0xc7, 0x92, 0xf8,
++      0xa8, 0x21, 0x9a, 0x38, 0x0d, 0x83, 0x7f, 0xf7, 0x24, 0xb6, 0x21, 0x72,
++      0xf8, 0x6d, 0x72, 0xfc, 0x69, 0xac, 0x1e, 0xd0, 0xd6, 0x1f, 0xc1, 0x34,
++      0xd6, 0x32, 0x7e, 0x26, 0x13, 0x2d, 0x9c, 0xbf, 0x19, 0xbd, 0xfb, 0xbd,
++      0x01, 0x87, 0x6d, 0x0e, 0x63, 0x94, 0x07, 0x3b, 0x27, 0x23, 0x30, 0x46,
++      0xe4, 0x8c, 0x81, 0x0b, 0xc1, 0xb8, 0x47, 0xf9, 0x90, 0x3c, 0xb9, 0x3e,
++      0xee, 0x65, 0x7e, 0xe6, 0x35, 0xd6, 0x2a, 0x3e, 0x4f, 0x9e, 0x4d, 0xfa,
++      0x59, 0x73, 0x70, 0x46, 0x57, 0x50, 0x70, 0xbf, 0x82, 0x10, 0x63, 0x97,
++      0xa7, 0x9a, 0x31, 0x65, 0x44, 0x47, 0xef, 0x10, 0xd7, 0x7b, 0x73, 0xdf,
++      0x64, 0xbf, 0x1e, 0xe1, 0x7c, 0xb2, 0x77, 0x2d, 0xe8, 0x9d, 0xf4, 0x75,
++      0x9c, 0x81, 0xdb, 0xe2, 0x5c, 0xbd, 0x43, 0xb9, 0x7b, 0x50, 0xfc, 0x71,
++      0x83, 0x37, 0x30, 0x47, 0x91, 0x7b, 0x77, 0x10, 0xbf, 0x66, 0xdf, 0x6f,
++      0x28, 0xc9, 0xe5, 0xe4, 0xa5, 0x36, 0xf1, 0x8b, 0x6e, 0xcb, 0x5f, 0x44,
++      0x17, 0xbd, 0xc9, 0x08, 0x6d, 0xfa, 0xc7, 0x66, 0xaa, 0xb5, 0x95, 0x72,
++      0x36, 0x48, 0xaf, 0xc7, 0xe2, 0x26, 0xe7, 0xa5, 0xee, 0xe6, 0x94, 0xd8,
++      0xdd, 0xdd, 0xee, 0xa2, 0x3d, 0xe5, 0x13, 0x9f, 0x0a, 0x26, 0x5c, 0x70,
++      0x1d, 0x29, 0x42, 0xfe, 0xb0, 0xf0, 0x34, 0xa8, 0xa5, 0xcc, 0xfb, 0xe5,
++      0x3c, 0xc3, 0x30, 0x6d, 0xd4, 0x36, 0x41, 0x1f, 0x8b, 0xba, 0xb1, 0x68,
++      0xc2, 0x8d, 0x1f, 0x11, 0x03, 0x6a, 0x26, 0x34, 0x1c, 0x27, 0x06, 0xb8,
++      0x27, 0x02, 0x98, 0x24, 0x06, 0xcc, 0xc9, 0xd6, 0x3e, 0xde, 0x4c, 0xcf,
++      0x9f, 0x8b, 0x42, 0x79, 0x96, 0xe8, 0x31, 0xb7, 0xaf, 0xb2, 0xa7, 0x2d,
++      0xc4, 0x3d, 0xd9, 0xdf, 0x00, 0x76, 0x0f, 0xa5, 0xb1, 0x6a, 0x9f, 0x89,
++      0x9f, 0xeb, 0xf5, 0xee, 0x02, 0x45, 0xf2, 0x04, 0x13, 0x69, 0x5d, 0xce,
++      0x4d, 0x7a, 0xd7, 0xcb, 0xb9, 0xe2, 0xf6, 0x4a, 0x13, 0x79, 0x21, 0xaf,
++      0x4e, 0xb4, 0x5f, 0x5f, 0xa0, 0x48, 0xdc, 0xaa, 0xf7, 0x6c, 0xc1, 0x7c,
++      0x64, 0x7a, 0x65, 0x0f, 0x62, 0x8b, 0xaa, 0xd0, 0x1f, 0x5b, 0xb0, 0xa7,
++      0xcc, 0x70, 0x5d, 0x6b, 0x30, 0xcd, 0x4d, 0xa1, 0xdf, 0x56, 0x59, 0xb5,
++      0x65, 0xdb, 0x1f, 0x71, 0xed, 0x6d, 0x5c, 0xb7, 0xac, 0xbd, 0x03, 0xb1,
++      0xbd, 0x0a, 0xd2, 0xfe, 0x0e, 0x44, 0x47, 0x3b, 0xd0, 0xbf, 0x57, 0x30,
++      0xa1, 0x8f, 0x98, 0x60, 0x76, 0x3d, 0x1b, 0x7a, 0x0c, 0x57, 0x2d, 0x16,
++      0x20, 0x63, 0xbc, 0x01, 0x8f, 0x6d, 0xf6, 0x3e, 0xe4, 0x53, 0xfe, 0x8c,
++      0xef, 0x34, 0x0f, 0x08, 0xa7, 0xf6, 0xf7, 0xf5, 0x72, 0xff, 0x1f, 0x3f,
++      0x24, 0xf1, 0xc6, 0x34, 0xfb, 0xc8, 0x59, 0x51, 0x26, 0x6b, 0xd0, 0xa4,
++      0x3e, 0xfe, 0x71, 0x8d, 0xe6, 0x9b, 0xe9, 0x67, 0x6c, 0xbf, 0xb8, 0xaf,
++      0x7e, 0xcb, 0x16, 0xe1, 0x31, 0xcb, 0x84, 0xdb, 0xa5, 0x71, 0xe1, 0xf0,
++      0x7d, 0x48, 0x3d, 0xce, 0xf5, 0x70, 0xaf, 0x9c, 0xf1, 0x2f, 0x4c, 0xe1,
++      0x72, 0x76, 0x4d, 0x53, 0x8f, 0x12, 0xfb, 0x6c, 0x13, 0x7e, 0xf4, 0x94,
++      0xc1, 0xb8, 0xd6, 0x20, 0xcf, 0xbf, 0x29, 0x3f, 0xd7, 0xdb, 0x8c, 0xfe,
++      0xfd, 0xc2, 0x35, 0x84, 0x97, 0xf9, 0x8c, 0x0f, 0xd0, 0x82, 0xe4, 0x64,
++      0xe6, 0x59, 0xd1, 0xc4, 0x9d, 0xb6, 0x22, 0xfb, 0x7e, 0x1a, 0xbb, 0x69,
++      0x97, 0x2e, 0xce, 0xcf, 0xf8, 0xc2, 0xf9, 0xb4, 0x40, 0x81, 0x3c, 0x6f,
++      0xe2, 0xc7, 0xe6, 0x9e, 0x2a, 0xd1, 0x8d, 0xcc, 0x7f, 0xba, 0x4a, 0x30,
++      0x63, 0x53, 0xe8, 0x0f, 0xad, 0xf5, 0x75, 0xfe, 0xf5, 0xb6, 0x64, 0xf4,
++      0x21, 0xf7, 0x9e, 0xfe, 0x3d, 0xf2, 0x5c, 0xe0, 0x7d, 0x22, 0x53, 0x07,
++      0x76, 0xef, 0x85, 0x51, 0xa8, 0x49, 0xaf, 0xa0, 0x03, 0x7d, 0xd4, 0xef,
++      0xce, 0x64, 0x07, 0x0e, 0xd2, 0x67, 0x87, 0xf5, 0x13, 0x35, 0x36, 0xd4,
++      0xcd, 0xd8, 0x31, 0xf5, 0x93, 0x45, 0xc4, 0xd3, 0x25, 0xcb, 0xfc, 0xf4,
++      0xaf, 0x0e, 0xc4, 0x53, 0x63, 0x73, 0xad, 0x3e, 0x9f, 0x4d, 0xe2, 0x9f,
++      0xe8, 0xa2, 0x13, 0x85, 0x03, 0xa7, 0xe1, 0x1c, 0xe8, 0x44, 0x81, 0xbf,
++      0x09, 0x0f, 0x87, 0x2e, 0x99, 0x57, 0x35, 0x87, 0xfb, 0x24, 0xf5, 0x73,
++      0x22, 0x58, 0xc3, 0x7c, 0x92, 0x39, 0xcc, 0xc8, 0x3c, 0xfa, 0x7e, 0x03,
++      0xf9, 0xae, 0xf4, 0xf4, 0x6d, 0x58, 0xbb, 0x5c, 0x72, 0x75, 0x85, 0xb6,
++      0x5d, 0xcd, 0x5c, 0x53, 0x53, 0x9f, 0xb7, 0xce, 0x5f, 0x90, 0x87, 0x55,
++      0x7a, 0xf0, 0x8c, 0x75, 0xee, 0x40, 0xae, 0x6f, 0x67, 0x8e, 0xb0, 0x1d,
++      0x35, 0x31, 0xc3, 0x14, 0x7d, 0x9f, 0x44, 0xe4, 0x25, 0x1b, 0xe5, 0x68,
++      0x5c, 0xe6, 0xdf, 0x32, 0xa3, 0x88, 0x4d, 0xfb, 0xdb, 0x27, 0x14, 0xdd,
++      0xf5, 0xc8, 0xb8, 0x82, 0xc0, 0x00, 0xe7, 0x0a, 0xfd, 0xf5, 0xdc, 0x4c,
++      0x7d, 0x2c, 0xc7, 0xf9, 0xb6, 0x93, 0x27, 0x6c, 0x47, 0x09, 0xc7, 0xbb,
++      0x35, 0xc1, 0x86, 0xc8, 0x4a, 0xe9, 0xa5, 0xa4, 0x43, 0xfe, 0xd6, 0x62,
++      0x45, 0xf8, 0x90, 0xbf, 0x71, 0xad, 0x22, 0xdc, 0x45, 0xc6, 0xe9, 0xae,
++      0xba, 0xf1, 0x8b, 0xd9, 0x9e, 0x57, 0x03, 0xf1, 0xc1, 0x63, 0x9d, 0x85,
++      0x7c, 0xed, 0xe6, 0x79, 0x89, 0x4c, 0xbd, 0xda, 0x19, 0x97, 0xbc, 0xe2,
++      0x58, 0x68, 0x55, 0xb4, 0x91, 0x58, 0x67, 0x36, 0x8d, 0xd1, 0xee, 0x2f,
++      0xa3, 0x12, 0xff, 0x33, 0x2a, 0xb8, 0xe6, 0xc1, 0xff, 0x8a, 0xe6, 0x4b,
++      0xbe, 0x9c, 0x92, 0x7a, 0xe4, 0xb9, 0xa4, 0x61, 0x52, 0xaf, 0x2d, 0x6b,
++      0x69, 0x4b, 0x81, 0x50, 0x31, 0x50, 0xd5, 0xfd, 0x8c, 0xd3, 0xca, 0xdf,
++      0x4b, 0x50, 0xc6, 0x18, 0x30, 0x30, 0xf2, 0xfb, 0x6a, 0xaf, 0xc4, 0xe1,
++      0x42, 0xa9, 0x81, 0xda, 0xb1, 0x33, 0xf4, 0x2f, 0x66, 0x2a, 0x7b, 0x76,
++      0xf5, 0xc2, 0x5e, 0xb1, 0xd3, 0x00, 0xf2, 0xe3, 0x17, 0x69, 0x93, 0x2a,
++      0xce, 0x47, 0x7d, 0xfa, 0x3a, 0xdb, 0x37, 0x68, 0xff, 0x8b, 0x6e, 0xc3,
++      0xee, 0x45, 0xda, 0xa3, 0x78, 0xda, 0xc2, 0xee, 0x30, 0x7a, 0x18, 0x1b,
++      0xc8, 0xe3, 0x0e, 0x3c, 0x63, 0x53, 0x51, 0x10, 0xf3, 0xa9, 0x3e, 0xe6,
++      0xdb, 0x3d, 0x7c, 0x86, 0x70, 0xcc, 0x0a, 0x72, 0xc0, 0x67, 0xa3, 0xf5,
++      0x9e, 0x5f, 0x63, 0x03, 0xfd, 0x51, 0x9e, 0x21, 0x6b, 0xd2, 0x50, 0xcc,
++      0xbc, 0xf2, 0x14, 0xd7, 0xb1, 0xb3, 0x2c, 0xf3, 0xdc, 0xd2, 0xec, 0xdc,
++      0xf1, 0x11, 0xe1, 0x5f, 0x2b, 0xb0, 0xce, 0x9a, 0x3b, 0x68, 0xf9, 0xe6,
++      0x01, 0x39, 0x5b, 0x5e, 0xa7, 0x21, 0x91, 0x6e, 0xc6, 0xb6, 0xf2, 0x05,
++      0x38, 0x98, 0xd8, 0x8e, 0xa5, 0xe4, 0xc1, 0x4f, 0x96, 0x1b, 0x8c, 0x8d,
++      0xc4, 0xa1, 0xb8, 0xa6, 0xde, 0xa7, 0x3c, 0x90, 0xed, 0x3f, 0x54, 0xc2,
++      0x11, 0x97, 0x98, 0x97, 0x87, 0x41, 0x75, 0x3e, 0x8a, 0xac, 0x33, 0x7f,
++      0x99, 0xb9, 0xfb, 0x47, 0xbc, 0xd9, 0x38, 0x48, 0xd4, 0x88, 0x5b, 0xe7,
++      0x2d, 0x02, 0x2f, 0x90, 0x4b, 0xa4, 0x18, 0x01, 0xf3, 0xc2, 0x5a, 0x6a,
++      0x33, 0x0a, 0x60, 0x54, 0x0b, 0x26, 0xca, 0x98, 0x79, 0x77, 0xc8, 0x54,
++      0x9e, 0x95, 0x29, 0x77, 0x3d, 0xc5, 0x6b, 0x62, 0x5b, 0xc2, 0x2f, 0xe4,
++      0xf7, 0x42, 0xb4, 0xd2, 0x9e, 0x2a, 0x29, 0x73, 0xc2, 0x3a, 0xb7, 0xe9,
++      0xd5, 0x0d, 0x5b, 0x03, 0x3e, 0xdb, 0x97, 0xb1, 0xc1, 0xf5, 0xb5, 0xdc,
++      0xff, 0xd2, 0x06, 0xcc, 0x1c, 0x96, 0x78, 0xf6, 0xfb, 0xcf, 0x52, 0x18,
++      0x37, 0xcf, 0x52, 0x88, 0x5e, 0xbd, 0x67, 0xde, 0x45, 0xfd, 0xd4, 0x53,
++      0xb6, 0xa3, 0x26, 0x2a, 0x44, 0xc7, 0x9b, 0xdd, 0x92, 0x87, 0xda, 0xc8,
++      0x23, 0x8c, 0x74, 0xd2, 0x2d, 0xb1, 0xd2, 0x11, 0x07, 0x16, 0xc5, 0x0d,
++      0xe4, 0x87, 0xb5, 0x03, 0xd7, 0xec, 0x37, 0xcc, 0xf6, 0xea, 0x79, 0xcc,
++      0x03, 0x6f, 0xad, 0xb9, 0x8f, 0xb2, 0xdb, 0xb5, 0x1f, 0x9b, 0x0f, 0x56,
++      0x8a, 0x8c, 0x3f, 0x72, 0x67, 0xea, 0xcc, 0x0b, 0xa9, 0x97, 0x9c, 0x4e,
++      0x4c, 0xda, 0xcf, 0xdf, 0x98, 0x5f, 0xbb, 0xed, 0xba, 0xf0, 0x19, 0xb1,
++      0xd3, 0xd9, 0x67, 0xdb, 0xc4, 0x66, 0x3d, 0xb4, 0xd3, 0x69, 0x8c, 0x25,
++      0x1b, 0x30, 0x90, 0x10, 0x1d, 0x47, 0x70, 0x99, 0xfc, 0xb0, 0x76, 0x70,
++      0x1a, 0xc3, 0xe4, 0x87, 0xbe, 0xb8, 0xf7, 0x00, 0x35, 0x89, 0x6d, 0x6a,
++      0x93, 0xc5, 0x93, 0x5c, 0x5a, 0x4e, 0x86, 0xaf, 0x5a, 0x7a, 0x97, 0x18,
++      0xb3, 0x87, 0xeb, 0xbd, 0x97, 0x3c, 0xa9, 0x39, 0x96, 0x0f, 0xad, 0xac,
++      0x14, 0xc5, 0x9a, 0xf4, 0x2b, 0x32, 0xf7, 0x45, 0x29, 0x4b, 0x91, 0xe6,
++      0xc3, 0x5a, 0xeb, 0x5e, 0x8f, 0x75, 0xae, 0xc1, 0x51, 0x2e, 0x31, 0x58,
++      0xe2, 0x2e, 0xf9, 0xf7, 0x72, 0x89, 0xbb, 0x61, 0xca, 0xb6, 0x98, 0x7b,
++      0xb6, 0x14, 0xee, 0x07, 0x3c, 0xa8, 0x79, 0x80, 0x31, 0x72, 0x89, 0x82,
++      0xf2, 0x25, 0x7e, 0x63, 0xa9, 0xad, 0x19, 0xa8, 0xd6, 0x88, 0x3f, 0x6e,
++      0xb3, 0x27, 0xf1, 0x3b, 0xce, 0xd1, 0x01, 0x73, 0x6f, 0x21, 0x36, 0xec,
++      0x9d, 0x43, 0x5b, 0xf5, 0x48, 0x7d, 0xdd, 0xe5, 0x0a, 0x47, 0x43, 0xae,
++      0x58, 0xbd, 0xee, 0x54, 0x16, 0x33, 0x1e, 0xcb, 0xfe, 0xc9, 0xf3, 0xbf,
++      0x72, 0x1b, 0x5f, 0xaa, 0x60, 0x7c, 0x7b, 0xd2, 0x92, 0x41, 0x6a, 0xc0,
++      0x32, 0xee, 0xdf, 0xee, 0xd3, 0xd4, 0xcd, 0x7d, 0xba, 0x0f, 0x8e, 0x27,
++      0x2a, 0xc9, 0xbf, 0xee, 0x1e, 0x43, 0x0a, 0x18, 0x43, 0xee, 0x8d, 0x99,
++      0x5d, 0x5b, 0x43, 0x45, 0x52, 0x17, 0xb2, 0x62, 0x48, 0xbb, 0x8d, 0x38,
++      0x5a, 0x2a, 0x76, 0xe1, 0xab, 0x21, 0xc6, 0xe9, 0x99, 0xdf, 0xc4, 0x3e,
++      0xac, 0x3a, 0x5e, 0xf6, 0xb7, 0x0e, 0xec, 0x22, 0x66, 0xca, 0xd9, 0x6e,
++      0xa7, 0xa6, 0xd1, 0xff, 0x3b, 0xd0, 0xc3, 0x39, 0x5f, 0x26, 0x6e, 0x0e,
++      0x10, 0x37, 0x6f, 0x2c, 0x3b, 0xf1, 0x93, 0x1a, 0xd4, 0xd1, 0x08, 0xa6,
++      0xfe, 0x5b, 0xb9, 0xe0, 0xe6, 0x52, 0x7f, 0xc7, 0x27, 0x16, 0x6e, 0xca,
++      0xdc, 0x32, 0xdf, 0xec, 0xb9, 0x17, 0xf2, 0xdf, 0x85, 0x52, 0x4b, 0x34,
++      0x9d, 0xda, 0xff, 0x36, 0x77, 0x56, 0x8a, 0xac, 0x77, 0x93, 0x43, 0xb0,
++      0x76, 0x76, 0x4f, 0x7e, 0x9a, 0x98, 0x6b, 0xe5, 0x08, 0x8c, 0xb9, 0x11,
++      0xac, 0x59, 0xae, 0xe2, 0x6a, 0x74, 0x1a, 0x05, 0x87, 0x72, 0xf8, 0x64,
++      0x36, 0x9d, 0x22, 0x36, 0x0d, 0x43, 0xf0, 0xa8, 0x91, 0xfb, 0x62, 0xd0,
++      0x4f, 0x4a, 0x30, 0x91, 0xd4, 0x88, 0x99, 0x26, 0xfa, 0x43, 0x2e, 0x72,
++      0xdb, 0xee, 0x93, 0x79, 0x56, 0x9c, 0x28, 0x21, 0x86, 0xe7, 0x78, 0xb7,
++      0x70, 0x6e, 0xc1, 0x1f, 0xe6, 0x18, 0x23, 0x76, 0xe4, 0x2d, 0x93, 0xbc,
++      0xe2, 0x73, 0xf3, 0x42, 0x9b, 0xdc, 0xb7, 0x00, 0xc3, 0x7b, 0xc5, 0xfe,
++      0x7c, 0xa8, 0xd1, 0x2e, 0x32, 0xcf, 0x00, 0xde, 0x8f, 0xda, 0xee, 0x71,
++      0x91, 0x1b, 0x77, 0xe9, 0xcb, 0x71, 0xa3, 0xa2, 0x87, 0x3e, 0xef, 0xe6,
++      0x6f, 0x53, 0x38, 0x12, 0x75, 0x21, 0xcf, 0xd2, 0x69, 0x29, 0xd7, 0x90,
++      0xb1, 0xa1, 0x9d, 0xb4, 0xa1, 0x7c, 0xe6, 0x6f, 0x0f, 0x5b, 0xbe, 0x2a,
++      0xf3, 0x4c, 0xe3, 0x15, 0x72, 0x5a, 0x6d, 0xb9, 0xf0, 0xd9, 0x20, 0xe3,
++      0x62, 0x09, 0xe2, 0x03, 0x5d, 0x38, 0x1f, 0x2a, 0x41, 0xec, 0x90, 0xf8,
++      0xd8, 0x02, 0xc1, 0x52, 0x3e, 0xb7, 0x91, 0x3a, 0x51, 0x89, 0x35, 0xf5,
++      0x9d, 0x76, 0x7b, 0x09, 0x2e, 0x95, 0x31, 0xaf, 0xb5, 0xde, 0xe3, 0x69,
++      0xc5, 0xc1, 0xac, 0x5d, 0xa8, 0xb4, 0x8b, 0xd6, 0x9b, 0x3c, 0x3a, 0xb7,
++      0x96, 0x9c, 0xcf, 0x66, 0xfa, 0xe1, 0xbd, 0xe4, 0x36, 0x2f, 0x4b, 0xfd,
++      0xc8, 0xe6, 0x63, 0x2c, 0x61, 0xce, 0x34, 0x29, 0xfa, 0xfd, 0xeb, 0xb9,
++      0x19, 0xac, 0x78, 0xa5, 0x26, 0x73, 0x76, 0x25, 0xa7, 0xf7, 0xdc, 0x77,
++      0x6d, 0x7d, 0xa1, 0xf2, 0x0b, 0x73, 0x6b, 0x95, 0xc8, 0x77, 0x9d, 0x79,
++      0xda, 0x77, 0xf9, 0xfb, 0x2a, 0xf4, 0x8e, 0xcc, 0x8e, 0x15, 0xe2, 0x87,
++      0x9e, 0xdb, 0xce, 0xd5, 0x95, 0xc5, 0xe5, 0xdd, 0xa9, 0x63, 0xa1, 0x67,
++      0xb8, 0x0f, 0xfe, 0xa5, 0xf5, 0x56, 0xdd, 0x85, 0xdc, 0x97, 0x79, 0x89,
++      0x60, 0xac, 0xc1, 0x18, 0x5f, 0x82, 0x9f, 0x26, 0x25, 0xe6, 0x9a, 0xc8,
++      0xa7, 0xfd, 0x5d, 0xaa, 0xec, 0x7e, 0xbe, 0xcc, 0xe2, 0xd2, 0x25, 0x28,
++      0xa7, 0xbd, 0x0f, 0x8e, 0xdc, 0xcd, 0xb6, 0x6f, 0xc5, 0x85, 0x74, 0x48,
++      0x21, 0x4e, 0xfc, 0x8b, 0xd9, 0xff, 0xf5, 0xcc, 0x98, 0x0b, 0x49, 0x17,
++      0x3e, 0x0a, 0xb5, 0x63, 0xaa, 0x2c, 0x8c, 0xa1, 0x44, 0x01, 0xda, 0xab,
++      0xeb, 0xac, 0x77, 0x0a, 0x6a, 0xe2, 0x1e, 0x5c, 0x8c, 0x3a, 0xd1, 0x38,
++      0xd7, 0x63, 0xd5, 0xd3, 0x6c, 0xf4, 0x85, 0x77, 0xa2, 0x11, 0xcb, 0xe7,
++      0x66, 0xc7, 0x8c, 0x3c, 0x6d, 0x19, 0x1e, 0xca, 0xe2, 0xfa, 0xc1, 0xc4,
++      0xe7, 0xc4, 0x9d, 0x52, 0xa3, 0x22, 0x5c, 0x82, 0x7b, 0x87, 0x0c, 0xc1,
++      0x64, 0xa3, 0x24, 0xac, 0xcd, 0xdc, 0xa7, 0x94, 0xa0, 0x69, 0x44, 0x30,
++      0x5e, 0x7c, 0x35, 0x4d, 0x5f, 0x6d, 0xe3, 0x1e, 0x75, 0xa2, 0x6e, 0xbf,
++      0xa5, 0x57, 0xd5, 0xae, 0x98, 0x5d, 0x57, 0xf4, 0x88, 0xce, 0x18, 0xd7,
++      0xf9, 0x10, 0xed, 0x7e, 0x26, 0xe4, 0x6d, 0xaf, 0xb0, 0x6b, 0x1d, 0xef,
++      0x29, 0x41, 0x4c, 0x8c, 0x03, 0x03, 0x87, 0x03, 0xf8, 0x20, 0x21, 0x9c,
++      0x3f, 0x80, 0x5f, 0x4d, 0x06, 0xf1, 0x2e, 0x63, 0x53, 0x41, 0xdc, 0x1b,
++      0x79, 0x8e, 0x39, 0xdd, 0xfb, 0xfc, 0x9e, 0x1f, 0xd7, 0x71, 0x8d, 0xfa,
++      0x73, 0xc6, 0x1b, 0x70, 0x65, 0xf2, 0x01, 0x5c, 0xdd, 0xaf, 0xe0, 0x84,
++      0xf6, 0x00, 0x2e, 0x8f, 0x75, 0x62, 0xd9, 0x7e, 0x39, 0x87, 0x76, 0x2c,
++      0xa4, 0x32, 0x36, 0x3c, 0x53, 0x6b, 0x76, 0xbd, 0xa8, 0xd7, 0x41, 0x2f,
++      0xf7, 0xea, 0xed, 0xcc, 0x99, 0x04, 0xd3, 0x23, 0x36, 0xd9, 0x33, 0xd9,
++      0xbb, 0x4e, 0x5c, 0xb5, 0x70, 0xfc, 0xee, 0xd8, 0x70, 0x0b, 0xc3, 0xe5,
++      0x39, 0x82, 0x27, 0x0b, 0xf1, 0x7d, 0x26, 0xab, 0x3d, 0xbc, 0xcf, 0x45,
++      0xec, 0x7b, 0x36, 0x5a, 0x80, 0xfc, 0xaa, 0x52, 0x2b, 0x97, 0x29, 0x8c,
++      0x07, 0x70, 0x96, 0xba, 0x5b, 0x53, 0xe5, 0xe5, 0x77, 0x89, 0xbb, 0x41,
++      0xe6, 0x2d, 0x15, 0xf8, 0xe0, 0xb6, 0x78, 0xfb, 0x7d, 0xf3, 0x49, 0x0b,
++      0x9f, 0xeb, 0xe7, 0x09, 0xff, 0x7a, 0x3d, 0xf1, 0xeb, 0x1a, 0xc1, 0x69,
++      0xa9, 0x21, 0x96, 0x6a, 0xda, 0x96, 0xbf, 0x80, 0xbc, 0x6f, 0x75, 0xe2,
++      0x3f, 0x17, 0x93, 0x17, 0xbf, 0x18, 0xaa, 0x33, 0xca, 0xa0, 0xf1, 0xbe,
++      0xa9, 0x65, 0x2a, 0x56, 0xf1, 0xaf, 0x9f, 0xf7, 0x05, 0x29, 0xc7, 0x75,
++      0x33, 0xa5, 0xfa, 0xf8, 0xef, 0x05, 0x8c, 0xef, 0xdb, 0x71, 0x3e, 0x56,
++      0xdf, 0x7e, 0x58, 0xb9, 0x66, 0x1a, 0x55, 0xb5, 0xfc, 0xad, 0x12, 0x17,
++      0xa2, 0xde, 0xa9, 0x31, 0xd4, 0x7b, 0x66, 0x94, 0x83, 0xa6, 0xa1, 0xca,
++      0xfe, 0xc8, 0x7a, 0x65, 0xfc, 0x62, 0x5e, 0xbf, 0x34, 0xcb, 0x0e, 0x6f,
++      0xe5, 0x5d, 0xce, 0x9b, 0xf6, 0x27, 0xbc, 0xc4, 0x6c, 0x1a, 0xd5, 0xeb,
++      0xd5, 0x1e, 0x62, 0x41, 0x44, 0xbd, 0x9b, 0xfd, 0x15, 0xd0, 0xfe, 0xc2,
++      0xcc, 0x23, 0x4b, 0xa0, 0x5a, 0xf1, 0xa9, 0x15, 0xc9, 0x91, 0xd9, 0xdc,
++      0x52, 0xec, 0x2e, 0xc3, 0x53, 0xdb, 0xcb, 0xba, 0x4f, 0x3a, 0x89, 0x45,
++      0x09, 0xe2, 0x78, 0x9c, 0x38, 0x9e, 0x4f, 0x1c, 0xbf, 0xbe, 0xaf, 0x10,
++      0xe7, 0xf7, 0x35, 0x22, 0x5d, 0x26, 0x63, 0xec, 0x70, 0x72, 0x75, 0xa9,
++      0xec, 0x79, 0x85, 0x9a, 0xc1, 0x95, 0x72, 0x8e, 0x13, 0x82, 0x5f, 0x79,
++      0x71, 0xe6, 0x59, 0xad, 0x76, 0x38, 0xac, 0x33, 0xf6, 0x73, 0x6e, 0xb3,
++      0x3f, 0x97, 0x96, 0x8f, 0x96, 0x4a, 0xc1, 0x87, 0xd7, 0xe7, 0x49, 0x1c,
++      0x7d, 0x9d, 0xb2, 0x9c, 0xa4, 0x4d, 0x6f, 0xd4, 0x57, 0x48, 0x5f, 0x8f,
++      0xf7, 0xcb, 0x38, 0xc9, 0x6d, 0x4c, 0xec, 0xa6, 0x85, 0xd5, 0x55, 0x99,
++      0x48, 0xe8, 0x61, 0xc6, 0xac, 0x10, 0x22, 0x65, 0x41, 0xc6, 0x2a, 0xf9,
++      0xae, 0xe2, 0x0a, 0xf3, 0xb2, 0xf1, 0xa0, 0x82, 0x8f, 0xbe, 0x22, 0x5c,
++      0xc0, 0xaf, 0x9f, 0x57, 0x84, 0x0b, 0xc8, 0x78, 0xc1, 0x88, 0x52, 0x0b,
++      0x23, 0xf2, 0x2d, 0x5e, 0x34, 0xd7, 0xc2, 0x16, 0x79, 0x47, 0xa9, 0x86,
++      0x71, 0xe7, 0xfe, 0x44, 0xfd, 0x94, 0xcf, 0x4e, 0x8e, 0xf6, 0x27, 0x5f,
++      0x21, 0x37, 0xb3, 0x38, 0x02, 0xf1, 0x3e, 0x87, 0x0d, 0x72, 0xee, 0x76,
++      0xb6, 0x3e, 0x72, 0xe7, 0x72, 0x3d, 0x19, 0xac, 0x2c, 0x15, 0x2e, 0xf7,
++      0xff, 0xcc, 0xd6, 0xdb, 0xe4, 0xcf, 0xe1, 0xc8, 0x3f, 0xf0, 0xbb, 0x8c,
++      0x17, 0xbf, 0xa3, 0x5d, 0xc4, 0x7f, 0x62, 0x3e, 0x6d, 0xf1, 0xb9, 0x97,
++      0xe7, 0xc9, 0xf9, 0x43, 0xc7, 0xe0, 0xd0, 0x3c, 0x39, 0x6f, 0x65, 0x9b,
++      0xc5, 0x0b, 0x32, 0xb1, 0xf6, 0x5d, 0x73, 0xad, 0x25, 0xeb, 0x91, 0xec,
++      0x7d, 0x92, 0x43, 0x8b, 0x2c, 0x0a, 0x5e, 0xd1, 0xea, 0xd5, 0xb3, 0x28,
++      0x16, 0x3c, 0x89, 0x48, 0x0f, 0xb3, 0x50, 0xf3, 0xb9, 0x8f, 0xf0, 0x6f,
++      0x3f, 0xaf, 0xbf, 0xa1, 0x39, 0x1a, 0xb7, 0x42, 0xfa, 0xb6, 0x36, 0xee,
++      0x55, 0xbd, 0xfb, 0x2c, 0xfc, 0x91, 0x7c, 0x65, 0xc6, 0x6c, 0xaf, 0x94,
++      0x7b, 0x32, 0xfd, 0x5b, 0x28, 0x17, 0xad, 0xfa, 0x49, 0xc6, 0x66, 0x16,
++      0xd0, 0x66, 0x04, 0xbb, 0x84, 0x8b, 0x2c, 0xe1, 0xda, 0x55, 0x8c, 0x4c,
++      0x02, 0x79, 0x83, 0x2e, 0x8b, 0x1b, 0xa9, 0xb5, 0xb5, 0x9e, 0xcd, 0xf8,
++      0xe7, 0x79, 0xf2, 0xee, 0xd1, 0x0e, 0x1d, 0xf7, 0xd8, 0xf0, 0xf6, 0x3d,
++      0xb6, 0xf0, 0xca, 0x6f, 0x3d, 0xd4, 0x90, 0x37, 0x5f, 0xde, 0xff, 0x20,
++      0xc3, 0x93, 0xfa, 0xad, 0x5b, 0x7a, 0x8d, 0xab, 0x19, 0xc3, 0x86, 0x99,
++      0xe3, 0xaf, 0x0e, 0xfe, 0xd6, 0xfc, 0xa6, 0x23, 0xe2, 0xb1, 0xa3, 0xd6,
++      0xd3, 0x8b, 0x1b, 0x66, 0xaa, 0x52, 0xae, 0xcb, 0x1c, 0xf2, 0x6e, 0xa1,
++      0xf4, 0x4b, 0x4c, 0xf3, 0xde, 0x5a, 0x93, 0xf9, 0xb3, 0x6d, 0x95, 0x9d,
++      0x7e, 0x91, 0xaf, 0x5d, 0x36, 0xeb, 0xaa, 0x6b, 0xdd, 0x36, 0xa5, 0x8e,
++      0xd6, 0x51, 0x89, 0x57, 0x69, 0xbf, 0xaf, 0x4e, 0x4a, 0xcc, 0x53, 0x71,
++      0x94, 0x7e, 0x3a, 0x56, 0xe7, 0xeb, 0xbc, 0xca, 0x5c, 0xf2, 0x43, 0x72,
++      0xfc, 0x37, 0x35, 0x6f, 0xfb, 0x19, 0xa9, 0x3b, 0x86, 0x1c, 0x38, 0x17,
++      0xbc, 0x61, 0xd5, 0x82, 0x63, 0x87, 0x54, 0x0c, 0x27, 0x32, 0xfe, 0xfe,
++      0x1a, 0xfd, 0xf8, 0xd6, 0xd9, 0x05, 0x1d, 0x3d, 0x43, 0xe2, 0x1f, 0x0d,
++      0x96, 0x1f, 0xdd, 0xaa, 0x15, 0x09, 0x5e, 0x8b, 0x5f, 0x6c, 0x90, 0xde,
++      0x9d, 0x91, 0x02, 0xb9, 0xcc, 0xe0, 0x6a, 0x72, 0x60, 0x89, 0xb1, 0x01,
++      0xe6, 0xbb, 0x0e, 0xfa, 0xcf, 0x19, 0xe6, 0x1e, 0x94, 0x2d, 0x6c, 0x9a,
++      0xef, 0x32, 0x17, 0x1b, 0x41, 0xbd, 0x7a, 0x0a, 0xeb, 0xc8, 0x63, 0xc9,
++      0x71, 0x26, 0x9b, 0xb1, 0xc7, 0xca, 0xa5, 0x7c, 0xea, 0xc3, 0xca, 0x52,
++      0xae, 0xbf, 0x19, 0xdd, 0x63, 0x0b, 0x70, 0x80, 0xeb, 0x7a, 0x44, 0xff,
++      0x2b, 0x94, 0x0f, 0x75, 0x77, 0x96, 0x53, 0x1f, 0x9f, 0x86, 0x8c, 0x0e,
++      0x62, 0xfa, 0x96, 0x53, 0x4a, 0xfd, 0xfa, 0x98, 0xf2, 0x4d, 0xee, 0x87,
++      0xd4, 0x47, 0x3c, 0xcc, 0xd3, 0x1f, 0x61, 0x3c, 0xfb, 0x33, 0xec, 0x56,
++      0x95, 0x26, 0x5b, 0x58, 0x38, 0x22, 0xfc, 0xaa, 0x75, 0x76, 0xf0, 0xbf,
++      0x40, 0x9f, 0xdb, 0xc0, 0x6b, 0x12, 0xd7, 0xe5, 0x5e, 0x39, 0x37, 0xde,
++      0x89, 0x93, 0x69, 0xda, 0x75, 0xb4, 0x0f, 0xa7, 0xd2, 0xf2, 0x4c, 0xe1,
++      0x58, 0x01, 0xc4, 0x86, 0xec, 0x98, 0xd0, 0x7d, 0x91, 0x52, 0xea, 0xa5,
++      0x30, 0xe4, 0x8d, 0xac, 0x53, 0x02, 0xe4, 0x72, 0x69, 0x9c, 0xdb, 0xeb,
++      0x6d, 0xaf, 0x63, 0xde, 0x18, 0x9d, 0x84, 0xfa, 0xdc, 0xf2, 0x34, 0xce,
++      0x8e, 0x3e, 0x0e, 0x4f, 0xb5, 0xd7, 0xb3, 0x5a, 0x69, 0xc1, 0x8e, 0xc9,
++      0x7f, 0xaf, 0xc6, 0xe4, 0xe1, 0xb3, 0x5b, 0x60, 0x50, 0xf7, 0xbb, 0xf0,
++      0xad, 0xf9, 0xe2, 0xf3, 0xbd, 0x93, 0xc5, 0x58, 0xc4, 0x78, 0xf4, 0xb2,
++      0x15, 0x67, 0x33, 0x7e, 0x54, 0xa3, 0x7d, 0x64, 0x3e, 0x95, 0x8d, 0xe1,
++      0x7f, 0x58, 0x5f, 0x3f, 0x34, 0x23, 0xaa, 0xe8, 0x4b, 0xc6, 0xd5, 0xa0,
++      0x80, 0xf3, 0xec, 0xce, 0xc6, 0xeb, 0x32, 0xed, 0x9f, 0xcc, 0xc7, 0xad,
++      0x39, 0x56, 0xce, 0x97, 0x44, 0x61, 0xa7, 0x95, 0xe7, 0xcb, 0xba, 0x75,
++      0x7c, 0x16, 0x95, 0x5a, 0x87, 0x8a, 0x53, 0xba, 0xe0, 0x48, 0x0b, 0x7d,
++      0xd5, 0x89, 0x2d, 0x41, 0xba, 0xa3, 0x55, 0xf7, 0x9f, 0xc6, 0x9e, 0xe4,
++      0xbf, 0x9a, 0xcf, 0xd3, 0x8e, 0xd6, 0x90, 0xc3, 0x78, 0x88, 0x03, 0x1b,
++      0x43, 0x8f, 0x90, 0x87, 0x72, 0xcd, 0x09, 0x07, 0x31, 0x48, 0x41, 0xa2,
++      0x91, 0xfe, 0x1f, 0x5a, 0x82, 0x29, 0xeb, 0xfe, 0x4f, 0xe7, 0x65, 0x6a,
++      0x8b, 0x67, 0xe6, 0x67, 0x72, 0x43, 0xd1, 0xff, 0x7f, 0x44, 0x7f, 0xaf,
++      0x99, 0x9e, 0x72, 0xd1, 0x9f, 0x03, 0x6e, 0xc6, 0xad, 0x03, 0xbc, 0xe7,
++      0xc2, 0x5e, 0x07, 0x06, 0xb5, 0x16, 0x0c, 0x4e, 0xc2, 0xf3, 0x29, 0xef,
++      0xf9, 0xf9, 0x68, 0xc7, 0xfc, 0x0c, 0x57, 0x78, 0x1b, 0xdd, 0xd1, 0x17,
++      0xcc, 0x55, 0xe5, 0xb2, 0x5e, 0x39, 0xaf, 0xd3, 0xca, 0xfb, 0x73, 0x75,
++      0xbe, 0xcd, 0xe6, 0x13, 0x56, 0x9c, 0x78, 0x71, 0xbe, 0xf4, 0xd7, 0x5e,
++      0x4f, 0x98, 0xb8, 0xa2, 0xf7, 0x58, 0xb9, 0xb9, 0x60, 0x43, 0x6f, 0x42,
++      0xf6, 0x56, 0x64, 0xfb, 0x66, 0x56, 0x1f, 0x13, 0x55, 0xb7, 0xcb, 0xbd,
++      0x2a, 0x6b, 0xcb, 0xd2, 0xdf, 0xce, 0xf1, 0x7e, 0xb1, 0x65, 0xb1, 0x63,
++      0xeb, 0xbd, 0x96, 0xa4, 0xbc, 0xd3, 0xb9, 0x41, 0xfd, 0x1d, 0x9f, 0x21,
++      0x75, 0x96, 0x16, 0xce, 0x61, 0x9a, 0x9b, 0xf5, 0x7a, 0xcf, 0x29, 0xfc,
++      0x31, 0x6d, 0x5b, 0xc7, 0xae, 0x21, 0xa9, 0xc3, 0x7a, 0x14, 0xc7, 0xbe,
++      0x75, 0xb8, 0xc2, 0xf8, 0xbf, 0xc7, 0xb2, 0x43, 0xc1, 0x15, 0x91, 0x43,
++      0xb0, 0xa5, 0x8d, 0x71, 0x5c, 0x6a, 0xdd, 0x46, 0xa4, 0x26, 0xdc, 0xa9,
++      0x7c, 0x58, 0xd7, 0x89, 0x63, 0x21, 0xc3, 0x2c, 0xd5, 0xfc, 0xeb, 0x6b,
++      0x6c, 0x28, 0x98, 0x6c, 0xc8, 0xc7, 0xf1, 0x90, 0xf0, 0x47, 0xb8, 0xd2,
++      0x69, 0xaf, 0x31, 0xc7, 0xae, 0xba, 0xbe, 0x97, 0xce, 0x62, 0xa5, 0xad,
++      0x7e, 0xbe, 0xe4, 0x50, 0x49, 0x0b, 0x47, 0xbe, 0x8a, 0x07, 0xad, 0xbd,
++      0x55, 0x19, 0x43, 0xa5, 0x0e, 0x7c, 0x2c, 0x74, 0x2d, 0x2a, 0x98, 0x62,
++      0x36, 0x35, 0x87, 0xea, 0xd5, 0x5d, 0xb8, 0x87, 0xd8, 0xd5, 0x84, 0x73,
++      0xba, 0xf4, 0x3f, 0x8c, 0x6f, 0x3a, 0xac, 0xb3, 0x34, 0x47, 0x43, 0x3b,
++      0xa2, 0x2b, 0x71, 0x60, 0xc8, 0x50, 0x9c, 0x61, 0x6f, 0x24, 0x46, 0x2e,
++      0xc4, 0x1c, 0xdd, 0xaa, 0x03, 0x4a, 0x8d, 0x61, 0xb8, 0xa1, 0x13, 0xbb,
++      0xf4, 0x7c, 0xf4, 0xea, 0x91, 0x82, 0x9e, 0xe5, 0x5d, 0x38, 0xa8, 0x17,
++      0x1b, 0x8b, 0xc2, 0x06, 0x31, 0x5d, 0xdb, 0x92, 0x84, 0xbf, 0xe5, 0x32,
++      0x39, 0xc7, 0x49, 0x78, 0x3b, 0x9a, 0xec, 0xc4, 0xdc, 0x15, 0x0e, 0x57,
++      0x6c, 0xbc, 0x11, 0x89, 0xc9, 0x4a, 0xd7, 0xee, 0xf1, 0x20, 0xe2, 0x93,
++      0xdc, 0x6f, 0xe6, 0xba, 0x8e, 0xf1, 0x95, 0xe4, 0xa0, 0xa2, 0x47, 0x3b,
++      0x6d, 0xb1, 0x0e, 0xcf, 0xb5, 0x5e, 0x32, 0x9f, 0xf1, 0x0b, 0x7e, 0x2e,
++      0xc0, 0x56, 0xd5, 0x67, 0x71, 0xca, 0x88, 0xed, 0x0f, 0xf9, 0x87, 0x9d,
++      0x36, 0xf7, 0x7d, 0xd3, 0xf3, 0x75, 0xd1, 0x9b, 0x63, 0x01, 0x0a, 0x1f,
++      0x21, 0x7e, 0xca, 0xbf, 0x45, 0x77, 0xa2, 0x43, 0x13, 0x9b, 0x74, 0xa9,
++      0xf1, 0x35, 0xd0, 0x67, 0xdc, 0x78, 0x47, 0xbd, 0xb5, 0x0f, 0xcf, 0xea,
++      0x3e, 0x7d, 0x0c, 0x52, 0xdb, 0x5b, 0xc1, 0x71, 0x52, 0x83, 0x69, 0xc4,
++      0x4b, 0xd9, 0x9c, 0xc3, 0x63, 0x2b, 0x22, 0xee, 0xe6, 0xe2, 0x88, 0x5c,
++      0xf7, 0x26, 0x23, 0xb4, 0xd3, 0x6d, 0xc1, 0x19, 0x33, 0x52, 0x6e, 0x74,
++      0xca, 0xf9, 0x15, 0x77, 0x78, 0xba, 0xd3, 0x5d, 0xe7, 0xed, 0x98, 0x51,
++      0x80, 0x73, 0x31, 0xc6, 0x61, 0xeb, 0x7f, 0xb1, 0x28, 0x73, 0x3b, 0x31,
++      0x12, 0x5c, 0x88, 0xf6, 0x36, 0x79, 0x56, 0x33, 0xfa, 0xf6, 0x9b, 0x66,
++      0x71, 0xc8, 0xa7, 0xa6, 0xe1, 0xc4, 0xc3, 0x41, 0x3b, 0x2e, 0xa9, 0x26,
++      0x1c, 0xa1, 0x7f, 0x35, 0xc7, 0x19, 0x1f, 0x47, 0xe9, 0x27, 0xbb, 0x69,
++      0x63, 0xf2, 0xbe, 0x8f, 0x9f, 0x7e, 0x12, 0xa7, 0x9f, 0x9c, 0x0b, 0xdd,
++      0x97, 0x7d, 0x5f, 0x50, 0x23, 0xaf, 0x98, 0x46, 0xd3, 0x90, 0x8a, 0x4f,
++      0x57, 0x4c, 0x23, 0x34, 0x92, 0x93, 0x5d, 0xfc, 0x32, 0x27, 0xbf, 0xf4,
++      0x11, 0x45, 0x76, 0x91, 0x51, 0xd6, 0x22, 0xff, 0xce, 0x5d, 0xcb, 0xfd,
++      0x26, 0x71, 0xd6, 0x89, 0x56, 0x6b, 0x6d, 0x7f, 0x56, 0x93, 0xc1, 0x8c,
++      0xdc, 0x9a, 0x2e, 0xb9, 0x6f, 0xff, 0x7e, 0xe2, 0x8e, 0xeb, 0x2b, 0xee,
++      0xb8, 0xbe, 0x71, 0xde, 0xed, 0xdf, 0x73, 0x3e, 0x71, 0x4b, 0xaf, 0x1d,
++      0xba, 0x6f, 0xea, 0x18, 0xd7, 0x3a, 0x67, 0xc9, 0x98, 0x79, 0xa9, 0x4c,
++      0x64, 0x91, 0x3c, 0x36, 0x23, 0xeb, 0xaa, 0xf1, 0xd9, 0xb2, 0xbe, 0x95,
++      0xed, 0x19, 0x58, 0x67, 0x7c, 0xe9, 0x37, 0x1a, 0x7e, 0x78, 0xdb, 0xb9,
++      0x43, 0xb1, 0xb5, 0x80, 0xd2, 0x17, 0x93, 0xf7, 0x33, 0x0b, 0xad, 0x77,
++      0xac, 0x55, 0xbf, 0x81, 0x22, 0xbf, 0xb6, 0x65, 0x8e, 0xad, 0x0b, 0xce,
++      0xa5, 0x5a, 0xc7, 0xb7, 0x94, 0x24, 0xe2, 0xe3, 0xde, 0xc0, 0x18, 0x75,
++      0x15, 0x1b, 0xbf, 0xce, 0x5c, 0xbb, 0x0b, 0xcf, 0x85, 0x1c, 0x46, 0x61,
++      0x58, 0xce, 0x82, 0xae, 0xc2, 0xae, 0x91, 0xbf, 0xc2, 0xe6, 0xa4, 0x70,
++      0xfc, 0x05, 0xe8, 0x99, 0xb4, 0xe1, 0x04, 0xed, 0xbb, 0x8f, 0xcf, 0x21,
++      0xfe, 0xb9, 0x53, 0x90, 0xf7, 0x6b, 0x1a, 0x98, 0x37, 0xeb, 0xd6, 0x67,
++      0xc7, 0xc8, 0xcf, 0xb0, 0x39, 0x6a, 0xe2, 0x53, 0x9d, 0xb1, 0x47, 0x13,
++      0xf9, 0x1c, 0xd0, 0xca, 0x5b, 0x2d, 0x2c, 0x7d, 0x32, 0xce, 0xfd, 0xac,
++      0x16, 0x5f, 0x5d, 0x49, 0x9f, 0x55, 0xf0, 0x99, 0xf4, 0x27, 0xcb, 0x29,
++      0x33, 0xb9, 0xe1, 0xf1, 0xe8, 0x76, 0x8c, 0x5a, 0xfd, 0x67, 0xad, 0xaf,
++      0xc6, 0x1e, 0x79, 0xb1, 0x8c, 0x3c, 0x3b, 0xa1, 0xfb, 0xdb, 0x2f, 0x28,
++      0xf0, 0x94, 0x84, 0xfd, 0x8c, 0x33, 0x5f, 0xe2, 0x37, 0xba, 0xd4, 0xd8,
++      0x74, 0xd7, 0x5a, 0xda, 0xfb, 0xbe, 0x91, 0x80, 0x55, 0x33, 0xf8, 0xe1,
++      0x5d, 0x6b, 0x1a, 0x99, 0x77, 0xab, 0x33, 0xf5, 0xc7, 0x9f, 0xe1, 0x48,
++      0xda, 0x85, 0xa7, 0xe2, 0x1e, 0x65, 0xd1, 0x3e, 0x15, 0x0f, 0xc5, 0xbd,
++      0x53, 0x4d, 0x76, 0xf2, 0x8f, 0x65, 0x73, 0x38, 0x9f, 0x82, 0x1f, 0x2c,
++      0x95, 0x58, 0xf0, 0x47, 0x30, 0xaa, 0x23, 0x9c, 0x13, 0xc5, 0x79, 0xcb,
++      0xbd, 0xea, 0x11, 0x9b, 0xcf, 0xfd, 0x1b, 0xec, 0x80, 0x7d, 0xfc, 0x11,
++      0x74, 0x53, 0xfe, 0x35, 0x71, 0xe9, 0x69, 0xd5, 0x03, 0x65, 0xcd, 0xd8,
++      0x3d, 0x26, 0xbe, 0x09, 0xa3, 0x2a, 0x0c, 0x4f, 0x65, 0xd8, 0xbf, 0x10,
++      0x85, 0x5f, 0x92, 0x6b, 0x4f, 0x4b, 0xfe, 0xb9, 0xa5, 0xd4, 0x66, 0x32,
++      0x7f, 0xb9, 0x2f, 0xdb, 0xab, 0x58, 0x89, 0x1d, 0x43, 0x52, 0x87, 0x27,
++      0x6e, 0xeb, 0xcc, 0x83, 0xca, 0xb4, 0xc0, 0x46, 0x9b, 0xf4, 0x87, 0xb6,
++      0xc3, 0x17, 0xdb, 0x8e, 0x40, 0x4c, 0x7c, 0x56, 0x53, 0x3b, 0x10, 0x39,
++      0x2b, 0xb5, 0xbf, 0x45, 0x21, 0x3f, 0xe5, 0xf2, 0xf7, 0x55, 0xda, 0x75,
++      0xd7, 0x6b, 0x13, 0x2a, 0xa6, 0xd4, 0x4c, 0x1e, 0x39, 0x96, 0xd4, 0xd6,
++      0xe7, 0xdb, 0xe4, 0x0c, 0xc5, 0x55, 0xeb, 0x3d, 0xeb, 0x88, 0xed, 0x9f,
++      0x89, 0x47, 0xcd, 0x18, 0xd8, 0xff, 0x3e, 0x63, 0x90, 0x3c, 0xe3, 0x77,
++      0xcc, 0xaf, 0x9d, 0x58, 0xdd, 0xe6, 0xc1, 0x83, 0x71, 0xa9, 0x9d, 0xae,
++      0xaf, 0xca, 0x9c, 0x01, 0x91, 0xef, 0x0e, 0x74, 0xe8, 0x04, 0xd9, 0xea,
++      0x2f, 0xcc, 0x4a, 0x2b, 0x2f, 0xfd, 0xbf, 0x19, 0x9b, 0x49, 0xe4, 0x2d,
++      0x14, 0x1f, 0xef, 0x9d, 0x64, 0x02, 0x69, 0xd9, 0x5d, 0x15, 0xbf, 0xcb,
++      0x5c, 0xda, 0x81, 0xed, 0xd8, 0x56, 0x25, 0x7c, 0xe6, 0xc9, 0x89, 0xd9,
++      0xf7, 0xe7, 0xea, 0x32, 0x95, 0x59, 0x4e, 0x95, 0xb3, 0x37, 0xe9, 0x05,
++      0x46, 0x94, 0x27, 0xa2, 0x2d, 0xca, 0xda, 0xa8, 0xf4, 0x03, 0x6d, 0xd1,
++      0x22, 0x72, 0x18, 0xdf, 0x52, 0x13, 0xdf, 0x0e, 0x1d, 0x57, 0x76, 0x5a,
++      0xe7, 0x66, 0xe5, 0xac, 0x2b, 0x50, 0x3e, 0xd1, 0xac, 0xec, 0x8a, 0x7e,
++      0x62, 0x6e, 0xb4, 0x7a, 0xf0, 0x79, 0xd6, 0x79, 0x9c, 0xfc, 0x09, 0x17,
++      0xca, 0x8e, 0xc8, 0xf9, 0x41, 0x0d, 0x15, 0x13, 0x8f, 0x91, 0xb7, 0x0a,
++      0xd7, 0x31, 0x5a, 0x1c, 0xd6, 0xb9, 0xb6, 0xe6, 0x97, 0x72, 0xe7, 0xda,
++      0x1c, 0x31, 0x79, 0x1b, 0xd9, 0xfa, 0x8f, 0xb9, 0xd2, 0x51, 0xe6, 0x4a,
++      0x66, 0xd3, 0xb7, 0x43, 0xc6, 0xee, 0x0a, 0x78, 0x03, 0xe5, 0x36, 0xc3,
++      0x94, 0x7a, 0xce, 0x6b, 0x24, 0x8c, 0xeb, 0x6a, 0x0d, 0x3c, 0x5c, 0x2b,
++      0xef, 0x1f, 0xca, 0xbb, 0xc7, 0x5d, 0x38, 0x1a, 0xea, 0xc2, 0x2f, 0xf5,
++      0x2e, 0xec, 0xd1, 0xe5, 0x4c, 0x43, 0x31, 0x65, 0xd5, 0xa6, 0xa2, 0xd0,
++      0xf4, 0xb4, 0xa2, 0x9d, 0xb9, 0x0e, 0xef, 0x01, 0x9f, 0xe2, 0x35, 0x56,
++      0x29, 0x1a, 0xae, 0x8e, 0x7b, 0x67, 0x4a, 0xe9, 0x03, 0x37, 0xc6, 0x03,
++      0x98, 0x21, 0xae, 0x26, 0x27, 0xe5, 0xfc, 0xc9, 0x02, 0x0c, 0x4d, 0x7e,
++      0x4d, 0xb8, 0x81, 0x41, 0x4c, 0xb2, 0xce, 0x48, 0x3e, 0x2f, 0xbd, 0x4e,
++      0x67, 0x30, 0xcb, 0x61, 0x0c, 0x65, 0x53, 0x43, 0x09, 0x6e, 0x30, 0x3a,
++      0xfd, 0x6d, 0xba, 0x93, 0xf9, 0x1c, 0xde, 0xa8, 0x81, 0xfd, 0x3b, 0x6e,
++      0xd4, 0x25, 0xe7, 0xe0, 0x44, 0x5d, 0x39, 0xf2, 0x70, 0x6c, 0xf4, 0x45,
++      0x72, 0xfc, 0xee, 0xf6, 0x52, 0xe6, 0xa7, 0x13, 0xa3, 0x4e, 0xa4, 0x52,
++      0x52, 0x73, 0xb0, 0x7a, 0x96, 0xd3, 0x0e, 0xfa, 0x52, 0x7f, 0x02, 0x75,
++      0x35, 0x61, 0x7f, 0xb2, 0xc6, 0xae, 0x72, 0x8e, 0x4a, 0xa4, 0xd2, 0x1a,
++      0x3f, 0x01, 0x7e, 0x82, 0xfc, 0x34, 0xe2, 0xdb, 0xf4, 0xd9, 0x32, 0xe2,
++      0xed, 0xf7, 0xd3, 0x25, 0xf8, 0x24, 0xa9, 0x05, 0x74, 0xda, 0xc1, 0x28,
++      0x73, 0x04, 0xc3, 0xd2, 0x53, 0x09, 0xae, 0xd3, 0x4f, 0x5f, 0x0e, 0x95,
++      0xc0, 0x4c, 0xdd, 0x2d, 0x27, 0x94, 0xdc, 0x16, 0x6a, 0x61, 0x58, 0xf8,
++      0xe2, 0x31, 0x25, 0x95, 0x3d, 0xf3, 0xf5, 0xea, 0x38, 0xda, 0xcb, 0xc3,
++      0xae, 0xe0, 0xea, 0xb8, 0xfd, 0x13, 0x79, 0x9f, 0x75, 0x43, 0x83, 0xbc,
++      0xf3, 0xe4, 0x0a, 0x3e, 0x3d, 0xe1, 0x0a, 0xae, 0x8f, 0x1f, 0x53, 0x28,
++      0xcf, 0x81, 0x1a, 0xbb, 0x2b, 0xf8, 0xe4, 0xc4, 0xb1, 0x85, 0x99, 0xbc,
++      0x0f, 0xca, 0xd3, 0xb5, 0x06, 0x6d, 0x8c, 0x79, 0xef, 0x32, 0xe9, 0xcb,
++      0x68, 0x9d, 0x57, 0xec, 0x85, 0x46, 0x4d, 0xd8, 0xeb, 0xa9, 0xb1, 0xcb,
++      0xd9, 0x90, 0x69, 0xc4, 0x93, 0xf2, 0xae, 0x97, 0xd8, 0xfe, 0x3f, 0x99,
++      0x46, 0x99, 0x9c, 0xf5, 0xe8, 0x44, 0x5c, 0x2b, 0x67, 0xee, 0x24, 0x67,
++      0xcd, 0x8f, 0x86, 0xa2, 0xb1, 0x62, 0x79, 0x77, 0xb6, 0xe9, 0x7b, 0x21,
++      0x6f, 0xcb, 0xa0, 0x62, 0x3c, 0x5e, 0x04, 0xd9, 0xd7, 0x2e, 0xe2, 0xb7,
++      0xa6, 0x3a, 0x15, 0x6f, 0x63, 0x0f, 0x02, 0x38, 0x91, 0x16, 0x5d, 0x07,
++      0xe5, 0x8c, 0xba, 0xa5, 0xeb, 0x5b, 0x67, 0xae, 0x33, 0xb6, 0xb3, 0x2d,
++      0xea, 0xe0, 0x5f, 0xb1, 0x17, 0x1b, 0x63, 0x0a, 0xe3, 0x8a, 0x65, 0x33,
++      0xb7, 0x64, 0x5c, 0x57, 0xdb, 0x85, 0xc9, 0x50, 0xa1, 0xbc, 0x77, 0xcd,
++      0xb8, 0xee, 0x0d, 0x7c, 0xa2, 0x58, 0xf1, 0xdc, 0x28, 0x62, 0x9c, 0x7d,
++      0x61, 0xfc, 0xef, 0xcc, 0xf6, 0x6a, 0xc1, 0x2b, 0x3b, 0xc7, 0x5e, 0xc7,
++      0x6b, 0xa9, 0x5b, 0xe3, 0x5a, 0x38, 0xae, 0x90, 0xe3, 0x8a, 0xc2, 0x92,
++      0x3b, 0x7a, 0xf5, 0xb5, 0x8a, 0xe6, 0x29, 0x50, 0xa4, 0x57, 0xa6, 0xe1,
++      0xbd, 0xf4, 0xe4, 0x42, 0xc9, 0x79, 0x7b, 0x27, 0xcb, 0xb1, 0x6e, 0xaf,
++      0xd9, 0xb4, 0x68, 0xa9, 0xd9, 0x94, 0x0e, 0x45, 0xcd, 0x97, 0xab, 0x64,
++      0x4f, 0xa5, 0xff, 0x27, 0x63, 0x34, 0xd5, 0xc7, 0x5c, 0xf3, 0x6b, 0x7a,
++      0x6f, 0xf6, 0xcc, 0x2e, 0xed, 0x9a, 0xcf, 0x38, 0x9d, 0x12, 0x3b, 0xd9,
++      0xd1, 0xee, 0x62, 0x3e, 0x2a, 0xef, 0x87, 0x1e, 0xe5, 0xfe, 0x1f, 0x49,
++      0xfd, 0xcd, 0x42, 0x39, 0xc3, 0x2e, 0x67, 0x08, 0x80, 0xff, 0x0f, 0x1d,
++      0xab, 0x22, 0x97, 0x70, 0x78, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_RXP_b09FwData[(0x0/4) + 1] = { 0x0 };
+-static const u32 bnx2_RXP_b09FwRodata[(0x124/4) + 1] = {
++static const u32 bnx2_RXP_b09FwRodata[(0xf0/4) + 1] = {
+       0x5f865437, 0xe4ac62cc, 0x50103a45, 0x36621985, 0xbf14c0e8, 0x1bc27a1e,
+       0x84f4b556, 0x094ea6fe, 0x7dda01e7, 0xc04d7481, 0x80080100, 0x80080080,
+-      0x80080000, 0x08004fbc, 0x08004fbc, 0x08005098, 0x0800506c, 0x08005050,
+-      0x08004f8c, 0x08004f8c, 0x08004f8c, 0x08004fc4, 0x080072ac, 0x080072f8,
+-      0x080072b8, 0x080071dc, 0x080072b8, 0x080072e8, 0x080072b8, 0x080071dc,
+-      0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc,
+-      0x080071dc, 0x080071dc, 0x080071dc, 0x080072d8, 0x080072c8, 0x080071dc,
+-      0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc,
+-      0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080071dc, 0x080072c8,
+-      0x0800787c, 0x08007748, 0x08007844, 0x08007748, 0x08007814, 0x08007630,
+-      0x08007748, 0x08007748, 0x08007748, 0x08007748, 0x08007748, 0x08007748,
+-      0x08007748, 0x08007748, 0x08007748, 0x08007748, 0x08007748, 0x08007748,
+-      0x08007770, 0x00000000 };
++      0x80080000, 0x08004efc, 0x08004efc, 0x08004fd8, 0x08004fac, 0x08004f90,
++      0x08004ecc, 0x08004ecc, 0x08004ecc, 0x08004f04, 0x08007220, 0x0800726c,
++      0x0800722c, 0x08007150, 0x0800722c, 0x0800725c, 0x0800722c, 0x08007150,
++      0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x08007150,
++      0x08007150, 0x08007150, 0x08007150, 0x0800724c, 0x0800723c, 0x08007150,
++      0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x08007150,
++      0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x08007150, 0x0800723c,
++      0x080077f4, 0x080076bc, 0x080077bc, 0x08007718, 0x080076e8, 0x080075a4,
++      0x00000000 };
+ static struct fw_info bnx2_rxp_fw_09 = {
+-      /* Firmware version: 4.6.15 */
++      /* Firmware version: 4.4.23 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0xf,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x17,
+-      .start_addr                     = 0x080031d8,
++      .start_addr                     = 0x080031d0,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x78f4,
++      .text_len                       = 0x786c,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_RXP_b09FwText,
+       .gz_text_len                    = sizeof(bnx2_RXP_b09FwText),
+@@ -3148,492 +3158,548 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_RXP_b09FwData,
+-      .sbss_addr                      = 0x08007a40,
++      .sbss_addr                      = 0x08007980,
+       .sbss_len                       = 0x58,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08007a98,
+-      .bss_len                        = 0x20,
++      .bss_addr                       = 0x080079d8,
++      .bss_len                        = 0x1c,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x080078f4,
+-      .rodata_len                     = 0x124,
++      .rodata_addr                    = 0x0800786c,
++      .rodata_len                     = 0xf0,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_RXP_b09FwRodata,
+ };
+ static u8 bnx2_xi_rv2p_proc1[] = {
+-      /* Date:        01/27/2009 19:01 */
+-#define XI_RV2P_PROC1_POST_WAIT_TIMEOUT_MSK   0xffff
+-      0xa5, 0x56, 0xdd, 0x6b, 0x1c, 0x55, 0x14, 0x3f, 0x33, 0xbb, 0x33, 0xb3,
+-      0xd9, 0x9d, 0xd9, 0x5d, 0x9a, 0x34, 0x8e, 0xb1, 0x34, 0xdb, 0x20, 0xca,
+-      0xa6, 0x13, 0xdd, 0x68, 0x1f, 0x04, 0x03, 0x2d, 0x01, 0x29, 0x98, 0xe2,
+-      0x43, 0xa0, 0x52, 0x8a, 0x60, 0x5c, 0xb4, 0x08, 0xf6, 0x2f, 0x10, 0xc1,
+-      0x21, 0x31, 0x11, 0xc4, 0xaf, 0x7d, 0xe8, 0x42, 0x02, 0x6a, 0x40, 0x50,
+-      0x09, 0x11, 0x77, 0xdf, 0x24, 0x16, 0x7c, 0x68, 0xf1, 0x41, 0xda, 0xa7,
+-      0x16, 0xd4, 0x97, 0x46, 0x11, 0xbf, 0x5e, 0x04, 0xd1, 0xc7, 0x9a, 0xf1,
+-      0x9e, 0x8f, 0xbb, 0x3b, 0x73, 0xb3, 0x9b, 0x14, 0x5c, 0x48, 0x7e, 0x9c,
+-      0x7b, 0xcf, 0x39, 0xf7, 0x7c, 0x9f, 0xa9, 0x02, 0x80, 0x0d, 0x71, 0x77,
+-      0x52, 0x21, 0x58, 0xb9, 0x5c, 0x01, 0x01, 0x60, 0x1b, 0xf8, 0xe7, 0xf8,
+-      0x44, 0xc7, 0x8f, 0x0a, 0x7d, 0x92, 0x21, 0x3e, 0x59, 0x55, 0xff, 0x2f,
+-      0xc3, 0xe9, 0x1a, 0x62, 0x0e, 0x4e, 0x9f, 0x40, 0x7c, 0x12, 0xbe, 0xae,
+-      0x85, 0x0a, 0xff, 0x4d, 0x20, 0x46, 0xfa, 0x68, 0xe7, 0xcb, 0x6e, 0x89,
+-      0xf4, 0xef, 0x8a, 0xfc, 0xf7, 0x39, 0xc6, 0x27, 0xa2, 0x02, 0xeb, 0x11,
+-      0x84, 0x99, 0x2a, 0xc1, 0xed, 0x16, 0xd2, 0xe7, 0xcf, 0x83, 0x8b, 0x7a,
+-      0xde, 0x53, 0x0c, 0x48, 0x1f, 0xb3, 0xe2, 0x19, 0xb1, 0xcb, 0x66, 0xbe,
+-      0x3b, 0xad, 0x0a, 0x9e, 0xc3, 0x8f, 0xf3, 0x48, 0xdf, 0x57, 0x7c, 0xa3,
+-      0x85, 0x38, 0x0e, 0x97, 0x0a, 0x3e, 0xfb, 0x53, 0x17, 0x9c, 0x64, 0xf5,
+-      0xbb, 0xd3, 0x28, 0xaf, 0x64, 0xa6, 0x45, 0xbf, 0x83, 0xfa, 0x7f, 0x4f,
+-      0x58, 0x3f, 0xea, 0x4d, 0xeb, 0xbb, 0x5f, 0xe9, 0xc3, 0x73, 0x57, 0xec,
+-      0x73, 0x0d, 0xfb, 0x5c, 0x65, 0x0f, 0xca, 0xaf, 0x00, 0xfb, 0x39, 0xaa,
+-      0xde, 0x45, 0xfa, 0xaf, 0xbe, 0xbe, 0x2e, 0xa2, 0x6f, 0xb1, 0xbc, 0xfa,
+-      0x13, 0xfb, 0x59, 0xee, 0x35, 0x25, 0xa7, 0xe3, 0x92, 0xb5, 0xd3, 0x8b,
+-      0xb4, 0x7f, 0x3a, 0xfe, 0xc8, 0x7f, 0x2b, 0xc9, 0xf2, 0xc3, 0x21, 0xfc,
+-      0x37, 0x15, 0x7f, 0x56, 0x2f, 0x9f, 0x7f, 0xdb, 0x3f, 0x1f, 0x18, 0x1f,
+-      0xc7, 0x88, 0xcf, 0x75, 0xf1, 0xe7, 0x29, 0x78, 0xd0, 0x0e, 0x89, 0x2f,
+-      0x0f, 0x21, 0xc5, 0x09, 0x62, 0xc4, 0xe3, 0x82, 0x2f, 0x09, 0x7e, 0x2e,
+-      0xb8, 0x2d, 0x08, 0xff, 0x13, 0xff, 0x1e, 0x72, 0x7e, 0x54, 0xf0, 0x01,
+-      0xe3, 0xfc, 0x9a, 0xe0, 0x23, 0x86, 0xfc, 0x71, 0x8b, 0xf1, 0x0f, 0xa1,
+-      0xe7, 0x85, 0x7e, 0xc6, 0x90, 0x8f, 0x81, 0xe3, 0x63, 0x19, 0x71, 0xfb,
+-      0x58, 0xea, 0x19, 0xf3, 0x2f, 0xf7, 0x75, 0xcd, 0x57, 0xa0, 0x38, 0xc2,
+-      0x74, 0x9a, 0xff, 0x83, 0x03, 0xf8, 0x99, 0x6d, 0xbe, 0x3e, 0x48, 0xae,
+-      0x9d, 0xb0, 0x1d, 0x57, 0x44, 0xbe, 0xd8, 0xb9, 0x3a, 0xa4, 0x7f, 0xe6,
+-      0xa2, 0x41, 0xfd, 0x52, 0x17, 0x3f, 0xbe, 0x92, 0xba, 0xdc, 0xb1, 0x9a,
+-      0x51, 0xc8, 0x79, 0xa5, 0x3c, 0x06, 0x52, 0x8f, 0x23, 0x46, 0x3d, 0x7b,
+-      0xaa, 0x9e, 0xa5, 0xae, 0xea, 0xba, 0xbe, 0xb2, 0x75, 0xc5, 0xf5, 0xe1,
+-      0x1a, 0xf5, 0x11, 0x1f, 0x12, 0x97, 0x92, 0xe1, 0xdf, 0xab, 0x09, 0x86,
+-      0x18, 0x7f, 0xb6, 0xcd, 0xb8, 0xc1, 0x18, 0xf9, 0x6e, 0x1e, 0xf1, 0x94,
+-      0xff, 0x0d, 0xeb, 0x9b, 0x04, 0x44, 0x3f, 0x6c, 0x53, 0x1f, 0xe5, 0xa1,
+-      0xed, 0x2a, 0x9b, 0xe1, 0x6e, 0xf2, 0x0e, 0xf3, 0x4d, 0x38, 0x37, 0x09,
+-      0xc3, 0x8d, 0x1b, 0xcc, 0xff, 0x5d, 0x8d, 0xed, 0x7e, 0x56, 0xe6, 0x53,
+-      0xff, 0xa7, 0xef, 0xa5, 0xff, 0x2a, 0x48, 0xff, 0x63, 0xc5, 0x5d, 0xfd,
+-      0x8e, 0xc8, 0xbd, 0xa2, 0xeb, 0x9b, 0x7f, 0xcb, 0x6e, 0x95, 0xfc, 0x7d,
+-      0xab, 0x4b, 0xe4, 0x98, 0xbf, 0x56, 0xa5, 0xdb, 0xb7, 0xbb, 0xda, 0x1f,
+-      0xe9, 0xf3, 0x69, 0xed, 0x3f, 0xcb, 0x07, 0x72, 0x6d, 0x3b, 0x3a, 0x7e,
+-      0x7c, 0x5e, 0x24, 0x3b, 0x46, 0x3b, 0x9b, 0x46, 0x3e, 0x6b, 0xf7, 0x34,
+-      0x07, 0xff, 0x4c, 0xfa, 0x73, 0x30, 0x1d, 0x1f, 0x3d, 0x07, 0x0b, 0xb0,
+-      0x74, 0xb6, 0x42, 0xf6, 0x94, 0x5d, 0x56, 0x73, 0xa1, 0xc2, 0xf8, 0x62,
+-      0x91, 0xf1, 0x97, 0x22, 0xc6, 0x2f, 0x49, 0x2e, 0x95, 0x98, 0x7e, 0x21,
+-      0x40, 0xbd, 0xa3, 0xea, 0x61, 0x2d, 0xaf, 0xed, 0x3a, 0xc8, 0x1e, 0x7c,
+-      0x5f, 0xbf, 0xa3, 0xed, 0xd0, 0xef, 0x65, 0xeb, 0x65, 0xf8, 0xbb, 0x8c,
+-      0x4d, 0x3b, 0x1b, 0x87, 0xfc, 0x2c, 0xe3, 0x46, 0x03, 0xed, 0xba, 0x9a,
+-      0xf4, 0xfa, 0xb0, 0x5e, 0x25, 0xbe, 0x29, 0x60, 0x7a, 0x51, 0xea, 0x73,
+-      0x91, 0xfa, 0xa7, 0xac, 0xae, 0x10, 0x27, 0x20, 0xa6, 0xbd, 0x60, 0x17,
+-      0xaf, 0x53, 0xbd, 0xe4, 0xe4, 0x5c, 0xe5, 0x67, 0x2a, 0xdb, 0x77, 0xbb,
+-      0x5c, 0x8f, 0x85, 0x6c, 0x1d, 0x3f, 0x9c, 0x9a, 0xaf, 0x69, 0x7f, 0xad,
+-      0x5e, 0xfd, 0xee, 0xcf, 0x53, 0x36, 0x1f, 0xb7, 0x5b, 0xda, 0x7f, 0x73,
+-      0x6f, 0x30, 0x7b, 0xdc, 0x90, 0x40, 0xcd, 0xca, 0xfd, 0x8c, 0xd9, 0x2f,
+-      0x83, 0xfa, 0xad, 0x6a, 0xf4, 0xcf, 0x11, 0xe9, 0xb7, 0x91, 0xce, 0x66,
+-      0xeb, 0xb0, 0x7e, 0x46, 0xfe, 0x2f, 0x64, 0x9e, 0x54, 0xa1, 0xb7, 0x97,
+-      0xb6, 0x91, 0x2e, 0x81, 0xf4, 0x61, 0x27, 0xce, 0x65, 0xf2, 0x70, 0x06,
+-      0x06, 0xce, 0x95, 0x0f, 0x45, 0x4f, 0x43, 0xe6, 0x8b, 0x9b, 0xda, 0x5f,
+-      0xc4, 0x5e, 0x06, 0xb2, 0xc3, 0x33, 0xe6, 0xc3, 0xdd, 0x3d, 0xdd, 0xef,
+-      0xcb, 0xee, 0x20, 0x7f, 0x3d, 0xf8, 0xcd, 0xe7, 0xfa, 0x68, 0x52, 0xbf,
+-      0x38, 0x63, 0x97, 0x77, 0x32, 0x79, 0x02, 0x38, 0xa1, 0xf7, 0x52, 0xda,
+-      0xae, 0xf4, 0x5e, 0x45, 0x7d, 0x21, 0x34, 0x67, 0xd3, 0xfb, 0xf5, 0xfd,
+-      0x44, 0xcf, 0xf5, 0x80, 0xfa, 0xa4, 0xbc, 0xaf, 0xef, 0xf4, 0x1c, 0xad,
+-      0x45, 0xe9, 0xfe, 0x1d, 0x93, 0xb9, 0x69, 0x03, 0xcf, 0xcd, 0x92, 0xe9,
+-      0xa7, 0xda, 0xb7, 0x83, 0xf3, 0xc5, 0xfe, 0xde, 0xd9, 0xbb, 0xb7, 0x39,
+-      0x7b, 0x58, 0xde, 0x8b, 0x46, 0xde, 0x6f, 0xf5, 0xe2, 0x68, 0x3b, 0x83,
+-      0xbe, 0x2b, 0x4e, 0x29, 0xbd, 0xc2, 0x2f, 0x73, 0xe1, 0x79, 0x9a, 0x77,
+-      0x67, 0x84, 0x6f, 0x2e, 0x55, 0xaf, 0x83, 0xf8, 0x62, 0xa3, 0xae, 0x0b,
+-      0xfb, 0xf8, 0xb2, 0x73, 0x4c, 0xfb, 0xb3, 0xb5, 0xc5, 0xf5, 0x71, 0x31,
+-      0xd5, 0xaf, 0xe9, 0xf9, 0x3f, 0x22, 0xf5, 0xa0, 0xf8, 0xc8, 0x8f, 0x9d,
+-      0xbd, 0xfe, 0xbe, 0x48, 0xd7, 0xd7, 0xa2, 0xd4, 0xb5, 0x3d, 0xb7, 0x49,
+-      0x7d, 0xe4, 0x35, 0x7f, 0x35, 0xf2, 0x35, 0x1b, 0x61, 0x9d, 0xbc, 0x0e,
+-      0x5d, 0xb1, 0xf3, 0x87, 0x8c, 0xbd, 0x81, 0xf4, 0xa1, 0x0b, 0x9f, 0x75,
+-      0xb5, 0x5f, 0x7c, 0x5d, 0x8b, 0x18, 0x3f, 0x8d, 0xa4, 0x9f, 0x7a, 0xfe,
+-      0xe1, 0xbb, 0x0b, 0xf2, 0x6e, 0x15, 0x3e, 0xe9, 0xed, 0x03, 0x9c, 0x6f,
+-      0x1e, 0x34, 0x64, 0x7e, 0x2e, 0xc9, 0x1c, 0xfb, 0xa9, 0xc8, 0x73, 0xb2,
+-      0xb9, 0x40, 0xf5, 0x0a, 0xe3, 0x32, 0xcf, 0x9a, 0x01, 0xd3, 0x13, 0x01,
+-      0x7f, 0x07, 0x37, 0x3c, 0x9f, 0xf8, 0x26, 0x02, 0xc6, 0xf1, 0x12, 0xca,
+-      0x85, 0xf0, 0xf3, 0x39, 0x62, 0x8f, 0xd6, 0x7d, 0xde, 0x73, 0xeb, 0x37,
+-      0x64, 0x9e, 0x54, 0x74, 0xdc, 0xc4, 0xcf, 0xc7, 0xf1, 0x7c, 0x5c, 0xcd,
+-      0x2d, 0xa6, 0xb9, 0x1e, 0xfc, 0x5e, 0xfd, 0x7f, 0x24, 0x59, 0xa9, 0x55,
+-      0xd2, 0x71, 0xd6, 0xfd, 0xf6, 0xae, 0x11, 0x5f, 0x9d, 0x9f, 0x87, 0x12,
+-      0x3d, 0xe7, 0xa7, 0xce, 0xa2, 0xbd, 0x15, 0x28, 0x7b, 0x5c, 0x3f, 0x8c,
+-      0x4a, 0x8f, 0xed, 0xa1, 0xd8, 0xb1, 0x55, 0x99, 0x9b, 0xab, 0xcb, 0xa4,
+-      0xe6, 0xdc, 0xaa, 0x3e, 0x9f, 0xa7, 0x86, 0x59, 0xdc, 0xba, 0x46, 0xe7,
+-      0xe5, 0x6e, 0x8e, 0xcf, 0xbd, 0x05, 0x1d, 0xaf, 0x0a, 0xf9, 0xdf, 0xe6,
+-      0x78, 0x3d, 0x77, 0x85, 0xf1, 0x22, 0x3c, 0x4d, 0x58, 0x6c, 0x4b, 0x9f,
+-      0xaf, 0xfb, 0x05, 0x42, 0xa0, 0x78, 0xd9, 0x8f, 0xf1, 0x7e, 0x77, 0x64,
+-      0x2f, 0x17, 0x52, 0xf9, 0x33, 0xf7, 0xe4, 0x41, 0x79, 0x3c, 0x62, 0xec,
+-      0x0b, 0xbd, 0xd7, 0x2d, 0xe3, 0xfb, 0x36, 0x30, 0xea, 0xf1, 0xe5, 0x21,
+-      0xf5, 0x08, 0x43, 0xea, 0xd9, 0x9c, 0x6f, 0x4b, 0xd2, 0xef, 0x79, 0x70,
+-      0x72, 0xb4, 0x78, 0xfd, 0xfc, 0x0a, 0xe5, 0xd5, 0x5e, 0xe5, 0xef, 0x1a,
+-      0xdf, 0x59, 0xb3, 0x28, 0x5e, 0xfe, 0x1a, 0xf3, 0xe5, 0xf9, 0x3c, 0xd4,
+-      0xf8, 0xe6, 0x0a, 0xf7, 0x95, 0x0d, 0xff, 0x01, 0xd7, 0x0e, 0x41, 0x60,
+-      0x88, 0x0d, 0x00, 0x00, 0x00 };
++      /* Date:        06/17/2008 16:52 */
++      0xbd, 0x56, 0xcf, 0x6b, 0x1c, 0x75, 0x14, 0x7f, 0x3b, 0xbb, 0x33, 0x3b,
++      0x99, 0x9d, 0xdd, 0x99, 0xda, 0x34, 0x4c, 0xb7, 0x2b, 0xd9, 0x86, 0x5e,
++      0x36, 0x99, 0x62, 0xa2, 0x11, 0x0a, 0x46, 0x5b, 0x72, 0x09, 0xd8, 0x9e,
++      0x02, 0x95, 0x22, 0x82, 0x71, 0xa9, 0x3d, 0xd8, 0x96, 0xe2, 0x5f, 0xe0,
++      0x90, 0x9a, 0x08, 0x45, 0x0f, 0x0b, 0x36, 0x90, 0x20, 0x1a, 0x7b, 0x50,
++      0x09, 0x0a, 0x3b, 0x07, 0x41, 0x44, 0x2d, 0xa8, 0x88, 0x60, 0x3d, 0x08,
++      0x85, 0xda, 0x8b, 0x51, 0x8b, 0x8a, 0x07, 0x0f, 0x01, 0x8f, 0x9a, 0xf1,
++      0xfb, 0x7e, 0x7c, 0x37, 0x33, 0x93, 0xdd, 0x24, 0x27, 0x03, 0xed, 0x87,
++      0xf7, 0x9d, 0xf7, 0x7d, 0xdf, 0xf7, 0xde, 0xf7, 0xf3, 0x3e, 0xdf, 0xf5,
++      0x01, 0xc0, 0x80, 0x28, 0x1e, 0x55, 0x08, 0x87, 0x8c, 0xa2, 0xad, 0xa0,
++      0x00, 0xf0, 0x21, 0xf0, 0x9f, 0xe9, 0x92, 0x1d, 0x3d, 0x22, 0xf6, 0x04,
++      0x43, 0x34, 0xe1, 0xab, 0xff, 0xaf, 0xc2, 0xe9, 0x26, 0x62, 0x11, 0x4e,
++      0x1f, 0x47, 0x7c, 0x12, 0x6e, 0x37, 0x03, 0x85, 0xff, 0x26, 0x10, 0xa1,
++      0x3d, 0xdc, 0xfd, 0x24, 0xae, 0x50, 0xfc, 0x4d, 0xd9, 0xff, 0x63, 0x91,
++      0xf1, 0x54, 0x68, 0x73, 0x1c, 0x41, 0x38, 0xe9, 0x13, 0xdc, 0xed, 0xa0,
++      0x7d, 0xfe, 0x3c, 0x58, 0x18, 0xe7, 0x6d, 0xe5, 0x80, 0x76, 0xa3, 0x10,
++      0x9d, 0x94, 0xbc, 0x0c, 0xf6, 0xfb, 0xa9, 0xe3, 0xe1, 0x3a, 0xfc, 0x3c,
++      0x8b, 0xf6, 0x51, 0xe7, 0xd5, 0x0e, 0x62, 0x00, 0x97, 0x6c, 0x97, 0xeb,
++      0x19, 0xe5, 0xb0, 0x9b, 0xe3, 0xb8, 0x4f, 0xf9, 0x8e, 0x4b, 0x5c, 0x13,
++      0xe3, 0xfe, 0x99, 0x70, 0x5c, 0x8c, 0x97, 0x8e, 0xd3, 0x50, 0x71, 0x70,
++      0xdd, 0x92, 0xbc, 0xac, 0x5c, 0x5e, 0x96, 0xca, 0x43, 0xfa, 0x00, 0x3a,
++      0x0f, 0xc4, 0x23, 0xea, 0x5c, 0x8c, 0xbb, 0x25, 0x75, 0x03, 0x3c, 0xdf,
++      0x94, 0xf8, 0x31, 0xa2, 0x5b, 0xe0, 0x78, 0xea, 0x9f, 0xd4, 0xb1, 0x3b,
++      0x8e, 0xee, 0x53, 0x36, 0xff, 0x72, 0xa8, 0xbf, 0xeb, 0xfb, 0xc0, 0x73,
++      0x7e, 0x50, 0xe7, 0xa4, 0xfd, 0x61, 0x1f, 0xff, 0xef, 0x94, 0x7f, 0x36,
++      0x2e, 0xaf, 0x7f, 0xbb, 0xb3, 0xde, 0xea, 0xd7, 0x37, 0x33, 0xd7, 0xb7,
++      0x2f, 0xa5, 0x6f, 0x73, 0x70, 0xc2, 0x08, 0xc8, 0xaf, 0x04, 0x88, 0xc7,
++      0x54, 0x02, 0x88, 0x0f, 0x0b, 0x5e, 0x13, 0xbc, 0x25, 0xf8, 0xae, 0xe0,
++      0x11, 0xc1, 0x61, 0xc1, 0xc3, 0x82, 0x0f, 0x09, 0x6e, 0x09, 0xfa, 0x82,
++      0x9e, 0x60, 0x4d, 0xf0, 0x2f, 0x41, 0x57, 0xb0, 0x92, 0x8b, 0x57, 0x17,
++      0xb4, 0x05, 0x3f, 0x17, 0x7c, 0x22, 0xb7, 0xff, 0x68, 0x81, 0xf1, 0x81,
++      0xd8, 0x4f, 0x89, 0x7d, 0x41, 0x6c, 0x6c, 0xa8, 0xf0, 0x3e, 0xd3, 0xaf,
++      0x5b, 0xbd, 0xfb, 0xbd, 0xdb, 0x91, 0xef, 0x2d, 0xed, 0x67, 0x53, 0xff,
++      0x60, 0x3c, 0xed, 0xff, 0xd6, 0x1e, 0xfe, 0xec, 0x36, 0xdb, 0xea, 0xb7,
++      0xef, 0x66, 0xc2, 0x79, 0xbc, 0x29, 0xfb, 0x83, 0xee, 0x67, 0x03, 0xe6,
++      0x68, 0x26, 0xcc, 0xf3, 0xab, 0xdf, 0x1c, 0x3d, 0x2e, 0x73, 0x34, 0xbd,
++      0x8b, 0xbf, 0xcc, 0xd3, 0x33, 0xb2, 0x7f, 0x46, 0xf8, 0xd9, 0x18, 0xe0,
++      0x17, 0xa5, 0xe6, 0x95, 0xce, 0x1b, 0x30, 0x0f, 0x1f, 0x15, 0xda, 0x61,
++      0xc0, 0xfc, 0x89, 0xf6, 0xca, 0x0f, 0xf7, 0x0b, 0x7f, 0x5b, 0x9a, 0xc7,
++      0x59, 0xfe, 0x32, 0x0f, 0xad, 0x1c, 0x0f, 0x5f, 0xde, 0xe7, 0x1e, 0x2a,
++      0xb9, 0x7e, 0x5e, 0x56, 0xfe, 0x6c, 0x1a, 0x06, 0xe3, 0x1a, 0x63, 0xe8,
++      0x5a, 0x25, 0xc4, 0x69, 0xf7, 0x1b, 0x8e, 0x37, 0x4a, 0x75, 0xb8, 0xc1,
++      0x0a, 0xcd, 0x6d, 0x09, 0x56, 0xac, 0x21, 0x85, 0xff, 0x24, 0x6f, 0xb0,
++      0x5f, 0xdd, 0xfc, 0x9e, 0x30, 0x58, 0xbb, 0xc3, 0xfe, 0xf7, 0x9a, 0x9c,
++      0xf7, 0x33, 0x13, 0x90, 0xfb, 0xd3, 0xdf, 0x65, 0xde, 0x3d, 0xb4, 0xff,
++      0x2e, 0x44, 0xb1, 0x3e, 0x47, 0xf6, 0x5d, 0xd6, 0x73, 0xc4, 0x7f, 0x8b,
++      0x96, 0x4f, 0xf5, 0xde, 0x88, 0xc9, 0x1c, 0x76, 0x97, 0x7d, 0xfa, 0xfa,
++      0x7a, 0xac, 0xeb, 0x11, 0x5d, 0x19, 0xd7, 0xf5, 0xf3, 0xfe, 0x2a, 0x9d,
++      0x77, 0xb8, 0xbb, 0x9e, 0xe3, 0x49, 0xf3, 0x40, 0x3a, 0xbb, 0x95, 0xec,
++      0xe8, 0x6c, 0xba, 0x0f, 0x5a, 0x67, 0x6d, 0x58, 0x98, 0xf3, 0xe8, 0xdc,
++      0x9a, 0xc5, 0x61, 0x2e, 0x78, 0x8c, 0x17, 0x1d, 0xc6, 0xdf, 0x1c, 0xec,
++      0x53, 0x92, 0x5c, 0xaa, 0xb0, 0xfd, 0x42, 0x55, 0xcf, 0xb7, 0xde, 0xaf,
++      0xf3, 0xda, 0x2b, 0x1f, 0x3c, 0x5f, 0x9f, 0xa3, 0xf3, 0xd0, 0xe7, 0x65,
++      0x79, 0x31, 0xf8, 0x5c, 0xc6, 0xb6, 0x91, 0xed, 0xc3, 0xda, 0x24, 0x63,
++      0x69, 0x0a, 0xf3, 0xba, 0x9d, 0xf4, 0xe6, 0xbb, 0xe5, 0x93, 0xdf, 0x18,
++      0xb0, 0x3d, 0x2f, 0x3c, 0x9c, 0xa7, 0xb9, 0x54, 0xba, 0x63, 0x20, 0xd6,
++      0x21, 0xa2, 0x77, 0xc7, 0x70, 0xbe, 0x26, 0x5e, 0x14, 0x65, 0x5d, 0xdd,
++      0xc3, 0x58, 0x76, 0x9e, 0x37, 0x99, 0x77, 0x76, 0x96, 0xaf, 0xc7, 0x84,
++      0xaf, 0x4e, 0x77, 0xbd, 0xb3, 0xdf, 0x3c, 0x48, 0xc1, 0xbd, 0xfe, 0x6b,
++      0x3d, 0xd4, 0xef, 0xb2, 0xd6, 0x3d, 0xfa, 0xdc, 0x8d, 0x8a, 0x99, 0x3a,
++      0xcf, 0x40, 0xd8, 0xef, 0x7e, 0x3f, 0x16, 0x3d, 0x99, 0x16, 0x7d, 0x53,
++      0x97, 0x18, 0x65, 0xf6, 0xd5, 0x80, 0xf2, 0x29, 0xe7, 0xe6, 0xac, 0xd4,
++      0x9b, 0x9b, 0x45, 0x6b, 0x80, 0xde, 0x99, 0xfc, 0x7e, 0x2e, 0xcc, 0xe1,
++      0xb9, 0x76, 0xe3, 0x06, 0xcd, 0x7f, 0x19, 0xfe, 0x70, 0xf9, 0x5e, 0xda,
++      0x26, 0xda, 0xe6, 0xf0, 0x95, 0x4f, 0x33, 0xfd, 0x01, 0x38, 0xae, 0xdf,
++      0x97, 0xf4, 0x1c, 0x07, 0xd0, 0x9e, 0x3a, 0xe8, 0x7b, 0x99, 0xe6, 0x7d,
++      0x6d, 0x17, 0xef, 0xb5, 0x3e, 0x36, 0xc3, 0xf4, 0x9c, 0xe0, 0x3b, 0xc1,
++      0xf7, 0xcd, 0xfa, 0x54, 0xc9, 0xf7, 0x41, 0xbd, 0x9f, 0xba, 0xbe, 0x7e,
++      0xef, 0xe8, 0xaf, 0xdb, 0x07, 0xd3, 0xb3, 0x74, 0x9f, 0xfa, 0xe9, 0x99,
++      0x93, 0xd3, 0xa7, 0x7b, 0xdb, 0x3d, 0x7d, 0x32, 0xfb, 0xd5, 0xff, 0x7f,
++      0xe8, 0x36, 0xf7, 0xd3, 0x81, 0x74, 0x3d, 0x1b, 0x1b, 0xcc, 0x9f, 0xab,
++      0xa9, 0x79, 0x49, 0xdf, 0xff, 0x90, 0xf0, 0x45, 0xf9, 0x51, 0x1d, 0x5f,
++      0x6c, 0xef, 0xe8, 0x72, 0x9a, 0x7f, 0x2f, 0x0a, 0xff, 0x8d, 0x99, 0x75,
++      0xe6, 0x47, 0xfb, 0xf7, 0xdc, 0x7d, 0x4d, 0x85, 0xc8, 0x97, 0x57, 0x20,
++      0x96, 0x3c, 0xef, 0x67, 0xf2, 0xad, 0x8a, 0x2e, 0x95, 0xe1, 0x83, 0x58,
++      0xd7, 0xc5, 0x9f, 0x9b, 0x21, 0xe3, 0xfb, 0xe4, 0xef, 0xef, 0xf3, 0x2e,
++      0xf9, 0xf0, 0x5e, 0x4f, 0x7f, 0x3d, 0x8a, 0x37, 0x29, 0x3a, 0xb6, 0x20,
++      0x7a, 0xf2, 0x8b, 0xc3, 0x7a, 0xd5, 0x3e, 0x4b, 0xfc, 0x85, 0x11, 0xd1,
++      0x95, 0x76, 0x95, 0xed, 0x7a, 0x95, 0x7f, 0xef, 0x4e, 0x96, 0x5d, 0xf2,
++      0xab, 0x57, 0x19, 0x47, 0x2a, 0xb8, 0x2f, 0x80, 0x07, 0xe7, 0xc8, 0x3d,
++      0x5c, 0x75, 0xf9, 0x5d, 0x59, 0xbd, 0x23, 0x7a, 0xe7, 0xe9, 0xfe, 0x49,
++      0xbd, 0x8f, 0xe1, 0xfa, 0x88, 0xd2, 0x0f, 0xb6, 0x99, 0x17, 0x6e, 0x6f,
++      0x1e, 0xde, 0x91, 0xec, 0x9b, 0x5e, 0xba, 0xdf, 0x7a, 0x2e, 0x3b, 0xb9,
++      0x3e, 0xeb, 0x7b, 0x3a, 0x95, 0x68, 0xbd, 0x1d, 0x9b, 0xc3, 0x7c, 0x3d,
++      0xa8, 0x95, 0x99, 0x47, 0x8c, 0x2a, 0x8e, 0x51, 0xc6, 0x6d, 0x8d, 0x25,
++      0xd1, 0xaf, 0xa5, 0x45, 0x0a, 0x73, 0x6e, 0x49, 0xaf, 0xcf, 0xd2, 0xe0,
++      0xcc, 0x6f, 0x7c, 0x45, 0xeb, 0xb5, 0xb8, 0xc8, 0xeb, 0xe5, 0xb3, 0xba,
++      0x5f, 0x1e, 0xd5, 0xbf, 0xc2, 0xfd, 0x7a, 0xee, 0x26, 0xe3, 0xb3, 0xf0,
++      0x34, 0xa1, 0xb3, 0x22, 0x73, 0xbf, 0xea, 0xda, 0x84, 0x40, 0xfd, 0x32,
++      0x1e, 0xe5, 0xf7, 0xd4, 0x94, 0x77, 0x70, 0x28, 0x75, 0x8f, 0xf9, 0xf7,
++      0xea, 0xa0, 0xf7, 0x99, 0xd6, 0x6f, 0xfd, 0x9e, 0x16, 0x72, 0xbf, 0x5f,
++      0xab, 0x39, 0x7e, 0xbe, 0x34, 0x80, 0x9f, 0x87, 0x06, 0xf0, 0x3b, 0xaf,
++      0x87, 0x6d, 0x99, 0xff, 0x12, 0x98, 0x45, 0x7a, 0x08, 0xdd, 0xd2, 0x75,
++      0xba, 0x5f, 0x63, 0x89, 0x7f, 0x4f, 0xb8, 0xe6, 0x72, 0x81, 0xfa, 0xe6,
++      0x2e, 0xb3, 0x5f, 0x89, 0xd7, 0x03, 0x8d, 0xaf, 0x5d, 0xe7, 0x39, 0x33,
++      0xe0, 0x3f, 0xdd, 0xd1, 0x99, 0x07, 0x78, 0x0d, 0x00, 0x00, 0x00 };
+ static u8 bnx2_xi_rv2p_proc2[] = {
+-      /* Date:        01/27/2009 19:01 */
++      /* Date:        06/17/2008 16:52 */
+ #define XI_RV2P_PROC2_MAX_BD_PAGE_LOC   5
+ #define XI_RV2P_PROC2_BD_PAGE_SIZE_MSK        0xffff
+ #define XI_RV2P_PROC2_BD_PAGE_SIZE    ((BCM_PAGE_SIZE / 16) - 1)
+-      0xad, 0x57, 0x4d, 0x68, 0x5c, 0x55, 0x14, 0xbe, 0x33, 0x6f, 0x7e, 0xde,
+-      0xcc, 0xbc, 0xc9, 0x4c, 0x93, 0x38, 0x99, 0x26, 0xc5, 0xa4, 0x09, 0x8d,
+-      0x4e, 0x9d, 0x69, 0x27, 0x3f, 0x44, 0xb0, 0x42, 0x43, 0x90, 0xb4, 0xb5,
+-      0x4a, 0xd3, 0x28, 0xc5, 0x5d, 0x92, 0xa9, 0x1d, 0x8c, 0x69, 0x23, 0x18,
+-      0x70, 0xe1, 0xc6, 0x47, 0x5a, 0xd3, 0xcd, 0x2c, 0x4c, 0x31, 0x3f, 0x8a,
+-      0xa0, 0xd8, 0x9d, 0xb8, 0x19, 0x50, 0xdb, 0x8a, 0x22, 0x14, 0x0c, 0x52,
+-      0x17, 0x45, 0xb0, 0x58, 0x37, 0x8a, 0x58, 0x1b, 0x1a, 0x11, 0x8d, 0x8b,
+-      0xae, 0x24, 0xe3, 0xbd, 0xe7, 0x3b, 0xf7, 0xcd, 0xbc, 0xc9, 0x8b, 0x89,
+-      0x62, 0x36, 0x27, 0xe7, 0xbe, 0x73, 0xcf, 0x39, 0xf7, 0x9c, 0xef, 0x7c,
+-      0xf7, 0x4e, 0x52, 0x08, 0x11, 0x10, 0x76, 0xb9, 0x5d, 0x4a, 0xe1, 0x33,
+-      0x0c, 0x53, 0x8a, 0x8a, 0x10, 0xc1, 0xb4, 0xd2, 0x85, 0x5f, 0xf0, 0xdf,
+-      0xfe, 0x24, 0x89, 0x6f, 0xcb, 0x96, 0x32, 0x13, 0x76, 0x46, 0xd9, 0x45,
+-      0xc4, 0xb3, 0xfe, 0x88, 0x94, 0x87, 0xc5, 0x68, 0x06, 0xf6, 0x01, 0xa1,
+-      0xa4, 0xb4, 0xb5, 0x95, 0xdc, 0xc5, 0xf2, 0x38, 0xcb, 0xc7, 0x7d, 0x90,
+-      0x87, 0x58, 0x3e, 0x56, 0x27, 0x05, 0xdb, 0x3d, 0xcd, 0xfa, 0x00, 0x4b,
+-      0x8b, 0xd7, 0x47, 0x59, 0xff, 0x90, 0xa5, 0xcd, 0xeb, 0x61, 0xd6, 0x1f,
+-      0xf0, 0xa9, 0x25, 0xe4, 0xab, 0xf4, 0xb5, 0x4a, 0x55, 0xb7, 0xe0, 0x3e,
+-      0x83, 0x73, 0x3c, 0xd3, 0xa1, 0xbe, 0xdf, 0xad, 0xb8, 0xed, 0xef, 0x38,
+-      0xfa, 0xac, 0xa1, 0xf4, 0x1f, 0xa5, 0xee, 0x53, 0x6a, 0x73, 0x0a, 0xdb,
+-      0x9b, 0xd3, 0x25, 0xb5, 0xdf, 0x10, 0xcb, 0xf3, 0x26, 0x55, 0x67, 0xd1,
+-      0x82, 0x6e, 0x97, 0x4d, 0xaa, 0xcb, 0xa2, 0xc5, 0xfe, 0x58, 0xee, 0x8e,
+-      0x23, 0xde, 0xa9, 0x0e, 0xd4, 0xed, 0xbb, 0x47, 0x60, 0x67, 0x27, 0x74,
+-      0x61, 0xf1, 0xbd, 0x5d, 0xf0, 0xf7, 0x29, 0xa5, 0xaf, 0xfb, 0x9a, 0x7c,
+-      0xa8, 0x47, 0x98, 0xad, 0xfc, 0x41, 0xb5, 0xbe, 0xb7, 0x7f, 0x71, 0x1e,
+-      0xf6, 0x63, 0x1d, 0x58, 0x7f, 0x30, 0xab, 0xfc, 0x85, 0x84, 0xcd, 0x52,
+-      0xe4, 0x28, 0x2f, 0x9f, 0x9d, 0x73, 0xfb, 0xff, 0x61, 0x1e, 0xda, 0x44,
+-      0x1c, 0x7e, 0xa3, 0x2e, 0xbf, 0xa9, 0x4d, 0x7e, 0x6f, 0x47, 0x6a, 0xfd,
+-      0x37, 0xf8, 0xe0, 0x3f, 0xba, 0xad, 0xff, 0x42, 0x1c, 0xb2, 0x29, 0xeb,
+-      0x15, 0x27, 0xb2, 0x4d, 0xfe, 0x2f, 0x6e, 0xeb, 0xff, 0x55, 0x27, 0x7f,
+-      0xbd, 0x5e, 0x5f, 0x3f, 0x52, 0x3f, 0xb0, 0x0f, 0xf2, 0xf6, 0xfd, 0xfa,
+-      0xdc, 0x9c, 0x9f, 0x01, 0x39, 0x98, 0x25, 0x51, 0x3a, 0xcd, 0x00, 0x1f,
+-      0xee, 0x56, 0x71, 0x1b, 0x45, 0xc0, 0xaf, 0xfc, 0x1d, 0x30, 0x43, 0xd7,
+-      0xb0, 0xfe, 0x1c, 0xf7, 0xe9, 0x79, 0x3e, 0xc8, 0x2f, 0x51, 0x55, 0x98,
+-      0x4a, 0xa5, 0x18, 0x63, 0xff, 0xdc, 0x67, 0x3b, 0x86, 0xfd, 0x2b, 0x96,
+-      0xca, 0xef, 0x86, 0xc4, 0x8d, 0x57, 0xdf, 0x8d, 0x7f, 0xe8, 0x3b, 0xf6,
+-      0xef, 0x7a, 0x08, 0x5f, 0xdf, 0x28, 0x42, 0x6f, 0xbb, 0x9c, 0xa4, 0xfa,
+-      0x2c, 0x97, 0xbd, 0x70, 0x52, 0xef, 0x5f, 0xce, 0x71, 0x02, 0x71, 0x44,
+-      0xa7, 0x49, 0xc9, 0xa1, 0xae, 0xd2, 0x26, 0xe7, 0x59, 0x27, 0xb1, 0xb8,
+-      0x4f, 0xcf, 0x05, 0xf4, 0x62, 0x88, 0x44, 0x7a, 0x62, 0x4e, 0x9d, 0x33,
+-      0x21, 0xc6, 0xfd, 0x2a, 0x61, 0x3f, 0xd7, 0xc5, 0x30, 0xad, 0x4f, 0x60,
+-      0xff, 0x45, 0xbb, 0x45, 0x67, 0x28, 0xf6, 0x61, 0x5f, 0x73, 0x2f, 0xe4,
+-      0x42, 0x6f, 0x50, 0x89, 0x6c, 0x71, 0x86, 0xd4, 0x03, 0x3f, 0xf7, 0x98,
+-      0x64, 0x67, 0xe7, 0xf4, 0xdc, 0xe9, 0xbe, 0xa9, 0x3a, 0xbd, 0x52, 0x9d,
+-      0xbf, 0x2e, 0xd4, 0xf5, 0xee, 0x3e, 0x65, 0x2f, 0x8b, 0xdb, 0x89, 0x38,
+-      0xa3, 0x93, 0x5e, 0x73, 0xfb, 0x92, 0x53, 0xdf, 0x9d, 0xf6, 0x7f, 0x90,
+-      0xea, 0x30, 0xc8, 0xf5, 0xe8, 0x60, 0x9c, 0xed, 0xf1, 0xc0, 0x59, 0x82,
+-      0xfe, 0x5f, 0x1b, 0x4a, 0x52, 0x3d, 0x4f, 0x60, 0xfd, 0xd2, 0xf0, 0x15,
+-      0xf4, 0xe3, 0x18, 0xd5, 0x41, 0x44, 0x2f, 0x7c, 0x8c, 0x5d, 0x13, 0x34,
+-      0xdf, 0xe7, 0xfa, 0x8b, 0x9f, 0x42, 0x2f, 0x18, 0x4a, 0x9f, 0xb2, 0x4e,
+-      0x5f, 0x85, 0x7d, 0xf0, 0x7c, 0x92, 0xea, 0x77, 0x82, 0xa3, 0x1c, 0x33,
+-      0x88, 0x4f, 0x4a, 0xa1, 0xf3, 0xa4, 0x5a, 0x2b, 0xf4, 0x3d, 0x29, 0x2e,
+-      0x96, 0xf1, 0x7d, 0x3a, 0xa6, 0xce, 0x37, 0xe2, 0xf0, 0xce, 0x64, 0x08,
+-      0xfb, 0x4b, 0xf3, 0xe0, 0x8d, 0x7b, 0x1f, 0x29, 0x7d, 0x2c, 0x7b, 0x0f,
+-      0xf6, 0xd9, 0xc9, 0x39, 0x76, 0xec, 0x47, 0xfd, 0xd6, 0xfc, 0xb0, 0x67,
+-      0x58, 0x46, 0x03, 0xd4, 0x3f, 0x9f, 0xb0, 0x86, 0x21, 0x5f, 0xa7, 0xef,
+-      0x7f, 0xf9, 0x4a, 0x54, 0xb7, 0x53, 0x0d, 0x81, 0x2b, 0xba, 0x3e, 0x2c,
+-      0x13, 0xfa, 0x5c, 0x90, 0x3b, 0xc5, 0xfd, 0x9c, 0xb5, 0x15, 0xde, 0xb9,
+-      0x8f, 0x99, 0xed, 0xf0, 0x0e, 0x39, 0xdc, 0x0d, 0x19, 0xea, 0x22, 0xbe,
+-      0xf8, 0x17, 0xb8, 0xe7, 0xbc, 0x36, 0xcd, 0x15, 0x56, 0xab, 0xf8, 0x24,
+-      0x21, 0x71, 0xe9, 0xc2, 0xa9, 0x9c, 0x03, 0xe2, 0x57, 0xd9, 0x07, 0x8d,
+-      0x37, 0xe5, 0x30, 0x2c, 0xa6, 0xd8, 0xef, 0x24, 0xd7, 0xe3, 0x2c, 0xd7,
+-      0xe3, 0x37, 0x96, 0xd3, 0x31, 0x5d, 0x07, 0xc8, 0x8b, 0x34, 0xff, 0x69,
+-      0x8f, 0x7b, 0x43, 0xdf, 0x0f, 0xe8, 0xcf, 0x32, 0xf7, 0xf3, 0x2d, 0xe7,
+-      0x9e, 0xd0, 0x75, 0xdd, 0xea, 0xbe, 0xd0, 0xf8, 0xc7, 0xfa, 0xe8, 0xa4,
+-      0xe7, 0x39, 0x4b, 0x5f, 0x76, 0xc2, 0x4d, 0x63, 0x17, 0xa4, 0x53, 0xdf,
+-      0x6e, 0x9a, 0xdf, 0x86, 0x96, 0xab, 0xfa, 0x7c, 0x2a, 0xcf, 0x5f, 0xf5,
+-      0xfc, 0x35, 0x2c, 0xcd, 0x92, 0x8c, 0x36, 0x5e, 0x56, 0xf1, 0x5a, 0x3d,
+-      0xf8, 0xc3, 0x3d, 0xc7, 0xf5, 0xf5, 0x9d, 0x8e, 0x13, 0xb1, 0xf6, 0xdf,
+-      0x5c, 0x75, 0xcf, 0x2b, 0xe6, 0x33, 0xec, 0xe0, 0xbb, 0x79, 0x80, 0xfb,
+-      0xc0, 0x32, 0xf5, 0xa8, 0xf2, 0x3b, 0xc2, 0x71, 0xf2, 0x1c, 0xc7, 0xaa,
+-      0xe1, 0x0b, 0x95, 0xe7, 0xfa, 0x86, 0xe6, 0x09, 0x8d, 0x8f, 0x2a, 0x5f,
+-      0xe8, 0x3e, 0x50, 0xfc, 0xec, 0xcd, 0x55, 0xb5, 0xbf, 0x6d, 0x1b, 0xfe,
+-      0x58, 0x75, 0xfc, 0xdd, 0x72, 0x78, 0x22, 0x49, 0x71, 0x0f, 0xb3, 0xea,
+-      0xe6, 0xc1, 0x3f, 0x24, 0x0f, 0xaa, 0xef, 0xa6, 0x69, 0x39, 0xf3, 0xc2,
+-      0xfc, 0x37, 0xa3, 0xe2, 0xa5, 0x39, 0xff, 0xb4, 0xbe, 0xbf, 0x64, 0xfe,
+-      0xcc, 0x93, 0x63, 0xb5, 0x7c, 0x77, 0xdb, 0x23, 0xee, 0x7f, 0xf5, 0xc7,
+-      0xf3, 0x95, 0x65, 0xbe, 0xcf, 0x51, 0x9e, 0x95, 0xf1, 0x3c, 0xe3, 0x25,
+-      0x57, 0xdf, 0x07, 0xf4, 0x15, 0xf6, 0xb2, 0xbf, 0x9a, 0xf7, 0xfa, 0xb4,
+-      0x7f, 0xa8, 0x76, 0x4f, 0xad, 0x7d, 0x7d, 0xff, 0x03, 0x5b, 0xf0, 0xf8,
+-      0xe7, 0x1b, 0x78, 0x7f, 0x7d, 0xb6, 0x51, 0x7d, 0x4f, 0x79, 0xe2, 0xc4,
+-      0x16, 0x74, 0x3f, 0x85, 0x25, 0x9e, 0xe9, 0xbd, 0x26, 0xb4, 0xbd, 0x3f,
+-      0x88, 0xf7, 0xa4, 0x60, 0xfc, 0x9e, 0x7b, 0x98, 0xfd, 0x64, 0xc0, 0xc7,
+-      0x2f, 0x9c, 0xa1, 0xfe, 0xbe, 0x79, 0xf6, 0x3e, 0xf1, 0xf2, 0x7b, 0x2f,
+-      0x5f, 0x53, 0x7e, 0x77, 0x8b, 0xd5, 0x19, 0x8b, 0xf2, 0x1a, 0xda, 0x0b,
+-      0xf3, 0xfb, 0x87, 0xea, 0xfb, 0xad, 0xfc, 0x9a, 0x8c, 0x07, 0x69, 0x37,
+-      0xe1, 0x7e, 0x97, 0x6c, 0xce, 0x13, 0x73, 0x7f, 0x24, 0x81, 0x7d, 0x9a,
+-      0xbf, 0xdc, 0xf8, 0x79, 0x77, 0xa3, 0x7a, 0xff, 0xc0, 0xcd, 0xad, 0x83,
+-      0xde, 0x73, 0x71, 0xb2, 0xaf, 0x36, 0x4e, 0x46, 0xac, 0x94, 0xe1, 0x7f,
+-      0x84, 0x79, 0x65, 0x9c, 0x13, 0xf9, 0x29, 0x9a, 0xa0, 0x78, 0x85, 0xe3,
+-      0x84, 0x6b, 0x91, 0x8a, 0xe1, 0xdc, 0x85, 0xa7, 0xf0, 0xbd, 0x10, 0xc7,
+-      0x7a, 0x6b, 0x1c, 0xef, 0xcd, 0x91, 0xb0, 0x45, 0xf6, 0xad, 0x71, 0xc8,
+-      0x14, 0xf3, 0xcf, 0x8a, 0xc3, 0xcb, 0x90, 0xcb, 0xa1, 0xad, 0x78, 0x19,
+-      0xf7, 0xdb, 0xf5, 0x90, 0x5a, 0x97, 0x8f, 0xa0, 0x0c, 0x78, 0x69, 0xa8,
+-      0xdb, 0xa2, 0xef, 0xa3, 0x19, 0xe0, 0x48, 0x74, 0x7a, 0x9f, 0xab, 0x0d,
+-      0xfc, 0xd2, 0x5a, 0xe5, 0xef, 0x5a, 0x9e, 0xb7, 0x7a, 0x97, 0x1c, 0x1e,
+-      0x75, 0xe7, 0x01, 0xfe, 0x52, 0xfe, 0x49, 0x95, 0x7c, 0xb5, 0x13, 0x7e,
+-      0x37, 0x18, 0x2f, 0xbf, 0xf3, 0xbd, 0xdf, 0x24, 0xbe, 0x2a, 0xa3, 0x0e,
+-      0x2b, 0xe5, 0xfa, 0xfe, 0xe8, 0x3c, 0x74, 0x1c, 0x9c, 0x4b, 0x9f, 0xb3,
+-      0x1a, 0x17, 0x79, 0x9d, 0xe1, 0xfc, 0xef, 0xd0, 0xfb, 0x2f, 0xc5, 0xe7,
+-      0x55, 0x7e, 0xb1, 0x7e, 0x94, 0xee, 0xa1, 0xa0, 0x7c, 0xdf, 0x6b, 0xdd,
+-      0x7d, 0x3f, 0x8c, 0x50, 0x5e, 0x8d, 0x72, 0x41, 0xef, 0x77, 0x9f, 0xbb,
+-      0x39, 0x0f, 0xb9, 0x90, 0xd7, 0x7d, 0xd3, 0xfd, 0xd5, 0xfd, 0x44, 0xdf,
+-      0x53, 0x3d, 0x64, 0xd6, 0x5f, 0xe8, 0x21, 0x9c, 0xe7, 0x0b, 0xeb, 0xee,
+-      0x77, 0xf2, 0xc9, 0xac, 0xb2, 0x7f, 0x4d, 0x7c, 0x43, 0xf3, 0x28, 0xc4,
+-      0xf7, 0x2c, 0xab, 0x7c, 0x29, 0xf8, 0xaf, 0x96, 0x77, 0x0d, 0x71, 0x3d,
+-      0xc8, 0xcb, 0x7d, 0x7a, 0xee, 0xdc, 0xf3, 0x5b, 0xad, 0xbb, 0x3a, 0xc7,
+-      0x13, 0x1e, 0xfc, 0xa4, 0xcf, 0xa9, 0xec, 0xf3, 0x8c, 0x5f, 0x53, 0x0c,
+-      0x1d, 0xc1, 0xfb, 0xb0, 0x21, 0x8c, 0x39, 0x69, 0x08, 0x7b, 0xdd, 0xef,
+-      0x12, 0x3f, 0x11, 0xfa, 0x05, 0xb3, 0xa7, 0x31, 0x42, 0xe7, 0xba, 0x74,
+-      0xe3, 0x6b, 0x32, 0x7b, 0x7f, 0x29, 0x86, 0xf5, 0x96, 0x21, 0x84, 0x09,
+-      0x10, 0xde, 0x0d, 0x71, 0x01, 0xf3, 0xf0, 0xce, 0x02, 0xe4, 0xdb, 0xe2,
+-      0x49, 0xf8, 0x69, 0x9c, 0xa5, 0xfb, 0xd4, 0x6c, 0x41, 0x79, 0x4b, 0x4b,
+-      0x8c, 0xf3, 0xb4, 0x9f, 0x7e, 0xaf, 0x56, 0x44, 0x9c, 0x7f, 0x47, 0xf0,
+-      0xbc, 0x02, 0xcf, 0x81, 0x9a, 0xbe, 0xef, 0x14, 0xdf, 0x4a, 0x8f, 0x4b,
+-      0xfc, 0xc2, 0x0d, 0xe3, 0xdc, 0xac, 0xc7, 0xb9, 0xee, 0x6f, 0xda, 0xef,
+-      0x89, 0xeb, 0x81, 0xcd, 0xb8, 0xd6, 0xf9, 0xa9, 0x3a, 0xff, 0xe9, 0xbc,
+-      0x7b, 0x37, 0xfb, 0x57, 0xfb, 0x62, 0x12, 0xdf, 0xff, 0x17, 0xae, 0x21,
+-      0x8f, 0x76, 0xa9, 0xf8, 0x2d, 0x35, 0xf8, 0xf4, 0x9e, 0x3b, 0xf0, 0x9b,
+-      0x21, 0x79, 0xfc, 0x6f, 0x6a, 0x8c, 0x09, 0xd0, 0x18, 0x10, 0x00, 0x00,
+-      0x00 };
++      0xad, 0x58, 0x4d, 0x4c, 0x54, 0x57, 0x14, 0xbe, 0xf3, 0xc3, 0xcc, 0x30,
++      0xbc, 0x99, 0x41, 0x98, 0x0e, 0x7f, 0xa6, 0x22, 0x28, 0x82, 0x1d, 0x14,
++      0x06, 0xd4, 0xb6, 0x36, 0xa9, 0xc1, 0x06, 0xb5, 0xb5, 0x11, 0x69, 0x63,
++      0xba, 0x68, 0x8a, 0x60, 0x45, 0x06, 0xc1, 0x10, 0x31, 0x2e, 0xdc, 0x74,
++      0x02, 0x16, 0xbb, 0x98, 0x85, 0x98, 0xe2, 0x60, 0xd3, 0x18, 0x52, 0x37,
++      0xa6, 0x3b, 0x92, 0xb6, 0x62, 0xbb, 0x30, 0x31, 0x2d, 0xb1, 0xb6, 0x89,
++      0x36, 0xb1, 0x7f, 0x9b, 0xa6, 0xa6, 0x5a, 0x8a, 0x4a, 0x2d, 0xda, 0xb2,
++      0xaa, 0xd0, 0x77, 0xcf, 0x77, 0xee, 0x9b, 0x37, 0x33, 0x6f, 0x44, 0x53,
++      0xd9, 0x1c, 0xee, 0x7d, 0xe7, 0x9e, 0x7b, 0xce, 0x77, 0x7e, 0xef, 0xe4,
++      0x0b, 0x21, 0x9c, 0x22, 0x36, 0xbe, 0x4c, 0xa7, 0x62, 0x89, 0xdd, 0xe1,
++      0xd1, 0xc9, 0x82, 0x10, 0x39, 0xc5, 0x72, 0x2d, 0xec, 0x82, 0xff, 0x56,
++      0xe7, 0x13, 0xb9, 0x36, 0x2e, 0xbf, 0xbb, 0xc5, 0xeb, 0x76, 0x7c, 0x77,
++      0x0a, 0x49, 0x03, 0x42, 0xc4, 0x24, 0xcd, 0x67, 0xba, 0x9d, 0xe9, 0x4a,
++      0x1b, 0xe8, 0x46, 0xa6, 0x51, 0xa6, 0x2b, 0x98, 0xd6, 0xdb, 0x41, 0x57,
++      0x31, 0xad, 0xe6, 0x7d, 0x8d, 0xcf, 0xd7, 0xf2, 0xfe, 0x7b, 0x4c, 0x8f,
++      0xf2, 0xbe, 0xa6, 0xf3, 0x29, 0xbd, 0xe4, 0x7a, 0x66, 0x41, 0xc4, 0xf4,
++      0x33, 0x42, 0xdf, 0xae, 0x51, 0xfb, 0x1a, 0x91, 0x58, 0x0d, 0xf4, 0x7e,
++      0xad, 0x5c, 0xf2, 0xfd, 0x61, 0xc1, 0x27, 0xf7, 0x6f, 0x2e, 0x28, 0x79,
++      0x03, 0x0e, 0xb9, 0xfe, 0x55, 0x5f, 0xdb, 0xe4, 0x32, 0x18, 0x82, 0x98,
++      0x60, 0x71, 0x5c, 0xca, 0x71, 0x88, 0xd1, 0x61, 0x0f, 0xa1, 0x72, 0x52,
++      0xc3, 0x3a, 0x46, 0x78, 0xd8, 0xf4, 0x35, 0xcb, 0x63, 0x5a, 0xe2, 0xc3,
++      0xbd, 0xbb, 0xca, 0x71, 0xdf, 0x8f, 0xcf, 0x80, 0x2f, 0x16, 0x50, 0x80,
++      0xe2, 0xfb, 0x32, 0xc1, 0xdf, 0xf7, 0xcb, 0xf5, 0xac, 0xad, 0xd0, 0x06,
++      0x5c, 0xdd, 0xcc, 0x65, 0xcf, 0x91, 0xfb, 0xcb, 0x1b, 0x4f, 0x0e, 0x83,
++      0xbf, 0xad, 0x1c, 0xfb, 0x4f, 0x87, 0xa5, 0x3c, 0x97, 0x88, 0x31, 0x15,
++      0xb5, 0xa4, 0x97, 0x2d, 0x56, 0x9b, 0x2a, 0xff, 0x97, 0x61, 0xac, 0xda,
++      0x7d, 0x90, 0xeb, 0x4d, 0x91, 0x1b, 0xca, 0x90, 0xfb, 0x53, 0xae, 0x59,
++      0xbe, 0xdf, 0x06, 0xf9, 0xde, 0x45, 0xe5, 0x77, 0xf8, 0x40, 0x0b, 0xc3,
++      0x56, 0xf7, 0xe4, 0x2e, 0xa2, 0x7f, 0xf7, 0xa2, 0xf2, 0x8f, 0x18, 0xfa,
++      0x2b, 0xff, 0xa9, 0xef, 0xe9, 0x38, 0xd2, 0xf2, 0xe3, 0xd8, 0x5a, 0x16,
++      0xb3, 0x5a, 0xd9, 0xcf, 0x7a, 0x3a, 0x40, 0x37, 0x85, 0x89, 0xc4, 0xf7,
++      0x70, 0x80, 0x37, 0x57, 0xc9, 0xfb, 0x0b, 0x84, 0xd3, 0x2e, 0xe5, 0xd5,
++      0x79, 0x5c, 0xe7, 0xb1, 0xff, 0x06, 0xfb, 0xeb, 0x6d, 0x36, 0xe8, 0xa6,
++      0x57, 0x02, 0xb4, 0xb0, 0xd0, 0x99, 0xc7, 0xf2, 0xd9, 0xdf, 0xb1, 0x3c,
++      0x9c, 0x9f, 0xd4, 0xa4, 0x9e, 0x5f, 0xeb, 0xf1, 0x63, 0xe5, 0x7f, 0xc7,
++      0x43, 0xfc, 0x8f, 0xf3, 0x4b, 0x56, 0xe1, 0xeb, 0xf1, 0x4e, 0xac, 0xcb,
++      0xce, 0xe4, 0x13, 0x4e, 0xa3, 0xe3, 0x56, 0xf1, 0x92, 0x2e, 0x5f, 0xcf,
++      0xe3, 0x00, 0xee, 0x11, 0x15, 0x1e, 0x52, 0x0e, 0xf8, 0xea, 0x3c, 0xb5,
++      0x96, 0x38, 0x89, 0x93, 0x2b, 0xe5, 0xbe, 0x5d, 0xb4, 0x3a, 0x34, 0xba,
++      0xa7, 0x35, 0xaa, 0xf2, 0x06, 0xdf, 0x3b, 0x5d, 0x44, 0x8a, 0xdb, 0x87,
++      0xa4, 0xdd, 0x01, 0xb1, 0xdb, 0x1e, 0x20, 0x7e, 0xe0, 0xe4, 0xf0, 0x68,
++      0x9f, 0x81, 0xff, 0xc2, 0x32, 0x8d, 0x6c, 0xea, 0x6c, 0xc0, 0xb9, 0x60,
++      0x04, 0x74, 0x24, 0x92, 0x23, 0x49, 0xb8, 0xb3, 0x9f, 0x96, 0x6b, 0x7e,
++      0xab, 0xf7, 0x10, 0x5f, 0xac, 0x56, 0xe5, 0xa5, 0xf2, 0xa3, 0xc4, 0xed,
++      0x90, 0x91, 0x87, 0xa2, 0x12, 0x38, 0xff, 0xbe, 0x52, 0xf2, 0xeb, 0x60,
++      0x57, 0xe0, 0x9e, 0xa4, 0x7e, 0xe6, 0xbc, 0xee, 0x35, 0xe5, 0xf5, 0xe3,
++      0xc5, 0xc5, 0x26, 0xc2, 0x67, 0x13, 0xe3, 0x54, 0xce, 0x71, 0xb8, 0xd4,
++      0x22, 0x0e, 0x03, 0xf4, 0xff, 0xad, 0xa6, 0x7c, 0xc2, 0x79, 0x07, 0xf6,
++      0x4f, 0x34, 0x9f, 0x83, 0x9f, 0xb6, 0x11, 0x1e, 0xc2, 0x7b, 0xf4, 0x53,
++      0x9c, 0x6a, 0xa7, 0xfc, 0xef, 0x6d, 0xec, 0xfc, 0x1c, 0xeb, 0x0e, 0x87,
++      0x5c, 0xef, 0xd7, 0xf6, 0x4c, 0x80, 0x3f, 0x67, 0x10, 0xb8, 0xef, 0xe0,
++      0x5b, 0xb6, 0x39, 0xa8, 0xde, 0xc4, 0x5d, 0x83, 0xb4, 0xd4, 0x26, 0xe9,
++      0x7b, 0xbe, 0x38, 0x36, 0x8e, 0xef, 0x07, 0xf2, 0xa4, 0x9d, 0xaf, 0x1a,
++      0x75, 0x29, 0xea, 0xc2, 0xf9, 0xf8, 0x30, 0xea, 0xca, 0xf4, 0x27, 0x72,
++      0xdd, 0x16, 0x9e, 0x06, 0x7f, 0x38, 0x3a, 0xc4, 0x82, 0xed, 0xc0, 0xf1,
++      0x96, 0x1d, 0xfc, 0x1c, 0xae, 0x5e, 0x27, 0xf9, 0xd1, 0x26, 0xb4, 0x66,
++      0xd0, 0x77, 0xe9, 0xfb, 0xbf, 0xb6, 0x38, 0xe1, 0xb6, 0xcb, 0xef, 0x3c,
++      0xa7, 0xf0, 0x61, 0x1a, 0x50, 0x76, 0x81, 0x3e, 0x6a, 0x3e, 0x0c, 0x69,
++      0xd9, 0xf2, 0x80, 0xfd, 0x59, 0xb3, 0x58, 0x1e, 0x80, 0x36, 0x57, 0x81,
++      0xba, 0x2a, 0xa9, 0x9e, 0x3c, 0x46, 0x3e, 0xb0, 0x5e, 0x19, 0xf9, 0x86,
++      0xdd, 0x64, 0x9c, 0x12, 0xd1, 0xe3, 0x33, 0x25, 0x5e, 0x39, 0x3f, 0x96,
++      0xeb, 0x7e, 0x50, 0x71, 0x27, 0x05, 0xba, 0xc5, 0x7e, 0x96, 0x1b, 0x65,
++      0x3c, 0x7a, 0x18, 0x8f, 0x19, 0xa6, 0x07, 0xf2, 0x14, 0x0e, 0xa0, 0xc7,
++      0x34, 0xdc, 0xdb, 0x1a, 0x95, 0x7e, 0x0c, 0x5a, 0xf4, 0x17, 0xd5, 0x47,
++      0xe0, 0xa7, 0x51, 0xf6, 0xeb, 0x29, 0xa3, 0x9f, 0x28, 0x7c, 0xb3, 0xf5,
++      0x95, 0xd4, 0x7c, 0x4a, 0xb3, 0x33, 0xfe, 0x55, 0x05, 0x8e, 0x17, 0x54,
++      0x82, 0x1a, 0xf8, 0x56, 0x51, 0x1e, 0xfb, 0x8b, 0x26, 0x94, 0x7d, 0x52,
++      0xbf, 0x3b, 0x2a, 0x0f, 0xfd, 0x89, 0x01, 0xa2, 0xde, 0x82, 0x33, 0xf2,
++      0x9e, 0x52, 0x8b, 0xba, 0x92, 0x9a, 0xcf, 0xe9, 0xf8, 0x1e, 0xf0, 0x51,
++      0xc1, 0x6d, 0xbc, 0x32, 0x95, 0x9a, 0xb7, 0xc8, 0x4f, 0xb7, 0x11, 0xdf,
++      0xc1, 0xf5, 0xec, 0x07, 0xa6, 0xa1, 0x0d, 0x52, 0x6e, 0x0b, 0xdf, 0x53,
++      0xc7, 0xf7, 0x68, 0xa6, 0xba, 0x21, 0xf5, 0xfc, 0x73, 0x5e, 0xd5, 0x0b,
++      0x15, 0x1f, 0xc9, 0xba, 0xa1, 0xfc, 0x40, 0xf7, 0x87, 0xaf, 0x4c, 0xc9,
++      0xf3, 0x65, 0x8b, 0xd4, 0x91, 0x1b, 0x86, 0xbc, 0xef, 0x8d, 0x3a, 0x21,
++      0xbf, 0xe7, 0x89, 0x17, 0x79, 0x99, 0x5a, 0x0f, 0xff, 0xd2, 0xeb, 0x21,
++      0xd9, 0xe1, 0xd1, 0xce, 0x71, 0xfd, 0xeb, 0x97, 0xf7, 0x14, 0xb3, 0xde,
++      0xc5, 0xaa, 0xaf, 0xe9, 0x7a, 0x73, 0x9d, 0x6c, 0x33, 0xd7, 0xbb, 0x1f,
++      0xe6, 0x93, 0x75, 0x4b, 0xae, 0xaf, 0xcd, 0x67, 0xce, 0x27, 0x96, 0xb8,
++      0xc6, 0x44, 0x00, 0x73, 0x58, 0x2c, 0x20, 0xcf, 0xe5, 0xd8, 0x32, 0xeb,
++      0x5f, 0xba, 0x1d, 0xc0, 0xa5, 0xdd, 0xee, 0x23, 0xbe, 0xeb, 0x7d, 0xf2,
++      0xdc, 0xb4, 0x50, 0xf6, 0xa2, 0x0e, 0x96, 0x73, 0xbf, 0x5f, 0xca, 0x7a,
++      0xeb, 0xf2, 0x6a, 0x29, 0x1f, 0x3c, 0xd7, 0xfb, 0xcc, 0x7a, 0x5f, 0x98,
++      0xcf, 0x7e, 0x9f, 0x75, 0x1c, 0xf4, 0x71, 0x9f, 0xe5, 0x39, 0xc1, 0xb3,
++      0xe7, 0x0b, 0xa5, 0x17, 0xdf, 0x1f, 0x50, 0x7a, 0x68, 0xe4, 0xa7, 0xa9,
++      0x7e, 0x29, 0xa7, 0x50, 0x70, 0xd8, 0x88, 0xde, 0x6a, 0xd4, 0xdf, 0x99,
++      0xbd, 0xb0, 0xa3, 0xb7, 0x4a, 0xea, 0xa1, 0x7b, 0x25, 0x86, 0x3c, 0x17,
++      0xdc, 0x8f, 0xbe, 0x1c, 0xb6, 0xf2, 0xeb, 0xb7, 0xcc, 0x17, 0x64, 0xfb,
++      0xf2, 0xd9, 0xbe, 0xb0, 0x48, 0xaf, 0xf3, 0x6d, 0xe5, 0xd4, 0x0f, 0x98,
++      0xef, 0x05, 0xd5, 0x0f, 0x74, 0x3e, 0xc2, 0x99, 0xe5, 0x58, 0xe1, 0x64,
++      0x25, 0x67, 0x82, 0xe3, 0xa0, 0x8b, 0xf9, 0x9c, 0x59, 0xe7, 0x9b, 0xb9,
++      0x55, 0xd4, 0x57, 0x4e, 0x1f, 0xa1, 0xfe, 0xe0, 0x33, 0xe2, 0x34, 0xd5,
++      0x8e, 0xe3, 0x4f, 0x10, 0x77, 0x9a, 0xff, 0xc4, 0x3e, 0x7f, 0x36, 0x7c,
++      0x9d, 0x72, 0x7b, 0x6c, 0x76, 0x42, 0xf9, 0x47, 0x23, 0x7b, 0xa7, 0xfa,
++      0xd5, 0x9c, 0x6f, 0xc6, 0xdd, 0x6e, 0xc2, 0x1d, 0xfc, 0x98, 0xef, 0xfe,
++      0x0f, 0xde, 0x56, 0xf3, 0x41, 0x9f, 0x91, 0x9f, 0x03, 0x2e, 0xab, 0xfa,
++      0xbf, 0xd6, 0x88, 0x97, 0x83, 0x3c, 0xe7, 0xcd, 0x69, 0xf4, 0x4f, 0x64,
++      0x26, 0x4e, 0x4b, 0xad, 0xe4, 0xac, 0xe4, 0x5b, 0x1d, 0x39, 0xc8, 0x76,
++      0x5d, 0x76, 0xc0, 0xee, 0xae, 0xbd, 0x58, 0x5f, 0xe1, 0x7a, 0x7d, 0x8f,
++      0xeb, 0xe3, 0x4e, 0x0f, 0xe8, 0x4c, 0x35, 0xe1, 0x11, 0x39, 0x78, 0x5e,
++      0xc9, 0x27, 0xb9, 0xda, 0x1c, 0xe3, 0xf9, 0x92, 0x83, 0xed, 0xac, 0x20,
++      0x3f, 0x46, 0xee, 0x52, 0x3d, 0x70, 0x8a, 0xa6, 0xe5, 0x92, 0x96, 0xe8,
++      0xb8, 0xb1, 0x3e, 0x1b, 0x41, 0x5b, 0xd5, 0x80, 0x5f, 0x93, 0xee, 0x67,
++      0x6c, 0xbb, 0x2a, 0xf8, 0x7c, 0x3b, 0xd6, 0x6e, 0xae, 0x67, 0x09, 0xd6,
++      0xeb, 0xfd, 0x6a, 0x50, 0x7f, 0x0d, 0xe6, 0x84, 0x29, 0xea, 0x0b, 0x81,
++      0x48, 0xff, 0x04, 0xec, 0xe9, 0xd9, 0x0c, 0x7b, 0xef, 0x33, 0x0e, 0x4c,
++      0xfd, 0xa7, 0x06, 0xa9, 0xef, 0xf8, 0x87, 0x30, 0x67, 0xf8, 0x5d, 0x83,
++      0xb0, 0xa3, 0x67, 0x0e, 0xeb, 0xfb, 0xcf, 0x81, 0xfe, 0xf3, 0x3c, 0xce,
++      0x1d, 0x3a, 0xc2, 0xf8, 0x6c, 0xb6, 0x3e, 0xd7, 0xf5, 0x37, 0xf8, 0x7a,
++      0xab, 0xe5, 0xfd, 0x6f, 0x8d, 0xf1, 0xfc, 0x21, 0xa2, 0x34, 0xef, 0xbc,
++      0xa9, 0xcd, 0xf1, 0xba, 0x9b, 0xfb, 0xe2, 0x6d, 0x9e, 0x17, 0x7a, 0xd2,
++      0xe6, 0x85, 0x69, 0xd4, 0xe9, 0xb1, 0xb9, 0xb8, 0xdc, 0xd0, 0xeb, 0x65,
++      0xae, 0x95, 0x7f, 0x7d, 0x91, 0x22, 0xf6, 0x5b, 0x70, 0x1d, 0xe8, 0xc8,
++      0x3a, 0xf4, 0xeb, 0x9e, 0xc3, 0x8c, 0x4f, 0x23, 0xf9, 0x69, 0xcd, 0xec,
++      0x44, 0xfa, 0x79, 0x19, 0x3f, 0xed, 0xf3, 0x78, 0x3f, 0x6e, 0xd6, 0xa9,
++      0xba, 0x0f, 0xe7, 0x3a, 0xe8, 0x7d, 0x71, 0xcf, 0x98, 0x3f, 0xa7, 0x49,
++      0xff, 0xb2, 0xb1, 0x39, 0x92, 0x53, 0x2a, 0x0a, 0x29, 0x0e, 0x4b, 0xfc,
++      0xb3, 0xb0, 0x27, 0x92, 0x60, 0x1c, 0xfa, 0x9e, 0x05, 0x3d, 0xcc, 0x71,
++      0xa0, 0xfc, 0x7b, 0x75, 0x83, 0x46, 0xe7, 0xa6, 0xfa, 0x71, 0x8f, 0xca,
++      0xa3, 0xf4, 0xb9, 0x58, 0xc5, 0x45, 0x49, 0x03, 0xad, 0x45, 0xd7, 0x21,
++      0xb2, 0x53, 0xf7, 0xa7, 0x8c, 0x27, 0x1d, 0x2b, 0xee, 0xdb, 0xa9, 0xf1,
++      0x22, 0xe3, 0x49, 0xc5, 0xad, 0x39, 0xce, 0xcc, 0x71, 0x94, 0x1a, 0x3f,
++      0x7e, 0xea, 0x2f, 0x7a, 0x31, 0xa0, 0x77, 0x89, 0x2b, 0x92, 0x18, 0x7e,
++      0x38, 0x8e, 0xa7, 0x80, 0x63, 0x84, 0xf5, 0xd6, 0xa2, 0x34, 0x8f, 0x3e,
++      0x25, 0x86, 0xd8, 0x9f, 0xd3, 0xd5, 0x9c, 0xff, 0x15, 0xf0, 0x67, 0xdf,
++      0x0a, 0xe8, 0xd3, 0xc7, 0x79, 0x74, 0x87, 0xe7, 0x0c, 0xc4, 0x81, 0x5b,
++      0xeb, 0x9c, 0x60, 0xbf, 0x73, 0x3c, 0x76, 0x33, 0x0e, 0xb7, 0x81, 0x83,
++      0xa6, 0x70, 0x88, 0x1a, 0x38, 0xa8, 0x7a, 0x63, 0x96, 0x53, 0xa0, 0xc7,
++      0x93, 0xa4, 0x4b, 0xb4, 0xab, 0x34, 0x8f, 0xe5, 0xb0, 0xdd, 0x3a, 0x5f,
++      0x83, 0xb4, 0xcf, 0xcf, 0xf6, 0xf9, 0xc4, 0xbe, 0x35, 0xe6, 0x73, 0x79,
++      0x7c, 0xce, 0xab, 0x9f, 0xc3, 0x3e, 0xf2, 0x55, 0xcb, 0x82, 0xaf, 0xc4,
++      0x51, 0xc9, 0x4d, 0xcf, 0x4b, 0x33, 0x9e, 0x54, 0xa9, 0xe9, 0x0f, 0xf5,
++      0x48, 0xf7, 0x1b, 0xd5, 0x2d, 0xcd, 0xa8, 0x43, 0xf7, 0xa8, 0xae, 0x7b,
++      0x4f, 0xf7, 0xa2, 0x6e, 0x9c, 0xee, 0x3d, 0xcb, 0x7d, 0x98, 0x71, 0x69,
++      0xa1, 0xf7, 0x83, 0x8e, 0x5d, 0x45, 0x6a, 0x1d, 0x4a, 0xd5, 0xa3, 0xcc,
++      0xa4, 0x87, 0xba, 0x77, 0xb1, 0x39, 0x01, 0x73, 0xea, 0x16, 0x9a, 0x13,
++      0x3c, 0xc6, 0xbc, 0x9d, 0xda, 0x4f, 0x26, 0x1f, 0x3c, 0x6e, 0x3f, 0xd9,
++      0xd9, 0x60, 0xbe, 0xaf, 0x46, 0x4c, 0x8e, 0xe3, 0x9e, 0x16, 0xee, 0xdf,
++      0xbb, 0x39, 0xcf, 0xaf, 0x7b, 0x03, 0x74, 0x6f, 0xc7, 0x2b, 0x64, 0xaf,
++      0x08, 0xe5, 0xc1, 0xbe, 0x8e, 0xed, 0xf8, 0xde, 0xe1, 0xc3, 0x7e, 0xa9,
++      0x0f, 0xbf, 0xa3, 0xb4, 0xb8, 0x35, 0xe2, 0x2f, 0xf5, 0x81, 0x86, 0xb8,
++      0x3e, 0x4c, 0x1a, 0xef, 0x09, 0xd0, 0x51, 0x57, 0xb6, 0xf7, 0x04, 0xde,
++      0x65, 0x17, 0x5d, 0xa8, 0x1f, 0xa2, 0x06, 0x73, 0x74, 0x53, 0x95, 0x46,
++      0xdf, 0x5b, 0x6b, 0xd0, 0xa7, 0x51, 0x9f, 0x33, 0xed, 0x2a, 0x43, 0xbc,
++      0x96, 0x26, 0xdf, 0x1d, 0xe6, 0xf7, 0x89, 0x16, 0x49, 0x18, 0xf3, 0x7f,
++      0xaa, 0x1e, 0xc8, 0x33, 0x29, 0x9f, 0x96, 0xfa, 0x9c, 0xfd, 0x28, 0xef,
++      0x12, 0x07, 0xcf, 0x6d, 0x77, 0xf9, 0x77, 0x82, 0x42, 0x71, 0x69, 0x1c,
++      0x38, 0x4c, 0x8e, 0x5b, 0xe5, 0xb1, 0xd4, 0x43, 0xdd, 0x03, 0xbb, 0x94,
++      0x9d, 0xc9, 0x7b, 0xa1, 0xd7, 0x5e, 0xd6, 0xff, 0x06, 0xfd, 0x9e, 0x11,
++      0x62, 0x7b, 0xa5, 0x5c, 0xec, 0x6f, 0xa5, 0xf7, 0x53, 0x8e, 0x88, 0x19,
++      0xeb, 0xd4, 0x77, 0x4d, 0x0b, 0xe9, 0x55, 0xc0, 0xfd, 0x3d, 0x64, 0x9a,
++      0x43, 0xc0, 0x1f, 0xac, 0x03, 0x1d, 0xa9, 0x53, 0x7e, 0x53, 0xfe, 0x55,
++      0xfe, 0x84, 0xdf, 0x43, 0xf5, 0xc4, 0xd6, 0xd8, 0x51, 0x4f, 0x09, 0x5f,
++      0xd7, 0x31, 0xab, 0xfa, 0x3d, 0xce, 0xef, 0x0c, 0x4b, 0xfe, 0x77, 0xc4,
++      0x77, 0x61, 0x34, 0xd8, 0x9f, 0x99, 0x26, 0xe7, 0x7c, 0xc1, 0x7f, 0xe6,
++      0xf7, 0x82, 0x43, 0x5c, 0xcc, 0xe1, 0xed, 0x06, 0x35, 0xff, 0x66, 0x7b,
++      0xf7, 0x48, 0x3b, 0xba, 0x1f, 0xa4, 0xcf, 0xd3, 0xc9, 0x79, 0x58, 0xd9,
++      0x2b, 0xcf, 0xd5, 0x71, 0x1c, 0x7b, 0x44, 0xd3, 0x16, 0xfc, 0xce, 0xe1,
++      0x77, 0x23, 0x6f, 0xfc, 0x6e, 0xab, 0xf7, 0xa9, 0x1e, 0x47, 0xb9, 0x54,
++      0x30, 0x96, 0x16, 0xe4, 0x92, 0x7d, 0x27, 0x2e, 0x7f, 0x43, 0x6c, 0x1f,
++      0x25, 0xf2, 0xb0, 0x5f, 0xd4, 0x84, 0x6b, 0x9c, 0x14, 0xf7, 0x0e, 0x71,
++      0x14, 0x79, 0xf1, 0xe1, 0x08, 0xe8, 0x07, 0xe2, 0x65, 0xc8, 0x29, 0x18,
++      0xa0, 0xbe, 0xea, 0x29, 0x02, 0xcc, 0xf1, 0x04, 0xc7, 0x7b, 0xb1, 0x9d,
++      0x7e, 0x87, 0x5d, 0x10, 0x3e, 0xfe, 0x9d, 0x8c, 0xf3, 0x17, 0x71, 0xed,
++      0x34, 0xf9, 0xff, 0x51, 0xe3, 0x1c, 0xfd, 0x33, 0xc1, 0x7e, 0xe7, 0x78,
++      0xf7, 0xa4, 0xc7, 0xbb, 0xc2, 0xa9, 0xd8, 0x6e, 0x19, 0xdf, 0xeb, 0x33,
++      0xe3, 0x5b, 0xe9, 0x97, 0xda, 0x3f, 0x33, 0xe5, 0xe3, 0x1d, 0x75, 0xe9,
++      0x89, 0xc5, 0x37, 0xe8, 0xd6, 0x4a, 0x79, 0x7f, 0x51, 0xc6, 0xbc, 0x9c,
++      0x9e, 0x7f, 0xa8, 0x77, 0xd5, 0x7a, 0x3c, 0xfc, 0x07, 0xd7, 0x0d, 0x36,
++      0x4f, 0xf0, 0x16, 0x00, 0x00, 0x00 };
+ static u8 bnx2_TPAT_b09FwText[] = {
+-      0xbd, 0x58, 0x5d, 0x6c, 0x1c, 0x57, 0x15, 0x3e, 0x73, 0xe7, 0xee, 0xee,
+-      0x78, 0xb1, 0xe3, 0x71, 0x3b, 0xa4, 0xdb, 0x62, 0xc8, 0x8c, 0x7d, 0xfd,
+-      0x03, 0xb6, 0xc2, 0x94, 0x6e, 0xdb, 0xad, 0x18, 0x45, 0xc3, 0xec, 0xda,
+-      0xb1, 0xa2, 0x3c, 0xb8, 0x52, 0xa4, 0x46, 0x6a, 0x04, 0x66, 0x1d, 0x93,
+-      0x3e, 0xa6, 0x88, 0x07, 0xa4, 0x3e, 0x64, 0x59, 0x3b, 0xa9, 0x1f, 0x96,
+-      0x2c, 0xb8, 0xc8, 0x7e, 0x41, 0x28, 0x72, 0x6a, 0xbb, 0x48, 0x8b, 0x37,
+-      0x11, 0x48, 0x3c, 0x45, 0x8d, 0x1c, 0x14, 0x55, 0xea, 0x0b, 0x0f, 0xfc,
+-      0x3d, 0x46, 0x6a, 0x45, 0xfb, 0x50, 0x90, 0x55, 0xa9, 0xa8, 0x82, 0xe0,
+-      0xcb, 0x77, 0x66, 0x67, 0x9c, 0x4d, 0xec, 0x08, 0x9e, 0xb0, 0xb4, 0xba,
+-      0x33, 0x73, 0xef, 0x39, 0xf7, 0xdc, 0x73, 0xbe, 0xef, 0x9c, 0x73, 0x3d,
+-      0x64, 0x50, 0x9e, 0x92, 0xbf, 0x3e, 0xfc, 0x8a, 0xdf, 0xbd, 0xf8, 0x83,
+-      0x67, 0x8f, 0xbf, 0x70, 0x1c, 0x8f, 0xcf, 0x1b, 0xfd, 0x59, 0x49, 0xff,
+-      0xc7, 0x3f, 0x93, 0xc8, 0x4e, 0xed, 0xe0, 0x1f, 0x59, 0x22, 0xb8, 0xfd,
+-      0x54, 0xa4, 0xc8, 0x32, 0x83, 0xdf, 0x7c, 0x6d, 0x5e, 0x11, 0x85, 0xad,
+-      0x09, 0xb7, 0x4c, 0xff, 0xd6, 0x35, 0x47, 0x12, 0x7f, 0xff, 0x72, 0x70,
+-      0xff, 0xeb, 0xb7, 0x5e, 0xf4, 0x76, 0xaf, 0x99, 0x64, 0xd9, 0xc1, 0xb2,
+-      0xb4, 0x47, 0xc9, 0x1a, 0x84, 0xcc, 0xcf, 0xc7, 0xbe, 0x2d, 0xe8, 0x48,
+-      0xaa, 0xab, 0xa6, 0x85, 0xba, 0xa7, 0x6f, 0x8d, 0x29, 0xbb, 0x8e, 0x0d,
+-      0x6e, 0xb4, 0x5d, 0x8a, 0xda, 0x05, 0x7a, 0xb7, 0xed, 0xd0, 0xcd, 0xb6,
+-      0xa4, 0x85, 0xb7, 0x2e, 0xd1, 0x92, 0xef, 0x15, 0x2a, 0xa6, 0x45, 0x22,
+-      0xf0, 0x0a, 0x55, 0x72, 0x69, 0xc3, 0xf7, 0x6a, 0x73, 0xe6, 0x80, 0x61,
+-      0x05, 0x16, 0xbd, 0x31, 0x26, 0xe8, 0x9a, 0x73, 0x8e, 0xbe, 0xa7, 0xce,
+-      0xe2, 0x27, 0x49, 0xac, 0x48, 0xa3, 0xbc, 0x26, 0x49, 0xae, 0xf4, 0xd3,
+-      0x49, 0x5f, 0xeb, 0x79, 0x3f, 0x84, 0xfc, 0xf0, 0xf8, 0x05, 0xea, 0xa1,
+-      0x9a, 0xed, 0xcd, 0x10, 0x65, 0x78, 0x0d, 0x45, 0x7e, 0x86, 0x42, 0xbb,
+-      0x73, 0xae, 0x6b, 0xf1, 0x78, 0x5f, 0x6f, 0x40, 0xbe, 0x47, 0xa5, 0xf3,
+-      0x4f, 0x24, 0xf3, 0x76, 0x32, 0x2f, 0x48, 0xac, 0x7a, 0xee, 0x16, 0x8d,
+-      0x84, 0xd2, 0xd8, 0xd3, 0x91, 0x3a, 0x6a, 0x47, 0x5b, 0x92, 0xcc, 0x15,
+-      0xb6, 0x5f, 0xd9, 0x65, 0xd2, 0x90, 0x31, 0x59, 0x46, 0x8a, 0xe0, 0xfb,
+-      0x88, 0xdb, 0x48, 0x28, 0x0c, 0xa2, 0x9d, 0x46, 0xc1, 0x8e, 0xda, 0x3f,
+-      0x34, 0xa2, 0xe6, 0x9e, 0x0e, 0x65, 0x9e, 0x84, 0x0a, 0x8d, 0x68, 0x8b,
+-      0x75, 0xf5, 0x90, 0x54, 0x39, 0xc8, 0x0c, 0xdb, 0x82, 0x78, 0x8c, 0x92,
+-      0xef, 0xac, 0xbb, 0x82, 0xe7, 0x69, 0x23, 0xdc, 0x92, 0x46, 0xb4, 0x36,
+-      0x83, 0x67, 0x0b, 0xf2, 0xf0, 0x8b, 0x6f, 0x50, 0x38, 0x6b, 0x40, 0x8e,
+-      0xcf, 0x69, 0xe3, 0x5d, 0x50, 0xe8, 0xd8, 0xb4, 0x58, 0xf4, 0x0a, 0x35,
+-      0x3a, 0x65, 0x94, 0xb7, 0x0e, 0x04, 0xcd, 0x9e, 0x69, 0x1f, 0xfc, 0xc6,
+-      0xb6, 0x7c, 0x4b, 0x6a, 0x2d, 0x9e, 0xcd, 0x25, 0x67, 0x64, 0x7d, 0x61,
+-      0xc7, 0x7e, 0x87, 0xdf, 0x61, 0x73, 0x13, 0xb6, 0xb7, 0xb2, 0xb0, 0x47,
+-      0x6b, 0xde, 0x27, 0x52, 0x65, 0xd8, 0x19, 0xe2, 0xe7, 0x2d, 0x57, 0x01,
+-      0x85, 0xa1, 0xd5, 0x3e, 0x72, 0x07, 0xb4, 0xae, 0xf8, 0x9e, 0xbd, 0x45,
+-      0x01, 0x2d, 0x36, 0x07, 0xed, 0xa9, 0x66, 0x1d, 0xf3, 0x35, 0x5e, 0x03,
+-      0x7f, 0x10, 0x4d, 0xb5, 0xb4, 0xde, 0xf4, 0x7f, 0x9b, 0xa1, 0x23, 0x62,
+-      0x32, 0x43, 0x9e, 0x1b, 0xe2, 0xdb, 0xd0, 0xe6, 0xa3, 0x3e, 0x3b, 0x96,
+-      0xd8, 0xc0, 0x7e, 0xc7, 0x3e, 0xfe, 0x97, 0x92, 0xf7, 0x5e, 0x3b, 0x5a,
+-      0x4b, 0xfd, 0x1c, 0xdb, 0x0d, 0xbf, 0xfa, 0x14, 0x15, 0x61, 0xff, 0x63,
+-      0xcf, 0x94, 0xca, 0xb1, 0x2d, 0x6c, 0x37, 0xd6, 0xab, 0x07, 0x36, 0xbd,
+-      0x7a, 0xc0, 0x26, 0xb6, 0x47, 0x90, 0x5c, 0xb5, 0x68, 0x49, 0x7d, 0x64,
+-      0xd0, 0x11, 0xad, 0x97, 0x7c, 0x69, 0x54, 0xd6, 0x3e, 0x4b, 0x9e, 0x81,
+-      0xc3, 0x26, 0x70, 0xd8, 0x04, 0x2e, 0x9b, 0x64, 0x8b, 0xc0, 0xa5, 0x5b,
+-      0x63, 0x16, 0xdd, 0x33, 0x11, 0xcf, 0x36, 0xcf, 0xe7, 0xa8, 0xee, 0x2b,
+-      0xba, 0xdc, 0x64, 0xcf, 0xe4, 0x68, 0x51, 0x7d, 0xae, 0xcf, 0xc3, 0x1f,
+-      0x6f, 0x93, 0x3e, 0x16, 0x01, 0xb3, 0x11, 0xdc, 0xf9, 0x86, 0x1a, 0xa7,
+-      0xcb, 0x6d, 0x45, 0xf5, 0x36, 0xcb, 0x2d, 0x51, 0x47, 0xae, 0x1f, 0x72,
+-      0x93, 0x90, 0x2b, 0xd2, 0x95, 0x58, 0xb6, 0x1f, 0xb2, 0xbb, 0x89, 0xec,
+-      0x44, 0x61, 0x9a, 0x7c, 0xc8, 0x0c, 0xbb, 0xd3, 0xc0, 0xdc, 0x9c, 0x33,
+-      0x09, 0xd9, 0x49, 0x5a, 0xc2, 0xaf, 0xde, 0xa4, 0x9a, 0x2c, 0xb2, 0x5e,
+-      0xaf, 0x70, 0x9e, 0x7d, 0x1e, 0xeb, 0xac, 0x41, 0xa7, 0x83, 0x39, 0x0b,
+-      0x7a, 0x24, 0xc6, 0x0f, 0x75, 0xbd, 0x09, 0x6c, 0x3b, 0xfc, 0xfc, 0xae,
+-      0x16, 0x01, 0xfc, 0x50, 0x54, 0x6e, 0x9d, 0xf8, 0x3d, 0x4b, 0x65, 0xc4,
+-      0x52, 0xa8, 0x7e, 0xaa, 0xda, 0x86, 0x21, 0x02, 0x93, 0xaa, 0xf0, 0x42,
+-      0x38, 0x2b, 0xe3, 0x6f, 0x73, 0xb6, 0x01, 0x8e, 0x1d, 0x17, 0x9d, 0x9c,
+-      0x93, 0xc1, 0x1a, 0xc4, 0x5f, 0xf5, 0x52, 0xd5, 0x19, 0xc0, 0x5a, 0x10,
+-      0x2d, 0x3f, 0x02, 0x8e, 0x0e, 0x60, 0x0d, 0x8f, 0x1c, 0x07, 0xac, 0x57,
+-      0xbc, 0xbe, 0x17, 0x36, 0xa6, 0xdf, 0x7a, 0xa9, 0xf6, 0x50, 0x7c, 0xd8,
+-      0xc6, 0x38, 0x2e, 0xd8, 0x5f, 0x26, 0xb1, 0xed, 0x8e, 0x57, 0x3a, 0x6f,
+-      0x63, 0x7e, 0xe7, 0xab, 0x82, 0x76, 0xf5, 0x75, 0x15, 0x15, 0xf0, 0xe9,
+-      0xf3, 0x8a, 0x0a, 0x07, 0xcc, 0x18, 0x4b, 0x29, 0xa6, 0x78, 0xe4, 0x7c,
+-      0x43, 0x85, 0x79, 0x65, 0x98, 0x4b, 0x93, 0x4f, 0x52, 0xcd, 0xf1, 0xfc,
+-      0x32, 0x15, 0x68, 0xa9, 0x39, 0x01, 0xdf, 0xf5, 0xe3, 0xdc, 0x9e, 0x4f,
+-      0x34, 0x8c, 0xe7, 0xf0, 0x69, 0xc8, 0x20, 0x5f, 0xd4, 0xa0, 0x8b, 0xc7,
+-      0x41, 0xe8, 0xf7, 0x60, 0x23, 0xfc, 0xa1, 0x26, 0xec, 0x29, 0xf8, 0x23,
+-      0x74, 0x78, 0x8e, 0xf3, 0x98, 0xf3, 0x4c, 0xa4, 0x3c, 0xbf, 0x1a, 0xdb,
+-      0xe2, 0xd9, 0xb7, 0x89, 0xf3, 0x51, 0x9a, 0x83, 0x38, 0x27, 0x59, 0x73,
+-      0x32, 0xa0, 0xd9, 0x7a, 0xe3, 0x92, 0x36, 0x15, 0xcd, 0x65, 0x03, 0xc6,
+-      0x6e, 0x6f, 0x09, 0x58, 0x9c, 0xad, 0xb7, 0x06, 0x4f, 0xef, 0x34, 0xa8,
+-      0xf6, 0x4c, 0x20, 0x8e, 0x0a, 0xec, 0x1f, 0xf9, 0xcc, 0x29, 0xec, 0xd5,
+-      0x1e, 0x3c, 0x7d, 0xa7, 0x71, 0x0c, 0xbe, 0xa2, 0xfb, 0xf0, 0x3f, 0xf6,
+-      0xdf, 0x79, 0xda, 0x84, 0x9d, 0x1c, 0x33, 0x70, 0x2b, 0x7c, 0x75, 0xcc,
+-      0x00, 0x96, 0xf1, 0x0c, 0x6c, 0xd4, 0xda, 0x83, 0x73, 0x22, 0xa8, 0x51,
+-      0xd8, 0x5e, 0xc2, 0xcf, 0xa2, 0xa9, 0x86, 0x65, 0xdd, 0x81, 0x4e, 0x51,
+-      0xf4, 0xdc, 0xc8, 0xdc, 0x65, 0xae, 0xf0, 0x39, 0x58, 0x97, 0x65, 0x04,
+-      0xae, 0x1c, 0x6a, 0xf5, 0xbc, 0x22, 0x82, 0x00, 0x98, 0x90, 0x88, 0x4d,
+-      0x11, 0x58, 0xe1, 0x38, 0x5c, 0x45, 0x1c, 0x80, 0x03, 0xd8, 0x0c, 0xff,
+-      0xd7, 0x44, 0x70, 0x91, 0x2a, 0x45, 0xa2, 0xc5, 0x06, 0x61, 0x3f, 0xec,
+-      0x55, 0xc2, 0x0f, 0x78, 0x0e, 0xed, 0x12, 0x6c, 0xf0, 0xc2, 0x1a, 0x79,
+-      0xfe, 0x1c, 0xbc, 0x9e, 0xfb, 0x31, 0x59, 0x99, 0xe0, 0x9c, 0xdc, 0x68,
+-      0x90, 0x25, 0x83, 0xb3, 0x72, 0xa9, 0x31, 0xec, 0xff, 0x15, 0xbe, 0x26,
+-      0xf2, 0xc6, 0x37, 0x69, 0xc2, 0xdf, 0x04, 0x6f, 0xeb, 0xf8, 0x5d, 0x21,
+-      0xde, 0xfb, 0x9c, 0x1c, 0x69, 0xf1, 0x78, 0x56, 0xaa, 0x56, 0xb7, 0xde,
+-      0xbf, 0x69, 0xf6, 0xfb, 0x3d, 0x2a, 0xd1, 0x9b, 0xc9, 0xde, 0xf0, 0x0d,
+-      0x9d, 0x6c, 0x94, 0x80, 0xef, 0x03, 0xfa, 0x4b, 0xa9, 0xfe, 0xad, 0x58,
+-      0x37, 0x63, 0x77, 0xc2, 0xdf, 0x3a, 0x74, 0x8f, 0xa3, 0x69, 0x7e, 0x42,
+-      0x1e, 0xec, 0xe4, 0xeb, 0xc5, 0x66, 0x0e, 0x9c, 0xd0, 0xba, 0xaa, 0x7e,
+-      0x8f, 0xf3, 0xe6, 0x81, 0x5f, 0x1b, 0x3f, 0xc4, 0x72, 0x96, 0xe7, 0x0c,
+-      0xaa, 0xa2, 0x0e, 0xd5, 0xdb, 0xfc, 0xcc, 0x73, 0x9c, 0xcf, 0x72, 0x18,
+-      0xff, 0x8c, 0xb5, 0x1f, 0xea, 0x5a, 0x9b, 0xb9, 0xc6, 0xbe, 0x02, 0x47,
+-      0xda, 0x96, 0x51, 0x6e, 0x92, 0x51, 0x69, 0x92, 0x5b, 0xf5, 0x65, 0x1c,
+-      0x97, 0xd0, 0xb6, 0xe1, 0x53, 0xc6, 0xc3, 0xa4, 0x8c, 0x1a, 0x46, 0x5c,
+-      0xc3, 0x0c, 0x3c, 0x0f, 0xb5, 0x7e, 0x9d, 0x01, 0x27, 0x42, 0xf8, 0x5f,
+-      0x2c, 0x20, 0x47, 0x5e, 0x73, 0xa8, 0x5f, 0xa8, 0x39, 0x51, 0x77, 0xa8,
+-      0x4f, 0x28, 0xb6, 0xed, 0x3d, 0x01, 0xdb, 0x78, 0x3e, 0xac, 0xfa, 0xbf,
+-      0xc2, 0x9e, 0x41, 0xcc, 0xc7, 0x4a, 0x23, 0xcd, 0xfb, 0xd0, 0xa9, 0x38,
+-      0x67, 0x58, 0x49, 0xfe, 0x8f, 0x92, 0xdc, 0x2e, 0x81, 0x5b, 0xad, 0x5f,
+-      0x46, 0x5e, 0xaf, 0xc7, 0xb8, 0xf1, 0x6a, 0xae, 0xd8, 0xd3, 0xc3, 0xa3,
+-      0xcc, 0x51, 0xad, 0x2f, 0xfa, 0xd3, 0x58, 0x2b, 0x4d, 0xca, 0xcf, 0x20,
+-      0xb7, 0x73, 0x3d, 0x60, 0xdb, 0x02, 0xd8, 0xd6, 0xd7, 0xc9, 0xfb, 0xa8,
+-      0x09, 0xf5, 0xb8, 0x06, 0xf4, 0x90, 0xa9, 0x0c, 0xfc, 0x3c, 0x77, 0x8e,
+-      0xf8, 0x3b, 0xf5, 0x08, 0xbc, 0x57, 0xc1, 0xeb, 0xa5, 0xe2, 0x29, 0xa3,
+-      0xb2, 0x75, 0xcc, 0x4c, 0xfa, 0x08, 0xd8, 0x0d, 0x5e, 0x3b, 0x2c, 0x97,
+-      0x85, 0x5c, 0x1f, 0x64, 0xbe, 0x82, 0xb9, 0x0c, 0xc6, 0x6e, 0x3d, 0x71,
+-      0x2d, 0xc1, 0x5e, 0x2e, 0xf6, 0x9a, 0x21, 0x19, 0xe4, 0x51, 0xaf, 0x47,
+-      0xdc, 0x0a, 0x3d, 0x97, 0xd4, 0x6d, 0xe6, 0xf2, 0x89, 0x2e, 0x2e, 0xbb,
+-      0x64, 0xc6, 0x9c, 0x78, 0x29, 0xc9, 0x41, 0x9c, 0xc7, 0x5f, 0x48, 0xe6,
+-      0x1d, 0xe4, 0xe3, 0xe7, 0x92, 0xba, 0x62, 0xe1, 0x39, 0xa0, 0xe5, 0x38,
+-      0x37, 0x67, 0x39, 0x37, 0x17, 0x90, 0x9b, 0x4b, 0xe0, 0xa7, 0xff, 0x31,
+-      0x19, 0xc8, 0x4d, 0x44, 0xbf, 0x6b, 0x48, 0xe4, 0x21, 0x13, 0xf2, 0xdc,
+-      0x1b, 0xcc, 0xc1, 0x36, 0xcf, 0xfe, 0x18, 0x67, 0x0a, 0xcf, 0x70, 0xde,
+-      0xd4, 0x3a, 0x13, 0x28, 0xf7, 0x32, 0x8d, 0x16, 0x2e, 0x23, 0x4f, 0x9a,
+-      0x34, 0x81, 0xdd, 0x78, 0xdf, 0xb4, 0x96, 0xa7, 0x3d, 0x05, 0xff, 0xbd,
+-      0x6f, 0x90, 0xe2, 0xfa, 0xfb, 0x1d, 0xe8, 0x18, 0x71, 0xa7, 0xc0, 0xfb,
+-      0xc5, 0xd2, 0x7f, 0x93, 0xf9, 0x43, 0x22, 0x83, 0xba, 0x56, 0xe4, 0x7d,
+-      0x89, 0x2a, 0x2d, 0xf6, 0x83, 0xdf, 0x85, 0x07, 0x1f, 0x78, 0x20, 0xaa,
+-      0x36, 0xc1, 0x3f, 0xc4, 0x38, 0xc6, 0x1a, 0xd6, 0x8b, 0x22, 0x72, 0xaa,
+-      0xc3, 0xb8, 0x66, 0xbc, 0x9f, 0x49, 0xf0, 0x3e, 0x0b, 0xbc, 0x7b, 0xe3,
+-      0x37, 0xc0, 0xa3, 0x1b, 0x0f, 0xf1, 0xe8, 0x4c, 0x82, 0xf1, 0x59, 0x60,
+-      0xfc, 0x97, 0xc0, 0x96, 0x85, 0x9a, 0x0e, 0xdc, 0x36, 0xc8, 0x88, 0x50,
+-      0x1b, 0x80, 0x83, 0x44, 0xcf, 0xe9, 0x44, 0xcf, 0xcc, 0x63, 0xf4, 0x9c,
+-      0x4e, 0xf4, 0xcc, 0x74, 0xeb, 0x81, 0x5c, 0x25, 0x91, 0x0b, 0x1f, 0x23,
+-      0x57, 0x49, 0xe4, 0xc2, 0x2e, 0x39, 0x0b, 0x67, 0xe2, 0x73, 0x71, 0x1e,
+-      0xdb, 0x45, 0x2c, 0x7c, 0x8a, 0xb1, 0x62, 0x87, 0x18, 0xef, 0x61, 0x04,
+-      0x66, 0x9a, 0x37, 0xb1, 0x96, 0xfd, 0x90, 0x61, 0x0e, 0x3c, 0xe2, 0xbb,
+-      0x3d, 0xf8, 0x6e, 0x1f, 0xef, 0xf8, 0xfb, 0x66, 0x82, 0x15, 0xae, 0x45,
+-      0x5e, 0x2d, 0x7c, 0x68, 0x6d, 0x46, 0xb0, 0x9f, 0xc5, 0xd5, 0xc3, 0x62,
+-      0x60, 0x61, 0x0e, 0x35, 0xa7, 0x69, 0x52, 0x59, 0x32, 0x57, 0x5f, 0x91,
+-      0x31, 0x76, 0xb7, 0xb1, 0x7e, 0xbb, 0xc3, 0xab, 0x99, 0x46, 0x8e, 0x68,
+-      0xbd, 0x97, 0x16, 0x50, 0x4f, 0xce, 0x03, 0x4b, 0xd7, 0x7d, 0xb0, 0x90,
+-      0x86, 0x81, 0x0b, 0x0d, 0x5c, 0x7b, 0x71, 0x6c, 0x23, 0xb5, 0x08, 0x66,
+-      0xfc, 0x88, 0x76, 0x26, 0xf3, 0x94, 0xd9, 0xec, 0xd4, 0x43, 0xb9, 0xde,
+-      0xbd, 0x8f, 0x8b, 0x7d, 0x02, 0xd4, 0xe0, 0x3f, 0xa2, 0x17, 0x70, 0x48,
+-      0x8e, 0x22, 0x97, 0x36, 0x39, 0x27, 0x80, 0xa3, 0x9b, 0x5c, 0xeb, 0x39,
+-      0xe7, 0x5a, 0xc0, 0x62, 0x9a, 0x7f, 0x72, 0xe8, 0x5b, 0x3e, 0x41, 0xed,
+-      0x10, 0x34, 0x5f, 0xd4, 0x7a, 0xca, 0xff, 0x04, 0xb8, 0xc2, 0xb7, 0x75,
+-      0x9e, 0xdb, 0xc5, 0x77, 0xfe, 0x66, 0x51, 0x76, 0xf5, 0x49, 0xec, 0x89,
+-      0xfd, 0xce, 0xf0, 0xfa, 0x1c, 0x7a, 0x1a, 0xce, 0xf3, 0x18, 0xd7, 0xf9,
+-      0xdd, 0x48, 0x7c, 0x6a, 0x62, 0xfc, 0x02, 0x46, 0x3e, 0x4f, 0x0f, 0xce,
+-      0xa7, 0xf5, 0x5d, 0x9f, 0x9f, 0xb5, 0x96, 0x41, 0x2f, 0x95, 0x1b, 0x0a,
+-      0xf5, 0x7d, 0xa4, 0xb0, 0x00, 0x9e, 0x95, 0x5b, 0xe9, 0x3c, 0xcf, 0xd9,
+-      0x5d, 0x73, 0x78, 0x6e, 0xf1, 0x77, 0x41, 0x3b, 0x6a, 0x11, 0x75, 0x11,
+-      0xfd, 0xd3, 0x3a, 0xf7, 0x61, 0xdc, 0x53, 0xc5, 0xf5, 0x72, 0x9c, 0x7b,
+-      0xb0, 0x77, 0x90, 0xff, 0xd7, 0xc1, 0x29, 0xf0, 0xfb, 0x29, 0x41, 0x4f,
+-      0x50, 0xd9, 0x49, 0xcf, 0xa3, 0x35, 0x38, 0x5b, 0x30, 0x0d, 0xe6, 0xe2,
+-      0xb0, 0x3d, 0x4d, 0xdc, 0x6b, 0x8d, 0x84, 0x55, 0x96, 0x69, 0x21, 0x1f,
+-      0xac, 0x68, 0xaa, 0x76, 0xf4, 0xd8, 0xb3, 0xc8, 0xd1, 0xd1, 0x4f, 0xb8,
+-      0xb6, 0xb1, 0x6f, 0x4f, 0xc0, 0x1e, 0xf4, 0x05, 0xeb, 0x92, 0xde, 0x6e,
+-      0xb0, 0x9e, 0x3c, 0x99, 0xe8, 0x11, 0x97, 0xfd, 0x54, 0xcf, 0x9f, 0xa0,
+-      0x87, 0x1c, 0x41, 0xdc, 0xff, 0x4a, 0xe8, 0x62, 0x1f, 0x64, 0xd0, 0x8f,
+-      0x8f, 0xd3, 0xbc, 0x5a, 0x8c, 0x6b, 0xf1, 0x79, 0xd4, 0xde, 0xa8, 0x98,
+-      0x85, 0xef, 0x72, 0xb1, 0x9e, 0x7a, 0xf3, 0x5f, 0x9a, 0xf3, 0x0f, 0xea,
+-      0x24, 0xf4, 0xe3, 0xbd, 0x8d, 0xb9, 0x95, 0x80, 0xde, 0x6c, 0xc6, 0xb5,
+-      0xdb, 0xbe, 0x88, 0x9e, 0xbf, 0xd2, 0xf8, 0x47, 0xda, 0xcb, 0x84, 0xc0,
+-      0x71, 0xe1, 0x02, 0x7c, 0x23, 0xb7, 0x7b, 0xe9, 0x35, 0xf4, 0xa8, 0x99,
+-      0x15, 0xd4, 0x65, 0xf8, 0x4d, 0x5c, 0xad, 0x8d, 0x73, 0x9f, 0x79, 0x03,
+-      0x5c, 0x9f, 0x2f, 0x2a, 0xdf, 0x34, 0x46, 0x69, 0xf9, 0x67, 0x5c, 0x67,
+-      0xe2, 0x7a, 0x0d, 0xfc, 0xb8, 0x74, 0xa5, 0xa5, 0x68, 0xb9, 0x65, 0xc3,
+-      0x2e, 0xfb, 0x41, 0x2f, 0xae, 0x38, 0x1f, 0x57, 0xf0, 0x8b, 0xf3, 0x2d,
+-      0xce, 0x04, 0x3e, 0x04, 0xec, 0x0f, 0xee, 0xbd, 0x39, 0x66, 0x9c, 0xff,
+-      0x4e, 0xe1, 0x99, 0xcf, 0xca, 0xbd, 0x32, 0xfb, 0x81, 0x7b, 0xe2, 0xee,
+-      0xfe, 0x9d, 0x73, 0x23, 0x74, 0x6e, 0x33, 0x87, 0xb8, 0x47, 0xa9, 0xc8,
+-      0xf9, 0x86, 0x1d, 0xf3, 0xaa, 0xde, 0xee, 0xf8, 0x3b, 0xf2, 0x59, 0xa7,
+-      0x57, 0x0a, 0xe9, 0xce, 0x8b, 0x22, 0xee, 0x3b, 0x42, 0xe4, 0x15, 0x3e,
+-      0xcb, 0x04, 0xee, 0x27, 0x1e, 0x7c, 0xe7, 0xa1, 0x2f, 0xe9, 0xf0, 0x73,
+-      0x38, 0xe1, 0xe7, 0x50, 0xeb, 0x44, 0x26, 0xed, 0xc7, 0x0e, 0x72, 0xee,
+-      0x17, 0xe2, 0x7f, 0xe7, 0xdc, 0x46, 0xc2, 0xb9, 0x6c, 0x8c, 0x4d, 0xb1,
+-      0xd2, 0x3d, 0xf7, 0x0e, 0xe6, 0x72, 0x5d, 0xf7, 0xa2, 0xc3, 0x62, 0x12,
+-      0xf3, 0x03, 0x9c, 0xe4, 0x75, 0x88, 0xff, 0x4a, 0x2f, 0x99, 0x57, 0x99,
+-      0x97, 0x29, 0x46, 0x5c, 0xe0, 0x31, 0xd5, 0xd1, 0x83, 0x3d, 0x70, 0xd7,
+-      0x59, 0xcd, 0xc4, 0xf8, 0x37, 0x83, 0x74, 0x4d, 0x81, 0xa6, 0x1b, 0x9e,
+-      0x7f, 0x87, 0xc7, 0x16, 0xcf, 0x4b, 0xca, 0xae, 0x58, 0xf4, 0xfa, 0x98,
+-      0xe7, 0xba, 0xc2, 0xf3, 0x77, 0x60, 0xf7, 0x5d, 0xe5, 0x50, 0x66, 0x94,
+-      0x39, 0xc9, 0x15, 0x2a, 0x0b, 0xdc, 0xe0, 0x0e, 0xd8, 0xd4, 0x97, 0xd0,
+-      0x1f, 0xb9, 0x12, 0xb1, 0xfd, 0x29, 0x6c, 0xe1, 0x7c, 0x0b, 0xbb, 0xc6,
+-      0xd7, 0x81, 0x83, 0x05, 0x7e, 0xdf, 0xc7, 0x18, 0xdf, 0x2d, 0x78, 0x7f,
+-      0x07, 0x67, 0xb0, 0x28, 0xb7, 0xaa, 0x71, 0xf7, 0x7b, 0x20, 0x77, 0x25,
+-      0xc1, 0x6b, 0x06, 0xdf, 0xe7, 0x63, 0xbc, 0x72, 0x1c, 0xd9, 0xe7, 0x5a,
+-      0x7f, 0x80, 0x38, 0x96, 0xe9, 0x2f, 0x31, 0x8f, 0xef, 0xfa, 0x31, 0x7e,
+-      0x61, 0x0f, 0x64, 0x5a, 0x9f, 0xca, 0x98, 0xe7, 0xe0, 0xc3, 0x65, 0x3f,
+-      0xc6, 0xd7, 0xf8, 0x4d, 0x1c, 0xbb, 0x83, 0xfd, 0x6e, 0x3d, 0xc3, 0xf6,
+-      0x49, 0x8a, 0x39, 0xe5, 0x2e, 0x72, 0x8f, 0xe9, 0x8f, 0x20, 0xdf, 0x62,
+-      0x5d, 0x2b, 0xe5, 0x7d, 0x16, 0x7c, 0x67, 0x5f, 0x33, 0xf7, 0x07, 0x92,
+-      0xe7, 0x2f, 0x22, 0xb6, 0x36, 0xfc, 0xd8, 0xe9, 0x05, 0xcc, 0x15, 0xb6,
+-      0xad, 0x97, 0xd4, 0xd5, 0xd4, 0xae, 0x4f, 0x63, 0x7b, 0x1e, 0xd6, 0x89,
+-      0xf9, 0xed, 0xc3, 0xe4, 0xec, 0x2e, 0xb9, 0xbf, 0x1f, 0x22, 0x87, 0xf9,
+-      0x6d, 0x96, 0xc9, 0xef, 0xf7, 0x20, 0xe5, 0x7d, 0x3c, 0x87, 0xc0, 0x3b,
+-      0xcb, 0x3e, 0x7a, 0xef, 0xec, 0xc6, 0x7e, 0x5a, 0xfb, 0x19, 0xdf, 0xbc,
+-      0xa7, 0xe7, 0x72, 0xef, 0xde, 0xc1, 0x76, 0x1e, 0x79, 0x2f, 0xf6, 0x03,
+-      0x72, 0xa6, 0x37, 0x3e, 0x47, 0x29, 0xfe, 0x1f, 0x60, 0x7c, 0x01, 0x76,
+-      0x55, 0x68, 0xa2, 0xc4, 0xe3, 0xc9, 0x03, 0x18, 0xe7, 0xfb, 0x3a, 0xd7,
+-      0xa6, 0x3c, 0xee, 0x61, 0x5c, 0xe7, 0xf9, 0x2e, 0xd6, 0xc9, 0x53, 0x95,
+-      0x35, 0x7e, 0xff, 0x2c, 0x79, 0xe7, 0xbc, 0xcc, 0x7d, 0xd4, 0x0d, 0x9c,
+-      0x9f, 0xeb, 0xd1, 0x18, 0xd5, 0x1d, 0xf8, 0xd5, 0x67, 0x1b, 0x2e, 0xd0,
+-      0x83, 0x1e, 0xec, 0xb0, 0xba, 0xb2, 0x6a, 0x76, 0x71, 0xe5, 0xb0, 0x7e,
+-      0x8c, 0xef, 0x27, 0x46, 0x79, 0xcd, 0x48, 0x7a, 0x78, 0xee, 0xbf, 0xf6,
+-      0xb4, 0x19, 0xf7, 0x62, 0x9c, 0x17, 0xb8, 0x07, 0x7b, 0x0d, 0xfb, 0xf6,
+-      0xc5, 0xef, 0xe1, 0x16, 0x8f, 0xec, 0x17, 0x8a, 0x79, 0xd1, 0xe1, 0x79,
+-      0x6a, 0x77, 0x84, 0x75, 0xf0, 0x8f, 0x88, 0x52, 0x9b, 0xa8, 0xfa, 0x16,
+-      0xd7, 0x54, 0x3b, 0xc9, 0xff, 0x17, 0x31, 0x3e, 0x9f, 0x60, 0x20, 0x3d,
+-      0x4b, 0xec, 0x57, 0xec, 0xaf, 0xf5, 0x2c, 0x30, 0xf5, 0xba, 0x9f, 0xda,
+-      0x0a, 0x6c, 0x7f, 0x23, 0xcd, 0x31, 0x88, 0x97, 0xda, 0xd3, 0x72, 0x34,
+-      0x84, 0x2d, 0xfc, 0xff, 0x82, 0x0a, 0x7a, 0x3b, 0xb6, 0x65, 0xc6, 0x78,
+-      0x79, 0xff, 0x7f, 0x04, 0x8f, 0xf6, 0x71, 0x1c, 0x3f, 0x8e, 0xef, 0x7e,
+-      0xfc, 0xac, 0x1c, 0x7c, 0xff, 0x51, 0xc3, 0xb3, 0x07, 0x04, 0xe7, 0x23,
+-      0xb2, 0xb2, 0x88, 0xc1, 0x5d, 0xc4, 0x28, 0x24, 0xaf, 0xf4, 0x41, 0xdc,
+-      0x9b, 0x13, 0x38, 0x37, 0x11, 0xe2, 0x19, 0x1c, 0xc0, 0xd9, 0x46, 0x3d,
+-      0xff, 0x3d, 0xe2, 0x38, 0x58, 0xb8, 0x6b, 0x74, 0x62, 0x37, 0x96, 0xc4,
+-      0x6e, 0xb4, 0xf5, 0xf0, 0x99, 0x5d, 0xf1, 0x52, 0xf2, 0xce, 0x67, 0xe2,
+-      0x5e, 0xc1, 0xe5, 0x1e, 0x09, 0x3e, 0x28, 0x19, 0x9d, 0x7b, 0x7b, 0x93,
+-      0xef, 0x97, 0x35, 0xce, 0xe5, 0xdc, 0xcf, 0x81, 0x6b, 0xa8, 0x96, 0x23,
+-      0xb8, 0x6b, 0x68, 0x5d, 0x2f, 0x31, 0x76, 0x27, 0xc6, 0xa7, 0x62, 0x0c,
+-      0x8b, 0x41, 0x41, 0x29, 0xb7, 0xba, 0x9f, 0x31, 0x96, 0xf8, 0x9e, 0xc6,
+-      0xef, 0x1d, 0x1d, 0x1b, 0xc0, 0x1d, 0x6e, 0x32, 0xb8, 0x1d, 0xb2, 0x7e,
+-      0xa3, 0xd3, 0x13, 0xdb, 0x11, 0xf3, 0x1e, 0xb8, 0x7b, 0x1f, 0x76, 0x85,
+-      0xe0, 0x6d, 0xe7, 0x6e, 0x37, 0x87, 0x9c, 0x72, 0x1b, 0xb1, 0xbd, 0xab,
+-      0x3a, 0x75, 0x71, 0x83, 0xfb, 0xae, 0x16, 0xf2, 0x4d, 0x1e, 0xbd, 0xb2,
+-      0x4a, 0xef, 0xa2, 0x16, 0x5d, 0xc3, 0x9a, 0xeb, 0x98, 0xbb, 0xd2, 0x4a,
+-      0x71, 0x84, 0x1e, 0x0f, 0xd8, 0x9c, 0x57, 0xff, 0xd4, 0x55, 0xa7, 0x7b,
+-      0x2d, 0xff, 0xfd, 0x07, 0x5d, 0xe7, 0x92, 0xbb, 0xa8, 0x13, 0x00, 0x00,
+-      0x00 };
++      0xbd, 0x58, 0x5d, 0x6c, 0x1c, 0x57, 0x15, 0x3e, 0x73, 0xe7, 0xee, 0x7a,
++      0x6d, 0x39, 0xf1, 0xb8, 0x99, 0x96, 0x4d, 0x63, 0xd4, 0x99, 0x78, 0xfc,
++      0x43, 0x6d, 0x95, 0x69, 0x59, 0x15, 0x17, 0x56, 0x68, 0xba, 0xbb, 0x71,
++      0xad, 0xaa, 0xaa, 0x5c, 0x29, 0x88, 0x4a, 0x8d, 0x90, 0x59, 0x37, 0x6d,
++      0x79, 0x4b, 0x11, 0x0f, 0x48, 0x45, 0xca, 0xb2, 0x76, 0xd2, 0x08, 0x2d,
++      0x99, 0xd6, 0x85, 0x44, 0x42, 0x7d, 0x88, 0x9c, 0x3a, 0xee, 0xc3, 0xca,
++      0x9b, 0x8a, 0x07, 0x24, 0xa4, 0xa8, 0x55, 0x80, 0xc0, 0x1b, 0x7d, 0xa8,
++      0xf8, 0x79, 0x22, 0x12, 0x0f, 0x54, 0x08, 0x90, 0x85, 0x04, 0x2a, 0xa5,
++      0xe4, 0xf2, 0x7d, 0x77, 0x67, 0x92, 0xc5, 0x4d, 0x41, 0xe5, 0x81, 0x95,
++      0x56, 0x77, 0xe6, 0xde, 0x73, 0xce, 0x3d, 0xf7, 0xfc, 0x7c, 0xe7, 0xdc,
++      0x39, 0xec, 0xc8, 0x88, 0x64, 0xbf, 0x7d, 0xf8, 0x57, 0xbe, 0x72, 0xe2,
++      0xeb, 0x0f, 0xdc, 0x57, 0xb9, 0x0f, 0x8f, 0x0f, 0x3a, 0x77, 0x6b, 0x2d,
++      0xff, 0xc7, 0x9f, 0x2b, 0xe2, 0xe5, 0x7a, 0xf0, 0x2f, 0x25, 0x55, 0x4d,
++      0x0e, 0xd6, 0x22, 0x29, 0xb9, 0xd5, 0xea, 0xfc, 0x6a, 0x24, 0x92, 0x74,
++      0xe7, 0x82, 0xba, 0xfc, 0xd3, 0xb4, 0x7c, 0x2d, 0x9c, 0xff, 0x64, 0xf5,
++      0x83, 0x4f, 0x5f, 0xf9, 0x6c, 0xb8, 0x7b, 0xc1, 0x95, 0x92, 0x57, 0x3d,
++      0xa3, 0xbd, 0x69, 0x29, 0x4d, 0x80, 0xe7, 0xd5, 0x99, 0x6f, 0x17, 0x64,
++      0x7f, 0x2e, 0xab, 0x65, 0x54, 0x74, 0xdd, 0x5c, 0x99, 0x89, 0xbc, 0x36,
++      0x36, 0xb8, 0xdc, 0x0b, 0xa4, 0xd6, 0x2b, 0xcb, 0x9b, 0x3d, 0x5f, 0xde,
++      0xe8, 0x69, 0x39, 0xfe, 0xca, 0x49, 0x59, 0x8f, 0xc3, 0x72, 0xc3, 0x2d,
++      0x89, 0xaa, 0x86, 0xe5, 0xa6, 0x04, 0xb2, 0x15, 0x87, 0xad, 0x15, 0x77,
++      0xdc, 0x29, 0x55, 0x4b, 0xf2, 0xc2, 0x8c, 0x92, 0x0b, 0xfe, 0x31, 0x79,
++      0x26, 0x7a, 0x12, 0x7f, 0x2d, 0x6a, 0x43, 0x3b, 0xf5, 0xf3, 0x5a, 0xf4,
++      0xc6, 0x98, 0x3c, 0x12, 0x1b, 0xb3, 0x1a, 0x27, 0xe0, 0x9f, 0x9c, 0x7d,
++      0x56, 0x86, 0xa5, 0xe5, 0x85, 0x4b, 0x22, 0x05, 0xd2, 0x48, 0x2d, 0x2e,
++      0x48, 0xe2, 0xf5, 0xcf, 0x75, 0xc1, 0x8e, 0x1f, 0x98, 0x2d, 0xf0, 0x0f,
++      0x47, 0xf9, 0xfa, 0x1d, 0xd9, 0xba, 0x97, 0xad, 0x2b, 0x51, 0xe7, 0xc2,
++      0x60, 0x5b, 0xa6, 0x12, 0xed, 0xdc, 0x30, 0xb5, 0xe8, 0x2e, 0xaf, 0xb6,
++      0xad, 0xc5, 0xdd, 0xa0, 0xfe, 0x91, 0x57, 0x17, 0x03, 0x1e, 0x97, 0x3c,
++      0x5a, 0x55, 0xbf, 0x06, 0xbf, 0x4d, 0x25, 0xca, 0x11, 0xb9, 0xda, 0x29,
++      0x7b, 0xb5, 0xde, 0x37, 0x9c, 0x5a, 0x7a, 0xc3, 0x24, 0x7a, 0x44, 0x54,
++      0x94, 0x38, 0xb5, 0x6d, 0xca, 0x1a, 0x16, 0x1d, 0x0d, 0x81, 0x67, 0xd2,
++      0x53, 0xc2, 0xb1, 0x96, 0xcd, 0x53, 0x76, 0x03, 0xcf, 0x8b, 0x4e, 0xb2,
++      0xad, 0x9d, 0xda, 0xf9, 0x25, 0x3c, 0x97, 0xc0, 0x0f, 0xbb, 0xc4, 0x8e,
++      0x24, 0xcb, 0x0e, 0xf8, 0x78, 0x4e, 0x0f, 0xef, 0x4a, 0x12, 0xdf, 0x93,
++      0xb5, 0x4a, 0x58, 0x6e, 0xc9, 0xa3, 0x4e, 0x7d, 0xfb, 0x43, 0x4e, 0xf3,
++      0x96, 0x7a, 0x1f, 0x9e, 0xa3, 0x2e, 0x0f, 0x6b, 0x63, 0xd4, 0xfd, 0x43,
++      0xd9, 0x19, 0x29, 0x2f, 0xe9, 0xeb, 0xef, 0xf3, 0x1d, 0x3a, 0xa7, 0xd0,
++      0xbd, 0x5b, 0x84, 0x3e, 0xc6, 0x70, 0x9f, 0x5a, 0x54, 0x87, 0x9e, 0x09,
++      0xfe, 0xe1, 0x99, 0x26, 0x42, 0xe1, 0xf0, 0xb9, 0x7d, 0x12, 0x8c, 0x1b,
++      0xd3, 0x88, 0x43, 0x6f, 0x5b, 0x26, 0x64, 0x2d, 0x9d, 0xf0, 0x8e, 0xa4,
++      0x6d, 0xac, 0xb7, 0x48, 0x03, 0x7b, 0x88, 0x1c, 0xe9, 0x1a, 0x73, 0x29,
++      0x3e, 0x50, 0x94, 0xfd, 0x6a, 0xbe, 0x20, 0x61, 0x90, 0x60, 0xee, 0xf0,
++      0xa5, 0xbd, 0x36, 0xbb, 0x27, 0xd3, 0x81, 0x76, 0xc7, 0x3e, 0xf1, 0xa1,
++      0xec, 0x7d, 0xd4, 0xab, 0x9d, 0xcf, 0xed, 0x6c, 0xf5, 0x86, 0x5d, 0x63,
++      0xa9, 0x55, 0xa0, 0xff, 0x47, 0x9e, 0x29, 0xe7, 0xa3, 0x2e, 0xd4, 0x1b,
++      0xf4, 0xd1, 0x2d, 0x9d, 0x9e, 0xfa, 0x90, 0x4e, 0xd4, 0x47, 0x89, 0x3e,
++      0x57, 0x92, 0xf5, 0xe8, 0x71, 0x25, 0xfb, 0x8d, 0x59, 0x8f, 0xb5, 0xd3,
++      0x38, 0x7f, 0x2c, 0x7b, 0x46, 0x1c, 0xa6, 0x88, 0xc3, 0x14, 0x71, 0x99,
++      0x8a, 0xa7, 0xaa, 0x81, 0x5c, 0x99, 0x29, 0xc9, 0x75, 0x17, 0xfe, 0xec,
++      0xcd, 0x79, 0xaf, 0x21, 0xa6, 0x12, 0xcf, 0x11, 0x37, 0x4a, 0x66, 0x0b,
++      0xc2, 0x77, 0xc4, 0x92, 0x4e, 0xca, 0x2e, 0x62, 0x29, 0x39, 0xca, 0xb9,
++      0x21, 0x59, 0xb1, 0x67, 0x99, 0xf3, 0x4e, 0x09, 0x7d, 0x55, 0xc3, 0xda,
++      0x64, 0x70, 0x4a, 0x76, 0x11, 0x1f, 0x35, 0xac, 0x53, 0x56, 0xe8, 0xb5,
++      0x40, 0xd1, 0x4e, 0xdf, 0x45, 0x0e, 0xf8, 0x88, 0xfb, 0x99, 0xb2, 0x12,
++      0x47, 0x56, 0xe7, 0x61, 0x8b, 0xf9, 0x29, 0xd8, 0x88, 0x39, 0xc1, 0xb8,
++      0xfa, 0xeb, 0xb4, 0x8e, 0x4e, 0x22, 0x7e, 0x40, 0x8b, 0xf3, 0x9f, 0x4a,
++      0x67, 0xc0, 0x1f, 0x15, 0xa9, 0xe7, 0x56, 0xac, 0x65, 0x3d, 0xbd, 0xa2,
++      0x0a, 0xd1, 0xef, 0x1d, 0xd9, 0x1f, 0xb6, 0x12, 0x09, 0x5b, 0x4a, 0x29,
++      0x9f, 0x5b, 0xbf, 0x84, 0x3c, 0x7a, 0xd3, 0xea, 0xaf, 0xc1, 0x57, 0xce,
++      0xf4, 0xa7, 0xdd, 0x45, 0x36, 0x3b, 0x61, 0xbc, 0x08, 0xdd, 0xae, 0xc2,
++      0xff, 0xb4, 0xf9, 0xa5, 0x2e, 0x64, 0x77, 0x1c, 0xe6, 0xae, 0xb4, 0xbb,
++      0xa4, 0xb3, 0x69, 0xbe, 0xa2, 0xab, 0xb2, 0xdc, 0xee, 0x9c, 0x34, 0x6e,
++      0x24, 0x2b, 0x85, 0x2a, 0xfd, 0x36, 0xba, 0x00, 0x3f, 0x2c, 0xb7, 0xbb,
++      0x13, 0x8f, 0x6d, 0x76, 0xa4, 0x75, 0x77, 0x55, 0x5a, 0x6e, 0x45, 0xdd,
++      0xa5, 0x64, 0x0c, 0x72, 0xab, 0xd8, 0x87, 0x71, 0x15, 0x06, 0x75, 0x77,
++      0xe2, 0xb1, 0x8b, 0x9d, 0x7b, 0x90, 0xb7, 0xf2, 0x41, 0xad, 0x12, 0x21,
++      0x77, 0xaf, 0x1e, 0x74, 0x25, 0x92, 0xb5, 0x5e, 0x49, 0x6a, 0xe9, 0x84,
++      0xac, 0xf7, 0x24, 0x79, 0x6a, 0x06, 0xfb, 0x55, 0xf0, 0xde, 0x9b, 0x97,
++      0x56, 0x6f, 0x62, 0x45, 0x55, 0x5b, 0x92, 0xf4, 0xd6, 0xf1, 0x2f, 0x49,
++      0xa3, 0x53, 0x2a, 0x5d, 0xec, 0xb4, 0xc8, 0x5f, 0x72, 0xaa, 0x81, 0x3e,
++      0xdc, 0xdd, 0x65, 0xdc, 0x40, 0xce, 0xf0, 0x97, 0x54, 0x55, 0x4b, 0xd3,
++      0xf7, 0x21, 0xc3, 0x81, 0x4d, 0xa8, 0xeb, 0x2c, 0xf6, 0xed, 0x8f, 0xad,
++      0x1e, 0x7d, 0x37, 0x24, 0xed, 0x78, 0x1e, 0x76, 0x62, 0xd4, 0x0e, 0xc9,
++      0x5a, 0xf4, 0x9e, 0x79, 0x1a, 0xb1, 0xfa, 0x9a, 0x98, 0x7b, 0x6a, 0xc0,
++      0x93, 0x1a, 0x4c, 0xfa, 0x42, 0x54, 0x96, 0x53, 0xd8, 0xb7, 0xcf, 0xb7,
++      0x0e, 0x1d, 0xc8, 0x37, 0x06, 0xbe, 0x06, 0xf8, 0x7c, 0x39, 0x6d, 0x79,
++      0xc7, 0xc0, 0xbb, 0x9b, 0xf1, 0xce, 0x95, 0x17, 0x25, 0x06, 0xcf, 0x64,
++      0xb0, 0x08, 0x7f, 0xae, 0xf8, 0x0d, 0xf0, 0x36, 0xa0, 0x03, 0xc6, 0x54,
++      0x5a, 0xba, 0x42, 0xb9, 0x61, 0xf9, 0x69, 0xe6, 0x83, 0x95, 0xd9, 0x82,
++      0x4c, 0xe8, 0x95, 0x96, 0x20, 0x67, 0x01, 0xe3, 0x3b, 0xa6, 0x9d, 0x02,
++      0x77, 0x7c, 0x3e, 0xbf, 0x69, 0x54, 0x15, 0x31, 0x5a, 0x89, 0x82, 0xb6,
++      0xf0, 0xbd, 0x28, 0x75, 0xe4, 0x99, 0x8a, 0xc6, 0xa4, 0xe9, 0x39, 0x8e,
++      0xaa, 0xba, 0xd2, 0x44, 0x84, 0x26, 0xcb, 0xda, 0xce, 0xad, 0x20, 0xce,
++      0x54, 0xf5, 0x7b, 0xaa, 0x5f, 0x0f, 0x0a, 0xa0, 0x41, 0x6e, 0x46, 0xa3,
++      0xb0, 0xc1, 0x38, 0x68, 0xcf, 0x62, 0x7e, 0x0a, 0xf8, 0x39, 0x0e, 0x1a,
++      0x8e, 0xcc, 0x11, 0xda, 0x85, 0xf4, 0x15, 0xe8, 0x98, 0xcf, 0x55, 0x60,
++      0x9b, 0xc1, 0xb4, 0xc9, 0x7d, 0x0c, 0x9a, 0x54, 0x67, 0x79, 0x37, 0x98,
++      0x4b, 0xf9, 0x7a, 0x80, 0xf5, 0xab, 0x9f, 0x52, 0xb2, 0x6b, 0x2e, 0x46,
++      0x8c, 0x61, 0x79, 0xaf, 0x11, 0x25, 0xe3, 0xae, 0xcd, 0xf3, 0x3c, 0xdf,
++      0x39, 0xb2, 0x16, 0x9c, 0x39, 0xb8, 0x1a, 0x39, 0xee, 0xfa, 0xfc, 0x01,
++      0x69, 0xf9, 0x61, 0x5c, 0x87, 0xbf, 0xd7, 0x53, 0xe6, 0xc6, 0x18, 0xce,
++      0x1d, 0x22, 0xea, 0x26, 0xf1, 0x9c, 0x1c, 0x04, 0x0f, 0xfc, 0xd8, 0x82,
++      0x2c, 0x8e, 0x88, 0x99, 0x34, 0x84, 0x8e, 0xb0, 0x47, 0x34, 0xe7, 0x1d,
++      0x61, 0x3c, 0xfa, 0x5c, 0x63, 0x8d, 0x79, 0xf5, 0x50, 0x2d, 0x0a, 0xe3,
++      0x66, 0x96, 0x2b, 0x6f, 0xc1, 0xb6, 0xed, 0x94, 0xf5, 0x22, 0xaf, 0x11,
++      0xcc, 0x0f, 0xc6, 0x4a, 0x8e, 0xb1, 0xe0, 0x89, 0x98, 0x9f, 0xa5, 0x0c,
++      0x6b, 0x6b, 0x19, 0x8e, 0x2e, 0x40, 0x0f, 0x63, 0x9e, 0x00, 0x86, 0xb6,
++      0x63, 0x1b, 0x9f, 0xad, 0x40, 0xdd, 0x30, 0x93, 0xd3, 0xb4, 0xb9, 0x31,
++      0x27, 0xe2, 0x45, 0xd0, 0xfe, 0x16, 0xf6, 0x5a, 0x02, 0x8e, 0x12, 0x7b,
++      0xb9, 0x77, 0x55, 0xd7, 0x3a, 0xfb, 0xa0, 0x4b, 0x00, 0x7c, 0x83, 0x0d,
++      0x2c, 0xde, 0x0e, 0x23, 0xdf, 0x99, 0xf3, 0x61, 0xb0, 0x22, 0x9c, 0x97,
++      0x61, 0x85, 0xf7, 0x26, 0xfc, 0xb4, 0x5e, 0x79, 0xd4, 0x69, 0x6c, 0xbf,
++      0x9f, 0xf9, 0x48, 0xc6, 0x14, 0x6a, 0x49, 0xd3, 0x27, 0x5f, 0x11, 0x7c,
++      0xfb, 0xc0, 0xf3, 0x77, 0xac, 0x15, 0x30, 0x0e, 0xca, 0xb1, 0xb8, 0x8d,
++      0xbd, 0x02, 0xec, 0xb5, 0x24, 0xba, 0xfa, 0x3c, 0xb0, 0x67, 0x2a, 0x68,
++      0xc8, 0xf7, 0x55, 0xbf, 0x46, 0xd2, 0x37, 0x5f, 0x18, 0xf0, 0x4d, 0x20,
++      0xae, 0xcd, 0xc1, 0x87, 0xb2, 0x98, 0x22, 0x66, 0x3e, 0x98, 0xad, 0xfb,
++      0xc0, 0xbe, 0xcf, 0x64, 0x18, 0x5e, 0x22, 0x0e, 0xca, 0x19, 0x8b, 0x83,
++      0x45, 0xe2, 0x20, 0x70, 0xa5, 0xb5, 0x00, 0x7b, 0xc7, 0xef, 0x02, 0x5f,
++      0xea, 0xf0, 0xc4, 0x4f, 0x3a, 0x1a, 0x71, 0xe5, 0x82, 0x9f, 0x75, 0xf8,
++      0xf3, 0xae, 0x8c, 0x84, 0xde, 0xbb, 0xc0, 0x9b, 0xe4, 0x28, 0xf3, 0xc0,
++      0x18, 0xe4, 0x3a, 0xb0, 0x6a, 0xba, 0x7c, 0x0a, 0x71, 0xef, 0x02, 0x27,
++      0xb4, 0x70, 0xdf, 0xbc, 0x6e, 0xe6, 0xf5, 0x9b, 0xbf, 0xb7, 0x1d, 0xb8,
++      0x19, 0xb5, 0xee, 0x73, 0x90, 0x31, 0x15, 0x1c, 0x81, 0x1f, 0xd7, 0x16,
++      0xfe, 0x1b, 0xcf, 0x6f, 0x32, 0x1e, 0xd4, 0x90, 0x0a, 0xf7, 0x15, 0x69,
++      0x74, 0x69, 0x87, 0x18, 0x76, 0xb0, 0x18, 0x84, 0x9c, 0x8f, 0x91, 0xf3,
++      0x22, 0x4d, 0x62, 0x05, 0x30, 0x8c, 0xb8, 0xb7, 0x06, 0x7a, 0x55, 0x19,
++      0x82, 0x5d, 0x11, 0x4b, 0x4a, 0x4a, 0xba, 0x7a, 0x54, 0xaf, 0x83, 0xb6,
++      0x50, 0x5d, 0xd6, 0x5b, 0xd1, 0x31, 0x37, 0xef, 0x97, 0xda, 0x1d, 0x71,
++      0x6a, 0x7d, 0x3f, 0x67, 0x74, 0x8f, 0x65, 0x74, 0x4b, 0x83, 0x74, 0x98,
++      0x6f, 0x64, 0xf3, 0x09, 0xe6, 0x3f, 0x91, 0xd9, 0x9c, 0xb5, 0xa0, 0x84,
++      0x3a, 0xcb, 0x3a, 0x10, 0x06, 0x81, 0xfa, 0x4f, 0x75, 0x60, 0x61, 0x00,
++      0xbb, 0x45, 0xd9, 0xbe, 0xc2, 0x67, 0x4c, 0x0e, 0x9e, 0x75, 0x58, 0x49,
++      0x74, 0x33, 0x3e, 0xf1, 0xdb, 0xcc, 0xf6, 0x21, 0x2d, 0xf1, 0x7a, 0x90,
++      0x16, 0x69, 0x04, 0xbb, 0xa8, 0xb3, 0xb7, 0xb3, 0xd9, 0x01, 0xac, 0x21,
++      0xe7, 0x53, 0x57, 0x1e, 0xd6, 0xcc, 0xef, 0x7b, 0xb5, 0x3d, 0xc7, 0x0e,
++      0xe8, 0x77, 0x26, 0x2c, 0xce, 0x2c, 0x75, 0x86, 0x20, 0x7e, 0x54, 0x8e,
++      0x23, 0x9f, 0x9f, 0x86, 0xef, 0x2f, 0xc6, 0x0a, 0xdd, 0x02, 0x6b, 0x8e,
++      0x41, 0x1c, 0x86, 0xd6, 0x17, 0xb5, 0x68, 0x0d, 0x91, 0xfc, 0x2d, 0xb9,
++      0x3a, 0x3f, 0x22, 0x85, 0x4b, 0xd4, 0x01, 0xfd, 0xd2, 0xe6, 0xe0, 0x3e,
++      0x73, 0xd8, 0x67, 0x02, 0x18, 0x78, 0x3f, 0xea, 0x8b, 0x2f, 0x7a, 0x1a,
++      0x58, 0x9b, 0x96, 0x9c, 0x3a, 0xe4, 0xab, 0x4b, 0x3c, 0x3f, 0x31, 0xb8,
++      0x94, 0xd5, 0x36, 0xe6, 0xd6, 0x10, 0x6a, 0xfa, 0x1f, 0x91, 0xbb, 0x4a,
++      0x56, 0x2b, 0xc6, 0x1c, 0x89, 0x7f, 0x00, 0xfb, 0x62, 0x6e, 0x93, 0x6b,
++      0xbb, 0x98, 0xe7, 0x1c, 0x65, 0x30, 0x16, 0x0f, 0xa0, 0xae, 0x61, 0xcf,
++      0xa3, 0xe4, 0x19, 0x42, 0xcd, 0x27, 0xfe, 0x63, 0xdc, 0xe4, 0x3b, 0xcf,
++      0x44, 0x6c, 0x73, 0x31, 0x8e, 0x60, 0xe4, 0x99, 0x7e, 0x91, 0xf9, 0x8a,
++      0xcf, 0xc6, 0xe8, 0xea, 0xa8, 0xd4, 0x3b, 0x11, 0x30, 0x76, 0xaa, 0x7c,
++      0x5c, 0xb8, 0x86, 0xf7, 0x2e, 0xe7, 0xbd, 0x81, 0x79, 0x3c, 0x77, 0xad,
++      0xce, 0xa8, 0xed, 0x79, 0xff, 0xb2, 0x06, 0xc3, 0xa2, 0xc7, 0xd8, 0x64,
++      0xaf, 0xc2, 0xfa, 0x67, 0x71, 0x6b, 0x96, 0x7d, 0xca, 0xeb, 0x1d, 0xd6,
++      0x42, 0xcd, 0xbc, 0x44, 0x00, 0x1c, 0x92, 0xba, 0x9f, 0x9f, 0x0b, 0x71,
++      0x1c, 0x53, 0x36, 0x65, 0x4c, 0xc2, 0x76, 0xec, 0x47, 0xa2, 0xb2, 0x76,
++      0xa6, 0x92, 0x26, 0xf9, 0xba, 0x05, 0x29, 0x6c, 0xcc, 0x8b, 0x7b, 0xd6,
++      0xc8, 0x66, 0x5f, 0x9e, 0xb7, 0x2c, 0xbe, 0xd4, 0x5e, 0xa2, 0x1e, 0x98,
++      0xdf, 0x61, 0x3d, 0x0c, 0x81, 0x67, 0xc5, 0x6c, 0xdf, 0xb2, 0x34, 0x3b,
++      0x91, 0xd7, 0x10, 0x8c, 0xdd, 0x3b, 0xe0, 0xbb, 0x22, 0xce, 0xac, 0xe5,
++      0x62, 0xa7, 0xbf, 0x17, 0x73, 0xee, 0xb9, 0xb8, 0xbf, 0x57, 0x43, 0x7e,
++      0x89, 0xbd, 0xc4, 0x57, 0xc2, 0x3e, 0x12, 0x7d, 0xe3, 0x39, 0x8d, 0xfd,
++      0x68, 0xa3, 0x02, 0x7a, 0xdb, 0xd9, 0xec, 0x3c, 0x21, 0xe8, 0x34, 0x6c,
++      0x4e, 0x5b, 0x73, 0x0f, 0xc6, 0xe2, 0x3f, 0x0c, 0xf1, 0x05, 0x75, 0x05,
++      0xfa, 0xe2, 0xbd, 0xc7, 0x3d, 0x26, 0xe4, 0xc5, 0xd4, 0x62, 0xad, 0x77,
++      0x02, 0x98, 0xd5, 0xe8, 0xfc, 0x2d, 0xaf, 0x3d, 0x49, 0x1b, 0xf8, 0xfb,
++      0xac, 0x8c, 0x8a, 0xde, 0x19, 0x95, 0xe7, 0xd0, 0xef, 0x15, 0x36, 0x50,
++      0xe7, 0x61, 0x63, 0x75, 0xb6, 0x35, 0xcb, 0x9e, 0xed, 0x32, 0x72, 0x79,
++      0xb5, 0x12, 0xc5, 0xae, 0x33, 0x2d, 0x67, 0xbe, 0x1b, 0xce, 0x6e, 0xdb,
++      0x7c, 0xc6, 0xfa, 0x4e, 0x20, 0xa7, 0xbb, 0x91, 0x9c, 0xe9, 0x7a, 0xd0,
++      0xcb, 0xbb, 0xd5, 0xd7, 0x46, 0xc4, 0xdb, 0x06, 0xfe, 0xc4, 0x53, 0x9e,
++      0x0b, 0x3e, 0xa8, 0xd2, 0x6e, 0xec, 0x63, 0xe9, 0x5f, 0xe2, 0xdb, 0xa3,
++      0x78, 0x1e, 0x11, 0xf7, 0x1c, 0xfb, 0x4e, 0xc6, 0x24, 0xfd, 0x33, 0xd8,
++      0x0b, 0x13, 0xfb, 0x20, 0x73, 0x87, 0xb9, 0x9f, 0xe7, 0x66, 0x9e, 0xab,
++      0xc4, 0x01, 0xed, 0x2c, 0xc2, 0x5e, 0xd7, 0x62, 0xe6, 0xeb, 0x0d, 0x73,
++      0xcd, 0xf6, 0x6e, 0x1e, 0xfb, 0xe2, 0x81, 0xde, 0x2d, 0xef, 0x7b, 0x18,
++      0xaf, 0xe5, 0x81, 0x7c, 0xbd, 0x6e, 0x73, 0xf5, 0x0d, 0xe4, 0xed, 0xcb,
++      0x69, 0xd9, 0xe6, 0xec, 0xe1, 0x07, 0x6e, 0x97, 0xb3, 0x97, 0x3f, 0x46,
++      0xce, 0xfe, 0x30, 0xcb, 0xd9, 0xa2, 0x8d, 0x6b, 0xb5, 0x31, 0xb8, 0xf6,
++      0x23, 0xac, 0x0d, 0x65, 0x77, 0x0a, 0x6d, 0x3b, 0xe8, 0xc3, 0x0f, 0xd2,
++      0x47, 0xb9, 0x7f, 0xfa, 0x71, 0x5a, 0xd7, 0xa4, 0x81, 0x0f, 0x37, 0x46,
++      0x11, 0x4f, 0xcc, 0xe9, 0x3c, 0x9e, 0x02, 0xc4, 0x72, 0xce, 0x8f, 0x7e,
++      0xf3, 0x28, 0x63, 0xa1, 0x60, 0xf3, 0xc6, 0xad, 0xe6, 0x34, 0x65, 0x59,
++      0x44, 0x2f, 0xf7, 0x63, 0x8e, 0xdd, 0x7e, 0xac, 0x14, 0x37, 0x4a, 0xf2,
++      0xfc, 0x0c, 0xb1, 0x2b, 0x8c, 0xaf, 0x42, 0xe7, 0x6b, 0x91, 0x2f, 0x85,
++      0x69, 0xe6, 0x33, 0xab, 0x51, 0x11, 0x31, 0x84, 0xbb, 0x55, 0x6a, 0x4e,
++      0xa2, 0xdf, 0x0a, 0x34, 0xfc, 0xfc, 0x32, 0xe2, 0x88, 0xd8, 0x8a, 0x98,
++      0x98, 0xdd, 0x44, 0x4c, 0x1c, 0xe7, 0xbb, 0xdd, 0xb7, 0x60, 0x69, 0x5d,
++      0xbb, 0xbf, 0x0f, 0xfd, 0x4b, 0x32, 0x74, 0xce, 0xe0, 0x4e, 0x75, 0x8b,
++      0xef, 0xb4, 0x8d, 0x5f, 0x60, 0x09, 0xe6, 0x57, 0x6d, 0xfc, 0xd2, 0xa7,
++      0x8c, 0x7b, 0x63, 0x7e, 0x67, 0xf3, 0xe6, 0xd7, 0x16, 0x03, 0xae, 0xc5,
++      0x36, 0x9e, 0x63, 0xf6, 0x9b, 0xa7, 0xbb, 0x3f, 0xd7, 0x16, 0x23, 0x36,
++      0x8c, 0x9c, 0x8a, 0x6d, 0xac, 0xcd, 0xbe, 0x81, 0x63, 0xbf, 0xd6, 0xcf,
++      0x85, 0x01, 0x39, 0x93, 0xde, 0x23, 0x90, 0x83, 0x9a, 0x17, 0xac, 0xb1,
++      0x3f, 0x88, 0xa7, 0xd0, 0x2f, 0x81, 0xae, 0xbb, 0x17, 0x2f, 0xc6, 0x31,
++      0xd2, 0xde, 0x7f, 0x80, 0x5c, 0x0f, 0x36, 0xa4, 0x1c, 0xea, 0x4d, 0xbd,
++      0x46, 0x25, 0x3a, 0x9b, 0xeb, 0xf4, 0x17, 0xab, 0xcb, 0xbf, 0xcb, 0xc3,
++      0xfa, 0xce, 0xed, 0xf8, 0xbc, 0x01, 0xbe, 0x3f, 0xdf, 0x86, 0x0f, 0xeb,
++      0x3b, 0xe4, 0x19, 0xb9, 0xd9, 0x6b, 0xd4, 0x6f, 0xc6, 0x75, 0x82, 0xb8,
++      0x27, 0xef, 0xde, 0xbb, 0xdc, 0x60, 0x0e, 0xe4, 0x35, 0x9e, 0x71, 0xce,
++      0x3d, 0xf3, 0x58, 0xcf, 0x63, 0x3c, 0x8f, 0xf9, 0x3c, 0xd6, 0xc3, 0xf8,
++      0x19, 0xe9, 0xfb, 0x57, 0x6f, 0x84, 0xd8, 0x7f, 0xe4, 0x7f, 0xb8, 0xb7,
++      0x10, 0x23, 0x24, 0xb9, 0x75, 0xd7, 0xfb, 0x69, 0xd6, 0xaf, 0x94, 0x98,
++      0x6b, 0xf8, 0xb3, 0x8f, 0xdf, 0x45, 0x7f, 0x10, 0x67, 0xb6, 0x4d, 0xb2,
++      0xb1, 0x4f, 0xd3, 0xef, 0x07, 0xbf, 0x9a, 0x61, 0xf2, 0x17, 0xfb, 0xf5,
++      0x47, 0xf2, 0x9c, 0x62, 0x0e, 0xd9, 0x9c, 0xe2, 0x79, 0x70, 0x0f, 0x37,
++      0x66, 0x19, 0x7e, 0x7c, 0x3e, 0xce, 0xf3, 0x08, 0xf1, 0xf4, 0x40, 0x9e,
++      0xe3, 0xb0, 0x53, 0x74, 0xc3, 0xe8, 0xe9, 0x04, 0x36, 0xe3, 0xdd, 0xb7,
++      0x81, 0xde, 0x89, 0x76, 0x5a, 0x72, 0x9e, 0xb8, 0x79, 0xdf, 0xdd, 0xdb,
++      0x27, 0xd1, 0x6e, 0xb4, 0xeb, 0xa0, 0xdd, 0xc2, 0x78, 0x5c, 0x11, 0x03,
++      0x6e, 0x87, 0x13, 0x79, 0x3d, 0x07, 0x06, 0x4d, 0xe7, 0x76, 0xfa, 0xd8,
++      0x35, 0x3d, 0xe9, 0x7f, 0x2b, 0xd8, 0x8b, 0x0f, 0xdb, 0xee, 0x00, 0x3e,
++      0xdc, 0xa6, 0xe7, 0xa4, 0x0c, 0xda, 0x00, 0xf5, 0xcd, 0xf6, 0x21, 0xec,
++      0x31, 0x6f, 0x18, 0xd7, 0xf6, 0x9b, 0xc4, 0x46, 0xf6, 0x99, 0xdf, 0x2c,
++      0xc8, 0xc8, 0x3e, 0xfb, 0x9e, 0x6c, 0x73, 0x64, 0x4c, 0x48, 0xbf, 0x6e,
++      0x59, 0xfd, 0x1f, 0xcf, 0xf4, 0xef, 0xeb, 0x2c, 0xea, 0xa3, 0x30, 0x8d,
++      0xba, 0x7a, 0xd0, 0x35, 0xcc, 0xed, 0xd2, 0x52, 0xd5, 0x13, 0xd2, 0xa8,
++      0xb0, 0x5f, 0x12, 0xdc, 0xb5, 0xa0, 0xc3, 0x02, 0xf5, 0x28, 0x43, 0x8f,
++      0x51, 0xdc, 0x4d, 0xc2, 0xa5, 0x96, 0x84, 0xc9, 0x0a, 0x08, 0x67, 0xbe,
++      0x43, 0xbb, 0x1d, 0xd3, 0x5b, 0x1d, 0xda, 0xed, 0x49, 0xbd, 0xde, 0x99,
++      0x44, 0x7f, 0x18, 0xc2, 0xdb, 0xe1, 0xec, 0x25, 0x61, 0x8c, 0xcd, 0xc5,
++      0x1c, 0x4f, 0x0b, 0xfb, 0xb1, 0x63, 0x7a, 0xaa, 0xcb, 0xf1, 0x49, 0x1d,
++      0x75, 0x07, 0xe5, 0xfe, 0xc9, 0x00, 0x13, 0x93, 0xeb, 0xc8, 0xa3, 0x17,
++      0x7b, 0xfd, 0xbd, 0x71, 0x3f, 0xcc, 0xe4, 0x62, 0x2e, 0xcd, 0x65, 0x0b,
++      0x71, 0x8a, 0xb2, 0x21, 0x77, 0x32, 0xfe, 0x99, 0xdd, 0x83, 0xf7, 0xa3,
++      0x8f, 0xda, 0xe3, 0xae, 0xfc, 0xfb, 0x04, 0x72, 0xa7, 0x60, 0xb1, 0x67,
++      0x2d, 0xc5, 0x9d, 0xda, 0x37, 0xa6, 0x19, 0xbd, 0x0d, 0xdb, 0xa1, 0x47,
++      0x98, 0xf7, 0xf0, 0x07, 0xae, 0x2e, 0x73, 0x0d, 0x7d, 0x38, 0xee, 0x82,
++      0xbc, 0xcf, 0xad, 0xa5, 0x5c, 0x63, 0x8c, 0xa3, 0x57, 0x9c, 0xff, 0x15,
++      0x68, 0xdf, 0x31, 0xad, 0x9e, 0xb2, 0xf7, 0x75, 0x15, 0xe1, 0x1e, 0xd6,
++      0x63, 0x3f, 0x23, 0x4e, 0x23, 0x95, 0xa0, 0x19, 0x2f, 0xd8, 0xfb, 0x5a,
++      0xe2, 0x05, 0xbc, 0x93, 0xa2, 0x07, 0x9d, 0x1f, 0xe8, 0x41, 0xe7, 0xd1,
++      0x83, 0x8e, 0x15, 0x11, 0xe7, 0x09, 0xee, 0xa1, 0xaa, 0xd9, 0xcf, 0x9b,
++      0x31, 0xde, 0x39, 0xdb, 0xbe, 0xec, 0x43, 0x77, 0x05, 0xdd, 0x22, 0xec,
++      0xcf, 0xf5, 0x3b, 0xb3, 0xef, 0x5a, 0xa3, 0xa0, 0x4f, 0x6c, 0x3f, 0xd6,
++      0xf6, 0x8b, 0xd2, 0x8c, 0x49, 0x73, 0x28, 0xa3, 0xf9, 0xf2, 0x1e, 0x9a,
++      0x3b, 0x79, 0x46, 0xca, 0x96, 0xe6, 0x2b, 0xcc, 0x3b, 0xd6, 0xd2, 0x62,
++      0x96, 0x6f, 0x27, 0xf0, 0x3c, 0x94, 0x3d, 0xe7, 0xf4, 0xf7, 0xee, 0xe1,
++      0x7f, 0xc8, 0xe9, 0xbf, 0xf3, 0x99, 0x3a, 0x27, 0xec, 0x93, 0x21, 0x6f,
++      0xc1, 0xe9, 0x7f, 0x27, 0xc1, 0x85, 0x73, 0x84, 0x3e, 0xe9, 0xf7, 0x17,
++      0xc0, 0x60, 0x74, 0x5f, 0x53, 0xb0, 0xbb, 0x31, 0xed, 0x05, 0xe2, 0xda,
++      0xdc, 0xec, 0x11, 0x8b, 0x6f, 0x6a, 0x42, 0x49, 0x8e, 0xb9, 0x83, 0xcf,
++      0x18, 0x17, 0xec, 0x37, 0x03, 0xbc, 0xf7, 0x65, 0x6c, 0xe1, 0xfe, 0x2c,
++      0xc8, 0xe1, 0x96, 0xd5, 0xcb, 0xe9, 0xdf, 0x8b, 0xbc, 0x1a, 0xeb, 0x01,
++      0xea, 0xc6, 0x0c, 0xf5, 0xba, 0xf9, 0x6d, 0x63, 0x05, 0xb5, 0xe6, 0x2d,
++      0xc4, 0x3e, 0xf2, 0xd3, 0xf6, 0x58, 0x5b, 0xf6, 0xdb, 0x02, 0xea, 0xd0,
++      0x08, 0xee, 0x4b, 0xd1, 0xcd, 0x6f, 0x0c, 0x72, 0x01, 0x34, 0x17, 0xb1,
++      0x76, 0xba, 0x9b, 0xf7, 0xbc, 0xe8, 0xf3, 0x81, 0x7b, 0xab, 0xd1, 0xfb,
++      0xa6, 0xe9, 0x0f, 0xd2, 0xf2, 0xf7, 0x2f, 0x97, 0xa2, 0x15, 0x3a, 0x18,
++      0x15, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_TPAT_b09FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_TPAT_b09FwRodata[(0x4/4) + 1] = {
+       0x00000001, 0x00000000 };
+ static struct fw_info bnx2_tpat_fw_09 = {
+-      /* Firmware version: 4.6.15 */
++      /* Firmware version: 4.4.26 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0xf,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x1a,
+       .start_addr                     = 0x08000488,
+       .text_addr                      = 0x08000400,
+-      .text_len                       = 0x13a4,
++      .text_len                       = 0x1514,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_TPAT_b09FwText,
+       .gz_text_len                    = sizeof(bnx2_TPAT_b09FwText),
+@@ -3643,868 +3709,871 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_TPAT_b09FwData,
+-      .sbss_addr                      = 0x080017c0,
+-      .sbss_len                       = 0x40,
++      .sbss_addr                      = 0x08001940,
++      .sbss_len                       = 0x48,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08001800,
++      .bss_addr                       = 0x08001988,
+       .bss_len                        = 0x12b4,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x080017a4,
++      .rodata_addr                    = 0x08001914,
+       .rodata_len                     = 0x4,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_TPAT_b09FwRodata,
+ };
+ static u8 bnx2_TXP_b09FwText[] = {
+-      0xc5, 0x7b, 0x7d, 0x70, 0x1b, 0xe7, 0x79, 0xe7, 0xef, 0xc5, 0x02, 0xe4,
+-      0x02, 0x04, 0x41, 0x90, 0x82, 0x64, 0xf0, 0xca, 0x44, 0x58, 0x61, 0x41,
+-      0xc1, 0x26, 0x2d, 0x2f, 0x28, 0x50, 0x82, 0xcb, 0x55, 0x85, 0x4a, 0xb4,
+-      0x44, 0xc7, 0x74, 0x43, 0x3b, 0x6a, 0x4b, 0x67, 0x3c, 0x09, 0x2a, 0x51,
+-      0x16, 0x2d, 0xcb, 0x16, 0xed, 0xf8, 0x7a, 0xec, 0x9c, 0x27, 0xda, 0x50,
+-      0x1f, 0x96, 0x25, 0x10, 0x00, 0x3f, 0x64, 0xca, 0x9d, 0xce, 0x19, 0x26,
+-      0x29, 0x51, 0xb6, 0xf1, 0x21, 0xc7, 0x4a, 0x6a, 0xcf, 0x24, 0x11, 0x4e,
+-      0x96, 0x65, 0xd9, 0x89, 0x3f, 0x92, 0xf8, 0x7a, 0x4e, 0xa7, 0x37, 0xd5,
+-      0x48, 0xfe, 0x90, 0x2c, 0xf9, 0xa3, 0x69, 0x6f, 0x2a, 0xb5, 0x4e, 0xf7,
+-      0x9e, 0x67, 0x17, 0x94, 0x15, 0xd7, 0x9d, 0x9b, 0xf6, 0xfe, 0x38, 0xce,
+-      0x70, 0x00, 0xec, 0xbe, 0xfb, 0xbe, 0xcf, 0xf7, 0xf3, 0x7b, 0x9e, 0xf7,
+-      0xdd, 0x56, 0xc0, 0x83, 0xea, 0x5f, 0x3d, 0xfd, 0xc7, 0x87, 0x86, 0x1f,
+-      0x8e, 0x2d, 0x5b, 0xb1, 0x8c, 0xbe, 0x76, 0xa2, 0xa1, 0xc6, 0xc9, 0x37,
+-      0x57, 0x08, 0x20, 0xf5, 0x21, 0xfe, 0x43, 0x7f, 0x5f, 0xf9, 0x8f, 0x3d,
+-      0x66, 0xfd, 0x49, 0x80, 0x7f, 0x9e, 0x2e, 0xfe, 0x87, 0xec, 0xd0, 0x93,
+-      0x5d, 0x6b, 0x54, 0xc8, 0x92, 0x7e, 0x79, 0xd5, 0x26, 0x15, 0x48, 0x16,
+-      0xda, 0x42, 0x6b, 0xf1, 0x1b, 0xd3, 0x08, 0x38, 0xc1, 0xd7, 0xbf, 0xa2,
+-      0x7f, 0xb6, 0xe3, 0xc7, 0x2b, 0x95, 0x4f, 0xf3, 0x12, 0x64, 0xbf, 0x7e,
+-      0x10, 0xfe, 0x56, 0xc8, 0x2d, 0xf4, 0xcc, 0x5f, 0x2c, 0x2d, 0x39, 0xe1,
+-      0x9b, 0x9f, 0x0b, 0x86, 0x4b, 0xd7, 0xb0, 0x33, 0x3b, 0x84, 0x23, 0x71,
+-      0xa0, 0x76, 0x34, 0xa2, 0xed, 0x04, 0x72, 0x0e, 0x3d, 0x12, 0x3a, 0x81,
+-      0x10, 0x66, 0x0b, 0x2a, 0x1e, 0x2d, 0xc3, 0x70, 0xea, 0x21, 0x3c, 0x96,
+-      0xfe, 0x17, 0x33, 0xe4, 0xe2, 0x47, 0x86, 0xb0, 0x8b, 0xc6, 0xee, 0x4e,
+-      0x43, 0x0e, 0xea, 0x8f, 0x20, 0x98, 0x85, 0x5c, 0xaf, 0x0f, 0xa3, 0x38,
+-      0x1a, 0x3e, 0x3d, 0x07, 0xa5, 0xaf, 0x59, 0x52, 0x86, 0x80, 0xb6, 0xd4,
+-      0x5d, 0x42, 0xe9, 0x2f, 0x09, 0x25, 0xb1, 0x4d, 0x40, 0x16, 0x34, 0xee,
+-      0x86, 0x02, 0x7f, 0x0e, 0x63, 0x69, 0x41, 0xc6, 0x19, 0x89, 0xe7, 0x59,
+-      0x45, 0xf2, 0x16, 0x70, 0xaa, 0x1a, 0x76, 0x67, 0x79, 0x0d, 0x81, 0x9d,
+-      0xf1, 0x88, 0x7f, 0x06, 0x7c, 0x3f, 0x84, 0x11, 0x6b, 0x9c, 0x42, 0x5c,
+-      0x9b, 0xe6, 0x2e, 0xcd, 0x34, 0x0f, 0x69, 0xb5, 0x30, 0xfc, 0x4a, 0x10,
+-      0x10, 0x18, 0xd1, 0x1c, 0x48, 0xfa, 0xd7, 0x84, 0x9c, 0x50, 0x82, 0x9b,
+-      0xf1, 0xcf, 0xc4, 0x73, 0x32, 0xea, 0x82, 0x3d, 0x3e, 0x85, 0x5a, 0x54,
+-      0xfc, 0xb6, 0xd4, 0xa6, 0xd3, 0xa6, 0x79, 0x4a, 0x75, 0xe2, 0x10, 0xc9,
+-      0x67, 0xa4, 0xf0, 0xcf, 0x66, 0x85, 0x64, 0xb3, 0x4b, 0x9d, 0x5f, 0x5f,
+-      0x46, 0xde, 0x6f, 0x9a, 0x33, 0x74, 0x6f, 0x4f, 0x61, 0x5e, 0xce, 0xa6,
+-      0xe9, 0x50, 0x4d, 0x73, 0x93, 0xfa, 0x4f, 0xe6, 0xc6, 0xdf, 0x1a, 0x1b,
+-      0xc3, 0x33, 0x39, 0x3f, 0x9e, 0xcd, 0x26, 0x51, 0x48, 0x9b, 0x90, 0x74,
+-      0x27, 0x06, 0x47, 0x43, 0xd8, 0x56, 0xec, 0x46, 0x31, 0xad, 0xa4, 0xce,
+-      0xd0, 0x73, 0x1b, 0xe3, 0x2a, 0xee, 0x2f, 0xf6, 0x60, 0x2e, 0x0d, 0xd3,
+-      0xad, 0xab, 0x15, 0xb7, 0x88, 0x62, 0x4b, 0xb1, 0x17, 0xa5, 0xb4, 0x7a,
+-      0x7a, 0x44, 0x44, 0x86, 0x9b, 0x25, 0x27, 0xb6, 0x17, 0xdb, 0xf1, 0x40,
+-      0x31, 0x41, 0xcf, 0x98, 0xf8, 0x5a, 0xac, 0x85, 0xc6, 0x77, 0xe0, 0xe9,
+-      0x49, 0xd3, 0x8c, 0xc6, 0xfc, 0x18, 0x2c, 0x6a, 0x98, 0xcb, 0x39, 0x90,
+-      0x3a, 0xe4, 0x44, 0xea, 0x29, 0x60, 0xcb, 0x53, 0x1d, 0x98, 0xc9, 0x99,
+-      0xd8, 0xa8, 0x8d, 0x34, 0x3b, 0xe0, 0x42, 0xca, 0x2f, 0xe0, 0x52, 0x7d,
+-      0xd8, 0xec, 0xb7, 0x69, 0x3f, 0x23, 0x09, 0x6c, 0x7d, 0x2a, 0x8a, 0x77,
+-      0xd2, 0x06, 0xbe, 0xd6, 0x19, 0xc4, 0x70, 0x31, 0x80, 0x37, 0xd3, 0x01,
+-      0x5a, 0x43, 0xc3, 0x1b, 0x69, 0x99, 0xd6, 0x69, 0xc7, 0xc9, 0x34, 0x8f,
+-      0xe1, 0xb1, 0x5e, 0x0c, 0x14, 0x5b, 0xf0, 0x7a, 0x3a, 0x48, 0x6b, 0x06,
+-      0xf0, 0x2a, 0x8d, 0xbb, 0xb7, 0xa8, 0xe2, 0x34, 0x8d, 0x1b, 0x2c, 0x86,
+-      0xf0, 0x4a, 0xda, 0x4b, 0xb4, 0x06, 0x70, 0x22, 0x3d, 0x84, 0x9d, 0xe9,
+-      0xb6, 0xd3, 0x6b, 0x49, 0x86, 0xa1, 0x05, 0xbc, 0x0e, 0x5f, 0x7b, 0xd7,
+-      0xec, 0x0d, 0x58, 0xa6, 0x42, 0xeb, 0xcc, 0xaf, 0x3b, 0x84, 0x91, 0xf4,
+-      0xa9, 0xaa, 0xbf, 0x68, 0x78, 0x2c, 0x77, 0xd9, 0xfc, 0xf1, 0xd2, 0x16,
+-      0x1c, 0xc9, 0x02, 0x4f, 0xcf, 0x00, 0x33, 0x59, 0xc3, 0xac, 0xd7, 0x4d,
+-      0x73, 0xba, 0xb3, 0x9d, 0xe4, 0xa5, 0xf6, 0x6f, 0xa4, 0x51, 0xcf, 0x96,
+-      0x9d, 0xc0, 0x53, 0x4a, 0x7f, 0x05, 0x0e, 0xe4, 0xe7, 0x9c, 0xa8, 0x19,
+-      0x55, 0x7a, 0xf2, 0x50, 0x4e, 0x6f, 0x21, 0x8f, 0x3a, 0x94, 0x55, 0xfa,
+-      0x0c, 0xec, 0x30, 0x83, 0x7a, 0x6b, 0xa8, 0x5d, 0x32, 0xe1, 0x23, 0x5b,
+-      0x48, 0xb7, 0x9b, 0x66, 0xc3, 0x4a, 0xd3, 0x7c, 0xbd, 0x13, 0xa6, 0x43,
+-      0x57, 0x4f, 0x97, 0xa1, 0x56, 0x3e, 0x82, 0x3a, 0x7c, 0x02, 0x95, 0xaf,
+-      0x78, 0x11, 0x19, 0x0c, 0x4b, 0x91, 0xa1, 0xcb, 0xf4, 0x6c, 0x7d, 0x91,
+-      0xcc, 0x99, 0x78, 0x51, 0x47, 0x81, 0x62, 0x59, 0x86, 0x93, 0xf8, 0x69,
+-      0x1f, 0x35, 0x4d, 0xa7, 0xea, 0x85, 0x97, 0xe4, 0xbb, 0xfe, 0x80, 0x69,
+-      0xbe, 0xaf, 0xf9, 0x51, 0x43, 0xba, 0xb9, 0x65, 0xcc, 0xc4, 0xb4, 0x76,
+-      0x82, 0xe4, 0x29, 0x90, 0xea, 0x8b, 0xd3, 0x33, 0x01, 0x1a, 0x9f, 0xc0,
+-      0xfa, 0xd1, 0x20, 0x9e, 0xc9, 0xca, 0xf8, 0xf1, 0xd2, 0x28, 0xea, 0x68,
+-      0x2e, 0x0f, 0xc9, 0xaa, 0x96, 0xe4, 0x87, 0x22, 0x99, 0x5b, 0xd1, 0xb6,
+-      0x47, 0x14, 0xcf, 0x10, 0x8f, 0x41, 0x7c, 0xbf, 0x1c, 0xc0, 0x73, 0x65,
+-      0x3f, 0x8e, 0x96, 0x5b, 0x70, 0xbc, 0xac, 0xe1, 0x60, 0x4e, 0xd9, 0x5b,
+-      0x81, 0x89, 0x7a, 0x7d, 0x07, 0x1a, 0x96, 0x03, 0x6f, 0xe6, 0x63, 0xc8,
+-      0xe4, 0x4c, 0xb3, 0x40, 0x74, 0x7b, 0x88, 0x8f, 0x37, 0xf2, 0x5f, 0xc5,
+-      0xe1, 0x49, 0x27, 0x42, 0xd3, 0x01, 0x3c, 0x9b, 0x76, 0xe2, 0xfa, 0x8c,
+-      0x62, 0xe4, 0xa1, 0x46, 0xb7, 0x09, 0x35, 0x79, 0x83, 0x50, 0x72, 0x06,
+-      0x22, 0x21, 0x97, 0x70, 0xa0, 0xf5, 0xb0, 0x13, 0x6a, 0x29, 0x04, 0x57,
+-      0xab, 0x0c, 0xb5, 0xf5, 0x21, 0xc0, 0xe7, 0x40, 0x0d, 0xf9, 0xc6, 0xfa,
+-      0xf1, 0x28, 0x5d, 0x0b, 0xd0, 0x35, 0x7c, 0xb5, 0x16, 0xd2, 0x22, 0x09,
+-      0x24, 0x3b, 0x55, 0x42, 0xd2, 0x69, 0x9a, 0x92, 0xda, 0x81, 0xbb, 0x1e,
+-      0x37, 0xcd, 0xf0, 0x72, 0x1e, 0xef, 0x47, 0xb8, 0x44, 0x72, 0x68, 0x25,
+-      0xba, 0xb2, 0x44, 0x67, 0x96, 0xe8, 0xcc, 0x12, 0x9d, 0x59, 0x89, 0xec,
+-      0x46, 0xd1, 0x80, 0x47, 0x48, 0x5f, 0x21, 0xe2, 0xf1, 0x1d, 0x4b, 0x57,
+-      0xcf, 0x95, 0x83, 0xc4, 0x43, 0xc8, 0xe2, 0xe1, 0xe9, 0x9c, 0x80, 0x43,
+-      0x55, 0xfa, 0xce, 0x60, 0x35, 0xc2, 0x31, 0x25, 0x99, 0x47, 0x92, 0x9e,
+-      0x53, 0xf6, 0x1a, 0x50, 0x7a, 0x2a, 0x64, 0x03, 0x1b, 0xfd, 0x09, 0xcc,
+-      0x65, 0x5d, 0xa8, 0x53, 0x95, 0x10, 0xe9, 0x2c, 0x5a, 0xc1, 0x02, 0xdc,
+-      0xe7, 0xa7, 0x39, 0x1d, 0xb2, 0xb0, 0x63, 0xc9, 0x23, 0x88, 0x8c, 0x3b,
+-      0x30, 0xab, 0x49, 0xe4, 0xa3, 0x1a, 0xa4, 0x56, 0x5a, 0xae, 0x14, 0xa7,
+-      0x4f, 0x9a, 0x3f, 0x4b, 0x6b, 0x11, 0x3d, 0x34, 0x1f, 0xf9, 0x26, 0xcb,
+-      0x32, 0x4a, 0x34, 0x3c, 0x6a, 0xd1, 0x7b, 0xb4, 0xfc, 0x75, 0x61, 0xdb,
+-      0x90, 0x4e, 0x36, 0xa3, 0x84, 0x20, 0x94, 0x68, 0x48, 0x28, 0x5a, 0x52,
+-      0xf8, 0x31, 0x53, 0x7e, 0x83, 0xc6, 0x04, 0xae, 0x19, 0xd3, 0x87, 0x91,
+-      0xac, 0xc0, 0x5a, 0xd5, 0xc4, 0x1a, 0xad, 0x0f, 0x3b, 0xcb, 0xf3, 0xbe,
+-      0xc9, 0x31, 0xcc, 0xef, 0x9b, 0x49, 0x77, 0x63, 0x57, 0x36, 0x84, 0x9d,
+-      0x85, 0xa0, 0x6f, 0x3a, 0xcd, 0xf7, 0x54, 0xf2, 0x79, 0xbe, 0x17, 0xb8,
+-      0xe6, 0x5e, 0xcb, 0x35, 0xf7, 0x12, 0x18, 0x99, 0xf8, 0x1d, 0x8a, 0x23,
+-      0x0d, 0xd8, 0xa9, 0x7e, 0x4a, 0xf6, 0xa2, 0x26, 0x06, 0xd0, 0x8c, 0x33,
+-      0xfe, 0x76, 0xec, 0x9f, 0xea, 0xc5, 0xae, 0xa9, 0x65, 0x78, 0x6c, 0xa2,
+-      0x25, 0xe5, 0xd1, 0x49, 0x38, 0x9e, 0x70, 0x72, 0x40, 0x28, 0x43, 0x92,
+-      0x08, 0x47, 0x07, 0xc8, 0x7e, 0x5b, 0x1b, 0x4d, 0xf3, 0x44, 0x8c, 0xec,
+-      0x5b, 0x6b, 0xd3, 0xd6, 0x93, 0x00, 0x2a, 0x7d, 0x4a, 0xcf, 0xbb, 0xf0,
+-      0xe2, 0x76, 0xb2, 0xbb, 0x99, 0x18, 0x06, 0x24, 0x48, 0xed, 0x5e, 0xfc,
+-      0xbd, 0xf9, 0x94, 0x93, 0xe5, 0x6e, 0xee, 0xd8, 0xa4, 0xed, 0x15, 0x1c,
+-      0xeb, 0x6a, 0xae, 0xc6, 0x13, 0x9e, 0x9f, 0x9f, 0x21, 0xdd, 0xd1, 0x3c,
+-      0x83, 0xb1, 0xb6, 0xc4, 0x20, 0x2e, 0x9b, 0x67, 0x36, 0xf4, 0x62, 0xe7,
+-      0xdc, 0x32, 0xec, 0x9b, 0x70, 0x21, 0xd9, 0x28, 0xd0, 0xa0, 0x86, 0x2b,
+-      0xf7, 0x61, 0x19, 0x8c, 0x19, 0x7e, 0xae, 0x17, 0x07, 0xe7, 0xec, 0xdf,
+-      0xd9, 0xab, 0xbf, 0xe7, 0xe7, 0x3b, 0x4f, 0x3a, 0x65, 0x79, 0x72, 0xac,
+-      0x24, 0x15, 0xe8, 0x6d, 0x38, 0x32, 0x11, 0x20, 0xdd, 0x76, 0x0b, 0xe7,
+-      0xe1, 0x45, 0x3e, 0xcf, 0xe3, 0x26, 0x4e, 0x69, 0xa4, 0xe7, 0xec, 0x3a,
+-      0xe1, 0x39, 0xdc, 0x23, 0x5c, 0xa5, 0x3b, 0x45, 0xcd, 0xf4, 0x37, 0x85,
+-      0x7c, 0x38, 0x25, 0x6a, 0x4b, 0xed, 0x24, 0xfb, 0x7e, 0xe1, 0x3e, 0xac,
+-      0x84, 0x42, 0xe2, 0x11, 0xd2, 0xe7, 0x06, 0x21, 0x95, 0xe0, 0x77, 0xe8,
+-      0xc3, 0xc2, 0x51, 0xa2, 0x39, 0x2c, 0x1b, 0xe2, 0x75, 0x82, 0xa4, 0x37,
+-      0x18, 0x92, 0x3e, 0x84, 0x8d, 0x14, 0xff, 0x6f, 0x4d, 0xeb, 0x78, 0x34,
+-      0x5b, 0x4b, 0x31, 0x92, 0x7d, 0xff, 0x32, 0xad, 0xab, 0xe2, 0x31, 0xca,
+-      0x15, 0xb2, 0xbe, 0x0f, 0x3e, 0xf2, 0xb9, 0xd7, 0x63, 0xec, 0x8f, 0x40,
+-      0x21, 0x1b, 0xee, 0x7f, 0x54, 0x98, 0xe6, 0xd6, 0x88, 0xb9, 0x78, 0x5d,
+-      0xac, 0x2d, 0x7a, 0x12, 0xff, 0x68, 0xe6, 0x03, 0x43, 0xa8, 0xef, 0xa4,
+-      0x7b, 0xa3, 0x90, 0x5d, 0xfa, 0x2e, 0x1c, 0xa2, 0x5c, 0xe2, 0xd1, 0x29,
+-      0xbe, 0x8c, 0x86, 0xfb, 0x1f, 0x13, 0x1c, 0xf3, 0x95, 0xca, 0xb3, 0x18,
+-      0x39, 0x5d, 0x0b, 0x25, 0xb4, 0x46, 0xb4, 0x69, 0x75, 0x92, 0x91, 0x68,
+-      0xa6, 0x14, 0xe7, 0xee, 0x54, 0x86, 0xf7, 0x40, 0xf1, 0x5f, 0x00, 0xfb,
+-      0x2a, 0xe7, 0x93, 0x5d, 0x48, 0x58, 0x79, 0xc5, 0xc0, 0x4d, 0x57, 0xf3,
+-      0x8a, 0x4e, 0x76, 0x52, 0x8b, 0x3d, 0x44, 0xd7, 0xcb, 0x9a, 0x12, 0x9c,
+-      0x86, 0xb9, 0x78, 0x40, 0xe3, 0x7b, 0x3a, 0x76, 0x95, 0xcd, 0x90, 0xa4,
+-      0xb3, 0xac, 0x90, 0xaa, 0xd5, 0x99, 0x56, 0x3f, 0xf9, 0xc6, 0x6f, 0xcc,
+-      0x81, 0xb8, 0xac, 0xbd, 0x57, 0xf0, 0x93, 0xbc, 0xe0, 0x73, 0x16, 0xbf,
+-      0x2c, 0xff, 0x9a, 0x70, 0xe8, 0xbf, 0x31, 0xbf, 0x1d, 0x87, 0x6f, 0x71,
+-      0xd1, 0x99, 0xaa, 0xd3, 0xd1, 0x37, 0x3c, 0xba, 0xc3, 0x6c, 0x56, 0x1d,
+-      0x14, 0xab, 0x54, 0x8a, 0xed, 0xde, 0xc4, 0xa5, 0x4e, 0xb7, 0x78, 0xbd,
+-      0x33, 0xd8, 0xfb, 0x51, 0xc1, 0x4d, 0x7a, 0x46, 0xdf, 0xb6, 0x62, 0xc2,
+-      0xf9, 0x21, 0xd9, 0x5a, 0x0d, 0xc5, 0x55, 0x14, 0x5b, 0x7a, 0x2f, 0x50,
+-      0x2e, 0xba, 0x25, 0xe6, 0xfe, 0xe3, 0x1a, 0xdd, 0xf1, 0x55, 0x37, 0x1e,
+-      0xbc, 0x69, 0x36, 0xd1, 0x40, 0xb1, 0xdd, 0x8f, 0xd3, 0xf1, 0x1e, 0x8c,
+-      0x94, 0x6b, 0xc9, 0x0e, 0x9f, 0xaf, 0xec, 0x56, 0x5b, 0x7a, 0x2f, 0xa6,
+-      0x17, 0x53, 0x2c, 0xc1, 0x67, 0x85, 0x4e, 0xb5, 0x6f, 0x9b, 0x38, 0x71,
+-      0xab, 0x07, 0x71, 0x92, 0xab, 0x2c, 0x5f, 0x49, 0xe3, 0xd3, 0xc5, 0xaa,
+-      0x5a, 0x59, 0x2d, 0xb5, 0x0e, 0xc9, 0x52, 0xeb, 0x70, 0x0d, 0xc5, 0xe1,
+-      0xf3, 0x37, 0x0a, 0x9c, 0xba, 0x31, 0x92, 0xa8, 0x11, 0x6e, 0x9c, 0xe9,
+-      0x4b, 0x90, 0x9d, 0xb4, 0xa4, 0xdc, 0x3a, 0xc5, 0x8f, 0x51, 0x01, 0x49,
+-      0x4d, 0x60, 0xe7, 0x0c, 0x1e, 0x19, 0xd1, 0x7a, 0x61, 0xcc, 0xb1, 0x0d,
+-      0xb5, 0x63, 0x64, 0xae, 0x0f, 0x46, 0x59, 0x42, 0x3e, 0x40, 0xcc, 0x97,
+-      0x91, 0x72, 0xe9, 0xed, 0xdd, 0xf9, 0xc2, 0x5d, 0x2e, 0xdb, 0x87, 0x89,
+-      0xff, 0xec, 0xa4, 0x0f, 0x1e, 0xd6, 0xf3, 0x69, 0x92, 0x51, 0x3b, 0x9e,
+-      0x2f, 0x47, 0x29, 0xde, 0x69, 0x24, 0x17, 0x95, 0xe2, 0x45, 0x88, 0xec,
+-      0x4b, 0xc6, 0xc6, 0x09, 0xe5, 0x20, 0xc5, 0x85, 0x5c, 0x9e, 0x40, 0x51,
+-      0x32, 0xe0, 0xa7, 0xfc, 0xfd, 0x6a, 0x35, 0x06, 0x0c, 0xd2, 0xa7, 0x62,
+-      0x24, 0x81, 0x93, 0x0e, 0xa0, 0xa3, 0x59, 0x8f, 0xec, 0x6d, 0x26, 0x7d,
+-      0x34, 0x96, 0xdc, 0xd8, 0x3e, 0xd1, 0x84, 0x07, 0xa6, 0x3c, 0xd8, 0x3a,
+-      0x61, 0xe2, 0x52, 0x8c, 0x6d, 0x43, 0xe9, 0x27, 0x12, 0xbb, 0xeb, 0x48,
+-      0xae, 0xb7, 0xc6, 0x22, 0x09, 0xb7, 0x70, 0xa2, 0xb6, 0xd4, 0x47, 0x38,
+-      0x20, 0xc9, 0x7e, 0xa1, 0xd1, 0x1c, 0xa1, 0x9d, 0xda, 0xed, 0x48, 0x05,
+-      0x64, 0xb8, 0x4a, 0x5e, 0x8a, 0x25, 0xec, 0xc7, 0x7c, 0xef, 0xeb, 0xd8,
+-      0x58, 0xe3, 0x85, 0x94, 0x91, 0x91, 0x23, 0x0c, 0x80, 0x45, 0x35, 0xe8,
+-      0x69, 0x75, 0xd0, 0x7f, 0xc0, 0x37, 0x3b, 0xd9, 0xe2, 0x3b, 0x44, 0xf1,
+-      0x75, 0x4b, 0xd6, 0xc1, 0xeb, 0x30, 0x66, 0xa0, 0xb9, 0xfd, 0x78, 0x9a,
+-      0xe2, 0xf5, 0x43, 0x14, 0x7f, 0x8e, 0x94, 0xcb, 0x82, 0xe3, 0x89, 0xc5,
+-      0x4f, 0x96, 0x78, 0xcb, 0x12, 0x6f, 0x59, 0xe2, 0x8b, 0xe2, 0xc2, 0xd1,
+-      0x2c, 0xf3, 0xf1, 0x6b, 0xf2, 0xd1, 0x04, 0xf1, 0xee, 0xc6, 0x66, 0xa2,
+-      0xf7, 0xc1, 0xa9, 0x3a, 0x6c, 0x23, 0x7a, 0x8b, 0x9a, 0xa2, 0x3d, 0x27,
+-      0x4c, 0xec, 0x8f, 0x29, 0xc6, 0x4f, 0x29, 0x10, 0x39, 0x5a, 0x4d, 0xb3,
+-      0x4f, 0x63, 0x9e, 0x29, 0x5e, 0x39, 0x2c, 0x9e, 0xf7, 0x26, 0xe1, 0xc6,
+-      0x20, 0x3d, 0x33, 0x30, 0x85, 0xcf, 0x1c, 0xc4, 0x93, 0x9b, 0x78, 0xdc,
+-      0xa7, 0x29, 0x89, 0x1b, 0x28, 0xae, 0x9f, 0x53, 0x23, 0x95, 0x73, 0x12,
+-      0x7e, 0x9f, 0xe4, 0x31, 0xcc, 0xf2, 0xb8, 0x89, 0xf8, 0x79, 0x80, 0xf0,
+-      0x4e, 0x3d, 0xc5, 0xa5, 0xc2, 0x81, 0x48, 0xf4, 0x97, 0xc4, 0x7b, 0xa4,
+-      0x44, 0xb4, 0x8f, 0xda, 0xb4, 0xdf, 0xc7, 0xb4, 0xc7, 0x4c, 0xdc, 0x43,
+-      0xb4, 0x1f, 0x26, 0xda, 0x07, 0xb3, 0x2c, 0x0f, 0xce, 0x3b, 0x36, 0xfd,
+-      0x47, 0xca, 0xbc, 0xee, 0x97, 0xf1, 0x30, 0x4f, 0x7f, 0x13, 0x36, 0x4e,
+-      0xcd, 0xcb, 0xcb, 0x34, 0xbf, 0xad, 0x1d, 0x33, 0xff, 0x84, 0x64, 0xb6,
+-      0xb8, 0xc4, 0x72, 0x83, 0x51, 0xab, 0x47, 0x0e, 0x6e, 0xc1, 0x7d, 0x0e,
+-      0x78, 0xbc, 0x58, 0x50, 0xe2, 0x5c, 0x10, 0xc2, 0x31, 0xd2, 0xef, 0x71,
+-      0xca, 0x67, 0xcf, 0x97, 0xaf, 0xcd, 0x6f, 0xac, 0xeb, 0x49, 0xd2, 0xb1,
+-      0x92, 0x37, 0x28, 0xb6, 0xa5, 0xca, 0x49, 0xec, 0x9e, 0x42, 0x72, 0x56,
+-      0xfb, 0x6f, 0x14, 0x60, 0x16, 0x91, 0x7d, 0xd5, 0x26, 0xfd, 0xaa, 0x07,
+-      0x9b, 0x66, 0x02, 0x18, 0x2a, 0xaf, 0x41, 0x96, 0xe2, 0xcd, 0x36, 0x8a,
+-      0xcf, 0x1f, 0xc7, 0x92, 0x5b, 0x7d, 0x88, 0x90, 0x7e, 0x03, 0xb8, 0x8f,
+-      0x9e, 0xd9, 0x37, 0xc5, 0x3c, 0xf8, 0xab, 0x7a, 0x0e, 0x60, 0x0b, 0x5d,
+-      0xdb, 0x33, 0x25, 0xe3, 0x25, 0xed, 0x49, 0xc2, 0x34, 0x36, 0xc6, 0xb8,
+-      0x27, 0x0b, 0x3f, 0xb9, 0x27, 0x61, 0xc0, 0x48, 0xf4, 0x25, 0xfa, 0xbd,
+-      0xb9, 0xec, 0xf1, 0x8d, 0x4c, 0xe2, 0x7b, 0x8b, 0x75, 0x1f, 0x16, 0x10,
+-      0x1e, 0xbb, 0x4b, 0x8b, 0x90, 0xdd, 0x3b, 0x31, 0x5c, 0x76, 0xe0, 0x3b,
+-      0x33, 0x1e, 0x3c, 0x34, 0xf1, 0x99, 0x59, 0x13, 0x77, 0xe2, 0x8e, 0x56,
+-      0x0f, 0x1e, 0x9c, 0x49, 0x62, 0xef, 0x14, 0x42, 0xb5, 0xb1, 0x31, 0x8a,
+-      0xdd, 0x76, 0x3e, 0xa8, 0x23, 0xde, 0x1f, 0x9b, 0xf2, 0xfa, 0x06, 0x0f,
+-      0xb0, 0x0c, 0xd6, 0x04, 0xdd, 0x40, 0xa5, 0x36, 0x26, 0x61, 0xb3, 0x26,
+-      0x2d, 0xa8, 0x25, 0x43, 0x7f, 0x92, 0xe6, 0x9b, 0x86, 0xf4, 0xda, 0x62,
+-      0x44, 0x0e, 0x36, 0x4b, 0x95, 0xdc, 0x02, 0x34, 0xe1, 0xa1, 0xb9, 0x24,
+-      0xc6, 0xc8, 0x46, 0xb7, 0x4f, 0x8c, 0x7c, 0xaf, 0x91, 0x62, 0x88, 0xaf,
+-      0x43, 0x19, 0x7c, 0x53, 0xe8, 0x28, 0x44, 0xdc, 0xd8, 0x36, 0xe3, 0xf5,
+-      0x6d, 0x3d, 0x60, 0xae, 0x66, 0x7b, 0xba, 0x77, 0xae, 0x09, 0xf7, 0x4f,
+-      0xd1, 0xb5, 0x09, 0xb6, 0x61, 0xb2, 0xb5, 0x48, 0x2d, 0xf1, 0x16, 0x4e,
+-      0xba, 0x09, 0x33, 0x49, 0xb1, 0x3a, 0x92, 0x87, 0x1b, 0x5b, 0x2c, 0x5b,
+-      0xf0, 0x63, 0xf3, 0x94, 0x89, 0xb3, 0x5a, 0x14, 0x39, 0xb2, 0xeb, 0x83,
+-      0x53, 0xca, 0xe5, 0x6e, 0xc2, 0x3b, 0xef, 0x49, 0xca, 0xc1, 0x56, 0x29,
+-      0x89, 0xa6, 0xe5, 0x14, 0xe3, 0x9b, 0x4c, 0xf3, 0x9e, 0x8e, 0xb6, 0xa1,
+-      0xb7, 0x88, 0xe6, 0x46, 0x7d, 0x11, 0x2a, 0x8d, 0x4a, 0x8e, 0xb0, 0xf3,
+-      0x70, 0x8d, 0xe3, 0x46, 0x9c, 0x59, 0x48, 0x7a, 0x06, 0xc7, 0xf2, 0x80,
+-      0xaf, 0x29, 0x63, 0xe7, 0xb8, 0x26, 0xb2, 0x93, 0xc6, 0x4c, 0xd0, 0xd7,
+-      0x58, 0x82, 0xaf, 0xa6, 0x04, 0xbc, 0x40, 0xf1, 0x65, 0xc1, 0xf2, 0xdf,
+-      0x98, 0xa9, 0x26, 0x0b, 0x13, 0xfa, 0x5e, 0x9c, 0x54, 0x8c, 0x0a, 0x94,
+-      0xbd, 0x14, 0x2a, 0xf1, 0xc4, 0x9c, 0xd3, 0x77, 0x98, 0xf0, 0x5f, 0x93,
+-      0x1a, 0xc5, 0x1e, 0xd2, 0xe7, 0x0e, 0xb2, 0x85, 0xbf, 0x27, 0x7c, 0xf2,
+-      0x58, 0x26, 0x1c, 0xd2, 0x44, 0x3f, 0x4d, 0x0c, 0xec, 0x2a, 0x51, 0xcc,
+-      0x77, 0xac, 0xa5, 0x20, 0xa6, 0x44, 0x29, 0xad, 0x21, 0x9d, 0x71, 0xc1,
+-      0x58, 0x68, 0xeb, 0xe4, 0xfe, 0xec, 0x71, 0xd3, 0xa7, 0xaa, 0xf9, 0x12,
+-      0xe9, 0xec, 0xe1, 0xb2, 0x17, 0xc3, 0x84, 0x07, 0x16, 0x10, 0x8e, 0x7c,
+-      0x90, 0xec, 0x62, 0xfb, 0x84, 0x44, 0xf4, 0xf1, 0xb8, 0x24, 0x92, 0x8b,
+-      0x6c, 0x3c, 0xfa, 0xd0, 0x0c, 0xdb, 0x25, 0xd9, 0x11, 0xd9, 0xe2, 0x31,
+-      0xca, 0xf9, 0xcf, 0xff, 0x16, 0x06, 0x51, 0xfc, 0xc6, 0xd5, 0xdc, 0x6f,
+-      0xcb, 0x63, 0x64, 0x8a, 0x79, 0x56, 0x0e, 0xc2, 0x91, 0xc4, 0x2d, 0xda,
+-      0xaf, 0x28, 0x27, 0x30, 0xef, 0x84, 0x83, 0xa7, 0xa2, 0x94, 0x57, 0x08,
+-      0xdb, 0xc4, 0x2e, 0x99, 0x5b, 0x02, 0x2c, 0x03, 0xe6, 0xe7, 0x66, 0x89,
+-      0xf3, 0x67, 0x13, 0xe1, 0xdf, 0xff, 0x77, 0xbb, 0xdb, 0x64, 0xa6, 0x2c,
+-      0x3c, 0x4b, 0x38, 0x9b, 0xec, 0x29, 0x75, 0xd5, 0x7e, 0x1e, 0x34, 0xcf,
+-      0x04, 0x38, 0x5f, 0x37, 0x21, 0x75, 0xd5, 0x16, 0xd8, 0x96, 0xb0, 0x58,
+-      0xeb, 0xd8, 0xf9, 0xa0, 0x1f, 0x6c, 0x0f, 0xd1, 0x6b, 0xec, 0xc1, 0x43,
+-      0x34, 0xf9, 0xb1, 0x75, 0x8e, 0xed, 0xd7, 0xfc, 0x64, 0xb1, 0xfe, 0x2f,
+-      0xe6, 0x95, 0x95, 0xea, 0xc1, 0x5f, 0xe1, 0xeb, 0x74, 0x3d, 0x80, 0xef,
+-      0x90, 0x1f, 0xdd, 0x47, 0x7c, 0x6e, 0xed, 0x7c, 0xc0, 0xf2, 0xdb, 0xad,
+-      0xe5, 0xdf, 0xa3, 0xeb, 0x2c, 0xef, 0x6e, 0x8a, 0x73, 0x1a, 0xf6, 0x65,
+-      0x2b, 0x9c, 0x87, 0xc8, 0xe6, 0xe3, 0xf8, 0x4b, 0x8a, 0xb3, 0xc7, 0xca,
+-      0x8c, 0xc9, 0x12, 0x16, 0x1e, 0xfb, 0x61, 0xb9, 0x1d, 0x3f, 0x20, 0x9f,
+-      0x7c, 0x9e, 0x62, 0xee, 0xf7, 0x2d, 0x9c, 0xe6, 0x14, 0x8f, 0xa6, 0x55,
+-      0x3c, 0x4d, 0x58, 0x7f, 0x5f, 0x21, 0x84, 0x23, 0xe9, 0xf0, 0xde, 0x0b,
+-      0x50, 0x5e, 0x20, 0x79, 0xf9, 0xf6, 0x52, 0x8d, 0x76, 0x38, 0xad, 0xe4,
+-      0x81, 0xa0, 0x6f, 0x4f, 0xc1, 0xef, 0x1b, 0x49, 0x07, 0x7c, 0x23, 0x84,
+-      0x81, 0x76, 0xa6, 0x5b, 0x7c, 0x3b, 0x0b, 0xcb, 0x11, 0x6a, 0x82, 0xb1,
+-      0x88, 0x72, 0xc2, 0x7d, 0x13, 0x1b, 0x90, 0x6a, 0xb4, 0xe3, 0xfc, 0x03,
+-      0x53, 0x1c, 0x83, 0xdb, 0x52, 0x37, 0x3a, 0xbe, 0x5e, 0xd5, 0xb7, 0x1f,
+-      0x43, 0x74, 0xad, 0xa1, 0x03, 0xbe, 0x37, 0xad, 0x58, 0x0b, 0x3c, 0x4f,
+-      0xb6, 0xf5, 0x50, 0xc7, 0x6f, 0xcc, 0x64, 0xd5, 0xb6, 0x7e, 0x30, 0xe9,
+-      0xa4, 0xf8, 0x6a, 0x9a, 0x47, 0x3b, 0x04, 0x02, 0x1d, 0xdd, 0x30, 0x9a,
+-      0xe6, 0x6b, 0xc8, 0x64, 0xbe, 0xb9, 0x83, 0x22, 0x94, 0x7a, 0x0b, 0x12,
+-      0x0b, 0x28, 0xb5, 0x74, 0xac, 0xae, 0xde, 0x93, 0xf1, 0x9d, 0x09, 0x37,
+-      0x52, 0x4d, 0x7e, 0xcc, 0x12, 0x36, 0xd9, 0x68, 0xc5, 0xa2, 0xb6, 0xd3,
+-      0xc7, 0xa9, 0x96, 0x09, 0x7d, 0xc3, 0x4f, 0xbc, 0x26, 0x21, 0x77, 0x10,
+-      0x90, 0xa8, 0xd2, 0xc4, 0xbf, 0x73, 0x73, 0x51, 0xec, 0x2e, 0xff, 0xd8,
+-      0x61, 0xe7, 0x13, 0x25, 0x9f, 0xc4, 0x4f, 0x28, 0x2f, 0xd2, 0xbd, 0xec,
+-      0x9b, 0x66, 0xc8, 0xb2, 0x33, 0x81, 0xc7, 0x97, 0x45, 0xf6, 0xfe, 0x4f,
+-      0xc7, 0x75, 0xc4, 0x17, 0xc9, 0x2a, 0x6b, 0xd5, 0x8e, 0x0d, 0xd7, 0xa9,
+-      0x0f, 0xe2, 0x2f, 0xfd, 0x2c, 0xcb, 0x61, 0x91, 0xa5, 0x3a, 0xf5, 0x8c,
+-      0x0b, 0x0d, 0x41, 0x35, 0x8b, 0x17, 0xfa, 0xf8, 0x5a, 0xc0, 0xf7, 0x44,
+-      0x3a, 0xe9, 0x08, 0xa8, 0xf0, 0xbb, 0xf4, 0x6e, 0xf1, 0x04, 0x61, 0xc0,
+-      0x89, 0x74, 0x8f, 0x98, 0x28, 0xdc, 0x29, 0x8c, 0xfc, 0x37, 0x85, 0x31,
+-      0x9b, 0x12, 0x46, 0xa1, 0x9f, 0x3e, 0x37, 0x88, 0xc9, 0xc2, 0xb0, 0xd8,
+-      0x5d, 0xe0, 0x79, 0x49, 0x27, 0x34, 0xf7, 0x0f, 0x29, 0xc6, 0xfe, 0x80,
+-      0x62, 0xec, 0x31, 0x8a, 0xb1, 0xcf, 0x93, 0x5d, 0x7f, 0xff, 0x2a, 0x96,
+-      0x65, 0x5b, 0x4e, 0x32, 0x06, 0xf1, 0xfd, 0xbc, 0xf4, 0x12, 0xe9, 0x95,
+-      0x65, 0xf6, 0x13, 0xb2, 0x61, 0x96, 0xc5, 0x7f, 0xe6, 0x9c, 0x40, 0xfa,
+-      0xf8, 0xd0, 0xb2, 0xd9, 0xc7, 0x97, 0x31, 0x66, 0x1a, 0x16, 0x3b, 0x98,
+-      0xae, 0x5a, 0xaa, 0xdb, 0x55, 0xc2, 0x21, 0xd9, 0x61, 0xb1, 0xb1, 0xc0,
+-      0xd7, 0xf7, 0xe1, 0x3e, 0xaa, 0xff, 0xb6, 0xc6, 0xc2, 0x89, 0x6e, 0xc2,
+-      0x48, 0x17, 0x54, 0x73, 0x71, 0x34, 0x46, 0x98, 0xe1, 0xc6, 0x2b, 0x54,
+-      0xab, 0x22, 0xb9, 0x2d, 0xae, 0xe4, 0xf3, 0x76, 0x5e, 0xcd, 0xa5, 0xc1,
+-      0x75, 0x3a, 0x1a, 0x9c, 0xaa, 0x72, 0x24, 0x89, 0xf0, 0xde, 0xb8, 0x03,
+-      0x46, 0x8d, 0xee, 0xc2, 0x80, 0x55, 0x17, 0xae, 0x41, 0x66, 0x42, 0xe0,
+-      0x65, 0xf2, 0x01, 0x17, 0xc9, 0xe8, 0x50, 0x27, 0x3e, 0x23, 0xb5, 0x0a,
+-      0xaa, 0xe3, 0x4f, 0x9f, 0xa5, 0x9c, 0x73, 0x17, 0xe5, 0xd6, 0x89, 0xec,
+-      0x0a, 0x04, 0x3b, 0x64, 0x34, 0x74, 0x38, 0xf1, 0x8d, 0xd2, 0xef, 0xe3,
+-      0x4c, 0x63, 0xe4, 0xe0, 0x0b, 0xf0, 0xf8, 0x5e, 0x9a, 0x64, 0x7a, 0xf0,
+-      0xbd, 0x3a, 0xaa, 0xd7, 0xb6, 0x12, 0x4e, 0x1a, 0x27, 0x1a, 0x7a, 0x3a,
+-      0x22, 0x3d, 0xb7, 0x09, 0xf8, 0x6b, 0xf5, 0x1a, 0x8c, 0xb7, 0xfa, 0xe0,
+-      0x57, 0x53, 0xe2, 0xd5, 0x02, 0xe5, 0x0d, 0xc7, 0x37, 0xc5, 0x5b, 0xb3,
+-      0x3a, 0xf6, 0x96, 0xfb, 0xc5, 0x2f, 0x66, 0x65, 0x90, 0x4e, 0x28, 0x3e,
+-      0x69, 0xc8, 0x10, 0x5d, 0x2e, 0xc2, 0x42, 0x2f, 0xdf, 0x21, 0x70, 0x9d,
+-      0x9a, 0xc4, 0x77, 0x56, 0xb0, 0xcd, 0xdb, 0xb1, 0x2b, 0x98, 0x51, 0x42,
+-      0x49, 0x47, 0xb7, 0x08, 0x52, 0xec, 0x6a, 0xc8, 0xf4, 0x88, 0x06, 0xc2,
+-      0x9e, 0x0b, 0xa7, 0x37, 0x88, 0x05, 0x25, 0xc6, 0x9a, 0xf0, 0x2f, 0x24,
+-      0xd9, 0x2c, 0x2c, 0x7d, 0x20, 0xd9, 0x18, 0xdf, 0xc5, 0xb6, 0x43, 0x39,
+-      0x4a, 0xf6, 0xfd, 0x7a, 0x32, 0x89, 0x5b, 0x3b, 0xd6, 0x20, 0x64, 0xd9,
+-      0xc7, 0xb0, 0xd8, 0x47, 0xf2, 0x4b, 0x5a, 0xfd, 0x07, 0xbf, 0xef, 0xc0,
+-      0x24, 0x5c, 0x7e, 0x1d, 0x21, 0x89, 0x72, 0x43, 0xa9, 0x23, 0x32, 0xf8,
+-      0x96, 0xe8, 0x15, 0xa3, 0x85, 0x80, 0x2f, 0x9d, 0x86, 0xbf, 0x8e, 0x74,
+-      0x9c, 0x26, 0x1d, 0xef, 0x21, 0x1d, 0xef, 0xf9, 0x12, 0x1d, 0xef, 0x24,
+-      0x1d, 0xef, 0x2f, 0xfc, 0x9d, 0xa5, 0x33, 0xa7, 0xae, 0x63, 0x94, 0x72,
+-      0xee, 0x78, 0xab, 0xcd, 0x4f, 0x81, 0x30, 0xea, 0x9e, 0x58, 0xaf, 0x13,
+-      0x1e, 0x9d, 0x62, 0x66, 0x2f, 0x3d, 0xd3, 0x5c, 0xb5, 0x65, 0xbf, 0xef,
+-      0xc9, 0x74, 0xb7, 0x78, 0xd2, 0xf2, 0x2b, 0xc6, 0x8d, 0x49, 0x34, 0xaa,
+-      0x3d, 0x34, 0x17, 0xdb, 0xca, 0x9d, 0x02, 0x4f, 0xb1, 0xbd, 0x7c, 0x93,
+-      0x04, 0xcf, 0x36, 0x93, 0x12, 0x28, 0xb2, 0xdd, 0xf4, 0xd3, 0x6f, 0xb6,
+-      0x9d, 0x0d, 0xa2, 0xb1, 0xf8, 0x45, 0xfb, 0x81, 0xdf, 0xa9, 0xb3, 0xfd,
+-      0xb0, 0x1d, 0x0d, 0x0b, 0x67, 0x91, 0x7c, 0x96, 0xe6, 0x1f, 0x21, 0xba,
+-      0x77, 0xa6, 0xf7, 0x3b, 0x99, 0x36, 0x59, 0x67, 0x3b, 0x62, 0xfb, 0xb9,
+-      0x48, 0xb4, 0xb2, 0xcd, 0x5f, 0xed, 0xd9, 0xd0, 0xdf, 0xef, 0x4a, 0x50,
+-      0xb7, 0x38, 0x6d, 0x1e, 0x38, 0x87, 0x73, 0xce, 0xe6, 0x78, 0xea, 0xb7,
+-      0x6a, 0xba, 0x63, 0x57, 0x73, 0x39, 0xe7, 0x75, 0xc8, 0x0b, 0xf4, 0x80,
+-      0xfe, 0x9d, 0xd6, 0x2b, 0x34, 0xdf, 0x10, 0xb4, 0x15, 0x90, 0x03, 0xfa,
+-      0xa4, 0x3e, 0xd9, 0x4a, 0xf1, 0x96, 0xe6, 0x94, 0x33, 0x80, 0x9a, 0x11,
+-      0xd8, 0x99, 0x10, 0x84, 0x47, 0x17, 0x91, 0xbf, 0xc1, 0xf0, 0xe8, 0x4a,
+-      0x4f, 0x92, 0xee, 0x2d, 0x25, 0x7c, 0xbe, 0x58, 0xdf, 0x06, 0x33, 0x0b,
+-      0xb9, 0x41, 0x1f, 0xc4, 0x27, 0xa3, 0x61, 0xff, 0x79, 0x28, 0xa9, 0xb3,
+-      0x92, 0x52, 0xa1, 0x3c, 0x35, 0x34, 0x22, 0x94, 0xc1, 0xcb, 0x42, 0x49,
+-      0x96, 0xac, 0x1e, 0xcf, 0x36, 0xb4, 0x5b, 0x58, 0x7c, 0x10, 0xd1, 0x02,
+-      0x70, 0x1b, 0x01, 0xbc, 0x7b, 0x6e, 0x26, 0x9b, 0xd4, 0x3e, 0xe2, 0xd8,
+-      0x9e, 0x3c, 0x43, 0x54, 0x2f, 0xce, 0x70, 0xcf, 0x68, 0x5b, 0xb5, 0x67,
+-      0x34, 0x68, 0xf5, 0x8c, 0xce, 0x4b, 0x4a, 0x62, 0xbe, 0x67, 0x74, 0x05,
+-      0x3c, 0x97, 0xd2, 0xef, 0xad, 0xce, 0xb7, 0xb4, 0x3a, 0x5f, 0x5b, 0x01,
+-      0x22, 0x9a, 0x31, 0xcc, 0x1a, 0xd5, 0x43, 0xfc, 0x26, 0x1d, 0xae, 0x88,
+-      0xda, 0x73, 0x18, 0x21, 0x44, 0xa9, 0xde, 0xbd, 0x9e, 0xf2, 0xa0, 0x3b,
+-      0xb3, 0x03, 0x33, 0x9a, 0xd2, 0x37, 0x00, 0xb6, 0x9d, 0x6e, 0xec, 0xa3,
+-      0x18, 0xba, 0xb7, 0xcc, 0xf5, 0xc8, 0xb0, 0x38, 0xcb, 0x76, 0xe3, 0xb4,
+-      0xa5, 0x66, 0xaf, 0xff, 0x70, 0x75, 0xfd, 0x21, 0x6b, 0xfd, 0x0b, 0x92,
+-      0xd2, 0x5f, 0x5d, 0x5f, 0xfb, 0x33, 0xa1, 0xa4, 0x68, 0xfd, 0x9e, 0x3d,
+-      0xb4, 0xbe, 0x4b, 0xe5, 0xb5, 0x1f, 0xe6, 0xb5, 0xe9, 0x73, 0x08, 0xd7,
+-      0x93, 0xdd, 0xbc, 0x57, 0x90, 0xc5, 0xbb, 0xb9, 0x35, 0xd8, 0x35, 0xb3,
+-      0x06, 0x3b, 0xc9, 0xdf, 0xb6, 0x6a, 0x0d, 0x54, 0xa7, 0xa1, 0xde, 0xa7,
+-      0xe2, 0xb2, 0x23, 0x22, 0xa4, 0xf5, 0xed, 0x2d, 0x84, 0x41, 0x4e, 0x34,
+-      0xcb, 0xf8, 0xd4, 0x1c, 0x50, 0xd7, 0xf4, 0x39, 0x91, 0xfc, 0x7d, 0x0f,
+-      0xfe, 0x5c, 0x22, 0xff, 0x7d, 0x67, 0x81, 0x40, 0xd2, 0x63, 0xd5, 0x1c,
+-      0x09, 0xe1, 0x29, 0xfe, 0xd8, 0x69, 0xdb, 0x7b, 0x2b, 0x7c, 0x8d, 0x68,
+-      0x68, 0x50, 0x6f, 0x40, 0x43, 0xa3, 0x6c, 0x38, 0xa8, 0x8e, 0x59, 0x4f,
+-      0x21, 0xd1, 0xcc, 0xf5, 0x51, 0x3c, 0x35, 0x71, 0x65, 0xf9, 0xdf, 0x9b,
+-      0x89, 0xeb, 0xf8, 0x39, 0x02, 0x15, 0x56, 0x4c, 0xfc, 0xb2, 0x39, 0xe2,
+-      0xe4, 0xbf, 0x6d, 0x54, 0x97, 0xd6, 0x51, 0xf0, 0xed, 0xc1, 0x9e, 0xac,
+-      0x92, 0xda, 0x43, 0x75, 0xe5, 0xfe, 0x48, 0x5b, 0xcf, 0x26, 0x51, 0x83,
+-      0xd0, 0xc2, 0xf0, 0xe0, 0x00, 0x92, 0xcd, 0xf5, 0x55, 0x3a, 0x1e, 0x46,
+-      0xb3, 0x8b, 0x9e, 0xe3, 0x79, 0xae, 0xb1, 0xa7, 0x22, 0xd9, 0x13, 0xdf,
+-      0xe7, 0xef, 0x57, 0xef, 0xcb, 0xbf, 0xa3, 0x4f, 0xae, 0xfa, 0xaf, 0x4b,
+-      0xbf, 0xec, 0xfa, 0xb1, 0x2f, 0xb9, 0xfe, 0x6f, 0xd5, 0xe7, 0x95, 0x46,
+-      0xa7, 0x95, 0xfb, 0x93, 0x0e, 0xee, 0x4b, 0x3a, 0xf5, 0x42, 0xd7, 0x2e,
+-      0xf5, 0x3f, 0x51, 0xcc, 0xe2, 0x7e, 0x04, 0xe7, 0xdb, 0x33, 0x56, 0x3f,
+-      0xe2, 0xf8, 0x6f, 0x61, 0x4f, 0x8e, 0x1d, 0x6e, 0x51, 0x37, 0x6e, 0x98,
+-      0x4d, 0xea, 0x1f, 0x51, 0x7d, 0xb2, 0x03, 0x03, 0x31, 0x0d, 0x63, 0x59,
+-      0xa5, 0xef, 0x0e, 0xa8, 0xc9, 0x3b, 0x05, 0x4d, 0x54, 0x72, 0x0b, 0x69,
+-      0xbc, 0x7a, 0x4f, 0x33, 0xa8, 0xe6, 0xaa, 0xa0, 0x96, 0x62, 0x8f, 0x53,
+-      0xf5, 0xcb, 0x28, 0x05, 0x64, 0x67, 0x29, 0x28, 0xd7, 0x94, 0x5a, 0xe4,
+-      0x5a, 0x1a, 0xe7, 0x1d, 0x57, 0x2e, 0xdf, 0x81, 0x1d, 0xb8, 0xbc, 0xdc,
+-      0x63, 0x34, 0xeb, 0x8a, 0xbf, 0x59, 0xda, 0x81, 0x5d, 0x31, 0x7e, 0xb6,
+-      0x9b, 0x6a, 0x2f, 0x88, 0xc6, 0x0c, 0x21, 0x5c, 0x5d, 0x60, 0x37, 0xd5,
+-      0x97, 0x4b, 0x1c, 0x6a, 0xcf, 0xaf, 0x85, 0x53, 0x76, 0x97, 0x20, 0x7c,
+-      0x19, 0x07, 0x0e, 0x76, 0xc2, 0xed, 0x5e, 0xa1, 0x0c, 0x9e, 0x10, 0xc3,
+-      0x78, 0x36, 0x16, 0xe9, 0xdb, 0x2c, 0x42, 0xb2, 0x87, 0xee, 0xb9, 0x32,
+-      0x10, 0x72, 0xc6, 0x70, 0xbb, 0x56, 0x28, 0x41, 0x87, 0x48, 0x62, 0x40,
+-      0x55, 0xb5, 0x71, 0xc8, 0xb4, 0x26, 0x44, 0x6d, 0x46, 0xb9, 0x7c, 0x96,
+-      0xb0, 0xd1, 0x95, 0xa5, 0xc3, 0xe8, 0x58, 0x1e, 0xd9, 0xdb, 0xef, 0x50,
+-      0x65, 0xc2, 0x6c, 0xc2, 0x99, 0xf1, 0xe2, 0xa6, 0x03, 0xf3, 0xfd, 0x19,
+-      0xd3, 0xfc, 0x38, 0x56, 0xb9, 0x97, 0x44, 0x28, 0xd7, 0x97, 0xa2, 0xb2,
+-      0x97, 0xf0, 0x79, 0xdb, 0x01, 0xc6, 0x4b, 0x9c, 0x0f, 0x2a, 0x64, 0x37,
+-      0xed, 0xc4, 0x63, 0x1f, 0x66, 0xd2, 0x8c, 0x9f, 0x74, 0x4c, 0x53, 0x6d,
+-      0xa3, 0x8e, 0xb6, 0x50, 0xae, 0x4f, 0x60, 0x2e, 0xcd, 0x7d, 0x9c, 0x41,
+-      0x92, 0x71, 0x3f, 0xd1, 0xbf, 0x81, 0xea, 0xda, 0x14, 0xc5, 0x2b, 0x96,
+-      0xf1, 0x00, 0xf7, 0x6b, 0xa9, 0x96, 0xfe, 0x79, 0xd7, 0xd7, 0xc6, 0x20,
+-      0xbb, 0xf5, 0xd7, 0xba, 0xae, 0x3f, 0x80, 0x46, 0xca, 0xe7, 0x3a, 0x55,
+-      0x2e, 0x88, 0x46, 0x22, 0xda, 0x79, 0x44, 0x82, 0x2f, 0x93, 0x3e, 0x46,
+-      0x54, 0x60, 0xa7, 0x55, 0x33, 0x3b, 0x61, 0x14, 0xd8, 0xa6, 0xe0, 0xae,
+-      0xed, 0x6c, 0xc4, 0xfb, 0xb9, 0xa8, 0xd5, 0x0b, 0x32, 0xa8, 0x8e, 0x79,
+-      0x49, 0x53, 0x52, 0x79, 0x7a, 0x6e, 0xa3, 0xff, 0x7f, 0xed, 0xa9, 0x8b,
+-      0x43, 0xae, 0x53, 0xd9, 0xbf, 0xfe, 0xdc, 0x73, 0x96, 0x6c, 0xf4, 0xae,
+-      0xc9, 0xbf, 0xf0, 0x7c, 0x12, 0xcf, 0x7b, 0x3e, 0x8a, 0x9b, 0x66, 0x82,
+-      0x70, 0x65, 0x3f, 0xd5, 0xcd, 0x1f, 0x8f, 0x1a, 0x9e, 0xf3, 0x71, 0xee,
+-      0xe9, 0x3a, 0xf1, 0x07, 0xf4, 0xfb, 0xe9, 0x51, 0x19, 0xb7, 0x16, 0x9b,
+-      0xe1, 0x1a, 0x93, 0xc8, 0x3f, 0xd7, 0x52, 0xae, 0x72, 0xe0, 0x9e, 0xe8,
+-      0x51, 0x54, 0x02, 0x0e, 0x1a, 0xb3, 0x9f, 0x7e, 0x73, 0x6f, 0xea, 0x71,
+-      0x6c, 0xf6, 0xcf, 0x7a, 0xde, 0x8f, 0x33, 0xbd, 0x15, 0xa6, 0x97, 0x72,
+-      0xe4, 0xed, 0xd8, 0x78, 0x07, 0x0c, 0x9f, 0x6e, 0xfd, 0xbb, 0x5f, 0xee,
+-      0x6c, 0xc2, 0xe1, 0x5c, 0x33, 0x5e, 0xcc, 0x19, 0xee, 0x9f, 0x76, 0x46,
+-      0x31, 0x38, 0x6a, 0xe2, 0x15, 0xcd, 0x18, 0xae, 0x25, 0x3b, 0x4f, 0x50,
+-      0xad, 0x14, 0x5e, 0xae, 0xf8, 0x2f, 0x0b, 0x44, 0x24, 0x44, 0x86, 0x08,
+-      0x2c, 0xde, 0x4d, 0xa1, 0x2b, 0x55, 0xaf, 0x47, 0xb4, 0xd7, 0x85, 0x59,
+-      0x73, 0x6f, 0xa7, 0x93, 0x68, 0x00, 0xd6, 0x51, 0x4c, 0x9e, 0x4b, 0x47,
+-      0x71, 0x6b, 0x44, 0xc6, 0xfa, 0xa2, 0x86, 0x17, 0xd3, 0x5e, 0xdc, 0x55,
+-      0x8c, 0x13, 0x86, 0xf6, 0x13, 0xed, 0x09, 0x94, 0xd3, 0x01, 0x7c, 0xbd,
+-      0xd8, 0x42, 0xf2, 0x0e, 0x62, 0x6d, 0x91, 0x31, 0x16, 0xe7, 0x67, 0xdd,
+-      0xbd, 0x31, 0xde, 0x82, 0x1e, 0x8a, 0xdf, 0xb3, 0x69, 0xb8, 0xb7, 0xc7,
+-      0x43, 0xe8, 0x2e, 0x46, 0x51, 0x24, 0x2c, 0x76, 0x3b, 0xcd, 0x79, 0x17,
+-      0xe9, 0xa4, 0x9d, 0xea, 0xfb, 0x25, 0x11, 0x42, 0xa8, 0x45, 0xaf, 0x18,
+-      0x26, 0xcc, 0x94, 0x28, 0x36, 0xe1, 0xfc, 0x18, 0xdb, 0xf9, 0x5b, 0x5d,
+-      0xbb, 0x72, 0x7e, 0x84, 0x8a, 0xb8, 0x49, 0x06, 0xb6, 0x51, 0x95, 0x97,
+-      0x2a, 0x12, 0xbd, 0xfb, 0x3a, 0xed, 0x7e, 0xec, 0x0d, 0xc5, 0xcf, 0xf9,
+-      0x6d, 0x20, 0x3d, 0x7d, 0x72, 0x60, 0xd6, 0x73, 0x85, 0x64, 0xe0, 0xd3,
+-      0x7f, 0xd4, 0xf5, 0xc6, 0x01, 0x20, 0x3a, 0xc5, 0xbc, 0x71, 0x7c, 0x0d,
+-      0x27, 0x28, 0xbe, 0xb6, 0xcb, 0xf8, 0xb5, 0x49, 0xb5, 0x64, 0x68, 0x86,
+-      0x7b, 0xff, 0xaa, 0x97, 0xe8, 0xf0, 0x23, 0x49, 0x6b, 0xdf, 0x56, 0xfc,
+-      0xa1, 0xb9, 0x71, 0x61, 0x10, 0x5f, 0x8b, 0xd8, 0xb2, 0x7a, 0x9d, 0x74,
+-      0x38, 0x3d, 0xd6, 0x8c, 0xb9, 0x31, 0xee, 0xad, 0x9c, 0xea, 0x3a, 0x34,
+-      0x69, 0x62, 0x9d, 0x66, 0x78, 0x7e, 0xda, 0x79, 0x03, 0x1e, 0x38, 0x30,
+-      0x72, 0xba, 0x86, 0xf4, 0x7a, 0x59, 0xbb, 0x1b, 0x8f, 0x4e, 0xe1, 0xab,
+-      0xcd, 0xc0, 0x23, 0x41, 0x70, 0xff, 0x59, 0x09, 0x1d, 0x41, 0xa4, 0x67,
+-      0x3b, 0x22, 0x7e, 0x55, 0x28, 0xda, 0x2b, 0x14, 0xab, 0xea, 0x08, 0x3b,
+-      0xdc, 0x46, 0xb5, 0x7c, 0x0d, 0x79, 0xf0, 0x5d, 0x45, 0x27, 0xc9, 0x28,
+-      0x88, 0xf2, 0x58, 0x0d, 0x24, 0xf2, 0x93, 0x0b, 0x2a, 0xd6, 0x35, 0x90,
+-      0xac, 0x25, 0x21, 0x93, 0x9e, 0xdb, 0x71, 0x68, 0x74, 0x5e, 0x56, 0x5e,
+-      0xdc, 0x42, 0x32, 0x7c, 0x76, 0xd4, 0xdc, 0xa1, 0xc6, 0x02, 0x24, 0x6b,
+-      0x3f, 0xd1, 0x37, 0x2f, 0x27, 0x96, 0xdf, 0xbc, 0x9c, 0xee, 0xc6, 0xae,
+-      0x39, 0x96, 0xdb, 0xbf, 0x47, 0x5e, 0xb3, 0x96, 0xdd, 0xad, 0x9b, 0x8c,
+-      0xa2, 0xf9, 0xc0, 0x55, 0xd9, 0x31, 0x7d, 0x8f, 0x10, 0x1f, 0xdf, 0xf3,
+-      0xad, 0x8c, 0x0c, 0x5e, 0x14, 0x5e, 0xa2, 0xc7, 0x4f, 0xba, 0x39, 0xeb,
+-      0x62, 0x0c, 0x4e, 0x32, 0xb9, 0x2a, 0xe3, 0x20, 0xc9, 0x38, 0x38, 0xc5,
+-      0xb2, 0xfe, 0x11, 0xc9, 0x1a, 0x78, 0x83, 0x70, 0xd7, 0xcd, 0xb1, 0x28,
+-      0xea, 0x0f, 0x28, 0xc9, 0x66, 0x29, 0x9c, 0x68, 0x10, 0xa0, 0xea, 0x02,
+-      0xed, 0xf5, 0xf8, 0x98, 0xe5, 0xac, 0x91, 0x9c, 0xbf, 0x37, 0x42, 0xfc,
+-      0xac, 0xa1, 0xf9, 0xd6, 0x91, 0x9c, 0x93, 0xc4, 0xff, 0x6d, 0xd6, 0xbc,
+-      0x2d, 0x34, 0xef, 0x06, 0xaa, 0x21, 0x66, 0x3d, 0x17, 0x88, 0x9e, 0xe8,
+-      0xe7, 0xb4, 0x10, 0xca, 0x8e, 0x04, 0x2f, 0x52, 0xad, 0xbc, 0xd6, 0x1a,
+-      0xe7, 0xa7, 0x71, 0x4c, 0xfb, 0x5b, 0xb5, 0x0e, 0xf5, 0xcb, 0x7a, 0xc7,
+-      0x77, 0x83, 0x7b, 0x07, 0x06, 0xfa, 0xb1, 0x37, 0xbb, 0x81, 0x6a, 0x1e,
+-      0x99, 0x30, 0xa4, 0x81, 0xef, 0xc7, 0x95, 0x68, 0xa3, 0xe0, 0xf8, 0x67,
+-      0x90, 0x1f, 0x56, 0xa8, 0xde, 0x09, 0x87, 0xe6, 0x10, 0x94, 0x1d, 0x25,
+-      0x99, 0xf0, 0x5e, 0x8b, 0x2c, 0x95, 0xc8, 0x5f, 0x83, 0xfd, 0x84, 0x93,
+-      0x9d, 0x78, 0xb9, 0xe0, 0xc4, 0xab, 0xe9, 0x0d, 0x94, 0xe7, 0xdc, 0x84,
+-      0x87, 0x0d, 0xb7, 0x73, 0xc5, 0x81, 0x1a, 0x3b, 0x26, 0x2f, 0x45, 0xef,
+-      0xf8, 0xc3, 0xa8, 0xcb, 0x38, 0xfb, 0x28, 0x47, 0x6b, 0xb7, 0x91, 0x5c,
+-      0xd6, 0x95, 0xf8, 0x7e, 0x0b, 0x32, 0xe9, 0x14, 0xb2, 0xd9, 0x30, 0xd5,
+-      0x32, 0x4e, 0xe4, 0x9b, 0x5b, 0xac, 0xfe, 0x6c, 0x8e, 0xae, 0xe5, 0xca,
+-      0x5f, 0xec, 0x1b, 0x7f, 0xab, 0xda, 0x2f, 0x1e, 0xa4, 0x9c, 0xd2, 0x4f,
+-      0xd8, 0x73, 0x03, 0xc5, 0x77, 0x9b, 0xc6, 0xd9, 0x78, 0x1f, 0xf6, 0x14,
+-      0xf4, 0xab, 0xf1, 0x63, 0xba, 0x60, 0xf7, 0x05, 0xb7, 0x90, 0x3c, 0xce,
+-      0xa5, 0x4d, 0x3c, 0xaa, 0xb1, 0x3e, 0x29, 0x2e, 0xa5, 0xb9, 0x37, 0x68,
+-      0xe2, 0x19, 0x4d, 0x70, 0xbc, 0xa1, 0x3c, 0xba, 0x01, 0x4b, 0x0a, 0x26,
+-      0x4e, 0x6b, 0x2a, 0xc5, 0x2e, 0x18, 0x6e, 0xc2, 0x7e, 0x91, 0xd1, 0x7f,
+-      0x31, 0xf3, 0xce, 0x21, 0xb4, 0x75, 0x02, 0x9b, 0x47, 0x25, 0xcc, 0xcd,
+-      0x5c, 0xcd, 0xd1, 0x78, 0xf1, 0xf3, 0x3c, 0x9d, 0x98, 0x81, 0xb9, 0xc3,
+-      0xa9, 0x2b, 0xc3, 0xbc, 0xd7, 0x32, 0x12, 0x57, 0x12, 0xb5, 0x56, 0xce,
+-      0x56, 0xfb, 0x97, 0x48, 0x8a, 0x56, 0x12, 0x6d, 0xa9, 0x4f, 0x50, 0x59,
+-      0x2f, 0x43, 0x09, 0xfe, 0x0c, 0x91, 0xe8, 0x20, 0xef, 0x29, 0x94, 0xed,
+-      0xfc, 0xbd, 0xb4, 0x9a, 0xbf, 0xc3, 0x05, 0x8f, 0x50, 0xc7, 0x1c, 0xc8,
+-      0xcf, 0x98, 0x94, 0x67, 0x05, 0x66, 0x49, 0xc1, 0x2f, 0x64, 0x77, 0xe0,
+-      0xeb, 0x31, 0xd3, 0xbc, 0x2b, 0xae, 0x0e, 0x36, 0x4b, 0xf8, 0xd3, 0x06,
+-      0xc2, 0x14, 0x64, 0xf7, 0x84, 0x01, 0x10, 0xda, 0xda, 0x69, 0x98, 0x32,
+-      0xd5, 0x0c, 0x35, 0x3a, 0xf7, 0x1a, 0x7b, 0x45, 0x7b, 0x71, 0x83, 0xb8,
+-      0xa1, 0xd8, 0x2f, 0x42, 0x87, 0xee, 0x14, 0xd1, 0xa7, 0x6c, 0xdc, 0xd6,
+-      0x5a, 0xfc, 0xbc, 0x1f, 0xda, 0x43, 0x7c, 0xef, 0xd3, 0x4c, 0x3c, 0x4d,
+-      0xbc, 0xed, 0x2d, 0xdb, 0xb5, 0xc8, 0xee, 0xb4, 0xcd, 0xdb, 0xa3, 0x74,
+-      0xff, 0x62, 0x9a, 0xfd, 0xf1, 0x61, 0xab, 0xd7, 0xd9, 0x4c, 0xcf, 0xdc,
+-      0x9c, 0x0d, 0x87, 0x06, 0x85, 0x32, 0x34, 0x0b, 0xee, 0x77, 0xb6, 0x55,
+-      0x4e, 0x0a, 0xca, 0x3d, 0x12, 0xc7, 0x57, 0xf6, 0x79, 0x9b, 0xf6, 0x65,
+-      0x05, 0x58, 0x71, 0x91, 0xe9, 0xbf, 0x91, 0xea, 0xbe, 0x9f, 0xa5, 0xdb,
+-      0xfa, 0xdd, 0x24, 0xb6, 0xf3, 0xf1, 0x6e, 0x71, 0x89, 0xea, 0xbe, 0x57,
+-      0xd3, 0xc9, 0x85, 0x75, 0xe8, 0x11, 0x17, 0x0a, 0x7d, 0xe2, 0xc3, 0x7c,
+-      0x2f, 0x9c, 0x63, 0xf7, 0x8b, 0x77, 0xf3, 0x4c, 0x5b, 0xbf, 0x38, 0x33,
+-      0x7b, 0xde, 0x92, 0xfd, 0x2e, 0x8d, 0xfb, 0x9a, 0xf5, 0xb5, 0xf0, 0x99,
+-      0x04, 0x4f, 0x59, 0x8f, 0xdc, 0xe7, 0xb3, 0xfb, 0x43, 0xeb, 0xe2, 0x39,
+-      0xd3, 0xa9, 0x72, 0xaf, 0x37, 0x68, 0xf1, 0x38, 0x43, 0x78, 0x79, 0x36,
+-      0xbf, 0x41, 0x1c, 0x2e, 0xd8, 0xfc, 0x4d, 0x17, 0xd8, 0x6e, 0x65, 0xca,
+-      0x0d, 0x5f, 0xcc, 0xcf, 0x06, 0xfc, 0x9d, 0x41, 0xd4, 0x58, 0xfd, 0x24,
+-      0x13, 0xe3, 0x5a, 0x24, 0xf4, 0x0a, 0x82, 0x70, 0x96, 0xd8, 0xa6, 0x4d,
+-      0x3c, 0xa7, 0xb9, 0x20, 0x8d, 0xcb, 0x24, 0x17, 0xb2, 0x21, 0x9f, 0x0b,
+-      0x8e, 0x69, 0xae, 0x01, 0xe2, 0xb5, 0xdc, 0x67, 0x08, 0x39, 0xf8, 0xfb,
+-      0x17, 0x6d, 0xcd, 0x45, 0x79, 0x80, 0xfb, 0xe3, 0x6f, 0xd6, 0xd8, 0x36,
+-      0xc7, 0xf9, 0x68, 0xbe, 0xa7, 0x4d, 0x39, 0xb6, 0x93, 0x7b, 0xd9, 0x6e,
+-      0xcc, 0xe5, 0x6a, 0xb8, 0xc5, 0xe0, 0xae, 0xe9, 0x34, 0x71, 0x4e, 0x73,
+-      0x52, 0x5d, 0xf2, 0x10, 0xe5, 0x26, 0x07, 0x64, 0xf5, 0x6e, 0x94, 0x26,
+-      0x9d, 0x0e, 0xde, 0x73, 0xfa, 0x59, 0x8c, 0x7b, 0x00, 0xc0, 0x7e, 0xe2,
+-      0xe1, 0x99, 0x5c, 0x88, 0xea, 0x7f, 0xb9, 0x5a, 0x43, 0xfc, 0x01, 0x8e,
+-      0xe7, 0x24, 0xd1, 0xac, 0x43, 0x4a, 0xac, 0x34, 0xf1, 0xc9, 0xf2, 0x48,
+-      0xf4, 0x32, 0xc5, 0x2f, 0x3f, 0xe5, 0xaa, 0xdd, 0x85, 0x46, 0xfc, 0x2c,
+-      0xd7, 0x88, 0x57, 0x73, 0xa4, 0xc3, 0xd8, 0x48, 0xbf, 0x87, 0x62, 0xe4,
+-      0xd2, 0x98, 0x0b, 0x5b, 0x23, 0x86, 0xdf, 0x83, 0x28, 0xce, 0x25, 0xae,
+-      0x47, 0x2a, 0x10, 0xee, 0x19, 0x41, 0x13, 0xde, 0xcc, 0x81, 0x30, 0x04,
+-      0xdc, 0x4b, 0x68, 0x8e, 0xf7, 0x62, 0xc6, 0x90, 0x0b, 0x0a, 0xd5, 0x1f,
+-      0x88, 0xd7, 0xc3, 0xac, 0x39, 0x19, 0xa7, 0x1c, 0x5d, 0x6c, 0x44, 0x6f,
+-      0xae, 0x09, 0xfd, 0x94, 0xab, 0x56, 0xaf, 0x8c, 0xe3, 0xdd, 0xac, 0x57,
+-      0xdc, 0x94, 0x1d, 0xe9, 0xf7, 0xd3, 0x9c, 0xae, 0xe5, 0xca, 0xd0, 0xb3,
+-      0x04, 0xd8, 0x64, 0x84, 0xd9, 0xbc, 0xb7, 0xfb, 0x28, 0xde, 0x1e, 0x16,
+-      0x9f, 0xe1, 0x49, 0xb2, 0xc1, 0x2d, 0x9a, 0x52, 0xb9, 0x20, 0x45, 0x4e,
+-      0xaf, 0x87, 0x32, 0x7c, 0x9b, 0x30, 0xa2, 0x0d, 0x14, 0x47, 0x9a, 0xed,
+-      0x18, 0x61, 0x44, 0x84, 0x4c, 0x98, 0xdc, 0x09, 0xb7, 0x6a, 0xa0, 0xa7,
+-      0x93, 0x65, 0xea, 0x86, 0xfb, 0x29, 0xb2, 0x1b, 0xc7, 0x17, 0xfb, 0xf3,
+-      0x8d, 0x78, 0x83, 0xf2, 0xe4, 0xeb, 0x39, 0xc8, 0xb5, 0x14, 0xfb, 0x3f,
+-      0xa0, 0xd8, 0x7f, 0x2a, 0x36, 0x12, 0xe2, 0x98, 0x5f, 0x88, 0xe1, 0x5b,
+-      0x04, 0x83, 0x5b, 0xbc, 0xb4, 0xe6, 0x26, 0xc1, 0xeb, 0x20, 0xb9, 0x58,
+-      0xe7, 0xbe, 0x9a, 0xc5, 0x0f, 0xc5, 0x61, 0xe6, 0xe9, 0xff, 0x27, 0xed,
+-      0xdb, 0x6b, 0xe1, 0x69, 0x22, 0x5d, 0xce, 0xf7, 0x24, 0xaf, 0xed, 0x47,
+-      0x72, 0x1d, 0x63, 0xe3, 0xc2, 0x1a, 0xbd, 0x4e, 0xbc, 0x94, 0x63, 0x9b,
+-      0x33, 0xf1, 0xbc, 0xa6, 0x51, 0xcd, 0xc2, 0xb5, 0xf6, 0x10, 0xd5, 0x2d,
+-      0xdc, 0x27, 0x32, 0xdc, 0x27, 0x89, 0xc2, 0xbd, 0x39, 0xfc, 0x9e, 0x0c,
+-      0x69, 0x59, 0x2d, 0xa6, 0x90, 0x77, 0x3a, 0x09, 0x6b, 0x70, 0x8c, 0x65,
+-      0x3f, 0x7a, 0xab, 0x4b, 0xcd, 0xc3, 0xf0, 0xea, 0x3d, 0x30, 0x2c, 0xdf,
+-      0xad, 0x13, 0x0f, 0x90, 0x8d, 0xbc, 0x1c, 0xab, 0x45, 0x9e, 0xea, 0x1e,
+-      0xc2, 0xdf, 0xee, 0x3f, 0xa3, 0xe7, 0x13, 0x13, 0xd8, 0x13, 0x84, 0xf4,
+-      0x5d, 0x3f, 0xfe, 0x02, 0x67, 0x5d, 0x8c, 0xcb, 0xe1, 0xee, 0x8b, 0x1b,
+-      0x9e, 0xf5, 0xf1, 0x3a, 0x71, 0x7b, 0xae, 0x1d, 0x17, 0x27, 0x1b, 0xc9,
+-      0xbe, 0x9b, 0xb0, 0x78, 0x3c, 0x88, 0xf7, 0x88, 0x96, 0x61, 0x8d, 0xb1,
+-      0xba, 0x31, 0xdc, 0x0c, 0x65, 0x88, 0xea, 0xa1, 0xbe, 0x9f, 0x0b, 0xf6,
+-      0x01, 0xa5, 0xe7, 0x0e, 0xe1, 0x81, 0x1a, 0x49, 0x92, 0xec, 0x4d, 0x73,
+-      0x4c, 0x6b, 0xd3, 0xbc, 0xe0, 0xfe, 0xcf, 0xdd, 0xd8, 0x3f, 0xc7, 0xb4,
+-      0x9c, 0xea, 0xba, 0x61, 0x96, 0x3f, 0x4f, 0x77, 0x5d, 0x6f, 0x7d, 0xbe,
+-      0x56, 0xfd, 0xac, 0x74, 0x85, 0xac, 0xcf, 0x1f, 0xd1, 0x27, 0xf7, 0x99,
+-      0xc3, 0x46, 0x8d, 0xf8, 0xbe, 0x8b, 0xfb, 0xcd, 0x49, 0xf0, 0xff, 0x71,
+-      0x97, 0xdd, 0xaf, 0xbb, 0x1b, 0x86, 0xd5, 0x13, 0xf9, 0xb5, 0xd5, 0x8b,
+-      0x0e, 0x91, 0x1b, 0xc8, 0xc4, 0x9f, 0x4c, 0x58, 0x2b, 0x10, 0xa3, 0xc2,
+-      0xbc, 0x49, 0x36, 0x16, 0xeb, 0xfd, 0x54, 0x1b, 0xc8, 0xc4, 0xaf, 0x81,
+-      0x3d, 0x9d, 0x02, 0xfb, 0x55, 0x1d, 0x3f, 0x2d, 0x70, 0x0c, 0x77, 0xe2,
+-      0x99, 0xb4, 0x12, 0x4a, 0x89, 0x30, 0xd5, 0xf9, 0x0e, 0x84, 0x9a, 0xfb,
+-      0xb1, 0x9f, 0xf2, 0xc9, 0x6c, 0x9a, 0xf3, 0x07, 0x7d, 0x52, 0x3c, 0x6f,
+-      0xa0, 0xf8, 0xf3, 0xf1, 0xa8, 0x1d, 0xef, 0x8b, 0x71, 0x65, 0xef, 0x1f,
+-      0x90, 0x4e, 0x9f, 0x2b, 0xf2, 0x9c, 0x06, 0xae, 0xac, 0x64, 0x1f, 0x56,
+-      0xa2, 0x29, 0xc7, 0x7d, 0x08, 0xcd, 0x70, 0x6c, 0xa1, 0xe5, 0x68, 0xad,
+-      0x83, 0xd9, 0x1a, 0xf4, 0xc5, 0x7b, 0x45, 0x7f, 0xa9, 0x8f, 0xf7, 0x14,
+-      0xfc, 0x0b, 0xf4, 0x3b, 0xc5, 0x9a, 0x69, 0xee, 0x09, 0x6e, 0x10, 0x7d,
+-      0x25, 0xee, 0x0b, 0x0e, 0x8b, 0x6f, 0x94, 0xd8, 0xe7, 0xe7, 0xfb, 0x83,
+-      0xf3, 0xfa, 0xe7, 0xbe, 0xa0, 0xe1, 0x7e, 0x89, 0x64, 0xbf, 0x3d, 0xc7,
+-      0x71, 0x58, 0x7a, 0xc0, 0x87, 0xe5, 0xc8, 0xbb, 0xe0, 0x3e, 0x11, 0xff,
+-      0x1d, 0xdc, 0x45, 0xb8, 0x60, 0xb1, 0x6a, 0xeb, 0x6f, 0x75, 0xde, 0x81,
+-      0xc4, 0x72, 0x12, 0xfa, 0x02, 0xd6, 0xe9, 0x00, 0xc5, 0xb3, 0x8c, 0x39,
+-      0x18, 0x60, 0x5d, 0xb2, 0xbd, 0x59, 0x7d, 0x27, 0xca, 0x2b, 0x06, 0x22,
+-      0x9d, 0x6e, 0xcc, 0xe6, 0x16, 0x51, 0x4d, 0x60, 0x62, 0xaf, 0x56, 0x8f,
+-      0x5a, 0x2b, 0x06, 0xb8, 0x09, 0x47, 0x42, 0xf6, 0xd2, 0x3c, 0xe9, 0x31,
+-      0x19, 0x1e, 0xba, 0x77, 0x92, 0x72, 0xd3, 0xfe, 0x4e, 0x7b, 0xee, 0xb6,
+-      0xfc, 0x4d, 0xd8, 0x47, 0x1e, 0x5f, 0xaf, 0x46, 0x31, 0xea, 0xf7, 0x52,
+-      0xac, 0xf9, 0x56, 0x75, 0xce, 0xcf, 0xc8, 0x36, 0x79, 0xbd, 0x4d, 0xb5,
+-      0xb6, 0x1e, 0x96, 0xc9, 0x76, 0xed, 0x25, 0x1b, 0x75, 0xb4, 0xd6, 0xd6,
+-      0xce, 0x0d, 0xe8, 0x19, 0xf5, 0x8a, 0x57, 0xd3, 0xf7, 0x98, 0xa1, 0x46,
+-      0x1a, 0x47, 0x36, 0x5b, 0x53, 0xa5, 0xb7, 0x35, 0xff, 0xcf, 0xb5, 0x5c,
+-      0xa7, 0x7b, 0x29, 0x8f, 0x3c, 0x98, 0x73, 0x20, 0x50, 0xbd, 0x1e, 0xcf,
+-      0x87, 0xa0, 0x75, 0xd4, 0x01, 0x4d, 0x82, 0xae, 0xf1, 0xdc, 0xbc, 0x86,
+-      0x8c, 0x46, 0xf2, 0x93, 0x6f, 0xc7, 0x13, 0xf8, 0x20, 0xeb, 0xc4, 0x7a,
+-      0xca, 0xef, 0x6b, 0xd3, 0x3a, 0xce, 0x95, 0x6b, 0x79, 0x3d, 0xb2, 0xc3,
+-      0xf9, 0x71, 0x4e, 0x1a, 0xe7, 0xc6, 0x74, 0xfe, 0x8b, 0xf4, 0x05, 0x88,
+-      0xe6, 0x22, 0x8d, 0xe5, 0x7b, 0xe7, 0xad, 0xbe, 0xc0, 0xf1, 0x6b, 0xea,
+-      0x29, 0xc7, 0x38, 0xf7, 0x8a, 0xec, 0x5c, 0xd0, 0xad, 0xb1, 0x2e, 0x7d,
+-      0xb8, 0x3c, 0x61, 0xe0, 0xdc, 0xca, 0x06, 0x5c, 0x99, 0x68, 0xc5, 0x03,
+-      0x39, 0x0f, 0x2e, 0x4c, 0x98, 0xb8, 0x69, 0x39, 0xee, 0x09, 0x12, 0x06,
+-      0x6b, 0x20, 0xbf, 0xff, 0x29, 0xd5, 0x3c, 0x14, 0x4f, 0x89, 0xd2, 0x48,
+-      0x62, 0x1d, 0xd9, 0x75, 0x34, 0x86, 0xd4, 0x2d, 0xf1, 0x48, 0xe8, 0x3c,
+-      0xbe, 0x67, 0x52, 0x2c, 0xf6, 0x4b, 0x7a, 0xaf, 0x70, 0x5a, 0xfb, 0x84,
+-      0x1b, 0xac, 0x7d, 0x45, 0xc7, 0xf4, 0xb0, 0x90, 0x4a, 0xd7, 0xfa, 0xf5,
+-      0x97, 0xe5, 0x21, 0xce, 0x3d, 0x9c, 0x23, 0xc7, 0x4d, 0x97, 0xba, 0xc1,
+-      0xea, 0xd3, 0xec, 0xce, 0x5f, 0xcd, 0x4d, 0x57, 0xf3, 0xd1, 0xce, 0x6a,
+-      0x1e, 0x1a, 0x29, 0xbc, 0xf3, 0x05, 0xfc, 0x14, 0xaa, 0xee, 0x57, 0x70,
+-      0xfe, 0x71, 0x8b, 0xb3, 0x64, 0x0e, 0x7b, 0xc8, 0x07, 0x8f, 0x6a, 0x27,
+-      0x82, 0x94, 0x21, 0xe0, 0xec, 0x10, 0x78, 0x90, 0xcf, 0x8b, 0x04, 0x4c,
+-      0xdc, 0xa9, 0xd9, 0xf6, 0xb0, 0xbc, 0xd3, 0x85, 0x41, 0xca, 0x49, 0xae,
+-      0x98, 0x97, 0x7c, 0xdd, 0x8f, 0xd7, 0x34, 0xb6, 0xe1, 0x5b, 0xaa, 0x39,
+-      0x89, 0xf7, 0xbf, 0xed, 0xbd, 0xea, 0xdf, 0xee, 0x5b, 0xcf, 0xdb, 0xa6,
+-      0x86, 0xe4, 0x42, 0x78, 0xde, 0x8b, 0xab, 0x54, 0x37, 0xc8, 0x54, 0x33,
+-      0xac, 0x47, 0x62, 0x81, 0x92, 0x64, 0xfd, 0xfb, 0x68, 0xee, 0x5f, 0x76,
+-      0x0e, 0xe2, 0xfe, 0x71, 0x07, 0xea, 0x54, 0x8e, 0xb3, 0x06, 0xf6, 0x37,
+-      0x72, 0x9c, 0xea, 0xc5, 0x8e, 0x71, 0xb7, 0x38, 0x99, 0x73, 0xe2, 0xc9,
+-      0xbe, 0x47, 0xb0, 0xa0, 0x63, 0x4b, 0xb5, 0xd7, 0xc9, 0xdf, 0xbf, 0x89,
+-      0xd4, 0x22, 0x5e, 0x9f, 0x7b, 0x68, 0x02, 0xde, 0x0e, 0xe6, 0x03, 0x9e,
+-      0x8b, 0x34, 0xff, 0xe6, 0x51, 0xa7, 0x38, 0x9f, 0xfe, 0x1b, 0xf3, 0x48,
+-      0x80, 0x71, 0x01, 0xdf, 0xab, 0x87, 0xd1, 0xc8, 0x63, 0x59, 0x87, 0x5e,
+-      0xaa, 0x49, 0x07, 0x31, 0x4a, 0x74, 0xbd, 0x6e, 0xcd, 0x75, 0xb6, 0x4a,
+-      0xbf, 0x57, 0x34, 0x64, 0x64, 0x23, 0x48, 0xb4, 0xf8, 0x57, 0xf6, 0xa1,
+-      0xa1, 0x74, 0x6d, 0xbe, 0x25, 0xa3, 0xf7, 0x30, 0x7f, 0x9c, 0x13, 0x06,
+-      0xf0, 0x41, 0x5a, 0xe0, 0x7d, 0xcb, 0x06, 0x07, 0xd0, 0x5a, 0xa0, 0xfa,
+-      0xdf, 0x8a, 0x21, 0x3c, 0x2e, 0x6e, 0xdb, 0xb6, 0x63, 0x10, 0xdb, 0x89,
+-      0x97, 0x7a, 0xe2, 0xe5, 0xe3, 0xd8, 0x12, 0x5a, 0x87, 0xaf, 0x1d, 0x93,
+-      0xab, 0xfd, 0x87, 0xea, 0x5c, 0xab, 0xc0, 0xbd, 0x29, 0xa7, 0x1a, 0xc1,
+-      0xb6, 0xf1, 0x48, 0xbf, 0xd7, 0xc1, 0x76, 0x18, 0xc1, 0x7d, 0xd3, 0x49,
+-      0xba, 0xcf, 0x73, 0x05, 0xb1, 0x29, 0xe3, 0x14, 0xef, 0x52, 0x9d, 0x74,
+-      0x3c, 0xed, 0x58, 0x24, 0xe1, 0x07, 0xe6, 0x93, 0x81, 0x1d, 0xb8, 0x45,
+-      0xeb, 0xc5, 0xbd, 0x64, 0x83, 0xdd, 0xad, 0x3b, 0x30, 0x41, 0x36, 0xb0,
+-      0xb9, 0x89, 0x6a, 0xb7, 0x58, 0xd9, 0x1c, 0x08, 0xb0, 0x1c, 0x05, 0x7a,
+-      0xe8, 0x7a, 0x23, 0xd5, 0x73, 0x8e, 0x18, 0x59, 0x1b, 0xf9, 0x85, 0xac,
+-      0x2a, 0xb9, 0x24, 0xea, 0xad, 0x35, 0x1b, 0x29, 0x4f, 0xbb, 0x18, 0x1f,
+-      0xf8, 0x18, 0x27, 0x7c, 0x91, 0x1e, 0xc3, 0xac, 0x55, 0xd5, 0xe8, 0x7a,
+-      0x47, 0x6b, 0x6e, 0x8e, 0x6c, 0x76, 0x4d, 0xc7, 0xb5, 0xcf, 0xcd, 0xcb,
+-      0x48, 0x43, 0x4d, 0xc7, 0x8c, 0x59, 0xf1, 0x8f, 0xc0, 0xdf, 0x71, 0xad,
+-      0xee, 0xe7, 0xe7, 0x60, 0x9a, 0xed, 0xb8, 0x16, 0x72, 0x44, 0xfc, 0xf7,
+-      0xe0, 0xaf, 0x68, 0x8d, 0x20, 0x36, 0x96, 0x7a, 0x31, 0x30, 0x2e, 0x7d,
+-      0x8e, 0x4f, 0x7c, 0x6c, 0xcb, 0x9f, 0xf3, 0xbf, 0x75, 0x3c, 0xd2, 0xe3,
+-      0xa9, 0xf2, 0x7f, 0xef, 0xf4, 0xe7, 0x73, 0x0d, 0x67, 0x38, 0xaf, 0xf2,
+-      0x7c, 0xbc, 0xef, 0x37, 0x2f, 0xdf, 0x20, 0xb6, 0x5b, 0xf3, 0xed, 0x75,
+-      0xb3, 0x0f, 0xbb, 0xc8, 0xd7, 0xd7, 0x75, 0x18, 0x78, 0x2d, 0xf1, 0x80,
+-      0xb9, 0xd5, 0x92, 0xc1, 0x9f, 0x58, 0xcf, 0xf7, 0xb4, 0x56, 0x2c, 0x7b,
+-      0xb7, 0xfd, 0x96, 0xf7, 0x04, 0x78, 0x8f, 0x60, 0x7e, 0x5f, 0x20, 0x6a,
+-      0xed, 0xd7, 0xd9, 0x7b, 0x03, 0xdf, 0xa2, 0x38, 0xcb, 0xfb, 0x06, 0xb2,
+-      0x70, 0x8e, 0xd7, 0x09, 0xd7, 0x38, 0xd3, 0xf6, 0x81, 0x6c, 0xfb, 0xd8,
+-      0x5f, 0x21, 0x19, 0xe0, 0xfe, 0xa4, 0x6d, 0xff, 0xd1, 0xce, 0xfb, 0x80,
+-      0xa7, 0x0c, 0x77, 0xed, 0x0a, 0x50, 0x8d, 0xdf, 0x67, 0xd9, 0xc3, 0x75,
+-      0xfa, 0xdb, 0xab, 0xfe, 0xb1, 0x95, 0xeb, 0x7c, 0xee, 0x09, 0xbe, 0xbb,
+-      0x6a, 0xb2, 0x55, 0x22, 0x3c, 0xc5, 0x6b, 0xf2, 0xde, 0x02, 0xe7, 0x55,
+-      0x2b, 0xee, 0x7a, 0x1a, 0x57, 0x18, 0xee, 0x05, 0x2b, 0x9c, 0x62, 0x51,
+-      0xa6, 0x9f, 0x6c, 0x4f, 0x45, 0x22, 0x63, 0x78, 0x9a, 0x57, 0x84, 0xf0,
+-      0x50, 0x66, 0x3e, 0x26, 0xb7, 0xa3, 0x7d, 0x0a, 0xf8, 0xdf, 0x99, 0x20,
+-      0xda, 0x26, 0xc2, 0x43, 0xb7, 0x3b, 0xc2, 0xc3, 0xef, 0x38, 0xf8, 0x5e,
+-      0xa1, 0xeb, 0x26, 0x0b, 0x7f, 0x1f, 0xed, 0x5a, 0x66, 0x7d, 0xbe, 0xdd,
+-      0x75, 0x63, 0xe1, 0x6e, 0xa4, 0xe7, 0xdc, 0x97, 0xf3, 0x0e, 0x13, 0x0f,
+-      0xc5, 0x1c, 0xf8, 0x9a, 0xf6, 0xd7, 0xe4, 0x5b, 0x82, 0x6c, 0xe3, 0x18,
+-      0xe7, 0x60, 0x4b, 0xa7, 0xae, 0x15, 0x2a, 0xda, 0x32, 0x8d, 0x84, 0xd7,
+-      0x9a, 0xa8, 0xe6, 0x6f, 0xc4, 0x0f, 0x73, 0x8c, 0xd7, 0x4c, 0x8a, 0xfb,
+-      0x26, 0x5e, 0xef, 0x30, 0x86, 0x82, 0x50, 0x8c, 0x37, 0x85, 0x92, 0xba,
+-      0xdd, 0xa1, 0x1c, 0x69, 0x72, 0xf8, 0xb1, 0x2f, 0x62, 0xe7, 0xd1, 0x4e,
+-      0x2b, 0x6f, 0xbe, 0xd3, 0x65, 0xf7, 0xec, 0x4e, 0x56, 0xf3, 0xeb, 0xa9,
+-      0x2e, 0x6d, 0x56, 0x39, 0x9a, 0x22, 0xff, 0x59, 0x48, 0xf1, 0x73, 0x3c,
+-      0x9b, 0xb2, 0xce, 0x82, 0xfc, 0x32, 0x53, 0x43, 0xb6, 0x11, 0xd6, 0xc6,
+-      0x11, 0x8e, 0x3e, 0x64, 0xd1, 0xfa, 0xb3, 0xae, 0x58, 0xa1, 0x8c, 0x8a,
+-      0x53, 0x39, 0x08, 0x14, 0x09, 0x37, 0xb4, 0xf9, 0x5f, 0x46, 0x99, 0xfb,
+-      0xa1, 0x56, 0xa0, 0x67, 0x1e, 0x5a, 0x0b, 0x40, 0x2e, 0xe3, 0xbe, 0x0c,
+-      0xab, 0x17, 0xeb, 0xc0, 0x5a, 0x6d, 0x3b, 0xe1, 0x42, 0xde, 0xff, 0x15,
+-      0x54, 0x63, 0x37, 0xa2, 0xb2, 0xc1, 0x89, 0xf1, 0x0c, 0xe7, 0xe1, 0x63,
+-      0x5d, 0xf2, 0x28, 0x2a, 0x6e, 0x7b, 0x4f, 0x33, 0xe1, 0xa6, 0x0c, 0x3d,
+-      0x57, 0x22, 0x4c, 0x4a, 0xb1, 0x63, 0x6b, 0xec, 0x37, 0x66, 0xb2, 0xd1,
+-      0xde, 0x53, 0x19, 0x9d, 0x14, 0x58, 0xa0, 0x26, 0x31, 0x3a, 0xe7, 0xf4,
+-      0xa5, 0xd3, 0x51, 0xa4, 0xcb, 0xfc, 0xbc, 0xfb, 0x72, 0xd2, 0x9a, 0x3f,
+-      0xb2, 0x77, 0x89, 0xc3, 0x81, 0x65, 0x1d, 0x87, 0x50, 0x59, 0x68, 0xd3,
+-      0x10, 0x24, 0x4c, 0xc0, 0x35, 0x6c, 0x13, 0xf1, 0x7a, 0xe7, 0xe3, 0x5c,
+-      0x47, 0xfc, 0xa4, 0xeb, 0xe6, 0x29, 0xf6, 0xeb, 0x63, 0x5d, 0x1f, 0xa4,
+-      0x95, 0x64, 0x93, 0x04, 0xb9, 0x8e, 0xf8, 0xbf, 0x6f, 0x94, 0xfb, 0x08,
+-      0xbf, 0xe0, 0x3e, 0x02, 0xe5, 0x65, 0x65, 0xb8, 0x59, 0x78, 0xc5, 0xba,
+-      0x0c, 0xd5, 0x15, 0x44, 0xf3, 0xa5, 0x88, 0xd2, 0x53, 0x22, 0x8c, 0xb2,
+-      0x45, 0x50, 0x5d, 0x57, 0xb6, 0xe5, 0x65, 0x9f, 0xcd, 0xab, 0x5c, 0xc5,
+-      0x21, 0x51, 0x0b, 0x77, 0xf0, 0x3e, 0x34, 0xe7, 0x71, 0x6b, 0x4f, 0x9f,
+-      0xae, 0xff, 0xbc, 0x6b, 0x09, 0xd5, 0x16, 0x23, 0x4c, 0x1f, 0x78, 0xaf,
+-      0x8f, 0x6a, 0xd0, 0xec, 0xf1, 0x2a, 0x2e, 0xf1, 0x56, 0xe5, 0xc2, 0xdf,
+-      0xf9, 0x4c, 0xe2, 0x6b, 0x5d, 0x9b, 0x26, 0xf9, 0x8c, 0xe2, 0x4f, 0xba,
+-      0xd6, 0x4c, 0x2a, 0xa1, 0x8d, 0xb4, 0xee, 0x6e, 0xde, 0x5f, 0xa7, 0x39,
+-      0x67, 0x35, 0xa6, 0xbb, 0xd0, 0x75, 0x73, 0x96, 0x7b, 0xcb, 0xc7, 0xba,
+-      0xcc, 0x6c, 0x98, 0x31, 0xa8, 0x65, 0x2b, 0x89, 0x02, 0x55, 0xf3, 0xd7,
+-      0xd9, 0xbc, 0xba, 0x48, 0x1f, 0x87, 0xd2, 0x84, 0x76, 0xe2, 0xb6, 0x6e,
+-      0x56, 0x17, 0xd6, 0x20, 0xd5, 0xd4, 0x4d, 0x35, 0xa8, 0xdf, 0xb7, 0x36,
+-      0xd3, 0x8d, 0x09, 0xd2, 0xe1, 0xa6, 0x52, 0xd0, 0xd7, 0x9d, 0x51, 0x31,
+-      0x50, 0xe2, 0x7a, 0xb3, 0xd2, 0xb5, 0x6b, 0x72, 0xaa, 0x5a, 0xff, 0xf6,
+-      0x53, 0xcd, 0x4a, 0x76, 0x91, 0xb1, 0x6d, 0xae, 0xb5, 0x40, 0x34, 0x0b,
+-      0x7b, 0x5e, 0x37, 0xad, 0x73, 0xfd, 0xe8, 0x77, 0xcd, 0xd0, 0x42, 0xb6,
+-      0x85, 0xbb, 0xf1, 0xf8, 0x94, 0xcf, 0x08, 0xe8, 0x7e, 0x74, 0x76, 0x9c,
+-      0xa2, 0x67, 0xdb, 0xf1, 0xf8, 0xe1, 0x5b, 0x90, 0xff, 0x23, 0x27, 0x2e,
+-      0x66, 0x92, 0x58, 0xda, 0xf1, 0x55, 0x9c, 0xd9, 0x20, 0xe3, 0xef, 0x32,
+-      0x5e, 0x5c, 0x22, 0xfe, 0x0c, 0x6b, 0x8e, 0x7f, 0xcf, 0xfe, 0x90, 0x5b,
+-      0xb8, 0xc7, 0x35, 0xc6, 0x9e, 0xbf, 0xe7, 0x06, 0xf7, 0xde, 0x0c, 0xd4,
+-      0x10, 0x0e, 0x0a, 0x13, 0xcd, 0x6a, 0x86, 0xcf, 0x38, 0x05, 0x7c, 0x9c,
+-      0x2b, 0xa7, 0x89, 0x27, 0x47, 0xa9, 0xc5, 0xe7, 0x24, 0x7e, 0x9c, 0xa5,
+-      0x73, 0x14, 0x03, 0xd8, 0x07, 0xdc, 0x97, 0x43, 0x96, 0x1d, 0x5c, 0xbb,
+-      0xf6, 0x7e, 0x0f, 0xef, 0xf1, 0x1f, 0xcf, 0x72, 0x6c, 0x14, 0x54, 0xbb,
+-      0x84, 0x90, 0x9c, 0x5d, 0x82, 0x9e, 0xd9, 0xed, 0x74, 0x5d, 0x45, 0x5f,
+-      0xd5, 0xd7, 0x42, 0x05, 0x8f, 0x87, 0xf1, 0x49, 0x2e, 0x63, 0xff, 0x8e,
+-      0x5c, 0xfd, 0xed, 0x16, 0x8d, 0xe3, 0x84, 0x1d, 0x11, 0xb7, 0xf2, 0xb0,
+-      0xda, 0xf1, 0xef, 0xe2, 0xe5, 0x72, 0xca, 0xa2, 0x61, 0x37, 0xcd, 0xc5,
+-      0xb2, 0x79, 0xce, 0x4c, 0xdd, 0xc9, 0xf2, 0x0b, 0xf8, 0x7e, 0x48, 0xfa,
+-      0x98, 0xa4, 0x67, 0x1e, 0x27, 0x1e, 0xca, 0xc4, 0x5b, 0xb6, 0xf4, 0x5d,
+-      0x1a, 0xc3, 0xf7, 0x40, 0xfa, 0x32, 0x14, 0x67, 0xf5, 0x6c, 0xe6, 0x08,
+-      0xe5, 0xcb, 0x5a, 0x8a, 0x45, 0x67, 0xe3, 0xf7, 0x62, 0x6d, 0x4e, 0x49,
+-      0x1a, 0x14, 0x2e, 0x53, 0x7e, 0x08, 0xa7, 0xce, 0x36, 0xfc, 0x36, 0xd9,
+-      0x70, 0x0b, 0x61, 0x80, 0x70, 0xe8, 0x1c, 0x8d, 0x37, 0x9c, 0x32, 0x1e,
+-      0x9b, 0x90, 0x70, 0x8e, 0xf7, 0x80, 0x85, 0xfd, 0xbc, 0x01, 0x1e, 0x3b,
+-      0xff, 0xbd, 0x8e, 0xea, 0xba, 0x70, 0x82, 0xb2, 0xaa, 0x51, 0x4f, 0xb8,
+-      0xbd, 0xd0, 0xf9, 0x08, 0xf6, 0x53, 0x7d, 0xbf, 0x35, 0x46, 0x32, 0x69,
+-      0x8c, 0x53, 0xbd, 0xd1, 0x36, 0x74, 0x01, 0x7f, 0x67, 0x56, 0x78, 0x1f,
+-      0x5d, 0x84, 0x13, 0x17, 0xf0, 0x99, 0x29, 0xa9, 0xea, 0xe9, 0x19, 0xa8,
+-      0x95, 0x73, 0x68, 0x1b, 0xbe, 0x82, 0x0f, 0x4d, 0xde, 0x63, 0x97, 0x25,
+-      0x89, 0x30, 0x60, 0xd8, 0xef, 0x44, 0x00, 0x95, 0x80, 0x84, 0x5b, 0x35,
+-      0xee, 0x49, 0x2b, 0xc3, 0x4f, 0x13, 0x96, 0x7f, 0x5f, 0xb4, 0x0d, 0x7e,
+-      0x8c, 0x33, 0x66, 0xbe, 0x91, 0xd7, 0x15, 0x48, 0xdc, 0xd8, 0x76, 0xba,
+-      0x06, 0x4a, 0x8f, 0x4b, 0xa8, 0x89, 0x66, 0xe9, 0xaf, 0xcd, 0x33, 0x81,
+-      0xcf, 0x4c, 0x35, 0xf2, 0x19, 0xe1, 0x20, 0x35, 0x38, 0x4d, 0x3e, 0x31,
+-      0x88, 0x79, 0xda, 0xfe, 0x81, 0xf8, 0xd7, 0x88, 0x06, 0xc6, 0x7d, 0x86,
+-      0x7b, 0x0f, 0xd1, 0xf6, 0x53, 0xc2, 0x01, 0x5b, 0x63, 0x17, 0xcc, 0xe4,
+-      0x42, 0xeb, 0xfc, 0x5e, 0x9d, 0xdd, 0xfb, 0x66, 0x5f, 0xb9, 0x1b, 0x9b,
+-      0xd2, 0x4e, 0x92, 0xd3, 0x3c, 0x5e, 0x73, 0x51, 0x0c, 0x66, 0x8c, 0x53,
+-      0xb9, 0x9e, 0x4a, 0x33, 0xc7, 0xac, 0x0a, 0xec, 0xa2, 0xb8, 0xb0, 0xd3,
+-      0xca, 0x05, 0xf0, 0x2c, 0x5e, 0xd1, 0x81, 0x2b, 0x53, 0xff, 0xc3, 0x43,
+-      0xfa, 0x5b, 0xad, 0x2e, 0x87, 0x08, 0x66, 0x0c, 0xd1, 0xa0, 0x4b, 0xf8,
+-      0xb8, 0x53, 0xe9, 0x71, 0x48, 0xc3, 0xb8, 0x31, 0x66, 0x98, 0x5e, 0x55,
+-      0xed, 0x6f, 0x17, 0x91, 0xbe, 0x92, 0x88, 0xa2, 0xae, 0xe4, 0x95, 0xeb,
+-      0x4a, 0xed, 0xb2, 0xa7, 0x64, 0xb8, 0xfd, 0x2b, 0xee, 0xa5, 0xba, 0x65,
+-      0x07, 0xd5, 0xb6, 0x5e, 0xaa, 0xaf, 0x15, 0xb2, 0xc7, 0x1a, 0x92, 0x7f,
+-      0x88, 0xe2, 0x80, 0x0e, 0x67, 0x66, 0x1b, 0x5c, 0x99, 0xb0, 0x7f, 0x37,
+-      0x76, 0x20, 0x19, 0xb4, 0xb1, 0xad, 0x4c, 0xba, 0xaa, 0xed, 0x64, 0x2c,
+-      0x73, 0x2f, 0xce, 0xe4, 0x19, 0x9f, 0x27, 0xb0, 0x31, 0xcd, 0xbf, 0xe1,
+-      0x79, 0x39, 0xae, 0xe3, 0x28, 0xd5, 0x4e, 0xee, 0x8e, 0x66, 0xd2, 0x43,
+-      0x0b, 0x46, 0xca, 0x82, 0x4d, 0x90, 0x74, 0x01, 0xcf, 0xd1, 0x4e, 0x19,
+-      0xfb, 0x66, 0x28, 0x91, 0x50, 0x9e, 0x72, 0x92, 0x9d, 0xef, 0x26, 0x1b,
+-      0xf2, 0xaa, 0x5e, 0xfa, 0x1d, 0xe0, 0x73, 0x47, 0x64, 0x93, 0x3f, 0xe9,
+-      0x6a, 0xb7, 0x62, 0xcd, 0x2f, 0xa8, 0xc6, 0xf9, 0x15, 0xf1, 0xc2, 0xb2,
+-      0xd0, 0x51, 0x37, 0x3e, 0x5f, 0x13, 0xae, 0xb9, 0xa3, 0x0e, 0x41, 0x9a,
+-      0x33, 0x58, 0xdd, 0x23, 0x13, 0x58, 0x13, 0xeb, 0x40, 0x31, 0x27, 0xaa,
+-      0x18, 0x6b, 0x44, 0xf1, 0x62, 0x35, 0xf6, 0x53, 0xed, 0xef, 0x53, 0x37,
+-      0x22, 0xe3, 0xaf, 0x78, 0xde, 0x89, 0x73, 0x0d, 0x00, 0xcf, 0x00, 0x61,
+-      0xa8, 0xd1, 0xf4, 0x57, 0x90, 0x5f, 0x08, 0xf7, 0x3d, 0x71, 0x3e, 0x9f,
+-      0x49, 0x21, 0x4a, 0x5d, 0x8d, 0x86, 0xe5, 0xbd, 0xf8, 0xb8, 0x91, 0xf1,
+-      0xaf, 0x97, 0x62, 0x83, 0x8c, 0xdd, 0x33, 0x01, 0xeb, 0x5c, 0x04, 0xc5,
+-      0xc0, 0x2a, 0xcd, 0xd7, 0xd2, 0xfa, 0x65, 0x34, 0xb2, 0x4c, 0xfe, 0x6f,
+-      0x34, 0x92, 0xcd, 0x12, 0xe6, 0xc9, 0xa5, 0x07, 0xf0, 0x4a, 0x9a, 0xe7,
+-      0x0d, 0x27, 0x35, 0xe1, 0xe7, 0x9e, 0xbc, 0x25, 0x13, 0x63, 0x86, 0xd7,
+-      0xf0, 0x5a, 0xb1, 0xc9, 0x5e, 0x27, 0xc0, 0xbd, 0xa2, 0xff, 0xe0, 0x5a,
+-      0x1a, 0xe5, 0xc7, 0xd5, 0x54, 0x77, 0x46, 0xa1, 0x7e, 0xa3, 0x42, 0xfa,
+-      0xe0, 0x1e, 0xf5, 0x12, 0xc2, 0xbc, 0x70, 0xbf, 0x1a, 0xe7, 0x73, 0xc8,
+-      0xe6, 0x0e, 0x59, 0x37, 0x4d, 0x57, 0xa7, 0xea, 0x7f, 0x0f, 0x6c, 0x87,
+-      0x5e, 0xde, 0xeb, 0x70, 0xef, 0xee, 0xf4, 0x62, 0x1f, 0xe5, 0xc0, 0x67,
+-      0xd3, 0x6d, 0x06, 0xd7, 0x7e, 0x60, 0x1c, 0x2a, 0x52, 0xf4, 0xec, 0x50,
+-      0x1d, 0x9f, 0x09, 0xda, 0x55, 0xde, 0x06, 0x47, 0xe6, 0xb6, 0x3a, 0xae,
+-      0x37, 0x6a, 0xa8, 0x4e, 0x1e, 0x49, 0x33, 0xbd, 0xdc, 0x7b, 0x33, 0xcd,
+-      0x9d, 0x71, 0xf5, 0xf2, 0x5a, 0xb2, 0x8b, 0x66, 0x9d, 0xe5, 0x18, 0xc0,
+-      0x93, 0x34, 0x36, 0x54, 0x66, 0x59, 0x7e, 0xb7, 0x8e, 0xfb, 0x9d, 0x7b,
+-      0x48, 0xbf, 0x0d, 0x59, 0x7b, 0x9e, 0x6c, 0x79, 0x10, 0x4b, 0x46, 0x5f,
+-      0xa8, 0xb3, 0x6b, 0x1f, 0xae, 0xcb, 0x87, 0xb0, 0x27, 0x1d, 0xc0, 0x4c,
+-      0xba, 0xcd, 0xff, 0x12, 0x9c, 0xd5, 0xbc, 0xca, 0xe7, 0x88, 0xe7, 0xc7,
+-      0x04, 0x30, 0x7d, 0xf5, 0x3b, 0xcb, 0xc7, 0xee, 0x99, 0x1e, 0xb7, 0x30,
+-      0xbf, 0x8c, 0x7c, 0xc0, 0xae, 0x63, 0x28, 0x56, 0x78, 0x1e, 0x25, 0xbd,
+-      0xbe, 0x4f, 0x7a, 0x75, 0x90, 0x5e, 0x5f, 0xd2, 0xfe, 0x92, 0x31, 0x8b,
+-      0x7b, 0x57, 0xdc, 0xcb, 0xfb, 0x43, 0x06, 0x81, 0x16, 0x6b, 0x4c, 0x26,
+-      0xee, 0xc4, 0xeb, 0x94, 0x07, 0x6b, 0x28, 0xfe, 0x9d, 0x4a, 0x9b, 0xab,
+-      0xe7, 0x62, 0x6d, 0xa9, 0xf7, 0x29, 0x4f, 0x1b, 0x7f, 0xa8, 0x68, 0x67,
+-      0xc8, 0x4f, 0xb3, 0x13, 0x7f, 0x8a, 0x33, 0x8d, 0x6d, 0xfe, 0xb7, 0x60,
+-      0xb8, 0x9f, 0x88, 0x3f, 0x42, 0x35, 0x3f, 0xd5, 0x0d, 0xcb, 0xff, 0x0b,
+-      0x39, 0x59, 0x1c, 0x92, 0xda, 0x76, 0xf9, 0x25, 0xfc, 0x15, 0xce, 0x5c,
+-      0x17, 0xd6, 0x5e, 0x02, 0x8f, 0xb1, 0xeb, 0xf1, 0xf0, 0xec, 0xfd, 0x7c,
+-      0x1e, 0x2a, 0x48, 0xe9, 0xcc, 0xde, 0xc7, 0x4a, 0xf3, 0xbe, 0x9b, 0x40,
+-      0x7e, 0x03, 0xd5, 0xd2, 0xd6, 0x39, 0x54, 0x78, 0x9e, 0x26, 0xbf, 0x88,
+-      0x8e, 0xf1, 0xf8, 0x63, 0x5d, 0x6a, 0x21, 0x04, 0x89, 0x30, 0x0e, 0x61,
+-      0x84, 0x1e, 0x3e, 0x9f, 0xf1, 0x74, 0x3a, 0x48, 0xb9, 0xa0, 0xad, 0x2f,
+-      0x2a, 0xbe, 0x0d, 0x1b, 0x03, 0x70, 0x9e, 0x3b, 0x46, 0x79, 0x4e, 0x49,
+-      0x3d, 0x8d, 0xb6, 0x7e, 0xaf, 0xb8, 0x1b, 0xa9, 0xc6, 0xb6, 0xc1, 0xa3,
+-      0x08, 0x13, 0x66, 0x50, 0xa2, 0x67, 0x60, 0xcf, 0xb3, 0xb4, 0x20, 0x51,
+-      0x9d, 0xc8, 0x71, 0x26, 0x8d, 0xa3, 0x7e, 0x09, 0x37, 0x74, 0xa8, 0x97,
+-      0xa7, 0x31, 0x6f, 0x2f, 0xf6, 0x98, 0xd5, 0x05, 0x1a, 0x2f, 0xf9, 0x09,
+-      0xdb, 0xd4, 0xc0, 0x49, 0xb5, 0xbf, 0xa4, 0x6f, 0xc3, 0xd6, 0x34, 0xe7,
+-      0x69, 0x92, 0x0b, 0xf9, 0x66, 0x5f, 0x64, 0x1b, 0x86, 0x0a, 0x01, 0xec,
+-      0xcf, 0x86, 0xf7, 0xee, 0x26, 0x5c, 0x37, 0x56, 0x0e, 0x87, 0x36, 0x8b,
+-      0x00, 0xe9, 0x9b, 0xea, 0xff, 0xa6, 0x20, 0xd5, 0xc9, 0x7e, 0xfa, 0xb7,
+-      0xeb, 0x99, 0x53, 0x54, 0xcf, 0xbc, 0x4e, 0xbe, 0xe6, 0xad, 0xd6, 0xaa,
+-      0x4b, 0xf3, 0x26, 0xe6, 0x62, 0xeb, 0x71, 0xc9, 0xd2, 0x59, 0x90, 0x6c,
+-      0x8c, 0x73, 0x08, 0x9f, 0x8d, 0x71, 0x8b, 0xcd, 0x63, 0x86, 0xfb, 0xc1,
+-      0xce, 0x20, 0xe5, 0x34, 0xc6, 0x9c, 0x8e, 0x3f, 0x92, 0x48, 0x1e, 0x33,
+-      0xea, 0x0e, 0xac, 0x8b, 0xed, 0xc0, 0x90, 0xf6, 0x5d, 0xd4, 0x34, 0x71,
+-      0x3c, 0x92, 0x8d, 0x06, 0x9a, 0xf7, 0x42, 0x67, 0x2f, 0xc2, 0x4f, 0x31,
+-      0x3e, 0xfa, 0x19, 0xe1, 0x23, 0xf6, 0x5d, 0x9e, 0xbf, 0x51, 0x5f, 0x46,
+-      0xb8, 0xa2, 0xbe, 0xd3, 0xce, 0xf3, 0x37, 0x16, 0xf8, 0x4c, 0x26, 0xa8,
+-      0x36, 0x85, 0xe7, 0xdd, 0x95, 0x3a, 0x9e, 0xa0, 0x18, 0x93, 0x58, 0xee,
+-      0x02, 0x16, 0xf0, 0xd9, 0x63, 0xbb, 0x8e, 0x61, 0x7e, 0x97, 0x14, 0x04,
+-      0x66, 0xe3, 0x64, 0x1f, 0xff, 0xea, 0x8c, 0x51, 0xa8, 0x7a, 0x36, 0x94,
+-      0xfb, 0x27, 0x07, 0xcc, 0x24, 0xbf, 0x33, 0xe0, 0xa8, 0xf3, 0x52, 0xbc,
+-      0x0d, 0x56, 0x20, 0x79, 0x39, 0x2e, 0x4b, 0xea, 0xbc, 0xdc, 0x59, 0xd6,
+-      0x47, 0x38, 0xbe, 0x5b, 0xba, 0x70, 0xd2, 0x33, 0xbb, 0x26, 0x95, 0xe1,
+-      0xdd, 0x68, 0x1b, 0xfa, 0x40, 0xd4, 0x5a, 0x3b, 0x97, 0xd3, 0xed, 0x48,
+-      0x2d, 0xd6, 0x9d, 0x1b, 0xae, 0x64, 0x57, 0x13, 0x1d, 0xe7, 0x4c, 0x5c,
+-      0xb7, 0xc6, 0xda, 0xdf, 0x9a, 0x6e, 0xff, 0x73, 0x9a, 0x9b, 0xbf, 0x3f,
+-      0xe0, 0xe5, 0x33, 0x93, 0xc7, 0xb3, 0x2f, 0x9a, 0xd1, 0x85, 0xb6, 0x7c,
+-      0x4e, 0x90, 0xef, 0x07, 0x75, 0x07, 0x9a, 0xd5, 0xc8, 0xe5, 0x7e, 0xfa,
+-      0xfd, 0xb7, 0x05, 0x42, 0xfb, 0x2b, 0x07, 0xf1, 0xab, 0xbc, 0x8e, 0xc7,
+-      0x28, 0x0f, 0x34, 0xa8, 0x8a, 0x3f, 0xcf, 0xfb, 0xd7, 0x31, 0x9b, 0xff,
+-      0x9b, 0xf2, 0xe4, 0x87, 0x8d, 0x7e, 0xab, 0xc6, 0xb0, 0xf9, 0x2b, 0x10,
+-      0x7f, 0x03, 0x5e, 0xf6, 0x85, 0xc5, 0xe4, 0x17, 0x7b, 0xc9, 0x5f, 0x1f,
+-      0x23, 0x5b, 0xa3, 0x0a, 0x9e, 0xfc, 0x40, 0xd9, 0x0b, 0xf2, 0xd7, 0xb1,
+-      0x34, 0xcb, 0x3f, 0xe8, 0x1b, 0x18, 0xe5, 0xb8, 0x6b, 0xf5, 0x55, 0xb5,
+-      0x90, 0x83, 0xe3, 0xae, 0x15, 0x4f, 0x8d, 0x90, 0xe3, 0xd7, 0x75, 0x4c,
+-      0xd7, 0x48, 0x39, 0x1c, 0xf4, 0xf0, 0x79, 0x7e, 0x02, 0x87, 0x03, 0x9a,
+-      0x9d, 0x2b, 0xe7, 0x28, 0x1f, 0x5d, 0x22, 0x3a, 0xf6, 0xc7, 0x9a, 0x91,
+-      0xa2, 0x7c, 0x94, 0x51, 0x6d, 0x5b, 0x52, 0x67, 0x19, 0x63, 0xfe, 0x82,
+-      0x30, 0xa6, 0x12, 0x72, 0x49, 0x6d, 0xc3, 0x27, 0xb1, 0xcd, 0x3c, 0xd3,
+-      0xc8, 0x36, 0xe5, 0xc2, 0xe1, 0xf6, 0x59, 0xb3, 0x12, 0x60, 0x7e, 0x25,
+-      0xbc, 0xa8, 0x91, 0xcd, 0x5c, 0x17, 0x0e, 0xbe, 0x48, 0x39, 0x75, 0xa6,
+-      0xaa, 0x8f, 0x70, 0x61, 0xde, 0x1e, 0x63, 0x2c, 0xeb, 0x68, 0x0a, 0x6a,
+-      0xa2, 0x80, 0x3f, 0xa6, 0xef, 0xad, 0xc1, 0x4b, 0x55, 0x5b, 0x5d, 0x36,
+-      0xfb, 0xdf, 0xbd, 0xd5, 0x77, 0x6c, 0xac, 0x67, 0x42, 0x85, 0xfb, 0xe9,
+-      0x37, 0xcf, 0x19, 0xe0, 0xb3, 0x2d, 0x7c, 0xd6, 0xca, 0xb3, 0xb5, 0xb3,
+-      0x86, 0xfd, 0xc5, 0xcf, 0xef, 0x15, 0xac, 0x1b, 0xe3, 0xbe, 0x30, 0xf7,
+-      0x68, 0x24, 0xec, 0xbe, 0xfa, 0xde, 0x03, 0x7f, 0xf6, 0xe0, 0xd6, 0x31,
+-      0xee, 0x45, 0x9c, 0xb8, 0x59, 0xc6, 0x3f, 0x51, 0x1e, 0x96, 0xd9, 0xe7,
+-      0xc9, 0xd7, 0x7f, 0xd4, 0x75, 0x6a, 0x92, 0x73, 0xea, 0xdb, 0x5d, 0x9b,
+-      0xd2, 0xf3, 0x3a, 0xbe, 0xca, 0xd3, 0xe9, 0x7b, 0x28, 0xee, 0x64, 0xd2,
+-      0xca, 0x70, 0x44, 0xb2, 0xf6, 0xd5, 0x52, 0x25, 0xf1, 0x15, 0x2a, 0xd2,
+-      0x78, 0xbe, 0x5e, 0xf4, 0x8f, 0x85, 0xa8, 0xb6, 0xf1, 0xfb, 0x1e, 0x38,
+-      0x60, 0x52, 0xae, 0x70, 0xe2, 0xe9, 0xd1, 0xb0, 0xf6, 0x26, 0xe1, 0x9d,
+-      0x67, 0x46, 0x4d, 0xf3, 0x4d, 0x0d, 0x7f, 0xd2, 0x40, 0x35, 0x72, 0xbb,
+-      0x50, 0x12, 0x84, 0x0d, 0x42, 0xeb, 0x45, 0x5b, 0xb0, 0x00, 0xe5, 0xf4,
+-      0x4e, 0x9a, 0xef, 0x50, 0x11, 0x78, 0xb1, 0xe8, 0xc1, 0x0b, 0x63, 0xdc,
+-      0xfb, 0xf3, 0xa0, 0xf4, 0x54, 0x93, 0x6f, 0xdb, 0x81, 0x10, 0xc5, 0x58,
+-      0x19, 0xbd, 0x87, 0x12, 0xb8, 0xf5, 0x80, 0x40, 0x34, 0x92, 0x40, 0xcf,
+-      0xa1, 0x7a, 0xac, 0x1f, 0x93, 0x71, 0x31, 0x5e, 0x8f, 0xdb, 0x9e, 0x9a,
+-      0xe7, 0xe3, 0x9d, 0x6a, 0x9d, 0x27, 0x5b, 0xe7, 0xd8, 0x8e, 0x66, 0x39,
+-      0x66, 0x53, 0xbe, 0xc8, 0x72, 0x0c, 0x34, 0xcd, 0x60, 0xa7, 0xdd, 0xe7,
+-      0x78, 0x8e, 0xf2, 0xc7, 0x13, 0x9d, 0x6a, 0x30, 0xe8, 0xd0, 0x71, 0xc3,
+-      0x44, 0xe5, 0xdb, 0x0d, 0x30, 0x8f, 0xf3, 0x1e, 0xc6, 0xa7, 0xed, 0xa6,
+-      0x79, 0x6b, 0x3c, 0x72, 0x99, 0x2a, 0x3b, 0xf2, 0xa9, 0xb7, 0xc9, 0xa7,
+-      0x5a, 0xf0, 0x44, 0x76, 0x7e, 0xaf, 0x4b, 0xed, 0xbf, 0x20, 0x19, 0x3b,
+-      0xfc, 0x30, 0x3f, 0xa9, 0xd5, 0xcd, 0x4f, 0x5d, 0x7a, 0x24, 0xb8, 0x5d,
+-      0xf0, 0x19, 0x11, 0xee, 0x89, 0x9b, 0xe6, 0xd9, 0xb8, 0x69, 0x16, 0xe3,
+-      0x86, 0x7b, 0xd9, 0x0a, 0x3f, 0x0e, 0x2d, 0xe5, 0x77, 0x0d, 0xc2, 0xc9,
+-      0x66, 0xb2, 0x2f, 0xcf, 0x52, 0x35, 0xb8, 0x91, 0xea, 0x2b, 0x83, 0x82,
+-      0x5c, 0x68, 0xa1, 0xd2, 0x0f, 0xb4, 0xf8, 0xf6, 0x8f, 0x36, 0xe1, 0x99,
+-      0xb9, 0xdf, 0xe5, 0xe3, 0x39, 0x56, 0x3f, 0xed, 0x13, 0x0d, 0xab, 0x1b,
+-      0x10, 0x49, 0x6e, 0x01, 0xf7, 0x46, 0xf9, 0x4c, 0xaa, 0x81, 0xdb, 0xe2,
+-      0x83, 0xd8, 0x3a, 0xc6, 0xfb, 0x6b, 0x3f, 0xef, 0xfa, 0x64, 0xcc, 0xfc,
+-      0x5b, 0x37, 0xd1, 0xbf, 0xba, 0xb3, 0x2d, 0xe5, 0xb1, 0xde, 0x55, 0x3a,
+-      0x49, 0x75, 0x40, 0x23, 0xca, 0x33, 0x6a, 0x65, 0xb1, 0x48, 0xbe, 0xe9,
+-      0x45, 0x24, 0xd8, 0x4c, 0xb1, 0x6a, 0x8e, 0x7c, 0x77, 0xa6, 0xcc, 0x75,
+-      0xc0, 0x2f, 0xbb, 0xcc, 0x89, 0x45, 0x98, 0x9e, 0xa3, 0xb9, 0xb2, 0x6a,
+-      0xcf, 0x47, 0x84, 0xf3, 0xea, 0x74, 0xb3, 0xc1, 0xa3, 0x47, 0x4e, 0xb7,
+-      0x09, 0x09, 0x97, 0x97, 0x9b, 0x66, 0x6f, 0xa7, 0x3a, 0x5c, 0x2f, 0x30,
+-      0xe4, 0xd0, 0xd5, 0x44, 0xbb, 0x84, 0xaf, 0x06, 0x11, 0xe9, 0x39, 0x8b,
+-      0x48, 0xff, 0x39, 0x8a, 0x61, 0xcf, 0x96, 0xf9, 0x9c, 0xef, 0x23, 0xf8,
+-      0xdb, 0xb1, 0x85, 0x38, 0x3e, 0xf3, 0x50, 0xb5, 0x27, 0x06, 0xcf, 0x8d,
+-      0x2b, 0x74, 0x1c, 0x26, 0xbd, 0x9e, 0xd4, 0x6a, 0x28, 0xae, 0xcb, 0x70,
+-      0xb4, 0x42, 0x6e, 0xa4, 0x3a, 0x21, 0xf6, 0xb8, 0x69, 0x2e, 0x6b, 0xb5,
+-      0x6b, 0x9e, 0x65, 0xb3, 0xd7, 0xbe, 0xa3, 0x30, 0xdf, 0xef, 0x09, 0x92,
+-      0xfe, 0xda, 0x52, 0x5b, 0xc5, 0x49, 0xd3, 0xf8, 0x43, 0x41, 0x3c, 0xdf,
+-      0x56, 0x0f, 0x0f, 0xf3, 0x2d, 0x63, 0xe7, 0x04, 0xf7, 0xe1, 0x58, 0x6f,
+-      0xf0, 0xf4, 0xc4, 0x79, 0x9f, 0x9c, 0x75, 0x54, 0xf1, 0xac, 0x8b, 0x53,
+-      0x4c, 0x14, 0x3e, 0xc2, 0x53, 0x86, 0xbb, 0x9b, 0xf2, 0x53, 0xed, 0x18,
+-      0xbf, 0x2f, 0xe1, 0xc5, 0x63, 0x14, 0x37, 0x2e, 0x69, 0x75, 0xd8, 0xdf,
+-      0xc8, 0xb6, 0xc3, 0x74, 0x72, 0xcf, 0x70, 0x1b, 0xee, 0xe5, 0x77, 0x4e,
+-      0xca, 0xbf, 0x6b, 0x9d, 0x0d, 0xa4, 0x6b, 0x84, 0x0d, 0x98, 0x8e, 0xf9,
+-      0xf5, 0x7b, 0xb0, 0x78, 0x94, 0xf5, 0x78, 0xac, 0x2b, 0x48, 0x32, 0x7a,
+-      0x82, 0xec, 0xc2, 0xa1, 0x77, 0x43, 0x26, 0x5b, 0x5c, 0x1b, 0xbf, 0x76,
+-      0x0e, 0x75, 0xe8, 0x9c, 0x44, 0xf5, 0x9d, 0xc4, 0xfb, 0x79, 0x4a, 0xe2,
+-      0x88, 0xb8, 0x76, 0xce, 0x7c, 0x3d, 0xf7, 0x13, 0x8d, 0x19, 0x3b, 0x2f,
+-      0x1d, 0xa6, 0xbc, 0xf4, 0x4a, 0x8e, 0x7d, 0xe4, 0x17, 0x96, 0x8f, 0x38,
+-      0x28, 0xd6, 0xae, 0x49, 0x87, 0x70, 0x4e, 0x83, 0x5a, 0x83, 0x18, 0xd1,
+-      0x1d, 0xe9, 0xe9, 0xae, 0x62, 0x3e, 0x17, 0xc5, 0xff, 0x99, 0x9c, 0x32,
+-      0x68, 0xf5, 0x9f, 0x54, 0xa5, 0x8f, 0x3f, 0x79, 0xef, 0x3f, 0xa8, 0x0f,
+-      0xa1, 0x61, 0x25, 0x70, 0x7e, 0x94, 0xfb, 0x55, 0xbc, 0xcf, 0x35, 0x2c,
+-      0xae, 0xf0, 0x7b, 0x61, 0xb5, 0x43, 0x78, 0x2f, 0xce, 0xef, 0x5b, 0xb1,
+-      0xef, 0x3d, 0x0c, 0xf6, 0xbd, 0x06, 0x1a, 0xfb, 0xc9, 0x68, 0x38, 0xd4,
+-      0x43, 0x7e, 0x33, 0x00, 0xeb, 0xbc, 0x90, 0x36, 0x6b, 0xf7, 0xc7, 0x93,
+-      0xa7, 0xaa, 0xfb, 0x5b, 0x91, 0xea, 0xde, 0x5c, 0xb4, 0xd0, 0x23, 0x2e,
+-      0x15, 0x98, 0xa6, 0xb7, 0x89, 0xa6, 0x6e, 0xf1, 0xe1, 0xec, 0x3a, 0x71,
+-      0x71, 0xb6, 0x57, 0x9c, 0x2d, 0x70, 0x4c, 0xfe, 0x79, 0xd7, 0xae, 0x1c,
+-      0xe7, 0xb3, 0x3b, 0xc5, 0xbb, 0xf9, 0x0d, 0xe2, 0x42, 0xa1, 0x5f, 0x7c,
+-      0x34, 0x6b, 0xe0, 0xfe, 0x78, 0x2f, 0x0a, 0x63, 0xf0, 0xbb, 0xf5, 0xfb,
+-      0xc5, 0xa5, 0xbc, 0xdd, 0x27, 0xbc, 0x50, 0x68, 0xf1, 0x15, 0xd2, 0x5c,
+-      0x03, 0x1f, 0xa3, 0x1a, 0x78, 0x91, 0xef, 0x99, 0xc9, 0x80, 0xaf, 0x34,
+-      0xa9, 0x0c, 0xde, 0x23, 0x4c, 0xf3, 0xb6, 0xd8, 0x69, 0xd6, 0xa1, 0xf9,
+-      0x5a, 0xcc, 0xc6, 0x07, 0x3b, 0x49, 0x1e, 0x9b, 0x29, 0xb7, 0x4c, 0x6b,
+-      0x6d, 0x55, 0x2c, 0xc2, 0xb6, 0xce, 0xbc, 0x72, 0xae, 0xe6, 0xfd, 0xa7,
+-      0x21, 0x38, 0x3b, 0x81, 0xbd, 0xe9, 0xcf, 0x79, 0xbd, 0x44, 0xbc, 0x1a,
+-      0xae, 0x21, 0x7c, 0x4c, 0xbc, 0xbe, 0x3e, 0xfa, 0xf9, 0x7e, 0x9e, 0x93,
+-      0xc6, 0xee, 0x4a, 0x87, 0x53, 0x47, 0x84, 0x52, 0x29, 0xd8, 0xfb, 0x79,
+-      0x9a, 0x57, 0x52, 0x4e, 0x8f, 0x50, 0x1d, 0xd1, 0x2a, 0xd9, 0xbc, 0x26,
+-      0xaa, 0xbc, 0xde, 0x44, 0xbc, 0x5e, 0x2c, 0x70, 0x7d, 0xfe, 0x76, 0xd7,
+-      0x1b, 0xa3, 0x63, 0x66, 0x3d, 0xd5, 0xff, 0x75, 0x6a, 0xb7, 0xb8, 0x40,
+-      0x3c, 0x7f, 0x48, 0x3c, 0x7f, 0x5c, 0xb8, 0x53, 0x7c, 0x44, 0x7c, 0x5e,
+-      0x2c, 0xf0, 0x1e, 0x9e, 0x5b, 0x7c, 0x98, 0xb3, 0x79, 0xfc, 0xf0, 0x2a,
+-      0x8f, 0x41, 0xdf, 0xfe, 0x74, 0x93, 0xef, 0xd1, 0x49, 0xbf, 0x6f, 0xcf,
+-      0xa4, 0x69, 0x7e, 0xa8, 0x49, 0x3e, 0xe6, 0xeb, 0x55, 0xed, 0x8b, 0x7c,
+-      0xdd, 0x4c, 0x7c, 0xf1, 0xfe, 0xeb, 0x6f, 0xeb, 0x70, 0x9e, 0xaf, 0xc7,
+-      0xac, 0x73, 0x6c, 0xf6, 0x19, 0xa9, 0x7a, 0xde, 0x83, 0x25, 0xbe, 0x7c,
+-      0x74, 0xfd, 0x95, 0x7f, 0xcd, 0xd7, 0xe0, 0x05, 0xd2, 0x5f, 0xb1, 0xca,
+-      0x57, 0xfd, 0xbf, 0xc9, 0x17, 0xd5, 0xba, 0x63, 0xcc, 0x57, 0xa3, 0xfe,
+-      0xc6, 0x98, 0x49, 0xfa, 0x92, 0xac, 0x77, 0xc1, 0x8a, 0xd9, 0x1d, 0x78,
+-      0x25, 0xc6, 0xef, 0xc7, 0x45, 0x42, 0x47, 0x28, 0x9e, 0xce, 0x96, 0x3d,
+-      0xa2, 0xc6, 0xda, 0x87, 0xc5, 0x1b, 0xb5, 0x44, 0xd3, 0xe1, 0x19, 0x7e,
+-      0xff, 0x0b, 0x1a, 0x61, 0x01, 0x3f, 0xbf, 0x37, 0x37, 0x0d, 0xee, 0x97,
+-      0xf5, 0x8a, 0x86, 0x22, 0xef, 0xbb, 0x6e, 0x10, 0xbe, 0x22, 0x9f, 0xa3,
+-      0xeb, 0x11, 0xde, 0x62, 0xb7, 0xf0, 0x1c, 0x32, 0x4c, 0x8f, 0xba, 0x4e,
+-      0xd4, 0x1d, 0xba, 0x53, 0x78, 0xaa, 0x7b, 0xb0, 0xee, 0x62, 0xd0, 0x97,
+-      0xbe, 0x46, 0x1e, 0x17, 0xb5, 0x9b, 0x2d, 0x79, 0xbc, 0xa6, 0xcd, 0xef,
+-      0x1f, 0x5a, 0xe7, 0x10, 0xf9, 0x1c, 0x9c, 0x27, 0x48, 0xb5, 0x53, 0x43,
+-      0xb5, 0x76, 0x7a, 0x37, 0xc6, 0xe7, 0x7b, 0x0c, 0x92, 0x3f, 0x42, 0x4e,
+-      0x5d, 0xe9, 0x3f, 0x21, 0xd4, 0xd4, 0xfd, 0x22, 0x79, 0xab, 0x97, 0xea,
+-      0x9f, 0xad, 0xb1, 0x48, 0xf2, 0x06, 0x11, 0x49, 0x38, 0x05, 0xe7, 0x15,
+-      0x4d, 0xae, 0x2d, 0x19, 0xd8, 0x43, 0xf1, 0xed, 0xe5, 0x9c, 0x83, 0xb0,
+-      0x03, 0xbf, 0x43, 0xe6, 0xc4, 0x5a, 0xbf, 0x17, 0x4f, 0x12, 0xee, 0x78,
+-      0x22, 0x3b, 0x88, 0x27, 0x0b, 0x03, 0x78, 0xa2, 0xf0, 0xaf, 0xde, 0x95,
+-      0x91, 0x3d, 0xfa, 0xf9, 0x95, 0xd5, 0x33, 0x08, 0x89, 0xeb, 0x23, 0x1c,
+-      0xa3, 0x1f, 0x6e, 0x97, 0x23, 0x5c, 0xeb, 0xbe, 0x75, 0xf3, 0x07, 0x2a,
+-      0xfb, 0xa2, 0xba, 0xe2, 0x94, 0x85, 0x45, 0x1e, 0x59, 0x7e, 0xc8, 0x3a,
+-      0x1b, 0x95, 0xbe, 0x69, 0x97, 0xf5, 0x4e, 0xe7, 0x3b, 0x2b, 0x36, 0xa9,
+-      0xec, 0x0f, 0x0f, 0xc7, 0xd7, 0x58, 0xf9, 0xf5, 0x6f, 0x56, 0xd9, 0x3d,
+-      0x9a, 0x77, 0x56, 0x5d, 0x6f, 0xf7, 0xd1, 0x56, 0x45, 0xad, 0xcf, 0x33,
+-      0xab, 0xec, 0xfd, 0xed, 0x4f, 0x57, 0xb5, 0x5a, 0x9f, 0xe7, 0x57, 0xd9,
+-      0x3e, 0xf5, 0xee, 0x2a, 0xd5, 0xfa, 0xfc, 0x87, 0x55, 0x76, 0x5e, 0xbe,
+-      0xb4, 0x6a, 0xc9, 0xd5, 0xf7, 0x63, 0xf8, 0xef, 0xff, 0x00, 0x88, 0xf4,
+-      0x23, 0x6f, 0xec, 0x3a, 0x00, 0x00, 0x00 };
++      0xc5, 0x7b, 0x7b, 0x74, 0x1c, 0x55, 0x9a, 0xdf, 0xef, 0x56, 0x3f, 0x54,
++      0xdd, 0x6a, 0xb5, 0x4a, 0x72, 0xdb, 0x6e, 0xed, 0x68, 0xc6, 0x5d, 0xee,
++      0x6a, 0xb9, 0xb1, 0x84, 0x5d, 0x2d, 0xb5, 0xec, 0x66, 0x5d, 0xb1, 0x7b,
++      0x8c, 0xb0, 0x65, 0x10, 0x3b, 0xc2, 0xeb, 0x9d, 0x88, 0x09, 0x27, 0xf4,
++      0x18, 0x19, 0x64, 0x63, 0x40, 0x30, 0x64, 0xa3, 0xd9, 0x25, 0xeb, 0x1a,
++      0xf9, 0x81, 0x1f, 0xad, 0xee, 0xd6, 0xc3, 0xc8, 0xec, 0xd9, 0x13, 0x64,
++      0x49, 0xb6, 0xcc, 0xd0, 0x0f, 0x33, 0xc0, 0xcc, 0x30, 0x27, 0x13, 0x77,
++      0x8c, 0x01, 0x03, 0x63, 0x98, 0xdd, 0x6c, 0x92, 0x99, 0x3d, 0x49, 0xd6,
++      0x07, 0xf3, 0xb0, 0xc1, 0x60, 0x32, 0x43, 0x12, 0xb1, 0xcb, 0x4c, 0xe5,
++      0xfb, 0xaa, 0x25, 0x63, 0x58, 0xb2, 0x9b, 0x6c, 0xfe, 0x88, 0xce, 0xd1,
++      0xe9, 0xee, 0xaa, 0x5b, 0xf7, 0x7e, 0xef, 0xef, 0xf7, 0x7d, 0xf7, 0x56,
++      0x04, 0xf0, 0x62, 0xee, 0xaf, 0x86, 0xfe, 0xe3, 0xfd, 0x03, 0x0f, 0xb7,
++      0xae, 0x88, 0xaf, 0xa0, 0xaf, 0x6d, 0x58, 0xec, 0x74, 0xf2, 0xcd, 0x55,
++      0x02, 0x48, 0xbd, 0x87, 0x7f, 0xd4, 0xdf, 0x57, 0xff, 0x71, 0x8f, 0xc1,
++      0x01, 0x28, 0xf3, 0x34, 0xf1, 0x3f, 0x64, 0xc9, 0x30, 0xd7, 0xac, 0xd7,
++      0x20, 0x3b, 0x8c, 0xc4, 0xda, 0xbb, 0x34, 0x20, 0x99, 0x6f, 0x0e, 0xdd,
++      0x88, 0xdf, 0x58, 0x66, 0xc0, 0x09, 0xbe, 0xfe, 0x55, 0xe3, 0xd3, 0x5d,
++      0x3f, 0x5d, 0xad, 0x7e, 0x34, 0xe1, 0x80, 0xac, 0x18, 0x63, 0x50, 0x9a,
++      0x20, 0x37, 0xd2, 0x33, 0x7f, 0xb6, 0xec, 0x79, 0x27, 0xfc, 0xf3, 0x73,
++      0xc1, 0x74, 0x19, 0x3a, 0x76, 0x67, 0xfb, 0x31, 0x13, 0x07, 0x2e, 0xa6,
++      0x23, 0xfa, 0x6e, 0x20, 0x27, 0x19, 0x91, 0xd0, 0x69, 0x84, 0x30, 0x9d,
++      0x87, 0x59, 0x65, 0x68, 0xd8, 0x5f, 0x0a, 0xe1, 0x52, 0xfa, 0xb7, 0x56,
++      0xc8, 0xd5, 0x8f, 0xb7, 0xe2, 0x90, 0x83, 0xc6, 0x23, 0x08, 0x66, 0x21,
++      0xd7, 0x18, 0x03, 0x28, 0x0c, 0x01, 0x7b, 0xd3, 0x6a, 0x3f, 0xa0, 0xf6,
++      0x14, 0x45, 0xf8, 0xec, 0x09, 0xa8, 0xdd, 0x0d, 0x8e, 0xe6, 0xd4, 0xed,
++      0x42, 0x4d, 0xee, 0x14, 0x90, 0x05, 0x8d, 0x5d, 0x9e, 0xe7, 0xcf, 0x01,
++      0x44, 0xf3, 0x32, 0xce, 0x3b, 0x78, 0x59, 0x83, 0xe4, 0x2c, 0xe0, 0xd4,
++      0x74, 0xec, 0xcd, 0xc2, 0x74, 0x1a, 0x02, 0xbb, 0xe3, 0x11, 0x65, 0x0a,
++      0x7c, 0x3f, 0x84, 0x41, 0x7b, 0x9c, 0x4a, 0x1c, 0x5b, 0xd6, 0x1e, 0xdd,
++      0xb2, 0x8e, 0xe9, 0x55, 0x30, 0x15, 0x35, 0x08, 0x08, 0x0c, 0xea, 0x12,
++      0x92, 0xca, 0xfa, 0x90, 0x13, 0x6a, 0x70, 0x1b, 0xfe, 0x96, 0xf8, 0x4d,
++      0x46, 0x5d, 0xa8, 0x8c, 0x4f, 0xa1, 0x0a, 0x65, 0xa5, 0x22, 0xb1, 0xc9,
++      0xb4, 0x65, 0xbd, 0xa4, 0x39, 0x71, 0x8c, 0x64, 0x33, 0x98, 0xff, 0x5b,
++      0xab, 0x4c, 0x72, 0xd9, 0xa3, 0xcd, 0xaf, 0x2f, 0x63, 0x42, 0xb1, 0xac,
++      0x29, 0xba, 0xb7, 0x2f, 0x3f, 0x2f, 0x63, 0xcb, 0x92, 0x34, 0xcb, 0xba,
++      0x4b, 0xfb, 0x1b, 0x6b, 0xeb, 0xe7, 0xc6, 0xc6, 0xf0, 0xfd, 0x9c, 0x82,
++      0xa7, 0xb2, 0x49, 0xe4, 0xd3, 0x16, 0x1c, 0x86, 0x13, 0x7d, 0x43, 0x21,
++      0xec, 0x2c, 0x74, 0xa0, 0x90, 0x56, 0x53, 0xe7, 0xe9, 0xb9, 0xad, 0x71,
++      0x0d, 0xf7, 0x15, 0x3a, 0x31, 0x93, 0x86, 0xe5, 0x31, 0xb4, 0xb2, 0x47,
++      0x44, 0x71, 0x4f, 0xa1, 0x0b, 0xc5, 0xb4, 0x76, 0x76, 0x50, 0x44, 0x06,
++      0x1a, 0x1c, 0x4e, 0x3c, 0x50, 0x68, 0xc1, 0xfd, 0x85, 0x04, 0x3d, 0x63,
++      0xe1, 0xe6, 0x58, 0x23, 0x8d, 0x6f, 0xc5, 0x93, 0x63, 0x96, 0x15, 0x8d,
++      0x29, 0xe8, 0x2b, 0xe8, 0x98, 0xc9, 0x49, 0x48, 0x1d, 0x73, 0x22, 0x75,
++      0x14, 0xb8, 0xe7, 0x68, 0x2b, 0xa6, 0x72, 0x16, 0xb6, 0xea, 0x83, 0x0d,
++      0x12, 0x5c, 0x48, 0x29, 0x02, 0x2e, 0xcd, 0x8f, 0x6d, 0x4a, 0x85, 0xf6,
++      0xf3, 0x0e, 0x81, 0x1d, 0x47, 0xa3, 0xf8, 0x45, 0xda, 0xc4, 0xcd, 0xed,
++      0x41, 0x0c, 0x14, 0x02, 0x78, 0x23, 0x1d, 0xa0, 0x35, 0x74, 0xbc, 0x9e,
++      0x96, 0x69, 0x9d, 0x16, 0x9c, 0x49, 0xf3, 0x18, 0x1e, 0xeb, 0x43, 0x6f,
++      0xa1, 0x11, 0xe7, 0xd2, 0x41, 0x5a, 0x33, 0x80, 0x57, 0x68, 0xdc, 0xf6,
++      0x82, 0x86, 0xb3, 0x34, 0xae, 0xaf, 0x10, 0xc2, 0xcb, 0x69, 0x1f, 0xd1,
++      0x1a, 0xc0, 0xe9, 0x74, 0x3f, 0x76, 0xa7, 0x9b, 0xcf, 0xde, 0x48, 0x32,
++      0x0c, 0x2d, 0xe0, 0x75, 0xf8, 0xda, 0x5b, 0x56, 0x57, 0xc0, 0x36, 0x13,
++      0x5a, 0x67, 0x7e, 0xdd, 0x7e, 0x0c, 0xa6, 0xcf, 0xcc, 0xf9, 0x89, 0x8e,
++      0x03, 0xb9, 0x59, 0xeb, 0xa7, 0xcb, 0x1a, 0x71, 0x22, 0x0b, 0x3c, 0x39,
++      0x05, 0x4c, 0x65, 0x4d, 0xab, 0xc6, 0xb0, 0xac, 0xc9, 0xf6, 0x16, 0x92,
++      0x97, 0xd6, 0xb3, 0x95, 0x46, 0x3d, 0x55, 0x72, 0x02, 0x47, 0xd5, 0x9e,
++      0x32, 0x24, 0x4c, 0xcc, 0x38, 0xe1, 0x1e, 0x52, 0x3b, 0x27, 0xa0, 0x9e,
++      0xbd, 0x87, 0x3c, 0xe9, 0x58, 0x56, 0xed, 0x36, 0xb1, 0xcb, 0x0a, 0x1a,
++      0x4d, 0xa1, 0x16, 0x87, 0x05, 0x3f, 0xd9, 0x42, 0xba, 0xc5, 0xb2, 0x6a,
++      0x57, 0x5b, 0xd6, 0xb9, 0x76, 0x58, 0x92, 0xa1, 0x9d, 0x2d, 0x41, 0x2b,
++      0x7f, 0x00, 0x6d, 0xe0, 0x34, 0xca, 0x5f, 0xf5, 0x21, 0xd2, 0x17, 0x76,
++      0x44, 0xfa, 0x67, 0xe9, 0xd9, 0x9a, 0x02, 0x99, 0x32, 0xf1, 0xa2, 0x91,
++      0x0d, 0x16, 0x4a, 0x32, 0x9c, 0xc4, 0x4f, 0xcb, 0x90, 0x65, 0x39, 0x35,
++      0x1f, 0x7c, 0x24, 0xdf, 0x8d, 0x87, 0x2d, 0xeb, 0x1d, 0x5d, 0x81, 0x9b,
++      0x74, 0x73, 0xd3, 0xb0, 0x85, 0x49, 0xfd, 0x34, 0xc9, 0x53, 0x20, 0xd5,
++      0x1d, 0xa7, 0x67, 0x02, 0x34, 0x3e, 0x81, 0x8d, 0x43, 0x41, 0x7c, 0x3f,
++      0x2b, 0xe3, 0xa7, 0xcb, 0xa2, 0xa8, 0xa6, 0xb9, 0xbc, 0x24, 0xab, 0x2a,
++      0x92, 0x1f, 0x0a, 0x64, 0x6e, 0x85, 0x8a, 0x3d, 0xa2, 0x70, 0x9e, 0x78,
++      0x0c, 0xe2, 0x07, 0xa5, 0x00, 0x9e, 0x2e, 0x29, 0x38, 0x59, 0x6a, 0xc4,
++      0xa9, 0x92, 0x8e, 0x6c, 0x4e, 0xdd, 0x5f, 0x86, 0x85, 0x1a, 0x32, 0xe7,
++      0x37, 0x26, 0x62, 0xc8, 0xe4, 0x2c, 0x2b, 0x4f, 0x34, 0x7b, 0x89, 0x87,
++      0xd7, 0x27, 0xbe, 0x86, 0xe3, 0x63, 0x4e, 0x84, 0x26, 0x03, 0x78, 0x2a,
++      0xed, 0xc4, 0x75, 0x19, 0xd5, 0x9c, 0x80, 0x16, 0xdd, 0x29, 0xb4, 0xe4,
++      0x72, 0xa1, 0xe6, 0x4c, 0x44, 0x42, 0x2e, 0x21, 0xa1, 0xe9, 0xb8, 0x13,
++      0x5a, 0x31, 0x04, 0x57, 0x93, 0x0c, 0xad, 0x89, 0xdc, 0xc8, 0x2f, 0xc1,
++      0x4d, 0x7e, 0xb1, 0x71, 0x24, 0x4a, 0xd7, 0x02, 0x74, 0x0d, 0x5f, 0xab,
++      0x82, 0x63, 0x91, 0x03, 0x24, 0x37, 0xcd, 0x81, 0xa4, 0xd3, 0xb2, 0x1c,
++      0x5a, 0x2b, 0x7a, 0x1e, 0xa3, 0xcf, 0x36, 0x1e, 0xaf, 0x20, 0x5c, 0x24,
++      0x19, 0x34, 0x11, 0x4d, 0x59, 0xa2, 0x31, 0x4b, 0x34, 0x66, 0x89, 0xc6,
++      0xac, 0x83, 0x6c, 0x46, 0xd5, 0x81, 0x3f, 0x22, 0x5d, 0x85, 0x88, 0xbf,
++      0x5f, 0xd8, 0x7a, 0x7a, 0xba, 0x14, 0x24, 0xfa, 0x43, 0x36, 0xfd, 0x4f,
++      0xe6, 0x04, 0x24, 0x4d, 0xed, 0x3e, 0x8f, 0x75, 0x08, 0xc7, 0xd4, 0xe4,
++      0x04, 0x92, 0xf4, 0x9c, 0xba, 0xdf, 0x84, 0xda, 0x59, 0x26, 0xfd, 0x6f,
++      0x55, 0x12, 0x98, 0xc9, 0xba, 0x50, 0xad, 0xa9, 0x21, 0xd2, 0x57, 0xb4,
++      0x8c, 0x05, 0xb8, 0x57, 0xa1, 0x39, 0x25, 0xb7, 0xa8, 0xc4, 0x90, 0x47,
++      0x10, 0x19, 0x91, 0x30, 0xad, 0x3b, 0xc8, 0x3f, 0x75, 0x38, 0x9a, 0x68,
++      0xb9, 0x62, 0x9c, 0x3e, 0x69, 0xfe, 0x2c, 0xad, 0x45, 0xf4, 0xd0, 0x7c,
++      0xe4, 0x97, 0x2c, 0xc7, 0x28, 0xd1, 0xb0, 0xd7, 0xa6, 0xf7, 0x64, 0xa9,
++      0x4b, 0x54, 0xec, 0xc7, 0x20, 0x7b, 0x51, 0x43, 0x10, 0x6a, 0x34, 0x24,
++      0x54, 0x3d, 0x29, 0x14, 0x4c, 0x95, 0x7e, 0x46, 0x63, 0x02, 0xd7, 0x8c,
++      0xe9, 0xc6, 0x60, 0x56, 0xe0, 0x46, 0xcd, 0xc2, 0x7a, 0xbd, 0x1b, 0xbb,
++      0x4b, 0xf3, 0x7e, 0xc9, 0xb1, 0x4b, 0xf1, 0x4f, 0xa5, 0x3b, 0xb0, 0x27,
++      0x1b, 0xc2, 0xee, 0x7c, 0xd0, 0x3f, 0x99, 0xe6, 0x7b, 0x1a, 0xf9, 0x3b,
++      0xdf, 0x0b, 0x5c, 0x73, 0xaf, 0xf1, 0x9a, 0x7b, 0x09, 0x0c, 0x8e, 0x7e,
++      0x85, 0x62, 0x48, 0x2d, 0x76, 0x6b, 0x1f, 0x91, 0xad, 0x68, 0x89, 0x5e,
++      0x34, 0xe0, 0xbc, 0xd2, 0x82, 0x43, 0xe3, 0x5d, 0xd8, 0x33, 0xbe, 0x02,
++      0x07, 0x46, 0x1b, 0x53, 0x5e, 0x63, 0x88, 0xd6, 0x0f, 0x27, 0x7b, 0x85,
++      0xda, 0xef, 0x10, 0xe1, 0x68, 0x2f, 0xd9, 0x6e, 0x53, 0x9d, 0x65, 0x9d,
++      0x8e, 0x91, 0x6d, 0xeb, 0xcd, 0xfa, 0x46, 0x12, 0x40, 0xb9, 0x5b, 0xed,
++      0x7c, 0x0b, 0x3e, 0xdc, 0x4a, 0x36, 0x37, 0x15, 0x43, 0xaf, 0x03, 0x8e,
++      0x16, 0x1f, 0x7e, 0x6d, 0x1d, 0x75, 0xb2, 0xdc, 0xad, 0x5d, 0x77, 0xe9,
++      0x7b, 0x05, 0xc7, 0x39, 0xf7, 0xd5, 0x58, 0xc2, 0xf3, 0xf3, 0x33, 0x96,
++      0x15, 0xa6, 0x79, 0xfa, 0x62, 0xcd, 0x89, 0x3e, 0xcc, 0x5a, 0xe7, 0xb7,
++      0x74, 0x61, 0xf7, 0xcc, 0x0a, 0x1c, 0x1c, 0x75, 0x21, 0x59, 0x27, 0x50,
++      0xab, 0x85, 0xcb, 0xf7, 0x62, 0x05, 0xcc, 0x29, 0x7e, 0xae, 0x0b, 0x47,
++      0x66, 0x2a, 0xbf, 0xb3, 0x57, 0x7f, 0xcf, 0xcf, 0x77, 0x91, 0x74, 0xca,
++      0xf2, 0xe4, 0x38, 0x49, 0x2a, 0x30, 0x9a, 0x71, 0x62, 0x34, 0x40, 0xba,
++      0xed, 0x10, 0xce, 0xe3, 0x8b, 0xfc, 0xde, 0xc7, 0x2c, 0xbc, 0xa4, 0x93,
++      0x9e, 0xb3, 0x1b, 0x84, 0xf7, 0x78, 0xa7, 0x70, 0x15, 0x37, 0x0b, 0xf7,
++      0xe4, 0xb7, 0x84, 0x7c, 0x3c, 0x25, 0xaa, 0x8a, 0x2d, 0x24, 0xfb, 0x1e,
++      0xe1, 0x39, 0xae, 0x86, 0x42, 0xe2, 0xbb, 0xa4, 0xcf, 0x2d, 0xc2, 0x51,
++      0x84, 0x22, 0x19, 0x03, 0x42, 0x2a, 0xd2, 0x1c, 0xb6, 0x0d, 0xf1, 0x3a,
++      0x41, 0xd2, 0x1b, 0x4c, 0x87, 0xd1, 0x8f, 0xad, 0x94, 0x23, 0x6e, 0x49,
++      0x1b, 0x38, 0x98, 0xad, 0xa2, 0xf8, 0xc8, 0x7e, 0x3f, 0x4b, 0xeb, 0x6a,
++      0x38, 0x54, 0x82, 0xe9, 0x31, 0x0e, 0x62, 0x05, 0xf9, 0xdb, 0xb9, 0x18,
++      0xfb, 0x22, 0x90, 0xcf, 0x86, 0x93, 0x07, 0x85, 0x65, 0x55, 0x45, 0xac,
++      0x25, 0xef, 0xe8, 0xcd, 0xd1, 0x33, 0xf8, 0x9f, 0xd6, 0x44, 0xa0, 0x1f,
++      0xd1, 0x76, 0xc8, 0x55, 0xc6, 0x1e, 0xbc, 0x9b, 0x86, 0xec, 0x36, 0x4c,
++      0xbc, 0x94, 0x06, 0x7c, 0x43, 0x83, 0x8a, 0x17, 0x64, 0x07, 0x08, 0x07,
++      0x0f, 0x09, 0xb5, 0xfb, 0x02, 0xa5, 0xb3, 0x44, 0xbb, 0x39, 0x20, 0x81,
++      0xe2, 0x91, 0x50, 0x7b, 0xce, 0x90, 0x3d, 0x7e, 0x57, 0xa8, 0xca, 0xac,
++      0x60, 0x3f, 0xe5, 0x5c, 0xb2, 0x67, 0x2e, 0xa7, 0x98, 0xb8, 0xee, 0x9a,
++      0x9c, 0x32, 0x48, 0x74, 0xed, 0x23, 0xba, 0x5e, 0xd4, 0xd5, 0xe0, 0x24,
++      0xac, 0x25, 0xbd, 0x3a, 0xdf, 0x33, 0xb0, 0xa7, 0x64, 0x85, 0x1c, 0x06,
++      0xcb, 0x0a, 0xa9, 0x2a, 0x03, 0xa6, 0x6c, 0x28, 0xe4, 0x1b, 0xbf, 0xb1,
++      0x7a, 0xe3, 0xb2, 0xfe, 0x76, 0x5e, 0x21, 0x79, 0xc1, 0xef, 0x2c, 0x7c,
++      0x59, 0xde, 0xb5, 0x20, 0x19, 0xbf, 0xb1, 0xee, 0x8c, 0xc3, 0xbf, 0xa4,
++      0xe0, 0x4c, 0x55, 0x1b, 0xe8, 0x1e, 0x18, 0xda, 0x65, 0x35, 0x68, 0x12,
++      0xc5, 0x29, 0x8d, 0xe2, 0xba, 0x2f, 0x71, 0xb9, 0xdd, 0x23, 0xce, 0xb5,
++      0x07, 0xbb, 0x3e, 0xc8, 0x7b, 0x48, 0xcf, 0xe8, 0xde, 0x59, 0x48, 0x38,
++      0xdf, 0x23, 0x5b, 0x73, 0x53, 0x4c, 0x45, 0xa1, 0xb1, 0xeb, 0x12, 0xe5,
++      0xa1, 0x9b, 0x62, 0x9e, 0x7f, 0xea, 0x36, 0xa4, 0xaf, 0x79, 0xf0, 0xe0,
++      0xca, 0xe9, 0x44, 0x2d, 0xc5, 0x75, 0x05, 0x67, 0xe3, 0x9d, 0x18, 0x2c,
++      0x55, 0x91, 0x1d, 0x3e, 0x53, 0xde, 0xab, 0x35, 0x76, 0xbd, 0x9f, 0x5e,
++      0xc2, 0x71, 0xe4, 0xd3, 0x7c, 0xbb, 0xd6, 0xbd, 0x53, 0x9c, 0xde, 0xe4,
++      0x45, 0x1c, 0x07, 0x4a, 0xb2, 0xfc, 0x49, 0x1a, 0x1f, 0x2d, 0xd1, 0xb4,
++      0xf2, 0x3a, 0x47, 0x53, 0xbf, 0xec, 0x68, 0x1a, 0x70, 0x53, 0x0c, 0xbe,
++      0x78, 0xbd, 0xc0, 0x4b, 0xd7, 0x47, 0x12, 0x6e, 0xe1, 0xc1, 0xf9, 0xee,
++      0x04, 0xd9, 0x49, 0x63, 0xca, 0x63, 0x50, 0xfc, 0x20, 0x93, 0x75, 0x68,
++      0x09, 0xec, 0x9e, 0xc2, 0x23, 0x83, 0x7a, 0x17, 0xcc, 0x19, 0xb6, 0xa1,
++      0x16, 0x0c, 0xce, 0x74, 0xc3, 0x2c, 0x39, 0x30, 0x11, 0x20, 0xe6, 0x4b,
++      0x48, 0xb9, 0x8c, 0x96, 0x8e, 0x89, 0x7c, 0xaf, 0xab, 0xe2, 0xc3, 0xc4,
++      0x7f, 0xf6, 0xa8, 0x1f, 0x5e, 0xd6, 0xf3, 0x59, 0x92, 0x51, 0x0b, 0x9e,
++      0x29, 0x45, 0x29, 0xd6, 0xe9, 0x24, 0x17, 0x8d, 0xe2, 0x45, 0x88, 0xec,
++      0x4b, 0xc6, 0xd6, 0x51, 0xf5, 0x08, 0xc5, 0x85, 0xdc, 0x04, 0xda, 0x91,
++      0x0c, 0x28, 0x94, 0xbb, 0x5f, 0x9a, 0x8b, 0x01, 0xdb, 0xe8, 0x53, 0x35,
++      0x93, 0xc0, 0x19, 0x09, 0x68, 0x6d, 0x30, 0x22, 0xfb, 0x1b, 0x48, 0x1f,
++      0x75, 0x45, 0x0f, 0x1e, 0x18, 0xad, 0xc7, 0xfd, 0xe3, 0x5e, 0xec, 0x18,
++      0xb5, 0x70, 0x39, 0xc6, 0xb6, 0xa1, 0xf6, 0x10, 0x89, 0x1d, 0xd5, 0x24,
++      0xd7, 0x4d, 0xb1, 0x48, 0xc2, 0x23, 0x9c, 0xa8, 0x2a, 0x76, 0x13, 0x06,
++      0x48, 0xb2, 0x5f, 0xe8, 0x34, 0x47, 0x68, 0xb7, 0x7e, 0x2b, 0x52, 0x01,
++      0x19, 0xae, 0xa2, 0x8f, 0x62, 0x09, 0xfb, 0x31, 0xdf, 0xfb, 0x06, 0xb6,
++      0xba, 0x7d, 0x70, 0x64, 0x64, 0xe4, 0x28, 0xff, 0x63, 0x91, 0x1b, 0x9d,
++      0x4d, 0x12, 0xfd, 0x07, 0xfc, 0xd3, 0x63, 0x8d, 0xfe, 0x63, 0x14, 0x5f,
++      0xef, 0xc9, 0x4a, 0xbc, 0x0e, 0xe3, 0x05, 0x9a, 0x5b, 0xc1, 0x93, 0x14,
++      0xab, 0x1f, 0xa2, 0xf8, 0x73, 0xa2, 0x94, 0x17, 0x1c, 0x4f, 0x6c, 0x7e,
++      0xb2, 0xc4, 0x5b, 0x96, 0x78, 0xcb, 0x12, 0x5f, 0x14, 0x17, 0x4e, 0x66,
++      0x99, 0x8f, 0x2b, 0xe4, 0xa3, 0x09, 0xe2, 0xdd, 0x83, 0x6d, 0x44, 0xef,
++      0x83, 0xe3, 0xd5, 0xb8, 0x8f, 0xe8, 0x2d, 0xea, 0x6a, 0xcf, 0x9f, 0x0b,
++      0x0b, 0xf9, 0x98, 0x6a, 0xee, 0x14, 0x5e, 0x48, 0x4d, 0x96, 0xd5, 0xad,
++      0x33, 0xcf, 0x64, 0xa7, 0x92, 0xcd, 0xf3, 0xfe, 0x24, 0x3c, 0xe8, 0xa3,
++      0x67, 0x7a, 0xc7, 0xf1, 0xa9, 0x44, 0x3c, 0x79, 0x88, 0xc7, 0x83, 0xba,
++      0x9a, 0x58, 0x4e, 0x71, 0xfd, 0x82, 0x16, 0x29, 0x5f, 0x70, 0xe0, 0xeb,
++      0x24, 0x0f, 0x9d, 0xe5, 0xd1, 0x44, 0xfc, 0x3c, 0x40, 0x58, 0xc7, 0x6f,
++      0x30, 0x9f, 0x91, 0xe8, 0xaf, 0x89, 0xf7, 0x48, 0x31, 0xe0, 0x3f, 0x77,
++      0xb8, 0xd1, 0xff, 0xe2, 0x50, 0x85, 0xfe, 0x9d, 0x44, 0xff, 0x74, 0xcc,
++      0xc2, 0x21, 0xa2, 0xff, 0x29, 0xa2, 0xbf, 0x8f, 0xe3, 0xf9, 0x1c, 0xfd,
++      0x27, 0x4a, 0xbc, 0xee, 0x97, 0xf1, 0x30, 0x4f, 0x7f, 0x3d, 0xb6, 0x8e,
++      0xcf, 0xcb, 0xcb, 0xb2, 0xee, 0xd4, 0x9f, 0xb5, 0xbe, 0x4d, 0x32, 0x5b,
++      0x52, 0x64, 0xb9, 0x31, 0x8e, 0x8b, 0x1c, 0xb9, 0x07, 0x7d, 0x12, 0xbc,
++      0x3e, 0x2c, 0x28, 0x72, 0x2e, 0x08, 0xe1, 0x59, 0xd2, 0xef, 0x29, 0xca,
++      0x65, 0xcf, 0x94, 0xae, 0xcd, 0x6d, 0xac, 0xeb, 0x31, 0xd2, 0xb1, 0x3a,
++      0x61, 0x52, 0x6c, 0x4b, 0x95, 0x92, 0xd8, 0x3b, 0x8e, 0xe4, 0xb4, 0xfe,
++      0xaf, 0x29, 0xc0, 0x2c, 0x22, 0xfb, 0xaa, 0x4a, 0x2a, 0x9a, 0x17, 0x77,
++      0x4d, 0x05, 0xd0, 0x5f, 0x5a, 0x8f, 0x2c, 0xc5, 0x9b, 0x9d, 0x14, 0x9f,
++      0x3f, 0x8c, 0x25, 0x77, 0xf8, 0x11, 0x21, 0xfd, 0x06, 0x70, 0x2f, 0x3d,
++      0x73, 0x70, 0x9c, 0xe9, 0x57, 0xe6, 0xf4, 0x1c, 0xc0, 0x3d, 0x74, 0x6d,
++      0xdf, 0xb8, 0x8c, 0x17, 0xf4, 0x27, 0x08, 0xcf, 0x54, 0xf0, 0xc5, 0xdd,
++      0x59, 0x28, 0xe4, 0x9e, 0x84, 0xff, 0x22, 0xd1, 0x17, 0xe8, 0xf7, 0xb6,
++      0x92, 0xd7, 0x3f, 0x38, 0x86, 0xef, 0x2d, 0x31, 0xfc, 0x58, 0x40, 0x58,
++      0xec, 0x76, 0x3d, 0x42, 0x76, 0xef, 0xc4, 0x40, 0x49, 0xc2, 0x77, 0xa6,
++      0xbc, 0x78, 0x68, 0xf4, 0x53, 0xcb, 0x1d, 0x77, 0xe2, 0xb6, 0x26, 0x2f,
++      0x1e, 0x9c, 0x4a, 0x62, 0xff, 0x38, 0x42, 0x55, 0xb1, 0x61, 0x8a, 0xdd,
++      0x95, 0x7c, 0x50, 0x4d, 0xbc, 0x1f, 0x18, 0xf7, 0xf9, 0xfb, 0x0e, 0xb3,
++      0x0c, 0xd6, 0x07, 0x3d, 0x40, 0xb9, 0x2a, 0xe6, 0xc0, 0x36, 0xdd, 0xb1,
++      0xa0, 0x8a, 0x0c, 0xfd, 0x09, 0x9a, 0x6f, 0x12, 0x8e, 0x57, 0x97, 0x20,
++      0x72, 0xa4, 0xc1, 0x51, 0xce, 0x2d, 0x40, 0x3d, 0x1e, 0x9a, 0x49, 0x62,
++      0x98, 0x6c, 0xf4, 0x81, 0xd1, 0xc1, 0xef, 0xd5, 0x51, 0x0c, 0xf1, 0xb7,
++      0xaa, 0x7d, 0x6f, 0x08, 0x03, 0xf9, 0x88, 0x07, 0x3b, 0xa7, 0x7c, 0xfe,
++      0x1d, 0x87, 0xad, 0x75, 0x6c, 0x4f, 0xdb, 0x67, 0xea, 0x71, 0xdf, 0x38,
++      0x5d, 0x1b, 0x65, 0x1b, 0x26, 0x5b, 0x8b, 0x54, 0x11, 0x6f, 0xe1, 0xa4,
++      0x87, 0xf0, 0x92, 0x23, 0x56, 0x4d, 0xf2, 0xf0, 0xe0, 0x1e, 0xdb, 0x16,
++      0x14, 0x6c, 0x1b, 0xb7, 0xf0, 0xa6, 0x1e, 0x45, 0x8e, 0xec, 0xfa, 0xc8,
++      0xb8, 0x3a, 0xdb, 0x41, 0x58, 0xe7, 0x6d, 0x87, 0x7a, 0xa4, 0xc9, 0x91,
++      0x44, 0x7d, 0x1b, 0xc5, 0xf8, 0x7a, 0xcb, 0xba, 0xbb, 0xb5, 0xb9, 0xff,
++      0xe7, 0x44, 0x73, 0x9d, 0xb1, 0x08, 0xe5, 0x3a, 0x35, 0x07, 0x34, 0x0f,
++      0xb8, 0xa5, 0xeb, 0x71, 0x7e, 0x21, 0xc7, 0x41, 0x8e, 0xe5, 0x01, 0x7f,
++      0x7d, 0xa6, 0x92, 0xe3, 0xea, 0x8b, 0x8d, 0xfe, 0xba, 0x4c, 0xd0, 0x5f,
++      0x57, 0x84, 0xdf, 0x5d, 0x04, 0x7e, 0x4c, 0xf1, 0x65, 0x41, 0xdb, 0x6f,
++      0xac, 0x54, 0xbd, 0x8d, 0x07, 0xfd, 0xcf, 0x8f, 0xa9, 0x66, 0x19, 0xea,
++      0x7e, 0x0a, 0x9b, 0x78, 0x7c, 0xc6, 0xe9, 0x3f, 0x4e, 0xd8, 0xaf, 0x5e,
++      0x8b, 0x62, 0x1f, 0xe9, 0x73, 0x17, 0xd9, 0xc2, 0xaf, 0xdb, 0x80, 0x03,
++      0x99, 0x70, 0x48, 0x17, 0x3d, 0x34, 0x31, 0xb0, 0xa7, 0x48, 0x31, 0x5f,
++      0x4a, 0x52, 0x10, 0x53, 0xa3, 0x94, 0xd6, 0x90, 0xce, 0xb8, 0x60, 0x2e,
++      0xac, 0xe8, 0xe4, 0xbe, 0xec, 0x29, 0xcb, 0xaf, 0x69, 0x13, 0x45, 0xd2,
++      0xd9, 0xc3, 0x25, 0x1f, 0x06, 0x08, 0x0f, 0x2c, 0x20, 0x0c, 0xf9, 0x20,
++      0xd9, 0xc5, 0x03, 0xa3, 0x0e, 0xa2, 0x8f, 0xc7, 0x25, 0x91, 0x5c, 0x54,
++      0xc1, 0xa2, 0x0f, 0x4d, 0xb1, 0x5d, 0x92, 0x1d, 0x91, 0x2d, 0x3e, 0x4b,
++      0x39, 0xff, 0x99, 0xcf, 0x61, 0x10, 0x55, 0x31, 0xaf, 0xe6, 0xfe, 0x8a,
++      0x3c, 0x06, 0xc7, 0x99, 0x67, 0xf5, 0x08, 0xa4, 0x24, 0x6e, 0xd2, 0x7f,
++      0x49, 0x39, 0x81, 0x79, 0x27, 0x0c, 0x3c, 0x1e, 0xc5, 0xa3, 0x59, 0xc2,
++      0x34, 0xb1, 0xcb, 0xd6, 0x3d, 0x01, 0x96, 0x01, 0xf3, 0xb3, 0xca, 0xc1,
++      0xf9, 0xb3, 0x9e, 0xb0, 0xef, 0xff, 0xbb, 0xdd, 0xdd, 0x65, 0xa5, 0x6c,
++      0x2c, 0x4b, 0x18, 0x9b, 0xec, 0x29, 0x75, 0xd5, 0x7e, 0x1e, 0xb4, 0xce,
++      0x07, 0x38, 0x5f, 0xd7, 0x23, 0x75, 0xd5, 0x16, 0xd8, 0x96, 0xb0, 0x44,
++      0x6f, 0xdd, 0xfd, 0xa0, 0x02, 0xb6, 0x87, 0xe8, 0x35, 0xf6, 0x50, 0x45,
++      0x34, 0x29, 0xd8, 0x31, 0xc3, 0xf6, 0x6b, 0x5d, 0x59, 0x62, 0xfc, 0xd6,
++      0xfa, 0x64, 0xb5, 0x76, 0xe4, 0x97, 0xe8, 0xa2, 0xeb, 0x01, 0x7c, 0x87,
++      0xfc, 0xe8, 0x5e, 0xe2, 0x73, 0x47, 0xfb, 0xbd, 0xb6, 0xdf, 0xee, 0x28,
++      0xad, 0xa1, 0xeb, 0x2c, 0xef, 0x0e, 0xec, 0xcf, 0xea, 0x48, 0x67, 0xcb,
++      0x9c, 0x87, 0xc8, 0xe6, 0xe3, 0xf8, 0x11, 0xc5, 0xd9, 0x67, 0x4b, 0x8c,
++      0xc9, 0x12, 0x36, 0x1e, 0xfb, 0x61, 0xa9, 0x05, 0xcf, 0x91, 0x4f, 0x3e,
++      0x43, 0x31, 0xf7, 0x07, 0x36, 0x4e, 0x73, 0x8a, 0x43, 0x69, 0xc2, 0xa4,
++      0x43, 0x26, 0xd2, 0xf9, 0x10, 0x3c, 0x87, 0xc3, 0xfb, 0x77, 0x08, 0xf5,
++      0xc7, 0x24, 0x2f, 0xff, 0x81, 0xe9, 0xa5, 0xa8, 0x3a, 0xac, 0x4e, 0x10,
++      0xdd, 0xfe, 0x47, 0xa7, 0x35, 0xc2, 0xd4, 0x41, 0xff, 0xbe, 0xbc, 0xe2,
++      0xdf, 0x3b, 0x16, 0xf0, 0xef, 0x9d, 0xae, 0x27, 0x3f, 0x5a, 0xe4, 0x1f,
++      0x9c, 0x0e, 0xfa, 0x77, 0xa7, 0x1b, 0xfd, 0xbb, 0xf3, 0x6d, 0x08, 0xd5,
++      0xc3, 0x5c, 0x44, 0x39, 0xe2, 0xbe, 0xd1, 0x6f, 0x62, 0xa2, 0xae, 0x12,
++      0xf7, 0xfb, 0xc9, 0x36, 0x6a, 0xc9, 0x0e, 0x57, 0x4a, 0xb7, 0xa1, 0xbc,
++      0xb0, 0x72, 0xed, 0x3b, 0x74, 0xed, 0xa1, 0x56, 0xf8, 0xff, 0xc2, 0x8e,
++      0xbd, 0xc0, 0x73, 0x64, 0x6b, 0xcf, 0xb6, 0x52, 0x5d, 0x79, 0xd5, 0xd6,
++      0x9c, 0x14, 0x6f, 0x2d, 0x4b, 0x6f, 0x13, 0x08, 0xb6, 0x6e, 0x00, 0x16,
++      0xcc, 0xd7, 0x92, 0xc9, 0x09, 0x67, 0x6b, 0x12, 0x4b, 0xb4, 0x8d, 0x78,
++      0x42, 0xa1, 0x54, 0xd3, 0xfa, 0x75, 0xcc, 0x3d, 0x83, 0xef, 0x8c, 0x7a,
++      0x90, 0xda, 0xac, 0x60, 0x9a, 0xb0, 0xca, 0x76, 0x9a, 0x7f, 0x59, 0xac,
++      0x59, 0x99, 0x21, 0x3d, 0x24, 0x15, 0xbe, 0x46, 0x3e, 0xd1, 0xba, 0x8a,
++      0x7c, 0xa2, 0xb2, 0xfe, 0xd3, 0xa4, 0xaf, 0xdc, 0x4c, 0x14, 0x7b, 0x4b,
++      0x3f, 0x91, 0x2a, 0xf9, 0x45, 0x9d, 0x48, 0xe2, 0xac, 0x3d, 0xf6, 0xe9,
++      0xec, 0x1b, 0x56, 0xc8, 0xb6, 0x3b, 0x81, 0xc7, 0x56, 0x44, 0xf6, 0xff,
++      0x27, 0xa9, 0x81, 0xf8, 0x22, 0xd9, 0x65, 0xed, 0x3a, 0xb2, 0x76, 0xb1,
++      0xf6, 0x2f, 0xf0, 0x23, 0x85, 0x65, 0x3b, 0x20, 0xf6, 0x53, 0xbd, 0x4a,
++      0xa5, 0x53, 0xed, 0x02, 0xed, 0x30, 0x9e, 0xe9, 0xe6, 0x6b, 0x01, 0xff,
++      0x81, 0xb1, 0xa4, 0x14, 0xd0, 0xa0, 0xb8, 0x8c, 0x0e, 0x71, 0x60, 0x7a,
++      0x91, 0xff, 0xd1, 0xb1, 0x0d, 0xe2, 0xd1, 0xe9, 0x46, 0xff, 0x60, 0xba,
++      0x53, 0x0c, 0xe6, 0x37, 0x0b, 0x73, 0xe2, 0x5b, 0xc2, 0x9c, 0x4e, 0x09,
++      0x33, 0xdf, 0x43, 0x9f, 0x5b, 0xc4, 0x58, 0x7e, 0x40, 0xec, 0xcd, 0xf3,
++      0xfc, 0xa4, 0x2b, 0x5a, 0xe3, 0x87, 0x14, 0x7b, 0x9f, 0xa3, 0xd8, 0xfb,
++      0x2c, 0xc5, 0xde, 0x67, 0xc8, 0xde, 0x7f, 0x70, 0x15, 0xe3, 0xb2, 0x8d,
++      0x27, 0x19, 0x9b, 0xf8, 0xff, 0xbc, 0x78, 0x86, 0xf4, 0xcd, 0xb2, 0xfb,
++      0x37, 0x64, 0xdb, 0x2c, 0x93, 0x87, 0x38, 0x57, 0x90, 0x9e, 0xde, 0xb7,
++      0x6d, 0xf9, 0xb1, 0x15, 0x8c, 0xa5, 0x06, 0xc4, 0x56, 0xa2, 0x2f, 0xe9,
++      0x24, 0x0c, 0xa4, 0x11, 0x3e, 0xc9, 0x0e, 0x88, 0xbb, 0xf3, 0x7c, 0xfd,
++      0x20, 0x76, 0x52, 0x4d, 0x78, 0x28, 0x16, 0xee, 0xee, 0x25, 0xec, 0xb4,
++      0x89, 0xb0, 0xd3, 0xb2, 0x98, 0x8c, 0x8b, 0x2d, 0x9f, 0x58, 0x58, 0x88,
++      0xe4, 0xfd, 0x71, 0x75, 0x62, 0xa2, 0x92, 0x6f, 0x73, 0x19, 0x70, 0xdd,
++      0x8e, 0xda, 0x1a, 0x4d, 0x3d, 0x91, 0x44, 0x78, 0x7f, 0x5c, 0x82, 0xe9,
++      0x36, 0x5c, 0xb8, 0xcf, 0xae, 0x15, 0xd7, 0x63, 0x74, 0x54, 0x60, 0x5b,
++      0x6b, 0xf2, 0x8f, 0x5c, 0x24, 0xab, 0xb7, 0xdb, 0x11, 0x20, 0xf5, 0x0a,
++      0x99, 0xea, 0xfa, 0x4e, 0x92, 0x5e, 0x07, 0xe5, 0xdc, 0x27, 0xb2, 0xab,
++      0xd0, 0xd0, 0x2a, 0x93, 0x0e, 0x9d, 0xb8, 0xb3, 0x78, 0x13, 0xe9, 0x31,
++      0x72, 0xe4, 0x79, 0x78, 0xfd, 0x2f, 0x8c, 0x19, 0x18, 0xca, 0xe2, 0x7b,
++      0x3e, 0xaa, 0xe1, 0xee, 0x25, 0xfc, 0xf4, 0x03, 0xa2, 0x61, 0x63, 0x6b,
++      0xa4, 0x93, 0x6a, 0x79, 0xc5, 0x6b, 0xb8, 0x31, 0xd2, 0xe4, 0x87, 0xa2,
++      0xa5, 0xc4, 0x2b, 0xf9, 0xc8, 0x91, 0x1d, 0xd2, 0xb7, 0xc4, 0xcf, 0xa7,
++      0x0d, 0x3c, 0x5a, 0xea, 0x11, 0x7f, 0x31, 0x2d, 0x83, 0x74, 0x43, 0x71,
++      0x4b, 0xc7, 0x11, 0xa2, 0xcb, 0x45, 0x18, 0xc9, 0xf5, 0xfb, 0x02, 0x8b,
++      0xb5, 0x24, 0xbe, 0xb3, 0x8a, 0x7d, 0xa1, 0x12, 0xd3, 0x9c, 0xab, 0x80,
++      0xfd, 0x64, 0x93, 0x0d, 0x99, 0x0e, 0xb1, 0x84, 0xbe, 0x5f, 0xa4, 0xbc,
++      0x96, 0x94, 0x3a, 0x45, 0x03, 0x61, 0xd3, 0x85, 0x93, 0x5b, 0xc4, 0x82,
++      0x22, 0x63, 0x51, 0x28, 0x0b, 0x49, 0x46, 0x0b, 0x8b, 0x17, 0x1d, 0x95,
++      0x1a, 0xc0, 0xc5, 0xb6, 0x64, 0xfa, 0x0c, 0xd9, 0x7f, 0x88, 0x62, 0xfb,
++      0x8e, 0x58, 0x27, 0xe1, 0x64, 0xbe, 0x3e, 0x20, 0x86, 0x48, 0x8e, 0x13,
++      0x2e, 0xdb, 0x76, 0xfc, 0x4f, 0x8c, 0xc1, 0xd5, 0x60, 0x20, 0xe4, 0xa6,
++      0xdc, 0xf1, 0xdf, 0xdb, 0x22, 0xe6, 0xf3, 0x52, 0x97, 0xc8, 0xe5, 0x03,
++      0xfe, 0x23, 0x63, 0x9c, 0x67, 0x3a, 0xc4, 0x11, 0xd2, 0x79, 0x96, 0x74,
++      0x9e, 0x25, 0x9d, 0x67, 0x48, 0xe7, 0x99, 0x2f, 0xd1, 0xf9, 0x3e, 0xd2,
++      0xf9, 0xee, 0xfc, 0xaf, 0x6c, 0x1d, 0x3a, 0x0d, 0x03, 0x59, 0xca, 0xcb,
++      0x23, 0x4d, 0x15, 0xfe, 0x3e, 0x24, 0x59, 0xbc, 0x14, 0xfb, 0x86, 0x13,
++      0x5e, 0x83, 0x62, 0x6b, 0x17, 0x3d, 0xf3, 0x95, 0x39, 0x1b, 0x57, 0xfc,
++      0xc3, 0x63, 0x1d, 0x62, 0x98, 0xfc, 0x6e, 0x84, 0xe6, 0x1f, 0x21, 0xbf,
++      0x1b, 0x4c, 0xff, 0x9f, 0xd8, 0x0d, 0xdb, 0x1d, 0x4c, 0x2f, 0xe5, 0xad,
++      0x6a, 0xb2, 0x4b, 0xa7, 0xc1, 0x36, 0xb4, 0x59, 0x24, 0x8f, 0x7e, 0x4b,
++      0x24, 0x8f, 0xa5, 0x44, 0xb2, 0xd0, 0x43, 0x9f, 0x5b, 0xc4, 0x2d, 0x76,
++      0x1d, 0x3a, 0x20, 0x3a, 0x0a, 0x01, 0xff, 0x38, 0xad, 0x33, 0x4e, 0x7c,
++      0x3c, 0x46, 0xeb, 0x3c, 0x66, 0xdb, 0x2e, 0x15, 0x99, 0x5e, 0x5e, 0x8b,
++      0xed, 0x8c, 0xed, 0xeb, 0x32, 0xd1, 0xce, 0xbe, 0x71, 0xb5, 0xc7, 0x43,
++      0x7f, 0x37, 0x38, 0xa0, 0xed, 0x74, 0x56, 0x78, 0xe2, 0xdc, 0xcf, 0xb9,
++      0x9e, 0xe3, 0xb0, 0x62, 0xd7, 0x82, 0xcf, 0x5e, 0xc5, 0x00, 0x8c, 0x07,
++      0x20, 0x2f, 0x30, 0xb6, 0x18, 0xdf, 0x69, 0xfa, 0x1f, 0x34, 0x5f, 0x3f,
++      0xf4, 0x55, 0x90, 0x03, 0xc6, 0x5f, 0x1a, 0x63, 0x4d, 0x14, 0xa7, 0x69,
++      0x4e, 0x39, 0x03, 0x68, 0x19, 0x81, 0xdd, 0x09, 0x41, 0x38, 0x76, 0x11,
++      0xf9, 0x25, 0xd3, 0xaf, 0x76, 0x52, 0x36, 0xc1, 0xd2, 0x21, 0xc8, 0x4b,
++      0x8c, 0x9d, 0xb0, 0xb2, 0x90, 0x6b, 0x8d, 0x3e, 0x5c, 0x19, 0x0a, 0x07,
++      0x3b, 0xa1, 0xa6, 0x2e, 0x38, 0xd4, 0x32, 0xe5, 0xb7, 0xfe, 0xdd, 0x42,
++      0xed, 0x9b, 0x15, 0xdc, 0x27, 0x62, 0xec, 0xbe, 0x13, 0x2d, 0x36, 0x86,
++      0xef, 0x43, 0x73, 0x1e, 0x54, 0x87, 0x0b, 0xbc, 0x43, 0x73, 0xbe, 0xa8,
++      0x7f, 0xc0, 0x39, 0x21, 0x49, 0x58, 0xf0, 0x0b, 0x73, 0x81, 0x70, 0x0c,
++      0xcf, 0xc3, 0x73, 0x84, 0x95, 0x3e, 0x9a, 0xf7, 0x4d, 0x47, 0x73, 0xff,
++      0xa0, 0x50, 0x13, 0x5f, 0x9c, 0x6f, 0x59, 0x1e, 0x62, 0x59, 0xc6, 0xb4,
++      0xaa, 0x35, 0x2f, 0xe3, 0x21, 0xe9, 0x1d, 0x4d, 0x4b, 0xbe, 0x86, 0x10,
++      0x96, 0x51, 0x9d, 0x1c, 0x2d, 0x32, 0x0f, 0xbb, 0x70, 0x46, 0x57, 0xbb,
++      0xa9, 0x1a, 0xa5, 0xba, 0xa5, 0x03, 0x07, 0x29, 0xf6, 0x3e, 0x5a, 0xe2,
++      0x3e, 0xd7, 0x80, 0x58, 0x3e, 0x44, 0x7e, 0x69, 0xdb, 0x13, 0xe4, 0x06,
++      0xe3, 0x61, 0xdc, 0x40, 0xeb, 0xfb, 0xa9, 0xf6, 0x79, 0x9d, 0xd6, 0x97,
++      0x32, 0xea, 0x00, 0xad, 0x9f, 0x7a, 0x43, 0x84, 0x67, 0x89, 0xaf, 0x9e,
++      0x75, 0x8e, 0xe6, 0xbe, 0x5d, 0x42, 0x4d, 0x12, 0xe9, 0xe4, 0xc7, 0xbc,
++      0xf6, 0xc3, 0xcc, 0x0b, 0x7d, 0x52, 0x9d, 0x43, 0x76, 0xd4, 0x54, 0x90,
++      0x45, 0x64, 0x78, 0x3d, 0xf6, 0x4e, 0xad, 0xc7, 0x1e, 0xf2, 0xc7, 0x03,
++      0x7a, 0x2d, 0x42, 0x75, 0xa8, 0xa9, 0xd5, 0x30, 0x7b, 0x41, 0x13, 0x8e,
++      0x1d, 0x2d, 0x8d, 0x64, 0xc7, 0xa7, 0x1b, 0xaa, 0xf0, 0x91, 0xd5, 0xab,
++      0xad, 0xef, 0xa4, 0x88, 0x78, 0x83, 0x07, 0xe3, 0x0e, 0xf2, 0xef, 0x5f,
++      0xfc, 0x9a, 0x02, 0xaa, 0xc7, 0x60, 0xdc, 0x96, 0x10, 0x97, 0xf2, 0x67,
++      0x9d, 0x15, 0x3f, 0x68, 0xc2, 0x15, 0x05, 0xb5, 0x41, 0x6d, 0x39, 0x66,
++      0x15, 0x99, 0xe2, 0x85, 0x69, 0xd7, 0x64, 0x37, 0xe7, 0xba, 0xd1, 0x40,
++      0xf5, 0xf1, 0x9d, 0xb1, 0x5f, 0x5b, 0x9f, 0x2c, 0xe6, 0xe7, 0x4e, 0x7a,
++      0x2a, 0xb1, 0xf3, 0xcb, 0xe6, 0x88, 0x53, 0xbc, 0x69, 0xa6, 0x7a, 0xb6,
++      0x9a, 0x82, 0x74, 0x27, 0xe5, 0x23, 0xb5, 0x27, 0x4d, 0xf5, 0x68, 0x5f,
++      0xa4, 0x59, 0x77, 0x08, 0x37, 0xca, 0x81, 0x70, 0x7f, 0x2f, 0x92, 0xdb,
++      0xfd, 0x73, 0x74, 0x3c, 0x2b, 0x34, 0x17, 0x3d, 0xc7, 0xf3, 0x5c, 0x63,
++      0x4f, 0x27, 0xc9, 0x9e, 0xf8, 0x3e, 0x7f, 0xbf, 0x7a, 0x5f, 0xfe, 0x8a,
++      0xf1, 0x97, 0xff, 0xe4, 0x8f, 0x97, 0x7d, 0xd9, 0xf5, 0x8f, 0xbf, 0xe4,
++      0xfa, 0xff, 0xae, 0xae, 0x2f, 0xd7, 0x39, 0x6d, 0xcc, 0x90, 0x94, 0xb8,
++      0x8f, 0xe9, 0x34, 0x2e, 0xaf, 0xd9, 0xa3, 0xfd, 0x0e, 0xc5, 0x34, 0xee,
++      0x63, 0x70, 0x9e, 0x3e, 0x6f, 0xf7, 0x31, 0x4e, 0x7d, 0x0e, 0xb3, 0x72,
++      0x6c, 0xf1, 0x88, 0xea, 0x11, 0xd3, 0xaa, 0xd7, 0xbe, 0x4d, 0x75, 0xcd,
++      0x2e, 0xf4, 0xc6, 0x74, 0x0c, 0x67, 0xd5, 0xee, 0xdb, 0xa0, 0x25, 0x37,
++      0x0b, 0x9a, 0xa8, 0xe8, 0x11, 0x8e, 0x91, 0xb9, 0x7b, 0xba, 0x49, 0xb5,
++      0x5a, 0x19, 0x55, 0x14, 0x9b, 0x9c, 0x9a, 0x22, 0xa3, 0x18, 0x90, 0x9d,
++      0xc5, 0xa0, 0xec, 0x2e, 0x36, 0xca, 0x55, 0x34, 0xce, 0x37, 0xa2, 0xce,
++      0xde, 0x86, 0x5d, 0x98, 0x6d, 0xf3, 0x9a, 0x0d, 0x86, 0xaa, 0x34, 0x38,
++      0x76, 0x61, 0x4f, 0x8c, 0x9f, 0xed, 0xa0, 0x9a, 0x0d, 0xa2, 0x2e, 0x43,
++      0xc8, 0xd8, 0x10, 0xd8, 0xdb, 0xae, 0x0e, 0x2c, 0x95, 0xb4, 0xce, 0x5f,
++      0x09, 0xa7, 0xec, 0x29, 0x42, 0xf8, 0x33, 0x12, 0x8e, 0xb4, 0xc3, 0xe3,
++      0x59, 0xa5, 0xf6, 0x9d, 0x16, 0x03, 0x78, 0x2a, 0x16, 0xe9, 0xde, 0x26,
++      0x42, 0xb2, 0x97, 0xee, 0xb9, 0x32, 0x14, 0x7f, 0x33, 0xa6, 0xc7, 0xb5,
++      0x4a, 0x0d, 0x4a, 0x22, 0x89, 0x5e, 0x4d, 0xd3, 0x47, 0x20, 0xd3, 0x9a,
++      0x10, 0x55, 0x19, 0x75, 0xf6, 0x4d, 0xc2, 0x54, 0x9f, 0x2c, 0x1b, 0x40,
++      0x6b, 0x5b, 0x64, 0x7f, 0x8f, 0xa4, 0xc9, 0x84, 0xf5, 0x84, 0x33, 0xe3,
++      0xc3, 0xca, 0xc3, 0xf3, 0x7d, 0x1d, 0xcb, 0xfa, 0x30, 0x56, 0x26, 0xbd,
++      0x40, 0xae, 0x29, 0x46, 0x65, 0x1f, 0xe1, 0xfa, 0xe6, 0xc3, 0x8c, 0xb3,
++      0x2c, 0x6b, 0x47, 0xac, 0xfc, 0x75, 0x2f, 0x5a, 0x88, 0xc7, 0x6e, 0x4c,
++      0xa5, 0x19, 0x77, 0x19, 0x98, 0xa4, 0x9a, 0x48, 0x1b, 0x6a, 0xc4, 0x71,
++      0x8a, 0x43, 0x33, 0x69, 0xee, 0xff, 0xf4, 0x91, 0x8c, 0x7b, 0x88, 0xfe,
++      0x2d, 0x54, 0x0f, 0xa7, 0x28, 0x7e, 0xb1, 0x8c, 0x7b, 0xc9, 0xee, 0x21,
++      0x7b, 0x8d, 0x3a, 0xe3, 0xe6, 0x61, 0xc8, 0x1e, 0xc3, 0x6b, 0x5c, 0x77,
++      0x18, 0x75, 0x94, 0xf7, 0x0d, 0xaa, 0x78, 0x10, 0x8d, 0x44, 0xf4, 0x8b,
++      0x88, 0x04, 0x5f, 0x24, 0x7d, 0x0c, 0x6a, 0xc0, 0x6e, 0xbb, 0xd6, 0x76,
++      0xc2, 0xcc, 0x73, 0x0d, 0x0d, 0x4f, 0x55, 0x7b, 0x1d, 0xde, 0xc9, 0x45,
++      0xed, 0x1e, 0x92, 0x49, 0xf5, 0xcf, 0x0b, 0xba, 0x9a, 0x9a, 0xa0, 0xe7,
++      0xb6, 0x2a, 0xff, 0x65, 0x5f, 0x75, 0x1c, 0x32, 0xc5, 0x34, 0xb2, 0xbd,
++      0x3f, 0xf5, 0xbe, 0x49, 0x36, 0x7a, 0xfb, 0xd8, 0x9f, 0x79, 0xaf, 0xc4,
++      0x27, 0xbc, 0x1f, 0xc4, 0x2d, 0x2b, 0x41, 0x78, 0xb4, 0x87, 0xea, 0xed,
++      0x0f, 0x87, 0x4c, 0xef, 0xc5, 0x38, 0xf7, 0x81, 0x9d, 0xf8, 0x3d, 0xfa,
++      0xfd, 0xe4, 0x90, 0x8c, 0x4d, 0x85, 0x06, 0xb8, 0x86, 0x1d, 0x98, 0xd2,
++      0x6f, 0x44, 0xaf, 0x22, 0xe1, 0xee, 0xe8, 0x49, 0xb2, 0x49, 0x89, 0xc6,
++      0x1c, 0xa2, 0xdf, 0xdc, 0xd3, 0x7a, 0x0c, 0xdb, 0x94, 0x69, 0xef, 0x3b,
++      0x71, 0xa6, 0x17, 0x4c, 0xaf, 0x2c, 0x69, 0xb7, 0x62, 0xeb, 0x6d, 0x5c,
++      0x5b, 0xd9, 0xff, 0x9e, 0x17, 0xdb, 0xeb, 0x71, 0x3c, 0xd7, 0x80, 0xe7,
++      0x73, 0xa6, 0xe7, 0xb5, 0xf6, 0x28, 0xfa, 0x86, 0x2c, 0xbc, 0xac, 0x9b,
++      0x03, 0x55, 0x64, 0xe7, 0x09, 0xaa, 0xaf, 0xc2, 0x6d, 0xdc, 0x4b, 0x40,
++      0xc4, 0x81, 0x48, 0x3f, 0x81, 0xcc, 0x3b, 0x28, 0x74, 0xa5, 0x6a, 0xa8,
++      0x4e, 0x3b, 0x27, 0x2c, 0xf7, 0xf6, 0x76, 0x27, 0xd1, 0x00, 0x6c, 0x28,
++      0xb4, 0x90, 0xdc, 0xa2, 0xd8, 0x14, 0x91, 0xb1, 0xb1, 0xa0, 0xe3, 0xf9,
++      0xb4, 0x0f, 0xb7, 0x17, 0xe2, 0x84, 0xbd, 0x15, 0xa2, 0x3d, 0x81, 0x52,
++      0x3a, 0x80, 0x6f, 0x14, 0x1a, 0x49, 0xde, 0x41, 0xdc, 0x58, 0x08, 0xe1,
++      0x44, 0x9a, 0xf3, 0xb7, 0xe1, 0xd9, 0x1a, 0x6f, 0x44, 0x67, 0x41, 0xc3,
++      0x74, 0x1a, 0x9e, 0x07, 0xe2, 0x21, 0x74, 0x14, 0xa2, 0x28, 0x10, 0x86,
++      0xbb, 0x95, 0xe6, 0xbc, 0x9d, 0x74, 0xd2, 0x52, 0x08, 0x60, 0x69, 0x84,
++      0x22, 0x72, 0xc1, 0x27, 0x06, 0x08, 0x5b, 0x25, 0x0a, 0xf5, 0xb8, 0x38,
++      0xcc, 0x76, 0xae, 0x18, 0x7b, 0x72, 0x0a, 0x42, 0x05, 0xac, 0x94, 0x01,
++      0x0a, 0xd6, 0x91, 0x54, 0x81, 0xe8, 0x3d, 0xd8, 0x5e, 0xe9, 0xe1, 0x2e,
++      0x2f, 0x7c, 0xc6, 0x6f, 0x2d, 0xe9, 0xe9, 0xca, 0xe1, 0x69, 0xef, 0x27,
++      0x71, 0x8e, 0x4d, 0x9f, 0xae, 0x79, 0xfd, 0x30, 0x10, 0x1d, 0x67, 0xde,
++      0xec, 0xd8, 0xc8, 0xf1, 0xb0, 0x45, 0xc6, 0xaf, 0x2c, 0xaa, 0x41, 0x43,
++      0x53, 0xbc, 0x57, 0xa0, 0xf9, 0x88, 0x0e, 0x05, 0x49, 0x5a, 0xfb, 0x96,
++      0xc2, 0x0f, 0xad, 0xad, 0x0b, 0x83, 0xb8, 0x39, 0x52, 0x91, 0xd5, 0x39,
++      0xd2, 0xe1, 0xe4, 0x70, 0x03, 0x66, 0x88, 0x06, 0x97, 0xe1, 0x36, 0x8e,
++      0x8d, 0x59, 0xd8, 0xa0, 0x9b, 0xde, 0xd7, 0xda, 0x97, 0xe3, 0xfe, 0xc3,
++      0x83, 0x67, 0xdd, 0xa4, 0xd7, 0x59, 0xfd, 0x0e, 0x3c, 0x3a, 0x8e, 0xaf,
++      0x35, 0x00, 0x8f, 0x04, 0xc1, 0x3d, 0x6b, 0x35, 0x74, 0x02, 0x91, 0xce,
++      0x07, 0x10, 0x51, 0x34, 0xa1, 0xea, 0x2f, 0x0b, 0x24, 0xab, 0x8d, 0xc8,
++      0xd9, 0x5b, 0x80, 0x33, 0x6e, 0xf2, 0xe0, 0xdb, 0x0b, 0x4e, 0x92, 0x51,
++      0x10, 0xa5, 0x61, 0x37, 0x1c, 0xe4, 0x27, 0x97, 0x34, 0x6c, 0xa8, 0x25,
++      0x59, 0x3b, 0x84, 0x4c, 0x7a, 0x6e, 0xc1, 0xb1, 0xa1, 0x79, 0x59, 0xf9,
++      0x70, 0x13, 0xc9, 0xf0, 0xa9, 0x21, 0x6b, 0x97, 0x16, 0x0b, 0x90, 0xac,
++      0x15, 0xa2, 0x6f, 0x5e, 0x4e, 0x2c, 0xbf, 0x79, 0x39, 0xdd, 0x81, 0x3d,
++      0x33, 0x2c, 0xb7, 0xff, 0x1b, 0x79, 0x4d, 0xdb, 0x76, 0xb7, 0x61, 0x2c,
++      0x8a, 0x86, 0xc3, 0x57, 0x65, 0xc7, 0xf4, 0x3d, 0x42, 0x7c, 0x7c, 0xcf,
++      0xbf, 0x3a, 0xd2, 0xf7, 0xbe, 0xf0, 0x11, 0x3d, 0x0a, 0xe9, 0xe6, 0x03,
++      0x17, 0x63, 0x77, 0x92, 0xc9, 0x55, 0x19, 0x07, 0x49, 0xc6, 0xc1, 0x71,
++      0x96, 0xf5, 0xa7, 0x6b, 0xae, 0x90, 0x7c, 0x5f, 0x27, 0x5c, 0x76, 0x43,
++      0x2c, 0x8a, 0x9a, 0xc3, 0x6a, 0xb2, 0xc1, 0x11, 0x4e, 0xd4, 0x0a, 0x50,
++      0x55, 0x82, 0x96, 0x1a, 0x7c, 0xc8, 0x72, 0xd6, 0x49, 0xce, 0xdf, 0x1b,
++      0x24, 0x7e, 0xd6, 0xd3, 0x7c, 0x1b, 0x48, 0xce, 0x49, 0xe2, 0xff, 0x16,
++      0x7b, 0xde, 0x46, 0x9a, 0x77, 0x0b, 0xd5, 0x1e, 0xd3, 0xde, 0x4b, 0x44,
++      0x4f, 0xf4, 0x33, 0x5a, 0x08, 0x8d, 0x47, 0x82, 0xef, 0x53, 0x8d, 0x7d,
++      0xa3, 0x3d, 0x4e, 0xa1, 0x71, 0x4c, 0xfb, 0xcf, 0xab, 0x24, 0xed, 0xcb,
++      0xfa, 0xcd, 0xdf, 0x02, 0xf7, 0x1c, 0x4c, 0xf4, 0x50, 0x1d, 0xb1, 0x85,
++      0x6a, 0x25, 0x99, 0x72, 0x9b, 0x89, 0x1f, 0xc4, 0xd5, 0x68, 0x9d, 0xe0,
++      0xf8, 0x67, 0x92, 0x1f, 0x96, 0xa9, 0x4e, 0x0a, 0x87, 0x66, 0x10, 0x94,
++      0xa5, 0xa2, 0x4c, 0x78, 0xb0, 0x51, 0x76, 0x14, 0xc9, 0x5f, 0x83, 0x3d,
++      0x84, 0xa7, 0x9d, 0x78, 0x31, 0xef, 0xc4, 0x2b, 0xe9, 0x2d, 0x38, 0x50,
++      0xf2, 0x10, 0x6e, 0x36, 0x3d, 0xce, 0x55, 0x13, 0xee, 0x4a, 0x4c, 0x5e,
++      0x86, 0xae, 0x91, 0x87, 0x51, 0x9d, 0x71, 0x76, 0x53, 0x3e, 0xd5, 0x6f,
++      0x21, 0xb9, 0x6c, 0x28, 0xf2, 0xfd, 0x46, 0x64, 0xd2, 0x29, 0xc2, 0x40,
++      0x61, 0xaa, 0x81, 0x9c, 0x98, 0x68, 0x68, 0xb4, 0xfb, 0xba, 0x39, 0xba,
++      0x96, 0x2b, 0x7d, 0xb1, 0xdf, 0x7c, 0xc7, 0x5c, 0x9f, 0xb9, 0x0f, 0xfb,
++      0xb2, 0x3d, 0x84, 0x4d, 0xb7, 0x50, 0x7c, 0xaf, 0xd0, 0x38, 0x1d, 0xef,
++      0xc6, 0xbe, 0xbc, 0x71, 0x35, 0x7e, 0x4c, 0xda, 0xf1, 0xa3, 0x1f, 0x55,
++      0xed, 0xbc, 0x7f, 0xb5, 0x05, 0x77, 0xa5, 0x81, 0xf7, 0xd2, 0xdc, 0x4f,
++      0x24, 0x4c, 0x41, 0xf9, 0xe0, 0x90, 0xce, 0x39, 0x74, 0x0b, 0x96, 0xe6,
++      0x2d, 0xe4, 0x75, 0x0b, 0x67, 0x75, 0x8d, 0x72, 0x34, 0xe7, 0xea, 0x01,
++      0xa1, 0x51, 0x7e, 0x36, 0x9d, 0xfd, 0x88, 0xb4, 0xb3, 0x8e, 0x1e, 0x9e,
++      0xdb, 0x87, 0xea, 0xb7, 0xf7, 0xa1, 0x66, 0xd2, 0x0e, 0x3c, 0x45, 0x8a,
++      0x78, 0x3e, 0x1b, 0x0e, 0xbd, 0x07, 0x6b, 0x97, 0xc3, 0x50, 0x13, 0x4e,
++      0x07, 0xef, 0xcf, 0xf0, 0xfe, 0x94, 0xd6, 0xbd, 0xd4, 0xa1, 0xea, 0x45,
++      0xd1, 0xdc, 0xf3, 0x16, 0xca, 0x1b, 0x65, 0xa8, 0xa1, 0xd7, 0x10, 0x89,
++      0x76, 0xf2, 0x1e, 0x44, 0xa9, 0x92, 0xbb, 0x97, 0xcd, 0xe5, 0x6e, 0x2d,
++      0xef, 0x15, 0xe1, 0x61, 0x09, 0x13, 0x53, 0x96, 0x29, 0x91, 0xfd, 0x4e,
++      0xd1, 0x9c, 0x3f, 0xce, 0xee, 0x42, 0x36, 0x66, 0x59, 0xb7, 0xc7, 0xb5,
++      0xbe, 0x06, 0x07, 0xfe, 0x90, 0x32, 0x39, 0xc8, 0xe6, 0x53, 0xe4, 0x6b,
++      0xa1, 0x1d, 0xed, 0xa6, 0xe5, 0xb6, 0xeb, 0x0a, 0xee, 0x4f, 0x76, 0x89,
++      0x96, 0xc2, 0x16, 0xb1, 0x9c, 0xb0, 0x5b, 0xe8, 0xd8, 0x66, 0xd1, 0x74,
++      0xb4, 0x82, 0xdd, 0x22, 0x85, 0xcf, 0x7a, 0xa8, 0x37, 0xa7, 0x2d, 0xa4,
++      0x89, 0xaf, 0xa7, 0xfe, 0x0e, 0x5f, 0xac, 0x8b, 0x7e, 0x5c, 0xd7, 0xce,
++      0xbe, 0xf8, 0x30, 0x8e, 0xa5, 0xd9, 0xce, 0xfb, 0xb1, 0x87, 0xe4, 0xb3,
++      0x62, 0x88, 0xf7, 0xc3, 0xd4, 0xb3, 0x83, 0x08, 0xf7, 0xbd, 0x2a, 0xd4,
++      0x72, 0x01, 0xcd, 0x7a, 0x8d, 0x83, 0xe3, 0xab, 0x3a, 0xd0, 0xe4, 0xa8,
++      0xd0, 0x9f, 0xc8, 0x83, 0xe2, 0x69, 0x85, 0x87, 0x95, 0xf9, 0xa5, 0x64,
++      0xab, 0xa6, 0xe7, 0x52, 0xbc, 0xb9, 0xbf, 0x1a, 0x1b, 0xc4, 0x07, 0xd3,
++      0x21, 0x78, 0x0f, 0x27, 0x17, 0xfa, 0xd1, 0x21, 0xde, 0xb3, 0xeb, 0xc5,
++      0x4e, 0xf1, 0x4e, 0xbe, 0x5b, 0x5c, 0x9e, 0xe8, 0x42, 0x64, 0xf8, 0x3e,
++      0xf1, 0xf6, 0x04, 0xd3, 0xd9, 0x23, 0xce, 0x4f, 0x73, 0x9f, 0xd4, 0xc2,
++      0x1e, 0x9d, 0xfb, 0xa2, 0x8b, 0xab, 0xe0, 0xb7, 0x70, 0x4c, 0x67, 0x7d,
++      0x72, 0x9f, 0xb0, 0xd2, 0x5f, 0xda, 0x10, 0xcf, 0x59, 0x4e, 0x8d, 0x7b,
++      0xc5, 0x41, 0x9b, 0xdf, 0x29, 0xc2, 0xd1, 0xd3, 0x13, 0x5b, 0xc4, 0xf1,
++      0x7c, 0x85, 0xd7, 0xc9, 0x3c, 0xdb, 0xaf, 0x4c, 0x3a, 0xfe, 0x62, 0x9e,
++      0x36, 0xa1, 0xb4, 0x07, 0xe1, 0xb6, 0xfb, 0x51, 0x16, 0x46, 0xf4, 0x48,
++      0xe8, 0x65, 0x04, 0xe1, 0x2c, 0xb2, 0x6d, 0x5b, 0x78, 0x5a, 0x77, 0xc1,
++      0x31, 0x22, 0x93, 0x8c, 0xc8, 0x96, 0xfc, 0x2e, 0x48, 0x93, 0x5c, 0x1b,
++      0x7c, 0xbd, 0x8a, 0xfb, 0x14, 0x21, 0x89, 0xbf, 0x7f, 0xd1, 0xe6, 0x5c,
++      0x94, 0x0f, 0xb8, 0xbf, 0xfe, 0x57, 0xee, 0x8a, 0xed, 0xb1, 0x5d, 0xcd,
++      0xf7, 0xc4, 0x29, 0xd7, 0xb6, 0x73, 0x2f, 0xdc, 0x83, 0x99, 0x9c, 0x9b,
++      0x5b, 0x14, 0x1e, 0x77, 0xbb, 0x85, 0x0b, 0xba, 0x93, 0xea, 0x97, 0x87,
++      0x28, 0x47, 0x49, 0x90, 0xb5, 0x3b, 0x50, 0x1c, 0x73, 0x4a, 0xbc, 0x5f,
++      0xf5, 0xb3, 0x18, 0xf7, 0x10, 0x80, 0x43, 0xc4, 0xc3, 0xf7, 0x73, 0x21,
++      0x6c, 0xa2, 0xba, 0x2b, 0x64, 0xd7, 0x18, 0xbf, 0x87, 0x53, 0x39, 0x87,
++      0xa0, 0xba, 0xc2, 0x91, 0x58, 0x6d, 0xe1, 0x4a, 0x5b, 0x24, 0xca, 0x7d,
++      0x68, 0x85, 0x72, 0xd6, 0xde, 0x7c, 0x1d, 0x7e, 0x96, 0xab, 0xc3, 0x2b,
++      0x39, 0x0b, 0x07, 0x63, 0x83, 0x3d, 0x5e, 0x8a, 0x95, 0xcb, 0x62, 0x2e,
++      0xec, 0x88, 0x98, 0x8a, 0x17, 0x51, 0x5c, 0x48, 0x5c, 0x87, 0x54, 0x20,
++      0xdc, 0x39, 0x88, 0x7a, 0xbc, 0x91, 0x03, 0x61, 0x09, 0x78, 0x96, 0xd2,
++      0x1c, 0x6f, 0xc7, 0xcc, 0x7e, 0x17, 0xe1, 0xd8, 0x9f, 0x0b, 0xc4, 0x6b,
++      0x60, 0xb9, 0xcf, 0xc4, 0x29, 0x57, 0x17, 0xea, 0xd0, 0x95, 0xab, 0x47,
++      0x0f, 0xe5, 0xac, 0x75, 0xab, 0xe3, 0x78, 0x2b, 0xeb, 0x13, 0x2b, 0xb3,
++      0x83, 0x3d, 0x0a, 0xcd, 0xe9, 0x6a, 0x53, 0xfb, 0x9f, 0x22, 0xe0, 0x26,
++      0x23, 0x4c, 0xe6, 0x8e, 0x07, 0xfc, 0x14, 0x77, 0x8f, 0x8b, 0x4f, 0xf1,
++      0x04, 0xd9, 0xe3, 0x3d, 0xba, 0x5a, 0xbe, 0xe4, 0x88, 0x9c, 0xdd, 0x08,
++      0x75, 0xe0, 0x16, 0x61, 0x46, 0x6b, 0x29, 0x9e, 0x34, 0x54, 0x62, 0x85,
++      0x19, 0x11, 0x32, 0x61, 0x73, 0x27, 0x3c, 0x9a, 0x89, 0xce, 0x76, 0x96,
++      0xa9, 0x07, 0x9e, 0xa3, 0x64, 0x47, 0xd2, 0x17, 0xfb, 0xfb, 0x75, 0x78,
++      0x9d, 0xf2, 0xe5, 0xb9, 0x1c, 0xf7, 0xe6, 0xdd, 0xc6, 0xbb, 0x94, 0x03,
++      0x5e, 0x8a, 0x0d, 0x86, 0x38, 0xf6, 0xe7, 0x63, 0xf8, 0xe7, 0x64, 0x96,
++      0x8d, 0x3e, 0x5a, 0xf3, 0x2e, 0xc1, 0xeb, 0x20, 0xb9, 0xc4, 0xe0, 0xbe,
++      0x9c, 0xcd, 0x0f, 0xc5, 0x63, 0xe6, 0xe9, 0xff, 0x27, 0xed, 0x8f, 0x54,
++      0xc1, 0x5b, 0x4f, 0xba, 0x9c, 0xef, 0x69, 0x5e, 0xdb, 0xcf, 0xe4, 0x7a,
++      0xa6, 0x82, 0x0f, 0xdd, 0x46, 0xb5, 0x78, 0x21, 0xc7, 0x36, 0x67, 0xe1,
++      0x19, 0x5d, 0xa7, 0xda, 0x85, 0x6b, 0xf2, 0x7e, 0xaa, 0x5f, 0xb8, 0xcf,
++      0x64, 0x7a, 0xce, 0x10, 0x85, 0xfb, 0x73, 0x58, 0x2b, 0xc3, 0xb1, 0xa2,
++      0x0a, 0xe3, 0x98, 0x70, 0x3a, 0x09, 0x73, 0x70, 0xac, 0x65, 0x7f, 0x52,
++      0x0c, 0x6d, 0x82, 0xeb, 0xcf, 0x4e, 0x98, 0xb6, 0x1f, 0x57, 0x8b, 0xfb,
++      0xc9, 0x46, 0x5e, 0x8c, 0x55, 0x61, 0x82, 0xea, 0x1f, 0xc9, 0x30, 0x3d,
++      0xdf, 0xa5, 0xe7, 0x13, 0xa3, 0xd8, 0x17, 0x84, 0xe3, 0x4f, 0x14, 0xfc,
++      0x19, 0xde, 0x74, 0xc9, 0x74, 0x1d, 0x9e, 0xee, 0xb8, 0xe9, 0xdd, 0x18,
++      0xaf, 0x16, 0xb7, 0xe6, 0x5a, 0xf0, 0xfe, 0x58, 0x1d, 0xd9, 0x77, 0x3d,
++      0x96, 0x8c, 0x04, 0xf1, 0x36, 0xd1, 0x32, 0x40, 0xb4, 0x7c, 0xd2, 0x66,
++      0x0e, 0x34, 0x40, 0xed, 0xa7, 0xba, 0xa8, 0x9b, 0xfb, 0xcd, 0x4f, 0xeb,
++      0x6a, 0xe7, 0x6d, 0xc2, 0x0b, 0x2d, 0x92, 0x24, 0xd9, 0x5b, 0xd6, 0xb0,
++      0xde, 0xac, 0xfb, 0xc0, 0xfd, 0xa3, 0x3b, 0x70, 0x68, 0x86, 0x69, 0x71,
++      0x1b, 0xcb, 0xa7, 0xf9, 0x53, 0x36, 0xae, 0xb3, 0x3f, 0xbd, 0x73, 0x9f,
++      0x30, 0x42, 0xf6, 0xe7, 0xa7, 0x6b, 0x42, 0xd3, 0xdc, 0xa7, 0x0e, 0x9b,
++      0x6e, 0xf1, 0x53, 0x17, 0xf7, 0xab, 0x93, 0xe0, 0xff, 0x57, 0x5d, 0x95,
++      0x7e, 0xdf, 0x1d, 0x30, 0xed, 0x1e, 0xca, 0x15, 0xbb, 0x97, 0x1d, 0x22,
++      0x37, 0x90, 0x89, 0x3f, 0x99, 0x30, 0x57, 0x20, 0x46, 0x05, 0x7c, 0xbd,
++      0x6c, 0x2e, 0x31, 0x7a, 0xa8, 0x46, 0x90, 0x89, 0x5f, 0x13, 0xfb, 0xda,
++      0x05, 0x0e, 0x69, 0x06, 0x5e, 0xcb, 0x73, 0x2c, 0x77, 0xe2, 0xfb, 0x69,
++      0x35, 0x94, 0x12, 0xe1, 0xce, 0x5b, 0x84, 0x84, 0x50, 0x43, 0x0f, 0x0e,
++      0x51, 0x5e, 0x99, 0x4e, 0x73, 0x1e, 0x71, 0xda, 0xe7, 0x05, 0x6a, 0x29,
++      0x0e, 0x7d, 0x38, 0x54, 0x89, 0xfb, 0x85, 0xb8, 0xba, 0xff, 0xf7, 0x48,
++      0xa7, 0x4f, 0x17, 0x78, 0x4e, 0x13, 0x9f, 0xac, 0x66, 0x1f, 0x56, 0xa3,
++      0x29, 0xe9, 0x5e, 0x84, 0xa6, 0x38, 0xb6, 0xd0, 0x72, 0xb4, 0xd6, 0x91,
++      0xac, 0x1b, 0xdd, 0xf1, 0x2e, 0xd1, 0x53, 0xfc, 0x67, 0xbc, 0x27, 0xa1,
++      0x2c, 0x30, 0x36, 0x8b, 0xf5, 0x93, 0xdc, 0x53, 0xdc, 0x22, 0xba, 0x8b,
++      0xdc, 0x57, 0x1c, 0x10, 0xbf, 0x5f, 0x64, 0x9f, 0x9f, 0xef, 0x2f, 0xce,
++      0xeb, 0x9f, 0xfb, 0x8a, 0xa6, 0xe7, 0x05, 0x92, 0xfd, 0x03, 0x39, 0x8e,
++      0xc9, 0x8e, 0xfb, 0xfd, 0x68, 0xc3, 0x84, 0x0b, 0x9e, 0xd3, 0xf1, 0xaf,
++      0xe0, 0x76, 0xc2, 0x07, 0x4b, 0xb4, 0x8a, 0xfe, 0xd6, 0x4d, 0x48, 0x48,
++      0xb4, 0x91, 0xd0, 0x17, 0xb0, 0x4e, 0x7b, 0x29, 0x9e, 0x65, 0xac, 0xbe,
++      0x00, 0xeb, 0x92, 0xed, 0xcd, 0x2e, 0xf7, 0x28, 0x0e, 0x9b, 0x94, 0x57,
++      0x3c, 0x98, 0xce, 0x2d, 0xa2, 0xda, 0xc0, 0xc2, 0x7e, 0xbd, 0x06, 0x55,
++      0x76, 0x0c, 0xf0, 0x10, 0x9e, 0x84, 0xec, 0xa3, 0x79, 0xd2, 0xc3, 0x32,
++      0xbc, 0x74, 0xef, 0x8c, 0x4e, 0x72, 0x69, 0xaf, 0xcc, 0xdd, 0x3c, 0xb1,
++      0x12, 0x07, 0xc9, 0xe3, 0x6b, 0xb4, 0x28, 0x86, 0x14, 0x1f, 0xc5, 0x9a,
++      0x3b, 0xe6, 0xe6, 0xf4, 0xd0, 0x60, 0x5e, 0xaf, 0xbf, 0xaa, 0xa2, 0x87,
++      0x35, 0x72, 0xa5, 0x06, 0x93, 0xcd, 0x6a, 0x5a, 0x6b, 0x47, 0xfb, 0x16,
++      0x74, 0x0e, 0xf9, 0xc4, 0x2b, 0xe9, 0xbb, 0xad, 0x50, 0x1d, 0x8d, 0x23,
++      0x9b, 0x75, 0xcf, 0xd1, 0xdb, 0x34, 0x21, 0xf3, 0x58, 0xee, 0x79, 0xe0,
++      0xc1, 0x9c, 0x84, 0xc0, 0xdc, 0xf5, 0xf8, 0x44, 0x08, 0x7a, 0x6b, 0x35,
++      0x50, 0x2f, 0xe8, 0x1a, 0xcf, 0xcd, 0x6b, 0xc8, 0xa8, 0x23, 0x3f, 0xb9,
++      0x33, 0x9e, 0xc0, 0xbb, 0x59, 0x27, 0x36, 0x52, 0x9e, 0xbf, 0x31, 0x6d,
++      0xe0, 0x42, 0x29, 0x60, 0xcf, 0x21, 0x19, 0xf3, 0xe3, 0x9c, 0x34, 0xce,
++      0x83, 0xc9, 0x89, 0x2f, 0xd2, 0x17, 0x20, 0x9a, 0x7f, 0x42, 0xdf, 0xf9,
++      0xde, 0x45, 0xbb, 0x3f, 0x70, 0xea, 0x9a, 0xba, 0x4a, 0x1a, 0xe1, 0x9e,
++      0x52, 0x25, 0x17, 0x74, 0xe8, 0xac, 0x4b, 0x3f, 0x66, 0x47, 0x4d, 0x5c,
++      0x58, 0x5d, 0x8b, 0x4f, 0x46, 0x9b, 0x70, 0x7f, 0xce, 0x8b, 0x4b, 0xa3,
++      0x16, 0x56, 0xb6, 0xe1, 0xee, 0x20, 0x61, 0xb1, 0x5a, 0xf2, 0xfb, 0xd7,
++      0xa8, 0xf6, 0xa1, 0x78, 0x4a, 0x94, 0x46, 0x12, 0x1b, 0xc8, 0xae, 0xa3,
++      0x31, 0xa4, 0x6e, 0x8a, 0x47, 0x42, 0x17, 0xf1, 0x3d, 0x8b, 0x62, 0xb1,
++      0xe2, 0x30, 0xba, 0x84, 0xd3, 0xde, 0x67, 0xdc, 0x62, 0xef, 0x4b, 0x4a,
++      0x93, 0x03, 0xc2, 0x51, 0xbc, 0xd6, 0xaf, 0xbf, 0x2c, 0x0f, 0x71, 0xee,
++      0xe1, 0x1e, 0xc6, 0x88, 0xe5, 0xd2, 0xb8, 0x57, 0xb3, 0x59, 0xec, 0x9d,
++      0xb8, 0x9a, 0x9b, 0xae, 0xe6, 0xa3, 0xdd, 0x73, 0x79, 0x68, 0x30, 0xff,
++      0x8b, 0x2f, 0xe0, 0xa8, 0xd0, 0xdc, 0x7e, 0x07, 0xe7, 0x1f, 0x8f, 0x78,
++      0x93, 0xcc, 0x61, 0x1f, 0xf9, 0xe0, 0x49, 0xfd, 0x74, 0x90, 0x32, 0x04,
++      0x9c, 0xad, 0x02, 0x0f, 0xf2, 0x59, 0x93, 0x80, 0x85, 0xcd, 0x7a, 0xc5,
++      0x1e, 0xda, 0xda, 0x5d, 0xe8, 0xa3, 0x9c, 0xe4, 0x8a, 0xf9, 0xc8, 0xd7,
++      0x15, 0xbc, 0xaa, 0xb3, 0x0d, 0x6f, 0x9e, 0xcb, 0x49, 0xbc, 0x7f, 0x5e,
++      0xd9, 0xeb, 0xfe, 0x7c, 0xdf, 0x7b, 0xde, 0x36, 0x75, 0x24, 0x17, 0xc2,
++      0xfb, 0x76, 0x5c, 0xa3, 0xfa, 0x41, 0xa6, 0xda, 0x61, 0x23, 0x12, 0x0b,
++      0x54, 0x6e, 0x6d, 0x10, 0xf6, 0x36, 0xf1, 0xef, 0xdb, 0xfb, 0x70, 0xdf,
++      0x88, 0x84, 0x6a, 0x8d, 0xe3, 0xac, 0x89, 0x43, 0x75, 0x1c, 0xa7, 0xba,
++      0xb0, 0x6b, 0xc4, 0x23, 0xce, 0xe4, 0x9c, 0x78, 0xa2, 0xfb, 0x11, 0x2c,
++      0x68, 0xbd, 0x07, 0xb0, 0x6d, 0x90, 0xbf, 0x7f, 0x0b, 0xa9, 0x45, 0xbc,
++      0x3e, 0xf7, 0xda, 0x04, 0x7c, 0xad, 0xcc, 0x07, 0xbc, 0xef, 0xd3, 0xfc,
++      0xdb, 0x86, 0x9c, 0xe2, 0x62, 0xfa, 0x3f, 0x5b, 0x27, 0x02, 0x8c, 0x13,
++      0xf8, 0x5e, 0x0d, 0xcc, 0x3a, 0x1e, 0xcb, 0x3a, 0xf4, 0x51, 0x6d, 0xda,
++      0x87, 0x21, 0xa2, 0xeb, 0x9c, 0x3d, 0xd7, 0x95, 0x39, 0xfa, 0x7d, 0xa2,
++      0x36, 0x23, 0x9b, 0x41, 0xa2, 0x45, 0x59, 0xdd, 0x8d, 0xda, 0xe2, 0xb5,
++      0xf9, 0xb6, 0xc6, 0xc3, 0xfd, 0x4a, 0xd2, 0x15, 0xe5, 0x84, 0x5e, 0xbc,
++      0x9b, 0x16, 0x78, 0xc7, 0xb6, 0xc1, 0x5e, 0x34, 0xe5, 0x6b, 0x00, 0x3b,
++      0x86, 0xf0, 0xb8, 0xaf, 0x57, 0x6c, 0x5b, 0xea, 0xc3, 0x03, 0xc4, 0x4b,
++      0x0d, 0xf1, 0xf2, 0x61, 0x6c, 0x29, 0xad, 0xc3, 0xd7, 0xfe, 0x9d, 0x3c,
++      0x77, 0xd6, 0x68, 0x6e, 0x2e, 0x4a, 0x18, 0x7e, 0xae, 0xf7, 0x22, 0xd8,
++      0x39, 0x12, 0xe9, 0xf1, 0x49, 0x6c, 0x87, 0x11, 0xdc, 0x3b, 0x79, 0x2b,
++      0xdd, 0xe7, 0xb9, 0x82, 0xb8, 0x2b, 0xe3, 0x14, 0x6f, 0x51, 0xbd, 0x74,
++      0x2a, 0x2d, 0x2d, 0x72, 0xe0, 0x39, 0xeb, 0x89, 0xc0, 0x2e, 0xdc, 0xa4,
++      0x77, 0x61, 0x3b, 0xd9, 0x60, 0x47, 0xd3, 0x2e, 0x8c, 0x92, 0x0d, 0x6c,
++      0xab, 0xa7, 0x1a, 0x2e, 0x56, 0xb2, 0x7a, 0x03, 0x2c, 0x47, 0x81, 0x4e,
++      0xba, 0x5e, 0x47, 0x75, 0x9d, 0x14, 0x23, 0x6b, 0x23, 0xbf, 0x90, 0x35,
++      0x35, 0x97, 0xc4, 0xef, 0xd8, 0x6b, 0xd6, 0x51, 0x9e, 0x76, 0x31, 0x3e,
++      0xf0, 0x33, 0x4e, 0xf8, 0x22, 0x3d, 0xa6, 0x55, 0xa5, 0x69, 0xd1, 0x8d,
++      0x52, 0x53, 0x6e, 0x86, 0x6c, 0x76, 0x7d, 0xeb, 0xb5, 0xcf, 0xcd, 0xcb,
++      0x48, 0x87, 0xbb, 0x75, 0xca, 0x2a, 0x2b, 0x83, 0x50, 0x5a, 0xaf, 0xd5,
++      0xfd, 0xfc, 0x1c, 0x4c, 0x73, 0x25, 0xae, 0x85, 0xa4, 0x88, 0x72, 0x37,
++      0x2e, 0xd0, 0x1a, 0x41, 0x6c, 0x2d, 0x76, 0xa1, 0x77, 0xc4, 0xf1, 0x19,
++      0x3e, 0xf1, 0xb3, 0x2d, 0x7f, 0xc6, 0xff, 0x8e, 0x91, 0x48, 0xa7, 0x77,
++      0x8e, 0xff, 0xed, 0x93, 0x9f, 0xcd, 0x35, 0x90, 0xe1, 0xbc, 0xca, 0xf3,
++      0xf1, 0xb9, 0xa1, 0x79, 0xf9, 0x06, 0xf1, 0x80, 0x3d, 0xdf, 0x61, 0x0f,
++      0xfb, 0xb0, 0x8b, 0x7c, 0x7d, 0x43, 0xab, 0x89, 0x57, 0x13, 0xf7, 0x5b,
++      0x3b, 0x6c, 0x19, 0xdc, 0x6f, 0x3f, 0xdf, 0xd9, 0x74, 0x76, 0x0e, 0xfb,
++      0x54, 0xfa, 0xb0, 0xa7, 0x4a, 0x2d, 0xf6, 0x1e, 0xc3, 0x0f, 0x29, 0x0f,
++      0x3e, 0xf7, 0xb9, 0x3e, 0xdf, 0x76, 0x17, 0xef, 0x4d, 0x3c, 0x5d, 0x92,
++      0x85, 0x73, 0xa4, 0x5a, 0xb8, 0x46, 0x98, 0xb6, 0x8f, 0xe5, 0x8a, 0x8f,
++      0xfd, 0x57, 0x24, 0x03, 0xbc, 0xcf, 0x58, 0xb1, 0xff, 0x68, 0xfb, 0xbd,
++      0xc0, 0x51, 0xd3, 0x53, 0xb5, 0x0a, 0x54, 0xeb, 0x77, 0xdb, 0xf6, 0xb0,
++      0xd0, 0x08, 0xac, 0x7d, 0xae, 0x89, 0xeb, 0x7d, 0xee, 0x0d, 0x6a, 0x6b,
++      0xc7, 0x08, 0x80, 0x6e, 0x55, 0x78, 0x4d, 0xf5, 0x04, 0xf7, 0xeb, 0xb9,
++      0x8f, 0x4f, 0x71, 0xd7, 0x5b, 0xb7, 0xca, 0xf4, 0x2c, 0x58, 0xe5, 0x14,
++      0x8b, 0x33, 0x3d, 0x64, 0x7b, 0x1a, 0x12, 0x19, 0xd3, 0xdb, 0xb0, 0x2a,
++      0x84, 0x87, 0x32, 0xf3, 0x31, 0xb9, 0x05, 0x2d, 0xe3, 0xc0, 0x0f, 0x33,
++      0x41, 0x34, 0x8f, 0x86, 0xfb, 0x6f, 0x95, 0xc2, 0x03, 0xb3, 0x12, 0xdf,
++      0xbb, 0xbc, 0x66, 0xa5, 0x8d, 0xc5, 0x3f, 0x5a, 0xb3, 0xc2, 0xfe, 0x0c,
++      0x18, 0xd7, 0xe7, 0xef, 0x40, 0x7a, 0xc6, 0x33, 0x5b, 0x96, 0x2c, 0x3c,
++      0x14, 0x93, 0x70, 0xb3, 0xfe, 0x6f, 0xc9, 0xb7, 0x04, 0xd9, 0xc6, 0xab,
++      0x9c, 0x83, 0xed, 0x60, 0xb6, 0x64, 0x95, 0x86, 0x55, 0x99, 0x3a, 0x8a,
++      0x49, 0xf5, 0x14, 0x9f, 0xea, 0x70, 0x85, 0x62, 0xd2, 0x8a, 0x36, 0x0b,
++      0x8b, 0xdb, 0xcc, 0xbe, 0xc5, 0xe0, 0x3d, 0x68, 0xd5, 0x2c, 0x0a, 0xb5,
++      0xa7, 0x4b, 0x52, 0xbb, 0xeb, 0x25, 0x05, 0xdb, 0x23, 0x3c, 0x77, 0xd0,
++      0x58, 0x95, 0xaf, 0xe4, 0xd3, 0x4a, 0x5e, 0x75, 0xce, 0xe5, 0x53, 0xb7,
++      0xa1, 0x4f, 0xab, 0x3f, 0x4e, 0x49, 0xbc, 0x6f, 0xd2, 0x83, 0x91, 0x6c,
++      0x0a, 0x7b, 0xb3, 0x21, 0xfc, 0x3a, 0xe3, 0x26, 0xdb, 0x08, 0xeb, 0x3f,
++      0x00, 0x8f, 0xf1, 0x19, 0xb1, 0x7c, 0x38, 0xfa, 0x90, 0xf4, 0x13, 0x94,
++      0x9d, 0xea, 0x11, 0xaa, 0x12, 0x08, 0x37, 0x34, 0x87, 0x5e, 0xc4, 0x4f,
++      0xec, 0x7d, 0x36, 0xa0, 0xc2, 0x43, 0x53, 0x1e, 0xc8, 0x65, 0x3c, 0xb3,
++      0xb0, 0x7b, 0xb2, 0xbc, 0x6f, 0x2c, 0x61, 0xbd, 0x7e, 0x3f, 0xc9, 0x59,
++      0xa0, 0xa9, 0xb5, 0x0e, 0xe5, 0x2d, 0x4e, 0x8c, 0x64, 0x38, 0x0f, 0x7f,
++      0xbc, 0x46, 0x1e, 0x42, 0x79, 0x6e, 0x4f, 0x34, 0xe1, 0xa0, 0x0c, 0xfd,
++      0x72, 0x11, 0x38, 0x48, 0xb1, 0x63, 0x53, 0xec, 0x37, 0x56, 0x05, 0x8f,
++      0xca, 0xfe, 0xf4, 0x98, 0xc0, 0x02, 0x2d, 0x49, 0xf2, 0x70, 0xfa, 0x0f,
++      0xa5, 0xa3, 0x76, 0x0e, 0x1e, 0xa1, 0xf9, 0x93, 0xf6, 0xfc, 0x91, 0xfd,
++      0x4b, 0x25, 0x09, 0xd7, 0xb7, 0x1e, 0xc5, 0xc4, 0xc2, 0x0a, 0x0d, 0x41,
++      0xc2, 0x04, 0x5c, 0xcb, 0xd6, 0x13, 0x8f, 0x9b, 0x1f, 0xe3, 0xbe, 0xe6,
++      0x6f, 0xd7, 0xdc, 0x30, 0xce, 0x7e, 0xfd, 0xf1, 0x9a, 0x77, 0xd3, 0x6a,
++      0xb2, 0x9e, 0xea, 0x87, 0x6a, 0x92, 0xc3, 0xbd, 0x43, 0xdc, 0x4f, 0xa8,
++      0x37, 0x5e, 0x3f, 0xcc, 0x79, 0x59, 0x1d, 0x68, 0x10, 0x3e, 0x71, 0x73,
++      0x46, 0xed, 0x63, 0xc2, 0x2f, 0x47, 0xd4, 0x20, 0xc9, 0xae, 0xf3, 0x1e,
++      0xd1, 0xc7, 0x35, 0x8b, 0x2d, 0xb7, 0xeb, 0xf2, 0x15, 0xdc, 0x11, 0x9e,
++      0xc3, 0x21, 0x51, 0x1b, 0x77, 0x58, 0xd6, 0x9e, 0x18, 0xe7, 0x71, 0xfb,
++      0x4c, 0x00, 0x5d, 0xaf, 0x33, 0x96, 0x52, 0x6d, 0x31, 0xc8, 0xf4, 0xf1,
++      0x19, 0x0f, 0x89, 0x6a, 0xd1, 0xec, 0xab, 0x73, 0xb8, 0xc4, 0x87, 0x7d,
++      0x74, 0xbd, 0x6c, 0xe3, 0x13, 0x3e, 0xa7, 0xe8, 0x35, 0x94, 0xc7, 0xf8,
++      0x6c, 0xe3, 0x6f, 0xd7, 0xac, 0x1f, 0x53, 0x43, 0x12, 0xf1, 0xb1, 0x97,
++      0xf7, 0xe7, 0x69, 0xce, 0x69, 0x9d, 0xe9, 0xbe, 0xbc, 0x86, 0xfb, 0xb1,
++      0x4b, 0x88, 0x6e, 0x2b, 0x1b, 0x66, 0x0c, 0x6a, 0xdb, 0x4a, 0x22, 0x4f,
++      0x55, 0xfd, 0xe2, 0x0a, 0xaf, 0x2e, 0xd2, 0xc9, 0xb1, 0x74, 0x12, 0xa7,
++      0xe2, 0x15, 0xfd, 0xac, 0xcb, 0x7f, 0x03, 0xa9, 0xfa, 0x0e, 0xe4, 0xb2,
++      0x8a, 0x7f, 0x43, 0xa6, 0x03, 0xa3, 0xa4, 0xc3, 0xbb, 0x8b, 0x41, 0x7f,
++      0x47, 0x46, 0x43, 0x6f, 0x91, 0xeb, 0x2b, 0x18, 0x7b, 0xc6, 0x26, 0xe7,
++      0xea, 0xe0, 0x4a, 0x2e, 0x39, 0x90, 0xa9, 0xd8, 0x5c, 0x38, 0xef, 0x99,
++      0x0d, 0x89, 0xca, 0xbc, 0x32, 0xad, 0x23, 0x0f, 0xfd, 0x89, 0x85, 0x85,
++      0x6c, 0x0b, 0x77, 0x60, 0x6c, 0xdc, 0x6f, 0x2e, 0x36, 0x14, 0xac, 0x6a,
++      0xfd, 0x73, 0x7a, 0xb6, 0x05, 0x1f, 0x1f, 0xff, 0x3a, 0xca, 0xdf, 0x24,
++      0x7c, 0x94, 0x49, 0xa2, 0xb9, 0xf5, 0x16, 0xa4, 0xfe, 0x40, 0xc6, 0xd3,
++      0x19, 0x1f, 0x9e, 0xcf, 0x54, 0xf6, 0xec, 0x7f, 0x94, 0x25, 0x3f, 0x24,
++      0x1f, 0x78, 0xee, 0x4b, 0xf7, 0x49, 0x29, 0x9e, 0x3b, 0x78, 0x0f, 0xff,
++      0x1f, 0x1e, 0x77, 0xde, 0x1e, 0xe7, 0x11, 0x75, 0x23, 0xf3, 0xf3, 0x5a,
++      0xd0, 0x5a, 0xff, 0xbe, 0x67, 0x08, 0xf3, 0x81, 0x62, 0x48, 0xe5, 0x8c,
++      0x83, 0x90, 0x47, 0xec, 0x7d, 0x23, 0xc2, 0xb9, 0x11, 0xfd, 0x02, 0x4c,
++      0xb8, 0x09, 0x5f, 0x2d, 0x25, 0x59, 0x68, 0x99, 0x80, 0x5f, 0x2a, 0x2a,
++      0xf4, 0xdf, 0xe8, 0x77, 0x92, 0x7c, 0x9c, 0xc5, 0x8f, 0x28, 0xa6, 0xb0,
++      0x4f, 0x55, 0x72, 0x9c, 0x54, 0x7c, 0xc4, 0x4b, 0xc0, 0x87, 0x3e, 0x2b,
++      0x36, 0x1d, 0xca, 0x2f, 0xf6, 0x32, 0x96, 0xc9, 0x65, 0x2a, 0xbf, 0x23,
++      0x57, 0x7f, 0x93, 0x9e, 0x6d, 0x99, 0x8d, 0xd0, 0x6f, 0x96, 0xc5, 0x73,
++      0x56, 0x6a, 0x33, 0xcb, 0x2b, 0xe0, 0x7f, 0x83, 0xe4, 0x3f, 0x46, 0x34,
++      0x66, 0x69, 0x8d, 0xd7, 0x69, 0xcd, 0x4c, 0xf1, 0x10, 0x8d, 0xe1, 0x7b,
++      0x24, 0x67, 0xdb, 0x76, 0x0f, 0x7b, 0xf9, 0x7c, 0xc2, 0xf3, 0x19, 0x60,
++      0x30, 0x6b, 0xaa, 0xce, 0xb9, 0x73, 0x9d, 0x83, 0x94, 0x2f, 0xab, 0x28,
++      0x16, 0xbd, 0x19, 0xdf, 0x8e, 0x1b, 0x73, 0x6a, 0xd2, 0x24, 0x3c, 0x96,
++      0x52, 0x20, 0x48, 0x77, 0x64, 0xc3, 0x01, 0xe3, 0xdd, 0x74, 0x23, 0xf1,
++      0x14, 0x0e, 0x5d, 0xa0, 0xf1, 0xa6, 0x53, 0xc6, 0x81, 0x51, 0x07, 0x2e,
++      0xf0, 0x1e, 0xb2, 0xa8, 0x3c, 0x6f, 0x82, 0xc7, 0xce, 0x7f, 0xaf, 0xa6,
++      0xba, 0x2e, 0x9c, 0xa0, 0xac, 0x6a, 0xd6, 0x10, 0x6e, 0xcf, 0xb7, 0x3f,
++      0x82, 0x43, 0x54, 0xeb, 0xef, 0x88, 0x85, 0x90, 0xac, 0x8b, 0x53, 0xbd,
++      0xd1, 0xdc, 0x7f, 0x09, 0xff, 0xcd, 0x2a, 0xf3, 0x3e, 0xbc, 0x08, 0x27,
++      0x2e, 0xe1, 0x53, 0xcb, 0xa1, 0x69, 0x67, 0xa7, 0xa0, 0x95, 0x2f, 0xa0,
++      0x79, 0xe0, 0x13, 0xbc, 0x67, 0xf1, 0x1e, 0xbd, 0xec, 0x70, 0x10, 0x06,
++      0x0c, 0x2b, 0x4e, 0x04, 0x50, 0x0e, 0x38, 0xb0, 0x49, 0xe7, 0xde, 0xb4,
++      0x3a, 0xf0, 0x24, 0x61, 0xf9, 0x77, 0x44, 0x73, 0xdf, 0x87, 0x38, 0x6f,
++      0x4d, 0xd4, 0xf1, 0xba, 0x02, 0x89, 0xeb, 0x9b, 0xcf, 0xba, 0xa1, 0x76,
++      0xba, 0x84, 0x96, 0x68, 0x70, 0xfc, 0x95, 0x75, 0x3e, 0xf0, 0xa9, 0xa5,
++      0x45, 0x3e, 0x25, 0x1c, 0xa4, 0x05, 0x27, 0xc9, 0xf6, 0xfb, 0x30, 0x4f,
++      0x9b, 0xa8, 0x86, 0x57, 0x27, 0x1a, 0x18, 0xf7, 0x99, 0x9e, 0x7d, 0x44,
++      0xdb, 0x6b, 0x84, 0x03, 0x76, 0xc4, 0x2e, 0x59, 0xc9, 0x85, 0x7c, 0xfe,
++      0x4f, 0xa9, 0xae, 0xf4, 0xc0, 0xb9, 0x6f, 0x72, 0x07, 0xee, 0x4a, 0x3b,
++      0x49, 0x4e, 0xf3, 0x78, 0xcd, 0x45, 0x31, 0x98, 0x63, 0x7f, 0xf9, 0x3a,
++      0x2a, 0xcd, 0x24, 0x2a, 0xf1, 0xb1, 0x87, 0xe2, 0xc2, 0x6e, 0x3b, 0x17,
++      0xc0, 0xbb, 0x64, 0x55, 0x2b, 0x3e, 0x19, 0x7f, 0xd3, 0x4b, 0xbe, 0xb4,
++      0x4e, 0x6b, 0x83, 0x08, 0x66, 0x4c, 0x51, 0x6b, 0x38, 0xf0, 0x61, 0xbb,
++      0xda, 0x29, 0x39, 0x06, 0x70, 0x7d, 0xcc, 0xb4, 0x7c, 0x9a, 0xd6, 0xd3,
++      0x22, 0x22, 0xdd, 0x45, 0x11, 0x45, 0x75, 0xd1, 0x27, 0x57, 0x17, 0x5b,
++      0x64, 0x6f, 0xd1, 0xf4, 0x28, 0xab, 0xb6, 0x53, 0xdd, 0xb2, 0x8b, 0x6a,
++      0x5b, 0x1f, 0xd5, 0xd7, 0xaa, 0x7e, 0x11, 0x6e, 0x92, 0x7f, 0x08, 0xfb,
++      0x4a, 0x06, 0x9c, 0x99, 0x9d, 0x70, 0x65, 0xc2, 0xca, 0x5e, 0xec, 0x42,
++      0x32, 0x58, 0xc1, 0xb6, 0x32, 0xe9, 0xaa, 0xaa, 0x9d, 0xb1, 0xcc, 0x76,
++      0x9c, 0x9f, 0x60, 0x7c, 0x9e, 0xc0, 0xd6, 0x34, 0xff, 0x86, 0xf7, 0xc5,
++      0xb8, 0x81, 0x93, 0x54, 0x3b, 0x79, 0x5a, 0x1b, 0x48, 0x0f, 0x8d, 0x18,
++      0x2c, 0x09, 0x36, 0x2b, 0xd2, 0x05, 0xbc, 0x27, 0xdb, 0x65, 0x1c, 0x9c,
++      0xa2, 0x44, 0x42, 0xf9, 0xca, 0x99, 0x51, 0x28, 0x4e, 0xc8, 0xf0, 0x69,
++      0x3e, 0xfa, 0x1d, 0xe0, 0x73, 0x4b, 0x64, 0x67, 0xbf, 0x5d, 0xd3, 0x62,
++      0xc7, 0x9a, 0x7a, 0xaa, 0x75, 0xde, 0x21, 0x5e, 0x58, 0x16, 0x06, 0xaa,
++      0x47, 0xe6, 0x6b, 0xc2, 0xf5, 0xb7, 0x55, 0x23, 0x48, 0x73, 0x32, 0x0e,
++      0xac, 0x9c, 0x57, 0x5d, 0x1f, 0x6b, 0x45, 0x21, 0x27, 0xe6, 0x30, 0xd6,
++      0xa0, 0xea, 0xc3, 0x3a, 0x1c, 0xa2, 0xda, 0xdf, 0xaf, 0x6d, 0x45, 0x46,
++      0x29, 0x7b, 0x7f, 0x11, 0xe7, 0x1a, 0x00, 0xde, 0x5e, 0xc2, 0x50, 0x43,
++      0xe9, 0xaf, 0x72, 0xcc, 0xf4, 0xdc, 0x1d, 0xd7, 0x71, 0x24, 0x47, 0x21,
++      0x4a, 0x5b, 0x87, 0xda, 0xb6, 0x2e, 0x7c, 0x58, 0xc7, 0xf8, 0x97, 0x62,
++      0x15, 0xd1, 0xb3, 0x77, 0x2a, 0x60, 0x9f, 0xab, 0xd8, 0x57, 0x9a, 0xa7,
++      0xf9, 0x5a, 0x5a, 0xbf, 0x8c, 0x46, 0x96, 0xc9, 0x3f, 0x44, 0x23, 0xd9,
++      0x2c, 0x61, 0x9e, 0x5c, 0xba, 0x17, 0x2f, 0xa7, 0x79, 0xde, 0x70, 0x52,
++      0x17, 0x0a, 0xf7, 0xe6, 0x6d, 0x99, 0x98, 0x53, 0xbc, 0x06, 0xaf, 0x3f,
++      0xbf, 0x4e, 0x80, 0x6a, 0x85, 0x7f, 0xec, 0x5a, 0x14, 0x37, 0x72, 0xeb,
++      0xa8, 0xee, 0x8c, 0x42, 0xfb, 0xfd, 0x32, 0xe9, 0x83, 0x7b, 0xd5, 0x4b,
++      0x09, 0xf3, 0xc2, 0xf3, 0x4a, 0x9c, 0xcf, 0x30, 0x5b, 0xbb, 0x64, 0xc3,
++      0xb2, 0x5c, 0xed, 0x9a, 0xf2, 0x36, 0xd8, 0x0e, 0x7d, 0xbc, 0xe7, 0xe1,
++      0xd9, 0xdb, 0xee, 0xc3, 0x41, 0xca, 0x81, 0x4f, 0xa5, 0x9b, 0x4d, 0xae,
++      0xfd, 0xc0, 0x38, 0x54, 0xa4, 0xe8, 0xd9, 0x7f, 0x55, 0xcd, 0x3e, 0xbb,
++      0xa7, 0xb4, 0x13, 0x52, 0xa6, 0xa7, 0x9a, 0xeb, 0x0d, 0x37, 0xd5, 0xc9,
++      0x83, 0x69, 0xa6, 0xd7, 0xda, 0xe5, 0xa4, 0xb9, 0x76, 0xc7, 0xb5, 0xd9,
++      0x1b, 0xc9, 0x2e, 0x1a, 0x0c, 0x96, 0x63, 0x00, 0x4f, 0xd0, 0xd8, 0x50,
++      0x89, 0x65, 0x79, 0xa8, 0x9a, 0xfb, 0x9e, 0xfb, 0x48, 0xbf, 0xb5, 0xd9,
++      0xca, 0x3c, 0xd9, 0x52, 0x1f, 0x96, 0x0e, 0xbd, 0x58, 0x5d, 0xa9, 0x7d,
++      0xb8, 0x2e, 0xef, 0xc7, 0xbe, 0x74, 0x00, 0x53, 0xe9, 0x66, 0xe5, 0x05,
++      0xfb, 0xcc, 0x40, 0xa5, 0x47, 0x36, 0x98, 0x9e, 0x1f, 0x13, 0xc0, 0xe4,
++      0xd5, 0xef, 0x2c, 0x9f, 0x4a, 0xef, 0xf4, 0x94, 0x8d, 0xf9, 0x65, 0x4c,
++      0x04, 0x2a, 0x78, 0x88, 0x62, 0x85, 0xf7, 0x51, 0xd2, 0xeb, 0x3b, 0xa4,
++      0x57, 0x89, 0xf4, 0xfa, 0x82, 0xfe, 0x23, 0xc6, 0x2c, 0x9e, 0x3d, 0x71,
++      0x1f, 0xef, 0x13, 0x99, 0x04, 0x5a, 0xec, 0x31, 0x99, 0xb8, 0x13, 0xe7,
++      0x86, 0xf8, 0x6c, 0xe2, 0x47, 0x6b, 0x5e, 0x4a, 0x5b, 0xeb, 0x66, 0x62,
++      0xcd, 0xa9, 0x77, 0x08, 0x4f, 0x9b, 0x7f, 0xa0, 0xea, 0xe7, 0xc9, 0x4f,
++      0xb3, 0xa3, 0x7f, 0x88, 0xf3, 0x75, 0xcd, 0xca, 0xcf, 0x61, 0x7a, 0x1e,
++      0x8f, 0x3f, 0x42, 0x35, 0x3f, 0xd5, 0x0d, 0x6d, 0xff, 0x92, 0x9c, 0x2c,
++      0x0e, 0x87, 0xd6, 0x3c, 0xfb, 0x02, 0xfe, 0x23, 0xce, 0x2f, 0x0e, 0xeb,
++      0x2f, 0x80, 0xc7, 0x54, 0xea, 0xf1, 0xf0, 0xf4, 0x7d, 0x7c, 0x9e, 0x2a,
++      0x48, 0x69, 0xb4, 0xb2, 0x9f, 0x95, 0xe6, 0xfd, 0x37, 0x81, 0x89, 0x2d,
++      0x54, 0x4b, 0xdb, 0xe7, 0x58, 0xe1, 0x7d, 0x92, 0xfc, 0x22, 0x3a, 0xcc,
++      0xe3, 0x3f, 0x5e, 0xa3, 0xe5, 0x43, 0x70, 0x10, 0xc6, 0x49, 0x05, 0xd4,
++      0x4e, 0x20, 0xe8, 0x7f, 0x32, 0x1d, 0xa4, 0x1a, 0xad, 0xb9, 0x3b, 0x2a,
++      0xee, 0x9c, 0xdb, 0xf7, 0xe6, 0x3c, 0xf7, 0xf1, 0x9a, 0x63, 0x69, 0x35,
++      0xf5, 0x24, 0x9a, 0x7b, 0x7c, 0xe2, 0x0e, 0xa4, 0xea, 0x9a, 0xfb, 0x4e,
++      0x22, 0x9c, 0xf0, 0x08, 0x35, 0x7a, 0x1e, 0x95, 0x79, 0x96, 0xe5, 0x1d,
++      0x54, 0x27, 0x72, 0x9c, 0x49, 0xe3, 0xa4, 0xe2, 0xc0, 0xf2, 0x56, 0x6d,
++      0x76, 0x12, 0xf3, 0xf6, 0x52, 0x19, 0xb3, 0x2e, 0x4f, 0xe3, 0x1d, 0x0a,
++      0xd5, 0xfb, 0x6e, 0x38, 0xeb, 0x79, 0x4f, 0x71, 0x27, 0x76, 0xa4, 0x39,
++      0x4f, 0x93, 0x5c, 0xc8, 0x37, 0xbb, 0x23, 0x3b, 0xd1, 0x9f, 0x0f, 0xe0,
++      0x50, 0x36, 0xbc, 0x7f, 0x2f, 0xe1, 0xba, 0xe1, 0x52, 0x38, 0xb4, 0x4d,
++      0x04, 0x48, 0xdf, 0x54, 0xff, 0xd7, 0x07, 0xa9, 0x4e, 0x56, 0xe8, 0xbf,
++      0x52, 0xcf, 0xbc, 0x44, 0xf5, 0xcc, 0x39, 0xf2, 0x35, 0xdf, 0x5c, 0xad,
++      0xba, 0x6c, 0xc2, 0xc2, 0x4c, 0x6c, 0x23, 0x2e, 0xdb, 0x3a, 0x0b, 0x92,
++      0x8d, 0x71, 0x2e, 0xe2, 0xb3, 0x35, 0x1e, 0xb1, 0x6d, 0xd8, 0xf4, 0x3c,
++      0xd8, 0x1e, 0x44, 0x38, 0xc3, 0x98, 0x53, 0xfa, 0xa6, 0x83, 0xe4, 0x31,
++      0xa5, 0xed, 0xc2, 0x86, 0xd8, 0x2e, 0xf4, 0xeb, 0x7f, 0x02, 0x77, 0x3d,
++      0xc7, 0x23, 0xd9, 0xac, 0xa5, 0x79, 0x2f, 0xb5, 0x77, 0x21, 0x7c, 0x94,
++      0x73, 0x30, 0x55, 0xc3, 0x43, 0xec, 0xbb, 0x3c, 0xff, 0x6d, 0xc6, 0x0a,
++      0xc2, 0x15, 0x35, 0xed, 0x95, 0x3c, 0x7f, 0x7d, 0x9e, 0xcf, 0x74, 0x82,
++      0x6a, 0x53, 0x78, 0xdf, 0x5a, 0x6d, 0xe0, 0x71, 0x8a, 0x31, 0x89, 0x36,
++      0x17, 0xb0, 0x80, 0xcf, 0x2e, 0x57, 0xea, 0x18, 0xe6, 0x77, 0x69, 0x5e,
++      0x60, 0x3a, 0x4e, 0xf6, 0xf1, 0x77, 0xce, 0x28, 0x85, 0xe6, 0xce, 0x96,
++      0x72, 0xff, 0xe4, 0xb0, 0x95, 0xe4, 0xf7, 0x0d, 0xa4, 0xa0, 0x8f, 0xe2,
++      0x6d, 0xb0, 0x0c, 0x2a, 0xea, 0x29, 0x2e, 0x3b, 0xb4, 0x79, 0xb9, 0xb3,
++      0xac, 0x4f, 0x58, 0x13, 0x73, 0xba, 0x70, 0xd2, 0x33, 0x7b, 0xc6, 0xd4,
++      0x81, 0xbd, 0x68, 0xee, 0x7f, 0x57, 0x54, 0xd9, 0x3b, 0x98, 0x93, 0x2d,
++      0x48, 0x2d, 0x31, 0x9c, 0x5b, 0x3e, 0xc9, 0xae, 0x23, 0x3a, 0x2e, 0x10,
++      0x08, 0x5d, 0x6f, 0xef, 0x73, 0x4d, 0xb6, 0xfc, 0x29, 0xcd, 0xcd, 0xdf,
++      0xff, 0xd8, 0xc7, 0x67, 0x2e, 0x4f, 0x65, 0x9f, 0xb7, 0xa2, 0x0b, 0x2b,
++      0xf2, 0x39, 0x4d, 0xbe, 0x1f, 0x34, 0x24, 0x34, 0x68, 0x91, 0xd9, 0x1e,
++      0xfa, 0xfd, 0xd7, 0x79, 0x42, 0xfb, 0xab, 0xfb, 0xf0, 0xcb, 0x09, 0x03,
++      0x07, 0x28, 0x0f, 0xd4, 0x6a, 0xaa, 0x32, 0x81, 0x10, 0xd7, 0xd2, 0x36,
++      0xff, 0x2b, 0x27, 0xc8, 0x0f, 0xeb, 0x14, 0xbb, 0xc6, 0xa8, 0xf0, 0x77,
++      0x99, 0xf8, 0x7b, 0xd0, 0xc7, 0xbe, 0xb0, 0x84, 0xfc, 0x62, 0x3f, 0xf9,
++      0xeb, 0x01, 0xb2, 0x35, 0xaa, 0xe0, 0xc9, 0x0f, 0xd4, 0xfd, 0x20, 0x7f,
++      0x1d, 0x4e, 0xb3, 0xfc, 0x83, 0xfe, 0x5e, 0x3e, 0xde, 0xac, 0xd9, 0x7d,
++      0x55, 0x3d, 0x24, 0x71, 0xdc, 0xb5, 0xe3, 0xa9, 0x19, 0x92, 0xac, 0x6a,
++      0xa6, 0x6b, 0xb0, 0x14, 0x0e, 0x7a, 0xf9, 0x5d, 0x00, 0x02, 0x87, 0xbd,
++      0x7a, 0x25, 0x57, 0xce, 0x50, 0x3e, 0xba, 0x4c, 0x74, 0x1c, 0x8a, 0x35,
++      0x20, 0x45, 0xf9, 0x28, 0xa3, 0x55, 0x6c, 0x49, 0x9b, 0x66, 0x8c, 0x59,
++      0x6f, 0x04, 0xc7, 0xd5, 0x90, 0xcb, 0xd1, 0x3c, 0x70, 0x06, 0x3b, 0xad,
++      0xf3, 0x75, 0x6c, 0x53, 0x2e, 0x1c, 0x6f, 0x99, 0xb6, 0xca, 0x01, 0xe6,
++      0xd7, 0x81, 0xe7, 0x75, 0xb2, 0x99, 0xc5, 0xe1, 0xe0, 0xf3, 0x94, 0x53,
++      0xa7, 0xe6, 0xf4, 0x11, 0xce, 0xcf, 0xdb, 0xe3, 0x5a, 0x96, 0x75, 0x34,
++      0x05, 0x2d, 0x91, 0x47, 0x2f, 0x7d, 0x6f, 0x0a, 0x5e, 0x9e, 0xb3, 0xd5,
++      0x15, 0xd3, 0xaf, 0xfb, 0xe6, 0xde, 0xcb, 0xb1, 0x9f, 0x09, 0xe5, 0xff,
++      0x88, 0x7e, 0xf3, 0x9c, 0x01, 0xc6, 0x32, 0x7c, 0x56, 0xcb, 0xbb, 0xa3,
++      0xdd, 0xcd, 0xfe, 0xa2, 0xf0, 0x3b, 0x09, 0x1b, 0x86, 0xb9, 0x2f, 0xcc,
++      0x3d, 0x1a, 0x07, 0xf6, 0x5e, 0x7d, 0x67, 0x82, 0x3f, 0x3b, 0xb1, 0x69,
++      0x98, 0x7b, 0x11, 0xa7, 0x6f, 0x90, 0xf1, 0x37, 0x94, 0x87, 0x65, 0xf6,
++      0x79, 0xf2, 0xf5, 0x4f, 0xd7, 0xbc, 0x34, 0xc6, 0x39, 0x35, 0x60, 0xdc,
++      0x95, 0x9e, 0xd7, 0xf1, 0x55, 0x9e, 0xce, 0xde, 0x4d, 0x71, 0x27, 0x93,
++      0x56, 0x07, 0x22, 0x0e, 0x7b, 0x7f, 0x2d, 0x55, 0x14, 0x5f, 0xa5, 0x22,
++      0x8d, 0xe7, 0x53, 0xfc, 0x03, 0x87, 0x43, 0xc8, 0x64, 0xbb, 0xf0, 0x8d,
++      0x61, 0xcb, 0x72, 0xb7, 0x39, 0xf1, 0xca, 0x90, 0x85, 0x0f, 0x62, 0xc0,
++      0xcb, 0x43, 0xe1, 0x81, 0x73, 0xc0, 0xb7, 0x6b, 0xa9, 0x46, 0x6e, 0x11,
++      0x6a, 0x37, 0x61, 0x83, 0xd0, 0x7b, 0x68, 0x0e, 0xe6, 0xa1, 0x9e, 0xdd,
++      0x4d, 0xf3, 0xbd, 0x58, 0x00, 0x7e, 0x59, 0xf0, 0xe2, 0x17, 0xc3, 0x3c,
++      0xa7, 0x17, 0xe7, 0x8e, 0xd6, 0xfb, 0x77, 0xd2, 0x5c, 0x07, 0x29, 0xbe,
++      0x77, 0x1d, 0x4b, 0x60, 0xd3, 0x61, 0x81, 0x68, 0x24, 0x81, 0xce, 0x63,
++      0x35, 0xd8, 0x38, 0x2c, 0xe3, 0xfd, 0x78, 0x0d, 0x6e, 0x39, 0x3a, 0xcf,
++      0x47, 0xa5, 0xaf, 0xc1, 0x67, 0x35, 0xf9, 0x1c, 0xdc, 0xc9, 0x2c, 0xc7,
++      0x6c, 0xca, 0x17, 0x59, 0x8e, 0x81, 0x96, 0x15, 0x6c, 0xaf, 0xf4, 0x39,
++      0x9e, 0xa6, 0xfc, 0xf1, 0x78, 0xbb, 0x16, 0x0c, 0x4a, 0x06, 0x96, 0x8f,
++      0x96, 0xef, 0xac, 0x85, 0x75, 0x8a, 0xf7, 0x33, 0x3e, 0x6a, 0xb1, 0xac,
++      0x4d, 0xf1, 0xc8, 0xec, 0xbd, 0x36, 0xae, 0x0d, 0x90, 0x4f, 0x35, 0xe2,
++      0xf1, 0xec, 0xfc, 0x9e, 0x97, 0xd6, 0x73, 0xc9, 0x61, 0xee, 0x52, 0x60,
++      0x5d, 0xa9, 0x32, 0xac, 0x8f, 0x5c, 0x46, 0x24, 0xf8, 0x80, 0xe0, 0xb3,
++      0x22, 0xdc, 0x13, 0xb7, 0xac, 0x37, 0xe3, 0x96, 0x55, 0x88, 0x9b, 0x9e,
++      0x15, 0xab, 0x14, 0x1c, 0x5b, 0xc6, 0xef, 0x2a, 0x84, 0x93, 0x0d, 0x64,
++      0x5f, 0xde, 0x65, 0x5a, 0x70, 0x2b, 0x54, 0xd3, 0xa4, 0x20, 0x17, 0x5a,
++      0xa8, 0xf6, 0x00, 0x8d, 0xfe, 0x43, 0x43, 0xf5, 0xf8, 0xfe, 0xcc, 0xef,
++      0xf2, 0xf1, 0x1d, 0xbb, 0x9f, 0x76, 0x45, 0xc7, 0xba, 0x5a, 0x44, 0x92,
++      0xf7, 0x80, 0x7b, 0xa3, 0x7c, 0xa6, 0xd5, 0xc4, 0x2d, 0xf1, 0x3e, 0xec,
++      0x18, 0xe6, 0x7d, 0xb6, 0x3a, 0xe3, 0xca, 0xb0, 0xf5, 0xd7, 0x1e, 0xa2,
++      0x7f, 0x5d, 0x7b, 0x73, 0xca, 0x6b, 0xbf, 0xe3, 0xe4, 0x34, 0xd6, 0x8f,
++      0xd5, 0xa1, 0x34, 0xa5, 0x95, 0x97, 0x88, 0xe4, 0x1b, 0x3e, 0x44, 0x82,
++      0x0d, 0x14, 0xab, 0x66, 0xc8, 0x77, 0xa7, 0x4a, 0x5c, 0x07, 0x2c, 0x30,
++      0xac, 0xd1, 0x45, 0x98, 0x9c, 0xa1, 0xb9, 0xb2, 0x5a, 0xe7, 0x07, 0x84,
++      0xf3, 0xaa, 0x0d, 0xab, 0xd6, 0x6b, 0x44, 0xce, 0x36, 0x0b, 0x07, 0x66,
++      0xdb, 0x2c, 0xab, 0xab, 0x5d, 0x1b, 0xa8, 0x11, 0xe8, 0x97, 0x0c, 0x2d,
++      0xd1, 0xe2, 0xc0, 0xd7, 0x82, 0x88, 0x74, 0xbe, 0x89, 0x48, 0xcf, 0x05,
++      0x8a, 0x61, 0x4f, 0x95, 0xf8, 0x9c, 0xf0, 0x23, 0xf8, 0xeb, 0xe1, 0x85,
++      0x38, 0x35, 0xd5, 0x3f, 0xd7, 0x13, 0x83, 0xf7, 0xfa, 0x55, 0x06, 0x8e,
++      0x0f, 0x87, 0xc8, 0x7e, 0xdc, 0x14, 0xd7, 0x65, 0x48, 0x4d, 0x90, 0xeb,
++      0xa8, 0x4e, 0x88, 0x3d, 0x66, 0x59, 0x2b, 0x9a, 0x2a, 0x35, 0xcf, 0x8a,
++      0xe9, 0x6b, 0xdf, 0x71, 0x98, 0xef, 0xf7, 0x04, 0x49, 0x7f, 0xcd, 0xa9,
++      0x1d, 0xe2, 0x8c, 0x65, 0xfe, 0x81, 0x20, 0x9e, 0x7b, 0x6a, 0xe0, 0x65,
++      0xbe, 0x65, 0xec, 0x1e, 0xe5, 0x3e, 0x1c, 0xeb, 0x0d, 0xde, 0xce, 0x38,
++      0xef, 0x97, 0xb3, 0x8e, 0xca, 0xde, 0x0d, 0x71, 0x8a, 0x89, 0xc2, 0x4f,
++      0x78, 0xca, 0xf4, 0x74, 0x50, 0x7e, 0xaa, 0x1a, 0xe6, 0xf7, 0x2d, 0x7c,
++      0x38, 0x40, 0x71, 0xe3, 0xb2, 0x5e, 0x8d, 0x43, 0x75, 0x6a, 0x82, 0xeb,
++      0xe9, 0x27, 0x4b, 0xdc, 0x33, 0xdc, 0x89, 0xed, 0xfc, 0xbe, 0x4a, 0x69,
++      0xb5, 0x7d, 0xb6, 0x90, 0xae, 0x11, 0x36, 0x60, 0x3a, 0xe6, 0xd7, 0xef,
++      0xc4, 0x92, 0x21, 0xd6, 0xe3, 0xc7, 0x6b, 0x82, 0x24, 0xa3, 0xc7, 0xc9,
++      0x2e, 0x24, 0xa3, 0x03, 0xf2, 0x90, 0x65, 0xdd, 0x18, 0xbf, 0x76, 0x0e,
++      0xad, 0xff, 0x82, 0x83, 0xea, 0x3b, 0x07, 0xef, 0xeb, 0xa9, 0x89, 0x13,
++      0xe2, 0xda, 0x39, 0x0b, 0x35, 0xdc, 0x4f, 0x34, 0xa7, 0x2a, 0x79, 0xe9,
++      0x38, 0xe5, 0xa5, 0x97, 0x73, 0xec, 0x23, 0xf5, 0x06, 0xfb, 0x88, 0x44,
++      0xb1, 0x76, 0x7d, 0x3a, 0x84, 0x0b, 0x3a, 0x34, 0x37, 0x62, 0x44, 0x77,
++      0xa4, 0xbb, 0x63, 0x0e, 0xf3, 0xb9, 0x28, 0xfe, 0x4f, 0xe5, 0x78, 0xaf,
++      0x4d, 0xa0, 0x46, 0x63, 0x1b, 0xb0, 0x73, 0x01, 0xc5, 0xb4, 0x7e, 0xd4,
++      0xae, 0x06, 0x2e, 0x0d, 0xf1, 0xfe, 0x8c, 0x86, 0x03, 0xa5, 0x01, 0xd1,
++      0x30, 0xf4, 0x5b, 0x2b, 0x54, 0x35, 0xbf, 0x07, 0xf8, 0x30, 0xef, 0x01,
++      0x92, 0x0d, 0xf4, 0xdb, 0xe7, 0x7c, 0xde, 0x4c, 0xf3, 0x39, 0x9f, 0x70,
++      0x68, 0x13, 0xf9, 0x4e, 0x2f, 0x9a, 0xf5, 0x69, 0xc2, 0xce, 0xb3, 0x44,
++      0x67, 0x93, 0xa8, 0xec, 0x73, 0x45, 0xe6, 0xf6, 0xe9, 0x96, 0xe5, 0x3b,
++      0x45, 0x4d, 0x81, 0x69, 0x0a, 0x10, 0x4d, 0x1d, 0xa2, 0xfa, 0xd8, 0x06,
++      0xe1, 0x3b, 0xd6, 0x25, 0xa4, 0x02, 0xc7, 0xe4, 0x3a, 0x63, 0x4f, 0x8e,
++      0xf3, 0xd9, 0x66, 0xe1, 0x3c, 0xba, 0x45, 0x78, 0x0b, 0x3d, 0xc2, 0x7f,
++      0xcc, 0xc4, 0xfd, 0xf1, 0x2e, 0x9c, 0x1b, 0xe6, 0xb3, 0x6c, 0xf7, 0x89,
++      0x9a, 0xb9, 0xbd, 0x39, 0x6f, 0xa1, 0xd1, 0x5f, 0x48, 0x73, 0x7f, 0xf7,
++      0xe3, 0x35, 0xe9, 0xa1, 0x45, 0xfe, 0xa7, 0xc6, 0x02, 0xfe, 0x27, 0xc7,
++      0xd4, 0xfe, 0x7d, 0xc2, 0xb2, 0x76, 0xc6, 0xfe, 0x03, 0xeb, 0xd0, 0x6a,
++      0x8e, 0x55, 0xf0, 0xc1, 0x6e, 0x92, 0xc7, 0x36, 0xca, 0x2d, 0x93, 0x7a,
++      0xf3, 0x1c, 0x16, 0x51, 0x53, 0xfc, 0xee, 0x1b, 0xfd, 0x77, 0x73, 0x6e,
++      0xe3, 0x7d, 0x4d, 0x67, 0x3b, 0x28, 0xee, 0x7e, 0xc6, 0x6b, 0xcd, 0x10,
++      0x9f, 0x51, 0xeb, 0x87, 0xff, 0x4b, 0xf6, 0xf5, 0xce, 0x7d, 0xb6, 0xaf,
++      0x97, 0x78, 0x52, 0xa8, 0xe5, 0x19, 0xe2, 0xb7, 0xca, 0xf1, 0xb9, 0x3d,
++      0xbd, 0xb9, 0xfd, 0xbc, 0x4e, 0xe1, 0x2b, 0x70, 0x7d, 0x1e, 0x30, 0x5e,
++      0x1f, 0xea, 0x10, 0xde, 0x63, 0xc3, 0x94, 0x1f, 0x37, 0x10, 0xcf, 0x7c,
++      0x76, 0xac, 0x4b, 0xf8, 0x0b, 0x9b, 0x85, 0x8f, 0xf8, 0xac, 0x26, 0x3e,
++      0x71, 0xcc, 0x23, 0xbc, 0xc4, 0xa3, 0x87, 0x78, 0xf4, 0xce, 0xf1, 0xe8,
++      0x29, 0x04, 0xfd, 0xe9, 0x74, 0xbd, 0xff, 0xd1, 0x31, 0xc5, 0xbf, 0x6f,
++      0xcc, 0xb2, 0xde, 0xd7, 0x15, 0x3f, 0xf3, 0xf5, 0xaa, 0xfe, 0x45, 0xbe,
++      0x6e, 0x20, 0xbe, 0x2a, 0x7b, 0xb1, 0xa4, 0xc3, 0x14, 0xeb, 0x90, 0xcf,
++      0x71, 0xcc, 0xf3, 0x75, 0x30, 0xcd, 0xfb, 0x95, 0xbc, 0x6f, 0x39, 0x20,
++      0x56, 0x10, 0x5f, 0x65, 0xe2, 0x6b, 0xe5, 0x97, 0xf0, 0xf5, 0xe1, 0x35,
++      0x7c, 0xbd, 0xfa, 0xf7, 0xf2, 0xe5, 0x11, 0xcb, 0x87, 0x39, 0x0e, 0xdd,
++      0x66, 0xc8, 0xc3, 0x16, 0x61, 0x47, 0x07, 0xbe, 0x3f, 0x05, 0x14, 0xb3,
++      0xbb, 0x20, 0x53, 0xbc, 0x39, 0x1d, 0x8f, 0x84, 0x5e, 0xa1, 0x7a, 0x72,
++      0xba, 0xe4, 0x15, 0xcb, 0xec, 0x3d, 0x59, 0xac, 0x90, 0x89, 0xa6, 0x19,
++      0xfb, 0x5d, 0x33, 0xe8, 0xb5, 0x1a, 0xeb, 0x52, 0x3b, 0xbb, 0x15, 0x91,
++      0x72, 0xc4, 0xd1, 0x25, 0x12, 0x05, 0xde, 0x83, 0xdd, 0x22, 0x56, 0xda,
++      0xfb, 0xaf, 0x9d, 0xe2, 0xfa, 0x42, 0x87, 0x68, 0x21, 0xbb, 0x68, 0x3e,
++      0xc6, 0xe7, 0xc1, 0x36, 0x8b, 0xe6, 0x39, 0x79, 0x2c, 0x27, 0x79, 0x0c,
++      0x7d, 0x4e, 0x1e, 0x1b, 0x6c, 0x79, 0xfc, 0x4c, 0xbf, 0x78, 0x4d, 0x0f,
++      0x8d, 0xeb, 0x2a, 0xca, 0x86, 0x54, 0x3b, 0xd5, 0xce, 0xd5, 0x4e, 0x6f,
++      0xc5, 0xf8, 0x9c, 0x8f, 0x69, 0xd5, 0x68, 0x08, 0x39, 0x0d, 0xb5, 0xe7,
++      0xb4, 0xd0, 0x52, 0xf7, 0x89, 0xe4, 0x26, 0x1f, 0xd5, 0x3f, 0x3b, 0x62,
++      0x91, 0xe4, 0x72, 0x11, 0x49, 0x38, 0x05, 0xe7, 0x15, 0x5d, 0xae, 0x2a,
++      0x9a, 0xd8, 0x47, 0xf1, 0xed, 0xc5, 0x9c, 0x44, 0xd8, 0x81, 0xdf, 0x3f,
++      0x73, 0xe2, 0x46, 0x82, 0x12, 0x4f, 0x10, 0xee, 0x78, 0x3c, 0xdb, 0x87,
++      0x27, 0xf2, 0xbd, 0x78, 0x3c, 0xff, 0x77, 0xde, 0xb5, 0x91, 0xbd, 0x46,
++      0x63, 0xa2, 0x72, 0x16, 0xe1, 0xe3, 0xc4, 0x75, 0x11, 0x96, 0xcd, 0x89,
++      0x16, 0x39, 0xc2, 0xb5, 0xae, 0xf3, 0x77, 0xdf, 0xd5, 0xd8, 0x17, 0x7b,
++      0x56, 0xbd, 0x64, 0x63, 0x91, 0x93, 0x6d, 0xc7, 0xec, 0x33, 0x52, 0xe5,
++      0x95, 0x7b, 0xec, 0x77, 0x41, 0x7d, 0xab, 0xef, 0xd2, 0xd8, 0x1f, 0x4e,
++      0xc4, 0xd7, 0xdb, 0xf9, 0xb5, 0x71, 0x6d, 0xe5, 0x3d, 0x99, 0xe0, 0xda,
++      0x4a, 0xaf, 0x26, 0xb0, 0x36, 0x6a, 0x7f, 0x86, 0xd6, 0x56, 0xf6, 0xba,
++      0xf5, 0xb5, 0x4d, 0xf6, 0x67, 0x74, 0x6d, 0xc5, 0xa7, 0xb4, 0xb5, 0x9a,
++      0xfd, 0x19, 0x5f, 0x5b, 0xc9, 0xcb, 0x2d, 0x6b, 0x97, 0x5e, 0x7d, 0xbf,
++      0x86, 0xff, 0xfe, 0x17, 0x9f, 0xed, 0x4e, 0xb2, 0x20, 0x3b, 0x00, 0x00,
++      0x00 };
+ static const u32 bnx2_TXP_b09FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_TXP_b09FwRodata[(0x30/4) + 1] = {
+@@ -4513,15 +4582,15 @@
+       0x00000000 };
+ static struct fw_info bnx2_txp_fw_09 = {
+-      /* Firmware version: 4.6.15 */
++      /* Firmware version: 4.4.23 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0xf,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x17,
+-      .start_addr                     = 0x08000098,
++      .start_addr                     = 0x08000094,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x3ae8,
++      .text_len                       = 0x3b1c,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_TXP_b09FwText,
+       .gz_text_len                    = sizeof(bnx2_TXP_b09FwText),
+@@ -4531,15 +4600,15 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_TXP_b09FwData,
+-      .sbss_addr                      = 0x08003b40,
++      .sbss_addr                      = 0x08003b80,
+       .sbss_len                       = 0x6c,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08003bac,
++      .bss_addr                       = 0x08003bec,
+       .bss_len                        = 0x24c,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x08003ae8,
++      .rodata_addr                    = 0x08003b1c,
+       .rodata_len                     = 0x30,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_TXP_b09FwRodata,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2_fw.h linux-2.6.29-rc3.owrt/drivers/net/bnx2_fw.h
+--- linux-2.6.29.owrt/drivers/net/bnx2_fw.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2_fw.h        2009-05-10 23:48:28.000000000 +0200
+@@ -15,849 +15,854 @@
+  */
+ static u8 bnx2_COM_b06FwText[] = {
+-      0xcd, 0x7c, 0x0d, 0x70, 0x5c, 0xd7, 0x75, 0xde, 0xd9, 0xb7, 0xbb, 0xc0,
+-      0x12, 0x04, 0xc1, 0x07, 0x68, 0x05, 0xad, 0x24, 0x24, 0xde, 0x87, 0x7d,
+-      0x00, 0x56, 0x22, 0xe4, 0x3c, 0x32, 0x10, 0x0d, 0xb9, 0x5b, 0x72, 0xbd,
+-      0x0b, 0x50, 0x90, 0x43, 0x23, 0x90, 0x84, 0x28, 0x6a, 0x86, 0xe3, 0x41,
+-      0x97, 0xa0, 0x62, 0x69, 0xdc, 0x86, 0x1e, 0x2b, 0x29, 0xe5, 0x2a, 0xe6,
+-      0x6a, 0x01, 0xca, 0x94, 0x02, 0x72, 0x61, 0x12, 0x04, 0xd5, 0x54, 0x6d,
+-      0xd7, 0x0b, 0x80, 0x54, 0xd4, 0x25, 0x97, 0x94, 0xfc, 0xa3, 0x99, 0xd8,
+-      0x21, 0x4a, 0xd1, 0x92, 0xed, 0x71, 0xa7, 0x92, 0xc7, 0x9d, 0xaa, 0x33,
+-      0x9a, 0x94, 0xa5, 0xe4, 0xda, 0xf1, 0x34, 0x8d, 0x6a, 0x7b, 0x1a, 0x25,
+-      0xb1, 0xf3, 0xfa, 0x7d, 0xf7, 0xdd, 0x0b, 0x2c, 0x20, 0x48, 0x56, 0x92,
+-      0xf1, 0x4c, 0x30, 0xb3, 0xbc, 0xef, 0xde, 0x77, 0x7f, 0xcf, 0x39, 0xf7,
+-      0x9c, 0xef, 0x9c, 0x7b, 0x1f, 0x77, 0x89, 0xb4, 0x88, 0xfe, 0xdb, 0x82,
+-      0xdf, 0xc0, 0xbf, 0xf8, 0x9d, 0xfd, 0xdb, 0x3f, 0xb8, 0xf3, 0x83, 0x78,
+-      0xdc, 0x69, 0xd9, 0x4d, 0x11, 0x96, 0x87, 0xf1, 0x8b, 0xe3, 0xb7, 0x43,
+-      0x3f, 0x6f, 0xf4, 0x67, 0xb3, 0x41, 0x48, 0x64, 0xe2, 0x87, 0x22, 0xa1,
+-      0x75, 0xef, 0x62, 0xef, 0xd2, 0xe6, 0xbd, 0xfe, 0xac, 0xf7, 0x59, 0xcf,
+-      0xfe, 0x7b, 0xf4, 0x6d, 0xfe, 0xc2, 0xba, 0xf9, 0x16, 0xfd, 0x93, 0x98,
+-      0x95, 0xb9, 0xfa, 0xb1, 0x9c, 0x2b, 0xb1, 0x70, 0xe6, 0xbb, 0xa3, 0xfb,
+-      0x5d, 0x91, 0x6c, 0x6d, 0x5b, 0x32, 0x2f, 0x3f, 0xf3, 0x8b, 0xf1, 0x88,
+-      0xb0, 0xfc, 0x97, 0x32, 0x3f, 0x3d, 0xfc, 0xb5, 0x0f, 0x39, 0x6f, 0x55,
+-      0xc2, 0x12, 0xb3, 0x33, 0x6f, 0x8b, 0xdd, 0x2b, 0xb1, 0x2e, 0xb4, 0x79,
+-      0xba, 0xef, 0x59, 0x4b, 0xda, 0x4c, 0x5f, 0xf6, 0x44, 0x38, 0x23, 0x63,
+-      0x93, 0x33, 0x87, 0x7d, 0xcb, 0x95, 0xe2, 0x4d, 0x19, 0x37, 0x59, 0x92,
+-      0xd6, 0xc1, 0xe9, 0x81, 0x0f, 0x09, 0xf2, 0x63, 0x93, 0xb5, 0x98, 0xe4,
+-      0xea, 0xc5, 0x56, 0xcb, 0x75, 0x91, 0xc6, 0x8a, 0x37, 0x67, 0x24, 0xd6,
+-      0x94, 0x79, 0xba, 0xf9, 0x25, 0x97, 0xe3, 0x27, 0x46, 0x73, 0xee, 0xcd,
+-      0x12, 0x71, 0x7d, 0x7f, 0x1a, 0xe3, 0xef, 0xa9, 0xfd, 0xcc, 0x7f, 0x2c,
+-      0x12, 0x8c, 0x6d, 0x65, 0x8a, 0x61, 0xa6, 0xa1, 0x4c, 0x72, 0xb4, 0xbb,
+-      0xa6, 0xf2, 0x4d, 0x41, 0xde, 0x35, 0xf9, 0x2d, 0x41, 0x7e, 0x42, 0xe7,
+-      0xed, 0x96, 0x60, 0x2d, 0xb1, 0x4d, 0x58, 0x4b, 0x2c, 0x92, 0x19, 0xda,
+-      0x84, 0x3e, 0x63, 0xd1, 0x8c, 0x9b, 0x59, 0x52, 0xf5, 0x3e, 0xa1, 0xeb,
+-      0x1d, 0x8c, 0x06, 0xed, 0x26, 0x47, 0x7b, 0x6b, 0x4c, 0x1f, 0x1e, 0xed,
+-      0x51, 0xe9, 0xa3, 0xa3, 0x29, 0x95, 0x16, 0x55, 0xbd, 0x50, 0x66, 0x7a,
+-      0xd4, 0x55, 0x69, 0x97, 0x2e, 0x4f, 0x8f, 0x26, 0x55, 0xda, 0xaf, 0x53,
+-      0x4f, 0xa7, 0x03, 0x3a, 0x1d, 0xd4, 0x69, 0x46, 0xa7, 0x59, 0x9d, 0x0e,
+-      0xe9, 0x7e, 0x46, 0x74, 0x7e, 0xaf, 0x4e, 0xc7, 0x74, 0x3a, 0xae, 0xd3,
+-      0xfb, 0x75, 0xba, 0x4f, 0xcf, 0xeb, 0x93, 0x3a, 0x7f, 0x50, 0xcf, 0xef,
+-      0x10, 0xe6, 0xf1, 0x93, 0x26, 0x2d, 0xbf, 0x58, 0x67, 0x52, 0xf6, 0xcf,
+-      0xc4, 0xa4, 0x54, 0x0e, 0x4b, 0x5e, 0xf1, 0xb5, 0x3f, 0x2a, 0x2d, 0x31,
+-      0x99, 0xaa, 0xc7, 0xe4, 0xaa, 0x12, 0xdb, 0x1f, 0xf8, 0x5f, 0xeb, 0xb3,
+-      0xe5, 0x42, 0x3d, 0x2e, 0x97, 0xea, 0x12, 0x1a, 0xeb, 0xdb, 0x24, 0xd6,
+-      0x89, 0x9b, 0x24, 0x6b, 0x87, 0x24, 0xac, 0xe8, 0x9b, 0x94, 0xdc, 0x4c,
+-      0x27, 0xf2, 0x4e, 0x42, 0x64, 0x32, 0x1a, 0xf0, 0x33, 0x26, 0xe1, 0x79,
+-      0xf2, 0x67, 0x7e, 0xf4, 0xa5, 0xb9, 0x84, 0x44, 0x8e, 0x27, 0xd1, 0x7f,
+-      0xab, 0x44, 0xe7, 0xa5, 0x2b, 0x2c, 0x3d, 0x89, 0x07, 0x50, 0x63, 0xa8,
+-      0x16, 0x91, 0xe1, 0x5a, 0x08, 0x3c, 0x8b, 0x41, 0x5e, 0x5a, 0xf1, 0xb3,
+-      0xf1, 0x8b, 0xe3, 0x97, 0xc0, 0xef, 0x09, 0xf4, 0xd3, 0x25, 0xf9, 0x1a,
+-      0xfb, 0xc4, 0xb8, 0x65, 0x8c, 0x5f, 0x76, 0xec, 0x09, 0xe1, 0x9c, 0x12,
+-      0xf2, 0xb5, 0xbe, 0x60, 0x4e, 0x97, 0xea, 0xb1, 0x50, 0xee, 0xb4, 0x1c,
+-      0xcc, 0x7b, 0x92, 0xb4, 0xdc, 0x16, 0x29, 0xd8, 0xa1, 0xe4, 0x64, 0xba,
+-      0x43, 0x8a, 0xe3, 0x78, 0x57, 0x96, 0xac, 0x85, 0xbe, 0x0b, 0xb6, 0x4c,
+-      0x04, 0xef, 0x58, 0xf6, 0x37, 0xd8, 0xb7, 0x8e, 0x4d, 0x01, 0xbe, 0x54,
+-      0xfe, 0x63, 0x3c, 0xb3, 0xaf, 0xff, 0x17, 0x0e, 0xe6, 0xfc, 0xd7, 0xc8,
+-      0xb3, 0xfc, 0xcb, 0x5b, 0x83, 0x3c, 0x9f, 0x59, 0xd7, 0x8c, 0x69, 0xd6,
+-      0xca, 0xb1, 0xfb, 0xb0, 0x5e, 0x8e, 0xbf, 0xb2, 0x5e, 0xcc, 0xa3, 0x35,
+-      0x94, 0x3f, 0x9d, 0x94, 0x23, 0xe5, 0x5d, 0x92, 0xf3, 0x7c, 0x7f, 0xbf,
+-      0x27, 0x71, 0x4b, 0x7a, 0xec, 0x3c, 0xde, 0x56, 0x6b, 0x12, 0xca, 0x95,
+-      0x0d, 0x3d, 0xd8, 0x6f, 0x04, 0x65, 0x9d, 0xa8, 0xdf, 0x16, 0x1a, 0x3a,
+-      0x8d, 0xb9, 0x67, 0x48, 0x17, 0xc8, 0xae, 0xd7, 0x93, 0x98, 0xc4, 0x78,
+-      0x0b, 0xb5, 0x1e, 0xef, 0xb2, 0xd8, 0xe8, 0xb3, 0x03, 0x75, 0x48, 0x23,
+-      0xf6, 0xc5, 0x3e, 0xd9, 0x5f, 0x2b, 0xda, 0xc6, 0xf1, 0x8e, 0x73, 0xf2,
+-      0xfd, 0x9c, 0x67, 0x33, 0x2f, 0x15, 0xd0, 0xad, 0x42, 0xba, 0xb5, 0x74,
+-      0xc9, 0x99, 0x1a, 0xc7, 0xd8, 0x68, 0xde, 0xb7, 0xfe, 0x23, 0x9b, 0x77,
+-      0x02, 0xfd, 0xc7, 0x91, 0x6e, 0x0e, 0xe5, 0x4e, 0xfa, 0x18, 0x3f, 0x81,
+-      0xe7, 0x8d, 0xd6, 0x70, 0x55, 0xcb, 0x60, 0x02, 0x73, 0x8f, 0xcb, 0x45,
+-      0x25, 0x87, 0x9b, 0x25, 0x0c, 0x39, 0x24, 0x8f, 0xdb, 0xe7, 0x6f, 0x97,
+-      0x42, 0xdc, 0x49, 0x52, 0x87, 0x76, 0xef, 0xd8, 0x84, 0x35, 0x6a, 0x6d,
+-      0x78, 0x3c, 0x0e, 0x39, 0xbc, 0xdc, 0x6e, 0xa1, 0xc4, 0x12, 0xc7, 0xfe,
+-      0x2d, 0x29, 0x4a, 0x7e, 0xf1, 0x91, 0x90, 0xb4, 0x58, 0xa8, 0xb7, 0x2d,
+-      0x14, 0xd0, 0x80, 0xf4, 0xc9, 0x82, 0x3e, 0x21, 0x09, 0xf6, 0x73, 0x56,
+-      0xba, 0x6b, 0xea, 0x7d, 0xd2, 0x52, 0xef, 0x86, 0xf0, 0x2e, 0x22, 0xa9,
+-      0x1d, 0xe6, 0xfd, 0x10, 0xde, 0xdf, 0x24, 0x13, 0x36, 0xe6, 0x52, 0x7e,
+-      0xc1, 0xca, 0x61, 0x8e, 0x1f, 0x89, 0xa8, 0xb5, 0xa2, 0xee, 0x44, 0x43,
+-      0x3f, 0x13, 0xa8, 0xf7, 0x34, 0xc6, 0xc2, 0x7c, 0xcb, 0x49, 0xcc, 0xa5,
+-      0x13, 0x73, 0xe1, 0x1c, 0x8b, 0x56, 0xae, 0x1e, 0x41, 0x7e, 0xda, 0xca,
+-      0x9f, 0x3d, 0x8a, 0x67, 0xb1, 0xad, 0xcc, 0x0b, 0x4c, 0xd1, 0x7e, 0x5f,
+-      0x43, 0xfb, 0x7d, 0x68, 0xcf, 0x31, 0xd8, 0x3e, 0x90, 0xff, 0xa2, 0x92,
+-      0xc5, 0xe4, 0x7b, 0xd0, 0x23, 0xfc, 0xf7, 0xa0, 0xc7, 0xd7, 0x34, 0x3d,
+-      0x7e, 0x26, 0xbf, 0x78, 0x7a, 0x5c, 0xfd, 0x05, 0xd1, 0x43, 0xa4, 0x70,
+-      0x92, 0xcf, 0x11, 0x29, 0x2a, 0xbd, 0xc5, 0x7d, 0x4b, 0x79, 0xa7, 0xce,
+-      0x22, 0x9d, 0x28, 0xc7, 0xd8, 0x03, 0xf5, 0x08, 0xd2, 0x67, 0x90, 0x6e,
+-      0x0e, 0x8d, 0x9d, 0x7c, 0x13, 0xfc, 0xf7, 0xc5, 0xde, 0x61, 0xec, 0x47,
+-      0x31, 0x61, 0x4b, 0x97, 0xd8, 0x1f, 0x84, 0xf1, 0xee, 0x74, 0xec, 0x82,
+-      0x7c, 0x9f, 0xef, 0x43, 0xc6, 0xce, 0xe7, 0x66, 0x36, 0xbd, 0x9d, 0x55,
+-      0x4f, 0x51, 0xd2, 0x33, 0x6b, 0x65, 0x22, 0xa1, 0x7c, 0x39, 0x39, 0x61,
+-      0x65, 0xe2, 0xd0, 0x53, 0xcc, 0x0f, 0x86, 0x82, 0x39, 0x0f, 0xa0, 0xae,
+-      0xd1, 0x59, 0x66, 0xee, 0x03, 0x98, 0xfb, 0x7a, 0xdd, 0x95, 0xc5, 0x5c,
+-      0x38, 0x07, 0xce, 0xab, 0xa8, 0x75, 0x10, 0xfb, 0x39, 0xa4, 0xfa, 0x09,
+-      0x67, 0x06, 0x85, 0xb6, 0xb4, 0x30, 0xc3, 0x7d, 0xc0, 0x76, 0xec, 0x2b,
+-      0xd0, 0xc9, 0x85, 0x9a, 0xe9, 0xa3, 0xd8, 0xd8, 0x07, 0xe6, 0x23, 0x5b,
+-      0x2d, 0x37, 0x0a, 0xde, 0xb3, 0xab, 0xa3, 0x78, 0xf7, 0xb4, 0xe4, 0xce,
+-      0xde, 0x61, 0x61, 0x0d, 0xe8, 0x97, 0x34, 0x1a, 0x83, 0xce, 0xe6, 0x3e,
+-      0x8b, 0x49, 0x3e, 0xce, 0xb2, 0x49, 0x3d, 0x6e, 0x44, 0xb2, 0x2a, 0x9f,
+-      0x6b, 0x5b, 0x9d, 0xc7, 0x0b, 0x7a, 0x3d, 0x19, 0xac, 0x87, 0x73, 0x30,
+-      0x6b, 0xc9, 0x34, 0xac, 0xc5, 0xd0, 0x9a, 0xb4, 0xb0, 0xa1, 0xe3, 0x63,
+-      0xda, 0x86, 0xb0, 0xdd, 0x74, 0x03, 0xef, 0xa6, 0xd1, 0x86, 0xb4, 0x47,
+-      0x9d, 0x75, 0x76, 0x85, 0x36, 0x65, 0x08, 0xfd, 0x94, 0xe6, 0x2c, 0xc9,
+-      0x7b, 0xb0, 0xd9, 0xde, 0xcd, 0x5a, 0x5e, 0x57, 0x65, 0x29, 0xba, 0xa1,
+-      0x2c, 0x3d, 0x66, 0x05, 0xfa, 0x1a, 0xb6, 0x05, 0xf6, 0x67, 0x6a, 0xce,
+-      0x49, 0x1b, 0x59, 0x2a, 0xcd, 0xbc, 0x1f, 0x59, 0x32, 0xed, 0x63, 0x90,
+-      0x5d, 0x33, 0xc6, 0xfa, 0x39, 0x9b, 0x3a, 0x98, 0x63, 0x79, 0x48, 0x63,
+-      0x15, 0x8e, 0x13, 0xd8, 0x86, 0xca, 0x1a, 0xdb, 0x70, 0x14, 0x6d, 0x25,
+-      0x94, 0xef, 0x6b, 0x95, 0x03, 0x73, 0xa6, 0x8f, 0xa3, 0x4a, 0x66, 0x27,
+-      0x67, 0x1c, 0x7b, 0x38, 0x2c, 0xd9, 0xe1, 0xd9, 0x41, 0x19, 0xaa, 0x77,
+-      0x81, 0xa7, 0x6f, 0xfb, 0xb0, 0x9d, 0x1f, 0x8c, 0x8a, 0x0b, 0xbd, 0x88,
+-      0x35, 0x0f, 0x80, 0xc6, 0xf5, 0xa8, 0x58, 0x19, 0x0f, 0x69, 0x23, 0xd6,
+-      0x8a, 0x44, 0x86, 0xd7, 0xe4, 0x9b, 0x50, 0x07, 0x7d, 0x0f, 0xac, 0xaf,
+-      0x07, 0xf9, 0x04, 0x6d, 0x73, 0xde, 0xcf, 0x7c, 0xd8, 0x61, 0x6d, 0xb3,
+-      0x58, 0x4a, 0x3d, 0x61, 0x74, 0xc4, 0x6f, 0x60, 0x7f, 0xab, 0xbd, 0x50,
+-      0x04, 0x76, 0x41, 0x1f, 0xa2, 0xe4, 0xb4, 0x54, 0x7f, 0xce, 0xec, 0x7b,
+-      0x55, 0xbe, 0x67, 0x80, 0xb2, 0x57, 0x01, 0x26, 0xe0, 0x9a, 0x16, 0xd5,
+-      0x5e, 0xcf, 0xdb, 0x71, 0x99, 0x2e, 0x73, 0x3d, 0x8b, 0x92, 0xaa, 0xfd,
+-      0x7b, 0xc9, 0x9f, 0x15, 0xf9, 0xd6, 0x0c, 0xeb, 0x7d, 0x55, 0xd7, 0x7b,
+-      0x01, 0xf5, 0x52, 0xc9, 0xa1, 0x90, 0x03, 0x3b, 0xe0, 0x60, 0x9b, 0x6c,
+-      0x4b, 0x22, 0xb5, 0x47, 0xf0, 0x1b, 0xa2, 0x91, 0x41, 0xbd, 0x00, 0xfb,
+-      0xbc, 0x00, 0x7a, 0x88, 0xdc, 0x5d, 0x6e, 0x86, 0x3e, 0xf9, 0x9f, 0x98,
+-      0x6b, 0x5c, 0x9e, 0xc4, 0x3a, 0x5e, 0x9a, 0x21, 0xbe, 0xfa, 0xaa, 0x2c,
+-      0xcd, 0x10, 0x6f, 0xbd, 0x20, 0xd3, 0x33, 0x29, 0xef, 0x5b, 0xa0, 0xf3,
+-      0x19, 0xe1, 0x5a, 0xb6, 0x79, 0x48, 0x81, 0x05, 0x9d, 0xe4, 0xe3, 0xd0,
+-      0x67, 0x7d, 0x3b, 0x82, 0xfe, 0x7a, 0x74, 0x7f, 0x6e, 0xcd, 0x91, 0xab,
+-      0x36, 0xf5, 0xd3, 0x3b, 0xf7, 0x78, 0x4e, 0xef, 0xf1, 0x31, 0xaf, 0x4b,
+-      0x2c, 0xec, 0xeb, 0xec, 0x78, 0x11, 0xd6, 0x8f, 0xfb, 0xfa, 0x6d, 0x6b,
+-      0x15, 0xff, 0x24, 0x80, 0x59, 0x1d, 0x65, 0xef, 0xfe, 0x6e, 0x7b, 0xbc,
+-      0x71, 0x6f, 0x73, 0xfc, 0x36, 0xb4, 0x89, 0x20, 0x7d, 0xef, 0x7d, 0x8d,
+-      0x3e, 0x1a, 0xda, 0x0e, 0x72, 0x5f, 0xa0, 0xcd, 0xbf, 0x05, 0x2d, 0x48,
+-      0xff, 0xf7, 0xb3, 0x9f, 0x6f, 0x0b, 0xbf, 0xaf, 0xfd, 0x3c, 0xfe, 0x5e,
+-      0xfb, 0xb9, 0x71, 0x2f, 0x5f, 0x20, 0x2d, 0x30, 0xb6, 0xcc, 0x06, 0xb2,
+-      0xd5, 0x03, 0x5a, 0x27, 0x21, 0xa7, 0x98, 0x43, 0xf9, 0x6f, 0xfd, 0x6c,
+-      0x24, 0xc0, 0x73, 0x81, 0x3c, 0xb1, 0x9e, 0xa9, 0x13, 0xe8, 0xde, 0xa1,
+-      0xfa, 0x55, 0xa5, 0x67, 0x2f, 0x2a, 0x3d, 0xeb, 0x1c, 0x2d, 0x0a, 0xe5,
+-      0xed, 0xf6, 0x30, 0xe9, 0x7e, 0xc1, 0xfb, 0x7d, 0xcc, 0xd1, 0x49, 0x26,
+-      0xad, 0x9e, 0xa2, 0x65, 0xfd, 0xbe, 0x1c, 0x5c, 0x78, 0x58, 0x0e, 0x96,
+-      0xd9, 0xc7, 0x2e, 0xbc, 0x77, 0x51, 0xb6, 0x09, 0xba, 0x96, 0x3a, 0xfd,
+-      0xed, 0x50, 0x30, 0x96, 0x05, 0xfb, 0xb5, 0x1c, 0xba, 0xbb, 0x7e, 0x25,
+-      0x94, 0x5b, 0xe0, 0xde, 0x45, 0x79, 0xbd, 0x51, 0xe7, 0x1b, 0x7d, 0xff,
+-      0x0a, 0xc6, 0x34, 0x72, 0xee, 0x35, 0xe8, 0xd4, 0x69, 0xe2, 0x41, 0x2b,
+-      0xe7, 0x91, 0x7f, 0xb4, 0x2d, 0x8f, 0xd8, 0xc1, 0xfa, 0x0f, 0x81, 0x66,
+-      0xb4, 0x49, 0xa4, 0x21, 0xec, 0x61, 0x84, 0xfb, 0x97, 0xcf, 0xe2, 0x87,
+-      0x33, 0xdc, 0x83, 0x12, 0x09, 0x67, 0x80, 0x7f, 0xe3, 0xac, 0xb3, 0x0b,
+-      0x73, 0x0e, 0xf6, 0x77, 0x71, 0x65, 0x7f, 0x77, 0xcb, 0xc4, 0x42, 0x16,
+-      0x3a, 0x20, 0xaf, 0xfa, 0x89, 0xba, 0x6b, 0x6c, 0x0b, 0xea, 0x27, 0x35,
+-      0x1f, 0x36, 0x1b, 0xfd, 0x87, 0x32, 0x4f, 0x97, 0x35, 0x35, 0x94, 0x19,
+-      0x7e, 0x15, 0x30, 0x16, 0x6d, 0xc4, 0x88, 0xc6, 0x3d, 0xbe, 0x9f, 0x27,
+-      0x9f, 0xfb, 0xf7, 0x09, 0xf7, 0xc4, 0xa5, 0x72, 0xd1, 0x0e, 0x2b, 0xd9,
+-      0x5c, 0xfc, 0xd8, 0xaa, 0x6c, 0x02, 0x27, 0xab, 0x5e, 0x48, 0x5b, 0xce,
+-      0xa5, 0x15, 0xb4, 0x1c, 0xc2, 0x1a, 0x40, 0xb3, 0xce, 0x10, 0xe8, 0xd6,
+-      0x2a, 0x85, 0xfa, 0x2e, 0xfd, 0x8e, 0xe5, 0x11, 0x19, 0x8b, 0x1b, 0x3b,
+-      0xf4, 0xe7, 0x5b, 0x03, 0xac, 0x8b, 0x3a, 0xe5, 0xff, 0x1d, 0x0e, 0x64,
+-      0xdf, 0x96, 0xc2, 0xe9, 0x21, 0xc8, 0x18, 0xb1, 0xd8, 0x26, 0x2d, 0x63,
+-      0xec, 0x07, 0xe5, 0x67, 0x29, 0xc3, 0xa2, 0xf5, 0xe7, 0x20, 0xd2, 0x1f,
+-      0x87, 0x69, 0xb7, 0xd9, 0x57, 0xe1, 0xb4, 0x69, 0x6f, 0xe6, 0xd1, 0xb1,
+-      0xd2, 0xcf, 0x98, 0x67, 0x49, 0x58, 0xcd, 0x05, 0x65, 0x67, 0xd7, 0xce,
+-      0xc5, 0xea, 0x34, 0x73, 0x79, 0x34, 0x1c, 0xcc, 0xa5, 0xa3, 0xa1, 0xaf,
+-      0x78, 0xc3, 0x5c, 0x9a, 0x30, 0x97, 0xb8, 0xb2, 0x37, 0x9c, 0xcb, 0x05,
+-      0xf0, 0xbe, 0x70, 0xf6, 0xc6, 0xeb, 0x82, 0x36, 0xf1, 0x86, 0x36, 0x9d,
+-      0xeb, 0xda, 0xb0, 0xbe, 0x19, 0x03, 0xef, 0xce, 0x5e, 0xdd, 0x1c, 0xb4,
+-      0x61, 0xbd, 0x26, 0xd8, 0x37, 0xbe, 0x53, 0x7e, 0x5b, 0x83, 0xfc, 0x1f,
+-      0x84, 0xfc, 0x1b, 0xb9, 0x32, 0xb6, 0xd9, 0xf0, 0x75, 0x53, 0x28, 0x7f,
+-      0xf2, 0x03, 0xf4, 0x3d, 0x43, 0x63, 0xe5, 0x25, 0xf8, 0x0f, 0x49, 0x29,
+-      0xa4, 0xe1, 0x9b, 0xd8, 0x83, 0xa2, 0xfc, 0x89, 0x34, 0x7c, 0x16, 0x7b,
+-      0xb3, 0xc2, 0x5b, 0x85, 0x74, 0xbf, 0xb6, 0x59, 0xdf, 0x97, 0x09, 0xc8,
+-      0x70, 0x21, 0x9d, 0xc6, 0x78, 0xd0, 0xd5, 0x6e, 0x2f, 0xda, 0x71, 0xdc,
+-      0xb7, 0x22, 0xb4, 0x23, 0x17, 0xca, 0x1f, 0x47, 0x7e, 0x33, 0xde, 0xff,
+-      0xa9, 0x9e, 0x4f, 0x1b, 0xea, 0x7c, 0x5a, 0xf9, 0x26, 0x17, 0x54, 0x1d,
+-      0xf6, 0x71, 0x19, 0xf9, 0x3b, 0x50, 0x07, 0x9b, 0x1c, 0x12, 0x68, 0xb9,
+-      0x3b, 0xf1, 0xfb, 0x36, 0xca, 0x3e, 0x84, 0xb2, 0x2f, 0xa3, 0xec, 0x76,
+-      0xe4, 0x5f, 0x5c, 0xd7, 0xef, 0x36, 0xe4, 0x1f, 0xc3, 0x7b, 0xac, 0xd3,
+-      0xfe, 0x06, 0xde, 0xdf, 0x81, 0xdf, 0x97, 0xd7, 0xd5, 0xf9, 0x37, 0xeb,
+-      0xf2, 0xc6, 0x2f, 0xf8, 0x63, 0x2d, 0x73, 0xc6, 0x27, 0x08, 0xf4, 0xe8,
+-      0x54, 0xb9, 0x35, 0x34, 0x7c, 0x3a, 0x16, 0xda, 0x73, 0x9a, 0x78, 0x23,
+-      0xa2, 0xfc, 0x80, 0x08, 0xfc, 0x80, 0xe9, 0x39, 0x3a, 0x88, 0x11, 0x94,
+-      0x11, 0xbb, 0xcb, 0x40, 0x93, 0xf4, 0x78, 0x57, 0xb0, 0x4f, 0x0a, 0xb5,
+-      0x2e, 0xe4, 0xb9, 0x7f, 0x20, 0x63, 0xb5, 0x16, 0xc8, 0x75, 0x4f, 0xba,
+-      0x0a, 0x19, 0x3b, 0x00, 0xdf, 0x64, 0x02, 0x36, 0x70, 0xa2, 0xd6, 0x25,
+-      0x0f, 0xd4, 0xae, 0x44, 0x02, 0x39, 0x32, 0x63, 0x3f, 0xbd, 0x6e, 0xec,
+-      0x18, 0xfd, 0x0a, 0xc8, 0xfd, 0xfc, 0xe8, 0xfe, 0x39, 0x8e, 0x6f, 0x75,
+-      0x47, 0xa4, 0x0d, 0x73, 0xa0, 0xff, 0x28, 0xbd, 0x11, 0xe9, 0x49, 0x4e,
+-      0x29, 0x07, 0xb5, 0x28, 0xe1, 0x4c, 0x0f, 0xec, 0x83, 0xca, 0xc3, 0x5f,
+-      0x84, 0xbe, 0xab, 0xad, 0xfa, 0x91, 0xc3, 0x2b, 0x7e, 0x64, 0x17, 0xfc,
+-      0xcc, 0x17, 0x23, 0xc1, 0xde, 0x6f, 0x85, 0x6e, 0xb8, 0x9e, 0x38, 0x47,
+-      0xe9, 0x77, 0xee, 0xf1, 0x9c, 0xd7, 0xae, 0xf3, 0x94, 0x65, 0xe8, 0x0b,
+-      0x2b, 0xaa, 0xf4, 0x95, 0x58, 0x78, 0x37, 0x40, 0xf9, 0x45, 0x7e, 0xa1,
+-      0x71, 0x7f, 0xff, 0x0e, 0xf6, 0x32, 0xdf, 0x1b, 0x39, 0xc3, 0x3f, 0x4a,
+-      0xc6, 0x18, 0xbf, 0xf8, 0x8b, 0x75, 0x6b, 0x3b, 0xb0, 0x6e, 0x6d, 0x91,
+-      0x15, 0xba, 0x72, 0x8d, 0x51, 0xac, 0x71, 0x69, 0x8e, 0xb4, 0xed, 0x87,
+-      0x7c, 0x8a, 0x1b, 0x11, 0xca, 0x31, 0xf5, 0x6a, 0x1b, 0x74, 0x35, 0x69,
+-      0x17, 0x11, 0xc6, 0x3c, 0x26, 0xb0, 0xa6, 0x09, 0xac, 0x69, 0xa2, 0x81,
+-      0x8e, 0x07, 0x56, 0xd6, 0x64, 0xe6, 0x8d, 0x7a, 0x6a, 0xbf, 0xf1, 0x99,
+-      0x3f, 0xe8, 0xa9, 0x36, 0x83, 0x69, 0x38, 0x97, 0xdc, 0xba, 0xb9, 0x90,
+-      0x16, 0x9c, 0xcb, 0xca, 0x3c, 0xe2, 0x8c, 0x1c, 0x1d, 0xac, 0x91, 0xaf,
+-      0x1c, 0x73, 0xaf, 0x4c, 0x96, 0x3f, 0xa0, 0xe7, 0xd1, 0x8a, 0x79, 0x8c,
+-      0x41, 0x6f, 0x70, 0x3c, 0xec, 0xff, 0xda, 0x38, 0x9e, 0xe3, 0xe4, 0xbf,
+-      0x9e, 0x8b, 0xa1, 0x05, 0xfd, 0xb6, 0x84, 0xc6, 0xe2, 0x86, 0x5e, 0xae,
+-      0xc2, 0x0e, 0x97, 0xca, 0xff, 0x6d, 0x6b, 0x30, 0xb7, 0xa4, 0x9e, 0x47,
+-      0x40, 0x63, 0x60, 0x78, 0x60, 0xa9, 0xbc, 0xd6, 0x07, 0x8d, 0x74, 0xbd,
+-      0xbb, 0x49, 0xeb, 0x2b, 0xc8, 0x40, 0x63, 0xf9, 0xa7, 0x9a, 0x56, 0xeb,
+-      0x32, 0x3f, 0xaf, 0xf3, 0x5b, 0x42, 0xc3, 0x27, 0x4d, 0xd9, 0xd5, 0xa6,
+-      0x77, 0xf6, 0xf7, 0xd5, 0x26, 0xa3, 0x3f, 0x2e, 0x95, 0x1b, 0xf7, 0xfb,
+-      0x21, 0x2b, 0xb0, 0x3b, 0x45, 0x29, 0x0d, 0x64, 0xa1, 0xe7, 0x68, 0x7f,
+-      0x86, 0xac, 0xc0, 0xf6, 0xb0, 0xce, 0x21, 0x85, 0x1d, 0x23, 0x99, 0x2a,
+-      0xe5, 0x1e, 0xb4, 0xac, 0x8d, 0xe6, 0x66, 0x7c, 0x7f, 0xca, 0x5b, 0x4e,
+-      0x84, 0x85, 0x7a, 0x99, 0xb8, 0x8d, 0xe5, 0xcf, 0xa0, 0x1c, 0x76, 0xbd,
+-      0x3e, 0x26, 0x6c, 0xb7, 0x31, 0x3e, 0x4b, 0x6a, 0x7c, 0x16, 0x00, 0xbb,
+-      0x9c, 0xc2, 0x53, 0x4f, 0x8d, 0xc2, 0xfe, 0xeb, 0xe7, 0xa7, 0xf1, 0x9c,
+-      0x6c, 0xc4, 0x80, 0xe8, 0xb7, 0x32, 0x9a, 0x9b, 0x53, 0x76, 0x00, 0xfb,
+-      0x81, 0xbc, 0x3a, 0x03, 0x5e, 0x85, 0x64, 0x5a, 0xd9, 0x04, 0xce, 0x83,
+-      0xed, 0x2a, 0xa3, 0xdd, 0x8b, 0x4c, 0xab, 0xa3, 0xee, 0x62, 0x58, 0x0e,
+-      0xc4, 0x83, 0xb6, 0xcc, 0x27, 0x17, 0x8d, 0xdd, 0x6e, 0x91, 0x68, 0x86,
+-      0xba, 0xcd, 0x49, 0x03, 0x87, 0x62, 0x3d, 0x47, 0x47, 0xa7, 0x5d, 0xda,
+-      0xcb, 0xff, 0x03, 0x79, 0x68, 0x91, 0x26, 0x25, 0x27, 0x4f, 0xea, 0xb1,
+-      0xce, 0x60, 0xac, 0xad, 0x98, 0x6b, 0x18, 0x3a, 0x32, 0x92, 0xc0, 0x38,
+-      0x87, 0x2d, 0x77, 0x1b, 0xc6, 0xa3, 0xd7, 0xd8, 0x25, 0x53, 0x75, 0xca,
+-      0xfa, 0xdf, 0x44, 0x56, 0x7d, 0xc5, 0x13, 0x68, 0x67, 0x7c, 0x14, 0x8e,
+-      0x57, 0x05, 0x46, 0x69, 0xc1, 0x3a, 0x1c, 0x3b, 0x17, 0x86, 0xed, 0x9b,
+-      0x33, 0x75, 0x38, 0xa7, 0xe3, 0xa3, 0xa9, 0xc5, 0x14, 0xfa, 0xea, 0xa2,
+-      0xec, 0x41, 0xe6, 0xc2, 0xf8, 0xb1, 0x6f, 0xb6, 0x83, 0x4e, 0x1e, 0x34,
+-      0x76, 0x7c, 0xb5, 0xbd, 0x69, 0xd7, 0xbd, 0x38, 0xa2, 0x65, 0xf7, 0xaf,
+-      0xfc, 0xec, 0x38, 0xdf, 0x37, 0xc6, 0x07, 0x4c, 0x3b, 0x53, 0x27, 0xac,
+-      0xf5, 0xf1, 0x7d, 0xd1, 0xd5, 0x79, 0x3e, 0x35, 0x1a, 0xf8, 0x31, 0x12,
+-      0xc9, 0xf7, 0x0d, 0x6a, 0xbe, 0x3d, 0x8d, 0x32, 0xb6, 0xc7, 0x5e, 0xa8,
+-      0x37, 0x62, 0xf0, 0xa0, 0xdf, 0x22, 0xb0, 0x47, 0xa9, 0xdc, 0x04, 0x5d,
+-      0x93, 0x6d, 0x0f, 0x62, 0x22, 0xef, 0x85, 0xbb, 0xc1, 0x53, 0xf4, 0x53,
+-      0x5a, 0x69, 0xab, 0xe2, 0x93, 0xa3, 0x2f, 0xa1, 0xff, 0x23, 0xe5, 0x60,
+-      0xaf, 0x05, 0x74, 0x20, 0x5e, 0x0a, 0xc9, 0x92, 0x9b, 0x84, 0x7f, 0x47,
+-      0x3b, 0x94, 0x94, 0x97, 0x5d, 0x83, 0x9f, 0x88, 0x9d, 0x50, 0xbf, 0xce,
+-      0xf9, 0x70, 0xdd, 0x27, 0xb0, 0x6e, 0x5f, 0x66, 0xbd, 0x40, 0x3e, 0xfa,
+-      0xb0, 0x37, 0xff, 0x53, 0xc4, 0x39, 0x4a, 0x3f, 0xe0, 0x6a, 0xa4, 0x71,
+-      0x5d, 0xc6, 0x9e, 0x3d, 0xa5, 0x63, 0x93, 0x27, 0x34, 0x2f, 0x2b, 0xe0,
+-      0xe5, 0xb6, 0xa4, 0x2d, 0xbd, 0x98, 0x3b, 0xea, 0xf4, 0xf7, 0x00, 0x8f,
+-      0xd3, 0xd7, 0x4b, 0x60, 0x3e, 0x36, 0x64, 0x7d, 0xab, 0xb6, 0xfb, 0x9f,
+-      0x89, 0x52, 0x5f, 0xb4, 0xab, 0xb8, 0xe7, 0x09, 0x25, 0x6b, 0x81, 0xec,
+-      0x85, 0xf5, 0x7b, 0xc3, 0xef, 0x30, 0xcd, 0xae, 0xac, 0xc6, 0xf9, 0x8c,
+-      0xae, 0x66, 0xfd, 0x39, 0xd4, 0x0f, 0x61, 0x4d, 0xbe, 0x3f, 0xa9, 0xe6,
+-      0x3b, 0x0f, 0x5e, 0x87, 0xa5, 0xb4, 0x22, 0x8f, 0xf3, 0x90, 0xc7, 0x26,
+-      0x91, 0x8e, 0x46, 0xb9, 0xa1, 0xac, 0xbc, 0x1e, 0x65, 0x4c, 0x2e, 0x69,
+-      0x19, 0xde, 0x45, 0x88, 0xdd, 0x90, 0x37, 0xbc, 0xe3, 0xf3, 0x46, 0x18,
+-      0x90, 0x71, 0x27, 0xdf, 0x5f, 0xf2, 0x18, 0x23, 0x6c, 0x96, 0xa2, 0x1d,
+-      0xe0, 0x97, 0x92, 0x47, 0x39, 0xcd, 0x25, 0x23, 0xe2, 0x24, 0x0e, 0xc8,
+-      0x9b, 0xe8, 0x3b, 0x9b, 0x8e, 0x4a, 0xe0, 0xa7, 0x4e, 0x80, 0x6e, 0xcb,
+-      0xb6, 0xef, 0xbf, 0x04, 0xbf, 0xba, 0x0a, 0xbf, 0x66, 0x09, 0x69, 0xa9,
+-      0x86, 0x3d, 0xd0, 0x12, 0xc1, 0x9e, 0x32, 0x7b, 0x25, 0x26, 0x15, 0xd4,
+-      0x59, 0xc0, 0xbb, 0xc7, 0x6b, 0x86, 0xcb, 0xbe, 0x6f, 0x61, 0x5d, 0xfb,
+-      0xdd, 0xbf, 0xf6, 0x0b, 0xf1, 0xc6, 0xba, 0x06, 0x77, 0x11, 0x33, 0x11,
+-      0xf3, 0x10, 0xab, 0xf0, 0x1d, 0xf1, 0xc7, 0x61, 0xcc, 0x85, 0x32, 0xdc,
+-      0x26, 0xb1, 0x8c, 0x93, 0x18, 0x11, 0xa3, 0x8b, 0x5f, 0x03, 0xff, 0x8b,
+-      0x7e, 0xb3, 0xdb, 0x25, 0xcf, 0x83, 0xd7, 0xcf, 0xd5, 0x0d, 0xef, 0x93,
+-      0xe0, 0xbd, 0x53, 0x2c, 0x8a, 0x2f, 0x17, 0x3d, 0x37, 0xf9, 0x39, 0xa4,
+-      0xdf, 0xf1, 0x7e, 0x85, 0xb4, 0x78, 0x0a, 0x26, 0x0f, 0x38, 0x1b, 0x7a,
+-      0x75, 0xd6, 0xe0, 0xc7, 0x36, 0xe2, 0x7d, 0x4d, 0xc7, 0xab, 0xe8, 0xd3,
+-      0xb1, 0x2d, 0x80, 0xa5, 0x3b, 0x51, 0x2f, 0x90, 0x6b, 0x53, 0x76, 0x18,
+-      0x75, 0x39, 0x07, 0xfa, 0x62, 0xdf, 0xc5, 0x5e, 0xf2, 0xfd, 0x7b, 0xbd,
+-      0xc9, 0x86, 0x3d, 0x31, 0x0f, 0x1e, 0x28, 0xd9, 0x1c, 0x68, 0x17, 0xc6,
+-      0xee, 0xa4, 0xbf, 0x43, 0xf9, 0x0a, 0x7c, 0x86, 0x8c, 0x0e, 0xd0, 0x26,
+-      0x24, 0x55, 0xdc, 0x8f, 0xb6, 0xe7, 0x39, 0xd0, 0xfe, 0xd3, 0x35, 0xf2,
+-      0xa1, 0x55, 0xe9, 0xfe, 0xe7, 0xcb, 0xb4, 0xef, 0x01, 0x46, 0x9b, 0x50,
+-      0xb1, 0x5c, 0xda, 0x84, 0x34, 0x78, 0x13, 0xc4, 0xf0, 0x1e, 0x50, 0x6d,
+-      0x59, 0x8f, 0x6d, 0x1b, 0xf9, 0xc7, 0x3a, 0x5b, 0x81, 0xaf, 0x28, 0x83,
+-      0x6d, 0xc0, 0x25, 0xed, 0x72, 0x20, 0xdd, 0x0c, 0xba, 0x77, 0x28, 0x3c,
+-      0x65, 0xb9, 0x1f, 0x86, 0xed, 0x02, 0xa6, 0xb3, 0x1d, 0x6f, 0xd5, 0xf7,
+-      0xb8, 0x1d, 0x65, 0x3f, 0x05, 0xfd, 0x59, 0xb6, 0x49, 0xc7, 0xaf, 0x1f,
+-      0xc6, 0xfe, 0xab, 0x6c, 0x0d, 0xe2, 0x22, 0xe4, 0x83, 0xd1, 0x03, 0xc6,
+-      0xfe, 0xd9, 0x1a, 0x47, 0x92, 0x37, 0x41, 0x0c, 0xc5, 0x52, 0x75, 0x89,
+-      0xe7, 0x1b, 0xfd, 0x16, 0xee, 0x3b, 0xdf, 0xbf, 0xe8, 0x29, 0x7b, 0x0a,
+-      0x1e, 0xec, 0x86, 0x0d, 0x8b, 0x68, 0x5a, 0xb7, 0x82, 0xd6, 0x81, 0x8d,
+-      0x4d, 0x76, 0x40, 0xef, 0xb8, 0x56, 0x53, 0x40, 0x3f, 0x62, 0x85, 0xbf,
+-      0x85, 0x1f, 0x4f, 0xff, 0x81, 0x38, 0x81, 0x73, 0x47, 0xbb, 0x05, 0xd6,
+-      0xa5, 0x2d, 0x7e, 0x0c, 0x63, 0x84, 0x25, 0xd9, 0xc9, 0xfc, 0x03, 0xba,
+-      0x0d, 0x9f, 0x7d, 0xe9, 0xdd, 0xd1, 0x28, 0xcf, 0x83, 0x98, 0x27, 0xd7,
+-      0x63, 0xe2, 0x7a, 0x5d, 0x4a, 0x07, 0xac, 0xca, 0x85, 0x99, 0x93, 0x19,
+-      0x97, 0x73, 0x4b, 0x48, 0x07, 0xe6, 0x76, 0x37, 0x74, 0xf4, 0x8e, 0x0e,
+-      0xf6, 0x69, 0xc6, 0x6e, 0x9c, 0x93, 0xc1, 0x2f, 0x81, 0xdd, 0x8d, 0xba,
+-      0xcd, 0xb2, 0xa3, 0x93, 0xb4, 0xeb, 0x52, 0xba, 0x7a, 0x95, 0x1f, 0xb4,
+-      0xbf, 0x1c, 0x7b, 0x7d, 0xf9, 0x1d, 0x0d, 0xf3, 0x6a, 0x3c, 0x03, 0x20,
+-      0x76, 0xd8, 0x89, 0x77, 0x9c, 0x13, 0x9c, 0xe4, 0xb8, 0x2f, 0x7b, 0x14,
+-      0xdd, 0x38, 0xb7, 0xc6, 0x79, 0x10, 0x43, 0x71, 0xce, 0x9c, 0xc3, 0x7a,
+-      0x6c, 0xc2, 0xf9, 0xfc, 0x57, 0xcd, 0xc3, 0x4d, 0x7a, 0x5d, 0x06, 0xcb,
+-      0xa4, 0xd0, 0xf6, 0x3f, 0x60, 0x0d, 0x7c, 0xe6, 0x3a, 0x8c, 0xcd, 0x4e,
+-      0x05, 0xfd, 0xb4, 0x98, 0x78, 0xb0, 0x89, 0x6b, 0x70, 0x5e, 0xdc, 0x33,
+-      0x86, 0x4e, 0x1d, 0x9a, 0x47, 0xbb, 0xd7, 0x8d, 0xeb, 0x78, 0x6b, 0xf5,
+-      0xc8, 0xed, 0x0d, 0xeb, 0xeb, 0x97, 0xe2, 0x02, 0xe5, 0xe2, 0x36, 0xa4,
+-      0x06, 0x13, 0x0c, 0x40, 0xf7, 0xbf, 0x2b, 0x26, 0xe0, 0x59, 0xd5, 0x78,
+-      0x01, 0x3e, 0x99, 0xd2, 0xfd, 0x6a, 0x2f, 0xc6, 0x90, 0x87, 0x3e, 0xa9,
+-      0xdf, 0x43, 0x19, 0x1b, 0x9f, 0xa8, 0x79, 0xe3, 0x93, 0xb5, 0x81, 0x71,
+-      0xe2, 0xa9, 0x40, 0xe6, 0x50, 0xbf, 0x26, 0x13, 0xf0, 0xb3, 0xc7, 0x73,
+-      0xaa, 0x9d, 0x8a, 0x31, 0x6c, 0xd0, 0x8f, 0x70, 0x3f, 0x4e, 0x04, 0x63,
+-      0xc5, 0xc6, 0xf3, 0xd0, 0x41, 0x0b, 0xb3, 0xb0, 0x4b, 0xae, 0x93, 0xa5,
+-      0x5c, 0xee, 0xf7, 0x9c, 0x11, 0x25, 0x7b, 0x71, 0x67, 0x8c, 0xbc, 0xac,
+-      0xce, 0xfe, 0xb2, 0x2c, 0xcc, 0xf9, 0x72, 0x17, 0x74, 0xe1, 0x43, 0x90,
+-      0x55, 0x39, 0x07, 0x45, 0x78, 0x0e, 0xca, 0xeb, 0x5c, 0x5c, 0xac, 0x53,
+-      0x5d, 0x12, 0x3d, 0x96, 0x90, 0xc8, 0x31, 0x62, 0xcb, 0x94, 0x7d, 0x97,
+-      0x08, 0xec, 0xd8, 0x8b, 0x1f, 0xb2, 0xc4, 0x19, 0xcc, 0x4a, 0x2a, 0xf9,
+-      0x38, 0x6c, 0x6f, 0x15, 0x69, 0x49, 0x52, 0xe9, 0xb3, 0xe8, 0x2b, 0x7a,
+-      0x0e, 0x75, 0xd1, 0x6e, 0xd3, 0x52, 0x12, 0xbf, 0x4e, 0x69, 0x59, 0x0a,
+-      0xf6, 0x4a, 0xcb, 0xd2, 0x5a, 0xff, 0x7c, 0x68, 0xc5, 0x3f, 0xe7, 0xfb,
+-      0xb7, 0x75, 0x5c, 0xe1, 0x8b, 0xfa, 0x8c, 0x81, 0x32, 0x42, 0x7b, 0xa4,
+-      0x7c, 0x63, 0xe8, 0xfd, 0x2f, 0xc2, 0xc7, 0x02, 0x0e, 0x2c, 0xc3, 0x97,
+-      0xca, 0xf8, 0xf2, 0xac, 0x57, 0xf4, 0x73, 0x03, 0xbe, 0xbc, 0xe6, 0xb9,
+-      0xc5, 0x82, 0x38, 0x6f, 0x53, 0xdf, 0xfd, 0x85, 0xf7, 0x4f, 0xe4, 0xfe,
+-      0x76, 0xe7, 0xfe, 0x6c, 0xa8, 0xe8, 0xb7, 0xc2, 0xb7, 0xba, 0x31, 0x73,
+-      0x58, 0xf6, 0x6f, 0x5f, 0x86, 0x0f, 0x9c, 0xbd, 0x11, 0x38, 0x2b, 0x51,
+-      0x50, 0xba, 0xea, 0x75, 0xe5, 0xb7, 0x7d, 0xa2, 0xe7, 0xb0, 0x6c, 0xd9,
+-      0xee, 0xd8, 0xd7, 0xc2, 0xc4, 0x40, 0x87, 0x25, 0x0f, 0xfd, 0x9f, 0x0f,
+-      0xbb, 0xf6, 0x5e, 0x71, 0x46, 0x1e, 0x11, 0x9e, 0x0d, 0xba, 0xd2, 0x7d,
+-      0xcc, 0x4d, 0x7c, 0x32, 0xd4, 0x7b, 0xf0, 0x93, 0xc0, 0xae, 0xdd, 0xe7,
+-      0x98, 0xf7, 0x25, 0xb6, 0xdd, 0xc6, 0x73, 0x5c, 0xba, 0x4f, 0x25, 0x25,
+-      0x05, 0xba, 0xf4, 0x29, 0x9a, 0xf0, 0x6c, 0x22, 0x21, 0xbd, 0xc7, 0x88,
+-      0x49, 0x14, 0x6d, 0xfa, 0x40, 0x9b, 0x34, 0x68, 0x03, 0x9f, 0x66, 0x9b,
+-      0x7d, 0x0d, 0xe9, 0x65, 0x49, 0x0d, 0x7e, 0x0f, 0xb4, 0xe9, 0x03, 0x6d,
+-      0x7a, 0xcf, 0x25, 0xd1, 0x1e, 0x7d, 0x2c, 0x75, 0x23, 0x6d, 0x91, 0x5f,
+-      0xbb, 0xbe, 0x13, 0xcf, 0xae, 0xa4, 0x8e, 0xc5, 0x30, 0x46, 0x48, 0xf6,
+-      0xf4, 0x14, 0x65, 0x78, 0x3b, 0x30, 0x74, 0xfc, 0xb0, 0x5c, 0x81, 0x1d,
+-      0x2a, 0xc3, 0x7f, 0x7b, 0x76, 0xd0, 0x19, 0x5b, 0x86, 0x2e, 0xad, 0xdf,
+-      0xed, 0xcb, 0x37, 0xb6, 0x7f, 0xd3, 0x4f, 0x5c, 0xef, 0xdc, 0x2f, 0xa1,
+-      0x01, 0x99, 0x2e, 0x2b, 0xfb, 0x90, 0xc8, 0x85, 0x15, 0xd6, 0xc1, 0x1a,
+-      0x8b, 0xb0, 0x31, 0x3c, 0xf3, 0x74, 0xa1, 0xeb, 0x1f, 0x91, 0x87, 0x2a,
+-      0x53, 0xf8, 0x01, 0x77, 0xcf, 0xb0, 0xee, 0x41, 0xe0, 0xed, 0x87, 0xe5,
+-      0xc0, 0x0c, 0xb0, 0x58, 0x06, 0xf3, 0x1e, 0x70, 0x81, 0xcb, 0x33, 0xcd,
+-      0xd2, 0x86, 0x32, 0xd0, 0x76, 0xac, 0xbe, 0x1e, 0xd7, 0x2e, 0x83, 0x0f,
+-      0x83, 0xf2, 0x27, 0xf5, 0x01, 0xf9, 0x4a, 0xbd, 0x5f, 0xbe, 0x04, 0xdb,
+-      0xf2, 0x5c, 0xbd, 0x0b, 0x7b, 0x25, 0x01, 0x9e, 0x64, 0xc0, 0x1f, 0x4f,
+-      0xbe, 0x5c, 0x4f, 0xcb, 0x17, 0x41, 0xab, 0xe7, 0xf1, 0x1b, 0x2e, 0xa7,
+-      0x65, 0x4f, 0xb9, 0x5f, 0xf3, 0x88, 0xfc, 0x71, 0x31, 0x1f, 0x17, 0x6b,
+-      0x77, 0x9e, 0x29, 0x62, 0xff, 0x2d, 0xd4, 0xdd, 0xb7, 0xaa, 0x34, 0xb2,
+-      0x6d, 0xb6, 0x9c, 0x59, 0xb1, 0x2f, 0x45, 0xdf, 0x76, 0x9d, 0xa3, 0x13,
+-      0xe0, 0x43, 0x15, 0xfb, 0x74, 0x4c, 0xd1, 0x7e, 0xd5, 0xf6, 0x54, 0x03,
+-      0xdb, 0x63, 0xd6, 0x37, 0x5b, 0x90, 0xef, 0x48, 0xee, 0xc4, 0xb4, 0xec,
+-      0x3f, 0xe9, 0xcb, 0x6f, 0x7a, 0x3e, 0xe4, 0x98, 0xba, 0x78, 0x80, 0x3a,
+-      0x3e, 0x39, 0x11, 0xb6, 0x94, 0x9f, 0x1b, 0x60, 0x8d, 0xef, 0x75, 0x60,
+-      0xcf, 0xa6, 0xb3, 0xd6, 0x94, 0xa4, 0x4e, 0x4c, 0x49, 0xf7, 0x09, 0xc8,
+-      0x82, 0xc7, 0xbe, 0x96, 0x6d, 0xeb, 0x1d, 0xf2, 0xc0, 0x71, 0x9c, 0xc1,
+-      0xbc, 0xb8, 0xf6, 0x5b, 0x92, 0xc6, 0xf8, 0x87, 0xa4, 0x07, 0x6d, 0x5c,
+-      0xb4, 0xb9, 0xa6, 0xc6, 0x6e, 0xc5, 0xd8, 0xcd, 0x72, 0x24, 0xee, 0x40,
+-      0xd6, 0x68, 0xc3, 0xff, 0xaf, 0xe4, 0xaa, 0x4c, 0x7f, 0x24, 0xb9, 0x33,
+-      0x6f, 0x37, 0x4b, 0x0b, 0x9f, 0xa1, 0x1a, 0xe6, 0x59, 0xde, 0x8d, 0x94,
+-      0xe5, 0xae, 0x58, 0xc7, 0x7f, 0x22, 0xb9, 0xf3, 0x1c, 0xfb, 0x2d, 0x94,
+-      0x7f, 0x43, 0x72, 0xc7, 0x7f, 0x8a, 0xfc, 0x15, 0xa4, 0x6f, 0x23, 0x1d,
+-      0x93, 0xee, 0xe3, 0xf0, 0x91, 0xcf, 0x7f, 0x1b, 0x79, 0xf8, 0x74, 0xe7,
+-      0x8f, 0xa0, 0xde, 0x6e, 0xcc, 0xef, 0xde, 0x18, 0xb0, 0x06, 0x74, 0x5e,
+-      0xec, 0xba, 0x60, 0xfe, 0x2c, 0x67, 0x19, 0xdf, 0x1d, 0x81, 0x4e, 0xfb,
+-      0x1f, 0xd0, 0x69, 0xfa, 0x79, 0x81, 0x79, 0xea, 0x36, 0x3e, 0x4f, 0x81,
+-      0x26, 0x87, 0x90, 0xf7, 0xe5, 0x61, 0x8f, 0xf6, 0x66, 0xa7, 0x8c, 0xdb,
+-      0x45, 0xbf, 0x05, 0xb8, 0xa2, 0x15, 0xfb, 0x60, 0x6a, 0xc7, 0xc6, 0xfb,
+-      0xe0, 0x68, 0xef, 0x61, 0xd9, 0xb4, 0xdd, 0xac, 0xdf, 0xac, 0xd7, 0xb5,
+-      0x7f, 0xa8, 0xe8, 0xe0, 0x14, 0x3f, 0x29, 0x5c, 0x87, 0x9b, 0x78, 0xd2,
+-      0xea, 0xbd, 0xff, 0x21, 0xec, 0x03, 0xeb, 0x3c, 0xf3, 0xc1, 0x3e, 0xb0,
+-      0xce, 0x43, 0x37, 0xcc, 0xc3, 0x47, 0x9b, 0xef, 0x92, 0xe6, 0xe3, 0xab,
+-      0xfb, 0xa0, 0xe9, 0xf8, 0xcf, 0xdf, 0x07, 0xcd, 0xe7, 0x51, 0xef, 0x3c,
+-      0x69, 0x86, 0x3e, 0xce, 0x90, 0x66, 0x9d, 0x48, 0x1f, 0xc1, 0x5a, 0x39,
+-      0xf7, 0x66, 0xcc, 0x3d, 0xc0, 0x45, 0x1f, 0x82, 0xbc, 0x7f, 0x62, 0xfb,
+-      0x21, 0x5d, 0xfe, 0x9f, 0xfd, 0x91, 0xb8, 0x53, 0x91, 0x10, 0x69, 0x8a,
+-      0xba, 0x55, 0xd2, 0xf0, 0x79, 0xd0, 0xe6, 0xa0, 0x74, 0x93, 0x7e, 0xd5,
+-      0xbd, 0xc8, 0x17, 0xfd, 0x28, 0x7d, 0x74, 0x45, 0x4f, 0xe0, 0xa4, 0x01,
+-      0x96, 0xbf, 0x0a, 0x99, 0x21, 0xc6, 0x7c, 0x5d, 0xf6, 0xcf, 0xf8, 0x32,
+-      0xee, 0x71, 0xfd, 0x6f, 0x62, 0xfd, 0xd9, 0xed, 0x71, 0x59, 0x4e, 0xc6,
+-      0x41, 0x93, 0x05, 0xe8, 0xf6, 0x2b, 0x12, 0xd0, 0x81, 0x31, 0xe7, 0x3d,
+-      0xe2, 0x26, 0x86, 0xc5, 0x4d, 0x7f, 0x0f, 0x74, 0x18, 0x86, 0xec, 0xe7,
+-      0xeb, 0x94, 0x9d, 0x57, 0x64, 0x08, 0x32, 0xf1, 0x86, 0xe7, 0xa4, 0x81,
+-      0x85, 0xa0, 0x2f, 0x28, 0x17, 0x94, 0x89, 0x36, 0xa5, 0x93, 0xe6, 0x3d,
+-      0xe7, 0xa9, 0xaa, 0xdc, 0x2a, 0xf3, 0x0a, 0x9b, 0xe2, 0xdd, 0x71, 0x65,
+-      0x2f, 0xd2, 0x13, 0x56, 0x0f, 0x74, 0x74, 0x5a, 0xec, 0xde, 0x9b, 0x9b,
+-      0xcd, 0x3d, 0x85, 0xc2, 0x89, 0x90, 0x4c, 0xf5, 0x92, 0x57, 0xec, 0x17,
+-      0xf9, 0x6a, 0xd1, 0x8f, 0xb8, 0x6f, 0xf9, 0xa7, 0x3b, 0x93, 0xf2, 0xe9,
+-      0xde, 0x15, 0xb9, 0xac, 0x88, 0x04, 0xfb, 0x62, 0x48, 0xf1, 0xc3, 0xcc,
+-      0xdb, 0xac, 0xc5, 0xbc, 0xeb, 0x6f, 0x78, 0xc7, 0xb5, 0x50, 0xd6, 0x57,
+-      0xf6, 0x4e, 0xf2, 0x9d, 0x73, 0xfd, 0x5d, 0xd0, 0xcc, 0x79, 0xaa, 0x24,
+-      0xaf, 0x41, 0xf6, 0x40, 0xc3, 0xf3, 0x4c, 0x49, 0xc3, 0x29, 0xc8, 0xfd,
+-      0xab, 0xb2, 0xe7, 0x04, 0xf7, 0xcc, 0xab, 0x58, 0xab, 0xd2, 0x25, 0xd0,
+-      0x11, 0xec, 0xcf, 0x97, 0x69, 0x8f, 0xb1, 0x92, 0x5b, 0x13, 0x93, 0xf0,
+-      0xe1, 0x26, 0x6c, 0x5f, 0x96, 0xbc, 0xa2, 0x2c, 0x0d, 0xa2, 0x4d, 0xf5,
+-      0x11, 0xfc, 0xda, 0xf4, 0xda, 0x3e, 0x0b, 0xba, 0x3b, 0xc9, 0x8a, 0xf5,
+-      0x19, 0xd0, 0xfd, 0x61, 0x49, 0x1d, 0x5f, 0xd1, 0x35, 0x90, 0xbb, 0x40,
+-      0xd7, 0xa4, 0xce, 0xdb, 0x52, 0x2d, 0xbb, 0xf2, 0x71, 0xea, 0x90, 0x32,
+-      0xd7, 0x05, 0x1d, 0xc3, 0xf3, 0xdb, 0x32, 0xf4, 0x4c, 0x19, 0x3a, 0x05,
+-      0x3a, 0xe4, 0x4b, 0x28, 0xff, 0x22, 0xea, 0x3c, 0x0f, 0x9f, 0xe7, 0x39,
+-      0x60, 0xbf, 0x8b, 0xc0, 0x14, 0x17, 0xca, 0x59, 0xed, 0x1b, 0xaa, 0xf5,
+-      0xc2, 0x66, 0x29, 0x7f, 0x45, 0xaa, 0x15, 0xd2, 0xe3, 0x27, 0x8a, 0xb7,
+-      0x39, 0x6f, 0x2b, 0x71, 0x16, 0x66, 0x26, 0x52, 0xa9, 0x18, 0x9a, 0x50,
+-      0xf7, 0x31, 0xf6, 0x6f, 0x74, 0x65, 0xeb, 0x3a, 0x5d, 0x29, 0xf2, 0x62,
+-      0x2d, 0xc0, 0x93, 0xc4, 0xc7, 0xa5, 0x99, 0xe4, 0xca, 0x19, 0x59, 0x09,
+-      0x76, 0xf3, 0x32, 0xfc, 0x92, 0x58, 0xe6, 0x5b, 0x12, 0x3b, 0xe5, 0xfb,
+-      0xdf, 0x87, 0xdd, 0x2c, 0x82, 0x27, 0x56, 0x08, 0xe5, 0x8b, 0x7c, 0x47,
+-      0xb9, 0xa7, 0x6c, 0x87, 0x18, 0x2b, 0x97, 0x97, 0x51, 0x56, 0x55, 0x3e,
+-      0xd3, 0xb7, 0x31, 0x1f, 0x3d, 0x3f, 0x55, 0xc6, 0x7a, 0xcd, 0x92, 0x1f,
+-      0x4f, 0xcb, 0xe3, 0xe5, 0x6d, 0x76, 0x33, 0xda, 0x57, 0x16, 0xd9, 0xc6,
+-      0x19, 0xe4, 0x95, 0x9d, 0x97, 0x17, 0x59, 0xde, 0x25, 0x57, 0x66, 0x32,
+-      0x6a, 0x0e, 0xd5, 0xb9, 0x8c, 0x04, 0x31, 0x49, 0xea, 0x2b, 0xce, 0x15,
+-      0x79, 0xfa, 0x96, 0x65, 0xda, 0xd9, 0x88, 0x14, 0x13, 0xa4, 0x75, 0x42,
+-      0x2e, 0xcf, 0xc4, 0x37, 0x31, 0x86, 0x93, 0x73, 0xf9, 0x6c, 0x62, 0x07,
+-      0xf6, 0xfb, 0x88, 0x1d, 0x30, 0x5e, 0x10, 0x81, 0x2d, 0x53, 0x31, 0x04,
+-      0xa4, 0xc9, 0x06, 0x9f, 0x95, 0xef, 0x03, 0x6c, 0xb4, 0x8a, 0x1f, 0x89,
+-      0x27, 0xb9, 0x5e, 0xa7, 0xb8, 0x0c, 0xfd, 0xd1, 0x91, 0x79, 0x49, 0xee,
+-      0x99, 0x0f, 0xd6, 0x67, 0x9d, 0x11, 0xde, 0xd3, 0x90, 0x6b, 0x73, 0x8e,
+-      0x77, 0x15, 0x98, 0x22, 0x1f, 0xf7, 0xc0, 0xaf, 0x3f, 0x8b, 0x41, 0x7f,
+-      0x0d, 0x66, 0xad, 0x3d, 0x9b, 0x02, 0x7c, 0x16, 0x91, 0xa9, 0x19, 0x9e,
+-      0xa9, 0x41, 0xb7, 0x01, 0x43, 0xfe, 0xf3, 0x08, 0x9e, 0x6b, 0xcc, 0xc3,
+-      0x4f, 0x0b, 0x7c, 0x50, 0x3c, 0x07, 0xfd, 0x91, 0xe6, 0xd6, 0x3c, 0xd7,
+-      0x1e, 0x92, 0x7b, 0x80, 0x4e, 0x04, 0xfd, 0x77, 0xeb, 0xb1, 0xba, 0xcf,
+-      0xa4, 0x19, 0xc3, 0x93, 0x14, 0xf4, 0x45, 0x6e, 0x2e, 0x82, 0xb1, 0xba,
+-      0x34, 0x36, 0xe7, 0xbb, 0xf5, 0xd8, 0xd3, 0xf8, 0x78, 0x69, 0x79, 0xa2,
+-      0x6c, 0xb0, 0x5e, 0x1a, 0x36, 0x56, 0x22, 0x23, 0x7d, 0xbe, 0x7c, 0xdf,
+-      0x23, 0xbd, 0xfa, 0x91, 0xf7, 0xe4, 0x68, 0xfd, 0xdd, 0xce, 0xce, 0x1a,
+-      0xff, 0x5a, 0x31, 0x47, 0xfe, 0x30, 0x3f, 0xe0, 0x23, 0xce, 0xdd, 0x82,
+-      0x3d, 0x2f, 0x01, 0x77, 0x59, 0xe7, 0xba, 0xd4, 0x3b, 0x0b, 0xd8, 0xa0,
+-      0x3a, 0x03, 0xdd, 0x78, 0x8e, 0xe7, 0x89, 0xd0, 0x6d, 0xe7, 0xa2, 0x52,
+-      0x9a, 0xa5, 0x5c, 0x4a, 0x87, 0x05, 0x7e, 0xb1, 0x7e, 0x75, 0xa6, 0x0b,
+-      0x69, 0x2b, 0xd2, 0xa4, 0xea, 0xa7, 0x3a, 0xe3, 0xaa, 0xf6, 0xd5, 0x99,
+-      0xb4, 0x6a, 0x57, 0x9d, 0xe9, 0x47, 0xea, 0x49, 0xd3, 0x39, 0x38, 0x4e,
+-      0xe7, 0x7a, 0x65, 0xea, 0x34, 0xec, 0xcb, 0x80, 0xa5, 0xce, 0xe2, 0x27,
+-      0x60, 0x7f, 0x22, 0xf0, 0xb2, 0xae, 0xda, 0x83, 0xc0, 0x58, 0x3b, 0x81,
+-      0x41, 0x76, 0x8a, 0x7b, 0x8a, 0xeb, 0xa7, 0xee, 0xbd, 0xcc, 0x78, 0x52,
+-      0xe2, 0x41, 0xc9, 0xca, 0x81, 0xd9, 0x66, 0xec, 0xd7, 0x88, 0x5d, 0x92,
+-      0x1e, 0x7b, 0x18, 0xf9, 0x42, 0x85, 0x74, 0xbb, 0x4f, 0xf9, 0x6e, 0x39,
+-      0xef, 0x1c, 0x78, 0x92, 0xc1, 0x18, 0xef, 0xa7, 0x7d, 0x1f, 0xe4, 0xcf,
+-      0xd5, 0x7d, 0x64, 0x30, 0x9f, 0x46, 0x7a, 0xf0, 0x1c, 0x31, 0xfb, 0x73,
+-      0xce, 0x11, 0x29, 0xd7, 0xa4, 0xef, 0x7d, 0x72, 0xd9, 0xcd, 0xc8, 0xcb,
+-      0x6e, 0x5a, 0xae, 0xb8, 0x3b, 0xe4, 0xeb, 0xb0, 0xd3, 0x2f, 0xb9, 0x7d,
+-      0x9b, 0x88, 0x05, 0xaa, 0xea, 0x6c, 0xc6, 0xf0, 0xca, 0xd5, 0xf1, 0xc4,
+-      0x1f, 0xc8, 0xd2, 0x0c, 0xb1, 0xb3, 0xbf, 0x7b, 0xbf, 0x57, 0xa4, 0xdd,
+-      0xc2, 0x1c, 0x88, 0xd5, 0x8a, 0xb0, 0x7f, 0x87, 0x65, 0xd8, 0xa3, 0xdd,
+-      0x53, 0x36, 0x2a, 0x31, 0x1c, 0xec, 0x67, 0xaf, 0x00, 0xbd, 0x7a, 0x79,
+-      0x16, 0xfb, 0x49, 0x28, 0xff, 0x78, 0xae, 0x90, 0xef, 0xae, 0x3c, 0x59,
+-      0xe6, 0x3a, 0x4b, 0xd7, 0xb5, 0x48, 0x58, 0x46, 0x14, 0x5e, 0x68, 0x93,
+-      0x17, 0x17, 0x37, 0x8b, 0x05, 0x0b, 0x65, 0xdd, 0x12, 0x55, 0xb7, 0x18,
+-      0xe8, 0x7f, 0x4b, 0x3b, 0xef, 0x22, 0xbd, 0x05, 0xda, 0x30, 0x16, 0x80,
+-      0xb5, 0xb5, 0x73, 0x25, 0x26, 0xdf, 0x8f, 0xfd, 0xf5, 0x96, 0xda, 0x6b,
+-      0x79, 0x37, 0x8e, 0x67, 0xa6, 0xdc, 0x73, 0x8c, 0x3b, 0x85, 0x75, 0xfc,
+-      0xf7, 0xaf, 0xd4, 0xfb, 0x66, 0x77, 0x17, 0x70, 0x1d, 0xe5, 0x15, 0xe9,
+-      0x52, 0x30, 0x6e, 0x1e, 0x38, 0xae, 0xd0, 0xcf, 0x3b, 0x14, 0x4e, 0xba,
+-      0x88, 0xbd, 0x30, 0xa1, 0xea, 0xef, 0xc4, 0x7e, 0xda, 0xd4, 0x42, 0xfc,
+-      0xb0, 0x07, 0xb2, 0xf8, 0xd2, 0x0c, 0x9f, 0xf9, 0x9e, 0xfe, 0x15, 0xe3,
+-      0x6b, 0x17, 0x46, 0xa7, 0xdd, 0xdf, 0xd2, 0xfb, 0x47, 0x42, 0x77, 0xf5,
+-      0x01, 0x87, 0x1e, 0x6b, 0xc2, 0x5a, 0x9c, 0x64, 0x32, 0x64, 0x75, 0x5a,
+-      0xc0, 0xf1, 0xc3, 0xca, 0xe6, 0xf6, 0x61, 0xfe, 0x69, 0x39, 0x93, 0x6e,
+-      0x93, 0xaa, 0xed, 0xaa, 0x3b, 0x57, 0xcb, 0xf6, 0x76, 0x62, 0x7d, 0xfc,
+-      0x36, 0xa1, 0xac, 0x07, 0x69, 0x33, 0xd2, 0xdb, 0xa4, 0x74, 0xb2, 0xaf,
+-      0x25, 0xe8, 0x2f, 0xba, 0x2e, 0xff, 0x75, 0x3d, 0xce, 0x5f, 0x6a, 0x7f,
+-      0x8a, 0xe3, 0x44, 0xc5, 0xfd, 0x7c, 0xab, 0xf4, 0x1c, 0xb3, 0x81, 0x6d,
+-      0x13, 0xc0, 0xba, 0x5d, 0x92, 0x3e, 0x96, 0x94, 0x5b, 0x8e, 0x99, 0x38,
+-      0xd1, 0x97, 0x47, 0x53, 0x2a, 0x66, 0xf8, 0xa5, 0x51, 0xb7, 0xa2, 0xce,
+-      0x53, 0xf5, 0xdd, 0xb0, 0x65, 0x7d, 0x67, 0xec, 0x1b, 0xa3, 0x7d, 0x2a,
+-      0xfd, 0xf6, 0x68, 0x5a, 0xa5, 0xaf, 0x8c, 0xde, 0x52, 0x0b, 0xfc, 0xa3,
+-      0xd2, 0x42, 0x5a, 0x3e, 0x57, 0x26, 0xbe, 0x1c, 0x00, 0x76, 0xf4, 0xa0,
+-      0x67, 0xfa, 0xa1, 0x67, 0xd2, 0xd0, 0x33, 0x83, 0xd4, 0x33, 0xd0, 0xdb,
+-      0xaf, 0x40, 0x6f, 0x7b, 0xf2, 0x06, 0xe4, 0xf5, 0x82, 0xd7, 0x0c, 0x5c,
+-      0xe8, 0xfb, 0xc1, 0x5a, 0x9d, 0xa7, 0x96, 0xc1, 0xdf, 0xea, 0x59, 0x89,
+-      0xb5, 0x43, 0x07, 0x6d, 0x9f, 0x6f, 0x92, 0x85, 0xb8, 0xef, 0x9f, 0xf0,
+-      0x5c, 0xb9, 0x86, 0xfa, 0x39, 0x97, 0xfb, 0x78, 0xa2, 0x85, 0xfe, 0xd8,
+-      0xb5, 0x99, 0x1d, 0xd0, 0x49, 0x94, 0xf7, 0x98, 0x54, 0xc7, 0x13, 0xb2,
+-      0x08, 0xff, 0x6c, 0xb5, 0x4e, 0x1a, 0xcf, 0xdc, 0xff, 0xff, 0x12, 0x75,
+-      0xd3, 0xb0, 0x0f, 0xb6, 0x2c, 0xf5, 0x25, 0xe5, 0x4c, 0x9f, 0x33, 0x98,
+-      0xb4, 0xa8, 0xbb, 0x92, 0x52, 0x81, 0xaf, 0x5f, 0x2d, 0xb3, 0x3e, 0xeb,
+-      0x61, 0x7f, 0x96, 0x83, 0x76, 0xd3, 0x65, 0xa3, 0x27, 0x20, 0x9f, 0x73,
+-      0x8c, 0x03, 0x06, 0x36, 0xc0, 0xb2, 0x9a, 0x21, 0x07, 0x1e, 0xe8, 0x3f,
+-      0x8e, 0xf2, 0x01, 0xde, 0x25, 0x40, 0x19, 0xb1, 0x50, 0x49, 0xf1, 0x38,
+-      0xef, 0x8d, 0xa3, 0x8c, 0x6d, 0x9c, 0x44, 0x0a, 0xe5, 0x63, 0x92, 0x4a,
+-      0x14, 0xd4, 0xbd, 0xa6, 0x4e, 0x94, 0xb1, 0x8f, 0xb0, 0x8e, 0xc7, 0xcc,
+-      0xb6, 0x50, 0x8e, 0xc2, 0xae, 0x29, 0xdf, 0xa6, 0x62, 0x03, 0x59, 0xdb,
+-      0xc3, 0x7e, 0x60, 0x59, 0xca, 0x66, 0xbb, 0xbc, 0xe7, 0x29, 0x5d, 0x78,
+-      0xaf, 0x3e, 0xb7, 0xb8, 0xa7, 0xd6, 0x2a, 0xf9, 0x5a, 0xd3, 0x7b, 0xe8,
+-      0x7f, 0xb3, 0x27, 0x2f, 0x27, 0x6c, 0xe1, 0x19, 0x7b, 0xb0, 0xcf, 0x23,
+-      0x3b, 0xb8, 0x27, 0x40, 0x77, 0xd8, 0xdf, 0xe7, 0xb1, 0xde, 0xe7, 0x60,
+-      0x7f, 0x2f, 0xc2, 0xfe, 0x5e, 0x28, 0xaf, 0xea, 0x8f, 0xc0, 0xee, 0x52,
+-      0x07, 0x3c, 0x03, 0x9e, 0x8d, 0x01, 0xf7, 0xef, 0x85, 0x3f, 0x30, 0x02,
+-      0xec, 0x3f, 0x04, 0xfe, 0x65, 0xc0, 0xbb, 0x71, 0xde, 0x45, 0x01, 0x1f,
+-      0x07, 0xd5, 0x59, 0xe6, 0xac, 0x3a, 0xcf, 0xff, 0x81, 0xb2, 0xbd, 0x8f,
+-      0x97, 0x2d, 0xd8, 0x87, 0xa2, 0x7f, 0x9d, 0xeb, 0x00, 0xff, 0xad, 0xec,
+-      0xe7, 0xc1, 0x17, 0xa1, 0x57, 0x7e, 0x8c, 0x79, 0x3d, 0x37, 0x4b, 0x7b,
+-      0x8e, 0x3a, 0x01, 0xde, 0xf6, 0x18, 0xeb, 0xc2, 0x7e, 0x3e, 0x7a, 0x59,
+-      0x96, 0x81, 0x3b, 0xb2, 0x94, 0x63, 0xf8, 0x0f, 0xce, 0x85, 0x8a, 0xf4,
+-      0x52, 0x07, 0x02, 0x13, 0x0d, 0xca, 0xc0, 0xf1, 0x04, 0xb0, 0x1e, 0x90,
+-      0xbc, 0x3a, 0xaf, 0xc3, 0xf3, 0xf9, 0x2d, 0x62, 0x11, 0xef, 0x79, 0x3c,
+-      0x9b, 0xa1, 0xde, 0x30, 0x18, 0x69, 0x79, 0xb0, 0x43, 0xb2, 0xdb, 0x3b,
+-      0x94, 0xee, 0x70, 0xbc, 0x97, 0x31, 0xee, 0x1e, 0xb8, 0x20, 0x6f, 0x00,
+-      0x21, 0x58, 0x99, 0x43, 0xf2, 0xbf, 0x3c, 0xc6, 0xa8, 0x02, 0xdf, 0x0f,
+-      0x73, 0x89, 0x81, 0x66, 0x9b, 0xf6, 0xbb, 0x76, 0x6c, 0x4f, 0x9d, 0xfd,
+-      0xc7, 0x14, 0xc6, 0xca, 0x0b, 0xfb, 0x87, 0x9d, 0xc0, 0x98, 0xa9, 0xe3,
+-      0x94, 0xfd, 0x6d, 0xe0, 0xdb, 0x3f, 0x05, 0x06, 0x22, 0x55, 0x87, 0x36,
+-      0x07, 0xfb, 0x85, 0xf3, 0x5f, 0x26, 0x9e, 0x60, 0x4c, 0x3d, 0xf0, 0xcb,
+-      0x57, 0xe6, 0xb6, 0x13, 0xf6, 0xeb, 0xb6, 0xcd, 0x94, 0x81, 0x71, 0x0f,
+-      0x7e, 0xdf, 0xf1, 0xc0, 0x5e, 0x77, 0x9f, 0x47, 0xab, 0x13, 0xd2, 0xc9,
+-      0xd3, 0x4e, 0x4b, 0x6e, 0x91, 0x8f, 0x44, 0x82, 0x7e, 0xac, 0x79, 0x1b,
+-      0xb2, 0x4a, 0x3d, 0xd0, 0x09, 0x39, 0x67, 0x9e, 0x3a, 0x85, 0x3a, 0x81,
+-      0xb2, 0xe0, 0x4a, 0xa9, 0x0e, 0x9d, 0xd0, 0xd6, 0x25, 0x15, 0xd2, 0x6c,
+-      0x9e, 0x7a, 0xe2, 0x07, 0x32, 0xbd, 0x4e, 0x57, 0x0e, 0x89, 0xf1, 0x6b,
+-      0x5b, 0x25, 0x9a, 0x71, 0xed, 0x7b, 0xd5, 0x1a, 0x03, 0x7d, 0x79, 0x80,
+-      0xf8, 0x73, 0x36, 0xeb, 0x74, 0x88, 0xc6, 0x9e, 0x0a, 0x3f, 0xbd, 0x89,
+-      0xb5, 0xb2, 0x0f, 0x45, 0xa7, 0xc1, 0xa1, 0xc0, 0x17, 0x50, 0x31, 0x3f,
+-      0xe0, 0xe0, 0xc4, 0x8f, 0xa1, 0x6b, 0xf3, 0xc4, 0x25, 0xa0, 0x73, 0xf7,
+-      0x09, 0xca, 0xd1, 0x75, 0xea, 0x6c, 0xbc, 0x62, 0xa5, 0xa9, 0xaf, 0x65,
+-      0xf1, 0x38, 0x30, 0x97, 0xb5, 0x4b, 0x0a, 0x94, 0x57, 0x9e, 0x7d, 0x2f,
+-      0x5a, 0x32, 0x3d, 0xd7, 0x26, 0x3d, 0xf3, 0x8c, 0xaf, 0xee, 0x6e, 0x91,
+-      0x36, 0xc6, 0x58, 0x69, 0x83, 0x06, 0x24, 0x8f, 0xf2, 0xee, 0xf9, 0xb0,
+-      0x8a, 0x87, 0x55, 0x2c, 0xd2, 0xa8, 0x1f, 0xfa, 0xc0, 0x49, 0x2f, 0x5b,
+-      0xff, 0x25, 0x16, 0x60, 0x48, 0xc8, 0x52, 0x19, 0x32, 0x56, 0x86, 0x8c,
+-      0x95, 0x21, 0x63, 0x65, 0xc8, 0x18, 0xb0, 0xdf, 0x73, 0xd8, 0x7f, 0x17,
+-      0xcb, 0x83, 0xda, 0xae, 0xdf, 0xaf, 0xec, 0xfa, 0x91, 0x32, 0xcf, 0xf0,
+-      0xe9, 0x83, 0x26, 0x95, 0x0e, 0xb9, 0xa4, 0x7c, 0x51, 0xe3, 0xa3, 0xbe,
+-      0x22, 0xcf, 0xcc, 0xbe, 0x2a, 0x67, 0x66, 0x57, 0x71, 0xe0, 0x54, 0xd9,
+-      0x97, 0x97, 0x3d, 0xf8, 0x9f, 0x0b, 0xc4, 0x54, 0xd9, 0xf6, 0x66, 0x85,
+-      0xad, 0x0e, 0x4b, 0x41, 0xe1, 0x64, 0x65, 0x47, 0x80, 0xaf, 0x14, 0x2e,
+-      0xe4, 0xde, 0x94, 0x8e, 0xed, 0xaf, 0xc9, 0x45, 0xd8, 0xf1, 0xc5, 0xfa,
+-      0xeb, 0xf2, 0xbc, 0xc2, 0xe3, 0xa4, 0xc3, 0x07, 0xe4, 0x47, 0x76, 0x70,
+-      0x4e, 0x7c, 0x06, 0x58, 0x63, 0xb1, 0x8f, 0xba, 0x23, 0x02, 0x5b, 0xe0,
+-      0x14, 0xbb, 0xb1, 0xaf, 0x0f, 0x5a, 0x37, 0x00, 0xd3, 0xf0, 0xfd, 0x16,
+-      0x79, 0x71, 0xb6, 0xd8, 0x20, 0x13, 0xd4, 0x0f, 0xce, 0x51, 0xb1, 0x68,
+-      0xa7, 0x68, 0x37, 0xb9, 0x5e, 0xda, 0xa9, 0x3f, 0xd8, 0xcc, 0xb3, 0xd4,
+-      0xea, 0xc9, 0x73, 0x2d, 0x8c, 0x37, 0xc6, 0x5d, 0xd2, 0xf4, 0x35, 0x39,
+-      0x58, 0x63, 0xd9, 0xab, 0xe0, 0x0f, 0xd3, 0xef, 0xf9, 0xf7, 0xc4, 0x39,
+-      0x1e, 0xfb, 0x05, 0x6e, 0xea, 0xc4, 0x5a, 0xcb, 0x7f, 0xa9, 0x63, 0x5e,
+-      0xfd, 0x0a, 0x47, 0xbf, 0x13, 0x2f, 0x9b, 0x7b, 0x0d, 0xaf, 0xa9, 0x78,
+-      0xe0, 0x06, 0x71, 0xe2, 0xa7, 0xb0, 0xaf, 0x8a, 0x57, 0x85, 0x31, 0x4b,
+-      0xc6, 0x73, 0x19, 0x2b, 0x6e, 0xd4, 0x18, 0xea, 0xbc, 0x54, 0xee, 0x86,
+-      0x7e, 0xb9, 0x07, 0xfa, 0xe5, 0xde, 0x77, 0xdc, 0xaf, 0x35, 0x71, 0xfb,
+-      0x9e, 0x62, 0xd8, 0xea, 0x92, 0xb1, 0x5a, 0x63, 0x5b, 0xc6, 0x71, 0x37,
+-      0x8a, 0xdb, 0x32, 0xa6, 0x9b, 0x5e, 0x17, 0x0b, 0xa4, 0x6c, 0xf8, 0xf2,
+-      0x92, 0xc7, 0xb8, 0x9b, 0xb9, 0x9b, 0xbd, 0x11, 0xfe, 0xfa, 0xc3, 0xcd,
+-      0x26, 0xe6, 0x1c, 0xc9, 0x5c, 0x15, 0xde, 0xd1, 0x2e, 0xcd, 0x10, 0x0f,
+-      0xa8, 0xb3, 0x40, 0x15, 0xbb, 0xce, 0x07, 0xf1, 0x03, 0x94, 0xc3, 0xea,
+-      0xc2, 0xdf, 0x61, 0xec, 0xda, 0xde, 0xe1, 0xd8, 0x63, 0xe1, 0xe0, 0xae,
+-      0x1f, 0xf7, 0x72, 0xa0, 0xcb, 0x20, 0x8b, 0xf5, 0xd5, 0x3b, 0x74, 0x43,
+-      0x4a, 0x5f, 0x5c, 0xc5, 0x1e, 0x20, 0xbf, 0xe0, 0x2f, 0x60, 0x9f, 0x4c,
+-      0x41, 0x3f, 0x15, 0x54, 0x7f, 0x31, 0xca, 0x45, 0x36, 0x17, 0xb6, 0x24,
+-      0x7a, 0x8a, 0xbe, 0x50, 0x10, 0x6b, 0xc9, 0x87, 0x1d, 0xa5, 0xbf, 0x31,
+-      0x77, 0xe0, 0x33, 0xee, 0xcf, 0xe4, 0x44, 0x73, 0xa6, 0x09, 0x76, 0x15,
+-      0xfc, 0xab, 0x33, 0x26, 0x80, 0xbd, 0xbb, 0xf4, 0x5d, 0x39, 0x30, 0x77,
+-      0x69, 0x73, 0x20, 0xff, 0x8c, 0x23, 0x73, 0x7d, 0x66, 0x0e, 0x6b, 0xfb,
+-      0xb6, 0x4e, 0x49, 0xac, 0x05, 0x36, 0xed, 0xa3, 0xa7, 0x88, 0x07, 0x9a,
+-      0x65, 0x39, 0xce, 0x7e, 0x83, 0x3d, 0x33, 0x5d, 0x66, 0xdf, 0xdf, 0x95,
+-      0xe1, 0xb9, 0x74, 0x2b, 0xf5, 0xc8, 0x12, 0xf4, 0xc0, 0x65, 0x9b, 0x36,
+-      0x74, 0x1c, 0x36, 0xae, 0x53, 0xde, 0x9c, 0xa3, 0x7d, 0x4c, 0xd9, 0x67,
+-      0x64, 0x5b, 0xe2, 0x0c, 0xe6, 0xf4, 0x84, 0x17, 0xa1, 0x8f, 0xe6, 0x0f,
+-      0xa1, 0xec, 0xeb, 0x92, 0xb2, 0xbb, 0x43, 0x7c, 0xde, 0x66, 0x3f, 0x29,
+-      0xbc, 0x6f, 0x90, 0xb2, 0x6f, 0x0d, 0x51, 0x8e, 0xe0, 0x73, 0x2f, 0xad,
+-      0xce, 0xf3, 0x7b, 0x73, 0xca, 0x4f, 0x52, 0x7a, 0x66, 0xc9, 0xe3, 0x78,
+-      0x97, 0xb4, 0x6e, 0xbb, 0x15, 0xfa, 0x24, 0xa6, 0xcf, 0xc2, 0xd0, 0x86,
+-      0xd8, 0xc6, 0x8b, 0xe8, 0xfc, 0x67, 0x25, 0x77, 0x3a, 0x0e, 0x7d, 0xc6,
+-      0xbe, 0x8c, 0xef, 0x40, 0x1b, 0x69, 0xf0, 0x36, 0xed, 0xdd, 0x2e, 0xd8,
+-      0xbd, 0x9b, 0xd4, 0x7c, 0x46, 0xbc, 0x7e, 0x99, 0x3a, 0xc9, 0xb1, 0xfb,
+-      0xa0, 0xcb, 0x13, 0x4a, 0x6e, 0x4b, 0xe5, 0xcb, 0x89, 0x18, 0x74, 0x72,
+-      0x6c, 0x3b, 0xe9, 0xf9, 0x61, 0xb9, 0xd3, 0x1d, 0x97, 0xbb, 0x20, 0x3b,
+-      0x43, 0xae, 0x27, 0xc3, 0xe0, 0xc5, 0x1e, 0x17, 0x76, 0x47, 0x61, 0xe8,
+-      0x66, 0xf8, 0x5d, 0x1c, 0x9b, 0xf7, 0xc4, 0xd9, 0x36, 0xc0, 0x8f, 0x7f,
+-      0x54, 0x0f, 0x68, 0x94, 0x9b, 0xfb, 0x88, 0xa2, 0xcd, 0x88, 0xb7, 0x53,
+-      0xdb, 0xd9, 0x36, 0xc9, 0xab, 0x7a, 0x3b, 0x95, 0x3d, 0x2e, 0x2d, 0xde,
+-      0x87, 0x14, 0xb6, 0x79, 0x11, 0xfa, 0x06, 0x98, 0xbb, 0x54, 0xdb, 0x81,
+-      0x3c, 0x6c, 0xe8, 0x62, 0x06, 0xe9, 0x87, 0x91, 0xb2, 0x6e, 0xa8, 0x35,
+-      0x88, 0xe5, 0x1a, 0x3c, 0xba, 0x7a, 0xbf, 0xf0, 0xa3, 0x0a, 0x97, 0x5e,
+-      0x55, 0xf7, 0xcb, 0x2c, 0x60, 0x9d, 0x1c, 0xf4, 0x4a, 0x2b, 0x30, 0xd0,
+-      0xcc, 0x29, 0x27, 0x3d, 0x1c, 0xda, 0x2d, 0xbf, 0x06, 0x5f, 0xbe, 0xea,
+-      0x91, 0x97, 0x3b, 0xe4, 0xc1, 0x3b, 0x28, 0x23, 0xbb, 0x65, 0xff, 0x1d,
+-      0x21, 0xd9, 0xdf, 0xef, 0x64, 0x39, 0xef, 0x5b, 0x6e, 0x33, 0xfe, 0x74,
+-      0xcf, 0x48, 0x2a, 0x34, 0x20, 0x4f, 0x42, 0xc6, 0x8a, 0x90, 0xaf, 0xe1,
+-      0x3a, 0x69, 0x4e, 0x7d, 0x4f, 0x3d, 0x9f, 0x06, 0x56, 0x36, 0xd8, 0xcf,
+-      0x95, 0x99, 0x7a, 0x93, 0x24, 0xaf, 0x67, 0x3c, 0x39, 0x19, 0x9c, 0x71,
+-      0x5c, 0x4f, 0x99, 0x80, 0x0f, 0x72, 0x7d, 0xb0, 0x3f, 0xd5, 0xbd, 0x2e,
+-      0xf5, 0x1c, 0xa7, 0xff, 0xeb, 0x13, 0xe7, 0x15, 0x14, 0x5f, 0x68, 0x23,
+-      0x98, 0xfe, 0xbb, 0xd6, 0x15, 0x7c, 0xd7, 0x46, 0xff, 0x61, 0x67, 0xeb,
+-      0xea, 0xbd, 0xf4, 0xf5, 0xb2, 0x68, 0xe2, 0x6e, 0x15, 0xac, 0x99, 0x36,
+-      0xdd, 0xb1, 0xa9, 0x0b, 0xdb, 0xdd, 0xfb, 0xe5, 0x4f, 0x60, 0xdf, 0xbf,
+-      0xb2, 0x62, 0xdf, 0xf7, 0x81, 0x1e, 0xeb, 0x31, 0x80, 0x6b, 0xdf, 0x8d,
+-      0xb5, 0x8c, 0x80, 0x9f, 0x77, 0xe1, 0x77, 0x67, 0x79, 0x4d, 0x1c, 0x6f,
+-      0xb6, 0x08, 0x3c, 0xd9, 0xe4, 0xb2, 0xbf, 0x35, 0xf1, 0xbc, 0x62, 0x41,
+-      0x56, 0x62, 0x85, 0x83, 0xd7, 0x84, 0x76, 0xef, 0x2d, 0x89, 0xf6, 0xba,
+-      0x6f, 0x75, 0x87, 0xdc, 0x17, 0xac, 0x10, 0xcf, 0x95, 0x3d, 0x39, 0x5b,
+-      0x27, 0x0e, 0xbb, 0x22, 0xd6, 0x79, 0x62, 0xb0, 0x6f, 0xa8, 0x18, 0x54,
+-      0xb5, 0xfc, 0x6d, 0xa4, 0xa8, 0x0f, 0xfd, 0x18, 0x0e, 0xe2, 0x14, 0x0a,
+-      0xab, 0x50, 0xcf, 0xde, 0x05, 0x3e, 0x4c, 0xe1, 0xd7, 0xbd, 0xfd, 0x56,
+-      0xec, 0x5f, 0xca, 0x29, 0x63, 0x5f, 0xbd, 0xf6, 0xf6, 0x10, 0xdf, 0x6d,
+-      0x14, 0x07, 0xfb, 0x8e, 0x44, 0x4e, 0xc0, 0xd6, 0x59, 0xd4, 0x0f, 0x5c,
+-      0x07, 0xed, 0xa4, 0x2d, 0x0b, 0x27, 0xb9, 0xd7, 0x37, 0xaa, 0x6f, 0xea,
+-      0x9a, 0xb5, 0x28, 0xbb, 0x91, 0x2d, 0x30, 0xc6, 0x59, 0x26, 0x0f, 0x3c,
+-      0xf0, 0xc0, 0x97, 0x53, 0x5e, 0x3b, 0xf4, 0x76, 0x5c, 0xc2, 0xa7, 0x7c,
+-      0x19, 0x52, 0xd8, 0x75, 0x1b, 0x30, 0xd7, 0x16, 0x8d, 0x1b, 0xe2, 0x12,
+-      0x39, 0xd5, 0x25, 0xcd, 0xc0, 0xd5, 0x4d, 0xc7, 0x68, 0x23, 0x53, 0xc9,
+-      0x21, 0x08, 0x41, 0x44, 0xdd, 0x55, 0x74, 0x06, 0xdf, 0x94, 0x6d, 0xc9,
+-      0x37, 0x85, 0x78, 0xe9, 0x86, 0x2d, 0xf0, 0x09, 0xbc, 0x2b, 0x1b, 0xd4,
+-      0x2f, 0xad, 0xd6, 0x87, 0x1c, 0x31, 0xb6, 0xc6, 0x36, 0x8c, 0xb5, 0xa5,
+-      0x06, 0xdf, 0x60, 0x8c, 0x0d, 0xbe, 0x66, 0xd3, 0xb9, 0x60, 0x0e, 0xd6,
+-      0x52, 0x87, 0x54, 0x4f, 0x73, 0x8f, 0x32, 0xce, 0x62, 0x07, 0x7e, 0x6a,
+-      0x99, 0xfe, 0x2a, 0xdf, 0x27, 0xf5, 0xfb, 0x6e, 0xfd, 0x9e, 0xfe, 0x68,
+-      0xd1, 0x6f, 0x02, 0x4d, 0xf7, 0x40, 0x7f, 0xde, 0xb7, 0xc3, 0x55, 0xb8,
+-      0xe1, 0xbe, 0x15, 0x9e, 0xed, 0x15, 0xeb, 0x38, 0xfc, 0xd4, 0xf2, 0x61,
+-      0x71, 0xb7, 0x2f, 0xa7, 0x23, 0x32, 0x06, 0x5e, 0x30, 0x9f, 0xe5, 0x7c,
+-      0xd2, 0x47, 0xe4, 0xa0, 0xe2, 0x4d, 0xf5, 0xa4, 0x73, 0x34, 0x19, 0x9a,
+-      0x12, 0xab, 0xca, 0xe7, 0x47, 0x90, 0x1e, 0x01, 0xde, 0x09, 0x62, 0x97,
+-      0x56, 0x75, 0x2d, 0x2d, 0x81, 0x31, 0xec, 0x3d, 0x6b, 0xe2, 0x58, 0xab,
+-      0x31, 0x2e, 0xbe, 0x1f, 0x52, 0xef, 0xd3, 0x6b, 0xe2, 0x5c, 0x79, 0x8b,
+-      0x58, 0xc6, 0xbc, 0x27, 0x2f, 0xc8, 0x2f, 0xd8, 0xe2, 0x93, 0x26, 0xe6,
+-      0xd5, 0xa6, 0xf9, 0x42, 0xfe, 0xcc, 0xc8, 0x45, 0xdb, 0x19, 0xa1, 0xfc,
+-      0xfd, 0xea, 0x8e, 0x1b, 0x65, 0xa2, 0x93, 0xf1, 0xb6, 0xc6, 0x39, 0xac,
+-      0x8f, 0xa3, 0x35, 0x8e, 0xbf, 0x3e, 0xfe, 0xc6, 0xb1, 0x83, 0x18, 0x5b,
+-      0x6e, 0x4d, 0x8c, 0xad, 0x71, 0x3c, 0x8e, 0xb5, 0x05, 0xfe, 0x53, 0xd1,
+-      0x8f, 0xbb, 0xe4, 0x51, 0x4f, 0x72, 0x8e, 0xf9, 0x2f, 0x58, 0xe0, 0x63,
+-      0x1c, 0x76, 0x84, 0xbc, 0x34, 0x67, 0xcf, 0xe4, 0x69, 0x2a, 0x79, 0x24,
+-      0xe0, 0xe7, 0x60, 0xc0, 0xf7, 0x80, 0xff, 0x57, 0x56, 0xf8, 0x48, 0xfb,
+-      0x40, 0x3e, 0x76, 0x8a, 0x40, 0xcf, 0x5a, 0xc7, 0xc8, 0x43, 0xa6, 0xe4,
+-      0x21, 0xdf, 0x91, 0x87, 0xdd, 0xfa, 0x1d, 0xf9, 0x07, 0x9c, 0xf6, 0x79,
+-      0x60, 0x0c, 0x2f, 0xa7, 0xbe, 0xb1, 0xe9, 0xee, 0x35, 0x7b, 0x31, 0x2d,
+-      0xcf, 0x2f, 0xb4, 0x88, 0x9d, 0x09, 0xd6, 0x35, 0xbe, 0x26, 0xde, 0xce,
+-      0xf3, 0xab, 0x7e, 0x62, 0x4f, 0xb3, 0xae, 0x04, 0xd7, 0x75, 0x50, 0x5e,
+-      0x93, 0xc2, 0x4c, 0x04, 0x3e, 0x60, 0x1a, 0x38, 0xa7, 0x1f, 0xfa, 0x96,
+-      0xf1, 0x51, 0x94, 0xd5, 0x88, 0x57, 0x68, 0xeb, 0xd2, 0xd8, 0x2b, 0xd4,
+-      0xc1, 0xc4, 0x23, 0xaf, 0x4a, 0xbe, 0x62, 0x74, 0x0c, 0xfa, 0xb7, 0x4c,
+-      0xff, 0xa4, 0x73, 0xf6, 0x96, 0xeb, 0x64, 0x39, 0x79, 0x9d, 0x38, 0xc9,
+-      0x45, 0x59, 0xe5, 0xeb, 0xf8, 0xc6, 0x74, 0xf7, 0xee, 0x0b, 0xaf, 0xca,
+-      0xc6, 0xf8, 0x06, 0xbc, 0x9f, 0x14, 0xf3, 0xde, 0xf0, 0x7e, 0x43, 0x3e,
+-      0x14, 0x5f, 0x11, 0xf2, 0x82, 0x34, 0x20, 0x1e, 0x8e, 0xca, 0xef, 0xc6,
+-      0xb9, 0x1f, 0x8b, 0xea, 0x7c, 0x33, 0x65, 0xf5, 0x2a, 0x9d, 0x31, 0xe4,
+-      0x05, 0xf2, 0x5a, 0xc4, 0x38, 0xb1, 0x9e, 0xdf, 0xf3, 0x87, 0xe2, 0xf0,
+-      0x73, 0x7b, 0xa8, 0x5f, 0xcc, 0x9e, 0x6e, 0x51, 0x7b, 0xfa, 0x09, 0x2f,
+-      0x24, 0x25, 0x37, 0x24, 0x53, 0xee, 0x61, 0x85, 0xf1, 0x7f, 0x03, 0x7d,
+-      0x3d, 0xa8, 0xfb, 0x9a, 0x92, 0x5e, 0xad, 0x7f, 0x0e, 0x41, 0xce, 0x7d,
+-      0xb9, 0xd7, 0xdb, 0x21, 0xbf, 0xda, 0xce, 0x3d, 0x60, 0xd6, 0x7f, 0x58,
+-      0x7a, 0x76, 0x2c, 0x27, 0xe1, 0x19, 0xdc, 0x12, 0x5d, 0xa1, 0x01, 0xf7,
+-      0x99, 0x91, 0xef, 0x80, 0x0e, 0xc1, 0xfa, 0xd7, 0xac, 0x55, 0xaf, 0x93,
+-      0x6b, 0x66, 0x3d, 0xae, 0x35, 0xc0, 0xf2, 0xab, 0x6b, 0x35, 0xf5, 0x5b,
+-      0x21, 0x4b, 0x4e, 0x52, 0x42, 0x8d, 0xb4, 0x59, 0xd1, 0x51, 0x23, 0x8c,
+-      0x91, 0x2c, 0xdb, 0x4e, 0x3a, 0x19, 0x32, 0xb1, 0xe8, 0x00, 0xeb, 0x76,
+-      0x03, 0x87, 0xbb, 0xbd, 0xbd, 0xe9, 0x82, 0x8a, 0x91, 0x5a, 0x6a, 0x5d,
+-      0x53, 0xc0, 0x64, 0x0b, 0xde, 0x2b, 0xfe, 0xa7, 0x81, 0x59, 0x27, 0xe4,
+-      0x61, 0x09, 0xaf, 0x89, 0xe5, 0x22, 0x7f, 0x9e, 0xf1, 0x5c, 0x27, 0x99,
+-      0x05, 0x8f, 0x7f, 0x13, 0x3e, 0x7c, 0x15, 0x7a, 0xff, 0xe3, 0xb4, 0x0d,
+-      0x65, 0xd8, 0x0b, 0xe0, 0x92, 0xaf, 0xbc, 0x27, 0x86, 0x9f, 0x68, 0x88,
+-      0xe5, 0x06, 0xf8, 0xf4, 0xa2, 0xc2, 0xa4, 0xc4, 0xed, 0x47, 0x43, 0x77,
+-      0xf7, 0x85, 0xe1, 0x67, 0x14, 0xfd, 0x98, 0x4b, 0x1c, 0x77, 0x58, 0xee,
+-      0x04, 0x7f, 0xce, 0x2e, 0x14, 0x43, 0x7b, 0xca, 0x46, 0x56, 0xe1, 0x57,
+-      0xd6, 0x9d, 0xf4, 0x65, 0xd0, 0xe3, 0x19, 0x8d, 0xf9, 0x78, 0x5e, 0x53,
+-      0xd5, 0x3e, 0x0b, 0x63, 0x43, 0xa5, 0xfa, 0x61, 0x99, 0xf6, 0x18, 0xdb,
+-      0xe9, 0x91, 0x52, 0x3c, 0x7b, 0x63, 0xf3, 0x0a, 0x8d, 0x1c, 0x1b, 0x3e,
+-      0x5f, 0x9a, 0xfa, 0xbb, 0xaa, 0xcf, 0x3b, 0x9e, 0x51, 0xf2, 0x65, 0xe2,
+-      0xc2, 0xf4, 0x8f, 0x78, 0x5e, 0xd5, 0x63, 0x8f, 0xf0, 0xb9, 0x42, 0x19,
+-      0x50, 0x3e, 0x13, 0x68, 0xf9, 0x90, 0x64, 0xc7, 0x92, 0x0a, 0xb7, 0x3c,
+-      0x5e, 0xe6, 0x7e, 0x21, 0xfe, 0x7f, 0x0d, 0xd8, 0x3f, 0x02, 0x9e, 0xd1,
+-      0x0f, 0xe0, 0xd8, 0xdc, 0x17, 0x28, 0xab, 0xd9, 0xef, 0xb2, 0x2f, 0x5e,
+-      0x6b, 0x23, 0xc6, 0xb8, 0x54, 0x16, 0x45, 0xbf, 0x65, 0x31, 0xb1, 0x73,
+-      0x85, 0x05, 0x8b, 0xb9, 0x70, 0x48, 0x52, 0x27, 0xfe, 0x35, 0x64, 0xe8,
+-      0xd7, 0xe1, 0x23, 0xa9, 0x7a, 0xea, 0xfc, 0x6a, 0x08, 0x98, 0xcb, 0x72,
+-      0x6f, 0x90, 0x92, 0x1d, 0x95, 0x92, 0xba, 0xa3, 0xc9, 0xf3, 0xdc, 0xb0,
+-      0x8a, 0xed, 0x94, 0x6c, 0x62, 0xfe, 0xff, 0xde, 0x16, 0xd8, 0xfa, 0x0e,
+-      0xe4, 0xd9, 0x8e, 0x79, 0x96, 0x4f, 0x49, 0xf4, 0xc4, 0x21, 0x69, 0x3a,
+-      0xf1, 0xb0, 0x34, 0x1f, 0x27, 0xc6, 0x63, 0xec, 0xde, 0xda, 0xd5, 0x2c,
+-      0xc4, 0xdc, 0x43, 0x18, 0xfb, 0xb0, 0x7c, 0xdf, 0x33, 0x73, 0x5a, 0xc4,
+-      0x1c, 0x59, 0xc7, 0xe4, 0x0d, 0x1e, 0xdf, 0x85, 0xf9, 0x70, 0xfd, 0x49,
+-      0x8d, 0xfb, 0x76, 0x35, 0xf8, 0xae, 0x4d, 0xda, 0x77, 0x65, 0xbb, 0x4f,
+-      0x61, 0xad, 0x27, 0x25, 0xea, 0x9a, 0xf6, 0xbb, 0x51, 0x2f, 0xd1, 0x70,
+-      0x07, 0x82, 0x75, 0xf4, 0x9d, 0x80, 0x36, 0xe2, 0x1e, 0x9e, 0xb7, 0xb3,
+-      0x2c, 0x38, 0xf3, 0xb7, 0xaa, 0xbb, 0xc2, 0x6b, 0xc7, 0xdf, 0xd9, 0x50,
+-      0xd7, 0x94, 0x99, 0x36, 0xd1, 0xc0, 0xe7, 0x1f, 0x88, 0x36, 0xb4, 0x83,
+-      0x71, 0x53, 0x69, 0xe0, 0x7b, 0x04, 0x7e, 0x10, 0xd7, 0x90, 0x6e, 0xc0,
+-      0x39, 0x6b, 0xbf, 0x45, 0xcc, 0xa3, 0xbc, 0x30, 0x67, 0xee, 0x91, 0x59,
+-      0x58, 0x8b, 0x53, 0xa4, 0xff, 0x62, 0xf3, 0x4e, 0xee, 0x5c, 0x11, 0xf3,
+-      0xbe, 0x49, 0xdd, 0x25, 0xe2, 0xdd, 0x0d, 0xd4, 0x4b, 0x06, 0xf8, 0x93,
+-      0xf9, 0x04, 0x78, 0x7e, 0x5b, 0x97, 0x95, 0xf9, 0xf3, 0x1b, 0x73, 0x03,
+-      0xc4, 0x37, 0x5b, 0x79, 0x0e, 0x09, 0xdc, 0x4c, 0x39, 0xfb, 0x2e, 0xe4,
+-      0xac, 0x59, 0x9d, 0xfb, 0x94, 0xca, 0xf4, 0xe7, 0x0a, 0x90, 0x1f, 0xde,
+-      0x87, 0xa3, 0xdf, 0x57, 0xd0, 0xf1, 0x58, 0xce, 0x93, 0x98, 0xde, 0xf8,
+-      0x07, 0xec, 0x73, 0xfd, 0x19, 0x6c, 0xe3, 0xfd, 0x12, 0xca, 0x5b, 0x42,
+-      0xcd, 0x79, 0x78, 0x9d, 0xbf, 0x72, 0x04, 0xba, 0x60, 0x01, 0xf2, 0x3c,
+-      0x09, 0x1d, 0x38, 0x14, 0xe6, 0xfe, 0x6c, 0xd1, 0xbe, 0xac, 0x4b, 0xbf,
+-      0x3d, 0x34, 0x86, 0x3e, 0xac, 0xe3, 0xaf, 0xcb, 0x14, 0xf4, 0xff, 0x74,
+-      0x3d, 0xa5, 0xbe, 0x17, 0xc9, 0x26, 0x78, 0x07, 0x8c, 0xe5, 0x63, 0x18,
+-      0xff, 0x75, 0xe0, 0xe1, 0xcd, 0xa0, 0xa7, 0xa5, 0x79, 0xf5, 0x2b, 0x3a,
+-      0x16, 0x15, 0x63, 0x2c, 0x1e, 0x7a, 0xb3, 0x14, 0x60, 0xcd, 0xf8, 0x34,
+-      0xd2, 0xcd, 0x2d, 0x81, 0xbc, 0x4e, 0x6e, 0xd5, 0x77, 0x2f, 0x50, 0xfe,
+-      0x98, 0x8a, 0x41, 0x06, 0x6b, 0x72, 0xb4, 0xaf, 0x12, 0x85, 0xcc, 0x71,
+-      0x5d, 0xf7, 0xa2, 0x1e, 0x65, 0xad, 0x4f, 0x9f, 0xcd, 0xb6, 0x28, 0xfd,
+-      0x98, 0x87, 0x2c, 0x15, 0x94, 0x1f, 0x01, 0x7c, 0xef, 0xb1, 0xdd, 0xaf,
+-      0x6f, 0xe5, 0xd9, 0x67, 0x93, 0xab, 0x7c, 0x8b, 0xce, 0xb0, 0x98, 0xb2,
+-      0x8f, 0xa0, 0x8c, 0x72, 0x76, 0x03, 0x78, 0xc3, 0xb2, 0x1c, 0xf2, 0x1c,
+-      0xeb, 0x46, 0x3d, 0x0e, 0xc7, 0xb8, 0xb4, 0x79, 0xed, 0x9c, 0xb8, 0x96,
+-      0xce, 0x75, 0x77, 0xe7, 0x59, 0x76, 0x83, 0x2e, 0x8b, 0xe8, 0xf5, 0xfd,
+-      0xa9, 0xfe, 0xb6, 0xc1, 0x39, 0x9a, 0x5d, 0xc1, 0xc6, 0x9c, 0x5f, 0x4c,
+-      0xb5, 0xcb, 0xda, 0x81, 0xec, 0x1c, 0x01, 0x3f, 0x22, 0x99, 0xaf, 0xf1,
+-      0x4c, 0x19, 0xf4, 0x35, 0x7b, 0x22, 0xa1, 0xfc, 0xce, 0xa4, 0x15, 0xdc,
+-      0x5d, 0xba, 0x58, 0x6e, 0xf4, 0x19, 0xcc, 0xfd, 0x6f, 0x57, 0xc6, 0x56,
+-      0x78, 0x45, 0xbe, 0x91, 0x5f, 0xef, 0xc6, 0x2b, 0xf2, 0x91, 0xfc, 0x2a,
+-      0x48, 0x69, 0x96, 0x7c, 0xa2, 0xbc, 0x8c, 0x29, 0x79, 0x29, 0x55, 0x0c,
+-      0x4e, 0xa6, 0x2e, 0xe1, 0x37, 0x0f, 0x1b, 0x9d, 0xd7, 0x9b, 0xbb, 0x61,
+-      0xbf, 0x44, 0xfa, 0x85, 0x86, 0xe1, 0x1e, 0x2d, 0xcc, 0x2a, 0x9d, 0x02,
+-      0xbb, 0x98, 0x50, 0xba, 0xa2, 0x30, 0xce, 0xfc, 0xd2, 0x56, 0x7e, 0x9b,
+-      0x8b, 0x79, 0xa0, 0xbc, 0x53, 0xf3, 0xf5, 0x06, 0x75, 0xbf, 0x89, 0x7b,
+-      0xb0, 0x54, 0xa9, 0xab, 0xf7, 0x67, 0xe7, 0x9a, 0x54, 0xfd, 0xb3, 0x73,
+-      0xeb, 0xef, 0x28, 0xb1, 0xec, 0x66, 0xc6, 0x55, 0x64, 0x71, 0xa6, 0x49,
+-      0x96, 0xe6, 0xfe, 0x90, 0x7e, 0x22, 0x8c, 0xc1, 0xca, 0xf7, 0x1d, 0xfa,
+-      0x5b, 0x2c, 0x5f, 0x86, 0x21, 0x37, 0x0b, 0x83, 0xd3, 0x52, 0x1d, 0xa4,
+-      0x1f, 0xa4, 0xee, 0x0e, 0x62, 0xbd, 0x4d, 0xc0, 0xc0, 0xc0, 0x85, 0x2e,
+-      0xe3, 0xcf, 0x5b, 0xb4, 0x3e, 0x79, 0xb0, 0x75, 0x25, 0x2e, 0x1d, 0x2f,
+-      0xfa, 0x55, 0xd7, 0x7c, 0x33, 0xc3, 0x3e, 0xf9, 0xdd, 0x0c, 0x79, 0x66,
+-      0xa1, 0x3d, 0xef, 0x64, 0x76, 0x33, 0xae, 0xad, 0xf9, 0x1c, 0x46, 0x7d,
+-      0xa6, 0xbf, 0xa7, 0xf3, 0x73, 0x3a, 0xfd, 0xac, 0xec, 0x3f, 0xf9, 0x19,
+-      0xcc, 0x7b, 0x53, 0x70, 0xef, 0x4a, 0x1a, 0xbf, 0x9b, 0x88, 0xe8, 0x6f,
+-      0x34, 0x3e, 0x8b, 0x32, 0xc6, 0xe2, 0x3e, 0xab, 0xd6, 0xc4, 0xbb, 0x7d,
+-      0x45, 0xf9, 0x79, 0x77, 0x54, 0x8c, 0x3f, 0xc8, 0xfb, 0x53, 0x2d, 0xba,
+-      0xbf, 0x3d, 0x5a, 0x96, 0xc6, 0x65, 0x3f, 0xec, 0x5d, 0x01, 0xb8, 0x98,
+-      0x77, 0xce, 0x26, 0xc2, 0x8d, 0x63, 0x9a, 0xfd, 0x14, 0xc4, 0x1a, 0xcc,
+-      0xdd, 0x87, 0xb0, 0xf2, 0x89, 0x56, 0xe2, 0x16, 0xba, 0x7c, 0x5c, 0x0e,
+-      0x94, 0x55, 0xfc, 0x42, 0x9d, 0x59, 0x4e, 0x43, 0x2f, 0x0c, 0x29, 0x9b,
+-      0x16, 0x0b, 0x0d, 0xd7, 0x32, 0x52, 0x38, 0xbd, 0x17, 0xe3, 0x30, 0x16,
+-      0x98, 0xd5, 0x67, 0x83, 0xfb, 0x64, 0x7f, 0x3d, 0x18, 0x7b, 0xb2, 0xcc,
+-      0xf7, 0x29, 0xe0, 0x04, 0xbe, 0xcf, 0x27, 0xc2, 0xea, 0x74, 0xe3, 0x56,
+-      0xb4, 0x6d, 0xd2, 0x74, 0xe6, 0xbd, 0x6b, 0xb6, 0xa7, 0x0e, 0x00, 0xc0,
+-      0x69, 0xc9, 0xe3, 0x3d, 0xdb, 0x98, 0xfe, 0x26, 0x61, 0xb7, 0xe8, 0x9f,
+-      0x3f, 0x2a, 0xcb, 0x95, 0x69, 0xb9, 0x5c, 0x31, 0xb2, 0xce, 0xbb, 0xd7,
+-      0x9c, 0xfb, 0x5d, 0xc1, 0xb7, 0xbf, 0xe5, 0x2c, 0xf8, 0xb3, 0x96, 0x56,
+-      0xf9, 0x35, 0xdf, 0xdb, 0xfc, 0x2b, 0x3b, 0xf8, 0xe6, 0x6d, 0xb7, 0xba,
+-      0xc3, 0xb5, 0x76, 0xcf, 0xb1, 0x9f, 0xfd, 0x36, 0xcf, 0x3a, 0x82, 0x7b,
+-      0x68, 0x9d, 0x0d, 0xef, 0xe3, 0xfa, 0xee, 0xd7, 0xa7, 0xec, 0x80, 0x8f,
+-      0xa4, 0xe7, 0x98, 0x9e, 0xef, 0xad, 0xd8, 0xff, 0xec, 0xf3, 0x31, 0xcd,
+-      0x37, 0xa4, 0x0b, 0x7c, 0xe6, 0xfe, 0x5a, 0xd6, 0xe7, 0xbf, 0xb6, 0x1e,
+-      0xa3, 0xf1, 0xee, 0x5d, 0x53, 0xc3, 0xb8, 0x6c, 0x4f, 0xfb, 0x64, 0xee,
+-      0x80, 0xb3, 0xec, 0xa4, 0xbe, 0xe3, 0x77, 0xb5, 0xa1, 0xcc, 0xdc, 0x45,
+-      0x23, 0xbd, 0x18, 0xd3, 0x44, 0x5a, 0x1f, 0xd3, 0xcf, 0x63, 0x0d, 0xdf,
+-      0xc8, 0x98, 0x3e, 0x23, 0xe8, 0xc3, 0xdc, 0x41, 0x6f, 0xbc, 0x53, 0xcc,
+-      0xef, 0x83, 0x28, 0x8b, 0x16, 0xbf, 0x61, 0xa6, 0x1f, 0x08, 0xec, 0xb6,
+-      0x45, 0x26, 0xd5, 0x7c, 0x8a, 0xea, 0xbe, 0x06, 0xbf, 0x9b, 0x19, 0xb2,
+-      0x83, 0xfc, 0xe4, 0xc2, 0x7a, 0x39, 0x65, 0xf9, 0x33, 0xcd, 0xd2, 0x52,
+-      0xc4, 0x38, 0x7c, 0xbf, 0xd1, 0xf7, 0xf4, 0x51, 0xfd, 0x9d, 0x90, 0x87,
+-      0x36, 0x4f, 0x50, 0xde, 0x8b, 0xc5, 0x95, 0x7b, 0xa2, 0xc5, 0xe0, 0x1b,
+-      0x26, 0xcb, 0xdc, 0xd7, 0xe4, 0x37, 0xda, 0x22, 0x17, 0x6a, 0xfc, 0x3e,
+-      0x69, 0xb7, 0xba, 0x47, 0x13, 0x9c, 0x4d, 0x72, 0x5e, 0x3d, 0xca, 0x2e,
+-      0x54, 0x6b, 0x25, 0xd2, 0x54, 0xdb, 0xf6, 0xa8, 0xb6, 0xed, 0xa4, 0xf1,
+-      0x08, 0x68, 0xfc, 0x25, 0xcd, 0x17, 0xb6, 0xcf, 0xaa, 0xfb, 0xdd, 0xd9,
+-      0x38, 0xcf, 0xc7, 0x1e, 0x53, 0x6b, 0xa1, 0x9d, 0x40, 0xdb, 0x5f, 0x0e,
+-      0xab, 0x78, 0xa7, 0xfa, 0x06, 0x1c, 0xf2, 0xc9, 0x6f, 0xba, 0xa1, 0xe3,
+-      0xcb, 0xfc, 0x76, 0x7b, 0x04, 0x29, 0xbf, 0xd9, 0xde, 0xab, 0xee, 0xff,
+-      0x57, 0xd5, 0x37, 0x01, 0x46, 0x1e, 0xc3, 0x7a, 0xac, 0x6f, 0x62, 0x8c,
+-      0x80, 0xef, 0x85, 0x32, 0xbf, 0xe5, 0x36, 0x77, 0x4c, 0x37, 0x2f, 0x73,
+-      0x4f, 0x88, 0xf2, 0xf3, 0x83, 0x6f, 0xfb, 0xab, 0xea, 0x3b, 0x82, 0x24,
+-      0xbf, 0x2b, 0x84, 0xfd, 0xba, 0x1f, 0xcf, 0x3c, 0x57, 0xde, 0x87, 0x14,
+-      0xfa, 0xa7, 0x36, 0x81, 0xf4, 0x61, 0xc9, 0xab, 0xb8, 0x5f, 0x2b, 0xf2,
+-      0x93, 0x6a, 0xec, 0x52, 0xed, 0x13, 0xb2, 0xff, 0xf4, 0x43, 0xfc, 0x5e,
+-      0x42, 0x7d, 0x77, 0x9e, 0xf3, 0x38, 0xc7, 0xb8, 0x4c, 0xa9, 0x75, 0x17,
+-      0x35, 0xed, 0xcd, 0x59, 0xcc, 0xcf, 0xd4, 0xb7, 0x19, 0xc5, 0x5a, 0x2b,
+-      0xe6, 0x18, 0xd2, 0xf7, 0x4c, 0xe9, 0x0f, 0x98, 0xf5, 0xb7, 0xf0, 0xee,
+-      0xa2, 0xcf, 0xf3, 0xc3, 0xfd, 0x65, 0xde, 0x23, 0x4d, 0xe9, 0x38, 0x01,
+-      0x63, 0x87, 0x3c, 0x9f, 0xa0, 0x8c, 0x3b, 0xe9, 0x09, 0x58, 0xa0, 0xa8,
+-      0x24, 0x78, 0xb6, 0xad, 0xd7, 0xd2, 0xda, 0xb0, 0x16, 0xde, 0x9d, 0x0d,
+-      0xd6, 0xc3, 0xef, 0x21, 0x0a, 0xe5, 0xc6, 0x6f, 0x2a, 0xd4, 0x37, 0xd0,
+-      0xfc, 0x76, 0x46, 0x26, 0x6a, 0x9f, 0x94, 0x07, 0xca, 0x5b, 0xf4, 0xf7,
+-      0x14, 0x31, 0x79, 0xa0, 0xf6, 0xba, 0xa2, 0x69, 0x41, 0x7d, 0xd7, 0x11,
+-      0xd5, 0x3c, 0x33, 0xdf, 0x54, 0x04, 0xfd, 0x1d, 0xa8, 0x39, 0x0d, 0xdf,
+-      0x2f, 0x44, 0x65, 0x62, 0xe1, 0x47, 0x91, 0x8d, 0xbf, 0x61, 0x78, 0x54,
+-      0x72, 0xa7, 0x69, 0xa3, 0xa7, 0xe5, 0xf1, 0x8a, 0xef, 0xdf, 0xe9, 0x11,
+-      0x5b, 0x6e, 0x96, 0xcb, 0xf1, 0xb1, 0x3d, 0x6f, 0xb8, 0x1d, 0xa1, 0xea,
+-      0x6c, 0x33, 0x74, 0x2f, 0xf1, 0x8c, 0xb4, 0x30, 0xbf, 0x30, 0xcb, 0x7d,
+-      0x1a, 0xc1, 0x1a, 0x1d, 0xfb, 0x9a, 0xdc, 0xde, 0xce, 0xb8, 0xdb, 0x9d,
+-      0xf0, 0x65, 0x7f, 0xdb, 0x0b, 0xf4, 0xf5, 0xe7, 0x16, 0xf7, 0xca, 0xe7,
+-      0x6a, 0xb1, 0x50, 0x75, 0x86, 0xf7, 0x0d, 0x9d, 0x91, 0x8a, 0xa4, 0x50,
+-      0x8f, 0xfd, 0x43, 0x5e, 0x12, 0xd7, 0xc9, 0xb3, 0x27, 0x7f, 0xea, 0x5f,
+-      0x73, 0xf1, 0x1e, 0xba, 0xe6, 0xb2, 0x67, 0x62, 0x8b, 0x63, 0xf0, 0x5d,
+-      0x59, 0xef, 0x3a, 0xc8, 0x01, 0xb0, 0x03, 0xf6, 0x1c, 0xfd, 0xdc, 0x6b,
+-      0x5a, 0x6f, 0x59, 0xc7, 0x6e, 0x92, 0x6b, 0x2b, 0xf7, 0x95, 0x5f, 0x83,
+-      0x6c, 0x27, 0x03, 0xfa, 0xab, 0x58, 0xfc, 0x21, 0x09, 0x7f, 0x1e, 0x36,
+-      0xe5, 0xf3, 0x4d, 0x4a, 0xb7, 0xd3, 0xb6, 0xc1, 0x07, 0x82, 0x9f, 0x13,
+-      0x41, 0x3f, 0xa9, 0xf6, 0x40, 0x66, 0xa7, 0x45, 0xbe, 0xb0, 0x49, 0xb2,
+-      0xed, 0xf4, 0xa3, 0xe5, 0xe7, 0xe8, 0xaf, 0xc6, 0x7d, 0x96, 0x96, 0x3f,
+-      0xe2, 0x1e, 0xaf, 0x73, 0x2d, 0xa9, 0xc4, 0x9f, 0xc9, 0xa7, 0x65, 0x22,
+-      0xc1, 0xb5, 0x3c, 0x2a, 0xc5, 0xca, 0x63, 0xf8, 0x71, 0x9d, 0x9c, 0xf7,
+-      0xc7, 0xf4, 0x5d, 0x86, 0x31, 0x29, 0xcd, 0x64, 0x64, 0x6a, 0x6e, 0x92,
+-      0xdf, 0xa0, 0x8e, 0xdc, 0xa9, 0xce, 0xf8, 0x9c, 0x44, 0x2a, 0xb4, 0x2d,
+-      0x39, 0xc5, 0xbb, 0x1b, 0x6a, 0x3d, 0x93, 0x58, 0xcf, 0xe3, 0xed, 0xbc,
+-      0xb3, 0x7e, 0x0d, 0xfa, 0xd7, 0x3a, 0x45, 0x39, 0x74, 0xec, 0xee, 0x10,
+-      0xf3, 0xfb, 0xe0, 0xbf, 0xb3, 0x6c, 0x9f, 0x84, 0x8f, 0xad, 0xe8, 0x79,
+-      0x94, 0xeb, 0xb3, 0x66, 0xd5, 0xfe, 0x14, 0xda, 0xa2, 0xde, 0x31, 0xd3,
+-      0xd6, 0xd4, 0x61, 0x5b, 0xae, 0x73, 0xaf, 0x34, 0x9f, 0x33, 0xf3, 0x82,
+-      0x1c, 0x26, 0x1a, 0xe9, 0xdd, 0xb2, 0x8e, 0xde, 0x11, 0x62, 0x5e, 0xd0,
+-      0x8b, 0x34, 0x0e, 0x6b, 0x1a, 0x7f, 0x05, 0xfd, 0x1b, 0x1e, 0xdc, 0x89,
+-      0x32, 0x5b, 0x7f, 0x93, 0xf4, 0x7e, 0xe8, 0x4e, 0x9a, 0xb3, 0x3e, 0xe9,
+-      0x4e, 0xd9, 0xe2, 0x7c, 0x36, 0xa2, 0xf9, 0xeb, 0x9a, 0x2f, 0xfb, 0x40,
+-      0x2f, 0xde, 0x2b, 0xdd, 0xa6, 0xbe, 0x2f, 0xc8, 0x8e, 0xef, 0x83, 0xec,
+-      0x98, 0x75, 0x6d, 0x83, 0x8c, 0xf1, 0xdc, 0x84, 0xf5, 0x1b, 0x69, 0x12,
+-      0xd8, 0xbd, 0x30, 0x63, 0x1f, 0x2e, 0xd7, 0x0a, 0x5c, 0xfa, 0x05, 0xda,
+-      0x28, 0x7e, 0x63, 0x7d, 0xb3, 0xb6, 0x51, 0x3f, 0x8f, 0xc7, 0x3f, 0x6a,
+-      0x0f, 0x6c, 0x94, 0x0d, 0x9a, 0xb4, 0xe9, 0x36, 0xfb, 0x80, 0x91, 0x19,
+-      0x0f, 0x4e, 0x25, 0x1e, 0x14, 0x33, 0x8e, 0xbf, 0x9b, 0x7e, 0xef, 0xd0,
+-      0xc0, 0x36, 0xa0, 0x16, 0x75, 0x67, 0x27, 0xc1, 0x3b, 0x40, 0xa9, 0xd0,
+-      0x3e, 0x75, 0x7f, 0x63, 0xed, 0xf7, 0x23, 0x69, 0x79, 0x76, 0x55, 0x56,
+-      0x46, 0x7e, 0x28, 0x8e, 0x24, 0x6f, 0xa4, 0xac, 0xb0, 0xdf, 0x49, 0xae,
+-      0x33, 0xf1, 0x90, 0x5a, 0xa7, 0x0d, 0x3f, 0x92, 0x77, 0x2d, 0xec, 0x50,
+-      0x75, 0x8e, 0x7c, 0x47, 0xba, 0xc8, 0x67, 0x73, 0xde, 0xab, 0xf4, 0x0a,
+-      0xc6, 0x65, 0x19, 0x75, 0x23, 0xdf, 0x67, 0xf4, 0x79, 0x70, 0x7b, 0x07,
+-      0xef, 0x24, 0x14, 0x50, 0x56, 0x59, 0xdc, 0x78, 0x6e, 0xbf, 0xad, 0xe4,
+-      0xe0, 0x51, 0xd0, 0xfd, 0x9f, 0xa1, 0xee, 0x63, 0x48, 0xb9, 0xc6, 0xcc,
+-      0x0a, 0xdf, 0x49, 0xef, 0x8f, 0xca, 0x20, 0xe4, 0x82, 0xf9, 0x47, 0x81,
+-      0x37, 0x69, 0x4f, 0x91, 0x56, 0xf8, 0x4c, 0x5d, 0xef, 0x6a, 0x7b, 0xca,
+-      0xb9, 0xec, 0xc3, 0x5c, 0xd4, 0x3a, 0xb5, 0x3c, 0xdd, 0xaf, 0xdb, 0x8d,
+-      0xaf, 0xd0, 0xea, 0xa1, 0x77, 0xe0, 0x8d, 0xe8, 0x0a, 0xde, 0x08, 0xc6,
+-      0xca, 0x76, 0x18, 0xac, 0x11, 0xac, 0x21, 0xc0, 0x1a, 0x81, 0x9c, 0x4f,
+-      0x4a, 0x04, 0x72, 0x1c, 0x5e, 0x95, 0x63, 0xe0, 0x9e, 0x60, 0xcf, 0x4c,
+-      0xf1, 0x1c, 0x53, 0xd1, 0x99, 0x72, 0x48, 0xf9, 0x25, 0x1f, 0x1b, 0x79,
+-      0x7d, 0xfb, 0xbb, 0xf0, 0xba, 0xd4, 0x61, 0xf0, 0xc3, 0x3f, 0x6c, 0x1f,
+-      0x3c, 0xd2, 0xb1, 0xba, 0x0f, 0x6e, 0xfa, 0x05, 0xed, 0x83, 0xf5, 0x72,
+-      0xd9, 0x28, 0x53, 0x36, 0xe4, 0x89, 0xfc, 0xa2, 0x3c, 0x51, 0x8e, 0x48,
+-      0x4b, 0xea, 0xd3, 0x66, 0xfa, 0x6f, 0x89, 0xab, 0xea, 0xdb, 0x91, 0x69,
+-      0xe8, 0xa0, 0x8e, 0x50, 0xa5, 0x12, 0x97, 0xd2, 0xe2, 0x4f, 0x94, 0x4c,
+-      0x3f, 0x5b, 0xa7, 0x5e, 0x7a, 0xaf, 0xb5, 0xaf, 0xd5, 0xb9, 0x85, 0x75,
+-      0x3a, 0xb7, 0xb0, 0xa2, 0x73, 0xdb, 0xb5, 0xcf, 0xf6, 0x0f, 0xd1, 0xb9,
+-      0xf1, 0x86, 0xb3, 0x21, 0x73, 0x2e, 0x24, 0xa1, 0x5c, 0x5f, 0x8b, 0xec,
+-      0x81, 0x1d, 0x19, 0x99, 0xd9, 0x2b, 0x7f, 0x30, 0x33, 0xad, 0xee, 0x49,
+-      0x7d, 0xd3, 0x4b, 0x25, 0x3e, 0x11, 0xf2, 0xe5, 0xa3, 0xf0, 0xb9, 0x27,
+-      0xba, 0x9a, 0x64, 0xcf, 0x6d, 0xea, 0xbc, 0xd3, 0xce, 0x85, 0x3a, 0x85,
+-      0x91, 0xf8, 0xbc, 0xe7, 0x78, 0xc9, 0x10, 0xef, 0xcc, 0x35, 0xcb, 0x44,
+-      0xbc, 0x55, 0xf6, 0x02, 0x3b, 0x15, 0xaf, 0xf7, 0xd4, 0x37, 0xd3, 0x59,
+-      0x75, 0x9e, 0xf4, 0x86, 0xe6, 0x3b, 0xe8, 0xd0, 0x66, 0xcb, 0x7f, 0xac,
+-      0x33, 0xcf, 0xf2, 0x07, 0xd7, 0xe5, 0xf9, 0xfc, 0x04, 0xfc, 0xb9, 0x38,
+-      0x68, 0xd5, 0x78, 0xff, 0x28, 0xac, 0xe8, 0x59, 0xaa, 0x8c, 0xab, 0x7b,
+-      0x5d, 0x57, 0xc3, 0xa4, 0x97, 0xf2, 0xa1, 0x12, 0xb9, 0x30, 0x30, 0xce,
+-      0x2c, 0x90, 0xb4, 0x4b, 0xbf, 0x53, 0xe3, 0x4f, 0xe8, 0xff, 0xfd, 0xea,
+-      0x7c, 0x79, 0x19, 0xb4, 0xf1, 0x55, 0xfc, 0xb9, 0x10, 0x27, 0xae, 0x5f,
+-      0xbd, 0xc3, 0xfc, 0x4e, 0x7c, 0xaf, 0xb0, 0xbd, 0x39, 0x0b, 0xd1, 0xf1,
+-      0x2a, 0x1d, 0x07, 0x50, 0x67, 0x7b, 0x1b, 0xfd, 0xbf, 0x0b, 0xc4, 0x7a,
+-      0xfc, 0xae, 0x9f, 0xd8, 0xce, 0x39, 0x5a, 0x91, 0x1f, 0x2a, 0x5f, 0x34,
+-      0x4b, 0xfa, 0x56, 0xc1, 0xa7, 0xe3, 0x09, 0x63, 0xcf, 0x43, 0xdd, 0xe7,
+-      0x1b, 0x7d, 0x51, 0xf6, 0x11, 0x53, 0x77, 0x42, 0x56, 0xff, 0x9f, 0x17,
+-      0xc6, 0x98, 0xb2, 0xa1, 0xbb, 0xcb, 0xd3, 0x12, 0x3e, 0x31, 0x26, 0x91,
+-      0xe3, 0x8c, 0xe7, 0x67, 0xa5, 0x14, 0xf7, 0xe5, 0x01, 0x6f, 0xad, 0x6f,
+-      0xd2, 0x6d, 0xad, 0x9f, 0xfb, 0xa3, 0x32, 0x74, 0xfa, 0x31, 0x89, 0x9e,
+-      0xe0, 0xbb, 0x35, 0x67, 0x39, 0xd0, 0x47, 0x9b, 0xa5, 0x12, 0x67, 0x4c,
+-      0x3b, 0xaa, 0xce, 0xc6, 0x2f, 0x8f, 0xbf, 0x1e, 0x2d, 0x01, 0x2b, 0x14,
+-      0x94, 0x6e, 0x41, 0xba, 0xe2, 0x4b, 0xe4, 0xae, 0xe3, 0x9e, 0x82, 0xbf,
+-      0x19, 0x9a, 0xa8, 0x44, 0xd5, 0x1d, 0xa5, 0xcb, 0x71, 0xd6, 0x7d, 0x0c,
+-      0x7e, 0x37, 0x71, 0x06, 0x74, 0xc7, 0x98, 0xb4, 0x30, 0x1f, 0x3e, 0xb1,
+-      0x8a, 0x33, 0xa8, 0x13, 0x86, 0xbc, 0xb8, 0x44, 0xce, 0x04, 0x6b, 0xe7,
+-      0x7f, 0x1c, 0x64, 0xcd, 0xef, 0x95, 0xf0, 0x71, 0x3e, 0x37, 0xfa, 0x43,
+-      0xc4, 0xee, 0xb0, 0x0d, 0xe7, 0x7f, 0x1f, 0xfd, 0xf1, 0x5d, 0x56, 0x7f,
+-      0x87, 0x8b, 0x7c, 0xf5, 0xef, 0xfa, 0x7f, 0x04, 0x50, 0xf6, 0xff, 0x3f,
+-      0xc3, 0x8e, 0xbb, 0xb0, 0xa8, 0x4d, 0x00, 0x00, 0x00 };
++      0xcd, 0x7c, 0x0d, 0x70, 0x5b, 0xd7, 0x95, 0xde, 0xc1, 0x03, 0x40, 0x82,
++      0x10, 0x45, 0x3d, 0x52, 0x30, 0x0d, 0x3b, 0x4c, 0x82, 0x47, 0x3c, 0x92,
++      0xb0, 0xc9, 0x64, 0x9f, 0x64, 0x46, 0x66, 0x12, 0xac, 0x05, 0x03, 0xa4,
++      0x4c, 0x27, 0xea, 0x92, 0xb6, 0x19, 0x47, 0x6d, 0x35, 0x09, 0x17, 0x92,
++      0x12, 0xdb, 0x4d, 0xa7, 0x9a, 0xc6, 0xe9, 0x2a, 0x1b, 0xc7, 0x82, 0x41,
++      0xca, 0x51, 0x52, 0x8a, 0x60, 0x24, 0x4a, 0xf2, 0x74, 0xb3, 0xbb, 0x0c,
++      0x48, 0x4a, 0x8e, 0x03, 0x09, 0x96, 0xec, 0x75, 0xdc, 0xad, 0xb3, 0x62,
++      0x68, 0xad, 0xec, 0x4d, 0xb3, 0xad, 0x9d, 0x49, 0x3a, 0x9a, 0xa9, 0xb7,
++      0x55, 0x95, 0xa4, 0xf9, 0x99, 0xfe, 0xb8, 0x49, 0xa6, 0x75, 0xbb, 0xf1,
++      0xbe, 0x7e, 0xdf, 0x7d, 0xf7, 0x11, 0x20, 0xc5, 0x28, 0xde, 0xec, 0x64,
++      0x66, 0x39, 0x83, 0xb9, 0xef, 0xde, 0x77, 0x7f, 0xce, 0x3d, 0xf7, 0xfc,
++      0x7c, 0xe7, 0xde, 0xfb, 0x78, 0x87, 0x48, 0x54, 0xf4, 0xdf, 0x46, 0xfc,
++      0xfa, 0xff, 0xe9, 0x3f, 0xdb, 0xb3, 0xf5, 0xdd, 0xfd, 0xef, 0x66, 0xde,
++      0x30, 0x42, 0x21, 0xa6, 0x41, 0xfc, 0x62, 0xf8, 0x6d, 0xd5, 0xcf, 0xeb,
++      0xfd, 0x99, 0xf8, 0x6d, 0x0b, 0x88, 0x8c, 0xff, 0x44, 0x24, 0xb0, 0xe6,
++      0x5d, 0x64, 0x9d, 0xfa, 0xae, 0xfb, 0x4b, 0x3a, 0xd2, 0x7f, 0x06, 0x7e,
++      0x89, 0xeb, 0x57, 0x59, 0x19, 0xf7, 0xd7, 0xfd, 0x0b, 0xea, 0xe6, 0x1b,
++      0xf5, 0x4f, 0x22, 0x46, 0x5a, 0x46, 0xb2, 0xb6, 0x44, 0x82, 0xe9, 0x9f,
++      0x8f, 0xec, 0xb1, 0x45, 0x32, 0x95, 0xde, 0x44, 0x4e, 0xde, 0x74, 0x0b,
++      0xb1, 0x90, 0xb0, 0xfc, 0xed, 0xe9, 0x5f, 0x1c, 0xfc, 0xfa, 0xed, 0xd6,
++      0xeb, 0x73, 0x41, 0x89, 0x98, 0xe9, 0x37, 0xc4, 0xec, 0x96, 0x48, 0x07,
++      0xda, 0x7c, 0xa9, 0xe7, 0x49, 0x43, 0x5a, 0xfc, 0xbe, 0xcc, 0xf1, 0x60,
++      0x5a, 0x46, 0xf7, 0x4e, 0x1d, 0x74, 0x0d, 0x5b, 0x0a, 0x37, 0xa7, 0xed,
++      0x44, 0x51, 0x9a, 0x07, 0x26, 0xfb, 0x6f, 0x17, 0xe4, 0x47, 0xf7, 0x56,
++      0x22, 0x92, 0xad, 0x16, 0x9a, 0x0d, 0xdb, 0x46, 0x1a, 0x29, 0xbc, 0x2d,
++      0x2d, 0x91, 0x86, 0xf4, 0x6c, 0xe3, 0x25, 0x9b, 0xe3, 0x0f, 0x60, 0xfc,
++      0xb7, 0x49, 0xc8, 0x76, 0xdd, 0x49, 0x8c, 0xbf, 0xa3, 0xf2, 0xa6, 0xfb,
++      0x58, 0xc8, 0x1b, 0xdb, 0x48, 0x1f, 0x08, 0x32, 0x0d, 0xa4, 0x33, 0x23,
++      0x9d, 0x15, 0x95, 0x6f, 0xf0, 0xf2, 0x83, 0x3a, 0x1f, 0x89, 0x7a, 0xb4,
++      0x4b, 0x13, 0x68, 0x8f, 0x84, 0xd2, 0xe9, 0x26, 0xf4, 0x11, 0x09, 0xa7,
++      0x97, 0x7e, 0x7b, 0x51, 0xd5, 0x3b, 0xac, 0xeb, 0x3d, 0x10, 0xf6, 0xda,
++      0x4d, 0x8e, 0x74, 0x57, 0x98, 0xce, 0x8e, 0x74, 0xa9, 0xf4, 0x4b, 0x23,
++      0x49, 0x95, 0xce, 0xa9, 0x7a, 0x81, 0xf4, 0xc2, 0x88, 0xad, 0xd2, 0xb4,
++      0x2e, 0x1f, 0x1e, 0x49, 0xa8, 0x74, 0xa7, 0x4e, 0x47, 0x75, 0x3a, 0xa6,
++      0xd3, 0x5d, 0x3a, 0xdd, 0xad, 0xd3, 0x71, 0x9d, 0xee, 0xd5, 0xfd, 0x3c,
++      0xa0, 0xf3, 0x9f, 0xd0, 0xe9, 0x7e, 0x9d, 0x3e, 0xac, 0xd3, 0x03, 0x3a,
++      0x7d, 0x44, 0xd3, 0x55, 0xd0, 0xe9, 0x94, 0x2e, 0x9f, 0xd1, 0x74, 0x3e,
++      0x01, 0x7a, 0xfe, 0x71, 0xa3, 0x96, 0x5b, 0xcc, 0x37, 0x21, 0x7b, 0xa6,
++      0x22, 0x52, 0x2c, 0x05, 0x25, 0xa7, 0xd6, 0xf3, 0xe3, 0x61, 0x89, 0x46,
++      0x64, 0xa2, 0x1a, 0x91, 0x2b, 0x4a, 0x5c, 0x7f, 0xe4, 0x7e, 0xbd, 0xc7,
++      0x94, 0xa7, 0xab, 0x31, 0xb9, 0x50, 0x95, 0xc0, 0x68, 0x4f, 0x93, 0x18,
++      0x47, 0x6f, 0x96, 0x8c, 0x19, 0x90, 0xa0, 0xe2, 0x6b, 0x42, 0xb2, 0x53,
++      0xed, 0xc8, 0x5b, 0x71, 0x91, 0xc5, 0xb0, 0xb7, 0x8e, 0x11, 0x09, 0x9e,
++      0xe0, 0xba, 0x3c, 0x37, 0x72, 0x69, 0x36, 0x2e, 0xa1, 0xe9, 0x04, 0xfa,
++      0x6f, 0x96, 0xf0, 0x09, 0xe9, 0x08, 0x4a, 0x57, 0xfc, 0x63, 0xa8, 0x31,
++      0x58, 0x09, 0xc9, 0x50, 0x25, 0x80, 0xb5, 0x8a, 0x40, 0x4e, 0x9a, 0xf1,
++      0x33, 0xf1, 0x8b, 0xe1, 0x17, 0xc7, 0xef, 0xaf, 0xd0, 0x4f, 0x87, 0xe4,
++      0x2a, 0xec, 0x13, 0xe3, 0x96, 0x30, 0x7e, 0xc9, 0x32, 0xc7, 0x85, 0x34,
++      0xc5, 0xe5, 0xeb, 0x3d, 0x1e, 0x4d, 0x17, 0xaa, 0x91, 0x40, 0xf6, 0xa4,
++      0xec, 0xcf, 0x39, 0x92, 0x30, 0xec, 0xa8, 0xe4, 0xcd, 0x40, 0x62, 0x6f,
++      0xaa, 0x4d, 0x0a, 0x63, 0x78, 0x57, 0x92, 0x8c, 0x81, 0xbe, 0xf3, 0xa6,
++      0x8c, 0x7b, 0xef, 0x58, 0xf6, 0x7f, 0xa1, 0xaf, 0x96, 0x49, 0xc1, 0xbd,
++      0x50, 0xfa, 0xd7, 0x78, 0x66, 0x5f, 0x2f, 0x86, 0x3c, 0x9a, 0xdf, 0x40,
++      0x9e, 0xe5, 0xee, 0x26, 0x2f, 0xcf, 0x67, 0xd6, 0xf5, 0xc7, 0xf4, 0xe7,
++      0xca, 0xb1, 0x7b, 0x30, 0x5f, 0x8e, 0xbf, 0x32, 0x5f, 0xd0, 0xd1, 0x1c,
++      0xc8, 0x9d, 0x4c, 0xc8, 0xa1, 0xd2, 0x1d, 0x92, 0x75, 0x5c, 0x77, 0x8f,
++      0x23, 0x31, 0x43, 0xba, 0xcc, 0x1c, 0xde, 0x96, 0x2b, 0x12, 0xc8, 0x96,
++      0x7c, 0x7e, 0xb0, 0xdf, 0x10, 0xca, 0xda, 0x51, 0xbf, 0x25, 0x30, 0x78,
++      0x12, 0xb4, 0xa7, 0xc9, 0x17, 0xc8, 0xac, 0xd3, 0x15, 0xdf, 0x8b, 0xf1,
++      0xe6, 0x2b, 0x5d, 0xce, 0xb2, 0x98, 0xe8, 0xb3, 0x0d, 0x75, 0xc8, 0x23,
++      0xf6, 0xc5, 0x3e, 0xd9, 0x5f, 0x33, 0xda, 0xc6, 0xf0, 0x8e, 0x34, 0xb9,
++      0x6e, 0xd6, 0x31, 0x99, 0x97, 0x39, 0xf0, 0x6d, 0x8e, 0x7c, 0x8b, 0x76,
++      0xc8, 0xa9, 0x0a, 0xc7, 0x58, 0x8f, 0xee, 0x5b, 0xff, 0x9e, 0xd1, 0x1d,
++      0x47, 0xff, 0x31, 0xa4, 0x1b, 0x02, 0xd9, 0x63, 0x2e, 0xc6, 0x8f, 0xe3,
++      0x79, 0xbd, 0x39, 0x5c, 0xd1, 0x32, 0x18, 0x07, 0xed, 0x31, 0x39, 0xa7,
++      0xe4, 0x70, 0x83, 0x04, 0x21, 0x87, 0x5c, 0xe3, 0xd6, 0x13, 0xef, 0x91,
++      0x7c, 0xcc, 0x4a, 0xd0, 0x76, 0x76, 0x6e, 0x6d, 0xc2, 0x1c, 0xb5, 0x15,
++      0x9c, 0x8e, 0x41, 0x0e, 0x97, 0x5b, 0x0d, 0x94, 0x18, 0x62, 0x99, 0xff,
++      0x48, 0x0a, 0x92, 0x5b, 0xf8, 0xbd, 0x80, 0x44, 0x0d, 0xd4, 0xbb, 0x25,
++      0xe0, 0xf1, 0x80, 0xfc, 0xc9, 0x80, 0x3f, 0x01, 0xd1, 0xf6, 0x41, 0x3a,
++      0x2b, 0x7c, 0xdf, 0x9b, 0x30, 0xd4, 0xbb, 0x41, 0xbc, 0x0b, 0x49, 0x72,
++      0xab, 0xff, 0x7e, 0x10, 0xef, 0x6f, 0x96, 0x71, 0x13, 0xb4, 0x94, 0x9e,
++      0x37, 0xb2, 0xa0, 0xf1, 0xce, 0x90, 0x9a, 0x2b, 0xea, 0x8e, 0xd7, 0xf5,
++      0x33, 0x8e, 0x7a, 0xff, 0x0a, 0x63, 0x81, 0xde, 0x52, 0x02, 0xb4, 0xb4,
++      0x83, 0x16, 0xd2, 0x58, 0x30, 0xb2, 0xd5, 0x10, 0xf2, 0x93, 0x46, 0xee,
++      0xf4, 0x61, 0x3c, 0x8b, 0x69, 0xa4, 0x9f, 0x67, 0x8a, 0xf6, 0xbb, 0xeb,
++      0xda, 0xef, 0x46, 0x7b, 0x8e, 0xc1, 0xf6, 0x9e, 0xfc, 0x17, 0x94, 0x2c,
++      0x26, 0xae, 0xc3, 0x8f, 0xe0, 0xaf, 0xc1, 0x8f, 0x7f, 0xa3, 0xf9, 0xf1,
++      0xd7, 0xf2, 0x9b, 0xe7, 0xc7, 0x7f, 0xfa, 0x0d, 0xf1, 0x43, 0x24, 0x7f,
++      0x8c, 0xcf, 0x21, 0x29, 0x28, 0xbb, 0x45, 0xbd, 0xa5, 0xbc, 0xd3, 0x66,
++      0x91, 0x4f, 0x94, 0x63, 0xe8, 0x40, 0x35, 0x84, 0xf4, 0x49, 0xa4, 0x1b,
++      0x02, 0xa3, 0xc7, 0xae, 0x62, 0xfd, 0x5d, 0x31, 0xb7, 0xfa, 0x7e, 0xa3,
++      0x10, 0x37, 0xa5, 0x43, 0xcc, 0x77, 0xc3, 0x69, 0xb7, 0x5b, 0x66, 0x5e,
++      0x7e, 0x80, 0xf7, 0x6f, 0x06, 0x7c, 0xff, 0x9e, 0x9d, 0x6a, 0x7a, 0x23,
++      0xa3, 0x9e, 0xc2, 0xe4, 0x67, 0xc6, 0x48, 0x87, 0x02, 0xb9, 0x52, 0x62,
++      0xdc, 0x48, 0xc7, 0x60, 0xa7, 0x98, 0x1f, 0x08, 0x78, 0x34, 0xf7, 0xa3,
++      0xae, 0x6f, 0xb3, 0x7c, 0xda, 0xfb, 0x41, 0xfb, 0x5a, 0xdb, 0x95, 0x01,
++      0x2d, 0xa4, 0x81, 0x74, 0x15, 0x82, 0x9a, 0xf7, 0xe8, 0xe7, 0x80, 0xea,
++      0x27, 0x98, 0x1e, 0x10, 0xfa, 0xd0, 0xfc, 0x14, 0xf5, 0x80, 0xed, 0xd8,
++      0x97, 0x67, 0x93, 0xf3, 0x15, 0xbf, 0x8f, 0x42, 0x7d, 0x1f, 0xa0, 0x47,
++      0x36, 0x19, 0x76, 0x18, 0x6b, 0xcf, 0xae, 0x0e, 0xe3, 0xdd, 0x97, 0x24,
++      0x7b, 0xfa, 0x76, 0x03, 0x73, 0x40, 0xbf, 0xe4, 0xd1, 0x28, 0x6c, 0x36,
++      0xf5, 0x2c, 0x22, 0xb9, 0x18, 0xcb, 0x3e, 0xa2, 0xc7, 0x0d, 0x49, 0x46,
++      0xe5, 0xbf, 0xd2, 0x52, 0xa3, 0xe3, 0x79, 0x3d, 0x9f, 0x34, 0xe6, 0x43,
++      0x1a, 0xfc, 0xb9, 0xa4, 0xeb, 0xe6, 0xe2, 0xf3, 0x9a, 0xbc, 0x30, 0x61,
++      0xe3, 0x23, 0xda, 0x87, 0xb0, 0xdd, 0x64, 0xdd, 0xda, 0x4d, 0xa2, 0x0d,
++      0x79, 0x8f, 0x3a, 0x6b, 0xfc, 0x0a, 0x7d, 0xca, 0x20, 0xfa, 0x29, 0xce,
++      0x1a, 0x92, 0x73, 0xe0, 0xab, 0x9d, 0xb7, 0x69, 0x79, 0xad, 0xc9, 0x52,
++      0x78, 0x5d, 0x59, 0x3a, 0x68, 0x78, 0xf6, 0x1a, 0xbe, 0x05, 0xfe, 0x67,
++      0x62, 0xd6, 0x4a, 0xf9, 0xb2, 0x54, 0x9c, 0x7a, 0x2b, 0xb2, 0xe4, 0xb7,
++      0x8f, 0x40, 0x76, 0xfd, 0x31, 0xd6, 0xd2, 0xec, 0xd7, 0x01, 0x8d, 0xa5,
++      0xac, 0xc6, 0x28, 0x1c, 0xc7, 0xf3, 0x0d, 0x73, 0xab, 0x7c, 0xc3, 0x61,
++      0xb4, 0x95, 0x40, 0xae, 0xa7, 0x59, 0xf6, 0xcd, 0xfa, 0x7d, 0x1c, 0x56,
++      0x32, 0xbb, 0x77, 0xca, 0x32, 0x87, 0x82, 0x92, 0x19, 0x9a, 0x19, 0x90,
++      0xc1, 0x6a, 0x07, 0xd6, 0xf4, 0x0d, 0x17, 0xbe, 0xf3, 0xdd, 0x61, 0xb1,
++      0x61, 0x17, 0x31, 0xe7, 0x7e, 0xf0, 0xb8, 0x1a, 0x16, 0x23, 0xed, 0x20,
++      0xad, 0xc7, 0x58, 0xa1, 0xd0, 0xd0, 0xaa, 0x7c, 0x03, 0xea, 0xa0, 0xef,
++      0xfe, 0xb5, 0xf5, 0x20, 0x9f, 0xe0, 0x6d, 0xd6, 0x79, 0xd3, 0x85, 0x1f,
++      0xd6, 0x3e, 0x8b, 0xa5, 0xb4, 0x13, 0xbe, 0x8d, 0xf8, 0x10, 0xf4, 0x5b,
++      0xe9, 0x42, 0xc1, 0x48, 0xef, 0x47, 0x1f, 0xa2, 0xe4, 0xb4, 0x58, 0x7d,
++      0xda, 0xd7, 0x7b, 0x55, 0xbe, 0xa3, 0x9f, 0xb2, 0x37, 0x07, 0x4c, 0xc0,
++      0x39, 0x2d, 0x28, 0x5d, 0xcf, 0x99, 0x31, 0x99, 0x2c, 0x29, 0x4c, 0x23,
++      0xc9, 0xca, 0x1f, 0x49, 0xee, 0xb4, 0xc8, 0x37, 0xa7, 0x58, 0xef, 0x05,
++      0x5d, 0xef, 0x79, 0xd4, 0x4b, 0x26, 0x06, 0x03, 0x16, 0xfc, 0x80, 0x05,
++      0x35, 0xe9, 0x4d, 0x20, 0x35, 0x87, 0xf1, 0x1b, 0xa4, 0x93, 0x41, 0x3d,
++      0x0f, 0x03, 0x3d, 0x0f, 0x7e, 0x88, 0xdc, 0x53, 0x6a, 0x84, 0x3d, 0xf9,
++      0x2f, 0xa0, 0x35, 0x26, 0x5f, 0xc0, 0x3c, 0x2e, 0x4d, 0x11, 0x67, 0xbd,
++      0x20, 0x8b, 0x53, 0xc4, 0x5d, 0xcf, 0xcb, 0xe4, 0x54, 0xd2, 0xf9, 0x26,
++      0xf8, 0x7c, 0x4a, 0x38, 0x97, 0x5e, 0x07, 0x29, 0x30, 0xa0, 0x95, 0x78,
++      0x1c, 0xf6, 0xac, 0x67, 0xab, 0xd7, 0x5f, 0x97, 0xee, 0xcf, 0xae, 0x58,
++      0x72, 0xc5, 0xa4, 0x7d, 0xba, 0x56, 0xc7, 0xb3, 0x5a, 0xc7, 0x47, 0x9d,
++      0x0e, 0x31, 0xa0, 0xd7, 0x99, 0xb1, 0x02, 0xbc, 0x1f, 0xf5, 0xfa, 0x7f,
++      0x1b, 0x35, 0xfc, 0x33, 0x00, 0xac, 0x6a, 0x29, 0x7f, 0xf7, 0xb7, 0xd3,
++      0xf1, 0x7a, 0xdd, 0xe6, 0xf8, 0x2d, 0x68, 0x13, 0x42, 0x7a, 0x7d, 0xbd,
++      0x46, 0x1f, 0x75, 0x6d, 0x07, 0xa8, 0x17, 0x68, 0xf3, 0x07, 0xe0, 0x05,
++      0xf9, 0xff, 0x56, 0xf4, 0xb9, 0x37, 0xf8, 0x96, 0xf4, 0x79, 0xec, 0x7a,
++      0xfa, 0x5c, 0xaf, 0xcb, 0x67, 0xc9, 0x0b, 0x8c, 0x2d, 0x33, 0x9e, 0x6c,
++      0x75, 0x81, 0xd7, 0x09, 0xc8, 0x29, 0x68, 0x28, 0xfd, 0x8d, 0x9b, 0x09,
++      0x79, 0x78, 0xce, 0x93, 0x27, 0xd6, 0xf3, 0xeb, 0x78, 0xb6, 0x77, 0xb0,
++      0x7a, 0x45, 0xd9, 0xd9, 0x73, 0xca, 0xce, 0x5a, 0x87, 0x0b, 0x42, 0x79,
++      0xbb, 0x2d, 0x48, 0xbe, 0x3f, 0xed, 0x7c, 0x16, 0x34, 0x5a, 0x89, 0x84,
++      0xd1, 0x55, 0x30, 0x8c, 0xcf, 0xca, 0xfe, 0xf9, 0x87, 0x65, 0x7f, 0x89,
++      0x7d, 0xa4, 0xf1, 0xde, 0x46, 0x59, 0x13, 0x6c, 0x2d, 0x6d, 0xfa, 0x1b,
++      0x01, 0x6f, 0x2c, 0x03, 0xfe, 0x6b, 0x29, 0x70, 0x4f, 0xf5, 0x62, 0x20,
++      0x3b, 0x4f, 0xdd, 0x45, 0x79, 0xb5, 0xde, 0xe6, 0xfb, 0xf6, 0xbe, 0x66,
++      0xff, 0x06, 0x4b, 0x93, 0xc4, 0x80, 0x46, 0xd6, 0xe1, 0x9a, 0x51, 0x37,
++      0x2f, 0x98, 0xde, 0x9c, 0x3f, 0x09, 0x3e, 0x51, 0xaf, 0xc9, 0x37, 0xf8,
++      0xc0, 0x10, 0x75, 0x96, 0xcf, 0xe2, 0x06, 0xd3, 0xd4, 0x3b, 0x09, 0x05,
++      0x41, 0x46, 0x2e, 0xc6, 0x3a, 0x77, 0x80, 0xce, 0xb5, 0x3a, 0xcd, 0x75,
++      0x14, 0x6d, 0x43, 0x58, 0x36, 0x80, 0xe7, 0x4e, 0x19, 0x9f, 0xcf, 0x60,
++      0xcc, 0x3b, 0x75, 0xdf, 0xab, 0x7c, 0x0c, 0xfa, 0x48, 0xe8, 0xf5, 0xd8,
++      0xe0, 0xdb, 0x41, 0x94, 0x39, 0xba, 0xac, 0xa1, 0xae, 0xcc, 0x5f, 0xb7,
++      0x8f, 0x62, 0x7c, 0xfa, 0x8a, 0x61, 0x8d, 0x7f, 0x5c, 0x37, 0xc7, 0xf5,
++      0xee, 0xfb, 0x87, 0x42, 0xdd, 0xb8, 0x50, 0x2a, 0x98, 0x41, 0x25, 0xa3,
++      0x2f, 0xfc, 0x4e, 0x4d, 0x46, 0x81, 0x97, 0x55, 0x2f, 0xe4, 0x31, 0x69,
++      0x69, 0x06, 0x4f, 0x07, 0x41, 0x2b, 0x78, 0xd7, 0x1e, 0x00, 0xff, 0x9a,
++      0x25, 0x5f, 0x4d, 0xeb, 0x77, 0x2c, 0x0f, 0xc9, 0x68, 0xcc, 0xf7, 0x47,
++      0xb7, 0x99, 0x1e, 0xe6, 0x45, 0x9d, 0xd2, 0x8f, 0x83, 0x9e, 0x0e, 0x98,
++      0x92, 0x3f, 0x39, 0x08, 0x59, 0x23, 0x26, 0x6b, 0x80, 0xac, 0xc5, 0x94,
++      0xad, 0x37, 0x6c, 0xd6, 0xc7, 0xbb, 0xd3, 0xbf, 0x17, 0xf4, 0xda, 0xb0,
++      0x9e, 0xdf, 0xc6, 0x1f, 0xbb, 0x6d, 0xa5, 0xed, 0xa8, 0x63, 0x48, 0x50,
++      0x8d, 0x8f, 0xb2, 0xd3, 0xab, 0xc7, 0x37, 0xda, 0xfd, 0xf1, 0x1f, 0xd1,
++      0x7d, 0xb5, 0xd5, 0xf5, 0x15, 0xbb, 0xce, 0xf8, 0x78, 0x77, 0xfa, 0xa3,
++      0x9b, 0xbd, 0x36, 0xb1, 0xba, 0x36, 0xed, 0x6b, 0xda, 0xb0, 0xbe, 0x3f,
++      0x06, 0xde, 0x9d, 0xbe, 0xab, 0xd9, 0x6b, 0xc3, 0x7a, 0x0d, 0xf0, 0x6d,
++      0x7c, 0x47, 0xd9, 0xdf, 0x5f, 0x27, 0xfb, 0xfb, 0x21, 0xfb, 0xbe, 0x4c,
++      0xad, 0xc5, 0xc9, 0x7e, 0xbc, 0xc3, 0x38, 0x87, 0xd8, 0xaa, 0x16, 0xd7,
++      0x84, 0x4e, 0x34, 0x03, 0xb7, 0xb4, 0x30, 0x96, 0xd1, 0xb8, 0x98, 0xb1,
++      0x0d, 0x71, 0xb0, 0xd8, 0x21, 0xe9, 0x82, 0x8d, 0xea, 0x8a, 0xef, 0xa3,
++      0xc2, 0x55, 0x62, 0x0a, 0x2f, 0x67, 0xf4, 0x18, 0x8c, 0x6b, 0xc8, 0x77,
++      0xe6, 0x73, 0x2b, 0x71, 0x4e, 0x07, 0xe2, 0x20, 0xe2, 0x5d, 0xe2, 0x25,
++      0x9f, 0x7e, 0x9f, 0x9e, 0x03, 0x46, 0x4d, 0x27, 0x32, 0xc6, 0x60, 0x75,
++      0xd0, 0xf0, 0x74, 0x82, 0xef, 0x0f, 0x68, 0x9f, 0xb6, 0x96, 0xde, 0xb7,
++      0xaf, 0xa1, 0x97, 0xb8, 0x2a, 0x21, 0x13, 0x90, 0x91, 0xd0, 0x09, 0xda,
++      0xd8, 0xe7, 0x46, 0x16, 0x67, 0x89, 0x1f, 0xfa, 0xc0, 0x17, 0xd2, 0x4b,
++      0xfe, 0x51, 0x97, 0x5b, 0x60, 0x1f, 0xba, 0x52, 0x65, 0xd4, 0x67, 0x7c,
++      0x3d, 0xae, 0xe2, 0xb2, 0x66, 0xa4, 0x08, 0x9e, 0x40, 0xeb, 0x38, 0x68,
++      0x1d, 0xd7, 0x31, 0xd9, 0x3e, 0xd8, 0xef, 0xd0, 0xb4, 0x4f, 0xeb, 0x8d,
++      0x21, 0x7f, 0x6d, 0x56, 0xd3, 0x5e, 0xef, 0x77, 0x3c, 0xfc, 0x75, 0x4f,
++      0x0f, 0x65, 0xc6, 0x2a, 0x10, 0xb3, 0x8d, 0x2b, 0xf9, 0x00, 0xf6, 0x33,
++      0xc4, 0xd3, 0xa5, 0x16, 0xdf, 0xff, 0x72, 0x3e, 0xf4, 0xff, 0xd4, 0x79,
++      0x7f, 0x0e, 0xcd, 0xd2, 0x79, 0x82, 0x73, 0x58, 0xa1, 0x3f, 0xc6, 0xdd,
++      0x8d, 0xfd, 0xb0, 0x9b, 0x79, 0x45, 0xeb, 0x4e, 0xd9, 0x5b, 0x7a, 0xa7,
++      0xa6, 0xbf, 0x19, 0xf4, 0x8f, 0x42, 0xb6, 0x6b, 0x36, 0x23, 0x5f, 0x19,
++      0x43, 0xde, 0xc3, 0x62, 0xe4, 0x71, 0xbe, 0x42, 0xfb, 0xa1, 0xe7, 0x13,
++      0xe5, 0x7c, 0xd6, 0xda, 0x96, 0xf5, 0xf8, 0xfa, 0x8e, 0x35, 0x7c, 0x15,
++      0xcd, 0xd7, 0x88, 0x34, 0x9c, 0x50, 0x71, 0x2d, 0xfa, 0x25, 0xaf, 0xe9,
++      0xbf, 0x9e, 0x1b, 0x99, 0x9c, 0x95, 0xbe, 0xb0, 0x90, 0xbe, 0x38, 0xcb,
++      0xfa, 0x1b, 0xa4, 0xcb, 0xb9, 0x88, 0x79, 0xe7, 0xb1, 0xde, 0xc6, 0xb4,
++      0x27, 0xdf, 0xe4, 0x6f, 0xbe, 0x12, 0x45, 0x2c, 0xcd, 0xb1, 0xc9, 0x33,
++      0xd2, 0x6f, 0x2a, 0x7a, 0x56, 0xf8, 0x0d, 0xfa, 0x3e, 0x56, 0x59, 0xcb,
++      0xdb, 0x7a, 0x3b, 0xe3, 0xc7, 0xec, 0xdf, 0x35, 0x3d, 0xbd, 0x58, 0x2f,
++      0x66, 0x6f, 0x86, 0x7d, 0x0c, 0xd1, 0x36, 0x82, 0xf7, 0xdc, 0x5f, 0x59,
++      0x0a, 0x11, 0x83, 0x5f, 0x28, 0x85, 0x95, 0xcd, 0xcb, 0x3a, 0x2d, 0x5a,
++      0x3f, 0x6e, 0xd3, 0xbe, 0x23, 0xac, 0x6c, 0xb6, 0x18, 0x26, 0x71, 0x09,
++      0xca, 0x90, 0x9f, 0x67, 0xde, 0xa7, 0xe3, 0xde, 0x5d, 0x61, 0xfb, 0x0f,
++      0x43, 0xbe, 0x4d, 0xa8, 0xd1, 0x55, 0x1f, 0x93, 0xbb, 0xc0, 0x72, 0xef,
++      0x84, 0xdc, 0xde, 0x89, 0xb8, 0x3b, 0x21, 0xf9, 0x14, 0xf5, 0x68, 0x40,
++      0xc5, 0x26, 0x86, 0xbd, 0x0f, 0x65, 0x4d, 0x28, 0x83, 0x13, 0x33, 0x31,
++      0x7f, 0xfb, 0x77, 0x65, 0x1c, 0x32, 0x9e, 0x4f, 0xf5, 0x82, 0x0e, 0xda,
++      0x60, 0x60, 0x1c, 0x3b, 0xc5, 0xb8, 0x1d, 0x7f, 0xfd, 0x61, 0x6f, 0x5e,
++      0xbb, 0x90, 0x47, 0x0c, 0x9f, 0xea, 0xd4, 0x75, 0x36, 0x08, 0xf7, 0x7f,
++      0xf2, 0x66, 0x0b, 0xd2, 0xee, 0x35, 0x75, 0xdf, 0x8f, 0xfc, 0x7b, 0x75,
++      0xff, 0x05, 0xbc, 0xdf, 0x86, 0xdf, 0x20, 0xca, 0x6e, 0x47, 0x99, 0x83,
++      0xb2, 0xf7, 0x20, 0xff, 0x7e, 0xbd, 0x1f, 0xe0, 0xb7, 0x69, 0x41, 0xfe,
++      0x31, 0xbc, 0x87, 0xad, 0x30, 0x5f, 0xc6, 0xfb, 0xf7, 0xe2, 0xf7, 0xee,
++      0x35, 0x75, 0xda, 0xd6, 0xe4, 0x3f, 0xb5, 0xc2, 0x83, 0x0b, 0xa5, 0x9f,
++      0x69, 0xbb, 0x46, 0x79, 0x66, 0xfe, 0x94, 0x7e, 0xf7, 0xce, 0xd0, 0xea,
++      0xf2, 0x1d, 0x7e, 0xbe, 0x6e, 0x0d, 0x3b, 0xb1, 0x86, 0x3e, 0xc6, 0x7c,
++      0xbb, 0xf6, 0x5d, 0x6f, 0xf7, 0xe2, 0xf4, 0x92, 0xdf, 0x8e, 0x7e, 0xed,
++      0xce, 0x35, 0x63, 0x3c, 0xdf, 0x50, 0xcb, 0x37, 0x07, 0x86, 0x4e, 0xb2,
++      0xec, 0x72, 0xc3, 0xea, 0x3a, 0x6f, 0xd6, 0xe5, 0x37, 0x06, 0x86, 0x94,
++      0x8f, 0xbb, 0xab, 0x71, 0x75, 0x9d, 0x64, 0x63, 0x6d, 0x1e, 0x35, 0x5b,
++      0x18, 0x4a, 0x2f, 0x53, 0x8e, 0xa1, 0x0b, 0xdf, 0x1a, 0xc9, 0x4e, 0xb9,
++      0xee, 0x84, 0xb3, 0x14, 0x0f, 0x0a, 0x7d, 0x10, 0xb1, 0x2a, 0xcb, 0x5f,
++      0x46, 0x39, 0xb0, 0x4c, 0x75, 0x54, 0x68, 0x93, 0xd6, 0xc7, 0xa4, 0x09,
++      0x8d, 0x49, 0x55, 0x36, 0x94, 0x55, 0x18, 0xf2, 0xf9, 0x11, 0x60, 0x1e,
++      0xfd, 0xfc, 0x02, 0x9e, 0x13, 0xf5, 0xb8, 0x17, 0xfd, 0x2e, 0x8d, 0x64,
++      0x67, 0xe9, 0xf3, 0x2e, 0x8e, 0xec, 0x99, 0xa5, 0xce, 0x5f, 0x82, 0xce,
++      0x07, 0x64, 0x52, 0xf9, 0x3f, 0xd2, 0xc1, 0x76, 0x4b, 0x23, 0x9d, 0x0b,
++      0x4c, 0x97, 0x47, 0xec, 0x85, 0xa0, 0xec, 0x8b, 0x79, 0x6d, 0x99, 0x4f,
++      0x2c, 0xf8, 0x3a, 0x10, 0x95, 0x70, 0x9a, 0x32, 0x69, 0xa5, 0x80, 0xbd,
++      0x31, 0x9f, 0x27, 0x47, 0x26, 0x6d, 0xca, 0xe7, 0x87, 0x1a, 0xa4, 0x25,
++      0x2a, 0x0d, 0xca, 0xde, 0x3c, 0xa5, 0xc7, 0xba, 0x84, 0xb1, 0x36, 0x29,
++      0x7d, 0xca, 0xda, 0xa1, 0x38, 0xc6, 0x39, 0x68, 0xd8, 0xbd, 0x18, 0x8f,
++      0x91, 0x72, 0x87, 0x4c, 0x54, 0xa9, 0x37, 0xdb, 0xc2, 0xb5, 0xf8, 0xf8,
++      0x3c, 0xda, 0xf9, 0x71, 0x19, 0xc7, 0x2b, 0x03, 0x97, 0x41, 0x96, 0xd3,
++      0x96, 0x99, 0x0d, 0xc2, 0xcf, 0xcf, 0xfa, 0x75, 0x48, 0xd3, 0xd9, 0x91,
++      0xe4, 0x42, 0x12, 0x7d, 0x75, 0xd0, 0x86, 0xc1, 0x76, 0x05, 0xf1, 0x63,
++      0xdf, 0x6c, 0x07, 0x5f, 0x34, 0x40, 0x3f, 0x72, 0x1e, 0x7e, 0xa4, 0x43,
++      0x0e, 0x95, 0x54, 0x1f, 0x09, 0xf6, 0x51, 0xd4, 0x6d, 0x3b, 0x17, 0x1a,
++      0x10, 0xdb, 0x24, 0xcd, 0x17, 0xa5, 0xd6, 0x76, 0x48, 0xbc, 0x76, 0x5e,
++      0xdf, 0x3f, 0x77, 0x33, 0xb1, 0x7a, 0xdd, 0x8f, 0x4a, 0x10, 0x74, 0xe4,
++      0xd0, 0x07, 0xc7, 0xaf, 0xf5, 0xed, 0xf7, 0x97, 0x34, 0x97, 0xaf, 0xe9,
++      0x6b, 0x93, 0x8e, 0xb9, 0xac, 0x44, 0xee, 0xd7, 0x1a, 0x5b, 0xc5, 0x00,
++      0x90, 0x07, 0x09, 0xe5, 0x7a, 0x60, 0x17, 0xab, 0x03, 0x5a, 0x46, 0x5e,
++      0x40, 0x59, 0x7d, 0x6c, 0xe3, 0xc9, 0x57, 0x01, 0x98, 0xae, 0x08, 0x3d,
++      0x0f, 0xa6, 0x33, 0xad, 0xde, 0x5e, 0xd3, 0xf5, 0xe2, 0x19, 0xc8, 0x0d,
++      0xfa, 0x2c, 0xae, 0xb4, 0xe5, 0x9c, 0x5e, 0x18, 0xb9, 0x34, 0x15, 0xc7,
++      0x9c, 0x3c, 0xbf, 0xe0, 0xf1, 0x9a, 0x3e, 0x27, 0x20, 0x8b, 0x76, 0x02,
++      0x71, 0x33, 0x7d, 0x7c, 0x42, 0x5e, 0xb2, 0x7d, 0xff, 0x43, 0x5f, 0x84,
++      0xfa, 0x55, 0xd2, 0x46, 0xda, 0xcf, 0x63, 0x6e, 0xae, 0xcc, 0x38, 0x9e,
++      0x0c, 0xf6, 0xc0, 0x8f, 0x7c, 0x23, 0x64, 0x1d, 0x66, 0x7c, 0x75, 0x25,
++      0x54, 0x3f, 0x1f, 0x1f, 0x2b, 0x3c, 0xaf, 0xf7, 0x7e, 0xcf, 0x6b, 0x79,
++      0x59, 0x82, 0xbc, 0xf4, 0x26, 0x4c, 0xe9, 0x06, 0xed, 0xa8, 0xd3, 0xd7,
++      0x85, 0x38, 0x87, 0x31, 0x74, 0x1c, 0xf4, 0x98, 0xb0, 0x1d, 0x9b, 0x34,
++      0x66, 0xff, 0x77, 0x61, 0xfa, 0xb6, 0x56, 0xb5, 0xaf, 0x7c, 0x5e, 0xc9,
++      0xb3, 0x27, 0xdf, 0x41, 0xfd, 0xde, 0x97, 0xa9, 0x20, 0x21, 0x8d, 0xd4,
++      0xf6, 0x4f, 0x59, 0xff, 0x39, 0x5d, 0xff, 0x59, 0xd4, 0x0f, 0x60, 0x4e,
++      0xae, 0xbb, 0x57, 0xd1, 0xfb, 0x1c, 0xf8, 0x1e, 0x94, 0xe2, 0x8a, 0xcc,
++      0x3f, 0x07, 0x99, 0xa7, 0x7c, 0x9f, 0x87, 0xbe, 0x82, 0xf8, 0x7b, 0x29,
++      0xf7, 0x65, 0x19, 0x3c, 0x9d, 0x6b, 0xe0, 0x5e, 0x67, 0xc2, 0x60, 0xec,
++      0x49, 0x99, 0xec, 0x90, 0xc7, 0x4b, 0x49, 0x73, 0xa2, 0x6e, 0x2d, 0x77,
++      0xac, 0x5a, 0x4b, 0xca, 0x80, 0xaa, 0x9f, 0x62, 0xfd, 0x72, 0x9d, 0x0c,
++      0xcc, 0xcf, 0x5e, 0xaf, 0x1d, 0x65, 0x80, 0xed, 0xd6, 0xc3, 0xe9, 0xdc,
++      0x1b, 0x74, 0xdd, 0x45, 0x87, 0xfb, 0xb8, 0x8d, 0x52, 0x50, 0x32, 0x16,
++      0x90, 0xa2, 0x43, 0xbd, 0xca, 0x26, 0x42, 0x62, 0x01, 0x2b, 0x7d, 0x10,
++      0x74, 0x66, 0x52, 0x61, 0xf1, 0xf6, 0x12, 0xc6, 0xb1, 0x06, 0x4b, 0xa6,
++      0xeb, 0x5e, 0xb2, 0x45, 0xca, 0x88, 0x3d, 0x17, 0x91, 0x16, 0x2b, 0xd0,
++      0xd9, 0x68, 0x08, 0x36, 0xc0, 0x97, 0xf1, 0x88, 0xcc, 0xa1, 0xce, 0x3c,
++      0xde, 0x3d, 0x5e, 0xf1, 0x25, 0xc6, 0x75, 0x0d, 0xf0, 0x68, 0x8f, 0xfd,
++      0xff, 0xdc, 0x7c, 0xac, 0xbe, 0xae, 0x8f, 0x89, 0x89, 0x65, 0x89, 0x4d,
++      0x89, 0x29, 0xf9, 0x8e, 0x38, 0xf1, 0x20, 0x68, 0xa1, 0xce, 0xb6, 0x48,
++      0x24, 0x6d, 0xc5, 0x87, 0xc5, 0xf7, 0xfd, 0x97, 0x21, 0x4b, 0x05, 0xb7,
++      0xd1, 0xee, 0x90, 0x67, 0x20, 0x37, 0xe7, 0x57, 0x70, 0x4c, 0x02, 0x72,
++      0x44, 0x3f, 0xea, 0xca, 0x39, 0xc7, 0x4e, 0x7c, 0x0e, 0xe9, 0xb7, 0x9d,
++      0xdf, 0x22, 0xdf, 0x9e, 0x10, 0xe9, 0x43, 0x2c, 0x04, 0xbb, 0x3e, 0xe3,
++      0x63, 0xfb, 0x16, 0xc6, 0x64, 0x5a, 0x96, 0xae, 0xa0, 0x4f, 0xcb, 0x34,
++      0x00, 0x6a, 0xef, 0x42, 0x3d, 0x4f, 0x37, 0xfc, 0xb2, 0x83, 0xa8, 0x4b,
++      0x1a, 0x18, 0x2f, 0x7f, 0x07, 0x3a, 0xeb, 0xba, 0xf7, 0x39, 0x8b, 0x75,
++      0xb6, 0xe6, 0x39, 0xac, 0xbf, 0x92, 0xf3, 0xfe, 0x56, 0xe1, 0xfe, 0xaa,
++      0xf4, 0xb5, 0xa9, 0x78, 0x8e, 0xcf, 0x90, 0xf7, 0x7e, 0x62, 0xa1, 0x84,
++      0xc2, 0x9a, 0xc4, 0x0d, 0xe7, 0xc1, 0xfb, 0x4f, 0x2a, 0x4c, 0x43, 0xfc,
++      0x06, 0xfa, 0x4b, 0xc4, 0x14, 0x1e, 0x96, 0xf6, 0x70, 0x1d, 0xb1, 0x45,
++      0x0a, 0x6b, 0xe3, 0xe3, 0x0b, 0xb6, 0x65, 0x3d, 0xb6, 0xad, 0x5f, 0x3f,
++      0xd6, 0xd9, 0x14, 0xc8, 0x1d, 0xa3, 0x3c, 0xd3, 0x3f, 0xb6, 0xca, 0xbe,
++      0x54, 0x23, 0xf8, 0xde, 0xa6, 0xfd, 0xf8, 0xfb, 0x80, 0xd9, 0x80, 0xbd,
++      0x4d, 0xcb, 0xa9, 0xd9, 0x9e, 0xf7, 0xa0, 0xec, 0x17, 0xe0, 0x3f, 0xcb,
++      0xf6, 0x37, 0x78, 0x7e, 0xf2, 0x61, 0xe8, 0xf2, 0xdc, 0x26, 0x6f, 0xef,
++      0x8a, 0xeb, 0xe0, 0xe3, 0x04, 0x1f, 0xf7, 0x99, 0x1a, 0xef, 0x73, 0x6d,
++      0xbc, 0x7d, 0x2e, 0x43, 0xd5, 0x65, 0xac, 0x55, 0x1f, 0x5b, 0x52, 0x87,
++      0x5d, 0xf7, 0x9c, 0xe3, 0xe3, 0xc8, 0xed, 0xf0, 0xa1, 0x21, 0xcd, 0xeb,
++      0x66, 0xf0, 0x9a, 0x18, 0x25, 0x22, 0x89, 0x36, 0x62, 0x8a, 0x07, 0x1b,
++      0x6a, 0x58, 0xe6, 0x6f, 0xdc, 0xa0, 0xcd, 0x78, 0x8f, 0x38, 0x86, 0xb4,
++      0x6f, 0xd7, 0x78, 0x86, 0xd8, 0xe6, 0x31, 0x8c, 0x11, 0x94, 0x44, 0x3b,
++      0xf3, 0x7f, 0xa9, 0xdb, 0xf0, 0xd9, 0x95, 0xee, 0xad, 0xf5, 0xf2, 0x3c,
++      0x00, 0x3a, 0x39, 0x1f, 0x7f, 0xef, 0xb5, 0x43, 0xd9, 0x93, 0x9a, 0x5c,
++      0xf8, 0x34, 0xf9, 0xe3, 0x92, 0xb6, 0xb8, 0xb4, 0x81, 0xb6, 0x7b, 0xe0,
++      0x53, 0xb6, 0xb6, 0xb1, 0x4f, 0x7f, 0xec, 0x7a, 0x9a, 0xea, 0xf1, 0x55,
++      0x02, 0x63, 0x34, 0xca, 0xd6, 0x76, 0xf2, 0xae, 0x43, 0xf9, 0x96, 0xda,
++      0x7a, 0xd0, 0xf7, 0x73, 0xec, 0xb5, 0xe5, 0xef, 0xad, 0xa3, 0x6b, 0x2d,
++      0xe6, 0xdb, 0x86, 0x77, 0xa4, 0xc9, 0x84, 0x5d, 0x72, 0x65, 0x87, 0xe3,
++      0xe3, 0xbb, 0x7a, 0x3a, 0x88, 0xf1, 0x48, 0x33, 0x69, 0xf0, 0x31, 0x39,
++      0x7f, 0x5c, 0x1b, 0xd2, 0x93, 0xd6, 0xe7, 0x44, 0xfb, 0xf5, 0xbc, 0x6e,
++      0xd3, 0x75, 0x92, 0x68, 0xfb, 0xc7, 0x98, 0x03, 0x9f, 0x39, 0x0f, 0x1f,
++      0x1b, 0x26, 0xbd, 0x7e, 0xa2, 0xeb, 0xc5, 0x00, 0xd4, 0x19, 0x9f, 0x4f,
++      0x6d, 0x7a, 0x8d, 0xb6, 0xaf, 0x19, 0xd7, 0x72, 0x56, 0xdb, 0x91, 0xf7,
++      0xd4, 0xcd, 0xaf, 0x4f, 0x0a, 0xf3, 0x94, 0x8b, 0x77, 0x21, 0xf5, 0x63,
++      0xa3, 0x7e, 0xf8, 0x91, 0x0c, 0x62, 0x21, 0xc6, 0x48, 0xd7, 0xc4, 0x47,
++      0x3c, 0x47, 0x1c, 0xcb, 0x23, 0x5e, 0x56, 0x7e, 0xc4, 0xf3, 0x91, 0xc8,
++      0xc3, 0x9e, 0x54, 0xef, 0xa5, 0x8c, 0x8d, 0x8d, 0x57, 0x9c, 0xb1, 0xbd,
++      0x95, 0xfe, 0x31, 0xc6, 0x11, 0x9e, 0xcc, 0xa1, 0x7e, 0x45, 0xc6, 0x0d,
++      0xb4, 0xcb, 0xaa, 0x76, 0x6a, 0x1f, 0x68, 0x9d, 0x7e, 0x84, 0xfa, 0x38,
++      0xee, 0x8d, 0x15, 0x19, 0xcb, 0xc1, 0x06, 0xcd, 0xcf, 0xc0, 0xc7, 0xd9,
++      0x56, 0x86, 0x72, 0xb9, 0xc7, 0xb1, 0x86, 0x95, 0xec, 0xc5, 0xac, 0x51,
++      0xae, 0x65, 0x79, 0xe6, 0x1d, 0xb0, 0xa1, 0xae, 0xdc, 0x0d, 0x5b, 0xf8,
++      0x10, 0x64, 0x55, 0xce, 0xc0, 0x10, 0x9e, 0x81, 0xf1, 0x3a, 0x13, 0x13,
++      0xe3, 0x78, 0x87, 0x84, 0x8f, 0xc4, 0x25, 0x74, 0x84, 0xb1, 0x58, 0xd2,
++      0xbc, 0x5b, 0x04, 0x3e, 0xf1, 0xc5, 0xdb, 0x0d, 0xb1, 0x06, 0x32, 0x92,
++      0x44, 0x3c, 0xd9, 0x6b, 0x96, 0x91, 0x16, 0x25, 0x99, 0x3a, 0x8d, 0xbe,
++      0xc2, 0x67, 0x50, 0x17, 0xed, 0x9a, 0x16, 0x13, 0xf8, 0xb5, 0x4b, 0x74,
++      0xd1, 0xd3, 0x95, 0xe8, 0xe2, 0xea, 0x3d, 0x94, 0xc1, 0x95, 0x3d, 0x14,
++      0xbe, 0x7f, 0x43, 0xef, 0xfd, 0x3c, 0xab, 0xe3, 0x1a, 0xca, 0x08, 0x7d,
++      0x9b, 0x8a, 0xcd, 0x60, 0xc7, 0x9f, 0x45, 0x2c, 0x6c, 0x4b, 0xae, 0x04,
++      0xcc, 0x9e, 0x76, 0xe5, 0x29, 0xa7, 0xe0, 0x66, 0xfb, 0x5d, 0xb9, 0xec,
++      0xd8, 0x85, 0xbc, 0x58, 0x6f, 0xd0, 0xde, 0xfd, 0x4f, 0xe7, 0xfd, 0xb2,
++      0xab, 0xd5, 0xda, 0x95, 0x09, 0x14, 0xdc, 0x66, 0x3b, 0x2a, 0x37, 0xa5,
++      0x0f, 0xca, 0x9e, 0x2d, 0x4b, 0x66, 0x50, 0x32, 0x37, 0x01, 0x17, 0xc6,
++      0xf3, 0xca, 0x56, 0xbd, 0xa6, 0xe2, 0xeb, 0x07, 0xba, 0x0e, 0xca, 0xc6,
++      0x2d, 0x96, 0x79, 0x35, 0x48, 0xcc, 0x76, 0x10, 0xb1, 0x80, 0x15, 0xcf,
++      0x05, 0x6d, 0x73, 0xa7, 0x58, 0xc3, 0x9f, 0x16, 0x9e, 0xdb, 0xda, 0xd2,
++      0x79, 0xc4, 0x8e, 0x7f, 0x22, 0xd0, 0xbd, 0xff, 0x13, 0x8c, 0xef, 0xce,
++      0x30, 0xef, 0x4a, 0x64, 0x8b, 0x89, 0xe7, 0x98, 0x74, 0x1e, 0x4f, 0x48,
++      0x12, 0x7c, 0xe9, 0x51, 0x3c, 0xe1, 0xf9, 0x51, 0x5c, 0xba, 0x8f, 0x10,
++      0x43, 0x29, 0xde, 0xf4, 0x80, 0x37, 0x29, 0xf0, 0x06, 0x31, 0x55, 0xaf,
++      0x79, 0x15, 0xe9, 0xb2, 0x24, 0x07, 0x7e, 0x00, 0xde, 0xf4, 0x80, 0x37,
++      0xdd, 0x67, 0x12, 0x68, 0x8f, 0x3e, 0x16, 0x3b, 0x91, 0x46, 0xe5, 0x83,
++      0x37, 0xb4, 0xe3, 0xd9, 0x96, 0xe4, 0x91, 0x08, 0xc6, 0x08, 0xc8, 0x8e,
++      0xae, 0x82, 0x0c, 0x6d, 0x41, 0x6c, 0x16, 0x3b, 0x28, 0x17, 0xe1, 0x87,
++      0x4a, 0x88, 0x11, 0x9e, 0x1a, 0xb0, 0x46, 0x97, 0x60, 0x4b, 0xab, 0xf7,
++      0xb8, 0xf2, 0xf2, 0x96, 0xbf, 0x70, 0xe3, 0x37, 0x58, 0xbb, 0x24, 0xd0,
++      0x2f, 0x93, 0x25, 0xe5, 0x1f, 0xe2, 0xd9, 0xa0, 0xc2, 0x65, 0x98, 0x63,
++      0x01, 0x3e, 0x86, 0xe7, 0xd1, 0x36, 0x6c, 0xfd, 0xa7, 0xe5, 0xa1, 0xb9,
++      0x09, 0xfc, 0x10, 0x6f, 0x4e, 0xb1, 0xee, 0x7e, 0xc4, 0x73, 0x0f, 0xcb,
++      0xbe, 0x29, 0x60, 0xc7, 0x34, 0xe8, 0xee, 0xb7, 0x11, 0xcf, 0xcd, 0x37,
++      0x4a, 0x0b, 0xca, 0xc0, 0xdb, 0xd1, 0xea, 0xda, 0x38, 0x6e, 0x09, 0xeb,
++      0x30, 0x20, 0x7f, 0x56, 0xed, 0x97, 0xaf, 0x55, 0xfb, 0xe4, 0x4f, 0xe0,
++      0x5b, 0xce, 0x57, 0x3b, 0xa0, 0x2b, 0x71, 0xac, 0x49, 0x1a, 0xeb, 0xe3,
++      0xc8, 0x73, 0xd5, 0x94, 0x3c, 0x0b, 0x5e, 0x3d, 0x83, 0xdf, 0x50, 0x29,
++      0x25, 0x3b, 0x4a, 0x7d, 0x7a, 0x8d, 0xb8, 0x3e, 0x36, 0xe8, 0xb1, 0x31,
++      0x77, 0xeb, 0xc9, 0x02, 0xf4, 0x6f, 0xbe, 0x6a, 0xbf, 0x5e, 0x96, 0x8f,
++      0x37, 0x72, 0x8f, 0xf7, 0xd4, 0x8a, 0x7f, 0x29, 0xb8, 0xa6, 0x6d, 0x1d,
++      0x1e, 0xc7, 0x3a, 0x94, 0xa1, 0xa7, 0xa3, 0x8a, 0xf7, 0x35, 0xdf, 0x53,
++      0xf6, 0x7c, 0x8f, 0x3f, 0xbf, 0x99, 0xbc, 0x7c, 0x5b, 0xb2, 0x47, 0x27,
++      0x65, 0xcf, 0x31, 0x57, 0x3e, 0xec, 0xb8, 0x90, 0x63, 0xda, 0xe2, 0x7e,
++      0xda, 0xf8, 0xc4, 0x78, 0xd0, 0x50, 0xb1, 0x94, 0x87, 0x5b, 0x7a, 0x37,
++      0x43, 0x67, 0x53, 0x19, 0x63, 0x42, 0x92, 0x47, 0x27, 0xa4, 0xf3, 0x28,
++      0x64, 0xc1, 0x61, 0x5f, 0x4b, 0xa6, 0x71, 0x8d, 0x3c, 0x70, 0x1c, 0x6b,
++      0x20, 0x27, 0xb6, 0xf9, 0xba, 0xa4, 0x30, 0xfe, 0x01, 0xe9, 0x42, 0x1b,
++      0x1b, 0x6d, 0xae, 0xaa, 0xb1, 0x9b, 0x31, 0x76, 0xa3, 0x1c, 0x8a, 0x59,
++      0x90, 0x35, 0xfa, 0xf0, 0xff, 0x25, 0xd9, 0x32, 0xd3, 0x9f, 0x4a, 0xf6,
++      0xd4, 0x47, 0x23, 0x12, 0xe5, 0x33, 0x4c, 0xc3, 0x09, 0x96, 0x77, 0x22,
++      0x65, 0xb9, 0x8d, 0x38, 0xfa, 0xe7, 0x92, 0x3d, 0xcb, 0xb1, 0x5f, 0x47,
++      0xf9, 0xcb, 0x92, 0x9d, 0xfe, 0x05, 0xf2, 0x17, 0x91, 0xbe, 0x81, 0x74,
++      0x54, 0x3a, 0xa7, 0x25, 0x90, 0x3d, 0xfb, 0x2d, 0xe4, 0x43, 0x48, 0x0f,
++      0xa1, 0xde, 0x76, 0xd0, 0xf7, 0xa7, 0xe8, 0x2f, 0x03, 0x9b, 0xf7, 0x3b,
++      0x9a, 0x7e, 0x96, 0xb3, 0x8c, 0xef, 0x0e, 0xc1, 0xa6, 0xfd, 0x67, 0xd8,
++      0x34, 0xfd, 0x3c, 0xcf, 0x3c, 0x6d, 0x1b, 0x9f, 0x27, 0xc0, 0x93, 0x03,
++      0xc8, 0xbb, 0xf2, 0xb0, 0x43, 0x7f, 0xb3, 0x4d, 0xc6, 0xcc, 0x82, 0x1b,
++      0x05, 0xae, 0x68, 0x86, 0x1e, 0x4c, 0x6c, 0x5d, 0x5f, 0x0f, 0x0e, 0x77,
++      0x1f, 0x94, 0xa6, 0x2d, 0xfe, 0xfc, 0xfd, 0xf9, 0xda, 0xe6, 0x4f, 0x14,
++      0x1f, 0xac, 0xc2, 0x27, 0x84, 0xf3, 0xb0, 0xe3, 0x5f, 0x30, 0xba, 0x77,
++      0x3d, 0x04, 0x3d, 0x30, 0xce, 0x32, 0xef, 0xe9, 0x81, 0x71, 0x16, 0xb6,
++      0xe1, 0x04, 0x62, 0xc4, 0x13, 0x1d, 0xd2, 0x38, 0x5d, 0xd3, 0x83, 0x86,
++      0xe9, 0x5f, 0xad, 0x07, 0x8d, 0x67, 0x51, 0xef, 0x2c, 0x79, 0x86, 0x3e,
++      0x4e, 0x91, 0x67, 0xed, 0x48, 0x3f, 0x8d, 0xb9, 0x92, 0xf6, 0x46, 0xd0,
++      0xee, 0xe1, 0xa2, 0xdb, 0x21, 0xef, 0x0f, 0x6c, 0x39, 0xa0, 0xcb, 0xff,
++      0xd2, 0x1d, 0x8e, 0x59, 0x73, 0x12, 0x20, 0x4f, 0x51, 0xb7, 0x4c, 0x1e,
++      0xde, 0xdc, 0x24, 0xd1, 0xfd, 0xd2, 0x49, 0xfe, 0x95, 0x77, 0x22, 0x5f,
++      0x70, 0xc3, 0x76, 0xb3, 0xe6, 0x27, 0x70, 0x52, 0x3f, 0xcb, 0x5f, 0x85,
++      0xcc, 0x10, 0xaf, 0xbe, 0x26, 0x7b, 0xa6, 0x5c, 0x19, 0x73, 0x38, 0xff,
++      0xef, 0x63, 0xfe, 0x99, 0x2d, 0x31, 0x59, 0x4a, 0xc4, 0xc0, 0x93, 0x79,
++      0xd8, 0xf6, 0x8b, 0xe2, 0xf1, 0x81, 0xe7, 0x02, 0x3b, 0xc4, 0x8e, 0x0f,
++      0x89, 0x9d, 0xfa, 0x01, 0xf8, 0x30, 0x04, 0xd9, 0xcf, 0x55, 0x29, 0x3b,
++      0xaf, 0xc8, 0x20, 0x64, 0xe2, 0x7b, 0x8e, 0x95, 0x02, 0x16, 0x82, 0xbd,
++      0xa0, 0x5c, 0x50, 0x26, 0x5a, 0x94, 0x4d, 0x3a, 0xe1, 0x58, 0x4f, 0x94,
++      0xe5, 0x56, 0x39, 0xd1, 0x46, 0xda, 0xf1, 0x6e, 0x5a, 0xf9, 0x8b, 0xd4,
++      0xb8, 0xd1, 0x05, 0x1b, 0x9d, 0x12, 0xb3, 0xbb, 0xd8, 0xe8, 0xdf, 0x21,
++      0xc9, 0x1f, 0x0d, 0xc8, 0x44, 0x37, 0xd7, 0x8a, 0xfd, 0x22, 0x5f, 0x2e,
++      0xb8, 0x21, 0xfb, 0x75, 0xf7, 0x64, 0x7b, 0x42, 0x3e, 0xd9, 0xbd, 0x22,
++      0x97, 0x73, 0x22, 0x9e, 0x5e, 0x0c, 0xaa, 0xf5, 0xf0, 0xe9, 0xf6, 0xe7,
++      0xe2, 0xbf, 0xeb, 0xab, 0x7b, 0xc7, 0xb9, 0x50, 0xd6, 0x57, 0x74, 0x27,
++      0x71, 0x2d, 0xad, 0xaf, 0x41, 0x9e, 0xac, 0x27, 0x8a, 0x72, 0x19, 0xb2,
++      0x07, 0x1e, 0x9e, 0x65, 0x4a, 0x1e, 0x4e, 0x40, 0xee, 0x5f, 0x95, 0x1d,
++      0x47, 0xa9, 0x33, 0xaf, 0x62, 0xae, 0xca, 0x96, 0xc0, 0x46, 0xb0, 0x3f,
++      0x57, 0x26, 0x9d, 0xae, 0xd4, 0x29, 0xb9, 0x35, 0xbe, 0x17, 0x31, 0xe7,
++      0xb8, 0xe9, 0xca, 0xa2, 0x53, 0x90, 0xc5, 0x01, 0xb4, 0x29, 0x7f, 0x1a,
++      0xbf, 0x4f, 0xe9, 0xb9, 0x3d, 0x0a, 0xbe, 0x5b, 0x89, 0x39, 0xe3, 0xf7,
++      0xc1, 0xf7, 0x87, 0x25, 0x39, 0xbd, 0x62, 0x6b, 0x20, 0x77, 0x9e, 0xad,
++      0x49, 0x9e, 0x35, 0xa5, 0x5c, 0xb2, 0xe5, 0x23, 0xb4, 0x21, 0x25, 0xce,
++      0x0b, 0x36, 0x86, 0x67, 0xec, 0x25, 0xd8, 0x99, 0x12, 0x6c, 0x0a, 0x6c,
++      0xc8, 0x9f, 0xa0, 0xfc, 0x59, 0xd4, 0x79, 0x06, 0xf1, 0xd3, 0x79, 0x60,
++      0xbf, 0x73, 0xc0, 0x14, 0x4f, 0x97, 0x32, 0x3a, 0x96, 0x55, 0xf3, 0x85,
++      0xcf, 0x52, 0xb1, 0x8f, 0x94, 0xe7, 0xd4, 0x7d, 0x1e, 0xb5, 0xb6, 0x59,
++      0x67, 0x13, 0x71, 0x16, 0x28, 0x13, 0x99, 0x9b, 0xf3, 0x79, 0x42, 0xdb,
++      0xc7, 0xf3, 0x19, 0xdf, 0x56, 0x36, 0xaf, 0xb1, 0x95, 0x22, 0x2f, 0x56,
++      0x3c, 0x3c, 0x49, 0x7c, 0x5c, 0x9c, 0x4a, 0xac, 0x9c, 0x63, 0x16, 0xe1,
++      0x37, 0x97, 0x11, 0x67, 0x44, 0xd2, 0xdf, 0x94, 0xc8, 0x71, 0xd7, 0xfd,
++      0x21, 0xfc, 0x66, 0x01, 0x6b, 0x62, 0x04, 0x50, 0xbe, 0xc0, 0x77, 0x94,
++      0x7b, 0xca, 0x76, 0x80, 0xe7, 0x19, 0xf2, 0x12, 0xca, 0xca, 0x2a, 0xfe,
++      0xfa, 0x16, 0xe8, 0xd1, 0xf4, 0xa9, 0x32, 0xd6, 0x6b, 0x94, 0xdc, 0x58,
++      0x0a, 0x31, 0x4e, 0xaf, 0xd9, 0x88, 0xf6, 0x73, 0x0b, 0x6c, 0x63, 0x0d,
++      0xf0, 0x3a, 0xd5, 0x4b, 0x0b, 0x2c, 0xef, 0x90, 0x8b, 0x88, 0x45, 0x49,
++      0x43, 0x79, 0x36, 0x2d, 0xde, 0xde, 0x31, 0xed, 0x15, 0x69, 0x45, 0x1e,
++      0xfc, 0xca, 0x96, 0xe8, 0x67, 0x43, 0x52, 0x88, 0x93, 0xd7, 0x71, 0x59,
++      0x9e, 0xfa, 0x4c, 0x13, 0xf7, 0x66, 0xb3, 0x36, 0x9f, 0xfd, 0xbd, 0x0e,
++      0xf3, 0x2d, 0xec, 0x75, 0x70, 0x7f, 0x23, 0x04, 0x5f, 0xa6, 0xf6, 0x3c,
++      0x90, 0x26, 0xea, 0xe2, 0x5f, 0xbe, 0xf7, 0xb0, 0x51, 0x0d, 0x3f, 0x12,
++      0x4f, 0x72, 0xbe, 0x56, 0x61, 0x09, 0xf6, 0xa3, 0x2d, 0x7d, 0x49, 0xee,
++      0x3d, 0xe1, 0xcd, 0xcf, 0x38, 0x25, 0xbc, 0x4b, 0x23, 0x57, 0x67, 0x2d,
++      0xe7, 0x0a, 0x30, 0x45, 0x2e, 0xe6, 0x60, 0xbd, 0x46, 0x9b, 0x60, 0xbf,
++      0x06, 0x32, 0xc6, 0x99, 0x26, 0x0f, 0x9f, 0x85, 0x64, 0x62, 0x8a, 0xe7,
++      0x9e, 0xb0, 0x6d, 0xc0, 0x90, 0xbf, 0x1b, 0xc2, 0x73, 0x85, 0x79, 0xc4,
++      0xa4, 0x5e, 0x3c, 0x8b, 0x67, 0xaf, 0x3f, 0xf2, 0xdc, 0x38, 0xc1, 0xb9,
++      0x07, 0xe4, 0x5e, 0xa0, 0x13, 0x41, 0xff, 0x9d, 0x7a, 0xac, 0xce, 0x53,
++      0x29, 0xee, 0x65, 0x4b, 0x12, 0xf6, 0x22, 0x8b, 0x58, 0x32, 0x17, 0xeb,
++      0xd0, 0xd8, 0x9c, 0xef, 0xd6, 0x62, 0x4f, 0x3f, 0xc6, 0x4b, 0xc9, 0xe7,
++      0x4b, 0x3e, 0xd6, 0x4b, 0xc1, 0xc7, 0x4a, 0x68, 0xb8, 0xc7, 0x95, 0x1f,
++      0x3a, 0xe4, 0x57, 0x1f, 0xf2, 0x8e, 0x1c, 0xae, 0xfe, 0xb2, 0xf3, 0xcd,
++      0xfa, 0xbf, 0x66, 0xd0, 0xc8, 0x1f, 0xe8, 0x03, 0x3e, 0x22, 0xed, 0x06,
++      0xfc, 0x79, 0x11, 0xb8, 0xcb, 0x38, 0xd3, 0xa1, 0xde, 0x19, 0xc0, 0x06,
++      0xe5, 0x29, 0xd8, 0xc6, 0x33, 0x3c, 0xf3, 0x85, 0x6d, 0x3b, 0x13, 0x96,
++      0xe2, 0x0c, 0xe5, 0x52, 0xda, 0x0c, 0xac, 0x17, 0xeb, 0x97, 0xa7, 0x3a,
++      0x90, 0x36, 0x23, 0x4d, 0xa8, 0x7e, 0xca, 0x53, 0xb6, 0x6a, 0x5f, 0x9e,
++      0x4a, 0xa9, 0x76, 0xe5, 0xa9, 0x3e, 0xa4, 0x8e, 0x34, 0x9c, 0x41, 0xe0,
++      0x74, 0xa6, 0x5b, 0x26, 0x4e, 0xc2, 0xbf, 0xf4, 0x1b, 0xea, 0xbe, 0xc4,
++      0x38, 0xfc, 0x4f, 0x08, 0x51, 0xd6, 0x15, 0x73, 0x00, 0x18, 0x6b, 0x1b,
++      0x30, 0xc8, 0x36, 0xb1, 0x8f, 0x73, 0xfe, 0xb4, 0xbd, 0xcb, 0xdc, 0xff,
++      0x8a, 0x3f, 0x28, 0x19, 0xd9, 0x37, 0xd3, 0x08, 0x7d, 0x0d, 0x99, 0x45,
++      0xe9, 0x32, 0x87, 0x90, 0xcf, 0xcf, 0x91, 0x6f, 0xf7, 0xab, 0xd8, 0x2d,
++      0xeb, 0xc4, 0xa2, 0x12, 0x4d, 0x63, 0x8c, 0xb7, 0xd2, 0xbe, 0x07, 0xf2,
++      0x67, 0xeb, 0x3e, 0xd2, 0xa0, 0xa7, 0x9e, 0x1f, 0x3c, 0xeb, 0xcd, 0xfc,
++      0x8a, 0xb3, 0x5e, 0xca, 0x35, 0xf9, 0x7b, 0xbf, 0x2c, 0xdb, 0x69, 0x79,
++      0xc9, 0x4e, 0xc9, 0x45, 0x7b, 0xab, 0xfc, 0x39, 0xfc, 0xf4, 0x25, 0x7b,
++      0xba, 0x89, 0x58, 0xa0, 0xac, 0xce, 0xcf, 0xfc, 0xb5, 0xb2, 0xf5, 0x3e,
++      0xfa, 0x8f, 0x64, 0x71, 0x8a, 0xd8, 0xd9, 0xdd, 0xbe, 0xc7, 0x29, 0xd0,
++      0x6f, 0x81, 0x06, 0x62, 0xb5, 0x02, 0xfc, 0xdf, 0x41, 0x19, 0x72, 0xe8,
++      0xf7, 0x94, 0x8f, 0x8a, 0x0f, 0x79, 0xfa, 0xec, 0xe4, 0x61, 0x57, 0x97,
++      0x67, 0xa0, 0x4f, 0x42, 0xf9, 0xc7, 0xf3, 0x1c, 0xd7, 0xdd, 0x96, 0x2f,
++      0x94, 0x38, 0xcf, 0xe2, 0xe6, 0xa8, 0x04, 0x65, 0x58, 0xe1, 0x85, 0x16,
++      0x79, 0x71, 0x61, 0x83, 0x18, 0xf0, 0x50, 0xc6, 0x2d, 0x61, 0x75, 0xd3,
++      0x84, 0xf1, 0xb7, 0xb4, 0xf2, 0xbe, 0xd8, 0x87, 0xc1, 0x1b, 0xee, 0x05,
++      0x60, 0x6e, 0xad, 0x9c, 0x89, 0x9f, 0xef, 0x83, 0x7e, 0xf1, 0x39, 0x20,
++      0x39, 0x3b, 0x86, 0x67, 0xa6, 0xd4, 0x39, 0xee, 0x93, 0x05, 0xc5, 0xc3,
++      0xdc, 0xe3, 0xea, 0x7d, 0xa3, 0x7d, 0x07, 0x70, 0x1d, 0xe5, 0x15, 0xe9,
++      0xa2, 0x37, 0x6e, 0x0e, 0x38, 0x2e, 0xdf, 0xd7, 0xa4, 0xce, 0xff, 0x0a,
++      0xd0, 0x85, 0x71, 0x55, 0xbf, 0x5f, 0x2e, 0x4d, 0xed, 0x8f, 0x7a, 0xfa,
++      0x31, 0xa0, 0x9f, 0xf9, 0x9e, 0xf1, 0x15, 0xf7, 0x4b, 0x5e, 0x19, 0x99,
++      0xb4, 0xbf, 0xa1, 0xf5, 0x47, 0x02, 0x77, 0xf7, 0x00, 0x87, 0x1e, 0x69,
++      0xc0, 0x5c, 0xac, 0x44, 0x22, 0x60, 0xb4, 0x1b, 0xc0, 0xf1, 0x43, 0xca,
++      0xe7, 0xf6, 0xa8, 0xfd, 0xe8, 0x53, 0xa9, 0x16, 0x29, 0x9b, 0xb6, 0xba,
++      0x17, 0xb7, 0x64, 0x6e, 0x21, 0xd6, 0xc7, 0xaf, 0x09, 0x65, 0x5d, 0x48,
++      0x1b, 0x91, 0xbe, 0x4b, 0x8a, 0xc7, 0xa6, 0xf5, 0x78, 0xe1, 0x35, 0xf9,
++      0x3e, 0x9d, 0x7e, 0x44, 0xc7, 0x53, 0x1c, 0x27, 0x2c, 0xf6, 0x17, 0x9b,
++      0xa5, 0xeb, 0x88, 0x09, 0x6c, 0x1b, 0x07, 0xd6, 0xed, 0x90, 0xd4, 0x91,
++      0x84, 0xdc, 0x72, 0xc4, 0xdf, 0x73, 0xfa, 0x0f, 0x23, 0x49, 0xb5, 0xc7,
++      0xf9, 0xdd, 0x11, 0x7b, 0x8e, 0xe9, 0x6b, 0xfa, 0xfe, 0xde, 0x15, 0x7d,
++      0xaf, 0xef, 0x47, 0x23, 0x3d, 0x2a, 0xfd, 0x6f, 0x23, 0x29, 0x95, 0xbe,
++      0x3e, 0x72, 0x4b, 0xc5, 0x8b, 0x8f, 0x8a, 0xf3, 0x29, 0xf9, 0x5c, 0x89,
++      0xf8, 0xb2, 0x1f, 0xd8, 0xd1, 0x81, 0x9d, 0xe9, 0x83, 0x9d, 0x49, 0xc1,
++      0xce, 0x0c, 0xd0, 0xce, 0xc0, 0x6e, 0xbf, 0x02, 0xbb, 0xed, 0xc8, 0xf7,
++      0x20, 0xaf, 0x4f, 0x3b, 0x8d, 0xc0, 0x85, 0xae, 0xeb, 0xcd, 0xd5, 0x7a,
++      0x62, 0x09, 0xeb, 0x5b, 0x3e, 0x2d, 0x91, 0x56, 0xd8, 0xa0, 0x2d, 0x27,
++      0x1a, 0x64, 0x3e, 0xe6, 0xba, 0x47, 0x1d, 0x5b, 0xae, 0xa2, 0x7e, 0xd6,
++      0xa6, 0x1e, 0xbf, 0x14, 0x65, 0x3c, 0x76, 0x75, 0x6a, 0x2b, 0x6c, 0x12,
++      0xe5, 0x3d, 0x22, 0xe5, 0xb1, 0xb8, 0x2c, 0x20, 0x3e, 0xab, 0xd5, 0x49,
++      0xe1, 0x99, 0xfa, 0xff, 0x5d, 0xd4, 0x4d, 0xc1, 0x3f, 0x98, 0xb2, 0xd8,
++      0x93, 0x90, 0x53, 0x3d, 0xd6, 0x40, 0xc2, 0xa0, 0xed, 0x4a, 0xc8, 0x1c,
++      0x62, 0xfd, 0x72, 0x89, 0xf5, 0x59, 0x0f, 0xfa, 0x59, 0xf2, 0xda, 0x4d,
++      0x96, 0x7c, 0x3b, 0xd1, 0xcf, 0x7d, 0xc8, 0x50, 0xae, 0xc7, 0xf3, 0x01,
++      0x86, 0xd1, 0x08, 0x39, 0x70, 0xc0, 0xff, 0x31, 0x94, 0xf7, 0xf3, 0xbe,
++      0x07, 0xca, 0x88, 0x85, 0x7e, 0x1c, 0x25, 0x46, 0xcc, 0x39, 0x63, 0x28,
++      0x63, 0x1b, 0x2b, 0x9e, 0x44, 0xf9, 0xa8, 0x24, 0xe3, 0x79, 0x75, 0xf7,
++      0xac, 0x1d, 0x65, 0xec, 0x23, 0xa8, 0xf7, 0x63, 0xfe, 0x8f, 0x92, 0xa3,
++      0xa0, 0xed, 0x97, 0xf7, 0xaa, 0xbd, 0x81, 0x8c, 0xe9, 0x40, 0x1f, 0x58,
++      0x96, 0x34, 0xd9, 0x2e, 0xe7, 0x38, 0xca, 0x16, 0xde, 0x57, 0xe1, 0x19,
++      0x5e, 0x44, 0xee, 0xad, 0x34, 0x4b, 0xae, 0xd2, 0x70, 0x1d, 0xfb, 0xef,
++      0xeb, 0xe4, 0x72, 0xdc, 0x14, 0xde, 0x83, 0xf0, 0xf4, 0x3c, 0xb4, 0x95,
++      0x3a, 0x31, 0xc0, 0x73, 0x03, 0xf8, 0x5b, 0xac, 0x05, 0xfc, 0xef, 0x39,
++      0xf8, 0xdf, 0xa7, 0x4b, 0x35, 0xfb, 0xe1, 0xf9, 0x5d, 0xda, 0x80, 0x27,
++      0xb1, 0x66, 0xa3, 0xc0, 0xfd, 0x3b, 0x11, 0x0f, 0x0c, 0x03, 0xfb, 0x0f,
++      0x62, 0xfd, 0xd2, 0x58, 0xbb, 0x31, 0xde, 0x17, 0xc2, 0x3a, 0x0e, 0xa8,
++      0x73, 0xe6, 0x19, 0x75, 0xe7, 0xe2, 0x47, 0xca, 0xf7, 0x3e, 0x5e, 0x32,
++      0xe0, 0x1f, 0x0a, 0xee, 0x66, 0xdb, 0x02, 0xfe, 0x5b, 0xd1, 0xe7, 0x81,
++      0x17, 0x61, 0x57, 0x7e, 0x06, 0xba, 0xce, 0xcf, 0xd0, 0x9f, 0xa3, 0x8e,
++      0x87, 0xb7, 0x1d, 0xee, 0x75, 0x41, 0x9f, 0x0f, 0x2f, 0xcb, 0x12, 0x70,
++      0x47, 0x86, 0x72, 0x8c, 0xf8, 0xc1, 0x7a, 0x7a, 0x4e, 0xba, 0x69, 0x03,
++      0xe7, 0xa8, 0x2b, 0xfd, 0xd3, 0x71, 0x60, 0x3d, 0x20, 0x79, 0x75, 0xae,
++      0x8a, 0xe7, 0xb3, 0x1b, 0xc5, 0x20, 0xde, 0x73, 0x6e, 0x40, 0x19, 0xed,
++      0x86, 0x8f, 0x91, 0x96, 0x06, 0xda, 0x24, 0xb3, 0xa5, 0x4d, 0xd9, 0x0e,
++      0xcb, 0x79, 0x09, 0xe3, 0xee, 0x90, 0x46, 0x60, 0xb8, 0x02, 0xc6, 0x38,
++      0x20, 0xff, 0xd5, 0xe1, 0x1e, 0x95, 0x17, 0xfb, 0x81, 0x96, 0x08, 0x78,
++      0xd6, 0xb4, 0xc7, 0x36, 0x23, 0x3b, 0xaa, 0xec, 0x3f, 0xa2, 0x30, 0x56,
++      0x4e, 0xd8, 0x3f, 0xfc, 0x04, 0xc6, 0x4c, 0x4e, 0x53, 0xf6, 0x7b, 0xb1,
++      0x6e, 0xbf, 0x0d, 0x0c, 0x44, 0xae, 0x7e, 0x75, 0x83, 0xa7, 0x2f, 0xa4,
++      0x7f, 0x89, 0x78, 0x82, 0x67, 0x00, 0x5e, 0x5c, 0xbe, 0x42, 0x5b, 0x3f,
++      0xe8, 0x9d, 0xdd, 0xe0, 0x9f, 0x25, 0x77, 0x4e, 0x7b, 0xfe, 0xba, 0xf3,
++      0x2c, 0x5a, 0x1d, 0x95, 0x76, 0x9e, 0x4a, 0x1b, 0x72, 0x8b, 0xdc, 0x19,
++      0xf2, 0xfa, 0x31, 0x4e, 0x98, 0x90, 0x55, 0xda, 0x81, 0x76, 0xc8, 0x39,
++      0xf3, 0xb4, 0x29, 0xb4, 0x09, 0x94, 0x05, 0x5b, 0x8a, 0x55, 0xd8, 0x84,
++      0x96, 0x0e, 0x99, 0x23, 0xcf, 0x4e, 0xd0, 0x4e, 0xfc, 0x48, 0x26, 0xd7,
++      0xd8, 0xca, 0x41, 0xf1, 0xe3, 0xda, 0x66, 0x09, 0xa7, 0x6d, 0xf3, 0x3e,
++      0x35, 0x47, 0xcf, 0x5e, 0xee, 0x23, 0xfe, 0x9c, 0xc9, 0x58, 0x6d, 0xa2,
++      0xb1, 0xa7, 0xc2, 0x4f, 0xdf, 0xc7, 0x5c, 0xd9, 0x87, 0xe2, 0xd3, 0xc0,
++      0xa0, 0x17, 0x0b, 0xa8, 0x3d, 0x3f, 0xe0, 0xe0, 0xf8, 0xcf, 0x60, 0x6b,
++      0x73, 0xc4, 0x25, 0xe0, 0x73, 0xe7, 0x51, 0xca, 0xd1, 0x66, 0xda, 0x32,
++      0xe0, 0xbc, 0x14, 0xed, 0xb5, 0x2c, 0x4c, 0x03, 0x73, 0x19, 0x77, 0x48,
++      0x9e, 0xf2, 0xca, 0xbb, 0x0a, 0x0b, 0x86, 0x4c, 0xce, 0xb6, 0x48, 0xd7,
++      0x09, 0xee, 0xaf, 0x9e, 0x8a, 0x4a, 0x0b, 0xf7, 0x58, 0xe9, 0x83, 0xfa,
++      0x25, 0x87, 0xf2, 0xce, 0x13, 0x41, 0xb5, 0x1f, 0x36, 0x67, 0x90, 0x47,
++      0x7d, 0xb0, 0x07, 0x56, 0x6a, 0xc9, 0xd8, 0xd6, 0xe4, 0x61, 0x48, 0xc8,
++      0x52, 0x09, 0x32, 0x56, 0x82, 0x8c, 0x95, 0x20, 0x63, 0x25, 0xc8, 0x18,
++      0xb0, 0xdf, 0x79, 0xe8, 0xdf, 0xb9, 0xd2, 0x80, 0xf6, 0xeb, 0xbb, 0x94,
++      0x5f, 0x3f, 0x54, 0x7a, 0xc5, 0x65, 0xfa, 0xac, 0x8a, 0x4d, 0xfb, 0x20,
++      0x83, 0x8c, 0x45, 0xfd, 0x18, 0xf5, 0x15, 0x79, 0x72, 0xe6, 0x55, 0x39,
++      0x35, 0x53, 0xc3, 0x81, 0x13, 0x25, 0x57, 0x5e, 0x72, 0x10, 0x7f, 0xce,
++      0x13, 0x53, 0x65, 0x5a, 0x1b, 0x15, 0xb6, 0x3a, 0x28, 0x79, 0x85, 0x93,
++      0x95, 0x1f, 0x01, 0xbe, 0x52, 0xb8, 0x90, 0xba, 0x29, 0x6d, 0x5b, 0x2e,
++      0xcb, 0x39, 0xf8, 0xf1, 0x85, 0xea, 0x6b, 0xf2, 0x8c, 0xc2, 0xe3, 0xe4,
++      0xc3, 0x3b, 0xe5, 0xa7, 0xa6, 0x77, 0x9e, 0x7f, 0x0a, 0x58, 0x63, 0xa1,
++      0x87, 0xb6, 0x23, 0x04, 0x5f, 0x60, 0x15, 0x3a, 0xa1, 0xd7, 0xfb, 0x8d,
++      0x1b, 0x81, 0x69, 0xf8, 0x7e, 0xa3, 0xbc, 0x38, 0x53, 0xa8, 0x93, 0x09,
++      0xda, 0x07, 0xeb, 0xb0, 0x18, 0xf4, 0x53, 0xf4, 0x9b, 0x9c, 0x2f, 0xfd,
++      0xd4, 0x4f, 0x37, 0xf0, 0x0e, 0x57, 0xf9, 0x58, 0x6c, 0x03, 0xf7, 0x1b,
++      0x63, 0x36, 0x79, 0x7a, 0x59, 0xf6, 0x57, 0x58, 0xf6, 0x2a, 0xd6, 0x87,
++      0xe9, 0x0f, 0xdc, 0x7b, 0x63, 0x1c, 0x8f, 0xfd, 0x02, 0x37, 0xb5, 0x63,
++      0xae, 0xa5, 0x8f, 0x68, 0xcc, 0xdd, 0xa7, 0x70, 0xf4, 0xb5, 0x78, 0x99,
++      0x7c, 0x72, 0xc0, 0xa7, 0xcb, 0x6a, 0x3f, 0x70, 0x9d, 0x7d, 0xe2, 0x27,
++      0xa0, 0x57, 0x85, 0x2b, 0xc2, 0x3d, 0x4b, 0xee, 0xe7, 0x72, 0xaf, 0xb8,
++      0xde, 0x62, 0xa8, 0x7b, 0x03, 0x72, 0x0f, 0xec, 0xcb, 0xbd, 0xb0, 0x2f,
++      0xf7, 0x5d, 0x73, 0x07, 0xda, 0x3f, 0x03, 0xe8, 0x2a, 0x04, 0x8d, 0x0e,
++      0x19, 0xad, 0xd4, 0xb7, 0xe5, 0x3e, 0xee, 0x7a, 0xfb, 0xb6, 0xdc, 0xd3,
++      0x4d, 0xad, 0xd9, 0x0b, 0xa4, 0x6c, 0xb8, 0x72, 0xc9, 0xe1, 0xbe, 0x9b,
++      0x7f, 0x6f, 0x7e, 0x3d, 0xfc, 0x15, 0x68, 0xf6, 0xf7, 0x9c, 0x43, 0xe9,
++      0x2b, 0xc2, 0xfb, 0xf3, 0xc5, 0x29, 0xe2, 0x81, 0x98, 0xba, 0x17, 0x63,
++      0xa8, 0x7d, 0x3e, 0xaf, 0x6d, 0x71, 0x4a, 0x9d, 0x31, 0x15, 0xb8, 0x77,
++      0x6d, 0x6e, 0xb5, 0xcc, 0xd1, 0xa0, 0x77, 0x1f, 0x93, 0xba, 0xec, 0xd9,
++      0x32, 0xc8, 0x62, 0xb5, 0x76, 0xcf, 0x71, 0x50, 0xd9, 0x8b, 0x2b, 0xd0,
++      0x01, 0xae, 0x17, 0xe2, 0x05, 0xe8, 0xc9, 0x04, 0xec, 0x53, 0x5e, 0xf5,
++      0x17, 0xa1, 0x5c, 0x64, 0xb2, 0x41, 0x43, 0xc2, 0xc7, 0x19, 0x0b, 0x79,
++      0x7b, 0x2d, 0xb9, 0xa0, 0xa5, 0xec, 0x37, 0x68, 0x07, 0x3e, 0xa3, 0x7e,
++      0x26, 0xc6, 0x1b, 0xd3, 0x0d, 0xf0, 0xab, 0x58, 0xbf, 0x2a, 0xf7, 0x04,
++      0xa0, 0xbb, 0x8b, 0xdf, 0x91, 0x7d, 0xb3, 0xdd, 0xcd, 0x9e, 0xfc, 0x73,
++      0x1f, 0x99, 0xf3, 0xf3, 0x69, 0x58, 0xdd, 0xb7, 0x71, 0x5c, 0x22, 0x51,
++      0xf8, 0xb4, 0x0f, 0x20, 0xce, 0xd8, 0x01, 0x59, 0x59, 0x8a, 0xb1, 0x5f,
++      0x4f, 0x67, 0x26, 0x4b, 0xec, 0xfb, 0x3b, 0x32, 0x34, 0x5b, 0x6a, 0xa6,
++      0x2f, 0x59, 0x84, 0x1d, 0x58, 0x36, 0xe9, 0x43, 0xc7, 0xe0, 0xe3, 0xda,
++      0xe5, 0xfb, 0xb3, 0xf4, 0x8f, 0x49, 0xf3, 0x94, 0xf4, 0xc6, 0x4f, 0x81,
++      0xa6, 0xcf, 0x3b, 0x21, 0xc6, 0x68, 0xee, 0x20, 0xca, 0xfe, 0x5c, 0x92,
++      0x66, 0x67, 0x80, 0xcf, 0xbd, 0xe6, 0x17, 0x80, 0x61, 0x33, 0x66, 0xd2,
++      0xbc, 0x35, 0x40, 0x39, 0x42, 0xcc, 0xbd, 0x58, 0xa3, 0xf3, 0x07, 0xb3,
++      0x2a, 0x4e, 0x52, 0x76, 0x66, 0xd1, 0xe1, 0x78, 0xa0, 0x5b, 0xd9, 0xac,
++      0x5b, 0x61, 0x4f, 0x22, 0xfa, 0xfc, 0x0d, 0x6d, 0x88, 0x6d, 0x9c, 0x90,
++      0xce, 0x3f, 0x2a, 0xd9, 0x93, 0x31, 0xd8, 0x33, 0xf6, 0xe5, 0xc7, 0x0e,
++      0xf4, 0x91, 0x3e, 0xde, 0xa6, 0xbf, 0xbb, 0x03, 0x7e, 0xef, 0x66, 0x45,
++      0xcf, 0xb0, 0xd3, 0x27, 0x13, 0xc7, 0x38, 0x76, 0x0f, 0x6c, 0x79, 0x5c,
++      0xc9, 0x6d, 0xb1, 0xb4, 0x1c, 0x8f, 0xc0, 0x26, 0x47, 0xb6, 0x90, 0x9f,
++      0xef, 0x93, 0xbb, 0xec, 0x31, 0xb9, 0x1b, 0xb2, 0x33, 0x68, 0x3b, 0x32,
++      0x84, 0xb5, 0xd8, 0x61, 0xc3, 0xef, 0x28, 0x0c, 0xdd, 0x88, 0xb8, 0x8b,
++      0x63, 0xb7, 0xeb, 0xfb, 0x17, 0x1e, 0x7e, 0xfc, 0x4a, 0xd5, 0xe3, 0x51,
++      0x76, 0xf6, 0x49, 0xc5, 0x9b, 0x61, 0x67, 0x9b, 0xf6, 0xb3, 0x2d, 0x92,
++      0x53, 0xf5, 0xb6, 0x29, 0x7f, 0x5c, 0x5c, 0xb8, 0x1f, 0x29, 0x7c, 0xf3,
++      0x02, 0xec, 0x0d, 0x30, 0x77, 0xb1, 0xb2, 0x15, 0x79, 0xf8, 0xd0, 0x85,
++      0x34, 0xd2, 0xf7, 0x21, 0x65, 0xdd, 0x07, 0x9a, 0xbd, 0xbd, 0xdc, 0xb5,
++      0xf7, 0xb8, 0x24, 0xf0, 0x01, 0x85, 0x4b, 0xaf, 0xa8, 0x3b, 0x80, 0x88,
++      0xa1, 0x47, 0xb2, 0xb0, 0x2b, 0xcd, 0xc0, 0x40, 0x53, 0xc7, 0xad, 0xd4,
++      0x50, 0x60, 0xbb, 0x7c, 0x10, 0xb1, 0x7c, 0xd9, 0xe1, 0x5a, 0x6e, 0x95,
++      0x07, 0xdf, 0x4b, 0x19, 0xd9, 0x2e, 0x7b, 0xde, 0x1b, 0x90, 0x3d, 0x7d,
++      0x56, 0x86, 0x74, 0xdf, 0xf2, 0x2e, 0x3f, 0x9e, 0xee, 0x1a, 0x4e, 0x06,
++      0xfa, 0xe5, 0x0b, 0x90, 0xb1, 0x02, 0xe4, 0x6b, 0xa8, 0x4a, 0x9e, 0xd3,
++      0xde, 0xd3, 0xce, 0xa7, 0x80, 0x95, 0x7d, 0xec, 0x67, 0xcb, 0x54, 0xb5,
++      0x41, 0x12, 0x37, 0x70, 0x3f, 0x39, 0xe1, 0x9d, 0x71, 0xdc, 0x40, 0x99,
++      0x40, 0x0c, 0x72, 0x83, 0xa7, 0x9f, 0xea, 0xee, 0xdd, 0x0d, 0x9e, 0x5f,
++      0x41, 0xfc, 0xeb, 0x12, 0xe7, 0x79, 0x77, 0x0d, 0xbe, 0xa1, 0x6d, 0x69,
++      0x68, 0xe3, 0x0a, 0xbe, 0x6b, 0x61, 0xfc, 0xf0, 0x87, 0xcd, 0xb5, 0x6f,
++      0x07, 0xd6, 0xca, 0xa2, 0xbf, 0xef, 0x36, 0x87, 0x39, 0xd3, 0xa7, 0x5b,
++      0x26, 0x6d, 0x61, 0xab, 0xbd, 0x4b, 0xfe, 0x0c, 0xfe, 0xfd, 0x6b, 0x2b,
++      0xfe, 0x7d, 0x37, 0xf8, 0xb1, 0x16, 0x03, 0xd8, 0xe6, 0x3d, 0x98, 0xcb,
++      0x30, 0xd6, 0xf3, 0x6e, 0xfc, 0xee, 0x2a, 0xad, 0xda, 0xc7, 0x9b, 0x29,
++      0x00, 0x4f, 0x36, 0xd8, 0xec, 0x6f, 0xd5, 0x7e, 0x5e, 0x21, 0x2f, 0x2b,
++      0x7b, 0x85, 0x03, 0x57, 0x85, 0x7e, 0xef, 0x75, 0x09, 0x77, 0xdb, 0xaf,
++      0x77, 0x06, 0xec, 0xe7, 0x8d, 0x00, 0xcf, 0xc1, 0x1d, 0x39, 0x5d, 0x25,
++      0x0e, 0xbb, 0x28, 0xc6, 0x59, 0x62, 0xb0, 0x97, 0xd5, 0x1e, 0x54, 0xb9,
++      0xf4, 0x2d, 0xa4, 0xa8, 0x0f, 0xfb, 0x18, 0xf4, 0xf6, 0x29, 0x14, 0x56,
++      0xa1, 0x9d, 0xbd, 0x1b, 0xeb, 0x30, 0x81, 0x5f, 0xe7, 0x96, 0x5b, 0xa1,
++      0xbf, 0x94, 0x53, 0xee, 0x7d, 0x75, 0x9b, 0x5b, 0x02, 0x7c, 0xb7, 0xde,
++      0x3e, 0xd8, 0xb7, 0x25, 0x74, 0x14, 0xbe, 0xce, 0xa0, 0x7d, 0xe0, 0x3c,
++      0xe8, 0x27, 0x4d, 0x99, 0x3f, 0x46, 0x5d, 0x5f, 0xaf, 0xbe, 0x5f, 0xd7,
++      0x9f, 0x8b, 0xf2, 0x1b, 0x99, 0x3c, 0xf7, 0x38, 0x4b, 0x5c, 0x03, 0x07,
++      0x6b, 0xe0, 0xca, 0x71, 0xa7, 0x95, 0x36, 0x5d, 0x82, 0xc7, 0x5d, 0x19,
++      0x54, 0xd8, 0xb5, 0x17, 0x98, 0x6b, 0xa3, 0xc6, 0x0d, 0x31, 0x09, 0x1d,
++      0xef, 0x90, 0x46, 0xe0, 0xea, 0x86, 0x23, 0xf4, 0x91, 0xc9, 0xc4, 0x20,
++      0x84, 0x20, 0xa4, 0xee, 0x93, 0x5a, 0x03, 0xdf, 0x97, 0xde, 0xc4, 0xf7,
++      0x85, 0x78, 0xe9, 0x51, 0xac, 0x9f, 0xe5, 0x5c, 0x5c, 0xa7, 0x7e, 0xb1,
++      0x56, 0x1f, 0x72, 0xc4, 0xbd, 0x35, 0xb6, 0xe1, 0x5e, 0x5b, 0x72, 0xe0,
++      0x7b, 0xdc, 0x63, 0x43, 0xac, 0xd9, 0x70, 0xc6, 0xa3, 0xc1, 0x58, 0x6c,
++      0x93, 0xf2, 0x49, 0xea, 0x28, 0xf7, 0x59, 0x4c, 0x2f, 0x4e, 0x2d, 0x31,
++      0x5e, 0xe5, 0xfb, 0x84, 0x7e, 0xdf, 0xa9, 0xdf, 0x33, 0x1e, 0x2d, 0xb8,
++      0x0d, 0xe0, 0xe9, 0x0e, 0xd8, 0xcf, 0xfb, 0xb7, 0xda, 0x0a, 0x37, 0xdc,
++      0xbf, 0xb2, 0x66, 0x3b, 0xd5, 0xdd, 0xa2, 0x72, 0xe9, 0xa0, 0xd8, 0x5b,
++      0x96, 0x52, 0x21, 0x19, 0xc5, 0x5a, 0x30, 0x9f, 0x21, 0x3d, 0xa9, 0x43,
++      0xb2, 0x5f, 0xad, 0x4d, 0xf9, 0x98, 0x75, 0x38, 0x11, 0x98, 0x10, 0xa3,
++      0xcc, 0xe7, 0x4f, 0x23, 0x3d, 0x04, 0xbc, 0xe3, 0xed, 0x5d, 0x1a, 0xe5,
++      0xd5, 0xbc, 0x04, 0xc6, 0x30, 0x77, 0xac, 0xda, 0xc7, 0xaa, 0xed, 0x71,
++      0xf1, 0xfd, 0xa0, 0x7a, 0x9f, 0x5a, 0xb5, 0xcf, 0x95, 0x33, 0x88, 0x65,
++      0xfc, 0xf7, 0x5c, 0x0b, 0xae, 0x17, 0x7c, 0xf1, 0x31, 0x7f, 0xcf, 0xab,
++      0x45, 0xaf, 0x0b, 0xd7, 0x67, 0x4a, 0xce, 0x99, 0xd6, 0x30, 0xe5, 0xef,
++      0xb6, 0xad, 0x37, 0xc9, 0x78, 0x3b, 0xf7, 0xdb, 0xea, 0x69, 0x58, 0xbb,
++      0x8f, 0x56, 0x3f, 0xfe, 0xda, 0xfd, 0x37, 0x8e, 0xed, 0xed, 0xb1, 0x65,
++      0x57, 0xed, 0xb1, 0xd5, 0x8f, 0xc7, 0xb1, 0x36, 0x22, 0x7e, 0x2a, 0xb8,
++      0x31, 0x9b, 0x6b, 0xd4, 0x95, 0x98, 0x65, 0xfe, 0xcb, 0x06, 0xd6, 0x31,
++      0x06, 0x3f, 0xc2, 0xb5, 0xf4, 0xcf, 0x9e, 0xb9, 0xa6, 0xc9, 0xc4, 0x21,
++      0x6f, 0x3d, 0x07, 0xbc, 0x75, 0xf7, 0xd6, 0xff, 0xe2, 0xca, 0x3a, 0xd2,
++      0x3f, 0x70, 0x1d, 0xdb, 0x45, 0x60, 0x67, 0x8d, 0x23, 0x5c, 0x43, 0xa6,
++      0x5c, 0x43, 0xbe, 0xe3, 0x1a, 0x76, 0xea, 0x77, 0x5c, 0x3f, 0xe0, 0xb4,
++      0x2f, 0x02, 0x63, 0x38, 0x59, 0xf5, 0x1d, 0x54, 0x67, 0xb7, 0xaf, 0x8b,
++      0x29, 0x79, 0x66, 0x3e, 0x2a, 0x66, 0xda, 0x9b, 0xd7, 0xd8, 0xaa, 0xfd,
++      0x76, 0x9e, 0x5f, 0xf5, 0x11, 0x7b, 0xfa, 0xf3, 0x8a, 0x73, 0x5e, 0xfb,
++      0xe5, 0xb2, 0xe4, 0xa7, 0x42, 0x88, 0x01, 0x53, 0xc0, 0x39, 0x7d, 0xb0,
++      0xb7, 0xdc, 0x1f, 0x45, 0x59, 0x85, 0x78, 0x85, 0xbe, 0x2e, 0x05, 0x5d,
++      0xa1, 0x0d, 0x26, 0x1e, 0x79, 0x55, 0x72, 0x73, 0xbe, 0x8d, 0x41, 0xff,
++      0x86, 0xdf, 0x3f, 0xf9, 0x9c, 0xb9, 0x65, 0xb3, 0x2c, 0x25, 0x36, 0x8b,
++      0x95, 0x58, 0x90, 0xda, 0xba, 0x8e, 0xad, 0xcf, 0x77, 0xe7, 0xfe, 0x60,
++      0x4d, 0x36, 0xc6, 0xd6, 0x59, 0xfb, 0xbd, 0xe2, 0xbf, 0xf7, 0xd7, 0x7e,
++      0xdd, 0x75, 0x28, 0xbc, 0x22, 0x5c, 0x0b, 0xf2, 0x80, 0x78, 0x38, 0x2c,
++      0x9f, 0x8a, 0x51, 0x1f, 0x0b, 0xea, 0x7c, 0x33, 0x69, 0x74, 0x2b, 0x9b,
++      0x31, 0xe8, 0x78, 0xf2, 0x5a, 0xc0, 0x38, 0x91, 0xae, 0x7f, 0xe1, 0x0e,
++      0xc6, 0x10, 0xe7, 0x76, 0xd1, 0xbe, 0xf8, 0x3a, 0x1d, 0x55, 0x3a, 0xfd,
++      0x79, 0x27, 0x20, 0x45, 0x3b, 0x20, 0x13, 0xf6, 0x41, 0x85, 0xf1, 0x3f,
++      0x84, 0xbe, 0x1e, 0xd4, 0x7d, 0x4d, 0x48, 0xb7, 0xb6, 0x3f, 0x07, 0x20,
++      0xe7, 0xae, 0xdc, 0xe7, 0x6c, 0x95, 0xdb, 0x5a, 0xa9, 0x03, 0xfe, 0xfc,
++      0x0f, 0x4a, 0xd7, 0xd6, 0xa5, 0x04, 0x22, 0x83, 0x5b, 0xc2, 0x2b, 0x3c,
++      0xa0, 0x9e, 0xf9, 0xf2, 0xed, 0xf1, 0xc1, 0x9b, 0xff, 0xaa, 0xb9, 0xea,
++      0x79, 0x72, 0xce, 0xac, 0xc7, 0xb9, 0x7a, 0x58, 0xbe, 0x36, 0x57, 0xbf,
++      0x7e, 0x33, 0x64, 0xc9, 0x4a, 0x48, 0xa0, 0x9e, 0x37, 0x2b, 0x36, 0x6a,
++      0x98, 0x7b, 0x24, 0x4b, 0xa6, 0x95, 0x4a, 0x04, 0xfc, 0xbd, 0x68, 0x0f,
++      0xeb, 0x76, 0x02, 0x87, 0xdb, 0xdd, 0xdd, 0xa9, 0xbc, 0xda, 0x23, 0x35,
++      0xd4, 0xbc, 0x26, 0x80, 0xc9, 0xe6, 0x9d, 0x57, 0xdc, 0x4f, 0x02, 0xb3,
++      0x8e, 0xcb, 0xc3, 0x12, 0x5c, 0xb5, 0x97, 0x8b, 0xfc, 0x59, 0xee, 0xe7,
++      0x5a, 0x89, 0x0c, 0xd6, 0xf8, 0xc3, 0x88, 0xe1, 0xcb, 0xb0, 0xfb, 0x1f,
++      0xa1, 0x6f, 0x28, 0xc1, 0x5f, 0x00, 0x97, 0x7c, 0xed, 0xba, 0x18, 0x7e,
++      0xbc, 0x6e, 0x2f, 0xd7, 0xc3, 0xa7, 0xe7, 0x14, 0x26, 0x25, 0x6e, 0x3f,
++      0x1c, 0xb8, 0xa7, 0x27, 0x88, 0x38, 0xa3, 0xe0, 0x46, 0x6c, 0xe2, 0xb8,
++      0x83, 0x72, 0x17, 0xd6, 0xe7, 0xf4, 0x7c, 0x21, 0xb0, 0xa3, 0xe4, 0xcb,
++      0x2a, 0xe2, 0xca, 0xaa, 0x95, 0x5a, 0x06, 0x3f, 0x9e, 0xd4, 0x98, 0x8f,
++      0xe7, 0x35, 0x65, 0x1d, 0xb3, 0x70, 0x6f, 0xa8, 0x58, 0x3d, 0x28, 0x93,
++      0x0e, 0xf7, 0x76, 0xba, 0xa4, 0x18, 0xcb, 0xdc, 0xd4, 0xb8, 0xc2, 0x23,
++      0xcb, 0x44, 0xcc, 0x97, 0xa2, 0xfd, 0x2e, 0xeb, 0xf3, 0x8e, 0x27, 0x95,
++      0x7c, 0xf9, 0xfb, 0xc2, 0x8c, 0x8f, 0x78, 0x5e, 0xd5, 0x65, 0x0e, 0xf3,
++      0x79, 0x8e, 0x32, 0xa0, 0x62, 0x26, 0xf0, 0xf2, 0x21, 0xc9, 0x8c, 0x26,
++      0x14, 0x6e, 0x79, 0xbc, 0x44, 0x7d, 0x21, 0xfe, 0xbf, 0x0c, 0xec, 0x1f,
++      0xc2, 0x9a, 0x31, 0x0e, 0xe0, 0xd8, 0xd4, 0x0b, 0x94, 0x55, 0xcc, 0x5f,
++      0xa2, 0x17, 0xdb, 0x37, 0x11, 0x63, 0x5c, 0x28, 0x7d, 0x5c, 0xf1, 0x6f,
++      0x49, 0xfc, 0xbd, 0x73, 0x85, 0x05, 0x0b, 0xd9, 0x60, 0x40, 0x92, 0x47,
++      0x3f, 0x03, 0x19, 0x1a, 0x41, 0x8c, 0xc4, 0x7a, 0xa2, 0xce, 0xaf, 0x06,
++      0x81, 0xb9, 0x0c, 0xfb, 0x46, 0x29, 0x9a, 0x61, 0x29, 0xaa, 0x7b, 0x80,
++      0x3c, 0xcf, 0x0d, 0xaa, 0xbd, 0x9d, 0xa2, 0x49, 0xcc, 0x9f, 0xd9, 0xe4,
++      0xdf, 0x03, 0x2c, 0x9a, 0x6c, 0xc7, 0x3c, 0xcb, 0x27, 0x24, 0x7c, 0xf4,
++      0x80, 0x34, 0x1c, 0x7d, 0x58, 0x1a, 0xa7, 0x89, 0xf1, 0xb8, 0x77, 0x6f,
++      0xdc, 0xd1, 0x28, 0xc4, 0xdc, 0x5f, 0xc5, 0xd8, 0x07, 0xe5, 0x87, 0x8e,
++      0x4f, 0xd3, 0x86, 0x8d, 0xd2, 0xc2, 0x3a, 0x7e, 0xde, 0xc7, 0xe3, 0x77,
++      0x80, 0x1e, 0xce, 0x3f, 0xa1, 0x71, 0xdf, 0x1d, 0x75, 0xb1, 0x6b, 0x83,
++      0x8e, 0x5d, 0xd9, 0xee, 0x32, 0x7c, 0xf6, 0x31, 0x09, 0xdb, 0x7e, 0xfb,
++      0xed, 0xa8, 0x17, 0xaf, 0xbb, 0x03, 0xc1, 0x3a, 0xfa, 0x4e, 0x40, 0x0b,
++      0x71, 0x0f, 0xcf, 0xdb, 0x59, 0xe6, 0x9d, 0xf9, 0x1b, 0xe5, 0x74, 0x70,
++      0xf5, 0xf8, 0xdb, 0xea, 0xea, 0xfa, 0x65, 0x7e, 0x9b, 0xb0, 0x17, 0xf3,
++      0xf7, 0x87, 0xeb, 0xda, 0x7d, 0xd7, 0xf4, 0x52, 0x2f, 0xf6, 0xf0, 0xe2,
++      0x20, 0xce, 0x21, 0x55, 0x87, 0x73, 0x56, 0x7f, 0x2f, 0x9a, 0x43, 0x79,
++      0x7e, 0xd6, 0xbf, 0x3b, 0x64, 0x60, 0x2e, 0x56, 0x81, 0xf1, 0x8b, 0xc9,
++      0x6f, 0x33, 0x67, 0x0b, 0xa0, 0xfb, 0x66, 0x75, 0xef, 0x88, 0x77, 0x37,
++      0x50, 0x2f, 0xe1, 0xe1, 0x4f, 0xe6, 0xe3, 0x58, 0xf3, 0x77, 0x75, 0x18,
++      0xe9, 0xff, 0x7e, 0x53, 0xb6, 0x9f, 0xf8, 0x66, 0x13, 0xcf, 0x21, 0x81,
++      0x9b, 0x29, 0x67, 0xdf, 0x81, 0x9c, 0x35, 0xaa, 0x73, 0x9f, 0x62, 0x89,
++      0xf1, 0x5c, 0x1e, 0xf2, 0xc3, 0xfb, 0x7b, 0x8c, 0xfb, 0xf2, 0x7a, 0x3f,
++      0x96, 0x74, 0x12, 0xd3, 0xfb, 0xf1, 0x01, 0xfb, 0x5c, 0xef, 0x9e, 0xb2,
++      0x1f, 0xb3, 0x51, 0xde, 0xe2, 0x8a, 0xe6, 0xa1, 0x35, 0xf1, 0xca, 0x21,
++      0xd8, 0x82, 0x79, 0xc8, 0xf3, 0x5e, 0xd8, 0xc0, 0xc1, 0x20, 0xf5, 0x33,
++      0xaa, 0x63, 0x59, 0x9b, 0x71, 0x7b, 0x60, 0x14, 0x7d, 0x18, 0xd3, 0xaf,
++      0xc9, 0x04, 0xec, 0xff, 0x64, 0x35, 0xa9, 0xbe, 0xe9, 0xc9, 0xc4, 0x79,
++      0x9f, 0x8c, 0xe5, 0x5f, 0x83, 0xbc, 0xbe, 0x06, 0x3c, 0xbc, 0x01, 0xfc,
++      0x34, 0xf4, 0x5a, 0xfd, 0x96, 0xde, 0x8b, 0x8a, 0x70, 0x2f, 0x1e, 0x76,
++      0xb3, 0xe8, 0x61, 0xcd, 0xd8, 0x24, 0xd2, 0x7f, 0x1e, 0xf5, 0xe4, 0xf5,
++      0xdf, 0x6a, 0x79, 0x6b, 0x42, 0xf9, 0x63, 0x6a, 0x0f, 0xd2, 0x9b, 0x93,
++      0xa5, 0x63, 0x95, 0x30, 0x64, 0x8e, 0xf3, 0xfa, 0x53, 0xd4, 0xa3, 0xac,
++      0xf5, 0xe8, 0xb3, 0xd9, 0xa8, 0xb2, 0x8f, 0x39, 0xc8, 0x52, 0x5e, 0xc5,
++      0x11, 0xc0, 0xf7, 0x0e, 0xdb, 0x3d, 0xb7, 0x89, 0x67, 0x9f, 0x0d, 0xb6,
++      0x8a, 0x2d, 0xda, 0x83, 0xe2, 0x97, 0xdd, 0x89, 0x32, 0xca, 0xd9, 0x8d,
++      0x58, 0x1b, 0x96, 0x65, 0x91, 0xe7, 0x58, 0x37, 0xe9, 0x71, 0x38, 0x46,
++      0x77, 0xf3, 0x6a, 0x9a, 0x38, 0x97, 0xf6, 0x35, 0xdf, 0x35, 0xb0, 0xec,
++      0x46, 0x5d, 0x16, 0xd2, 0xf3, 0x1b, 0xd2, 0xdf, 0xd2, 0x5a, 0x87, 0x33,
++      0x2b, 0xd8, 0x98, 0xf4, 0x45, 0x54, 0xbb, 0x8c, 0xe9, 0xc9, 0xce, 0x21,
++      0xac, 0x47, 0x28, 0x1d, 0xe4, 0x99, 0x2c, 0xf8, 0xeb, 0xeb, 0x44, 0x5c,
++      0xc5, 0x9d, 0x09, 0xc3, 0xbb, 0xbb, 0x74, 0xee, 0x9a, 0xfb, 0xd9, 0xde,
++      0x5d, 0xf7, 0xa1, 0x9e, 0x26, 0x99, 0x9f, 0x89, 0xe8, 0x7b, 0x93, 0x71,
++      0xa5, 0xb3, 0xf9, 0x31, 0xe6, 0xff, 0xc7, 0x26, 0x7e, 0xc7, 0x6c, 0xd8,
++      0x2c, 0x6f, 0xd7, 0xfc, 0xbd, 0x51, 0xdd, 0x33, 0xa2, 0x2e, 0x14, 0xe7,
++      0xde, 0x50, 0xef, 0x4f, 0xcf, 0x36, 0xa8, 0xfa, 0xa7, 0x67, 0xd7, 0xde,
++      0x15, 0x62, 0xd9, 0xdb, 0xb8, 0xbf, 0x21, 0x0b, 0x53, 0x0d, 0xb2, 0x38,
++      0x1b, 0x60, 0xbc, 0x96, 0x6e, 0xac, 0x7d, 0x0b, 0xa3, 0xbf, 0x5b, 0x73,
++      0x65, 0x08, 0xeb, 0x37, 0x3f, 0x30, 0x29, 0xe5, 0x01, 0xc6, 0x23, 0xea,
++      0x3e, 0x20, 0x64, 0xa4, 0x01, 0x58, 0xb4, 0xe0, 0x96, 0x6d, 0xee, 0x03,
++      0xb7, 0x68, 0xbd, 0x7e, 0x45, 0xc7, 0x7c, 0xe4, 0x91, 0x21, 0xb9, 0xbe,
++      0x09, 0x45, 0x57, 0x59, 0xf1, 0xca, 0xff, 0xd6, 0x88, 0xfd, 0xf3, 0x7b,
++      0xa3, 0xa0, 0xc6, 0xb2, 0xfb, 0x35, 0xcf, 0xff, 0x4a, 0xa7, 0x8f, 0xca,
++      0x9e, 0x63, 0xbf, 0x0f, 0x5a, 0x9b, 0xbc, 0x3b, 0x4f, 0x52, 0xff, 0x3d,
++      0x49, 0x48, 0x7d, 0xcf, 0x12, 0xb2, 0x1f, 0x45, 0x19, 0xf7, 0xc1, 0x1e,
++      0x55, 0xf3, 0xe0, 0xbd, 0xba, 0x82, 0xfc, 0xaa, 0xfb, 0x21, 0x7e, 0x2c,
++      0xc6, 0xbb, 0x4b, 0x51, 0xdd, 0xdf, 0x0e, 0xbd, 0x8e, 0x63, 0xb2, 0x07,
++      0xbe, 0x26, 0x0f, 0x4c, 0xca, 0xfb, 0x5e, 0xe3, 0xc1, 0xfa, 0x31, 0x7d,
++      0x59, 0xf6, 0xe2, 0x7c, 0xff, 0xde, 0x41, 0x50, 0xc5, 0x23, 0x2b, 0x7b,
++      0x06, 0xba, 0x7c, 0x4c, 0xf6, 0x95, 0xd4, 0xde, 0x81, 0x3a, 0x2f, 0x9c,
++      0x84, 0x4e, 0x0e, 0x2a, 0x7f, 0x12, 0x09, 0x0c, 0x55, 0xd2, 0x92, 0x3f,
++      0xb9, 0x13, 0xe3, 0x70, 0x1f, 0x2e, 0xa3, 0xcf, 0xe5, 0x76, 0xcb, 0x9e,
++      0xaa, 0x37, 0xf6, 0xde, 0x12, 0xdf, 0x27, 0xe1, 0xa3, 0xf9, 0x3e, 0x17,
++      0x0f, 0xaa, 0x93, 0x85, 0x5b, 0xd1, 0xb6, 0x41, 0xf3, 0x96, 0xf7, 0xfc,
++      0xd9, 0x9e, 0xfa, 0xf7, 0x4f, 0x4c, 0x89, 0xe6, 0xf0, 0x9e, 0x6d, 0xfc,
++      0xfe, 0xf6, 0xc2, 0x67, 0x30, 0x36, 0x7e, 0x44, 0x96, 0xe6, 0x26, 0x65,
++      0x79, 0xce, 0x97, 0x33, 0xde, 0xb9, 0x26, 0xed, 0x77, 0xeb, 0x3b, 0xd7,
++      0x19, 0xac, 0xc3, 0x6a, 0x5e, 0xe5, 0x56, 0x7d, 0x8f, 0xf4, 0x75, 0xd3,
++      0xfb, 0x26, 0x70, 0xbb, 0xba, 0x3f, 0xb5, 0x5a, 0xde, 0xd9, 0xcf, 0x57,
++      0x4c, 0x9e, 0x33, 0x78, 0x77, 0xc0, 0xda, 0xeb, 0xde, 0xc7, 0xf4, 0xbd,
++      0xab, 0xaf, 0xe9, 0xbb, 0xfa, 0xe4, 0xe7, 0xa8, 0xa6, 0xf7, 0x56, 0xe8,
++      0x1e, 0xfb, 0x7c, 0x4c, 0xaf, 0x1b, 0xd2, 0x79, 0x3e, 0xab, 0xbb, 0xa6,
++      0xfa, 0xec, 0xd5, 0xd4, 0x63, 0xd4, 0xdf, 0x7b, 0x6b, 0xa8, 0x1b, 0x97,
++      0xed, 0xe9, 0x1b, 0xfc, 0x3b, 0xe0, 0x2c, 0x3b, 0xa6, 0xef, 0xd7, 0xf9,
++      0x77, 0xbe, 0x59, 0xe6, 0xdf, 0x03, 0x23, 0xbf, 0xb8, 0x9f, 0x88, 0xb4,
++      0x3a, 0xaa, 0x9f, 0x47, 0xeb, 0xbe, 0x1d, 0xf2, 0xfb, 0x0c, 0xa1, 0x8f,
++      0x3b, 0x83, 0xd7, 0xde, 0x11, 0xe7, 0xb7, 0x54, 0x94, 0x45, 0x83, 0xdf,
++      0x78, 0x33, 0x06, 0x03, 0x6e, 0xda, 0x28, 0x7b, 0x15, 0x3d, 0x05, 0x75,
++      0x57, 0x22, 0xeb, 0x34, 0xc9, 0xa0, 0xe9, 0xe5, 0xf7, 0xce, 0xaf, 0x95,
++      0x53, 0x96, 0x6f, 0x8a, 0x48, 0x94, 0xdf, 0x70, 0xf1, 0xfd, 0x7a, 0xdf,
++      0x2e, 0x84, 0xf5, 0xf7, 0x53, 0x0e, 0xda, 0x7c, 0x9e, 0xf2, 0x5e, 0x28,
++      0xac, 0xdc, 0xd1, 0x2c, 0xa8, 0x3d, 0x52, 0x00, 0x73, 0x7d, 0x57, 0x92,
++      0xdf, 0xb0, 0x8b, 0x3c, 0x5d, 0xe1, 0xb7, 0x5c, 0xdb, 0xd5, 0x1d, 0x16,
++      0xef, 0x5c, 0x90, 0x74, 0x75, 0x29, 0x9b, 0x5c, 0xae, 0x14, 0xc9, 0x53,
++      0xed, 0x57, 0xc3, 0xda, 0xaf, 0x92, 0xc7, 0xc3, 0xe0, 0xf1, 0x5f, 0xeb,
++      0x75, 0x61, 0xfb, 0x8c, 0xba, 0x0b, 0x9e, 0x89, 0xf1, 0x6c, 0xea, 0x31,
++      0x35, 0x17, 0xda, 0x68, 0xb4, 0x7d, 0x47, 0x50, 0xe9, 0xae, 0xfa, 0x46,
++      0x1e, 0xf2, 0xc9, 0x6f, 0xde, 0x61, 0x5f, 0x4b, 0xfc, 0xb6, 0x7d, 0x58,
++      0x7d, 0x67, 0x52, 0xae, 0x70, 0x5d, 0xf9, 0x4d, 0xfb, 0x68, 0x9d, 0x3c,
++      0x06, 0xf5, 0x58, 0x9b, 0x5a, 0x25, 0xea, 0xad, 0x3b, 0xbf, 0x51, 0x29,
++      0x57, 0xfc, 0xfb, 0x9d, 0x1b, 0x96, 0xa8, 0x13, 0xa2, 0x62, 0x6c, 0xef,
++      0x3b, 0x9b, 0xb2, 0xfa, 0x6e, 0x25, 0xc1, 0xef, 0x2e, 0xe1, 0x3b, 0x76,
++      0xe1, 0x99, 0x67, 0xba, 0xbb, 0x91, 0xc2, 0xe6, 0x54, 0xc6, 0x91, 0x3e,
++      0x2c, 0x39, 0xb5, 0xe7, 0xd6, 0x8c, 0xfc, 0x5e, 0x35, 0x76, 0xb1, 0xf2,
++      0x80, 0xec, 0x39, 0xf9, 0x10, 0xbf, 0xed, 0x51, 0xdf, 0xe5, 0x67, 0x1d,
++      0xd2, 0x18, 0x93, 0x09, 0x35, 0xef, 0x42, 0xed, 0x9b, 0x11, 0xc5, 0xfb,
++      0x5c, 0x2b, 0xd7, 0xb4, 0x50, 0x69, 0x06, 0x8d, 0x01, 0x7d, 0xc7, 0x93,
++      0x58, 0xdc, 0x9f, 0x7f, 0x94, 0xf7, 0x06, 0x5d, 0x9e, 0xdd, 0xed, 0x29,
++      0xf1, 0x0e, 0x67, 0x52, 0xc7, 0xe8, 0xdc, 0xb7, 0xe3, 0xd9, 0x00, 0x65,
++      0xdc, 0x4a, 0x8d, 0xc3, 0xfa, 0x87, 0x25, 0xce, 0x73, 0x65, 0x3d, 0x97,
++      0xe6, 0xba, 0xb9, 0xf0, 0xde, 0xaa, 0x37, 0x1f, 0x7e, 0x0b, 0x93, 0x2f,
++      0xd5, 0x7f, 0xc7, 0xa3, 0xbe, 0x11, 0x57, 0xdf, 0xcd, 0x8c, 0x57, 0x3e,
++      0x21, 0x1f, 0x2b, 0x6d, 0xd4, 0xdf, 0xf0, 0x44, 0xe4, 0x63, 0x95, 0xd7,
++      0x14, 0x4f, 0xf3, 0xea, 0xfb, 0xa3, 0xb0, 0x5e, 0xb3, 0x98, 0xea, 0xa3,
++      0xf6, 0x1d, 0x92, 0x55, 0xf7, 0x4d, 0x4a, 0x58, 0xc6, 0xe7, 0x7f, 0xd9,
++      0xb7, 0x48, 0x8f, 0x08, 0xbf, 0x47, 0xb9, 0xe4, 0x4c, 0xca, 0xe3, 0x73,
++      0xae, 0x7b, 0x97, 0x43, 0x5c, 0xb7, 0x41, 0x96, 0x63, 0xa3, 0x3b, 0xbe,
++      0x67, 0xb7, 0x05, 0xca, 0x33, 0x8d, 0xb0, 0xd7, 0xc4, 0x12, 0x12, 0x65,
++      0x7e, 0x7e, 0x86, 0x7a, 0x1a, 0xc2, 0x1c, 0x2d, 0xf3, 0xaa, 0x7c, 0xa6,
++      0x95, 0x7b, 0x5e, 0x77, 0x21, 0x8e, 0xfc, 0xb8, 0xe3, 0xd9, 0xe5, 0xcf,
++      0x2d, 0xec, 0x94, 0xcf, 0x55, 0x22, 0x81, 0xf2, 0x14, 0xef, 0xfa, 0x59,
++      0xc3, 0x73, 0x92, 0x44, 0x3d, 0xf6, 0x0f, 0x79, 0x89, 0x6f, 0x96, 0xa7,
++      0x8e, 0xfd, 0xc2, 0xbd, 0x6a, 0xe3, 0x3d, 0x6c, 0xcd, 0xb2, 0xe3, 0xef,
++      0xeb, 0x21, 0x86, 0x3f, 0xc2, 0x7a, 0x9b, 0x21, 0x07, 0xf0, 0xdb, 0xd0,
++      0x39, 0xc6, 0x98, 0x57, 0xb5, 0xdd, 0x32, 0x8e, 0xdc, 0x2c, 0x57, 0x57,
++      0xee, 0x0a, 0x5f, 0x86, 0x6c, 0x27, 0x3c, 0xfe, 0xab, 0x7d, 0xf0, 0x03,
++      0x12, 0xfc, 0x22, 0xfc, 0xc4, 0x17, 0x1b, 0x94, 0x6d, 0xa7, 0x3f, 0x43,
++      0xfc, 0x81, 0x18, 0x23, 0x84, 0x7e, 0x1e, 0x6c, 0xf5, 0x64, 0x76, 0x52,
++      0xe4, 0xcb, 0x4d, 0x92, 0x69, 0x65, 0x0c, 0x2b, 0xbf, 0xc2, 0x7e, 0xd5,
++      0xeb, 0x59, 0x4a, 0xbe, 0x42, 0x1d, 0xaf, 0x72, 0x2e, 0xc9, 0xf8, 0x8f,
++      0xe5, 0x93, 0x32, 0x1e, 0xe7, 0x5c, 0x1e, 0x91, 0xc2, 0xdc, 0x63, 0xf8,
++      0x71, 0x9e, 0xa4, 0xfb, 0x1f, 0xe8, 0x7b, 0x04, 0xa3, 0x52, 0x9c, 0x4a,
++      0xcb, 0xc4, 0xec, 0x5e, 0x7e, 0xa3, 0x3b, 0x7c, 0x97, 0x3a, 0x5f, 0xb3,
++      0xe2, 0xc9, 0x40, 0x6f, 0x62, 0x82, 0xf7, 0x26, 0xd4, 0x7c, 0xf6, 0x62,
++      0x3e, 0xdf, 0x6a, 0xe5, 0xdd, 0xf3, 0xab, 0xb0, 0xbf, 0xc6, 0x71, 0xca,
++      0xa1, 0x65, 0x76, 0x06, 0x98, 0xdf, 0x8d, 0xd8, 0x99, 0x65, 0xbb, 0x25,
++      0x78, 0x64, 0xc5, 0xce, 0xa3, 0x5c, 0x9f, 0xf3, 0xaa, 0xf6, 0xff, 0x11,
++      0x6d, 0x51, 0xef, 0x88, 0xdf, 0xd6, 0xaf, 0xc3, 0xb6, 0x9c, 0xe7, 0x4e,
++      0xc4, 0xec, 0x3e, 0x5d, 0x90, 0xc3, 0x78, 0x3d, 0xbf, 0xa3, 0x6b, 0xf8,
++      0x1d, 0x22, 0xde, 0x04, 0xbf, 0xc8, 0xe3, 0xa0, 0xe6, 0xf1, 0x9b, 0xe8,
++      0xdf, 0x5f, 0x83, 0xbb, 0x50, 0x66, 0xea, 0x6f, 0x03, 0xdf, 0x0a, 0xdf,
++      0xc9, 0x73, 0xd6, 0x7f, 0xb0, 0xd5, 0x93, 0x35, 0xd2, 0xb3, 0x1e, 0xcf,
++      0x3b, 0xdb, 0xbc, 0x75, 0xd9, 0x0d, 0x7e, 0xf1, 0x4e, 0x67, 0xaf, 0xfa,
++      0x4e, 0x20, 0x33, 0xb6, 0x1b, 0xb2, 0xe3, 0xcf, 0xab, 0x17, 0x32, 0xc6,
++      0x33, 0x0b, 0xd6, 0xaf, 0xe7, 0x89, 0xe7, 0xf7, 0x82, 0xdc, 0x77, 0xb0,
++      0x39, 0x57, 0x60, 0xc2, 0x2f, 0xab, 0xef, 0x82, 0x60, 0x27, 0xdf, 0xb6,
++      0xf2, 0x5d, 0xd0, 0xf5, 0xd7, 0x78, 0xa0, 0xcd, 0xf3, 0x51, 0x26, 0x78,
++      0xd2, 0xa2, 0xdb, 0xec, 0x06, 0x3e, 0xe5, 0x5e, 0x6c, 0x32, 0xfe, 0xa0,
++      0xf8, 0xe3, 0xb8, 0xdb, 0x19, 0x73, 0x0e, 0xf6, 0xf7, 0x22, 0xbe, 0x56,
++      0xf7, 0x65, 0xe2, 0xbc, 0x7f, 0x93, 0x0c, 0xec, 0x56, 0x77, 0x27, 0x2e,
++      0xac, 0xfa, 0xb6, 0x2b, 0x25, 0x4f, 0xd5, 0x64, 0x65, 0xf8, 0x27, 0x62,
++      0x49, 0xe2, 0x26, 0xca, 0x0a, 0xfb, 0xdd, 0xcb, 0x79, 0xc6, 0x1f, 0x52,
++      0xf3, 0x34, 0x11, 0xc3, 0xf1, 0x9e, 0x83, 0x19, 0x28, 0xcf, 0x72, 0xdd,
++      0x91, 0x2e, 0xf0, 0xd9, 0x3f, 0x6b, 0x55, 0x76, 0x05, 0xe3, 0xb2, 0x8c,
++      0xb6, 0x91, 0xef, 0xd3, 0xfa, 0x2c, 0xf6, 0xc3, 0x6d, 0xbc, 0x0f, 0x90,
++      0x47, 0xd9, 0xdc, 0xc2, 0xfa, 0xb4, 0x7d, 0x5c, 0xc9, 0xc1, 0x23, 0xe0,
++      0xfb, 0x1f, 0xa3, 0xee, 0x63, 0x48, 0x39, 0xc7, 0xf4, 0xca, 0xba, 0x93,
++      0xdf, 0x1f, 0x90, 0x01, 0xc8, 0x05, 0xf3, 0x8f, 0x48, 0x51, 0xdd, 0x63,
++      0x42, 0x3a, 0xc7, 0x67, 0xda, 0x7a, 0x5b, 0xfb, 0x53, 0xd2, 0xb2, 0x5b,
++      0x7f, 0x4f, 0xe6, 0xcb, 0xd3, 0x2e, 0xdd, 0x6e, 0x6c, 0x85, 0x57, 0x0f,
++      0x5d, 0x83, 0x37, 0xc2, 0x2b, 0x78, 0xc3, 0x1b, 0xeb, 0xf1, 0x36, 0x1f,
++      0x6b, 0x78, 0x73, 0xf0, 0xb0, 0x86, 0x27, 0xe7, 0x7b, 0x25, 0x04, 0x39,
++      0x0e, 0xd6, 0xe4, 0x18, 0xb8, 0xc7, 0xd3, 0x99, 0x09, 0x9e, 0x21, 0x2a,
++      0x3e, 0x53, 0x0e, 0x29, 0xbf, 0x5c, 0xc7, 0xfa, 0xb5, 0x7e, 0xcf, 0x2f,
++      0x59, 0xeb, 0x97, 0xdb, 0x7c, 0xfc, 0xf0, 0x77, 0xd3, 0x83, 0x0b, 0x6d,
++      0x35, 0x3d, 0xb8, 0xf9, 0x37, 0xa4, 0x07, 0x6b, 0xe5, 0xb2, 0x5e, 0xa6,
++      0x4c, 0xc8, 0x13, 0xd7, 0x8b, 0xf2, 0x44, 0x39, 0x22, 0x2f, 0x69, 0x4f,
++      0x1b, 0x19, 0x3b, 0xc5, 0xaf, 0xa8, 0xef, 0x36, 0x26, 0x61, 0x83, 0xda,
++      0x02, 0x73, 0x73, 0x31, 0x29, 0x2e, 0xbc, 0x4f, 0xc9, 0xf4, 0x53, 0x55,
++      0xda, 0xa5, 0xeb, 0xcd, 0x7d, 0xb5, 0xcd, 0xcd, 0xaf, 0xb1, 0xb9, 0xf9,
++      0x15, 0x9b, 0xdb, 0xaa, 0xe3, 0xa5, 0xbf, 0x8b, 0xcd, 0x8d, 0xd5, 0x9d,
++      0xcb, 0xf8, 0x67, 0x32, 0x12, 0xc8, 0xf6, 0x44, 0x65, 0x07, 0xfc, 0xc8,
++      0xf0, 0xd4, 0x4e, 0xf9, 0x97, 0x53, 0x93, 0xea, 0x8e, 0xd2, 0x5f, 0x38,
++      0xc9, 0xf8, 0x03, 0x01, 0x57, 0x3e, 0x80, 0x78, 0x77, 0xbc, 0xa3, 0x41,
++      0x76, 0xbc, 0x4b, 0x9d, 0x35, 0x9a, 0xd9, 0x40, 0xbb, 0x70, 0x17, 0x3c,
++      0xe7, 0x58, 0x4e, 0x22, 0xc0, 0xfb, 0x6a, 0x8d, 0x32, 0x1e, 0x6b, 0x96,
++      0x9d, 0xc0, 0x4e, 0x85, 0x1b, 0x1c, 0xf5, 0x2d, 0x79, 0x46, 0x9d, 0xe5,
++      0xdc, 0xb2, 0xd9, 0x1b, 0x17, 0x7c, 0x68, 0x31, 0xe5, 0xab, 0xd5, 0x5b,
++      0xd4, 0x77, 0xd1, 0x17, 0x4a, 0xd5, 0xd6, 0xd5, 0x79, 0x3e, 0xff, 0x7b,
++      0xd4, 0x89, 0x81, 0x57, 0xf5, 0x77, 0x7f, 0x82, 0x8a, 0x9f, 0xc5, 0xb9,
++      0x31, 0x75, 0xa7, 0xea, 0x4a, 0x90, 0xfc, 0x52, 0x71, 0x53, 0x3c, 0x1b,
++      0x04, 0xc6, 0x99, 0x01, 0x92, 0xb6, 0x19, 0xf3, 0x69, 0xfc, 0x09, 0xfb,
++      0xbf, 0x47, 0x9d, 0xed, 0x2e, 0x81, 0x37, 0xae, 0xda, 0xfb, 0xcd, 0xc7,
++      0x88, 0xeb, 0x6b, 0xf7, 0x87, 0xaf, 0xc5, 0xf7, 0xde, 0xb7, 0x67, 0xfa,
++      0x1c, 0x42, 0xef, 0x15, 0xe9, 0x18, 0x5c, 0x9d, 0xab, 0xad, 0xf7, 0x7f,
++      0x29, 0x88, 0xf5, 0xf8, 0x7f, 0x0f, 0x88, 0xed, 0xac, 0xc3, 0x73, 0xe2,
++      0xa8, 0x38, 0x30, 0x43, 0xfe, 0x96, 0xb1, 0x4e, 0xd3, 0x71, 0xdf, 0x9f,
++      0x07, 0x3a, 0xcf, 0xd6, 0xc7, 0x81, 0xec, 0x23, 0xa2, 0xee, 0x63, 0xd4,
++      0xfe, 0x0f, 0x0e, 0xf7, 0x77, 0x32, 0x81, 0x7b, 0x4a, 0x93, 0x12, 0x3c,
++      0x3a, 0x2a, 0xa1, 0x69, 0xee, 0xa5, 0x67, 0xa4, 0x18, 0x73, 0xe5, 0x63,
++      0xce, 0xea, 0xd8, 0xa4, 0xd3, 0x58, 0x4b, 0xfb, 0x23, 0x32, 0x78, 0xf2,
++      0x31, 0x09, 0x1f, 0xe5, 0xbb, 0x55, 0xe7, 0x28, 0xb0, 0x47, 0x1b, 0x64,
++      0x2e, 0xc6, 0xfd, 0xe4, 0xb0, 0x3a, 0x97, 0x5e, 0x1e, 0x7b, 0x2d, 0x5c,
++      0x04, 0x56, 0xc8, 0x2b, 0xdb, 0x82, 0x74, 0x25, 0x96, 0x38, 0xbc, 0x99,
++      0x3a, 0x85, 0x18, 0x33, 0x30, 0x3e, 0x17, 0x56, 0xf7, 0x83, 0x96, 0x63,
++      0xac, 0x8b, 0xf8, 0xfd, 0x28, 0x71, 0x06, 0x6c, 0xc7, 0xa8, 0x44, 0x99,
++      0x0f, 0x1e, 0xad, 0xe1, 0x0c, 0xda, 0x84, 0x41, 0x27, 0x26, 0xa1, 0x53,
++      0xde, 0xdc, 0xf9, 0x8f, 0x95, 0x8c, 0x13, 0x3b, 0x25, 0x38, 0xcd, 0xe7,
++      0xfa, 0x78, 0x88, 0xd8, 0x1d, 0xbe, 0xe1, 0xec, 0x67, 0xd1, 0x1f, 0xdf,
++      0x65, 0xf4, 0x37, 0xba, 0xc8, 0x97, 0xff, 0xb6, 0xff, 0x43, 0x81, 0xb2,
++      0xff, 0xff, 0x01, 0xe6, 0x8e, 0x9a, 0x21, 0xc0, 0x4e, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_COM_b06FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_COM_b06FwRodata[(0x14/4) + 1] = {
+-      0x08000e7c, 0x08000ec4, 0x08000f04, 0x08000f50, 0x08000f84, 0x00000000
++      0x08000e7c, 0x08000ec4, 0x08000ef8, 0x08000f44, 0x08000f78, 0x00000000
+ };
+ static struct fw_info bnx2_com_fw_06 = {
+-      /* Firmware version: 4.6.16 */
++      /* Firmware version: 4.4.2 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0x10,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x2,
+       .start_addr                     = 0x080000f8,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x4da4,
++      .text_len                       = 0x4ebc,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_COM_b06FwText,
+       .gz_text_len                    = sizeof(bnx2_COM_b06FwText),
+@@ -867,15 +872,15 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_COM_b06FwData,
+-      .sbss_addr                      = 0x08004de0,
++      .sbss_addr                      = 0x08004f00,
+       .sbss_len                       = 0x38,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08004e18,
++      .bss_addr                       = 0x08004f38,
+       .bss_len                        = 0xbc,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x08004da4,
++      .rodata_addr                    = 0x08004ebc,
+       .rodata_len                     = 0x14,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_COM_b06FwRodata,
+@@ -898,1219 +903,1232 @@
+ };
+ static u8 bnx2_CP_b06FwText[] = {
+-      0x9d, 0xbc, 0x0d, 0x7c, 0x1b, 0xe5, 0x95, 0x2e, 0xfe, 0xcc, 0x48, 0xb2,
+-      0x65, 0x5b, 0xb6, 0xc7, 0x8e, 0x92, 0x28, 0xac, 0x37, 0xd1, 0xc4, 0x23,
+-      0x47, 0xc1, 0xa6, 0x8c, 0x12, 0x27, 0xa8, 0xac, 0x4a, 0x54, 0xc7, 0x24,
+-      0x4e, 0x48, 0xc1, 0x29, 0x69, 0x6b, 0xb8, 0x2d, 0xa8, 0xf9, 0xc2, 0x84,
+-      0x40, 0x43, 0xcb, 0xde, 0x6b, 0xee, 0xed, 0xae, 0x55, 0xdb, 0x49, 0x9c,
+-      0x44, 0x96, 0x6c, 0xc7, 0x24, 0xa1, 0xdb, 0xff, 0xa2, 0xc4, 0xce, 0x07,
+-      0x54, 0xb6, 0xd2, 0x96, 0xee, 0x86, 0xde, 0x74, 0xd1, 0x4d, 0x02, 0x18,
+-      0xca, 0x47, 0xda, 0xe5, 0x76, 0x69, 0x7f, 0xbd, 0xc5, 0x97, 0x42, 0x08,
+-      0x5b, 0x0a, 0xe9, 0xe7, 0x86, 0x7e, 0x30, 0xf7, 0x39, 0x23, 0x29, 0x31,
+-      0x2c, 0xdb, 0x76, 0xff, 0xfa, 0xfd, 0xe6, 0x27, 0xcd, 0xe8, 0xfd, 0x38,
+-      0xef, 0x79, 0xcf, 0x79, 0xce, 0x73, 0xde, 0x79, 0x67, 0xfc, 0x40, 0x39,
+-      0x0a, 0x9f, 0x4a, 0x1e, 0x1f, 0x6a, 0xde, 0xb6, 0x61, 0x69, 0xe8, 0x43,
+-      0x4b, 0xe5, 0xdc, 0xa9, 0x95, 0x38, 0xf1, 0x67, 0x7e, 0xfc, 0x7f, 0x6e,
+-      0xc1, 0xc2, 0x47, 0xe1, 0xd1, 0x58, 0xf8, 0xed, 0x00, 0xb4, 0x62, 0xff,
+-      0x72, 0xc0, 0xad, 0x46, 0xc6, 0x3a, 0x5a, 0x0c, 0xb8, 0x1d, 0x91, 0x6d,
+-      0xb7, 0x6f, 0x30, 0x80, 0x68, 0xa6, 0xd1, 0xbf, 0x1c, 0x7f, 0xb0, 0xe2,
+-      0x5e, 0x27, 0xe4, 0xfa, 0x5f, 0x46, 0x7e, 0xdf, 0xfd, 0xed, 0x6b, 0xf4,
+-      0x0b, 0x69, 0x07, 0xdc, 0x5a, 0x24, 0x0e, 0xad, 0x01, 0xee, 0x3a, 0xd6,
+-      0xf9, 0xca, 0x82, 0xaf, 0x28, 0xa8, 0x2a, 0xb6, 0x75, 0xde, 0xfa, 0xf6,
+-      0x02, 0x5f, 0xac, 0x2c, 0xa2, 0xe1, 0xf1, 0x2c, 0xda, 0x9b, 0x06, 0xba,
+-      0xad, 0x4a, 0x23, 0x04, 0xb7, 0x61, 0x74, 0x0c, 0x28, 0x9e, 0xf0, 0x96,
+-      0x25, 0xf0, 0x94, 0x1a, 0x88, 0x5f, 0x11, 0x41, 0xfb, 0x95, 0xe3, 0xe5,
+-      0x71, 0x67, 0xc4, 0x8d, 0xb6, 0xac, 0x3b, 0xfe, 0x17, 0x11, 0x03, 0x2b,
+-      0xb3, 0x46, 0x19, 0xaa, 0x34, 0xf4, 0x65, 0x5f, 0x77, 0xe7, 0xdb, 0x6b,
+-      0x2e, 0x7c, 0xdf, 0x56, 0x9b, 0xff, 0x9e, 0x15, 0x73, 0x46, 0x80, 0xed,
+-      0x09, 0xcb, 0x2a, 0x89, 0xdc, 0x7c, 0xb3, 0x1a, 0x31, 0x7c, 0x47, 0xb0,
+-      0x0c, 0xeb, 0x35, 0x7c, 0x71, 0x47, 0xf3, 0x2f, 0x94, 0x53, 0x23, 0x4d,
+-      0x88, 0x1f, 0x75, 0x20, 0xaa, 0x3d, 0xcb, 0xef, 0xb9, 0x73, 0x3b, 0xc2,
+-      0x4d, 0x38, 0x70, 0xf4, 0x22, 0xaf, 0x3b, 0xed, 0x6b, 0xbd, 0xfb, 0xe7,
+-      0xce, 0xbd, 0x25, 0xfc, 0x2c, 0x1e, 0x3c, 0x2a, 0xbf, 0xef, 0x40, 0x77,
+-      0x93, 0x82, 0xa9, 0x9b, 0x37, 0xc3, 0x61, 0x34, 0xa1, 0x6f, 0xbf, 0xe2,
+-      0xec, 0x69, 0x52, 0x11, 0xf5, 0xea, 0xc1, 0x18, 0x27, 0xc1, 0x69, 0x20,
+-      0x56, 0x1a, 0x09, 0x3b, 0xdf, 0x48, 0x44, 0x34, 0x87, 0x61, 0x59, 0xc1,
+-      0xd0, 0x6c, 0x38, 0x6a, 0x2c, 0xeb, 0x31, 0xd3, 0x03, 0xff, 0xa7, 0x9e,
+-      0x47, 0x7c, 0xb4, 0x1d, 0xaa, 0xf1, 0x3c, 0x7a, 0x46, 0x9f, 0xc7, 0x43,
+-      0x7b, 0xcb, 0x31, 0x35, 0x83, 0xe3, 0x4d, 0xf9, 0xf0, 0xed, 0x05, 0xd2,
+-      0xb7, 0xc8, 0xd1, 0xcc, 0xc3, 0x8d, 0x29, 0xc7, 0x39, 0x7e, 0x4b, 0x99,
+-      0x8b, 0xd6, 0xd4, 0xec, 0xcb, 0x65, 0xb6, 0xb3, 0x4c, 0xdf, 0xfb, 0xca,
+-      0xc4, 0x47, 0x23, 0xf8, 0x4e, 0x42, 0xc1, 0x96, 0x50, 0x15, 0xa2, 0x35,
+-      0x32, 0x5e, 0xcb, 0x3a, 0x6a, 0x9e, 0xb3, 0xa6, 0x34, 0xe9, 0x6b, 0x12,
+-      0xcf, 0xf2, 0xbf, 0x1d, 0xa1, 0x57, 0xad, 0x9c, 0x57, 0xda, 0xfb, 0x3c,
+-      0x6d, 0x68, 0x2d, 0xaf, 0x3b, 0x91, 0x4a, 0x20, 0x56, 0x15, 0xf9, 0x04,
+-      0xcf, 0x75, 0xf3, 0x2d, 0xc5, 0xed, 0x7e, 0x3b, 0xe1, 0xfe, 0x54, 0xa5,
+-      0xa1, 0xde, 0x57, 0x0d, 0x27, 0x9e, 0xa3, 0xcc, 0x27, 0xcc, 0xcd, 0x70,
+-      0x19, 0x5f, 0x10, 0x9b, 0xe3, 0xb8, 0x5e, 0xb4, 0x30, 0xbb, 0x58, 0x5f,
+-      0xda, 0xd5, 0xb0, 0x23, 0x65, 0x59, 0xbb, 0xcc, 0xe8, 0x87, 0xcb, 0x68,
+-      0x10, 0xa7, 0x13, 0xed, 0x70, 0x47, 0x02, 0xfe, 0xf3, 0x08, 0x63, 0x79,
+-      0xd6, 0x8b, 0x27, 0x12, 0x70, 0xb6, 0x2c, 0xa8, 0x43, 0x4f, 0x36, 0x82,
+-      0xeb, 0xb3, 0x26, 0x5a, 0xb3, 0x7f, 0xda, 0xca, 0x6e, 0x48, 0xf9, 0x39,
+-      0x86, 0x3f, 0x58, 0xf9, 0x31, 0xc8, 0xf8, 0xe4, 0x9b, 0xf3, 0x9a, 0xba,
+-      0x02, 0xbb, 0x47, 0x0c, 0xec, 0xe4, 0xfc, 0xad, 0x0a, 0xe5, 0xa2, 0x65,
+-      0xd0, 0xcd, 0xf3, 0x88, 0x60, 0x45, 0xd6, 0xe0, 0x9c, 0x46, 0xb0, 0x3c,
+-      0x55, 0xaf, 0x8d, 0x62, 0x21, 0xa2, 0xbe, 0xbc, 0x6d, 0xef, 0xe1, 0x78,
+-      0xd7, 0x07, 0xda, 0x51, 0x49, 0x1b, 0xc9, 0x2c, 0x09, 0xa3, 0x85, 0xfd,
+-      0xaf, 0xf9, 0x33, 0xfa, 0xbf, 0x89, 0xfd, 0xbf, 0xc5, 0xfe, 0x73, 0x76,
+-      0xff, 0x70, 0xae, 0xe6, 0xb9, 0x9b, 0xf6, 0xb8, 0x3b, 0xe3, 0x74, 0xae,
+-      0x4a, 0x79, 0xb1, 0x2b, 0x63, 0xd2, 0xe6, 0xe4, 0x2f, 0x1f, 0x76, 0x8c,
+-      0xd4, 0x61, 0xe7, 0x88, 0xee, 0x7b, 0x8a, 0xbf, 0x7b, 0xc7, 0xae, 0xc0,
+-      0xf6, 0x11, 0x05, 0x87, 0x8c, 0x2b, 0xd0, 0xc3, 0xdf, 0x07, 0x46, 0xe6,
+-      0xe2, 0xc1, 0x11, 0x07, 0xc2, 0x33, 0xa6, 0x8f, 0x43, 0xbe, 0xaf, 0x40,
+-      0x7c, 0xcc, 0x8f, 0x9e, 0xc4, 0xb3, 0xb6, 0x0e, 0x2b, 0x23, 0xdf, 0x2e,
+-      0xfa, 0x33, 0x7d, 0xc7, 0x8f, 0x0d, 0x09, 0x1f, 0x7a, 0x52, 0xe2, 0x07,
+-      0x6e, 0xda, 0xa6, 0xf8, 0xc1, 0xaf, 0x80, 0x2a, 0xb6, 0x9f, 0x2d, 0xfe,
+-      0xaf, 0xc0, 0xc9, 0x79, 0xdb, 0xc8, 0xff, 0x76, 0xa5, 0xc4, 0x26, 0xa4,
+-      0x4d, 0xb1, 0x0b, 0xf9, 0x5d, 0x4b, 0xbb, 0x2b, 0x87, 0xff, 0x70, 0x39,
+-      0x82, 0x0f, 0x68, 0x78, 0xad, 0x59, 0xae, 0xd3, 0xde, 0x43, 0x52, 0x66,
+-      0x10, 0x47, 0x32, 0xe2, 0xa7, 0x7e, 0xb4, 0x24, 0x26, 0xd9, 0x7e, 0x33,
+-      0xdb, 0x36, 0xf1, 0x4f, 0xd9, 0x26, 0xfc, 0x63, 0x36, 0x88, 0x7f, 0xa0,
+-      0x1e, 0xbf, 0x99, 0xf5, 0xe3, 0xd1, 0x6c, 0x1d, 0xbe, 0x91, 0xf5, 0xe1,
+-      0xeb, 0x9c, 0xbf, 0xaf, 0x65, 0xdb, 0x69, 0xfb, 0x1a, 0x8e, 0x67, 0x45,
+-      0xff, 0x25, 0x1c, 0x6f, 0x39, 0x7a, 0x47, 0xea, 0x83, 0xa7, 0x69, 0x5b,
+-      0xff, 0x60, 0xae, 0x46, 0xae, 0xb6, 0xd9, 0xb6, 0xc9, 0x5d, 0xbc, 0xbe,
+-      0x7b, 0xa4, 0x3e, 0x7a, 0xa5, 0x62, 0x59, 0x6a, 0xa8, 0x31, 0x7c, 0x4a,
+-      0x55, 0x31, 0xe5, 0xd5, 0xfd, 0x39, 0x55, 0xf7, 0x47, 0xe1, 0x42, 0x82,
+-      0xbe, 0x11, 0x9f, 0xa9, 0xa7, 0xe3, 0xb4, 0x29, 0xaf, 0x31, 0xca, 0xf1,
+-      0xe8, 0xfe, 0xb8, 0xaa, 0x61, 0x67, 0x4a, 0x3f, 0x10, 0x57, 0xbd, 0x88,
+-      0x67, 0xcb, 0xf1, 0xb3, 0x11, 0xbd, 0x3f, 0xae, 0xde, 0x88, 0x78, 0xad,
+-      0x65, 0x7d, 0x3d, 0x84, 0x6d, 0xb3, 0x23, 0x88, 0xce, 0x8c, 0x20, 0x36,
+-      0x37, 0x52, 0x87, 0x54, 0x0a, 0x78, 0x6b, 0xc0, 0xf0, 0xfd, 0x8b, 0xd2,
+-      0x8e, 0xbf, 0x6e, 0xd7, 0xfd, 0x7e, 0xb5, 0x31, 0x3e, 0xaa, 0x2e, 0xa1,
+-      0x4b, 0xc3, 0xef, 0x8b, 0xac, 0x44, 0x97, 0x7d, 0x4d, 0x81, 0x66, 0x78,
+-      0xd1, 0x9b, 0xfa, 0x30, 0x62, 0xde, 0xfa, 0x8e, 0x21, 0xb5, 0xfe, 0xa2,
+-      0xa9, 0xea, 0x93, 0xed, 0xaa, 0x65, 0xfd, 0x7c, 0xf1, 0x5b, 0x96, 0x7f,
+-      0x96, 0x65, 0x2d, 0x5a, 0x2c, 0x7d, 0xfa, 0x51, 0x13, 0x31, 0xb1, 0xd6,
+-      0x9e, 0xc3, 0x72, 0x9c, 0x1b, 0xa9, 0x65, 0x1f, 0x1a, 0xfe, 0xf7, 0x35,
+-      0x7a, 0x70, 0xb3, 0x5a, 0x8e, 0xd7, 0xc6, 0xca, 0xf1, 0x0a, 0xc7, 0xf3,
+-      0x8b, 0x11, 0x1f, 0x7e, 0x35, 0x62, 0x59, 0x9f, 0x32, 0xff, 0x0a, 0xc3,
+-      0xb5, 0x83, 0xf8, 0xc7, 0x09, 0x2f, 0x7e, 0x96, 0xd0, 0xf0, 0x6a, 0x22,
+-      0x7a, 0xef, 0x0c, 0xe8, 0xd1, 0x09, 0xe5, 0xf4, 0xed, 0x55, 0x68, 0x6c,
+-      0xaf, 0x52, 0xf4, 0xb6, 0x3d, 0xd0, 0x7d, 0x57, 0x2a, 0x5e, 0x9c, 0xcf,
+-      0x68, 0xf8, 0x49, 0xa6, 0x3e, 0xfc, 0xcf, 0xec, 0xf3, 0x37, 0xe6, 0x63,
+-      0x56, 0x6e, 0x96, 0xe8, 0x4d, 0x74, 0x44, 0x3d, 0xa7, 0xa8, 0xe7, 0x14,
+-      0xf5, 0x9c, 0xa2, 0x9e, 0x29, 0xc3, 0xa3, 0x29, 0xea, 0x99, 0xba, 0xfb,
+-      0x3a, 0x6d, 0xea, 0x6b, 0x9c, 0xc7, 0xe3, 0xf6, 0x3c, 0x86, 0x39, 0x5f,
+-      0x7f, 0x81, 0xbf, 0xb5, 0xb1, 0xf5, 0x59, 0xeb, 0xbf, 0x79, 0x65, 0x4c,
+-      0x0f, 0xcf, 0xcc, 0xe3, 0x97, 0x8c, 0xed, 0x3b, 0x56, 0x4c, 0x93, 0x71,
+-      0xc9, 0xf8, 0x6c, 0xfd, 0xf9, 0xb7, 0x29, 0x3b, 0x15, 0x94, 0x5b, 0xd6,
+-      0x5e, 0xb3, 0xf0, 0xbf, 0xb7, 0x38, 0xbe, 0x9b, 0x95, 0xbc, 0x5d, 0xfd,
+-      0x5d, 0x29, 0xf5, 0x1d, 0x8c, 0xaa, 0x2b, 0x79, 0xae, 0xc7, 0xa3, 0xf8,
+-      0xa8, 0xe3, 0xbd, 0xe7, 0xf7, 0x7a, 0x65, 0x3e, 0xfc, 0x97, 0xce, 0x69,
+-      0x8f, 0x76, 0x7f, 0x77, 0xf2, 0x5c, 0xc6, 0x22, 0xb6, 0x28, 0x36, 0xe0,
+-      0xa5, 0xbd, 0x5c, 0x53, 0xf8, 0x0f, 0x71, 0x35, 0xb2, 0x0d, 0xed, 0xcd,
+-      0x8f, 0xd8, 0x7d, 0x94, 0x24, 0xc5, 0x6f, 0x14, 0xbc, 0xf5, 0x61, 0x05,
+-      0xa7, 0x42, 0x06, 0x6d, 0xe6, 0x18, 0x71, 0x01, 0x28, 0x4d, 0xc2, 0xed,
+-      0x89, 0x44, 0x90, 0x18, 0x80, 0xbb, 0x2c, 0x12, 0xc6, 0xc2, 0x81, 0xfa,
+-      0xce, 0x73, 0xd0, 0x83, 0x03, 0x8a, 0xde, 0xce, 0x58, 0x62, 0x8e, 0x53,
+-      0x8f, 0x57, 0x2a, 0xba, 0xbf, 0x44, 0x81, 0x5b, 0x61, 0xb9, 0x40, 0xe6,
+-      0x18, 0x76, 0x66, 0xe5, 0x77, 0x18, 0x46, 0xe6, 0x37, 0xc5, 0xbe, 0x24,
+-      0xa6, 0xd0, 0xee, 0xcf, 0x71, 0xec, 0xba, 0x9f, 0xf8, 0xea, 0x76, 0x45,
+-      0x3a, 0x71, 0x38, 0x01, 0x77, 0x49, 0x64, 0x2b, 0x9e, 0x4c, 0x84, 0x67,
+-      0x16, 0xcb, 0x29, 0x2c, 0xe7, 0xcf, 0x4c, 0x97, 0xe5, 0xc7, 0x56, 0xd4,
+-      0x9b, 0x97, 0xa5, 0x3c, 0x79, 0x0c, 0x7b, 0x52, 0x52, 0x37, 0x62, 0xd7,
+-      0x75, 0xb2, 0x8f, 0xbe, 0x44, 0x7d, 0xdb, 0x0d, 0x8a, 0x1e, 0x7e, 0x98,
+-      0xf3, 0xd7, 0x83, 0xc6, 0xe8, 0x1b, 0xd0, 0xb5, 0x4e, 0xe4, 0x65, 0x59,
+-      0x90, 0xc9, 0xcb, 0x31, 0x3f, 0x03, 0xe5, 0xf6, 0x14, 0xac, 0x39, 0x06,
+-      0x3c, 0x3e, 0xc3, 0xf0, 0xbf, 0xe3, 0xa8, 0xc5, 0x01, 0xce, 0x4f, 0x1f,
+-      0x7d, 0x45, 0xf0, 0xec, 0xee, 0xbd, 0x7e, 0x78, 0x0c, 0x0b, 0x47, 0x42,
+-      0xb5, 0x78, 0x96, 0x58, 0x5b, 0x45, 0xdf, 0x7c, 0x5e, 0x43, 0x74, 0x4e,
+-      0x24, 0xac, 0xdc, 0x92, 0x1d, 0x2d, 0xcc, 0xc1, 0x8b, 0x35, 0x05, 0x19,
+-      0xdf, 0x77, 0xbd, 0x5a, 0xf9, 0xe0, 0xeb, 0x50, 0x3a, 0x52, 0x7a, 0x30,
+-      0x0e, 0x0b, 0xd5, 0x8b, 0x75, 0xff, 0x94, 0xf2, 0x96, 0x8a, 0x2a, 0x62,
+-      0x75, 0xf6, 0xfd, 0xe5, 0x1a, 0xb5, 0x31, 0xc6, 0x65, 0x07, 0x43, 0x5f,
+-      0x54, 0xd3, 0x4d, 0x36, 0x13, 0x74, 0xd9, 0xd7, 0x1c, 0x48, 0x3b, 0xa3,
+-      0x3e, 0x07, 0x7e, 0x6f, 0x45, 0xd7, 0xc9, 0xb5, 0x72, 0xc4, 0xda, 0x1b,
+-      0x7d, 0x4e, 0x34, 0x86, 0xb7, 0xd3, 0x07, 0xa7, 0xd6, 0xb5, 0xf0, 0xbf,
+-      0x80, 0x79, 0x1a, 0xf5, 0xfe, 0xed, 0x90, 0xdf, 0xef, 0xd0, 0x6e, 0x5a,
+-      0xa4, 0x2e, 0xcb, 0x88, 0x1d, 0xea, 0x9a, 0xf8, 0x78, 0x9f, 0x69, 0x59,
+-      0x87, 0xcd, 0x13, 0x4a, 0x4b, 0xea, 0x5d, 0x2b, 0xea, 0x8c, 0x47, 0x4b,
+-      0x23, 0x01, 0x73, 0x27, 0xc1, 0xd8, 0x11, 0x89, 0x2b, 0xd1, 0x6c, 0x9f,
+-      0x72, 0x7d, 0xb6, 0x5f, 0x59, 0x91, 0x95, 0xf2, 0x27, 0x94, 0xe5, 0x59,
+-      0x29, 0x5f, 0x2c, 0x1b, 0x66, 0x59, 0xe0, 0x48, 0x22, 0x10, 0x2c, 0x96,
+-      0x5f, 0xc1, 0xb2, 0xd7, 0x5f, 0x2a, 0x1b, 0xa6, 0xad, 0x9a, 0x9c, 0x97,
+-      0x0a, 0x6c, 0xd6, 0xf4, 0x68, 0x9c, 0x3a, 0x2f, 0x8d, 0xf8, 0x6e, 0x7d,
+-      0xdd, 0xc8, 0x05, 0x1d, 0x9c, 0x83, 0xa3, 0x1c, 0x59, 0x2b, 0x71, 0x6e,
+-      0x83, 0xe1, 0x42, 0xbf, 0x56, 0x8d, 0x0d, 0xe6, 0x6f, 0xad, 0xcd, 0xeb,
+-      0xe4, 0xbf, 0xbc, 0x6c, 0xb0, 0xcb, 0xd7, 0xb1, 0xbc, 0x6e, 0x1e, 0x2d,
+-      0x60, 0xeb, 0xa9, 0x04, 0x06, 0x1d, 0x11, 0x62, 0x7e, 0x73, 0xc0, 0xdf,
+-      0x03, 0x99, 0x1b, 0x3f, 0xae, 0xa7, 0x2c, 0x69, 0xe7, 0x74, 0xfc, 0x45,
+-      0xfc, 0x72, 0x19, 0xb9, 0x26, 0xe5, 0xa6, 0x68, 0xdf, 0x82, 0x75, 0x96,
+-      0x35, 0x64, 0x8a, 0x9d, 0xfb, 0x68, 0xe7, 0x33, 0xe1, 0xaf, 0xd5, 0xe3,
+-      0x69, 0x56, 0x38, 0x9c, 0x98, 0x81, 0xb4, 0xa6, 0x12, 0x73, 0xef, 0xf2,
+-      0xa0, 0x2a, 0xaa, 0x94, 0x90, 0xdb, 0x60, 0x42, 0xc6, 0x59, 0x89, 0xa8,
+-      0x53, 0x0f, 0xca, 0xdc, 0x95, 0x30, 0xe6, 0x35, 0xa8, 0xac, 0x77, 0xc9,
+-      0x97, 0x65, 0xcc, 0x7e, 0xfa, 0x72, 0xdc, 0xd6, 0x51, 0xeb, 0xa5, 0x71,
+-      0x4b, 0x7b, 0x45, 0x1d, 0xfd, 0x67, 0xea, 0x59, 0xd6, 0x8e, 0x4b, 0xba,
+-      0x2d, 0x89, 0x96, 0x51, 0xb7, 0xc7, 0x12, 0x81, 0xf0, 0xd3, 0x88, 0x2b,
+-      0x6d, 0x59, 0x27, 0xc6, 0x12, 0x52, 0xaf, 0x8f, 0xe5, 0xfb, 0x95, 0x95,
+-      0x97, 0xea, 0x4c, 0x15, 0xfc, 0x56, 0xc6, 0x23, 0xe3, 0xbb, 0x0e, 0x1b,
+-      0xf6, 0xea, 0xf1, 0x38, 0xc4, 0xae, 0xa2, 0x58, 0x6f, 0xea, 0x7e, 0xda,
+-      0x1f, 0xed, 0x06, 0xa8, 0x49, 0xc6, 0xdc, 0x79, 0x0c, 0x00, 0xee, 0xd8,
+-      0xdb, 0xce, 0xb1, 0x5a, 0x78, 0xcd, 0xac, 0xc5, 0x18, 0xbd, 0xb4, 0x3a,
+-      0x29, 0xd7, 0xa7, 0xcb, 0x18, 0x51, 0xd6, 0x1f, 0xf5, 0x97, 0xa1, 0x5c,
+-      0xe4, 0xfc, 0x1b, 0x35, 0x6f, 0xbf, 0x1f, 0x54, 0xff, 0x17, 0xd6, 0x98,
+-      0x37, 0x7f, 0xad, 0x3a, 0x29, 0x9c, 0xaf, 0x1d, 0x5a, 0xd2, 0xc3, 0x78,
+-      0x17, 0xb7, 0x2a, 0x0c, 0xbd, 0xfd, 0x82, 0xd2, 0x8d, 0x1b, 0x43, 0x7a,
+-      0xec, 0x87, 0x8a, 0x1e, 0x1d, 0x50, 0x0c, 0xfa, 0x61, 0x10, 0xab, 0xb2,
+-      0xef, 0xef, 0xeb, 0xfb, 0x50, 0x0f, 0x4b, 0x3f, 0xd2, 0xdf, 0x59, 0xf4,
+-      0xdb, 0x63, 0x2a, 0x8e, 0x47, 0xc6, 0xa6, 0x60, 0xb3, 0x3d, 0xa6, 0x15,
+-      0xb6, 0x7f, 0x7c, 0xd7, 0x74, 0x61, 0xe3, 0xde, 0x53, 0x0b, 0xc5, 0x40,
+-      0x36, 0x1d, 0x8d, 0xa2, 0xb7, 0xd9, 0x85, 0x0d, 0xa3, 0x37, 0xa9, 0x22,
+-      0x1b, 0xd4, 0xf9, 0x65, 0xf9, 0x6f, 0x85, 0xbc, 0xc5, 0x83, 0xf5, 0x59,
+-      0xce, 0x1d, 0x31, 0x74, 0xfd, 0x51, 0x99, 0xdb, 0x5a, 0x7e, 0xcb, 0xdc,
+-      0x7a, 0xf9, 0x2d, 0xf3, 0x3c, 0x8b, 0xdf, 0xd5, 0xf0, 0xcf, 0x12, 0x59,
+-      0x9a, 0x91, 0xd8, 0x0f, 0x77, 0x45, 0xa4, 0x0b, 0x77, 0x0d, 0x58, 0x56,
+-      0x7f, 0xc0, 0xb2, 0xca, 0x42, 0xe4, 0x59, 0x81, 0xc6, 0xf0, 0x95, 0x4a,
+-      0x09, 0xa6, 0xb4, 0x66, 0xf4, 0x1f, 0x2d, 0x89, 0x55, 0x47, 0x66, 0xd1,
+-      0xf7, 0x35, 0xfc, 0x6c, 0x49, 0x3b, 0x26, 0xc6, 0xa7, 0x8f, 0x21, 0x6f,
+-      0x67, 0xdf, 0x5e, 0x50, 0xb4, 0x33, 0x91, 0x5f, 0x64, 0xd7, 0xfb, 0xd3,
+-      0xf4, 0xcb, 0xb8, 0x86, 0x18, 0xfd, 0x83, 0x32, 0xd5, 0xa2, 0xe7, 0x12,
+-      0xa7, 0xfe, 0xa0, 0xfa, 0x17, 0x1b, 0x3b, 0x13, 0xef, 0x5a, 0x0c, 0xa7,
+-      0xfc, 0xe4, 0x1a, 0xef, 0xcd, 0xbc, 0xd7, 0x6e, 0xca, 0x6c, 0xbb, 0x91,
+-      0xb2, 0x17, 0x1b, 0xef, 0xcc, 0xac, 0xb0, 0xc7, 0x9c, 0x66, 0xe1, 0x4d,
+-      0x7b, 0x45, 0xa7, 0xa2, 0x03, 0x0b, 0xc7, 0xcd, 0xeb, 0x88, 0x15, 0xaf,
+-      0x5b, 0x8e, 0x59, 0xd2, 0x46, 0x97, 0xd2, 0x4a, 0x7b, 0x8a, 0x3b, 0x4b,
+-      0x41, 0x4e, 0xad, 0x95, 0x44, 0xa2, 0xca, 0x5a, 0x5b, 0xff, 0xad, 0xca,
+-      0xca, 0xd1, 0xe9, 0x6d, 0x77, 0xd1, 0x77, 0x1f, 0x57, 0xf3, 0xf3, 0x7d,
+-      0xde, 0x1e, 0x43, 0x5e, 0x7e, 0x3f, 0xda, 0x53, 0xd2, 0x8e, 0xe8, 0x35,
+-      0xef, 0x6f, 0xed, 0x12, 0x23, 0x2e, 0xc9, 0x9c, 0xe7, 0x1e, 0x97, 0x31,
+-      0x61, 0xc9, 0x7b, 0xf0, 0xe3, 0x7a, 0xe2, 0x47, 0xf4, 0x3f, 0xc4, 0x8f,
+-      0xa5, 0x7f, 0xa2, 0xec, 0x59, 0xca, 0x21, 0x3c, 0x45, 0xe2, 0x9e, 0xf0,
+-      0x16, 0xe1, 0x2b, 0x41, 0xca, 0x25, 0xfc, 0xa5, 0x68, 0x1b, 0x96, 0xf5,
+-      0x4d, 0x73, 0x01, 0x62, 0xb5, 0xfa, 0x20, 0x50, 0x87, 0x41, 0xca, 0xea,
+-      0x48, 0x22, 0xce, 0x71, 0x52, 0xd7, 0xea, 0x75, 0x0e, 0xa8, 0x4d, 0x0e,
+-      0x74, 0xe3, 0x55, 0xd3, 0xe8, 0xdf, 0x8c, 0xbf, 0x44, 0x8f, 0xd7, 0xc2,
+-      0x61, 0x33, 0x48, 0x5c, 0x2a, 0x47, 0x67, 0x13, 0x27, 0x62, 0xad, 0x17,
+-      0x43, 0xa9, 0x78, 0x07, 0x61, 0x83, 0x31, 0xec, 0xd9, 0x4f, 0x26, 0x02,
+-      0x7a, 0xfb, 0x56, 0xa6, 0x40, 0xab, 0x06, 0xdc, 0xf0, 0x4b, 0x2a, 0xc4,
+-      0x98, 0xf1, 0x75, 0xc6, 0xf9, 0x4d, 0xe6, 0x15, 0xd4, 0x6d, 0x1f, 0x6d,
+-      0x48, 0xa5, 0xbd, 0x48, 0x3f, 0x41, 0xf2, 0x19, 0xa9, 0xcb, 0xb8, 0xd0,
+-      0xa0, 0xe0, 0x86, 0x06, 0xda, 0x27, 0x79, 0xd1, 0xe7, 0x43, 0x4e, 0xfb,
+-      0xff, 0x44, 0xb6, 0x31, 0x7a, 0xb3, 0xfa, 0x23, 0x0b, 0x33, 0xed, 0x36,
+-      0xb4, 0xa8, 0x4a, 0xb9, 0xff, 0x28, 0x27, 0x30, 0x21, 0x5c, 0xad, 0xd2,
+-      0xf8, 0x0d, 0xc6, 0xbd, 0x52, 0xa7, 0x0a, 0x15, 0xc3, 0xf1, 0x59, 0xe5,
+-      0xb4, 0xe1, 0xd2, 0x88, 0x8e, 0xbb, 0x46, 0x2b, 0xe1, 0x18, 0xd6, 0x2f,
+-      0xae, 0x74, 0x20, 0x56, 0x22, 0xfc, 0x70, 0xb4, 0x16, 0x35, 0xfb, 0xac,
+-      0x6e, 0x77, 0xc4, 0xb2, 0x3c, 0x4b, 0x22, 0xb8, 0xf7, 0xa8, 0x06, 0x75,
+-      0x9f, 0x0b, 0x15, 0xcc, 0x43, 0xd6, 0x99, 0x7d, 0xb8, 0x8f, 0xfc, 0x6e,
+-      0x4e, 0x32, 0x88, 0xd5, 0xc4, 0xa2, 0x8b, 0xa9, 0xb6, 0xd6, 0x17, 0x12,
+-      0x0d, 0xdb, 0xe6, 0x38, 0x84, 0xfb, 0xaf, 0xc1, 0xe6, 0xec, 0x1a, 0xdc,
+-      0xc9, 0xd8, 0xf9, 0x9c, 0x81, 0xee, 0x39, 0xf4, 0xd7, 0x3b, 0xc9, 0xff,
+-      0x36, 0xa6, 0xd6, 0x61, 0x63, 0x76, 0x1b, 0xff, 0xeb, 0xc0, 0xdd, 0x3c,
+-      0x36, 0xa5, 0xc4, 0xbf, 0x3f, 0x8d, 0x4d, 0xd9, 0x7a, 0xc4, 0x46, 0x37,
+-      0x62, 0x2b, 0x39, 0xc1, 0x5d, 0xa3, 0x5e, 0xea, 0xb6, 0x0d, 0x1b, 0xb2,
+-      0x6d, 0xb8, 0x97, 0x63, 0xb9, 0x97, 0xf3, 0xa1, 0x26, 0xb7, 0xd2, 0xc7,
+-      0x3c, 0xf0, 0x0e, 0x2f, 0xc5, 0x7d, 0xa3, 0xd7, 0x61, 0x0b, 0xe3, 0xe4,
+-      0xed, 0x4b, 0xae, 0x43, 0xf7, 0xe8, 0x7d, 0xe8, 0x4a, 0x19, 0x5d, 0x73,
+-      0x98, 0x6a, 0xbd, 0xb5, 0xe4, 0x3e, 0xdc, 0x43, 0x39, 0xb6, 0xed, 0xb5,
+-      0x50, 0xb6, 0x68, 0xb1, 0x6a, 0xd4, 0xc4, 0x2d, 0x9f, 0x21, 0xb1, 0xf9,
+-      0xc0, 0xad, 0x7d, 0xc6, 0xee, 0x02, 0xb6, 0x38, 0x51, 0x62, 0x28, 0x62,
+-      0xa3, 0xf9, 0xeb, 0x89, 0xbf, 0xc1, 0xe6, 0x51, 0x17, 0xee, 0x18, 0xed,
+-      0x52, 0x56, 0x8b, 0xad, 0xb8, 0x54, 0xce, 0x67, 0x94, 0xd8, 0xd7, 0xaa,
+-      0xb4, 0x8c, 0xda, 0xf3, 0xac, 0x79, 0x23, 0x5d, 0xca, 0xba, 0xec, 0x9d,
+-      0x0e, 0x94, 0xcb, 0x5c, 0x5c, 0x83, 0xf1, 0xa6, 0xaf, 0x58, 0xe9, 0xfc,
+-      0x7c, 0xa6, 0xe9, 0x3e, 0x6e, 0x5f, 0xe4, 0x57, 0x9f, 0xf4, 0x2d, 0xd0,
+-      0xbb, 0x0e, 0xa8, 0xc2, 0x2b, 0xdd, 0xc8, 0xd9, 0xf3, 0x59, 0xc2, 0x7e,
+-      0x6a, 0x70, 0xc4, 0x9b, 0xe7, 0x12, 0xf3, 0xd8, 0x97, 0x95, 0x72, 0x71,
+-      0xac, 0x94, 0x9b, 0xe3, 0x99, 0x93, 0xf4, 0xe1, 0x7e, 0xea, 0xa7, 0x8b,
+-      0x73, 0xd4, 0x45, 0xbd, 0x7c, 0x2e, 0x75, 0x8a, 0x31, 0x62, 0x1b, 0x3e,
+-      0x57, 0xe8, 0xa7, 0x2f, 0x5b, 0x8a, 0x72, 0xa3, 0x0f, 0x8f, 0x68, 0x25,
+-      0xf4, 0x31, 0xe1, 0x19, 0x07, 0x6e, 0x3d, 0x6c, 0xac, 0xe3, 0x18, 0xbe,
+-      0xc4, 0x36, 0x44, 0xae, 0x46, 0xad, 0x06, 0xf9, 0xb2, 0x3d, 0xc4, 0xec,
+-      0x72, 0xe3, 0x37, 0xd6, 0x23, 0xde, 0x76, 0xbb, 0x6c, 0x15, 0xcb, 0x3e,
+-      0x3f, 0xe0, 0xc7, 0x8d, 0xb4, 0xef, 0xb2, 0x64, 0x94, 0x7a, 0x77, 0x93,
+-      0x53, 0xb5, 0x52, 0xe7, 0x9c, 0x63, 0xea, 0xf5, 0x0e, 0xda, 0xb3, 0x33,
+-      0xb9, 0x86, 0xf3, 0xa0, 0xa1, 0x32, 0xd9, 0xc7, 0x79, 0xf0, 0xc2, 0x9d,
+-      0x6c, 0x47, 0x27, 0xe5, 0x72, 0x25, 0xd7, 0x71, 0x2e, 0xea, 0xe0, 0x49,
+-      0x76, 0x70, 0x2e, 0x80, 0xbb, 0xa8, 0xcb, 0xfb, 0x42, 0xbf, 0x56, 0x7a,
+-      0x6b, 0x65, 0x18, 0x6d, 0x9c, 0xbf, 0x28, 0x36, 0xa7, 0xea, 0xc3, 0x3b,
+-      0x24, 0xee, 0x3b, 0x99, 0x90, 0x19, 0x3f, 0x26, 0x17, 0xa6, 0xf5, 0x1b,
+-      0x3d, 0xfc, 0x5d, 0x94, 0xb3, 0x88, 0xe3, 0x22, 0xa7, 0xc4, 0xd7, 0xa2,
+-      0x9c, 0x2e, 0x94, 0x19, 0xcf, 0x5a, 0x0f, 0x7b, 0xe1, 0x77, 0xb1, 0x6c,
+-      0x39, 0xcb, 0xae, 0xa6, 0x9c, 0xab, 0x29, 0xff, 0xbc, 0xe4, 0xa7, 0xd1,
+-      0x4d, 0x39, 0xe7, 0x0c, 0xbb, 0xc9, 0x51, 0x75, 0xdc, 0x4f, 0xdd, 0x1f,
+-      0x48, 0x95, 0xa1, 0x9a, 0xf3, 0xfc, 0x39, 0xfe, 0xde, 0x41, 0x3f, 0x7a,
+-      0x7e, 0xd0, 0xc2, 0x99, 0x90, 0x86, 0x41, 0xad, 0x0c, 0xbd, 0xc1, 0xad,
+-      0xe4, 0xe5, 0x32, 0x57, 0xcc, 0xa7, 0x8c, 0x0a, 0xc6, 0x75, 0xc4, 0x5d,
+-      0xcd, 0x3a, 0xb6, 0x07, 0xdd, 0x48, 0x7b, 0x11, 0x75, 0x19, 0x51, 0xda,
+-      0xb8, 0x0b, 0x03, 0x9a, 0x02, 0x17, 0xf1, 0xb0, 0x94, 0xfe, 0xb4, 0x93,
+-      0x71, 0xd7, 0x15, 0x91, 0xff, 0x68, 0x27, 0xe4, 0x60, 0xd5, 0x11, 0x23,
+-      0xfe, 0x82, 0x12, 0x68, 0x73, 0xa9, 0xf7, 0x51, 0x47, 0x15, 0x38, 0x33,
+-      0xf8, 0x25, 0x6c, 0x64, 0x5f, 0x7d, 0x29, 0x0f, 0x73, 0x93, 0xbf, 0x53,
+-      0x72, 0x36, 0x7e, 0x7a, 0x90, 0x1c, 0x79, 0xdc, 0x9a, 0x67, 0x88, 0xdd,
+-      0x44, 0x70, 0xcf, 0xd1, 0x2a, 0x0c, 0x0e, 0x5e, 0x87, 0x6d, 0x2c, 0xb7,
+-      0x2b, 0x55, 0x0d, 0x63, 0x68, 0x99, 0x5d, 0x67, 0x84, 0xfe, 0x35, 0x90,
+-      0xbc, 0x0f, 0x2b, 0x53, 0xf5, 0xc1, 0xa3, 0x4a, 0x8c, 0x3a, 0xf4, 0xa2,
+-      0x3f, 0xb9, 0xd1, 0xd6, 0x69, 0x62, 0x5f, 0x27, 0xb6, 0x1e, 0xbd, 0x02,
+-      0x7b, 0xf6, 0x6d, 0xc1, 0x5d, 0x47, 0x99, 0xbf, 0xda, 0xb6, 0xac, 0xa2,
+-      0x77, 0xdf, 0x75, 0xca, 0x06, 0xb6, 0xb7, 0x7b, 0x98, 0xf6, 0x4c, 0x9b,
+-      0xbe, 0x7f, 0xaf, 0x91, 0x5b, 0xe6, 0xd8, 0xa2, 0xf8, 0x6b, 0xaf, 0x43,
+-      0x97, 0x6d, 0x7b, 0x79, 0xbd, 0xed, 0xc8, 0xce, 0x67, 0x9e, 0xf3, 0xb7,
+-      0xd6, 0xa3, 0xde, 0x52, 0x7b, 0x7e, 0x55, 0xea, 0xad, 0x25, 0xc1, 0xdc,
+-      0xbf, 0x96, 0xb9, 0x57, 0xc1, 0x5e, 0x7a, 0xb3, 0x8b, 0xc9, 0x1b, 0xbd,
+-      0xc8, 0x68, 0x41, 0xea, 0xa3, 0x38, 0x0f, 0x0d, 0x05, 0x7b, 0x79, 0x8b,
+-      0x65, 0x6c, 0x5b, 0x7e, 0x9f, 0x2f, 0xc8, 0xfc, 0xb6, 0xa3, 0x86, 0xf1,
+-      0x75, 0x43, 0x68, 0x9d, 0x72, 0xaf, 0x76, 0x69, 0xce, 0x7c, 0xc5, 0x39,
+-      0x93, 0x3c, 0xd1, 0x6e, 0x2b, 0xf1, 0x25, 0xdb, 0x76, 0xaf, 0xcf, 0x36,
+-      0xa3, 0x73, 0x74, 0x7a, 0xfb, 0xc5, 0x3a, 0x65, 0x9c, 0x8b, 0xe2, 0x3c,
+-      0xeb, 0xfd, 0x82, 0x65, 0x81, 0x45, 0x45, 0x2c, 0xbb, 0xb3, 0xd0, 0xff,
+-      0x41, 0x8b, 0x31, 0xc9, 0xe9, 0x32, 0x1c, 0x18, 0x09, 0xfe, 0x57, 0x25,
+-      0x5e, 0xeb, 0xa4, 0xcc, 0x0a, 0xb1, 0xe4, 0xef, 0xac, 0x3d, 0xeb, 0x64,
+-      0x5e, 0x3e, 0x42, 0x43, 0x86, 0xe2, 0xba, 0xe4, 0xb3, 0x6b, 0xb0, 0x3e,
+-      0x25, 0xb2, 0xb6, 0x63, 0x43, 0xca, 0x96, 0xcb, 0x5f, 0x94, 0xab, 0x8f,
+-      0x36, 0xa3, 0x25, 0x77, 0xdb, 0x32, 0xb5, 0xd3, 0xae, 0xee, 0xd9, 0xab,
+-      0xe2, 0xe9, 0xd0, 0x26, 0xc5, 0x3f, 0x53, 0xe2, 0x70, 0x3d, 0xba, 0xf6,
+-      0xca, 0xb7, 0x9f, 0x7c, 0x37, 0xa6, 0x4c, 0xcd, 0x1c, 0x60, 0xb9, 0x65,
+-      0x58, 0xbf, 0xb7, 0x16, 0x73, 0x38, 0xd6, 0xdb, 0xcd, 0xff, 0xa2, 0xbc,
+-      0x33, 0x43, 0xc6, 0xb3, 0xa2, 0x10, 0xcb, 0xeb, 0x71, 0xdf, 0x5e, 0xf1,
+-      0x21, 0xf9, 0xdd, 0x82, 0xde, 0xa5, 0xf5, 0x85, 0x38, 0xff, 0x37, 0x9c,
+-      0x97, 0x2e, 0xe5, 0x06, 0xe2, 0x42, 0x8c, 0xb8, 0x40, 0x9b, 0x52, 0xda,
+-      0x89, 0x0b, 0xd7, 0x17, 0x70, 0xc1, 0x43, 0x5c, 0x58, 0x93, 0x7d, 0x9b,
+-      0xf2, 0x88, 0x2f, 0xbe, 0x57, 0x9e, 0xbb, 0x29, 0xcf, 0xb1, 0xd0, 0x1c,
+-      0xc0, 0x96, 0x67, 0x19, 0x79, 0x4c, 0x2d, 0xe7, 0xd0, 0x62, 0x7c, 0x50,
+-      0x94, 0x11, 0x5b, 0xcf, 0xcb, 0x28, 0xb3, 0xd8, 0x94, 0x45, 0xb9, 0x7f,
+-      0x8f, 0x06, 0x7b, 0x7d, 0xe0, 0xb2, 0x3c, 0xeb, 0xf7, 0xbe, 0xcb, 0x1c,
+-      0x41, 0x7e, 0x13, 0x2f, 0x9a, 0xeb, 0x89, 0x73, 0xcb, 0x88, 0x7b, 0x2e,
+-      0x8e, 0x4b, 0xb0, 0x4e, 0x64, 0x73, 0xd1, 0x2f, 0xa4, 0x6d, 0xd1, 0xc9,
+-      0x52, 0x47, 0x7e, 0x1e, 0x8a, 0xf3, 0xec, 0xa4, 0x1f, 0xbb, 0x51, 0x1d,
+-      0xd1, 0xa3, 0x37, 0x39, 0x64, 0xce, 0x88, 0xf2, 0x43, 0xed, 0x85, 0xbe,
+-      0xfe, 0xbb, 0xd2, 0x50, 0xd3, 0x4f, 0x39, 0x4f, 0x28, 0xb7, 0x70, 0x5c,
+-      0xfe, 0xd2, 0xaa, 0xa8, 0x27, 0x12, 0xe8, 0x48, 0xbc, 0x2f, 0x36, 0xde,
+-      0x90, 0xcd, 0xf3, 0x4b, 0x75, 0x28, 0x6e, 0x95, 0xd3, 0xf6, 0x9d, 0x46,
+-      0xe0, 0xe2, 0x6a, 0xf6, 0x30, 0xef, 0xa0, 0xf0, 0x19, 0x93, 0x6d, 0x15,
+-      0xfb, 0xaa, 0x23, 0x96, 0x84, 0x0a, 0x76, 0xb0, 0x46, 0x61, 0xde, 0xd0,
+-      0x16, 0xb5, 0xed, 0x61, 0x17, 0xf5, 0x75, 0x42, 0xf9, 0x98, 0x70, 0x66,
+-      0x9b, 0x63, 0xc4, 0x95, 0x55, 0xc4, 0x95, 0xea, 0xa4, 0x12, 0xf5, 0x46,
+-      0x1a, 0xb7, 0xd5, 0x20, 0xd0, 0xf6, 0x28, 0xfb, 0xac, 0x21, 0xcf, 0xbc,
+-      0x89, 0xb1, 0x36, 0xc9, 0x3e, 0x57, 0xb1, 0xcf, 0xb5, 0xd9, 0x2d, 0x6c,
+-      0x57, 0xb0, 0x55, 0xc5, 0x9c, 0x7d, 0x70, 0x7b, 0x69, 0x07, 0x23, 0x0d,
+-      0x4e, 0x84, 0x17, 0xff, 0x02, 0x98, 0x81, 0x98, 0xca, 0xfc, 0x7d, 0x5e,
+-      0x52, 0x72, 0xa9, 0x03, 0xb7, 0x2e, 0xcb, 0x08, 0x96, 0x6a, 0xf0, 0x0c,
+-      0x7b, 0x25, 0x1e, 0xa1, 0x2f, 0x54, 0xa7, 0xec, 0xb1, 0xf1, 0x56, 0x45,
+-      0xd9, 0x3e, 0x05, 0x57, 0x85, 0xbe, 0xae, 0xa4, 0x67, 0xe6, 0x31, 0x5f,
+-      0xa5, 0x3e, 0x7a, 0x26, 0x04, 0x1b, 0xd3, 0xc4, 0xc6, 0x63, 0x4a, 0x7e,
+-      0x3d, 0x86, 0x7e, 0x9f, 0x42, 0xbc, 0x2a, 0x22, 0x6b, 0x20, 0x81, 0xce,
+-      0x0f, 0x29, 0xf7, 0x11, 0x0b, 0x5d, 0x8c, 0x43, 0x1e, 0x62, 0xa3, 0xc4,
+-      0xe9, 0xf4, 0xad, 0x89, 0x81, 0x3a, 0xf4, 0xd3, 0xb7, 0x37, 0x1e, 0x3d,
+-      0x75, 0x8b, 0x07, 0xb5, 0xfc, 0xf6, 0xf2, 0x98, 0xc5, 0xc3, 0x4d, 0x5f,
+-      0x76, 0xc3, 0x31, 0x20, 0x7c, 0xaf, 0x89, 0xb1, 0xca, 0x83, 0xf2, 0x01,
+-      0x13, 0x5b, 0x28, 0x4f, 0xe9, 0x50, 0x33, 0xe3, 0x09, 0xfd, 0x3c, 0x55,
+-      0x83, 0xeb, 0x07, 0x97, 0x60, 0x93, 0x8d, 0x5f, 0xb5, 0x38, 0x3b, 0xb8,
+-      0xd4, 0xc6, 0x8d, 0x87, 0x52, 0x33, 0xf0, 0xce, 0xde, 0x6b, 0x6c, 0x8c,
+-      0x1b, 0x64, 0x6c, 0xf6, 0xed, 0x0b, 0xa3, 0x8b, 0x6d, 0x7a, 0xf7, 0x5d,
+-      0x8b, 0xfb, 0x8e, 0xfa, 0xa8, 0x23, 0x83, 0x71, 0x40, 0x7d, 0xd7, 0xff,
+-      0x49, 0xb1, 0xf3, 0xe9, 0xd8, 0x2f, 0x73, 0x2d, 0x75, 0x32, 0x34, 0x56,
+-      0xf9, 0xed, 0xb4, 0xb9, 0x70, 0x5e, 0x47, 0x79, 0x9d, 0x5c, 0x4d, 0x9d,
+-      0xdc, 0x94, 0xa5, 0x39, 0x0c, 0x3b, 0x39, 0xd7, 0xe4, 0x10, 0x35, 0xb5,
+-      0xf4, 0xcb, 0x12, 0x1e, 0xb4, 0xff, 0xd1, 0xbf, 0x60, 0x6c, 0xcf, 0x71,
+-      0x3e, 0xf9, 0xdb, 0x94, 0xf9, 0x94, 0xf8, 0xe9, 0x20, 0xe6, 0x2a, 0xd4,
+-      0xef, 0xff, 0x02, 0x66, 0xe7, 0x73, 0x9b, 0xa2, 0xae, 0x54, 0x8e, 0xbf,
+-      0x25, 0x91, 0xb3, 0x39, 0x3d, 0x33, 0x22, 0x5d, 0xe5, 0x7f, 0x1b, 0x8f,
+-      0x92, 0x73, 0x27, 0xc5, 0x67, 0xbd, 0xb4, 0xe7, 0x26, 0xea, 0x4b, 0x63,
+-      0xec, 0x30, 0x89, 0x73, 0xb3, 0xe0, 0xe2, 0x38, 0x36, 0x51, 0x3f, 0x1e,
+-      0x8e, 0x63, 0x2b, 0xcb, 0xdd, 0xc5, 0xff, 0xee, 0x3a, 0x5a, 0xcb, 0xc3,
+-      0xcb, 0x63, 0x16, 0x8f, 0x9f, 0x12, 0xb3, 0x9a, 0x69, 0xc7, 0x0e, 0x94,
+-      0x0c, 0xab, 0x78, 0xca, 0x54, 0x70, 0xa1, 0x89, 0xfd, 0x35, 0x5c, 0xc6,
+-      0x3a, 0x89, 0x65, 0xde, 0xe4, 0x97, 0x88, 0x73, 0x7e, 0xac, 0x23, 0x27,
+-      0xe8, 0xdc, 0xab, 0xc1, 0x15, 0xca, 0x30, 0x67, 0x12, 0x19, 0x4e, 0x14,
+-      0x38, 0xe6, 0x3c, 0xe6, 0x3a, 0x8d, 0x61, 0xda, 0x90, 0xb6, 0xd9, 0xb6,
+-      0xa1, 0x38, 0xe3, 0x73, 0x90, 0xb9, 0x7e, 0xde, 0x76, 0x5b, 0xde, 0x63,
+-      0x47, 0xf4, 0x31, 0x8e, 0x67, 0x4e, 0x44, 0xf7, 0xdf, 0x42, 0x5f, 0x10,
+-      0xce, 0x57, 0x9a, 0x04, 0x0e, 0x0c, 0xb6, 0xa3, 0x9a, 0x36, 0xe3, 0x5d,
+-      0x7c, 0x14, 0xa9, 0xda, 0x7e, 0xdb, 0x56, 0xf3, 0x6d, 0x97, 0x45, 0x2b,
+-      0x23, 0x8d, 0x31, 0x69, 0x7b, 0xbc, 0xd0, 0xf6, 0x0a, 0xb6, 0x9d, 0x60,
+-      0xdb, 0x2b, 0xff, 0x5d, 0xdb, 0xd3, 0xe3, 0x5d, 0x4f, 0x21, 0x2e, 0x4b,
+-      0xde, 0x5c, 0xc4, 0xed, 0x22, 0xc7, 0xf8, 0x8d, 0xf7, 0x32, 0x4e, 0xee,
+-      0x90, 0xb9, 0xf3, 0xe5, 0x7d, 0xf6, 0xbd, 0xd8, 0x7c, 0xb9, 0xad, 0x3d,
+-      0xc5, 0x18, 0x6f, 0xd6, 0x4c, 0x6b, 0x6b, 0x0e, 0xff, 0xff, 0x70, 0x4a,
+-      0xb8, 0x44, 0x3b, 0x2c, 0xca, 0xfa, 0xac, 0xa1, 0x77, 0x2d, 0x73, 0x18,
+-      0xdb, 0x2e, 0x32, 0xd7, 0xb9, 0xf1, 0x52, 0x5f, 0xb2, 0x36, 0xd2, 0x8e,
+-      0x85, 0x03, 0x7a, 0xe7, 0x2e, 0xf2, 0xd1, 0xc3, 0x21, 0x3d, 0xfa, 0x2d,
+-      0xe8, 0xf1, 0x52, 0xe5, 0x25, 0x94, 0x4c, 0x9c, 0xc5, 0x60, 0xf6, 0x47,
+-      0x92, 0x6f, 0xb2, 0x4d, 0xb7, 0xe2, 0x99, 0xe8, 0x43, 0x8c, 0xf5, 0xdc,
+-      0xac, 0xe7, 0x1e, 0x80, 0xbb, 0x92, 0xf5, 0xc6, 0x07, 0xe2, 0x96, 0x8b,
+-      0x5c, 0x50, 0x8d, 0xe8, 0x1d, 0x95, 0x8a, 0x11, 0xdb, 0xc4, 0xb6, 0xd7,
+-      0x30, 0x96, 0x95, 0x27, 0xbb, 0xc9, 0x03, 0x74, 0xdf, 0x97, 0x55, 0xbd,
+-      0x6b, 0x3d, 0x5e, 0xc2, 0xbf, 0x92, 0x3c, 0xce, 0x4b, 0x9e, 0x45, 0x8a,
+-      0xed, 0x59, 0xe3, 0x1a, 0xf9, 0xcc, 0xbb, 0x56, 0x78, 0x41, 0x85, 0x53,
+-      0xda, 0xbd, 0x38, 0xbe, 0xe0, 0xdd, 0xc4, 0x65, 0x3c, 0xd7, 0x5c, 0x46,
+-      0xe3, 0xfb, 0xf0, 0xa9, 0xa9, 0x75, 0x45, 0x62, 0xfd, 0x56, 0x57, 0x64,
+-      0xdb, 0xfd, 0xc7, 0x9b, 0xf3, 0x76, 0xeb, 0xcf, 0xb8, 0x71, 0xd6, 0x2b,
+-      0xbe, 0xc4, 0xfc, 0x67, 0x7f, 0x13, 0x76, 0xef, 0x67, 0x5e, 0xa9, 0x36,
+-      0x86, 0xcb, 0x95, 0x1a, 0xe6, 0x44, 0xc3, 0x36, 0x1f, 0x76, 0x1a, 0xbb,
+-      0xec, 0x9c, 0x59, 0xe2, 0x83, 0xd4, 0x99, 0x9f, 0x91, 0xf8, 0x27, 0xeb,
+-      0x39, 0x07, 0x6e, 0xdd, 0x90, 0xa0, 0xdf, 0x6a, 0xbd, 0x2c, 0xb3, 0xae,
+-      0xb0, 0x4e, 0x2f, 0x6b, 0x18, 0xbd, 0xd3, 0x38, 0xc9, 0xba, 0x69, 0xb1,
+-      0xaa, 0xd1, 0x5f, 0x73, 0x29, 0x8e, 0x74, 0x14, 0xca, 0x33, 0xd9, 0xb3,
+-      0x65, 0x73, 0x4f, 0xc3, 0xb3, 0x1d, 0xbc, 0x96, 0xf7, 0x85, 0xcb, 0xf1,
+-      0x6e, 0x67, 0x61, 0x6e, 0x0e, 0xb9, 0xf2, 0xb8, 0xff, 0x69, 0x77, 0x71,
+-      0xbd, 0x28, 0x5f, 0xe6, 0xda, 0x12, 0x94, 0xef, 0xb9, 0x14, 0x5b, 0xe2,
+-      0xc4, 0xf2, 0x6d, 0x7b, 0xf3, 0xeb, 0x93, 0x95, 0x4b, 0x05, 0xb7, 0xeb,
+-      0x71, 0xb7, 0xed, 0xf7, 0x5f, 0x75, 0xe5, 0xed, 0xc0, 0x59, 0x18, 0x97,
+-      0x49, 0x1b, 0xbc, 0x52, 0xd6, 0xfc, 0x0b, 0xf8, 0x39, 0x9b, 0xff, 0xf7,
+-      0x42, 0xe6, 0xc2, 0x45, 0xff, 0x7c, 0xdc, 0x74, 0x60, 0x6a, 0x46, 0x9e,
+-      0xaf, 0xab, 0xfb, 0x9a, 0xd0, 0x33, 0x46, 0xbc, 0xa1, 0x0f, 0xb5, 0x85,
+-      0xd6, 0x5a, 0xa8, 0x91, 0x75, 0x83, 0x5a, 0x54, 0xec, 0x13, 0xde, 0x4c,
+-      0x9e, 0x31, 0x76, 0xca, 0x1e, 0x4b, 0x6f, 0x26, 0xbf, 0x2e, 0xb2, 0x33,
+-      0xd5, 0xf7, 0xee, 0x1d, 0x9a, 0xe0, 0x85, 0xd8, 0x46, 0xdd, 0xad, 0x0b,
+-      0x03, 0x39, 0xbf, 0x03, 0xba, 0xb9, 0x4b, 0x56, 0x92, 0x12, 0xb7, 0x61,
+-      0x7b, 0xad, 0x82, 0x2e, 0xa3, 0x1a, 0x8e, 0xc5, 0xbf, 0xb5, 0xee, 0x58,
+-      0x27, 0xff, 0xbd, 0x5b, 0xc0, 0x97, 0x0f, 0xb2, 0x6f, 0x19, 0xb7, 0x70,
+-      0x3a, 0x37, 0x2a, 0xe8, 0x53, 0x37, 0x38, 0x84, 0x73, 0x2a, 0x8c, 0x9d,
+-      0xf6, 0x5c, 0xa0, 0x37, 0xad, 0x60, 0x77, 0x5a, 0x30, 0xd3, 0x49, 0x1c,
+-      0xf4, 0x61, 0x67, 0x5a, 0x70, 0xd0, 0x45, 0x1c, 0x9c, 0x83, 0xed, 0x69,
+-      0xc1, 0xc1, 0x12, 0xbc, 0x3c, 0x78, 0x05, 0x1e, 0xe2, 0xef, 0x07, 0x53,
+-      0xa5, 0x08, 0xef, 0xfd, 0x0b, 0x1c, 0x48, 0x0b, 0x7f, 0x72, 0x23, 0x35,
+-      0x5c, 0x87, 0x54, 0x3a, 0xcf, 0x25, 0xaa, 0x86, 0xff, 0x12, 0x49, 0xfe,
+-      0x1e, 0x20, 0xef, 0xcb, 0x0c, 0xcd, 0x45, 0x82, 0xbf, 0x65, 0xbd, 0xcd,
+-      0x43, 0xf9, 0x13, 0x81, 0x0a, 0x6c, 0x18, 0x92, 0x1c, 0xda, 0x77, 0xeb,
+-      0x5d, 0x81, 0x79, 0xec, 0xb3, 0x0e, 0xbb, 0xc9, 0xd9, 0xda, 0x86, 0xfc,
+-      0xe8, 0xe7, 0xef, 0x9d, 0xa9, 0x4a, 0xbc, 0x36, 0xa8, 0xdb, 0xfd, 0xf5,
+-      0xa4, 0x56, 0xac, 0x70, 0x19, 0x55, 0x58, 0x31, 0x38, 0x1f, 0x3b, 0xd2,
+-      0x82, 0xbd, 0xd5, 0xc4, 0xde, 0x7a, 0x3c, 0x98, 0x16, 0x7e, 0xa9, 0xc1,
+-      0xbb, 0xd7, 0xc0, 0x48, 0x5a, 0xd6, 0x84, 0x6b, 0x70, 0x61, 0x28, 0x80,
+-      0x41, 0xbb, 0x7f, 0x13, 0xc9, 0x54, 0x98, 0xf2, 0x79, 0x51, 0xb9, 0x2f,
+-      0xe7, 0xab, 0x82, 0x82, 0xc9, 0x40, 0x10, 0x03, 0x63, 0xb3, 0x50, 0xbe,
+-      0x4f, 0x37, 0xb7, 0x42, 0xbf, 0x78, 0x17, 0xae, 0xc4, 0xee, 0x31, 0x1f,
+-      0x4a, 0xf7, 0x55, 0xc3, 0x1d, 0x6a, 0xc2, 0xce, 0xb1, 0x0f, 0x61, 0xfb,
+-      0x58, 0x1d, 0xb1, 0x13, 0x78, 0x3a, 0x63, 0xa2, 0x9f, 0x18, 0x3c, 0x87,
+-      0x31, 0xe6, 0x95, 0xac, 0xcc, 0xa3, 0xcc, 0x8f, 0x02, 0x4f, 0xa0, 0x9a,
+-      0x31, 0x4a, 0x7e, 0xcb, 0xb5, 0xb0, 0x8d, 0xed, 0xf9, 0x75, 0x2a, 0x3d,
+-      0xbe, 0x13, 0xb6, 0xbe, 0x91, 0xcb, 0x88, 0xee, 0x65, 0x4d, 0x68, 0xba,
+-      0x3d, 0xed, 0xb4, 0xd7, 0xe8, 0x2f, 0xdb, 0xe5, 0x5f, 0x15, 0xec, 0xd2,
+-      0x5e, 0x53, 0xc3, 0x93, 0x97, 0xf2, 0x5c, 0xb4, 0x96, 0x20, 0x60, 0x3a,
+-      0x15, 0xf8, 0x99, 0xef, 0xfa, 0x9f, 0x7a, 0xdf, 0xda, 0xda, 0xe5, 0xf5,
+-      0x9f, 0xe9, 0x6b, 0xb0, 0x72, 0x6f, 0x49, 0x65, 0x3c, 0x2f, 0x41, 0x5c,
+-      0x93, 0x35, 0xaa, 0x46, 0x8d, 0x5a, 0x79, 0x5f, 0xde, 0x5d, 0x15, 0x2b,
+-      0x8b, 0x34, 0xc3, 0x3f, 0x5e, 0xe7, 0x7f, 0x2d, 0x21, 0x3a, 0xfd, 0xbd,
+-      0xe5, 0x36, 0x0c, 0xdf, 0x31, 0xd4, 0xf9, 0x7f, 0x92, 0x79, 0xbb, 0x04,
+-      0x55, 0x1e, 0x5c, 0x9f, 0xf8, 0xe0, 0x7a, 0x6a, 0x04, 0xca, 0xca, 0x66,
+-      0x1f, 0x79, 0x3f, 0x9c, 0xab, 0x17, 0x60, 0xda, 0x87, 0x7c, 0x24, 0x02,
+-      0xf5, 0x74, 0x73, 0x98, 0xb9, 0x7e, 0xfe, 0x7e, 0xce, 0xf2, 0xac, 0xee,
+-      0x8b, 0x2a, 0xf9, 0x7b, 0x36, 0x9d, 0xa1, 0x3f, 0xd0, 0xae, 0xbb, 0x85,
+-      0xb3, 0xb0, 0x2f, 0x60, 0x6b, 0xc2, 0xb2, 0x9e, 0xa4, 0x0e, 0xe4, 0x5e,
+-      0xe0, 0x9b, 0x99, 0xdf, 0x59, 0x93, 0x5e, 0x27, 0x5e, 0x37, 0xa6, 0xb7,
+-      0x47, 0xae, 0x17, 0x31, 0x19, 0xfb, 0xec, 0x13, 0x75, 0xdc, 0x68, 0xdc,
+-      0x76, 0x98, 0x79, 0xf2, 0xc2, 0x80, 0xee, 0x4f, 0xe2, 0xff, 0x5a, 0xc2,
+-      0x0b, 0xd3, 0x4a, 0x71, 0xdd, 0xee, 0xfd, 0x6b, 0x27, 0x55, 0x31, 0x17,
+-      0xc7, 0x77, 0x28, 0xa1, 0xf7, 0xc7, 0x99, 0xb7, 0x45, 0xbd, 0x88, 0x39,
+-      0x23, 0x75, 0xfe, 0x9d, 0x09, 0x7b, 0x9c, 0xe6, 0x79, 0xce, 0xdd, 0xe9,
+-      0xe6, 0x3a, 0x7f, 0x6f, 0x46, 0x6c, 0x50, 0xe1, 0x58, 0x9a, 0xf1, 0x70,
+-      0x46, 0xc5, 0x9d, 0x0f, 0x78, 0xb1, 0x69, 0xc0, 0x83, 0x6d, 0x03, 0x5f,
+-      0x82, 0x71, 0x95, 0x13, 0x77, 0x30, 0xf7, 0xdb, 0x3c, 0x50, 0x4a, 0x3d,
+-      0x6a, 0xd8, 0x32, 0xe0, 0x44, 0xd3, 0x55, 0x55, 0x88, 0xcf, 0x2c, 0xc5,
+-      0xf3, 0xf4, 0xdd, 0xab, 0x42, 0x15, 0x48, 0xdb, 0x9c, 0x43, 0xb0, 0x41,
+-      0x78, 0x9b, 0xe8, 0x8d, 0x71, 0xd0, 0x10, 0x0c, 0xf9, 0xa0, 0xf5, 0x99,
+-      0xdf, 0x58, 0xb9, 0x99, 0x7b, 0x6c, 0x3e, 0xe9, 0x88, 0x88, 0x6e, 0xa4,
+-      0xae, 0xac, 0x35, 0x79, 0x19, 0x23, 0xdf, 0xa3, 0x47, 0x65, 0x5e, 0x24,
+-      0x30, 0xb9, 0x4c, 0x71, 0x20, 0x1c, 0xa8, 0x8a, 0x55, 0x47, 0xc2, 0x58,
+-      0x99, 0xed, 0xf1, 0xf9, 0xec, 0x7b, 0x59, 0x11, 0x9c, 0x5f, 0x62, 0xe2,
+-      0x96, 0x2c, 0x9c, 0x2b, 0xa9, 0xfb, 0x56, 0xea, 0x75, 0x87, 0xf9, 0x07,
+-      0x2b, 0x9f, 0xd7, 0xb8, 0x89, 0x97, 0x96, 0xb5, 0x99, 0xfa, 0x65, 0x4e,
+-      0x81, 0x9f, 0x16, 0xf4, 0x2b, 0x3a, 0xad, 0x18, 0xff, 0x9d, 0x75, 0x9a,
+-      0xfa, 0x75, 0xb3, 0x3d, 0x37, 0xdb, 0x2b, 0x1b, 0x7f, 0xaf, 0x9e, 0x4b,
+-      0x29, 0xcf, 0x4a, 0x5b, 0x86, 0xd9, 0x72, 0x2f, 0xc0, 0x1f, 0x55, 0x8a,
+-      0x3c, 0xf4, 0x4f, 0x8d, 0xe9, 0x25, 0x7b, 0xbd, 0xed, 0xeb, 0x59, 0xcb,
+-      0x1a, 0x36, 0x45, 0xff, 0x7e, 0xea, 0x5f, 0xd6, 0x5d, 0x64, 0x0e, 0x9a,
+-      0x10, 0xad, 0xd5, 0xfb, 0x01, 0x49, 0x7c, 0x15, 0xcc, 0x60, 0xae, 0xf5,
+-      0x8d, 0x76, 0x0f, 0x5e, 0x4b, 0x54, 0xda, 0xe3, 0xbe, 0xaa, 0xc1, 0xb2,
+-      0xbe, 0x16, 0xf2, 0xe3, 0x4d, 0xa3, 0x31, 0xbc, 0x48, 0xd5, 0x19, 0x13,
+-      0x64, 0xed, 0x83, 0xba, 0x48, 0xcd, 0xe5, 0x7c, 0x89, 0xcf, 0x63, 0x1b,
+-      0xed, 0xc9, 0xef, 0x88, 0x00, 0xaf, 0x26, 0x8c, 0xe0, 0x0e, 0xf6, 0x3f,
+-      0xea, 0x8d, 0x60, 0x7b, 0x4a, 0x6d, 0x75, 0x92, 0x7c, 0x96, 0x31, 0xd7,
+-      0xdb, 0x85, 0x7f, 0xb5, 0xd2, 0x5e, 0x0b, 0x25, 0x21, 0x89, 0x25, 0xf3,
+-      0x70, 0x46, 0x73, 0xe0, 0x99, 0xe0, 0x2c, 0x44, 0x6b, 0x1c, 0xe4, 0x33,
+-      0xaf, 0x5b, 0xff, 0xec, 0x95, 0x7e, 0x64, 0x2c, 0x7f, 0xe0, 0x38, 0x14,
+-      0x1b, 0xef, 0x76, 0xa6, 0x22, 0xd4, 0xf7, 0xfb, 0xfb, 0xff, 0xbf, 0xd6,
+-      0x94, 0x57, 0xfa, 0xd7, 0x35, 0x3f, 0xf9, 0xf9, 0xe3, 0x1f, 0xb8, 0xce,
+-      0x12, 0xe4, 0x78, 0xbf, 0x67, 0x7d, 0xc7, 0x6e, 0xf3, 0x23, 0xa5, 0x79,
+-      0x5e, 0x2f, 0xed, 0x3d, 0xcd, 0xf1, 0x49, 0x9b, 0xc5, 0x7e, 0x44, 0x6f,
+-      0x93, 0xa5, 0x82, 0xd7, 0x3b, 0x53, 0xa2, 0x3f, 0xc9, 0x97, 0x4e, 0x5b,
+-      0x98, 0x25, 0xe7, 0x0f, 0xdb, 0x65, 0xe3, 0xd4, 0x57, 0x0f, 0x6d, 0x88,
+-      0xb1, 0x81, 0xf1, 0x42, 0xee, 0xb2, 0x6a, 0xc4, 0x5c, 0x0b, 0xdb, 0x19,
+-      0xb2, 0xd2, 0xde, 0x6a, 0xec, 0x34, 0x69, 0x77, 0x86, 0x3a, 0xdf, 0x09,
+-      0x0b, 0xa7, 0x4d, 0x39, 0x77, 0x61, 0xca, 0xeb, 0xc0, 0x2e, 0xd3, 0x89,
+-      0x4e, 0x43, 0xd5, 0xe5, 0xba, 0x23, 0x24, 0xe7, 0x2e, 0xf8, 0x67, 0x2a,
+-      0xd8, 0x13, 0x56, 0xb1, 0xc5, 0xe8, 0xf1, 0xcb, 0xf5, 0xe5, 0x21, 0x39,
+-      0x57, 0xb0, 0x91, 0x3a, 0x89, 0x33, 0x57, 0xde, 0xca, 0x76, 0x7b, 0x43,
+-      0xf9, 0x75, 0xf1, 0x18, 0x2c, 0x6b, 0x8f, 0xd9, 0xf2, 0xe1, 0x0a, 0x96,
+-      0x3b, 0x67, 0x4a, 0xec, 0x38, 0x70, 0xcb, 0xc2, 0x40, 0x3c, 0x5a, 0x02,
+-      0x3d, 0x56, 0x46, 0x3f, 0xdd, 0x39, 0x30, 0x8f, 0xf5, 0x04, 0xfb, 0x9d,
+-      0xbe, 0xdd, 0x90, 0xf5, 0xae, 0x80, 0xff, 0x27, 0xe4, 0xde, 0x69, 0xef,
+-      0x02, 0x6a, 0xd6, 0xf0, 0xbf, 0xc2, 0x79, 0xab, 0x36, 0x9c, 0xdb, 0x5e,
+-      0x80, 0xde, 0x59, 0xa6, 0x2c, 0x08, 0x56, 0xc1, 0x85, 0x38, 0xf9, 0xf9,
+-      0xd8, 0x38, 0xf3, 0xeb, 0x94, 0xa1, 0x1d, 0xb1, 0xd7, 0xcc, 0x3d, 0xd4,
+-      0x85, 0x87, 0xf1, 0x22, 0xa0, 0x4d, 0x2a, 0xc5, 0xf3, 0x79, 0x82, 0x0d,
+-      0x31, 0x47, 0x44, 0xf0, 0x2d, 0x6e, 0x3d, 0xd1, 0x4c, 0xd5, 0x19, 0x6e,
+-      0x7f, 0x2c, 0xe3, 0xe1, 0xa1, 0xf1, 0xf0, 0xfa, 0x37, 0x65, 0x7c, 0xfe,
+-      0x8d, 0x19, 0xf8, 0xd7, 0x67, 0x8a, 0x76, 0x59, 0xf4, 0x6d, 0xc1, 0x36,
+-      0xcb, 0x92, 0x7b, 0xc9, 0x8f, 0x67, 0xa5, 0xad, 0x7c, 0x1c, 0x2b, 0xa1,
+-      0xec, 0x4f, 0xd2, 0xd6, 0x5d, 0x8c, 0x55, 0xbb, 0x8c, 0x38, 0xa1, 0xd2,
+-      0xb2, 0x0c, 0xf2, 0x99, 0x12, 0xc5, 0x8f, 0x9d, 0x4d, 0xbf, 0xe5, 0x7c,
+-      0x02, 0x9b, 0x32, 0x01, 0x77, 0x7e, 0x3e, 0xc4, 0xcf, 0x04, 0x03, 0xfc,
+-      0x8c, 0xbf, 0x3e, 0x7f, 0x0f, 0xfb, 0xd9, 0x9e, 0x99, 0xee, 0x03, 0x0a,
+-      0x56, 0xb3, 0xad, 0x96, 0x10, 0x9c, 0x2b, 0x9a, 0xfe, 0xcd, 0xca, 0x79,
+-      0xa7, 0xdf, 0x37, 0x75, 0x33, 0xe6, 0xc2, 0xb9, 0xbe, 0x49, 0xce, 0x15,
+-      0xb4, 0x84, 0xe5, 0x5c, 0xc1, 0x7a, 0x43, 0xce, 0x89, 0xd9, 0x59, 0x39,
+-      0xb7, 0xac, 0xcb, 0xe7, 0xef, 0xc7, 0x22, 0x13, 0x77, 0xa5, 0x64, 0xed,
+-      0x4d, 0xb0, 0xc8, 0xed, 0xff, 0x4e, 0xa6, 0x09, 0x5b, 0x52, 0x72, 0x7f,
+-      0x8c, 0xb9, 0x86, 0xe1, 0xf1, 0x3f, 0x93, 0xb9, 0x16, 0x77, 0xee, 0x0f,
+-      0xa3, 0x73, 0x3f, 0x9a, 0xca, 0x38, 0x86, 0xd2, 0x50, 0xc0, 0x7f, 0x14,
+-      0x9a, 0xff, 0x0c, 0x75, 0x72, 0x8a, 0x72, 0x9e, 0x7e, 0x8f, 0x9c, 0xa2,
+-      0x43, 0xf8, 0xef, 0x4e, 0xb8, 0x91, 0x09, 0xbd, 0x63, 0xc5, 0xed, 0x5c,
+-      0xc8, 0xeb, 0xbf, 0x27, 0xe1, 0x47, 0xce, 0xce, 0xc9, 0xde, 0x28, 0x15,
+-      0xec, 0xee, 0x4b, 0xc5, 0xa3, 0x2a, 0x8a, 0xf3, 0xab, 0x87, 0x65, 0x6e,
+-      0x5f, 0x4d, 0xc8, 0x7f, 0xd1, 0x2f, 0xa9, 0x8c, 0x4b, 0x2a, 0x73, 0xf9,
+-      0x41, 0x59, 0xdf, 0x57, 0x4b, 0x45, 0x3f, 0x72, 0x8f, 0x22, 0x2e, 0x39,
+-      0x63, 0x13, 0xaf, 0x6b, 0x8b, 0x10, 0xab, 0xa1, 0x9e, 0xca, 0x0d, 0xaf,
+-      0xbf, 0x71, 0xc2, 0xe7, 0x37, 0x27, 0xe0, 0xbf, 0x72, 0x62, 0xba, 0x08,
+-      0xe4, 0x0a, 0xea, 0x07, 0x61, 0x81, 0xd7, 0xbf, 0x39, 0x31, 0x8f, 0x3c,
+-      0x33, 0x6e, 0x2d, 0x6f, 0x3e, 0x6f, 0xcd, 0x8b, 0x18, 0xb9, 0xd3, 0x94,
+-      0xe1, 0x9d, 0x6b, 0xf4, 0xf8, 0x1c, 0xc7, 0xa9, 0xfb, 0xb5, 0x69, 0x7d,
+-      0x5c, 0x08, 0xfd, 0xff, 0xed, 0xa3, 0x18, 0xe7, 0x68, 0x0f, 0xcd, 0x32,
+-      0x06, 0x89, 0x77, 0xcc, 0x85, 0x6a, 0x65, 0x2c, 0x81, 0x02, 0x6f, 0x2b,
+-      0x8e, 0x4b, 0xe1, 0x5c, 0xbb, 0xa9, 0x8b, 0x62, 0x0c, 0xb3, 0xac, 0x5e,
+-      0xc3, 0x57, 0x58, 0x03, 0xe7, 0x9c, 0x65, 0x4f, 0x7d, 0xd8, 0xc9, 0x9c,
+-      0xfd, 0x9c, 0xd9, 0xf2, 0x57, 0x4e, 0x44, 0x7d, 0xa5, 0x8c, 0xad, 0xb2,
+-      0xf6, 0x74, 0xa6, 0x69, 0xca, 0x9a, 0x64, 0x1e, 0xd4, 0x92, 0x95, 0xfb,
+-      0x4b, 0x0e, 0xda, 0xb7, 0x85, 0x87, 0x4d, 0xf9, 0x5f, 0x70, 0x26, 0x1e,
+-      0x73, 0xd0, 0x56, 0xdc, 0x86, 0xde, 0xf1, 0x65, 0xa5, 0x8a, 0xae, 0xec,
+-      0x0c, 0x4e, 0x42, 0x0f, 0x6f, 0x51, 0xe8, 0x87, 0x35, 0x0b, 0x4c, 0x99,
+-      0x82, 0x37, 0x12, 0x01, 0x33, 0x50, 0x88, 0x4b, 0xe7, 0x38, 0x77, 0x6f,
+-      0x25, 0x8c, 0xce, 0x27, 0x0b, 0xe7, 0x3f, 0xcb, 0x4c, 0x5f, 0x1f, 0x17,
+-      0x7b, 0x74, 0xbb, 0xb7, 0x27, 0x70, 0xc1, 0xd1, 0x8c, 0x0b, 0x87, 0xcc,
+-      0x12, 0x2c, 0x6f, 0x17, 0x3b, 0x75, 0xbb, 0x77, 0x26, 0x30, 0xe5, 0xe4,
+-      0xb5, 0x73, 0xe6, 0x5c, 0x62, 0x9a, 0xbd, 0x7e, 0x29, 0x31, 0x22, 0xa6,
+-      0x31, 0xbe, 0x96, 0x47, 0xbc, 0xee, 0xf2, 0x09, 0x68, 0x65, 0xe4, 0x40,
+-      0xee, 0x08, 0x5a, 0x1d, 0x49, 0xdd, 0xdf, 0xe6, 0x68, 0xc2, 0xaa, 0xac,
+-      0x9f, 0x3c, 0xfa, 0x05, 0xf2, 0x4e, 0xfb, 0x3e, 0x1f, 0x6d, 0xd2, 0xc9,
+-      0x0a, 0x43, 0xb3, 0xd4, 0x88, 0xe4, 0x76, 0x55, 0xb8, 0x4b, 0xdb, 0xfa,
+-      0x11, 0x35, 0x32, 0x88, 0x9b, 0x9a, 0xdd, 0xad, 0xd5, 0x13, 0x45, 0x9d,
+-      0x20, 0xe6, 0x89, 0x40, 0xab, 0x32, 0xa0, 0x56, 0x46, 0x44, 0x37, 0xfe,
+-      0xd6, 0xe4, 0xb8, 0xc8, 0xaa, 0xb9, 0x07, 0xc6, 0x7f, 0xe3, 0x46, 0x79,
+-      0x94, 0x58, 0xf5, 0x43, 0xdf, 0x7f, 0xae, 0xde, 0x33, 0x6e, 0xc1, 0x7b,
+-      0x97, 0x21, 0xdf, 0xb6, 0x6d, 0x31, 0x1f, 0x19, 0xfb, 0x8c, 0x3b, 0x60,
+-      0x59, 0x8c, 0x93, 0x3e, 0x28, 0x73, 0x39, 0x1e, 0xfa, 0x1a, 0xe3, 0xd2,
+-      0xc6, 0xcc, 0x1f, 0xac, 0x8f, 0x3a, 0x6d, 0x0e, 0x40, 0xde, 0xe4, 0xbf,
+-      0xed, 0x75, 0xe3, 0xf7, 0x96, 0xf0, 0x11, 0x27, 0x7d, 0xba, 0x84, 0x78,
+-      0xbe, 0xdb, 0x74, 0xb6, 0xad, 0x50, 0x14, 0xf4, 0x19, 0x0b, 0xb4, 0x32,
+-      0xc6, 0xa9, 0x5e, 0xfa, 0x75, 0xcc, 0x6b, 0x04, 0x0f, 0x81, 0xe5, 0x32,
+-      0x9b, 0x37, 0xbb, 0x22, 0xf7, 0x7c, 0x76, 0xac, 0x59, 0xb0, 0x60, 0xea,
+-      0xb6, 0x27, 0x8d, 0x0e, 0xf2, 0xaf, 0xaf, 0x90, 0xa7, 0xe5, 0xfb, 0xc9,
+-      0x61, 0xde, 0x07, 0xf4, 0xb3, 0x79, 0x73, 0x69, 0x44, 0x78, 0x58, 0xfa,
+-      0xb6, 0xc3, 0x46, 0x1b, 0x73, 0xb0, 0x7b, 0x3e, 0x7b, 0xae, 0xf9, 0x00,
+-      0xbf, 0xf3, 0x75, 0xd2, 0xa8, 0xfe, 0xc0, 0x3a, 0x15, 0x11, 0xe9, 0xc3,
+-      0xcf, 0x3e, 0xee, 0xf9, 0x6c, 0xe7, 0x92, 0x31, 0x6c, 0xcf, 0x6e, 0xfb,
+-      0x93, 0xfd, 0x54, 0x46, 0x64, 0x3d, 0x34, 0x76, 0xfb, 0xea, 0xc0, 0x3d,
+-      0x9f, 0xcd, 0x2c, 0x19, 0x64, 0x1f, 0x9f, 0x66, 0x7c, 0xc9, 0xd7, 0x89,
+-      0x2a, 0x8e, 0x0f, 0xd4, 0x41, 0x59, 0x64, 0xdb, 0xed, 0x0b, 0x03, 0xbf,
+-      0xb7, 0x16, 0x0c, 0x94, 0xd8, 0x3a, 0x70, 0x51, 0x07, 0x0f, 0x9a, 0xce,
+-      0x5c, 0xc0, 0x61, 0xeb, 0xa0, 0xcb, 0x47, 0x1d, 0x24, 0xa9, 0x83, 0xdc,
+-      0x4c, 0x23, 0xfc, 0x36, 0x75, 0xb0, 0x60, 0x7c, 0xf3, 0xe6, 0xb2, 0x08,
+-      0x9c, 0x0e, 0xe3, 0x47, 0x0e, 0xe6, 0x45, 0xaa, 0xcb, 0xd8, 0x4c, 0xbd,
+-      0xdd, 0xf3, 0xd9, 0xf9, 0x4b, 0x6c, 0x9d, 0xdf, 0xea, 0x0e, 0xdc, 0x47,
+-      0xbb, 0x69, 0xa5, 0xad, 0x6f, 0xe5, 0xd1, 0xce, 0xa3, 0x8f, 0x47, 0x02,
+-      0xbb, 0xb3, 0x1b, 0xa9, 0xab, 0x35, 0x1c, 0xc7, 0x3a, 0xca, 0xd5, 0xc5,
+-      0xdf, 0x31, 0xfe, 0x8e, 0xf3, 0xb7, 0xcc, 0x8f, 0x7a, 0x49, 0xb6, 0xd8,
+-      0x25, 0xd9, 0x1c, 0x94, 0xc7, 0x63, 0xaf, 0x55, 0x96, 0x47, 0x8e, 0xdf,
+-      0xba, 0x3a, 0xd0, 0xc9, 0x36, 0xfe, 0xbf, 0x32, 0xd9, 0x57, 0xe0, 0x32,
+-      0xe2, 0x3e, 0x27, 0x44, 0x3e, 0xbd, 0xa3, 0x13, 0x39, 0x62, 0xef, 0xef,
+-      0xf2, 0xd8, 0x4b, 0xd9, 0xaa, 0x38, 0x3f, 0xcf, 0x2d, 0x49, 0xcf, 0xf6,
+-      0x18, 0xf0, 0xb9, 0x8d, 0x7e, 0x0c, 0x64, 0x47, 0xa8, 0x03, 0xb1, 0x93,
+-      0x2f, 0x52, 0x7f, 0xdd, 0xac, 0x73, 0x8a, 0xb1, 0x4c, 0x8f, 0xd2, 0x67,
+-      0x69, 0xb3, 0x7a, 0x98, 0x07, 0xed, 0xe5, 0x51, 0xb6, 0x9b, 0xa6, 0x4c,
+-      0x25, 0xb4, 0x5f, 0x05, 0x72, 0x0f, 0xf7, 0x0c, 0xdb, 0x3f, 0x6c, 0xfc,
+-      0xba, 0xe2, 0x14, 0xc7, 0x1e, 0xf5, 0x6e, 0xc6, 0x68, 0x93, 0xe8, 0x2a,
+-      0x46, 0x5d, 0xe9, 0x3e, 0xff, 0x34, 0x5d, 0x5e, 0x96, 0xf7, 0x0a, 0xf2,
+-      0x09, 0xcb, 0xfa, 0x89, 0xd1, 0xb2, 0x90, 0x49, 0x21, 0xd2, 0x76, 0xae,
+-      0x64, 0x59, 0x25, 0xf6, 0xfe, 0xb3, 0xd8, 0xed, 0x1b, 0x0c, 0x91, 0xb7,
+-      0xb1, 0x7d, 0x3b, 0x8d, 0x73, 0x73, 0x86, 0xfe, 0x1c, 0xf8, 0x9d, 0x15,
+-      0x9d, 0x29, 0xf5, 0xe6, 0xe1, 0x15, 0xc6, 0xde, 0xa8, 0x16, 0xef, 0x74,
+-      0x0b, 0xbf, 0x37, 0x9c, 0xe1, 0x35, 0x88, 0x33, 0xa1, 0xd4, 0x83, 0x77,
+-      0x92, 0x7b, 0x9e, 0x33, 0xf2, 0x7e, 0x7c, 0x24, 0xa3, 0x47, 0x1f, 0xe6,
+-      0x39, 0x39, 0x30, 0xb9, 0x54, 0x31, 0x4e, 0x05, 0xc9, 0x7b, 0x3d, 0x70,
+-      0x32, 0x87, 0x6a, 0x75, 0xf4, 0x04, 0x5d, 0xa0, 0x2f, 0x96, 0xcb, 0xb8,
+-      0xe2, 0x1c, 0xa3, 0xe0, 0xb6, 0x5b, 0xdb, 0x68, 0x63, 0x79, 0x7c, 0xa1,
+-      0x0b, 0x1e, 0x6d, 0x53, 0xa6, 0x18, 0xe3, 0x3c, 0xda, 0xfa, 0x84, 0xe0,
+-      0x82, 0xdc, 0x77, 0x0d, 0x53, 0xcf, 0x82, 0x0f, 0xaf, 0xda, 0x7b, 0xd5,
+-      0x88, 0x11, 0x55, 0x4e, 0x23, 0xdf, 0xae, 0xc6, 0x76, 0xdb, 0x1d, 0x1a,
+-      0x2e, 0xfb, 0xb8, 0xae, 0xb5, 0x3b, 0x64, 0x1f, 0x1d, 0xd1, 0x2b, 0x53,
+-      0xa8, 0x97, 0xc7, 0xb9, 0x65, 0x2e, 0x1b, 0xe7, 0xd8, 0x06, 0xf3, 0x8e,
+-      0xe5, 0x89, 0xf7, 0xf7, 0x2f, 0xfd, 0x49, 0xbf, 0x3d, 0x35, 0x2a, 0x64,
+-      0x9f, 0x8f, 0xdc, 0x13, 0xeb, 0x64, 0xbe, 0x36, 0x7d, 0xaf, 0x8f, 0x7e,
+-      0x82, 0xed, 0x1f, 0x8f, 0x73, 0x3e, 0xe7, 0x1a, 0xb2, 0x0f, 0x48, 0xee,
+-      0xa1, 0x4d, 0xdf, 0xf7, 0x63, 0xdf, 0x9f, 0x2c, 0x17, 0x2e, 0x73, 0x98,
+-      0x38, 0x19, 0x6d, 0x97, 0xfa, 0x96, 0xf5, 0xe3, 0x05, 0x41, 0xe4, 0x66,
+-      0x38, 0x31, 0xd2, 0x00, 0x0c, 0x27, 0x45, 0xd7, 0xe9, 0xcf, 0x6c, 0x30,
+-      0xfe, 0xcd, 0x8a, 0xd6, 0x36, 0x6a, 0xbd, 0xaa, 0xac, 0x67, 0x8c, 0xdd,
+-      0xda, 0x67, 0xd4, 0x6b, 0x7d, 0x6a, 0xee, 0x18, 0xe3, 0xd0, 0x01, 0xe6,
+-      0xe8, 0xe5, 0x82, 0x15, 0x35, 0x46, 0xb4, 0xbf, 0x06, 0x0d, 0xf0, 0xdb,
+-      0xf7, 0x24, 0xf4, 0xf8, 0x37, 0x54, 0x23, 0xb8, 0x56, 0xf8, 0xa7, 0xfa,
+-      0x8e, 0x95, 0xa6, 0x0d, 0x7c, 0xa1, 0xe1, 0x67, 0x65, 0x79, 0x6c, 0x8f,
+-      0x76, 0xce, 0xe2, 0xbc, 0xbc, 0xb9, 0x48, 0xf7, 0x67, 0x14, 0xd1, 0x91,
+-      0x70, 0xae, 0x11, 0xec, 0x62, 0x3c, 0xfe, 0xb7, 0x86, 0x08, 0x8e, 0xf0,
+-      0xfb, 0xa7, 0xd7, 0xca, 0x1e, 0x37, 0xcb, 0x0a, 0x06, 0x16, 0x84, 0x6b,
+-      0x38, 0x86, 0x67, 0xf8, 0x7f, 0x7f, 0xf6, 0x75, 0xeb, 0xdc, 0x2c, 0x63,
+-      0x70, 0x25, 0x83, 0xe2, 0xf0, 0x84, 0xae, 0x4d, 0xa9, 0xff, 0xd9, 0x3d,
+-      0x37, 0xf6, 0x3a, 0xe3, 0x67, 0x9e, 0x0f, 0x34, 0x6a, 0x49, 0xb5, 0xae,
+-      0x5c, 0xf4, 0x3a, 0x3c, 0xf1, 0x52, 0x21, 0xce, 0xe7, 0xef, 0x75, 0x3e,
+-      0x7e, 0x49, 0x3f, 0x72, 0xdf, 0x76, 0x1e, 0x6d, 0x2e, 0x1a, 0xa7, 0xde,
+-      0xdd, 0x33, 0x38, 0xe6, 0x2f, 0x34, 0xdc, 0x69, 0x8f, 0xb3, 0xd6, 0x98,
+-      0xc3, 0x31, 0x2a, 0xd0, 0x1a, 0x9c, 0xe5, 0x79, 0xfe, 0xd8, 0x42, 0x96,
+-      0x96, 0xb6, 0x5a, 0xe9, 0x43, 0x25, 0xac, 0x73, 0xbd, 0x79, 0x70, 0x76,
+-      0x4f, 0x93, 0xee, 0xfb, 0x02, 0x6d, 0x35, 0xd4, 0xf0, 0x2b, 0x2b, 0xaa,
+-      0x39, 0xcd, 0xaf, 0x73, 0xd4, 0x77, 0x26, 0xa4, 0xac, 0xcc, 0xab, 0x11,
+-      0x6d, 0x50, 0xde, 0xb2, 0x30, 0x33, 0x10, 0x6e, 0xb0, 0xc7, 0x0f, 0xdc,
+-      0x91, 0x19, 0x61, 0xae, 0x2c, 0x6d, 0x2a, 0x58, 0x19, 0x78, 0xc3, 0xf2,
+-      0xcf, 0x1a, 0xc1, 0xce, 0xec, 0x1f, 0xe3, 0xb0, 0x5f, 0x21, 0x87, 0xd6,
+-      0x3b, 0xe2, 0x79, 0xbf, 0x6b, 0x03, 0xfb, 0x2d, 0x37, 0xec, 0x3c, 0xfc,
+-      0xb6, 0x44, 0x40, 0xd6, 0x8c, 0xc6, 0x3e, 0x33, 0x1e, 0x90, 0xbd, 0x19,
+-      0x5e, 0xe4, 0xda, 0xa5, 0x4c, 0xbd, 0x36, 0x8e, 0x1c, 0x19, 0xa6, 0xec,
+-      0x23, 0x39, 0x54, 0x9e, 0x5f, 0x47, 0x70, 0xc8, 0x3a, 0xb8, 0xf6, 0x2a,
+-      0x39, 0x61, 0x9b, 0x21, 0x6d, 0x28, 0x58, 0x18, 0x98, 0x81, 0xc6, 0xb5,
+-      0x3f, 0x7a, 0xb9, 0x24, 0x90, 0xf7, 0xdb, 0x3e, 0xc3, 0xd8, 0x76, 0x1a,
+-      0xbf, 0x26, 0x56, 0xc9, 0x3e, 0x93, 0xb4, 0xd4, 0x63, 0x5b, 0x0d, 0xc8,
+-      0x68, 0x4e, 0x8c, 0x1a, 0xb2, 0x0f, 0xd2, 0xb2, 0x56, 0x07, 0x5e, 0xa3,
+-      0xdf, 0x51, 0x9e, 0xac, 0xb3, 0x50, 0x57, 0xca, 0x14, 0xf6, 0x70, 0x28,
+-      0x2d, 0x9f, 0x15, 0x9d, 0x3c, 0x61, 0xc6, 0x99, 0x35, 0x48, 0x7c, 0x18,
+-      0xfb, 0xcc, 0xeb, 0x86, 0x70, 0x78, 0xdd, 0x5c, 0xa9, 0x54, 0x33, 0xde,
+-      0x3a, 0xfd, 0x63, 0xf6, 0x7a, 0x86, 0x9f, 0x58, 0x2e, 0x3c, 0x54, 0x72,
+-      0x43, 0x27, 0x9e, 0x34, 0x6a, 0xf0, 0x84, 0x96, 0xe7, 0x74, 0xc4, 0x44,
+-      0xbc, 0x90, 0x58, 0x90, 0xa3, 0x87, 0x90, 0x1b, 0x1b, 0x9d, 0x17, 0x95,
+-      0x5f, 0x33, 0x6f, 0x04, 0x9e, 0xcb, 0x74, 0xe1, 0x41, 0xb9, 0x8f, 0xa5,
+-      0xd4, 0xb7, 0x35, 0x3a, 0xa4, 0xbf, 0x2e, 0xec, 0xb2, 0xd7, 0x65, 0xc7,
+-      0x3e, 0x73, 0xd8, 0x78, 0xa4, 0x20, 0xab, 0x60, 0xfe, 0xd8, 0x67, 0x9e,
+-      0x34, 0x4e, 0xdb, 0x73, 0x27, 0x7b, 0x16, 0xfa, 0x4d, 0xc1, 0xc6, 0x72,
+-      0xa8, 0xcc, 0x2f, 0x1c, 0xc6, 0xa7, 0xe1, 0xa8, 0x19, 0xa3, 0xed, 0xc9,
+-      0x7a, 0xcf, 0xed, 0x70, 0xd6, 0xb8, 0xe8, 0x9b, 0x77, 0xc0, 0x55, 0x23,
+-      0x9c, 0xbe, 0xc8, 0xb7, 0xdb, 0xf8, 0xbf, 0xe8, 0x76, 0xca, 0xd6, 0xad,
+-      0x93, 0xd8, 0xd3, 0x27, 0xf9, 0x9f, 0x51, 0x4d, 0x1d, 0xe9, 0x1d, 0xb2,
+-      0xae, 0x5d, 0x49, 0x6c, 0x65, 0x1c, 0x75, 0x57, 0xb3, 0xcc, 0xdb, 0xd4,
+-      0xfb, 0x82, 0x81, 0x0a, 0x72, 0x7d, 0xcb, 0x7a, 0x87, 0x5c, 0x7f, 0x61,
+-      0xa0, 0x31, 0x67, 0x30, 0xfe, 0xe1, 0x66, 0xbd, 0x4d, 0xee, 0x11, 0x6f,
+-      0x30, 0x2e, 0x5a, 0xb1, 0x75, 0x52, 0x46, 0xf7, 0xc5, 0x94, 0x62, 0x1f,
+-      0x8b, 0xe0, 0x9f, 0x61, 0xc1, 0x15, 0xb1, 0x88, 0x5d, 0xba, 0x19, 0x45,
+-      0x8b, 0xec, 0xf5, 0x69, 0x97, 0xf1, 0xbb, 0xe4, 0x7e, 0x03, 0xa2, 0x93,
+-      0x2e, 0x18, 0xb9, 0x23, 0x32, 0x67, 0xb3, 0x2d, 0x04, 0x16, 0xff, 0x8e,
+-      0x39, 0x93, 0xcc, 0x4f, 0x7d, 0xae, 0x49, 0xc9, 0x05, 0x7d, 0xe4, 0xfe,
+-      0x8f, 0x40, 0x6f, 0x4f, 0x50, 0xd7, 0xad, 0x21, 0x1b, 0xf3, 0x7c, 0x09,
+-      0xd8, 0x7c, 0xdf, 0x7c, 0x05, 0x1f, 0x45, 0x25, 0x73, 0xdc, 0x86, 0xf1,
+-      0x35, 0xa8, 0xaa, 0x89, 0xfa, 0xca, 0xb1, 0x94, 0xe7, 0x5b, 0x99, 0xc7,
+-      0x7c, 0x12, 0x55, 0x6b, 0x63, 0x48, 0x70, 0xec, 0x95, 0xc6, 0xad, 0xbc,
+-      0xd6, 0x87, 0x64, 0xca, 0xc5, 0x71, 0xfc, 0xd0, 0xaa, 0x9a, 0x29, 0xb2,
+-      0x99, 0xde, 0x0a, 0x83, 0x79, 0xb7, 0xad, 0x0b, 0x62, 0x79, 0x4a, 0xb8,
+-      0x54, 0x63, 0x74, 0x0b, 0xfe, 0x40, 0xdb, 0xd5, 0x3b, 0x36, 0x2a, 0x71,
+-      0xda, 0x6c, 0x82, 0x3a, 0x97, 0xb2, 0x96, 0xb5, 0x2a, 0xf0, 0x5b, 0xea,
+-      0x38, 0xce, 0x73, 0xc3, 0xff, 0x1a, 0xd4, 0xa5, 0xa5, 0x38, 0x6b, 0xc5,
+-      0x35, 0x1f, 0xed, 0x52, 0x5d, 0x27, 0xbc, 0x6b, 0x45, 0x48, 0xad, 0x40,
+-      0xb9, 0x56, 0xb0, 0xd3, 0x74, 0x41, 0x97, 0x53, 0xb7, 0xf5, 0x19, 0x6f,
+-      0x94, 0xcb, 0x75, 0x87, 0x7d, 0xdd, 0x5f, 0xb8, 0x9e, 0xe6, 0xf5, 0xf3,
+-      0xbc, 0x3e, 0x48, 0xdd, 0xab, 0x57, 0x48, 0xfd, 0xcd, 0xa6, 0xd4, 0x27,
+-      0x1d, 0x31, 0x12, 0x85, 0xf9, 0x88, 0xdd, 0x9e, 0x2f, 0xbb, 0xed, 0xf6,
+-      0x7c, 0x1b, 0x4e, 0xb6, 0x11, 0x8f, 0x96, 0xc3, 0x44, 0x45, 0x40, 0x70,
+-      0x5e, 0xe4, 0xe2, 0xdc, 0x65, 0x45, 0xae, 0xad, 0x8c, 0x8b, 0x3d, 0x4f,
+-      0x97, 0x23, 0xde, 0x35, 0xc7, 0xb6, 0xc3, 0x34, 0x79, 0x8a, 0xee, 0x7f,
+-      0x5d, 0x69, 0xf1, 0xc9, 0xb2, 0x4e, 0x8a, 0x9c, 0xf7, 0x7e, 0xd3, 0x19,
+-      0x6e, 0x72, 0x2c, 0xc8, 0x95, 0xc2, 0x88, 0x5d, 0x54, 0x66, 0x57, 0x08,
+-      0x3e, 0x24, 0x32, 0x2d, 0xcc, 0xd0, 0xe2, 0x41, 0xe6, 0x56, 0xc1, 0x2c,
+-      0x75, 0xbb, 0x9e, 0x88, 0x7d, 0xc2, 0xde, 0xb3, 0xe4, 0x9c, 0x5c, 0x83,
+-      0x16, 0xdd, 0x81, 0x05, 0xe1, 0x39, 0xcc, 0xd0, 0x68, 0x97, 0x66, 0xa9,
+-      0x43, 0xf7, 0xdf, 0x84, 0xff, 0x62, 0xd7, 0x3b, 0x92, 0xc9, 0x75, 0x96,
+-      0x73, 0x4e, 0xbf, 0x4a, 0x39, 0x76, 0x07, 0x44, 0x8e, 0xb1, 0x82, 0x1c,
+-      0x31, 0xc6, 0x5c, 0x53, 0xbb, 0x21, 0x30, 0x78, 0x49, 0x6f, 0x4f, 0xdb,
+-      0x7a, 0xeb, 0xe3, 0x79, 0x29, 0x76, 0x90, 0x3f, 0x9e, 0x6a, 0xf2, 0x16,
+-      0xd6, 0xf6, 0x25, 0xa7, 0x13, 0xfc, 0x3d, 0xfb, 0xa9, 0x0d, 0x86, 0x1e,
+-      0x76, 0xd8, 0xfc, 0xdf, 0x8d, 0xb8, 0xcd, 0xad, 0x1d, 0x10, 0xee, 0xf8,
+-      0xb0, 0x5d, 0xce, 0x45, 0x9d, 0x54, 0xe0, 0x91, 0x82, 0xbf, 0x54, 0x30,
+-      0xbe, 0x7d, 0xd5, 0xfe, 0x9d, 0xe6, 0xdc, 0xba, 0xe8, 0xab, 0xc5, 0x18,
+-      0x25, 0xeb, 0x83, 0xfd, 0xb6, 0xef, 0xa7, 0xf1, 0x7d, 0xfb, 0x3b, 0x97,
+-      0xcf, 0xcb, 0xd0, 0x47, 0x9f, 0x70, 0xb0, 0x8d, 0x5e, 0x7b, 0x2f, 0xaa,
+-      0xac, 0x15, 0x5c, 0x8b, 0x1d, 0x1c, 0x95, 0xdb, 0xe8, 0x44, 0xbf, 0x26,
+-      0x36, 0xd1, 0x8d, 0xa4, 0x66, 0x7a, 0xb3, 0x4d, 0xd3, 0x73, 0x2a, 0x13,
+-      0x87, 0x9a, 0x7e, 0xcf, 0x58, 0x2e, 0xd7, 0xce, 0x5a, 0x87, 0x8d, 0x53,
+-      0x21, 0x7a, 0x70, 0x67, 0x89, 0xad, 0xdf, 0xa9, 0xdb, 0xec, 0x7d, 0x5b,
+-      0x94, 0xf9, 0xe9, 0x84, 0xc4, 0xd1, 0x79, 0xc8, 0x98, 0x22, 0x9b, 0xb3,
+-      0x7d, 0x0f, 0xe7, 0xa4, 0x2f, 0x15, 0x88, 0x5e, 0xc9, 0xff, 0x26, 0x19,
+-      0xcb, 0x7a, 0xa9, 0xcf, 0x58, 0xbb, 0xf0, 0xb8, 0xad, 0x38, 0x40, 0x1b,
+-      0x9b, 0x30, 0x2d, 0xeb, 0x08, 0x31, 0xa2, 0x7a, 0x81, 0x8a, 0xdc, 0xcc,
+-      0xad, 0x48, 0x31, 0x36, 0x1d, 0x31, 0x5a, 0x3e, 0x5a, 0x82, 0xb8, 0x9f,
+-      0x31, 0xdc, 0xb7, 0x93, 0xa3, 0xb9, 0x9f, 0xf3, 0x75, 0xca, 0x14, 0x7e,
+-      0xe9, 0xbc, 0xb8, 0x02, 0x46, 0x78, 0x99, 0xe3, 0x87, 0xd6, 0x94, 0xc8,
+-      0x9e, 0xea, 0xf9, 0x5f, 0x94, 0x61, 0x9b, 0x38, 0x6f, 0x35, 0xe7, 0xf8,
+-      0xed, 0x80, 0xde, 0xf6, 0x02, 0xfb, 0x69, 0x1c, 0x68, 0xe9, 0x14, 0x19,
+-      0x0e, 0x87, 0x9c, 0xb1, 0x23, 0x08, 0xb4, 0x6f, 0x55, 0x8a, 0x39, 0x04,
+-      0x70, 0xe5, 0xb8, 0x89, 0xa3, 0x4d, 0xcf, 0x90, 0xef, 0x48, 0xfd, 0x52,
+-      0x3c, 0x66, 0x3e, 0x65, 0xd5, 0xcf, 0x7e, 0xde, 0x3a, 0x66, 0xa8, 0x5b,
+-      0xa8, 0xed, 0x58, 0x25, 0x64, 0x4d, 0x33, 0x7d, 0xdb, 0x5d, 0x01, 0xdd,
+-      0xdc, 0xc3, 0xb6, 0xce, 0x24, 0x4e, 0x05, 0xdd, 0x6c, 0xeb, 0x11, 0x53,
+-      0x72, 0x08, 0x67, 0x5b, 0x1b, 0xe7, 0xb6, 0x27, 0x15, 0xf0, 0xc9, 0xba,
+-      0xad, 0xe4, 0x79, 0xb7, 0x27, 0x64, 0xcf, 0xf8, 0x18, 0xc7, 0x13, 0xdd,
+-      0xe6, 0x42, 0xcb, 0xfd, 0x55, 0xb4, 0x9f, 0x6a, 0x14, 0x6d, 0x5d, 0xf7,
+-      0x11, 0xef, 0x70, 0x17, 0xcb, 0xbc, 0x1c, 0x98, 0x87, 0xe7, 0x42, 0x2d,
+-      0x6b, 0xe7, 0xc1, 0x19, 0x3b, 0xa6, 0x04, 0xda, 0xb6, 0x2a, 0x71, 0x4d,
+-      0x6c, 0xf1, 0xce, 0x8c, 0x1e, 0x6c, 0x85, 0x60, 0x77, 0x8c, 0xfa, 0x98,
+-      0x87, 0x77, 0x16, 0x8b, 0x5c, 0xce, 0x70, 0xd0, 0x11, 0xe8, 0x7a, 0x8a,
+-      0xf3, 0x5b, 0xb5, 0x40, 0x64, 0x07, 0xb2, 0x19, 0x91, 0x3f, 0x86, 0x64,
+-      0xf6, 0xec, 0xdb, 0x87, 0x0d, 0x38, 0x4f, 0x34, 0x3d, 0x68, 0xc1, 0xde,
+-      0x63, 0xde, 0x22, 0xf3, 0xd0, 0x21, 0xf3, 0x50, 0x4e, 0x7f, 0x5a, 0x4d,
+-      0xb9, 0xb7, 0xd8, 0x72, 0xcf, 0xc3, 0xa8, 0x29, 0xeb, 0x64, 0x4e, 0xed,
+-      0x4e, 0x0c, 0x12, 0x3b, 0x03, 0x17, 0x7b, 0xd8, 0xcf, 0xcb, 0x94, 0x79,
+-      0x01, 0xf5, 0x3e, 0xd5, 0x2e, 0xfc, 0xb6, 0x0f, 0x03, 0xa9, 0xe2, 0x1e,
+-      0x74, 0x05, 0x92, 0x7a, 0x4f, 0x39, 0xfa, 0xc8, 0xf7, 0x7a, 0xac, 0xa9,
+-      0x99, 0x72, 0x3d, 0x8d, 0x1d, 0xa9, 0xa8, 0x46, 0x7f, 0xa0, 0xde, 0xa1,
+-      0xcf, 0x83, 0x3e, 0xf9, 0xaa, 0x23, 0x4a, 0x1f, 0x30, 0xbd, 0x17, 0x89,
+-      0x0d, 0x27, 0xd0, 0x65, 0xa1, 0xc6, 0xb6, 0x87, 0x9f, 0x8e, 0x19, 0x0e,
+-      0x59, 0x6b, 0x0f, 0xe6, 0xa8, 0x03, 0x95, 0x73, 0x22, 0x3a, 0xa8, 0xa4,
+-      0xcf, 0x8e, 0x07, 0x74, 0xff, 0x73, 0x94, 0x67, 0x0f, 0xe5, 0x59, 0x93,
+-      0x9f, 0x43, 0xdf, 0x0e, 0x45, 0x7c, 0x3a, 0xd0, 0xbe, 0x81, 0xd7, 0x77,
+-      0x53, 0x9e, 0xc0, 0x80, 0x82, 0x34, 0xd1, 0xac, 0x8f, 0x7c, 0xf6, 0xc0,
+-      0x34, 0x79, 0xdc, 0xf6, 0x9c, 0xc5, 0xc9, 0x05, 0x4a, 0x71, 0xd8, 0x14,
+-      0xfc, 0xd6, 0x30, 0x4a, 0x3b, 0x3d, 0xc4, 0x19, 0x89, 0x7a, 0x55, 0x94,
+-      0x1a, 0x82, 0x01, 0x33, 0x79, 0xcd, 0xc5, 0xb9, 0xa9, 0xc6, 0x31, 0x2d,
+-      0xcd, 0x38, 0x59, 0xe4, 0x76, 0x7f, 0xb0, 0x8e, 0x7a, 0x85, 0x9f, 0xc9,
+-      0x3a, 0x9a, 0xac, 0x35, 0x7d, 0xb9, 0x22, 0xbf, 0xbf, 0x52, 0xf6, 0x3f,
+-      0xe4, 0xaf, 0x3f, 0xad, 0x09, 0x47, 0x2e, 0x96, 0xff, 0xb9, 0xf5, 0x84,
+-      0x5d, 0x5e, 0xca, 0xb9, 0x6c, 0x2e, 0x5f, 0x6e, 0x97, 0xfb, 0xb9, 0xf5,
+-      0x8c, 0xe6, 0x9c, 0x56, 0xae, 0xb8, 0x07, 0xef, 0xd4, 0x97, 0x5c, 0xc4,
+-      0x3c, 0x47, 0xc3, 0x32, 0x3c, 0x61, 0x9c, 0xad, 0x5f, 0xdf, 0xd4, 0xcd,
+-      0x38, 0x56, 0xe4, 0x5a, 0x75, 0xf4, 0x2b, 0x0b, 0x43, 0xe6, 0xa9, 0xa1,
+-      0x12, 0xf4, 0x90, 0x3b, 0x0a, 0x17, 0x10, 0x8e, 0x2a, 0xeb, 0x7c, 0xb7,
+-      0x96, 0x5f, 0xce, 0x79, 0xf5, 0xa0, 0x5f, 0x6d, 0xb3, 0xb9, 0x61, 0x54,
+-      0x15, 0xdc, 0xad, 0xb3, 0xc7, 0x7e, 0x39, 0xfe, 0x4b, 0xac, 0x98, 0xbe,
+-      0x6e, 0xd7, 0x8d, 0x43, 0x46, 0x91, 0xb3, 0x9c, 0x7a, 0x50, 0x25, 0x4e,
+-      0x0e, 0x9b, 0xcb, 0x24, 0x36, 0xfb, 0x59, 0x3f, 0x18, 0x53, 0xa7, 0x73,
+-      0x9b, 0xbf, 0xa9, 0x40, 0x55, 0xcf, 0x2e, 0x07, 0x64, 0xff, 0xaf, 0xec,
+-      0xd9, 0x96, 0xbe, 0xca, 0x0a, 0xeb, 0x57, 0x1f, 0xc4, 0x35, 0x8a, 0x7d,
+-      0x09, 0xdf, 0xa8, 0x28, 0xca, 0x18, 0x8c, 0xda, 0x72, 0xfe, 0xd2, 0x5a,
+-      0xab, 0xe5, 0xe6, 0x68, 0x78, 0xaf, 0xec, 0xd1, 0x82, 0xec, 0xb1, 0x0f,
+-      0x5c, 0x7f, 0x93, 0x7e, 0xa6, 0xb7, 0x59, 0xdc, 0x7b, 0x2a, 0x6b, 0xb3,
+-      0xf2, 0x9f, 0x82, 0x1e, 0xe2, 0x50, 0x54, 0x6b, 0x61, 0x9c, 0xd7, 0x7d,
+-      0x9b, 0x38, 0x1f, 0x71, 0xaf, 0xec, 0x6b, 0x2d, 0xc6, 0xc8, 0x52, 0xe4,
+-      0xd7, 0x48, 0x81, 0x43, 0x85, 0x75, 0x51, 0xda, 0x3d, 0x7a, 0x32, 0xbf,
+-      0xb3, 0x72, 0x5e, 0x27, 0x63, 0xe1, 0xe5, 0xfd, 0xf7, 0x69, 0xea, 0x75,
+-      0x94, 0xff, 0xed, 0xb8, 0xb4, 0xee, 0x22, 0x6b, 0x4f, 0x12, 0x7b, 0x7f,
+-      0x6b, 0xad, 0x7f, 0x4f, 0xd9, 0xe9, 0x7b, 0x5f, 0x67, 0xc6, 0x64, 0x3f,
+-      0xda, 0xd1, 0xc2, 0xfa, 0x7c, 0xeb, 0xbf, 0xdf, 0x8f, 0x46, 0x5b, 0x42,
+-      0x74, 0x07, 0xb9, 0x5d, 0x1c, 0x7d, 0x38, 0x9a, 0x68, 0xd4, 0x76, 0x42,
+-      0x93, 0x75, 0x69, 0x7e, 0xfa, 0x70, 0x2c, 0x81, 0x68, 0xc9, 0x55, 0xd5,
+-      0xe4, 0x5b, 0x88, 0x3a, 0x64, 0x8f, 0x50, 0xa2, 0xb1, 0x6d, 0x37, 0xc7,
+-      0xe4, 0x5f, 0xdb, 0x87, 0xd1, 0x44, 0xcb, 0xad, 0x8c, 0x23, 0xfe, 0x8a,
+-      0x3c, 0xd7, 0xe9, 0x38, 0x4c, 0x1c, 0xd8, 0x5e, 0x58, 0x1b, 0x5b, 0x9f,
+-      0xf8, 0x15, 0xe5, 0xb7, 0x85, 0x64, 0xbd, 0x3f, 0x56, 0xee, 0x2c, 0x7a,
+-      0x53, 0x67, 0xb1, 0x79, 0x50, 0x11, 0xfb, 0xc2, 0xa6, 0xb4, 0xc8, 0x73,
+-      0x16, 0x1b, 0x07, 0xbf, 0x87, 0x43, 0x83, 0xb3, 0xd1, 0x6a, 0xeb, 0xa6,
+-      0x0b, 0x5b, 0xf7, 0x9e, 0xc4, 0x9e, 0x94, 0x85, 0xdd, 0x21, 0x0f, 0xb6,
+-      0x1c, 0x54, 0xb0, 0x2a, 0x70, 0x06, 0x3b, 0xf7, 0x5a, 0x98, 0x1f, 0xea,
+-      0x46, 0x9b, 0x59, 0x81, 0xd2, 0x9a, 0x05, 0x9d, 0x2a, 0xcb, 0xad, 0x1f,
+-      0xed, 0x52, 0x6e, 0xe4, 0xb8, 0x73, 0xae, 0xe3, 0xc4, 0x02, 0x15, 0x3e,
+-      0x03, 0x5a, 0x75, 0x24, 0xaa, 0xdc, 0x92, 0x6d, 0x55, 0x3a, 0x46, 0x6d,
+-      0x3e, 0xa5, 0xdc, 0x94, 0xf5, 0x55, 0x4a, 0x4c, 0x3f, 0x14, 0x3a, 0x8b,
+-      0x74, 0xba, 0xaa, 0x32, 0xef, 0x2f, 0x67, 0xc9, 0x1d, 0x24, 0xe7, 0x30,
+-      0x69, 0x53, 0x7f, 0xec, 0xb9, 0x02, 0xb1, 0xbb, 0x29, 0xfc, 0x64, 0xe4,
+-      0x15, 0xbc, 0x32, 0xf2, 0x2f, 0x58, 0xae, 0x49, 0x9e, 0x69, 0x75, 0x3b,
+-      0x23, 0x96, 0xb5, 0xbf, 0x39, 0x6e, 0xcd, 0x34, 0x2c, 0xb6, 0x57, 0x85,
+-      0x59, 0x91, 0xef, 0x62, 0xb7, 0xc6, 0xb6, 0x52, 0xc7, 0xed, 0x7b, 0xb7,
+-      0xbe, 0xc8, 0xa7, 0xe1, 0x4b, 0xe5, 0xcc, 0x5a, 0x44, 0x87, 0x6a, 0xa1,
+-      0x6f, 0xab, 0x71, 0x18, 0x5d, 0xff, 0x5b, 0x69, 0xc2, 0x4d, 0xd9, 0x57,
+-      0xf0, 0xe6, 0x48, 0x37, 0x31, 0x53, 0xef, 0xf8, 0x96, 0x62, 0x75, 0xef,
+-      0x0e, 0xe9, 0x6d, 0xff, 0x55, 0x89, 0xc6, 0xcb, 0x69, 0x53, 0x65, 0xcc,
+-      0x09, 0x6e, 0x1e, 0x91, 0x7c, 0xb9, 0x03, 0xee, 0x01, 0x3d, 0xb7, 0x82,
+-      0x3c, 0xfb, 0x0b, 0x8b, 0xe2, 0x73, 0x66, 0xd0, 0x2e, 0x1d, 0x8a, 0x1e,
+-      0x34, 0xd4, 0x6e, 0x3c, 0x6e, 0xea, 0x93, 0xbf, 0x75, 0x18, 0xe9, 0x6f,
+-      0xa2, 0x09, 0xeb, 0xb2, 0x7a, 0x7a, 0x29, 0xf3, 0xb0, 0x9d, 0x49, 0x13,
+-      0xa9, 0xa4, 0xde, 0xd1, 0xe5, 0xe8, 0xc7, 0xdd, 0x81, 0xfa, 0x6d, 0x6f,
+-      0x93, 0xcb, 0x79, 0x88, 0x29, 0xc9, 0x89, 0x0c, 0xf3, 0xdc, 0x7e, 0x6c,
+-      0x3d, 0x18, 0xc1, 0x96, 0xfd, 0x26, 0xfa, 0x92, 0x19, 0xca, 0xf6, 0x1a,
+-      0x6d, 0xdb, 0xb2, 0xda, 0x43, 0xf1, 0x1b, 0x54, 0x04, 0xa2, 0xec, 0xb3,
+-      0x45, 0x8d, 0x04, 0xfc, 0xaa, 0xc2, 0xe8, 0x3f, 0xe1, 0x44, 0x2f, 0xcb,
+-      0x0c, 0xa4, 0x68, 0x73, 0x49, 0x37, 0xe3, 0x65, 0x1d, 0x46, 0xc7, 0x7d,
+-      0x38, 0x32, 0xee, 0x41, 0x7a, 0x5c, 0xe3, 0x51, 0x8e, 0x87, 0x86, 0x2d,
+-      0x62, 0xb9, 0x17, 0x8f, 0x1d, 0x76, 0x63, 0xfb, 0x3e, 0x0f, 0xe6, 0x45,
+-      0x66, 0xe1, 0xf0, 0xe1, 0x72, 0x1c, 0xe0, 0xf5, 0x9a, 0xc5, 0x7e, 0x7c,
+-      0x8d, 0xd7, 0x07, 0xf7, 0xb9, 0x38, 0x0f, 0xf3, 0x71, 0x9c, 0x86, 0x9d,
+-      0x1e, 0xaf, 0x40, 0x6a, 0x98, 0x26, 0x4f, 0xce, 0xfa, 0x3a, 0x33, 0x8c,
+-      0xa3, 0x87, 0x19, 0x1b, 0x0f, 0x9a, 0x48, 0xb0, 0x9f, 0x3d, 0xd4, 0x55,
+-      0x1f, 0x71, 0x6d, 0xeb, 0xb8, 0x60, 0xfc, 0x3a, 0xac, 0x1e, 0xd0, 0xdb,
+-      0x5a, 0x15, 0x23, 0xba, 0x44, 0x09, 0xca, 0x73, 0x2b, 0x6e, 0x95, 0xd7,
+-      0x5a, 0x12, 0xba, 0xd9, 0x8a, 0x6e, 0x9c, 0xe6, 0xb8, 0xff, 0x3b, 0xfd,
+-      0x76, 0x99, 0x43, 0xef, 0xbf, 0x5e, 0x3d, 0x89, 0xa1, 0x6c, 0x8e, 0x5c,
+-      0x1d, 0x08, 0x1f, 0x3a, 0x49, 0xfe, 0xf6, 0x38, 0xf1, 0xe7, 0x65, 0xcb,
+-      0x67, 0xa8, 0xb8, 0xe9, 0x01, 0x23, 0x7c, 0x41, 0x09, 0x6c, 0xfb, 0x25,
+-      0x75, 0x70, 0xe3, 0x61, 0x15, 0x1f, 0x1b, 0x5a, 0x86, 0x4c, 0x28, 0x8a,
+-      0x3d, 0x4b, 0x54, 0xdc, 0x70, 0xf0, 0x24, 0x71, 0xff, 0xac, 0xcd, 0x93,
+-      0x73, 0x99, 0x2f, 0x22, 0x38, 0x20, 0x6b, 0xf7, 0x6e, 0xc6, 0xef, 0x4a,
+-      0x9c, 0x19, 0xec, 0xa6, 0xdf, 0x56, 0xe2, 0x54, 0xfa, 0x24, 0xed, 0xb1,
+-      0x12, 0x8f, 0x0f, 0x1a, 0x93, 0x3f, 0x71, 0x54, 0xe2, 0x31, 0x9e, 0x0f,
+-      0xf1, 0x7c, 0xf1, 0xb0, 0x31, 0xd8, 0xa5, 0x56, 0x62, 0xd1, 0xa1, 0x66,
+-      0x0c, 0x26, 0xc5, 0x36, 0x35, 0x6c, 0x1b, 0x6f, 0x2a, 0xe8, 0x5e, 0x74,
+-      0xee, 0xc5, 0x3d, 0xd4, 0xd5, 0xdd, 0x43, 0xdd, 0xec, 0xcf, 0x47, 0x9d,
+-      0x9f, 0xc4, 0x43, 0xcc, 0xeb, 0x76, 0x27, 0x7d, 0x38, 0x9f, 0x32, 0xfc,
+-      0x9f, 0x52, 0x0c, 0xb3, 0x4c, 0x09, 0x68, 0x67, 0xe0, 0xc3, 0x2b, 0xd9,
+-      0x72, 0xf4, 0x0e, 0xd7, 0xe1, 0x27, 0xb4, 0xcf, 0x07, 0xf7, 0x9d, 0xb4,
+-      0xed, 0xff, 0x40, 0x6a, 0x2e, 0x1e, 0x1b, 0x33, 0xd9, 0xb6, 0xcc, 0x93,
+-      0xc3, 0xde, 0xdb, 0xe4, 0x4a, 0x89, 0x6f, 0x44, 0x87, 0x68, 0x16, 0xc4,
+-      0xc4, 0x93, 0xc8, 0x0e, 0xea, 0xfd, 0x37, 0xab, 0xc2, 0xab, 0x55, 0xea,
+-      0xd2, 0x81, 0x29, 0x4d, 0x8f, 0xd7, 0xa8, 0xf1, 0x41, 0xe6, 0xaf, 0xf1,
+-      0x5a, 0xea, 0xe4, 0xb1, 0x41, 0x27, 0x16, 0x2c, 0x56, 0x79, 0x3d, 0x7e,
+-      0x91, 0xb1, 0x2d, 0x3e, 0x4f, 0x35, 0x71, 0xc0, 0x96, 0x15, 0xf1, 0x12,
+-      0x72, 0xfb, 0xea, 0xc5, 0xf5, 0x8c, 0x5f, 0x0e, 0xb1, 0xbd, 0x58, 0xa5,
+-      0xea, 0xa4, 0xde, 0x5f, 0xc1, 0x18, 0xed, 0xfa, 0x11, 0x1e, 0xc7, 0x47,
+-      0xac, 0xee, 0x55, 0xe4, 0xdc, 0xf3, 0x03, 0x56, 0xf7, 0xcd, 0xa6, 0xe1,
+-      0x2b, 0x51, 0x03, 0xd1, 0x2f, 0xe0, 0x15, 0x1c, 0x1b, 0x93, 0x32, 0xb2,
+-      0x0f, 0x24, 0x86, 0x91, 0xa4, 0xd5, 0x3d, 0x64, 0xce, 0x47, 0xb3, 0x9d,
+-      0x1b, 0xbb, 0x2a, 0xf3, 0x98, 0x29, 0x7e, 0x24, 0x6b, 0x25, 0x53, 0xf8,
+-      0x25, 0xdb, 0xb9, 0x30, 0x52, 0x8d, 0x19, 0xb5, 0xe2, 0x07, 0x67, 0xf1,
+-      0xc6, 0xe0, 0x77, 0x71, 0x7e, 0xd0, 0xc2, 0xa2, 0x90, 0x05, 0x67, 0xa8,
+-      0xd1, 0x6c, 0x55, 0x97, 0x12, 0x23, 0x14, 0xac, 0x6e, 0xf8, 0x1e, 0xde,
+-      0x1a, 0x94, 0xfd, 0xa6, 0x96, 0x2d, 0xcb, 0x00, 0x16, 0x5b, 0x7b, 0x66,
+-      0x8a, 0xdf, 0x48, 0xbd, 0x3f, 0x95, 0x07, 0xeb, 0x8c, 0x86, 0xc5, 0x5c,
+-      0xf8, 0x15, 0x8c, 0x8e, 0x18, 0xd1, 0xcd, 0x45, 0x39, 0x07, 0x5f, 0xa1,
+-      0x0e, 0xec, 0xf8, 0x74, 0xb0, 0x06, 0x0b, 0x2e, 0x32, 0x6b, 0xfc, 0xf0,
+-      0x3c, 0xda, 0xce, 0xa2, 0xc5, 0x01, 0x73, 0xa5, 0xfa, 0x6f, 0xf4, 0xd3,
+-      0x57, 0x70, 0x24, 0x5d, 0xc4, 0x6b, 0x1f, 0x5a, 0xe9, 0xe7, 0xf9, 0x7d,
+-      0xfe, 0x5e, 0xb4, 0xa4, 0x4e, 0xd8, 0xeb, 0x0f, 0xc7, 0x89, 0x8f, 0x83,
+-      0x29, 0x29, 0xa3, 0x61, 0x2c, 0xdb, 0x4a, 0x6c, 0x88, 0xe2, 0x9f, 0xb2,
+-      0x11, 0xe2, 0x43, 0x98, 0xf8, 0xd0, 0x4c, 0x7c, 0x30, 0x89, 0x0f, 0x4d,
+-      0xc4, 0x87, 0x20, 0xf1, 0xc1, 0xb0, 0xd7, 0xd6, 0xd3, 0x47, 0xbf, 0x8b,
+-      0x92, 0xe1, 0xb3, 0x70, 0xd1, 0x07, 0xce, 0x98, 0x16, 0xf9, 0x49, 0xa3,
+-      0xb6, 0x11, 0xf3, 0x95, 0xa8, 0xe6, 0x45, 0x9a, 0xed, 0x95, 0x0d, 0x6b,
+-      0x1c, 0x8b, 0x85, 0x60, 0xa8, 0x3e, 0xdc, 0x4f, 0xac, 0xfe, 0x95, 0xd1,
+-      0xd8, 0xef, 0x45, 0xe3, 0x81, 0x99, 0x30, 0x06, 0x17, 0xab, 0x0d, 0x4a,
+-      0xf4, 0xe3, 0x5e, 0x8e, 0xb3, 0x16, 0x73, 0xf7, 0x69, 0x98, 0xc7, 0xe3,
+-      0x1f, 0x53, 0xf5, 0x93, 0x2f, 0x3b, 0xe0, 0x9d, 0x4d, 0xba, 0x33, 0x87,
+-      0x4c, 0x80, 0xac, 0xd6, 0xeb, 0xc3, 0x95, 0xc7, 0x5f, 0x51, 0x15, 0xe4,
+-      0x3e, 0x2e, 0x31, 0xaf, 0x31, 0xd8, 0xa7, 0xaa, 0xb2, 0x96, 0x44, 0x0c,
+-      0xe7, 0xa1, 0x22, 0x42, 0x16, 0x51, 0xc7, 0xfc, 0xc2, 0xda, 0x68, 0x96,
+-      0x61, 0x47, 0x13, 0x39, 0xa7, 0x57, 0x3f, 0x21, 0x31, 0x6a, 0x36, 0x63,
+-      0x44, 0x79, 0x32, 0x7e, 0xe7, 0x6c, 0x78, 0x50, 0x96, 0xb4, 0xac, 0xaf,
+-      0x86, 0x34, 0x78, 0x22, 0x81, 0xe8, 0x56, 0xa6, 0x91, 0x1f, 0x5f, 0x10,
+-      0xc6, 0xea, 0xec, 0x09, 0x0c, 0x73, 0x7c, 0xab, 0xb2, 0xc5, 0x67, 0xc5,
+-      0xfe, 0xf8, 0xe7, 0xf2, 0x33, 0x67, 0x57, 0x1e, 0x98, 0x0d, 0x43, 0xbb,
+-      0x57, 0x1d, 0xae, 0x22, 0x07, 0x3f, 0xce, 0xb8, 0xa7, 0x4c, 0x7d, 0x42,
+-      0x41, 0xc7, 0x70, 0x1c, 0x33, 0x42, 0x2f, 0x28, 0xb1, 0x5a, 0xdd, 0xef,
+-      0x57, 0x6a, 0xf1, 0x89, 0x7d, 0xd4, 0xf5, 0xa2, 0x1f, 0x7a, 0xe4, 0xb9,
+-      0xb0, 0x6f, 0x1e, 0x15, 0xdd, 0xd6, 0xa7, 0x87, 0x38, 0x8e, 0xc9, 0x86,
+-      0x13, 0x82, 0x93, 0x8f, 0xba, 0xe1, 0x78, 0x74, 0x16, 0xa2, 0x68, 0x6a,
+-      0xb8, 0xb2, 0xeb, 0x5f, 0x54, 0xd1, 0x8b, 0xf0, 0x6b, 0x7d, 0x30, 0xae,
+-      0x18, 0xda, 0xcf, 0x95, 0x13, 0xf6, 0x7d, 0xb8, 0xaf, 0x66, 0x4f, 0x52,
+-      0x97, 0xc7, 0x0b, 0xf9, 0xd2, 0x3a, 0x24, 0x06, 0x64, 0x5f, 0xfe, 0x59,
+-      0xcc, 0x1d, 0xd6, 0xdb, 0x77, 0x29, 0x46, 0xf0, 0x06, 0xe5, 0x2c, 0xe6,
+-      0x0c, 0x07, 0x39, 0x97, 0x1a, 0x56, 0x26, 0x8b, 0xf8, 0x29, 0x18, 0xbc,
+-      0x8e, 0x18, 0x6c, 0x2d, 0xfb, 0x89, 0x19, 0xd7, 0x65, 0x4f, 0x82, 0x53,
+-      0xd1, 0x3b, 0x1a, 0x94, 0x38, 0x63, 0xa8, 0x71, 0x71, 0x3d, 0xeb, 0x78,
+-      0x86, 0x9b, 0x70, 0x3b, 0xc7, 0xdc, 0xc6, 0x79, 0xfb, 0xee, 0x62, 0x0b,
+-      0x4b, 0x16, 0xeb, 0x07, 0xca, 0x1c, 0xd1, 0x7b, 0x6b, 0x90, 0xeb, 0x9a,
+-      0x49, 0xbb, 0xb9, 0x7b, 0x91, 0x1e, 0x7e, 0x81, 0xb8, 0x4b, 0x9c, 0x46,
+-      0x2f, 0xe3, 0xce, 0x46, 0xc6, 0xa2, 0xf2, 0x88, 0xde, 0xcf, 0x1c, 0xf5,
+-      0xc2, 0x1d, 0x8e, 0x68, 0x48, 0x9e, 0xff, 0xf8, 0x32, 0x96, 0xc1, 0x1d,
+-      0xaa, 0x22, 0x0e, 0xea, 0xb9, 0xef, 0x42, 0x3f, 0x70, 0x3b, 0xfa, 0xf1,
+-      0x03, 0xf2, 0xbb, 0x99, 0x57, 0xe5, 0x88, 0x51, 0x19, 0x3c, 0x98, 0x3d,
+-      0x89, 0x03, 0xd9, 0x47, 0xb1, 0x37, 0xbb, 0x5b, 0x49, 0xdb, 0xf7, 0x20,
+-      0x15, 0x79, 0xee, 0x26, 0x5a, 0xa5, 0x7c, 0x06, 0x95, 0xa1, 0xaf, 0x5b,
+-      0xe9, 0x1a, 0x15, 0xd5, 0xa1, 0x20, 0x56, 0x27, 0xe3, 0x70, 0x44, 0xde,
+-      0xb6, 0xe4, 0xb9, 0xcf, 0x2d, 0x13, 0x06, 0xae, 0x4f, 0x96, 0x23, 0x76,
+-      0xc8, 0xb2, 0xfa, 0x9b, 0x9d, 0xd8, 0x34, 0xd1, 0x84, 0x95, 0xc3, 0x0f,
+-      0x59, 0xf3, 0x18, 0x73, 0xde, 0xbd, 0xc6, 0x83, 0x3b, 0x0e, 0x79, 0xb0,
+-      0x3e, 0x19, 0x85, 0x2f, 0x52, 0xc1, 0xdf, 0x01, 0x73, 0x39, 0x8c, 0xc9,
+-      0x49, 0x18, 0xfd, 0xd7, 0x39, 0x02, 0xc7, 0xc2, 0xaa, 0x07, 0x7f, 0x4d,
+-      0x1c, 0x5f, 0x45, 0xdc, 0x89, 0x4d, 0x58, 0xa8, 0x8e, 0x78, 0x71, 0x27,
+-      0xeb, 0x7f, 0x8c, 0x73, 0xff, 0xd6, 0x92, 0xe3, 0xc4, 0x02, 0x23, 0x36,
+-      0xa1, 0x68, 0xd8, 0x3a, 0xe1, 0xa6, 0xae, 0xdc, 0x88, 0x1d, 0xa9, 0xc5,
+-      0xf5, 0xfb, 0xfc, 0xb8, 0x63, 0xc2, 0x83, 0x96, 0xa4, 0xb5, 0xec, 0xb8,
+-      0x19, 0x5f, 0xab, 0xc1, 0xc0, 0xfa, 0x09, 0x2f, 0x6e, 0x4b, 0xea, 0xbe,
+-      0x1b, 0x98, 0xf3, 0x8f, 0x99, 0x41, 0xfc, 0xed, 0x84, 0x0f, 0xb7, 0x24,
+-      0x4f, 0x49, 0x1e, 0xb9, 0xdc, 0xc9, 0xd8, 0x73, 0xff, 0x44, 0x1d, 0xd6,
+-      0x26, 0xf5, 0x8b, 0x93, 0xe4, 0x76, 0xdd, 0x47, 0x4c, 0xdc, 0x3b, 0xa1,
+-      0xa2, 0x83, 0xed, 0x7c, 0x22, 0x39, 0x17, 0x5d, 0x47, 0x9a, 0x29, 0xc3,
+-      0x62, 0xac, 0x1a, 0x76, 0xc2, 0x24, 0x8b, 0xc7, 0x27, 0x81, 0x76, 0xfa,
+-      0x47, 0x22, 0xf5, 0x45, 0xec, 0x19, 0x30, 0x71, 0xd7, 0x84, 0x9c, 0x9f,
+-      0xb4, 0x9f, 0x95, 0xbb, 0x70, 0x70, 0x31, 0x6e, 0x1c, 0x56, 0x89, 0x03,
+-      0xa5, 0x48, 0xaf, 0x55, 0x70, 0x1b, 0xaf, 0xef, 0x4a, 0xd9, 0x7b, 0xab,
+-      0x11, 0x1a, 0x0a, 0x1c, 0xab, 0x21, 0x67, 0x58, 0x72, 0x30, 0x7f, 0xfd,
+-      0x41, 0xe2, 0x7c, 0x19, 0x71, 0xbe, 0x82, 0x1c, 0xf6, 0xba, 0xd1, 0x93,
+-      0x78, 0x80, 0xb8, 0x7c, 0x62, 0xb8, 0x9b, 0x71, 0xa7, 0x12, 0x5f, 0x63,
+-      0x1c, 0x48, 0xf2, 0xfc, 0xec, 0x90, 0xd1, 0x55, 0x46, 0x9c, 0x7e, 0x81,
+-      0xf8, 0xdb, 0x4f, 0xcc, 0xb8, 0x3b, 0x49, 0xb7, 0x1f, 0x62, 0x0e, 0x70,
+-      0x55, 0x74, 0xa1, 0x87, 0x39, 0xd6, 0x0d, 0x4a, 0xc0, 0xf7, 0x1a, 0x2a,
+-      0xe1, 0x38, 0x58, 0x8b, 0x96, 0x7d, 0x52, 0x46, 0xf0, 0x4b, 0x85, 0x7a,
+-      0xd8, 0x49, 0x9d, 0x9f, 0x84, 0x35, 0xe8, 0xe0, 0x78, 0xeb, 0x4d, 0x32,
+-      0x70, 0xfc, 0xd8, 0xd4, 0xb5, 0x7f, 0x22, 0xd6, 0xbe, 0x43, 0x4c, 0xf5,
+-      0xcf, 0x6e, 0x46, 0xab, 0x61, 0xf2, 0x38, 0x89, 0x57, 0x06, 0x0d, 0xf3,
+-      0x10, 0x9c, 0x78, 0x99, 0x3c, 0x6f, 0x6a, 0x36, 0x63, 0xa6, 0x21, 0x7e,
+-      0x98, 0xe1, 0x78, 0x54, 0xc9, 0x4b, 0xe0, 0x18, 0x07, 0xde, 0x38, 0xb8,
+-      0x8c, 0xe3, 0x92, 0x58, 0x2a, 0xf1, 0x2e, 0x43, 0x59, 0x97, 0x61, 0x0d,
+-      0xf5, 0xd1, 0x9a, 0x54, 0x91, 0x39, 0x12, 0xc1, 0x5d, 0xfb, 0xf3, 0x71,
+-      0x78, 0x5b, 0x28, 0x7e, 0x33, 0xe3, 0x70, 0xb8, 0x9c, 0x71, 0xd8, 0x15,
+-      0x11, 0xd9, 0x9c, 0x18, 0x65, 0xdc, 0xde, 0x91, 0x0a, 0xa3, 0x8d, 0x73,
+-      0x38, 0x99, 0x61, 0xbf, 0xc9, 0x3a, 0x9c, 0xc9, 0x78, 0x18, 0xb3, 0x34,
+-      0x1e, 0x44, 0xb5, 0xb1, 0x59, 0x3c, 0xfc, 0x3c, 0xe6, 0xf3, 0x30, 0xec,
+-      0x6b, 0x1b, 0x93, 0x0a, 0xe2, 0xed, 0x8a, 0xcd, 0xe7, 0xcf, 0x64, 0x04,
+-      0x9b, 0x65, 0x2d, 0x73, 0x7b, 0x95, 0x3c, 0x8b, 0x32, 0x98, 0xfa, 0x1e,
+-      0xaa, 0xa9, 0xff, 0xaa, 0x02, 0x0e, 0xfd, 0x34, 0x24, 0xb8, 0x5b, 0x4f,
+-      0xdc, 0x95, 0xe7, 0x04, 0x2c, 0x6b, 0x5d, 0x60, 0x3a, 0x1e, 0xfd, 0x9f,
+-      0x77, 0xa3, 0xf6, 0x33, 0x17, 0x82, 0x49, 0xc4, 0xbf, 0x14, 0xf1, 0x8f,
+-      0x63, 0xe8, 0xb9, 0x96, 0x18, 0x48, 0x99, 0xfe, 0x21, 0x45, 0x0c, 0x24,
+-      0x4e, 0x3f, 0x4a, 0x9c, 0xfe, 0x06, 0x71, 0xfa, 0xeb, 0xc4, 0xe9, 0xaf,
+-      0x11, 0x13, 0xf2, 0x6b, 0x7a, 0x6d, 0x72, 0xff, 0x85, 0xf3, 0xf1, 0x96,
+-      0xbd, 0xb6, 0x38, 0x93, 0xba, 0x9a, 0x3b, 0xac, 0x60, 0x9e, 0xa1, 0x1f,
+-      0x13, 0xbb, 0xff, 0x01, 0xe7, 0xc9, 0x3f, 0xa3, 0xce, 0x7e, 0x26, 0xa6,
+-      0x35, 0xd9, 0x07, 0x77, 0xb2, 0x51, 0xeb, 0x87, 0xfd, 0x2c, 0xb2, 0x29,
+-      0x5c, 0xb4, 0x24, 0xb9, 0x11, 0x8e, 0x64, 0xe3, 0xb1, 0xd3, 0x72, 0x9f,
+-      0x77, 0x96, 0xe4, 0xf5, 0x1b, 0xe1, 0x4c, 0xea, 0xc7, 0xe2, 0x94, 0x65,
+-      0x25, 0xff, 0x73, 0x25, 0x1b, 0xcd, 0xd7, 0x60, 0x63, 0x9b, 0x7f, 0xca,
+-      0xfe, 0xaf, 0xfe, 0xc2, 0x03, 0xd4, 0x57, 0x8e, 0x6d, 0x66, 0xa8, 0xfb,
+-      0x72, 0xf2, 0x95, 0x47, 0xb2, 0xf2, 0xbb, 0xb1, 0x23, 0xa1, 0x1e, 0x43,
+-      0x6c, 0xa6, 0xf0, 0xf1, 0x30, 0x6e, 0x4a, 0x7a, 0x68, 0x07, 0x71, 0x54,
+-      0xd1, 0xb7, 0x3e, 0x37, 0xd1, 0x4c, 0x5f, 0x7b, 0xc8, 0xd2, 0x22, 0x81,
+-      0x8e, 0x09, 0x72, 0x9e, 0x2d, 0x13, 0xcb, 0xb0, 0x62, 0xd8, 0xb2, 0x3c,
+-      0x4b, 0x8d, 0xf0, 0x56, 0xc5, 0x0f, 0x17, 0x7d, 0xd0, 0x41, 0xbf, 0xda,
+-      0x7c, 0x28, 0xa0, 0xbd, 0x46, 0x3c, 0xed, 0x6c, 0x3e, 0x41, 0xfb, 0x30,
+-      0x2e, 0xb6, 0x11, 0x4b, 0x9d, 0x91, 0x00, 0xf3, 0x44, 0x0f, 0x6d, 0xdf,
+-      0x8b, 0x8b, 0x09, 0xf1, 0x2f, 0xbd, 0xeb, 0x9f, 0x98, 0x9b, 0x74, 0xd1,
+-      0x37, 0x7e, 0x9e, 0xa8, 0xa3, 0x0f, 0xb8, 0xf1, 0x46, 0xc2, 0xa0, 0xbf,
+-      0x79, 0xf0, 0x56, 0xa2, 0x89, 0x7d, 0x05, 0x59, 0xc6, 0x8f, 0x7b, 0x26,
+-      0xc2, 0xf4, 0xb3, 0x6b, 0x79, 0xc8, 0x73, 0x99, 0xf5, 0xf1, 0x6f, 0x2a,
+-      0xf5, 0x83, 0x73, 0xd5, 0x1a, 0x44, 0x6b, 0x35, 0x7c, 0x7e, 0xe2, 0x23,
+-      0xf8, 0x57, 0xc6, 0xed, 0x4d, 0x49, 0x70, 0x0e, 0x11, 0x22, 0x0f, 0x9c,
+-      0x3c, 0x22, 0xf7, 0x1c, 0xd1, 0x18, 0x6d, 0x70, 0xe8, 0xcc, 0x6d, 0xf5,
+-      0xdc, 0x79, 0x87, 0x93, 0x7d, 0x92, 0x15, 0xb3, 0xec, 0xcf, 0x07, 0xcb,
+-      0x71, 0xef, 0xa1, 0x13, 0xf4, 0x91, 0x12, 0x2c, 0x7a, 0xc0, 0x8d, 0xcf,
+-      0x1f, 0xc9, 0x90, 0x3b, 0xa8, 0x90, 0xfd, 0xbc, 0x69, 0x12, 0x85, 0x39,
+-      0xa3, 0x11, 0xdc, 0xb9, 0x3f, 0x83, 0xe1, 0x02, 0xcf, 0x0b, 0x85, 0xe2,
+-      0xff, 0x43, 0xc5, 0x09, 0xf2, 0x88, 0x40, 0xe7, 0xd5, 0xb4, 0xb1, 0xaa,
+-      0x48, 0x20, 0x2e, 0xe3, 0x6e, 0xa7, 0x8d, 0xf5, 0x71, 0x3e, 0x33, 0x1c,
+-      0x47, 0x82, 0x36, 0xf6, 0x55, 0xca, 0xbf, 0x87, 0x36, 0x16, 0xa7, 0x8d,
+-      0xc5, 0x69, 0x4f, 0x71, 0xda, 0x98, 0x3c, 0xfb, 0x1b, 0xa7, 0x8d, 0xc5,
+-      0x69, 0x63, 0xf1, 0xcc, 0x32, 0x1c, 0x25, 0xd3, 0xd8, 0x39, 0xd6, 0x4c,
+-      0x1c, 0x53, 0xec, 0xa8, 0x94, 0xbb, 0xf9, 0x23, 0xe4, 0xec, 0xd7, 0xf1,
+-      0x50, 0xd0, 0x46, 0x9f, 0xec, 0x4f, 0x67, 0xc8, 0x79, 0xdc, 0xf8, 0x75,
+-      0x56, 0x38, 0x7e, 0x33, 0xf3, 0xd8, 0x93, 0xe4, 0xf9, 0x2a, 0x9e, 0x30,
+-      0x25, 0x0f, 0x36, 0x79, 0xce, 0x58, 0x93, 0x12, 0xbe, 0x76, 0x12, 0x77,
+-      0x0f, 0x02, 0x37, 0x90, 0x17, 0xd6, 0x92, 0x97, 0x1c, 0x5e, 0xc4, 0xdf,
+-      0x07, 0x4f, 0xd0, 0xe6, 0x4f, 0xda, 0x7b, 0xbb, 0x54, 0xb6, 0x75, 0x66,
+-      0xb0, 0xde, 0x77, 0x3d, 0x7d, 0xf0, 0x7e, 0xd6, 0x75, 0x1e, 0x94, 0x3a,
+-      0x27, 0xd8, 0xb6, 0x1e, 0xfe, 0x35, 0xe7, 0xbf, 0xe3, 0x81, 0x5a, 0xbc,
+-      0xb1, 0x5f, 0x0f, 0xbf, 0x43, 0xcc, 0xab, 0x75, 0x58, 0xcb, 0xae, 0x0e,
+-      0x05, 0xb6, 0x5d, 0xad, 0xe6, 0xf9, 0x5e, 0xfb, 0x90, 0x13, 0xc7, 0x42,
+-      0xcb, 0xe0, 0x59, 0x54, 0xe4, 0x7c, 0xb4, 0xa5, 0x5a, 0xe1, 0x58, 0x7a,
+-      0xf8, 0x3c, 0xb9, 0x4a, 0x92, 0xed, 0x1f, 0xcd, 0x3c, 0x4e, 0x0c, 0xf9,
+-      0x22, 0x9e, 0x63, 0x7e, 0x3e, 0xf6, 0xa1, 0x97, 0xc9, 0x1d, 0xdd, 0x18,
+-      0x27, 0x07, 0x3c, 0x3e, 0x18, 0xfd, 0xa8, 0x93, 0xb8, 0xef, 0x59, 0x54,
+-      0x89, 0x4c, 0x5a, 0xb8, 0x62, 0x25, 0x9e, 0x19, 0x34, 0xb4, 0x1b, 0x94,
+-      0x3c, 0x2f, 0xcc, 0xef, 0xfd, 0x32, 0x2e, 0x8e, 0x22, 0x30, 0x79, 0x9e,
+-      0xdc, 0xf0, 0x9d, 0xb4, 0xc4, 0xb0, 0x93, 0xf4, 0x71, 0x3f, 0xc2, 0x49,
+-      0x0d, 0x27, 0xc6, 0x0d, 0x2c, 0x4c, 0x7a, 0xf1, 0xf0, 0x78, 0x10, 0x57,
+-      0xd3, 0x77, 0xb3, 0xe4, 0x87, 0x1f, 0x4a, 0x8a, 0x2f, 0xd6, 0x61, 0x62,
+-      0xbc, 0x8e, 0x3e, 0x22, 0xbc, 0xfc, 0x67, 0xf0, 0xd4, 0x9e, 0xb5, 0xf7,
+-      0x36, 0x8f, 0xa6, 0xf4, 0xfe, 0x18, 0xc7, 0x13, 0xf3, 0xea, 0xc7, 0x62,
+-      0xd0, 0xd3, 0xc0, 0x87, 0xdf, 0x4d, 0x7f, 0x52, 0xe2, 0xa3, 0xf8, 0xa3,
+-      0x86, 0x09, 0xf2, 0x9d, 0x52, 0x62, 0x6a, 0x79, 0xa4, 0xfe, 0xc2, 0xf7,
+-      0x15, 0x3d, 0xf7, 0x94, 0x6a, 0x59, 0xdf, 0x5b, 0xac, 0xc1, 0x77, 0x44,
+-      0x23, 0xf7, 0x30, 0xed, 0xe7, 0x62, 0xe4, 0x79, 0xf3, 0xd9, 0xfb, 0x6a,
+-      0x31, 0x63, 0x5f, 0x12, 0xff, 0xad, 0x36, 0xfe, 0xd1, 0x59, 0x8c, 0xf3,
+-      0xb3, 0x64, 0x7f, 0x76, 0xf2, 0xf4, 0x6c, 0xb9, 0x57, 0x34, 0xa9, 0x36,
+-      0x76, 0x1c, 0x83, 0x7e, 0xec, 0x15, 0x45, 0xf7, 0x7d, 0x95, 0xb1, 0xc1,
+-      0x45, 0x1b, 0x75, 0x4c, 0x68, 0xf4, 0xdd, 0xc6, 0x13, 0x33, 0x60, 0xc4,
+-      0xaf, 0x51, 0x5d, 0x16, 0x6c, 0x79, 0x6e, 0xa8, 0xca, 0xe7, 0x45, 0x82,
+-      0x3b, 0x12, 0x17, 0xc8, 0x17, 0x89, 0xc1, 0x9d, 0xf4, 0x97, 0x35, 0x76,
+-      0x2c, 0x3a, 0x61, 0xef, 0xfd, 0xde, 0x3a, 0x11, 0xa7, 0x8f, 0x2c, 0x43,
+-      0xc5, 0xb0, 0x07, 0x9f, 0xb3, 0xe3, 0xd0, 0x43, 0x56, 0x0d, 0xfd, 0xe5,
+-      0xae, 0x43, 0x81, 0xce, 0xeb, 0xe9, 0x2f, 0xf5, 0x4b, 0x25, 0x86, 0x31,
+-      0x6e, 0xa7, 0x0c, 0x73, 0x94, 0xd8, 0xf2, 0x50, 0xb3, 0x31, 0xf9, 0x32,
+-      0xf2, 0x3e, 0xb3, 0x6b, 0xa0, 0x16, 0x7f, 0xff, 0xc0, 0x71, 0x7b, 0x2d,
+-      0xe4, 0x4e, 0x9e, 0x27, 0x07, 0x7c, 0xb6, 0x7f, 0xc4, 0xf8, 0xfb, 0x1e,
+-      0xc6, 0xbc, 0x18, 0xfd, 0x68, 0xe7, 0x80, 0xb5, 0xec, 0xf9, 0xc5, 0xf1,
+-      0xb5, 0x55, 0x08, 0x32, 0x26, 0xb9, 0xd1, 0x3f, 0xa0, 0x0f, 0x76, 0x30,
+-      0x06, 0x9d, 0x5d, 0x6c, 0x52, 0x16, 0x0f, 0x86, 0x06, 0x04, 0x53, 0x4f,
+-      0xdd, 0x52, 0x8b, 0xf8, 0xff, 0xd0, 0x38, 0xbe, 0xcf, 0xd9, 0xf7, 0x08,
+-      0xeb, 0xb0, 0xe9, 0xc8, 0x52, 0xca, 0xdc, 0x44, 0x1f, 0x64, 0x5e, 0xcd,
+-      0x7c, 0x67, 0xc3, 0x7e, 0xf1, 0x0b, 0xb4, 0x48, 0x9e, 0xd6, 0x6d, 0x06,
+-      0xcc, 0x57, 0xe9, 0x43, 0x25, 0xe4, 0x3a, 0x0f, 0xa6, 0xec, 0xe7, 0x73,
+-      0x72, 0x15, 0x46, 0x18, 0x8b, 0x69, 0xa3, 0x25, 0x86, 0x0f, 0x33, 0xc8,
+-      0xeb, 0x16, 0x72, 0x3e, 0xca, 0xb2, 0x1e, 0x80, 0x1c, 0x02, 0xc4, 0x27,
+-      0x1c, 0x25, 0x08, 0x1e, 0xf5, 0xf3, 0x98, 0xcf, 0x83, 0x8a, 0xc8, 0xaa,
+-      0x98, 0x79, 0x94, 0x75, 0x47, 0x33, 0xb6, 0x2d, 0xfe, 0x3d, 0xe7, 0x3d,
+-      0x41, 0x5b, 0xff, 0x04, 0xb1, 0x7e, 0x72, 0x2f, 0xd0, 0x7f, 0x30, 0x6f,
+-      0xdb, 0x29, 0xb6, 0xdf, 0x4e, 0xcc, 0xbb, 0x40, 0x9b, 0xed, 0xe3, 0x7c,
+-      0x0f, 0x8d, 0x18, 0xc1, 0x46, 0x35, 0xa0, 0x4d, 0x70, 0x9e, 0x7b, 0xc6,
+-      0x54, 0x0c, 0x0c, 0x2e, 0xc3, 0x28, 0xf3, 0xa0, 0xde, 0xb4, 0xf8, 0x88,
+-      0x94, 0x39, 0x89, 0x6e, 0xfa, 0xc8, 0x2f, 0x17, 0x2b, 0x88, 0x7d, 0x5c,
+-      0xf6, 0xbe, 0x3b, 0x99, 0xef, 0x7f, 0x11, 0x9b, 0x12, 0x8f, 0x5b, 0x95,
+-      0x86, 0xde, 0x9f, 0x56, 0x99, 0x67, 0xd1, 0x36, 0x7b, 0x98, 0x9f, 0x2c,
+-      0x67, 0x7e, 0xd2, 0x5b, 0xb0, 0xcb, 0x33, 0xb4, 0xc3, 0x01, 0xc6, 0xb1,
+-      0x97, 0xd3, 0xf9, 0xb8, 0xf7, 0x83, 0x21, 0x3f, 0x16, 0x5e, 0x53, 0x89,
+-      0xa7, 0x0f, 0xe6, 0x65, 0xdb, 0x4b, 0x9b, 0x7c, 0x8a, 0x7a, 0xbe, 0x83,
+-      0x7a, 0x7d, 0x29, 0x25, 0x18, 0x15, 0xc4, 0x33, 0xe4, 0xd1, 0x5b, 0xc8,
+-      0x05, 0xbe, 0x97, 0xca, 0xdb, 0xe4, 0xe7, 0x27, 0xd6, 0x68, 0xf9, 0xf8,
+-      0xe0, 0x85, 0xba, 0x4f, 0xf6, 0x00, 0x5a, 0xd6, 0x72, 0x33, 0xd7, 0x49,
+-      0x5e, 0xc3, 0xb6, 0x23, 0xe4, 0x46, 0x4e, 0xcc, 0x49, 0x46, 0xb0, 0x22,
+-      0x55, 0xdf, 0xd6, 0x20, 0x9b, 0x3d, 0xe6, 0xe4, 0x39, 0xa0, 0x2b, 0x29,
+-      0xef, 0x0e, 0xd0, 0x50, 0xc1, 0xdc, 0xe9, 0xaf, 0x0b, 0xef, 0x2b, 0xf8,
+-      0xc4, 0x9f, 0xc1, 0x1d, 0xd7, 0x50, 0xa6, 0x14, 0xb9, 0xe3, 0x54, 0xe1,
+-      0x7d, 0x05, 0x37, 0xdb, 0xef, 0x2b, 0x70, 0x63, 0xc6, 0x84, 0xd3, 0xf9,
+-      0xa9, 0x94, 0x07, 0xb3, 0x27, 0x2e, 0x71, 0x50, 0x77, 0x49, 0xa4, 0x15,
+-      0x4f, 0x26, 0x14, 0xcc, 0x32, 0xfe, 0x27, 0xbe, 0x6f, 0xaf, 0x09, 0xd4,
+-      0xda, 0x7b, 0xf6, 0x5d, 0x91, 0x28, 0x0e, 0x27, 0xf4, 0xb6, 0xc7, 0x78,
+-      0x5e, 0x46, 0x3c, 0xad, 0xda, 0xa7, 0xe0, 0xa9, 0x80, 0x17, 0xa5, 0x47,
+-      0x64, 0xaf, 0xbb, 0x65, 0x39, 0x17, 0xaf, 0xb2, 0x76, 0xac, 0x13, 0xfb,
+-      0xe6, 0x1c, 0x1e, 0x09, 0x54, 0x09, 0x06, 0x1e, 0x36, 0x65, 0xdd, 0xd2,
+-      0x40, 0x5f, 0xa2, 0x96, 0xfc, 0xba, 0xbe, 0xb3, 0x15, 0xf5, 0xe6, 0xcf,
+-      0x1c, 0xb5, 0x28, 0x39, 0x72, 0x87, 0x26, 0x6b, 0xf6, 0xdf, 0xe0, 0x9c,
+-      0xf5, 0x12, 0xbb, 0x7a, 0x52, 0xf9, 0xf8, 0xd9, 0x9a, 0xb1, 0xaa, 0x45,
+-      0x2f, 0xbd, 0xe4, 0x27, 0x6a, 0xf2, 0xa2, 0x5d, 0xa6, 0x22, 0x92, 0x23,
+-      0xfe, 0xd4, 0xe1, 0x04, 0xf9, 0x82, 0xc4, 0xd2, 0x0a, 0x1e, 0x95, 0xe4,
+-      0x8d, 0x3f, 0x67, 0x2c, 0xbd, 0x27, 0x94, 0x0b, 0xca, 0x9b, 0x2c, 0x6a,
+-      0xc8, 0xc5, 0xe9, 0x03, 0x38, 0x12, 0xd2, 0xdb, 0x37, 0x38, 0xa2, 0x4f,
+-      0x33, 0x07, 0x0b, 0x2f, 0x63, 0x4e, 0xbe, 0x2a, 0x90, 0xc1, 0x2e, 0xf2,
+-      0xc0, 0x9d, 0xcc, 0xc5, 0x3b, 0x68, 0x9b, 0x9d, 0xfb, 0x19, 0xdb, 0x1c,
+-      0x97, 0x73, 0x71, 0x2d, 0x14, 0xdf, 0x40, 0x0e, 0xd0, 0xe5, 0x51, 0xc5,
+-      0x5e, 0xc5, 0x77, 0x02, 0x1d, 0xaf, 0x12, 0xa3, 0x1b, 0x19, 0x37, 0xc4,
+-      0xde, 0xf7, 0xa4, 0xf4, 0x4e, 0x2a, 0xa0, 0xa6, 0x92, 0xb9, 0xe3, 0xbd,
+-      0xe3, 0xcd, 0xf4, 0x9b, 0xfc, 0x33, 0x73, 0xce, 0x25, 0x75, 0xcc, 0x39,
+-      0xaf, 0x43, 0xef, 0x10, 0xed, 0x9f, 0xbe, 0x74, 0xff, 0x00, 0xc8, 0xcf,
+-      0xd4, 0x9d, 0x9c, 0xbf, 0xdc, 0x11, 0x04, 0x2e, 0xb6, 0xa3, 0xb1, 0xad,
+-      0xc4, 0x21, 0x32, 0xe8, 0xed, 0x6f, 0x90, 0xa7, 0x75, 0x31, 0x3f, 0xdd,
+-      0xc2, 0x5c, 0x3e, 0xc6, 0x5c, 0x3e, 0xc6, 0x7a, 0xa9, 0x21, 0xb9, 0x4f,
+-      0x64, 0xb4, 0x9f, 0x61, 0xfe, 0xf3, 0x39, 0xf2, 0x9f, 0xa1, 0x07, 0x44,
+-      0xae, 0x59, 0xb8, 0xf7, 0xf0, 0x75, 0x48, 0xd2, 0x9e, 0xee, 0xe1, 0xb5,
+-      0x81, 0x07, 0xe6, 0xe3, 0x6e, 0xe6, 0xf1, 0xb1, 0xf1, 0x65, 0x18, 0x64,
+-      0x26, 0xba, 0xed, 0xf0, 0x47, 0xd0, 0x43, 0x3e, 0xb5, 0x9c, 0x18, 0xbd,
+-      0xe1, 0x60, 0xc6, 0xc6, 0x6c, 0xc1, 0xfc, 0x1f, 0x67, 0x80, 0xd7, 0xc8,
+-      0xc9, 0x06, 0x53, 0x27, 0x6c, 0x9e, 0xe6, 0x62, 0x7c, 0x28, 0x25, 0x2e,
+-      0x85, 0xf7, 0x1b, 0x5d, 0x2b, 0x55, 0x6b, 0x59, 0xd9, 0xe2, 0x40, 0xff,
+-      0x1b, 0xf4, 0xd5, 0x9a, 0x23, 0x2a, 0x6a, 0x87, 0x25, 0x57, 0x27, 0x3f,
+-      0x22, 0x46, 0x3f, 0x47, 0x8c, 0xae, 0x3c, 0x94, 0xcf, 0xcb, 0x13, 0xcc,
+-      0xbb, 0x6a, 0x8d, 0x7c, 0x6e, 0xbe, 0x67, 0x40, 0xf6, 0xe8, 0xb8, 0xf1,
+-      0x1d, 0xda, 0xfe, 0xa9, 0x82, 0xed, 0x9f, 0x2e, 0x60, 0xb0, 0xc5, 0xdc,
+-      0xfc, 0x35, 0x1b, 0x7f, 0xf3, 0xb9, 0xf9, 0xc2, 0x61, 0xa3, 0x2b, 0x4c,
+-      0x8c, 0xbe, 0xfa, 0x90, 0xf4, 0xaf, 0xa1, 0x96, 0x78, 0x32, 0x93, 0x58,
+-      0x52, 0x35, 0x2c, 0xeb, 0x33, 0x81, 0xce, 0x09, 0xd5, 0x67, 0xf7, 0xb1,
+-      0x9d, 0xb2, 0xf5, 0xd2, 0x07, 0xbe, 0x9a, 0x30, 0xb4, 0xad, 0x4a, 0xc0,
+-      0x5c, 0x4d, 0x7d, 0x1e, 0xc9, 0x5c, 0x87, 0xce, 0xc1, 0x3a, 0x1c, 0x4b,
+-      0x4b, 0x7c, 0x91, 0xf6, 0x25, 0x17, 0x77, 0xe2, 0x9d, 0xfd, 0x73, 0xf1,
+-      0xce, 0xd8, 0xe5, 0x3c, 0x7c, 0x47, 0x2a, 0x7a, 0x3f, 0xc3, 0xeb, 0x2a,
+-      0xc9, 0xc3, 0xbf, 0xc7, 0x3c, 0xfc, 0x0d, 0x45, 0xd6, 0x10, 0x55, 0x7c,
+-      0x62, 0x91, 0x83, 0xf1, 0x45, 0xf7, 0x7f, 0xd7, 0x11, 0x97, 0xfb, 0xc8,
+-      0xfe, 0x07, 0xf8, 0xff, 0xb3, 0x8c, 0xe7, 0xc3, 0x9c, 0x89, 0x68, 0xad,
+-      0x03, 0x4f, 0x2f, 0x8e, 0x47, 0x65, 0x9d, 0xb4, 0x9f, 0x3c, 0x65, 0x0e,
+-      0xe3, 0xe1, 0xdf, 0xa7, 0xea, 0xc3, 0x0b, 0x1d, 0x0e, 0x5c, 0x34, 0xf5,
+-      0xf6, 0x03, 0xbc, 0xf6, 0x4c, 0x56, 0x7c, 0x31, 0x4c, 0xfc, 0x5a, 0x59,
+-      0xf0, 0xc5, 0x5a, 0x94, 0xd3, 0xce, 0xe7, 0xd2, 0x5e, 0x7f, 0x9c, 0xd2,
+-      0x07, 0x9f, 0xa1, 0x9d, 0xd6, 0x5e, 0xb2, 0x53, 0x59, 0xa3, 0x95, 0xbc,
+-      0xa6, 0x9d, 0x79, 0xcd, 0xf4, 0xe7, 0xa5, 0x8f, 0xa3, 0x2f, 0x7b, 0x1f,
+-      0xee, 0xdd, 0xab, 0x77, 0x39, 0x1d, 0x71, 0x4b, 0x33, 0xba, 0x99, 0xa3,
+-      0x75, 0x23, 0xb0, 0xc8, 0xe8, 0xb8, 0xa0, 0xe8, 0x9d, 0x3f, 0x54, 0xca,
+-      0x99, 0xf3, 0x9d, 0xc1, 0xf6, 0x51, 0x3d, 0x98, 0x51, 0x0c, 0xdc, 0x40,
+-      0x8c, 0x7b, 0x78, 0xa4, 0x84, 0x76, 0xb8, 0x1e, 0x47, 0x06, 0xf5, 0x70,
+-      0x1c, 0x26, 0x31, 0xb4, 0xde, 0x5f, 0xa6, 0x5c, 0xc0, 0x69, 0xf3, 0x2c,
+-      0xb6, 0x67, 0xe7, 0x60, 0xbd, 0x26, 0x7b, 0x9a, 0xd6, 0x63, 0x62, 0xf0,
+-      0x02, 0x71, 0xa8, 0x9d, 0xdc, 0x4a, 0xf2, 0x06, 0x0b, 0x7b, 0x42, 0x57,
+-      0x63, 0x8b, 0xed, 0xbf, 0xa5, 0xf2, 0x4e, 0x0b, 0xcf, 0x3c, 0xc3, 0x20,
+-      0x4e, 0x48, 0x6e, 0xee, 0x9b, 0xb6, 0x3f, 0x57, 0xd6, 0x75, 0x1b, 0xab,
+-      0xf2, 0xf7, 0x95, 0xff, 0x58, 0x99, 0x29, 0x1c, 0x1a, 0x91, 0xf5, 0x85,
+-      0x19, 0xca, 0xe3, 0x83, 0x0d, 0xbe, 0x1e, 0xc6, 0x8f, 0xfb, 0xcd, 0x1c,
+-      0x5e, 0x5f, 0x5c, 0x86, 0x29, 0xaf, 0x82, 0xd0, 0xd5, 0x61, 0xe9, 0x83,
+-      0x9f, 0x73, 0x96, 0xff, 0x93, 0xd2, 0xce, 0x82, 0xc2, 0x9a, 0xc3, 0x3b,
+-      0x35, 0x8c, 0x55, 0x3c, 0x97, 0xe7, 0x03, 0xe5, 0xbc, 0x78, 0xfd, 0x47,
+-      0x56, 0xd4, 0x2b, 0xd7, 0x89, 0xd9, 0xb3, 0xc4, 0x7f, 0x67, 0x28, 0x77,
+-      0x12, 0x6f, 0xe7, 0x87, 0x66, 0x28, 0xeb, 0xd3, 0xc5, 0x3a, 0x2f, 0x22,
+-      0x3b, 0xf2, 0x22, 0xe7, 0x53, 0x0f, 0x4e, 0xc1, 0x55, 0x78, 0x56, 0x5e,
+-      0xf6, 0x81, 0xb9, 0xc8, 0x43, 0x65, 0x2d, 0xfe, 0x1c, 0x86, 0xf6, 0x0b,
+-      0x6f, 0xb4, 0xac, 0x40, 0xc3, 0x39, 0x6c, 0x3f, 0x7a, 0x42, 0xe9, 0x48,
+-      0xbd, 0x6b, 0xa1, 0x74, 0x46, 0x6c, 0x8e, 0xbd, 0xdf, 0x59, 0xda, 0xe8,
+-      0x53, 0xda, 0xb3, 0x81, 0xf0, 0xfd, 0x0c, 0xbe, 0x5a, 0x44, 0x9e, 0x63,
+-      0x97, 0xb1, 0x9d, 0xe0, 0x35, 0xc3, 0x7e, 0x66, 0xe8, 0xb8, 0x3d, 0xce,
+-      0xf7, 0xeb, 0xe1, 0x9b, 0x56, 0xb4, 0x5d, 0xea, 0x16, 0xe5, 0x9a, 0xcf,
+-      0x89, 0x16, 0xd9, 0x8a, 0xff, 0x8f, 0x17, 0x64, 0x2f, 0x25, 0x77, 0xce,
+-      0x97, 0xe9, 0xa4, 0xec, 0x25, 0xa1, 0x28, 0x4e, 0x35, 0x4f, 0x97, 0xbf,
+-      0x38, 0xd6, 0x83, 0xef, 0x69, 0x2f, 0x5f, 0xf6, 0xe3, 0xb5, 0xb2, 0x4f,
+-      0xea, 0x54, 0xf3, 0x24, 0xfe, 0xce, 0x5e, 0xd7, 0x78, 0xd3, 0xde, 0xdf,
+-      0xb9, 0xcb, 0x6c, 0x89, 0x96, 0xe1, 0xa3, 0x50, 0xaf, 0x8a, 0x2f, 0x2c,
+-      0xb3, 0xf9, 0x76, 0xb4, 0xbd, 0x8c, 0x39, 0xb7, 0xdb, 0x88, 0xde, 0xef,
+-      0x46, 0x2e, 0x47, 0x9e, 0xd0, 0x71, 0x51, 0x39, 0xa6, 0xdc, 0x11, 0xd0,
+-      0xb7, 0xbd, 0x4d, 0xfe, 0xf3, 0x6c, 0x20, 0xce, 0x39, 0x37, 0x7c, 0x03,
+-      0x8a, 0x6e, 0x6e, 0x62, 0x8c, 0x7d, 0x86, 0x39, 0xed, 0xc6, 0x40, 0xbf,
+-      0x7d, 0xcf, 0x53, 0x89, 0xac, 0xc1, 0x95, 0xf6, 0xfb, 0x26, 0xda, 0x61,
+-      0x64, 0x5e, 0x94, 0x35, 0x38, 0xfe, 0x8e, 0x61, 0xa1, 0x7d, 0x6d, 0x23,
+-      0x82, 0xf6, 0xf7, 0xba, 0xc2, 0x3b, 0x29, 0x3a, 0x50, 0x6f, 0x7f, 0x7f,
+-      0x1a, 0x0d, 0x99, 0x4b, 0x6b, 0xd5, 0xe8, 0x35, 0x2d, 0xeb, 0x49, 0x53,
+-      0x9e, 0x57, 0xbb, 0xb4, 0xb7, 0x7c, 0x8d, 0x83, 0x39, 0x10, 0x21, 0x25,
+-      0x96, 0x7f, 0x27, 0xcf, 0xe5, 0xe7, 0xc5, 0x56, 0xbc, 0x67, 0x6f, 0xb9,
+-      0xfd, 0xac, 0x93, 0xfd, 0xce, 0xa5, 0x05, 0x4b, 0x9c, 0xf8, 0x4e, 0xa2,
+-      0x2a, 0xe6, 0xe1, 0xef, 0xed, 0x4b, 0x4a, 0xb0, 0x25, 0x44, 0x0e, 0x7a,
+-      0xd5, 0x19, 0x9c, 0xcf, 0x38, 0x71, 0x26, 0x11, 0x0f, 0x8d, 0xb1, 0xbf,
+-      0x53, 0x09, 0x15, 0xa7, 0x47, 0xfa, 0x42, 0x87, 0xec, 0xbe, 0x5f, 0x45,
+-      0xef, 0x51, 0xb9, 0x0f, 0xd9, 0x8e, 0x0d, 0x89, 0xf3, 0x8c, 0xbb, 0xd2,
+-      0x96, 0xac, 0x05, 0xe8, 0xb9, 0x8d, 0xcc, 0x9f, 0x55, 0x47, 0x10, 0xb7,
+-      0x30, 0xde, 0x3d, 0x97, 0xe8, 0x86, 0x6b, 0xb1, 0xde, 0xf5, 0x2d, 0x72,
+-      0x96, 0xaa, 0x88, 0x1e, 0x7c, 0x4b, 0xe9, 0x20, 0x37, 0x74, 0x63, 0x32,
+-      0x21, 0x7e, 0x21, 0xef, 0xac, 0xf9, 0x34, 0x8e, 0x91, 0x23, 0x3f, 0x9b,
+-      0xd0, 0x70, 0xbe, 0xd9, 0x83, 0x0c, 0x39, 0xf3, 0x77, 0x12, 0x6e, 0x7c,
+-      0x95, 0x9c, 0xf9, 0x91, 0x11, 0x59, 0xb3, 0x6c, 0x45, 0x4b, 0x42, 0xd6,
+-      0xab, 0xc9, 0x03, 0xc7, 0xbc, 0xb4, 0x6d, 0xcb, 0xea, 0x35, 0x67, 0xd3,
+-      0x9f, 0xce, 0xb2, 0x4f, 0x59, 0xe7, 0x8c, 0x62, 0x35, 0x79, 0xd0, 0x23,
+-      0x63, 0x3e, 0x3c, 0xcf, 0x5c, 0x21, 0xc9, 0x7a, 0xcf, 0x25, 0xfc, 0x18,
+-      0xc8, 0xf8, 0xf0, 0x14, 0x73, 0x86, 0x9d, 0x3c, 0x97, 0xf7, 0x1f, 0x95,
+-      0x18, 0x41, 0xf2, 0xf2, 0x93, 0xa8, 0x18, 0xb8, 0x02, 0x9b, 0xd7, 0x3e,
+-      0x0a, 0x75, 0xe0, 0x04, 0x8f, 0x6b, 0xc9, 0x21, 0xae, 0x45, 0x6a, 0x24,
+-      0x82, 0xd4, 0xd8, 0x8b, 0xe8, 0x1f, 0x91, 0x71, 0xc9, 0x7b, 0x6c, 0x64,
+-      0x0f, 0x12, 0xb9, 0xe7, 0x80, 0x17, 0xe9, 0x31, 0xe9, 0xa7, 0x96, 0x7d,
+-      0xff, 0xb9, 0xed, 0xff, 0xab, 0xb5, 0xf9, 0x13, 0xd2, 0xf6, 0xa3, 0x7f,
+-      0xa4, 0x7d, 0xd1, 0x95, 0xac, 0xbd, 0xb4, 0x17, 0xd6, 0x5e, 0xdc, 0x6c,
+-      0xd3, 0x03, 0x47, 0x24, 0xb7, 0xb6, 0x12, 0x7a, 0x74, 0xb7, 0x62, 0xb4,
+-      0x55, 0x28, 0xe7, 0xb1, 0x3b, 0x2b, 0xef, 0x45, 0x28, 0xc5, 0x53, 0xc4,
+-      0x6b, 0x57, 0x48, 0xd7, 0xbe, 0x45, 0xdb, 0x59, 0x4e, 0x8c, 0x7b, 0xd5,
+-      0xbc, 0x1a, 0x71, 0x4d, 0xf4, 0x57, 0x8a, 0x17, 0x06, 0xdd, 0xc4, 0xa6,
+-      0x08, 0xf2, 0xcf, 0xc8, 0x79, 0xf0, 0x83, 0x84, 0x97, 0xf3, 0xd5, 0x98,
+-      0x33, 0x1c, 0x0d, 0xf2, 0x0c, 0x9e, 0x7d, 0xed, 0x54, 0x62, 0x23, 0x0e,
+-      0x51, 0xde, 0xe7, 0x12, 0x17, 0x39, 0x3f, 0x9d, 0xd4, 0xbf, 0xe8, 0x3b,
+-      0x5e, 0xd0, 0x75, 0x1f, 0x75, 0x5d, 0x87, 0x67, 0x12, 0x5f, 0xc4, 0x23,
+-      0x94, 0xff, 0xe1, 0x41, 0x23, 0x3a, 0x5f, 0x39, 0x49, 0xfc, 0x2e, 0xc5,
+-      0x69, 0xb6, 0x7d, 0x07, 0x33, 0xf7, 0x29, 0xe9, 0x2b, 0x25, 0xeb, 0xa5,
+-      0x0a, 0xde, 0x5a, 0x72, 0x12, 0x13, 0xfc, 0xef, 0x07, 0x83, 0xf2, 0x1c,
+-      0x5a, 0x35, 0xfb, 0x10, 0xfd, 0xf8, 0xed, 0xdc, 0xa4, 0x87, 0xbc, 0x6b,
+-      0x55, 0xf3, 0x49, 0xec, 0x4a, 0xcb, 0xb5, 0xf5, 0xe8, 0x1f, 0xbc, 0x00,
+-      0x47, 0xa8, 0x04, 0x77, 0x78, 0x9b, 0x69, 0xeb, 0x39, 0xec, 0xce, 0x34,
+-      0xcf, 0xc8, 0x73, 0xe2, 0xaa, 0x19, 0xf2, 0x4c, 0xd6, 0xa9, 0x44, 0x29,
+-      0xbe, 0xc3, 0x3a, 0x9b, 0x89, 0x15, 0xf9, 0x7b, 0x38, 0xe4, 0xfe, 0xc4,
+-      0xfa, 0x0c, 0xfb, 0x48, 0xd8, 0x6d, 0xcc, 0x50, 0x0e, 0xd0, 0x0f, 0xab,
+-      0x17, 0xcf, 0x50, 0x52, 0x69, 0xc9, 0x35, 0x5e, 0xc4, 0x13, 0x0f, 0xe4,
+-      0x75, 0x78, 0xc8, 0xdc, 0x88, 0x74, 0xa6, 0xba, 0xd0, 0xde, 0x4b, 0x85,
+-      0x7b, 0x6d, 0xf2, 0x3c, 0x88, 0x51, 0x78, 0x17, 0xc0, 0xe5, 0x7b, 0x6c,
+-      0xdf, 0xc8, 0x56, 0x91, 0xcf, 0x97, 0xd3, 0xd6, 0x4a, 0x62, 0x5e, 0xc6,
+-      0xf9, 0x8d, 0x8b, 0x34, 0xec, 0x5d, 0xfa, 0xd9, 0x5a, 0x54, 0x69, 0xce,
+-      0x5f, 0x35, 0xbf, 0xc8, 0x7e, 0xaa, 0x62, 0x35, 0x91, 0x47, 0xec, 0x7d,
+-      0x59, 0xa1, 0xa5, 0x33, 0x19, 0xe7, 0xe4, 0x5e, 0x75, 0x0c, 0xaf, 0x27,
+-      0x6a, 0x63, 0xb5, 0x91, 0x6a, 0xe6, 0xf6, 0x17, 0x30, 0x30, 0xea, 0x44,
+-      0x15, 0x79, 0x7c, 0x65, 0xb2, 0x16, 0x6e, 0x7b, 0x5d, 0xf1, 0x0a, 0xf2,
+-      0xa7, 0xb9, 0xe4, 0x48, 0x75, 0xa8, 0x26, 0x4f, 0xf2, 0x84, 0x2c, 0xeb,
+-      0xa7, 0x8b, 0x2d, 0xeb, 0x4a, 0x1e, 0x65, 0x3c, 0xce, 0x85, 0xc4, 0x4f,
+-      0xa3, 0x68, 0xb4, 0xfd, 0xd5, 0x40, 0x93, 0xfd, 0xdd, 0x4a, 0x5f, 0xef,
+-      0x0a, 0x2d, 0x9c, 0xf8, 0x62, 0xa8, 0x61, 0x62, 0x26, 0xd4, 0xe1, 0x59,
+-      0x70, 0xb0, 0xad, 0x8f, 0x2f, 0xb5, 0xd0, 0x6a, 0xca, 0xfb, 0x04, 0x84,
+-      0xa7, 0x6d, 0x24, 0x4f, 0xeb, 0x0f, 0x19, 0x13, 0x8f, 0xe2, 0x7a, 0xc6,
+-      0x5d, 0xf7, 0xb0, 0x8f, 0xfd, 0x48, 0xce, 0xef, 0xcc, 0xcd, 0x23, 0xff,
+-      0xbf, 0x7a, 0xb1, 0x70, 0xb6, 0x0e, 0x79, 0x97, 0x08, 0x3a, 0x26, 0x4e,
+-      0xe2, 0x26, 0x96, 0xf1, 0x0c, 0xbf, 0x84, 0x64, 0xf6, 0x47, 0x18, 0xc8,
+-      0x4a, 0x3c, 0xc9, 0xe1, 0x06, 0xb6, 0x5d, 0x3e, 0xdc, 0x46, 0xae, 0xba,
+-      0x06, 0x9b, 0x27, 0x2c, 0xac, 0x0a, 0x4d, 0x62, 0xd5, 0x04, 0x39, 0xf0,
+-      0x44, 0xd1, 0x5f, 0x85, 0xbf, 0xad, 0x81, 0x3c, 0x7f, 0xe6, 0x26, 0xb6,
+-      0xc8, 0xda, 0x9e, 0x4a, 0x3f, 0x6c, 0xa1, 0x7d, 0x3f, 0x9e, 0x8a, 0x63,
+-      0xc3, 0x84, 0x60, 0xee, 0x7d, 0xe8, 0x9d, 0x90, 0xb5, 0xe2, 0xaf, 0x84,
+-      0xe6, 0x4f, 0xfc, 0x08, 0x2d, 0x13, 0xe9, 0xd0, 0x82, 0x89, 0x31, 0xca,
+-      0x9d, 0xa0, 0x6c, 0x83, 0xa1, 0xfa, 0x89, 0x91, 0x50, 0x70, 0xe2, 0x40,
+-      0x28, 0x30, 0xd1, 0x8e, 0x9d, 0x13, 0xeb, 0xb0, 0x63, 0x62, 0x1b, 0xb6,
+-      0x4f, 0x08, 0x6e, 0x4f, 0x61, 0xe5, 0xc4, 0xab, 0x58, 0x31, 0xf1, 0x2c,
+-      0x5a, 0x27, 0xce, 0x62, 0xf9, 0xc4, 0x8b, 0x68, 0x9b, 0x78, 0x89, 0x63,
+-      0x91, 0xb5, 0x67, 0x59, 0x77, 0x2e, 0xde, 0xe7, 0x9b, 0xbe, 0x97, 0x5a,
+-      0xd6, 0x56, 0xe4, 0x59, 0x30, 0x99, 0x43, 0x17, 0xd6, 0x6a, 0xe7, 0xd0,
+-      0xb7, 0x5f, 0xde, 0xb5, 0xd6, 0xa8, 0xf5, 0x42, 0xee, 0xe1, 0xbe, 0x28,
+-      0xcf, 0x06, 0xd0, 0xc6, 0xa6, 0xef, 0x1b, 0xd6, 0xb5, 0xa9, 0x4b, 0xf7,
+-      0x3c, 0xe5, 0x99, 0x2c, 0x89, 0x3d, 0xe7, 0xd1, 0x93, 0xfd, 0x8d, 0x15,
+-      0xd5, 0xa4, 0xac, 0x3c, 0x2b, 0x26, 0xf6, 0x70, 0x0e, 0x0f, 0xed, 0x3f,
+-      0x4f, 0x0e, 0x35, 0x69, 0xaf, 0x1d, 0xbd, 0xbd, 0x40, 0xde, 0xd3, 0xe3,
+-      0x27, 0x36, 0x9d, 0x43, 0xea, 0x28, 0x30, 0x71, 0x50, 0xfc, 0x70, 0x23,
+-      0xfd, 0x70, 0x52, 0x7c, 0x32, 0x4e, 0x4c, 0xbe, 0xcd, 0x83, 0xfb, 0xc8,
+-      0x93, 0x4a, 0x90, 0x1b, 0x2b, 0xc7, 0xd3, 0x23, 0x71, 0x6b, 0x9e, 0x21,
+-      0xef, 0x2e, 0x31, 0x72, 0x57, 0x32, 0xee, 0xbf, 0xc4, 0x6b, 0x93, 0x83,
+-      0xf0, 0xfb, 0x8c, 0x80, 0x6f, 0x1e, 0xcf, 0x4f, 0xa7, 0x27, 0xc9, 0x71,
+-      0xba, 0x30, 0xc5, 0x6f, 0xc9, 0x89, 0x81, 0x5e, 0xa4, 0xd3, 0xa2, 0xcf,
+-      0x76, 0xea, 0x53, 0x70, 0x51, 0xef, 0x6a, 0x25, 0x1e, 0x5a, 0x8a, 0xe0,
+-      0xa1, 0x8a, 0x8a, 0x7d, 0xc2, 0x25, 0xec, 0x77, 0x9f, 0x98, 0x03, 0xca,
+-      0x8b, 0xf8, 0x0e, 0x73, 0x98, 0xf2, 0x7d, 0xe4, 0x43, 0xc4, 0xca, 0xaa,
+-      0x88, 0x62, 0xac, 0x0a, 0x9c, 0xc3, 0xd3, 0x63, 0x4e, 0xb8, 0x93, 0x4e,
+-      0x4c, 0x12, 0x27, 0x1d, 0x49, 0xd9, 0x3f, 0xa0, 0x51, 0x16, 0x59, 0xa7,
+-      0x3a, 0x8b, 0x9c, 0x7d, 0x7f, 0x4f, 0xee, 0xcf, 0x7c, 0xd7, 0xee, 0xc7,
+-      0x49, 0xd9, 0xfb, 0x88, 0xa5, 0x3d, 0xa9, 0xef, 0xa1, 0x35, 0xed, 0xb1,
+-      0x9f, 0xf3, 0xdb, 0x9d, 0x7a, 0x15, 0xa9, 0xfd, 0x75, 0xb8, 0xdd, 0x7e,
+-      0xd6, 0xcf, 0x84, 0x46, 0xbd, 0xdd, 0x32, 0x6e, 0x22, 0x7a, 0x78, 0x1d,
+-      0xd6, 0x1e, 0xfe, 0x24, 0x8f, 0x59, 0xb8, 0xe9, 0x70, 0x27, 0x6e, 0x1c,
+-      0x8f, 0xa3, 0x63, 0xbc, 0x8f, 0xc7, 0x7a, 0x7c, 0x6c, 0xa8, 0x1a, 0x99,
+-      0x90, 0xc6, 0x1c, 0x7f, 0x3d, 0x73, 0x7c, 0xe1, 0x67, 0x1b, 0xf0, 0x34,
+-      0x71, 0x27, 0x18, 0xda, 0x80, 0x49, 0xdb, 0x17, 0x65, 0x8f, 0xe5, 0x06,
+-      0x6c, 0x67, 0xfe, 0x3e, 0x8a, 0x0d, 0xe8, 0xe1, 0xb5, 0x21, 0x7b, 0x0e,
+-      0x4e, 0x62, 0x19, 0xf3, 0xb3, 0x77, 0xae, 0x39, 0x89, 0x0f, 0x1f, 0x92,
+-      0xbe, 0x2f, 0x20, 0xb5, 0x77, 0x23, 0xdb, 0xcc, 0xa1, 0x7d, 0xfc, 0x9f,
+-      0x71, 0xe3, 0x10, 0xee, 0xac, 0x46, 0x35, 0x9e, 0x0d, 0x05, 0x3a, 0x06,
+-      0x94, 0x7f, 0xb6, 0xdb, 0xde, 0x9e, 0xfa, 0x11, 0x76, 0xa5, 0xce, 0xe3,
+-      0xe1, 0xcc, 0x4b, 0xe8, 0x4f, 0x4d, 0x9f, 0x53, 0x99, 0xcb, 0x37, 0x19,
+-      0x0f, 0xbe, 0x8f, 0x23, 0x63, 0x53, 0xc4, 0xde, 0x57, 0x78, 0xbc, 0xff,
+-      0x7e, 0x7a, 0xfe, 0x39, 0xdc, 0xbc, 0xdd, 0x48, 0x3e, 0x55, 0xe4, 0x6f,
+-      0x71, 0xab, 0xda, 0xc8, 0xed, 0x9a, 0x03, 0x7d, 0x5b, 0x58, 0x95, 0xfb,
+-      0x81, 0x46, 0xec, 0x05, 0x45, 0x6f, 0xff, 0x96, 0xe2, 0x61, 0xae, 0x21,
+-      0xcf, 0x45, 0xea, 0xd1, 0x1b, 0xa8, 0xef, 0xb2, 0x07, 0xbe, 0x0f, 0xe7,
+-      0x03, 0x4e, 0x94, 0x26, 0x65, 0x2d, 0x47, 0xde, 0x2b, 0x23, 0xef, 0x30,
+-      0xc9, 0xe9, 0xa5, 0xf2, 0xae, 0x89, 0xe4, 0x24, 0x63, 0x7f, 0x6e, 0x61,
+-      0x09, 0xe4, 0x39, 0xec, 0xeb, 0xb0, 0x71, 0x30, 0x8a, 0x1e, 0x53, 0x9e,
+-      0x31, 0xca, 0x8f, 0x7f, 0x5e, 0xf3, 0xf7, 0xd1, 0xcb, 0xf8, 0xb3, 0x9e,
+-      0x98, 0x78, 0xbb, 0x7d, 0x6f, 0xf6, 0xfb, 0xe8, 0x1b, 0xf9, 0x47, 0xb7,
+-      0xf0, 0x9d, 0x3e, 0x53, 0x9e, 0xe3, 0xd6, 0xcd, 0xf7, 0xbe, 0xc3, 0x66,
+-      0xbe, 0xec, 0x69, 0xa3, 0x4d, 0xe4, 0x16, 0xba, 0xb0, 0xbd, 0x36, 0xff,
+-      0x1e, 0x95, 0x0f, 0x7a, 0xe7, 0xd0, 0x5f, 0xda, 0xef, 0x1c, 0x92, 0xfb,
+-      0xfa, 0xf2, 0xbe, 0xaa, 0x27, 0x12, 0xf2, 0x1e, 0x09, 0x75, 0x99, 0x0b,
+-      0xaa, 0xd7, 0x45, 0x5e, 0xf8, 0xaa, 0x39, 0x13, 0xbd, 0x5e, 0x0b, 0xd7,
+-      0x53, 0x96, 0x63, 0x4d, 0x1f, 0x63, 0xe6, 0x12, 0xef, 0x70, 0xd9, 0xef,
+-      0x26, 0x39, 0xff, 0xa9, 0x7f, 0xff, 0x6e, 0x92, 0x37, 0x89, 0x93, 0x0a,
+-      0x2a, 0x8d, 0x5b, 0xf0, 0x9c, 0x1d, 0x13, 0x14, 0x54, 0x34, 0xc8, 0xba,
+-      0xa8, 0x1f, 0xcf, 0x18, 0x8d, 0xfe, 0x1a, 0xb9, 0xdf, 0xa5, 0x9c, 0xb3,
+-      0xe2, 0xde, 0x3a, 0xc6, 0x97, 0xff, 0x68, 0x2f, 0xfe, 0xf3, 0xd8, 0xb9,
+-      0x37, 0x4c, 0xce, 0xe8, 0x95, 0x67, 0x23, 0x67, 0x14, 0x9f, 0xc5, 0xdc,
+-      0x91, 0x92, 0x3d, 0xec, 0x0c, 0x8a, 0xe5, 0x6f, 0xd2, 0xcf, 0xde, 0x94,
+-      0x3d, 0x58, 0xe4, 0x3c, 0x7f, 0x85, 0x60, 0xcd, 0x8c, 0xfc, 0x73, 0x52,
+-      0xf6, 0x5e, 0x5f, 0x59, 0x0f, 0xd8, 0x5e, 0x78, 0xef, 0xa2, 0x94, 0x95,
+-      0x7a, 0x6f, 0xda, 0x6b, 0xc2, 0x2e, 0xe3, 0x37, 0xd6, 0x6b, 0xde, 0x5a,
+-      0x96, 0xfd, 0x45, 0xe1, 0xff, 0xf3, 0xe2, 0x33, 0x66, 0x14, 0x72, 0x4d,
+-      0xea, 0x88, 0xae, 0x2e, 0xd7, 0xe9, 0x4d, 0x39, 0x88, 0x7b, 0x67, 0xad,
+-      0x6e, 0xaf, 0x8c, 0x61, 0xec, 0x7d, 0x75, 0x54, 0xfb, 0x1d, 0x84, 0x79,
+-      0xfd, 0x8a, 0x3c, 0xff, 0xbe, 0x4f, 0x59, 0x3f, 0x2e, 0x31, 0x2a, 0x70,
+-      0xae, 0x26, 0xbf, 0xae, 0x73, 0x59, 0xc6, 0x47, 0xbc, 0xb2, 0xef, 0xaf,
+-      0xd4, 0x3e, 0xb7, 0xfb, 0x35, 0x2f, 0xd7, 0xfb, 0x46, 0x61, 0xbc, 0xb5,
+-      0xf6, 0xb3, 0x4a, 0x0f, 0xda, 0xbc, 0xc6, 0x31, 0x6d, 0xdc, 0xcb, 0xbc,
+-      0xef, 0xed, 0x67, 0xa4, 0xd0, 0xaf, 0x6a, 0x3f, 0xef, 0x75, 0xb9, 0x0f,
+-      0x91, 0xeb, 0xa9, 0x42, 0x1d, 0x3d, 0x1c, 0xb5, 0xfb, 0x57, 0x99, 0xbf,
+-      0x15, 0xfb, 0xa4, 0x3f, 0x2d, 0x2e, 0xb6, 0x31, 0x29, 0xf6, 0xd5, 0x5d,
+-      0xca, 0xd8, 0x74, 0xae, 0xf9, 0x3e, 0x6c, 0x4f, 0x88, 0x9e, 0xe5, 0x1d,
+-      0x95, 0xc4, 0x60, 0x9b, 0x6b, 0xb9, 0xe8, 0x6f, 0x4b, 0x91, 0xd6, 0xe2,
+-      0x38, 0xd4, 0x24, 0xcf, 0xe6, 0xb9, 0x68, 0xd3, 0x71, 0x94, 0x91, 0xdb,
+-      0x46, 0x79, 0x4d, 0xf6, 0xb4, 0x1c, 0x31, 0xf5, 0xe8, 0x13, 0xf8, 0x12,
+-      0x1c, 0x57, 0xd9, 0xeb, 0x5f, 0x6d, 0x69, 0xc8, 0x75, 0x93, 0xb9, 0xc9,
+-      0xf4, 0x15, 0x83, 0x32, 0xda, 0x8e, 0xbd, 0x17, 0xdb, 0x94, 0x67, 0xf7,
+-      0x06, 0x12, 0xf2, 0x0c, 0x59, 0x63, 0x8c, 0xfc, 0x10, 0xcf, 0x65, 0x64,
+-      0xff, 0xc3, 0x6f, 0xad, 0xf8, 0x4c, 0xd9, 0x67, 0x39, 0xbd, 0x4e, 0x09,
+-      0x71, 0x29, 0x10, 0xae, 0x52, 0x8a, 0xcf, 0x91, 0x5d, 0xfe, 0xdc, 0x44,
+-      0x9b, 0x39, 0x6f, 0x3f, 0xfb, 0x27, 0x67, 0x11, 0xb4, 0xa4, 0xe4, 0x5d,
+-      0x8c, 0xfa, 0xe4, 0x2a, 0x34, 0xe6, 0xea, 0x1d, 0xce, 0x02, 0xff, 0x08,
+-      0x63, 0x0d, 0xed, 0x66, 0x47, 0x20, 0x6c, 0x3f, 0xe3, 0x26, 0xef, 0xdc,
+-      0x78, 0x18, 0x7a, 0xe7, 0x1b, 0x2c, 0xff, 0xb1, 0xec, 0xf3, 0x56, 0xda,
+-      0x2b, 0x63, 0x2a, 0xfa, 0xb8, 0xbc, 0xdb, 0x87, 0x7a, 0x8c, 0x88, 0x7f,
+-      0x78, 0x50, 0x13, 0x09, 0xd3, 0x0f, 0x25, 0x7e, 0xcb, 0xf3, 0x71, 0xfa,
+-      0x01, 0xc9, 0xab, 0x5a, 0xb2, 0xf2, 0xfc, 0xb7, 0xec, 0x9b, 0xd6, 0xfd,
+-      0x6b, 0x1d, 0xc1, 0xc2, 0xfe, 0xe5, 0x62, 0xbc, 0xb7, 0xbc, 0x85, 0xbd,
+-      0xd5, 0xee, 0x79, 0x8c, 0x6f, 0x96, 0xbd, 0x6f, 0x60, 0xa3, 0x8d, 0x0d,
+-      0x9a, 0xa1, 0x1f, 0xfb, 0xa5, 0xa3, 0x1b, 0x8f, 0x2d, 0x32, 0xba, 0x8e,
+-      0xab, 0xb9, 0xb4, 0x8f, 0x38, 0x71, 0xad, 0x23, 0x3a, 0xc4, 0x6f, 0xff,
+-      0x77, 0x89, 0xcd, 0x37, 0xd9, 0x75, 0xf5, 0xe0, 0x3a, 0xb5, 0xf8, 0x6c,
+-      0xb5, 0x3c, 0x73, 0xa1, 0x77, 0x7c, 0x43, 0xe9, 0xc6, 0xd6, 0x90, 0xd1,
+-      0xbe, 0x4d, 0xd1, 0xdb, 0xbe, 0xac, 0xe8, 0xfe, 0x90, 0x22, 0xe5, 0xec,
+-      0x77, 0xe8, 0x5c, 0x8a, 0x9d, 0x2e, 0xf6, 0x71, 0x38, 0xa1, 0x87, 0x67,
+-      0xb0, 0xec, 0x39, 0xd3, 0xf0, 0x5d, 0x60, 0x9b, 0x3f, 0xe4, 0x31, 0x84,
+-      0x20, 0x96, 0xdb, 0xed, 0x46, 0x17, 0xba, 0xec, 0xf7, 0xa4, 0x76, 0x30,
+-      0x26, 0xc8, 0xfb, 0xb0, 0x62, 0xd0, 0x92, 0x75, 0x34, 0x31, 0xbd, 0xff,
+-      0x66, 0x48, 0x4e, 0xdd, 0xc3, 0x80, 0xed, 0x81, 0x37, 0xd2, 0x8d, 0x86,
+-      0x45, 0x86, 0x6f, 0x89, 0x6a, 0xd7, 0x0f, 0xca, 0xfb, 0x81, 0x96, 0x73,
+-      0x9c, 0x23, 0x90, 0x36, 0x72, 0x96, 0xd6, 0x50, 0x6d, 0xd7, 0x59, 0xa4,
+-      0x7e, 0x14, 0xae, 0x0f, 0xfd, 0xca, 0x4a, 0x6b, 0xd0, 0x6a, 0x0d, 0xa9,
+-      0x13, 0x1f, 0xd2, 0xf0, 0x1f, 0xd5, 0x13, 0x5c, 0xf9, 0xa5, 0x85, 0x59,
+-      0x52, 0x4f, 0xf6, 0xac, 0x7d, 0x1a, 0x77, 0x0d, 0xc8, 0x7b, 0x22, 0xc4,
+-      0x1f, 0xf5, 0xe8, 0x17, 0xc8, 0x35, 0xcb, 0xed, 0xf7, 0x6f, 0x49, 0x2c,
+-      0x59, 0x4f, 0x3c, 0xeb, 0x86, 0x16, 0xd2, 0xfb, 0xaf, 0x50, 0xe5, 0x1d,
+-      0x43, 0x8f, 0xc9, 0xbe, 0x9d, 0x03, 0x0b, 0xd4, 0xfc, 0xfe, 0x9e, 0xd8,
+-      0x1f, 0x7d, 0x5f, 0x11, 0xfb, 0x2a, 0x97, 0xf7, 0x15, 0xd5, 0xd9, 0xcf,
+-      0xa7, 0xac, 0x4f, 0x38, 0x0a, 0xfb, 0x15, 0x2f, 0xbf, 0xc7, 0x73, 0x23,
+-      0x79, 0xfd, 0x26, 0x79, 0x67, 0x1f, 0xc7, 0xba, 0x39, 0x21, 0x4b, 0x5a,
+-      0xff, 0x0f, 0xdd, 0x0f, 0x6b, 0xf2, 0xd0, 0x56, 0x00, 0x00, 0x00 };
++      0x9d, 0xbc, 0x0d, 0x78, 0x1b, 0xe5, 0x95, 0x36, 0x7c, 0xcf, 0x48, 0xb2,
++      0x65, 0x5b, 0xb6, 0xc7, 0x8e, 0x9c, 0x28, 0x6c, 0x9a, 0x68, 0xf0, 0x28,
++      0x51, 0xb0, 0x69, 0x47, 0x89, 0x03, 0x82, 0x55, 0x89, 0xea, 0x98, 0xc4,
++      0x81, 0x50, 0x9c, 0x12, 0x5a, 0xb3, 0x4b, 0x5b, 0xe1, 0xfc, 0x60, 0x42,
++      0xa0, 0xa1, 0xb0, 0xef, 0x9a, 0xef, 0x65, 0x5f, 0xab, 0xb6, 0x93, 0x38,
++      0x89, 0x2c, 0x39, 0x8e, 0x21, 0x61, 0xbf, 0x5e, 0x8b, 0x89, 0x9d, 0x38,
++      0x80, 0x6c, 0x85, 0x36, 0xdd, 0x0d, 0x7d, 0xd3, 0x8d, 0x36, 0x09, 0x60,
++      0xfe, 0xda, 0x40, 0xbb, 0x2c, 0xed, 0xcb, 0x07, 0xde, 0x14, 0x42, 0xd8,
++      0xb6, 0x40, 0xb7, 0x3f, 0x1b, 0x5a, 0xca, 0xbc, 0xf7, 0x19, 0x49, 0x89,
++      0x13, 0x28, 0xed, 0x7e, 0xbe, 0xae, 0xb9, 0xac, 0x99, 0x79, 0x7e, 0xce,
++      0x73, 0x9e, 0x73, 0xee, 0x73, 0x9f, 0x67, 0x9e, 0x19, 0x3f, 0x50, 0x8a,
++      0xfc, 0x5f, 0x39, 0x8f, 0x4f, 0x37, 0x6c, 0x5c, 0xbd, 0x60, 0xc1, 0xa7,
++      0x1b, 0xe4, 0xdc, 0x39, 0xdd, 0xe9, 0xc4, 0x9f, 0xf9, 0xe7, 0xff, 0x73,
++      0x0b, 0x7e, 0xcc, 0x9f, 0x03, 0xd0, 0x0a, 0xfd, 0xcb, 0x01, 0xb7, 0x1a,
++      0x71, 0xde, 0xdc, 0x68, 0xc0, 0xed, 0x88, 0x4c, 0xb4, 0xad, 0x36, 0x80,
++      0x68, 0xba, 0xce, 0xbf, 0x04, 0x7f, 0xb0, 0xe2, 0x5e, 0x27, 0xe4, 0xfa,
++      0xa7, 0x22, 0x1f, 0x74, 0x7e, 0xef, 0x72, 0xfd, 0xbd, 0x21, 0x07, 0xdc,
++      0x5a, 0x24, 0x0e, 0x6d, 0x2e, 0xdc, 0xb3, 0x58, 0xe7, 0x9b, 0xf3, 0xbe,
++      0xa9, 0xa0, 0xa2, 0xd0, 0xd6, 0x69, 0xeb, 0x7b, 0xf3, 0x7c, 0xb1, 0x92,
++      0x88, 0x86, 0x23, 0x19, 0xb4, 0xd4, 0xf7, 0x75, 0x5a, 0xe5, 0x46, 0x08,
++      0x6e, 0xc3, 0x68, 0xed, 0x53, 0x3c, 0xe1, 0xf5, 0x8b, 0xe0, 0x29, 0x36,
++      0x10, 0xbf, 0x28, 0x82, 0x96, 0x4b, 0xc6, 0x4a, 0xe3, 0xce, 0x88, 0x1b,
++      0xcd, 0x19, 0x77, 0xfc, 0x2f, 0x22, 0x06, 0x96, 0x65, 0x66, 0x95, 0xa2,
++      0xc2, 0x8d, 0x9e, 0xcc, 0xeb, 0x25, 0xb9, 0xf6, 0xea, 0xf3, 0xff, 0x83,
++      0xd3, 0x72, 0xff, 0xa7, 0xc7, 0x9c, 0x11, 0x60, 0x53, 0xc2, 0xb2, 0x8a,
++      0x22, 0x37, 0xdc, 0xa0, 0x46, 0x0c, 0xdf, 0x3e, 0x2c, 0x46, 0x9b, 0x86,
++      0xfb, 0x36, 0x37, 0xfc, 0xa7, 0x72, 0x74, 0x90, 0x0d, 0x8f, 0x3a, 0x10,
++      0xd5, 0x8e, 0xf3, 0xff, 0xec, 0xd9, 0xad, 0x61, 0x03, 0xbb, 0x47, 0xcf,
++      0xf0, 0xba, 0xd3, 0xbe, 0xd6, 0xbd, 0x6b, 0xf6, 0xec, 0x9b, 0xc2, 0xc7,
++      0xf1, 0xe0, 0xa8, 0xfc, 0xbe, 0x15, 0x9d, 0xf5, 0x0a, 0x26, 0x6f, 0x58,
++      0x07, 0x87, 0x61, 0xa0, 0x67, 0x97, 0xe2, 0xec, 0xaa, 0x57, 0x11, 0xf5,
++      0xea, 0xc1, 0x18, 0x27, 0xc1, 0x69, 0x20, 0x56, 0x1c, 0x09, 0x3b, 0xdf,
++      0x4e, 0x44, 0x34, 0x87, 0x61, 0x59, 0xc1, 0xd0, 0x0c, 0x38, 0xaa, 0x2c,
++      0xeb, 0x09, 0xd3, 0x03, 0xff, 0x97, 0x9e, 0x42, 0x7c, 0xb8, 0x05, 0xaa,
++      0xf1, 0x14, 0xba, 0x86, 0x9f, 0xc2, 0x43, 0x3b, 0x4b, 0x31, 0x39, 0x8d,
++      0xe3, 0x4d, 0xf9, 0xf0, 0xbd, 0x79, 0xd2, 0xb7, 0xc8, 0x51, 0xcf, 0xc3,
++      0x8d, 0x49, 0xc7, 0x6b, 0xfc, 0x2f, 0x65, 0xce, 0x58, 0x93, 0x33, 0xce,
++      0x95, 0xd9, 0xc4, 0x32, 0x3d, 0x17, 0x94, 0x89, 0x0f, 0x47, 0xf0, 0x5c,
++      0x42, 0xc1, 0xfa, 0x50, 0x05, 0xa2, 0x55, 0x32, 0x5e, 0xcb, 0x1a, 0x35,
++      0x4f, 0x59, 0x93, 0x9a, 0xf4, 0x35, 0x81, 0xe7, 0x79, 0x6f, 0x73, 0xe8,
++      0x0d, 0x2b, 0xeb, 0x95, 0xf6, 0xbe, 0x4e, 0x1b, 0x5a, 0xc9, 0xeb, 0x4e,
++      0xa4, 0x12, 0x88, 0x55, 0x44, 0x6e, 0xe4, 0xb9, 0x6e, 0xbe, 0xa3, 0xb8,
++      0xdd, 0xef, 0x26, 0xdc, 0x5f, 0x2a, 0x37, 0xd4, 0x7b, 0x2a, 0xe1, 0xc4,
++      0x0b, 0x94, 0xf9, 0x90, 0xb9, 0x0e, 0x2e, 0xe3, 0x6e, 0xb1, 0x39, 0x8e,
++      0xeb, 0x47, 0x16, 0x66, 0x14, 0xea, 0x4b, 0xbb, 0x6e, 0x6c, 0x4e, 0x59,
++      0xd6, 0x56, 0x33, 0x7a, 0x45, 0x09, 0x0d, 0xe2, 0x58, 0xa2, 0x05, 0xee,
++      0x48, 0xc0, 0x7f, 0x1a, 0x61, 0x2c, 0xc9, 0x78, 0xf1, 0x64, 0x02, 0xce,
++      0xc6, 0x79, 0x5e, 0x74, 0x65, 0x22, 0xb8, 0x3a, 0x63, 0xa2, 0x29, 0xf3,
++      0xa7, 0x2d, 0xeb, 0xda, 0x94, 0x9f, 0x63, 0xf8, 0x83, 0x95, 0x1b, 0x83,
++      0x8c, 0x2f, 0xf7, 0xbf, 0x27, 0x75, 0x11, 0xb6, 0x71, 0x8e, 0xb6, 0x70,
++      0xfe, 0x96, 0x87, 0xb2, 0xd1, 0x12, 0xe8, 0xe6, 0x69, 0x44, 0xb0, 0x34,
++      0x63, 0x70, 0x4e, 0x23, 0x58, 0x92, 0xaa, 0xd5, 0x86, 0x31, 0x1f, 0x51,
++      0x5f, 0xce, 0xb6, 0xb7, 0x73, 0xbc, 0x6d, 0x81, 0x16, 0x94, 0xd3, 0x46,
++      0xd2, 0x8b, 0xc2, 0x68, 0x64, 0xff, 0x2b, 0xfe, 0x8c, 0xfe, 0xaf, 0x67,
++      0xff, 0xef, 0xb0, 0xff, 0xac, 0xdd, 0x3f, 0x9c, 0xd7, 0xf0, 0xdc, 0x4d,
++      0x7b, 0xdc, 0x96, 0x76, 0x3a, 0x97, 0xa7, 0xbc, 0xd8, 0x9a, 0x36, 0x69,
++      0x73, 0x72, 0xcb, 0x87, 0xcd, 0x83, 0xb3, 0xb0, 0x65, 0x50, 0xf7, 0x3d,
++      0xcd, 0xdf, 0xdd, 0x23, 0x17, 0x61, 0xd3, 0xa0, 0x82, 0x3d, 0xc6, 0x45,
++      0xe8, 0xe2, 0xef, 0xdd, 0x83, 0xb3, 0xf1, 0xe0, 0xa0, 0x03, 0xe1, 0x69,
++      0xe7, 0x8f, 0x63, 0xd2, 0x71, 0x11, 0xe2, 0x23, 0x7e, 0x74, 0x25, 0x9e,
++      0xb7, 0x75, 0x58, 0x1e, 0xf9, 0x5e, 0xc1, 0x9f, 0xe9, 0x3b, 0x7e, 0xac,
++      0x4e, 0x68, 0xe8, 0x4a, 0x89, 0x1f, 0xb8, 0x69, 0x9b, 0xe2, 0x07, 0xbf,
++      0x06, 0x2a, 0x34, 0x74, 0x67, 0x0a, 0xf7, 0x15, 0x38, 0x39, 0x6f, 0x6b,
++      0x34, 0x37, 0xb6, 0xa6, 0xc4, 0x26, 0xa4, 0x4d, 0xb1, 0x0b, 0xf9, 0x5d,
++      0x4d, 0xbb, 0x2b, 0x85, 0x7f, 0x6f, 0x29, 0x82, 0xf7, 0x6b, 0x78, 0xb3,
++      0x41, 0xae, 0xd3, 0xde, 0x43, 0x52, 0xa6, 0x1f, 0xfb, 0xd2, 0xe2, 0xa7,
++      0x7e, 0x34, 0x26, 0x26, 0xd8, 0x7e, 0x03, 0xdb, 0x36, 0xf1, 0xcf, 0x99,
++      0x7a, 0xfc, 0x53, 0x26, 0x88, 0x7f, 0xa4, 0x1e, 0xbf, 0x93, 0xf1, 0xe3,
++      0x60, 0x66, 0x16, 0xbe, 0x9d, 0xf1, 0xe1, 0x5b, 0x9c, 0xbf, 0xc7, 0x33,
++      0x2d, 0xb4, 0x7d, 0x0d, 0x07, 0x32, 0xa2, 0xff, 0x22, 0x8e, 0xb7, 0x14,
++      0xdd, 0x83, 0xb5, 0xc1, 0x63, 0xb4, 0xad, 0x7f, 0x34, 0xaf, 0x41, 0xb6,
++      0xba, 0xc1, 0xb6, 0xc9, 0xad, 0xbc, 0xbe, 0x6d, 0xb0, 0x36, 0x7a, 0x89,
++      0x62, 0x59, 0x6a, 0xa8, 0x2e, 0x7c, 0x54, 0x55, 0x31, 0xe9, 0xd5, 0xfd,
++      0x59, 0x55, 0xf7, 0x47, 0xe1, 0x42, 0x82, 0xbe, 0x11, 0xaf, 0xd1, 0x87,
++      0xe2, 0xb4, 0x29, 0xaf, 0x31, 0xcc, 0xf1, 0xe8, 0xfe, 0xb8, 0xea, 0xc6,
++      0x96, 0x94, 0xbe, 0x3b, 0xae, 0x7a, 0x10, 0xcf, 0x94, 0xe2, 0x17, 0x83,
++      0x7a, 0x6f, 0x5c, 0xfd, 0x3c, 0xe2, 0xd5, 0x96, 0xf5, 0xad, 0x10, 0x36,
++      0xce, 0x88, 0x20, 0x5a, 0x13, 0x41, 0x6c, 0x76, 0xc4, 0x8b, 0x54, 0x0a,
++      0x78, 0xa7, 0xcf, 0xf0, 0xfd, 0x9b, 0xd2, 0x82, 0xbf, 0x69, 0xd1, 0xfd,
++      0x7e, 0xb5, 0x2e, 0x3e, 0xac, 0x2e, 0xa2, 0x4b, 0xc3, 0xef, 0x8b, 0x2c,
++      0x43, 0x87, 0x7d, 0x4d, 0x81, 0x66, 0x78, 0xd0, 0x9d, 0xba, 0x02, 0x31,
++      0x6f, 0x6d, 0xeb, 0x0e, 0xb5, 0xf6, 0x8c, 0xa9, 0xea, 0x13, 0x2d, 0xaa,
++      0x65, 0xfd, 0x72, 0xe1, 0x3b, 0x96, 0x7f, 0xba, 0x65, 0x2d, 0x58, 0x28,
++      0x7d, 0xfa, 0x51, 0x15, 0x31, 0xb1, 0xd2, 0x9e, 0xc3, 0x52, 0x9c, 0x1a,
++      0xac, 0x66, 0x1f, 0x1a, 0xfe, 0xf5, 0x72, 0x3d, 0xb8, 0x4e, 0x2d, 0xc5,
++      0x9b, 0x23, 0xa5, 0x38, 0xc9, 0xf1, 0xfc, 0xe7, 0xa0, 0x0f, 0xbf, 0x1e,
++      0xb4, 0xac, 0x2f, 0x99, 0x7f, 0x89, 0x81, 0xea, 0x7e, 0xfc, 0xd3, 0xb8,
++      0x17, 0xbf, 0xe0, 0xdc, 0xbc, 0x91, 0x88, 0xde, 0x35, 0x0d, 0x7a, 0x74,
++      0x5c, 0x39, 0xf6, 0xd5, 0x0a, 0xd4, 0xb5, 0x54, 0x28, 0x7a, 0xf3, 0x76,
++      0xe8, 0xbe, 0x4b, 0x14, 0x2f, 0x4e, 0xa7, 0x35, 0xfc, 0x34, 0x5d, 0x1b,
++      0xfe, 0x21, 0xfb, 0xfc, 0xad, 0xf9, 0x84, 0x95, 0x9d, 0x2e, 0x7a, 0x13,
++      0x1d, 0x51, 0xcf, 0x29, 0xea, 0x39, 0x45, 0x3d, 0xa7, 0xa8, 0x67, 0xca,
++      0x70, 0x30, 0x45, 0x3d, 0x53, 0x77, 0xdf, 0xa2, 0x4d, 0x3d, 0xce, 0x79,
++      0x3c, 0x60, 0xcf, 0x63, 0x98, 0xf3, 0xf5, 0x17, 0xf8, 0x5f, 0x36, 0xb6,
++      0x3e, 0x6f, 0xfd, 0xad, 0x57, 0xc6, 0xd4, 0x3d, 0x3d, 0x87, 0x5f, 0x32,
++      0xb6, 0xe7, 0xac, 0x98, 0x26, 0xe3, 0x92, 0xf1, 0xd9, 0xfa, 0xf3, 0x6f,
++      0x54, 0xb6, 0x28, 0x28, 0xb5, 0xac, 0x9d, 0x66, 0xfe, 0xbe, 0xb7, 0x30,
++      0xbe, 0x1b, 0x94, 0x9c, 0x5d, 0xed, 0x74, 0x53, 0xdf, 0xc1, 0xa8, 0xba,
++      0x8c, 0xe7, 0x7a, 0x3c, 0x8a, 0xb9, 0xc5, 0xe7, 0x9f, 0x5f, 0x5b, 0x23,
++      0xf3, 0xe1, 0x3f, 0x7b, 0x4e, 0x7b, 0xb4, 0xfb, 0xbb, 0x8d, 0xe7, 0x32,
++      0x16, 0xb1, 0x45, 0xb1, 0x01, 0x2f, 0xed, 0xe5, 0xf2, 0xfc, 0x3d, 0xc4,
++      0xd5, 0xc8, 0x46, 0xb4, 0x34, 0x3c, 0x6a, 0xf7, 0x51, 0x94, 0x14, 0xbf,
++      0x51, 0xf0, 0xce, 0x15, 0x0a, 0x8e, 0x86, 0x0c, 0xda, 0xcc, 0x10, 0x71,
++      0x01, 0x28, 0x4e, 0xc2, 0xed, 0x89, 0x44, 0x90, 0xe8, 0x83, 0xbb, 0x24,
++      0x12, 0xc6, 0xfc, 0xbe, 0xda, 0xf6, 0x53, 0xd0, 0x83, 0x7d, 0x8a, 0xde,
++      0x02, 0xd4, 0x99, 0x63, 0xd4, 0xe3, 0x25, 0x8a, 0xee, 0x2f, 0x52, 0xe0,
++      0x56, 0x58, 0x2e, 0x90, 0x1e, 0xc2, 0x96, 0x8c, 0xfc, 0x0e, 0xc3, 0x48,
++      0xff, 0xb6, 0xd0, 0x17, 0xed, 0x7e, 0x23, 0xed, 0xfe, 0x14, 0xc7, 0xae,
++      0xfb, 0x89, 0xaf, 0x6e, 0x57, 0xa4, 0x1d, 0x7b, 0x13, 0x70, 0x17, 0x45,
++      0x36, 0xe0, 0xa9, 0x44, 0xf5, 0xf4, 0x42, 0x39, 0x85, 0xe5, 0xfc, 0xe9,
++      0xa9, 0xb2, 0xbc, 0x66, 0x45, 0xbd, 0x39, 0x59, 0x4a, 0x93, 0x43, 0xd8,
++      0x9e, 0x92, 0xba, 0x11, 0xbb, 0xae, 0x93, 0x7d, 0xf4, 0x24, 0x6a, 0x9b,
++      0xaf, 0x55, 0xf4, 0xf0, 0x23, 0xa8, 0x8b, 0xbe, 0xcd, 0x39, 0xec, 0x82,
++      0x7e, 0xa6, 0x1d, 0x39, 0x59, 0xe6, 0xa5, 0x73, 0x72, 0x2c, 0x4e, 0x43,
++      0xb9, 0x29, 0x05, 0x8f, 0xcf, 0x98, 0x96, 0xf7, 0x65, 0x28, 0xd7, 0x71,
++      0xfe, 0x54, 0xc3, 0x8f, 0xeb, 0x68, 0x43, 0x1b, 0x76, 0x5a, 0xe8, 0x0e,
++      0x55, 0xd3, 0x57, 0x5b, 0x50, 0x41, 0xbf, 0xbc, 0x53, 0x43, 0xb4, 0x32,
++      0x12, 0x56, 0xae, 0xcf, 0x0c, 0xe7, 0xf5, 0x7f, 0xb4, 0x9a, 0xf2, 0x29,
++      0x4d, 0xa9, 0x0b, 0xaf, 0x57, 0xe6, 0xe3, 0xde, 0x85, 0xd7, 0x3d, 0x45,
++      0x1f, 0x5f, 0xbe, 0x4e, 0x1b, 0x81, 0xc2, 0x78, 0x53, 0x42, 0xfd, 0xea,
++      0x26, 0xab, 0x05, 0x5d, 0xf6, 0x35, 0x07, 0x86, 0x9c, 0x51, 0x9f, 0x03,
++      0x1f, 0x58, 0xd1, 0x55, 0x72, 0xad, 0x14, 0xb1, 0x96, 0x3a, 0x9f, 0x13,
++      0x75, 0xe1, 0x4d, 0xf4, 0xb7, 0xc9, 0x55, 0x8d, 0xbc, 0x17, 0x30, 0x8f,
++      0xa1, 0xd6, 0xbf, 0x09, 0xf2, 0xfb, 0x7d, 0xda, 0x48, 0xa3, 0xd4, 0x65,
++      0x19, 0xb1, 0x39, 0x5d, 0x3b, 0x06, 0x2f, 0x36, 0xd1, 0xfe, 0x8a, 0x23,
++      0xba, 0xb9, 0xcc, 0xe1, 0xc4, 0x7e, 0xe2, 0xb8, 0xc3, 0xe8, 0x45, 0x31,
++      0xc7, 0xc8, 0xf8, 0x8a, 0x47, 0x12, 0xc0, 0xb3, 0xfd, 0x16, 0x1a, 0x43,
++      0x1e, 0x2c, 0xb1, 0x6d, 0xf3, 0x90, 0x72, 0x75, 0xea, 0x43, 0x6b, 0xc8,
++      0x59, 0x12, 0x55, 0x23, 0x01, 0xdf, 0x49, 0xb2, 0x81, 0xa2, 0x48, 0x9d,
++      0xe6, 0x44, 0x5c, 0x69, 0xce, 0xf4, 0x28, 0xcb, 0x33, 0xbd, 0xca, 0x92,
++      0x8c, 0xb4, 0x7d, 0x48, 0x59, 0x9a, 0xf1, 0x20, 0xdd, 0xaf, 0x60, 0x7b,
++      0x88, 0x72, 0xd5, 0xe4, 0xec, 0x38, 0xd3, 0xaf, 0x12, 0x63, 0xdf, 0x21,
++      0xc6, 0xea, 0x61, 0xb0, 0xef, 0x27, 0x12, 0xd5, 0x38, 0x44, 0x2c, 0xfd,
++      0x71, 0x5a, 0x57, 0x51, 0x7a, 0x11, 0x5e, 0x19, 0xa9, 0xc0, 0xd8, 0xa0,
++      0xc9, 0xdf, 0xf5, 0x78, 0x61, 0xc4, 0xb2, 0x7a, 0x4c, 0xcb, 0xda, 0x6b,
++      0x1e, 0x52, 0x1a, 0xd9, 0x67, 0xd4, 0x19, 0x8f, 0x16, 0x47, 0x02, 0xe6,
++      0x16, 0xf6, 0xe9, 0x88, 0xc4, 0x95, 0x28, 0xfb, 0xbb, 0x9a, 0xfd, 0x2d,
++      0xcd, 0xf7, 0x97, 0xeb, 0x57, 0x64, 0x91, 0x7a, 0x85, 0x3a, 0x61, 0xd6,
++      0x01, 0xf6, 0x25, 0x02, 0xc1, 0x42, 0xbd, 0xa5, 0xac, 0x73, 0xf5, 0xd9,
++      0x3a, 0xc0, 0x70, 0x22, 0xc8, 0x39, 0x15, 0x5b, 0xf7, 0x33, 0x76, 0x7d,
++      0x83, 0x18, 0xdb, 0x80, 0xb6, 0x61, 0xc1, 0xdf, 0x6b, 0xd4, 0xdc, 0x3c,
++      0xe5, 0xb0, 0x56, 0x62, 0x5e, 0x0e, 0x6f, 0x83, 0xe8, 0xa3, 0x5f, 0x77,
++      0xa5, 0xc4, 0xc6, 0xef, 0xf9, 0x72, 0x22, 0xa0, 0xe0, 0xb1, 0x40, 0xb6,
++      0xa5, 0x1c, 0x95, 0x68, 0x0f, 0x89, 0x6d, 0x6e, 0xfc, 0xf2, 0x53, 0x86,
++      0x1e, 0x5e, 0xa1, 0x70, 0xce, 0x02, 0x7a, 0xf3, 0x52, 0x05, 0x08, 0x8c,
++      0x01, 0x6f, 0xa4, 0x2b, 0xb1, 0xda, 0x74, 0x40, 0xad, 0x0a, 0xa2, 0x37,
++      0x33, 0x35, 0x2e, 0x98, 0xc4, 0x78, 0x69, 0x2f, 0x48, 0xbf, 0x2e, 0xc3,
++      0x32, 0x2d, 0x67, 0xd3, 0x6e, 0xb6, 0xed, 0x0e, 0x64, 0x83, 0x2a, 0xe3,
++      0xdd, 0x7e, 0x5e, 0x38, 0x46, 0xfc, 0x6f, 0x34, 0x5c, 0xc4, 0xff, 0x4a,
++      0x34, 0x9a, 0xbf, 0xb3, 0x96, 0xad, 0x92, 0x7b, 0x85, 0x76, 0xe0, 0x2e,
++      0x66, 0xbf, 0x6f, 0x19, 0xba, 0x7f, 0x94, 0x27, 0xd9, 0x74, 0xee, 0x7a,
++      0x9c, 0x31, 0xab, 0x9b, 0xed, 0x6e, 0x66, 0xbb, 0xeb, 0x34, 0x3d, 0x1a,
++      0x3f, 0x5b, 0x2e, 0x1b, 0x74, 0x40, 0xd7, 0xa4, 0x6c, 0x13, 0xdb, 0x5d,
++      0xcd, 0x76, 0x7b, 0x35, 0x91, 0xef, 0x77, 0xd6, 0xba, 0x55, 0x72, 0x2f,
++      0x67, 0x1f, 0xb9, 0x76, 0xef, 0x91, 0x76, 0xcd, 0xd1, 0x7c, 0x5f, 0x47,
++      0x13, 0xe8, 0x77, 0x44, 0x18, 0x63, 0x1b, 0x02, 0xfe, 0x2e, 0xc6, 0xdb,
++      0x26, 0xc6, 0x8e, 0x9c, 0x4d, 0x4c, 0x8d, 0x77, 0x88, 0x9f, 0x2b, 0x23,
++      0xd7, 0xa4, 0x9c, 0xd8, 0xda, 0x24, 0xf5, 0x2c, 0xf1, 0xc5, 0x47, 0xfd,
++      0x0a, 0xb6, 0x38, 0x71, 0x20, 0x41, 0xfc, 0xc7, 0x37, 0x68, 0x77, 0x7e,
++      0xb4, 0x64, 0x6a, 0xb1, 0x66, 0x27, 0xe3, 0xa0, 0x59, 0x45, 0x5b, 0xcf,
++      0xd9, 0xdb, 0x32, 0xb6, 0x3d, 0x69, 0xb7, 0x1d, 0x57, 0x5a, 0x32, 0x75,
++      0x5a, 0x15, 0x63, 0xee, 0x91, 0xb3, 0xd8, 0x39, 0x27, 0x5a, 0x1a, 0x09,
++      0x34, 0xaf, 0xe7, 0x24, 0xb9, 0x19, 0xdf, 0xbe, 0x37, 0xaf, 0x87, 0x76,
++      0xd1, 0x4b, 0x3b, 0xcc, 0xcd, 0x6f, 0x73, 0x66, 0x8f, 0x2a, 0x18, 0x07,
++      0xb5, 0x16, 0xeb, 0x76, 0xca, 0x7f, 0x72, 0x95, 0x86, 0xc7, 0x78, 0xad,
++      0x16, 0xab, 0x87, 0xbf, 0x47, 0x3b, 0xd3, 0x7d, 0x62, 0x87, 0x5d, 0x67,
++      0xe5, 0x12, 0x99, 0x44, 0x36, 0x91, 0xa9, 0x8f, 0xe5, 0x66, 0x51, 0x3f,
++      0x82, 0x8d, 0xd5, 0x94, 0x67, 0x2b, 0xf9, 0xd0, 0x21, 0xe5, 0xf3, 0x94,
++      0x27, 0xeb, 0xf2, 0xe2, 0xa1, 0x94, 0xc8, 0xa3, 0x44, 0x67, 0x46, 0x66,
++      0xe1, 0x4c, 0x2a, 0x10, 0x7f, 0x02, 0x22, 0x5b, 0x8f, 0xd2, 0x2a, 0xf5,
++      0x53, 0xbd, 0xbc, 0x57, 0x90, 0x11, 0x5a, 0xa5, 0x2d, 0x5b, 0x4e, 0xa6,
++      0xeb, 0x39, 0xd7, 0x2e, 0xe3, 0x6f, 0xcb, 0x51, 0xe1, 0xa4, 0xad, 0x49,
++      0xdb, 0xff, 0x61, 0x45, 0xb5, 0x6e, 0x5e, 0xf3, 0x72, 0x9e, 0xdc, 0xe4,
++      0x05, 0x7a, 0xf0, 0x3a, 0x87, 0xd2, 0xe2, 0x91, 0x78, 0x4d, 0xfb, 0x4c,
++      0xa7, 0x9d, 0x38, 0x9e, 0x58, 0xba, 0xb4, 0xcc, 0xf8, 0x34, 0x1e, 0x1b,
++      0xf1, 0x61, 0x84, 0x73, 0xfb, 0x6c, 0x42, 0xe2, 0xeb, 0x2c, 0x3c, 0x9a,
++      0xf6, 0xe0, 0x99, 0x84, 0x1f, 0x8f, 0x30, 0xfe, 0x4c, 0x24, 0x0c, 0xec,
++      0x4f, 0x7b, 0xf1, 0x34, 0xed, 0x79, 0x34, 0xed, 0xa3, 0xbd, 0xd4, 0x63,
++      0x38, 0xdd, 0x66, 0x8f, 0xe1, 0xc9, 0xc4, 0xbf, 0xcb, 0x58, 0x83, 0x32,
++      0xd6, 0xcd, 0xf6, 0x58, 0x0b, 0x71, 0x7e, 0xd6, 0xd9, 0x79, 0x38, 0x91,
++      0xb0, 0x71, 0xa0, 0x77, 0x99, 0x43, 0xe6, 0x81, 0x36, 0x3b, 0x20, 0x58,
++      0xa0, 0xf7, 0xc7, 0x61, 0x61, 0x8f, 0x39, 0x93, 0xfe, 0xdf, 0x4b, 0x79,
++      0xa9, 0x53, 0x8e, 0x1f, 0xae, 0x8a, 0x68, 0x79, 0x24, 0x10, 0xeb, 0xa3,
++      0xde, 0x9d, 0x11, 0xd1, 0x43, 0x4e, 0xef, 0x2b, 0x32, 0x87, 0x14, 0xe1,
++      0x7a, 0x97, 0x0c, 0xc4, 0xad, 0x32, 0x43, 0xf4, 0x1d, 0x20, 0xce, 0x02,
++      0xf3, 0xf7, 0x38, 0x39, 0xbe, 0x9b, 0x38, 0x66, 0x13, 0x45, 0x46, 0x9d,
++      0x56, 0x4d, 0xd9, 0x8f, 0x7c, 0x24, 0x06, 0x8a, 0x8e, 0xfe, 0x36, 0x3f,
++      0x5f, 0xba, 0x83, 0xf2, 0xfa, 0x81, 0xc2, 0xbc, 0x58, 0xd6, 0x0e, 0xb3,
++      0x30, 0x37, 0x35, 0xf0, 0x57, 0xeb, 0xf1, 0x21, 0x5a, 0xc4, 0x48, 0x62,
++      0x1a, 0xe2, 0x9a, 0x9a, 0x6f, 0x3b, 0xaa, 0x14, 0x31, 0xff, 0xc0, 0xb8,
++      0xf8, 0x7e, 0x39, 0xa2, 0x4e, 0xa9, 0x8f, 0x68, 0x51, 0x24, 0x10, 0x9c,
++      0xab, 0x4e, 0xb5, 0x19, 0xc1, 0x01, 0xe9, 0x2b, 0x4e, 0x59, 0xcf, 0xc7,
++      0x82, 0x91, 0x44, 0x01, 0x37, 0xfe, 0x3b, 0xf5, 0x2e, 0xd4, 0xa9, 0xc8,
++      0x29, 0x7a, 0x55, 0x71, 0x74, 0x50, 0xf4, 0xe7, 0xc4, 0x4a, 0x73, 0x7a,
++      0x5e, 0xe6, 0x59, 0x9c, 0x17, 0x62, 0x0e, 0xe7, 0xeb, 0x85, 0x7e, 0x2f,
++      0xe5, 0xb6, 0x90, 0x0e, 0x5d, 0x8c, 0x4d, 0x36, 0xe7, 0x5c, 0x95, 0xcf,
++      0x5b, 0x38, 0x4f, 0xea, 0x76, 0xea, 0xfa, 0xb3, 0x8e, 0xdc, 0x79, 0x9d,
++      0xef, 0xa3, 0xfa, 0xd2, 0xb5, 0x18, 0x0a, 0x3a, 0x03, 0x86, 0xd2, 0x88,
++      0xb9, 0x23, 0xf5, 0x4d, 0xce, 0xbe, 0xb6, 0x0d, 0xf4, 0xef, 0x7b, 0x4f,
++      0x35, 0x7c, 0x16, 0x9b, 0xa9, 0x17, 0xa7, 0x6d, 0x67, 0x51, 0xc5, 0x65,
++      0x2c, 0xb1, 0xfd, 0x49, 0x1d, 0x5f, 0x91, 0xef, 0x23, 0x6a, 0xe7, 0x2c,
++      0x50, 0x5b, 0xf2, 0xe7, 0x77, 0x53, 0xdf, 0x32, 0x0e, 0x15, 0x3f, 0x20,
++      0x97, 0x7d, 0x27, 0xf4, 0x59, 0x64, 0x6d, 0xcc, 0x76, 0xd2, 0xdf, 0xaf,
++      0x62, 0x5d, 0xe2, 0xdf, 0xb8, 0xc4, 0x52, 0xc4, 0x4b, 0xe8, 0xd7, 0x45,
++      0xf4, 0xd5, 0x6b, 0x32, 0xf7, 0xa0, 0x3d, 0x15, 0x08, 0x97, 0x28, 0xf7,
++      0xe0, 0xd6, 0x8c, 0x0b, 0xb1, 0x61, 0x0f, 0xd6, 0x51, 0x27, 0xce, 0xa4,
++      0xf8, 0xb9, 0x86, 0x75, 0xa3, 0x47, 0x67, 0x3a, 0xe9, 0x37, 0xeb, 0x46,
++      0xbd, 0x3c, 0xa6, 0xf3, 0x70, 0x63, 0x35, 0x8f, 0x3d, 0xb4, 0xcb, 0x36,
++      0xc6, 0x86, 0x23, 0x09, 0x13, 0x9d, 0xd4, 0xd5, 0x13, 0x89, 0x06, 0xdc,
++      0x4b, 0xbd, 0x1d, 0x4a, 0x7c, 0x8a, 0x3a, 0x0a, 0xa3, 0x83, 0x73, 0xfc,
++      0x58, 0x42, 0xb5, 0xf3, 0xab, 0xdb, 0x33, 0xff, 0x62, 0x45, 0xa7, 0x8b,
++      0x9c, 0xa2, 0x0b, 0x99, 0xcf, 0x8f, 0xe8, 0x81, 0xfe, 0x3b, 0x55, 0x17,
++      0xf5, 0xd8, 0xb6, 0xcb, 0xc0, 0xf6, 0x5d, 0x75, 0xb4, 0xbb, 0x8c, 0xe5,
++      0xaf, 0x1a, 0xa0, 0x0e, 0xa6, 0xea, 0xe1, 0x08, 0x79, 0x81, 0xe8, 0x41,
++      0xda, 0xbc, 0x8f, 0x63, 0xee, 0xe6, 0x3d, 0x1f, 0x1e, 0x4f, 0x7c, 0x97,
++      0xbf, 0xc3, 0xca, 0x5d, 0x19, 0xf1, 0x79, 0xf1, 0xb7, 0x7f, 0x70, 0xe4,
++      0x62, 0x6f, 0xa1, 0xdc, 0x16, 0x96, 0xb3, 0xac, 0xcd, 0x67, 0xe3, 0x4a,
++      0x51, 0xb4, 0x84, 0x71, 0x65, 0x7f, 0x22, 0x10, 0x7e, 0xc6, 0x8e, 0x7d,
++      0x4e, 0xda, 0x8e, 0xd8, 0x47, 0x8f, 0x6d, 0x1b, 0xcb, 0xce, 0xda, 0xc6,
++      0xe4, 0x59, 0x0e, 0xd5, 0x9f, 0x9a, 0xea, 0x73, 0x39, 0xbb, 0x70, 0x26,
++      0xf5, 0x5e, 0xdb, 0x8e, 0xd3, 0x82, 0x8f, 0x0e, 0x38, 0x06, 0x9c, 0x68,
++      0x33, 0x2f, 0xa5, 0xbe, 0xab, 0x19, 0x6f, 0x8a, 0x78, 0x30, 0x4f, 0x1d,
++      0xfe, 0x0b, 0x94, 0x0e, 0x64, 0xad, 0x12, 0xfe, 0x6e, 0x0e, 0x89, 0xbe,
++      0xaf, 0xc2, 0xad, 0xc3, 0x0e, 0x14, 0x0d, 0x28, 0x78, 0xd2, 0xac, 0xc7,
++      0x90, 0x37, 0x87, 0xbb, 0x6a, 0xf2, 0x52, 0x7b, 0x9e, 0x2e, 0x1e, 0x3f,
++      0xfa, 0x8c, 0xc4, 0x85, 0x7b, 0x47, 0x3d, 0xf0, 0x25, 0x15, 0x78, 0x88,
++      0x2b, 0x65, 0x46, 0x3d, 0xf5, 0xaa, 0xa1, 0x32, 0x69, 0xe2, 0x6b, 0x19,
++      0xd2, 0xa6, 0x07, 0xc2, 0xb8, 0x93, 0xf3, 0x52, 0xfe, 0xc0, 0x95, 0xb8,
++      0x83, 0xe5, 0x36, 0xf0, 0xde, 0x86, 0xd1, 0x6a, 0x1e, 0x5e, 0x1e, 0xd3,
++      0x79, 0x34, 0xe0, 0xf6, 0xe1, 0x5a, 0x44, 0xab, 0xf5, 0xa0, 0x5f, 0x75,
++      0xa0, 0x7a, 0x40, 0xf4, 0xae, 0x62, 0xe5, 0x02, 0x05, 0xe6, 0xa7, 0x8b,
++      0xa1, 0xce, 0xfd, 0x38, 0xdf, 0xfd, 0x53, 0xb2, 0xbe, 0x6c, 0x0d, 0xd9,
++      0x98, 0x2e, 0x3a, 0x16, 0x3b, 0xf9, 0x57, 0xce, 0x85, 0xc8, 0x2b, 0x7d,
++      0x48, 0xac, 0x15, 0x1d, 0x7f, 0x12, 0x36, 0x30, 0xb2, 0x54, 0x74, 0xb1,
++      0xcc, 0x47, 0x7d, 0x01, 0x67, 0xe7, 0x7f, 0x2a, 0x67, 0x95, 0xb8, 0xaf,
++      0x87, 0x87, 0x6c, 0x8e, 0xe3, 0x67, 0xbe, 0xa8, 0xc7, 0x45, 0xe7, 0xe4,
++      0x34, 0x6e, 0xd5, 0x80, 0xbf, 0xc8, 0xb8, 0x19, 0xb7, 0x71, 0x9e, 0xf6,
++      0x26, 0xd4, 0xa5, 0x2e, 0xa8, 0xb3, 0x5c, 0x4c, 0x9c, 0x47, 0x4c, 0x1d,
++      0xed, 0xc3, 0xcc, 0xb5, 0x86, 0xcb, 0xd1, 0xa5, 0x29, 0xee, 0x6d, 0xf5,
++      0x8b, 0x24, 0xa7, 0xf6, 0x57, 0x1a, 0x50, 0xcb, 0x18, 0xff, 0xb7, 0x6b,
++      0x70, 0x16, 0x19, 0x8a, 0x9a, 0xa8, 0x6f, 0x42, 0xbc, 0x0a, 0xce, 0x0a,
++      0x03, 0x0a, 0x73, 0x66, 0xf4, 0x69, 0x10, 0xec, 0x89, 0x16, 0x19, 0xf7,
++      0xe0, 0xb6, 0x14, 0xac, 0xd2, 0x08, 0xf3, 0xa1, 0x88, 0x41, 0x8e, 0x1b,
++      0xf0, 0x15, 0xd1, 0x3f, 0x56, 0x93, 0x57, 0xac, 0x1d, 0x16, 0x39, 0x3c,
++      0xe4, 0x1b, 0x86, 0xbf, 0x0d, 0xcc, 0xe1, 0x5b, 0xf4, 0xe0, 0x24, 0xf3,
++      0xd8, 0xd5, 0xd4, 0xfd, 0x48, 0xe2, 0x1e, 0x34, 0xa6, 0x8e, 0x58, 0x1e,
++      0xf2, 0xc8, 0x22, 0xa3, 0xf6, 0x4c, 0x17, 0x62, 0xf4, 0x0d, 0xe1, 0x47,
++      0x6b, 0xe8, 0x1b, 0x3e, 0x64, 0x12, 0xea, 0x71, 0xb2, 0x0b, 0x74, 0x8c,
++      0xae, 0xc7, 0xd7, 0x46, 0x67, 0x61, 0x3c, 0xb1, 0x01, 0x77, 0x66, 0xc8,
++      0x95, 0xfa, 0xaf, 0xc2, 0x1d, 0xc3, 0x57, 0xe1, 0xf6, 0x9d, 0x46, 0x70,
++      0x03, 0x75, 0xbd, 0x76, 0x98, 0x81, 0x72, 0xba, 0xb4, 0x5b, 0xd0, 0x95,
++      0xf0, 0x45, 0xea, 0x22, 0xaf, 0xa7, 0x2c, 0x0a, 0x1c, 0xe6, 0x5f, 0x2d,
++      0x5e, 0x8a, 0x17, 0x35, 0x28, 0xfe, 0xdd, 0xf5, 0x2f, 0x31, 0xb7, 0x17,
++      0xd9, 0x11, 0x9d, 0x69, 0xfc, 0xc0, 0x7a, 0x50, 0xa3, 0x7f, 0x47, 0x10,
++      0x9f, 0xd3, 0xf0, 0xbc, 0xf5, 0xd0, 0x2a, 0xb9, 0x7e, 0x9b, 0x13, 0xa5,
++      0x2a, 0xaf, 0x49, 0x9b, 0x82, 0x4b, 0x75, 0x44, 0xe2, 0x8f, 0x6b, 0x33,
++      0x6b, 0x25, 0xcf, 0x96, 0x27, 0x2f, 0x24, 0x16, 0x3f, 0x91, 0xf0, 0xa2,
++      0x37, 0x95, 0xe3, 0x56, 0x37, 0x65, 0x84, 0x53, 0xb9, 0x51, 0xda, 0x27,
++      0x71, 0x25, 0x8a, 0xf5, 0xfc, 0x5d, 0xd2, 0xa7, 0xb7, 0xc4, 0x91, 0x60,
++      0x9b, 0x4d, 0x9c, 0x0b, 0xda, 0x6b, 0x9f, 0x03, 0x25, 0x46, 0x73, 0xce,
++      0x56, 0xfb, 0x56, 0xd0, 0x56, 0x35, 0x54, 0xf4, 0xf5, 0x70, 0xac, 0xb4,
++      0x55, 0xd6, 0xbb, 0x83, 0xba, 0xf0, 0xf4, 0xad, 0xa2, 0xbd, 0xce, 0x42,
++      0x59, 0x5f, 0x2b, 0xf1, 0x01, 0x8c, 0xeb, 0x16, 0x8e, 0x9a, 0x95, 0x79,
++      0x7e, 0xda, 0x8c, 0x5b, 0x53, 0x51, 0xb4, 0xa5, 0x6a, 0xa3, 0x27, 0x65,
++      0xad, 0xca, 0x95, 0xc3, 0xb0, 0x68, 0x8d, 0xe8, 0x62, 0x32, 0x8f, 0xa7,
++      0x7a, 0x73, 0x8e, 0xd3, 0xe9, 0x9a, 0x5f, 0x29, 0xc8, 0xde, 0x83, 0x18,
++      0xf3, 0x8f, 0x39, 0x91, 0x16, 0x58, 0x29, 0x91, 0x3b, 0x6e, 0xf9, 0x98,
++      0x53, 0x7a, 0x22, 0xfa, 0xc6, 0xc5, 0x0e, 0xa3, 0xe3, 0x15, 0x25, 0x88,
++      0xeb, 0x29, 0x43, 0x59, 0x5f, 0x27, 0x5e, 0x08, 0xe9, 0xbe, 0xef, 0x2a,
++      0xfa, 0x99, 0x0d, 0x78, 0x05, 0x3f, 0xe3, 0xb5, 0xa2, 0xbe, 0x09, 0x3c,
++      0x94, 0x79, 0x15, 0xa7, 0x28, 0xab, 0xda, 0xf7, 0xa1, 0xb5, 0xcc, 0x78,
++      0x86, 0xe3, 0x77, 0x2b, 0x6f, 0x65, 0xa6, 0xda, 0xe2, 0x55, 0x58, 0xbd,
++      0x53, 0xec, 0x4f, 0x0f, 0xc6, 0x89, 0xbd, 0x6d, 0x66, 0x85, 0x70, 0x79,
++      0x89, 0x4f, 0x94, 0xbf, 0x45, 0xb0, 0x85, 0xfe, 0x41, 0x3b, 0xb0, 0xc7,
++      0xd0, 0x6a, 0x63, 0xb2, 0x33, 0x09, 0x1b, 0x4b, 0x73, 0x7a, 0x8e, 0x28,
++      0x6d, 0xa3, 0xbe, 0x52, 0x94, 0xfa, 0xf2, 0x7e, 0x90, 0x5b, 0xb3, 0x38,
++      0x57, 0xf7, 0x3f, 0xad, 0x11, 0xef, 0xf9, 0x75, 0x2b, 0x98, 0x83, 0x55,
++      0x72, 0x3c, 0xef, 0xf6, 0xc5, 0xad, 0xd2, 0xdc, 0x58, 0x9a, 0x7f, 0xa0,
++      0x88, 0x4d, 0x06, 0xc9, 0xed, 0x3b, 0x71, 0x69, 0x48, 0x6f, 0xfd, 0xae,
++      0x22, 0x65, 0xf5, 0xf0, 0x06, 0xa5, 0xd0, 0xcf, 0xcb, 0x38, 0x39, 0x22,
++      0x7d, 0x48, 0x5f, 0x13, 0xcc, 0xc9, 0x72, 0x63, 0x10, 0x5f, 0x7a, 0xc4,
++      0x9e, 0x4b, 0xf1, 0x27, 0x3f, 0x96, 0x73, 0x4c, 0xae, 0x3e, 0x1f, 0x0f,
++      0x17, 0xed, 0xd5, 0x87, 0xb5, 0x99, 0x15, 0x58, 0xcd, 0xbc, 0x76, 0x75,
++      0xa6, 0x85, 0xba, 0xdf, 0x48, 0x7c, 0x67, 0x46, 0xa0, 0xe5, 0x74, 0x7c,
++      0xce, 0x3e, 0x74, 0xff, 0x24, 0x56, 0xf0, 0xfe, 0xcf, 0x9d, 0xa8, 0x68,
++      0x61, 0x79, 0xfb, 0xbe, 0x29, 0xf8, 0x7d, 0xae, 0xcc, 0x47, 0x78, 0x98,
++      0x1d, 0xe7, 0xf7, 0xda, 0x1c, 0xb1, 0xc5, 0xce, 0xbd, 0xae, 0xb6, 0xe7,
++      0x5c, 0x38, 0x82, 0x85, 0x63, 0x66, 0x31, 0xf3, 0xaf, 0xba, 0xe0, 0xf9,
++      0x9c, 0x50, 0x67, 0x16, 0x5a, 0xc0, 0x03, 0xe9, 0x4b, 0xf4, 0x72, 0xa2,
++      0x26, 0xa7, 0x97, 0x4f, 0x2a, 0x7b, 0x3e, 0x76, 0xec, 0x49, 0x48, 0xdf,
++      0x45, 0x36, 0x2f, 0x6d, 0xcc, 0x94, 0x22, 0xee, 0x15, 0x1d, 0x49, 0x7b,
++      0xba, 0x5f, 0x64, 0x5a, 0xbb, 0x53, 0xec, 0xd8, 0xc2, 0x08, 0x65, 0xe8,
++      0xb6, 0xe7, 0x2d, 0xc7, 0x25, 0x8f, 0x9c, 0x17, 0x9f, 0x65, 0x4c, 0x85,
++      0xbe, 0x6f, 0x73, 0xe5, 0xf8, 0x66, 0x81, 0x2b, 0x58, 0xd6, 0x80, 0x59,
++      0xe0, 0x0a, 0x32, 0xe6, 0xbf, 0x00, 0x63, 0x9d, 0x3d, 0xde, 0x35, 0xf9,
++      0xb6, 0xbb, 0xcc, 0x00, 0xed, 0x5a, 0xb8, 0x54, 0x44, 0x59, 0xb3, 0x2b,
++      0xc3, 0xb9, 0x95, 0xdc, 0x06, 0xb8, 0x93, 0xf7, 0xcb, 0x79, 0xff, 0xc5,
++      0x90, 0x0b, 0x97, 0x4e, 0x97, 0xbe, 0xaf, 0x42, 0xc7, 0xce, 0x28, 0x2a,
++      0x17, 0x06, 0x30, 0x69, 0x73, 0x89, 0x02, 0xef, 0x75, 0xe1, 0x8e, 0x9d,
++      0x1f, 0x5a, 0x15, 0x36, 0x17, 0x33, 0x62, 0xe3, 0x8a, 0x8a, 0xed, 0x8b,
++      0x84, 0xff, 0xba, 0x88, 0xef, 0xe4, 0xa2, 0xc2, 0xad, 0x5d, 0x65, 0xe4,
++      0xb0, 0xc2, 0xe1, 0x02, 0xd9, 0x9b, 0x54, 0x68, 0x5a, 0x44, 0xb8, 0xdc,
++      0x2c, 0x9b, 0xc3, 0x0a, 0x97, 0xfd, 0x56, 0xea, 0xd0, 0x14, 0x2e, 0x7b,
++      0x96, 0x73, 0x30, 0xf7, 0x69, 0x61, 0x7e, 0xef, 0x81, 0x3b, 0xa2, 0xb7,
++      0x6c, 0x52, 0x3a, 0xb1, 0x3c, 0x64, 0x98, 0x92, 0x53, 0x5f, 0xa9, 0xe8,
++      0xc1, 0xd3, 0x08, 0x12, 0x6f, 0x5f, 0xc6, 0xc8, 0x60, 0xdc, 0x25, 0x76,
++      0xb4, 0x29, 0x73, 0x4e, 0x9e, 0x5b, 0x29, 0x8f, 0x3b, 0x27, 0x8f, 0x79,
++      0x1a, 0x2a, 0x9e, 0x6c, 0x70, 0x11, 0xb7, 0xfe, 0x0e, 0x6d, 0x3b, 0x55,
++      0x2c, 0xb1, 0xb9, 0xf9, 0xdf, 0x11, 0x7f, 0x2f, 0x2a, 0xcd, 0x95, 0x07,
++      0x3a, 0xe9, 0xdf, 0xef, 0x2f, 0x2c, 0x41, 0x68, 0x9a, 0x82, 0x2a, 0xa3,
++      0x83, 0xf9, 0xf1, 0x87, 0x56, 0xdc, 0x49, 0x3a, 0x6b, 0x40, 0x2b, 0x89,
++      0x44, 0x29, 0x5b, 0x93, 0x72, 0xcd, 0xf0, 0x20, 0xfb, 0xe9, 0x20, 0xef,
++      0xf7, 0xe0, 0x2e, 0xda, 0xce, 0x5d, 0x8c, 0x65, 0x77, 0x31, 0x96, 0xdd,
++      0x35, 0xfa, 0x2f, 0xbc, 0x3e, 0xdd, 0xfe, 0xbd, 0x29, 0x55, 0xb0, 0x65,
++      0x27, 0xe3, 0x82, 0xe8, 0x77, 0x33, 0x7d, 0x47, 0xe2, 0x02, 0x28, 0x93,
++      0x85, 0x93, 0x9c, 0xc7, 0x25, 0x9a, 0x1e, 0xcc, 0xe2, 0xeb, 0xae, 0x73,
++      0x79, 0x5f, 0x21, 0xb6, 0xc8, 0x3c, 0xba, 0x70, 0x1b, 0x65, 0x0c, 0x86,
++      0xfe, 0xcb, 0x42, 0x95, 0xf8, 0xee, 0x85, 0xf7, 0x73, 0xf3, 0x7a, 0xe4,
++      0x2c, 0x07, 0x54, 0xc4, 0x4e, 0xe9, 0xf3, 0x7b, 0x6c, 0x4e, 0xf1, 0xa2,
++      0xc9, 0xdc, 0x6d, 0xe7, 0xd1, 0xf9, 0x62, 0x2a, 0x6b, 0x47, 0xa3, 0xe8,
++      0xe6, 0xb8, 0x57, 0x0f, 0x3f, 0x96, 0xd7, 0x4b, 0x61, 0xbc, 0x0a, 0xd5,
++      0xe2, 0xa1, 0xff, 0xe4, 0x72, 0x95, 0xb6, 0x51, 0xe1, 0xb6, 0xd5, 0xfc,
++      0x2f, 0xdc, 0xd6, 0xcb, 0xff, 0xc2, 0x73, 0xa7, 0xf3, 0xbf, 0x13, 0xfe,
++      0xe9, 0x62, 0xc7, 0xf5, 0xe8, 0xdd, 0x65, 0x59, 0xc5, 0x81, 0x7a, 0x6c,
++      0x19, 0xfd, 0x48, 0xbc, 0xbc, 0x40, 0x1e, 0x7b, 0x0e, 0xe8, 0x47, 0x2e,
++      0xc1, 0x22, 0xbf, 0x5f, 0x95, 0xbe, 0x2d, 0x6c, 0x34, 0xaf, 0x62, 0x9f,
++      0x8c, 0x80, 0xd5, 0x53, 0xfd, 0xa2, 0xd0, 0x46, 0x41, 0xdf, 0xc5, 0xf4,
++      0x73, 0x68, 0x2e, 0xea, 0x7b, 0x65, 0x46, 0xea, 0x36, 0x29, 0x4b, 0x87,
++      0xa7, 0x96, 0xef, 0x20, 0x1f, 0x3e, 0x4d, 0x5d, 0x17, 0xfc, 0xc8, 0x9b,
++      0xcf, 0x2b, 0x98, 0x4b, 0xa4, 0x44, 0x97, 0x32, 0xbe, 0x5c, 0xae, 0x28,
++      0xb6, 0x74, 0xe4, 0x6c, 0x1f, 0xa2, 0xb7, 0xf8, 0xf4, 0x12, 0x43, 0xec,
++      0x28, 0x48, 0x5c, 0xd1, 0xc3, 0xcd, 0x84, 0xed, 0x53, 0x09, 0xc4, 0x1c,
++      0x91, 0xe6, 0xa6, 0xb5, 0x89, 0xb9, 0xda, 0xf1, 0x7c, 0x2e, 0xba, 0x87,
++      0x38, 0xae, 0x1a, 0xb2, 0x0e, 0x42, 0x5b, 0x19, 0x16, 0xdd, 0x75, 0x28,
++      0xe7, 0xf2, 0xce, 0x28, 0x79, 0x97, 0x6a, 0xcb, 0xe8, 0x8c, 0x88, 0x6c,
++      0x52, 0x87, 0xb2, 0x5f, 0xc0, 0xbf, 0x72, 0xba, 0xa8, 0x80, 0x67, 0x40,
++      0x78, 0x97, 0x8e, 0x0d, 0x8c, 0xf3, 0x65, 0x03, 0x7e, 0xfa, 0x42, 0x35,
++      0x4a, 0x1f, 0x88, 0x60, 0xfd, 0xa8, 0x86, 0x92, 0x07, 0x2c, 0x6b, 0x6e,
++      0xa8, 0x87, 0x5c, 0xf6, 0xb2, 0x22, 0xc9, 0x9d, 0x9c, 0x49, 0x62, 0x16,
++      0xf1, 0xad, 0x3d, 0xa5, 0xe0, 0x6a, 0xc6, 0xd3, 0x28, 0x71, 0xa8, 0xdd,
++      0xc6, 0x39, 0xab, 0x73, 0x4e, 0xc4, 0x45, 0x1b, 0x5a, 0xc5, 0xfb, 0xad,
++      0xc4, 0xc0, 0x56, 0x62, 0x9a, 0x65, 0xbd, 0x7f, 0x39, 0x3a, 0xcb, 0x22,
++      0x37, 0x13, 0x0b, 0x6b, 0xc9, 0x89, 0x25, 0x7e, 0x5f, 0x8e, 0x35, 0x8c,
++      0xfd, 0xc5, 0x49, 0x3b, 0x9f, 0xa2, 0xee, 0x18, 0xa3, 0x32, 0x8c, 0x71,
++      0x94, 0xfd, 0x69, 0x72, 0x5c, 0xe1, 0xbb, 0x95, 0xc9, 0x0d, 0x8c, 0x75,
++      0x1e, 0x54, 0x0c, 0x5c, 0x86, 0x3b, 0x19, 0xcf, 0xef, 0xd8, 0xe9, 0x47,
++      0x7a, 0xd1, 0x55, 0x94, 0xef, 0x1e, 0xac, 0x4f, 0x19, 0x92, 0x43, 0x45,
++      0x83, 0x8b, 0xc8, 0xb7, 0x33, 0x82, 0x3b, 0x92, 0x8f, 0x95, 0x61, 0x49,
++      0x0b, 0x10, 0x4c, 0x16, 0xf0, 0x2d, 0x2a, 0x6b, 0x47, 0x30, 0x92, 0xe7,
++      0x63, 0xdb, 0x39, 0x5e, 0x24, 0xeb, 0x70, 0x2d, 0x98, 0xcf, 0x58, 0x20,
++      0xf6, 0xa5, 0x31, 0xc7, 0x2c, 0x51, 0x0c, 0xdf, 0x1e, 0xfa, 0xa9, 0xe4,
++      0x3d, 0x57, 0x24, 0x0b, 0xb1, 0x4f, 0xcf, 0x2e, 0x76, 0x74, 0x12, 0x47,
++      0xf4, 0x8d, 0xbf, 0x53, 0xf4, 0xf6, 0x13, 0xca, 0x2b, 0xd8, 0x37, 0xf6,
++      0x2a, 0x86, 0xc6, 0xdc, 0xca, 0xe8, 0x98, 0xf4, 0x35, 0x81, 0xbe, 0xcc,
++      0x9f, 0xea, 0x6b, 0xea, 0xfa, 0xcb, 0xa2, 0xf3, 0xd6, 0x6c, 0xae, 0xce,
++      0xe7, 0x89, 0x4b, 0xcf, 0xe3, 0xc7, 0x32, 0x27, 0x62, 0x97, 0x5e, 0xf4,
++      0xa4, 0xce, 0xad, 0x0b, 0xf4, 0x27, 0xb6, 0xd9, 0xfe, 0xd9, 0x92, 0x11,
++      0x7b, 0x55, 0x19, 0x33, 0x2f, 0xce, 0xe7, 0x2c, 0xb5, 0xd4, 0x41, 0x9f,
++      0x7d, 0x6f, 0x9f, 0xf9, 0x29, 0x64, 0xed, 0x6b, 0x8b, 0xe9, 0x9b, 0xd5,
++      0x28, 0x26, 0x26, 0x06, 0x43, 0x3e, 0x14, 0x57, 0xc9, 0x3a, 0xce, 0xb9,
++      0xdc, 0x7f, 0xc3, 0x4e, 0x86, 0x64, 0x1b, 0x73, 0x1a, 0x89, 0x7f, 0xb5,
++      0x9c, 0xef, 0x1c, 0xce, 0xac, 0xa7, 0x0d, 0x5d, 0x27, 0x36, 0xe4, 0xca,
++      0xd9, 0xd0, 0x47, 0xd7, 0x17, 0x54, 0x90, 0xfb, 0x69, 0x15, 0x76, 0xde,
++      0xd7, 0xa4, 0x5c, 0x9f, 0xb7, 0xab, 0xcf, 0x67, 0x1e, 0x2d, 0xca, 0xe7,
++      0x66, 0x17, 0x94, 0xff, 0x38, 0x1d, 0x5c, 0xf6, 0x67, 0xe8, 0x40, 0xe2,
++      0x81, 0xe4, 0x04, 0xa2, 0x83, 0xf3, 0xf3, 0xf2, 0xfe, 0x44, 0x35, 0x71,
++      0xef, 0x42, 0x5d, 0xcc, 0xcc, 0xeb, 0x62, 0x31, 0xb1, 0x4b, 0xfe, 0x5b,
++      0x38, 0x65, 0x7a, 0xf1, 0xa2, 0x26, 0xe3, 0x5e, 0x8c, 0xf5, 0x1c, 0xaf,
++      0x9b, 0xba, 0x58, 0x1e, 0xaa, 0x44, 0xf0, 0xbc, 0x78, 0x50, 0xcb, 0xd8,
++      0xf1, 0x21, 0x79, 0xa6, 0xfc, 0xf6, 0xe3, 0x05, 0xea, 0xe2, 0x8e, 0xe1,
++      0xc5, 0xb8, 0x8b, 0xfe, 0x94, 0xe3, 0x90, 0xb9, 0xd8, 0xb0, 0x76, 0x58,
++      0xda, 0x14, 0x8c, 0xfb, 0xd9, 0xd9, 0x71, 0xfe, 0x71, 0x5e, 0xfe, 0x0a,
++      0xe5, 0x97, 0x67, 0x07, 0xb2, 0x16, 0x2d, 0xcf, 0x11, 0x64, 0x2c, 0xc6,
++      0x14, 0xdc, 0xb1, 0xac, 0x83, 0xe6, 0x3c, 0xc4, 0xaa, 0xf5, 0x7e, 0x89,
++      0x8f, 0xfd, 0xc4, 0x03, 0x07, 0xf3, 0xc8, 0xa2, 0x48, 0x94, 0xfe, 0xac,
++      0x5e, 0xe5, 0x80, 0x5a, 0xef, 0x40, 0x27, 0xde, 0x30, 0x8d, 0xde, 0x75,
++      0xf8, 0x14, 0xba, 0xbc, 0x16, 0xf6, 0xb2, 0x9d, 0xee, 0x54, 0x09, 0xda,
++      0xeb, 0x69, 0x56, 0x2b, 0x3d, 0xd8, 0x91, 0x8a, 0xb7, 0x12, 0x16, 0x18,
++      0x73, 0x1a, 0xfe, 0x2a, 0x11, 0xd0, 0x5b, 0x36, 0x90, 0xb7, 0x2c, 0xef,
++      0x73, 0xc3, 0xaf, 0xe4, 0x72, 0xb4, 0x01, 0x55, 0xd6, 0x09, 0x23, 0x94,
++      0xbd, 0xc7, 0xce, 0xf7, 0xfc, 0xd3, 0xa5, 0x1f, 0x3f, 0xe2, 0x19, 0xa9,
++      0xeb, 0x47, 0xe9, 0x5c, 0x05, 0xcb, 0xe7, 0xea, 0xf1, 0xa8, 0x62, 0x59,
++      0x0b, 0x42, 0x4e, 0xfb, 0xfe, 0xb6, 0x4c, 0x5d, 0xeb, 0x0d, 0xea, 0xab,
++      0x56, 0x6e, 0x6d, 0x52, 0xd7, 0xa2, 0x4c, 0x0a, 0x8e, 0xfc, 0xd1, 0xf5,
++      0xf9, 0x20, 0xe4, 0xb9, 0x89, 0xdb, 0x58, 0x89, 0xfd, 0xf9, 0xf5, 0x39,
++      0x57, 0xe4, 0xbd, 0x2f, 0xef, 0x35, 0x24, 0x6f, 0x11, 0x9d, 0x4b, 0x7f,
++      0x62, 0x0b, 0xd7, 0x15, 0x0b, 0x06, 0x76, 0x65, 0x16, 0xd2, 0x16, 0x7f,
++      0x6b, 0x8d, 0x7a, 0xa7, 0x96, 0xbd, 0x51, 0xcd, 0xad, 0xb7, 0x4b, 0xd9,
++      0x42, 0xb9, 0x8b, 0x89, 0x09, 0x8d, 0x18, 0x3e, 0xaf, 0x4d, 0xc9, 0x75,
++      0x0b, 0x6d, 0xde, 0xc6, 0x72, 0xd2, 0xae, 0xe0, 0xef, 0x7f, 0x59, 0xfb,
++      0xce, 0x6b, 0xaf, 0xd5, 0x95, 0x6b, 0xef, 0xee, 0x62, 0xc9, 0xdd, 0xfb,
++      0x53, 0x45, 0xac, 0xf3, 0x4e, 0x9e, 0x07, 0x16, 0xca, 0x7c, 0xea, 0x82,
++      0x32, 0xc4, 0x79, 0xe3, 0x4d, 0x6b, 0xcf, 0x79, 0x65, 0x96, 0x3b, 0xcf,
++      0x2f, 0xe3, 0xc4, 0x1c, 0xe3, 0x55, 0xeb, 0xc8, 0x79, 0x65, 0xd2, 0x17,
++      0x94, 0xb9, 0x1c, 0x63, 0xf5, 0x8f, 0x58, 0x43, 0xb9, 0xb9, 0xc9, 0xd2,
++      0x7d, 0xdc, 0x33, 0x23, 0xad, 0x7f, 0x75, 0xc5, 0x3c, 0xbd, 0x63, 0xa6,
++      0x43, 0x9e, 0xd9, 0xb8, 0x91, 0xcd, 0xcd, 0x4d, 0x5c, 0xe6, 0xc6, 0xb5,
++      0xa0, 0x30, 0x37, 0xd7, 0xe5, 0xeb, 0x17, 0xda, 0xbd, 0xae, 0xe8, 0xfc,
++      0x76, 0x0b, 0xd7, 0xaf, 0xb8, 0x40, 0xee, 0xef, 0x5c, 0x50, 0xee, 0xb7,
++      0x7f, 0xa4, 0xde, 0x2f, 0x1c, 0xe7, 0x5f, 0x3f, 0xa0, 0x9e, 0x7f, 0xde,
++      0x9c, 0x3f, 0x2f, 0xe8, 0xbf, 0xea, 0x82, 0xf2, 0x35, 0x17, 0x94, 0x7f,
++      0x59, 0xfd, 0xf8, 0x7e, 0xd6, 0x5d, 0x50, 0xcf, 0x5e, 0xab, 0xc6, 0x53,
++      0x67, 0x7d, 0x1e, 0x4d, 0x45, 0x08, 0x98, 0x4e, 0x05, 0x7e, 0xfa, 0xbe,
++      0xff, 0xe9, 0x0b, 0xd6, 0xac, 0x9b, 0xce, 0xfa, 0xfe, 0x79, 0x9c, 0x33,
++      0x56, 0x1c, 0x91, 0x18, 0x56, 0x44, 0xee, 0x2c, 0x3c, 0xb0, 0x4e, 0x3b,
++      0x97, 0x67, 0x15, 0x62, 0x65, 0x45, 0xac, 0x24, 0xd2, 0x00, 0xff, 0xd8,
++      0x2c, 0xff, 0x9b, 0x09, 0x59, 0xb7, 0xfc, 0x80, 0x5c, 0xca, 0xf0, 0xed,
++      0xc7, 0x2c, 0xff, 0x4f, 0xd3, 0x6f, 0x15, 0xa3, 0xc2, 0x83, 0xab, 0x13,
++      0x1f, 0x5f, 0x4f, 0x8d, 0x40, 0x59, 0xd6, 0xe0, 0x63, 0x7e, 0x05, 0xe7,
++      0x35, 0xf3, 0x30, 0xe5, 0xaf, 0x45, 0xf2, 0x3d, 0xf5, 0x58, 0x43, 0x98,
++      0xf1, 0x39, 0xf7, 0xbc, 0x76, 0x49, 0x46, 0xf7, 0x45, 0x95, 0xdc, 0x33,
++      0xd9, 0xf6, 0xd0, 0x1f, 0xc8, 0x77, 0x3a, 0x29, 0x97, 0xc5, 0xbe, 0x80,
++      0x0d, 0x09, 0xcb, 0x7a, 0x8a, 0x79, 0xaa, 0x3c, 0xeb, 0xff, 0x79, 0xfa,
++      0xf7, 0xd6, 0x84, 0xd7, 0x89, 0xb7, 0x8c, 0xa9, 0xed, 0xf9, 0x51, 0x19,
++      0x31, 0x99, 0x2f, 0xd9, 0x27, 0xea, 0x98, 0x51, 0xb7, 0x71, 0x2f, 0xfd,
++      0x6e, 0x7e, 0x40, 0xf7, 0x27, 0xf1, 0xef, 0x96, 0xbf, 0x46, 0x0f, 0x0e,
++      0x29, 0x85, 0x75, 0xe2, 0x0b, 0xd7, 0x83, 0x2b, 0x62, 0x2e, 0x8e, 0x6f,
++      0x8f, 0xcd, 0xf7, 0x8b, 0x88, 0x71, 0x88, 0x39, 0x23, 0xb3, 0xfc, 0x5b,
++      0x12, 0xf6, 0x38, 0xc9, 0x17, 0x15, 0x1c, 0x6b, 0x98, 0xe5, 0xef, 0x4e,
++      0x7b, 0xb1, 0x9d, 0xf1, 0xb8, 0xc4, 0x68, 0xc0, 0x23, 0x69, 0x15, 0xb7,
++      0xdd, 0xef, 0xc5, 0x5a, 0x72, 0xd1, 0x8d, 0x7d, 0xdf, 0x80, 0x71, 0xa9,
++      0x13, 0xb7, 0xd2, 0xfe, 0xd6, 0xf5, 0x15, 0xdb, 0x39, 0xc8, 0xfa, 0x3e,
++      0x27, 0xea, 0x2f, 0xad, 0x40, 0xbc, 0xa6, 0x18, 0xdf, 0x37, 0x1d, 0xcc,
++      0x7b, 0xca, 0x30, 0x64, 0x63, 0xa2, 0xe4, 0xb2, 0x82, 0x73, 0xa2, 0x37,
++      0x87, 0xbd, 0x2e, 0xf9, 0xf1, 0x58, 0xfe, 0x5b, 0x2b, 0x5b, 0xb3, 0xdd,
++      0xc6, 0x5f, 0x47, 0xc4, 0xb4, 0xe3, 0x25, 0x90, 0xe3, 0x69, 0x5d, 0xe7,
++      0x3d, 0x57, 0x6e, 0x51, 0xe6, 0x44, 0x02, 0x13, 0x8b, 0x15, 0x07, 0xc2,
++      0x81, 0x8a, 0x58, 0x65, 0x24, 0x8c, 0x65, 0x99, 0x2e, 0x9f, 0xcf, 0x7e,
++      0x56, 0x1d, 0xc1, 0xe9, 0x45, 0x26, 0x73, 0x60, 0x38, 0x97, 0x51, 0xf7,
++      0x4d, 0xd4, 0xeb, 0x66, 0xf3, 0x0f, 0x56, 0xd6, 0xf6, 0x7b, 0x37, 0x62,
++      0x9a, 0x65, 0xad, 0xa3, 0x7e, 0x1d, 0xd4, 0xe3, 0xcf, 0xf2, 0xfa, 0x15,
++      0x9d, 0x96, 0x8d, 0xfd, 0xde, 0x3a, 0x46, 0xfd, 0xba, 0xd9, 0x9e, 0x9b,
++      0xed, 0x95, 0x8c, 0x9d, 0xaf, 0xe7, 0x62, 0xca, 0xb3, 0xcc, 0x96, 0xa1,
++      0x52, 0x9e, 0xf5, 0xf9, 0xa3, 0x4a, 0x01, 0xb7, 0xff, 0xd4, 0x98, 0x5e,
++      0x99, 0x92, 0x83, 0x88, 0xfe, 0xfd, 0xd4, 0xbf, 0x60, 0xb8, 0xcc, 0x41,
++      0xbd, 0xac, 0xfb, 0xf4, 0x02, 0xa3, 0x4c, 0xd6, 0x15, 0x4c, 0x33, 0x22,
++      0xf8, 0x76, 0x8b, 0x07, 0x6f, 0x26, 0xca, 0xed, 0x71, 0x5f, 0x3a, 0xd7,
++      0xb2, 0x1e, 0x0f, 0xf9, 0xf1, 0x73, 0xa3, 0x2e, 0xbc, 0x40, 0xd5, 0x31,
++      0xa9, 0x79, 0x91, 0x20, 0xce, 0x76, 0xa5, 0x66, 0x73, 0xbe, 0xbc, 0xd8,
++      0x92, 0xc2, 0x46, 0xda, 0x93, 0xdf, 0x11, 0x01, 0xde, 0x48, 0x18, 0xc1,
++      0xcd, 0xec, 0x7f, 0xd8, 0xdb, 0x40, 0xfe, 0xad, 0x36, 0x91, 0xaa, 0xc5,
++      0x4b, 0x22, 0x46, 0x7c, 0x2b, 0xfe, 0xc3, 0x1a, 0x22, 0xce, 0x17, 0x85,
++      0x64, 0x6d, 0x6e, 0x0e, 0x8e, 0x6b, 0x0e, 0x3c, 0x1b, 0x9c, 0x8e, 0x28,
++      0xdd, 0xb1, 0xcc, 0x78, 0xcb, 0xfa, 0xa1, 0x57, 0xfa, 0x91, 0xb1, 0xfc,
++      0x86, 0xe3, 0x50, 0x6c, 0x2c, 0xdc, 0x92, 0x6a, 0xa0, 0xbe, 0x2f, 0xec,
++      0xff, 0xdf, 0xad, 0x49, 0xaf, 0xf4, 0xcf, 0x5c, 0x9e, 0xf1, 0xec, 0xc8,
++      0x1f, 0xc5, 0xee, 0x97, 0xac, 0xe7, 0xec, 0x36, 0x17, 0xb9, 0x73, 0x71,
++      0x50, 0xda, 0xfb, 0x17, 0x8e, 0x4f, 0xda, 0x2c, 0xf4, 0x23, 0x7a, 0xcb,
++      0xba, 0xc5, 0x9f, 0xb7, 0xa4, 0x44, 0x7f, 0x82, 0x57, 0xc7, 0x2c, 0x4c,
++      0x97, 0xf3, 0x87, 0xed, 0xb2, 0x71, 0xea, 0xab, 0x8b, 0x36, 0xc4, 0xd8,
++      0xcb, 0x3c, 0x4e, 0x76, 0x51, 0x68, 0x76, 0x9e, 0xb6, 0x89, 0xdc, 0x7e,
++      0xc8, 0x5b, 0x89, 0x2d, 0x26, 0xed, 0xce, 0x50, 0x2f, 0x76, 0x42, 0x72,
++      0x53, 0x39, 0x77, 0x61, 0xd2, 0xeb, 0xc0, 0x56, 0xd3, 0x89, 0x76, 0x43,
++      0xd5, 0xe5, 0xba, 0x23, 0x24, 0xe7, 0x2e, 0xf8, 0x6b, 0x14, 0x6c, 0x0f,
++      0xab, 0x58, 0x6f, 0x74, 0xf9, 0xe5, 0xfa, 0x92, 0x90, 0x9c, 0x2b, 0x58,
++      0x43, 0x9d, 0xc4, 0x35, 0x05, 0x1b, 0x0c, 0x79, 0xbe, 0x98, 0xe3, 0xbe,
++      0x31, 0x58, 0xd6, 0x76, 0xb3, 0xf1, 0x8a, 0x32, 0x48, 0x9c, 0x17, 0x2e,
++      0xf7, 0xde, 0xcd, 0xf3, 0x03, 0x71, 0x12, 0x31, 0x3d, 0x56, 0x42, 0x3f,
++      0xdd, 0xd2, 0x37, 0x87, 0xf5, 0x14, 0x72, 0x1c, 0xa7, 0x6f, 0x1b, 0x24,
++      0x7e, 0x06, 0xfc, 0x3f, 0x65, 0xf2, 0x34, 0xe4, 0x9d, 0x47, 0xcd, 0x1a,
++      0xfe, 0x93, 0x9c, 0xb7, 0x4a, 0xc3, 0xb9, 0xf1, 0x07, 0xd0, 0xdb, 0x4b,
++      0x94, 0x79, 0xc1, 0x0a, 0xe6, 0x00, 0x71, 0xe2, 0xfb, 0xc8, 0x98, 0x13,
++      0x9b, 0x53, 0x86, 0xb6, 0xcf, 0xe6, 0x6e, 0x4e, 0xea, 0xc2, 0xc9, 0x1c,
++      0x3f, 0xa0, 0x4d, 0x28, 0x85, 0xf3, 0x39, 0x82, 0x0d, 0xe4, 0xe2, 0x82,
++      0x6f, 0x71, 0xeb, 0xc9, 0x06, 0x49, 0xdb, 0xdc, 0xfe, 0x58, 0xda, 0xc3,
++      0x43, 0xe3, 0xe1, 0xf5, 0xaf, 0x4d, 0xfb, 0xfc, 0x6b, 0xd2, 0xf0, 0xb7,
++      0xa5, 0x0b, 0x76, 0x59, 0xf0, 0x6d, 0xc1, 0x36, 0x8b, 0x7c, 0x33, 0x97,
++      0x73, 0x75, 0x49, 0x4e, 0x03, 0x79, 0x3e, 0xf6, 0xde, 0xcd, 0x4f, 0xd1,
++      0xd6, 0x5d, 0xe4, 0xf2, 0x5b, 0x8d, 0x78, 0x54, 0x9e, 0xd7, 0x19, 0x21,
++      0xdd, 0x57, 0xa4, 0xf8, 0xb1, 0xa5, 0xfe, 0x77, 0x9c, 0x4f, 0x72, 0xdc,
++      0xf4, 0xa7, 0x4a, 0x72, 0xf3, 0x21, 0x7e, 0x26, 0x18, 0xe0, 0x67, 0x1e,
++      0xe4, 0xf3, 0x77, 0xb1, 0x9f, 0x4d, 0xe9, 0xa9, 0x3e, 0xa0, 0xe0, 0x1a,
++      0xb6, 0xd5, 0x18, 0x82, 0x73, 0x69, 0xfd, 0x7f, 0x59, 0x59, 0xef, 0xd4,
++      0x7d, 0x11, 0x20, 0x87, 0x80, 0xb3, 0xad, 0x5e, 0xce, 0x15, 0x34, 0x86,
++      0xe5, 0x5c, 0x41, 0x9b, 0x91, 0x93, 0x4f, 0x7c, 0xb7, 0x9b, 0xb8, 0x7d,
++      0xee, 0xfc, 0x42, 0x2c, 0x32, 0x71, 0x7b, 0x0a, 0xb1, 0xa2, 0x88, 0x60,
++      0x91, 0xdb, 0xff, 0x5c, 0xba, 0x9e, 0x5c, 0x5c, 0x9e, 0x7f, 0xbb, 0x39,
++      0xe7, 0x1e, 0xff, 0xb3, 0xe9, 0x2b, 0x71, 0xdb, 0xae, 0x30, 0xda, 0x77,
++      0xc9, 0x86, 0x23, 0xe6, 0x60, 0xa1, 0x80, 0x7f, 0x14, 0x9a, 0xff, 0x38,
++      0x75, 0x72, 0x94, 0x72, 0x1e, 0x3b, 0x4f, 0x4e, 0xd1, 0x21, 0xfc, 0x77,
++      0x24, 0xdc, 0x48, 0x87, 0xde, 0xb7, 0xe2, 0x36, 0xe7, 0xf0, 0xfa, 0xef,
++      0x4c, 0xf8, 0x91, 0xb5, 0xb9, 0xe7, 0xbf, 0xbb, 0x25, 0x47, 0xec, 0x49,
++      0xc5, 0xa3, 0x4c, 0x79, 0xf3, 0xf3, 0xab, 0x87, 0x65, 0x6e, 0xdf, 0x48,
++      0xc8, 0xbd, 0xe8, 0x37, 0x54, 0xe8, 0x7e, 0x95, 0xb1, 0xb4, 0xdf, 0x14,
++      0xfb, 0xb5, 0xec, 0x67, 0xfb, 0xac, 0x18, 0xf7, 0x44, 0x02, 0xad, 0xf5,
++      0xbc, 0xae, 0x2d, 0x40, 0xac, 0x8a, 0x7a, 0x2a, 0x35, 0xbc, 0xfe, 0xba,
++      0x71, 0x9f, 0xdf, 0x1c, 0x87, 0xff, 0x92, 0xf1, 0xa9, 0x22, 0x90, 0xa3,
++      0xab, 0x1f, 0x87, 0x05, 0x5e, 0xff, 0xba, 0xc4, 0x1c, 0xa8, 0x91, 0xb8,
++      0xb5, 0xa4, 0xe1, 0xb4, 0x35, 0x27, 0x62, 0x64, 0x8f, 0x51, 0x86, 0xf7,
++      0x2f, 0xd7, 0xe3, 0x33, 0x1d, 0x47, 0xef, 0xd5, 0xa6, 0xf4, 0xf1, 0x5e,
++      0xe8, 0xff, 0x6f, 0x1f, 0x85, 0x38, 0x47, 0x7b, 0x68, 0x90, 0x31, 0x48,
++      0xbc, 0x2b, 0x62, 0xce, 0x29, 0x63, 0xf9, 0x54, 0xe1, 0xb9, 0x47, 0x7e,
++      0x5c, 0x0a, 0xe7, 0x1a, 0x36, 0x0f, 0xce, 0xc5, 0x30, 0xcb, 0xea, 0x36,
++      0x7c, 0xf9, 0xe7, 0x67, 0x9c, 0xb3, 0xcc, 0xd1, 0x2b, 0x9c, 0x58, 0x4c,
++      0x3f, 0x68, 0xfc, 0x4b, 0x27, 0xa2, 0xbe, 0x62, 0xc6, 0x56, 0x59, 0x17,
++      0x3a, 0x5e, 0x3f, 0x69, 0x4d, 0x18, 0xf5, 0x68, 0xcc, 0xc8, 0xf3, 0x4c,
++      0x07, 0xed, 0xdb, 0xc2, 0x23, 0xa6, 0xdc, 0x17, 0x9c, 0x89, 0xc7, 0x1c,
++      0xb4, 0x15, 0xb7, 0xa1, 0xb7, 0xfe, 0xbd, 0x52, 0x81, 0xd2, 0x88, 0x33,
++      0x38, 0x01, 0x3d, 0xbc, 0x5e, 0xa1, 0x1f, 0x56, 0xcd, 0x33, 0x65, 0x0a,
++      0xde, 0x4e, 0x04, 0xcc, 0x40, 0x3e, 0x2e, 0x9d, 0xe2, 0xdc, 0xbd, 0x93,
++      0x30, 0xda, 0x9f, 0xca, 0x9f, 0xff, 0x22, 0x3d, 0x35, 0xa7, 0x15, 0x7b,
++      0x74, 0xbb, 0x37, 0x25, 0xf0, 0x9e, 0xa3, 0x01, 0xef, 0xed, 0x31, 0x8b,
++      0x98, 0x8b, 0x89, 0x9d, 0xba, 0xdd, 0x5b, 0x12, 0x98, 0x74, 0xf2, 0xda,
++      0x29, 0x73, 0x36, 0x31, 0x4d, 0xe5, 0xb5, 0xb0, 0xd8, 0x59, 0x4c, 0x63,
++      0x7c, 0x2d, 0x8d, 0x78, 0xdd, 0xa5, 0xe3, 0xd0, 0x4a, 0x8c, 0x0a, 0xe6,
++      0xba, 0x68, 0x72, 0x24, 0x75, 0x7f, 0xb3, 0xa3, 0x9e, 0x39, 0xaf, 0x5f,
++      0x71, 0x19, 0xdf, 0x63, 0x5e, 0x2f, 0x6b, 0x61, 0x61, 0xda, 0xa4, 0x93,
++      0x15, 0x76, 0x4c, 0x57, 0x23, 0x0a, 0xb1, 0xb0, 0x02, 0xb7, 0x6b, 0x1b,
++      0x3e, 0xab, 0x46, 0xfa, 0x71, 0x7d, 0x83, 0xbb, 0xa9, 0x72, 0xbc, 0xa0,
++      0x13, 0xc4, 0x3c, 0x11, 0xe6, 0x25, 0x06, 0xd4, 0xf2, 0x88, 0xe8, 0xc6,
++      0xdf, 0x94, 0x1c, 0x13, 0x59, 0x35, 0x77, 0xdf, 0xd8, 0x3b, 0x25, 0x28,
++      0x0d, 0x13, 0xab, 0x7e, 0xe2, 0xfb, 0xef, 0xd5, 0x3b, 0x5a, 0x22, 0x78,
++      0xef, 0x32, 0xe4, 0xbf, 0x6d, 0x5b, 0x6e, 0x77, 0xe4, 0x83, 0x98, 0x3b,
++      0x60, 0x59, 0x8c, 0x93, 0x3e, 0x28, 0xb3, 0x39, 0x1e, 0xfa, 0x1a, 0xe7,
++      0x66, 0x4d, 0xfa, 0x0f, 0xd6, 0xe7, 0x9c, 0x36, 0x07, 0x70, 0x17, 0x47,
++      0x3a, 0x6e, 0x79, 0xcb, 0xf8, 0xc0, 0x7a, 0x33, 0xc1, 0x5c, 0xd9, 0x90,
++      0x67, 0x43, 0x73, 0xb0, 0xcd, 0x74, 0x36, 0x2f, 0x55, 0x14, 0xf4, 0x18,
++      0xf3, 0xb4, 0x12, 0xc6, 0xa9, 0x6e, 0xfa, 0x75, 0xcc, 0x6b, 0x04, 0xf7,
++      0x80, 0xe5, 0xd2, 0xeb, 0xd6, 0xb9, 0x22, 0x77, 0xde, 0x32, 0xd2, 0x20,
++      0x58, 0x10, 0x6e, 0x7b, 0xca, 0x68, 0x41, 0x4f, 0x66, 0x10, 0xbd, 0x99,
++      0x5c, 0x3f, 0x59, 0xcc, 0xf9, 0x98, 0x7e, 0xd6, 0xad, 0x2b, 0x8e, 0x08,
++      0xf7, 0x3a, 0x73, 0xcb, 0x5e, 0x23, 0x8a, 0xcd, 0x99, 0x3b, 0x6f, 0x39,
++      0xd5, 0xd0, 0xcf, 0xff, 0xb9, 0x3a, 0x43, 0xa8, 0xfc, 0xd8, 0x3a, 0x65,
++      0x11, 0xe9, 0xa3, 0xe3, 0x96, 0xa7, 0x8c, 0x3b, 0x6f, 0x69, 0x5f, 0xf4,
++      0x4d, 0x6c, 0xca, 0xb4, 0xff, 0xc9, 0x7e, 0xca, 0x59, 0xa7, 0x34, 0x72,
++      0xa8, 0xed, 0x9a, 0xc0, 0x9d, 0xb7, 0xa4, 0x17, 0xf5, 0xb2, 0x8f, 0x55,
++      0x8c, 0x2f, 0xb9, 0x3a, 0x51, 0xc6, 0xf6, 0x8f, 0xd3, 0x41, 0x49, 0x64,
++      0xa2, 0x6d, 0x7e, 0xe0, 0x03, 0x6b, 0x5e, 0x5f, 0x91, 0xad, 0x03, 0x17,
++      0x75, 0xf0, 0xa0, 0xe9, 0xcc, 0x06, 0x1c, 0xb6, 0x0e, 0x3a, 0x7c, 0xd4,
++      0x41, 0x92, 0x3a, 0xc8, 0xd6, 0x18, 0xe1, 0x77, 0xa9, 0x83, 0x79, 0x63,
++      0xeb, 0xd6, 0x95, 0x44, 0xe0, 0x74, 0x18, 0xaf, 0x3a, 0x9c, 0x9c, 0x0b,
++      0x97, 0xb1, 0x8e, 0x7a, 0xbb, 0xf3, 0x96, 0x8b, 0x17, 0xd9, 0x3a, 0xff,
++      0xb2, 0x3b, 0xb0, 0xc1, 0xde, 0x3b, 0xd7, 0x9d, 0x59, 0xc3, 0xa3, 0x99,
++      0xc7, 0x7d, 0x3c, 0x7a, 0x98, 0xb3, 0xdc, 0x4c, 0x5d, 0x35, 0x71, 0x1c,
++      0x2b, 0x28, 0xd7, 0x46, 0xfe, 0x6e, 0xe5, 0xef, 0x0e, 0xfe, 0x96, 0xf9,
++      0x51, 0xcf, 0xca, 0x16, 0x3b, 0x2b, 0x9b, 0x83, 0xf2, 0x78, 0x88, 0x57,
++      0x32, 0x26, 0xf7, 0x57, 0xae, 0x09, 0xc4, 0xd8, 0xc6, 0xfd, 0xa5, 0xb2,
++      0x6f, 0xc8, 0x65, 0xc4, 0x7d, 0x4e, 0x88, 0x7c, 0x7a, 0x6b, 0x3b, 0xb2,
++      0xc4, 0xde, 0xdf, 0xe7, 0xb0, 0x97, 0xb2, 0x55, 0x70, 0x7e, 0x5e, 0x58,
++      0x34, 0x34, 0xc3, 0x63, 0xc0, 0xe7, 0x36, 0xe2, 0xcc, 0xf9, 0x13, 0xd4,
++      0x81, 0xd8, 0xc9, 0x3d, 0xd4, 0x5f, 0x27, 0xeb, 0x1c, 0x65, 0x2c, 0xdb,
++      0xcd, 0xfe, 0xed, 0xf5, 0xdb, 0xb0, 0xfd, 0x9c, 0x0c, 0xba, 0x79, 0x9c,
++      0xed, 0xed, 0x35, 0x7e, 0x53, 0x76, 0xb4, 0x5e, 0xf6, 0x53, 0x3a, 0x31,
++      0x6c, 0xcf, 0xbb, 0x42, 0x2e, 0x73, 0x11, 0x79, 0x82, 0x65, 0xfd, 0xd4,
++      0x68, 0x9c, 0xef, 0xb0, 0xed, 0xea, 0x50, 0x9b, 0x3b, 0xe0, 0xc6, 0x90,
++      0xbd, 0x06, 0x6e, 0x59, 0x45, 0xb6, 0x7d, 0x89, 0x2c, 0x75, 0xcd, 0x9b,
++      0x68, 0x78, 0xeb, 0xd2, 0x1f, 0x90, 0x27, 0x8a, 0xfc, 0x73, 0x70, 0x92,
++      0x31, 0x35, 0xaa, 0xc5, 0xdb, 0x45, 0xd6, 0x32, 0xc3, 0x19, 0xbe, 0x16,
++      0xf1, 0x16, 0x27, 0xfb, 0x6b, 0x26, 0xa7, 0x3c, 0x95, 0xc7, 0xee, 0x7d,
++      0x69, 0x3d, 0xb6, 0x5f, 0xc9, 0xf1, 0xd3, 0xde, 0xb1, 0x42, 0xfc, 0x09,
++      0x92, 0xcf, 0x7a, 0xe0, 0x8c, 0xe8, 0xfe, 0x26, 0x47, 0x57, 0xd0, 0x05,
++      0xfa, 0x58, 0xa9, 0xc8, 0x1b, 0xa7, 0xec, 0x82, 0xc7, 0x6e, 0x6d, 0x8d,
++      0x8d, 0xd1, 0xf1, 0xf9, 0x2e, 0x78, 0xb4, 0xb5, 0xe9, 0x42, 0xec, 0xf2,
++      0x68, 0x6d, 0x09, 0xf1, 0x77, 0x59, 0xab, 0x0f, 0xdb, 0xdc, 0xe3, 0x48,
++      0xe6, 0xa5, 0x52, 0xd9, 0x8b, 0x47, 0xdf, 0xaf, 0x70, 0x1a, 0xb9, 0x76,
++      0x35, 0xb6, 0xdb, 0xe2, 0xd0, 0x70, 0xce, 0x77, 0x75, 0xad, 0xc5, 0x21,
++      0xfb, 0x5f, 0x89, 0x4a, 0xe9, 0x7c, 0xbd, 0x1c, 0x7e, 0x2d, 0x76, 0xd9,
++      0xf8, 0xc5, 0x36, 0x4a, 0x81, 0x25, 0x89, 0x0b, 0xfb, 0x97, 0xfe, 0xa4,
++      0xdf, 0xae, 0x2a, 0x15, 0x13, 0xf6, 0xb3, 0x92, 0x83, 0x99, 0x18, 0x06,
++      0x53, 0x53, 0xf7, 0xe8, 0xe9, 0x87, 0xd8, 0xfe, 0x81, 0x38, 0xe7, 0x69,
++      0xb6, 0x21, 0xfb, 0xf7, 0x64, 0xcf, 0xde, 0xd4, 0xfd, 0x7a, 0x22, 0x5b,
++      0x65, 0x19, 0x81, 0x0d, 0x7b, 0x89, 0x7f, 0xd1, 0x16, 0xa9, 0x6f, 0x59,
++      0xaf, 0xcd, 0x0b, 0x22, 0x3b, 0xcd, 0x89, 0xc1, 0xb9, 0xc0, 0x40, 0x52,
++      0xf6, 0x53, 0x9d, 0x89, 0xad, 0x66, 0x1e, 0x19, 0xad, 0xae, 0xd3, 0xba,
++      0x55, 0xd9, 0x0b, 0xf5, 0xc1, 0x97, 0x7b, 0x8c, 0x5a, 0xad, 0x47, 0xcd,
++      0xee, 0x67, 0x7c, 0xd9, 0x0d, 0xcc, 0x2e, 0x13, 0x0c, 0xa8, 0x32, 0xa2,
++      0xbd, 0x55, 0x98, 0x0b, 0x7f, 0xb5, 0x8d, 0xcb, 0xf1, 0x6f, 0xab, 0x46,
++      0x70, 0xa5, 0xf0, 0x4a, 0xf5, 0x7d, 0x6b, 0x88, 0xdc, 0xe4, 0xee, 0xb9,
++      0xff, 0xa7, 0x34, 0xbf, 0xee, 0xd4, 0x3e, 0x9d, 0xf3, 0xf2, 0xf3, 0x05,
++      0xba, 0x3f, 0xad, 0x88, 0x8e, 0x84, 0x4b, 0x25, 0xb0, 0x95, 0x71, 0xf6,
++      0xbf, 0xe6, 0x46, 0xb0, 0x8f, 0xff, 0x7f, 0x76, 0xa5, 0xec, 0x4d, 0xb5,
++      0xac, 0x60, 0x60, 0x5e, 0xb8, 0x8a, 0x63, 0x78, 0x96, 0xf7, 0x7b, 0x33,
++      0x6f, 0x59, 0xa7, 0xa6, 0x1b, 0xfd, 0xcb, 0x18, 0xec, 0x06, 0xc6, 0x75,
++      0x6d, 0x52, 0xfd, 0xef, 0xee, 0x95, 0x83, 0xbb, 0x82, 0x63, 0xf9, 0x7e,
++      0xa0, 0x4e, 0x4b, 0xaa, 0xa5, 0x65, 0xa2, 0xd7, 0x81, 0xf1, 0x57, 0xa6,
++      0x3c, 0x3b, 0x28, 0xf0, 0x59, 0x7b, 0x5d, 0xa5, 0x77, 0x88, 0xbe, 0x3e,
++      0xa4, 0x45, 0xe3, 0xd4, 0xbb, 0x7b, 0x1a, 0xc7, 0x7c, 0xf7, 0xdc, 0x2f,
++      0xd9, 0xe3, 0xac, 0x36, 0x66, 0x72, 0x8c, 0x0a, 0xb4, 0xb9, 0xff, 0x99,
++      0x5f, 0x7f, 0x6d, 0x24, 0xfb, 0x1a, 0xb2, 0x9a, 0xe8, 0x1b, 0x45, 0xac,
++      0x73, 0xb5, 0xf9, 0xf0, 0x8c, 0xae, 0x7a, 0xdd, 0x77, 0x37, 0x6d, 0x34,
++      0x34, 0xf7, 0xd7, 0x16, 0x6d, 0xda, 0xfc, 0x16, 0x47, 0x7d, 0x5b, 0xc2,
++      0x8e, 0x55, 0x9c, 0x57, 0x23, 0x3a, 0x57, 0x79, 0xc7, 0x42, 0x4d, 0x20,
++      0x3c, 0xd7, 0x1e, 0x3f, 0x70, 0x6b, 0x3a, 0x81, 0x6d, 0x29, 0x69, 0x53,
++      0xc1, 0xb2, 0xc0, 0xdb, 0x96, 0x7f, 0x7a, 0x02, 0x5b, 0x32, 0x9f, 0xc4,
++      0x4d, 0x07, 0xc9, 0x8d, 0xf5, 0xd6, 0x38, 0xf4, 0x68, 0xee, 0xd9, 0xd4,
++      0x1c, 0x59, 0xdb, 0x96, 0xbd, 0x45, 0xb7, 0x24, 0x02, 0x70, 0x97, 0x13,
++      0x83, 0xc7, 0x02, 0xf2, 0x2c, 0xd3, 0x8b, 0x6c, 0x8b, 0x94, 0xa9, 0xd5,
++      0xc6, 0x90, 0x25, 0x73, 0x94, 0xb5, 0xd0, 0xfe, 0xb2, 0xdc, 0x3e, 0x09,
++      0x1a, 0x5e, 0x8d, 0xae, 0xbd, 0x41, 0xae, 0xd7, 0x6c, 0x48, 0x1b, 0x0a,
++      0xe6, 0x07, 0xa6, 0xa1, 0x6e, 0xe5, 0xab, 0xaf, 0x17, 0x05, 0x8a, 0x18,
++      0x4f, 0xc4, 0xb7, 0x8c, 0x8d, 0xc7, 0xf0, 0x1b, 0x62, 0x90, 0xec, 0x19,
++      0x4b, 0x4a, 0x3d, 0xb6, 0x35, 0x17, 0x69, 0xf1, 0x53, 0x43, 0xf6, 0x2f,
++      0x5b, 0xd6, 0x35, 0x81, 0x37, 0xad, 0x68, 0x0d, 0xe5, 0x21, 0x5f, 0xcb,
++      0xd5, 0x95, 0x32, 0xf9, 0xbd, 0x40, 0x4a, 0xe3, 0x2d, 0xa2, 0x93, 0x27,
++      0xcd, 0x38, 0xb3, 0x01, 0xc1, 0xfd, 0x0f, 0x62, 0x6f, 0x19, 0x8a, 0xfd,
++      0x8c, 0x71, 0x99, 0x52, 0xc9, 0x38, 0xea, 0xf4, 0x8f, 0xd8, 0xeb, 0x05,
++      0x1d, 0xc4, 0x68, 0xe1, 0x97, 0x92, 0xf3, 0x39, 0xf1, 0x94, 0x51, 0x85,
++      0x27, 0xb5, 0x1c, 0x57, 0x23, 0xd6, 0xe1, 0x07, 0x89, 0x79, 0x59, 0x7a,
++      0x08, 0x39, 0xaf, 0xd1, 0x7e, 0x46, 0xf9, 0x0d, 0xfd, 0x1c, 0x78, 0x21,
++      0xbd, 0x11, 0x0f, 0xca, 0x1a, 0xa2, 0x52, 0xdb, 0x5c, 0xe7, 0x90, 0xfe,
++      0x36, 0x62, 0x6b, 0x46, 0xda, 0xfa, 0x20, 0xb6, 0xd7, 0xd8, 0x9d, 0x97,
++      0x55, 0xb0, 0xfc, 0x83, 0xd8, 0x53, 0xc6, 0xe3, 0xf6, 0xdc, 0xc9, 0x73,
++      0xaf, 0x5e, 0x53, 0x30, 0xaf, 0x14, 0x2a, 0xf3, 0x06, 0x87, 0x71, 0x33,
++      0x1c, 0x55, 0xdf, 0xa4, 0xed, 0xc9, 0xbe, 0x9a, 0xaf, 0xc2, 0x59, 0xe5,
++      0xa2, 0x6f, 0xde, 0x0a, 0x57, 0x95, 0x70, 0xf5, 0x02, 0x8f, 0x8e, 0xf2,
++      0xbe, 0xe8, 0x36, 0xdc, 0x26, 0xba, 0x75, 0x12, 0x87, 0x7a, 0x24, 0xaf,
++      0x33, 0x2a, 0xa9, 0x23, 0xbd, 0x95, 0x9c, 0x1e, 0xe5, 0xc4, 0x4c, 0xc6,
++      0x47, 0x37, 0xf3, 0xb7, 0xb6, 0x77, 0xa9, 0xf7, 0x79, 0x7d, 0x65, 0xe4,
++      0xf0, 0x96, 0xf5, 0x3e, 0x39, 0xfc, 0xfc, 0x40, 0x5d, 0xd6, 0x20, 0x4e,
++      0xe1, 0x06, 0xbd, 0x39, 0x4e, 0xbc, 0x59, 0x6d, 0x9c, 0xb1, 0x62, 0xab,
++      0xa4, 0x8c, 0xee, 0x8b, 0x29, 0x85, 0x3e, 0x16, 0xc0, 0x3f, 0xcd, 0x82,
++      0x2b, 0x22, 0xcf, 0x14, 0x64, 0xbd, 0xb8, 0x51, 0x9e, 0xf5, 0xb5, 0xc8,
++      0xf8, 0x5d, 0xb2, 0xee, 0x86, 0xe8, 0x84, 0x0b, 0x46, 0x76, 0x9f, 0xcc,
++      0xd9, 0x0c, 0x0b, 0x81, 0x85, 0xbf, 0x67, 0x2e, 0x24, 0xf3, 0x53, 0x9b,
++      0xad, 0x57, 0xb2, 0x41, 0x1f, 0x39, 0xfd, 0xa3, 0xd0, 0x5b, 0x12, 0xd4,
++      0x75, 0x53, 0x48, 0x9e, 0xdf, 0x3b, 0x7d, 0x09, 0xd8, 0x3c, 0xde, 0x3c,
++      0x89, 0xcf, 0xa1, 0x9c, 0xb9, 0xeb, 0xdc, 0xb1, 0x15, 0xa8, 0xa8, 0x8a,
++      0xfa, 0x4a, 0x71, 0x19, 0xcf, 0xd7, 0x30, 0x3f, 0xf9, 0x22, 0x2a, 0x56,
++      0xb6, 0x22, 0xc1, 0xb1, 0x97, 0x1b, 0x7f, 0xc5, 0x6b, 0xf7, 0x21, 0x99,
++      0x72, 0x71, 0x1c, 0x3f, 0xb1, 0x2a, 0x6a, 0x44, 0x36, 0xd3, 0x5b, 0x66,
++      0x30, 0x9f, 0xb6, 0x75, 0x41, 0xdc, 0x4e, 0x09, 0x47, 0xaa, 0x8b, 0xae,
++      0x07, 0x73, 0xfb, 0x1a, 0xbd, 0x75, 0x8d, 0xd2, 0x41, 0x9b, 0xed, 0xa1,
++      0xce, 0xa5, 0xac, 0x65, 0x2d, 0x0f, 0x9c, 0xa6, 0x8e, 0x3b, 0x78, 0x6e,
++      0xf8, 0xdf, 0x84, 0x7a, 0x59, 0x31, 0x4e, 0x58, 0x71, 0xcd, 0x47, 0xbb,
++      0x54, 0x57, 0x09, 0x9f, 0x5a, 0x1a, 0x7a, 0x8f, 0xf7, 0xb5, 0xbc, 0x9d,
++      0x9e, 0xb9, 0x25, 0xa7, 0xcb, 0x30, 0x75, 0xf9, 0x6f, 0xf6, 0x75, 0x87,
++      0x7d, 0xbd, 0x23, 0x7f, 0xfd, 0xcc, 0x2d, 0x3d, 0xc6, 0xcb, 0xbc, 0xde,
++      0x4b, 0xdd, 0xab, 0x17, 0x49, 0xfd, 0x75, 0xa6, 0xd4, 0x67, 0x4a, 0x65,
++      0xf4, 0xe4, 0xe7, 0xe3, 0x50, 0x7e, 0x3e, 0x26, 0xf2, 0x6d, 0x38, 0xd9,
++      0x46, 0x3c, 0x5a, 0x0a, 0x13, 0x65, 0x01, 0xc1, 0x79, 0x91, 0x8b, 0x73,
++      0x97, 0x11, 0xb9, 0xd6, 0x30, 0xde, 0x75, 0x3d, 0x53, 0x8a, 0x78, 0xc7,
++      0x4c, 0xdb, 0x0e, 0xcf, 0xdc, 0x22, 0xfb, 0xde, 0xde, 0x52, 0x1a, 0x7d,
++      0xb2, 0x65, 0x23, 0x45, 0x2e, 0x7b, 0xaf, 0xe9, 0x0c, 0xd7, 0x3b, 0xe6,
++      0x65, 0x8b, 0x61, 0xc4, 0xce, 0x28, 0x2e, 0x8f, 0xe0, 0x43, 0x22, 0xdd,
++      0xc8, 0xcc, 0x2b, 0x1e, 0x64, 0xce, 0x14, 0xcc, 0x50, 0xb7, 0x6d, 0x44,
++      0xec, 0x43, 0xf6, 0xde, 0x37, 0xe7, 0xc4, 0x0a, 0x34, 0xea, 0x0e, 0xcc,
++      0x0b, 0xcf, 0x64, 0xe6, 0x45, 0xbb, 0x34, 0x8b, 0x1d, 0xba, 0xff, 0x7a,
++      0x2c, 0xb7, 0xeb, 0xed, 0x4b, 0x67, 0xdb, 0x4b, 0x39, 0xa7, 0x8f, 0x51,
++      0x8e, 0x6d, 0x01, 0x91, 0xe3, 0x9b, 0x79, 0x39, 0x5a, 0x19, 0x4b, 0x4d,
++      0xed, 0xda, 0x40, 0xef, 0x59, 0xbd, 0x3d, 0x63, 0xeb, 0xed, 0x3e, 0x9e,
++      0x17, 0x33, 0xbf, 0x2f, 0xc2, 0xd1, 0x7a, 0x6f, 0x7e, 0x1f, 0x9b, 0xe4,
++      0x6a, 0x82, 0xbf, 0x0d, 0x7f, 0xbd, 0xda, 0xd0, 0xc3, 0x0e, 0x9b, 0xd7,
++      0xbb, 0x11, 0xb7, 0x39, 0xb3, 0x3c, 0xf3, 0xae, 0xc0, 0x23, 0x76, 0x39,
++      0x17, 0x75, 0x52, 0x86, 0x47, 0xf3, 0xfe, 0x22, 0x7b, 0x0e, 0x1e, 0xb3,
++      0x7f, 0xef, 0xe6, 0xdc, 0xba, 0xe8, 0xab, 0x85, 0x18, 0x25, 0xeb, 0xed,
++      0xff, 0xc3, 0xf6, 0xfd, 0x21, 0x1c, 0xb7, 0xff, 0x67, 0x73, 0xf9, 0x16,
++      0x7a, 0x4c, 0xd9, 0x3b, 0x53, 0x86, 0x6e, 0x7b, 0x0f, 0xb9, 0xac, 0x01,
++      0x5c, 0x89, 0xcd, 0x9a, 0xac, 0x07, 0x93, 0xfb, 0x68, 0x62, 0x13, 0x9d,
++      0x48, 0x6a, 0xa6, 0x37, 0x53, 0x3f, 0x35, 0x57, 0x32, 0xb1, 0xa7, 0xfe,
++      0x03, 0x2b, 0x6a, 0xe7, 0x4f, 0x27, 0xac, 0xbd, 0xc6, 0xd1, 0x10, 0x3d,
++      0xb8, 0xbd, 0xc8, 0xd6, 0x6f, 0xb8, 0xcd, 0xde, 0xff, 0x47, 0x99, 0x9f,
++      0x49, 0x48, 0x1c, 0x9d, 0x83, 0xb4, 0x69, 0xc7, 0xe2, 0x96, 0xed, 0x9c,
++      0x93, 0x9e, 0x54, 0x20, 0x7a, 0x09, 0xef, 0x4d, 0x30, 0x96, 0x75, 0x53,
++      0x9f, 0xb1, 0x16, 0xe1, 0x67, 0x6b, 0xb0, 0x9b, 0x36, 0x36, 0x6e, 0x5a,
++      0xd6, 0x3e, 0x62, 0x44, 0xe5, 0x3c, 0x15, 0xd9, 0x9a, 0x35, 0x48, 0x31,
++      0x36, 0xed, 0x33, 0x1a, 0x3f, 0x57, 0x84, 0xb8, 0xdf, 0x0d, 0xdd, 0xb7,
++      0x85, 0xa3, 0xb9, 0x97, 0xf3, 0x75, 0xd4, 0x14, 0xde, 0xe8, 0x3c, 0xb3,
++      0x14, 0x46, 0x78, 0xb1, 0xe3, 0x27, 0xd6, 0xa4, 0xfd, 0xec, 0xb8, 0xeb,
++      0x5f, 0x28, 0xc3, 0x46, 0x71, 0xde, 0x4a, 0xce, 0xf1, 0xbb, 0x01, 0x79,
++      0x7e, 0x0d, 0xd4, 0xf5, 0x35, 0xb6, 0x8b, 0x0c, 0x7b, 0x43, 0xce, 0xd8,
++      0x3e, 0x04, 0x5a, 0x36, 0x28, 0xe7, 0x72, 0x83, 0x4b, 0xc6, 0x4c, 0x8c,
++      0xd6, 0x3f, 0x4b, 0x1e, 0x23, 0xf5, 0x8b, 0xf1, 0x84, 0xf9, 0xb4, 0x55,
++      0x3b, 0xe3, 0xfb, 0xd6, 0x7e, 0x43, 0x5d, 0x4f, 0x6d, 0xc7, 0xca, 0xd9,
++      0x56, 0x19, 0xdb, 0xba, 0x3d, 0xa0, 0x9b, 0xdb, 0xd9, 0xd6, 0xf1, 0xc4,
++      0xd1, 0xa0, 0x9b, 0x6d, 0x3d, 0x6a, 0x4a, 0x6e, 0xe0, 0x6c, 0x6e, 0xe6,
++      0xdc, 0x76, 0xa5, 0x02, 0xbe, 0xad, 0x94, 0x4b, 0xf2, 0xb7, 0xaf, 0x26,
++      0xe4, 0x5d, 0x8f, 0x6f, 0x72, 0x3c, 0xd1, 0x8d, 0x2e, 0x34, 0xde, 0x5b,
++      0x41, 0xfb, 0xa9, 0x44, 0xc1, 0xd6, 0x75, 0x1f, 0xf1, 0x0e, 0xb7, 0xb3,
++      0xcc, 0xeb, 0x81, 0x39, 0x78, 0x21, 0xd4, 0xb8, 0x72, 0x0e, 0x9c, 0xe4,
++      0x21, 0x81, 0xe6, 0x0d, 0x4a, 0x5c, 0x13, 0x5b, 0xbc, 0x2d, 0xad, 0x07,
++      0x9b, 0x20, 0xd8, 0xdd, 0x4a, 0x7d, 0xcc, 0xc1, 0xfb, 0x0b, 0x45, 0x2e,
++      0x67, 0x38, 0xe8, 0x08, 0x74, 0x3c, 0xcd, 0xf9, 0xad, 0x98, 0x97, 0xcb,
++      0x53, 0x33, 0xf6, 0x7e, 0xcd, 0x56, 0x24, 0x33, 0x27, 0xde, 0xdd, 0x6b,
++      0xc0, 0x79, 0xa8, 0xfe, 0x41, 0x0b, 0xf6, 0xbb, 0x21, 0x8d, 0x32, 0x0f,
++      0xad, 0x32, 0x0f, 0xa5, 0xf4, 0xa7, 0x6b, 0x28, 0xf7, 0x7a, 0x5b, 0xee,
++      0x39, 0x18, 0x36, 0x65, 0xfd, 0xcb, 0xa9, 0xdd, 0x86, 0x5e, 0x62, 0x67,
++      0xe0, 0x4c, 0x17, 0xfb, 0x79, 0x9d, 0x32, 0xcf, 0xa3, 0xde, 0x27, 0x5b,
++      0x84, 0xb7, 0xde, 0x87, 0xbe, 0x54, 0xe1, 0xdd, 0x11, 0x05, 0xe9, 0x80,
++      0xf4, 0x71, 0x1f, 0x79, 0x5c, 0x97, 0x35, 0x59, 0x23, 0xd7, 0x77, 0x33,
++      0xf7, 0x8f, 0x6a, 0xf4, 0x07, 0xea, 0x1d, 0xfa, 0x1c, 0xe8, 0x13, 0x6f,
++      0x38, 0xa2, 0xf4, 0x01, 0xd3, 0x7b, 0x86, 0xd8, 0x70, 0x08, 0x1d, 0x16,
++      0xaa, 0x6c, 0x7b, 0xf8, 0xd9, 0x88, 0xf1, 0xa1, 0x22, 0xb1, 0x3d, 0x4b,
++      0x1d, 0xa8, 0x9c, 0x13, 0xd1, 0x41, 0x39, 0x7d, 0x76, 0x2c, 0xa0, 0xfb,
++      0x5f, 0xa0, 0x3c, 0xdb, 0x29, 0xcf, 0x8a, 0xdc, 0x1c, 0xfa, 0x36, 0x2b,
++      0xe2, 0xd3, 0x81, 0x96, 0xd5, 0xbc, 0xbe, 0x8d, 0xf2, 0x04, 0xfa, 0x14,
++      0x0c, 0xb5, 0xf4, 0x90, 0x2b, 0x76, 0x50, 0x07, 0xe7, 0xe4, 0x71, 0xdb,
++      0x73, 0xd6, 0x41, 0x2e, 0x50, 0x8c, 0xbd, 0xa6, 0xe0, 0xb7, 0x86, 0x61,
++      0xda, 0xe9, 0x1e, 0xce, 0x48, 0xd4, 0xab, 0xa2, 0xd8, 0x10, 0x0c, 0xa8,
++      0xe1, 0x35, 0x17, 0xe7, 0xa6, 0x12, 0xfb, 0xb5, 0xdd, 0xf6, 0x5e, 0xe5,
++      0x1c, 0xb7, 0xfb, 0x83, 0x35, 0xea, 0x15, 0x7e, 0x26, 0xeb, 0x63, 0xb2,
++      0x86, 0xd4, 0xeb, 0xc9, 0xed, 0xd7, 0x72, 0x51, 0x27, 0xb9, 0xeb, 0xcf,
++      0x68, 0xc2, 0x7d, 0x0b, 0xe5, 0x7f, 0x69, 0x3d, 0x69, 0x97, 0x97, 0x72,
++      0x2e, 0x9b, 0xa3, 0x97, 0xda, 0xe5, 0x7e, 0x69, 0x3d, 0xab, 0x39, 0xa7,
++      0x94, 0x2b, 0x3c, 0x2f, 0x3c, 0xfa, 0x0d, 0x27, 0x31, 0xaf, 0x78, 0xee,
++      0x62, 0x1c, 0x33, 0x4e, 0xd4, 0x9e, 0xac, 0xef, 0x64, 0x1c, 0x9b, 0xba,
++      0x7f, 0xcb, 0xc2, 0xe3, 0x76, 0x1e, 0xde, 0x45, 0x3e, 0x7b, 0x74, 0x47,
++      0x11, 0x84, 0xa3, 0xca, 0xfa, 0x5d, 0x73, 0xd9, 0xb9, 0x5c, 0x56, 0xf6,
++      0x35, 0x5d, 0x66, 0x73, 0xc3, 0xa8, 0x2a, 0xb8, 0xfb, 0x49, 0x7b, 0xf8,
++      0x84, 0xbb, 0x74, 0x62, 0x8f, 0x51, 0xe0, 0x2c, 0x47, 0x1f, 0x54, 0x89,
++      0x93, 0x03, 0xe6, 0x62, 0x89, 0xcd, 0x7e, 0xd6, 0x0f, 0xc6, 0xd4, 0xa9,
++      0xdc, 0xe6, 0x76, 0x0f, 0x2a, 0xba, 0xb6, 0x3a, 0x20, 0xfb, 0x47, 0x65,
++      0x2f, 0xa8, 0xf4, 0x55, 0x92, 0x5f, 0x97, 0xfa, 0x38, 0xae, 0x51, 0xe8,
++      0x4b, 0xf8, 0xc6, 0xfb, 0xa5, 0x85, 0x7d, 0x86, 0x51, 0x5b, 0xce, 0x5f,
++      0x59, 0x2b, 0xb5, 0xec, 0x4c, 0x0d, 0xe7, 0xcb, 0x1e, 0xcd, 0xcb, 0x1e,
++      0xfb, 0xd8, 0x75, 0xb5, 0xa9, 0xfb, 0xee, 0x82, 0xf9, 0xe7, 0x5d, 0xf2,
++      0x0c, 0x46, 0xd6, 0x5c, 0xe5, 0x9e, 0x82, 0x2e, 0xe2, 0x50, 0x54, 0x6b,
++      0x64, 0x9c, 0xd7, 0x7d, 0x6b, 0x39, 0x1f, 0x71, 0xaf, 0xec, 0x51, 0x2f,
++      0xc4, 0xc8, 0x62, 0xe4, 0xd6, 0x3e, 0x65, 0x9f, 0x45, 0x6e, 0xbd, 0x93,
++      0x76, 0x8f, 0xae, 0xf4, 0xef, 0xad, 0xac, 0xd7, 0xc9, 0x58, 0x78, 0x6e,
++      0x7f, 0xf4, 0x10, 0xf5, 0x3a, 0xcc, 0x7b, 0x9b, 0xcf, 0xae, 0xa7, 0xc8,
++      0x9a, 0x92, 0xc4, 0xde, 0xdf, 0x59, 0x6d, 0xe7, 0x95, 0x9d, 0xba, 0x57,
++      0xbc, 0x26, 0x26, 0xcf, 0xdc, 0x46, 0xf3, 0xeb, 0xee, 0x4d, 0x1f, 0x79,
++      0xe6, 0x36, 0x41, 0x5b, 0x42, 0x74, 0x33, 0xb9, 0x5d, 0x1c, 0x3d, 0x18,
++      0x4d, 0xd4, 0x69, 0x5b, 0xa0, 0xc9, 0x7a, 0x33, 0xff, 0x7a, 0xb0, 0x3f,
++      0x81, 0x68, 0xd1, 0xa5, 0x95, 0xe4, 0x5b, 0x88, 0x3a, 0x18, 0xa3, 0x1e,
++      0x4d, 0xd4, 0x35, 0x6f, 0xe3, 0x98, 0xfc, 0x2b, 0x7b, 0x30, 0x9c, 0x68,
++      0xfc, 0x2b, 0xc6, 0x11, 0x7f, 0x99, 0xcd, 0x75, 0xe2, 0x7f, 0xbd, 0x97,
++      0x38, 0xb0, 0x29, 0xbf, 0xe6, 0xd5, 0x96, 0xf8, 0x35, 0xe5, 0xb7, 0x85,
++      0x64, 0xbd, 0x4f, 0x2a, 0x37, 0xc1, 0x3c, 0xff, 0x04, 0xd6, 0xf5, 0x2b,
++      0x78, 0xd2, 0x38, 0x81, 0xb5, 0x43, 0x22, 0xcf, 0x09, 0xac, 0xe9, 0x7f,
++      0x09, 0x7b, 0xfa, 0x67, 0xa0, 0xc9, 0xd6, 0x4d, 0x07, 0x36, 0xec, 0x3c,
++      0x88, 0xed, 0x29, 0x0b, 0xdb, 0x42, 0x1e, 0xac, 0x7f, 0x58, 0xc1, 0xf2,
++      0xc0, 0x61, 0x6c, 0xd9, 0x69, 0xe1, 0xe2, 0x50, 0x27, 0x9a, 0xcd, 0x32,
++      0x14, 0x57, 0xcd, 0x6b, 0x57, 0x59, 0xae, 0x6d, 0xb8, 0x23, 0xbf, 0x2f,
++      0x79, 0x3f, 0xb1, 0x40, 0x85, 0xcf, 0x90, 0x3d, 0xc7, 0x51, 0xe5, 0xa6,
++      0x4c, 0x93, 0xd2, 0x9a, 0x7f, 0x66, 0x79, 0x7d, 0xa6, 0xa8, 0x02, 0xa5,
++      0x71, 0xec, 0x09, 0x9d, 0xc0, 0xd0, 0xd0, 0x07, 0xe5, 0x39, 0x7f, 0x99,
++      0x20, 0x77, 0x90, 0x9c, 0xc3, 0xa4, 0x4d, 0x7d, 0xd2, 0xfb, 0x40, 0x62,
++      0x77, 0x93, 0xf8, 0xe9, 0xe0, 0x49, 0x9c, 0x1c, 0xfc, 0x37, 0x2c, 0xd1,
++      0x24, 0x7f, 0xb4, 0x3a, 0x9d, 0x11, 0xcb, 0xda, 0xd5, 0x10, 0xb7, 0x6a,
++      0x8c, 0x5f, 0xb0, 0xed, 0x0a, 0x4c, 0x8f, 0xbc, 0x88, 0x6d, 0x1a, 0xdb,
++      0x4a, 0xed, 0xc7, 0x0e, 0xc6, 0x75, 0x5f, 0xe4, 0x66, 0xf8, 0x52, 0x59,
++      0xb3, 0x1a, 0xd1, 0x1d, 0xd5, 0xd0, 0x37, 0x56, 0x39, 0x8c, 0x8e, 0x7f,
++      0x55, 0xea, 0x71, 0x7d, 0xe6, 0x24, 0x7e, 0x3e, 0x68, 0xef, 0xa5, 0x6a,
++      0xfd, 0xae, 0x62, 0x75, 0x6e, 0x0b, 0xe9, 0xcd, 0xff, 0x43, 0x89, 0xc6,
++      0x4b, 0x69, 0x53, 0x25, 0xcc, 0x09, 0x6e, 0x18, 0x94, 0x1c, 0xb1, 0x15,
++      0xee, 0x3e, 0x3d, 0xbb, 0x94, 0x3c, 0xfb, 0xee, 0x05, 0xf1, 0x99, 0xd3,
++      0x68, 0x97, 0x0e, 0x45, 0x0f, 0x1a, 0x6a, 0x27, 0x8e, 0x98, 0xfa, 0xc4,
++      0xef, 0x1c, 0xc6, 0xd0, 0x77, 0x50, 0x8f, 0x55, 0x19, 0x7d, 0xe8, 0x32,
++      0xe6, 0x61, 0x5b, 0x92, 0x26, 0x52, 0x49, 0xbd, 0xb5, 0xc3, 0xd1, 0x8b,
++      0x3b, 0x02, 0xb5, 0x1b, 0xdf, 0x25, 0x97, 0xf3, 0x10, 0x53, 0x92, 0xe3,
++      0x23, 0xcc, 0x5f, 0x7b, 0xb1, 0xe1, 0xe1, 0x08, 0xd6, 0xef, 0x32, 0xd1,
++      0x93, 0x1c, 0xa1, 0x6c, 0x3f, 0x2c, 0x97, 0xbd, 0x34, 0x2d, 0xa1, 0xf8,
++      0xb5, 0x2a, 0x02, 0x51, 0xf6, 0xd9, 0xa8, 0x46, 0x02, 0x7e, 0x55, 0x61,
++      0xf4, 0x1f, 0x77, 0xa2, 0x9b, 0x65, 0xfa, 0x52, 0xb4, 0xb9, 0xa4, 0x9b,
++      0xf1, 0x72, 0x16, 0x86, 0xc7, 0x7c, 0xd8, 0x37, 0xe6, 0xc1, 0xd0, 0x98,
++      0xc6, 0xa3, 0x14, 0x0f, 0x0d, 0xc8, 0x9e, 0x14, 0x2f, 0x9e, 0xd8, 0xeb,
++      0xc6, 0xa6, 0x07, 0x3c, 0x98, 0x13, 0x99, 0x8e, 0xbd, 0x7b, 0x4b, 0xb1,
++      0x9b, 0xd7, 0xab, 0x16, 0xfa, 0xf1, 0x38, 0xaf, 0xf7, 0x3f, 0xe0, 0xe2,
++      0x3c, 0x5c, 0x8c, 0x03, 0x34, 0xec, 0xa1, 0xb1, 0x32, 0xa4, 0x06, 0x68,
++      0xf2, 0xe4, 0xac, 0x6f, 0x31, 0xc3, 0x18, 0xdd, 0xcb, 0xd8, 0xf8, 0xb0,
++      0x89, 0x04, 0xfb, 0xd9, 0x4e, 0x5d, 0xf5, 0x10, 0xd7, 0x36, 0x8c, 0x09,
++      0xc6, 0xaf, 0xc2, 0x35, 0x7d, 0x7a, 0x73, 0x93, 0x62, 0x44, 0x17, 0xd9,
++      0xfb, 0xb4, 0xe4, 0xbd, 0xad, 0x55, 0x68, 0x4c, 0xe8, 0x66, 0x13, 0x3a,
++      0x71, 0x8c, 0xe3, 0xfe, 0x7f, 0xe8, 0xb7, 0x8b, 0x1d, 0x7a, 0xef, 0xd5,
++      0xea, 0x41, 0xec, 0xc8, 0x1c, 0x22, 0x57, 0x07, 0xc2, 0x7b, 0x0e, 0x92,
++      0xbf, 0x1d, 0x21, 0xfe, 0xbc, 0x6e, 0xf9, 0x0c, 0x15, 0xd7, 0xdf, 0x6f,
++      0x84, 0xdf, 0x53, 0x02, 0x1b, 0x7f, 0x45, 0x1d, 0x7c, 0x7e, 0xaf, 0x8a,
++      0xeb, 0x76, 0x2c, 0x46, 0x3a, 0x14, 0xc5, 0xf6, 0x45, 0x2a, 0xae, 0x7d,
++      0xf8, 0x20, 0x71, 0x7f, 0xc2, 0xe6, 0xc9, 0xd9, 0xf4, 0x7d, 0x08, 0xf6,
++      0xc9, 0x9a, 0xbc, 0x9b, 0xf1, 0xbb, 0x1c, 0xc7, 0xfb, 0x3b, 0xe9, 0xb7,
++      0xe5, 0x38, 0x3a, 0x74, 0x90, 0xf6, 0x58, 0x8e, 0x23, 0xfd, 0xc6, 0xc4,
++      0x4f, 0x1d, 0xe5, 0x78, 0x82, 0xe7, 0x3b, 0x78, 0xbe, 0x70, 0xc0, 0xe8,
++      0xef, 0x50, 0xcb, 0xb1, 0x60, 0x4f, 0x03, 0xfa, 0x93, 0x62, 0x9b, 0x1a,
++      0x36, 0x8e, 0xd5, 0xe7, 0x75, 0x2f, 0x3a, 0xf7, 0xe2, 0x4e, 0xea, 0xea,
++      0x8e, 0x1d, 0x9d, 0xec, 0xcf, 0x47, 0x9d, 0x1f, 0xc4, 0x43, 0xcc, 0xeb,
++      0xb6, 0x25, 0x7d, 0x38, 0x9d, 0x32, 0xfc, 0x5f, 0x52, 0x0c, 0xb3, 0x44,
++      0x09, 0x68, 0xc7, 0xe1, 0xc3, 0xc9, 0x4c, 0x29, 0xba, 0x07, 0x66, 0xe1,
++      0xa7, 0xb4, 0xcf, 0x07, 0x1f, 0x90, 0xfe, 0x26, 0x18, 0x1f, 0x66, 0xe3,
++      0x89, 0x11, 0x93, 0x6d, 0xcb, 0x3c, 0x49, 0xcc, 0xe9, 0x81, 0x2b, 0x25,
++      0xbe, 0x11, 0xdd, 0x41, 0xb3, 0x20, 0x26, 0x1e, 0x46, 0xa6, 0x5f, 0xef,
++      0xbd, 0x41, 0x15, 0x5e, 0xad, 0x52, 0x97, 0x0e, 0x4c, 0x6a, 0x7a, 0xbc,
++      0x4a, 0x8d, 0xf7, 0x33, 0x7f, 0x8d, 0x57, 0xab, 0x87, 0xf1, 0x44, 0xbf,
++      0x13, 0xf3, 0x16, 0xaa, 0xbc, 0x1e, 0x3f, 0xc3, 0xd8, 0x16, 0x9f, 0xa3,
++      0x9a, 0xd8, 0x6d, 0xcb, 0x8a, 0x78, 0x11, 0xb9, 0x7d, 0xe5, 0xc2, 0x5a,
++      0xc6, 0x2f, 0x87, 0xd8, 0x5e, 0xac, 0x5c, 0x75, 0x52, 0xef, 0x27, 0x31,
++      0x42, 0xbb, 0x7e, 0x94, 0xc7, 0x81, 0x41, 0xab, 0x73, 0x39, 0x39, 0xf7,
++      0xc5, 0x01, 0xab, 0xf3, 0x06, 0xd3, 0xf0, 0x15, 0xa9, 0x81, 0xe8, 0xdd,
++      0x38, 0x89, 0xfd, 0x23, 0x52, 0x06, 0x6e, 0x6f, 0x84, 0x79, 0x75, 0xd2,
++      0xea, 0xdc, 0x61, 0x5e, 0x8c, 0x06, 0x3b, 0x37, 0xfe, 0x55, 0x79, 0x0e,
++      0x33, 0xc5, 0x8f, 0x64, 0x0d, 0x64, 0x12, 0xbf, 0x62, 0x3b, 0xef, 0x0d,
++      0x56, 0x62, 0x5a, 0xb5, 0xf8, 0xc1, 0x09, 0xbc, 0xdd, 0xff, 0x22, 0x4e,
++      0xf7, 0x5b, 0x58, 0x10, 0xb2, 0xe0, 0x0c, 0xd5, 0x99, 0x4d, 0xea, 0x65,
++      0xc4, 0x08, 0x05, 0xd7, 0xcc, 0x7d, 0x09, 0xef, 0xd0, 0xff, 0xaf, 0x9d,
++      0x6b, 0xd9, 0xb2, 0xf4, 0x61, 0xa1, 0xb5, 0xbd, 0x46, 0xfc, 0xc6, 0xb4,
++      0xf7, 0xf5, 0x7c, 0x72, 0x1e, 0x5c, 0xd8, 0xb7, 0x26, 0xb9, 0xf0, 0x49,
++      0x0c, 0x0f, 0x1a, 0xd1, 0x75, 0x05, 0x39, 0xfb, 0x4f, 0x52, 0x07, 0x16,
++      0x76, 0x98, 0x47, 0x1f, 0xae, 0xc2, 0xbc, 0x33, 0xcc, 0x1a, 0xaf, 0x98,
++      0x43, 0xdb, 0x59, 0xb0, 0x30, 0x60, 0x2e, 0x53, 0xdf, 0xa4, 0x9f, 0x9e,
++      0xc4, 0xbe, 0xa1, 0x02, 0x5e, 0xfb, 0xd0, 0x44, 0x3f, 0xcf, 0xed, 0x65,
++      0xf7, 0xa2, 0x31, 0x75, 0xc8, 0x5e, 0x7f, 0x38, 0x40, 0x7c, 0xcc, 0x3d,
++      0xd3, 0xd4, 0x30, 0x92, 0x69, 0x22, 0x36, 0x44, 0xf1, 0xcf, 0x99, 0x08,
++      0xf1, 0x21, 0x4c, 0x7c, 0x68, 0x20, 0x3e, 0x98, 0xc4, 0x87, 0x7a, 0xe2,
++      0x43, 0xd0, 0x7e, 0xd6, 0x2f, 0x6b, 0xe6, 0x43, 0xa3, 0x2f, 0xa2, 0x68,
++      0xe0, 0x04, 0x5c, 0xf4, 0x81, 0xe3, 0xa6, 0x45, 0x7e, 0x52, 0xa7, 0xad,
++      0xc1, 0xc5, 0x4a, 0x54, 0xf3, 0x62, 0x28, 0x73, 0x02, 0x25, 0x03, 0x1a,
++      0xc7, 0x22, 0xfb, 0x33, 0x6a, 0xc3, 0xbd, 0xc4, 0xea, 0x5f, 0x1b, 0x75,
++      0xbd, 0x5e, 0xd4, 0xed, 0xae, 0x81, 0xd1, 0xbf, 0x50, 0x9d, 0xab, 0x44,
++      0xbf, 0xe0, 0xe5, 0x38, 0xab, 0x31, 0xfb, 0x01, 0x0d, 0x73, 0x78, 0xfc,
++      0x53, 0xaa, 0x76, 0xe2, 0x75, 0x07, 0xbc, 0x33, 0x48, 0x77, 0x66, 0x92,
++      0x09, 0x90, 0xd5, 0x7a, 0x7d, 0xb8, 0xe4, 0xc0, 0x49, 0x55, 0x41, 0xf6,
++      0x0b, 0x12, 0xf3, 0xea, 0x82, 0x3d, 0xaa, 0x2a, 0x6b, 0x48, 0xc4, 0x70,
++      0x1e, 0x2a, 0x22, 0x64, 0x11, 0xb3, 0x98, 0x5f, 0x58, 0x6b, 0xcc, 0x12,
++      0x6c, 0xae, 0x57, 0x65, 0x6f, 0xc8, 0x21, 0x89, 0x51, 0x33, 0x18, 0x23,
++      0x4a, 0x93, 0xf1, 0xdb, 0x66, 0xc0, 0x83, 0x92, 0xa4, 0x65, 0x3d, 0x16,
++      0xd2, 0xe0, 0x89, 0x04, 0xa2, 0x1b, 0x98, 0x46, 0x7e, 0x61, 0x5e, 0x18,
++      0xd7, 0x64, 0x0e, 0x60, 0x80, 0xe3, 0x5b, 0x9e, 0x29, 0xbc, 0xe3, 0xf9,
++      0xc9, 0x7f, 0xe7, 0xde, 0x15, 0xbd, 0x64, 0xf7, 0x0c, 0x18, 0xda, 0x5d,
++      0x6a, 0xbc, 0x92, 0x1c, 0xfc, 0x00, 0xe3, 0x9e, 0x32, 0x79, 0xa3, 0x82,
++      0xd6, 0x81, 0x38, 0xa6, 0x85, 0x7e, 0xa0, 0xc4, 0xaa, 0x75, 0xbf, 0x5f,
++      0xa9, 0xc6, 0x8d, 0x0f, 0x50, 0xd7, 0x0b, 0x26, 0x68, 0x2b, 0x3e, 0x7c,
++      0x67, 0x54, 0x74, 0x5b, 0x3b, 0xb4, 0x83, 0xe3, 0x98, 0x98, 0x7b, 0x40,
++      0x70, 0xf2, 0xa0, 0x1b, 0x8e, 0x83, 0xd3, 0x99, 0x9b, 0xd6, 0xcf, 0xbd,
++      0xa4, 0xe3, 0xdf, 0x54, 0xd1, 0x8b, 0xf0, 0x6b, 0xbd, 0x3f, 0xae, 0x18,
++      0xda, 0x2f, 0x95, 0x03, 0xe4, 0x6c, 0x5e, 0x3c, 0x96, 0x39, 0x4c, 0x5d,
++      0xee, 0xcf, 0xe7, 0x4b, 0xab, 0x90, 0xe8, 0x93, 0x7d, 0x81, 0x27, 0x30,
++      0x7b, 0x40, 0x6f, 0xd9, 0xaa, 0x18, 0xc1, 0x6b, 0x95, 0x13, 0x98, 0x39,
++      0x10, 0xe4, 0x5c, 0x6a, 0x58, 0x96, 0x2c, 0xe0, 0xa7, 0x60, 0xf0, 0x2a,
++      0x62, 0xb0, 0xb5, 0xf8, 0xa7, 0x66, 0x9c, 0x39, 0x8e, 0x6e, 0x3a, 0x15,
++      0xbd, 0x75, 0xae, 0x22, 0xfb, 0x80, 0x8c, 0x33, 0x6d, 0xac, 0xe3, 0x19,
++      0xa8, 0xc7, 0x57, 0x39, 0xe6, 0x66, 0xce, 0xdb, 0x8b, 0x0b, 0x2d, 0x2c,
++      0x5a, 0xa8, 0xef, 0x2e, 0x71, 0x44, 0xef, 0xaa, 0x42, 0xb6, 0xa3, 0x86,
++      0x76, 0x73, 0xc7, 0x02, 0x3d, 0xfc, 0x03, 0xe2, 0x2e, 0x71, 0x1a, 0xdd,
++      0x8c, 0x3b, 0x6b, 0x18, 0x8b, 0x4a, 0x23, 0x7a, 0x2f, 0x73, 0xd4, 0xf7,
++      0x6e, 0x75, 0x44, 0x43, 0xf2, 0x1e, 0xd1, 0xdf, 0x63, 0x31, 0xdc, 0xa1,
++      0x0a, 0xe2, 0xa0, 0x9e, 0x7d, 0x11, 0xfa, 0xee, 0xaf, 0x92, 0x93, 0xfe,
++      0x98, 0xfc, 0xae, 0xe6, 0xd2, 0x43, 0xc4, 0xa8, 0x11, 0x3c, 0x98, 0x39,
++      0x88, 0xdd, 0x99, 0x34, 0x76, 0x66, 0xb6, 0x29, 0x43, 0xf6, 0xb3, 0x45,
++      0x45, 0xde, 0x99, 0x8b, 0x56, 0x28, 0x5f, 0x46, 0x79, 0xe8, 0x5b, 0xd6,
++      0x50, 0x95, 0x8a, 0xca, 0x50, 0x10, 0xd7, 0x24, 0xe3, 0x70, 0x44, 0xde,
++      0xb5, 0xe4, 0x7d, 0xed, 0xf5, 0xe3, 0x06, 0xae, 0x4e, 0x96, 0x22, 0xb6,
++      0xc7, 0xb2, 0x7a, 0x1b, 0x9c, 0x58, 0x3b, 0x5e, 0x8f, 0x65, 0x03, 0x0f,
++      0x59, 0x73, 0x18, 0x73, 0x3e, 0xbc, 0xdc, 0x83, 0x5b, 0xf7, 0x78, 0xd0,
++      0x96, 0x8c, 0xc2, 0x17, 0x29, 0xe3, 0xef, 0x80, 0xb9, 0x04, 0xc6, 0xc4,
++      0x04, 0x8c, 0xde, 0xab, 0x1c, 0x81, 0xfd, 0x61, 0xd5, 0x83, 0xbf, 0x21,
++      0x8e, 0x2f, 0x27, 0xee, 0xc4, 0xc6, 0x2d, 0x54, 0x46, 0xbc, 0xb8, 0x8d,
++      0xf5, 0xaf, 0xe3, 0xdc, 0xbf, 0xb3, 0x68, 0x3f, 0xb1, 0x40, 0xf6, 0x42,
++      0x6a, 0xd8, 0x30, 0xee, 0xa6, 0xae, 0xdc, 0x88, 0xed, 0xab, 0xc6, 0xd5,
++      0x0f, 0xf8, 0x71, 0xeb, 0xb8, 0x07, 0x8d, 0x49, 0x6b, 0xf1, 0x01, 0x33,
++      0xbe, 0x52, 0x83, 0x81, 0xb6, 0x71, 0x2f, 0xbe, 0x92, 0xd4, 0x7d, 0xd7,
++      0x32, 0xe7, 0x1f, 0x31, 0x83, 0xf8, 0x5f, 0xe3, 0x3e, 0xdc, 0x94, 0x3c,
++      0x2a, 0x79, 0xe4, 0x12, 0x27, 0x63, 0xcf, 0xbd, 0xe3, 0xb3, 0xb0, 0x32,
++      0xa9, 0x9f, 0x99, 0x20, 0xb7, 0xeb, 0xdc, 0x67, 0xe2, 0xae, 0x71, 0x15,
++      0xad, 0x6c, 0xe7, 0xc6, 0xe4, 0x6c, 0x74, 0xec, 0x6b, 0xa0, 0x0c, 0x0b,
++      0xb1, 0x7c, 0xc0, 0x09, 0x93, 0x2c, 0x1e, 0x5f, 0x04, 0x5a, 0x06, 0x26,
++      0x98, 0xc7, 0xdd, 0x87, 0xed, 0x7d, 0x26, 0x6e, 0x1f, 0x97, 0xf3, 0x83,
++      0xf6, 0x3b, 0xae, 0xef, 0x3d, 0xbc, 0x10, 0x9f, 0x1f, 0x50, 0x89, 0x03,
++      0xc5, 0x18, 0x5a, 0xa9, 0xe0, 0x2b, 0xbc, 0xbe, 0x35, 0x25, 0x7b, 0x90,
++      0x81, 0xd0, 0x8e, 0xc0, 0xfe, 0x2a, 0x72, 0x86, 0x45, 0x0f, 0xe7, 0xae,
++      0x3f, 0x48, 0x9c, 0x2f, 0x21, 0xce, 0x97, 0x91, 0xc3, 0x5e, 0x35, 0x7c,
++      0x10, 0xf7, 0x13, 0x97, 0x0f, 0x0d, 0x74, 0x32, 0xee, 0x94, 0xe3, 0x71,
++      0xc6, 0x81, 0x24, 0xcf, 0x4f, 0xec, 0x30, 0x3a, 0x4a, 0x88, 0xd3, 0x3f,
++      0x20, 0xfe, 0xf6, 0x12, 0x33, 0xee, 0x48, 0x32, 0xdc, 0xef, 0x60, 0x0e,
++      0x70, 0x69, 0x74, 0xbe, 0x87, 0x39, 0xd6, 0xb5, 0x4a, 0xc0, 0xf7, 0x26,
++      0xca, 0xe1, 0x78, 0xb8, 0x1a, 0x8d, 0x0f, 0x48, 0x19, 0xc1, 0x2f, 0x15,
++      0xea, 0x5e, 0x27, 0x75, 0x7e, 0x18, 0x56, 0xbf, 0x83, 0xe3, 0xad, 0x35,
++      0xc9, 0xc0, 0xf1, 0x9a, 0xa9, 0x6b, 0xff, 0x4c, 0xac, 0x7d, 0x9f, 0x98,
++      0xea, 0x9f, 0xd1, 0x80, 0x26, 0xc3, 0xe4, 0x71, 0x18, 0x27, 0xfb, 0x0d,
++      0x53, 0xf6, 0xe4, 0xbd, 0x4e, 0x9e, 0x37, 0x39, 0x83, 0x31, 0xd3, 0x10,
++      0x3f, 0x1c, 0xe1, 0x78, 0x54, 0xc9, 0x4b, 0xe0, 0x18, 0x03, 0xde, 0x7e,
++      0x78, 0x31, 0xc7, 0x25, 0xb1, 0x54, 0xe2, 0xdd, 0x08, 0x65, 0x5d, 0x8c,
++      0x15, 0xd4, 0x47, 0x53, 0x52, 0x45, 0x7a, 0x5f, 0x04, 0xb7, 0xef, 0xca,
++      0xc5, 0xe1, 0x8d, 0xa1, 0xf8, 0x0d, 0x8c, 0xc3, 0xe1, 0x52, 0xc6, 0x61,
++      0x57, 0x44, 0x64, 0x73, 0x62, 0x98, 0x71, 0x7b, 0x73, 0x2a, 0x8c, 0x66,
++      0xce, 0xe1, 0x44, 0x9a, 0xfd, 0x26, 0x67, 0xe1, 0x78, 0xda, 0xc3, 0x98,
++      0xa5, 0xf1, 0x20, 0xaa, 0x8d, 0x4c, 0xe7, 0xe1, 0xe7, 0x71, 0x31, 0x0f,
++      0xc3, 0xbe, 0xb6, 0x26, 0xa9, 0x20, 0xde, 0xa2, 0xd8, 0x7c, 0xfe, 0x78,
++      0x5a, 0xb0, 0x59, 0xd6, 0x32, 0xef, 0xae, 0x94, 0x3d, 0xa8, 0xfd, 0xa9,
++      0x97, 0x50, 0x49, 0x7c, 0xaa, 0xc8, 0xe3, 0xd0, 0xcf, 0x42, 0x82, 0xbb,
++      0xb5, 0xc4, 0x5d, 0xd9, 0x4f, 0x64, 0x59, 0xab, 0x02, 0x53, 0xf1, 0xe8,
++      0xff, 0xfb, 0x30, 0x6a, 0xef, 0xab, 0x15, 0x4c, 0x22, 0xfe, 0xa5, 0x88,
++      0x7f, 0x1c, 0x43, 0xd7, 0x95, 0xc4, 0x40, 0xca, 0xf4, 0x8f, 0x29, 0x62,
++      0x20, 0x71, 0xfa, 0x20, 0x71, 0xfa, 0xdb, 0xc4, 0xe9, 0x6f, 0x11, 0xa7,
++      0x1f, 0x27, 0x26, 0xe4, 0xd6, 0xf4, 0x9a, 0xe5, 0xb9, 0x0a, 0xe7, 0xe3,
++      0x1d, 0x7b, 0x6d, 0xb1, 0x86, 0xba, 0x9a, 0x3d, 0xa0, 0x60, 0x8e, 0xa1,
++      0xef, 0x17, 0xbb, 0xff, 0x31, 0xe7, 0xc9, 0x3f, 0x2d, 0xb7, 0xe7, 0xb7,
++      0x29, 0xd9, 0x03, 0x77, 0xb2, 0x4e, 0xeb, 0x85, 0xfd, 0x0d, 0x01, 0x53,
++      0xb8, 0x68, 0x51, 0x72, 0x0d, 0x1c, 0xc9, 0xba, 0xfd, 0xc7, 0xe4, 0xf9,
++      0xed, 0x74, 0xc9, 0xeb, 0xd7, 0xc8, 0x1e, 0xed, 0xfd, 0xb2, 0x37, 0x6c,
++      0x19, 0xef, 0xb9, 0x92, 0x75, 0xe6, 0x9b, 0xb0, 0xb1, 0xcd, 0x3f, 0x69,
++      0xdf, 0xab, 0x7d, 0xef, 0x7e, 0xea, 0x2b, 0xcb, 0x36, 0xd3, 0x29, 0xd9,
++      0x17, 0x3b, 0x0b, 0x8f, 0x66, 0xe4, 0x77, 0x5d, 0x6b, 0x42, 0xdd, 0x8f,
++      0x58, 0x8d, 0xf0, 0xf1, 0x30, 0xae, 0x4f, 0x7a, 0x68, 0x07, 0x71, 0x54,
++      0xd0, 0xb7, 0xbe, 0x36, 0xde, 0x40, 0x5f, 0x7b, 0xc8, 0xd2, 0x22, 0x81,
++      0xd6, 0x71, 0x72, 0x9e, 0xf5, 0xe3, 0x8b, 0xb1, 0x74, 0xc0, 0xb2, 0x3c,
++      0x97, 0x19, 0xe1, 0x0d, 0x8a, 0x1f, 0x2e, 0xfa, 0xa0, 0x83, 0x7e, 0xb5,
++      0x6e, 0x4f, 0x40, 0x7b, 0x93, 0x78, 0xda, 0xde, 0x70, 0x80, 0xf6, 0x61,
++      0x9c, 0x69, 0x26, 0x96, 0x3a, 0x23, 0x01, 0xe6, 0x89, 0x1e, 0xda, 0xbe,
++      0x17, 0x67, 0x12, 0xe2, 0x5f, 0x7a, 0xc7, 0x3f, 0x33, 0x37, 0xe9, 0xa0,
++      0x6f, 0xfc, 0x32, 0x31, 0x8b, 0x3e, 0xe0, 0xc6, 0xdb, 0x09, 0x83, 0xfe,
++      0xe6, 0xc1, 0x3b, 0x89, 0x7a, 0xf6, 0x15, 0x64, 0x19, 0x3f, 0xee, 0x1c,
++      0x0f, 0xd3, 0xcf, 0xae, 0xe4, 0x21, 0xef, 0x53, 0xd7, 0xc6, 0xbf, 0xa3,
++      0xd4, 0xf6, 0xcf, 0x56, 0xab, 0x10, 0xad, 0xd6, 0xf0, 0xf5, 0xf1, 0xcf,
++      0xe2, 0x3f, 0x18, 0xb7, 0xd7, 0x26, 0xc1, 0x39, 0x44, 0x88, 0x3c, 0x70,
++      0x62, 0x9f, 0x3c, 0x4b, 0x44, 0x5d, 0x74, 0xae, 0x43, 0x67, 0x6e, 0xab,
++      0x67, 0x4f, 0x3b, 0x9c, 0xec, 0x93, 0xac, 0x98, 0x65, 0x7f, 0xd9, 0x5f,
++      0x8a, 0xbb, 0xf6, 0x1c, 0xa0, 0x8f, 0x14, 0x61, 0xc1, 0xfd, 0x6e, 0x7c,
++      0x7d, 0xdf, 0x08, 0xb9, 0x83, 0x8a, 0x99, 0xcc, 0x95, 0x86, 0x48, 0x14,
++      0x66, 0x0e, 0x47, 0x70, 0xdb, 0xae, 0x11, 0x0c, 0xe4, 0x79, 0x5e, 0x28,
++      0x14, 0xff, 0x9f, 0x2a, 0x0e, 0x90, 0x47, 0x04, 0xda, 0x3f, 0x43, 0x1b,
++      0xab, 0x88, 0x04, 0xe2, 0x32, 0xee, 0x16, 0xda, 0x58, 0x0f, 0xe7, 0x33,
++      0xcd, 0x71, 0x24, 0x68, 0x63, 0x8f, 0x51, 0xfe, 0xed, 0xb4, 0xb1, 0x38,
++      0x6d, 0x2c, 0x4e, 0x7b, 0x8a, 0xd3, 0xc6, 0xe4, 0x9d, 0xfd, 0x38, 0x6d,
++      0x2c, 0x4e, 0x1b, 0x8b, 0xa7, 0x17, 0x63, 0x94, 0x4c, 0x63, 0xcb, 0x48,
++      0x03, 0x71, 0x4c, 0xb1, 0xa3, 0x52, 0xf6, 0x86, 0xcf, 0x92, 0xb3, 0x5f,
++      0xc5, 0x43, 0x41, 0x33, 0x7d, 0xb2, 0x77, 0x68, 0x84, 0x9c, 0xc7, 0x8d,
++      0xdf, 0x64, 0x84, 0xe3, 0x37, 0x30, 0x8f, 0x3d, 0x4c, 0x9e, 0xaf, 0xe2,
++      0x49, 0x53, 0xf2, 0x60, 0x93, 0xe7, 0x8c, 0x35, 0x29, 0xe1, 0x6b, 0x87,
++      0x71, 0x47, 0x3f, 0x70, 0x2d, 0x79, 0x61, 0x35, 0x79, 0xc9, 0xde, 0x05,
++      0xfc, 0xfd, 0xf0, 0x01, 0xda, 0xbc, 0xf8, 0x63, 0x6e, 0xaf, 0xeb, 0xf1,
++      0xfe, 0x5a, 0xdf, 0xd5, 0xf4, 0xc1, 0x7b, 0x59, 0xd7, 0xf9, 0xb0, 0xd4,
++      0x39, 0xc0, 0xb6, 0xf5, 0xf0, 0x6f, 0x38, 0xff, 0xad, 0xf7, 0x57, 0xe3,
++      0xed, 0x5d, 0x7a, 0xf8, 0x7d, 0x62, 0x5e, 0xb5, 0xc3, 0x5a, 0xfc, 0x99,
++      0x50, 0x60, 0xe3, 0x67, 0xd4, 0x1c, 0xdf, 0x6b, 0xd9, 0xe1, 0xc4, 0xfe,
++      0xd0, 0x62, 0x78, 0x16, 0x14, 0x38, 0x1f, 0x6d, 0xa9, 0x5a, 0x38, 0x96,
++      0x1e, 0x3e, 0x4d, 0xae, 0x92, 0x64, 0xfb, 0xa3, 0xe9, 0x23, 0xc4, 0x90,
++      0xfb, 0xf0, 0x02, 0xf3, 0xf3, 0x91, 0x4f, 0xbf, 0x4e, 0xee, 0xe8, 0xc6,
++      0x18, 0x39, 0xe0, 0x81, 0xfe, 0xe8, 0xe7, 0x9c, 0xc4, 0x7d, 0xcf, 0x82,
++      0x72, 0xa4, 0x87, 0x84, 0x2b, 0x96, 0xe3, 0xd9, 0x7e, 0x43, 0xbb, 0x56,
++      0xc9, 0xf1, 0xc2, 0x2d, 0x3c, 0x7f, 0xb3, 0xdf, 0x38, 0x33, 0x8c, 0xc0,
++      0xc4, 0x69, 0x72, 0xc3, 0xf7, 0x87, 0x24, 0x86, 0x1d, 0xa4, 0x8f, 0xfb,
++      0x11, 0x4e, 0x6a, 0x38, 0x34, 0x66, 0x60, 0x7e, 0xd2, 0x8b, 0x47, 0xc6,
++      0x82, 0xf8, 0x0c, 0x7d, 0x37, 0x43, 0x7e, 0xf8, 0xe9, 0xa4, 0xf8, 0xe2,
++      0x2c, 0x8c, 0x8f, 0xcd, 0xb2, 0xf7, 0x54, 0x7a, 0x8c, 0x5f, 0xc0, 0x53,
++      0x2d, 0x3e, 0x49, 0x6e, 0x9d, 0xd2, 0x7b, 0x63, 0x1c, 0x4f, 0xcc, 0xab,
++      0xef, 0x8f, 0x41, 0x1f, 0x02, 0xae, 0xf8, 0x70, 0xe8, 0x8b, 0x12, 0x1f,
++      0xc5, 0x1f, 0x35, 0x8c, 0x93, 0xef, 0x14, 0x13, 0x53, 0x4b, 0x23, 0xb5,
++      0xef, 0xbd, 0xac, 0xe8, 0xd9, 0xa7, 0x55, 0xcb, 0x7a, 0x69, 0xa1, 0x06,
++      0xdf, 0x3e, 0x8d, 0xdc, 0xc3, 0x64, 0xec, 0x16, 0x3f, 0xd5, 0x30, 0xe3,
++      0x81, 0x6a, 0x4c, 0x7b, 0x20, 0x89, 0xbf, 0xad, 0x8e, 0x7f, 0x6e, 0x3a,
++      0xe3, 0xfc, 0x74, 0xe2, 0x7a, 0x65, 0xf2, 0xd8, 0x0c, 0x37, 0xf9, 0xf2,
++      0x84, 0x5a, 0xd7, 0xba, 0x1f, 0xfa, 0xfe, 0x93, 0x8a, 0xee, 0x7b, 0x8c,
++      0xb1, 0xc1, 0x45, 0x1b, 0x75, 0x8c, 0x6b, 0xf4, 0xdd, 0xba, 0x43, 0xd3,
++      0x60, 0xc4, 0x2f, 0x57, 0x5d, 0x16, 0x6c, 0x79, 0xae, 0xa8, 0xcc, 0xe5,
++      0x45, 0x82, 0x3b, 0x12, 0x17, 0x1c, 0xb2, 0xff, 0x13, 0xed, 0xf4, 0x97,
++      0x15, 0x76, 0x2c, 0x3a, 0x60, 0xef, 0x8f, 0xdb, 0x30, 0x1e, 0xa7, 0x8f,
++      0x2c, 0x46, 0xd9, 0x80, 0x07, 0x5f, 0xb3, 0xe3, 0xd0, 0x43, 0x56, 0x15,
++      0xfd, 0xe5, 0xf6, 0x3d, 0x81, 0xf6, 0xab, 0xe9, 0x2f, 0xb5, 0x97, 0x49,
++      0x0c, 0x63, 0xdc, 0x4e, 0x19, 0xe6, 0x30, 0xb1, 0xe5, 0xa1, 0x06, 0x63,
++      0xe2, 0x75, 0xe4, 0x7c, 0x66, 0x6b, 0x5f, 0x35, 0xfe, 0xe1, 0xfe, 0xfd,
++      0xf6, 0x5a, 0xc8, 0x6d, 0x3c, 0x4f, 0xf6, 0xf9, 0x6c, 0xff, 0x88, 0xf1,
++      0xf7, 0x9d, 0x8c, 0x79, 0x31, 0xfa, 0xd1, 0x96, 0x3e, 0x6b, 0xf1, 0xf7,
++      0x17, 0xc6, 0x57, 0x56, 0x20, 0xc8, 0x98, 0xe4, 0x46, 0x6f, 0x9f, 0xde,
++      0xdf, 0xca, 0x18, 0x74, 0x62, 0xa1, 0x49, 0x59, 0x3c, 0xd8, 0xd1, 0x27,
++      0x98, 0x7a, 0xf4, 0xa6, 0x6a, 0xc4, 0xff, 0xa7, 0xc6, 0xf1, 0x7d, 0xcd,
++      0x7e, 0xf6, 0x37, 0x0b, 0x6b, 0xf7, 0x5d, 0x46, 0x99, 0xeb, 0xe9, 0x83,
++      0xcc, 0xab, 0x99, 0xef, 0xac, 0xde, 0x25, 0x7e, 0x81, 0x46, 0xc9, 0xd3,
++      0x3a, 0xcd, 0x80, 0xf9, 0x06, 0x7d, 0xa8, 0x88, 0x5c, 0xe7, 0x41, 0x62,
++      0x59, 0x31, 0x21, 0xb3, 0xcc, 0x08, 0x63, 0x21, 0x6d, 0x54, 0xde, 0xe1,
++      0x98, 0x46, 0x5e, 0x37, 0x9f, 0xf3, 0x51, 0x92, 0xf1, 0x00, 0xe4, 0x10,
++      0x20, 0x3e, 0x61, 0x94, 0x20, 0x38, 0xea, 0xe7, 0x71, 0x31, 0x0f, 0x2a,
++      0x22, 0xa3, 0xa2, 0x66, 0x94, 0x75, 0x87, 0x47, 0x6c, 0x5b, 0xfc, 0x07,
++      0xce, 0x7b, 0x82, 0xb6, 0x7e, 0x23, 0xb1, 0x7e, 0x62, 0x27, 0xd0, 0xfb,
++      0x70, 0xce, 0xb6, 0x53, 0x6c, 0xbf, 0x85, 0x98, 0xf7, 0x1e, 0x6d, 0xb6,
++      0x87, 0xf3, 0xbd, 0x63, 0xd0, 0x08, 0xd6, 0xa9, 0x01, 0x6d, 0x9c, 0xf3,
++      0xdc, 0x35, 0xa2, 0xa2, 0xaf, 0x7f, 0x31, 0x86, 0x99, 0x07, 0x75, 0x0f,
++      0x89, 0x8f, 0x48, 0x99, 0xc3, 0xe8, 0xa4, 0x8f, 0xfc, 0x6a, 0xa1, 0x82,
++      0xd8, 0x17, 0xe4, 0x1d, 0x51, 0x27, 0xf3, 0xfd, 0xfb, 0xb0, 0x36, 0x71,
++      0xc4, 0x2a, 0x37, 0xf4, 0xde, 0x21, 0x95, 0x79, 0x16, 0x6d, 0xb3, 0x8b,
++      0xf9, 0xc9, 0x12, 0xe6, 0x27, 0xdd, 0x79, 0xbb, 0x3c, 0x4e, 0x3b, 0xec,
++      0x63, 0x1c, 0x7b, 0x7d, 0x28, 0x17, 0xf7, 0x7e, 0xbc, 0xc3, 0x8f, 0xf9,
++      0x97, 0x97, 0xe3, 0x99, 0x87, 0x73, 0xb2, 0xed, 0xa4, 0x4d, 0x3e, 0x4d,
++      0x3d, 0xdf, 0x4a, 0xbd, 0xbe, 0x92, 0x12, 0x8c, 0x0a, 0xe2, 0x59, 0xf2,
++      0xe8, 0xf5, 0xe4, 0x02, 0x2f, 0xa5, 0x72, 0x36, 0xf9, 0xf5, 0xf1, 0x2b,
++      0xab, 0x72, 0xf1, 0xc1, 0x0b, 0xf5, 0x01, 0x79, 0x27, 0xcf, 0xb2, 0x96,
++      0x98, 0xd9, 0x76, 0xf2, 0x1a, 0xb6, 0x1d, 0x21, 0x37, 0x72, 0x62, 0x66,
++      0x32, 0x82, 0xa5, 0xa9, 0xda, 0xe6, 0xb9, 0xb2, 0x89, 0x63, 0x66, 0x8e,
++      0x03, 0xba, 0x92, 0xf2, 0xcd, 0x0f, 0x0d, 0x65, 0xcc, 0x9d, 0xfe, 0x26,
++      0xff, 0x9d, 0x91, 0x1b, 0xff, 0x0c, 0xee, 0xb8, 0x82, 0x32, 0xa5, 0xc8,
++      0x1d, 0x27, 0xf3, 0xdf, 0x19, 0xb9, 0xc1, 0xfe, 0xce, 0x88, 0x1b, 0xd3,
++      0xc6, 0x9d, 0xce, 0x2f, 0xa5, 0x3c, 0x98, 0x31, 0x7e, 0x96, 0x83, 0xba,
++      0x8b, 0x22, 0x4d, 0x78, 0x2a, 0xa1, 0x60, 0xba, 0xf1, 0xbf, 0xf1, 0xb2,
++      0xbd, 0x26, 0x50, 0x8d, 0x99, 0x0f, 0xc8, 0x7a, 0x42, 0x54, 0xde, 0x89,
++      0x69, 0x7e, 0x82, 0xe7, 0x25, 0xc4, 0xd3, 0x8a, 0x07, 0x14, 0x3c, 0x1d,
++      0xf0, 0xa2, 0x98, 0xbf, 0x7d, 0xe4, 0x9a, 0xce, 0x85, 0xcb, 0xad, 0xcd,
++      0xab, 0xc4, 0xbe, 0x39, 0x87, 0xfb, 0xa6, 0x55, 0x0a, 0x06, 0xee, 0x35,
++      0x65, 0xdd, 0xd2, 0x40, 0x4f, 0xa2, 0x9a, 0xfc, 0xba, 0xb6, 0xbd, 0x09,
++      0xb5, 0xe6, 0x2f, 0x1c, 0xd5, 0x28, 0xda, 0x77, 0x63, 0x95, 0xac, 0xd9,
++      0x7f, 0x9b, 0x73, 0xd6, 0x4d, 0xec, 0xea, 0x4a, 0xe5, 0xe2, 0x67, 0x53,
++      0xfa, 0x17, 0x9a, 0xe8, 0xa5, 0x9b, 0xfc, 0x44, 0x4d, 0x9e, 0xb2, 0xcb,
++      0x94, 0x45, 0x0e, 0x11, 0x7f, 0x66, 0xe1, 0x10, 0xf3, 0x1a, 0x89, 0xa5,
++      0x65, 0x3c, 0xca, 0xc9, 0x1b, 0x7f, 0xc9, 0x58, 0x7a, 0x67, 0x28, 0x1b,
++      0x94, 0x2f, 0xd0, 0x54, 0x91, 0x8b, 0xd3, 0x07, 0xb0, 0x2f, 0xa4, 0xb7,
++      0xac, 0x76, 0x44, 0x9f, 0x61, 0x0e, 0x16, 0x5e, 0xcc, 0x9c, 0x7c, 0x79,
++      0x60, 0x04, 0x5b, 0xc9, 0x03, 0xb7, 0x30, 0x17, 0x6f, 0xa5, 0x6d, 0xb6,
++      0xef, 0x62, 0x6c, 0x73, 0x9c, 0xcb, 0xc5, 0xb5, 0x50, 0x7c, 0x35, 0x39,
++      0x40, 0x87, 0x47, 0x15, 0x7b, 0x15, 0xdf, 0x09, 0xb4, 0xbe, 0x41, 0x8c,
++      0xae, 0x63, 0xdc, 0x10, 0x7b, 0xdf, 0x9e, 0xd2, 0xdb, 0xa9, 0x80, 0xaa,
++      0x72, 0xe6, 0x8e, 0x77, 0x8d, 0x35, 0xd0, 0x6f, 0xac, 0x4e, 0x37, 0xed,
++      0xda, 0xb9, 0x68, 0x16, 0x73, 0xce, 0xab, 0xd0, 0xbd, 0x83, 0xf6, 0x4f,
++      0x5f, 0xba, 0xb7, 0x0f, 0xe4, 0x67, 0xea, 0x16, 0xce, 0x5f, 0x76, 0x1f,
++      0x02, 0x67, 0x5a, 0x50, 0xd7, 0x5c, 0xe4, 0x10, 0x19, 0xf4, 0x96, 0xb7,
++      0xc9, 0xd3, 0x3a, 0x98, 0x9f, 0xae, 0x67, 0x2e, 0x1f, 0x63, 0x2e, 0x1f,
++      0x63, 0xbd, 0xd4, 0x0e, 0x79, 0x4e, 0x64, 0xb4, 0x1c, 0x67, 0xfe, 0xf3,
++      0x35, 0xf2, 0x9f, 0x1d, 0xf7, 0x8b, 0x5c, 0xd3, 0x71, 0xd7, 0xde, 0xab,
++      0x90, 0xa4, 0x3d, 0xdd, 0xc9, 0x6b, 0x7d, 0xf7, 0x5f, 0x8c, 0x3b, 0x98,
++      0xc7, 0xc7, 0xc6, 0x16, 0xa3, 0x9f, 0x99, 0xe8, 0xc6, 0xbd, 0x9f, 0x45,
++      0x17, 0xf9, 0xd4, 0x12, 0x62, 0xf4, 0xea, 0x87, 0x47, 0x6c, 0xcc, 0x16,
++      0xcc, 0x7f, 0x2d, 0x0d, 0xbc, 0x49, 0x4e, 0xd6, 0x9f, 0x3a, 0x60, 0xf3,
++      0x34, 0x17, 0xe3, 0x43, 0x31, 0x71, 0x29, 0xbc, 0xcb, 0xe8, 0x58, 0xa6,
++      0x5a, 0x8b, 0x4b, 0x16, 0x06, 0x7a, 0xdf, 0xa6, 0xaf, 0x56, 0xed, 0x53,
++      0x51, 0x3d, 0x20, 0xb9, 0x3a, 0xf9, 0x11, 0x31, 0xfa, 0x05, 0x62, 0x74,
++      0xf9, 0x9e, 0x5c, 0x5e, 0x9e, 0x60, 0xde, 0x55, 0x6d, 0xe4, 0x72, 0xf3,
++      0xed, 0x7d, 0xb2, 0xf7, 0xc6, 0x8d, 0xe7, 0x68, 0xfb, 0x47, 0xf3, 0xb6,
++      0x7f, 0x2c, 0x8f, 0xc1, 0x16, 0x73, 0xf3, 0x37, 0x6d, 0xfc, 0xcd, 0xe5,
++      0xe6, 0xf3, 0x07, 0x8c, 0x8e, 0x30, 0x31, 0xfa, 0x33, 0x7b, 0xa4, 0x7f,
++      0x0d, 0xd5, 0xc4, 0x93, 0x1a, 0x62, 0x49, 0xc5, 0x80, 0xac, 0xcf, 0x04,
++      0xda, 0xc7, 0x55, 0x9f, 0xdd, 0xc7, 0x26, 0xca, 0xd6, 0x9d, 0x92, 0x77,
++      0x6c, 0x0d, 0x6d, 0x83, 0x12, 0x30, 0xaf, 0xa1, 0x3e, 0xf7, 0xa5, 0xaf,
++      0x42, 0x7b, 0xff, 0x2c, 0xec, 0x1f, 0x92, 0xf8, 0x22, 0xed, 0x4b, 0x2e,
++      0xee, 0xc4, 0xfb, 0xbb, 0x66, 0xe3, 0xfd, 0x91, 0x73, 0x79, 0xf8, 0xe6,
++      0x54, 0xf4, 0x5e, 0x86, 0xd7, 0xe5, 0x92, 0x87, 0xbf, 0xc4, 0x3c, 0xfc,
++      0x6d, 0x45, 0xd6, 0x10, 0x55, 0xdc, 0xb8, 0xc0, 0xc1, 0xf8, 0xa2, 0xfb,
++      0x5f, 0x74, 0xc4, 0xe5, 0x39, 0xb2, 0xff, 0x7e, 0xde, 0x7f, 0x9e, 0xf1,
++      0x7c, 0x80, 0x33, 0x11, 0xad, 0x76, 0xe0, 0x99, 0x85, 0xf1, 0xa8, 0x8b,
++      0xd7, 0x7b, 0xc9, 0x53, 0x66, 0x1a, 0x07, 0xe9, 0x9b, 0xb5, 0xe1, 0xf9,
++      0x0e, 0x07, 0xce, 0x98, 0x7a, 0xcb, 0x6e, 0x5e, 0x7b, 0x36, 0x23, 0xbe,
++      0x18, 0x26, 0x7e, 0x2d, 0xca, 0xfb, 0xa2, 0xbc, 0x8f, 0x01, 0xf7, 0x6c,
++      0xda, 0xeb, 0x6b, 0x29, 0xbd, 0xff, 0x59, 0xda, 0x69, 0xf5, 0x59, 0x3b,
++      0x2d, 0xec, 0xd3, 0x82, 0xbb, 0x2a, 0xd2, 0x82, 0x50, 0xb2, 0xb0, 0x5f,
++      0x6b, 0x3f, 0x7a, 0x32, 0xf7, 0x60, 0xe3, 0x4e, 0x7d, 0xa3, 0xac, 0x11,
++      0xbd, 0x10, 0x8a, 0x5b, 0x95, 0x46, 0x27, 0x5c, 0x0b, 0x8c, 0x16, 0xe6,
++      0x2f, 0xb1, 0xef, 0x2a, 0xa5, 0xb4, 0xdf, 0xc3, 0xd8, 0x34, 0xac, 0x07,
++      0xb7, 0x2b, 0x06, 0xe3, 0x86, 0x86, 0xfd, 0x83, 0x45, 0xb8, 0x75, 0x57,
++      0x1b, 0xf6, 0xf5, 0x9b, 0xc4, 0xcf, 0x5a, 0xff, 0x69, 0xbc, 0x87, 0x63,
++      0xa6, 0xbc, 0xaf, 0x54, 0x82, 0x36, 0x4d, 0xf6, 0x29, 0x31, 0xfb, 0x9c,
++      0x7e, 0xde, 0x3b, 0xe0, 0x9e, 0x12, 0xa3, 0xf0, 0x2e, 0xbf, 0xc1, 0x7c,
++      0x71, 0x12, 0x7b, 0x06, 0x65, 0x6d, 0x60, 0x9a, 0x72, 0xa4, 0x7f, 0xae,
++      0xaf, 0x8b, 0xd8, 0x7f, 0xaf, 0x99, 0xc5, 0x99, 0x85, 0xd5, 0xc0, 0x0c,
++      0x05, 0xa1, 0xcf, 0x04, 0xe4, 0x5b, 0x35, 0xfc, 0x7b, 0xd7, 0xf2, 0x7f,
++      0x51, 0xda, 0xa9, 0xa9, 0xc8, 0xad, 0x17, 0xbc, 0x5e, 0x2d, 0xef, 0xf2,
++      0x1d, 0x49, 0xcd, 0xac, 0xcc, 0x3d, 0x77, 0xfe, 0xa4, 0x3e, 0x5e, 0xb3,
++      0xfc, 0x76, 0x1b, 0x85, 0xba, 0xaf, 0x5a, 0x51, 0xaf, 0x94, 0x2f, 0x62,
++      0xdb, 0xe2, 0x9f, 0xd3, 0x94, 0x76, 0xe2, 0xa9, 0x1a, 0x9a, 0xa6, 0xb4,
++      0x0d, 0x5d, 0xd8, 0xee, 0x8b, 0x56, 0xb4, 0x45, 0xce, 0x0b, 0xe5, 0xdc,
++      0xd3, 0x50, 0x2a, 0x65, 0x0b, 0xf7, 0x9f, 0xc9, 0xb7, 0x55, 0x4c, 0xae,
++      0x9a, 0x2b, 0x73, 0x6b, 0xbf, 0xec, 0xad, 0x8a, 0xe2, 0x68, 0xc3, 0xd4,
++      0xf6, 0x0a, 0x7d, 0x7f, 0xef, 0xbc, 0xf6, 0x72, 0x65, 0x67, 0xb1, 0x4d,
++      0x29, 0x9f, 0xc5, 0xff, 0x6b, 0xaf, 0x23, 0xbc, 0x61, 0xef, 0x93, 0xdc,
++      0x6a, 0x36, 0x46, 0x4b, 0xf0, 0x39, 0xa8, 0x97, 0xc6, 0xe7, 0x97, 0xd8,
++      0xfc, 0x36, 0xda, 0x52, 0xc2, 0x1c, 0xd7, 0x6d, 0x44, 0xef, 0x75, 0x23,
++      0x9b, 0x65, 0x5c, 0x6e, 0x3d, 0xa3, 0xec, 0x57, 0x6e, 0x0d, 0xe8, 0x1b,
++      0xdf, 0x25, 0xdf, 0x78, 0x3e, 0x10, 0x27, 0xd6, 0x1b, 0xbe, 0x3e, 0x45,
++      0x37, 0xd7, 0x32, 0xa6, 0x3d, 0xcb, 0x1c, 0x72, 0x4d, 0xa0, 0xd7, 0x7e,
++      0xc6, 0xa8, 0x44, 0x56, 0xe0, 0x12, 0xfb, 0xbb, 0x2c, 0x2d, 0x30, 0xd2,
++      0xcf, 0xcb, 0x9a, 0x17, 0x7f, 0xc7, 0x30, 0xdf, 0xbe, 0xb6, 0x06, 0x41,
++      0xfb, 0xff, 0xaa, 0xfc, 0xb7, 0x5b, 0x5a, 0x51, 0x6b, 0xff, 0xbf, 0x19,
++      0x73, 0xd3, 0x67, 0xd7, 0x86, 0xd1, 0x6d, 0x5a, 0xd6, 0x53, 0xa6, 0x85,
++      0x37, 0xce, 0xed, 0xd1, 0x5e, 0xe1, 0x60, 0xce, 0x41, 0x17, 0x8e, 0xe5,
++      0xbe, 0x5d, 0x75, 0xee, 0xfd, 0x8c, 0xa5, 0xe7, 0xed, 0xd1, 0x96, 0xf7,
++      0xe2, 0xab, 0xed, 0x6f, 0x93, 0xcd, 0x5b, 0xe4, 0xc4, 0x73, 0x89, 0x8a,
++      0x98, 0x87, 0xbf, 0x37, 0x2d, 0x2a, 0xc2, 0xfa, 0x10, 0x39, 0xdf, 0xa5,
++      0xc7, 0x71, 0xda, 0xfe, 0x46, 0x43, 0x3c, 0x24, 0xdf, 0x66, 0x38, 0x9a,
++      0x50, 0x71, 0x6c, 0xb0, 0x27, 0xb4, 0xc7, 0xee, 0xfb, 0x55, 0x74, 0x8f,
++      0xca, 0x73, 0xbf, 0x16, 0xac, 0x4e, 0x4c, 0xda, 0x7b, 0xda, 0x36, 0xa7,
++      0x24, 0xf7, 0xd6, 0xb3, 0x6b, 0x98, 0xaf, 0xaa, 0x8e, 0x20, 0x6e, 0x62,
++      0x7c, 0x79, 0x21, 0x41, 0x3b, 0x5d, 0xa8, 0x77, 0x7c, 0x97, 0x1c, 0xa1,
++      0x22, 0xa2, 0x07, 0xdf, 0x51, 0x5a, 0xc9, 0xc5, 0xdc, 0x98, 0x48, 0x88,
++      0x2d, 0xca, 0xb7, 0x9d, 0x6e, 0xc6, 0x7e, 0x72, 0xd2, 0xe7, 0x13, 0x1a,
++      0x4e, 0x37, 0x78, 0x90, 0x26, 0x47, 0x7d, 0x2e, 0xe1, 0xc6, 0x63, 0xe4,
++      0xa8, 0x8f, 0x0e, 0xca, 0x1a, 0x61, 0x13, 0x1a, 0x13, 0xb2, 0x3e, 0x4c,
++      0xde, 0x35, 0xe2, 0xa5, 0x3d, 0x5a, 0x56, 0x37, 0x6d, 0xb7, 0x4d, 0x9b,
++      0x60, 0x9f, 0xb2, 0xae, 0x18, 0xc5, 0x35, 0xe4, 0x1d, 0x8f, 0x8e, 0xf8,
++      0xf0, 0x7d, 0x72, 0xf3, 0x24, 0xeb, 0xbd, 0x90, 0xf0, 0xa3, 0x2f, 0xed,
++      0xc3, 0xd3, 0xe4, 0xe8, 0x5b, 0x78, 0x2e, 0xdf, 0x09, 0x2b, 0x32, 0x82,
++      0xe4, 0xc1, 0x87, 0x51, 0xd6, 0x77, 0x11, 0xd6, 0xad, 0x3c, 0x08, 0xb5,
++      0xef, 0x10, 0x8f, 0x2b, 0x19, 0xb3, 0xaf, 0x44, 0x6a, 0x30, 0x82, 0xd4,
++      0xc8, 0x8f, 0xd0, 0x3b, 0x28, 0xe3, 0x92, 0xef, 0x3d, 0xc9, 0xbe, 0x27,
++      0x72, 0xbd, 0x3e, 0x2f, 0x86, 0x46, 0xa4, 0x9f, 0x6a, 0xf6, 0xfd, 0xe7,
++      0xb6, 0xff, 0x1f, 0xd6, 0xba, 0x1b, 0xa5, 0xed, 0x83, 0x9f, 0xd0, 0xbe,
++      0xe8, 0xaa, 0xf0, 0x9e, 0xa1, 0xac, 0x75, 0xb8, 0xd9, 0xa6, 0x07, 0x8e,
++      0x48, 0x76, 0x65, 0x39, 0xf4, 0xe8, 0x36, 0xc5, 0x68, 0x2e, 0x53, 0x26,
++      0xb1, 0x2d, 0x23, 0xef, 0x8d, 0x15, 0xe3, 0x69, 0xe2, 0xa3, 0x2b, 0xa4,
++      0x6b, 0xdf, 0xa5, 0xed, 0x2c, 0x21, 0xa6, 0xbc, 0x61, 0x7e, 0x06, 0x71,
++      0x4d, 0xf4, 0x57, 0x8c, 0x1f, 0xf4, 0xbb, 0xf1, 0x4e, 0x28, 0x82, 0xdc,
++      0xb7, 0xbd, 0x3c, 0xf8, 0x71, 0xc2, 0xcb, 0xf9, 0xaa, 0xcb, 0x1a, 0x8e,
++      0xb9, 0xc0, 0xb4, 0xdc, 0xb5, 0xa3, 0x89, 0x35, 0xd8, 0x43, 0x79, 0x5f,
++      0x48, 0x9c, 0xe1, 0xfc, 0xb4, 0x53, 0xff, 0xa2, 0xef, 0x78, 0x5e, 0xd7,
++      0x3d, 0xd4, 0xf5, 0x2c, 0x3c, 0x9b, 0xb8, 0x0f, 0x8f, 0x52, 0xfe, 0x47,
++      0xfa, 0x8d, 0xe8, 0xc5, 0xca, 0x61, 0xe2, 0x65, 0x31, 0x8e, 0xb1, 0xed,
++      0x5b, 0x99, 0x29, 0x4f, 0x4a, 0x5f, 0x29, 0x59, 0x9f, 0x54, 0xf0, 0xce,
++      0xa2, 0xc3, 0x18, 0xe7, 0xbd, 0x1f, 0xf3, 0x77, 0x78, 0x61, 0x25, 0xfb,
++      0x10, 0xfd, 0xf8, 0xed, 0x5c, 0xa0, 0x8b, 0x3c, 0x67, 0x79, 0xc3, 0x61,
++      0x6c, 0x1d, 0x92, 0x6b, 0x6d, 0xe8, 0xed, 0x7f, 0x0f, 0x8e, 0x10, 0x71,
++      0xc8, 0xdb, 0x40, 0x5b, 0xcf, 0x62, 0x5b, 0xfa, 0xc3, 0x69, 0x39, 0x0e,
++      0xfa, 0xca, 0x34, 0xd9, 0x8b, 0x7c, 0x34, 0x51, 0x8c, 0xe7, 0x58, 0x67,
++      0x5d, 0xc8, 0x95, 0x7f, 0x66, 0x72, 0x98, 0xfc, 0xc9, 0x89, 0x34, 0xfb,
++      0x48, 0xd8, 0x6d, 0x4c, 0x53, 0x76, 0xd3, 0x0f, 0x2b, 0x17, 0x4e, 0x53,
++      0x52, 0x43, 0xc2, 0xed, 0x7f, 0x84, 0x27, 0xef, 0xcf, 0xe9, 0x70, 0x8f,
++      0xb9, 0x06, 0x43, 0xe9, 0x1f, 0x17, 0xda, 0x9b, 0xf2, 0x2e, 0x9c, 0xbc,
++      0x9f, 0x53, 0x78, 0x57, 0x27, 0xf7, 0x4c, 0xeb, 0xdb, 0x99, 0x0a, 0xf2,
++      0xe7, 0x52, 0xda, 0x5a, 0x51, 0xcc, 0xcb, 0xb8, 0xba, 0x66, 0x81, 0x86,
++      0x9d, 0x97, 0xd5, 0x4d, 0x43, 0x85, 0xe6, 0xfc, 0x75, 0xc3, 0xf3, 0xec,
++      0xa7, 0x22, 0x56, 0x15, 0xd9, 0x63, 0xef, 0x83, 0x0a, 0x5d, 0x56, 0xc3,
++      0xb8, 0x22, 0xcf, 0x86, 0x63, 0x78, 0x2b, 0x51, 0x1d, 0xab, 0x8e, 0x54,
++      0x12, 0x6f, 0x4f, 0xa3, 0x6f, 0xd8, 0x89, 0x0a, 0xf2, 0xe6, 0xf2, 0x64,
++      0x35, 0xdc, 0xf6, 0x3a, 0xde, 0x45, 0xe4, 0x2b, 0xb3, 0xc9, 0x49, 0x66,
++      0xa1, 0x92, 0xbc, 0xc4, 0x13, 0xb2, 0xac, 0x9f, 0x2d, 0xb4, 0xac, 0x4b,
++      0x78, 0x94, 0xf0, 0x38, 0x15, 0x12, 0x3f, 0x8d, 0xa2, 0xce, 0xf6, 0x57,
++      0x03, 0xf5, 0xf6, 0xff, 0x26, 0xfa, 0x7a, 0x47, 0x68, 0xfe, 0xf8, 0x7d,
++      0xa1, 0xb9, 0xe3, 0x35, 0x50, 0x07, 0xa6, 0xc3, 0xc1, 0xb6, 0xbe, 0x70,
++      0x99, 0x85, 0x26, 0xfa, 0xf0, 0x5a, 0x53, 0x78, 0xd1, 0x1a, 0xf2, 0xa2,
++      0xde, 0x90, 0x31, 0x7e, 0x10, 0x57, 0x33, 0xce, 0xb9, 0x07, 0x7c, 0xec,
++      0x47, 0x72, 0x6c, 0x67, 0x76, 0x0e, 0xf9, 0xf6, 0x67, 0x16, 0x0a, 0x47,
++      0x6a, 0x25, 0x47, 0x3a, 0x84, 0xd6, 0xf1, 0xc3, 0xb8, 0x9e, 0x65, 0x3c,
++      0xe4, 0x2a, 0xc9, 0xcc, 0x8f, 0xd0, 0x97, 0xb1, 0xb0, 0x3d, 0x94, 0xc5,
++      0xb5, 0x6c, 0xbb, 0x74, 0xa0, 0x99, 0xdc, 0x70, 0x05, 0xd6, 0x8d, 0xcb,
++      0xbb, 0x52, 0x13, 0x58, 0x3e, 0x4e, 0xce, 0x39, 0x5e, 0xf0, 0x57, 0xe1,
++      0x4b, 0x2b, 0xc8, 0x97, 0x64, 0x2d, 0x6d, 0x95, 0xbd, 0x96, 0xa6, 0xd2,
++      0x0f, 0x1b, 0x13, 0xf2, 0x9e, 0x50, 0x1c, 0xab, 0xc7, 0x05, 0xab, 0xef,
++      0x41, 0xf7, 0xb8, 0xac, 0xcd, 0x7e, 0x33, 0x74, 0xf1, 0xf8, 0xab, 0x68,
++      0x1c, 0x1f, 0x0a, 0xcd, 0x1b, 0x1f, 0xa1, 0xdc, 0x09, 0xca, 0xd6, 0x1f,
++      0xaa, 0x1d, 0x1f, 0x0c, 0x05, 0xc7, 0x77, 0x87, 0x02, 0xe3, 0x2d, 0xd8,
++      0x32, 0xbe, 0x0a, 0x9b, 0xc7, 0x37, 0x62, 0xd3, 0xb8, 0xe0, 0xfc, 0x24,
++      0x96, 0x8d, 0xbf, 0x81, 0xa5, 0xe3, 0xcf, 0xa3, 0x69, 0xfc, 0x04, 0x96,
++      0x8c, 0xff, 0x08, 0xcd, 0xe3, 0xaf, 0x70, 0x2c, 0xb2, 0xd6, 0x2b, 0xeb,
++      0xbc, 0x85, 0xe7, 0x6a, 0x53, 0xf7, 0x24, 0xcb, 0x5a, 0x86, 0x7c, 0xbf,
++      0x43, 0xe6, 0xd0, 0x85, 0x95, 0xda, 0x6b, 0xe8, 0xd9, 0x25, 0xdf, 0x24,
++      0xac, 0xd3, 0xba, 0xe5, 0xf9, 0xa3, 0xf7, 0x79, 0xd9, 0x63, 0x4f, 0x1b,
++      0x3b, 0xff, 0xbd, 0xbc, 0xc9, 0xb3, 0xcf, 0x18, 0xe5, 0x1b, 0x18, 0xf2,
++      0xec, 0x73, 0x12, 0x5d, 0x99, 0xdf, 0x5a, 0x51, 0x4d, 0xca, 0xca, 0xf7,
++      0x3f, 0xc4, 0x1e, 0x5e, 0xc3, 0x43, 0xbb, 0x26, 0xc9, 0x59, 0xb2, 0xf6,
++      0x5a, 0xcd, 0xbb, 0xf3, 0xe4, 0x9b, 0x56, 0xf2, 0xce, 0xfe, 0x6b, 0x48,
++      0x8d, 0x02, 0xe3, 0x0f, 0x8b, 0x1f, 0xae, 0xa1, 0x1f, 0x66, 0xc5, 0x27,
++      0xe3, 0xc4, 0xe4, 0xaf, 0x78, 0x70, 0x0f, 0x79, 0x49, 0x11, 0xb2, 0x23,
++      0xa5, 0x78, 0x66, 0x30, 0x6e, 0xcd, 0x31, 0x3c, 0x28, 0x8f, 0x18, 0xd9,
++      0x4b, 0x18, 0x67, 0x5f, 0xe1, 0xb5, 0x89, 0x7e, 0xf8, 0x7d, 0x46, 0xc0,
++      0x37, 0x87, 0xe7, 0xc7, 0x86, 0xb2, 0xe4, 0x14, 0x1d, 0x98, 0xe4, 0x7f,
++      0xc9, 0x41, 0x81, 0x6e, 0x0c, 0x0d, 0x89, 0x3e, 0x5b, 0xa8, 0x4f, 0xc1,
++      0x45, 0xbd, 0xa3, 0x89, 0x78, 0x68, 0x29, 0x82, 0x87, 0x2a, 0xca, 0x1e,
++      0xe8, 0xa4, 0xbf, 0xea, 0xb1, 0x9f, 0x30, 0x16, 0xf4, 0x29, 0x3f, 0xc2,
++      0x73, 0xcc, 0x19, 0x4a, 0x1f, 0x20, 0xff, 0x20, 0x56, 0x56, 0x44, 0x14,
++      0x63, 0x79, 0xe0, 0x14, 0x9e, 0x19, 0x71, 0xc2, 0x9d, 0x74, 0x62, 0x82,
++      0x38, 0xe9, 0x48, 0xca, 0xf3, 0x7a, 0x8d, 0xb2, 0xc8, 0xba, 0xd0, 0x09,
++      0x64, 0xed, 0xe7, 0x69, 0xf2, 0x3c, 0xe4, 0x45, 0xbb, 0x1f, 0x27, 0x65,
++      0xef, 0x21, 0x96, 0x76, 0xa5, 0x5e, 0x42, 0xd3, 0x90, 0x07, 0x73, 0x92,
++      0x13, 0xcc, 0x5f, 0x5e, 0x45, 0x6a, 0xd7, 0x2c, 0x7c, 0x95, 0x3c, 0x70,
++      0x66, 0xd2, 0x84, 0x46, 0xbd, 0xdd, 0x34, 0x66, 0x22, 0xba, 0x77, 0x15,
++      0x56, 0xee, 0xfd, 0x22, 0x8f, 0xe9, 0xb8, 0x7e, 0x6f, 0x3b, 0x3e, 0x3f,
++      0x16, 0x47, 0xeb, 0x58, 0x0f, 0x8f, 0x36, 0x5c, 0xb7, 0xa3, 0x12, 0xe9,
++      0x90, 0xc6, 0x9c, 0xba, 0x8d, 0x39, 0xb5, 0xf0, 0xa1, 0xd5, 0x78, 0x86,
++      0xb8, 0x13, 0x0c, 0xad, 0xc6, 0x84, 0xed, 0x8b, 0xb2, 0x97, 0x71, 0x35,
++      0x36, 0x31, 0x5f, 0x1e, 0xc6, 0x6a, 0x74, 0xf1, 0xda, 0x0e, 0x7b, 0x0e,
++      0x0e, 0x63, 0x31, 0xf3, 0xa1, 0xf7, 0x2f, 0x3f, 0x8c, 0x2b, 0xf6, 0x48,
++      0xdf, 0xa7, 0x91, 0xda, 0xb9, 0x86, 0x6d, 0x66, 0xd1, 0x32, 0xf6, 0x43,
++      0x7c, 0x7e, 0x07, 0x6e, 0xab, 0x44, 0x25, 0x9e, 0x0f, 0x05, 0x5a, 0xfb,
++      0x94, 0x1f, 0xda, 0x6d, 0x6f, 0xa2, 0x1f, 0x6f, 0x65, 0xb9, 0x47, 0xd2,
++      0x27, 0xd0, 0x9b, 0x9a, 0x3a, 0xa7, 0xf6, 0x7b, 0xed, 0x8c, 0x07, 0x2f,
++      0x63, 0xdf, 0xc8, 0x24, 0xb1, 0xf7, 0x24, 0x8f, 0x0b, 0x9f, 0x5f, 0x7b,
++      0xed, 0x7c, 0x26, 0x67, 0x37, 0x92, 0xbf, 0xc8, 0x3a, 0x70, 0x0b, 0x7c,
++      0x29, 0xe1, 0x44, 0xd9, 0xad, 0x33, 0xa1, 0x6f, 0x0c, 0xdb, 0x1c, 0xc9,
++      0x88, 0x91, 0x1b, 0xb5, 0x7c, 0x57, 0xf1, 0x90, 0x1b, 0x05, 0xb1, 0x22,
++      0xa3, 0x47, 0xaf, 0xa5, 0xbe, 0x4b, 0xee, 0x7f, 0x19, 0xce, 0xfb, 0x9d,
++      0x28, 0x4e, 0xca, 0xda, 0xc9, 0x04, 0x7a, 0x33, 0xf2, 0xfe, 0x6e, 0x56,
++      0x2f, 0x26, 0xae, 0x16, 0x25, 0xb3, 0x8c, 0xfd, 0xd9, 0xf9, 0x45, 0x90,
++      0x77, 0xf1, 0xaf, 0xc2, 0x9a, 0xfe, 0x28, 0xba, 0x4c, 0x79, 0x57, 0x27,
++      0x37, 0xfe, 0x39, 0x0d, 0x2f, 0xa3, 0x9b, 0xf1, 0xa7, 0x8d, 0x98, 0xf8,
++      0x55, 0xfb, 0x59, 0xe8, 0xcb, 0xe8, 0x19, 0x2c, 0xbc, 0xbb, 0x2e, 0x6d,
++      0x3e, 0x4f, 0xbd, 0xb9, 0xf2, 0xdf, 0xec, 0x91, 0x36, 0x75, 0xd3, 0xaf,
++      0x4e, 0xcb, 0xbd, 0x8b, 0x03, 0xfb, 0x19, 0x36, 0xed, 0xe3, 0x35, 0xf4,
++      0xee, 0x2a, 0x8c, 0x99, 0xb9, 0x41, 0xe0, 0x35, 0xf4, 0x8f, 0xca, 0xd8,
++      0xaf, 0x9f, 0x96, 0x7b, 0xc7, 0x78, 0xaa, 0x3e, 0x0a, 0x75, 0x1d, 0xb4,
++      0xe7, 0xc2, 0xfd, 0x8f, 0xfb, 0x6e, 0xd0, 0xa7, 0xec, 0x6f, 0xf0, 0xe4,
++      0xbe, 0x81, 0x04, 0x3c, 0x99, 0x90, 0x77, 0xfb, 0xd5, 0xc5, 0x2e, 0xa8,
++      0x5e, 0x17, 0x8a, 0x19, 0x2f, 0x6a, 0xd0, 0xed, 0xb5, 0x70, 0x35, 0xc7,
++      0xb2, 0xbf, 0xfe, 0x3a, 0x66, 0x1a, 0xf1, 0x56, 0x97, 0xfd, 0xce, 0xe1,
++      0x8a, 0xbf, 0xfe, 0xe8, 0x3b, 0x87, 0x6f, 0x10, 0x67, 0x15, 0x94, 0x1b,
++      0x37, 0xe1, 0x05, 0x3b, 0xa6, 0x28, 0x28, 0x9b, 0x2b, 0xeb, 0x98, 0x7e,
++      0x3c, 0x6b, 0xd4, 0xf9, 0xab, 0xe4, 0xf9, 0x94, 0x72, 0xca, 0x92, 0x6f,
++      0x06, 0x6c, 0xcb, 0xfc, 0xb1, 0x3d, 0xf1, 0x4f, 0x61, 0xcb, 0xce, 0x30,
++      0xe4, 0xfd, 0x15, 0xa7, 0xa1, 0x79, 0x73, 0xfc, 0x4a, 0x64, 0x93, 0xbd,
++      0xe4, 0xb7, 0x12, 0x9c, 0xde, 0xa0, 0x9f, 0xbe, 0x21, 0x7b, 0xa6, 0xc8,
++      0x99, 0xfe, 0x12, 0xc1, 0xaa, 0xc2, 0x38, 0x65, 0xaf, 0xa9, 0x92, 0x1b,
++      0xab, 0x5d, 0x47, 0xca, 0x4a, 0xbd, 0x37, 0xec, 0x35, 0x5c, 0x97, 0xf1,
++      0x5b, 0xeb, 0x4d, 0x6f, 0x35, 0xcb, 0x1e, 0xce, 0xdf, 0x9f, 0x14, 0x9f,
++      0x33, 0xe5, 0x1b, 0x56, 0x4e, 0xbb, 0x8e, 0xe8, 0xf7, 0x5c, 0x9d, 0xee,
++      0x94, 0x83, 0xb8, 0x79, 0xc2, 0xea, 0xf4, 0xca, 0x18, 0xee, 0xbc, 0xa0,
++      0x8e, 0xac, 0x2b, 0x68, 0xd2, 0x6f, 0x58, 0xc6, 0xdc, 0x95, 0xf9, 0x68,
++      0x9f, 0xb2, 0xde, 0x5b, 0x64, 0x94, 0xe1, 0x54, 0x55, 0x6e, 0x1d, 0xe6,
++      0x9c, 0x8c, 0x3d, 0x35, 0xb2, 0x4f, 0xaf, 0xd8, 0x3e, 0xb7, 0xfb, 0x35,
++      0xcf, 0xd5, 0xfb, 0xbb, 0xfc, 0x78, 0xab, 0xed, 0x77, 0x86, 0x1e, 0xb4,
++      0x79, 0x91, 0x63, 0xca, 0xb8, 0x4b, 0x6a, 0xce, 0xef, 0xe7, 0x2b, 0xf9,
++      0x7e, 0x45, 0x1e, 0xef, 0x94, 0x3e, 0x44, 0xae, 0x87, 0xf3, 0x75, 0xf4,
++      0x70, 0xd4, 0xee, 0x5f, 0x65, 0xbe, 0x55, 0xe8, 0x93, 0xfe, 0xb8, 0xb0,
++      0xd0, 0x46, 0x56, 0xec, 0xb3, 0xb3, 0x98, 0xb1, 0xed, 0x54, 0xc3, 0x3d,
++      0xd8, 0x94, 0x10, 0x3d, 0xcb, 0xb7, 0x60, 0x89, 0xe1, 0x36, 0x57, 0x73,
++      0xd1, 0x5f, 0x2f, 0xc3, 0x90, 0x16, 0xc7, 0x9e, 0x7a, 0x79, 0x47, 0xce,
++      0x45, 0x9f, 0x88, 0xa3, 0xc4, 0x28, 0x96, 0xfd, 0xc7, 0xf6, 0x1e, 0x94,
++      0x7d, 0xa6, 0x1e, 0x7d, 0x52, 0xbe, 0x55, 0x76, 0xa9, 0xbd, 0x5e, 0xd5,
++      0x3c, 0x04, 0xb9, 0x6e, 0xe2, 0xda, 0xf3, 0xf2, 0xfe, 0x12, 0xda, 0x8e,
++      0xbd, 0x27, 0xda, 0x94, 0x77, 0xe8, 0xfa, 0x12, 0xf2, 0x2e, 0x57, 0x5d,
++      0x8c, 0xfc, 0x12, 0x2f, 0xa4, 0x65, 0xbf, 0xc2, 0xef, 0xac, 0x78, 0x8d,
++      0xec, 0x8b, 0x9c, 0x5a, 0xa7, 0x88, 0xb8, 0x16, 0x08, 0x57, 0x28, 0x85,
++      0xf7, 0xb9, 0xce, 0xfd, 0x5d, 0x4f, 0x9b, 0x39, 0x6d, 0xbf, 0x83, 0x27,
++      0x67, 0x11, 0x34, 0xa6, 0xe4, 0x9b, 0xa7, 0xfa, 0xc4, 0x72, 0xd4, 0x65,
++      0x6b, 0x1d, 0xce, 0x3c, 0x7f, 0x09, 0x63, 0x05, 0xed, 0x66, 0x73, 0x20,
++      0x6c, 0xbf, 0x6b, 0xb6, 0x2c, 0x55, 0x1b, 0x7c, 0x04, 0x7a, 0xfb, 0xdb,
++      0x2c, 0x7f, 0x5d, 0xe6, 0xfb, 0xd6, 0x90, 0x57, 0xc6, 0x54, 0xc0, 0x88,
++      0x13, 0xf4, 0x0d, 0xea, 0x31, 0x22, 0xfe, 0xe1, 0x41, 0x55, 0x24, 0x4c,
++      0x3f, 0x96, 0xf8, 0x2f, 0xef, 0xa9, 0xe9, 0xbb, 0xe3, 0x30, 0xd1, 0xc8,
++      0x1c, 0xdd, 0x65, 0xef, 0x73, 0xd6, 0xfd, 0x2b, 0x19, 0x87, 0x8e, 0x9c,
++      0xdd, 0x13, 0x20, 0x7c, 0xe1, 0xc7, 0x35, 0xf9, 0xbd, 0xd0, 0xee, 0x39,
++      0x8c, 0x8f, 0x96, 0xfd, 0x9c, 0x7f, 0x8d, 0x8d, 0x2d, 0x9a, 0xa1, 0xef,
++      0xff, 0x95, 0xa3, 0x13, 0x4f, 0x2c, 0x30, 0x3a, 0x0e, 0xa8, 0xd9, 0x21,
++      0x1f, 0x71, 0xe6, 0x4a, 0x47, 0x74, 0x07, 0xff, 0xfb, 0x5f, 0xb4, 0xbf,
++      0xa1, 0x22, 0x75, 0xf5, 0xe0, 0x2a, 0x55, 0xf6, 0x0f, 0xb5, 0x60, 0xac,
++      0x4f, 0xde, 0x7d, 0xd0, 0x5b, 0xbf, 0xad, 0x74, 0x62, 0x43, 0xc8, 0x68,
++      0xd9, 0xa8, 0xe8, 0xcd, 0x7f, 0xaf, 0xe8, 0xfe, 0x90, 0x22, 0xe5, 0x82,
++      0xb2, 0xb6, 0x77, 0x36, 0xf6, 0xba, 0xd8, 0xc7, 0xde, 0x84, 0x1e, 0x9e,
++      0xc6, 0xb2, 0xa7, 0x4c, 0xc3, 0xf7, 0x1e, 0xdb, 0xfc, 0x09, 0x8f, 0x1d,
++      0xf6, 0x3b, 0xec, 0x52, 0x3e, 0x3a, 0xdf, 0x65, 0x7f, 0x8f, 0xb8, 0x95,
++      0x31, 0x45, 0xbe, 0x35, 0x1c, 0x83, 0x96, 0x9c, 0x45, 0x13, 0xd3, 0x7b,
++      0x6f, 0x80, 0xe4, 0xc0, 0x37, 0x4f, 0x47, 0xa9, 0x07, 0xde, 0x48, 0x27,
++      0xe6, 0x2e, 0x30, 0x7c, 0x8b, 0x54, 0xbb, 0x7e, 0x30, 0xaa, 0x4a, 0x7d,
++      0xdd, 0x3f, 0x08, 0x69, 0x23, 0x6b, 0x69, 0x73, 0x2b, 0xed, 0x3a, 0x0b,
++      0xd4, 0xcf, 0xc1, 0xf5, 0xe9, 0x5f, 0xcb, 0x37, 0x8b, 0xb4, 0x6a, 0x43,
++      0xea, 0xc4, 0x77, 0x68, 0xf8, 0x63, 0xf5, 0x04, 0x57, 0x7e, 0x65, 0x61,
++      0xba, 0xd4, 0x93, 0x3d, 0x66, 0x37, 0xe3, 0x76, 0xfb, 0xbb, 0x2b, 0xe2,
++      0x8f, 0x7a, 0xf4, 0x6e, 0x72, 0xd5, 0x52, 0x45, 0x78, 0xaa, 0xc4, 0xa2,
++      0x36, 0xe2, 0x61, 0x27, 0xb4, 0x90, 0xde, 0x7b, 0x91, 0xea, 0x41, 0x71,
++      0x64, 0x54, 0xf6, 0xd9, 0xec, 0x9e, 0xa7, 0xe6, 0xf6, 0xe3, 0xc4, 0xd8,
++      0xee, 0x91, 0x3f, 0xfa, 0xdc, 0x97, 0x7d, 0x95, 0x9a, 0xf2, 0xce, 0x8e,
++      0xfd, 0x9e, 0x48, 0x5b, 0xc2, 0x91, 0xdf, 0x5f, 0x58, 0x98, 0x5b, 0x0d,
++      0x6b, 0x98, 0x17, 0xac, 0x95, 0x6f, 0x63, 0x72, 0xac, 0xeb, 0x12, 0xb2,
++      0x0a, 0xf5, 0x7f, 0x01, 0x28, 0xfc, 0xfc, 0x40, 0x38, 0x5a, 0x00, 0x00,
++      0x00 };
+ static const u32 bnx2_CP_b06FwData[(0x84/4) + 1] = {
+       0x00000000, 0x0000001b, 0x0000000f, 0x0000000a, 0x00000008, 0x00000006,
+@@ -2119,51 +2137,50 @@
+       0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002,
+       0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002, 0x00000002,
+       0x00000001, 0x00000001, 0x00000001, 0x00000000 };
+-static const u32 bnx2_CP_b06FwRodata[(0x134/4) + 1] = {
+-      0x08000f30, 0x08000d88, 0x08000fc4, 0x0800106c, 0x08000f58, 0x08000f98,
+-      0x080011a4, 0x08000da4, 0x080011c8, 0x08000df4, 0x08001498, 0x08001440,
+-      0x08000da4, 0x08000da4, 0x08000da4, 0x08001254, 0x08001254, 0x08000da4,
+-      0x08000da4, 0x080016e0, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x080013d4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x08000da4, 0x08000da4, 0x08000da4, 0x08000fb8, 0x08000da4, 0x08000da4,
+-      0x08001690, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4, 0x08000da4,
+-      0x080015bc, 0x08000da4, 0x08000da4, 0x08001348, 0x080012b8, 0x08002e50,
+-      0x08002e58, 0x08002e20, 0x08002e2c, 0x08002e38, 0x08002e44, 0x0800532c,
+-      0x080052ec, 0x080052b8, 0x0800528c, 0x08005268, 0x08005224, 0x00000000
+-};
++static const u32 bnx2_CP_b06FwRodata[(0x130/4) + 1] = {
++      0x08001e8c, 0x08001d18, 0x08001e68, 0x08001e44, 0x08001e20, 0x08001dfc,
++      0x08001dd4, 0x08001dac, 0x08001d80, 0x08001f84, 0x08001f74, 0x08001d34,
++      0x08001d34, 0x08001d34, 0x08001eb4, 0x08001eb4, 0x08001d34, 0x08001d34,
++      0x08001f64, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001f54,
++      0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34,
++      0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34,
++      0x08001d34, 0x08001d34, 0x08001f44, 0x08001d34, 0x08001d34, 0x08001f34,
++      0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34,
++      0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34,
++      0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001d34, 0x08001f1c,
++      0x08001d34, 0x08001d34, 0x08001f0c, 0x08001efc, 0x08003208, 0x08003210,
++      0x080031d8, 0x080031e4, 0x080031f0, 0x080031fc, 0x08005694, 0x08005654,
++      0x08005620, 0x080055f4, 0x080055d0, 0x0800558c, 0x00000000 };
+ static struct fw_info bnx2_cp_fw_06 = {
+-      /* Firmware version: 4.6.16 */
++      /* Firmware version: 4.4.22 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0x10,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x16,
+       .start_addr                     = 0x08000080,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x56cc,
++      .text_len                       = 0x5a34,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_CP_b06FwText,
+       .gz_text_len                    = sizeof(bnx2_CP_b06FwText),
+-      .data_addr                      = 0x08005820,
++      .data_addr                      = 0x08005b80,
+       .data_len                       = 0x84,
+       .data_index                     = 0x0,
+       .data                           = bnx2_CP_b06FwData,
+-      .sbss_addr                      = 0x080058a4,
+-      .sbss_len                       = 0xf1,
++      .sbss_addr                      = 0x08005c04,
++      .sbss_len                       = 0xe9,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08005998,
++      .bss_addr                       = 0x08005cf0,
+       .bss_len                        = 0x5d8,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x080056cc,
+-      .rodata_len                     = 0x134,
++      .rodata_addr                    = 0x08005a34,
++      .rodata_len                     = 0x130,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_CP_b06FwRodata,
+ };
+@@ -2185,747 +2202,761 @@
+ };
+ static u8 bnx2_RXP_b06FwText[] = {
+-      0xec, 0x5b, 0x5d, 0x6c, 0x1c, 0xd7, 0x75, 0x3e, 0x33, 0x3b, 0x24, 0x57,
+-      0x14, 0x45, 0x8e, 0xa8, 0x15, 0xb5, 0xb2, 0x99, 0x64, 0x97, 0x1c, 0x89,
+-      0x1b, 0x93, 0x50, 0x86, 0xec, 0x5a, 0x66, 0x92, 0x45, 0xbc, 0x59, 0x52,
+-      0x16, 0x53, 0x08, 0xf0, 0xda, 0x56, 0x5c, 0xa3, 0x31, 0x90, 0xc5, 0x92,
+-      0x76, 0xd2, 0x37, 0xc9, 0xa9, 0x5d, 0x21, 0xb1, 0xab, 0xf5, 0x92, 0x91,
+-      0x15, 0x75, 0xc5, 0x61, 0x24, 0x26, 0x72, 0x1b, 0xb7, 0xa0, 0xf9, 0x23,
+-      0xaa, 0xc1, 0x4a, 0xe3, 0x9f, 0xd8, 0xf5, 0x43, 0x64, 0x31, 0xb2, 0xad,
+-      0xfa, 0xa5, 0x80, 0xd3, 0x1f, 0xc0, 0x28, 0x8c, 0x56, 0x90, 0x6b, 0xd9,
+-      0x68, 0x81, 0x42, 0x6d, 0x51, 0xd4, 0x6d, 0x64, 0x4d, 0xbf, 0xef, 0xce,
+-      0x0c, 0xb9, 0x22, 0x94, 0xc6, 0x2f, 0x7d, 0x9b, 0x0b, 0x2c, 0xee, 0xdc,
+-      0x3b, 0xe7, 0x9e, 0x7b, 0xce, 0xb9, 0xe7, 0xf7, 0x0e, 0xf9, 0x44, 0x9b,
+-      0xb4, 0x4a, 0xd0, 0x36, 0xe1, 0x97, 0x3d, 0x70, 0xe8, 0xb1, 0xc1, 0x5d,
+-      0xbb, 0x77, 0xe1, 0x71, 0x77, 0xcc, 0x6c, 0x36, 0x38, 0xaf, 0x49, 0xd4,
+-      0xa2, 0x16, 0xb5, 0xa8, 0x45, 0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xa2,
+-      0x16, 0xb5, 0xa8, 0x45, 0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xa2, 0x16,
+-      0xb5, 0xa8, 0x45, 0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xa2, 0x16, 0xb5,
+-      0xa8, 0x45, 0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xa2, 0x16, 0xb5, 0xa8,
+-      0x45, 0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xa2, 0x16, 0xb5, 0xa8, 0x45,
+-      0x2d, 0x6a, 0x51, 0x8b, 0x5a, 0xd4, 0xfe, 0x3f, 0x5a, 0x4c, 0xc4, 0x64,
+-      0xbf, 0x29, 0xf8, 0x49, 0x5c, 0xcf, 0xa5, 0x0e, 0x16, 0x2c, 0x89, 0xc7,
+-      0x72, 0x6f, 0x3f, 0x3e, 0x6e, 0x89, 0xe4, 0xeb, 0xfd, 0xa9, 0x11, 0xf9,
+-      0xc4, 0xab, 0x24, 0x0c, 0xe1, 0xfc, 0x67, 0x72, 0xd7, 0x0f, 0x9f, 0xbf,
+-      0x2b, 0x7d, 0x6d, 0x2e, 0x26, 0x71, 0x33, 0xf7, 0xee, 0xa0, 0xb9, 0x53,
+-      0xe2, 0xdd, 0x58, 0xf3, 0x5c, 0xdf, 0xc4, 0x66, 0x69, 0x0f, 0x71, 0x79,
+-      0xde, 0x92, 0xed, 0xc9, 0x25, 0xbb, 0xa2, 0x8d, 0xf4, 0xbd, 0xa6, 0x15,
+-      0x9c, 0x1b, 0x5e, 0xde, 0xd0, 0x45, 0x07, 0xbe, 0x89, 0x7a, 0x5c, 0x1e,
+-      0x59, 0x6c, 0x95, 0x47, 0xe7, 0x36, 0x4a, 0x79, 0x4e, 0x4c, 0x3d, 0x97,
+-      0x94, 0x6f, 0x61, 0xee, 0x72, 0x0c, 0x70, 0xae, 0x94, 0x62, 0xb9, 0x8f,
+-      0xef, 0x2d, 0xd7, 0x08, 0x2f, 0xba, 0x9e, 0x5b, 0xb9, 0x77, 0xa2, 0xfe,
+-      0xe6, 0xbd, 0xe5, 0x3a, 0xe1, 0x08, 0x83, 0x77, 0xf5, 0x8f, 0xbc, 0xf3,
+-      0x7d, 0x09, 0xb9, 0xe0, 0x9a, 0xf2, 0x82, 0xfb, 0x32, 0xf6, 0x4c, 0x57,
+-      0x2a, 0xd2, 0x24, 0xe5, 0x93, 0x37, 0xbc, 0x98, 0x95, 0x4e, 0x61, 0x13,
+-      0x73, 0x44, 0xf0, 0xde, 0xc1, 0x7b, 0x07, 0xf3, 0x0b, 0x3f, 0xdf, 0x2c,
+-      0xad, 0x49, 0x39, 0xdf, 0xc7, 0x75, 0x5c, 0xc3, 0xb5, 0x8b, 0xed, 0xfe,
+-      0x3a, 0xc1, 0xba, 0xa2, 0xc4, 0x2c, 0x4f, 0x0a, 0xb6, 0x21, 0x23, 0x09,
+-      0xd1, 0x74, 0xab, 0x02, 0x3a, 0x7e, 0xd1, 0x26, 0xad, 0xc4, 0x55, 0xd1,
+-      0xf2, 0x2e, 0xfb, 0x10, 0xdf, 0x53, 0x1d, 0x3e, 0xae, 0x67, 0x81, 0xab,
+-      0x24, 0xaf, 0xbb, 0x0f, 0xcb, 0x5f, 0xb8, 0x63, 0xf2, 0x92, 0x3b, 0x01,
+-      0x9c, 0x0f, 0xc9, 0xab, 0xee, 0x7e, 0x79, 0xc5, 0x2d, 0xca, 0xcf, 0xdc,
+-      0x7d, 0xf2, 0xb2, 0x3b, 0x2a, 0x2f, 0xba, 0x79, 0xec, 0x97, 0xd1, 0x8a,
+-      0xce, 0xdd, 0x32, 0x7e, 0x92, 0x34, 0xa6, 0xaf, 0x41, 0x36, 0xf2, 0x98,
+-      0xdd, 0x67, 0xea, 0xa2, 0x61, 0xcf, 0xf4, 0x6b, 0x22, 0x8f, 0x4a, 0x3e,
+-      0x31, 0x2c, 0x73, 0x6e, 0x97, 0x56, 0x38, 0xd9, 0xa9, 0x8d, 0x9c, 0x24,
+-      0x2d, 0x9e, 0x8c, 0xdb, 0xe9, 0x54, 0x21, 0x96, 0x36, 0x47, 0x62, 0x92,
+-      0xdf, 0x03, 0xb9, 0x55, 0x9d, 0xa4, 0xe4, 0x4d, 0xc9, 0x1f, 0xb5, 0x0c,
+-      0xc8, 0x53, 0x93, 0x58, 0x8e, 0x7c, 0x6e, 0xe1, 0x1c, 0x5a, 0x9b, 0x2c,
+-      0xd4, 0x6c, 0x29, 0x3b, 0xf3, 0x5a, 0x39, 0xa1, 0x51, 0x04, 0x18, 0x0f,
+-      0x60, 0xfc, 0x67, 0xc1, 0xf8, 0x4b, 0x52, 0x3e, 0x25, 0xf9, 0xc9, 0x59,
+-      0xcf, 0x2b, 0xd8, 0x7f, 0x1c, 0xcc, 0x0d, 0x63, 0x4e, 0x97, 0xd8, 0x8f,
+-      0x38, 0x37, 0x1b, 0xcc, 0x51, 0x1e, 0x9e, 0x8c, 0xd8, 0x14, 0x23, 0xe8,
+-      0x35, 0x8b, 0xe8, 0x9b, 0xd1, 0x73, 0x8f, 0x8d, 0x9b, 0xfc, 0xff, 0x03,
+-      0xe2, 0xf9, 0x26, 0xf0, 0x6c, 0x83, 0x66, 0x89, 0x7f, 0x36, 0x77, 0xf4,
+-      0xe0, 0x3f, 0xf4, 0xad, 0x8d, 0xf5, 0xdc, 0x7b, 0x52, 0xa8, 0x69, 0x4a,
+-      0x57, 0x34, 0x3c, 0xf7, 0xd4, 0x9f, 0xea, 0xf4, 0xf5, 0xc2, 0x69, 0x97,
+-      0x56, 0xc8, 0xc9, 0x21, 0xfd, 0x29, 0xd0, 0xbf, 0x49, 0xb6, 0xfc, 0x90,
+-      0x3c, 0xf4, 0xa7, 0x74, 0xc9, 0xa7, 0x0d, 0xb1, 0x65, 0xd1, 0x35, 0xb4,
+-      0x11, 0x27, 0x2f, 0x7a, 0xce, 0x4a, 0x96, 0x45, 0x97, 0x52, 0x22, 0x2f,
+-      0xcf, 0x64, 0xd3, 0xc3, 0x15, 0x49, 0x49, 0x79, 0xc8, 0x96, 0x65, 0x17,
+-      0x90, 0x89, 0x8a, 0x5c, 0xcd, 0xa6, 0xed, 0xcb, 0xb2, 0x51, 0x56, 0x4c,
+-      0x5b, 0x4e, 0xbb, 0x71, 0x79, 0xeb, 0xe4, 0x3e, 0xf9, 0x96, 0xc3, 0x73,
+-      0x92, 0xfe, 0x26, 0x79, 0x5a, 0x96, 0xb2, 0x4f, 0x5f, 0x5b, 0xb2, 0x8f,
+-      0xb7, 0x49, 0x3b, 0x75, 0xb0, 0xd6, 0xee, 0xd3, 0xfd, 0x15, 0xf0, 0x96,
+-      0x87, 0x6c, 0xdb, 0x21, 0x33, 0x43, 0xf1, 0x55, 0x78, 0xb0, 0x13, 0x3d,
+-      0xd7, 0xfd, 0xfd, 0x16, 0xe8, 0x83, 0x2d, 0x5a, 0x48, 0x63, 0x93, 0x14,
+-      0xba, 0xb8, 0xe6, 0x25, 0xe0, 0xc0, 0xfb, 0x55, 0xda, 0x6f, 0xd3, 0x0a,
+-      0xa7, 0xda, 0xc5, 0xf8, 0xd1, 0x9d, 0x38, 0x4f, 0x43, 0x1e, 0x19, 0xf2,
+-      0xbc, 0xaf, 0xdb, 0x46, 0x6a, 0x42, 0x72, 0xa4, 0x5d, 0x36, 0x1f, 0xdf,
+-      0x2a, 0x73, 0x66, 0x5c, 0x12, 0xc7, 0xc3, 0xbd, 0x5a, 0x82, 0xf3, 0xf9,
+-      0x32, 0xf1, 0xa7, 0x52, 0xfa, 0xa6, 0x60, 0x1c, 0xd2, 0x34, 0x8a, 0x33,
+-      0xea, 0x35, 0x7b, 0xf4, 0x21, 0x2d, 0xaf, 0xfe, 0x8f, 0x6a, 0x2c, 0x18,
+-      0xef, 0xd2, 0xbe, 0x6a, 0x74, 0x89, 0x61, 0xcd, 0x43, 0xae, 0x86, 0x5c,
+-      0x74, 0xc2, 0xf9, 0xb8, 0xf8, 0x70, 0x94, 0xb3, 0x0c, 0xae, 0xc9, 0x59,
+-      0x06, 0x7b, 0xea, 0x4f, 0x07, 0x38, 0xf3, 0x01, 0xec, 0x06, 0xc9, 0x27,
+-      0xdb, 0x78, 0xa6, 0x01, 0xec, 0x75, 0xf9, 0xce, 0x50, 0xfa, 0x0c, 0xff,
+-      0x57, 0x6b, 0x6d, 0x0d, 0xdf, 0xdb, 0x32, 0xef, 0xaa, 0x35, 0xc9, 0xfb,
+-      0x70, 0xb6, 0xa5, 0xe4, 0x1d, 0xe6, 0x82, 0x1e, 0xd3, 0xf2, 0x09, 0xe2,
+-      0x6a, 0x96, 0xc7, 0x13, 0xbd, 0x18, 0x6b, 0x52, 0xfe, 0x12, 0xf5, 0xf5,
+-      0x13, 0xf1, 0xe7, 0x39, 0x97, 0x3e, 0xda, 0xab, 0x1f, 0x03, 0x7d, 0x94,
+-      0x41, 0x3a, 0x29, 0x10, 0x7e, 0x79, 0xe8, 0x36, 0xf0, 0x67, 0xa2, 0x0f,
+-      0xf9, 0xdf, 0x2c, 0xf9, 0x22, 0xe9, 0x57, 0x76, 0x0a, 0x39, 0x27, 0xb1,
+-      0xdf, 0xdd, 0xb0, 0xc9, 0xf5, 0xf6, 0x0a, 0x1b, 0x6d, 0xa7, 0xad, 0x7e,
+-      0x11, 0x3c, 0xa7, 0x33, 0x22, 0x16, 0xe4, 0x95, 0x94, 0x66, 0x6b, 0x1a,
+-      0x3c, 0x51, 0x2f, 0xb7, 0x61, 0x7e, 0xc3, 0xc7, 0x79, 0xc5, 0x7a, 0x38,
+-      0xf7, 0x41, 0x20, 0xcb, 0x7d, 0x32, 0xe1, 0xec, 0x57, 0x3c, 0x57, 0xf5,
+-      0xcb, 0x92, 0xef, 0xee, 0x35, 0xa7, 0x40, 0x6f, 0xc1, 0x48, 0xcf, 0x55,
+-      0x24, 0x29, 0x0b, 0xf0, 0x13, 0x2f, 0xc2, 0xe6, 0x5f, 0x71, 0x53, 0xb0,
+-      0xaf, 0xbc, 0x3c, 0xea, 0xe4, 0x64, 0xe2, 0x14, 0x6d, 0x2c, 0x9d, 0x29,
+-      0xc4, 0x72, 0x32, 0xef, 0xa4, 0x33, 0x0b, 0xd0, 0xbd, 0x05, 0xc7, 0xf3,
+-      0xa6, 0xec, 0xfe, 0xd4, 0x28, 0x30, 0x5e, 0x74, 0x76, 0x24, 0x27, 0x20,
+-      0xc8, 0x25, 0x2b, 0x25, 0x4b, 0x6e, 0x06, 0x3a, 0x86, 0xf7, 0xae, 0x85,
+-      0x7e, 0x00, 0x3a, 0x9e, 0x85, 0x7d, 0x93, 0x16, 0x53, 0x16, 0xfb, 0x20,
+-      0x3b, 0x47, 0x07, 0x2e, 0x4d, 0xf2, 0xfb, 0x6f, 0x40, 0xbe, 0x21, 0xdf,
+-      0x77, 0x81, 0xb6, 0x04, 0x70, 0x92, 0xae, 0xdb, 0xa4, 0xda, 0x05, 0xf9,
+-      0x0d, 0x25, 0x94, 0x5d, 0x16, 0x3a, 0xb7, 0x4a, 0xe1, 0x8e, 0x66, 0xbc,
+-      0xef, 0xc2, 0x98, 0xf2, 0x6f, 0xc1, 0x1c, 0xdf, 0xff, 0x4b, 0x60, 0x5f,
+-      0x4d, 0xeb, 0xc6, 0x57, 0xd1, 0xb7, 0xcb, 0x36, 0x8b, 0xbd, 0x89, 0xfe,
+-      0x9f, 0xd1, 0x77, 0xa2, 0xef, 0xc5, 0x5e, 0xe7, 0x21, 0x43, 0xca, 0x0f,
+-      0xcf, 0x0b, 0x5c, 0xb3, 0x3d, 0xd8, 0x97, 0x78, 0xdb, 0x81, 0x67, 0x53,
+-      0xb0, 0x57, 0x3b, 0xc6, 0xad, 0xc1, 0x5e, 0x16, 0x68, 0x8e, 0x29, 0x19,
+-      0x16, 0xac, 0xf8, 0xba, 0xb1, 0x86, 0x3e, 0x0e, 0xdc, 0x84, 0xd7, 0xe5,
+-      0x4a, 0x57, 0x17, 0x9e, 0xb9, 0x27, 0x61, 0xf8, 0x1e, 0xbd, 0x4b, 0xfc,
+-      0x1c, 0xe7, 0xe5, 0x09, 0x07, 0xfe, 0x89, 0xfa, 0xe6, 0x52, 0x8e, 0xbb,
+-      0x65, 0x02, 0xbc, 0x8f, 0x3b, 0xe9, 0x99, 0xaa, 0xee, 0x79, 0x7a, 0xd6,
+-      0x30, 0xab, 0x92, 0x86, 0x1d, 0x8f, 0xc9, 0x38, 0xe4, 0x77, 0xda, 0x89,
+-      0xcb, 0x45, 0x65, 0x7b, 0xe4, 0xe9, 0x21, 0xc8, 0x05, 0xf1, 0xa4, 0x8b,
+-      0xf6, 0x49, 0x9b, 0x82, 0xfc, 0x8a, 0xa6, 0x5c, 0xca, 0xd2, 0x96, 0xb3,
+-      0xb2, 0xbc, 0x6a, 0xcb, 0x15, 0xd8, 0x32, 0xed, 0xb8, 0x02, 0x7b, 0xf6,
+-      0xf5, 0xfa, 0x41, 0xd9, 0x06, 0xbd, 0x4e, 0x62, 0x3f, 0xea, 0xf5, 0xb3,
+-      0xd0, 0x6b, 0xc8, 0xd4, 0x86, 0xae, 0x9b, 0xd4, 0x89, 0x6f, 0xc3, 0xa7,
+-      0x81, 0xdf, 0x44, 0xf0, 0xbc, 0xfc, 0x5d, 0x29, 0x9c, 0x6a, 0x05, 0xdd,
+-      0x7b, 0xdb, 0x29, 0xb3, 0xf2, 0x32, 0x7f, 0xa1, 0x2e, 0x3e, 0x05, 0xf9,
+-      0xc1, 0x8f, 0x2a, 0x1d, 0x04, 0x6f, 0xd9, 0x3d, 0x80, 0x19, 0xc6, 0x39,
+-      0xb7, 0x02, 0x3f, 0x69, 0xbc, 0x15, 0x1c, 0xdf, 0x83, 0xee, 0x2c, 0xf5,
+-      0x15, 0xf3, 0x0b, 0xe1, 0x79, 0xb7, 0xa9, 0x3d, 0xcb, 0x43, 0xad, 0x01,
+-      0x7f, 0x94, 0x03, 0xf5, 0x3e, 0x09, 0xbd, 0xd5, 0x64, 0x5c, 0xe9, 0x6e,
+-      0x5e, 0xc9, 0x61, 0xde, 0xa1, 0xfe, 0x02, 0x87, 0x4d, 0x19, 0x98, 0x72,
+-      0xbf, 0x82, 0x4f, 0xae, 0xd9, 0x77, 0x37, 0x69, 0xe7, 0x78, 0x83, 0xf4,
+-      0x28, 0x1f, 0xd4, 0x1d, 0xe8, 0x76, 0x13, 0x6c, 0x9f, 0xef, 0x1e, 0x92,
+-      0xc7, 0xdc, 0x61, 0x9c, 0x43, 0x52, 0x0e, 0xba, 0xdd, 0xf2, 0xfb, 0xee,
+-      0x46, 0xb9, 0xdc, 0x09, 0xba, 0x56, 0x6d, 0xec, 0x6e, 0xf9, 0x03, 0xc6,
+-      0x3c, 0xf5, 0x0c, 0x3f, 0xa9, 0xdf, 0x05, 0x1a, 0x68, 0x4f, 0xb4, 0x2b,
+-      0xc2, 0xc5, 0xa4, 0xa4, 0xf6, 0xfc, 0x89, 0xef, 0xdb, 0x80, 0x77, 0xae,
+-      0x93, 0xf6, 0x4b, 0xda, 0x8c, 0xc0, 0x66, 0xd3, 0x66, 0x49, 0xc8, 0x33,
+-      0x69, 0xe5, 0x73, 0xa3, 0x2c, 0xd8, 0x37, 0xca, 0x20, 0xc4, 0x13, 0xda,
+-      0xe5, 0xa8, 0xe4, 0x5d, 0xf6, 0xf4, 0x97, 0x88, 0x91, 0x0e, 0x62, 0xa4,
+-      0x83, 0xd8, 0x08, 0x5b, 0x78, 0xc5, 0x41, 0x6c, 0x74, 0x10, 0x1b, 0xe1,
+-      0xcf, 0x5e, 0x72, 0x10, 0x1f, 0xa1, 0x43, 0x2f, 0x38, 0x8c, 0xeb, 0xdf,
+-      0x46, 0x4c, 0x35, 0xe4, 0x99, 0x9a, 0xc8, 0x91, 0x5a, 0x1a, 0xd4, 0xa5,
+-      0x87, 0x3f, 0x90, 0xfe, 0xcc, 0x07, 0x92, 0xb6, 0x2f, 0xe2, 0xf7, 0x96,
+-      0xe0, 0x9d, 0xca, 0x11, 0xf0, 0xbe, 0x1e, 0xe6, 0x13, 0x38, 0x7f, 0x8b,
+-      0x39, 0x83, 0x3f, 0x0f, 0x97, 0x88, 0xb8, 0x41, 0x9b, 0x1e, 0x93, 0xf9,
+-      0x59, 0xda, 0xf2, 0xed, 0x38, 0x8b, 0x4e, 0x99, 0xb2, 0xfc, 0x71, 0xc1,
+-      0xbe, 0xc3, 0x1c, 0xa5, 0xee, 0x98, 0x31, 0xd0, 0x76, 0x1b, 0x7e, 0x29,
+-      0xc4, 0xda, 0x3f, 0xd2, 0x0a, 0x0b, 0x71, 0xc4, 0x56, 0xc6, 0x5b, 0xc9,
+-      0xfb, 0x7a, 0x74, 0xc3, 0x1b, 0x5f, 0x5d, 0xd3, 0x0f, 0xfd, 0x86, 0xdc,
+-      0x13, 0x09, 0xc0, 0xcc, 0x6a, 0x23, 0xcb, 0x6f, 0xfb, 0x76, 0x92, 0xe5,
+-      0xf8, 0x46, 0x60, 0x7b, 0xdc, 0x1f, 0x63, 0x97, 0x78, 0xf9, 0x4c, 0x9c,
+-      0x97, 0x91, 0x1f, 0x24, 0x91, 0x17, 0x24, 0xe0, 0x7b, 0x98, 0x73, 0x74,
+-      0x23, 0x3f, 0xf0, 0xbc, 0x17, 0x6d, 0xcf, 0x7b, 0x07, 0xbf, 0x7f, 0xb7,
+-      0x57, 0x79, 0x40, 0xab, 0x68, 0xa3, 0x6e, 0x4a, 0x46, 0xdd, 0x9f, 0xb6,
+-      0xfb, 0x72, 0x8c, 0xcb, 0xa4, 0x93, 0x90, 0x29, 0xa7, 0xa6, 0xdd, 0xb7,
+-      0x3c, 0xad, 0x15, 0x97, 0x67, 0xb0, 0xaf, 0x81, 0x39, 0xa9, 0x54, 0xed,
+-      0x33, 0xda, 0x88, 0x7b, 0x54, 0xbb, 0x7f, 0xb9, 0x5d, 0xd9, 0x79, 0xd5,
+-      0x61, 0xce, 0x70, 0x5d, 0xe5, 0x2e, 0x05, 0x2b, 0x6d, 0xfe, 0x2e, 0x14,
+-      0xaf, 0x50, 0x23, 0xdd, 0xcd, 0x01, 0xcd, 0xb0, 0xc3, 0x9c, 0x77, 0xb8,
+-      0x90, 0xb5, 0x60, 0x8b, 0xa4, 0x51, 0xcd, 0x5d, 0xf0, 0xe9, 0x3e, 0xad,
+-      0x15, 0x96, 0xdb, 0xb4, 0x91, 0x53, 0x8c, 0xc7, 0xd2, 0x1d, 0x13, 0xae,
+-      0xdb, 0x01, 0x7b, 0xad, 0x63, 0x0f, 0xe6, 0x5b, 0x94, 0x2d, 0xe8, 0x86,
+-      0x0e, 0xbf, 0x04, 0x7a, 0x5e, 0x54, 0xf9, 0x0f, 0xf9, 0x4b, 0xe1, 0xac,
+-      0x42, 0xfe, 0x3c, 0xef, 0xaf, 0xed, 0x90, 0xfe, 0x74, 0x2a, 0xaf, 0x87,
+-      0xfc, 0x7a, 0xde, 0xbf, 0xd9, 0xe4, 0x99, 0x3c, 0x79, 0xde, 0x0b, 0x76,
+-      0x02, 0xf4, 0x7b, 0x17, 0x74, 0xab, 0x06, 0x7e, 0x18, 0xdb, 0x29, 0xf3,
+-      0x69, 0xf0, 0x71, 0x14, 0x3c, 0x9e, 0x06, 0x7f, 0x33, 0xa0, 0xe5, 0x37,
+-      0xed, 0xd9, 0x98, 0x4b, 0x4a, 0x8a, 0xb2, 0x2e, 0x2f, 0x32, 0xa7, 0x64,
+-      0x1e, 0x69, 0x4a, 0x69, 0x31, 0x5c, 0x1f, 0xea, 0xc3, 0x01, 0xd9, 0xeb,
+-      0x74, 0x42, 0x3e, 0x94, 0xe7, 0x35, 0xd0, 0x4b, 0x9f, 0x5f, 0xcd, 0xe8,
+-      0x08, 0x80, 0x65, 0x1b, 0xb1, 0x5e, 0x46, 0x94, 0x2e, 0x2c, 0x5a, 0x92,
+-      0x2f, 0xdb, 0x26, 0xed, 0x36, 0x55, 0xb6, 0x2b, 0xc8, 0x0c, 0x7c, 0x39,
+-      0x8e, 0xd4, 0x0c, 0xbc, 0xe3, 0x58, 0x60, 0xf3, 0xa1, 0x6c, 0x0d, 0xd8,
+-      0x5d, 0x28, 0xf3, 0x70, 0xee, 0xc1, 0x0e, 0xfa, 0xcc, 0x79, 0xf7, 0x0b,
+-      0xc0, 0x41, 0xbc, 0xbf, 0x09, 0x47, 0x1c, 0x31, 0x84, 0x78, 0xe2, 0x72,
+-      0xc6, 0x21, 0x3c, 0xf3, 0x8b, 0xb8, 0xb4, 0x22, 0x26, 0x6f, 0xc8, 0x89,
+-      0xf6, 0xf9, 0x1d, 0x69, 0x73, 0x31, 0x16, 0x93, 0x63, 0x09, 0xb9, 0xc3,
+-      0x60, 0x00, 0xd8, 0xec, 0x67, 0xea, 0x85, 0x19, 0x0d, 0xba, 0xdc, 0x26,
+-      0x93, 0x03, 0x69, 0x73, 0x1e, 0x7b, 0xe8, 0xd8, 0xe3, 0x6b, 0x9c, 0xaf,
+-      0xfd, 0x87, 0x57, 0x4a, 0xec, 0x84, 0x9d, 0x48, 0xdc, 0xc8, 0x19, 0x83,
+-      0x53, 0xb5, 0x03, 0xc2, 0xfc, 0x6a, 0x72, 0x60, 0x03, 0xec, 0xbc, 0x77,
+-      0x78, 0xaf, 0x30, 0x97, 0x8f, 0x0f, 0x8e, 0x5b, 0x3e, 0x5d, 0x23, 0xb0,
+-      0xeb, 0x49, 0xe4, 0x79, 0x7b, 0xeb, 0xcc, 0x01, 0x8c, 0xc1, 0xde, 0xba,
+-      0x21, 0x47, 0x60, 0xaf, 0xcd, 0xd0, 0x9f, 0x15, 0xa5, 0xcb, 0x26, 0x64,
+-      0x4d, 0xdf, 0x3a, 0x0c, 0xdc, 0xef, 0x40, 0x6e, 0x16, 0x62, 0x67, 0x37,
+-      0xf2, 0xd9, 0x0c, 0xce, 0x33, 0x85, 0xd8, 0xd7, 0xa8, 0xd7, 0x12, 0xdf,
+-      0x0a, 0xb8, 0x57, 0x76, 0x32, 0x2f, 0xf3, 0xbc, 0x07, 0xac, 0xf4, 0xb3,
+-      0xe4, 0x65, 0xca, 0x91, 0x7c, 0xd5, 0x56, 0xbe, 0x10, 0x3a, 0x9b, 0x62,
+-      0x3e, 0x07, 0xfd, 0x83, 0x4e, 0x16, 0x39, 0x5e, 0xd5, 0xc1, 0xe4, 0xa4,
+-      0xcc, 0x43, 0x76, 0x62, 0x16, 0xb2, 0x84, 0x0d, 0xe1, 0x5a, 0x02, 0xdd,
+-      0xf6, 0xbc, 0x18, 0x74, 0x77, 0x3c, 0x4b, 0x38, 0xa9, 0x28, 0x9b, 0x83,
+-      0xcc, 0x26, 0xdd, 0x5d, 0x1d, 0x7e, 0x3e, 0x09, 0x5f, 0x99, 0xe0, 0x5e,
+-      0x9f, 0x85, 0x0e, 0x77, 0x23, 0x86, 0x78, 0x1e, 0x6c, 0x38, 0xa1, 0x0b,
+-      0x75, 0x18, 0xf6, 0xe2, 0xf2, 0x5d, 0x1b, 0xe6, 0xc5, 0x9c, 0x84, 0x4f,
+-      0x2b, 0x99, 0x9e, 0x77, 0x0f, 0x68, 0xa9, 0xda, 0x1d, 0x58, 0xd7, 0x24,
+-      0x08, 0x7b, 0xa6, 0xbf, 0xdf, 0x46, 0x15, 0x3b, 0x30, 0x6e, 0xc7, 0x7e,
+-      0x9b, 0x98, 0x7b, 0x4e, 0xd2, 0x16, 0xb2, 0xb4, 0x7d, 0x23, 0xf0, 0xe7,
+-      0x6f, 0x82, 0x4e, 0xae, 0x51, 0x70, 0xf1, 0xa6, 0x5c, 0x56, 0x96, 0x6a,
+-      0xdb, 0x65, 0x6e, 0x3f, 0xf7, 0xe8, 0xa6, 0x1d, 0x22, 0xfe, 0xf3, 0x99,
+-      0x74, 0xd3, 0x8f, 0x74, 0x06, 0x63, 0xed, 0x73, 0xfe, 0x1e, 0x62, 0x32,
+-      0xdf, 0x1d, 0x51, 0xf4, 0x8a, 0x7e, 0xd1, 0xde, 0xe8, 0xc7, 0xa8, 0x5c,
+-      0xbb, 0x76, 0x0f, 0x72, 0xf0, 0xbd, 0xbb, 0xa9, 0x03, 0x86, 0x5c, 0xb2,
+-      0x3c, 0xef, 0x92, 0xdd, 0x04, 0xfe, 0x74, 0x69, 0xb2, 0x8e, 0x9b, 0xd2,
+-      0x0a, 0x99, 0x3b, 0x5a, 0x20, 0x97, 0x36, 0x25, 0x97, 0x49, 0x15, 0xf7,
+-      0xde, 0xc5, 0xd9, 0x70, 0x6d, 0x45, 0xc5, 0x97, 0x82, 0x5a, 0xc7, 0x35,
+-      0x3c, 0xd3, 0x77, 0x91, 0x73, 0x1f, 0xc3, 0xda, 0x98, 0xb4, 0x28, 0xdd,
+-      0x66, 0xfc, 0x27, 0xaf, 0xd2, 0xe1, 0xe3, 0x61, 0xac, 0xa5, 0x0e, 0x87,
+-      0xfc, 0x8f, 0x06, 0x3c, 0x12, 0xaf, 0x0d, 0xbc, 0x6d, 0xaa, 0xce, 0x28,
+-      0xfb, 0xe7, 0xd7, 0x11, 0x53, 0xf2, 0x40, 0x5d, 0x94, 0x0b, 0x7d, 0x21,
+-      0x41, 0x43, 0xba, 0x9f, 0xc1, 0x3e, 0xa4, 0x61, 0x13, 0xf2, 0x5e, 0xd1,
+-      0xaa, 0xe4, 0xcb, 0x0c, 0xf7, 0x11, 0x3d, 0x96, 0x6b, 0x91, 0x11, 0x68,
+-      0x5d, 0xd5, 0xb1, 0xcc, 0x07, 0xa0, 0x7b, 0x5f, 0x07, 0x8f, 0x85, 0x19,
+-      0xfa, 0xaa, 0x2f, 0x61, 0xdd, 0x4a, 0x5a, 0xf7, 0xb7, 0x95, 0x23, 0x0e,
+-      0x65, 0xfa, 0x0e, 0x64, 0xaa, 0x77, 0x35, 0x4b, 0x87, 0x14, 0x91, 0x4f,
+-      0xcd, 0x0f, 0x83, 0xaf, 0x81, 0x36, 0x89, 0xed, 0xa2, 0xaf, 0x42, 0xed,
+-      0x93, 0x58, 0x41, 0x60, 0xb8, 0xee, 0xe9, 0x3b, 0xb1, 0x7e, 0x20, 0x01,
+-      0xf9, 0x52, 0x66, 0x7a, 0x00, 0x47, 0x18, 0x14, 0x4a, 0x66, 0xa1, 0xb3,
+-      0x59, 0x88, 0x9b, 0xef, 0xfa, 0x93, 0xa6, 0x70, 0x1e, 0x3e, 0xbd, 0xc8,
+-      0xb5, 0xa4, 0xd9, 0x5f, 0xd3, 0x64, 0x85, 0xb2, 0xfe, 0x2b, 0xf8, 0xa7,
+-      0x5f, 0x79, 0x7b, 0x87, 0xc2, 0xf7, 0xe4, 0x87, 0x7c, 0xe1, 0x0c, 0x41,
+-      0xd3, 0xe6, 0x9c, 0x25, 0x83, 0xd3, 0xa2, 0x15, 0x90, 0x7b, 0x50, 0x47,
+-      0x7a, 0x86, 0xd2, 0x95, 0x94, 0xbe, 0x0d, 0xbc, 0x1a, 0xb2, 0x7f, 0x88,
+-      0xfc, 0x6e, 0x0d, 0xf2, 0x8e, 0x46, 0x9e, 0x3b, 0x02, 0x9e, 0xd5, 0x7e,
+-      0xc3, 0x79, 0x7d, 0x8d, 0xf7, 0xd1, 0x99, 0x70, 0x5f, 0x03, 0xb6, 0xbc,
+-      0x82, 0x9a, 0x87, 0xfb, 0x93, 0x9e, 0x1b, 0x9e, 0x6e, 0x59, 0x95, 0x1e,
+-      0xfd, 0x57, 0xde, 0xfd, 0x43, 0x9a, 0xca, 0xd3, 0x74, 0xe4, 0x8c, 0xfa,
+-      0x10, 0x78, 0x1d, 0xe2, 0x79, 0xe9, 0x72, 0xff, 0x6e, 0xe2, 0x3b, 0x42,
+-      0xde, 0x80, 0xb3, 0xd5, 0xaf, 0x61, 0x86, 0xc2, 0x3d, 0x1a, 0xf5, 0x27,
+-      0xc4, 0x49, 0x5c, 0x84, 0xe1, 0x99, 0xd0, 0xdf, 0x4a, 0xbc, 0x60, 0xc7,
+-      0x83, 0xb3, 0x0e, 0xd7, 0x89, 0x66, 0x58, 0xeb, 0xd7, 0xc1, 0x68, 0x1f,
+-      0xa4, 0xde, 0xf5, 0x04, 0x76, 0x16, 0xea, 0x21, 0xf7, 0x64, 0x7f, 0x2b,
+-      0x9d, 0xe5, 0x3a, 0xae, 0x27, 0x3c, 0x61, 0xe0, 0x33, 0xe0, 0x83, 0x7e,
+-      0x06, 0xdb, 0x78, 0xf9, 0x26, 0x5f, 0xce, 0xd8, 0x4e, 0x1f, 0x63, 0xaf,
+-      0xf7, 0xe7, 0xac, 0x7d, 0xf0, 0xac, 0xc3, 0x7e, 0x1b, 0xfd, 0x3a, 0xe7,
+-      0x50, 0x4f, 0x2c, 0x8e, 0xa2, 0xb7, 0x64, 0xed, 0x1e, 0x80, 0x7e, 0x3e,
+-      0xac, 0xe7, 0xdb, 0x4a, 0x46, 0x8e, 0x35, 0xbd, 0x14, 0xab, 0xb5, 0xc3,
+-      0x88, 0xc9, 0x52, 0xb9, 0x4d, 0xd5, 0xc6, 0x6d, 0xc3, 0x85, 0x2c, 0xe6,
+-      0xea, 0x8c, 0xcb, 0x30, 0x7f, 0xac, 0x43, 0x6c, 0x88, 0xeb, 0xd3, 0xf1,
+-      0xca, 0xed, 0x39, 0xda, 0x49, 0x4a, 0x52, 0xf5, 0x6b, 0x88, 0x79, 0xc8,
+-      0x1f, 0x95, 0x0e, 0x7d, 0xf1, 0x76, 0xd2, 0x5f, 0x45, 0xec, 0x32, 0x72,
+-      0x62, 0xe8, 0xb9, 0xe6, 0xf8, 0x64, 0xb6, 0x0d, 0xb1, 0x7e, 0x6c, 0xbb,
+-      0x7e, 0x6e, 0xdf, 0xf6, 0xd8, 0xb9, 0xae, 0x52, 0x53, 0xae, 0xb2, 0x5d,
+-      0x9f, 0x86, 0x2f, 0xaf, 0x89, 0x8e, 0x98, 0x8a, 0x1a, 0x01, 0xe3, 0x73,
+-      0x0f, 0x3c, 0xa0, 0xe7, 0x62, 0x52, 0x4e, 0xc8, 0x93, 0x8b, 0x59, 0xf8,
+-      0xf5, 0x5a, 0x3a, 0x55, 0x94, 0x27, 0xa5, 0x5a, 0x3b, 0x24, 0x93, 0xb5,
+-      0xf0, 0xde, 0x80, 0x77, 0x06, 0x49, 0xe5, 0xbf, 0xe8, 0x5f, 0x27, 0x03,
+-      0xda, 0x41, 0x73, 0x7e, 0x84, 0x31, 0x3a, 0x4b, 0xdf, 0x7d, 0x0d, 0x3a,
+-      0xd1, 0x12, 0xd4, 0xda, 0xbe, 0xfe, 0x19, 0xb9, 0x8f, 0x30, 0x47, 0xfd,
+-      0xdb, 0xb0, 0x7a, 0x6e, 0x7b, 0x4e, 0xfd, 0x89, 0x8a, 0xa9, 0x4b, 0x36,
+-      0x9f, 0x09, 0xf3, 0xf6, 0xe0, 0x94, 0x75, 0xdd, 0x64, 0x6d, 0x70, 0xc1,
+-      0x21, 0x3e, 0x53, 0x9d, 0xb5, 0x91, 0xbb, 0x8c, 0xb5, 0xad, 0xa4, 0x0b,
+-      0xcd, 0xc0, 0x3c, 0xf6, 0x77, 0x9a, 0x83, 0x71, 0xb8, 0xf6, 0xb5, 0x86,
+-      0xb5, 0x9c, 0x63, 0x4f, 0xdc, 0xd8, 0xa3, 0xe1, 0xce, 0xe4, 0x82, 0x9b,
+-      0x51, 0x35, 0x7b, 0xc1, 0x55, 0xb9, 0x02, 0x6a, 0x74, 0xe8, 0x93, 0xba,
+-      0x43, 0x81, 0x3f, 0x72, 0xff, 0xce, 0xf4, 0xcf, 0x9d, 0xfe, 0x63, 0x45,
+-      0x18, 0xdf, 0xa8, 0x6f, 0x53, 0xca, 0x4f, 0xbd, 0xd9, 0x70, 0x17, 0xf0,
+-      0x26, 0xfc, 0xd2, 0x9d, 0x9b, 0xfd, 0x9a, 0xc6, 0x0c, 0x7c, 0x5a, 0xab,
+-      0xca, 0x53, 0x7c, 0x9f, 0x96, 0x6a, 0x80, 0x4d, 0xf1, 0xde, 0xa0, 0xc3,
+-      0xaf, 0xbd, 0x7f, 0x2b, 0x58, 0xc3, 0xfc, 0xc1, 0x32, 0x99, 0x3b, 0xf8,
+-      0xb2, 0xf0, 0x9e, 0x59, 0x1d, 0x27, 0x4a, 0x01, 0xbe, 0xa6, 0xe0, 0xdd,
+-      0x5b, 0x6d, 0x3e, 0x4d, 0xe1, 0xda, 0x3f, 0x0d, 0xee, 0xa6, 0x94, 0x2f,
+-      0xcc, 0x03, 0x16, 0x3c, 0xa4, 0x4a, 0x3a, 0xf4, 0x66, 0xa4, 0xee, 0xcb,
+-      0x1b, 0xf1, 0x8e, 0xf7, 0x4f, 0x8a, 0xb6, 0x0b, 0x2a, 0xe7, 0x68, 0xe4,
+-      0x3f, 0x4f, 0xbe, 0xf3, 0x06, 0x69, 0x74, 0xc7, 0xb0, 0x56, 0x0e, 0xf8,
+-      0x77, 0x14, 0xa6, 0x4c, 0x98, 0xfd, 0xe6, 0x24, 0xf1, 0x26, 0x04, 0xf8,
+-      0x90, 0x97, 0xe4, 0xc2, 0x33, 0xfc, 0x26, 0xf7, 0x06, 0xde, 0x8d, 0x1c,
+-      0xa3, 0xff, 0x66, 0x40, 0xcb, 0x8f, 0x03, 0x79, 0x85, 0xef, 0x7f, 0xb1,
+-      0xf9, 0xe6, 0xf1, 0x3d, 0xb7, 0x07, 0xf2, 0xc4, 0xf3, 0xa1, 0x5f, 0x43,
+-      0x13, 0xf5, 0xfd, 0x34, 0xf0, 0xa8, 0x18, 0x5c, 0xd1, 0x73, 0x88, 0xf9,
+-      0x59, 0x64, 0x34, 0x35, 0xd8, 0xb4, 0x20, 0xf6, 0xbb, 0x69, 0xbb, 0x84,
+-      0x55, 0x1f, 0xd5, 0xe8, 0x57, 0xaf, 0xc3, 0xaf, 0xf2, 0xac, 0x3f, 0x96,
+-      0xa9, 0x5a, 0xaf, 0xdd, 0xac, 0xa9, 0xfc, 0x3a, 0x73, 0x5a, 0xfa, 0xed,
+-      0xd3, 0xc8, 0x3d, 0x50, 0xa3, 0xa5, 0x8e, 0x08, 0x65, 0x7e, 0x5d, 0x76,
+-      0xa8, 0x9c, 0xe0, 0x63, 0xb1, 0x20, 0x93, 0x22, 0xea, 0x04, 0x7d, 0xe8,
+-      0x5f, 0x3d, 0x95, 0xd3, 0x68, 0xa8, 0x42, 0x6f, 0x81, 0xeb, 0x6d, 0x85,
+-      0x87, 0xf8, 0x1a, 0x71, 0x69, 0xd2, 0x32, 0x14, 0xe2, 0x4b, 0xc9, 0x51,
+-      0x37, 0xc4, 0x69, 0xc8, 0x65, 0x64, 0x2d, 0xfa, 0x90, 0x17, 0xf0, 0xcf,
+-      0xe7, 0x5f, 0x7a, 0xcc, 0x09, 0xf4, 0xdc, 0xdd, 0x81, 0x0c, 0x7e, 0x8f,
+-      0x32, 0xc0, 0x18, 0x3a, 0xef, 0x7c, 0xc5, 0xaf, 0x45, 0x54, 0x2d, 0x37,
+-      0x86, 0x9a, 0x82, 0x73, 0x2b, 0x2d, 0x05, 0x3b, 0x3c, 0xe3, 0x7d, 0x98,
+-      0x2b, 0xe2, 0x47, 0xb9, 0x10, 0x66, 0x3f, 0x9e, 0xf3, 0x01, 0x9c, 0x0c,
+-      0xfb, 0x35, 0x79, 0x58, 0x8b, 0x84, 0x39, 0xa1, 0xcc, 0xe8, 0x39, 0xe6,
+-      0xef, 0x3b, 0x40, 0x2b, 0x73, 0x56, 0x9c, 0xe7, 0xaa, 0xff, 0x59, 0x85,
+-      0xa9, 0xac, 0xc1, 0xf8, 0xb9, 0xe7, 0xa8, 0x1b, 0xe6, 0xbb, 0xcc, 0x69,
+-      0xc3, 0xdc, 0x27, 0xaf, 0x15, 0x9d, 0x31, 0xed, 0x3e, 0x87, 0xf0, 0xfa,
+-      0xec, 0x66, 0xb1, 0x52, 0x3d, 0xba, 0x27, 0x23, 0x43, 0xac, 0x9d, 0x8f,
+-      0xe1, 0xcc, 0x3b, 0xa4, 0x9c, 0x41, 0x1e, 0x60, 0xde, 0x85, 0xbe, 0x19,
+-      0x73, 0x5f, 0xc6, 0x1c, 0x74, 0x23, 0xc3, 0xfc, 0x66, 0x83, 0xaa, 0x41,
+-      0x4a, 0x2a, 0x76, 0xec, 0x08, 0xf4, 0xe5, 0x89, 0x4e, 0x5f, 0x3f, 0xbe,
+-      0x87, 0xf1, 0x46, 0xcc, 0x7f, 0x03, 0xbd, 0xe7, 0xf5, 0x0c, 0x85, 0xf3,
+-      0xd4, 0xfb, 0x61, 0xcc, 0xdf, 0x09, 0x1c, 0x15, 0x3c, 0x7f, 0x0e, 0xcf,
+-      0x7f, 0xb8, 0x6e, 0xed, 0x77, 0x31, 0xae, 0x60, 0xbe, 0xb0, 0x6e, 0x3e,
+-      0xf4, 0xb3, 0xdc, 0xaf, 0xa2, 0x15, 0xdd, 0x29, 0x2d, 0xaf, 0xea, 0x88,
+-      0x63, 0xa8, 0x55, 0xe8, 0x6b, 0x59, 0xb3, 0xcc, 0x20, 0x17, 0xa7, 0x9f,
+-      0x3d, 0x88, 0x35, 0x8b, 0xd0, 0xbb, 0x56, 0x95, 0x65, 0xea, 0xca, 0x1e,
+-      0x0f, 0x1d, 0xec, 0x99, 0x63, 0x5f, 0x39, 0x68, 0xd7, 0x09, 0xc3, 0xe7,
+-      0x27, 0x0f, 0xf6, 0xd4, 0x0f, 0x01, 0x96, 0xf9, 0x7a, 0xe3, 0x1d, 0xef,
+-      0x37, 0xd6, 0xed, 0xe9, 0xd7, 0x38, 0x45, 0x75, 0x37, 0x78, 0xe8, 0x60,
+-      0x61, 0x86, 0x71, 0x9a, 0xf5, 0x26, 0xf3, 0xd2, 0xca, 0xc1, 0xf1, 0xda,
+-      0x54, 0x50, 0xd3, 0x84, 0xef, 0xf9, 0x8e, 0xf2, 0xbf, 0x15, 0x6d, 0xa4,
+-      0xab, 0x11, 0x8f, 0xca, 0x6b, 0x80, 0xe7, 0x49, 0xe0, 0x61, 0x6d, 0xa4,
+-      0xee, 0x90, 0x15, 0xbd, 0xa9, 0xb9, 0x5b, 0xd1, 0x46, 0x5c, 0xdc, 0x2b,
+-      0xc4, 0x77, 0x02, 0x75, 0xc7, 0x77, 0x48, 0x2f, 0xf0, 0x7c, 0x26, 0xc8,
+-      0x6d, 0x78, 0x37, 0x65, 0xf8, 0x77, 0x38, 0x6a, 0x1c, 0xd6, 0xbe, 0x4d,
+-      0xeb, 0x6a, 0xdf, 0xa6, 0xe0, 0x1e, 0x8b, 0xb0, 0x7a, 0x00, 0xab, 0xee,
+-      0xd0, 0x31, 0x97, 0x0a, 0xee, 0x94, 0xe3, 0xbc, 0x53, 0x6e, 0x90, 0x45,
+-      0x53, 0x20, 0x7f, 0xd2, 0x11, 0xd6, 0x2b, 0x8d, 0xf4, 0xf1, 0xbe, 0x79,
+-      0x0a, 0xef, 0xc3, 0xb3, 0x09, 0x79, 0x5f, 0xc4, 0x3c, 0xe9, 0x3d, 0x03,
+-      0xf8, 0x90, 0xde, 0x4f, 0x7b, 0xa6, 0x5c, 0x7b, 0x06, 0xbf, 0x70, 0xbf,
+-      0x50, 0x2e, 0xa4, 0xf5, 0xd7, 0xd5, 0x5a, 0xa1, 0xdf, 0x5b, 0x0c, 0x62,
+-      0x3a, 0xe9, 0xa2, 0x0f, 0xa2, 0x3f, 0x0e, 0xef, 0xc0, 0x59, 0x63, 0x33,
+-      0x56, 0xf0, 0xbc, 0x5a, 0xa0, 0x2b, 0x84, 0xd3, 0x90, 0x5f, 0xeb, 0xcc,
+-      0xc3, 0x52, 0xa8, 0x35, 0x92, 0x8f, 0xc8, 0x0f, 0xb0, 0x57, 0x3e, 0xd3,
+-      0xa4, 0xec, 0x88, 0xf7, 0x08, 0xcd, 0xb2, 0x02, 0x9d, 0xbe, 0x84, 0xfa,
+-      0x63, 0x1e, 0xb5, 0xd1, 0x12, 0xef, 0xb5, 0xeb, 0x27, 0x3b, 0x79, 0x1f,
+-      0x32, 0x65, 0xad, 0xd5, 0xf1, 0x73, 0x80, 0x59, 0xb0, 0x58, 0xeb, 0x4b,
+-      0xd0, 0x10, 0x23, 0x91, 0x67, 0x8c, 0x5b, 0xff, 0xe3, 0x95, 0x13, 0x8d,
+-      0xb0, 0xb7, 0xaa, 0xb3, 0xdb, 0xa4, 0x3a, 0x9b, 0x3e, 0x3a, 0x87, 0x7a,
+-      0x77, 0xc6, 0xd2, 0xb7, 0xe8, 0x7e, 0xad, 0x34, 0x03, 0xdf, 0xa4, 0x6a,
+-      0xad, 0x39, 0x79, 0xae, 0x93, 0x67, 0xd7, 0x64, 0xf5, 0x9b, 0x9d, 0xfa,
+-      0xef, 0x50, 0x17, 0x15, 0xe5, 0xb1, 0x13, 0x1b, 0xa4, 0x3c, 0x70, 0x1f,
+-      0x72, 0x2d, 0xc8, 0xf3, 0x44, 0x05, 0x95, 0x21, 0xf5, 0xea, 0xbd, 0x03,
+-      0xe3, 0x16, 0x6b, 0x26, 0xf1, 0xe3, 0x9a, 0xf8, 0x3c, 0xc6, 0x4e, 0xb4,
+-      0x29, 0x9f, 0xe4, 0xdf, 0x99, 0xf7, 0x9a, 0x45, 0xe4, 0x63, 0x85, 0x01,
+-      0x24, 0x8d, 0xc8, 0x5e, 0xcc, 0x9d, 0x22, 0x3d, 0xcc, 0x19, 0xe1, 0x8f,
+-      0x7b, 0xce, 0xc1, 0xcb, 0x9d, 0x20, 0xbc, 0x2e, 0xc6, 0x89, 0x98, 0x34,
+-      0x9d, 0x60, 0x9d, 0x2d, 0x5d, 0xa8, 0x51, 0x88, 0xb3, 0xc7, 0x40, 0x3f,
+-      0x8a, 0xdf, 0x1e, 0xe4, 0x51, 0x26, 0xf2, 0xda, 0x5b, 0xc0, 0x03, 0x96,
+-      0x6b, 0x6e, 0x05, 0xff, 0x6a, 0x27, 0xeb, 0xce, 0x9e, 0x73, 0x84, 0xe7,
+-      0x7d, 0x76, 0x17, 0xe8, 0xf1, 0xf7, 0x27, 0x0e, 0xe3, 0x84, 0x48, 0xef,
+-      0xb4, 0x74, 0xea, 0x6a, 0x8d, 0x21, 0xe3, 0x59, 0xbe, 0x6b, 0x03, 0xfc,
+-      0xab, 0xca, 0x3e, 0x7b, 0xd5, 0x3a, 0xff, 0xce, 0xa2, 0xbc, 0x46, 0x37,
+-      0xe6, 0x34, 0x3c, 0x23, 0x57, 0xca, 0x9a, 0xd2, 0x3b, 0xef, 0xc3, 0xf6,
+-      0x9c, 0xeb, 0xd8, 0xe2, 0xdf, 0xed, 0xf8, 0xb4, 0xf1, 0x6e, 0xb0, 0x0c,
+-      0xa9, 0x1a, 0x3b, 0x59, 0xf3, 0x13, 0x86, 0xdf, 0x52, 0xd8, 0x73, 0x2d,
+-      0xe5, 0xe7, 0xcf, 0xe9, 0xfa, 0xff, 0xa5, 0x5f, 0xeb, 0xbf, 0xe1, 0x84,
+-      0x77, 0x4b, 0xa9, 0x86, 0xbb, 0xa5, 0x74, 0xc3, 0xb7, 0x97, 0x9f, 0xb4,
+-      0x05, 0x7a, 0x27, 0x93, 0xb6, 0x27, 0xe1, 0xf7, 0xa5, 0xbd, 0x37, 0xe5,
+-      0x90, 0x19, 0x15, 0xa7, 0xc7, 0x21, 0xfb, 0x2b, 0x75, 0xd2, 0x8b, 0x98,
+-      0x53, 0x8f, 0xcb, 0xfb, 0x8b, 0xad, 0x72, 0x65, 0xce, 0xcf, 0x29, 0xaf,
+-      0xa8, 0x6f, 0x4e, 0xa6, 0x7c, 0x80, 0xc2, 0xff, 0x72, 0x3d, 0x83, 0x5f,
+-      0xa7, 0x5c, 0x5d, 0xbc, 0x39, 0xa7, 0xbc, 0xe0, 0xde, 0x0d, 0x5a, 0x3a,
+-      0x03, 0x1b, 0x46, 0xdd, 0x86, 0x18, 0x58, 0x09, 0xee, 0xea, 0x55, 0xce,
+-      0x62, 0xd0, 0x16, 0x78, 0x27, 0x1f, 0xde, 0x57, 0xf7, 0x9a, 0x17, 0x21,
+-      0xe3, 0xaf, 0x1a, 0x9d, 0xa8, 0xa3, 0x79, 0xd7, 0x16, 0xc6, 0xec, 0x30,
+-      0xf6, 0x90, 0xee, 0xb7, 0x81, 0x7b, 0x00, 0x7a, 0x4a, 0xdd, 0xb4, 0xa1,
+-      0xb3, 0xa6, 0x2c, 0xf5, 0xa5, 0x67, 0x2a, 0xc2, 0xef, 0x02, 0x59, 0xec,
+-      0xb9, 0x0c, 0xbd, 0xcc, 0x40, 0x1e, 0xcc, 0xf5, 0x28, 0x57, 0x9c, 0xed,
+-      0xf4, 0x94, 0x94, 0xdd, 0xad, 0xc0, 0x97, 0x97, 0x92, 0x3b, 0x8c, 0xbd,
+-      0x8e, 0x43, 0x6f, 0x7f, 0xb9, 0x85, 0x77, 0x99, 0xcd, 0x56, 0x16, 0x34,
+-      0xde, 0x25, 0xe3, 0x27, 0xa7, 0x64, 0xc2, 0x59, 0xfd, 0x66, 0x94, 0xe1,
+-      0xf7, 0x94, 0x45, 0xd4, 0xb4, 0xbe, 0x3d, 0xe6, 0x64, 0xfc, 0x14, 0x70,
+-      0x38, 0xac, 0x8d, 0x7b, 0xa1, 0x37, 0xfd, 0xaa, 0x36, 0x2e, 0x29, 0x9f,
+-      0xc4, 0xf9, 0xef, 0x01, 0x57, 0x6f, 0x65, 0x0f, 0xe0, 0xca, 0xa8, 0x9f,
+-      0x8b, 0xc8, 0x85, 0x17, 0x1c, 0x43, 0xca, 0x36, 0x7c, 0x6b, 0x31, 0xa9,
+-      0xeb, 0xbb, 0xba, 0x65, 0xde, 0xe9, 0x37, 0x75, 0xde, 0x3d, 0x26, 0x7c,
+-      0xdf, 0x57, 0x56, 0xf6, 0x9d, 0xd4, 0x0d, 0xab, 0x5b, 0x16, 0x9d, 0x8a,
+-      0x54, 0x07, 0x38, 0xe6, 0xf9, 0x55, 0xc4, 0xb4, 0x7c, 0x5f, 0x99, 0xd7,
+-      0x35, 0x75, 0xb7, 0x5d, 0x76, 0xd5, 0xfd, 0x68, 0xca, 0x94, 0xc3, 0xa0,
+-      0x0f, 0xcf, 0x0b, 0xd0, 0xf1, 0x69, 0xe6, 0x78, 0xfe, 0x9d, 0xf1, 0x81,
+-      0xe5, 0x22, 0x68, 0x68, 0x97, 0xde, 0x1f, 0xd3, 0xc6, 0x1e, 0xc2, 0x1c,
+-      0xc7, 0x69, 0xe8, 0xeb, 0xc3, 0x78, 0x26, 0x6c, 0x12, 0x3d, 0xe5, 0xd0,
+-      0x8d, 0xde, 0x04, 0x2d, 0xd0, 0x4b, 0xd6, 0xa5, 0xfb, 0x53, 0x32, 0x7f,
+-      0x72, 0xb7, 0x94, 0x16, 0x76, 0x03, 0xff, 0x3f, 0x22, 0xe7, 0xbf, 0x33,
+-      0xb8, 0x8b, 0x65, 0xde, 0xcf, 0x7d, 0x5e, 0xdc, 0xa2, 0x6c, 0x63, 0x9a,
+-      0xf3, 0xec, 0xf7, 0x61, 0x3d, 0xea, 0x07, 0x47, 0xdd, 0x4f, 0x03, 0x06,
+-      0x67, 0xe7, 0x36, 0x7e, 0xfb, 0xeb, 0x84, 0x9f, 0xae, 0xb0, 0x76, 0x40,
+-      0x6c, 0x99, 0x1b, 0x2c, 0xd4, 0xd2, 0x66, 0x41, 0x7d, 0x97, 0xc8, 0x88,
+-      0x1f, 0x6f, 0x38, 0x17, 0x17, 0x6b, 0x1a, 0xf5, 0x68, 0x8e, 0xef, 0x0e,
+-      0xab, 0xfb, 0x1f, 0xf5, 0x7d, 0x4e, 0xde, 0x95, 0x51, 0xe8, 0x58, 0xef,
+-      0x74, 0x06, 0x39, 0xf1, 0x7b, 0xc8, 0x27, 0x7f, 0x1e, 0xc8, 0x60, 0x38,
+-      0xd0, 0x8d, 0xd6, 0x06, 0x9d, 0xc0, 0x39, 0x3b, 0x38, 0x7b, 0x07, 0x7a,
+-      0xe0, 0xe0, 0xac, 0x57, 0xf5, 0x63, 0xb8, 0xc1, 0xe7, 0x6e, 0x92, 0xbf,
+-      0x9c, 0x49, 0x67, 0x56, 0xa0, 0x3f, 0x57, 0xc1, 0xeb, 0x0a, 0xea, 0xbc,
+-      0x2b, 0x88, 0x23, 0x0b, 0x35, 0x7e, 0x4b, 0xe0, 0xb7, 0x38, 0x8e, 0xb7,
+-      0xe1, 0x3c, 0x42, 0x7f, 0xfc, 0x52, 0x60, 0x17, 0x9b, 0xd4, 0x7d, 0xe7,
+-      0xfb, 0x38, 0xc3, 0x15, 0xd3, 0xcf, 0x17, 0xfd, 0x35, 0x9b, 0x24, 0xfc,
+-      0xde, 0xe7, 0xeb, 0x0f, 0x69, 0xa1, 0xfe, 0x7c, 0xb2, 0xc5, 0xcf, 0xfb,
+-      0xf9, 0x0d, 0x8c, 0xf5, 0x0b, 0x9f, 0xef, 0xdf, 0xe2, 0xe3, 0x6a, 0xd4,
+-      0xdb, 0x8f, 0x3d, 0xd6, 0x6a, 0x85, 0x3e, 0xf8, 0x6c, 0xd7, 0x93, 0x63,
+-      0xf6, 0xcd, 0xf6, 0x76, 0x8f, 0x13, 0xca, 0x87, 0xf2, 0x2b, 0xca, 0x11,
+-      0x37, 0x0d, 0x5b, 0xa0, 0xec, 0xac, 0x06, 0xd9, 0x89, 0xfc, 0xb9, 0x23,
+-      0xbc, 0xef, 0xc2, 0x3b, 0x25, 0xbb, 0x64, 0x21, 0xd6, 0xca, 0xfb, 0x5a,
+-      0xe8, 0xe3, 0xdf, 0xca, 0xc4, 0xac, 0xc8, 0x32, 0xde, 0x2f, 0x39, 0xb4,
+-      0xd1, 0x0c, 0xf2, 0xd7, 0x8d, 0x32, 0x3f, 0x87, 0x3a, 0xcb, 0x91, 0x52,
+-      0xe1, 0x4e, 0xc6, 0x99, 0xb8, 0x5c, 0x51, 0xf7, 0x7b, 0x22, 0x3b, 0xcf,
+-      0x1a, 0x62, 0x9c, 0x45, 0x41, 0x07, 0x99, 0x9f, 0xef, 0x0b, 0xef, 0xfb,
+-      0x7c, 0x5b, 0xaf, 0xd6, 0xb0, 0xd6, 0xe9, 0x55, 0xfe, 0xb1, 0x5a, 0x1f,
+-      0x97, 0xf2, 0x0c, 0xf7, 0x42, 0x3f, 0x97, 0xc2, 0x3b, 0x5b, 0x26, 0x4f,
+-      0x66, 0xe4, 0xfb, 0xfc, 0x5e, 0x93, 0x1d, 0xc5, 0x1e, 0x05, 0xa9, 0x2c,
+-      0x63, 0xbe, 0xfe, 0x4f, 0x32, 0xb7, 0x38, 0x2e, 0xf3, 0x33, 0x17, 0x1a,
+-      0xee, 0x73, 0x31, 0x9e, 0x6b, 0xac, 0x4f, 0x8b, 0xac, 0xa9, 0x50, 0x7f,
+-      0x5a, 0x18, 0xc3, 0x06, 0xea, 0x93, 0xa5, 0x9b, 0xef, 0x1f, 0x1b, 0xeb,
+-      0xd2, 0x51, 0x39, 0x8a, 0x33, 0xae, 0x9e, 0xcc, 0xa8, 0xba, 0xa6, 0x25,
+-      0x37, 0xfb, 0xf8, 0x87, 0x88, 0x11, 0x63, 0x42, 0x3d, 0xbb, 0x2e, 0x5f,
+-      0xb3, 0x8f, 0xca, 0x23, 0x88, 0x1d, 0x47, 0x90, 0x5f, 0xff, 0x36, 0xea,
+-      0xba, 0xd4, 0x66, 0x9e, 0x21, 0xe8, 0xb5, 0x58, 0x57, 0x7a, 0x32, 0x6a,
+-      0xdf, 0x61, 0xfe, 0x00, 0x92, 0x7d, 0xbf, 0xce, 0xf8, 0xf8, 0xdf, 0x5e,
+-      0x1e, 0xf1, 0xee, 0x43, 0x0b, 0x3e, 0x41, 0xc1, 0x69, 0x3e, 0xdc, 0x0c,
+-      0xe1, 0xfa, 0xcd, 0x63, 0x84, 0x9b, 0xd3, 0x02, 0x38, 0x0d, 0x70, 0x31,
+-      0xb9, 0x68, 0x1b, 0xd0, 0x8d, 0x51, 0xf0, 0x09, 0xdf, 0x3e, 0x18, 0x7e,
+-      0x6f, 0xdc, 0x80, 0x98, 0xba, 0xb6, 0xfe, 0x8d, 0x60, 0xfd, 0xf7, 0x83,
+-      0xf5, 0x97, 0x56, 0xd7, 0x87, 0x71, 0xf5, 0x13, 0x4f, 0x1a, 0xe8, 0x7a,
+-      0xa3, 0xe6, 0xc3, 0x1f, 0x0d, 0xe8, 0xba, 0xb4, 0x4a, 0x57, 0x08, 0x0f,
+-      0x79, 0x2a, 0x9e, 0xe9, 0x93, 0xe9, 0x9b, 0x7b, 0x21, 0x47, 0x7e, 0x47,
+-      0x86, 0x4d, 0x38, 0xfc, 0x7e, 0x4b, 0x3b, 0xd1, 0x65, 0x25, 0x71, 0x54,
+-      0xc6, 0xac, 0xf4, 0xf0, 0xa4, 0xc4, 0xa0, 0xc3, 0xf4, 0x29, 0x31, 0x99,
+-      0xa7, 0xaf, 0x41, 0x5f, 0xb6, 0x6f, 0x4d, 0xeb, 0xfb, 0x0d, 0xb4, 0xc6,
+-      0x9e, 0x27, 0x8d, 0x3e, 0xad, 0xf1, 0x1d, 0x6b, 0xb4, 0xfa, 0xf0, 0x3e,
+-      0xad, 0xef, 0xd7, 0x1a, 0xe0, 0xcf, 0x1a, 0x01, 0xbc, 0xd1, 0x00, 0x4f,
+-      0x7d, 0x66, 0x3e, 0x41, 0x7d, 0x26, 0x6d, 0x5f, 0x50, 0xf7, 0x66, 0x1b,
+-      0x72, 0xb3, 0x07, 0x3f, 0xbf, 0xc3, 0x93, 0x38, 0xf2, 0x8c, 0x66, 0xbc,
+-      0xbb, 0x32, 0xc3, 0x1c, 0x44, 0xef, 0x69, 0x96, 0x9d, 0xd0, 0x59, 0x9e,
+-      0x5d, 0xe3, 0x9d, 0xab, 0x27, 0x8f, 0xd8, 0xa4, 0xe5, 0x3f, 0xbd, 0x33,
+-      0x89, 0x9d, 0x76, 0x55, 0xfa, 0xcc, 0x66, 0xe1, 0x9d, 0xae, 0xc2, 0x99,
+-      0x21, 0x2d, 0xa7, 0xfb, 0x7a, 0xcd, 0xb7, 0xc0, 0xe7, 0xe8, 0x8c, 0x26,
+-      0xf3, 0x56, 0x3a, 0x79, 0x1e, 0x38, 0xf6, 0xe0, 0x6c, 0xe6, 0x07, 0x48,
+-      0x8f, 0xc8, 0x04, 0xf4, 0x7b, 0x5e, 0xc5, 0x43, 0xea, 0x71, 0x7a, 0xac,
+-      0x82, 0x1c, 0xe7, 0xa7, 0x2a, 0xa6, 0x79, 0xde, 0x87, 0x88, 0x6b, 0x63,
+-      0xeb, 0x74, 0x4f, 0x3f, 0xeb, 0xeb, 0x9e, 0x7e, 0x16, 0xb5, 0xf1, 0xf1,
+-      0xb8, 0xb4, 0x2c, 0xc1, 0x7e, 0x9e, 0xef, 0x52, 0xfa, 0xa7, 0x3f, 0xcf,
+-      0x6f, 0x19, 0xf0, 0x73, 0xc7, 0x0d, 0xb1, 0x8e, 0xab, 0x38, 0x00, 0x79,
+-      0x17, 0x64, 0xf2, 0x14, 0x7d, 0xa9, 0x25, 0x3b, 0x8e, 0xf3, 0x3c, 0x98,
+-      0xcf, 0xcc, 0x0d, 0x8e, 0xc3, 0x46, 0xa6, 0xf8, 0x7d, 0x70, 0xe9, 0x23,
+-      0x19, 0xb7, 0x28, 0x07, 0x94, 0xfa, 0x4b, 0xa6, 0xc4, 0x96, 0xe0, 0x13,
+-      0x96, 0x92, 0xd2, 0x04, 0xdb, 0xd2, 0xcf, 0x26, 0xb4, 0xea, 0xec, 0x7f,
+-      0xc1, 0x1e, 0xf8, 0x4d, 0x20, 0x83, 0x71, 0x52, 0xab, 0xd6, 0x06, 0xd0,
+-      0x53, 0xcf, 0x91, 0x46, 0x9d, 0xa5, 0x9e, 0x93, 0x8e, 0xd0, 0x5e, 0xf0,
+-      0x7c, 0x36, 0xa3, 0xee, 0x6c, 0x3f, 0xb4, 0xc9, 0xcb, 0xdf, 0x48, 0x61,
+-      0x26, 0xfc, 0x1b, 0x10, 0xd9, 0x8c, 0x1c, 0xa6, 0xa3, 0x60, 0xef, 0x18,
+-      0xbe, 0x22, 0x9f, 0x96, 0xaf, 0x6d, 0x9f, 0x82, 0x2f, 0xf2, 0xd1, 0xc8,
+-      0x17, 0x79, 0x6a, 0x97, 0x26, 0xc5, 0x57, 0xc8, 0x0f, 0x04, 0x0d, 0x7e,
+-      0x7a, 0x8e, 0x27, 0x81, 0xff, 0x61, 0xf8, 0x80, 0x6e, 0xf4, 0x0f, 0xa1,
+-      0x47, 0x28, 0x3b, 0x4b, 0xde, 0xc9, 0xeb, 0x55, 0xe4, 0x8b, 0x21, 0x9f,
+-      0x25, 0x3c, 0xbf, 0x2e, 0x93, 0xb3, 0xde, 0x61, 0xc4, 0x53, 0xde, 0x27,
+-      0x77, 0xea, 0x4a, 0x77, 0xd7, 0xf3, 0xfe, 0xba, 0xf8, 0xf2, 0xe1, 0x5d,
+-      0x3c, 0x9e, 0x17, 0xd7, 0xcb, 0xa2, 0xd1, 0x77, 0x24, 0x83, 0xbf, 0x7b,
+-      0xa1, 0x9f, 0xa0, 0x8c, 0xae, 0x4a, 0x61, 0x96, 0x77, 0x5a, 0x3e, 0xbe,
+-      0xd2, 0xea, 0xdf, 0xbe, 0x34, 0xae, 0x19, 0x00, 0x5c, 0x37, 0xe0, 0x48,
+-      0xd7, 0x0a, 0xe5, 0x07, 0x9f, 0xb3, 0xbd, 0xc1, 0xd7, 0x34, 0xae, 0xcb,
+-      0xca, 0x33, 0x88, 0xff, 0x6f, 0xd8, 0x37, 0xc9, 0xb5, 0xc4, 0x1c, 0x68,
+-      0xbe, 0xbe, 0x0f, 0x36, 0xd9, 0x04, 0x5f, 0x66, 0xca, 0x95, 0x5a, 0xb3,
+-      0xcc, 0x23, 0xcf, 0x59, 0x58, 0xa4, 0x2f, 0x24, 0xed, 0xad, 0x98, 0xf7,
+-      0xfd, 0x17, 0x7d, 0xed, 0x95, 0x1a, 0xe2, 0x2b, 0x6c, 0xfb, 0x4a, 0x2d,
+-      0x81, 0xbe, 0x1b, 0xbd, 0x85, 0x3e, 0x85, 0x3e, 0x83, 0x7e, 0x00, 0xfd,
+-      0x00, 0x7a, 0x0b, 0x6b, 0x93, 0xe8, 0xc3, 0x5a, 0x82, 0xb8, 0xd6, 0xf8,
+-      0xae, 0xaa, 0xfd, 0xf8, 0xdd, 0x90, 0xb1, 0xcc, 0xb0, 0x47, 0x50, 0x63,
+-      0x17, 0x06, 0xc2, 0xbf, 0xb9, 0xb9, 0xe1, 0x99, 0x16, 0x6b, 0xf7, 0x8a,
+-      0xb6, 0x47, 0x7d, 0x5f, 0x98, 0x41, 0x5c, 0x78, 0x6e, 0xab, 0xb4, 0x5a,
+-      0xe6, 0x3d, 0xea, 0xee, 0x68, 0x16, 0x63, 0x3e, 0xa3, 0x3e, 0x4e, 0x4c,
+-      0x21, 0x3e, 0xd1, 0x7f, 0xfe, 0x6f, 0xe7, 0xd6, 0x1b, 0xdb, 0xc6, 0x59,
+-      0xc6, 0x1f, 0x9f, 0x9d, 0x34, 0xe9, 0x9a, 0xf6, 0x92, 0x38, 0xa9, 0x93,
+-      0x85, 0xcd, 0x8e, 0x2f, 0xad, 0x45, 0xd2, 0x71, 0xed, 0x2c, 0x16, 0xa6,
+-      0x8c, 0x78, 0x76, 0x92, 0x76, 0x30, 0xa6, 0xb4, 0x74, 0xd3, 0x84, 0x10,
+-      0x58, 0xc9, 0xba, 0x75, 0x13, 0xd2, 0x28, 0x30, 0x34, 0x89, 0xa2, 0x18,
+-      0x27, 0x61, 0x19, 0x18, 0xc7, 0x0b, 0x81, 0x4e, 0xf0, 0xc5, 0x38, 0xd1,
+-      0x06, 0x22, 0x4a, 0x3a, 0x8d, 0x0f, 0x08, 0x6d, 0x74, 0xb8, 0x83, 0xef,
+-      0xfc, 0x11, 0x62, 0x12, 0x1f, 0xaa, 0xa8, 0x63, 0x20, 0x21, 0xe0, 0x23,
+-      0xd2, 0x98, 0x8e, 0xdf, 0xef, 0x79, 0xef, 0x12, 0xc7, 0x64, 0x54, 0xf0,
+-      0xc1, 0x3a, 0xbf, 0x77, 0xf7, 0xbe, 0xf7, 0xde, 0xfb, 0x3c, 0xef, 0xef,
+-      0xf9, 0x3d, 0x7f, 0xce, 0x43, 0x9f, 0x19, 0xe0, 0xf8, 0x11, 0x61, 0x0c,
+-      0x36, 0x9b, 0xc6, 0xff, 0xea, 0xc5, 0x1e, 0x63, 0x4b, 0xc1, 0xdb, 0x77,
+-      0xb8, 0x61, 0x60, 0xab, 0x46, 0xd0, 0x67, 0x3f, 0x9f, 0x00, 0x36, 0xb0,
+-      0x92, 0xa8, 0x54, 0xb1, 0x07, 0x7f, 0xed, 0xce, 0x29, 0xa7, 0xa3, 0x2c,
+-      0x16, 0xc1, 0x4d, 0x73, 0x65, 0x72, 0x97, 0xcb, 0xf0, 0x47, 0xe0, 0xcb,
+-      0x45, 0xe9, 0xbb, 0xd3, 0x16, 0x90, 0x83, 0xfe, 0x12, 0x73, 0xa3, 0x1d,
+-      0xf8, 0x26, 0x9e, 0x87, 0xf7, 0x5a, 0xf3, 0xb0, 0x66, 0xa7, 0xc1, 0x05,
+-      0x3d, 0x2f, 0xe2, 0x4c, 0x4a, 0xfc, 0x1c, 0x31, 0x47, 0xd0, 0xdf, 0xc4,
+-      0xb2, 0xc8, 0xab, 0x32, 0xd3, 0x9a, 0x83, 0x84, 0x72, 0xfd, 0x0e, 0x7d,
+-      0x7b, 0xc4, 0xc4, 0xa7, 0x18, 0x7f, 0x16, 0x99, 0x2c, 0x1b, 0x2e, 0x0b,
+-      0xbf, 0xac, 0x61, 0xbc, 0xbb, 0xfd, 0xf1, 0x78, 0xdd, 0xd2, 0x71, 0x6a,
+-      0xd2, 0x6b, 0x62, 0xbb, 0x63, 0x23, 0xb0, 0x11, 0x51, 0xa9, 0x43, 0x2e,
+-      0xd7, 0x21, 0x93, 0x37, 0x4b, 0xd4, 0xf5, 0x61, 0xe8, 0x7d, 0x0b, 0xf3,
+-      0xb3, 0x18, 0x6b, 0x44, 0x9f, 0x5d, 0x2f, 0x01, 0x3b, 0x6d, 0xf5, 0x4f,
+-      0x7b, 0xc9, 0x0b, 0x69, 0x07, 0xcd, 0x38, 0x03, 0xe6, 0x3e, 0x09, 0xae,
+-      0x75, 0xeb, 0x7c, 0x6a, 0x1a, 0x03, 0xe3, 0x3a, 0x41, 0x07, 0x4b, 0xdd,
+-      0xfe, 0x3d, 0x5e, 0x8f, 0xa9, 0x77, 0xe2, 0x39, 0xbe, 0xc7, 0x88, 0x64,
+-      0xcb, 0x41, 0xbf, 0x4e, 0xf4, 0x6b, 0x6f, 0x18, 0xeb, 0x68, 0xd3, 0x3b,
+-      0x58, 0xfe, 0x3b, 0xf0, 0x7a, 0x33, 0xdf, 0x4f, 0xd8, 0x05, 0x09, 0x38,
+-      0x3f, 0xed, 0x2f, 0x65, 0x93, 0xd6, 0xfc, 0xb6, 0x91, 0xcf, 0x80, 0xef,
+-      0x03, 0x24, 0x96, 0x0a, 0x02, 0xbe, 0x18, 0xa5, 0x8c, 0xd2, 0xd8, 0xd7,
+-      0x3f, 0x89, 0xca, 0x61, 0x57, 0x2a, 0xa5, 0x03, 0x62, 0x75, 0xb5, 0x68,
+-      0x8d, 0x4e, 0xdc, 0x6a, 0x7c, 0xe6, 0x67, 0xfd, 0x67, 0xc2, 0xf7, 0x5e,
+-      0x69, 0xd7, 0xb8, 0x34, 0xec, 0x0c, 0xee, 0x39, 0xd4, 0x34, 0xb7, 0x87,
+-      0xfd, 0xfb, 0x78, 0xdd, 0x91, 0x02, 0xf8, 0x67, 0xae, 0x0c, 0x26, 0x0f,
+-      0xfc, 0xb6, 0xc6, 0x98, 0xe3, 0x61, 0x0c, 0x6f, 0x38, 0x3e, 0x8f, 0x39,
+-      0x16, 0xec, 0x31, 0xc6, 0xcd, 0x30, 0x46, 0x5f, 0xd3, 0x18, 0x13, 0xfe,
+-      0x18, 0x59, 0x29, 0x5e, 0x99, 0xc0, 0x5e, 0x1b, 0x83, 0x7d, 0x4f, 0xda,
+-      0xa7, 0xe5, 0x23, 0x22, 0x9d, 0x38, 0xf7, 0x72, 0x0a, 0x72, 0xf2, 0xbc,
+-      0x49, 0x77, 0x1a, 0xf3, 0x7e, 0x0d, 0xb6, 0x35, 0xe0, 0x3c, 0xc5, 0x58,
+-      0x18, 0x36, 0xec, 0xf3, 0x2e, 0xe3, 0x62, 0x05, 0x30, 0xb2, 0x84, 0x6d,
+-      0x85, 0x86, 0x53, 0x35, 0xf0, 0xba, 0x2a, 0x2c, 0x69, 0xd1, 0xe1, 0x7b,
+-      0x76, 0x48, 0xd1, 0x0e, 0x8d, 0x87, 0xc1, 0x6b, 0xb2, 0x65, 0xee, 0x23,
+-      0x19, 0x0a, 0x8f, 0xb5, 0x82, 0x8b, 0x7a, 0xf2, 0x36, 0xa0, 0xa6, 0x58,
+-      0x5a, 0x92, 0xfa, 0x86, 0x8d, 0xe3, 0x05, 0xc8, 0xe1, 0x45, 0xfc, 0x7f,
+-      0x3e, 0xaa, 0x75, 0x4a, 0xe0, 0xeb, 0x8b, 0x78, 0x1f, 0xf2, 0x19, 0xf2,
+-      0x88, 0x1a, 0xec, 0xad, 0x05, 0x5b, 0x03, 0x5e, 0x35, 0x4a, 0xde, 0xf5,
+-      0xdc, 0xda, 0x4d, 0x79, 0x73, 0x35, 0x81, 0x67, 0xd1, 0x2e, 0x9f, 0x21,
+-      0x1e, 0xd8, 0x0b, 0x69, 0x9c, 0x5b, 0x37, 0xdc, 0xb7, 0xb8, 0x85, 0x0d,
+-      0xd4, 0x05, 0x8e, 0x00, 0x8e, 0xbd, 0x0d, 0x0c, 0x2c, 0xe2, 0xfe, 0xfa,
+-      0x6a, 0x44, 0xd6, 0x1c, 0xf2, 0x22, 0x89, 0x67, 0x71, 0x6f, 0x7d, 0x7d,
+-      0xb1, 0xd7, 0xe4, 0x51, 0xd8, 0x7f, 0x42, 0x0a, 0xe0, 0x75, 0xa7, 0xb5,
+-      0xef, 0xad, 0xe4, 0xcc, 0x39, 0x35, 0xfa, 0x77, 0xb3, 0x52, 0xe7, 0x7e,
+-      0xd2, 0xdc, 0x03, 0xb9, 0xc1, 0x65, 0xe8, 0x2c, 0x39, 0x3b, 0xfd, 0x00,
+-      0xfc, 0xdf, 0xe0, 0x75, 0xbe, 0x3b, 0x8e, 0xd5, 0x24, 0xd6, 0x86, 0xfb,
+-      0xbe, 0x10, 0x9a, 0x3e, 0x0e, 0x3b, 0x6a, 0x71, 0xaf, 0x17, 0x15, 0x0b,
+-      0x8a, 0xcb, 0xb3, 0xb0, 0x29, 0xac, 0xb5, 0xe8, 0x83, 0x2e, 0x3e, 0x08,
+-      0x59, 0xa6, 0x71, 0x5f, 0x93, 0x2d, 0xd9, 0x2c, 0x2a, 0x2f, 0xb3, 0x5e,
+-      0x32, 0xb8, 0x66, 0xd5, 0xc0, 0xd1, 0xb0, 0x7f, 0xac, 0x4d, 0xe8, 0x16,
+-      0xf6, 0x90, 0xb5, 0x19, 0xc5, 0x11, 0x78, 0xbc, 0x09, 0xbf, 0x02, 0xf8,
+-      0x66, 0x6d, 0xc2, 0x27, 0x00, 0xbe, 0x59, 0x9b, 0x29, 0x1c, 0x81, 0xf1,
+-      0x9b, 0x01, 0xae, 0x71, 0xfc, 0x94, 0xe6, 0xe1, 0x0d, 0xbe, 0x90, 0x4b,
+-      0x12, 0x5f, 0x02, 0x3e, 0x69, 0x74, 0xe1, 0xeb, 0xcb, 0xc4, 0x10, 0xea,
+-      0x75, 0x12, 0xb8, 0x45, 0x5d, 0x30, 0x5c, 0x72, 0xbd, 0x62, 0xd6, 0x6c,
+-      0x7e, 0xeb, 0x9a, 0xda, 0x88, 0x29, 0x71, 0xa0, 0x63, 0x5c, 0x3b, 0x5c,
+-      0x53, 0x1b, 0xf0, 0xba, 0x64, 0xf4, 0xc8, 0x35, 0xfb, 0xb9, 0x64, 0xd6,
+-      0x53, 0xf2, 0x0d, 0xc5, 0xad, 0x00, 0xb3, 0xc8, 0x21, 0x63, 0x58, 0x3f,
+-      0x47, 0x9e, 0xff, 0xf6, 0x4d, 0xc9, 0x7e, 0x87, 0xb8, 0x35, 0x1c, 0x6b,
+-      0x0f, 0x11, 0xab, 0x3c, 0xd9, 0x80, 0x6d, 0x3a, 0xed, 0x26, 0x1e, 0x65,
+-      0xfd, 0x66, 0x1e, 0xba, 0xd2, 0x7a, 0x32, 0xe1, 0xc6, 0x43, 0xc9, 0x47,
+-      0xdb, 0x43, 0xb4, 0x8d, 0xc3, 0xf6, 0x45, 0x39, 0xe5, 0xc7, 0xa3, 0x0e,
+-      0xc8, 0x45, 0xe5, 0xfe, 0x2c, 0xcf, 0x78, 0x57, 0x73, 0x23, 0xef, 0xa4,
+-      0xb9, 0xd6, 0x68, 0x6f, 0x6a, 0xdc, 0xa8, 0xed, 0x9d, 0x74, 0x8b, 0x14,
+-      0x7b, 0x3c, 0xef, 0xc2, 0xc9, 0xb7, 0xa2, 0x26, 0xce, 0xd5, 0x7f, 0xd4,
+-      0x60, 0x01, 0x00, 0x4c, 0xdb, 0x9f, 0xc0, 0x91, 0xba, 0x4d, 0x7b, 0x4b,
+-      0xfb, 0x48, 0xb9, 0xe1, 0xb8, 0xce, 0xff, 0xb4, 0xbd, 0x4b, 0xb0, 0xbd,
+-      0xb4, 0x97, 0x47, 0x24, 0xc7, 0x9c, 0x9c, 0xa5, 0xe7, 0x0b, 0x86, 0x4b,
+-      0xfb, 0xf7, 0x55, 0xf2, 0x32, 0x5f, 0x21, 0x87, 0xaa, 0xc3, 0x96, 0xb1,
+-      0xf6, 0x91, 0x36, 0x6d, 0x0e, 0xf6, 0x9c, 0xb9, 0x5a, 0x5c, 0xab, 0xb2,
+-      0x5f, 0x22, 0x15, 0xb7, 0xf0, 0xce, 0x3b, 0x3a, 0x55, 0x82, 0xfe, 0x51,
+-      0x9f, 0x20, 0xf7, 0x17, 0xe8, 0x5b, 0x0c, 0xa9, 0x8e, 0x64, 0x7f, 0xc0,
+-      0xb5, 0xf7, 0xbc, 0x33, 0x2e, 0xd4, 0xb0, 0xd3, 0xec, 0x01, 0xf2, 0x80,
+-      0x8f, 0x63, 0x5d, 0xa6, 0xdc, 0x9b, 0xb4, 0xdd, 0x7f, 0xb7, 0x9c, 0xe1,
+-      0xd4, 0xc5, 0x10, 0xf7, 0x36, 0xda, 0xeb, 0x61, 0xa9, 0x46, 0xf9, 0xfe,
+-      0x58, 0xaf, 0x10, 0xf7, 0xce, 0x7e, 0xeb, 0xd0, 0xbc, 0x06, 0x59, 0xac,
+-      0x01, 0xd7, 0x32, 0x58, 0x03, 0xfe, 0x9f, 0x80, 0xbc, 0xe8, 0x33, 0x10,
+-      0x87, 0xf1, 0x7f, 0xcb, 0x3c, 0x9b, 0x75, 0x99, 0xbb, 0x73, 0xe6, 0x7c,
+-      0x29, 0xd3, 0xd7, 0x25, 0xa7, 0xf2, 0x5d, 0x92, 0x5c, 0xe5, 0x75, 0x99,
+-      0xac, 0x2c, 0xc9, 0x03, 0xce, 0x38, 0xde, 0xf7, 0x86, 0x37, 0xeb, 0xa8,
+-      0xaf, 0x32, 0x3a, 0x83, 0x67, 0xcf, 0x8e, 0xf4, 0xc9, 0x9f, 0x5d, 0x47,
+-      0x16, 0xd7, 0x6c, 0xc9, 0xdb, 0x69, 0x79, 0x5e, 0x63, 0xf9, 0xf4, 0x4f,
+-      0x42, 0xe0, 0xa4, 0xcc, 0xc9, 0xb7, 0x89, 0xf4, 0x38, 0xb1, 0x6d, 0x21,
+-      0xa7, 0x6c, 0x81, 0xac, 0xe3, 0x86, 0x37, 0xdb, 0xe6, 0xfa, 0xb1, 0x17,
+-      0xc0, 0xdd, 0xdd, 0xb7, 0x7a, 0x83, 0xf8, 0xb0, 0xe1, 0xb7, 0x7f, 0xf0,
+-      0xf3, 0x62, 0x69, 0xa9, 0x30, 0x07, 0xa7, 0x38, 0xeb, 0x40, 0x97, 0x98,
+-      0xc3, 0x8f, 0x69, 0xdc, 0xa1, 0xa5, 0x4c, 0x8c, 0xba, 0x0a, 0x8c, 0x1a,
+-      0x25, 0x76, 0x8d, 0xaf, 0xb9, 0x8c, 0x0b, 0x44, 0xe5, 0xb7, 0x25, 0xe2,
+-      0x70, 0x5c, 0x7e, 0x53, 0x7a, 0x16, 0xf3, 0x49, 0x54, 0x19, 0xcf, 0xbc,
+-      0x5e, 0x29, 0x90, 0x27, 0x29, 0x9f, 0xcf, 0xba, 0x5f, 0x54, 0x3b, 0x10,
+-      0xb7, 0x8a, 0xdd, 0x2d, 0x8a, 0x37, 0x4f, 0x6b, 0x1e, 0x36, 0x6e, 0x0d,
+-      0xc8, 0xf5, 0x55, 0xbe, 0x6f, 0x0a, 0x63, 0x47, 0x43, 0xb9, 0x75, 0xda,
+-      0xa5, 0x64, 0x6c, 0xc6, 0x3a, 0x20, 0x17, 0xa2, 0x8c, 0x53, 0x8f, 0x11,
+-      0x9f, 0x61, 0x0b, 0x87, 0xed, 0x19, 0xd6, 0x38, 0xa9, 0xfd, 0x89, 0x35,
+-      0xe1, 0xec, 0xd3, 0x3e, 0xce, 0xf2, 0xda, 0x18, 0x64, 0x4a, 0x5b, 0x94,
+-      0xa8, 0x4c, 0x58, 0x49, 0xd8, 0x3c, 0xfc, 0xdf, 0xe0, 0xf8, 0x71, 0xf9,
+-      0xc2, 0xc6, 0x45, 0xf0, 0xef, 0x61, 0xfb, 0x1c, 0xed, 0xaa, 0x3d, 0x8a,
+-      0x7b, 0xf9, 0xfc, 0x0f, 0x34, 0x8d, 0xf5, 0x69, 0x7f, 0x2c, 0x5e, 0xc7,
+-      0x3e, 0x2f, 0x3b, 0x32, 0x5b, 0x62, 0x2e, 0xda, 0xcc, 0x75, 0xef, 0xbd,
+-      0x67, 0x77, 0x9e, 0xbb, 0xb0, 0x4c, 0x7e, 0x63, 0xea, 0xdc, 0x8a, 0xe0,
+-      0x42, 0x9f, 0xec, 0xe2, 0x33, 0xf9, 0xbc, 0xc3, 0x92, 0x7d, 0x04, 0xf8,
+-      0x52, 0xe6, 0xaf, 0xe0, 0xd7, 0xde, 0xc2, 0x5f, 0x89, 0xf6, 0xef, 0x63,
+-      0x9b, 0xee, 0xf3, 0xc7, 0xfb, 0x3d, 0x74, 0x28, 0xda, 0x70, 0x3f, 0x63,
+-      0x2a, 0x6c, 0xc7, 0xa5, 0xb0, 0xc1, 0xa3, 0xe7, 0x75, 0x39, 0xad, 0x72,
+-      0xce, 0xbe, 0xbd, 0x69, 0x8c, 0x13, 0x38, 0x67, 0x38, 0x41, 0xb8, 0x1c,
+-      0xf2, 0xb9, 0xc5, 0x9d, 0xe4, 0x4d, 0xfe, 0xff, 0x36, 0x8d, 0xc5, 0xc4,
+-      0xad, 0xfe, 0xa6, 0xf7, 0xb8, 0x73, 0xc7, 0x0e, 0xc7, 0x2d, 0x62, 0xe7,
+-      0x8f, 0x71, 0x8d, 0x3a, 0xe4, 0x29, 0x8f, 0x8f, 0x80, 0xe7, 0xe7, 0x80,
+-      0x05, 0x51, 0xe7, 0xb6, 0x18, 0x8b, 0x4d, 0xae, 0x2d, 0x9b, 0x7a, 0x54,
+-      0x72, 0xe0, 0x6b, 0xfb, 0xe6, 0x6a, 0x53, 0xd0, 0x65, 0x8c, 0x7f, 0x90,
+-      0xe3, 0x8f, 0xf8, 0xeb, 0x9c, 0x70, 0x0b, 0xd6, 0x87, 0x65, 0x66, 0xd5,
+-      0xe8, 0x5f, 0xd6, 0x81, 0xee, 0x1d, 0x46, 0x7b, 0x9d, 0x36, 0xe1, 0xfd,
+-      0xc6, 0x09, 0x6c, 0x43, 0x4a, 0x6d, 0xc3, 0xfc, 0x32, 0xf5, 0x93, 0x7a,
+-      0x19, 0xe8, 0x63, 0x80, 0x79, 0xd4, 0x51, 0xe2, 0x6c, 0x5a, 0x5e, 0x58,
+-      0xe6, 0xda, 0x64, 0x34, 0xa7, 0x35, 0xb4, 0x32, 0xab, 0xf5, 0x3d, 0x83,
+-      0xe5, 0xc4, 0x8b, 0x05, 0x19, 0x97, 0xab, 0x2e, 0xd7, 0x2c, 0x51, 0xcd,
+-      0x87, 0x3b, 0x1a, 0xde, 0xff, 0x9c, 0xbf, 0x66, 0x29, 0xd5, 0xab, 0xc1,
+-      0xf2, 0xe5, 0x1d, 0x79, 0xe7, 0xad, 0xc3, 0x4d, 0xeb, 0x14, 0x70, 0xb8,
+-      0xb8, 0x90, 0x3f, 0x44, 0xba, 0xd8, 0x87, 0xcf, 0x25, 0xe7, 0xe3, 0xb3,
+-      0x68, 0x5b, 0xef, 0x60, 0x3d, 0x83, 0xd0, 0x8f, 0x8b, 0x3c, 0x62, 0xb8,
+-      0x45, 0xde, 0x7a, 0x18, 0xeb, 0x76, 0x50, 0xeb, 0x28, 0xe7, 0xbf, 0xfb,
+-      0x1e, 0xfa, 0xe7, 0x7d, 0x7e, 0x9e, 0xc6, 0x78, 0x7c, 0x77, 0xee, 0xa9,
+-      0xd2, 0x49, 0xea, 0xe6, 0xa4, 0xe6, 0x03, 0xd9, 0x87, 0xfb, 0x96, 0x6b,
+-      0x44, 0x39, 0x5c, 0x8e, 0x19, 0x7b, 0x7a, 0xa2, 0x69, 0x3e, 0x49, 0x7f,
+-      0x3e, 0xc1, 0xf5, 0x16, 0x89, 0xf4, 0xa6, 0xb4, 0x96, 0x24, 0x59, 0xa6,
+-      0x8f, 0x02, 0x5b, 0x35, 0xcd, 0xb1, 0x6e, 0x8d, 0xbd, 0xf9, 0xff, 0x13,
+-      0x7b, 0xf3, 0x56, 0x49, 0xe7, 0xd8, 0xe2, 0xfc, 0x2f, 0x72, 0x6c, 0xac,
+-      0xa7, 0x37, 0x72, 0x7b, 0x6e, 0x99, 0xf6, 0x29, 0xa3, 0xb1, 0xe3, 0x3f,
+-      0x95, 0xb8, 0x96, 0x9c, 0xe3, 0x55, 0xce, 0x71, 0xbc, 0xae, 0xb5, 0x74,
+-      0x0f, 0xe9, 0x9e, 0x5d, 0x5c, 0x26, 0xa6, 0x74, 0xc8, 0x5a, 0x25, 0xc0,
+-      0x95, 0x07, 0x7c, 0x4e, 0x5b, 0xec, 0x6e, 0xc5, 0x3e, 0x39, 0xe3, 0x5a,
+-      0x5a, 0x47, 0x68, 0x3d, 0xcc, 0x73, 0x03, 0x52, 0x5b, 0xa5, 0x9d, 0x4d,
+-      0xc2, 0xaf, 0x88, 0x86, 0x6a, 0xeb, 0xcc, 0x45, 0xb2, 0x4e, 0x64, 0x5c,
+-      0x98, 0xbb, 0xcf, 0xd9, 0xf3, 0xd8, 0x5f, 0x31, 0xf8, 0xfd, 0xe4, 0xf0,
+-      0x8c, 0x8f, 0x35, 0xcb, 0x7b, 0x74, 0x87, 0x03, 0xee, 0x95, 0xf3, 0x2f,
+-      0xb0, 0xde, 0xd4, 0x6b, 0xc7, 0xbe, 0x0e, 0x3b, 0x99, 0x8b, 0xf2, 0xff,
+-      0x0c, 0xb8, 0x3f, 0x7d, 0x8d, 0xb8, 0xfa, 0x1a, 0xb5, 0x6a, 0x46, 0x96,
+-      0x54, 0xf7, 0x3b, 0xfc, 0x58, 0x52, 0x87, 0xea, 0x07, 0x75, 0x2c, 0xaf,
+-      0x9c, 0x7b, 0x54, 0x71, 0xaa, 0x58, 0x1a, 0x36, 0x75, 0x26, 0x76, 0xcc,
+-      0xaf, 0x27, 0x6f, 0x7c, 0x7e, 0xcc, 0x7f, 0xfe, 0x5f, 0x7c, 0xf9, 0xda,
+-      0x8a, 0x31, 0xba, 0xd6, 0x56, 0x52, 0x7d, 0xcb, 0xf9, 0x65, 0xea, 0x07,
+-      0xf5, 0x84, 0x38, 0x17, 0xdc, 0x17, 0xc8, 0x24, 0x68, 0xf3, 0x7e, 0xea,
+-      0x7c, 0x63, 0x4d, 0x41, 0xb0, 0x3f, 0x83, 0x73, 0x81, 0x8c, 0x78, 0xad,
+-      0xd1, 0x0e, 0x70, 0xaf, 0xc5, 0x21, 0xa7, 0xdd, 0xfd, 0xd6, 0x55, 0xde,
+-      0x95, 0x4d, 0xf6, 0x14, 0xe7, 0x7f, 0x99, 0x71, 0x5c, 0xec, 0xb1, 0xfd,
+-      0xe4, 0xf3, 0x65, 0x95, 0x4f, 0x1e, 0xf2, 0xe9, 0x52, 0xdc, 0xa7, 0x8f,
+-      0x77, 0xc9, 0xd7, 0xb9, 0x0e, 0xac, 0x19, 0xe3, 0xb2, 0xc0, 0xb7, 0xf3,
+-      0xc4, 0xf9, 0xbe, 0x3e, 0xe2, 0x0b, 0x63, 0x8a, 0x99, 0xe9, 0x43, 0xc0,
+-      0x30, 0xb6, 0x8f, 0x2b, 0x07, 0x31, 0x3e, 0x56, 0x5c, 0x63, 0x8b, 0x61,
+-      0x60, 0x72, 0xad, 0x04, 0x7e, 0xc6, 0xba, 0xaf, 0x3d, 0xf2, 0x7a, 0xca,
+-      0x5f, 0xaf, 0x89, 0x3e, 0xca, 0x87, 0xfb, 0x80, 0x58, 0xd9, 0x89, 0xf1,
+-      0xce, 0x46, 0x53, 0xd0, 0xb1, 0x71, 0x9c, 0x1f, 0x52, 0x1f, 0x22, 0x8c,
+-      0x7d, 0xbe, 0x5d, 0xea, 0xf5, 0xfd, 0x36, 0x07, 0x6d, 0xf8, 0xaa, 0xa5,
+-      0x2e, 0xfa, 0x11, 0x1a, 0x47, 0x6c, 0x2d, 0xc3, 0x67, 0x05, 0x76, 0xd7,
+-      0xd5, 0x06, 0x8d, 0xe0, 0xfa, 0x6d, 0xac, 0x89, 0xd3, 0xda, 0xe0, 0x6d,
+-      0x95, 0x19, 0x7d, 0xcd, 0x63, 0xba, 0xa6, 0xb5, 0x52, 0x22, 0xf6, 0xb8,
+-      0xf8, 0xe7, 0xa6, 0xf9, 0xdc, 0xc1, 0x86, 0x79, 0x4d, 0xca, 0xd9, 0x1d,
+-      0x1b, 0x41, 0xdf, 0x19, 0xbc, 0xbd, 0x62, 0x6c, 0x40, 0xb1, 0x9a, 0xd2,
+-      0xfa, 0xa5, 0xf0, 0xd8, 0x06, 0xd6, 0x92, 0x3c, 0xf4, 0x06, 0xb8, 0xf7,
+-      0x08, 0xd6, 0x90, 0x5c, 0xdb, 0x9b, 0x5b, 0x70, 0x33, 0xcc, 0x85, 0xc1,
+-      0x86, 0xcd, 0x49, 0x0e, 0xbe, 0x40, 0x2e, 0x7c, 0x98, 0x31, 0x64, 0xf0,
+-      0xc1, 0x82, 0x1f, 0x6f, 0x1c, 0x61, 0x9c, 0x54, 0x56, 0xd6, 0x39, 0x77,
+-      0xee, 0x6f, 0xe3, 0x6f, 0xd7, 0x4a, 0x9c, 0xaf, 0x89, 0x3d, 0xb0, 0x6d,
+-      0x95, 0x5d, 0x1c, 0xb9, 0x16, 0x69, 0x1c, 0xef, 0xc5, 0x9e, 0xe0, 0xbd,
+-      0x38, 0xae, 0xdf, 0x90, 0x5f, 0xad, 0x06, 0xf6, 0x3c, 0x24, 0x6f, 0x3a,
+-      0xde, 0xdc, 0xbc, 0xdb, 0xcd, 0x35, 0x70, 0x0b, 0xcc, 0x65, 0x3b, 0x8e,
+-      0x5b, 0x14, 0xcf, 0xab, 0xbb, 0xf5, 0x6e, 0x4b, 0x65, 0x49, 0x0c, 0xf8,
+-      0x1a, 0xd6, 0xf0, 0x8d, 0xbb, 0x2d, 0x31, 0xf2, 0xa3, 0x6c, 0xae, 0xfd,
+-      0x57, 0xfc, 0x0f, 0x30, 0x90, 0xfa, 0x48, 0xbd, 0xbc, 0x21, 0x53, 0x8a,
+-      0xf9, 0xfb, 0xf5, 0x6b, 0xc4, 0x89, 0x80, 0xd3, 0x12, 0xd3, 0xa9, 0x8b,
+-      0x31, 0xf5, 0x09, 0x8e, 0x95, 0x9b, 0x71, 0xe1, 0x33, 0x7e, 0x0e, 0x61,
+-      0x3f, 0xdd, 0x7b, 0xd4, 0xc7, 0x86, 0x31, 0xe5, 0xcb, 0x19, 0x9b, 0x18,
+-      0xc1, 0xf9, 0x1c, 0x94, 0xd9, 0x2b, 0x8d, 0x38, 0x4c, 0x5f, 0xcf, 0xe0,
+-      0x87, 0x7e, 0xe3, 0xa1, 0xfc, 0xd7, 0x92, 0xc1, 0x15, 0xf2, 0x25, 0x07,
+-      0x58, 0xda, 0x23, 0xf9, 0xe9, 0xb0, 0x24, 0x57, 0x7e, 0xd6, 0x67, 0xf8,
+-      0x2d, 0xf5, 0x0f, 0xfb, 0x4d, 0xcf, 0xb1, 0x5d, 0xc7, 0xf9, 0x23, 0xc2,
+-      0x67, 0x1b, 0x7d, 0xc6, 0x7e, 0x3e, 0x1f, 0x5c, 0xb3, 0x9b, 0x74, 0xf4,
+-      0x5e, 0x5f, 0x47, 0x79, 0xdd, 0x32, 0xb9, 0x0e, 0xdc, 0x3b, 0xb8, 0xc2,
+-      0x39, 0x9a, 0x7e, 0x83, 0x2b, 0xc6, 0x47, 0xdf, 0xdb, 0x6f, 0x64, 0xa7,
+-      0x1f, 0xae, 0x83, 0xef, 0x9a, 0xb1, 0xa7, 0x46, 0xc1, 0xe3, 0x46, 0x58,
+-      0x83, 0x44, 0x9b, 0x3d, 0xe4, 0x4e, 0x09, 0xf5, 0x3d, 0xe1, 0xeb, 0x1c,
+-      0xf1, 0xa6, 0xcb, 0xc7, 0x9b, 0x5d, 0x1b, 0x93, 0x33, 0x35, 0x27, 0x8c,
+-      0x83, 0x34, 0xd8, 0x18, 0xe9, 0xff, 0x4f, 0x1b, 0x73, 0xc4, 0x1f, 0x27,
+-      0xb8, 0x16, 0xe0, 0x4a, 0xd0, 0x0e, 0x70, 0xa5, 0x99, 0xc7, 0x06, 0xb2,
+-      0x6f, 0x3c, 0xdf, 0xe8, 0xe7, 0x65, 0x7c, 0x7f, 0xde, 0xd2, 0xfd, 0xf3,
+-      0xca, 0x8e, 0x1f, 0x4f, 0x19, 0x27, 0xa0, 0x7a, 0x25, 0xec, 0xed, 0xf7,
+-      0xd4, 0x6f, 0x5e, 0xbc, 0x32, 0xa1, 0xb1, 0x9c, 0x9a, 0xca, 0xfa, 0xab,
+-      0x58, 0x9f, 0x33, 0xd8, 0x47, 0x0f, 0x46, 0x77, 0xeb, 0x86, 0x56, 0x9f,
+-      0xc9, 0xfa, 0xbc, 0x25, 0x23, 0x5d, 0x98, 0x5f, 0x5a, 0xeb, 0xb0, 0xda,
+-      0x9d, 0xaf, 0xc8, 0x03, 0x66, 0xee, 0x6d, 0x6d, 0x63, 0xeb, 0xcf, 0xb4,
+-      0x7d, 0x2b, 0xd0, 0x73, 0xea, 0xcf, 0xea, 0x33, 0xb3, 0x15, 0x6f, 0x3c,
+-      0x72, 0x72, 0xd8, 0x2e, 0x0a, 0x6b, 0xbd, 0xc7, 0xe5, 0x09, 0x97, 0xd7,
+-      0x7f, 0x88, 0xeb, 0xd3, 0xf4, 0x21, 0x13, 0x11, 0xfd, 0xfe, 0x20, 0x11,
+-      0x7b, 0x0c, 0x7b, 0x6f, 0x46, 0xbf, 0xf7, 0x38, 0xa4, 0x35, 0xe2, 0x35,
+-      0x21, 0x97, 0x62, 0x8d, 0xc1, 0xb3, 0xf2, 0xb8, 0x3b, 0xe4, 0xd6, 0xc5,
+-      0x70, 0xdc, 0x19, 0xcd, 0xf7, 0x1c, 0x90, 0xc7, 0xdc, 0x48, 0x5b, 0x76,
+-      0xcb, 0xe8, 0xfc, 0x44, 0x38, 0xd3, 0xbe, 0xe0, 0x44, 0xdb, 0xa6, 0xb6,
+-      0xb0, 0xa7, 0xb7, 0x80, 0xf7, 0x5b, 0xb1, 0x50, 0x6e, 0x83, 0xef, 0x1e,
+-      0x36, 0x35, 0x1d, 0xea, 0x5f, 0x11, 0x43, 0xee, 0x93, 0x6d, 0xfb, 0xb8,
+-      0x6c, 0xa7, 0xf8, 0x4d, 0xd6, 0x29, 0xb4, 0x07, 0x35, 0xe7, 0xb2, 0x0d,
+-      0xbc, 0xd9, 0x4e, 0xb5, 0xa9, 0x0e, 0xaa, 0x1f, 0x06, 0x9c, 0xda, 0xb6,
+-      0x89, 0x4f, 0x77, 0xf0, 0x88, 0x77, 0x9e, 0x83, 0x1c, 0x58, 0xef, 0x71,
+-      0x02, 0x6d, 0xe2, 0x9a, 0xdd, 0x74, 0xbe, 0x1f, 0xed, 0xbb, 0x31, 0x46,
+-      0xab, 0xbe, 0xa3, 0xe5, 0x9c, 0x34, 0x79, 0xcc, 0x3d, 0xf7, 0x74, 0x36,
+-      0xb5, 0x3f, 0x77, 0xd4, 0x7c, 0x6f, 0xf4, 0x3d, 0xca, 0xb8, 0x90, 0x91,
+-      0xbf, 0xc5, 0xf6, 0xb6, 0x97, 0xfb, 0xf6, 0xb6, 0x0f, 0x4b, 0x7b, 0x0f,
+-      0x45, 0xd1, 0xdd, 0x74, 0x5f, 0xa0, 0x43, 0x41, 0xfb, 0x28, 0x71, 0x85,
+-      0x76, 0x4b, 0x7d, 0xa6, 0xed, 0x28, 0x9f, 0xb5, 0xd8, 0xd4, 0x87, 0xff,
+-      0xd9, 0x87, 0x7d, 0x19, 0xbf, 0xfb, 0xbe, 0xd1, 0x33, 0x8b, 0xbe, 0x3f,
+-      0xe3, 0x17, 0xd4, 0xd3, 0xfd, 0xfc, 0xa9, 0x84, 0x7e, 0x1f, 0xb4, 0xbf,
+-      0xae, 0x05, 0x38, 0x12, 0xf3, 0x63, 0x0a, 0x26, 0xef, 0x64, 0xe2, 0xbe,
+-      0x94, 0x9d, 0xe6, 0x9d, 0x62, 0xd7, 0x21, 0xe7, 0x0b, 0x90, 0xf3, 0x64,
+-      0x98, 0xbe, 0x1f, 0xf3, 0x4b, 0x8e, 0xe4, 0xb6, 0x28, 0x6f, 0xda, 0x75,
+-      0xea, 0x26, 0x78, 0xc4, 0x16, 0x31, 0xc5, 0x02, 0x07, 0xca, 0x60, 0x8e,
+-      0xaf, 0xe1, 0xbc, 0xe5, 0xd7, 0x6f, 0xa4, 0x61, 0xd3, 0x5c, 0xfc, 0x28,
+-      0x77, 0xf8, 0xf4, 0x6b, 0x94, 0x31, 0xeb, 0xd9, 0x18, 0x0b, 0xe0, 0xfc,
+-      0x98, 0x63, 0x77, 0xa1, 0xd3, 0x13, 0xd0, 0xdd, 0x88, 0x38, 0xe5, 0x13,
+-      0x52, 0x98, 0x9e, 0x50, 0xfb, 0x3f, 0x08, 0xfb, 0x34, 0xef, 0x66, 0x65,
+-      0xe1, 0xe5, 0x3b, 0xb1, 0x4f, 0xe9, 0xe7, 0x6b, 0x0c, 0xc3, 0x6b, 0x51,
+-      0x9d, 0x26, 0xe7, 0x60, 0xdc, 0xcd, 0xe4, 0x92, 0xfd, 0xef, 0xaa, 0xfa,
+-      0xe5, 0x70, 0x56, 0x2a, 0x57, 0x6c, 0xad, 0x85, 0xc9, 0xc8, 0x7b, 0x1e,
+-      0x65, 0x38, 0x73, 0x3e, 0x0e, 0x9c, 0x22, 0x77, 0xff, 0x60, 0xd4, 0xac,
+-      0xe9, 0x5f, 0xfb, 0xe9, 0x03, 0x27, 0xcb, 0x8d, 0x63, 0x68, 0xfd, 0x0c,
+-      0xae, 0x3d, 0x74, 0xd4, 0xec, 0x1f, 0xfa, 0xc3, 0x37, 0xbd, 0x4c, 0x94,
+-      0xcf, 0xe4, 0xbd, 0xcc, 0xd1, 0x52, 0x57, 0x38, 0xb7, 0x77, 0x7d, 0xbd,
+-      0xfe, 0x28, 0xc6, 0x8b, 0xcb, 0xe0, 0xe6, 0x84, 0xfa, 0xf1, 0xf3, 0x7b,
+-      0x7c, 0x56, 0x13, 0x1f, 0x30, 0x7e, 0xeb, 0x1b, 0xf2, 0xd8, 0x06, 0xe5,
+-      0x44, 0xfb, 0x1e, 0x92, 0x1f, 0x39, 0xc3, 0xf6, 0x93, 0x5a, 0x77, 0x9c,
+-      0xc8, 0x30, 0x1f, 0x73, 0xd0, 0x49, 0xda, 0x6b, 0x12, 0x19, 0xfd, 0x98,
+-      0xf0, 0x9b, 0x16, 0xd6, 0x7a, 0x0c, 0xbb, 0x4f, 0x4a, 0x50, 0xef, 0x31,
+-      0x94, 0x39, 0x10, 0xfa, 0xa7, 0xf7, 0xc6, 0x79, 0xde, 0x63, 0xea, 0x3d,
+-      0x24, 0x44, 0xb9, 0xfd, 0xf1, 0x0e, 0x7e, 0xe3, 0xb9, 0x37, 0xde, 0x77,
+-      0xff, 0xd3, 0xe7, 0xd2, 0x89, 0x25, 0xfa, 0xac, 0x2d, 0xce, 0xbf, 0xfa,
+-      0xcd, 0xbb, 0x16, 0x0a, 0x9d, 0xa2, 0xf9, 0xb2, 0x4b, 0xef, 0x38, 0xac,
+-      0x7b, 0x48, 0xc4, 0x0e, 0x58, 0x8c, 0x7b, 0x13, 0xdf, 0x98, 0x43, 0x61,
+-      0x8c, 0x0d, 0x6d, 0x70, 0x86, 0x97, 0x46, 0x2c, 0xb9, 0x3f, 0x92, 0x89,
+-      0x5b, 0x72, 0x2c, 0xbe, 0x22, 0x78, 0x26, 0xf3, 0x29, 0x1b, 0x89, 0x02,
+-      0xef, 0x8f, 0x94, 0x39, 0x5e, 0x5c, 0xfd, 0x93, 0xe4, 0x31, 0xcf, 0xbb,
+-      0xe4, 0x4a, 0x28, 0x79, 0xd7, 0xdb, 0x1e, 0x73, 0xde, 0xd6, 0xe6, 0xfb,
+-      0xd5, 0x23, 0x10, 0x37, 0x16, 0x9e, 0x32, 0xb5, 0x87, 0x4b, 0x97, 0x06,
+-      0x37, 0xf4, 0x9b, 0xb9, 0x69, 0xd3, 0x2e, 0xa1, 0xdd, 0xea, 0xd7, 0x41,
+-      0x55, 0x2e, 0x0d, 0x56, 0x8f, 0xdc, 0x6e, 0xfc, 0x6d, 0xf2, 0xab, 0xc0,
+-      0x87, 0x89, 0xef, 0xa9, 0x0b, 0x3b, 0xbb, 0x7c, 0x26, 0x74, 0x66, 0xd9,
+-      0x5a, 0x6d, 0x63, 0x0e, 0xec, 0x94, 0x27, 0xdd, 0x27, 0x83, 0x38, 0x15,
+-      0xe3, 0x5a, 0x22, 0x9d, 0x9b, 0x13, 0x26, 0xe7, 0xb1, 0x69, 0x29, 0x17,
+-      0xea, 0x7a, 0x89, 0xb1, 0xaa, 0xa8, 0x62, 0x43, 0xf7, 0x26, 0xeb, 0xc1,
+-      0x7a, 0x64, 0x46, 0x31, 0xa3, 0x47, 0xf1, 0xc0, 0xe8, 0x5d, 0x97, 0xc6,
+-      0x61, 0xc9, 0x97, 0xae, 0x2d, 0xbb, 0x03, 0xac, 0xe1, 0x79, 0x75, 0xf9,
+-      0x09, 0xb4, 0x89, 0x33, 0xf7, 0x34, 0x9d, 0x6f, 0xcc, 0xc9, 0x26, 0xec,
+-      0x41, 0xab, 0x39, 0x1f, 0xcb, 0x73, 0xcd, 0x79, 0xd8, 0x57, 0x25, 0xdf,
+-      0xcb, 0xdc, 0x6b, 0x10, 0x6f, 0x77, 0xfd, 0x78, 0xfb, 0x87, 0x06, 0xa8,
+-      0x83, 0xf0, 0x6f, 0xf2, 0x91, 0xb1, 0xb6, 0x91, 0xf9, 0x52, 0xf8, 0x1f,
+-      0xbb, 0xb1, 0x53, 0xb4, 0x37, 0x76, 0xf2, 0xe3, 0xb8, 0xf6, 0x25, 0x70,
+-      0x92, 0x22, 0xf8, 0x45, 0xc1, 0xaf, 0xc3, 0xe7, 0xf5, 0x9d, 0xfe, 0xb7,
+-      0x98, 0xd3, 0x41, 0xcd, 0xad, 0x0f, 0xee, 0xc9, 0xad, 0xdf, 0x35, 0xc0,
+-      0xda, 0xe3, 0xe2, 0xd6, 0x6e, 0xdf, 0x88, 0xdf, 0x77, 0xe2, 0x96, 0xef,
+-      0x63, 0xf6, 0x4c, 0x51, 0xf7, 0xcc, 0x65, 0x8d, 0x11, 0xcf, 0x6f, 0x2d,
+-      0xc9, 0x8c, 0xd3, 0x25, 0xb9, 0xd5, 0xc0, 0x4e, 0x78, 0xe3, 0xb3, 0x6e,
+-      0xa1, 0x2f, 0x2c, 0xec, 0xcf, 0xe7, 0x29, 0x47, 0x8b, 0xe5, 0xc2, 0x1c,
+-      0xff, 0x90, 0x44, 0xc6, 0x68, 0x3b, 0x68, 0x13, 0x3e, 0x05, 0x2c, 0x03,
+-      0x4f, 0xdf, 0x6a, 0xcc, 0x7d, 0xbf, 0x9f, 0x1c, 0x29, 0xc3, 0xe0, 0x9d,
+-      0x0b, 0x5e, 0x2b, 0xf6, 0xdf, 0x31, 0xd6, 0xb4, 0xec, 0xcc, 0x95, 0x36,
+-      0x4b, 0x6d, 0x93, 0xbe, 0xc7, 0x94, 0xff, 0x1e, 0x61, 0xcc, 0x67, 0xb6,
+-      0x14, 0xdc, 0x33, 0x27, 0xc7, 0x4f, 0x25, 0x62, 0x49, 0x4b, 0xe7, 0xa5,
+-      0xf6, 0x2b, 0xeb, 0xce, 0xc1, 0x2e, 0xd1, 0x86, 0x29, 0xae, 0x81, 0xab,
+-      0x12, 0xd7, 0x68, 0x9f, 0xd4, 0xa6, 0xc5, 0x8b, 0x98, 0x67, 0x6e, 0x4b,
+-      0xf3, 0x0f, 0xb1, 0xd3, 0xe1, 0x44, 0x65, 0x46, 0xb1, 0x0e, 0x7c, 0x55,
+-      0xe7, 0x0e, 0x7b, 0x1c, 0x6a, 0xcc, 0x2d, 0xd1, 0xbf, 0x64, 0x1e, 0xa6,
+-      0x43, 0xb2, 0x15, 0x91, 0x57, 0xa0, 0xdf, 0x57, 0xd7, 0xb9, 0xe7, 0xc2,
+-      0xbd, 0xc6, 0x47, 0xac, 0xdf, 0x63, 0x49, 0xaf, 0xe6, 0x6b, 0x8b, 0x58,
+-      0x2f, 0xf0, 0xab, 0xf1, 0xf0, 0x29, 0xf8, 0x09, 0x5a, 0x27, 0xc1, 0x18,
+-      0xeb, 0x2c, 0x7c, 0xca, 0xc6, 0xb8, 0x10, 0x30, 0x62, 0x9a, 0xe7, 0x67,
+-      0xc0, 0x8b, 0x77, 0x73, 0x35, 0xc5, 0xea, 0x82, 0xc6, 0x63, 0x6b, 0xeb,
+-      0x1d, 0x6a, 0x2f, 0x6a, 0xd5, 0x3e, 0xac, 0x8b, 0x1c, 0xb7, 0xc6, 0x8a,
+-      0xfe, 0xf9, 0x16, 0xa9, 0x56, 0xd9, 0x96, 0x81, 0x56, 0xd5, 0x97, 0x20,
+-      0x1f, 0x65, 0xcb, 0x1a, 0xb8, 0x6e, 0x75, 0xc3, 0xc1, 0x2f, 0x85, 0xdf,
+-      0x08, 0x7e, 0x0f, 0x4a, 0xb6, 0x4c, 0xfe, 0xcd, 0xfc, 0x53, 0x47, 0xd3,
+-      0xf3, 0x5b, 0xf4, 0xfb, 0x11, 0xd6, 0xb4, 0x15, 0x7d, 0x3f, 0xad, 0x58,
+-      0xdd, 0x8f, 0x9b, 0x32, 0xbe, 0x9b, 0xf2, 0xb1, 0xee, 0xa7, 0x7e, 0x6d,
+-      0xed, 0xbf, 0x01, 0x17, 0x24, 0x5e, 0x9d, 0xe0, 0x70, 0x00, 0x00, 0x00 };
++      0xec, 0x5b, 0x5f, 0x6c, 0x5b, 0xd7, 0x79, 0xff, 0xee, 0x21, 0x25, 0x51,
++      0xb2, 0xfe, 0x5c, 0xc9, 0x8c, 0x43, 0x27, 0x4a, 0x43, 0x4a, 0x57, 0x12,
++      0x13, 0x69, 0xe9, 0x95, 0xc6, 0x26, 0x2a, 0x46, 0x34, 0x2c, 0x29, 0xdb,
++      0x4a, 0xe3, 0x07, 0xc5, 0xf5, 0xda, 0xac, 0xeb, 0x30, 0x81, 0xb2, 0xb1,
++      0xec, 0x61, 0x83, 0x67, 0xac, 0x41, 0xb6, 0xb9, 0x30, 0x41, 0x29, 0x8e,
++      0x92, 0xd2, 0x22, 0x67, 0x2b, 0x73, 0xb1, 0x65, 0x80, 0x42, 0x49, 0x76,
++      0xb6, 0xd1, 0x62, 0xda, 0xbd, 0x74, 0x45, 0x1c, 0x0b, 0x8a, 0xe7, 0xe5,
++      0xa1, 0x0f, 0x69, 0x17, 0x60, 0xed, 0xd0, 0x61, 0x86, 0xe2, 0xda, 0x79,
++      0x28, 0xb6, 0x6c, 0x40, 0x96, 0x6c, 0x71, 0x73, 0xf7, 0xfb, 0x9d, 0x7b,
++      0xaf, 0x4c, 0x2b, 0x1a, 0x9a, 0x87, 0x3d, 0xde, 0x03, 0x08, 0xe7, 0x9e,
++      0x73, 0xbe, 0xf3, 0x9d, 0xef, 0xfb, 0xce, 0xf7, 0xf7, 0xd0, 0xfe, 0xc3,
++      0x76, 0x69, 0x13, 0xaf, 0x75, 0xe0, 0x2f, 0x75, 0xec, 0x99, 0xe3, 0x63,
++      0x0f, 0xa5, 0x1e, 0xe2, 0x38, 0xa4, 0xc2, 0x61, 0xf6, 0x86, 0x04, 0x2d,
++      0x68, 0x41, 0x0b, 0x5a, 0xd0, 0x82, 0x16, 0xb4, 0xa0, 0x05, 0x2d, 0x68,
++      0x41, 0x0b, 0x5a, 0xd0, 0x82, 0x16, 0xb4, 0xa0, 0x05, 0x2d, 0x68, 0x41,
++      0x0b, 0x5a, 0xd0, 0x82, 0x16, 0xb4, 0xa0, 0x05, 0x2d, 0x68, 0x41, 0x0b,
++      0x5a, 0xd0, 0x82, 0x16, 0xb4, 0xa0, 0x05, 0x2d, 0x68, 0x41, 0x0b, 0x5a,
++      0xd0, 0x82, 0x16, 0xb4, 0xa0, 0x05, 0x2d, 0x68, 0x41, 0x0b, 0x5a, 0xd0,
++      0x82, 0x16, 0xb4, 0xa0, 0x05, 0xed, 0xff, 0xb3, 0x85, 0x44, 0x4c, 0xf6,
++      0x1d, 0xde, 0x9f, 0x44, 0x54, 0x3a, 0x7e, 0x3c, 0x6b, 0x49, 0x24, 0x94,
++      0xbe, 0xf2, 0xf4, 0x8c, 0x25, 0x92, 0xa9, 0x0d, 0xc7, 0x73, 0xf2, 0x0b,
++      0xa7, 0x10, 0x0d, 0x0b, 0xe7, 0xef, 0x4b, 0xdf, 0x3a, 0x79, 0xe9, 0x91,
++      0xc4, 0x7b, 0x4b, 0x21, 0x89, 0x98, 0xe9, 0xb7, 0x46, 0xcd, 0x41, 0x89,
++      0xf4, 0x62, 0xcf, 0x4b, 0x43, 0x97, 0xbb, 0xa4, 0xd3, 0xc7, 0x25, 0x52,
++      0x2d, 0x25, 0xec, 0xfd, 0x32, 0x6c, 0x6e, 0x48, 0x58, 0x32, 0x38, 0xe3,
++      0x7c, 0x4d, 0xa4, 0x58, 0x32, 0x88, 0x43, 0x8a, 0xb5, 0x88, 0x5c, 0x0b,
++      0x11, 0xea, 0x7b, 0x46, 0xb6, 0xfc, 0xb1, 0x93, 0x09, 0xe3, 0x5c, 0x0b,
++      0xdf, 0x75, 0x7f, 0x3e, 0x22, 0x2a, 0x9d, 0x48, 0x66, 0x43, 0x93, 0x52,
++      0x5d, 0x74, 0x9c, 0x39, 0xfb, 0x5e, 0xe0, 0xe8, 0x91, 0x39, 0xcb, 0x1d,
++      0x67, 0xed, 0x07, 0xcd, 0x09, 0xb9, 0x1b, 0x73, 0x21, 0x51, 0xd6, 0x3d,
++      0xf8, 0x8b, 0x1b, 0xb9, 0xb3, 0xdf, 0x32, 0xb2, 0xcb, 0xed, 0x52, 0x2c,
++      0x3b, 0x32, 0x63, 0x4b, 0x26, 0x6b, 0xb7, 0x62, 0xfd, 0x63, 0x67, 0x66,
++      0x6b, 0xcf, 0xb0, 0x99, 0x93, 0x26, 0xc9, 0x44, 0x63, 0x80, 0x59, 0x34,
++      0x72, 0x17, 0xfe, 0xae, 0x5d, 0xda, 0x40, 0x4f, 0x8a, 0xe3, 0x8f, 0x9d,
++      0x90, 0x65, 0x61, 0x9d, 0xe7, 0x63, 0x5c, 0x27, 0x5e, 0x7e, 0x13, 0xe7,
++      0x35, 0xe7, 0xd2, 0x50, 0x4c, 0xbe, 0x5b, 0x8f, 0xca, 0x77, 0xea, 0xa6,
++      0xbc, 0x5a, 0xef, 0x95, 0xcb, 0x75, 0xc7, 0xf9, 0x8e, 0xed, 0x38, 0x6f,
++      0xe1, 0xef, 0x3f, 0xed, 0x2d, 0x1e, 0xd0, 0x0a, 0xc6, 0x44, 0xfd, 0x2f,
++      0xda, 0xa5, 0x33, 0x11, 0x17, 0xd5, 0x2e, 0xb3, 0xe5, 0x98, 0xcc, 0x95,
++      0x4b, 0xc6, 0x13, 0x17, 0x16, 0x8c, 0xa9, 0x0b, 0x15, 0x9c, 0x19, 0xc6,
++      0x9c, 0x14, 0x8a, 0xf6, 0x2b, 0x46, 0xae, 0x3e, 0x6f, 0x1c, 0xba, 0xd0,
++      0x09, 0x1a, 0x79, 0xfe, 0x1e, 0x23, 0x7b, 0xf6, 0x96, 0x64, 0x6d, 0xca,
++      0x38, 0x61, 0x7e, 0x0d, 0x62, 0xcf, 0x96, 0x48, 0x73, 0xb3, 0x47, 0xaf,
++      0xe3, 0xa8, 0xb4, 0x73, 0x32, 0x9b, 0xb2, 0xcc, 0xa2, 0x90, 0x3e, 0x3d,
++      0x77, 0xd9, 0xa5, 0xf9, 0xbc, 0x91, 0xbd, 0xd0, 0x6e, 0xe4, 0xce, 0x85,
++      0x41, 0x87, 0xf4, 0x86, 0x84, 0xfb, 0x06, 0x62, 0x79, 0xa9, 0xe1, 0x0c,
++      0x31, 0x55, 0x9a, 0x72, 0x05, 0xcd, 0xa0, 0xe5, 0xbb, 0x65, 0xf0, 0x50,
++      0x06, 0x0f, 0x65, 0xf2, 0x16, 0x97, 0x4b, 0x43, 0x3e, 0x6f, 0x8e, 0xf3,
++      0x23, 0x9b, 0xb4, 0x27, 0xe2, 0x19, 0xe5, 0xf3, 0xe9, 0x38, 0xff, 0x61,
++      0x93, 0x57, 0xf2, 0xe3, 0x38, 0xaf, 0xda, 0x31, 0xd0, 0xee, 0x5c, 0x56,
++      0x56, 0x09, 0xbc, 0x58, 0xc0, 0x4f, 0x59, 0x2f, 0x80, 0x87, 0x79, 0xf0,
++      0x77, 0x1e, 0xbc, 0x55, 0x40, 0xc7, 0x2f, 0x3b, 0xaf, 0x60, 0xe4, 0x86,
++      0xb6, 0xe4, 0x15, 0xa7, 0x8c, 0xf3, 0x2b, 0x0a, 0xb2, 0xde, 0x25, 0xf9,
++      0x25, 0x53, 0xa6, 0x57, 0xfc, 0xfd, 0xbe, 0x1e, 0x1c, 0x93, 0x83, 0xe5,
++      0x1e, 0xc8, 0x86, 0xb2, 0x4c, 0xd8, 0x22, 0x0e, 0x64, 0x54, 0x4c, 0x2a,
++      0x11, 0x23, 0x6f, 0x9f, 0xd4, 0xf7, 0xbf, 0x62, 0x49, 0x26, 0x6f, 0x53,
++      0x8e, 0x12, 0xcf, 0xdb, 0x85, 0x58, 0x18, 0xfa, 0xb6, 0x62, 0x15, 0xcc,
++      0xb0, 0x50, 0x8e, 0x89, 0xd8, 0x1f, 0x43, 0x96, 0x47, 0x4b, 0x92, 0xf9,
++      0x52, 0xc9, 0x97, 0xb1, 0x2b, 0xdf, 0xc7, 0x4b, 0x5f, 0xec, 0x90, 0x36,
++      0xf5, 0x99, 0x26, 0xf9, 0x3d, 0xec, 0x25, 0xee, 0x3b, 0xf6, 0x62, 0x9f,
++      0x0b, 0xe7, 0xee, 0x4d, 0x3c, 0x29, 0x42, 0xd8, 0x62, 0x7f, 0x93, 0xb6,
++      0x11, 0x31, 0xb2, 0x56, 0x21, 0x16, 0x02, 0x5c, 0x5e, 0x8a, 0xa3, 0xde,
++      0x5c, 0x53, 0xd6, 0xba, 0x15, 0x9a, 0xb3, 0x13, 0xf1, 0xa2, 0xdc, 0x0a,
++      0x5d, 0xb5, 0xf5, 0x5c, 0x6b, 0xd6, 0x72, 0x64, 0x15, 0xd8, 0x9f, 0x83,
++      0x3d, 0x6c, 0x80, 0xa3, 0xdf, 0x2d, 0xe9, 0xf9, 0x0e, 0xec, 0x4f, 0x36,
++      0x01, 0x67, 0x9b, 0x24, 0x92, 0x55, 0xcc, 0x5f, 0x75, 0xe7, 0xbb, 0x5d,
++      0xbc, 0xc5, 0xfe, 0x36, 0x8d, 0x5b, 0xe4, 0x15, 0x77, 0xfe, 0x2e, 0x17,
++      0x77, 0xf1, 0x01, 0xcc, 0x03, 0xff, 0xe0, 0xe4, 0x90, 0xa1, 0xe7, 0xf7,
++      0xd2, 0x9e, 0x7e, 0xa7, 0x74, 0x2b, 0xb4, 0x6a, 0x3b, 0x92, 0x1b, 0x1d,
++      0x9c, 0x1c, 0x34, 0x5c, 0x7c, 0xa7, 0xdc, 0x7d, 0xf7, 0xb9, 0xf8, 0x06,
++      0x27, 0x93, 0x86, 0x8b, 0x6f, 0xa5, 0xa4, 0xf7, 0x4a, 0xbe, 0x44, 0xd8,
++      0xc1, 0x49, 0xcb, 0xb8, 0x4f, 0xa6, 0xbb, 0x07, 0x27, 0xfb, 0x0c, 0xf5,
++      0x99, 0x5d, 0x2e, 0x1f, 0x09, 0x9f, 0x86, 0x5d, 0x9a, 0x06, 0x9e, 0xab,
++      0xe7, 0x07, 0xb2, 0x56, 0xf1, 0x81, 0x5d, 0xfa, 0x7c, 0x9e, 0xa9, 0xe7,
++      0x1e, 0x20, 0x5d, 0x3c, 0x7b, 0x66, 0xf4, 0x8e, 0x73, 0x7f, 0xe5, 0xb6,
++      0x7c, 0x76, 0x3a, 0x93, 0xe7, 0x49, 0x24, 0x9c, 0x0e, 0x8f, 0xce, 0x95,
++      0x8e, 0x49, 0xb6, 0x1c, 0x97, 0xd9, 0x91, 0x56, 0x99, 0x36, 0xfb, 0xa7,
++      0x0f, 0x0a, 0x7d, 0x4f, 0x64, 0x74, 0xc6, 0xbb, 0xc3, 0x9c, 0x18, 0x32,
++      0x0b, 0x1e, 0x0f, 0xd6, 0x24, 0x62, 0x00, 0xbe, 0xbf, 0x16, 0x96, 0xe7,
++      0xeb, 0x86, 0x34, 0x6b, 0xfb, 0x4c, 0x98, 0xeb, 0xd0, 0xc3, 0x67, 0xcb,
++      0xd4, 0x63, 0xea, 0xac, 0x64, 0xaa, 0x5a, 0x67, 0x7d, 0x7b, 0x6d, 0xe3,
++      0xdd, 0x16, 0x0a, 0x02, 0x73, 0x4c, 0x5b, 0x66, 0x55, 0x5a, 0x24, 0x33,
++      0x25, 0x85, 0xaa, 0xbd, 0x65, 0x3f, 0xb1, 0x65, 0xd9, 0x80, 0x1e, 0x88,
++      0x99, 0x4d, 0x71, 0x9e, 0xf0, 0x0d, 0xb0, 0xa6, 0x6b, 0x7b, 0x21, 0xd8,
++      0xde, 0x4c, 0x8a, 0xb0, 0x52, 0xd0, 0xfe, 0xa2, 0x0e, 0x7d, 0xac, 0xdf,
++      0xd7, 0xe1, 0xfa, 0xbb, 0x08, 0x6c, 0xb4, 0x1d, 0x76, 0xfe, 0x19, 0xd8,
++      0x60, 0xaf, 0x91, 0x3d, 0xe7, 0x38, 0xf0, 0x3f, 0x51, 0x25, 0xb4, 0x41,
++      0xd8, 0x7b, 0x9d, 0x6b, 0xed, 0x98, 0x17, 0x73, 0xd6, 0xee, 0x06, 0x8f,
++      0x8e, 0x33, 0x69, 0xc7, 0xa5, 0x68, 0x77, 0x61, 0x5f, 0x93, 0xf4, 0x58,
++      0xd4, 0x79, 0xda, 0xf5, 0x2e, 0x9c, 0x67, 0x70, 0xdc, 0x89, 0xf3, 0x3a,
++      0x30, 0x17, 0x9b, 0xa5, 0x2d, 0xa7, 0xe8, 0xb7, 0x5c, 0x1f, 0x2a, 0x72,
++      0x1d, 0xb4, 0x72, 0x8f, 0x86, 0x8b, 0xb4, 0xa4, 0x53, 0x72, 0xb3, 0xb4,
++      0x57, 0xae, 0x45, 0x29, 0x03, 0xe0, 0x2c, 0xc3, 0x27, 0x46, 0x0d, 0xd0,
++      0x4f, 0xba, 0xe9, 0x03, 0x77, 0x7b, 0x63, 0xe3, 0x7e, 0xf7, 0x0c, 0x31,
++      0x43, 0xe9, 0x4e, 0xc9, 0xe9, 0x39, 0x51, 0x6a, 0x74, 0x97, 0xb7, 0xde,
++      0x69, 0xec, 0x3f, 0xa7, 0xe4, 0xc0, 0xc3, 0xf0, 0x5b, 0x38, 0xeb, 0xaa,
++      0xe5, 0x38, 0x57, 0xed, 0xf7, 0x61, 0xf7, 0x4a, 0x9a, 0xac, 0x6b, 0x9d,
++      0xd2, 0x46, 0x7b, 0x36, 0x1a, 0x64, 0x18, 0x93, 0x53, 0x65, 0xee, 0x29,
++      0x48, 0xd8, 0x22, 0x0c, 0xe1, 0xff, 0x05, 0x70, 0x21, 0x69, 0x81, 0x3d,
++      0x6e, 0xd8, 0x51, 0xd2, 0xdb, 0xe5, 0xc2, 0x77, 0xe3, 0x0c, 0xd2, 0x4e,
++      0xfb, 0x73, 0xb4, 0xfd, 0x65, 0x43, 0x2a, 0x33, 0xb1, 0x08, 0x6b, 0x1a,
++      0xa1, 0xbc, 0xb3, 0xdd, 0x70, 0xff, 0x32, 0x3b, 0x54, 0x30, 0x95, 0xbe,
++      0x6f, 0x91, 0x5c, 0xe9, 0x7e, 0x99, 0xb3, 0x71, 0x9e, 0x15, 0x06, 0xcd,
++      0xf4, 0x35, 0x03, 0x85, 0x90, 0x82, 0x95, 0xf5, 0x50, 0x56, 0x3e, 0xad,
++      0xff, 0x8c, 0xf3, 0x0a, 0x46, 0xd8, 0xe2, 0x19, 0xbf, 0xe5, 0xc9, 0x87,
++      0xba, 0x67, 0x4b, 0xb6, 0xd4, 0xce, 0x31, 0xe8, 0x68, 0xd3, 0x74, 0x84,
++      0xd2, 0xfa, 0xee, 0x0c, 0x95, 0xf6, 0x63, 0x00, 0x41, 0xef, 0xc0, 0x03,
++      0x3e, 0xb8, 0xd7, 0xc2, 0xde, 0x08, 0x68, 0xec, 0x68, 0xa0, 0xbf, 0x8d,
++      0xf0, 0x90, 0x55, 0xc4, 0x3b, 0x43, 0xf3, 0x6d, 0xb8, 0x7c, 0xfb, 0xb2,
++      0x7a, 0x1d, 0xb2, 0xfa, 0xc8, 0x39, 0x30, 0x46, 0x1c, 0x29, 0xe0, 0x80,
++      0xdc, 0x4d, 0xfa, 0x2c, 0xfa, 0x29, 0x73, 0x0b, 0x17, 0x6c, 0x41, 0x85,
++      0xd2, 0xed, 0x92, 0x33, 0x75, 0x1c, 0x00, 0xec, 0xb8, 0x68, 0x3f, 0x6f,
++      0x91, 0x47, 0x6f, 0x6c, 0x25, 0xb4, 0xde, 0xe4, 0x2b, 0x8c, 0x05, 0x45,
++      0xd0, 0xb6, 0x9e, 0x50, 0x9a, 0xb5, 0x76, 0xc8, 0x5c, 0x22, 0x4d, 0xe9,
++      0xb7, 0x64, 0xb5, 0xa4, 0xf6, 0x34, 0x4b, 0x97, 0x4c, 0x41, 0x46, 0xd5,
++      0x71, 0xc4, 0xb0, 0x91, 0x76, 0x09, 0x3d, 0xc4, 0x58, 0x10, 0x03, 0xad,
++      0xeb, 0x09, 0x53, 0x6e, 0x39, 0x6a, 0x10, 0xfb, 0x47, 0x70, 0x0f, 0x87,
++      0x79, 0xa7, 0xca, 0x83, 0x23, 0x4c, 0x88, 0x32, 0xef, 0x69, 0x16, 0xe2,
++      0xe6, 0xda, 0x70, 0xcc, 0x14, 0xce, 0x23, 0x5e, 0x4e, 0x71, 0x2f, 0xf9,
++      0x73, 0xf7, 0x7c, 0x92, 0x3f, 0x7f, 0x9d, 0x32, 0xa3, 0xec, 0xa0, 0x63,
++      0xa0, 0xa9, 0x1b, 0x72, 0x1b, 0x5d, 0x80, 0x4f, 0xb4, 0x1f, 0xd7, 0x3a,
++      0xdc, 0x37, 0x76, 0xaf, 0x5c, 0x83, 0xdd, 0xc5, 0x95, 0x18, 0x55, 0x7b,
++      0xaf, 0x9e, 0x53, 0x96, 0x2f, 0x4f, 0xca, 0x60, 0xf7, 0x36, 0x19, 0x10,
++      0xe7, 0xce, 0x72, 0x38, 0x52, 0x21, 0x0d, 0x2e, 0x2d, 0x73, 0xd6, 0x7a,
++      0x22, 0x2c, 0x8d, 0xf4, 0x7c, 0xec, 0x28, 0xcb, 0x2a, 0xf4, 0x29, 0xe2,
++      0x6f, 0x16, 0xb5, 0x27, 0x2c, 0x4f, 0x8c, 0x19, 0x12, 0x3f, 0xa4, 0xe4,
++      0xd0, 0xc3, 0xc4, 0xf9, 0x13, 0xf2, 0x38, 0x9e, 0xe1, 0xfa, 0x18, 0x75,
++      0x21, 0x8c, 0x5e, 0xf3, 0x87, 0xb9, 0x46, 0x5d, 0x7f, 0xdd, 0xd3, 0xf5,
++      0x8f, 0x9c, 0x43, 0x63, 0x61, 0x0f, 0x36, 0xd2, 0x00, 0x2b, 0xb8, 0xef,
++      0x9d, 0x60, 0x09, 0xd3, 0xa8, 0x17, 0x84, 0x2d, 0xec, 0x00, 0x8b, 0xe0,
++      0xf4, 0x15, 0xda, 0x50, 0xb7, 0xe7, 0x33, 0x7c, 0x9b, 0xe2, 0x39, 0xec,
++      0x77, 0xb2, 0x3f, 0xee, 0xe3, 0x7e, 0xc2, 0x6f, 0x8f, 0xa7, 0xb8, 0x06,
++      0xd9, 0x31, 0xa6, 0xa2, 0x4d, 0xe2, 0x5b, 0xc1, 0xff, 0x34, 0xc6, 0x56,
++      0xce, 0x99, 0x18, 0x4f, 0xa0, 0xb7, 0x24, 0x5f, 0xa3, 0x1d, 0x71, 0x3f,
++      0x63, 0xed, 0xbb, 0x9e, 0xef, 0x6c, 0x9f, 0x0e, 0xa7, 0xa3, 0xf0, 0x9d,
++      0x32, 0x55, 0x2c, 0x9d, 0x44, 0x3e, 0x24, 0x85, 0x7b, 0xd2, 0xd4, 0x8b,
++      0xf6, 0x71, 0xf8, 0xc6, 0xa9, 0x62, 0x8d, 0x39, 0x11, 0xdc, 0x17, 0xf6,
++      0x21, 0x3e, 0x47, 0xd4, 0x42, 0xa4, 0x70, 0x6f, 0x9a, 0x3e, 0x39, 0x2e,
++      0xf1, 0xda, 0x7b, 0xc8, 0x39, 0x4c, 0xc9, 0x6a, 0x1d, 0xfb, 0xf6, 0x5e,
++      0xd2, 0x5c, 0x44, 0xfe, 0x10, 0x4e, 0x4b, 0x58, 0xa5, 0x9b, 0x23, 0xb3,
++      0xa9, 0x76, 0xe4, 0x59, 0x93, 0x7b, 0xd5, 0xda, 0xc1, 0xbd, 0xa1, 0xb5,
++      0x3d, 0xd3, 0x4d, 0xe9, 0xc2, 0x5e, 0xb5, 0x20, 0xb2, 0x5c, 0x12, 0x85,
++      0x9c, 0x26, 0x76, 0x44, 0x30, 0x5e, 0xfb, 0xf2, 0x97, 0x55, 0x3a, 0x24,
++      0xf9, 0xa8, 0x9c, 0x58, 0x49, 0x85, 0x99, 0x3f, 0xc6, 0xa7, 0xe4, 0x04,
++      0x72, 0xc6, 0x67, 0x64, 0xb6, 0x04, 0xba, 0x34, 0xdf, 0x31, 0xf0, 0xdb,
++      0x0b, 0xdc, 0xa4, 0x3d, 0x0a, 0xdf, 0xea, 0xd2, 0x0e, 0x9a, 0x33, 0x39,
++      0xe6, 0x48, 0x29, 0xc6, 0x94, 0xf7, 0xa0, 0x27, 0xb4, 0x93, 0x9f, 0xcb,
++      0xaa, 0xd5, 0x2a, 0x79, 0xd7, 0x2f, 0x68, 0x3d, 0x0d, 0xa7, 0xdf, 0xf5,
++      0xd6, 0xae, 0x63, 0x8d, 0xfa, 0xba, 0xab, 0xe1, 0xee, 0xbe, 0xa5, 0xf3,
++      0x9c, 0xab, 0x36, 0xbf, 0x09, 0xfb, 0x83, 0x51, 0x17, 0xf6, 0xcd, 0xd1,
++      0x55, 0xeb, 0x2b, 0x5d, 0xd2, 0x86, 0x73, 0xca, 0x3c, 0x27, 0x4a, 0xdf,
++      0x8a, 0xf5, 0x6b, 0x1e, 0xae, 0x9f, 0x02, 0x57, 0x3b, 0xe9, 0x46, 0x0b,
++      0x63, 0x1d, 0xf4, 0x21, 0xdf, 0xc9, 0x6f, 0xf9, 0x18, 0xc2, 0xbe, 0xe6,
++      0xe1, 0xfa, 0x5e, 0x03, 0x2e, 0xae, 0xb1, 0xe7, 0x99, 0x38, 0xbb, 0x8d,
++      0xbc, 0x91, 0x1f, 0xde, 0x01, 0xef, 0x23, 0x69, 0x4c, 0xc1, 0xa7, 0x4f,
++      0xd5, 0x75, 0x5e, 0x67, 0xe4, 0xca, 0xc8, 0xb7, 0xea, 0x2f, 0x82, 0x46,
++      0xe4, 0x61, 0xf5, 0x01, 0x2f, 0xd7, 0xa6, 0xad, 0xac, 0x6b, 0x9f, 0x45,
++      0x7f, 0x53, 0xd4, 0xf6, 0x74, 0x05, 0x63, 0x9d, 0x67, 0xe3, 0x6e, 0xae,
++      0x48, 0x5f, 0xad, 0xdc, 0xe5, 0xfe, 0xbf, 0x6d, 0x53, 0x42, 0xfa, 0x3e,
++      0x19, 0xd7, 0xa8, 0x67, 0x77, 0xc3, 0x9f, 0x3b, 0x1f, 0x30, 0xbe, 0x4c,
++      0x31, 0xf6, 0x4c, 0x31, 0x66, 0x18, 0x9e, 0x1f, 0x8c, 0x37, 0xe0, 0x88,
++      0x03, 0xc7, 0x79, 0x4f, 0x6f, 0x4f, 0x7b, 0xb8, 0xfc, 0xdc, 0xd3, 0xf7,
++      0xa5, 0x2f, 0xdd, 0x73, 0xe7, 0xba, 0x61, 0xba, 0xe3, 0x66, 0xed, 0x87,
++      0x61, 0xf7, 0xa0, 0x3f, 0x3e, 0xad, 0xa0, 0x5f, 0xb9, 0x9a, 0x7b, 0x1f,
++      0xb0, 0x71, 0xe8, 0x1e, 0x3f, 0xfd, 0xbb, 0x75, 0x73, 0x6f, 0x57, 0x06,
++      0xbc, 0xd3, 0x0c, 0xf9, 0xce, 0x84, 0x49, 0x4b, 0x7d, 0x12, 0xfb, 0xe5,
++      0x18, 0x63, 0x62, 0x1e, 0x7c, 0x1c, 0x31, 0x87, 0xcd, 0x59, 0xe2, 0x8e,
++      0x0a, 0x70, 0x22, 0x8f, 0x4c, 0xb7, 0x78, 0xf7, 0xfc, 0x7d, 0x9e, 0x0f,
++      0xdc, 0xbb, 0x38, 0x46, 0xff, 0x7d, 0x8f, 0x9e, 0x1b, 0x9d, 0x2e, 0x3d,
++      0xfe, 0xfa, 0x80, 0x79, 0xe7, 0x78, 0x75, 0xaf, 0x27, 0x4f, 0x7c, 0x3f,
++      0xe3, 0xd1, 0xc5, 0xbb, 0x69, 0xa4, 0x89, 0xf7, 0xf2, 0x5f, 0xc0, 0xa3,
++      0xf3, 0x8c, 0x82, 0x4a, 0x23, 0x6f, 0x49, 0x31, 0x56, 0xc1, 0xe6, 0xc5,
++      0xc2, 0x9d, 0x24, 0xec, 0x69, 0xec, 0x7a, 0xb7, 0xc4, 0x7b, 0xbe, 0x05,
++      0x1f, 0xcd, 0x7b, 0xff, 0x50, 0xe6, 0x4a, 0xfd, 0x76, 0xb3, 0x41, 0x7b,
++      0x4d, 0x24, 0xcf, 0xcb, 0xb0, 0x7d, 0x5e, 0xe7, 0x4f, 0x89, 0xf8, 0x29,
++      0xa1, 0x6c, 0x6f, 0xc9, 0x80, 0xce, 0x6b, 0x3e, 0x14, 0x0b, 0x72, 0x99,
++      0x2a, 0xc3, 0xc6, 0xc6, 0xfe, 0xcd, 0xd1, 0xf9, 0x28, 0xf2, 0xa5, 0x1b,
++      0x3b, 0xe0, 0x7a, 0x53, 0xe3, 0x21, 0xbe, 0x46, 0x5c, 0x86, 0xb4, 0x8c,
++      0xf9, 0xf8, 0x2c, 0x99, 0xaf, 0xfb, 0x38, 0xc3, 0xf0, 0xc3, 0xf0, 0x01,
++      0x63, 0xbf, 0xe1, 0xe9, 0x0b, 0xbf, 0x7f, 0xe8, 0x30, 0x07, 0x52, 0xe9,
++      0x3f, 0xf7, 0xe6, 0xae, 0x50, 0x06, 0x18, 0xfb, 0x72, 0x7f, 0xd1, 0xf3,
++      0x39, 0x05, 0x23, 0x53, 0xa7, 0x0c, 0xa8, 0x2b, 0xb8, 0x7f, 0xad, 0x9f,
++      0xb0, 0x99, 0xf2, 0x17, 0x10, 0x1f, 0xbb, 0xdd, 0xbc, 0x01, 0xb5, 0x55,
++      0xa6, 0xce, 0xb9, 0xf5, 0x96, 0xac, 0xdd, 0xe4, 0xd9, 0xd2, 0x41, 0xcc,
++      0x4d, 0xe1, 0x8f, 0xb2, 0x23, 0xcc, 0x61, 0x7c, 0x67, 0x3c, 0x38, 0x19,
++      0xcf, 0x22, 0x66, 0x65, 0x0e, 0x4f, 0x60, 0x6c, 0x78, 0x35, 0x96, 0x96,
++      0x7b, 0x05, 0x39, 0x0a, 0xe4, 0x39, 0x00, 0x7e, 0xe2, 0x32, 0x51, 0xc7,
++      0x9d, 0x6f, 0xf9, 0xb3, 0x2d, 0x98, 0xc2, 0x6d, 0x18, 0xd7, 0xf7, 0x4d,
++      0xd4, 0x7f, 0xec, 0xd0, 0x1f, 0xfc, 0xad, 0xb6, 0x97, 0x78, 0x43, 0xde,
++      0x97, 0x31, 0x9e, 0x28, 0x4f, 0x1a, 0x87, 0xca, 0xdc, 0xa3, 0x5e, 0xea,
++      0x11, 0x2b, 0x9e, 0x55, 0xc8, 0x51, 0xc7, 0x3a, 0x71, 0xe6, 0x29, 0xe8,
++      0x46, 0xc1, 0x98, 0x1a, 0xea, 0x92, 0x7c, 0xb2, 0x07, 0x34, 0x3f, 0x82,
++      0x1e, 0xb1, 0xc3, 0xfa, 0x35, 0xcc, 0x43, 0x8f, 0x92, 0xb4, 0x8f, 0x56,
++      0x5d, 0x57, 0x4e, 0xeb, 0xb8, 0x35, 0xe0, 0xe9, 0xd6, 0x3f, 0x99, 0xae,
++      0x2e, 0x3d, 0x8d, 0xf1, 0x2e, 0xcc, 0xff, 0x26, 0x7a, 0xc4, 0xac, 0x31,
++      0x7f, 0x9e, 0x36, 0x38, 0x8e, 0xf9, 0xcf, 0x01, 0xc7, 0x9f, 0xe0, 0xfb,
++      0x7e, 0x7c, 0xff, 0xd1, 0xb6, 0xbd, 0xdf, 0xe0, 0xd9, 0x98, 0xcf, 0x6e,
++      0x9b, 0xf7, 0xfd, 0xb7, 0x8e, 0x93, 0xd2, 0xbd, 0x06, 0xc6, 0xd7, 0x22,
++      0xb2, 0xfb, 0x7c, 0x9b, 0xa8, 0xaa, 0xeb, 0xc3, 0x55, 0xd5, 0x94, 0x9e,
++      0xf3, 0xf4, 0xdf, 0x3f, 0xc2, 0x1e, 0x4b, 0xd4, 0x1a, 0x2e, 0x8d, 0x77,
++      0xab, 0x6d, 0xf4, 0x99, 0xe3, 0x7d, 0x4b, 0xec, 0x0b, 0xc7, 0x47, 0x6b,
++      0x84, 0xe1, 0xf7, 0x89, 0xe3, 0x7d, 0xb5, 0x9f, 0x00, 0x16, 0x72, 0x29,
++      0xfb, 0xf8, 0x09, 0xff, 0xda, 0xb6, 0x33, 0xb5, 0x6c, 0x71, 0x26, 0xed,
++      0xfe, 0x99, 0xe3, 0xd9, 0x0a, 0xf3, 0x83, 0x44, 0x4c, 0x74, 0x1e, 0x5e,
++      0x38, 0x3e, 0x53, 0x0a, 0x4b, 0x48, 0xd3, 0xe2, 0xaf, 0x73, 0x8d, 0xf7,
++      0xb0, 0x13, 0x6d, 0xa4, 0xab, 0x11, 0x0f, 0xe3, 0x0c, 0xf1, 0x9c, 0x00,
++      0x9e, 0x24, 0xf0, 0x30, 0xde, 0xb8, 0xf4, 0xc6, 0x97, 0x76, 0xa2, 0x8d,
++      0xb8, 0x78, 0x96, 0x8f, 0xaf, 0x47, 0xd4, 0xf9, 0xb7, 0x49, 0xaf, 0xc9,
++      0x9c, 0xd6, 0xf5, 0x35, 0x4d, 0x92, 0x3f, 0x8b, 0xdc, 0xc6, 0x1e, 0xf3,
++      0xc6, 0x77, 0x9b, 0xac, 0xb7, 0xe3, 0x8a, 0xf3, 0xec, 0xb1, 0x96, 0x8a,
++      0x63, 0x0e, 0xe3, 0x65, 0x1f, 0x56, 0x79, 0xb0, 0x1d, 0x0d, 0x7c, 0x37,
++      0x79, 0xb2, 0xe6, 0x99, 0x7e, 0xdd, 0xd9, 0x48, 0x0b, 0x40, 0x71, 0x0f,
++      0xdd, 0x5b, 0xf7, 0xe0, 0xf3, 0x89, 0x85, 0x35, 0xd2, 0x96, 0x04, 0xaf,
++      0x3e, 0x6d, 0x9f, 0xf6, 0xfe, 0xb8, 0x37, 0x89, 0x3f, 0xff, 0x3c, 0x5f,
++      0x06, 0xa4, 0x8b, 0x3d, 0x74, 0xf9, 0x13, 0x75, 0x73, 0x12, 0x76, 0xc7,
++      0x37, 0x10, 0xc7, 0x59, 0xb5, 0x29, 0xfb, 0x16, 0xdc, 0xbb, 0xf6, 0xb1,
++      0xa8, 0x21, 0x14, 0x73, 0xb9, 0x38, 0xeb, 0xd5, 0xa3, 0xb2, 0x09, 0x5c,
++      0x19, 0xd4, 0x94, 0x6e, 0x5d, 0x34, 0x0d, 0xff, 0xb8, 0x0e, 0xfd, 0xbc,
++      0x6a, 0xf1, 0x2d, 0x26, 0xcc, 0x78, 0x27, 0xc5, 0xda, 0xcf, 0x01, 0xc3,
++      0x3c, 0xea, 0xf6, 0x3b, 0xcb, 0x12, 0x60, 0x96, 0xb1, 0x76, 0xca, 0xf5,
++      0xcb, 0xf4, 0xed, 0xc8, 0xa9, 0x50, 0xc3, 0x58, 0xff, 0xe3, 0xe4, 0xa3,
++      0x8d, 0xb0, 0x3b, 0xbd, 0x83, 0x20, 0xe6, 0x2c, 0x26, 0xe6, 0x97, 0xe0,
++      0xc3, 0x2b, 0x96, 0xda, 0xad, 0xb4, 0x46, 0x26, 0x2a, 0xf0, 0x49, 0xa8,
++      0x78, 0x13, 0xf1, 0x25, 0x79, 0x5f, 0xdf, 0x43, 0x93, 0x35, 0x6c, 0xf6,
++      0xa8, 0xaf, 0x52, 0xaf, 0x34, 0xe5, 0xa1, 0x33, 0x88, 0xcb, 0x23, 0x4f,
++      0x20, 0xe6, 0x40, 0x5e, 0x67, 0x0a, 0xa8, 0xe2, 0xa9, 0x23, 0x3f, 0xf8,
++      0x83, 0x19, 0xcb, 0xcd, 0xff, 0x75, 0x3c, 0x13, 0x97, 0xc7, 0xd0, 0x99,
++      0x76, 0xed, 0x67, 0xf2, 0xda, 0xdf, 0xf4, 0x9b, 0x53, 0xaa, 0x0d, 0x39,
++      0x06, 0x12, 0x4f, 0x64, 0x38, 0xe6, 0xa0, 0x48, 0x1f, 0xf3, 0x4e, 0xf8,
++      0xe1, 0xbe, 0x35, 0x78, 0xb7, 0x33, 0x84, 0x57, 0x12, 0x3e, 0x13, 0x92,
++      0xa6, 0x33, 0x7c, 0x0b, 0x91, 0x3d, 0xa8, 0xc3, 0x88, 0xb3, 0x2f, 0x8c,
++      0x7e, 0x02, 0x7f, 0xfb, 0x90, 0x5f, 0x99, 0xc8, 0x8d, 0x77, 0x80, 0x07,
++      0x2c, 0xf7, 0xec, 0x04, 0xdf, 0xd5, 0x2d, 0x6d, 0x11, 0xec, 0x21, 0x3c,
++      0xf2, 0x43, 0x6b, 0x0f, 0xe8, 0x71, 0xcf, 0x27, 0x8e, 0xf0, 0x19, 0x91,
++      0xfe, 0x05, 0xe9, 0x51, 0x7a, 0x4f, 0x58, 0x66, 0x52, 0x5c, 0x6b, 0x07,
++      0x3c, 0xf7, 0x61, 0x4d, 0xef, 0x73, 0xdf, 0x94, 0xf2, 0xb7, 0xe9, 0xc6,
++      0x9c, 0x81, 0x6f, 0xe4, 0x53, 0x29, 0x53, 0xfa, 0xab, 0x2e, 0x6c, 0xdf,
++      0xda, 0x53, 0xdd, 0x7c, 0x97, 0x52, 0x96, 0x4b, 0x9b, 0x42, 0xee, 0x9b,
++      0x87, 0x54, 0xc3, 0x83, 0x7c, 0x9b, 0x21, 0x0c, 0xeb, 0xd9, 0x2e, 0x0d,
++      0x63, 0x0e, 0x52, 0x7e, 0xee, 0x9c, 0x52, 0xff, 0xd7, 0x9b, 0x4b, 0x63,
++      0x4e, 0xa1, 0x6d, 0x05, 0xfb, 0xbf, 0xa9, 0x6d, 0x45, 0x54, 0xdc, 0xb3,
++      0x15, 0x8c, 0x97, 0x39, 0xf6, 0x63, 0xf1, 0xf1, 0x7b, 0x5c, 0x7f, 0xef,
++      0xc8, 0xac, 0xcd, 0xf7, 0x0b, 0x47, 0xae, 0xda, 0x05, 0xe3, 0xc0, 0x1d,
++      0x79, 0x66, 0x52, 0xc7, 0xe7, 0x19, 0xc8, 0x7e, 0xb3, 0xa6, 0x6b, 0x35,
++      0xb9, 0x56, 0x8b, 0xc8, 0x3b, 0x2b, 0x6d, 0xb2, 0xb9, 0xe4, 0xea, 0xfc,
++      0xe6, 0x12, 0xf5, 0xdc, 0x94, 0x9f, 0xad, 0x58, 0x58, 0x4b, 0xe2, 0xaf,
++      0x47, 0x6e, 0xac, 0xdc, 0x99, 0x77, 0x5e, 0xae, 0x3f, 0x0a, 0x5a, 0x7a,
++      0x24, 0x64, 0x39, 0xba, 0xee, 0xca, 0x21, 0xf6, 0x15, 0x64, 0x42, 0xf2,
++      0xe5, 0x7e, 0xd4, 0x7e, 0x08, 0xce, 0x61, 0xc6, 0x20, 0xdc, 0x7f, 0xf9,
++      0xf3, 0xc8, 0x4d, 0x12, 0x30, 0x9e, 0x7e, 0xfd, 0xa6, 0xf8, 0xc5, 0x70,
++      0x8f, 0x34, 0x5b, 0xdf, 0xec, 0x76, 0x63, 0x95, 0xe9, 0xd6, 0xa7, 0x96,
++      0x1f, 0xaf, 0xdf, 0x04, 0xee, 0x11, 0xe8, 0x29, 0x75, 0xd3, 0x86, 0xce,
++      0x9a, 0xb2, 0x3a, 0x94, 0xa8, 0x14, 0x84, 0xfe, 0x21, 0xc5, 0x7c, 0x11,
++      0xfb, 0x92, 0x90, 0x47, 0xab, 0xce, 0x85, 0x32, 0x0a, 0x77, 0xbb, 0x30,
++      0x27, 0xf9, 0xfa, 0xef, 0x63, 0x3e, 0x23, 0xd3, 0xf5, 0x71, 0x9c, 0x75,
++      0x1a, 0x7a, 0xfb, 0x60, 0x8f, 0xb4, 0xf1, 0x9c, 0x14, 0x68, 0x7c, 0x44,
++      0x66, 0xce, 0xce, 0xc9, 0x91, 0x32, 0xe9, 0xe4, 0x1b, 0x63, 0x22, 0x99,
++      0x93, 0xe1, 0xf8, 0x0a, 0x72, 0x27, 0xd7, 0x1e, 0xd3, 0x32, 0x73, 0x0e,
++      0x38, 0xca, 0xac, 0xff, 0xfb, 0xa1, 0x37, 0xc3, 0xba, 0x7e, 0x99, 0xd6,
++      0x7e, 0x87, 0xf3, 0x6f, 0xe3, 0x9e, 0xfa, 0x0b, 0xfb, 0x00, 0x97, 0x47,
++      0xad, 0x33, 0x85, 0x7c, 0x79, 0xb9, 0x8c, 0x3a, 0xcf, 0x0e, 0x31, 0xf7,
++      0x52, 0xea, 0xa1, 0x5e, 0xa9, 0x96, 0x87, 0x4d, 0xa5, 0x98, 0x53, 0xf1,
++      0x2e, 0xb8, 0x46, 0xfb, 0x8e, 0xa9, 0xb0, 0xd5, 0x2b, 0x2b, 0xe5, 0x02,
++      0xea, 0x65, 0xe5, 0xbd, 0x67, 0x14, 0xc4, 0xb4, 0x5c, 0xbf, 0xa7, 0x6b,
++      0x1b, 0xe6, 0x9f, 0xf5, 0x2f, 0x80, 0xc6, 0x0c, 0x2e, 0xf3, 0x24, 0xe8,
++      0xc3, 0xf7, 0x32, 0x74, 0x7c, 0x81, 0x39, 0x5c, 0x06, 0x6b, 0x69, 0x39,
++      0x76, 0x61, 0x0a, 0x34, 0x74, 0x4a, 0xff, 0x9f, 0xd1, 0xc6, 0x9e, 0xc4,
++      0x1c, 0xc7, 0x09, 0xe8, 0xeb, 0xd7, 0xf1, 0x4d, 0xd8, 0x18, 0x7a, 0xca,
++      0xa1, 0x17, 0xbd, 0x09, 0x5a, 0x58, 0x07, 0x43, 0xfe, 0x87, 0xe3, 0x52,
++      0x3d, 0xfb, 0xb0, 0x4c, 0x2f, 0x3f, 0x0c, 0xfc, 0xff, 0x8a, 0xba, 0x00,
++      0xf1, 0x6d, 0x99, 0x67, 0x31, 0xff, 0xe3, 0x39, 0x10, 0x10, 0x6d, 0x63,
++      0x81, 0xf3, 0xec, 0x0f, 0x62, 0x3f, 0x6a, 0x8c, 0x72, 0x46, 0x66, 0xca,
++      0x3c, 0x0b, 0x77, 0x87, 0x7c, 0x2a, 0x7f, 0x76, 0xca, 0xbb, 0xe3, 0x1e,
++      0xc9, 0x45, 0x0b, 0xac, 0x2f, 0x10, 0x27, 0x96, 0x46, 0xb3, 0xa5, 0x84,
++      0x99, 0x55, 0xc4, 0x95, 0x14, 0xc6, 0x06, 0x77, 0x2e, 0x22, 0xd6, 0x02,
++      0x6a, 0xda, 0x34, 0xd7, 0x4e, 0x7a, 0x6f, 0x06, 0xc4, 0xf5, 0x63, 0x99,
++      0x80, 0x8e, 0xf5, 0x2f, 0x8c, 0x20, 0x17, 0xfe, 0x29, 0x72, 0xc9, 0xb8,
++      0x27, 0x83, 0x71, 0x4f, 0x37, 0xda, 0x1a, 0x74, 0x02, 0xf7, 0x5c, 0xc6,
++      0xdd, 0x97, 0xa1, 0x07, 0xf0, 0xd5, 0xaf, 0x6e, 0xe9, 0xc7, 0x78, 0x43,
++      0x8e, 0xd9, 0x21, 0xff, 0x50, 0x49, 0x24, 0xd7, 0xa1, 0x3f, 0x37, 0x50,
++      0x0b, 0xac, 0xa3, 0x3e, 0xdc, 0xb4, 0x23, 0xa8, 0x4b, 0x0e, 0x83, 0x7e,
++      0xe6, 0x94, 0x1c, 0xc7, 0x74, 0xae, 0xd3, 0x62, 0x3d, 0x7f, 0x8f, 0x7e,
++      0xd7, 0x95, 0xaf, 0xf6, 0xb0, 0xa6, 0x64, 0x3d, 0xce, 0x37, 0xe9, 0x77,
++      0x70, 0x8f, 0xeb, 0x26, 0xd7, 0xfd, 0x7d, 0xac, 0x05, 0x7c, 0xfd, 0x21,
++      0x2d, 0xd4, 0x1f, 0xee, 0x21, 0x4c, 0x8f, 0xb6, 0x93, 0xbc, 0xc6, 0x47,
++      0x9d, 0xfd, 0x9b, 0x6e, 0xd7, 0xce, 0x74, 0x9e, 0x65, 0x5e, 0x13, 0x5f,
++      0x7f, 0x3f, 0x74, 0x58, 0xd7, 0x65, 0x87, 0xe0, 0xbb, 0xeb, 0x8e, 0xbc,
++      0x60, 0xdf, 0x69, 0x77, 0xfb, 0xcb, 0xbe, 0x9c, 0x28, 0xc7, 0xc3, 0x72,
++      0xaa, 0x9e, 0x80, 0x4d, 0x50, 0x86, 0x56, 0x83, 0x0c, 0x45, 0xfe, 0xaa,
++      0x2c, 0xf2, 0x4a, 0x99, 0x6b, 0x5a, 0x86, 0xb1, 0x6c, 0xa8, 0x8d, 0xef,
++      0xea, 0xd0, 0xcb, 0xb7, 0xe5, 0xc8, 0xa2, 0xc8, 0x05, 0xac, 0xaf, 0x96,
++      0x69, 0xab, 0x23, 0xc8, 0x5f, 0x77, 0x49, 0x75, 0x09, 0x35, 0x59, 0x59,
++      0xa6, 0xb3, 0x9f, 0x63, 0xbc, 0x89, 0xc8, 0xa6, 0x7e, 0x8f, 0x15, 0x19,
++      0xbc, 0x18, 0x96, 0xf0, 0x45, 0x14, 0x7f, 0x90, 0xfd, 0xa5, 0x21, 0xff,
++      0x7d, 0xd6, 0xb5, 0xf9, 0x62, 0x09, 0x7b, 0xcb, 0xfd, 0xda, 0x4f, 0x16,
++      0x6b, 0x33, 0x92, 0xaf, 0xf0, 0x2c, 0xf4, 0x4b, 0x71, 0xac, 0xa5, 0x64,
++      0xf6, 0xec, 0x88, 0x3c, 0x8b, 0x33, 0x50, 0xff, 0xe1, 0x8c, 0x09, 0x29,
++      0x5c, 0xc0, 0x7c, 0xed, 0xba, 0x2c, 0xad, 0xcc, 0x48, 0xb5, 0x72, 0xb9,
++      0xe1, 0xdd, 0x1d, 0xe3, 0xa5, 0xc6, 0x5a, 0xf6, 0x30, 0xeb, 0x19, 0xd4,
++      0xaa, 0x16, 0xc6, 0x90, 0x59, 0x6d, 0x76, 0xfa, 0xce, 0xf7, 0xe2, 0xc6,
++      0x1a, 0x76, 0x52, 0xe6, 0xcb, 0x29, 0x29, 0x9e, 0x1d, 0xd1, 0x6f, 0x0a,
++      0x2d, 0xe9, 0xca, 0xd3, 0x37, 0x11, 0x2b, 0x26, 0xf5, 0x7b, 0xf1, 0x2d,
++      0x79, 0xcc, 0x9e, 0x97, 0xa3, 0xd6, 0x41, 0x39, 0x85, 0xfc, 0xfa, 0x4b,
++      0x76, 0xab, 0xc4, 0xbb, 0x79, 0x8f, 0xa0, 0xd7, 0x62, 0x0d, 0xea, 0xc8,
++      0x84, 0xfd, 0xa0, 0xf9, 0x3c, 0x24, 0xfb, 0x4e, 0x8d, 0x71, 0xf2, 0xbf,
++      0x9d, 0x0c, 0xe2, 0xde, 0x4d, 0xd4, 0x8e, 0x19, 0x0d, 0x67, 0xb8, 0x70,
++      0x15, 0xc2, 0x0d, 0x9b, 0x2f, 0x10, 0x6e, 0xc9, 0xf0, 0xe0, 0x0c, 0xc0,
++      0x85, 0x64, 0xc3, 0x0e, 0x43, 0x47, 0x26, 0xc1, 0x27, 0x7c, 0xfc, 0x68,
++      0x87, 0x97, 0x07, 0xb7, 0x22, 0xb6, 0xde, 0xde, 0xff, 0x86, 0xb7, 0xff,
++      0x59, 0x6f, 0xff, 0xd5, 0xad, 0xfd, 0x7e, 0x7c, 0xfd, 0x85, 0x23, 0x0d,
++      0x74, 0xbd, 0x51, 0x72, 0xe1, 0xe7, 0x3d, 0xba, 0xae, 0x6e, 0xd1, 0xe5,
++      0xc3, 0x43, 0x9e, 0x9a, 0x67, 0xfa, 0x66, 0xfa, 0xe8, 0x7e, 0xc8, 0xd1,
++      0x91, 0x9c, 0x0d, 0xdb, 0x28, 0x27, 0xc6, 0x0b, 0xfa, 0x2d, 0x4d, 0xc9,
++      0x7a, 0x74, 0x5e, 0x26, 0xad, 0xc4, 0xf8, 0xac, 0x84, 0xa0, 0xcb, 0xf4,
++      0x2d, 0x21, 0xa9, 0xd2, 0xe7, 0xa0, 0xcf, 0xdb, 0x3b, 0xd3, 0xfa, 0x4e,
++      0x03, 0xad, 0xa1, 0x97, 0x49, 0xa3, 0x4b, 0x6b, 0x64, 0xe0, 0x36, 0xad,
++      0x2e, 0xbc, 0x4b, 0xeb, 0x3b, 0xa5, 0x06, 0xf8, 0x8b, 0x61, 0x0f, 0x3e,
++      0xdc, 0x00, 0x4f, 0x7d, 0x66, 0x5e, 0x41, 0x7d, 0x26, 0x6d, 0x9f, 0x85,
++      0x6d, 0x48, 0xa4, 0x35, 0x5d, 0x39, 0xfe, 0xc0, 0x80, 0x23, 0x11, 0xe4,
++      0x1b, 0xcd, 0x58, 0xdb, 0xac, 0x30, 0x17, 0x51, 0x7d, 0xcd, 0x32, 0x08,
++      0x9d, 0xe5, 0xdd, 0xb9, 0x6f, 0x82, 0x8f, 0xe9, 0x9c, 0xc0, 0x91, 0xa3,
++      0x36, 0x69, 0x79, 0xdf, 0x79, 0x25, 0x3a, 0x68, 0x17, 0x65, 0xc8, 0x6c,
++      0xc6, 0xf9, 0xd5, 0xba, 0xc6, 0x99, 0x24, 0x2d, 0xe7, 0x87, 0xfa, 0xcd,
++      0xbf, 0x07, 0x9f, 0x13, 0x15, 0x43, 0xaa, 0x56, 0x22, 0x76, 0x09, 0x38,
++      0xf6, 0xe1, 0x6e, 0xaa, 0x23, 0xa4, 0x47, 0xe4, 0x08, 0xf4, 0xbb, 0xaa,
++      0xe3, 0x22, 0xf5, 0x38, 0x31, 0x59, 0x40, 0xae, 0xf3, 0xd7, 0x3a, 0xb6,
++      0x39, 0xce, 0x4d, 0xc4, 0xb7, 0xc9, 0x6d, 0xba, 0xa7, 0x2e, 0xba, 0xba,
++      0xa7, 0x2e, 0xa2, 0x06, 0x3e, 0x1d, 0x91, 0x96, 0x55, 0xd8, 0xcf, 0xcb,
++      0x7b, 0xdc, 0x7c, 0xee, 0x65, 0xfe, 0xe6, 0x04, 0x7f, 0x77, 0x3a, 0x2c,
++      0xd6, 0x69, 0x1d, 0x0f, 0x20, 0xef, 0x09, 0x99, 0x3d, 0x47, 0x9f, 0x6a,
++      0xc9, 0xc0, 0x69, 0xde, 0x07, 0xf3, 0x9a, 0xa5, 0xd1, 0x19, 0xd8, 0xc8,
++      0x1c, 0xfc, 0x82, 0x5a, 0x7d, 0x57, 0x66, 0x2c, 0xca, 0xa1, 0x53, 0xda,
++      0x56, 0x51, 0x8f, 0xaf, 0xc2, 0x37, 0xac, 0xc6, 0xa4, 0x09, 0xb6, 0xa5,
++      0x2e, 0x46, 0x8d, 0xe2, 0xe2, 0x07, 0xb0, 0x07, 0xfe, 0x7e, 0x83, 0xdc,
++      0xf2, 0x62, 0xcc, 0xa0, 0x6d, 0xa9, 0x8b, 0xd4, 0x73, 0xa4, 0x53, 0x17,
++      0xa9, 0xe7, 0xa4, 0xc3, 0xb7, 0x17, 0x7c, 0x5f, 0x1c, 0xd1, 0xef, 0xd3,
++      0x37, 0x6d, 0xf2, 0xf2, 0x8f, 0x92, 0xad, 0x30, 0x47, 0x24, 0x3f, 0xd2,
++      0x8d, 0x5c, 0xa6, 0x2b, 0x6b, 0x0f, 0x8c, 0x6f, 0xca, 0xa7, 0xe5, 0xeb,
++      0xee, 0x4f, 0xc1, 0x17, 0xf9, 0x68, 0xe4, 0x8b, 0x3c, 0x75, 0x4a, 0x93,
++      0xe6, 0xcb, 0xe7, 0x07, 0x82, 0x06, 0x3f, 0x7d, 0xa7, 0x63, 0xc0, 0xff,
++      0x75, 0xf8, 0x80, 0x5e, 0xf4, 0x4f, 0xa2, 0x47, 0x48, 0xbb, 0x48, 0xde,
++      0xc9, 0xeb, 0x0d, 0xe4, 0x8d, 0x3e, 0x9f, 0xd3, 0xf8, 0x7e, 0x5d, 0x66,
++      0x17, 0x9d, 0x93, 0x88, 0xab, 0x7c, 0x3b, 0xef, 0x71, 0xdf, 0x81, 0xb7,
++      0xf3, 0xfe, 0xba, 0xb8, 0xf2, 0x49, 0x98, 0x55, 0xc1, 0xf7, 0xca, 0x76,
++      0x59, 0x34, 0xfa, 0x8e, 0x98, 0xce, 0xc3, 0x8f, 0xd4, 0xe8, 0x27, 0x28,
++      0xa3, 0x1b, 0x92, 0x5d, 0xe4, 0xfb, 0x97, 0x8b, 0x6f, 0xba, 0xe6, 0xfb,
++      0x8d, 0xc6, 0x3d, 0x36, 0xe0, 0x7a, 0x01, 0x47, 0xba, 0xd6, 0x29, 0x3f,
++      0xf8, 0x9c, 0xbd, 0x0d, 0xbe, 0xa6, 0x71, 0xdf, 0xb8, 0x3c, 0x87, 0x3c,
++      0xe0, 0x0d, 0xfb, 0x0e, 0xb9, 0x4e, 0x33, 0x17, 0xaa, 0xd6, 0xa6, 0x60,
++      0x93, 0x4d, 0xf0, 0x65, 0xa6, 0x6c, 0x96, 0x9a, 0xa5, 0x8a, 0x7c, 0x67,
++      0x79, 0x85, 0xbe, 0x90, 0xb4, 0xb7, 0x61, 0xde, 0xf5, 0x5f, 0xf4, 0xb5,
++      0x9b, 0x25, 0xc4, 0x59, 0xd8, 0xf6, 0x66, 0x29, 0x8a, 0xbe, 0x17, 0xbd,
++      0x85, 0x3e, 0x8e, 0x3e, 0x89, 0x7e, 0x04, 0xfd, 0x08, 0x7a, 0x0b, 0x7b,
++      0x63, 0xe8, 0xfd, 0x9a, 0x81, 0xb8, 0x6e, 0xf3, 0x5d, 0xd4, 0xe7, 0x21,
++      0x57, 0xb4, 0x18, 0xd3, 0xc2, 0x76, 0x0e, 0x75, 0x44, 0x76, 0x84, 0xb9,
++      0x1e, 0x73, 0xbe, 0x8f, 0x1d, 0xd3, 0x62, 0x5d, 0x5e, 0x30, 0xf6, 0x0d,
++      0x31, 0x2e, 0x54, 0x10, 0x17, 0x3e, 0xd8, 0x8d, 0xfa, 0xd1, 0xdc, 0xaf,
++      0xdf, 0x8e, 0x16, 0x31, 0xe6, 0x37, 0x6a, 0xde, 0xe8, 0x1c, 0xe2, 0x14,
++      0xfd, 0xa7, 0x83, 0x3d, 0x79, 0xf8, 0xf1, 0x2e, 0xd8, 0x5f, 0x06, 0x7e,
++      0x1b, 0xdf, 0x4b, 0x6f, 0xec, 0x76, 0x63, 0x2a, 0xf2, 0x77, 0xb5, 0xfd,
++      0xbd, 0xc6, 0xc6, 0x9e, 0x9d, 0x6a, 0x83, 0x0e, 0xe0, 0x48, 0x54, 0x96,
++      0x60, 0x83, 0x3f, 0xb4, 0x4f, 0xea, 0xdc, 0x8e, 0x77, 0xf1, 0x2c, 0x72,
++      0xd4, 0xdc, 0x02, 0x73, 0x98, 0x13, 0xa8, 0x4b, 0x50, 0x9f, 0x45, 0x59,
++      0x93, 0x33, 0x16, 0xe8, 0x5c, 0x34, 0x2a, 0x6d, 0x8c, 0x03, 0x37, 0x70,
++      0x1e, 0xf8, 0x5a, 0x76, 0x20, 0xb3, 0x03, 0xc8, 0x09, 0x1d, 0x27, 0x6c,
++      0xed, 0x93, 0xf8, 0x21, 0xfa, 0x1c, 0xc1, 0x7e, 0x53, 0xdc, 0xf7, 0x74,
++      0xf8, 0xdd, 0x29, 0xfd, 0x5b, 0x31, 0x94, 0xeb, 0xb3, 0xd8, 0x7b, 0x17,
++      0x70, 0x71, 0x9e, 0x6f, 0xd9, 0x22, 0xfb, 0x16, 0xdc, 0x9c, 0x56, 0x59,
++      0x8d, 0xf8, 0x7e, 0xd5, 0xc3, 0xc7, 0x75, 0xe5, 0xfd, 0xa6, 0xb1, 0xc7,
++      0x7d, 0x1b, 0xc6, 0x1d, 0x9f, 0x42, 0xfe, 0xbc, 0x81, 0x7b, 0x79, 0x03,
++      0x77, 0x72, 0xa5, 0x44, 0x5d, 0x1f, 0x86, 0xde, 0x43, 0x86, 0x53, 0xc4,
++      0x35, 0xa2, 0xcf, 0xde, 0x28, 0xc1, 0x77, 0xd2, 0xff, 0x29, 0x64, 0x77,
++      0x6d, 0x6e, 0x4c, 0x77, 0xf1, 0xf4, 0xba, 0x70, 0xe2, 0xaf, 0xed, 0xd6,
++      0xf4, 0x54, 0xf5, 0x3b, 0x18, 0xe5, 0x04, 0x1d, 0xe4, 0x6f, 0x03, 0x1a,
++      0xe6, 0x6b, 0x51, 0xfd, 0xfe, 0xae, 0x38, 0x47, 0x3e, 0x46, 0x24, 0xbb,
++      0xe0, 0xef, 0xeb, 0xc6, 0xbe, 0xd6, 0x06, 0x5c, 0x77, 0x6f, 0xe3, 0x41,
++      0x79, 0x3c, 0x70, 0xfd, 0x93, 0x6f, 0xc3, 0x85, 0xad, 0xb7, 0x61, 0xc6,
++      0x5f, 0xde, 0x4d, 0x0a, 0xfb, 0xfd, 0xfb, 0xe9, 0xf5, 0x6a, 0x81, 0xc4,
++      0x7c, 0x41, 0x98, 0xab, 0xf0, 0x8e, 0xc6, 0x61, 0xd7, 0x5d, 0xc0, 0x6f,
++      0x4b, 0xa5, 0xd4, 0x22, 0xaa, 0x87, 0xb5, 0x31, 0x73, 0xe5, 0xc6, 0x33,
++      0x7f, 0xdb, 0x3b, 0x13, 0xf5, 0xf4, 0x19, 0xe6, 0xcd, 0x3a, 0xce, 0x00,
++      0xa6, 0x7d, 0x1b, 0x6d, 0xbf, 0xee, 0xc1, 0x71, 0x3d, 0x29, 0x05, 0xe4,
++      0xa1, 0xb9, 0x05, 0x64, 0xf4, 0xf0, 0xdf, 0x2a, 0xcd, 0xdf, 0xb3, 0xf8,
++      0x86, 0x37, 0x1c, 0x9f, 0x05, 0x8d, 0x05, 0x33, 0xc3, 0x77, 0x33, 0xe0,
++      0xd8, 0xbb, 0x0d, 0xc7, 0x84, 0x87, 0x63, 0x42, 0x8a, 0xe7, 0x26, 0x61,
++      0x6b, 0x19, 0xc4, 0xf7, 0x7e, 0xf3, 0x80, 0x7c, 0x1e, 0xc5, 0x35, 0xe6,
++      0x2e, 0x8c, 0xe0, 0x9e, 0x1c, 0x67, 0x9f, 0x7d, 0x18, 0x74, 0xbf, 0x86,
++      0xd8, 0xea, 0xe7, 0x3c, 0xc5, 0x58, 0x08, 0x31, 0xec, 0x98, 0xfe, 0x0d,
++      0xb6, 0x60, 0x9a, 0xd0, 0x57, 0x65, 0x0c, 0x27, 0x51, 0xde, 0x23, 0xbe,
++      0xcd, 0x23, 0x56, 0x91, 0xcf, 0x0e, 0x29, 0x9a, 0xc6, 0xa3, 0x21, 0xe4,
++      0x35, 0xd9, 0x05, 0xda, 0x91, 0x0c, 0x84, 0xd2, 0xcd, 0xc8, 0x49, 0x1d,
++      0xf9, 0x99, 0xcd, 0x7f, 0xa3, 0x30, 0x2f, 0x1b, 0x35, 0x13, 0xfd, 0x3a,
++      0xee, 0xe1, 0xdb, 0xf8, 0xbe, 0xde, 0x83, 0xbc, 0x0f, 0x2b, 0x19, 0xe8,
++      0x6e, 0x52, 0xe7, 0x33, 0xcc, 0x23, 0xaa, 0x88, 0xb7, 0x0a, 0xb1, 0x06,
++      0x79, 0xd5, 0x38, 0x73, 0xd7, 0xe7, 0x96, 0xaf, 0xcb, 0x95, 0x45, 0xfe,
++      0x06, 0xca, 0xb8, 0x7c, 0x90, 0xfe, 0xc0, 0x9c, 0x4b, 0x61, 0x6e, 0x85,
++      0xbe, 0x0c, 0xe3, 0x3a, 0x0c, 0xa8, 0x07, 0x39, 0x02, 0x72, 0xed, 0x4d,
++      0x2b, 0x09, 0x3e, 0xaf, 0xcb, 0xc6, 0x62, 0x58, 0x96, 0x2d, 0xe6, 0x45,
++      0x12, 0xcf, 0x02, 0x76, 0x63, 0xe5, 0x9a, 0xab, 0x13, 0x84, 0x47, 0xcd,
++      0x53, 0x40, 0x5e, 0x77, 0x40, 0xef, 0xfd, 0x65, 0xf7, 0x4c, 0x9a, 0x1a,
++      0xeb, 0xbc, 0x19, 0xd9, 0xa0, 0x3d, 0xd9, 0x7c, 0x93, 0x62, 0x6e, 0x70,
++      0x02, 0x3a, 0xcb, 0xdc, 0x9d, 0xf5, 0x00, 0xbe, 0x6b, 0x5c, 0x27, 0xef,
++      0xe8, 0x97, 0xfa, 0x21, 0x1b, 0xda, 0x3d, 0xdf, 0xc4, 0x10, 0x47, 0x15,
++      0x6d, 0xbd, 0xa8, 0x7d, 0x41, 0xb1, 0x3c, 0x83, 0x98, 0x02, 0x1f, 0xc0,
++      0xdf, 0x70, 0xa6, 0xa6, 0x70, 0x97, 0xe3, 0x80, 0xdb, 0x16, 0x4b, 0xd6,
++      0x8a, 0x3a, 0x2f, 0x53, 0xe7, 0x6f, 0xbf, 0xdf, 0xe4, 0x61, 0x3f, 0x6a,
++      0x0d, 0xba, 0x05, 0x1b, 0x52, 0x6b, 0x51, 0xf4, 0xf0, 0xc7, 0x6b, 0xa8,
++      0x2f, 0x4a, 0x7c, 0x1f, 0x42, 0x6d, 0x50, 0xe2, 0xdb, 0x49, 0x12, 0xfd,
++      0x08, 0xdf, 0x8b, 0x3c, 0xbf, 0x46, 0xfc, 0xa4, 0xc3, 0xf7, 0x2f, 0xcc,
++      0x25, 0xe9, 0x5f, 0xfc, 0x7c, 0xd2, 0xd5, 0x85, 0x53, 0x65, 0xfa, 0x10,
++      0xea, 0x75, 0x3f, 0xfc, 0x16, 0x75, 0xc1, 0xcd, 0x25, 0x57, 0x2a, 0xae,
++      0xcc, 0x66, 0xeb, 0x97, 0x75, 0x8c, 0xd8, 0x2f, 0x16, 0x74, 0x8c, 0xb2,
++      0xc3, 0x9a, 0x8e, 0x01, 0x97, 0x24, 0xa3, 0x7b, 0xca, 0xec, 0x75, 0xc9,
++      0xac, 0x8c, 0xc8, 0x0b, 0xda, 0x6f, 0xf9, 0x3e, 0x8b, 0x39, 0x64, 0x0c,
++      0xf2, 0x4b, 0xca, 0xf3, 0x67, 0xaf, 0x4b, 0xf6, 0x45, 0xfa, 0xad, 0xe1,
++      0x58, 0xab, 0x41, 0x5f, 0xe5, 0x48, 0x0d, 0xb1, 0xe9, 0x80, 0xcd, 0x7f,
++      0x07, 0x10, 0x42, 0x4d, 0xe7, 0x48, 0xf3, 0x68, 0xc2, 0x8e, 0x1b, 0xfd,
++      0x4f, 0xb6, 0x1a, 0x8c, 0x8d, 0xc3, 0xe6, 0x53, 0xe2, 0xbf, 0x47, 0xb5,
++      0xc8, 0x53, 0xfa, 0xad, 0x02, 0x66, 0xbb, 0xf0, 0x91, 0xfe, 0x1d, 0xe5,
++      0x66, 0x8a, 0xb2, 0xc6, 0x78, 0x8d, 0xf3, 0x85, 0xc8, 0xcd, 0x54, 0x93,
++      0x14, 0xef, 0x72, 0x9c, 0xa3, 0xa3, 0xa9, 0xdd, 0xee, 0xbf, 0x15, 0xf9,
++      0xc6, 0x5d, 0xae, 0x2f, 0x38, 0xea, 0x8d, 0x5f, 0x41, 0x4f, 0xdd, 0x66,
++      0xbc, 0x65, 0x7c, 0xe4, 0xbd, 0xa1, 0x5f, 0xe1, 0x37, 0x63, 0xef, 0x3c,
++      0x62, 0x2f, 0xe3, 0x65, 0x97, 0xe4, 0x0e, 0x6b, 0x9f, 0xc1, 0xf9, 0x82,
++      0x9b, 0x4b, 0x7b, 0x70, 0x95, 0x69, 0x99, 0xad, 0x30, 0x87, 0xda, 0x40,
++      0x2c, 0x1b, 0x82, 0xae, 0x32, 0xa6, 0x9d, 0x44, 0x3c, 0xe7, 0xef, 0xd2,
++      0x58, 0x5b, 0xe2, 0xbe, 0x44, 0x32, 0xae, 0xc0, 0xf3, 0x96, 0x4e, 0xdd,
++      0x8c, 0xf2, 0x3d, 0xea, 0xd2, 0x10, 0xee, 0xfd, 0x4f, 0x59, 0x5b, 0x0c,
++      0x68, 0x1d, 0xc9, 0xbe, 0x4c, 0xd9, 0xbb, 0xbf, 0x5b, 0x4b, 0xb7, 0x6b,
++      0x03, 0xcc, 0x03, 0x1e, 0x87, 0x5c, 0xf6, 0xdb, 0xd7, 0x19, 0xbb, 0xff,
++      0x5d, 0x59, 0xc3, 0xc9, 0xa7, 0x0c, 0xda, 0x36, 0xc6, 0x2b, 0x21, 0x59,
++      0x8a, 0x92, 0x7f, 0xc8, 0xcb, 0xa0, 0xed, 0xec, 0x24, 0x87, 0xed, 0x32,
++      0xf8, 0x4b, 0xc8, 0x80, 0xb2, 0xf4, 0x65, 0xc0, 0xef, 0x49, 0xdc, 0x17,
++      0x6b, 0x86, 0x7e, 0x5d, 0x47, 0x16, 0xeb, 0xee, 0xd9, 0xc5, 0x72, 0x23,
++      0xcd, 0xa4, 0x97, 0x77, 0x7a, 0x49, 0x72, 0xfa, 0x7e, 0xe7, 0x25, 0x57,
++      0xb9, 0x24, 0xfb, 0x2a, 0xf3, 0xf2, 0x98, 0xf5, 0x28, 0xf8, 0xbd, 0xe6,
++      0xcc, 0x58, 0xba, 0x56, 0x19, 0xcf, 0xff, 0x6f, 0xe7, 0x56, 0x1b, 0xdb,
++      0x56, 0x75, 0x86, 0x5f, 0x5f, 0xdb, 0x69, 0x1a, 0x9a, 0x70, 0xeb, 0x3a,
++      0x89, 0x9b, 0x66, 0xad, 0x1d, 0xdf, 0x7e, 0x88, 0xa4, 0xe8, 0x36, 0x64,
++      0x34, 0xea, 0x82, 0x62, 0x9c, 0x50, 0xc2, 0xe8, 0x44, 0xda, 0x75, 0x55,
++      0xb5, 0x31, 0x64, 0x39, 0xe9, 0x07, 0xd3, 0x06, 0xa3, 0xb0, 0x82, 0x18,
++      0x52, 0x8d, 0xdb, 0x6a, 0x9d, 0x96, 0xc6, 0xe9, 0x07, 0x6b, 0x37, 0x69,
++      0x9a, 0xe5, 0xa4, 0x2d, 0x48, 0x11, 0x2e, 0x88, 0x6e, 0xfb, 0xb1, 0x8d,
++      0x2a, 0x65, 0xec, 0xff, 0xf6, 0x67, 0xda, 0xd0, 0x16, 0x15, 0x18, 0xfc,
++      0xd8, 0xa4, 0xfe, 0xe0, 0x47, 0x25, 0xe8, 0xbc, 0xe7, 0x79, 0xcf, 0xbd,
++      0x8e, 0x6d, 0x82, 0x26, 0x2d, 0x52, 0xe4, 0x7b, 0xce, 0x3d, 0xf7, 0x9c,
++      0x73, 0xcf, 0xfb, 0xfd, 0xbe, 0xcf, 0xc5, 0xda, 0x13, 0x7d, 0x6b, 0xe5,
++      0x63, 0xf8, 0x1d, 0x27, 0x67, 0x6d, 0xc9, 0xd8, 0x83, 0xf2, 0x63, 0xcd,
++      0xe5, 0x33, 0x3e, 0x09, 0xc0, 0x27, 0x35, 0xb8, 0x02, 0x69, 0x77, 0x62,
++      0x37, 0x85, 0x3e, 0x65, 0x18, 0xb4, 0x8e, 0x1b, 0xbf, 0xd9, 0x36, 0xf7,
++      0x37, 0x9d, 0x81, 0xef, 0xee, 0x0e, 0xb4, 0xfb, 0x39, 0x5f, 0xe3, 0xdf,
++      0xfe, 0xc5, 0xab, 0xa1, 0x0d, 0xca, 0x0c, 0xf6, 0xf3, 0x96, 0xea, 0x59,
++      0x07, 0xbc, 0xc4, 0xdc, 0x74, 0x4c, 0xf3, 0x0f, 0xe1, 0x69, 0xea, 0xa8,
++      0xab, 0xd0, 0x51, 0x43, 0xd4, 0x5d, 0xc3, 0xb3, 0x2e, 0xf3, 0x03, 0x51,
++      0xf9, 0xf3, 0x14, 0xf5, 0x70, 0x5c, 0xfe, 0x34, 0xf5, 0x02, 0xf6, 0x93,
++      0x28, 0x32, 0x47, 0x79, 0x63, 0x26, 0x47, 0x3f, 0x49, 0xfd, 0xf9, 0xb4,
++      0xfb, 0xac, 0xda, 0x81, 0xb8, 0x95, 0x5f, 0x13, 0x56, 0x7d, 0xf3, 0xb4,
++      0xd6, 0x74, 0xe3, 0x56, 0xb7, 0xdc, 0x38, 0x6f, 0x74, 0x6c, 0x78, 0x3a,
++      0x1a, 0x18, 0x99, 0xa3, 0x5d, 0x4a, 0xc6, 0xb2, 0xd6, 0x0a, 0x39, 0x10,
++      0x65, 0xee, 0x39, 0x45, 0xfd, 0x0c, 0x5b, 0xd8, 0x6b, 0x67, 0xad, 0x66,
++      0xcf, 0xfe, 0xc4, 0x1a, 0xf4, 0xec, 0xd3, 0x9e, 0x9e, 0xe5, 0xbd, 0x14,
++      0x68, 0x4a, 0x5b, 0x94, 0x98, 0x19, 0xb5, 0x92, 0xb0, 0x79, 0xb8, 0x9e,
++      0xe7, 0xfc, 0x71, 0x39, 0x32, 0x7f, 0x18, 0xfe, 0x77, 0xaf, 0xbd, 0x87,
++      0x76, 0xd5, 0x1e, 0x22, 0x16, 0x07, 0xeb, 0x7f, 0xa9, 0x61, 0xae, 0xc7,
++      0xbd, 0xb9, 0x78, 0x1f, 0x72, 0x3e, 0xed, 0xc8, 0x04, 0x6c, 0xc9, 0x88,
++      0x6d, 0xf6, 0x5a, 0x3f, 0x76, 0x77, 0x75, 0xdd, 0x13, 0x05, 0xc7, 0xc3,
++      0x85, 0xe1, 0x17, 0xbe, 0xd0, 0xd7, 0x23, 0x5c, 0x93, 0xeb, 0xb5, 0x49,
++      0x7a, 0x1f, 0xf4, 0xcb, 0x34, 0xff, 0x73, 0x5e, 0xed, 0x0a, 0xf1, 0x4a,
++      0xb4, 0x6b, 0x19, 0xdb, 0xf4, 0x80, 0x37, 0xdf, 0xb6, 0x0e, 0x69, 0x89,
++      0xd6, 0x8c, 0x67, 0x6e, 0x85, 0xed, 0xb8, 0xe4, 0xe6, 0xf9, 0x5b, 0xa9,
++      0x44, 0x9c, 0x26, 0xd9, 0x63, 0xaf, 0x6b, 0x98, 0x63, 0x2b, 0xfa, 0x8c,
++      0x4f, 0x10, 0x9c, 0x0e, 0x78, 0xbe, 0xc5, 0x06, 0xfa, 0x4d, 0xde, 0x75,
++      0xb3, 0xe6, 0x64, 0xe2, 0x56, 0x57, 0xc3, 0x7b, 0x6c, 0xa8, 0xda, 0xe1,
++      0xb8, 0x45, 0xdd, 0xd9, 0x14, 0x95, 0x36, 0xf2, 0x50, 0x45, 0xfd, 0xf8,
++      0x90, 0x63, 0xb0, 0x16, 0x51, 0xe7, 0x60, 0x07, 0x73, 0xf6, 0x6f, 0xeb,
++      0xb9, 0xb5, 0xd2, 0x27, 0xc0, 0x35, 0xf8, 0xe4, 0x73, 0xf9, 0x5e, 0xe6,
++      0x7a, 0x31, 0x7f, 0x0b, 0xe7, 0x77, 0xbd, 0x73, 0x4e, 0xb8, 0x39, 0xeb,
++      0x7e, 0xc9, 0x9e, 0x37, 0xfc, 0x97, 0x76, 0xc0, 0x7b, 0x6d, 0x68, 0xcf,
++      0xd1, 0x26, 0x7c, 0xd1, 0x3c, 0xbe, 0x6d, 0xd8, 0xa2, 0xb6, 0xe1, 0x78,
++      0x81, 0xfc, 0x49, 0xbe, 0xf4, 0xf9, 0xd1, 0xd7, 0x79, 0xe4, 0x51, 0xea,
++      0xd9, 0x41, 0x39, 0x53, 0xe0, 0xd9, 0xa4, 0xb4, 0xa6, 0xb5, 0xf1, 0xec,
++      0x84, 0xe2, 0xb1, 0x7a, 0xa6, 0x13, 0x17, 0x73, 0x32, 0x2c, 0x57, 0x5d,
++      0x9e, 0x59, 0xa2, 0x98, 0x09, 0xb6, 0xd6, 0xbc, 0xff, 0x3e, 0x3d, 0xb3,
++      0xb0, 0xfa, 0x8c, 0x31, 0x8c, 0x7d, 0xc9, 0xa3, 0x77, 0x9b, 0x9e, 0x6d,
++      0xa6, 0x8e, 0x3e, 0x8f, 0xea, 0x39, 0x85, 0xa1, 0x13, 0x59, 0xc7, 0x0f,
++      0x47, 0xf8, 0x0c, 0xd7, 0xa5, 0xcf, 0xc7, 0xb5, 0xc8, 0x7b, 0x3d, 0xb0,
++      0xd8, 0xfd, 0x12, 0xdc, 0x01, 0xd1, 0xdf, 0xc1, 0x3a, 0x72, 0x00, 0xb2,
++      0xba, 0xd1, 0x60, 0x5f, 0xc6, 0x8d, 0xaf, 0x91, 0xb1, 0xde, 0xc2, 0x39,
++      0x22, 0x56, 0x81, 0x1f, 0x7d, 0xfc, 0xa7, 0x77, 0x30, 0x5f, 0xc6, 0xf3,
++      0xd7, 0x07, 0x30, 0x3f, 0xcf, 0x82, 0x32, 0x36, 0xb5, 0x8d, 0xbc, 0x3a,
++      0xaa, 0xf5, 0x41, 0x3e, 0x43, 0x39, 0xe6, 0x99, 0x91, 0x2e, 0x7f, 0xc3,
++      0xf3, 0x6c, 0x6f, 0x6d, 0xa0, 0x63, 0xd2, 0xdb, 0x9f, 0x7f, 0x3f, 0x2c,
++      0xe1, 0x0e, 0xea, 0xb8, 0xa8, 0x24, 0xa7, 0x19, 0xb3, 0xc0, 0x76, 0x8d,
++      0x73, 0xae, 0xff, 0xad, 0x8b, 0x33, 0xff, 0xa7, 0x2e, 0xce, 0x58, 0x1f,
++      0x29, 0xef, 0x84, 0x35, 0x8f, 0xf5, 0xc5, 0x74, 0x2d, 0xd6, 0xd1, 0xd5,
++      0xaf, 0xdd, 0x47, 0xab, 0x74, 0xfc, 0x51, 0x81, 0xf6, 0x2a, 0xa5, 0x39,
++      0xe5, 0x7f, 0x4e, 0xf1, 0x6c, 0xb9, 0xc7, 0xab, 0xdc, 0xe3, 0xf0, 0x82,
++      0x62, 0x20, 0xbf, 0xa6, 0x32, 0x7c, 0xb2, 0x40, 0x1d, 0xd3, 0x2a, 0xb3,
++      0x33, 0xbe, 0x9e, 0x19, 0xf3, 0x7c, 0xdc, 0xfc, 0x9a, 0x26, 0xd5, 0x33,
++      0xf0, 0x6e, 0x9c, 0x11, 0xcf, 0xbe, 0x74, 0x4b, 0xe9, 0x3c, 0xed, 0x6e,
++      0x12, 0x7d, 0xd1, 0x40, 0x69, 0x8e, 0xb5, 0x49, 0x62, 0x50, 0x86, 0x85,
++      0x75, 0xff, 0x11, 0xfb, 0x38, 0xe4, 0x2d, 0x26, 0xef, 0x4f, 0xd1, 0xa7,
++      0x6f, 0x82, 0x6f, 0xdc, 0xd6, 0x70, 0xbe, 0xdb, 0xab, 0x3e, 0x61, 0x3d,
++      0xdd, 0x37, 0x74, 0x4a, 0x0b, 0xf9, 0xdc, 0xb1, 0x6f, 0x08, 0x7d, 0x30,
++      0x5e, 0x67, 0x11, 0x0b, 0x30, 0xf6, 0x88, 0x6b, 0xec, 0x51, 0x2a, 0xb2,
++      0xaf, 0xd5, 0xcb, 0x2b, 0xb5, 0x2a, 0xaf, 0x90, 0xdf, 0x32, 0xea, 0x7f,
++      0x0f, 0xa9, 0xce, 0xca, 0x4f, 0xf5, 0x1a, 0xfc, 0x8a, 0x1d, 0x53, 0xde,
++      0x93, 0x3a, 0xde, 0x8b, 0x79, 0x6b, 0x3f, 0xdc, 0x69, 0x7c, 0x2b, 0x5b,
++      0xf5, 0x4d, 0x58, 0xc7, 0xd1, 0xae, 0x70, 0x7e, 0xf2, 0x06, 0x79, 0x84,
++      0x3a, 0xcf, 0x1f, 0xe7, 0xd3, 0xc3, 0x6f, 0x73, 0x3c, 0xf9, 0xbf, 0x16,
++      0x8b, 0xe0, 0xcb, 0xaa, 0xdf, 0xe7, 0xcb, 0x1d, 0xef, 0xd5, 0xda, 0x04,
++      0xca, 0x5d, 0x6d, 0x7d, 0xd2, 0x96, 0xc8, 0xf4, 0x12, 0x5d, 0xd2, 0xfd,
++      0xdc, 0xff, 0x4b, 0xcc, 0xed, 0x42, 0xde, 0x96, 0xa3, 0xcd, 0x51, 0xa5,
++      0x4d, 0x06, 0xb4, 0x89, 0x28, 0x6d, 0x18, 0xef, 0x3d, 0xe3, 0xf1, 0x5b,
++      0x2b, 0xce, 0x8b, 0xb9, 0x5a, 0xe8, 0xba, 0xbd, 0xd4, 0xf9, 0xcf, 0x77,
++      0x6a, 0x7d, 0xd0, 0xa1, 0xee, 0x5b, 0x05, 0x7d, 0xc6, 0xf6, 0x66, 0xf5,
++      0x47, 0x4c, 0xbc, 0x15, 0xd7, 0x3c, 0x68, 0x10, 0xfa, 0xb9, 0x34, 0x05,
++      0x5f, 0x8d, 0x78, 0xb7, 0x3a, 0x5a, 0x7d, 0xc7, 0x3b, 0xaf, 0x92, 0xd2,
++      0x86, 0x32, 0x40, 0xbd, 0xb9, 0x1a, 0xf3, 0xed, 0x8e, 0xf6, 0x81, 0xbf,
++      0x7e, 0x81, 0xfe, 0x8d, 0x1a, 0x4f, 0x04, 0x21, 0xf3, 0x37, 0xa7, 0x3a,
++      0xbc, 0x18, 0xce, 0x41, 0x1b, 0x71, 0xeb, 0x54, 0x84, 0x31, 0x05, 0xda,
++      0x5b, 0xa4, 0x69, 0x1a, 0xf1, 0x2b, 0xf4, 0xf8, 0x82, 0xda, 0xa3, 0x3e,
++      0xdc, 0xbf, 0x8b, 0x18, 0x3f, 0x5c, 0x1f, 0xc6, 0x73, 0xbd, 0x06, 0x8b,
++      0x10, 0xdd, 0xa4, 0x67, 0x5a, 0x9a, 0x4a, 0xc4, 0x0e, 0x8a, 0xd7, 0x37,
++      0xee, 0xaa, 0x3e, 0x58, 0xda, 0xd7, 0x43, 0xb2, 0xbb, 0x6a, 0x2f, 0x18,
++      0x47, 0xc3, 0x87, 0x9f, 0x31, 0xf6, 0x20, 0x5f, 0xec, 0x53, 0x5c, 0x54,
++      0x70, 0x68, 0x1e, 0x67, 0x49, 0x9f, 0x74, 0x11, 0x7e, 0xb8, 0x8b, 0x33,
++      0xa4, 0xdf, 0x5d, 0x39, 0x76, 0xc2, 0x4d, 0xb1, 0x3e, 0x06, 0x7d, 0x70,
++      0x4c, 0x46, 0x10, 0x17, 0x8c, 0x04, 0xdb, 0x98, 0x57, 0x86, 0x6f, 0x98,
++      0xf3, 0x72, 0x8f, 0x7d, 0xcc, 0x99, 0xca, 0xd9, 0x39, 0xee, 0x9d, 0xb2,
++      0x6d, 0x62, 0xef, 0xd2, 0x14, 0xf7, 0x6b, 0xf2, 0x10, 0x6c, 0x5b, 0xd3,
++      0x2e, 0x7e, 0x79, 0x16, 0x03, 0xf8, 0x1d, 0x84, 0x3c, 0x70, 0x2c, 0x7e,
++      0xe7, 0x16, 0xe5, 0xdd, 0xf3, 0xbe, 0x6d, 0x0f, 0xc8, 0x3b, 0x4e, 0xe5,
++      0xd8, 0x71, 0x77, 0x0d, 0xcf, 0xc0, 0xcd, 0xb1, 0x66, 0xed, 0x38, 0x6e,
++      0x5e, 0x2a, 0x95, 0x05, 0x77, 0x61, 0x8d, 0xa5, 0xb4, 0xa4, 0xfc, 0xff,
++      0x03, 0x67, 0x78, 0xfd, 0x3e, 0x4b, 0x0c, 0xfd, 0x48, 0x9b, 0xcf, 0xd7,
++      0xfe, 0x6a, 0x6d, 0x81, 0xaf, 0xff, 0xc8, 0x8f, 0xe4, 0xcb, 0x45, 0xd9,
++      0xa9, 0xfa, 0x7f, 0xb9, 0xe7, 0x6a, 0x75, 0xbf, 0xef, 0xdf, 0x52, 0xbf,
++      0x93, 0x17, 0x63, 0x1a, 0x1f, 0x6c, 0x9a, 0x6e, 0xd4, 0x09, 0x4f, 0x78,
++      0x75, 0x85, 0xe5, 0x78, 0x6f, 0xbf, 0xa7, 0x17, 0x52, 0xea, 0x3b, 0xa7,
++      0x6c, 0xea, 0x07, 0xee, 0xa7, 0x45, 0x26, 0x2e, 0xdc, 0x01, 0x4d, 0x7c,
++      0x1d, 0xcc, 0xb8, 0xcf, 0xd7, 0x1d, 0x6d, 0x9e, 0x2f, 0x6c, 0x49, 0xcf,
++      0x59, 0xfa, 0x4e, 0x0e, 0xf4, 0x68, 0xbb, 0x64, 0xc6, 0x83, 0x92, 0x3c,
++      0x1b, 0x8b, 0x19, 0x5f, 0x97, 0xfc, 0x07, 0x79, 0xd3, 0x3e, 0xad, 0x45,
++      0xa1, 0xff, 0x6e, 0xe1, 0xda, 0x86, 0x9f, 0x21, 0xcf, 0x7b, 0xfd, 0x7b,
++      0x76, 0x03, 0x8f, 0xee, 0xf0, 0x78, 0x94, 0xf7, 0x2d, 0x53, 0xff, 0xc0,
++      0xd8, 0x9e, 0xb3, 0xdc, 0xa3, 0x79, 0xae, 0xe7, 0xac, 0x89, 0xd7, 0xeb,
++      0x9f, 0xeb, 0xab, 0x3e, 0x87, 0xfb, 0xf0, 0x7d, 0xcd, 0xdc, 0x3b, 0x07,
++      0xe1, 0xd3, 0xf5, 0xd1, 0xe6, 0xd0, 0x7e, 0x6f, 0x74, 0x77, 0x0a, 0xf9,
++      0x3d, 0xe1, 0xf1, 0x1c, 0xf5, 0x4d, 0xc4, 0xd3, 0x37, 0x4b, 0xf6, 0x65,
++      0xc4, 0xe0, 0x4f, 0x98, 0x13, 0xa9, 0xb1, 0x2f, 0x4f, 0x98, 0x77, 0xab,
++      0xb3, 0x2f, 0x77, 0x7b, 0xf3, 0xf8, 0xf7, 0x7c, 0xbd, 0xe2, 0xb7, 0x7d,
++      0xbd, 0xd2, 0xe8, 0xd3, 0xfa, 0xb4, 0xaf, 0xed, 0xaf, 0x8f, 0xf9, 0xf2,
++      0xcb, 0xe6, 0x5d, 0xb2, 0x88, 0xd9, 0xe8, 0x53, 0x26, 0x72, 0x06, 0x2f,
++      0x6d, 0x9d, 0xb1, 0x88, 0xfb, 0x70, 0x7e, 0x22, 0xe9, 0xc8, 0x1d, 0x8d,
++      0xad, 0x4f, 0x5e, 0x18, 0xd3, 0x3c, 0x4f, 0xc9, 0xf5, 0xf4, 0x4e, 0x74,
++      0x17, 0xe4, 0xea, 0x4a, 0x64, 0x09, 0x53, 0x34, 0x73, 0x34, 0x0d, 0x3b,
++      0x94, 0xd2, 0x7a, 0xd9, 0xf7, 0xb0, 0xdf, 0x41, 0xc5, 0x73, 0xad, 0x74,
++      0x5e, 0x94, 0x47, 0xec, 0x8a, 0xd6, 0x6e, 0x9a, 0x87, 0x8a, 0x47, 0x9b,
++      0x4f, 0xfb, 0x7c, 0x4f, 0x7e, 0x9a, 0x39, 0x3a, 0x31, 0x53, 0x19, 0x0e,
++      0x6d, 0xeb, 0xb5, 0xf3, 0x42, 0xbc, 0xfe, 0xb0, 0x1c, 0x52, 0xdc, 0xf0,
++      0xab, 0xb8, 0xbf, 0x97, 0xf1, 0x65, 0x22, 0xa4, 0x78, 0xe0, 0x44, 0x6c,
++      0x12, 0xb2, 0x98, 0x75, 0x89, 0xef, 0x5f, 0xa5, 0x38, 0xff, 0x92, 0xd0,
++      0xcf, 0x22, 0xa6, 0xe0, 0x05, 0x39, 0xe8, 0x6e, 0x74, 0x17, 0xc4, 0xf8,
++      0xbf, 0x59, 0xad, 0x09, 0xad, 0x90, 0x49, 0x37, 0xd4, 0x9c, 0x2e, 0x1b,
++      0x19, 0x18, 0x0d, 0xa6, 0x56, 0x9e, 0x70, 0xa2, 0xcd, 0x3b, 0xcb, 0x90,
++      0xf1, 0x32, 0xf4, 0x7f, 0x39, 0x16, 0x18, 0x51, 0x6c, 0xda, 0x57, 0x24,
++      0xdd, 0x41, 0x3f, 0x9f, 0xfa, 0xe4, 0x01, 0xb9, 0x69, 0x6f, 0x96, 0x9b,
++      0x5b, 0x88, 0xc3, 0xec, 0x47, 0x9b, 0xba, 0x64, 0x10, 0x7d, 0x49, 0xf4,
++      0x35, 0x2b, 0x3f, 0x6a, 0x7c, 0x06, 0x9d, 0x75, 0xd3, 0xa6, 0xae, 0x5a,
++      0xcf, 0x5f, 0xbc, 0xeb, 0x22, 0x68, 0x42, 0x6c, 0xc7, 0x56, 0xb4, 0xa9,
++      0xe3, 0xec, 0x86, 0xfe, 0x2e, 0xb4, 0xef, 0xc3, 0x1c, 0x4d, 0xfa, 0x7e,
++      0x96, 0xb3, 0xcd, 0xd4, 0x39, 0xeb, 0xc6, 0xac, 0x6e, 0x68, 0xff, 0xb1,
++      0xdd, 0xe0, 0x13, 0x3e, 0x25, 0xbd, 0x73, 0x29, 0xd9, 0xd5, 0x59, 0xdf,
++      0xfe, 0x77, 0x43, 0xbb, 0x4d, 0x56, 0xb6, 0x93, 0x0c, 0x4f, 0x75, 0xd4,
++      0xf7, 0xfb, 0xfc, 0xe4, 0xb7, 0x3b, 0xf1, 0xbe, 0x09, 0x18, 0xbc, 0xa4,
++      0xc6, 0x52, 0x37, 0xa3, 0x5c, 0xeb, 0x83, 0x86, 0x67, 0x78, 0xcd, 0x67,
++      0xf8, 0x2c, 0xf3, 0x7a, 0x9f, 0xb1, 0x1f, 0xcf, 0x30, 0x27, 0xc0, 0xbc,
++      0x06, 0x79, 0x76, 0xb9, 0x38, 0x8b, 0x63, 0x3e, 0x9f, 0x6f, 0xc8, 0x54,
++      0x79, 0xcf, 0xd7, 0x2b, 0xb1, 0x2a, 0x56, 0x6d, 0x67, 0xc1, 0xcf, 0x09,
++      0x93, 0x76, 0x5a, 0x93, 0x8a, 0xdd, 0x00, 0x9d, 0x0f, 0x80, 0xce, 0x0f,
++      0x05, 0x19, 0x17, 0xb6, 0x78, 0xb4, 0x76, 0x64, 0xa4, 0xfc, 0x5b, 0xc8,
++      0x38, 0x79, 0x14, 0x3e, 0x45, 0xd9, 0xf2, 0xf0, 0x19, 0x03, 0xb0, 0x69,
++      0xae, 0x04, 0x35, 0xef, 0x80, 0xf8, 0x7e, 0xf6, 0xba, 0x8c, 0x4c, 0x31,
++      0x27, 0x40, 0x7e, 0x66, 0x5c, 0x9f, 0xc2, 0xbd, 0x5b, 0x18, 0xeb, 0x42,
++      0x86, 0xc7, 0xc0, 0xaf, 0x21, 0x71, 0xa6, 0xb7, 0x4a, 0x6e, 0x7c, 0x4c,
++      0x7d, 0x80, 0x1e, 0xd8, 0xa8, 0xe3, 0xee, 0xa8, 0x9c, 0xb8, 0xb2, 0x01,
++      0xb2, 0xca, 0xb8, 0x5f, 0x73, 0x1a, 0x95, 0xb0, 0xfa, 0xe6, 0xf4, 0x39,
++      0x98, 0x87, 0x33, 0x35, 0x66, 0x23, 0xb7, 0x93, 0x31, 0x69, 0x1b, 0x95,
++      0x99, 0x0b, 0xb6, 0xe2, 0x5d, 0x52, 0x72, 0xa7, 0x42, 0xda, 0x65, 0xf7,
++      0xc6, 0xa1, 0xab, 0xe8, 0xcb, 0x9f, 0x8c, 0x98, 0xb3, 0x7c, 0x74, 0x2d,
++      0x63, 0xe2, 0xe4, 0x74, 0xed, 0x1c, 0x8a, 0x91, 0xc1, 0xbd, 0xd7, 0xda,
++      0x8d, 0xcc, 0x30, 0x3e, 0xfe, 0xa0, 0x92, 0x8a, 0x72, 0x4d, 0x8e, 0x65,
++      0xed, 0x96, 0x3c, 0xc2, 0xbd, 0x7d, 0xea, 0xf1, 0xf2, 0xcf, 0x30, 0x5f,
++      0x5c, 0x7a, 0x5e, 0x1f, 0xd3, 0xb8, 0xfe, 0x78, 0x5d, 0x0c, 0x6b, 0xf2,
++      0x05, 0x26, 0x8e, 0xbd, 0x2e, 0x93, 0xf3, 0xa4, 0x0f, 0x6d, 0x7c, 0x40,
++      0x5e, 0x73, 0x7a, 0xed, 0x27, 0xb5, 0xd6, 0x98, 0x48, 0xb1, 0x3e, 0xd3,
++      0xe2, 0x24, 0xed, 0x59, 0x09, 0x0d, 0x7e, 0x15, 0xd7, 0x8c, 0x6b, 0xf3,
++      0x6e, 0xaf, 0xfb, 0xa4, 0xf8, 0x38, 0x90, 0x8d, 0xa9, 0x15, 0x81, 0xdb,
++      0x95, 0xeb, 0x7b, 0x39, 0xc6, 0xe0, 0x40, 0x24, 0x40, 0x5a, 0xbd, 0xb7,
++      0x9e, 0xf8, 0x99, 0xfa, 0xfc, 0xdf, 0x83, 0x4f, 0xef, 0x19, 0x48, 0x9c,
++      0x62, 0x0c, 0x1b, 0x76, 0xbe, 0xb5, 0xd6, 0xbc, 0x6b, 0x2e, 0xb7, 0x5a,
++      0xb4, 0x7e, 0x76, 0xe4, 0x23, 0x87, 0x78, 0x88, 0x44, 0x6c, 0x85, 0xc5,
++      0x3c, 0x38, 0x75, 0x1c, 0x6b, 0x2a, 0xcc, 0xb9, 0x11, 0xc7, 0xdf, 0x2c,
++      0x97, 0xfb, 0x2c, 0x79, 0x30, 0x94, 0x8a, 0x5b, 0xb2, 0x29, 0x7e, 0x56,
++      0xb0, 0x26, 0xeb, 0x2b, 0xf3, 0x89, 0x1c, 0xc7, 0x87, 0xa6, 0x39, 0x5f,
++      0x5c, 0xe3, 0x95, 0xe4, 0xa6, 0x4a, 0xe5, 0x19, 0x57, 0x02, 0xc9, 0x7b,
++      0x3f, 0xac, 0xb0, 0x16, 0x6e, 0xbd, 0xfe, 0x45, 0x38, 0x05, 0xea, 0x8a,
++      0x55, 0x93, 0x06, 0x73, 0x78, 0xe2, 0x48, 0xcf, 0x3c, 0xdb, 0xdf, 0x7d,
++      0xc4, 0xb4, 0x4f, 0xa1, 0xdd, 0xe4, 0x61, 0x9d, 0xa6, 0x8e, 0xf4, 0x14,
++      0x9f, 0x5a, 0x6b, 0xe2, 0xef, 0x45, 0xc5, 0x7f, 0xbd, 0x5d, 0x17, 0xd3,
++      0xa4, 0x02, 0xe3, 0x85, 0xb1, 0xc0, 0x58, 0xc1, 0xea, 0x6b, 0x06, 0xad,
++      0xe6, 0x5c, 0xe6, 0x6a, 0xfc, 0x9c, 0x15, 0xf3, 0xfd, 0x22, 0xdf, 0x57,
++      0x8c, 0x14, 0x6b, 0x8a, 0x96, 0xfa, 0x42, 0x07, 0xe6, 0x98, 0xe3, 0x8f,
++      0xa8, 0x3e, 0x38, 0x38, 0xdf, 0x26, 0x79, 0x7b, 0x8d, 0xe4, 0x55, 0xc6,
++      0xa3, 0xaa, 0x03, 0x2c, 0xe7, 0x5e, 0xf4, 0x71, 0xdf, 0x4f, 0x28, 0x2e,
++      0xe2, 0xcd, 0x42, 0x17, 0xda, 0xcc, 0x35, 0x6f, 0x6f, 0xe8, 0xaf, 0xad,
++      0xcb, 0x26, 0x6c, 0xcb, 0x6a, 0xac, 0xc9, 0xb2, 0xaf, 0xb1, 0x16, 0x7b,
++      0x52, 0xae, 0x93, 0x6f, 0xca, 0x7e, 0xce, 0xdd, 0xf5, 0x72, 0xee, 0xdf,
++      0xee, 0x32, 0x18, 0x61, 0xc9, 0x84, 0x86, 0x9a, 0xfb, 0x8e, 0x4f, 0x05,
++      0x6f, 0x2d, 0xe5, 0x4f, 0xd1, 0x9e, 0xaf, 0xd6, 0xca, 0x71, 0xef, 0x39,
++      0x62, 0xc5, 0xe1, 0x57, 0xe4, 0xbc, 0xef, 0x0e, 0x78, 0xbf, 0xfa, 0xfc,
++      0xff, 0xd8, 0x53, 0x8b, 0xd6, 0xd9, 0xad, 0xba, 0x3a, 0xfb, 0xe3, 0x78,
++      0x96, 0x35, 0xf6, 0x5c, 0xa5, 0x09, 0xbc, 0xdb, 0x44, 0x9c, 0x48, 0x75,
++      0x3c, 0x75, 0xbc, 0xea, 0x72, 0x9d, 0x6b, 0xa7, 0x37, 0x57, 0x10, 0x7a,
++      0x7e, 0x62, 0xca, 0x1f, 0x73, 0x4c, 0x56, 0xf4, 0x27, 0x62, 0x41, 0x8b,
++      0x63, 0x8c, 0xbe, 0x4f, 0xbb, 0xc7, 0xa0, 0xc7, 0xa9, 0xf3, 0xf9, 0xde,
++      0x0e, 0x7c, 0x3d, 0xea, 0x02, 0xea, 0x73, 0xb5, 0x01, 0xf1, 0x3c, 0x74,
++      0xfd, 0x48, 0x59, 0x73, 0xf9, 0xb1, 0x87, 0x83, 0x89, 0x99, 0xac, 0xea,
++      0x06, 0xf8, 0x7b, 0xe5, 0x6b, 0xcc, 0x07, 0x9d, 0x92, 0x40, 0x6d, 0x9d,
++      0x86, 0xb1, 0x19, 0x6b, 0x1a, 0xad, 0xd0, 0x0d, 0x22, 0x57, 0xc1, 0x1b,
++      0x6f, 0xcc, 0x91, 0x5f, 0x83, 0x1d, 0x26, 0xbe, 0x5a, 0xd8, 0x6e, 0x49,
++      0x87, 0xd6, 0x3e, 0xf3, 0x4e, 0x84, 0xfe, 0xc9, 0x70, 0xb2, 0x1f, 0x7e,
++      0xb6, 0x62, 0x0f, 0x98, 0xaf, 0x9c, 0x40, 0x3c, 0x56, 0x9b, 0x63, 0x81,
++      0x7c, 0x8d, 0xb3, 0x3f, 0x0b, 0xbf, 0x72, 0xa9, 0xee, 0x91, 0x2f, 0x9e,
++      0xd0, 0xdc, 0x66, 0x69, 0xae, 0x55, 0x75, 0x6c, 0xa9, 0xf8, 0x30, 0xce,
++      0x45, 0x36, 0x5b, 0x43, 0x79, 0xaf, 0x3f, 0x2c, 0xc5, 0x22, 0xdb, 0xd2,
++      0xdd, 0xa4, 0xe7, 0xee, 0xd7, 0x76, 0x6c, 0x99, 0x85, 0xaf, 0x58, 0x9c,
++      0x77, 0xf0, 0xbf, 0x05, 0xff, 0x7d, 0xf8, 0xdf, 0x25, 0xe9, 0x69, 0xfa,
++      0xaf, 0xac, 0xe5, 0xb4, 0x36, 0xac, 0x1f, 0xf6, 0x70, 0xe0, 0xf4, 0x6b,
++      0x4d, 0x9c, 0x93, 0x2f, 0x36, 0xca, 0x09, 0xf3, 0xa4, 0xbe, 0x8e, 0x60,
++      0xbe, 0xd4, 0xaf, 0xf5, 0xd5, 0xd6, 0xb0, 0x2c, 0xaf, 0xee, 0x45, 0x9e,
++      0x6e, 0x91, 0x83, 0x45, 0xbf, 0x76, 0x15, 0x93, 0x43, 0xd5, 0xda, 0x95,
++      0x64, 0x82, 0x43, 0xb7, 0x1f, 0xcb, 0x4e, 0x29, 0x9e, 0xc0, 0xb2, 0x86,
++      0xae, 0x3f, 0x36, 0x39, 0xff, 0xce, 0x63, 0x4b, 0x98, 0x70, 0xdc, 0x9b,
++      0x5f, 0x0e, 0x33, 0x44, 0x2c, 0x1d, 0xbf, 0x93, 0x53, 0xdf, 0x0d, 0xfb,
++      0xf6, 0x63, 0x1e, 0xe2, 0xec, 0xe2, 0xf6, 0x12, 0x7e, 0xd9, 0x8f, 0x47,
++      0x89, 0x23, 0xe5, 0x73, 0xb5, 0xd8, 0x8f, 0x10, 0xce, 0x5f, 0x02, 0x96,
++      0x93, 0xc3, 0x3e, 0x2e, 0x76, 0x19, 0x3f, 0x90, 0x38, 0xd3, 0x44, 0x0d,
++      0xf6, 0xc8, 0xc7, 0x9a, 0x5e, 0xc4, 0x5c, 0x19, 0xf9, 0x7d, 0xf9, 0x71,
++      0xf9, 0x75, 0x79, 0x0c, 0xf2, 0x3d, 0x89, 0x39, 0xf7, 0xcb, 0xaf, 0xca,
++      0x7b, 0xe5, 0x5a, 0x79, 0x5c, 0xde, 0x2a, 0xef, 0x42, 0x4c, 0x35, 0x4a,
++      0xac, 0xa7, 0x87, 0x95, 0x1e, 0x96, 0x89, 0x73, 0x8a, 0x01, 0xbc, 0x45,
++      0xbf, 0xe7, 0x88, 0xfa, 0xd9, 0x01, 0xf2, 0xf4, 0x6f, 0x18, 0xcf, 0x13,
++      0x9b, 0x59, 0x2c, 0xfb, 0x18, 0x8e, 0x43, 0xdd, 0x58, 0xdb, 0xe6, 0x37,
++      0x29, 0x23, 0xe7, 0x22, 0x81, 0xd1, 0x73, 0xa1, 0xc0, 0x43, 0xfa, 0x7d,
++      0x0b, 0xeb, 0x9d, 0x15, 0x39, 0xe1, 0x3a, 0xe4, 0xcd, 0xc1, 0x11, 0xc8,
++      0xc2, 0x28, 0x54, 0xfd, 0x23, 0xce, 0x1a, 0x01, 0x49, 0x53, 0x1f, 0xc3,
++      0xcf, 0x4c, 0x9e, 0x76, 0x25, 0x5b, 0x98, 0x0d, 0x18, 0x3c, 0x9a, 0x8d,
++      0x76, 0x1f, 0xda, 0xbf, 0xf4, 0xda, 0x3b, 0x24, 0x7b, 0x41, 0x52, 0xef,
++      0xab, 0x3f, 0xfc, 0x73, 0xaf, 0x6f, 0x10, 0x7d, 0xe0, 0xcc, 0x57, 0xd8,
++      0xf7, 0x8a, 0xd7, 0xc7, 0x33, 0x61, 0xad, 0x3e, 0xae, 0x7c, 0x95, 0xb5,
++      0xc7, 0x85, 0xdf, 0x2f, 0x18, 0x4c, 0xe8, 0xfb, 0x5d, 0x46, 0xb7, 0x11,
++      0x13, 0xf8, 0xaf, 0x2e, 0xc6, 0x60, 0x45, 0xc8, 0xd7, 0x7a, 0xe8, 0xc4,
++      0xbf, 0x6f, 0x5e, 0x6a, 0x5b, 0x43, 0x9f, 0xd4, 0x60, 0xb4, 0x3f, 0x91,
++      0x9e, 0xf9, 0xdb, 0x1e, 0x9e, 0xf7, 0x30, 0xde, 0x0d, 0x67, 0x55, 0x20,
++      0x6e, 0x3c, 0x0e, 0xd9, 0x6e, 0x95, 0x35, 0x67, 0x48, 0xaf, 0x5e, 0xe8,
++      0xea, 0x14, 0xe4, 0xd6, 0x95, 0xb9, 0x72, 0x28, 0x30, 0x52, 0x48, 0x89,
++      0xc1, 0x53, 0x5b, 0x92, 0x89, 0xa6, 0xe4, 0xe4, 0x40, 0x62, 0x0b, 0xf3,
++      0x90, 0xd9, 0x7e, 0x57, 0x2e, 0x95, 0x69, 0x8f, 0x73, 0x72, 0x79, 0x20,
++      0xe1, 0x16, 0x85, 0xb8, 0x18, 0x57, 0x2e, 0x43, 0x36, 0xff, 0x70, 0x6e,
++      0x97, 0x1c, 0x2a, 0xa8, 0x1f, 0xdc, 0x1b, 0x96, 0x97, 0xe5, 0xd2, 0xc0,
++      0xcb, 0xb7, 0x2e, 0xb9, 0x93, 0x38, 0x53, 0xf2, 0xe1, 0x81, 0x6e, 0xb3,
++      0x6f, 0xc5, 0x21, 0x09, 0xf3, 0x21, 0x5a, 0x53, 0x73, 0x56, 0x48, 0x7a,
++      0x5f, 0xc4, 0x8b, 0xcb, 0xe1, 0x73, 0x07, 0xee, 0x33, 0xf5, 0x94, 0x80,
++      0xbf, 0xcf, 0x30, 0xfc, 0x18, 0x3e, 0xe7, 0xd3, 0xc6, 0x9f, 0xa7, 0x2b,
++      0x90, 0xbe, 0xd0, 0x26, 0xa1, 0x57, 0xbe, 0x0c, 0xba, 0x86, 0xe4, 0x40,
++      0x7f, 0xa5, 0xf2, 0x0d, 0x37, 0x14, 0x9f, 0x44, 0x8c, 0x82, 0xfd, 0xcb,
++      0xea, 0xd3, 0xed, 0xa0, 0x49, 0xb3, 0x44, 0x4f, 0xfb, 0xeb, 0xad, 0xf0,
++      0xb0, 0x0c, 0xe7, 0x57, 0x1b, 0x5b, 0xe6, 0x63, 0x1b, 0xfc, 0xf9, 0x0c,
++      0xa6, 0xac, 0xc7, 0xea, 0x0f, 0x78, 0xdf, 0x49, 0x78, 0xed, 0x7b, 0x03,
++      0x0f, 0x86, 0x3a, 0x24, 0xe4, 0xfc, 0x70, 0x1d, 0xb1, 0x91, 0x0b, 0x05,
++      0xbf, 0x1f, 0x7e, 0x62, 0xc8, 0xf7, 0x87, 0x65, 0xdb, 0xd2, 0x59, 0xcb,
++      0xb6, 0x9e, 0xf9, 0x6f, 0x7a, 0x73, 0xa6, 0xbc, 0xb1, 0x88, 0x39, 0x62,
++      0xab, 0xd4, 0x3e, 0x99, 0xb1, 0x9f, 0xc9, 0xb3, 0xfd, 0x89, 0x57, 0x15,
++      0x27, 0x5b, 0x7d, 0x86, 0xf7, 0x11, 0x43, 0x96, 0xf5, 0x99, 0xd8, 0x6e,
++      0xd0, 0x37, 0x13, 0xbb, 0xc7, 0x9e, 0xb5, 0x82, 0x01, 0xe3, 0x8f, 0x34,
++      0xc9, 0x0f, 0xa2, 0xb0, 0xdb, 0x88, 0xf1, 0xb2, 0xcc, 0x7f, 0xb9, 0x77,
++      0x3c, 0x3f, 0x85, 0x7d, 0x89, 0x53, 0x49, 0x6b, 0x02, 0xfb, 0xe3, 0x19,
++      0x10, 0x03, 0x6a, 0x81, 0x4e, 0x5d, 0x78, 0x3f, 0xc4, 0x4f, 0xfd, 0xfe,
++      0xfb, 0xaf, 0x86, 0x0e, 0xe3, 0xfe, 0x0d, 0x2e, 0x4c, 0x2c, 0xe6, 0x42,
++      0x86, 0x3d, 0x0c, 0x6c, 0xad, 0xdc, 0xfa, 0xd8, 0x58, 0x1f, 0x4f, 0x47,
++      0x8c, 0x52, 0x0c, 0x7e, 0x20, 0x65, 0x82, 0xbc, 0xd9, 0x89, 0xfe, 0x95,
++      0xb7, 0x53, 0xfa, 0xea, 0x7e, 0xdf, 0x87, 0x55, 0x6c, 0xf7, 0x64, 0x61,
++      0xaf, 0xc1, 0xe6, 0x59, 0x8b, 0x92, 0xea, 0x4e, 0xda, 0x27, 0xb0, 0xdf,
++      0x74, 0x28, 0x51, 0xcc, 0x49, 0x4c, 0x66, 0xa1, 0x2f, 0xde, 0x80, 0xec,
++      0x5f, 0x2b, 0xc7, 0x03, 0x69, 0xec, 0xe9, 0x60, 0x61, 0x48, 0x26, 0x2f,
++      0xe8, 0x37, 0x5f, 0xd0, 0xfb, 0x43, 0x52, 0x2a, 0x24, 0xb6, 0xcc, 0x82,
++      0xff, 0x66, 0x0b, 0xc4, 0x17, 0xf5, 0xc6, 0x47, 0x31, 0xe3, 0x42, 0x61,
++      0x23, 0xec, 0x83, 0xa4, 0x2e, 0xc1, 0xff, 0xb9, 0x54, 0xde, 0x02, 0x3e,
++      0xc3, 0xfd, 0xb2, 0x83, 0x5f, 0xe8, 0xcc, 0xf2, 0x00, 0xe4, 0x9c, 0x7b,
++      0xb1, 0x65, 0x6e, 0x33, 0xce, 0x8e, 0x38, 0x22, 0xc5, 0x8f, 0xff, 0x07,
++      0xe7, 0xeb, 0xbf, 0xf7, 0x76, 0xb5, 0xd3, 0xb3, 0xba, 0x2f, 0xd8, 0x65,
++      0xc4, 0x00, 0xd9, 0x7e, 0x63, 0xb7, 0xd3, 0x91, 0x76, 0x49, 0xdf, 0x43,
++      0x3b, 0xde, 0xa1, 0x31, 0xa2, 0xf2, 0x62, 0x84, 0xf7, 0xdf, 0x59, 0x67,
++      0xe8, 0x17, 0x6e, 0x68, 0xbf, 0x8d, 0xdf, 0x36, 0xe9, 0x74, 0xf8, 0x6b,
++      0xe3, 0xf7, 0xc6, 0x3a, 0xd6, 0x77, 0x3b, 0x9d, 0x24, 0xd6, 0xfa, 0x9d,
++      0x97, 0x2f, 0xc0, 0xf5, 0x2c, 0x9f, 0x59, 0xeb, 0xad, 0xcb, 0x79, 0xdb,
++      0x30, 0x4f, 0xab, 0xb7, 0x56, 0x9b, 0xe6, 0x27, 0xcd, 0x5a, 0x88, 0x71,
++      0x0b, 0xef, 0xad, 0xd3, 0xef, 0x8c, 0x61, 0x2f, 0xea, 0xdb, 0x7f, 0x5d,
++      0x47, 0xdc, 0x5c, 0xa7, 0xd3, 0xa6, 0x18, 0xcf, 0x9b, 0x1d, 0x1d, 0xb8,
++      0xe6, 0x9a, 0x1c, 0x63, 0xf2, 0xe1, 0xa5, 0x32, 0xe7, 0x67, 0x3b, 0x25,
++      0x47, 0x35, 0x9f, 0x61, 0xb0, 0x7c, 0xa5, 0xc2, 0xfd, 0x32, 0x79, 0x4e,
++      0xf1, 0x75, 0x33, 0x79, 0x8b, 0xdf, 0xbd, 0xf0, 0x3b, 0x39, 0xfa, 0x12,
++      0x63, 0x32, 0x81, 0xf3, 0xbb, 0x0c, 0x9f, 0x6a, 0xc1, 0x7c, 0x13, 0x8b,
++      0xbf, 0xfd, 0x38, 0x97, 0x10, 0x64, 0x8c, 0x32, 0x4a, 0x99, 0xc2, 0xf9,
++      0x8d, 0xdb, 0xf2, 0xee, 0x00, 0xe5, 0x79, 0x40, 0xae, 0x54, 0xe5, 0x39,
++      0x07, 0x79, 0xa6, 0x2c, 0xe7, 0x20, 0xd3, 0x86, 0xaf, 0xf7, 0xf1, 0x1b,
++      0x6b, 0x84, 0xeb, 0x25, 0xf5, 0x21, 0x2e, 0x82, 0xaf, 0x6d, 0x13, 0x97,
++      0x2b, 0x2e, 0xfe, 0x30, 0xf4, 0x5a, 0x93, 0xf7, 0x1d, 0x00, 0xae, 0xaf,
++      0xbc, 0x28, 0xe9, 0x0b, 0x2d, 0xd8, 0x77, 0xbc, 0x9b, 0x67, 0x96, 0xbd,
++      0xc2, 0x7f, 0x9f, 0x17, 0x89, 0x37, 0xa5, 0x3f, 0xcb, 0x6b, 0xc6, 0x79,
++      0xeb, 0x31, 0x66, 0x10, 0x74, 0x6e, 0xc1, 0xfc, 0xdc, 0xe3, 0x72, 0xe3,
++      0x78, 0x3f, 0x54, 0x83, 0x4f, 0xf5, 0xe9, 0xbd, 0x4a, 0xd7, 0xcc, 0xea,
++      0x37, 0x5a, 0x46, 0x06, 0x27, 0x0a, 0xe4, 0xfb, 0x18, 0xf8, 0x96, 0x3e,
++      0x31, 0xf9, 0x25, 0xa5, 0xe7, 0x50, 0x2a, 0x90, 0x7f, 0x43, 0x9a, 0xc3,
++      0xc8, 0xc2, 0xb6, 0xec, 0xd1, 0xf1, 0xb1, 0x25, 0xf9, 0xee, 0x0e, 0x68,
++      0xdc, 0x9d, 0x2d, 0xac, 0x94, 0x1e, 0xd5, 0x41, 0xdd, 0x1e, 0x6f, 0xc3,
++      0x5e, 0x28, 0x96, 0x7b, 0xbf, 0x1c, 0x29, 0x0f, 0x82, 0x0e, 0x31, 0x79,
++      0x06, 0x7e, 0xf3, 0x73, 0xe5, 0xbb, 0x64, 0x31, 0x82, 0x7d, 0x55, 0x65,
++      0x6c, 0x58, 0x9e, 0x9f, 0x8d, 0x7b, 0xd7, 0x09, 0x77, 0xd1, 0xda, 0x8e,
++      0x3d, 0x50, 0x9e, 0x28, 0x57, 0x1c, 0x17, 0x44, 0x2c, 0xc2, 0x79, 0x8f,
++      0x18, 0xdd, 0x86, 0x79, 0x8b, 0x11, 0xca, 0x2f, 0xf7, 0x16, 0xf2, 0x64,
++      0x96, 0x71, 0x15, 0xdf, 0xd9, 0xd8, 0xa4, 0x4c, 0xdd, 0x59, 0x24, 0x14,
++      0x07, 0xba, 0x74, 0x06, 0xfe, 0x3c, 0xbe, 0x5c, 0xfa, 0xdf, 0x51, 0x50,
++      0x8f, 0xc2, 0x56, 0x16, 0x60, 0x2b, 0x0b, 0xb0, 0x91, 0x90, 0x85, 0x6b,
++      0x05, 0xd8, 0xc8, 0x02, 0x6c, 0x24, 0xf4, 0xd9, 0x9b, 0x88, 0xed, 0xde,
++      0x00, 0x0f, 0x19, 0x5f, 0xfb, 0x30, 0x7d, 0x6d, 0xfc, 0xfd, 0x17, 0xea,
++      0x52, 0x61, 0x78, 0xd0, 0x71, 0x00, 0x00, 0x00 };
+ static const u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_RXP_b06FwRodata[(0x24/4) + 1] = {
+-      0x08004c28, 0x08004c28, 0x08004ba0, 0x08004bd8, 0x08004c0c, 0x08004c30,
+-      0x08004c30, 0x08004c30, 0x08004b10, 0x00000000 };
++      0x0800458c, 0x0800458c, 0x08004504, 0x0800453c, 0x08004570, 0x08004594,
++      0x08004594, 0x08004594, 0x08004474, 0x00000000 };
+ static struct fw_info bnx2_rxp_fw_06 = {
+-      /* Firmware version: 4.6.16 */
++      /* Firmware version: 4.4.2 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0x10,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x2,
+-      .start_addr                     = 0x080031d8,
++      .start_addr                     = 0x080031d0,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x70dc,
++      .text_len                       = 0x71cc,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_RXP_b06FwText,
+       .gz_text_len                    = sizeof(bnx2_RXP_b06FwText),
+@@ -2935,15 +2966,15 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_RXP_b06FwData,
+-      .sbss_addr                      = 0x08007120,
+-      .sbss_len                       = 0x54,
++      .sbss_addr                      = 0x08007220,
++      .sbss_len                       = 0x58,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08007178,
+-      .bss_len                        = 0x450,
++      .bss_addr                       = 0x08007278,
++      .bss_len                        = 0x44c,
+       .bss_index                      = 0x0,
+-      .rodata_addr                    = 0x080070dc,
++      .rodata_addr                    = 0x080071cc,
+       .rodata_len                     = 0x24,
+       .rodata_index                   = 0x0,
+       .rodata                         = bnx2_RXP_b06FwRodata,
+@@ -2966,571 +2997,639 @@
+ };
+ static u8 bnx2_rv2p_proc1[] = {
+-      /* Date:        02/03/2009 14:20 */
+-      0xa5, 0x56, 0x4f, 0x68, 0x14, 0x67, 0x14, 0x7f, 0x33, 0xbb, 0xb3, 0xb3,
+-      0x99, 0x9d, 0xd9, 0xdd, 0x92, 0x18, 0x96, 0x18, 0xcc, 0x1a, 0x84, 0x92,
+-      0x75, 0xb7, 0x6e, 0x6c, 0x0f, 0x42, 0x03, 0x29, 0xb9, 0x08, 0x35, 0x87,
+-      0x12, 0x11, 0x8a, 0x2d, 0x68, 0xb7, 0x22, 0x14, 0x0a, 0xa5, 0x07, 0x8f,
+-      0xa5, 0x83, 0x71, 0x53, 0x5a, 0xbc, 0xe4, 0xd0, 0x80, 0x42, 0x35, 0x27,
+-      0x5b, 0x62, 0x0e, 0x3b, 0xe0, 0xa1, 0x88, 0xe0, 0x41, 0x8f, 0x7a, 0xaa,
+-      0x7f, 0x5a, 0x28, 0x46, 0x29, 0xb5, 0x87, 0x82, 0xc7, 0xde, 0x9a, 0xe9,
+-      0xf7, 0xfe, 0x7c, 0xbb, 0x33, 0x5f, 0x66, 0x13, 0xa1, 0x42, 0xfc, 0xf1,
+-      0xbd, 0x79, 0xef, 0xfb, 0xde, 0x9f, 0xdf, 0x7b, 0x6f, 0xab, 0x00, 0x60,
+-      0x43, 0x18, 0x4d, 0x29, 0x04, 0x2b, 0x67, 0x15, 0x11, 0x00, 0x36, 0x81,
+-      0xff, 0x39, 0x3e, 0x9d, 0xc3, 0x23, 0x72, 0x3e, 0xcc, 0x10, 0x1e, 0xae,
+-      0xaa, 0xff, 0x3f, 0x85, 0xf9, 0x3a, 0x62, 0x0e, 0xe6, 0x0f, 0x22, 0x1e,
+-      0x85, 0xbb, 0xf5, 0x9a, 0xc2, 0x7f, 0x63, 0x08, 0xf1, 0x1c, 0xf4, 0x7e,
+-      0x8e, 0x4a, 0x74, 0xff, 0x96, 0xd8, 0xff, 0x9a, 0x63, 0x3c, 0xd6, 0xac,
+-      0x12, 0x3e, 0x5a, 0xc5, 0xf7, 0x4e, 0x9d, 0x82, 0x02, 0xda, 0x5d, 0x50,
+-      0x17, 0x23, 0x96, 0xd4, 0x83, 0x45, 0xb2, 0x03, 0xbb, 0xa2, 0x70, 0x12,
+-      0x9e, 0x2f, 0xa0, 0xfe, 0x1b, 0xde, 0xa5, 0x55, 0xc4, 0x12, 0x74, 0x9a,
+-      0xa8, 0x77, 0x00, 0xb2, 0xf5, 0x6a, 0x4a, 0x0f, 0xe5, 0x11, 0x84, 0x4d,
+-      0xc4, 0x11, 0x80, 0x56, 0xf2, 0x3d, 0xd7, 0x0a, 0x5b, 0x68, 0xff, 0x85,
+-      0xbc, 0xb7, 0x4f, 0xee, 0x51, 0x71, 0x47, 0x88, 0x3d, 0xb1, 0x53, 0x7f,
+-      0x2d, 0x96, 0xb3, 0xfe, 0x67, 0x4a, 0x4f, 0xc7, 0xe3, 0x73, 0xde, 0xa6,
+-      0x38, 0x1e, 0x57, 0xe2, 0x79, 0xb6, 0xaa, 0xf3, 0x86, 0xfa, 0xbf, 0xc7,
+-      0x69, 0x7d, 0xd8, 0x43, 0xff, 0x89, 0xd2, 0x4f, 0xdf, 0xcb, 0xf2, 0x5f,
+-      0x06, 0xf2, 0x99, 0xf4, 0xf7, 0xad, 0x06, 0xfa, 0xe7, 0x00, 0x34, 0x24,
+-      0x8f, 0xa4, 0xff, 0x30, 0xe6, 0x78, 0xe6, 0xe0, 0x90, 0x5d, 0x23, 0xbd,
+-      0x3c, 0xd4, 0x28, 0x3f, 0x1c, 0xef, 0x01, 0xc1, 0x25, 0xc1, 0x6b, 0x82,
+-      0x3f, 0x08, 0xc2, 0xff, 0xc4, 0xad, 0x21, 0xf2, 0x7d, 0x82, 0xfb, 0x0d,
+-      0xf9, 0x2d, 0xc1, 0xb7, 0x0c, 0x7b, 0xcf, 0x62, 0x7c, 0xac, 0xbf, 0xcb,
+-      0xf9, 0x5d, 0xc3, 0xfe, 0x4b, 0xe0, 0xfc, 0x58, 0x46, 0xde, 0x36, 0x85,
+-      0x87, 0x58, 0x77, 0xf9, 0x3e, 0xa3, 0xf5, 0x84, 0x37, 0x8d, 0xa4, 0xfe,
+-      0x8d, 0x5d, 0xf4, 0x59, 0x6d, 0x61, 0x26, 0xcb, 0xee, 0x7a, 0x2c, 0x79,
+-      0x14, 0x7b, 0xaf, 0x77, 0x67, 0x08, 0xef, 0xe7, 0x32, 0x79, 0x3f, 0x2e,
+-      0x71, 0xa8, 0xa6, 0x23, 0xfb, 0xdb, 0x16, 0xf3, 0xdb, 0x11, 0x5e, 0xee,
+-      0xc6, 0x63, 0xe1, 0xd5, 0x8c, 0xe6, 0x57, 0x9a, 0x57, 0xcc, 0x8f, 0x82,
+-      0xc1, 0x8f, 0x6f, 0xf7, 0xc8, 0x4b, 0xc9, 0x88, 0x6f, 0x39, 0xd6, 0xf9,
+-      0xb6, 0x45, 0x7c, 0xb1, 0x50, 0xa5, 0x7b, 0xbf, 0x8b, 0xe8, 0x38, 0xe6,
+-      0xaf, 0xe0, 0x39, 0x0f, 0x97, 0x23, 0x6d, 0x27, 0xfd, 0xd4, 0xd0, 0xef,
+-      0xb0, 0x7d, 0x20, 0x9f, 0x6d, 0x47, 0xfb, 0xc9, 0x72, 0x0f, 0xf0, 0x3c,
+-      0xda, 0x5b, 0x37, 0xf2, 0x56, 0xa7, 0xb8, 0x41, 0xe2, 0x07, 0x23, 0x7e,
+-      0x9d, 0xbf, 0x57, 0xc2, 0xf7, 0x49, 0x95, 0x0f, 0xfe, 0x3e, 0x05, 0xfa,
+-      0x7e, 0x9c, 0x0b, 0x45, 0x38, 0x7b, 0xbc, 0x42, 0xfe, 0x94, 0x0b, 0x7c,
+-      0xcd, 0x87, 0x15, 0xc6, 0x73, 0x1e, 0xe3, 0x9f, 0x9e, 0xca, 0x2d, 0xc4,
+-      0xf1, 0xf9, 0x12, 0x9f, 0x3f, 0x09, 0xf0, 0xde, 0x51, 0xf5, 0xb0, 0xb6,
+-      0xd7, 0x7e, 0xed, 0xe6, 0x0f, 0xbe, 0xaf, 0xdf, 0xd1, 0x7e, 0xe8, 0xf7,
+-      0xd2, 0x75, 0x19, 0xfe, 0x2e, 0x63, 0xc7, 0x4e, 0xe7, 0x21, 0x3f, 0xcb,
+-      0x78, 0xb5, 0x4d, 0x50, 0x5b, 0xf3, 0xd9, 0xee, 0x8a, 0x9f, 0xc7, 0xf3,
+-      0x3b, 0x57, 0x1e, 0xe0, 0xfd, 0xf6, 0xd1, 0xb5, 0x48, 0xfc, 0xab, 0xe8,
+-      0xba, 0x92, 0x1c, 0xa6, 0x81, 0xcf, 0x4b, 0xc2, 0x93, 0x25, 0xe2, 0x71,
+-      0x59, 0x7d, 0x42, 0x9c, 0x80, 0xd0, 0x26, 0x3d, 0xef, 0x3e, 0xd9, 0xe7,
+-      0x44, 0xae, 0xea, 0x37, 0x9d, 0xe6, 0xff, 0x16, 0xf3, 0xa2, 0x98, 0xe6,
+-      0xd3, 0x7c, 0x62, 0xce, 0x25, 0xf3, 0x61, 0xf5, 0x79, 0xb4, 0xb3, 0x8e,
+-      0xe9, 0x7a, 0x3d, 0x5a, 0xd5, 0xf9, 0x61, 0xbe, 0xb2, 0x9e, 0x2a, 0x56,
+-      0x8b, 0xd5, 0xc3, 0xb6, 0x24, 0x72, 0x56, 0xbe, 0xb7, 0x4c, 0xde, 0x66,
+-      0xf1, 0xbe, 0x6a, 0xf0, 0xb8, 0x21, 0xbc, 0x1f, 0xe9, 0xad, 0xbf, 0xd6,
+-      0x7e, 0xb8, 0x29, 0xbc, 0xaf, 0x0e, 0xf6, 0xc3, 0x26, 0xed, 0x27, 0x75,
+-      0x26, 0xf5, 0x5e, 0x98, 0x4b, 0xd5, 0xe9, 0x3d, 0xc8, 0xec, 0xef, 0xab,
+-      0x72, 0x4f, 0x5b, 0xfa, 0xbc, 0x90, 0xd8, 0x23, 0xa4, 0x5e, 0x06, 0xf2,
+-      0xc3, 0x35, 0xfa, 0x74, 0x2c, 0x96, 0x77, 0x54, 0xbf, 0x65, 0xc5, 0xeb,
+-      0xc2, 0x5f, 0xc2, 0x83, 0x0e, 0xf5, 0x93, 0x33, 0xf6, 0xf9, 0xed, 0x54,
+-      0x9d, 0x00, 0x0e, 0xea, 0xfd, 0x90, 0xf4, 0x2b, 0xb9, 0xdf, 0xf0, 0xbe,
+-      0x1a, 0x74, 0x66, 0x93, 0x7b, 0xee, 0x72, 0xbf, 0xdf, 0x03, 0xea, 0xa3,
+-      0xf2, 0x8e, 0xbe, 0xd4, 0xf3, 0xac, 0xde, 0x4c, 0xf6, 0xf7, 0x98, 0xcc,
+-      0x2f, 0x5b, 0xf6, 0x73, 0xc9, 0x8c, 0x53, 0xed, 0xbd, 0xec, 0x7a, 0x71,
+-      0xbc, 0xff, 0x6c, 0xbf, 0xde, 0xbc, 0xdb, 0xab, 0xee, 0x9e, 0x51, 0xf7,
+-      0xbf, 0xb7, 0x75, 0x1e, 0x6d, 0x27, 0x6b, 0xbf, 0x7f, 0xa0, 0xee, 0x15,
+-      0x7d, 0x99, 0x1b, 0x67, 0xea, 0x59, 0x7c, 0x2d, 0xee, 0xd0, 0x4b, 0xcf,
+-      0x2f, 0xed, 0xe7, 0xc6, 0x06, 0xd7, 0xfd, 0xa3, 0xb8, 0xbf, 0x97, 0x52,
+-      0xf3, 0x75, 0x44, 0xea, 0xac, 0xf4, 0xc8, 0xbf, 0xa7, 0xdb, 0x83, 0x79,
+-      0x9c, 0xe4, 0xcd, 0x49, 0xe1, 0xab, 0x3d, 0xb7, 0x4e, 0xfd, 0xe1, 0x76,
+-      0x5e, 0x1a, 0x75, 0x98, 0x6d, 0x62, 0xfd, 0xbf, 0x86, 0x48, 0xfc, 0xfc,
+-      0x2d, 0xe5, 0x6f, 0x20, 0xfd, 0x55, 0x80, 0x9f, 0x22, 0x1d, 0x97, 0xae,
+-      0x1b, 0xe3, 0x8f, 0x4d, 0xe9, 0x93, 0x7e, 0x7c, 0xf8, 0xee, 0xa2, 0xbc,
+-      0x5b, 0x85, 0x1b, 0x91, 0x9e, 0x63, 0x38, 0xd7, 0x5c, 0x68, 0xcb, 0xdc,
+-      0x3c, 0x2b, 0xf3, 0xeb, 0x85, 0xc7, 0xf3, 0xb1, 0x73, 0x82, 0x78, 0x08,
+-      0xe3, 0x32, 0xc7, 0x3a, 0x01, 0x9f, 0x27, 0x02, 0xfe, 0x7d, 0xd8, 0x76,
+-      0x7d, 0xd2, 0x9b, 0x08, 0x18, 0xc7, 0x4b, 0x68, 0x57, 0x83, 0x3f, 0x16,
+-      0x49, 0xbd, 0x39, 0x98, 0x63, 0xe6, 0xfc, 0x92, 0x38, 0xdf, 0x46, 0xb9,
+-      0xda, 0x93, 0xd3, 0x7c, 0xe6, 0x3a, 0xfb, 0x7d, 0x5e, 0x5f, 0x97, 0xaa,
+-      0xd4, 0x2b, 0xc9, 0x3c, 0xeb, 0x3e, 0xba, 0x69, 0xe4, 0x57, 0xd7, 0xe7,
+-      0xcd, 0x58, 0xcf, 0xf7, 0xe9, 0xe3, 0xe8, 0x6f, 0x05, 0xca, 0x2e, 0xf3,
+-      0x82, 0x51, 0xdd, 0x63, 0xbb, 0x68, 0x36, 0xd9, 0x95, 0x79, 0xd8, 0xbd,
+-      0x48, 0xd7, 0x2c, 0x76, 0xb5, 0x7c, 0x81, 0x1a, 0x61, 0x69, 0xe3, 0x1e,
+-      0xc9, 0xcb, 0x51, 0x8e, 0xe5, 0xee, 0x09, 0x9d, 0xaf, 0x0a, 0xc5, 0xbf,
+-      0xc6, 0xf9, 0xfa, 0xf8, 0x7b, 0xc6, 0xd3, 0xf0, 0x3e, 0xa1, 0x37, 0x98,
+-      0xe3, 0x45, 0x42, 0x08, 0x92, 0x73, 0xdc, 0x51, 0xee, 0x55, 0xc9, 0x9f,
+-      0x41, 0xfd, 0xcc, 0xfd, 0xb8, 0x5b, 0x1d, 0x47, 0x13, 0xfc, 0xd3, 0x75,
+-      0x34, 0xe7, 0x39, 0xf1, 0xc4, 0xe0, 0x63, 0x77, 0x08, 0x1f, 0xad, 0x21,
+-      0x7c, 0x36, 0xe7, 0xd6, 0x57, 0xd2, 0xc7, 0x79, 0x70, 0x72, 0xb4, 0x70,
+-      0xfd, 0xfc, 0x32, 0xd5, 0xd5, 0xee, 0xf2, 0x0f, 0x08, 0xdf, 0x59, 0xb1,
+-      0x28, 0x5f, 0xfe, 0x0a, 0xeb, 0xe5, 0x59, 0x5e, 0xd3, 0xf8, 0xcd, 0xb2,
+-      0xfe, 0xbd, 0xf1, 0x1f, 0xb6, 0x34, 0x9b, 0xb9, 0xa0, 0x0c, 0x00, 0x00,
+-      0x00 };
++      /* Date:        05/13/2008 13:50 */
++      0xa5, 0x56, 0x4f, 0x48, 0x14, 0x61, 0x14, 0x7f, 0x3b, 0xfb, 0x67, 0xd6,
++      0xdd, 0xd9, 0x9d, 0x25, 0xff, 0x6d, 0x66, 0xb8, 0x49, 0x97, 0xd5, 0x15,
++      0xb5, 0x22, 0x3a, 0x18, 0x86, 0x17, 0x21, 0x3b, 0x84, 0x20, 0x45, 0x04,
++      0xd9, 0x12, 0xde, 0x82, 0x0e, 0xd1, 0x29, 0x68, 0xd1, 0x34, 0x8a, 0x0a,
++      0x16, 0x52, 0x30, 0xa2, 0xa4, 0x43, 0x85, 0x04, 0xed, 0x74, 0x0a, 0x12,
++      0x82, 0x8a, 0x88, 0xea, 0x12, 0x78, 0xa8, 0x4b, 0x16, 0x61, 0xd0, 0xa1,
++      0x83, 0x9d, 0xba, 0xe4, 0xf4, 0xbd, 0xef, 0xbd, 0xcf, 0x9d, 0xf9, 0x9c,
++      0x55, 0x21, 0x41, 0x7f, 0xbc, 0x6f, 0xde, 0x7b, 0xdf, 0x9b, 0xdf, 0x7b,
++      0xef, 0x37, 0x66, 0x00, 0xc0, 0x80, 0x92, 0xd3, 0x26, 0x10, 0x52, 0x46,
++      0x28, 0x2e, 0x20, 0x04, 0xf0, 0x18, 0xe8, 0x27, 0x6a, 0x49, 0xbb, 0xd4,
++      0xcd, 0x76, 0x27, 0x41, 0xa9, 0x33, 0x23, 0xfe, 0x9e, 0x85, 0xfe, 0x1c,
++      0x62, 0x18, 0xfa, 0x77, 0x21, 0x1e, 0x84, 0x17, 0xb9, 0xac, 0xc0, 0xbf,
++      0x2e, 0x94, 0xd0, 0x6e, 0xa8, 0x3c, 0x73, 0x92, 0x32, 0xff, 0x12, 0xc7,
++      0x7f, 0x0a, 0x13, 0x1e, 0x28, 0xc4, 0x29, 0x0f, 0x23, 0x74, 0x65, 0x24,
++      0x2c, 0x96, 0xd1, 0x1e, 0x19, 0x81, 0x18, 0xe6, 0x99, 0x12, 0x0e, 0x68,
++      0xb7, 0x86, 0x4a, 0x5d, 0x5c, 0x97, 0x41, 0x7e, 0x5f, 0xca, 0x36, 0x9e,
++      0xc3, 0xd7, 0x01, 0xb4, 0xb7, 0x27, 0x2e, 0x97, 0x11, 0xb3, 0x30, 0x16,
++      0xb7, 0xe8, 0x7d, 0xda, 0x28, 0xed, 0x52, 0x07, 0xc6, 0x09, 0xdf, 0x0e,
++      0xce, 0x1b, 0xc5, 0xbc, 0x3f, 0x5d, 0xca, 0x8b, 0xf9, 0xbc, 0x79, 0x5a,
++      0x45, 0x1e, 0x3c, 0x8f, 0x71, 0x5d, 0x31, 0xad, 0xae, 0x98, 0xa8, 0x83,
++      0x79, 0x00, 0x55, 0x07, 0x62, 0xa3, 0xb8, 0x17, 0xf3, 0xae, 0xf0, 0x7b,
++      0x03, 0x9c, 0xca, 0x71, 0x7e, 0x07, 0xb1, 0xc2, 0xf9, 0xc4, 0x2f, 0xbf,
++      0xc7, 0xfa, 0x3c, 0x8a, 0x27, 0x7f, 0xfd, 0x66, 0x41, 0x3d, 0x57, 0xfd,
++      0xc0, 0x7b, 0x3e, 0x8a, 0x7b, 0xbc, 0xfe, 0xb0, 0x89, 0xff, 0x7b, 0xe1,
++      0xef, 0xcf, 0x4b, 0xe7, 0x6f, 0xab, 0xe7, 0xf9, 0x20, 0xde, 0xa2, 0x1a,
++      0x6f, 0x2f, 0x99, 0xb7, 0x41, 0xd8, 0x6d, 0x64, 0xa5, 0x5f, 0x04, 0x10,
++      0x77, 0x88, 0x02, 0x10, 0x77, 0x32, 0x1e, 0x63, 0xbc, 0xc9, 0x78, 0x83,
++      0xb1, 0x91, 0xb1, 0x81, 0xb1, 0x9e, 0x71, 0x1b, 0xe3, 0x3b, 0xc6, 0x0c,
++      0xa3, 0xcd, 0x98, 0x66, 0x7c, 0xc3, 0x68, 0x31, 0x26, 0xb5, 0x7c, 0x2d,
++      0x8c, 0x71, 0xc6, 0xbb, 0x8c, 0xfb, 0xb5, 0xf8, 0xdf, 0x8c, 0x0b, 0x8c,
++      0xcd, 0x21, 0xc2, 0x43, 0x6c, 0x23, 0xa1, 0x3c, 0xf7, 0x3e, 0xbe, 0xee,
++      0xaf, 0xf5, 0x77, 0xb1, 0xcc, 0xcf, 0xf3, 0xca, 0x2f, 0x2e, 0xf9, 0x83,
++      0x0e, 0xaf, 0xff, 0x9d, 0x0d, 0xfc, 0xc9, 0x6d, 0x20, 0x1f, 0x14, 0x37,
++      0xed, 0x52, 0x1d, 0xb7, 0x38, 0xbe, 0xbe, 0xb2, 0x50, 0x63, 0x8f, 0xfa,
++      0x0a, 0xfa, 0x7c, 0x05, 0xed, 0xd1, 0x4e, 0xde, 0xa3, 0xa3, 0xeb, 0xe6,
++      0x97, 0xe6, 0xd4, 0xbb, 0x87, 0x32, 0x4f, 0x8d, 0x39, 0x7f, 0x1a, 0x2a,
++      0x16, 0xb2, 0x34, 0x17, 0xa5, 0x8d, 0xee, 0xc5, 0x78, 0x9e, 0xcb, 0xbc,
++      0x9a, 0x4f, 0xff, 0x5c, 0xd2, 0x7c, 0xc5, 0xb4, 0xf9, 0xba, 0xb0, 0x09,
++      0xbf, 0x49, 0x8d, 0xa7, 0x73, 0xae, 0xea, 0x97, 0xc1, 0xc7, 0xe3, 0xb1,
++      0x8c, 0xcc, 0x7b, 0xcd, 0x91, 0x66, 0x83, 0x35, 0x85, 0x76, 0x04, 0xae,
++      0x3b, 0x2a, 0x8e, 0xf7, 0xb2, 0x43, 0xdd, 0x43, 0xf1, 0x29, 0x20, 0x9e,
++      0xe7, 0x34, 0x9e, 0x73, 0x5b, 0xd2, 0xa9, 0x15, 0xb7, 0xaa, 0x53, 0xf4,
++      0xbc, 0x0d, 0xbc, 0x3a, 0x15, 0x87, 0xd1, 0x41, 0x5b, 0xde, 0x9b, 0x8e,
++      0x51, 0x9a, 0xe3, 0x36, 0xe1, 0x99, 0x04, 0xe1, 0x72, 0xa2, 0x4e, 0xfc,
++      0x75, 0xdd, 0xb1, 0x24, 0xd9, 0xa7, 0x53, 0x6a, 0x3f, 0x54, 0xbc, 0xaa,
++      0x6b, 0xa3, 0x7a, 0xf0, 0x7e, 0x75, 0x8f, 0xaa, 0x43, 0xdd, 0xe7, 0xe7,
++      0xbf, 0xf6, 0xbd, 0x84, 0x45, 0xc3, 0xcf, 0xc3, 0xed, 0x1e, 0xc2, 0x48,
++      0xaf, 0x84, 0xec, 0x8c, 0x45, 0x71, 0xb3, 0x56, 0x04, 0xed, 0x7d, 0xb3,
++      0x1f, 0x30, 0xbf, 0xb1, 0x67, 0xc6, 0xe1, 0xfa, 0x6c, 0xd5, 0x3f, 0x79,
++      0x0e, 0xed, 0x40, 0xf6, 0x30, 0xcf, 0xc3, 0xb0, 0x9c, 0x7b, 0xb1, 0xd7,
++      0x06, 0x62, 0x0b, 0x94, 0xa4, 0xae, 0x1b, 0x89, 0xd7, 0x32, 0x3e, 0xcc,
++      0xe7, 0xa2, 0x4f, 0xed, 0xfe, 0x7d, 0x59, 0xa2, 0xfe, 0xc7, 0xfd, 0x73,
++      0xd3, 0xed, 0x06, 0xcf, 0x63, 0xa2, 0x32, 0x57, 0x0e, 0xea, 0xd7, 0x73,
++      0xd6, 0xbd, 0x2c, 0x14, 0x7b, 0x6b, 0xe9, 0xb1, 0xfa, 0x0e, 0x2a, 0x3d,
++      0x92, 0xc7, 0x95, 0x52, 0xd8, 0xc7, 0xcb, 0x21, 0x28, 0x04, 0xe5, 0x7f,
++      0xa2, 0xbe, 0x2f, 0x01, 0x7b, 0xb4, 0xd9, 0xbd, 0xbe, 0xfc, 0x69, 0x28,
++      0x04, 0xed, 0x81, 0xa9, 0xed, 0x8d, 0xcd, 0x7b, 0xd3, 0xbc, 0x6e, 0x7e,
++      0x95, 0x4e, 0xe4, 0x36, 0xd4, 0x89, 0xff, 0xd5, 0x05, 0x03, 0x48, 0x17,
++      0x50, 0x8f, 0xfd, 0xf7, 0x9b, 0xaa, 0x7e, 0x6d, 0xff, 0xa9, 0xee, 0x3f,
++      0xab, 0x5b, 0xd3, 0x11, 0xef, 0xfb, 0x07, 0xe9, 0x48, 0x42, 0xd3, 0x85,
++      0x5f, 0xab, 0x55, 0x1d, 0xc1, 0xe7, 0xf3, 0xf3, 0xd4, 0x97, 0x8b, 0xee,
++      0x9a, 0xae, 0xfb, 0xf8, 0xac, 0x63, 0x3e, 0x85, 0x9f, 0x8c, 0x5f, 0xd6,
++      0xe2, 0x55, 0x5f, 0xcf, 0x33, 0xcf, 0x46, 0x1f, 0xcd, 0x95, 0x59, 0xfc,
++      0xa1, 0xf1, 0xdd, 0x5b, 0xc0, 0xbd, 0xb8, 0x04, 0x0e, 0xf3, 0xf6, 0xd9,
++      0xc7, 0x5f, 0x8a, 0xf5, 0xc1, 0x84, 0x47, 0x8e, 0xe2, 0x59, 0xf5, 0x87,
++      0xf0, 0xa1, 0xf4, 0xcf, 0x6c, 0xc2, 0x77, 0x06, 0x1e, 0x38, 0x6a, 0xbf,
++      0x6d, 0x99, 0xaf, 0x87, 0xf5, 0x64, 0x94, 0xf7, 0xfa, 0x5b, 0x82, 0x74,
++      0xa3, 0x38, 0x24, 0xf7, 0x14, 0x9a, 0x78, 0xbf, 0x8b, 0x29, 0xb2, 0x5b,
++      0x52, 0xf4, 0x7f, 0x5b, 0x8f, 0x69, 0x49, 0xbf, 0x96, 0x14, 0x61, 0x53,
++      0x12, 0xe3, 0xb2, 0xf0, 0xfd, 0x88, 0x74, 0x2f, 0x54, 0xf7, 0x5b, 0xdf,
++      0x6b, 0x7e, 0xdf, 0xbd, 0x78, 0xde, 0x24, 0xf6, 0xd4, 0xdb, 0x0f, 0x6b,
++      0x4d, 0x5f, 0xef, 0x71, 0xf5, 0x39, 0xdb, 0xcb, 0xb7, 0x9a, 0xdb, 0x67,
++      0x35, 0xfa, 0x34, 0xe8, 0x2a, 0xdd, 0x6b, 0x1f, 0xc4, 0x7a, 0x6d, 0x48,
++      0x9b, 0x34, 0x1f, 0x84, 0x22, 0x8f, 0x61, 0x62, 0x58, 0xeb, 0x24, 0xeb,
++      0xc4, 0xe4, 0xb8, 0x4c, 0x73, 0x64, 0x52, 0x9d, 0x0f, 0xc8, 0xc1, 0x1f,
++      0x9e, 0x7f, 0x25, 0xcf, 0xd3, 0x4e, 0x98, 0xce, 0xcd, 0x21, 0xc5, 0x97,
++      0x2d, 0xdf, 0x7f, 0x86, 0xf8, 0x3a, 0x39, 0x4d, 0x78, 0x02, 0x0e, 0x4b,
++      0x4c, 0x54, 0xf5, 0x2d, 0x2e, 0x11, 0x52, 0x5e, 0x7d, 0x8b, 0x8a, 0xf2,
++      0xd0, 0xae, 0xf3, 0xf4, 0x51, 0xff, 0x6e, 0x6c, 0xb5, 0x9f, 0x5e, 0x9d,
++      0xc4, 0x7e, 0xea, 0x7a, 0x27, 0xe7, 0x46, 0x9b, 0xcf, 0x72, 0x8d, 0xf9,
++      0xcc, 0xd5, 0x98, 0x6f, 0x5d, 0x2f, 0xae, 0xf2, 0xde, 0x45, 0x20, 0x1a,
++      0x96, 0x1f, 0x24, 0x2b, 0x32, 0x21, 0xfb, 0x6b, 0x4c, 0xd2, 0x87, 0xd4,
++      0x8a, 0x4e, 0x85, 0x24, 0x6f, 0xd6, 0x14, 0xf9, 0x45, 0xe8, 0x3c, 0xab,
++      0xf0, 0xca, 0x84, 0xfa, 0xee, 0xfe, 0x03, 0x65, 0x6c, 0x9a, 0x59, 0x40,
++      0x0c, 0x00, 0x00, 0x00 };
+ static u8 bnx2_rv2p_proc2[] = {
+-      /* Date:        02/03/2009 14:20 */
+-      0xad, 0x57, 0x4d, 0x68, 0x5c, 0x55, 0x14, 0x3e, 0xf3, 0xe6, 0xef, 0xcd,
+-      0xcc, 0x9b, 0xcc, 0x34, 0x8d, 0x93, 0x31, 0x29, 0x26, 0x4d, 0x68, 0xea,
+-      0xc8, 0x44, 0xf3, 0x47, 0x05, 0x5d, 0x18, 0x46, 0x48, 0x7f, 0x2c, 0x34,
+-      0x8d, 0x2e, 0x8a, 0x9b, 0x36, 0x53, 0x3b, 0x3a, 0x6d, 0xed, 0xc2, 0xec,
+-      0xdc, 0xf8, 0xb0, 0x35, 0x41, 0x98, 0x45, 0x53, 0x4c, 0x13, 0x44, 0xa8,
+-      0xe8, 0xce, 0xdd, 0x88, 0x9a, 0xd6, 0x8d, 0x50, 0x68, 0x28, 0x76, 0x51,
+-      0x04, 0x05, 0xed, 0x42, 0x10, 0xad, 0xa1, 0x15, 0x41, 0x51, 0xb3, 0x92,
+-      0x8c, 0xf7, 0x9e, 0xef, 0xdc, 0x37, 0xef, 0x4d, 0xa6, 0xa4, 0x0b, 0x67,
+-      0xf3, 0xe5, 0xdc, 0x77, 0xee, 0xb9, 0xe7, 0xe7, 0x3b, 0xe7, 0xde, 0x64,
+-      0x89, 0x28, 0x42, 0x6e, 0xbd, 0x4f, 0x21, 0x85, 0xc2, 0x21, 0x5b, 0x41,
+-      0x83, 0x28, 0x9a, 0xd7, 0x32, 0x59, 0x24, 0xbf, 0x27, 0xb2, 0x0c, 0xdf,
+-      0xd6, 0x1d, 0xad, 0x46, 0x6e, 0x41, 0xeb, 0xd9, 0xf4, 0x92, 0x05, 0xbd,
+-      0x08, 0x69, 0x54, 0x3a, 0xae, 0xc6, 0x1d, 0x82, 0xcf, 0x08, 0x46, 0x42,
+-      0xc0, 0xb0, 0xa0, 0xd5, 0x82, 0x24, 0x7a, 0x5d, 0x22, 0x6f, 0x8a, 0xec,
+-      0x08, 0xe6, 0x65, 0xfd, 0xb4, 0xe0, 0xab, 0xb2, 0x7e, 0x47, 0x70, 0x5d,
+-      0xa1, 0xf1, 0x53, 0xcb, 0xbf, 0x35, 0x9a, 0xb2, 0x03, 0xf3, 0x05, 0xf8,
+-      0xff, 0x62, 0x3f, 0xeb, 0x37, 0x82, 0xfa, 0x77, 0x1b, 0xc6, 0x0f, 0x13,
+-      0xaf, 0x15, 0xd5, 0xfa, 0xbb, 0x27, 0x2e, 0x2f, 0x62, 0xdf, 0xf1, 0x7e,
+-      0xac, 0x3f, 0x56, 0xd4, 0x71, 0xc7, 0xc8, 0x15, 0xa4, 0x61, 0x9b, 0xe3,
+-      0x70, 0x87, 0x4d, 0xa2, 0xa0, 0xff, 0xe3, 0x22, 0xa4, 0xd9, 0x34, 0xec,
+-      0x26, 0x03, 0x76, 0x73, 0x5b, 0xec, 0x7e, 0x9f, 0xf0, 0xdb, 0xff, 0x54,
+-      0xec, 0x27, 0xb7, 0xb5, 0x5f, 0x4e, 0x03, 0x77, 0x16, 0xdb, 0x9d, 0x93,
+-      0xd8, 0xc6, 0xff, 0xd3, 0xdb, 0xda, 0x7f, 0xd3, 0xf3, 0xdf, 0xac, 0x03,
+-      0xfb, 0xf0, 0xf9, 0x13, 0xf7, 0x29, 0x93, 0x47, 0x13, 0xaf, 0xf8, 0x15,
+-      0x06, 0x4e, 0x16, 0x19, 0x6a, 0x27, 0x25, 0xb1, 0x53, 0x43, 0xfa, 0xbc,
+-      0x4e, 0x8a, 0x58, 0xda, 0xce, 0x5e, 0x3b, 0x76, 0x0d, 0xeb, 0xc7, 0x32,
+-      0xc0, 0x57, 0x24, 0x80, 0xbb, 0x49, 0x9d, 0x90, 0x46, 0xa3, 0x92, 0x12,
+-      0xfb, 0x28, 0x23, 0xb9, 0x29, 0xec, 0x5f, 0x73, 0xb4, 0x5f, 0xb7, 0x54,
+-      0xdd, 0xb4, 0x1c, 0x26, 0x37, 0x13, 0xf4, 0xff, 0x0a, 0x41, 0x6f, 0xc7,
+-      0x5e, 0xac, 0x5e, 0xac, 0x40, 0xee, 0xfd, 0x38, 0xcb, 0xfa, 0x2b, 0x75,
+-      0x13, 0x87, 0x5e, 0x57, 0xfc, 0xcf, 0xc0, 0x0e, 0x0d, 0xd8, 0x7c, 0x18,
+-      0xf2, 0xa3, 0x0e, 0x1d, 0x36, 0xf6, 0xf0, 0xbb, 0xbc, 0xc7, 0xf0, 0x09,
+-      0x72, 0x25, 0xc6, 0x90, 0x9f, 0x9d, 0xd7, 0xfe, 0x66, 0xe8, 0x84, 0xa5,
+-      0x1d, 0xb1, 0x24, 0xbe, 0xb0, 0xed, 0x7c, 0x01, 0xfd, 0xaf, 0xfa, 0x1c,
+-      0xf6, 0xad, 0x32, 0x8e, 0x7d, 0x5d, 0x63, 0xc0, 0xa5, 0xb1, 0xa8, 0x86,
+-      0x62, 0x65, 0x8e, 0xc5, 0x27, 0x7f, 0x1e, 0xb5, 0x59, 0xcf, 0x1d, 0x36,
+-      0x7c, 0x35, 0x79, 0xd7, 0xf1, 0x5e, 0x6c, 0xf2, 0x76, 0x10, 0xf9, 0xf9,
+-      0x75, 0x8f, 0xd6, 0x57, 0x49, 0x1a, 0xc0, 0x39, 0x33, 0xd5, 0x76, 0x7c,
+-      0x7f, 0x57, 0xed, 0x7b, 0xb8, 0xfa, 0x4d, 0x72, 0xdc, 0x93, 0x12, 0x7f,
+-      0xbf, 0xf0, 0x63, 0x57, 0x1b, 0x7e, 0x64, 0xf8, 0xef, 0xfb, 0xa5, 0x2c,
+-      0xe7, 0xef, 0x08, 0xd6, 0x2f, 0x4d, 0xad, 0x22, 0xcf, 0x07, 0x39, 0x7e,
+-      0x4a, 0x5e, 0xf8, 0x1c, 0xbb, 0x66, 0xd3, 0x5a, 0x7e, 0x79, 0xa2, 0xf2,
+-      0x25, 0xe4, 0x72, 0x58, 0xcb, 0xc7, 0x9c, 0x93, 0x57, 0xa1, 0x1f, 0x3d,
+-      0x9f, 0xe5, 0xbc, 0x1d, 0x91, 0x53, 0x0e, 0xaa, 0x51, 0xa1, 0x7e, 0xb5,
+-      0xd8, 0x79, 0x16, 0x9d, 0x35, 0xfe, 0x9e, 0xa5, 0x85, 0x3a, 0xbe, 0x9f,
+-      0x4b, 0xe9, 0xb8, 0xce, 0xa8, 0xb8, 0x58, 0xaf, 0xab, 0x1a, 0xc3, 0xfe,
+-      0xda, 0xa2, 0xb6, 0x17, 0xa2, 0x7b, 0x9f, 0x69, 0xf9, 0x70, 0xf1, 0x1e,
+-      0xf4, 0x8b, 0xd5, 0x79, 0x31, 0x6c, 0x21, 0x6f, 0xf7, 0x2d, 0xe8, 0x0b,
+-      0xad, 0x92, 0x11, 0xae, 0x5b, 0x88, 0x9c, 0x29, 0xe0, 0x3b, 0xfc, 0xfd,
+-      0xdf, 0x50, 0x8d, 0xf3, 0xf5, 0x7c, 0x47, 0x64, 0xd5, 0xe4, 0x47, 0x30,
+-      0x63, 0xe2, 0x02, 0x3e, 0x2c, 0x6f, 0xe7, 0x1d, 0xc3, 0x57, 0xa9, 0x57,
+-      0xe1, 0x41, 0x7c, 0x05, 0x4e, 0x0d, 0x01, 0x63, 0x83, 0x5a, 0x2f, 0xda,
+-      0x86, 0xb7, 0xc1, 0xba, 0x48, 0x5d, 0x7d, 0xfc, 0x62, 0x50, 0xbc, 0x0a,
+-      0xf0, 0x4c, 0xf1, 0x98, 0xe7, 0x90, 0xca, 0xa7, 0xe1, 0x8b, 0x36, 0x14,
+-      0xa7, 0x33, 0x62, 0xaf, 0x2a, 0x71, 0x9d, 0x95, 0xb8, 0x7e, 0x4f, 0x9a,
+-      0xbc, 0x9b, 0x78, 0x80, 0x0b, 0x5e, 0x3c, 0x86, 0x6f, 0xb8, 0x1f, 0x66,
+-      0xaa, 0x01, 0x7f, 0x6a, 0x37, 0x06, 0xf0, 0x47, 0xef, 0x20, 0xd0, 0x8b,
+-      0x73, 0x88, 0xfb, 0xa4, 0xa3, 0xfb, 0xaa, 0xf1, 0x43, 0xd7, 0x75, 0x43,
+-      0xf8, 0x6a, 0xa9, 0x78, 0xfd, 0xfd, 0xd9, 0xd3, 0xa6, 0x3f, 0x83, 0xfd,
+-      0x62, 0xe2, 0x3f, 0x97, 0xe6, 0x01, 0x34, 0x71, 0x7b, 0x3d, 0xd8, 0x0f,
+-      0xe0, 0x7f, 0xdc, 0xe3, 0x51, 0xd7, 0x3e, 0xc9, 0x93, 0x60, 0xee, 0x69,
+-      0x6d, 0x6f, 0x5a, 0xec, 0x8f, 0x88, 0x7d, 0xc7, 0xd7, 0x8f, 0xda, 0xbf,
+-      0x3e, 0xaf, 0x0f, 0x4d, 0x7d, 0x9a, 0xfd, 0x68, 0xf2, 0xc4, 0xe7, 0x17,
+-      0x6f, 0xaf, 0xeb, 0xfd, 0xbd, 0xdb, 0xf4, 0xe7, 0x23, 0x9e, 0xbd, 0xef,
+-      0xbc, 0x7e, 0xd4, 0xdf, 0x53, 0xf4, 0x9c, 0x88, 0xc1, 0x39, 0xf3, 0x87,
+-      0x9a, 0x33, 0x1c, 0x87, 0xed, 0xac, 0xca, 0x5c, 0x99, 0xd3, 0xe7, 0xe4,
+-      0xc5, 0xef, 0xbc, 0x99, 0xeb, 0xca, 0x6f, 0x99, 0x3f, 0xc7, 0xfd, 0x73,
+-      0x24, 0xde, 0xe6, 0x3c, 0xc0, 0x64, 0xb1, 0x35, 0x5f, 0xc8, 0x3b, 0xec,
+-      0xaa, 0xfc, 0x9b, 0x39, 0x30, 0x6e, 0xec, 0x43, 0x74, 0x47, 0xfd, 0xfa,
+-      0xad, 0xf5, 0x89, 0x3c, 0x60, 0x9e, 0x6d, 0x6c, 0xe2, 0xde, 0xfd, 0x67,
+-      0xb3, 0x79, 0x1f, 0x07, 0xea, 0xe8, 0x12, 0xd7, 0x3d, 0xae, 0xea, 0xcf,
+-      0xef, 0x03, 0xef, 0x9e, 0xb7, 0xa2, 0x7a, 0x5d, 0xe5, 0x42, 0x78, 0xf5,
+-      0xfa, 0xe3, 0xb2, 0xbf, 0x80, 0xb9, 0xf4, 0xda, 0x29, 0xce, 0xff, 0x7b,
+-      0x67, 0x37, 0x78, 0x3e, 0x7d, 0xf8, 0xc6, 0x35, 0x1d, 0xd7, 0xa3, 0xb4,
+-      0x3e, 0xe7, 0xb0, 0x3f, 0xa5, 0xdd, 0x50, 0xdf, 0x78, 0xb6, 0xb5, 0x1e,
+-      0x78, 0xd7, 0xa0, 0x5e, 0x4a, 0x6f, 0x36, 0x78, 0xaf, 0x36, 0xfd, 0x43,
+-      0xbf, 0xec, 0xcf, 0x40, 0xdf, 0xf4, 0x73, 0xb0, 0xae, 0x77, 0x36, 0x9b,
+-      0x73, 0xd7, 0xe4, 0x3b, 0xc8, 0xd3, 0xa3, 0xe3, 0x7e, 0xbb, 0x83, 0xb4,
+-      0x56, 0x87, 0xdd, 0x69, 0xe9, 0xc3, 0x13, 0x72, 0xf0, 0x4f, 0xc9, 0x0c,
+-      0x9f, 0x53, 0x7e, 0x81, 0x79, 0x46, 0xb9, 0x14, 0xe2, 0x2c, 0x1f, 0xc6,
+-      0xf7, 0x72, 0x1a, 0xeb, 0x3d, 0x69, 0xdc, 0x6f, 0xd3, 0x71, 0x87, 0xf5,
+-      0x7b, 0xd2, 0xc0, 0x9c, 0xf4, 0xeb, 0x9a, 0x37, 0x8f, 0x80, 0x2b, 0x31,
+-      0x7f, 0xff, 0x46, 0xe8, 0x7a, 0x4c, 0x2b, 0xa8, 0xcb, 0xba, 0x80, 0xfe,
+-      0x2b, 0x0d, 0x39, 0xfc, 0x7d, 0xa6, 0x80, 0xb9, 0x4a, 0x03, 0xc1, 0xfb,
+-      0x50, 0xfa, 0xb9, 0xa7, 0x39, 0xb7, 0xfc, 0x73, 0x2d, 0x31, 0xb6, 0x5c,
+-      0x0f, 0xde, 0x97, 0x2b, 0x31, 0xff, 0x9c, 0xd0, 0x76, 0x59, 0x54, 0xf3,
+-      0xc1, 0x3f, 0xd7, 0xc2, 0x52, 0xef, 0xbf, 0x64, 0x0e, 0xec, 0xa4, 0x9b,
+-      0x75, 0xc4, 0xb5, 0x56, 0x6f, 0xcd, 0xb3, 0x39, 0xcf, 0xd8, 0x83, 0xdf,
+-      0x26, 0x8e, 0xa6, 0x7d, 0x9c, 0x7f, 0x4a, 0xfc, 0xfc, 0x85, 0xdf, 0x21,
+-      0x39, 0x89, 0x47, 0xdb, 0xc5, 0xfa, 0x01, 0x99, 0xb3, 0xae, 0x27, 0x07,
+-      0xe7, 0xe3, 0x34, 0xfb, 0xd5, 0x49, 0x78, 0x77, 0xe4, 0xbc, 0xbe, 0x36,
+-      0xf1, 0x75, 0x8d, 0x00, 0x97, 0x46, 0x4c, 0x1d, 0x4c, 0xbd, 0x4c, 0x7d,
+-      0x50, 0xc7, 0xdc, 0x28, 0xab, 0x4d, 0x94, 0x47, 0x99, 0xa7, 0x23, 0xe5,
+-      0x3f, 0x83, 0xef, 0xb4, 0xa3, 0x45, 0xad, 0xff, 0x16, 0x7d, 0xc3, 0x7d,
+-      0x44, 0xf4, 0x83, 0x60, 0x73, 0x1e, 0x49, 0x01, 0x02, 0xef, 0xb2, 0x30,
+-      0x5d, 0x8f, 0xca, 0xf2, 0xb8, 0xe9, 0x9b, 0x60, 0xdf, 0x5d, 0xe1, 0x77,
+-      0xfa, 0xc2, 0xe6, 0xd6, 0xfe, 0x37, 0xf1, 0x69, 0xbd, 0x61, 0xe1, 0xa1,
+-      0x4d, 0xa5, 0xfd, 0x78, 0xd7, 0x74, 0xc4, 0xc1, 0xf3, 0x8e, 0xb8, 0xbf,
+-      0x4e, 0x8a, 0x0f, 0x89, 0xb8, 0x16, 0x77, 0x75, 0x26, 0x38, 0x8e, 0x4b,
+-      0x5f, 0xdf, 0xe2, 0xcf, 0x1f, 0x2d, 0xa7, 0xb0, 0xde, 0x5d, 0x82, 0xf9,
+-      0x08, 0xf3, 0x35, 0x4c, 0x17, 0xc0, 0xe7, 0x0f, 0x96, 0x80, 0xef, 0xd3,
+-      0x21, 0xd8, 0xe9, 0x7c, 0x9b, 0xef, 0x71, 0xbb, 0x1b, 0xe9, 0xac, 0x2d,
+-      0x0b, 0x4f, 0xf3, 0x16, 0xff, 0x3f, 0xd2, 0xa0, 0xb4, 0xbc, 0x5b, 0xa5,
+-      0xcf, 0xc0, 0xcf, 0x88, 0xaf, 0xce, 0xdb, 0xf1, 0x55, 0xa3, 0xa3, 0xf8,
+-      0x88, 0xed, 0xc2, 0x5b, 0xbb, 0x95, 0xb7, 0xa6, 0x8e, 0x79, 0xab, 0x2d,
+-      0x4f, 0xf7, 0x05, 0x79, 0x1a, 0x13, 0x9e, 0xfe, 0xed, 0xcd, 0xd3, 0xad,
+-      0x76, 0x31, 0xc7, 0x6f, 0xfe, 0x6f, 0xbc, 0x05, 0x1e, 0x18, 0xd4, 0xe7,
+-      0x77, 0xfb, 0xf8, 0x67, 0xfc, 0xf2, 0xcf, 0x9f, 0x43, 0x6a, 0xae, 0xfe,
+-      0x07, 0x92, 0xe2, 0x88, 0x7c, 0xe0, 0x0d, 0x00, 0x00, 0x00 };
++      /* Date:        05/13/2008 13:50 */
++      0xad, 0x58, 0x4d, 0x6c, 0x54, 0x55, 0x14, 0xbe, 0x7d, 0xf3, 0xdb, 0x99,
++      0x37, 0x3f, 0xb4, 0xb5, 0xbf, 0x68, 0xa1, 0x95, 0xd2, 0x92, 0x29, 0x94,
++      0x69, 0x01, 0x95, 0x44, 0x49, 0x31, 0x05, 0x94, 0x84, 0x52, 0x5d, 0x10,
++      0x37, 0xd0, 0x22, 0xa5, 0x83, 0x2d, 0x69, 0x28, 0x61, 0xc1, 0xc6, 0x09,
++      0xc5, 0xe2, 0x62, 0x12, 0x2d, 0xb1, 0x14, 0x8c, 0xc1, 0x46, 0x37, 0xc4,
++      0xb8, 0x19, 0x83, 0x52, 0xd4, 0xc4, 0x84, 0x60, 0x43, 0x70, 0x01, 0x26,
++      0x9a, 0xe0, 0x42, 0x13, 0xa2, 0x50, 0x0b, 0x36, 0x58, 0x7e, 0x46, 0x17,
++      0xca, 0x78, 0xef, 0xf9, 0xce, 0x7d, 0x7d, 0x6f, 0x3a, 0xb5, 0x2c, 0xe8,
++      0xe6, 0xeb, 0xbd, 0xef, 0xdc, 0x73, 0xcf, 0xcf, 0x77, 0xcf, 0x39, 0x6d,
++      0x54, 0x08, 0xe1, 0x16, 0xc9, 0x74, 0xb5, 0x44, 0x11, 0x32, 0x0a, 0xfc,
++      0x12, 0xb2, 0x42, 0x78, 0xca, 0xd5, 0x5a, 0x18, 0x82, 0x7f, 0x56, 0x44,
++      0x09, 0x7e, 0x48, 0xab, 0xef, 0x3e, 0xf1, 0xaa, 0x81, 0xef, 0x6e, 0xa1,
++      0x30, 0x22, 0x44, 0x52, 0x61, 0x94, 0x71, 0x3d, 0x63, 0x86, 0x31, 0x58,
++      0x00, 0x6c, 0x66, 0x7c, 0xc0, 0xfb, 0x77, 0x78, 0x7d, 0x93, 0xf1, 0x6f,
++      0xde, 0x37, 0x19, 0x6f, 0xf3, 0xfe, 0xf3, 0x06, 0x30, 0xc1, 0xfb, 0x3f,
++      0x4b, 0xd4, 0x76, 0xa9, 0xf5, 0x74, 0x56, 0x24, 0xe5, 0x19, 0x21, 0xc5,
++      0x1b, 0xf4, 0xbe, 0x49, 0x90, 0x6c, 0x80, 0xdd, 0xaf, 0x2c, 0x51, 0x72,
++      0xbf, 0xe7, 0x91, 0x53, 0xfb, 0x37, 0xb2, 0xd0, 0x3b, 0xeb, 0xaf, 0xe1,
++      0x51, 0xe7, 0x96, 0xb6, 0x9c, 0x18, 0xc6, 0xf9, 0x9d, 0x4b, 0xb0, 0xff,
++      0x54, 0x4c, 0xf9, 0xef, 0x15, 0x49, 0x46, 0xd1, 0xa8, 0xd0, 0x28, 0x48,
++      0x36, 0xea, 0x40, 0x41, 0xfe, 0x97, 0x61, 0xac, 0x3a, 0x43, 0xd0, 0x1b,
++      0x70, 0xe8, 0x2d, 0x9d, 0xa3, 0xf7, 0x5a, 0xa1, 0x5d, 0xff, 0x67, 0xac,
++      0x3f, 0xb0, 0xa0, 0xfe, 0xae, 0x10, 0xb0, 0x38, 0x96, 0xef, 0x9e, 0xc2,
++      0x05, 0xec, 0xdf, 0xb7, 0xa0, 0xfe, 0xc3, 0x96, 0xfd, 0x3a, 0x6e, 0xfa,
++      0x3b, 0xb0, 0x1a, 0x62, 0x9f, 0x24, 0x57, 0xe9, 0x78, 0x6a, 0xbf, 0xd9,
++      0x3e, 0x17, 0x70, 0x43, 0x8c, 0x20, 0xb5, 0x9b, 0x03, 0xdc, 0x56, 0xa7,
++      0xee, 0x2d, 0x12, 0x6e, 0x43, 0xe9, 0x59, 0xee, 0xf7, 0x9e, 0xc7, 0xfe,
++      0x8e, 0x08, 0xf0, 0x75, 0x76, 0xe4, 0x46, 0x40, 0x05, 0x26, 0x9b, 0xed,
++      0x0e, 0xb2, 0x7e, 0xa4, 0x55, 0x24, 0x83, 0x38, 0x3f, 0x61, 0x2a, 0xfb,
++      0x2e, 0xcb, 0xfc, 0xa9, 0xb5, 0x4b, 0x24, 0x23, 0x4e, 0x3f, 0x3e, 0x14,
++      0x90, 0x5b, 0xb4, 0x1c, 0xbb, 0xef, 0x76, 0x63, 0x5d, 0xf5, 0x71, 0x94,
++      0xe4, 0x4f, 0xa6, 0xb5, 0x1f, 0x6a, 0x5f, 0xbe, 0x83, 0x08, 0xf4, 0x88,
++      0x1a, 0x3f, 0x5d, 0x86, 0x38, 0xc9, 0x4b, 0x1b, 0xb5, 0x3e, 0xfc, 0x9c,
++      0x58, 0xa6, 0xf9, 0x85, 0x75, 0xb7, 0x97, 0xa0, 0xbc, 0x73, 0x48, 0xd9,
++      0x1b, 0x11, 0xbb, 0x0c, 0x65, 0x88, 0xc1, 0xfe, 0xb9, 0xfc, 0xe6, 0x17,
++      0x90, 0xff, 0xa6, 0xda, 0x24, 0xdb, 0xba, 0x9b, 0x71, 0xae, 0x24, 0x0e,
++      0x1c, 0x89, 0x7b, 0x14, 0xc4, 0xba, 0x07, 0x68, 0xb9, 0xf2, 0xd7, 0xd5,
++      0x7e, 0x92, 0x4b, 0x36, 0x6a, 0xfe, 0xea, 0xb8, 0x2b, 0x7f, 0xdf, 0xc9,
++      0x5a, 0xfc, 0xaf, 0x45, 0x7c, 0x6e, 0x2e, 0x53, 0xf2, 0x32, 0x48, 0x35,
++      0xb8, 0xa7, 0x23, 0x91, 0x8f, 0xff, 0x6f, 0xdb, 0xf8, 0xff, 0x68, 0x79,
++      0xdc, 0x40, 0xfe, 0x6f, 0xe0, 0x38, 0x2c, 0x61, 0xbe, 0x2c, 0xce, 0xc3,
++      0x97, 0x08, 0xfd, 0x7e, 0xab, 0x35, 0x4a, 0x71, 0xdc, 0x86, 0xfd, 0xe3,
++      0x6d, 0xe7, 0x10, 0xef, 0x2d, 0x14, 0x07, 0x11, 0x38, 0xfa, 0x39, 0x4e,
++      0x75, 0x86, 0xd4, 0xfa, 0xb5, 0x96, 0xee, 0x2f, 0xb1, 0xee, 0x72, 0xa9,
++      0xf5, 0x0e, 0x73, 0xf7, 0x38, 0xe4, 0x3d, 0x83, 0x51, 0x8a, 0xdf, 0x36,
++      0xbe, 0x65, 0x8b, 0xab, 0x40, 0x41, 0xca, 0x3b, 0x48, 0x4b, 0x73, 0x82,
++      0xbe, 0x47, 0xc5, 0xb1, 0x34, 0xbe, 0xef, 0x0f, 0x52, 0x7d, 0x90, 0xfe,
++      0x91, 0x5c, 0x49, 0xc2, 0x8b, 0xf3, 0xa9, 0x61, 0x3f, 0xf9, 0x3b, 0x75,
++      0x56, 0xad, 0xb7, 0xc6, 0xa6, 0x20, 0x1f, 0x4b, 0x0c, 0xb1, 0x62, 0x03,
++      0xf1, 0xbb, 0x65, 0x40, 0x9e, 0xe9, 0x15, 0x70, 0x53, 0xfe, 0x0a, 0x84,
++      0xd9, 0x06, 0x7c, 0x8b, 0xbe, 0xff, 0x53, 0x90, 0xa2, 0x78, 0x6d, 0x0c,
++      0xbb, 0xcf, 0xe9, 0xf8, 0x30, 0x46, 0xb4, 0x5f, 0xc0, 0x47, 0xe5, 0xef,
++      0x90, 0xa9, 0x79, 0xcb, 0x79, 0x6b, 0x98, 0x8f, 0xb7, 0xc0, 0xb6, 0x3a,
++      0xa0, 0xb7, 0x56, 0xc9, 0x79, 0xf2, 0xf0, 0xd7, 0x99, 0x17, 0xce, 0xab,
++      0x8d, 0x67, 0x04, 0x92, 0x5f, 0x0e, 0xbe, 0x49, 0x3e, 0x53, 0x5d, 0x92,
++      0xf1, 0xd4, 0xbc, 0x51, 0x8a, 0x7c, 0xe2, 0x0d, 0xd6, 0x97, 0x60, 0xbf,
++      0x7a, 0xd9, 0xaf, 0xe9, 0x80, 0x8e, 0xbb, 0xf6, 0x07, 0x78, 0xcc, 0x04,
++      0xbf, 0x3a, 0x12, 0xda, 0x2f, 0x27, 0x7f, 0xd9, 0x9e, 0xd4, 0xb7, 0x35,
++      0xf8, 0xa5, 0xaa, 0x16, 0x68, 0xf9, 0x59, 0x47, 0xef, 0x25, 0x5c, 0x36,
++      0xae, 0xed, 0x50, 0x79, 0xfd, 0x4b, 0xe6, 0x15, 0xf9, 0x39, 0x99, 0xb6,
++      0xbf, 0xd3, 0xca, 0x3c, 0xef, 0xd4, 0xf9, 0x6e, 0xb4, 0xff, 0xfb, 0x43,
++      0x54, 0x88, 0x5a, 0xae, 0x4c, 0x3a, 0xdf, 0x05, 0xf8, 0xef, 0xb3, 0x78,
++      0x54, 0xb2, 0x96, 0xe3, 0xc4, 0x58, 0xba, 0x4e, 0xe9, 0x6b, 0x67, 0xfd,
++      0x4d, 0xac, 0xdf, 0xb4, 0xbd, 0x4b, 0x65, 0xdf, 0x93, 0xd6, 0x7b, 0xd4,
++      0xf9, 0x99, 0x7d, 0x97, 0x3a, 0x4e, 0x74, 0x7f, 0xec, 0xca, 0xa4, 0x3a,
++      0x5f, 0xb5, 0xc0, 0x3b, 0x2d, 0xb6, 0xf4, 0xfd, 0x68, 0xbd, 0x47, 0xf5,
++      0x3d, 0x28, 0x5e, 0xe0, 0xa5, 0xb3, 0xde, 0xfc, 0x29, 0xeb, 0x0d, 0xf9,
++      0xe1, 0x37, 0xcf, 0x71, 0x7d, 0x19, 0x50, 0xf7, 0x94, 0xb3, 0xdd, 0xe5,
++      0xba, 0xce, 0x4b, 0xbb, 0xb9, 0x0e, 0xed, 0xb4, 0xd7, 0x13, 0x8f, 0xad,
++      0x2e, 0xa8, 0xb5, 0x2b, 0x4f, 0x9f, 0x74, 0xc4, 0x33, 0x29, 0x22, 0x98,
++      0x03, 0x92, 0x11, 0x25, 0x7f, 0x4f, 0xcc, 0xad, 0x2b, 0xb9, 0xf6, 0x23,
++      0x1e, 0x9d, 0x46, 0x88, 0xe4, 0xae, 0xf7, 0xab, 0x73, 0xd7, 0xac, 0x3e,
++      0x8e, 0x3a, 0x73, 0x91, 0xed, 0x5d, 0xcc, 0xf6, 0x4a, 0x7d, 0x8d, 0xc4,
++      0x53, 0xff, 0xf5, 0x7e, 0xbb, 0xbd, 0x77, 0x1e, 0xce, 0x7f, 0x9f, 0x33,
++      0xef, 0xfd, 0xdc, 0x6f, 0xb8, 0x4f, 0xfa, 0x77, 0x7f, 0xa5, 0xed, 0xe1,
++      0x7b, 0x23, 0xfa, 0x7e, 0x93, 0xf2, 0x32, 0x39, 0xa0, 0xce, 0x87, 0x05,
++      0xd3, 0x44, 0xf4, 0xd5, 0xa3, 0xae, 0x4d, 0xef, 0x81, 0xfd, 0x7d, 0x75,
++      0xea, 0xfe, 0x16, 0x81, 0x7e, 0xe3, 0x96, 0x21, 0x45, 0x7d, 0xbf, 0x38,
++      0x9c, 0x2f, 0x8f, 0x5f, 0xb3, 0xdc, 0x38, 0xfb, 0x15, 0x65, 0xbf, 0x36,
++      0x4b, 0xbf, 0x28, 0xee, 0xfc, 0x3d, 0x9f, 0xdf, 0x6c, 0xa7, 0xd0, 0xfd,
++      0x9b, 0xcf, 0x91, 0x5c, 0x0f, 0xcb, 0xb9, 0xe7, 0xed, 0xdb, 0x99, 0xe5,
++      0x54, 0x87, 0x4f, 0x1f, 0xa6, 0x7a, 0x1a, 0xb2, 0xf8, 0xe6, 0xb4, 0x6f,
++      0xe2, 0x31, 0xc4, 0x51, 0xc9, 0x2d, 0x12, 0x7b, 0xc3, 0xf3, 0xc5, 0xcb,
++      0xad, 0xb6, 0xc7, 0x66, 0xc6, 0x75, 0xbc, 0x4d, 0xf2, 0x73, 0x72, 0x80,
++      0xe6, 0xc2, 0x9c, 0x38, 0x1a, 0xb6, 0x38, 0x42, 0x1e, 0xf3, 0x4a, 0xbe,
++      0xf8, 0xe5, 0xeb, 0x8b, 0x9f, 0x3e, 0xd4, 0x7c, 0x3a, 0xe2, 0xd5, 0xf6,
++      0x2b, 0x5c, 0x65, 0xe5, 0xf3, 0x00, 0xcf, 0x23, 0x19, 0x93, 0x7e, 0x89,
++      0x4f, 0xa7, 0x68, 0x69, 0x56, 0x9c, 0x51, 0x72, 0x2b, 0xe2, 0x07, 0xd8,
++      0xce, 0xcb, 0x2e, 0xf8, 0xd1, 0xb3, 0x07, 0xeb, 0x2b, 0x5c, 0xdf, 0xee,
++      0x72, 0x9d, 0xda, 0xee, 0x07, 0x4e, 0xd7, 0x93, 0x7f, 0xf1, 0x03, 0xe7,
++      0xb5, 0x7e, 0xd2, 0x6b, 0x66, 0x38, 0x3e, 0x2f, 0xba, 0xd8, 0xee, 0x1a,
++      0xca, 0x47, 0xfc, 0x0e, 0xbd, 0x4f, 0xb7, 0x68, 0x5d, 0xaa, 0xb0, 0x42,
++      0xc6, 0x81, 0xed, 0x59, 0x0f, 0xec, 0xf0, 0x71, 0x5c, 0x1b, 0x72, 0xf3,
++      0x85, 0x6d, 0x6f, 0x0d, 0x9f, 0xef, 0xc4, 0xda, 0xc7, 0xf5, 0x65, 0x94,
++      0xed, 0x7a, 0xaf, 0x1e, 0x18, 0x6e, 0x40, 0x7f, 0x9c, 0x34, 0x15, 0x46,
++      0xe2, 0x03, 0xe3, 0xf0, 0xa7, 0x77, 0x23, 0xfc, 0xbd, 0xc7, 0x71, 0x60,
++      0x0c, 0x9f, 0x1a, 0xa4, 0xbe, 0x19, 0x1e, 0x42, 0x7f, 0x0d, 0x7b, 0x07,
++      0xe1, 0x47, 0x6f, 0x06, 0xeb, 0x7b, 0xcf, 0x02, 0x1f, 0x3c, 0x87, 0x73,
++      0x07, 0x0f, 0x73, 0x7c, 0x36, 0xe6, 0x3f, 0xd7, 0x73, 0x1f, 0x72, 0x7d,
++      0xf5, 0xd4, 0xe7, 0xc7, 0xb8, 0xef, 0x8a, 0x04, 0xf7, 0xf9, 0x0c, 0xaf,
++      0xf7, 0x71, 0x1f, 0xb9, 0xcd, 0x7d, 0xb2, 0x37, 0xa7, 0x4f, 0x4e, 0xa1,
++      0x6e, 0x8e, 0x65, 0x52, 0x6a, 0x43, 0xd6, 0xaf, 0x42, 0xdd, 0x1f, 0x15,
++      0x06, 0xe2, 0x65, 0x9c, 0xaf, 0x92, 0x35, 0xc0, 0x91, 0x35, 0xe8, 0x6b,
++      0xbd, 0x87, 0x38, 0x2e, 0x2d, 0x94, 0x9f, 0x95, 0x33, 0xe3, 0x9a, 0x0f,
++      0x34, 0x3f, 0x3d, 0xd4, 0xbc, 0x43, 0xfd, 0xca, 0x58, 0xf5, 0x76, 0x8a,
++      0xec, 0xab, 0x1a, 0xcb, 0x90, 0x7c, 0xa5, 0x28, 0x26, 0x7e, 0x55, 0x84,
++      0x67, 0x60, 0x6f, 0x7c, 0x94, 0xfd, 0xec, 0x7f, 0x06, 0x78, 0x88, 0xf3,
++      0xac, 0xf3, 0x77, 0x75, 0x9d, 0x49, 0xe7, 0x26, 0x07, 0x60, 0xb7, 0xe6,
++      0x7d, 0xee, 0x9c, 0xa7, 0xf3, 0x5e, 0xd1, 0x4c, 0x6b, 0xd1, 0x73, 0x50,
++      0xdd, 0x13, 0x92, 0xf9, 0x52, 0x76, 0xc9, 0x58, 0x70, 0x7f, 0x74, 0xf2,
++      0x41, 0xf1, 0x45, 0xf3, 0xd2, 0xce, 0x23, 0x3b, 0x4f, 0x9c, 0xfc, 0x08,
++      0x53, 0x3d, 0x97, 0x8f, 0x97, 0xfa, 0xa7, 0x37, 0x3e, 0x3a, 0xfc, 0xff,
++      0xf1, 0x3a, 0x85, 0x78, 0xc5, 0xd9, 0x6e, 0x33, 0x41, 0x73, 0xd6, 0x13,
++      0x62, 0x88, 0xf3, 0x35, 0x55, 0xcf, 0xef, 0xb5, 0x06, 0xf9, 0xea, 0x7f,
++      0x1a, 0xf6, 0xf4, 0xf3, 0x3b, 0xf9, 0x83, 0xfb, 0x39, 0xf2, 0xec, 0x33,
++      0xbb, 0xc7, 0x39, 0xaf, 0xcc, 0xb7, 0x7d, 0x1c, 0x87, 0xdb, 0x88, 0x83,
++      0xa9, 0xe3, 0x90, 0xb0, 0xe2, 0xa0, 0xeb, 0x83, 0x5d, 0x4f, 0x91, 0xe4,
++      0x0b, 0xd5, 0x19, 0xf3, 0x2a, 0xcd, 0x27, 0x1e, 0xf6, 0x5b, 0xca, 0x35,
++      0x2b, 0xff, 0xc2, 0xec, 0x5f, 0x48, 0xec, 0x5d, 0x69, 0x3f, 0x17, 0xe4,
++      0x73, 0x01, 0x79, 0x0e, 0xfb, 0x78, 0x8f, 0xe6, 0x3c, 0xf1, 0x55, 0x71,
++      0xd4, 0x7a, 0x73, 0xdf, 0x9d, 0x3d, 0x9e, 0x54, 0x51, 0xe9, 0x07, 0x75,
++      0x46, 0xe6, 0x8d, 0xea, 0x91, 0x69, 0xd5, 0x99, 0xbb, 0x54, 0x7f, 0x03,
++      0xa7, 0xfb, 0x50, 0x17, 0x4e, 0xf7, 0x9d, 0xe1, 0xfe, 0xc7, 0x71, 0x69,
++      0xa7, 0xb9, 0x58, 0xc6, 0xae, 0xc6, 0x59, 0x67, 0x9c, 0x76, 0x54, 0xd9,
++      0xec, 0xd0, 0xf7, 0xce, 0xd7, 0x97, 0x31, 0xaf, 0x6d, 0xa2, 0xbe, 0xec,
++      0xb7, 0xe6, 0x49, 0x67, 0xbd, 0xf7, 0x3f, 0x72, 0xbd, 0xdf, 0xde, 0x6c,
++      0xd7, 0x5f, 0x2b, 0x26, 0xd2, 0xd0, 0xdf, 0xce, 0xfd, 0x72, 0x17, 0xbf,
++      0xdb, 0xeb, 0x81, 0x08, 0xdd, 0xd7, 0xf5, 0x32, 0xf9, 0x27, 0x4a, 0x83,
++      0xf0, 0xa7, 0x6b, 0x2b, 0xbe, 0x77, 0x85, 0xb0, 0x5f, 0x19, 0xc2, 0xdf,
++      0x5b, 0xed, 0x3e, 0x93, 0xe4, 0x2b, 0x43, 0xc0, 0x52, 0x7e, 0xef, 0x13,
++      0xd6, 0x5c, 0x0c, 0x3c, 0xe9, 0xb5, 0xcf, 0x8f, 0x6e, 0x71, 0xc1, 0x8b,
++      0xf7, 0x2f, 0x1a, 0x30, 0x07, 0xb6, 0xd6, 0x99, 0xf4, 0xbd, 0xa3, 0x01,
++      0xfd, 0x12, 0xf5, 0x75, 0xf6, 0xef, 0x33, 0x9e, 0x2b, 0x2b, 0x67, 0xe7,
++      0x67, 0xfb, 0x7c, 0x5d, 0x18, 0x1f, 0xb5, 0xe6, 0x5c, 0x7d, 0x9f, 0xfd,
++      0xfd, 0x28, 0xbd, 0xb4, 0x94, 0x73, 0xaa, 0x7d, 0xbe, 0x76, 0xe9, 0x79,
++      0x87, 0xe7, 0xd1, 0x62, 0x71, 0x29, 0x0d, 0xbf, 0x26, 0xd2, 0xf9, 0xde,
++      0xa1, 0xba, 0x4f, 0xeb, 0x83, 0xdd, 0xda, 0x8f, 0x59, 0xfd, 0xb8, 0x7f,
++      0x0f, 0xdb, 0xf9, 0x1b, 0xfd, 0x5d, 0x5c, 0xca, 0xfe, 0x28, 0xbd, 0xd8,
++      0xdf, 0xcc, 0xf3, 0x7e, 0xd2, 0x5a, 0x3b, 0xe7, 0xf4, 0x76, 0xb2, 0xab,
++      0x88, 0xfb, 0x69, 0xa9, 0xad, 0xdf, 0x43, 0xbe, 0xa4, 0x09, 0x38, 0xd2,
++      0xa4, 0xf3, 0xa0, 0xf3, 0xa5, 0xf3, 0x83, 0x3c, 0x96, 0xae, 0x26, 0xb1,
++      0x96, 0xae, 0xd5, 0xf4, 0x60, 0x9b, 0xba, 0x66, 0x9c, 0xff, 0x3f, 0xd8,
++      0x1e, 0x53, 0xf2, 0x6f, 0x8a, 0xef, 0x63, 0x68, 0x80, 0x3f, 0x31, 0xce,
++      0xce, 0xc5, 0x9c, 0x00, 0x6b, 0x1e, 0xc1, 0x7d, 0x17, 0x3c, 0xbc, 0xdd,
++      0xac, 0xe7, 0x46, 0x67, 0xff, 0xfe, 0x90, 0xea, 0xf2, 0xd9, 0x7f, 0x73,
++      0xe7, 0xce, 0xd9, 0xf9, 0x51, 0xfb, 0xa9, 0xe4, 0x1b, 0x99, 0x8f, 0x7e,
++      0xd1, 0xba, 0x09, 0x7f, 0x6f, 0x87, 0x7d, 0xe0, 0x7d, 0xd8, 0x67, 0xcf,
++      0x97, 0xe4, 0x45, 0x21, 0x3d, 0xf0, 0xc5, 0x45, 0x85, 0xe4, 0xcf, 0xf1,
++      0xcb, 0xdf, 0xd1, 0xe7, 0x8f, 0x46, 0x83, 0xd8, 0x2f, 0x6b, 0x85, 0x7a,
++      0x37, 0xf1, 0xd6, 0x25, 0x8e, 0x82, 0xd7, 0x1f, 0x8c, 0x00, 0xdf, 0x17,
++      0x2f, 0x41, 0x4f, 0xd1, 0x11, 0xea, 0x73, 0xfe, 0x32, 0x84, 0x35, 0x35,
++      0xca, 0x7c, 0x2d, 0x37, 0xe8, 0xff, 0x65, 0x59, 0x11, 0xe2, 0xff, 0xab,
++      0xf0, 0xbb, 0x03, 0x4f, 0xdd, 0xb6, 0x7c, 0x2f, 0xc4, 0x5b, 0xaa, 0x1f,
++      0x92, 0x97, 0x38, 0xce, 0xfc, 0xf5, 0xe7, 0xf2, 0x57, 0xc7, 0xa5, 0xdc,
++      0xc8, 0xcb, 0xd7, 0xb5, 0x4e, 0xbe, 0x7a, 0x99, 0xaf, 0xf7, 0xad, 0xfe,
++      0x36, 0x57, 0x2f, 0xfe, 0xae, 0xb8, 0xf4, 0xd8, 0xf8, 0x0b, 0xdc, 0x5c,
++      0xab, 0xee, 0x2f, 0x9b, 0x33, 0x77, 0x56, 0x0b, 0x7b, 0x3d, 0x3a, 0x24,
++      0xf3, 0xfd, 0x1f, 0xfe, 0xac, 0x5e, 0x92, 0x80, 0x14, 0x00, 0x00, 0x00 };
+ static u8 bnx2_TPAT_b06FwText[] = {
+-      0xbd, 0x58, 0x6d, 0x70, 0x5c, 0xd5, 0x79, 0x7e, 0xce, 0xbd, 0x77, 0xb5,
+-      0xd7, 0xd2, 0x4a, 0xba, 0xb2, 0xd6, 0x66, 0x5d, 0xdc, 0xfa, 0x1e, 0x74,
+-      0x57, 0x52, 0x58, 0x01, 0x77, 0x6d, 0x01, 0xeb, 0xe6, 0xb6, 0xbe, 0xc8,
+-      0xb2, 0xbc, 0xfe, 0x00, 0xe4, 0xc0, 0x4c, 0xe4, 0x96, 0x8e, 0x37, 0xc6,
+-      0x18, 0xd9, 0x90, 0xa9, 0x28, 0xfc, 0x58, 0x37, 0x4c, 0xbd, 0x95, 0x65,
+-      0x63, 0xc3, 0x4a, 0x6b, 0x0c, 0xb1, 0x4c, 0xda, 0x99, 0x78, 0x84, 0xb1,
+-      0x4c, 0x22, 0x7b, 0x0d, 0xe4, 0x07, 0x49, 0xc3, 0xa0, 0xc1, 0x0e, 0x08,
+-      0x06, 0xf3, 0x31, 0x6d, 0x67, 0x98, 0xe9, 0xa4, 0xf5, 0x18, 0xf3, 0x11,
+-      0x92, 0x18, 0x87, 0x4e, 0x3a, 0xa2, 0x10, 0x9f, 0x3e, 0x67, 0x77, 0xc5,
+-      0x57, 0x32, 0xd3, 0xfe, 0xaa, 0x66, 0x56, 0x7b, 0xf7, 0xec, 0xf9, 0x78,
+-      0xcf, 0xfb, 0x3e, 0xef, 0xf3, 0x3e, 0xef, 0x5e, 0x21, 0x50, 0x8f, 0xda,
+-      0x5f, 0x23, 0x5f, 0xdd, 0xdf, 0x1a, 0xba, 0x2f, 0x7d, 0xf5, 0x75, 0x57,
+-      0xf3, 0xf1, 0x3a, 0xe1, 0xd4, 0x59, 0xf8, 0x7f, 0xfc, 0x33, 0x01, 0x67,
+-      0xce, 0x0e, 0xfd, 0x82, 0x6d, 0x04, 0x85, 0xcb, 0x7b, 0x3c, 0xd8, 0x66,
+-      0x10, 0x77, 0x6f, 0xf7, 0x80, 0x70, 0x2a, 0xe5, 0xae, 0xc4, 0xef, 0x54,
+-      0x21, 0x6e, 0x41, 0x8f, 0xff, 0x71, 0xf0, 0xe9, 0x35, 0xcf, 0x5d, 0x2f,
+-      0x2f, 0x1e, 0x36, 0x61, 0x3b, 0xc1, 0x5e, 0xcb, 0x69, 0x87, 0xbd, 0x98,
+-      0x6b, 0xfe, 0xb1, 0xe3, 0x2f, 0x04, 0x9a, 0xe6, 0xf6, 0x52, 0x6a, 0xc4,
+-      0x8f, 0x62, 0xd8, 0x4f, 0x60, 0x77, 0xc9, 0x40, 0xe8, 0x44, 0xb1, 0xcb,
+-      0x9b, 0x55, 0x5b, 0x7c, 0xe9, 0xef, 0x86, 0x5a, 0x72, 0xda, 0x97, 0x89,
+-      0x5e, 0x13, 0xe1, 0x77, 0xbc, 0xc5, 0xd8, 0x5d, 0x4e, 0x60, 0xa4, 0x6c,
+-      0xe3, 0xac, 0x39, 0x82, 0xde, 0xf2, 0xdc, 0x3a, 0x97, 0xeb, 0x3a, 0xb1,
+-      0xe7, 0xcb, 0x6b, 0xdd, 0xdd, 0x48, 0x25, 0xf6, 0xc0, 0x40, 0x2e, 0xee,
+-      0x71, 0x5d, 0x9b, 0xbb, 0x07, 0xb2, 0x93, 0xfb, 0x14, 0xea, 0xba, 0x5d,
+-      0xee, 0x51, 0xe0, 0x7a, 0xe9, 0x1e, 0x85, 0xde, 0x2b, 0xc3, 0xcf, 0x6f,
+-      0xa9, 0xe7, 0x3a, 0x16, 0xe3, 0x19, 0xee, 0xff, 0x74, 0xd9, 0xc1, 0xc9,
+-      0xb2, 0x87, 0xe7, 0xcb, 0x2e, 0x7e, 0x54, 0x8e, 0xe3, 0xa9, 0xb2, 0x9d,
+-      0xb3, 0x03, 0xf4, 0xc7, 0x47, 0x77, 0xaa, 0x84, 0x87, 0xc2, 0x1f, 0x05,
+-      0xde, 0xa1, 0x43, 0x46, 0x2c, 0xf3, 0x37, 0xd7, 0xa1, 0x7f, 0xfe, 0x71,
+-      0x1b, 0x1b, 0x4a, 0x8b, 0x73, 0xd1, 0x00, 0x9c, 0x23, 0xe0, 0x5f, 0x67,
+-      0xa3, 0x9f, 0x7b, 0x14, 0xb8, 0x7f, 0x58, 0x1e, 0xe1, 0xcb, 0xc6, 0xbb,
+-      0x45, 0xdb, 0x6e, 0x1e, 0x5d, 0xa8, 0xe7, 0xe0, 0x57, 0xc5, 0x8b, 0xea,
+-      0x42, 0xda, 0xc1, 0x2b, 0xcb, 0x95, 0x6a, 0x0c, 0x50, 0x68, 0xe8, 0x2e,
+-      0xc0, 0x0c, 0x64, 0x76, 0x9d, 0x29, 0xd0, 0x7b, 0x95, 0xd7, 0x39, 0x2a,
+-      0x6e, 0xb9, 0xc5, 0x08, 0x60, 0x8b, 0xc0, 0xb5, 0xda, 0xa6, 0x32, 0xd8,
+-      0x57, 0xe6, 0xbd, 0x68, 0xcf, 0x48, 0x19, 0xe1, 0x5f, 0x76, 0x98, 0x98,
+-      0x88, 0xe3, 0xfe, 0xb7, 0xbb, 0x2d, 0x7c, 0x5c, 0x94, 0x89, 0x4e, 0xf3,
+-      0x7e, 0xec, 0x2c, 0xe6, 0x71, 0x47, 0x11, 0x05, 0x23, 0x18, 0xc2, 0x37,
+-      0xba, 0x03, 0xde, 0x33, 0xc4, 0xf7, 0xcb, 0xb0, 0x5b, 0x83, 0xd3, 0x97,
+-      0xdf, 0xdb, 0x2e, 0x0f, 0x87, 0x06, 0x90, 0x1d, 0x03, 0xfa, 0x4a, 0x02,
+-      0xa7, 0x32, 0x02, 0x5b, 0xfc, 0xcb, 0x50, 0x70, 0xba, 0xb1, 0xb7, 0x2c,
+-      0xb3, 0x05, 0x7e, 0x77, 0xd5, 0x28, 0xec, 0x45, 0xc1, 0x6d, 0xd6, 0xf2,
+-      0x12, 0xec, 0x96, 0x60, 0xc0, 0x4a, 0x8f, 0xb5, 0xcd, 0x1e, 0x13, 0x32,
+-      0xbf, 0xc2, 0x94, 0x21, 0x20, 0x33, 0x9d, 0x46, 0xaa, 0xa0, 0x84, 0x1c,
+-      0xba, 0x08, 0x6d, 0xd3, 0x6d, 0xd6, 0x35, 0x53, 0xfa, 0x7d, 0xc0, 0xba,
+-      0x7a, 0x0a, 0x58, 0xcf, 0x3d, 0x1f, 0x5a, 0x2e, 0xb0, 0x3d, 0xfd, 0x6b,
+-      0x15, 0x2e, 0x90, 0xe1, 0x61, 0xd1, 0x8d, 0xd1, 0x32, 0x70, 0xd3, 0x18,
+-      0xec, 0x18, 0xe7, 0x16, 0xb9, 0x77, 0x3d, 0xe7, 0xae, 0x1d, 0x6d, 0x1b,
+-      0x9c, 0x11, 0x92, 0x77, 0x93, 0x03, 0x40, 0xca, 0x3f, 0x0e, 0xe9, 0xae,
+-      0x13, 0xd2, 0xd9, 0x53, 0xdb, 0x33, 0x59, 0xdb, 0xf3, 0x8a, 0x29, 0x5b,
+-      0xac, 0x2a, 0x41, 0xf4, 0x96, 0xe0, 0x3e, 0xe9, 0x83, 0x77, 0x89, 0xf1,
+-      0xde, 0xf5, 0x70, 0x5b, 0xa4, 0x7f, 0x98, 0x73, 0xa3, 0x41, 0x97, 0xf5,
+-      0x5e, 0x51, 0xe0, 0x43, 0x4f, 0xcf, 0xef, 0xd2, 0xb6, 0x84, 0x4e, 0x90,
+-      0x11, 0xfd, 0xe5, 0xfd, 0x73, 0x39, 0x62, 0x9c, 0xf4, 0xe3, 0xc0, 0x42,
+-      0x34, 0xb7, 0x78, 0xf3, 0xf1, 0xb0, 0x83, 0xc6, 0xa8, 0xb7, 0xcc, 0x78,
+-      0xc0, 0xa9, 0xc3, 0x49, 0xff, 0xb7, 0x0a, 0xdf, 0xd0, 0xf3, 0x81, 0x6f,
+-      0x3f, 0xe2, 0x20, 0xe6, 0x5d, 0xc4, 0xd1, 0xf4, 0x36, 0xe3, 0x55, 0x67,
+-      0x08, 0x4d, 0xde, 0xcf, 0x8d, 0xd7, 0x9c, 0x38, 0x1e, 0xe2, 0x7d, 0xee,
+-      0x4c, 0xc6, 0xf1, 0x40, 0xf9, 0xab, 0xfb, 0x5a, 0x22, 0x3b, 0xfe, 0x8e,
+-      0x42, 0x4b, 0x65, 0x7d, 0xf8, 0xac, 0x3f, 0x01, 0x5c, 0xa6, 0xc7, 0xf3,
+-      0x62, 0x63, 0xe9, 0x92, 0x72, 0xa3, 0x19, 0x3c, 0x50, 0xb2, 0x31, 0x8f,
+-      0x76, 0x45, 0x3c, 0x1b, 0x6f, 0x17, 0xf3, 0x62, 0x55, 0x39, 0x14, 0x6b,
+-      0x26, 0x7b, 0x44, 0x38, 0x69, 0x89, 0x9e, 0x71, 0x10, 0x9b, 0x4a, 0xad,
+-      0xf1, 0x05, 0xfe, 0xc3, 0xff, 0x57, 0xe3, 0x6c, 0xab, 0x0c, 0x5d, 0x71,
+-      0x49, 0x79, 0x49, 0x03, 0xf5, 0x5e, 0x9f, 0x58, 0x3b, 0xa9, 0xd4, 0x5e,
+-      0x3f, 0x2b, 0x7a, 0x27, 0x61, 0x37, 0x04, 0x81, 0x75, 0xd7, 0xe8, 0x69,
+-      0x23, 0xb7, 0x20, 0x86, 0x52, 0xc9, 0xc5, 0x29, 0x5f, 0xe3, 0x77, 0x1e,
+-      0x2c, 0x4f, 0xf0, 0x85, 0xd8, 0x19, 0x1f, 0x56, 0x8c, 0xcf, 0x53, 0x1b,
+-      0x2c, 0x8c, 0x74, 0xaf, 0xad, 0xac, 0x89, 0x10, 0x2b, 0x4f, 0x14, 0xb3,
+-      0x30, 0x88, 0xbf, 0x45, 0x41, 0x72, 0x76, 0x82, 0x98, 0x7f, 0xcb, 0x4f,
+-      0x76, 0x7e, 0x6c, 0x92, 0x1c, 0x5a, 0x65, 0x82, 0x86, 0x0a, 0x2b, 0x48,
+-      0x76, 0x1e, 0x81, 0x80, 0xe9, 0x59, 0x78, 0xc5, 0x8f, 0x20, 0xdc, 0x60,
+-      0x63, 0x17, 0x71, 0x55, 0xc7, 0xf1, 0xa3, 0x95, 0x71, 0xfd, 0x19, 0xce,
+-      0xaa, 0xf2, 0x57, 0x73, 0x9e, 0xe3, 0xa5, 0x36, 0xe4, 0x2a, 0x79, 0x0f,
+-      0x67, 0x1d, 0xef, 0xfb, 0xad, 0x88, 0x7e, 0xfc, 0x93, 0xcf, 0xc6, 0x6e,
+-      0xa4, 0x9d, 0x66, 0xe0, 0xe5, 0x1e, 0x17, 0x8b, 0x50, 0x68, 0x01, 0xed,
+-      0x36, 0x70, 0x21, 0xbd, 0x10, 0xd3, 0x2d, 0xfa, 0xeb, 0xb8, 0xd3, 0x3f,
+-      0xde, 0xaa, 0x63, 0xa2, 0xf7, 0x72, 0x56, 0x8d, 0x2b, 0xf5, 0xbc, 0x5f,
+-      0x87, 0xd9, 0x8e, 0xe1, 0x19, 0x66, 0x89, 0xbf, 0x88, 0x39, 0xf9, 0x12,
+-      0xcf, 0x6f, 0x59, 0x66, 0xc2, 0x5c, 0xe6, 0x9a, 0xee, 0x7c, 0x60, 0xa2,
+-      0xa8, 0x39, 0x41, 0xce, 0xbe, 0xc4, 0xff, 0xe7, 0xca, 0x1a, 0x9f, 0x3e,
+-      0xf1, 0x29, 0xd0, 0xde, 0xa1, 0xe3, 0xee, 0x5b, 0xed, 0xc4, 0xde, 0x76,
+-      0xfa, 0x33, 0xc2, 0x3c, 0x78, 0x90, 0xf6, 0x9e, 0x2b, 0x7e, 0xcf, 0x58,
+-      0xe5, 0x48, 0x57, 0x9f, 0xf0, 0x4e, 0x11, 0xe2, 0x79, 0xff, 0xef, 0xb4,
+-      0x8f, 0x5d, 0x6e, 0x4b, 0xcc, 0xdc, 0x47, 0xcc, 0x68, 0xee, 0x59, 0x6f,
+-      0x39, 0x63, 0x72, 0xe0, 0x7d, 0x1a, 0x91, 0x08, 0x86, 0xac, 0x44, 0x29,
+-      0xb5, 0x77, 0x90, 0xdf, 0xdb, 0x41, 0xd6, 0xb2, 0x47, 0x65, 0x9e, 0xe7,
+-      0xe5, 0x2c, 0x43, 0x26, 0x9a, 0xcd, 0xd4, 0xd0, 0x88, 0x90, 0x83, 0xcd,
+-      0x42, 0xf6, 0xdf, 0x03, 0xe9, 0x9c, 0x10, 0xfa, 0xcc, 0xf5, 0x56, 0x57,
+-      0x05, 0xa3, 0x59, 0x62, 0x54, 0xbf, 0xdf, 0x67, 0xa5, 0x2a, 0xef, 0x43,
+-      0xd6, 0x95, 0x53, 0x09, 0x8c, 0x96, 0xa4, 0xef, 0x8a, 0x28, 0xbe, 0x96,
+-      0xb6, 0x71, 0x22, 0xa9, 0x96, 0xbc, 0x90, 0x96, 0xb9, 0x1e, 0x73, 0x31,
+-      0x73, 0x21, 0x81, 0x61, 0x62, 0xe9, 0x1f, 0x92, 0x23, 0xe8, 0x29, 0x9b,
+-      0xc4, 0xb1, 0x8b, 0xfd, 0xa5, 0x28, 0x66, 0xc8, 0x4f, 0x75, 0xe9, 0x4e,
+-      0x8c, 0x94, 0x64, 0xe7, 0x1b, 0x48, 0xe5, 0x8f, 0x30, 0x5e, 0x67, 0x17,
+-      0x78, 0xd8, 0x5f, 0x6e, 0x63, 0x8c, 0xa4, 0xbb, 0x8a, 0x1c, 0x65, 0x76,
+-      0x4b, 0x67, 0x17, 0x7d, 0x5b, 0x17, 0x90, 0xdb, 0xca, 0x19, 0xee, 0x53,
+-      0xc0, 0xaa, 0x72, 0x5e, 0xf4, 0x95, 0xe7, 0x70, 0xfa, 0x73, 0x62, 0x53,
+-      0x63, 0xd5, 0xc6, 0xe6, 0x12, 0x70, 0x67, 0xc9, 0x47, 0x8b, 0x67, 0xbc,
+-      0x18, 0xc5, 0x45, 0xfa, 0x71, 0x02, 0xf7, 0x38, 0x21, 0x16, 0x79, 0xeb,
+-      0xd4, 0x8e, 0xb8, 0x9e, 0x9f, 0x17, 0x6b, 0x19, 0xb7, 0x30, 0x02, 0x63,
+-      0xd2, 0x37, 0x71, 0x36, 0x3e, 0x3c, 0x3f, 0x52, 0xe1, 0x5d, 0xfd, 0x6e,
+-      0xa2, 0xdf, 0xc7, 0x1a, 0x07, 0x72, 0xc8, 0x17, 0x85, 0xc1, 0x26, 0xfa,
+-      0xe1, 0xa4, 0x28, 0x0c, 0xc4, 0x20, 0x0b, 0xf7, 0x0a, 0x3a, 0x6b, 0x8c,
+-      0x24, 0xb1, 0x60, 0x8e, 0xa7, 0x2d, 0xfc, 0x75, 0xe9, 0x29, 0xe3, 0x5c,
+-      0xa4, 0x0e, 0xe6, 0x81, 0x08, 0xa2, 0x07, 0x2c, 0x34, 0x1f, 0x10, 0xc4,
+-      0x5d, 0xa1, 0x33, 0xaa, 0xd7, 0x21, 0x81, 0x7d, 0xa3, 0x36, 0xee, 0xe9,
+-      0x88, 0xe0, 0x42, 0x52, 0x0e, 0x5e, 0x21, 0x86, 0xfd, 0x26, 0x8e, 0x8d,
+-      0x1e, 0x97, 0xae, 0x6b, 0x14, 0x22, 0x68, 0x8a, 0x23, 0xd2, 0x5e, 0x87,
+-      0x06, 0xae, 0xdb, 0x59, 0x52, 0x3b, 0xed, 0xa0, 0xe0, 0x36, 0x40, 0xfa,
+-      0x0f, 0x73, 0xdf, 0x53, 0x45, 0xa5, 0xea, 0xaf, 0xf5, 0x66, 0x3e, 0x30,
+-      0xe5, 0xf4, 0x0e, 0x7e, 0x7e, 0x6b, 0xaa, 0xba, 0xff, 0xbc, 0x03, 0x36,
+-      0x1a, 0x0f, 0x56, 0xf6, 0x9f, 0x7d, 0x8a, 0x16, 0x7c, 0x58, 0xd2, 0xf9,
+-      0xa4, 0x54, 0x34, 0xf0, 0xfa, 0xdf, 0x13, 0x4a, 0xdd, 0xe4, 0xcb, 0xdc,
+-      0xcb, 0xa2, 0x6d, 0x60, 0x94, 0xcf, 0x83, 0xe9, 0xa4, 0x9b, 0xa5, 0xcd,
+-      0xe7, 0xcb, 0x51, 0xda, 0xc7, 0x5c, 0xf0, 0xb6, 0x19, 0x3b, 0x1c, 0x13,
+-      0x75, 0xde, 0x0e, 0x63, 0x6b, 0x05, 0xab, 0x0e, 0x16, 0x8d, 0xd5, 0x63,
+-      0x89, 0x17, 0x8a, 0x4d, 0xcc, 0xcd, 0x8d, 0x93, 0x16, 0xe7, 0xe9, 0xdc,
+-      0x14, 0x88, 0x7a, 0xbd, 0x62, 0xe5, 0x64, 0x5f, 0x25, 0x5f, 0x07, 0xc6,
+-      0x0d, 0xbc, 0xe9, 0xdf, 0x80, 0x48, 0x90, 0x15, 0x03, 0x93, 0x3a, 0x7f,
+-      0xd6, 0x8a, 0xd5, 0x93, 0x8c, 0xdf, 0x7c, 0x9d, 0x3b, 0x37, 0x88, 0x48,
+-      0xa0, 0xf3, 0xe5, 0xf3, 0x1c, 0xb2, 0x99, 0x43, 0xc7, 0xfe, 0x97, 0x1c,
+-      0x7a, 0xa8, 0x64, 0x21, 0xd7, 0x52, 0xcd, 0x97, 0x5e, 0xc6, 0xe2, 0xef,
+-      0x6b, 0x75, 0x7b, 0x3b, 0xc7, 0xa3, 0x07, 0x74, 0x0e, 0xf7, 0x32, 0x87,
+-      0x35, 0x9e, 0x2d, 0xb1, 0x69, 0x1c, 0x76, 0x73, 0x10, 0x5a, 0x1f, 0x8e,
+-      0x2a, 0xbc, 0xed, 0x2b, 0xf5, 0xf1, 0x32, 0xed, 0x13, 0x39, 0xf8, 0x2c,
+-      0xf1, 0x08, 0x12, 0xd2, 0xbb, 0x9e, 0x52, 0x33, 0x7e, 0x2a, 0xfb, 0x2c,
+-      0x79, 0xf9, 0x9c, 0xd0, 0xf7, 0x8f, 0xc2, 0x49, 0x6b, 0x3c, 0xf6, 0x5a,
+-      0x57, 0x55, 0x70, 0x19, 0x12, 0xaf, 0xac, 0xd5, 0xf3, 0x35, 0x36, 0xa3,
+-      0x68, 0x48, 0xce, 0xd2, 0x37, 0x72, 0xa8, 0x51, 0xa8, 0x25, 0xaf, 0xa6,
+-      0xab, 0xb8, 0x2c, 0xb2, 0x36, 0xad, 0xe7, 0x59, 0xbd, 0xe3, 0xb2, 0xb0,
+-      0xde, 0xac, 0xd6, 0xd1, 0xbd, 0xc4, 0x86, 0xe6, 0xb8, 0xcb, 0xdb, 0xa3,
+-      0xd8, 0x47, 0x8c, 0x7a, 0x69, 0x17, 0xc3, 0xac, 0xab, 0xbb, 0x4b, 0xd2,
+-      0x1d, 0x26, 0x4e, 0x77, 0xd7, 0x70, 0x3a, 0xcc, 0x5a, 0xba, 0x1b, 0x72,
+-      0xaf, 0xae, 0xa5, 0x11, 0xe2, 0x94, 0x34, 0x56, 0xc1, 0xe9, 0x48, 0x0d,
+-      0xa7, 0xbd, 0x15, 0x9c, 0xee, 0x36, 0x34, 0x3e, 0x35, 0xf6, 0x36, 0xf1,
+-      0xbe, 0x67, 0xa3, 0x30, 0x7e, 0xc0, 0xfd, 0xc3, 0x05, 0xc3, 0x3d, 0x35,
+-      0xec, 0xf5, 0x68, 0xec, 0x19, 0x69, 0xdc, 0x63, 0xf0, 0x6e, 0x2f, 0x88,
+-      0x42, 0xae, 0x11, 0x32, 0x3b, 0x2c, 0x0a, 0x9d, 0xf3, 0x88, 0xbd, 0x67,
+-      0x38, 0xa3, 0x81, 0xd8, 0xab, 0xfa, 0x4c, 0xcf, 0x8f, 0x11, 0x7b, 0xff,
+-      0x29, 0xce, 0x46, 0x34, 0xd7, 0xea, 0xd8, 0x02, 0x8b, 0x4e, 0x68, 0xae,
+-      0x8d, 0x92, 0x30, 0x2c, 0xe4, 0x4b, 0xc6, 0xe2, 0x04, 0x14, 0xb6, 0x92,
+-      0xdb, 0xde, 0xf4, 0x76, 0xf9, 0x2d, 0xb8, 0x01, 0xa7, 0xbb, 0x0c, 0x68,
+-      0x1d, 0x62, 0x4e, 0x54, 0xb1, 0x7b, 0x17, 0x39, 0xa3, 0x29, 0x90, 0x9d,
+-      0x67, 0xa9, 0x37, 0xb6, 0xa4, 0x1b, 0x50, 0xf2, 0x86, 0xc3, 0x66, 0x56,
+-      0x43, 0x9b, 0xe7, 0xae, 0x86, 0xae, 0x85, 0x71, 0x58, 0xed, 0x36, 0x1a,
+-      0x8e, 0x7a, 0xb9, 0x13, 0x42, 0xe3, 0x15, 0xe8, 0x3a, 0x6e, 0xd3, 0x7e,
+-      0x38, 0xf5, 0x81, 0x97, 0xf9, 0xc0, 0x7c, 0x5c, 0x9c, 0x75, 0xaa, 0xf5,
+-      0xa0, 0x6f, 0x5c, 0x63, 0xec, 0x57, 0xea, 0x4d, 0xcf, 0xc0, 0x1d, 0xdd,
+-      0x4a, 0x79, 0x4b, 0xa3, 0x88, 0x4c, 0xd8, 0xa8, 0x3b, 0xd8, 0x8a, 0x97,
+-      0xba, 0x22, 0x38, 0x7b, 0xab, 0xfe, 0x3e, 0x8a, 0x7a, 0xe2, 0x70, 0xd3,
+-      0xb5, 0x51, 0x2c, 0x99, 0xa8, 0x62, 0xb2, 0xc1, 0xfb, 0x89, 0xb8, 0x8b,
+-      0x98, 0x9c, 0xe7, 0x9d, 0x11, 0xdb, 0x9c, 0x0c, 0xf6, 0xd2, 0xa6, 0xd7,
+-      0xc9, 0xf1, 0xe7, 0x93, 0xbb, 0x66, 0x2c, 0xda, 0xbf, 0x62, 0x59, 0xa1,
+-      0x73, 0x09, 0x22, 0x58, 0x34, 0x21, 0x07, 0x8e, 0xe9, 0x0a, 0x33, 0x6a,
+-      0x89, 0x0d, 0xc4, 0xbb, 0xe6, 0x57, 0x93, 0x71, 0xba, 0x62, 0x69, 0xdb,
+-      0xd0, 0xcd, 0xb8, 0xa4, 0xce, 0x24, 0x93, 0xd9, 0x51, 0x62, 0x7d, 0xdb,
+-      0xf1, 0x08, 0xea, 0x0e, 0xfc, 0x97, 0x32, 0x02, 0xe6, 0x42, 0xb7, 0x22,
+-      0x3e, 0x0b, 0x99, 0x7a, 0x72, 0xc8, 0x45, 0xc4, 0xf1, 0xd8, 0xfe, 0x9d,
+-      0x6a, 0x09, 0xc7, 0xdf, 0xbb, 0xbe, 0x19, 0x6d, 0xcb, 0x64, 0x7e, 0x2b,
+-      0xf7, 0x9f, 0x4d, 0x17, 0x3a, 0x13, 0x8c, 0xdd, 0x49, 0xb8, 0xb8, 0x6a,
+-      0x4c, 0xe6, 0x8e, 0xa1, 0x0e, 0xcd, 0x13, 0x5e, 0xf6, 0x84, 0x88, 0xa1,
+-      0xf1, 0x44, 0x0c, 0xfb, 0x8e, 0xeb, 0xfc, 0x8c, 0xc1, 0x1a, 0xf3, 0x66,
+-      0x3b, 0x44, 0xa1, 0x9f, 0xf9, 0x39, 0xd3, 0x2f, 0xda, 0xd1, 0x3e, 0x2e,
+-      0xa7, 0xb3, 0xc2, 0x0b, 0x1f, 0x80, 0x87, 0x76, 0xd6, 0x65, 0xfb, 0x84,
+-      0x8b, 0x15, 0xba, 0x7e, 0x94, 0x75, 0xfe, 0xe8, 0x7a, 0x6a, 0xf0, 0x4e,
+-      0xa1, 0x58, 0x5f, 0xa9, 0x79, 0xbd, 0x7c, 0xf5, 0xb1, 0xfe, 0x59, 0x62,
+-      0xdd, 0xb8, 0xce, 0x2d, 0x03, 0x33, 0xfe, 0x25, 0xb5, 0x3d, 0x99, 0x65,
+-      0xad, 0x9b, 0xc7, 0xbc, 0xaa, 0xe6, 0x13, 0x5a, 0x74, 0x6e, 0xcd, 0xab,
+-      0xe5, 0x93, 0x85, 0x33, 0x8c, 0xdd, 0xe1, 0xff, 0x73, 0x5d, 0xb2, 0x90,
+-      0x38, 0x60, 0xa0, 0xa5, 0x23, 0x8a, 0x6b, 0x96, 0xb6, 0x39, 0xcd, 0x88,
+-      0xe2, 0x26, 0xdf, 0x41, 0x13, 0x31, 0xb1, 0x9f, 0x39, 0x85, 0xf9, 0xd5,
+-      0x5c, 0x5b, 0xa9, 0xeb, 0x55, 0x2d, 0xd7, 0xf2, 0xa5, 0x04, 0x6b, 0x93,
+-      0xae, 0x05, 0xbd, 0xac, 0x05, 0x16, 0x0e, 0x95, 0xb5, 0x6f, 0x1d, 0xbc,
+-      0x4b, 0xce, 0x7e, 0xc5, 0xd7, 0xbe, 0x5d, 0x8c, 0x12, 0x73, 0xe3, 0x41,
+-      0xe6, 0xc6, 0xda, 0xf2, 0x25, 0xb5, 0xc6, 0xd3, 0xf5, 0x38, 0x64, 0x3d,
+-      0xb6, 0xc4, 0x4d, 0xe3, 0x72, 0xd0, 0x15, 0xa7, 0xee, 0x24, 0x36, 0x3b,
+-      0x1b, 0x0d, 0xa5, 0x5e, 0x4e, 0xa7, 0x42, 0xea, 0x98, 0xcc, 0xdd, 0x42,
+-      0xba, 0xef, 0x93, 0x9b, 0xd6, 0x9a, 0x51, 0x2c, 0xaf, 0xe5, 0x60, 0xb2,
+-      0x96, 0x83, 0x1e, 0x73, 0xd0, 0x6d, 0x45, 0xf8, 0x09, 0x6d, 0x6c, 0x63,
+-      0x0e, 0x6e, 0xa3, 0x4e, 0xfd, 0x7e, 0xa9, 0xc2, 0xfb, 0x99, 0x15, 0x22,
+-      0x35, 0x73, 0x9e, 0xf9, 0xe4, 0x5e, 0xe6, 0x51, 0xaf, 0xb5, 0x65, 0xce,
+-      0x33, 0x66, 0xab, 0x6b, 0xf9, 0xb4, 0xbb, 0xc6, 0xfb, 0x0f, 0xd4, 0xf2,
+-      0x69, 0xf5, 0x97, 0xf2, 0x49, 0xf3, 0xd3, 0x0b, 0xbf, 0x43, 0xab, 0xd6,
+-      0x22, 0x79, 0xa1, 0xef, 0x97, 0xb3, 0x10, 0xfe, 0xd8, 0xd7, 0x67, 0xd9,
+-      0xb0, 0x82, 0xc6, 0x0a, 0xdf, 0x58, 0x41, 0x28, 0x7a, 0x59, 0x3b, 0x6d,
+-      0x2f, 0x2f, 0xb2, 0xf4, 0x9d, 0x5e, 0xb7, 0x96, 0xb1, 0xd8, 0x99, 0xfe,
+-      0x05, 0xce, 0xb6, 0x2a, 0xd5, 0x97, 0xbe, 0xa4, 0xde, 0x60, 0x5c, 0x62,
+-      0xd4, 0x1f, 0xeb, 0x27, 0xb3, 0xa2, 0x7f, 0x52, 0xfb, 0xa6, 0x11, 0x11,
+-      0x6f, 0xad, 0x58, 0x35, 0x09, 0xdc, 0x43, 0x3d, 0x73, 0x8e, 0x7e, 0x59,
+-      0xe3, 0xcb, 0xa1, 0x35, 0xbc, 0xdb, 0x19, 0xdf, 0xc2, 0xc3, 0xe5, 0xaa,
+-      0x7f, 0xf6, 0x95, 0x65, 0x66, 0x1a, 0x23, 0x58, 0xc3, 0x9a, 0x76, 0x98,
+-      0x7c, 0xf1, 0x6f, 0xc9, 0x28, 0x5e, 0x24, 0x5f, 0xbc, 0xc4, 0xfb, 0x1d,
+-      0xaa, 0xde, 0xcf, 0x9f, 0x45, 0x2a, 0x73, 0x5a, 0xf3, 0x05, 0xb5, 0xf7,
+-      0xa1, 0x72, 0x9b, 0x7f, 0x9a, 0x78, 0x7c, 0xb0, 0x24, 0x07, 0xfa, 0x78,
+-      0x47, 0xbb, 0x5b, 0xce, 0x0e, 0x0a, 0x81, 0x8d, 0x49, 0x38, 0x66, 0xa0,
+-      0xef, 0xe1, 0x52, 0xe3, 0x66, 0xe8, 0x87, 0x02, 0xfa, 0x78, 0xd7, 0x95,
+-      0xac, 0x71, 0x8f, 0x95, 0xbf, 0xa4, 0xeb, 0xb0, 0xad, 0xa4, 0xb9, 0x4a,
+-      0xa9, 0x8e, 0xb4, 0xd6, 0x4a, 0x79, 0x71, 0xb3, 0xe6, 0x94, 0x48, 0x14,
+-      0xca, 0x6f, 0x4b, 0x2c, 0x61, 0xec, 0xf3, 0xc4, 0xd7, 0xbb, 0x5e, 0x3d,
+-      0x79, 0x21, 0x24, 0xaf, 0xf7, 0x90, 0xb7, 0x7b, 0x45, 0x5f, 0x85, 0xcf,
+-      0xb3, 0x22, 0x3b, 0x69, 0x8b, 0x1e, 0x6a, 0x94, 0x0d, 0xcc, 0x33, 0x77,
+-      0xe1, 0x3c, 0x62, 0x4a, 0xe3, 0xca, 0xc0, 0x0f, 0xfc, 0xb5, 0xe4, 0xfc,
+-      0x1b, 0xe8, 0x2b, 0xf2, 0x52, 0x05, 0x8b, 0x37, 0x50, 0x27, 0x55, 0xb1,
+-      0xf8, 0x43, 0x62, 0x31, 0x57, 0xc3, 0x62, 0x24, 0x48, 0x92, 0xef, 0x3e,
+-      0xc7, 0x62, 0xef, 0x1f, 0xe0, 0xf7, 0x2f, 0x62, 0x6e, 0xbd, 0xe6, 0xf7,
+-      0xc8, 0x1c, 0xe6, 0x58, 0x9f, 0x3b, 0x02, 0xf2, 0xb0, 0xc6, 0x9b, 0x8d,
+-      0xbe, 0x47, 0xeb, 0xb1, 0xe1, 0xd1, 0x18, 0x6e, 0x7e, 0x54, 0xa9, 0xd7,
+-      0x7c, 0x78, 0x2d, 0xe4, 0xa2, 0x5f, 0xa4, 0x27, 0x70, 0xa6, 0x25, 0xe9,
+-      0xee, 0x83, 0xee, 0xa3, 0x7a, 0xad, 0xdb, 0x8b, 0x5a, 0xa3, 0x84, 0xd4,
+-      0x28, 0xb2, 0xff, 0x7d, 0xe6, 0xfa, 0xa6, 0xa4, 0xcc, 0xef, 0xac, 0x70,
+-      0x7f, 0xca, 0xa7, 0x16, 0xdf, 0x6b, 0x98, 0x32, 0xdb, 0x6e, 0x54, 0xb1,
+-      0x76, 0x4d, 0x0d, 0x6b, 0x5f, 0x9b, 0xb2, 0xf1, 0x4b, 0xd6, 0x85, 0xcd,
+-      0xe9, 0x28, 0x56, 0xeb, 0x1a, 0xef, 0xe8, 0x5e, 0x2a, 0x8a, 0x7e, 0xc6,
+-      0xc5, 0x58, 0xaa, 0xa8, 0x37, 0xa8, 0x3b, 0x18, 0xcb, 0x55, 0xec, 0xa7,
+-      0xce, 0x50, 0x9f, 0xdc, 0x68, 0x56, 0x7b, 0xa9, 0xd1, 0x9a, 0x3e, 0xb9,
+-      0xb1, 0xac, 0xf3, 0xd1, 0x25, 0x06, 0xa2, 0x38, 0xcd, 0x35, 0x7b, 0xfc,
+-      0xaa, 0x3e, 0x79, 0x1d, 0xa9, 0xac, 0xd6, 0x27, 0x2e, 0x79, 0xbf, 0x54,
+-      0xd1, 0x27, 0x5a, 0x8f, 0x68, 0x2d, 0xa2, 0xfb, 0x85, 0x6e, 0xf6, 0x0b,
+-      0x72, 0x5a, 0xeb, 0x15, 0xa3, 0x5b, 0xfa, 0x86, 0x19, 0x61, 0x8d, 0xcc,
+-      0x30, 0x96, 0x97, 0x61, 0xd7, 0x23, 0x4d, 0x8c, 0x45, 0x23, 0x76, 0x38,
+-      0x2b, 0xac, 0x25, 0x9e, 0xe6, 0x4f, 0x6a, 0x90, 0xdf, 0xd3, 0x2e, 0x47,
+-      0x35, 0xc7, 0x32, 0xfe, 0x73, 0xe3, 0xff, 0x5e, 0x1b, 0xd7, 0xf3, 0xb3,
+-      0xac, 0xd1, 0x7a, 0xcd, 0x8f, 0xac, 0x2a, 0xee, 0xd1, 0xdc, 0xe4, 0xfd,
+-      0x19, 0x2e, 0xd0, 0xc6, 0x37, 0xbf, 0x14, 0x47, 0x9b, 0x79, 0xa1, 0xe3,
+-      0xf8, 0x09, 0xd7, 0xea, 0x78, 0xdb, 0x78, 0x87, 0x3e, 0x3e, 0x47, 0x1f,
+-      0xff, 0xf2, 0xd1, 0x80, 0xdc, 0x84, 0x4f, 0x0d, 0xfa, 0x78, 0x3b, 0x71,
+-      0xf3, 0x63, 0xff, 0x7a, 0xb4, 0xb7, 0x26, 0xdd, 0x0f, 0xcc, 0xb9, 0x7a,
+-      0x0b, 0x7b, 0x09, 0x7d, 0xa7, 0xe8, 0x67, 0xdd, 0xeb, 0x1c, 0xa3, 0x7f,
+-      0x99, 0xcb, 0x15, 0x0d, 0xd2, 0x6e, 0x56, 0xfd, 0xdb, 0x51, 0xf3, 0x6f,
+-      0x66, 0x6a, 0x1b, 0xcf, 0xd1, 0xf5, 0x54, 0xeb, 0xd1, 0xfb, 0x2b, 0xfd,
+-      0x92, 0x19, 0xdc, 0x5a, 0x89, 0x55, 0x5d, 0x90, 0xb7, 0x5e, 0x2c, 0xea,
+-      0x9a, 0xdd, 0xcf, 0x9a, 0xcd, 0x9e, 0xc9, 0x94, 0x83, 0x83, 0x48, 0x4d,
+-      0x73, 0xaf, 0xbd, 0xa7, 0x91, 0x0a, 0xd9, 0x4f, 0x0d, 0x9d, 0x67, 0xef,
+-      0x93, 0x31, 0x64, 0x6e, 0xa6, 0xa2, 0x27, 0x6f, 0xad, 0xd5, 0xe9, 0xfe,
+-      0x9a, 0xae, 0xbc, 0xbf, 0x76, 0x4e, 0x9e, 0xba, 0x72, 0xee, 0x1c, 0x7d,
+-      0x97, 0xcb, 0x2d, 0xfd, 0xac, 0xfb, 0x80, 0x37, 0xfc, 0x9f, 0x29, 0x2c,
+-      0x6c, 0xac, 0xe8, 0x8e, 0xcf, 0xef, 0x6c, 0x89, 0x8d, 0xe3, 0x17, 0x55,
+-      0xa6, 0xe3, 0x2e, 0x13, 0xf5, 0x4a, 0x59, 0xcb, 0x42, 0x14, 0x4b, 0x33,
+-      0xaa, 0x18, 0x97, 0x05, 0x0d, 0xca, 0x96, 0xe0, 0x6e, 0xc6, 0x07, 0xb6,
+-      0x15, 0x0c, 0x5a, 0x23, 0x45, 0x39, 0xc4, 0x5e, 0x2e, 0xcf, 0x3e, 0x2c,
+-      0xdc, 0x0f, 0xad, 0x6f, 0xf5, 0x79, 0x77, 0xeb, 0x3e, 0x8e, 0xef, 0x83,
+-      0xb4, 0x67, 0xee, 0xdc, 0x10, 0x8f, 0x95, 0xfe, 0x4a, 0x3d, 0x16, 0x97,
+-      0x39, 0xbd, 0x47, 0x84, 0x73, 0x9e, 0xa8, 0xe8, 0xe7, 0x41, 0xad, 0x9f,
+-      0x5d, 0x8d, 0xc7, 0x31, 0x4f, 0xce, 0x9e, 0x40, 0x6a, 0xe0, 0x82, 0x29,
+-      0xfb, 0x63, 0xd4, 0xcc, 0xeb, 0x6a, 0x7b, 0xad, 0xa8, 0xed, 0xd5, 0x36,
+-      0xf5, 0x10, 0xed, 0xd6, 0x78, 0xac, 0xd6, 0x37, 0x23, 0x88, 0xa1, 0x69,
+-      0xd4, 0x63, 0x8d, 0x4f, 0xe6, 0x8e, 0xb0, 0xce, 0xc4, 0x8e, 0xef, 0xa8,
+-      0xd8, 0xfb, 0xba, 0xff, 0xa4, 0x59, 0xc9, 0xef, 0x13, 0xba, 0x4e, 0x58,
+-      0xb0, 0x58, 0x77, 0xae, 0x1c, 0x93, 0xe1, 0x16, 0xf1, 0x91, 0x5a, 0x92,
+-      0xf4, 0x12, 0xab, 0x85, 0xd6, 0x3e, 0x49, 0x6a, 0x9f, 0x18, 0x32, 0x27,
+-      0xfe, 0x85, 0xf6, 0x69, 0xfd, 0xa6, 0x6b, 0xa1, 0x83, 0x96, 0x51, 0xaf,
+-      0xb3, 0xcd, 0x48, 0x52, 0x3b, 0x3b, 0x68, 0xfe, 0x6c, 0x3f, 0x4b, 0xac,
+-      0xe2, 0x3e, 0x75, 0x07, 0x1c, 0x5c, 0x33, 0x26, 0x9d, 0xa3, 0xb8, 0x40,
+-      0x0e, 0xf7, 0x06, 0xb5, 0x4e, 0xbc, 0x3a, 0x9d, 0x64, 0x4d, 0x77, 0xd0,
+-      0xf5, 0xd9, 0x3e, 0x31, 0xd4, 0x8d, 0xe9, 0xb3, 0x0b, 0xd3, 0x26, 0xe3,
+-      0xe4, 0x98, 0x47, 0x39, 0xee, 0xa2, 0xfd, 0x44, 0x23, 0xfb, 0x2d, 0xa5,
+-      0xfa, 0x59, 0x0f, 0x2c, 0xd6, 0xdc, 0x5e, 0xb4, 0x0f, 0x8e, 0x88, 0xd4,
+-      0x40, 0x23, 0x52, 0xfd, 0x31, 0x78, 0xce, 0x3a, 0xa1, 0x7f, 0x63, 0x98,
+-      0xd3, 0x24, 0xc0, 0xe3, 0xc5, 0x3f, 0xe7, 0xba, 0xa4, 0xb3, 0x85, 0x18,
+-      0x6b, 0xf9, 0xd3, 0x54, 0xbe, 0x05, 0xa9, 0x21, 0x07, 0x9e, 0xfb, 0x3a,
+-      0xe7, 0x15, 0xbe, 0x30, 0xef, 0xd9, 0xca, 0x3c, 0xfa, 0xe2, 0x7a, 0xad,
+-      0xb5, 0x94, 0x7a, 0x82, 0x7a, 0xab, 0xe0, 0x68, 0xce, 0x11, 0x18, 0xf6,
+-      0xf5, 0x9e, 0x3d, 0xae, 0x05, 0x99, 0xb8, 0x03, 0x9f, 0xa8, 0x42, 0x3c,
+-      0xec, 0x8c, 0x54, 0x7e, 0x97, 0x90, 0x4e, 0x8e, 0xdc, 0x36, 0x5d, 0xed,
+-      0xb3, 0xd8, 0x17, 0x29, 0xf5, 0x22, 0xb9, 0xe9, 0x09, 0x6a, 0x9f, 0xe1,
+-      0xa9, 0x4f, 0xd4, 0x34, 0xb5, 0xcd, 0x88, 0xa7, 0xe7, 0x55, 0x39, 0xe8,
+-      0xb0, 0xa3, 0xd4, 0xe3, 0xfc, 0x6e, 0xcf, 0xd4, 0x1c, 0x2f, 0xf1, 0x3c,
+-      0x72, 0xc2, 0xed, 0xde, 0x7f, 0xab, 0xcd, 0x5f, 0x9a, 0xab, 0xd4, 0x18,
+-      0x6d, 0x78, 0xcb, 0xc7, 0xfd, 0x11, 0x24, 0x73, 0xb3, 0xf4, 0xcf, 0x99,
+-      0xe5, 0xb2, 0x7f, 0x8a, 0xf7, 0x5c, 0x2f, 0x64, 0x96, 0x77, 0xec, 0x9d,
+-      0x07, 0xcd, 0xb5, 0x92, 0xf9, 0x60, 0x78, 0x75, 0x7c, 0xfe, 0x99, 0x2f,
+-      0x13, 0x47, 0xf8, 0xbe, 0x39, 0xa3, 0xf7, 0x50, 0xaa, 0xc7, 0xd7, 0x3d,
+-      0xfe, 0x08, 0x7b, 0xfc, 0x82, 0x6a, 0xf0, 0xde, 0x50, 0xcf, 0x75, 0xc8,
+-      0xfe, 0x11, 0xe1, 0x71, 0xad, 0xcb, 0xba, 0xa0, 0xfb, 0xaa, 0x11, 0xf6,
+-      0x55, 0x2e, 0x9e, 0x26, 0xc7, 0x9c, 0x2c, 0x77, 0xe2, 0xf9, 0xb2, 0x87,
+-      0x67, 0x58, 0x3f, 0x9e, 0x2a, 0x5b, 0xd8, 0xfa, 0x88, 0xcc, 0x58, 0x62,
+-      0x27, 0xce, 0xfb, 0xd2, 0xf9, 0x1e, 0xed, 0x36, 0x03, 0xb9, 0x7f, 0x25,
+-      0x79, 0x85, 0x67, 0x14, 0x72, 0x66, 0x8b, 0xb0, 0x03, 0x1b, 0xdf, 0xe9,
+-      0x30, 0x70, 0x38, 0x3e, 0x84, 0xbe, 0xf6, 0xbb, 0xf9, 0xb2, 0xd0, 0x7a,
+-      0x40, 0xd7, 0x6a, 0xdd, 0x6f, 0x34, 0xe3, 0x4e, 0xf2, 0xd9, 0xd5, 0x4b,
+-      0x43, 0xfc, 0x3a, 0xdd, 0xd6, 0xf9, 0x92, 0xa0, 0x66, 0x68, 0x91, 0x59,
+-      0xe0, 0xa7, 0xd8, 0xc8, 0x7e, 0x21, 0xb3, 0x6c, 0x7f, 0xad, 0x37, 0xff,
+-      0x29, 0x56, 0xea, 0x3e, 0xc3, 0x6f, 0x66, 0xbd, 0xab, 0xc6, 0xe1, 0x70,
+-      0xc5, 0x8f, 0x06, 0x9a, 0x0e, 0x16, 0x54, 0xbd, 0x27, 0x73, 0x93, 0x15,
+-      0x1d, 0xb5, 0xd0, 0xb9, 0x91, 0x7d, 0x40, 0xc3, 0x01, 0xcf, 0x5d, 0x27,
+-      0x14, 0x63, 0xb1, 0x9b, 0xb1, 0x48, 0x86, 0x31, 0xb6, 0xdb, 0xcd, 0x41,
+-      0x32, 0x6c, 0x16, 0x79, 0x71, 0x8b, 0xae, 0xb1, 0x75, 0xf5, 0xec, 0xbf,
+-      0x59, 0x53, 0x27, 0x0d, 0xf6, 0x23, 0xba, 0x1f, 0x8f, 0x62, 0x2a, 0xdd,
+-      0xc6, 0x3e, 0x29, 0x8a, 0xed, 0xe9, 0x1e, 0xea, 0x1a, 0x03, 0xc6, 0xc1,
+-      0x4b, 0x6a, 0xe5, 0x17, 0xfa, 0x88, 0x4d, 0xe3, 0x9a, 0xc3, 0x6c, 0xb1,
+-      0x91, 0xf9, 0x9b, 0x59, 0x46, 0xb1, 0x76, 0x8b, 0xee, 0xe1, 0xf5, 0x1d,
+-      0x1c, 0xf6, 0xc7, 0x06, 0xa6, 0x17, 0x38, 0xd8, 0xd5, 0x2d, 0x13, 0x05,
+-      0xe8, 0x5c, 0xfe, 0x6a, 0x4d, 0x81, 0x93, 0xfd, 0xbd, 0x3a, 0x03, 0x67,
+-      0x03, 0x6d, 0x91, 0x75, 0x4a, 0xb5, 0xa6, 0x4d, 0xe4, 0x2a, 0xf5, 0x26,
+-      0xe1, 0x64, 0xd9, 0xff, 0xcd, 0x4c, 0xb1, 0x27, 0x3b, 0xa8, 0xd4, 0x4e,
+-      0x62, 0xe9, 0xe3, 0x8e, 0xe1, 0x43, 0xec, 0xc4, 0xf7, 0xb6, 0xb2, 0xb7,
+-      0xfa, 0x3a, 0xdb, 0xb7, 0xb7, 0x8a, 0xdf, 0x24, 0x7f, 0x1b, 0xdd, 0x09,
+-      0xe8, 0x7e, 0xa7, 0xa0, 0x22, 0x9e, 0x37, 0xfb, 0x38, 0xb5, 0xe0, 0x6f,
+-      0x96, 0x75, 0xc1, 0x9d, 0x5f, 0xf5, 0xd5, 0x6a, 0x6a, 0xa9, 0x8f, 0xc8,
+-      0xf9, 0x61, 0xe5, 0x73, 0xcc, 0x59, 0x37, 0x7e, 0x49, 0x6d, 0xa6, 0x6f,
+-      0x7a, 0xaa, 0x76, 0x59, 0xf5, 0x01, 0x9b, 0xc4, 0x6b, 0xe1, 0xac, 0xf9,
+-      0x03, 0x36, 0x7d, 0x5e, 0xef, 0x62, 0xce, 0x9a, 0xf1, 0xc5, 0xb4, 0x51,
+-      0xba, 0xd3, 0x15, 0xfc, 0xf8, 0xf8, 0xc8, 0x1b, 0x4e, 0xcc, 0x47, 0xa1,
+-      0x93, 0x39, 0x36, 0xfb, 0x4f, 0x1c, 0x6b, 0x5f, 0x0a, 0xfc, 0xa6, 0xfc,
+-      0x5d, 0xf2, 0xbe, 0xd1, 0xd5, 0x82, 0xc2, 0x0c, 0x6d, 0x3c, 0xf4, 0x75,
+-      0x62, 0x32, 0x3f, 0x86, 0xfb, 0xd8, 0x46, 0xe0, 0x59, 0xd6, 0xdb, 0x63,
+-      0xe4, 0x8c, 0xe6, 0xb4, 0x83, 0x32, 0x9f, 0x8f, 0x94, 0x92, 0x83, 0xa7,
+-      0x99, 0xb7, 0xc7, 0xf9, 0x7c, 0x94, 0xf7, 0xdc, 0x4a, 0x7d, 0x77, 0xef,
+-      0x78, 0x3d, 0xbe, 0x3d, 0x1e, 0xc3, 0xd6, 0xf1, 0x80, 0x9a, 0x02, 0xb7,
+-      0x35, 0x72, 0xdf, 0x57, 0x89, 0xe7, 0xcd, 0x4b, 0xaf, 0xc3, 0x5a, 0x27,
+-      0xe9, 0xde, 0xcd, 0xdc, 0xab, 0x3b, 0x08, 0xc7, 0x21, 0x8e, 0xfe, 0xd9,
+-      0x5b, 0x2e, 0xd0, 0x44, 0xbd, 0xbf, 0xd4, 0x12, 0xeb, 0xc7, 0x57, 0x57,
+-      0x9e, 0x47, 0xd2, 0x79, 0x6a, 0x0b, 0x62, 0xb2, 0x44, 0x4c, 0x32, 0x36,
+-      0x4f, 0x97, 0x88, 0x4b, 0x6a, 0xc3, 0x93, 0x25, 0x8d, 0x6d, 0x1f, 0xcf,
+-      0x75, 0x0c, 0xa9, 0x2a, 0x56, 0x3e, 0x55, 0x4f, 0x78, 0xaf, 0x45, 0x50,
+-      0x6f, 0xe9, 0xdf, 0x76, 0xf0, 0x66, 0x31, 0xe1, 0x6c, 0x28, 0x6b, 0x3c,
+-      0xfc, 0x6d, 0x0d, 0x0f, 0x6f, 0x47, 0xaa, 0xfa, 0x44, 0xce, 0x4c, 0x42,
+-      0x73, 0xdd, 0x62, 0xe7, 0xa6, 0xd2, 0xf0, 0x34, 0x7d, 0x9f, 0xa7, 0xc6,
+-      0x76, 0xdf, 0x67, 0xc8, 0xc7, 0xa6, 0x8c, 0x2e, 0xf6, 0xd4, 0xf4, 0x87,
+-      0xbe, 0x33, 0xf3, 0x37, 0x2d, 0x3b, 0x75, 0x4c, 0x8e, 0x17, 0x71, 0x2b,
+-      0xfb, 0x1e, 0x3f, 0x44, 0xf5, 0x6e, 0x53, 0xbc, 0xf3, 0x43, 0xbc, 0xf3,
+-      0x0f, 0xf9, 0x3c, 0x51, 0x4a, 0x66, 0x7b, 0x78, 0xe7, 0x27, 0xf9, 0x3c,
+-      0x59, 0x6a, 0xad, 0xd3, 0x67, 0x4c, 0x4e, 0x85, 0xac, 0x03, 0x2f, 0xab,
+-      0x52, 0xbc, 0x12, 0x0e, 0xf6, 0xc0, 0x06, 0x1a, 0x0e, 0xce, 0xf1, 0xb3,
+-      0xfe, 0x6d, 0x49, 0xd7, 0x38, 0xcd, 0xf9, 0x83, 0xba, 0x26, 0x67, 0xae,
+-      0x14, 0x97, 0xd4, 0x47, 0x9e, 0x0c, 0x9f, 0xc6, 0x29, 0x35, 0x1f, 0xa9,
+-      0x99, 0xf9, 0x42, 0x4e, 0xaf, 0x30, 0xa4, 0xbb, 0xc8, 0xac, 0x72, 0x75,
+-      0x67, 0x8d, 0xab, 0xbd, 0xa9, 0x1b, 0xeb, 0xaa, 0x77, 0x48, 0x39, 0x47,
+-      0x30, 0x8f, 0xd8, 0xd7, 0x35, 0x55, 0xf3, 0x8f, 0xfe, 0x4c, 0x7d, 0x67,
+-      0x85, 0x09, 0x93, 0x7e, 0x08, 0x6f, 0xd5, 0x63, 0xd1, 0xda, 0x6f, 0x3e,
+-      0x29, 0x5f, 0xf7, 0x82, 0xd3, 0xf1, 0x1e, 0x7e, 0xa7, 0x7b, 0xc1, 0x4f,
+-      0x54, 0x2e, 0xde, 0xf3, 0x19, 0x67, 0x15, 0xd0, 0x45, 0xed, 0xf1, 0x3e,
+-      0x39, 0xa1, 0x83, 0x2a, 0x4a, 0xe0, 0x14, 0xfb, 0xb0, 0x23, 0x5d, 0x49,
+-      0x67, 0x17, 0xf7, 0x0b, 0x1d, 0x87, 0x5c, 0xb0, 0x93, 0x3a, 0x93, 0x73,
+-      0xca, 0x1d, 0x5c, 0xa3, 0xb9, 0xf0, 0x3e, 0xfa, 0xe6, 0xb7, 0xed, 0x96,
+-      0xe7, 0x63, 0x57, 0xe9, 0x39, 0xc3, 0xf2, 0xb4, 0x5f, 0x52, 0x99, 0x5d,
+-      0xb4, 0xe7, 0x2c, 0xed, 0x89, 0x78, 0x21, 0xb9, 0x31, 0x55, 0x59, 0x5f,
+-      0xb0, 0xb4, 0x1d, 0x15, 0x7b, 0x38, 0xa6, 0x39, 0x4f, 0xf6, 0x9f, 0x62,
+-      0x8d, 0xdd, 0x02, 0xfd, 0x3b, 0x85, 0xb6, 0xa1, 0x2d, 0xb1, 0x85, 0xf6,
+-      0x1c, 0x8e, 0x57, 0xf8, 0x94, 0xdf, 0xf1, 0xbc, 0x92, 0xb1, 0xbe, 0x9e,
+-      0x78, 0xbf, 0x22, 0x9d, 0x60, 0x6c, 0xbb, 0xa8, 0xef, 0xab, 0x71, 0xde,
+-      0x57, 0xc1, 0xf2, 0xff, 0x00, 0xb0, 0x60, 0x72, 0xf9, 0x60, 0x17, 0x00,
+-      0x00, 0x00 };
++      0xbd, 0x59, 0x6d, 0x70, 0x5b, 0x55, 0x7a, 0x7e, 0xae, 0x74, 0x25, 0x5d,
++      0xdb, 0xb2, 0x75, 0x8d, 0x95, 0x20, 0xb7, 0x2e, 0xd6, 0x8d, 0xaf, 0x6c,
++      0x11, 0xb9, 0xe1, 0x2a, 0x36, 0x45, 0x19, 0xee, 0x94, 0x1b, 0x7f, 0x21,
++      0x92, 0x10, 0x94, 0x42, 0x5b, 0x67, 0x96, 0x19, 0x4c, 0xe2, 0x4d, 0x4c,
++      0x08, 0x6c, 0xba, 0xcb, 0x4c, 0xdd, 0xd9, 0x4c, 0x23, 0xfc, 0x15, 0x93,
++      0xc8, 0x16, 0x6b, 0x20, 0x26, 0x3b, 0x3b, 0x43, 0xc6, 0xf9, 0x70, 0x0a,
++      0x72, 0x14, 0xda, 0x3f, 0x3b, 0xd3, 0x65, 0xf0, 0x6c, 0x12, 0x12, 0x58,
++      0xd8, 0xb4, 0xd3, 0x3f, 0xc9, 0xf4, 0xc7, 0x7a, 0x21, 0xa1, 0x81, 0x42,
++      0x36, 0xed, 0x0c, 0x9d, 0x50, 0x68, 0x4e, 0x9f, 0x73, 0x25, 0x07, 0x13,
++      0xb2, 0xfd, 0xd9, 0xcc, 0x08, 0x4b, 0xe7, 0xde, 0x73, 0xce, 0x7b, 0xce,
++      0xfb, 0x3c, 0xcf, 0xfb, 0x9c, 0xc3, 0x0a, 0x05, 0x95, 0x28, 0xff, 0xab,
++      0xe6, 0xa7, 0xfd, 0xc9, 0x5d, 0xcf, 0xad, 0x5e, 0xd5, 0xbe, 0x8a, 0x5f,
++      0x57, 0x2b, 0xcb, 0x55, 0x15, 0xff, 0x8f, 0xff, 0xbc, 0x80, 0xbe, 0x18,
++      0x87, 0xfc, 0x40, 0xf3, 0xd8, 0xf3, 0x77, 0x75, 0x98, 0xd0, 0xbc, 0xf6,
++      0x63, 0x4d, 0x5b, 0x4d, 0xc0, 0x29, 0x24, 0xa2, 0x9d, 0xf8, 0x1f, 0x91,
++      0x0d, 0xab, 0x90, 0xed, 0x7f, 0x64, 0x7f, 0x7d, 0xcf, 0x5b, 0xf7, 0x19,
++      0xd7, 0x0e, 0x79, 0xa1, 0xe9, 0xf6, 0xb8, 0xaa, 0x37, 0x43, 0x6b, 0x60,
++      0x9f, 0x9f, 0xb5, 0xf4, 0xfb, 0x50, 0xb3, 0x38, 0x16, 0x70, 0x38, 0x67,
++      0x58, 0xdb, 0x90, 0xd0, 0x4f, 0x41, 0x85, 0xc3, 0x39, 0x8e, 0x15, 0x80,
++      0xbd, 0x39, 0x05, 0x97, 0x39, 0xe6, 0x68, 0x41, 0xc3, 0x82, 0xd7, 0x9d,
++      0xae, 0xaf, 0xc2, 0x46, 0xc6, 0x9c, 0xd8, 0x23, 0x02, 0x26, 0xb2, 0x7f,
++      0x60, 0x9b, 0xf1, 0xbd, 0x08, 0xa6, 0x66, 0xda, 0x91, 0x59, 0x31, 0xa7,
++      0x61, 0x73, 0xbe, 0xa1, 0x4f, 0xb3, 0xc1, 0x77, 0x14, 0xa4, 0xee, 0xd3,
++      0xd0, 0x5b, 0x8c, 0x23, 0x5b, 0xcc, 0xc2, 0x29, 0x8e, 0xf0, 0xa3, 0x21,
++      0x30, 0xa1, 0x69, 0xf7, 0x4c, 0x2c, 0x97, 0xef, 0x20, 0x38, 0x71, 0x4d,
++      0x5c, 0x4d, 0xea, 0x78, 0x6f, 0x8d, 0x10, 0xd5, 0x36, 0xb2, 0x55, 0xed,
++      0x59, 0x78, 0x6d, 0xc3, 0x5a, 0xef, 0x55, 0xd0, 0xf5, 0xc7, 0x66, 0x7c,
++      0x42, 0x79, 0xf4, 0x51, 0x8f, 0x0d, 0x4d, 0xb1, 0xa3, 0x6a, 0x53, 0xa1,
++      0x01, 0x63, 0x45, 0x1d, 0x7b, 0x8b, 0x61, 0x8c, 0x14, 0xb1, 0xdb, 0x7b,
++      0xaf, 0x1f, 0x33, 0x3a, 0x9c, 0xef, 0xb5, 0xec, 0xc6, 0x8e, 0xdc, 0x20,
++      0xb6, 0xe6, 0x52, 0xd8, 0x57, 0x94, 0x31, 0x46, 0x31, 0x5c, 0x54, 0xe1,
++      0x9f, 0x30, 0x22, 0xef, 0xe2, 0x76, 0xcf, 0x84, 0x18, 0xb1, 0x02, 0x18,
++      0xb2, 0xe2, 0x18, 0xcd, 0x7b, 0xb8, 0xce, 0x00, 0x86, 0xcd, 0xeb, 0xa2,
++      0xdf, 0x32, 0xac, 0x51, 0x88, 0xc6, 0xd3, 0x96, 0x11, 0xe9, 0xf2, 0xc2,
++      0xf9, 0xb1, 0x19, 0xc1, 0x28, 0x63, 0x1f, 0x71, 0xfb, 0x8d, 0xa0, 0xeb,
++      0x66, 0x3f, 0x87, 0xfd, 0x74, 0x8c, 0x7d, 0xbb, 0x6f, 0x74, 0x14, 0x89,
++      0xc8, 0x18, 0x3c, 0xe8, 0x0b, 0xb7, 0xb2, 0x5f, 0x53, 0x74, 0x0c, 0x46,
++      0x9c, 0xe3, 0x64, 0xfd, 0xed, 0x0e, 0xc7, 0xc8, 0xb2, 0xbf, 0x11, 0x3d,
++      0x06, 0x39, 0x56, 0x03, 0x7f, 0xb7, 0xb3, 0xbf, 0x02, 0x8f, 0x1d, 0x8b,
++      0x0e, 0xb1, 0xcf, 0x29, 0x4b, 0xc5, 0x19, 0x7e, 0xfa, 0x74, 0x43, 0x66,
++      0x56, 0x09, 0xb0, 0x7d, 0x2f, 0xf8, 0xdc, 0xac, 0xc2, 0xa1, 0x8c, 0x85,
++      0x21, 0xae, 0x5b, 0x63, 0xdb, 0x38, 0xdb, 0x7c, 0xa6, 0xc5, 0xf1, 0xa1,
++      0x77, 0x15, 0x97, 0x62, 0x62, 0x31, 0x37, 0xbf, 0xaf, 0x9d, 0x63, 0xe4,
++      0x4b, 0x39, 0x95, 0xef, 0x74, 0xe6, 0x6f, 0x88, 0x27, 0xd5, 0xa5, 0xcf,
++      0x07, 0x95, 0x0e, 0xb6, 0x39, 0x6a, 0x03, 0xf6, 0xe6, 0xa1, 0xf9, 0x4d,
++      0x8d, 0xf3, 0x68, 0xf8, 0x28, 0x37, 0xa8, 0xf4, 0x14, 0x1d, 0xa5, 0x7b,
++      0xb6, 0x43, 0x71, 0x66, 0x55, 0xa5, 0x6b, 0x5a, 0xc6, 0x2d, 0xc4, 0x0b,
++      0x96, 0xc2, 0x98, 0x7f, 0x22, 0xe3, 0x75, 0xa2, 0xca, 0x0d, 0xb1, 0x32,
++      0xe6, 0x41, 0x95, 0xd9, 0xa3, 0xac, 0x9f, 0x15, 0x22, 0x9d, 0x4c, 0x2b,
++      0xeb, 0x66, 0xa1, 0x05, 0x6d, 0x5b, 0xcd, 0x4d, 0xec, 0x43, 0x76, 0x99,
++      0x89, 0x83, 0xf9, 0x28, 0x3e, 0xb0, 0x3c, 0x38, 0xb4, 0xac, 0x02, 0xaa,
++      0xa9, 0xf0, 0x83, 0xe0, 0x79, 0x0b, 0x6a, 0x0d, 0xbf, 0x5f, 0xdd, 0xa4,
++      0x62, 0xa4, 0x7d, 0x9d, 0xd2, 0xc5, 0x3e, 0x3e, 0xe6, 0xf9, 0x68, 0x2e,
++      0x8d, 0x20, 0xb1, 0x53, 0x65, 0xc7, 0x22, 0x05, 0xee, 0xcd, 0x7b, 0x56,
++      0x2c, 0xfe, 0xb4, 0xc4, 0x63, 0xad, 0x11, 0x91, 0x7b, 0x53, 0x6d, 0xc7,
++      0xe2, 0x73, 0xdc, 0x07, 0xaf, 0xa9, 0xe2, 0xd7, 0x96, 0x0f, 0xf3, 0x9b,
++      0x2c, 0xe6, 0x54, 0x87, 0x9f, 0xed, 0xc7, 0xdc, 0x76, 0xf9, 0x1b, 0x7a,
++      0xf7, 0xb7, 0xf6, 0xa1, 0xb4, 0x07, 0xc3, 0xf9, 0x26, 0xc6, 0x5c, 0xda,
++      0x83, 0x47, 0xb8, 0xde, 0xdf, 0xfa, 0xe4, 0xd7, 0xbb, 0x6e, 0xb6, 0x6d,
++      0x66, 0x9c, 0x1e, 0xdb, 0x9c, 0x5f, 0xe1, 0xad, 0x07, 0xea, 0xda, 0xb1,
++      0x8f, 0x39, 0xee, 0x4a, 0x2e, 0x47, 0xd6, 0x7d, 0x1e, 0xd6, 0xd7, 0x4f,
++      0xd7, 0xa1, 0x6f, 0x99, 0xbb, 0x6f, 0xfa, 0xc6, 0x69, 0x21, 0xce, 0x24,
++      0xfd, 0x98, 0x33, 0x87, 0x22, 0xd5, 0xc8, 0x5a, 0x5e, 0xe6, 0xfb, 0x2c,
++      0xe7, 0x2f, 0x24, 0xbd, 0x38, 0x9c, 0x3c, 0x84, 0x6c, 0x2d, 0x30, 0x93,
++      0x93, 0xbc, 0x32, 0xe6, 0xcf, 0xf2, 0xbf, 0x9e, 0xa2, 0x5c, 0x9f, 0xc5,
++      0xf5, 0x29, 0x38, 0x66, 0x4a, 0x4c, 0x5b, 0x6a, 0x33, 0xf9, 0xb5, 0x83,
++      0xfb, 0x59, 0xdf, 0x1e, 0x24, 0x3e, 0x81, 0x0f, 0x73, 0xfd, 0xd8, 0x5c,
++      0x8a, 0x05, 0xd7, 0x73, 0x50, 0x7c, 0x6d, 0x69, 0x1c, 0x2a, 0xfd, 0x26,
++      0xc7, 0xd3, 0x6a, 0x47, 0xce, 0xc8, 0xa4, 0x91, 0x38, 0xd7, 0xa1, 0xc8,
++      0xfe, 0x69, 0x75, 0x65, 0xc1, 0x8f, 0x68, 0x5d, 0xe9, 0x79, 0x95, 0xbd,
++      0x41, 0x7d, 0x7a, 0x42, 0xc1, 0xf6, 0x98, 0x7c, 0xb6, 0x41, 0x6d, 0x29,
++      0x40, 0xab, 0xb6, 0x77, 0xa9, 0x73, 0x13, 0x46, 0xdf, 0x71, 0x25, 0x11,
++      0x9d, 0x70, 0xfb, 0xec, 0x52, 0x5b, 0x0b, 0x01, 0xae, 0x27, 0xce, 0x9c,
++      0x40, 0xab, 0xb1, 0x9f, 0x53, 0x7f, 0xcd, 0x07, 0xe7, 0xdc, 0x3e, 0xcf,
++      0xa9, 0xf1, 0x82, 0x6c, 0x37, 0xac, 0xa8, 0x12, 0xc0, 0xdd, 0x49, 0x0d,
++      0x2b, 0x5b, 0x44, 0x63, 0x77, 0xd2, 0x98, 0xef, 0xf6, 0x46, 0x70, 0x90,
++      0x5c, 0x20, 0xee, 0x9c, 0x3f, 0x6c, 0x19, 0x41, 0x77, 0xd1, 0x8b, 0x68,
++      0xad, 0x83, 0xfd, 0xf9, 0x00, 0x7e, 0x49, 0xfc, 0xf7, 0x58, 0x3a, 0x46,
++      0xf2, 0x46, 0xfc, 0x57, 0x48, 0xa4, 0x8e, 0x30, 0x67, 0x0b, 0xe4, 0xc0,
++      0xfe, 0x62, 0x53, 0xfc, 0x08, 0x8c, 0x81, 0x6e, 0x72, 0x40, 0x6b, 0x97,
++      0x31, 0x40, 0x57, 0x6d, 0x72, 0xa7, 0xd8, 0x80, 0x1c, 0xf9, 0xd0, 0xed,
++      0xf2, 0x6a, 0x50, 0xe9, 0x2a, 0xbe, 0x4f, 0x6d, 0xed, 0x21, 0xbe, 0x10,
++      0x8a, 0x98, 0x7e, 0xa4, 0xea, 0xa2, 0x38, 0x4d, 0xac, 0x64, 0xc3, 0x15,
++      0xcc, 0xa5, 0xcc, 0xe7, 0x45, 0x3e, 0x5f, 0xa7, 0x74, 0xce, 0x46, 0xf1,
++      0x4b, 0xeb, 0x6b, 0xe1, 0x84, 0xab, 0xd9, 0xe6, 0x5b, 0xd2, 0xae, 0xe1,
++      0xf2, 0xcb, 0x95, 0xf8, 0xf4, 0xe5, 0x20, 0xbe, 0x7c, 0x99, 0xfc, 0xce,
++      0xa3, 0xbd, 0x12, 0x42, 0xa4, 0xda, 0x84, 0x28, 0x5a, 0xad, 0xf8, 0xa8,
++      0x36, 0x16, 0xbd, 0x00, 0xa9, 0x8d, 0x8e, 0xba, 0x35, 0x67, 0xec, 0x1a,
++      0x40, 0xc2, 0x39, 0xe5, 0xee, 0x85, 0xa3, 0xae, 0x2a, 0x9c, 0x16, 0xd8,
++      0x54, 0xda, 0x0b, 0xbf, 0xdd, 0xa5, 0xbe, 0xc3, 0xdc, 0x9c, 0x77, 0x73,
++      0xd3, 0xa5, 0xde, 0x53, 0xb8, 0xdf, 0x83, 0xca, 0xd2, 0x33, 0xd5, 0xce,
++      0xa8, 0x23, 0x39, 0xa3, 0x77, 0x9c, 0xeb, 0xeb, 0x77, 0xfb, 0x66, 0xd4,
++      0x04, 0xf7, 0x7e, 0xa1, 0x9c, 0x9b, 0x6a, 0xfb, 0x31, 0xee, 0x33, 0x73,
++      0xef, 0xee, 0xe3, 0x63, 0xdc, 0x63, 0x39, 0xdf, 0xe0, 0x2d, 0xf3, 0x0d,
++      0x72, 0xbe, 0xe3, 0x4b, 0xe6, 0xdb, 0xbd, 0x64, 0xbe, 0xdd, 0x4b, 0xe6,
++      0x4b, 0x91, 0xab, 0xff, 0x22, 0x86, 0xc2, 0xa5, 0xb1, 0x55, 0x7b, 0xe0,
++      0x96, 0xb9, 0x07, 0x38, 0xf7, 0x01, 0xb1, 0x90, 0x29, 0x8d, 0x53, 0x6d,
++      0xef, 0x5c, 0x32, 0xf7, 0x4e, 0xce, 0xbd, 0x38, 0x8e, 0x4e, 0x2d, 0x12,
++      0x62, 0xa3, 0x25, 0x84, 0x6a, 0x9b, 0x7a, 0x17, 0x9a, 0x33, 0x5d, 0xc4,
++      0x4e, 0x25, 0x12, 0xf3, 0x1e, 0x98, 0x83, 0xf5, 0x5e, 0x1f, 0x16, 0x6a,
++      0x17, 0xb9, 0x51, 0x5d, 0xfe, 0xfb, 0x9a, 0x02, 0x6a, 0xfd, 0x1b, 0xb9,
++      0x10, 0xc7, 0x88, 0xe9, 0xfd, 0x8a, 0x10, 0xa7, 0xd6, 0x24, 0x06, 0xbc,
++      0x48, 0xf4, 0xd5, 0xc0, 0x24, 0x86, 0x7c, 0x65, 0x2e, 0x2c, 0xed, 0x73,
++      0xdc, 0xed, 0x53, 0x74, 0xfb, 0x08, 0xf1, 0xe1, 0xbd, 0x57, 0xc4, 0x5b,
++      0x2d, 0x61, 0xbc, 0x4d, 0x4e, 0x9e, 0x2c, 0x2e, 0xea, 0x8a, 0xd4, 0x0d,
++      0x78, 0x4e, 0x59, 0x7e, 0xc6, 0x34, 0xb4, 0xc3, 0xff, 0xad, 0xfe, 0x04,
++      0x8c, 0x29, 0xdb, 0xbc, 0x78, 0x3d, 0x89, 0x27, 0x2b, 0x61, 0xf4, 0xee,
++      0x53, 0xb2, 0xe9, 0x2a, 0x18, 0xce, 0x4a, 0x25, 0x9b, 0xd2, 0x20, 0x79,
++      0xa3, 0x36, 0x1e, 0x35, 0x8d, 0xec, 0x65, 0xbe, 0xac, 0x4e, 0xde, 0x2e,
++      0x06, 0x95, 0x63, 0x04, 0xf1, 0x6c, 0xfe, 0x7d, 0xcc, 0xfb, 0xa4, 0x86,
++      0x49, 0xed, 0xe4, 0xc0, 0x27, 0xa4, 0x86, 0x05, 0x48, 0x44, 0x15, 0x7b,
++      0xf2, 0x9e, 0xd3, 0x8d, 0x10, 0xf0, 0xb7, 0xf9, 0x70, 0xd1, 0x1c, 0xb6,
++      0xea, 0xb1, 0x16, 0xe7, 0x5b, 0xb9, 0x07, 0xcb, 0x54, 0x44, 0x66, 0x96,
++      0x8e, 0x15, 0xe1, 0x58, 0x11, 0x7c, 0x92, 0x13, 0xa2, 0xd2, 0x36, 0xe2,
++      0x0b, 0x30, 0x19, 0x47, 0x04, 0x57, 0x0a, 0x5b, 0xfc, 0xa8, 0x09, 0x43,
++      0x6d, 0x56, 0xb1, 0x3d, 0xaf, 0x29, 0xdd, 0x79, 0xe8, 0x5e, 0xdb, 0x8c,
++      0x1e, 0xc6, 0x51, 0xc6, 0xc3, 0xba, 0x76, 0x4c, 0x55, 0x36, 0x4e, 0x07,
++      0x50, 0x3d, 0xf5, 0x99, 0x78, 0x9f, 0x7a, 0xf8, 0xc6, 0xbd, 0xac, 0x17,
++      0xc9, 0x00, 0xaa, 0xdc, 0xb9, 0x85, 0xf8, 0xb8, 0xad, 0x0e, 0x17, 0x39,
++      0x5f, 0xf4, 0x2f, 0x03, 0xf0, 0x4e, 0x05, 0xe0, 0x9b, 0x52, 0x30, 0xd3,
++      0x1e, 0x80, 0x67, 0x46, 0xfe, 0x56, 0x10, 0x30, 0xa7, 0xb1, 0x5d, 0x6f,
++      0xc0, 0x78, 0x9e, 0x45, 0xda, 0xfc, 0x19, 0x06, 0xdc, 0xef, 0x2a, 0x9e,
++      0xca, 0x6b, 0x08, 0x1d, 0x10, 0xa2, 0xd1, 0x16, 0x22, 0x96, 0xf4, 0x60,
++      0xd6, 0x1c, 0x8e, 0x06, 0xb8, 0x8e, 0x61, 0x4b, 0x6a, 0x8e, 0x0f, 0xea,
++      0x8c, 0x91, 0x39, 0xc7, 0xa8, 0x37, 0x4f, 0xa8, 0x4a, 0xef, 0xf4, 0x1e,
++      0xc1, 0x98, 0xfa, 0x1e, 0xf0, 0x0a, 0x51, 0xd3, 0xd6, 0x34, 0x70, 0x9e,
++      0xda, 0x3c, 0x13, 0x8b, 0xf5, 0x0e, 0x29, 0xc0, 0xfa, 0x39, 0x1f, 0xfc,
++      0x53, 0xff, 0xc5, 0x3a, 0x2b, 0x44, 0xe1, 0x5e, 0x81, 0x77, 0xad, 0x6c,
++      0xbc, 0x02, 0x46, 0xea, 0x24, 0xc2, 0xb8, 0xf4, 0xa2, 0x10, 0xdb, 0xdb,
++      0x43, 0x78, 0xcd, 0x32, 0x76, 0x7d, 0xec, 0x15, 0xb8, 0x98, 0xcc, 0x0e,
++      0xd6, 0x53, 0xb7, 0xae, 0x29, 0x51, 0x54, 0xe5, 0x8d, 0xcc, 0x15, 0x85,
++      0x4b, 0x9f, 0x31, 0xf5, 0x9d, 0x4a, 0x10, 0x55, 0x27, 0x82, 0xe8, 0x98,
++      0xf3, 0xa3, 0x62, 0x2a, 0x08, 0xef, 0xa4, 0x79, 0xfd, 0x41, 0xb8, 0xe3,
++      0x58, 0x27, 0xd1, 0x8c, 0x8b, 0x2f, 0x1b, 0xf3, 0xc7, 0x89, 0x93, 0xed,
++      0x88, 0xe2, 0x37, 0x05, 0x13, 0x17, 0x0b, 0x41, 0xa8, 0x27, 0x74, 0xd4,
++      0xbb, 0xf5, 0x4e, 0x47, 0xb5, 0xe9, 0x61, 0x5e, 0x1c, 0xe5, 0x61, 0xb7,
++      0x9e, 0x74, 0xf1, 0xd3, 0xa3, 0x74, 0xb0, 0xae, 0x6c, 0x98, 0x26, 0x95,
++      0xf9, 0xec, 0x9c, 0x75, 0x43, 0xec, 0x8f, 0xa5, 0x59, 0x47, 0x2a, 0xe0,
++      0xb3, 0xd7, 0xb1, 0x8e, 0xb0, 0x38, 0xb9, 0xba, 0x5f, 0xa1, 0xf8, 0xec,
++      0xef, 0x6a, 0x7e, 0x88, 0x9a, 0x5f, 0xfc, 0x3f, 0x35, 0x5f, 0x85, 0x3a,
++      0xe5, 0xc1, 0x98, 0x19, 0xc0, 0x6f, 0xac, 0xa6, 0x73, 0x8d, 0x08, 0x20,
++      0xd5, 0xa6, 0x23, 0x72, 0xc2, 0xc2, 0x8b, 0xdc, 0x5b, 0xdc, 0x71, 0x6b,
++      0x3d, 0x04, 0x76, 0x92, 0x53, 0x15, 0xd4, 0x86, 0xbb, 0x27, 0x82, 0xd4,
++      0x29, 0x55, 0x59, 0x4f, 0x9d, 0xdf, 0x91, 0xbc, 0x21, 0xd2, 0x31, 0x23,
++      0x1e, 0x57, 0x12, 0xa9, 0xbf, 0x43, 0x49, 0x3b, 0x62, 0xd4, 0xd1, 0x05,
++      0x7d, 0x91, 0x83, 0x5d, 0x2e, 0x07, 0x67, 0x62, 0x25, 0xed, 0x58, 0x51,
++      0x28, 0xf1, 0xef, 0x01, 0xea, 0xe7, 0xf5, 0xb6, 0x92, 0x76, 0xbe, 0x4a,
++      0xff, 0xd3, 0xcb, 0xf1, 0x1e, 0x99, 0x36, 0xb2, 0xbd, 0xcc, 0xcf, 0x25,
++      0x62, 0x63, 0x92, 0x19, 0x9c, 0xaf, 0xa5, 0xa6, 0x36, 0x07, 0x18, 0xe3,
++      0x75, 0x71, 0x9a, 0xde, 0x62, 0x98, 0xfd, 0x46, 0xf3, 0x46, 0x74, 0x98,
++      0x7c, 0x1f, 0x2d, 0x6b, 0xe9, 0x30, 0xfd, 0xc4, 0x28, 0xf3, 0xf4, 0x36,
++      0x9f, 0x9d, 0xcc, 0x1b, 0xe9, 0x2e, 0x57, 0x53, 0xa5, 0xaf, 0x90, 0x31,
++      0x49, 0x6f, 0x11, 0xc1, 0x5b, 0x2d, 0x52, 0x5f, 0x1b, 0xa8, 0xaf, 0x8b,
++      0xba, 0x2a, 0xf1, 0x70, 0x4d, 0x84, 0x5a, 0x42, 0x5e, 0xc9, 0xcb, 0x4b,
++      0x49, 0x21, 0xaa, 0xec, 0x20, 0x2a, 0x27, 0xcc, 0xf4, 0x7a, 0x25, 0x16,
++      0x31, 0x95, 0xbb, 0xd8, 0xce, 0x1c, 0xce, 0x6d, 0xf2, 0xba, 0xde, 0xf6,
++      0x84, 0x10, 0x21, 0x5b, 0x47, 0xcd, 0x84, 0x49, 0xdc, 0xc4, 0xfa, 0x8e,
++      0xb8, 0xcf, 0x75, 0x04, 0xe7, 0x16, 0xc8, 0xe7, 0x08, 0xf9, 0x1c, 0xc6,
++      0x9b, 0xb7, 0x70, 0x9a, 0x5a, 0xeb, 0xe9, 0x27, 0xa7, 0xb3, 0xe1, 0xa1,
++      0x2d, 0xde, 0x6f, 0xf1, 0x71, 0xbf, 0xe4, 0x34, 0xdb, 0xbc, 0x78, 0x21,
++      0x89, 0xcd, 0xc4, 0x47, 0xe6, 0x29, 0x25, 0xeb, 0x90, 0xdb, 0xa9, 0x0a,
++      0x25, 0x4b, 0x17, 0xf5, 0x0d, 0xa7, 0xcf, 0xf0, 0x6d, 0x2f, 0x39, 0xdd,
++      0x17, 0xbe, 0x95, 0xd3, 0x2c, 0xbe, 0xcc, 0xf7, 0x33, 0xf9, 0x83, 0x98,
++      0xf1, 0xf9, 0x11, 0x99, 0xf2, 0x21, 0x30, 0xa5, 0x92, 0x5f, 0x0a, 0xfd,
++      0x41, 0x36, 0x1e, 0x80, 0x91, 0x3e, 0x89, 0x08, 0x12, 0x13, 0x1a, 0xfe,
++      0xaa, 0xc5, 0x87, 0x63, 0x31, 0x23, 0xb3, 0x93, 0x3c, 0x5d, 0x39, 0x37,
++      0xc4, 0x88, 0x8c, 0x68, 0xd4, 0x53, 0xe2, 0xab, 0xaf, 0xd9, 0x0f, 0x6d,
++      0xca, 0xe5, 0xe0, 0x1e, 0x8f, 0x9d, 0x8d, 0x6a, 0x30, 0x76, 0xfd, 0x84,
++      0xb8, 0xb8, 0x30, 0x21, 0x44, 0x67, 0xbb, 0x79, 0xee, 0x23, 0xaf, 0x41,
++      0x2d, 0x54, 0x71, 0x7e, 0xae, 0x34, 0x7e, 0xd5, 0x94, 0x06, 0xff, 0x01,
++      0x77, 0xfc, 0xeb, 0x6f, 0x32, 0x8a, 0xcf, 0xf3, 0x12, 0x9f, 0x42, 0x04,
++      0x6c, 0x33, 0x32, 0x4b, 0x3d, 0xdc, 0x97, 0x34, 0xb8, 0x7f, 0x4d, 0x4e,
++      0x33, 0xbf, 0x7b, 0x92, 0xb1, 0xe8, 0x16, 0xbe, 0x73, 0xa9, 0x58, 0xe2,
++      0x70, 0xbd, 0xb9, 0x15, 0x7f, 0xa3, 0x7b, 0x51, 0x63, 0xfe, 0x10, 0xcf,
++      0xba, 0x1a, 0x45, 0xec, 0x4f, 0x56, 0xa2, 0x91, 0x98, 0x7f, 0x82, 0x98,
++      0xdf, 0x3c, 0x4b, 0xad, 0x99, 0x6a, 0x67, 0x7e, 0x25, 0xdf, 0xbb, 0x94,
++      0xde, 0xd9, 0x1e, 0xd7, 0x57, 0x3d, 0x32, 0xed, 0xc1, 0x9b, 0xd6, 0x5a,
++      0x7a, 0x98, 0xb4, 0xf2, 0xc8, 0xac, 0xc4, 0xfb, 0x3a, 0xe5, 0x41, 0x62,
++      0x3f, 0x7a, 0x87, 0x8a, 0x19, 0x6b, 0xad, 0xe2, 0x77, 0xb1, 0xef, 0x83,
++      0x93, 0x29, 0xe1, 0xde, 0x6b, 0xc7, 0xac, 0x53, 0x4b, 0x70, 0xdf, 0x73,
++      0x1b, 0xaf, 0x23, 0xb5, 0x03, 0x25, 0x7d, 0xd7, 0xbb, 0x98, 0xaf, 0xe7,
++      0xcb, 0xf8, 0x7e, 0x96, 0xed, 0xbe, 0x29, 0x68, 0x95, 0xc4, 0xf0, 0x3a,
++      0x62, 0x7c, 0x92, 0x38, 0x79, 0x78, 0x5a, 0xe0, 0x0d, 0xd6, 0x89, 0x42,
++      0xd2, 0xb0, 0x76, 0x2a, 0x46, 0xba, 0x47, 0x49, 0x64, 0x57, 0x96, 0x6b,
++      0xe4, 0xdd, 0xac, 0x73, 0xb8, 0x43, 0xe0, 0xe7, 0x16, 0xb4, 0x00, 0xb1,
++      0xfd, 0x6f, 0xac, 0x59, 0xff, 0x51, 0xae, 0x91, 0xc9, 0x42, 0x25, 0x42,
++      0x2d, 0xd4, 0x7c, 0x62, 0xb9, 0x9b, 0x58, 0x3e, 0x44, 0x3e, 0x8c, 0xd0,
++      0x13, 0x6c, 0x26, 0x96, 0x57, 0xb4, 0x19, 0xd9, 0x2e, 0xfa, 0x69, 0xcf,
++      0xea, 0x08, 0x71, 0x1a, 0xa7, 0x87, 0x1d, 0x41, 0x07, 0xe7, 0x4a, 0x4f,
++      0x1b, 0x91, 0x0e, 0xe2, 0x5f, 0x65, 0x9f, 0xd7, 0xd8, 0x67, 0xa1, 0x4e,
++      0x7a, 0xed, 0x00, 0x5e, 0x60, 0x1f, 0x33, 0xe9, 0xb8, 0x3a, 0x21, 0xf1,
++      0x3f, 0x86, 0x44, 0x46, 0xe2, 0xdf, 0x59, 0xd6, 0x4a, 0xdf, 0x2f, 0xf1,
++      0x4f, 0x0c, 0xe6, 0x89, 0xc1, 0x12, 0x07, 0x06, 0x24, 0x07, 0x6a, 0xe8,
++      0x2b, 0x4e, 0xd0, 0x57, 0x54, 0xd9, 0x51, 0xe2, 0x5f, 0xf2, 0xa1, 0xe4,
++      0x2d, 0xba, 0xca, 0x1c, 0x58, 0xef, 0xce, 0x27, 0x35, 0x20, 0x88, 0xa6,
++      0x49, 0x43, 0x57, 0x95, 0xff, 0x14, 0x4f, 0x98, 0xe6, 0xfc, 0x76, 0xfa,
++      0x83, 0x2f, 0xdb, 0x62, 0xcc, 0x7b, 0x10, 0xf7, 0x9c, 0x08, 0xa9, 0x12,
++      0xe7, 0xf5, 0x93, 0x41, 0x84, 0x26, 0x25, 0x0f, 0xb2, 0xe3, 0x11, 0x62,
++      0xc4, 0xf2, 0xfc, 0x96, 0xf8, 0x8f, 0x12, 0x17, 0xaa, 0xd2, 0xcd, 0x31,
++      0x6a, 0xa6, 0x74, 0xb4, 0x4e, 0x1a, 0x03, 0x27, 0x70, 0x55, 0xbc, 0x11,
++      0x33, 0x33, 0x7b, 0x99, 0xff, 0x6d, 0xc9, 0x18, 0xf7, 0x4a, 0xc7, 0xdd,
++      0x37, 0xc7, 0x70, 0x39, 0xe1, 0x6c, 0xb1, 0x82, 0x65, 0xaf, 0xad, 0x61,
++      0x4b, 0x1e, 0xd8, 0x96, 0xa7, 0xd9, 0x35, 0x3d, 0xab, 0xfc, 0xb8, 0x86,
++      0xc3, 0x44, 0x7f, 0xbf, 0xee, 0x30, 0xff, 0x01, 0xea, 0x7d, 0xe9, 0x9d,
++      0x92, 0x07, 0xff, 0x79, 0xf9, 0x8c, 0xf9, 0x2b, 0x4f, 0xe9, 0xef, 0xdb,
++      0xde, 0xc5, 0x33, 0xe7, 0x16, 0x62, 0xb0, 0x93, 0x18, 0xec, 0x61, 0x8e,
++      0xb6, 0x5b, 0xe4, 0x36, 0xf3, 0x99, 0x55, 0x03, 0xf4, 0xd4, 0x4d, 0x7d,
++      0xd5, 0xd4, 0xb4, 0x7d, 0xd4, 0xa7, 0x77, 0xcd, 0x4a, 0x7a, 0x70, 0x87,
++      0xda, 0xd9, 0x41, 0xdd, 0xec, 0x52, 0x1e, 0x72, 0xb1, 0x95, 0x26, 0x8e,
++      0x34, 0x25, 0x4d, 0x5f, 0xeb, 0x63, 0xed, 0x38, 0x14, 0x5e, 0xf4, 0xdf,
++      0x32, 0x4e, 0xe9, 0xb9, 0x8d, 0xb8, 0x2c, 0xbf, 0xcf, 0xba, 0x3a, 0xb4,
++      0x16, 0xaa, 0xbd, 0x56, 0x51, 0x6d, 0x79, 0xc6, 0x50, 0xf1, 0x03, 0xea,
++      0xec, 0xc2, 0x26, 0x79, 0xd6, 0xe0, 0xba, 0xd8, 0x16, 0x31, 0x63, 0xd1,
++      0x83, 0xc4, 0xd5, 0xab, 0xdf, 0x39, 0x7b, 0x94, 0xf0, 0x36, 0x9c, 0x57,
++      0x6f, 0xfa, 0x68, 0xa9, 0x0f, 0x6b, 0x6f, 0xe2, 0x4d, 0xc3, 0x33, 0x2d,
++      0x51, 0xe2, 0x51, 0x62, 0x4d, 0x43, 0xe1, 0x95, 0x4a, 0xbc, 0xf1, 0x4a,
++      0x10, 0xaf, 0xbf, 0x22, 0xc4, 0x68, 0x12, 0x3c, 0xe1, 0x08, 0xf1, 0x50,
++      0x72, 0x0d, 0x8e, 0xeb, 0xb1, 0xe8, 0x0b, 0xae, 0x8f, 0x75, 0xe8, 0x63,
++      0x8d, 0x81, 0xb3, 0xb8, 0x21, 0x0a, 0x2e, 0xa7, 0x13, 0xe4, 0x5b, 0x09,
++      0x8b, 0xae, 0xdf, 0xad, 0xd5, 0x70, 0x81, 0xf8, 0x0b, 0x11, 0x7f, 0xbf,
++      0xa3, 0xe6, 0x5e, 0x2d, 0x6b, 0xee, 0xaa, 0x02, 0xf9, 0xd8, 0x16, 0x40,
++      0x8f, 0x5c, 0x0b, 0x71, 0x38, 0x7c, 0x13, 0x87, 0xac, 0xbd, 0xdc, 0xf3,
++      0xb3, 0x96, 0x11, 0xef, 0x24, 0x1e, 0x67, 0x2c, 0xc3, 0xe9, 0xa0, 0x9f,
++      0x1d, 0x76, 0x31, 0x49, 0xed, 0x8d, 0x49, 0x5c, 0x12, 0x87, 0xcc, 0xc9,
++      0x3e, 0xf6, 0x39, 0xcd, 0x3e, 0x63, 0x65, 0x3f, 0xfb, 0x1e, 0x12, 0x69,
++      0xe9, 0x67, 0xa3, 0xc4, 0xe0, 0x3e, 0xd7, 0xcf, 0x4a, 0xff, 0x2a, 0xbd,
++      0xab, 0x8c, 0xb3, 0xdd, 0x8d, 0xb3, 0xfb, 0x26, 0x0e, 0xa9, 0x61, 0xb5,
++      0x12, 0x7f, 0x0f, 0x60, 0xec, 0xa5, 0x1a, 0x84, 0xcc, 0x3b, 0x71, 0x3e,
++      0xf3, 0x80, 0x1a, 0x31, 0xa1, 0xd7, 0xdb, 0x25, 0x3c, 0x6e, 0x2e, 0xa6,
++      0x90, 0xcf, 0xbf, 0x23, 0xf2, 0x61, 0xc3, 0x39, 0xeb, 0x7a, 0xd2, 0x01,
++      0x7a, 0xc4, 0x1b, 0xc2, 0x13, 0x33, 0xce, 0x6d, 0xa1, 0x2f, 0x6b, 0xf2,
++      0x96, 0xfc, 0xdd, 0x9a, 0xc2, 0xfb, 0x02, 0x75, 0xa5, 0x75, 0xaa, 0xf4,
++      0x74, 0x23, 0xe4, 0xdc, 0xa8, 0x59, 0xf2, 0x77, 0xb1, 0xc2, 0xa7, 0xaa,
++      0xd4, 0x73, 0x4f, 0x9b, 0x1c, 0x37, 0x4d, 0x0d, 0x59, 0x1c, 0xfb, 0x1b,
++      0x5d, 0x1e, 0x21, 0x06, 0x87, 0xa5, 0xd7, 0xa2, 0x2f, 0xe1, 0x59, 0x7d,
++      0x89, 0xa6, 0xee, 0xf6, 0xc2, 0x94, 0x6d, 0x8e, 0xf2, 0x10, 0xd7, 0xa0,
++      0x99, 0x83, 0x4a, 0x9a, 0xb5, 0x79, 0x2f, 0xf1, 0xd5, 0xc3, 0x1a, 0x7c,
++      0xd9, 0x6a, 0x26, 0x87, 0x05, 0xeb, 0xd0, 0x0d, 0xb1, 0xcf, 0x5c, 0x3c,
++      0xd3, 0xc9, 0xf3, 0x5c, 0x9c, 0x71, 0x57, 0xb3, 0x76, 0xaf, 0x63, 0xbd,
++      0xe6, 0x69, 0x91, 0x39, 0xfd, 0x32, 0x26, 0x1a, 0x57, 0xb5, 0x19, 0x03,
++      0x1b, 0xbd, 0x01, 0xe4, 0x88, 0xf7, 0x57, 0x59, 0x83, 0xf2, 0xdc, 0xd3,
++      0xc9, 0xa2, 0x91, 0xca, 0x62, 0x04, 0x1b, 0xb9, 0xa7, 0x3c, 0x03, 0x39,
++      0xff, 0x18, 0x2b, 0x9d, 0x91, 0xb7, 0xb3, 0xb6, 0x8d, 0x97, 0xb9, 0x7d,
++      0x05, 0x09, 0x4b, 0x72, 0x7b, 0x9e, 0xb5, 0x6d, 0xdc, 0xe5, 0xb6, 0x91,
++      0x92, 0x7c, 0xae, 0x28, 0xd7, 0xb4, 0x4f, 0x20, 0x39, 0x7c, 0x6b, 0x3d,
++      0x93, 0x78, 0x5e, 0xeb, 0x93, 0xde, 0x36, 0x9f, 0x97, 0x35, 0x49, 0xd6,
++      0xa2, 0xc5, 0xba, 0xa4, 0xc9, 0xfb, 0x84, 0x4c, 0xe3, 0xc4, 0x1e, 0xe1,
++      0x29, 0xdd, 0x49, 0x9c, 0xfb, 0xd0, 0x1b, 0x4c, 0xa5, 0xee, 0x43, 0x26,
++      0x32, 0xa7, 0x61, 0x53, 0xbe, 0xa1, 0x2f, 0x60, 0x83, 0xef, 0x28, 0xb0,
++      0xfe, 0x44, 0x43, 0xe6, 0x96, 0x3b, 0x89, 0x8f, 0x73, 0x9a, 0x16, 0x9a,
++      0x58, 0x2e, 0xdf, 0xc1, 0x67, 0xb9, 0xdb, 0xde, 0x49, 0xa4, 0x7f, 0xdf,
++      0x9d, 0xc4, 0x0b, 0xe4, 0xc7, 0x58, 0xe9, 0x4e, 0xc2, 0xf9, 0x5e, 0x8b,
++      0x17, 0x33, 0x61, 0xec, 0xfe, 0xa8, 0x5d, 0xc5, 0xe5, 0x9c, 0x11, 0x39,
++      0x8e, 0xdd, 0xe8, 0x77, 0xef, 0x1f, 0x90, 0xf5, 0xdb, 0xbb, 0xf0, 0x4f,
++      0xed, 0xf2, 0xfe, 0x21, 0x25, 0xd7, 0x38, 0xce, 0xe5, 0x43, 0xa3, 0xde,
++      0xac, 0x67, 0x2d, 0xd8, 0xb1, 0x46, 0xc1, 0x43, 0xc9, 0x3b, 0x5d, 0x6c,
++      0x8f, 0x17, 0x8d, 0x74, 0x94, 0xcf, 0xee, 0x99, 0x90, 0x35, 0xf2, 0x71,
++      0x9e, 0x17, 0xa1, 0x35, 0xda, 0xbd, 0xaa, 0xc8, 0x37, 0x45, 0xae, 0x28,
++      0x86, 0x73, 0x18, 0xf2, 0x8e, 0x20, 0x71, 0xce, 0xab, 0x18, 0xf3, 0x1f,
++      0x7a, 0x8d, 0x54, 0xbd, 0x8b, 0x99, 0xc7, 0x79, 0x76, 0x93, 0x7f, 0x7b,
++      0xe5, 0xb9, 0x0f, 0x1b, 0x39, 0xe6, 0x07, 0x6b, 0xe4, 0x59, 0xf4, 0x73,
++      0x91, 0x5d, 0x66, 0x38, 0x0b, 0x8a, 0xc6, 0xdc, 0x80, 0xfa, 0x24, 0x35,
++      0xfc, 0x71, 0x6a, 0xb8, 0xf4, 0x2c, 0xbd, 0xf4, 0x2c, 0x4d, 0xf3, 0x71,
++      0xaf, 0x91, 0xb9, 0x4e, 0xbd, 0xe3, 0x98, 0x7d, 0xbd, 0x8a, 0xd1, 0x7b,
++      0x82, 0xfa, 0xbf, 0x53, 0x29, 0x8d, 0xb9, 0xb2, 0x3c, 0xe6, 0xdd, 0x05,
++      0x4d, 0xe9, 0xcc, 0x83, 0xba, 0x83, 0xe8, 0x36, 0x8b, 0xda, 0x51, 0xac,
++      0x24, 0xc7, 0x4c, 0xb9, 0x66, 0xc6, 0xd6, 0xca, 0xd8, 0x14, 0x5c, 0x69,
++      0x91, 0xef, 0xb6, 0xca, 0x38, 0x9c, 0x2a, 0x3b, 0x45, 0xed, 0x7d, 0xc5,
++      0x57, 0xd6, 0x2f, 0xcf, 0x16, 0x6b, 0x19, 0x9c, 0x30, 0x42, 0x3e, 0xb3,
++      0x0e, 0xa3, 0xb4, 0x81, 0x41, 0xb3, 0x19, 0x39, 0xdd, 0x8f, 0x2d, 0xd6,
++      0x17, 0x82, 0x3a, 0xc9, 0xf7, 0x81, 0xa7, 0x5e, 0xe2, 0x19, 0xde, 0xbc,
++      0x86, 0x58, 0xf2, 0x39, 0x1c, 0xd3, 0x77, 0xd1, 0x0f, 0x6e, 0xc5, 0xeb,
++      0xae, 0x9e, 0xd8, 0xc4, 0xb3, 0x42, 0x0c, 0xd9, 0xb2, 0xd6, 0xdd, 0x32,
++      0xb6, 0xbc, 0x93, 0xb8, 0x24, 0xb2, 0xa5, 0x31, 0x9c, 0x6d, 0x56, 0x86,
++      0x71, 0x7d, 0xa3, 0xbb, 0x3b, 0xa8, 0xbb, 0x15, 0xa6, 0xe7, 0xae, 0x4a,
++      0xea, 0xee, 0x56, 0xeb, 0xcf, 0xf1, 0x14, 0x39, 0x5e, 0x65, 0x7e, 0x26,
++      0x9e, 0x0e, 0xcb, 0x31, 0xa9, 0xaf, 0x35, 0x4b, 0xc7, 0xff, 0x90, 0x63,
++      0xca, 0x39, 0x64, 0x3d, 0x3c, 0x2f, 0x0e, 0xd5, 0xca, 0x31, 0x07, 0x95,
++      0x8d, 0xe4, 0xd4, 0x3c, 0x4b, 0xef, 0x0f, 0xc8, 0xa7, 0x05, 0xe6, 0xa7,
++      0xf1, 0x36, 0x7c, 0x6a, 0x24, 0x9f, 0x9e, 0x58, 0xc2, 0xa7, 0x83, 0x79,
++      0xe9, 0xbd, 0x14, 0xb4, 0xb4, 0xfd, 0x29, 0x75, 0x45, 0x08, 0x7f, 0xdb,
++      0x0d, 0x71, 0xc6, 0xf5, 0xbe, 0xd2, 0xef, 0xa6, 0x95, 0xee, 0x59, 0xa9,
++      0x4f, 0xd5, 0x08, 0x92, 0x4f, 0x1b, 0xc8, 0xa7, 0x7e, 0xf2, 0xe9, 0x69,
++      0x53, 0x34, 0xee, 0x48, 0x1a, 0xa9, 0x79, 0xfa, 0x9a, 0x75, 0xe4, 0xd4,
++      0x3b, 0xe4, 0xd4, 0x48, 0xb1, 0xa4, 0x53, 0xfb, 0xb8, 0xee, 0xfb, 0xa9,
++      0x53, 0xeb, 0x8a, 0x52, 0xdb, 0x1c, 0xe2, 0x3f, 0x80, 0xcf, 0xc9, 0xa9,
++      0xd9, 0xa4, 0xab, 0x53, 0xd6, 0xef, 0x90, 0xd8, 0x75, 0x5a, 0xf2, 0x89,
++      0x3a, 0x95, 0x2f, 0x36, 0x59, 0xa7, 0xb9, 0xa6, 0xf1, 0xbc, 0x71, 0xbd,
++      0x87, 0x9c, 0xf2, 0xb5, 0x1b, 0xe7, 0x2e, 0x13, 0xbb, 0x81, 0x18, 0xf4,
++      0x88, 0x2d, 0xd7, 0xc4, 0x1a, 0xcb, 0x3a, 0x79, 0x90, 0xf8, 0xef, 0xa1,
++      0x66, 0xf4, 0x16, 0x6d, 0xec, 0x2d, 0x2e, 0xdd, 0x53, 0xd6, 0xa1, 0xdb,
++      0xee, 0xcb, 0xb8, 0xff, 0xf6, 0xed, 0xac, 0x57, 0xb7, 0x6d, 0x97, 0x7c,
++      0x5d, 0xe6, 0x97, 0x7c, 0x1d, 0xce, 0xbf, 0xa6, 0xde, 0xfe, 0x1d, 0x79,
++      0xa7, 0x26, 0xc4, 0x51, 0x4b, 0xde, 0x49, 0x48, 0xdf, 0xa3, 0x60, 0xc8,
++      0x92, 0xf7, 0x6a, 0x1d, 0x51, 0x15, 0x46, 0xe4, 0xfb, 0xf8, 0x4a, 0x64,
++      0xc3, 0x4e, 0xdc, 0xe7, 0xd6, 0x48, 0x43, 0xef, 0x63, 0xad, 0x9b, 0x2f,
++      0x9f, 0xfd, 0x66, 0x78, 0x3e, 0x7b, 0x87, 0x75, 0xea, 0x28, 0xcf, 0x79,
++      0x43, 0x85, 0xaf, 0xc4, 0x7c, 0x58, 0xc5, 0x88, 0x79, 0xf3, 0x8e, 0xd2,
++      0xd5, 0xb1, 0xc3, 0x7c, 0x36, 0x56, 0x58, 0xac, 0x51, 0xd4, 0x4c, 0x53,
++      0x88, 0xad, 0xe6, 0x7f, 0x8b, 0x2d, 0xdf, 0x7a, 0x57, 0x88, 0x49, 0xc6,
++      0x70, 0xc1, 0xc2, 0x6e, 0x1f, 0x62, 0x7d, 0xd7, 0x59, 0xd7, 0x3f, 0x58,
++      0x63, 0x64, 0x0a, 0x4a, 0xa2, 0x77, 0x83, 0x22, 0xbd, 0x9e, 0xa7, 0xab,
++      0x82, 0xef, 0xb4, 0xd0, 0x1b, 0x5d, 0x61, 0x06, 0xfd, 0xfc, 0x7e, 0xc6,
++      0x32, 0x22, 0x47, 0xf8, 0x77, 0x4b, 0x4a, 0x8e, 0x21, 0x44, 0x87, 0x25,
++      0xef, 0xbb, 0x46, 0xd4, 0xdc, 0x44, 0x56, 0x54, 0x99, 0x17, 0xa8, 0x4d,
++      0x46, 0x66, 0x44, 0x91, 0x3e, 0x3b, 0x0a, 0x57, 0x67, 0xf9, 0x4c, 0x9b,
++      0x88, 0xe0, 0xef, 0x5d, 0xff, 0x1c, 0xa5, 0x66, 0x35, 0xe0, 0x1f, 0x5c,
++      0xdd, 0x52, 0xb1, 0xed, 0x25, 0x23, 0xa5, 0x2a, 0x7b, 0x70, 0xc9, 0x32,
++      0xf4, 0x9f, 0x32, 0x6e, 0x6a, 0xcd, 0x8b, 0x9d, 0x3c, 0x3f, 0x71, 0x8e,
++      0x6c, 0x9f, 0xb7, 0x56, 0xd1, 0x58, 0x3b, 0x7e, 0xdc, 0x22, 0x6b, 0xf7,
++      0x2e, 0xf4, 0x34, 0xef, 0xe4, 0x47, 0x45, 0xdd, 0x94, 0xaa, 0x6c, 0xa2,
++      0x27, 0x09, 0x4d, 0x85, 0xb0, 0x7d, 0xb5, 0x10, 0xab, 0x56, 0x3b, 0xf8,
++      0x3c, 0xd9, 0x14, 0x3f, 0xcb, 0x1a, 0x74, 0xa8, 0xd6, 0x48, 0x03, 0xbf,
++      0xc0, 0x66, 0x7a, 0xd9, 0x54, 0x5b, 0x0e, 0xb8, 0x53, 0xae, 0xf1, 0x17,
++      0xe8, 0x94, 0x1e, 0xd8, 0x0a, 0x49, 0xbf, 0xe5, 0xe2, 0xb7, 0x74, 0xaf,
++      0xc4, 0xd4, 0x1d, 0xc8, 0x8a, 0x4a, 0xd3, 0xe8, 0x9b, 0x65, 0xbd, 0xfd,
++      0x20, 0xb6, 0x5c, 0x7f, 0x78, 0x56, 0x7a, 0x60, 0x33, 0xba, 0x5e, 0x11,
++      0xcc, 0xc5, 0xf3, 0xcc, 0x45, 0xcc, 0x09, 0xd2, 0x32, 0xf0, 0xac, 0xe5,
++      0x84, 0x94, 0x41, 0xe5, 0x51, 0xf2, 0xa1, 0xcf, 0x5f, 0x49, 0x0f, 0xe1,
++      0xd0, 0x3f, 0x78, 0x50, 0x7d, 0x40, 0x7a, 0x8a, 0x00, 0xb5, 0xa6, 0xa9,
++      0x37, 0xc8, 0xfc, 0xec, 0x48, 0x4a, 0xff, 0x41, 0xac, 0x1f, 0xb8, 0x21,
++      0x3a, 0xe9, 0x71, 0x3b, 0xcb, 0x1e, 0xf7, 0x89, 0xe9, 0x34, 0x3d, 0xb0,
++      0xa6, 0xc8, 0x3b, 0xb6, 0x54, 0x1b, 0x0f, 0xa4, 0x8f, 0x4a, 0x1f, 0x22,
++      0xd7, 0xa0, 0xe3, 0x6a, 0x52, 0x62, 0x57, 0xc7, 0x70, 0xbb, 0x11, 0xc9,
++      0x42, 0xde, 0xe9, 0xdc, 0xea, 0x2f, 0xa0, 0xa7, 0xbf, 0xe3, 0x39, 0xa0,
++      0x6f, 0x62, 0x2c, 0x86, 0x5f, 0x88, 0xba, 0xa4, 0x17, 0x7d, 0xee, 0x59,
++      0x2e, 0xa2, 0xa7, 0xc9, 0xfb, 0x73, 0xf4, 0x09, 0x5e, 0x9e, 0x99, 0xf7,
++      0x10, 0x4b, 0x5f, 0xb6, 0x0c, 0xbd, 0x5a, 0x8f, 0xec, 0x78, 0x1d, 0xcf,
++      0xa8, 0xf7, 0x53, 0x57, 0x2f, 0xe4, 0x1e, 0x65, 0x3d, 0xf7, 0xb4, 0x47,
++      0x78, 0x06, 0x68, 0x9c, 0xca, 0x8a, 0x7a, 0xfa, 0x41, 0x9e, 0x97, 0x51,
++      0xdb, 0x16, 0xa7, 0xdf, 0x5e, 0xdc, 0x2b, 0x0f, 0x7e, 0x68, 0x99, 0x70,
++      0xdc, 0xdf, 0x41, 0xbd, 0x7b, 0x9a, 0xe7, 0x68, 0x73, 0xb9, 0xde, 0x51,
++      0x8a, 0x4b, 0xad, 0xb0, 0x2d, 0xb4, 0xdc, 0x0b, 0xfd, 0xc1, 0xdb, 0xc4,
++      0xb4, 0x4e, 0x7a, 0x1f, 0x5f, 0xa9, 0xdf, 0x9f, 0x4d, 0x37, 0xe8, 0x8f,
++      0xb0, 0xde, 0xcd, 0x13, 0x2b, 0x4f, 0xac, 0xb6, 0x64, 0x2c, 0xf3, 0x32,
++      0x16, 0xfa, 0x4b, 0xe7, 0x7e, 0x0f, 0x7d, 0x49, 0x12, 0x08, 0xcd, 0xfd,
++      0x35, 0x79, 0xe5, 0x69, 0x0d, 0x21, 0xbb, 0x8b, 0x31, 0xbe, 0xfa, 0xaf,
++      0xdc, 0x9a, 0xfe, 0x49, 0xf4, 0x7b, 0xd8, 0x67, 0xc2, 0x02, 0x9e, 0x39,
++      0x01, 0x3c, 0x3d, 0x19, 0xa3, 0x2f, 0xa7, 0x8f, 0x3c, 0xa1, 0xe1, 0xfb,
++      0xd3, 0x95, 0xf8, 0xd1, 0x74, 0x10, 0x3b, 0xa6, 0xdd, 0xbb, 0xae, 0x0d,
++      0x75, 0x7c, 0xaf, 0x83, 0x67, 0xbb, 0x59, 0x6b, 0x35, 0x3e, 0xa2, 0x87,
++      0x5a, 0xa1, 0x78, 0x10, 0x39, 0x00, 0x5d, 0x27, 0x6e, 0x6a, 0x5b, 0x7e,
++      0x44, 0x2e, 0x0b, 0x61, 0xae, 0x96, 0x3a, 0xf9, 0xbc, 0xfb, 0x7d, 0x84,
++      0xfe, 0x31, 0x23, 0x31, 0x98, 0x27, 0x06, 0xf3, 0xc4, 0xe4, 0x4d, 0x4f,
++      0x2d, 0xb1, 0x1c, 0xa7, 0x8f, 0x7e, 0x4e, 0x94, 0xb0, 0xf1, 0xb5, 0x38,
++      0x6a, 0x9e, 0x24, 0x7f, 0x55, 0x6a, 0x28, 0xf0, 0xcf, 0xb9, 0x88, 0xbe,
++      0xa9, 0x28, 0xf3, 0xff, 0xb7, 0xe5, 0xfc, 0x9f, 0xf1, 0x97, 0xf4, 0xc2,
++      0x70, 0x66, 0xd1, 0x80, 0xc9, 0x7c, 0x83, 0xbe, 0x21, 0x3f, 0x34, 0xa8,
++      0x21, 0x1b, 0x0d, 0xc1, 0x18, 0x98, 0x84, 0xa7, 0x35, 0x08, 0xb9, 0x76,
++      0xa0, 0xe0, 0xae, 0x51, 0x88, 0x31, 0xea, 0x9b, 0xcc, 0xc1, 0xbf, 0xe7,
++      0xd0, 0xea, 0x61, 0x3e, 0x1c, 0xc8, 0xb3, 0x35, 0xf0, 0x69, 0x41, 0xde,
++      0x7d, 0xc6, 0xd2, 0xdd, 0xf8, 0xc2, 0x1d, 0xf3, 0x93, 0x42, 0x0a, 0xfb,
++      0xf3, 0x1f, 0x88, 0xfd, 0xe1, 0x92, 0xc6, 0xa7, 0x79, 0x3e, 0x0a, 0x1d,
++      0x28, 0x7b, 0x21, 0x72, 0xb8, 0x9a, 0xeb, 0xbd, 0x9a, 0x74, 0xbd, 0x3f,
++      0x6b, 0xe4, 0x80, 0x7a, 0xd4, 0x64, 0xb1, 0xab, 0xb9, 0x21, 0xc6, 0x62,
++      0x89, 0x40, 0x29, 0xa6, 0x84, 0x7e, 0x04, 0x15, 0xc4, 0xae, 0x3c, 0x23,
++      0x49, 0xfd, 0x90, 0xbf, 0x79, 0x3e, 0x51, 0x9d, 0x88, 0x97, 0xeb, 0x72,
++      0x1e, 0x93, 0x6d, 0x81, 0xb2, 0x5f, 0x5d, 0xf4, 0x22, 0x1d, 0x7c, 0x26,
++      0xbd, 0xc8, 0x57, 0xa2, 0x2f, 0xdc, 0x71, 0x53, 0x73, 0xb2, 0x7c, 0x63,
++      0x34, 0x2f, 0xef, 0xb4, 0x5a, 0xe8, 0x88, 0x15, 0x9c, 0x62, 0xe4, 0x47,
++      0x5a, 0x63, 0xfa, 0x30, 0xc7, 0x73, 0x74, 0x9d, 0x5c, 0xde, 0x43, 0xbf,
++      0xcc, 0x77, 0x8a, 0x2d, 0xec, 0x23, 0xb5, 0xec, 0x2f, 0xb8, 0xd6, 0x2f,
++      0x9a, 0x25, 0xb6, 0x87, 0xf3, 0x6f, 0x79, 0x54, 0x53, 0xae, 0x33, 0x91,
++      0x1a, 0x66, 0x3c, 0x0b, 0xba, 0xf4, 0xd6, 0x0e, 0xb5, 0x2d, 0xe1, 0xf6,
++      0xcf, 0xaa, 0x32, 0x0e, 0x37, 0x1e, 0xb6, 0x49, 0xcd, 0x32, 0x32, 0xa7,
++      0x90, 0x70, 0xfa, 0xa5, 0x39, 0x58, 0x26, 0x63, 0x68, 0x8a, 0xf4, 0x33,
++      0x9e, 0x43, 0x61, 0x57, 0x0f, 0xf9, 0x8c, 0xf3, 0xe5, 0x3d, 0x1b, 0x2a,
++      0x21, 0xb0, 0x22, 0xe9, 0x9e, 0xf9, 0xcb, 0xff, 0x5f, 0x43, 0xa5, 0x0f,
++      0x91, 0x58, 0xfc, 0x5f, 0x69, 0xd7, 0x8a, 0xc0, 0xa8, 0x1a, 0x00, 0x00,
++      0x00 };
+ static const u32 bnx2_TPAT_b06FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x0 };
+ static struct fw_info bnx2_tpat_fw_06 = {
+-      /* Firmware version: 4.6.16 */
++      /* Firmware version: 4.4.22 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0x10,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x16,
+       .start_addr                     = 0x08000488,
+       .text_addr                      = 0x08000400,
+-      .text_len                       = 0x175c,
++      .text_len                       = 0x1aa4,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_TPAT_b06FwText,
+       .gz_text_len                    = sizeof(bnx2_TPAT_b06FwText),
+@@ -3540,11 +3639,11 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_TPAT_b06FwData,
+-      .sbss_addr                      = 0x08001b80,
++      .sbss_addr                      = 0x08001ec0,
+       .sbss_len                       = 0x44,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08001bc4,
++      .bss_addr                       = 0x08001f04,
+       .bss_len                        = 0x450,
+       .bss_index                      = 0x0,
+@@ -3571,858 +3670,862 @@
+ };
+ static u8 bnx2_TXP_b06FwText[] = {
+-      0xad, 0x7b, 0x0f, 0x70, 0x54, 0xe7, 0x75, 0xef, 0xef, 0xee, 0x1f, 0x69,
+-      0x57, 0x5a, 0xad, 0x2e, 0x78, 0xc1, 0xab, 0x54, 0x29, 0x7b, 0xd9, 0xbb,
+-      0xd2, 0x1a, 0x09, 0xb8, 0x0b, 0xc2, 0x88, 0xe8, 0xd6, 0x6c, 0x85, 0x00,
+-      0x21, 0x64, 0x2c, 0x63, 0x25, 0x15, 0x7d, 0x9e, 0x5a, 0x0f, 0x64, 0x23,
+-      0xdb, 0xd8, 0x16, 0x35, 0x6d, 0xe5, 0xd4, 0xad, 0xd6, 0x92, 0xc0, 0xc2,
+-      0xac, 0xb8, 0x22, 0x0b, 0x11, 0xee, 0xf4, 0xbd, 0xc8, 0x96, 0xb0, 0xb0,
+-      0xb3, 0x62, 0xed, 0xa4, 0xaf, 0xd3, 0xcc, 0x34, 0xe3, 0x7d, 0xfe, 0x83,
+-      0x49, 0x1e, 0xb6, 0xd3, 0x4e, 0xe7, 0x3d, 0xa7, 0xf3, 0xde, 0x84, 0x17,
+-      0x63, 0x62, 0xa7, 0x89, 0xed, 0xe6, 0xa5, 0xf3, 0x44, 0xea, 0xf8, 0xbe,
+-      0xdf, 0xb9, 0x77, 0x17, 0x88, 0x9b, 0x4e, 0x67, 0x3a, 0x4f, 0x33, 0x9a,
+-      0xd5, 0xde, 0x3f, 0xdf, 0x77, 0xce, 0xf9, 0xce, 0xf9, 0x9d, 0xdf, 0x39,
+-      0xdf, 0xa7, 0x06, 0xa0, 0x0a, 0xa5, 0x9f, 0x1a, 0xfe, 0xb6, 0x0c, 0x0d,
+-      0x1f, 0x4a, 0xad, 0xb9, 0x75, 0x0d, 0xff, 0xbc, 0x15, 0x6a, 0x85, 0x4f,
+-      0x6e, 0xde, 0xaa, 0x00, 0xfd, 0x3f, 0xc6, 0xbf, 0xeb, 0xe7, 0xf3, 0xff,
+-      0xbe, 0xd7, 0x9c, 0x1f, 0x2f, 0xa0, 0x96, 0xe5, 0x92, 0x5f, 0x04, 0x3c,
+-      0xe6, 0xcc, 0x17, 0xda, 0x75, 0x04, 0xbc, 0x66, 0xaf, 0xb9, 0x4f, 0x07,
+-      0xd2, 0xf9, 0xa6, 0xd8, 0x16, 0xfc, 0xd2, 0xce, 0x44, 0x7c, 0x90, 0xeb,
+-      0x9f, 0x37, 0x3f, 0x19, 0xf9, 0xf6, 0x46, 0xed, 0xe3, 0x19, 0x2f, 0x02,
+-      0xaa, 0x79, 0x1a, 0x6a, 0x03, 0x02, 0xf5, 0x7c, 0xe7, 0xcf, 0x1b, 0xfd,
+-      0x5e, 0x84, 0xcb, 0x63, 0xb5, 0x62, 0xcc, 0x42, 0x26, 0x60, 0x0e, 0xa1,
+-      0x72, 0x03, 0xf0, 0x5e, 0x36, 0x61, 0x8c, 0x01, 0x53, 0x1e, 0x33, 0x11,
+-      0x7b, 0x05, 0x06, 0x0e, 0x17, 0x62, 0xe8, 0xe0, 0xef, 0x0e, 0xeb, 0x53,
+-      0x3b, 0xe6, 0x47, 0xc6, 0xcb, 0xe7, 0xf6, 0xb6, 0x00, 0x5b, 0xb3, 0x06,
+-      0x8e, 0x58, 0x08, 0xd4, 0x99, 0x8f, 0x63, 0x13, 0x3f, 0xc3, 0xe6, 0x30,
+-      0xde, 0x9a, 0x8c, 0xc7, 0x9e, 0x83, 0xd6, 0xa7, 0x7b, 0xb5, 0x61, 0xa0,
+-      0x69, 0x70, 0x40, 0xd1, 0xfa, 0xdf, 0x56, 0xb4, 0x9e, 0x49, 0x05, 0x01,
+-      0x85, 0xcf, 0x35, 0xe5, 0xe5, 0x73, 0x18, 0xab, 0xf2, 0x01, 0x5c, 0xf2,
+-      0xca, 0xfc, 0xbf, 0x45, 0x7b, 0x2b, 0xf0, 0xe9, 0xad, 0x18, 0xa7, 0x0c,
+-      0x7e, 0x53, 0xc1, 0xb3, 0x2d, 0x89, 0xe8, 0x28, 0xe4, 0x7e, 0x0c, 0x5b,
+-      0x0a, 0xf2, 0xa9, 0x51, 0x6b, 0xdb, 0x1e, 0x37, 0x6c, 0xfb, 0x8c, 0x51,
+-      0x89, 0x8c, 0xaa, 0x45, 0x01, 0x05, 0xa3, 0x86, 0x07, 0x69, 0xb5, 0x3d,
+-      0xe6, 0x83, 0x16, 0xbd, 0x17, 0xff, 0x4c, 0x9d, 0xd3, 0x49, 0x3f, 0xdc,
+-      0xe7, 0xfb, 0x51, 0x89, 0xa2, 0xea, 0x5a, 0xed, 0xd9, 0xac, 0x6d, 0x9f,
+-      0xd7, 0x7d, 0x38, 0x43, 0xfb, 0x8c, 0xe6, 0xff, 0xd9, 0x2e, 0xd2, 0x36,
+-      0xe3, 0x7a, 0x79, 0xfe, 0x00, 0x66, 0x54, 0xdb, 0x9e, 0xe5, 0xbd, 0x23,
+-      0xf9, 0xb2, 0x9d, 0x6d, 0xdb, 0xa3, 0xdb, 0xf6, 0x3e, 0xfd, 0x17, 0xf6,
+-      0xde, 0x5f, 0x79, 0xd6, 0xb6, 0x9f, 0x32, 0x6e, 0xc2, 0xd9, 0x5c, 0x87,
+-      0xd2, 0x35, 0xbf, 0x3c, 0xbc, 0x63, 0xda, 0xc6, 0x79, 0x03, 0xaa, 0xc7,
+-      0xdc, 0xa6, 0xec, 0x98, 0xef, 0x54, 0xb6, 0x16, 0x76, 0x2b, 0xdb, 0x66,
+-      0x7f, 0x57, 0xe9, 0x9c, 0xef, 0x57, 0xb6, 0x17, 0xa2, 0x98, 0xb3, 0x22,
+-      0x98, 0xb5, 0xfa, 0x94, 0x8e, 0xf9, 0x5e, 0xc5, 0xd5, 0x63, 0x58, 0x69,
+-      0x2f, 0x94, 0xc7, 0xba, 0x6e, 0xc7, 0x1d, 0x59, 0x13, 0x13, 0x56, 0x25,
+-      0xe7, 0x59, 0xb4, 0xbf, 0xdd, 0xb8, 0x48, 0x3d, 0x0d, 0x1c, 0x2d, 0x3c,
+-      0x85, 0xdb, 0xa7, 0x6d, 0x3b, 0x9f, 0x02, 0xf2, 0x05, 0xe0, 0xeb, 0x56,
+-      0xbc, 0x67, 0x50, 0xb1, 0xed, 0xed, 0x09, 0x7b, 0xc5, 0x15, 0xa3, 0x29,
+-      0xf9, 0x1a, 0xfe, 0xaf, 0x3d, 0x13, 0x41, 0x26, 0xc4, 0x31, 0x8e, 0x71,
+-      0xcd, 0x1e, 0x98, 0x44, 0xa0, 0xd2, 0x1c, 0xc7, 0x8f, 0xb2, 0x08, 0x54,
+-      0x98, 0x19, 0x9c, 0xcf, 0x8e, 0xaa, 0x01, 0xc4, 0xa3, 0x3b, 0x94, 0xcc,
+-      0xb0, 0x07, 0xda, 0xd0, 0xbb, 0xd0, 0x62, 0x5c, 0x8f, 0x0b, 0xaf, 0x2a,
+-      0x5a, 0xf1, 0x35, 0x68, 0xe9, 0x5f, 0x28, 0x5a, 0x67, 0x9d, 0x17, 0x69,
+-      0x4f, 0x22, 0x80, 0x6f, 0x37, 0xca, 0x9a, 0x8c, 0x63, 0x8d, 0xb3, 0x36,
+-      0x19, 0xdc, 0x72, 0x6d, 0x6d, 0x4c, 0x8c, 0x52, 0xae, 0x23, 0x94, 0xeb,
+-      0x75, 0x43, 0x8b, 0x3e, 0x0b, 0x7b, 0xc5, 0x80, 0x21, 0xf7, 0x4c, 0x8c,
+-      0x17, 0xec, 0x58, 0xd8, 0xbc, 0x44, 0x79, 0x91, 0xf9, 0x9c, 0x19, 0xc8,
+-      0xd4, 0x9a, 0xbf, 0xb4, 0xdf, 0xdc, 0x10, 0xc5, 0xcb, 0x85, 0x08, 0x5e,
+-      0x2a, 0xa8, 0x78, 0xb1, 0xd0, 0x01, 0xab, 0x80, 0xf0, 0xed, 0x85, 0x5f,
+-      0xe7, 0xc7, 0x36, 0x42, 0x7c, 0x9e, 0x72, 0x87, 0x77, 0x16, 0x7c, 0xfd,
+-      0x15, 0x26, 0x7a, 0xbe, 0x93, 0x1d, 0xb1, 0xab, 0x74, 0xf4, 0x2f, 0x31,
+-      0xf5, 0xf4, 0x2a, 0x25, 0xd4, 0x4a, 0x3f, 0xec, 0x79, 0x23, 0xdf, 0xea,
+-      0xd3, 0x8f, 0x07, 0xe1, 0xa7, 0xfd, 0xb7, 0x16, 0x6c, 0x7b, 0xcc, 0x38,
+-      0xb8, 0x76, 0x6f, 0xeb, 0x37, 0x8b, 0x3d, 0x7a, 0x37, 0x32, 0x85, 0x01,
+-      0x20, 0x6c, 0xf2, 0x93, 0xa1, 0xb8, 0xbb, 0xb9, 0x23, 0x76, 0xae, 0xdf,
+-      0xe7, 0xfa, 0x33, 0x65, 0xa0, 0xdd, 0x5f, 0xb2, 0x28, 0x83, 0xf5, 0x47,
+-      0x61, 0x54, 0xc5, 0xa8, 0xdf, 0xf7, 0x28, 0x67, 0x12, 0xdf, 0x28, 0xe8,
+-      0x94, 0xad, 0x99, 0x32, 0xc6, 0x28, 0x5f, 0x00, 0x7b, 0x73, 0xda, 0x54,
+-      0x06, 0xda, 0xc4, 0x0c, 0x56, 0x23, 0x1d, 0x51, 0xe9, 0x83, 0x7f, 0x06,
+-      0x77, 0x8c, 0x6e, 0x1c, 0xb7, 0xb0, 0x4e, 0x35, 0xb9, 0xbe, 0x29, 0x3c,
+-      0x5e, 0x81, 0x44, 0xff, 0xc7, 0x8a, 0x82, 0x37, 0x13, 0xdd, 0x98, 0xa4,
+-      0x3e, 0xdd, 0xf9, 0x20, 0x1e, 0xcc, 0x55, 0xe1, 0xfe, 0x9c, 0x8d, 0x07,
+-      0x52, 0x30, 0xab, 0xa8, 0x4f, 0x32, 0x95, 0x88, 0xbd, 0x0f, 0x1f, 0x3a,
+-      0xf2, 0xdd, 0x8c, 0xa5, 0x2d, 0x48, 0x57, 0x04, 0xb0, 0x25, 0x1f, 0x62,
+-      0x3c, 0xa6, 0x71, 0x7a, 0x3a, 0x00, 0xff, 0x7a, 0x0f, 0x66, 0x22, 0x15,
+-      0x48, 0x36, 0x78, 0xf8, 0x1b, 0x09, 0xb7, 0x4f, 0xd7, 0x87, 0xb7, 0x5a,
+-      0x3e, 0xec, 0xb7, 0x3c, 0x18, 0xc9, 0xd9, 0x76, 0x87, 0x61, 0xe3, 0xea,
+-      0x7a, 0x15, 0xdf, 0xa2, 0xfd, 0x0e, 0x5a, 0x51, 0x9c, 0x2d, 0x3c, 0x49,
+-      0x59, 0x22, 0xae, 0xbc, 0x16, 0x65, 0xb7, 0x28, 0xbb, 0x45, 0xb9, 0x2d,
+-      0x91, 0xf3, 0x55, 0xc6, 0x8c, 0x41, 0xbd, 0x82, 0x94, 0xa1, 0x1a, 0x83,
+-      0x94, 0x23, 0x9e, 0xb2, 0xe1, 0x49, 0x69, 0x99, 0xbd, 0x04, 0xaf, 0x15,
+-      0x0d, 0xb6, 0xfd, 0xf1, 0x7a, 0xd1, 0x85, 0x6b, 0xee, 0xe9, 0x96, 0x18,
+-      0xfd, 0xed, 0x1a, 0xc6, 0xd5, 0xf7, 0x69, 0xb7, 0xa7, 0x0b, 0x41, 0x0c,
+-      0xe7, 0x1c, 0xbf, 0x3d, 0x54, 0x41, 0xb9, 0x45, 0xae, 0x82, 0x9e, 0x60,
+-      0x8c, 0x26, 0xfa, 0x18, 0xa3, 0xd8, 0x49, 0x99, 0x1f, 0xb0, 0x22, 0xe1,
+-      0x8e, 0xe9, 0x44, 0xeb, 0x6e, 0xc5, 0x87, 0xed, 0xf9, 0xeb, 0x72, 0x52,
+-      0x5f, 0x89, 0x41, 0xea, 0xaa, 0x52, 0xbe, 0x08, 0xf6, 0x51, 0xce, 0x97,
+-      0x4a, 0x72, 0xce, 0x16, 0x64, 0xae, 0xcf, 0xca, 0x5a, 0x96, 0x13, 0x99,
+-      0xa5, 0x66, 0x44, 0x41, 0x55, 0x08, 0xbb, 0xf3, 0xef, 0x70, 0x2d, 0xea,
+-      0xf1, 0x4d, 0xae, 0xc1, 0xcb, 0x8c, 0x91, 0x6f, 0x5c, 0xf3, 0x17, 0x59,
+-      0x8f, 0x27, 0xb8, 0x0e, 0xda, 0xe9, 0x0c, 0x42, 0xe8, 0x2f, 0xa4, 0x71,
+-      0x78, 0x1a, 0xe9, 0x39, 0xe3, 0x18, 0xe3, 0x7d, 0x39, 0xbc, 0x7a, 0x65,
+-      0x5a, 0xd5, 0xab, 0xb0, 0x6f, 0x36, 0x82, 0xa1, 0x42, 0x3b, 0xac, 0x5c,
+-      0x04, 0x07, 0xe8, 0x9b, 0x1f, 0xa6, 0xd2, 0x0f, 0x84, 0x21, 0xb2, 0x47,
+-      0xf0, 0x20, 0xdf, 0x79, 0x6a, 0x3a, 0x82, 0x41, 0xda, 0x68, 0x47, 0x2a,
+-      0xd1, 0x1a, 0xe4, 0xb5, 0xfd, 0xbc, 0x76, 0x84, 0xf6, 0x7f, 0xd5, 0x98,
+-      0x44, 0x7f, 0x8f, 0x96, 0x04, 0x22, 0xb8, 0xcf, 0x82, 0x4a, 0x17, 0x7e,
+-      0x82, 0xf8, 0x96, 0x7c, 0x95, 0xdf, 0xef, 0x2d, 0x54, 0x51, 0xdf, 0x30,
+-      0xa2, 0xfa, 0x27, 0xb6, 0xbf, 0xc5, 0xb6, 0xbf, 0x66, 0x24, 0x2e, 0xfc,
+-      0xd0, 0xeb, 0xc3, 0x63, 0x05, 0x0f, 0x86, 0x67, 0xab, 0xf0, 0xfb, 0x39,
+-      0x1f, 0xee, 0x6c, 0xa8, 0xc2, 0xc1, 0xd9, 0x34, 0xc6, 0xa6, 0xab, 0x30,
+-      0x90, 0xc3, 0x8a, 0xfb, 0x8c, 0xb1, 0x25, 0x15, 0xd0, 0x16, 0x3b, 0x90,
+-      0xc4, 0x55, 0xae, 0xc3, 0x63, 0xb3, 0xa1, 0x70, 0xdf, 0xb4, 0x8a, 0xe1,
+-      0xf9, 0x20, 0x9f, 0xf7, 0xf0, 0xf9, 0x4a, 0x18, 0xeb, 0xe2, 0xc3, 0x2a,
+-      0x44, 0xc6, 0x6a, 0x3c, 0x3c, 0x1b, 0xc4, 0x43, 0x39, 0x15, 0x07, 0xa6,
+-      0x5b, 0x30, 0x65, 0xa5, 0x71, 0x94, 0xd8, 0xf1, 0xf5, 0x94, 0xd6, 0x73,
+-      0x40, 0xd1, 0xd2, 0x5b, 0x95, 0x34, 0x1a, 0x53, 0x7e, 0x5c, 0x22, 0x0e,
+-      0xf9, 0x53, 0x4d, 0xad, 0x2f, 0x12, 0x1b, 0x2a, 0xcc, 0x08, 0xbf, 0x6b,
+-      0x13, 0x8c, 0xd9, 0xb4, 0xdf, 0xb3, 0x1e, 0x58, 0x26, 0xf1, 0x1b, 0x09,
+-      0x77, 0x59, 0x6a, 0xb8, 0xab, 0x50, 0x1f, 0xde, 0x61, 0x45, 0xc3, 0x3b,
+-      0x18, 0x5f, 0x5b, 0xc5, 0x1f, 0xad, 0x00, 0x8e, 0xa5, 0x7e, 0x69, 0xf7,
+-      0x2f, 0x71, 0xf0, 0x2c, 0x7c, 0xfb, 0xb4, 0x96, 0x99, 0x81, 0x66, 0x30,
+-      0x1b, 0x60, 0x72, 0xde, 0xc7, 0xf5, 0x53, 0xb0, 0x44, 0x6f, 0x21, 0x8e,
+-      0xab, 0x78, 0x98, 0x98, 0xf2, 0xb7, 0xc4, 0x94, 0x81, 0xe3, 0x71, 0x75,
+-      0x0a, 0x41, 0xda, 0x1b, 0xd8, 0x7b, 0x2e, 0xc2, 0x35, 0xef, 0xc4, 0x93,
+-      0x94, 0x6b, 0xc7, 0x86, 0x08, 0xee, 0x2f, 0xa8, 0xe1, 0x4e, 0xae, 0xdf,
+-      0xfb, 0xf9, 0x68, 0x78, 0x0b, 0xd7, 0xf2, 0xdd, 0xbc, 0x16, 0x2b, 0xe2,
+-      0x9f, 0xc4, 0x9f, 0x92, 0xf0, 0x00, 0xf7, 0x1d, 0xf7, 0xa3, 0x18, 0x91,
+-      0xb9, 0x68, 0x73, 0xeb, 0x65, 0x3b, 0xa4, 0xeb, 0xa7, 0x0f, 0xd0, 0xd6,
+-      0x8f, 0x16, 0x42, 0x78, 0xc8, 0xd2, 0x92, 0xdf, 0x50, 0x42, 0xb4, 0x69,
+-      0x80, 0x76, 0x20, 0xc0, 0x2c, 0x97, 0xe7, 0x52, 0x88, 0x2d, 0x77, 0xb1,
+-      0xf6, 0xe0, 0xac, 0xf8, 0x09, 0xd7, 0xde, 0xa2, 0x0f, 0xd0, 0x7f, 0xbe,
+-      0x71, 0x2d, 0x56, 0x35, 0x35, 0xe3, 0x60, 0x77, 0x92, 0xfe, 0xe2, 0xda,
+-      0xe8, 0xc4, 0xb4, 0xd8, 0x41, 0x9b, 0x82, 0x27, 0x8d, 0xb5, 0xeb, 0xfe,
+-      0xd6, 0xbe, 0xb4, 0x4c, 0xec, 0xa1, 0x62, 0x84, 0x36, 0x3c, 0x6d, 0xd9,
+-      0xf6, 0xd5, 0xf5, 0x3f, 0xb5, 0x5b, 0x6f, 0x16, 0xbb, 0x88, 0xae, 0xdf,
+-      0x52, 0x24, 0x8f, 0x2c, 0xd1, 0xc3, 0xff, 0x1f, 0x7c, 0xe5, 0x0f, 0xed,
+-      0x7e, 0x47, 0x3f, 0xf1, 0x17, 0x1f, 0x7d, 0xf1, 0x49, 0x8e, 0xed, 0x41,
+-      0x3f, 0xc7, 0x7b, 0xc4, 0xb2, 0x3f, 0xaa, 0x33, 0x3f, 0xb5, 0x5b, 0x37,
+-      0xea, 0x43, 0x8b, 0xca, 0xff, 0xe0, 0xf5, 0x08, 0x1e, 0x2e, 0xb4, 0xd2,
+-      0x76, 0x1d, 0x78, 0xca, 0x12, 0x3c, 0xec, 0x64, 0xbc, 0x45, 0xe9, 0xcf,
+-      0xf5, 0xf4, 0x6f, 0x9f, 0xb2, 0xd5, 0xca, 0x63, 0xc7, 0x64, 0x06, 0xdb,
+-      0xe9, 0xef, 0x17, 0xb2, 0xf1, 0xd6, 0xe7, 0xa1, 0x65, 0xa8, 0x43, 0xb8,
+-      0x93, 0x36, 0xee, 0xb0, 0xb4, 0x4e, 0x59, 0xd3, 0x0e, 0xe2, 0xd2, 0x2b,
+-      0xd9, 0x68, 0xb8, 0xbd, 0x20, 0xf6, 0xae, 0x0f, 0x6f, 0x29, 0xdc, 0xca,
+-      0xb5, 0x57, 0xb0, 0x69, 0x75, 0x80, 0x38, 0x73, 0x07, 0xdc, 0x75, 0x75,
+-      0xd7, 0xee, 0xcd, 0x54, 0x53, 0xff, 0x4f, 0xd1, 0x85, 0xcc, 0x32, 0xf7,
+-      0xda, 0x30, 0xaf, 0xd5, 0xae, 0x47, 0xf8, 0x0e, 0xfa, 0xc1, 0x3d, 0xf4,
+-      0x83, 0xab, 0xeb, 0x7f, 0x69, 0xc7, 0x6e, 0x72, 0xfd, 0xa0, 0x7d, 0xda,
+-      0x17, 0xde, 0x46, 0x3b, 0x6d, 0x35, 0x14, 0xcc, 0x1a, 0x4f, 0xa1, 0xff,
+-      0x1a, 0x77, 0x48, 0xcf, 0x9c, 0x35, 0xd2, 0xc4, 0x91, 0x36, 0xf8, 0x96,
+-      0x60, 0xe6, 0x79, 0xe3, 0x30, 0x62, 0xae, 0xef, 0xe0, 0x40, 0x2e, 0x88,
+-      0xcc, 0x9d, 0x2a, 0xe6, 0x1a, 0x55, 0x3c, 0xc2, 0xb1, 0x3f, 0x4c, 0x35,
+-      0x0d, 0xbe, 0x45, 0x1b, 0xcc, 0x2c, 0x91, 0x6b, 0x69, 0xfc, 0x95, 0xf1,
+-      0x65, 0xe0, 0x26, 0x77, 0xee, 0x79, 0x89, 0xd1, 0xf9, 0x16, 0x1c, 0x29,
+-      0xf4, 0x29, 0x2e, 0x6e, 0x6a, 0x9d, 0x69, 0x7c, 0xcf, 0x16, 0x2c, 0x9d,
+-      0x27, 0x86, 0xb4, 0xd3, 0xa7, 0xc6, 0xe9, 0x47, 0xa3, 0xc4, 0x90, 0xed,
+-      0xf4, 0xa3, 0x27, 0xf3, 0xa2, 0x53, 0xc2, 0x30, 0xbc, 0x37, 0x33, 0x37,
+-      0xd3, 0x3e, 0x96, 0x93, 0xf3, 0x6b, 0x55, 0xfd, 0x30, 0xa6, 0x1c, 0xd9,
+-      0x86, 0x95, 0x3b, 0xc8, 0x31, 0x2e, 0xf9, 0x51, 0x1b, 0xd5, 0x1f, 0xc1,
+-      0x69, 0xe7, 0x5a, 0x84, 0xef, 0xa6, 0x3d, 0x1e, 0x1d, 0xaa, 0x6a, 0x76,
+-      0x30, 0xaf, 0x8a, 0xef, 0x77, 0x2a, 0x3b, 0x98, 0x6b, 0xd3, 0xcc, 0xb5,
+-      0x69, 0xe6, 0xda, 0x34, 0xe7, 0x4f, 0x33, 0xc7, 0xb6, 0x17, 0x86, 0x95,
+-      0x1e, 0xb1, 0xbb, 0xd8, 0xdf, 0x72, 0xf9, 0x03, 0xb1, 0x27, 0xbc, 0xbd,
+-      0xb0, 0xc6, 0xe3, 0x72, 0xba, 0x61, 0xa5, 0xc4, 0x61, 0x02, 0x55, 0x3a,
+-      0x73, 0x98, 0x35, 0xac, 0x74, 0x31, 0xcf, 0xf6, 0x39, 0x36, 0x8c, 0x0f,
+-      0x5d, 0x66, 0x7e, 0x7d, 0x93, 0xf9, 0x35, 0x9f, 0x62, 0x3c, 0xad, 0xbe,
+-      0x6a, 0xf7, 0x2f, 0x73, 0x73, 0xc1, 0x18, 0xe5, 0xfc, 0x1a, 0xd7, 0xaa,
+-      0xc8, 0x1c, 0xda, 0xe1, 0x55, 0x70, 0x9f, 0x8e, 0xda, 0x3a, 0x62, 0xe9,
+-      0x91, 0x02, 0xf1, 0xdf, 0x88, 0xb7, 0x7e, 0x40, 0x83, 0x1e, 0xd1, 0xfd,
+-      0xb8, 0x7a, 0x13, 0x49, 0x8e, 0xde, 0x8e, 0x63, 0xb9, 0x4a, 0x0c, 0xa6,
+-      0xd2, 0x4b, 0x03, 0xe4, 0x28, 0x9d, 0x2d, 0x78, 0x9c, 0x53, 0x2b, 0x51,
+-      0x33, 0x41, 0x7f, 0x41, 0xfa, 0x38, 0xf3, 0xc3, 0xa4, 0x75, 0x2b, 0xf2,
+-      0xcc, 0xa3, 0x73, 0x86, 0x0f, 0x6f, 0xe6, 0xd7, 0x10, 0xdf, 0x12, 0x46,
+-      0x48, 0xa9, 0x62, 0xdc, 0x9a, 0xc8, 0x5a, 0x82, 0x4b, 0xb6, 0x3d, 0x27,
+-      0x32, 0x24, 0x12, 0xe9, 0x51, 0x08, 0x56, 0xd9, 0x2b, 0xee, 0x4d, 0x55,
+-      0x60, 0x53, 0x22, 0x8c, 0x15, 0x7a, 0xbf, 0xd2, 0x59, 0x48, 0x18, 0xaf,
+-      0xe2, 0x77, 0x95, 0x7b, 0xe6, 0x4d, 0xc6, 0x74, 0x9f, 0xb2, 0x67, 0xbe,
+-      0x0a, 0x97, 0x22, 0x22, 0x23, 0x6a, 0xfd, 0xba, 0x07, 0xef, 0xdd, 0xa5,
+-      0x40, 0xd5, 0xd3, 0x38, 0xdf, 0xa2, 0xd2, 0x9f, 0x3a, 0xc9, 0x2d, 0x62,
+-      0xf0, 0x2e, 0x44, 0xc3, 0x3b, 0xb9, 0x06, 0xd5, 0x0b, 0xb2, 0x2e, 0x1d,
+-      0xb4, 0x55, 0x3d, 0xfd, 0xaf, 0x53, 0xe9, 0xa0, 0x1d, 0xbb, 0x66, 0xa1,
+-      0x56, 0x99, 0xbd, 0xca, 0xb6, 0x82, 0x46, 0x3b, 0x89, 0x4d, 0x86, 0xc9,
+-      0x91, 0xc4, 0x47, 0xca, 0x6b, 0x28, 0x7e, 0x7a, 0xe3, 0x3a, 0xf6, 0x79,
+-      0x24, 0xd6, 0x36, 0xad, 0x36, 0x19, 0x87, 0x1e, 0xca, 0x25, 0x32, 0x04,
+-      0x50, 0xdb, 0x68, 0xaf, 0xf8, 0x30, 0xb5, 0xc0, 0x7b, 0x26, 0x8e, 0x17,
+-      0xba, 0xb9, 0x2e, 0xcd, 0x25, 0xbf, 0x52, 0xe9, 0x87, 0x1d, 0x1c, 0x5f,
+-      0xfc, 0x3b, 0x0d, 0x77, 0x2d, 0x3b, 0xc9, 0x89, 0xfe, 0xb5, 0x35, 0x3c,
+-      0xc8, 0x31, 0x64, 0x1d, 0x2b, 0xca, 0x7e, 0x19, 0xbe, 0x67, 0x3a, 0x8d,
+-      0xf7, 0x9c, 0x1c, 0x5a, 0xf6, 0xe1, 0x61, 0xa5, 0x93, 0x6b, 0x09, 0xbf,
+-      0x3b, 0xfe, 0xae, 0x69, 0xf8, 0x6b, 0x4c, 0xc4, 0xbc, 0xe4, 0x6d, 0x17,
+-      0x53, 0x09, 0x75, 0x52, 0xe9, 0xe6, 0x58, 0x8c, 0x2d, 0x62, 0x7d, 0x35,
+-      0xfd, 0xa6, 0x83, 0xfa, 0x76, 0x51, 0xdf, 0x2e, 0x67, 0x4e, 0xf1, 0xbb,
+-      0x5f, 0x9d, 0x77, 0x4b, 0xe1, 0x1e, 0x47, 0xf7, 0x9d, 0x7c, 0x67, 0x0f,
+-      0x65, 0xdd, 0xc3, 0xe7, 0xb7, 0x58, 0xdf, 0xe7, 0x35, 0x91, 0x57, 0xe2,
+-      0xfa, 0xc6, 0x5c, 0x25, 0xb1, 0xfd, 0xdd, 0x12, 0x57, 0x40, 0xc6, 0x63,
+-      0x4a, 0xec, 0x0f, 0xa1, 0xa7, 0x05, 0x81, 0xa5, 0xe6, 0x50, 0xdb, 0xee,
+-      0x06, 0xe2, 0x14, 0x71, 0x32, 0x70, 0x9c, 0x1c, 0x99, 0xd8, 0x3b, 0xd7,
+-      0xaa, 0x60, 0xcc, 0xb8, 0x99, 0xf1, 0x67, 0x60, 0xa2, 0xa0, 0x75, 0xc6,
+-      0x78, 0xaf, 0x79, 0x52, 0xb8, 0xfb, 0x01, 0xb4, 0x93, 0xaf, 0x45, 0xcd,
+-      0x41, 0x44, 0xad, 0x78, 0x74, 0x42, 0xd1, 0x06, 0xb7, 0x40, 0xbb, 0x40,
+-      0xcc, 0x1f, 0x9e, 0x55, 0xb4, 0xa1, 0x3a, 0xaf, 0x96, 0x7e, 0xdb, 0xe1,
+-      0xcd, 0x07, 0xb0, 0xda, 0xe1, 0x66, 0x83, 0x48, 0x92, 0xa3, 0xee, 0xe4,
+-      0x98, 0xfb, 0x37, 0x29, 0xb8, 0x62, 0xfc, 0x94, 0xeb, 0xa4, 0xa5, 0x33,
+-      0x8a, 0x81, 0x2c, 0xe3, 0x3f, 0x7a, 0x5c, 0x38, 0xf8, 0x01, 0x72, 0x70,
+-      0x04, 0x42, 0x7c, 0x36, 0x3b, 0x19, 0x1f, 0x0e, 0x78, 0xb5, 0x24, 0xf9,
+-      0x77, 0x9a, 0x63, 0x1a, 0x05, 0xf2, 0x72, 0xce, 0x11, 0xbb, 0xaf, 0x34,
+-      0x66, 0xa2, 0x34, 0xa6, 0x9e, 0x07, 0xe3, 0x62, 0x02, 0xdb, 0x13, 0xcc,
+-      0x01, 0xc4, 0xb2, 0xa3, 0xc2, 0xf5, 0x39, 0x5e, 0xe5, 0x71, 0x83, 0xdf,
+-      0x87, 0x95, 0x3d, 0x12, 0x33, 0x95, 0x2e, 0x73, 0xab, 0xe5, 0x1c, 0x35,
+-      0xe6, 0x21, 0x2c, 0x38, 0x73, 0x0c, 0xc9, 0x1c, 0x43, 0x3f, 0x52, 0xb4,
+-      0xe4, 0x39, 0x45, 0x30, 0xb8, 0xa9, 0xef, 0x1c, 0x63, 0xe4, 0x88, 0xa2,
+-      0xb5, 0x1e, 0xa3, 0xfa, 0x41, 0x5d, 0xc6, 0x3f, 0x54, 0x9a, 0x67, 0x08,
+-      0x8d, 0x79, 0xc6, 0x5f, 0x21, 0xa0, 0x6c, 0xc9, 0xb5, 0x63, 0x6c, 0xb6,
+-      0x1d, 0xa3, 0x39, 0x05, 0xf7, 0x18, 0xcb, 0x70, 0xe9, 0x66, 0xa7, 0xfe,
+-      0xa8, 0x59, 0xa1, 0xd7, 0x61, 0x44, 0x45, 0xad, 0x47, 0xff, 0x3c, 0xf6,
+-      0x96, 0xb8, 0xfb, 0xf6, 0x13, 0x3d, 0xc4, 0x73, 0x1b, 0x1f, 0x30, 0x56,
+-      0xe2, 0x4b, 0x90, 0xf6, 0x9b, 0xad, 0xe4, 0xd9, 0x4b, 0xbd, 0x6e, 0x3c,
+-      0xff, 0x7d, 0xc0, 0x5d, 0x03, 0xb1, 0xff, 0x67, 0xef, 0xb5, 0xe3, 0xe9,
+-      0x5c, 0x05, 0x5a, 0xd7, 0xe3, 0xce, 0x28, 0x6a, 0x3c, 0xcc, 0x5d, 0xef,
+-      0xec, 0x56, 0x1e, 0xe6, 0x3d, 0xe7, 0xd9, 0xc0, 0x6f, 0x98, 0x1f, 0xb7,
+-      0xfd, 0x71, 0xa3, 0x5c, 0x97, 0x67, 0x6f, 0xbc, 0xae, 0x9a, 0xff, 0xf2,
+-      0xba, 0x82, 0x17, 0x08, 0x50, 0x5f, 0x67, 0xae, 0xc8, 0x67, 0x6d, 0x78,
+-      0x4d, 0x1f, 0x06, 0x27, 0x63, 0x38, 0xb0, 0x10, 0xc1, 0x42, 0x56, 0xeb,
+-      0xbf, 0xc4, 0xba, 0x60, 0x6f, 0x8b, 0x8e, 0x87, 0x16, 0xa2, 0x98, 0xcf,
+-      0xc2, 0x0e, 0x9a, 0x7a, 0x31, 0xa8, 0x24, 0xb1, 0x7f, 0xa1, 0x1e, 0xe7,
+-      0xb2, 0xfa, 0x85, 0x51, 0x25, 0x31, 0x5c, 0x47, 0x3e, 0xf1, 0xc8, 0x42,
+-      0x33, 0x1e, 0x5e, 0x08, 0xf0, 0x1d, 0x1b, 0x5d, 0xa9, 0x7a, 0x3e, 0xef,
+-      0xc1, 0xf3, 0x27, 0x6d, 0x5b, 0xf8, 0xd4, 0xe0, 0x02, 0x30, 0x3f, 0xc5,
+-      0x1c, 0x73, 0x86, 0xf9, 0xe6, 0x19, 0x60, 0xff, 0x33, 0x1e, 0xcc, 0x4e,
+-      0xd9, 0xd8, 0x6b, 0x8c, 0xd6, 0x79, 0xe8, 0xe4, 0xfd, 0xcc, 0x07, 0x7e,
+-      0xe6, 0xb6, 0x7b, 0x55, 0x17, 0xa7, 0x2f, 0x11, 0x87, 0x1e, 0x78, 0x26,
+-      0x89, 0x77, 0xb2, 0x19, 0x74, 0x91, 0x77, 0x0f, 0x53, 0x96, 0xb7, 0xb3,
+-      0xcc, 0x4f, 0x0b, 0x06, 0xde, 0xca, 0x06, 0x38, 0x4f, 0x33, 0x5e, 0xcb,
+-      0xca, 0x33, 0xf2, 0x6c, 0x08, 0x03, 0x94, 0xe5, 0xcd, 0x6c, 0x94, 0x73,
+-      0x46, 0xf0, 0x1d, 0x3e, 0x77, 0xff, 0x82, 0xce, 0x7c, 0x14, 0xe0, 0xbc,
+-      0x31, 0xbc, 0x91, 0x0d, 0x51, 0xd6, 0x08, 0x73, 0xd0, 0x00, 0xc6, 0xb2,
+-      0x4d, 0x17, 0xb6, 0x90, 0xb3, 0xb8, 0x39, 0x44, 0xae, 0x5d, 0xb6, 0xbb,
+-      0x9d, 0x98, 0x93, 0x79, 0xca, 0xf3, 0x0e, 0x60, 0x34, 0xfb, 0x9a, 0xb7,
+-      0x5c, 0x27, 0xbf, 0x30, 0xb5, 0xe8, 0x70, 0xba, 0xe7, 0x2d, 0xfe, 0x3d,
+-      0x0b, 0x9c, 0xb3, 0x32, 0x76, 0xad, 0x49, 0x0e, 0xcb, 0xdc, 0xf3, 0xc3,
+-      0x0d, 0xcd, 0x9c, 0x57, 0xef, 0x7f, 0x45, 0x91, 0x3a, 0xc6, 0x87, 0xd8,
+-      0x33, 0x62, 0x2f, 0xc6, 0xf1, 0x3c, 0xf0, 0x57, 0xe4, 0x95, 0x8d, 0x93,
+-      0x9a, 0xf8, 0x7d, 0x1f, 0xf9, 0x4a, 0x4f, 0x11, 0x0d, 0xc9, 0x87, 0x30,
+-      0x62, 0x57, 0x90, 0x77, 0xd7, 0x92, 0xaf, 0x2e, 0x34, 0x33, 0xff, 0x6c,
+-      0xb0, 0xed, 0xef, 0xb7, 0xc0, 0xf6, 0x98, 0xba, 0x51, 0xe7, 0x2d, 0x7e,
+-      0xbe, 0x06, 0xfa, 0x85, 0xb0, 0xa2, 0x17, 0x7f, 0x88, 0xc4, 0xd0, 0xab,
+-      0x10, 0xbb, 0x02, 0x6b, 0x16, 0x7c, 0x58, 0x4b, 0x7d, 0xb6, 0x4e, 0x72,
+-      0x6e, 0xf2, 0x8e, 0x04, 0x75, 0xba, 0x7d, 0x92, 0x5c, 0x4a, 0x0f, 0x61,
+-      0x35, 0x6d, 0x3c, 0x78, 0xca, 0xb6, 0x2b, 0x69, 0xe3, 0x46, 0xae, 0xcf,
+-      0x7d, 0x27, 0x6c, 0xbc, 0x62, 0xbc, 0x42, 0x9b, 0x2a, 0xe4, 0x83, 0x2d,
+-      0x7c, 0x27, 0xc2, 0xe7, 0x03, 0xd8, 0x3f, 0x29, 0x75, 0x50, 0x3d, 0x9f,
+-      0xb9, 0x88, 0x63, 0xd9, 0x24, 0x9a, 0x69, 0xbf, 0x18, 0xc7, 0x6c, 0xe2,
+-      0x3b, 0xb1, 0x05, 0x37, 0x97, 0xc4, 0x16, 0x7e, 0x1d, 0x0e, 0x00, 0xa7,
+-      0xa7, 0xb4, 0x89, 0x22, 0xb9, 0x74, 0x8d, 0x39, 0x02, 0xe6, 0x62, 0xbc,
+-      0x3d, 0xa3, 0xe0, 0xf8, 0x14, 0x6b, 0xb7, 0x0d, 0xb0, 0xab, 0xa8, 0xc7,
+-      0x5b, 0x33, 0xbf, 0x89, 0xe7, 0x4e, 0x52, 0xf7, 0x67, 0x23, 0xf8, 0x7a,
+-      0xd6, 0x87, 0x5b, 0x8e, 0x0b, 0x3f, 0xd3, 0x93, 0x07, 0x14, 0xa9, 0x75,
+-      0xa4, 0x06, 0x49, 0xc4, 0xfc, 0x8a, 0x07, 0x0d, 0xcf, 0xf9, 0xa0, 0x9f,
+-      0x8b, 0xc1, 0xdf, 0x10, 0x80, 0xde, 0xf0, 0xfb, 0xc4, 0x17, 0x0f, 0x2a,
+-      0x58, 0x97, 0x6e, 0xff, 0x4a, 0x92, 0xd7, 0x22, 0xbc, 0x86, 0xdf, 0xac,
+-      0x84, 0x77, 0xb9, 0x97, 0xf9, 0xb8, 0x42, 0x27, 0xb7, 0xf2, 0xd9, 0xb6,
+-      0x97, 0x78, 0xbf, 0xe7, 0xab, 0xb6, 0x1d, 0x5f, 0x2f, 0xcf, 0xab, 0x88,
+-      0x9f, 0xd3, 0xf9, 0x9c, 0x9b, 0x03, 0xaf, 0x73, 0x2b, 0x2f, 0x7d, 0x47,
+-      0xe2, 0xf3, 0x71, 0xb8, 0xf5, 0x90, 0xcb, 0xc1, 0x5f, 0x2a, 0x08, 0x4f,
+-      0x89, 0x39, 0x3a, 0x9c, 0x9d, 0x52, 0x88, 0x73, 0x26, 0x9f, 0xdd, 0x0c,
+-      0x6f, 0x4a, 0x9b, 0xc8, 0x70, 0xed, 0xf7, 0xaa, 0xad, 0x78, 0xc1, 0xf2,
+-      0xa3, 0x5a, 0x5f, 0x8e, 0x07, 0x7b, 0x54, 0xbc, 0x40, 0x8e, 0xcf, 0x75,
+-      0x4a, 0x16, 0x51, 0xc9, 0x5a, 0x8b, 0xe3, 0x79, 0xfe, 0x1a, 0xfa, 0x57,
+-      0x3c, 0xc4, 0x36, 0xaf, 0x83, 0x6d, 0x15, 0x0d, 0x40, 0x31, 0xef, 0xc3,
+-      0x79, 0xdd, 0xe5, 0x77, 0x2f, 0x39, 0x79, 0x58, 0x53, 0x8b, 0xd7, 0x78,
+-      0x9d, 0xd6, 0x9a, 0x56, 0x0e, 0x7b, 0x45, 0xce, 0x17, 0x0b, 0x3b, 0x7d,
+-      0xae, 0xff, 0x5c, 0xf4, 0x4a, 0xfd, 0x70, 0xfd, 0x7b, 0x15, 0x3c, 0xa6,
+-      0x16, 0x6d, 0xf7, 0x22, 0xe0, 0x33, 0x03, 0x6d, 0xe3, 0xfa, 0xe7, 0x6e,
+-      0x90, 0xbd, 0x19, 0x63, 0x85, 0xeb, 0x75, 0x73, 0x67, 0xd6, 0xf1, 0x9b,
+-      0x4e, 0xb1, 0xfd, 0x53, 0x86, 0x60, 0xeb, 0xb0, 0xd2, 0x41, 0xac, 0xca,
+-      0xf8, 0xdc, 0xba, 0xf8, 0x08, 0xeb, 0xe2, 0xd7, 0xb3, 0xd2, 0x1b, 0x39,
+-      0x84, 0x7d, 0x0e, 0xce, 0x0e, 0x09, 0xce, 0xc6, 0xce, 0x42, 0x1b, 0x1c,
+-      0x28, 0xe1, 0xec, 0x9c, 0x8b, 0xb3, 0xfd, 0x2e, 0xce, 0x1e, 0x2a, 0xe1,
+-      0xec, 0x10, 0x9a, 0xf3, 0x11, 0x72, 0xe0, 0x0e, 0xe6, 0xda, 0x6e, 0x72,
+-      0x0e, 0xc9, 0x91, 0x7d, 0xca, 0xce, 0xf9, 0x80, 0xb2, 0x2d, 0x17, 0xc0,
+-      0xeb, 0xe4, 0x53, 0x33, 0xbd, 0x50, 0x6f, 0xd9, 0x80, 0xe0, 0xce, 0x5c,
+-      0x0f, 0x2a, 0x75, 0xa9, 0x03, 0x2b, 0xb1, 0xdd, 0xc9, 0x55, 0x52, 0x2f,
+-      0x49, 0x2f, 0xa0, 0x97, 0x58, 0x07, 0x35, 0x68, 0xba, 0x75, 0xbf, 0xe0,
+-      0xde, 0xed, 0x7c, 0xf7, 0x2c, 0xfd, 0x10, 0x6e, 0x4e, 0x53, 0xee, 0x60,
+-      0x3d, 0xf0, 0x61, 0x4a, 0x41, 0xf1, 0xce, 0x00, 0x38, 0x16, 0xf5, 0x3d,
+-      0xd0, 0x36, 0x3e, 0xd5, 0xa3, 0x74, 0xcc, 0xce, 0x05, 0x99, 0xb7, 0x99,
+-      0x93, 0x66, 0x82, 0x6e, 0xae, 0xfe, 0xec, 0x58, 0xd2, 0x73, 0x49, 0xb6,
+-      0x6d, 0x22, 0xc7, 0x69, 0x5d, 0xff, 0x8f, 0x36, 0x7e, 0x47, 0xde, 0xff,
+-      0xcf, 0x25, 0xfb, 0xa5, 0x29, 0x4f, 0x24, 0xb0, 0xbd, 0xa0, 0x06, 0xd2,
+-      0x85, 0x0e, 0xbe, 0xdf, 0xc3, 0xb1, 0x7a, 0x83, 0x1d, 0xd6, 0xdd, 0xc1,
+-      0xad, 0x56, 0x77, 0x70, 0x9b, 0xc5, 0xd8, 0x2d, 0xf4, 0xd2, 0x8e, 0x3d,
+-      0xac, 0xe1, 0xef, 0x26, 0x7f, 0x90, 0x31, 0xfb, 0xc9, 0x65, 0x82, 0xd4,
+-      0x6d, 0x84, 0xba, 0x15, 0xa3, 0x7e, 0xa4, 0x35, 0x3f, 0x34, 0x75, 0xcc,
+-      0x59, 0xb7, 0x09, 0xa7, 0x8f, 0x54, 0x65, 0xae, 0x6e, 0xeb, 0x3a, 0x41,
+-      0x4c, 0x37, 0x1b, 0xda, 0x6e, 0x39, 0x85, 0x25, 0x7e, 0x53, 0xea, 0x5e,
+-      0xd6, 0xb2, 0x89, 0x84, 0xf1, 0x3e, 0x12, 0xd1, 0xd7, 0xf9, 0xec, 0x28,
+-      0x7d, 0x75, 0xcc, 0xe9, 0x1d, 0x70, 0x01, 0xf2, 0xcd, 0xe8, 0xb2, 0x02,
+-      0xc1, 0xdb, 0x59, 0x57, 0x85, 0x4d, 0xad, 0x75, 0x97, 0x57, 0x7a, 0x19,
+-      0xc5, 0xdf, 0x0e, 0xa1, 0x19, 0x9d, 0x85, 0x40, 0x70, 0xcb, 0xf4, 0xe7,
+-      0xf0, 0x0f, 0x27, 0x99, 0xbb, 0x20, 0x7e, 0x67, 0xdb, 0xf7, 0xb3, 0x26,
+-      0x39, 0x9a, 0xaf, 0xc7, 0x15, 0x67, 0x4d, 0x7d, 0x38, 0x92, 0x8f, 0xe1,
+-      0x32, 0xf1, 0xc9, 0xb7, 0x50, 0x87, 0x77, 0xa7, 0xbc, 0xd8, 0x67, 0xdc,
+-      0x56, 0xca, 0x09, 0x1e, 0xdc, 0x9b, 0x3c, 0x48, 0x1e, 0xe0, 0x41, 0x2d,
+-      0x39, 0xd8, 0x23, 0xce, 0x35, 0x2f, 0x6b, 0xb7, 0x2f, 0x62, 0xd8, 0xcd,
+-      0x19, 0x94, 0xb1, 0x9e, 0x32, 0xb6, 0x04, 0xb7, 0xe4, 0xb4, 0xe0, 0x1d,
+-      0x39, 0x04, 0xfc, 0xe6, 0xca, 0xb6, 0x33, 0x27, 0x6d, 0x0c, 0x18, 0xab,
+-      0xf0, 0xe1, 0xc9, 0xd1, 0x41, 0x1f, 0xfd, 0xe5, 0x27, 0xa9, 0x3e, 0x58,
+-      0xd3, 0x38, 0x4f, 0x26, 0x71, 0x31, 0x44, 0xfc, 0x6e, 0x24, 0x67, 0xa0,
+-      0x1f, 0x18, 0xf3, 0x8c, 0xc5, 0x6d, 0xf4, 0x0f, 0xfa, 0x43, 0xda, 0x6b,
+-      0x26, 0xfa, 0xc7, 0x48, 0x00, 0x6b, 0x28, 0x4f, 0x90, 0xf8, 0x1c, 0x5a,
+-      0x88, 0x05, 0xf7, 0x30, 0xa7, 0x44, 0x59, 0x9b, 0x05, 0x13, 0xb8, 0xad,
+-      0x0e, 0x89, 0xe4, 0x22, 0xf5, 0xf6, 0x2f, 0x34, 0x07, 0x77, 0x31, 0x47,
+-      0x5c, 0x49, 0xd8, 0x23, 0xaf, 0x18, 0x21, 0x84, 0x17, 0x0c, 0xda, 0xbb,
+-      0x0f, 0xa3, 0xf3, 0x2c, 0x97, 0x12, 0xac, 0xd7, 0x17, 0x5a, 0x83, 0xb7,
+-      0x33, 0x16, 0x6b, 0x88, 0x53, 0x4d, 0x0b, 0xe9, 0xa0, 0xd4, 0x6b, 0xcd,
+-      0x0b, 0x1b, 0x29, 0x9f, 0xac, 0x63, 0x73, 0xdb, 0x26, 0xfa, 0x41, 0x6c,
+-      0x01, 0xdb, 0x09, 0x65, 0xaf, 0x71, 0xcc, 0xbe, 0x28, 0x79, 0xe8, 0xfe,
+-      0x0d, 0x21, 0x62, 0x91, 0xd8, 0x92, 0x76, 0x2c, 0x94, 0x75, 0x92, 0xdc,
+-      0xdb, 0xd0, 0xb6, 0x70, 0x4a, 0x72, 0x6f, 0xb4, 0x2d, 0x7b, 0x4a, 0xc7,
+-      0x65, 0xe6, 0x8f, 0x35, 0x29, 0xcd, 0x38, 0xa7, 0xc4, 0xa3, 0x17, 0xa9,
+-      0x8b, 0x0f, 0x3f, 0xb3, 0xf7, 0xea, 0x89, 0xe2, 0x4a, 0xc6, 0x4f, 0x2d,
+-      0xf1, 0x2f, 0x4a, 0x5c, 0xaf, 0x5d, 0xa0, 0x61, 0x16, 0x7e, 0x46, 0xff,
+-      0x88, 0x22, 0x90, 0xd0, 0xf1, 0xde, 0xc9, 0x24, 0xed, 0x70, 0x6d, 0xcc,
+-      0x03, 0xa4, 0x50, 0x03, 0x4c, 0x77, 0x4f, 0x3c, 0x47, 0x1f, 0x1c, 0xe7,
+-      0xbc, 0x15, 0x0b, 0x22, 0xb3, 0x3c, 0x1f, 0xe1, 0xf3, 0xd7, 0xe7, 0xae,
+-      0xe5, 0xdc, 0x1f, 0x9d, 0x92, 0xfe, 0x52, 0xb4, 0xed, 0xfc, 0x49, 0x77,
+-      0xee, 0x44, 0x2a, 0x89, 0x9f, 0x9e, 0xd4, 0x86, 0xde, 0x53, 0xe2, 0xfd,
+-      0xe7, 0x15, 0x99, 0x1f, 0xf5, 0x35, 0xf8, 0xd0, 0x1e, 0x4d, 0x24, 0x86,
+-      0xf7, 0x72, 0xcc, 0xd6, 0x8d, 0xb4, 0xbf, 0x23, 0x07, 0x13, 0x3b, 0xb1,
+-      0xd4, 0x4f, 0x79, 0x5c, 0x59, 0xea, 0x39, 0xf6, 0xc9, 0x52, 0x9d, 0xc5,
+-      0x1a, 0xf3, 0xba, 0x3c, 0x11, 0xda, 0x21, 0xb0, 0xa7, 0x25, 0x84, 0x3a,
+-      0xe7, 0x39, 0x95, 0xcf, 0x89, 0x1d, 0x7e, 0xae, 0x78, 0xf4, 0xf7, 0x89,
+-      0x5b, 0x82, 0x1d, 0x11, 0x62, 0xd6, 0xdd, 0x52, 0x8f, 0x66, 0x32, 0xf4,
+-      0x77, 0x3f, 0xfd, 0x7d, 0xab, 0xf8, 0xb4, 0x45, 0x9f, 0xb6, 0xe8, 0xd3,
+-      0x96, 0x16, 0x1d, 0x42, 0x5c, 0x1d, 0xe0, 0xba, 0xa5, 0xa3, 0xe2, 0xeb,
+-      0xbd, 0xd8, 0xc7, 0xdf, 0xfb, 0x78, 0xff, 0x08, 0x6b, 0x54, 0x2c, 0x95,
+-      0x39, 0x0f, 0xa1, 0xc3, 0x7a, 0x02, 0x83, 0x39, 0xfc, 0x22, 0xd8, 0x52,
+-      0x89, 0xca, 0xd5, 0x52, 0x7f, 0x6b, 0xea, 0x51, 0x3c, 0xc1, 0x1a, 0xe8,
+-      0xe7, 0x4a, 0xb5, 0xee, 0xeb, 0x39, 0xa6, 0x68, 0x6a, 0x07, 0x6b, 0xd9,
+-      0xbd, 0x85, 0xbb, 0xb9, 0xbe, 0xf1, 0xc1, 0xd7, 0x15, 0xd6, 0x41, 0x75,
+-      0x9c, 0x9b, 0xb1, 0x74, 0x07, 0xe7, 0xb1, 0x44, 0x0e, 0x07, 0x5f, 0x7f,
+-      0x0f, 0x62, 0xdb, 0x6f, 0x37, 0x0e, 0x70, 0x7e, 0x57, 0x8e, 0x51, 0xd6,
+-      0x83, 0x03, 0x8c, 0xb1, 0x7d, 0x4e, 0x7c, 0xf5, 0x72, 0x8c, 0xeb, 0xb8,
+-      0xb5, 0x25, 0x2b, 0xf9, 0xd2, 0xc6, 0x93, 0x86, 0x8d, 0xe7, 0xf9, 0x7b,
+-      0x81, 0xd8, 0x35, 0x76, 0x03, 0x76, 0x79, 0xf8, 0xdc, 0x1e, 0x3e, 0xd7,
+-      0x4a, 0xdc, 0x9e, 0x9f, 0x95, 0xbe, 0xde, 0x21, 0xe9, 0xeb, 0x21, 0x6f,
+-      0x89, 0xed, 0x87, 0x70, 0x3e, 0x1b, 0x1f, 0xf6, 0x7a, 0xed, 0x11, 0xc6,
+-      0xd5, 0x85, 0x8f, 0xe8, 0xbb, 0x6f, 0x6e, 0xd0, 0x7a, 0x68, 0xc3, 0xe4,
+-      0xa4, 0xa2, 0x45, 0xbf, 0x8b, 0xe2, 0xf6, 0x00, 0x9a, 0x62, 0x6b, 0xbd,
+-      0x09, 0x95, 0x38, 0x57, 0x1c, 0xa0, 0xa6, 0xcf, 0x16, 0x5c, 0x6c, 0xdb,
+-      0x54, 0xc2, 0xb6, 0xd6, 0x7c, 0x15, 0xb1, 0x87, 0x39, 0x78, 0xd6, 0xce,
+-      0x84, 0x99, 0x9f, 0x0a, 0xb3, 0x32, 0xf6, 0x08, 0x9a, 0x52, 0x32, 0x96,
+-      0xde, 0x39, 0xa9, 0xe0, 0x4b, 0xd5, 0x48, 0x30, 0x37, 0xc1, 0xa8, 0xd4,
+-      0x33, 0x36, 0x73, 0x90, 0xea, 0x37, 0x25, 0x3f, 0x76, 0x13, 0x0f, 0x7b,
+-      0x89, 0x87, 0xc2, 0x99, 0xa5, 0xd7, 0xe9, 0xe2, 0xd1, 0xd6, 0x82, 0xac,
+-      0x8b, 0xac, 0x89, 0xac, 0xcd, 0x21, 0xdc, 0x6b, 0x49, 0xdd, 0x6e, 0x63,
+-      0xca, 0x48, 0xc4, 0x9e, 0x83, 0xac, 0xd3, 0x21, 0xda, 0xc2, 0x8f, 0x7d,
+-      0xc4, 0xbf, 0xbd, 0x2d, 0xb4, 0x55, 0xd8, 0x8f, 0xbd, 0x4e, 0x1f, 0xa0,
+-      0x6c, 0x3f, 0x3f, 0xd7, 0x50, 0x61, 0x4e, 0xfb, 0xaa, 0xdf, 0xb5, 0xa3,
+-      0xdb, 0x57, 0xf4, 0x9a, 0x32, 0x5e, 0xb9, 0xa7, 0xe8, 0xda, 0x6e, 0x7b,
+-      0x56, 0xc6, 0xb5, 0x71, 0xd6, 0x70, 0xb9, 0x69, 0xd9, 0x66, 0x82, 0xed,
+-      0x4b, 0x36, 0x02, 0x6b, 0x6f, 0xe0, 0xa7, 0x55, 0xbc, 0xd6, 0x75, 0x9d,
+-      0x9f, 0xf6, 0x09, 0x07, 0x26, 0x3f, 0xed, 0xdc, 0x49, 0x7e, 0xda, 0xa0,
+-      0x94, 0xb9, 0xa9, 0xf4, 0x14, 0xca, 0xfc, 0xb4, 0xb6, 0x84, 0xcd, 0x87,
+-      0xb0, 0x97, 0xdc, 0xa5, 0xae, 0x61, 0x04, 0x81, 0x75, 0x9e, 0x4f, 0x3d,
+-      0x18, 0x61, 0xed, 0x51, 0x01, 0x2c, 0xb3, 0xb1, 0x72, 0x7d, 0xc6, 0xae,
+-      0xd4, 0x1b, 0x62, 0x95, 0x1e, 0xe9, 0x19, 0x27, 0x32, 0x63, 0xc4, 0x12,
+-      0xcf, 0x3a, 0x2d, 0x93, 0x46, 0x40, 0x5d, 0xa2, 0xdf, 0x5d, 0xaa, 0x09,
+-      0xa2, 0x81, 0x1d, 0xe4, 0x36, 0x89, 0xd4, 0x2f, 0xed, 0x99, 0xc8, 0x08,
+-      0xa2, 0xeb, 0x8a, 0xc3, 0x51, 0xa4, 0x0f, 0x46, 0x1d, 0x5c, 0x99, 0x40,
+-      0x3e, 0x11, 0x0d, 0x74, 0x17, 0x32, 0xc1, 0xae, 0xc6, 0x18, 0x76, 0x4e,
+-      0x76, 0xb0, 0xe6, 0xd0, 0xb1, 0x6d, 0xb2, 0x93, 0xf5, 0x51, 0x8f, 0xd2,
+-      0x33, 0x2b, 0xf6, 0x11, 0xfb, 0x6a, 0x6a, 0xcc, 0x73, 0x63, 0x2f, 0xb3,
+-      0x5c, 0xcf, 0xbe, 0xef, 0xf8, 0xce, 0xb8, 0xa1, 0xd2, 0x2e, 0xff, 0xdb,
+-      0x8f, 0xb0, 0x8d, 0x33, 0x86, 0xf8, 0x1c, 0xbf, 0xb3, 0xb6, 0xda, 0xda,
+-      0x32, 0x65, 0xfb, 0x74, 0xe9, 0x49, 0x47, 0x9d, 0xf5, 0x92, 0x1a, 0xab,
+-      0x63, 0xb6, 0x97, 0x6b, 0x54, 0xee, 0x3f, 0xdf, 0xb8, 0x56, 0x9b, 0x83,
+-      0x5b, 0x89, 0x67, 0xac, 0xc7, 0x02, 0x01, 0x62, 0x64, 0xe0, 0x94, 0x8d,
+-      0x59, 0xe3, 0x1d, 0xfb, 0x49, 0xdd, 0xc7, 0xf5, 0xb8, 0x95, 0x78, 0x2b,
+-      0xfc, 0xc3, 0x0c, 0xee, 0x9a, 0xf6, 0x79, 0x58, 0x5b, 0xb5, 0x54, 0xc0,
+-      0xa9, 0xad, 0x9c, 0x3e, 0xe1, 0xb1, 0xfc, 0x6d, 0xc1, 0xae, 0x1c, 0xeb,
+-      0x04, 0xd6, 0xa9, 0x6e, 0x8d, 0x76, 0x6b, 0xf0, 0x9e, 0x9c, 0x57, 0xa9,
+-      0x33, 0xe1, 0x6d, 0xdd, 0x68, 0xe3, 0xe3, 0xf5, 0x89, 0xe1, 0xa8, 0x87,
+-      0xd8, 0xc8, 0xb1, 0xac, 0x7c, 0x4b, 0xb0, 0x8f, 0x58, 0x7c, 0x7b, 0x0e,
+-      0x69, 0xe9, 0xa9, 0x86, 0xd7, 0x8f, 0xf6, 0x87, 0x21, 0xfd, 0x2f, 0x7c,
+-      0x89, 0xd1, 0x18, 0xa1, 0xaf, 0x45, 0xdb, 0x95, 0xc4, 0xe2, 0x20, 0x12,
+-      0x17, 0x3e, 0xf6, 0xbe, 0x63, 0x3f, 0x9d, 0xdf, 0xc8, 0xe7, 0x3b, 0x89,
+-      0x93, 0x69, 0xe2, 0xe6, 0xe8, 0xb0, 0x1f, 0xf2, 0x8e, 0xd6, 0xf7, 0xb6,
+-      0x12, 0xa7, 0x8f, 0xe3, 0x77, 0xf8, 0xbc, 0xba, 0x8d, 0x18, 0x39, 0x6b,
+-      0x24, 0xd2, 0x5b, 0x90, 0xe9, 0xac, 0x85, 0x66, 0x34, 0x2a, 0xd2, 0xaf,
+-      0x12, 0xfb, 0x27, 0xf1, 0x3d, 0xce, 0xe9, 0xd3, 0xc5, 0x8e, 0x9b, 0x31,
+-      0x30, 0xab, 0xa9, 0xd7, 0xfd, 0x4c, 0x6c, 0x20, 0x76, 0xe9, 0xa8, 0x40,
+-      0xd5, 0x52, 0xea, 0xf6, 0x3d, 0x07, 0x4f, 0x82, 0xba, 0x8e, 0xff, 0x42,
+-      0x1e, 0xf4, 0x17, 0x05, 0xe9, 0x4b, 0x96, 0xb9, 0x9d, 0xf8, 0x44, 0x73,
+-      0xdb, 0x2d, 0x33, 0xc9, 0x52, 0x9f, 0x32, 0x10, 0xec, 0x9c, 0xb6, 0x71,
+-      0xd2, 0x08, 0x43, 0xea, 0xf3, 0xca, 0x54, 0x91, 0x19, 0xbf, 0x19, 0xdb,
+-      0x78, 0xbd, 0x63, 0xba, 0x5a, 0xe9, 0xc8, 0xd9, 0xf8, 0xa6, 0xa1, 0x65,
+-      0xda, 0xbd, 0x8c, 0x65, 0x43, 0x3b, 0x0b, 0x5c, 0x26, 0x27, 0x12, 0xdf,
+-      0xf2, 0x21, 0xa4, 0xbb, 0x63, 0x35, 0xcf, 0xdc, 0x46, 0xbe, 0x20, 0xb1,
+-      0xe5, 0x5d, 0x53, 0x85, 0x94, 0x32, 0xe3, 0x13, 0xbb, 0x75, 0x22, 0x5d,
+-      0xa8, 0x56, 0x76, 0xd3, 0x96, 0x77, 0xac, 0xab, 0xc0, 0x25, 0xc7, 0x96,
+-      0xb7, 0xd1, 0x96, 0x78, 0x6b, 0x05, 0xbc, 0xe7, 0xeb, 0xd0, 0xa9, 0xc0,
+-      0xa9, 0xbd, 0xaa, 0x99, 0x9f, 0xd3, 0xe4, 0xae, 0xe4, 0x7d, 0x6a, 0x2f,
+-      0xbe, 0x42, 0x9c, 0x79, 0x92, 0x3e, 0xfa, 0x33, 0xbd, 0x19, 0x55, 0x5f,
+-      0x6d, 0xe1, 0x3a, 0x6e, 0x0c, 0xee, 0xc8, 0xf5, 0xe1, 0xa9, 0x79, 0x1b,
+-      0xcf, 0x31, 0x3e, 0x1a, 0x53, 0x19, 0xb5, 0x92, 0xb5, 0x18, 0x73, 0xd9,
+-      0xe2, 0x09, 0xc7, 0xbf, 0x57, 0xb6, 0x6d, 0x9e, 0x8b, 0xc2, 0xfb, 0x15,
+-      0xf9, 0xbb, 0xbe, 0x2d, 0x36, 0x27, 0x9f, 0x51, 0x7e, 0xda, 0x18, 0x32,
+-      0xb4, 0xf4, 0xc7, 0xde, 0x2a, 0x54, 0x27, 0x6c, 0x7b, 0x28, 0x25, 0xd7,
+-      0xf5, 0xb6, 0xa4, 0x73, 0xbf, 0x81, 0x9f, 0xe5, 0x3e, 0xf2, 0xeb, 0xc2,
+-      0xf9, 0x62, 0x69, 0xea, 0xbc, 0x93, 0x79, 0xbd, 0x8f, 0x79, 0xbd, 0xce,
+-      0xd4, 0xd2, 0x7b, 0xbc, 0xd2, 0x3b, 0x29, 0x1e, 0xac, 0xe5, 0xf5, 0x5d,
+-      0xa5, 0xbc, 0x5e, 0x73, 0x4a, 0xfa, 0x70, 0xe4, 0x7a, 0x70, 0xf7, 0x2f,
+-      0xba, 0x99, 0xd7, 0xab, 0x26, 0x7d, 0xe8, 0x62, 0x4e, 0xf7, 0x93, 0x67,
+-      0x6f, 0xcd, 0xd7, 0x21, 0x78, 0xc2, 0x8b, 0x78, 0xea, 0xdb, 0x38, 0x48,
+-      0x1f, 0x3b, 0x98, 0xf4, 0x2a, 0xb1, 0xe5, 0x1e, 0xda, 0xe9, 0x9f, 0x70,
+-      0x40, 0xf5, 0xa2, 0x46, 0xff, 0x2e, 0x1e, 0xfa, 0x35, 0xb9, 0xbc, 0x2f,
+-      0x27, 0x31, 0xbd, 0xb2, 0xad, 0xeb, 0x94, 0x9b, 0xcb, 0x43, 0xa7, 0x46,
+-      0x17, 0x25, 0x97, 0xd7, 0xad, 0xef, 0xc3, 0xe9, 0x69, 0xfc, 0xe1, 0x0a,
+-      0x92, 0xc4, 0x3a, 0xce, 0xd9, 0x90, 0x4a, 0xb0, 0x6e, 0xd6, 0x06, 0xb7,
+-      0x29, 0x89, 0x89, 0x1a, 0xc6, 0xfe, 0x69, 0xe6, 0xf2, 0x80, 0x99, 0x50,
+-      0x93, 0x1e, 0x74, 0xfb, 0xb9, 0x1e, 0x1f, 0xb0, 0x86, 0xfe, 0x61, 0x3e,
+-      0xc6, 0x31, 0x2b, 0xe0, 0x63, 0x2e, 0xff, 0x40, 0xc7, 0xa7, 0x5e, 0xfa,
+-      0xde, 0x65, 0x6f, 0x00, 0x57, 0xf3, 0x6e, 0x2e, 0xaf, 0x6d, 0xb4, 0x47,
+-      0xae, 0xa4, 0x42, 0xf8, 0x30, 0x6f, 0xd0, 0x07, 0xfb, 0x70, 0x84, 0xb9,
+-      0xfc, 0x8a, 0xae, 0xe2, 0xa7, 0xf9, 0x56, 0xfa, 0x65, 0x04, 0x3f, 0x21,
+-      0xcf, 0x5d, 0xc7, 0x5c, 0x7e, 0x27, 0x7d, 0x2a, 0xc5, 0x5c, 0xde, 0xee,
+-      0xf0, 0x8c, 0xe6, 0xb6, 0x33, 0x53, 0x4e, 0x2e, 0x6f, 0x64, 0x89, 0x5f,
+-      0xef, 0x47, 0x62, 0x91, 0xf8, 0x60, 0xff, 0x6c, 0x63, 0x88, 0xcf, 0xd2,
+-      0x6e, 0x85, 0xf5, 0x98, 0x71, 0x72, 0xcf, 0xe6, 0xe0, 0x6e, 0xce, 0xbd,
+-      0xcc, 0x89, 0x33, 0x1b, 0x3b, 0xd7, 0xbd, 0x89, 0x3f, 0x58, 0xe2, 0xa1,
+-      0x1f, 0x9a, 0xc1, 0x3b, 0x18, 0x6b, 0x61, 0xfa, 0xd7, 0x4f, 0x53, 0x89,
+-      0xfe, 0x73, 0xac, 0x21, 0x7f, 0xc2, 0x38, 0xbb, 0x93, 0xbe, 0xb1, 0x72,
+-      0x5d, 0x80, 0xeb, 0xee, 0xc6, 0x59, 0x07, 0xe3, 0x2c, 0xca, 0x38, 0x5b,
+-      0xc1, 0x38, 0x7b, 0xda, 0x48, 0x24, 0x37, 0x93, 0x6f, 0xbd, 0x9e, 0x97,
+-      0x58, 0x6b, 0xe1, 0xb8, 0x1a, 0xf5, 0x1a, 0xed, 0x97, 0x98, 0xd9, 0xb9,
+-      0x6e, 0xf4, 0x6c, 0x35, 0xc4, 0x56, 0xf8, 0x74, 0x19, 0xb9, 0x05, 0x11,
+-      0xe9, 0xc2, 0xa2, 0x37, 0x31, 0xbc, 0xca, 0x9b, 0x18, 0x7a, 0x5f, 0x79,
+-      0xc7, 0x7e, 0x8b, 0x71, 0x76, 0x3b, 0xe3, 0x6c, 0x37, 0xe3, 0xac, 0xdd,
+-      0xb2, 0xf1, 0x52, 0x4a, 0xeb, 0x6b, 0xf6, 0xc4, 0x8d, 0x76, 0x0f, 0x56,
+-      0x54, 0x33, 0x25, 0x04, 0x91, 0xe8, 0xfc, 0x03, 0xca, 0x7f, 0xc1, 0x48,
+-      0xf4, 0x24, 0x15, 0x89, 0xad, 0x18, 0x7e, 0x4c, 0xbd, 0x2b, 0x4b, 0xb1,
+-      0xb5, 0x7f, 0xf6, 0xd5, 0x92, 0x6f, 0x94, 0x75, 0xf7, 0xe2, 0x45, 0x83,
+-      0x18, 0xba, 0x54, 0x8b, 0x65, 0x3c, 0xbd, 0x98, 0xa0, 0x1d, 0x83, 0x89,
+-      0x5e, 0x1c, 0x65, 0x1e, 0xbc, 0x9f, 0xf9, 0xf7, 0x01, 0x2b, 0xde, 0xba,
+-      0x83, 0x75, 0xce, 0xa5, 0xa8, 0x16, 0x8b, 0x29, 0xbd, 0x18, 0xa0, 0x0f,
+-      0x0f, 0x30, 0x5f, 0xb4, 0x5b, 0x3f, 0x57, 0xb6, 0x91, 0x23, 0xdc, 0x57,
+-      0x90, 0xf7, 0xb4, 0x64, 0xbf, 0x67, 0x10, 0xfd, 0xf3, 0x82, 0x6d, 0x50,
+-      0x6f, 0x32, 0x7b, 0x71, 0xdc, 0xaa, 0x40, 0x6f, 0x4b, 0xb7, 0xb2, 0xab,
+-      0x20, 0xbd, 0x33, 0xc6, 0xa3, 0xc5, 0x78, 0x75, 0xe4, 0x55, 0x88, 0xa5,
+-      0xdd, 0xc8, 0x4a, 0x7c, 0x5a, 0xbb, 0x95, 0x3b, 0x67, 0x25, 0xc6, 0x7b,
+-      0x95, 0x5e, 0x89, 0x61, 0x6b, 0x58, 0xb9, 0x4b, 0x62, 0xda, 0xe9, 0x33,
+-      0x4b, 0xdc, 0xcb, 0x3e, 0xc4, 0x6d, 0xe4, 0x6f, 0x60, 0x4c, 0x79, 0xbf,
+-      0x1a, 0x65, 0xdc, 0xb5, 0x57, 0x78, 0xe8, 0xa7, 0x71, 0xae, 0x9d, 0x07,
+-      0x1d, 0xc6, 0x6f, 0xda, 0x19, 0xb5, 0x9f, 0x31, 0xd5, 0x8b, 0x23, 0xd6,
+-      0x6f, 0xd8, 0x57, 0x1c, 0x5e, 0x52, 0xc6, 0xf3, 0xcd, 0xb8, 0x37, 0xb7,
+-      0x1c, 0x01, 0x5d, 0xf2, 0x75, 0x08, 0xc9, 0x25, 0x01, 0x54, 0xe9, 0x92,
+-      0x67, 0x9a, 0xdb, 0x16, 0x4e, 0x50, 0x86, 0x0d, 0xe5, 0xf8, 0xde, 0x8c,
+-      0x07, 0x89, 0x03, 0xfb, 0x52, 0xf7, 0xe2, 0x01, 0xb5, 0x0a, 0x61, 0xda,
+-      0xe9, 0x61, 0x35, 0x44, 0x7c, 0xfd, 0xbd, 0xd2, 0x38, 0xff, 0xa9, 0xa2,
+-      0x54, 0x33, 0x5f, 0xe3, 0x54, 0x75, 0x8c, 0xb1, 0x4d, 0xd3, 0x52, 0x9b,
+-      0x44, 0xdb, 0xa2, 0xd3, 0x3a, 0xc2, 0xac, 0x55, 0x37, 0xa7, 0xb4, 0xe1,
+-      0xcd, 0xde, 0xf8, 0xe0, 0xa2, 0x82, 0x6c, 0x98, 0x7c, 0x2e, 0x9f, 0x48,
+-      0xf4, 0x34, 0x8b, 0x8d, 0xf5, 0x28, 0xb6, 0xd3, 0x4e, 0x5d, 0xf9, 0x08,
+-      0x63, 0xe8, 0xbd, 0x0a, 0xe1, 0x46, 0xe9, 0xfc, 0xf5, 0xb1, 0xa2, 0x1c,
+-      0x2b, 0x3a, 0x2d, 0x3c, 0x2d, 0x4a, 0x9e, 0xa6, 0x33, 0x0e, 0x6d, 0x7b,
+-      0x13, 0xf9, 0x59, 0xe8, 0x94, 0xd4, 0x38, 0xf1, 0x09, 0x72, 0xda, 0x66,
+-      0xf2, 0xdd, 0x5e, 0x7a, 0xb5, 0xbd, 0xb2, 0x21, 0x61, 0xb4, 0x2b, 0x78,
+-      0x62, 0xae, 0x85, 0xf5, 0x11, 0xc7, 0xbc, 0x9c, 0x57, 0x71, 0x25, 0x1f,
+-      0xc5, 0xbb, 0x1c, 0xfb, 0x92, 0x33, 0x76, 0x3d, 0x7e, 0x54, 0xc2, 0xad,
+-      0x14, 0x71, 0x6b, 0x4b, 0x4e, 0xa1, 0xbf, 0xc6, 0x30, 0x62, 0xfc, 0xdd,
+-      0xa7, 0x97, 0x6e, 0x0e, 0xd0, 0x6e, 0xa2, 0x8b, 0x8f, 0x9f, 0xe3, 0x78,
+-      0xd8, 0xc1, 0xe9, 0x37, 0x3f, 0x9d, 0x59, 0xc2, 0xb5, 0xa2, 0xed, 0x6b,
+-      0x4b, 0xef, 0xad, 0x9d, 0xf9, 0xf3, 0x92, 0xbe, 0x3a, 0x3c, 0xa7, 0x92,
+-      0xa8, 0x38, 0x75, 0x4d, 0x56, 0x5d, 0xe2, 0x83, 0x19, 0xf5, 0x89, 0xaf,
+-      0x71, 0xfe, 0xc7, 0xc8, 0xf5, 0x6c, 0xce, 0x7f, 0xd5, 0x99, 0x37, 0xc2,
+-      0x79, 0x95, 0x6b, 0xbc, 0x30, 0x7a, 0xed, 0x1d, 0x95, 0xba, 0xe3, 0xf1,
+-      0x28, 0x6d, 0xf7, 0xe1, 0x06, 0x79, 0x2e, 0x84, 0x5d, 0xf9, 0x15, 0x95,
+-      0x82, 0xe3, 0x41, 0xd6, 0x01, 0xae, 0x2f, 0x91, 0xe7, 0x59, 0xcf, 0xf1,
+-      0x9e, 0xf0, 0xae, 0xcd, 0xe4, 0x18, 0x9f, 0xb5, 0x7b, 0x84, 0x6b, 0xf1,
+-      0x7f, 0xf8, 0x8e, 0xdc, 0xfb, 0x75, 0x79, 0xf4, 0x4f, 0x31, 0xcc, 0x1a,
+-      0xe8, 0xb1, 0x5c, 0x06, 0x0f, 0xe7, 0xbe, 0xec, 0xec, 0xab, 0xad, 0x5d,
+-      0x8f, 0xfb, 0x38, 0xe7, 0x81, 0x5a, 0xc6, 0xd1, 0x7f, 0x4b, 0x25, 0x84,
+-      0x1b, 0xed, 0xae, 0x86, 0xe4, 0xda, 0x44, 0xeb, 0x2a, 0xc5, 0x46, 0x45,
+-      0x0a, 0x43, 0x1d, 0x2d, 0x89, 0xe4, 0x15, 0x3c, 0x61, 0x4b, 0x5f, 0xd3,
+-      0x5b, 0xca, 0xbb, 0x52, 0xff, 0x49, 0x6f, 0xb5, 0xbd, 0xc4, 0x91, 0xb6,
+-      0x14, 0xde, 0xf9, 0x4c, 0xef, 0x40, 0xea, 0x6e, 0xc9, 0x37, 0x41, 0xa5,
+-      0x9d, 0xf3, 0x1c, 0x21, 0x66, 0xbf, 0x68, 0xbc, 0x12, 0x65, 0x36, 0x86,
+-      0x6f, 0x9d, 0x82, 0x83, 0x86, 0x1f, 0x99, 0x88, 0x8d, 0xdd, 0xfc, 0xdc,
+-      0x4f, 0xde, 0xf4, 0x9e, 0x51, 0x83, 0x19, 0x55, 0x25, 0x57, 0x24, 0x06,
+-      0x7b, 0xde, 0xf4, 0xcb, 0x5e, 0x4c, 0xcc, 0x23, 0xfb, 0xe6, 0xff, 0xd6,
+-      0x5e, 0xca, 0x3a, 0xf2, 0x16, 0xd1, 0x3d, 0xa8, 0x10, 0x43, 0x93, 0x20,
+-      0x97, 0xd9, 0x6b, 0x14, 0x63, 0x1e, 0xa4, 0xaf, 0x7a, 0xa0, 0x9d, 0xbe,
+-      0xcc, 0xfa, 0xee, 0xb1, 0x06, 0xed, 0x74, 0x9b, 0x57, 0xc7, 0xf0, 0xf1,
+-      0x00, 0x1e, 0x39, 0xbe, 0x0d, 0xb5, 0x4e, 0xef, 0x67, 0x9c, 0x36, 0xf5,
+-      0xb0, 0xae, 0x1a, 0xfd, 0xa5, 0x8f, 0xf5, 0xd5, 0xd5, 0xf5, 0x8f, 0xa3,
+-      0xd5, 0xb9, 0x3e, 0x86, 0xfb, 0x72, 0x41, 0xa5, 0x2b, 0xe7, 0xc3, 0xb6,
+-      0x3b, 0x1f, 0x87, 0x7f, 0x5d, 0x3f, 0xe5, 0x92, 0xeb, 0xf2, 0xf7, 0x5d,
+-      0xac, 0xcb, 0x44, 0xbe, 0x0a, 0xc4, 0x96, 0x53, 0xb6, 0x75, 0x3a, 0x46,
+-      0x8e, 0xfb, 0x94, 0x3d, 0xd6, 0x7f, 0xb7, 0xaf, 0x3a, 0xfb, 0x34, 0x72,
+-      0xad, 0x4a, 0xf6, 0xef, 0xf9, 0x8c, 0x60, 0xce, 0x00, 0x72, 0x8c, 0xed,
+-      0xbb, 0x9c, 0xf7, 0xff, 0xb8, 0xc2, 0xd5, 0x29, 0xcd, 0x7a, 0xb5, 0x83,
+-      0xeb, 0x27, 0xcf, 0x24, 0x4b, 0xd7, 0x9a, 0x03, 0xee, 0x19, 0x01, 0xf1,
+-      0x85, 0x01, 0xdc, 0xc2, 0x45, 0x68, 0x48, 0x88, 0x8f, 0x0d, 0xa0, 0x21,
+-      0x4f, 0x40, 0x5d, 0xee, 0xca, 0xfb, 0x90, 0x55, 0x64, 0xad, 0xa9, 0x13,
+-      0x37, 0x69, 0xbb, 0x65, 0xf2, 0xfe, 0x2f, 0x2a, 0x7f, 0xf5, 0x7d, 0xc1,
+-      0x5b, 0x72, 0xcc, 0xb0, 0x70, 0xcd, 0x5f, 0x77, 0xff, 0xb7, 0x20, 0xf7,
+-      0x7c, 0xfa, 0x9f, 0x30, 0x8e, 0x13, 0x3d, 0xd5, 0x1e, 0xf1, 0x9f, 0x3f,
+-      0xc1, 0x03, 0xb3, 0x8f, 0xf0, 0xbe, 0x8c, 0x7f, 0x88, 0x35, 0x84, 0x4f,
+-      0xe9, 0x24, 0xfe, 0xec, 0x3f, 0xee, 0xd9, 0x55, 0x81, 0xbf, 0xb4, 0x2b,
+-      0x97, 0x8d, 0xa0, 0x21, 0x35, 0xc6, 0xe7, 0x15, 0x74, 0x90, 0x2f, 0x3e,
+-      0x65, 0x6c, 0xc1, 0xb6, 0x25, 0x82, 0x01, 0x2f, 0xda, 0x03, 0xbd, 0x62,
+-      0x43, 0x05, 0x5b, 0x79, 0xfd, 0x25, 0xae, 0xef, 0xb3, 0x86, 0x0f, 0x0d,
+-      0x4b, 0xa5, 0x8f, 0xa7, 0x4d, 0xa5, 0xd1, 0x1e, 0x70, 0xf7, 0xab, 0x32,
+-      0x76, 0xad, 0xae, 0x0f, 0xdd, 0xe1, 0x69, 0x98, 0x7a, 0x9b, 0xfe, 0xd4,
+-      0xbe, 0xee, 0xc6, 0x7b, 0x65, 0x9b, 0x18, 0xe4, 0x90, 0x2f, 0xd8, 0xb8,
+-      0x69, 0x14, 0xea, 0xba, 0x1b, 0xd7, 0xbf, 0x2c, 0xf7, 0x21, 0xc6, 0x20,
+-      0x32, 0xb5, 0xa6, 0xf4, 0x79, 0x12, 0x1c, 0xe7, 0x10, 0x7e, 0xbf, 0x30,
+-      0x86, 0x83, 0xb9, 0x12, 0xa7, 0xa6, 0x6f, 0xeb, 0xeb, 0xae, 0xeb, 0xf6,
+-      0x50, 0x2e, 0xd1, 0x5f, 0x53, 0xd2, 0xed, 0x00, 0xeb, 0x8b, 0x6a, 0x62,
+-      0xec, 0x83, 0xb4, 0xe9, 0x90, 0x63, 0xd3, 0x5e, 0x18, 0xf9, 0xeb, 0xe3,
+-      0x0e, 0x72, 0xdc, 0xa0, 0x29, 0x76, 0x93, 0x3d, 0xb2, 0x43, 0xd8, 0xcf,
+-      0x71, 0xf7, 0xdd, 0x30, 0xee, 0x80, 0x71, 0x7d, 0xdc, 0xbd, 0xb9, 0xc4,
+-      0x69, 0x4f, 0x69, 0xdc, 0x47, 0x67, 0xcb, 0x63, 0x64, 0x70, 0xfb, 0xba,
+-      0x0c, 0xf2, 0x9b, 0x0e, 0xd8, 0x07, 0x1c, 0x7b, 0x9c, 0x72, 0xae, 0x6f,
+-      0x6d, 0x10, 0xee, 0xc5, 0x3f, 0x4d, 0xd9, 0x8f, 0x4f, 0x92, 0x7b, 0xe9,
+-      0xce, 0x9e, 0xf0, 0x37, 0x0a, 0xe5, 0xbe, 0x94, 0xf6, 0x4e, 0x97, 0x37,
+-      0xcd, 0xd8, 0x8e, 0x04, 0x76, 0x7c, 0xa6, 0x97, 0xb1, 0x8d, 0xf5, 0xd7,
+-      0x76, 0xab, 0x3b, 0xd8, 0x69, 0x05, 0xc8, 0xbb, 0xaa, 0x95, 0xad, 0x39,
+-      0xe9, 0x69, 0x48, 0x2c, 0x97, 0xb8, 0x70, 0x41, 0xea, 0xbc, 0xbb, 0x59,
+-      0x1f, 0x2c, 0x0f, 0x20, 0xdc, 0x8f, 0x89, 0xc2, 0xef, 0x2a, 0xe9, 0x88,
+-      0xec, 0x4d, 0x4b, 0x5e, 0x01, 0x73, 0x5e, 0x0f, 0xaa, 0xe9, 0x4b, 0x11,
+-      0xd3, 0x30, 0x4f, 0x36, 0xd8, 0x20, 0x47, 0x09, 0x2c, 0x35, 0xd3, 0xe6,
+-      0xee, 0x06, 0x2f, 0x8e, 0x39, 0xfc, 0x4b, 0x9b, 0xe1, 0xef, 0x94, 0xc4,
+-      0xcc, 0x1d, 0x39, 0xc9, 0x63, 0xa4, 0x90, 0xfa, 0x08, 0xfe, 0x31, 0x55,
+-      0x1c, 0x5a, 0x82, 0xf4, 0xfd, 0x4b, 0x20, 0xf5, 0xc4, 0x04, 0xfe, 0x4a,
+-      0x8f, 0x06, 0xfa, 0x0a, 0x3e, 0xa5, 0xcb, 0x9a, 0x0b, 0xee, 0xb4, 0xc2,
+-      0x08, 0xb1, 0x1e, 0xeb, 0xf6, 0xc6, 0x59, 0x5f, 0x88, 0x1d, 0x03, 0x6d,
+-      0xb7, 0xe4, 0xfb, 0x82, 0x1d, 0x96, 0x8b, 0x85, 0x2b, 0x67, 0x02, 0xc1,
+-      0x6d, 0xd3, 0xf1, 0xe8, 0x84, 0xc3, 0xc5, 0x42, 0x6d, 0xf1, 0xbc, 0x6d,
+-      0xbf, 0x61, 0x14, 0xaf, 0x56, 0x3a, 0xdf, 0x8d, 0xb6, 0x64, 0xbe, 0x19,
+-      0xf7, 0x90, 0x3f, 0xb5, 0x4f, 0x37, 0xc3, 0x98, 0x06, 0x4e, 0x1c, 0x8f,
+-      0x62, 0x6d, 0x4e, 0x3b, 0x3d, 0xec, 0xed, 0xc3, 0xd4, 0x7c, 0x27, 0x72,
+-      0x85, 0xe0, 0x62, 0xcc, 0x43, 0x5e, 0x9d, 0xf2, 0x60, 0x97, 0x71, 0x5c,
+-      0x29, 0x2e, 0x53, 0x70, 0x17, 0x11, 0xbc, 0xdf, 0xe1, 0x13, 0x73, 0xac,
+-      0x47, 0x15, 0xdc, 0xe4, 0xe0, 0x6e, 0x4b, 0xdb, 0x5a, 0xf2, 0xed, 0x3b,
+-      0xc9, 0x07, 0x77, 0x11, 0x57, 0x12, 0xeb, 0x6c, 0xbc, 0x99, 0xca, 0xf4,
+-      0xd7, 0x40, 0xeb, 0x39, 0xcc, 0x1a, 0xa8, 0x47, 0x71, 0xf9, 0x5d, 0xd3,
+-      0x9c, 0xcb, 0x09, 0x57, 0xcd, 0xb5, 0x90, 0x37, 0xb2, 0xae, 0x49, 0x69,
+-      0x31, 0x8f, 0x47, 0xc5, 0x94, 0x33, 0x46, 0xac, 0xcd, 0x98, 0xab, 0x60,
+-      0xbe, 0xeb, 0xc5, 0xd3, 0x8e, 0xfc, 0x49, 0xca, 0x77, 0x37, 0xbe, 0x66,
+-      0xf5, 0x05, 0xfb, 0x2c, 0xd9, 0xbf, 0x8c, 0x27, 0xaf, 0x7a, 0x4d, 0xf2,
+-      0xd7, 0x78, 0xac, 0xce, 0xfb, 0x05, 0x25, 0xe3, 0x6b, 0x6a, 0x9d, 0x83,
+-      0xa9, 0x5c, 0x2a, 0x71, 0x36, 0xd1, 0x2f, 0x41, 0x8e, 0xd5, 0x7e, 0x3c,
+-      0xb8, 0x98, 0x86, 0xdb, 0xb3, 0xd9, 0x66, 0xfc, 0x2f, 0x14, 0x23, 0xda,
+-      0x44, 0x9a, 0x18, 0xb0, 0x85, 0x98, 0xdb, 0xdf, 0xeb, 0xe3, 0x7d, 0xe9,
+-      0x79, 0xa9, 0x6d, 0xe3, 0x59, 0x14, 0x83, 0x66, 0x22, 0x73, 0x94, 0x9e,
+-      0xd3, 0x53, 0x90, 0xfd, 0x8d, 0x00, 0x1e, 0x60, 0xed, 0x94, 0x2e, 0xed,
+-      0xfd, 0x6c, 0x9d, 0x76, 0xf7, 0xb3, 0x0e, 0xcf, 0xfb, 0xc2, 0xdd, 0x56,
+-      0x0b, 0xf3, 0xbd, 0xef, 0x86, 0xb1, 0x13, 0x13, 0x2b, 0x3d, 0x1e, 0xac,
+-      0x5e, 0xb7, 0x47, 0x99, 0x59, 0x56, 0xce, 0xad, 0x51, 0x27, 0x1f, 0x56,
+-      0x50, 0xcf, 0xf3, 0x27, 0x65, 0x8e, 0xcf, 0xb5, 0x8d, 0x9f, 0x94, 0x5c,
+-      0xab, 0xb6, 0x6d, 0xb2, 0xb4, 0x3e, 0xa9, 0xfd, 0xa2, 0xb4, 0x53, 0x94,
+-      0xba, 0xad, 0x30, 0xd7, 0xb4, 0xd9, 0xd3, 0x5a, 0x74, 0x40, 0x49, 0x93,
+-      0xf7, 0x69, 0xc9, 0x5b, 0xbc, 0x1e, 0x3c, 0xa2, 0x6b, 0x83, 0xd2, 0x13,
+-      0x7c, 0x19, 0x2e, 0x07, 0x6e, 0x9a, 0x1b, 0x60, 0x5e, 0x73, 0x6d, 0xeb,
+-      0xf6, 0x07, 0xeb, 0xdb, 0x9a, 0x1d, 0x5e, 0x6c, 0xdb, 0x97, 0x53, 0xdd,
+-      0xe4, 0x0c, 0xc2, 0x8b, 0xe5, 0xfa, 0xea, 0xb6, 0xc6, 0x99, 0x00, 0x65,
+-      0x53, 0xf0, 0x3e, 0x73, 0xd2, 0x44, 0xa1, 0x2c, 0xa3, 0xcb, 0x99, 0x77,
+-      0x90, 0x33, 0x57, 0x99, 0x5a, 0x6b, 0x17, 0x39, 0xb3, 0x9e, 0x2a, 0xd6,
+-      0xf9, 0xd0, 0x8b, 0xa7, 0xac, 0x66, 0x39, 0xe3, 0xe4, 0xf0, 0xe6, 0x2b,
+-      0x27, 0xb5, 0xb4, 0x70, 0xe6, 0x1f, 0x18, 0xc0, 0x3d, 0xe4, 0xcc, 0x57,
+-      0xb3, 0x3e, 0xec, 0x21, 0x67, 0x5e, 0xcc, 0x06, 0xd0, 0x47, 0xce, 0xfc,
+-      0x11, 0xf9, 0xd5, 0xbb, 0xa9, 0x2b, 0x78, 0xb4, 0xd4, 0x07, 0xdb, 0x9b,
+-      0xf4, 0xd0, 0xaf, 0x85, 0x37, 0xff, 0xbc, 0xc4, 0x9b, 0xe7, 0xff, 0x05,
+-      0x6f, 0xde, 0x4a, 0x3e, 0xd8, 0x9d, 0x13, 0x4e, 0xb0, 0x92, 0x9c, 0xc0,
+-      0xc6, 0xcb, 0xa5, 0x1e, 0xd8, 0x0a, 0xe6, 0xb3, 0xa7, 0x53, 0x7d, 0xc8,
+-      0x4e, 0x63, 0x79, 0x8d, 0xd3, 0x77, 0x12, 0x99, 0x34, 0xe3, 0xb2, 0x92,
+-      0xe8, 0xec, 0x43, 0x82, 0xf5, 0xb1, 0x96, 0xbc, 0xe8, 0xf6, 0xc0, 0x16,
+-      0xdf, 0x85, 0xf4, 0x88, 0x7c, 0xa8, 0x59, 0x00, 0x56, 0xdc, 0xd0, 0x03,
+-      0xab, 0x49, 0xe0, 0x4f, 0xeb, 0x20, 0xfb, 0x9a, 0x0c, 0xb3, 0x85, 0x66,
+-      0xc6, 0xa7, 0x82, 0x23, 0x89, 0x10, 0xba, 0x8f, 0x93, 0xf3, 0x38, 0x3d,
+-      0x30, 0x7b, 0xe4, 0x3b, 0x46, 0x1f, 0x8e, 0xce, 0xbb, 0x3d, 0xb0, 0xed,
+-      0xe4, 0x6e, 0xbe, 0x44, 0x04, 0x95, 0x0b, 0x3e, 0xbc, 0x40, 0xee, 0xbc,
+-      0x95, 0xeb, 0x7c, 0xa6, 0xd4, 0x07, 0x5b, 0xc1, 0x18, 0xb1, 0x73, 0x2a,
+-      0x66, 0x16, 0xf0, 0x86, 0x17, 0xb8, 0xb8, 0xc2, 0xe9, 0xed, 0x4b, 0xff,
+-      0x3f, 0x84, 0x73, 0x0e, 0x77, 0x0e, 0x2e, 0x66, 0x14, 0x57, 0xb7, 0x0a,
+-      0xae, 0x89, 0xac, 0xab, 0x87, 0xeb, 0xda, 0x7e, 0x52, 0xeb, 0x7c, 0x85,
+-      0xb6, 0x68, 0x4a, 0xbc, 0xea, 0xac, 0xc7, 0x40, 0x4a, 0x6a, 0xd9, 0x40,
+-      0x5b, 0xc0, 0x39, 0x0f, 0xa5, 0xb6, 0xfd, 0x28, 0x1b, 0xef, 0xa9, 0x2c,
+-      0xc5, 0xe3, 0xaa, 0x7c, 0x05, 0xd2, 0x25, 0x1f, 0x09, 0xd0, 0xa7, 0x03,
+-      0x93, 0x69, 0x54, 0x6d, 0x70, 0xfd, 0x7b, 0x55, 0x7e, 0x9c, 0xbc, 0xb5,
+-      0x53, 0xea, 0xe8, 0xf0, 0x76, 0xab, 0x13, 0x53, 0x56, 0x0c, 0x95, 0xe7,
+-      0x4a, 0x7b, 0xa6, 0xe7, 0xe4, 0xec, 0x5c, 0x7d, 0x9b, 0xfa, 0xd5, 0x32,
+-      0x1f, 0x4c, 0x93, 0xe3, 0x44, 0x02, 0x77, 0x14, 0x84, 0x2b, 0xf6, 0xe0,
+-      0xa8, 0xa5, 0x45, 0xbf, 0x87, 0xf8, 0xd0, 0xfd, 0xb4, 0x51, 0xb1, 0xee,
+-      0x7a, 0xbf, 0x69, 0x40, 0xfa, 0x51, 0x9f, 0xe9, 0x37, 0x0d, 0xe7, 0xf0,
+-      0x8b, 0xba, 0x96, 0x4a, 0x78, 0xd6, 0xfa, 0xc9, 0xe7, 0xb5, 0xe8, 0xd3,
+-      0x78, 0x02, 0x23, 0xb9, 0x9f, 0x2b, 0x21, 0xdd, 0x37, 0xf8, 0x13, 0xaf,
+-      0x16, 0x9d, 0x53, 0x42, 0x7c, 0xf7, 0xee, 0x60, 0x97, 0x75, 0x37, 0x71,
+-      0x27, 0x9e, 0xec, 0x54, 0xbc, 0x98, 0x89, 0x3a, 0x5c, 0x34, 0xd8, 0xc3,
+-      0x6b, 0x53, 0x85, 0x32, 0xa7, 0x71, 0x6b, 0xfe, 0xed, 0xc7, 0x5d, 0xfc,
+-      0x88, 0xe7, 0x83, 0x8b, 0x97, 0xe0, 0xea, 0x56, 0x4d, 0x5d, 0x1f, 0x9c,
+-      0x54, 0xed, 0xfe, 0x65, 0x12, 0xc3, 0x3a, 0xf6, 0xd0, 0xf7, 0xee, 0x99,
+-      0x1e, 0xa0, 0x9c, 0xc2, 0xa5, 0x57, 0x10, 0xa7, 0xfa, 0x30, 0x4e, 0x9c,
+-      0xb1, 0x28, 0x5f, 0x8e, 0x35, 0xe4, 0xe2, 0xfa, 0x8c, 0x3d, 0xb9, 0x41,
+-      0x37, 0x56, 0x7b, 0x8b, 0x4b, 0xa2, 0xe4, 0x36, 0xeb, 0x98, 0xb7, 0xdb,
+-      0x0b, 0xcd, 0xb8, 0x7c, 0x46, 0x67, 0x7d, 0xdb, 0x41, 0xee, 0xde, 0x83,
+-      0x87, 0xa9, 0xcf, 0xa3, 0x85, 0xc7, 0x91, 0xfe, 0x92, 0x0f, 0x87, 0x8f,
+-      0xa7, 0xb1, 0x6a, 0x5d, 0x0a, 0xe9, 0x2f, 0x06, 0x88, 0x53, 0x21, 0x4c,
+-      0x30, 0x16, 0xa1, 0xb8, 0x7e, 0x2e, 0xe7, 0x7f, 0xfe, 0x82, 0x36, 0xfb,
+-      0x26, 0xed, 0xf7, 0x8d, 0x6b, 0x7b, 0x00, 0x65, 0xfe, 0x7d, 0x9d, 0xab,
+-      0x7a, 0xb9, 0x86, 0xfb, 0x9c, 0xd8, 0x8c, 0x32, 0x36, 0x75, 0x5c, 0x2d,
+-      0xf5, 0x12, 0x17, 0x4f, 0x6a, 0x8b, 0xf7, 0x22, 0x3e, 0x7c, 0xd9, 0x8b,
+-      0x81, 0x3a, 0xfa, 0x5d, 0x94, 0x5c, 0xf5, 0xc3, 0x44, 0xc2, 0x38, 0x47,
+-      0xae, 0x3a, 0xba, 0xc1, 0xe5, 0xaa, 0x9e, 0x05, 0x15, 0x15, 0x0b, 0xac,
+-      0x65, 0x9d, 0x5e, 0xe2, 0x37, 0x83, 0x6e, 0x2f, 0x51, 0xf8, 0x4d, 0xab,
+-      0x9c, 0x75, 0xba, 0x8d, 0xb5, 0x5c, 0xfa, 0x0a, 0x32, 0xe8, 0x2c, 0xcc,
+-      0x04, 0xef, 0x21, 0x36, 0xf7, 0x49, 0x6f, 0xa4, 0x10, 0x09, 0xdf, 0x43,
+-      0xde, 0xf5, 0x2d, 0xae, 0xaf, 0xec, 0xed, 0xf6, 0x15, 0x56, 0xf3, 0xbd,
+-      0x28, 0x3f, 0x05, 0x57, 0x45, 0xf6, 0x1b, 0xf5, 0xe8, 0xa9, 0x92, 0xbd,
+-      0x86, 0x97, 0xa9, 0x43, 0xff, 0xdc, 0x4a, 0x3c, 0x3a, 0xe7, 0xaf, 0x12,
+-      0xc2, 0xff, 0x68, 0xde, 0xc5, 0xb6, 0x58, 0xfe, 0xae, 0xa0, 0xf0, 0xc9,
+-      0xf6, 0xe3, 0xee, 0x77, 0xfd, 0x86, 0xef, 0x65, 0xfd, 0x56, 0x50, 0x3f,
+-      0x7b, 0x5a, 0xea, 0xa2, 0x68, 0xdb, 0x19, 0xea, 0xb7, 0x78, 0xd2, 0x89,
+-      0x2f, 0xd6, 0x98, 0xf1, 0xe1, 0x84, 0x57, 0xf4, 0xfa, 0x99, 0xe8, 0x45,
+-      0xae, 0xc2, 0x78, 0xe1, 0xb8, 0x1e, 0x3d, 0xe2, 0xe8, 0xe5, 0xea, 0xe3,
+-      0xf6, 0x69, 0xaf, 0x9c, 0x4c, 0xde, 0xd8, 0x17, 0xd5, 0xc9, 0x97, 0x3f,
+-      0x61, 0x6c, 0x3c, 0x71, 0x98, 0x9c, 0xf9, 0x2a, 0x6b, 0x4a, 0x3f, 0x9f,
+-      0xaf, 0x73, 0x9e, 0x97, 0x3e, 0xad, 0xe7, 0x1a, 0x67, 0x5e, 0xbc, 0xfe,
+-      0x4e, 0x89, 0x2f, 0x4b, 0x4f, 0x5a, 0x9e, 0x53, 0x1d, 0x3b, 0xed, 0x76,
+-      0x78, 0xa0, 0x70, 0x2b, 0x1b, 0x1d, 0xeb, 0xfe, 0xad, 0x35, 0x0b, 0x2e,
+-      0xce, 0x38, 0x6e, 0xd5, 0x55, 0x25, 0x7b, 0xe1, 0xab, 0xd6, 0x3d, 0x68,
+-      0xbb, 0xfe, 0x1c, 0x09, 0xef, 0x62, 0x9c, 0x7c, 0x85, 0xef, 0xec, 0x3a,
+-      0x57, 0x1f, 0xbe, 0xcb, 0x6a, 0x71, 0x6c, 0x74, 0xd7, 0xb9, 0x28, 0x46,
+-      0x2d, 0xe9, 0xeb, 0x43, 0xf1, 0x99, 0x87, 0xb1, 0x7d, 0x2a, 0x86, 0x77,
+-      0x8d, 0x60, 0xe9, 0xec, 0x89, 0xc4, 0xa4, 0xc1, 0x98, 0x8c, 0xd0, 0x77,
+-      0xe3, 0xb1, 0x77, 0xc9, 0x51, 0x33, 0x3e, 0xe0, 0x68, 0x8e, 0xb8, 0x46,
+-      0xde, 0x08, 0xc5, 0x3d, 0xbb, 0xe9, 0xbe, 0x5b, 0xfe, 0xbb, 0x1a, 0xb1,
+-      0x25, 0xf1, 0xd6, 0xfd, 0xa8, 0x47, 0x96, 0xd8, 0x1f, 0xd4, 0xff, 0x1a,
+-      0xc7, 0x4e, 0x78, 0x98, 0x1f, 0x08, 0x4e, 0x77, 0x1a, 0xfc, 0xde, 0x34,
+-      0xf8, 0x01, 0xfe, 0xd1, 0x9e, 0x91, 0xf3, 0x51, 0x8a, 0x9c, 0xc5, 0xf8,
+-      0xc4, 0xae, 0xd3, 0xf5, 0xe2, 0xb7, 0xa0, 0x0f, 0x5f, 0x45, 0xd3, 0xd0,
+-      0x22, 0x7e, 0x6c, 0x17, 0x79, 0xef, 0x7d, 0xc6, 0xd1, 0x2b, 0x46, 0x3c,
+-      0xea, 0xa1, 0xf0, 0xc5, 0x88, 0x17, 0xf7, 0x1b, 0xb2, 0xa7, 0xa4, 0x0d,
+-      0x3d, 0x0f, 0x6d, 0xf0, 0xbc, 0x22, 0x67, 0x6a, 0x2e, 0xd9, 0x99, 0x25,
+-      0x32, 0xaf, 0x82, 0xb5, 0xab, 0x9b, 0x3a, 0x2b, 0xa0, 0xb5, 0xfa, 0x15,
+-      0xdd, 0xf8, 0x40, 0xf9, 0x7b, 0xbb, 0x18, 0xf9, 0xc4, 0xbe, 0xac, 0x97,
+-      0xc7, 0xd5, 0x62, 0x01, 0x6f, 0x59, 0xb6, 0x7a, 0x1c, 0xb3, 0x64, 0x2f,
+-      0xee, 0xaf, 0xf1, 0xc0, 0x09, 0x1f, 0x3a, 0x52, 0x3f, 0xb1, 0x33, 0x11,
+-      0x19, 0xf3, 0x13, 0xda, 0x42, 0xc6, 0x77, 0xfb, 0xd5, 0x2f, 0x17, 0xa0,
+-      0x6c, 0xb3, 0x84, 0x33, 0x8b, 0x5f, 0x4c, 0xc1, 0xb6, 0xa4, 0x87, 0x68,
+-      0xe3, 0x8e, 0xd4, 0x08, 0xde, 0x4f, 0xa5, 0xff, 0x63, 0x00, 0xda, 0x85,
+-      0x2b, 0x5e, 0xad, 0xd8, 0xec, 0x8d, 0x29, 0xc1, 0x46, 0x7d, 0xa8, 0xd1,
+-      0xdd, 0x9f, 0x67, 0xfd, 0x14, 0x0a, 0xec, 0x2a, 0x48, 0x9d, 0x39, 0x85,
+-      0x85, 0xc9, 0x0c, 0x7c, 0xe4, 0x77, 0xa3, 0x2d, 0x5a, 0xdf, 0x73, 0x8a,
+-      0x16, 0x3d, 0xa0, 0xc4, 0x94, 0x7b, 0xf5, 0x61, 0xbc, 0x60, 0x24, 0xd2,
+-      0xed, 0x4a, 0x7d, 0xa0, 0xb3, 0x50, 0x1e, 0xbb, 0x83, 0xb8, 0xa1, 0x15,
+-      0xaf, 0x78, 0x2b, 0x51, 0xb7, 0x5e, 0xef, 0xac, 0xf4, 0x6a, 0xc3, 0x5f,
+-      0x60, 0x1d, 0xb0, 0xa3, 0x50, 0x0c, 0x7e, 0x90, 0xf0, 0x60, 0x8d, 0xb3,
+-      0x87, 0x90, 0x2d, 0xf5, 0x47, 0xa7, 0xd0, 0x35, 0x69, 0x6f, 0xbe, 0x98,
+-      0xd2, 0xa2, 0xcf, 0x29, 0x99, 0x3d, 0x21, 0xf2, 0x9a, 0x07, 0xa1, 0xc7,
+-      0xe6, 0x19, 0xc7, 0x1d, 0x05, 0x0f, 0x56, 0x3a, 0x7e, 0x9c, 0xe5, 0x98,
+-      0x87, 0x51, 0x79, 0xc2, 0xde, 0xbc, 0xc7, 0xd0, 0x86, 0xaf, 0x78, 0x33,
+-      0xff, 0xb5, 0x8e, 0x76, 0xdb, 0xa6, 0x68, 0xac, 0x4f, 0x47, 0x70, 0x91,
+-      0x3a, 0x7c, 0x3d, 0xa5, 0x25, 0xff, 0x4c, 0xd1, 0x7a, 0xbe, 0x4c, 0x5f,
+-      0xf6, 0x9a, 0x61, 0xca, 0xa9, 0x25, 0x67, 0x21, 0xbd, 0xf3, 0x18, 0xae,
+-      0x18, 0x99, 0xe0, 0xf6, 0xc6, 0x24, 0xf9, 0x59, 0x94, 0xf9, 0x30, 0x86,
+-      0xa3, 0xe4, 0x77, 0x87, 0x0b, 0x15, 0x28, 0xaa, 0x3a, 0xf9, 0x59, 0x0f,
+-      0x3c, 0x93, 0x21, 0x65, 0x2e, 0x1b, 0x37, 0x3a, 0xf0, 0x47, 0x28, 0x3a,
+-      0x38, 0x77, 0x18, 0xa1, 0x13, 0x3f, 0xb0, 0x6b, 0x74, 0xbd, 0x75, 0x52,
+-      0xe1, 0xbc, 0xcf, 0x44, 0x69, 0x63, 0xbe, 0x27, 0xe7, 0x4e, 0xac, 0x6e,
+-      0xdc, 0x3b, 0x19, 0xe1, 0xfb, 0x35, 0x58, 0x7b, 0x22, 0x86, 0x0f, 0x53,
+-      0x37, 0xa3, 0xe8, 0x70, 0x04, 0x85, 0x7e, 0x40, 0x3f, 0x62, 0xad, 0x95,
+-      0x21, 0x8f, 0x94, 0x7d, 0xa3, 0xc3, 0x96, 0xd4, 0xe8, 0x3e, 0x7e, 0x0f,
+-      0xf1, 0x57, 0xec, 0xf9, 0x39, 0x72, 0x1d, 0xf9, 0x5c, 0xd3, 0x16, 0x9b,
+-      0xfb, 0x5e, 0x95, 0xb3, 0x7f, 0x89, 0x18, 0x9f, 0x53, 0x9d, 0xde, 0xe0,
+-      0x28, 0xc7, 0x3c, 0x3b, 0x25, 0xb5, 0x5b, 0xfb, 0xa6, 0x40, 0x69, 0x7f,
+-      0xfd, 0x87, 0x86, 0x07, 0x9b, 0x59, 0xdf, 0x47, 0x75, 0x39, 0x9b, 0x39,
+-      0xaa, 0xd5, 0x61, 0x13, 0x4e, 0xab, 0x2c, 0xc4, 0xf5, 0xff, 0x80, 0x09,
+-      0x35, 0x49, 0xac, 0xd1, 0xf1, 0x5e, 0xf6, 0x37, 0x58, 0xf3, 0xd4, 0xcb,
+-      0xd9, 0x1b, 0xac, 0x3c, 0xe1, 0xe7, 0x9c, 0x9b, 0xc9, 0x75, 0xb6, 0xe3,
+-      0xbb, 0xaa, 0x5b, 0x6f, 0x10, 0x8f, 0x30, 0x3e, 0x1b, 0x22, 0x1f, 0x0d,
+-      0xf0, 0xf7, 0x46, 0xd9, 0x7e, 0x9d, 0x4c, 0xa2, 0xcb, 0xbf, 0x25, 0x53,
+-      0x80, 0x7c, 0x80, 0x78, 0x99, 0x7d, 0x0d, 0x1f, 0x72, 0xec, 0xcc, 0xac,
+-      0x3b, 0xe6, 0xf1, 0x82, 0x8c, 0x2b, 0xf3, 0xc5, 0x99, 0x37, 0x65, 0xfc,
+-      0x90, 0x9c, 0xbf, 0xfd, 0x77, 0xce, 0x41, 0x86, 0x77, 0x82, 0x35, 0xb2,
+-      0xd1, 0x88, 0x0e, 0x95, 0xeb, 0x65, 0xc9, 0x1c, 0x1a, 0xeb, 0x51, 0x79,
+-      0x37, 0x8a, 0x35, 0x93, 0xf6, 0x48, 0xd4, 0x94, 0xeb, 0xb6, 0x5d, 0xbb,
+-      0x51, 0x8f, 0xbe, 0xad, 0xf8, 0x98, 0xf3, 0x7c, 0xb4, 0xc1, 0x38, 0xce,
+-      0x66, 0x9b, 0x2e, 0xbc, 0x4f, 0x0e, 0x15, 0x63, 0xbd, 0x77, 0xc9, 0x3b,
+-      0x8e, 0xb9, 0xec, 0xb1, 0x6a, 0xe9, 0x13, 0x30, 0x0f, 0x2a, 0xb3, 0xd9,
+-      0xfb, 0xab, 0x05, 0xab, 0xc6, 0xe8, 0x0b, 0xcd, 0x93, 0x22, 0xab, 0x3d,
+-      0x52, 0xc3, 0x71, 0x8e, 0x72, 0x9c, 0xd9, 0x0d, 0x7a, 0xdf, 0x98, 0x22,
+-      0x36, 0x0b, 0xe1, 0x58, 0xe1, 0xa2, 0xf4, 0xd0, 0x68, 0xb7, 0x69, 0x3e,
+-      0x2f, 0x76, 0x8b, 0xe0, 0xbb, 0xa5, 0x71, 0x9e, 0x2a, 0x5c, 0xc0, 0x6c,
+-      0xf6, 0x2d, 0xe7, 0xef, 0x31, 0xd6, 0x0d, 0xe3, 0xac, 0x21, 0xf3, 0xc4,
+-      0x93, 0xc9, 0x6c, 0x53, 0xdf, 0x24, 0xe5, 0x70, 0xcf, 0xca, 0x0d, 0xe0,
+-      0xd9, 0xd2, 0x33, 0xa3, 0x7c, 0x77, 0xf4, 0xda, 0xdf, 0x62, 0x23, 0x77,
+-      0x0f, 0xdf, 0xdd, 0x53, 0xa8, 0xe4, 0xda, 0xb9, 0xb5, 0xf8, 0x11, 0xcb,
+-      0x2f, 0x7d, 0x70, 0xbc, 0x36, 0xb5, 0x19, 0x63, 0xc6, 0x5f, 0x62, 0x2f,
+-      0xf5, 0x1e, 0xa7, 0x3d, 0x4f, 0x58, 0xce, 0x5e, 0xbd, 0x9c, 0xcb, 0x22,
+-      0x96, 0x87, 0xda, 0xce, 0x90, 0x93, 0x1d, 0x63, 0xcc, 0xdc, 0x97, 0x6a,
+-      0xea, 0x79, 0x9d, 0x7e, 0x97, 0xfe, 0xa2, 0xec, 0x87, 0x03, 0x93, 0xb9,
+-      0x47, 0x31, 0xb3, 0xa4, 0x69, 0xf1, 0x45, 0x62, 0xc2, 0x69, 0xe2, 0x94,
+-      0x8f, 0x98, 0x50, 0x9b, 0xf3, 0x94, 0xf6, 0x77, 0x0d, 0x7e, 0x6f, 0xba,
+-      0x30, 0x87, 0xbf, 0xa1, 0x5d, 0x44, 0xbe, 0x78, 0x72, 0x0e, 0xf2, 0xac,
+-      0xdb, 0x83, 0xd5, 0xe7, 0x06, 0x71, 0xe9, 0x66, 0xb7, 0x8f, 0xe6, 0x65,
+-      0xee, 0xde, 0x97, 0x6d, 0x52, 0xc7, 0x64, 0xec, 0x5e, 0x2d, 0x9a, 0xe1,
+-      0x5a, 0x4d, 0x38, 0x1c, 0x5c, 0x65, 0x8e, 0x97, 0x73, 0x58, 0x35, 0xf0,
+-      0xd1, 0xf7, 0xc7, 0x0c, 0x39, 0xbf, 0x10, 0x0d, 0xef, 0xe0, 0x1a, 0x8e,
+-      0x59, 0x4d, 0xad, 0x71, 0x65, 0x0f, 0xca, 0xfc, 0xdb, 0xe5, 0xd4, 0x5a,
+-      0xdf, 0x51, 0x34, 0xf5, 0x3c, 0x88, 0x2f, 0x21, 0xbd, 0xa4, 0xa9, 0x7f,
+-      0x0a, 0x71, 0xe3, 0x7e, 0xc8, 0x39, 0x4e, 0x77, 0xac, 0x86, 0x3c, 0x33,
+-      0xc9, 0xd2, 0x4f, 0xec, 0x15, 0xfa, 0x53, 0x98, 0x22, 0x77, 0x6c, 0x5c,
+-      0xa7, 0x5f, 0xf8, 0x5a, 0xe9, 0x9e, 0xbb, 0x4f, 0x24, 0xfe, 0x12, 0xa0,
+-      0x0d, 0x2a, 0xe1, 0x5b, 0x5a, 0xcf, 0x39, 0x68, 0x0b, 0xe7, 0x8c, 0xef,
+-      0x45, 0x1c, 0xa4, 0xbf, 0x4d, 0x15, 0x14, 0x18, 0x0d, 0x17, 0x31, 0x24,
+-      0xb9, 0x8b, 0xef, 0xb4, 0x67, 0x43, 0xe4, 0xb2, 0x51, 0x54, 0xea, 0xf1,
+-      0xd8, 0x28, 0xf5, 0x6b, 0x27, 0x96, 0x8f, 0x13, 0x43, 0x32, 0x6a, 0xc8,
+-      0x39, 0x77, 0x5a, 0xa9, 0x47, 0x9d, 0xff, 0x15, 0x90, 0x5a, 0xa8, 0x71,
+-      0x46, 0xf6, 0xa8, 0x0f, 0xe3, 0xe2, 0x54, 0x11, 0xc7, 0x52, 0x69, 0xec,
+-      0x5f, 0xa2, 0x62, 0xd2, 0x5a, 0xe6, 0xf4, 0x0e, 0xa4, 0xe6, 0xea, 0xca,
+-      0x1d, 0x72, 0xfa, 0x91, 0x5b, 0x53, 0x9e, 0x06, 0x39, 0xa7, 0x31, 0xcb,
+-      0xda, 0x6b, 0xca, 0x18, 0xc1, 0x41, 0xe3, 0xcb, 0x30, 0x96, 0x0a, 0x76,
+-      0x8e, 0xe1, 0xd5, 0x19, 0xc9, 0x71, 0xc9, 0xb6, 0x5b, 0x26, 0xc5, 0x3e,
+-      0x1e, 0x72, 0xdf, 0x00, 0x9a, 0x1d, 0x2e, 0xf7, 0x50, 0xdb, 0xea, 0x19,
+-      0x97, 0xd3, 0x35, 0xe7, 0xe5, 0xac, 0x74, 0x0d, 0xc2, 0xb4, 0xd7, 0xf9,
+-      0x94, 0x9f, 0x98, 0x23, 0xf6, 0x94, 0x33, 0x7a, 0xae, 0x9e, 0xc9, 0xbc,
+-      0x82, 0xb1, 0x96, 0x1b, 0xf7, 0x58, 0xe4, 0xff, 0x06, 0xae, 0x9d, 0x1b,
+-      0x2c, 0xf5, 0xc7, 0xff, 0xcc, 0xbe, 0x74, 0x93, 0xe8, 0xbd, 0x22, 0x44,
+-      0x4c, 0x8f, 0xcd, 0x5c, 0xb3, 0xaf, 0xd8, 0xf4, 0x9c, 0xe4, 0x0c, 0xc7,
+-      0xe6, 0x6e, 0xcf, 0x4d, 0x1b, 0xba, 0xac, 0x34, 0x31, 0x9f, 0xd0, 0xaf,
+-      0x96, 0xd0, 0xdf, 0x9a, 0xd1, 0xbf, 0xc2, 0xf4, 0xf5, 0x5e, 0xb5, 0x36,
+-      0xa3, 0x75, 0xfd, 0x7b, 0x36, 0x6e, 0x6e, 0x87, 0x57, 0x97, 0xeb, 0x33,
+-      0x76, 0x5a, 0x95, 0xbf, 0xff, 0x24, 0x24, 0xb9, 0xfe, 0x65, 0xab, 0x68,
+-      0xaf, 0x5e, 0xe6, 0x72, 0xc4, 0x1f, 0x64, 0x65, 0xdf, 0x2b, 0x63, 0xb3,
+-      0xde, 0xbe, 0xf0, 0xae, 0xf7, 0x10, 0xbe, 0x9f, 0x3f, 0x8c, 0x77, 0xa6,
+-      0x7c, 0x08, 0xeb, 0xa2, 0xcb, 0x66, 0xd4, 0xae, 0x4f, 0xa4, 0xdf, 0x23,
+-      0x2e, 0x5e, 0x98, 0x29, 0xfb, 0xc5, 0x43, 0x6d, 0x6b, 0x66, 0x14, 0x8e,
+-      0x55, 0x83, 0x0a, 0xea, 0xf9, 0x1d, 0xc3, 0x8b, 0x58, 0x89, 0xe3, 0x7a,
+-      0x29, 0xa7, 0x9c, 0x7b, 0x10, 0xee, 0x1b, 0xcf, 0x1f, 0x0a, 0xb9, 0x3d,
+-      0xb0, 0x10, 0x71, 0x74, 0x1c, 0x13, 0xd9, 0xa6, 0xe4, 0xfb, 0x72, 0x0e,
+-      0x87, 0x35, 0xd9, 0x25, 0x8c, 0xe3, 0x44, 0xb6, 0x8c, 0xa1, 0x51, 0x39,
+-      0x97, 0x9a, 0x8c, 0x79, 0x5c, 0x8c, 0x8c, 0x79, 0xb4, 0x4c, 0xcc, 0xe3,
+-      0x0f, 0x09, 0x77, 0x18, 0x2d, 0xc4, 0xa3, 0x95, 0xf0, 0xe2, 0x3e, 0xc3,
+-      0xf5, 0x8f, 0x86, 0x39, 0x3f, 0x62, 0x4b, 0x25, 0x2f, 0x4b, 0x4e, 0xf6,
+-      0x31, 0x27, 0x2f, 0x23, 0xbf, 0xf6, 0xe1, 0x4d, 0x5d, 0xec, 0xb1, 0xa6,
+-      0x6c, 0x0f, 0xe3, 0x1c, 0x1e, 0xb6, 0x8b, 0x3d, 0xe2, 0x4b, 0x7e, 0x1c,
+-      0x6e, 0x9e, 0xb5, 0x67, 0x22, 0xa2, 0xbb, 0x17, 0xa7, 0x89, 0xaf, 0xb8,
+-      0x39, 0x1e, 0x3d, 0xcd, 0x9c, 0x3d, 0xa6, 0x97, 0x7d, 0xfc, 0xb7, 0x4b,
+-      0x72, 0xea, 0x7d, 0xf3, 0xb8, 0x9f, 0x7f, 0x37, 0x44, 0xf7, 0x2b, 0xee,
+-      0x7c, 0xab, 0xe7, 0xfe, 0x26, 0x54, 0xee, 0x9f, 0xca, 0xb3, 0xb1, 0xfc,
+-      0xe3, 0xfc, 0x2e, 0x63, 0x85, 0xe8, 0x9f, 0x95, 0xe8, 0x8f, 0xc8, 0xff,
+-      0x89, 0x88, 0x5d, 0x64, 0x3f, 0x11, 0xb4, 0x87, 0x8d, 0xd7, 0x68, 0x8f,
+-      0xc3, 0xd7, 0xce, 0x4c, 0xb9, 0xf8, 0x55, 0xc5, 0xeb, 0x3b, 0x52, 0xaf,
+-      0x6c, 0x0a, 0xe2, 0x17, 0xf6, 0xa5, 0x48, 0x94, 0x98, 0x50, 0xe6, 0xa1,
+-      0x62, 0x33, 0xc3, 0xb1, 0x99, 0x5b, 0x2b, 0x5e, 0xd3, 0xa3, 0x38, 0x40,
+-      0xbe, 0xbd, 0x90, 0x2d, 0x9f, 0x15, 0x89, 0x13, 0x6b, 0x3e, 0x8f, 0xfe,
+-      0x3a, 0x19, 0xaf, 0x9e, 0xfe, 0x95, 0xa4, 0x0d, 0xd4, 0xf0, 0xce, 0x69,
+-      0xa9, 0xb5, 0xc9, 0x8f, 0x27, 0xe3, 0xc6, 0x43, 0xe4, 0x91, 0x13, 0x93,
+-      0xb6, 0xfd, 0x96, 0x81, 0x3b, 0xc3, 0xcc, 0xef, 0x2f, 0x90, 0x4f, 0x90,
+-      0x6f, 0xc4, 0x2a, 0x95, 0xa6, 0xe8, 0x2a, 0xe6, 0xfa, 0x31, 0xd6, 0x0a,
+-      0x4f, 0x13, 0xe3, 0x4e, 0x2f, 0x54, 0xc1, 0x3a, 0x21, 0xfb, 0x82, 0x55,
+-      0x98, 0x7c, 0x26, 0x49, 0xd9, 0x97, 0x72, 0x9c, 0x00, 0xaa, 0xcf, 0xb4,
+-      0xa2, 0xea, 0x94, 0x82, 0x1d, 0x89, 0x56, 0x04, 0xcf, 0xd4, 0x30, 0xff,
+-      0x06, 0x70, 0xa5, 0x85, 0x6b, 0xfc, 0x4c, 0x59, 0x0f, 0x67, 0x8f, 0x14,
+-      0x4f, 0xe6, 0x62, 0xe4, 0xf1, 0x11, 0x2c, 0x58, 0xb2, 0x1f, 0x1c, 0x70,
+-      0xb0, 0xf4, 0xc2, 0x86, 0x7a, 0x67, 0xcf, 0xea, 0xc5, 0x82, 0x1e, 0x3d,
+-      0xab, 0xd4, 0xe0, 0xc7, 0x27, 0x8a, 0x37, 0x57, 0xc2, 0x7e, 0x79, 0x85,
+-      0x99, 0xe8, 0xdb, 0x4b, 0xff, 0x5f, 0xb3, 0x3a, 0xc2, 0xfa, 0xc6, 0xb6,
+-      0xaf, 0x6e, 0x94, 0x3a, 0xd8, 0x70, 0xea, 0x60, 0x77, 0x6f, 0x5f, 0x1f,
+-      0x7c, 0x4c, 0xc9, 0x6c, 0x0f, 0xc3, 0xfe, 0xa8, 0xd2, 0xb4, 0x3f, 0xf6,
+-      0x9b, 0x09, 0xbe, 0x2f, 0x7b, 0x7c, 0xb6, 0xfd, 0xc3, 0x16, 0xdb, 0xce,
+-      0xb7, 0xc4, 0xfb, 0x54, 0xaf, 0x8a, 0x33, 0x8d, 0xb2, 0x2f, 0xe8, 0xc1,
+-      0x8f, 0x13, 0x7a, 0x74, 0x2f, 0x64, 0x0f, 0x9e, 0x78, 0xbf, 0x4c, 0xce,
+-      0x18, 0xd6, 0x87, 0x3b, 0xad, 0xa5, 0x78, 0x61, 0x7e, 0x23, 0xfa, 0xfd,
+-      0x70, 0xce, 0xc5, 0xd8, 0x06, 0xde, 0x5e, 0x01, 0xc9, 0xe1, 0x89, 0xd6,
+-      0xc7, 0x10, 0xc1, 0x7c, 0xe1, 0x30, 0x1e, 0x39, 0x21, 0xf5, 0xd7, 0xea,
+-      0xb6, 0xc0, 0x09, 0xfb, 0x07, 0x51, 0xb3, 0x48, 0x8c, 0xb4, 0xed, 0xaa,
+-      0x8d, 0x4d, 0x51, 0xa6, 0x26, 0xf2, 0x8d, 0x18, 0x79, 0xb3, 0x3e, 0xf8,
+-      0x63, 0x2c, 0xc1, 0xd9, 0xd9, 0xf4, 0xcd, 0xe4, 0xf2, 0x9d, 0xcf, 0x2a,
+-      0xc2, 0xdb, 0x23, 0x78, 0xbe, 0x20, 0x9c, 0x65, 0x6d, 0x5b, 0xd7, 0x89,
+-      0xe5, 0x78, 0x79, 0x3e, 0x82, 0xb3, 0x96, 0x4e, 0xce, 0x04, 0xa5, 0xda,
+-      0xb4, 0x6b, 0x6b, 0x29, 0x6b, 0xb5, 0xd7, 0x8b, 0xed, 0x29, 0xa9, 0x19,
+-      0xf5, 0xc1, 0x90, 0x82, 0xe5, 0x95, 0xd0, 0x17, 0x1f, 0x06, 0x86, 0x82,
+-      0x66, 0xe2, 0xc2, 0xb3, 0x4a, 0xa2, 0xef, 0x03, 0x6f, 0x04, 0xdf, 0x22,
+-      0x16, 0x7d, 0xbd, 0x20, 0x67, 0xa5, 0x88, 0x37, 0xb3, 0x31, 0xae, 0x5b,
+-      0x00, 0x9e, 0x86, 0x1a, 0x1c, 0x61, 0xec, 0xbc, 0x66, 0x54, 0x10, 0xaf,
+-      0xe4, 0xec, 0x94, 0x60, 0x7d, 0xbd, 0x9c, 0x19, 0xb1, 0x5f, 0xd4, 0xdd,
+-      0x7a, 0xdf, 0x98, 0xbb, 0xf1, 0x4c, 0xb1, 0x4a, 0x8c, 0x6f, 0xea, 0x89,
+-      0x2a, 0x6f, 0xd8, 0xe9, 0x2f, 0x2a, 0xd4, 0xb3, 0xb7, 0x06, 0x55, 0x8e,
+-      0xae, 0x18, 0xcd, 0x95, 0xf3, 0x4b, 0xad, 0xd4, 0x77, 0x3d, 0x99, 0x92,
+-      0x3f, 0x56, 0x33, 0xee, 0x8f, 0x32, 0x5f, 0x57, 0x9e, 0x90, 0xbc, 0x42,
+-      0xfe, 0xad, 0x6c, 0x26, 0x2f, 0x16, 0x0e, 0x11, 0xc0, 0x83, 0xaa, 0xf8,
+-      0x86, 0x4a, 0xfd, 0x36, 0xf9, 0xe4, 0x2c, 0xd4, 0x0b, 0x05, 0xc9, 0xeb,
+-      0x82, 0x0b, 0xe5, 0xf9, 0xa2, 0xa8, 0x9b, 0x94, 0x35, 0x52, 0xdb, 0x3e,
+-      0x9a, 0x0c, 0xc9, 0xd9, 0xf7, 0x11, 0x0f, 0xeb, 0xef, 0x00, 0xfd, 0xeb,
+-      0x9e, 0x16, 0x7d, 0x70, 0xb3, 0x57, 0x63, 0x0d, 0x1e, 0x67, 0x2d, 0xa1,
+-      0xb5, 0x4e, 0x28, 0x37, 0x8e, 0xf3, 0x6c, 0x8d, 0xc4, 0x4b, 0x86, 0x7a,
+-      0x3e, 0xe9, 0xe8, 0xb4, 0x86, 0x3a, 0x09, 0x5e, 0x27, 0x89, 0xd7, 0x35,
+-      0xb8, 0x32, 0x05, 0x9d, 0x11, 0x8c, 0x57, 0x0d, 0x02, 0x95, 0x9a, 0x48,
+-      0x77, 0x40, 0x62, 0x41, 0xeb, 0x17, 0x3e, 0x55, 0x4d, 0x7c, 0x9e, 0x9d,
+-      0x92, 0x7c, 0xa3, 0x08, 0x57, 0xc9, 0xd4, 0x9a, 0x43, 0xf8, 0x70, 0x03,
+-      0xf0, 0xc6, 0xa4, 0xbb, 0xef, 0xde, 0x27, 0x67, 0x6f, 0x2b, 0xdd, 0x33,
+-      0x0d, 0x8f, 0x39, 0x67, 0x15, 0x64, 0xfc, 0x43, 0x38, 0x93, 0x15, 0x7e,
+-      0x39, 0x44, 0x7e, 0x19, 0x1f, 0x26, 0xf7, 0x6c, 0x2d, 0x40, 0x62, 0xb2,
+-      0xc9, 0xf8, 0x88, 0xbe, 0xff, 0x2c, 0x79, 0xeb, 0x11, 0xb8, 0xfb, 0xee,
+-      0x8d, 0xa5, 0xb3, 0x08, 0xf1, 0x7c, 0xa7, 0xb2, 0xd3, 0x39, 0xcf, 0x64,
+-      0x30, 0xde, 0x3a, 0x94, 0x1d, 0xf3, 0xdb, 0x94, 0xae, 0xf9, 0x6e, 0x65,
+-      0x4f, 0x41, 0xea, 0xd8, 0xd5, 0x6d, 0x0f, 0x9e, 0xd8, 0xad, 0xec, 0x9c,
+-      0xed, 0x55, 0xc8, 0x6f, 0xd5, 0x80, 0xd9, 0xa7, 0x74, 0xcf, 0xbb, 0xfd,
+-      0xf4, 0x4e, 0xd6, 0x70, 0x3b, 0x2d, 0xf1, 0x07, 0xb5, 0xad, 0x6b, 0x52,
+-      0xfe, 0x17, 0x2b, 0x22, 0xff, 0xf7, 0xd0, 0xbf, 0x55, 0xb1, 0xed, 0x55,
+-      0xa9, 0xd7, 0x65, 0x3d, 0xec, 0xe7, 0x53, 0xcc, 0x93, 0x56, 0x0d, 0x06,
+-      0x58, 0x83, 0x8c, 0x1a, 0xb7, 0x94, 0xf6, 0xcf, 0x44, 0x27, 0x39, 0x2f,
+-      0x21, 0xfe, 0x8a, 0x4c, 0x25, 0x65, 0xf8, 0x07, 0xca, 0xbf, 0xbf, 0xa4,
+-      0x57, 0xb7, 0x9c, 0x27, 0xf0, 0x23, 0x23, 0x3a, 0xe4, 0xa9, 0xef, 0xb1,
+-      0xc9, 0xeb, 0x7a, 0xf9, 0x78, 0x6d, 0x9c, 0x5c, 0x75, 0xbf, 0xa2, 0x0d,
+-      0x3f, 0xe7, 0xea, 0x75, 0xe1, 0x8a, 0xa2, 0x15, 0x47, 0x21, 0xb8, 0xe0,
+-      0xea, 0xb5, 0xb6, 0xa4, 0xd7, 0x9a, 0x7c, 0xa7, 0x73, 0x4e, 0xab, 0x86,
+-      0x7a, 0x2d, 0x4c, 0x76, 0x28, 0x9d, 0xf3, 0xd2, 0xcb, 0x14, 0xdd, 0x44,
+-      0x8f, 0x13, 0x76, 0x95, 0xde, 0xad, 0xdc, 0xee, 0x9c, 0x2b, 0x93, 0xb3,
+-      0x5d, 0xb2, 0xdf, 0x5f, 0xd6, 0x4b, 0x72, 0xfa, 0xd2, 0xf0, 0xb6, 0x69,
+-      0x35, 0xbc, 0x75, 0xda, 0xb6, 0xbf, 0x6b, 0xfc, 0xb3, 0xa3, 0xcb, 0x59,
+-      0x43, 0x74, 0x91, 0x73, 0x23, 0x65, 0x7d, 0xbe, 0x50, 0xd2, 0x47, 0xd6,
+-      0xea, 0xfa, 0x3a, 0x95, 0xff, 0x87, 0xef, 0xdd, 0xac, 0x7b, 0xa6, 0xa4,
+-      0xac, 0x4f, 0xd8, 0x2c, 0x9f, 0x2f, 0x1b, 0xc2, 0x1b, 0xbc, 0xff, 0x93,
+-      0x6c, 0x59, 0x2f, 0x2f, 0xe6, 0x66, 0xc5, 0xfe, 0x43, 0xf2, 0x3f, 0x7c,
+-      0xc4, 0x91, 0xb8, 0x31, 0x46, 0x3f, 0x72, 0xf5, 0xd3, 0x86, 0x57, 0x7a,
+-      0x9b, 0x8a, 0x57, 0xa0, 0xf5, 0x2f, 0x2a, 0x89, 0x34, 0x6b, 0x70, 0x9c,
+-      0x2d, 0xfc, 0xea, 0xfa, 0x35, 0xe7, 0xab, 0x94, 0x6d, 0x39, 0x19, 0xfb,
+-      0x21, 0x8e, 0x2d, 0x67, 0x4a, 0x14, 0x3c, 0x37, 0x0b, 0xcc, 0x5a, 0x9c,
+-      0xd6, 0x1c, 0xc1, 0xd3, 0x86, 0x6d, 0x3f, 0xdb, 0xa2, 0xcb, 0x59, 0xa0,
+-      0xf3, 0x6e, 0xaf, 0x08, 0x46, 0x8d, 0x2e, 0x7b, 0x79, 0x72, 0x9e, 0xa4,
+-      0x97, 0x36, 0x10, 0xdd, 0xc5, 0x07, 0xca, 0x6b, 0x2f, 0xe7, 0xdc, 0x32,
+-      0xb4, 0x8f, 0xd8, 0xa6, 0x7c, 0xde, 0x4d, 0xfa, 0x30, 0x37, 0xda, 0x64,
+-      0x6d, 0xd8, 0x59, 0x5f, 0x43, 0xfc, 0x95, 0xe8, 0x43, 0x5f, 0x9d, 0x23,
+-      0x97, 0x18, 0x33, 0xfc, 0x0e, 0x6f, 0x3b, 0x42, 0xae, 0x32, 0xc1, 0xd8,
+-      0x79, 0xd2, 0xba, 0x80, 0x0b, 0xf9, 0xd7, 0xf0, 0xc6, 0xb5, 0xff, 0x67,
+-      0x13, 0x7f, 0xb9, 0xb8, 0xb1, 0xcb, 0x39, 0xd3, 0x74, 0xba, 0xf5, 0x96,
+-      0x84, 0xe0, 0x50, 0x77, 0xb3, 0x9c, 0x71, 0xaa, 0x34, 0xf3, 0x9b, 0x64,
+-      0xbf, 0xab, 0xc2, 0x34, 0x6f, 0x3d, 0xaf, 0x8b, 0x6d, 0xfe, 0x62, 0xfd,
+-      0x19, 0x5d, 0xf4, 0xfa, 0x9f, 0x6b, 0xc7, 0x9d, 0xff, 0xaf, 0xfc, 0xbb,
+-      0x5b, 0xf7, 0xe9, 0x12, 0x3b, 0x67, 0x5b, 0xda, 0x1d, 0x4c, 0x68, 0x35,
+-      0x57, 0x39, 0x36, 0x68, 0x31, 0x6f, 0x71, 0x3e, 0x0d, 0x33, 0xe9, 0x7c,
+-      0x9a, 0xa6, 0x6b, 0x9b, 0x6e, 0xb3, 0xc1, 0xf9, 0xec, 0x30, 0xdd, 0xf3,
+-      0xcf, 0x69, 0x53, 0x77, 0x3e, 0x7b, 0xcc, 0xb8, 0xf3, 0xd9, 0x69, 0xae,
+-      0xbc, 0x2e, 0x17, 0x7f, 0xfe, 0x1f, 0x9b, 0x97, 0x53, 0xd9, 0x78, 0x3a,
++      0xad, 0x7b, 0x0d, 0x70, 0x94, 0xf7, 0x79, 0xe7, 0xef, 0xbf, 0x1f, 0xd2,
++      0xae, 0xb4, 0x5a, 0xad, 0xf0, 0x82, 0x57, 0x89, 0x52, 0xf6, 0xf5, 0xbe,
++      0x2b, 0x2d, 0x96, 0x80, 0x77, 0x41, 0x04, 0x11, 0x6d, 0xcd, 0x56, 0x08,
++      0x21, 0x40, 0xd8, 0x32, 0x56, 0x92, 0x25, 0xc7, 0xd4, 0x2a, 0xc8, 0x20,
++      0xdb, 0x18, 0x8b, 0x86, 0xe6, 0xe4, 0xd6, 0xad, 0xd6, 0x92, 0xc0, 0x60,
++      0x56, 0xbc, 0x22, 0x82, 0x08, 0x77, 0xee, 0x26, 0xb2, 0x25, 0x2c, 0xec,
++      0xac, 0x58, 0x3b, 0xbd, 0xeb, 0xc5, 0x33, 0xc9, 0x58, 0x67, 0x6c, 0x4c,
++      0x72, 0xfe, 0xc8, 0x75, 0x3a, 0x3d, 0xf7, 0xe6, 0xee, 0xca, 0xf8, 0x83,
++      0xd8, 0x6e, 0x8c, 0xdd, 0x4c, 0x3a, 0x27, 0x52, 0xdb, 0xef, 0xfd, 0x9e,
++      0xf7, 0xdd, 0x05, 0xe2, 0xba, 0xd3, 0x99, 0xce, 0x69, 0x66, 0x67, 0xa5,
++      0xf7, 0xe3, 0xf9, 0x3f, 0xdf, 0xcf, 0xef, 0x79, 0xfe, 0x7f, 0xd5, 0x03,
++      0x15, 0x28, 0xfe, 0x54, 0xf1, 0xd3, 0x3c, 0x30, 0x78, 0x70, 0xd5, 0x8a,
++      0xe6, 0x15, 0xf6, 0x05, 0x97, 0xc7, 0x23, 0x37, 0xbf, 0xaa, 0x80, 0xde,
++      0x0f, 0xf0, 0x6f, 0xfa, 0xf9, 0xca, 0xbf, 0xed, 0x35, 0xfb, 0xc7, 0x0d,
++      0x84, 0x4a, 0x7c, 0xc9, 0x07, 0x3e, 0x57, 0xea, 0xd2, 0xd7, 0xda, 0x74,
++      0xf8, 0xdc, 0xa9, 0x93, 0xa9, 0xdd, 0x3a, 0x90, 0xce, 0x37, 0x46, 0x37,
++      0xe0, 0x53, 0x2b, 0x1b, 0xf6, 0x40, 0xae, 0x7f, 0x25, 0xf5, 0xc9, 0xd0,
++      0x4f, 0xd6, 0x6a, 0x1f, 0x4f, 0xb9, 0xe1, 0x0b, 0xa5, 0x4e, 0x23, 0x54,
++      0x0f, 0x5f, 0x1d, 0xdf, 0xf9, 0x0f, 0x0d, 0xd5, 0x6e, 0x04, 0x4b, 0xb4,
++      0x5a, 0x30, 0x62, 0x22, 0xeb, 0x4b, 0x0d, 0xa0, 0x7c, 0x0d, 0xf0, 0x6e,
++      0x2e, 0x6e, 0x8c, 0x00, 0xe3, 0xae, 0x54, 0x3c, 0xfa, 0x22, 0x0c, 0x1c,
++      0x2a, 0x44, 0xd1, 0xce, 0xcf, 0x66, 0xf3, 0x33, 0x2b, 0xea, 0x45, 0xd6,
++      0xcd, 0xe7, 0x76, 0x35, 0x03, 0x1b, 0x73, 0x06, 0x0e, 0x9b, 0xf0, 0xd5,
++      0xa6, 0x1e, 0xc6, 0x3a, 0x7e, 0x07, 0x53, 0x83, 0x78, 0x7d, 0x2c, 0x16,
++      0x7d, 0x0a, 0x5a, 0x46, 0x77, 0x6b, 0x83, 0x40, 0x63, 0x7f, 0x9f, 0xd2,
++      0x7a, 0xdf, 0x50, 0x5a, 0xf7, 0x98, 0x82, 0x4f, 0xf1, 0xb9, 0xc6, 0xbc,
++      0x7c, 0x0f, 0xe2, 0xd6, 0xbc, 0x0f, 0x97, 0xdc, 0xb2, 0xfe, 0xef, 0x52,
++      0xdf, 0x0a, 0x1e, 0xbd, 0x05, 0xa3, 0xe4, 0xc1, 0x9b, 0x52, 0x78, 0xb2,
++      0x39, 0x1e, 0x19, 0x86, 0xdc, 0x8f, 0x62, 0x43, 0x41, 0xbe, 0x35, 0x4a,
++      0x6d, 0x59, 0xa3, 0x86, 0x65, 0x9d, 0x31, 0xca, 0x91, 0x0d, 0x69, 0x11,
++      0x40, 0x61, 0xd8, 0x70, 0x21, 0x1d, 0x6a, 0x8b, 0x7a, 0xa0, 0x45, 0xee,
++      0xc1, 0x3f, 0x51, 0xe6, 0x74, 0xc2, 0x0b, 0xe7, 0xf9, 0x5e, 0x94, 0x63,
++      0x3e, 0xe4, 0x68, 0xed, 0xc9, 0x9c, 0x65, 0x5d, 0xd0, 0x3d, 0x38, 0x43,
++      0xfd, 0x0c, 0xe7, 0xff, 0xc9, 0x9a, 0xa7, 0x6e, 0x46, 0xf5, 0xd2, 0xfa,
++      0x3e, 0x4c, 0x85, 0x2c, 0x6b, 0x9a, 0xf7, 0x0e, 0xe7, 0x4b, 0x7a, 0xb6,
++      0x2c, 0x97, 0x6e, 0x59, 0xbb, 0xf5, 0xdf, 0x58, 0xbb, 0x7e, 0xeb, 0x59,
++      0xcb, 0x7a, 0xcc, 0xb8, 0x09, 0x67, 0x27, 0xda, 0xd5, 0x96, 0xd9, 0x25,
++      0xc1, 0xcd, 0x93, 0x16, 0x2e, 0x18, 0x08, 0xb9, 0x52, 0x1d, 0x6a, 0xf3,
++      0x6c, 0xa7, 0xda, 0x58, 0xd8, 0xae, 0x3a, 0xa6, 0xbf, 0xa5, 0x3a, 0x67,
++      0x7b, 0xd5, 0xa6, 0x42, 0x04, 0x33, 0x66, 0x18, 0xd3, 0x66, 0x46, 0xb5,
++      0xcf, 0xf6, 0x28, 0x47, 0x8e, 0x41, 0xd5, 0x56, 0x28, 0xd1, 0xba, 0xae,
++      0xc7, 0xcd, 0xb9, 0x14, 0x8e, 0x98, 0xe5, 0x5c, 0x67, 0xc1, 0xfa, 0x49,
++      0xc3, 0x02, 0xe5, 0x34, 0x70, 0xb4, 0xf0, 0x18, 0xb6, 0x4d, 0x5a, 0x56,
++      0x3e, 0x09, 0xe4, 0x0b, 0xc0, 0x0f, 0xcc, 0x58, 0x77, 0xbf, 0xb2, 0xac,
++      0x4d, 0x71, 0x6b, 0xe9, 0x65, 0xa3, 0x31, 0xf1, 0x12, 0xfe, 0xaf, 0x35,
++      0x15, 0x46, 0x36, 0x40, 0x1a, 0xc7, 0x68, 0xb3, 0xfb, 0xc6, 0xe0, 0x2b,
++      0x4f, 0x8d, 0xe2, 0x17, 0x39, 0xf8, 0xca, 0x52, 0x59, 0x5c, 0xc8, 0x0d,
++      0x87, 0x7c, 0x88, 0x45, 0x36, 0xab, 0xec, 0xa0, 0x0b, 0xda, 0xc0, 0xdb,
++      0xd0, 0xa2, 0xb4, 0xc7, 0xc5, 0xf3, 0x4a, 0x9b, 0x7f, 0x09, 0x5a, 0xfa,
++      0x37, 0x4a, 0xeb, 0xac, 0x75, 0x23, 0xed, 0x8a, 0xfb, 0xf0, 0x93, 0x06,
++      0xb1, 0xc9, 0x28, 0x56, 0xd8, 0xb6, 0xc9, 0x62, 0xd9, 0x35, 0xdb, 0xa4,
++      0x30, 0x4c, 0xbe, 0x0e, 0x93, 0xaf, 0x97, 0x0d, 0x2d, 0xf2, 0x24, 0xac,
++      0xa5, 0x7d, 0x86, 0xdc, 0x4b, 0x61, 0xb4, 0x60, 0x45, 0x83, 0xa9, 0x4b,
++      0xe4, 0x17, 0xd9, 0x2f, 0xa5, 0x7c, 0xd9, 0xea, 0xd4, 0xa7, 0xd6, 0x6b,
++      0x6b, 0x22, 0x78, 0xa1, 0x10, 0xc6, 0x73, 0x85, 0x10, 0x9e, 0x2d, 0xb4,
++      0xc3, 0x2c, 0x20, 0xb8, 0xad, 0xf0, 0x45, 0x7e, 0x6c, 0x21, 0xc0, 0xe7,
++      0xc9, 0x77, 0x70, 0x6b, 0xc1, 0xd3, 0x5b, 0x96, 0x42, 0xf7, 0x4f, 0x73,
++      0x43, 0x56, 0x85, 0x8e, 0xde, 0x9a, 0x94, 0x9e, 0xbe, 0x55, 0x05, 0x5a,
++      0xe8, 0x87, 0xdd, 0xaf, 0xe4, 0x5b, 0x3c, 0xfa, 0x71, 0x3f, 0xbc, 0xd4,
++      0xff, 0xc6, 0x82, 0x65, 0x8d, 0x18, 0x07, 0x56, 0xee, 0x6a, 0xf9, 0x8b,
++      0xf9, 0x6e, 0xbd, 0x0b, 0xd9, 0x42, 0x1f, 0x10, 0x4c, 0xf1, 0x9b, 0xa1,
++      0xb8, 0xbd, 0xa9, 0x3d, 0x7a, 0xee, 0x01, 0x8f, 0xe3, 0xcf, 0xe4, 0x81,
++      0x7a, 0x7f, 0xce, 0x24, 0x0f, 0xe6, 0xe1, 0x20, 0x2a, 0xa2, 0x94, 0xef,
++      0xe7, 0xe4, 0x33, 0x81, 0x1f, 0x16, 0x74, 0xf2, 0xd6, 0x44, 0x1e, 0xa3,
++      0xe4, 0xcf, 0x87, 0x5d, 0x13, 0xda, 0x78, 0x16, 0xda, 0x91, 0x29, 0x2c,
++      0x47, 0x3a, 0x1c, 0xa2, 0x0f, 0xfe, 0x39, 0x1c, 0x1a, 0x5d, 0x38, 0x6e,
++      0x62, 0x55, 0x28, 0x45, 0xfb, 0x26, 0xf1, 0x70, 0x19, 0xe2, 0xbd, 0x1f,
++      0x2b, 0x85, 0xd7, 0xe2, 0x5d, 0x18, 0xa3, 0x3c, 0x5d, 0x79, 0x3f, 0xee,
++      0x9f, 0xa8, 0xc0, 0xbd, 0x13, 0x16, 0xee, 0x4b, 0x22, 0x55, 0x41, 0x79,
++      0x12, 0xc9, 0x78, 0xf4, 0x3d, 0x78, 0xd0, 0x9e, 0xef, 0x62, 0x2c, 0x6d,
++      0x40, 0xba, 0xcc, 0x87, 0x0d, 0xf9, 0x00, 0xe3, 0x31, 0x8d, 0xd3, 0x93,
++      0x3e, 0x78, 0x57, 0xbb, 0x30, 0x15, 0x2e, 0x43, 0xa2, 0xde, 0xc5, 0x4f,
++      0x38, 0xd8, 0x36, 0x59, 0x17, 0xdc, 0x68, 0x7a, 0xb0, 0xd7, 0x74, 0x61,
++      0x68, 0xc2, 0xb2, 0xda, 0x0d, 0x0b, 0x57, 0x57, 0x87, 0xf0, 0x3c, 0xf5,
++      0x77, 0xc0, 0x8c, 0xe0, 0x6c, 0xe1, 0x51, 0xf2, 0x12, 0x76, 0xf8, 0x35,
++      0xc9, 0xbb, 0x49, 0xde, 0x4d, 0xf2, 0x6d, 0x0a, 0x9f, 0xe7, 0x19, 0x33,
++      0x06, 0xe5, 0xf2, 0x93, 0x87, 0x4a, 0xf4, 0x93, 0x8f, 0x58, 0xd2, 0x82,
++      0x2b, 0xa9, 0x65, 0x77, 0x31, 0x79, 0x2d, 0xad, 0xb7, 0xac, 0x8f, 0x57,
++      0x8b, 0x2c, 0xb4, 0xb9, 0xab, 0x4b, 0x62, 0xf4, 0xf7, 0xaa, 0x18, 0x57,
++      0x7f, 0x4b, 0xbd, 0x3d, 0x5e, 0xf0, 0x63, 0x70, 0xc2, 0xf6, 0xdb, 0x83,
++      0x65, 0xe4, 0x5b, 0xf8, 0x2a, 0xe8, 0x71, 0xc6, 0x68, 0x3c, 0xc3, 0x18,
++      0xc5, 0x56, 0xf2, 0x7c, 0x9f, 0x19, 0x6f, 0xd9, 0xae, 0x3c, 0xd8, 0x94,
++      0x0f, 0x07, 0xdb, 0x6f, 0xe0, 0x93, 0xf2, 0x4a, 0x0c, 0x52, 0xd6, 0x10,
++      0xf9, 0x0b, 0x63, 0x37, 0xf9, 0x7c, 0xae, 0xc8, 0xe7, 0x74, 0x41, 0xd6,
++      0xfa, 0x3c, 0xaf, 0x25, 0x3e, 0x91, 0x5d, 0x94, 0x0a, 0x2b, 0x54, 0x04,
++      0xb0, 0x3d, 0xff, 0x26, 0x6d, 0x51, 0x87, 0xbf, 0xa0, 0x0d, 0x5e, 0x60,
++      0x8c, 0xfc, 0xf0, 0x9a, 0xbf, 0x88, 0x3d, 0x1e, 0xa1, 0x1d, 0xb4, 0xd3,
++      0x59, 0x04, 0xd0, 0x5b, 0x48, 0xe3, 0xd0, 0x24, 0xd2, 0x33, 0xc6, 0x31,
++      0xc6, 0xfb, 0x12, 0xb8, 0xf5, 0xf2, 0x74, 0x48, 0xaf, 0xc0, 0xee, 0xe9,
++      0x30, 0x06, 0x0a, 0x6d, 0x30, 0x27, 0xc2, 0xd8, 0x47, 0xdf, 0xbc, 0x92,
++      0x4c, 0xdf, 0x17, 0x84, 0xf0, 0x1e, 0xc6, 0xfd, 0x7c, 0xe7, 0xb1, 0xc9,
++      0x30, 0xfa, 0xa9, 0xa3, 0xcd, 0xc9, 0x78, 0x8b, 0x9f, 0xd7, 0xf6, 0xf2,
++      0xda, 0x61, 0xea, 0xff, 0xbc, 0x31, 0x86, 0xde, 0x6e, 0x2d, 0x01, 0x84,
++      0xb1, 0xc7, 0x44, 0x88, 0x2e, 0xfc, 0x08, 0xf3, 0x5b, 0xe2, 0x3c, 0xff,
++      0xbe, 0xa7, 0x50, 0x41, 0x39, 0x83, 0x88, 0xe8, 0x9f, 0x58, 0xde, 0x66,
++      0xcb, 0xfa, 0xbe, 0x11, 0xbf, 0xf8, 0x96, 0xdb, 0x83, 0x87, 0x0a, 0x2e,
++      0x0c, 0x4e, 0x57, 0xe0, 0x0f, 0x27, 0x3c, 0xb8, 0xb3, 0xbe, 0x02, 0x07,
++      0xa6, 0xd3, 0x18, 0x99, 0xac, 0x40, 0xdf, 0x04, 0x96, 0xee, 0x31, 0x46,
++      0x6a, 0xca, 0xa0, 0x2d, 0xb4, 0x23, 0x81, 0xab, 0xb4, 0xc3, 0x43, 0xd3,
++      0x81, 0x60, 0x66, 0x32, 0x84, 0xc1, 0x59, 0x3f, 0x9f, 0x77, 0xf1, 0xf9,
++      0x72, 0x18, 0xab, 0x62, 0x83, 0x21, 0x08, 0x8f, 0x95, 0xd8, 0x3f, 0xed,
++      0xc7, 0x03, 0x13, 0x21, 0xec, 0x9b, 0x6c, 0xc6, 0xb8, 0x99, 0xc6, 0x51,
++      0xe6, 0x8e, 0x1f, 0x24, 0xb5, 0xee, 0x7d, 0x4a, 0x4b, 0x6f, 0x54, 0x69,
++      0x34, 0x24, 0xbd, 0xb8, 0xc4, 0x3c, 0xe4, 0x4d, 0x36, 0xb6, 0x3c, 0xcb,
++      0xdc, 0x50, 0x96, 0x0a, 0xf3, 0x6f, 0xed, 0x08, 0x63, 0x36, 0xed, 0x75,
++      0xad, 0x06, 0x16, 0x4b, 0xfc, 0x86, 0x83, 0x5b, 0xcc, 0x50, 0x70, 0x4b,
++      0xa1, 0x2e, 0xb8, 0xd9, 0x8c, 0x04, 0x37, 0x33, 0xbe, 0x36, 0x8a, 0x3f,
++      0x9a, 0x3e, 0x1c, 0x4b, 0x7e, 0x6a, 0xf5, 0xd6, 0xd8, 0xf9, 0x2c, 0xb8,
++      0x6d, 0x52, 0xcb, 0x4e, 0x41, 0x33, 0x58, 0x0d, 0x30, 0x36, 0xeb, 0xa1,
++      0xfd, 0x14, 0x6a, 0xf4, 0x66, 0xe6, 0xf1, 0x10, 0xf6, 0x33, 0xa7, 0xfc,
++      0x15, 0x73, 0x4a, 0xdf, 0xf1, 0x58, 0x68, 0x1c, 0x7e, 0xea, 0x1b, 0xd8,
++      0x75, 0x2e, 0x4c, 0x9b, 0x77, 0xe2, 0x51, 0xf2, 0xb5, 0x79, 0x4d, 0x18,
++      0xf7, 0x16, 0x42, 0xc1, 0x4e, 0xda, 0xef, 0xbd, 0x7c, 0x24, 0xb8, 0x81,
++      0xb6, 0x7c, 0x3b, 0xaf, 0x45, 0xe7, 0xf1, 0x8f, 0xe2, 0x4f, 0x09, 0xb8,
++      0x80, 0x3d, 0xc7, 0xbd, 0x98, 0x0f, 0xcb, 0x5a, 0xd4, 0xb9, 0xf9, 0x82,
++      0x15, 0xd0, 0xf5, 0xd3, 0xfb, 0xa8, 0xeb, 0x6f, 0x17, 0x02, 0x78, 0xc0,
++      0xd4, 0x12, 0x3f, 0x54, 0x01, 0xea, 0xd4, 0x47, 0x3d, 0x30, 0xc1, 0x2c,
++      0x91, 0xe7, 0x92, 0x88, 0x2e, 0x71, 0x72, 0xed, 0x81, 0x69, 0xf1, 0x13,
++      0xda, 0xde, 0xa4, 0x0f, 0xd0, 0x7f, 0x7e, 0x78, 0x2d, 0x56, 0xb5, 0x50,
++      0xd6, 0xce, 0xdd, 0x09, 0xfa, 0x8b, 0xa3, 0xa3, 0x13, 0x93, 0xa2, 0x07,
++      0x6d, 0x1c, 0xae, 0x34, 0x56, 0xae, 0xfa, 0x2b, 0xeb, 0xd2, 0x62, 0xd1,
++      0x47, 0x08, 0x43, 0xd4, 0xe1, 0x69, 0xd3, 0xb2, 0xae, 0xae, 0xfe, 0xd0,
++      0x6a, 0xb9, 0x59, 0xf4, 0x22, 0xb2, 0x3e, 0xaf, 0xa4, 0x8e, 0xd4, 0xe8,
++      0xc1, 0xff, 0x0f, 0xbe, 0xf2, 0x1d, 0xab, 0xd7, 0x96, 0x4f, 0xfc, 0xc5,
++      0x43, 0x5f, 0x7c, 0x94, 0xb4, 0x5d, 0xe8, 0x25, 0xbd, 0x07, 0x4d, 0xeb,
++      0xa3, 0xda, 0xd4, 0x67, 0x56, 0xcb, 0x5a, 0x7d, 0x60, 0x41, 0xfd, 0x0f,
++      0x5e, 0x0f, 0x63, 0x7f, 0xa1, 0x85, 0xba, 0x6b, 0xc7, 0x63, 0xd4, 0xe1,
++      0x61, 0x53, 0x72, 0x62, 0x84, 0xfe, 0x5c, 0x47, 0xff, 0xf6, 0xa8, 0x8d,
++      0x66, 0x1e, 0x9b, 0xc7, 0xb2, 0xd8, 0x44, 0x7f, 0xbf, 0x98, 0x8b, 0xb5,
++      0x3c, 0x0d, 0x2d, 0x4b, 0x19, 0x82, 0x9d, 0xd4, 0x71, 0xbb, 0xa9, 0x75,
++      0x8a, 0x4d, 0xdb, 0x99, 0x97, 0x5e, 0xcc, 0x45, 0x82, 0x6d, 0x05, 0xd1,
++      0x77, 0x5d, 0x70, 0x43, 0xe1, 0xab, 0xb4, 0xbd, 0xc2, 0xba, 0xe5, 0x3e,
++      0xe6, 0x99, 0x3b, 0xe1, 0xd8, 0xd5, 0xb1, 0xdd, 0x6b, 0xc9, 0xc6, 0xde,
++      0x0f, 0x99, 0x9f, 0xb2, 0x8b, 0x9d, 0x6b, 0x83, 0xbc, 0x56, 0xbd, 0x1a,
++      0xc1, 0x3b, 0xe8, 0x07, 0x77, 0xd3, 0x0f, 0xae, 0xae, 0xfe, 0xd4, 0x8a,
++      0xde, 0xe4, 0xf8, 0x41, 0xdb, 0xa4, 0x27, 0xd8, 0x41, 0x3d, 0x6d, 0x34,
++      0x14, 0xa6, 0x8d, 0x1c, 0x7a, 0xaf, 0x61, 0x87, 0xf4, 0xd4, 0x59, 0x23,
++      0xcd, 0x3c, 0xf2, 0xbb, 0xf0, 0xd4, 0x60, 0xea, 0x69, 0xe3, 0x51, 0x44,
++      0x1d, 0xdf, 0xc1, 0xbe, 0x09, 0x3f, 0xb2, 0x77, 0x86, 0x30, 0xd3, 0x10,
++      0xc2, 0x83, 0xa4, 0x7d, 0x25, 0xd9, 0xd8, 0xff, 0x3a, 0x75, 0x30, 0x55,
++      0x23, 0xd7, 0xd2, 0xf8, 0x91, 0xf1, 0x30, 0x70, 0x93, 0xb3, 0xf6, 0xac,
++      0xc4, 0xe8, 0x6c, 0x33, 0x0e, 0x17, 0x32, 0xca, 0xc9, 0x9b, 0x5a, 0x67,
++      0x1a, 0x3f, 0xb7, 0x24, 0x97, 0xce, 0x9a, 0xcc, 0x71, 0xd4, 0xc7, 0x28,
++      0xfd, 0x68, 0x38, 0x5f, 0x17, 0xdc, 0x44, 0x3f, 0x7a, 0x34, 0x2f, 0x32,
++      0xc5, 0x0d, 0xc3, 0x5d, 0xcb, 0xda, 0x4c, 0xfd, 0x98, 0x76, 0xcd, 0xaf,
++      0x0e, 0xe9, 0x47, 0x31, 0x6e, 0xf3, 0x36, 0xa8, 0x32, 0xc4, 0x18, 0x0c,
++      0x99, 0xea, 0x72, 0xfd, 0x00, 0x1e, 0xb5, 0xaf, 0x85, 0x83, 0x3b, 0x26,
++      0xd3, 0x2e, 0x97, 0x8e, 0x50, 0x65, 0xaa, 0x5d, 0xed, 0x60, 0xdd, 0xed,
++      0x98, 0xec, 0x50, 0x1d, 0xb3, 0x12, 0x03, 0x9d, 0x6a, 0x33, 0x6b, 0x6e,
++      0x9a, 0x35, 0x37, 0xcd, 0x9a, 0x9b, 0x26, 0x1f, 0x69, 0xd6, 0xda, 0xb6,
++      0xc2, 0xa0, 0xda, 0x2a, 0xfa, 0xa7, 0x7f, 0x3d, 0x6b, 0x3a, 0x38, 0x82,
++      0x39, 0x28, 0xb8, 0xa9, 0xb0, 0xc2, 0xe5, 0x60, 0xbb, 0x41, 0x55, 0xc4,
++      0x32, 0xbe, 0x0a, 0x9d, 0xb5, 0xcc, 0x1c, 0x54, 0x5b, 0x58, 0x6f, 0x33,
++      0xb6, 0x2e, 0x63, 0x03, 0xef, 0xb0, 0xce, 0xbe, 0xc6, 0x3a, 0x9b, 0x4f,
++      0x32, 0xae, 0x96, 0x5f, 0xb5, 0x7a, 0x17, 0x3b, 0x35, 0x61, 0x84, 0xfc,
++      0x7e, 0x9f, 0x36, 0x9b, 0x67, 0x2d, 0x6d, 0x77, 0x2b, 0xec, 0xd1, 0x51,
++      0x5d, 0xcb, 0x9c, 0x7a, 0xb8, 0xc0, 0x3a, 0x60, 0xc4, 0x5a, 0xde, 0xa7,
++      0x62, 0x0f, 0xeb, 0x5e, 0x5c, 0xbd, 0x89, 0x60, 0x47, 0x6f, 0xc3, 0xb1,
++      0x89, 0x72, 0xf4, 0x27, 0xd3, 0x8b, 0x7c, 0xc4, 0x2a, 0x9d, 0xcd, 0x78,
++      0x98, 0x4b, 0xab, 0x48, 0x2a, 0x4e, 0xbf, 0x41, 0xfa, 0x38, 0xeb, 0xc4,
++      0x98, 0xf9, 0x55, 0xe4, 0x59, 0x4f, 0x67, 0x0c, 0x0f, 0x5e, 0xcb, 0xaf,
++      0x60, 0x9e, 0x8b, 0x1b, 0x01, 0x55, 0xc1, 0xf8, 0x4d, 0x21, 0x67, 0x4a,
++      0x7e, 0xb2, 0xac, 0x19, 0xe1, 0x21, 0x1e, 0x4f, 0x0f, 0x43, 0x72, 0x96,
++      0xb5, 0xf4, 0x9e, 0x64, 0x19, 0xd6, 0xc5, 0x83, 0x58, 0xaa, 0xf7, 0xaa,
++      0xce, 0x42, 0xdc, 0x38, 0x8f, 0x6f, 0xa9, 0xbb, 0x67, 0x53, 0x8c, 0xed,
++      0x0c, 0x75, 0x53, 0x81, 0x4b, 0x61, 0xe1, 0x11, 0xd5, 0x5e, 0xdd, 0x85,
++      0x77, 0xef, 0x52, 0x08, 0xe9, 0x69, 0x5c, 0x68, 0x0e, 0xd1, 0xaf, 0x3a,
++      0x89, 0x31, 0xa2, 0x70, 0xcf, 0x45, 0x82, 0x5b, 0x69, 0x8b, 0xca, 0xb9,
++      0x3a, 0xda, 0x87, 0xbe, 0x47, 0x1d, 0xb6, 0x51, 0x87, 0x5b, 0xa6, 0x11,
++      0xaa, 0x48, 0xf5, 0xa8, 0x8e, 0x42, 0xbb, 0x6a, 0x2f, 0x68, 0xd4, 0x93,
++      0xe8, 0xe4, 0x3b, 0xc4, 0x4a, 0xe2, 0x2b, 0x25, 0x5b, 0x8a, 0xbf, 0xde,
++      0x68, 0xcf, 0x8c, 0x4b, 0x62, 0x6e, 0xdd, 0xf2, 0x14, 0xe3, 0xd1, 0x45,
++      0xbe, 0x84, 0x07, 0x1f, 0xaa, 0x1b, 0xac, 0xa5, 0x57, 0x92, 0x4c, 0x9e,
++      0x15, 0x29, 0x1c, 0x2f, 0x74, 0xd1, 0x2e, 0xab, 0x8b, 0xfe, 0x15, 0x0a,
++      0x6e, 0x9c, 0x6c, 0x57, 0x1b, 0x67, 0x17, 0x05, 0xbb, 0x69, 0xc3, 0xee,
++      0xd9, 0x88, 0xd0, 0xe5, 0xfa, 0x62, 0xdb, 0x34, 0x5c, 0xfa, 0xbf, 0x64,
++      0xcb, 0x6f, 0x93, 0x96, 0xd8, 0xd3, 0x5f, 0xf2, 0xd3, 0xe0, 0xdd, 0x93,
++      0x69, 0xbc, 0xbb, 0xda, 0xcb, 0x9a, 0x5a, 0xc2, 0x14, 0x55, 0xc5, 0xef,
++      0xd3, 0x2e, 0xe8, 0x83, 0xaa, 0x53, 0xfc, 0xc8, 0xeb, 0xac, 0x79, 0xc7,
++      0x24, 0xbc, 0x84, 0x0a, 0x51, 0x37, 0x31, 0xdd, 0x87, 0xc9, 0x78, 0xef,
++      0x39, 0xd5, 0xa5, 0xba, 0x0a, 0x52, 0x83, 0x1d, 0x9f, 0x6a, 0xa3, 0x4f,
++      0xb5, 0x93, 0x9f, 0x76, 0xfa, 0xd4, 0x16, 0xf2, 0xb3, 0xc5, 0xf6, 0x29,
++      0xf1, 0xcd, 0xdf, 0xe6, 0x65, 0x43, 0xe1, 0x6e, 0x5b, 0x2f, 0x5b, 0xf9,
++      0x6e, 0x27, 0xe5, 0xe8, 0xe4, 0x7b, 0x77, 0xf3, 0xbd, 0xbb, 0x67, 0xff,
++      0x97, 0xf0, 0x47, 0x59, 0x9c, 0xd8, 0xbf, 0x5e, 0xd3, 0x24, 0x07, 0xfc,
++      0xac, 0x88, 0x29, 0x90, 0x75, 0xa5, 0x24, 0x47, 0x0c, 0xa0, 0xbb, 0x19,
++      0xbe, 0x45, 0xa9, 0x67, 0x5b, 0xb7, 0xd7, 0x33, 0x9f, 0x31, 0x9f, 0xfa,
++      0x8e, 0x13, 0x4b, 0x33, 0x47, 0xcf, 0xb4, 0x28, 0x8c, 0x18, 0x37, 0x33,
++      0x4e, 0x0d, 0x1c, 0x29, 0x68, 0x9d, 0x51, 0xde, 0x6b, 0x1a, 0x13, 0x8c,
++      0xbf, 0x0f, 0x6d, 0xc4, 0x75, 0x91, 0x54, 0x3f, 0x22, 0x66, 0x2c, 0x72,
++      0x44, 0x69, 0xfd, 0x1b, 0xa0, 0x5d, 0x64, 0x6d, 0x18, 0x9c, 0x56, 0xda,
++      0x40, 0xad, 0x5b, 0x4b, 0xbf, 0x61, 0xe3, 0xeb, 0x7d, 0x58, 0x6e, 0x63,
++      0xb8, 0x7e, 0x24, 0x88, 0x65, 0xb7, 0x92, 0xe6, 0xde, 0x75, 0x0a, 0x97,
++      0x8d, 0x0f, 0x69, 0x47, 0x2d, 0x9d, 0x55, 0x06, 0x72, 0xcc, 0x13, 0x91,
++      0xe3, 0x82, 0xd5, 0xf7, 0x11, 0xab, 0xc3, 0x17, 0xe0, 0xb3, 0xb9, 0xb1,
++      0xd8, 0xa0, 0xcf, 0xad, 0x25, 0x88, 0xd3, 0xd3, 0xa4, 0x69, 0x14, 0x88,
++      0xdf, 0xb9, 0x46, 0x74, 0x4f, 0x91, 0x66, 0xbc, 0x48, 0x53, 0xcf, 0x83,
++      0x71, 0x73, 0x04, 0x9b, 0xe2, 0xac, 0x15, 0xcc, 0x79, 0x47, 0xa5, 0x27,
++      0x20, 0xbd, 0xf2, 0xe3, 0x06, 0xff, 0x1e, 0x54, 0x3b, 0x24, 0xa6, 0xca,
++      0x1d, 0x2b, 0x54, 0x73, 0x8d, 0xaa, 0xd4, 0x41, 0xcc, 0xd9, 0x6b, 0x0c,
++      0xc8, 0x1a, 0x03, 0xbf, 0x50, 0x5a, 0xe2, 0x9c, 0x92, 0x5c, 0xdd, 0x98,
++      0x39, 0xc7, 0x18, 0x3a, 0xac, 0xb4, 0x96, 0x63, 0x14, 0xdf, 0xaf, 0x0b,
++      0xfd, 0x83, 0xc5, 0x75, 0x06, 0xd0, 0x90, 0x67, 0x7c, 0x16, 0x7c, 0x6a,
++      0xc3, 0x44, 0x1b, 0x46, 0xa6, 0xdb, 0x30, 0x3c, 0xa1, 0x70, 0xb7, 0xb1,
++      0x18, 0x97, 0x6e, 0xb6, 0xfb, 0x94, 0xaa, 0xa5, 0x7a, 0x2d, 0x86, 0x42,
++      0xa8, 0x76, 0xe9, 0x5f, 0xc1, 0xae, 0x22, 0xc6, 0xdf, 0x74, 0xa2, 0x9b,
++      0x79, 0xdf, 0xc2, 0xfb, 0x8c, 0xa5, 0x58, 0x0d, 0xd2, 0xde, 0x54, 0x0b,
++      0xf1, 0x78, 0x9d, 0xdb, 0x89, 0xf7, 0x0f, 0x7d, 0x8e, 0x0d, 0x44, 0xff,
++      0x9f, 0xbf, 0xd7, 0x86, 0xc7, 0x27, 0xca, 0xd0, 0xb2, 0x1a, 0x77, 0x46,
++      0x50, 0xe5, 0x62, 0x8d, 0x7b, 0x73, 0xbb, 0x1a, 0xe4, 0x3d, 0xfb, 0x59,
++      0xdf, 0x97, 0x53, 0x46, 0xea, 0x4f, 0x1a, 0xe4, 0xba, 0x9d, 0x37, 0x6e,
++      0xb8, 0xde, 0xfd, 0x05, 0xd7, 0x15, 0x9e, 0x61, 0x22, 0xfb, 0x01, 0x6b,
++      0x4a, 0x3e, 0x67, 0xc1, 0x9d, 0xf2, 0xa0, 0x7f, 0x2c, 0x8a, 0x7d, 0x73,
++      0x61, 0xcc, 0xe5, 0xb4, 0xde, 0x4b, 0xec, 0x1f, 0x76, 0x35, 0xeb, 0x78,
++      0x60, 0x2e, 0x82, 0xd9, 0x1c, 0x2c, 0x7f, 0x4a, 0x9f, 0xf7, 0xab, 0x04,
++      0xf6, 0xce, 0xd5, 0xe1, 0x5c, 0x4e, 0xbf, 0x38, 0xac, 0xe2, 0x83, 0xb5,
++      0xc4, 0x1d, 0x0f, 0xce, 0x35, 0x61, 0xff, 0x9c, 0x8f, 0xef, 0x58, 0xd8,
++      0x92, 0xac, 0xe3, 0xf3, 0x2e, 0x3c, 0x7d, 0xd2, 0xb2, 0x04, 0x77, 0xf5,
++      0xcf, 0x01, 0xb3, 0xe3, 0xac, 0x45, 0x67, 0x58, 0x97, 0x9e, 0x00, 0xf6,
++      0x3e, 0xe1, 0xc2, 0xf4, 0xb8, 0x85, 0x5d, 0xc6, 0x70, 0xad, 0x8b, 0x0e,
++      0xdf, 0xcb, 0xba, 0xe1, 0x65, 0x0d, 0xbc, 0x27, 0xe4, 0xe4, 0xf3, 0x4b,
++      0xcc, 0x53, 0xf7, 0x3d, 0x91, 0xc0, 0x9b, 0xb9, 0x2c, 0xb6, 0x10, 0x9f,
++      0x0f, 0x92, 0x97, 0x37, 0x72, 0xac, 0x63, 0x73, 0x06, 0x5e, 0xcf, 0xf9,
++      0xb8, 0x4e, 0x13, 0x5e, 0xca, 0xc9, 0x33, 0xf2, 0x6c, 0x00, 0x7d, 0xe4,
++      0xe5, 0xb5, 0x5c, 0x84, 0x6b, 0x86, 0xf1, 0x53, 0x3e, 0x77, 0xef, 0x9c,
++      0xce, 0xba, 0xe5, 0xe3, 0xba, 0x51, 0xbc, 0x92, 0x0b, 0x90, 0xd7, 0x30,
++      0x6b, 0x55, 0x1f, 0x46, 0x72, 0x8d, 0x17, 0x37, 0x30, 0x51, 0x3b, 0xb5,
++      0x46, 0xae, 0xbd, 0x63, 0x75, 0xd9, 0xb1, 0x28, 0xeb, 0x94, 0xd6, 0xed,
++      0xc3, 0x70, 0xee, 0x75, 0x77, 0xa9, 0x9f, 0x7e, 0x66, 0x7c, 0xc1, 0xc6,
++      0x7e, 0x4f, 0x9b, 0xfc, 0x7d, 0x1a, 0x38, 0x67, 0x66, 0xad, 0xea, 0x14,
++      0xb1, 0x2e, 0x6b, 0xd4, 0x5b, 0x6b, 0x9a, 0xb8, 0xae, 0xde, 0xfb, 0xa2,
++      0x92, 0x7e, 0xc7, 0x83, 0xe8, 0x13, 0xa2, 0x2f, 0x62, 0xe6, 0x59, 0xe0,
++      0x47, 0xc4, 0x9f, 0x0d, 0x63, 0x9a, 0xf8, 0x7d, 0x86, 0xb8, 0xa6, 0x7b,
++      0x1e, 0xf5, 0x89, 0x07, 0x30, 0x64, 0x95, 0x11, 0x9f, 0x57, 0x13, 0xd7,
++      0xce, 0x35, 0xb1, 0x4e, 0xad, 0xb1, 0xac, 0xbf, 0x6d, 0x86, 0xe5, 0x4a,
++      0xe9, 0x46, 0xad, 0x7b, 0xfe, 0x2b, 0x55, 0xd0, 0x2f, 0x06, 0x95, 0x3e,
++      0xff, 0x16, 0xe2, 0x03, 0xe7, 0x21, 0x7a, 0x05, 0x56, 0xcc, 0x79, 0xb0,
++      0x92, 0xf2, 0x6c, 0x1c, 0xe3, 0xda, 0xc4, 0x27, 0x71, 0xca, 0xb4, 0x6d,
++      0x8c, 0x98, 0x4b, 0x0f, 0x60, 0x39, 0x75, 0xdc, 0x7f, 0xca, 0xb2, 0xca,
++      0xa9, 0xe3, 0x06, 0xda, 0x67, 0xcf, 0x09, 0x0b, 0x2f, 0x1a, 0x2f, 0x52,
++      0xa7, 0x8a, 0xb8, 0xb1, 0x99, 0xef, 0x84, 0xf9, 0xbc, 0x0f, 0x7b, 0xc7,
++      0xa4, 0x5f, 0xaa, 0xe3, 0x33, 0xaf, 0xe2, 0x58, 0x2e, 0x81, 0x26, 0xea,
++      0x2f, 0x4a, 0x9a, 0x8d, 0x7c, 0x27, 0x4a, 0x7a, 0xd1, 0xb9, 0xaf, 0x61,
++      0xf3, 0x29, 0x05, 0x3d, 0x2e, 0x3a, 0xf8, 0x1a, 0xda, 0xcf, 0x7c, 0x51,
++      0x4e, 0x60, 0x96, 0x1a, 0xd7, 0x8e, 0xcc, 0x13, 0x7f, 0x57, 0xa5, 0x86,
++      0xc0, 0xfa, 0x8d, 0x37, 0xa6, 0x14, 0x8e, 0x8f, 0xb3, 0xdf, 0x5b, 0x03,
++      0xab, 0x82, 0x32, 0xbd, 0x3e, 0xf5, 0x3b, 0x78, 0xea, 0x24, 0xf5, 0xf0,
++      0x64, 0x18, 0x3f, 0xc8, 0x79, 0xb0, 0xec, 0xb8, 0x60, 0x3a, 0x3d, 0xb1,
++      0x4f, 0x49, 0x7f, 0x24, 0x7d, 0x4b, 0x3c, 0xea, 0x55, 0x2e, 0xd4, 0x3f,
++      0xe5, 0x81, 0x7e, 0x2e, 0x0a, 0x6f, 0xbd, 0x0f, 0x7a, 0xfd, 0x1f, 0x32,
++      0xd7, 0xb8, 0x50, 0xc6, 0x5e, 0x76, 0xd3, 0x77, 0x13, 0xbc, 0x16, 0xe6,
++      0x35, 0xfc, 0x4e, 0x39, 0xdc, 0x4b, 0xdc, 0xac, 0xe1, 0x65, 0x3a, 0xf1,
++      0x98, 0xc7, 0xb2, 0xdc, 0xac, 0x0d, 0x3b, 0xbe, 0x67, 0x59, 0xb1, 0xd5,
++      0xf2, 0x7c, 0x08, 0xb1, 0x73, 0x3a, 0x9f, 0x73, 0xea, 0xe5, 0x75, 0x3c,
++      0xe6, 0xa6, 0x1f, 0x49, 0xac, 0xb2, 0xde, 0xdb, 0x3d, 0x94, 0x83, 0xdb,
++      0x9f, 0x2b, 0x08, 0xb6, 0x89, 0xda, 0x32, 0x9c, 0x1d, 0x57, 0xcc, 0xd9,
++      0x29, 0x3e, 0xbb, 0x1e, 0xee, 0xa4, 0x76, 0x24, 0x4b, 0x3f, 0xd8, 0x15,
++      0x6a, 0xc1, 0x33, 0xa6, 0x17, 0x95, 0xfa, 0x12, 0xdc, 0xdf, 0x1d, 0xc2,
++      0x33, 0xec, 0x0b, 0x68, 0xb3, 0xc4, 0x3c, 0xd8, 0x48, 0x07, 0x49, 0xcf,
++      0xf5, 0x63, 0xe8, 0xdf, 0x75, 0x31, 0xcf, 0xb9, 0xed, 0x3c, 0x57, 0x56,
++      0x0f, 0xcc, 0xe7, 0x3d, 0xb8, 0xa0, 0x3b, 0x98, 0xf0, 0x39, 0xbb, 0x66,
++      0x6b, 0xa1, 0xf9, 0x6b, 0x58, 0x50, 0x6b, 0x49, 0x2b, 0x32, 0x13, 0x14,
++      0xdd, 0x65, 0x3c, 0x8e, 0x2f, 0xfd, 0x8d, 0x5b, 0x7a, 0x8e, 0xeb, 0x7f,
++      0x57, 0xc0, 0x95, 0xd2, 0x22, 0x6d, 0x6e, 0xf8, 0x3c, 0xa9, 0xce, 0xd6,
++      0x51, 0xfd, 0x4b, 0x37, 0xf0, 0xde, 0x84, 0x91, 0xc2, 0xf5, 0x5e, 0xbb,
++      0x33, 0x67, 0xfb, 0x50, 0xa7, 0xe8, 0xfe, 0x31, 0x43, 0xf2, 0xec, 0xa0,
++      0x6a, 0x67, 0xde, 0xca, 0x7a, 0x90, 0xad, 0xe2, 0x33, 0xd4, 0x3f, 0x0e,
++      0x8f, 0x09, 0x9d, 0x83, 0x18, 0xcd, 0xc9, 0x6c, 0x63, 0x00, 0xeb, 0xcc,
++      0x58, 0xe2, 0x22, 0x7b, 0xe8, 0x43, 0x90, 0x39, 0x44, 0xe3, 0xfc, 0xcb,
++      0x4a, 0x1b, 0xbc, 0xc5, 0xad, 0xf5, 0x2f, 0x28, 0x27, 0x6f, 0xad, 0x28,
++      0xe6, 0xad, 0xe5, 0xf9, 0x25, 0xc1, 0x2e, 0xd6, 0x83, 0xae, 0xd9, 0x52,
++      0x7d, 0xe8, 0x52, 0x9b, 0xec, 0xda, 0x9a, 0x51, 0x5b, 0x67, 0x7d, 0xaa,
++      0x63, 0xc2, 0x87, 0x97, 0x89, 0xc5, 0xa6, 0x7a, 0x10, 0x5a, 0xb6, 0x06,
++      0xfe, 0xad, 0x13, 0xdd, 0x28, 0xd7, 0xa5, 0x87, 0x2c, 0xc7, 0x26, 0xbb,
++      0xae, 0xd5, 0x05, 0xbb, 0x58, 0x7f, 0xba, 0x0a, 0x3d, 0xcc, 0x7f, 0x08,
++      0xf9, 0x53, 0xce, 0xcc, 0x40, 0x72, 0xe1, 0xed, 0x7c, 0xf7, 0x62, 0x72,
++      0x11, 0xe0, 0xd4, 0x3f, 0x95, 0x61, 0x2f, 0x51, 0xbd, 0x5a, 0xe1, 0xd2,
++      0x9d, 0x3e, 0x90, 0x16, 0x7b, 0xfe, 0x7c, 0xeb, 0x85, 0xf1, 0x6e, 0xd5,
++      0x31, 0x3d, 0xe3, 0xdf, 0x68, 0xca, 0x2c, 0x62, 0xca, 0xdf, 0x4e, 0x1e,
++      0xda, 0x67, 0x9f, 0xf4, 0x6f, 0x20, 0x4f, 0x1b, 0x66, 0x3f, 0x4f, 0x53,
++      0xea, 0x4a, 0x7f, 0x6b, 0x1b, 0x63, 0x7b, 0x87, 0xf1, 0x91, 0x15, 0xfd,
++      0xa6, 0xd0, 0x99, 0x2b, 0xea, 0x33, 0x4d, 0xbe, 0xc2, 0xbe, 0x4d, 0x85,
++      0x90, 0x2f, 0x5d, 0x68, 0xf7, 0xb7, 0x99, 0xdd, 0xfe, 0x0d, 0x66, 0x8f,
++      0xbf, 0xdd, 0xdc, 0x49, 0xda, 0x5d, 0xfe, 0x0e, 0x93, 0x71, 0x5d, 0xe8,
++      0xa1, 0x5e, 0xbb, 0x31, 0x5a, 0xd8, 0x49, 0xec, 0x21, 0x34, 0x7b, 0x89,
++      0x83, 0xfc, 0x94, 0x71, 0x88, 0x32, 0xce, 0x47, 0xbc, 0x48, 0x6b, 0x5e,
++      0xea, 0x6b, 0xc4, 0xb6, 0xe3, 0x11, 0x7b, 0x16, 0x55, 0x91, 0x7a, 0xa0,
++      0x75, 0xcb, 0x09, 0xe6, 0xfb, 0xd4, 0x9e, 0xd6, 0x65, 0xa7, 0x50, 0xe3,
++      0x4d, 0x49, 0xef, 0xcc, 0x7e, 0x38, 0x1e, 0x37, 0xde, 0x43, 0x3c, 0xf2,
++      0x32, 0x9f, 0x1d, 0xa6, 0xef, 0x8e, 0xd8, 0xf3, 0x07, 0x1a, 0x24, 0xdf,
++      0x84, 0x2d, 0xa6, 0xcf, 0xbf, 0x8d, 0xbd, 0x59, 0x30, 0xa5, 0xb5, 0xdc,
++      0xee, 0x96, 0x79, 0xc8, 0xfc, 0xef, 0x05, 0xd0, 0x84, 0xce, 0x82, 0x8f,
++      0x72, 0x7d, 0x09, 0x7f, 0x7f, 0x92, 0x75, 0x0d, 0xe2, 0x87, 0x96, 0x75,
++      0x2f, 0xfb, 0x9a, 0xa3, 0xf9, 0x3a, 0x5c, 0xb6, 0x6d, 0xec, 0xc1, 0xe1,
++      0x7c, 0x14, 0xef, 0x50, 0x3e, 0xcf, 0x5c, 0x2d, 0xde, 0x1e, 0x77, 0x63,
++      0xb7, 0x71, 0x5b, 0xb1, 0x5e, 0xb8, 0x70, 0x4f, 0xe2, 0x00, 0xb1, 0x83,
++      0x0b, 0xd5, 0xc4, 0x6f, 0x0f, 0xda, 0xd7, 0xdc, 0xec, 0xff, 0xbe, 0x8e,
++      0x41, 0xa7, 0x9e, 0x90, 0xc7, 0x9d, 0xe4, 0xb1, 0xd9, 0xbf, 0x61, 0x42,
++      0xf3, 0xdf, 0x31, 0x01, 0x9f, 0x37, 0xb5, 0xab, 0xf5, 0xcc, 0x49, 0x0b,
++      0x7d, 0xc6, 0xad, 0xb8, 0x72, 0x72, 0xb8, 0xdf, 0x43, 0xff, 0xf9, 0x65,
++      0x32, 0x03, 0x73, 0x12, 0x17, 0x88, 0x3c, 0x5e, 0x0d, 0x30, 0xb7, 0x37,
++      0x24, 0xe3, 0x21, 0xd6, 0x62, 0x63, 0x96, 0xb1, 0xd9, 0x01, 0xad, 0x9f,
++      0x35, 0x39, 0xed, 0x4e, 0xc5, 0x7b, 0x47, 0x08, 0x1e, 0xab, 0xc8, 0x8f,
++      0x9f, 0xb9, 0x3b, 0x30, 0x17, 0xf5, 0xef, 0x60, 0xbd, 0x89, 0xb0, 0xbf,
++      0xf3, 0xc7, 0x71, 0x5b, 0x2d, 0xe2, 0x89, 0x05, 0xca, 0xed, 0x9d, 0x6b,
++      0xf2, 0xdf, 0xce, 0xfa, 0x71, 0x39, 0x6e, 0x0d, 0xbd, 0x68, 0x04, 0x10,
++      0x9c, 0x33, 0xa8, 0xef, 0x0c, 0x86, 0x67, 0xd9, 0x72, 0xc5, 0xd9, 0xf3,
++      0xcf, 0xb5, 0xf8, 0xb7, 0x31, 0x36, 0xab, 0x68, 0xa2, 0xc6, 0xb9, 0xb4,
++      0x5f, 0x7a, 0xbe, 0xa6, 0xb9, 0xb5, 0xe4, 0x4f, 0x7c, 0x74, 0x5f, 0xeb,
++      0x3a, 0xfa, 0x43, 0x74, 0x0e, 0x9b, 0x98, 0xe6, 0x5e, 0x22, 0xcd, 0x4c,
++      0x84, 0x18, 0x76, 0xef, 0x9a, 0x00, 0xf3, 0x94, 0xe8, 0x92, 0x7a, 0x2c,
++      0x94, 0x64, 0x92, 0xba, 0xbc, 0xa7, 0x75, 0xee, 0x94, 0xd4, 0xe5, 0x4c,
++      0x6b, 0xee, 0x94, 0x8e, 0x77, 0x58, 0x5b, 0x56, 0x24, 0x35, 0xe3, 0x9c,
++      0x8a, 0x45, 0x5e, 0xa5, 0x2c, 0x1e, 0xfc, 0xca, 0xda, 0xa5, 0xc7, 0xe7,
++      0x6f, 0x61, 0x3c, 0x55, 0x33, 0x37, 0x46, 0x98, 0xf3, 0xab, 0xe7, 0xa8,
++      0x98, 0x39, 0xb7, 0x17, 0x15, 0x11, 0xf8, 0xe2, 0x3a, 0xde, 0x3d, 0x99,
++      0xa0, 0x1e, 0xae, 0xd1, 0xdc, 0x47, 0xa8, 0xd5, 0xc7, 0x52, 0xf8, 0xc8,
++      0x53, 0xf4, 0xc5, 0x51, 0xae, 0x5b, 0x36, 0x27, 0x3c, 0xcb, 0xf3, 0x61,
++      0x3e, 0x7f, 0x7d, 0xed, 0x6a, 0xae, 0xfd, 0xd1, 0x29, 0xf1, 0xd7, 0x4c,
++      0xeb, 0x85, 0x93, 0xce, 0xda, 0xf1, 0x64, 0x02, 0x1f, 0x9e, 0xd4, 0x06,
++      0xde, 0x55, 0xb1, 0xde, 0x0b, 0x4a, 0xd6, 0x47, 0x5d, 0x15, 0xae, 0x58,
++      0xc3, 0xf1, 0xf8, 0xe0, 0x2e, 0xd2, 0x6c, 0x59, 0x4b, 0xfd, 0xdb, 0x7c,
++      0xd0, 0xe7, 0x99, 0x67, 0xbd, 0xe4, 0xc7, 0xe1, 0xa5, 0x8e, 0xb4, 0x4f,
++      0x16, 0x7b, 0x35, 0xf6, 0xa9, 0xd7, 0xf9, 0x09, 0x53, 0x0f, 0xbe, 0x1d,
++      0xcd, 0x01, 0xd4, 0xda, 0xcf, 0x85, 0xf8, 0x9c, 0xe8, 0xe1, 0xd7, 0xca,
++      0xa5, 0xbf, 0xc7, 0x3c, 0x26, 0xb9, 0x24, 0xcc, 0x1c, 0xb6, 0x53, 0x7a,
++      0xda, 0x6c, 0x96, 0xfe, 0xee, 0xa5, 0xbf, 0x6f, 0x14, 0x9f, 0x36, 0xe9,
++      0xd3, 0x26, 0x7d, 0xda, 0xd4, 0x22, 0x03, 0x88, 0x85, 0xfa, 0x68, 0xb7,
++      0x74, 0x44, 0x7c, 0xbd, 0x07, 0xbb, 0xf9, 0xd9, 0xc3, 0xfb, 0x87, 0xd9,
++      0xe7, 0x62, 0x91, 0xac, 0x79, 0x10, 0xed, 0xe6, 0x23, 0xe8, 0x9f, 0xc0,
++      0x6f, 0xfc, 0xcd, 0xe5, 0x28, 0x5f, 0x2e, 0x3d, 0xbc, 0x16, 0x3a, 0x8a,
++      0x47, 0xd8, 0x47, 0xfd, 0x5a, 0x55, 0xea, 0x9e, 0xee, 0x63, 0x4a, 0x0b,
++      0xb5, 0xb3, 0x1f, 0xde, 0x55, 0xd8, 0x49, 0xfb, 0xc6, 0xfa, 0x5f, 0x56,
++      0xec, 0xa5, 0x6a, 0xb9, 0x36, 0x63, 0xe9, 0x0e, 0xae, 0x63, 0x0a, 0x1f,
++      0x76, 0xbe, 0xfd, 0x7d, 0x88, 0x6e, 0x7f, 0xd2, 0xd0, 0xc7, 0xf5, 0x1d,
++      0x3e, 0x86, 0xd9, 0x53, 0xf6, 0x31, 0xc6, 0x76, 0xdb, 0xf1, 0xd5, 0x43,
++      0x1a, 0xd7, 0xf3, 0xd8, 0x86, 0x9c, 0xd4, 0x52, 0x0b, 0x8f, 0x1a, 0x16,
++      0x9e, 0xe6, 0xe7, 0x22, 0x73, 0xd9, 0xc8, 0x0d, 0xb9, 0xcc, 0xc5, 0xe7,
++      0x76, 0xf0, 0xb9, 0x16, 0xa6, 0xce, 0xd9, 0x69, 0x99, 0x0d, 0x1e, 0x94,
++      0xd9, 0x20, 0xf2, 0xa6, 0xe8, 0x7e, 0x00, 0x17, 0x72, 0xb1, 0x41, 0xb7,
++      0xdb, 0x1a, 0x62, 0x5c, 0x5d, 0xfc, 0x88, 0xbe, 0xfb, 0xda, 0x1a, 0xad,
++      0x9b, 0x3a, 0x4c, 0x8c, 0x29, 0x2d, 0xf2, 0x33, 0xcc, 0x6f, 0xf2, 0xa1,
++      0x31, 0xba, 0xd2, 0x1d, 0x0f, 0x9d, 0x85, 0x36, 0xdf, 0x47, 0x49, 0x9f,
++      0x2c, 0x38, 0xb9, 0x6e, 0x5d, 0x31, 0xd7, 0xb5, 0xe4, 0x2b, 0xd4, 0x1d,
++      0x13, 0xac, 0xcf, 0xd3, 0x56, 0x36, 0xc8, 0x7a, 0x55, 0x98, 0x16, 0xda,
++      0x43, 0x68, 0x4c, 0x0a, 0x2d, 0xbd, 0x73, 0x4c, 0xe1, 0x1b, 0x95, 0x88,
++      0xb3, 0x56, 0xc1, 0x28, 0xd7, 0xb3, 0x16, 0x6b, 0x52, 0xc8, 0x9b, 0x92,
++      0xda, 0xd9, 0xc5, 0xbe, 0xa5, 0x87, 0x79, 0x51, 0x30, 0xb5, 0xcc, 0x4b,
++      0x9d, 0x7c, 0xb4, 0xb1, 0x20, 0x76, 0x11, 0x9b, 0x88, 0x6d, 0x0e, 0xe2,
++      0x1e, 0x53, 0x7a, 0x7f, 0x0b, 0xe3, 0x46, 0x3c, 0xfa, 0x14, 0xc4, 0x4e,
++      0x07, 0xa9, 0x0b, 0x2f, 0x76, 0x33, 0x0f, 0xee, 0x6a, 0xa6, 0xae, 0x82,
++      0x5e, 0xec, 0xb2, 0x67, 0x09, 0x25, 0xfd, 0x79, 0x69, 0x43, 0xc5, 0x1a,
++      0x37, 0xeb, 0x75, 0xf4, 0xe8, 0xcc, 0x26, 0xdd, 0x29, 0xa1, 0x57, 0x9a,
++      0x4b, 0x3a, 0xba, 0xdb, 0x94, 0x13, 0xba, 0x16, 0xce, 0x1a, 0x0e, 0x6e,
++      0x2d, 0xe9, 0x2c, 0x42, 0xb9, 0x6a, 0xd6, 0x02, 0x2b, 0x6f, 0xc0, 0xae,
++      0x15, 0xbc, 0xb6, 0xe5, 0x3a, 0x76, 0xcd, 0x08, 0x3e, 0x26, 0x76, 0xed,
++      0xdc, 0x4a, 0xec, 0x5a, 0xaf, 0x4a, 0xb8, 0x55, 0xe6, 0x12, 0x25, 0xec,
++      0x5a, 0x5d, 0xcc, 0xd1, 0x07, 0xb1, 0x8b, 0xb8, 0xa6, 0xb6, 0x7e, 0x08,
++      0xbe, 0x55, 0xae, 0xcf, 0x5c, 0x18, 0x62, 0xbf, 0x52, 0x06, 0x2c, 0xb6,
++      0x70, 0xcb, 0xea, 0xac, 0x55, 0xae, 0xd7, 0x47, 0xcb, 0x5d, 0x32, 0x77,
++      0x8e, 0x67, 0x47, 0x98, 0x4b, 0x5c, 0xab, 0xb4, 0x6c, 0x1a, 0xbe, 0x50,
++      0x8d, 0xbe, 0xb3, 0xd8, 0x2f, 0x44, 0x7c, 0x9b, 0x89, 0x7b, 0xe2, 0xc9,
++      0x4f, 0xad, 0xa9, 0xb0, 0xd0, 0x98, 0x9f, 0xf7, 0x21, 0xfd, 0x90, 0x8f,
++      0x75, 0x68, 0x41, 0x1d, 0xc1, 0x6b, 0xf1, 0x88, 0x6f, 0x5b, 0x21, 0xeb,
++      0xdf, 0xd2, 0x70, 0x0b, 0xba, 0x4e, 0x49, 0xcd, 0x89, 0x62, 0xeb, 0xa9,
++      0x76, 0xd6, 0x19, 0x1d, 0x1d, 0x63, 0x9d, 0xec, 0xe3, 0xba, 0x55, 0xf7,
++      0xb4, 0xe8, 0x49, 0xf4, 0xac, 0x85, 0xa2, 0xae, 0x1b, 0xe7, 0xa2, 0xa5,
++      0x9e, 0xf8, 0x3d, 0xdb, 0x87, 0x46, 0x8d, 0x10, 0xf5, 0xf3, 0x2b, 0x2f,
++      0x82, 0x16, 0xce, 0x18, 0xe2, 0x7b, 0xfc, 0xdb, 0x4c, 0x63, 0x63, 0xf3,
++      0xb8, 0xe5, 0xd1, 0x65, 0xbe, 0x1d, 0xb1, 0xed, 0xb6, 0x81, 0xb5, 0xac,
++      0x7d, 0xba, 0x87, 0xb6, 0x2a, 0xcd, 0xb2, 0x6f, 0xb4, 0xd9, 0x7a, 0xff,
++      0x46, 0xe6, 0x35, 0xf6, 0xe9, 0x3e, 0x1f, 0x73, 0xa5, 0xef, 0x94, 0x85,
++      0x69, 0xe3, 0x4d, 0xeb, 0x51, 0xdd, 0x43, 0xbb, 0x7c, 0x95, 0x79, 0x57,
++      0x70, 0x49, 0xca, 0x7f, 0xfb, 0xa4, 0xc7, 0x55, 0x95, 0x42, 0x73, 0x19,
++      0x7d, 0xee, 0xd5, 0xa4, 0x33, 0x73, 0x3c, 0x96, 0xbf, 0xcd, 0xbf, 0x65,
++      0x82, 0xbd, 0x04, 0x7b, 0x5d, 0xa7, 0xbf, 0xfb, 0xaa, 0xff, 0xee, 0x09,
++      0xb7, 0xaa, 0x4d, 0xc1, 0xdd, 0xb2, 0xd6, 0xc2, 0xc7, 0xab, 0xe3, 0x83,
++      0x11, 0x17, 0x73, 0x24, 0x69, 0x99, 0xf9, 0x66, 0x7f, 0x86, 0x39, 0x79,
++      0xdb, 0x04, 0xd2, 0x32, 0x9f, 0x0d, 0xae, 0x1e, 0xee, 0x0d, 0x42, 0x66,
++      0x69, 0xf8, 0x06, 0xa3, 0x32, 0x4c, 0x9f, 0x8b, 0xb4, 0xa9, 0xf8, 0x42,
++      0x3f, 0xe2, 0x17, 0x3f, 0x76, 0xbf, 0x69, 0x3d, 0x9e, 0x5f, 0xcb, 0xe7,
++      0x3b, 0x99, 0x2f, 0xd3, 0xcc, 0x9f, 0xc3, 0x83, 0x5e, 0xc8, 0x3b, 0x5a,
++      0xe6, 0x0d, 0x15, 0xa3, 0xaf, 0xe3, 0x9b, 0x7c, 0x3e, 0xd4, 0xc1, 0x5c,
++      0x39, 0x6d, 0xc4, 0xd3, 0x1b, 0x90, 0xed, 0xac, 0x86, 0x66, 0x34, 0x28,
++      0x99, 0x7d, 0x89, 0x1d, 0x12, 0xf8, 0x39, 0xd7, 0xf4, 0xe8, 0xa2, 0xc7,
++      0xf5, 0xe8, 0x9b, 0x66, 0xfd, 0xbf, 0xe6, 0x6f, 0xa2, 0x03, 0xd1, 0xcb,
++      0x37, 0xcb, 0x50, 0xb1, 0x88, 0xb2, 0xfd, 0xdc, 0xce, 0x2b, 0x7e, 0x5d,
++      0xc7, 0x7f, 0x26, 0x3e, 0xfa, 0x4f, 0x05, 0x99, 0x71, 0x96, 0x30, 0x9f,
++      0xdd, 0x47, 0xb5, 0x2e, 0x9b, 0x4a, 0x14, 0x67, 0x9e, 0x3e, 0x7f, 0xe7,
++      0xa4, 0x85, 0x93, 0x46, 0x10, 0xd2, 0xe3, 0x97, 0x27, 0xe7, 0x89, 0x00,
++      0x9a, 0xd0, 0xc1, 0xeb, 0xed, 0x93, 0x95, 0xaa, 0x7d, 0xc2, 0xc2, 0x5f,
++      0x18, 0x5a, 0xb6, 0xcd, 0xcd, 0x98, 0x36, 0xb4, 0xb3, 0xc0, 0x3b, 0xc4,
++      0x4a, 0xe2, 0x63, 0x1e, 0x04, 0x74, 0x87, 0x56, 0xd3, 0xd4, 0x6d, 0xc4,
++      0x0f, 0x12, 0x63, 0xee, 0x15, 0x15, 0x48, 0xaa, 0x29, 0x8f, 0xe8, 0xad,
++      0x13, 0xe9, 0x42, 0xa5, 0xda, 0x4e, 0x5d, 0xde, 0xb1, 0xaa, 0x0c, 0x97,
++      0x6c, 0x5d, 0xde, 0x46, 0x5d, 0xe2, 0xf5, 0xa5, 0x70, 0x5f, 0xa8, 0x45,
++      0xa7, 0x82, 0xdd, 0x9f, 0x55, 0xb2, 0x4e, 0xa7, 0x89, 0x6f, 0x89, 0x07,
++      0x43, 0x3d, 0xf8, 0x2e, 0xf3, 0xcd, 0xa3, 0xf4, 0xd5, 0x5f, 0xe9, 0x4d,
++      0xa8, 0xf8, 0x5e, 0x33, 0xed, 0xb8, 0xd6, 0xbf, 0x79, 0x22, 0x83, 0xc7,
++      0x66, 0x2d, 0x3c, 0xc5, 0x38, 0x69, 0x48, 0x66, 0x43, 0xe5, 0xec, 0xd7,
++      0x58, 0xd3, 0x16, 0x4e, 0xd8, 0x7e, 0xbe, 0xab, 0x75, 0xfd, 0x4c, 0x04,
++      0xee, 0xef, 0xca, 0xef, 0x3b, 0x5b, 0xa3, 0x33, 0xf2, 0x9d, 0xe1, 0xb7,
++      0x85, 0x01, 0x43, 0x4b, 0x7f, 0xec, 0xae, 0x40, 0x65, 0xdc, 0xb2, 0x06,
++      0x92, 0x72, 0xbd, 0xaf, 0x35, 0x61, 0xdf, 0xdf, 0xc3, 0xef, 0xd2, 0x4c,
++      0xfa, 0x6f, 0x04, 0x0b, 0x46, 0xd3, 0x94, 0x79, 0x2b, 0xeb, 0x7b, 0x86,
++      0xf5, 0xbd, 0x36, 0xa5, 0xa5, 0x77, 0xb8, 0x65, 0xfe, 0x32, 0x7f, 0xa0,
++      0x9a, 0xd7, 0x6f, 0x2f, 0xd6, 0xf7, 0xaa, 0x53, 0x32, 0xd3, 0x23, 0x06,
++      0x84, 0xb3, 0x17, 0xd2, 0xc5, 0xfa, 0x5e, 0x31, 0xe6, 0xc1, 0x16, 0xd6,
++      0x76, 0x2f, 0xb1, 0xf8, 0xc6, 0x7c, 0x2d, 0xfc, 0x27, 0xdc, 0x88, 0x25,
++      0x7f, 0x82, 0x03, 0xf4, 0xb1, 0x03, 0x09, 0xb7, 0x8a, 0x2e, 0x71, 0x51,
++      0x4f, 0xff, 0x88, 0x7d, 0x21, 0x37, 0xaa, 0xf4, 0x9f, 0xe1, 0x81, 0x2f,
++      0xa8, 0xe9, 0x99, 0x09, 0x89, 0xed, 0x5d, 0xad, 0x5b, 0x4e, 0x39, 0x35,
++      0x3d, 0x70, 0x6a, 0x78, 0x41, 0x6a, 0x7a, 0xed, 0xea, 0x0c, 0x4e, 0x4f,
++      0xe2, 0x3b, 0x4b, 0x09, 0x1e, 0x6b, 0xb9, 0x66, 0x7d, 0x32, 0xce, 0xde,
++      0x5a, 0xeb, 0xef, 0x50, 0xf1, 0x23, 0x55, 0xcc, 0x01, 0xa7, 0x59, 0xd3,
++      0x7d, 0xa9, 0x78, 0x28, 0xe1, 0x42, 0x97, 0x97, 0xf6, 0x78, 0x9f, 0x7d,
++      0xf6, 0x5b, 0xf9, 0x28, 0x69, 0x96, 0xc1, 0xc3, 0x9a, 0xfe, 0xbe, 0x8e,
++      0xcf, 0xdc, 0xf4, 0xbd, 0x77, 0xdc, 0x3e, 0x5c, 0xcd, 0x3b, 0x35, 0xbd,
++      0xba, 0xc1, 0x1a, 0xba, 0x9c, 0x0c, 0xe0, 0x4a, 0xde, 0xa0, 0x0f, 0x66,
++      0x70, 0x98, 0x35, 0xfd, 0xb2, 0x1e, 0xc2, 0x87, 0xf9, 0x16, 0xfa, 0x65,
++      0x18, 0xbf, 0x24, 0xfe, 0x5d, 0xc5, 0x9a, 0x7e, 0x27, 0x7d, 0x2a, 0xc9,
++      0x9a, 0xde, 0x66, 0xe3, 0x8d, 0x7d, 0xad, 0x67, 0xc6, 0xed, 0x9a, 0xde,
++      0xe0, 0x62, 0x3d, 0xf4, 0x22, 0xbe, 0xc0, 0x3c, 0x61, 0xfd, 0x6a, 0x6d,
++      0x80, 0xcf, 0x52, 0x6f, 0x85, 0xd5, 0x98, 0xb2, 0x6b, 0xd0, 0x7a, 0xff,
++      0x76, 0xae, 0xbd, 0xd8, 0x8e, 0x33, 0x0b, 0x5b, 0x57, 0xbd, 0x86, 0x3f,
++      0xaa, 0x71, 0xd1, 0x0f, 0x53, 0xfe, 0x3b, 0x18, 0x6b, 0xc1, 0x54, 0x69,
++      0xe6, 0x91, 0xe0, 0x3a, 0xb7, 0xf9, 0xef, 0xa4, 0x6f, 0xdc, 0xb2, 0x8a,
++      0x99, 0x24, 0xe4, 0xc4, 0x59, 0x3b, 0xe3, 0x2c, 0xc2, 0x38, 0x5b, 0xca,
++      0x38, 0x7b, 0xdc, 0x88, 0x27, 0xd6, 0x13, 0x77, 0xbd, 0x9c, 0x97, 0x58,
++      0x6b, 0x26, 0x5d, 0x8d, 0x72, 0x0d, 0xf7, 0x4a, 0xcc, 0x6c, 0x5d, 0x35,
++      0x7c, 0xb6, 0x12, 0xa2, 0x2b, 0x7c, 0xb6, 0x98, 0x18, 0x83, 0x99, 0xe9,
++      0xe2, 0x82, 0x3b, 0x3e, 0x78, 0xab, 0x3b, 0x3e, 0xf0, 0x9e, 0x7a, 0xd3,
++      0x7a, 0x9d, 0x71, 0xb6, 0x8d, 0x71, 0xb6, 0x9d, 0x71, 0xd6, 0x66, 0x5a,
++      0x78, 0x2e, 0xa9, 0x65, 0x9a, 0x5c, 0x31, 0xa3, 0xcd, 0x85, 0xa5, 0x95,
++      0x2c, 0x0d, 0x7e, 0xc4, 0x3b, 0xff, 0x88, 0xfc, 0x5f, 0x34, 0xe2, 0xdd,
++      0x09, 0x25, 0xb1, 0x15, 0xc5, 0x07, 0x94, 0xbb, 0xbc, 0x18, 0x5b, 0x7b,
++      0xa7, 0xcf, 0x17, 0x7d, 0xa3, 0x24, 0xbb, 0x1b, 0xcf, 0x1a, 0xcc, 0xa5,
++      0x8b, 0xb4, 0x68, 0xd6, 0xd5, 0x83, 0x23, 0xd4, 0xa3, 0x3f, 0xde, 0x83,
++      0xa3, 0xac, 0x87, 0xf7, 0xb2, 0x0e, 0xdf, 0x67, 0xc6, 0x5a, 0x36, 0xb3,
++      0xff, 0xb9, 0x14, 0xd1, 0xa2, 0x51, 0xd5, 0x83, 0x3e, 0xfa, 0x70, 0x1f,
++      0xeb, 0x46, 0x9b, 0xf9, 0x6b, 0xd5, 0x41, 0xac, 0xb0, 0xa7, 0x20, 0xef,
++      0x69, 0x89, 0x5e, 0x57, 0x3f, 0x7a, 0x67, 0x25, 0xb7, 0x21, 0x74, 0x53,
++      0xaa, 0x07, 0xc7, 0xcd, 0x32, 0xf4, 0x34, 0x77, 0xa9, 0xdb, 0x0b, 0x32,
++      0x7f, 0x63, 0x3c, 0x9a, 0x8c, 0x57, 0x9b, 0x5f, 0x85, 0x7c, 0xbc, 0x0b,
++      0x39, 0x89, 0x4f, 0x73, 0xbb, 0xba, 0x73, 0x5a, 0x62, 0xbc, 0x47, 0xf5,
++      0x48, 0x0c, 0x9b, 0x83, 0xea, 0x2e, 0x89, 0x69, 0x7b, 0x66, 0x2d, 0x71,
++      0x2f, 0x7b, 0x1a, 0xb7, 0x11, 0xc7, 0x81, 0x31, 0xe5, 0xfe, 0x5e, 0x84,
++      0x71, 0xd7, 0x56, 0xe6, 0xa2, 0x9f, 0xc6, 0x68, 0x3b, 0x17, 0xda, 0x8d,
++      0xdf, 0xb1, 0xb2, 0xa1, 0x5e, 0xc6, 0x54, 0x0f, 0x0e, 0x9b, 0x5f, 0xb6,
++      0x2e, 0xdb, 0xf8, 0xa4, 0x94, 0xd7, 0xd7, 0xe3, 0x9e, 0x89, 0x25, 0xf0,
++      0xe9, 0x52, 0xb7, 0x03, 0x48, 0xd4, 0xf8, 0x50, 0xa1, 0x4b, 0xbd, 0xd9,
++      0xd7, 0x3a, 0x77, 0x42, 0x49, 0xff, 0x51, 0x8c, 0xef, 0xf5, 0xb8, 0x9f,
++      0x79, 0x60, 0x77, 0xf2, 0x1e, 0xdc, 0x17, 0xaa, 0x40, 0x90, 0x7a, 0xda,
++      0x1f, 0x0a, 0x30, 0xbf, 0xfe, 0x7e, 0x91, 0xce, 0xb3, 0x65, 0xc5, 0xbe,
++      0xfa, 0x1a, 0xb6, 0xaa, 0x65, 0x8c, 0xad, 0x9b, 0x94, 0x39, 0x51, 0xa6,
++      0x35, 0x32, 0xa9, 0x23, 0xc8, 0x7e, 0x76, 0x7d, 0x52, 0x1b, 0x5c, 0xef,
++      0x8e, 0x49, 0xaf, 0x92, 0x0b, 0x12, 0xd7, 0xe5, 0xe3, 0xf1, 0xee, 0x26,
++      0xd1, 0xb1, 0x1e, 0xc1, 0x26, 0xea, 0x69, 0x4b, 0x3e, 0xcc, 0x18, 0x5a,
++      0x28, 0x13, 0x8c, 0x94, 0xce, 0x5f, 0xa7, 0x15, 0x21, 0xad, 0xc8, 0xa4,
++      0xe0, 0xb5, 0x0c, 0xf1, 0x9a, 0xce, 0x38, 0xb4, 0xac, 0x75, 0xc4, 0x69,
++      0x81, 0x53, 0x32, 0x6f, 0x8a, 0x1d, 0x21, 0xb6, 0x6d, 0x22, 0xee, 0xed,
++      0xa1, 0x57, 0x5b, 0xb7, 0xd4, 0xc7, 0x8d, 0x36, 0x85, 0x47, 0x66, 0x9a,
++      0xe1, 0x73, 0x93, 0xe6, 0x3b, 0xf9, 0x10, 0x2e, 0xe7, 0x23, 0x78, 0x9b,
++      0xb4, 0x2f, 0xd9, 0xb4, 0xeb, 0xf0, 0x8b, 0x62, 0xde, 0x4a, 0x32, 0x6f,
++      0x6d, 0x98, 0x50, 0xf4, 0xd7, 0x28, 0x86, 0x8c, 0xbf, 0xfe, 0xec, 0xd2,
++      0xcd, 0x3e, 0xea, 0x4d, 0x64, 0xf1, 0xf0, 0x7b, 0x14, 0xfb, 0xed, 0x3c,
++      0xfd, 0xda, 0x67, 0x53, 0x35, 0xb4, 0x15, 0x75, 0x5f, 0x5d, 0x7c, 0x6f,
++      0xe5, 0x54, 0xa1, 0x28, 0xaf, 0x0e, 0xd7, 0xa9, 0x04, 0xca, 0x4e, 0x5d,
++      0xe3, 0x55, 0x97, 0xf8, 0x60, 0x65, 0x7d, 0xe4, 0xfb, 0x5c, 0xff, 0x21,
++      0x62, 0x3e, 0x8b, 0xeb, 0x5f, 0xb5, 0xd7, 0x0d, 0x73, 0x5d, 0x75, 0x0d,
++      0x1f, 0x46, 0xae, 0xbd, 0x13, 0xa2, 0xec, 0x78, 0x38, 0x42, 0xdd, 0x5d,
++      0x59, 0x23, 0xcf, 0x05, 0x70, 0x7b, 0x7e, 0x55, 0xb9, 0xe4, 0x71, 0x3f,
++      0xfb, 0x01, 0xc7, 0x97, 0x88, 0xf7, 0xcc, 0xe7, 0x79, 0x4f, 0xf0, 0xd7,
++      0x7a, 0x62, 0x8d, 0xcf, 0xeb, 0x3d, 0x4c, 0x5b, 0x94, 0xd1, 0x78, 0x72,
++      0xef, 0x8b, 0xea, 0xe8, 0x9f, 0x61, 0x90, 0xbd, 0xd0, 0x43, 0x13, 0x59,
++      0xec, 0x9f, 0xf8, 0x63, 0x7b, 0x8f, 0x6e, 0xe5, 0x6a, 0xec, 0xe1, 0x9a,
++      0xfb, 0xaa, 0x19, 0x47, 0xff, 0x2d, 0x19, 0x17, 0x8c, 0xb4, 0xbd, 0x12,
++      0x52, 0x6b, 0xe3, 0x2d, 0xb7, 0x2a, 0x0b, 0x65, 0x49, 0x0c, 0xb4, 0x37,
++      0xc7, 0x13, 0x97, 0xf1, 0x88, 0x25, 0xf3, 0x6e, 0x77, 0xb1, 0xee, 0x12,
++      0x97, 0xaa, 0x76, 0xd6, 0xde, 0xb6, 0x22, 0x56, 0xda, 0x50, 0x78, 0xf3,
++      0x73, 0x33, 0x05, 0xe9, 0xc7, 0xa5, 0xde, 0xf8, 0x55, 0x1b, 0xd7, 0x39,
++      0xcc, 0x9c, 0xfd, 0xac, 0xf1, 0x62, 0x84, 0xd5, 0x18, 0x9e, 0x55, 0x0a,
++      0x07, 0x0c, 0x2f, 0xb2, 0x61, 0x0b, 0xdb, 0xf9, 0xbd, 0x97, 0xf8, 0xe9,
++      0x5d, 0xa3, 0x0a, 0x53, 0xa1, 0x10, 0x31, 0x23, 0x73, 0xb0, 0xeb, 0xff,
++      0x78, 0x65, 0x5f, 0x27, 0xea, 0x92, 0x3d, 0xf8, 0x7f, 0x6d, 0x5f, 0x66,
++      0x15, 0xf1, 0x8b, 0xc8, 0xee, 0x57, 0xcc, 0xa1, 0x09, 0x10, 0xd3, 0xec,
++      0x32, 0xe6, 0xa3, 0x2e, 0xa4, 0xaf, 0xba, 0xa0, 0x9d, 0x7e, 0x87, 0x7d,
++      0xde, 0x43, 0xf5, 0xda, 0xe9, 0x56, 0xb7, 0x8e, 0xc1, 0xe3, 0x3e, 0x3c,
++      0x78, 0xbc, 0x03, 0xd5, 0xf6, 0x7c, 0x68, 0x94, 0x3a, 0x75, 0xb1, 0xbf,
++      0x1a, 0xfe, 0xd4, 0xc3, 0x3e, 0xeb, 0xea, 0xea, 0x87, 0xd1, 0x62, 0x5f,
++      0x1f, 0xc1, 0x9e, 0x09, 0xbf, 0xda, 0x32, 0xe1, 0x41, 0xc7, 0x9d, 0x0f,
++      0xc3, 0xbb, 0xaa, 0x97, 0x7c, 0xc9, 0x75, 0xf9, 0xfd, 0x2e, 0xf6, 0x67,
++      0xc2, 0x5f, 0x19, 0xa2, 0x4b, 0xc8, 0xdb, 0x2a, 0x1d, 0x43, 0xc7, 0x3d,
++      0x6a, 0x87, 0xf9, 0x37, 0xd6, 0x55, 0x7b, 0xcf, 0x47, 0xae, 0x55, 0xc8,
++      0x59, 0x00, 0x3e, 0x23, 0x39, 0xa7, 0x0f, 0x13, 0x8c, 0xed, 0xbb, 0xec,
++      0xf7, 0x8f, 0x97, 0x39, 0x32, 0xa5, 0xd9, 0xb7, 0xb6, 0xd3, 0x7e, 0xf2,
++      0x4c, 0x6b, 0xf1, 0xda, 0x7a, 0x9f, 0x73, 0xde, 0x40, 0x7c, 0xa1, 0x0f,
++      0xcb, 0x68, 0x84, 0xfa, 0xb8, 0x5d, 0xa7, 0x50, 0x9f, 0x67, 0x42, 0x5d,
++      0xe2, 0xf0, 0xfb, 0x80, 0x39, 0xcf, 0x9e, 0x53, 0x67, 0xde, 0xa4, 0xee,
++      0x16, 0xcb, 0xfb, 0x55, 0xbe, 0xdf, 0x7e, 0x5f, 0xf2, 0x2d, 0xb1, 0x66,
++      0x50, 0x30, 0xe7, 0x17, 0xdd, 0xff, 0x5d, 0xc8, 0x3d, 0x8f, 0xfe, 0xa7,
++      0x8c, 0xe3, 0x78, 0x77, 0xa5, 0x4b, 0xfc, 0xe7, 0x4f, 0x71, 0xdf, 0xf4,
++      0x30, 0xef, 0x0b, 0xfd, 0x83, 0xec, 0x25, 0x3c, 0xaa, 0x93, 0xf9, 0x67,
++      0xef, 0x71, 0xd7, 0xed, 0x65, 0xf8, 0x4b, 0xab, 0x7c, 0xf1, 0x10, 0xea,
++      0x93, 0x23, 0x7c, 0x5e, 0xa1, 0x9d, 0xb8, 0xf1, 0x31, 0x63, 0x03, 0x3a,
++      0x6a, 0x24, 0x07, 0x3c, 0x6b, 0xf5, 0xf5, 0x88, 0x0e, 0x15, 0x36, 0xf2,
++      0xfa, 0x73, 0xb4, 0xef, 0x93, 0x86, 0x07, 0xf5, 0x8b, 0x64, 0xd6, 0xa7,
++      0x8d, 0xa7, 0xf1, 0x75, 0x9f, 0xb3, 0xf7, 0x95, 0xb5, 0xaa, 0x75, 0x7d,
++      0xe0, 0x0e, 0x57, 0xfd, 0xf8, 0x1b, 0xf4, 0xa7, 0xb6, 0x55, 0x37, 0xde,
++      0x2b, 0xe9, 0xc4, 0x40, 0x64, 0xd5, 0x33, 0x16, 0x6e, 0x1a, 0x46, 0x68,
++      0xd5, 0x8d, 0xf6, 0x2f, 0xf1, 0x7d, 0x90, 0x31, 0x88, 0x6c, 0x75, 0x4a,
++      0xe6, 0x3f, 0x71, 0xd2, 0x39, 0x88, 0x3f, 0x2c, 0x8c, 0xe0, 0xc0, 0x44,
++      0x11, 0x5b, 0xd3, 0xb7, 0xf5, 0x55, 0xd7, 0x65, 0x7b, 0x60, 0x22, 0xde,
++      0x5b, 0x55, 0x94, 0x6d, 0x1f, 0xfb, 0x8c, 0x4a, 0xe6, 0xd8, 0xfb, 0xa9,
++      0xd3, 0x01, 0x5b, 0xa7, 0x3d, 0x30, 0xf2, 0xd7, 0xe9, 0xf6, 0x93, 0xae,
++      0x3f, 0x25, 0x7a, 0x93, 0xfd, 0xb6, 0x83, 0xd8, 0x4b, 0xba, 0xbb, 0x6f,
++      0xa0, 0xdb, 0x67, 0x5c, 0xa7, 0xbb, 0x6b, 0x22, 0x7e, 0xda, 0x55, 0xa4,
++      0xfb, 0xed, 0xe9, 0x12, 0x8d, 0x2c, 0xb6, 0xad, 0xca, 0x22, 0xbf, 0x6e,
++      0x9f, 0xb5, 0xcf, 0xd6, 0xc7, 0x59, 0xfb, 0xfa, 0xc6, 0x7a, 0x89, 0x07,
++      0xfe, 0x9a, 0xd2, 0xed, 0xbd, 0x7d, 0x07, 0x7b, 0xdd, 0x18, 0x1f, 0xda,
++      0x9b, 0x5b, 0xdc, 0x69, 0xc6, 0x76, 0xd8, 0xb7, 0xf9, 0x73, 0x33, 0x8d,
++      0x0e, 0xf6, 0x61, 0x9b, 0xcc, 0x2e, 0x7f, 0xa7, 0xe9, 0x23, 0xee, 0xaa,
++      0x54, 0x1b, 0x27, 0x64, 0xb6, 0x21, 0xb1, 0x5c, 0xc4, 0xc2, 0x05, 0xe9,
++      0xf7, 0x76, 0xb2, 0x4f, 0x58, 0x46, 0xfb, 0xf6, 0xe2, 0x48, 0xa1, 0x57,
++      0xa5, 0xc3, 0x5c, 0xc7, 0x94, 0xba, 0x02, 0xd6, 0xbc, 0x6e, 0x54, 0xd2,
++      0x97, 0xc2, 0xa9, 0x81, 0xd4, 0xc9, 0x7a, 0x0b, 0xc4, 0x28, 0xbe, 0x45,
++      0xa9, 0x6c, 0x6a, 0x7b, 0xbd, 0x1b, 0xc7, 0x6c, 0xfc, 0xa5, 0x4d, 0xf1,
++      0x33, 0x2e, 0x31, 0x73, 0xc7, 0x84, 0xd4, 0x31, 0x42, 0x48, 0x7d, 0x08,
++      0xff, 0x90, 0x9c, 0x1f, 0xa8, 0x41, 0xfa, 0xde, 0x1a, 0x48, 0x5f, 0x71,
++      0x04, 0x3f, 0xd2, 0x23, 0xbe, 0x4c, 0xc1, 0xa3, 0xb6, 0x98, 0x33, 0xfe,
++      0xad, 0x66, 0x10, 0x01, 0xf6, 0x65, 0x5d, 0xee, 0x18, 0xfb, 0x0c, 0xd1,
++      0x63, 0x67, 0xeb, 0xb2, 0x7c, 0xc6, 0xdf, 0x6e, 0x3a, 0xb9, 0xf0, 0x96,
++      0x29, 0x9f, 0xbf, 0x63, 0x32, 0x16, 0x39, 0x62, 0x63, 0xb1, 0xae, 0xd6,
++      0x58, 0xde, 0xb2, 0x5e, 0x31, 0xe6, 0xaf, 0x96, 0x3b, 0x3d, 0x48, 0x6b,
++      0x22, 0xdf, 0x84, 0xbb, 0x89, 0x9f, 0xda, 0x26, 0x9b, 0x60, 0x4c, 0x02,
++      0x27, 0x8e, 0x47, 0xb0, 0x72, 0x42, 0x3b, 0x3d, 0xe8, 0xce, 0x60, 0x7c,
++      0xb6, 0x13, 0x13, 0x05, 0xff, 0x42, 0xd4, 0x45, 0x5c, 0x9d, 0x74, 0xe1,
++      0x76, 0x63, 0xb5, 0x9a, 0xb7, 0x63, 0x5a, 0xe1, 0x2e, 0x63, 0xbb, 0xea,
++      0xb5, 0x31, 0xc5, 0x0c, 0xb1, 0x88, 0xc2, 0x4d, 0xce, 0x5c, 0xbe, 0x35,
++      0x49, 0xcc, 0x7d, 0xfb, 0x84, 0xd4, 0x77, 0x0b, 0xaf, 0x26, 0xa9, 0x97,
++      0x64, 0x36, 0xe3, 0x65, 0x0f, 0xb4, 0x4f, 0x69, 0xdd, 0x86, 0x72, 0x30,
++      0xde, 0xad, 0x33, 0x0e, 0x2e, 0x5c, 0x36, 0xd3, 0xec, 0x97, 0x1c, 0xd4,
++      0x6e, 0x68, 0x11, 0x8f, 0x2b, 0x84, 0x01, 0x9b, 0x46, 0x6f, 0xab, 0x31,
++      0x53, 0x86, 0xa5, 0x7a, 0x0f, 0x4e, 0xdb, 0x32, 0xf4, 0xb7, 0xae, 0x27,
++      0xbe, 0x7e, 0xdc, 0xcc, 0xb0, 0x07, 0x96, 0xfd, 0xd0, 0x58, 0xa2, 0xc5,
++      0xdd, 0x46, 0x0c, 0x1b, 0x8b, 0x2e, 0xa8, 0xb4, 0xca, 0x7a, 0x1a, 0xd3,
++      0x33, 0x60, 0x45, 0xa9, 0x71, 0xea, 0x9b, 0xc8, 0x18, 0x27, 0xce, 0x6a,
++      0x3b, 0xee, 0x5f, 0x48, 0xc3, 0x99, 0xdf, 0x6c, 0x32, 0xfe, 0x37, 0x2e,
++      0x85, 0xb5, 0x23, 0x69, 0xf2, 0xdd, 0xc1, 0xbc, 0x3b, 0xdf, 0xe3, 0xe1,
++      0x7d, 0x99, 0xdb, 0x75, 0xb7, 0x8e, 0xe6, 0x30, 0xef, 0x4e, 0x49, 0x5f,
++      0x85, 0x60, 0x77, 0x01, 0x32, 0x43, 0x62, 0x6f, 0xf1, 0xa9, 0x55, 0xda,
++      0x3b, 0xea, 0x9a, 0x74, 0xf6, 0xc5, 0x72, 0xb3, 0x9e, 0xe0, 0x56, 0xb3,
++      0x19, 0xc7, 0x0a, 0x9e, 0x1b, 0x68, 0xc7, 0x8f, 0xdc, 0xe2, 0x72, 0x21,
++      0xbe, 0xea, 0x2e, 0x55, 0xdc, 0x5b, 0x62, 0x9e, 0xc8, 0xd8, 0x35, 0xb1,
++      0x8c, 0x72, 0x5e, 0x38, 0x29, 0x6b, 0x7c, 0xab, 0x75, 0xf4, 0xa4, 0xd4,
++      0xc8, 0xee, 0xd6, 0x88, 0xa9, 0x75, 0x4b, 0x1f, 0x58, 0x4d, 0x3d, 0x7d,
++      0x34, 0x26, 0x35, 0x78, 0x3f, 0x6b, 0xb0, 0xb6, 0xd0, 0xae, 0xa4, 0x8e,
++      0x69, 0x09, 0xbf, 0xdb, 0x85, 0x2b, 0x0d, 0x5a, 0xe6, 0x79, 0x68, 0xbd,
++      0xce, 0xbc, 0x70, 0x67, 0x6b, 0x63, 0x11, 0x0f, 0xdf, 0x3a, 0xd3, 0x27,
++      0xe7, 0x49, 0x6c, 0x1d, 0x37, 0xe5, 0x05, 0x1b, 0x5b, 0xd6, 0x4b, 0xc9,
++      0x2e, 0xe2, 0x06, 0xc1, 0xc6, 0x72, 0xfd, 0x81, 0xd6, 0x86, 0x29, 0x1f,
++      0x79, 0x53, 0x78, 0x8f, 0x75, 0xe9, 0x48, 0xa1, 0xc4, 0xa3, 0x83, 0x9b,
++      0x37, 0x13, 0x37, 0xbb, 0x53, 0x5a, 0xcb, 0x06, 0xe2, 0x66, 0x9d, 0x3d,
++      0x84, 0x07, 0x3d, 0x78, 0xcc, 0x74, 0xfa, 0x08, 0xc1, 0xce, 0xd6, 0x49,
++      0x2d, 0x2d, 0xb8, 0xf9, 0xea, 0x6a, 0x60, 0x07, 0x71, 0xf3, 0x42, 0xce,
++      0x83, 0x0c, 0x71, 0xf3, 0x47, 0x39, 0x1f, 0xee, 0x20, 0x6e, 0xbe, 0x42,
++      0x8c, 0x75, 0x3e, 0xf9, 0x4b, 0x7c, 0xbb, 0x38, 0x13, 0xdb, 0x95, 0xf0,
++      0xd1, 0xb7, 0x05, 0x3b, 0xff, 0xa6, 0x88, 0x9d, 0xff, 0xcb, 0x3f, 0xc3,
++      0xce, 0x77, 0x13, 0x13, 0x76, 0x4d, 0xc8, 0xfe, 0xd1, 0xae, 0xd6, 0xd7,
++      0x4f, 0xc9, 0x99, 0x95, 0x5b, 0xf1, 0xee, 0xc9, 0xe1, 0x7e, 0x62, 0x65,
++      0x8c, 0x24, 0x33, 0xc8, 0x4d, 0x62, 0x09, 0x71, 0xc1, 0x4b, 0x6e, 0xae,
++      0xbb, 0x32, 0xa9, 0x19, 0x6f, 0xa8, 0x78, 0x67, 0x06, 0x71, 0xf6, 0xca,
++      0xda, 0x02, 0x4d, 0x98, 0xf6, 0xa4, 0x88, 0x8d, 0x59, 0x03, 0x97, 0x12,
++      0x3b, 0x57, 0xcd, 0x01, 0xb5, 0x73, 0x0e, 0x76, 0x96, 0x79, 0x58, 0x55,
++      0x1c, 0x7f, 0x46, 0xec, 0xcc, 0xfe, 0x96, 0xa1, 0x36, 0xd7, 0xc4, 0x18,
++      0x55, 0x38, 0x1c, 0x0f, 0xa0, 0xeb, 0x38, 0x71, 0x8f, 0x3d, 0x0f, 0xb3,
++      0x86, 0x7e, 0x6a, 0x64, 0x70, 0x74, 0xd6, 0x99, 0x87, 0x6d, 0x22, 0x7e,
++      0xf3, 0xc4, 0xc3, 0x28, 0x9f, 0xf3, 0xe0, 0x19, 0xe2, 0xe7, 0x8d, 0xb4,
++      0xf3, 0x19, 0xe2, 0xe7, 0xbb, 0x6f, 0x98, 0x89, 0x4d, 0xcd, 0xe1, 0x15,
++      0x62, 0xf9, 0xba, 0x5a, 0xc4, 0x65, 0xde, 0x61, 0x5d, 0x59, 0x13, 0xc0,
++      0x39, 0x1b, 0x3f, 0xfb, 0x17, 0xb2, 0xca, 0x91, 0xad, 0x8c, 0xb6, 0x10,
++      0xbb, 0xba, 0x68, 0xd7, 0xb6, 0x93, 0x5a, 0xe7, 0x8b, 0xd4, 0x45, 0x63,
++      0xfc, 0xbc, 0x6d, 0x8f, 0xbe, 0xa4, 0xcc, 0x4e, 0x3a, 0x5b, 0xe5, 0x5c,
++      0x55, 0x05, 0xed, 0xbd, 0x65, 0x2c, 0x96, 0xfe, 0x00, 0x4e, 0x4c, 0x26,
++      0xf2, 0x65, 0xc5, 0x7a, 0x28, 0xf7, 0xfa, 0x79, 0x2f, 0x8d, 0xce, 0x35,
++      0x8e, 0x7f, 0x27, 0xf2, 0xc7, 0x88, 0x5d, 0x65, 0xcf, 0x34, 0x14, 0xdc,
++      0x64, 0x76, 0x62, 0xdc, 0x8c, 0xa2, 0xfc, 0x5c, 0x71, 0xef, 0xf5, 0x9c,
++      0x9c, 0xc5, 0xdb, 0xd9, 0x1a, 0xfa, 0x5e, 0x09, 0x13, 0xa6, 0x89, 0xef,
++      0xc2, 0xbe, 0xdb, 0x0b, 0x82, 0x17, 0xbb, 0x71, 0xd4, 0xd4, 0x22, 0x3f,
++      0x67, 0x4c, 0xdc, 0x2b, 0xfb, 0xee, 0x37, 0xcc, 0x9e, 0x1e, 0xe4, 0x3d,
++      0xf3, 0x73, 0xb3, 0xa7, 0xc1, 0x09, 0xfc, 0xc6, 0xdd, 0x5c, 0x0e, 0xd7,
++      0x4a, 0x2f, 0x31, 0xbd, 0x16, 0x19, 0xc1, 0x23, 0xc4, 0x1c, 0xbf, 0x56,
++      0x01, 0xdd, 0xd3, 0xdf, 0xe4, 0xd6, 0x22, 0x33, 0x2a, 0xc0, 0x77, 0x77,
++      0x32, 0xbf, 0xed, 0xa4, 0x6f, 0xc4, 0x16, 0x2a, 0x94, 0x1b, 0x97, 0xbe,
++      0x6c, 0xe3, 0x51, 0x7f, 0x37, 0xaf, 0x8d, 0x17, 0x4a, 0xb8, 0xa6, 0x47,
++      0x78, 0xc5, 0xa6, 0xe3, 0x4e, 0x0e, 0xd1, 0xf3, 0xfe, 0x85, 0x4b, 0x70,
++      0x64, 0xab, 0xa4, 0xac, 0xf7, 0x8f, 0x85, 0xac, 0xde, 0xc5, 0x12, 0xc3,
++      0x3a, 0xb6, 0x99, 0xe2, 0x5f, 0x7d, 0xe4, 0xb3, 0x07, 0x87, 0xcc, 0xa5,
++      0xec, 0xdd, 0x64, 0x0e, 0xda, 0x44, 0x6c, 0xdd, 0xcd, 0x1a, 0x6c, 0x59,
++      0x83, 0x46, 0xd6, 0x6a, 0x5a, 0xab, 0x1b, 0x79, 0x35, 0x5f, 0x13, 0x21,
++      0xbe, 0x59, 0xc5, 0xda, 0xdd, 0x56, 0x68, 0xc2, 0x1b, 0x67, 0x74, 0xfa,
++      0x66, 0x3b, 0xf1, 0x7b, 0x37, 0xee, 0xa1, 0x3c, 0xdf, 0x2e, 0x7c, 0x07,
++      0xe9, 0x6f, 0x78, 0x70, 0xe4, 0x78, 0x1a, 0xeb, 0x57, 0x0d, 0xe1, 0xd2,
++      0x37, 0x7d, 0xcc, 0x55, 0x01, 0x3c, 0x7e, 0x5c, 0xf2, 0x6b, 0x09, 0x6f,
++      0xdf, 0x88, 0x45, 0x7c, 0x88, 0xda, 0x38, 0xe4, 0x8b, 0xef, 0x39, 0x18,
++      0xc5, 0xcf, 0xfe, 0xb7, 0xf4, 0x3e, 0xf3, 0xd0, 0xaa, 0x7f, 0x86, 0x67,
++      0x88, 0x5b, 0x88, 0x05, 0x2a, 0x12, 0xf6, 0xb9, 0xb7, 0x12, 0xde, 0xf5,
++      0xd0, 0x07, 0x24, 0xa6, 0x97, 0x32, 0xd6, 0x2d, 0x62, 0xe7, 0x85, 0xe2,
++      0x5c, 0xf2, 0xed, 0x93, 0xda, 0xc5, 0x43, 0x88, 0x11, 0x43, 0xa3, 0x4f,
++      0xb0, 0x9b, 0x9b, 0x78, 0xf7, 0x4a, 0x3c, 0x6e, 0x9c, 0x23, 0xde, 0x1d,
++      0xa6, 0xad, 0x3d, 0xba, 0xf8, 0x66, 0x08, 0x65, 0x73, 0x11, 0xfa, 0xa4,
++      0xcc, 0x25, 0x5f, 0xf1, 0x3b, 0x73, 0x49, 0x99, 0x85, 0xcb, 0xb9, 0x10,
++      0x74, 0x94, 0xb1, 0x77, 0x2b, 0x57, 0x59, 0xe6, 0xe4, 0x29, 0xff, 0x0e,
++      0xe6, 0xf7, 0x8c, 0x19, 0x0e, 0xee, 0x28, 0x84, 0xf8, 0xa9, 0x0b, 0x66,
++      0x0a, 0xbf, 0xc7, 0xe7, 0x23, 0xfc, 0x8e, 0x62, 0x22, 0x5f, 0x5b, 0x21,
++      0xcd, 0xc0, 0x44, 0xde, 0xc9, 0x79, 0xd1, 0xfc, 0x5e, 0xbf, 0x60, 0xcd,
++      0xb6, 0xe3, 0xce, 0xdf, 0xfa, 0x0d, 0x7f, 0x7f, 0x1e, 0xf3, 0x7b, 0xc9,
++      0xf7, 0x99, 0x93, 0x3a, 0x3e, 0x3a, 0x69, 0x63, 0xfe, 0x79, 0x62, 0xfe,
++      0x01, 0xaf, 0x5b, 0xb0, 0xe6, 0xaf, 0xac, 0xf3, 0xf1, 0x78, 0xef, 0x34,
++      0xfd, 0xa0, 0x8b, 0x74, 0x5d, 0x7a, 0xd8, 0xe6, 0xd7, 0xe1, 0xd3, 0x99,
++      0xe5, 0x5e, 0x3e, 0x99, 0xc0, 0x3b, 0xd7, 0x67, 0xa7, 0x9f, 0x94, 0xd9,
++      0x33, 0x60, 0x3c, 0xf2, 0xee, 0x5a, 0xf8, 0x5a, 0xd8, 0x6f, 0x7a, 0xf9,
++      0x7c, 0xc4, 0x7e, 0x5e, 0x66, 0xb9, 0x9f, 0x7c, 0x56, 0xc2, 0xd3, 0x1f,
++      0x5d, 0x7f, 0xe7, 0x20, 0x3b, 0x35, 0xdf, 0x79, 0xc6, 0x96, 0xdb, 0x7e,
++      0x4e, 0xe6, 0xad, 0xfe, 0x05, 0xd8, 0xf1, 0xf5, 0xfb, 0x94, 0x49, 0xec,
++      0x7b, 0xc0, 0x72, 0xfc, 0x36, 0x1c, 0xdc, 0xc6, 0x78, 0xf8, 0x2e, 0xed,
++      0xb3, 0xed, 0x5c, 0x5d, 0xf0, 0x2e, 0xb3, 0xd3, 0x96, 0xf9, 0xae, 0x73,
++      0x52, 0x93, 0xe4, 0xfe, 0x1f, 0x54, 0x08, 0x1e, 0x7f, 0x9c, 0x35, 0x6b,
++      0xd8, 0x94, 0xd9, 0x3e, 0x94, 0x27, 0x75, 0x08, 0x9b, 0xc6, 0xa3, 0x78,
++      0xdb, 0xf0, 0x17, 0xcf, 0xb0, 0x48, 0x4c, 0x0e, 0x30, 0x26, 0xc3, 0x18,
++      0x31, 0x63, 0xd1, 0xb7, 0x89, 0x4f, 0xb3, 0x64, 0xf8, 0xe8, 0x84, 0x1b,
++      0x6f, 0x13, 0x33, 0x42, 0x39, 0x67, 0x40, 0x9d, 0x77, 0x4b, 0xbf, 0x57,
++      0x22, 0x5a, 0x13, 0x6b, 0xd9, 0x8b, 0x3a, 0xe4, 0x98, 0xf3, 0xfd, 0xfa,
++      0x8f, 0x71, 0xec, 0x84, 0x0b, 0xf7, 0xb1, 0xef, 0x4b, 0xdf, 0x69, 0xf0,
++      0xef, 0xc6, 0xfe, 0xf7, 0xf1, 0x0f, 0xd6, 0x94, 0x9c, 0xb3, 0x52, 0x72,
++      0x96, 0xe3, 0x13, 0xab, 0x56, 0xd7, 0xe7, 0x9f, 0x87, 0x3e, 0x78, 0x15,
++      0x8d, 0x03, 0x0b, 0xf8, 0xc0, 0x9a, 0xe7, 0xbd, 0xf7, 0x18, 0x3f, 0x2f,
++      0x1a, 0xb1, 0x88, 0x8b, 0xc2, 0xcc, 0x87, 0xdd, 0xb8, 0xd7, 0x90, 0x7d,
++      0x26, 0x6d, 0xe0, 0x69, 0x68, 0xfd, 0x17, 0x94, 0x9c, 0xcd, 0xb9, 0x64,
++      0x65, 0x6b, 0x64, 0x5d, 0x85, 0x95, 0xcb, 0x1b, 0x3b, 0xcb, 0xa0, 0xb5,
++      0x78, 0x95, 0x6e, 0xbc, 0xaf, 0xfe, 0xa7, 0x35, 0x1f, 0xfe, 0xc4, 0x7a,
++      0x47, 0x2f, 0xd1, 0xd5, 0xa2, 0x3e, 0x77, 0x89, 0xb7, 0x3a, 0x1c, 0x33,
++      0x65, 0x7f, 0xee, 0xc7, 0xb8, 0xef, 0x84, 0x07, 0xed, 0xc9, 0x5f, 0x5a,
++      0xd9, 0xb0, 0xd0, 0x0c, 0x56, 0xa2, 0x42, 0xe8, 0x3b, 0x33, 0xeb, 0x17,
++      0x0a, 0x50, 0x1d, 0xa6, 0xe0, 0x65, 0xf1, 0xd3, 0x71, 0x58, 0xa6, 0xcc,
++      0x11, 0x2d, 0xdc, 0x91, 0x1c, 0xc2, 0x7b, 0xc9, 0xf4, 0x1f, 0xf8, 0xa0,
++      0x5d, 0xbc, 0xec, 0xd6, 0xe6, 0x9b, 0xdc, 0x51, 0xe5, 0x6f, 0xd0, 0x07,
++      0x1a, 0xec, 0x7a, 0x93, 0x67, 0xef, 0x14, 0x60, 0x6e, 0x91, 0x1e, 0x73,
++      0x1c, 0x73, 0x63, 0x59, 0x78, 0x88, 0xed, 0x86, 0x9b, 0xb5, 0xcc, 0x53,
++      0x4a, 0x8b, 0xec, 0x53, 0x51, 0x75, 0x8f, 0x3e, 0x88, 0x67, 0x8c, 0x78,
++      0xba, 0x4d, 0xd5, 0xf9, 0x3a, 0x0b, 0x25, 0xda, 0xed, 0xc4, 0x2a, 0xda,
++      0xfc, 0x65, 0x77, 0x39, 0x6a, 0x57, 0xeb, 0x9d, 0xe5, 0x6e, 0x6d, 0xf0,
++      0x6b, 0x8c, 0xaf, 0xcd, 0x85, 0x79, 0xff, 0xfb, 0x71, 0x17, 0x56, 0xd8,
++      0xfb, 0x08, 0xb9, 0xe2, 0x8c, 0x74, 0x1c, 0x5b, 0xc6, 0xac, 0xf5, 0xaf,
++      0x26, 0xb5, 0xc8, 0x53, 0x2a, 0xbb, 0x23, 0x40, 0x4c, 0x73, 0x3f, 0xf4,
++      0xe8, 0x2c, 0xeb, 0x54, 0x7b, 0xc1, 0x85, 0x5b, 0x4e, 0x09, 0xcd, 0x1c,
++      0x69, 0x1e, 0x42, 0xf9, 0x09, 0x6b, 0xfd, 0x0e, 0x43, 0x1b, 0xbc, 0xec,
++      0xce, 0xfe, 0xd7, 0x5a, 0xea, 0xad, 0x43, 0xc9, 0x3e, 0xda, 0x10, 0x71,
++      0xc5, 0x90, 0x9c, 0x87, 0x4b, 0xfc, 0x39, 0x31, 0xc5, 0x1f, 0xd3, 0x57,
++      0xdd, 0xa9, 0x20, 0xf9, 0xd4, 0x12, 0xd3, 0x90, 0xf9, 0x79, 0x14, 0x97,
++      0x8d, 0xac, 0x7f, 0x53, 0x43, 0x82, 0xd8, 0x2c, 0xc2, 0x3a, 0x18, 0xc5,
++      0x51, 0x62, 0xbc, 0x43, 0x6c, 0x09, 0xe7, 0x43, 0x3a, 0xb1, 0x59, 0x37,
++      0x5c, 0x63, 0x01, 0x35, 0x93, 0x8b, 0x19, 0xed, 0xf8, 0xf7, 0x98, 0x8f,
++      0x88, 0x8b, 0x1c, 0x42, 0xe0, 0xc4, 0xdf, 0x59, 0x55, 0xba, 0xde, 0x32,
++      0xa6, 0xb8, 0xee, 0x13, 0x11, 0xea, 0x98, 0xef, 0xc9, 0xb9, 0x15, 0xb3,
++      0x0b, 0xf7, 0x8c, 0x85, 0xf9, 0x7e, 0x15, 0x56, 0x9e, 0x88, 0xe2, 0x4a,
++      0xf2, 0x66, 0xcc, 0xd7, 0x38, 0x18, 0xc8, 0xaf, 0xd3, 0x8f, 0xd8, 0x67,
++      0x65, 0x0b, 0xba, 0xbd, 0x77, 0x74, 0xc8, 0x94, 0xfe, 0xdc, 0xc3, 0xbf,
++      0x03, 0xfc, 0x88, 0x3e, 0xbf, 0x55, 0xc4, 0x3a, 0xfb, 0x5b, 0xa3, 0x33,
++      0x6f, 0x55, 0xd8, 0x7b, 0x9a, 0x88, 0xf2, 0xb9, 0x90, 0x3d, 0x17, 0x1c,
++      0x26, 0xcd, 0xb3, 0xe3, 0xd2, 0xb7, 0xb5, 0xad, 0xf3, 0x15, 0xf7, 0xdf,
++      0xdf, 0x32, 0x5c, 0x58, 0xcf, 0xde, 0x3e, 0xa2, 0x4b, 0xbd, 0x1c, 0xd6,
++      0x6a, 0xb1, 0x0e, 0xa7, 0x43, 0x6c, 0xc2, 0xf5, 0x7f, 0x87, 0x23, 0xa1,
++      0x04, 0x73, 0xbe, 0x8e, 0x77, 0x73, 0x5f, 0x66, 0xbf, 0x53, 0x27, 0x67,
++      0x77, 0x70, 0xcb, 0x09, 0x2f, 0xd7, 0x5c, 0x4f, 0x5c, 0xb3, 0x09, 0x3f,
++      0x0b, 0x39, 0xbd, 0xc6, 0x61, 0x5e, 0x1f, 0x9d, 0x0e, 0x10, 0x8b, 0xfa,
++      0xf8, 0xb9, 0x91, 0xb7, 0x2f, 0xe2, 0x49, 0x64, 0xf9, 0xd7, 0x78, 0xf2,
++      0x11, 0x0f, 0xe8, 0xb8, 0x9a, 0x7b, 0x09, 0x57, 0x48, 0x3b, 0x3b, 0xed,
++      0xd0, 0x3c, 0x5e, 0x10, 0xba, 0xb2, 0x5e, 0x6c, 0xb0, 0xd6, 0x2d, 0xf4,
++      0x03, 0x72, 0x8e, 0xf7, 0xdf, 0xb8, 0x06, 0x91, 0xdd, 0x09, 0xf6, 0xc7,
++      0x46, 0x03, 0xda, 0x43, 0xb4, 0x97, 0x29, 0x6b, 0x68, 0xec, 0x45, 0xe5,
++      0xdd, 0x08, 0x56, 0x8c, 0x59, 0x43, 0x91, 0x94, 0x5c, 0xb7, 0xac, 0xea,
++      0xb5, 0x7a, 0xe4, 0x0d, 0xe5, 0x61, 0xad, 0xf3, 0x50, 0x07, 0xa3, 0x38,
++      0x9b, 0x6b, 0xbc, 0xf8, 0x1e, 0xb1, 0x53, 0x94, 0xbd, 0xde, 0x25, 0xf7,
++      0x28, 0x66, 0x72, 0xff, 0xb1, 0x52, 0x66, 0x04, 0xa3, 0x85, 0x80, 0x9a,
++      0xce, 0xfd, 0x49, 0xa5, 0xe4, 0xa2, 0x11, 0xfa, 0x42, 0xd3, 0x98, 0xf0,
++      0x6a, 0x0d, 0x55, 0x91, 0xce, 0x51, 0xd2, 0x99, 0x5e, 0xa3, 0x67, 0x46,
++      0x94, 0xe8, 0x2c, 0x40, 0x5c, 0xf7, 0xaa, 0xcc, 0xcf, 0xa8, 0xb7, 0xa7,
++      0xf9, 0xbc, 0xe8, 0x2d, 0x8c, 0x9f, 0x15, 0xe9, 0x3c, 0x56, 0xb8, 0x88,
++      0xe9, 0xdc, 0x25, 0xfb, 0xf7, 0x91, 0x42, 0x82, 0xb5, 0xaf, 0x0f, 0x79,
++      0xe6, 0x93, 0xb1, 0x5c, 0x63, 0x66, 0x8c, 0x7c, 0x38, 0x67, 0xee, 0xfa,
++      0xf0, 0x64, 0xf1, 0x99, 0x61, 0xbe, 0x3b, 0x7c, 0xed, 0x77, 0xd1, 0x91,
++      0xb3, 0xaf, 0xef, 0xec, 0x2b, 0x94, 0xd3, 0x76, 0x4e, 0x1f, 0x7e, 0xd8,
++      0xf4, 0xca, 0x0c, 0x1c, 0x2f, 0x8d, 0xaf, 0xc7, 0x88, 0xf1, 0x97, 0xd8,
++      0x45, 0xb9, 0x47, 0xa9, 0xcf, 0x13, 0xa6, 0xbd, 0x7f, 0x2f, 0xe7, 0xba,
++      0x98, 0xab, 0xbb, 0x5a, 0xcf, 0x10, 0x8b, 0x1d, 0x63, 0xcc, 0xec, 0x49,
++      0x36, 0x76, 0xbf, 0x4c, 0xbf, 0x4b, 0x7f, 0x5d, 0xf6, 0xc8, 0x81, 0xb1,
++      0x89, 0x6f, 0x63, 0xaa, 0xa6, 0x71, 0xe1, 0x59, 0xe6, 0x84, 0xd3, 0xcc,
++      0x53, 0x1e, 0xe6, 0x84, 0xea, 0x09, 0x62, 0x48, 0xe6, 0xa9, 0x79, 0xe6,
++      0x29, 0x8f, 0xde, 0x78, 0x71, 0x06, 0xff, 0x9d, 0x7a, 0x11, 0xfe, 0x62,
++      0x89, 0x19, 0xc8, 0xb3, 0xce, 0xfc, 0x55, 0x9f, 0xe9, 0xc7, 0xa5, 0x9b,
++      0x9d, 0x19, 0x9a, 0x9b, 0x35, 0x7b, 0x77, 0xae, 0x31, 0x34, 0x22, 0xb4,
++      0x7b, 0xb4, 0x48, 0x96, 0xb6, 0x3a, 0x62, 0x63, 0xef, 0x6e, 0xf6, 0x0b,
++      0x72, 0x8e, 0xab, 0x0a, 0x1e, 0xfa, 0xfe, 0x88, 0x21, 0xe7, 0x1b, 0x22,
++      0xc1, 0xcd, 0xb4, 0xe1, 0x88, 0xd9, 0xd8, 0x12, 0x53, 0x3b, 0x70, 0xa9,
++      0x98, 0x63, 0x1d, 0x2c, 0xad, 0x65, 0x8e, 0xa2, 0xb1, 0xfb, 0x7e, 0x7c,
++      0x03, 0xe9, 0x9a, 0xc6, 0xde, 0x71, 0xc4, 0x8c, 0x7b, 0x21, 0xe7, 0x41,
++      0x1d, 0x5a, 0xf5, 0x79, 0x37, 0xf1, 0xc8, 0x27, 0xd6, 0x52, 0xfd, 0x31,
++      0x8c, 0x13, 0x33, 0x36, 0xac, 0xd2, 0x2f, 0x7e, 0xbf, 0x78, 0xcf, 0xd9,
++      0x2b, 0x12, 0x7f, 0xf1, 0x51, 0x07, 0xe5, 0xf0, 0x2c, 0xaa, 0xe3, 0x1a,
++      0xd4, 0x85, 0x7d, 0x56, 0xf8, 0x55, 0x1c, 0xa0, 0xbf, 0x8d, 0x17, 0x14,
++      0x8c, 0xfa, 0x57, 0x31, 0x20, 0xb5, 0x89, 0xef, 0xb4, 0xe5, 0x02, 0xc4,
++      0x29, 0x11, 0x94, 0xeb, 0xb1, 0xe8, 0x30, 0xe5, 0x6b, 0x63, 0x2e, 0x1f,
++      0x65, 0x0e, 0xc9, 0x86, 0x02, 0xf6, 0xf9, 0xd5, 0x72, 0x3d, 0x62, 0xff,
++      0xcf, 0x81, 0xf4, 0x41, 0x0d, 0x53, 0xb2, 0x4f, 0x7d, 0x08, 0xaf, 0x8e,
++      0xcf, 0xe3, 0x58, 0x32, 0x8d, 0xbd, 0x35, 0x21, 0x8c, 0x99, 0x8b, 0xed,
++      0xb9, 0x81, 0xf4, 0x5b, 0x5b, 0x26, 0x0e, 0xda, 0xb3, 0xc8, 0x8d, 0x49,
++      0x57, 0xbd, 0x9c, 0xe3, 0x98, 0x66, 0xdf, 0x35, 0x6e, 0x0c, 0xe1, 0x80,
++      0xf1, 0xc7, 0x30, 0x16, 0x49, 0xee, 0x1c, 0xc1, 0xf9, 0x29, 0xa9, 0x61,
++      0xfd, 0xad, 0xcb, 0xc6, 0x44, 0x3f, 0x2e, 0x62, 0x5e, 0x1f, 0x9a, 0x6c,
++      0x0c, 0x37, 0xd7, 0xba, 0x7c, 0xca, 0xc1, 0x72, 0x4d, 0x79, 0x39, 0x73,
++      0x5d, 0x85, 0x20, 0xf5, 0x75, 0x21, 0xe9, 0x65, 0xce, 0x11, 0x7d, 0xca,
++      0x19, 0x3f, 0x47, 0xce, 0x44, 0x5e, 0x61, 0xa4, 0xf9, 0xc6, 0xfd, 0x15,
++      0xf9, 0xff, 0x83, 0x6b, 0xe7, 0x0e, 0x8b, 0xb3, 0xf1, 0x3f, 0xb7, 0x2e,
++      0xdd, 0x24, 0x72, 0x27, 0x03, 0xcc, 0xe9, 0xd1, 0xa9, 0x6b, 0xfa, 0x15,
++      0x9d, 0x9e, 0x93, 0x9a, 0x61, 0xeb, 0xdc, 0x99, 0xb7, 0x69, 0x03, 0xef,
++      0xa8, 0x46, 0xd6, 0x13, 0xfa, 0x55, 0x0d, 0xfd, 0xad, 0x09, 0xbd, 0x4b,
++      0x53, 0x9e, 0x9e, 0xab, 0xe6, 0x7a, 0xb4, 0xac, 0x7e, 0xd7, 0xc2, 0xcd,
++      0x6d, 0x70, 0xeb, 0x72, 0x7d, 0xca, 0x4a, 0x87, 0xe4, 0x77, 0x33, 0x20,
++      0xb5, 0xfc, 0x05, 0x73, 0xde, 0x5a, 0xbe, 0xd8, 0xc1, 0x86, 0x7f, 0x97,
++      0x93, 0xbd, 0xaf, 0xac, 0xc5, 0x5e, 0xfb, 0xe2, 0xdb, 0xee, 0x83, 0xf8,
++      0xdb, 0xfc, 0x21, 0xbc, 0x39, 0xee, 0x21, 0xce, 0x14, 0x59, 0xd6, 0xa3,
++      0x7a, 0x75, 0x3c, 0xfd, 0x2e, 0xf3, 0xe2, 0xc5, 0xa9, 0x92, 0x5f, 0xcc,
++      0xb5, 0xae, 0x98, 0x52, 0xa4, 0x55, 0x85, 0x32, 0xca, 0xf9, 0x53, 0xc3,
++      0x8d, 0x68, 0x11, 0xdb, 0xba, 0xc9, 0xe7, 0xee, 0x9c, 0x83, 0x79, 0x63,
++      0xf9, 0xc3, 0x01, 0x67, 0xfe, 0x15, 0x60, 0x1e, 0x1d, 0xc5, 0x91, 0x5c,
++      0x63, 0xe2, 0x3d, 0x39, 0xa7, 0xc3, 0x5e, 0xec, 0x12, 0x46, 0x71, 0x22,
++      0x57, 0xca, 0xa1, 0x11, 0x39, 0xdf, 0x9a, 0x88, 0xba, 0x9c, 0x1c, 0x19,
++      0x75, 0x69, 0xd9, 0xa8, 0xeb, 0xe6, 0x80, 0x60, 0x83, 0xe1, 0x42, 0x2c,
++      0x52, 0x0e, 0x37, 0xf6, 0x18, 0x8e, 0x7f, 0xd4, 0xcf, 0x78, 0x11, 0x5d,
++      0x24, 0x75, 0x59, 0x6a, 0xb2, 0x87, 0x35, 0x79, 0x31, 0xd2, 0x8b, 0x3d,
++      0x78, 0x4d, 0x17, 0x7d, 0xec, 0x2f, 0xe9, 0xc3, 0x38, 0x87, 0xfd, 0xd6,
++      0x7c, 0xb7, 0xf8, 0x92, 0x17, 0x87, 0x9a, 0xa6, 0xad, 0xa9, 0xb0, 0xc8,
++      0xee, 0xc6, 0x69, 0xe6, 0x57, 0xdc, 0x1c, 0x8b, 0x9c, 0x66, 0xcd, 0x1e,
++      0xd1, 0x4b, 0x3e, 0x7e, 0x57, 0x91, 0x4f, 0x3d, 0x33, 0x8b, 0x3f, 0xe1,
++      0xef, 0xf5, 0x91, 0xbd, 0xca, 0x59, 0x6f, 0xf9, 0xcc, 0xdb, 0x81, 0xd2,
++      0xec, 0x54, 0x9e, 0x8d, 0xe6, 0x09, 0x3a, 0x2b, 0x84, 0x56, 0x80, 0xfe,
++      0x59, 0x8e, 0xde, 0xb0, 0x9c, 0xf3, 0x10, 0xbd, 0xc8, 0x9e, 0x22, 0xa8,
++      0x0f, 0x0b, 0x2f, 0x51, 0x1f, 0x87, 0xae, 0x9d, 0xa9, 0x72, 0xf2, 0x57,
++      0x05, 0xaf, 0x6f, 0x4e, 0xbe, 0xb8, 0xce, 0x8f, 0xdf, 0x58, 0x97, 0xc2,
++      0x11, 0xe6, 0x04, 0xb1, 0x69, 0xc6, 0xc6, 0x91, 0x6e, 0xe2, 0x93, 0xdd,
++      0xf6, 0xf9, 0x11, 0xc6, 0x81, 0x79, 0x4d, 0x8e, 0xf9, 0x3e, 0xe2, 0xec,
++      0xb9, 0x9c, 0x7d, 0x66, 0xaf, 0xf7, 0x0d, 0x15, 0x63, 0xae, 0xf9, 0x12,
++      0x7a, 0x6b, 0x85, 0x5e, 0x28, 0xb8, 0x6d, 0x32, 0x41, 0x1d, 0xd4, 0x09,
++      0x5d, 0xeb, 0x29, 0x76, 0x73, 0x87, 0xc6, 0x84, 0x3e, 0x30, 0x32, 0x16,
++      0xeb, 0xff, 0x29, 0xb0, 0xae, 0x0a, 0xda, 0xe0, 0x6c, 0xf1, 0xff, 0x38,
++      0x7e, 0xa1, 0x84, 0x96, 0xd0, 0xf1, 0xc0, 0x64, 0x8e, 0x3b, 0x3e, 0x57,
++      0x41, 0xdd, 0x69, 0xdd, 0x3f, 0x50, 0x15, 0x78, 0xec, 0x89, 0x04, 0x79,
++      0x5f, 0x14, 0xdc, 0x3c, 0xe9, 0x83, 0xff, 0x4c, 0x15, 0x6b, 0xae, 0x0f,
++      0x97, 0x9b, 0x69, 0xd7, 0x27, 0x4a, 0xbc, 0xdb, 0x7b, 0xa3, 0x78, 0x74,
++      0x22, 0x0a, 0x93, 0x3e, 0x3b, 0x67, 0xca, 0x3e, 0xb0, 0xcf, 0xce, 0x9f,
++      0x17, 0xd7, 0xd4, 0xd9, 0x7b, 0x54, 0xcf, 0x16, 0xf4, 0xc8, 0x59, 0x55,
++      0x85, 0x0f, 0x4e, 0xcc, 0xdf, 0x5c, 0x0e, 0xeb, 0x85, 0xa5, 0xa9, 0x78,
++      0x66, 0x17, 0x7d, 0x7e, 0xc5, 0xf2, 0x30, 0x7b, 0x19, 0xf6, 0x94, 0x6b,
++      0xa5, 0xff, 0x1d, 0x60, 0xff, 0x5b, 0xda, 0xd3, 0xd7, 0xfb, 0x1f, 0x52,
++      0xd9, 0x4d, 0x41, 0x58, 0x1f, 0x95, 0xa7, 0xac, 0x8f, 0xbd, 0xa9, 0x38,
++      0xdf, 0x97, 0x3d, 0x3d, 0xcb, 0x7a, 0xab, 0xd9, 0xb2, 0xf2, 0xcd, 0xb1,
++      0x4c, 0xc8, 0x1d, 0xc2, 0x99, 0x06, 0xd9, 0x07, 0x74, 0xe1, 0x83, 0xb8,
++      0x1e, 0xd9, 0x05, 0xd9, 0x7b, 0x67, 0x8e, 0x5f, 0x2c, 0xe7, 0x0e, 0xeb,
++      0x82, 0x9d, 0xe6, 0x22, 0x3c, 0x33, 0xbb, 0x16, 0xbd, 0x5e, 0xd8, 0xe7,
++      0x62, 0x2c, 0x03, 0x6f, 0x2c, 0x85, 0xd4, 0xed, 0x78, 0xcb, 0x43, 0x08,
++      0x63, 0xb6, 0x70, 0x08, 0x0f, 0x9e, 0x90, 0xfd, 0xc5, 0x07, 0x5a, 0x7d,
++      0x27, 0xac, 0xbf, 0x8b, 0xa4, 0xe6, 0x99, 0x17, 0x2d, 0xab, 0x62, 0x6d,
++      0x63, 0x84, 0xe5, 0x88, 0x18, 0xa3, 0x57, 0xb0, 0x7b, 0xff, 0x07, 0xa8,
++      0xc1, 0xd9, 0xe9, 0xf4, 0xcd, 0xec, 0x25, 0x3b, 0x9f, 0x54, 0x21, 0x3c,
++      0x4f, 0x19, 0x9f, 0x2e, 0x08, 0x4e, 0x79, 0xb0, 0x75, 0xcb, 0x89, 0x25,
++      0x78, 0x61, 0x36, 0x8c, 0xb3, 0xa6, 0x4e, 0x9c, 0x04, 0x55, 0x99, 0xb2,
++      0xaa, 0xab, 0xc9, 0x6b, 0xa5, 0xdb, 0x8d, 0x4d, 0x49, 0xe9, 0x0f, 0xf5,
++      0xfe, 0x80, 0xc2, 0x92, 0x72, 0xe8, 0x0b, 0xfb, 0x81, 0x01, 0x3f, 0xfb,
++      0xd5, 0x27, 0x55, 0x3c, 0xf3, 0xbe, 0x3b, 0x8c, 0xe7, 0x99, 0x7f, 0x7e,
++      0x50, 0x90, 0x33, 0x53, 0xcc, 0x31, 0xd3, 0x51, 0xda, 0xca, 0x07, 0x57,
++      0x7d, 0x15, 0x0e, 0x33, 0x5e, 0x5e, 0x32, 0xca, 0x98, 0xa3, 0xe4, 0x0c,
++      0x95, 0xe4, 0xf7, 0x9d, 0x72, 0x56, 0xc4, 0x7a, 0x56, 0x77, 0xfa, 0x7d,
++      0x63, 0xe6, 0xc6, 0x73, 0xc8, 0x21, 0xe6, 0xf5, 0xc6, 0xee, 0x88, 0x7a,
++      0xc5, 0x4a, 0x7f, 0x5d, 0x51, 0xce, 0xdd, 0x55, 0xa8, 0xb0, 0x65, 0xc5,
++      0xf0, 0x44, 0xa9, 0xa6, 0x54, 0x4b, 0x2f, 0xd7, 0x9d, 0x2d, 0xfa, 0x60,
++      0x25, 0x63, 0xfd, 0x28, 0x6b, 0x74, 0xf9, 0x09, 0xa9, 0x25, 0xec, 0x5f,
++      0xd4, 0x7a, 0x62, 0x61, 0xc1, 0x0d, 0x3e, 0xdc, 0x1f, 0xd2, 0x5a, 0xe4,
++      0x2c, 0xf6, 0xd3, 0x85, 0x0e, 0x8f, 0x9c, 0x89, 0x7a, 0xa6, 0x20, 0xb5,
++      0x5c, 0x72, 0x41, 0x69, 0xbd, 0x08, 0x6a, 0xc7, 0xc4, 0x46, 0xdd, 0xad,
++      0x1f, 0x8d, 0x05, 0xe4, 0xdc, 0xfc, 0x90, 0x8b, 0xbd, 0xb6, 0x6f, 0xcc,
++      0xb2, 0xee, 0x6e, 0xd6, 0xfb, 0xd7, 0xbb, 0x65, 0x3f, 0x39, 0xd6, 0x7b,
++      0x4e, 0x69, 0x2d, 0x47, 0xd4, 0x8d, 0x74, 0x9e, 0xab, 0x92, 0x18, 0xc9,
++      0x52, 0xce, 0x47, 0x6d, 0x99, 0xf6, 0x53, 0xa6, 0xd2, 0x99, 0xa1, 0x2a,
++      0x5c, 0x1e, 0x87, 0xce, 0xa8, 0xc5, 0x79, 0x83, 0xc9, 0x29, 0x14, 0x4f,
++      0xb7, 0x43, 0xfc, 0x5f, 0xeb, 0x15, 0x0c, 0x55, 0xc9, 0x9c, 0x3c, 0x3d,
++      0x2e, 0x35, 0x46, 0x09, 0x3e, 0xc9, 0x56, 0xa7, 0x06, 0x70, 0x65, 0x0d,
++      0xf0, 0xca, 0x98, 0xb3, 0xdf, 0x5e, 0x3c, 0xe3, 0x6d, 0x9f, 0x65, 0x78,
++      0xc8, 0x3e, 0xa3, 0x20, 0xf4, 0x0f, 0xe2, 0x4c, 0x4e, 0x30, 0xe5, 0x00,
++      0x31, 0x65, 0x6c, 0x90, 0x78, 0xb3, 0xa5, 0xe0, 0x9c, 0xb7, 0x32, 0x3e,
++      0xa2, 0xcf, 0x3f, 0x49, 0xac, 0x7a, 0x18, 0xce, 0x7e, 0x7b, 0x43, 0xf1,
++      0x0c, 0x42, 0x2c, 0xdf, 0xa9, 0xb6, 0x16, 0xec, 0x33, 0x5a, 0x8c, 0xb1,
++      0x76, 0xb5, 0x79, 0xb6, 0x43, 0x6d, 0x99, 0xed, 0x52, 0x3b, 0x0a, 0xd2,
++      0xb3, 0x3e, 0xd0, 0x7a, 0xff, 0x89, 0xed, 0x6a, 0xeb, 0x74, 0x8f, 0x22,
++      0xa6, 0x0d, 0xf9, 0x52, 0x19, 0xd5, 0x35, 0xeb, 0xcc, 0xcf, 0x3b, 0xd9,
++      0x77, 0x6d, 0x35, 0x4b, 0xfd, 0xbc, 0xfc, 0x1f, 0x57, 0x58, 0xfe, 0x67,
++      0xa2, 0x77, 0xa3, 0xb2, 0xac, 0x5b, 0x93, 0x7f, 0x2d, 0xf6, 0xb0, 0x9e,
++      0x4e, 0xb2, 0x36, 0x9a, 0x55, 0xe8, 0x63, 0xdf, 0x31, 0x6c, 0x2c, 0x2b,
++      0xee, 0x97, 0x89, 0x4c, 0x72, 0x4e, 0x42, 0xfc, 0x15, 0x59, 0xf6, 0x20,
++      0xf8, 0x7b, 0xf2, 0xbf, 0xb7, 0x28, 0x57, 0x97, 0x9c, 0x23, 0xf0, 0x5e,
++      0x3f, 0x47, 0x76, 0x6c, 0xec, 0xba, 0x5c, 0x1e, 0x5e, 0x1b, 0x25, 0x3e,
++      0xdd, 0xab, 0xb4, 0xc1, 0xa7, 0x1c, 0xb9, 0x2e, 0x5e, 0x66, 0x0c, 0x0f,
++      0xdb, 0x31, 0xec, 0xc8, 0xb5, 0xb2, 0x28, 0xd7, 0x8a, 0x7c, 0xa7, 0x7d,
++      0x3e, 0x8b, 0x74, 0x5a, 0xe7, 0xc6, 0xe4, 0x1c, 0x99, 0xcc, 0x2e, 0x45,
++      0x36, 0x91, 0xe3, 0x84, 0x55, 0xa1, 0x77, 0xa9, 0x6d, 0xf6, 0xb9, 0x32,
++      0x39, 0xd3, 0x25, 0xfb, 0xfb, 0x25, 0xb9, 0xa4, 0x8e, 0x2f, 0x0a, 0x76,
++      0x4c, 0xca, 0x39, 0x6b, 0xcb, 0xfa, 0x99, 0x51, 0x11, 0x14, 0x59, 0xce,
++      0x1a, 0x22, 0x8b, 0x9c, 0x17, 0x29, 0xc9, 0xf3, 0xb5, 0xa2, 0x3c, 0x62,
++      0xab, 0xeb, 0x76, 0x2a, 0xfd, 0xff, 0xdf, 0xdb, 0x39, 0xe7, 0x2c, 0x49,
++      0x49, 0x9e, 0x60, 0x4a, 0xf8, 0xcf, 0xb7, 0x8e, 0x8e, 0x0f, 0xe0, 0x15,
++      0xde, 0xff, 0x65, 0xae, 0x24, 0x97, 0x1b, 0x33, 0xd3, 0xa5, 0x33, 0x72,
++      0x6c, 0x29, 0xcd, 0x98, 0x31, 0x42, 0x3f, 0x72, 0xe4, 0x93, 0x33, 0x72,
++      0x8d, 0xf3, 0x97, 0xed, 0xb9, 0x57, 0x3c, 0xcd, 0x7e, 0x19, 0x67, 0x0b,
++      0xbf, 0x6d, 0xbf, 0xa6, 0x7c, 0x05, 0x7b, 0x64, 0xa1, 0x3d, 0x47, 0xda,
++      0x72, 0x96, 0x44, 0xe1, 0xa9, 0x69, 0x60, 0xda, 0xe4, 0xb2, 0xa9, 0x21,
++      0x3c, 0x6e, 0x58, 0xd6, 0x93, 0xcd, 0xba, 0x9c, 0x01, 0xba, 0x50, 0x6b,
++      0xcf, 0x85, 0x60, 0x54, 0xe9, 0xb2, 0x77, 0x27, 0xe7, 0x48, 0x7a, 0xa8,
++      0x03, 0x91, 0x5d, 0x7c, 0xa0, 0x64, 0x7b, 0x39, 0xdf, 0x96, 0xa5, 0x7e,
++      0x44, 0x37, 0xa5, 0x73, 0x6e, 0x32, 0x73, 0xb9, 0x51, 0x27, 0xb7, 0xd9,
++      0x3a, 0x79, 0xda, 0x10, 0x7f, 0x65, 0xf6, 0xa1, 0xaf, 0xce, 0x10, 0x3f,
++      0x8c, 0x18, 0x5e, 0x1b, 0xab, 0x1d, 0x26, 0x3e, 0x39, 0xc2, 0xd8, 0x79,
++      0xd4, 0xbc, 0x88, 0x8b, 0xf9, 0x97, 0xf0, 0xca, 0xb5, 0xff, 0x85, 0x13,
++      0x7f, 0xf1, 0xb5, 0x6c, 0xb1, 0xcf, 0x32, 0xfd, 0x75, 0xcb, 0xb2, 0xb8,
++      0xe4, 0xa1, 0x93, 0x4d, 0x72, 0xb6, 0xa9, 0x3c, 0xf5, 0xde, 0x3a, 0xd9,
++      0xdf, 0x2a, 0x4b, 0x0d, 0x7e, 0xf5, 0x82, 0x2e, 0xba, 0xf9, 0x64, 0xf5,
++      0x19, 0x5d, 0xe4, 0xd2, 0x8d, 0x51, 0xfb, 0x7f, 0x33, 0x43, 0x6b, 0x77,
++      0xeb, 0x12, 0x3b, 0xef, 0x34, 0xb7, 0xd9, 0x39, 0x61, 0x30, 0x75, 0xab,
++      0xad, 0x83, 0x83, 0xa9, 0x65, 0x8e, 0x2e, 0x52, 0x09, 0xfb, 0xfb, 0xe1,
++      0x94, 0xa3, 0x9b, 0x5c, 0xaa, 0xde, 0xfe, 0x1e, 0x4d, 0x39, 0x67, 0xa2,
++      0xb3, 0x29, 0xdd, 0xfe, 0x1e, 0x4f, 0xc5, 0xec, 0xef, 0x23, 0xa9, 0x5b,
++      0xae, 0xf3, 0xc5, 0x9f, 0xff, 0x07, 0xd8, 0xc4, 0xd3, 0xb4, 0xb4, 0x3a,
+       0x00, 0x00, 0x00 };
+ static const u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x0 };
+ static const u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x0 };
+ static struct fw_info bnx2_txp_fw_06 = {
+-      /* Firmware version: 4.6.16 */
++      /* Firmware version: 4.4.2 */
+       .ver_major                      = 0x4,
+-      .ver_minor                      = 0x6,
+-      .ver_fix                        = 0x10,
++      .ver_minor                      = 0x4,
++      .ver_fix                        = 0x2,
+       .start_addr                     = 0x08000098,
+       .text_addr                      = 0x08000000,
+-      .text_len                       = 0x3a74,
++      .text_len                       = 0x3ab0,
+       .text_index                     = 0x0,
+       .gz_text                        = bnx2_TXP_b06FwText,
+       .gz_text_len                    = sizeof(bnx2_TXP_b06FwText),
+@@ -4432,11 +4535,11 @@
+       .data_index                     = 0x0,
+       .data                           = bnx2_TXP_b06FwData,
+-      .sbss_addr                      = 0x08003aa0,
++      .sbss_addr                      = 0x08003ae0,
+       .sbss_len                       = 0x68,
+       .sbss_index                     = 0x0,
+-      .bss_addr                       = 0x08003b08,
++      .bss_addr                       = 0x08003b48,
+       .bss_len                        = 0x14c,
+       .bss_index                      = 0x0,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2.h linux-2.6.29-rc3.owrt/drivers/net/bnx2.h
+--- linux-2.6.29.owrt/drivers/net/bnx2.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2.h   2009-05-10 23:48:28.000000000 +0200
+@@ -1,6 +1,6 @@
+ /* bnx2.h: Broadcom NX2 network driver.
+  *
+- * Copyright (c) 2004-2009 Broadcom Corporation
++ * Copyright (c) 2004-2007 Broadcom Corporation
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2x.h linux-2.6.29-rc3.owrt/drivers/net/bnx2x.h
+--- linux-2.6.29.owrt/drivers/net/bnx2x.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2x.h  2009-05-10 23:48:28.000000000 +0200
+@@ -152,7 +152,7 @@
+ #define PAGES_PER_SGE                 (1 << PAGES_PER_SGE_SHIFT)
+ #define SGE_PAGE_SIZE                 PAGE_SIZE
+ #define SGE_PAGE_SHIFT                        PAGE_SHIFT
+-#define SGE_PAGE_ALIGN(addr)          PAGE_ALIGN((typeof(PAGE_SIZE))addr)
++#define SGE_PAGE_ALIGN(addr)          PAGE_ALIGN(addr)
+ #define BCM_RX_ETH_PAYLOAD_ALIGN      64
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2x_init.h linux-2.6.29-rc3.owrt/drivers/net/bnx2x_init.h
+--- linux-2.6.29.owrt/drivers/net/bnx2x_init.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2x_init.h     2009-05-10 23:48:28.000000000 +0200
+@@ -150,6 +150,7 @@
+ static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+ {
++#ifdef USE_DMAE
+       int offset = 0;
+       if (bp->dmae_ready) {
+@@ -163,6 +164,9 @@
+                                addr + offset, len);
+       } else
+               bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
++#else
++      bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
++#endif
+ }
+ static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bnx2x_main.c linux-2.6.29-rc3.owrt/drivers/net/bnx2x_main.c
+--- linux-2.6.29.owrt/drivers/net/bnx2x_main.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bnx2x_main.c     2009-05-10 23:48:28.000000000 +0200
+@@ -57,7 +57,7 @@
+ #include "bnx2x.h"
+ #include "bnx2x_init.h"
+-#define DRV_MODULE_VERSION    "1.45.27"
++#define DRV_MODULE_VERSION    "1.45.26"
+ #define DRV_MODULE_RELDATE    "2009/01/26"
+ #define BNX2X_BC_VER          0x040200
+@@ -4035,10 +4035,10 @@
+ {
+       int port = BP_PORT(bp);
+-      bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
++      bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+                       USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
+                       sizeof(struct ustorm_status_block)/4);
+-      bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
++      bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+                       CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
+                       sizeof(struct cstorm_status_block)/4);
+ }
+@@ -4092,18 +4092,18 @@
+ {
+       int func = BP_FUNC(bp);
+-      bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR +
+-                      TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+-                      sizeof(struct tstorm_def_status_block)/4);
+-      bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
++      bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+                       USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+                       sizeof(struct ustorm_def_status_block)/4);
+-      bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
++      bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+                       CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+                       sizeof(struct cstorm_def_status_block)/4);
+-      bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR +
++      bnx2x_init_fill(bp, BAR_XSTRORM_INTMEM +
+                       XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+                       sizeof(struct xstorm_def_status_block)/4);
++      bnx2x_init_fill(bp, BAR_TSTRORM_INTMEM +
++                      TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
++                      sizeof(struct tstorm_def_status_block)/4);
+ }
+ static void bnx2x_init_def_sb(struct bnx2x *bp,
+@@ -4518,8 +4518,7 @@
+                               (USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA |
+                                USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING);
+                       context->ustorm_st_context.common.sge_buff_size =
+-                              (u16)min((u32)SGE_PAGE_SIZE*PAGES_PER_SGE,
+-                                       (u32)0xffff);
++                                      (u16)(BCM_PAGE_SIZE*PAGES_PER_SGE);
+                       context->ustorm_st_context.common.sge_page_base_hi =
+                                               U64_HI(fp->rx_sge_mapping);
+                       context->ustorm_st_context.common.sge_page_base_lo =
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/bonding/bond_main.c linux-2.6.29-rc3.owrt/drivers/net/bonding/bond_main.c
+--- linux-2.6.29.owrt/drivers/net/bonding/bond_main.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/bonding/bond_main.c      2009-05-10 23:48:28.000000000 +0200
+@@ -3537,26 +3537,11 @@
+               }
+               break;
+       case NETDEV_CHANGE:
+-              if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
+-                      struct slave *slave;
+-
+-                      slave = bond_get_slave_by_dev(bond, slave_dev);
+-                      if (slave) {
+-                              u16 old_speed = slave->speed;
+-                              u16 old_duplex = slave->duplex;
+-
+-                              bond_update_speed_duplex(slave);
+-
+-                              if (bond_is_lb(bond))
+-                                      break;
+-
+-                              if (old_speed != slave->speed)
+-                                      bond_3ad_adapter_speed_changed(slave);
+-                              if (old_duplex != slave->duplex)
+-                                      bond_3ad_adapter_duplex_changed(slave);
+-                      }
+-              }
+-
++              /*
++               * TODO: is this what we get if somebody
++               * sets up a hierarchical bond, then rmmod's
++               * one of the slave bonding devices?
++               */
+               break;
+       case NETDEV_DOWN:
+               /*
+@@ -4128,7 +4113,7 @@
+               const struct net_device_ops *slave_ops
+                       = slave->dev->netdev_ops;
+               if (slave_ops->ndo_neigh_setup)
+-                      return slave_ops->ndo_neigh_setup(slave->dev, parms);
++                      return slave_ops->ndo_neigh_setup(dev, parms);
+       }
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/cassini.c linux-2.6.29-rc3.owrt/drivers/net/cassini.c
+--- linux-2.6.29.owrt/drivers/net/cassini.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/cassini.c        2009-05-10 23:48:28.000000000 +0200
+@@ -806,7 +806,7 @@
+       cas_phy_write(cp, MII_BMCR, BMCR_RESET);
+       udelay(100);
+-      while (--limit) {
++      while (limit--) {
+               val = cas_phy_read(cp, MII_BMCR);
+               if ((val & BMCR_RESET) == 0)
+                       break;
+@@ -979,7 +979,7 @@
+               writel(val, cp->regs + REG_PCS_MII_CTRL);
+               limit = STOP_TRIES;
+-              while (--limit > 0) {
++              while (limit-- > 0) {
+                       udelay(10);
+                       if ((readl(cp->regs + REG_PCS_MII_CTRL) &
+                            PCS_MII_RESET) == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/cxgb3/cxgb3_main.c linux-2.6.29-rc3.owrt/drivers/net/cxgb3/cxgb3_main.c
+--- linux-2.6.29.owrt/drivers/net/cxgb3/cxgb3_main.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/cxgb3/cxgb3_main.c       2009-05-10 23:48:28.000000000 +0200
+@@ -90,7 +90,6 @@
+       CH_DEVICE(0x30, 2),     /* T3B10 */
+       CH_DEVICE(0x31, 3),     /* T3B20 */
+       CH_DEVICE(0x32, 1),     /* T3B02 */
+-      CH_DEVICE(0x35, 6),     /* T3C20-derived T3C10 */
+       {0,}
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/cxgb3/sge.c linux-2.6.29-rc3.owrt/drivers/net/cxgb3/sge.c
+--- linux-2.6.29.owrt/drivers/net/cxgb3/sge.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/cxgb3/sge.c      2009-05-10 23:48:28.000000000 +0200
+@@ -2276,7 +2276,8 @@
+               } else if ((len = ntohl(r->len_cq)) != 0) {
+                       struct sge_fl *fl;
+-                      lro &= eth && is_eth_tcp(rss_hi);
++                      if (eth)
++                              lro = qs->lro_enabled && is_eth_tcp(rss_hi);
+                       fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
+                       if (fl->use_pages) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/cxgb3/t3_hw.c linux-2.6.29-rc3.owrt/drivers/net/cxgb3/t3_hw.c
+--- linux-2.6.29.owrt/drivers/net/cxgb3/t3_hw.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/cxgb3/t3_hw.c    2009-05-10 23:48:28.000000000 +0200
+@@ -512,13 +512,6 @@
+        F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
+        { S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+        &mi1_mdio_ext_ops, "Chelsio T320"},
+-      {},
+-      {},
+-      {1, 0,
+-       F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
+-       F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
+-       { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+-       &mi1_mdio_ext_ops, "Chelsio T310" },
+ };
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/dm9000.c linux-2.6.29-rc3.owrt/drivers/net/dm9000.c
+--- linux-2.6.29.owrt/drivers/net/dm9000.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/dm9000.c 2009-05-10 23:48:28.000000000 +0200
+@@ -930,15 +930,13 @@
+       struct net_device *dev = dev_id;
+       board_info_t *db = netdev_priv(dev);
+       int int_status;
+-      unsigned long flags;
+       u8 reg_save;
+       dm9000_dbg(db, 3, "entering %s\n", __func__);
+       /* A real interrupt coming */
+-      /* holders of db->lock must always block IRQs */
+-      spin_lock_irqsave(&db->lock, flags);
++      spin_lock(&db->lock);
+       /* Save previous register address */
+       reg_save = readb(db->io_addr);
+@@ -974,7 +972,7 @@
+       /* Restore previous register address */
+       writeb(reg_save, db->io_addr);
+-      spin_unlock_irqrestore(&db->lock, flags);
++      spin_unlock(&db->lock);
+       return IRQ_HANDLED;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/dnet.c linux-2.6.29-rc3.owrt/drivers/net/dnet.c
+--- linux-2.6.29.owrt/drivers/net/dnet.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/dnet.c   1970-01-01 01:00:00.000000000 +0100
+@@ -1,994 +0,0 @@
+-/*
+- * Dave DNET Ethernet Controller driver
+- *
+- * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+- * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/version.h>
+-#include <linux/module.h>
+-#include <linux/moduleparam.h>
+-#include <linux/kernel.h>
+-#include <linux/types.h>
+-#include <linux/slab.h>
+-#include <linux/delay.h>
+-#include <linux/init.h>
+-#include <linux/netdevice.h>
+-#include <linux/etherdevice.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/platform_device.h>
+-#include <linux/phy.h>
+-#include <linux/platform_device.h>
+-
+-#include "dnet.h"
+-
+-#undef DEBUG
+-
+-/* function for reading internal MAC register */
+-u16 dnet_readw_mac(struct dnet *bp, u16 reg)
+-{
+-      u16 data_read;
+-
+-      /* issue a read */
+-      dnet_writel(bp, reg, MACREG_ADDR);
+-
+-      /* since a read/write op to the MAC is very slow,
+-       * we must wait before reading the data */
+-      ndelay(500);
+-
+-      /* read data read from the MAC register */
+-      data_read = dnet_readl(bp, MACREG_DATA);
+-
+-      /* all done */
+-      return data_read;
+-}
+-
+-/* function for writing internal MAC register */
+-void dnet_writew_mac(struct dnet *bp, u16 reg, u16 val)
+-{
+-      /* load data to write */
+-      dnet_writel(bp, val, MACREG_DATA);
+-
+-      /* issue a write */
+-      dnet_writel(bp, reg | DNET_INTERNAL_WRITE, MACREG_ADDR);
+-
+-      /* since a read/write op to the MAC is very slow,
+-       * we must wait before exiting */
+-      ndelay(500);
+-}
+-
+-static void __dnet_set_hwaddr(struct dnet *bp)
+-{
+-      u16 tmp;
+-
+-      tmp = cpu_to_be16(*((u16 *) bp->dev->dev_addr));
+-      dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG, tmp);
+-      tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 2)));
+-      dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG, tmp);
+-      tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 4)));
+-      dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG, tmp);
+-}
+-
+-static void __devinit dnet_get_hwaddr(struct dnet *bp)
+-{
+-      u16 tmp;
+-      u8 addr[6];
+-
+-      /*
+-       * from MAC docs:
+-       * "Note that the MAC address is stored in the registers in Hexadecimal
+-       * form. For example, to set the MAC Address to: AC-DE-48-00-00-80
+-       * would require writing 0xAC (octet 0) to address 0x0B (high byte of
+-       * Mac_addr[15:0]), 0xDE (octet 1) to address 0x0A (Low byte of
+-       * Mac_addr[15:0]), 0x48 (octet 2) to address 0x0D (high byte of
+-       * Mac_addr[15:0]), 0x00 (octet 3) to address 0x0C (Low byte of
+-       * Mac_addr[15:0]), 0x00 (octet 4) to address 0x0F (high byte of
+-       * Mac_addr[15:0]), and 0x80 (octet 5) to address * 0x0E (Low byte of
+-       * Mac_addr[15:0]).
+-       */
+-      tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG);
+-      *((u16 *) addr) = be16_to_cpu(tmp);
+-      tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG);
+-      *((u16 *) (addr + 2)) = be16_to_cpu(tmp);
+-      tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG);
+-      *((u16 *) (addr + 4)) = be16_to_cpu(tmp);
+-
+-      if (is_valid_ether_addr(addr))
+-              memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+-}
+-
+-static int dnet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+-{
+-      struct dnet *bp = bus->priv;
+-      u16 value;
+-
+-      while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+-                              & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+-              cpu_relax();
+-
+-      /* only 5 bits allowed for phy-addr and reg_offset */
+-      mii_id &= 0x1f;
+-      regnum &= 0x1f;
+-
+-      /* prepare reg_value for a read */
+-      value = (mii_id << 8);
+-      value |= regnum;
+-
+-      /* write control word */
+-      dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, value);
+-
+-      /* wait for end of transfer */
+-      while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+-                              & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+-              cpu_relax();
+-
+-      value = dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG);
+-
+-      pr_debug("mdio_read %02x:%02x <- %04x\n", mii_id, regnum, value);
+-
+-      return value;
+-}
+-
+-static int dnet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+-                         u16 value)
+-{
+-      struct dnet *bp = bus->priv;
+-      u16 tmp;
+-
+-      pr_debug("mdio_write %02x:%02x <- %04x\n", mii_id, regnum, value);
+-
+-      while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+-                              & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+-              cpu_relax();
+-
+-      /* prepare for a write operation */
+-      tmp = (1 << 13);
+-
+-      /* only 5 bits allowed for phy-addr and reg_offset */
+-      mii_id &= 0x1f;
+-      regnum &= 0x1f;
+-
+-      /* only 16 bits on data */
+-      value &= 0xffff;
+-
+-      /* prepare reg_value for a write */
+-      tmp |= (mii_id << 8);
+-      tmp |= regnum;
+-
+-      /* write data to write first */
+-      dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG, value);
+-
+-      /* write control word */
+-      dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, tmp);
+-
+-      while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+-                              & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+-              cpu_relax();
+-
+-      return 0;
+-}
+-
+-static int dnet_mdio_reset(struct mii_bus *bus)
+-{
+-      return 0;
+-}
+-
+-static void dnet_handle_link_change(struct net_device *dev)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-      struct phy_device *phydev = bp->phy_dev;
+-      unsigned long flags;
+-      u32 mode_reg, ctl_reg;
+-
+-      int status_change = 0;
+-
+-      spin_lock_irqsave(&bp->lock, flags);
+-
+-      mode_reg = dnet_readw_mac(bp, DNET_INTERNAL_MODE_REG);
+-      ctl_reg = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+-
+-      if (phydev->link) {
+-              if (bp->duplex != phydev->duplex) {
+-                      if (phydev->duplex)
+-                              ctl_reg &=
+-                                  ~(DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP);
+-                      else
+-                              ctl_reg |=
+-                                  DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP;
+-
+-                      bp->duplex = phydev->duplex;
+-                      status_change = 1;
+-              }
+-
+-              if (bp->speed != phydev->speed) {
+-                      status_change = 1;
+-                      switch (phydev->speed) {
+-                      case 1000:
+-                              mode_reg |= DNET_INTERNAL_MODE_GBITEN;
+-                              break;
+-                      case 100:
+-                      case 10:
+-                              mode_reg &= ~DNET_INTERNAL_MODE_GBITEN;
+-                              break;
+-                      default:
+-                              printk(KERN_WARNING
+-                                     "%s: Ack!  Speed (%d) is not "
+-                                     "10/100/1000!\n", dev->name,
+-                                     phydev->speed);
+-                              break;
+-                      }
+-                      bp->speed = phydev->speed;
+-              }
+-      }
+-
+-      if (phydev->link != bp->link) {
+-              if (phydev->link) {
+-                      mode_reg |=
+-                          (DNET_INTERNAL_MODE_RXEN | DNET_INTERNAL_MODE_TXEN);
+-              } else {
+-                      mode_reg &=
+-                          ~(DNET_INTERNAL_MODE_RXEN |
+-                            DNET_INTERNAL_MODE_TXEN);
+-                      bp->speed = 0;
+-                      bp->duplex = -1;
+-              }
+-              bp->link = phydev->link;
+-
+-              status_change = 1;
+-      }
+-
+-      if (status_change) {
+-              dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, ctl_reg);
+-              dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, mode_reg);
+-      }
+-
+-      spin_unlock_irqrestore(&bp->lock, flags);
+-
+-      if (status_change) {
+-              if (phydev->link)
+-                      printk(KERN_INFO "%s: link up (%d/%s)\n",
+-                             dev->name, phydev->speed,
+-                             DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+-              else
+-                      printk(KERN_INFO "%s: link down\n", dev->name);
+-      }
+-}
+-
+-static int dnet_mii_probe(struct net_device *dev)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-      struct phy_device *phydev = NULL;
+-      int phy_addr;
+-
+-      /* find the first phy */
+-      for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+-              if (bp->mii_bus->phy_map[phy_addr]) {
+-                      phydev = bp->mii_bus->phy_map[phy_addr];
+-                      break;
+-              }
+-      }
+-
+-      if (!phydev) {
+-              printk(KERN_ERR "%s: no PHY found\n", dev->name);
+-              return -ENODEV;
+-      }
+-
+-      /* TODO : add pin_irq */
+-
+-      /* attach the mac to the phy */
+-      if (bp->capabilities & DNET_HAS_RMII) {
+-              phydev = phy_connect(dev, dev_name(&phydev->dev),
+-                                   &dnet_handle_link_change, 0,
+-                                   PHY_INTERFACE_MODE_RMII);
+-      } else {
+-              phydev = phy_connect(dev, dev_name(&phydev->dev),
+-                                   &dnet_handle_link_change, 0,
+-                                   PHY_INTERFACE_MODE_MII);
+-      }
+-
+-      if (IS_ERR(phydev)) {
+-              printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+-              return PTR_ERR(phydev);
+-      }
+-
+-      /* mask with MAC supported features */
+-      if (bp->capabilities & DNET_HAS_GIGABIT)
+-              phydev->supported &= PHY_GBIT_FEATURES;
+-      else
+-              phydev->supported &= PHY_BASIC_FEATURES;
+-
+-      phydev->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
+-
+-      phydev->advertising = phydev->supported;
+-
+-      bp->link = 0;
+-      bp->speed = 0;
+-      bp->duplex = -1;
+-      bp->phy_dev = phydev;
+-
+-      return 0;
+-}
+-
+-static int dnet_mii_init(struct dnet *bp)
+-{
+-      int err, i;
+-
+-      bp->mii_bus = mdiobus_alloc();
+-      if (bp->mii_bus == NULL)
+-              return -ENOMEM;
+-
+-      bp->mii_bus->name = "dnet_mii_bus";
+-      bp->mii_bus->read = &dnet_mdio_read;
+-      bp->mii_bus->write = &dnet_mdio_write;
+-      bp->mii_bus->reset = &dnet_mdio_reset;
+-
+-      snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+-
+-      bp->mii_bus->priv = bp;
+-
+-      bp->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+-      if (!bp->mii_bus->irq) {
+-              err = -ENOMEM;
+-              goto err_out;
+-      }
+-
+-      for (i = 0; i < PHY_MAX_ADDR; i++)
+-              bp->mii_bus->irq[i] = PHY_POLL;
+-
+-      platform_set_drvdata(bp->dev, bp->mii_bus);
+-
+-      if (mdiobus_register(bp->mii_bus)) {
+-              err = -ENXIO;
+-              goto err_out_free_mdio_irq;
+-      }
+-
+-      if (dnet_mii_probe(bp->dev) != 0) {
+-              err = -ENXIO;
+-              goto err_out_unregister_bus;
+-      }
+-
+-      return 0;
+-
+-err_out_unregister_bus:
+-      mdiobus_unregister(bp->mii_bus);
+-err_out_free_mdio_irq:
+-      kfree(bp->mii_bus->irq);
+-err_out:
+-      mdiobus_free(bp->mii_bus);
+-      return err;
+-}
+-
+-/* For Neptune board: LINK1000 as Link LED and TX as activity LED */
+-int dnet_phy_marvell_fixup(struct phy_device *phydev)
+-{
+-      return phy_write(phydev, 0x18, 0x4148);
+-}
+-
+-static void dnet_update_stats(struct dnet *bp)
+-{
+-      u32 __iomem *reg = bp->regs + DNET_RX_PKT_IGNR_CNT;
+-      u32 *p = &bp->hw_stats.rx_pkt_ignr;
+-      u32 *end = &bp->hw_stats.rx_byte + 1;
+-
+-      WARN_ON((unsigned long)(end - p - 1) !=
+-              (DNET_RX_BYTE_CNT - DNET_RX_PKT_IGNR_CNT) / 4);
+-
+-      for (; p < end; p++, reg++)
+-              *p += readl(reg);
+-
+-      reg = bp->regs + DNET_TX_UNICAST_CNT;
+-      p = &bp->hw_stats.tx_unicast;
+-      end = &bp->hw_stats.tx_byte + 1;
+-
+-      WARN_ON((unsigned long)(end - p - 1) !=
+-              (DNET_TX_BYTE_CNT - DNET_TX_UNICAST_CNT) / 4);
+-
+-      for (; p < end; p++, reg++)
+-              *p += readl(reg);
+-}
+-
+-static int dnet_poll(struct napi_struct *napi, int budget)
+-{
+-      struct dnet *bp = container_of(napi, struct dnet, napi);
+-      struct net_device *dev = bp->dev;
+-      int npackets = 0;
+-      unsigned int pkt_len;
+-      struct sk_buff *skb;
+-      unsigned int *data_ptr;
+-      u32 int_enable;
+-      u32 cmd_word;
+-      int i;
+-
+-      while (npackets < budget) {
+-              /*
+-               * break out of while loop if there are no more
+-               * packets waiting
+-               */
+-              if (!(dnet_readl(bp, RX_FIFO_WCNT) >> 16)) {
+-                      napi_complete(napi);
+-                      int_enable = dnet_readl(bp, INTR_ENB);
+-                      int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+-                      dnet_writel(bp, int_enable, INTR_ENB);
+-                      return 0;
+-              }
+-
+-              cmd_word = dnet_readl(bp, RX_LEN_FIFO);
+-              pkt_len = cmd_word & 0xFFFF;
+-
+-              if (cmd_word & 0xDF180000)
+-                      printk(KERN_ERR "%s packet receive error %x\n",
+-                             __func__, cmd_word);
+-
+-              skb = dev_alloc_skb(pkt_len + 5);
+-              if (skb != NULL) {
+-                      /* Align IP on 16 byte boundaries */
+-                      skb_reserve(skb, 2);
+-                      /*
+-                       * 'skb_put()' points to the start of sk_buff
+-                       * data area.
+-                       */
+-                      data_ptr = (unsigned int *)skb_put(skb, pkt_len);
+-                      for (i = 0; i < (pkt_len + 3) >> 2; i++)
+-                              *data_ptr++ = dnet_readl(bp, RX_DATA_FIFO);
+-                      skb->protocol = eth_type_trans(skb, dev);
+-                      netif_receive_skb(skb);
+-                      npackets++;
+-              } else
+-                      printk(KERN_NOTICE
+-                             "%s: No memory to allocate a sk_buff of "
+-                             "size %u.\n", dev->name, pkt_len);
+-      }
+-
+-      budget -= npackets;
+-
+-      if (npackets < budget) {
+-              /* We processed all packets available.  Tell NAPI it can
+-               * stop polling then re-enable rx interrupts */
+-              napi_complete(napi);
+-              int_enable = dnet_readl(bp, INTR_ENB);
+-              int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+-              dnet_writel(bp, int_enable, INTR_ENB);
+-              return 0;
+-      }
+-
+-      /* There are still packets waiting */
+-      return 1;
+-}
+-
+-static irqreturn_t dnet_interrupt(int irq, void *dev_id)
+-{
+-      struct net_device *dev = dev_id;
+-      struct dnet *bp = netdev_priv(dev);
+-      u32 int_src, int_enable, int_current;
+-      unsigned long flags;
+-      unsigned int handled = 0;
+-
+-      spin_lock_irqsave(&bp->lock, flags);
+-
+-      /* read and clear the DNET irq (clear on read) */
+-      int_src = dnet_readl(bp, INTR_SRC);
+-      int_enable = dnet_readl(bp, INTR_ENB);
+-      int_current = int_src & int_enable;
+-
+-      /* restart the queue if we had stopped it for TX fifo almost full */
+-      if (int_current & DNET_INTR_SRC_TX_FIFOAE) {
+-              int_enable = dnet_readl(bp, INTR_ENB);
+-              int_enable &= ~DNET_INTR_ENB_TX_FIFOAE;
+-              dnet_writel(bp, int_enable, INTR_ENB);
+-              netif_wake_queue(dev);
+-              handled = 1;
+-      }
+-
+-      /* RX FIFO error checking */
+-      if (int_current &
+-          (DNET_INTR_SRC_RX_CMDFIFOFF | DNET_INTR_SRC_RX_DATAFIFOFF)) {
+-              printk(KERN_ERR "%s: RX fifo error %x, irq %x\n", __func__,
+-                     dnet_readl(bp, RX_STATUS), int_current);
+-              /* we can only flush the RX FIFOs */
+-              dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH, SYS_CTL);
+-              ndelay(500);
+-              dnet_writel(bp, 0, SYS_CTL);
+-              handled = 1;
+-      }
+-
+-      /* TX FIFO error checking */
+-      if (int_current &
+-          (DNET_INTR_SRC_TX_FIFOFULL | DNET_INTR_SRC_TX_DISCFRM)) {
+-              printk(KERN_ERR "%s: TX fifo error %x, irq %x\n", __func__,
+-                     dnet_readl(bp, TX_STATUS), int_current);
+-              /* we can only flush the TX FIFOs */
+-              dnet_writel(bp, DNET_SYS_CTL_TXFIFOFLUSH, SYS_CTL);
+-              ndelay(500);
+-              dnet_writel(bp, 0, SYS_CTL);
+-              handled = 1;
+-      }
+-
+-      if (int_current & DNET_INTR_SRC_RX_CMDFIFOAF) {
+-              if (napi_schedule_prep(&bp->napi)) {
+-                      /*
+-                       * There's no point taking any more interrupts
+-                       * until we have processed the buffers
+-                       */
+-                      /* Disable Rx interrupts and schedule NAPI poll */
+-                      int_enable = dnet_readl(bp, INTR_ENB);
+-                      int_enable &= ~DNET_INTR_SRC_RX_CMDFIFOAF;
+-                      dnet_writel(bp, int_enable, INTR_ENB);
+-                      __napi_schedule(&bp->napi);
+-              }
+-              handled = 1;
+-      }
+-
+-      if (!handled)
+-              pr_debug("%s: irq %x remains\n", __func__, int_current);
+-
+-      spin_unlock_irqrestore(&bp->lock, flags);
+-
+-      return IRQ_RETVAL(handled);
+-}
+-
+-#ifdef DEBUG
+-static inline void dnet_print_skb(struct sk_buff *skb)
+-{
+-      int k;
+-      printk(KERN_DEBUG PFX "data:");
+-      for (k = 0; k < skb->len; k++)
+-              printk(" %02x", (unsigned int)skb->data[k]);
+-      printk("\n");
+-}
+-#else
+-#define dnet_print_skb(skb)   do {} while (0)
+-#endif
+-
+-static int dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+-{
+-
+-      struct dnet *bp = netdev_priv(dev);
+-      u32 tx_status, irq_enable;
+-      unsigned int len, i, tx_cmd, wrsz;
+-      unsigned long flags;
+-      unsigned int *bufp;
+-
+-      tx_status = dnet_readl(bp, TX_STATUS);
+-
+-      pr_debug("start_xmit: len %u head %p data %p\n",
+-             skb->len, skb->head, skb->data);
+-      dnet_print_skb(skb);
+-
+-      /* frame size (words) */
+-      len = (skb->len + 3) >> 2;
+-
+-      spin_lock_irqsave(&bp->lock, flags);
+-
+-      tx_status = dnet_readl(bp, TX_STATUS);
+-
+-      bufp = (unsigned int *)(((unsigned long) skb->data) & ~0x3UL);
+-      wrsz = (u32) skb->len + 3;
+-      wrsz += ((unsigned long) skb->data) & 0x3;
+-      wrsz >>= 2;
+-      tx_cmd = ((((unsigned long)(skb->data)) & 0x03) << 16) | (u32) skb->len;
+-
+-      /* check if there is enough room for the current frame */
+-      if (wrsz < (DNET_FIFO_SIZE - dnet_readl(bp, TX_FIFO_WCNT))) {
+-              for (i = 0; i < wrsz; i++)
+-                      dnet_writel(bp, *bufp++, TX_DATA_FIFO);
+-
+-              /*
+-               * inform MAC that a packet's written and ready to be
+-               * shipped out
+-               */
+-              dnet_writel(bp, tx_cmd, TX_LEN_FIFO);
+-      }
+-
+-      if (dnet_readl(bp, TX_FIFO_WCNT) > DNET_FIFO_TX_DATA_AF_TH) {
+-              netif_stop_queue(dev);
+-              tx_status = dnet_readl(bp, INTR_SRC);
+-              irq_enable = dnet_readl(bp, INTR_ENB);
+-              irq_enable |= DNET_INTR_ENB_TX_FIFOAE;
+-              dnet_writel(bp, irq_enable, INTR_ENB);
+-      }
+-
+-      /* free the buffer */
+-      dev_kfree_skb(skb);
+-
+-      spin_unlock_irqrestore(&bp->lock, flags);
+-
+-      dev->trans_start = jiffies;
+-
+-      return 0;
+-}
+-
+-static void dnet_reset_hw(struct dnet *bp)
+-{
+-      /* put ts_mac in IDLE state i.e. disable rx/tx */
+-      dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, DNET_INTERNAL_MODE_FCEN);
+-
+-      /*
+-       * RX FIFO almost full threshold: only cmd FIFO almost full is
+-       * implemented for RX side
+-       */
+-      dnet_writel(bp, DNET_FIFO_RX_CMD_AF_TH, RX_FIFO_TH);
+-      /*
+-       * TX FIFO almost empty threshold: only data FIFO almost empty
+-       * is implemented for TX side
+-       */
+-      dnet_writel(bp, DNET_FIFO_TX_DATA_AE_TH, TX_FIFO_TH);
+-
+-      /* flush rx/tx fifos */
+-      dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH | DNET_SYS_CTL_TXFIFOFLUSH,
+-                      SYS_CTL);
+-      msleep(1);
+-      dnet_writel(bp, 0, SYS_CTL);
+-}
+-
+-static void dnet_init_hw(struct dnet *bp)
+-{
+-      u32 config;
+-
+-      dnet_reset_hw(bp);
+-      __dnet_set_hwaddr(bp);
+-
+-      config = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+-
+-      if (bp->dev->flags & IFF_PROMISC)
+-              /* Copy All Frames */
+-              config |= DNET_INTERNAL_RXTX_CONTROL_ENPROMISC;
+-      if (!(bp->dev->flags & IFF_BROADCAST))
+-              /* No BroadCast */
+-              config |= DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST;
+-
+-      config |= DNET_INTERNAL_RXTX_CONTROL_RXPAUSE |
+-          DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST |
+-          DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL |
+-          DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS;
+-
+-      dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, config);
+-
+-      /* clear irq before enabling them */
+-      config = dnet_readl(bp, INTR_SRC);
+-
+-      /* enable RX/TX interrupt, recv packet ready interrupt */
+-      dnet_writel(bp, DNET_INTR_ENB_GLOBAL_ENABLE | DNET_INTR_ENB_RX_SUMMARY |
+-                      DNET_INTR_ENB_TX_SUMMARY | DNET_INTR_ENB_RX_FIFOERR |
+-                      DNET_INTR_ENB_RX_ERROR | DNET_INTR_ENB_RX_FIFOFULL |
+-                      DNET_INTR_ENB_TX_FIFOFULL | DNET_INTR_ENB_TX_DISCFRM |
+-                      DNET_INTR_ENB_RX_PKTRDY, INTR_ENB);
+-}
+-
+-static int dnet_open(struct net_device *dev)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-
+-      /* if the phy is not yet register, retry later */
+-      if (!bp->phy_dev)
+-              return -EAGAIN;
+-
+-      if (!is_valid_ether_addr(dev->dev_addr))
+-              return -EADDRNOTAVAIL;
+-
+-      napi_enable(&bp->napi);
+-      dnet_init_hw(bp);
+-
+-      phy_start_aneg(bp->phy_dev);
+-
+-      /* schedule a link state check */
+-      phy_start(bp->phy_dev);
+-
+-      netif_start_queue(dev);
+-
+-      return 0;
+-}
+-
+-static int dnet_close(struct net_device *dev)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-
+-      netif_stop_queue(dev);
+-      napi_disable(&bp->napi);
+-
+-      if (bp->phy_dev)
+-              phy_stop(bp->phy_dev);
+-
+-      dnet_reset_hw(bp);
+-      netif_carrier_off(dev);
+-
+-      return 0;
+-}
+-
+-static inline void dnet_print_pretty_hwstats(struct dnet_stats *hwstat)
+-{
+-      pr_debug("%s\n", __func__);
+-      pr_debug("----------------------------- RX statistics "
+-               "-------------------------------\n");
+-      pr_debug("RX_PKT_IGNR_CNT %-8x\n", hwstat->rx_pkt_ignr);
+-      pr_debug("RX_LEN_CHK_ERR_CNT %-8x\n", hwstat->rx_len_chk_err);
+-      pr_debug("RX_LNG_FRM_CNT %-8x\n", hwstat->rx_lng_frm);
+-      pr_debug("RX_SHRT_FRM_CNT %-8x\n", hwstat->rx_shrt_frm);
+-      pr_debug("RX_IPG_VIOL_CNT %-8x\n", hwstat->rx_ipg_viol);
+-      pr_debug("RX_CRC_ERR_CNT %-8x\n", hwstat->rx_crc_err);
+-      pr_debug("RX_OK_PKT_CNT %-8x\n", hwstat->rx_ok_pkt);
+-      pr_debug("RX_CTL_FRM_CNT %-8x\n", hwstat->rx_ctl_frm);
+-      pr_debug("RX_PAUSE_FRM_CNT %-8x\n", hwstat->rx_pause_frm);
+-      pr_debug("RX_MULTICAST_CNT %-8x\n", hwstat->rx_multicast);
+-      pr_debug("RX_BROADCAST_CNT %-8x\n", hwstat->rx_broadcast);
+-      pr_debug("RX_VLAN_TAG_CNT %-8x\n", hwstat->rx_vlan_tag);
+-      pr_debug("RX_PRE_SHRINK_CNT %-8x\n", hwstat->rx_pre_shrink);
+-      pr_debug("RX_DRIB_NIB_CNT %-8x\n", hwstat->rx_drib_nib);
+-      pr_debug("RX_UNSUP_OPCD_CNT %-8x\n", hwstat->rx_unsup_opcd);
+-      pr_debug("RX_BYTE_CNT %-8x\n", hwstat->rx_byte);
+-      pr_debug("----------------------------- TX statistics "
+-               "-------------------------------\n");
+-      pr_debug("TX_UNICAST_CNT %-8x\n", hwstat->tx_unicast);
+-      pr_debug("TX_PAUSE_FRM_CNT %-8x\n", hwstat->tx_pause_frm);
+-      pr_debug("TX_MULTICAST_CNT %-8x\n", hwstat->tx_multicast);
+-      pr_debug("TX_BRDCAST_CNT %-8x\n", hwstat->tx_brdcast);
+-      pr_debug("TX_VLAN_TAG_CNT %-8x\n", hwstat->tx_vlan_tag);
+-      pr_debug("TX_BAD_FCS_CNT %-8x\n", hwstat->tx_bad_fcs);
+-      pr_debug("TX_JUMBO_CNT %-8x\n", hwstat->tx_jumbo);
+-      pr_debug("TX_BYTE_CNT %-8x\n", hwstat->tx_byte);
+-}
+-
+-static struct net_device_stats *dnet_get_stats(struct net_device *dev)
+-{
+-
+-      struct dnet *bp = netdev_priv(dev);
+-      struct net_device_stats *nstat = &dev->stats;
+-      struct dnet_stats *hwstat = &bp->hw_stats;
+-
+-      /* read stats from hardware */
+-      dnet_update_stats(bp);
+-
+-      /* Convert HW stats into netdevice stats */
+-      nstat->rx_errors = (hwstat->rx_len_chk_err +
+-                          hwstat->rx_lng_frm + hwstat->rx_shrt_frm +
+-                          /* ignore IGP violation error
+-                          hwstat->rx_ipg_viol + */
+-                          hwstat->rx_crc_err +
+-                          hwstat->rx_pre_shrink +
+-                          hwstat->rx_drib_nib + hwstat->rx_unsup_opcd);
+-      nstat->tx_errors = hwstat->tx_bad_fcs;
+-      nstat->rx_length_errors = (hwstat->rx_len_chk_err +
+-                                 hwstat->rx_lng_frm +
+-                                 hwstat->rx_shrt_frm + hwstat->rx_pre_shrink);
+-      nstat->rx_crc_errors = hwstat->rx_crc_err;
+-      nstat->rx_frame_errors = hwstat->rx_pre_shrink + hwstat->rx_drib_nib;
+-      nstat->rx_packets = hwstat->rx_ok_pkt;
+-      nstat->tx_packets = (hwstat->tx_unicast +
+-                           hwstat->tx_multicast + hwstat->tx_brdcast);
+-      nstat->rx_bytes = hwstat->rx_byte;
+-      nstat->tx_bytes = hwstat->tx_byte;
+-      nstat->multicast = hwstat->rx_multicast;
+-      nstat->rx_missed_errors = hwstat->rx_pkt_ignr;
+-
+-      dnet_print_pretty_hwstats(hwstat);
+-
+-      return nstat;
+-}
+-
+-static int dnet_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-      struct phy_device *phydev = bp->phy_dev;
+-
+-      if (!phydev)
+-              return -ENODEV;
+-
+-      return phy_ethtool_gset(phydev, cmd);
+-}
+-
+-static int dnet_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-      struct phy_device *phydev = bp->phy_dev;
+-
+-      if (!phydev)
+-              return -ENODEV;
+-
+-      return phy_ethtool_sset(phydev, cmd);
+-}
+-
+-static int dnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+-{
+-      struct dnet *bp = netdev_priv(dev);
+-      struct phy_device *phydev = bp->phy_dev;
+-
+-      if (!netif_running(dev))
+-              return -EINVAL;
+-
+-      if (!phydev)
+-              return -ENODEV;
+-
+-      return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+-}
+-
+-static void dnet_get_drvinfo(struct net_device *dev,
+-                           struct ethtool_drvinfo *info)
+-{
+-      strcpy(info->driver, DRV_NAME);
+-      strcpy(info->version, DRV_VERSION);
+-      strcpy(info->bus_info, "0");
+-}
+-
+-static const struct ethtool_ops dnet_ethtool_ops = {
+-      .get_settings           = dnet_get_settings,
+-      .set_settings           = dnet_set_settings,
+-      .get_drvinfo            = dnet_get_drvinfo,
+-      .get_link               = ethtool_op_get_link,
+-};
+-
+-static const struct net_device_ops dnet_netdev_ops = {
+-      .ndo_open               = dnet_open,
+-      .ndo_stop               = dnet_close,
+-      .ndo_get_stats          = dnet_get_stats,
+-      .ndo_start_xmit         = dnet_start_xmit,
+-      .ndo_do_ioctl           = dnet_ioctl,
+-      .ndo_set_mac_address    = eth_mac_addr,
+-      .ndo_validate_addr      = eth_validate_addr,
+-      .ndo_change_mtu         = eth_change_mtu,
+-};
+-
+-static int __devinit dnet_probe(struct platform_device *pdev)
+-{
+-      struct resource *res;
+-      struct net_device *dev;
+-      struct dnet *bp;
+-      struct phy_device *phydev;
+-      int err = -ENXIO;
+-      unsigned int mem_base, mem_size, irq;
+-
+-      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-      if (!res) {
+-              dev_err(&pdev->dev, "no mmio resource defined\n");
+-              goto err_out;
+-      }
+-      mem_base = res->start;
+-      mem_size = resource_size(res);
+-      irq = platform_get_irq(pdev, 0);
+-
+-      if (!request_mem_region(mem_base, mem_size, DRV_NAME)) {
+-              dev_err(&pdev->dev, "no memory region available\n");
+-              err = -EBUSY;
+-              goto err_out;
+-      }
+-
+-      err = -ENOMEM;
+-      dev = alloc_etherdev(sizeof(*bp));
+-      if (!dev) {
+-              dev_err(&pdev->dev, "etherdev alloc failed, aborting.\n");
+-              goto err_out;
+-      }
+-
+-      /* TODO: Actually, we have some interesting features... */
+-      dev->features |= 0;
+-
+-      bp = netdev_priv(dev);
+-      bp->dev = dev;
+-
+-      SET_NETDEV_DEV(dev, &pdev->dev);
+-
+-      spin_lock_init(&bp->lock);
+-
+-      bp->regs = ioremap(mem_base, mem_size);
+-      if (!bp->regs) {
+-              dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+-              err = -ENOMEM;
+-              goto err_out_free_dev;
+-      }
+-
+-      dev->irq = irq;
+-      err = request_irq(dev->irq, dnet_interrupt, 0, DRV_NAME, dev);
+-      if (err) {
+-              dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+-                     irq, err);
+-              goto err_out_iounmap;
+-      }
+-
+-      dev->netdev_ops = &dnet_netdev_ops;
+-      netif_napi_add(dev, &bp->napi, dnet_poll, 64);
+-      dev->ethtool_ops = &dnet_ethtool_ops;
+-
+-      dev->base_addr = (unsigned long)bp->regs;
+-
+-      bp->capabilities = dnet_readl(bp, VERCAPS) & DNET_CAPS_MASK;
+-
+-      dnet_get_hwaddr(bp);
+-
+-      if (!is_valid_ether_addr(dev->dev_addr)) {
+-              /* choose a random ethernet address */
+-              random_ether_addr(dev->dev_addr);
+-              __dnet_set_hwaddr(bp);
+-      }
+-
+-      err = register_netdev(dev);
+-      if (err) {
+-              dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
+-              goto err_out_free_irq;
+-      }
+-
+-      /* register the PHY board fixup (for Marvell 88E1111) */
+-      err = phy_register_fixup_for_uid(0x01410cc0, 0xfffffff0,
+-                                       dnet_phy_marvell_fixup);
+-      /* we can live without it, so just issue a warning */
+-      if (err)
+-              dev_warn(&pdev->dev, "Cannot register PHY board fixup.\n");
+-
+-      if (dnet_mii_init(bp) != 0)
+-              goto err_out_unregister_netdev;
+-
+-      dev_info(&pdev->dev, "Dave DNET at 0x%p (0x%08x) irq %d %pM\n",
+-             bp->regs, mem_base, dev->irq, dev->dev_addr);
+-      dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma \n",
+-             (bp->capabilities & DNET_HAS_MDIO) ? "" : "no ",
+-             (bp->capabilities & DNET_HAS_IRQ) ? "" : "no ",
+-             (bp->capabilities & DNET_HAS_GIGABIT) ? "" : "no ",
+-             (bp->capabilities & DNET_HAS_DMA) ? "" : "no ");
+-      phydev = bp->phy_dev;
+-      dev_info(&pdev->dev, "attached PHY driver [%s] "
+-             "(mii_bus:phy_addr=%s, irq=%d)\n",
+-             phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+-
+-      return 0;
+-
+-err_out_unregister_netdev:
+-      unregister_netdev(dev);
+-err_out_free_irq:
+-      free_irq(dev->irq, dev);
+-err_out_iounmap:
+-      iounmap(bp->regs);
+-err_out_free_dev:
+-      free_netdev(dev);
+-err_out:
+-      return err;
+-}
+-
+-static int __devexit dnet_remove(struct platform_device *pdev)
+-{
+-
+-      struct net_device *dev;
+-      struct dnet *bp;
+-
+-      dev = platform_get_drvdata(pdev);
+-
+-      if (dev) {
+-              bp = netdev_priv(dev);
+-              if (bp->phy_dev)
+-                      phy_disconnect(bp->phy_dev);
+-              mdiobus_unregister(bp->mii_bus);
+-              kfree(bp->mii_bus->irq);
+-              mdiobus_free(bp->mii_bus);
+-              unregister_netdev(dev);
+-              free_irq(dev->irq, dev);
+-              iounmap(bp->regs);
+-              free_netdev(dev);
+-      }
+-
+-      return 0;
+-}
+-
+-static struct platform_driver dnet_driver = {
+-      .probe          = dnet_probe,
+-      .remove         = __devexit_p(dnet_remove),
+-      .driver         = {
+-              .name           = "dnet",
+-      },
+-};
+-
+-static int __init dnet_init(void)
+-{
+-      return platform_driver_register(&dnet_driver);
+-}
+-
+-static void __exit dnet_exit(void)
+-{
+-      platform_driver_unregister(&dnet_driver);
+-}
+-
+-module_init(dnet_init);
+-module_exit(dnet_exit);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("Dave DNET Ethernet driver");
+-MODULE_AUTHOR("Ilya Yanok <yanok@emcraft.com>, "
+-            "Matteo Vit <matteo.vit@dave.eu>");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/dnet.h linux-2.6.29-rc3.owrt/drivers/net/dnet.h
+--- linux-2.6.29.owrt/drivers/net/dnet.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/dnet.h   1970-01-01 01:00:00.000000000 +0100
+@@ -1,225 +0,0 @@
+-/*
+- * Dave DNET Ethernet Controller driver
+- *
+- * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef _DNET_H
+-#define _DNET_H
+-
+-#define DRV_NAME              "dnet"
+-#define DRV_VERSION           "0.9.1"
+-#define PFX                           DRV_NAME ": "
+-
+-/* Register access macros */
+-#define dnet_writel(port, value, reg) \
+-      writel((value), (port)->regs + DNET_##reg)
+-#define dnet_readl(port, reg) readl((port)->regs + DNET_##reg)
+-
+-/* ALL DNET FIFO REGISTERS */
+-#define DNET_RX_LEN_FIFO              0x000   /* RX_LEN_FIFO */
+-#define DNET_RX_DATA_FIFO             0x004   /* RX_DATA_FIFO */
+-#define DNET_TX_LEN_FIFO              0x008   /* TX_LEN_FIFO */
+-#define DNET_TX_DATA_FIFO             0x00C   /* TX_DATA_FIFO */
+-
+-/* ALL DNET CONTROL/STATUS REGISTERS OFFSETS */
+-#define DNET_VERCAPS                  0x100   /* VERCAPS */
+-#define DNET_INTR_SRC                 0x104   /* INTR_SRC */
+-#define DNET_INTR_ENB                 0x108   /* INTR_ENB */
+-#define DNET_RX_STATUS                        0x10C   /* RX_STATUS */
+-#define DNET_TX_STATUS                        0x110   /* TX_STATUS */
+-#define DNET_RX_FRAMES_CNT            0x114   /* RX_FRAMES_CNT */
+-#define DNET_TX_FRAMES_CNT            0x118   /* TX_FRAMES_CNT */
+-#define DNET_RX_FIFO_TH                       0x11C   /* RX_FIFO_TH */
+-#define DNET_TX_FIFO_TH                       0x120   /* TX_FIFO_TH */
+-#define DNET_SYS_CTL                  0x124   /* SYS_CTL */
+-#define DNET_PAUSE_TMR                        0x128   /* PAUSE_TMR */
+-#define DNET_RX_FIFO_WCNT             0x12C   /* RX_FIFO_WCNT */
+-#define DNET_TX_FIFO_WCNT             0x130   /* TX_FIFO_WCNT */
+-
+-/* ALL DNET MAC REGISTERS */
+-#define DNET_MACREG_DATA              0x200   /* Mac-Reg Data */
+-#define DNET_MACREG_ADDR              0x204   /* Mac-Reg Addr  */
+-
+-/* ALL DNET RX STATISTICS COUNTERS  */
+-#define DNET_RX_PKT_IGNR_CNT          0x300
+-#define DNET_RX_LEN_CHK_ERR_CNT               0x304
+-#define DNET_RX_LNG_FRM_CNT           0x308
+-#define DNET_RX_SHRT_FRM_CNT          0x30C
+-#define DNET_RX_IPG_VIOL_CNT          0x310
+-#define DNET_RX_CRC_ERR_CNT           0x314
+-#define DNET_RX_OK_PKT_CNT            0x318
+-#define DNET_RX_CTL_FRM_CNT           0x31C
+-#define DNET_RX_PAUSE_FRM_CNT         0x320
+-#define DNET_RX_MULTICAST_CNT         0x324
+-#define DNET_RX_BROADCAST_CNT         0x328
+-#define DNET_RX_VLAN_TAG_CNT          0x32C
+-#define DNET_RX_PRE_SHRINK_CNT                0x330
+-#define DNET_RX_DRIB_NIB_CNT          0x334
+-#define DNET_RX_UNSUP_OPCD_CNT                0x338
+-#define DNET_RX_BYTE_CNT              0x33C
+-
+-/* DNET TX STATISTICS COUNTERS */
+-#define DNET_TX_UNICAST_CNT           0x400
+-#define DNET_TX_PAUSE_FRM_CNT         0x404
+-#define DNET_TX_MULTICAST_CNT         0x408
+-#define DNET_TX_BRDCAST_CNT           0x40C
+-#define DNET_TX_VLAN_TAG_CNT          0x410
+-#define DNET_TX_BAD_FCS_CNT           0x414
+-#define DNET_TX_JUMBO_CNT             0x418
+-#define DNET_TX_BYTE_CNT              0x41C
+-
+-/* SOME INTERNAL MAC-CORE REGISTER */
+-#define DNET_INTERNAL_MODE_REG                0x0
+-#define DNET_INTERNAL_RXTX_CONTROL_REG        0x2
+-#define DNET_INTERNAL_MAX_PKT_SIZE_REG        0x4
+-#define DNET_INTERNAL_IGP_REG         0x8
+-#define DNET_INTERNAL_MAC_ADDR_0_REG  0xa
+-#define DNET_INTERNAL_MAC_ADDR_1_REG  0xc
+-#define DNET_INTERNAL_MAC_ADDR_2_REG  0xe
+-#define DNET_INTERNAL_TX_RX_STS_REG   0x12
+-#define DNET_INTERNAL_GMII_MNG_CTL_REG        0x14
+-#define DNET_INTERNAL_GMII_MNG_DAT_REG        0x16
+-
+-#define DNET_INTERNAL_GMII_MNG_CMD_FIN        (1 << 14)
+-
+-#define DNET_INTERNAL_WRITE           (1 << 31)
+-
+-/* MAC-CORE REGISTER FIELDS */
+-
+-/* MAC-CORE MODE REGISTER FIELDS */
+-#define DNET_INTERNAL_MODE_GBITEN                     (1 << 0)
+-#define DNET_INTERNAL_MODE_FCEN                               (1 << 1)
+-#define DNET_INTERNAL_MODE_RXEN                               (1 << 2)
+-#define DNET_INTERNAL_MODE_TXEN                               (1 << 3)
+-
+-/* MAC-CORE RXTX CONTROL REGISTER FIELDS */
+-#define DNET_INTERNAL_RXTX_CONTROL_RXSHORTFRAME               (1 << 8)
+-#define DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST                (1 << 7)
+-#define DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST                (1 << 4)
+-#define DNET_INTERNAL_RXTX_CONTROL_RXPAUSE            (1 << 3)
+-#define DNET_INTERNAL_RXTX_CONTROL_DISTXFCS           (1 << 2)
+-#define DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS          (1 << 1)
+-#define DNET_INTERNAL_RXTX_CONTROL_ENPROMISC          (1 << 0)
+-#define DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL                (1 << 6)
+-#define DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP      (1 << 5)
+-
+-/* SYSTEM CONTROL REGISTER FIELDS */
+-#define DNET_SYS_CTL_IGNORENEXTPKT                    (1 << 0)
+-#define DNET_SYS_CTL_SENDPAUSE                                (1 << 2)
+-#define DNET_SYS_CTL_RXFIFOFLUSH                      (1 << 3)
+-#define DNET_SYS_CTL_TXFIFOFLUSH                      (1 << 4)
+-
+-/* TX STATUS REGISTER FIELDS */
+-#define DNET_TX_STATUS_FIFO_ALMOST_EMPTY              (1 << 2)
+-#define DNET_TX_STATUS_FIFO_ALMOST_FULL                       (1 << 1)
+-
+-/* INTERRUPT SOURCE REGISTER FIELDS */
+-#define DNET_INTR_SRC_TX_PKTSENT                      (1 << 0)
+-#define DNET_INTR_SRC_TX_FIFOAF                               (1 << 1)
+-#define DNET_INTR_SRC_TX_FIFOAE                               (1 << 2)
+-#define DNET_INTR_SRC_TX_DISCFRM                      (1 << 3)
+-#define DNET_INTR_SRC_TX_FIFOFULL                     (1 << 4)
+-#define DNET_INTR_SRC_RX_CMDFIFOAF                    (1 << 8)
+-#define DNET_INTR_SRC_RX_CMDFIFOFF                    (1 << 9)
+-#define DNET_INTR_SRC_RX_DATAFIFOFF                   (1 << 10)
+-#define DNET_INTR_SRC_TX_SUMMARY                      (1 << 16)
+-#define DNET_INTR_SRC_RX_SUMMARY                      (1 << 17)
+-#define DNET_INTR_SRC_PHY                             (1 << 19)
+-
+-/* INTERRUPT ENABLE REGISTER FIELDS */
+-#define DNET_INTR_ENB_TX_PKTSENT                      (1 << 0)
+-#define DNET_INTR_ENB_TX_FIFOAF                               (1 << 1)
+-#define DNET_INTR_ENB_TX_FIFOAE                               (1 << 2)
+-#define DNET_INTR_ENB_TX_DISCFRM                      (1 << 3)
+-#define DNET_INTR_ENB_TX_FIFOFULL                     (1 << 4)
+-#define DNET_INTR_ENB_RX_PKTRDY                               (1 << 8)
+-#define DNET_INTR_ENB_RX_FIFOAF                               (1 << 9)
+-#define DNET_INTR_ENB_RX_FIFOERR                      (1 << 10)
+-#define DNET_INTR_ENB_RX_ERROR                                (1 << 11)
+-#define DNET_INTR_ENB_RX_FIFOFULL                     (1 << 12)
+-#define DNET_INTR_ENB_RX_FIFOAE                               (1 << 13)
+-#define DNET_INTR_ENB_TX_SUMMARY                      (1 << 16)
+-#define DNET_INTR_ENB_RX_SUMMARY                      (1 << 17)
+-#define DNET_INTR_ENB_GLOBAL_ENABLE                   (1 << 18)
+-
+-/* default values:
+- * almost empty = less than one full sized ethernet frame (no jumbo) inside
+- * the fifo almost full = can write less than one full sized ethernet frame
+- * (no jumbo) inside the fifo
+- */
+-#define DNET_CFG_TX_FIFO_FULL_THRES   25
+-#define DNET_CFG_RX_FIFO_FULL_THRES   20
+-
+-/*
+- * Capabilities. Used by the driver to know the capabilities that the ethernet
+- * controller inside the FPGA have.
+- */
+-
+-#define DNET_HAS_MDIO         (1 << 0)
+-#define DNET_HAS_IRQ          (1 << 1)
+-#define DNET_HAS_GIGABIT      (1 << 2)
+-#define DNET_HAS_DMA          (1 << 3)
+-
+-#define DNET_HAS_MII          (1 << 4) /* or GMII */
+-#define DNET_HAS_RMII         (1 << 5) /* or RGMII */
+-
+-#define DNET_CAPS_MASK                0xFFFF
+-
+-#define DNET_FIFO_SIZE                1024 /* 1K x 32 bit */
+-#define DNET_FIFO_TX_DATA_AF_TH       (DNET_FIFO_SIZE - 384) /* 384 = 1536 / 4 */
+-#define DNET_FIFO_TX_DATA_AE_TH       384
+-
+-#define DNET_FIFO_RX_CMD_AF_TH        (1 << 16) /* just one frame inside the FIFO */
+-
+-/*
+- * Hardware-collected statistics.
+- */
+-struct dnet_stats {
+-      u32 rx_pkt_ignr;
+-      u32 rx_len_chk_err;
+-      u32 rx_lng_frm;
+-      u32 rx_shrt_frm;
+-      u32 rx_ipg_viol;
+-      u32 rx_crc_err;
+-      u32 rx_ok_pkt;
+-      u32 rx_ctl_frm;
+-      u32 rx_pause_frm;
+-      u32 rx_multicast;
+-      u32 rx_broadcast;
+-      u32 rx_vlan_tag;
+-      u32 rx_pre_shrink;
+-      u32 rx_drib_nib;
+-      u32 rx_unsup_opcd;
+-      u32 rx_byte;
+-      u32 tx_unicast;
+-      u32 tx_pause_frm;
+-      u32 tx_multicast;
+-      u32 tx_brdcast;
+-      u32 tx_vlan_tag;
+-      u32 tx_bad_fcs;
+-      u32 tx_jumbo;
+-      u32 tx_byte;
+-};
+-
+-struct dnet {
+-      void __iomem                    *regs;
+-      spinlock_t                      lock;
+-      struct platform_device          *pdev;
+-      struct net_device               *dev;
+-      struct dnet_stats               hw_stats;
+-      unsigned int                    capabilities; /* read from FPGA */
+-      struct napi_struct              napi;
+-
+-      /* PHY stuff */
+-      struct mii_bus                  *mii_bus;
+-      struct phy_device               *phy_dev;
+-      unsigned int                    link;
+-      unsigned int                    speed;
+-      unsigned int                    duplex;
+-};
+-
+-#endif /* _DNET_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/e1000/e1000_main.c linux-2.6.29-rc3.owrt/drivers/net/e1000/e1000_main.c
+--- linux-2.6.29.owrt/drivers/net/e1000/e1000_main.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/e1000/e1000_main.c       2009-05-10 23:48:28.000000000 +0200
+@@ -31,7 +31,7 @@
+ char e1000_driver_name[] = "e1000";
+ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+-#define DRV_VERSION "7.3.21-k3-NAPI"
++#define DRV_VERSION "7.3.20-k3-NAPI"
+ const char e1000_driver_version[] = DRV_VERSION;
+ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+@@ -940,7 +940,7 @@
+               err = pci_enable_device(pdev);
+       } else {
+               bars = pci_select_bars(pdev, IORESOURCE_MEM);
+-              err = pci_enable_device_mem(pdev);
++              err = pci_enable_device(pdev);
+       }
+       if (err)
+               return err;
+@@ -3712,7 +3712,7 @@
+       struct e1000_hw *hw = &adapter->hw;
+       u32 rctl, icr = er32(ICR);
+-      if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
++      if (unlikely(!icr))
+               return IRQ_NONE;  /* Not our interrupt */
+       /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/forcedeth.c linux-2.6.29-rc3.owrt/drivers/net/forcedeth.c
+--- linux-2.6.29.owrt/drivers/net/forcedeth.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/forcedeth.c      2009-05-10 23:48:28.000000000 +0200
+@@ -6011,20 +6011,9 @@
+       if (netif_running(dev))
+               nv_close(dev);
+-      /*
+-       * Restore the MAC so a kernel started by kexec won't get confused.
+-       * If we really go for poweroff, we must not restore the MAC,
+-       * otherwise the MAC for WOL will be reversed at least on some boards.
+-       */
+-      if (system_state != SYSTEM_POWER_OFF) {
+-              nv_restore_mac_addr(pdev);
+-      }
++      nv_restore_mac_addr(pdev);
+       pci_disable_device(pdev);
+-      /*
+-       * Apparently it is not possible to reinitialise from D3 hot,
+-       * only put the device into D3 if we really go for poweroff.
+-       */
+       if (system_state == SYSTEM_POWER_OFF) {
+               if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
+                       pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/gianfar.c linux-2.6.29-rc3.owrt/drivers/net/gianfar.c
+--- linux-2.6.29.owrt/drivers/net/gianfar.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/gianfar.c        2009-05-10 23:48:28.000000000 +0200
+@@ -351,9 +351,6 @@
+       /* Reset MAC layer */
+       gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+-      /* We need to delay at least 3 TX clocks */
+-      udelay(2);
+-
+       tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
+       gfar_write(&priv->regs->maccfg1, tempval);
+@@ -1284,7 +1281,7 @@
+       spin_lock_irqsave(&priv->txlock, flags);
+       /* check if there is space to queue this packet */
+-      if ((nr_frags+1) > priv->num_txbdfree) {
++      if (nr_frags > priv->num_txbdfree) {
+               /* no space, stop the queue */
+               netif_stop_queue(dev);
+               dev->stats.tx_fifo_errors++;
+@@ -1629,12 +1626,6 @@
+       if (netif_rx_schedule_prep(&priv->napi)) {
+               gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
+               __netif_rx_schedule(&priv->napi);
+-      } else {
+-              /*
+-               * Clear IEVENT, so interrupts aren't called again
+-               * because of the packets that have already arrived.
+-               */
+-              gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+       }
+       spin_unlock(&priv->rxlock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/gianfar.h linux-2.6.29-rc3.owrt/drivers/net/gianfar.h
+--- linux-2.6.29.owrt/drivers/net/gianfar.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/gianfar.h        2009-05-10 23:48:28.000000000 +0200
+@@ -312,7 +312,7 @@
+ #define ATTRELI_EI(x) (x)
+ #define BD_LFLAG(flags) ((flags) << 16)
+-#define BD_LENGTH_MASK                0x0000ffff
++#define BD_LENGTH_MASK                0x00ff
+ /* TxBD status field bits */
+ #define TXBD_READY            0x8000
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/gianfar_mii.c linux-2.6.29-rc3.owrt/drivers/net/gianfar_mii.c
+--- linux-2.6.29.owrt/drivers/net/gianfar_mii.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/gianfar_mii.c    2009-05-10 23:48:28.000000000 +0200
+@@ -234,8 +234,6 @@
+       if (NULL == new_bus)
+               return -ENOMEM;
+-      device_init_wakeup(&ofdev->dev, 1);
+-
+       new_bus->name = "Gianfar MII Bus",
+       new_bus->read = &gfar_mdio_read,
+       new_bus->write = &gfar_mdio_write,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/hp-plus.c linux-2.6.29-rc3.owrt/drivers/net/hp-plus.c
+--- linux-2.6.29.owrt/drivers/net/hp-plus.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/hp-plus.c        2009-05-10 23:48:28.000000000 +0200
+@@ -467,7 +467,7 @@
+                       if (this_dev != 0) break; /* only autoprobe 1st one */
+                       printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
+               }
+-              dev = alloc_eip_netdev();
++              dev = alloc_ei_netdev();
+               if (!dev)
+                       break;
+               dev->irq = irq[this_dev];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ibm_newemac/core.c linux-2.6.29-rc3.owrt/drivers/net/ibm_newemac/core.c
+--- linux-2.6.29.owrt/drivers/net/ibm_newemac/core.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ibm_newemac/core.c       2009-05-10 23:48:28.000000000 +0200
+@@ -2594,9 +2594,6 @@
+               if (of_device_is_compatible(np, "ibm,emac-460ex") ||
+                   of_device_is_compatible(np, "ibm,emac-460gt"))
+                       dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
+-              if (of_device_is_compatible(np, "ibm,emac-405ex") ||
+-                  of_device_is_compatible(np, "ibm,emac-405exr"))
+-                      dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+       } else if (of_device_is_compatible(np, "ibm,emac4")) {
+               dev->features |= EMAC_FTR_EMAC4;
+               if (of_device_is_compatible(np, "ibm,emac-440gx"))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ibm_newemac/phy.c linux-2.6.29-rc3.owrt/drivers/net/ibm_newemac/phy.c
+--- linux-2.6.29.owrt/drivers/net/ibm_newemac/phy.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ibm_newemac/phy.c        2009-05-10 23:48:28.000000000 +0200
+@@ -60,7 +60,7 @@
+       udelay(300);
+-      while (--limit) {
++      while (limit--) {
+               val = phy_read(phy, MII_BMCR);
+               if (val >= 0 && (val & BMCR_RESET) == 0)
+                       break;
+@@ -84,7 +84,7 @@
+       udelay(300);
+-      while (--limit) {
++      while (limit--) {
+               val = gpcs_phy_read(phy, MII_BMCR);
+               if (val >= 0 && (val & BMCR_RESET) == 0)
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/igb/e1000_82575.c linux-2.6.29-rc3.owrt/drivers/net/igb/e1000_82575.c
+--- linux-2.6.29.owrt/drivers/net/igb/e1000_82575.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/igb/e1000_82575.c        2009-05-10 23:48:28.000000000 +0200
+@@ -699,18 +699,11 @@
+       /* SGMII link check is done through the PCS register. */
+       if ((hw->phy.media_type != e1000_media_type_copper) ||
+-          (igb_sgmii_active_82575(hw))) {
++          (igb_sgmii_active_82575(hw)))
+               ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+                                                            &duplex);
+-              /*
+-               * Use this flag to determine if link needs to be checked or
+-               * not.  If  we have link clear the flag so that we do not
+-               * continue to check for link.
+-               */
+-              hw->mac.get_link_status = !hw->mac.serdes_has_link;
+-      } else {
++      else
+               ret_val = igb_check_for_copper_link(hw);
+-      }
+       return ret_val;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/igb/igb.h linux-2.6.29-rc3.owrt/drivers/net/igb/igb.h
+--- linux-2.6.29.owrt/drivers/net/igb/igb.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/igb/igb.h        2009-05-10 23:48:28.000000000 +0200
+@@ -300,10 +300,11 @@
+ #define IGB_FLAG_HAS_MSI           (1 << 0)
+ #define IGB_FLAG_MSI_ENABLE        (1 << 1)
+-#define IGB_FLAG_DCA_ENABLED       (1 << 2)
+-#define IGB_FLAG_IN_NETPOLL        (1 << 3)
+-#define IGB_FLAG_QUAD_PORT_A       (1 << 4)
+-#define IGB_FLAG_NEED_CTX_IDX      (1 << 5)
++#define IGB_FLAG_HAS_DCA           (1 << 2)
++#define IGB_FLAG_DCA_ENABLED       (1 << 3)
++#define IGB_FLAG_IN_NETPOLL        (1 << 5)
++#define IGB_FLAG_QUAD_PORT_A       (1 << 6)
++#define IGB_FLAG_NEED_CTX_IDX      (1 << 7)
+ enum e1000_state_t {
+       __IGB_TESTING,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/igb/igb_main.c linux-2.6.29-rc3.owrt/drivers/net/igb/igb_main.c
+--- linux-2.6.29.owrt/drivers/net/igb/igb_main.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/igb/igb_main.c   2009-05-10 23:48:28.000000000 +0200
+@@ -206,11 +206,10 @@
+       global_quad_port_a = 0;
++      ret = pci_register_driver(&igb_driver);
+ #ifdef CONFIG_IGB_DCA
+       dca_register_notify(&dca_notifier);
+ #endif
+-
+-      ret = pci_register_driver(&igb_driver);
+       return ret;
+ }
+@@ -1023,10 +1022,11 @@
+       struct net_device *netdev;
+       struct igb_adapter *adapter;
+       struct e1000_hw *hw;
++      struct pci_dev *us_dev;
+       const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+       unsigned long mmio_start, mmio_len;
+-      int i, err, pci_using_dac;
+-      u16 eeprom_data = 0;
++      int i, err, pci_using_dac, pos;
++      u16 eeprom_data = 0, state = 0;
+       u16 eeprom_apme_mask = IGB_EEPROM_APME;
+       u32 part_num;
+       int bars, need_ioport;
+@@ -1061,6 +1061,27 @@
+               }
+       }
++      /* 82575 requires that the pci-e link partner disable the L0s state */
++      switch (pdev->device) {
++      case E1000_DEV_ID_82575EB_COPPER:
++      case E1000_DEV_ID_82575EB_FIBER_SERDES:
++      case E1000_DEV_ID_82575GB_QUAD_COPPER:
++              us_dev = pdev->bus->self;
++              pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
++              if (pos) {
++                      pci_read_config_word(us_dev, pos + PCI_EXP_LNKCTL,
++                                           &state);
++                      state &= ~PCIE_LINK_STATE_L0S;
++                      pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
++                                            state);
++                      dev_info(&pdev->dev,
++                               "Disabling ASPM L0s upstream switch port %s\n",
++                               pci_name(us_dev));
++              }
++      default:
++              break;
++      }
++
+       err = pci_request_selected_regions(pdev, bars, igb_driver_name);
+       if (err)
+               goto err_pci_reg;
+@@ -1135,10 +1156,11 @@
+       /* set flags */
+       switch (hw->mac.type) {
++      case e1000_82576:
+       case e1000_82575:
++              adapter->flags |= IGB_FLAG_HAS_DCA;
+               adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
+               break;
+-      case e1000_82576:
+       default:
+               break;
+       }
+@@ -1288,7 +1310,8 @@
+               goto err_register;
+ #ifdef CONFIG_IGB_DCA
+-      if (dca_add_requester(&pdev->dev) == 0) {
++      if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
++          (dca_add_requester(&pdev->dev) == 0)) {
+               adapter->flags |= IGB_FLAG_DCA_ENABLED;
+               dev_info(&pdev->dev, "DCA enabled\n");
+               /* Always use CB2 mode, difference is masked
+@@ -1812,11 +1835,11 @@
+       rctl |= E1000_RCTL_SECRC;
+       /*
+-       * disable store bad packets and clear size bits.
++       * disable store bad packets, long packet enable, and clear size bits.
+        */
+-      rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
++      rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256);
+-      /* enable LPE when to prevent packets larger than max_frame_size */
++      if (adapter->netdev->mtu > ETH_DATA_LEN)
+               rctl |= E1000_RCTL_LPE;
+       /* Setup buffer sizes */
+@@ -1842,7 +1865,7 @@
+        */
+       /* allocations using alloc_page take too long for regular MTU
+        * so only enable packet split for jumbo frames */
+-      if (adapter->netdev->mtu > ETH_DATA_LEN) {
++      if (rctl & E1000_RCTL_LPE) {
+               adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
+               srrctl |= adapter->rx_ps_hdr_size <<
+                        E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+@@ -3450,16 +3473,19 @@
+       struct e1000_hw *hw = &adapter->hw;
+       unsigned long event = *(unsigned long *)data;
++      if (!(adapter->flags & IGB_FLAG_HAS_DCA))
++              goto out;
++
+       switch (event) {
+       case DCA_PROVIDER_ADD:
+               /* if already enabled, don't do it again */
+               if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+                       break;
++              adapter->flags |= IGB_FLAG_DCA_ENABLED;
+               /* Always use CB2 mode, difference is masked
+                * in the CB driver. */
+               wr32(E1000_DCA_CTRL, 2);
+               if (dca_add_requester(dev) == 0) {
+-                      adapter->flags |= IGB_FLAG_DCA_ENABLED;
+                       dev_info(&adapter->pdev->dev, "DCA enabled\n");
+                       igb_setup_dca(adapter);
+                       break;
+@@ -3476,7 +3502,7 @@
+               }
+               break;
+       }
+-
++out:
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/irda/mcs7780.c linux-2.6.29-rc3.owrt/drivers/net/irda/mcs7780.c
+--- linux-2.6.29.owrt/drivers/net/irda/mcs7780.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/irda/mcs7780.c   2009-05-10 23:48:28.000000000 +0200
+@@ -585,7 +585,7 @@
+               mcs_get_reg(mcs, MCS_RESV_REG, &rval);
+       } while(cnt++ < 100 && (rval & MCS_IRINTX));
+-      if (cnt > 100) {
++      if(cnt >= 100) {
+               IRDA_ERROR("unable to change speed\n");
+               ret = -EIO;
+               goto error;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ixgbe/ixgbe_main.c linux-2.6.29-rc3.owrt/drivers/net/ixgbe/ixgbe_main.c
+--- linux-2.6.29.owrt/drivers/net/ixgbe/ixgbe_main.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ixgbe/ixgbe_main.c       2009-05-10 23:48:28.000000000 +0200
+@@ -3973,7 +3973,6 @@
+       .ndo_stop               = ixgbe_close,
+       .ndo_start_xmit         = ixgbe_xmit_frame,
+       .ndo_get_stats          = ixgbe_get_stats,
+-      .ndo_set_rx_mode        = ixgbe_set_rx_mode,
+       .ndo_set_multicast_list = ixgbe_set_rx_mode,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = ixgbe_set_mac,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/jme.c linux-2.6.29-rc3.owrt/drivers/net/jme.c
+--- linux-2.6.29.owrt/drivers/net/jme.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/jme.c    2009-05-10 23:48:28.000000000 +0200
+@@ -957,14 +957,13 @@
+               goto out_inc;
+       i = atomic_read(&rxring->next_to_clean);
+-      while (limit > 0) {
++      while (limit-- > 0) {
+               rxdesc = rxring->desc;
+               rxdesc += i;
+               if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
+               !(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
+                       goto out;
+-              --limit;
+               desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/Kconfig linux-2.6.29-rc3.owrt/drivers/net/Kconfig
+--- linux-2.6.29.owrt/drivers/net/Kconfig      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/Kconfig  2009-05-10 23:48:28.000000000 +0200
+@@ -1163,17 +1163,6 @@
+         To compile this driver as a module, choose M here. The module
+         will be called ni65.
+-config DNET
+-      tristate "Dave ethernet support (DNET)"
+-      depends on NET_ETHERNET && HAS_IOMEM
+-      select PHYLIB
+-      help
+-        The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+-        Say Y to include support for the DNET chip.
+-
+-        To compile this driver as a module, choose M here: the module
+-        will be called dnet.
+-
+ source "drivers/net/tulip/Kconfig"
+ config AT1700
+@@ -2476,17 +2465,6 @@
+         To compile this driver as a module, choose M here.  The module
+         will be called atl1e.
+-config ATL1C
+-      tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+-      depends on PCI && EXPERIMENTAL
+-      select CRC32
+-      select MII
+-      help
+-        This driver supports the Atheros L1C gigabit ethernet adapter.
+-
+-        To compile this driver as a module, choose M here.  The module
+-        will be called atl1c.
+-
+ config JME
+       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+       depends on PCI
+@@ -2753,8 +2731,6 @@
+ source "drivers/net/sfc/Kconfig"
+-source "drivers/net/benet/Kconfig"
+-
+ endif # NETDEV_10000
+ source "drivers/net/tokenring/Kconfig"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/Makefile linux-2.6.29-rc3.owrt/drivers/net/Makefile
+--- linux-2.6.29.owrt/drivers/net/Makefile     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/Makefile 2009-05-10 23:48:28.000000000 +0200
+@@ -17,12 +17,10 @@
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
+-obj-$(CONFIG_ATL1C) += atl1c/
+ obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+ obj-$(CONFIG_TEHUTI) += tehuti.o
+ obj-$(CONFIG_ENIC) += enic/
+ obj-$(CONFIG_JME) += jme.o
+-obj-$(CONFIG_BE2NET) += benet/
+ gianfar_driver-objs := gianfar.o \
+               gianfar_ethtool.o \
+@@ -233,7 +231,6 @@
+ obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
+-obj-$(CONFIG_DNET) += dnet.o
+ obj-$(CONFIG_MACB) += macb.o
+ obj-$(CONFIG_ARM) += arm/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/mv643xx_eth.c linux-2.6.29-rc3.owrt/drivers/net/mv643xx_eth.c
+--- linux-2.6.29.owrt/drivers/net/mv643xx_eth.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/mv643xx_eth.c    2009-05-10 23:48:28.000000000 +0200
+@@ -1175,7 +1175,7 @@
+ {
+       struct mib_counters *p = &mp->mib_counters;
+-      spin_lock_bh(&mp->mib_counters_lock);
++      spin_lock(&mp->mib_counters_lock);
+       p->good_octets_received += mib_read(mp, 0x00);
+       p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
+       p->bad_octets_received += mib_read(mp, 0x08);
+@@ -1208,7 +1208,7 @@
+       p->bad_crc_event += mib_read(mp, 0x74);
+       p->collision += mib_read(mp, 0x78);
+       p->late_collision += mib_read(mp, 0x7c);
+-      spin_unlock_bh(&mp->mib_counters_lock);
++      spin_unlock(&mp->mib_counters_lock);
+       mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ);
+ }
+@@ -1575,7 +1575,7 @@
+               return;
+       }
+-      mc_spec = kmalloc(0x200, GFP_ATOMIC);
++      mc_spec = kmalloc(0x200, GFP_KERNEL);
+       if (mc_spec == NULL)
+               goto oom;
+       mc_other = mc_spec + (0x100 >> 2);
+@@ -2030,6 +2030,11 @@
+       }
+       /*
++       * Add configured unicast address to address filter table.
++       */
++      mv643xx_eth_program_unicast_filter(mp->dev);
++
++      /*
+        * Receive all unmatched unicast, TCP, UDP, BPDU and broadcast
+        * frames to RX queue #0, and include the pseudo-header when
+        * calculating receive checksums.
+@@ -2042,11 +2047,6 @@
+       wrlp(mp, PORT_CONFIG_EXT, 0x00000000);
+       /*
+-       * Add configured unicast addresses to address filter table.
+-       */
+-      mv643xx_eth_program_unicast_filter(mp->dev);
+-
+-      /*
+        * Enable the receive queues.
+        */
+       for (i = 0; i < mp->rxq_count; i++) {
+@@ -2216,6 +2216,8 @@
+       wrlp(mp, INT_MASK, 0x00000000);
+       rdlp(mp, INT_MASK);
++      del_timer_sync(&mp->mib_counters_timer);
++
+       napi_disable(&mp->napi);
+       del_timer_sync(&mp->rx_oom);
+@@ -2227,7 +2229,6 @@
+       port_reset(mp);
+       mv643xx_eth_get_stats(dev);
+       mib_counters_update(mp);
+-      del_timer_sync(&mp->mib_counters_timer);
+       skb_queue_purge(&mp->rx_recycle);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/netxen/netxen_nic.h linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic.h
+--- linux-2.6.29.owrt/drivers/net/netxen/netxen_nic.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic.h      2009-05-10 23:48:29.000000000 +0200
+@@ -210,7 +210,7 @@
+ #define MAX_CMD_DESCRIPTORS_HOST      1024
+ #define MAX_RCV_DESCRIPTORS_1G                2048
+ #define MAX_RCV_DESCRIPTORS_10G               4096
+-#define MAX_JUMBO_RCV_DESCRIPTORS     1024
++#define MAX_JUMBO_RCV_DESCRIPTORS     512
+ #define MAX_LRO_RCV_DESCRIPTORS               8
+ #define MAX_RCVSTATUS_DESCRIPTORS     MAX_RCV_DESCRIPTORS
+ #define MAX_JUMBO_RCV_DESC    MAX_JUMBO_RCV_DESCRIPTORS
+@@ -1203,7 +1203,7 @@
+ #define NETXEN_IS_MSI_FAMILY(adapter) \
+       ((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
+-#define MSIX_ENTRIES_PER_ADAPTER      1
++#define MSIX_ENTRIES_PER_ADAPTER      8
+ #define NETXEN_MSIX_TBL_SPACE         8192
+ #define NETXEN_PCI_REG_MSIX_TBL               0x44
+@@ -1595,6 +1595,7 @@
+ }
++int netxen_is_flash_supported(struct netxen_adapter *adapter);
+ int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+ int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+ extern void netxen_change_ringparam(struct netxen_adapter *adapter);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_hw.c linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_hw.c
+--- linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_hw.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_hw.c   2009-05-10 23:48:29.000000000 +0200
+@@ -706,6 +706,28 @@
+       return rc;
+ }
++int netxen_is_flash_supported(struct netxen_adapter *adapter)
++{
++      const int locs[] = { 0, 0x4, 0x100, 0x4000, 0x4128 };
++      int addr, val01, val02, i, j;
++
++      /* if the flash size less than 4Mb, make huge war cry and die */
++      for (j = 1; j < 4; j++) {
++              addr = j * NETXEN_NIC_WINDOW_MARGIN;
++              for (i = 0; i < ARRAY_SIZE(locs); i++) {
++                      if (netxen_rom_fast_read(adapter, locs[i], &val01) == 0
++                          && netxen_rom_fast_read(adapter, (addr + locs[i]),
++                                                  &val02) == 0) {
++                              if (val01 == val02)
++                                      return -1;
++                      } else
++                              return -1;
++              }
++      }
++
++      return 0;
++}
++
+ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
+                                 int size, __le32 * buf)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_init.c linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_init.c
+--- linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_init.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_init.c 2009-05-10 23:48:29.000000000 +0200
+@@ -947,10 +947,8 @@
+       }
+       for (i = 0; i < n; i++) {
+               if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
+-              netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
+-                      kfree(buf);
++              netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0)
+                       return -EIO;
+-              }
+               buf[i].addr = addr;
+               buf[i].data = val;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_main.c linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_main.c
+--- linux-2.6.29.owrt/drivers/net/netxen/netxen_nic_main.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/netxen/netxen_nic_main.c 2009-05-10 23:48:29.000000000 +0200
+@@ -76,7 +76,6 @@
+ #endif
+ static irqreturn_t netxen_intr(int irq, void *data);
+ static irqreturn_t netxen_msi_intr(int irq, void *data);
+-static irqreturn_t netxen_msix_intr(int irq, void *data);
+ /*  PCI Device ID Table  */
+ #define ENTRY(device) \
+@@ -201,9 +200,9 @@
+               adapter->pci_using_dac = 1;
+               return 0;
+       }
+-set_32_bit_mask:
+ #endif /* CONFIG_IA64 */
++set_32_bit_mask:
+       err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+       if (!err)
+               err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+@@ -372,6 +371,67 @@
+       }
+ }
++#define PCI_CAP_ID_GEN  0x10
++
++static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
++{
++      u32 pdevfuncsave;
++      u32 c8c9value = 0;
++      u32 chicken = 0;
++      u32 control = 0;
++      int i, pos;
++      struct pci_dev *pdev;
++
++      pdev = adapter->pdev;
++
++      adapter->hw_read_wx(adapter,
++              NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
++      /* clear chicken3.25:24 */
++      chicken &= 0xFCFFFFFF;
++      /*
++       * if gen1 and B0, set F1020 - if gen 2, do nothing
++       * if gen2 set to F1000
++       */
++      pos = pci_find_capability(pdev, PCI_CAP_ID_GEN);
++      if (pos == 0xC0) {
++              pci_read_config_dword(pdev, pos + 0x10, &control);
++              if ((control & 0x000F0000) != 0x00020000) {
++                      /*  set chicken3.24 if gen1 */
++                      chicken |= 0x01000000;
++              }
++              printk(KERN_INFO "%s Gen2 strapping detected\n",
++                              netxen_nic_driver_name);
++              c8c9value = 0xF1000;
++      } else {
++              /* set chicken3.24 if gen1 */
++              chicken |= 0x01000000;
++              printk(KERN_INFO "%s Gen1 strapping detected\n",
++                              netxen_nic_driver_name);
++              if (adapter->ahw.revision_id == NX_P3_B0)
++                      c8c9value = 0xF1020;
++              else
++                      c8c9value = 0;
++
++      }
++      adapter->hw_write_wx(adapter,
++              NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
++
++      if (!c8c9value)
++              return;
++
++      pdevfuncsave = pdev->devfn;
++      if (pdevfuncsave & 0x07)
++              return;
++
++      for (i = 0; i < 8; i++) {
++              pci_read_config_dword(pdev, pos + 8, &control);
++              pci_read_config_dword(pdev, pos + 8, &control);
++              pci_write_config_dword(pdev, pos + 8, c8c9value);
++              pdev->devfn++;
++      }
++      pdev->devfn = pdevfuncsave;
++}
++
+ static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
+ {
+       u32 control;
+@@ -405,6 +465,9 @@
+       struct net_device *netdev = adapter->netdev;
+       struct pci_dev *pdev = adapter->pdev;
++      if (netxen_is_flash_supported(adapter) != 0)
++              return -EIO;
++
+       if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+               if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
+                       return -EIO;
+@@ -585,12 +648,7 @@
+               adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
+               adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
+-              mem_ptr0 = pci_ioremap_bar(pdev, 0);
+-              if (mem_ptr0 == NULL) {
+-                      dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+-                      return -EIO;
+-              }
+-
++              mem_ptr0 = ioremap(mem_base, mem_len);
+               pci_len0 = mem_len;
+               first_page_group_start = 0;
+               first_page_group_end   = 0;
+@@ -753,6 +811,9 @@
+               }
+               netxen_load_firmware(adapter);
++              if (NX_IS_REVISION_P3(revision_id))
++                      netxen_pcie_strap_init(adapter);
++
+               if (NX_IS_REVISION_P2(revision_id)) {
+                       /* Initialize multicast addr pool owners */
+@@ -797,12 +858,9 @@
+        * See if the firmware gave us a virtual-physical port mapping.
+        */
+       adapter->physical_port = adapter->portnum;
+-      if (adapter->fw_major < 4) {
+-              i = adapter->pci_read_normalize(adapter,
+-                              CRB_V2P(adapter->portnum));
+-              if (i != 0x55555555)
+-                      adapter->physical_port = i;
+-      }
++      i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
++      if (i != 0x55555555)
++              adapter->physical_port = i;
+       adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
+@@ -1026,9 +1084,7 @@
+                       for (ring = 0; ring < adapter->max_rds_rings; ring++)
+                               netxen_post_rx_buffers(adapter, ctx, ring);
+               }
+-              if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
+-                      handler = netxen_msix_intr;
+-              else if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
++              if (NETXEN_IS_MSI_FAMILY(adapter))
+                       handler = netxen_msi_intr;
+               else {
+                       flags |= IRQF_SHARED;
+@@ -1556,14 +1612,6 @@
+       return IRQ_HANDLED;
+ }
+-static irqreturn_t netxen_msix_intr(int irq, void *data)
+-{
+-      struct netxen_adapter *adapter = data;
+-
+-      napi_schedule(&adapter->napi);
+-      return IRQ_HANDLED;
+-}
+-
+ static int netxen_nic_poll(struct napi_struct *napi, int budget)
+ {
+       struct netxen_adapter *adapter = container_of(napi, struct netxen_adapter, napi);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/pcmcia/3c574_cs.c linux-2.6.29-rc3.owrt/drivers/net/pcmcia/3c574_cs.c
+--- linux-2.6.29.owrt/drivers/net/pcmcia/3c574_cs.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/pcmcia/3c574_cs.c        2009-05-10 23:48:29.000000000 +0200
+@@ -1035,8 +1035,7 @@
+       DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+                 dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
+       while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
+-                      worklimit > 0) {
+-              worklimit--;
++                 (--worklimit >= 0)) {
+               if (rx_status & 0x4000) { /* Error, update stats. */
+                       short error = rx_status & 0x3800;
+                       dev->stats.rx_errors++;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/pcmcia/3c589_cs.c linux-2.6.29-rc3.owrt/drivers/net/pcmcia/3c589_cs.c
+--- linux-2.6.29.owrt/drivers/net/pcmcia/3c589_cs.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/pcmcia/3c589_cs.c        2009-05-10 23:48:29.000000000 +0200
+@@ -857,8 +857,7 @@
+     DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+         dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+     while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
+-                  worklimit > 0) {
+-      worklimit--;
++         (--worklimit >= 0)) {
+       if (rx_status & 0x4000) { /* Error, update stats. */
+           short error = rx_status & 0x3800;
+           dev->stats.rx_errors++;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/pcmcia/pcnet_cs.c linux-2.6.29-rc3.owrt/drivers/net/pcmcia/pcnet_cs.c
+--- linux-2.6.29.owrt/drivers/net/pcmcia/pcnet_cs.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/pcmcia/pcnet_cs.c        2009-05-10 23:48:29.000000000 +0200
+@@ -586,7 +586,7 @@
+     }
+     if ((link->conf.ConfigBase == 0x03c0)
+-      && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
++      && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
+       printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
+       printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
+       goto failed;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/phy/mdio-gpio.c linux-2.6.29-rc3.owrt/drivers/net/phy/mdio-gpio.c
+--- linux-2.6.29.owrt/drivers/net/phy/mdio-gpio.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/phy/mdio-gpio.c  2009-05-10 23:48:29.000000000 +0200
+@@ -125,8 +125,6 @@
+       if (gpio_request(bitbang->mdio, "mdio"))
+               goto out_free_mdc;
+-      gpio_direction_output(bitbang->mdc, 0);
+-
+       dev_set_drvdata(dev, new_bus);
+       ret = mdiobus_register(new_bus);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ps3_gelic_wireless.c linux-2.6.29-rc3.owrt/drivers/net/ps3_gelic_wireless.c
+--- linux-2.6.29.owrt/drivers/net/ps3_gelic_wireless.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ps3_gelic_wireless.c     2009-05-10 23:48:29.000000000 +0200
+@@ -2168,7 +2168,7 @@
+               complete(&wl->assoc_done);
+               netif_carrier_on(port_to_netdev(wl_port(wl)));
+       } else
+-              pr_debug("%s: event %#llx under wpa\n",
++              pr_debug("%s: event %#lx under wpa\n",
+                                __func__, event);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/qlge/qlge.h linux-2.6.29-rc3.owrt/drivers/net/qlge/qlge.h
+--- linux-2.6.29.owrt/drivers/net/qlge/qlge.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/qlge/qlge.h      2009-05-10 23:48:29.000000000 +0200
+@@ -787,12 +787,12 @@
+ struct flash_params {
+       u8 dev_id_str[4];
+-      __le16 size;
+-      __le16 csum;
+-      __le16 ver;
+-      __le16 sub_dev_id;
++      u16 size;
++      u16 csum;
++      u16 ver;
++      u16 sub_dev_id;
+       u8 mac_addr[6];
+-      __le16 res;
++      u16 res;
+ };
+@@ -927,7 +927,6 @@
+       u8 flags1;
+ #define IB_MAC_IOCB_RSP_OI    0x01    /* Overide intr delay */
+ #define IB_MAC_IOCB_RSP_I     0x02    /* Disble Intr Generation */
+-#define IB_MAC_CSUM_ERR_MASK 0x1c     /* A mask to use for csum errs */
+ #define IB_MAC_IOCB_RSP_TE    0x04    /* Checksum error */
+ #define IB_MAC_IOCB_RSP_NU    0x08    /* No checksum rcvd */
+ #define IB_MAC_IOCB_RSP_IE    0x10    /* IPv4 checksum error */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/qlge/qlge_main.c linux-2.6.29-rc3.owrt/drivers/net/qlge/qlge_main.c
+--- linux-2.6.29.owrt/drivers/net/qlge/qlge_main.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/qlge/qlge_main.c 2009-05-10 23:48:29.000000000 +0200
+@@ -641,7 +641,7 @@
+ }
+-static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
++static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data)
+ {
+       int status = 0;
+       /* wait for reg to come ready */
+@@ -656,11 +656,8 @@
+                       FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
+       if (status)
+               goto exit;
+-       /* This data is stored on flash as an array of
+-       * __le32.  Since ql_read32() returns cpu endian
+-       * we need to swap it back.
+-       */
+-      *data = cpu_to_le32(ql_read32(qdev, FLASH_DATA));
++      /* get the data */
++      *data = ql_read32(qdev, FLASH_DATA);
+ exit:
+       return status;
+ }
+@@ -669,20 +666,13 @@
+ {
+       int i;
+       int status;
+-      __le32 *p = (__le32 *)&qdev->flash;
+-      u32 offset = 0;
+-
+-      /* Second function's parameters follow the first
+-       * function's.
+-       */
+-      if (qdev->func)
+-              offset = sizeof(qdev->flash) / sizeof(u32);
++      u32 *p = (u32 *)&qdev->flash;
+       if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
+               return -ETIMEDOUT;
+       for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) {
+-              status = ql_read_flash_word(qdev, i+offset, p);
++              status = ql_read_flash_word(qdev, i, p);
+               if (status) {
+                       QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
+                       goto exit;
+@@ -898,7 +888,6 @@
+                                       lbq_desc->index);
+                               lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC);
+                               if (lbq_desc->p.lbq_page == NULL) {
+-                                      rx_ring->lbq_clean_idx = clean_idx;
+                                       QPRINTK(qdev, RX_STATUS, ERR,
+                                               "Couldn't get a page.\n");
+                                       return;
+@@ -908,9 +897,6 @@
+                                                  0, PAGE_SIZE,
+                                                  PCI_DMA_FROMDEVICE);
+                               if (pci_dma_mapping_error(qdev->pdev, map)) {
+-                                      rx_ring->lbq_clean_idx = clean_idx;
+-                                      put_page(lbq_desc->p.lbq_page);
+-                                      lbq_desc->p.lbq_page = NULL;
+                                       QPRINTK(qdev, RX_STATUS, ERR,
+                                               "PCI mapping failed.\n");
+                                       return;
+@@ -972,8 +958,6 @@
+                               if (pci_dma_mapping_error(qdev->pdev, map)) {
+                                       QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n");
+                                       rx_ring->sbq_clean_idx = clean_idx;
+-                                      dev_kfree_skb_any(sbq_desc->p.skb);
+-                                      sbq_desc->p.skb = NULL;
+                                       return;
+                               }
+                               pci_unmap_addr_set(sbq_desc, mapaddr, map);
+@@ -1436,32 +1420,18 @@
+       if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
+               QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
+       }
+-
+-      skb->protocol = eth_type_trans(skb, ndev);
+-      skb->ip_summed = CHECKSUM_NONE;
+-
+-      /* If rx checksum is on, and there are no
+-       * csum or frame errors.
+-       */
+-      if (qdev->rx_csum &&
+-              !(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
+-              !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+-              /* TCP frame. */
+-              if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+-                      QPRINTK(qdev, RX_STATUS, DEBUG,
+-                                      "TCP checksum done!\n");
+-                      skb->ip_summed = CHECKSUM_UNNECESSARY;
+-              } else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+-                              (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+-              /* Unfragmented ipv4 UDP frame. */
+-                      struct iphdr *iph = (struct iphdr *) skb->data;
+-                      if (!(iph->frag_off &
+-                              cpu_to_be16(IP_MF|IP_OFFSET))) {
+-                              skb->ip_summed = CHECKSUM_UNNECESSARY;
+-                              QPRINTK(qdev, RX_STATUS, DEBUG,
+-                                              "TCP checksum done!\n");
+-                      }
+-              }
++      if (ib_mac_rsp->flags1 & (IB_MAC_IOCB_RSP_IE | IB_MAC_IOCB_RSP_TE)) {
++              QPRINTK(qdev, RX_STATUS, ERR,
++                      "Bad checksum for this %s packet.\n",
++                      ((ib_mac_rsp->
++                        flags2 & IB_MAC_IOCB_RSP_T) ? "TCP" : "UDP"));
++              skb->ip_summed = CHECKSUM_NONE;
++      } else if (qdev->rx_csum &&
++                 ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) ||
++                  ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
++                   !(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU)))) {
++              QPRINTK(qdev, RX_STATUS, DEBUG, "RX checksum done!\n");
++              skb->ip_summed = CHECKSUM_UNNECESSARY;
+       }
+       qdev->stats.rx_packets++;
+       qdev->stats.rx_bytes += skb->len;
+@@ -1469,12 +1439,12 @@
+       if (qdev->vlgrp && (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V)) {
+               QPRINTK(qdev, RX_STATUS, DEBUG,
+                       "Passing a VLAN packet upstream.\n");
+-              vlan_hwaccel_receive_skb(skb, qdev->vlgrp,
++              vlan_hwaccel_rx(skb, qdev->vlgrp,
+                               le16_to_cpu(ib_mac_rsp->vlan_id));
+       } else {
+               QPRINTK(qdev, RX_STATUS, DEBUG,
+                       "Passing a normal packet upstream.\n");
+-              netif_receive_skb(skb);
++              netif_rx(skb);
+       }
+ }
+@@ -1531,11 +1501,6 @@
+       netif_stop_queue(qdev->ndev);
+       netif_carrier_off(qdev->ndev);
+       ql_disable_interrupts(qdev);
+-      /* Clear adapter up bit to signal the recovery
+-       * process that it shouldn't kill the reset worker
+-       * thread
+-       */
+-      clear_bit(QL_ADAPTER_UP, &qdev->flags);
+       queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
+ }
+@@ -1941,9 +1906,6 @@
+       tx_ring = &qdev->tx_ring[tx_ring_idx];
+-      if (skb_padto(skb, ETH_ZLEN))
+-              return NETDEV_TX_OK;
+-
+       if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
+               QPRINTK(qdev, TX_QUEUED, INFO,
+                       "%s: shutting down tx queue %d du to lack of resources.\n",
+@@ -1955,6 +1917,10 @@
+       tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
+       mac_iocb_ptr = tx_ring_desc->queue_entry;
+       memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
++      if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) != NETDEV_TX_OK) {
++              QPRINTK(qdev, TX_QUEUED, ERR, "Could not map the segments.\n");
++              return NETDEV_TX_BUSY;
++      }
+       mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
+       mac_iocb_ptr->tid = tx_ring_desc->index;
+@@ -1980,12 +1946,6 @@
+               ql_hw_csum_setup(skb,
+                                (struct ob_mac_tso_iocb_req *)mac_iocb_ptr);
+       }
+-      if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) !=
+-                      NETDEV_TX_OK) {
+-              QPRINTK(qdev, TX_QUEUED, ERR,
+-                              "Could not map the segments.\n");
+-              return NETDEV_TX_BUSY;
+-      }
+       QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr);
+       tx_ring->prod_idx++;
+       if (tx_ring->prod_idx == tx_ring->wq_len)
+@@ -2903,8 +2863,8 @@
+       /*
+        * Fill out the Indirection Table.
+        */
+-      for (i = 0; i < 256; i++)
+-              hash_id[i] = i & (qdev->rss_ring_count - 1);
++      for (i = 0; i < 32; i++)
++              hash_id[i] = i & 1;
+       /*
+        * Random values for the IPv6 and IPv4 Hash Keys.
+@@ -2987,9 +2947,9 @@
+       mask = value << 16;
+       ql_write32(qdev, SYS, mask | value);
+-      /* Set the default queue, and VLAN behavior. */
+-      value = NIC_RCV_CFG_DFQ | NIC_RCV_CFG_RV;
+-      mask = NIC_RCV_CFG_DFQ_MASK | (NIC_RCV_CFG_RV << 16);
++      /* Set the default queue. */
++      value = NIC_RCV_CFG_DFQ;
++      mask = NIC_RCV_CFG_DFQ_MASK;
+       ql_write32(qdev, NIC_RCV_CFG, (mask | value));
+       /* Set the MPI interrupt to enabled. */
+@@ -3130,11 +3090,7 @@
+       netif_stop_queue(ndev);
+       netif_carrier_off(ndev);
+-      /* Don't kill the reset worker thread if we
+-       * are in the process of recovery.
+-       */
+-      if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+-              cancel_delayed_work_sync(&qdev->asic_reset_work);
++      cancel_delayed_work_sync(&qdev->asic_reset_work);
+       cancel_delayed_work_sync(&qdev->mpi_reset_work);
+       cancel_delayed_work_sync(&qdev->mpi_work);
+@@ -3166,11 +3122,6 @@
+       ql_tx_ring_clean(qdev);
+-      /* Call netif_napi_del() from common point.
+-       */
+-      for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+-              netif_napi_del(&qdev->rx_ring[i].napi);
+-
+       spin_lock(&qdev->hw_lock);
+       status = ql_adapter_reset(qdev);
+       if (status)
+@@ -3540,7 +3491,7 @@
+ static void qlge_tx_timeout(struct net_device *ndev)
+ {
+       struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
+-      ql_queue_asic_error(qdev);
++      queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
+ }
+ static void ql_asic_reset_work(struct work_struct *work)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/r6040.c linux-2.6.29-rc3.owrt/drivers/net/r6040.c
+--- linux-2.6.29.owrt/drivers/net/r6040.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/r6040.c  2009-05-10 23:48:29.000000000 +0200
+@@ -438,6 +438,7 @@
+ {
+       struct r6040_private *lp = netdev_priv(dev);
+       void __iomem *ioaddr = lp->base;
++      struct pci_dev *pdev = lp->pdev;
+       int limit = 2048;
+       u16 *adrp;
+       u16 cmd;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/r8169.c linux-2.6.29-rc3.owrt/drivers/net/r8169.c
+--- linux-2.6.29.owrt/drivers/net/r8169.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/r8169.c  2009-05-10 23:48:29.000000000 +0200
+@@ -437,22 +437,6 @@
+       RTL_FEATURE_GMII        = (1 << 2),
+ };
+-struct rtl8169_counters {
+-      __le64  tx_packets;
+-      __le64  rx_packets;
+-      __le64  tx_errors;
+-      __le32  rx_errors;
+-      __le16  rx_missed;
+-      __le16  align_errors;
+-      __le32  tx_one_collision;
+-      __le32  tx_multi_collision;
+-      __le64  rx_unicast;
+-      __le64  rx_broadcast;
+-      __le32  rx_multicast;
+-      __le16  tx_aborted;
+-      __le16  tx_underun;
+-};
+-
+ struct rtl8169_private {
+       void __iomem *mmio_addr;        /* memory map physical address */
+       struct pci_dev *pci_dev;        /* Index of PCI device */
+@@ -496,7 +480,6 @@
+       unsigned features;
+       struct mii_if_info mii;
+-      struct rtl8169_counters counters;
+ };
+ MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
+@@ -1117,6 +1100,22 @@
+       "tx_underrun",
+ };
++struct rtl8169_counters {
++      __le64  tx_packets;
++      __le64  rx_packets;
++      __le64  tx_errors;
++      __le32  rx_errors;
++      __le16  rx_missed;
++      __le16  align_errors;
++      __le32  tx_one_collision;
++      __le32  tx_multi_collision;
++      __le64  rx_unicast;
++      __le64  rx_broadcast;
++      __le32  rx_multicast;
++      __le16  tx_aborted;
++      __le16  tx_underun;
++};
++
+ static int rtl8169_get_sset_count(struct net_device *dev, int sset)
+ {
+       switch (sset) {
+@@ -1127,21 +1126,16 @@
+       }
+ }
+-static void rtl8169_update_counters(struct net_device *dev)
++static void rtl8169_get_ethtool_stats(struct net_device *dev,
++                                    struct ethtool_stats *stats, u64 *data)
+ {
+       struct rtl8169_private *tp = netdev_priv(dev);
+       void __iomem *ioaddr = tp->mmio_addr;
+       struct rtl8169_counters *counters;
+       dma_addr_t paddr;
+       u32 cmd;
+-      int wait = 1000;
+-      /*
+-       * Some chips are unable to dump tally counters when the receiver
+-       * is disabled.
+-       */
+-      if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
+-              return;
++      ASSERT_RTNL();
+       counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+       if (!counters)
+@@ -1152,43 +1146,29 @@
+       RTL_W32(CounterAddrLow, cmd);
+       RTL_W32(CounterAddrLow, cmd | CounterDump);
+-      while (wait--) {
+-              if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
+-                      /* copy updated counters */
+-                      memcpy(&tp->counters, counters, sizeof(*counters));
++      while (RTL_R32(CounterAddrLow) & CounterDump) {
++              if (msleep_interruptible(1))
+                       break;
+-              }
+-              udelay(10);
+       }
+       RTL_W32(CounterAddrLow, 0);
+       RTL_W32(CounterAddrHigh, 0);
+-      pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+-}
++      data[0] = le64_to_cpu(counters->tx_packets);
++      data[1] = le64_to_cpu(counters->rx_packets);
++      data[2] = le64_to_cpu(counters->tx_errors);
++      data[3] = le32_to_cpu(counters->rx_errors);
++      data[4] = le16_to_cpu(counters->rx_missed);
++      data[5] = le16_to_cpu(counters->align_errors);
++      data[6] = le32_to_cpu(counters->tx_one_collision);
++      data[7] = le32_to_cpu(counters->tx_multi_collision);
++      data[8] = le64_to_cpu(counters->rx_unicast);
++      data[9] = le64_to_cpu(counters->rx_broadcast);
++      data[10] = le32_to_cpu(counters->rx_multicast);
++      data[11] = le16_to_cpu(counters->tx_aborted);
++      data[12] = le16_to_cpu(counters->tx_underun);
+-static void rtl8169_get_ethtool_stats(struct net_device *dev,
+-                                    struct ethtool_stats *stats, u64 *data)
+-{
+-      struct rtl8169_private *tp = netdev_priv(dev);
+-
+-      ASSERT_RTNL();
+-
+-      rtl8169_update_counters(dev);
+-
+-      data[0] = le64_to_cpu(tp->counters.tx_packets);
+-      data[1] = le64_to_cpu(tp->counters.rx_packets);
+-      data[2] = le64_to_cpu(tp->counters.tx_errors);
+-      data[3] = le32_to_cpu(tp->counters.rx_errors);
+-      data[4] = le16_to_cpu(tp->counters.rx_missed);
+-      data[5] = le16_to_cpu(tp->counters.align_errors);
+-      data[6] = le32_to_cpu(tp->counters.tx_one_collision);
+-      data[7] = le32_to_cpu(tp->counters.tx_multi_collision);
+-      data[8] = le64_to_cpu(tp->counters.rx_unicast);
+-      data[9] = le64_to_cpu(tp->counters.rx_broadcast);
+-      data[10] = le32_to_cpu(tp->counters.rx_multicast);
+-      data[11] = le16_to_cpu(tp->counters.tx_aborted);
+-      data[12] = le16_to_cpu(tp->counters.tx_underun);
++      pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+ }
+ static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+@@ -3253,6 +3233,13 @@
+               opts1 |= FirstFrag;
+       } else {
+               len = skb->len;
++
++              if (unlikely(len < ETH_ZLEN)) {
++                      if (skb_padto(skb, ETH_ZLEN))
++                              goto err_update_stats;
++                      len = ETH_ZLEN;
++              }
++
+               opts1 |= FirstFrag | LastFrag;
+               tp->tx_skb[entry].skb = skb;
+       }
+@@ -3290,6 +3277,7 @@
+ err_stop:
+       netif_stop_queue(dev);
+       ret = NETDEV_TX_BUSY;
++err_update_stats:
+       dev->stats.tx_dropped++;
+       goto out;
+ }
+@@ -3696,9 +3684,6 @@
+       struct rtl8169_private *tp = netdev_priv(dev);
+       struct pci_dev *pdev = tp->pci_dev;
+-      /* update counters before going down */
+-      rtl8169_update_counters(dev);
+-
+       rtl8169_down(dev);
+       free_irq(dev->irq, dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/efx.c linux-2.6.29-rc3.owrt/drivers/net/sfc/efx.c
+--- linux-2.6.29.owrt/drivers/net/sfc/efx.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/efx.c        2009-05-10 23:48:29.000000000 +0200
+@@ -676,8 +676,9 @@
+       rc = efx->phy_op->init(efx);
+       if (rc)
+               return rc;
+-      mutex_lock(&efx->mac_lock);
+       efx->phy_op->reconfigure(efx);
++
++      mutex_lock(&efx->mac_lock);
+       rc = falcon_switch_mac(efx);
+       mutex_unlock(&efx->mac_lock);
+       if (rc)
+@@ -685,7 +686,7 @@
+       efx->mac_op->reconfigure(efx);
+       efx->port_initialized = true;
+-      efx_stats_enable(efx);
++      efx->stats_enabled = true;
+       return 0;
+ fail:
+@@ -734,7 +735,6 @@
+       if (!efx->port_initialized)
+               return;
+-      efx_stats_disable(efx);
+       efx->phy_op->fini(efx);
+       efx->port_initialized = false;
+@@ -1361,20 +1361,6 @@
+       return 0;
+ }
+-void efx_stats_disable(struct efx_nic *efx)
+-{
+-      spin_lock(&efx->stats_lock);
+-      ++efx->stats_disable_count;
+-      spin_unlock(&efx->stats_lock);
+-}
+-
+-void efx_stats_enable(struct efx_nic *efx)
+-{
+-      spin_lock(&efx->stats_lock);
+-      --efx->stats_disable_count;
+-      spin_unlock(&efx->stats_lock);
+-}
+-
+ /* Context: process, dev_base_lock or RTNL held, non-blocking. */
+ static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
+ {
+@@ -1383,12 +1369,12 @@
+       struct net_device_stats *stats = &net_dev->stats;
+       /* Update stats if possible, but do not wait if another thread
+-       * is updating them or if MAC stats fetches are temporarily
+-       * disabled; slightly stale stats are acceptable.
++       * is updating them (or resetting the NIC); slightly stale
++       * stats are acceptable.
+        */
+       if (!spin_trylock(&efx->stats_lock))
+               return stats;
+-      if (!efx->stats_disable_count) {
++      if (efx->stats_enabled) {
+               efx->mac_op->update_stats(efx);
+               falcon_update_nic_stats(efx);
+       }
+@@ -1636,12 +1622,16 @@
+ /* Tears down the entire software state and most of the hardware state
+  * before reset.  */
+-void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+-                  struct ethtool_cmd *ecmd)
++void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+ {
+       EFX_ASSERT_RESET_SERIALISED(efx);
+-      efx_stats_disable(efx);
++      /* The net_dev->get_stats handler is quite slow, and will fail
++       * if a fetch is pending over reset. Serialise against it. */
++      spin_lock(&efx->stats_lock);
++      efx->stats_enabled = false;
++      spin_unlock(&efx->stats_lock);
++
+       efx_stop_all(efx);
+       mutex_lock(&efx->mac_lock);
+       mutex_lock(&efx->spi_lock);
+@@ -1649,8 +1639,6 @@
+       efx->phy_op->get_settings(efx, ecmd);
+       efx_fini_channels(efx);
+-      if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
+-              efx->phy_op->fini(efx);
+ }
+ /* This function will always ensure that the locks acquired in
+@@ -1658,8 +1646,7 @@
+  * that we were unable to reinitialise the hardware, and the
+  * driver should be disabled. If ok is false, then the rx and tx
+  * engines are not restarted, pending a RESET_DISABLE. */
+-int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+-               struct ethtool_cmd *ecmd, bool ok)
++int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
+ {
+       int rc;
+@@ -1671,15 +1658,6 @@
+               ok = false;
+       }
+-      if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) {
+-              if (ok) {
+-                      rc = efx->phy_op->init(efx);
+-                      if (rc)
+-                              ok = false;
+-              } else
+-                      efx->port_initialized = false;
+-      }
+-
+       if (ok) {
+               efx_init_channels(efx);
+@@ -1692,7 +1670,7 @@
+       if (ok) {
+               efx_start_all(efx);
+-              efx_stats_enable(efx);
++              efx->stats_enabled = true;
+       }
+       return rc;
+ }
+@@ -1724,7 +1702,7 @@
+       EFX_INFO(efx, "resetting (%d)\n", method);
+-      efx_reset_down(efx, method, &ecmd);
++      efx_reset_down(efx, &ecmd);
+       rc = falcon_reset_hw(efx, method);
+       if (rc) {
+@@ -1743,10 +1721,10 @@
+       /* Leave device stopped if necessary */
+       if (method == RESET_TYPE_DISABLE) {
+-              efx_reset_up(efx, method, &ecmd, false);
++              efx_reset_up(efx, &ecmd, false);
+               rc = -EIO;
+       } else {
+-              rc = efx_reset_up(efx, method, &ecmd, true);
++              rc = efx_reset_up(efx, &ecmd, true);
+       }
+ out_disable:
+@@ -1898,7 +1876,6 @@
+       efx->rx_checksum_enabled = true;
+       spin_lock_init(&efx->netif_stop_lock);
+       spin_lock_init(&efx->stats_lock);
+-      efx->stats_disable_count = 1;
+       mutex_init(&efx->mac_lock);
+       efx->mac_op = &efx_dummy_mac_operations;
+       efx->phy_op = &efx_dummy_phy_operations;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/efx.h linux-2.6.29-rc3.owrt/drivers/net/sfc/efx.h
+--- linux-2.6.29.owrt/drivers/net/sfc/efx.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/efx.h        2009-05-10 23:48:29.000000000 +0200
+@@ -36,16 +36,13 @@
+ extern void efx_flush_queues(struct efx_nic *efx);
+ /* Ports */
+-extern void efx_stats_disable(struct efx_nic *efx);
+-extern void efx_stats_enable(struct efx_nic *efx);
+ extern void efx_reconfigure_port(struct efx_nic *efx);
+ extern void __efx_reconfigure_port(struct efx_nic *efx);
+ /* Reset handling */
+-extern void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+-                         struct ethtool_cmd *ecmd);
+-extern int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+-                      struct ethtool_cmd *ecmd, bool ok);
++extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd);
++extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd,
++                      bool ok);
+ /* Global */
+ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/ethtool.c linux-2.6.29-rc3.owrt/drivers/net/sfc/ethtool.c
+--- linux-2.6.29.owrt/drivers/net/sfc/ethtool.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/ethtool.c    2009-05-10 23:48:29.000000000 +0200
+@@ -219,6 +219,9 @@
+       struct efx_nic *efx = netdev_priv(net_dev);
+       int rc;
++      if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg)
++              return -EINVAL;
++
+       /* Falcon GMAC does not support 1000Mbps HD */
+       if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
+               EFX_LOG(efx, "rejecting unsupported 1000Mbps HD"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/falcon.c linux-2.6.29-rc3.owrt/drivers/net/sfc/falcon.c
+--- linux-2.6.29.owrt/drivers/net/sfc/falcon.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/falcon.c     2009-05-10 23:48:29.000000000 +0200
+@@ -824,6 +824,10 @@
+                           rx_ev_pause_frm ? " [PAUSE]" : "");
+       }
+ #endif
++
++      if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) &&
++                   efx->phy_type == PHY_TYPE_SFX7101))
++              tenxpress_crc_err(efx);
+ }
+ /* Handle receive events that are not in-order. */
+@@ -1883,7 +1887,7 @@
+       /* MAC stats will fail whilst the TX fifo is draining. Serialise
+        * the drain sequence with the statistics fetch */
+-      efx_stats_disable(efx);
++      spin_lock(&efx->stats_lock);
+       falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
+       EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1);
+@@ -1913,7 +1917,7 @@
+               udelay(10);
+       }
+-      efx_stats_enable(efx);
++      spin_unlock(&efx->stats_lock);
+       /* If we've reset the EM block and the link is up, then
+        * we'll have to kick the XAUI link so the PHY can recover */
+@@ -2273,10 +2277,6 @@
+       struct efx_mac_operations *old_mac_op = efx->mac_op;
+       efx_oword_t nic_stat;
+       unsigned strap_val;
+-      int rc = 0;
+-
+-      /* Don't try to fetch MAC stats while we're switching MACs */
+-      efx_stats_disable(efx);
+       /* Internal loopbacks override the phy speed setting */
+       if (efx->loopback_mode == LOOPBACK_GMAC) {
+@@ -2287,12 +2287,16 @@
+               efx->link_fd = true;
+       }
+-      WARN_ON(!mutex_is_locked(&efx->mac_lock));
+       efx->mac_op = (EFX_IS10G(efx) ?
+                      &falcon_xmac_operations : &falcon_gmac_operations);
++      if (old_mac_op == efx->mac_op)
++              return 0;
++
++      WARN_ON(!mutex_is_locked(&efx->mac_lock));
++
++      /* Not all macs support a mac-level link state */
++      efx->mac_up = true;
+-      /* Always push the NIC_STAT_REG setting even if the mac hasn't
+-       * changed, because this function is run post online reset */
+       falcon_read(efx, &nic_stat, NIC_STAT_REG);
+       strap_val = EFX_IS10G(efx) ? 5 : 3;
+       if (falcon_rev(efx) >= FALCON_REV_B0) {
+@@ -2305,17 +2309,9 @@
+               BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val);
+       }
+-      if (old_mac_op == efx->mac_op)
+-              goto out;
+       EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G');
+-      /* Not all macs support a mac-level link state */
+-      efx->mac_up = true;
+-
+-      rc = falcon_reset_macs(efx);
+-out:
+-      efx_stats_enable(efx);
+-      return rc;
++      return falcon_reset_macs(efx);
+ }
+ /* This call is responsible for hooking in the MAC and PHY operations */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/mdio_10g.c linux-2.6.29-rc3.owrt/drivers/net/sfc/mdio_10g.c
+--- linux-2.6.29.owrt/drivers/net/sfc/mdio_10g.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/mdio_10g.c   2009-05-10 23:48:29.000000000 +0200
+@@ -15,7 +15,6 @@
+ #include "net_driver.h"
+ #include "mdio_10g.h"
+ #include "boards.h"
+-#include "workarounds.h"
+ int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
+                           int spins, int spintime)
+@@ -180,12 +179,17 @@
+               return false;
+       else if (efx_phy_mode_disabled(efx->phy_mode))
+               return false;
+-      else if (efx->loopback_mode == LOOPBACK_PHYXS)
++      else if (efx->loopback_mode == LOOPBACK_PHYXS) {
+               mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
+                             MDIO_MMDREG_DEVS_PCS |
+                             MDIO_MMDREG_DEVS_PMAPMD |
+                             MDIO_MMDREG_DEVS_AN);
+-      else if (efx->loopback_mode == LOOPBACK_PCS)
++              if (!mmd_mask) {
++                      reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
++                                               MDIO_PHYXS_STATUS2);
++                      return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
++              }
++      } else if (efx->loopback_mode == LOOPBACK_PCS)
+               mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
+                             MDIO_MMDREG_DEVS_PMAPMD |
+                             MDIO_MMDREG_DEVS_AN);
+@@ -193,13 +197,6 @@
+               mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
+                             MDIO_MMDREG_DEVS_AN);
+-      if (!mmd_mask) {
+-              /* Use presence of XGMII faults in leui of link state */
+-              reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
+-                                       MDIO_PHYXS_STATUS2);
+-              return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
+-      }
+-
+       while (mmd_mask) {
+               if (mmd_mask & 1) {
+                       /* Double reads because link state is latched, and a
+@@ -266,7 +263,7 @@
+       }
+ }
+-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
++static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
+ {
+       int phy_id = efx->mii.phy_id;
+       u32 result = 0;
+@@ -281,6 +278,9 @@
+               result |= ADVERTISED_100baseT_Half;
+       if (reg & ADVERTISE_100FULL)
+               result |= ADVERTISED_100baseT_Full;
++      if (reg & LPA_RESV)
++              result |= xnp;
++
+       return result;
+ }
+@@ -310,7 +310,7 @@
+  */
+ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
+                                   struct ethtool_cmd *ecmd,
+-                                  u32 npage_adv, u32 npage_lpa)
++                                  u32 xnp, u32 xnp_lpa)
+ {
+       int phy_id = efx->mii.phy_id;
+       int reg;
+@@ -361,8 +361,8 @@
+                       ecmd->autoneg = AUTONEG_ENABLE;
+                       ecmd->advertising |=
+                               ADVERTISED_Autoneg |
+-                              mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
+-                              npage_adv;
++                              mdio_clause45_get_an(efx,
++                                                   MDIO_AN_ADVERTISE, xnp);
+               } else
+                       ecmd->autoneg = AUTONEG_DISABLE;
+       } else
+@@ -371,30 +371,27 @@
+       if (ecmd->autoneg) {
+               /* If AN is complete, report best common mode,
+                * otherwise report best advertised mode. */
+-              u32 modes = 0;
++              u32 common = ecmd->advertising;
+               if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+                                      MDIO_MMDREG_STAT1) &
+-                  (1 << MDIO_AN_STATUS_AN_DONE_LBN))
+-                      modes = (ecmd->advertising &
+-                               (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
+-                                npage_lpa));
+-              if (modes == 0)
+-                      modes = ecmd->advertising;
+-
+-              if (modes & ADVERTISED_10000baseT_Full) {
++                  (1 << MDIO_AN_STATUS_AN_DONE_LBN)) {
++                      common &= mdio_clause45_get_an(efx, MDIO_AN_LPA,
++                                                     xnp_lpa);
++              }
++              if (common & ADVERTISED_10000baseT_Full) {
+                       ecmd->speed = SPEED_10000;
+                       ecmd->duplex = DUPLEX_FULL;
+-              } else if (modes & (ADVERTISED_1000baseT_Full |
+-                                  ADVERTISED_1000baseT_Half)) {
++              } else if (common & (ADVERTISED_1000baseT_Full |
++                                   ADVERTISED_1000baseT_Half)) {
+                       ecmd->speed = SPEED_1000;
+-                      ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
+-              } else if (modes & (ADVERTISED_100baseT_Full |
+-                                  ADVERTISED_100baseT_Half)) {
++                      ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full);
++              } else if (common & (ADVERTISED_100baseT_Full |
++                                   ADVERTISED_100baseT_Half)) {
+                       ecmd->speed = SPEED_100;
+-                      ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
++                      ecmd->duplex = !!(common & ADVERTISED_100baseT_Full);
+               } else {
+                       ecmd->speed = SPEED_10;
+-                      ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
++                      ecmd->duplex = !!(common & ADVERTISED_10baseT_Full);
+               }
+       } else {
+               /* Report forced settings */
+@@ -418,7 +415,7 @@
+       int phy_id = efx->mii.phy_id;
+       struct ethtool_cmd prev;
+       u32 required;
+-      int reg;
++      int ctrl1_bits, reg;
+       efx->phy_op->get_settings(efx, &prev);
+@@ -433,83 +430,99 @@
+       if (prev.port != PORT_TP || ecmd->port != PORT_TP)
+               return -EINVAL;
+-      /* Check that PHY supports these settings */
+-      if (ecmd->autoneg) {
+-              required = SUPPORTED_Autoneg;
+-      } else if (ecmd->duplex) {
++      /* Check that PHY supports these settings and work out the
++       * basic control bits */
++      if (ecmd->duplex) {
+               switch (ecmd->speed) {
+-              case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
+-              case SPEED_100: required = SUPPORTED_100baseT_Full; break;
+-              default:        return -EINVAL;
++              case SPEED_10:
++                      ctrl1_bits = BMCR_FULLDPLX;
++                      required = SUPPORTED_10baseT_Full;
++                      break;
++              case SPEED_100:
++                      ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX;
++                      required = SUPPORTED_100baseT_Full;
++                      break;
++              case SPEED_1000:
++                      ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX;
++                      required = SUPPORTED_1000baseT_Full;
++                      break;
++              case SPEED_10000:
++                      ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 |
++                                    BMCR_FULLDPLX);
++                      required = SUPPORTED_10000baseT_Full;
++                      break;
++              default:
++                      return -EINVAL;
+               }
+       } else {
+               switch (ecmd->speed) {
+-              case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
+-              case SPEED_100: required = SUPPORTED_100baseT_Half; break;
+-              default:        return -EINVAL;
++              case SPEED_10:
++                      ctrl1_bits = 0;
++                      required = SUPPORTED_10baseT_Half;
++                      break;
++              case SPEED_100:
++                      ctrl1_bits = BMCR_SPEED100;
++                      required = SUPPORTED_100baseT_Half;
++                      break;
++              case SPEED_1000:
++                      ctrl1_bits = BMCR_SPEED1000;
++                      required = SUPPORTED_1000baseT_Half;
++                      break;
++              default:
++                      return -EINVAL;
+               }
+       }
++      if (ecmd->autoneg)
++              required |= SUPPORTED_Autoneg;
+       required |= ecmd->advertising;
+       if (required & ~prev.supported)
+               return -EINVAL;
+-      if (ecmd->autoneg) {
+-              bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+-                          || EFX_WORKAROUND_13204(efx));
+-
+-              /* Set up the base page */
+-              reg = ADVERTISE_CSMA;
+-              if (ecmd->advertising & ADVERTISED_10baseT_Half)
+-                      reg |= ADVERTISE_10HALF;
+-              if (ecmd->advertising & ADVERTISED_10baseT_Full)
+-                      reg |= ADVERTISE_10FULL;
+-              if (ecmd->advertising & ADVERTISED_100baseT_Half)
+-                      reg |= ADVERTISE_100HALF;
+-              if (ecmd->advertising & ADVERTISED_100baseT_Full)
+-                      reg |= ADVERTISE_100FULL;
+-              if (xnp)
+-                      reg |= ADVERTISE_RESV;
+-              else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+-                                            ADVERTISED_1000baseT_Full))
+-                      reg |= ADVERTISE_NPAGE;
+-              reg |= efx_fc_advertise(efx->wanted_fc);
+-              mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
+-                                  MDIO_AN_ADVERTISE, reg);
+-
+-              /* Set up the (extended) next page if necessary */
+-              if (efx->phy_op->set_npage_adv)
+-                      efx->phy_op->set_npage_adv(efx, ecmd->advertising);
++      /* Set the basic control bits */
++      reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
++                               MDIO_MMDREG_CTRL1);
++      reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c);
++      reg |= ctrl1_bits;
++      mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1,
++                          reg);
++
++      /* Set the AN registers */
++      if (ecmd->autoneg != prev.autoneg ||
++          ecmd->advertising != prev.advertising) {
++              bool xnp = false;
++
++              if (efx->phy_op->set_xnp_advertise)
++                      xnp = efx->phy_op->set_xnp_advertise(efx,
++                                                           ecmd->advertising);
++
++              if (ecmd->autoneg) {
++                      reg = 0;
++                      if (ecmd->advertising & ADVERTISED_10baseT_Half)
++                              reg |= ADVERTISE_10HALF;
++                      if (ecmd->advertising & ADVERTISED_10baseT_Full)
++                              reg |= ADVERTISE_10FULL;
++                      if (ecmd->advertising & ADVERTISED_100baseT_Half)
++                              reg |= ADVERTISE_100HALF;
++                      if (ecmd->advertising & ADVERTISED_100baseT_Full)
++                              reg |= ADVERTISE_100FULL;
++                      if (xnp)
++                              reg |= ADVERTISE_RESV;
++                      mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
++                                          MDIO_AN_ADVERTISE, reg);
++              }
+-              /* Enable and restart AN */
+               reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+                                        MDIO_MMDREG_CTRL1);
+-              reg |= BMCR_ANENABLE;
+-              if (!(EFX_WORKAROUND_15195(efx) &&
+-                    LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+-                      reg |= BMCR_ANRESTART;
++              if (ecmd->autoneg)
++                      reg |= BMCR_ANENABLE | BMCR_ANRESTART;
++              else
++                      reg &= ~BMCR_ANENABLE;
+               if (xnp)
+                       reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
+               else
+                       reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
+               mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
+                                   MDIO_MMDREG_CTRL1, reg);
+-      } else {
+-              /* Disable AN */
+-              mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+-                                     MDIO_MMDREG_CTRL1,
+-                                     __ffs(BMCR_ANENABLE), false);
+-
+-              /* Set the basic control bits */
+-              reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+-                                       MDIO_MMDREG_CTRL1);
+-              reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
+-                       0x003c);
+-              if (ecmd->speed == SPEED_100)
+-                      reg |= BMCR_SPEED100;
+-              if (ecmd->duplex)
+-                      reg |= BMCR_FULLDPLX;
+-              mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+-                                  MDIO_MMDREG_CTRL1, reg);
+       }
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/mdio_10g.h linux-2.6.29-rc3.owrt/drivers/net/sfc/mdio_10g.h
+--- linux-2.6.29.owrt/drivers/net/sfc/mdio_10g.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/mdio_10g.h   2009-05-10 23:48:29.000000000 +0200
+@@ -155,8 +155,7 @@
+ #define MDIO_AN_XNP                   22
+ #define MDIO_AN_LPA_XNP                       25
+-#define MDIO_AN_10GBT_CTRL            32
+-#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN        12
++#define MDIO_AN_10GBT_ADVERTISE               32
+ #define MDIO_AN_10GBT_STATUS          (33)
+ #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
+ #define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/net_driver.h linux-2.6.29-rc3.owrt/drivers/net/sfc/net_driver.h
+--- linux-2.6.29.owrt/drivers/net/sfc/net_driver.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/net_driver.h 2009-05-10 23:48:29.000000000 +0200
+@@ -566,7 +566,7 @@
+  * @poll: Poll for hardware state. Serialised by the mac_lock.
+  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
+  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
+- * @set_npage_adv: Set abilities advertised in (Extended) Next Page
++ * @set_xnp_advertise: Set abilities advertised in Extended Next Page
+  *    (only needed where AN bit is set in mmds)
+  * @num_tests: Number of PHY-specific tests/results
+  * @test_names: Names of the tests/results
+@@ -586,7 +586,7 @@
+                             struct ethtool_cmd *ecmd);
+       int (*set_settings) (struct efx_nic *efx,
+                            struct ethtool_cmd *ecmd);
+-      void (*set_npage_adv) (struct efx_nic *efx, u32);
++      bool (*set_xnp_advertise) (struct efx_nic *efx, u32);
+       u32 num_tests;
+       const char *const *test_names;
+       int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
+@@ -754,7 +754,8 @@
+  *    &struct net_device_stats.
+  * @stats_buffer: DMA buffer for statistics
+  * @stats_lock: Statistics update lock. Serialises statistics fetches
+- * @stats_disable_count: Nest count for disabling statistics fetches
++ * @stats_enabled: Temporarily disable statistics fetches.
++ *    Serialised by @stats_lock
+  * @mac_op: MAC interface
+  * @mac_address: Permanent MAC address
+  * @phy_type: PHY type
+@@ -836,7 +837,7 @@
+       struct efx_mac_stats mac_stats;
+       struct efx_buffer stats_buffer;
+       spinlock_t stats_lock;
+-      unsigned int stats_disable_count;
++      bool stats_enabled;
+       struct efx_mac_operations *mac_op;
+       unsigned char mac_address[ETH_ALEN];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/phy.h linux-2.6.29-rc3.owrt/drivers/net/sfc/phy.h
+--- linux-2.6.29.owrt/drivers/net/sfc/phy.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/phy.h        2009-05-10 23:48:29.000000000 +0200
+@@ -17,6 +17,7 @@
+ extern struct efx_phy_operations falcon_sft9001_phy_ops;
+ extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
++extern void tenxpress_crc_err(struct efx_nic *efx);
+ /****************************************************************************
+  * Exported functions from the driver for XFP optical PHYs
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/selftest.c linux-2.6.29-rc3.owrt/drivers/net/sfc/selftest.c
+--- linux-2.6.29.owrt/drivers/net/sfc/selftest.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/selftest.c   2009-05-10 23:48:29.000000000 +0200
+@@ -665,7 +665,6 @@
+ {
+       enum efx_loopback_mode loopback_mode = efx->loopback_mode;
+       int phy_mode = efx->phy_mode;
+-      enum reset_type reset_method = RESET_TYPE_INVISIBLE;
+       struct ethtool_cmd ecmd;
+       struct efx_channel *channel;
+       int rc_test = 0, rc_reset = 0, rc;
+@@ -719,21 +718,21 @@
+       mutex_unlock(&efx->mac_lock);
+       /* free up all consumers of SRAM (including all the queues) */
+-      efx_reset_down(efx, reset_method, &ecmd);
++      efx_reset_down(efx, &ecmd);
+       rc = efx_test_chip(efx, tests);
+       if (rc && !rc_test)
+               rc_test = rc;
+       /* reset the chip to recover from the register test */
+-      rc_reset = falcon_reset_hw(efx, reset_method);
++      rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL);
+       /* Ensure that the phy is powered and out of loopback
+        * for the bist and loopback tests */
+       efx->phy_mode &= ~PHY_MODE_LOW_POWER;
+       efx->loopback_mode = LOOPBACK_NONE;
+-      rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0);
++      rc = efx_reset_up(efx, &ecmd, rc_reset == 0);
+       if (rc && !rc_reset)
+               rc_reset = rc;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/sfe4001.c linux-2.6.29-rc3.owrt/drivers/net/sfc/sfe4001.c
+--- linux-2.6.29.owrt/drivers/net/sfc/sfe4001.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/sfe4001.c    2009-05-10 23:48:29.000000000 +0200
+@@ -186,22 +186,19 @@
+ {
+       efx_oword_t reg;
+-      /* GPIO 3 and the GPIO register are shared with I2C, so block that */
++      /* GPIO pins are also used for I2C, so block that temporarily */
+       mutex_lock(&efx->i2c_adap.bus_lock);
+-      /* Pull RST_N (GPIO 2) low then let it up again, setting the
+-       * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+-       * output enables; the output levels should always be 0 (low)
+-       * and we rely on external pull-ups. */
+       falcon_read(efx, &reg, GPIO_CTL_REG_KER);
+       EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
++      EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false);
+       falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+       msleep(1000);
+-      EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
+-      EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
+-                          !!(efx->phy_mode & PHY_MODE_SPECIAL));
++      EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true);
++      EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true);
++      EFX_SET_OWORD_FIELD(reg, GPIO3_OUT,
++                          !(efx->phy_mode & PHY_MODE_SPECIAL));
+       falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+-      msleep(1);
+       mutex_unlock(&efx->i2c_adap.bus_lock);
+@@ -235,18 +232,12 @@
+       } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
+               err = -EBUSY;
+       } else {
+-              /* Reset the PHY, reconfigure the MAC and enable/disable
+-               * MAC stats accordingly. */
+               efx->phy_mode = new_mode;
+-              if (new_mode & PHY_MODE_SPECIAL)
+-                      efx_stats_disable(efx);
+               if (efx->board_info.type == EFX_BOARD_SFE4001)
+                       err = sfe4001_poweron(efx);
+               else
+                       err = sfn4111t_reset(efx);
+               efx_reconfigure_port(efx);
+-              if (!(new_mode & PHY_MODE_SPECIAL))
+-                      efx_stats_enable(efx);
+       }
+       rtnl_unlock();
+@@ -335,11 +326,6 @@
+       efx->board_info.monitor = sfe4001_check_hw;
+       efx->board_info.fini = sfe4001_fini;
+-      if (efx->phy_mode & PHY_MODE_SPECIAL) {
+-              /* PHY won't generate a 156.25 MHz clock and MAC stats fetch
+-               * will fail. */
+-              efx_stats_disable(efx);
+-      }
+       rc = sfe4001_poweron(efx);
+       if (rc)
+               goto fail_ioexp;
+@@ -386,25 +372,17 @@
+       i2c_unregister_device(efx->board_info.hwmon_client);
+ }
+-static struct i2c_board_info sfn4111t_a0_hwmon_info = {
++static struct i2c_board_info sfn4111t_hwmon_info = {
+       I2C_BOARD_INFO("max6647", 0x4e),
+       .irq            = -1,
+ };
+-static struct i2c_board_info sfn4111t_r5_hwmon_info = {
+-      I2C_BOARD_INFO("max6646", 0x4d),
+-      .irq            = -1,
+-};
+-
+ int sfn4111t_init(struct efx_nic *efx)
+ {
+       int rc;
+       efx->board_info.hwmon_client =
+-              i2c_new_device(&efx->i2c_adap,
+-                             (efx->board_info.minor < 5) ?
+-                             &sfn4111t_a0_hwmon_info :
+-                             &sfn4111t_r5_hwmon_info);
++              i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info);
+       if (!efx->board_info.hwmon_client)
+               return -EIO;
+@@ -416,10 +394,8 @@
+       if (rc)
+               goto fail_hwmon;
+-      if (efx->phy_mode & PHY_MODE_SPECIAL) {
+-              efx_stats_disable(efx);
++      if (efx->phy_mode & PHY_MODE_SPECIAL)
+               sfn4111t_reset(efx);
+-      }
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/tenxpress.c linux-2.6.29-rc3.owrt/drivers/net/sfc/tenxpress.c
+--- linux-2.6.29.owrt/drivers/net/sfc/tenxpress.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/tenxpress.c  2009-05-10 23:48:29.000000000 +0200
+@@ -67,8 +67,6 @@
+ #define PMA_PMD_EXT_CLK312_WIDTH 1
+ #define PMA_PMD_EXT_LPOWER_LBN  12
+ #define PMA_PMD_EXT_LPOWER_WIDTH 1
+-#define PMA_PMD_EXT_ROBUST_LBN        14
+-#define PMA_PMD_EXT_ROBUST_WIDTH 1
+ #define PMA_PMD_EXT_SSR_LBN   15
+ #define PMA_PMD_EXT_SSR_WIDTH 1
+@@ -179,24 +177,35 @@
+ #define C22EXT_STATUS_LINK_LBN  2
+ #define C22EXT_STATUS_LINK_WIDTH 1
+-#define C22EXT_MSTSLV_CTRL                    49161
+-#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN    8
+-#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN    9
+-
+-#define C22EXT_MSTSLV_STATUS                  49162
+-#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN   10
+-#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN   11
++#define C22EXT_MSTSLV_REG       49162
++#define C22EXT_MSTSLV_1000_HD_LBN 10
++#define C22EXT_MSTSLV_1000_HD_WIDTH 1
++#define C22EXT_MSTSLV_1000_FD_LBN 11
++#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+ /* Time to wait between powering down the LNPGA and turning off the power
+  * rails */
+ #define LNPGA_PDOWN_WAIT      (HZ / 5)
++static int crc_error_reset_threshold = 100;
++module_param(crc_error_reset_threshold, int, 0644);
++MODULE_PARM_DESC(crc_error_reset_threshold,
++               "Max number of CRC errors before XAUI reset");
++
+ struct tenxpress_phy_data {
+       enum efx_loopback_mode loopback_mode;
++      atomic_t bad_crc_count;
+       enum efx_phy_mode phy_mode;
+       int bad_lp_tries;
+ };
++void tenxpress_crc_err(struct efx_nic *efx)
++{
++      struct tenxpress_phy_data *phy_data = efx->phy_data;
++      if (phy_data != NULL)
++              atomic_inc(&phy_data->bad_crc_count);
++}
++
+ static ssize_t show_phy_short_reach(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+ {
+@@ -275,9 +284,7 @@
+                                        PMA_PMD_XCONTROL_REG);
+               reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
+                       (1 << PMA_PMD_EXT_CLK_OUT_LBN) |
+-                      (1 << PMA_PMD_EXT_CLK312_LBN) |
+-                      (1 << PMA_PMD_EXT_ROBUST_LBN));
+-
++                      (1 << PMA_PMD_EXT_CLK312_LBN));
+               mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+                                   PMA_PMD_XCONTROL_REG, reg);
+               mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+@@ -339,7 +346,6 @@
+       rc = tenxpress_init(efx);
+       if (rc < 0)
+               goto fail;
+-      mdio_clause45_set_pause(efx);
+       if (efx->phy_type == PHY_TYPE_SFT9001B) {
+               rc = device_create_file(&efx->pci_dev->dev,
+@@ -370,8 +376,8 @@
+       /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
+        * a special software reset can glitch the XGMAC sufficiently for stats
+-       * requests to fail. */
+-      efx_stats_disable(efx);
++       * requests to fail. Since we don't often special_reset, just lock. */
++      spin_lock(&efx->stats_lock);
+       /* Initiate reset */
+       reg = mdio_clause45_read(efx, efx->mii.phy_id,
+@@ -386,17 +392,17 @@
+       rc = mdio_clause45_wait_reset_mmds(efx,
+                                          TENXPRESS_REQUIRED_DEVS);
+       if (rc < 0)
+-              goto out;
++              goto unlock;
+       /* Try and reconfigure the device */
+       rc = tenxpress_init(efx);
+       if (rc < 0)
+-              goto out;
++              goto unlock;
+       /* Wait for the XGXS state machine to churn */
+       mdelay(10);
+-out:
+-      efx_stats_enable(efx);
++unlock:
++      spin_unlock(&efx->stats_lock);
+       return rc;
+ }
+@@ -514,7 +520,7 @@
+ {
+       struct tenxpress_phy_data *phy_data = efx->phy_data;
+       struct ethtool_cmd ecmd;
+-      bool phy_mode_change, loop_reset;
++      bool phy_mode_change, loop_reset, loop_toggle, loopback;
+       if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
+               phy_data->phy_mode = efx->phy_mode;
+@@ -525,10 +531,12 @@
+       phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
+                          phy_data->phy_mode != PHY_MODE_NORMAL);
++      loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
++      loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
+       loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
+                     LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
+-      if (loop_reset || phy_mode_change) {
++      if (loop_reset || loop_toggle || loopback || phy_mode_change) {
+               int rc;
+               efx->phy_op->get_settings(efx, &ecmd);
+@@ -543,6 +551,20 @@
+                               falcon_reset_xaui(efx);
+               }
++              if (efx->phy_type != PHY_TYPE_SFX7101) {
++                      /* Only change autoneg once, on coming out or
++                       * going into loopback */
++                      if (loop_toggle)
++                              ecmd.autoneg = !loopback;
++                      if (loopback) {
++                              ecmd.duplex = DUPLEX_FULL;
++                              if (efx->loopback_mode == LOOPBACK_GPHY)
++                                      ecmd.speed = SPEED_1000;
++                              else
++                                      ecmd.speed = SPEED_10000;
++                      }
++              }
++
+               rc = efx->phy_op->set_settings(efx, &ecmd);
+               WARN_ON(rc);
+       }
+@@ -601,6 +623,13 @@
+       if (phy_data->phy_mode != PHY_MODE_NORMAL)
+               return;
++
++      if (EFX_WORKAROUND_10750(efx) &&
++          atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
++              EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
++              falcon_reset_xaui(efx);
++              atomic_set(&phy_data->bad_crc_count, 0);
++      }
+ }
+ static void tenxpress_phy_fini(struct efx_nic *efx)
+@@ -743,76 +772,107 @@
+       return rc;
+ }
+-static void
+-tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
++static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
+ {
+-      int phy_id = efx->mii.phy_id;
+-      u32 adv = 0, lpa = 0;
++      int phy = efx->mii.phy_id;
++      u32 lpa = 0;
+       int reg;
+       if (efx->phy_type != PHY_TYPE_SFX7101) {
+-              reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+-                                       C22EXT_MSTSLV_CTRL);
+-              if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
+-                      adv |= ADVERTISED_1000baseT_Full;
+-              reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+-                                       C22EXT_MSTSLV_STATUS);
+-              if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
++              reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
++                                       C22EXT_MSTSLV_REG);
++              if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+                       lpa |= ADVERTISED_1000baseT_Half;
+-              if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
++              if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+                       lpa |= ADVERTISED_1000baseT_Full;
+       }
+-      reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+-                               MDIO_AN_10GBT_CTRL);
+-      if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+-              adv |= ADVERTISED_10000baseT_Full;
+-      reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+-                               MDIO_AN_10GBT_STATUS);
++      reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
+       if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
+               lpa |= ADVERTISED_10000baseT_Full;
+-
+-      mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+-
+-      if (efx->phy_type != PHY_TYPE_SFX7101)
+-              ecmd->supported |= (SUPPORTED_100baseT_Full |
+-                                  SUPPORTED_1000baseT_Full);
+-
+-      /* In loopback, the PHY automatically brings up the correct interface,
+-       * but doesn't advertise the correct speed. So override it */
+-      if (efx->loopback_mode == LOOPBACK_GPHY)
+-              ecmd->speed = SPEED_1000;
+-      else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
+-              ecmd->speed = SPEED_10000;
++      return lpa;
+ }
+-static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
++static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+ {
+-      if (!ecmd->autoneg)
+-              return -EINVAL;
+-
+-      return mdio_clause45_set_settings(efx, ecmd);
++      mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
++                                     tenxpress_get_xnp_lpa(efx));
++      ecmd->supported |= SUPPORTED_10000baseT_Full;
++      ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ }
+-static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
++static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+ {
+-      mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
+-                             MDIO_AN_10GBT_CTRL,
+-                             MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+-                             advertising & ADVERTISED_10000baseT_Full);
++      int phy_id = efx->mii.phy_id;
++      u32 xnp_adv = 0;
++      int reg;
++
++      reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
++                               PMA_PMD_SPEED_ENABLE_REG);
++      if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
++              xnp_adv |= ADVERTISED_100baseT_Full;
++      if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
++              xnp_adv |= ADVERTISED_1000baseT_Full;
++      if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
++              xnp_adv |= ADVERTISED_10000baseT_Full;
++
++      mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
++                                     tenxpress_get_xnp_lpa(efx));
++
++      ecmd->supported |= (SUPPORTED_100baseT_Half |
++                          SUPPORTED_100baseT_Full |
++                          SUPPORTED_1000baseT_Full);
++
++      /* Use the vendor defined C22ext register for duplex settings */
++      if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
++              reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
++                                       GPHY_XCONTROL_REG);
++              ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
++                              DUPLEX_FULL : DUPLEX_HALF);
++      }
+ }
+-static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
++static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+ {
+       int phy_id = efx->mii.phy_id;
++      int rc;
+-      mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+-                             C22EXT_MSTSLV_CTRL,
+-                             C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+-                             advertising & ADVERTISED_1000baseT_Full);
+-      mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+-                             MDIO_AN_10GBT_CTRL,
+-                             MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+-                             advertising & ADVERTISED_10000baseT_Full);
++      rc = mdio_clause45_set_settings(efx, ecmd);
++      if (rc)
++              return rc;
++
++      if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
++              mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
++                                     GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
++                                     ecmd->duplex == DUPLEX_FULL);
++
++      return rc;
++}
++
++static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
++{
++      int phy = efx->mii.phy_id;
++      int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
++                                   PMA_PMD_SPEED_ENABLE_REG);
++      bool enabled;
++
++      reg &= ~((1 << 2) | (1 << 3));
++      if (EFX_WORKAROUND_13204(efx) &&
++          (advertising & ADVERTISED_100baseT_Full))
++              reg |= 1 << PMA_PMD_100TX_ADV_LBN;
++      if (advertising & ADVERTISED_1000baseT_Full)
++              reg |= 1 << PMA_PMD_1000T_ADV_LBN;
++      if (advertising & ADVERTISED_10000baseT_Full)
++              reg |= 1 << PMA_PMD_10000T_ADV_LBN;
++      mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
++                          PMA_PMD_SPEED_ENABLE_REG, reg);
++
++      enabled = (advertising &
++                 (ADVERTISED_1000baseT_Half |
++                  ADVERTISED_1000baseT_Full |
++                  ADVERTISED_10000baseT_Full));
++      if (EFX_WORKAROUND_13204(efx))
++              enabled |= (advertising & ADVERTISED_100baseT_Full);
++      return enabled;
+ }
+ struct efx_phy_operations falcon_sfx7101_phy_ops = {
+@@ -822,9 +882,8 @@
+       .poll             = tenxpress_phy_poll,
+       .fini             = tenxpress_phy_fini,
+       .clear_interrupt  = efx_port_dummy_op_void,
+-      .get_settings     = tenxpress_get_settings,
+-      .set_settings     = tenxpress_set_settings,
+-      .set_npage_adv    = sfx7101_set_npage_adv,
++      .get_settings     = sfx7101_get_settings,
++      .set_settings     = mdio_clause45_set_settings,
+       .num_tests        = ARRAY_SIZE(sfx7101_test_names),
+       .test_names       = sfx7101_test_names,
+       .run_tests        = sfx7101_run_tests,
+@@ -839,9 +898,9 @@
+       .poll             = tenxpress_phy_poll,
+       .fini             = tenxpress_phy_fini,
+       .clear_interrupt  = efx_port_dummy_op_void,
+-      .get_settings     = tenxpress_get_settings,
+-      .set_settings     = tenxpress_set_settings,
+-      .set_npage_adv    = sft9001_set_npage_adv,
++      .get_settings     = sft9001_get_settings,
++      .set_settings     = sft9001_set_settings,
++      .set_xnp_advertise = sft9001_set_xnp_advertise,
+       .num_tests        = ARRAY_SIZE(sft9001_test_names),
+       .test_names       = sft9001_test_names,
+       .run_tests        = sft9001_run_tests,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sfc/workarounds.h linux-2.6.29-rc3.owrt/drivers/net/sfc/workarounds.h
+--- linux-2.6.29.owrt/drivers/net/sfc/workarounds.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sfc/workarounds.h        2009-05-10 23:48:29.000000000 +0200
+@@ -18,8 +18,8 @@
+ #define EFX_WORKAROUND_ALWAYS(efx) 1
+ #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
+ #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx)
+-#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \
+-                                   (efx)->phy_type == PHY_TYPE_SFT9001B)
++#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101)
++#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A)
+ /* XAUI resets if link not detected */
+ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
+@@ -29,6 +29,8 @@
+ #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G
+ /* TX pkt parser problem with <= 16 byte TXes */
+ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS
++/* Low rate CRC errors require XAUI reset */
++#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101
+ /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor
+  * or a PCIe error (bug 11028) */
+ #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS
+@@ -53,8 +55,8 @@
+ #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A
+ /* Need to send XNP pages for 100BaseT */
+-#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001
+-/* Don't restart AN in near-side loopback */
+-#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001
++#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A
++/* Need to keep AN enabled */
++#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A
+ #endif /* EFX_WORKAROUNDS_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sh_eth.c linux-2.6.29-rc3.owrt/drivers/net/sh_eth.c
+--- linux-2.6.29.owrt/drivers/net/sh_eth.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sh_eth.c 2009-05-10 23:48:29.000000000 +0200
+@@ -687,7 +687,6 @@
+ {
+       struct net_device *ndev = netdev;
+       struct sh_eth_private *mdp = netdev_priv(ndev);
+-      irqreturn_t ret = IRQ_NONE;
+       u32 ioaddr, boguscnt = RX_RING_SIZE;
+       u32 intr_status = 0;
+@@ -697,13 +696,7 @@
+       /* Get interrpt stat */
+       intr_status = ctrl_inl(ioaddr + EESR);
+       /* Clear interrupt */
+-      if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
+-                      EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
+-                      TX_CHECK | EESR_ERR_CHECK)) {
+-              ctrl_outl(intr_status, ioaddr + EESR);
+-              ret = IRQ_HANDLED;
+-      } else
+-              goto other_irq;
++      ctrl_outl(intr_status, ioaddr + EESR);
+       if (intr_status & (EESR_FRC | /* Frame recv*/
+                       EESR_RMAF | /* Multi cast address recv*/
+@@ -730,10 +723,9 @@
+                      ndev->name, intr_status);
+       }
+-other_irq:
+       spin_unlock(&mdp->lock);
+-      return ret;
++      return IRQ_HANDLED;
+ }
+ static void sh_eth_timer(unsigned long data)
+@@ -852,13 +844,7 @@
+       int ret = 0;
+       struct sh_eth_private *mdp = netdev_priv(ndev);
+-      ret = request_irq(ndev->irq, &sh_eth_interrupt,
+-#if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
+-                              IRQF_SHARED,
+-#else
+-                              0,
+-#endif
+-                              ndev->name, ndev);
++      ret = request_irq(ndev->irq, &sh_eth_interrupt, 0, ndev->name, ndev);
+       if (ret) {
+               printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
+               return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sh_eth.h linux-2.6.29-rc3.owrt/drivers/net/sh_eth.h
+--- linux-2.6.29.owrt/drivers/net/sh_eth.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sh_eth.h 2009-05-10 23:48:29.000000000 +0200
+@@ -43,8 +43,8 @@
+ #define SH7763_SKB_ALIGN 32
+ /* Chip Base Address */
+-# define SH_TSU_ADDR  0xFEE01800
+-# define ARSTR                        SH_TSU_ADDR
++# define SH_TSU_ADDR  0xFFE01800
++# define ARSTR                  0xFFE01800
+ /* Chip Registers */
+ /* E-DMAC */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/skfp/skfddi.c linux-2.6.29-rc3.owrt/drivers/net/skfp/skfddi.c
+--- linux-2.6.29.owrt/drivers/net/skfp/skfddi.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/skfp/skfddi.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1003,9 +1003,9 @@
+               break;
+       case SKFP_CLR_STATS:    /* Zero out the driver statistics */
+               if (!capable(CAP_NET_ADMIN)) {
+-                      status = -EPERM;
+-              } else {
+                       memset(&lp->MacStat, 0, sizeof(lp->MacStat));
++              } else {
++                      status = -EPERM;
+               }
+               break;
+       default:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sky2.c linux-2.6.29-rc3.owrt/drivers/net/sky2.c
+--- linux-2.6.29.owrt/drivers/net/sky2.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sky2.c   2009-05-10 23:48:29.000000000 +0200
+@@ -1403,6 +1403,9 @@
+       }
++      if (netif_msg_ifup(sky2))
++              printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
++
+       netif_carrier_off(dev);
+       /* must be power of 2 */
+@@ -1481,9 +1484,6 @@
+       sky2_write32(hw, B0_IMSK, imask);
+       sky2_set_multicast(dev);
+-
+-      if (netif_msg_ifup(sky2))
+-              printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+       return 0;
+ err_out:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/smc911x.c linux-2.6.29-rc3.owrt/drivers/net/smc911x.c
+--- linux-2.6.29.owrt/drivers/net/smc911x.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/smc911x.c        2009-05-10 23:48:29.000000000 +0200
+@@ -220,9 +220,9 @@
+       /* make sure EEPROM has finished loading before setting GPIO_CFG */
+       timeout=1000;
+-      while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
++      while ( timeout-- && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) {
+               udelay(10);
+-
++      }
+       if (timeout == 0){
+               PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
+               return;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/smc911x.h linux-2.6.29-rc3.owrt/drivers/net/smc911x.h
+--- linux-2.6.29.owrt/drivers/net/smc911x.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/smc911x.h        2009-05-10 23:48:29.000000000 +0200
+@@ -42,16 +42,6 @@
+   #define SMC_USE_16BIT               0
+   #define SMC_USE_32BIT               1
+   #define SMC_IRQ_SENSE               IRQF_TRIGGER_LOW
+-#elif defined(CONFIG_ARCH_OMAP34XX)
+-  #define SMC_USE_16BIT               0
+-  #define SMC_USE_32BIT               1
+-  #define SMC_IRQ_SENSE               IRQF_TRIGGER_LOW
+-  #define SMC_MEM_RESERVED    1
+-#elif defined(CONFIG_ARCH_OMAP24XX)
+-  #define SMC_USE_16BIT               0
+-  #define SMC_USE_32BIT               1
+-  #define SMC_IRQ_SENSE               IRQF_TRIGGER_LOW
+-  #define SMC_MEM_RESERVED    1
+ #else
+ /*
+  * Default configuration
+@@ -685,7 +675,6 @@
+ #define CHIP_9116     0x0116
+ #define CHIP_9117     0x0117
+ #define CHIP_9118     0x0118
+-#define CHIP_9211     0x9211
+ #define CHIP_9215     0x115A
+ #define CHIP_9217     0x117A
+ #define CHIP_9218     0x118A
+@@ -700,7 +689,6 @@
+       { CHIP_9116, "LAN9116" },
+       { CHIP_9117, "LAN9117" },
+       { CHIP_9118, "LAN9118" },
+-      { CHIP_9211, "LAN9211" },
+       { CHIP_9215, "LAN9215" },
+       { CHIP_9217, "LAN9217" },
+       { CHIP_9218, "LAN9218" },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/smsc911x.c linux-2.6.29-rc3.owrt/drivers/net/smsc911x.c
+--- linux-2.6.29.owrt/drivers/net/smsc911x.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/smsc911x.c       2009-05-10 23:48:29.000000000 +0200
+@@ -953,7 +953,7 @@
+               do {
+                       udelay(1);
+                       val = smsc911x_reg_read(pdata, RX_DP_CTRL);
+-              } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_));
++              } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_));
+               if (unlikely(timeout == 0))
+                       SMSC_WARNING(HW, "Timed out waiting for "
+@@ -1225,10 +1225,6 @@
+       dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
+                (unsigned long)pdata->ioaddr, dev->irq);
+-      /* Reset the last known duplex and carrier */
+-      pdata->last_duplex = -1;
+-      pdata->last_carrier = -1;
+-
+       /* Bring the PHY up */
+       phy_start(pdata->phy_dev);
+@@ -1628,7 +1624,7 @@
+       do {
+               msleep(1);
+               e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
+-      } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
++      } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+       if (!timeout) {
+               SMSC_TRACE(DRV, "TIMED OUT");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/smsc9420.c linux-2.6.29-rc3.owrt/drivers/net/smsc9420.c
+--- linux-2.6.29.owrt/drivers/net/smsc9420.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/smsc9420.c       2009-05-10 23:48:29.000000000 +0200
+@@ -341,7 +341,7 @@
+       do {
+               msleep(1);
+               e2cmd = smsc9420_reg_read(pd, E2P_CMD);
+-      } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
++      } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+       if (!timeout) {
+               smsc_info(HW, "TIMED OUT");
+@@ -413,7 +413,6 @@
+       }
+       memcpy(data, &eeprom_data[eeprom->offset], len);
+-      eeprom->magic = SMSC9420_EEPROM_MAGIC;
+       eeprom->len = len;
+       return 0;
+ }
+@@ -424,9 +423,6 @@
+       struct smsc9420_pdata *pd = netdev_priv(dev);
+       int ret;
+-      if (eeprom->magic != SMSC9420_EEPROM_MAGIC)
+-              return -EINVAL;
+-
+       smsc9420_eeprom_enable_access(pd);
+       smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
+       ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
+@@ -502,7 +498,7 @@
+ static void smsc9420_stop_tx(struct smsc9420_pdata *pd)
+ {
+       u32 dmac_control, mac_cr, dma_intr_ena;
+-      int timeout = 1000;
++      int timeOut = 1000;
+       /* disable TX DMAC */
+       dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
+@@ -510,13 +506,13 @@
+       smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
+       /* Wait max 10ms for transmit process to stop */
+-      while (--timeout) {
++      while (timeOut--) {
+               if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_)
+                       break;
+               udelay(10);
+       }
+-      if (!timeout)
++      if (!timeOut)
+               smsc_warn(IFDOWN, "TX DMAC failed to stop");
+       /* ACK Tx DMAC stop bit */
+@@ -600,7 +596,7 @@
+ static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
+ {
+-      int timeout = 1000;
++      int timeOut = 1000;
+       u32 mac_cr, dmac_control, dma_intr_ena;
+       /* mask RX DMAC interrupts */
+@@ -621,13 +617,13 @@
+       smsc9420_pci_flush_write(pd);
+       /* wait up to 10ms for receive to stop */
+-      while (--timeout) {
++      while (timeOut--) {
+               if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_)
+                       break;
+               udelay(10);
+       }
+-      if (!timeout)
++      if (!timeOut)
+               smsc_warn(IFDOWN, "RX DMAC did not stop! timeout.");
+       /* ACK the Rx DMAC stop bit */
+@@ -1382,7 +1378,6 @@
+       /* test the IRQ connection to the ISR */
+       smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq);
+-      pd->software_irq_signal = false;
+       spin_lock_irqsave(&pd->int_lock, flags);
+       /* configure interrupt deassertion timer and enable interrupts */
+@@ -1398,6 +1393,8 @@
+       smsc9420_pci_flush_write(pd);
+       timeout = 1000;
++      pd->software_irq_signal = false;
++      smp_wmb();
+       while (timeout--) {
+               if (pd->software_irq_signal)
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/smsc9420.h linux-2.6.29-rc3.owrt/drivers/net/smsc9420.h
+--- linux-2.6.29.owrt/drivers/net/smsc9420.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/smsc9420.h       2009-05-10 23:48:29.000000000 +0200
+@@ -44,7 +44,6 @@
+ #define LAN_REGISTER_EXTENT           (0x400)
+ #define SMSC9420_EEPROM_SIZE          ((u32)11)
+-#define SMSC9420_EEPROM_MAGIC         (0x9420)
+ #define PKT_BUF_SZ                    (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sun3lance.c linux-2.6.29-rc3.owrt/drivers/net/sun3lance.c
+--- linux-2.6.29.owrt/drivers/net/sun3lance.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sun3lance.c      2009-05-10 23:48:29.000000000 +0200
+@@ -428,7 +428,7 @@
+       while (--i > 0)
+               if (DREG & CSR0_IDON)
+                       break;
+-      if (i <= 0 || (DREG & CSR0_ERR)) {
++      if (i < 0 || (DREG & CSR0_ERR)) {
+               DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
+                                         dev->name, i, DREG ));
+               DREG = CSR0_STOP;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sundance.c linux-2.6.29-rc3.owrt/drivers/net/sundance.c
+--- linux-2.6.29.owrt/drivers/net/sundance.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sundance.c       2009-05-10 23:48:29.000000000 +0200
+@@ -909,7 +909,7 @@
+                       printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
+                                  "negotiated capability %4.4x.\n", dev->name,
+                                  duplex ? "full" : "half", np->phys[0], negotiated);
+-              iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0);
++              iowrite16(ioread16(ioaddr + MACCtrl0) | duplex ? 0x20 : 0, ioaddr + MACCtrl0);
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sungem.c linux-2.6.29-rc3.owrt/drivers/net/sungem.c
+--- linux-2.6.29.owrt/drivers/net/sungem.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sungem.c 2009-05-10 23:48:29.000000000 +0200
+@@ -148,7 +148,7 @@
+       cmd |= (MIF_FRAME_TAMSB);
+       writel(cmd, gp->regs + MIF_FRAME);
+-      while (--limit) {
++      while (limit--) {
+               cmd = readl(gp->regs + MIF_FRAME);
+               if (cmd & MIF_FRAME_TALSB)
+                       break;
+@@ -1157,7 +1157,7 @@
+               if (limit-- <= 0)
+                       break;
+       }
+-      if (limit < 0)
++      if (limit <= 0)
+               printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+                      gp->dev->name);
+ }
+@@ -1229,7 +1229,7 @@
+                       break;
+       } while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
+-      if (limit < 0)
++      if (limit <= 0)
+               printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+       if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+@@ -2221,8 +2221,6 @@
+       gp->running = 1;
+-      napi_enable(&gp->napi);
+-
+       if (gp->lstate == link_up) {
+               netif_carrier_on(gp->dev);
+               gem_set_link_modes(gp);
+@@ -2240,8 +2238,6 @@
+               spin_lock_irqsave(&gp->lock, flags);
+               spin_lock(&gp->tx_lock);
+-              napi_disable(&gp->napi);
+-
+               gp->running =  0;
+               gem_reset(gp);
+               gem_clean_rings(gp);
+@@ -2342,6 +2338,8 @@
+       if (!gp->asleep)
+               rc = gem_do_start(dev);
+       gp->opened = (rc == 0);
++      if (gp->opened)
++              napi_enable(&gp->napi);
+       mutex_unlock(&gp->pm_mutex);
+@@ -2478,6 +2476,8 @@
+               /* Re-attach net device */
+               netif_device_attach(dev);
++
++              napi_enable(&gp->napi);
+       }
+       spin_lock_irqsave(&gp->lock, flags);
+@@ -2998,11 +2998,8 @@
+       .ndo_do_ioctl           = gem_ioctl,
+       .ndo_tx_timeout         = gem_tx_timeout,
+       .ndo_change_mtu         = gem_change_mtu,
++      .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+-      .ndo_set_mac_address    = gem_set_mac_address,
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+-      .ndo_poll_controller    = gem_poll_controller,
+-#endif
+ };
+ static int __devinit gem_init_one(struct pci_dev *pdev,
+@@ -3164,6 +3161,10 @@
+       dev->watchdog_timeo = 5 * HZ;
+       dev->irq = pdev->irq;
+       dev->dma = 0;
++      dev->set_mac_address = gem_set_mac_address;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++      dev->poll_controller = gem_poll_controller;
++#endif
+       /* Set that now, in case PM kicks in now */
+       pci_set_drvdata(pdev, dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sungem_phy.c linux-2.6.29-rc3.owrt/drivers/net/sungem_phy.c
+--- linux-2.6.29.owrt/drivers/net/sungem_phy.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sungem_phy.c     2009-05-10 23:48:29.000000000 +0200
+@@ -79,7 +79,7 @@
+       udelay(100);
+-      while (--limit) {
++      while (limit--) {
+               val = __phy_read(phy, phy_id, MII_BMCR);
+               if ((val & BMCR_RESET) == 0)
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sunhme.c linux-2.6.29-rc3.owrt/drivers/net/sunhme.c
+--- linux-2.6.29.owrt/drivers/net/sunhme.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sunhme.c 2009-05-10 23:48:29.000000000 +0200
+@@ -2543,36 +2543,25 @@
+ }
+ /* After all quattro cards have been probed, we call these functions
+- * to register the IRQ handlers for the cards that have been
+- * successfully probed and skip the cards that failed to initialize
++ * to register the IRQ handlers.
+  */
+-static int __init quattro_sbus_register_irqs(void)
++static void __init quattro_sbus_register_irqs(void)
+ {
+       struct quattro *qp;
+       for (qp = qfe_sbus_list; qp != NULL; qp = qp->next) {
+               struct of_device *op = qp->quattro_dev;
+-              int err, qfe_slot, skip = 0;
+-
+-              for (qfe_slot = 0; qfe_slot < 4; qfe_slot++) {
+-                      if (!qp->happy_meals[qfe_slot])
+-                              skip = 1;
+-              }
+-              if (skip)
+-                      continue;
++              int err;
+               err = request_irq(op->irqs[0],
+                                 quattro_sbus_interrupt,
+                                 IRQF_SHARED, "Quattro",
+                                 qp);
+               if (err != 0) {
+-                      printk(KERN_ERR "Quattro HME: IRQ registration "
+-                             "error %d.\n", err);
+-                      return err;
++                      printk(KERN_ERR "Quattro: Fatal IRQ registery error %d.\n", err);
++                      panic("QFE request irq");
+               }
+       }
+-
+-      return 0;
+ }
+ static void quattro_sbus_free_irqs(void)
+@@ -2581,14 +2570,6 @@
+       for (qp = qfe_sbus_list; qp != NULL; qp = qp->next) {
+               struct of_device *op = qp->quattro_dev;
+-              int qfe_slot, skip = 0;
+-
+-              for (qfe_slot = 0; qfe_slot < 4; qfe_slot++) {
+-                      if (!qp->happy_meals[qfe_slot])
+-                              skip = 1;
+-              }
+-              if (skip)
+-                      continue;
+               free_irq(op->irqs[0], qp);
+       }
+@@ -2648,12 +2629,6 @@
+       int i, qfe_slot = -1;
+       int err = -ENODEV;
+-      sbus_dp = to_of_device(op->dev.parent)->node;
+-
+-      /* We can match PCI devices too, do not accept those here. */
+-      if (strcmp(sbus_dp->name, "sbus"))
+-              return err;
+-
+       if (is_qfe) {
+               qp = quattro_sbus_find(op);
+               if (qp == NULL)
+@@ -2759,6 +2734,10 @@
+       if (qp != NULL)
+               hp->happy_flags |= HFLAG_QUATTRO;
++      sbus_dp = to_of_device(op->dev.parent)->node;
++      if (is_qfe)
++              sbus_dp = to_of_device(op->dev.parent->parent)->node;
++
+       /* Get the supported DVMA burst sizes from our Happy SBUS. */
+       hp->happy_bursts = of_getintprop_default(sbus_dp,
+                                                "burst-sizes", 0x00);
+@@ -2845,9 +2824,6 @@
+       if (hp->tcvregs)
+               of_iounmap(&op->resource[4], hp->tcvregs, TCVR_REG_SIZE);
+-      if (qp)
+-              qp->happy_meals[qfe_slot] = NULL;
+-
+ err_out_free_netdev:
+       free_netdev(dev);
+@@ -3305,7 +3281,7 @@
+       err = of_register_driver(&hme_sbus_driver, &of_bus_type);
+       if (!err)
+-              err = quattro_sbus_register_irqs();
++              quattro_sbus_register_irqs();
+       return err;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sunlance.c linux-2.6.29-rc3.owrt/drivers/net/sunlance.c
+--- linux-2.6.29.owrt/drivers/net/sunlance.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sunlance.c       2009-05-10 23:48:29.000000000 +0200
+@@ -343,7 +343,7 @@
+       ib->phys_addr [5] = dev->dev_addr [4];
+       /* Setup the Tx ring entries */
+-      for (i = 0; i < TX_RING_SIZE; i++) {
++      for (i = 0; i <= TX_RING_SIZE; i++) {
+               leptr = LANCE_ADDR(aib + libbuff_offset(tx_buf, i));
+               ib->btx_ring [i].tmd0      = leptr;
+               ib->btx_ring [i].tmd1_hadr = leptr >> 16;
+@@ -399,7 +399,7 @@
+       sbus_writeb(dev->dev_addr[4], &ib->phys_addr[5]);
+       /* Setup the Tx ring entries */
+-      for (i = 0; i < TX_RING_SIZE; i++) {
++      for (i = 0; i <= TX_RING_SIZE; i++) {
+               leptr = libbuff_offset(tx_buf, i);
+               sbus_writew(leptr,      &ib->btx_ring [i].tmd0);
+               sbus_writeb(leptr >> 16,&ib->btx_ring [i].tmd1_hadr);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/sunqe.c linux-2.6.29-rc3.owrt/drivers/net/sunqe.c
+--- linux-2.6.29.owrt/drivers/net/sunqe.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/sunqe.c  2009-05-10 23:48:29.000000000 +0200
+@@ -227,7 +227,7 @@
+       if (!(sbus_readb(mregs + MREGS_PHYCONFIG) & MREGS_PHYCONFIG_LTESTDIS)) {
+               int tries = 50;
+-              while (--tries) {
++              while (tries--) {
+                       u8 tmp;
+                       mdelay(5);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tg3.c linux-2.6.29-rc3.owrt/drivers/net/tg3.c
+--- linux-2.6.29.owrt/drivers/net/tg3.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tg3.c    2009-05-10 23:48:29.000000000 +0200
+@@ -852,7 +852,7 @@
+               }
+               udelay(10);
+       }
+-      if (limit < 0)
++      if (limit <= 0)
+               return -EBUSY;
+       return 0;
+@@ -1473,8 +1473,7 @@
+ {
+       u32 reg;
+-      if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+-          GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
++      if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+               return;
+       reg = MII_TG3_MISC_SHDW_WREN |
+@@ -1604,7 +1603,7 @@
+                               break;
+               }
+       }
+-      if (limit < 0)
++      if (limit <= 0)
+               return -EBUSY;
+       return 0;
+@@ -2238,8 +2237,8 @@
+                       phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask;
+                       if (phyid != TG3_PHY_ID_BCMAC131) {
+                               phyid &= TG3_PHY_OUI_MASK;
+-                              if (phyid == TG3_PHY_OUI_1 ||
+-                                  phyid == TG3_PHY_OUI_2 ||
++                              if (phyid == TG3_PHY_OUI_1 &&
++                                  phyid == TG3_PHY_OUI_2 &&
+                                   phyid == TG3_PHY_OUI_3)
+                                       do_low_power = true;
+                       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tokenring/tmspci.c linux-2.6.29-rc3.owrt/drivers/net/tokenring/tmspci.c
+--- linux-2.6.29.owrt/drivers/net/tokenring/tmspci.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tokenring/tmspci.c       2009-05-10 23:48:29.000000000 +0200
+@@ -121,6 +121,11 @@
+               goto err_out_trdev;
+       }
++      ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
++                        dev->name, dev);
++      if (ret)
++              goto err_out_region;
++
+       dev->base_addr  = pci_ioaddr;
+       dev->irq        = pci_irq_line;
+       dev->dma        = 0;
+@@ -137,7 +142,7 @@
+       ret = tmsdev_init(dev, &pdev->dev);
+       if (ret) {
+               printk("%s: unable to get memory for dev->priv.\n", dev->name);
+-              goto err_out_region;
++              goto err_out_irq;
+       }
+       tp = netdev_priv(dev);
+@@ -152,11 +157,6 @@
+       tp->tmspriv = cardinfo;
+-      ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+-                        dev->name, dev);
+-      if (ret)
+-              goto err_out_tmsdev;
+-
+       dev->open = tms380tr_open;
+       dev->stop = tms380tr_close;
+       pci_set_drvdata(pdev, dev);
+@@ -164,15 +164,15 @@
+       ret = register_netdev(dev);
+       if (ret)
+-              goto err_out_irq;
++              goto err_out_tmsdev;
+       
+       return 0;
+-err_out_irq:
+-      free_irq(pdev->irq, dev);
+ err_out_tmsdev:
+       pci_set_drvdata(pdev, NULL);
+       tmsdev_term(dev);
++err_out_irq:
++      free_irq(pdev->irq, dev);
+ err_out_region:
+       release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
+ err_out_trdev:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tsi108_eth.c linux-2.6.29-rc3.owrt/drivers/net/tsi108_eth.c
+--- linux-2.6.29.owrt/drivers/net/tsi108_eth.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tsi108_eth.c     2009-05-10 23:48:29.000000000 +0200
+@@ -1237,7 +1237,7 @@
+       spin_lock_irqsave(&phy_lock, flags);
+       tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
+-      while (--i) {
++      while (i--){
+               if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
+                       break;
+               udelay(10);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tulip/21142.c linux-2.6.29-rc3.owrt/drivers/net/tulip/21142.c
+--- linux-2.6.29.owrt/drivers/net/tulip/21142.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tulip/21142.c    2009-05-10 23:48:29.000000000 +0200
+@@ -9,11 +9,6 @@
+       Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
+       for more information on this driver.
+-
+-      DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
+-      Hardware Reference Manual" is currently available at :
+-      http://developer.intel.com/design/network/manuals/278074.htm
+-
+       Please submit bugs to http://bugzilla.kernel.org/ .
+ */
+@@ -37,11 +32,7 @@
+       int csr12 = ioread32(ioaddr + CSR12);
+       int next_tick = 60*HZ;
+       int new_csr6 = 0;
+-      int csr14 = ioread32(ioaddr + CSR14);
+-      /* CSR12[LS10,LS100] are not reliable during autonegotiation */
+-      if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+-              csr12 |= 6;
+       if (tulip_debug > 2)
+               printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
+                          dev->name, csr12, medianame[dev->if_port]);
+@@ -85,7 +76,7 @@
+                       new_csr6 = 0x83860000;
+                       dev->if_port = 3;
+                       iowrite32(0, ioaddr + CSR13);
+-                      iowrite32(0x0003FFFF, ioaddr + CSR14);
++                      iowrite32(0x0003FF7F, ioaddr + CSR14);
+                       iowrite16(8, ioaddr + CSR15);
+                       iowrite32(1, ioaddr + CSR13);
+               }
+@@ -141,14 +132,10 @@
+       struct tulip_private *tp = netdev_priv(dev);
+       void __iomem *ioaddr = tp->base_addr;
+       int csr12 = ioread32(ioaddr + CSR12);
+-      int csr14 = ioread32(ioaddr + CSR14);
+-      /* CSR12[LS10,LS100] are not reliable during autonegotiation */
+-      if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+-              csr12 |= 6;
+       if (tulip_debug > 1)
+               printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
+-                         "%8.8x.\n", dev->name, csr12, csr5, csr14);
++                         "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14));
+       /* If NWay finished and we have a negotiated partner capability. */
+       if (tp->nway  &&  !tp->nwayset  &&  (csr12 & 0x7000) == 0x5000) {
+@@ -156,9 +143,7 @@
+               int negotiated = tp->sym_advertise & (csr12 >> 16);
+               tp->lpar = csr12 >> 16;
+               tp->nwayset = 1;
+-              /* If partner cannot negotiate, it is 10Mbps Half Duplex */
+-              if (!(csr12 & 0x8000))          dev->if_port = 0;
+-              else if (negotiated & 0x0100)   dev->if_port = 5;
++              if (negotiated & 0x0100)                dev->if_port = 5;
+               else if (negotiated & 0x0080)   dev->if_port = 3;
+               else if (negotiated & 0x0040)   dev->if_port = 4;
+               else if (negotiated & 0x0020)   dev->if_port = 0;
+@@ -229,7 +214,7 @@
+                       tp->timer.expires = RUN_AT(3*HZ);
+                       add_timer(&tp->timer);
+               } else if (dev->if_port == 5)
+-                      iowrite32(csr14 & ~0x080, ioaddr + CSR14);
++                      iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14);
+       } else if (dev->if_port == 0  ||  dev->if_port == 4) {
+               if ((csr12 & 4) == 0)
+                       printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tulip/de2104x.c linux-2.6.29-rc3.owrt/drivers/net/tulip/de2104x.c
+--- linux-2.6.29.owrt/drivers/net/tulip/de2104x.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tulip/de2104x.c  2009-05-10 23:48:29.000000000 +0200
+@@ -392,7 +392,7 @@
+       unsigned drop = 0;
+       int rc;
+-      while (--rx_work) {
++      while (rx_work--) {
+               u32 status, len;
+               dma_addr_t mapping;
+               struct sk_buff *skb, *copy_skb;
+@@ -464,14 +464,13 @@
+                       drop = 1;
+ rx_next:
++              de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn);
+               if (rx_tail == (DE_RX_RING_SIZE - 1))
+                       de->rx_ring[rx_tail].opts2 =
+                               cpu_to_le32(RingEnd | de->rx_buf_sz);
+               else
+                       de->rx_ring[rx_tail].opts2 = cpu_to_le32(de->rx_buf_sz);
+               de->rx_ring[rx_tail].addr1 = cpu_to_le32(mapping);
+-              wmb();
+-              de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn);
+               rx_tail = NEXT_RX(rx_tail);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tulip/tulip_core.c linux-2.6.29-rc3.owrt/drivers/net/tulip/tulip_core.c
+--- linux-2.6.29.owrt/drivers/net/tulip/tulip_core.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tulip/tulip_core.c       2009-05-10 23:48:29.000000000 +0200
+@@ -255,7 +255,6 @@
+ static void tulip_tx_timeout(struct net_device *dev);
+ static void tulip_init_ring(struct net_device *dev);
+-static void tulip_free_ring(struct net_device *dev);
+ static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
+ static int tulip_open(struct net_device *dev);
+ static int tulip_close(struct net_device *dev);
+@@ -503,21 +502,16 @@
+ {
+       int retval;
+-      tulip_init_ring (dev);
++      if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev)))
++              return retval;
+-      retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev);
+-      if (retval)
+-              goto free_ring;
++      tulip_init_ring (dev);
+       tulip_up (dev);
+       netif_start_queue (dev);
+       return 0;
+-
+-free_ring:
+-      tulip_free_ring (dev);
+-      return retval;
+ }
+@@ -774,11 +768,23 @@
+       tulip_set_power_state (tp, 0, 1);
+ }
+-static void tulip_free_ring (struct net_device *dev)
++
++static int tulip_close (struct net_device *dev)
+ {
+       struct tulip_private *tp = netdev_priv(dev);
++      void __iomem *ioaddr = tp->base_addr;
+       int i;
++      netif_stop_queue (dev);
++
++      tulip_down (dev);
++
++      if (tulip_debug > 1)
++              printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
++                      dev->name, ioread32 (ioaddr + CSR5));
++
++      free_irq (dev->irq, dev);
++
+       /* Free all the skbuffs in the Rx queue. */
+       for (i = 0; i < RX_RING_SIZE; i++) {
+               struct sk_buff *skb = tp->rx_buffers[i].skb;
+@@ -797,7 +803,6 @@
+                       dev_kfree_skb (skb);
+               }
+       }
+-
+       for (i = 0; i < TX_RING_SIZE; i++) {
+               struct sk_buff *skb = tp->tx_buffers[i].skb;
+@@ -809,24 +814,6 @@
+               tp->tx_buffers[i].skb = NULL;
+               tp->tx_buffers[i].mapping = 0;
+       }
+-}
+-
+-static int tulip_close (struct net_device *dev)
+-{
+-      struct tulip_private *tp = netdev_priv(dev);
+-      void __iomem *ioaddr = tp->base_addr;
+-
+-      netif_stop_queue (dev);
+-
+-      tulip_down (dev);
+-
+-      if (tulip_debug > 1)
+-              printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+-                      dev->name, ioread32 (ioaddr + CSR5));
+-
+-      free_irq (dev->irq, dev);
+-
+-      tulip_free_ring (dev);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/tun.c linux-2.6.29-rc3.owrt/drivers/net/tun.c
+--- linux-2.6.29.owrt/drivers/net/tun.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/tun.c    2009-05-10 23:48:29.000000000 +0200
+@@ -157,16 +157,10 @@
+       nexact = n;
+-      /* Remaining multicast addresses are hashed,
+-       * unicast will leave the filter disabled. */
++      /* The rest is hashed */
+       memset(filter->mask, 0, sizeof(filter->mask));
+-      for (; n < uf.count; n++) {
+-              if (!is_multicast_ether_addr(addr[n].u)) {
+-                      err = 0; /* no filter */
+-                      goto done;
+-              }
++      for (; n < uf.count; n++)
+               addr_hash_set(filter->mask, addr[n].u);
+-      }
+       /* For ALLMULTI just set the mask to all ones.
+        * This overrides the mask populated above. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ucc_geth.c linux-2.6.29-rc3.owrt/drivers/net/ucc_geth.c
+--- linux-2.6.29.owrt/drivers/net/ucc_geth.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ucc_geth.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1536,15 +1536,17 @@
+ static int init_phy(struct net_device *dev)
+ {
+       struct ucc_geth_private *priv = netdev_priv(dev);
+-      struct ucc_geth_info *ug_info = priv->ug_info;
+       struct phy_device *phydev;
++      char phy_id[BUS_ID_SIZE];
+       priv->oldlink = 0;
+       priv->oldspeed = 0;
+       priv->oldduplex = -1;
+-      phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
+-                           priv->phy_interface);
++      snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
++               priv->ug_info->phy_address);
++
++      phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
+       if (IS_ERR(phydev)) {
+               printk("%s: Could not attach to PHY\n", dev->name);
+@@ -3612,12 +3614,10 @@
+       ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
+       fixed_link = of_get_property(np, "fixed-link", NULL);
+       if (fixed_link) {
+-              snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+-                       PHY_ID_FMT, "0", fixed_link[0]);
++              snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
++              ug_info->phy_address = fixed_link[0];
+               phy = NULL;
+       } else {
+-              char bus_name[MII_BUS_ID_SIZE];
+-
+               ph = of_get_property(np, "phy-handle", NULL);
+               phy = of_find_node_by_phandle(*ph);
+@@ -3628,6 +3628,7 @@
+               prop = of_get_property(phy, "reg", NULL);
+               if (prop == NULL)
+                       return -1;
++              ug_info->phy_address = *prop;
+               /* Set the bus id */
+               mdio = of_get_parent(phy);
+@@ -3641,9 +3642,7 @@
+               if (err)
+                       return -1;
+-              uec_mdio_bus_name(bus_name, mdio);
+-              snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+-                      "%s:%02x", bus_name, *prop);
++              snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start);
+       }
+       /* get the phy interface type, or default to MII */
+@@ -3749,7 +3748,6 @@
+       ugeth->ug_info = ug_info;
+       ugeth->dev = dev;
+-      ugeth->node = np;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ucc_geth.h linux-2.6.29-rc3.owrt/drivers/net/ucc_geth.h
+--- linux-2.6.29.owrt/drivers/net/ucc_geth.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ucc_geth.h       2009-05-10 23:48:29.000000000 +0200
+@@ -1091,7 +1091,8 @@
+       u32 eventRegMask;
+       u16 pausePeriod;
+       u16 extensionField;
+-      char phy_bus_id[BUS_ID_SIZE];
++      u8 phy_address;
++      char mdio_bus[MII_BUS_ID_SIZE];
+       u8 weightfactor[NUM_TX_QUEUES];
+       u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
+       u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
+@@ -1185,8 +1186,6 @@
+       int oldspeed;
+       int oldduplex;
+       int oldlink;
+-
+-      struct device_node *node;
+ };
+ void uec_set_ethtool_ops(struct net_device *netdev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ucc_geth_mii.c linux-2.6.29-rc3.owrt/drivers/net/ucc_geth_mii.c
+--- linux-2.6.29.owrt/drivers/net/ucc_geth_mii.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ucc_geth_mii.c   2009-05-10 23:48:29.000000000 +0200
+@@ -107,7 +107,7 @@
+ static int uec_mdio_reset(struct mii_bus *bus)
+ {
+       struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
+-      int timeout = PHY_INIT_TIMEOUT;
++      unsigned int timeout = PHY_INIT_TIMEOUT;
+       mutex_lock(&bus->mdio_lock);
+@@ -123,7 +123,7 @@
+       mutex_unlock(&bus->mdio_lock);
+-      if (timeout < 0) {
++      if (timeout <= 0) {
+               printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
+               return -EBUSY;
+       }
+@@ -156,7 +156,7 @@
+       if (err)
+               goto reg_map_fail;
+-      uec_mdio_bus_name(new_bus->id, np);
++      snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+       new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
+@@ -283,13 +283,3 @@
+ {
+       of_unregister_platform_driver(&uec_mdio_driver);
+ }
+-
+-void uec_mdio_bus_name(char *name, struct device_node *np)
+-{
+-        const u32 *reg;
+-
+-        reg = of_get_property(np, "reg", NULL);
+-
+-        snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+-}
+-
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/ucc_geth_mii.h linux-2.6.29-rc3.owrt/drivers/net/ucc_geth_mii.h
+--- linux-2.6.29.owrt/drivers/net/ucc_geth_mii.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/ucc_geth_mii.h   2009-05-10 23:48:29.000000000 +0200
+@@ -97,5 +97,4 @@
+ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
+ int __init uec_mdio_init(void);
+ void uec_mdio_exit(void);
+-void uec_mdio_bus_name(char *name, struct device_node *np);
+ #endif                                /* __UEC_MII_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/asix.c linux-2.6.29-rc3.owrt/drivers/net/usb/asix.c
+--- linux-2.6.29.owrt/drivers/net/usb/asix.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/asix.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1451,14 +1451,6 @@
+       // Cables-to-Go USB Ethernet Adapter
+       USB_DEVICE(0x0b95, 0x772a),
+       .driver_info = (unsigned long) &ax88772_info,
+-}, {
+-      // ABOCOM for pci
+-      USB_DEVICE(0x14ea, 0xab11),
+-      .driver_info = (unsigned long) &ax88178_info,
+-}, {
+-      // ASIX 88772a
+-      USB_DEVICE(0x0db0, 0xa877),
+-      .driver_info = (unsigned long) &ax88772_info,
+ },
+       { },            // END
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/cdc_ether.c linux-2.6.29-rc3.owrt/drivers/net/usb/cdc_ether.c
+--- linux-2.6.29.owrt/drivers/net/usb/cdc_ether.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/cdc_ether.c  2009-05-10 23:48:29.000000000 +0200
+@@ -559,11 +559,6 @@
+       USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+                       USB_CDC_PROTO_NONE),
+       .driver_info = (unsigned long) &cdc_info,
+-}, {
+-      /* Ericsson F3507g */
+-      USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
+-                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+-      .driver_info = (unsigned long) &cdc_info,
+ },
+       { },            // END
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/dm9601.c linux-2.6.29-rc3.owrt/drivers/net/usb/dm9601.c
+--- linux-2.6.29.owrt/drivers/net/usb/dm9601.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/dm9601.c     2009-05-10 23:48:29.000000000 +0200
+@@ -635,10 +635,6 @@
+       USB_DEVICE(0x0a47, 0x9601),     /* Hirose USB-100 */
+       .driver_info = (unsigned long)&dm9601_info,
+        },
+-      {
+-      USB_DEVICE(0x0fe6, 0x8101),     /* DM9601 USB to Fast Ethernet Adapter */
+-      .driver_info = (unsigned long)&dm9601_info,
+-       },
+       {},                     // END
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/hso.c linux-2.6.29-rc3.owrt/drivers/net/usb/hso.c
+--- linux-2.6.29.owrt/drivers/net/usb/hso.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/hso.c        2009-05-10 23:48:29.000000000 +0200
+@@ -455,7 +455,6 @@
+       {icon321_port_device(0x0af0, 0xd033)},  /* Icon-322 */
+       {USB_DEVICE(0x0af0, 0x7301)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7361)},           /* GE40x */
+-      {USB_DEVICE(0x0af0, 0x7381)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7401)},           /* GI 0401 */
+       {USB_DEVICE(0x0af0, 0x7501)},           /* GTM 382 */
+       {USB_DEVICE(0x0af0, 0x7601)},           /* GE40x */
+@@ -463,8 +462,7 @@
+       {USB_DEVICE(0x0af0, 0x7801)},
+       {USB_DEVICE(0x0af0, 0x7901)},
+       {USB_DEVICE(0x0af0, 0x7361)},
+-      {USB_DEVICE(0x0af0, 0xd057)},
+-      {USB_DEVICE(0x0af0, 0xd055)},
++      {icon321_port_device(0x0af0, 0xd051)},
+       {}
+ };
+ MODULE_DEVICE_TABLE(usb, hso_ids);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/usbnet.c linux-2.6.29-rc3.owrt/drivers/net/usb/usbnet.c
+--- linux-2.6.29.owrt/drivers/net/usb/usbnet.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/usbnet.c     2009-05-10 23:48:29.000000000 +0200
+@@ -723,8 +723,8 @@
+       if (dev->mii.mdio_read)
+               return mii_link_ok(&dev->mii);
+-      /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+-      return ethtool_op_get_link(net);
++      /* Otherwise, say we're up (to avoid breaking scripts) */
++      return 1;
+ }
+ EXPORT_SYMBOL_GPL(usbnet_get_link);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/usb/zaurus.c linux-2.6.29-rc3.owrt/drivers/net/usb/zaurus.c
+--- linux-2.6.29.owrt/drivers/net/usb/zaurus.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/usb/zaurus.c     2009-05-10 23:48:29.000000000 +0200
+@@ -341,11 +341,6 @@
+       USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
+                       USB_CDC_PROTO_NONE),
+       .driver_info = (unsigned long) &bogus_mdlm_info,
+-}, {
+-      /* Motorola MOTOMAGX phones */
+-      USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+-                      USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+-      .driver_info = (unsigned long) &bogus_mdlm_info,
+ },
+ /* Olympus has some models with a Zaurus-compatible option.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/veth.c linux-2.6.29-rc3.owrt/drivers/net/veth.c
+--- linux-2.6.29.owrt/drivers/net/veth.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/veth.c   2009-05-10 23:48:29.000000000 +0200
+@@ -239,16 +239,6 @@
+       return 0;
+ }
+-static int veth_close(struct net_device *dev)
+-{
+-      struct veth_priv *priv = netdev_priv(dev);
+-
+-      netif_carrier_off(dev);
+-      netif_carrier_off(priv->peer);
+-
+-      return 0;
+-}
+-
+ static int veth_dev_init(struct net_device *dev)
+ {
+       struct veth_net_stats *stats;
+@@ -273,12 +263,10 @@
+ }
+ static const struct net_device_ops veth_netdev_ops = {
+-      .ndo_init            = veth_dev_init,
+-      .ndo_open            = veth_open,
+-      .ndo_stop            = veth_close,
+-      .ndo_start_xmit      = veth_xmit,
+-      .ndo_get_stats       = veth_get_stats,
+-      .ndo_set_mac_address = eth_mac_addr,
++      .ndo_init       = veth_dev_init,
++      .ndo_open       = veth_open,
++      .ndo_start_xmit = veth_xmit,
++      .ndo_get_stats  = veth_get_stats,
+ };
+ static void veth_setup(struct net_device *dev)
+@@ -291,6 +279,44 @@
+       dev->destructor = veth_dev_free;
+ }
++static void veth_change_state(struct net_device *dev)
++{
++      struct net_device *peer;
++      struct veth_priv *priv;
++
++      priv = netdev_priv(dev);
++      peer = priv->peer;
++
++      if (netif_carrier_ok(peer)) {
++              if (!netif_carrier_ok(dev))
++                      netif_carrier_on(dev);
++      } else {
++              if (netif_carrier_ok(dev))
++                      netif_carrier_off(dev);
++      }
++}
++
++static int veth_device_event(struct notifier_block *unused,
++                           unsigned long event, void *ptr)
++{
++      struct net_device *dev = ptr;
++
++      if (dev->netdev_ops->ndo_open != veth_open)
++              goto out;
++
++      switch (event) {
++      case NETDEV_CHANGE:
++              veth_change_state(dev);
++              break;
++      }
++out:
++      return NOTIFY_DONE;
++}
++
++static struct notifier_block veth_notifier_block __read_mostly = {
++      .notifier_call  = veth_device_event,
++};
++
+ /*
+  * netlink interface
+  */
+@@ -441,12 +467,14 @@
+ static __init int veth_init(void)
+ {
++      register_netdevice_notifier(&veth_notifier_block);
+       return rtnl_link_register(&veth_link_ops);
+ }
+ static __exit void veth_exit(void)
+ {
+       rtnl_link_unregister(&veth_link_ops);
++      unregister_netdevice_notifier(&veth_notifier_block);
+ }
+ module_init(veth_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/via-velocity.c linux-2.6.29-rc3.owrt/drivers/net/via-velocity.c
+--- linux-2.6.29.owrt/drivers/net/via-velocity.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/via-velocity.c   2009-05-10 23:48:29.000000000 +0200
+@@ -1838,19 +1838,17 @@
+ {
+       struct sk_buff *skb = tdinfo->skb;
+       int i;
+-      int pktlen;
+       /*
+        *      Don't unmap the pre-allocated tx_bufs
+        */
+       if (tdinfo->skb_dma) {
+-              pktlen = (skb->len > ETH_ZLEN ? : ETH_ZLEN);
+               for (i = 0; i < tdinfo->nskb_dma; i++) {
+ #ifdef VELOCITY_ZERO_COPY_SUPPORT
+                       pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
+ #else
+-                      pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
++                      pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE);
+ #endif
+                       tdinfo->skb_dma[i] = 0;
+               }
+@@ -2082,14 +2080,17 @@
+       struct tx_desc *td_ptr;
+       struct velocity_td_info *tdinfo;
+       unsigned long flags;
+-      int pktlen;
++      int pktlen = skb->len;
+       __le16 len;
+       int index;
+-      if (skb_padto(skb, ETH_ZLEN))
+-              goto out;
+-      pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
++
++      if (skb->len < ETH_ZLEN) {
++              if (skb_padto(skb, ETH_ZLEN))
++                      goto out;
++              pktlen = ETH_ZLEN;
++      }
+       len = cpu_to_le16(pktlen);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/virtio_net.c linux-2.6.29-rc3.owrt/drivers/net/virtio_net.c
+--- linux-2.6.29.owrt/drivers/net/virtio_net.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/virtio_net.c     2009-05-10 23:48:29.000000000 +0200
+@@ -287,7 +287,7 @@
+               skb_put(skb, MAX_PACKET_LEN);
+               hdr = skb_vnet_hdr(skb);
+-              sg_set_buf(sg, hdr, sizeof(*hdr));
++              sg_init_one(sg, hdr, sizeof(*hdr));
+               if (vi->big_packets) {
+                       for (i = 0; i < MAX_SKB_FRAGS; i++) {
+@@ -488,9 +488,9 @@
+       /* Encode metadata header at front. */
+       if (vi->mergeable_rx_bufs)
+-              sg_set_buf(sg, mhdr, sizeof(*mhdr));
++              sg_init_one(sg, mhdr, sizeof(*mhdr));
+       else
+-              sg_set_buf(sg, hdr, sizeof(*hdr));
++              sg_init_one(sg, hdr, sizeof(*hdr));
+       num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
+@@ -612,7 +612,6 @@
+       .set_tx_csum = virtnet_set_tx_csum,
+       .set_sg = ethtool_op_set_sg,
+       .set_tso = ethtool_op_set_tso,
+-      .get_link = ethtool_op_get_link,
+ };
+ #define MIN_MTU 68
+@@ -740,8 +739,6 @@
+               goto unregister;
+       }
+-      netif_carrier_on(dev);
+-
+       pr_debug("virtnet: registered device %s\n", dev->name);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wimax/i2400m/debugfs.c linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/debugfs.c
+--- linux-2.6.29.owrt/drivers/net/wimax/i2400m/debugfs.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/debugfs.c   2009-05-10 23:48:29.000000000 +0200
+@@ -234,6 +234,20 @@
+                                  &fops_i2400m_reset);
+ }
++/*
++ * Debug levels control; see debug.h
++ */
++struct d_level D_LEVEL[] = {
++      D_SUBMODULE_DEFINE(control),
++      D_SUBMODULE_DEFINE(driver),
++      D_SUBMODULE_DEFINE(debugfs),
++      D_SUBMODULE_DEFINE(fw),
++      D_SUBMODULE_DEFINE(netdev),
++      D_SUBMODULE_DEFINE(rfkill),
++      D_SUBMODULE_DEFINE(rx),
++      D_SUBMODULE_DEFINE(tx),
++};
++size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+ #define __debugfs_register(prefix, name, parent)                      \
+ do {                                                                  \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wimax/i2400m/driver.c linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/driver.c
+--- linux-2.6.29.owrt/drivers/net/wimax/i2400m/driver.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/driver.c    2009-05-10 23:48:29.000000000 +0200
+@@ -707,22 +707,6 @@
+ EXPORT_SYMBOL_GPL(i2400m_release);
+-/*
+- * Debug levels control; see debug.h
+- */
+-struct d_level D_LEVEL[] = {
+-      D_SUBMODULE_DEFINE(control),
+-      D_SUBMODULE_DEFINE(driver),
+-      D_SUBMODULE_DEFINE(debugfs),
+-      D_SUBMODULE_DEFINE(fw),
+-      D_SUBMODULE_DEFINE(netdev),
+-      D_SUBMODULE_DEFINE(rfkill),
+-      D_SUBMODULE_DEFINE(rx),
+-      D_SUBMODULE_DEFINE(tx),
+-};
+-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+-
+-
+ static
+ int __init i2400m_driver_init(void)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wimax/i2400m/i2400m.h linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/i2400m.h
+--- linux-2.6.29.owrt/drivers/net/wimax/i2400m/i2400m.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wimax/i2400m/i2400m.h    2009-05-10 23:48:29.000000000 +0200
+@@ -157,7 +157,7 @@
+ /* Firmware version we request when pulling the fw image file */
+-#define I2400M_FW_VERSION "1.4"
++#define I2400M_FW_VERSION "1.3"
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/ath5k/base.c linux-2.6.29-rc3.owrt/drivers/net/wireless/ath5k/base.c
+--- linux-2.6.29.owrt/drivers/net/wireless/ath5k/base.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/ath5k/base.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1028,8 +1028,6 @@
+  * it's done by reseting the chip.  To accomplish this we must
+  * first cleanup any pending DMA, then restart stuff after a la
+  * ath5k_init.
+- *
+- * Called with sc->lock.
+  */
+ static int
+ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+@@ -1098,42 +1096,6 @@
+ * Buffers setup *
+ \***************/
+-static
+-struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
+-{
+-      struct sk_buff *skb;
+-      unsigned int off;
+-
+-      /*
+-       * Allocate buffer with headroom_needed space for the
+-       * fake physical layer header at the start.
+-       */
+-      skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
+-
+-      if (!skb) {
+-              ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
+-                              sc->rxbufsize + sc->cachelsz - 1);
+-              return NULL;
+-      }
+-      /*
+-       * Cache-line-align.  This is important (for the
+-       * 5210 at least) as not doing so causes bogus data
+-       * in rx'd frames.
+-       */
+-      off = ((unsigned long)skb->data) % sc->cachelsz;
+-      if (off != 0)
+-              skb_reserve(skb, sc->cachelsz - off);
+-
+-      *skb_addr = pci_map_single(sc->pdev,
+-              skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
+-      if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+-              ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
+-              dev_kfree_skb(skb);
+-              return NULL;
+-      }
+-      return skb;
+-}
+-
+ static int
+ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+ {
+@@ -1141,11 +1103,37 @@
+       struct sk_buff *skb = bf->skb;
+       struct ath5k_desc *ds;
+-      if (!skb) {
+-              skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
+-              if (!skb)
++      if (likely(skb == NULL)) {
++              unsigned int off;
++
++              /*
++               * Allocate buffer with headroom_needed space for the
++               * fake physical layer header at the start.
++               */
++              skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
++              if (unlikely(skb == NULL)) {
++                      ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
++                                      sc->rxbufsize + sc->cachelsz - 1);
+                       return -ENOMEM;
++              }
++              /*
++               * Cache-line-align.  This is important (for the
++               * 5210 at least) as not doing so causes bogus data
++               * in rx'd frames.
++               */
++              off = ((unsigned long)skb->data) % sc->cachelsz;
++              if (off != 0)
++                      skb_reserve(skb, sc->cachelsz - off);
++
+               bf->skb = skb;
++              bf->skbaddr = pci_map_single(sc->pdev,
++                      skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
++              if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
++                      ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
++                      dev_kfree_skb(skb);
++                      bf->skb = NULL;
++                      return -ENOMEM;
++              }
+       }
+       /*
+@@ -1674,8 +1662,7 @@
+ {
+       struct ieee80211_rx_status rxs = {};
+       struct ath5k_rx_status rs = {};
+-      struct sk_buff *skb, *next_skb;
+-      dma_addr_t next_skb_addr;
++      struct sk_buff *skb;
+       struct ath5k_softc *sc = (void *)data;
+       struct ath5k_buf *bf, *bf_last;
+       struct ath5k_desc *ds;
+@@ -1760,17 +1747,10 @@
+                               goto next;
+               }
+ accept:
+-              next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
+-
+-              /*
+-               * If we can't replace bf->skb with a new skb under memory
+-               * pressure, just skip this packet
+-               */
+-              if (!next_skb)
+-                      goto next;
+-
+               pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+                               PCI_DMA_FROMDEVICE);
++              bf->skb = NULL;
++
+               skb_put(skb, rs.rs_datalen);
+               /* The MAC header is padded to have 32-bit boundary if the
+@@ -1843,9 +1823,6 @@
+                       ath5k_check_ibss_tsf(sc, skb, &rxs);
+               __ieee80211_rx(sc->hw, skb, &rxs);
+-
+-              bf->skb = next_skb;
+-              bf->skbaddr = next_skb_addr;
+ next:
+               list_move_tail(&bf->list, &sc->rxbuf);
+       } while (ath5k_rxbuf_setup(sc, bf) == 0);
+@@ -2837,17 +2814,11 @@
+ {
+       struct ath5k_softc *sc = hw->priv;
+       struct ieee80211_conf *conf = &hw->conf;
+-      int ret;
+-
+-      mutex_lock(&sc->lock);
+       sc->bintval = conf->beacon_int;
+       sc->power_level = conf->power_level;
+-      ret = ath5k_chan_set(sc, conf->channel);
+-
+-      mutex_unlock(&sc->lock);
+-      return ret;
++      return ath5k_chan_set(sc, conf->channel);
+ }
+ static int
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/ath9k/ath9k.h linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/ath9k.h
+--- linux-2.6.29.owrt/drivers/net/wireless/ath9k/ath9k.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/ath9k.h   2009-05-10 23:48:29.000000000 +0200
+@@ -587,8 +587,8 @@
+       u8 iso[3];
+ };
+-#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+-#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
++#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
++#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+ #define SM(_v, _f)  (((_v) << _f##_S) & _f)
+ #define MS(_v, _f)  (((_v) & _f) >> _f##_S)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/ath9k/core.h linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/core.h
+--- linux-2.6.29.owrt/drivers/net/wireless/ath9k/core.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/core.h    2009-05-10 23:48:29.000000000 +0200
+@@ -701,7 +701,6 @@
+       struct ath_hal *sc_ah;
+       void __iomem *mem;
+       spinlock_t sc_resetlock;
+-      spinlock_t sc_serial_rw;
+       struct mutex mutex;
+       u8 sc_curbssid[ETH_ALEN];
+@@ -752,36 +751,4 @@
+ int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
+ int ath_cabq_update(struct ath_softc *);
+-/*
+- * Read and write, they both share the same lock. We do this to serialize
+- * reads and writes on Atheros 802.11n PCI devices only. This is required
+- * as the FIFO on these devices can only accept sanely 2 requests. After
+- * that the device goes bananas. Serializing the reads/writes prevents this
+- * from happening.
+- */
+-
+-static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+-{
+-      if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+-              unsigned long flags;
+-              spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+-              iowrite32(val, ah->ah_sc->mem + reg_offset);
+-              spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+-      } else
+-              iowrite32(val, ah->ah_sc->mem + reg_offset);
+-}
+-
+-static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+-{
+-      u32 val;
+-      if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+-              unsigned long flags;
+-              spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+-              val = ioread32(ah->ah_sc->mem + reg_offset);
+-              spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+-      } else
+-              val = ioread32(ah->ah_sc->mem + reg_offset);
+-      return val;
+-}
+-
+ #endif /* CORE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/ath9k/hw.c linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/hw.c
+--- linux-2.6.29.owrt/drivers/net/wireless/ath9k/hw.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/hw.c      2009-05-10 23:48:29.000000000 +0200
+@@ -437,25 +437,6 @@
+       }
+       ah->ah_config.intr_mitigation = 1;
+-
+-      /*
+-       * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+-       * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+-       * This means we use it for all AR5416 devices, and the few
+-       * minor PCI AR9280 devices out there.
+-       *
+-       * Serialization is required because these devices do not handle
+-       * well the case of two concurrent reads/writes due to the latency
+-       * involved. During one read/write another read/write can be issued
+-       * on another CPU while the previous read/write may still be working
+-       * on our hardware, if we hit this case the hardware poops in a loop.
+-       * We prevent this by serializing reads and writes.
+-       *
+-       * This issue is not present on PCI-Express devices or pre-AR5416
+-       * devices (legacy, 802.11abg).
+-       */
+-      if (num_possible_cpus() > 1)
+-              ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
+ }
+ static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
+@@ -687,8 +668,7 @@
+       }
+       if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
+-              if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI ||
+-                  (AR_SREV_9280(ah) && !ah->ah_isPciExpress)) {
++              if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+                       ah->ah_config.serialize_regmode =
+                               SER_REG_MODE_ON;
+               } else {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/ath9k/main.c linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/main.c
+--- linux-2.6.29.owrt/drivers/net/wireless/ath9k/main.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/ath9k/main.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1336,7 +1336,6 @@
+               printk(KERN_ERR "Unable to create debugfs files\n");
+       spin_lock_init(&sc->sc_resetlock);
+-      spin_lock_init(&sc->sc_serial_rw);
+       mutex_init(&sc->mutex);
+       tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+       tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
+@@ -1539,7 +1538,6 @@
+ bad:
+       if (ah)
+               ath9k_hw_detach(ah);
+-      ath9k_exit_debug(sc);
+       return error;
+ }
+@@ -1547,7 +1545,7 @@
+ static int ath_attach(u16 devid, struct ath_softc *sc)
+ {
+       struct ieee80211_hw *hw = sc->hw;
+-      int error = 0, i;
++      int error = 0;
+       DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
+@@ -1591,11 +1589,11 @@
+       /* initialize tx/rx engine */
+       error = ath_tx_init(sc, ATH_TXBUF);
+       if (error != 0)
+-              goto error_attach;
++              goto detach;
+       error = ath_rx_init(sc, ATH_RXBUF);
+       if (error != 0)
+-              goto error_attach;
++              goto detach;
+ #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+       /* Initialze h/w Rfkill */
+@@ -1603,9 +1601,8 @@
+               INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
+       /* Initialize s/w rfkill */
+-      error = ath_init_sw_rfkill(sc);
+-      if (error)
+-              goto error_attach;
++      if (ath_init_sw_rfkill(sc))
++              goto detach;
+ #endif
+       error = ieee80211_register_hw(hw);
+@@ -1614,16 +1611,8 @@
+       ath_init_leds(sc);
+       return 0;
+-
+-error_attach:
+-      /* cleanup tx queues */
+-      for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+-              if (ATH_TXQ_SETUP(sc, i))
+-                      ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+-
+-      ath9k_hw_detach(sc->sc_ah);
+-      ath9k_exit_debug(sc);
+-
++detach:
++      ath_detach(sc);
+       return error;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl3945-base.c linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl3945-base.c
+--- linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl3945-base.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl3945-base.c  2009-05-10 23:48:29.000000000 +0200
+@@ -7911,7 +7911,7 @@
+                               CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+       if (err < 0) {
+               IWL_DEBUG_INFO("Failed to init the card\n");
+-              goto out_iounmap;
++              goto out_remove_sysfs;
+       }
+       /***********************
+@@ -7921,7 +7921,7 @@
+       err = iwl3945_eeprom_init(priv);
+       if (err) {
+               IWL_ERROR("Unable to init EEPROM\n");
+-              goto out_iounmap;
++              goto out_remove_sysfs;
+       }
+       /* MAC Address location in EEPROM same for 3945/4965 */
+       get_eeprom_mac(priv, priv->mac_addr);
+@@ -7975,7 +7975,7 @@
+       err = iwl3945_init_channel_map(priv);
+       if (err) {
+               IWL_ERROR("initializing regulatory failed: %d\n", err);
+-              goto out_unset_hw_setting;
++              goto out_release_irq;
+       }
+       err = iwl3945_init_geos(priv);
+@@ -8045,22 +8045,25 @@
+       return 0;
+  out_remove_sysfs:
+-      destroy_workqueue(priv->workqueue);
+-      priv->workqueue = NULL;
+       sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+  out_free_geos:
+       iwl3945_free_geos(priv);
+  out_free_channel_map:
+       iwl3945_free_channel_map(priv);
+- out_unset_hw_setting:
++
++
++ out_release_irq:
++      destroy_workqueue(priv->workqueue);
++      priv->workqueue = NULL;
+       iwl3945_unset_hw_setting(priv);
++
+  out_iounmap:
+       pci_iounmap(pdev, priv->hw_base);
+  out_pci_release_regions:
+       pci_release_regions(pdev);
+  out_pci_disable_device:
+-      pci_set_drvdata(pdev, NULL);
+       pci_disable_device(pdev);
++      pci_set_drvdata(pdev, NULL);
+  out_ieee80211_free_hw:
+       ieee80211_free_hw(priv->hw);
+  out:
+@@ -8140,19 +8143,6 @@
+               priv->is_open = 1;
+       }
+-      /* pci driver assumes state will be saved in this function.
+-       * pci state is saved and device disabled when interface is
+-       * stopped, so at this time pci device will always be disabled -
+-       * whether interface was started or not. saving pci state now will
+-       * cause saved state be that of a disabled device, which will cause
+-       * problems during resume in that we will end up with a disabled device.
+-       *
+-       * indicate that the current saved state (from when interface was
+-       * stopped) is valid. if interface was never up at time of suspend
+-       * then the saved state will still be valid as it was saved during
+-       * .probe. */
+-      pdev->state_saved = true;
+-
+       pci_set_power_state(pdev, PCI_D3hot);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-agn.c linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-agn.c
+--- linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-agn.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-agn.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1719,10 +1719,6 @@
+       priv->ucode_data_backup.len = data_size;
+       iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+-      if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+-          !priv->ucode_data_backup.v_addr)
+-              goto err_pci_alloc;
+-
+       /* Initialization instructions and data */
+       if (init_size && init_data_size) {
+               priv->ucode_init.len = init_size;
+@@ -3868,7 +3864,7 @@
+       }
+       err = iwl_eeprom_check_version(priv);
+       if (err)
+-              goto out_free_eeprom;
++              goto out_iounmap;
+       /* extract MAC Address */
+       iwl_eeprom_get_mac(priv, priv->mac_addr);
+@@ -3945,8 +3941,6 @@
+       return 0;
+  out_remove_sysfs:
+-      destroy_workqueue(priv->workqueue);
+-      priv->workqueue = NULL;
+       sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
+  out_uninit_drv:
+       iwl_uninit_drv(priv);
+@@ -3955,8 +3949,8 @@
+  out_iounmap:
+       pci_iounmap(pdev, priv->hw_base);
+  out_pci_release_regions:
+-      pci_set_drvdata(pdev, NULL);
+       pci_release_regions(pdev);
++      pci_set_drvdata(pdev, NULL);
+  out_pci_disable_device:
+       pci_disable_device(pdev);
+  out_ieee80211_free_hw:
+@@ -4044,19 +4038,6 @@
+               priv->is_open = 1;
+       }
+-      /* pci driver assumes state will be saved in this function.
+-       * pci state is saved and device disabled when interface is
+-       * stopped, so at this time pci device will always be disabled -
+-       * whether interface was started or not. saving pci state now will
+-       * cause saved state be that of a disabled device, which will cause
+-       * problems during resume in that we will end up with a disabled device.
+-       *
+-       * indicate that the current saved state (from when interface was
+-       * stopped) is valid. if interface was never up at time of suspend
+-       * then the saved state will still be valid as it was saved during
+-       * .probe. */
+-      pdev->state_saved = true;
+-
+       pci_set_power_state(pdev, PCI_D3hot);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-sta.c linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-sta.c
+--- linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-sta.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-sta.c       2009-05-10 23:48:29.000000000 +0200
+@@ -480,9 +480,6 @@
+       priv->num_stations = 0;
+       memset(priv->stations, 0, sizeof(priv->stations));
+-      /* clean ucode key table bit map */
+-      priv->ucode_key_table = 0;
+-
+       spin_unlock_irqrestore(&priv->sta_lock, flags);
+ }
+ EXPORT_SYMBOL(iwl_clear_stations_table);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-tx.c linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-tx.c
+--- linux-2.6.29.owrt/drivers/net/wireless/iwlwifi/iwl-tx.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/iwlwifi/iwl-tx.c        2009-05-10 23:48:29.000000000 +0200
+@@ -148,7 +148,7 @@
+               pci_unmap_single(dev,
+                               pci_unmap_addr(&txq->cmd[index]->meta, mapping),
+                               pci_unmap_len(&txq->cmd[index]->meta, len),
+-                              PCI_DMA_BIDIRECTIONAL);
++                              PCI_DMA_TODEVICE);
+       /* Unmap chunks, if any. */
+       for (i = 1; i < num_tbs; i++) {
+@@ -964,7 +964,7 @@
+        * within command buffer array. */
+       txcmd_phys = pci_map_single(priv->pci_dev,
+                                   out_cmd, sizeof(struct iwl_cmd),
+-                                  PCI_DMA_BIDIRECTIONAL);
++                                  PCI_DMA_TODEVICE);
+       pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
+       pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
+       /* Add buffer containing Tx command and MAC(!) header to TFD's
+@@ -1115,7 +1115,7 @@
+                       IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
+       phys_addr = pci_map_single(priv->pci_dev, out_cmd,
+-                                 len, PCI_DMA_BIDIRECTIONAL);
++                                 len, PCI_DMA_TODEVICE);
+       pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
+       pci_unmap_len_set(&out_cmd->meta, len, len);
+       phys_addr += offsetof(struct iwl_cmd, hdr);
+@@ -1212,7 +1212,7 @@
+       pci_unmap_single(priv->pci_dev,
+               pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
+               pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
+-              PCI_DMA_BIDIRECTIONAL);
++              PCI_DMA_TODEVICE);
+       for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
+            q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/ethtool.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/ethtool.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/ethtool.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/ethtool.c      2009-05-10 23:48:29.000000000 +0200
+@@ -23,7 +23,7 @@
+ static void lbs_ethtool_get_drvinfo(struct net_device *dev,
+                                        struct ethtool_drvinfo *info)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       snprintf(info->fw_version, 32, "%u.%u.%u.p%u",
+               priv->fwrelease >> 24 & 0xff,
+@@ -47,7 +47,7 @@
+ static int lbs_ethtool_get_eeprom(struct net_device *dev,
+                                   struct ethtool_eeprom *eeprom, u8 * bytes)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct cmd_ds_802_11_eeprom_access cmd;
+       int ret;
+@@ -76,7 +76,7 @@
+ static void lbs_ethtool_get_stats(struct net_device *dev,
+                                 struct ethtool_stats *stats, uint64_t *data)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct cmd_ds_mesh_access mesh_access;
+       int ret;
+@@ -113,7 +113,7 @@
+ static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
+               return MESH_STATS_NUM;
+@@ -143,7 +143,7 @@
+ static void lbs_ethtool_get_wol(struct net_device *dev,
+                               struct ethtool_wolinfo *wol)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       if (priv->wol_criteria == 0xffffffff) {
+               /* Interface driver didn't configure wake */
+@@ -166,7 +166,7 @@
+ static int lbs_ethtool_set_wol(struct net_device *dev,
+                              struct ethtool_wolinfo *wol)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       uint32_t criteria = 0;
+       if (priv->wol_criteria == 0xffffffff && wol->wolopts)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/if_usb.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/if_usb.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/if_usb.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/if_usb.c       2009-05-10 23:48:29.000000000 +0200
+@@ -59,7 +59,7 @@
+ static ssize_t if_usb_firmware_set(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct if_usb_card *cardp = priv->card;
+       char fwname[FIRMWARE_NAME_MAX];
+       int ret;
+@@ -86,7 +86,7 @@
+ static ssize_t if_usb_boot2_set(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct if_usb_card *cardp = priv->card;
+       char fwname[FIRMWARE_NAME_MAX];
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/main.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/main.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/main.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/main.c 2009-05-10 23:48:29.000000000 +0200
+@@ -222,7 +222,7 @@
+ static ssize_t lbs_anycast_get(struct device *dev,
+               struct device_attribute *attr, char * buf)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_access mesh_access;
+       int ret;
+@@ -241,7 +241,7 @@
+ static ssize_t lbs_anycast_set(struct device *dev,
+               struct device_attribute *attr, const char * buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_access mesh_access;
+       uint32_t datum;
+       int ret;
+@@ -263,7 +263,7 @@
+ static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
+               struct device_attribute *attr, char *buf)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_access mesh_access;
+       int ret;
+       u32 retry_limit;
+@@ -286,7 +286,7 @@
+ static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_access mesh_access;
+       int ret;
+       unsigned long retry_limit;
+@@ -321,7 +321,7 @@
+ static ssize_t lbs_rtap_get(struct device *dev,
+               struct device_attribute *attr, char * buf)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       return snprintf(buf, 5, "0x%X\n", priv->monitormode);
+ }
+@@ -332,7 +332,7 @@
+               struct device_attribute *attr, const char * buf, size_t count)
+ {
+       int monitor_mode;
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       sscanf(buf, "%x", &monitor_mode);
+       if (monitor_mode) {
+@@ -383,7 +383,7 @@
+ static ssize_t lbs_mesh_get(struct device *dev,
+               struct device_attribute *attr, char * buf)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
+ }
+@@ -393,7 +393,7 @@
+ static ssize_t lbs_mesh_set(struct device *dev,
+               struct device_attribute *attr, const char * buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       int enable;
+       int ret, action = CMD_ACT_MESH_CONFIG_STOP;
+@@ -452,7 +452,7 @@
+  */
+ static int lbs_dev_open(struct net_device *dev)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev) ;
+       int ret = 0;
+       lbs_deb_enter(LBS_DEB_NET);
+@@ -521,7 +521,7 @@
+  */
+ static int lbs_eth_stop(struct net_device *dev)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_NET);
+@@ -538,7 +538,7 @@
+ static void lbs_tx_timeout(struct net_device *dev)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_TX);
+@@ -590,7 +590,7 @@
+  */
+ static struct net_device_stats *lbs_get_stats(struct net_device *dev)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_NET);
+       return &priv->stats;
+@@ -599,7 +599,7 @@
+ static int lbs_set_mac_address(struct net_device *dev, void *addr)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct sockaddr *phwaddr = addr;
+       struct cmd_ds_802_11_mac_address cmd;
+@@ -732,7 +732,7 @@
+ static void lbs_set_multicast_list(struct net_device *dev)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       schedule_work(&priv->mcast_work);
+ }
+@@ -748,7 +748,7 @@
+ static int lbs_thread(void *data)
+ {
+       struct net_device *dev = data;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       wait_queue_t wait;
+       lbs_deb_enter(LBS_DEB_THREAD);
+@@ -1184,7 +1184,6 @@
+               goto done;
+       }
+       priv = netdev_priv(dev);
+-      dev->ml_priv = priv;
+       if (lbs_init_adapter(priv)) {
+               lbs_pr_err("failed to initialize adapter structure.\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/persistcfg.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/persistcfg.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/persistcfg.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/persistcfg.c   2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,7 @@
+ static int mesh_get_default_parameters(struct device *dev,
+                                      struct mrvl_mesh_defaults *defs)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_config cmd;
+       int ret;
+@@ -57,7 +57,7 @@
+ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_config cmd;
+       uint32_t datum;
+       int ret;
+@@ -100,7 +100,7 @@
+ static ssize_t boottime_set(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_config cmd;
+       uint32_t datum;
+       int ret;
+@@ -152,7 +152,7 @@
+ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+ {
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       struct cmd_ds_mesh_config cmd;
+       uint32_t datum;
+       int ret;
+@@ -210,7 +210,7 @@
+       struct cmd_ds_mesh_config cmd;
+       struct mrvl_mesh_defaults defs;
+       struct mrvl_meshie *ie;
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       int len;
+       int ret;
+@@ -269,7 +269,7 @@
+       struct cmd_ds_mesh_config cmd;
+       struct mrvl_mesh_defaults defs;
+       struct mrvl_meshie *ie;
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       uint32_t datum;
+       int ret;
+@@ -323,7 +323,7 @@
+       struct cmd_ds_mesh_config cmd;
+       struct mrvl_mesh_defaults defs;
+       struct mrvl_meshie *ie;
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       uint32_t datum;
+       int ret;
+@@ -377,7 +377,7 @@
+       struct cmd_ds_mesh_config cmd;
+       struct mrvl_mesh_defaults defs;
+       struct mrvl_meshie *ie;
+-      struct lbs_private *priv = to_net_dev(dev)->ml_priv;
++      struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+       uint32_t datum;
+       int ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/scan.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/scan.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/scan.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/scan.c 2009-05-10 23:48:29.000000000 +0200
+@@ -945,7 +945,7 @@
+                union iwreq_data *wrqu, char *extra)
+ {
+       DECLARE_SSID_BUF(ssid);
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1008,7 +1008,7 @@
+                struct iw_point *dwrq, char *extra)
+ {
+ #define SCAN_ITEM_SIZE 128
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int err = 0;
+       char *ev = extra;
+       char *stop = ev + dwrq->length;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/tx.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/tx.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/tx.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/tx.c   2009-05-10 23:48:29.000000000 +0200
+@@ -60,7 +60,7 @@
+ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+       unsigned long flags;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct txpd *txpd;
+       char *p802x_hdr;
+       uint16_t pkt_len;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/libertas/wext.c linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/wext.c
+--- linux-2.6.29.owrt/drivers/net/wireless/libertas/wext.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/wext.c 2009-05-10 23:48:29.000000000 +0200
+@@ -163,7 +163,7 @@
+ static int lbs_get_freq(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_freq *fwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct chan_freq_power *cfp;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -189,7 +189,7 @@
+ static int lbs_get_wap(struct net_device *dev, struct iw_request_info *info,
+                       struct sockaddr *awrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -207,7 +207,7 @@
+ static int lbs_set_nick(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -231,7 +231,7 @@
+ static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -248,7 +248,7 @@
+ static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -273,7 +273,7 @@
+                       struct iw_param *vwrq, char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       u32 val = vwrq->value;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -293,7 +293,7 @@
+ static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info,
+                       struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u16 val = 0;
+@@ -315,7 +315,7 @@
+ static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u32 val = vwrq->value;
+@@ -336,7 +336,7 @@
+ static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info,
+                        struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u16 val = 0;
+@@ -359,7 +359,7 @@
+ static int lbs_get_mode(struct net_device *dev,
+                        struct iw_request_info *info, u32 * uwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -385,7 +385,7 @@
+                         struct iw_request_info *info,
+                         struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       s16 curlevel = 0;
+       int ret = 0;
+@@ -418,7 +418,7 @@
+ static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info,
+                         struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u16 slimit = 0, llimit = 0;
+@@ -466,7 +466,7 @@
+ static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info,
+                         struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u16 val = 0;
+@@ -542,7 +542,7 @@
+                         struct iw_point *dwrq, char *extra)
+ {
+       int i, j;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct iw_range *range = (struct iw_range *)extra;
+       struct chan_freq_power *cfp;
+       u8 rates[MAX_RATES + 1];
+@@ -708,7 +708,7 @@
+ static int lbs_set_power(struct net_device *dev, struct iw_request_info *info,
+                         struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -758,7 +758,7 @@
+ static int lbs_get_power(struct net_device *dev, struct iw_request_info *info,
+                         struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -781,7 +781,7 @@
+               EXCELLENT = 95,
+               PERFECT = 100
+       };
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       u32 rssi_qual;
+       u32 tx_qual;
+       u32 quality = 0;
+@@ -886,7 +886,7 @@
+                 struct iw_freq *fwrq, char *extra)
+ {
+       int ret = -EINVAL;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct chan_freq_power *cfp;
+       struct assoc_request * assoc_req;
+@@ -943,7 +943,7 @@
+                            struct iw_request_info *info,
+                            struct iw_freq *fwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct chan_freq_power *cfp;
+       int ret = -EINVAL;
+@@ -994,7 +994,7 @@
+ static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
+                 struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       u8 new_rate = 0;
+       int ret = -EINVAL;
+       u8 rates[MAX_RATES + 1];
+@@ -1054,7 +1054,7 @@
+ static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
+                 struct iw_param *vwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1079,7 +1079,7 @@
+                 struct iw_request_info *info, u32 * uwrq, char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct assoc_request * assoc_req;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1124,7 +1124,7 @@
+                          struct iw_request_info *info,
+                          struct iw_point *dwrq, u8 * extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1319,7 +1319,7 @@
+                   struct iw_point *dwrq, char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct assoc_request * assoc_req;
+       u16 is_default = 0, index = 0, set_tx_key = 0;
+@@ -1395,7 +1395,7 @@
+                             char *extra)
+ {
+       int ret = -EINVAL;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+       int index, max_key_len;
+@@ -1501,7 +1501,7 @@
+                             char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+       int alg = ext->alg;
+       struct assoc_request * assoc_req;
+@@ -1639,7 +1639,7 @@
+                         struct iw_point *dwrq,
+                         char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       struct assoc_request * assoc_req;
+@@ -1685,7 +1685,7 @@
+                         char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1713,7 +1713,7 @@
+                        struct iw_param *dwrq,
+                        char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct assoc_request * assoc_req;
+       int ret = 0;
+       int updated = 0;
+@@ -1816,7 +1816,7 @@
+                        char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1857,7 +1857,7 @@
+                  struct iw_param *vwrq, char *extra)
+ {
+       int ret = 0;
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       s16 dbm = (s16) vwrq->value;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1936,7 +1936,7 @@
+ static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info,
+                  struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -1971,7 +1971,7 @@
+ static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
+                  struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       u8 ssid[IW_ESSID_MAX_SIZE];
+       u8 ssid_len = 0;
+@@ -2040,7 +2040,7 @@
+                             struct iw_request_info *info,
+                             struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -2058,7 +2058,7 @@
+                             struct iw_request_info *info,
+                             struct iw_point *dwrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       int ret = 0;
+       lbs_deb_enter(LBS_DEB_WEXT);
+@@ -2102,7 +2102,7 @@
+ static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info,
+                struct sockaddr *awrq, char *extra)
+ {
+-      struct lbs_private *priv = dev->ml_priv;
++      struct lbs_private *priv = netdev_priv(dev);
+       struct assoc_request * assoc_req;
+       int ret = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/orinoco/orinoco.c linux-2.6.29-rc3.owrt/drivers/net/wireless/orinoco/orinoco.c
+--- linux-2.6.29.owrt/drivers/net/wireless/orinoco/orinoco.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/orinoco/orinoco.c       2009-05-10 23:48:29.000000000 +0200
+@@ -3157,20 +3157,8 @@
+       return NOTIFY_DONE;
+ }
+-
+-static void orinoco_register_pm_notifier(struct orinoco_private *priv)
+-{
+-      priv->pm_notifier.notifier_call = orinoco_pm_notifier;
+-      register_pm_notifier(&priv->pm_notifier);
+-}
+-
+-static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
+-{
+-      unregister_pm_notifier(&priv->pm_notifier);
+-}
+ #else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
+-#define orinoco_register_pm_notifier(priv) do { } while(0)
+-#define orinoco_unregister_pm_notifier(priv) do { } while(0)
++#define orinoco_pm_notifier NULL
+ #endif
+ /********************************************************************/
+@@ -3660,7 +3648,8 @@
+       priv->cached_fw = NULL;
+       /* Register PM notifiers */
+-      orinoco_register_pm_notifier(priv);
++      priv->pm_notifier.notifier_call = orinoco_pm_notifier;
++      register_pm_notifier(&priv->pm_notifier);
+       return dev;
+ }
+@@ -3684,7 +3673,7 @@
+               kfree(rx_data);
+       }
+-      orinoco_unregister_pm_notifier(priv);
++      unregister_pm_notifier(&priv->pm_notifier);
+       orinoco_uncache_fw(priv);
+       priv->wpa_ie_len = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/p54/p54common.c linux-2.6.29-rc3.owrt/drivers/net/wireless/p54/p54common.c
+--- linux-2.6.29.owrt/drivers/net/wireless/p54/p54common.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/p54/p54common.c 2009-05-10 23:48:29.000000000 +0200
+@@ -710,11 +710,10 @@
+                                          __le32 req_id)
+ {
+       struct p54_common *priv = dev->priv;
+-      struct sk_buff *entry;
++      struct sk_buff *entry = priv->tx_queue.next;
+       unsigned long flags;
+       spin_lock_irqsave(&priv->tx_queue.lock, flags);
+-      entry = priv->tx_queue.next;
+       while (entry != (struct sk_buff *)&priv->tx_queue) {
+               struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
+@@ -733,7 +732,7 @@
+       struct p54_common *priv = dev->priv;
+       struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+       struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
+-      struct sk_buff *entry;
++      struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+       u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
+       struct memrecord *range = NULL;
+       u32 freed = 0;
+@@ -742,7 +741,6 @@
+       int count, idx;
+       spin_lock_irqsave(&priv->tx_queue.lock, flags);
+-      entry = (struct sk_buff *) priv->tx_queue.next;
+       while (entry != (struct sk_buff *)&priv->tx_queue) {
+               struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
+               struct p54_hdr *entry_hdr;
+@@ -978,7 +976,7 @@
+                              struct p54_hdr *data, u32 len)
+ {
+       struct p54_common *priv = dev->priv;
+-      struct sk_buff *entry;
++      struct sk_buff *entry = priv->tx_queue.next;
+       struct sk_buff *target_skb = NULL;
+       struct ieee80211_tx_info *info;
+       struct memrecord *range;
+@@ -1016,7 +1014,6 @@
+               }
+       }
+-      entry = priv->tx_queue.next;
+       while (left--) {
+               u32 hole_size;
+               info = IEEE80211_SKB_CB(entry);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/rt2x00/rt2500usb.c linux-2.6.29-rc3.owrt/drivers/net/wireless/rt2x00/rt2500usb.c
+--- linux-2.6.29.owrt/drivers/net/wireless/rt2x00/rt2500usb.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/rt2x00/rt2500usb.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1952,8 +1952,6 @@
+       { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
+       { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
+       { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+-      /* CNet */
+-      { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* Conceptronic */
+       { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* D-LINK */
+@@ -1978,20 +1976,14 @@
+       { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
+       { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
+       { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+-      /* Sagem */
+-      { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* Siemens */
+       { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* SMC */
+       { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* Spairon */
+       { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+-      /* SURECOM */
+-      { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* Trust */
+       { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+-      /* VTech */
+-      { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
+       /* Zinwell */
+       { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
+       { 0, }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/rt2x00/rt73usb.c linux-2.6.29-rc3.owrt/drivers/net/wireless/rt2x00/rt73usb.c
+--- linux-2.6.29.owrt/drivers/net/wireless/rt2x00/rt73usb.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/rt2x00/rt73usb.c        2009-05-10 23:48:29.000000000 +0200
+@@ -2281,18 +2281,7 @@
+  */
+ static struct usb_device_id rt73usb_device_table[] = {
+       /* AboCom */
+-      { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* AL */
+-      { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* Amigo */
+-      { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* AMIT  */
+-      { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Askey */
+       { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* ASUS */
+@@ -2305,9 +2294,7 @@
+       { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Billionton */
+       { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Buffalo */
+-      { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* CNet */
+       { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
+@@ -2321,11 +2308,6 @@
+       { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* Edimax */
+-      { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* EnGenius */
+-      { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Gemtek */
+       { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Gigabyte */
+@@ -2346,34 +2328,22 @@
+       { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Ralink */
+-      { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Qcom */
+       { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* Samsung */
+-      { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Senao */
+       { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Sitecom */
+-      { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
+-      { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
++      { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Surecom */
+       { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* Philips */
+-      { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
+       /* Planex */
+       { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
+       { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* Zcom */
+-      { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+-      /* ZyXEL */
+-      { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
+       { 0, }
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/rtl818x/rtl8187_dev.c linux-2.6.29-rc3.owrt/drivers/net/wireless/rtl818x/rtl8187_dev.c
+--- linux-2.6.29.owrt/drivers/net/wireless/rtl818x/rtl8187_dev.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/rtl818x/rtl8187_dev.c   2009-05-10 23:48:29.000000000 +0200
+@@ -48,10 +48,6 @@
+       {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
+       {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
+       {USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+-      /* Surecom */
+-      {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+-      /* Logitech */
+-      {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
+       /* Netgear */
+       {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
+       {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+@@ -61,16 +57,8 @@
+       /* Sitecom */
+       {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
+       {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+-      /* Sphairon Access Systems GmbH */
+-      {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+-      /* Dick Smith Electronics */
+-      {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
+       /* Abocom */
+       {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+-      /* Qcom */
+-      {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+-      /* AirLive */
+-      {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+       {}
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c linux-2.6.29-rc3.owrt/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+--- linux-2.6.29.owrt/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c       2009-05-10 23:48:29.000000000 +0200
+@@ -285,10 +285,7 @@
+       ofdm_power = priv->channels[channel - 1].hw_value >> 4;
+       cck_power = min(cck_power, (u8)11);
+-      if (ofdm_power > (u8)15)
+-              ofdm_power = 25;
+-      else
+-              ofdm_power += 10;
++      ofdm_power = min(ofdm_power, (u8)35);
+       rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+                        rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+@@ -539,10 +536,7 @@
+       cck_power += priv->txpwr_base & 0xF;
+       cck_power = min(cck_power, (u8)35);
+-      if (ofdm_power > (u8)15)
+-              ofdm_power = 25;
+-      else
+-              ofdm_power += 10;
++      ofdm_power = min(ofdm_power, (u8)15);
+       ofdm_power += priv->txpwr_base >> 4;
+       ofdm_power = min(ofdm_power, (u8)35);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_mac.c linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_mac.c
+--- linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_mac.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_mac.c       2009-05-10 23:48:29.000000000 +0200
+@@ -575,17 +575,13 @@
+       r = fill_ctrlset(mac, skb);
+       if (r)
+-              goto fail;
++              return r;
+       info->rate_driver_data[0] = hw;
+       r = zd_usb_tx(&mac->chip.usb, skb);
+       if (r)
+-              goto fail;
+-      return 0;
+-
+-fail:
+-      dev_kfree_skb(skb);
++              return r;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_rf.c linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_rf.c
+--- linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_rf.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_rf.c        2009-05-10 23:48:29.000000000 +0200
+@@ -86,7 +86,6 @@
+       case AL7230B_RF:
+               r = zd_rf_init_al7230b(rf);
+               break;
+-      case MAXIM_NEW_RF:
+       case UW2453_RF:
+               r = zd_rf_init_uw2453(rf);
+               break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_usb.c linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_usb.c
+--- linux-2.6.29.owrt/drivers/net/wireless/zd1211rw/zd_usb.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/net/wireless/zd1211rw/zd_usb.c       2009-05-10 23:48:29.000000000 +0200
+@@ -37,7 +37,6 @@
+ static struct usb_device_id usb_ids[] = {
+       /* ZD1211 */
+       { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
+-      { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
+       { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
+       { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
+       { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parisc/dino.c linux-2.6.29-rc3.owrt/drivers/parisc/dino.c
+--- linux-2.6.29.owrt/drivers/parisc/dino.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parisc/dino.c        2009-05-10 23:48:29.000000000 +0200
+@@ -479,7 +479,7 @@
+       res = &dino_dev->hba.lmmio_space;
+       res->flags = IORESOURCE_MEM;
+       size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)", 
+-                       dev_name(bus->bridge));
++                       bus->bridge->bus_id);
+       res->name = kmalloc(size+1, GFP_KERNEL);
+       if(res->name)
+               strcpy((char *)res->name, name);
+@@ -493,7 +493,7 @@
+               struct list_head *ln, *tmp_ln;
+               printk(KERN_ERR "Dino: cannot attach bus %s\n",
+-                     dev_name(bus->bridge));
++                     bus->bridge->bus_id);
+               /* kill the bus, we can't do anything with it */
+               list_for_each_safe(ln, tmp_ln, &bus->devices) {
+                       struct pci_dev *dev = pci_dev_b(ln);
+@@ -587,7 +587,7 @@
+                       bus->resource[i+1] = &res[i];
+               }
+-      } else if (bus->parent) {
++      } else if(bus->self) {
+               int i;
+               pci_read_bridge_bases(bus);
+@@ -611,12 +611,12 @@
+                       }
+                                       
+                       DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
+-                          dev_name(&bus->self->dev), i,
++                          bus->self->dev.bus_id, i,
+                           bus->self->resource[i].start,
+                           bus->self->resource[i].end);
+                       pci_assign_resource(bus->self, i);
+                       DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
+-                          dev_name(&bus->self->dev), i,
++                          bus->self->dev.bus_id, i,
+                           bus->self->resource[i].start,
+                           bus->self->resource[i].end);
+               }
+@@ -1026,8 +1026,7 @@
+               dino_current_bus = bus->subordinate + 1;
+               pci_bus_assign_resources(bus);
+       } else {
+-              printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+-                     dev_name(&dev->dev), dino_current_bus);
++              printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus);
+               /* increment the bus number in case of duplicates */
+               dino_current_bus++;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parisc/gsc.c linux-2.6.29-rc3.owrt/drivers/parisc/gsc.c
+--- linux-2.6.29.owrt/drivers/parisc/gsc.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parisc/gsc.c 2009-05-10 23:48:29.000000000 +0200
+@@ -186,34 +186,29 @@
+       *irqp = irq;
+ }
+-struct gsc_fixup_struct {
+-      void (*choose_irq)(struct parisc_device *, void *);
+-      void *ctrl;
+-};
+-
+-static int gsc_fixup_irqs_callback(struct device *dev, void *data)
++static struct device *next_device(struct klist_iter *i)
+ {
+-      struct parisc_device *padev = to_parisc_device(dev);
+-      struct gsc_fixup_struct *gf = data;
+-
+-      /* work-around for 715/64 and others which have parent
+-         at path [5] and children at path [5/0/x] */
+-      if (padev->id.hw_type == HPHW_FAULTY)
+-              gsc_fixup_irqs(padev, gf->ctrl, gf->choose_irq);
+-      gf->choose_irq(padev, gf->ctrl);
+-
+-      return 0;
++      struct klist_node * n = klist_next(i);
++      return n ? container_of(n, struct device, knode_parent) : NULL;
+ }
+ void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
+                       void (*choose_irq)(struct parisc_device *, void *))
+ {
+-      struct gsc_fixup_struct data = {
+-              .choose_irq     = choose_irq,
+-              .ctrl           = ctrl,
+-      };
++      struct device *dev;
++      struct klist_iter i;
+-      device_for_each_child(&parent->dev, &data, gsc_fixup_irqs_callback);
++      klist_iter_init(&parent->dev.klist_children, &i);
++      while ((dev = next_device(&i))) {
++              struct parisc_device *padev = to_parisc_device(dev);
++
++              /* work-around for 715/64 and others which have parent 
++                 at path [5] and children at path [5/0/x] */
++              if (padev->id.hw_type == HPHW_FAULTY)
++                      return gsc_fixup_irqs(padev, ctrl, choose_irq);
++              choose_irq(padev, ctrl);
++      }
++      klist_iter_exit(&i);
+ }
+ int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parisc/iosapic.c linux-2.6.29-rc3.owrt/drivers/parisc/iosapic.c
+--- linux-2.6.29.owrt/drivers/parisc/iosapic.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parisc/iosapic.c     2009-05-10 23:48:29.000000000 +0200
+@@ -487,7 +487,7 @@
+       }
+       /* Check if pcidev behind a PPB */
+-      if (pcidev->bus->parent) {
++      if (NULL != pcidev->bus->self) {
+               /* Convert pcidev INTR_PIN into something we
+               ** can lookup in the IRT.
+               */
+@@ -523,9 +523,10 @@
+ #endif /* PCI_BRIDGE_FUNCS */
+               /*
+-               * Locate the host slot of the PPB.
+-               */
+-              while (p->parent->parent)
++              ** Locate the host slot the PPB nearest the Host bus
++              ** adapter.
++              */
++              while (NULL != p->parent->self)
+                       p = p->parent;
+               intr_slot = PCI_SLOT(p->self->devfn);
+@@ -708,14 +709,11 @@
+       struct vector_info *vi = iosapic_get_vector(irq);
+       u32 d0, d1, dummy_d0;
+       unsigned long flags;
+-      int dest_cpu;
+-      dest_cpu = cpu_check_affinity(irq, dest);
+-      if (dest_cpu < 0)
++      if (cpu_check_affinity(irq, dest))
+               return;
+-      irq_desc[irq].affinity = cpumask_of_cpu(dest_cpu);
+-      vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
++      vi->txn_addr = txn_affinity_addr(irq, cpumask_first(dest));
+       spin_lock_irqsave(&iosapic_lock, flags);
+       /* d1 contains the destination CPU, so only want to set that
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parisc/lba_pci.c linux-2.6.29-rc3.owrt/drivers/parisc/lba_pci.c
+--- linux-2.6.29.owrt/drivers/parisc/lba_pci.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parisc/lba_pci.c     2009-05-10 23:48:29.000000000 +0200
+@@ -644,7 +644,7 @@
+       ** Properly Setup MMIO resources for this bus.
+       ** pci_alloc_primary_bus() mangles this.
+       */
+-      if (bus->parent) {
++      if (bus->self) {
+               int i;
+               /* PCI-PCI Bridge */
+               pci_read_bridge_bases(bus);
+@@ -802,7 +802,7 @@
+ ** Can't fixup here anyway....garr...
+ */
+       if (fbb_enable) {
+-              if (bus->parent) {
++              if (bus->self) {
+                       u8 control;
+                       /* enable on PPB */
+                       (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parisc/sba_iommu.c linux-2.6.29-rc3.owrt/drivers/parisc/sba_iommu.c
+--- linux-2.6.29.owrt/drivers/parisc/sba_iommu.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parisc/sba_iommu.c   2009-05-10 23:48:29.000000000 +0200
+@@ -668,7 +668,7 @@
+  * @dev: instance of PCI owned by the driver that's asking
+  * @mask:  number of address bits this PCI device can handle
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static int sba_dma_supported( struct device *dev, u64 mask)
+ {
+@@ -680,8 +680,8 @@
+               return(0);
+       }
+-      /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+-       * first, then fall back to 32-bit if that fails.
++      /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
++       * then fall back to 32-bit if that fails.
+        * We are just "encouraging" 32-bit DMA masks here since we can
+        * never allow IOMMU bypass unless we add special support for ZX1.
+        */
+@@ -706,7 +706,7 @@
+  * @size:  number of bytes to map in driver buffer.
+  * @direction:  R/W or both.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static dma_addr_t
+ sba_map_single(struct device *dev, void *addr, size_t size,
+@@ -785,7 +785,7 @@
+  * @size:  number of bytes mapped in driver buffer.
+  * @direction:  R/W or both.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static void
+ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
+@@ -861,7 +861,7 @@
+  * @size:  number of bytes mapped in driver buffer.
+  * @dma_handle:  IOVA of new buffer.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
+                                       dma_addr_t *dma_handle, gfp_t gfp)
+@@ -892,7 +892,7 @@
+  * @vaddr:  virtual address IOVA of "consistent" buffer.
+  * @dma_handler:  IO virtual address of "consistent" buffer.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static void
+ sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
+@@ -927,7 +927,7 @@
+  * @nents:  number of entries in list
+  * @direction:  R/W or both.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static int
+ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+@@ -1011,7 +1011,7 @@
+  * @nents:  number of entries in list
+  * @direction:  R/W or both.
+  *
+- * See Documentation/PCI/PCI-DMA-mapping.txt
++ * See Documentation/DMA-mapping.txt
+  */
+ static void 
+ sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
+@@ -1206,48 +1206,30 @@
+       return (void *) pdir_base;
+ }
+-struct ibase_data_struct {
+-      struct ioc *ioc;
+-      int ioc_num;
+-};
+-
+-static int setup_ibase_imask_callback(struct device *dev, void *data)
++static struct device *next_device(struct klist_iter *i)
+ {
+-      /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+-        extern void lba_set_iregs(struct parisc_device *, u32, u32);
+-      struct parisc_device *lba = to_parisc_device(dev);
+-      struct ibase_data_struct *ibd = data;
+-      int rope_num = (lba->hpa.start >> 13) & 0xf;
+-      if (rope_num >> 3 == ibd->ioc_num)
+-              lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
+-      return 0;
++        struct klist_node * n = klist_next(i);
++        return n ? container_of(n, struct device, knode_parent) : NULL;
+ }
+ /* setup Mercury or Elroy IBASE/IMASK registers. */
+ static void 
+ setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+ {
+-      struct ibase_data_struct ibase_data = {
+-              .ioc            = ioc,
+-              .ioc_num        = ioc_num,
+-      };
+-
+-      device_for_each_child(&sba->dev, &ibase_data,
+-                            setup_ibase_imask_callback);
+-}
+-
+-#ifdef SBA_AGP_SUPPORT
+-static int
+-sba_ioc_find_quicksilver(struct device *dev, void *data)
+-{
+-      int *agp_found = data;
+-      struct parisc_device *lba = to_parisc_device(dev);
++      /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
++        extern void lba_set_iregs(struct parisc_device *, u32, u32);
++      struct device *dev;
++      struct klist_iter i;
+-      if (IS_QUICKSILVER(lba))
+-              *agp_found = 1;
+-      return 0;
++      klist_iter_init(&sba->dev.klist_children, &i);
++      while ((dev = next_device(&i))) {
++              struct parisc_device *lba = to_parisc_device(dev);
++              int rope_num = (lba->hpa.start >> 13) & 0xf;
++              if (rope_num >> 3 == ioc_num)
++                      lba_set_iregs(lba, ioc->ibase, ioc->imask);
++      }
++      klist_iter_exit(&i);
+ }
+-#endif
+ static void
+ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+@@ -1350,6 +1332,9 @@
+       WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
+ #ifdef SBA_AGP_SUPPORT
++{
++      struct klist_iter i;
++      struct device *dev = NULL;
+       /*
+       ** If an AGP device is present, only use half of the IOV space
+@@ -1359,7 +1344,13 @@
+       ** We program the next pdir index after we stop w/ a key for
+       ** the GART code to handshake on.
+       */
+-      device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
++      klist_iter_init(&sba->dev.klist_children, &i);
++      while ((dev = next_device(&i))) {
++              struct parisc_device *lba = to_parisc_device(dev);
++              if (IS_QUICKSILVER(lba))
++                      agp_found = 1;
++      }
++      klist_iter_exit(&i);
+       if (agp_found && sba_reserve_agpgart) {
+               printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
+@@ -1367,7 +1358,9 @@
+               ioc->pdir_size /= 2;
+               ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
+       }
++}
+ #endif /*SBA_AGP_SUPPORT*/
++
+ }
+ static void
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parport/parport_atari.c linux-2.6.29-rc3.owrt/drivers/parport/parport_atari.c
+--- linux-2.6.29.owrt/drivers/parport/parport_atari.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parport/parport_atari.c      2009-05-10 23:48:29.000000000 +0200
+@@ -84,7 +84,7 @@
+ static unsigned char
+ parport_atari_read_status(struct parport *p)
+ {
+-      return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
++      return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+               PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
+ }
+@@ -193,9 +193,9 @@
+               sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
+               local_irq_restore(flags);
+               /* MFP port I0 as input. */
+-              st_mfp.data_dir &= ~1;
++              mfp.data_dir &= ~1;
+               /* MFP port I0 interrupt on high->low edge. */
+-              st_mfp.active_edge &= ~1;
++              mfp.active_edge &= ~1;
+               p = parport_register_port((unsigned long)&sound_ym.wd_data,
+                                         IRQ_MFP_BUSY, PARPORT_DMA_NONE,
+                                         &parport_atari_ops);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/parport/parport_serial.c linux-2.6.29-rc3.owrt/drivers/parport/parport_serial.c
+--- linux-2.6.29.owrt/drivers/parport/parport_serial.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/parport/parport_serial.c     2009-05-10 23:48:29.000000000 +0200
+@@ -64,11 +64,6 @@
+ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma)
+ {
+-      /* the rule described below doesn't hold for this device */
+-      if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
+-                      dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+-                      dev->subsystem_device == 0x0299)
+-              return -ENODEV;
+       /*
+        * Netmos uses the subdevice ID to indicate the number of parallel
+        * and serial ports.  The form is 0x00PS, where <P> is the number of
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/dmar.c linux-2.6.29-rc3.owrt/drivers/pci/dmar.c
+--- linux-2.6.29.owrt/drivers/pci/dmar.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/dmar.c   2009-05-10 23:48:29.000000000 +0200
+@@ -330,14 +330,6 @@
+       entry_header = (struct acpi_dmar_header *)(dmar + 1);
+       while (((unsigned long)entry_header) <
+                       (((unsigned long)dmar) + dmar_tbl->length)) {
+-              /* Avoid looping forever on bad ACPI tables */
+-              if (entry_header->length == 0) {
+-                      printk(KERN_WARNING PREFIX
+-                              "Invalid 0-length structure\n");
+-                      ret = -EINVAL;
+-                      break;
+-              }
+-
+               dmar_table_print_dmar_entry(entry_header);
+               switch (entry_header->type) {
+@@ -499,7 +491,7 @@
+       int map_size;
+       u32 ver;
+       static int iommu_allocated = 0;
+-      int agaw = 0;
++      int agaw;
+       iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
+       if (!iommu)
+@@ -515,7 +507,6 @@
+       iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
+       iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+-#ifdef CONFIG_DMAR
+       agaw = iommu_calculate_agaw(iommu);
+       if (agaw < 0) {
+               printk(KERN_ERR
+@@ -523,7 +514,6 @@
+                       iommu->seq_id);
+               goto error;
+       }
+-#endif
+       iommu->agaw = agaw;
+       /* the registers might be more than one page */
+@@ -581,49 +571,19 @@
+       }
+ }
+-static int qi_check_fault(struct intel_iommu *iommu, int index)
+-{
+-      u32 fault;
+-      int head;
+-      struct q_inval *qi = iommu->qi;
+-      int wait_index = (index + 1) % QI_LENGTH;
+-
+-      fault = readl(iommu->reg + DMAR_FSTS_REG);
+-
+-      /*
+-       * If IQE happens, the head points to the descriptor associated
+-       * with the error. No new descriptors are fetched until the IQE
+-       * is cleared.
+-       */
+-      if (fault & DMA_FSTS_IQE) {
+-              head = readl(iommu->reg + DMAR_IQH_REG);
+-              if ((head >> 4) == index) {
+-                      memcpy(&qi->desc[index], &qi->desc[wait_index],
+-                                      sizeof(struct qi_desc));
+-                      __iommu_flush_cache(iommu, &qi->desc[index],
+-                                      sizeof(struct qi_desc));
+-                      writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG);
+-                      return -EINVAL;
+-              }
+-      }
+-
+-      return 0;
+-}
+-
+ /*
+  * Submit the queued invalidation descriptor to the remapping
+  * hardware unit and wait for its completion.
+  */
+-int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
++void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+ {
+-      int rc = 0;
+       struct q_inval *qi = iommu->qi;
+       struct qi_desc *hw, wait_desc;
+       int wait_index, index;
+       unsigned long flags;
+       if (!qi)
+-              return 0;
++              return;
+       hw = qi->desc;
+@@ -641,8 +601,7 @@
+       hw[index] = *desc;
+-      wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) |
+-                      QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
++      wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+       wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
+       hw[wait_index] = wait_desc;
+@@ -653,11 +612,13 @@
+       qi->free_head = (qi->free_head + 2) % QI_LENGTH;
+       qi->free_cnt -= 2;
++      spin_lock(&iommu->register_lock);
+       /*
+        * update the HW tail register indicating the presence of
+        * new descriptors.
+        */
+       writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
++      spin_unlock(&iommu->register_lock);
+       while (qi->desc_status[wait_index] != QI_DONE) {
+               /*
+@@ -667,21 +628,15 @@
+                * a deadlock where the interrupt context can wait indefinitely
+                * for free slots in the queue.
+                */
+-              rc = qi_check_fault(iommu, index);
+-              if (rc)
+-                      goto out;
+-
+               spin_unlock(&qi->q_lock);
+               cpu_relax();
+               spin_lock(&qi->q_lock);
+       }
+-out:
+-      qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
++
++      qi->desc_status[index] = QI_DONE;
+       reclaim_free_desc(qi);
+       spin_unlock_irqrestore(&qi->q_lock, flags);
+-
+-      return rc;
+ }
+ /*
+@@ -694,13 +649,13 @@
+       desc.low = QI_IEC_TYPE;
+       desc.high = 0;
+-      /* should never fail */
+       qi_submit_sync(&desc, iommu);
+ }
+ int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
+                    u64 type, int non_present_entry_flush)
+ {
++
+       struct qi_desc desc;
+       if (non_present_entry_flush) {
+@@ -714,7 +669,10 @@
+                       | QI_CC_GRAN(type) | QI_CC_TYPE;
+       desc.high = 0;
+-      return qi_submit_sync(&desc, iommu);
++      qi_submit_sync(&desc, iommu);
++
++      return 0;
++
+ }
+ int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+@@ -744,7 +702,10 @@
+       desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
+               | QI_IOTLB_AM(size_order);
+-      return qi_submit_sync(&desc, iommu);
++      qi_submit_sync(&desc, iommu);
++
++      return 0;
++
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/fakephp.c linux-2.6.29-rc3.owrt/drivers/pci/hotplug/fakephp.c
+--- linux-2.6.29.owrt/drivers/pci/hotplug/fakephp.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/fakephp.c        2009-05-10 23:48:29.000000000 +0200
+@@ -195,13 +195,13 @@
+  * Tries hard not to re-enable already existing devices;
+  * also handles scanning of subfunctions.
+  */
+-static int pci_rescan_slot(struct pci_dev *temp)
++static void pci_rescan_slot(struct pci_dev *temp)
+ {
+       struct pci_bus *bus = temp->bus;
+       struct pci_dev *dev;
+       int func;
++      int retval;
+       u8 hdr_type;
+-      int count = 0;
+       if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
+               temp->hdr_type = hdr_type & 0x7f;
+@@ -213,12 +213,17 @@
+                               dbg("New device on %s function %x:%x\n",
+                                       bus->name, temp->devfn >> 3,
+                                       temp->devfn & 7);
+-                              count++;
++                              retval = pci_bus_add_device(dev);
++                              if (retval)
++                                      dev_err(&dev->dev, "error adding "
++                                              "device, continuing.\n");
++                              else
++                                      add_slot(dev);
+                       }
+               }
+               /* multifunction device? */
+               if (!(hdr_type & 0x80))
+-                      return count;
++                      return;
+               /* continue scanning for other functions */
+               for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) {
+@@ -234,13 +239,16 @@
+                                       dbg("New device on %s function %x:%x\n",
+                                               bus->name, temp->devfn >> 3,
+                                               temp->devfn & 7);
+-                                      count++;
++                                      retval = pci_bus_add_device(dev);
++                                      if (retval)
++                                              dev_err(&dev->dev, "error adding "
++                                                      "device, continuing.\n");
++                                      else
++                                              add_slot(dev);
+                               }
+                       }
+               }
+       }
+-
+-      return count;
+ }
+@@ -254,8 +262,6 @@
+ {
+       unsigned int devfn;
+       struct pci_dev *dev;
+-      int retval;
+-      int found = 0;
+       dev = alloc_pci_dev();
+       if (!dev)
+               return;
+@@ -264,23 +270,7 @@
+       dev->sysdata = bus->sysdata;
+       for (devfn = 0; devfn < 0x100; devfn += 8) {
+               dev->devfn = devfn;
+-              found += pci_rescan_slot(dev);
+-      }
+-
+-      if (found) {
+-              pci_bus_assign_resources(bus);
+-              list_for_each_entry(dev, &bus->devices, bus_list) {
+-                      /* Skip already-added devices */
+-                      if (dev->is_added)
+-                                      continue;
+-                      retval = pci_bus_add_device(dev);
+-                      if (retval)
+-                              dev_err(&dev->dev,
+-                                      "Error adding device, continuing\n");
+-                      else
+-                              add_slot(dev);
+-              }
+-              pci_bus_add_devices(bus);
++              pci_rescan_slot(dev);
+       }
+       kfree(dev);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/Kconfig linux-2.6.29-rc3.owrt/drivers/pci/hotplug/Kconfig
+--- linux-2.6.29.owrt/drivers/pci/hotplug/Kconfig      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/Kconfig  2009-05-10 23:48:29.000000000 +0200
+@@ -143,7 +143,7 @@
+ config HOTPLUG_PCI_RPA
+       tristate "RPA PCI Hotplug driver"
+-      depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
++      depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+       help
+         Say Y here if you have a RPA system that supports PCI Hotplug.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/Makefile linux-2.6.29-rc3.owrt/drivers/pci/hotplug/Makefile
+--- linux-2.6.29.owrt/drivers/pci/hotplug/Makefile     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/Makefile 2009-05-10 23:48:29.000000000 +0200
+@@ -5,15 +5,11 @@
+ obj-$(CONFIG_HOTPLUG_PCI)             += pci_hotplug.o
+ obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)      += cpqphp.o
+ obj-$(CONFIG_HOTPLUG_PCI_IBM)         += ibmphp.o
+-
+-# pciehp should be linked before acpiphp in order to allow the native driver
+-# to attempt to bind first. We can then fall back to generic support.
+-
+-obj-$(CONFIG_HOTPLUG_PCI_PCIE)                += pciehp.o
+ obj-$(CONFIG_HOTPLUG_PCI_ACPI)                += acpiphp.o
+ obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)    += acpiphp_ibm.o
+ obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o
+ obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC)        += cpcihp_generic.o
++obj-$(CONFIG_HOTPLUG_PCI_PCIE)                += pciehp.o
+ obj-$(CONFIG_HOTPLUG_PCI_SHPC)                += shpchp.o
+ obj-$(CONFIG_HOTPLUG_PCI_RPA)         += rpaphp.o
+ obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)   += rpadlpar_io.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/pciehp_core.c linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp_core.c
+--- linux-2.6.29.owrt/drivers/pci/hotplug/pciehp_core.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp_core.c    2009-05-10 23:48:29.000000000 +0200
+@@ -434,13 +434,6 @@
+               goto err_out_release_ctlr;
+       }
+-      /* Enable events after we have setup the data structures */
+-      rc = pcie_init_notification(ctrl);
+-      if (rc) {
+-              ctrl_err(ctrl, "Notification initialization failed\n");
+-              goto err_out_release_ctlr;
+-      }
+-
+       /* Check if slot is occupied */
+       t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+       t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/pciehp.h linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp.h
+--- linux-2.6.29.owrt/drivers/pci/hotplug/pciehp.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp.h 2009-05-10 23:48:29.000000000 +0200
+@@ -111,7 +111,6 @@
+       int cmd_busy;
+       unsigned int no_cmd_complete:1;
+       unsigned int link_active_reporting:1;
+-      unsigned int notification_enabled:1;
+ };
+ #define INT_BUTTON_IGNORE             0
+@@ -171,7 +170,6 @@
+ extern int pciehp_unconfigure_device(struct slot *p_slot);
+ extern void pciehp_queue_pushbutton_work(struct work_struct *work);
+ struct controller *pcie_init(struct pcie_device *dev);
+-int pcie_init_notification(struct controller *ctrl);
+ int pciehp_enable_slot(struct slot *p_slot);
+ int pciehp_disable_slot(struct slot *p_slot);
+ int pcie_enable_notification(struct controller *ctrl);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/hotplug/pciehp_hpc.c linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp_hpc.c
+--- linux-2.6.29.owrt/drivers/pci/hotplug/pciehp_hpc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/hotplug/pciehp_hpc.c     2009-05-10 23:48:29.000000000 +0200
+@@ -934,7 +934,7 @@
+               ctrl_warn(ctrl, "Cannot disable software notification\n");
+ }
+-int pcie_init_notification(struct controller *ctrl)
++static int pcie_init_notification(struct controller *ctrl)
+ {
+       if (pciehp_request_irq(ctrl))
+               return -1;
+@@ -942,17 +942,13 @@
+               pciehp_free_irq(ctrl);
+               return -1;
+       }
+-      ctrl->notification_enabled = 1;
+       return 0;
+ }
+ static void pcie_shutdown_notification(struct controller *ctrl)
+ {
+-      if (ctrl->notification_enabled) {
+-              pcie_disable_notification(ctrl);
+-              pciehp_free_irq(ctrl);
+-              ctrl->notification_enabled = 0;
+-      }
++      pcie_disable_notification(ctrl);
++      pciehp_free_irq(ctrl);
+ }
+ static int pcie_init_slot(struct controller *ctrl)
+@@ -1114,8 +1110,13 @@
+       if (pcie_init_slot(ctrl))
+               goto abort_ctrl;
++      if (pcie_init_notification(ctrl))
++              goto abort_slot;
++
+       return ctrl;
++abort_slot:
++      pcie_cleanup_slot(ctrl);
+ abort_ctrl:
+       kfree(ctrl);
+ abort:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/intel-iommu.c linux-2.6.29-rc3.owrt/drivers/pci/intel-iommu.c
+--- linux-2.6.29.owrt/drivers/pci/intel-iommu.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/intel-iommu.c    2009-05-10 23:48:29.000000000 +0200
+@@ -61,8 +61,6 @@
+ /* global iommu list, set NULL for ignored DMAR units */
+ static struct intel_iommu **g_iommus;
+-static int rwbf_quirk;
+-
+ /*
+  * 0: Present
+  * 1-11: Reserved
+@@ -270,12 +268,7 @@
+ static void domain_remove_dev_info(struct dmar_domain *domain);
+-#ifdef CONFIG_DMAR_DEFAULT_ON
+-int dmar_disabled = 0;
+-#else
+-int dmar_disabled = 1;
+-#endif /*CONFIG_DMAR_DEFAULT_ON*/
+-
++int dmar_disabled;
+ static int __initdata dmar_map_gfx = 1;
+ static int dmar_forcedac;
+ static int intel_iommu_strict;
+@@ -291,12 +284,9 @@
+       if (!str)
+               return -EINVAL;
+       while (*str) {
+-              if (!strncmp(str, "on", 2)) {
+-                      dmar_disabled = 0;
+-                      printk(KERN_INFO "Intel-IOMMU: enabled\n");
+-              } else if (!strncmp(str, "off", 3)) {
++              if (!strncmp(str, "off", 3)) {
+                       dmar_disabled = 1;
+-                      printk(KERN_INFO "Intel-IOMMU: disabled\n");
++                      printk(KERN_INFO"Intel-IOMMU: disabled\n");
+               } else if (!strncmp(str, "igfx_off", 8)) {
+                       dmar_map_gfx = 0;
+                       printk(KERN_INFO
+@@ -787,7 +777,7 @@
+       u32 val;
+       unsigned long flag;
+-      if (!rwbf_quirk && !cap_rwbf(iommu->cap))
++      if (!cap_rwbf(iommu->cap))
+               return;
+       val = iommu->gcmd | DMA_GCMD_WBF;
+@@ -3139,15 +3129,3 @@
+       .unmap          = intel_iommu_unmap_range,
+       .iova_to_phys   = intel_iommu_iova_to_phys,
+ };
+-
+-static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
+-{
+-      /*
+-       * Mobile 4 Series Chipset neglects to set RWBF capability,
+-       * but needs it:
+-       */
+-      printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
+-      rwbf_quirk = 1;
+-}
+-
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/intr_remapping.c linux-2.6.29-rc3.owrt/drivers/pci/intr_remapping.c
+--- linux-2.6.29.owrt/drivers/pci/intr_remapping.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/intr_remapping.c 2009-05-10 23:48:29.000000000 +0200
+@@ -207,7 +207,7 @@
+       return index;
+ }
+-static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
++static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+ {
+       struct qi_desc desc;
+@@ -215,7 +215,7 @@
+                  | QI_IEC_SELECTIVE;
+       desc.high = 0;
+-      return qi_submit_sync(&desc, iommu);
++      qi_submit_sync(&desc, iommu);
+ }
+ int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+@@ -283,7 +283,6 @@
+ int modify_irte(int irq, struct irte *irte_modified)
+ {
+-      int rc;
+       int index;
+       struct irte *irte;
+       struct intel_iommu *iommu;
+@@ -304,15 +303,14 @@
+       set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
+       __iommu_flush_cache(iommu, irte, sizeof(*irte));
+-      rc = qi_flush_iec(iommu, index, 0);
+-      spin_unlock(&irq_2_ir_lock);
++      qi_flush_iec(iommu, index, 0);
+-      return rc;
++      spin_unlock(&irq_2_ir_lock);
++      return 0;
+ }
+ int flush_irte(int irq)
+ {
+-      int rc;
+       int index;
+       struct intel_iommu *iommu;
+       struct irq_2_iommu *irq_iommu;
+@@ -328,10 +326,10 @@
+       index = irq_iommu->irte_index + irq_iommu->sub_handle;
+-      rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
++      qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+       spin_unlock(&irq_2_ir_lock);
+-      return rc;
++      return 0;
+ }
+ struct intel_iommu *map_ioapic_to_ir(int apic)
+@@ -357,7 +355,6 @@
+ int free_irte(int irq)
+ {
+-      int rc = 0;
+       int index, i;
+       struct irte *irte;
+       struct intel_iommu *iommu;
+@@ -378,7 +375,7 @@
+       if (!irq_iommu->sub_handle) {
+               for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
+                       set_64bit((unsigned long *)irte, 0);
+-              rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
++              qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+       }
+       irq_iommu->iommu = NULL;
+@@ -388,7 +385,7 @@
+       spin_unlock(&irq_2_ir_lock);
+-      return rc;
++      return 0;
+ }
+ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/msi.c linux-2.6.29-rc3.owrt/drivers/pci/msi.c
+--- linux-2.6.29.owrt/drivers/pci/msi.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/msi.c    2009-05-10 23:48:29.000000000 +0200
+@@ -103,14 +103,6 @@
+       }
+ }
+-static inline __attribute_const__ u32 msi_mask(unsigned x)
+-{
+-      /* Don't shift by >= width of type */
+-      if (x >= 5)
+-              return 0xffffffff;
+-      return (1 << (1 << x)) - 1;
+-}
+-
+ static void msix_flush_writes(struct irq_desc *desc)
+ {
+       struct msi_desc *entry;
+@@ -415,7 +407,8 @@
+               /* All MSIs are unmasked by default, Mask them all */
+               pci_read_config_dword(dev, base, &maskbits);
+-              temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1);
++              temp = (1 << multi_msi_capable(control));
++              temp = ((temp - 1) & ~temp);
+               maskbits |= temp;
+               pci_write_config_dword(dev, base, maskbits);
+               entry->msi_attrib.maskbits_mask = temp;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pci.c linux-2.6.29-rc3.owrt/drivers/pci/pci.c
+--- linux-2.6.29.owrt/drivers/pci/pci.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pci.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1393,35 +1393,35 @@
+       pci_power_t prev_state;
+       int error;
++      pci_restore_state(dev);
+       pci_update_current_state(dev, PCI_D0);
+       prev_state = dev->current_state;
+       if (prev_state == PCI_D0)
+-              goto Restore;
++              return 0;
+       error = pci_raw_set_power_state(dev, PCI_D0, false);
+       if (error)
+               return error;
+-      /*
+-       * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
+-       * we've made this assumption forever and it appears to be universally
+-       * satisfied.
+-       */
+-      switch(prev_state) {
+-      case PCI_D3cold:
+-      case PCI_D3hot:
+-              mdelay(pci_pm_d3_delay);
+-              break;
+-      case PCI_D2:
+-              udelay(PCI_PM_D2_DELAY);
+-              break;
++      if (pci_is_bridge(dev)) {
++              if (prev_state > PCI_D1)
++                      mdelay(PCI_PM_BUS_WAIT);
++      } else {
++              switch(prev_state) {
++              case PCI_D3cold:
++              case PCI_D3hot:
++                      mdelay(pci_pm_d3_delay);
++                      break;
++              case PCI_D2:
++                      udelay(PCI_PM_D2_DELAY);
++                      break;
++              }
+       }
+-      pci_update_current_state(dev, PCI_D0);
++      dev->current_state = PCI_D0;
+- Restore:
+-      return dev->state_saved ? pci_restore_state(dev) : 0;
++      return 0;
+ }
+ /**
+@@ -1540,21 +1540,16 @@
+ }
+ /**
+- *    __pci_request_region - Reserved PCI I/O and memory resource
++ *    pci_request_region - Reserved PCI I/O and memory resource
+  *    @pdev: PCI device whose resources are to be reserved
+  *    @bar: BAR to be reserved
+  *    @res_name: Name to be associated with resource.
+- *    @exclusive: whether the region access is exclusive or not
+  *
+  *    Mark the PCI region associated with PCI device @pdev BR @bar as
+  *    being reserved by owner @res_name.  Do not access any
+  *    address inside the PCI regions unless this call returns
+  *    successfully.
+  *
+- *    If @exclusive is set, then the region is marked so that userspace
+- *    is explicitly not allowed to map the resource via /dev/mem or
+- *    sysfs MMIO access.
+- *
+  *    Returns 0 on success, or %EBUSY on error.  A warning
+  *    message is also printed on failure.
+  */
+@@ -1593,12 +1588,12 @@
+ }
+ /**
+- *    pci_request_region - Reserve PCI I/O and memory resource
++ *    pci_request_region - Reserved PCI I/O and memory resource
+  *    @pdev: PCI device whose resources are to be reserved
+  *    @bar: BAR to be reserved
+- *    @res_name: Name to be associated with resource
++ *    @res_name: Name to be associated with resource.
+  *
+- *    Mark the PCI region associated with PCI device @pdev BAR @bar as
++ *    Mark the PCI region associated with PCI device @pdev BR @bar as
+  *    being reserved by owner @res_name.  Do not access any
+  *    address inside the PCI regions unless this call returns
+  *    successfully.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pci-driver.c linux-2.6.29-rc3.owrt/drivers/pci/pci-driver.c
+--- linux-2.6.29.owrt/drivers/pci/pci-driver.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pci-driver.c     2009-05-10 23:48:29.000000000 +0200
+@@ -355,8 +355,6 @@
+       int i = 0;
+       if (drv && drv->suspend) {
+-              pci_power_t prev = pci_dev->current_state;
+-
+               pci_dev->state_saved = false;
+               i = drv->suspend(pci_dev, state);
+@@ -367,13 +365,8 @@
+               if (pci_dev->state_saved)
+                       goto Fixup;
+-              if (pci_dev->current_state != PCI_D0
+-                  && pci_dev->current_state != PCI_UNKNOWN) {
+-                      WARN_ONCE(pci_dev->current_state != prev,
+-                              "PCI PM: Device state not saved by %pF\n",
+-                              drv->suspend);
++              if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+                       goto Fixup;
+-              }
+       }
+       pci_save_state(pci_dev);
+@@ -426,24 +419,38 @@
+ static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
+ {
+       pci_restore_standard_config(pci_dev);
+-      pci_dev->state_saved = false;
+       pci_fixup_device(pci_fixup_resume_early, pci_dev);
+ }
+-static void pci_pm_default_resume(struct pci_dev *pci_dev)
++static int pci_pm_default_resume(struct pci_dev *pci_dev)
+ {
+       pci_fixup_device(pci_fixup_resume, pci_dev);
+       if (!pci_is_bridge(pci_dev))
+               pci_enable_wake(pci_dev, PCI_D0, false);
++
++      return pci_pm_reenable_device(pci_dev);
++}
++
++static void pci_pm_default_suspend_generic(struct pci_dev *pci_dev)
++{
++      /* If device is enabled at this point, disable it */
++      pci_disable_enabled_device(pci_dev);
++      /*
++       * Save state with interrupts enabled, because in principle the bus the
++       * device is on may be put into a low power state after this code runs.
++       */
++      pci_save_state(pci_dev);
+ }
+ static void pci_pm_default_suspend(struct pci_dev *pci_dev)
+ {
+-      /* Disable non-bridge devices without PM support */
++      pci_pm_default_suspend_generic(pci_dev);
++
+       if (!pci_is_bridge(pci_dev))
+-              pci_disable_enabled_device(pci_dev);
+-      pci_save_state(pci_dev);
++              pci_prepare_to_sleep(pci_dev);
++
++      pci_fixup_device(pci_fixup_suspend, pci_dev);
+ }
+ static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev)
+@@ -488,49 +495,21 @@
+ static int pci_pm_suspend(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
++      int error = 0;
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_suspend(dev, PMSG_SUSPEND);
+-      if (!pm) {
+-              pci_pm_default_suspend(pci_dev);
+-              goto Fixup;
+-      }
+-
+-      pci_dev->state_saved = false;
+-
+-      if (pm->suspend) {
+-              pci_power_t prev = pci_dev->current_state;
+-              int error;
+-
+-              error = pm->suspend(dev);
+-              suspend_report_result(pm->suspend, error);
+-              if (error)
+-                      return error;
+-
+-              if (pci_dev->state_saved)
+-                      goto Fixup;
+-
+-              if (pci_dev->current_state != PCI_D0
+-                  && pci_dev->current_state != PCI_UNKNOWN) {
+-                      WARN_ONCE(pci_dev->current_state != prev,
+-                              "PCI PM: State of device not saved by %pF\n",
+-                              pm->suspend);
+-                      goto Fixup;
+-              }
+-      }
+-
+-      if (!pci_dev->state_saved) {
+-              pci_save_state(pci_dev);
+-              if (!pci_is_bridge(pci_dev))
+-                      pci_prepare_to_sleep(pci_dev);
++      if (drv && drv->pm && drv->pm->suspend) {
++              error = drv->pm->suspend(dev);
++              suspend_report_result(drv->pm->suspend, error);
+       }
+- Fixup:
+-      pci_fixup_device(pci_fixup_suspend, pci_dev);
++      if (!error)
++              pci_pm_default_suspend(pci_dev);
+-      return 0;
++      return error;
+ }
+ static int pci_pm_suspend_noirq(struct device *dev)
+@@ -573,29 +552,18 @@
+ static int pci_pm_resume(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
+       int error = 0;
+-      /*
+-       * This is necessary for the suspend error path in which resume is
+-       * called without restoring the standard config registers of the device.
+-       */
+-      if (pci_dev->state_saved)
+-              pci_restore_standard_config(pci_dev);
+-
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_resume(dev);
+-      pci_pm_default_resume(pci_dev);
++      error = pci_pm_default_resume(pci_dev);
+-      if (pm) {
+-              if (pm->resume)
+-                      error = pm->resume(dev);
+-      } else {
+-              pci_pm_reenable_device(pci_dev);
+-      }
++      if (!error && drv && drv->pm && drv->pm->resume)
++              error = drv->pm->resume(dev);
+-      return 0;
++      return error;
+ }
+ #else /* !CONFIG_SUSPEND */
+@@ -612,31 +580,21 @@
+ static int pci_pm_freeze(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
++      int error = 0;
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_suspend(dev, PMSG_FREEZE);
+-      if (!pm) {
+-              pci_pm_default_suspend(pci_dev);
+-              return 0;
++      if (drv && drv->pm && drv->pm->freeze) {
++              error = drv->pm->freeze(dev);
++              suspend_report_result(drv->pm->freeze, error);
+       }
+-      pci_dev->state_saved = false;
+-
+-      if (pm->freeze) {
+-              int error;
+-
+-              error = pm->freeze(dev);
+-              suspend_report_result(pm->freeze, error);
+-              if (error)
+-                      return error;
+-      }
+-
+-      if (!pci_dev->state_saved)
+-              pci_save_state(pci_dev);
++      if (!error)
++              pci_pm_default_suspend_generic(pci_dev);
+-      return 0;
++      return error;
+ }
+ static int pci_pm_freeze_noirq(struct device *dev)
+@@ -679,18 +637,16 @@
+ static int pci_pm_thaw(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
+       int error = 0;
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_resume(dev);
+-      if (pm) {
+-              if (pm->thaw)
+-                      error = pm->thaw(dev);
+-      } else {
+-              pci_pm_reenable_device(pci_dev);
+-      }
++      pci_pm_reenable_device(pci_dev);
++
++      if (drv && drv->pm && drv->pm->thaw)
++              error =  drv->pm->thaw(dev);
+       return error;
+ }
+@@ -698,29 +654,19 @@
+ static int pci_pm_poweroff(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
+       int error = 0;
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_suspend(dev, PMSG_HIBERNATE);
+-      if (!pm) {
+-              pci_pm_default_suspend(pci_dev);
+-              goto Fixup;
++      if (drv && drv->pm && drv->pm->poweroff) {
++              error = drv->pm->poweroff(dev);
++              suspend_report_result(drv->pm->poweroff, error);
+       }
+-      pci_dev->state_saved = false;
+-
+-      if (pm->poweroff) {
+-              error = pm->poweroff(dev);
+-              suspend_report_result(pm->poweroff, error);
+-      }
+-
+-      if (!pci_dev->state_saved && !pci_is_bridge(pci_dev))
+-              pci_prepare_to_sleep(pci_dev);
+-
+- Fixup:
+-      pci_fixup_device(pci_fixup_suspend, pci_dev);
++      if (!error)
++              pci_pm_default_suspend(pci_dev);
+       return error;
+ }
+@@ -761,27 +707,16 @@
+ static int pci_pm_restore(struct device *dev)
+ {
+       struct pci_dev *pci_dev = to_pci_dev(dev);
+-      struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
++      struct device_driver *drv = dev->driver;
+       int error = 0;
+-      /*
+-       * This is necessary for the hibernation error path in which restore is
+-       * called without restoring the standard config registers of the device.
+-       */
+-      if (pci_dev->state_saved)
+-              pci_restore_standard_config(pci_dev);
+-
+       if (pci_has_legacy_pm_support(pci_dev))
+               return pci_legacy_resume(dev);
+-      pci_pm_default_resume(pci_dev);
++      error = pci_pm_default_resume(pci_dev);
+-      if (pm) {
+-              if (pm->restore)
+-                      error = pm->restore(dev);
+-      } else {
+-              pci_pm_reenable_device(pci_dev);
+-      }
++      if (!error && drv && drv->pm && drv->pm->restore)
++              error = drv->pm->restore(dev);
+       return error;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pcie/aer/aerdrv_core.c linux-2.6.29-rc3.owrt/drivers/pci/pcie/aer/aerdrv_core.c
+--- linux-2.6.29.owrt/drivers/pci/pcie/aer/aerdrv_core.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pcie/aer/aerdrv_core.c   2009-05-10 23:48:29.000000000 +0200
+@@ -108,37 +108,6 @@
+ }
+ #endif  /*  0  */
+-
+-static void set_device_error_reporting(struct pci_dev *dev, void *data)
+-{
+-      bool enable = *((bool *)data);
+-
+-      if (dev->pcie_type != PCIE_RC_PORT &&
+-          dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+-          dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+-              return;
+-
+-      if (enable)
+-              pci_enable_pcie_error_reporting(dev);
+-      else
+-              pci_disable_pcie_error_reporting(dev);
+-}
+-
+-/**
+- * set_downstream_devices_error_reporting - enable/disable the error reporting  bits on the root port and its downstream ports.
+- * @dev: pointer to root port's pci_dev data structure
+- * @enable: true = enable error reporting, false = disable error reporting.
+- */
+-static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+-                                                 bool enable)
+-{
+-      set_device_error_reporting(dev, &enable);
+-
+-      if (!dev->subordinate)
+-              return;
+-      pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+-}
+-
+ static int find_device_iter(struct device *device, void *data)
+ {
+       struct pci_dev *dev;
+@@ -556,11 +525,15 @@
+       pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, &reg32);
+       pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
+-      /*
+-       * Enable error reporting for the root port device and downstream port
+-       * devices.
+-       */
+-      set_downstream_devices_error_reporting(pdev, true);
++      /* Enable Root Port device reporting error itself */
++      pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, &reg16);
++      reg16 = reg16 |
++              PCI_EXP_DEVCTL_CERE |
++              PCI_EXP_DEVCTL_NFERE |
++              PCI_EXP_DEVCTL_FERE |
++              PCI_EXP_DEVCTL_URRE;
++      pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
++              reg16);
+       /* Enable Root Port's interrupt in response to error messages */
+       pci_write_config_dword(pdev,
+@@ -580,12 +553,6 @@
+       u32 reg32;
+       int pos;
+-      /*
+-       * Disable error reporting for the root port device and downstream port
+-       * devices.
+-       */
+-      set_downstream_devices_error_reporting(pdev, false);
+-
+       pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+       /* Disable Root's interrupt in response to error messages */
+       pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pcie/aspm.c linux-2.6.29-rc3.owrt/drivers/pci/pcie/aspm.c
+--- linux-2.6.29.owrt/drivers/pci/pcie/aspm.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pcie/aspm.c      2009-05-10 23:48:29.000000000 +0200
+@@ -718,9 +718,9 @@
+       /*
+        * All PCIe functions are in one slot, remove one function will remove
+-       * the whole slot, so just wait until we are the last function left.
++       * the the whole slot, so just wait
+        */
+-      if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices))
++      if (!list_empty(&parent->subordinate->devices))
+               goto out;
+       /* All functions are removed, so just disable ASPM for the link */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pcie/portdrv_pci.c linux-2.6.29-rc3.owrt/drivers/pci/pcie/portdrv_pci.c
+--- linux-2.6.29.owrt/drivers/pci/pcie/portdrv_pci.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pcie/portdrv_pci.c       2009-05-10 23:48:29.000000000 +0200
+@@ -55,13 +55,25 @@
+ }
++static int pcie_portdrv_suspend_late(struct pci_dev *dev, pm_message_t state)
++{
++      return pci_save_state(dev);
++}
++
++static int pcie_portdrv_resume_early(struct pci_dev *dev)
++{
++      return pci_restore_state(dev);
++}
++
+ static int pcie_portdrv_resume(struct pci_dev *dev)
+ {
+-      pci_set_master(dev);
++      pcie_portdrv_restore_config(dev);
+       return pcie_port_device_resume(dev);
+ }
+ #else
+ #define pcie_portdrv_suspend NULL
++#define pcie_portdrv_suspend_late NULL
++#define pcie_portdrv_resume_early NULL
+ #define pcie_portdrv_resume NULL
+ #endif
+@@ -97,13 +109,14 @@
+       pcie_portdrv_save_config(dev);
++      pci_enable_pcie_error_reporting(dev);
++
+       return 0;
+ }
+ static void pcie_portdrv_remove (struct pci_dev *dev)
+ {
+       pcie_port_device_remove(dev);
+-      pci_disable_device(dev);
+       kfree(pci_get_drvdata(dev));
+ }
+@@ -279,6 +292,8 @@
+       .remove         = pcie_portdrv_remove,
+       .suspend        = pcie_portdrv_suspend,
++      .suspend_late   = pcie_portdrv_suspend_late,
++      .resume_early   = pcie_portdrv_resume_early,
+       .resume         = pcie_portdrv_resume,
+       .err_handler    = &pcie_portdrv_err_handler,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pci.h linux-2.6.29-rc3.owrt/drivers/pci/pci.h
+--- linux-2.6.29.owrt/drivers/pci/pci.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pci.h    2009-05-10 23:48:29.000000000 +0200
+@@ -16,21 +16,21 @@
+ #endif
+ /**
+- * struct pci_platform_pm_ops - Firmware PM callbacks
++ * Firmware PM callbacks
+  *
+- * @is_manageable: returns 'true' if given device is power manageable by the
+- *                 platform firmware
++ * @is_manageable - returns 'true' if given device is power manageable by the
++ *                  platform firmware
+  *
+- * @set_state: invokes the platform firmware to set the device's power state
++ * @set_state - invokes the platform firmware to set the device's power state
+  *
+- * @choose_state: returns PCI power state of given device preferred by the
+- *                platform; to be used during system-wide transitions from a
+- *                sleeping state to the working state and vice versa
++ * @choose_state - returns PCI power state of given device preferred by the
++ *                 platform; to be used during system-wide transitions from a
++ *                 sleeping state to the working state and vice versa
+  *
+- * @can_wakeup: returns 'true' if given device is capable of waking up the
+- *              system from a sleeping state
++ * @can_wakeup - returns 'true' if given device is capable of waking up the
++ *               system from a sleeping state
+  *
+- * @sleep_wake: enables/disables the system wake up capability of given device
++ * @sleep_wake - enables/disables the system wake up capability of given device
+  *
+  * If given platform is generally capable of power managing PCI devices, all of
+  * these callbacks are mandatory.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/pci-sysfs.c linux-2.6.29-rc3.owrt/drivers/pci/pci-sysfs.c
+--- linux-2.6.29.owrt/drivers/pci/pci-sysfs.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/pci-sysfs.c      2009-05-10 23:48:29.000000000 +0200
+@@ -768,8 +768,8 @@
+               return -EINVAL;
+       
+       rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */
+-      if (!rom || !size)
+-              return -EIO;
++      if (!rom)
++              return 0;
+               
+       if (off >= size)
+               count = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/quirks.c linux-2.6.29-rc3.owrt/drivers/pci/quirks.c
+--- linux-2.6.29.owrt/drivers/pci/quirks.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/quirks.c 2009-05-10 23:48:29.000000000 +0200
+@@ -23,7 +23,6 @@
+ #include <linux/acpi.h>
+ #include <linux/kallsyms.h>
+ #include <linux/dmi.h>
+-#include <linux/pci-aspm.h>
+ #include "pci.h"
+ int isa_dma_bridge_buggy;
+@@ -1585,7 +1584,6 @@
+  */
+ #define AMD_813X_MISC                 0x40
+ #define AMD_813X_NOIOAMODE            (1<<0)
+-#define AMD_813X_REV_B2                       0x13
+ static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
+ {
+@@ -1593,8 +1591,6 @@
+       if (noioapicquirk)
+               return;
+-      if (dev->revision == AMD_813X_REV_B2)
+-              return;
+       pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
+       pci_config_dword &= ~AMD_813X_NOIOAMODE;
+@@ -1750,30 +1746,6 @@
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
+-/*
+- * The 82575 and 82598 may experience data corruption issues when transitioning
+- * out of L0S.  To prevent this we need to disable L0S on the pci-e link
+- */
+-static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+-{
+-      dev_info(&dev->dev, "Disabling L0s\n");
+-      pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+-}
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+-
+ static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
+ {
+       /* rev 1 ncr53c810 chips don't set the class at all which means
+@@ -2009,6 +1981,7 @@
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
+                       quirk_msi_ht_cap);
++
+ /* The nVidia CK804 chipset may have 2 HT MSI mappings.
+  * MSI are supported if the MSI capability set in any of these mappings.
+  */
+@@ -2059,9 +2032,6 @@
+                        PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+                        ht_enable_msi_mapping);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+-                       ht_enable_msi_mapping);
+-
+ /* The P5N32-SLI Premium motherboard from Asus has a problem with msi
+  * for the MCP55 NIC. It is not yet determined whether the msi problem
+  * also affects other devices. As for now, turn off msi for this device.
+@@ -2078,104 +2048,10 @@
+                       PCI_DEVICE_ID_NVIDIA_NVENET_15,
+                       nvenet_msi_disable);
+-static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
+-{
+-      struct pci_dev *host_bridge;
+-      int pos;
+-      int i, dev_no;
+-      int found = 0;
+-
+-      dev_no = dev->devfn >> 3;
+-      for (i = dev_no; i >= 0; i--) {
+-              host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+-              if (!host_bridge)
+-                      continue;
+-
+-              pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+-              if (pos != 0) {
+-                      found = 1;
+-                      break;
+-              }
+-              pci_dev_put(host_bridge);
+-      }
+-
+-      if (!found)
+-              return;
+-
+-      /* root did that ! */
+-      if (msi_ht_cap_enabled(host_bridge))
+-              goto out;
+-
+-      ht_enable_msi_mapping(dev);
+-
+-out:
+-      pci_dev_put(host_bridge);
+-}
+-
+-static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+-{
+-      int pos, ttl = 48;
+-
+-      pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+-      while (pos && ttl--) {
+-              u8 flags;
+-
+-              if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+-                                       &flags) == 0) {
+-                      dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
+-
+-                      pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+-                                            flags & ~HT_MSI_FLAGS_ENABLE);
+-              }
+-              pos = pci_find_next_ht_capability(dev, pos,
+-                                                HT_CAPTYPE_MSI_MAPPING);
+-      }
+-}
+-
+-static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+-{
+-      int pos, ttl = 48;
+-      int found = 0;
+-
+-      /* check if there is HT MSI cap or enabled on this device */
+-      pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+-      while (pos && ttl--) {
+-              u8 flags;
+-
+-              if (found < 1)
+-                      found = 1;
+-              if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+-                                       &flags) == 0) {
+-                      if (flags & HT_MSI_FLAGS_ENABLE) {
+-                              if (found < 2) {
+-                                      found = 2;
+-                                      break;
+-                              }
+-                      }
+-              }
+-              pos = pci_find_next_ht_capability(dev, pos,
+-                                                HT_CAPTYPE_MSI_MAPPING);
+-      }
+-
+-      return found;
+-}
+-
+ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+ {
+       struct pci_dev *host_bridge;
+-      int pos;
+-      int found;
+-
+-      /* Enabling HT MSI mapping on this device breaks MCP51 */
+-      if (dev->device == 0x270)
+-              return;
+-
+-      /* check if there is HT MSI cap or enabled on this device */
+-      found = ht_check_msi_mapping(dev);
+-
+-      /* no HT MSI CAP */
+-      if (found == 0)
+-              return;
++      int pos, ttl = 48;
+       /*
+        * HT MSI mapping should be disabled on devices that are below
+@@ -2191,19 +2067,24 @@
+       pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+       if (pos != 0) {
+               /* Host bridge is to HT */
+-              if (found == 1) {
+-                      /* it is not enabled, try to enable it */
+-                      nv_ht_enable_msi_mapping(dev);
+-              }
++              ht_enable_msi_mapping(dev);
+               return;
+       }
+-      /* HT MSI is not enabled */
+-      if (found == 1)
+-              return;
+-
+       /* Host bridge is not to HT, disable HT MSI mapping on this device */
+-      ht_disable_msi_mapping(dev);
++      pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
++      while (pos && ttl--) {
++              u8 flags;
++
++              if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
++                                       &flags) == 0) {
++                      dev_info(&dev->dev, "Disabling HT MSI mapping");
++                      pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
++                                            flags & ~HT_MSI_FLAGS_ENABLE);
++              }
++              pos = pci_find_next_ht_capability(dev, pos,
++                                                HT_CAPTYPE_MSI_MAPPING);
++      }
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/pci/rom.c linux-2.6.29-rc3.owrt/drivers/pci/rom.c
+--- linux-2.6.29.owrt/drivers/pci/rom.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/pci/rom.c    2009-05-10 23:48:29.000000000 +0200
+@@ -55,7 +55,6 @@
+ /**
+  * pci_get_rom_size - obtain the actual size of the ROM image
+- * @pdev: target PCI device
+  * @rom: kernel virtual pointer to image of ROM
+  * @size: size of PCI window
+  *  return: size of actual ROM image
+@@ -64,7 +63,7 @@
+  * The PCI window size could be much larger than the
+  * actual image size.
+  */
+-size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
++size_t pci_get_rom_size(void __iomem *rom, size_t size)
+ {
+       void __iomem *image;
+       int last_image;
+@@ -73,10 +72,8 @@
+       do {
+               void __iomem *pds;
+               /* Standard PCI ROMs start out with these bytes 55 AA */
+-              if (readb(image) != 0x55) {
+-                      dev_err(&pdev->dev, "Invalid ROM contents\n");
++              if (readb(image) != 0x55)
+                       break;
+-              }
+               if (readb(image + 1) != 0xAA)
+                       break;
+               /* get the PCI data structure and check its signature */
+@@ -162,7 +159,7 @@
+        * size is much larger than the actual size of the ROM.
+        * True size is important if the ROM is going to be copied.
+        */
+-      *size = pci_get_rom_size(pdev, rom, *size);
++      *size = pci_get_rom_size(rom, *size);
+       return rom;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/acer-wmi.c linux-2.6.29-rc3.owrt/drivers/platform/x86/acer-wmi.c
+--- linux-2.6.29.owrt/drivers/platform/x86/acer-wmi.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/acer-wmi.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1026,7 +1026,7 @@
+       kfree(wireless_rfkill->data);
+       rfkill_unregister(wireless_rfkill);
+       if (has_cap(ACER_CAP_BLUETOOTH)) {
+-              kfree(bluetooth_rfkill->data);
++              kfree(wireless_rfkill->data);
+               rfkill_unregister(bluetooth_rfkill);
+       }
+       return;
+@@ -1297,7 +1297,7 @@
+       set_quirks();
+-      if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
++      if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+               interface->capability &= ~ACER_CAP_BRIGHTNESS;
+               printk(ACER_INFO "Brightness must be controlled by "
+                      "generic video driver\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/asus_acpi.c linux-2.6.29-rc3.owrt/drivers/platform/x86/asus_acpi.c
+--- linux-2.6.29.owrt/drivers/platform/x86/asus_acpi.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/asus_acpi.c     2009-05-10 23:48:29.000000000 +0200
+@@ -143,7 +143,6 @@
+                                                        S1300N, S5200N*/
+               A4S,            /* Z81sp */
+               F3Sa,           /* (Centrino) */
+-              R1F,
+               END_MODEL
+       } model;                /* Models currently supported */
+       u16 event_count[128];   /* Count for each event TODO make this better */
+@@ -421,18 +420,7 @@
+               .display_get    = "\\ADVG",
+               .display_set    = "SDSP",
+       },
+-      {
+-              .name = "R1F",
+-              .mt_bt_switch = "BLED",
+-              .mt_mled = "MLED",
+-              .mt_wled = "WLED",
+-              .mt_lcd_switch = "\\Q10",
+-              .lcd_status = "\\GP06",
+-              .brightness_set = "SPLV",
+-              .brightness_get = "GPLV",
+-              .display_set = "SDSP",
+-              .display_get = "\\INFB"
+-      }
++
+ };
+ /* procdir we use */
+@@ -1177,8 +1165,6 @@
+               return W3V;
+       else if (strncmp(model, "W5A", 3) == 0)
+               return W5A;
+-      else if (strncmp(model, "R1F", 3) == 0)
+-              return R1F;
+       else if (strncmp(model, "A4S", 3) == 0)
+               return A4S;
+       else if (strncmp(model, "F3Sa", 4) == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/asus-laptop.c linux-2.6.29-rc3.owrt/drivers/platform/x86/asus-laptop.c
+--- linux-2.6.29.owrt/drivers/platform/x86/asus-laptop.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/asus-laptop.c   2009-05-10 23:48:29.000000000 +0200
+@@ -46,7 +46,6 @@
+ #include <acpi/acpi_drivers.h>
+ #include <acpi/acpi_bus.h>
+ #include <asm/uaccess.h>
+-#include <linux/input.h>
+ #define ASUS_LAPTOP_VERSION "0.42"
+@@ -182,8 +181,6 @@
+       u8 light_level;         //light sensor level
+       u8 light_switch;        //light sensor switch value
+       u16 event_count[128];   //count for each event TODO make this better
+-      struct input_dev *inputdev;
+-      u16 *keycode_map;
+ };
+ /*
+@@ -253,37 +250,6 @@
+ ASUS_LED(pled, "phone");
+ ASUS_LED(gled, "gaming");
+-struct key_entry {
+-      char type;
+-      u8 code;
+-      u16 keycode;
+-};
+-
+-enum { KE_KEY, KE_END };
+-
+-static struct key_entry asus_keymap[] = {
+-      {KE_KEY, 0x30, KEY_VOLUMEUP},
+-      {KE_KEY, 0x31, KEY_VOLUMEDOWN},
+-      {KE_KEY, 0x32, KEY_MUTE},
+-      {KE_KEY, 0x33, KEY_SWITCHVIDEOMODE},
+-      {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
+-      {KE_KEY, 0x40, KEY_PREVIOUSSONG},
+-      {KE_KEY, 0x41, KEY_NEXTSONG},
+-      {KE_KEY, 0x43, KEY_STOP},
+-      {KE_KEY, 0x45, KEY_PLAYPAUSE},
+-      {KE_KEY, 0x50, KEY_EMAIL},
+-      {KE_KEY, 0x51, KEY_WWW},
+-      {KE_KEY, 0x5C, BTN_EXTRA},  /* Performance */
+-      {KE_KEY, 0x5D, KEY_WLAN},
+-      {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
+-      {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
+-      {KE_KEY, 0x82, KEY_CAMERA},
+-      {KE_KEY, 0x8A, KEY_TV},
+-      {KE_KEY, 0x95, KEY_MEDIA},
+-      {KE_KEY, 0x99, KEY_PHONE},
+-      {KE_END, 0},
+-};
+-
+ /*
+  * This function evaluates an ACPI method, given an int as parameter, the
+  * method is searched within the scope of the handle, can be NULL. The output
+@@ -754,69 +720,8 @@
+       return store_status(buf, count, NULL, GPS_ON);
+ }
+-/*
+- * Hotkey functions
+- */
+-static struct key_entry *asus_get_entry_by_scancode(int code)
+-{
+-      struct key_entry *key;
+-
+-      for (key = asus_keymap; key->type != KE_END; key++)
+-              if (code == key->code)
+-                      return key;
+-
+-      return NULL;
+-}
+-
+-static struct key_entry *asus_get_entry_by_keycode(int code)
+-{
+-      struct key_entry *key;
+-
+-      for (key = asus_keymap; key->type != KE_END; key++)
+-              if (code == key->keycode && key->type == KE_KEY)
+-                      return key;
+-
+-      return NULL;
+-}
+-
+-static int asus_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+-{
+-      struct key_entry *key = asus_get_entry_by_scancode(scancode);
+-
+-      if (key && key->type == KE_KEY) {
+-              *keycode = key->keycode;
+-              return 0;
+-      }
+-
+-      return -EINVAL;
+-}
+-
+-static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode)
+-{
+-      struct key_entry *key;
+-      int old_keycode;
+-
+-      if (keycode < 0 || keycode > KEY_MAX)
+-              return -EINVAL;
+-
+-      key = asus_get_entry_by_scancode(scancode);
+-      if (key && key->type == KE_KEY) {
+-              old_keycode = key->keycode;
+-              key->keycode = keycode;
+-              set_bit(keycode, dev->keybit);
+-              if (!asus_get_entry_by_keycode(old_keycode))
+-                      clear_bit(old_keycode, dev->keybit);
+-              return 0;
+-      }
+-
+-      return -EINVAL;
+-}
+-
+ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+ {
+-      static struct key_entry *key;
+-      u16 count;
+-
+       /* TODO Find a better way to handle events count. */
+       if (!hotk)
+               return;
+@@ -833,26 +738,10 @@
+               lcd_blank(FB_BLANK_POWERDOWN);
+       }
+-      count = hotk->event_count[event % 128]++;
+-      acpi_bus_generate_proc_event(hotk->device, event, count);
+-      acpi_bus_generate_netlink_event(hotk->device->pnp.device_class,
+-                                      dev_name(&hotk->device->dev), event,
+-                                      count);
+-
+-      if (hotk->inputdev) {
+-              key = asus_get_entry_by_scancode(event);
+-              if (!key)
+-                      return ;
+-
+-              switch (key->type) {
+-              case KE_KEY:
+-                      input_report_key(hotk->inputdev, key->keycode, 1);
+-                      input_sync(hotk->inputdev);
+-                      input_report_key(hotk->inputdev, key->keycode, 0);
+-                      input_sync(hotk->inputdev);
+-                      break;
+-              }
+-      }
++      acpi_bus_generate_proc_event(hotk->device, event,
++                              hotk->event_count[event % 128]++);
++
++      return;
+ }
+ #define ASUS_CREATE_DEVICE_ATTR(_name)                                        \
+@@ -1070,38 +959,6 @@
+       return AE_OK;
+ }
+-static int asus_input_init(void)
+-{
+-      const struct key_entry *key;
+-      int result;
+-
+-      hotk->inputdev = input_allocate_device();
+-      if (!hotk->inputdev) {
+-              printk(ASUS_INFO "Unable to allocate input device\n");
+-              return 0;
+-      }
+-      hotk->inputdev->name = "Asus Laptop extra buttons";
+-      hotk->inputdev->phys = ASUS_HOTK_FILE "/input0";
+-      hotk->inputdev->id.bustype = BUS_HOST;
+-      hotk->inputdev->getkeycode = asus_getkeycode;
+-      hotk->inputdev->setkeycode = asus_setkeycode;
+-
+-      for (key = asus_keymap; key->type != KE_END; key++) {
+-              switch (key->type) {
+-              case KE_KEY:
+-                      set_bit(EV_KEY, hotk->inputdev->evbit);
+-                      set_bit(key->keycode, hotk->inputdev->keybit);
+-                      break;
+-              }
+-      }
+-      result = input_register_device(hotk->inputdev);
+-      if (result) {
+-              printk(ASUS_INFO "Unable to register input device\n");
+-              input_free_device(hotk->inputdev);
+-      }
+-      return result;
+-}
+-
+ static int asus_hotk_check(void)
+ {
+       int result = 0;
+@@ -1187,7 +1044,7 @@
+       /* GPS is on by default */
+       write_status(NULL, 1, GPS_ON);
+-end:
++      end:
+       if (result) {
+               kfree(hotk->name);
+               kfree(hotk);
+@@ -1234,17 +1091,10 @@
+       ASUS_LED_UNREGISTER(gled);
+ }
+-static void asus_input_exit(void)
+-{
+-      if (hotk->inputdev)
+-              input_unregister_device(hotk->inputdev);
+-}
+-
+ static void __exit asus_laptop_exit(void)
+ {
+       asus_backlight_exit();
+       asus_led_exit();
+-      asus_input_exit();
+       acpi_bus_unregister_driver(&asus_hotk_driver);
+       sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group);
+@@ -1366,10 +1216,6 @@
+               printk(ASUS_INFO "Brightness ignored, must be controlled by "
+                      "ACPI video driver\n");
+-      result = asus_input_init();
+-      if (result)
+-              goto fail_input;
+-
+       result = asus_led_init(dev);
+       if (result)
+               goto fail_led;
+@@ -1396,25 +1242,22 @@
+       return 0;
+-fail_sysfs:
++      fail_sysfs:
+       platform_device_del(asuspf_device);
+-fail_platform_device2:
++      fail_platform_device2:
+       platform_device_put(asuspf_device);
+-fail_platform_device1:
++      fail_platform_device1:
+       platform_driver_unregister(&asuspf_driver);
+-fail_platform_driver:
++      fail_platform_driver:
+       asus_led_exit();
+-fail_led:
+-      asus_input_exit();
+-
+-fail_input:
++      fail_led:
+       asus_backlight_exit();
+-fail_backlight:
++      fail_backlight:
+       return result;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/eeepc-laptop.c linux-2.6.29-rc3.owrt/drivers/platform/x86/eeepc-laptop.c
+--- linux-2.6.29.owrt/drivers/platform/x86/eeepc-laptop.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/eeepc-laptop.c  2009-05-10 23:48:29.000000000 +0200
+@@ -30,7 +30,6 @@
+ #include <linux/uaccess.h>
+ #include <linux/input.h>
+ #include <linux/rfkill.h>
+-#include <linux/pci.h>
+ #define EEEPC_LAPTOP_VERSION  "0.1"
+@@ -162,10 +161,6 @@
+       {KE_KEY, 0x13, KEY_MUTE },
+       {KE_KEY, 0x14, KEY_VOLUMEDOWN },
+       {KE_KEY, 0x15, KEY_VOLUMEUP },
+-      {KE_KEY, 0x1a, KEY_COFFEE },
+-      {KE_KEY, 0x1b, KEY_ZOOM },
+-      {KE_KEY, 0x1c, KEY_PROG2 },
+-      {KE_KEY, 0x1d, KEY_PROG3 },
+       {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
+       {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
+       {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
+@@ -515,59 +510,18 @@
+ static void notify_brn(void)
+ {
+       struct backlight_device *bd = eeepc_backlight_device;
+-      if (bd)
+-              bd->props.brightness = read_brightness(bd);
+-}
+-
+-static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+-{
+-      struct pci_dev *dev;
+-      struct pci_bus *bus = pci_find_bus(0, 1);
+-
+-      if (event != ACPI_NOTIFY_BUS_CHECK)
+-              return;
+-
+-      if (!bus) {
+-              printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+-              return;
+-      }
+-
+-      if (get_acpi(CM_ASL_WLAN) == 1) {
+-              dev = pci_get_slot(bus, 0);
+-              if (dev) {
+-                      /* Device already present */
+-                      pci_dev_put(dev);
+-                      return;
+-              }
+-              dev = pci_scan_single_device(bus, 0);
+-              if (dev) {
+-                      pci_bus_assign_resources(bus);
+-                      if (pci_bus_add_device(dev))
+-                              printk(EEEPC_ERR "Unable to hotplug wifi\n");
+-              }
+-      } else {
+-              dev = pci_get_slot(bus, 0);
+-              if (dev) {
+-                      pci_remove_bus_device(dev);
+-                      pci_dev_put(dev);
+-              }
+-      }
++      bd->props.brightness = read_brightness(bd);
+ }
+ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
+ {
+       static struct key_entry *key;
+-      u16 count;
+-
+       if (!ehotk)
+               return;
+       if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
+               notify_brn();
+-      count = ehotk->event_count[event % 128]++;
+-      acpi_bus_generate_proc_event(ehotk->device, event, count);
+-      acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
+-                                      dev_name(&ehotk->device->dev), event,
+-                                      count);
++      acpi_bus_generate_proc_event(ehotk->device, event,
++                                   ehotk->event_count[event % 128]++);
+       if (ehotk->inputdev) {
+               key = eepc_get_entry_by_scancode(event);
+               if (key) {
+@@ -585,45 +539,6 @@
+       }
+ }
+-static int eeepc_register_rfkill_notifier(char *node)
+-{
+-      acpi_status status = AE_OK;
+-      acpi_handle handle;
+-
+-      status = acpi_get_handle(NULL, node, &handle);
+-
+-      if (ACPI_SUCCESS(status)) {
+-              status = acpi_install_notify_handler(handle,
+-                                                   ACPI_SYSTEM_NOTIFY,
+-                                                   eeepc_rfkill_notify,
+-                                                   NULL);
+-              if (ACPI_FAILURE(status))
+-                      printk(EEEPC_WARNING
+-                             "Failed to register notify on %s\n", node);
+-      } else
+-              return -ENODEV;
+-
+-      return 0;
+-}
+-
+-static void eeepc_unregister_rfkill_notifier(char *node)
+-{
+-      acpi_status status = AE_OK;
+-      acpi_handle handle;
+-
+-      status = acpi_get_handle(NULL, node, &handle);
+-
+-      if (ACPI_SUCCESS(status)) {
+-              status = acpi_remove_notify_handler(handle,
+-                                                   ACPI_SYSTEM_NOTIFY,
+-                                                   eeepc_rfkill_notify);
+-              if (ACPI_FAILURE(status))
+-                      printk(EEEPC_ERR
+-                             "Error removing rfkill notify handler %s\n",
+-                              node);
+-      }
+-}
+-
+ static int eeepc_hotk_add(struct acpi_device *device)
+ {
+       acpi_status status = AE_OK;
+@@ -643,7 +558,7 @@
+       ehotk->device = device;
+       result = eeepc_hotk_check();
+       if (result)
+-              goto ehotk_fail;
++              goto end;
+       status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
+                                            eeepc_hotk_notify, ehotk);
+       if (ACPI_FAILURE(status))
+@@ -654,25 +569,18 @@
+                                                          RFKILL_TYPE_WLAN);
+               if (!ehotk->eeepc_wlan_rfkill)
+-                      goto wlan_fail;
++                      goto end;
+               ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan";
+               ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set;
+               ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state;
+-              if (get_acpi(CM_ASL_WLAN) == 1) {
++              if (get_acpi(CM_ASL_WLAN) == 1)
+                       ehotk->eeepc_wlan_rfkill->state =
+                               RFKILL_STATE_UNBLOCKED;
+-                      rfkill_set_default(RFKILL_TYPE_WLAN,
+-                                         RFKILL_STATE_UNBLOCKED);
+-              } else {
++              else
+                       ehotk->eeepc_wlan_rfkill->state =
+                               RFKILL_STATE_SOFT_BLOCKED;
+-                      rfkill_set_default(RFKILL_TYPE_WLAN,
+-                                         RFKILL_STATE_SOFT_BLOCKED);
+-              }
+-              result = rfkill_register(ehotk->eeepc_wlan_rfkill);
+-              if (result)
+-                      goto wlan_fail;
++              rfkill_register(ehotk->eeepc_wlan_rfkill);
+       }
+       if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
+@@ -680,47 +588,27 @@
+                       rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH);
+               if (!ehotk->eeepc_bluetooth_rfkill)
+-                      goto bluetooth_fail;
++                      goto end;
+               ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth";
+               ehotk->eeepc_bluetooth_rfkill->toggle_radio =
+                       eeepc_bluetooth_rfkill_set;
+               ehotk->eeepc_bluetooth_rfkill->get_state =
+                       eeepc_bluetooth_rfkill_state;
+-              if (get_acpi(CM_ASL_BLUETOOTH) == 1) {
++              if (get_acpi(CM_ASL_BLUETOOTH) == 1)
+                       ehotk->eeepc_bluetooth_rfkill->state =
+                               RFKILL_STATE_UNBLOCKED;
+-                      rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
+-                                         RFKILL_STATE_UNBLOCKED);
+-              } else {
++              else
+                       ehotk->eeepc_bluetooth_rfkill->state =
+                               RFKILL_STATE_SOFT_BLOCKED;
+-                      rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
+-                                         RFKILL_STATE_SOFT_BLOCKED);
+-              }
+-
+-              result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
+-              if (result)
+-                      goto bluetooth_fail;
++              rfkill_register(ehotk->eeepc_bluetooth_rfkill);
+       }
+-      eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+-      eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+-
+-      return 0;
+-
+- bluetooth_fail:
+-      if (ehotk->eeepc_bluetooth_rfkill)
+-              rfkill_free(ehotk->eeepc_bluetooth_rfkill);
+-      rfkill_unregister(ehotk->eeepc_wlan_rfkill);
+-      ehotk->eeepc_wlan_rfkill = NULL;
+- wlan_fail:
+-      if (ehotk->eeepc_wlan_rfkill)
+-              rfkill_free(ehotk->eeepc_wlan_rfkill);
+- ehotk_fail:
+-      kfree(ehotk);
+-      ehotk = NULL;
+-
++ end:
++      if (result) {
++              kfree(ehotk);
++              ehotk = NULL;
++      }
+       return result;
+ }
+@@ -734,10 +622,6 @@
+                                           eeepc_hotk_notify);
+       if (ACPI_FAILURE(status))
+               printk(EEEPC_ERR "Error removing notify handler\n");
+-
+-      eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+-      eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+-
+       kfree(ehotk);
+       return 0;
+ }
+@@ -853,21 +737,13 @@
+ {
+       if (eeepc_backlight_device)
+               backlight_device_unregister(eeepc_backlight_device);
+-      eeepc_backlight_device = NULL;
+-}
+-
+-static void eeepc_rfkill_exit(void)
+-{
++      if (ehotk->inputdev)
++              input_unregister_device(ehotk->inputdev);
+       if (ehotk->eeepc_wlan_rfkill)
+               rfkill_unregister(ehotk->eeepc_wlan_rfkill);
+       if (ehotk->eeepc_bluetooth_rfkill)
+               rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+-}
+-
+-static void eeepc_input_exit(void)
+-{
+-      if (ehotk->inputdev)
+-              input_unregister_device(ehotk->inputdev);
++      eeepc_backlight_device = NULL;
+ }
+ static void eeepc_hwmon_exit(void)
+@@ -886,8 +762,6 @@
+ static void __exit eeepc_laptop_exit(void)
+ {
+       eeepc_backlight_exit();
+-      eeepc_rfkill_exit();
+-      eeepc_input_exit();
+       eeepc_hwmon_exit();
+       acpi_bus_unregister_driver(&eeepc_hotk_driver);
+       sysfs_remove_group(&platform_device->dev.kobj,
+@@ -991,8 +865,6 @@
+ fail_hwmon:
+       eeepc_backlight_exit();
+ fail_backlight:
+-      eeepc_input_exit();
+-      eeepc_rfkill_exit();
+       return result;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/fujitsu-laptop.c linux-2.6.29-rc3.owrt/drivers/platform/x86/fujitsu-laptop.c
+--- linux-2.6.29.owrt/drivers/platform/x86/fujitsu-laptop.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/fujitsu-laptop.c        2009-05-10 23:48:29.000000000 +0200
+@@ -166,7 +166,6 @@
+       struct platform_device *pf_device;
+       struct kfifo *fifo;
+       spinlock_t fifo_lock;
+-      int rfkill_supported;
+       int rfkill_state;
+       int logolamp_registered;
+       int kblamps_registered;
+@@ -527,7 +526,7 @@
+ show_lid_state(struct device *dev,
+                       struct device_attribute *attr, char *buf)
+ {
+-      if (!(fujitsu_hotkey->rfkill_supported & 0x100))
++      if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+               return sprintf(buf, "unknown\n");
+       if (fujitsu_hotkey->rfkill_state & 0x100)
+               return sprintf(buf, "open\n");
+@@ -539,7 +538,7 @@
+ show_dock_state(struct device *dev,
+                       struct device_attribute *attr, char *buf)
+ {
+-      if (!(fujitsu_hotkey->rfkill_supported & 0x200))
++      if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+               return sprintf(buf, "unknown\n");
+       if (fujitsu_hotkey->rfkill_state & 0x200)
+               return sprintf(buf, "docked\n");
+@@ -551,7 +550,7 @@
+ show_radios_state(struct device *dev,
+                       struct device_attribute *attr, char *buf)
+ {
+-      if (!(fujitsu_hotkey->rfkill_supported & 0x20))
++      if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+               return sprintf(buf, "unknown\n");
+       if (fujitsu_hotkey->rfkill_state & 0x20)
+               return sprintf(buf, "on\n");
+@@ -929,17 +928,8 @@
+               ; /* No action, result is discarded */
+       vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
+-      fujitsu_hotkey->rfkill_supported =
+-              call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
+-
+-      /* Make sure our bitmask of supported functions is cleared if the
+-         RFKILL function block is not implemented, like on the S7020. */
+-      if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
+-              fujitsu_hotkey->rfkill_supported = 0;
+-
+-      if (fujitsu_hotkey->rfkill_supported)
+-              fujitsu_hotkey->rfkill_state =
+-                      call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
++      fujitsu_hotkey->rfkill_state =
++              call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+       /* Suspect this is a keymap of the application panel, print it */
+       printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
+@@ -1015,9 +1005,8 @@
+       input = fujitsu_hotkey->input;
+-      if (fujitsu_hotkey->rfkill_supported)
+-              fujitsu_hotkey->rfkill_state =
+-                      call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
++      fujitsu_hotkey->rfkill_state =
++              call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+       switch (event) {
+       case ACPI_FUJITSU_NOTIFY_CODE1:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/hp-wmi.c linux-2.6.29-rc3.owrt/drivers/platform/x86/hp-wmi.c
+--- linux-2.6.29.owrt/drivers/platform/x86/hp-wmi.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/hp-wmi.c        2009-05-10 23:48:29.000000000 +0200
+@@ -382,11 +382,6 @@
+               case KE_SW:
+                       set_bit(EV_SW, hp_wmi_input_dev->evbit);
+                       set_bit(key->keycode, hp_wmi_input_dev->swbit);
+-
+-                      /* Set initial dock state */
+-                      input_report_switch(hp_wmi_input_dev, key->keycode,
+-                                          hp_wmi_dock_state());
+-                      input_sync(hp_wmi_input_dev);
+                       break;
+               }
+       }
+@@ -446,7 +441,6 @@
+               bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+               bluetooth_rfkill->user_claim_unsupported = 1;
+               err = rfkill_register(bluetooth_rfkill);
+-              if (err)
+                       goto register_bluetooth_error;
+       }
+@@ -463,11 +457,9 @@
+       return 0;
+ register_wwan_err:
+-      if (bluetooth_rfkill)
+-              rfkill_unregister(bluetooth_rfkill);
++      rfkill_unregister(bluetooth_rfkill);
+ register_bluetooth_error:
+-      if (wifi_rfkill)
+-              rfkill_unregister(wifi_rfkill);
++      rfkill_unregister(wifi_rfkill);
+ add_sysfs_error:
+       cleanup_sysfs(device);
+       return err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/Kconfig linux-2.6.29-rc3.owrt/drivers/platform/x86/Kconfig
+--- linux-2.6.29.owrt/drivers/platform/x86/Kconfig     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/Kconfig 2009-05-10 23:48:29.000000000 +0200
+@@ -15,7 +15,8 @@
+ if X86_PLATFORM_DEVICES
+ config ACER_WMI
+-      tristate "Acer WMI Laptop Extras"
++      tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
++      depends on EXPERIMENTAL
+       depends on ACPI
+       depends on LEDS_CLASS
+       depends on NEW_LEDS
+@@ -38,10 +39,9 @@
+       tristate "Asus Laptop Extras (EXPERIMENTAL)"
+       depends on ACPI
+       depends on EXPERIMENTAL && !ACPI_ASUS
+-      select LEDS_CLASS
+-      select NEW_LEDS
+-      select BACKLIGHT_CLASS_DEVICE
+-      depends on INPUT
++      depends on LEDS_CLASS
++      depends on NEW_LEDS
++      depends on BACKLIGHT_CLASS_DEVICE
+       ---help---
+         This is the new Linux driver for Asus laptops. It may also support some
+         MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
+@@ -61,7 +61,6 @@
+       depends on EXPERIMENTAL
+       depends on BACKLIGHT_CLASS_DEVICE
+       depends on RFKILL
+-      depends on POWER_SUPPLY
+       default n
+       ---help---
+       This driver adds support for rfkill and backlight control to Dell
+@@ -184,11 +183,11 @@
+ config THINKPAD_ACPI
+       tristate "ThinkPad ACPI Laptop Extras"
+       depends on ACPI
+-      depends on INPUT
+       select BACKLIGHT_LCD_SUPPORT
+       select BACKLIGHT_CLASS_DEVICE
+       select HWMON
+       select NVRAM
++      select INPUT
+       select NEW_LEDS
+       select LEDS_CLASS
+       select NET
+@@ -301,7 +300,6 @@
+ config EEEPC_LAPTOP
+       tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
+       depends on ACPI
+-      depends on INPUT
+       depends on EXPERIMENTAL
+       select BACKLIGHT_CLASS_DEVICE
+       select HWMON
+@@ -314,8 +312,9 @@
+ config ACPI_WMI
+-      tristate "WMI"
++      tristate "WMI (EXPERIMENTAL)"
+       depends on ACPI
++      depends on EXPERIMENTAL
+       help
+         This driver adds support for the ACPI-WMI (Windows Management
+         Instrumentation) mapper device (PNP0C14) found on some systems.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/panasonic-laptop.c linux-2.6.29-rc3.owrt/drivers/platform/x86/panasonic-laptop.c
+--- linux-2.6.29.owrt/drivers/platform/x86/panasonic-laptop.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/panasonic-laptop.c      2009-05-10 23:48:29.000000000 +0200
+@@ -507,7 +507,7 @@
+       hkey_num = result & 0xf;
+-      if (hkey_num < 0 || hkey_num >= ARRAY_SIZE(pcc->keymap)) {
++      if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) {
+               ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+                                 "hotkey number out of range: %d\n",
+                                 hkey_num));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/thinkpad_acpi.c linux-2.6.29-rc3.owrt/drivers/platform/x86/thinkpad_acpi.c
+--- linux-2.6.29.owrt/drivers/platform/x86/thinkpad_acpi.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/thinkpad_acpi.c 2009-05-10 23:48:29.000000000 +0200
+@@ -7532,7 +7532,7 @@
+  * if it is not there yet.
+  */
+ #define IBM_BIOS_MODULE_ALIAS(__type) \
+-      MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
++      MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")
+ /* Non-ancient thinkpads */
+ MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
+@@ -7541,9 +7541,9 @@
+ /* Ancient thinkpad BIOSes have to be identified by
+  * BIOS type or model number, and there are far less
+  * BIOS types than model numbers... */
+-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
+-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
+-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
++IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]");
++IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");
++IBM_BIOS_MODULE_ALIAS("K[U,X-Z]");
+ MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+ MODULE_DESCRIPTION(TPACPI_DESC);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/platform/x86/wmi.c linux-2.6.29-rc3.owrt/drivers/platform/x86/wmi.c
+--- linux-2.6.29.owrt/drivers/platform/x86/wmi.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/platform/x86/wmi.c   2009-05-10 23:48:29.000000000 +0200
+@@ -708,7 +708,7 @@
+ static int __init acpi_wmi_init(void)
+ {
+-      int result;
++      acpi_status result;
+       INIT_LIST_HEAD(&wmi_blocks.list);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/power/ds2760_battery.c linux-2.6.29-rc3.owrt/drivers/power/ds2760_battery.c
+--- linux-2.6.29.owrt/drivers/power/ds2760_battery.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/power/ds2760_battery.c       2009-05-10 23:48:29.000000000 +0200
+@@ -180,13 +180,10 @@
+       di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
+       di->empty_uAh *= 1000; /* convert to µAh */
+-      if (di->full_active_uAh == di->empty_uAh)
+-              di->rem_capacity = 0;
+-      else
+-              /* From Maxim Application Note 131: remaining capacity =
+-               * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+-              di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+-                                  (di->full_active_uAh - di->empty_uAh);
++      /* From Maxim Application Note 131: remaining capacity =
++       * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
++      di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
++                          (di->full_active_uAh - di->empty_uAh);
+       if (di->rem_capacity < 0)
+               di->rem_capacity = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/power/pcf50633-charger.c linux-2.6.29-rc3.owrt/drivers/power/pcf50633-charger.c
+--- linux-2.6.29.owrt/drivers/power/pcf50633-charger.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/power/pcf50633-charger.c     2009-05-10 23:48:29.000000000 +0200
+@@ -199,8 +199,7 @@
+                       enum power_supply_property psp,
+                       union power_supply_propval *val)
+ {
+-      struct pcf50633_mbc *mbc = container_of(psy,
+-                              struct pcf50633_mbc, adapter);
++      struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+       int ret = 0;
+       switch (psp) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/regulator/bq24022.c linux-2.6.29-rc3.owrt/drivers/regulator/bq24022.c
+--- linux-2.6.29.owrt/drivers/regulator/bq24022.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/regulator/bq24022.c  2009-05-10 23:48:29.000000000 +0200
+@@ -152,7 +152,11 @@
+       platform_driver_unregister(&bq24022_driver);
+ }
+-module_init(bq24022_init);
++/*
++ * make sure this is probed before gpio_vbus and pda_power,
++ * but after asic3 or other GPIO expander drivers.
++ */
++subsys_initcall(bq24022_init);
+ module_exit(bq24022_exit);
+ MODULE_AUTHOR("Philipp Zabel");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/regulator/wm8350-regulator.c linux-2.6.29-rc3.owrt/drivers/regulator/wm8350-regulator.c
+--- linux-2.6.29.owrt/drivers/regulator/wm8350-regulator.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/regulator/wm8350-regulator.c 2009-05-10 23:48:29.000000000 +0200
+@@ -1435,7 +1435,7 @@
+       struct platform_device *pdev;
+       int ret;
+-      if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
++      if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
+               dev_err(wm8350->dev, "Invalid LED index %d\n", lednum);
+               return -ENODEV;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/Kconfig linux-2.6.29-rc3.owrt/drivers/rtc/Kconfig
+--- linux-2.6.29.owrt/drivers/rtc/Kconfig      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/Kconfig  2009-05-10 23:48:29.000000000 +0200
+@@ -241,12 +241,6 @@
+         If you say Y here you will get support for the
+         watchdog timer in the ST M41T60 and M41T80 RTC chips series.
+-config RTC_DRV_DM355EVM
+-      tristate "TI DaVinci DM355 EVM RTC"
+-      depends on MFD_DM355EVM_MSP
+-      help
+-        Supports the RTC firmware in the MSP430 on the DM355 EVM.
+-
+ config RTC_DRV_TWL92330
+       boolean "TI TWL92330/Menelaus"
+       depends on MENELAUS
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/Makefile linux-2.6.29-rc3.owrt/drivers/rtc/Makefile
+--- linux-2.6.29.owrt/drivers/rtc/Makefile     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/Makefile 2009-05-10 23:48:29.000000000 +0200
+@@ -23,7 +23,6 @@
+ obj-$(CONFIG_RTC_DRV_AU1XXX)  += rtc-au1xxx.o
+ obj-$(CONFIG_RTC_DRV_BFIN)    += rtc-bfin.o
+ obj-$(CONFIG_RTC_DRV_CMOS)    += rtc-cmos.o
+-obj-$(CONFIG_RTC_DRV_DM355EVM)        += rtc-dm355evm.o
+ obj-$(CONFIG_RTC_DRV_DS1216)  += rtc-ds1216.o
+ obj-$(CONFIG_RTC_DRV_DS1286)  += rtc-ds1286.o
+ obj-$(CONFIG_RTC_DRV_DS1302)  += rtc-ds1302.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/rtc-au1xxx.c linux-2.6.29-rc3.owrt/drivers/rtc/rtc-au1xxx.c
+--- linux-2.6.29.owrt/drivers/rtc/rtc-au1xxx.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/rtc-au1xxx.c     2009-05-10 23:48:29.000000000 +0200
+@@ -81,7 +81,7 @@
+       if (au_readl(SYS_TOYTRIM) != 32767) {
+               /* wait until hardware gives access to TRIM register */
+               t = 0x00100000;
+-              while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t)
++              while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && t--)
+                       msleep(1);
+               if (!t) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/rtc-dm355evm.c linux-2.6.29-rc3.owrt/drivers/rtc/rtc-dm355evm.c
+--- linux-2.6.29.owrt/drivers/rtc/rtc-dm355evm.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/rtc-dm355evm.c   1970-01-01 01:00:00.000000000 +0100
+@@ -1,175 +0,0 @@
+-/*
+- * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+- *
+- * Copyright (c) 2008 by David Brownell
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License
+- * as published by the Free Software Foundation; either version
+- * 2 of the License, or (at your option) any later version.
+- */
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/rtc.h>
+-#include <linux/platform_device.h>
+-
+-#include <linux/i2c/dm355evm_msp.h>
+-
+-
+-/*
+- * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+- * a 1 Hz counter.  When a backup battery is supplied, that makes a
+- * reasonable RTC for applications where alarms and non-NTP drift
+- * compensation aren't important.
+- *
+- * The only real glitch is the inability to read or write all four
+- * counter bytes atomically:  the count may increment in the middle
+- * of an operation, causing trouble when the LSB rolls over.
+- *
+- * This driver was tested with firmware revision A4.
+- */
+-union evm_time {
+-      u8      bytes[4];
+-      u32     value;
+-};
+-
+-static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+-{
+-      union evm_time  time;
+-      int             status;
+-      int             tries = 0;
+-
+-      do {
+-              /*
+-               * Read LSB(0) to MSB(3) bytes.  Defend against the counter
+-               * rolling over by re-reading until the value is stable,
+-               * and assuming the four reads take at most a few seconds.
+-               */
+-              status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+-              if (status < 0)
+-                      return status;
+-              if (tries && time.bytes[0] == status)
+-                      break;
+-              time.bytes[0] = status;
+-
+-              status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+-              if (status < 0)
+-                      return status;
+-              if (tries && time.bytes[1] == status)
+-                      break;
+-              time.bytes[1] = status;
+-
+-              status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+-              if (status < 0)
+-                      return status;
+-              if (tries && time.bytes[2] == status)
+-                      break;
+-              time.bytes[2] = status;
+-
+-              status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+-              if (status < 0)
+-                      return status;
+-              if (tries && time.bytes[3] == status)
+-                      break;
+-              time.bytes[3] = status;
+-
+-      } while (++tries < 5);
+-
+-      dev_dbg(dev, "read timestamp %08x\n", time.value);
+-
+-      rtc_time_to_tm(le32_to_cpu(time.value), tm);
+-      return 0;
+-}
+-
+-static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+-{
+-      union evm_time  time;
+-      unsigned long   value;
+-      int             status;
+-
+-      rtc_tm_to_time(tm, &value);
+-      time.value = cpu_to_le32(value);
+-
+-      dev_dbg(dev, "write timestamp %08x\n", time.value);
+-
+-      /*
+-       * REVISIT handle non-atomic writes ... maybe just retry until
+-       * byte[1] sticks (no rollover)?
+-       */
+-      status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+-      if (status < 0)
+-              return status;
+-
+-      status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+-      if (status < 0)
+-              return status;
+-
+-      status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+-      if (status < 0)
+-              return status;
+-
+-      status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+-      if (status < 0)
+-              return status;
+-
+-      return 0;
+-}
+-
+-static struct rtc_class_ops dm355evm_rtc_ops = {
+-      .read_time      = dm355evm_rtc_read_time,
+-      .set_time       = dm355evm_rtc_set_time,
+-};
+-
+-/*----------------------------------------------------------------------*/
+-
+-static int __devinit dm355evm_rtc_probe(struct platform_device *pdev)
+-{
+-      struct rtc_device *rtc;
+-
+-      rtc = rtc_device_register(pdev->name,
+-                                &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE);
+-      if (IS_ERR(rtc)) {
+-              dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+-                      PTR_ERR(rtc));
+-              return PTR_ERR(rtc);
+-      }
+-      platform_set_drvdata(pdev, rtc);
+-
+-      return 0;
+-}
+-
+-static int __devexit dm355evm_rtc_remove(struct platform_device *pdev)
+-{
+-      struct rtc_device *rtc = platform_get_drvdata(pdev);
+-
+-      rtc_device_unregister(rtc);
+-      platform_set_drvdata(pdev, NULL);
+-      return 0;
+-}
+-
+-/*
+- * I2C is used to talk to the MSP430, but this platform device is
+- * exposed by an MFD driver that manages I2C communications.
+- */
+-static struct platform_driver rtc_dm355evm_driver = {
+-      .probe          = dm355evm_rtc_probe,
+-      .remove         = __devexit_p(dm355evm_rtc_remove),
+-      .driver         = {
+-              .owner  = THIS_MODULE,
+-              .name   = "rtc-dm355evm",
+-      },
+-};
+-
+-static int __init dm355evm_rtc_init(void)
+-{
+-      return platform_driver_register(&rtc_dm355evm_driver);
+-}
+-module_init(dm355evm_rtc_init);
+-
+-static void __exit dm355evm_rtc_exit(void)
+-{
+-      platform_driver_unregister(&rtc_dm355evm_driver);
+-}
+-module_exit(dm355evm_rtc_exit);
+-
+-MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/rtc-ds1390.c linux-2.6.29-rc3.owrt/drivers/rtc/rtc-ds1390.c
+--- linux-2.6.29.owrt/drivers/rtc/rtc-ds1390.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/rtc-ds1390.c     2009-05-10 23:48:29.000000000 +0200
+@@ -122,6 +122,7 @@
+ static int __devinit ds1390_probe(struct spi_device *spi)
+ {
++      struct rtc_device *rtc;
+       unsigned char tmp;
+       struct ds1390 *chip;
+       int res;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/rtc/rtc-pxa.c linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pxa.c
+--- linux-2.6.29.owrt/drivers/rtc/rtc-pxa.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pxa.c        2009-05-10 23:48:29.000000000 +0200
+@@ -485,7 +485,7 @@
+ module_init(pxa_rtc_init);
+ module_exit(pxa_rtc_exit);
+-MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
++MODULE_AUTHOR("Robert Jarzmik");
+ MODULE_DESCRIPTION("PXA27x/PXA3xx Realtime Clock Driver (RTC)");
+ MODULE_LICENSE("GPL");
+ MODULE_ALIAS("platform:pxa-rtc");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/s390/block/dasd.c linux-2.6.29-rc3.owrt/drivers/s390/block/dasd.c
+--- linux-2.6.29.owrt/drivers/s390/block/dasd.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/s390/block/dasd.c    2009-05-10 23:48:29.000000000 +0200
+@@ -57,8 +57,6 @@
+ static void dasd_block_tasklet(struct dasd_block *);
+ static void do_kick_device(struct work_struct *);
+ static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *);
+-static void dasd_device_timeout(unsigned long);
+-static void dasd_block_timeout(unsigned long);
+ /*
+  * SECTION: Operations on the device structure.
+@@ -101,8 +99,6 @@
+                    (unsigned long) device);
+       INIT_LIST_HEAD(&device->ccw_queue);
+       init_timer(&device->timer);
+-      device->timer.function = dasd_device_timeout;
+-      device->timer.data = (unsigned long) device;
+       INIT_WORK(&device->kick_work, do_kick_device);
+       device->state = DASD_STATE_NEW;
+       device->target = DASD_STATE_NEW;
+@@ -142,8 +138,6 @@
+       INIT_LIST_HEAD(&block->ccw_queue);
+       spin_lock_init(&block->queue_lock);
+       init_timer(&block->timer);
+-      block->timer.function = dasd_block_timeout;
+-      block->timer.data = (unsigned long) block;
+       return block;
+ }
+@@ -921,10 +915,19 @@
+  */
+ void dasd_device_set_timer(struct dasd_device *device, int expires)
+ {
+-      if (expires == 0)
+-              del_timer(&device->timer);
+-      else
+-              mod_timer(&device->timer, jiffies + expires);
++      if (expires == 0) {
++              if (timer_pending(&device->timer))
++                      del_timer(&device->timer);
++              return;
++      }
++      if (timer_pending(&device->timer)) {
++              if (mod_timer(&device->timer, jiffies + expires))
++                      return;
++      }
++      device->timer.function = dasd_device_timeout;
++      device->timer.data = (unsigned long) device;
++      device->timer.expires = jiffies + expires;
++      add_timer(&device->timer);
+ }
+ /*
+@@ -932,7 +935,8 @@
+  */
+ void dasd_device_clear_timer(struct dasd_device *device)
+ {
+-      del_timer(&device->timer);
++      if (timer_pending(&device->timer))
++              del_timer(&device->timer);
+ }
+ static void dasd_handle_killed_request(struct ccw_device *cdev,
+@@ -1582,10 +1586,19 @@
+  */
+ void dasd_block_set_timer(struct dasd_block *block, int expires)
+ {
+-      if (expires == 0)
+-              del_timer(&block->timer);
+-      else
+-              mod_timer(&block->timer, jiffies + expires);
++      if (expires == 0) {
++              if (timer_pending(&block->timer))
++                      del_timer(&block->timer);
++              return;
++      }
++      if (timer_pending(&block->timer)) {
++              if (mod_timer(&block->timer, jiffies + expires))
++                      return;
++      }
++      block->timer.function = dasd_block_timeout;
++      block->timer.data = (unsigned long) block;
++      block->timer.expires = jiffies + expires;
++      add_timer(&block->timer);
+ }
+ /*
+@@ -1593,7 +1606,8 @@
+  */
+ void dasd_block_clear_timer(struct dasd_block *block)
+ {
+-      del_timer(&block->timer);
++      if (timer_pending(&block->timer))
++              del_timer(&block->timer);
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/s390/block/dasd_devmap.c linux-2.6.29-rc3.owrt/drivers/s390/block/dasd_devmap.c
+--- linux-2.6.29.owrt/drivers/s390/block/dasd_devmap.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/s390/block/dasd_devmap.c     2009-05-10 23:48:29.000000000 +0200
+@@ -677,7 +677,7 @@
+       struct dasd_devmap *devmap;
+       int ff_flag;
+-      devmap = dasd_find_busid(dev_name(dev));
++      devmap = dasd_find_busid(dev->bus_id);
+       if (!IS_ERR(devmap))
+               ff_flag = (devmap->features & DASD_FEATURE_FAILFAST) != 0;
+       else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/s390/char/sclp.c linux-2.6.29-rc3.owrt/drivers/s390/char/sclp.c
+--- linux-2.6.29.owrt/drivers/s390/char/sclp.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/s390/char/sclp.c     2009-05-10 23:48:29.000000000 +0200
+@@ -280,11 +280,8 @@
+       rc = 0;
+       for (offset = sizeof(struct sccb_header); offset < sccb->length;
+            offset += evbuf->length) {
+-              evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+-              /* Check for malformed hardware response */
+-              if (evbuf->length == 0)
+-                      break;
+               /* Search for event handler */
++              evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+               reg = NULL;
+               list_for_each(l, &sclp_reg_list) {
+                       reg = list_entry(l, struct sclp_register, list);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/s390/char/sclp_cmd.c linux-2.6.29-rc3.owrt/drivers/s390/char/sclp_cmd.c
+--- linux-2.6.29.owrt/drivers/s390/char/sclp_cmd.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/s390/char/sclp_cmd.c 2009-05-10 23:48:29.000000000 +0200
+@@ -19,7 +19,6 @@
+ #include <linux/memory.h>
+ #include <asm/chpid.h>
+ #include <asm/sclp.h>
+-#include <asm/setup.h>
+ #include "sclp.h"
+@@ -475,10 +474,6 @@
+               goto skip_add;
+       if (start + size > VMEM_MAX_PHYS)
+               size = VMEM_MAX_PHYS - start;
+-      if (memory_end_set && (start >= memory_end))
+-              goto skip_add;
+-      if (memory_end_set && (start + size > memory_end))
+-              size = memory_end - start;
+       add_memory(0, start, size);
+ skip_add:
+       first_rn = rn;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/sbus/char/bbc_i2c.c linux-2.6.29-rc3.owrt/drivers/sbus/char/bbc_i2c.c
+--- linux-2.6.29.owrt/drivers/sbus/char/bbc_i2c.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/sbus/char/bbc_i2c.c  2009-05-10 23:48:29.000000000 +0200
+@@ -129,7 +129,7 @@
+       bp->waiting = 1;
+       add_wait_queue(&bp->wq, &wait);
+       while (limit-- > 0) {
+-              long val;
++              unsigned long val;
+               val = wait_event_interruptible_timeout(
+                               bp->wq,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/sbus/char/jsflash.c linux-2.6.29-rc3.owrt/drivers/sbus/char/jsflash.c
+--- linux-2.6.29.owrt/drivers/sbus/char/jsflash.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/sbus/char/jsflash.c  2009-05-10 23:48:29.000000000 +0200
+@@ -38,6 +38,9 @@
+ #include <linux/string.h>
+ #include <linux/genhd.h>
+ #include <linux/blkdev.h>
++
++#define MAJOR_NR      JSFD_MAJOR
++
+ #include <asm/uaccess.h>
+ #include <asm/pgtable.h>
+ #include <asm/io.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/sbus/char/openprom.c linux-2.6.29-rc3.owrt/drivers/sbus/char/openprom.c
+--- linux-2.6.29.owrt/drivers/sbus/char/openprom.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/sbus/char/openprom.c 2009-05-10 23:48:29.000000000 +0200
+@@ -51,7 +51,6 @@
+ MODULE_DESCRIPTION("OPENPROM Configuration Driver");
+ MODULE_LICENSE("GPL");
+ MODULE_VERSION("1.0");
+-MODULE_ALIAS_MISCDEV(SUN_OPENPROM_MINOR);
+ /* Private data kept by the driver for each descriptor. */
+ typedef struct openprom_private_data
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.c linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.c     2009-05-10 23:48:29.000000000 +0200
+@@ -639,11 +639,10 @@
+       write_unlock(&cxgb3i_ddp_rwlock);
+       ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
+-                      "pkt %u/%u, %u/%u.\n",
++                      "pkt %u,%u.\n",
+                       ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
+                       ddp->idx_mask, ddp->rsvd_tag_mask,
+-                      ddp->max_txsz, uinfo.max_txsz,
+-                      ddp->max_rxsz, uinfo.max_rxsz);
++                      ddp->max_txsz, ddp->max_rxsz);
+       return 0;
+ free_ddp_map:
+@@ -655,8 +654,8 @@
+  * cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
+  * @tdev: t3cdev adapter
+  * @tformat: tag format
+- * @txsz: max tx pdu payload size, filled in by this func.
+- * @rxsz: max rx pdu payload size, filled in by this func.
++ * @txsz: max tx pkt size, filled in by this func.
++ * @rxsz: max rx pkt size, filled in by this func.
+  * initialize the ddp pagepod manager for a given adapter if needed and
+  * setup the tag format for a given iscsi entity
+  */
+@@ -686,12 +685,10 @@
+                     tformat->sw_bits, tformat->rsvd_bits,
+                     tformat->rsvd_shift, tformat->rsvd_mask);
+-      *txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+-                      ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+-      *rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+-                      ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+-      ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+-                   *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
++      *txsz = ddp->max_txsz;
++      *rxsz = ddp->max_rxsz;
++      ddp_log_info("ddp max pkt size: %u, %u.\n",
++                   ddp->max_txsz, ddp->max_rxsz);
+       return 0;
+ }
+ EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.h linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.h
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_ddp.h     2009-05-10 23:48:29.000000000 +0200
+@@ -13,8 +13,6 @@
+ #ifndef __CXGB3I_ULP2_DDP_H__
+ #define __CXGB3I_ULP2_DDP_H__
+-#include <linux/vmalloc.h>
+-
+ /**
+  * struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
+  *
+@@ -87,9 +85,8 @@
+       struct sk_buff **gl_skb;
+ };
+-#define ISCSI_PDU_NONPAYLOAD_LEN      312 /* bhs(48) + ahs(256) + digest(8) */
+ #define ULP2_MAX_PKT_SIZE     16224
+-#define ULP2_MAX_PDU_PAYLOAD  (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
++#define ULP2_MAX_PDU_PAYLOAD  (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+ #define PPOD_PAGES_MAX                4
+ #define PPOD_PAGES_SHIFT      2       /* 4 pages per pod */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i.h linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i.h
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i.h 2009-05-10 23:48:29.000000000 +0200
+@@ -20,7 +20,6 @@
+ #include <linux/list.h>
+ #include <linux/netdevice.h>
+ #include <linux/scatterlist.h>
+-#include <linux/skbuff.h>
+ #include <scsi/libiscsi_tcp.h>
+ /* from cxgb3 LLD */
+@@ -114,26 +113,6 @@
+       struct cxgb3i_conn *cconn;
+ };
+-/**
+- * struct cxgb3i_task_data - private iscsi task data
+- *
+- * @nr_frags: # of coalesced page frags (from scsi sgl)
+- * @frags:    coalesced page frags (from scsi sgl)
+- * @skb:      tx pdu skb
+- * @offset:   data offset for the next pdu
+- * @count:    max. possible pdu payload
+- * @sgoffset: offset to the first sg entry for a given offset
+- */
+-#define MAX_PDU_FRAGS ((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+-struct cxgb3i_task_data {
+-      unsigned short nr_frags;
+-      skb_frag_t frags[MAX_PDU_FRAGS];
+-      struct sk_buff *skb;
+-      unsigned int offset;
+-      unsigned int count;
+-      unsigned int sgoffset;
+-};
+-
+ int cxgb3i_iscsi_init(void);
+ void cxgb3i_iscsi_cleanup(void);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_init.c linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_init.c
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_init.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_init.c    2009-05-10 23:48:29.000000000 +0200
+@@ -12,8 +12,8 @@
+ #include "cxgb3i.h"
+ #define DRV_MODULE_NAME         "cxgb3i"
+-#define DRV_MODULE_VERSION    "1.0.1"
+-#define DRV_MODULE_RELDATE    "Jan. 2009"
++#define DRV_MODULE_VERSION    "1.0.0"
++#define DRV_MODULE_RELDATE    "Jun. 1, 2008"
+ static char version[] =
+       "Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_iscsi.c linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_iscsi.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_iscsi.c   2009-05-10 23:48:29.000000000 +0200
+@@ -364,8 +364,7 @@
+       cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
+                                         cmds_max,
+-                                        sizeof(struct iscsi_tcp_task) +
+-                                        sizeof(struct cxgb3i_task_data),
++                                        sizeof(struct iscsi_tcp_task),
+                                         initial_cmdsn, ISCSI_MAX_TARGET);
+       if (!cls_session)
+               return NULL;
+@@ -403,15 +402,17 @@
+ {
+       struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+       struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+-      unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
++      unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
++                               cconn->hba->snic->tx_max_size -
++                               ISCSI_PDU_NONPAYLOAD_MAX);
+-      max = min(cconn->hba->snic->tx_max_size, max);
+       if (conn->max_xmit_dlength)
+-              conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
++              conn->max_xmit_dlength = min_t(unsigned int,
++                                              conn->max_xmit_dlength, max);
+       else
+               conn->max_xmit_dlength = max;
+       align_pdu_size(conn->max_xmit_dlength);
+-      cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
++      cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+                        conn, conn->max_xmit_dlength);
+       return 0;
+ }
+@@ -426,7 +427,9 @@
+ {
+       struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+       struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+-      unsigned int max = cconn->hba->snic->rx_max_size;
++      unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
++                               cconn->hba->snic->rx_max_size -
++                               ISCSI_PDU_NONPAYLOAD_MAX);
+       align_pdu_size(max);
+       if (conn->max_recv_dlength) {
+@@ -436,7 +439,8 @@
+                                        conn->max_recv_dlength, max);
+                       return -EINVAL;
+               }
+-              conn->max_recv_dlength = min(conn->max_recv_dlength, max);
++              conn->max_recv_dlength = min_t(unsigned int,
++                                              conn->max_recv_dlength, max);
+               align_pdu_size(conn->max_recv_dlength);
+       } else
+               conn->max_recv_dlength = max;
+@@ -840,7 +844,7 @@
+       .proc_name              = "cxgb3i",
+       .queuecommand           = iscsi_queuecommand,
+       .change_queue_depth     = iscsi_change_queue_depth,
+-      .can_queue              = CXGB3I_SCSI_QDEPTH_DFLT - 1,
++      .can_queue              = 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+       .sg_tablesize           = SG_ALL,
+       .max_sectors            = 0xFFFF,
+       .cmd_per_lun            = ISCSI_DEF_CMD_PER_LUN,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.c linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.c
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.c 2009-05-10 23:48:29.000000000 +0200
+@@ -23,19 +23,19 @@
+ #include "cxgb3i_ddp.h"
+ #ifdef __DEBUG_C3CN_CONN__
+-#define c3cn_conn_debug               cxgb3i_log_debug
++#define c3cn_conn_debug         cxgb3i_log_info
+ #else
+ #define c3cn_conn_debug(fmt...)
+ #endif
+ #ifdef __DEBUG_C3CN_TX__
+-#define c3cn_tx_debug         cxgb3i_log_debug
++#define c3cn_tx_debug         cxgb3i_log_debug
+ #else
+ #define c3cn_tx_debug(fmt...)
+ #endif
+ #ifdef __DEBUG_C3CN_RX__
+-#define c3cn_rx_debug         cxgb3i_log_debug
++#define c3cn_rx_debug         cxgb3i_log_debug
+ #else
+ #define c3cn_rx_debug(fmt...)
+ #endif
+@@ -47,9 +47,9 @@
+ module_param(cxgb3_rcv_win, int, 0644);
+ MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)");
+-static int cxgb3_snd_win = 128 * 1024;
++static int cxgb3_snd_win = 64 * 1024;
+ module_param(cxgb3_snd_win, int, 0644);
+-MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)");
++MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)");
+ static int cxgb3_rx_credit_thres = 10 * 1024;
+ module_param(cxgb3_rx_credit_thres, int, 0644);
+@@ -301,8 +301,8 @@
+ static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb,
+                      int flags)
+ {
+-      skb_tcp_seq(skb) = c3cn->write_seq;
+-      skb_flags(skb) = flags;
++      CXGB3_SKB_CB(skb)->seq = c3cn->write_seq;
++      CXGB3_SKB_CB(skb)->flags = flags;
+       __skb_queue_tail(&c3cn->write_queue, skb);
+ }
+@@ -457,9 +457,12 @@
+  * The number of WRs needed for an skb depends on the number of fragments
+  * in the skb and whether it has any payload in its main body.  This maps the
+  * length of the gather list represented by an skb into the # of necessary WRs.
+- * The extra two fragments are for iscsi bhs and payload padding.
++ *
++ * The max. length of an skb is controlled by the max pdu size which is ~16K.
++ * Also, assume the min. fragment length is the sector size (512), then add
++ * extra fragment counts for iscsi bhs and payload padding.
+  */
+-#define SKB_WR_LIST_SIZE      (MAX_SKB_FRAGS + 2)
++#define SKB_WR_LIST_SIZE      (16384/512 + 3)
+ static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly;
+ static void s3_init_wr_tab(unsigned int wr_len)
+@@ -482,7 +485,7 @@
+ static inline void reset_wr_list(struct s3_conn *c3cn)
+ {
+-      c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL;
++      c3cn->wr_pending_head = NULL;
+ }
+ /*
+@@ -493,7 +496,7 @@
+ static inline void enqueue_wr(struct s3_conn *c3cn,
+                             struct sk_buff *skb)
+ {
+-      skb_tx_wr_next(skb) = NULL;
++      skb_wr_data(skb) = NULL;
+       /*
+        * We want to take an extra reference since both us and the driver
+@@ -506,22 +509,10 @@
+       if (!c3cn->wr_pending_head)
+               c3cn->wr_pending_head = skb;
+       else
+-              skb_tx_wr_next(c3cn->wr_pending_tail) = skb;
++              skb_wr_data(skb) = skb;
+       c3cn->wr_pending_tail = skb;
+ }
+-static int count_pending_wrs(struct s3_conn *c3cn)
+-{
+-      int n = 0;
+-      const struct sk_buff *skb = c3cn->wr_pending_head;
+-
+-      while (skb) {
+-              n += skb->csum;
+-              skb = skb_tx_wr_next(skb);
+-      }
+-      return n;
+-}
+-
+ static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn)
+ {
+       return c3cn->wr_pending_head;
+@@ -538,8 +529,8 @@
+       if (likely(skb)) {
+               /* Don't bother clearing the tail */
+-              c3cn->wr_pending_head = skb_tx_wr_next(skb);
+-              skb_tx_wr_next(skb) = NULL;
++              c3cn->wr_pending_head = skb_wr_data(skb);
++              skb_wr_data(skb) = NULL;
+       }
+       return skb;
+ }
+@@ -552,14 +543,13 @@
+ }
+ static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb,
+-                                 int len, int req_completion)
++                                 int len)
+ {
+       struct tx_data_wr *req;
+       skb_reset_transport_header(skb);
+       req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req));
+-      req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) |
+-                      (req_completion ? F_WR_COMPL : 0));
++      req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA));
+       req->wr_lo = htonl(V_WR_TID(c3cn->tid));
+       req->sndseq = htonl(c3cn->snd_nxt);
+       /* len includes the length of any HW ULP additions */
+@@ -602,7 +592,7 @@
+       if (unlikely(c3cn->state == C3CN_STATE_CONNECTING ||
+                    c3cn->state == C3CN_STATE_CLOSE_WAIT_1 ||
+-                   c3cn->state >= C3CN_STATE_ABORTING)) {
++                   c3cn->state == C3CN_STATE_ABORTING)) {
+               c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n",
+                             c3cn, c3cn->state);
+               return 0;
+@@ -625,7 +615,7 @@
+               if (c3cn->wr_avail < wrs_needed) {
+                       c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, "
+                                     "wr %d < %u.\n",
+-                                    c3cn, skb->len, skb->data_len, frags,
++                                    c3cn, skb->len, skb->datalen, frags,
+                                     wrs_needed, c3cn->wr_avail);
+                       break;
+               }
+@@ -637,24 +627,20 @@
+               c3cn->wr_unacked += wrs_needed;
+               enqueue_wr(c3cn, skb);
+-              c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, "
+-                              "wr %d, left %u, unack %u.\n",
+-                              c3cn, skb->len, skb->data_len, frags,
+-                              wrs_needed, c3cn->wr_avail, c3cn->wr_unacked);
+-
++              if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) {
++                      len += ulp_extra_len(skb);
++                      make_tx_data_wr(c3cn, skb, len);
++                      c3cn->snd_nxt += len;
++                      if ((req_completion
++                           && c3cn->wr_unacked == wrs_needed)
++                          || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL)
++                          || c3cn->wr_unacked >= c3cn->wr_max / 2) {
++                              struct work_request_hdr *wr = cplhdr(skb);
+-              if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) {
+-                      if ((req_completion &&
+-                              c3cn->wr_unacked == wrs_needed) ||
+-                          (skb_flags(skb) & C3CB_FLAG_COMPL) ||
+-                          c3cn->wr_unacked >= c3cn->wr_max / 2) {
+-                              req_completion = 1;
++                              wr->wr_hi |= htonl(F_WR_COMPL);
+                               c3cn->wr_unacked = 0;
+                       }
+-                      len += ulp_extra_len(skb);
+-                      make_tx_data_wr(c3cn, skb, len, req_completion);
+-                      c3cn->snd_nxt += len;
+-                      skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR;
++                      CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR;
+               }
+               total_size += skb->truesize;
+@@ -749,11 +735,8 @@
+       if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED)))
+               /* upper layer has requested closing */
+               send_abort_req(c3cn);
+-      else {
+-              if (skb_queue_len(&c3cn->write_queue))
+-                      c3cn_push_tx_frames(c3cn, 1);
++      else if (c3cn_push_tx_frames(c3cn, 1))
+               cxgb3i_conn_tx_open(c3cn);
+-      }
+ }
+ static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb,
+@@ -1099,8 +1082,8 @@
+               return;
+       }
+-      skb_tcp_seq(skb) = ntohl(hdr_cpl->seq);
+-      skb_flags(skb) = 0;
++      CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq);
++      CXGB3_SKB_CB(skb)->flags = 0;
+       skb_reset_transport_header(skb);
+       __skb_pull(skb, sizeof(struct cpl_iscsi_hdr));
+@@ -1120,12 +1103,12 @@
+               goto abort_conn;
+       skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY;
+-      skb_rx_pdulen(skb) = ntohs(ddp_cpl.len);
+-      skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
++      skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len);
++      skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
+       status = ntohl(ddp_cpl.ddp_status);
+       c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n",
+-                    skb, skb->len, skb_rx_pdulen(skb), status);
++                    skb, skb->len, skb_ulp_pdulen(skb), status);
+       if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT))
+               skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR;
+@@ -1143,7 +1126,7 @@
+       } else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT))
+               skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED;
+-      c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb);
++      c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb);
+       __pskb_trim(skb, len);
+       __skb_queue_tail(&c3cn->receive_queue, skb);
+       cxgb3i_conn_pdu_ready(c3cn);
+@@ -1168,27 +1151,12 @@
+  * Process an acknowledgment of WR completion.  Advance snd_una and send the
+  * next batch of work requests from the write queue.
+  */
+-static void check_wr_invariants(struct s3_conn *c3cn)
+-{
+-      int pending = count_pending_wrs(c3cn);
+-
+-      if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max))
+-              cxgb3i_log_error("TID %u: credit imbalance: avail %u, "
+-                              "pending %u, total should be %u\n",
+-                              c3cn->tid, c3cn->wr_avail, pending,
+-                              c3cn->wr_max);
+-}
+-
+ static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb)
+ {
+       struct cpl_wr_ack *hdr = cplhdr(skb);
+       unsigned int credits = ntohs(hdr->credits);
+       u32 snd_una = ntohl(hdr->snd_una);
+-      c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n",
+-                      credits, c3cn->wr_avail, c3cn->wr_unacked,
+-                      c3cn->tid, c3cn->state);
+-
+       c3cn->wr_avail += credits;
+       if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail)
+               c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail;
+@@ -1203,17 +1171,6 @@
+                       break;
+               }
+               if (unlikely(credits < p->csum)) {
+-                      struct tx_data_wr *w = cplhdr(p);
+-                      cxgb3i_log_error("TID %u got %u WR credits need %u, "
+-                                       "len %u, main body %u, frags %u, "
+-                                       "seq # %u, ACK una %u, ACK nxt %u, "
+-                                       "WR_AVAIL %u, WRs pending %u\n",
+-                                       c3cn->tid, credits, p->csum, p->len,
+-                                       p->len - p->data_len,
+-                                       skb_shinfo(p)->nr_frags,
+-                                       ntohl(w->sndseq), snd_una,
+-                                       ntohl(hdr->snd_nxt), c3cn->wr_avail,
+-                                       count_pending_wrs(c3cn) - credits);
+                       p->csum -= credits;
+                       break;
+               } else {
+@@ -1223,24 +1180,15 @@
+               }
+       }
+-      check_wr_invariants(c3cn);
+-
+-      if (unlikely(before(snd_una, c3cn->snd_una))) {
+-              cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK "
+-                               "snd_una %u\n",
+-                               c3cn->tid, snd_una, c3cn->snd_una);
++      if (unlikely(before(snd_una, c3cn->snd_una)))
+               goto out_free;
+-      }
+       if (c3cn->snd_una != snd_una) {
+               c3cn->snd_una = snd_una;
+               dst_confirm(c3cn->dst_cache);
+       }
+-      if (skb_queue_len(&c3cn->write_queue)) {
+-              if (c3cn_push_tx_frames(c3cn, 0))
+-                      cxgb3i_conn_tx_open(c3cn);
+-      } else
++      if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0))
+               cxgb3i_conn_tx_open(c3cn);
+ out_free:
+       __kfree_skb(skb);
+@@ -1504,7 +1452,7 @@
+                             struct dst_entry *dst)
+ {
+       BUG_ON(c3cn->cdev != cdev);
+-      c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1;
++      c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs;
+       c3cn->wr_unacked = 0;
+       c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst));
+@@ -1723,17 +1671,9 @@
+               goto out_err;
+       }
++      err = -EPIPE;
+       if (c3cn->err) {
+               c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err);
+-              err = -EPIPE;
+-              goto out_err;
+-      }
+-
+-      if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) {
+-              c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
+-                              c3cn, c3cn->write_seq, c3cn->snd_una,
+-                              cxgb3_snd_win);
+-              err = -EAGAIN;
+               goto out_err;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.h linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.h
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_offload.h 2009-05-10 23:48:29.000000000 +0200
+@@ -178,33 +178,25 @@
+  * @flag:     see C3CB_FLAG_* below
+  * @ulp_mode: ULP mode/submode of sk_buff
+  * @seq:      tcp sequence number
++ * @ddigest:  pdu data digest
++ * @pdulen:   recovered pdu length
++ * @wr_data:  scratch area for tx wr
+  */
+-struct cxgb3_skb_rx_cb {
+-      __u32 ddigest;                  /* data digest */
+-      __u32 pdulen;                   /* recovered pdu length */
+-};
+-
+-struct cxgb3_skb_tx_cb {
+-      struct sk_buff *wr_next;        /* next wr */
+-};
+-
+ struct cxgb3_skb_cb {
+       __u8 flags;
+       __u8 ulp_mode;
+       __u32 seq;
+-      union {
+-              struct cxgb3_skb_rx_cb rx;
+-              struct cxgb3_skb_tx_cb tx;
+-      };
++      __u32 ddigest;
++      __u32 pdulen;
++      struct sk_buff *wr_data;
+ };
+ #define CXGB3_SKB_CB(skb)     ((struct cxgb3_skb_cb *)&((skb)->cb[0]))
+-#define skb_flags(skb)                (CXGB3_SKB_CB(skb)->flags)
++
+ #define skb_ulp_mode(skb)     (CXGB3_SKB_CB(skb)->ulp_mode)
+-#define skb_tcp_seq(skb)      (CXGB3_SKB_CB(skb)->seq)
+-#define skb_rx_ddigest(skb)   (CXGB3_SKB_CB(skb)->rx.ddigest)
+-#define skb_rx_pdulen(skb)    (CXGB3_SKB_CB(skb)->rx.pdulen)
+-#define skb_tx_wr_next(skb)   (CXGB3_SKB_CB(skb)->tx.wr_next)
++#define skb_ulp_ddigest(skb)  (CXGB3_SKB_CB(skb)->ddigest)
++#define skb_ulp_pdulen(skb)   (CXGB3_SKB_CB(skb)->pdulen)
++#define skb_wr_data(skb)      (CXGB3_SKB_CB(skb)->wr_data)
+ enum c3cb_flags {
+       C3CB_FLAG_NEED_HDR = 1 << 0,    /* packet needs a TX_DATA_WR header */
+@@ -225,7 +217,6 @@
+ /* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
+ #define TX_HEADER_LEN \
+               (sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+-#define SKB_TX_HEADROOM               SKB_MAX_HEAD(TX_HEADER_LEN)
+ /*
+  * get and set private ip for iscsi traffic
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.c linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.c     2009-05-10 23:48:29.000000000 +0200
+@@ -32,10 +32,6 @@
+ #define cxgb3i_tx_debug(fmt...)
+ #endif
+-/* always allocate rooms for AHS */
+-#define SKB_TX_PDU_HEADER_LEN \
+-      (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE)
+-static unsigned int skb_extra_headroom;
+ static struct page *pad_page;
+ /*
+@@ -150,13 +146,12 @@
+ void cxgb3i_conn_cleanup_task(struct iscsi_task *task)
+ {
+-      struct cxgb3i_task_data *tdata = task->dd_data +
+-                                      sizeof(struct iscsi_tcp_task);
++      struct iscsi_tcp_task *tcp_task = task->dd_data;
+       /* never reached the xmit task callout */
+-      if (tdata->skb)
+-              __kfree_skb(tdata->skb);
+-      memset(tdata, 0, sizeof(struct cxgb3i_task_data));
++      if (tcp_task->dd_data)
++              kfree_skb(tcp_task->dd_data);
++      tcp_task->dd_data = NULL;
+       /* MNC - Do we need a check in case this is called but
+        * cxgb3i_conn_alloc_pdu has never been called on the task */
+@@ -164,102 +159,28 @@
+       iscsi_tcp_cleanup_task(task);
+ }
+-static int sgl_seek_offset(struct scatterlist *sgl, unsigned int sgcnt,
+-                              unsigned int offset, unsigned int *off,
+-                              struct scatterlist **sgp)
+-{
+-      int i;
+-      struct scatterlist *sg;
+-
+-      for_each_sg(sgl, sg, sgcnt, i) {
+-              if (offset < sg->length) {
+-                      *off = offset;
+-                      *sgp = sg;
+-                      return 0;
+-              }
+-              offset -= sg->length;
+-      }
+-      return -EFAULT;
+-}
+-
+-static int sgl_read_to_frags(struct scatterlist *sg, unsigned int sgoffset,
+-                              unsigned int dlen, skb_frag_t *frags,
+-                              int frag_max)
+-{
+-      unsigned int datalen = dlen;
+-      unsigned int sglen = sg->length - sgoffset;
+-      struct page *page = sg_page(sg);
+-      int i;
+-
+-      i = 0;
+-      do {
+-              unsigned int copy;
+-
+-              if (!sglen) {
+-                      sg = sg_next(sg);
+-                      if (!sg) {
+-                              cxgb3i_log_error("%s, sg NULL, len %u/%u.\n",
+-                                               __func__, datalen, dlen);
+-                              return -EINVAL;
+-                      }
+-                      sgoffset = 0;
+-                      sglen = sg->length;
+-                      page = sg_page(sg);
+-
+-              }
+-              copy = min(datalen, sglen);
+-              if (i && page == frags[i - 1].page &&
+-                  sgoffset + sg->offset ==
+-                      frags[i - 1].page_offset + frags[i - 1].size) {
+-                      frags[i - 1].size += copy;
+-              } else {
+-                      if (i >= frag_max) {
+-                              cxgb3i_log_error("%s, too many pages %u, "
+-                                               "dlen %u.\n", __func__,
+-                                               frag_max, dlen);
+-                              return -EINVAL;
+-                      }
+-
+-                      frags[i].page = page;
+-                      frags[i].page_offset = sg->offset + sgoffset;
+-                      frags[i].size = copy;
+-                      i++;
+-              }
+-              datalen -= copy;
+-              sgoffset += copy;
+-              sglen -= copy;
+-      } while (datalen);
+-
+-      return i;
+-}
+-
++/*
++ * We do not support ahs yet
++ */
+ int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
+ {
+-      struct iscsi_conn *conn = task->conn;
+       struct iscsi_tcp_task *tcp_task = task->dd_data;
+-      struct cxgb3i_task_data *tdata = task->dd_data + sizeof(*tcp_task);
+-      struct scsi_cmnd *sc = task->sc;
+-      int headroom = SKB_TX_PDU_HEADER_LEN;
++      struct sk_buff *skb;
+-      tcp_task->dd_data = tdata;
+       task->hdr = NULL;
+-
+-      /* write command, need to send data pdus */
+-      if (skb_extra_headroom && (opcode == ISCSI_OP_SCSI_DATA_OUT ||
+-          (opcode == ISCSI_OP_SCSI_CMD &&
+-          (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_TO_DEVICE))))
+-              headroom += min(skb_extra_headroom, conn->max_xmit_dlength);
+-
+-      tdata->skb = alloc_skb(TX_HEADER_LEN + headroom, GFP_ATOMIC);
+-      if (!tdata->skb)
++      /* always allocate rooms for AHS */
++      skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE +
++                      TX_HEADER_LEN,  GFP_ATOMIC);
++      if (!skb)
+               return -ENOMEM;
+-      skb_reserve(tdata->skb, TX_HEADER_LEN);
+       cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n",
+-                      task, opcode, tdata->skb);
++                      task, opcode, skb);
+-      task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+-      task->hdr_max = SKB_TX_PDU_HEADER_LEN;
++      tcp_task->dd_data = skb;
++      skb_reserve(skb, TX_HEADER_LEN);
++      task->hdr = (struct iscsi_hdr *)skb->data;
++      task->hdr_max = sizeof(struct iscsi_hdr);
+       /* data_out uses scsi_cmd's itt */
+       if (opcode != ISCSI_OP_SCSI_DATA_OUT)
+@@ -271,13 +192,13 @@
+ int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
+                             unsigned int count)
+ {
+-      struct iscsi_conn *conn = task->conn;
+       struct iscsi_tcp_task *tcp_task = task->dd_data;
+-      struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+-      struct sk_buff *skb = tdata->skb;
++      struct sk_buff *skb = tcp_task->dd_data;
++      struct iscsi_conn *conn = task->conn;
++      struct page *pg;
+       unsigned int datalen = count;
+       int i, padlen = iscsi_padding(count);
+-      struct page *pg;
++      skb_frag_t *frag;
+       cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n",
+                       task, task->sc, offset, count, skb);
+@@ -288,94 +209,90 @@
+               return 0;
+       if (task->sc) {
+-              struct scsi_data_buffer *sdb = scsi_out(task->sc);
+-              struct scatterlist *sg = NULL;
+-              int err;
+-
+-              tdata->offset = offset;
+-              tdata->count = count;
+-              err = sgl_seek_offset(sdb->table.sgl, sdb->table.nents,
+-                                      tdata->offset, &tdata->sgoffset, &sg);
+-              if (err < 0) {
+-                      cxgb3i_log_warn("tpdu, sgl %u, bad offset %u/%u.\n",
+-                                      sdb->table.nents, tdata->offset,
+-                                      sdb->length);
+-                      return err;
++              struct scatterlist *sg;
++              struct scsi_data_buffer *sdb;
++              unsigned int sgoffset = offset;
++              struct page *sgpg;
++              unsigned int sglen;
++
++              sdb = scsi_out(task->sc);
++              sg = sdb->table.sgl;
++
++              for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
++                      cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n",
++                                      i, sg_page(sg), sg->length, sg->offset);
++
++                      if (sgoffset < sg->length)
++                              break;
++                      sgoffset -= sg->length;
+               }
+-              err = sgl_read_to_frags(sg, tdata->sgoffset, tdata->count,
+-                                      tdata->frags, MAX_PDU_FRAGS);
+-              if (err < 0) {
+-                      cxgb3i_log_warn("tpdu, sgl %u, bad offset %u + %u.\n",
+-                                      sdb->table.nents, tdata->offset,
+-                                      tdata->count);
+-                      return err;
+-              }
+-              tdata->nr_frags = err;
++              sgpg = sg_page(sg);
++              sglen = sg->length - sgoffset;
+-              if (tdata->nr_frags > MAX_SKB_FRAGS ||
+-                  (padlen && tdata->nr_frags == MAX_SKB_FRAGS)) {
+-                      char *dst = skb->data + task->hdr_len;
+-                      skb_frag_t *frag = tdata->frags;
+-
+-                      /* data fits in the skb's headroom */
+-                      for (i = 0; i < tdata->nr_frags; i++, frag++) {
+-                              char *src = kmap_atomic(frag->page,
+-                                                      KM_SOFTIRQ0);
+-
+-                              memcpy(dst, src+frag->page_offset, frag->size);
+-                              dst += frag->size;
+-                              kunmap_atomic(src, KM_SOFTIRQ0);
++              do {
++                      int j = skb_shinfo(skb)->nr_frags;
++                      unsigned int copy;
++
++                      if (!sglen) {
++                              sg = sg_next(sg);
++                              sgpg = sg_page(sg);
++                              sgoffset = 0;
++                              sglen = sg->length;
++                              ++i;
+                       }
+-                      if (padlen) {
+-                              memset(dst, 0, padlen);
+-                              padlen = 0;
++                      copy = min(sglen, datalen);
++                      if (j && skb_can_coalesce(skb, j, sgpg,
++                                                sg->offset + sgoffset)) {
++                              skb_shinfo(skb)->frags[j - 1].size += copy;
++                      } else {
++                              get_page(sgpg);
++                              skb_fill_page_desc(skb, j, sgpg,
++                                                 sg->offset + sgoffset, copy);
+                       }
+-                      skb_put(skb, count + padlen);
+-              } else {
+-                      /* data fit into frag_list */
+-                      for (i = 0; i < tdata->nr_frags; i++)
+-                              get_page(tdata->frags[i].page);
+-
+-                      memcpy(skb_shinfo(skb)->frags, tdata->frags,
+-                              sizeof(skb_frag_t) * tdata->nr_frags);
+-                      skb_shinfo(skb)->nr_frags = tdata->nr_frags;
+-                      skb->len += count;
+-                      skb->data_len += count;
+-                      skb->truesize += count;
+-              }
+-
++                      sgoffset += copy;
++                      sglen -= copy;
++                      datalen -= copy;
++              } while (datalen);
+       } else {
+               pg = virt_to_page(task->data);
+-              get_page(pg);
+-              skb_fill_page_desc(skb, 0, pg, offset_in_page(task->data),
+-                                      count);
+-              skb->len += count;
+-              skb->data_len += count;
+-              skb->truesize += count;
++              while (datalen) {
++                      i = skb_shinfo(skb)->nr_frags;
++                      frag = &skb_shinfo(skb)->frags[i];
++
++                      get_page(pg);
++                      frag->page = pg;
++                      frag->page_offset = 0;
++                      frag->size = min((unsigned int)PAGE_SIZE, datalen);
++
++                      skb_shinfo(skb)->nr_frags++;
++                      datalen -= frag->size;
++                      pg++;
++              }
+       }
+       if (padlen) {
+               i = skb_shinfo(skb)->nr_frags;
+-              get_page(pad_page);
+-              skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, pad_page, 0,
+-                               padlen);
+-
+-              skb->data_len += padlen;
+-              skb->truesize += padlen;
+-              skb->len += padlen;
++              frag = &skb_shinfo(skb)->frags[i];
++              frag->page = pad_page;
++              frag->page_offset = 0;
++              frag->size = padlen;
++              skb_shinfo(skb)->nr_frags++;
+       }
++      datalen = count + padlen;
++      skb->data_len += datalen;
++      skb->truesize += datalen;
++      skb->len += datalen;
+       return 0;
+ }
+ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
+ {
++      struct iscsi_tcp_task *tcp_task = task->dd_data;
++      struct sk_buff *skb = tcp_task->dd_data;
+       struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data;
+       struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+-      struct iscsi_tcp_task *tcp_task = task->dd_data;
+-      struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+-      struct sk_buff *skb = tdata->skb;
+       unsigned int datalen;
+       int err;
+@@ -383,13 +300,12 @@
+               return 0;
+       datalen = skb->data_len;
+-      tdata->skb = NULL;
++      tcp_task->dd_data = NULL;
+       err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb);
+-      if (err > 0) {
+-              int pdulen = err;
+-
+       cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+                       task, skb, skb->len, skb->data_len, err);
++      if (err > 0) {
++              int pdulen = err;
+               if (task->conn->hdrdgst_en)
+                       pdulen += ISCSI_DIGEST_SIZE;
+@@ -409,14 +325,12 @@
+               return err;
+       }
+       /* reset skb to send when we are called again */
+-      tdata->skb = skb;
++      tcp_task->dd_data = skb;
+       return -EAGAIN;
+ }
+ int cxgb3i_pdu_init(void)
+ {
+-      if (SKB_TX_HEADROOM > (512 * MAX_SKB_FRAGS))
+-              skb_extra_headroom = SKB_TX_HEADROOM;
+       pad_page = alloc_page(GFP_KERNEL);
+       if (!pad_page)
+               return -ENOMEM;
+@@ -452,9 +366,7 @@
+       skb = skb_peek(&c3cn->receive_queue);
+       while (!err && skb) {
+               __skb_unlink(skb, &c3cn->receive_queue);
+-              read += skb_rx_pdulen(skb);
+-              cxgb3i_rx_debug("conn 0x%p, cn 0x%p, rx skb 0x%p, pdulen %u.\n",
+-                              conn, c3cn, skb, skb_rx_pdulen(skb));
++              read += skb_ulp_pdulen(skb);
+               err = cxgb3i_conn_read_pdu_skb(conn, skb);
+               __kfree_skb(skb);
+               skb = skb_peek(&c3cn->receive_queue);
+@@ -465,11 +377,6 @@
+               cxgb3i_c3cn_rx_credits(c3cn, read);
+       }
+       conn->rxdata_octets += read;
+-
+-      if (err) {
+-              cxgb3i_log_info("conn 0x%p rx failed err %d.\n", conn, err);
+-              iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+-      }
+ }
+ void cxgb3i_conn_tx_open(struct s3_conn *c3cn)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.h linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.h
+--- linux-2.6.29.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/cxgb3i/cxgb3i_pdu.h     2009-05-10 23:48:29.000000000 +0200
+@@ -53,7 +53,7 @@
+ #define ULP2_FLAG_DCRC_ERROR          0x20
+ #define ULP2_FLAG_PAD_ERROR           0x40
+-void cxgb3i_conn_closing(struct s3_conn *c3cn);
++void cxgb3i_conn_closing(struct s3_conn *);
+ void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
+ void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/fcoe/fcoe_sw.c linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/fcoe_sw.c
+--- linux-2.6.29.owrt/drivers/scsi/fcoe/fcoe_sw.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/fcoe_sw.c  2009-05-10 23:48:29.000000000 +0200
+@@ -104,19 +104,19 @@
+       .max_sectors = 0xffff,
+ };
+-/**
+- * fcoe_sw_lport_config() - sets up the fc_lport
++/*
++ * fcoe_sw_lport_config - sets up the fc_lport
+  * @lp: ptr to the fc_lport
+  * @shost: ptr to the parent scsi host
+  *
+  * Returns: 0 for success
++ *
+  */
+ static int fcoe_sw_lport_config(struct fc_lport *lp)
+ {
+       int i = 0;
+-      lp->link_up = 0;
+-      lp->qfull = 0;
++      lp->link_status = 0;
+       lp->max_retry_count = 3;
+       lp->e_d_tov = 2 * 1000; /* FC-FS default */
+       lp->r_a_tov = 2 * 2 * 1000;
+@@ -136,14 +136,16 @@
+       return 0;
+ }
+-/**
+- * fcoe_sw_netdev_config() - Set up netdev for SW FCoE
++/*
++ * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network
++ * related properties
+  * @lp : ptr to the fc_lport
+  * @netdev : ptr to the associated netdevice struct
+  *
+  * Must be called after fcoe_sw_lport_config() as it will use lport mutex
+  *
+  * Returns : 0 for success
++ *
+  */
+ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
+ {
+@@ -179,8 +181,9 @@
+       if (fc_set_mfs(lp, mfs))
+               return -EINVAL;
++      lp->link_status = ~FC_PAUSE & ~FC_LINK_UP;
+       if (!fcoe_link_ok(lp))
+-              lp->link_up = 1;
++              lp->link_status |= FC_LINK_UP;
+       /* offload features support */
+       if (fc->real_dev->features & NETIF_F_SG)
+@@ -188,7 +191,6 @@
+       skb_queue_head_init(&fc->fcoe_pending_queue);
+-      fc->fcoe_pending_queue_active = 0;
+       /* setup Source Mac Address */
+       memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr,
+@@ -222,15 +224,16 @@
+       return 0;
+ }
+-/**
+- * fcoe_sw_shost_config() - Sets up fc_lport->host
++/*
++ * fcoe_sw_shost_config - sets up fc_lport->host
+  * @lp : ptr to the fc_lport
+  * @shost : ptr to the associated scsi host
+  * @dev : device associated to scsi host
+  *
+- * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config()
++ * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config()
+  *
+  * Returns : 0 for success
++ *
+  */
+ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
+                               struct device *dev)
+@@ -258,8 +261,8 @@
+       return 0;
+ }
+-/**
+- * fcoe_sw_em_config() - allocates em for this lport
++/*
++ * fcoe_sw_em_config - allocates em for this lport
+  * @lp: the port that em is to allocated for
+  *
+  * Returns : 0 on success
+@@ -276,8 +279,8 @@
+       return 0;
+ }
+-/**
+- * fcoe_sw_destroy() - FCoE software HBA tear-down function
++/*
++ * fcoe_sw_destroy - FCoE software HBA tear-down function
+  * @netdev: ptr to the associated net_device
+  *
+  * Returns: 0 if link is OK for use by FCoE.
+@@ -298,7 +301,7 @@
+       if (!lp)
+               return -ENODEV;
+-      fc = lport_priv(lp);
++      fc = fcoe_softc(lp);
+       /* Logout of the fabric */
+       fc_fabric_logoff(lp);
+@@ -350,8 +353,8 @@
+       .frame_send = fcoe_xmit,
+ };
+-/**
+- * fcoe_sw_create() - this function creates the fcoe interface
++/*
++ * fcoe_sw_create - this function creates the fcoe interface
+  * @netdev: pointer the associated netdevice
+  *
+  * Creates fc_lport struct and scsi_host for lport, configures lport
+@@ -437,8 +440,8 @@
+       return rc;
+ }
+-/**
+- * fcoe_sw_match() - The FCoE SW transport match function
++/*
++ * fcoe_sw_match - the fcoe sw transport match function
+  *
+  * Returns : false always
+  */
+@@ -458,8 +461,8 @@
+       .device = 0xffff,
+ };
+-/**
+- * fcoe_sw_init() - Registers fcoe_sw_transport
++/*
++ * fcoe_sw_init - registers fcoe_sw_transport
+  *
+  * Returns : 0 on success
+  */
+@@ -468,22 +471,17 @@
+       /* attach to scsi transport */
+       scsi_transport_fcoe_sw =
+               fc_attach_transport(&fcoe_sw_transport_function);
+-
+       if (!scsi_transport_fcoe_sw) {
+               printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n");
+               return -ENODEV;
+       }
+-
+-      mutex_init(&fcoe_sw_transport.devlock);
+-      INIT_LIST_HEAD(&fcoe_sw_transport.devlist);
+-
+       /* register sw transport */
+       fcoe_transport_register(&fcoe_sw_transport);
+       return 0;
+ }
+-/**
+- * fcoe_sw_exit() - Unregisters fcoe_sw_transport
++/*
++ * fcoe_sw_exit - unregisters fcoe_sw_transport
+  *
+  * Returns : 0 on success
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/fcoe/fc_transport_fcoe.c linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/fc_transport_fcoe.c
+--- linux-2.6.29.owrt/drivers/scsi/fcoe/fc_transport_fcoe.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/fc_transport_fcoe.c        2009-05-10 23:48:29.000000000 +0200
+@@ -33,19 +33,19 @@
+ static DEFINE_MUTEX(fcoe_transports_lock);
+ /**
+- * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw
+- */
++ * fcoe_transport_default - returns ptr to the default transport fcoe_sw
++ **/
+ struct fcoe_transport *fcoe_transport_default(void)
+ {
+       return &fcoe_sw_transport;
+ }
+ /**
+- * fcoe_transport_to_pcidev() - get the pci dev from a netdev
++ * fcoe_transport_to_pcidev - get the pci dev from a netdev
+  * @netdev: the netdev that pci dev will be retrived from
+  *
+  * Returns: NULL or the corrsponding pci_dev
+- */
++ **/
+ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev)
+ {
+       if (!netdev->dev.parent)
+@@ -54,17 +54,18 @@
+ }
+ /**
+- * fcoe_transport_device_lookup() - Lookup a transport
++ * fcoe_transport_device_lookup - find out netdev is managed by the
++ * transport
++ * assign a transport to a device
+  * @netdev: the netdev the transport to be attached to
+  *
+  * This will look for existing offload driver, if not found, it falls back to
+  * the default sw hba (fcoe_sw) as its fcoe transport.
+  *
+  * Returns: 0 for success
+- */
+-static struct fcoe_transport_internal *
+-fcoe_transport_device_lookup(struct fcoe_transport *t,
+-                           struct net_device *netdev)
++ **/
++static struct fcoe_transport_internal *fcoe_transport_device_lookup(
++      struct fcoe_transport *t, struct net_device *netdev)
+ {
+       struct fcoe_transport_internal *ti;
+@@ -80,14 +81,14 @@
+       return NULL;
+ }
+ /**
+- * fcoe_transport_device_add() - Assign a transport to a device
++ * fcoe_transport_device_add - assign a transport to a device
+  * @netdev: the netdev the transport to be attached to
+  *
+  * This will look for existing offload driver, if not found, it falls back to
+  * the default sw hba (fcoe_sw) as its fcoe transport.
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_transport_device_add(struct fcoe_transport *t,
+                                    struct net_device *netdev)
+ {
+@@ -122,14 +123,14 @@
+ }
+ /**
+- * fcoe_transport_device_remove() - Remove a device from its transport
++ * fcoe_transport_device_remove - remove a device from its transport
+  * @netdev: the netdev the transport to be attached to
+  *
+- * This removes the device from the transport so the given transport will
++ * this removes the device from the transport so the given transport will
+  * not manage this device any more
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_transport_device_remove(struct fcoe_transport *t,
+                                       struct net_device *netdev)
+ {
+@@ -154,13 +155,13 @@
+ }
+ /**
+- * fcoe_transport_device_remove_all() - Remove all from transport devlist
++ * fcoe_transport_device_remove_all - remove all from transport devlist
+  *
+- * This removes the device from the transport so the given transport will
++ * this removes the device from the transport so the given transport will
+  * not manage this device any more
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static void fcoe_transport_device_remove_all(struct fcoe_transport *t)
+ {
+       struct fcoe_transport_internal *ti, *tmp;
+@@ -174,18 +175,18 @@
+ }
+ /**
+- * fcoe_transport_match() - Use the bus device match function to match the hw
+- * @t: The fcoe transport to check
+- * @netdev: The netdev to match against
++ * fcoe_transport_match - use the bus device match function to match the hw
++ * @t: the fcoe transport
++ * @netdev:
+  *
+- * This function is used to check if the given transport wants to manage the
++ * This function is used to check if the givne transport wants to manage the
+  * input netdev. if the transports implements the match function, it will be
+  * called, o.w. we just compare the pci vendor and device id.
+  *
+  * Returns: true for match up
+- */
++ **/
+ static bool fcoe_transport_match(struct fcoe_transport *t,
+-                               struct net_device *netdev)
++                              struct net_device *netdev)
+ {
+       /* match transport by vendor and device id */
+       struct pci_dev *pci;
+@@ -209,17 +210,17 @@
+ }
+ /**
+- * fcoe_transport_lookup() - Check if the transport is already registered
++ * fcoe_transport_lookup - check if the transport is already registered
+  * @t: the transport to be looked up
+  *
+  * This compares the parent device (pci) vendor and device id
+  *
+  * Returns: NULL if not found
+  *
+- * TODO: return default sw transport if no other transport is found
+- */
+-static struct fcoe_transport *
+-fcoe_transport_lookup(struct net_device *netdev)
++ * TODO - return default sw transport if no other transport is found
++ **/
++static struct fcoe_transport *fcoe_transport_lookup(
++      struct net_device *netdev)
+ {
+       struct fcoe_transport *t;
+@@ -238,11 +239,11 @@
+ }
+ /**
+- * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list
++ * fcoe_transport_register - adds a fcoe transport to the fcoe transports list
+  * @t: ptr to the fcoe transport to be added
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_transport_register(struct fcoe_transport *t)
+ {
+       struct fcoe_transport *tt;
+@@ -258,6 +259,9 @@
+       list_add_tail(&t->list, &fcoe_transports);
+       mutex_unlock(&fcoe_transports_lock);
++      mutex_init(&t->devlock);
++      INIT_LIST_HEAD(&t->devlist);
++
+       printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name);
+       return 0;
+@@ -265,11 +269,11 @@
+ EXPORT_SYMBOL_GPL(fcoe_transport_register);
+ /**
+- * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list
++ * fcoe_transport_unregister - remove the tranport fro the fcoe transports list
+  * @t: ptr to the fcoe transport to be removed
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_transport_unregister(struct fcoe_transport *t)
+ {
+       struct fcoe_transport *tt, *tmp;
+@@ -290,8 +294,8 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_transport_unregister);
+-/**
+- * fcoe_load_transport_driver() - Load an offload driver by alias name
++/*
++ * fcoe_load_transport_driver - load an offload driver by alias name
+  * @netdev: the target net device
+  *
+  * Requests for an offload driver module as the fcoe transport, if fails, it
+@@ -303,7 +307,7 @@
+  *    3. pure hw fcoe hba may not have netdev
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_load_transport_driver(struct net_device *netdev)
+ {
+       struct pci_dev *pci;
+@@ -331,14 +335,14 @@
+ EXPORT_SYMBOL_GPL(fcoe_load_transport_driver);
+ /**
+- * fcoe_transport_attach() - Load transport to fcoe
++ * fcoe_transport_attach - load transport to fcoe
+  * @netdev: the netdev the transport to be attached to
+  *
+  * This will look for existing offload driver, if not found, it falls back to
+  * the default sw hba (fcoe_sw) as its fcoe transport.
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_transport_attach(struct net_device *netdev)
+ {
+       struct fcoe_transport *t;
+@@ -369,11 +373,11 @@
+ EXPORT_SYMBOL_GPL(fcoe_transport_attach);
+ /**
+- * fcoe_transport_release() - Unload transport from fcoe
++ * fcoe_transport_release - unload transport from fcoe
+  * @netdev: the net device on which fcoe is to be released
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_transport_release(struct net_device *netdev)
+ {
+       struct fcoe_transport *t;
+@@ -406,12 +410,12 @@
+ EXPORT_SYMBOL_GPL(fcoe_transport_release);
+ /**
+- * fcoe_transport_init() - Initializes fcoe transport layer
++ * fcoe_transport_init - initializes fcoe transport layer
+  *
+  * This prepares for the fcoe transport layer
+  *
+  * Returns: none
+- */
++ **/
+ int __init fcoe_transport_init(void)
+ {
+       INIT_LIST_HEAD(&fcoe_transports);
+@@ -420,13 +424,12 @@
+ }
+ /**
+- * fcoe_transport_exit() - Cleans up the fcoe transport layer
+- *
++ * fcoe_transport_exit - cleans up the fcoe transport layer
+  * This cleans up the fcoe transport layer. removing any transport on the list,
+  * note that the transport destroy func is not called here.
+  *
+  * Returns: none
+- */
++ **/
+ int __exit fcoe_transport_exit(void)
+ {
+       struct fcoe_transport *t, *tmp;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/fcoe/libfcoe.c linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/libfcoe.c
+--- linux-2.6.29.owrt/drivers/scsi/fcoe/libfcoe.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/fcoe/libfcoe.c  2009-05-10 23:48:29.000000000 +0200
+@@ -49,7 +49,6 @@
+ static int debug_fcoe;
+ #define FCOE_MAX_QUEUE_DEPTH  256
+-#define FCOE_LOW_QUEUE_DEPTH  32
+ /* destination address mode */
+ #define FCOE_GW_ADDR_MODE         0x00
+@@ -70,6 +69,8 @@
+ /* Function Prototyes */
+ static int fcoe_check_wait_queue(struct fc_lport *);
++static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *);
++static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *);
+ static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *);
+ #ifdef CONFIG_HOTPLUG_CPU
+ static int fcoe_cpu_callback(struct notifier_block *, ulong, void *);
+@@ -90,13 +91,13 @@
+ };
+ /**
+- * fcoe_create_percpu_data() - creates the associated cpu data
++ * fcoe_create_percpu_data - creates the associated cpu data
+  * @cpu: index for the cpu where fcoe cpu data will be created
+  *
+  * create percpu stats block, from cpu add notifier
+  *
+  * Returns: none
+- */
++ **/
+ static void fcoe_create_percpu_data(int cpu)
+ {
+       struct fc_lport *lp;
+@@ -114,13 +115,13 @@
+ }
+ /**
+- * fcoe_destroy_percpu_data() - destroys the associated cpu data
++ * fcoe_destroy_percpu_data - destroys the associated cpu data
+  * @cpu: index for the cpu where fcoe cpu data will destroyed
+  *
+  * destroy percpu stats block called by cpu add/remove notifier
+  *
+  * Retuns: none
+- */
++ **/
+ static void fcoe_destroy_percpu_data(int cpu)
+ {
+       struct fc_lport *lp;
+@@ -136,7 +137,7 @@
+ }
+ /**
+- * fcoe_cpu_callback() - fcoe cpu hotplug event callback
++ * fcoe_cpu_callback - fcoe cpu hotplug event callback
+  * @nfb: callback data block
+  * @action: event triggering the callback
+  * @hcpu: index for the cpu of this event
+@@ -144,7 +145,7 @@
+  * this creates or destroys per cpu data for fcoe
+  *
+  * Returns NOTIFY_OK always.
+- */
++ **/
+ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
+                            void *hcpu)
+ {
+@@ -165,7 +166,7 @@
+ #endif /* CONFIG_HOTPLUG_CPU */
+ /**
+- * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ
++ * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ
+  * @skb: the receive skb
+  * @dev: associated net device
+  * @ptype: context
+@@ -174,7 +175,7 @@
+  * this function will receive the packet and build fc frame and pass it up
+  *
+  * Returns: 0 for success
+- */
++ **/
+ int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
+            struct packet_type *ptype, struct net_device *olddev)
+ {
+@@ -264,11 +265,11 @@
+ EXPORT_SYMBOL_GPL(fcoe_rcv);
+ /**
+- * fcoe_start_io() - pass to netdev to start xmit for fcoe
++ * fcoe_start_io - pass to netdev to start xmit for fcoe
+  * @skb: the skb to be xmitted
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static inline int fcoe_start_io(struct sk_buff *skb)
+ {
+       int rc;
+@@ -282,12 +283,12 @@
+ }
+ /**
+- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
++ * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof
+  * @skb: the skb to be xmitted
+  * @tlen: total len
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
+ {
+       struct fcoe_percpu_s *fps;
+@@ -325,12 +326,13 @@
+ }
+ /**
+- * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
++ * fcoe_fc_crc - calculates FC CRC in this fcoe skb
+  * @fp: the fc_frame containg data to be checksummed
+  *
+  * This uses crc32() to calculate the crc for fc frame
+  * Return   : 32 bit crc
+- */
++ *
++ **/
+ u32 fcoe_fc_crc(struct fc_frame *fp)
+ {
+       struct sk_buff *skb = fp_skb(fp);
+@@ -361,12 +363,13 @@
+ EXPORT_SYMBOL_GPL(fcoe_fc_crc);
+ /**
+- * fcoe_xmit() - FCoE frame transmit function
++ * fcoe_xmit - FCoE frame transmit function
+  * @lp:       the associated local port
+  * @fp: the fc_frame to be transmitted
+  *
+  * Return   : 0 for success
+- */
++ *
++ **/
+ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
+ {
+       int wlen, rc = 0;
+@@ -386,7 +389,7 @@
+       WARN_ON((fr_len(fp) % sizeof(u32)) != 0);
+-      fc = lport_priv(lp);
++      fc = fcoe_softc(lp);
+       /*
+        * if it is a flogi then we need to learn gw-addr
+        * and my own fcid
+@@ -436,7 +439,7 @@
+       if (skb_is_nonlinear(skb)) {
+               skb_frag_t *frag;
+               if (fcoe_get_paged_crc_eof(skb, tlen)) {
+-                      kfree_skb(skb);
++                      kfree(skb);
+                       return -ENOMEM;
+               }
+               frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1];
+@@ -499,22 +502,21 @@
+               rc = fcoe_start_io(skb);
+       if (rc) {
+-              spin_lock_bh(&fc->fcoe_pending_queue.lock);
+-              __skb_queue_tail(&fc->fcoe_pending_queue, skb);
+-              spin_unlock_bh(&fc->fcoe_pending_queue.lock);
++              fcoe_insert_wait_queue(lp, skb);
+               if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
+-                      lp->qfull = 1;
++                      fc_pause(lp);
+       }
+       return 0;
+ }
+ EXPORT_SYMBOL_GPL(fcoe_xmit);
+-/**
+- * fcoe_percpu_receive_thread() - recv thread per cpu
++/*
++ * fcoe_percpu_receive_thread - recv thread per cpu
+  * @arg: ptr to the fcoe per cpu struct
+  *
+  * Return: 0 for success
++ *
+  */
+ int fcoe_percpu_receive_thread(void *arg)
+ {
+@@ -531,7 +533,7 @@
+       struct fcoe_softc *fc;
+       struct fcoe_hdr *hp;
+-      set_user_nice(current, -20);
++      set_user_nice(current, 19);
+       while (!kthread_should_stop()) {
+@@ -656,7 +658,7 @@
+ }
+ /**
+- * fcoe_recv_flogi() - flogi receive function
++ * fcoe_recv_flogi - flogi receive function
+  * @fc: associated fcoe_softc
+  * @fp: the recieved frame
+  * @sa: the source address of this flogi
+@@ -665,7 +667,7 @@
+  * mac address for the initiator, eitehr OUI based or GW based.
+  *
+  * Returns: none
+- */
++ **/
+ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa)
+ {
+       struct fc_frame_header *fh;
+@@ -713,23 +715,32 @@
+ }
+ /**
+- * fcoe_watchdog() - fcoe timer callback
++ * fcoe_watchdog - fcoe timer callback
+  * @vp:
+  *
+- * This checks the pending queue length for fcoe and set lport qfull
++ * This checks the pending queue length for fcoe and put fcoe to be paused state
+  * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
+  * fcoe_hostlist.
+  *
+  * Returns: 0 for success
+- */
++ **/
+ void fcoe_watchdog(ulong vp)
+ {
++      struct fc_lport *lp;
+       struct fcoe_softc *fc;
++      int paused = 0;
+       read_lock(&fcoe_hostlist_lock);
+       list_for_each_entry(fc, &fcoe_hostlist, list) {
+-              if (fc->lp)
+-                      fcoe_check_wait_queue(fc->lp);
++              lp = fc->lp;
++              if (lp) {
++                      if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
++                              paused = 1;
++                      if (fcoe_check_wait_queue(lp) <  FCOE_MAX_QUEUE_DEPTH) {
++                              if (paused)
++                                      fc_unpause(lp);
++                      }
++              }
+       }
+       read_unlock(&fcoe_hostlist_lock);
+@@ -739,64 +750,96 @@
+ /**
+- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
++ * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue
+  * @lp: the fc_port for this skb
+  * @skb: the associated skb to be xmitted
+  *
+  * This empties the wait_queue, dequeue the head of the wait_queue queue
+  * and calls fcoe_start_io() for each packet, if all skb have been
+- * transmitted, return qlen or -1 if a error occurs, then restore
+- * wait_queue and  try again later.
++ * transmitted, return 0 if a error occurs, then restore wait_queue and
++ * try again later.
+  *
+  * The wait_queue is used when the skb transmit fails. skb will go
+  * in the wait_queue which will be emptied by the time function OR
+  * by the next skb transmit.
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_check_wait_queue(struct fc_lport *lp)
+ {
+-      struct fcoe_softc *fc = lport_priv(lp);
++      int rc, unpause = 0;
++      int paused = 0;
+       struct sk_buff *skb;
+-      int rc = -1;
++      struct fcoe_softc *fc;
++      fc = fcoe_softc(lp);
+       spin_lock_bh(&fc->fcoe_pending_queue.lock);
+-      if (fc->fcoe_pending_queue_active)
+-              goto out;
+-      fc->fcoe_pending_queue_active = 1;
+-
+-      while (fc->fcoe_pending_queue.qlen) {
+-              /* keep qlen > 0 until fcoe_start_io succeeds */
+-              fc->fcoe_pending_queue.qlen++;
+-              skb = __skb_dequeue(&fc->fcoe_pending_queue);
+-
+-              spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+-              rc = fcoe_start_io(skb);
+-              spin_lock_bh(&fc->fcoe_pending_queue.lock);
+-              if (rc) {
+-                      __skb_queue_head(&fc->fcoe_pending_queue, skb);
+-                      /* undo temporary increment above */
+-                      fc->fcoe_pending_queue.qlen--;
+-                      break;
++      /*
++       * is this interface paused?
++       */
++      if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
++              paused = 1;
++      if (fc->fcoe_pending_queue.qlen) {
++              while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) {
++                      spin_unlock_bh(&fc->fcoe_pending_queue.lock);
++                      rc = fcoe_start_io(skb);
++                      if (rc) {
++                              fcoe_insert_wait_queue_head(lp, skb);
++                              return rc;
++                      }
++                      spin_lock_bh(&fc->fcoe_pending_queue.lock);
+               }
+-              /* undo temporary increment above */
+-              fc->fcoe_pending_queue.qlen--;
++              if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH)
++                      unpause = 1;
+       }
++      spin_unlock_bh(&fc->fcoe_pending_queue.lock);
++      if ((unpause) && (paused))
++              fc_unpause(lp);
++      return fc->fcoe_pending_queue.qlen;
++}
+-      if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
+-              lp->qfull = 0;
+-      fc->fcoe_pending_queue_active = 0;
+-      rc = fc->fcoe_pending_queue.qlen;
+-out:
++/**
++ * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head
++ * @lp: the fc_port for this skb
++ * @skb: the associated skb to be xmitted
++ *
++ * Returns: none
++ **/
++static void fcoe_insert_wait_queue_head(struct fc_lport *lp,
++                                      struct sk_buff *skb)
++{
++      struct fcoe_softc *fc;
++
++      fc = fcoe_softc(lp);
++      spin_lock_bh(&fc->fcoe_pending_queue.lock);
++      __skb_queue_head(&fc->fcoe_pending_queue, skb);
+       spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+-      return rc;
+ }
+ /**
+- * fcoe_dev_setup() - setup link change notification interface
+- */
+-static void fcoe_dev_setup()
++ * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail
++ * @lp: the fc_port for this skb
++ * @skb: the associated skb to be xmitted
++ *
++ * Returns: none
++ **/
++static void fcoe_insert_wait_queue(struct fc_lport *lp,
++                                 struct sk_buff *skb)
++{
++      struct fcoe_softc *fc;
++
++      fc = fcoe_softc(lp);
++      spin_lock_bh(&fc->fcoe_pending_queue.lock);
++      __skb_queue_tail(&fc->fcoe_pending_queue, skb);
++      spin_unlock_bh(&fc->fcoe_pending_queue.lock);
++}
++
++/**
++ * fcoe_dev_setup - setup link change notification interface
++ *
++ **/
++static void fcoe_dev_setup(void)
+ {
+       /*
+        * here setup a interface specific wd time to
+@@ -806,15 +849,15 @@
+ }
+ /**
+- * fcoe_dev_setup() - cleanup link change notification interface
+- */
++ * fcoe_dev_setup - cleanup link change notification interface
++ **/
+ static void fcoe_dev_cleanup(void)
+ {
+       unregister_netdevice_notifier(&fcoe_notifier);
+ }
+ /**
+- * fcoe_device_notification() - netdev event notification callback
++ * fcoe_device_notification - netdev event notification callback
+  * @notifier: context of the notification
+  * @event: type of event
+  * @ptr: fixed array for output parsed ifname
+@@ -822,7 +865,7 @@
+  * This function is called by the ethernet driver in case of link change event
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_device_notification(struct notifier_block *notifier,
+                                   ulong event, void *ptr)
+ {
+@@ -830,7 +873,7 @@
+       struct net_device *real_dev = ptr;
+       struct fcoe_softc *fc;
+       struct fcoe_dev_stats *stats;
+-      u32 new_link_up;
++      u16 new_status;
+       u32 mfs;
+       int rc = NOTIFY_OK;
+@@ -847,15 +890,17 @@
+               goto out;
+       }
+-      new_link_up = lp->link_up;
++      new_status = lp->link_status;
+       switch (event) {
+       case NETDEV_DOWN:
+       case NETDEV_GOING_DOWN:
+-              new_link_up = 0;
++              new_status &= ~FC_LINK_UP;
+               break;
+       case NETDEV_UP:
+       case NETDEV_CHANGE:
+-              new_link_up = !fcoe_link_ok(lp);
++              new_status &= ~FC_LINK_UP;
++              if (!fcoe_link_ok(lp))
++                      new_status |= FC_LINK_UP;
+               break;
+       case NETDEV_CHANGEMTU:
+               mfs = fc->real_dev->mtu -
+@@ -863,15 +908,17 @@
+                        sizeof(struct fcoe_crc_eof));
+               if (mfs >= FC_MIN_MAX_FRAME)
+                       fc_set_mfs(lp, mfs);
+-              new_link_up = !fcoe_link_ok(lp);
++              new_status &= ~FC_LINK_UP;
++              if (!fcoe_link_ok(lp))
++                      new_status |= FC_LINK_UP;
+               break;
+       case NETDEV_REGISTER:
+               break;
+       default:
+               FC_DBG("unknown event %ld call", event);
+       }
+-      if (lp->link_up != new_link_up) {
+-              if (new_link_up)
++      if (lp->link_status != new_status) {
++              if ((new_status & FC_LINK_UP) == FC_LINK_UP)
+                       fc_linkup(lp);
+               else {
+                       stats = lp->dev_stats[smp_processor_id()];
+@@ -886,12 +933,12 @@
+ }
+ /**
+- * fcoe_if_to_netdev() - parse a name buffer to get netdev
++ * fcoe_if_to_netdev - parse a name buffer to get netdev
+  * @ifname: fixed array for output parsed ifname
+  * @buffer: incoming buffer to be copied
+  *
+  * Returns: NULL or ptr to netdeive
+- */
++ **/
+ static struct net_device *fcoe_if_to_netdev(const char *buffer)
+ {
+       char *cp;
+@@ -908,13 +955,13 @@
+ }
+ /**
+- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
++ * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev
+  * @netdev: the target netdev
+  *
+  * Returns: ptr to the struct module, NULL for failure
+- */
+-static struct module *
+-fcoe_netdev_to_module_owner(const struct net_device *netdev)
++ **/
++static struct module *fcoe_netdev_to_module_owner(
++      const struct net_device *netdev)
+ {
+       struct device *dev;
+@@ -932,14 +979,12 @@
+ }
+ /**
+- * fcoe_ethdrv_get() - Hold the Ethernet driver
+- * @netdev: the target netdev
+- *
+- * Holds the Ethernet driver module by try_module_get() for
++ * fcoe_ethdrv_get - holds the nic driver module by  try_module_get() for
+  * the corresponding netdev.
++ * @netdev: the target netdev
+  *
+  * Returns: 0 for succsss
+- */
++ **/
+ static int fcoe_ethdrv_get(const struct net_device *netdev)
+ {
+       struct module *owner;
+@@ -954,14 +999,12 @@
+ }
+ /**
+- * fcoe_ethdrv_put() - Release the Ethernet driver
+- * @netdev: the target netdev
+- *
+- * Releases the Ethernet driver module by module_put for
++ * fcoe_ethdrv_get - releases the nic driver module by module_put for
+  * the corresponding netdev.
++ * @netdev: the target netdev
+  *
+  * Returns: 0 for succsss
+- */
++ **/
+ static int fcoe_ethdrv_put(const struct net_device *netdev)
+ {
+       struct module *owner;
+@@ -977,12 +1020,12 @@
+ }
+ /**
+- * fcoe_destroy() - handles the destroy from sysfs
++ * fcoe_destroy- handles the destroy from sysfs
+  * @buffer: expcted to be a eth if name
+  * @kp: associated kernel param
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
+ {
+       int rc;
+@@ -1015,12 +1058,12 @@
+ }
+ /**
+- * fcoe_create() - Handles the create call from sysfs
++ * fcoe_create - handles the create call from sysfs
+  * @buffer: expcted to be a eth if name
+  * @kp: associated kernel param
+  *
+  * Returns: 0 for success
+- */
++ **/
+ static int fcoe_create(const char *buffer, struct kernel_param *kp)
+ {
+       int rc;
+@@ -1061,8 +1104,8 @@
+ __MODULE_PARM_TYPE(destroy, "string");
+ MODULE_PARM_DESC(destroy, "Destroy fcoe port");
+-/**
+- * fcoe_link_ok() - Check if link is ok for the fc_lport
++/*
++ * fcoe_link_ok - check if link is ok for the fc_lport
+  * @lp: ptr to the fc_lport
+  *
+  * Any permanently-disqualifying conditions have been previously checked.
+@@ -1077,7 +1120,7 @@
+  */
+ int fcoe_link_ok(struct fc_lport *lp)
+ {
+-      struct fcoe_softc *fc = lport_priv(lp);
++      struct fcoe_softc *fc = fcoe_softc(lp);
+       struct net_device *dev = fc->real_dev;
+       struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+       int rc = 0;
+@@ -1106,8 +1149,9 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_link_ok);
+-/**
+- * fcoe_percpu_clean() - Clear the pending skbs for an lport
++/*
++ * fcoe_percpu_clean - frees skb of the corresponding lport from the per
++ * cpu queue.
+  * @lp: the fc_lport
+  */
+ void fcoe_percpu_clean(struct fc_lport *lp)
+@@ -1141,11 +1185,11 @@
+ EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
+ /**
+- * fcoe_clean_pending_queue() - Dequeue a skb and free it
++ * fcoe_clean_pending_queue - dequeue skb and free it
+  * @lp: the corresponding fc_lport
+  *
+  * Returns: none
+- */
++ **/
+ void fcoe_clean_pending_queue(struct fc_lport *lp)
+ {
+       struct fcoe_softc  *fc = lport_priv(lp);
+@@ -1162,21 +1206,21 @@
+ EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
+ /**
+- * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
++ * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport
+  * @sht: ptr to the scsi host templ
+  * @priv_size: size of private data after fc_lport
+  *
+  * Returns: ptr to Scsi_Host
+- * TODO: to libfc?
++ * TODO - to libfc?
+  */
+-static inline struct Scsi_Host *
+-libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
++static inline struct Scsi_Host *libfc_host_alloc(
++      struct scsi_host_template *sht, int priv_size)
+ {
+       return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
+ }
+ /**
+- * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc
++ * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc
+  * @sht: ptr to the scsi host templ
+  * @priv_size: size of private data after fc_lport
+  *
+@@ -1188,8 +1232,8 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_host_alloc);
+-/**
+- * fcoe_reset() - Resets the fcoe
++/*
++ * fcoe_reset - resets the fcoe
+  * @shost: shost the reset is from
+  *
+  * Returns: always 0
+@@ -1202,8 +1246,8 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_reset);
+-/**
+- * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN.
++/*
++ * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN.
+  * @mac: mac address
+  * @scheme: check port
+  * @port: port indicator for converting
+@@ -1242,15 +1286,14 @@
+       return wwn;
+ }
+ EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac);
+-
+-/**
+- * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
++/*
++ * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device
+  * @device: this is currently ptr to net_device
+  *
+  * Returns: NULL or the located fcoe_softc
+  */
+-static struct fcoe_softc *
+-fcoe_hostlist_lookup_softc(const struct net_device *dev)
++static struct fcoe_softc *fcoe_hostlist_lookup_softc(
++      const struct net_device *dev)
+ {
+       struct fcoe_softc *fc;
+@@ -1265,8 +1308,8 @@
+       return NULL;
+ }
+-/**
+- * fcoe_hostlist_lookup() - Find the corresponding lport by netdev
++/*
++ * fcoe_hostlist_lookup - find the corresponding lport by netdev
+  * @netdev: ptr to net_device
+  *
+  * Returns: 0 for success
+@@ -1281,8 +1324,8 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
+-/**
+- * fcoe_hostlist_add() - Add a lport to lports list
++/*
++ * fcoe_hostlist_add - add a lport to lports list
+  * @lp: ptr to the fc_lport to badded
+  *
+  * Returns: 0 for success
+@@ -1293,7 +1336,7 @@
+       fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp));
+       if (!fc) {
+-              fc = lport_priv(lp);
++              fc = fcoe_softc(lp);
+               write_lock_bh(&fcoe_hostlist_lock);
+               list_add_tail(&fc->list, &fcoe_hostlist);
+               write_unlock_bh(&fcoe_hostlist_lock);
+@@ -1302,8 +1345,8 @@
+ }
+ EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
+-/**
+- * fcoe_hostlist_remove() - remove a lport from lports list
++/*
++ * fcoe_hostlist_remove - remove a lport from lports list
+  * @lp: ptr to the fc_lport to badded
+  *
+  * Returns: 0 for success
+@@ -1323,12 +1366,12 @@
+ EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
+ /**
+- * fcoe_libfc_config() - sets up libfc related properties for lport
++ * fcoe_libfc_config - sets up libfc related properties for lport
+  * @lp: ptr to the fc_lport
+  * @tt: libfc function template
+  *
+  * Returns : 0 for success
+- */
++ **/
+ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
+ {
+       /* Set the function pointers set by the LLDD */
+@@ -1346,14 +1389,14 @@
+ EXPORT_SYMBOL_GPL(fcoe_libfc_config);
+ /**
+- * fcoe_init() - fcoe module loading initialization
++ * fcoe_init - fcoe module loading initialization
+  *
+  * Initialization routine
+  * 1. Will create fc transport software structure
+  * 2. initialize the link list of port information structure
+  *
+  * Returns 0 on success, negative on failure
+- */
++ **/
+ static int __init fcoe_init(void)
+ {
+       int cpu;
+@@ -1390,6 +1433,7 @@
+                       } else {
+                               fcoe_percpu[cpu] = NULL;
+                               kfree(p);
++
+                       }
+               }
+       }
+@@ -1399,9 +1443,11 @@
+        */
+       fcoe_dev_setup();
+-      setup_timer(&fcoe_timer, fcoe_watchdog, 0);
+-
+-      mod_timer(&fcoe_timer, jiffies + (10 * HZ));
++      init_timer(&fcoe_timer);
++      fcoe_timer.data = 0;
++      fcoe_timer.function = fcoe_watchdog;
++      fcoe_timer.expires = (jiffies + (10 * HZ));
++      add_timer(&fcoe_timer);
+       /* initiatlize the fcoe transport */
+       fcoe_transport_init();
+@@ -1413,10 +1459,10 @@
+ module_init(fcoe_init);
+ /**
+- * fcoe_exit() - fcoe module unloading cleanup
++ * fcoe_exit - fcoe module unloading cleanup
+  *
+  * Returns 0 on success, negative on failure
+- */
++ **/
+ static void __exit fcoe_exit(void)
+ {
+       u32 idx;
+@@ -1437,7 +1483,7 @@
+        */
+       del_timer_sync(&fcoe_timer);
+-      /* releases the associated fcoe transport for each lport */
++      /* releases the assocaited fcoe transport for each lport */
+       list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
+               fcoe_transport_release(fc->real_dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/hptiop.c linux-2.6.29-rc3.owrt/drivers/scsi/hptiop.c
+--- linux-2.6.29.owrt/drivers/scsi/hptiop.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/hptiop.c        2009-05-10 23:48:29.000000000 +0200
+@@ -1251,7 +1251,6 @@
+       { PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+       { PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
+       { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+-      { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
+       { PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
+       { PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
+       { PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvfc.c linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvfc.c
+--- linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvfc.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvfc.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1573,6 +1573,9 @@
+       vfc_cmd->resp_len = sizeof(vfc_cmd->rsp);
+       vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata;
+       vfc_cmd->tgt_scsi_id = rport->port_id;
++      if ((rport->supported_classes & FC_COS_CLASS3) &&
++          (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3))
++              vfc_cmd->flags = IBMVFC_CLASS_3_ERR;
+       vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd);
+       int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun);
+       memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len);
+@@ -3263,7 +3266,6 @@
+               return -ENOMEM;
+       }
+-      memset(tgt, 0, sizeof(*tgt));
+       tgt->scsi_id = scsi_id;
+       tgt->new_scsi_id = scsi_id;
+       tgt->vhost = vhost;
+@@ -3574,18 +3576,9 @@
+ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
+ {
+       struct ibmvfc_host *vhost = tgt->vhost;
+-      struct fc_rport *rport = tgt->rport;
++      struct fc_rport *rport;
+       unsigned long flags;
+-      if (rport) {
+-              tgt_dbg(tgt, "Setting rport roles\n");
+-              fc_remote_port_rolechg(rport, tgt->ids.roles);
+-              spin_lock_irqsave(vhost->host->host_lock, flags);
+-              ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+-              spin_unlock_irqrestore(vhost->host->host_lock, flags);
+-              return;
+-      }
+-
+       tgt_dbg(tgt, "Adding rport\n");
+       rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
+       spin_lock_irqsave(vhost->host->host_lock, flags);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvfc.h linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvfc.h
+--- linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvfc.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvfc.h       2009-05-10 23:48:29.000000000 +0200
+@@ -32,7 +32,7 @@
+ #define IBMVFC_DRIVER_VERSION         "1.0.4"
+ #define IBMVFC_DRIVER_DATE            "(November 14, 2008)"
+-#define IBMVFC_DEFAULT_TIMEOUT        60
++#define IBMVFC_DEFAULT_TIMEOUT        15
+ #define IBMVFC_INIT_TIMEOUT           120
+ #define IBMVFC_MAX_REQUESTS_DEFAULT   100
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvscsi.c linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvscsi.c
+--- linux-2.6.29.owrt/drivers/scsi/ibmvscsi/ibmvscsi.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/ibmvscsi/ibmvscsi.c     2009-05-10 23:48:29.000000000 +0200
+@@ -432,7 +432,6 @@
+                               sdev_printk(KERN_ERR, cmd->device,
+                                           "Can't allocate memory "
+                                           "for indirect table\n");
+-                      scsi_dma_unmap(cmd);
+                       return 0;
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/lasi700.c linux-2.6.29-rc3.owrt/drivers/scsi/lasi700.c
+--- linux-2.6.29.owrt/drivers/scsi/lasi700.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/lasi700.c       2009-05-10 23:48:29.000000000 +0200
+@@ -103,7 +103,7 @@
+       hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
+       if (!hostdata) {
+-              dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n");
++              dev_printk(KERN_ERR, dev, "Failed to allocate host data\n");
+               return -ENOMEM;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libfc/fc_disc.c linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_disc.c
+--- linux-2.6.29.owrt/drivers/scsi/libfc/fc_disc.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_disc.c 2009-05-10 23:48:29.000000000 +0200
+@@ -64,7 +64,7 @@
+ static void fc_disc_restart(struct fc_disc *);
+ /**
+- * fc_disc_lookup_rport() - lookup a remote port by port_id
++ * fc_disc_lookup_rport - lookup a remote port by port_id
+  * @lport: Fibre Channel host port instance
+  * @port_id: remote port port_id to match
+  */
+@@ -92,7 +92,7 @@
+ }
+ /**
+- * fc_disc_stop_rports() - delete all the remote ports associated with the lport
++ * fc_disc_stop_rports - delete all the remote ports associated with the lport
+  * @disc: The discovery job to stop rports on
+  *
+  * Locking Note: This function expects that the lport mutex is locked before
+@@ -117,7 +117,7 @@
+ }
+ /**
+- * fc_disc_rport_callback() - Event handler for rport events
++ * fc_disc_rport_callback - Event handler for rport events
+  * @lport: The lport which is receiving the event
+  * @rport: The rport which the event has occured on
+  * @event: The event that occured
+@@ -151,7 +151,7 @@
+ }
+ /**
+- * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN)
++ * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN)
+  * @sp: Current sequence of the RSCN exchange
+  * @fp: RSCN Frame
+  * @lport: Fibre Channel host port instance
+@@ -246,7 +246,7 @@
+                       list_del(&dp->peers);
+                       rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
+                       if (rport) {
+-                              rdata = rport->dd_data;
++                              rdata = RPORT_TO_PRIV(rport);
+                               list_del(&rdata->peers);
+                               lport->tt.rport_logoff(rport);
+                       }
+@@ -265,7 +265,7 @@
+ }
+ /**
+- * fc_disc_recv_req() - Handle incoming requests
++ * fc_disc_recv_req - Handle incoming requests
+  * @sp: Current sequence of the request exchange
+  * @fp: The frame
+  * @lport: The FC local port
+@@ -294,7 +294,7 @@
+ }
+ /**
+- * fc_disc_restart() - Restart discovery
++ * fc_disc_restart - Restart discovery
+  * @lport: FC discovery context
+  *
+  * Locking Note: This function expects that the disc mutex
+@@ -322,7 +322,7 @@
+ }
+ /**
+- * fc_disc_start() - Fibre Channel Target discovery
++ * fc_disc_start - Fibre Channel Target discovery
+  * @lport: FC local port
+  *
+  * Returns non-zero if discovery cannot be started.
+@@ -383,7 +383,7 @@
+ };
+ /**
+- * fc_disc_new_target() - Handle new target found by discovery
++ * fc_disc_new_target - Handle new target found by discovery
+  * @lport: FC local port
+  * @rport: The previous FC remote port (NULL if new remote port)
+  * @ids: Identifiers for the new FC remote port
+@@ -396,7 +396,7 @@
+                             struct fc_rport_identifiers *ids)
+ {
+       struct fc_lport *lport = disc->lport;
+-      struct fc_rport_libfc_priv *rdata;
++      struct fc_rport_libfc_priv *rp;
+       int error = 0;
+       if (rport && ids->port_name) {
+@@ -430,15 +430,15 @@
+                               dp.ids.port_name = ids->port_name;
+                               dp.ids.node_name = ids->node_name;
+                               dp.ids.roles = ids->roles;
+-                              rport = lport->tt.rport_create(&dp);
++                              rport = fc_rport_rogue_create(&dp);
+                       }
+                       if (!rport)
+                               error = -ENOMEM;
+               }
+               if (rport) {
+-                      rdata = rport->dd_data;
+-                      rdata->ops = &fc_disc_rport_ops;
+-                      rdata->rp_state = RPORT_ST_INIT;
++                      rp = rport->dd_data;
++                      rp->ops = &fc_disc_rport_ops;
++                      rp->rp_state = RPORT_ST_INIT;
+                       lport->tt.rport_login(rport);
+               }
+       }
+@@ -446,20 +446,20 @@
+ }
+ /**
+- * fc_disc_del_target() - Delete a target
++ * fc_disc_del_target - Delete a target
+  * @disc: FC discovery context
+  * @rport: The remote port to be removed
+  */
+ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
+ {
+       struct fc_lport *lport = disc->lport;
+-      struct fc_rport_libfc_priv *rdata = rport->dd_data;
++      struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport);
+       list_del(&rdata->peers);
+       lport->tt.rport_logoff(rport);
+ }
+ /**
+- * fc_disc_done() - Discovery has been completed
++ * fc_disc_done - Discovery has been completed
+  * @disc: FC discovery context
+  */
+ static void fc_disc_done(struct fc_disc *disc)
+@@ -479,7 +479,7 @@
+ }
+ /**
+- * fc_disc_error() - Handle error on dNS request
++ * fc_disc_error - Handle error on dNS request
+  * @disc: FC discovery context
+  * @fp: The frame pointer
+  */
+@@ -519,7 +519,7 @@
+ }
+ /**
+- * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request
++ * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request
+  * @lport: FC discovery context
+  *
+  * Locking Note: This function expects that the disc_mutex is locked
+@@ -553,7 +553,7 @@
+ }
+ /**
+- * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request
++ * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request
+  * @lport: Fibre Channel host port instance
+  * @buf: GPN_FT response buffer
+  * @len: size of response buffer
+@@ -617,7 +617,7 @@
+               if ((dp.ids.port_id != fc_host_port_id(lport->host)) &&
+                   (dp.ids.port_name != lport->wwpn)) {
+-                      rport = lport->tt.rport_create(&dp);
++                      rport = fc_rport_rogue_create(&dp);
+                       if (rport) {
+                               rdata = rport->dd_data;
+                               rdata->ops = &fc_disc_rport_ops;
+@@ -658,10 +658,7 @@
+       return error;
+ }
+-/**
+- * fc_disc_timeout() - Retry handler for the disc component
+- * @work: Structure holding disc obj that needs retry discovery
+- *
++/*
+  * Handle retry of memory allocation for remote ports.
+  */
+ static void fc_disc_timeout(struct work_struct *work)
+@@ -676,7 +673,7 @@
+ }
+ /**
+- * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT)
++ * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT)
+  * @sp: Current sequence of GPN_FT exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel host port instance
+@@ -715,7 +712,9 @@
+                              fr_len(fp));
+               } else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
+-                      /* Accepted, parse the response. */
++                      /*
++                       * Accepted.  Parse response.
++                       */
+                       buf = cp + 1;
+                       len -= sizeof(*cp);
+               } else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
+@@ -747,7 +746,7 @@
+ }
+ /**
+- * fc_disc_single() - Discover the directory information for a single target
++ * fc_disc_single - Discover the directory information for a single target
+  * @lport: FC local port
+  * @dp: The port to rediscover
+  *
+@@ -770,7 +769,7 @@
+       if (rport)
+               fc_disc_del_target(disc, rport);
+-      new_rport = lport->tt.rport_create(dp);
++      new_rport = fc_rport_rogue_create(dp);
+       if (new_rport) {
+               rdata = new_rport->dd_data;
+               rdata->ops = &fc_disc_rport_ops;
+@@ -783,7 +782,7 @@
+ }
+ /**
+- * fc_disc_stop() - Stop discovery for a given lport
++ * fc_disc_stop - Stop discovery for a given lport
+  * @lport: The lport that discovery should stop for
+  */
+ void fc_disc_stop(struct fc_lport *lport)
+@@ -797,7 +796,7 @@
+ }
+ /**
+- * fc_disc_stop_final() - Stop discovery for a given lport
++ * fc_disc_stop_final - Stop discovery for a given lport
+  * @lport: The lport that discovery should stop for
+  *
+  * This function will block until discovery has been
+@@ -810,7 +809,7 @@
+ }
+ /**
+- * fc_disc_init() - Initialize the discovery block
++ * fc_disc_init - Initialize the discovery block
+  * @lport: FC local port
+  */
+ int fc_disc_init(struct fc_lport *lport)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libfc/fc_exch.c linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_exch.c
+--- linux-2.6.29.owrt/drivers/scsi/libfc/fc_exch.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_exch.c 2009-05-10 23:48:29.000000000 +0200
+@@ -32,6 +32,8 @@
+ #include <scsi/libfc.h>
+ #include <scsi/fc_encode.h>
++#define         FC_DEF_R_A_TOV      (10 * 1000) /* resource allocation timeout */
++
+ /*
+  * fc_exch_debug can be set in debugger or at compile time to get more logs.
+  */
+@@ -625,6 +627,7 @@
+ {
+       struct fc_exch *ep;
+       struct fc_frame_header *fh;
++      u16 rxid;
+       ep = mp->lp->tt.exch_get(mp->lp, fp);
+       if (ep) {
+@@ -651,6 +654,18 @@
+               if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0)
+                       ep->esb_stat &= ~ESB_ST_SEQ_INIT;
++              /*
++               * Set the responder ID in the frame header.
++               * The old one should've been 0xffff.
++               * If it isn't, don't assign one.
++               * Incoming basic link service frames may specify
++               * a referenced RX_ID.
++               */
++              if (fh->fh_type != FC_TYPE_BLS) {
++                      rxid = ntohs(fh->fh_rx_id);
++                      WARN_ON(rxid != FC_XID_UNKNOWN);
++                      fh->fh_rx_id = htons(ep->rxid);
++              }
+               fc_exch_hold(ep);       /* hold for caller */
+               spin_unlock_bh(&ep->ex_lock);   /* lock from exch_get */
+       }
+@@ -662,8 +677,8 @@
+  * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold
+  * on the ep that should be released by the caller.
+  */
+-static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp,
+-                                               struct fc_frame *fp)
++static enum fc_pf_rjt_reason
++fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp)
+ {
+       struct fc_frame_header *fh = fc_frame_header_get(fp);
+       struct fc_exch *ep = NULL;
+@@ -981,9 +996,9 @@
+  * Send BLS Reject.
+  * This is for rejecting BA_ABTS only.
+  */
+-static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp,
+-                              enum fc_ba_rjt_reason reason,
+-                              enum fc_ba_rjt_explan explan)
++static void
++fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason,
++                  enum fc_ba_rjt_explan explan)
+ {
+       struct fc_frame *fp;
+       struct fc_frame_header *rx_fh;
+@@ -1081,7 +1096,7 @@
+               ap->ba_high_seq_cnt = fh->fh_seq_cnt;
+               ap->ba_low_seq_cnt = htons(sp->cnt);
+       }
+-      sp = fc_seq_start_next_locked(sp);
++      sp = fc_seq_start_next(sp);
+       spin_unlock_bh(&ep->ex_lock);
+       fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS);
+       fc_frame_free(rx_fp);
+@@ -1465,11 +1480,10 @@
+  * If sid is non-zero, reset only exchanges we source from that FID.
+  * If did is non-zero, reset only exchanges destined to that FID.
+  */
+-void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
++void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did)
+ {
+       struct fc_exch *ep;
+       struct fc_exch *next;
+-      struct fc_exch_mgr *mp = lp->emp;
+       spin_lock_bh(&mp->em_lock);
+ restart:
+@@ -1593,7 +1607,7 @@
+       if (IS_ERR(fp)) {
+               int err = PTR_ERR(fp);
+-              if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
++              if (err == -FC_EX_CLOSED)
+                       goto cleanup;
+               FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
+               return;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libfc/fc_fcp.c linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_fcp.c
+--- linux-2.6.29.owrt/drivers/scsi/libfc/fc_fcp.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_fcp.c  2009-05-10 23:48:29.000000000 +0200
+@@ -161,7 +161,7 @@
+ }
+ /**
+- * fc_fcp_pkt_release() - release hold on scsi_pkt packet
++ * fc_fcp_pkt_release - release hold on scsi_pkt packet
+  * @fsp:      fcp packet struct
+  *
+  * This is used by upper layer scsi driver.
+@@ -183,7 +183,8 @@
+ }
+ /**
+- * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
++ * fc_fcp_pkt_destory - release hold on scsi_pkt packet
++ *
+  * @seq:              exchange sequence
+  * @fsp:      fcp packet struct
+  *
+@@ -198,7 +199,7 @@
+ }
+ /**
+- * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
++ * fc_fcp_lock_pkt - lock a packet and get a ref to it.
+  * @fsp:      fcp packet
+  *
+  * We should only return error if we return a command to scsi-ml before
+@@ -290,7 +291,9 @@
+       buf = fc_frame_payload_get(fp, 0);
+       if (offset + len > fsp->data_len) {
+-              /* this should never happen */
++              /*
++               * this should never happen
++               */
+               if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
+                   fc_frame_crc_check(fp))
+                       goto crc_err;
+@@ -384,8 +387,8 @@
+               fc_fcp_complete_locked(fsp);
+ }
+-/**
+- * fc_fcp_send_data() -  Send SCSI data to target.
++/*
++ * fc_fcp_send_data -  Send SCSI data to target.
+  * @fsp: ptr to fc_fcp_pkt
+  * @sp: ptr to this sequence
+  * @offset: starting offset for this data request
+@@ -607,8 +610,8 @@
+       }
+ }
+-/**
+- * fc_fcp_reduce_can_queue() - drop can_queue
++/*
++ * fc_fcp_reduce_can_queue - drop can_queue
+  * @lp: lport to drop queueing for
+  *
+  * If we are getting memory allocation failures, then we may
+@@ -639,11 +642,9 @@
+       spin_unlock_irqrestore(lp->host->host_lock, flags);
+ }
+-/**
+- * fc_fcp_recv() - Reveive FCP frames
+- * @seq: The sequence the frame is on
+- * @fp: The FC frame
+- * @arg: The related FCP packet
++/*
++ * exch mgr calls this routine to process scsi
++ * exchanges.
+  *
+  * Return   : None
+  * Context  : called from Soft IRQ context
+@@ -831,7 +832,7 @@
+ }
+ /**
+- * fc_fcp_complete_locked() - complete processing of a fcp packet
++ * fc_fcp_complete_locked - complete processing of a fcp packet
+  * @fsp:      fcp packet
+  *
+  * This function may sleep if a timer is pending. The packet lock must be
+@@ -899,7 +900,7 @@
+ }
+ /**
+- * fc_fcp_cleanup_each_cmd() - Cleanup active commads
++ * fc_fcp_cleanup_each_cmd - run fn on each active command
+  * @lp:               logical port
+  * @id:               target id
+  * @lun:      lun
+@@ -951,7 +952,7 @@
+ }
+ /**
+- * fc_fcp_pkt_send() - send a fcp packet to the lower level.
++ * fc_fcp_pkt_send - send a fcp packet to the lower level.
+  * @lp:               fc lport
+  * @fsp:      fc packet.
+  *
+@@ -1620,7 +1621,7 @@
+ static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
+ {
+       /* lock ? */
+-      return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
++      return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP);
+ }
+ /**
+@@ -1726,7 +1727,7 @@
+ EXPORT_SYMBOL(fc_queuecommand);
+ /**
+- * fc_io_compl() -  Handle responses for completed commands
++ * fc_io_compl -  Handle responses for completed commands
+  * @fsp:      scsi packet
+  *
+  * Translates a error to a Linux SCSI error.
+@@ -1809,12 +1810,12 @@
+               sc_cmd->result = DID_ERROR << 16;
+               break;
+       case FC_DATA_UNDRUN:
+-              if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
++              if (fsp->cdb_status == 0) {
+                       /*
+                        * scsi status is good but transport level
+-                       * underrun.
++                       * underrun. for read it should be an error??
+                        */
+-                      sc_cmd->result = DID_OK << 16;
++                      sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
+               } else {
+                       /*
+                        * scsi got underrun, this is an error
+@@ -1856,7 +1857,7 @@
+ }
+ /**
+- * fc_fcp_complete() - complete processing of a fcp packet
++ * fc_fcp_complete - complete processing of a fcp packet
+  * @fsp:      fcp packet
+  *
+  * This function may sleep if a fsp timer is pending.
+@@ -1873,10 +1874,9 @@
+ EXPORT_SYMBOL(fc_fcp_complete);
+ /**
+- * fc_eh_abort() - Abort a command
++ * fc_eh_abort - Abort a command...from scsi host template
+  * @sc_cmd:   scsi command to abort
+  *
+- * From scsi host template.
+  * send ABTS to the target device  and wait for the response
+  * sc_cmd is the pointer to the command to be aborted.
+  */
+@@ -1890,7 +1890,7 @@
+       lp = shost_priv(sc_cmd->device->host);
+       if (lp->state != LPORT_ST_READY)
+               return rc;
+-      else if (!lp->link_up)
++      else if (!(lp->link_status & FC_LINK_UP))
+               return rc;
+       spin_lock_irqsave(lp->host->host_lock, flags);
+@@ -1920,7 +1920,7 @@
+ EXPORT_SYMBOL(fc_eh_abort);
+ /**
+- * fc_eh_device_reset() Reset a single LUN
++ * fc_eh_device_reset: Reset a single LUN
+  * @sc_cmd:   scsi command
+  *
+  * Set from scsi host template to send tm cmd to the target and wait for the
+@@ -1973,7 +1973,7 @@
+ EXPORT_SYMBOL(fc_eh_device_reset);
+ /**
+- * fc_eh_host_reset() - The reset function will reset the ports on the host.
++ * fc_eh_host_reset - The reset function will reset the ports on the host.
+  * @sc_cmd:   scsi command
+  */
+ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
+@@ -1999,7 +1999,7 @@
+ EXPORT_SYMBOL(fc_eh_host_reset);
+ /**
+- * fc_slave_alloc() - configure queue depth
++ * fc_slave_alloc - configure queue depth
+  * @sdev:     scsi device
+  *
+  * Configures queue depth based on host's cmd_per_len. If not set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libfc/fc_lport.c linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_lport.c
+--- linux-2.6.29.owrt/drivers/scsi/libfc/fc_lport.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_lport.c        2009-05-10 23:48:29.000000000 +0200
+@@ -139,7 +139,7 @@
+ }
+ /**
+- * fc_lport_rport_callback() - Event handler for rport events
++ * fc_lport_rport_callback - Event handler for rport events
+  * @lport: The lport which is receiving the event
+  * @rport: The rport which the event has occured on
+  * @event: The event that occured
+@@ -195,7 +195,7 @@
+ }
+ /**
+- * fc_lport_state() - Return a string which represents the lport's state
++ * fc_lport_state - Return a string which represents the lport's state
+  * @lport: The lport whose state is to converted to a string
+  */
+ static const char *fc_lport_state(struct fc_lport *lport)
+@@ -209,7 +209,7 @@
+ }
+ /**
+- * fc_lport_ptp_setup() - Create an rport for point-to-point mode
++ * fc_lport_ptp_setup - Create an rport for point-to-point mode
+  * @lport: The lport to attach the ptp rport to
+  * @fid: The FID of the ptp rport
+  * @remote_wwpn: The WWPN of the ptp rport
+@@ -232,7 +232,7 @@
+               lport->ptp_rp = NULL;
+       }
+-      lport->ptp_rp = lport->tt.rport_create(&dp);
++      lport->ptp_rp = fc_rport_rogue_create(&dp);
+       lport->tt.rport_login(lport->ptp_rp);
+@@ -250,7 +250,7 @@
+ {
+       struct fc_lport *lp = shost_priv(shost);
+-      if (lp->link_up)
++      if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP)
+               fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+       else
+               fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
+@@ -351,7 +351,7 @@
+ }
+ /**
+- * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
++ * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report.
+  * @lport: Fibre Channel local port recieving the RLIR
+  * @sp: current sequence in the RLIR exchange
+  * @fp: RLIR request frame
+@@ -370,7 +370,7 @@
+ }
+ /**
+- * fc_lport_recv_echo_req() - Handle received ECHO request
++ * fc_lport_recv_echo_req - Handle received ECHO request
+  * @lport: Fibre Channel local port recieving the ECHO
+  * @sp: current sequence in the ECHO exchange
+  * @fp: ECHO request frame
+@@ -412,7 +412,7 @@
+ }
+ /**
+- * fc_lport_recv_echo_req() - Handle received Request Node ID data request
++ * fc_lport_recv_echo_req - Handle received Request Node ID data request
+  * @lport: Fibre Channel local port recieving the RNID
+  * @sp: current sequence in the RNID exchange
+  * @fp: RNID request frame
+@@ -479,7 +479,7 @@
+ }
+ /**
+- * fc_lport_recv_adisc_req() - Handle received Address Discovery Request
++ * fc_lport_recv_adisc_req - Handle received Address Discovery Request
+  * @lport: Fibre Channel local port recieving the ADISC
+  * @sp: current sequence in the ADISC exchange
+  * @fp: ADISC request frame
+@@ -529,7 +529,7 @@
+ }
+ /**
+- * fc_lport_recv_logo_req() - Handle received fabric LOGO request
++ * fc_lport_recv_logo_req - Handle received fabric LOGO request
+  * @lport: Fibre Channel local port recieving the LOGO
+  * @sp: current sequence in the LOGO exchange
+  * @fp: LOGO request frame
+@@ -546,7 +546,7 @@
+ }
+ /**
+- * fc_fabric_login() - Start the lport state machine
++ * fc_fabric_login - Start the lport state machine
+  * @lport: The lport that should log into the fabric
+  *
+  * Locking Note: This function should not be called
+@@ -568,7 +568,7 @@
+ EXPORT_SYMBOL(fc_fabric_login);
+ /**
+- * fc_linkup() - Handler for transport linkup events
++ * fc_linkup - Handler for transport linkup events
+  * @lport: The lport whose link is up
+  */
+ void fc_linkup(struct fc_lport *lport)
+@@ -577,8 +577,8 @@
+                      fc_host_port_id(lport->host));
+       mutex_lock(&lport->lp_mutex);
+-      if (!lport->link_up) {
+-              lport->link_up = 1;
++      if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) {
++              lport->link_status |= FC_LINK_UP;
+               if (lport->state == LPORT_ST_RESET)
+                       fc_lport_enter_flogi(lport);
+@@ -588,7 +588,7 @@
+ EXPORT_SYMBOL(fc_linkup);
+ /**
+- * fc_linkdown() - Handler for transport linkdown events
++ * fc_linkdown - Handler for transport linkdown events
+  * @lport: The lport whose link is down
+  */
+ void fc_linkdown(struct fc_lport *lport)
+@@ -597,8 +597,8 @@
+       FC_DEBUG_LPORT("Link is down for port (%6x)\n",
+                      fc_host_port_id(lport->host));
+-      if (lport->link_up) {
+-              lport->link_up = 0;
++      if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) {
++              lport->link_status &= ~(FC_LINK_UP);
+               fc_lport_enter_reset(lport);
+               lport->tt.fcp_cleanup(lport);
+       }
+@@ -607,25 +607,48 @@
+ EXPORT_SYMBOL(fc_linkdown);
+ /**
+- * fc_fabric_logoff() - Logout of the fabric
++ * fc_pause - Pause the flow of frames
++ * @lport: The lport to be paused
++ */
++void fc_pause(struct fc_lport *lport)
++{
++      mutex_lock(&lport->lp_mutex);
++      lport->link_status |= FC_PAUSE;
++      mutex_unlock(&lport->lp_mutex);
++}
++EXPORT_SYMBOL(fc_pause);
++
++/**
++ * fc_unpause - Unpause the flow of frames
++ * @lport: The lport to be unpaused
++ */
++void fc_unpause(struct fc_lport *lport)
++{
++      mutex_lock(&lport->lp_mutex);
++      lport->link_status &= ~(FC_PAUSE);
++      mutex_unlock(&lport->lp_mutex);
++}
++EXPORT_SYMBOL(fc_unpause);
++
++/**
++ * fc_fabric_logoff - Logout of the fabric
+  * @lport:          fc_lport pointer to logoff the fabric
+  *
+  * Return value:
+  *    0 for success, -1 for failure
+- */
++ **/
+ int fc_fabric_logoff(struct fc_lport *lport)
+ {
+       lport->tt.disc_stop_final(lport);
+       mutex_lock(&lport->lp_mutex);
+       fc_lport_enter_logo(lport);
+       mutex_unlock(&lport->lp_mutex);
+-      cancel_delayed_work_sync(&lport->retry_work);
+       return 0;
+ }
+ EXPORT_SYMBOL(fc_fabric_logoff);
+ /**
+- * fc_lport_destroy() - unregister a fc_lport
++ * fc_lport_destroy - unregister a fc_lport
+  * @lport:          fc_lport pointer to unregister
+  *
+  * Return value:
+@@ -635,25 +658,26 @@
+  * clean-up all the allocated memory
+  * and free up other system resources.
+  *
+- */
++ **/
+ int fc_lport_destroy(struct fc_lport *lport)
+ {
+       lport->tt.frame_send = fc_frame_drop;
+       lport->tt.fcp_abort_io(lport);
+-      lport->tt.exch_mgr_reset(lport, 0, 0);
++      lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+       return 0;
+ }
+ EXPORT_SYMBOL(fc_lport_destroy);
+ /**
+- * fc_set_mfs() - sets up the mfs for the corresponding fc_lport
++ * fc_set_mfs - sets up the mfs for the corresponding fc_lport
+  * @lport: fc_lport pointer to unregister
+  * @mfs: the new mfs for fc_lport
+  *
+  * Set mfs for the given fc_lport to the new mfs.
+  *
+  * Return: 0 for success
+- */
++ *
++ **/
+ int fc_set_mfs(struct fc_lport *lport, u32 mfs)
+ {
+       unsigned int old_mfs;
+@@ -682,7 +706,7 @@
+ EXPORT_SYMBOL(fc_set_mfs);
+ /**
+- * fc_lport_disc_callback() - Callback for discovery events
++ * fc_lport_disc_callback - Callback for discovery events
+  * @lport: FC local port
+  * @event: The discovery event
+  */
+@@ -707,7 +731,7 @@
+ }
+ /**
+- * fc_rport_enter_ready() - Enter the ready state and start discovery
++ * fc_rport_enter_ready - Enter the ready state and start discovery
+  * @lport: Fibre Channel local port that is ready
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -724,7 +748,7 @@
+ }
+ /**
+- * fc_lport_recv_flogi_req() - Receive a FLOGI request
++ * fc_lport_recv_flogi_req - Receive a FLOGI request
+  * @sp_in: The sequence the FLOGI is on
+  * @rx_fp: The frame the FLOGI is in
+  * @lport: The lport that recieved the request
+@@ -814,7 +838,7 @@
+ }
+ /**
+- * fc_lport_recv_req() - The generic lport request handler
++ * fc_lport_recv_req - The generic lport request handler
+  * @lport: The lport that received the request
+  * @sp: The sequence the request is on
+  * @fp: The frame the request is in
+@@ -910,7 +934,7 @@
+ }
+ /**
+- * fc_lport_reset() - Reset an lport
++ * fc_lport_reset - Reset an lport
+  * @lport: The lport which should be reset
+  *
+  * Locking Note: This functions should not be called with the
+@@ -918,7 +942,6 @@
+  */
+ int fc_lport_reset(struct fc_lport *lport)
+ {
+-      cancel_delayed_work_sync(&lport->retry_work);
+       mutex_lock(&lport->lp_mutex);
+       fc_lport_enter_reset(lport);
+       mutex_unlock(&lport->lp_mutex);
+@@ -927,7 +950,7 @@
+ EXPORT_SYMBOL(fc_lport_reset);
+ /**
+- * fc_rport_enter_reset() - Reset the local port
++ * fc_rport_enter_reset - Reset the local port
+  * @lport: Fibre Channel local port to be reset
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -950,16 +973,16 @@
+       lport->tt.disc_stop(lport);
+-      lport->tt.exch_mgr_reset(lport, 0, 0);
++      lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+       fc_host_fabric_name(lport->host) = 0;
+       fc_host_port_id(lport->host) = 0;
+-      if (lport->link_up)
++      if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP)
+               fc_lport_enter_flogi(lport);
+ }
+ /**
+- * fc_lport_error() - Handler for any errors
++ * fc_lport_error - Handler for any errors
+  * @lport: The fc_lport object
+  * @fp: The frame pointer
+  *
+@@ -1006,8 +1029,8 @@
+ }
+ /**
+- * fc_lport_rft_id_resp() - Handle response to Register Fibre
+- *                        Channel Types by ID (RPN_ID) request
++ * fc_lport_rft_id_resp - Handle response to Register Fibre
++ *                      Channel Types by ID (RPN_ID) request
+  * @sp: current sequence in RPN_ID exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel host port instance
+@@ -1030,17 +1053,17 @@
+       FC_DEBUG_LPORT("Received a RFT_ID response\n");
+-      if (IS_ERR(fp)) {
+-              fc_lport_error(lport, fp);
+-              goto err;
+-      }
+-
+       if (lport->state != LPORT_ST_RFT_ID) {
+               FC_DBG("Received a RFT_ID response, but in state %s\n",
+                      fc_lport_state(lport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_lport_error(lport, fp);
++              goto err;
++      }
++
+       fh = fc_frame_header_get(fp);
+       ct = fc_frame_payload_get(fp, sizeof(*ct));
+@@ -1058,8 +1081,8 @@
+ }
+ /**
+- * fc_lport_rpn_id_resp() - Handle response to Register Port
+- *                        Name by ID (RPN_ID) request
++ * fc_lport_rpn_id_resp - Handle response to Register Port
++ *                      Name by ID (RPN_ID) request
+  * @sp: current sequence in RPN_ID exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel host port instance
+@@ -1082,17 +1105,17 @@
+       FC_DEBUG_LPORT("Received a RPN_ID response\n");
+-      if (IS_ERR(fp)) {
+-              fc_lport_error(lport, fp);
+-              goto err;
+-      }
+-
+       if (lport->state != LPORT_ST_RPN_ID) {
+               FC_DBG("Received a RPN_ID response, but in state %s\n",
+                      fc_lport_state(lport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_lport_error(lport, fp);
++              goto err;
++      }
++
+       fh = fc_frame_header_get(fp);
+       ct = fc_frame_payload_get(fp, sizeof(*ct));
+       if (fh && ct && fh->fh_type == FC_TYPE_CT &&
+@@ -1110,7 +1133,7 @@
+ }
+ /**
+- * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request
++ * fc_lport_scr_resp - Handle response to State Change Register (SCR) request
+  * @sp: current sequence in SCR exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel lport port instance that sent the registration request
+@@ -1132,17 +1155,17 @@
+       FC_DEBUG_LPORT("Received a SCR response\n");
+-      if (IS_ERR(fp)) {
+-              fc_lport_error(lport, fp);
+-              goto err;
+-      }
+-
+       if (lport->state != LPORT_ST_SCR) {
+               FC_DBG("Received a SCR response, but in state %s\n",
+                      fc_lport_state(lport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_lport_error(lport, fp);
++              goto err;
++      }
++
+       op = fc_frame_payload_op(fp);
+       if (op == ELS_LS_ACC)
+               fc_lport_enter_ready(lport);
+@@ -1156,7 +1179,7 @@
+ }
+ /**
+- * fc_lport_enter_scr() - Send a State Change Register (SCR) request
++ * fc_lport_enter_scr - Send a State Change Register (SCR) request
+  * @lport: Fibre Channel local port to register for state changes
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -1183,7 +1206,7 @@
+ }
+ /**
+- * fc_lport_enter_rft_id() - Register FC4-types with the name server
++ * fc_lport_enter_rft_id - Register FC4-types with the name server
+  * @lport: Fibre Channel local port to register
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -1225,7 +1248,7 @@
+ }
+ /**
+- * fc_rport_enter_rft_id() - Register port name with the name server
++ * fc_rport_enter_rft_id - Register port name with the name server
+  * @lport: Fibre Channel local port to register
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -1258,7 +1281,7 @@
+ };
+ /**
+- * fc_rport_enter_dns() - Create a rport to the name server
++ * fc_rport_enter_dns - Create a rport to the name server
+  * @lport: Fibre Channel local port requesting a rport for the name server
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -1281,7 +1304,7 @@
+       fc_lport_state_enter(lport, LPORT_ST_DNS);
+-      rport = lport->tt.rport_create(&dp);
++      rport = fc_rport_rogue_create(&dp);
+       if (!rport)
+               goto err;
+@@ -1295,7 +1318,7 @@
+ }
+ /**
+- * fc_lport_timeout() - Handler for the retry_work timer.
++ * fc_lport_timeout - Handler for the retry_work timer.
+  * @work: The work struct of the fc_lport
+  */
+ static void fc_lport_timeout(struct work_struct *work)
+@@ -1336,7 +1359,7 @@
+ }
+ /**
+- * fc_lport_logo_resp() - Handle response to LOGO request
++ * fc_lport_logo_resp - Handle response to LOGO request
+  * @sp: current sequence in LOGO exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel lport port instance that sent the LOGO request
+@@ -1358,17 +1381,17 @@
+       FC_DEBUG_LPORT("Received a LOGO response\n");
+-      if (IS_ERR(fp)) {
+-              fc_lport_error(lport, fp);
+-              goto err;
+-      }
+-
+       if (lport->state != LPORT_ST_LOGO) {
+               FC_DBG("Received a LOGO response, but in state %s\n",
+                      fc_lport_state(lport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_lport_error(lport, fp);
++              goto err;
++      }
++
+       op = fc_frame_payload_op(fp);
+       if (op == ELS_LS_ACC)
+               fc_lport_enter_reset(lport);
+@@ -1382,7 +1405,7 @@
+ }
+ /**
+- * fc_rport_enter_logo() - Logout of the fabric
++ * fc_rport_enter_logo - Logout of the fabric
+  * @lport: Fibre Channel local port to be logged out
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+@@ -1414,7 +1437,7 @@
+ }
+ /**
+- * fc_lport_flogi_resp() - Handle response to FLOGI request
++ * fc_lport_flogi_resp - Handle response to FLOGI request
+  * @sp: current sequence in FLOGI exchange
+  * @fp: response frame
+  * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request
+@@ -1442,17 +1465,17 @@
+       FC_DEBUG_LPORT("Received a FLOGI response\n");
+-      if (IS_ERR(fp)) {
+-              fc_lport_error(lport, fp);
+-              goto err;
+-      }
+-
+       if (lport->state != LPORT_ST_FLOGI) {
+               FC_DBG("Received a FLOGI response, but in state %s\n",
+                      fc_lport_state(lport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_lport_error(lport, fp);
++              goto err;
++      }
++
+       fh = fc_frame_header_get(fp);
+       did = ntoh24(fh->fh_d_id);
+       if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
+@@ -1509,7 +1532,7 @@
+ }
+ /**
+- * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager
++ * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager
+  * @lport: Fibre Channel local port to be logged in to the fabric
+  *
+  * Locking Note: The lport lock is expected to be held before calling
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libfc/fc_rport.c linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_rport.c
+--- linux-2.6.29.owrt/drivers/scsi/libfc/fc_rport.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libfc/fc_rport.c        2009-05-10 23:48:29.000000000 +0200
+@@ -81,7 +81,6 @@
+                                  struct fc_seq *, struct fc_frame *);
+ static void fc_rport_timeout(struct work_struct *);
+ static void fc_rport_error(struct fc_rport *, struct fc_frame *);
+-static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *);
+ static void fc_rport_work(struct work_struct *);
+ static const char *fc_rport_state_names[] = {
+@@ -146,7 +145,7 @@
+ }
+ /**
+- * fc_rport_state() - return a string for the state the rport is in
++ * fc_rport_state - return a string for the state the rport is in
+  * @rport: The rport whose state we want to get a string for
+  */
+ static const char *fc_rport_state(struct fc_rport *rport)
+@@ -161,7 +160,7 @@
+ }
+ /**
+- * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
++ * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds.
+  * @rport: Pointer to Fibre Channel remote port structure
+  * @timeout: timeout in seconds
+  */
+@@ -175,12 +174,12 @@
+ EXPORT_SYMBOL(fc_set_rport_loss_tmo);
+ /**
+- * fc_plogi_get_maxframe() - Get max payload from the common service parameters
++ * fc_plogi_get_maxframe - Get max payload from the common service parameters
+  * @flp: FLOGI payload structure
+  * @maxval: upper limit, may be less than what is in the service parameters
+  */
+-static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
+-                                        unsigned int maxval)
++static unsigned int
++fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval)
+ {
+       unsigned int mfs;
+@@ -198,7 +197,7 @@
+ }
+ /**
+- * fc_rport_state_enter() - Change the rport's state
++ * fc_rport_state_enter - Change the rport's state
+  * @rport: The rport whose state should change
+  * @new: The new state of the rport
+  *
+@@ -215,7 +214,6 @@
+ static void fc_rport_work(struct work_struct *work)
+ {
+-      u32 port_id;
+       struct fc_rport_libfc_priv *rdata =
+               container_of(work, struct fc_rport_libfc_priv, event_work);
+       enum fc_rport_event event;
+@@ -281,18 +279,14 @@
+                       rport_ops->event_callback(lport, rport, event);
+               if (trans_state == FC_PORTSTATE_ROGUE)
+                       put_device(&rport->dev);
+-              else {
+-                      port_id = rport->port_id;
++              else
+                       fc_remote_port_delete(rport);
+-                      lport->tt.exch_mgr_reset(lport, 0, port_id);
+-                      lport->tt.exch_mgr_reset(lport, port_id, 0);
+-              }
+       } else
+               mutex_unlock(&rdata->rp_mutex);
+ }
+ /**
+- * fc_rport_login() - Start the remote port login state machine
++ * fc_rport_login - Start the remote port login state machine
+  * @rport: Fibre Channel remote port
+  *
+  * Locking Note: Called without the rport lock held. This
+@@ -315,7 +309,7 @@
+ }
+ /**
+- * fc_rport_logoff() - Logoff and remove an rport
++ * fc_rport_logoff - Logoff and remove an rport
+  * @rport: Fibre Channel remote port to be removed
+  *
+  * Locking Note: Called without the rport lock held. This
+@@ -353,7 +347,7 @@
+ }
+ /**
+- * fc_rport_enter_ready() - The rport is ready
++ * fc_rport_enter_ready - The rport is ready
+  * @rport: Fibre Channel remote port that is ready
+  *
+  * Locking Note: The rport lock is expected to be held before calling
+@@ -372,7 +366,7 @@
+ }
+ /**
+- * fc_rport_timeout() - Handler for the retry_work timer.
++ * fc_rport_timeout - Handler for the retry_work timer.
+  * @work: The work struct of the fc_rport_libfc_priv
+  *
+  * Locking Note: Called without the rport lock held. This
+@@ -411,75 +405,59 @@
+ }
+ /**
+- * fc_rport_error() - Error handler, called once retries have been exhausted
++ * fc_rport_error - Handler for any errors
+  * @rport: The fc_rport object
+  * @fp: The frame pointer
+  *
++ * If the error was caused by a resource allocation failure
++ * then wait for half a second and retry, otherwise retry
++ * immediately.
++ *
+  * Locking Note: The rport lock is expected to be held before
+  * calling this routine
+  */
+ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
+ {
+       struct fc_rport_libfc_priv *rdata = rport->dd_data;
++      unsigned long delay = 0;
+       FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
+                      PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
+-      switch (rdata->rp_state) {
+-      case RPORT_ST_PLOGI:
+-      case RPORT_ST_PRLI:
+-      case RPORT_ST_LOGO:
+-              rdata->event = RPORT_EV_FAILED;
+-              queue_work(rport_event_queue,
+-                         &rdata->event_work);
+-              break;
+-      case RPORT_ST_RTV:
+-              fc_rport_enter_ready(rport);
+-              break;
+-      case RPORT_ST_NONE:
+-      case RPORT_ST_READY:
+-      case RPORT_ST_INIT:
+-              break;
+-      }
+-}
+-
+-/**
+- * fc_rport_error_retry() - Error handler when retries are desired
+- * @rport: The fc_rport object
+- * @fp: The frame pointer
+- *
+- * If the error was an exchange timeout retry immediately,
+- * otherwise wait for E_D_TOV.
+- *
+- * Locking Note: The rport lock is expected to be held before
+- * calling this routine
+- */
+-static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
+-{
+-      struct fc_rport_libfc_priv *rdata = rport->dd_data;
+-      unsigned long delay = FC_DEF_E_D_TOV;
+-
+-      /* make sure this isn't an FC_EX_CLOSED error, never retry those */
+-      if (PTR_ERR(fp) == -FC_EX_CLOSED)
+-              return fc_rport_error(rport, fp);
+-
+-      if (rdata->retries < rdata->local_port->max_retry_count) {
+-              FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
+-                             PTR_ERR(fp), fc_rport_state(rport));
+-              rdata->retries++;
+-              /* no additional delay on exchange timeouts */
+-              if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
+-                      delay = 0;
+-              get_device(&rport->dev);
+-              schedule_delayed_work(&rdata->retry_work, delay);
+-              return;
++      if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
++              /*
++               * Memory allocation failure, or the exchange timed out.
++               *  Retry after delay
++               */
++              if (rdata->retries < rdata->local_port->max_retry_count) {
++                      rdata->retries++;
++                      if (!fp)
++                              delay = msecs_to_jiffies(500);
++                      get_device(&rport->dev);
++                      schedule_delayed_work(&rdata->retry_work, delay);
++              } else {
++                      switch (rdata->rp_state) {
++                      case RPORT_ST_PLOGI:
++                      case RPORT_ST_PRLI:
++                      case RPORT_ST_LOGO:
++                              rdata->event = RPORT_EV_FAILED;
++                              queue_work(rport_event_queue,
++                                         &rdata->event_work);
++                              break;
++                      case RPORT_ST_RTV:
++                              fc_rport_enter_ready(rport);
++                              break;
++                      case RPORT_ST_NONE:
++                      case RPORT_ST_READY:
++                      case RPORT_ST_INIT:
++                              break;
++                      }
++              }
+       }
+-
+-      return fc_rport_error(rport, fp);
+ }
+ /**
+- * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
++ * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response
+  * @sp: current sequence in the PLOGI exchange
+  * @fp: response frame
+  * @rp_arg: Fibre Channel remote port
+@@ -505,17 +483,17 @@
+       FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
+                      rport->port_id);
+-      if (IS_ERR(fp)) {
+-              fc_rport_error_retry(rport, fp);
+-              goto err;
+-      }
+-
+       if (rdata->rp_state != RPORT_ST_PLOGI) {
+               FC_DBG("Received a PLOGI response, but in state %s\n",
+                      fc_rport_state(rport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_rport_error(rport, fp);
++              goto err;
++      }
++
+       op = fc_frame_payload_op(fp);
+       if (op == ELS_LS_ACC &&
+           (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
+@@ -544,7 +522,7 @@
+               else
+                       fc_rport_enter_prli(rport);
+       } else
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+ out:
+       fc_frame_free(fp);
+@@ -554,7 +532,7 @@
+ }
+ /**
+- * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
++ * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer
+  * @rport: Fibre Channel remote port to send PLOGI to
+  *
+  * Locking Note: The rport lock is expected to be held before calling
+@@ -574,20 +552,20 @@
+       rport->maxframe_size = FC_MIN_MAX_PAYLOAD;
+       fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
+       if (!fp) {
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+               return;
+       }
+       rdata->e_d_tov = lport->e_d_tov;
+       if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI,
+                                 fc_rport_plogi_resp, rport, lport->e_d_tov))
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+       else
+               get_device(&rport->dev);
+ }
+ /**
+- * fc_rport_prli_resp() - Process Login (PRLI) response handler
++ * fc_rport_prli_resp - Process Login (PRLI) response handler
+  * @sp: current sequence in the PRLI exchange
+  * @fp: response frame
+  * @rp_arg: Fibre Channel remote port
+@@ -614,17 +592,17 @@
+       FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
+                      rport->port_id);
+-      if (IS_ERR(fp)) {
+-              fc_rport_error_retry(rport, fp);
+-              goto err;
+-      }
+-
+       if (rdata->rp_state != RPORT_ST_PRLI) {
+               FC_DBG("Received a PRLI response, but in state %s\n",
+                      fc_rport_state(rport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_rport_error(rport, fp);
++              goto err;
++      }
++
+       op = fc_frame_payload_op(fp);
+       if (op == ELS_LS_ACC) {
+               pp = fc_frame_payload_get(fp, sizeof(*pp));
+@@ -657,7 +635,7 @@
+ }
+ /**
+- * fc_rport_logo_resp() - Logout (LOGO) response handler
++ * fc_rport_logo_resp - Logout (LOGO) response handler
+  * @sp: current sequence in the LOGO exchange
+  * @fp: response frame
+  * @rp_arg: Fibre Channel remote port
+@@ -679,7 +657,7 @@
+                      rport->port_id);
+       if (IS_ERR(fp)) {
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+               goto err;
+       }
+@@ -706,7 +684,7 @@
+ }
+ /**
+- * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
++ * fc_rport_enter_prli - Send Process Login (PRLI) request to peer
+  * @rport: Fibre Channel remote port to send PRLI to
+  *
+  * Locking Note: The rport lock is expected to be held before calling
+@@ -729,19 +707,19 @@
+       fp = fc_frame_alloc(lport, sizeof(*pp));
+       if (!fp) {
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+               return;
+       }
+       if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI,
+                                 fc_rport_prli_resp, rport, lport->e_d_tov))
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+       else
+               get_device(&rport->dev);
+ }
+ /**
+- * fc_rport_els_rtv_resp() - Request Timeout Value response handler
++ * fc_rport_els_rtv_resp - Request Timeout Value response handler
+  * @sp: current sequence in the RTV exchange
+  * @fp: response frame
+  * @rp_arg: Fibre Channel remote port
+@@ -764,17 +742,17 @@
+       FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
+                      rport->port_id);
+-      if (IS_ERR(fp)) {
+-              fc_rport_error(rport, fp);
+-              goto err;
+-      }
+-
+       if (rdata->rp_state != RPORT_ST_RTV) {
+               FC_DBG("Received a RTV response, but in state %s\n",
+                      fc_rport_state(rport));
+               goto out;
+       }
++      if (IS_ERR(fp)) {
++              fc_rport_error(rport, fp);
++              goto err;
++      }
++
+       op = fc_frame_payload_op(fp);
+       if (op == ELS_LS_ACC) {
+               struct fc_els_rtv_acc *rtv;
+@@ -807,7 +785,7 @@
+ }
+ /**
+- * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
++ * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer
+  * @rport: Fibre Channel remote port to send RTV to
+  *
+  * Locking Note: The rport lock is expected to be held before calling
+@@ -826,19 +804,19 @@
+       fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
+       if (!fp) {
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+               return;
+       }
+       if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV,
+                                    fc_rport_rtv_resp, rport, lport->e_d_tov))
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+       else
+               get_device(&rport->dev);
+ }
+ /**
+- * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
++ * fc_rport_enter_logo - Send Logout (LOGO) request to peer
+  * @rport: Fibre Channel remote port to send LOGO to
+  *
+  * Locking Note: The rport lock is expected to be held before calling
+@@ -857,20 +835,20 @@
+       fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
+       if (!fp) {
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+               return;
+       }
+       if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO,
+                                 fc_rport_logo_resp, rport, lport->e_d_tov))
+-              fc_rport_error_retry(rport, fp);
++              fc_rport_error(rport, fp);
+       else
+               get_device(&rport->dev);
+ }
+ /**
+- * fc_rport_recv_req() - Receive a request from a rport
++ * fc_rport_recv_req - Receive a request from a rport
+  * @sp: current sequence in the PLOGI exchange
+  * @fp: response frame
+  * @rp_arg: Fibre Channel remote port
+@@ -931,7 +909,7 @@
+ }
+ /**
+- * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
++ * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request
+  * @rport: Fibre Channel remote port that initiated PLOGI
+  * @sp: current sequence in the PLOGI exchange
+  * @fp: PLOGI request frame
+@@ -1053,7 +1031,7 @@
+ }
+ /**
+- * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
++ * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request
+  * @rport: Fibre Channel remote port that initiated PRLI
+  * @sp: current sequence in the PRLI exchange
+  * @fp: PRLI request frame
+@@ -1204,7 +1182,7 @@
+ }
+ /**
+- * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
++ * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request
+  * @rport: Fibre Channel remote port that initiated PRLO
+  * @sp: current sequence in the PRLO exchange
+  * @fp: PRLO request frame
+@@ -1235,7 +1213,7 @@
+ }
+ /**
+- * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
++ * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request
+  * @rport: Fibre Channel remote port that initiated LOGO
+  * @sp: current sequence in the LOGO exchange
+  * @fp: LOGO request frame
+@@ -1271,9 +1249,6 @@
+ int fc_rport_init(struct fc_lport *lport)
+ {
+-      if (!lport->tt.rport_create)
+-              lport->tt.rport_create = fc_rport_rogue_create;
+-
+       if (!lport->tt.rport_login)
+               lport->tt.rport_login = fc_rport_login;
+@@ -1310,7 +1285,7 @@
+       struct fc_rport_libfc_priv *rdata = rport->dd_data;
+       struct fc_lport *lport = rdata->local_port;
+-      lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
+-      lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
++      lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id);
++      lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0);
+ }
+ EXPORT_SYMBOL(fc_rport_terminate_io);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/libiscsi.c linux-2.6.29-rc3.owrt/drivers/scsi/libiscsi.c
+--- linux-2.6.29.owrt/drivers/scsi/libiscsi.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/libiscsi.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1998,8 +1998,6 @@
+       if (!shost->can_queue)
+               shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX;
+-      if (!shost->transportt->eh_timed_out)
+-              shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
+       return scsi_add_host(shost, pdev);
+ }
+ EXPORT_SYMBOL_GPL(iscsi_host_add);
+@@ -2022,6 +2020,7 @@
+       shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size);
+       if (!shost)
+               return NULL;
++      shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
+       if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) {
+               if (qdepth != 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/lpfc/lpfc_els.c linux-2.6.29-rc3.owrt/drivers/scsi/lpfc/lpfc_els.c
+--- linux-2.6.29.owrt/drivers/scsi/lpfc/lpfc_els.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/lpfc/lpfc_els.c 2009-05-10 23:48:29.000000000 +0200
+@@ -5258,7 +5258,6 @@
+                       sizeof(struct lpfc_name));
+               break;
+       default:
+-              kfree(els_data);
+               return;
+       }
+       memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_attr.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_attr.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_attr.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_attr.c      2009-05-10 23:48:29.000000000 +0200
+@@ -244,6 +244,12 @@
+               if (ha->optrom_state != QLA_SWAITING)
+                       break;
++              if (start & 0xfff) {
++                      qla_printk(KERN_WARNING, ha,
++                          "Invalid start region 0x%x/0x%x.\n", start, size);
++                      return -EINVAL;
++              }
++
+               ha->optrom_region_start = start;
+               ha->optrom_region_size = start + size > ha->optrom_size ?
+                   ha->optrom_size - start : size;
+@@ -297,7 +303,8 @@
+               else if (start == (ha->flt_region_boot * 4) ||
+                   start == (ha->flt_region_fw * 4))
+                       valid = 1;
+-              else if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
++              else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) &&
++                  start == (ha->flt_region_vpd_nvram * 4))
+                   valid = 1;
+               if (!valid) {
+                       qla_printk(KERN_WARNING, ha,
+@@ -1258,6 +1265,13 @@
+           test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
+               msleep(1000);
++      if (ha->mqenable) {
++              if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
++                      qla_printk(KERN_WARNING, ha,
++                              "Queue delete failed.\n");
++              vha->req_ques[0] = ha->req_q_map[0]->id;
++      }
++
+       qla24xx_disable_vp(vha);
+       fc_remove_host(vha->host);
+@@ -1279,12 +1293,6 @@
+                   vha->host_no, vha->vp_idx, vha));
+         }
+-      if (ha->mqenable) {
+-              if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+-                      qla_printk(KERN_WARNING, ha,
+-                              "Queue delete failed.\n");
+-      }
+-
+       scsi_host_put(vha->host);
+       qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_def.h linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_def.h
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_def.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_def.h       2009-05-10 23:48:29.000000000 +0200
+@@ -2135,7 +2135,6 @@
+ /* Work events.  */
+ enum qla_work_type {
+       QLA_EVT_AEN,
+-      QLA_EVT_IDC_ACK,
+ };
+@@ -2150,10 +2149,6 @@
+                       enum fc_host_event_code code;
+                       u32 data;
+               } aen;
+-              struct {
+-#define QLA_IDC_ACK_REGS      7
+-                      uint16_t mb[QLA_IDC_ACK_REGS];
+-              } idc_ack;
+       } u;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_devtbl.h linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_devtbl.h
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_devtbl.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_devtbl.h    2009-05-10 23:48:29.000000000 +0200
+@@ -72,7 +72,7 @@
+       "QLA2462",      "Sun PCI-X 2.0 to 4Gb FC, Dual Channel",        /* 0x141 */
+       "QLE2460",      "Sun PCI-Express to 2Gb FC, Single Channel",    /* 0x142 */
+       "QLE2462",      "Sun PCI-Express to 4Gb FC, Single Channel",    /* 0x143 */
+-      "QEM2462",      "Server I/O Module 4Gb FC, Dual Channel",       /* 0x144 */
++      "QEM2462"       "Server I/O Module 4Gb FC, Dual Channel",       /* 0x144 */
+       "QLE2440",      "PCI-Express to 4Gb FC, Single Channel",        /* 0x145 */
+       "QLE2464",      "PCI-Express to 4Gb FC, Quad Channel",          /* 0x146 */
+       "QLA2440",      "PCI-X 2.0 to 4Gb FC, Single Channel",          /* 0x147 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_fw.h linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_fw.h
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_fw.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_fw.h        2009-05-10 23:48:29.000000000 +0200
+@@ -1402,8 +1402,6 @@
+ #define MBA_IDC_NOTIFY                0x8101
+ #define MBA_IDC_TIME_EXT      0x8102
+-#define MBC_IDC_ACK           0x101
+-
+ struct nvram_81xx {
+       /* NVRAM header. */
+       uint8_t id[4];
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_gbl.h linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_gbl.h
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_gbl.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_gbl.h       2009-05-10 23:48:29.000000000 +0200
+@@ -72,7 +72,6 @@
+ extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
+ extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
+     fc_host_event_code, u32);
+-extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *);
+ extern void qla2x00_abort_fcport_cmds(fc_port_t *);
+ extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
+@@ -267,8 +266,6 @@
+ extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *);
+-extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *);
+-
+ /*
+  * Global Function Prototypes in qla_isr.c source file.
+  */
+@@ -379,8 +376,10 @@
+ /* Globa function prototypes for multi-q */
+ extern int qla25xx_request_irq(struct rsp_que *);
+-extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
+-extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
++extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *,
++      uint8_t);
++extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *,
++      uint8_t);
+ extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
+       uint16_t, uint8_t, uint8_t);
+ extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_init.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_init.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_init.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_init.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1226,8 +1226,9 @@
+                       icb->firmware_options_2 |=
+                               __constant_cpu_to_le32(BIT_18);
+-              icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
++              icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22);
+               icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);
++              ha->rsp_q_map[0]->options = icb->firmware_options_2;
+               WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
+               WRT_REG_DWORD(&reg->isp25mq.req_q_out, 0);
+@@ -1308,12 +1309,8 @@
+       DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));
+-      if (ha->flags.npiv_supported) {
+-              if (ha->operating_mode == LOOP)
+-                      ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
++      if (ha->flags.npiv_supported)
+               mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+-      }
+-
+       mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
+@@ -2614,7 +2611,6 @@
+       port_id_t       wrap, nxt_d_id;
+       struct qla_hw_data *ha = vha->hw;
+       struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
+-      struct scsi_qla_host *tvp;
+       rval = QLA_SUCCESS;
+@@ -2714,7 +2710,7 @@
+               /* Bypass virtual ports of the same host. */
+               found = 0;
+               if (ha->num_vhosts) {
+-                      list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
++                      list_for_each_entry(vp, &ha->vp_list, list) {
+                               if (new_fcport->d_id.b24 == vp->d_id.b24) {
+                                       found = 1;
+                                       break;
+@@ -2837,7 +2833,6 @@
+       uint16_t first_loop_id;
+       struct qla_hw_data *ha = vha->hw;
+       struct scsi_qla_host *vp;
+-      struct scsi_qla_host *tvp;
+       rval = QLA_SUCCESS;
+@@ -2862,7 +2857,7 @@
+               /* Check for loop ID being already in use. */
+               found = 0;
+               fcport = NULL;
+-              list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
++              list_for_each_entry(vp, &ha->vp_list, list) {
+                       list_for_each_entry(fcport, &vp->vp_fcports, list) {
+                               if (fcport->loop_id == dev->loop_id &&
+                                                               fcport != dev) {
+@@ -3297,7 +3292,6 @@
+       uint8_t        status = 0;
+       struct qla_hw_data *ha = vha->hw;
+       struct scsi_qla_host *vp;
+-      struct scsi_qla_host *tvp;
+       struct req_que *req = ha->req_q_map[0];
+       if (vha->flags.online) {
+@@ -3313,7 +3307,7 @@
+               if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
+                       atomic_set(&vha->loop_state, LOOP_DOWN);
+                       qla2x00_mark_all_devices_lost(vha, 0);
+-                      list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
++                      list_for_each_entry(vp, &ha->vp_list, list)
+                              qla2x00_mark_all_devices_lost(vp, 0);
+               } else {
+                       if (!atomic_read(&vha->loop_down_timer))
+@@ -3410,7 +3404,7 @@
+               DEBUG(printk(KERN_INFO
+                               "qla2x00_abort_isp(%ld): succeeded.\n",
+                               vha->host_no));
+-              list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
++              list_for_each_entry(vp, &ha->vp_list, list) {
+                       if (vp->vp_idx)
+                               qla2x00_vp_abort_isp(vp);
+               }
+@@ -3435,7 +3429,7 @@
+ static int
+ qla2x00_restart_isp(scsi_qla_host_t *vha)
+ {
+-      int status = 0;
++      uint8_t         status = 0;
+       uint32_t wait_time;
+       struct qla_hw_data *ha = vha->hw;
+       struct req_que *req = ha->req_q_map[0];
+@@ -3499,7 +3493,7 @@
+               rsp = ha->rsp_q_map[i];
+               if (rsp) {
+                       rsp->options &= ~BIT_0;
+-                      ret = qla25xx_init_rsp_que(base_vha, rsp);
++                      ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options);
+                       if (ret != QLA_SUCCESS)
+                               DEBUG2_17(printk(KERN_WARNING
+                                       "%s Rsp que:%d init failed\n", __func__,
+@@ -3513,7 +3507,7 @@
+               if (req) {
+               /* Clear outstanding commands array. */
+                       req->options &= ~BIT_0;
+-                      ret = qla25xx_init_req_que(base_vha, req);
++                      ret = qla25xx_init_req_que(base_vha, req, req->options);
+                       if (ret != QLA_SUCCESS)
+                               DEBUG2_17(printk(KERN_WARNING
+                                       "%s Req que:%d init failed\n", __func__,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_isr.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_isr.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_isr.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_isr.c       2009-05-10 23:48:29.000000000 +0200
+@@ -266,40 +266,6 @@
+       }
+ }
+-static void
+-qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
+-{
+-      static char *event[] =
+-              { "Complete", "Request Notification", "Time Extension" };
+-      int rval;
+-      struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
+-      uint16_t __iomem *wptr;
+-      uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
+-
+-      /* Seed data -- mailbox1 -> mailbox7. */
+-      wptr = (uint16_t __iomem *)&reg24->mailbox1;
+-      for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++)
+-              mb[cnt] = RD_REG_WORD(wptr);
+-
+-      DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+-          "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no,
+-          event[aen & 0xff],
+-          mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6]));
+-
+-      /* Acknowledgement needed? [Notify && non-zero timeout]. */
+-      timeout = (descr >> 8) & 0xf;
+-      if (aen != MBA_IDC_NOTIFY || !timeout)
+-              return;
+-
+-      DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+-          "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout));
+-
+-      rval = qla2x00_post_idc_ack_work(vha, mb);
+-      if (rval != QLA_SUCCESS)
+-              qla_printk(KERN_WARNING, vha->hw,
+-                  "IDC failed to post ACK.\n");
+-}
+-
+ /**
+  * qla2x00_async_event() - Process aynchronous events.
+  * @ha: SCSI driver HA context
+@@ -748,9 +714,21 @@
+                   "%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
+               break;
+       case MBA_IDC_COMPLETE:
++              DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
++                  "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2],
++                  mb[3]));
++              break;
+       case MBA_IDC_NOTIFY:
++              DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
++                  "Request Notification -- %04x %04x %04x\n", vha->host_no,
++                  mb[1], mb[2], mb[3]));
++              /**** Mailbox registers 4 - 7 valid!!! */
++              break;
+       case MBA_IDC_TIME_EXT:
+-              qla81xx_idc_event(vha, mb[0], mb[1]);
++              DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
++                  "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1],
++                  mb[2], mb[3]));
++              /**** Mailbox registers 4 - 7 valid!!! */
+               break;
+       }
+@@ -1729,6 +1707,7 @@
+       struct qla_hw_data *ha;
+       struct rsp_que *rsp;
+       struct device_reg_24xx __iomem *reg;
++      uint16_t msix_disabled_hccr = 0;
+       rsp = (struct rsp_que *) dev_id;
+       if (!rsp) {
+@@ -1741,8 +1720,17 @@
+       spin_lock_irq(&ha->hardware_lock);
++      msix_disabled_hccr = rsp->options;
++      if (!rsp->id)
++              msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22);
++      else
++              msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6);
++
+       qla24xx_process_response_queue(rsp);
++      if (!msix_disabled_hccr)
++              WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
++
+       spin_unlock_irq(&ha->hardware_lock);
+       return IRQ_HANDLED;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_mbx.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_mbx.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_mbx.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_mbx.c       2009-05-10 23:48:29.000000000 +0200
+@@ -2685,7 +2685,6 @@
+       uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
+       struct qla_hw_data *ha = vha->hw;
+       scsi_qla_host_t *vp;
+-      scsi_qla_host_t *tvp;
+       if (rptid_entry->entry_status != 0)
+               return;
+@@ -2711,7 +2710,7 @@
+               if (MSB(stat) == 1)
+                       return;
+-              list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
++              list_for_each_entry(vp, &ha->vp_list, list)
+                       if (vp_idx == vp->vp_idx)
+                               break;
+               if (!vp)
+@@ -3091,7 +3090,8 @@
+ }
+ int
+-qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
++qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
++      uint8_t options)
+ {
+       int rval;
+       unsigned long flags;
+@@ -3101,7 +3101,7 @@
+       struct qla_hw_data *ha = vha->hw;
+       mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
+-      mcp->mb[1] = req->options;
++      mcp->mb[1] = options;
+       mcp->mb[2] = MSW(LSD(req->dma));
+       mcp->mb[3] = LSW(LSD(req->dma));
+       mcp->mb[6] = MSW(MSD(req->dma));
+@@ -3128,7 +3128,7 @@
+       mcp->tov = 60;
+       spin_lock_irqsave(&ha->hardware_lock, flags);
+-      if (!(req->options & BIT_0)) {
++      if (!(options & BIT_0)) {
+               WRT_REG_DWORD(&reg->req_q_in, 0);
+               WRT_REG_DWORD(&reg->req_q_out, 0);
+       }
+@@ -3142,7 +3142,8 @@
+ }
+ int
+-qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
++qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
++      uint8_t options)
+ {
+       int rval;
+       unsigned long flags;
+@@ -3152,7 +3153,7 @@
+       struct qla_hw_data *ha = vha->hw;
+       mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
+-      mcp->mb[1] = rsp->options;
++      mcp->mb[1] = options;
+       mcp->mb[2] = MSW(LSD(rsp->dma));
+       mcp->mb[3] = LSW(LSD(rsp->dma));
+       mcp->mb[6] = MSW(MSD(rsp->dma));
+@@ -3177,7 +3178,7 @@
+       mcp->tov = 60;
+       spin_lock_irqsave(&ha->hardware_lock, flags);
+-      if (!(rsp->options & BIT_0)) {
++      if (!(options & BIT_0)) {
+               WRT_REG_DWORD(&reg->rsp_q_out, 0);
+               WRT_REG_DWORD(&reg->rsp_q_in, 0);
+       }
+@@ -3192,29 +3193,3 @@
+       return rval;
+ }
+-int
+-qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb)
+-{
+-      int rval;
+-      mbx_cmd_t mc;
+-      mbx_cmd_t *mcp = &mc;
+-
+-      DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+-
+-      mcp->mb[0] = MBC_IDC_ACK;
+-      memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+-      mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+-      mcp->in_mb = MBX_0;
+-      mcp->tov = MBX_TOV_SECONDS;
+-      mcp->flags = 0;
+-      rval = qla2x00_mailbox_command(vha, mcp);
+-
+-      if (rval != QLA_SUCCESS) {
+-              DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+-                  vha->host_no, rval, mcp->mb[0]));
+-      } else {
+-              DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+-      }
+-
+-      return rval;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_mid.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_mid.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_mid.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_mid.c       2009-05-10 23:48:29.000000000 +0200
+@@ -69,10 +69,9 @@
+ qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
+ {
+       scsi_qla_host_t *vha;
+-      struct scsi_qla_host *tvha;
+       /* Locate matching device in database. */
+-      list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
++      list_for_each_entry(vha, &ha->vp_list, list) {
+               if (!memcmp(port_name, vha->port_name, WWN_SIZE))
+                       return vha;
+       }
+@@ -195,11 +194,11 @@
+ void
+ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
+ {
+-      scsi_qla_host_t *vha, *tvha;
++      scsi_qla_host_t *vha;
+       struct qla_hw_data *ha = rsp->hw;
+       int i = 0;
+-      list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
++      list_for_each_entry(vha, &ha->vp_list, list) {
+               if (vha->vp_idx) {
+                       switch (mb[0]) {
+                       case MBA_LIP_OCCURRED:
+@@ -301,7 +300,6 @@
+       int ret;
+       struct qla_hw_data *ha = vha->hw;
+       scsi_qla_host_t *vp;
+-      struct scsi_qla_host *tvp;
+       if (vha->vp_idx)
+               return;
+@@ -310,7 +308,7 @@
+       clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
+-      list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
++      list_for_each_entry(vp, &ha->vp_list, list) {
+               if (vp->vp_idx)
+                       ret = qla2x00_do_dpc_vp(vp);
+       }
+@@ -398,7 +396,7 @@
+       qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
+-      memset(vha->req_ques, 0, sizeof(vha->req_ques));
++      memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES);
+       vha->req_ques[0] = ha->req_q_map[0]->id;
+       host->can_queue = ha->req_q_map[0]->length + 128;
+       host->this_id = 255;
+@@ -473,7 +471,7 @@
+       if (req) {
+               req->options |= BIT_0;
+-              ret = qla25xx_init_req_que(vha, req);
++              ret = qla25xx_init_req_que(vha, req, req->options);
+       }
+       if (ret == QLA_SUCCESS)
+               qla25xx_free_req_que(vha, req);
+@@ -488,7 +486,7 @@
+       if (rsp) {
+               rsp->options |= BIT_0;
+-              ret = qla25xx_init_rsp_que(vha, rsp);
++              ret = qla25xx_init_rsp_que(vha, rsp, rsp->options);
+       }
+       if (ret == QLA_SUCCESS)
+               qla25xx_free_rsp_que(vha, rsp);
+@@ -504,7 +502,7 @@
+       req->options |= BIT_3;
+       req->qos = qos;
+-      ret = qla25xx_init_req_que(vha, req);
++      ret = qla25xx_init_req_que(vha, req, req->options);
+       if (ret != QLA_SUCCESS)
+               DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__));
+       /* restore options bit */
+@@ -634,7 +632,7 @@
+       req->max_q_depth = ha->req_q_map[0]->max_q_depth;
+       mutex_unlock(&ha->vport_lock);
+-      ret = qla25xx_init_req_que(base_vha, req);
++      ret = qla25xx_init_req_que(base_vha, req, options);
+       if (ret != QLA_SUCCESS) {
+               qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
+               mutex_lock(&ha->vport_lock);
+@@ -712,7 +710,7 @@
+       if (ret)
+               goto que_failed;
+-      ret = qla25xx_init_rsp_que(base_vha, rsp);
++      ret = qla25xx_init_rsp_que(base_vha, rsp, options);
+       if (ret != QLA_SUCCESS) {
+               qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
+               mutex_lock(&ha->vport_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_os.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_os.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_os.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_os.c        2009-05-10 23:48:29.000000000 +0200
+@@ -2222,6 +2222,10 @@
+ {
+       char    name[16];
++      ha->init_cb_size = sizeof(init_cb_t);
++      if (IS_QLA2XXX_MIDTYPE(ha))
++              ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
++
+       ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
+               &ha->init_cb_dma, GFP_KERNEL);
+       if (!ha->init_cb)
+@@ -2518,19 +2522,6 @@
+       return qla2x00_post_work(vha, e, 1);
+ }
+-int
+-qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
+-{
+-      struct qla_work_evt *e;
+-
+-      e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+-      if (!e)
+-              return QLA_FUNCTION_FAILED;
+-
+-      memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+-      return qla2x00_post_work(vha, e, 1);
+-}
+-
+ static void
+ qla2x00_do_work(struct scsi_qla_host *vha)
+ {
+@@ -2548,9 +2539,6 @@
+                       fc_host_post_event(vha->host, fc_get_event_number(),
+                           e->u.aen.code, e->u.aen.data);
+                       break;
+-              case QLA_EVT_IDC_ACK:
+-                      qla81xx_idc_ack(vha, e->u.idc_ack.mb);
+-                      break;
+               }
+               if (e->flags & QLA_EVT_FLAG_FREE)
+                       kfree(e);
+@@ -2564,7 +2552,7 @@
+ void qla2x00_relogin(struct scsi_qla_host *vha)
+ {
+       fc_port_t       *fcport;
+-      int status;
++      uint8_t         status;
+       uint16_t        next_loopid = 0;
+       struct qla_hw_data *ha = vha->hw;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_sup.c linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_sup.c
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_sup.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_sup.c       2009-05-10 23:48:29.000000000 +0200
+@@ -684,7 +684,7 @@
+                   "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
+                   le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
+-              switch (le32_to_cpu(region->code) & 0xff) {
++              switch (le32_to_cpu(region->code)) {
+               case FLT_REG_FW:
+                       ha->flt_region_fw = start;
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_version.h linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_version.h
+--- linux-2.6.29.owrt/drivers/scsi/qla2xxx/qla_version.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/qla2xxx/qla_version.h   2009-05-10 23:48:29.000000000 +0200
+@@ -7,7 +7,7 @@
+ /*
+  * Driver version
+  */
+-#define QLA2XXX_VERSION      "8.03.00-k4"
++#define QLA2XXX_VERSION      "8.03.00-k2"
+ #define QLA_DRIVER_MAJOR_VER  8
+ #define QLA_DRIVER_MINOR_VER  3
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/scsi_lib.c linux-2.6.29-rc3.owrt/drivers/scsi/scsi_lib.c
+--- linux-2.6.29.owrt/drivers/scsi/scsi_lib.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/scsi_lib.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1040,11 +1040,12 @@
+                               action = ACTION_FAIL;
+                       break;
+               case ABORTED_COMMAND:
+-                      action = ACTION_FAIL;
+                       if (sshdr.asc == 0x10) { /* DIF */
+                               description = "Target Data Integrity Failure";
++                              action = ACTION_FAIL;
+                               error = -EILSEQ;
+-                      }
++                      } else
++                              action = ACTION_RETRY;
+                       break;
+               case NOT_READY:
+                       /* If the device is in the process of becoming
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/scsi_scan.c linux-2.6.29-rc3.owrt/drivers/scsi/scsi_scan.c
+--- linux-2.6.29.owrt/drivers/scsi/scsi_scan.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/scsi_scan.c     2009-05-10 23:48:29.000000000 +0200
+@@ -317,7 +317,6 @@
+       return sdev;
+ out_device_destroy:
+-      scsi_device_set_state(sdev, SDEV_DEL);
+       transport_destroy_device(&sdev->sdev_gendev);
+       put_device(&sdev->sdev_gendev);
+ out:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/sd.c linux-2.6.29-rc3.owrt/drivers/scsi/sd.c
+--- linux-2.6.29.owrt/drivers/scsi/sd.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/sd.c    2009-05-10 23:48:29.000000000 +0200
+@@ -107,7 +107,6 @@
+ static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
+ static void sd_print_result(struct scsi_disk *, int);
+-static DEFINE_SPINLOCK(sd_index_lock);
+ static DEFINE_IDA(sd_index_ida);
+ /* This semaphore is used to mediate the 0->1 reference get in the
+@@ -1167,19 +1166,23 @@
+               /*
+                * The device does not want the automatic start to be issued.
+                */
+-              if (sdkp->device->no_start_on_add)
++              if (sdkp->device->no_start_on_add) {
+                       break;
++              }
+-              if (sense_valid && sshdr.sense_key == NOT_READY) {
+-                      if (sshdr.asc == 4 && sshdr.ascq == 3)
+-                              break;  /* manual intervention required */
+-                      if (sshdr.asc == 4 && sshdr.ascq == 0xb)
+-                              break;  /* standby */
+-                      if (sshdr.asc == 4 && sshdr.ascq == 0xc)
+-                              break;  /* unavailable */
+-                      /*
+-                       * Issue command to spin up drive when not ready
+-                       */
++              /*
++               * If manual intervention is required, or this is an
++               * absent USB storage device, a spinup is meaningless.
++               */
++              if (sense_valid &&
++                  sshdr.sense_key == NOT_READY &&
++                  sshdr.asc == 4 && sshdr.ascq == 3) {
++                      break;          /* manual intervention required */
++
++              /*
++               * Issue command to spin up drive when not ready
++               */
++              } else if (sense_valid && sshdr.sense_key == NOT_READY) {
+                       if (!spintime) {
+                               sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
+                               cmd[0] = START_STOP;
+@@ -1911,9 +1914,7 @@
+               if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
+                       goto out_put;
+-              spin_lock(&sd_index_lock);
+               error = ida_get_new(&sd_index_ida, &index);
+-              spin_unlock(&sd_index_lock);
+       } while (error == -EAGAIN);
+       if (error)
+@@ -1935,9 +1936,7 @@
+       return 0;
+  out_free_index:
+-      spin_lock(&sd_index_lock);
+       ida_remove(&sd_index_ida, index);
+-      spin_unlock(&sd_index_lock);
+  out_put:
+       put_disk(gd);
+  out_free:
+@@ -1987,9 +1986,7 @@
+       struct scsi_disk *sdkp = to_scsi_disk(dev);
+       struct gendisk *disk = sdkp->disk;
+       
+-      spin_lock(&sd_index_lock);
+       ida_remove(&sd_index_ida, sdkp->index);
+-      spin_unlock(&sd_index_lock);
+       disk->private_data = NULL;
+       put_disk(disk);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/sg.c linux-2.6.29-rc3.owrt/drivers/scsi/sg.c
+--- linux-2.6.29.owrt/drivers/scsi/sg.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/sg.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1078,7 +1078,7 @@
+       case BLKTRACESETUP:
+               return blk_trace_setup(sdp->device->request_queue,
+                                      sdp->disk->disk_name,
+-                                     MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
++                                     sdp->device->sdev_gendev.devt,
+                                      (char *)arg);
+       case BLKTRACESTART:
+               return blk_trace_startstop(sdp->device->request_queue, 1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/scsi/zalon.c linux-2.6.29-rc3.owrt/drivers/scsi/zalon.c
+--- linux-2.6.29.owrt/drivers/scsi/zalon.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/scsi/zalon.c 2009-05-10 23:48:29.000000000 +0200
+@@ -137,7 +137,7 @@
+               goto fail;
+       if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
+-        dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
++        dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ",
+                    dev->irq);
+               goto fail;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/8250.c linux-2.6.29-rc3.owrt/drivers/serial/8250.c
+--- linux-2.6.29.owrt/drivers/serial/8250.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/8250.c        2009-05-10 23:48:29.000000000 +0200
+@@ -2083,20 +2083,6 @@
+       serial8250_set_mctrl(&up->port, up->port.mctrl);
+-      /* Serial over Lan (SoL) hack:
+-         Intel 8257x Gigabit ethernet chips have a
+-         16550 emulation, to be used for Serial Over Lan.
+-         Those chips take a longer time than a normal
+-         serial device to signalize that a transmission
+-         data was queued. Due to that, the above test generally
+-         fails. One solution would be to delay the reading of
+-         iir. However, this is not reliable, since the timeout
+-         is variable. So, let's just don't test if we receive
+-         TX irq. This way, we'll never enable UART_BUG_TXEN.
+-       */
+-      if (up->port.flags & UPF_NO_TXEN_TEST)
+-              goto dont_test_tx_en;
+-
+       /*
+        * Do a quick test to see if we receive an
+        * interrupt when we enable the TX irq.
+@@ -2116,7 +2102,6 @@
+               up->bugs &= ~UART_BUG_TXEN;
+       }
+-dont_test_tx_en:
+       spin_unlock_irqrestore(&up->port.lock, flags);
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/8250_pci.c linux-2.6.29-rc3.owrt/drivers/serial/8250_pci.c
+--- linux-2.6.29.owrt/drivers/serial/8250_pci.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/8250_pci.c    2009-05-10 23:48:29.000000000 +0200
+@@ -798,21 +798,6 @@
+       return setup_port(priv, port, bar, offset, board->reg_shift);
+ }
+-static int skip_tx_en_setup(struct serial_private *priv,
+-                      const struct pciserial_board *board,
+-                      struct uart_port *port, int idx)
+-{
+-      port->flags |= UPF_NO_TXEN_TEST;
+-      printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+-                        "[%04x:%04x] subsystem [%04x:%04x]\n",
+-                        priv->dev->vendor,
+-                        priv->dev->device,
+-                        priv->dev->subsystem_vendor,
+-                        priv->dev->subsystem_device);
+-
+-      return pci_default_setup(priv, board, port, idx);
+-}
+-
+ /* This should be in linux/pci_ids.h */
+ #define PCI_VENDOR_ID_SBSMODULARIO    0x124B
+ #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
+@@ -879,27 +864,6 @@
+               .init           = pci_inteli960ni_init,
+               .setup          = pci_default_setup,
+       },
+-      {
+-              .vendor         = PCI_VENDOR_ID_INTEL,
+-              .device         = PCI_DEVICE_ID_INTEL_8257X_SOL,
+-              .subvendor      = PCI_ANY_ID,
+-              .subdevice      = PCI_ANY_ID,
+-              .setup          = skip_tx_en_setup,
+-      },
+-      {
+-              .vendor         = PCI_VENDOR_ID_INTEL,
+-              .device         = PCI_DEVICE_ID_INTEL_82573L_SOL,
+-              .subvendor      = PCI_ANY_ID,
+-              .subdevice      = PCI_ANY_ID,
+-              .setup          = skip_tx_en_setup,
+-      },
+-      {
+-              .vendor         = PCI_VENDOR_ID_INTEL,
+-              .device         = PCI_DEVICE_ID_INTEL_82573E_SOL,
+-              .subvendor      = PCI_ANY_ID,
+-              .subdevice      = PCI_ANY_ID,
+-              .setup          = skip_tx_en_setup,
+-      },
+       /*
+        * ITE
+        */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/atmel_serial.c linux-2.6.29-rc3.owrt/drivers/serial/atmel_serial.c
+--- linux-2.6.29.owrt/drivers/serial/atmel_serial.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/atmel_serial.c        2009-05-10 23:48:29.000000000 +0200
+@@ -877,10 +877,6 @@
+               }
+       }
+-      /* Save current CSR for comparison in atmel_tasklet_func() */
+-      atmel_port->irq_status_prev = UART_GET_CSR(port);
+-      atmel_port->irq_status = atmel_port->irq_status_prev;
+-
+       /*
+        * Finally, enable the serial port
+        */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/jsm/jsm_driver.c linux-2.6.29-rc3.owrt/drivers/serial/jsm/jsm_driver.c
+--- linux-2.6.29.owrt/drivers/serial/jsm/jsm_driver.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/jsm/jsm_driver.c      2009-05-10 23:48:29.000000000 +0200
+@@ -84,8 +84,6 @@
+       brd->pci_dev = pdev;
+       if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
+               brd->maxports = 4;
+-      else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+-              brd->maxports = 8;
+       else
+               brd->maxports = 2;
+@@ -214,7 +212,6 @@
+       { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
+       { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+       { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+-      { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
+       { 0, }
+ };
+ MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/jsm/jsm_tty.c linux-2.6.29-rc3.owrt/drivers/serial/jsm/jsm_tty.c
+--- linux-2.6.29.owrt/drivers/serial/jsm/jsm_tty.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/jsm/jsm_tty.c 2009-05-10 23:48:29.000000000 +0200
+@@ -161,11 +161,6 @@
+       channel->ch_bd->bd_ops->disable_receiver(channel);
+ }
+-static void jsm_tty_enable_ms(struct uart_port *port)
+-{
+-      /* Nothing needed */
+-}
+-
+ static void jsm_tty_break(struct uart_port *port, int break_state)
+ {
+       unsigned long lock_flags;
+@@ -350,7 +345,6 @@
+       .start_tx       = jsm_tty_start_tx,
+       .send_xchar     = jsm_tty_send_xchar,
+       .stop_rx        = jsm_tty_stop_rx,
+-      .enable_ms      = jsm_tty_enable_ms,
+       .break_ctl      = jsm_tty_break,
+       .startup        = jsm_tty_open,
+       .shutdown       = jsm_tty_close,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/serial/sh-sci.h linux-2.6.29-rc3.owrt/drivers/serial/sh-sci.h
+--- linux-2.6.29.owrt/drivers/serial/sh-sci.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/serial/sh-sci.h      2009-05-10 23:48:29.000000000 +0200
+@@ -133,7 +133,7 @@
+ # define SCSPTR3      0xffed0024      /* 16 bit SCIF */
+ # define SCSPTR4      0xffee0024      /* 16 bit SCIF */
+ # define SCSPTR5      0xffef0024      /* 16 bit SCIF */
+-# define SCIF_ORER    0x0001          /* Overrun error bit */
++# define SCIF_OPER    0x0001          /* Overrun error bit */
+ # define SCSCR_INIT(port)     0x3a    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+       defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/spi/spi_gpio.c linux-2.6.29-rc3.owrt/drivers/spi/spi_gpio.c
+--- linux-2.6.29.owrt/drivers/spi/spi_gpio.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/spi/spi_gpio.c       2009-05-10 23:48:29.000000000 +0200
+@@ -117,7 +117,7 @@
+ static inline int getmiso(const struct spi_device *spi)
+ {
+-      return !!gpio_get_value(SPI_MISO_GPIO);
++      return gpio_get_value(SPI_MISO_GPIO);
+ }
+ #undef pdata
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/agnx/agnx.h linux-2.6.29-rc3.owrt/drivers/staging/agnx/agnx.h
+--- linux-2.6.29.owrt/drivers/staging/agnx/agnx.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/agnx/agnx.h  2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef AGNX_H_
+ #define AGNX_H_
+-#include <linux/io.h>
+-
+ #include "xmit.h"
+ #define PFX                           KBUILD_MODNAME ": "
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/altpciechdma/altpciechdma.c linux-2.6.29-rc3.owrt/drivers/staging/altpciechdma/altpciechdma.c
+--- linux-2.6.29.owrt/drivers/staging/altpciechdma/altpciechdma.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/altpciechdma/altpciechdma.c  2009-05-10 23:48:29.000000000 +0200
+@@ -531,7 +531,7 @@
+         goto fail;
+       /* allocate and map coherently-cached memory for a DMA-able buffer */
+-      /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */
++      /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */
+       buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus);
+       if (!buffer_virt) {
+               printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n");
+@@ -846,7 +846,7 @@
+ #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!)
+       /* query for DMA transfer */
+-      /* @see Documentation/PCI/PCI-DMA-mapping.txt */
++      /* @see Documentation/DMA-mapping.txt */
+       if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) {
+               pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK);
+               /* use 64-bit DMA */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/android/binder.c linux-2.6.29-rc3.owrt/drivers/staging/android/binder.c
+--- linux-2.6.29.owrt/drivers/staging/android/binder.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/android/binder.c     2009-05-10 23:48:29.000000000 +0200
+@@ -319,7 +319,6 @@
+       int fd, error;
+       struct fdtable *fdt;
+       unsigned long rlim_cur;
+-      unsigned long irqs;
+       if (files == NULL)
+               return -ESRCH;
+@@ -336,11 +335,12 @@
+        * N.B. For clone tasks sharing a files structure, this test
+        * will limit the total number of files that can be opened.
+        */
+-      rlim_cur = 0;
+-      if (lock_task_sighand(tsk, &irqs)) {
++      rcu_read_lock();
++      if (tsk->signal)
+               rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+-              unlock_task_sighand(tsk, &irqs);
+-      }
++      else
++              rlim_cur = 0;
++      rcu_read_unlock();
+       if (fd >= rlim_cur)
+               goto out;
+@@ -2649,14 +2649,14 @@
+ {
+       struct binder_proc *proc = vma->vm_private_data;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
++              printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+       dump_stack();
+ }
+ static void binder_vma_close(struct vm_area_struct *vma)
+ {
+       struct binder_proc *proc = vma->vm_private_data;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
++              printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+       proc->vma = NULL;
+ }
+@@ -2677,7 +2677,7 @@
+               vma->vm_end = vma->vm_start + SZ_4M;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
++              printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+       if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) {
+               ret = -EPERM;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/android/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/android/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/android/Kconfig  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/android/Kconfig      2009-05-10 23:48:29.000000000 +0200
+@@ -27,7 +27,6 @@
+       bool "Android RAM Console Enable error correction"
+       default n
+       depends on ANDROID_RAM_CONSOLE
+-      depends on !ANDROID_RAM_CONSOLE_EARLY_INIT
+       select REED_SOLOMON
+       select REED_SOLOMON_ENC8
+       select REED_SOLOMON_DEC8
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/android/lowmemorykiller.txt linux-2.6.29-rc3.owrt/drivers/staging/android/lowmemorykiller.txt
+--- linux-2.6.29.owrt/drivers/staging/android/lowmemorykiller.txt      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/android/lowmemorykiller.txt  1970-01-01 01:00:00.000000000 +0100
+@@ -1,16 +0,0 @@
+-The lowmemorykiller driver lets user-space specify a set of memory thresholds
+-where processes with a range of oom_adj values will get killed. Specify the
+-minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the
+-number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both
+-files take a comma separated list of numbers in ascending order.
+-
+-For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and
+-"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes
+-with a oom_adj value of 8 or higher when the free memory drops below 4096 pages
+-and kill processes with a oom_adj value of 0 or higher when the free memory
+-drops below 1024 pages.
+-
+-The driver considers memory used for caches to be free, but if a large
+-percentage of the cached memory is locked this can be very inaccurate
+-and processes may not get killed until the normal oom killer is triggered.
+-
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/android/ram_console.c linux-2.6.29-rc3.owrt/drivers/staging/android/ram_console.c
+--- linux-2.6.29.owrt/drivers/staging/android/ram_console.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/android/ram_console.c        2009-05-10 23:48:29.000000000 +0200
+@@ -224,23 +224,9 @@
+       ram_console_buffer_size =
+               buffer_size - sizeof(struct ram_console_buffer);
+-      if (ram_console_buffer_size > buffer_size) {
+-              pr_err("ram_console: buffer %p, invalid size %d, datasize %d\n",
+-                     buffer, buffer_size, ram_console_buffer_size);
+-              return 0;
+-      }
+-
+ #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+       ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size,
+                                               ECC_BLOCK_SIZE) + 1) * ECC_SIZE;
+-
+-      if (ram_console_buffer_size > buffer_size) {
+-              pr_err("ram_console: buffer %p, invalid size %d, "
+-                     "non-ecc datasize %d\n",
+-                     buffer, buffer_size, ram_console_buffer_size);
+-              return 0;
+-      }
+-
+       ram_console_par_buffer = buffer->data + ram_console_buffer_size;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/android/timed_gpio.c linux-2.6.29-rc3.owrt/drivers/staging/android/timed_gpio.c
+--- linux-2.6.29.owrt/drivers/staging/android/timed_gpio.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/android/timed_gpio.c 2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/hrtimer.h>
+ #include <linux/err.h>
+-#include <linux/gpio.h>
++#include <asm/arch/gpio.h>
+ #include "timed_gpio.h"
+@@ -49,8 +49,7 @@
+       if (hrtimer_active(&gpio_data->timer)) {
+               ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
+-              struct timeval t = ktime_to_timeval(r);
+-              remaining = t.tv_sec * 1000 + t.tv_usec / 1000;
++              remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000;
+       } else
+               remaining = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/at76_usb/at76_usb.c linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/at76_usb.c
+--- linux-2.6.29.owrt/drivers/staging/at76_usb/at76_usb.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/at76_usb.c  2009-05-10 23:48:29.000000000 +0200
+@@ -6,6 +6,7 @@
+  * Copyright (c) 2004 Nick Jones
+  * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
+  * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
++ * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
+  *
+  * This program is free software; you can redistribute it and/or
+  * modify it under the terms of the GNU General Public License as
+@@ -16,6 +17,13 @@
+  * Atmel AT76C503A/505/505A.
+  *
+  * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
++ *
++ * TODO for the mac80211 port:
++ * o adhoc support
++ * o RTS/CTS support
++ * o Power Save Mode support
++ * o support for short/long preambles
++ * o export variables through debugfs/sysfs
+  */
+ #include <linux/init.h>
+@@ -36,7 +44,7 @@
+ #include <net/ieee80211_radiotap.h>
+ #include <linux/firmware.h>
+ #include <linux/leds.h>
+-#include <net/ieee80211.h>
++#include <net/mac80211.h>
+ #include "at76_usb.h"
+@@ -76,31 +84,43 @@
+ #define DBG_WE_EVENTS         0x08000000      /* dump wireless events */
+ #define DBG_FW                        0x10000000      /* firmware download */
+ #define DBG_DFU                       0x20000000      /* device firmware upgrade */
++#define DBG_CMD                       0x40000000
++#define DBG_MAC80211          0x80000000
+ #define DBG_DEFAULTS          0
+ /* Use our own dbg macro */
+ #define at76_dbg(bits, format, arg...) \
+-      do { \
+-              if (at76_debug & (bits)) \
++do {  \
++      if (at76_debug & (bits))        \
++              printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
++} while (0)
++
++#define at76_dbg_dump(bits, buf, len, format, arg...) \
++do {  \
++      if (at76_debug & (bits)) {      \
+               printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
+-      } while (0)
++              print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
++              }                                                       \
++} while (0)
+ static int at76_debug = DBG_DEFAULTS;
++#define FIRMWARE_IS_WPA(ver) ((ver.major == 1) && (ver.minor == 103))
++
+ /* Protect against concurrent firmware loading and parsing */
+ static struct mutex fw_mutex;
+ static struct fwentry firmwares[] = {
+-      [0] = {""},
+-      [BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"},
+-      [BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"},
+-      [BOARD_503] = {"atmel_at76c503-rfmd.bin"},
+-      [BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"},
+-      [BOARD_505] = {"atmel_at76c505-rfmd.bin"},
+-      [BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"},
+-      [BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"},
+-      [BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"},
++      [0] = { "" },
++      [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
++      [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
++      [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
++      [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
++      [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
++      [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
++      [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
++      [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
+ };
+ #define USB_DEVICE_DATA(__ops)        .driver_info = (kernel_ulong_t)(__ops)
+@@ -110,135 +130,133 @@
+        * at76c503-i3861
+        */
+       /* Generic AT76C503/3861 device */
+-      {USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Linksys WUSB11 v2.1/v2.6 */
+-      {USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Netgear MA101 rev. A */
+-      {USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Tekram U300C / Allnet ALL0193 */
+-      {USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* HP HN210W J7801A */
+-      {USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Sitecom/Z-Com/Zyxel M4Y-750 */
+-      {USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Dynalink/Askey WLL013 (intersil) */
+-      {USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
+-      {USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* BenQ AWL300 */
+-      {USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Addtron AWU-120, Compex WLU11 */
+-      {USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Intel AP310 AnyPoint II USB */
+-      {USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Dynalink L11U */
+-      {USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* Arescom WL-210, FCC id 07J-GL2411USB */
+-      {USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* I-O DATA WN-B11/USB */
+-      {USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /* BT Voyager 1010 */
+-      {USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)},
++      { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
+       /*
+        * at76c503-i3863
+        */
+       /* Generic AT76C503/3863 device */
+-      {USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)},
++      { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+       /* Samsung SWL-2100U */
+-      {USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)},
++      { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
+       /*
+        * at76c503-rfmd
+        */
+       /* Generic AT76C503/RFMD device */
+-      {USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+       /* Dynalink/Askey WLL013 (rfmd) */
+-      {USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
+       /* Linksys WUSB11 v2.6 */
+-      {USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
+       /* Network Everywhere NWU11B */
+-      {USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
+       /* Netgear MA101 rev. B */
+-      {USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+       /* D-Link DWL-120 rev. E */
+-      {USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
+       /* Actiontec 802UAT1, HWU01150-01UK */
+-      {USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
+       /* AirVast W-Buddie WN210 */
+-      {USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
+       /* Dick Smith Electronics XH1153 802.11b USB adapter */
+-      {USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
+       /* CNet CNUSB611 */
+-      {USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
+       /* FiberLine FL-WL200U */
+-      {USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
+       /* BenQ AWL400 USB stick */
+-      {USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
+       /* 3Com 3CRSHEW696 */
+-      {USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
+       /* Siemens Santis ADSL WLAN USB adapter WLL 013 */
+-      {USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
+       /* Belkin F5D6050, version 2 */
+-      {USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
+       /* iBlitzz, BWU613 (not *B or *SB) */
+-      {USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
+       /* Gigabyte GN-WLBM101 */
+-      {USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
+       /* Planex GW-US11S */
+-      {USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
+       /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
+-      {USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
+       /* Corega Wireless LAN USB-11 mini */
+-      {USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
+       /* Corega Wireless LAN USB-11 mini2 */
+-      {USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
+       /* Uniden PCW100 */
+-      {USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)},
++      { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
+       /*
+        * at76c503-rfmd-acc
+        */
+       /* SMC2664W */
+-      {USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)},
++      { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
+       /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
+-      {USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)},
++      { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
+       /*
+        * at76c505-rfmd
+        */
+       /* Generic AT76C505/RFMD */
+-      {USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)},
++      { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
+       /*
+        * at76c505-rfmd2958
+        */
+       /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
+-      {USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* Fiberline FL-WL240U */
+-      {USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* CNet CNUSB-611G */
+-      {USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* Linksys WUSB11 v2.8 */
+-      {USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
+-      {USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* Corega WLAN USB Stick 11 */
+-      {USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
+       /* Microstar MSI Box MS6978 */
+-      {USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)},
++      { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
+       /*
+        * at76c505a-rfmd2958
+        */
+       /* Generic AT76C505A device */
+-      {USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)},
++      { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
+       /* Generic AT76C505AS device */
+-      {USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)},
++      { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
+       /* Siemens Gigaset USB WLAN Adapter 11 */
+-      {USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)},
+-      /* OQO Model 01+ Internal Wi-Fi */
+-      {USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)},
++      { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+       /*
+        * at76c505amx-rfmd
+        */
+       /* Generic AT76C505AMX device */
+-      {USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)},
+-      {}
++      { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
++      { }
+ };
+ MODULE_DEVICE_TABLE(usb, dev_table);
+@@ -246,26 +264,8 @@
+ /* Supported rates of this hardware, bit 7 marks basic rates */
+ static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
+-/* Frequency of each channel in MHz */
+-static const long channel_frequency[] = {
+-      2412, 2417, 2422, 2427, 2432, 2437, 2442,
+-      2447, 2452, 2457, 2462, 2467, 2472, 2484
+-};
+-
+-#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
+-
+ static const char *const preambles[] = { "long", "short", "auto" };
+-static const char *const mac_states[] = {
+-      [MAC_INIT] = "INIT",
+-      [MAC_SCANNING] = "SCANNING",
+-      [MAC_AUTH] = "AUTH",
+-      [MAC_ASSOC] = "ASSOC",
+-      [MAC_JOINING] = "JOINING",
+-      [MAC_CONNECTED] = "CONNECTED",
+-      [MAC_OWN_IBSS] = "OWN_IBSS"
+-};
+-
+ /* Firmware download */
+ /* DFU states */
+ #define STATE_IDLE                    0x00
+@@ -300,17 +300,30 @@
+ static inline int at76_is_intersil(enum board_type board)
+ {
+-      return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
++      if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863)
++              return 1;
++      return 0;
+ }
+ static inline int at76_is_503rfmd(enum board_type board)
+ {
+-      return (board == BOARD_503 || board == BOARD_503_ACC);
++      if (board == BOARD_503 || board == BOARD_503_ACC)
++              return 1;
++      return 0;
++}
++
++static inline int at76_is_505(enum board_type board)
++{
++      if (board == BOARD_505 || board == BOARD_505_2958)
++              return 1;
++      return 0;
+ }
+ static inline int at76_is_505a(enum board_type board)
+ {
+-      return (board == BOARD_505A || board == BOARD_505AMX);
++      if (board == BOARD_505A || board == BOARD_505AMX)
++              return 1;
++      return 0;
+ }
+ /* Load a block of the first (internal) part of the firmware */
+@@ -491,41 +504,6 @@
+       return ret;
+ }
+-/* Report that the scan results are ready */
+-static inline void at76_iwevent_scan_complete(struct net_device *netdev)
+-{
+-      union iwreq_data wrqu;
+-      wrqu.data.length = 0;
+-      wrqu.data.flags = 0;
+-      wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL);
+-      at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name);
+-}
+-
+-static inline void at76_iwevent_bss_connect(struct net_device *netdev,
+-                                          u8 *bssid)
+-{
+-      union iwreq_data wrqu;
+-      wrqu.data.length = 0;
+-      wrqu.data.flags = 0;
+-      memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
+-      wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+-      wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
+-      at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
+-               __func__);
+-}
+-
+-static inline void at76_iwevent_bss_disconnect(struct net_device *netdev)
+-{
+-      union iwreq_data wrqu;
+-      wrqu.data.length = 0;
+-      wrqu.data.flags = 0;
+-      memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+-      wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+-      wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
+-      at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
+-               __func__);
+-}
+-
+ #define HEX2STR_BUFFERS 4
+ #define HEX2STR_MAX_LEN 64
+ #define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10)
+@@ -597,37 +575,6 @@
+               mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
+ }
+-/* Check if the given ssid is hidden */
+-static inline int at76_is_hidden_ssid(u8 *ssid, int length)
+-{
+-      static const u8 zeros[32];
+-
+-      if (length == 0)
+-              return 1;
+-
+-      if (length == 1 && ssid[0] == ' ')
+-              return 1;
+-
+-      return (memcmp(ssid, zeros, length) == 0);
+-}
+-
+-static inline void at76_free_bss_list(struct at76_priv *priv)
+-{
+-      struct list_head *next, *ptr;
+-      unsigned long flags;
+-
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-
+-      priv->curr_bss = NULL;
+-
+-      list_for_each_safe(ptr, next, &priv->bss_list) {
+-              list_del(ptr);
+-              kfree(list_entry(ptr, struct bss_info, list));
+-      }
+-
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
+-}
+-
+ static int at76_remap(struct usb_device *udev)
+ {
+       int ret;
+@@ -651,7 +598,7 @@
+               return -ENOMEM;
+       ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
+                             USB_TYPE_VENDOR | USB_DIR_IN |
+-                            USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
++                            USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1,
+                             USB_CTRL_GET_TIMEOUT);
+       saved = *op_mode;
+       kfree(op_mode);
+@@ -729,7 +676,7 @@
+       kfree(hwcfg);
+       if (ret < 0)
+               printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -738,15 +685,15 @@
+ {
+       int i;
+       static struct reg_domain const fd_tab[] = {
+-              {0x10, "FCC (USA)", 0x7ff},     /* ch 1-11 */
+-              {0x20, "IC (Canada)", 0x7ff},   /* ch 1-11 */
+-              {0x30, "ETSI (most of Europe)", 0x1fff},        /* ch 1-13 */
+-              {0x31, "Spain", 0x600}, /* ch 10-11 */
+-              {0x32, "France", 0x1e00},       /* ch 10-13 */
+-              {0x40, "MKK (Japan)", 0x2000},  /* ch 14 */
+-              {0x41, "MKK1 (Japan)", 0x3fff}, /* ch 1-14 */
+-              {0x50, "Israel", 0x3fc},        /* ch 3-9 */
+-              {0x00, "<unknown>", 0xffffffff} /* ch 1-32 */
++              { 0x10, "FCC (USA)", 0x7ff },   /* ch 1-11 */
++              { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
++              { 0x30, "ETSI (most of Europe)", 0x1fff },      /* ch 1-13 */
++              { 0x31, "Spain", 0x600 },       /* ch 10-11 */
++              { 0x32, "France", 0x1e00 },     /* ch 10-13 */
++              { 0x40, "MKK (Japan)", 0x2000 },        /* ch 14 */
++              { 0x41, "MKK1 (Japan)", 0x3fff },       /* ch 1-14 */
++              { 0x50, "Israel", 0x3fc },      /* ch 3-9 */
++              { 0x00, "<unknown>", 0xffffffff }       /* ch 1-32 */
+       };
+       /* Last entry is fallback for unknown domain code */
+@@ -784,7 +731,7 @@
+       ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
+                             USB_TYPE_VENDOR | USB_DIR_IN |
+                             USB_RECIP_INTERFACE, cmd, 0, stat_buf,
+-                            40, USB_CTRL_GET_TIMEOUT);
++                            sizeof(stat_buf), USB_CTRL_GET_TIMEOUT);
+       if (ret >= 0)
+               ret = stat_buf[5];
+       kfree(stat_buf);
+@@ -792,6 +739,24 @@
+       return ret;
+ }
++#define MAKE_CMD_CASE(c) case (c): return #c
++
++static const char *at76_get_cmd_string(u8 cmd_status)
++{
++      switch (cmd_status) {
++              MAKE_CMD_CASE(CMD_SET_MIB);
++              MAKE_CMD_CASE(CMD_GET_MIB);
++              MAKE_CMD_CASE(CMD_SCAN);
++              MAKE_CMD_CASE(CMD_JOIN);
++              MAKE_CMD_CASE(CMD_START_IBSS);
++              MAKE_CMD_CASE(CMD_RADIO_ON);
++              MAKE_CMD_CASE(CMD_RADIO_OFF);
++              MAKE_CMD_CASE(CMD_STARTUP);
++      }
++
++      return "UNKNOWN";
++}
++
+ static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
+                                int buf_size)
+ {
+@@ -807,6 +772,10 @@
+       cmd_buf->size = cpu_to_le16(buf_size);
+       memcpy(cmd_buf->data, buf, buf_size);
++      at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size,
++                    "issuing command %s (0x%02x)",
++                    at76_get_cmd_string(cmd), cmd);
++
+       ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
+                             USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+                             0, 0, cmd_buf,
+@@ -844,13 +813,13 @@
+               status = at76_get_cmd_status(priv->udev, cmd);
+               if (status < 0) {
+                       printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
+-                             priv->netdev->name, status);
++                             wiphy_name(priv->hw->wiphy), status);
+                       break;
+               }
+               at76_dbg(DBG_WAIT_COMPLETE,
+                        "%s: Waiting on cmd %d, status = %d (%s)",
+-                       priv->netdev->name, cmd, status,
++                       wiphy_name(priv->hw->wiphy), cmd, status,
+                        at76_get_cmd_status_string(status));
+               if (status != CMD_STATUS_IN_PROGRESS
+@@ -861,7 +830,7 @@
+               if (time_after(jiffies, timeout)) {
+                       printk(KERN_ERR
+                              "%s: completion timeout for command %d\n",
+-                             priv->netdev->name, cmd);
++                             wiphy_name(priv->hw->wiphy), cmd);
+                       status = -ETIMEDOUT;
+                       break;
+               }
+@@ -884,7 +853,7 @@
+       if (ret != CMD_STATUS_COMPLETE) {
+               printk(KERN_INFO
+                      "%s: set_mib: at76_wait_completion failed "
+-                     "with %d\n", priv->netdev->name, ret);
++                     "with %d\n", wiphy_name(priv->hw->wiphy), ret);
+               ret = -EIO;
+       }
+@@ -905,7 +874,7 @@
+       ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
+       if (ret < 0)
+               printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
+-                     priv->netdev->name, cmd, ret);
++                     wiphy_name(priv->hw->wiphy), cmd, ret);
+       else
+               ret = 1;
+@@ -926,44 +895,7 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
+-                     priv->netdev->name, ret);
+-
+-      return ret;
+-}
+-
+-/* Set the association id for power save mode */
+-static int at76_set_associd(struct at76_priv *priv, u16 id)
+-{
+-      int ret = 0;
+-
+-      priv->mib_buf.type = MIB_MAC_MGMT;
+-      priv->mib_buf.size = 2;
+-      priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id);
+-      priv->mib_buf.data.word = cpu_to_le16(id);
+-
+-      ret = at76_set_mib(priv, &priv->mib_buf);
+-      if (ret < 0)
+-              printk(KERN_ERR "%s: set_mib (associd) failed: %d\n",
+-                     priv->netdev->name, ret);
+-
+-      return ret;
+-}
+-
+-/* Set the listen interval for power save mode */
+-static int at76_set_listen_interval(struct at76_priv *priv, u16 interval)
+-{
+-      int ret = 0;
+-
+-      priv->mib_buf.type = MIB_MAC;
+-      priv->mib_buf.size = 2;
+-      priv->mib_buf.index = offsetof(struct mib_mac, listen_interval);
+-      priv->mib_buf.data.word = cpu_to_le16(interval);
+-
+-      ret = at76_set_mib(priv, &priv->mib_buf);
+-      if (ret < 0)
+-              printk(KERN_ERR
+-                     "%s: set_mib (listen_interval) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -980,7 +912,7 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -997,7 +929,7 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -1014,7 +946,7 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -1031,24 +963,41 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+-static int at76_add_mac_address(struct at76_priv *priv, void *addr)
++static int at76_set_tkip_bssid(struct at76_priv *priv, const void *addr)
+ {
+       int ret = 0;
+-      priv->mib_buf.type = MIB_MAC_ADDR;
++      priv->mib_buf.type = MIB_MAC_ENCRYPTION;
+       priv->mib_buf.size = ETH_ALEN;
+-      priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr);
++      priv->mib_buf.index = offsetof(struct mib_mac_encryption, tkip_bssid);
+       memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN);
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+-              printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n",
+-                     priv->netdev->name, ret);
++              printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, tkip_bssid) failed: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
++
++      return ret;
++}
++
++static int at76_reset_rsc(struct at76_priv *priv)
++{
++      int ret = 0;
++
++      priv->mib_buf.type = MIB_MAC_ENCRYPTION;
++      priv->mib_buf.size = 4 * 8;
++      priv->mib_buf.index = offsetof(struct mib_mac_encryption, key_rsc);
++      memset(priv->mib_buf.data.data, 0 , priv->mib_buf.size);
++
++      ret = at76_set_mib(priv, &priv->mib_buf);
++      if (ret < 0)
++              printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, key_rsc) failed: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
+       return ret;
+ }
+@@ -1067,16 +1016,16 @@
+                          sizeof(struct mib_mac_addr));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+       at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x",
+-               priv->netdev->name,
++               wiphy_name(priv->hw->wiphy),
+                mac2str(m->mac_addr), m->res[0], m->res[1]);
+       for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
+               at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, "
+-                       "status %d", priv->netdev->name, i,
++                       "status %d", wiphy_name(priv->hw->wiphy), i,
+                        mac2str(m->group_addr[i]), m->group_addr_status[i]);
+ exit:
+       kfree(m);
+@@ -1096,13 +1045,13 @@
+                          sizeof(struct mib_mac_wep));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+       at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
+                "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
+-               "encr_level %u key %d", priv->netdev->name,
++               "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
+                m->privacy_invoked, m->wep_default_key_id,
+                m->wep_key_mapping_len, m->exclude_unencrypted,
+                le32_to_cpu(m->wep_icv_error_count),
+@@ -1114,12 +1063,55 @@
+       for (i = 0; i < WEP_KEYS; i++)
+               at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s",
+-                       priv->netdev->name, i,
++                       wiphy_name(priv->hw->wiphy), i,
+                        hex2str(m->wep_default_keyvalue[i], key_len));
+ exit:
+       kfree(m);
+ }
++static void at76_dump_mib_mac_encryption(struct at76_priv *priv)
++{
++      int i;
++      int ret;
++      /*int key_len;*/
++      struct mib_mac_encryption *m;
++
++      m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL);
++      if (!m)
++              return;
++
++      ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m,
++                         sizeof(struct mib_mac_encryption));
++      if (ret < 0) {
++              dev_err(&priv->udev->dev,
++                      "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n",
++                      wiphy_name(priv->hw->wiphy), ret);
++              goto exit;
++      }
++
++      at76_dbg(DBG_MIB,
++               "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u "
++               "ciph_key_id %u grp_key_id %u excl_unencr %u "
++               "ckip_key_perm %u wep_icv_err %u wep_excluded %u",
++               wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid),
++               m->privacy_invoked, m->cipher_default_key_id,
++               m->cipher_default_group_key_id, m->exclude_unencrypted,
++               m->ckip_key_permutation,
++               le32_to_cpu(m->wep_icv_error_count),
++               le32_to_cpu(m->wep_excluded_count));
++
++      /*key_len = (m->encryption_level == 1) ?
++          WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;*/
++
++      for (i = 0; i < CIPHER_KEYS; i++)
++              at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s",
++                       wiphy_name(priv->hw->wiphy), i,
++                       hex2str(m->cipher_default_keyvalue[i],
++                               CIPHER_KEY_LEN));
++exit:
++      kfree(m);
++}
++
+ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
+ {
+       int ret;
+@@ -1133,7 +1125,7 @@
+                          sizeof(struct mib_mac_mgmt));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+@@ -1144,7 +1136,7 @@
+                "pm_mode %d ibss_change %d res %d "
+                "multi_domain_capability_implemented %d "
+                "international_roaming %d country_string %.3s",
+-               priv->netdev->name, le16_to_cpu(m->beacon_period),
++               wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
+                le16_to_cpu(m->CFP_max_duration),
+                le16_to_cpu(m->medium_occupancy_limit),
+                le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
+@@ -1169,7 +1161,7 @@
+       ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+@@ -1179,7 +1171,8 @@
+                "scan_type %d scan_channel %d probe_delay %u "
+                "min_channel_time %d max_channel_time %d listen_int %d "
+                "desired_ssid %s desired_bssid %s desired_bsstype %d",
+-               priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime),
++               wiphy_name(priv->hw->wiphy),
++               le32_to_cpu(m->max_tx_msdu_lifetime),
+                le32_to_cpu(m->max_rx_lifetime),
+                le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
+                le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
+@@ -1205,7 +1198,7 @@
+       ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+@@ -1214,7 +1207,7 @@
+                "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
+                "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
+                "phy_type %d current_reg_domain %d",
+-               priv->netdev->name, le32_to_cpu(m->ed_threshold),
++               wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
+                le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
+                le16_to_cpu(m->preamble_length),
+                le16_to_cpu(m->plcp_header_length),
+@@ -1238,13 +1231,14 @@
+       ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+       at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
+                "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
+-               "preamble_type %d", priv->netdev->name, m->beacon_enable,
++               "preamble_type %d", wiphy_name(priv->hw->wiphy),
++               m->beacon_enable,
+                m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
+                m->preamble_type);
+ exit:
+@@ -1263,118 +1257,21 @@
+                          sizeof(struct mib_mdomain));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               goto exit;
+       }
+       at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s",
+-               priv->netdev->name,
++               wiphy_name(priv->hw->wiphy),
+                hex2str(m->channel_list, sizeof(m->channel_list)));
+       at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s",
+-               priv->netdev->name,
++               wiphy_name(priv->hw->wiphy),
+                hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel)));
+ exit:
+       kfree(m);
+ }
+-static int at76_get_current_bssid(struct at76_priv *priv)
+-{
+-      int ret = 0;
+-      struct mib_mac_mgmt *mac_mgmt =
+-          kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL);
+-
+-      if (!mac_mgmt) {
+-              ret = -ENOMEM;
+-              goto exit;
+-      }
+-
+-      ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt,
+-                         sizeof(struct mib_mac_mgmt));
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
+-                     priv->netdev->name, ret);
+-              goto error;
+-      }
+-      memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN);
+-      printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name,
+-             mac2str(priv->bssid));
+-error:
+-      kfree(mac_mgmt);
+-exit:
+-      return ret;
+-}
+-
+-static int at76_get_current_channel(struct at76_priv *priv)
+-{
+-      int ret = 0;
+-      struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
+-
+-      if (!phy) {
+-              ret = -ENOMEM;
+-              goto exit;
+-      }
+-      ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy));
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n",
+-                     priv->netdev->name, ret);
+-              goto error;
+-      }
+-      priv->channel = phy->channel_id;
+-error:
+-      kfree(phy);
+-exit:
+-      return ret;
+-}
+-
+-/**
+- * at76_start_scan - start a scan
+- *
+- * @use_essid - use the configured ESSID in non passive mode
+- */
+-static int at76_start_scan(struct at76_priv *priv, int use_essid)
+-{
+-      struct at76_req_scan scan;
+-
+-      memset(&scan, 0, sizeof(struct at76_req_scan));
+-      memset(scan.bssid, 0xff, ETH_ALEN);
+-
+-      if (use_essid) {
+-              memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE);
+-              scan.essid_size = priv->essid_size;
+-      } else
+-              scan.essid_size = 0;
+-
+-      /* jal: why should we start at a certain channel? we do scan the whole
+-         range allowed by reg domain. */
+-      scan.channel = priv->channel;
+-
+-      /* atmelwlandriver differs between scan type 0 and 1 (active/passive)
+-         For ad-hoc mode, it uses type 0 only. */
+-      scan.scan_type = priv->scan_mode;
+-
+-      /* INFO: For probe_delay, not multiplying by 1024 as this will be
+-         slightly less than min_channel_time
+-         (per spec: probe delay < min. channel time) */
+-      scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+-      scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+-      scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
+-      scan.international_scan = 0;
+-
+-      /* other values are set to 0 for type 0 */
+-
+-      at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, "
+-               "channel = %d, probe_delay = %d, scan_min_time = %d, "
+-               "scan_max_time = %d)",
+-               priv->netdev->name, use_essid,
+-               scan.international_scan, scan.channel,
+-               le16_to_cpu(scan.probe_delay),
+-               le16_to_cpu(scan.min_channel_time),
+-               le16_to_cpu(scan.max_channel_time));
+-
+-      return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+-}
+-
+ /* Enable monitor mode */
+ static int at76_start_monitor(struct at76_priv *priv)
+ {
+@@ -1395,86 +1292,6 @@
+       return ret;
+ }
+-static int at76_start_ibss(struct at76_priv *priv)
+-{
+-      struct at76_req_ibss bss;
+-      int ret;
+-
+-      WARN_ON(priv->mac_state != MAC_OWN_IBSS);
+-      if (priv->mac_state != MAC_OWN_IBSS)
+-              return -EBUSY;
+-
+-      memset(&bss, 0, sizeof(struct at76_req_ibss));
+-      memset(bss.bssid, 0xff, ETH_ALEN);
+-      memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE);
+-      bss.essid_size = priv->essid_size;
+-      bss.bss_type = ADHOC_MODE;
+-      bss.channel = priv->channel;
+-
+-      ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss,
+-                                  sizeof(struct at76_req_ibss));
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: start_ibss failed: %d\n",
+-                     priv->netdev->name, ret);
+-              return ret;
+-      }
+-
+-      ret = at76_wait_completion(priv, CMD_START_IBSS);
+-      if (ret != CMD_STATUS_COMPLETE) {
+-              printk(KERN_ERR "%s: start_ibss failed to complete, %d\n",
+-                     priv->netdev->name, ret);
+-              return ret;
+-      }
+-
+-      ret = at76_get_current_bssid(priv);
+-      if (ret < 0)
+-              return ret;
+-
+-      ret = at76_get_current_channel(priv);
+-      if (ret < 0)
+-              return ret;
+-
+-      /* not sure what this is good for ??? */
+-      priv->mib_buf.type = MIB_MAC_MGMT;
+-      priv->mib_buf.size = 1;
+-      priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
+-      priv->mib_buf.data.byte = 0;
+-
+-      ret = at76_set_mib(priv, &priv->mib_buf);
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
+-                     priv->netdev->name, ret);
+-              return ret;
+-      }
+-
+-      netif_carrier_on(priv->netdev);
+-      netif_start_queue(priv->netdev);
+-      return 0;
+-}
+-
+-/* Request card to join BSS in managed or ad-hoc mode */
+-static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      struct at76_req_join join;
+-
+-      BUG_ON(!ptr);
+-
+-      memset(&join, 0, sizeof(struct at76_req_join));
+-      memcpy(join.bssid, ptr->bssid, ETH_ALEN);
+-      memcpy(join.essid, ptr->ssid, ptr->ssid_len);
+-      join.essid_size = ptr->ssid_len;
+-      join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2);
+-      join.channel = ptr->channel;
+-      join.timeout = cpu_to_le16(2000);
+-
+-      at76_dbg(DBG_PROGRESS,
+-               "%s join addr %s ssid %s type %d ch %d timeout %d",
+-               priv->netdev->name, mac2str(join.bssid), join.essid,
+-               join.bss_type, join.channel, le16_to_cpu(join.timeout));
+-      return at76_set_card_command(priv->udev, CMD_JOIN, &join,
+-                                   sizeof(struct at76_req_join));
+-}
+-
+ /* Calculate padding from txbuf->wlength (which excludes the USB TX header),
+    likely to compensate a flaw in the AT76C503A USB part ... */
+ static inline int at76_calc_padding(int wlen)
+@@ -1493,14 +1310,6 @@
+       return 0;
+ }
+-/* We are doing a lot of things here in an interrupt. Need
+-   a bh handler (Watching TV with a TV card is probably
+-   a good test: if you see flickers, we are doing too much.
+-   Currently I do see flickers... even with our tasklet :-( )
+-   Maybe because the bttv driver and usb-uhci use the same interrupt
+-*/
+-/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't
+- * solve everything.. (alex) */
+ static void at76_rx_callback(struct urb *urb)
+ {
+       struct at76_priv *priv = urb->context;
+@@ -1510,1914 +1319,70 @@
+       return;
+ }
+-static void at76_tx_callback(struct urb *urb)
++static int at76_submit_rx_urb(struct at76_priv *priv)
+ {
+-      struct at76_priv *priv = urb->context;
+-      struct net_device_stats *stats = &priv->stats;
+-      unsigned long flags;
+-      struct at76_tx_buffer *mgmt_buf;
+       int ret;
++      int size;
++      struct sk_buff *skb = priv->rx_skb;
+-      switch (urb->status) {
+-      case 0:
+-              stats->tx_packets++;
+-              break;
+-      case -ENOENT:
+-      case -ECONNRESET:
+-              /* urb has been unlinked */
+-              return;
+-      default:
+-              at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
+-                       __func__, urb->status);
+-              stats->tx_errors++;
+-              break;
++      if (!priv->rx_urb) {
++              printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
++                     wiphy_name(priv->hw->wiphy), __func__);
++              return -EFAULT;
+       }
+-      spin_lock_irqsave(&priv->mgmt_spinlock, flags);
+-      mgmt_buf = priv->next_mgmt_bulk;
+-      priv->next_mgmt_bulk = NULL;
+-      spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
++      if (!skb) {
++              skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
++              if (!skb) {
++                      printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
++                             wiphy_name(priv->hw->wiphy));
++                      ret = -ENOMEM;
++                      goto exit;
++              }
++              priv->rx_skb = skb;
++      } else {
++              skb_push(skb, skb_headroom(skb));
++              skb_trim(skb, 0);
++      }
+-      if (!mgmt_buf) {
+-              netif_wake_queue(priv->netdev);
+-              return;
++      size = skb_tailroom(skb);
++      usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
++                        skb_put(skb, size), size, at76_rx_callback, priv);
++      ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
++      if (ret < 0) {
++              if (ret == -ENODEV)
++                      at76_dbg(DBG_DEVSTART,
++                               "usb_submit_urb returned -ENODEV");
++              else
++                      printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
++                             wiphy_name(priv->hw->wiphy), ret);
+       }
+-      /* we don't copy the padding bytes, but add them
+-         to the length */
+-      memcpy(priv->bulk_out_buffer, mgmt_buf,
+-             le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN);
+-      usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
+-                        priv->bulk_out_buffer,
+-                        le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding +
+-                        AT76_TX_HDRLEN, at76_tx_callback, priv);
+-      ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
+-      if (ret)
+-              printk(KERN_ERR "%s: error in tx submit urb: %d\n",
+-                     priv->netdev->name, ret);
++exit:
++      if (ret < 0 && ret != -ENODEV)
++              printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
++                     "driver and/or power cycle the device\n",
++                     wiphy_name(priv->hw->wiphy));
+-      kfree(mgmt_buf);
++      return ret;
+ }
+-/* Send a management frame on bulk-out.  txbuf->wlength must be set */
+-static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf)
++/* Download external firmware */
++static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
+ {
+-      unsigned long flags;
+       int ret;
+-      int urb_status;
+-      void *oldbuf = NULL;
+-
+-      netif_carrier_off(priv->netdev);        /* stop netdev watchdog */
+-      netif_stop_queue(priv->netdev); /* stop tx data packets */
++      int op_mode;
++      int blockno = 0;
++      int bsize;
++      u8 *block;
++      u8 *buf = fwe->extfw;
++      int size = fwe->extfw_size;
+-      spin_lock_irqsave(&priv->mgmt_spinlock, flags);
++      if (!buf || !size)
++              return -ENOENT;
+-      urb_status = priv->tx_urb->status;
+-      if (urb_status == -EINPROGRESS) {
+-              /* cannot transmit now, put in the queue */
+-              oldbuf = priv->next_mgmt_bulk;
+-              priv->next_mgmt_bulk = txbuf;
+-      }
+-      spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
+-
+-      if (oldbuf) {
+-              /* a data/mgmt tx is already pending in the URB -
+-                 if this is no error in some situations we must
+-                 implement a queue or silently modify the old msg */
+-              printk(KERN_ERR "%s: removed pending mgmt buffer %s\n",
+-                     priv->netdev->name, hex2str(oldbuf, 64));
+-              kfree(oldbuf);
+-              return 0;
+-      }
+-
+-      txbuf->tx_rate = TX_RATE_1MBIT;
+-      txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength));
+-      memset(txbuf->reserved, 0, sizeof(txbuf->reserved));
+-
+-      if (priv->next_mgmt_bulk)
+-              printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n",
+-                     priv->netdev->name, urb_status);
+-
+-      at76_dbg(DBG_TX_MGMT,
+-               "%s: tx mgmt: wlen %d tx_rate %d pad %d %s",
+-               priv->netdev->name, le16_to_cpu(txbuf->wlength),
+-               txbuf->tx_rate, txbuf->padding,
+-               hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength)));
+-
+-      /* txbuf was not consumed above -> send mgmt msg immediately */
+-      memcpy(priv->bulk_out_buffer, txbuf,
+-             le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN);
+-      usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
+-                        priv->bulk_out_buffer,
+-                        le16_to_cpu(txbuf->wlength) + txbuf->padding +
+-                        AT76_TX_HDRLEN, at76_tx_callback, priv);
+-      ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
+-      if (ret)
+-              printk(KERN_ERR "%s: error in tx submit urb: %d\n",
+-                     priv->netdev->name, ret);
+-
+-      kfree(txbuf);
+-
+-      return ret;
+-}
+-
+-/* Go to the next information element */
+-static inline void next_ie(struct ieee80211_info_element **ie)
+-{
+-      *ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]);
+-}
+-
+-/* Challenge is the challenge string (in TLV format)
+-   we got with seq_nr 2 for shared secret authentication only and
+-   send in seq_nr 3 WEP encrypted to prove we have the correct WEP key;
+-   otherwise it is NULL */
+-static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss,
+-                       int seq_nr, struct ieee80211_info_element *challenge)
+-{
+-      struct at76_tx_buffer *tx_buffer;
+-      struct ieee80211_hdr_3addr *mgmt;
+-      struct ieee80211_auth *req;
+-      int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE :
+-                     AUTH_FRAME_SIZE + 1 + 1 + challenge->len);
+-
+-      BUG_ON(!bss);
+-      BUG_ON(seq_nr == 3 && !challenge);
+-      tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC);
+-      if (!tx_buffer)
+-              return -ENOMEM;
+-
+-      req = (struct ieee80211_auth *)tx_buffer->packet;
+-      mgmt = &req->header;
+-
+-      /* make wireless header */
+-      /* first auth msg is not encrypted, only the second (seq_nr == 3) */
+-      mgmt->frame_ctl =
+-          cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH |
+-                      (seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0));
+-
+-      mgmt->duration_id = cpu_to_le16(0x8000);
+-      memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
+-      memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
+-      memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
+-      mgmt->seq_ctl = cpu_to_le16(0);
+-
+-      req->algorithm = cpu_to_le16(priv->auth_mode);
+-      req->transaction = cpu_to_le16(seq_nr);
+-      req->status = cpu_to_le16(0);
+-
+-      if (seq_nr == 3)
+-              memcpy(req->info_element, challenge, 1 + 1 + challenge->len);
+-
+-      /* init. at76_priv tx header */
+-      tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN);
+-      at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %s alg %d seq_nr %d",
+-               priv->netdev->name, mac2str(mgmt->addr3),
+-               le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction));
+-      if (seq_nr == 3)
+-              at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...",
+-                       priv->netdev->name, hex2str(req->info_element, 18));
+-
+-      /* either send immediately (if no data tx is pending
+-         or put it in pending list */
+-      return at76_tx_mgmt(priv, tx_buffer);
+-}
+-
+-static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss)
+-{
+-      struct at76_tx_buffer *tx_buffer;
+-      struct ieee80211_hdr_3addr *mgmt;
+-      struct ieee80211_assoc_request *req;
+-      struct ieee80211_info_element *ie;
+-      char *essid;
+-      int essid_len;
+-      u16 capa;
+-
+-      BUG_ON(!bss);
+-
+-      tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC);
+-      if (!tx_buffer)
+-              return -ENOMEM;
+-
+-      req = (struct ieee80211_assoc_request *)tx_buffer->packet;
+-      mgmt = &req->header;
+-      ie = req->info_element;
+-
+-      /* make wireless header */
+-      mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+-                                    IEEE80211_STYPE_ASSOC_REQ);
+-
+-      mgmt->duration_id = cpu_to_le16(0x8000);
+-      memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
+-      memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
+-      memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
+-      mgmt->seq_ctl = cpu_to_le16(0);
+-
+-      /* we must set the Privacy bit in the capabilities to assure an
+-         Agere-based AP with optional WEP transmits encrypted frames
+-         to us.  AP only set the Privacy bit in their capabilities
+-         if WEP is mandatory in the BSS! */
+-      capa = bss->capa;
+-      if (priv->wep_enabled)
+-              capa |= WLAN_CAPABILITY_PRIVACY;
+-      if (priv->preamble_type != PREAMBLE_TYPE_LONG)
+-              capa |= WLAN_CAPABILITY_SHORT_PREAMBLE;
+-      req->capability = cpu_to_le16(capa);
+-
+-      req->listen_interval = cpu_to_le16(2 * bss->beacon_interval);
+-
+-      /* write TLV data elements */
+-
+-      ie->id = MFIE_TYPE_SSID;
+-      ie->len = bss->ssid_len;
+-      memcpy(ie->data, bss->ssid, bss->ssid_len);
+-      next_ie(&ie);
+-
+-      ie->id = MFIE_TYPE_RATES;
+-      ie->len = sizeof(hw_rates);
+-      memcpy(ie->data, hw_rates, sizeof(hw_rates));
+-      next_ie(&ie);           /* ie points behind the supp_rates field */
+-
+-      /* init. at76_priv tx header */
+-      tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt);
+-
+-      ie = req->info_element;
+-      essid = ie->data;
+-      essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
+-
+-      next_ie(&ie);           /* points to IE of rates now */
+-      at76_dbg(DBG_TX_MGMT,
+-               "%s: AssocReq bssid %s capa 0x%04x ssid %.*s rates %s",
+-               priv->netdev->name, mac2str(mgmt->addr3),
+-               le16_to_cpu(req->capability), essid_len, essid,
+-               hex2str(ie->data, ie->len));
+-
+-      /* either send immediately (if no data tx is pending
+-         or put it in pending list */
+-      return at76_tx_mgmt(priv, tx_buffer);
+-}
+-
+-/* We got to check the bss_list for old entries */
+-static void at76_bss_list_timeout(unsigned long par)
+-{
+-      struct at76_priv *priv = (struct at76_priv *)par;
+-      unsigned long flags;
+-      struct list_head *lptr, *nptr;
+-      struct bss_info *ptr;
+-
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-
+-      list_for_each_safe(lptr, nptr, &priv->bss_list) {
+-
+-              ptr = list_entry(lptr, struct bss_info, list);
+-
+-              if (ptr != priv->curr_bss
+-                  && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) {
+-                      at76_dbg(DBG_BSS_TABLE_RM,
+-                               "%s: bss_list: removing old BSS %s ch %d",
+-                               priv->netdev->name, mac2str(ptr->bssid),
+-                               ptr->channel);
+-                      list_del(&ptr->list);
+-                      kfree(ptr);
+-              }
+-      }
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
+-      /* restart the timer */
+-      mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
+-}
+-
+-static inline void at76_set_mac_state(struct at76_priv *priv,
+-                                    enum mac_state mac_state)
+-{
+-      at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name,
+-               mac_states[mac_state]);
+-      priv->mac_state = mac_state;
+-}
+-
+-static void at76_dump_bss_table(struct at76_priv *priv)
+-{
+-      struct bss_info *ptr;
+-      unsigned long flags;
+-      struct list_head *lptr;
+-
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-
+-      at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name,
+-               priv->curr_bss);
+-
+-      list_for_each(lptr, &priv->bss_list) {
+-              ptr = list_entry(lptr, struct bss_info, list);
+-              at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %s channel %d ssid %.*s "
+-                       "(%s) capa 0x%04x rates %s rssi %d link %d noise %d",
+-                       ptr, mac2str(ptr->bssid), ptr->channel, ptr->ssid_len,
+-                       ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len),
+-                       ptr->capa, hex2str(ptr->rates, ptr->rates_len),
+-                       ptr->rssi, ptr->link_qual, ptr->noise_level);
+-      }
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
+-}
+-
+-/* Called upon successful association to mark interface as connected */
+-static void at76_work_assoc_done(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            work_assoc_done);
+-
+-      mutex_lock(&priv->mtx);
+-
+-      WARN_ON(priv->mac_state != MAC_ASSOC);
+-      WARN_ON(!priv->curr_bss);
+-      if (priv->mac_state != MAC_ASSOC || !priv->curr_bss)
+-              goto exit;
+-
+-      if (priv->iw_mode == IW_MODE_INFRA) {
+-              if (priv->pm_mode != AT76_PM_OFF) {
+-                      /* calculate the listen interval in units of
+-                         beacon intervals of the curr_bss */
+-                      u32 pm_period_beacon = (priv->pm_period >> 10) /
+-                          priv->curr_bss->beacon_interval;
+-
+-                      pm_period_beacon = max(pm_period_beacon, 2u);
+-                      pm_period_beacon = min(pm_period_beacon, 0xffffu);
+-
+-                      at76_dbg(DBG_PM,
+-                               "%s: pm_mode %d assoc id 0x%x listen int %d",
+-                               priv->netdev->name, priv->pm_mode,
+-                               priv->assoc_id, pm_period_beacon);
+-
+-                      at76_set_associd(priv, priv->assoc_id);
+-                      at76_set_listen_interval(priv, (u16)pm_period_beacon);
+-              }
+-              schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT);
+-      }
+-      at76_set_pm_mode(priv);
+-
+-      netif_carrier_on(priv->netdev);
+-      netif_wake_queue(priv->netdev);
+-      at76_set_mac_state(priv, MAC_CONNECTED);
+-      at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid);
+-      at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %s",
+-               priv->netdev->name, mac2str(priv->curr_bss->bssid));
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* We only store the new mac address in netdev struct,
+-   it gets set when the netdev is opened. */
+-static int at76_set_mac_address(struct net_device *netdev, void *addr)
+-{
+-      struct sockaddr *mac = addr;
+-      memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN);
+-      return 1;
+-}
+-
+-static struct net_device_stats *at76_get_stats(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      return &priv->stats;
+-}
+-
+-static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d",
+-               priv->wstats.qual.qual, priv->wstats.qual.level,
+-               priv->wstats.qual.noise, priv->wstats.qual.updated);
+-
+-      return &priv->wstats;
+-}
+-
+-static void at76_set_multicast(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int promisc;
+-
+-      promisc = ((netdev->flags & IFF_PROMISC) != 0);
+-      if (promisc != priv->promisc) {
+-              /* This gets called in interrupt, must reschedule */
+-              priv->promisc = promisc;
+-              schedule_work(&priv->work_set_promisc);
+-      }
+-}
+-
+-/* Stop all network activity, flush all pending tasks */
+-static void at76_quiesce(struct at76_priv *priv)
+-{
+-      unsigned long flags;
+-
+-      netif_stop_queue(priv->netdev);
+-      netif_carrier_off(priv->netdev);
+-
+-      at76_set_mac_state(priv, MAC_INIT);
+-
+-      cancel_delayed_work(&priv->dwork_get_scan);
+-      cancel_delayed_work(&priv->dwork_beacon);
+-      cancel_delayed_work(&priv->dwork_auth);
+-      cancel_delayed_work(&priv->dwork_assoc);
+-      cancel_delayed_work(&priv->dwork_restart);
+-
+-      spin_lock_irqsave(&priv->mgmt_spinlock, flags);
+-      kfree(priv->next_mgmt_bulk);
+-      priv->next_mgmt_bulk = NULL;
+-      spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
+-}
+-
+-/*******************************************************************************
+- * at76_priv implementations of iw_handler functions:
+- */
+-static int at76_iw_handler_commit(struct net_device *netdev,
+-                                struct iw_request_info *info,
+-                                void *null, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name,
+-               __func__);
+-
+-      if (priv->mac_state != MAC_INIT)
+-              at76_quiesce(priv);
+-
+-      /* Wait half second before the restart to process subsequent
+-       * requests from the same iwconfig in a single restart */
+-      schedule_delayed_work(&priv->dwork_restart, HZ / 2);
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_get_name(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  char *name, char *extra)
+-{
+-      strcpy(name, "IEEE 802.11b");
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name);
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_freq(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_freq *freq, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int chan = -1;
+-      int ret = -EIWCOMMIT;
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d",
+-               netdev->name, freq->m, freq->e);
+-
+-      if ((freq->e == 0) && (freq->m <= 1000))
+-              /* Setting by channel number */
+-              chan = freq->m;
+-      else {
+-              /* Setting by frequency - search the table */
+-              int mult = 1;
+-              int i;
+-
+-              for (i = 0; i < (6 - freq->e); i++)
+-                      mult *= 10;
+-
+-              for (i = 0; i < NUM_CHANNELS; i++) {
+-                      if (freq->m == (channel_frequency[i] * mult))
+-                              chan = i + 1;
+-              }
+-      }
+-
+-      if (chan < 1 || !priv->domain)
+-              /* non-positive channels are invalid
+-               * we need a domain info to set the channel
+-               * either that or an invalid frequency was
+-               * provided by the user */
+-              ret = -EINVAL;
+-      else if (!(priv->domain->channel_map & (1 << (chan - 1)))) {
+-              printk(KERN_INFO "%s: channel %d not allowed for domain %s\n",
+-                     priv->netdev->name, chan, priv->domain->name);
+-              ret = -EINVAL;
+-      }
+-
+-      if (ret == -EIWCOMMIT) {
+-              priv->channel = chan;
+-              at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name,
+-                       chan);
+-      }
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_freq(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_freq *freq, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      freq->m = priv->channel;
+-      freq->e = 0;
+-
+-      if (priv->channel)
+-              at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d",
+-                       netdev->name, channel_frequency[priv->channel - 1], 6);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name,
+-               priv->channel);
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_mode(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  __u32 *mode, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode);
+-
+-      if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) &&
+-          (*mode != IW_MODE_MONITOR))
+-              return -EINVAL;
+-
+-      priv->iw_mode = *mode;
+-      if (priv->iw_mode != IW_MODE_INFRA)
+-              priv->pm_mode = AT76_PM_OFF;
+-
+-      return -EIWCOMMIT;
+-}
+-
+-static int at76_iw_handler_get_mode(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  __u32 *mode, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      *mode = priv->iw_mode;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode);
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_get_range(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_point *data, char *extra)
+-{
+-      /* inspired by atmel.c */
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      struct iw_range *range = (struct iw_range *)extra;
+-      int i;
+-
+-      data->length = sizeof(struct iw_range);
+-      memset(range, 0, sizeof(struct iw_range));
+-
+-      /* TODO: range->throughput = xxxxxx; */
+-
+-      range->min_nwid = 0x0000;
+-      range->max_nwid = 0x0000;
+-
+-      /* this driver doesn't maintain sensitivity information */
+-      range->sensitivity = 0;
+-
+-      range->max_qual.qual = 100;
+-      range->max_qual.level = 100;
+-      range->max_qual.noise = 0;
+-      range->max_qual.updated = IW_QUAL_NOISE_INVALID;
+-
+-      range->avg_qual.qual = 50;
+-      range->avg_qual.level = 50;
+-      range->avg_qual.noise = 0;
+-      range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
+-
+-      range->bitrate[0] = 1000000;
+-      range->bitrate[1] = 2000000;
+-      range->bitrate[2] = 5500000;
+-      range->bitrate[3] = 11000000;
+-      range->num_bitrates = 4;
+-
+-      range->min_rts = 0;
+-      range->max_rts = MAX_RTS_THRESHOLD;
+-
+-      range->min_frag = MIN_FRAG_THRESHOLD;
+-      range->max_frag = MAX_FRAG_THRESHOLD;
+-
+-      range->pmp_flags = IW_POWER_PERIOD;
+-      range->pmt_flags = IW_POWER_ON;
+-      range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R;
+-
+-      range->encoding_size[0] = WEP_SMALL_KEY_LEN;
+-      range->encoding_size[1] = WEP_LARGE_KEY_LEN;
+-      range->num_encoding_sizes = 2;
+-      range->max_encoding_tokens = WEP_KEYS;
+-
+-      /* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power
+-         - take this for all (ignore antenna gains) */
+-      range->txpower[0] = 15;
+-      range->num_txpower = 1;
+-      range->txpower_capa = IW_TXPOW_DBM;
+-
+-      range->we_version_source = WIRELESS_EXT;
+-      range->we_version_compiled = WIRELESS_EXT;
+-
+-      /* same as the values used in atmel.c */
+-      range->retry_capa = IW_RETRY_LIMIT;
+-      range->retry_flags = IW_RETRY_LIMIT;
+-      range->r_time_flags = 0;
+-      range->min_retry = 1;
+-      range->max_retry = 255;
+-
+-      range->num_channels = NUM_CHANNELS;
+-      range->num_frequency = 0;
+-
+-      for (i = 0; i < NUM_CHANNELS; i++) {
+-              /* test if channel map bit is raised */
+-              if (priv->domain->channel_map & (0x1 << i)) {
+-                      range->num_frequency += 1;
+-
+-                      range->freq[i].i = i + 1;
+-                      range->freq[i].m = channel_frequency[i] * 100000;
+-                      range->freq[i].e = 1;   /* freq * 10^1 */
+-              }
+-      }
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name);
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_spy(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = 0;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d",
+-               netdev->name, data->length);
+-
+-      spin_lock_bh(&priv->spy_spinlock);
+-      ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data,
+-                               extra);
+-      spin_unlock_bh(&priv->spy_spinlock);
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_spy(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct iw_point *data, char *extra)
+-{
+-
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = 0;
+-
+-      spin_lock_bh(&priv->spy_spinlock);
+-      ret = iw_handler_get_spy(priv->netdev, info,
+-                               (union iwreq_data *)data, extra);
+-      spin_unlock_bh(&priv->spy_spinlock);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d",
+-               netdev->name, data->length);
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_set_thrspy(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)",
+-               netdev->name, data->length);
+-
+-      spin_lock_bh(&priv->spy_spinlock);
+-      ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data,
+-                                  extra);
+-      spin_unlock_bh(&priv->spy_spinlock);
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_thrspy(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret;
+-
+-      spin_lock_bh(&priv->spy_spinlock);
+-      ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data,
+-                                  extra);
+-      spin_unlock_bh(&priv->spy_spinlock);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)",
+-               netdev->name, data->length);
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_set_wap(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct sockaddr *ap_addr, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %s", netdev->name,
+-               mac2str(ap_addr->sa_data));
+-
+-      /* if the incoming address == ff:ff:ff:ff:ff:ff, the user has
+-         chosen any or auto AP preference */
+-      if (is_broadcast_ether_addr(ap_addr->sa_data)
+-          || is_zero_ether_addr(ap_addr->sa_data))
+-              priv->wanted_bssid_valid = 0;
+-      else {
+-              /* user wants to set a preferred AP address */
+-              priv->wanted_bssid_valid = 1;
+-              memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN);
+-      }
+-
+-      return -EIWCOMMIT;
+-}
+-
+-static int at76_iw_handler_get_wap(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct sockaddr *ap_addr, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      ap_addr->sa_family = ARPHRD_ETHER;
+-      memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %s", netdev->name,
+-               mac2str(ap_addr->sa_data));
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_scan(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  union iwreq_data *wrqu, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = 0;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name);
+-
+-      if (mutex_lock_interruptible(&priv->mtx))
+-              return -EINTR;
+-
+-      if (!netif_running(netdev)) {
+-              ret = -ENETDOWN;
+-              goto exit;
+-      }
+-
+-      /* jal: we don't allow "iwlist ethX scan" while we are
+-         in monitor mode */
+-      if (priv->iw_mode == IW_MODE_MONITOR) {
+-              ret = -EBUSY;
+-              goto exit;
+-      }
+-
+-      /* Discard old scan results */
+-      if ((jiffies - priv->last_scan) > (20 * HZ))
+-              priv->scan_state = SCAN_IDLE;
+-      priv->last_scan = jiffies;
+-
+-      /* Initiate a scan command */
+-      if (priv->scan_state == SCAN_IN_PROGRESS) {
+-              ret = -EBUSY;
+-              goto exit;
+-      }
+-
+-      priv->scan_state = SCAN_IN_PROGRESS;
+-
+-      at76_quiesce(priv);
+-
+-      /* Try to do passive or active scan if WE asks as. */
+-      if (wrqu->data.length
+-          && wrqu->data.length == sizeof(struct iw_scan_req)) {
+-              struct iw_scan_req *req = (struct iw_scan_req *)extra;
+-
+-              if (req->scan_type == IW_SCAN_TYPE_PASSIVE)
+-                      priv->scan_mode = SCAN_TYPE_PASSIVE;
+-              else if (req->scan_type == IW_SCAN_TYPE_ACTIVE)
+-                      priv->scan_mode = SCAN_TYPE_ACTIVE;
+-
+-              /* Sanity check values? */
+-              if (req->min_channel_time > 0)
+-                      priv->scan_min_time = req->min_channel_time;
+-
+-              if (req->max_channel_time > 0)
+-                      priv->scan_max_time = req->max_channel_time;
+-      }
+-
+-      /* change to scanning state */
+-      at76_set_mac_state(priv, MAC_SCANNING);
+-      schedule_work(&priv->work_start_scan);
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_scan(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      unsigned long flags;
+-      struct list_head *lptr, *nptr;
+-      struct bss_info *curr_bss;
+-      struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL);
+-      char *curr_val, *curr_pos = extra;
+-      int i;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name);
+-
+-      if (!iwe)
+-              return -ENOMEM;
+-
+-      if (priv->scan_state != SCAN_COMPLETED) {
+-              /* scan not yet finished */
+-              kfree(iwe);
+-              return -EAGAIN;
+-      }
+-
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-
+-      list_for_each_safe(lptr, nptr, &priv->bss_list) {
+-              curr_bss = list_entry(lptr, struct bss_info, list);
+-
+-              iwe->cmd = SIOCGIWAP;
+-              iwe->u.ap_addr.sa_family = ARPHRD_ETHER;
+-              memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6);
+-              curr_pos = iwe_stream_add_event(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              IW_EV_ADDR_LEN);
+-
+-              iwe->u.data.length = curr_bss->ssid_len;
+-              iwe->cmd = SIOCGIWESSID;
+-              iwe->u.data.flags = 1;
+-
+-              curr_pos = iwe_stream_add_point(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              curr_bss->ssid);
+-
+-              iwe->cmd = SIOCGIWMODE;
+-              iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ?
+-                  IW_MODE_ADHOC :
+-                  (curr_bss->capa & WLAN_CAPABILITY_ESS) ?
+-                  IW_MODE_MASTER : IW_MODE_AUTO;
+-              /* IW_MODE_AUTO = 0 which I thought is
+-               * the most logical value to return in this case */
+-              curr_pos = iwe_stream_add_event(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              IW_EV_UINT_LEN);
+-
+-              iwe->cmd = SIOCGIWFREQ;
+-              iwe->u.freq.m = curr_bss->channel;
+-              iwe->u.freq.e = 0;
+-              curr_pos = iwe_stream_add_event(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              IW_EV_FREQ_LEN);
+-
+-              iwe->cmd = SIOCGIWENCODE;
+-              if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY)
+-                      iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+-              else
+-                      iwe->u.data.flags = IW_ENCODE_DISABLED;
+-
+-              iwe->u.data.length = 0;
+-              curr_pos = iwe_stream_add_point(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              NULL);
+-
+-              /* Add quality statistics */
+-              iwe->cmd = IWEVQUAL;
+-              iwe->u.qual.noise = 0;
+-              iwe->u.qual.updated =
+-                  IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED;
+-              iwe->u.qual.level = (curr_bss->rssi * 100 / 42);
+-              if (iwe->u.qual.level > 100)
+-                      iwe->u.qual.level = 100;
+-              if (at76_is_intersil(priv->board_type))
+-                      iwe->u.qual.qual = curr_bss->link_qual;
+-              else {
+-                      iwe->u.qual.qual = 0;
+-                      iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID;
+-              }
+-              /* Add new value to event */
+-              curr_pos = iwe_stream_add_event(info, curr_pos,
+-                                              extra + IW_SCAN_MAX_DATA, iwe,
+-                                              IW_EV_QUAL_LEN);
+-
+-              /* Rate: stuffing multiple values in a single event requires
+-               * a bit more of magic - Jean II */
+-              curr_val = curr_pos + IW_EV_LCP_LEN;
+-
+-              iwe->cmd = SIOCGIWRATE;
+-              /* Those two flags are ignored... */
+-              iwe->u.bitrate.fixed = 0;
+-              iwe->u.bitrate.disabled = 0;
+-              /* Max 8 values */
+-              for (i = 0; i < curr_bss->rates_len; i++) {
+-                      /* Bit rate given in 500 kb/s units (+ 0x80) */
+-                      iwe->u.bitrate.value =
+-                          ((curr_bss->rates[i] & 0x7f) * 500000);
+-                      /* Add new value to event */
+-                      curr_val = iwe_stream_add_value(info, curr_pos,
+-                                                      curr_val,
+-                                                      extra +
+-                                                      IW_SCAN_MAX_DATA, iwe,
+-                                                      IW_EV_PARAM_LEN);
+-              }
+-
+-              /* Check if we added any event */
+-              if ((curr_val - curr_pos) > IW_EV_LCP_LEN)
+-                      curr_pos = curr_val;
+-
+-              /* more information may be sent back using IWECUSTOM */
+-
+-      }
+-
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
+-
+-      data->length = (curr_pos - extra);
+-      data->flags = 0;
+-
+-      kfree(iwe);
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_essid(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra);
+-
+-      if (data->flags) {
+-              memcpy(priv->essid, extra, data->length);
+-              priv->essid_size = data->length;
+-      } else
+-              priv->essid_size = 0;   /* Use any SSID */
+-
+-      return -EIWCOMMIT;
+-}
+-
+-static int at76_iw_handler_get_essid(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_point *data, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      if (priv->essid_size) {
+-              /* not the ANY ssid in priv->essid */
+-              data->flags = 1;
+-              data->length = priv->essid_size;
+-              memcpy(extra, priv->essid, data->length);
+-      } else {
+-              /* the ANY ssid was specified */
+-              if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) {
+-                      /* report the SSID we have found */
+-                      data->flags = 1;
+-                      data->length = priv->curr_bss->ssid_len;
+-                      memcpy(extra, priv->curr_bss->ssid, data->length);
+-              } else {
+-                      /* report ANY back */
+-                      data->flags = 0;
+-                      data->length = 0;
+-              }
+-      }
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name,
+-               data->length, extra);
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_rate(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_param *bitrate, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name,
+-               bitrate->value);
+-
+-      switch (bitrate->value) {
+-      case -1:
+-              priv->txrate = TX_RATE_AUTO;
+-              break;          /* auto rate */
+-      case 1000000:
+-              priv->txrate = TX_RATE_1MBIT;
+-              break;
+-      case 2000000:
+-              priv->txrate = TX_RATE_2MBIT;
+-              break;
+-      case 5500000:
+-              priv->txrate = TX_RATE_5_5MBIT;
+-              break;
+-      case 11000000:
+-              priv->txrate = TX_RATE_11MBIT;
+-              break;
+-      default:
+-              ret = -EINVAL;
+-      }
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_rate(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_param *bitrate, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = 0;
+-
+-      switch (priv->txrate) {
+-              /* return max rate if RATE_AUTO */
+-      case TX_RATE_AUTO:
+-              bitrate->value = 11000000;
+-              break;
+-      case TX_RATE_1MBIT:
+-              bitrate->value = 1000000;
+-              break;
+-      case TX_RATE_2MBIT:
+-              bitrate->value = 2000000;
+-              break;
+-      case TX_RATE_5_5MBIT:
+-              bitrate->value = 5500000;
+-              break;
+-      case TX_RATE_11MBIT:
+-              bitrate->value = 11000000;
+-              break;
+-      default:
+-              ret = -EINVAL;
+-      }
+-
+-      bitrate->fixed = (priv->txrate != TX_RATE_AUTO);
+-      bitrate->disabled = 0;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name,
+-               bitrate->value);
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_set_rts(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct iw_param *rts, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = -EIWCOMMIT;
+-      int rthr = rts->value;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s",
+-               netdev->name, rts->value, (rts->disabled) ? "true" : "false");
+-
+-      if (rts->disabled)
+-              rthr = MAX_RTS_THRESHOLD;
+-
+-      if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD))
+-              ret = -EINVAL;
+-      else
+-              priv->rts_threshold = rthr;
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_rts(struct net_device *netdev,
+-                                 struct iw_request_info *info,
+-                                 struct iw_param *rts, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      rts->value = priv->rts_threshold;
+-      rts->disabled = (rts->value >= MAX_RTS_THRESHOLD);
+-      rts->fixed = 1;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s",
+-               netdev->name, rts->value, (rts->disabled) ? "true" : "false");
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_frag(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_param *frag, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = -EIWCOMMIT;
+-      int fthr = frag->value;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s",
+-               netdev->name, frag->value,
+-               (frag->disabled) ? "true" : "false");
+-
+-      if (frag->disabled)
+-              fthr = MAX_FRAG_THRESHOLD;
+-
+-      if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD))
+-              ret = -EINVAL;
+-      else
+-              priv->frag_threshold = fthr & ~0x1;     /* get an even value */
+-
+-      return ret;
+-}
+-
+-static int at76_iw_handler_get_frag(struct net_device *netdev,
+-                                  struct iw_request_info *info,
+-                                  struct iw_param *frag, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      frag->value = priv->frag_threshold;
+-      frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD);
+-      frag->fixed = 1;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s",
+-               netdev->name, frag->value,
+-               (frag->disabled) ? "true" : "false");
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_get_txpow(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_param *power, char *extra)
+-{
+-      power->value = 15;
+-      power->fixed = 1;       /* No power control */
+-      power->disabled = 0;
+-      power->flags = IW_TXPOW_DBM;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name,
+-               power->value);
+-
+-      return 0;
+-}
+-
+-/* jal: short retry is handled by the firmware (at least 0.90.x),
+-   while long retry is not (?) */
+-static int at76_iw_handler_set_retry(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_param *retry, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d",
+-               netdev->name, retry->disabled, retry->flags, retry->value);
+-
+-      if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) {
+-              if ((retry->flags & IW_RETRY_MIN) ||
+-                  !(retry->flags & IW_RETRY_MAX))
+-                      priv->short_retry_limit = retry->value;
+-              else
+-                      ret = -EINVAL;
+-      } else
+-              ret = -EINVAL;
+-
+-      return ret;
+-}
+-
+-/* Adapted (ripped) from atmel.c */
+-static int at76_iw_handler_get_retry(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_param *retry, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name);
+-
+-      retry->disabled = 0;    /* Can't be disabled */
+-      retry->flags = IW_RETRY_LIMIT;
+-      retry->value = priv->short_retry_limit;
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_encode(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    struct iw_point *encoding, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
+-      int len = encoding->length;
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x "
+-               "pointer %p len %d", netdev->name, encoding->flags,
+-               encoding->pointer, encoding->length);
+-      at76_dbg(DBG_IOCTL,
+-               "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d "
+-               "auth_mode %s", netdev->name,
+-               (priv->wep_enabled) ? "true" : "false", priv->wep_key_id,
+-               (priv->auth_mode ==
+-                WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
+-
+-      /* take the old default key if index is invalid */
+-      if ((index < 0) || (index >= WEP_KEYS))
+-              index = priv->wep_key_id;
+-
+-      if (len > 0) {
+-              if (len > WEP_LARGE_KEY_LEN)
+-                      len = WEP_LARGE_KEY_LEN;
+-
+-              memset(priv->wep_keys[index], 0, WEP_KEY_LEN);
+-              memcpy(priv->wep_keys[index], extra, len);
+-              priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ?
+-                  WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
+-              priv->wep_enabled = 1;
+-      }
+-
+-      priv->wep_key_id = index;
+-      priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0);
+-
+-      if (encoding->flags & IW_ENCODE_RESTRICTED)
+-              priv->auth_mode = WLAN_AUTH_SHARED_KEY;
+-      if (encoding->flags & IW_ENCODE_OPEN)
+-              priv->auth_mode = WLAN_AUTH_OPEN;
+-
+-      at76_dbg(DBG_IOCTL,
+-               "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d "
+-               "key_len %d auth_mode %s", netdev->name,
+-               (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
+-               priv->wep_keys_len[priv->wep_key_id],
+-               (priv->auth_mode ==
+-                WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
+-
+-      return -EIWCOMMIT;
+-}
+-
+-static int at76_iw_handler_get_encode(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    struct iw_point *encoding, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
+-
+-      if ((index < 0) || (index >= WEP_KEYS))
+-              index = priv->wep_key_id;
+-
+-      encoding->flags =
+-          (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ?
+-          IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN;
+-
+-      if (!priv->wep_enabled)
+-              encoding->flags |= IW_ENCODE_DISABLED;
+-
+-      if (encoding->pointer) {
+-              encoding->length = priv->wep_keys_len[index];
+-
+-              memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]);
+-
+-              encoding->flags |= (index + 1);
+-      }
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x "
+-               "pointer %p len %d", netdev->name, encoding->flags,
+-               encoding->pointer, encoding->length);
+-      at76_dbg(DBG_IOCTL,
+-               "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d "
+-               "key_len %d auth_mode %s", netdev->name,
+-               (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
+-               priv->wep_keys_len[priv->wep_key_id],
+-               (priv->auth_mode ==
+-                WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
+-
+-      return 0;
+-}
+-
+-static int at76_iw_handler_set_power(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_param *prq, char *extra)
+-{
+-      int err = -EIWCOMMIT;
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_IOCTL,
+-               "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x",
+-               netdev->name, (prq->disabled) ? "true" : "false", prq->flags,
+-               prq->value);
+-
+-      if (prq->disabled)
+-              priv->pm_mode = AT76_PM_OFF;
+-      else {
+-              switch (prq->flags & IW_POWER_MODE) {
+-              case IW_POWER_ALL_R:
+-              case IW_POWER_ON:
+-                      break;
+-              default:
+-                      err = -EINVAL;
+-                      goto exit;
+-              }
+-              if (prq->flags & IW_POWER_PERIOD)
+-                      priv->pm_period = prq->value;
+-
+-              if (prq->flags & IW_POWER_TIMEOUT) {
+-                      err = -EINVAL;
+-                      goto exit;
+-              }
+-              priv->pm_mode = AT76_PM_ON;
+-      }
+-exit:
+-      return err;
+-}
+-
+-static int at76_iw_handler_get_power(struct net_device *netdev,
+-                                   struct iw_request_info *info,
+-                                   struct iw_param *power, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      power->disabled = (priv->pm_mode == AT76_PM_OFF);
+-      if (!power->disabled) {
+-              power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R;
+-              power->value = priv->pm_period;
+-      }
+-
+-      at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x",
+-               netdev->name, power->disabled ? "disabled" : "enabled",
+-               power->flags, power->value);
+-
+-      return 0;
+-}
+-
+-/*******************************************************************************
+- * Private IOCTLS
+- */
+-static int at76_iw_set_short_preamble(struct net_device *netdev,
+-                                    struct iw_request_info *info, char *name,
+-                                    char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int val = *((int *)name);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d",
+-               netdev->name, val);
+-
+-      if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO)
+-              ret = -EINVAL;
+-      else
+-              priv->preamble_type = val;
+-
+-      return ret;
+-}
+-
+-static int at76_iw_get_short_preamble(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    union iwreq_data *wrqu, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)",
+-               preambles[priv->preamble_type], priv->preamble_type);
+-      return 0;
+-}
+-
+-static int at76_iw_set_debug(struct net_device *netdev,
+-                           struct iw_request_info *info,
+-                           struct iw_point *data, char *extra)
+-{
+-      char *ptr;
+-      u32 val;
+-
+-      if (data->length > 0) {
+-              val = simple_strtol(extra, &ptr, 0);
+-
+-              if (ptr == extra)
+-                      val = DBG_DEFAULTS;
+-
+-              at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x",
+-                       netdev->name, data->length, extra, val);
+-      } else
+-              val = DBG_DEFAULTS;
+-
+-      at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x",
+-               netdev->name, at76_debug, val);
+-
+-      /* jal: some more output to pin down lockups */
+-      at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d "
+-               "carrier_ok %d", netdev->name, netif_running(netdev),
+-               netif_queue_stopped(netdev), netif_carrier_ok(netdev));
+-
+-      at76_debug = val;
+-
+-      return 0;
+-}
+-
+-static int at76_iw_get_debug(struct net_device *netdev,
+-                           struct iw_request_info *info,
+-                           union iwreq_data *wrqu, char *extra)
+-{
+-      snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug);
+-      return 0;
+-}
+-
+-static int at76_iw_set_powersave_mode(struct net_device *netdev,
+-                                    struct iw_request_info *info, char *name,
+-                                    char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int val = *((int *)name);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)",
+-               netdev->name, val,
+-               val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" :
+-               val == AT76_PM_SMART ? "smart save" : "<invalid>");
+-      if (val < AT76_PM_OFF || val > AT76_PM_SMART)
+-              ret = -EINVAL;
+-      else
+-              priv->pm_mode = val;
+-
+-      return ret;
+-}
+-
+-static int at76_iw_get_powersave_mode(struct net_device *netdev,
+-                                    struct iw_request_info *info,
+-                                    union iwreq_data *wrqu, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int *param = (int *)extra;
+-
+-      param[0] = priv->pm_mode;
+-      return 0;
+-}
+-
+-static int at76_iw_set_scan_times(struct net_device *netdev,
+-                                struct iw_request_info *info, char *name,
+-                                char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int mint = *((int *)name);
+-      int maxt = *((int *)name + 1);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d",
+-               netdev->name, mint, maxt);
+-      if (mint <= 0 || maxt <= 0 || mint > maxt)
+-              ret = -EINVAL;
+-      else {
+-              priv->scan_min_time = mint;
+-              priv->scan_max_time = maxt;
+-      }
+-
+-      return ret;
+-}
+-
+-static int at76_iw_get_scan_times(struct net_device *netdev,
+-                                struct iw_request_info *info,
+-                                union iwreq_data *wrqu, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int *param = (int *)extra;
+-
+-      param[0] = priv->scan_min_time;
+-      param[1] = priv->scan_max_time;
+-      return 0;
+-}
+-
+-static int at76_iw_set_scan_mode(struct net_device *netdev,
+-                               struct iw_request_info *info, char *name,
+-                               char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int val = *((int *)name);
+-      int ret = -EIWCOMMIT;
+-
+-      at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s",
+-               netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" :
+-               (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>");
+-
+-      if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE)
+-              ret = -EINVAL;
+-      else
+-              priv->scan_mode = val;
+-
+-      return ret;
+-}
+-
+-static int at76_iw_get_scan_mode(struct net_device *netdev,
+-                               struct iw_request_info *info,
+-                               union iwreq_data *wrqu, char *extra)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int *param = (int *)extra;
+-
+-      param[0] = priv->scan_mode;
+-      return 0;
+-}
+-
+-#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f
+-
+-/* Standard wireless handlers */
+-static const iw_handler at76_handlers[] = {
+-      AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit),
+-      AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name),
+-      AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq),
+-      AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq),
+-      AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode),
+-      AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode),
+-      AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range),
+-      AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy),
+-      AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy),
+-      AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy),
+-      AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy),
+-      AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap),
+-      AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap),
+-      AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan),
+-      AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan),
+-      AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid),
+-      AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid),
+-      AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate),
+-      AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate),
+-      AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts),
+-      AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts),
+-      AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag),
+-      AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag),
+-      AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow),
+-      AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry),
+-      AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry),
+-      AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode),
+-      AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode),
+-      AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power),
+-      AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power)
+-};
+-
+-#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f
+-
+-/* Private wireless handlers */
+-static const iw_handler at76_priv_handlers[] = {
+-      AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble),
+-      AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble),
+-      AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug),
+-      AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug),
+-      AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode),
+-      AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode),
+-      AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times),
+-      AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times),
+-      AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode),
+-      AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode),
+-};
+-
+-/* Names and arguments of private wireless handlers */
+-static const struct iw_priv_args at76_priv_args[] = {
+-      /* 0 - long, 1 - short */
+-      {AT76_SET_SHORT_PREAMBLE,
+-       IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
+-
+-      {AT76_GET_SHORT_PREAMBLE,
+-       0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"},
+-
+-      /* we must pass the new debug mask as a string, because iwpriv cannot
+-       * parse hex numbers starting with 0x :-(  */
+-      {AT76_SET_DEBUG,
+-       IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"},
+-
+-      {AT76_GET_DEBUG,
+-       0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"},
+-
+-      /* 1 - active, 2 - power save, 3 - smart power save */
+-      {AT76_SET_POWERSAVE_MODE,
+-       IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"},
+-
+-      {AT76_GET_POWERSAVE_MODE,
+-       0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"},
+-
+-      /* min_channel_time, max_channel_time */
+-      {AT76_SET_SCAN_TIMES,
+-       IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"},
+-
+-      {AT76_GET_SCAN_TIMES,
+-       0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"},
+-
+-      /* 0 - active, 1 - passive scan */
+-      {AT76_SET_SCAN_MODE,
+-       IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"},
+-
+-      {AT76_GET_SCAN_MODE,
+-       0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"},
+-};
+-
+-static const struct iw_handler_def at76_handler_def = {
+-      .num_standard = ARRAY_SIZE(at76_handlers),
+-      .num_private = ARRAY_SIZE(at76_priv_handlers),
+-      .num_private_args = ARRAY_SIZE(at76_priv_args),
+-      .standard = at76_handlers,
+-      .private = at76_priv_handlers,
+-      .private_args = at76_priv_args,
+-      .get_wireless_stats = at76_get_wireless_stats,
+-};
+-
+-static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 };
+-
+-/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with
+- * a SNAP OID of 0 (0x00, 0x00, 0x00) */
+-static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+-
+-static int at76_tx(struct sk_buff *skb, struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      struct net_device_stats *stats = &priv->stats;
+-      int ret = 0;
+-      int wlen;
+-      int submit_len;
+-      struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
+-      struct ieee80211_hdr_3addr *i802_11_hdr =
+-          (struct ieee80211_hdr_3addr *)tx_buffer->packet;
+-      u8 *payload = i802_11_hdr->payload;
+-      struct ethhdr *eh = (struct ethhdr *)skb->data;
+-
+-      if (netif_queue_stopped(netdev)) {
+-              printk(KERN_ERR "%s: %s called while netdev is stopped\n",
+-                     netdev->name, __func__);
+-              /* skip this packet */
+-              dev_kfree_skb(skb);
+-              return 0;
+-      }
+-
+-      if (priv->tx_urb->status == -EINPROGRESS) {
+-              printk(KERN_ERR "%s: %s called while tx urb is pending\n",
+-                     netdev->name, __func__);
+-              /* skip this packet */
+-              dev_kfree_skb(skb);
+-              return 0;
+-      }
+-
+-      if (skb->len < ETH_HLEN) {
+-              printk(KERN_ERR "%s: %s: skb too short (%d)\n",
+-                     netdev->name, __func__, skb->len);
+-              dev_kfree_skb(skb);
+-              return 0;
+-      }
+-
+-      at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */
+-
+-      /* we can get rid of memcpy if we set netdev->hard_header_len to
+-         reserve enough space, but we would need to keep the skb around */
+-
+-      if (ntohs(eh->h_proto) <= ETH_DATA_LEN) {
+-              /* this is a 802.3 packet */
+-              if (skb->len >= ETH_HLEN + sizeof(rfc1042sig)
+-                  && skb->data[ETH_HLEN] == rfc1042sig[0]
+-                  && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) {
+-                      /* higher layer delivered SNAP header - keep it */
+-                      memcpy(payload, skb->data + ETH_HLEN,
+-                             skb->len - ETH_HLEN);
+-                      wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN;
+-              } else {
+-                      printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet "
+-                             "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n",
+-                             priv->netdev->name, skb->data[ETH_HLEN],
+-                             skb->data[ETH_HLEN + 1],
+-                             skb->data[ETH_HLEN + 2]);
+-                      dev_kfree_skb(skb);
+-                      return 0;
+-              }
+-      } else {
+-              /* add RFC 1042 header in front */
+-              memcpy(payload, rfc1042sig, sizeof(rfc1042sig));
+-              memcpy(payload + sizeof(rfc1042sig), &eh->h_proto,
+-                     skb->len - offsetof(struct ethhdr, h_proto));
+-              wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len -
+-                  offsetof(struct ethhdr, h_proto);
+-      }
+-
+-      /* make wireless header */
+-      i802_11_hdr->frame_ctl =
+-          cpu_to_le16(IEEE80211_FTYPE_DATA |
+-                      (priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) |
+-                      (priv->iw_mode ==
+-                       IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0));
+-
+-      if (priv->iw_mode == IW_MODE_ADHOC) {
+-              memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN);
+-              memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
+-              memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN);
+-      } else if (priv->iw_mode == IW_MODE_INFRA) {
+-              memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN);
+-              memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
+-              memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN);
+-      }
+-
+-      i802_11_hdr->duration_id = cpu_to_le16(0);
+-      i802_11_hdr->seq_ctl = cpu_to_le16(0);
+-
+-      /* setup 'Atmel' header */
+-      tx_buffer->wlength = cpu_to_le16(wlen);
+-      tx_buffer->tx_rate = priv->txrate;
+-      /* for broadcast destination addresses, the firmware 0.100.x
+-         seems to choose the highest rate set with CMD_STARTUP in
+-         basic_rate_set replacing this value */
+-
+-      memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
+-
+-      tx_buffer->padding = at76_calc_padding(wlen);
+-      submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding;
+-
+-      at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name,
+-               hex2str(skb->data, 32));
+-      at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s",
+-               priv->netdev->name,
+-               le16_to_cpu(tx_buffer->wlength),
+-               tx_buffer->padding, tx_buffer->tx_rate,
+-               hex2str(i802_11_hdr, sizeof(*i802_11_hdr)));
+-      at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name,
+-               hex2str(payload, 48));
+-
+-      /* send stuff */
+-      netif_stop_queue(netdev);
+-      netdev->trans_start = jiffies;
+-
+-      usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
+-                        submit_len, at76_tx_callback, priv);
+-      ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
+-      if (ret) {
+-              stats->tx_errors++;
+-              printk(KERN_ERR "%s: error in tx submit urb: %d\n",
+-                     netdev->name, ret);
+-              if (ret == -EINVAL)
+-                      printk(KERN_ERR
+-                             "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
+-                             priv->netdev->name, priv->tx_urb,
+-                             priv->tx_urb->hcpriv, priv->tx_urb->complete);
+-      } else {
+-              stats->tx_bytes += skb->len;
+-              dev_kfree_skb(skb);
+-      }
+-
+-      return ret;
+-}
+-
+-static void at76_tx_timeout(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      if (!priv)
+-              return;
+-      dev_warn(&netdev->dev, "tx timeout.");
+-
+-      usb_unlink_urb(priv->tx_urb);
+-      priv->stats.tx_errors++;
+-}
+-
+-static int at76_submit_rx_urb(struct at76_priv *priv)
+-{
+-      int ret;
+-      int size;
+-      struct sk_buff *skb = priv->rx_skb;
+-
+-      if (!priv->rx_urb) {
+-              printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
+-                     priv->netdev->name, __func__);
+-              return -EFAULT;
+-      }
+-
+-      if (!skb) {
+-              skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
+-              if (!skb) {
+-                      printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
+-                             priv->netdev->name);
+-                      ret = -ENOMEM;
+-                      goto exit;
+-              }
+-              priv->rx_skb = skb;
+-      } else {
+-              skb_push(skb, skb_headroom(skb));
+-              skb_trim(skb, 0);
+-      }
+-
+-      size = skb_tailroom(skb);
+-      usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
+-                        skb_put(skb, size), size, at76_rx_callback, priv);
+-      ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
+-      if (ret < 0) {
+-              if (ret == -ENODEV)
+-                      at76_dbg(DBG_DEVSTART,
+-                               "usb_submit_urb returned -ENODEV");
+-              else
+-                      printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
+-                             priv->netdev->name, ret);
+-      }
+-
+-exit:
+-      if (ret < 0 && ret != -ENODEV)
+-              printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
+-                     "driver and/or power cycle the device\n",
+-                     priv->netdev->name);
+-
+-      return ret;
+-}
+-
+-static int at76_open(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      int ret = 0;
+-
+-      at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__);
+-
+-      if (mutex_lock_interruptible(&priv->mtx))
+-              return -EINTR;
+-
+-      /* if netdev->dev_addr != priv->mac_addr we must
+-         set the mac address in the device ! */
+-      if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) {
+-              if (at76_add_mac_address(priv, netdev->dev_addr) >= 0)
+-                      at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %s",
+-                               netdev->name, mac2str(netdev->dev_addr));
+-      }
+-
+-      priv->scan_state = SCAN_IDLE;
+-      priv->last_scan = jiffies;
+-
+-      ret = at76_submit_rx_urb(priv);
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
+-                     netdev->name, ret);
+-              goto error;
+-      }
+-
+-      schedule_delayed_work(&priv->dwork_restart, 0);
+-
+-      at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__);
+-error:
+-      mutex_unlock(&priv->mtx);
+-      return ret < 0 ? ret : 0;
+-}
+-
+-static int at76_stop(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__);
+-
+-      if (mutex_lock_interruptible(&priv->mtx))
+-              return -EINTR;
+-
+-      at76_quiesce(priv);
+-
+-      if (!priv->device_unplugged) {
+-              /* We are called by "ifconfig ethX down", not because the
+-               * device is not available anymore. */
+-              at76_set_radio(priv, 0);
+-
+-              /* We unlink rx_urb because at76_open() re-submits it.
+-               * If unplugged, at76_delete_device() takes care of it. */
+-              usb_kill_urb(priv->rx_urb);
+-      }
+-
+-      /* free the bss_list */
+-      at76_free_bss_list(priv);
+-
+-      mutex_unlock(&priv->mtx);
+-      at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__);
+-
+-      return 0;
+-}
+-
+-static void at76_ethtool_get_drvinfo(struct net_device *netdev,
+-                                   struct ethtool_drvinfo *info)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-
+-      strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+-      strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+-
+-      usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info));
+-
+-      snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d",
+-               priv->fw_version.major, priv->fw_version.minor,
+-               priv->fw_version.patch, priv->fw_version.build);
+-}
+-
+-static u32 at76_ethtool_get_link(struct net_device *netdev)
+-{
+-      struct at76_priv *priv = netdev_priv(netdev);
+-      return priv->mac_state == MAC_CONNECTED;
+-}
+-
+-static struct ethtool_ops at76_ethtool_ops = {
+-      .get_drvinfo = at76_ethtool_get_drvinfo,
+-      .get_link = at76_ethtool_get_link,
+-};
+-
+-/* Download external firmware */
+-static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
+-{
+-      int ret;
+-      int op_mode;
+-      int blockno = 0;
+-      int bsize;
+-      u8 *block;
+-      u8 *buf = fwe->extfw;
+-      int size = fwe->extfw_size;
+-
+-      if (!buf || !size)
+-              return -ENOENT;
+-
+-      op_mode = at76_get_op_mode(udev);
+-      at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
++      op_mode = at76_get_op_mode(udev);
++      at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
+       if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+               dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
+@@ -3458,444 +1423,44 @@
+ exit:
+       kfree(block);
+       if (ret < 0)
+-              dev_printk(KERN_ERR, &udev->dev,
+-                         "downloading external firmware failed: %d\n", ret);
+-      return ret;
+-}
+-
+-/* Download internal firmware */
+-static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
+-{
+-      int ret;
+-      int need_remap = !at76_is_505a(fwe->board_type);
+-
+-      ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
+-                                 need_remap ? 0 : 2 * HZ);
+-
+-      if (ret < 0) {
+-              dev_printk(KERN_ERR, &udev->dev,
+-                         "downloading internal fw failed with %d\n", ret);
+-              goto exit;
+-      }
+-
+-      at76_dbg(DBG_DEVSTART, "sending REMAP");
+-
+-      /* no REMAP for 505A (see SF driver) */
+-      if (need_remap) {
+-              ret = at76_remap(udev);
+-              if (ret < 0) {
+-                      dev_printk(KERN_ERR, &udev->dev,
+-                                 "sending REMAP failed with %d\n", ret);
+-                      goto exit;
+-              }
+-      }
+-
+-      at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
+-      schedule_timeout_interruptible(2 * HZ + 1);
+-      usb_reset_device(udev);
+-
+-exit:
+-      return ret;
+-}
+-
+-static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      /* common criteria for both modi */
+-
+-      int ret = (priv->essid_size == 0 /* ANY ssid */  ||
+-                 (priv->essid_size == ptr->ssid_len &&
+-                  !memcmp(priv->essid, ptr->ssid, ptr->ssid_len)));
+-      if (!ret)
+-              at76_dbg(DBG_BSS_MATCH,
+-                       "%s bss table entry %p: essid didn't match",
+-                       priv->netdev->name, ptr);
+-      return ret;
+-}
+-
+-static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      int ret;
+-
+-      if (priv->iw_mode == IW_MODE_ADHOC)
+-              ret = ptr->capa & WLAN_CAPABILITY_IBSS;
+-      else
+-              ret = ptr->capa & WLAN_CAPABILITY_ESS;
+-      if (!ret)
+-              at76_dbg(DBG_BSS_MATCH,
+-                       "%s bss table entry %p: mode didn't match",
+-                       priv->netdev->name, ptr);
+-      return ret;
+-}
+-
+-static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      int i;
+-
+-      for (i = 0; i < ptr->rates_len; i++) {
+-              u8 rate = ptr->rates[i];
+-
+-              if (!(rate & 0x80))
+-                      continue;
+-
+-              /* this is a basic rate we have to support
+-                 (see IEEE802.11, ch. 7.3.2.2) */
+-              if (rate != (0x80 | hw_rates[0])
+-                  && rate != (0x80 | hw_rates[1])
+-                  && rate != (0x80 | hw_rates[2])
+-                  && rate != (0x80 | hw_rates[3])) {
+-                      at76_dbg(DBG_BSS_MATCH,
+-                               "%s: bss table entry %p: basic rate %02x not "
+-                               "supported", priv->netdev->name, ptr, rate);
+-                      return 0;
+-              }
+-      }
+-
+-      /* if we use short preamble, the bss must support it */
+-      if (priv->preamble_type == PREAMBLE_TYPE_SHORT &&
+-          !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) {
+-              at76_dbg(DBG_BSS_MATCH,
+-                       "%s: %p does not support short preamble",
+-                       priv->netdev->name, ptr);
+-              return 0;
+-      } else
+-              return 1;
+-}
+-
+-static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) {
+-              /* we have disabled WEP, but the BSS signals privacy */
+-              at76_dbg(DBG_BSS_MATCH,
+-                       "%s: bss table entry %p: requires encryption",
+-                       priv->netdev->name, ptr);
+-              return 0;
+-      }
+-      /* otherwise if the BSS does not signal privacy it may well
+-         accept encrypted packets from us ... */
+-      return 1;
+-}
+-
+-static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr)
+-{
+-      if (!priv->wanted_bssid_valid ||
+-          !compare_ether_addr(ptr->bssid, priv->wanted_bssid))
+-              return 1;
+-
+-      at76_dbg(DBG_BSS_MATCH,
+-               "%s: requested bssid - %s does not match",
+-               priv->netdev->name, mac2str(priv->wanted_bssid));
+-      at76_dbg(DBG_BSS_MATCH,
+-               "      AP bssid - %s of bss table entry %p",
+-               mac2str(ptr->bssid), ptr);
+-      return 0;
+-}
+-
+-/**
+- * at76_match_bss - try to find a matching bss in priv->bss
+- *
+- * last - last bss tried
+- *
+- * last == NULL signals a new round starting with priv->bss_list.next
+- * this function must be called inside an acquired priv->bss_list_spinlock
+- * otherwise the timeout on bss may remove the newly chosen entry
+- */
+-static struct bss_info *at76_match_bss(struct at76_priv *priv,
+-                                     struct bss_info *last)
+-{
+-      struct bss_info *ptr = NULL;
+-      struct list_head *curr;
+-
+-      curr = last ? last->list.next : priv->bss_list.next;
+-      while (curr != &priv->bss_list) {
+-              ptr = list_entry(curr, struct bss_info, list);
+-              if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr)
+-                  && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr)
+-                  && at76_match_bssid(priv, ptr))
+-                      break;
+-              curr = curr->next;
+-      }
+-
+-      if (curr == &priv->bss_list)
+-              ptr = NULL;
+-      /* otherwise ptr points to the struct bss_info we have chosen */
+-
+-      at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name,
+-               __func__, ptr);
+-      return ptr;
+-}
+-
+-/* Start joining a matching BSS, or create own IBSS */
+-static void at76_work_join(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            work_join);
+-      int ret;
+-      unsigned long flags;
+-
+-      mutex_lock(&priv->mtx);
+-
+-      WARN_ON(priv->mac_state != MAC_JOINING);
+-      if (priv->mac_state != MAC_JOINING)
+-              goto exit;
+-
+-      /* secure the access to priv->curr_bss ! */
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-      priv->curr_bss = at76_match_bss(priv, priv->curr_bss);
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
+-
+-      if (!priv->curr_bss) {
+-              /* here we haven't found a matching (i)bss ... */
+-              if (priv->iw_mode == IW_MODE_ADHOC) {
+-                      at76_set_mac_state(priv, MAC_OWN_IBSS);
+-                      at76_start_ibss(priv);
+-                      goto exit;
+-              }
+-              /* haven't found a matching BSS in infra mode - try again */
+-              at76_set_mac_state(priv, MAC_SCANNING);
+-              schedule_work(&priv->work_start_scan);
+-              goto exit;
+-      }
+-
+-      ret = at76_join_bss(priv, priv->curr_bss);
+-      if (ret < 0) {
+-              printk(KERN_ERR "%s: join_bss failed with %d\n",
+-                     priv->netdev->name, ret);
+-              goto exit;
+-      }
+-
+-      ret = at76_wait_completion(priv, CMD_JOIN);
+-      if (ret != CMD_STATUS_COMPLETE) {
+-              if (ret != CMD_STATUS_TIME_OUT)
+-                      printk(KERN_ERR "%s: join_bss completed with %d\n",
+-                             priv->netdev->name, ret);
+-              else
+-                      printk(KERN_INFO "%s: join_bss ssid %s timed out\n",
+-                             priv->netdev->name,
+-                             mac2str(priv->curr_bss->bssid));
+-
+-              /* retry next BSS immediately */
+-              schedule_work(&priv->work_join);
+-              goto exit;
+-      }
+-
+-      /* here we have joined the (I)BSS */
+-      if (priv->iw_mode == IW_MODE_ADHOC) {
+-              struct bss_info *bptr = priv->curr_bss;
+-              at76_set_mac_state(priv, MAC_CONNECTED);
+-              /* get ESSID, BSSID and channel for priv->curr_bss */
+-              priv->essid_size = bptr->ssid_len;
+-              memcpy(priv->essid, bptr->ssid, bptr->ssid_len);
+-              memcpy(priv->bssid, bptr->bssid, ETH_ALEN);
+-              priv->channel = bptr->channel;
+-              at76_iwevent_bss_connect(priv->netdev, bptr->bssid);
+-              netif_carrier_on(priv->netdev);
+-              netif_start_queue(priv->netdev);
+-              /* just to be sure */
+-              cancel_delayed_work(&priv->dwork_get_scan);
+-              cancel_delayed_work(&priv->dwork_auth);
+-              cancel_delayed_work(&priv->dwork_assoc);
+-      } else {
+-              /* send auth req */
+-              priv->retries = AUTH_RETRIES;
+-              at76_set_mac_state(priv, MAC_AUTH);
+-              at76_auth_req(priv, priv->curr_bss, 1, NULL);
+-              at76_dbg(DBG_MGMT_TIMER,
+-                       "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
+-              schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
+-      }
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* Reap scan results */
+-static void at76_dwork_get_scan(struct work_struct *work)
+-{
+-      int status;
+-      int ret;
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            dwork_get_scan.work);
+-
+-      mutex_lock(&priv->mtx);
+-      WARN_ON(priv->mac_state != MAC_SCANNING);
+-      if (priv->mac_state != MAC_SCANNING)
+-              goto exit;
+-
+-      status = at76_get_cmd_status(priv->udev, CMD_SCAN);
+-      if (status < 0) {
+-              printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n",
+-                     priv->netdev->name, __func__, status);
+-              status = CMD_STATUS_IN_PROGRESS;
+-              /* INFO: Hope it was a one off error - if not, scanning
+-                 further down the line and stop this cycle */
+-      }
+-      at76_dbg(DBG_PROGRESS,
+-               "%s %s: got cmd_status %d (state %s, need_any %d)",
+-               priv->netdev->name, __func__, status,
+-               mac_states[priv->mac_state], priv->scan_need_any);
+-
+-      if (status != CMD_STATUS_COMPLETE) {
+-              if ((status != CMD_STATUS_IN_PROGRESS) &&
+-                  (status != CMD_STATUS_IDLE))
+-                      printk(KERN_ERR "%s: %s: Bad scan status: %s\n",
+-                             priv->netdev->name, __func__,
+-                             at76_get_cmd_status_string(status));
+-
+-              /* the first cmd status after scan start is always a IDLE ->
+-                 start the timer to poll again until COMPLETED */
+-              at76_dbg(DBG_MGMT_TIMER,
+-                       "%s:%d: starting mgmt_timer for %d ticks",
+-                       __func__, __LINE__, SCAN_POLL_INTERVAL);
+-              schedule_delayed_work(&priv->dwork_get_scan,
+-                                    SCAN_POLL_INTERVAL);
+-              goto exit;
+-      }
+-
+-      if (at76_debug & DBG_BSS_TABLE)
+-              at76_dump_bss_table(priv);
+-
+-      if (priv->scan_need_any) {
+-              ret = at76_start_scan(priv, 0);
+-              if (ret < 0)
+-                      printk(KERN_ERR
+-                             "%s: %s: start_scan (ANY) failed with %d\n",
+-                             priv->netdev->name, __func__, ret);
+-              at76_dbg(DBG_MGMT_TIMER,
+-                       "%s:%d: starting mgmt_timer for %d ticks", __func__,
+-                       __LINE__, SCAN_POLL_INTERVAL);
+-              schedule_delayed_work(&priv->dwork_get_scan,
+-                                    SCAN_POLL_INTERVAL);
+-              priv->scan_need_any = 0;
+-      } else {
+-              priv->scan_state = SCAN_COMPLETED;
+-              /* report the end of scan to user space */
+-              at76_iwevent_scan_complete(priv->netdev);
+-              at76_set_mac_state(priv, MAC_JOINING);
+-              schedule_work(&priv->work_join);
+-      }
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* Handle loss of beacons from the AP */
+-static void at76_dwork_beacon(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            dwork_beacon.work);
+-
+-      mutex_lock(&priv->mtx);
+-      if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA)
+-              goto exit;
+-
+-      /* We haven't received any beacons from out AP for BEACON_TIMEOUT */
+-      printk(KERN_INFO "%s: lost beacon bssid %s\n",
+-             priv->netdev->name, mac2str(priv->curr_bss->bssid));
+-
+-      netif_carrier_off(priv->netdev);
+-      netif_stop_queue(priv->netdev);
+-      at76_iwevent_bss_disconnect(priv->netdev);
+-      at76_set_mac_state(priv, MAC_SCANNING);
+-      schedule_work(&priv->work_start_scan);
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* Handle authentication response timeout */
+-static void at76_dwork_auth(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            dwork_auth.work);
+-
+-      mutex_lock(&priv->mtx);
+-      WARN_ON(priv->mac_state != MAC_AUTH);
+-      if (priv->mac_state != MAC_AUTH)
+-              goto exit;
+-
+-      at76_dbg(DBG_PROGRESS, "%s: authentication response timeout",
+-               priv->netdev->name);
+-
+-      if (priv->retries-- >= 0) {
+-              at76_auth_req(priv, priv->curr_bss, 1, NULL);
+-              at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
+-                       __func__, __LINE__);
+-              schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
+-      } else {
+-              /* try to get next matching BSS */
+-              at76_set_mac_state(priv, MAC_JOINING);
+-              schedule_work(&priv->work_join);
+-      }
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* Handle association response timeout */
+-static void at76_dwork_assoc(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            dwork_assoc.work);
+-
+-      mutex_lock(&priv->mtx);
+-      WARN_ON(priv->mac_state != MAC_ASSOC);
+-      if (priv->mac_state != MAC_ASSOC)
+-              goto exit;
+-
+-      at76_dbg(DBG_PROGRESS, "%s: association response timeout",
+-               priv->netdev->name);
+-
+-      if (priv->retries-- >= 0) {
+-              at76_assoc_req(priv, priv->curr_bss);
+-              at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
+-                       __func__, __LINE__);
+-              schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
+-      } else {
+-              /* try to get next matching BSS */
+-              at76_set_mac_state(priv, MAC_JOINING);
+-              schedule_work(&priv->work_join);
+-      }
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
++              dev_printk(KERN_ERR, &udev->dev,
++                         "downloading external firmware failed: %d\n", ret);
++      return ret;
+ }
+-/* Read new bssid in ad-hoc mode */
+-static void at76_work_new_bss(struct work_struct *work)
++/* Download internal firmware */
++static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
+ {
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            work_new_bss);
+       int ret;
+-      struct mib_mac_mgmt mac_mgmt;
++      int need_remap = !at76_is_505a(fwe->board_type);
+-      mutex_lock(&priv->mtx);
++      ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
++                                 need_remap ? 0 : 2 * HZ);
+-      ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt,
+-                         sizeof(struct mib_mac_mgmt));
+       if (ret < 0) {
+-              printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
+-                     priv->netdev->name, ret);
++              dev_printk(KERN_ERR, &udev->dev,
++                         "downloading internal fw failed with %d\n", ret);
+               goto exit;
+       }
+-      at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change);
+-      memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN);
+-      at76_dbg(DBG_PROGRESS, "using BSSID %s", mac2str(priv->bssid));
+-
+-      at76_iwevent_bss_connect(priv->netdev, priv->bssid);
++      at76_dbg(DBG_DEVSTART, "sending REMAP");
+-      priv->mib_buf.type = MIB_MAC_MGMT;
+-      priv->mib_buf.size = 1;
+-      priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
+-      priv->mib_buf.data.byte = 0;
++      /* no REMAP for 505A (see SF driver) */
++      if (need_remap) {
++              ret = at76_remap(udev);
++              if (ret < 0) {
++                      dev_printk(KERN_ERR, &udev->dev,
++                                 "sending REMAP failed with %d\n", ret);
++                      goto exit;
++              }
++      }
+-      ret = at76_set_mib(priv, &priv->mib_buf);
+-      if (ret < 0)
+-              printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
+-                     priv->netdev->name, ret);
++      at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
++      schedule_timeout_interruptible(2 * HZ + 1);
++      usb_reset_device(udev);
+ exit:
+-      mutex_unlock(&priv->mtx);
++      return ret;
+ }
+ static int at76_startup_device(struct at76_priv *priv)
+@@ -3905,14 +1470,14 @@
+       at76_dbg(DBG_PARAMS,
+                "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d "
+-               "keylen %d", priv->netdev->name, priv->essid_size, priv->essid,
+-               hex2str(priv->essid, IW_ESSID_MAX_SIZE),
++               "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
++               priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE),
+                priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
+                priv->channel, priv->wep_enabled ? "enabled" : "disabled",
+                priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
+       at76_dbg(DBG_PARAMS,
+                "%s param: preamble %s rts %d retry %d frag %d "
+-               "txrate %s auth_mode %d", priv->netdev->name,
++               "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
+                preambles[priv->preamble_type], priv->rts_threshold,
+                priv->short_retry_limit, priv->frag_threshold,
+                priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
+@@ -3923,7 +1488,7 @@
+       at76_dbg(DBG_PARAMS,
+                "%s param: pm_mode %d pm_period %d auth_mode %s "
+                "scan_times %d %d scan_mode %s",
+-               priv->netdev->name, priv->pm_mode, priv->pm_period,
++               wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
+                priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
+                priv->scan_min_time, priv->scan_max_time,
+                priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
+@@ -3957,7 +1522,8 @@
+       ccfg->ssid_len = priv->essid_size;
+       ccfg->wep_default_key_id = priv->wep_key_id;
+-      memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN);
++      memcpy(ccfg->wep_default_key_value, priv->wep_keys,
++             sizeof(priv->wep_keys));
+       ccfg->short_preamble = priv->preamble_type;
+       ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
+@@ -3966,7 +1532,7 @@
+                                   sizeof(struct at76_card_config));
+       if (ret < 0) {
+               printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+               return ret;
+       }
+@@ -4012,69 +1578,6 @@
+       return 0;
+ }
+-/* Restart the interface */
+-static void at76_dwork_restart(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            dwork_restart.work);
+-
+-      mutex_lock(&priv->mtx);
+-
+-      netif_carrier_off(priv->netdev);        /* stop netdev watchdog */
+-      netif_stop_queue(priv->netdev); /* stop tx data packets */
+-
+-      at76_startup_device(priv);
+-
+-      if (priv->iw_mode != IW_MODE_MONITOR) {
+-              priv->netdev->type = ARPHRD_ETHER;
+-              at76_set_mac_state(priv, MAC_SCANNING);
+-              schedule_work(&priv->work_start_scan);
+-      } else {
+-              priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP;
+-              at76_start_monitor(priv);
+-      }
+-
+-      mutex_unlock(&priv->mtx);
+-}
+-
+-/* Initiate scanning */
+-static void at76_work_start_scan(struct work_struct *work)
+-{
+-      struct at76_priv *priv = container_of(work, struct at76_priv,
+-                                            work_start_scan);
+-      int ret;
+-
+-      mutex_lock(&priv->mtx);
+-
+-      WARN_ON(priv->mac_state != MAC_SCANNING);
+-      if (priv->mac_state != MAC_SCANNING)
+-              goto exit;
+-
+-      /* only clear the bss list when a scan is actively initiated,
+-       * otherwise simply rely on at76_bss_list_timeout */
+-      if (priv->scan_state == SCAN_IN_PROGRESS) {
+-              at76_free_bss_list(priv);
+-              priv->scan_need_any = 1;
+-      } else
+-              priv->scan_need_any = 0;
+-
+-      ret = at76_start_scan(priv, 1);
+-
+-      if (ret < 0)
+-              printk(KERN_ERR "%s: %s: start_scan failed with %d\n",
+-                     priv->netdev->name, __func__, ret);
+-      else {
+-              at76_dbg(DBG_MGMT_TIMER,
+-                       "%s:%d: starting mgmt_timer for %d ticks",
+-                       __func__, __LINE__, SCAN_POLL_INTERVAL);
+-              schedule_delayed_work(&priv->dwork_get_scan,
+-                                    SCAN_POLL_INTERVAL);
+-      }
+-
+-exit:
+-      mutex_unlock(&priv->mtx);
+-}
+-
+ /* Enable or disable promiscuous mode */
+ static void at76_work_set_promisc(struct work_struct *work)
+ {
+@@ -4092,7 +1595,7 @@
+       ret = at76_set_mib(priv, &priv->mib_buf);
+       if (ret < 0)
+               printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
+-                     priv->netdev->name, ret);
++                     wiphy_name(priv->hw->wiphy), ret);
+       mutex_unlock(&priv->mtx);
+ }
+@@ -4108,1088 +1611,759 @@
+       mutex_unlock(&priv->mtx);
+ }
+-/* We got an association response */
+-static void at76_rx_mgmt_assoc(struct at76_priv *priv,
+-                             struct at76_rx_buffer *buf)
+-{
+-      struct ieee80211_assoc_response *resp =
+-          (struct ieee80211_assoc_response *)buf->packet;
+-      u16 assoc_id = le16_to_cpu(resp->aid);
+-      u16 status = le16_to_cpu(resp->status);
+-
+-      at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %s capa 0x%04x status "
+-               "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name,
+-               mac2str(resp->header.addr3), le16_to_cpu(resp->capability),
+-               status, assoc_id, hex2str(resp->info_element->data,
+-                                         resp->info_element->len));
+-
+-      if (priv->mac_state != MAC_ASSOC) {
+-              printk(KERN_INFO "%s: AssocResp in state %s ignored\n",
+-                     priv->netdev->name, mac_states[priv->mac_state]);
++static void at76_rx_tasklet(unsigned long param)
++{
++      struct urb *urb = (struct urb *)param;
++      struct at76_priv *priv = urb->context;
++      struct at76_rx_buffer *buf;
++      struct ieee80211_rx_status rx_status = { 0 };
++
++      if (priv->device_unplugged) {
++              at76_dbg(DBG_DEVSTART, "device unplugged");
++              if (urb)
++                      at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
+               return;
+       }
+-      BUG_ON(!priv->curr_bss);
++      if (!priv->rx_skb || !priv->rx_skb->data)
++              return;
+-      cancel_delayed_work(&priv->dwork_assoc);
+-      if (status == WLAN_STATUS_SUCCESS) {
+-              struct bss_info *ptr = priv->curr_bss;
+-              priv->assoc_id = assoc_id & 0x3fff;
+-              /* update iwconfig params */
+-              memcpy(priv->bssid, ptr->bssid, ETH_ALEN);
+-              memcpy(priv->essid, ptr->ssid, ptr->ssid_len);
+-              priv->essid_size = ptr->ssid_len;
+-              priv->channel = ptr->channel;
+-              schedule_work(&priv->work_assoc_done);
+-      } else {
+-              at76_set_mac_state(priv, MAC_JOINING);
+-              schedule_work(&priv->work_join);
++      buf = (struct at76_rx_buffer *)priv->rx_skb->data;
++
++      if (urb->status != 0) {
++              if (urb->status != -ENOENT && urb->status != -ECONNRESET)
++                      at76_dbg(DBG_URB,
++                               "%s %s: - nonzero Rx bulk status received: %d",
++                               __func__, wiphy_name(priv->hw->wiphy),
++                               urb->status);
++              return;
+       }
++
++      at76_dbg(DBG_RX_ATMEL_HDR,
++               "%s: rx frame: rate %d rssi %d noise %d link %d",
++               wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
++               buf->noise_level, buf->link_quality);
++
++      skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN);
++      at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN],
++                    priv->rx_skb->len, "RX: len=%d",
++                    (int)(priv->rx_skb->len - AT76_RX_HDRLEN));
++
++      rx_status.signal = buf->rssi;
++      /* FIXME: is rate_idx still present in structure? */
++      rx_status.rate_idx = buf->rx_rate;
++      rx_status.flag |= RX_FLAG_DECRYPTED;
++      rx_status.flag |= RX_FLAG_IV_STRIPPED;
++
++      skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
++      at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
++               priv->rx_skb->len, priv->rx_skb->data_len);
++      ieee80211_rx_irqsafe(priv->hw, priv->rx_skb, &rx_status);
++
++      /* Use a new skb for the next receive */
++      priv->rx_skb = NULL;
++
++      at76_submit_rx_urb(priv);
+ }
+-/* Process disassociation request from the AP */
+-static void at76_rx_mgmt_disassoc(struct at76_priv *priv,
+-                                struct at76_rx_buffer *buf)
++/* Load firmware into kernel memory and parse it */
++static struct fwentry *at76_load_firmware(struct usb_device *udev,
++                                        enum board_type board_type)
+ {
+-      struct ieee80211_disassoc *resp =
+-          (struct ieee80211_disassoc *)buf->packet;
+-      struct ieee80211_hdr_3addr *mgmt = &resp->header;
++      int ret;
++      char *str;
++      struct at76_fw_header *fwh;
++      struct fwentry *fwe = &firmwares[board_type];
+-      at76_dbg(DBG_RX_MGMT,
+-               "%s: rx DisAssoc bssid %s reason 0x%04x destination %s",
+-               priv->netdev->name, mac2str(mgmt->addr3),
+-               le16_to_cpu(resp->reason), mac2str(mgmt->addr1));
++      mutex_lock(&fw_mutex);
+-      /* We are not connected, ignore */
+-      if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT
+-          || !priv->curr_bss)
+-              return;
++      if (fwe->loaded) {
++              at76_dbg(DBG_FW, "re-using previously loaded fw");
++              goto exit;
++      }
+-      /* Not our BSSID, ignore */
+-      if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
+-              return;
++      at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
++      ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
++      if (ret < 0) {
++              dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
++                         fwe->fwname);
++              dev_printk(KERN_ERR, &udev->dev,
++                         "you may need to download the firmware from "
++                         "http://developer.berlios.de/projects/at76c503a/\n");
++              goto exit;
++      }
+-      /* Not for our STA and not broadcast, ignore */
+-      if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
+-          && !is_broadcast_ether_addr(mgmt->addr1))
+-              return;
++      at76_dbg(DBG_FW, "got it.");
++      fwh = (struct at76_fw_header *)(fwe->fw->data);
+-      if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED
+-          && priv->mac_state != MAC_JOINING) {
+-              printk(KERN_INFO "%s: DisAssoc in state %s ignored\n",
+-                     priv->netdev->name, mac_states[priv->mac_state]);
+-              return;
++      if (fwe->fw->size <= sizeof(*fwh)) {
++              dev_printk(KERN_ERR, &udev->dev,
++                         "firmware is too short (0x%zx)\n", fwe->fw->size);
++              goto exit;
+       }
+-      if (priv->mac_state == MAC_CONNECTED) {
+-              netif_carrier_off(priv->netdev);
+-              netif_stop_queue(priv->netdev);
+-              at76_iwevent_bss_disconnect(priv->netdev);
+-      }
+-      cancel_delayed_work(&priv->dwork_get_scan);
+-      cancel_delayed_work(&priv->dwork_beacon);
+-      cancel_delayed_work(&priv->dwork_auth);
+-      cancel_delayed_work(&priv->dwork_assoc);
+-      at76_set_mac_state(priv, MAC_JOINING);
+-      schedule_work(&priv->work_join);
+-}
+-
+-static void at76_rx_mgmt_auth(struct at76_priv *priv,
+-                            struct at76_rx_buffer *buf)
+-{
+-      struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet;
+-      struct ieee80211_hdr_3addr *mgmt = &resp->header;
+-      int seq_nr = le16_to_cpu(resp->transaction);
+-      int alg = le16_to_cpu(resp->algorithm);
+-      int status = le16_to_cpu(resp->status);
+-
+-      at76_dbg(DBG_RX_MGMT,
+-               "%s: rx AuthFrame bssid %s alg %d seq_nr %d status %d "
+-               "destination %s", priv->netdev->name, mac2str(mgmt->addr3),
+-               alg, seq_nr, status, mac2str(mgmt->addr1));
+-
+-      if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2)
+-              at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...",
+-                       priv->netdev->name, hex2str(resp->info_element, 18));
+-
+-      if (priv->mac_state != MAC_AUTH) {
+-              printk(KERN_INFO "%s: ignored AuthFrame in state %s\n",
+-                     priv->netdev->name, mac_states[priv->mac_state]);
+-              return;
+-      }
+-      if (priv->auth_mode != alg) {
+-              printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n",
+-                     priv->netdev->name, alg);
+-              return;
++      /* CRC currently not checked */
++      fwe->board_type = le32_to_cpu(fwh->board_type);
++      if (fwe->board_type != board_type) {
++              dev_printk(KERN_ERR, &udev->dev,
++                         "board type mismatch, requested %u, got %u\n",
++                         board_type, fwe->board_type);
++              goto exit;
+       }
+-      BUG_ON(!priv->curr_bss);
++      fwe->fw_version.major = fwh->major;
++      fwe->fw_version.minor = fwh->minor;
++      fwe->fw_version.patch = fwh->patch;
++      fwe->fw_version.build = fwh->build;
+-      /* Not our BSSID or not for our STA, ignore */
+-      if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)
+-          || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1))
+-              return;
++      str = (char *)fwh + le32_to_cpu(fwh->str_offset);
++      fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
++      fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
++      fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
++      fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
+-      cancel_delayed_work(&priv->dwork_auth);
+-      if (status != WLAN_STATUS_SUCCESS) {
+-              /* try to join next bss */
+-              at76_set_mac_state(priv, MAC_JOINING);
+-              schedule_work(&priv->work_join);
+-              return;
+-      }
++      fwe->loaded = 1;
+-      if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) {
+-              priv->retries = ASSOC_RETRIES;
+-              at76_set_mac_state(priv, MAC_ASSOC);
+-              at76_assoc_req(priv, priv->curr_bss);
+-              at76_dbg(DBG_MGMT_TIMER,
+-                       "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
+-              schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
+-              return;
+-      }
++      dev_printk(KERN_DEBUG, &udev->dev,
++                 "using firmware %s (version %d.%d.%d-%d)\n",
++                 fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
+-      WARN_ON(seq_nr != 2);
+-      at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element);
+-      at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__,
+-               __LINE__);
+-      schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
+-}
+-
+-static void at76_rx_mgmt_deauth(struct at76_priv *priv,
+-                              struct at76_rx_buffer *buf)
+-{
+-      struct ieee80211_disassoc *resp =
+-          (struct ieee80211_disassoc *)buf->packet;
+-      struct ieee80211_hdr_3addr *mgmt = &resp->header;
+-
+-      at76_dbg(DBG_RX_MGMT | DBG_PROGRESS,
+-               "%s: rx DeAuth bssid %s reason 0x%04x destination %s",
+-               priv->netdev->name, mac2str(mgmt->addr3),
+-               le16_to_cpu(resp->reason), mac2str(mgmt->addr1));
+-
+-      if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC
+-          && priv->mac_state != MAC_CONNECTED) {
+-              printk(KERN_INFO "%s: DeAuth in state %s ignored\n",
+-                     priv->netdev->name, mac_states[priv->mac_state]);
+-              return;
+-      }
++      at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
++               le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
++               le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
++      at76_dbg(DBG_DEVSTART, "firmware id %s", str);
+-      BUG_ON(!priv->curr_bss);
++exit:
++      mutex_unlock(&fw_mutex);
+-      /* Not our BSSID, ignore */
+-      if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
+-              return;
++      if (fwe->loaded)
++              return fwe;
++      else
++              return NULL;
++}
+-      /* Not for our STA and not broadcast, ignore */
+-      if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
+-          && !is_broadcast_ether_addr(mgmt->addr1))
+-              return;
++static void at76_mac80211_tx_callback(struct urb *urb)
++{
++      struct at76_priv *priv = urb->context;
++      struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
+-      if (priv->mac_state == MAC_CONNECTED)
+-              at76_iwevent_bss_disconnect(priv->netdev);
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
+-      at76_set_mac_state(priv, MAC_JOINING);
+-      schedule_work(&priv->work_join);
+-      cancel_delayed_work(&priv->dwork_get_scan);
+-      cancel_delayed_work(&priv->dwork_beacon);
+-      cancel_delayed_work(&priv->dwork_auth);
+-      cancel_delayed_work(&priv->dwork_assoc);
+-}
+-
+-static void at76_rx_mgmt_beacon(struct at76_priv *priv,
+-                              struct at76_rx_buffer *buf)
+-{
+-      int varpar_len;
+-      /* beacon content */
+-      struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet;
+-      struct ieee80211_hdr_3addr *mgmt = &bdata->header;
+-
+-      struct list_head *lptr;
+-      struct bss_info *match; /* entry matching addr3 with its bssid */
+-      int new_entry = 0;
+-      int len;
+-      struct ieee80211_info_element *ie;
+-      int have_ssid = 0;
+-      int have_rates = 0;
+-      int have_channel = 0;
+-      int keep_going = 1;
+-      unsigned long flags;
+-
+-      spin_lock_irqsave(&priv->bss_list_spinlock, flags);
+-      if (priv->mac_state == MAC_CONNECTED) {
+-              /* in state MAC_CONNECTED we use the mgmt_timer to control
+-                 the beacon of the BSS */
+-              BUG_ON(!priv->curr_bss);
+-
+-              if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) {
+-                      /* We got our AP's beacon, defer the timeout handler.
+-                         Kill pending work first, as schedule_delayed_work()
+-                         won't do it. */
+-                      cancel_delayed_work(&priv->dwork_beacon);
+-                      schedule_delayed_work(&priv->dwork_beacon,
+-                                            BEACON_TIMEOUT);
+-                      priv->curr_bss->rssi = buf->rssi;
+-                      priv->beacons_received++;
+-                      goto exit;
+-              }
++      switch (urb->status) {
++      case 0:
++              /* success */
++              /* FIXME:
++               * is the frame really ACKed when tx_callback is called ? */
++              info->flags |= IEEE80211_TX_STAT_ACK;
++              break;
++      case -ENOENT:
++      case -ECONNRESET:
++              /* fail, urb has been unlinked */
++              /* FIXME: add error message */
++              break;
++      default:
++              at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
++                       __func__, urb->status);
++              break;
+       }
+-      /* look if we have this BSS already in the list */
+-      match = NULL;
++      memset(&info->status, 0, sizeof(info->status));
+-      if (!list_empty(&priv->bss_list)) {
+-              list_for_each(lptr, &priv->bss_list) {
+-                      struct bss_info *bss_ptr =
+-                          list_entry(lptr, struct bss_info, list);
+-                      if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) {
+-                              match = bss_ptr;
+-                              break;
+-                      }
+-              }
++      ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);
++
++      priv->tx_skb = NULL;
++
++      ieee80211_wake_queues(priv->hw);
++}
++
++static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
++{
++      struct at76_priv *priv = hw->priv;
++      struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
++      struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++      int padding, submit_len, ret;
++
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
++
++      if (priv->tx_urb->status == -EINPROGRESS) {
++              printk(KERN_ERR "%s: %s called while tx urb is pending\n",
++                     wiphy_name(priv->hw->wiphy), __func__);
++              return NETDEV_TX_BUSY;
+       }
+-      if (!match) {
+-              /* BSS not in the list - append it */
+-              match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC);
+-              if (!match) {
+-                      at76_dbg(DBG_BSS_TABLE,
+-                               "%s: cannot kmalloc new bss info (%zd byte)",
+-                               priv->netdev->name, sizeof(struct bss_info));
+-                      goto exit;
+-              }
+-              new_entry = 1;
+-              list_add_tail(&match->list, &priv->bss_list);
++      ieee80211_stop_queues(hw);
++
++      at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */
++
++      WARN_ON(priv->tx_skb != NULL);
++
++      priv->tx_skb = skb;
++      padding = at76_calc_padding(skb->len);
++      submit_len = AT76_TX_HDRLEN + skb->len + padding;
++
++      /* setup 'Atmel' header */
++      memset(tx_buffer, 0, sizeof(*tx_buffer));
++      tx_buffer->padding = padding;
++      tx_buffer->wlength = cpu_to_le16(skb->len);
++      tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
++      if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) {
++              tx_buffer->key_id = (info->control.hw_key->keyidx);
++              tx_buffer->cipher_type =
++                      priv->keys[info->control.hw_key->keyidx].cipher;
++              tx_buffer->cipher_length =
++                      priv->keys[info->control.hw_key->keyidx].keylen;
++              tx_buffer->reserved = 0;
++      } else {
++              tx_buffer->key_id = 0;
++              tx_buffer->cipher_type = 0;
++              tx_buffer->cipher_length = 0;
++              tx_buffer->reserved = 0;
++      };
++      /* memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); */
++      memcpy(tx_buffer->packet, skb->data, skb->len);
++
++      at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
++               wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
++               tx_buffer->padding, tx_buffer->tx_rate);
++
++      /* send stuff */
++      at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
++                    "%s(): tx_buffer %d bytes:", __func__, submit_len);
++      usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
++                        submit_len, at76_mac80211_tx_callback, priv);
++      ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
++      if (ret) {
++              printk(KERN_ERR "%s: error in tx submit urb: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
++              if (ret == -EINVAL)
++                      printk(KERN_ERR
++                             "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
++                             wiphy_name(priv->hw->wiphy), priv->tx_urb,
++                             priv->tx_urb->hcpriv, priv->tx_urb->complete);
+       }
+-      match->capa = le16_to_cpu(bdata->capability);
+-      match->beacon_interval = le16_to_cpu(bdata->beacon_interval);
+-      match->rssi = buf->rssi;
+-      match->link_qual = buf->link_quality;
+-      match->noise_level = buf->noise_level;
+-      memcpy(match->bssid, mgmt->addr3, ETH_ALEN);
+-      at76_dbg(DBG_RX_BEACON, "%s: bssid %s", priv->netdev->name,
+-               mac2str(match->bssid));
+-
+-      ie = bdata->info_element;
+-
+-      /* length of var length beacon parameters */
+-      varpar_len = min_t(int, le16_to_cpu(buf->wlength) -
+-                         sizeof(struct ieee80211_beacon),
+-                         BEACON_MAX_DATA_LENGTH);
+-
+-      /* This routine steps through the bdata->data array to get
+-       * some useful information about the access point.
+-       * Currently, this implementation supports receipt of: SSID,
+-       * supported transfer rates and channel, in any order, with some
+-       * tolerance for intermittent unknown codes (although this
+-       * functionality may not be necessary as the useful information will
+-       * usually arrive in consecutively, but there have been some
+-       * reports of some of the useful information fields arriving in a
+-       * different order).
+-       * It does not support any more IE types although MFIE_TYPE_TIM may
+-       * be supported (on my AP at least).
+-       * The bdata->data array is about 1500 bytes long but only ~36 of those
+-       * bytes are useful, hence the have_ssid etc optimizations. */
+-
+-      while (keep_going &&
+-             ((&ie->data[ie->len] - (u8 *)bdata->info_element) <=
+-              varpar_len)) {
++      return 0;
++}
+-              switch (ie->id) {
++static int at76_mac80211_start(struct ieee80211_hw *hw)
++{
++      struct at76_priv *priv = hw->priv;
++      int ret;
+-              case MFIE_TYPE_SSID:
+-                      if (have_ssid)
+-                              break;
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
+-                      len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
++      mutex_lock(&priv->mtx);
+-                      /* we copy only if this is a new entry,
+-                         or the incoming SSID is not a hidden SSID. This
+-                         will protect us from overwriting a real SSID read
+-                         in a ProbeResponse with a hidden one from a
+-                         following beacon. */
+-                      if (!new_entry && at76_is_hidden_ssid(ie->data, len)) {
+-                              have_ssid = 1;
+-                              break;
+-                      }
++      ret = at76_submit_rx_urb(priv);
++      if (ret < 0) {
++              printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
++              goto error;
++      }
+-                      match->ssid_len = len;
+-                      memcpy(match->ssid, ie->data, len);
+-                      at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s",
+-                               priv->netdev->name, len, match->ssid);
+-                      have_ssid = 1;
+-                      break;
++      at76_startup_device(priv);
+-              case MFIE_TYPE_RATES:
+-                      if (have_rates)
+-                              break;
++      at76_start_monitor(priv);
+-                      match->rates_len =
+-                          min_t(int, sizeof(match->rates), ie->len);
+-                      memcpy(match->rates, ie->data, match->rates_len);
+-                      have_rates = 1;
+-                      at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s",
+-                               priv->netdev->name,
+-                               hex2str(ie->data, ie->len));
+-                      break;
++error:
++      mutex_unlock(&priv->mtx);
+-              case MFIE_TYPE_DS_SET:
+-                      if (have_channel)
+-                              break;
++      return 0;
++}
+-                      match->channel = ie->data[0];
+-                      have_channel = 1;
+-                      at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d",
+-                               priv->netdev->name, match->channel);
+-                      break;
++static void at76_mac80211_stop(struct ieee80211_hw *hw)
++{
++      struct at76_priv *priv = hw->priv;
+-              case MFIE_TYPE_CF_SET:
+-              case MFIE_TYPE_TIM:
+-              case MFIE_TYPE_IBSS_SET:
+-              default:
+-                      at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s",
+-                               priv->netdev->name, ie->id, ie->len,
+-                               hex2str(ie->data, ie->len));
+-                      break;
+-              }
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
+-              /* advance to the next informational element */
+-              next_ie(&ie);
++      mutex_lock(&priv->mtx);
++
++      if (!priv->device_unplugged) {
++              /* We are called by "ifconfig ethX down", not because the
++               * device is not available anymore. */
++              if (at76_set_radio(priv, 0) == 1)
++                      at76_wait_completion(priv, CMD_RADIO_ON);
++
++              /* We unlink rx_urb because at76_open() re-submits it.
++               * If unplugged, at76_delete_device() takes care of it. */
++              usb_kill_urb(priv->rx_urb);
++      }
++
++      mutex_unlock(&priv->mtx);
++}
++
++static int at76_add_interface(struct ieee80211_hw *hw,
++                            struct ieee80211_if_init_conf *conf)
++{
++      struct at76_priv *priv = hw->priv;
++      int ret = 0;
+-              /* Optimization: after all, the bdata->data array is
+-               * varpar_len bytes long, whereas we get all of the useful
+-               * information after only ~36 bytes, this saves us a lot of
+-               * time (and trouble as the remaining portion of the array
+-               * could be full of junk)
+-               * Comment this out if you want to see what other information
+-               * comes from the AP - although little of it may be useful */
+-      }
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
+-      at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data",
+-               priv->netdev->name);
++      mutex_lock(&priv->mtx);
+-      match->last_rx = jiffies;       /* record last rx of beacon */
++      switch (conf->type) {
++      case NL80211_IFTYPE_STATION:
++              priv->iw_mode = IW_MODE_INFRA;
++              break;
++      default:
++              ret = -EOPNOTSUPP;
++              goto exit;
++      }
+ exit:
+-      spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
++      mutex_unlock(&priv->mtx);
++
++      return ret;
+ }
+-/* Calculate the link level from a given rx_buffer */
+-static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf,
+-                          struct iw_quality *qual)
++static void at76_remove_interface(struct ieee80211_hw *hw,
++                                struct ieee80211_if_init_conf *conf)
+ {
+-      /* just a guess for now, might be different for other chips */
+-      int max_rssi = 42;
+-
+-      qual->level = (buf->rssi * 100 / max_rssi);
+-      if (qual->level > 100)
+-              qual->level = 100;
+-      qual->updated |= IW_QUAL_LEVEL_UPDATED;
++      at76_dbg(DBG_MAC80211, "%s()", __func__);
+ }
+-/* Calculate the link quality from a given rx_buffer */
+-static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf,
+-                         struct iw_quality *qual)
++static int at76_join(struct at76_priv *priv)
+ {
+-      if (at76_is_intersil(priv->board_type))
+-              qual->qual = buf->link_quality;
+-      else {
+-              unsigned long elapsed;
++      struct at76_req_join join;
++      int ret;
+-              /* Update qual at most once a second */
+-              elapsed = jiffies - priv->beacons_last_qual;
+-              if (elapsed < 1 * HZ)
+-                      return;
++      memset(&join, 0, sizeof(struct at76_req_join));
++      memcpy(join.essid, priv->essid, priv->essid_size);
++      join.essid_size = priv->essid_size;
++      memcpy(join.bssid, priv->bssid, ETH_ALEN);
++      join.bss_type = INFRASTRUCTURE_MODE;
++      join.channel = priv->channel;
++      join.timeout = cpu_to_le16(2000);
+-              qual->qual = qual->level * priv->beacons_received *
+-                  msecs_to_jiffies(priv->beacon_period) / elapsed;
++      at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
++      ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
++                                  sizeof(struct at76_req_join));
+-              priv->beacons_last_qual = jiffies;
+-              priv->beacons_received = 0;
++      if (ret < 0) {
++              printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
++              return 0;
+       }
+-      qual->qual = (qual->qual > 100) ? 100 : qual->qual;
+-      qual->updated |= IW_QUAL_QUAL_UPDATED;
+-}
+-/* Calculate the noise quality from a given rx_buffer */
+-static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf,
+-                          struct iw_quality *qual)
+-{
+-      qual->noise = 0;
+-      qual->updated |= IW_QUAL_NOISE_INVALID;
+-}
++      ret = at76_wait_completion(priv, CMD_JOIN);
++      at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
++      if (ret != CMD_STATUS_COMPLETE) {
++              printk(KERN_ERR "%s: at76_wait_completion failed: %d\n",
++                     wiphy_name(priv->hw->wiphy), ret);
++              return 0;
++      }
+-static void at76_update_wstats(struct at76_priv *priv,
+-                             struct at76_rx_buffer *buf)
+-{
+-      struct iw_quality *qual = &priv->wstats.qual;
++      at76_set_tkip_bssid(priv, priv->bssid);
++      at76_set_pm_mode(priv);
+-      if (buf->rssi && priv->mac_state == MAC_CONNECTED) {
+-              qual->updated = 0;
+-              at76_calc_level(priv, buf, qual);
+-              at76_calc_qual(priv, buf, qual);
+-              at76_calc_noise(priv, buf, qual);
+-      } else {
+-              qual->qual = 0;
+-              qual->level = 0;
+-              qual->noise = 0;
+-              qual->updated = IW_QUAL_ALL_INVALID;
+-      }
++      return 0;
+ }
+-static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf)
+-{
+-      struct ieee80211_hdr_3addr *mgmt =
+-          (struct ieee80211_hdr_3addr *)buf->packet;
+-      u16 framectl = le16_to_cpu(mgmt->frame_ctl);
+-
+-      /* update wstats */
+-      if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) {
+-              /* jal: this is a dirty hack needed by Tim in ad-hoc mode */
+-              /* Data packets always seem to have a 0 link level, so we
+-                 only read link quality info from management packets.
+-                 Atmel driver actually averages the present, and previous
+-                 values, we just present the raw value at the moment - TJS */
+-              if (priv->iw_mode == IW_MODE_ADHOC
+-                  || (priv->curr_bss
+-                      && !compare_ether_addr(mgmt->addr3,
+-                                             priv->curr_bss->bssid)))
+-                      at76_update_wstats(priv, buf);
+-      }
+-
+-      at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s",
+-               priv->netdev->name, framectl,
+-               hex2str(mgmt, le16_to_cpu(buf->wlength)));
+-
+-      switch (framectl & IEEE80211_FCTL_STYPE) {
+-      case IEEE80211_STYPE_BEACON:
+-      case IEEE80211_STYPE_PROBE_RESP:
+-              at76_rx_mgmt_beacon(priv, buf);
+-              break;
++static void at76_dwork_hw_scan(struct work_struct *work)
++{
++      struct at76_priv *priv = container_of(work, struct at76_priv,
++                                            dwork_hw_scan.work);
++      int ret;
+-      case IEEE80211_STYPE_ASSOC_RESP:
+-              at76_rx_mgmt_assoc(priv, buf);
+-              break;
++      ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
++      at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);
+-      case IEEE80211_STYPE_DISASSOC:
+-              at76_rx_mgmt_disassoc(priv, buf);
+-              break;
++      /* FIXME: add maximum time for scan to complete */
+-      case IEEE80211_STYPE_AUTH:
+-              at76_rx_mgmt_auth(priv, buf);
+-              break;
++      if (ret != CMD_STATUS_COMPLETE) {
++              queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
++                                 SCAN_POLL_INTERVAL);
++              goto exit;
++      }
+-      case IEEE80211_STYPE_DEAUTH:
+-              at76_rx_mgmt_deauth(priv, buf);
+-              break;
++      ieee80211_scan_completed(priv->hw);
+-      default:
+-              printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
+-                     priv->netdev->name, framectl);
++      if (is_valid_ether_addr(priv->bssid)) {
++              ieee80211_wake_queues(priv->hw);
++              at76_join(priv);
+       }
++      ieee80211_wake_queues(priv->hw);
++
++exit:
+       return;
+ }
+-/* Convert the 802.11 header into an ethernet-style header, make skb
+- * ready for consumption by netif_rx() */
+-static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode)
+-{
+-      struct ieee80211_hdr_3addr *i802_11_hdr;
+-      struct ethhdr *eth_hdr_p;
+-      u8 *src_addr;
+-      u8 *dest_addr;
+-
+-      i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
+-
+-      /* That would be the ethernet header if the hardware converted
+-       * the frame for us.  Make sure the source and the destination
+-       * match the 802.11 header.  Which hardware does it? */
+-      eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN);
+-
+-      dest_addr = i802_11_hdr->addr1;
+-      if (iw_mode == IW_MODE_ADHOC)
+-              src_addr = i802_11_hdr->addr2;
+-      else
+-              src_addr = i802_11_hdr->addr3;
+-
+-      if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) &&
+-          !compare_ether_addr(eth_hdr_p->h_dest, dest_addr))
+-              /* Yes, we already have an ethernet header */
+-              skb_reset_mac_header(skb);
+-      else {
+-              u16 len;
+-
+-              /* Need to build an ethernet header */
+-              if (!memcmp(skb->data, snapsig, sizeof(snapsig))) {
+-                      /* SNAP frame - decapsulate, keep proto */
+-                      skb_push(skb, offsetof(struct ethhdr, h_proto) -
+-                               sizeof(rfc1042sig));
+-                      len = 0;
+-              } else {
+-                      /* 802.3 frame, proto is length */
+-                      len = skb->len;
+-                      skb_push(skb, ETH_HLEN);
+-              }
+-
+-              skb_reset_mac_header(skb);
+-              eth_hdr_p = eth_hdr(skb);
+-              /* This needs to be done in this order (eth_hdr_p->h_dest may
+-               * overlap src_addr) */
+-              memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN);
+-              memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN);
+-              if (len)
+-                      eth_hdr_p->h_proto = htons(len);
+-      }
+-
+-      skb->protocol = eth_type_trans(skb, skb->dev);
+-}
+-
+-/* Check for fragmented data in priv->rx_skb. If the packet was no fragment
+-   or it was the last of a fragment set a skb containing the whole packet
+-   is returned for further processing. Otherwise we get NULL and are
+-   done and the packet is either stored inside the fragment buffer
+-   or thrown away.  Every returned skb starts with the ieee802_11 header
+-   and contains _no_ FCS at the end */
+-static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv)
++static int at76_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
+ {
+-      struct sk_buff *skb = priv->rx_skb;
+-      struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
+-      struct ieee80211_hdr_3addr *i802_11_hdr =
+-          (struct ieee80211_hdr_3addr *)buf->packet;
+-      /* seq_ctrl, fragment_number, sequence number of new packet */
+-      u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl);
+-      u16 fragnr = sctl & 0xf;
+-      u16 seqnr = sctl >> 4;
+-      u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
+-
+-      /* Length including the IEEE802.11 header, but without the trailing
+-       * FCS and without the Atmel Rx header */
+-      int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN;
+-
+-      /* where does the data payload start in skb->data ? */
+-      u8 *data = i802_11_hdr->payload;
+-
+-      /* length of payload, excl. the trailing FCS */
+-      int data_len = length - IEEE80211_3ADDR_LEN;
+-
+-      int i;
+-      struct rx_data_buf *bptr, *optr;
+-      unsigned long oldest = ~0UL;
+-
+-      at76_dbg(DBG_RX_FRAGS,
+-               "%s: rx data frame_ctl %04x addr2 %s seq/frag %d/%d "
+-               "length %d data %d: %s ...", priv->netdev->name, frame_ctl,
+-               mac2str(i802_11_hdr->addr2), seqnr, fragnr, length, data_len,
+-               hex2str(data, 32));
+-
+-      at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p "
+-               "tail %p end %p len %d", priv->netdev->name, skb->head,
+-               skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
+-               skb->len);
+-
+-      if (data_len < 0) {
+-              /* make sure data starts in the buffer */
+-              printk(KERN_INFO "%s: data frame too short\n",
+-                     priv->netdev->name);
+-              return NULL;
+-      }
+-
+-      WARN_ON(length <= AT76_RX_HDRLEN);
+-      if (length <= AT76_RX_HDRLEN)
+-              return NULL;
++      struct at76_priv *priv = hw->priv;
++      struct at76_req_scan scan;
++      int ret;
+-      /* remove the at76_rx_buffer header - we don't need it anymore */
+-      /* we need the IEEE802.11 header (for the addresses) if this packet
+-         is the first of a chain */
+-      skb_pull(skb, AT76_RX_HDRLEN);
+-
+-      /* remove FCS at end */
+-      skb_trim(skb, length);
+-
+-      at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p "
+-               "end %p len %d data %p data_len %d", priv->netdev->name,
+-               skb->head, skb->data, skb_tail_pointer(skb),
+-               skb_end_pointer(skb), skb->len, data, data_len);
+-
+-      if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) {
+-              /* unfragmented packet received */
+-              /* Use a new skb for the next receive */
+-              priv->rx_skb = NULL;
+-              at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name);
+-              return skb;
+-      }
+-
+-      /* look if we've got a chain for the sender address.
+-         afterwards optr points to first free or the oldest entry,
+-         or, if i < NR_RX_DATA_BUF, bptr points to the entry for the
+-         sender address */
+-      /* determining the oldest entry doesn't cope with jiffies wrapping
+-         but I don't care to delete a young entry at these rare moments ... */
+-
+-      bptr = priv->rx_data;
+-      optr = NULL;
+-      for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) {
+-              if (!bptr->skb) {
+-                      optr = bptr;
+-                      oldest = 0UL;
+-                      continue;
+-              }
++      at76_dbg(DBG_MAC80211, "%s():", __func__);
++      at76_dbg_dump(DBG_MAC80211, ssid, len, "ssid %zd bytes:", len);
+-              if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender))
+-                      break;
++      mutex_lock(&priv->mtx);
+-              if (!optr) {
+-                      optr = bptr;
+-                      oldest = bptr->last_rx;
+-              } else if (bptr->last_rx < oldest)
+-                      optr = bptr;
+-      }
+-
+-      if (i < NR_RX_DATA_BUF) {
+-
+-              at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) "
+-                       "matched sender addr",
+-                       priv->netdev->name, i, bptr->seqnr, bptr->fragnr);
+-
+-              /* bptr points to an entry for the sender address */
+-              if (bptr->seqnr == seqnr) {
+-                      int left;
+-                      /* the fragment has the current sequence number */
+-                      if (((bptr->fragnr + 1) & 0xf) != fragnr) {
+-                              /* wrong fragment number -> ignore it */
+-                              /* is & 0xf necessary above ??? */
+-                              at76_dbg(DBG_RX_FRAGS,
+-                                       "%s: frag nr mismatch: %d + 1 != %d",
+-                                       priv->netdev->name, bptr->fragnr,
+-                                       fragnr);
+-                              return NULL;
+-                      }
+-                      bptr->last_rx = jiffies;
+-                      /* the next following fragment number ->
+-                         add the data at the end */
+-
+-                      /* for test only ??? */
+-                      left = skb_tailroom(bptr->skb);
+-                      if (left < data_len)
+-                              printk(KERN_INFO
+-                                     "%s: only %d byte free (need %d)\n",
+-                                     priv->netdev->name, left, data_len);
+-                      else
+-                              memcpy(skb_put(bptr->skb, data_len), data,
+-                                     data_len);
+-
+-                      bptr->fragnr = fragnr;
+-                      if (frame_ctl & IEEE80211_FCTL_MOREFRAGS)
+-                              return NULL;
+-
+-                      /* this was the last fragment - send it */
+-                      skb = bptr->skb;
+-                      bptr->skb = NULL;       /* free the entry */
+-                      at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d",
+-                               priv->netdev->name, seqnr);
+-                      return skb;
+-              }
++      ieee80211_stop_queues(hw);
+-              /* got another sequence number */
+-              if (fragnr == 0) {
+-                      /* it's the start of a new chain - replace the
+-                         old one by this */
+-                      /* bptr->sender has the correct value already */
+-                      at76_dbg(DBG_RX_FRAGS,
+-                               "%s: start of new seq %d, removing old seq %d",
+-                               priv->netdev->name, seqnr, bptr->seqnr);
+-                      bptr->seqnr = seqnr;
+-                      bptr->fragnr = 0;
+-                      bptr->last_rx = jiffies;
+-                      /* swap bptr->skb and priv->rx_skb */
+-                      skb = bptr->skb;
+-                      bptr->skb = priv->rx_skb;
+-                      priv->rx_skb = skb;
+-              } else {
+-                      /* it from the middle of a new chain ->
+-                         delete the old entry and skip the new one */
+-                      at76_dbg(DBG_RX_FRAGS,
+-                               "%s: middle of new seq %d (%d) "
+-                               "removing old seq %d",
+-                               priv->netdev->name, seqnr, fragnr,
+-                               bptr->seqnr);
+-                      dev_kfree_skb(bptr->skb);
+-                      bptr->skb = NULL;
+-              }
+-              return NULL;
++      memset(&scan, 0, sizeof(struct at76_req_scan));
++      memset(scan.bssid, 0xFF, ETH_ALEN);
++      scan.scan_type = SCAN_TYPE_ACTIVE;
++      if (priv->essid_size > 0) {
++              memcpy(scan.essid, ssid, len);
++              scan.essid_size = len;
+       }
++      scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
++      scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
++      scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
++      scan.international_scan = 0;
+-      /* if we didn't find a chain for the sender address, optr
+-         points either to the first free or the oldest entry */
++      at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
++      ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
+-      if (fragnr != 0) {
+-              /* this is not the begin of a fragment chain ... */
+-              at76_dbg(DBG_RX_FRAGS,
+-                       "%s: no chain for non-first fragment (%d)",
+-                       priv->netdev->name, fragnr);
+-              return NULL;
++      if (ret < 0) {
++              err("CMD_SCAN failed: %d", ret);
++              goto exit;
+       }
+-      BUG_ON(!optr);
+-      if (optr->skb) {
+-              /* swap the skb's */
+-              skb = optr->skb;
+-              optr->skb = priv->rx_skb;
+-              priv->rx_skb = skb;
+-
+-              at76_dbg(DBG_RX_FRAGS,
+-                       "%s: free old contents: sender %s seq/frag %d/%d",
+-                       priv->netdev->name, mac2str(optr->sender),
+-                       optr->seqnr, optr->fragnr);
++      queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
++                         SCAN_POLL_INTERVAL);
+-      } else {
+-              /* take the skb from priv->rx_skb */
+-              optr->skb = priv->rx_skb;
+-              /* let at76_submit_rx_urb() allocate a new skb */
+-              priv->rx_skb = NULL;
+-
+-              at76_dbg(DBG_RX_FRAGS, "%s: use a free entry",
+-                       priv->netdev->name);
+-      }
+-      memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN);
+-      optr->seqnr = seqnr;
+-      optr->fragnr = 0;
+-      optr->last_rx = jiffies;
++exit:
++      mutex_unlock(&priv->mtx);
+-      return NULL;
++      return 0;
+ }
+-/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */
+-static void at76_rx_data(struct at76_priv *priv)
++static int at76_config(struct ieee80211_hw *hw, u32 changed)
+ {
+-      struct net_device *netdev = priv->netdev;
+-      struct net_device_stats *stats = &priv->stats;
+-      struct sk_buff *skb = priv->rx_skb;
+-      struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
+-      struct ieee80211_hdr_3addr *i802_11_hdr;
+-      int length = le16_to_cpu(buf->wlength);
+-
+-      at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name,
+-               hex2str(skb->data, AT76_RX_HDRLEN));
++      struct at76_priv *priv = hw->priv;
++      struct ieee80211_conf *conf = &hw->conf;
+-      at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s",
+-               hex2str(skb->data + AT76_RX_HDRLEN, length));
++      at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d",
++               __func__, conf->channel->hw_value, conf->radio_enabled);
++      at76_dbg_dump(DBG_MAC80211, priv->essid, priv->essid_size, "ssid:");
++      at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
+-      skb = at76_check_for_rx_frags(priv);
+-      if (!skb)
+-              return;
++      mutex_lock(&priv->mtx);
+-      /* Atmel header and the FCS are already removed */
+-      i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
++      priv->channel = conf->channel->hw_value;
+-      skb->dev = netdev;
+-      skb->ip_summed = CHECKSUM_NONE; /* TODO: should check CRC */
++      if (is_valid_ether_addr(priv->bssid)) {
++              at76_join(priv);
++              ieee80211_wake_queues(priv->hw);
++      } else {
++              ieee80211_stop_queues(priv->hw);
++              at76_start_monitor(priv);
++      };
+-      if (is_broadcast_ether_addr(i802_11_hdr->addr1)) {
+-              if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast))
+-                      skb->pkt_type = PACKET_BROADCAST;
+-              else
+-                      skb->pkt_type = PACKET_MULTICAST;
+-      } else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr))
+-              skb->pkt_type = PACKET_OTHERHOST;
+-
+-      at76_ieee80211_to_eth(skb, priv->iw_mode);
+-
+-      netdev->last_rx = jiffies;
+-      netif_rx(skb);
+-      stats->rx_packets++;
+-      stats->rx_bytes += length;
++      mutex_unlock(&priv->mtx);
+-      return;
++      return 0;
+ }
+-static void at76_rx_monitor_mode(struct at76_priv *priv)
++static int at76_config_interface(struct ieee80211_hw *hw,
++                               struct ieee80211_vif *vif,
++                               struct ieee80211_if_conf *conf)
+ {
+-      struct at76_rx_radiotap *rt;
+-      u8 *payload;
+-      int skblen;
+-      struct net_device *netdev = priv->netdev;
+-      struct at76_rx_buffer *buf =
+-          (struct at76_rx_buffer *)priv->rx_skb->data;
+-      /* length including the IEEE802.11 header and the trailing FCS,
+-         but not at76_rx_buffer */
+-      int length = le16_to_cpu(buf->wlength);
+-      struct sk_buff *skb = priv->rx_skb;
+-      struct net_device_stats *stats = &priv->stats;
+-
+-      if (length < IEEE80211_FCS_LEN) {
+-              /* buffer contains no data */
+-              at76_dbg(DBG_MONITOR_MODE,
+-                       "%s: MONITOR MODE: rx skb without data",
+-                       priv->netdev->name);
+-              return;
+-      }
+-
+-      skblen = sizeof(struct at76_rx_radiotap) + length;
++      struct at76_priv *priv = hw->priv;
+-      skb = dev_alloc_skb(skblen);
+-      if (!skb) {
+-              printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap "
+-                     "header returned NULL\n", priv->netdev->name);
+-              return;
+-      }
++      at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
+-      skb_put(skb, skblen);
++      mutex_lock(&priv->mtx);
+-      rt = (struct at76_rx_radiotap *)skb->data;
+-      payload = skb->data + sizeof(struct at76_rx_radiotap);
++      memcpy(priv->bssid, conf->bssid, ETH_ALEN);
++//    memcpy(priv->essid, conf->ssid, conf->ssid_len);
++//    priv->essid_size = conf->ssid_len;
++
++      if (is_valid_ether_addr(priv->bssid)) {
++              /* mac80211 is joining a bss */
++              ieee80211_wake_queues(priv->hw);
++              at76_join(priv);
++      } else
++              ieee80211_stop_queues(priv->hw);
+-      rt->rt_hdr.it_version = 0;
+-      rt->rt_hdr.it_pad = 0;
+-      rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap));
+-      rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT);
+-
+-      rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time));
+-      rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80);
+-      rt->rt_signal = buf->rssi;
+-      rt->rt_noise = buf->noise_level;
+-      rt->rt_flags = IEEE80211_RADIOTAP_F_FCS;
+-      if (buf->fragmentation)
+-              rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG;
+-
+-      memcpy(payload, buf->packet, length);
+-      skb->dev = netdev;
+-      skb->ip_summed = CHECKSUM_NONE;
+-      skb_reset_mac_header(skb);
+-      skb->pkt_type = PACKET_OTHERHOST;
+-      skb->protocol = htons(ETH_P_802_2);
+-
+-      netdev->last_rx = jiffies;
+-      netif_rx(skb);
+-      stats->rx_packets++;
+-      stats->rx_bytes += length;
+-}
+-
+-/* Check if we spy on the sender address in buf and update stats */
+-static void at76_iwspy_update(struct at76_priv *priv,
+-                            struct at76_rx_buffer *buf)
+-{
+-      struct ieee80211_hdr_3addr *hdr =
+-          (struct ieee80211_hdr_3addr *)buf->packet;
+-      struct iw_quality qual;
+-
+-      /* We can only set the level here */
+-      qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID;
+-      qual.level = 0;
+-      qual.noise = 0;
+-      at76_calc_level(priv, buf, &qual);
++      mutex_unlock(&priv->mtx);
+-      spin_lock_bh(&priv->spy_spinlock);
++      return 0;
++}
+-      if (priv->spy_data.spy_number > 0)
+-              wireless_spy_update(priv->netdev, hdr->addr2, &qual);
++/* must be atomic */
++static void at76_configure_filter(struct ieee80211_hw *hw,
++                                unsigned int changed_flags,
++                                unsigned int *total_flags, int mc_count,
++                                struct dev_addr_list *mc_list)
++{
++      struct at76_priv *priv = hw->priv;
++      int flags;
++
++      at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
++               "total_flags=0x%08x mc_count=%d",
++               __func__, changed_flags, *total_flags, mc_count);
++
++      flags = changed_flags & AT76_SUPPORTED_FILTERS;
++      *total_flags = AT76_SUPPORTED_FILTERS;
++
++      /* FIXME: access to priv->promisc should be protected with
++       * priv->mtx, but it's impossible because this function needs to be
++       * atomic */
++
++      if (flags && !priv->promisc) {
++              /* mac80211 wants us to enable promiscuous mode */
++              priv->promisc = 1;
++      } else if (!flags && priv->promisc) {
++              /* we need to disable promiscuous mode */
++              priv->promisc = 0;
++      } else
++              return;
+-      spin_unlock_bh(&priv->spy_spinlock);
++      queue_work(hw->workqueue, &priv->work_set_promisc);
+ }
+-static void at76_rx_tasklet(unsigned long param)
++static int at76_set_key_oldfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
++                      const u8 *local_address, const u8 *address,
++                      struct ieee80211_key_conf *key)
+ {
+-      struct urb *urb = (struct urb *)param;
+-      struct at76_priv *priv = urb->context;
+-      struct net_device *netdev = priv->netdev;
+-      struct at76_rx_buffer *buf;
+-      struct ieee80211_hdr_3addr *i802_11_hdr;
+-      u16 frame_ctl;
+-
+-      if (priv->device_unplugged) {
+-              at76_dbg(DBG_DEVSTART, "device unplugged");
+-              if (urb)
+-                      at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
+-              return;
+-      }
++      struct at76_priv *priv = hw->priv;
+-      if (!priv->rx_skb || !netdev || !priv->rx_skb->data)
+-              return;
++      int i;
+-      buf = (struct at76_rx_buffer *)priv->rx_skb->data;
++      at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
++               "key->keylen %d",
++               __func__, cmd, key->alg, key->keyidx, key->keylen);
+-      i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet;
++      if (key->alg != ALG_WEP)
++              return -EOPNOTSUPP;
+-      frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
++      key->hw_key_idx = key->keyidx;
+-      if (urb->status != 0) {
+-              if (urb->status != -ENOENT && urb->status != -ECONNRESET)
+-                      at76_dbg(DBG_URB,
+-                               "%s %s: - nonzero Rx bulk status received: %d",
+-                               __func__, netdev->name, urb->status);
+-              return;
+-      }
++      mutex_lock(&priv->mtx);
+-      at76_dbg(DBG_RX_ATMEL_HDR,
+-               "%s: rx frame: rate %d rssi %d noise %d link %d %s",
+-               priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level,
+-               buf->link_quality, hex2str(i802_11_hdr, 48));
+-      if (priv->iw_mode == IW_MODE_MONITOR) {
+-              at76_rx_monitor_mode(priv);
+-              goto exit;
+-      }
++      switch (cmd) {
++      case SET_KEY:
++              memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
++              priv->wep_keys_len[key->keyidx] = key->keylen;
+-      /* there is a new bssid around, accept it: */
+-      if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) {
+-              at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name);
+-              schedule_work(&priv->work_new_bss);
+-      }
++              /* FIXME: find out how to do this properly */
++              priv->wep_key_id = key->keyidx;
+-      switch (frame_ctl & IEEE80211_FCTL_FTYPE) {
+-      case IEEE80211_FTYPE_DATA:
+-              at76_rx_data(priv);
+               break;
++      case DISABLE_KEY:
++      default:
++              priv->wep_keys_len[key->keyidx] = 0;
++              break;
++      }
+-      case IEEE80211_FTYPE_MGMT:
+-              /* jal: TODO: find out if we can update iwspy also on
+-                 other frames than management (might depend on the
+-                 radio chip / firmware version !) */
++      priv->wep_enabled = 0;
+-              at76_iwspy_update(priv, buf);
++      for (i = 0; i < WEP_KEYS; i++) {
++              if (priv->wep_keys_len[i] != 0)
++                      priv->wep_enabled = 1;
++      }
+-              at76_rx_mgmt(priv, buf);
+-              break;
++      at76_startup_device(priv);
+-      case IEEE80211_FTYPE_CTL:
+-              at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x",
+-                       priv->netdev->name, frame_ctl);
+-              break;
++      mutex_unlock(&priv->mtx);
+-      default:
+-              printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
+-                     priv->netdev->name, frame_ctl);
+-      }
+-exit:
+-      at76_submit_rx_urb(priv);
++      return 0;
+ }
+-/* Load firmware into kernel memory and parse it */
+-static struct fwentry *at76_load_firmware(struct usb_device *udev,
+-                                        enum board_type board_type)
+-{
+-      int ret;
+-      char *str;
+-      struct at76_fw_header *fwh;
+-      struct fwentry *fwe = &firmwares[board_type];
++static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
++                      const u8 *local_address, const u8 *address,
++                      struct ieee80211_key_conf *key)
++{
++      struct at76_priv *priv = hw->priv;
++      int ret = -EOPNOTSUPP;
++
++      at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
++               "key->keylen %d",
++               __func__, cmd, key->alg, key->keyidx, key->keylen);
+-      mutex_lock(&fw_mutex);
++      mutex_lock(&priv->mtx);
+-      if (fwe->loaded) {
+-              at76_dbg(DBG_FW, "re-using previously loaded fw");
+-              goto exit;
+-      }
++      priv->mib_buf.type = MIB_MAC_ENCRYPTION;
+-      at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
+-      ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
+-      if (ret < 0) {
+-              dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
+-                         fwe->fwname);
+-              dev_printk(KERN_ERR, &udev->dev,
+-                         "you may need to download the firmware from "
+-                         "http://developer.berlios.de/projects/at76c503a/");
++      if (cmd == DISABLE_KEY) {
++              priv->mib_buf.size = CIPHER_KEY_LEN;
++              priv->mib_buf.index = offsetof(struct mib_mac_encryption,
++                              cipher_default_keyvalue[key->keyidx]);
++              memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN);
++              if (at76_set_mib(priv, &priv->mib_buf) != CMD_STATUS_COMPLETE)
++                      ret = -EOPNOTSUPP; /* -EIO would be probably better */
++              else {
++
++                      priv->keys[key->keyidx].cipher = CIPHER_NONE;
++                      priv->keys[key->keyidx].keylen = 0;
++              };
++              if (priv->default_group_key == key->keyidx)
++                      priv->default_group_key = 0xff;
++
++              if (priv->default_pairwise_key == key->keyidx)
++                      priv->default_pairwise_key = 0xff;
++              /* If default pairwise key is removed, fall back to
++               * group key? */
++              ret = 0;
+               goto exit;
+-      }
++      };
+-      at76_dbg(DBG_FW, "got it.");
+-      fwh = (struct at76_fw_header *)(fwe->fw->data);
++      if (cmd == SET_KEY) {
++              /* store key into MIB */
++              priv->mib_buf.size = CIPHER_KEY_LEN;
++              priv->mib_buf.index = offsetof(struct mib_mac_encryption,
++                              cipher_default_keyvalue[key->keyidx]);
++              memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN);
++              memcpy(priv->mib_buf.data.data, key->key, key->keylen);
++
++              switch (key->alg) {
++              case ALG_WEP:
++                      if (key->keylen == 5) {
++                              priv->keys[key->keyidx].cipher =
++                                      CIPHER_WEP64;
++                              priv->keys[key->keyidx].keylen = 8;
++                      } else if (key->keylen == 13) {
++                              priv->keys[key->keyidx].cipher =
++                                      CIPHER_WEP128;
++                              /* Firmware needs this */
++                              priv->keys[key->keyidx].keylen = 8;
++                      } else {
++                              ret = -EOPNOTSUPP;
++                              goto exit;
++                      };
++                      break;
++              case ALG_TKIP:
++                      key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
++                      priv->keys[key->keyidx].cipher = CIPHER_TKIP;
++                      priv->keys[key->keyidx].keylen = 12;
++                      break;
+-      if (fwe->fw->size <= sizeof(*fwh)) {
+-              dev_printk(KERN_ERR, &udev->dev,
+-                         "firmware is too short (0x%zx)\n", fwe->fw->size);
+-              goto exit;
+-      }
++              case ALG_CCMP:
++                      if (!at76_is_505a(priv->board_type)) {
++                              ret = -EOPNOTSUPP;
++                              goto exit;
++                      };
++                      key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
++                      priv->keys[key->keyidx].cipher = CIPHER_CCMP;
++                      priv->keys[key->keyidx].keylen = 16;
++                      break;
+-      /* CRC currently not checked */
+-      fwe->board_type = le32_to_cpu(fwh->board_type);
+-      if (fwe->board_type != board_type) {
+-              dev_printk(KERN_ERR, &udev->dev,
+-                         "board type mismatch, requested %u, got %u\n",
+-                         board_type, fwe->board_type);
+-              goto exit;
+-      }
++              default:
++                      ret = -EOPNOTSUPP;
++                      goto exit;
++              };
+-      fwe->fw_version.major = fwh->major;
+-      fwe->fw_version.minor = fwh->minor;
+-      fwe->fw_version.patch = fwh->patch;
+-      fwe->fw_version.build = fwh->build;
++              priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher;
++              priv->mib_buf.data.data[39] = 1; /* Taken from atmelwlandriver,
++                                                  not documented */
++
++              if (is_valid_ether_addr(address))
++                      /* Pairwise key */
++                      priv->mib_buf.data.data[39] |= (KEY_PAIRWISE | KEY_TX);
++              else if (is_broadcast_ether_addr(address))
++                      /* Group key */
++                      priv->mib_buf.data.data[39] |= (KEY_TX);
++              else    /* Key used only for transmission ??? */
++                      priv->mib_buf.data.data[39] |= (KEY_TX);
++
++              if (at76_set_mib(priv, &priv->mib_buf) !=
++                              CMD_STATUS_COMPLETE) {
++                      ret = -EOPNOTSUPP; /* -EIO would be probably better */
++                      goto exit;
++              };
+-      str = (char *)fwh + le32_to_cpu(fwh->str_offset);
+-      fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
+-      fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
+-      fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
+-      fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
++              if ((key->alg == ALG_TKIP) || (key->alg == ALG_CCMP))
++                      at76_reset_rsc(priv);
+-      fwe->loaded = 1;
++              key->hw_key_idx = key->keyidx;
+-      dev_printk(KERN_DEBUG, &udev->dev,
+-                 "using firmware %s (version %d.%d.%d-%d)\n",
+-                 fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
++              /* Set up default keys */
++              if (is_broadcast_ether_addr(address))
++                      priv->default_group_key = key->keyidx;
++              if (is_valid_ether_addr(address))
++                      priv->default_pairwise_key = key->keyidx;
++
++              /* Set up encryption MIBs */
++
++              /* first block of settings */
++              priv->mib_buf.size = 3;
++              priv->mib_buf.index = offsetof(struct mib_mac_encryption,
++                              privacy_invoked);
++              priv->mib_buf.data.data[0] = 1; /* privacy_invoked */
++              priv->mib_buf.data.data[1] = priv->default_pairwise_key;
++              priv->mib_buf.data.data[2] = priv->default_group_key;
+-      at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
+-               le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
+-               le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
+-      at76_dbg(DBG_DEVSTART, "firmware id %s", str);
++              ret = at76_set_mib(priv, &priv->mib_buf);
++              if (ret != CMD_STATUS_COMPLETE)
++                      goto exit;
++
++              /* second block of settings */
++              priv->mib_buf.size = 3;
++              priv->mib_buf.index = offsetof(struct mib_mac_encryption,
++                              exclude_unencrypted);
++              priv->mib_buf.data.data[0] = 1; /* exclude_unencrypted */
++              priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */
++              priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */
++              ret = at76_set_mib(priv, &priv->mib_buf);
++              if (ret != CMD_STATUS_COMPLETE)
++                      goto exit;
++              ret = 0;
++      };
+ exit:
+-      mutex_unlock(&fw_mutex);
++      at76_dump_mib_mac_encryption(priv);
++      mutex_unlock(&priv->mtx);
++      return ret;
++}
+-      if (fwe->loaded)
+-              return fwe;
++static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
++                      const u8 *local_address, const u8 *address,
++                      struct ieee80211_key_conf *key)
++{
++      struct at76_priv *priv = hw->priv;
++
++      at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
++               "key->keylen %d",
++               __func__, cmd, key->alg, key->keyidx, key->keylen);
++
++      if (FIRMWARE_IS_WPA(priv->fw_version))
++              return at76_set_key_newfw(hw, cmd, local_address, address, key);
+       else
+-              return NULL;
++              return at76_set_key_oldfw(hw, cmd, local_address, address, key);
++
+ }
++static const struct ieee80211_ops at76_ops = {
++      .tx = at76_mac80211_tx,
++      .add_interface = at76_add_interface,
++      .remove_interface = at76_remove_interface,
++      .config = at76_config,
++      .config_interface = at76_config_interface,
++      .configure_filter = at76_configure_filter,
++      .start = at76_mac80211_start,
++      .stop = at76_mac80211_stop,
++      .hw_scan = at76_hw_scan,
++      .set_key = at76_set_key,
++};
++
+ /* Allocate network device and initialize private data */
+ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
+ {
+-      struct net_device *netdev;
++      struct ieee80211_hw *hw;
+       struct at76_priv *priv;
+-      int i;
+-      /* allocate memory for our device state and initialize it */
+-      netdev = alloc_etherdev(sizeof(struct at76_priv));
+-      if (!netdev) {
+-              dev_printk(KERN_ERR, &udev->dev, "out of memory\n");
++      hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
++      if (!hw) {
++              printk(KERN_ERR DRIVER_NAME ": could not register"
++                     " ieee80211_hw\n");
+               return NULL;
+       }
+-      priv = netdev_priv(netdev);
++      priv = hw->priv;
++      priv->hw = hw;
+       priv->udev = udev;
+-      priv->netdev = netdev;
+       mutex_init(&priv->mtx);
+-      INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done);
+-      INIT_WORK(&priv->work_join, at76_work_join);
+-      INIT_WORK(&priv->work_new_bss, at76_work_new_bss);
+-      INIT_WORK(&priv->work_start_scan, at76_work_start_scan);
+       INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
+       INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
+-      INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart);
+-      INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan);
+-      INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon);
+-      INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth);
+-      INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc);
+-
+-      spin_lock_init(&priv->mgmt_spinlock);
+-      priv->next_mgmt_bulk = NULL;
+-      priv->mac_state = MAC_INIT;
+-
+-      /* initialize empty BSS list */
+-      priv->curr_bss = NULL;
+-      INIT_LIST_HEAD(&priv->bss_list);
+-      spin_lock_init(&priv->bss_list_spinlock);
+-
+-      init_timer(&priv->bss_list_timer);
+-      priv->bss_list_timer.data = (unsigned long)priv;
+-      priv->bss_list_timer.function = at76_bss_list_timeout;
+-
+-      spin_lock_init(&priv->spy_spinlock);
+-
+-      /* mark all rx data entries as unused */
+-      for (i = 0; i < NR_RX_DATA_BUF; i++)
+-              priv->rx_data[i].skb = NULL;
++      INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
+       priv->rx_tasklet.func = at76_rx_tasklet;
+       priv->rx_tasklet.data = 0;
+@@ -5197,6 +2371,9 @@
+       priv->pm_mode = AT76_PM_OFF;
+       priv->pm_period = 0;
++      /* unit us */
++      priv->hw->channel_change_time = 100000;
++
+       return priv;
+ }
+@@ -5259,11 +2436,42 @@
+       return 0;
+ }
++static struct ieee80211_rate at76_rates[] = {
++      { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
++      { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
++      { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
++      { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
++};
++
++static struct ieee80211_channel at76_channels[] = {
++      { .center_freq = 2412, .hw_value = 1 },
++      { .center_freq = 2417, .hw_value = 2 },
++      { .center_freq = 2422, .hw_value = 3 },
++      { .center_freq = 2427, .hw_value = 4 },
++      { .center_freq = 2432, .hw_value = 5 },
++      { .center_freq = 2437, .hw_value = 6 },
++      { .center_freq = 2442, .hw_value = 7 },
++      { .center_freq = 2447, .hw_value = 8 },
++      { .center_freq = 2452, .hw_value = 9 },
++      { .center_freq = 2457, .hw_value = 10 },
++      { .center_freq = 2462, .hw_value = 11 },
++      { .center_freq = 2467, .hw_value = 12 },
++      { .center_freq = 2472, .hw_value = 13 },
++      { .center_freq = 2484, .hw_value = 14 }
++};
++
++static struct ieee80211_supported_band at76_supported_band = {
++      .channels = at76_channels,
++      .n_channels = ARRAY_SIZE(at76_channels),
++      .bitrates = at76_rates,
++      .n_bitrates = ARRAY_SIZE(at76_rates),
++};
++
+ /* Register network device and initialize the hardware */
+ static int at76_init_new_device(struct at76_priv *priv,
+                               struct usb_interface *interface)
+ {
+-      struct net_device *netdev = priv->netdev;
++      struct device *dev = &interface->dev;
+       int ret;
+       /* set up the endpoint information */
+@@ -5279,14 +2487,11 @@
+       /* MAC address */
+       ret = at76_get_hw_config(priv);
+       if (ret < 0) {
+-              dev_printk(KERN_ERR, &interface->dev,
+-                         "cannot get MAC address\n");
++              dev_err(dev, "cannot get MAC address\n");
+               goto exit;
+       }
+       priv->domain = at76_get_reg_domain(priv->regulatory_domain);
+-      /* init. netdev->dev_addr */
+-      memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN);
+       priv->channel = DEF_CHANNEL;
+       priv->iw_mode = IW_MODE_INFRA;
+@@ -5296,47 +2501,54 @@
+       priv->txrate = TX_RATE_AUTO;
+       priv->preamble_type = PREAMBLE_TYPE_LONG;
+       priv->beacon_period = 100;
+-      priv->beacons_last_qual = jiffies;
+       priv->auth_mode = WLAN_AUTH_OPEN;
+       priv->scan_min_time = DEF_SCAN_MIN_TIME;
+       priv->scan_max_time = DEF_SCAN_MAX_TIME;
+       priv->scan_mode = SCAN_TYPE_ACTIVE;
++      priv->default_pairwise_key = 0xff;
++      priv->default_group_key = 0xff;
++
++      /* mac80211 initialisation */
++      priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
++
++      if (FIRMWARE_IS_WPA(priv->fw_version) &&
++              (at76_is_503rfmd(priv->board_type) ||
++               at76_is_505(priv->board_type)))
++              priv->hw->flags = IEEE80211_HW_SIGNAL_UNSPEC;
++      else
++              priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
++                                IEEE80211_HW_SIGNAL_UNSPEC;
+-      netdev->flags &= ~IFF_MULTICAST;        /* not yet or never */
+-      netdev->open = at76_open;
+-      netdev->stop = at76_stop;
+-      netdev->get_stats = at76_get_stats;
+-      netdev->ethtool_ops = &at76_ethtool_ops;
+-
+-      /* Add pointers to enable iwspy support. */
+-      priv->wireless_data.spy_data = &priv->spy_data;
+-      netdev->wireless_data = &priv->wireless_data;
+-
+-      netdev->hard_start_xmit = at76_tx;
+-      netdev->tx_timeout = at76_tx_timeout;
+-      netdev->watchdog_timeo = 2 * HZ;
+-      netdev->wireless_handlers = &at76_handler_def;
+-      netdev->set_multicast_list = at76_set_multicast;
+-      netdev->set_mac_address = at76_set_mac_address;
+-      dev_alloc_name(netdev, "wlan%d");
++      priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+-      ret = register_netdev(priv->netdev);
++      SET_IEEE80211_DEV(priv->hw, &interface->dev);
++      SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
++
++      ret = ieee80211_register_hw(priv->hw);
+       if (ret) {
+-              dev_printk(KERN_ERR, &interface->dev,
+-                         "cannot register netdevice (status %d)!\n", ret);
++              dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret);
+               goto exit;
+       }
+-      priv->netdev_registered = 1;
+-      printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
+-             netdev->name, dev_name(&interface->dev), mac2str(priv->mac_addr),
+-             priv->fw_version.major, priv->fw_version.minor,
+-             priv->fw_version.patch, priv->fw_version.build);
+-      printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name,
+-             priv->regulatory_domain, priv->domain->name);
++      priv->mac80211_registered = 1;
+-      /* we let this timer run the whole time this driver instance lives */
+-      mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
++      dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
++               wiphy_name(priv->hw->wiphy),
++               dev_name(&interface->dev), mac2str(priv->mac_addr),
++               priv->fw_version.major, priv->fw_version.minor,
++               priv->fw_version.patch, priv->fw_version.build);
++      dev_info(dev, "%s: regulatory domain 0x%02x: %s\n",
++               wiphy_name(priv->hw->wiphy),
++               priv->regulatory_domain, priv->domain->name);
++      dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy));
++      if (!FIRMWARE_IS_WPA(priv->fw_version))
++              printk("none\n");
++      else {
++              if (!at76_is_505a(priv->board_type))
++                      printk("TKIP\n");
++              else
++                      printk("TKIP, AES/CCMP\n");
++      };
+ exit:
+       return ret;
+@@ -5344,15 +2556,13 @@
+ static void at76_delete_device(struct at76_priv *priv)
+ {
+-      int i;
+-
+       at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
+       /* The device is gone, don't bother turning it off */
+       priv->device_unplugged = 1;
+-      if (priv->netdev_registered)
+-              unregister_netdev(priv->netdev);
++      if (priv->mac80211_registered)
++              ieee80211_unregister_hw(priv->hw);
+       /* assuming we used keventd, it must quiesce too */
+       flush_scheduled_work();
+@@ -5373,25 +2583,11 @@
+       if (priv->rx_skb)
+               kfree_skb(priv->rx_skb);
+-      at76_free_bss_list(priv);
+-      del_timer_sync(&priv->bss_list_timer);
+-      cancel_delayed_work(&priv->dwork_get_scan);
+-      cancel_delayed_work(&priv->dwork_beacon);
+-      cancel_delayed_work(&priv->dwork_auth);
+-      cancel_delayed_work(&priv->dwork_assoc);
+-
+-      if (priv->mac_state == MAC_CONNECTED)
+-              at76_iwevent_bss_disconnect(priv->netdev);
+-
+-      for (i = 0; i < NR_RX_DATA_BUF; i++)
+-              if (priv->rx_data[i].skb) {
+-                      dev_kfree_skb(priv->rx_data[i].skb);
+-                      priv->rx_data[i].skb = NULL;
+-              }
+       usb_put_dev(priv->udev);
+-      at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__);
+-      free_netdev(priv->netdev);      /* priv is in netdev */
++      at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
++               __func__);
++      ieee80211_free_hw(priv->hw);
+       at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
+ }
+@@ -5425,8 +2621,8 @@
+          we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
+       if (op_mode == OPMODE_HW_CONFIG_MODE) {
+-              dev_printk(KERN_ERR, &interface->dev,
+-                         "cannot handle a device in HW_CONFIG_MODE\n");
++              dev_err(&interface->dev,
++                      "cannot handle a device in HW_CONFIG_MODE\n");
+               ret = -EBUSY;
+               goto error;
+       }
+@@ -5434,13 +2630,12 @@
+       if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
+           && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
+               /* download internal firmware part */
+-              dev_printk(KERN_DEBUG, &interface->dev,
+-                         "downloading internal firmware\n");
++              dev_dbg(&interface->dev, "downloading internal firmware\n");
+               ret = at76_load_internal_fw(udev, fwe);
+               if (ret < 0) {
+-                      dev_printk(KERN_ERR, &interface->dev,
+-                                 "error %d downloading internal firmware\n",
+-                                 ret);
++                      dev_err(&interface->dev,
++                              "error %d downloading internal firmware\n",
++                              ret);
+                       goto error;
+               }
+               usb_put_dev(udev);
+@@ -5465,8 +2660,7 @@
+               need_ext_fw = 1;
+       if (need_ext_fw) {
+-              dev_printk(KERN_DEBUG, &interface->dev,
+-                         "downloading external firmware\n");
++              dev_dbg(&interface->dev, "downloading external firmware\n");
+               ret = at76_load_external_fw(udev, fwe);
+               if (ret)
+@@ -5475,8 +2669,8 @@
+               /* Re-check firmware version */
+               ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
+               if (ret < 0) {
+-                      dev_printk(KERN_ERR, &interface->dev,
+-                                 "error %d getting firmware version\n", ret);
++                      dev_err(&interface->dev,
++                              "error %d getting firmware version\n", ret);
+                       goto error;
+               }
+       }
+@@ -5487,7 +2681,6 @@
+               goto error;
+       }
+-      SET_NETDEV_DEV(priv->netdev, &interface->dev);
+       usb_set_intfdata(interface, priv);
+       memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version));
+@@ -5515,7 +2708,7 @@
+       if (!priv)
+               return;
+-      printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name);
++      printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy));
+       at76_delete_device(priv);
+       dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
+ }
+@@ -5571,5 +2764,8 @@
+ MODULE_AUTHOR("Nick Jones");
+ MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
+ MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
++MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
++MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
++MODULE_AUTHOR("Milan Plzik <milan.plzik@gmail.com>");
+ MODULE_DESCRIPTION(DRIVER_DESC);
+ MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/at76_usb/at76_usb.h linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/at76_usb.h
+--- linux-2.6.29.owrt/drivers/staging/at76_usb/at76_usb.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/at76_usb.h  2009-05-10 23:48:29.000000000 +0200
+@@ -34,23 +34,6 @@
+       BOARD_505AMX = 8
+ };
+-/* our private ioctl's */
+-/* preamble length (0 - long, 1 - short, 2 - auto) */
+-#define AT76_SET_SHORT_PREAMBLE               (SIOCIWFIRSTPRIV + 0)
+-#define AT76_GET_SHORT_PREAMBLE               (SIOCIWFIRSTPRIV + 1)
+-/* which debug channels are enabled */
+-#define AT76_SET_DEBUG                        (SIOCIWFIRSTPRIV + 2)
+-#define AT76_GET_DEBUG                        (SIOCIWFIRSTPRIV + 3)
+-/* power save mode (incl. the Atmel proprietary smart save mode) */
+-#define AT76_SET_POWERSAVE_MODE               (SIOCIWFIRSTPRIV + 4)
+-#define AT76_GET_POWERSAVE_MODE               (SIOCIWFIRSTPRIV + 5)
+-/* min and max channel times for scan */
+-#define AT76_SET_SCAN_TIMES           (SIOCIWFIRSTPRIV + 6)
+-#define AT76_GET_SCAN_TIMES           (SIOCIWFIRSTPRIV + 7)
+-/* scan mode (0 - active, 1 - passive) */
+-#define AT76_SET_SCAN_MODE            (SIOCIWFIRSTPRIV + 8)
+-#define AT76_GET_SCAN_MODE            (SIOCIWFIRSTPRIV + 9)
+-
+ #define CMD_STATUS_IDLE                               0x00
+ #define CMD_STATUS_COMPLETE                   0x01
+ #define CMD_STATUS_UNKNOWN                    0x02
+@@ -82,6 +65,7 @@
+ #define MIB_MAC                       0x03
+ #define MIB_MAC_MGMT          0x05
+ #define MIB_MAC_WEP           0x06
++#define MIB_MAC_ENCRYPTION    0x06
+ #define MIB_PHY                       0x07
+ #define MIB_FW_VERSION                0x08
+ #define MIB_MDOMAIN           0x09
+@@ -106,6 +90,26 @@
+ #define AT76_PM_ON            2
+ #define AT76_PM_SMART         3
++/* cipher values for encryption keys */
++#define CIPHER_NONE           0       /* this value is only guessed */
++#define CIPHER_WEP64          1
++#define CIPHER_TKIP           2
++#define CIPHER_CCMP           3
++#define CIPHER_CCX            4       /* for consistency sake only */
++#define CIPHER_WEP128         5
++
++/* bit flags key types for encryption keys */
++#define KEY_PAIRWISE          2
++#define KEY_TX                        4
++
++#define CIPHER_KEYS           (4)
++#define CIPHER_KEY_LEN                (40)
++
++struct key_config {
++      u8 cipher;
++      u8 keylen;
++};
++
+ struct hwcfg_r505 {
+       u8 cr39_values[14];
+       u8 reserved1[14];
+@@ -147,6 +151,9 @@
+ #define WEP_SMALL_KEY_LEN     (40 / 8)
+ #define WEP_LARGE_KEY_LEN     (104 / 8)
++#define WEP_KEYS              (4)
++
++
+ struct at76_card_config {
+       u8 exclude_unencrypted;
+@@ -161,7 +168,7 @@
+       u8 privacy_invoked;
+       u8 wep_default_key_id;  /* 0..3 */
+       u8 current_ssid[32];
+-      u8 wep_default_key_value[4][WEP_KEY_LEN];
++      u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN];
+       u8 ssid_len;
+       u8 short_preamble;
+       __le16 beacon_period;
+@@ -186,7 +193,7 @@
+       u8 link_quality;
+       u8 noise_level;
+       __le32 rx_time;
+-      u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
++      u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+ } __attribute__((packed));
+ /* Length of Atmel-specific Tx header before 802.11 frame */
+@@ -196,8 +203,11 @@
+       __le16 wlength;
+       u8 tx_rate;
+       u8 padding;
+-      u8 reserved[4];
+-      u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
++      u8 key_id;
++      u8 cipher_type;
++      u8 cipher_length;
++      u8 reserved;
++      u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
+ } __attribute__((packed));
+ /* defines for scan_type below */
+@@ -244,6 +254,7 @@
+               u8 byte;
+               __le16 word;
+               u8 addr[ETH_ALEN];
++              u8 data[256];   /* we need more space for mib_mac_encryption */
+       } data;
+ } __attribute__((packed));
+@@ -317,10 +328,24 @@
+       u8 exclude_unencrypted;
+       __le32 wep_icv_error_count;
+       __le32 wep_excluded_count;
+-      u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN];
++      u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN];
+       u8 encryption_level;    /* 1 for 40bit, 2 for 104bit encryption */
+ } __attribute__((packed));
++struct mib_mac_encryption {
++      u8 cipher_default_keyvalue[CIPHER_KEYS][CIPHER_KEY_LEN];
++      u8 tkip_bssid[6];
++      u8 privacy_invoked;
++      u8 cipher_default_key_id;
++      u8 cipher_default_group_key_id;
++      u8 exclude_unencrypted;
++      u8 wep_encryption_type;
++      u8 ckip_key_permutation;        /* bool */
++      __le32 wep_icv_error_count;
++      __le32 wep_excluded_count;
++      u8 key_rsc[CIPHER_KEYS][8];
++} __attribute__((packed));
++
+ struct mib_phy {
+       __le32 ed_threshold;
+@@ -364,16 +389,6 @@
+       __le32 ext_fw_len;      /* external firmware image length */
+ } __attribute__((packed));
+-enum mac_state {
+-      MAC_INIT,
+-      MAC_SCANNING,
+-      MAC_AUTH,
+-      MAC_ASSOC,
+-      MAC_JOINING,
+-      MAC_CONNECTED,
+-      MAC_OWN_IBSS
+-};
+-
+ /* a description of a regulatory domain and the allowed channels */
+ struct reg_domain {
+       u16 code;
+@@ -381,47 +396,6 @@
+       u32 channel_map;        /* if bit N is set, channel (N+1) is allowed */
+ };
+-/* how long do we keep a (I)BSS in the bss_list in jiffies
+-   this should be long enough for the user to retrieve the table
+-   (by iwlist ?) after the device started, because all entries from
+-   other channels than the one the device locks on get removed, too */
+-#define BSS_LIST_TIMEOUT      (120 * HZ)
+-/* struct to store BSS info found during scan */
+-#define BSS_LIST_MAX_RATE_LEN 32      /* 32 rates should be enough ... */
+-
+-struct bss_info {
+-      struct list_head list;
+-
+-      u8 bssid[ETH_ALEN];     /* bssid */
+-      u8 ssid[IW_ESSID_MAX_SIZE];     /* essid */
+-      u8 ssid_len;            /* length of ssid above */
+-      u8 channel;
+-      u16 capa;               /* BSS capabilities */
+-      u16 beacon_interval;    /* beacon interval, Kus (1024 microseconds) */
+-      u8 rates[BSS_LIST_MAX_RATE_LEN];        /* supported rates in units of
+-                                                 500 kbps, ORed with 0x80 for
+-                                                 basic rates */
+-      u8 rates_len;
+-
+-      /* quality of received beacon */
+-      u8 rssi;
+-      u8 link_qual;
+-      u8 noise_level;
+-
+-      unsigned long last_rx;  /* time (jiffies) of last beacon received */
+-};
+-
+-/* a rx data buffer to collect rx fragments */
+-struct rx_data_buf {
+-      u8 sender[ETH_ALEN];    /* sender address */
+-      u16 seqnr;              /* sequence number */
+-      u16 fragnr;             /* last fragment received */
+-      unsigned long last_rx;  /* jiffies of last rx */
+-      struct sk_buff *skb;    /* == NULL if entry is free */
+-};
+-
+-#define NR_RX_DATA_BUF                8
+-
+ /* Data for one loaded firmware file */
+ struct fwentry {
+       const char *const fwname;
+@@ -438,11 +412,9 @@
+ struct at76_priv {
+       struct usb_device *udev;        /* USB device pointer */
+-      struct net_device *netdev;      /* net device pointer */
+-      struct net_device_stats stats;  /* net device stats */
+-      struct iw_statistics wstats;    /* wireless stats */
+       struct sk_buff *rx_skb; /* skbuff for receiving data */
++      struct sk_buff *tx_skb; /* skbuff for transmitting data */
+       void *bulk_out_buffer;  /* buffer for sending data */
+       struct urb *tx_urb;     /* URB for sending data */
+@@ -454,26 +426,17 @@
+       struct mutex mtx;       /* locks this structure */
+       /* work queues */
+-      struct work_struct work_assoc_done;
+-      struct work_struct work_join;
+-      struct work_struct work_new_bss;
+-      struct work_struct work_start_scan;
+       struct work_struct work_set_promisc;
+       struct work_struct work_submit_rx;
+-      struct delayed_work dwork_restart;
+-      struct delayed_work dwork_get_scan;
+-      struct delayed_work dwork_beacon;
+-      struct delayed_work dwork_auth;
+-      struct delayed_work dwork_assoc;
++      struct delayed_work dwork_hw_scan;
+       struct tasklet_struct rx_tasklet;
+       /* the WEP stuff */
+       int wep_enabled;        /* 1 if WEP is enabled */
+       int wep_key_id;         /* key id to be used */
+-      u8 wep_keys[WEP_KEYS][WEP_KEY_LEN];     /* the four WEP keys,
+-                                                 5 or 13 bytes are used */
+-      u8 wep_keys_len[WEP_KEYS];      /* the length of the above keys */
++      u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN];       /* WEP keys */
++      u8 wep_keys_len[WEP_KEYS];      /* length of WEP keys */
+       int channel;
+       int iw_mode;
+@@ -495,44 +458,13 @@
+       int scan_mode;          /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
+       int scan_need_any;      /* if set, need to scan for any ESSID */
+-      /* the list we got from scanning */
+-      spinlock_t bss_list_spinlock;   /* protects bss_list operations */
+-      struct list_head bss_list;      /* list of BSS we got beacons from */
+-      struct timer_list bss_list_timer;       /* timer to purge old entries
+-                                                 from bss_list */
+-      struct bss_info *curr_bss;      /* current BSS */
+       u16 assoc_id;           /* current association ID, if associated */
+-      u8 wanted_bssid[ETH_ALEN];
+-      int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */
+-
+-      /* some data for infrastructure mode only */
+-      spinlock_t mgmt_spinlock;       /* this spinlock protects access to
+-                                         next_mgmt_bulk */
+-
+-      struct at76_tx_buffer *next_mgmt_bulk;  /* pending management msg to
+-                                                 send via bulk out */
+-      enum mac_state mac_state;
+-      enum {
+-              SCAN_IDLE,
+-              SCAN_IN_PROGRESS,
+-              SCAN_COMPLETED
+-      } scan_state;
+-      time_t last_scan;
+-
+-      int retries;            /* remaining retries in case of timeout when
+-                               * sending AuthReq or AssocReq */
+       u8 pm_mode;             /* power management mode */
+       u32 pm_period;          /* power management period in microseconds */
+       struct reg_domain const *domain;        /* reg domain description */
+-      /* iwspy support */
+-      spinlock_t spy_spinlock;
+-      struct iw_spy_data spy_data;
+-
+-      struct iw_public_data wireless_data;
+-
+       /* These fields contain HW config provided by the device (not all of
+        * these fields are used by all board types) */
+       u8 mac_addr[ETH_ALEN];
+@@ -540,9 +472,6 @@
+       struct at76_card_config card_config;
+-      /* store rx fragments until complete */
+-      struct rx_data_buf rx_data[NR_RX_DATA_BUF];
+-
+       enum board_type board_type;
+       struct mib_fw_version fw_version;
+@@ -550,58 +479,20 @@
+       unsigned int netdev_registered:1;
+       struct set_mib_buffer mib_buf;  /* global buffer for set_mib calls */
+-      /* beacon counting */
+       int beacon_period;      /* period of mgmt beacons, Kus */
+-      int beacons_received;
+-      unsigned long beacons_last_qual;        /* time we restarted counting
+-                                                 beacons */
+-};
+-struct at76_rx_radiotap {
+-      struct ieee80211_radiotap_header rt_hdr;
+-      __le64 rt_tsft;
+-      u8 rt_flags;
+-      u8 rt_rate;
+-      s8 rt_signal;
+-      s8 rt_noise;
+-};
+-
+-#define AT76_RX_RADIOTAP_PRESENT                \
+-      ((1 << IEEE80211_RADIOTAP_TSFT)         | \
+-      (1 << IEEE80211_RADIOTAP_FLAGS)         | \
+-      (1 << IEEE80211_RADIOTAP_RATE)          | \
+-      (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL)  | \
+-      (1 << IEEE80211_RADIOTAP_DB_ANTNOISE))
+-
+-#define BEACON_MAX_DATA_LENGTH        1500
+-
+-/* the maximum size of an AssocReq packet */
+-#define ASSOCREQ_MAX_SIZE \
+-  (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \
+-   1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4)
+-
+-/* for shared secret auth, add the challenge text size */
+-#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth))
++      struct ieee80211_hw *hw;
++      int mac80211_registered;
+-/* Maximal number of AuthReq retries */
+-#define AUTH_RETRIES          3
+-
+-/* Maximal number of AssocReq retries */
+-#define ASSOC_RETRIES         3
+-
+-/* Beacon timeout in managed mode when we are connected */
+-#define BEACON_TIMEOUT                (10 * HZ)
+-
+-/* Timeout for authentication response */
+-#define AUTH_TIMEOUT          (1 * HZ)
++      struct key_config keys[4];      /* installed key types */
++      u8 default_pairwise_key;
++      u8 default_group_key;
++};
+-/* Timeout for association response */
+-#define ASSOC_TIMEOUT         (1 * HZ)
++#define AT76_SUPPORTED_FILTERS FIF_PROMISC_IN_BSS
+-/* Polling interval when scan is running */
+ #define SCAN_POLL_INTERVAL    (HZ / 4)
+-/* Command completion timeout */
+ #define CMD_COMPLETION_TIMEOUT        (5 * HZ)
+ #define DEF_RTS_THRESHOLD     1536
+@@ -611,8 +502,6 @@
+ #define DEF_SCAN_MIN_TIME     10
+ #define DEF_SCAN_MAX_TIME     120
+-#define MAX_RTS_THRESHOLD     (MAX_FRAG_THRESHOLD + 1)
+-
+ /* the max padding size for tx in bytes (see calc_padding) */
+ #define MAX_PADDING_SIZE      53
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/at76_usb/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/at76_usb/Kconfig 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/at76_usb/Kconfig     2009-05-10 23:48:29.000000000 +0200
+@@ -1,6 +1,6 @@
+ config USB_ATMEL
+       tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+-      depends on WLAN_80211 && USB
++      depends on MAC80211 && WLAN_80211 && USB
+       default N
+       select FW_LOADER
+       ---help---
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/asyncmesg.h linux-2.6.29-rc3.owrt/drivers/staging/benet/asyncmesg.h
+--- linux-2.6.29.owrt/drivers/staging/benet/asyncmesg.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/asyncmesg.h    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __asyncmesg_amap_h__
++#define __asyncmesg_amap_h__
++#include "fwcmd_common.h"
++
++/* --- ASYNC_EVENT_CODES --- */
++#define ASYNC_EVENT_CODE_LINK_STATE     (1)
++#define ASYNC_EVENT_CODE_ISCSI          (2)
++
++/* --- ASYNC_LINK_STATES --- */
++#define ASYNC_EVENT_LINK_DOWN           (0)   /* Link Down on a port */
++#define ASYNC_EVENT_LINK_UP             (1)   /* Link Up on a port */
++
++/*
++ * The last 4 bytes of the async events have this common format.  It allows
++ * the driver to distinguish [link]MCC_CQ_ENTRY[/link] structs from
++ * asynchronous events.  Both arrive on the same completion queue.  This
++ * structure also contains the common fields used to decode the async event.
++ */
++struct BE_ASYNC_EVENT_TRAILER_AMAP {
++      u8 rsvd0[8];    /* DWORD 0 */
++      u8 event_code[8];       /* DWORD 0 */
++      u8 event_type[8];       /* DWORD 0 */
++      u8 rsvd1[6];    /* DWORD 0 */
++      u8 async_event; /* DWORD 0 */
++      u8 valid;               /* DWORD 0 */
++} __packed;
++struct ASYNC_EVENT_TRAILER_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Applicable in Initiator, Target and NIC modes.
++ * A link state async event is seen by all device drivers as soon they
++ * create an MCC ring. Thereafter, anytime the link status changes the
++ * drivers will receive a link state async event. Notifications continue to
++ * be sent until a driver destroys its MCC ring. A link down event is
++ * reported when either port loses link. A link up event is reported
++ * when either port regains link. When BE's failover mechanism is enabled, a
++ * link down on the active port causes traffic to be diverted to the standby
++ * port by the BE's ARM firmware (assuming the standby port has link). In
++ * this case, the standy port assumes the active status. Note: when link is
++ * restored on the failed port, traffic continues on the currently active
++ * port. The ARM firmware does not attempt to 'fail back' traffic to
++ * the restored port.
++ */
++struct BE_ASYNC_EVENT_LINK_STATE_AMAP {
++      u8 port0_link_status[8];
++      u8 port1_link_status[8];
++      u8 active_port[8];
++      u8 rsvd0[8];    /* DWORD 0 */
++      u8 port0_duplex[8];
++      u8 port0_speed[8];
++      u8 port1_duplex[8];
++      u8 port1_speed[8];
++      u8 port0_fault[8];
++      u8 port1_fault[8];
++      u8 rsvd1[2][8]; /* DWORD 2 */
++      struct BE_ASYNC_EVENT_TRAILER_AMAP trailer;
++} __packed;
++struct ASYNC_EVENT_LINK_STATE_AMAP {
++      u32 dw[4];
++};
++#endif /* __asyncmesg_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_cm.h linux-2.6.29-rc3.owrt/drivers/staging/benet/be_cm.h
+--- linux-2.6.29.owrt/drivers/staging/benet/be_cm.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_cm.h        2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,134 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __be_cm_amap_h__
++#define __be_cm_amap_h__
++#include "be_common.h"
++#include "etx_context.h"
++#include "mpu_context.h"
++
++/*
++ * --- CEV_WATERMARK_ENUM ---
++ * CQ/EQ Watermark Encodings. Encoded as number of free entries in
++ * Queue when Watermark is reached.
++ */
++#define CEV_WMARK_0        (0)        /* Watermark when Queue full */
++#define CEV_WMARK_16       (1)        /* Watermark at 16 free entries */
++#define CEV_WMARK_32       (2)        /* Watermark at 32 free entries */
++#define CEV_WMARK_48       (3)        /* Watermark at 48 free entries */
++#define CEV_WMARK_64       (4)        /* Watermark at 64 free entries */
++#define CEV_WMARK_80       (5)        /* Watermark at 80 free entries */
++#define CEV_WMARK_96       (6)        /* Watermark at 96 free entries */
++#define CEV_WMARK_112      (7)        /* Watermark at 112 free entries */
++#define CEV_WMARK_128      (8)        /* Watermark at 128 free entries */
++#define CEV_WMARK_144      (9)        /* Watermark at 144 free entries */
++#define CEV_WMARK_160      (10)       /* Watermark at 160 free entries */
++#define CEV_WMARK_176      (11)       /* Watermark at 176 free entries */
++#define CEV_WMARK_192      (12)       /* Watermark at 192 free entries */
++#define CEV_WMARK_208      (13)       /* Watermark at 208 free entries */
++#define CEV_WMARK_224      (14)       /* Watermark at 224 free entries */
++#define CEV_WMARK_240      (15)       /* Watermark at 240 free entries */
++
++/*
++ * --- CQ_CNT_ENUM ---
++ * Completion Queue Count Encodings.
++ */
++#define CEV_CQ_CNT_256                  (0)   /* CQ has 256 entries */
++#define CEV_CQ_CNT_512                  (1)   /* CQ has 512 entries */
++#define CEV_CQ_CNT_1024                 (2)   /* CQ has 1024 entries */
++
++/*
++ * --- EQ_CNT_ENUM ---
++ * Event Queue Count Encodings.
++ */
++#define CEV_EQ_CNT_256     (0)        /* EQ has 256 entries (16-byte EQEs only) */
++#define CEV_EQ_CNT_512     (1)        /* EQ has 512 entries (16-byte EQEs only) */
++#define CEV_EQ_CNT_1024    (2)        /* EQ has 1024 entries (4-byte or */
++                              /* 16-byte EQEs only) */
++#define CEV_EQ_CNT_2048    (3)        /* EQ has 2048 entries (4-byte or */
++                              /* 16-byte EQEs only) */
++#define CEV_EQ_CNT_4096    (4)        /* EQ has 4096 entries (4-byte EQEs only) */
++
++/*
++ * --- EQ_SIZE_ENUM ---
++ * Event Queue Entry Size Encoding.
++ */
++#define CEV_EQ_SIZE_4                   (0)   /* EQE is 4 bytes */
++#define CEV_EQ_SIZE_16                  (1)   /* EQE is 16 bytes */
++
++/*
++ * Completion Queue Context Table Entry. Contains the state of a CQ.
++ * Located in RAM within the CEV block.
++ */
++struct BE_CQ_CONTEXT_AMAP {
++      u8 Cidx[11];    /* DWORD 0 */
++      u8 Watermark[4];        /* DWORD 0 */
++      u8 NoDelay;             /* DWORD 0 */
++      u8 EPIdx[11];   /* DWORD 0 */
++      u8 Count[2];    /* DWORD 0 */
++      u8 valid;               /* DWORD 0 */
++      u8 SolEvent;    /* DWORD 0 */
++      u8 Eventable;   /* DWORD 0 */
++      u8 Pidx[11];    /* DWORD 1 */
++      u8 PD[10];              /* DWORD 1 */
++      u8 EQID[7];             /* DWORD 1 */
++      u8 Func;                /* DWORD 1 */
++      u8 WME;         /* DWORD 1 */
++      u8 Stalled;             /* DWORD 1 */
++      u8 Armed;               /* DWORD 1 */
++} __packed;
++struct CQ_CONTEXT_AMAP {
++      u32 dw[2];
++};
++
++/*
++ * Event Queue Context Table Entry. Contains the state of an EQ.
++ * Located in RAM in the CEV block.
++ */
++struct BE_EQ_CONTEXT_AMAP {
++      u8 Cidx[13];    /* DWORD 0 */
++      u8 rsvd0[2];    /* DWORD 0 */
++      u8 Func;                /* DWORD 0 */
++      u8 EPIdx[13];   /* DWORD 0 */
++      u8 valid;               /* DWORD 0 */
++      u8 rsvd1;               /* DWORD 0 */
++      u8 Size;                /* DWORD 0 */
++      u8 Pidx[13];    /* DWORD 1 */
++      u8 rsvd2[3];    /* DWORD 1 */
++      u8 PD[10];              /* DWORD 1 */
++      u8 Count[3];    /* DWORD 1 */
++      u8 SolEvent;    /* DWORD 1 */
++      u8 Stalled;             /* DWORD 1 */
++      u8 Armed;               /* DWORD 1 */
++      u8 Watermark[4];        /* DWORD 2 */
++      u8 WME;         /* DWORD 2 */
++      u8 rsvd3[3];    /* DWORD 2 */
++      u8 EventVect[6];        /* DWORD 2 */
++      u8 rsvd4[2];    /* DWORD 2 */
++      u8 Delay[8];    /* DWORD 2 */
++      u8 rsvd5[6];    /* DWORD 2 */
++      u8 TMR;         /* DWORD 2 */
++      u8 rsvd6;               /* DWORD 2 */
++      u8 rsvd7[32];   /* DWORD 3 */
++} __packed;
++struct EQ_CONTEXT_AMAP {
++      u32 dw[4];
++};
++
++#endif /* __be_cm_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_common.h linux-2.6.29-rc3.owrt/drivers/staging/benet/be_common.h
+--- linux-2.6.29.owrt/drivers/staging/benet/be_common.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_common.h    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,53 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __be_common_amap_h__
++#define __be_common_amap_h__
++
++/* Physical Address. */
++struct BE_PHYS_ADDR_AMAP {
++      u8 lo[32];              /* DWORD 0 */
++      u8 hi[32];              /* DWORD 1 */
++} __packed;
++struct PHYS_ADDR_AMAP {
++      u32 dw[2];
++};
++
++/* Virtual Address. */
++struct BE_VIRT_ADDR_AMAP {
++      u8 lo[32];              /* DWORD 0 */
++      u8 hi[32];              /* DWORD 1 */
++} __packed;
++struct VIRT_ADDR_AMAP {
++      u32 dw[2];
++};
++
++/* Scatter gather element. */
++struct BE_SGE_AMAP {
++      u8 addr_hi[32]; /* DWORD 0 */
++      u8 addr_lo[32]; /* DWORD 1 */
++      u8 rsvd0[32];   /* DWORD 2 */
++      u8 len[16];             /* DWORD 3 */
++      u8 rsvd1[16];   /* DWORD 3 */
++} __packed;
++struct SGE_AMAP {
++      u32 dw[4];
++};
++
++#endif /* __be_common_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_ethtool.c linux-2.6.29-rc3.owrt/drivers/staging/benet/be_ethtool.c
+--- linux-2.6.29.owrt/drivers/staging/benet/be_ethtool.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_ethtool.c   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,348 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * be_ethtool.c
++ *
++ *    This file contains various functions that ethtool can use
++ *    to talk to the driver and the BE H/W.
++ */
++
++#include "benet.h"
++
++#include <linux/ethtool.h>
++
++static const char benet_gstrings_stats[][ETH_GSTRING_LEN] = {
++/* net_device_stats */
++      "rx_packets",
++      "tx_packets",
++      "rx_bytes",
++      "tx_bytes",
++      "rx_errors",
++      "tx_errors",
++      "rx_dropped",
++      "tx_dropped",
++      "multicast",
++      "collisions",
++      "rx_length_errors",
++      "rx_over_errors",
++      "rx_crc_errors",
++      "rx_frame_errors",
++      "rx_fifo_errors",
++      "rx_missed_errors",
++      "tx_aborted_errors",
++      "tx_carrier_errors",
++      "tx_fifo_errors",
++      "tx_heartbeat_errors",
++      "tx_window_errors",
++      "rx_compressed",
++      "tc_compressed",
++/* BE driver Stats */
++      "bes_tx_reqs",
++      "bes_tx_fails",
++      "bes_fwd_reqs",
++      "bes_tx_wrbs",
++      "bes_interrupts",
++      "bes_events",
++      "bes_tx_events",
++      "bes_rx_events",
++      "bes_tx_compl",
++      "bes_rx_compl",
++      "bes_ethrx_post_fail",
++      "bes_802_3_dropped_frames",
++      "bes_802_3_malformed_frames",
++      "bes_rx_misc_pkts",
++      "bes_eth_tx_rate",
++      "bes_eth_rx_rate",
++      "Num Packets collected",
++      "Num Times Flushed",
++};
++
++#define NET_DEV_STATS_LEN \
++      (sizeof(struct net_device_stats)/sizeof(unsigned long))
++
++#define BENET_STATS_LEN  ARRAY_SIZE(benet_gstrings_stats)
++
++static void
++be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++
++      strncpy(drvinfo->driver, be_driver_name, 32);
++      strncpy(drvinfo->version, be_drvr_ver, 32);
++      strncpy(drvinfo->fw_version, be_fw_ver, 32);
++      strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
++      drvinfo->testinfo_len = 0;
++      drvinfo->regdump_len = 0;
++      drvinfo->eedump_len = 0;
++}
++
++static int
++be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++
++      coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
++
++      coalesce->rx_coalesce_usecs = adapter->cur_eqd;
++      coalesce->rx_coalesce_usecs_high = adapter->max_eqd;
++      coalesce->rx_coalesce_usecs_low = adapter->min_eqd;
++
++      coalesce->tx_coalesce_usecs = adapter->cur_eqd;
++      coalesce->tx_coalesce_usecs_high = adapter->max_eqd;
++      coalesce->tx_coalesce_usecs_low = adapter->min_eqd;
++
++      coalesce->use_adaptive_rx_coalesce = adapter->enable_aic;
++      coalesce->use_adaptive_tx_coalesce = adapter->enable_aic;
++
++      return 0;
++}
++
++/*
++ * This routine is used to set interrup coalescing delay *as well as*
++ * the number of pkts to coalesce for LRO.
++ */
++static int
++be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      struct be_eq_object *eq_objectp;
++      u32 max, min, cur;
++      int status;
++
++      adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
++      if (adapter->max_rx_coal >= BE_LRO_MAX_PKTS)
++              adapter->max_rx_coal = BE_LRO_MAX_PKTS;
++
++      if (adapter->enable_aic == 0 &&
++              coalesce->use_adaptive_rx_coalesce == 1) {
++              /* if AIC is being turned on now, start with an EQD of 0 */
++              adapter->cur_eqd = 0;
++      }
++      adapter->enable_aic = coalesce->use_adaptive_rx_coalesce;
++
++      /* round off to nearest multiple of 8 */
++      max = (((coalesce->rx_coalesce_usecs_high + 4) >> 3) << 3);
++      min = (((coalesce->rx_coalesce_usecs_low + 4) >> 3) << 3);
++      cur = (((coalesce->rx_coalesce_usecs + 4) >> 3) << 3);
++
++      if (adapter->enable_aic) {
++              /* accept low and high if AIC is enabled */
++              if (max > MAX_EQD)
++                      max = MAX_EQD;
++              if (min > max)
++                      min = max;
++              adapter->max_eqd = max;
++              adapter->min_eqd = min;
++              if (adapter->cur_eqd > max)
++                      adapter->cur_eqd = max;
++              if (adapter->cur_eqd < min)
++                      adapter->cur_eqd = min;
++      } else {
++              /* accept specified coalesce_usecs only if AIC is disabled */
++              if (cur > MAX_EQD)
++                      cur = MAX_EQD;
++              eq_objectp = &pnob->event_q_obj;
++              status =
++                  be_eq_modify_delay(&pnob->fn_obj, 1, &eq_objectp, &cur,
++                                     NULL, NULL, NULL);
++              if (status == BE_SUCCESS)
++                      adapter->cur_eqd = cur;
++      }
++      return 0;
++}
++
++static u32 be_get_rx_csum(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      return adapter->rx_csum;
++}
++
++static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++
++      if (data)
++              adapter->rx_csum = 1;
++      else
++              adapter->rx_csum = 0;
++
++      return 0;
++}
++
++static void
++be_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
++{
++      switch (stringset) {
++      case ETH_SS_STATS:
++              memcpy(data, *benet_gstrings_stats,
++                     sizeof(benet_gstrings_stats));
++              break;
++      }
++}
++
++static int be_get_stats_count(struct net_device *netdev)
++{
++      return BENET_STATS_LEN;
++}
++
++static void
++be_get_ethtool_stats(struct net_device *netdev,
++                   struct ethtool_stats *stats, uint64_t *data)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      int i;
++
++      benet_get_stats(netdev);
++
++      for (i = 0; i <= NET_DEV_STATS_LEN; i++)
++              data[i] = ((unsigned long *)&adapter->benet_stats)[i];
++
++      data[i] = adapter->be_stat.bes_tx_reqs;
++      data[i++] = adapter->be_stat.bes_tx_fails;
++      data[i++] = adapter->be_stat.bes_fwd_reqs;
++      data[i++] = adapter->be_stat.bes_tx_wrbs;
++
++      data[i++] = adapter->be_stat.bes_ints;
++      data[i++] = adapter->be_stat.bes_events;
++      data[i++] = adapter->be_stat.bes_tx_events;
++      data[i++] = adapter->be_stat.bes_rx_events;
++      data[i++] = adapter->be_stat.bes_tx_compl;
++      data[i++] = adapter->be_stat.bes_rx_compl;
++      data[i++] = adapter->be_stat.bes_ethrx_post_fail;
++      data[i++] = adapter->be_stat.bes_802_3_dropped_frames;
++      data[i++] = adapter->be_stat.bes_802_3_malformed_frames;
++      data[i++] = adapter->be_stat.bes_rx_misc_pkts;
++      data[i++] = adapter->be_stat.bes_eth_tx_rate;
++      data[i++] = adapter->be_stat.bes_eth_rx_rate;
++      data[i++] = adapter->be_stat.bes_rx_coal;
++      data[i++] = adapter->be_stat.bes_rx_flush;
++
++}
++
++static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
++{
++      ecmd->speed = SPEED_10000;
++      ecmd->duplex = DUPLEX_FULL;
++      ecmd->autoneg = AUTONEG_DISABLE;
++      return 0;
++}
++
++/* Get the Ring parameters from the pnob */
++static void
++be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      /* Pre Set Maxims */
++      ring->rx_max_pending = pnob->rx_q_len;
++      ring->rx_mini_max_pending = ring->rx_mini_max_pending;
++      ring->rx_jumbo_max_pending = ring->rx_jumbo_max_pending;
++      ring->tx_max_pending = pnob->tx_q_len;
++
++      /* Current hardware Settings                */
++      ring->rx_pending = atomic_read(&pnob->rx_q_posted);
++      ring->rx_mini_pending = ring->rx_mini_pending;
++      ring->rx_jumbo_pending = ring->rx_jumbo_pending;
++      ring->tx_pending = atomic_read(&pnob->tx_q_used);
++
++}
++
++static void
++be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      bool rxfc, txfc;
++      int status;
++
++      status = be_eth_get_flow_control(&pnob->fn_obj, &txfc, &rxfc);
++      if (status != BE_SUCCESS) {
++              dev_info(&netdev->dev, "Unable to get pause frame settings\n");
++              /* return defaults */
++              ecmd->rx_pause = 1;
++              ecmd->tx_pause = 0;
++              ecmd->autoneg = AUTONEG_ENABLE;
++              return;
++      }
++
++      if (txfc == true)
++              ecmd->tx_pause = 1;
++      else
++              ecmd->tx_pause = 0;
++
++      if (rxfc == true)
++              ecmd->rx_pause = 1;
++      else
++              ecmd->rx_pause = 0;
++
++      ecmd->autoneg = AUTONEG_ENABLE;
++}
++
++static int
++be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      bool txfc, rxfc;
++      int status;
++
++      if (ecmd->autoneg != AUTONEG_ENABLE)
++              return -EINVAL;
++
++      if (ecmd->tx_pause)
++              txfc = true;
++      else
++              txfc = false;
++
++      if (ecmd->rx_pause)
++              rxfc = true;
++      else
++              rxfc = false;
++
++      status = be_eth_set_flow_control(&pnob->fn_obj, txfc, rxfc);
++      if (status != BE_SUCCESS) {
++              dev_info(&netdev->dev, "Unable to set pause frame settings\n");
++              return -1;
++      }
++      return 0;
++}
++
++struct ethtool_ops be_ethtool_ops = {
++      .get_settings = be_get_settings,
++      .get_drvinfo = be_get_drvinfo,
++      .get_link = ethtool_op_get_link,
++      .get_coalesce = be_get_coalesce,
++      .set_coalesce = be_set_coalesce,
++      .get_ringparam = be_get_ringparam,
++      .get_pauseparam = be_get_pauseparam,
++      .set_pauseparam = be_set_pauseparam,
++      .get_rx_csum = be_get_rx_csum,
++      .set_rx_csum = be_set_rx_csum,
++      .get_tx_csum = ethtool_op_get_tx_csum,
++      .set_tx_csum = ethtool_op_set_tx_csum,
++      .get_sg = ethtool_op_get_sg,
++      .set_sg = ethtool_op_set_sg,
++      .get_tso = ethtool_op_get_tso,
++      .set_tso = ethtool_op_set_tso,
++      .get_strings = be_get_strings,
++      .get_stats_count = be_get_stats_count,
++      .get_ethtool_stats = be_get_ethtool_stats,
++};
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_init.c linux-2.6.29-rc3.owrt/drivers/staging/benet/be_init.c
+--- linux-2.6.29.owrt/drivers/staging/benet/be_init.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_init.c      2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,1382 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include <linux/etherdevice.h>
++#include "benet.h"
++
++#define  DRVR_VERSION  "1.0.728"
++
++static const struct pci_device_id be_device_id_table[] = {
++      {PCI_DEVICE(0x19a2, 0x0201)},
++      {0}
++};
++
++MODULE_DEVICE_TABLE(pci, be_device_id_table);
++
++MODULE_VERSION(DRVR_VERSION);
++
++#define DRV_DESCRIPTION "ServerEngines BladeEngine Network Driver Version "
++
++MODULE_DESCRIPTION(DRV_DESCRIPTION DRVR_VERSION);
++MODULE_AUTHOR("ServerEngines");
++MODULE_LICENSE("GPL");
++
++static unsigned int msix = 1;
++module_param(msix, uint, S_IRUGO);
++MODULE_PARM_DESC(msix, "Use MSI-x interrupts");
++
++static unsigned int rxbuf_size = 2048;        /* Default RX frag size */
++module_param(rxbuf_size, uint, S_IRUGO);
++MODULE_PARM_DESC(rxbuf_size, "Size of buffers to hold Rx data");
++
++const char be_drvr_ver[] = DRVR_VERSION;
++char be_fw_ver[32];           /* F/W version filled in by be_probe */
++char be_driver_name[] = "benet";
++
++/*
++ * Number of entries in each queue.
++ */
++#define EVENT_Q_LEN           1024
++#define ETH_TXQ_LEN           2048
++#define ETH_TXCQ_LEN          1024
++#define ETH_RXQ_LEN           1024    /* Does not support any other value */
++#define ETH_UC_RXCQ_LEN               1024
++#define ETH_BC_RXCQ_LEN               256
++#define MCC_Q_LEN               64    /* total size not to exceed 8 pages */
++#define MCC_CQ_LEN              256
++
++/* Bit mask describing events of interest to be traced */
++unsigned int trace_level;
++
++static int
++init_pci_be_function(struct be_adapter *adapter, struct pci_dev *pdev)
++{
++      u64 pa;
++
++      /* CSR */
++      pa = pci_resource_start(pdev, 2);
++      adapter->csr_va = ioremap_nocache(pa, pci_resource_len(pdev, 2));
++      if (adapter->csr_va == NULL)
++              return -ENOMEM;
++
++      /* Door Bell */
++      pa = pci_resource_start(pdev, 4);
++      adapter->db_va = ioremap_nocache(pa, (128 * 1024));
++      if (adapter->db_va == NULL) {
++              iounmap(adapter->csr_va);
++              return -ENOMEM;
++      }
++
++      /* PCI */
++      pa = pci_resource_start(pdev, 1);
++      adapter->pci_va = ioremap_nocache(pa, pci_resource_len(pdev, 1));
++      if (adapter->pci_va == NULL) {
++              iounmap(adapter->csr_va);
++              iounmap(adapter->db_va);
++              return -ENOMEM;
++      }
++      return 0;
++}
++
++/*
++   This function enables the interrupt corresponding to the Event
++   queue ID for the given NetObject
++*/
++void be_enable_eq_intr(struct be_net_object *pnob)
++{
++      struct CQ_DB_AMAP cqdb;
++      cqdb.dw[0] = 0;
++      AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
++      AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 1);
++      AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
++      AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
++      PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
++}
++
++/*
++   This function disables the interrupt corresponding to the Event
++   queue ID for the given NetObject
++*/
++void be_disable_eq_intr(struct be_net_object *pnob)
++{
++      struct CQ_DB_AMAP cqdb;
++      cqdb.dw[0] = 0;
++      AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
++      AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 0);
++      AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
++      AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
++      PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
++}
++
++/*
++    This function enables the interrupt from the  network function
++    of the BladeEngine. Use the function be_disable_eq_intr()
++    to enable the interrupt from the event queue of only one specific
++    NetObject
++*/
++void be_enable_intr(struct be_net_object *pnob)
++{
++      struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
++      u32 host_intr;
++
++      ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
++      host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
++                                                      hostintr, ctrl.dw);
++      if (!host_intr) {
++              AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
++                      hostintr, ctrl.dw, 1);
++              PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
++                      ctrl.dw[0]);
++      }
++}
++
++/*
++   This function disables the interrupt from the network function of
++   the BladeEngine.  Use the function be_disable_eq_intr() to
++   disable the interrupt from the event queue of only one specific NetObject
++*/
++void be_disable_intr(struct be_net_object *pnob)
++{
++
++      struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
++      u32 host_intr;
++      ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
++      host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
++                                                      hostintr, ctrl.dw);
++      if (host_intr) {
++              AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR, hostintr,
++                      ctrl.dw, 0);
++              PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
++                      ctrl.dw[0]);
++      }
++}
++
++static int be_enable_msix(struct be_adapter *adapter)
++{
++      int i, ret;
++
++      if (!msix)
++              return -1;
++
++      for (i = 0; i < BE_MAX_REQ_MSIX_VECTORS; i++)
++              adapter->msix_entries[i].entry = i;
++
++      ret = pci_enable_msix(adapter->pdev, adapter->msix_entries,
++              BE_MAX_REQ_MSIX_VECTORS);
++
++      if (ret == 0)
++              adapter->msix_enabled = 1;
++      return ret;
++}
++
++static int be_register_isr(struct be_adapter *adapter,
++              struct be_net_object *pnob)
++{
++      struct net_device *netdev = pnob->netdev;
++      int intx = 0, r;
++
++      netdev->irq = adapter->pdev->irq;
++      r = be_enable_msix(adapter);
++
++      if (r == 0) {
++              r = request_irq(adapter->msix_entries[0].vector,
++                              be_int, IRQF_SHARED, netdev->name, netdev);
++              if (r) {
++                      printk(KERN_WARNING
++                              "MSIX Request IRQ failed - Errno %d\n", r);
++                      intx = 1;
++                      pci_disable_msix(adapter->pdev);
++                      adapter->msix_enabled = 0;
++              }
++      } else {
++              intx = 1;
++      }
++
++      if (intx) {
++              r = request_irq(netdev->irq, be_int, IRQF_SHARED,
++                              netdev->name, netdev);
++              if (r) {
++                      printk(KERN_WARNING
++                              "INTx Request IRQ failed - Errno %d\n", r);
++                      return -1;
++              }
++      }
++      adapter->isr_registered = 1;
++      return 0;
++}
++
++static void be_unregister_isr(struct be_adapter *adapter)
++{
++      struct net_device *netdev = adapter->netdevp;
++      if (adapter->isr_registered) {
++              if (adapter->msix_enabled) {
++                      free_irq(adapter->msix_entries[0].vector, netdev);
++                      pci_disable_msix(adapter->pdev);
++                      adapter->msix_enabled = 0;
++              } else {
++                      free_irq(netdev->irq, netdev);
++              }
++              adapter->isr_registered = 0;
++      }
++}
++
++/*
++    This function processes the Flush Completions that are issued by the
++    ARM F/W, when a Recv Ring is destroyed.  A flush completion is
++    identified when a Rx COmpl descriptor has the tcpcksum and udpcksum
++    set and the pktsize is 32.  These completions are received on the
++    Rx Completion Queue.
++*/
++static u32 be_process_rx_flush_cmpl(struct be_net_object *pnob)
++{
++      struct ETH_RX_COMPL_AMAP *rxcp;
++      unsigned int i = 0;
++      while ((rxcp = be_get_rx_cmpl(pnob)) != NULL) {
++              be_notify_cmpl(pnob, 1, pnob->rx_cq_id, 1);
++              i++;
++      }
++      return i;
++}
++
++static void be_tx_q_clean(struct be_net_object *pnob)
++{
++      while (atomic_read(&pnob->tx_q_used))
++              process_one_tx_compl(pnob, tx_compl_lastwrb_idx_get(pnob));
++}
++
++static void be_rx_q_clean(struct be_net_object *pnob)
++{
++      if (pnob->rx_ctxt) {
++              int i;
++              struct be_rx_page_info *rx_page_info;
++              for (i = 0; i < pnob->rx_q_len; i++) {
++                      rx_page_info = &(pnob->rx_page_info[i]);
++                      if (!pnob->rx_pg_shared || rx_page_info->page_offset) {
++                              pci_unmap_page(pnob->adapter->pdev,
++                                     pci_unmap_addr(rx_page_info, bus),
++                                             pnob->rx_buf_size,
++                                             PCI_DMA_FROMDEVICE);
++                      }
++                      if (rx_page_info->page)
++                              put_page(rx_page_info->page);
++                      memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              }
++              pnob->rx_pg_info_hd = 0;
++      }
++}
++
++static void be_destroy_netobj(struct be_net_object *pnob)
++{
++      int status;
++
++      if (pnob->tx_q_created) {
++              status = be_eth_sq_destroy(&pnob->tx_q_obj);
++              pnob->tx_q_created = 0;
++      }
++
++      if (pnob->rx_q_created) {
++              status = be_eth_rq_destroy(&pnob->rx_q_obj);
++              if (status != 0) {
++                      status = be_eth_rq_destroy_options(&pnob->rx_q_obj, 0,
++                                                    NULL, NULL);
++                      BUG_ON(status);
++              }
++              pnob->rx_q_created = 0;
++      }
++
++      be_process_rx_flush_cmpl(pnob);
++
++      if (pnob->tx_cq_created) {
++              status = be_cq_destroy(&pnob->tx_cq_obj);
++              pnob->tx_cq_created = 0;
++      }
++
++      if (pnob->rx_cq_created) {
++              status = be_cq_destroy(&pnob->rx_cq_obj);
++              pnob->rx_cq_created = 0;
++      }
++
++      if (pnob->mcc_q_created) {
++              status = be_mcc_ring_destroy(&pnob->mcc_q_obj);
++              pnob->mcc_q_created = 0;
++      }
++      if (pnob->mcc_cq_created) {
++              status = be_cq_destroy(&pnob->mcc_cq_obj);
++              pnob->mcc_cq_created = 0;
++      }
++
++      if (pnob->event_q_created) {
++              status = be_eq_destroy(&pnob->event_q_obj);
++              pnob->event_q_created = 0;
++      }
++      be_function_cleanup(&pnob->fn_obj);
++}
++
++/*
++ * free all resources associated with a pnob
++ * Called at the time of module cleanup as well a any error during
++ * module init.  Some resources may be partially allocated in a NetObj.
++ */
++static void netobject_cleanup(struct be_adapter *adapter,
++                      struct be_net_object *pnob)
++{
++      struct net_device *netdev = adapter->netdevp;
++
++      if (netif_running(netdev)) {
++              netif_stop_queue(netdev);
++              be_wait_nic_tx_cmplx_cmpl(pnob);
++              be_disable_eq_intr(pnob);
++      }
++
++      be_unregister_isr(adapter);
++
++      if (adapter->tasklet_started) {
++              tasklet_kill(&(adapter->sts_handler));
++              adapter->tasklet_started = 0;
++      }
++      if (pnob->fn_obj_created)
++              be_disable_intr(pnob);
++
++      if (adapter->dev_state != BE_DEV_STATE_NONE)
++              unregister_netdev(netdev);
++
++      if (pnob->fn_obj_created)
++              be_destroy_netobj(pnob);
++
++      adapter->net_obj = NULL;
++      adapter->netdevp = NULL;
++
++      be_rx_q_clean(pnob);
++      if (pnob->rx_ctxt) {
++              kfree(pnob->rx_page_info);
++              kfree(pnob->rx_ctxt);
++      }
++
++      be_tx_q_clean(pnob);
++      kfree(pnob->tx_ctxt);
++
++      if (pnob->mcc_q)
++              pci_free_consistent(adapter->pdev, pnob->mcc_q_size,
++                      pnob->mcc_q, pnob->mcc_q_bus);
++
++      if (pnob->mcc_wrb_ctxt)
++              free_pages((unsigned long)pnob->mcc_wrb_ctxt,
++                         get_order(pnob->mcc_wrb_ctxt_size));
++
++      if (pnob->mcc_cq)
++              pci_free_consistent(adapter->pdev, pnob->mcc_cq_size,
++                      pnob->mcc_cq, pnob->mcc_cq_bus);
++
++      if (pnob->event_q)
++              pci_free_consistent(adapter->pdev, pnob->event_q_size,
++                      pnob->event_q, pnob->event_q_bus);
++
++      if (pnob->tx_cq)
++              pci_free_consistent(adapter->pdev, pnob->tx_cq_size,
++                      pnob->tx_cq, pnob->tx_cq_bus);
++
++      if (pnob->tx_q)
++              pci_free_consistent(adapter->pdev, pnob->tx_q_size,
++                      pnob->tx_q, pnob->tx_q_bus);
++
++      if (pnob->rx_q)
++              pci_free_consistent(adapter->pdev, pnob->rx_q_size,
++                      pnob->rx_q, pnob->rx_q_bus);
++
++      if (pnob->rx_cq)
++              pci_free_consistent(adapter->pdev, pnob->rx_cq_size,
++                      pnob->rx_cq, pnob->rx_cq_bus);
++
++
++      if (pnob->mb_ptr)
++              pci_free_consistent(adapter->pdev, pnob->mb_size, pnob->mb_ptr,
++                      pnob->mb_bus);
++
++      free_netdev(netdev);
++}
++
++
++static int be_nob_ring_alloc(struct be_adapter *adapter,
++      struct be_net_object *pnob)
++{
++      u32 size;
++
++      /* Mail box rd; mailbox pointer needs to be 16 byte aligned */
++      pnob->mb_size = sizeof(struct MCC_MAILBOX_AMAP) + 16;
++      pnob->mb_ptr = pci_alloc_consistent(adapter->pdev, pnob->mb_size,
++                              &pnob->mb_bus);
++      if (!pnob->mb_bus)
++              return -1;
++      memset(pnob->mb_ptr, 0, pnob->mb_size);
++      pnob->mb_rd.va = PTR_ALIGN(pnob->mb_ptr, 16);
++      pnob->mb_rd.pa = PTR_ALIGN(pnob->mb_bus, 16);
++      pnob->mb_rd.length = sizeof(struct MCC_MAILBOX_AMAP);
++      /*
++       * Event queue
++       */
++      pnob->event_q_len = EVENT_Q_LEN;
++      pnob->event_q_size = pnob->event_q_len * sizeof(struct EQ_ENTRY_AMAP);
++      pnob->event_q = pci_alloc_consistent(adapter->pdev, pnob->event_q_size,
++                              &pnob->event_q_bus);
++      if (!pnob->event_q_bus)
++              return -1;
++      memset(pnob->event_q, 0, pnob->event_q_size);
++      /*
++       * Eth TX queue
++       */
++      pnob->tx_q_len = ETH_TXQ_LEN;
++      pnob->tx_q_port = 0;
++      pnob->tx_q_size =  pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP);
++      pnob->tx_q = pci_alloc_consistent(adapter->pdev, pnob->tx_q_size,
++                              &pnob->tx_q_bus);
++      if (!pnob->tx_q_bus)
++              return -1;
++      memset(pnob->tx_q, 0, pnob->tx_q_size);
++      /*
++       * Eth TX Compl queue
++       */
++      pnob->txcq_len = ETH_TXCQ_LEN;
++      pnob->tx_cq_size = pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP);
++      pnob->tx_cq = pci_alloc_consistent(adapter->pdev, pnob->tx_cq_size,
++                              &pnob->tx_cq_bus);
++      if (!pnob->tx_cq_bus)
++              return -1;
++      memset(pnob->tx_cq, 0, pnob->tx_cq_size);
++      /*
++       * Eth RX queue
++       */
++      pnob->rx_q_len = ETH_RXQ_LEN;
++      pnob->rx_q_size =  pnob->rx_q_len * sizeof(struct ETH_RX_D_AMAP);
++      pnob->rx_q = pci_alloc_consistent(adapter->pdev, pnob->rx_q_size,
++                              &pnob->rx_q_bus);
++      if (!pnob->rx_q_bus)
++              return -1;
++      memset(pnob->rx_q, 0, pnob->rx_q_size);
++      /*
++       * Eth Unicast RX Compl queue
++       */
++      pnob->rx_cq_len = ETH_UC_RXCQ_LEN;
++      pnob->rx_cq_size =  pnob->rx_cq_len *
++                      sizeof(struct ETH_RX_COMPL_AMAP);
++      pnob->rx_cq = pci_alloc_consistent(adapter->pdev, pnob->rx_cq_size,
++                              &pnob->rx_cq_bus);
++      if (!pnob->rx_cq_bus)
++              return -1;
++      memset(pnob->rx_cq, 0, pnob->rx_cq_size);
++
++      /* TX resources */
++      size = pnob->tx_q_len * sizeof(void **);
++      pnob->tx_ctxt = kzalloc(size, GFP_KERNEL);
++      if (pnob->tx_ctxt == NULL)
++              return -1;
++
++      /* RX resources */
++      size = pnob->rx_q_len * sizeof(void *);
++      pnob->rx_ctxt = kzalloc(size, GFP_KERNEL);
++      if (pnob->rx_ctxt == NULL)
++              return -1;
++
++      size = (pnob->rx_q_len * sizeof(struct be_rx_page_info));
++      pnob->rx_page_info = kzalloc(size, GFP_KERNEL);
++      if (pnob->rx_page_info == NULL)
++              return -1;
++
++      adapter->eth_statsp = kzalloc(sizeof(struct FWCMD_ETH_GET_STATISTICS),
++                              GFP_KERNEL);
++      if (adapter->eth_statsp == NULL)
++              return -1;
++      pnob->rx_buf_size = rxbuf_size;
++      return 0;
++}
++
++/*
++    This function initializes the be_net_object for subsequent
++    network operations.
++
++    Before calling this function, the driver  must have allocated
++    space for the NetObject structure, initialized the structure,
++    allocated DMAable memory for all the network queues that form
++    part of the NetObject and populated the start address (virtual)
++    and number of entries allocated for each queue in the NetObject structure.
++
++    The driver must also have allocated memory to hold the
++    mailbox structure (MCC_MAILBOX) and post the physical address,
++    virtual addresses and the size of the mailbox memory in the
++    NetObj.mb_rd.  This structure is used by BECLIB for
++    initial communication with the embedded MCC processor. BECLIB
++    uses the mailbox until MCC rings are created for  more  efficient
++    communication with the MCC processor.
++
++    If the driver wants to create multiple network interface for more
++    than one protection domain, it can call be_create_netobj()
++    multiple times  once for each protection domain.  A Maximum of
++    32 protection domains are supported.
++
++*/
++static int
++be_create_netobj(struct be_net_object *pnob, u8 __iomem *csr_va,
++      u8 __iomem *db_va, u8 __iomem *pci_va)
++{
++      int status = 0;
++      bool  eventable = false, tx_no_delay = false, rx_no_delay = false;
++      struct be_eq_object *eq_objectp = NULL;
++      struct be_function_object *pfob = &pnob->fn_obj;
++      struct ring_desc rd;
++      u32 set_rxbuf_size;
++      u32 tx_cmpl_wm = CEV_WMARK_96;  /* 0xffffffff to disable */
++      u32 rx_cmpl_wm = CEV_WMARK_160; /* 0xffffffff to disable */
++      u32 eq_delay = 0; /* delay in 8usec units. 0xffffffff to disable */
++
++      memset(&rd, 0, sizeof(struct ring_desc));
++
++      status = be_function_object_create(csr_va, db_va, pci_va,
++                      BE_FUNCTION_TYPE_NETWORK, &pnob->mb_rd, pfob);
++      if (status != BE_SUCCESS)
++              return status;
++      pnob->fn_obj_created = true;
++
++      if (tx_cmpl_wm == 0xffffffff)
++              tx_no_delay = true;
++      if (rx_cmpl_wm == 0xffffffff)
++              rx_no_delay = true;
++      /*
++       * now create the necessary rings
++       * Event Queue first.
++       */
++      if (pnob->event_q_len) {
++              rd.va = pnob->event_q;
++              rd.pa = pnob->event_q_bus;
++              rd.length = pnob->event_q_size;
++
++              status = be_eq_create(pfob, &rd, 4, pnob->event_q_len,
++                              (u32) -1,       /* CEV_WMARK_* or -1 */
++                              eq_delay,       /* in 8us units, or -1 */
++                              &pnob->event_q_obj);
++              if (status != BE_SUCCESS)
++                      goto error_ret;
++              pnob->event_q_id = pnob->event_q_obj.eq_id;
++              pnob->event_q_created = 1;
++              eventable = true;
++              eq_objectp = &pnob->event_q_obj;
++      }
++      /*
++       * Now Eth Tx Compl. queue.
++       */
++      if (pnob->txcq_len) {
++              rd.va = pnob->tx_cq;
++              rd.pa = pnob->tx_cq_bus;
++              rd.length = pnob->tx_cq_size;
++
++              status = be_cq_create(pfob, &rd,
++                      pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP),
++                      false,  /* solicted events,  */
++                      tx_no_delay,    /* nodelay  */
++                      tx_cmpl_wm,     /* Watermark encodings */
++                      eq_objectp, &pnob->tx_cq_obj);
++              if (status != BE_SUCCESS)
++                      goto error_ret;
++
++              pnob->tx_cq_id = pnob->tx_cq_obj.cq_id;
++              pnob->tx_cq_created = 1;
++      }
++      /*
++       * Eth Tx queue
++       */
++      if (pnob->tx_q_len) {
++              struct be_eth_sq_parameters ex_params = { 0 };
++              u32 type;
++
++              if (pnob->tx_q_port) {
++                      /* TXQ to be bound to a specific port */
++                      type = BE_ETH_TX_RING_TYPE_BOUND;
++                      ex_params.port = pnob->tx_q_port - 1;
++              } else
++                      type = BE_ETH_TX_RING_TYPE_STANDARD;
++
++              rd.va = pnob->tx_q;
++              rd.pa = pnob->tx_q_bus;
++              rd.length = pnob->tx_q_size;
++
++              status = be_eth_sq_create_ex(pfob, &rd,
++                              pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP),
++                              type, 2, &pnob->tx_cq_obj,
++                              &ex_params, &pnob->tx_q_obj);
++
++              if (status != BE_SUCCESS)
++                      goto error_ret;
++
++              pnob->tx_q_id = pnob->tx_q_obj.bid;
++              pnob->tx_q_created = 1;
++      }
++      /*
++       * Now Eth Rx compl. queue.  Always needed.
++       */
++      rd.va = pnob->rx_cq;
++      rd.pa = pnob->rx_cq_bus;
++      rd.length = pnob->rx_cq_size;
++
++      status = be_cq_create(pfob, &rd,
++                      pnob->rx_cq_len * sizeof(struct ETH_RX_COMPL_AMAP),
++                      false,  /* solicted events,  */
++                      rx_no_delay,    /* nodelay  */
++                      rx_cmpl_wm,     /* Watermark encodings */
++                      eq_objectp, &pnob->rx_cq_obj);
++      if (status != BE_SUCCESS)
++              goto error_ret;
++
++      pnob->rx_cq_id = pnob->rx_cq_obj.cq_id;
++      pnob->rx_cq_created = 1;
++
++      status = be_eth_rq_set_frag_size(pfob, pnob->rx_buf_size,
++                      (u32 *) &set_rxbuf_size);
++      if (status != BE_SUCCESS) {
++              be_eth_rq_get_frag_size(pfob, (u32 *) &pnob->rx_buf_size);
++              if ((pnob->rx_buf_size != 2048) && (pnob->rx_buf_size != 4096)
++                  && (pnob->rx_buf_size != 8192))
++                      goto error_ret;
++      } else {
++              if (pnob->rx_buf_size != set_rxbuf_size)
++                      pnob->rx_buf_size = set_rxbuf_size;
++      }
++      /*
++       * Eth RX queue. be_eth_rq_create() always assumes 2 pages size
++       */
++      rd.va = pnob->rx_q;
++      rd.pa = pnob->rx_q_bus;
++      rd.length = pnob->rx_q_size;
++
++      status = be_eth_rq_create(pfob, &rd, &pnob->rx_cq_obj,
++                           &pnob->rx_cq_obj, &pnob->rx_q_obj);
++
++      if (status != BE_SUCCESS)
++              goto error_ret;
++
++      pnob->rx_q_id = pnob->rx_q_obj.rid;
++      pnob->rx_q_created = 1;
++
++      return BE_SUCCESS;      /* All required queues created. */
++
++error_ret:
++      be_destroy_netobj(pnob);
++      return status;
++}
++
++static int be_nob_ring_init(struct be_adapter *adapter,
++                              struct be_net_object *pnob)
++{
++      int status;
++
++      pnob->event_q_tl = 0;
++
++      pnob->tx_q_hd = 0;
++      pnob->tx_q_tl = 0;
++
++      pnob->tx_cq_tl = 0;
++
++      pnob->rx_cq_tl = 0;
++
++      memset(pnob->event_q, 0, pnob->event_q_size);
++      memset(pnob->tx_cq, 0, pnob->tx_cq_size);
++      memset(pnob->tx_ctxt, 0, pnob->tx_q_len * sizeof(void **));
++      memset(pnob->rx_ctxt, 0, pnob->rx_q_len * sizeof(void *));
++      pnob->rx_pg_info_hd = 0;
++      pnob->rx_q_hd = 0;
++      atomic_set(&pnob->rx_q_posted, 0);
++
++      status = be_create_netobj(pnob, adapter->csr_va, adapter->db_va,
++                              adapter->pci_va);
++      if (status != BE_SUCCESS)
++              return -1;
++
++      be_post_eth_rx_buffs(pnob);
++      return 0;
++}
++
++/* This function handles async callback for link status */
++static void
++be_link_status_async_callback(void *context, u32 event_code, void *event)
++{
++      struct ASYNC_EVENT_LINK_STATE_AMAP *link_status = event;
++      struct be_adapter *adapter = context;
++      bool link_enable = false;
++      struct be_net_object *pnob;
++      struct ASYNC_EVENT_TRAILER_AMAP *async_trailer;
++      struct net_device *netdev;
++      u32 async_event_code, async_event_type, active_port;
++      u32 port0_link_status, port1_link_status, port0_duplex, port1_duplex;
++      u32 port0_speed, port1_speed;
++
++      if (event_code != ASYNC_EVENT_CODE_LINK_STATE) {
++              /* Not our event to handle */
++              return;
++      }
++      async_trailer = (struct ASYNC_EVENT_TRAILER_AMAP *)
++          ((u8 *) event + sizeof(struct MCC_CQ_ENTRY_AMAP) -
++           sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
++
++      async_event_code = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_code,
++                                           async_trailer);
++      BUG_ON(async_event_code != ASYNC_EVENT_CODE_LINK_STATE);
++
++      pnob = adapter->net_obj;
++      netdev = pnob->netdev;
++
++      /* Determine if this event is a switch VLD or a physical link event */
++      async_event_type = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_type,
++                                           async_trailer);
++      active_port = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                      active_port, link_status);
++      port0_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                            port0_link_status, link_status);
++      port1_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                            port1_link_status, link_status);
++      port0_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                       port0_duplex, link_status);
++      port1_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                       port1_duplex, link_status);
++      port0_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                      port0_speed, link_status);
++      port1_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
++                                      port1_speed, link_status);
++      if (async_event_type == NTWK_LINK_TYPE_VIRTUAL) {
++              adapter->be_stat.bes_link_change_virtual++;
++              if (adapter->be_link_sts->active_port != active_port) {
++                      dev_notice(&netdev->dev,
++                             "Active port changed due to VLD on switch\n");
++              } else {
++                      dev_notice(&netdev->dev, "Link status update\n");
++              }
++
++      } else {
++              adapter->be_stat.bes_link_change_physical++;
++              if (adapter->be_link_sts->active_port != active_port) {
++                      dev_notice(&netdev->dev,
++                             "Active port changed due to port link"
++                             " status change\n");
++              } else {
++                      dev_notice(&netdev->dev, "Link status update\n");
++              }
++      }
++
++      memset(adapter->be_link_sts, 0, sizeof(adapter->be_link_sts));
++
++      if ((port0_link_status == ASYNC_EVENT_LINK_UP) ||
++          (port1_link_status == ASYNC_EVENT_LINK_UP)) {
++              if ((adapter->port0_link_sts == BE_PORT_LINK_DOWN) &&
++                  (adapter->port1_link_sts == BE_PORT_LINK_DOWN)) {
++                      /* Earlier both the ports are down So link is up */
++                      link_enable = true;
++              }
++
++              if (port0_link_status == ASYNC_EVENT_LINK_UP) {
++                      adapter->port0_link_sts = BE_PORT_LINK_UP;
++                      adapter->be_link_sts->mac0_duplex = port0_duplex;
++                      adapter->be_link_sts->mac0_speed = port0_speed;
++                      if (active_port == NTWK_PORT_A)
++                              adapter->be_link_sts->active_port = 0;
++              } else
++                      adapter->port0_link_sts = BE_PORT_LINK_DOWN;
++
++              if (port1_link_status == ASYNC_EVENT_LINK_UP) {
++                      adapter->port1_link_sts = BE_PORT_LINK_UP;
++                      adapter->be_link_sts->mac1_duplex = port1_duplex;
++                      adapter->be_link_sts->mac1_speed = port1_speed;
++                      if (active_port == NTWK_PORT_B)
++                              adapter->be_link_sts->active_port = 1;
++              } else
++                      adapter->port1_link_sts = BE_PORT_LINK_DOWN;
++
++              printk(KERN_INFO "Link Properties for %s:\n", netdev->name);
++              dev_info(&netdev->dev, "Link Properties:\n");
++              be_print_link_info(adapter->be_link_sts);
++
++              if (!link_enable)
++                      return;
++              /*
++               * Both ports were down previously, but atleast one of
++               * them has come up if this netdevice's carrier is not up,
++               * then indicate to stack
++               */
++              if (!netif_carrier_ok(netdev)) {
++                      netif_start_queue(netdev);
++                      netif_carrier_on(netdev);
++              }
++              return;
++      }
++
++      /* Now both the ports are down. Tell the stack about it */
++      dev_info(&netdev->dev, "Both ports are down\n");
++      adapter->port0_link_sts = BE_PORT_LINK_DOWN;
++      adapter->port1_link_sts = BE_PORT_LINK_DOWN;
++      if (netif_carrier_ok(netdev)) {
++              netif_carrier_off(netdev);
++              netif_stop_queue(netdev);
++      }
++      return;
++}
++
++static int be_mcc_create(struct be_adapter *adapter)
++{
++      struct be_net_object *pnob;
++
++      pnob = adapter->net_obj;
++      /*
++       * Create the MCC ring so that all further communication with
++       * MCC can go thru the ring. we do this at the end since
++       * we do not want to be dealing with interrupts until the
++       * initialization is complete.
++       */
++      pnob->mcc_q_len = MCC_Q_LEN;
++      pnob->mcc_q_size = pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP);
++      pnob->mcc_q =  pci_alloc_consistent(adapter->pdev, pnob->mcc_q_size,
++                              &pnob->mcc_q_bus);
++      if (!pnob->mcc_q_bus)
++              return -1;
++      /*
++       * space for MCC WRB context
++       */
++      pnob->mcc_wrb_ctxtLen = MCC_Q_LEN;
++      pnob->mcc_wrb_ctxt_size =  pnob->mcc_wrb_ctxtLen *
++              sizeof(struct be_mcc_wrb_context);
++      pnob->mcc_wrb_ctxt = (void *)__get_free_pages(GFP_KERNEL,
++              get_order(pnob->mcc_wrb_ctxt_size));
++      if (pnob->mcc_wrb_ctxt == NULL)
++              return -1;
++      /*
++       * Space for MCC compl. ring
++       */
++      pnob->mcc_cq_len = MCC_CQ_LEN;
++      pnob->mcc_cq_size = pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP);
++      pnob->mcc_cq = pci_alloc_consistent(adapter->pdev, pnob->mcc_cq_size,
++                              &pnob->mcc_cq_bus);
++      if (!pnob->mcc_cq_bus)
++              return -1;
++      return 0;
++}
++
++/*
++    This function creates the MCC request and completion ring required
++    for communicating with the ARM processor.  The caller must have
++    allocated required amount of memory for the MCC ring and MCC
++    completion ring and posted the virtual address and number of
++    entries in the corresponding members (mcc_q and mcc_cq) in the
++    NetObject struture.
++
++    When this call is completed, all further communication with
++    ARM will switch from mailbox to this ring.
++
++    pnob      - Pointer to the NetObject structure. This NetObject should
++                have been created using a previous call to be_create_netobj()
++*/
++int be_create_mcc_rings(struct be_net_object *pnob)
++{
++      int status = 0;
++      struct ring_desc rd;
++      struct be_function_object *pfob = &pnob->fn_obj;
++
++      memset(&rd, 0, sizeof(struct ring_desc));
++      if (pnob->mcc_cq_len) {
++              rd.va = pnob->mcc_cq;
++              rd.pa = pnob->mcc_cq_bus;
++              rd.length = pnob->mcc_cq_size;
++
++              status = be_cq_create(pfob, &rd,
++                      pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP),
++                      false,  /* solicted events,  */
++                      true,   /* nodelay  */
++                      0,      /* 0 Watermark since Nodelay is true */
++                      &pnob->event_q_obj,
++                      &pnob->mcc_cq_obj);
++
++              if (status != BE_SUCCESS)
++                      return status;
++
++              pnob->mcc_cq_id = pnob->mcc_cq_obj.cq_id;
++              pnob->mcc_cq_created = 1;
++      }
++      if (pnob->mcc_q_len) {
++              rd.va = pnob->mcc_q;
++              rd.pa = pnob->mcc_q_bus;
++              rd.length = pnob->mcc_q_size;
++
++              status = be_mcc_ring_create(pfob, &rd,
++                              pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP),
++                              pnob->mcc_wrb_ctxt, pnob->mcc_wrb_ctxtLen,
++                              &pnob->mcc_cq_obj, &pnob->mcc_q_obj);
++
++              if (status != BE_SUCCESS)
++                      return status;
++
++              pnob->mcc_q_created = 1;
++      }
++      return BE_SUCCESS;
++}
++
++static int be_mcc_init(struct be_adapter *adapter)
++{
++      u32 r;
++      struct be_net_object *pnob;
++
++      pnob = adapter->net_obj;
++      memset(pnob->mcc_q, 0, pnob->mcc_q_size);
++      pnob->mcc_q_hd = 0;
++
++      memset(pnob->mcc_wrb_ctxt, 0, pnob->mcc_wrb_ctxt_size);
++
++      memset(pnob->mcc_cq, 0, pnob->mcc_cq_size);
++      pnob->mcc_cq_tl = 0;
++
++      r = be_create_mcc_rings(adapter->net_obj);
++      if (r != BE_SUCCESS)
++              return -1;
++
++      return 0;
++}
++
++static void be_remove(struct pci_dev *pdev)
++{
++      struct be_net_object *pnob;
++      struct be_adapter *adapter;
++
++      adapter = pci_get_drvdata(pdev);
++      if (!adapter)
++              return;
++
++      pci_set_drvdata(pdev, NULL);
++      pnob = (struct be_net_object *)adapter->net_obj;
++
++      flush_scheduled_work();
++
++      if (pnob) {
++              /* Unregister async callback function for link status updates */
++              if (pnob->mcc_q_created)
++                      be_mcc_add_async_event_callback(&pnob->mcc_q_obj,
++                                                              NULL, NULL);
++              netobject_cleanup(adapter, pnob);
++      }
++
++      if (adapter->csr_va)
++              iounmap(adapter->csr_va);
++      if (adapter->db_va)
++              iounmap(adapter->db_va);
++      if (adapter->pci_va)
++              iounmap(adapter->pci_va);
++
++      pci_release_regions(adapter->pdev);
++      pci_disable_device(adapter->pdev);
++
++      kfree(adapter->be_link_sts);
++      kfree(adapter->eth_statsp);
++
++      if (adapter->timer_ctxt.get_stats_timer.function)
++              del_timer_sync(&adapter->timer_ctxt.get_stats_timer);
++      kfree(adapter);
++}
++
++/*
++ * This function is called by the PCI sub-system when it finds a PCI
++ * device with dev/vendor IDs that match with one of our devices.
++ * All of the driver initialization is done in this function.
++ */
++static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
++{
++      int status = 0;
++      struct be_adapter *adapter;
++      struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD get_fwv;
++      struct be_net_object *pnob;
++      struct net_device *netdev;
++
++      status = pci_enable_device(pdev);
++      if (status)
++              goto error;
++
++      status = pci_request_regions(pdev, be_driver_name);
++      if (status)
++              goto error_pci_req;
++
++      pci_set_master(pdev);
++      adapter = kzalloc(sizeof(struct be_adapter), GFP_KERNEL);
++      if (adapter == NULL) {
++              status = -ENOMEM;
++              goto error_adapter;
++      }
++      adapter->dev_state = BE_DEV_STATE_NONE;
++      adapter->pdev = pdev;
++      pci_set_drvdata(pdev, adapter);
++
++      adapter->enable_aic = 1;
++      adapter->max_eqd = MAX_EQD;
++      adapter->min_eqd = 0;
++      adapter->cur_eqd = 0;
++
++      status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
++      if (!status) {
++              adapter->dma_64bit_cap = true;
++      } else {
++              adapter->dma_64bit_cap = false;
++              status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++              if (status != 0) {
++                      printk(KERN_ERR "Could not set PCI DMA Mask\n");
++                      goto cleanup;
++              }
++      }
++
++      status = init_pci_be_function(adapter, pdev);
++      if (status != 0) {
++              printk(KERN_ERR "Failed to map PCI BARS\n");
++              status = -ENOMEM;
++              goto cleanup;
++      }
++
++      be_trace_set_level(DL_ALWAYS | DL_ERR);
++
++      adapter->be_link_sts = kmalloc(sizeof(struct BE_LINK_STATUS),
++                                      GFP_KERNEL);
++      if (adapter->be_link_sts == NULL) {
++              printk(KERN_ERR "Memory allocation for link status "
++                     "buffer failed\n");
++              goto cleanup;
++      }
++      spin_lock_init(&adapter->txq_lock);
++
++      netdev = alloc_etherdev(sizeof(struct be_net_object));
++      if (netdev == NULL) {
++              status = -ENOMEM;
++              goto cleanup;
++      }
++      pnob = netdev_priv(netdev);
++      adapter->net_obj = pnob;
++      adapter->netdevp = netdev;
++      pnob->adapter = adapter;
++      pnob->netdev = netdev;
++
++      status = be_nob_ring_alloc(adapter, pnob);
++      if (status != 0)
++              goto cleanup;
++
++      status = be_nob_ring_init(adapter, pnob);
++      if (status != 0)
++              goto cleanup;
++
++      be_rxf_mac_address_read_write(&pnob->fn_obj, false, false, false,
++              false, false, netdev->dev_addr, NULL, NULL);
++
++      netdev->init = &benet_init;
++      netif_carrier_off(netdev);
++      netif_stop_queue(netdev);
++
++      SET_NETDEV_DEV(netdev, &(adapter->pdev->dev));
++
++      netif_napi_add(netdev, &pnob->napi, be_poll, 64);
++
++      /* if the rx_frag size if 2K, one page is shared as two RX frags */
++      pnob->rx_pg_shared =
++              (pnob->rx_buf_size <= PAGE_SIZE / 2) ? true : false;
++      if (pnob->rx_buf_size != rxbuf_size) {
++              printk(KERN_WARNING
++                     "Could not set Rx buffer size to %d. Using %d\n",
++                                     rxbuf_size, pnob->rx_buf_size);
++              rxbuf_size = pnob->rx_buf_size;
++      }
++
++      tasklet_init(&(adapter->sts_handler), be_process_intr,
++                   (unsigned long)adapter);
++      adapter->tasklet_started = 1;
++      spin_lock_init(&(adapter->int_lock));
++
++      status = be_register_isr(adapter, pnob);
++      if (status != 0)
++              goto cleanup;
++
++      adapter->rx_csum = 1;
++      adapter->max_rx_coal = BE_LRO_MAX_PKTS;
++
++      memset(&get_fwv, 0,
++             sizeof(struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD));
++      printk(KERN_INFO "BladeEngine Driver version:%s. "
++             "Copyright ServerEngines, Corporation 2005 - 2008\n",
++                             be_drvr_ver);
++      status = be_function_get_fw_version(&pnob->fn_obj, &get_fwv, NULL,
++                                          NULL);
++      if (status == BE_SUCCESS) {
++              strncpy(be_fw_ver, get_fwv.firmware_version_string, 32);
++              printk(KERN_INFO "BladeEngine Firmware Version:%s\n",
++                     get_fwv.firmware_version_string);
++      } else {
++              printk(KERN_WARNING "Unable to get BE Firmware Version\n");
++      }
++
++      sema_init(&adapter->get_eth_stat_sem, 0);
++      init_timer(&adapter->timer_ctxt.get_stats_timer);
++      atomic_set(&adapter->timer_ctxt.get_stat_flag, 0);
++      adapter->timer_ctxt.get_stats_timer.function =
++          &be_get_stats_timer_handler;
++
++      status = be_mcc_create(adapter);
++      if (status < 0)
++              goto cleanup;
++      status = be_mcc_init(adapter);
++      if (status < 0)
++              goto cleanup;
++
++
++      status = be_mcc_add_async_event_callback(&adapter->net_obj->mcc_q_obj,
++                       be_link_status_async_callback, (void *)adapter);
++      if (status != BE_SUCCESS) {
++              printk(KERN_WARNING "add_async_event_callback failed");
++              printk(KERN_WARNING
++                     "Link status changes may not be reflected\n");
++      }
++
++      status = register_netdev(netdev);
++      if (status != 0)
++              goto cleanup;
++      be_update_link_status(adapter);
++      adapter->dev_state = BE_DEV_STATE_INIT;
++      return 0;
++
++cleanup:
++      be_remove(pdev);
++      return status;
++error_adapter:
++      pci_release_regions(pdev);
++error_pci_req:
++      pci_disable_device(pdev);
++error:
++      printk(KERN_ERR "BladeEngine initalization failed\n");
++      return status;
++}
++
++/*
++ * Get the current link status and print the status on console
++ */
++void be_update_link_status(struct be_adapter *adapter)
++{
++      int status;
++      struct be_net_object *pnob = adapter->net_obj;
++
++      status = be_rxf_link_status(&pnob->fn_obj, adapter->be_link_sts, NULL,
++                      NULL, NULL);
++      if (status == BE_SUCCESS) {
++              if (adapter->be_link_sts->mac0_speed &&
++                  adapter->be_link_sts->mac0_duplex)
++                      adapter->port0_link_sts = BE_PORT_LINK_UP;
++              else
++                      adapter->port0_link_sts = BE_PORT_LINK_DOWN;
++
++              if (adapter->be_link_sts->mac1_speed &&
++                  adapter->be_link_sts->mac1_duplex)
++                      adapter->port1_link_sts = BE_PORT_LINK_UP;
++              else
++                      adapter->port1_link_sts = BE_PORT_LINK_DOWN;
++
++              dev_info(&pnob->netdev->dev, "Link Properties:\n");
++              be_print_link_info(adapter->be_link_sts);
++              return;
++      }
++      dev_info(&pnob->netdev->dev, "Could not get link status\n");
++      return;
++}
++
++
++#ifdef CONFIG_PM
++static void
++be_pm_cleanup(struct be_adapter *adapter,
++            struct be_net_object *pnob, struct net_device *netdev)
++{
++      netif_carrier_off(netdev);
++      netif_stop_queue(netdev);
++
++      be_wait_nic_tx_cmplx_cmpl(pnob);
++      be_disable_eq_intr(pnob);
++
++      if (adapter->tasklet_started) {
++              tasklet_kill(&adapter->sts_handler);
++              adapter->tasklet_started = 0;
++      }
++
++      be_unregister_isr(adapter);
++      be_disable_intr(pnob);
++
++      be_tx_q_clean(pnob);
++      be_rx_q_clean(pnob);
++
++      be_destroy_netobj(pnob);
++}
++
++static int be_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++      struct be_adapter *adapter = pci_get_drvdata(pdev);
++      struct net_device *netdev =  adapter->netdevp;
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      adapter->dev_pm_state = adapter->dev_state;
++      adapter->dev_state = BE_DEV_STATE_SUSPEND;
++
++      netif_device_detach(netdev);
++      if (netif_running(netdev))
++              be_pm_cleanup(adapter, pnob, netdev);
++
++      pci_enable_wake(pdev, 3, 1);
++      pci_enable_wake(pdev, 4, 1);    /* D3 Cold = 4 */
++      pci_save_state(pdev);
++      pci_disable_device(pdev);
++      pci_set_power_state(pdev, pci_choose_state(pdev, state));
++      return 0;
++}
++
++static void be_up(struct be_adapter *adapter)
++{
++      struct be_net_object *pnob = adapter->net_obj;
++
++      if (pnob->num_vlans != 0)
++              be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
++                      pnob->vlan_tag, NULL, NULL, NULL);
++
++}
++
++static int be_resume(struct pci_dev *pdev)
++{
++      int status = 0;
++      struct be_adapter *adapter = pci_get_drvdata(pdev);
++      struct net_device *netdev =  adapter->netdevp;
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      netif_device_detach(netdev);
++
++      status = pci_enable_device(pdev);
++      if (status)
++              return status;
++
++      pci_set_power_state(pdev, 0);
++      pci_restore_state(pdev);
++      pci_enable_wake(pdev, 3, 0);
++      pci_enable_wake(pdev, 4, 0);    /* 4 is D3 cold */
++
++      netif_carrier_on(netdev);
++      netif_start_queue(netdev);
++
++      if (netif_running(netdev)) {
++              be_rxf_mac_address_read_write(&pnob->fn_obj, false, false,
++                      false, true, false, netdev->dev_addr, NULL, NULL);
++
++              status = be_nob_ring_init(adapter, pnob);
++              if (status < 0)
++                      return status;
++
++              tasklet_init(&(adapter->sts_handler), be_process_intr,
++                           (unsigned long)adapter);
++              adapter->tasklet_started = 1;
++
++              if (be_register_isr(adapter, pnob) != 0) {
++                      printk(KERN_ERR "be_register_isr failed\n");
++                      return status;
++              }
++
++
++              status = be_mcc_init(adapter);
++              if (status < 0) {
++                      printk(KERN_ERR "be_mcc_init failed\n");
++                      return status;
++              }
++              be_update_link_status(adapter);
++              /*
++               * Register async call back function to handle link
++               * status updates
++               */
++              status = be_mcc_add_async_event_callback(
++                              &adapter->net_obj->mcc_q_obj,
++                              be_link_status_async_callback, (void *)adapter);
++              if (status != BE_SUCCESS) {
++                      printk(KERN_WARNING "add_async_event_callback failed");
++                      printk(KERN_WARNING
++                             "Link status changes may not be reflected\n");
++              }
++              be_enable_intr(pnob);
++              be_enable_eq_intr(pnob);
++              be_up(adapter);
++      }
++      netif_device_attach(netdev);
++      adapter->dev_state = adapter->dev_pm_state;
++      return 0;
++
++}
++
++#endif
++
++/* Wait until no more pending transmits  */
++void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *pnob)
++{
++      int i;
++
++      /* Wait for 20us * 50000 (= 1s) and no more */
++      i = 0;
++      while ((pnob->tx_q_tl != pnob->tx_q_hd) && (i < 50000)) {
++              ++i;
++              udelay(20);
++      }
++
++      /* Check for no more pending transmits */
++      if (i >= 50000) {
++              printk(KERN_WARNING
++                     "Did not receive completions for all TX requests\n");
++      }
++}
++
++static struct pci_driver be_driver = {
++      .name = be_driver_name,
++      .id_table = be_device_id_table,
++      .probe = be_probe,
++#ifdef CONFIG_PM
++      .suspend = be_suspend,
++      .resume = be_resume,
++#endif
++      .remove = be_remove
++};
++
++/*
++ * Module init entry point. Registers our our device and return.
++ * Our probe will be called if the device is found.
++ */
++static int __init be_init_module(void)
++{
++      int ret;
++
++      if (rxbuf_size != 8192 && rxbuf_size != 4096 && rxbuf_size != 2048) {
++              printk(KERN_WARNING
++                     "Unsupported receive buffer size (%d) requested\n",
++                     rxbuf_size);
++              printk(KERN_WARNING
++                     "Must be 2048, 4096 or 8192. Defaulting to 2048\n");
++              rxbuf_size = 2048;
++      }
++
++      ret = pci_register_driver(&be_driver);
++
++      return ret;
++}
++
++module_init(be_init_module);
++
++/*
++ * be_exit_module - Driver Exit Cleanup Routine
++ */
++static void __exit be_exit_module(void)
++{
++      pci_unregister_driver(&be_driver);
++}
++
++module_exit(be_exit_module);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_int.c linux-2.6.29-rc3.owrt/drivers/staging/benet/be_int.c
+--- linux-2.6.29.owrt/drivers/staging/benet/be_int.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_int.c       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,863 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include <linux/if_vlan.h>
++#include <linux/inet_lro.h>
++
++#include "benet.h"
++
++/* number of bytes of RX frame that are copied to skb->data */
++#define BE_HDR_LEN 64
++
++#define NETIF_RX(skb) netif_receive_skb(skb)
++#define VLAN_ACCEL_RX(skb, pnob, vt) \
++              vlan_hwaccel_rx(skb, pnob->vlan_grp, vt)
++
++/*
++    This function notifies BladeEngine of the number of completion
++    entries processed from the specified completion queue by writing
++    the number of popped entries to the door bell.
++
++    pnob      - Pointer to the NetObject structure
++    n         - Number of completion entries processed
++    cq_id     - Queue ID of the completion queue for which notification
++                      is being done.
++    re_arm    - 1  - rearm the completion ring to generate an event.
++              - 0  - dont rearm the completion ring to generate an event
++*/
++void be_notify_cmpl(struct be_net_object *pnob, int n, int cq_id, int re_arm)
++{
++      struct CQ_DB_AMAP cqdb;
++
++      cqdb.dw[0] = 0;
++      AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, cq_id);
++      AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, re_arm);
++      AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, n);
++      PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
++}
++
++/*
++ * adds additional receive frags indicated by BE starting from given
++ * frag index (fi) to specified skb's frag list
++ */
++static void
++add_skb_frags(struct be_net_object *pnob, struct sk_buff *skb,
++            u32 nresid, u32 fi)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      u32 sk_frag_idx, n;
++      struct be_rx_page_info *rx_page_info;
++      u32 frag_sz = pnob->rx_buf_size;
++
++      sk_frag_idx = skb_shinfo(skb)->nr_frags;
++      while (nresid) {
++              index_inc(&fi, pnob->rx_q_len);
++
++              rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
++              pnob->rx_ctxt[fi] = NULL;
++              if ((rx_page_info->page_offset) ||
++                  (pnob->rx_pg_shared == false)) {
++                      pci_unmap_page(adapter->pdev,
++                                     pci_unmap_addr(rx_page_info, bus),
++                                     frag_sz, PCI_DMA_FROMDEVICE);
++              }
++
++              n = min(nresid, frag_sz);
++              skb_shinfo(skb)->frags[sk_frag_idx].page = rx_page_info->page;
++              skb_shinfo(skb)->frags[sk_frag_idx].page_offset
++                  = rx_page_info->page_offset;
++              skb_shinfo(skb)->frags[sk_frag_idx].size = n;
++
++              sk_frag_idx++;
++              skb->len += n;
++              skb->data_len += n;
++              skb_shinfo(skb)->nr_frags++;
++              nresid -= n;
++
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              atomic_dec(&pnob->rx_q_posted);
++      }
++}
++
++/*
++ * This function processes incoming nic packets over various Rx queues.
++ * This function takes the adapter, the current Rx status descriptor
++ * entry and the Rx completion queue ID as argument.
++ */
++static inline int process_nic_rx_completion(struct be_net_object *pnob,
++                                          struct ETH_RX_COMPL_AMAP *rxcp)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      struct sk_buff *skb;
++      int udpcksm, tcpcksm;
++      int n;
++      u32 nresid, fi;
++      u32 frag_sz = pnob->rx_buf_size;
++      u8 *va;
++      struct be_rx_page_info *rx_page_info;
++      u32 numfrags, vtp, vtm, vlan_tag, pktsize;
++
++      fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
++      BUG_ON(fi >= (int)pnob->rx_q_len);
++      BUG_ON(fi < 0);
++
++      rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
++      BUG_ON(!rx_page_info->page);
++      pnob->rx_ctxt[fi] = NULL;
++
++      /*
++       * If one page is used per fragment or if this is the second half of
++       *  of the page, unmap the page here
++       */
++      if ((rx_page_info->page_offset) || (pnob->rx_pg_shared == false)) {
++              pci_unmap_page(adapter->pdev,
++                             pci_unmap_addr(rx_page_info, bus), frag_sz,
++                             PCI_DMA_FROMDEVICE);
++      }
++
++      atomic_dec(&pnob->rx_q_posted);
++      udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
++      tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
++      pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
++      /*
++       * get rid of RX flush completions first.
++       */
++      if ((tcpcksm) && (udpcksm) && (pktsize == 32)) {
++              put_page(rx_page_info->page);
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              return 0;
++      }
++      skb = netdev_alloc_skb(pnob->netdev, BE_HDR_LEN + NET_IP_ALIGN);
++      if (skb == NULL) {
++              dev_info(&pnob->netdev->dev, "alloc_skb() failed\n");
++              put_page(rx_page_info->page);
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              goto free_frags;
++      }
++      skb_reserve(skb, NET_IP_ALIGN);
++
++      skb->dev = pnob->netdev;
++
++      n = min(pktsize, frag_sz);
++
++      va = page_address(rx_page_info->page) + rx_page_info->page_offset;
++      prefetch(va);
++
++      skb->len = n;
++      skb->data_len = n;
++      if (n <= BE_HDR_LEN) {
++              memcpy(skb->data, va, n);
++              put_page(rx_page_info->page);
++              skb->data_len -= n;
++              skb->tail += n;
++      } else {
++
++              /* Setup the SKB with page buffer information */
++              skb_shinfo(skb)->frags[0].page = rx_page_info->page;
++              skb_shinfo(skb)->nr_frags++;
++
++              /* Copy the header into the skb_data */
++              memcpy(skb->data, va, BE_HDR_LEN);
++              skb_shinfo(skb)->frags[0].page_offset =
++                  rx_page_info->page_offset + BE_HDR_LEN;
++              skb_shinfo(skb)->frags[0].size = n - BE_HDR_LEN;
++              skb->data_len -= BE_HDR_LEN;
++              skb->tail += BE_HDR_LEN;
++      }
++      memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++      nresid = pktsize - n;
++
++      skb->protocol = eth_type_trans(skb, pnob->netdev);
++
++      if ((tcpcksm || udpcksm) && adapter->rx_csum)
++              skb->ip_summed = CHECKSUM_UNNECESSARY;
++      else
++              skb->ip_summed = CHECKSUM_NONE;
++      /*
++       * if we have more bytes left, the frame has been
++       * given to us in multiple fragments.  This happens
++       * with Jumbo frames. Add the remaining fragments to
++       * skb->frags[] array.
++       */
++      if (nresid)
++              add_skb_frags(pnob, skb, nresid, fi);
++
++      /* update the the true size of the skb. */
++      skb->truesize = skb->len + sizeof(struct sk_buff);
++
++      /*
++       * If a 802.3 frame or 802.2 LLC frame
++       * (i.e) contains length field in MAC Hdr
++       * and frame len is greater than 64 bytes
++       */
++      if (((skb->protocol == ntohs(ETH_P_802_2)) ||
++           (skb->protocol == ntohs(ETH_P_802_3)))
++          && (pktsize > BE_HDR_LEN)) {
++              /*
++               * If the length given in Mac Hdr is less than frame size
++               * Erraneous frame, Drop it
++               */
++              if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) < pktsize) {
++                      /* Increment Non Ether type II frames dropped */
++                      adapter->be_stat.bes_802_3_dropped_frames++;
++
++                      kfree_skb(skb);
++                      return 0;
++              }
++              /*
++               * else if the length given in Mac Hdr is greater than
++               * frame size, should not be seeing this sort of frames
++               * dump the pkt and pass to stack
++               */
++              else if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) > pktsize) {
++                      /* Increment Non Ether type II frames malformed */
++                      adapter->be_stat.bes_802_3_malformed_frames++;
++              }
++      }
++
++      vtp = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
++      vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
++      if (vtp && vtm) {
++              /* Vlan tag present in pkt and BE found
++               * that the tag matched an entry in VLAN table
++               */
++              if (!pnob->vlan_grp || pnob->num_vlans == 0) {
++                      /* But we have no VLANs configured.
++                       * This should never happen.  Drop the packet.
++                       */
++                      dev_info(&pnob->netdev->dev,
++                             "BladeEngine: Unexpected vlan tagged packet\n");
++                      kfree_skb(skb);
++                      return 0;
++              }
++              /* pass the VLAN packet to stack */
++              vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
++              VLAN_ACCEL_RX(skb, pnob, be16_to_cpu(vlan_tag));
++
++      } else {
++              NETIF_RX(skb);
++      }
++      return 0;
++
++free_frags:
++      /* free all frags associated with the current rxcp */
++      numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
++      while (numfrags-- > 1) {
++              index_inc(&fi, pnob->rx_q_len);
++
++              rx_page_info = (struct be_rx_page_info *)
++                  pnob->rx_ctxt[fi];
++              pnob->rx_ctxt[fi] = (void *)NULL;
++              if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
++                      pci_unmap_page(adapter->pdev,
++                                     pci_unmap_addr(rx_page_info, bus),
++                                     frag_sz, PCI_DMA_FROMDEVICE);
++              }
++
++              put_page(rx_page_info->page);
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              atomic_dec(&pnob->rx_q_posted);
++      }
++      return -ENOMEM;
++}
++
++static void process_nic_rx_completion_lro(struct be_net_object *pnob,
++                                        struct ETH_RX_COMPL_AMAP *rxcp)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
++      unsigned int udpcksm, tcpcksm;
++      u32 numfrags, vlanf, vtm, vlan_tag, nresid;
++      u16 vlant;
++      unsigned int fi, idx, n;
++      struct be_rx_page_info *rx_page_info;
++      u32 frag_sz = pnob->rx_buf_size, pktsize;
++      bool rx_coal = (adapter->max_rx_coal <= 1) ? 0 : 1;
++      u8 err, *va;
++      __wsum csum = 0;
++
++      if (AMAP_GET_BITS_PTR(ETH_RX_COMPL, ipsec, rxcp)) {
++              /*  Drop the pkt and move to the next completion.  */
++              adapter->be_stat.bes_rx_misc_pkts++;
++              return;
++      }
++      err = AMAP_GET_BITS_PTR(ETH_RX_COMPL, err, rxcp);
++      if (err || !rx_coal) {
++              /* We won't coalesce Rx pkts if the err bit set.
++               * take the path of normal completion processing */
++              process_nic_rx_completion(pnob, rxcp);
++              return;
++      }
++
++      fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
++      BUG_ON(fi >= (int)pnob->rx_q_len);
++      BUG_ON(fi < 0);
++      rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
++      BUG_ON(!rx_page_info->page);
++      pnob->rx_ctxt[fi] = (void *)NULL;
++      /*  If one page is used per fragment or if this is the
++       * second half of the page, unmap the page here
++       */
++      if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
++              pci_unmap_page(adapter->pdev,
++                             pci_unmap_addr(rx_page_info, bus),
++                             frag_sz, PCI_DMA_FROMDEVICE);
++      }
++
++      numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
++      udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
++      tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
++      vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
++      vlant = be16_to_cpu(vlan_tag);
++      vlanf = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
++      vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
++      pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
++
++      atomic_dec(&pnob->rx_q_posted);
++
++      if (tcpcksm && udpcksm && pktsize == 32) {
++              /* flush completion entries */
++              put_page(rx_page_info->page);
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              return;
++      }
++      /* Only one of udpcksum and tcpcksum can be set */
++      BUG_ON(udpcksm && tcpcksm);
++
++      /* jumbo frames could come in multiple fragments */
++      BUG_ON(numfrags != ((pktsize + (frag_sz - 1)) / frag_sz));
++      n = min(pktsize, frag_sz);
++      nresid = pktsize - n;   /* will be useful for jumbo pkts */
++      idx = 0;
++
++      va = page_address(rx_page_info->page) + rx_page_info->page_offset;
++      prefetch(va);
++      rx_frags[idx].page = rx_page_info->page;
++      rx_frags[idx].page_offset = (rx_page_info->page_offset);
++      rx_frags[idx].size = n;
++      memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++
++      /* If we got multiple fragments, we have more data. */
++      while (nresid) {
++              idx++;
++              index_inc(&fi, pnob->rx_q_len);
++
++              rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
++              pnob->rx_ctxt[fi] = (void *)NULL;
++              if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
++                      pci_unmap_page(adapter->pdev,
++                                     pci_unmap_addr(rx_page_info, bus),
++                                     frag_sz, PCI_DMA_FROMDEVICE);
++              }
++
++              n = min(nresid, frag_sz);
++              rx_frags[idx].page = rx_page_info->page;
++              rx_frags[idx].page_offset = (rx_page_info->page_offset);
++              rx_frags[idx].size = n;
++
++              nresid -= n;
++              memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
++              atomic_dec(&pnob->rx_q_posted);
++      }
++
++      if (likely(!(vlanf && vtm))) {
++              lro_receive_frags(&pnob->lro_mgr, rx_frags,
++                                pktsize, pktsize,
++                                (void *)(unsigned long)csum, csum);
++      } else {
++              /* Vlan tag present in pkt and BE found
++               * that the tag matched an entry in VLAN table
++               */
++              if (unlikely(!pnob->vlan_grp || pnob->num_vlans == 0)) {
++                      /* But we have no VLANs configured.
++                       * This should never happen.  Drop the packet.
++                       */
++                      dev_info(&pnob->netdev->dev,
++                             "BladeEngine: Unexpected vlan tagged packet\n");
++                      return;
++              }
++              /* pass the VLAN packet to stack */
++              lro_vlan_hwaccel_receive_frags(&pnob->lro_mgr,
++                                             rx_frags, pktsize, pktsize,
++                                             pnob->vlan_grp, vlant,
++                                             (void *)(unsigned long)csum,
++                                             csum);
++      }
++
++      adapter->be_stat.bes_rx_coal++;
++}
++
++struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *pnob)
++{
++      struct ETH_RX_COMPL_AMAP *rxcp = &pnob->rx_cq[pnob->rx_cq_tl];
++      u32 valid, ct;
++
++      valid = AMAP_GET_BITS_PTR(ETH_RX_COMPL, valid, rxcp);
++      if (valid == 0)
++              return NULL;
++
++      ct = AMAP_GET_BITS_PTR(ETH_RX_COMPL, ct, rxcp);
++      if (ct != 0) {
++              /* Invalid chute #. treat as error */
++              AMAP_SET_BITS_PTR(ETH_RX_COMPL, err, rxcp, 1);
++      }
++
++      be_adv_rxcq_tl(pnob);
++      AMAP_SET_BITS_PTR(ETH_RX_COMPL, valid, rxcp, 0);
++      return rxcp;
++}
++
++static void update_rx_rate(struct be_adapter *adapter)
++{
++      /* update the rate once in two seconds */
++      if ((jiffies - adapter->eth_rx_jiffies) > 2 * (HZ)) {
++              u32 r;
++              r = adapter->eth_rx_bytes /
++                  ((jiffies - adapter->eth_rx_jiffies) / (HZ));
++              r = (r / 1000000);      /* MB/Sec */
++
++              /* Mega Bits/Sec */
++              adapter->be_stat.bes_eth_rx_rate = (r * 8);
++              adapter->eth_rx_jiffies = jiffies;
++              adapter->eth_rx_bytes = 0;
++      }
++}
++
++static int process_rx_completions(struct be_net_object *pnob, int max_work)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      struct ETH_RX_COMPL_AMAP *rxcp;
++      u32 nc = 0;
++      unsigned int pktsize;
++
++      while (max_work && (rxcp = be_get_rx_cmpl(pnob))) {
++              prefetch(rxcp);
++              pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
++              process_nic_rx_completion_lro(pnob, rxcp);
++              adapter->eth_rx_bytes += pktsize;
++              update_rx_rate(adapter);
++              nc++;
++              max_work--;
++              adapter->be_stat.bes_rx_compl++;
++      }
++      if (likely(adapter->max_rx_coal > 1)) {
++              adapter->be_stat.bes_rx_flush++;
++              lro_flush_all(&pnob->lro_mgr);
++      }
++
++      /* Refill the queue */
++      if (atomic_read(&pnob->rx_q_posted) < 900)
++              be_post_eth_rx_buffs(pnob);
++
++      return nc;
++}
++
++static struct ETH_TX_COMPL_AMAP *be_get_tx_cmpl(struct be_net_object *pnob)
++{
++      struct ETH_TX_COMPL_AMAP *txcp = &pnob->tx_cq[pnob->tx_cq_tl];
++      u32 valid;
++
++      valid = AMAP_GET_BITS_PTR(ETH_TX_COMPL, valid, txcp);
++      if (valid == 0)
++              return NULL;
++
++      AMAP_SET_BITS_PTR(ETH_TX_COMPL, valid, txcp, 0);
++      be_adv_txcq_tl(pnob);
++      return txcp;
++
++}
++
++void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      int cur_index, tx_wrbs_completed = 0;
++      struct sk_buff *skb;
++      u64 busaddr, pa, pa_lo, pa_hi;
++      struct ETH_WRB_AMAP *wrb;
++      u32 frag_len, last_index, j;
++
++      last_index = tx_compl_lastwrb_idx_get(pnob);
++      BUG_ON(last_index != end_idx);
++      pnob->tx_ctxt[pnob->tx_q_tl] = NULL;
++      do {
++              cur_index = pnob->tx_q_tl;
++              wrb = &pnob->tx_q[cur_index];
++              pa_hi = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb);
++              pa_lo = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb);
++              frag_len = AMAP_GET_BITS_PTR(ETH_WRB, frag_len, wrb);
++              busaddr = (pa_hi << 32) | pa_lo;
++              if (busaddr != 0) {
++                      pa = le64_to_cpu(busaddr);
++                      pci_unmap_single(adapter->pdev, pa,
++                                       frag_len, PCI_DMA_TODEVICE);
++              }
++              if (cur_index == last_index) {
++                      skb = (struct sk_buff *)pnob->tx_ctxt[cur_index];
++                      BUG_ON(!skb);
++                      for (j = 0; j < skb_shinfo(skb)->nr_frags; j++) {
++                              struct skb_frag_struct *frag;
++                              frag = &skb_shinfo(skb)->frags[j];
++                              pci_unmap_page(adapter->pdev,
++                                             (ulong) frag->page, frag->size,
++                                             PCI_DMA_TODEVICE);
++                      }
++                      kfree_skb(skb);
++                      pnob->tx_ctxt[cur_index] = NULL;
++              } else {
++                      BUG_ON(pnob->tx_ctxt[cur_index]);
++              }
++              tx_wrbs_completed++;
++              be_adv_txq_tl(pnob);
++      } while (cur_index != last_index);
++      atomic_sub(tx_wrbs_completed, &pnob->tx_q_used);
++}
++
++/* there is no need to take an SMP lock here since currently
++ * we have only one instance of the tasklet that does completion
++ * processing.
++ */
++static void process_nic_tx_completions(struct be_net_object *pnob)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      struct ETH_TX_COMPL_AMAP *txcp;
++      struct net_device *netdev = pnob->netdev;
++      u32 end_idx, num_processed = 0;
++
++      adapter->be_stat.bes_tx_events++;
++
++      while ((txcp = be_get_tx_cmpl(pnob))) {
++              end_idx = AMAP_GET_BITS_PTR(ETH_TX_COMPL, wrb_index, txcp);
++              process_one_tx_compl(pnob, end_idx);
++              num_processed++;
++              adapter->be_stat.bes_tx_compl++;
++      }
++      be_notify_cmpl(pnob, num_processed, pnob->tx_cq_id, 1);
++      /*
++       * We got Tx completions and have usable WRBs.
++       * If the netdev's queue has been stopped
++       * because we had run out of WRBs, wake it now.
++       */
++      spin_lock(&adapter->txq_lock);
++      if (netif_queue_stopped(netdev)
++          && atomic_read(&pnob->tx_q_used) < pnob->tx_q_len / 2) {
++              netif_wake_queue(netdev);
++      }
++      spin_unlock(&adapter->txq_lock);
++}
++
++static u32 post_rx_buffs(struct be_net_object *pnob, struct list_head *rxbl)
++{
++      u32 nposted = 0;
++      struct ETH_RX_D_AMAP *rxd = NULL;
++      struct be_recv_buffer *rxbp;
++      void **rx_ctxp;
++      struct RQ_DB_AMAP rqdb;
++
++      rx_ctxp = pnob->rx_ctxt;
++
++      while (!list_empty(rxbl) &&
++             (rx_ctxp[pnob->rx_q_hd] == NULL) && nposted < 255) {
++
++              rxbp = list_first_entry(rxbl, struct be_recv_buffer, rxb_list);
++              list_del(&rxbp->rxb_list);
++              rxd = pnob->rx_q + pnob->rx_q_hd;
++              AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_lo, rxd, rxbp->rxb_pa_lo);
++              AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_hi, rxd, rxbp->rxb_pa_hi);
++
++              rx_ctxp[pnob->rx_q_hd] = rxbp->rxb_ctxt;
++              be_adv_rxq_hd(pnob);
++              nposted++;
++      }
++
++      if (nposted) {
++              /* Now press the door bell to notify BladeEngine. */
++              rqdb.dw[0] = 0;
++              AMAP_SET_BITS_PTR(RQ_DB, numPosted, &rqdb, nposted);
++              AMAP_SET_BITS_PTR(RQ_DB, rq, &rqdb, pnob->rx_q_id);
++              PD_WRITE(&pnob->fn_obj, erx_rq_db, rqdb.dw[0]);
++      }
++      atomic_add(nposted, &pnob->rx_q_posted);
++      return nposted;
++}
++
++void be_post_eth_rx_buffs(struct be_net_object *pnob)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      u32 num_bufs, r;
++      u64 busaddr = 0, tmp_pa;
++      u32 max_bufs, pg_hd;
++      u32 frag_size;
++      struct be_recv_buffer *rxbp;
++      struct list_head rxbl;
++      struct be_rx_page_info *rx_page_info;
++      struct page *page = NULL;
++      u32 page_order = 0;
++      gfp_t alloc_flags = GFP_ATOMIC;
++
++      BUG_ON(!adapter);
++
++      max_bufs = 64;          /* should be even # <= 255. */
++
++      frag_size = pnob->rx_buf_size;
++      page_order = get_order(frag_size);
++
++      if (frag_size == 8192)
++              alloc_flags |= (gfp_t) __GFP_COMP;
++      /*
++       * Form a linked list of RECV_BUFFFER structure to be be posted.
++       * We will post even number of buffer so that pages can be
++       * shared.
++       */
++      INIT_LIST_HEAD(&rxbl);
++
++      for (num_bufs = 0; num_bufs < max_bufs &&
++              !pnob->rx_page_info[pnob->rx_pg_info_hd].page; ++num_bufs) {
++
++              rxbp = &pnob->eth_rx_bufs[num_bufs];
++              pg_hd = pnob->rx_pg_info_hd;
++              rx_page_info = &pnob->rx_page_info[pg_hd];
++
++              if (!page) {
++                      page = alloc_pages(alloc_flags, page_order);
++                      if (unlikely(page == NULL)) {
++                              adapter->be_stat.bes_ethrx_post_fail++;
++                              pnob->rxbuf_post_fail++;
++                              break;
++                      }
++                      pnob->rxbuf_post_fail = 0;
++                      busaddr = pci_map_page(adapter->pdev, page, 0,
++                                             frag_size, PCI_DMA_FROMDEVICE);
++                      rx_page_info->page_offset = 0;
++                      rx_page_info->page = page;
++                      /*
++                       * If we are sharing a page among two skbs,
++                       * alloc a new one on the next iteration
++                       */
++                      if (pnob->rx_pg_shared == false)
++                              page = NULL;
++              } else {
++                      get_page(page);
++                      rx_page_info->page_offset += frag_size;
++                      rx_page_info->page = page;
++                      /*
++                       * We are finished with the alloced page,
++                       * Alloc a new one on the next iteration
++                       */
++                      page = NULL;
++              }
++              rxbp->rxb_ctxt = (void *)rx_page_info;
++              index_inc(&pnob->rx_pg_info_hd, pnob->rx_q_len);
++
++              pci_unmap_addr_set(rx_page_info, bus, busaddr);
++              tmp_pa = busaddr + rx_page_info->page_offset;
++              rxbp->rxb_pa_lo = (tmp_pa & 0xFFFFFFFF);
++              rxbp->rxb_pa_hi = (tmp_pa >> 32);
++              rxbp->rxb_len = frag_size;
++              list_add_tail(&rxbp->rxb_list, &rxbl);
++      }                       /* End of for */
++
++      r = post_rx_buffs(pnob, &rxbl);
++      BUG_ON(r != num_bufs);
++      return;
++}
++
++/*
++ * Interrupt service for network function.  We just schedule the
++ * tasklet which does all completion processing.
++ */
++irqreturn_t be_int(int irq, void *dev)
++{
++      struct net_device *netdev = dev;
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      u32 isr;
++
++      isr = CSR_READ(&pnob->fn_obj, cev.isr1);
++      if (unlikely(!isr))
++              return IRQ_NONE;
++
++      spin_lock(&adapter->int_lock);
++      adapter->isr |= isr;
++      spin_unlock(&adapter->int_lock);
++
++      adapter->be_stat.bes_ints++;
++
++      tasklet_schedule(&adapter->sts_handler);
++      return IRQ_HANDLED;
++}
++
++/*
++ * Poll function called by NAPI with a work budget.
++ * We process as many UC. BC and MC receive completions
++ * as the budget allows and return the actual number of
++ * RX ststutses processed.
++ */
++int be_poll(struct napi_struct *napi, int budget)
++{
++      struct be_net_object *pnob =
++                      container_of(napi, struct be_net_object, napi);
++      u32 work_done;
++
++      pnob->adapter->be_stat.bes_polls++;
++      work_done = process_rx_completions(pnob, budget);
++      BUG_ON(work_done > budget);
++
++      /* All consumed */
++      if (work_done < budget) {
++              netif_rx_complete(napi);
++              /* enable intr */
++              be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 1);
++      } else {
++              /* More to be consumed; continue with interrupts disabled */
++              be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 0);
++      }
++      return work_done;
++}
++
++static struct EQ_ENTRY_AMAP *get_event(struct be_net_object *pnob)
++{
++      struct EQ_ENTRY_AMAP *eqp = &(pnob->event_q[pnob->event_q_tl]);
++      if (!AMAP_GET_BITS_PTR(EQ_ENTRY, Valid, eqp))
++              return NULL;
++      be_adv_eq_tl(pnob);
++      return eqp;
++}
++
++/*
++ * Processes all valid events in the event ring associated with given
++ * NetObject.  Also, notifies BE the number of events processed.
++ */
++static inline u32 process_events(struct be_net_object *pnob)
++{
++      struct be_adapter *adapter = pnob->adapter;
++      struct EQ_ENTRY_AMAP *eqp;
++      u32 rid, num_events = 0;
++      struct net_device *netdev = pnob->netdev;
++
++      while ((eqp = get_event(pnob)) != NULL) {
++              adapter->be_stat.bes_events++;
++              rid = AMAP_GET_BITS_PTR(EQ_ENTRY, ResourceID, eqp);
++              if (rid == pnob->rx_cq_id) {
++                      adapter->be_stat.bes_rx_events++;
++                      netif_rx_schedule(&pnob->napi);
++              } else if (rid == pnob->tx_cq_id) {
++                      process_nic_tx_completions(pnob);
++              } else if (rid == pnob->mcc_cq_id) {
++                      be_mcc_process_cq(&pnob->mcc_q_obj, 1);
++              } else {
++                      dev_info(&netdev->dev,
++                                      "Invalid EQ ResourceID %d\n", rid);
++              }
++              AMAP_SET_BITS_PTR(EQ_ENTRY, Valid, eqp, 0);
++              AMAP_SET_BITS_PTR(EQ_ENTRY, ResourceID, eqp, 0);
++              num_events++;
++      }
++      return num_events;
++}
++
++static void update_eqd(struct be_adapter *adapter, struct be_net_object *pnob)
++{
++      int status;
++      struct be_eq_object *eq_objectp;
++
++      /* update once a second */
++      if ((jiffies - adapter->ips_jiffies) > 1 * (HZ)) {
++              /* One second elapsed since last update  */
++              u32 r, new_eqd = -1;
++              r = adapter->be_stat.bes_ints - adapter->be_stat.bes_prev_ints;
++              r = r / ((jiffies - adapter->ips_jiffies) / (HZ));
++              adapter->be_stat.bes_ips = r;
++              adapter->ips_jiffies = jiffies;
++              adapter->be_stat.bes_prev_ints = adapter->be_stat.bes_ints;
++              if (r > IPS_HI_WM && adapter->cur_eqd < adapter->max_eqd)
++                      new_eqd = (adapter->cur_eqd + 8);
++              if (r < IPS_LO_WM && adapter->cur_eqd > adapter->min_eqd)
++                      new_eqd = (adapter->cur_eqd - 8);
++              if (adapter->enable_aic && new_eqd != -1) {
++                      eq_objectp = &pnob->event_q_obj;
++                      status = be_eq_modify_delay(&pnob->fn_obj, 1,
++                                                  &eq_objectp, &new_eqd, NULL,
++                                                  NULL, NULL);
++                      if (status == BE_SUCCESS)
++                              adapter->cur_eqd = new_eqd;
++              }
++      }
++}
++
++/*
++    This function notifies BladeEngine of how many events were processed
++    from the event queue by ringing the corresponding door bell and
++    optionally re-arms the event queue.
++    n         - number of events processed
++    re_arm    - 1 - re-arm the EQ, 0 - do not re-arm the EQ
++
++*/
++static void be_notify_event(struct be_net_object *pnob, int n, int re_arm)
++{
++      struct CQ_DB_AMAP eqdb;
++      eqdb.dw[0] = 0;
++
++      AMAP_SET_BITS_PTR(CQ_DB, qid, &eqdb, pnob->event_q_id);
++      AMAP_SET_BITS_PTR(CQ_DB, rearm, &eqdb, re_arm);
++      AMAP_SET_BITS_PTR(CQ_DB, event, &eqdb, 1);
++      AMAP_SET_BITS_PTR(CQ_DB, num_popped, &eqdb, n);
++      /*
++       * Under some situations we see an interrupt and no valid
++       * EQ entry.  To keep going, we need to ring the DB even if
++       * numPOsted is 0.
++       */
++      PD_WRITE(&pnob->fn_obj, cq_db, eqdb.dw[0]);
++      return;
++}
++
++/*
++ * Called from the tasklet scheduled by ISR.  All real interrupt processing
++ * is done here.
++ */
++void be_process_intr(unsigned long context)
++{
++      struct be_adapter *adapter = (struct be_adapter *)context;
++      struct be_net_object *pnob = adapter->net_obj;
++      u32 isr, n;
++      ulong flags = 0;
++
++      isr = adapter->isr;
++
++      /*
++       * we create only one NIC event queue in Linux. Event is
++       * expected only in the first event queue
++       */
++      BUG_ON(isr & 0xfffffffe);
++      if ((isr & 1) == 0)
++              return;         /* not our interrupt */
++      n = process_events(pnob);
++      /*
++       * Clear the event bit. adapter->isr is  set by
++       * hard interrupt.  Prevent race with lock.
++       */
++      spin_lock_irqsave(&adapter->int_lock, flags);
++      adapter->isr &= ~1;
++      spin_unlock_irqrestore(&adapter->int_lock, flags);
++      be_notify_event(pnob, n, 1);
++      /*
++       * If previous allocation attempts had failed and
++       * BE has used up all posted buffers, post RX buffers here
++       */
++      if (pnob->rxbuf_post_fail && atomic_read(&pnob->rx_q_posted) == 0)
++              be_post_eth_rx_buffs(pnob);
++      update_eqd(adapter, pnob);
++      return;
++}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/benet.h linux-2.6.29-rc3.owrt/drivers/staging/benet/benet.h
+--- linux-2.6.29.owrt/drivers/staging/benet/benet.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/benet.h        2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,429 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#ifndef _BENET_H_
++#define _BENET_H_
++
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/inet_lro.h>
++#include "hwlib.h"
++
++#define _SA_MODULE_NAME "net-driver"
++
++#define VLAN_VALID_BIT                0x8000
++#define BE_NUM_VLAN_SUPPORTED 32
++#define BE_PORT_LINK_DOWN       0000
++#define BE_PORT_LINK_UP         0001
++#define       BE_MAX_TX_FRAG_COUNT            (30)
++
++/* Flag bits for send operation */
++#define IPCS            (1 << 0)      /* Enable IP checksum offload */
++#define UDPCS           (1 << 1)      /* Enable UDP checksum offload */
++#define TCPCS           (1 << 2)      /* Enable TCP checksum offload */
++#define LSO             (1 << 3)      /* Enable Large Segment  offload */
++#define ETHVLAN         (1 << 4)      /* Enable VLAN insert */
++#define ETHEVENT        (1 << 5)      /* Generate  event on completion */
++#define ETHCOMPLETE     (1 << 6)      /* Generate completion when done */
++#define IPSEC           (1 << 7)      /* Enable IPSEC */
++#define FORWARD         (1 << 8)      /* Send the packet in forwarding path */
++#define FIN             (1 << 9)      /* Issue FIN segment */
++
++#define BE_MAX_MTU    8974
++
++#define BE_MAX_LRO_DESCRIPTORS                        8
++#define BE_LRO_MAX_PKTS                               64
++#define BE_MAX_FRAGS_PER_FRAME                        6
++
++extern const char be_drvr_ver[];
++extern char be_fw_ver[];
++extern char be_driver_name[];
++
++extern struct ethtool_ops be_ethtool_ops;
++
++#define BE_DEV_STATE_NONE 0
++#define BE_DEV_STATE_INIT 1
++#define BE_DEV_STATE_OPEN 2
++#define BE_DEV_STATE_SUSPEND 3
++
++/* This structure is used to describe physical fragments to use
++ * for DMAing data from NIC.
++ */
++struct be_recv_buffer {
++      struct list_head rxb_list;      /* for maintaining a linked list */
++      void *rxb_va;           /* buffer virtual address */
++      u32 rxb_pa_lo;          /* low part of physical address */
++      u32 rxb_pa_hi;          /* high part of physical address */
++      u32 rxb_len;            /* length of recv buffer */
++      void *rxb_ctxt;         /* context for OSM driver to use */
++};
++
++/*
++ * fragment list to describe scattered data.
++ */
++struct be_tx_frag_list {
++      u32 txb_len;            /* Size of this fragment */
++      u32 txb_pa_lo;          /* Lower 32 bits of 64 bit physical addr */
++      u32 txb_pa_hi;          /* Higher 32 bits of 64 bit physical addr */
++};
++
++struct be_rx_page_info {
++      struct page *page;
++      dma_addr_t bus;
++      u16 page_offset;
++};
++
++/*
++ *  This structure is the main tracking structure for a NIC interface.
++ */
++struct be_net_object {
++      /* MCC Ring - used to send fwcmds to embedded ARM processor */
++      struct MCC_WRB_AMAP *mcc_q;     /* VA of the start of the ring */
++      u32 mcc_q_len;                  /* # of WRB entries in this ring */
++      u32 mcc_q_size;
++      u32 mcc_q_hd;                   /* MCC ring head */
++      u8 mcc_q_created;               /* flag to help cleanup */
++      struct be_mcc_object mcc_q_obj; /* BECLIB's MCC ring Object */
++      dma_addr_t mcc_q_bus;           /* DMA'ble bus address */
++
++      /* MCC Completion Ring - FW responses to fwcmds sent from MCC ring */
++      struct MCC_CQ_ENTRY_AMAP *mcc_cq; /* VA of the start of the ring */
++      u32 mcc_cq_len;                 /* # of compl. entries in this ring */
++      u32 mcc_cq_size;
++      u32 mcc_cq_tl;                  /* compl. ring tail */
++      u8 mcc_cq_created;              /* flag to help cleanup */
++      struct be_cq_object mcc_cq_obj; /* BECLIB's MCC compl. ring object */
++      u32 mcc_cq_id;                  /* MCC ring ID */
++      dma_addr_t mcc_cq_bus;          /* DMA'ble bus address */
++
++      struct ring_desc mb_rd;         /* RD for MCC_MAIL_BOX */
++      void *mb_ptr;                   /* mailbox ptr to be freed  */
++      dma_addr_t mb_bus;              /* DMA'ble bus address */
++      u32 mb_size;
++
++      /* BEClib uses an array of context objects to track outstanding
++       * requests to the MCC.  We need allocate the same number of
++       * conext entries as the number of entries in the MCC WRB ring
++       */
++      u32 mcc_wrb_ctxt_size;
++      void *mcc_wrb_ctxt;             /* pointer to the context area */
++      u32 mcc_wrb_ctxtLen;            /* Number of entries in the context */
++      /*
++       * NIC send request ring - used for xmitting raw ether frames.
++       */
++      struct ETH_WRB_AMAP *tx_q;      /* VA of the start of the ring */
++      u32 tx_q_len;                   /* # if entries in the send ring */
++      u32 tx_q_size;
++      u32 tx_q_hd;                    /* Head index. Next req. goes here */
++      u32 tx_q_tl;                    /* Tail indx. oldest outstanding req. */
++      u8 tx_q_created;                /* flag to help cleanup */
++      struct be_ethsq_object tx_q_obj;/* BECLIB's send Q handle */
++      dma_addr_t tx_q_bus;            /* DMA'ble bus address */
++      u32 tx_q_id;                    /* send queue ring ID */
++      u32 tx_q_port;                  /* 0 no binding, 1 port A,  2 port B */
++      atomic_t tx_q_used;             /* # of WRBs used */
++      /* ptr to an array in which we store context info for each send req. */
++      void **tx_ctxt;
++      /*
++       * NIC Send compl. ring - completion status for all NIC frames xmitted.
++       */
++      struct ETH_TX_COMPL_AMAP *tx_cq;/* VA of start of the ring */
++      u32 txcq_len;                   /* # of entries in the ring */
++      u32 tx_cq_size;
++      /*
++       * index into compl ring where the host expects next completion entry
++       */
++      u32 tx_cq_tl;
++      u32 tx_cq_id;                   /* completion queue id */
++      u8 tx_cq_created;               /* flag to help cleanup */
++      struct be_cq_object tx_cq_obj;
++      dma_addr_t tx_cq_bus;           /* DMA'ble bus address */
++      /*
++       * Event Queue - all completion entries post events here.
++       */
++      struct EQ_ENTRY_AMAP *event_q;  /* VA of start of event queue */
++      u32 event_q_len;                /* # of entries */
++      u32 event_q_size;
++      u32 event_q_tl;                 /* Tail of the event queue */
++      u32 event_q_id;                 /* Event queue ID */
++      u8 event_q_created;             /* flag to help cleanup */
++      struct be_eq_object event_q_obj; /* Queue handle */
++      dma_addr_t event_q_bus;         /* DMA'ble bus address */
++      /*
++       * NIC receive queue - Data buffers to be used for receiving unicast,
++       * broadcast and multi-cast frames  are posted here.
++       */
++      struct ETH_RX_D_AMAP *rx_q;     /* VA of start of the queue */
++      u32 rx_q_len;                   /* # of entries */
++      u32 rx_q_size;
++      u32 rx_q_hd;                    /* Head of the queue */
++      atomic_t rx_q_posted;           /* number of posted buffers */
++      u32 rx_q_id;                    /* queue ID */
++      u8 rx_q_created;                /* flag to help cleanup */
++      struct be_ethrq_object rx_q_obj;        /* NIC RX queue handle */
++      dma_addr_t rx_q_bus;            /* DMA'ble bus address */
++      /*
++       * Pointer to an array of opaque context object for use by OSM driver
++       */
++      void **rx_ctxt;
++      /*
++       * NIC unicast RX completion queue - all unicast ether frame completion
++       * statuses from BE come here.
++       */
++      struct ETH_RX_COMPL_AMAP *rx_cq;        /* VA of start of the queue */
++      u32 rx_cq_len;          /* # of entries */
++      u32 rx_cq_size;
++      u32 rx_cq_tl;                   /* Tail of the queue */
++      u32 rx_cq_id;                   /* queue ID */
++      u8 rx_cq_created;               /* flag to help cleanup */
++      struct be_cq_object rx_cq_obj;  /* queue handle */
++      dma_addr_t rx_cq_bus;           /* DMA'ble bus address */
++      struct be_function_object fn_obj;       /* function object   */
++      bool    fn_obj_created;
++      u32 rx_buf_size;                /* Size of the RX buffers */
++
++      struct net_device *netdev;
++      struct be_recv_buffer eth_rx_bufs[256]; /* to pass Rx buffer
++                                                         addresses */
++      struct be_adapter *adapter;     /* Pointer to OSM adapter */
++      u32 devno;              /* OSM, network dev no. */
++      u32 use_port;           /* Current active port */
++      struct be_rx_page_info *rx_page_info;   /* Array of Rx buf pages */
++      u32 rx_pg_info_hd;      /* Head of queue */
++      int rxbuf_post_fail;    /* RxBuff posting fail count */
++      bool rx_pg_shared;      /* Is an allocsted page shared as two frags ? */
++      struct vlan_group *vlan_grp;
++      u32 num_vlans;          /* Number of vlans in BE's filter */
++      u16 vlan_tag[BE_NUM_VLAN_SUPPORTED]; /* vlans currently configured */
++      struct napi_struct napi;
++      struct net_lro_mgr lro_mgr;
++      struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
++};
++
++#define NET_FH(np)       (&(np)->fn_obj)
++
++/*
++ * BE driver statistics.
++ */
++struct be_drvr_stat {
++      u32 bes_tx_reqs;        /* number of TX requests initiated */
++      u32 bes_tx_fails;       /* number of TX requests that failed */
++      u32 bes_fwd_reqs;       /* number of send reqs through forwarding i/f */
++      u32 bes_tx_wrbs;        /* number of tx WRBs used */
++
++      u32 bes_ints;           /* number of interrupts */
++      u32 bes_polls;          /* number of times NAPI called poll function */
++      u32 bes_events;         /* total evet entries processed */
++      u32 bes_tx_events;      /* number of tx completion events  */
++      u32 bes_rx_events;      /* number of ucast rx completion events  */
++      u32 bes_tx_compl;       /* number of tx completion entries processed */
++      u32 bes_rx_compl;       /* number of rx completion entries
++                                 processed */
++      u32 bes_ethrx_post_fail;        /* number of ethrx buffer alloc
++                                         failures */
++      /*
++       * number of non ether type II frames dropped where
++       * frame len > length field of Mac Hdr
++       */
++      u32 bes_802_3_dropped_frames;
++      /*
++       * number of non ether type II frames malformed where
++       * in frame len < length field of Mac Hdr
++       */
++      u32 bes_802_3_malformed_frames;
++      u32 bes_ips;            /*  interrupts / sec */
++      u32 bes_prev_ints;      /* bes_ints at last IPS calculation  */
++      u16 bes_eth_tx_rate;    /*  ETH TX rate - Mb/sec */
++      u16 bes_eth_rx_rate;    /*  ETH RX rate - Mb/sec */
++      u32 bes_rx_coal;        /* Num pkts coalasced */
++      u32 bes_rx_flush;       /* Num times coalasced */
++      u32 bes_link_change_physical;   /*Num of times physical link changed */
++      u32 bes_link_change_virtual;    /*Num of times virtual link changed */
++      u32 bes_rx_misc_pkts;   /* Misc pkts received */
++};
++
++/* Maximum interrupt delay (in microseconds) allowed */
++#define MAX_EQD                               120
++
++/*
++ * timer to prevent system shutdown hang for ever if h/w stops responding
++ */
++struct be_timer_ctxt {
++      atomic_t get_stat_flag;
++      struct timer_list get_stats_timer;
++      unsigned long get_stat_sem_addr;
++} ;
++
++/* This structure is the main BladeEngine driver context.  */
++struct be_adapter {
++      struct net_device *netdevp;
++      struct be_drvr_stat be_stat;
++      struct net_device_stats benet_stats;
++
++      /* PCI BAR mapped addresses */
++      u8 __iomem *csr_va;     /* CSR */
++      u8 __iomem *db_va;      /* Door  Bell  */
++      u8 __iomem *pci_va;     /* PCI Config */
++
++      struct tasklet_struct sts_handler;
++      struct timer_list cq_timer;
++      spinlock_t int_lock;    /* to protect the isr field in adapter */
++
++      struct FWCMD_ETH_GET_STATISTICS *eth_statsp;
++      /*
++       * This will enable the use of ethtool to enable or disable
++       * Checksum on Rx pkts to be obeyed or disobeyed.
++       * If this is true = 1, then whatever is the checksum on the
++       * Received pkt as per BE, it will be given to the stack.
++       * Else the stack will re calculate it.
++       */
++      bool rx_csum;
++      /*
++       * This will enable the use of ethtool to enable or disable
++       * Coalese on Rx pkts to be obeyed or disobeyed.
++       * If this is grater than 0 and less than 16 then coalascing
++       * is enabled else it is disabled
++       */
++      u32 max_rx_coal;
++      struct pci_dev *pdev;   /* Pointer to OS's PCI dvice */
++
++      spinlock_t txq_lock;    /* to stop/wake queue based on tx_q_used */
++
++      u32 isr;                /* copy of Intr status reg. */
++
++      u32 port0_link_sts;     /* Port 0 link status */
++      u32 port1_link_sts;     /* port 1 list status */
++      struct BE_LINK_STATUS *be_link_sts;
++
++      /* pointer to the first netobject of this adapter */
++      struct be_net_object *net_obj;
++
++      /*  Flags to indicate what to clean up */
++      bool tasklet_started;
++      bool isr_registered;
++      /*
++       * adaptive interrupt coalescing (AIC) related
++       */
++      bool enable_aic;        /* 1 if AIC is enabled */
++      u16 min_eqd;            /* minimum EQ delay in usec */
++      u16 max_eqd;            /* minimum EQ delay in usec */
++      u16 cur_eqd;            /* current EQ delay in usec */
++      /*
++       * book keeping for interrupt / sec and TX/RX rate calculation
++       */
++      ulong ips_jiffies;      /* jiffies at last IPS calc */
++      u32 eth_tx_bytes;
++      ulong eth_tx_jiffies;
++      u32 eth_rx_bytes;
++      ulong eth_rx_jiffies;
++
++      struct semaphore get_eth_stat_sem;
++
++      /* timer ctxt to prevent shutdown hanging due to un-responsive BE */
++      struct be_timer_ctxt timer_ctxt;
++
++#define BE_MAX_MSIX_VECTORS             32
++#define BE_MAX_REQ_MSIX_VECTORS         1 /* only one EQ in Linux driver */
++      struct msix_entry msix_entries[BE_MAX_MSIX_VECTORS];
++      bool msix_enabled;
++      bool dma_64bit_cap;     /* the Device DAC capable  or not */
++      u8 dev_state;   /* The current state of the device */
++      u8 dev_pm_state; /* The State of device before going to suspend */
++};
++
++/*
++ * Every second we look at the ints/sec and adjust eq_delay
++ * between adapter->min_eqd and adapter->max_eqd to keep the ints/sec between
++ * IPS_HI_WM and IPS_LO_WM.
++ */
++#define IPS_HI_WM     18000
++#define IPS_LO_WM     8000
++
++
++static inline void index_adv(u32 *index, u32 val,  u32 limit)
++{
++      BUG_ON(limit & (limit-1));
++      *index = (*index + val) & (limit - 1);
++}
++
++static inline void index_inc(u32 *index, u32 limit)
++{
++      BUG_ON(limit & (limit-1));
++      *index = (*index + 1) & (limit - 1);
++}
++
++static inline void be_adv_eq_tl(struct be_net_object *pnob)
++{
++      index_inc(&pnob->event_q_tl, pnob->event_q_len);
++}
++
++static inline void be_adv_txq_hd(struct be_net_object *pnob)
++{
++      index_inc(&pnob->tx_q_hd, pnob->tx_q_len);
++}
++
++static inline void be_adv_txq_tl(struct be_net_object *pnob)
++{
++      index_inc(&pnob->tx_q_tl, pnob->tx_q_len);
++}
++
++static inline void be_adv_txcq_tl(struct be_net_object *pnob)
++{
++      index_inc(&pnob->tx_cq_tl, pnob->txcq_len);
++}
++
++static inline void be_adv_rxq_hd(struct be_net_object *pnob)
++{
++      index_inc(&pnob->rx_q_hd, pnob->rx_q_len);
++}
++
++static inline void be_adv_rxcq_tl(struct be_net_object *pnob)
++{
++      index_inc(&pnob->rx_cq_tl, pnob->rx_cq_len);
++}
++
++static inline u32 tx_compl_lastwrb_idx_get(struct be_net_object *pnob)
++{
++      return (pnob->tx_q_tl + *(u32 *)&pnob->tx_ctxt[pnob->tx_q_tl] - 1)
++                  & (pnob->tx_q_len - 1);
++}
++
++int benet_init(struct net_device *);
++int be_ethtool_ioctl(struct net_device *, struct ifreq *);
++struct net_device_stats *benet_get_stats(struct net_device *);
++void be_process_intr(unsigned long context);
++irqreturn_t be_int(int irq, void *dev);
++void be_post_eth_rx_buffs(struct be_net_object *);
++void be_get_stat_cb(void *, int, struct MCC_WRB_AMAP *);
++void be_get_stats_timer_handler(unsigned long);
++void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *);
++void be_print_link_info(struct BE_LINK_STATUS *);
++void be_update_link_status(struct be_adapter *);
++void be_init_procfs(struct be_adapter *);
++void be_cleanup_procfs(struct be_adapter *);
++int be_poll(struct napi_struct *, int);
++struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *);
++void be_notify_cmpl(struct be_net_object *, int, int, int);
++void be_enable_intr(struct be_net_object *);
++void be_enable_eq_intr(struct be_net_object *);
++void be_disable_intr(struct be_net_object *);
++void be_disable_eq_intr(struct be_net_object *);
++int be_set_uc_mac_adr(struct be_net_object *, u8, u8, u8,
++                  u8 *, mcc_wrb_cqe_callback, void *);
++int be_get_flow_ctl(struct be_function_object *pFnObj, bool *, bool *);
++void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx);
++
++#endif /* _BENET_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/be_netif.c linux-2.6.29-rc3.owrt/drivers/staging/benet/be_netif.c
+--- linux-2.6.29.owrt/drivers/staging/benet/be_netif.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/be_netif.c     2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,705 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * be_netif.c
++ *
++ * This file contains various entry points of drivers seen by tcp/ip stack.
++ */
++
++#include <linux/if_vlan.h>
++#include <linux/in.h>
++#include "benet.h"
++#include <linux/ip.h>
++#include <linux/inet_lro.h>
++
++/* Strings to print Link properties */
++static const char *link_speed[] = {
++      "Invalid link Speed Value",
++      "10 Mbps",
++      "100 Mbps",
++      "1 Gbps",
++      "10 Gbps"
++};
++
++static const char *link_duplex[] = {
++      "Invalid Duplex Value",
++      "Half Duplex",
++      "Full Duplex"
++};
++
++static const char *link_state[] = {
++      "",
++      "(active)"
++};
++
++void be_print_link_info(struct BE_LINK_STATUS *lnk_status)
++{
++      u16 si, di, ai;
++
++      /* Port 0 */
++      if (lnk_status->mac0_speed && lnk_status->mac0_duplex) {
++              /* Port is up and running */
++              si = (lnk_status->mac0_speed < 5) ? lnk_status->mac0_speed : 0;
++              di = (lnk_status->mac0_duplex < 3) ?
++                  lnk_status->mac0_duplex : 0;
++              ai = (lnk_status->active_port == 0) ? 1 : 0;
++              printk(KERN_INFO "PortNo. 0: Speed - %s %s %s\n",
++                     link_speed[si], link_duplex[di], link_state[ai]);
++      } else
++              printk(KERN_INFO "PortNo. 0: Down\n");
++
++      /* Port 1 */
++      if (lnk_status->mac1_speed && lnk_status->mac1_duplex) {
++              /* Port is up and running */
++              si = (lnk_status->mac1_speed < 5) ? lnk_status->mac1_speed : 0;
++              di = (lnk_status->mac1_duplex < 3) ?
++                  lnk_status->mac1_duplex : 0;
++              ai = (lnk_status->active_port == 0) ? 1 : 0;
++              printk(KERN_INFO "PortNo. 1: Speed - %s %s %s\n",
++                     link_speed[si], link_duplex[di], link_state[ai]);
++      } else
++              printk(KERN_INFO "PortNo. 1: Down\n");
++
++      return;
++}
++
++static int
++be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
++                 void **ip_hdr, void **tcpudp_hdr,
++                 u64 *hdr_flags, void *priv)
++{
++      struct ethhdr *eh;
++      struct vlan_ethhdr *veh;
++      struct iphdr *iph;
++      u8 *va = page_address(frag->page) + frag->page_offset;
++      unsigned long ll_hlen;
++
++      /* find the mac header, abort if not IPv4 */
++
++      prefetch(va);
++      eh = (struct ethhdr *)va;
++      *mac_hdr = eh;
++      ll_hlen = ETH_HLEN;
++      if (eh->h_proto != htons(ETH_P_IP)) {
++              if (eh->h_proto == htons(ETH_P_8021Q)) {
++                      veh = (struct vlan_ethhdr *)va;
++                      if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
++                              return -1;
++
++                      ll_hlen += VLAN_HLEN;
++
++              } else {
++                      return -1;
++              }
++      }
++      *hdr_flags = LRO_IPV4;
++
++      iph = (struct iphdr *)(va + ll_hlen);
++      *ip_hdr = iph;
++      if (iph->protocol != IPPROTO_TCP)
++              return -1;
++      *hdr_flags |= LRO_TCP;
++      *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
++
++      return 0;
++}
++
++static int benet_open(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      struct net_lro_mgr *lro_mgr;
++
++      if (adapter->dev_state < BE_DEV_STATE_INIT)
++              return -EAGAIN;
++
++      lro_mgr = &pnob->lro_mgr;
++      lro_mgr->dev = netdev;
++
++      lro_mgr->features = LRO_F_NAPI;
++      lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
++      lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
++      lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
++      lro_mgr->lro_arr = pnob->lro_desc;
++      lro_mgr->get_frag_header = be_get_frag_header;
++      lro_mgr->max_aggr = adapter->max_rx_coal;
++      lro_mgr->frag_align_pad = 2;
++      if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
++              lro_mgr->max_aggr = MAX_SKB_FRAGS;
++
++      adapter->max_rx_coal = BE_LRO_MAX_PKTS;
++
++      be_update_link_status(adapter);
++
++      /*
++       * Set carrier on only if Physical Link up
++       * Either of the port link status up signifies this
++       */
++      if ((adapter->port0_link_sts == BE_PORT_LINK_UP) ||
++          (adapter->port1_link_sts == BE_PORT_LINK_UP)) {
++              netif_start_queue(netdev);
++              netif_carrier_on(netdev);
++      }
++
++      adapter->dev_state = BE_DEV_STATE_OPEN;
++      napi_enable(&pnob->napi);
++      be_enable_intr(pnob);
++      be_enable_eq_intr(pnob);
++      /*
++       * RX completion queue may be in dis-armed state. Arm it.
++       */
++      be_notify_cmpl(pnob, 0, pnob->rx_cq_id, 1);
++
++      return 0;
++}
++
++static int benet_close(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++
++      netif_stop_queue(netdev);
++      synchronize_irq(netdev->irq);
++
++      be_wait_nic_tx_cmplx_cmpl(pnob);
++      adapter->dev_state = BE_DEV_STATE_INIT;
++      netif_carrier_off(netdev);
++
++      adapter->port0_link_sts = BE_PORT_LINK_DOWN;
++      adapter->port1_link_sts = BE_PORT_LINK_DOWN;
++      be_disable_intr(pnob);
++      be_disable_eq_intr(pnob);
++      napi_disable(&pnob->napi);
++
++      return 0;
++}
++
++/*
++ * Setting a Mac Address for BE
++ * Takes netdev and a void pointer as arguments.
++ * The pointer holds the new addres to be used.
++ */
++static int benet_set_mac_addr(struct net_device *netdev, void *p)
++{
++      struct sockaddr *addr = p;
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++      be_rxf_mac_address_read_write(&pnob->fn_obj, 0, 0, false, true, false,
++                              netdev->dev_addr, NULL, NULL);
++      /*
++       * Since we are doing Active-Passive failover, both
++       * ports should have matching MAC addresses everytime.
++       */
++      be_rxf_mac_address_read_write(&pnob->fn_obj, 1, 0, false, true, false,
++                                    netdev->dev_addr, NULL, NULL);
++
++      return 0;
++}
++
++void be_get_stats_timer_handler(unsigned long context)
++{
++      struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
++
++      if (atomic_read(&ctxt->get_stat_flag)) {
++              atomic_dec(&ctxt->get_stat_flag);
++              up((void *)ctxt->get_stat_sem_addr);
++      }
++      del_timer(&ctxt->get_stats_timer);
++      return;
++}
++
++void be_get_stat_cb(void *context, int status,
++                  struct MCC_WRB_AMAP *optional_wrb)
++{
++      struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
++      /*
++       * just up the semaphore if the get_stat_flag
++       * reads 1. so that the waiter can continue.
++       * If it is 0, then it was handled by the timer handler.
++       */
++      del_timer(&ctxt->get_stats_timer);
++      if (atomic_read(&ctxt->get_stat_flag)) {
++              atomic_dec(&ctxt->get_stat_flag);
++              up((void *)ctxt->get_stat_sem_addr);
++      }
++}
++
++struct net_device_stats *benet_get_stats(struct net_device *dev)
++{
++      struct be_net_object *pnob = netdev_priv(dev);
++      struct be_adapter *adapter = pnob->adapter;
++      u64 pa;
++      struct be_timer_ctxt *ctxt = &adapter->timer_ctxt;
++
++      if (adapter->dev_state != BE_DEV_STATE_OPEN) {
++              /* Return previously read stats */
++              return &(adapter->benet_stats);
++      }
++      /* Get Physical Addr */
++      pa = pci_map_single(adapter->pdev, adapter->eth_statsp,
++                          sizeof(struct FWCMD_ETH_GET_STATISTICS),
++                          PCI_DMA_FROMDEVICE);
++      ctxt->get_stat_sem_addr = (unsigned long)&adapter->get_eth_stat_sem;
++      atomic_inc(&ctxt->get_stat_flag);
++
++      be_rxf_query_eth_statistics(&pnob->fn_obj, adapter->eth_statsp,
++                                  cpu_to_le64(pa), be_get_stat_cb, ctxt,
++                                  NULL);
++
++      ctxt->get_stats_timer.data = (unsigned long)ctxt;
++      mod_timer(&ctxt->get_stats_timer, (jiffies + (HZ * 2)));
++      down((void *)ctxt->get_stat_sem_addr);  /* callback will unblock us */
++
++      /* Adding port0 and port1 stats. */
++      adapter->benet_stats.rx_packets =
++          adapter->eth_statsp->params.response.p0recvdtotalframes +
++          adapter->eth_statsp->params.response.p1recvdtotalframes;
++      adapter->benet_stats.tx_packets =
++          adapter->eth_statsp->params.response.p0xmitunicastframes +
++          adapter->eth_statsp->params.response.p1xmitunicastframes;
++      adapter->benet_stats.tx_bytes =
++          adapter->eth_statsp->params.response.p0xmitbyteslsd +
++          adapter->eth_statsp->params.response.p1xmitbyteslsd;
++      adapter->benet_stats.rx_errors =
++          adapter->eth_statsp->params.response.p0crcerrors +
++          adapter->eth_statsp->params.response.p1crcerrors;
++      adapter->benet_stats.rx_errors +=
++          adapter->eth_statsp->params.response.p0alignmentsymerrs +
++          adapter->eth_statsp->params.response.p1alignmentsymerrs;
++      adapter->benet_stats.rx_errors +=
++          adapter->eth_statsp->params.response.p0inrangelenerrors +
++          adapter->eth_statsp->params.response.p1inrangelenerrors;
++      adapter->benet_stats.rx_bytes =
++          adapter->eth_statsp->params.response.p0recvdtotalbytesLSD +
++          adapter->eth_statsp->params.response.p1recvdtotalbytesLSD;
++      adapter->benet_stats.rx_crc_errors =
++          adapter->eth_statsp->params.response.p0crcerrors +
++          adapter->eth_statsp->params.response.p1crcerrors;
++
++      adapter->benet_stats.tx_packets +=
++          adapter->eth_statsp->params.response.p0xmitmulticastframes +
++          adapter->eth_statsp->params.response.p1xmitmulticastframes;
++      adapter->benet_stats.tx_packets +=
++          adapter->eth_statsp->params.response.p0xmitbroadcastframes +
++          adapter->eth_statsp->params.response.p1xmitbroadcastframes;
++      adapter->benet_stats.tx_errors = 0;
++
++      adapter->benet_stats.multicast =
++          adapter->eth_statsp->params.response.p0xmitmulticastframes +
++          adapter->eth_statsp->params.response.p1xmitmulticastframes;
++
++      adapter->benet_stats.rx_fifo_errors =
++          adapter->eth_statsp->params.response.p0rxfifooverflowdropped +
++          adapter->eth_statsp->params.response.p1rxfifooverflowdropped;
++      adapter->benet_stats.rx_frame_errors =
++          adapter->eth_statsp->params.response.p0alignmentsymerrs +
++          adapter->eth_statsp->params.response.p1alignmentsymerrs;
++      adapter->benet_stats.rx_length_errors =
++          adapter->eth_statsp->params.response.p0inrangelenerrors +
++          adapter->eth_statsp->params.response.p1inrangelenerrors;
++      adapter->benet_stats.rx_length_errors +=
++          adapter->eth_statsp->params.response.p0outrangeerrors +
++          adapter->eth_statsp->params.response.p1outrangeerrors;
++      adapter->benet_stats.rx_length_errors +=
++          adapter->eth_statsp->params.response.p0frametoolongerrors +
++          adapter->eth_statsp->params.response.p1frametoolongerrors;
++
++      pci_unmap_single(adapter->pdev, (ulong) adapter->eth_statsp,
++                       sizeof(struct FWCMD_ETH_GET_STATISTICS),
++                       PCI_DMA_FROMDEVICE);
++      return &(adapter->benet_stats);
++
++}
++
++static void be_start_tx(struct be_net_object *pnob, u32 nposted)
++{
++#define CSR_ETH_MAX_SQPOSTS 255
++      struct SQ_DB_AMAP sqdb;
++
++      sqdb.dw[0] = 0;
++
++      AMAP_SET_BITS_PTR(SQ_DB, cid, &sqdb, pnob->tx_q_id);
++      while (nposted) {
++              if (nposted > CSR_ETH_MAX_SQPOSTS) {
++                      AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb,
++                                        CSR_ETH_MAX_SQPOSTS);
++                      nposted -= CSR_ETH_MAX_SQPOSTS;
++              } else {
++                      AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb, nposted);
++                      nposted = 0;
++              }
++              PD_WRITE(&pnob->fn_obj, etx_sq_db, sqdb.dw[0]);
++      }
++
++      return;
++}
++
++static void update_tx_rate(struct be_adapter *adapter)
++{
++      /* update the rate once in two seconds */
++      if ((jiffies - adapter->eth_tx_jiffies) > 2 * (HZ)) {
++              u32 r;
++              r = adapter->eth_tx_bytes /
++                  ((jiffies - adapter->eth_tx_jiffies) / (HZ));
++              r = (r / 1000000);      /* M bytes/s */
++              adapter->be_stat.bes_eth_tx_rate = (r * 8); /* M bits/s */
++              adapter->eth_tx_jiffies = jiffies;
++              adapter->eth_tx_bytes = 0;
++      }
++}
++
++static int wrb_cnt_in_skb(struct sk_buff *skb)
++{
++      int cnt = 0;
++      while (skb) {
++              if (skb->len > skb->data_len)
++                      cnt++;
++              cnt += skb_shinfo(skb)->nr_frags;
++              skb = skb_shinfo(skb)->frag_list;
++      }
++      BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
++      return cnt;
++}
++
++static void wrb_fill(struct ETH_WRB_AMAP *wrb, u64 addr, int len)
++{
++      AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb, addr >> 32);
++      AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb, addr & 0xFFFFFFFF);
++      AMAP_SET_BITS_PTR(ETH_WRB, frag_len, wrb, len);
++}
++
++static void wrb_fill_extra(struct ETH_WRB_AMAP *wrb, struct sk_buff *skb,
++                         struct be_net_object *pnob)
++{
++      wrb->dw[2] = 0;
++      wrb->dw[3] = 0;
++      AMAP_SET_BITS_PTR(ETH_WRB, crc, wrb, 1);
++      if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
++              AMAP_SET_BITS_PTR(ETH_WRB, lso, wrb, 1);
++              AMAP_SET_BITS_PTR(ETH_WRB, lso_mss, wrb,
++                                skb_shinfo(skb)->gso_size);
++      } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
++              u8 proto = ((struct iphdr *)ip_hdr(skb))->protocol;
++              if (proto == IPPROTO_TCP)
++                      AMAP_SET_BITS_PTR(ETH_WRB, tcpcs, wrb, 1);
++              else if (proto == IPPROTO_UDP)
++                      AMAP_SET_BITS_PTR(ETH_WRB, udpcs, wrb, 1);
++      }
++      if (pnob->vlan_grp && vlan_tx_tag_present(skb)) {
++              AMAP_SET_BITS_PTR(ETH_WRB, vlan, wrb, 1);
++              AMAP_SET_BITS_PTR(ETH_WRB, vlan_tag, wrb, vlan_tx_tag_get(skb));
++      }
++}
++
++static inline void wrb_copy_extra(struct ETH_WRB_AMAP *to,
++                                struct ETH_WRB_AMAP *from)
++{
++
++      to->dw[2] = from->dw[2];
++      to->dw[3] = from->dw[3];
++}
++
++/* Returns the actual count of wrbs used including a possible dummy */
++static int copy_skb_to_txq(struct be_net_object *pnob, struct sk_buff *skb,
++                         u32 wrb_cnt, u32 *copied)
++{
++      u64 busaddr;
++      struct ETH_WRB_AMAP *wrb = NULL, *first = NULL;
++      u32 i;
++      bool dummy = true;
++      struct pci_dev *pdev = pnob->adapter->pdev;
++
++      if (wrb_cnt & 1)
++              wrb_cnt++;
++      else
++              dummy = false;
++
++      atomic_add(wrb_cnt, &pnob->tx_q_used);
++
++      while (skb) {
++              if (skb->len > skb->data_len) {
++                      int len = skb->len - skb->data_len;
++                      busaddr = pci_map_single(pdev, skb->data, len,
++                                               PCI_DMA_TODEVICE);
++                      busaddr = cpu_to_le64(busaddr);
++                      wrb = &pnob->tx_q[pnob->tx_q_hd];
++                      if (first == NULL) {
++                              wrb_fill_extra(wrb, skb, pnob);
++                              first = wrb;
++                      } else {
++                              wrb_copy_extra(wrb, first);
++                      }
++                      wrb_fill(wrb, busaddr, len);
++                      be_adv_txq_hd(pnob);
++                      *copied += len;
++              }
++
++              for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
++                      struct skb_frag_struct *frag =
++                          &skb_shinfo(skb)->frags[i];
++                      busaddr = pci_map_page(pdev, frag->page,
++                                             frag->page_offset, frag->size,
++                                             PCI_DMA_TODEVICE);
++                      busaddr = cpu_to_le64(busaddr);
++                      wrb = &pnob->tx_q[pnob->tx_q_hd];
++                      if (first == NULL) {
++                              wrb_fill_extra(wrb, skb, pnob);
++                              first = wrb;
++                      } else {
++                              wrb_copy_extra(wrb, first);
++                      }
++                      wrb_fill(wrb, busaddr, frag->size);
++                      be_adv_txq_hd(pnob);
++                      *copied += frag->size;
++              }
++              skb = skb_shinfo(skb)->frag_list;
++      }
++
++      if (dummy) {
++              wrb = &pnob->tx_q[pnob->tx_q_hd];
++              BUG_ON(first == NULL);
++              wrb_copy_extra(wrb, first);
++              wrb_fill(wrb, 0, 0);
++              be_adv_txq_hd(pnob);
++      }
++      AMAP_SET_BITS_PTR(ETH_WRB, complete, wrb, 1);
++      AMAP_SET_BITS_PTR(ETH_WRB, last, wrb, 1);
++      return wrb_cnt;
++}
++
++/* For each skb transmitted, tx_ctxt stores the num of wrbs in the
++ * start index and skb pointer in the end index
++ */
++static inline void be_tx_wrb_info_remember(struct be_net_object *pnob,
++                                         struct sk_buff *skb, int wrb_cnt,
++                                         u32 start)
++{
++      *(u32 *) (&pnob->tx_ctxt[start]) = wrb_cnt;
++      index_adv(&start, wrb_cnt - 1, pnob->tx_q_len);
++      pnob->tx_ctxt[start] = skb;
++}
++
++static int benet_xmit(struct sk_buff *skb, struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++      u32 wrb_cnt, copied = 0;
++      u32 start = pnob->tx_q_hd;
++
++      adapter->be_stat.bes_tx_reqs++;
++
++      wrb_cnt = wrb_cnt_in_skb(skb);
++      spin_lock_bh(&adapter->txq_lock);
++      if ((pnob->tx_q_len - 2 - atomic_read(&pnob->tx_q_used)) <= wrb_cnt) {
++              netif_stop_queue(pnob->netdev);
++              spin_unlock_bh(&adapter->txq_lock);
++              adapter->be_stat.bes_tx_fails++;
++              return NETDEV_TX_BUSY;
++      }
++      spin_unlock_bh(&adapter->txq_lock);
++
++      wrb_cnt = copy_skb_to_txq(pnob, skb, wrb_cnt, &copied);
++      be_tx_wrb_info_remember(pnob, skb, wrb_cnt, start);
++
++      be_start_tx(pnob, wrb_cnt);
++
++      adapter->eth_tx_bytes += copied;
++      adapter->be_stat.bes_tx_wrbs += wrb_cnt;
++      update_tx_rate(adapter);
++      netdev->trans_start = jiffies;
++
++      return NETDEV_TX_OK;
++}
++
++/*
++ * This is the driver entry point to change the mtu of the device
++ * Returns 0 for success and errno for failure.
++ */
++static int benet_change_mtu(struct net_device *netdev, int new_mtu)
++{
++      /*
++       * BE supports jumbo frame size upto 9000 bytes including the link layer
++       * header. Considering the different variants of frame formats possible
++       * like VLAN, SNAP/LLC, the maximum possible value for MTU is 8974 bytes
++       */
++
++      if (new_mtu < (ETH_ZLEN + ETH_FCS_LEN) || (new_mtu > BE_MAX_MTU)) {
++              dev_info(&netdev->dev, "Invalid MTU requested. "
++                             "Must be between %d and %d bytes\n",
++                                     (ETH_ZLEN + ETH_FCS_LEN), BE_MAX_MTU);
++              return -EINVAL;
++      }
++      dev_info(&netdev->dev, "MTU changed from %d to %d\n",
++                                              netdev->mtu, new_mtu);
++      netdev->mtu = new_mtu;
++      return 0;
++}
++
++/*
++ * This is the driver entry point to register a vlan with the device
++ */
++static void benet_vlan_register(struct net_device *netdev,
++                              struct vlan_group *grp)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      be_disable_eq_intr(pnob);
++      pnob->vlan_grp = grp;
++      pnob->num_vlans = 0;
++      be_enable_eq_intr(pnob);
++}
++
++/*
++ * This is the driver entry point to add a vlan vlan_id
++ * with the device netdev
++ */
++static void benet_vlan_add_vid(struct net_device *netdev, u16 vlan_id)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      if (pnob->num_vlans == (BE_NUM_VLAN_SUPPORTED - 1)) {
++              /* no  way to return an error */
++              dev_info(&netdev->dev,
++                     "BladeEngine: Cannot configure more than %d Vlans\n",
++                             BE_NUM_VLAN_SUPPORTED);
++              return;
++      }
++      /* The new vlan tag will be in the slot indicated by num_vlans. */
++      pnob->vlan_tag[pnob->num_vlans++] = vlan_id;
++      be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
++                         pnob->vlan_tag, NULL, NULL, NULL);
++}
++
++/*
++ * This is the driver entry point to remove a vlan vlan_id
++ * with the device netdev
++ */
++static void benet_vlan_rem_vid(struct net_device *netdev, u16 vlan_id)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      u32 i, value;
++
++      /*
++       * In Blade Engine, we support 32 vlan tag filters across both ports.
++       * To program a vlan tag, the RXF_RTPR_CSR register is used.
++       * Each 32-bit value of RXF_RTDR_CSR can address 2 vlan tag entries.
++       * The Vlan table is of depth 16. thus we support 32 tags.
++       */
++
++      value = vlan_id | VLAN_VALID_BIT;
++      for (i = 0; i < BE_NUM_VLAN_SUPPORTED; i++) {
++              if (pnob->vlan_tag[i] == vlan_id)
++                      break;
++      }
++
++      if (i == BE_NUM_VLAN_SUPPORTED)
++              return;
++      /* Now compact the vlan tag array by removing hole created. */
++      while ((i + 1) < BE_NUM_VLAN_SUPPORTED) {
++              pnob->vlan_tag[i] = pnob->vlan_tag[i + 1];
++              i++;
++      }
++      if ((i + 1) == BE_NUM_VLAN_SUPPORTED)
++              pnob->vlan_tag[i] = (u16) 0x0;
++      pnob->num_vlans--;
++      be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
++                         pnob->vlan_tag, NULL, NULL, NULL);
++}
++
++/*
++ * This function is called to program multicast
++ * address in the multicast filter of the ASIC.
++ */
++static void be_set_multicast_filter(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct dev_mc_list *mc_ptr;
++      u8 mac_addr[32][ETH_ALEN];
++      int i;
++
++      if (netdev->flags & IFF_ALLMULTI) {
++              /* set BE in Multicast promiscuous */
++              be_rxf_multicast_config(&pnob->fn_obj, true, 0, NULL, NULL,
++                                      NULL, NULL);
++              return;
++      }
++
++      for (mc_ptr = netdev->mc_list, i = 0; mc_ptr;
++           mc_ptr = mc_ptr->next, i++) {
++              memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
++      }
++
++      /* reset the promiscuous mode also. */
++      be_rxf_multicast_config(&pnob->fn_obj, false, i,
++                              &mac_addr[0][0], NULL, NULL, NULL);
++}
++
++/*
++ * This is the driver entry point to set multicast list
++ * with the device netdev. This function will be used to
++ * set promiscuous mode or multicast promiscuous mode
++ * or multicast mode....
++ */
++static void benet_set_multicast_list(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++
++      if (netdev->flags & IFF_PROMISC) {
++              be_rxf_promiscuous(&pnob->fn_obj, 1, 1, NULL, NULL, NULL);
++      } else {
++              be_rxf_promiscuous(&pnob->fn_obj, 0, 0, NULL, NULL, NULL);
++              be_set_multicast_filter(netdev);
++      }
++}
++
++int benet_init(struct net_device *netdev)
++{
++      struct be_net_object *pnob = netdev_priv(netdev);
++      struct be_adapter *adapter = pnob->adapter;
++
++      ether_setup(netdev);
++
++      netdev->open = &benet_open;
++      netdev->stop = &benet_close;
++      netdev->hard_start_xmit = &benet_xmit;
++
++      netdev->get_stats = &benet_get_stats;
++
++      netdev->set_multicast_list = &benet_set_multicast_list;
++
++      netdev->change_mtu = &benet_change_mtu;
++      netdev->set_mac_address = &benet_set_mac_addr;
++
++      netdev->vlan_rx_register = benet_vlan_register;
++      netdev->vlan_rx_add_vid = benet_vlan_add_vid;
++      netdev->vlan_rx_kill_vid = benet_vlan_rem_vid;
++
++      netdev->features =
++          NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
++          NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM;
++
++      netdev->flags |= IFF_MULTICAST;
++
++      /* If device is DAC Capable, set the HIGHDMA flag for netdevice. */
++      if (adapter->dma_64bit_cap)
++              netdev->features |= NETIF_F_HIGHDMA;
++
++      SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
++      return 0;
++}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/bestatus.h linux-2.6.29-rc3.owrt/drivers/staging/benet/bestatus.h
+--- linux-2.6.29.owrt/drivers/staging/benet/bestatus.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/bestatus.h     2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,103 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#ifndef _BESTATUS_H_
++#define _BESTATUS_H_
++
++#define BE_SUCCESS                      (0x00000000L)
++/*
++ * MessageId: BE_PENDING
++ *  The BladeEngine Driver call succeeded, and pended operation.
++ */
++#define BE_PENDING                       (0x20070001L)
++#define BE_STATUS_PENDING                (BE_PENDING)
++/*
++ * MessageId: BE_NOT_OK
++ *  An error occurred.
++ */
++#define BE_NOT_OK                        (0xE0070002L)
++/*
++ * MessageId: BE_STATUS_SYSTEM_RESOURCES
++ *  Insufficient host system resources exist to complete the API.
++ */
++#define BE_STATUS_SYSTEM_RESOURCES       (0xE0070003L)
++/*
++ * MessageId: BE_STATUS_CHIP_RESOURCES
++ *  Insufficient chip resources exist to complete the API.
++ */
++#define BE_STATUS_CHIP_RESOURCES         (0xE0070004L)
++/*
++ * MessageId: BE_STATUS_NO_RESOURCE
++ *  Insufficient resources to complete request.
++ */
++#define BE_STATUS_NO_RESOURCE            (0xE0070005L)
++/*
++ * MessageId: BE_STATUS_BUSY
++ *  Resource is currently busy.
++ */
++#define BE_STATUS_BUSY                   (0xE0070006L)
++/*
++ * MessageId: BE_STATUS_INVALID_PARAMETER
++ *  Invalid Parameter in request.
++ */
++#define BE_STATUS_INVALID_PARAMETER      (0xE0000007L)
++/*
++ * MessageId: BE_STATUS_NOT_SUPPORTED
++ *  Requested operation is not supported.
++ */
++#define BE_STATUS_NOT_SUPPORTED          (0xE000000DL)
++
++/*
++ * ***************************************************************************
++ *                     E T H E R N E T   S T A T U S
++ * ***************************************************************************
++ */
++
++/*
++ * MessageId: BE_ETH_TX_ERROR
++ *  The Ethernet device driver failed to transmit a packet.
++ */
++#define BE_ETH_TX_ERROR                  (0xE0070101L)
++
++/*
++ * ***************************************************************************
++ *                     S H A R E D   S T A T U S
++ * ***************************************************************************
++ */
++
++/*
++ * MessageId: BE_STATUS_VBD_INVALID_VERSION
++ *  The device driver is not compatible with this version of the VBD.
++ */
++#define BE_STATUS_INVALID_VERSION    (0xE0070402L)
++/*
++ * MessageId: BE_STATUS_DOMAIN_DENIED
++ *  The operation failed to complete due to insufficient access
++ *  rights for the requesting domain.
++ */
++#define BE_STATUS_DOMAIN_DENIED          (0xE0070403L)
++/*
++ * MessageId: BE_STATUS_TCP_NOT_STARTED
++ *  The embedded TCP/IP stack has not been started.
++ */
++#define BE_STATUS_TCP_NOT_STARTED        (0xE0070409L)
++/*
++ * MessageId: BE_STATUS_NO_MCC_WRB
++ *  No free MCC WRB are available for posting the request.
++ */
++#define BE_STATUS_NO_MCC_WRB                 (0xE0070414L)
++
++#endif /* _BESTATUS_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/cev.h linux-2.6.29-rc3.owrt/drivers/staging/benet/cev.h
+--- linux-2.6.29.owrt/drivers/staging/benet/cev.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/cev.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,243 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __cev_amap_h__
++#define __cev_amap_h__
++#include "ep.h"
++
++/*
++ * Host Interrupt Status Register 0. The first of four application
++ * interrupt status registers. This register contains the interrupts
++ * for Event Queues EQ0 through EQ31.
++ */
++struct BE_CEV_ISR0_CSR_AMAP {
++      u8 interrupt0;  /* DWORD 0 */
++      u8 interrupt1;  /* DWORD 0 */
++      u8 interrupt2;  /* DWORD 0 */
++      u8 interrupt3;  /* DWORD 0 */
++      u8 interrupt4;  /* DWORD 0 */
++      u8 interrupt5;  /* DWORD 0 */
++      u8 interrupt6;  /* DWORD 0 */
++      u8 interrupt7;  /* DWORD 0 */
++      u8 interrupt8;  /* DWORD 0 */
++      u8 interrupt9;  /* DWORD 0 */
++      u8 interrupt10; /* DWORD 0 */
++      u8 interrupt11; /* DWORD 0 */
++      u8 interrupt12; /* DWORD 0 */
++      u8 interrupt13; /* DWORD 0 */
++      u8 interrupt14; /* DWORD 0 */
++      u8 interrupt15; /* DWORD 0 */
++      u8 interrupt16; /* DWORD 0 */
++      u8 interrupt17; /* DWORD 0 */
++      u8 interrupt18; /* DWORD 0 */
++      u8 interrupt19; /* DWORD 0 */
++      u8 interrupt20; /* DWORD 0 */
++      u8 interrupt21; /* DWORD 0 */
++      u8 interrupt22; /* DWORD 0 */
++      u8 interrupt23; /* DWORD 0 */
++      u8 interrupt24; /* DWORD 0 */
++      u8 interrupt25; /* DWORD 0 */
++      u8 interrupt26; /* DWORD 0 */
++      u8 interrupt27; /* DWORD 0 */
++      u8 interrupt28; /* DWORD 0 */
++      u8 interrupt29; /* DWORD 0 */
++      u8 interrupt30; /* DWORD 0 */
++      u8 interrupt31; /* DWORD 0 */
++} __packed;
++struct CEV_ISR0_CSR_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Host Interrupt Status Register 1. The second of four application
++ * interrupt status registers. This register contains the interrupts
++ * for Event Queues EQ32 through EQ63.
++ */
++struct BE_CEV_ISR1_CSR_AMAP {
++      u8 interrupt32; /* DWORD 0 */
++      u8 interrupt33; /* DWORD 0 */
++      u8 interrupt34; /* DWORD 0 */
++      u8 interrupt35; /* DWORD 0 */
++      u8 interrupt36; /* DWORD 0 */
++      u8 interrupt37; /* DWORD 0 */
++      u8 interrupt38; /* DWORD 0 */
++      u8 interrupt39; /* DWORD 0 */
++      u8 interrupt40; /* DWORD 0 */
++      u8 interrupt41; /* DWORD 0 */
++      u8 interrupt42; /* DWORD 0 */
++      u8 interrupt43; /* DWORD 0 */
++      u8 interrupt44; /* DWORD 0 */
++      u8 interrupt45; /* DWORD 0 */
++      u8 interrupt46; /* DWORD 0 */
++      u8 interrupt47; /* DWORD 0 */
++      u8 interrupt48; /* DWORD 0 */
++      u8 interrupt49; /* DWORD 0 */
++      u8 interrupt50; /* DWORD 0 */
++      u8 interrupt51; /* DWORD 0 */
++      u8 interrupt52; /* DWORD 0 */
++      u8 interrupt53; /* DWORD 0 */
++      u8 interrupt54; /* DWORD 0 */
++      u8 interrupt55; /* DWORD 0 */
++      u8 interrupt56; /* DWORD 0 */
++      u8 interrupt57; /* DWORD 0 */
++      u8 interrupt58; /* DWORD 0 */
++      u8 interrupt59; /* DWORD 0 */
++      u8 interrupt60; /* DWORD 0 */
++      u8 interrupt61; /* DWORD 0 */
++      u8 interrupt62; /* DWORD 0 */
++      u8 interrupt63; /* DWORD 0 */
++} __packed;
++struct CEV_ISR1_CSR_AMAP {
++      u32 dw[1];
++};
++/*
++ * Host Interrupt Status Register 2. The third of four application
++ * interrupt status registers. This register contains the interrupts
++ * for Event Queues EQ64 through EQ95.
++ */
++struct BE_CEV_ISR2_CSR_AMAP {
++      u8 interrupt64; /* DWORD 0 */
++      u8 interrupt65; /* DWORD 0 */
++      u8 interrupt66; /* DWORD 0 */
++      u8 interrupt67; /* DWORD 0 */
++      u8 interrupt68; /* DWORD 0 */
++      u8 interrupt69; /* DWORD 0 */
++      u8 interrupt70; /* DWORD 0 */
++      u8 interrupt71; /* DWORD 0 */
++      u8 interrupt72; /* DWORD 0 */
++      u8 interrupt73; /* DWORD 0 */
++      u8 interrupt74; /* DWORD 0 */
++      u8 interrupt75; /* DWORD 0 */
++      u8 interrupt76; /* DWORD 0 */
++      u8 interrupt77; /* DWORD 0 */
++      u8 interrupt78; /* DWORD 0 */
++      u8 interrupt79; /* DWORD 0 */
++      u8 interrupt80; /* DWORD 0 */
++      u8 interrupt81; /* DWORD 0 */
++      u8 interrupt82; /* DWORD 0 */
++      u8 interrupt83; /* DWORD 0 */
++      u8 interrupt84; /* DWORD 0 */
++      u8 interrupt85; /* DWORD 0 */
++      u8 interrupt86; /* DWORD 0 */
++      u8 interrupt87; /* DWORD 0 */
++      u8 interrupt88; /* DWORD 0 */
++      u8 interrupt89; /* DWORD 0 */
++      u8 interrupt90; /* DWORD 0 */
++      u8 interrupt91; /* DWORD 0 */
++      u8 interrupt92; /* DWORD 0 */
++      u8 interrupt93; /* DWORD 0 */
++      u8 interrupt94; /* DWORD 0 */
++      u8 interrupt95; /* DWORD 0 */
++} __packed;
++struct CEV_ISR2_CSR_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Host Interrupt Status Register 3. The fourth of four application
++ * interrupt status registers. This register contains the interrupts
++ * for Event Queues EQ96 through EQ127.
++ */
++struct BE_CEV_ISR3_CSR_AMAP {
++      u8 interrupt96; /* DWORD 0 */
++      u8 interrupt97; /* DWORD 0 */
++      u8 interrupt98; /* DWORD 0 */
++      u8 interrupt99; /* DWORD 0 */
++      u8 interrupt100;        /* DWORD 0 */
++      u8 interrupt101;        /* DWORD 0 */
++      u8 interrupt102;        /* DWORD 0 */
++      u8 interrupt103;        /* DWORD 0 */
++      u8 interrupt104;        /* DWORD 0 */
++      u8 interrupt105;        /* DWORD 0 */
++      u8 interrupt106;        /* DWORD 0 */
++      u8 interrupt107;        /* DWORD 0 */
++      u8 interrupt108;        /* DWORD 0 */
++      u8 interrupt109;        /* DWORD 0 */
++      u8 interrupt110;        /* DWORD 0 */
++      u8 interrupt111;        /* DWORD 0 */
++      u8 interrupt112;        /* DWORD 0 */
++      u8 interrupt113;        /* DWORD 0 */
++      u8 interrupt114;        /* DWORD 0 */
++      u8 interrupt115;        /* DWORD 0 */
++      u8 interrupt116;        /* DWORD 0 */
++      u8 interrupt117;        /* DWORD 0 */
++      u8 interrupt118;        /* DWORD 0 */
++      u8 interrupt119;        /* DWORD 0 */
++      u8 interrupt120;        /* DWORD 0 */
++      u8 interrupt121;        /* DWORD 0 */
++      u8 interrupt122;        /* DWORD 0 */
++      u8 interrupt123;        /* DWORD 0 */
++      u8 interrupt124;        /* DWORD 0 */
++      u8 interrupt125;        /* DWORD 0 */
++      u8 interrupt126;        /* DWORD 0 */
++      u8 interrupt127;        /* DWORD 0 */
++} __packed;
++struct CEV_ISR3_CSR_AMAP {
++      u32 dw[1];
++};
++
++/*  Completions and Events block Registers.  */
++struct BE_CEV_CSRMAP_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[32];   /* DWORD 1 */
++      u8 rsvd2[32];   /* DWORD 2 */
++      u8 rsvd3[32];   /* DWORD 3 */
++      struct BE_CEV_ISR0_CSR_AMAP isr0;
++      struct BE_CEV_ISR1_CSR_AMAP isr1;
++      struct BE_CEV_ISR2_CSR_AMAP isr2;
++      struct BE_CEV_ISR3_CSR_AMAP isr3;
++      u8 rsvd4[32];   /* DWORD 8 */
++      u8 rsvd5[32];   /* DWORD 9 */
++      u8 rsvd6[32];   /* DWORD 10 */
++      u8 rsvd7[32];   /* DWORD 11 */
++      u8 rsvd8[32];   /* DWORD 12 */
++      u8 rsvd9[32];   /* DWORD 13 */
++      u8 rsvd10[32];  /* DWORD 14 */
++      u8 rsvd11[32];  /* DWORD 15 */
++      u8 rsvd12[32];  /* DWORD 16 */
++      u8 rsvd13[32];  /* DWORD 17 */
++      u8 rsvd14[32];  /* DWORD 18 */
++      u8 rsvd15[32];  /* DWORD 19 */
++      u8 rsvd16[32];  /* DWORD 20 */
++      u8 rsvd17[32];  /* DWORD 21 */
++      u8 rsvd18[32];  /* DWORD 22 */
++      u8 rsvd19[32];  /* DWORD 23 */
++      u8 rsvd20[32];  /* DWORD 24 */
++      u8 rsvd21[32];  /* DWORD 25 */
++      u8 rsvd22[32];  /* DWORD 26 */
++      u8 rsvd23[32];  /* DWORD 27 */
++      u8 rsvd24[32];  /* DWORD 28 */
++      u8 rsvd25[32];  /* DWORD 29 */
++      u8 rsvd26[32];  /* DWORD 30 */
++      u8 rsvd27[32];  /* DWORD 31 */
++      u8 rsvd28[32];  /* DWORD 32 */
++      u8 rsvd29[32];  /* DWORD 33 */
++      u8 rsvd30[192]; /* DWORD 34 */
++      u8 rsvd31[192]; /* DWORD 40 */
++      u8 rsvd32[160]; /* DWORD 46 */
++      u8 rsvd33[160]; /* DWORD 51 */
++      u8 rsvd34[160]; /* DWORD 56 */
++      u8 rsvd35[96];  /* DWORD 61 */
++      u8 rsvd36[192][32];     /* DWORD 64 */
++} __packed;
++struct CEV_CSRMAP_AMAP {
++      u32 dw[256];
++};
++
++#endif /* __cev_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/cq.c linux-2.6.29-rc3.owrt/drivers/staging/benet/cq.c
+--- linux-2.6.29.owrt/drivers/staging/benet/cq.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/cq.c   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,211 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include "hwlib.h"
++#include "bestatus.h"
++
++/*
++ * Completion Queue Objects
++ */
++/*
++ *============================================================================
++ *                  P U B L I C  R O U T I N E S
++ *============================================================================
++ */
++
++/*
++    This routine creates a completion queue based on the client completion
++    queue configuration information.
++
++
++    FunctionObject      - Handle to a function object
++    CqBaseVa            - Base VA for a the CQ ring
++    NumEntries          - CEV_CQ_CNT_* values
++    solEventEnable      - 0 = All CQEs can generate Events if CQ is eventable
++                      1 = only CQEs with solicited bit set are eventable
++    eventable           - Eventable CQ, generates interrupts.
++    nodelay             - 1 = Force interrupt, relevent if CQ eventable.
++                      Interrupt is asserted immediately after EQE
++                      write is confirmed, regardless of EQ Timer
++                      or watermark settings.
++    wme                 - Enable watermark based coalescing
++    wmThresh            - High watermark(CQ fullness at which event
++                      or interrupt should be asserted).  These are the
++                      CEV_WATERMARK encoded values.
++    EqObject            - EQ Handle to assign to this CQ
++    ppCqObject          - Internal CQ Handle returned.
++
++    Returns BE_SUCCESS if successfull, otherwise a useful error code is
++      returned.
++
++    IRQL < DISPATCH_LEVEL
++
++*/
++int be_cq_create(struct be_function_object *pfob,
++      struct ring_desc *rd, u32 length, bool solicited_eventable,
++      bool no_delay, u32 wm_thresh,
++      struct be_eq_object *eq_object, struct be_cq_object *cq_object)
++{
++      int status = BE_SUCCESS;
++      u32 num_entries_encoding;
++      u32 num_entries = length / sizeof(struct MCC_CQ_ENTRY_AMAP);
++      struct FWCMD_COMMON_CQ_CREATE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      u32 n;
++      unsigned long irql;
++
++      ASSERT(rd);
++      ASSERT(cq_object);
++      ASSERT(length % sizeof(struct MCC_CQ_ENTRY_AMAP) == 0);
++
++      switch (num_entries) {
++      case 256:
++              num_entries_encoding = CEV_CQ_CNT_256;
++              break;
++      case 512:
++              num_entries_encoding = CEV_CQ_CNT_512;
++              break;
++      case 1024:
++              num_entries_encoding = CEV_CQ_CNT_1024;
++              break;
++      default:
++              ASSERT(0);
++              return BE_STATUS_INVALID_PARAMETER;
++      }
++
++      /*
++       * All cq entries all the same size.  Use iSCSI version
++       * as a test for the proper rd length.
++       */
++      memset(cq_object, 0, sizeof(*cq_object));
++
++      atomic_set(&cq_object->ref_count, 0);
++      cq_object->parent_function = pfob;
++      cq_object->eq_object = eq_object;
++      cq_object->num_entries = num_entries;
++      /* save for MCC cq processing */
++      cq_object->va = rd->va;
++
++      /* map into UT. */
++      length = num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_CQ_CREATE);
++
++      fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
++                                                                      length);
++
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
++      n = pfob->pci_function_number;
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, Func, &fwcmd->params.request.context, n);
++
++      n = (eq_object != NULL);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, Eventable,
++                              &fwcmd->params.request.context, n);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, Armed, &fwcmd->params.request.context, 1);
++
++      n = eq_object ? eq_object->eq_id : 0;
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, EQID, &fwcmd->params.request.context, n);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, Count,
++                      &fwcmd->params.request.context, num_entries_encoding);
++
++      n = 0; /* Protection Domain is always 0 in  Linux  driver */
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, PD, &fwcmd->params.request.context, n);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, NoDelay,
++                              &fwcmd->params.request.context, no_delay);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, SolEvent,
++                      &fwcmd->params.request.context, solicited_eventable);
++
++      n = (wm_thresh != 0xFFFFFFFF);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, WME, &fwcmd->params.request.context, n);
++
++      n = (n ? wm_thresh : 0);
++      AMAP_SET_BITS_PTR(CQ_CONTEXT, Watermark,
++                              &fwcmd->params.request.context, n);
++      /* Create a page list for the FWCMD. */
++      be_rd_to_pa_list(rd, fwcmd->params.request.pages,
++                        ARRAY_SIZE(fwcmd->params.request.pages));
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                      NULL, NULL, fwcmd, NULL);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "MCC to create CQ failed.");
++              goto Error;
++      }
++      /* Remember the CQ id. */
++      cq_object->cq_id = fwcmd->params.response.cq_id;
++
++      /* insert this cq into eq_object reference */
++      if (eq_object) {
++              atomic_inc(&eq_object->ref_count);
++              list_add_tail(&cq_object->cqlist_for_eq,
++                                      &eq_object->cq_list_head);
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++
++    Deferences the given object. Once the object's reference count drops to
++    zero, the object is destroyed and all resources that are held by this object
++    are released.  The on-chip context is also destroyed along with the queue
++    ID, and any mappings made into the UT.
++
++    cq_object            - CQ handle returned from cq_object_create.
++
++    returns the current reference count on the object
++
++    IRQL: IRQL < DISPATCH_LEVEL
++*/
++int be_cq_destroy(struct be_cq_object *cq_object)
++{
++      int status = 0;
++
++      /* Nothing should reference this CQ at this point. */
++      ASSERT(atomic_read(&cq_object->ref_count) == 0);
++
++      /* Send fwcmd to destroy the CQ. */
++      status = be_function_ring_destroy(cq_object->parent_function,
++                   cq_object->cq_id, FWCMD_RING_TYPE_CQ,
++                                      NULL, NULL, NULL, NULL);
++      ASSERT(status == 0);
++
++      /* Remove reference if this is an eventable CQ. */
++      if (cq_object->eq_object) {
++              atomic_dec(&cq_object->eq_object->ref_count);
++              list_del(&cq_object->cqlist_for_eq);
++      }
++      return BE_SUCCESS;
++}
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/descriptors.h linux-2.6.29-rc3.owrt/drivers/staging/benet/descriptors.h
+--- linux-2.6.29.owrt/drivers/staging/benet/descriptors.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/descriptors.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,71 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __descriptors_amap_h__
++#define __descriptors_amap_h__
++
++/*
++ * --- IPC_NODE_ID_ENUM ---
++ * IPC processor id values
++ */
++#define TPOST_NODE_ID                   (0)   /* TPOST ID */
++#define TPRE_NODE_ID                    (1)   /* TPRE ID */
++#define TXULP0_NODE_ID                  (2)   /* TXULP0 ID */
++#define TXULP1_NODE_ID                  (3)   /* TXULP1 ID */
++#define TXULP2_NODE_ID                  (4)   /* TXULP2 ID */
++#define RXULP0_NODE_ID                  (5)   /* RXULP0 ID */
++#define RXULP1_NODE_ID                  (6)   /* RXULP1 ID */
++#define RXULP2_NODE_ID                  (7)   /* RXULP2 ID */
++#define MPU_NODE_ID                     (15)  /* MPU ID */
++
++/*
++ * --- MAC_ID_ENUM ---
++ * Meaning of the mac_id field in rxpp_eth_d
++ */
++#define PORT0_HOST_MAC0    (0)  /* PD 0, Port 0, host networking, MAC 0. */
++#define PORT0_HOST_MAC1    (1)        /* PD 0, Port 0, host networking, MAC 1. */
++#define PORT0_STORAGE_MAC0 (2)        /* PD 0, Port 0, host storage, MAC 0. */
++#define PORT0_STORAGE_MAC1 (3)        /* PD 0, Port 0, host storage, MAC 1. */
++#define PORT1_HOST_MAC0    (4)        /* PD 0, Port 1 host networking, MAC 0. */
++#define PORT1_HOST_MAC1    (5)        /* PD 0, Port 1 host networking, MAC 1. */
++#define PORT1_STORAGE_MAC0 (6)        /* PD 0, Port 1 host storage, MAC 0. */
++#define PORT1_STORAGE_MAC1 (7)        /* PD 0, Port 1 host storage, MAC 1. */
++#define FIRST_VM_MAC       (8)        /* PD 1 MAC. Protection domains have IDs */
++                              /* from 0x8-0x26, one per PD. */
++#define LAST_VM_MAC        (38)       /* PD 31 MAC. */
++#define MGMT_MAC           (39)       /* Management port MAC. */
++#define MARBLE_MAC0        (59)       /* Used for flushing function 0 receive */
++                                /*
++                                 * queues before re-using a torn-down
++                                 * receive ring. the DA =
++                                 * 00-00-00-00-00-00, and the MSB of the
++                                 * SA = 00
++                                 */
++#define MARBLE_MAC1        (60)       /* Used for flushing function 1 receive */
++                                /*
++                                 * queues before re-using a torn-down
++                                 * receive ring. the DA =
++                                 * 00-00-00-00-00-00, and the MSB of the
++                                 * SA != 00
++                                 */
++#define NULL_MAC           (61)       /* Promiscuous mode, indicates no match */
++#define MCAST_MAC          (62)       /* Multicast match. */
++#define BCAST_MATCH        (63)       /* Broadcast match. */
++
++#endif /* __descriptors_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/doorbells.h linux-2.6.29-rc3.owrt/drivers/staging/benet/doorbells.h
+--- linux-2.6.29.owrt/drivers/staging/benet/doorbells.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/doorbells.h    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,179 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __doorbells_amap_h__
++#define __doorbells_amap_h__
++
++/* The TX/RDMA send queue doorbell. */
++struct BE_SQ_DB_AMAP {
++      u8 cid[11];             /* DWORD 0 */
++      u8 rsvd0[5];    /* DWORD 0 */
++      u8 numPosted[14];       /* DWORD 0 */
++      u8 rsvd1[2];    /* DWORD 0 */
++} __packed;
++struct SQ_DB_AMAP {
++      u32 dw[1];
++};
++
++/* The receive queue doorbell. */
++struct BE_RQ_DB_AMAP {
++      u8 rq[10];              /* DWORD 0 */
++      u8 rsvd0[13];   /* DWORD 0 */
++      u8 Invalidate;  /* DWORD 0 */
++      u8 numPosted[8];        /* DWORD 0 */
++} __packed;
++struct RQ_DB_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * The CQ/EQ doorbell. Software MUST set reserved fields in this
++ * descriptor to zero, otherwise (CEV) hardware will not execute the
++ * doorbell (flagging a bad_db_qid error instead).
++ */
++struct BE_CQ_DB_AMAP {
++      u8 qid[10];             /* DWORD 0 */
++      u8 rsvd0[4];    /* DWORD 0 */
++      u8 rearm;               /* DWORD 0 */
++      u8 event;               /* DWORD 0 */
++      u8 num_popped[13];      /* DWORD 0 */
++      u8 rsvd1[3];    /* DWORD 0 */
++} __packed;
++struct CQ_DB_AMAP {
++      u32 dw[1];
++};
++
++struct BE_TPM_RQ_DB_AMAP {
++      u8 qid[10];             /* DWORD 0 */
++      u8 rsvd0[6];    /* DWORD 0 */
++      u8 numPosted[11];       /* DWORD 0 */
++      u8 mss_cnt[5];  /* DWORD 0 */
++} __packed;
++struct TPM_RQ_DB_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Post WRB Queue Doorbell Register used by the host Storage stack
++ * to notify the controller of a posted Work Request Block
++ */
++struct BE_WRB_POST_DB_AMAP {
++      u8 wrb_cid[10]; /* DWORD 0 */
++      u8 rsvd0[6];    /* DWORD 0 */
++      u8 wrb_index[8];        /* DWORD 0 */
++      u8 numberPosted[8];     /* DWORD 0 */
++} __packed;
++struct WRB_POST_DB_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Update Default PDU Queue Doorbell Register used to communicate
++ * to the controller that the driver has stopped processing the queue
++ * and where in the queue it stopped, this is
++ * a CQ Entry Type. Used by storage driver.
++ */
++struct BE_DEFAULT_PDU_DB_AMAP {
++      u8 qid[10];             /* DWORD 0 */
++      u8 rsvd0[4];    /* DWORD 0 */
++      u8 rearm;               /* DWORD 0 */
++      u8 event;               /* DWORD 0 */
++      u8 cqproc[14];  /* DWORD 0 */
++      u8 rsvd1[2];    /* DWORD 0 */
++} __packed;
++struct DEFAULT_PDU_DB_AMAP {
++      u32 dw[1];
++};
++
++/* Management Command and Controller default fragment ring */
++struct BE_MCC_DB_AMAP {
++      u8 rid[11];             /* DWORD 0 */
++      u8 rsvd0[5];    /* DWORD 0 */
++      u8 numPosted[14];       /* DWORD 0 */
++      u8 rsvd1[2];    /* DWORD 0 */
++} __packed;
++struct MCC_DB_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * Used for bootstrapping the Host interface. This register is
++ * used for driver communication with the MPU when no MCC Rings exist.
++ * The software must write this register twice to post any MCC
++ * command. First, it writes the register with hi=1 and the upper bits of
++ * the  physical address for the MCC_MAILBOX structure.  Software must poll
++ * the ready bit until this is acknowledged.  Then, sotware writes the
++ * register with hi=0 with the lower bits in the address.  It must
++ * poll the ready bit until the MCC command is complete.  Upon completion,
++ * the MCC_MAILBOX will contain a valid completion queue  entry.
++ */
++struct BE_MPU_MAILBOX_DB_AMAP {
++      u8 ready;               /* DWORD 0 */
++      u8 hi;          /* DWORD 0 */
++      u8 address[30]; /* DWORD 0 */
++} __packed;
++struct MPU_MAILBOX_DB_AMAP {
++      u32 dw[1];
++};
++
++/*
++ *  This is the protection domain doorbell register map. Note that
++ *  while this map shows doorbells for all Blade Engine supported
++ *  protocols, not all of these may be valid in a given function or
++ *  protection domain. It is the responsibility of the application
++ *  accessing the doorbells to know which are valid. Each doorbell
++ *  occupies 32 bytes of space, but unless otherwise specified,
++ *  only the first 4 bytes should be written.  There are 32 instances
++ *  of these doorbells for the host and 31 virtual machines respectively.
++ *  The host and VMs will only map the doorbell pages belonging to its
++ *  protection domain. It will not be able to touch the doorbells for
++ *  another VM. The doorbells are the only registers directly accessible
++ *  by a virtual machine. Similarly, there are 511 additional
++ *  doorbells for RDMA protection domains. PD 0 for RDMA shares
++ *  the same physical protection domain doorbell page as ETH/iSCSI.
++ *
++ */
++struct BE_PROTECTION_DOMAIN_DBMAP_AMAP {
++      u8 rsvd0[512];  /* DWORD 0 */
++      struct BE_SQ_DB_AMAP rdma_sq_db;
++      u8 rsvd1[7][32];        /* DWORD 17 */
++      struct BE_WRB_POST_DB_AMAP iscsi_wrb_post_db;
++      u8 rsvd2[7][32];        /* DWORD 25 */
++      struct BE_SQ_DB_AMAP etx_sq_db;
++      u8 rsvd3[7][32];        /* DWORD 33 */
++      struct BE_RQ_DB_AMAP rdma_rq_db;
++      u8 rsvd4[7][32];        /* DWORD 41 */
++      struct BE_DEFAULT_PDU_DB_AMAP iscsi_default_pdu_db;
++      u8 rsvd5[7][32];        /* DWORD 49 */
++      struct BE_TPM_RQ_DB_AMAP tpm_rq_db;
++      u8 rsvd6[7][32];        /* DWORD 57 */
++      struct BE_RQ_DB_AMAP erx_rq_db;
++      u8 rsvd7[7][32];        /* DWORD 65 */
++      struct BE_CQ_DB_AMAP cq_db;
++      u8 rsvd8[7][32];        /* DWORD 73 */
++      struct BE_MCC_DB_AMAP mpu_mcc_db;
++      u8 rsvd9[7][32];        /* DWORD 81 */
++      struct BE_MPU_MAILBOX_DB_AMAP mcc_bootstrap_db;
++      u8 rsvd10[935][32];     /* DWORD 89 */
++} __packed;
++struct PROTECTION_DOMAIN_DBMAP_AMAP {
++      u32 dw[1024];
++};
++
++#endif /* __doorbells_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/ep.h linux-2.6.29-rc3.owrt/drivers/staging/benet/ep.h
+--- linux-2.6.29.owrt/drivers/staging/benet/ep.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/ep.h   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,66 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __ep_amap_h__
++#define __ep_amap_h__
++
++/* General Control and Status Register. */
++struct BE_EP_CONTROL_CSR_AMAP {
++      u8 m0_RxPbuf;   /* DWORD 0 */
++      u8 m1_RxPbuf;   /* DWORD 0 */
++      u8 m2_RxPbuf;   /* DWORD 0 */
++      u8 ff_en;               /* DWORD 0 */
++      u8 rsvd0[27];   /* DWORD 0 */
++      u8 CPU_reset;   /* DWORD 0 */
++} __packed;
++struct EP_CONTROL_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Semaphore Register. */
++struct BE_EP_SEMAPHORE_CSR_AMAP {
++      u8 value[32];   /* DWORD 0 */
++} __packed;
++struct EP_SEMAPHORE_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Embedded Processor Specific Registers. */
++struct BE_EP_CSRMAP_AMAP {
++      struct BE_EP_CONTROL_CSR_AMAP ep_control;
++      u8 rsvd0[32];   /* DWORD 1 */
++      u8 rsvd1[32];   /* DWORD 2 */
++      u8 rsvd2[32];   /* DWORD 3 */
++      u8 rsvd3[32];   /* DWORD 4 */
++      u8 rsvd4[32];   /* DWORD 5 */
++      u8 rsvd5[8][128];       /* DWORD 6 */
++      u8 rsvd6[32];   /* DWORD 38 */
++      u8 rsvd7[32];   /* DWORD 39 */
++      u8 rsvd8[32];   /* DWORD 40 */
++      u8 rsvd9[32];   /* DWORD 41 */
++      u8 rsvd10[32];  /* DWORD 42 */
++      struct BE_EP_SEMAPHORE_CSR_AMAP ep_semaphore;
++      u8 rsvd11[32];  /* DWORD 44 */
++      u8 rsvd12[19][32];      /* DWORD 45 */
++} __packed;
++struct EP_CSRMAP_AMAP {
++      u32 dw[64];
++};
++
++#endif /* __ep_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/eq.c linux-2.6.29-rc3.owrt/drivers/staging/benet/eq.c
+--- linux-2.6.29.owrt/drivers/staging/benet/eq.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/eq.c   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,299 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include "hwlib.h"
++#include "bestatus.h"
++/*
++    This routine creates an event queue based on the client completion
++    queue configuration information.
++
++    FunctionObject      - Handle to a function object
++    EqBaseVa            - Base VA for a the EQ ring
++    SizeEncoding        - The encoded size for the EQ entries. This value is
++                      either CEV_EQ_SIZE_4 or CEV_EQ_SIZE_16
++    NumEntries          - CEV_CQ_CNT_* values.
++    Watermark           - Enables watermark based coalescing.  This parameter
++                      must be of the type CEV_WMARK_* if watermarks
++                      are enabled.  If watermarks to to be disabled
++                      this value should be-1.
++    TimerDelay          - If a timer delay is enabled this value should be the
++                      time of the delay in 8 microsecond units.  If
++                      delays are not used this parameter should be
++                      set to -1.
++    ppEqObject          - Internal EQ Handle returned.
++
++    Returns BE_SUCCESS if successfull,, otherwise a useful error code
++      is returned.
++
++    IRQL < DISPATCH_LEVEL
++*/
++int
++be_eq_create(struct be_function_object *pfob,
++              struct ring_desc *rd, u32 eqe_size, u32 num_entries,
++              u32 watermark,  /* CEV_WMARK_* or -1 */
++              u32 timer_delay,        /* in 8us units, or -1 */
++              struct be_eq_object *eq_object)
++{
++      int status = BE_SUCCESS;
++      u32 num_entries_encoding, eqe_size_encoding, length;
++      struct FWCMD_COMMON_EQ_CREATE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      u32 n;
++      unsigned long irql;
++
++      ASSERT(rd);
++      ASSERT(eq_object);
++
++      switch (num_entries) {
++      case 256:
++              num_entries_encoding = CEV_EQ_CNT_256;
++              break;
++      case 512:
++              num_entries_encoding = CEV_EQ_CNT_512;
++              break;
++      case 1024:
++              num_entries_encoding = CEV_EQ_CNT_1024;
++              break;
++      case 2048:
++              num_entries_encoding = CEV_EQ_CNT_2048;
++              break;
++      case 4096:
++              num_entries_encoding = CEV_EQ_CNT_4096;
++              break;
++      default:
++              ASSERT(0);
++              return BE_STATUS_INVALID_PARAMETER;
++      }
++
++      switch (eqe_size) {
++      case 4:
++              eqe_size_encoding = CEV_EQ_SIZE_4;
++              break;
++      case 16:
++              eqe_size_encoding = CEV_EQ_SIZE_16;
++              break;
++      default:
++              ASSERT(0);
++              return BE_STATUS_INVALID_PARAMETER;
++      }
++
++      if ((eqe_size == 4 && num_entries < 1024) ||
++          (eqe_size == 16 && num_entries == 4096)) {
++              TRACE(DL_ERR, "Bad EQ size. eqe_size:%d num_entries:%d",
++                    eqe_size, num_entries);
++              ASSERT(0);
++              return BE_STATUS_INVALID_PARAMETER;
++      }
++
++      memset(eq_object, 0, sizeof(*eq_object));
++
++      atomic_set(&eq_object->ref_count, 0);
++      eq_object->parent_function = pfob;
++      eq_object->eq_id = 0xFFFFFFFF;
++
++      INIT_LIST_HEAD(&eq_object->cq_list_head);
++
++      length = num_entries * eqe_size;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_EQ_CREATE);
++
++      fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
++                                                                      length);
++      n = pfob->pci_function_number;
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, Func, &fwcmd->params.request.context, n);
++
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
++
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, Size,
++                      &fwcmd->params.request.context, eqe_size_encoding);
++
++      n = 0; /* Protection Domain is always 0 in  Linux  driver */
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, PD, &fwcmd->params.request.context, n);
++
++      /* Let the caller ARM the EQ with the doorbell. */
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, Armed, &fwcmd->params.request.context, 0);
++
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, Count, &fwcmd->params.request.context,
++                                      num_entries_encoding);
++
++      n = pfob->pci_function_number * 32;
++      AMAP_SET_BITS_PTR(EQ_CONTEXT, EventVect,
++                              &fwcmd->params.request.context, n);
++      if (watermark != -1) {
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
++                              &fwcmd->params.request.context, 1);
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, Watermark,
++                              &fwcmd->params.request.context, watermark);
++              ASSERT(watermark <= CEV_WMARK_240);
++      } else
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
++                                      &fwcmd->params.request.context, 0);
++      if (timer_delay != -1) {
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
++                                      &fwcmd->params.request.context, 1);
++
++              ASSERT(timer_delay <= 250);     /* max value according to EAS */
++              timer_delay = min(timer_delay, (u32)250);
++
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, Delay,
++                              &fwcmd->params.request.context, timer_delay);
++      } else {
++              AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
++                              &fwcmd->params.request.context, 0);
++      }
++      /* Create a page list for the FWCMD. */
++      be_rd_to_pa_list(rd, fwcmd->params.request.pages,
++                        ARRAY_SIZE(fwcmd->params.request.pages));
++
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                      NULL, NULL, fwcmd, NULL);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "MCC to create EQ failed.");
++              goto Error;
++      }
++      /* Get the EQ id.  The MPU allocates the IDs. */
++      eq_object->eq_id = fwcmd->params.response.eq_id;
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    Deferences the given object. Once the object's reference count drops to
++    zero, the object is destroyed and all resources that are held by this
++    object are released.  The on-chip context is also destroyed along with
++    the queue ID, and any mappings made into the UT.
++
++    eq_object            - EQ handle returned from eq_object_create.
++
++    Returns BE_SUCCESS if successfull, otherwise a useful error code
++      is returned.
++
++    IRQL: IRQL < DISPATCH_LEVEL
++*/
++int be_eq_destroy(struct be_eq_object *eq_object)
++{
++      int status = 0;
++
++      ASSERT(atomic_read(&eq_object->ref_count) == 0);
++      /* no CQs should reference this EQ now */
++      ASSERT(list_empty(&eq_object->cq_list_head));
++
++      /* Send fwcmd to destroy the EQ. */
++      status = be_function_ring_destroy(eq_object->parent_function,
++                           eq_object->eq_id, FWCMD_RING_TYPE_EQ,
++                                      NULL, NULL, NULL, NULL);
++      ASSERT(status == 0);
++
++      return BE_SUCCESS;
++}
++/*
++ *---------------------------------------------------------------------------
++ * Function: be_eq_modify_delay
++ *   Changes the EQ delay for a group of EQs.
++ * num_eq             - The number of EQs in the eq_array to adjust.
++ *                    This also is the number of delay values in
++ *                    the eq_delay_array.
++ * eq_array           - Array of struct be_eq_object pointers to adjust.
++ * eq_delay_array     - Array of "num_eq" timer delays in units
++ *                    of microseconds. The be_eq_query_delay_range
++ *                    fwcmd returns the resolution and range of
++ *                      legal EQ delays.
++ * cb           -
++ * cb_context   -
++ * q_ctxt             - Optional. Pointer to a previously allocated
++ *                    struct. If the MCC WRB ring is full, this
++ *                    structure is used to queue the operation. It
++ *                      will be posted to the MCC ring when space
++ *                      becomes available. All queued commands will
++ *                      be posted to the ring in the order they are
++ *                      received. It is always valid to pass a pointer to
++ *                      a generic be_generic_q_cntxt. However,
++ *                      the specific context structs
++ *                      are generally smaller than the generic struct.
++ * return pend_status - BE_SUCCESS (0) on success.
++ *                    BE_PENDING (postive value) if the FWCMD
++ *                      completion is pending. Negative error code on failure.
++ *-------------------------------------------------------------------------
++ */
++int
++be_eq_modify_delay(struct be_function_object *pfob,
++                 u32 num_eq, struct be_eq_object **eq_array,
++                 u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
++                 void *cb_context, struct be_eq_modify_delay_q_ctxt *q_ctxt)
++{
++      struct FWCMD_COMMON_MODIFY_EQ_DELAY *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      struct be_generic_q_ctxt *gen_ctxt = NULL;
++      u32 i;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      gen_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      gen_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MODIFY_EQ_DELAY);
++
++      ASSERT(num_eq > 0);
++      ASSERT(num_eq <= ARRAY_SIZE(fwcmd->params.request.delay));
++      fwcmd->params.request.num_eq = num_eq;
++      for (i = 0; i < num_eq; i++) {
++              fwcmd->params.request.delay[i].eq_id = eq_array[i]->eq_id;
++              fwcmd->params.request.delay[i].delay_in_microseconds =
++                  eq_delay_array[i];
++      }
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, gen_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, NULL);
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/eth.c linux-2.6.29-rc3.owrt/drivers/staging/benet/eth.c
+--- linux-2.6.29.owrt/drivers/staging/benet/eth.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/eth.c  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,1273 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include <linux/if_ether.h>
++#include "hwlib.h"
++#include "bestatus.h"
++
++/*
++ *---------------------------------------------------------
++ * Function: be_eth_sq_create_ex
++ *   Creates an ethernet send ring - extended version with
++ *   additional parameters.
++ * pfob -
++ * rd             - ring address
++ * length_in_bytes -
++ * type            - The type of ring to create.
++ * ulp             - The requested ULP number for the ring.
++ *                 This should be zero based, i.e. 0,1,2. This must
++ *                 be valid NIC ULP based on the firmware config.
++ *                   All doorbells for this ring must be sent to
++ *                   this ULP. The first network ring allocated for
++ *                   each ULP are higher performance than subsequent rings.
++ * cq_object       - cq object for completions
++ * ex_parameters   - Additional parameters (that may increase in
++ *                 future revisions). These parameters are only used
++ *                 for certain ring types -- see
++ *                   struct be_eth_sq_parameters for details.
++ * eth_sq          -
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *---------------------------------------------------------
++ */
++int
++be_eth_sq_create_ex(struct be_function_object *pfob, struct ring_desc *rd,
++              u32 length, u32 type, u32 ulp, struct be_cq_object *cq_object,
++              struct be_eth_sq_parameters *ex_parameters,
++              struct be_ethsq_object *eth_sq)
++{
++      struct FWCMD_COMMON_ETH_TX_CREATE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      u32 n;
++      unsigned long irql;
++
++      ASSERT(rd);
++      ASSERT(eth_sq);
++      ASSERT(ex_parameters);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      memset(eth_sq, 0, sizeof(*eth_sq));
++
++      eth_sq->parent_function = pfob;
++      eth_sq->bid = 0xFFFFFFFF;
++      eth_sq->cq_object = cq_object;
++
++      /* Translate hwlib interface to arm interface. */
++      switch (type) {
++      case BE_ETH_TX_RING_TYPE_FORWARDING:
++              type = ETH_TX_RING_TYPE_FORWARDING;
++              break;
++      case BE_ETH_TX_RING_TYPE_STANDARD:
++              type = ETH_TX_RING_TYPE_STANDARD;
++              break;
++      case BE_ETH_TX_RING_TYPE_BOUND:
++              ASSERT(ex_parameters->port < 2);
++              type = ETH_TX_RING_TYPE_BOUND;
++              break;
++      default:
++              TRACE(DL_ERR, "Invalid eth tx ring type:%d", type);
++              return BE_NOT_OK;
++              break;
++      }
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* NIC must be supported by the current config. */
++      ASSERT(pfob->fw_config.nic_ulp_mask);
++
++      /*
++       * The ulp parameter must select a valid NIC ULP
++       * for the current config.
++       */
++      ASSERT((1 << ulp) & pfob->fw_config.nic_ulp_mask);
++
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_TX_CREATE);
++      fwcmd->header.request.port_number = ex_parameters->port;
++
++      AMAP_SET_BITS_PTR(ETX_CONTEXT, pd_id,
++                              &fwcmd->params.request.context, 0);
++
++      n = be_ring_length_to_encoding(length, sizeof(struct ETH_WRB_AMAP));
++      AMAP_SET_BITS_PTR(ETX_CONTEXT, tx_ring_size,
++                                      &fwcmd->params.request.context, n);
++
++      AMAP_SET_BITS_PTR(ETX_CONTEXT, cq_id_send,
++                      &fwcmd->params.request.context, cq_object->cq_id);
++
++      n = pfob->pci_function_number;
++      AMAP_SET_BITS_PTR(ETX_CONTEXT, func, &fwcmd->params.request.context, n);
++
++      fwcmd->params.request.type = type;
++      fwcmd->params.request.ulp_num  = (1 << ulp);
++      fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
++      ASSERT(PAGES_SPANNED(rd->va, rd->length) >=
++                              fwcmd->params.request.num_pages);
++
++      /* Create a page list for the FWCMD. */
++      be_rd_to_pa_list(rd, fwcmd->params.request.pages,
++                        ARRAY_SIZE(fwcmd->params.request.pages));
++
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                      NULL, NULL, fwcmd, NULL);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "MCC to create etx queue failed.");
++              goto Error;
++      }
++      /* save the butler ID */
++      eth_sq->bid = fwcmd->params.response.cid;
++
++      /* add a reference to the corresponding CQ */
++      atomic_inc(&cq_object->ref_count);
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++
++/*
++    This routine destroys an ethernet send queue
++
++    EthSq - EthSq Handle returned from EthSqCreate
++
++    This function always return BE_SUCCESS.
++
++    This function frees memory allocated by EthSqCreate for the EthSq Object.
++
++*/
++int be_eth_sq_destroy(struct be_ethsq_object *eth_sq)
++{
++      int status = 0;
++
++      /* Send fwcmd to destroy the queue. */
++      status = be_function_ring_destroy(eth_sq->parent_function, eth_sq->bid,
++                   FWCMD_RING_TYPE_ETH_TX, NULL, NULL, NULL, NULL);
++      ASSERT(status == 0);
++
++      /* Derefence any associated CQs. */
++      atomic_dec(&eth_sq->cq_object->ref_count);
++      return status;
++}
++/*
++    This routine attempts to set the transmit flow control parameters.
++
++    FunctionObject      - Handle to a function object
++
++    txfc_enable         - transmit flow control enable - true for
++                        enable, false for disable
++
++    rxfc_enable         - receive flow control enable - true for
++                              enable, false for disable
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int error
++    code is returned.
++
++    IRQL: < DISPATCH_LEVEL
++
++    This function always fails in non-privileged machine context.
++*/
++int
++be_eth_set_flow_control(struct be_function_object *pfob,
++                      bool txfc_enable, bool rxfc_enable)
++{
++      struct FWCMD_COMMON_SET_FLOW_CONTROL *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FLOW_CONTROL);
++
++      fwcmd->params.request.rx_flow_control = rxfc_enable;
++      fwcmd->params.request.tx_flow_control = txfc_enable;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                      NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "set flow control fwcmd failed.");
++              goto error;
++      }
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine attempts to get the transmit flow control parameters.
++
++    pfob      - Handle to a function object
++
++    txfc_enable         - transmit flow control enable - true for
++                      enable, false for disable
++
++    rxfc_enable         - receive flow control enable - true for enable,
++                      false for disable
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int error code
++                      is returned.
++
++    IRQL: < DISPATCH_LEVEL
++
++    This function always fails in non-privileged machine context.
++*/
++int
++be_eth_get_flow_control(struct be_function_object *pfob,
++                      bool *txfc_enable, bool *rxfc_enable)
++{
++      struct FWCMD_COMMON_GET_FLOW_CONTROL *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FLOW_CONTROL);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                              NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "get flow control fwcmd failed.");
++              goto error;
++      }
++
++      *txfc_enable = fwcmd->params.response.tx_flow_control;
++      *rxfc_enable = fwcmd->params.response.rx_flow_control;
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++ *---------------------------------------------------------
++ * Function: be_eth_set_qos
++ *   This function sets the ethernet transmit Quality of Service (QoS)
++ *   characteristics of BladeEngine for the domain. All ethernet
++ *   transmit rings of the domain will evenly share the bandwidth.
++ *   The exeception to sharing is the host primary (super) ethernet
++ *   transmit ring as well as the host ethernet forwarding ring
++ *   for missed offload data.
++ * pfob -
++ * max_bps         - the maximum bits per second in units of
++ *                    10 Mbps (valid 0-100)
++ * max_pps         - the maximum packets per second in units
++ *                    of 1 Kpps (0 indicates no limit)
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *---------------------------------------------------------
++ */
++int
++be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps)
++{
++      struct FWCMD_COMMON_SET_QOS *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_QOS);
++
++      /* Set fields in fwcmd */
++      fwcmd->params.request.max_bits_per_second_NIC = max_bps;
++      fwcmd->params.request.max_packets_per_second_NIC = max_pps;
++      fwcmd->params.request.valid_flags = QOS_BITS_NIC | QOS_PKTS_NIC;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                      NULL, NULL, fwcmd, NULL);
++
++      if (status != 0)
++              TRACE(DL_ERR, "network set qos fwcmd failed.");
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++ *---------------------------------------------------------
++ * Function: be_eth_get_qos
++ *   This function retrieves the ethernet transmit Quality of Service (QoS)
++ *   characteristics for the domain.
++ * max_bps         - the maximum bits per second in units of
++ *                    10 Mbps (valid 0-100)
++ * max_pps         - the maximum packets per second in units of
++ *                    1 Kpps (0 indicates no limit)
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *---------------------------------------------------------
++ */
++int
++be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps)
++{
++      struct FWCMD_COMMON_GET_QOS *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_QOS);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                      NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "network get qos fwcmd failed.");
++              goto error;
++      }
++
++      *max_bps = fwcmd->params.response.max_bits_per_second_NIC;
++      *max_pps = fwcmd->params.response.max_packets_per_second_NIC;
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++ *---------------------------------------------------------
++ * Function: be_eth_set_frame_size
++ *   This function sets the ethernet maximum frame size. The previous
++ *   values are returned.
++ * pfob -
++ * tx_frame_size   - maximum transmit frame size in bytes
++ * rx_frame_size   - maximum receive frame size in bytes
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *---------------------------------------------------------
++ */
++int
++be_eth_set_frame_size(struct be_function_object *pfob,
++                    u32 *tx_frame_size, u32 *rx_frame_size)
++{
++      struct FWCMD_COMMON_SET_FRAME_SIZE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FRAME_SIZE);
++      fwcmd->params.request.max_tx_frame_size = *tx_frame_size;
++      fwcmd->params.request.max_rx_frame_size = *rx_frame_size;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                              NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "network set frame size fwcmd failed.");
++              goto error;
++      }
++
++      *tx_frame_size = fwcmd->params.response.chip_max_tx_frame_size;
++      *rx_frame_size = fwcmd->params.response.chip_max_rx_frame_size;
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++
++/*
++    This routine creates a Ethernet receive ring.
++
++    pfob      - handle to a function object
++    rq_base_va            - base VA for the default receive ring. this must be
++                      exactly 8K in length and continguous physical memory.
++    cq_object            - handle to a previously created CQ to be associated
++                      with the RQ.
++    pp_eth_rq             - pointer to an opqaue handle where an eth
++                      receive object is returned.
++    Returns BE_SUCCESS if successfull, , otherwise a useful
++    int error code is returned.
++
++    IRQL: < DISPATCH_LEVEL
++    this function allocates a struct be_ethrq_object *object.
++    there must be no more than 1 of these per function object, unless the
++    function object supports RSS (is networking and on the host).
++    the rq_base_va must point to a buffer of exactly 8K.
++    the erx::host_cqid (or host_stor_cqid) register and erx::ring_page registers
++    will be updated as appropriate on return
++*/
++int
++be_eth_rq_create(struct be_function_object *pfob,
++                      struct ring_desc *rd, struct be_cq_object *cq_object,
++                      struct be_cq_object *bcmc_cq_object,
++                      struct be_ethrq_object *eth_rq)
++{
++      int status = 0;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      struct FWCMD_COMMON_ETH_RX_CREATE *fwcmd = NULL;
++      unsigned long irql;
++
++      /* MPU will set the  */
++      ASSERT(rd);
++      ASSERT(eth_rq);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      eth_rq->parent_function = pfob;
++      eth_rq->cq_object = cq_object;
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_RX_CREATE);
++
++      fwcmd->params.request.num_pages = 2;    /* required length */
++      fwcmd->params.request.cq_id = cq_object->cq_id;
++
++      if (bcmc_cq_object)
++              fwcmd->params.request.bcmc_cq_id = bcmc_cq_object->cq_id;
++      else
++              fwcmd->params.request.bcmc_cq_id = 0xFFFF;
++
++      /* Create a page list for the FWCMD. */
++      be_rd_to_pa_list(rd, fwcmd->params.request.pages,
++                        ARRAY_SIZE(fwcmd->params.request.pages));
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                              NULL, NULL, fwcmd, NULL);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "fwcmd to map eth rxq frags failed.");
++              goto Error;
++      }
++      /* Save the ring ID for cleanup. */
++      eth_rq->rid = fwcmd->params.response.id;
++
++      atomic_inc(&cq_object->ref_count);
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine destroys an Ethernet receive queue
++
++    eth_rq - ethernet receive queue handle returned from eth_rq_create
++
++    Returns BE_SUCCESS on success and an appropriate int on failure.
++
++    This function frees resourcs allocated by EthRqCreate.
++    The erx::host_cqid (or host_stor_cqid) register and erx::ring_page
++    registers will be updated as appropriate on return
++    IRQL: < DISPATCH_LEVEL
++*/
++
++static void be_eth_rq_destroy_internal_cb(void *context, int status,
++                                       struct MCC_WRB_AMAP *wrb)
++{
++      struct be_ethrq_object *eth_rq = (struct be_ethrq_object *) context;
++
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "Destroy eth rq failed in internal callback.\n");
++      } else {
++              /* Dereference any CQs associated with this queue. */
++              atomic_dec(&eth_rq->cq_object->ref_count);
++      }
++
++      return;
++}
++
++int be_eth_rq_destroy(struct be_ethrq_object *eth_rq)
++{
++      int status = BE_SUCCESS;
++
++      /* Send fwcmd to destroy the RQ. */
++      status = be_function_ring_destroy(eth_rq->parent_function,
++                      eth_rq->rid, FWCMD_RING_TYPE_ETH_RX, NULL, NULL,
++                      be_eth_rq_destroy_internal_cb, eth_rq);
++
++      return status;
++}
++
++/*
++ *---------------------------------------------------------------------------
++ * Function: be_eth_rq_destroy_options
++ *   Destroys an ethernet receive ring with finer granularity options
++ *   than the standard be_eth_rq_destroy() API function.
++ * eth_rq           -
++ * flush            - Set to 1 to flush the ring, set to 0 to bypass the flush
++ * cb               - Callback function on completion
++ * cb_context       - Callback context
++ * return status    - BE_SUCCESS (0) on success. Negative error code on failure.
++ *----------------------------------------------------------------------------
++ */
++int
++be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
++              mcc_wrb_cqe_callback cb, void *cb_context)
++{
++      struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = BE_SUCCESS;
++      struct be_function_object *pfob = NULL;
++      unsigned long irql;
++
++      pfob = eth_rq->parent_function;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      TRACE(DL_INFO, "Destroy eth_rq ring id:%d, flush:%d", eth_rq->rid,
++            flush);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in destroy eth_rq ring.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
++
++      fwcmd->params.request.id = eth_rq->rid;
++      fwcmd->params.request.ring_type = FWCMD_RING_TYPE_ETH_RX;
++      fwcmd->params.request.bypass_flush = ((0 == flush) ? 1 : 0);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
++                      be_eth_rq_destroy_internal_cb, eth_rq, fwcmd, NULL);
++
++      if (status != BE_SUCCESS && status != BE_PENDING) {
++              TRACE(DL_ERR, "eth_rq ring destroy failed. id:%d, flush:%d",
++                    eth_rq->rid, flush);
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine queries the frag size for erx.
++
++    pfob      - handle to a function object
++
++    frag_size_bytes       - erx frag size in bytes that is/was set.
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int error
++    code is returned.
++
++    IRQL: < DISPATCH_LEVEL
++
++*/
++int
++be_eth_rq_get_frag_size(struct be_function_object *pfob, u32 *frag_size_bytes)
++{
++      struct FWCMD_ETH_GET_RX_FRAG_SIZE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      ASSERT(frag_size_bytes);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              return BE_STATUS_NO_MCC_WRB;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_GET_RX_FRAG_SIZE);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                              NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "get frag size fwcmd failed.");
++              goto error;
++      }
++
++      *frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine attempts to set the frag size for erx.  If the frag size is
++    already set, the attempt fails and the current frag size is returned.
++
++    pfob      - Handle to a function object
++
++    frag_size       - Erx frag size in bytes that is/was set.
++
++    current_frag_size_bytes    - Pointer to location where currrent frag
++                               is to be rturned
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int error
++    code is returned.
++
++    IRQL: < DISPATCH_LEVEL
++
++    This function always fails in non-privileged machine context.
++*/
++int
++be_eth_rq_set_frag_size(struct be_function_object *pfob,
++                      u32 frag_size, u32 *frag_size_bytes)
++{
++      struct FWCMD_ETH_SET_RX_FRAG_SIZE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      ASSERT(frag_size_bytes);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_SET_RX_FRAG_SIZE);
++
++      ASSERT(frag_size >= 128 && frag_size <= 16 * 1024);
++
++      /* This is the log2 of the fragsize.  This is not the exact
++       * ERX encoding. */
++      fwcmd->params.request.new_fragsize_log2 = __ilog2_u32(frag_size);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                              NULL, NULL, fwcmd, NULL);
++
++      if (status != 0) {
++              TRACE(DL_ERR, "set frag size fwcmd failed.");
++              goto error;
++      }
++
++      *frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++
++/*
++    This routine gets or sets a mac address for a domain
++    given the port and mac.
++
++    FunctionObject  - Function object handle.
++    port1           - Set to TRUE if this function will set/get the Port 1
++                      address.  Only the host may set this to TRUE.
++    mac1            - Set to TRUE if this function will set/get the
++                      MAC 1 address.  Only the host may set this to TRUE.
++    write           - Set to TRUE if this function should write the mac address.
++    mac_address      - Buffer of the mac address to read or write.
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
++
++    IRQL: < DISPATCH_LEVEL
++*/
++int be_rxf_mac_address_read_write(struct be_function_object *pfob,
++              bool port1,     /* VM must always set to false */
++              bool mac1,      /* VM must always set to false */
++              bool mgmt, bool write,
++              bool permanent, u8 *mac_address,
++              mcc_wrb_cqe_callback cb,        /* optional */
++              void *cb_context)       /* optional */
++{
++      int status = BE_SUCCESS;
++      union {
++              struct FWCMD_COMMON_NTWK_MAC_QUERY *query;
++              struct FWCMD_COMMON_NTWK_MAC_SET *set;
++      } fwcmd = {NULL};
++      struct MCC_WRB_AMAP *wrb = NULL;
++      u32 type = 0;
++      unsigned long irql;
++      struct be_mcc_wrb_response_copy rc;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      ASSERT(mac_address);
++
++      ASSERT(port1 == false);
++      ASSERT(mac1 == false);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++
++      if (mgmt) {
++              type = MAC_ADDRESS_TYPE_MANAGEMENT;
++      } else {
++              if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
++                      type = MAC_ADDRESS_TYPE_NETWORK;
++              else
++                      type = MAC_ADDRESS_TYPE_STORAGE;
++      }
++
++      if (write) {
++              /* Prepares an embedded fwcmd, including
++               * request/response sizes.
++               */
++              fwcmd.set = BE_PREPARE_EMBEDDED_FWCMD(pfob,
++                                             wrb, COMMON_NTWK_MAC_SET);
++
++              fwcmd.set->params.request.invalidate = 0;
++              fwcmd.set->params.request.mac1 = (mac1 ? 1 : 0);
++              fwcmd.set->params.request.port = (port1 ? 1 : 0);
++              fwcmd.set->params.request.type = type;
++
++              /* Copy the mac address to set. */
++              fwcmd.set->params.request.mac.SizeOfStructure =
++                          sizeof(fwcmd.set->params.request.mac);
++              memcpy(fwcmd.set->params.request.mac.MACAddress,
++                      mac_address, ETH_ALEN);
++
++              /* Post the f/w command */
++              status = be_function_post_mcc_wrb(pfob, wrb, NULL,
++                              cb, cb_context, NULL, NULL, fwcmd.set, NULL);
++
++      } else {
++
++              /*
++               * Prepares an embedded fwcmd, including
++               * request/response sizes.
++               */
++              fwcmd.query = BE_PREPARE_EMBEDDED_FWCMD(pfob,
++                                             wrb, COMMON_NTWK_MAC_QUERY);
++
++              fwcmd.query->params.request.mac1 = (mac1 ? 1 : 0);
++              fwcmd.query->params.request.port = (port1 ? 1 : 0);
++              fwcmd.query->params.request.type = type;
++              fwcmd.query->params.request.permanent = permanent;
++
++              rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_MAC_QUERY,
++                                              params.response.mac.MACAddress);
++              rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_MAC_QUERY,
++                                              params.response.mac.MACAddress);
++              rc.va = mac_address;
++              /* Post the f/w command (with a copy for the response) */
++              status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
++                              cb_context, NULL, NULL, fwcmd.query, &rc);
++      }
++
++      if (status < 0) {
++              TRACE(DL_ERR, "mac set/query failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine writes data to context memory.
++
++    pfob  - Function object handle.
++    mac_table     - Set to the 128-bit multicast address hash table.
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
++
++    IRQL: < DISPATCH_LEVEL
++*/
++
++int be_rxf_multicast_config(struct be_function_object *pfob,
++              bool promiscuous, u32 num, u8 *mac_table,
++              mcc_wrb_cqe_callback cb,        /* optional */
++              void *cb_context,
++              struct be_multicast_q_ctxt *q_ctxt)
++{
++      int status = BE_SUCCESS;
++      struct FWCMD_COMMON_NTWK_MULTICAST_SET *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++
++      ASSERT(num <= ARRAY_SIZE(fwcmd->params.request.mac));
++
++      if (num > ARRAY_SIZE(fwcmd->params.request.mac)) {
++              TRACE(DL_ERR, "Too many multicast addresses. BE supports %d.",
++                    (int) ARRAY_SIZE(fwcmd->params.request.mac));
++              return BE_NOT_OK;
++      }
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_MULTICAST_SET);
++
++      fwcmd->params.request.promiscuous = promiscuous;
++      if (!promiscuous) {
++              fwcmd->params.request.num_mac = num;
++              if (num > 0) {
++                      ASSERT(mac_table);
++                      memcpy(fwcmd->params.request.mac,
++                                              mac_table, ETH_ALEN * num);
++              }
++      }
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, NULL);
++      if (status < 0) {
++              TRACE(DL_ERR, "multicast fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine adds or removes a vlan tag from the rxf table.
++
++    FunctionObject  - Function object handle.
++    VLanTag         - VLan tag to add or remove.
++    Add             - Set to TRUE if this will add a vlan tag
++
++    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
++
++    IRQL: < DISPATCH_LEVEL
++*/
++int be_rxf_vlan_config(struct be_function_object *pfob,
++              bool promiscuous, u32 num, u16 *vlan_tag_array,
++              mcc_wrb_cqe_callback cb,        /* optional */
++              void *cb_context,
++              struct be_vlan_q_ctxt *q_ctxt)  /* optional */
++{
++      int status = BE_SUCCESS;
++      struct FWCMD_COMMON_NTWK_VLAN_CONFIG *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++
++      if (num > ARRAY_SIZE(fwcmd->params.request.vlan_tag)) {
++              TRACE(DL_ERR, "Too many VLAN tags.");
++              return BE_NOT_OK;
++      }
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_VLAN_CONFIG);
++
++      fwcmd->params.request.promiscuous = promiscuous;
++      if (!promiscuous) {
++              fwcmd->params.request.num_vlan = num;
++
++              if (num > 0) {
++                      ASSERT(vlan_tag_array);
++                      memcpy(fwcmd->params.request.vlan_tag, vlan_tag_array,
++                                num * sizeof(vlan_tag_array[0]));
++              }
++      }
++
++      /* Post the commadn */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, NULL);
++      if (status < 0) {
++              TRACE(DL_ERR, "vlan fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++
++int be_rxf_link_status(struct be_function_object *pfob,
++              struct BE_LINK_STATUS *link_status,
++              mcc_wrb_cqe_callback cb,
++              void *cb_context,
++              struct be_link_status_q_ctxt *q_ctxt)
++{
++      struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++      struct be_mcc_wrb_response_copy rc;
++
++      ASSERT(link_status);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb,
++                                             COMMON_NTWK_LINK_STATUS_QUERY);
++
++      rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
++                                      params.response);
++      rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
++                                      params.response);
++      rc.va = link_status;
++      /* Post or queue the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, &rc);
++
++      if (status < 0) {
++              TRACE(DL_ERR, "link status fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++int
++be_rxf_query_eth_statistics(struct be_function_object *pfob,
++                  struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
++                  u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
++                  void *cb_context,
++                  struct be_nonembedded_q_ctxt *q_ctxt)
++{
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++
++      ASSERT(va_for_fwcmd);
++      ASSERT(pa_for_fwcmd);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++
++      TRACE(DL_INFO, "Query eth stats. fwcmd va:%p pa:0x%08x_%08x",
++            va_for_fwcmd, upper_32_bits(pa_for_fwcmd), (u32)pa_for_fwcmd);
++
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      va_for_fwcmd = BE_PREPARE_NONEMBEDDED_FWCMD(pfob, wrb,
++                        va_for_fwcmd, pa_for_fwcmd, ETH_GET_STATISTICS);
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++              cb, cb_context, NULL, NULL, va_for_fwcmd, NULL);
++      if (status < 0) {
++              TRACE(DL_ERR, "eth stats fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++int
++be_rxf_promiscuous(struct be_function_object *pfob,
++                 bool enable_port0, bool enable_port1,
++                 mcc_wrb_cqe_callback cb, void *cb_context,
++                 struct be_promiscuous_q_ctxt *q_ctxt)
++{
++      struct FWCMD_ETH_PROMISCUOUS *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_PROMISCUOUS);
++
++      fwcmd->params.request.port0_promiscuous = enable_port0;
++      fwcmd->params.request.port1_promiscuous = enable_port1;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, NULL);
++
++      if (status < 0) {
++              TRACE(DL_ERR, "promiscuous fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++
++/*
++ *-------------------------------------------------------------------------
++ * Function: be_rxf_filter_config
++ *   Configures BladeEngine ethernet receive filter settings.
++ * pfob    -
++ * settings           - Pointer to the requested filter settings.
++ *                    The response from BladeEngine will be placed back
++ *                    in this structure.
++ * cb                 - optional
++ * cb_context         - optional
++ * q_ctxt             - Optional. Pointer to a previously allocated struct.
++ *                    If the MCC WRB ring is full, this structure is
++ *                    used to queue the operation. It will be posted
++ *                    to the MCC ring when space becomes available. All
++ *                      queued commands will be posted to the ring in
++ *                      the order they are received. It is always valid
++ *                      to pass a pointer to a generic
++ *                      be_generic_q_ctxt. However, the specific
++ *                      context structs are generally smaller than
++ *                      the generic struct.
++ * return pend_status - BE_SUCCESS (0) on success.
++ *                    BE_PENDING (postive value) if the FWCMD
++ *                      completion is pending. Negative error code on failure.
++ *---------------------------------------------------------------------------
++ */
++int
++be_rxf_filter_config(struct be_function_object *pfob,
++                   struct NTWK_RX_FILTER_SETTINGS *settings,
++                   mcc_wrb_cqe_callback cb, void *cb_context,
++                   struct be_rxf_filter_q_ctxt *q_ctxt)
++{
++      struct FWCMD_COMMON_NTWK_RX_FILTER *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      struct be_generic_q_ctxt *generic_ctxt = NULL;
++      unsigned long irql;
++      struct be_mcc_wrb_response_copy rc;
++
++      ASSERT(settings);
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++
++      if (!wrb) {
++              if (q_ctxt && cb) {
++                      wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++                      generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
++                      generic_ctxt->context.bytes = sizeof(*q_ctxt);
++              } else {
++                      status = BE_STATUS_NO_MCC_WRB;
++                      goto Error;
++              }
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_RX_FILTER);
++      memcpy(&fwcmd->params.request, settings, sizeof(*settings));
++
++      rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_RX_FILTER,
++                                      params.response);
++      rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_RX_FILTER,
++                                      params.response);
++      rc.va = settings;
++      /* Post or queue the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
++                      cb, cb_context, NULL, NULL, fwcmd, &rc);
++
++      if (status < 0) {
++              TRACE(DL_ERR, "RXF/ERX filter config fwcmd failed.");
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/etx_context.h linux-2.6.29-rc3.owrt/drivers/staging/benet/etx_context.h
+--- linux-2.6.29.owrt/drivers/staging/benet/etx_context.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/etx_context.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __etx_context_amap_h__
++#define __etx_context_amap_h__
++
++/* ETX ring  context structure. */
++struct BE_ETX_CONTEXT_AMAP {
++      u8 tx_cidx[11]; /* DWORD 0 */
++      u8 rsvd0[5];    /* DWORD 0 */
++      u8 rsvd1[16];   /* DWORD 0 */
++      u8 tx_pidx[11]; /* DWORD 1 */
++      u8 rsvd2;               /* DWORD 1 */
++      u8 tx_ring_size[4];     /* DWORD 1 */
++      u8 pd_id[5];    /* DWORD 1 */
++      u8 pd_id_not_valid;     /* DWORD 1 */
++      u8 cq_id_send[10];      /* DWORD 1 */
++      u8 rsvd3[32];   /* DWORD 2 */
++      u8 rsvd4[32];   /* DWORD 3 */
++      u8 cur_bytes[32];       /* DWORD 4 */
++      u8 max_bytes[32];       /* DWORD 5 */
++      u8 time_stamp[32];      /* DWORD 6 */
++      u8 rsvd5[11];   /* DWORD 7 */
++      u8 func;                /* DWORD 7 */
++      u8 rsvd6[20];   /* DWORD 7 */
++      u8 cur_txd_count[32];   /* DWORD 8 */
++      u8 max_txd_count[32];   /* DWORD 9 */
++      u8 rsvd7[32];   /* DWORD 10 */
++      u8 rsvd8[32];   /* DWORD 11 */
++      u8 rsvd9[32];   /* DWORD 12 */
++      u8 rsvd10[32];  /* DWORD 13 */
++      u8 rsvd11[32];  /* DWORD 14 */
++      u8 rsvd12[32];  /* DWORD 15 */
++} __packed;
++struct ETX_CONTEXT_AMAP {
++      u32 dw[16];
++};
++
++#endif /* __etx_context_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/funcobj.c linux-2.6.29-rc3.owrt/drivers/staging/benet/funcobj.c
+--- linux-2.6.29.owrt/drivers/staging/benet/funcobj.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/funcobj.c      2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,565 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include "hwlib.h"
++#include "bestatus.h"
++
++
++int
++be_function_internal_query_firmware_config(struct be_function_object *pfob,
++                                 struct BE_FIRMWARE_CONFIG *config)
++{
++      struct FWCMD_COMMON_FIRMWARE_CONFIG *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++      struct be_mcc_wrb_response_copy rc;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_FIRMWARE_CONFIG);
++
++      rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_FIRMWARE_CONFIG,
++                                      params.response);
++      rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_FIRMWARE_CONFIG,
++                                      params.response);
++      rc.va = config;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL,
++                                      NULL, NULL, NULL, fwcmd, &rc);
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This allocates and initializes a function object based on the information
++    provided by upper layer drivers.
++
++    Returns BE_SUCCESS on success and an appropriate int on failure.
++
++    A function object represents a single BladeEngine (logical) PCI function.
++    That is a function object either represents
++    the networking side of BladeEngine or the iSCSI side of BladeEngine.
++
++    This routine will also detect and create an appropriate PD object for the
++    PCI function as needed.
++*/
++int
++be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
++              u8 __iomem *pci_va, u32 function_type,
++              struct ring_desc *mailbox, struct be_function_object *pfob)
++{
++      int status;
++
++      ASSERT(pfob);   /* not a magic assert */
++      ASSERT(function_type <= 2);
++
++      TRACE(DL_INFO, "Create function object. type:%s object:0x%p",
++            (function_type == BE_FUNCTION_TYPE_ISCSI ? "iSCSI" :
++             (function_type == BE_FUNCTION_TYPE_NETWORK ? "Network" :
++              "Arm")), pfob);
++
++      memset(pfob, 0, sizeof(*pfob));
++
++      pfob->type = function_type;
++      pfob->csr_va = csr_va;
++      pfob->db_va = db_va;
++      pfob->pci_va = pci_va;
++
++      spin_lock_init(&pfob->cq_lock);
++      spin_lock_init(&pfob->post_lock);
++      spin_lock_init(&pfob->mcc_context_lock);
++
++
++      pfob->pci_function_number = 1;
++
++
++      pfob->emulate = false;
++      TRACE(DL_NOTE, "Non-emulation mode");
++      status = be_drive_POST(pfob);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "BladeEngine POST failed.");
++              goto error;
++      }
++
++      /* Initialize the mailbox */
++      status = be_mpu_init_mailbox(pfob, mailbox);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "Failed to initialize mailbox.");
++              goto error;
++      }
++      /*
++       * Cache the firmware config for ASSERTs in hwclib and later
++       * driver queries.
++       */
++      status = be_function_internal_query_firmware_config(pfob,
++                                             &pfob->fw_config);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "Failed to query firmware config.");
++              goto error;
++      }
++
++error:
++      if (status != BE_SUCCESS) {
++              /* No cleanup necessary */
++              TRACE(DL_ERR, "Failed to create function.");
++              memset(pfob, 0, sizeof(*pfob));
++      }
++      return status;
++}
++
++/*
++    This routine drops the reference count on a given function object. Once
++    the reference count falls to zero, the function object is destroyed and all
++    resources held are freed.
++
++    FunctionObject      - The function object to drop the reference to.
++*/
++int be_function_object_destroy(struct be_function_object *pfob)
++{
++      TRACE(DL_INFO, "Destroy pfob. Object:0x%p",
++            pfob);
++
++
++      ASSERT(pfob->mcc == NULL);
++
++      return BE_SUCCESS;
++}
++
++int be_function_cleanup(struct be_function_object *pfob)
++{
++      int status = 0;
++      u32 isr;
++      u32 host_intr;
++      struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
++
++
++      if (pfob->type == BE_FUNCTION_TYPE_NETWORK) {
++              status = be_rxf_multicast_config(pfob, false, 0,
++                                              NULL, NULL, NULL, NULL);
++              ASSERT(status == BE_SUCCESS);
++      }
++      /* VLAN */
++      status = be_rxf_vlan_config(pfob, false, 0, NULL, NULL, NULL, NULL);
++      ASSERT(status == BE_SUCCESS);
++      /*
++       * MCC Queue -- Switches to mailbox mode.  May want to destroy
++       * all but the MCC CQ before this call if polling CQ is much better
++       * performance than polling mailbox register.
++       */
++      if (pfob->mcc)
++              status = be_mcc_ring_destroy(pfob->mcc);
++      /*
++       * If interrupts are disabled, clear any CEV interrupt assertions that
++       * fired after we stopped processing EQs.
++       */
++      ctrl.dw[0] = PCICFG1_READ(pfob, host_timer_int_ctrl);
++      host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
++                                                      hostintr, ctrl.dw);
++      if (!host_intr)
++              if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
++                      isr = CSR_READ(pfob, cev.isr1);
++              else
++                      isr = CSR_READ(pfob, cev.isr0);
++      else
++              /* This should never happen... */
++              TRACE(DL_ERR, "function_cleanup called with interrupt enabled");
++      /* Function object destroy */
++      status = be_function_object_destroy(pfob);
++      ASSERT(status == BE_SUCCESS);
++
++      return status;
++}
++
++
++void *
++be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
++      struct MCC_WRB_AMAP *wrb, u32 payld_len, u32 request_length,
++      u32 response_length, u32 opcode, u32 subsystem)
++{
++      struct FWCMD_REQUEST_HEADER *header = NULL;
++      u32 n;
++
++      ASSERT(wrb);
++
++      n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
++      AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 1);
++      AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, min(payld_len, n));
++      header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
++
++      header->timeout = 0;
++      header->domain = 0;
++      header->request_length = max(request_length, response_length);
++      header->opcode = opcode;
++      header->subsystem = subsystem;
++
++      return header;
++}
++
++void *
++be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
++      struct MCC_WRB_AMAP *wrb,
++      void *fwcmd_va, u64 fwcmd_pa,
++      u32 payld_len,
++      u32 request_length,
++      u32 response_length,
++      u32 opcode, u32 subsystem)
++{
++      struct FWCMD_REQUEST_HEADER *header = NULL;
++      u32 n;
++      struct MCC_WRB_PAYLOAD_AMAP *plp;
++
++      ASSERT(wrb);
++      ASSERT(fwcmd_va);
++
++      header = (struct FWCMD_REQUEST_HEADER *) fwcmd_va;
++
++      AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 0);
++      AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, payld_len);
++
++      /*
++       * Assume one fragment. The caller may override the SGL by
++       * rewriting the 0th length and adding more entries.  They
++       * will also need to update the sge_count.
++       */
++      AMAP_SET_BITS_PTR(MCC_WRB, sge_count, wrb, 1);
++
++      n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
++      plp = (struct MCC_WRB_PAYLOAD_AMAP *)((u8 *)wrb + n);
++      AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].length, plp, payld_len);
++      AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_lo, plp, (u32)fwcmd_pa);
++      AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_hi, plp,
++                                      upper_32_bits(fwcmd_pa));
++
++      header->timeout = 0;
++      header->domain = 0;
++      header->request_length = max(request_length, response_length);
++      header->opcode = opcode;
++      header->subsystem = subsystem;
++
++      return header;
++}
++
++struct MCC_WRB_AMAP *
++be_function_peek_mcc_wrb(struct be_function_object *pfob)
++{
++      struct MCC_WRB_AMAP *wrb = NULL;
++      u32 offset;
++
++      if (pfob->mcc)
++              wrb = _be_mpu_peek_ring_wrb(pfob->mcc, false);
++      else {
++              offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
++              wrb = (struct MCC_WRB_AMAP *) ((u8 *) pfob->mailbox.va +
++                              offset);
++      }
++
++      if (wrb)
++              memset(wrb, 0, sizeof(struct MCC_WRB_AMAP));
++
++      return wrb;
++}
++
++#if defined(BE_DEBUG)
++void be_function_debug_print_wrb(struct be_function_object *pfob,
++              struct MCC_WRB_AMAP *wrb, void *optional_fwcmd_va,
++              struct be_mcc_wrb_context *wrb_context)
++{
++
++      struct FWCMD_REQUEST_HEADER *header = NULL;
++      u8 embedded;
++      u32 n;
++
++      embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, wrb);
++
++      if (embedded) {
++              n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
++              header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
++      } else {
++              header = (struct FWCMD_REQUEST_HEADER *) optional_fwcmd_va;
++      }
++
++      /* Save the completed count before posting for a debug assert. */
++
++      if (header) {
++              wrb_context->opcode = header->opcode;
++              wrb_context->subsystem = header->subsystem;
++
++      } else {
++              wrb_context->opcode = 0;
++              wrb_context->subsystem = 0;
++      }
++}
++#else
++#define be_function_debug_print_wrb(a_, b_, c_, d_)
++#endif
++
++int
++be_function_post_mcc_wrb(struct be_function_object *pfob,
++              struct MCC_WRB_AMAP *wrb,
++              struct be_generic_q_ctxt *q_ctxt,
++              mcc_wrb_cqe_callback cb, void *cb_context,
++              mcc_wrb_cqe_callback internal_cb,
++              void *internal_cb_context, void *optional_fwcmd_va,
++              struct be_mcc_wrb_response_copy *rc)
++{
++      int status;
++      struct be_mcc_wrb_context *wrb_context = NULL;
++      u64 *p;
++
++      if (q_ctxt) {
++              /* Initialize context.         */
++              q_ctxt->context.internal_cb = internal_cb;
++              q_ctxt->context.internal_cb_context = internal_cb_context;
++              q_ctxt->context.cb = cb;
++              q_ctxt->context.cb_context = cb_context;
++              if (rc) {
++                      q_ctxt->context.copy.length = rc->length;
++                      q_ctxt->context.copy.fwcmd_offset = rc->fwcmd_offset;
++                      q_ctxt->context.copy.va = rc->va;
++              } else
++                      q_ctxt->context.copy.length = 0;
++
++              q_ctxt->context.optional_fwcmd_va = optional_fwcmd_va;
++
++              /* Queue this request */
++              status = be_function_queue_mcc_wrb(pfob, q_ctxt);
++
++              goto Error;
++      }
++      /*
++       * Allocate a WRB context struct to hold the callback pointers,
++       * status, etc.  This is required if commands complete out of order.
++       */
++      wrb_context = _be_mcc_allocate_wrb_context(pfob);
++      if (!wrb_context) {
++              TRACE(DL_WARN, "Failed to allocate MCC WRB context.");
++              status = BE_STATUS_SYSTEM_RESOURCES;
++              goto Error;
++      }
++      /* Initialize context. */
++      memset(wrb_context, 0, sizeof(*wrb_context));
++      wrb_context->internal_cb = internal_cb;
++      wrb_context->internal_cb_context = internal_cb_context;
++      wrb_context->cb = cb;
++      wrb_context->cb_context = cb_context;
++      if (rc) {
++              wrb_context->copy.length = rc->length;
++              wrb_context->copy.fwcmd_offset = rc->fwcmd_offset;
++              wrb_context->copy.va = rc->va;
++      } else
++              wrb_context->copy.length = 0;
++      wrb_context->wrb = wrb;
++
++      /*
++       * Copy the context pointer into the WRB opaque tag field.
++       * Verify assumption of 64-bit tag with a compile time assert.
++       */
++      p = (u64 *) ((u8 *)wrb + offsetof(struct BE_MCC_WRB_AMAP, tag)/8);
++      *p = (u64)(size_t)wrb_context;
++
++      /* Print info about this FWCMD for debug builds. */
++      be_function_debug_print_wrb(pfob, wrb, optional_fwcmd_va, wrb_context);
++
++      /*
++       * issue the WRB to the MPU as appropriate
++       */
++      if (pfob->mcc) {
++              /*
++               * we're in WRB mode, pass to the mcc layer
++               */
++              status = _be_mpu_post_wrb_ring(pfob->mcc, wrb, wrb_context);
++      } else {
++              /*
++               * we're in mailbox mode
++               */
++              status = _be_mpu_post_wrb_mailbox(pfob, wrb, wrb_context);
++
++              /* mailbox mode always completes synchronously */
++              ASSERT(status != BE_STATUS_PENDING);
++      }
++
++Error:
++
++      return status;
++}
++
++int
++be_function_ring_destroy(struct be_function_object *pfob,
++              u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
++              void *cb_context, mcc_wrb_cqe_callback internal_cb,
++              void *internal_cb_context)
++{
++
++      struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      int status = 0;
++      unsigned long irql;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      TRACE(DL_INFO, "Destroy ring id:%d type:%d", id, ring_type);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in destroy ring.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
++
++      fwcmd->params.request.id = id;
++      fwcmd->params.request.ring_type = ring_type;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
++                              internal_cb, internal_cb_context, fwcmd, NULL);
++      if (status != BE_SUCCESS && status != BE_PENDING) {
++              TRACE(DL_ERR, "Ring destroy fwcmd failed. id:%d ring_type:%d",
++                      id, ring_type);
++              goto Error;
++      }
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++void
++be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list, u32 max_num)
++{
++      u32 num_pages = PAGES_SPANNED(rd->va, rd->length);
++      u32 i = 0;
++      u64 pa = rd->pa;
++      __le64 lepa;
++
++      ASSERT(pa_list);
++      ASSERT(pa);
++
++      for (i = 0; i < min(num_pages, max_num); i++) {
++              lepa = cpu_to_le64(pa);
++              pa_list[i].lo = (u32)lepa;
++              pa_list[i].hi = upper_32_bits(lepa);
++              pa += PAGE_SIZE;
++      }
++}
++
++
++
++/*-----------------------------------------------------------------------------
++ * Function: be_function_get_fw_version
++ *   Retrieves the firmware version on the adpater. If the callback is
++ *   NULL this call executes synchronously. If the callback is not NULL,
++ *   the returned status will be BE_PENDING if the command was issued
++ *   successfully.
++ * pfob    -
++ * fwv         - Pointer to response buffer if callback is NULL.
++ * cb           - Callback function invoked when the FWCMD completes.
++ * cb_context   - Passed to the callback function.
++ * return pend_status - BE_SUCCESS (0) on success.
++ *                    BE_PENDING (postive value) if the FWCMD
++ *                      completion is pending. Negative error code on failure.
++ *---------------------------------------------------------------------------
++ */
++int
++be_function_get_fw_version(struct be_function_object *pfob,
++              struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fwv,
++              mcc_wrb_cqe_callback cb, void *cb_context)
++{
++      int status = BE_SUCCESS;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      struct FWCMD_COMMON_GET_FW_VERSION *fwcmd = NULL;
++      unsigned long irql;
++      struct be_mcc_wrb_response_copy rc;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              TRACE(DL_ERR, "MCC wrb peek failed.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto Error;
++      }
++
++      if (!cb && !fwv) {
++              TRACE(DL_ERR, "callback and response buffer NULL!");
++              status = BE_NOT_OK;
++              goto Error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FW_VERSION);
++
++      rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_GET_FW_VERSION,
++                                      params.response);
++      rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_GET_FW_VERSION,
++                                      params.response);
++      rc.va = fwv;
++
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
++                              cb_context, NULL, NULL, fwcmd, &rc);
++
++Error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++int
++be_function_queue_mcc_wrb(struct be_function_object *pfob,
++                        struct be_generic_q_ctxt *q_ctxt)
++{
++      int status;
++
++      ASSERT(q_ctxt);
++
++      /*
++       * issue the WRB to the MPU as appropriate
++       */
++      if (pfob->mcc) {
++
++              /* We're in ring mode.  Queue this item. */
++              pfob->mcc->backlog_length++;
++              list_add_tail(&q_ctxt->context.list, &pfob->mcc->backlog);
++              status = BE_PENDING;
++      } else {
++              status = BE_NOT_OK;
++      }
++      return status;
++}
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_common_bmap.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_common_bmap.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_common_bmap.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_common_bmap.h    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,717 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_common_bmap_h__
++#define __fwcmd_common_bmap_h__
++#include "fwcmd_types_bmap.h"
++#include "fwcmd_hdr_bmap.h"
++
++#if defined(__BIG_ENDIAN)
++   /* Physical Address. */
++struct PHYS_ADDR {
++      union {
++              struct {
++                      u32 lo; /* DWORD 0 */
++                      u32 hi; /* DWORD 1 */
++              } __packed;     /* unnamed struct */
++              u32 dw[2];      /* dword union */
++      };                      /* unnamed union */
++} __packed ;
++
++
++#else
++   /* Physical Address. */
++struct PHYS_ADDR {
++      union {
++              struct {
++                      u32 lo; /* DWORD 0 */
++                      u32 hi; /* DWORD 1 */
++              } __packed;     /* unnamed struct */
++              u32 dw[2];      /* dword union */
++      };                      /* unnamed union */
++} __packed ;
++
++struct BE_LINK_STATUS {
++      u8 mac0_duplex;
++      u8 mac0_speed;
++      u8 mac1_duplex;
++      u8 mac1_speed;
++      u8 mgmt_mac_duplex;
++      u8 mgmt_mac_speed;
++      u8 active_port;
++      u8 rsvd0;
++      u8 mac0_fault;
++      u8 mac1_fault;
++      u16 rsvd1;
++} __packed;
++#endif
++
++struct FWCMD_COMMON_ANON_170_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++union LINK_STATUS_QUERY_PARAMS {
++      struct BE_LINK_STATUS response;
++      struct FWCMD_COMMON_ANON_170_REQUEST request;
++} __packed;
++
++/*
++ *  Queries the the link status for all ports.  The valid values below
++ *  DO NOT indicate that  a particular duplex or speed is supported by
++ *  BladeEngine. These enumerations simply  list all possible duplexes
++ *  and speeds for any port. Consult BladeEngine product  documentation
++ *  for the supported parameters.
++ */
++struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY {
++      union FWCMD_HEADER header;
++      union LINK_STATUS_QUERY_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_171_REQUEST {
++      u8 type;
++      u8 port;
++      u8 mac1;
++      u8 permanent;
++} __packed;
++
++struct FWCMD_COMMON_ANON_172_RESPONSE {
++      struct MAC_ADDRESS_FORMAT mac;
++} __packed;
++
++union NTWK_MAC_QUERY_PARAMS {
++      struct FWCMD_COMMON_ANON_171_REQUEST request;
++      struct FWCMD_COMMON_ANON_172_RESPONSE response;
++} __packed;
++
++/* Queries one MAC address.  */
++struct FWCMD_COMMON_NTWK_MAC_QUERY {
++      union FWCMD_HEADER header;
++      union NTWK_MAC_QUERY_PARAMS params;
++} __packed;
++
++struct MAC_SET_PARAMS_IN {
++      u8 type;
++      u8 port;
++      u8 mac1;
++      u8 invalidate;
++      struct MAC_ADDRESS_FORMAT mac;
++} __packed;
++
++struct MAC_SET_PARAMS_OUT {
++      u32 rsvd0;
++} __packed;
++
++union MAC_SET_PARAMS {
++      struct MAC_SET_PARAMS_IN request;
++      struct MAC_SET_PARAMS_OUT response;
++} __packed;
++
++/* Sets a MAC address.  */
++struct FWCMD_COMMON_NTWK_MAC_SET {
++      union FWCMD_HEADER header;
++      union MAC_SET_PARAMS params;
++} __packed;
++
++/* MAC address list. */
++struct NTWK_MULTICAST_MAC_LIST {
++      u8 byte[6];
++} __packed;
++
++struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD {
++      u16 num_mac;
++      u8 promiscuous;
++      u8 rsvd0;
++      struct NTWK_MULTICAST_MAC_LIST mac[32];
++} __packed;
++
++struct FWCMD_COMMON_ANON_174_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_173_PARAMS {
++      struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD request;
++      struct FWCMD_COMMON_ANON_174_RESPONSE response;
++} __packed;
++
++/*
++ *  Sets multicast address hash. The MPU will merge the MAC address lists
++ *  from all clients,  including the networking and storage functions.
++ *  This command may fail if the final merged  list of MAC addresses exceeds
++ *  32 entries.
++ */
++struct FWCMD_COMMON_NTWK_MULTICAST_SET {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_173_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD {
++      u16 num_vlan;
++      u8 promiscuous;
++      u8 rsvd0;
++      u16 vlan_tag[32];
++} __packed;
++
++struct FWCMD_COMMON_ANON_176_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_175_PARAMS {
++      struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD request;
++      struct FWCMD_COMMON_ANON_176_RESPONSE response;
++} __packed;
++
++/*
++ *  Sets VLAN tag filter. The MPU will merge the VLAN tag list from all
++ *  clients, including  the networking and storage functions. This command
++ *  may fail if the final vlan_tag array  (from all functions) is longer
++ *  than 32 entries.
++ */
++struct FWCMD_COMMON_NTWK_VLAN_CONFIG {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_175_PARAMS params;
++} __packed;
++
++struct RING_DESTROY_REQUEST {
++      u16 ring_type;
++      u16 id;
++      u8 bypass_flush;
++      u8 rsvd0;
++      u16 rsvd1;
++} __packed;
++
++struct FWCMD_COMMON_ANON_190_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_189_PARAMS {
++      struct RING_DESTROY_REQUEST request;
++      struct FWCMD_COMMON_ANON_190_RESPONSE response;
++} __packed;
++/*
++ *  Command for destroying any ring. The connection(s) using the ring should
++ *  be quiesced  before destroying the ring.
++ */
++struct FWCMD_COMMON_RING_DESTROY {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_189_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_192_REQUEST {
++      u16 num_pages;
++      u16 rsvd0;
++      struct CQ_CONTEXT_AMAP context;
++      struct PHYS_ADDR pages[4];
++} __packed ;
++
++struct FWCMD_COMMON_ANON_193_RESPONSE {
++      u16 cq_id;
++} __packed ;
++
++union FWCMD_COMMON_ANON_191_PARAMS {
++      struct FWCMD_COMMON_ANON_192_REQUEST request;
++      struct FWCMD_COMMON_ANON_193_RESPONSE response;
++} __packed ;
++
++/*
++ *  Command for creating a completion queue. A Completion Queue must span
++ *  at least 1 page and  at most 4 pages. Each completion queue entry
++ *  is 16 bytes regardless of CQ entry format.  Thus the ring must be
++ *  at least 256 entries deep (corresponding to 1 page) and can be at
++ *   most 1024 entries deep (corresponding to 4 pages). The number of
++ *  pages posted must  contain the CQ ring size as encoded in the context.
++ *
++ */
++struct FWCMD_COMMON_CQ_CREATE {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_191_PARAMS params;
++} __packed ;
++
++struct FWCMD_COMMON_ANON_198_REQUEST {
++      u16 num_pages;
++      u16 rsvd0;
++      struct EQ_CONTEXT_AMAP context;
++      struct PHYS_ADDR pages[8];
++} __packed ;
++
++struct FWCMD_COMMON_ANON_199_RESPONSE {
++      u16 eq_id;
++} __packed ;
++
++union FWCMD_COMMON_ANON_197_PARAMS {
++      struct FWCMD_COMMON_ANON_198_REQUEST request;
++      struct FWCMD_COMMON_ANON_199_RESPONSE response;
++} __packed ;
++
++/*
++ *  Command for creating a event queue. An Event Queue must span at least
++ *  1 page and at most  8 pages. The number of pages posted must contain
++ *  the EQ ring. The ring is defined by  the size of the EQ entries (encoded
++ *  in the context) and the number of EQ entries (also  encoded in the
++ *  context).
++ */
++struct FWCMD_COMMON_EQ_CREATE {
++      union  FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_197_PARAMS params;
++} __packed ;
++
++struct FWCMD_COMMON_ANON_201_REQUEST {
++      u16 cq_id;
++      u16 bcmc_cq_id;
++      u16 num_pages;
++      u16 rsvd0;
++      struct PHYS_ADDR pages[2];
++} __packed;
++
++struct FWCMD_COMMON_ANON_202_RESPONSE {
++      u16 id;
++} __packed;
++
++union FWCMD_COMMON_ANON_200_PARAMS {
++      struct FWCMD_COMMON_ANON_201_REQUEST request;
++      struct FWCMD_COMMON_ANON_202_RESPONSE response;
++} __packed;
++
++/*
++ *  Command for creating Ethernet receive ring.  An ERX ring contains ETH_RX_D
++ *  entries (8  bytes each). An ERX ring must be 1024 entries deep
++ *  (corresponding to 2 pages).
++ */
++struct FWCMD_COMMON_ETH_RX_CREATE {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_200_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_204_REQUEST {
++      u16 num_pages;
++      u8 ulp_num;
++      u8 type;
++      struct ETX_CONTEXT_AMAP context;
++      struct PHYS_ADDR pages[8];
++} __packed ;
++
++struct FWCMD_COMMON_ANON_205_RESPONSE {
++      u16 cid;
++      u8 ulp_num;
++      u8 rsvd0;
++} __packed ;
++
++union FWCMD_COMMON_ANON_203_PARAMS {
++      struct FWCMD_COMMON_ANON_204_REQUEST request;
++      struct FWCMD_COMMON_ANON_205_RESPONSE response;
++} __packed ;
++
++/*
++ *  Command for creating an Ethernet transmit ring.  An ETX ring contains
++ *  ETH_WRB entries (16  bytes each). An ETX ring must be at least 256
++ *  entries deep (corresponding to 1 page)  and at most 2k entries deep
++ *  (corresponding to 8 pages).
++ */
++struct FWCMD_COMMON_ETH_TX_CREATE {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_203_PARAMS params;
++} __packed ;
++
++struct FWCMD_COMMON_ANON_222_REQUEST {
++      u16 num_pages;
++      u16 rsvd0;
++      struct MCC_RING_CONTEXT_AMAP context;
++      struct PHYS_ADDR pages[8];
++} __packed ;
++
++struct FWCMD_COMMON_ANON_223_RESPONSE {
++      u16 id;
++} __packed ;
++
++union FWCMD_COMMON_ANON_221_PARAMS {
++      struct FWCMD_COMMON_ANON_222_REQUEST request;
++      struct FWCMD_COMMON_ANON_223_RESPONSE response;
++} __packed ;
++
++/*
++ *  Command for creating the MCC ring. An MCC ring must be at least 16
++ *  entries deep  (corresponding to 1 page) and at most 128 entries deep
++ *  (corresponding to 8 pages).
++ */
++struct FWCMD_COMMON_MCC_CREATE {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_221_PARAMS params;
++} __packed ;
++
++struct GET_QOS_IN {
++      u32 qos_params_rsvd;
++} __packed;
++
++struct GET_QOS_OUT {
++      u32 max_bits_per_second_NIC;
++      u32 max_packets_per_second_NIC;
++      u32 max_ios_per_second_iSCSI;
++      u32 max_bytes_per_second_iSCSI;
++      u16 domain_VLAN_tag;
++      u16 fabric_domain_ID;
++      u32 qos_params_oem[4];
++} __packed;
++
++union GET_QOS_PARAMS {
++      struct GET_QOS_IN request;
++      struct GET_QOS_OUT response;
++} __packed;
++
++/* QOS/Bandwidth settings per domain. Applicable only in VMs.  */
++struct FWCMD_COMMON_GET_QOS {
++      union FWCMD_HEADER header;
++      union GET_QOS_PARAMS params;
++} __packed;
++
++struct SET_QOS_IN {
++      u32 valid_flags;
++      u32 max_bits_per_second_NIC;
++      u32 max_packets_per_second_NIC;
++      u32 max_ios_per_second_iSCSI;
++      u32 max_bytes_per_second_iSCSI;
++      u16 domain_VLAN_tag;
++      u16 fabric_domain_ID;
++      u32 qos_params_oem[4];
++} __packed;
++
++struct SET_QOS_OUT {
++      u32 qos_params_rsvd;
++} __packed;
++
++union SET_QOS_PARAMS {
++      struct SET_QOS_IN request;
++      struct SET_QOS_OUT response;
++} __packed;
++
++/* QOS/Bandwidth settings per domain. Applicable only in VMs.  */
++struct FWCMD_COMMON_SET_QOS {
++      union FWCMD_HEADER header;
++      union SET_QOS_PARAMS params;
++} __packed;
++
++struct SET_FRAME_SIZE_IN {
++      u32 max_tx_frame_size;
++      u32 max_rx_frame_size;
++} __packed;
++
++struct SET_FRAME_SIZE_OUT {
++      u32 chip_max_tx_frame_size;
++      u32 chip_max_rx_frame_size;
++} __packed;
++
++union SET_FRAME_SIZE_PARAMS {
++      struct SET_FRAME_SIZE_IN request;
++      struct SET_FRAME_SIZE_OUT response;
++} __packed;
++
++/* Set frame size command. Only host domain may issue this command.  */
++struct FWCMD_COMMON_SET_FRAME_SIZE {
++      union FWCMD_HEADER header;
++      union SET_FRAME_SIZE_PARAMS params;
++} __packed;
++
++struct FORCE_FAILOVER_IN {
++      u32 move_to_port;
++      u32 failover_config;
++} __packed;
++
++struct FWCMD_COMMON_ANON_231_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_230_PARAMS {
++      struct FORCE_FAILOVER_IN request;
++      struct FWCMD_COMMON_ANON_231_RESPONSE response;
++} __packed;
++
++/*
++ *  Use this command to control failover in BladeEngine. It may be used
++ *  to failback to a  restored port or to forcibly move traffic from
++ *  one port to another. It may also be used  to enable or disable the
++ *  automatic failover feature. This command can only be issued by  domain
++ *  0.
++ */
++struct FWCMD_COMMON_FORCE_FAILOVER {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_230_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_240_REQUEST {
++      u64 context;
++} __packed;
++
++struct FWCMD_COMMON_ANON_241_RESPONSE {
++      u64 context;
++} __packed;
++
++union FWCMD_COMMON_ANON_239_PARAMS {
++      struct FWCMD_COMMON_ANON_240_REQUEST request;
++      struct FWCMD_COMMON_ANON_241_RESPONSE response;
++} __packed;
++
++/*
++ *  This command can be used by clients as a no-operation request. Typical
++ *  uses for drivers  are as a heartbeat mechanism, or deferred processing
++ *  catalyst. The ARM will always  complete this command with a good completion.
++ *  The 64-bit parameter is not touched by the  ARM processor.
++ */
++struct FWCMD_COMMON_NOP {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_239_PARAMS params;
++} __packed;
++
++struct NTWK_RX_FILTER_SETTINGS {
++      u8 promiscuous;
++      u8 ip_cksum;
++      u8 tcp_cksum;
++      u8 udp_cksum;
++      u8 pass_err;
++      u8 pass_ckerr;
++      u8 strip_crc;
++      u8 mcast_en;
++      u8 bcast_en;
++      u8 mcast_promiscuous_en;
++      u8 unicast_en;
++      u8 vlan_promiscuous;
++} __packed;
++
++union FWCMD_COMMON_ANON_242_PARAMS {
++      struct NTWK_RX_FILTER_SETTINGS request;
++      struct NTWK_RX_FILTER_SETTINGS response;
++} __packed;
++
++/*
++ *  This command is used to modify the ethernet receive filter configuration.
++ *  Only domain 0  network function drivers may issue this command. The
++ *  applied configuration is returned in  the response payload. Note:
++ *  Some receive packet filter settings are global on  BladeEngine and
++ *  can affect both the storage and network function clients that the
++ *   BladeEngine hardware and firmware serve. Additionaly, depending
++ *  on the revision of  BladeEngine, some ethernet receive filter settings
++ *  are dependent on others. If a  dependency exists between settings
++ *  for the BladeEngine revision, and the command request  settings do
++ *  not meet the dependency requirement, the invalid settings will not
++ *  be  applied despite the comand succeeding. For example: a driver may
++ *  request to enable  broadcast packets, but not enable multicast packets.
++ *  On early revisions of BladeEngine,  there may be no distinction between
++ *  broadcast and multicast filters, so broadcast could  not be enabled
++ *  without enabling multicast. In this scenario, the comand would still
++ *   succeed, but the response payload would indicate the previously
++ *  configured broadcast  and multicast setting.
++ */
++struct FWCMD_COMMON_NTWK_RX_FILTER {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_242_PARAMS params;
++} __packed;
++
++
++struct FWCMD_COMMON_ANON_244_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD {
++      u8 firmware_version_string[32];
++      u8 fw_on_flash_version_string[32];
++} __packed;
++
++union FWCMD_COMMON_ANON_243_PARAMS {
++      struct FWCMD_COMMON_ANON_244_REQUEST request;
++      struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD response;
++} __packed;
++
++/* This comand retrieves the firmware version.  */
++struct FWCMD_COMMON_GET_FW_VERSION {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_243_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_246_REQUEST {
++      u16 tx_flow_control;
++      u16 rx_flow_control;
++} __packed;
++
++struct FWCMD_COMMON_ANON_247_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_245_PARAMS {
++      struct FWCMD_COMMON_ANON_246_REQUEST request;
++      struct FWCMD_COMMON_ANON_247_RESPONSE response;
++} __packed;
++
++/*
++ *  This comand is used to program BladeEngine flow control behavior.
++ *  Only the host  networking driver is allowed to use this comand.
++ */
++struct FWCMD_COMMON_SET_FLOW_CONTROL {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_245_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_249_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++struct FWCMD_COMMON_ANON_250_RESPONSE {
++      u16 tx_flow_control;
++      u16 rx_flow_control;
++} __packed;
++
++union FWCMD_COMMON_ANON_248_PARAMS {
++      struct FWCMD_COMMON_ANON_249_REQUEST request;
++      struct FWCMD_COMMON_ANON_250_RESPONSE response;
++} __packed;
++
++/* This comand is used to read BladeEngine flow control settings.  */
++struct FWCMD_COMMON_GET_FLOW_CONTROL {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_248_PARAMS params;
++} __packed;
++
++struct EQ_DELAY_PARAMS {
++      u32 eq_id;
++      u32 delay_in_microseconds;
++} __packed;
++
++struct FWCMD_COMMON_ANON_257_REQUEST {
++      u32 num_eq;
++      u32 rsvd0;
++      struct EQ_DELAY_PARAMS delay[16];
++} __packed;
++
++struct FWCMD_COMMON_ANON_258_RESPONSE {
++      u32 delay_resolution_in_microseconds;
++      u32 delay_max_in_microseconds;
++} __packed;
++
++union MODIFY_EQ_DELAY_PARAMS {
++      struct FWCMD_COMMON_ANON_257_REQUEST request;
++      struct FWCMD_COMMON_ANON_258_RESPONSE response;
++} __packed;
++
++/* This comand changes the EQ delay for a given set of EQs.  */
++struct FWCMD_COMMON_MODIFY_EQ_DELAY {
++      union FWCMD_HEADER header;
++      union MODIFY_EQ_DELAY_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_260_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++struct BE_FIRMWARE_CONFIG {
++      u16 be_config_number;
++      u16 asic_revision;
++      u32 nic_ulp_mask;
++      u32 tulp_mask;
++      u32 iscsi_ulp_mask;
++      u32 rdma_ulp_mask;
++      u32 rsvd0[4];
++      u32 eth_tx_id_start;
++      u32 eth_tx_id_count;
++      u32 eth_rx_id_start;
++      u32 eth_rx_id_count;
++      u32 tpm_wrbq_id_start;
++      u32 tpm_wrbq_id_count;
++      u32 tpm_defq_id_start;
++      u32 tpm_defq_id_count;
++      u32 iscsi_wrbq_id_start;
++      u32 iscsi_wrbq_id_count;
++      u32 iscsi_defq_id_start;
++      u32 iscsi_defq_id_count;
++      u32 rdma_qp_id_start;
++      u32 rdma_qp_id_count;
++      u32 rsvd1[8];
++} __packed;
++
++union FWCMD_COMMON_ANON_259_PARAMS {
++      struct FWCMD_COMMON_ANON_260_REQUEST request;
++      struct BE_FIRMWARE_CONFIG response;
++} __packed;
++
++/*
++ *  This comand queries the current firmware configuration parameters.
++ *   The static  configuration type is defined by be_config_number. This
++ *  differentiates different  BladeEngine builds, such as iSCSI Initiator
++ *  versus iSCSI Target.  For a given static  configuration, the Upper
++ *  Layer Protocol (ULP) processors may be reconfigured to support  different
++ *  protocols. Each ULP processor supports one or more protocols. The
++ *  masks  indicate which processors are configured for each protocol.
++ *   For a given static  configuration, the number of TCP connections
++ *  supported for each protocol may vary. The  *_id_start and *_id_count
++ *  variables define a linear range of IDs that are available for  each
++ *  supported protocol. The *_id_count may be used by the driver to allocate
++ *  the  appropriate number of connection resources. The *_id_start may
++ *  be used to map the  arbitrary range of IDs to a zero-based range
++ *  of indices.
++ */
++struct FWCMD_COMMON_FIRMWARE_CONFIG {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_259_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS {
++      u32 emph_lev_sel_port0;
++      u32 emph_lev_sel_port1;
++      u8 xaui_vo_sel;
++      u8 xaui_state;
++      u16 rsvd0;
++      u32 xaui_eq_vector;
++} __packed;
++
++struct FWCMD_COMMON_ANON_262_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_261_PARAMS {
++      struct FWCMD_COMMON_ANON_262_REQUEST request;
++      struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS response;
++} __packed;
++
++/*
++ *  This comand can be used to read XAUI equalization parameters. The
++ *  ARM firmware applies  default equalization parameters during initialization.
++ *  These parameters may be  customer-specific when derived from the
++ *  SEEPROM. See SEEPROM_DATA for equalization  specific fields.
++ */
++struct FWCMD_COMMON_GET_PORT_EQUALIZATION {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_261_PARAMS params;
++} __packed;
++
++struct FWCMD_COMMON_ANON_264_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_COMMON_ANON_263_PARAMS {
++      struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS request;
++      struct FWCMD_COMMON_ANON_264_RESPONSE response;
++} __packed;
++
++/*
++ *  This comand can be used to set XAUI equalization parameters. The ARM
++ *  firmware applies  default equalization parameters during initialization.
++ *  These parameters may be  customer-specific when derived from the
++ *  SEEPROM. See SEEPROM_DATA for equalization  specific fields.
++ */
++struct FWCMD_COMMON_SET_PORT_EQUALIZATION {
++      union FWCMD_HEADER header;
++      union FWCMD_COMMON_ANON_263_PARAMS params;
++} __packed;
++
++#endif /* __fwcmd_common_bmap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_common.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_common.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_common.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_common.h 2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,222 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_common_amap_h__
++#define __fwcmd_common_amap_h__
++#include "host_struct.h"
++
++/* --- PHY_LINK_DUPLEX_ENUM --- */
++#define PHY_LINK_DUPLEX_NONE            (0)
++#define PHY_LINK_DUPLEX_HALF            (1)
++#define PHY_LINK_DUPLEX_FULL            (2)
++
++/* --- PHY_LINK_SPEED_ENUM --- */
++#define PHY_LINK_SPEED_ZERO             (0)   /* No link. */
++#define PHY_LINK_SPEED_10MBPS           (1)   /* 10 Mbps */
++#define PHY_LINK_SPEED_100MBPS          (2)   /* 100 Mbps */
++#define PHY_LINK_SPEED_1GBPS            (3)   /* 1 Gbps */
++#define PHY_LINK_SPEED_10GBPS           (4)   /* 10 Gbps */
++
++/* --- PHY_LINK_FAULT_ENUM --- */
++#define PHY_LINK_FAULT_NONE             (0)   /* No fault status
++                                                      available or detected */
++#define PHY_LINK_FAULT_LOCAL            (1)   /* Local fault detected */
++#define PHY_LINK_FAULT_REMOTE           (2)   /* Remote fault detected */
++
++/* --- BE_ULP_MASK --- */
++#define BE_ULP0_MASK                    (1)
++#define BE_ULP1_MASK                    (2)
++#define BE_ULP2_MASK                    (4)
++
++/* --- NTWK_ACTIVE_PORT --- */
++#define NTWK_PORT_A                     (0)   /* Port A is currently active */
++#define NTWK_PORT_B                     (1)   /* Port B is currently active */
++#define NTWK_NO_ACTIVE_PORT             (15)  /* Both ports have lost link */
++
++/* --- NTWK_LINK_TYPE --- */
++#define NTWK_LINK_TYPE_PHYSICAL         (0)   /* link up/down event
++                                                 applies to BladeEngine's
++                                                 Physical Ports
++                                                 */
++#define NTWK_LINK_TYPE_VIRTUAL          (1)   /* Virtual link up/down event
++                                                 reported by BladeExchange.
++                                                 This applies only when the
++                                                 VLD feature is enabled
++                                                 */
++
++/*
++ * --- FWCMD_MAC_TYPE_ENUM ---
++ * This enum defines the types of MAC addresses in the RXF MAC Address Table.
++ */
++#define MAC_ADDRESS_TYPE_STORAGE        (0)   /* Storage MAC Address */
++#define MAC_ADDRESS_TYPE_NETWORK        (1)   /* Network MAC Address */
++#define MAC_ADDRESS_TYPE_PD             (2)   /* Protection Domain MAC Addr */
++#define MAC_ADDRESS_TYPE_MANAGEMENT     (3)   /* Managment MAC Address */
++
++
++/* --- FWCMD_RING_TYPE_ENUM --- */
++#define FWCMD_RING_TYPE_ETH_RX          (1)   /* Ring created with */
++                                      /* FWCMD_COMMON_ETH_RX_CREATE. */
++#define FWCMD_RING_TYPE_ETH_TX          (2)   /* Ring created with */
++                                      /* FWCMD_COMMON_ETH_TX_CREATE. */
++#define FWCMD_RING_TYPE_ISCSI_WRBQ      (3)   /* Ring created with */
++                                      /* FWCMD_COMMON_ISCSI_WRBQ_CREATE. */
++#define FWCMD_RING_TYPE_ISCSI_DEFQ      (4)   /* Ring created with */
++                                      /* FWCMD_COMMON_ISCSI_DEFQ_CREATE. */
++#define FWCMD_RING_TYPE_TPM_WRBQ        (5)   /* Ring created with */
++                                      /* FWCMD_COMMON_TPM_WRBQ_CREATE. */
++#define FWCMD_RING_TYPE_TPM_DEFQ        (6)   /* Ring created with */
++                                      /* FWCMD_COMMONTPM_TDEFQ_CREATE. */
++#define FWCMD_RING_TYPE_TPM_RQ          (7)   /* Ring created with */
++                                      /* FWCMD_COMMON_TPM_RQ_CREATE. */
++#define FWCMD_RING_TYPE_MCC             (8)   /* Ring created with */
++                                      /* FWCMD_COMMON_MCC_CREATE. */
++#define FWCMD_RING_TYPE_CQ              (9)   /* Ring created with */
++                                      /* FWCMD_COMMON_CQ_CREATE. */
++#define FWCMD_RING_TYPE_EQ              (10)  /* Ring created with */
++                                      /* FWCMD_COMMON_EQ_CREATE. */
++#define FWCMD_RING_TYPE_QP              (11)  /* Ring created with */
++                                      /* FWCMD_RDMA_QP_CREATE. */
++
++
++/* --- ETH_TX_RING_TYPE_ENUM --- */
++#define ETH_TX_RING_TYPE_FORWARDING     (1)   /* Ethernet ring for
++                                                 forwarding packets */
++#define ETH_TX_RING_TYPE_STANDARD       (2)   /* Ethernet ring for sending
++                                                 network packets. */
++#define ETH_TX_RING_TYPE_BOUND          (3)   /* Ethernet ring bound to the
++                                                 port specified in the command
++                                                 header.port_number field.
++                                                 Rings of this type are
++                                                 NOT subject to the
++                                                 failover logic implemented
++                                                 in the BladeEngine.
++                                                 */
++
++/* --- FWCMD_COMMON_QOS_TYPE_ENUM --- */
++#define QOS_BITS_NIC                    (1)   /* max_bits_per_second_NIC */
++                                                /* field is valid.  */
++#define QOS_PKTS_NIC                    (2)   /* max_packets_per_second_NIC */
++                                                /* field is valid.  */
++#define QOS_IOPS_ISCSI                  (4)   /* max_ios_per_second_iSCSI */
++                                                /*field is valid.  */
++#define QOS_VLAN_TAG                    (8)   /* domain_VLAN_tag field
++                                                 is valid. */
++#define QOS_FABRIC_ID                   (16)  /* fabric_domain_ID field
++                                                 is valid. */
++#define QOS_OEM_PARAMS                  (32)  /* qos_params_oem field
++                                                 is valid. */
++#define QOS_TPUT_ISCSI                  (64)  /* max_bytes_per_second_iSCSI
++                                                 field  is valid.  */
++
++
++/*
++ * --- FAILOVER_CONFIG_ENUM ---
++ * Failover configuration setting used in FWCMD_COMMON_FORCE_FAILOVER
++ */
++#define FAILOVER_CONFIG_NO_CHANGE       (0)   /* No change to automatic */
++                                                /* port failover setting. */
++#define FAILOVER_CONFIG_ON              (1)   /* Automatic port failover
++                                                 on link down  is enabled. */
++#define FAILOVER_CONFIG_OFF             (2)   /* Automatic port failover
++                                                 on link down is disabled. */
++
++/*
++ * --- FAILOVER_PORT_ENUM ---
++ * Failover port setting used in FWCMD_COMMON_FORCE_FAILOVER
++ */
++#define FAILOVER_PORT_A                 (0)   /* Selects port A. */
++#define FAILOVER_PORT_B                 (1)   /* Selects port B. */
++#define FAILOVER_PORT_NONE              (15)  /* No port change requested. */
++
++
++/*
++ * --- MGMT_FLASHROM_OPCODE ---
++ * Flash ROM operation code
++ */
++#define MGMT_FLASHROM_OPCODE_FLASH      (1)   /* Commit downloaded data
++                                                 to Flash ROM */
++#define MGMT_FLASHROM_OPCODE_SAVE       (2)   /* Save downloaded data to
++                                                 ARM's DDR - do not flash */
++#define MGMT_FLASHROM_OPCODE_CLEAR      (3)   /* Erase specified component
++                                                 from FlashROM */
++#define MGMT_FLASHROM_OPCODE_REPORT     (4)   /* Read specified component
++                                                 from Flash ROM */
++#define MGMT_FLASHROM_OPCODE_IMAGE_INFO (5)   /* Returns size of a
++                                                 component */
++
++/*
++ * --- MGMT_FLASHROM_OPTYPE ---
++ * Flash ROM operation type
++ */
++#define MGMT_FLASHROM_OPTYPE_CODE_FIRMWARE (0)        /* Includes ARM firmware,
++                                                 IPSec (optional) and EP
++                                                 firmware  */
++#define MGMT_FLASHROM_OPTYPE_CODE_REDBOOT (1)
++#define MGMT_FLASHROM_OPTYPE_CODE_BIOS  (2)
++#define MGMT_FLASHROM_OPTYPE_CODE_PXE_BIOS (3)
++#define MGMT_FLASHROM_OPTYPE_CODE_CTRLS (4)
++#define MGMT_FLASHROM_OPTYPE_CFG_IPSEC  (5)
++#define MGMT_FLASHROM_OPTYPE_CFG_INI    (6)
++#define MGMT_FLASHROM_OPTYPE_ROM_OFFSET_SPECIFIED (7)
++
++/*
++ * --- FLASHROM_TYPE ---
++ * Flash ROM manufacturers supported in the f/w
++ */
++#define INTEL                           (0)
++#define SPANSION                        (1)
++#define MICRON                          (2)
++
++/* --- DDR_CAS_TYPE --- */
++#define CAS_3                           (0)
++#define CAS_4                           (1)
++#define CAS_5                           (2)
++
++/* --- DDR_SIZE_TYPE --- */
++#define SIZE_256MB                      (0)
++#define SIZE_512MB                      (1)
++
++/* --- DDR_MODE_TYPE --- */
++#define DDR_NO_ECC                      (0)
++#define DDR_ECC                         (1)
++
++/* --- INTERFACE_10GB_TYPE --- */
++#define CX4_TYPE                        (0)
++#define XFP_TYPE                        (1)
++
++/* --- BE_CHIP_MAX_MTU --- */
++#define CHIP_MAX_MTU                    (9000)
++
++/* --- XAUI_STATE_ENUM --- */
++#define XAUI_STATE_ENABLE               (0)   /* This MUST be the default
++                                                 value for all requests
++                                                 which set/change
++                                                 equalization parameter.  */
++#define XAUI_STATE_DISABLE              (255) /* The XAUI for both ports
++                                                 may be disabled for EMI
++                                                 tests. There is no
++                                                 provision for turning off
++                                                 individual ports.
++                                                 */
++/* --- BE_ASIC_REVISION --- */
++#define BE_ASIC_REV_A0                  (1)
++#define BE_ASIC_REV_A1                  (2)
++
++#endif /* __fwcmd_common_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_eth_bmap.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_eth_bmap.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_eth_bmap.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_eth_bmap.h       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,280 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_eth_bmap_h__
++#define __fwcmd_eth_bmap_h__
++#include "fwcmd_hdr_bmap.h"
++#include "fwcmd_types_bmap.h"
++
++struct MIB_ETH_STATISTICS_PARAMS_IN {
++      u32 rsvd0;
++} __packed;
++
++struct BE_RXF_STATS {
++      u32 p0recvdtotalbytesLSD;       /* DWORD 0 */
++      u32 p0recvdtotalbytesMSD;       /* DWORD 1 */
++      u32 p0recvdtotalframes; /* DWORD 2 */
++      u32 p0recvdunicastframes;       /* DWORD 3 */
++      u32 p0recvdmulticastframes;     /* DWORD 4 */
++      u32 p0recvdbroadcastframes;     /* DWORD 5 */
++      u32 p0crcerrors;        /* DWORD 6 */
++      u32 p0alignmentsymerrs; /* DWORD 7 */
++      u32 p0pauseframesrecvd; /* DWORD 8 */
++      u32 p0controlframesrecvd;       /* DWORD 9 */
++      u32 p0inrangelenerrors; /* DWORD 10 */
++      u32 p0outrangeerrors;   /* DWORD 11 */
++      u32 p0frametoolongerrors;       /* DWORD 12 */
++      u32 p0droppedaddressmatch;      /* DWORD 13 */
++      u32 p0droppedvlanmismatch;      /* DWORD 14 */
++      u32 p0ipdroppedtoosmall;        /* DWORD 15 */
++      u32 p0ipdroppedtooshort;        /* DWORD 16 */
++      u32 p0ipdroppedhdrtoosmall;     /* DWORD 17 */
++      u32 p0tcpdroppedlen;    /* DWORD 18 */
++      u32 p0droppedrunt;      /* DWORD 19 */
++      u32 p0recvd64;          /* DWORD 20 */
++      u32 p0recvd65_127;      /* DWORD 21 */
++      u32 p0recvd128_256;     /* DWORD 22 */
++      u32 p0recvd256_511;     /* DWORD 23 */
++      u32 p0recvd512_1023;    /* DWORD 24 */
++      u32 p0recvd1518_1522;   /* DWORD 25 */
++      u32 p0recvd1522_2047;   /* DWORD 26 */
++      u32 p0recvd2048_4095;   /* DWORD 27 */
++      u32 p0recvd4096_8191;   /* DWORD 28 */
++      u32 p0recvd8192_9216;   /* DWORD 29 */
++      u32 p0rcvdipcksmerrs;   /* DWORD 30 */
++      u32 p0recvdtcpcksmerrs; /* DWORD 31 */
++      u32 p0recvdudpcksmerrs; /* DWORD 32 */
++      u32 p0recvdnonrsspackets;       /* DWORD 33 */
++      u32 p0recvdippackets;   /* DWORD 34 */
++      u32 p0recvdchute1packets;       /* DWORD 35 */
++      u32 p0recvdchute2packets;       /* DWORD 36 */
++      u32 p0recvdchute3packets;       /* DWORD 37 */
++      u32 p0recvdipsecpackets;        /* DWORD 38 */
++      u32 p0recvdmanagementpackets;   /* DWORD 39 */
++      u32 p0xmitbyteslsd;     /* DWORD 40 */
++      u32 p0xmitbytesmsd;     /* DWORD 41 */
++      u32 p0xmitunicastframes;        /* DWORD 42 */
++      u32 p0xmitmulticastframes;      /* DWORD 43 */
++      u32 p0xmitbroadcastframes;      /* DWORD 44 */
++      u32 p0xmitpauseframes;  /* DWORD 45 */
++      u32 p0xmitcontrolframes;        /* DWORD 46 */
++      u32 p0xmit64;           /* DWORD 47 */
++      u32 p0xmit65_127;       /* DWORD 48 */
++      u32 p0xmit128_256;      /* DWORD 49 */
++      u32 p0xmit256_511;      /* DWORD 50 */
++      u32 p0xmit512_1023;     /* DWORD 51 */
++      u32 p0xmit1518_1522;    /* DWORD 52 */
++      u32 p0xmit1522_2047;    /* DWORD 53 */
++      u32 p0xmit2048_4095;    /* DWORD 54 */
++      u32 p0xmit4096_8191;    /* DWORD 55 */
++      u32 p0xmit8192_9216;    /* DWORD 56 */
++      u32 p0rxfifooverflowdropped;    /* DWORD 57 */
++      u32 p0ipseclookupfaileddropped; /* DWORD 58 */
++      u32 p1recvdtotalbytesLSD;       /* DWORD 59 */
++      u32 p1recvdtotalbytesMSD;       /* DWORD 60 */
++      u32 p1recvdtotalframes; /* DWORD 61 */
++      u32 p1recvdunicastframes;       /* DWORD 62 */
++      u32 p1recvdmulticastframes;     /* DWORD 63 */
++      u32 p1recvdbroadcastframes;     /* DWORD 64 */
++      u32 p1crcerrors;        /* DWORD 65 */
++      u32 p1alignmentsymerrs; /* DWORD 66 */
++      u32 p1pauseframesrecvd; /* DWORD 67 */
++      u32 p1controlframesrecvd;       /* DWORD 68 */
++      u32 p1inrangelenerrors; /* DWORD 69 */
++      u32 p1outrangeerrors;   /* DWORD 70 */
++      u32 p1frametoolongerrors;       /* DWORD 71 */
++      u32 p1droppedaddressmatch;      /* DWORD 72 */
++      u32 p1droppedvlanmismatch;      /* DWORD 73 */
++      u32 p1ipdroppedtoosmall;        /* DWORD 74 */
++      u32 p1ipdroppedtooshort;        /* DWORD 75 */
++      u32 p1ipdroppedhdrtoosmall;     /* DWORD 76 */
++      u32 p1tcpdroppedlen;    /* DWORD 77 */
++      u32 p1droppedrunt;      /* DWORD 78 */
++      u32 p1recvd64;          /* DWORD 79 */
++      u32 p1recvd65_127;      /* DWORD 80 */
++      u32 p1recvd128_256;     /* DWORD 81 */
++      u32 p1recvd256_511;     /* DWORD 82 */
++      u32 p1recvd512_1023;    /* DWORD 83 */
++      u32 p1recvd1518_1522;   /* DWORD 84 */
++      u32 p1recvd1522_2047;   /* DWORD 85 */
++      u32 p1recvd2048_4095;   /* DWORD 86 */
++      u32 p1recvd4096_8191;   /* DWORD 87 */
++      u32 p1recvd8192_9216;   /* DWORD 88 */
++      u32 p1rcvdipcksmerrs;   /* DWORD 89 */
++      u32 p1recvdtcpcksmerrs; /* DWORD 90 */
++      u32 p1recvdudpcksmerrs; /* DWORD 91 */
++      u32 p1recvdnonrsspackets;       /* DWORD 92 */
++      u32 p1recvdippackets;   /* DWORD 93 */
++      u32 p1recvdchute1packets;       /* DWORD 94 */
++      u32 p1recvdchute2packets;       /* DWORD 95 */
++      u32 p1recvdchute3packets;       /* DWORD 96 */
++      u32 p1recvdipsecpackets;        /* DWORD 97 */
++      u32 p1recvdmanagementpackets;   /* DWORD 98 */
++      u32 p1xmitbyteslsd;     /* DWORD 99 */
++      u32 p1xmitbytesmsd;     /* DWORD 100 */
++      u32 p1xmitunicastframes;        /* DWORD 101 */
++      u32 p1xmitmulticastframes;      /* DWORD 102 */
++      u32 p1xmitbroadcastframes;      /* DWORD 103 */
++      u32 p1xmitpauseframes;  /* DWORD 104 */
++      u32 p1xmitcontrolframes;        /* DWORD 105 */
++      u32 p1xmit64;           /* DWORD 106 */
++      u32 p1xmit65_127;       /* DWORD 107 */
++      u32 p1xmit128_256;      /* DWORD 108 */
++      u32 p1xmit256_511;      /* DWORD 109 */
++      u32 p1xmit512_1023;     /* DWORD 110 */
++      u32 p1xmit1518_1522;    /* DWORD 111 */
++      u32 p1xmit1522_2047;    /* DWORD 112 */
++      u32 p1xmit2048_4095;    /* DWORD 113 */
++      u32 p1xmit4096_8191;    /* DWORD 114 */
++      u32 p1xmit8192_9216;    /* DWORD 115 */
++      u32 p1rxfifooverflowdropped;    /* DWORD 116 */
++      u32 p1ipseclookupfaileddropped; /* DWORD 117 */
++      u32 pxdroppednopbuf;    /* DWORD 118 */
++      u32 pxdroppednotxpb;    /* DWORD 119 */
++      u32 pxdroppednoipsecbuf;        /* DWORD 120 */
++      u32 pxdroppednoerxdescr;        /* DWORD 121 */
++      u32 pxdroppednotpredescr;       /* DWORD 122 */
++      u32 pxrecvdmanagementportpackets;       /* DWORD 123 */
++      u32 pxrecvdmanagementportbytes; /* DWORD 124 */
++      u32 pxrecvdmanagementportpauseframes;   /* DWORD 125 */
++      u32 pxrecvdmanagementporterrors;        /* DWORD 126 */
++      u32 pxxmitmanagementportpackets;        /* DWORD 127 */
++      u32 pxxmitmanagementportbytes;  /* DWORD 128 */
++      u32 pxxmitmanagementportpause;  /* DWORD 129 */
++      u32 pxxmitmanagementportrxfifooverflow; /* DWORD 130 */
++      u32 pxrecvdipsecipcksmerrs;     /* DWORD 131 */
++      u32 pxrecvdtcpsecipcksmerrs;    /* DWORD 132 */
++      u32 pxrecvdudpsecipcksmerrs;    /* DWORD 133 */
++      u32 pxipsecrunt;        /* DWORD 134 */
++      u32 pxipsecaddressmismatchdropped;      /* DWORD 135 */
++      u32 pxipsecrxfifooverflowdropped;       /* DWORD 136 */
++      u32 pxipsecframestoolong;       /* DWORD 137 */
++      u32 pxipsectotalipframes;       /* DWORD 138 */
++      u32 pxipseciptoosmall;  /* DWORD 139 */
++      u32 pxipseciptooshort;  /* DWORD 140 */
++      u32 pxipseciphdrtoosmall;       /* DWORD 141 */
++      u32 pxipsectcphdrbad;   /* DWORD 142 */
++      u32 pxrecvdipsecchute1; /* DWORD 143 */
++      u32 pxrecvdipsecchute2; /* DWORD 144 */
++      u32 pxrecvdipsecchute3; /* DWORD 145 */
++      u32 pxdropped7frags;    /* DWORD 146 */
++      u32 pxdroppedfrags;     /* DWORD 147 */
++      u32 pxdroppedinvalidfragring;   /* DWORD 148 */
++      u32 pxnumforwardedpackets;      /* DWORD 149 */
++} __packed;
++
++union MIB_ETH_STATISTICS_PARAMS {
++      struct MIB_ETH_STATISTICS_PARAMS_IN request;
++      struct BE_RXF_STATS response;
++} __packed;
++
++/*
++ *  Query ethernet statistics. All domains may issue this command. The
++ *  host domain drivers  may optionally reset internal statistic counters
++ *  with a query.
++ */
++struct FWCMD_ETH_GET_STATISTICS {
++      union FWCMD_HEADER header;
++      union MIB_ETH_STATISTICS_PARAMS params;
++} __packed;
++
++
++struct FWCMD_ETH_ANON_175_REQUEST {
++      u8 port0_promiscuous;
++      u8 port1_promiscuous;
++      u16 rsvd0;
++} __packed;
++
++struct FWCMD_ETH_ANON_176_RESPONSE {
++      u32 rsvd0;
++} __packed;
++
++union FWCMD_ETH_ANON_174_PARAMS {
++      struct FWCMD_ETH_ANON_175_REQUEST request;
++      struct FWCMD_ETH_ANON_176_RESPONSE response;
++} __packed;
++
++/* Enables/Disables promiscuous ethernet receive mode.  */
++struct FWCMD_ETH_PROMISCUOUS {
++      union FWCMD_HEADER header;
++      union FWCMD_ETH_ANON_174_PARAMS params;
++} __packed;
++
++struct FWCMD_ETH_ANON_178_REQUEST {
++      u32 new_fragsize_log2;
++} __packed;
++
++struct FWCMD_ETH_ANON_179_RESPONSE {
++      u32 actual_fragsize_log2;
++} __packed;
++
++union FWCMD_ETH_ANON_177_PARAMS {
++      struct FWCMD_ETH_ANON_178_REQUEST request;
++      struct FWCMD_ETH_ANON_179_RESPONSE response;
++} __packed;
++
++/*
++ *  Sets the Ethernet RX fragment size. Only host (domain 0) networking
++ *  drivers may issue  this command.  This call will fail for non-host
++ *  protection domains. In this situation the  MCC CQ status will indicate
++ *  a failure due to insufficient priviledges. The response  should be
++ *  ignored, and the driver should use the FWCMD_ETH_GET_FRAG_SIZE to
++ *  query the  existing ethernet receive fragment size. It must use this
++ *  fragment size for all  fragments in the ethernet receive ring.  If
++ *  the command succeeds, the driver must use the  frag size indicated
++ *  in the command response since the requested frag size may not be  applied
++ *  until the next reboot. When the requested fragsize matches the response
++ *   fragsize, this indicates the request was applied immediately.
++ */
++struct FWCMD_ETH_SET_RX_FRAG_SIZE {
++      union FWCMD_HEADER header;
++      union FWCMD_ETH_ANON_177_PARAMS params;
++} __packed;
++
++struct FWCMD_ETH_ANON_181_REQUEST {
++      u32 rsvd0;
++} __packed;
++
++struct FWCMD_ETH_ANON_182_RESPONSE {
++      u32 actual_fragsize_log2;
++} __packed;
++
++union FWCMD_ETH_ANON_180_PARAMS {
++      struct FWCMD_ETH_ANON_181_REQUEST request;
++      struct FWCMD_ETH_ANON_182_RESPONSE response;
++} __packed;
++
++/*
++ *  Queries the Ethernet RX fragment size. All domains may issue this
++ *  command.  The driver  should call this command to determine the minimum
++ *  required fragment size for the ethernet  RX ring buffers. Drivers
++ *  may choose to use a larger size for each fragment buffer, but  BladeEngine
++ *  will use up to the configured minimum required fragsize in each ethernet
++ *   receive fragment buffer. For example, if the ethernet receive fragment
++ *  size is  configured to 4kB, and a driver uses 8kB fragments, a 6kB
++ *  ethernet packet received by  BladeEngine will be split accross two
++ *  of the driver's receive framgents (4kB in one  fragment buffer, and
++ *  2kB in the subsequent fragment buffer).
++ */
++struct FWCMD_ETH_GET_RX_FRAG_SIZE {
++      union FWCMD_HEADER header;
++      union FWCMD_ETH_ANON_180_PARAMS params;
++} __packed;
++
++#endif /* __fwcmd_eth_bmap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_hdr_bmap.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_hdr_bmap.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_hdr_bmap.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_hdr_bmap.h       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_hdr_bmap_h__
++#define __fwcmd_hdr_bmap_h__
++
++struct FWCMD_REQUEST_HEADER {
++      u8 opcode;
++      u8 subsystem;
++      u8 port_number;
++      u8 domain;
++      u32 timeout;
++      u32 request_length;
++      u32 rsvd0;
++} __packed;
++
++struct FWCMD_RESPONSE_HEADER {
++      u8 opcode;
++      u8 subsystem;
++      u8 rsvd0;
++      u8 domain;
++      u8 status;
++      u8 additional_status;
++      u16 rsvd1;
++      u32 response_length;
++      u32 actual_response_length;
++} __packed;
++
++/*
++ *  The firmware/driver overwrites the input FWCMD_REQUEST_HEADER with
++ *  the output  FWCMD_RESPONSE_HEADER.
++ */
++union FWCMD_HEADER {
++      struct FWCMD_REQUEST_HEADER request;
++      struct FWCMD_RESPONSE_HEADER response;
++} __packed;
++
++#endif /* __fwcmd_hdr_bmap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_mcc.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_mcc.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_mcc.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_mcc.h    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,94 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_mcc_amap_h__
++#define __fwcmd_mcc_amap_h__
++#include "fwcmd_opcodes.h"
++/*
++ * Where applicable, a WRB, may contain a list of Scatter-gather elements.
++ * Each element supports a 64 bit address and a 32bit length field.
++ */
++struct BE_MCC_SGE_AMAP {
++      u8 pa_lo[32];   /* DWORD 0 */
++      u8 pa_hi[32];   /* DWORD 1 */
++      u8 length[32];  /* DWORD 2 */
++} __packed;
++struct MCC_SGE_AMAP {
++      u32 dw[3];
++};
++/*
++ * The design of an MCC_SGE allows up to 19 elements to be embedded
++ * in a WRB, supporting 64KB data transfers (assuming a 4KB page size).
++ */
++struct BE_MCC_WRB_PAYLOAD_AMAP {
++      union {
++              struct BE_MCC_SGE_AMAP sgl[19];
++              u8 embedded[59][32];    /* DWORD 0 */
++      };
++} __packed;
++struct MCC_WRB_PAYLOAD_AMAP {
++      u32 dw[59];
++};
++
++/*
++ * This is the structure of the MCC Command WRB for commands
++ * sent to the Management Processing Unit (MPU). See section
++ * for usage in embedded and non-embedded modes.
++ */
++struct BE_MCC_WRB_AMAP {
++      u8 embedded;    /* DWORD 0 */
++      u8 rsvd0[2];    /* DWORD 0 */
++      u8 sge_count[5];        /* DWORD 0 */
++      u8 rsvd1[16];   /* DWORD 0 */
++      u8 special[8];  /* DWORD 0 */
++      u8 payload_length[32];  /* DWORD 1 */
++      u8 tag[2][32];  /* DWORD 2 */
++      u8 rsvd2[32];   /* DWORD 4 */
++      struct BE_MCC_WRB_PAYLOAD_AMAP payload;
++} __packed;
++struct MCC_WRB_AMAP {
++      u32 dw[64];
++};
++
++/*  This is the structure of the MCC Completion queue entry  */
++struct BE_MCC_CQ_ENTRY_AMAP {
++      u8 completion_status[16];       /* DWORD 0 */
++      u8 extended_status[16]; /* DWORD 0 */
++      u8 mcc_tag[2][32];      /* DWORD 1 */
++      u8 rsvd0[27];   /* DWORD 3 */
++      u8 consumed;    /* DWORD 3 */
++      u8 completed;   /* DWORD 3 */
++      u8 hpi_buffer_completion;       /* DWORD 3 */
++      u8 async_event; /* DWORD 3 */
++      u8 valid;               /* DWORD 3 */
++} __packed;
++struct MCC_CQ_ENTRY_AMAP {
++      u32 dw[4];
++};
++
++/* Mailbox structures used by the MPU during bootstrap */
++struct BE_MCC_MAILBOX_AMAP {
++      struct BE_MCC_WRB_AMAP wrb;
++      struct BE_MCC_CQ_ENTRY_AMAP cq;
++} __packed;
++struct MCC_MAILBOX_AMAP {
++      u32 dw[68];
++};
++
++#endif /* __fwcmd_mcc_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_opcodes.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_opcodes.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_opcodes.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_opcodes.h        2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_opcodes_amap_h__
++#define __fwcmd_opcodes_amap_h__
++
++/*
++ * --- FWCMD_SUBSYSTEMS ---
++ * The commands are grouped into the following subsystems. The subsystem
++ * code along with the opcode uniquely identify a particular fwcmd.
++ */
++#define FWCMD_SUBSYSTEM_RSVD  (0)     /* This subsystem is reserved. It is */
++                                                /* never used. */
++#define FWCMD_SUBSYSTEM_COMMON (1)    /* CMDs in this group are common to
++                                      * all subsystems. See
++                                      * COMMON_SUBSYSTEM_OPCODES for opcodes
++                                      * and Common Host Configuration CMDs
++                                      * for the FWCMD descriptions.
++                                      */
++#define FWCMD_SUBSYSTEM_COMMON_ISCSI    (2) /* CMDs in this group are */
++                                      /*
++                                      * common to Initiator and Target. See
++                                      * COMMON_ISCSI_SUBSYSTEM_OPCODES and
++                                      * Common iSCSI Initiator and Target
++                                      * CMDs for the command descriptions.
++                                      */
++#define FWCMD_SUBSYSTEM_ETH             (3)   /* This subsystem is used to
++                                              execute  Ethernet commands.  */
++
++#define FWCMD_SUBSYSTEM_TPM             (4)   /* This subsystem is used
++                                               to execute TPM  commands.  */
++#define FWCMD_SUBSYSTEM_PXE_UNDI        (5)   /* This subsystem is used
++                                              * to execute PXE
++                                              * and UNDI specific commands.
++                                              */
++
++#define FWCMD_SUBSYSTEM_ISCSI_INI       (6)   /* This subsystem is used to
++                                              execute ISCSI Initiator
++                                              specific commands.
++                                              */
++#define FWCMD_SUBSYSTEM_ISCSI_TGT       (7)   /* This subsystem is used
++                                              to execute iSCSI Target
++                                              specific commands.between
++                                              PTL and ARM firmware.
++                                              */
++#define FWCMD_SUBSYSTEM_MILI_PTL        (8)   /* This subsystem is used to
++                                              execute iSCSI Target specific
++                                              commands.between MILI
++                                              and PTL.  */
++#define FWCMD_SUBSYSTEM_MILI_TMD        (9)   /* This subsystem is used to
++                                              execute iSCSI Target specific
++                                              commands between MILI
++                                              and TMD.  */
++#define FWCMD_SUBSYSTEM_PROXY           (11)  /* This subsystem is used
++                                              to execute proxied commands
++                                              within the host at the
++                                              explicit request of a
++                                              non priviledged domain.
++                                              This 'subsystem' is entirely
++                                              virtual from the controller
++                                              and firmware perspective as
++                                              it is implemented in host
++                                              drivers.
++                                              */
++
++/*
++ * --- COMMON_SUBSYSTEM_OPCODES ---
++ * These opcodes are common to both networking and storage PCI
++ * functions. They are used to reserve resources and configure
++ * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
++ * subsystem code.
++ */
++#define OPCODE_COMMON_NTWK_MAC_QUERY    (1)
++#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
++#define SUBSYSTEM_COMMON_NTWK_MAC_SET   (1)
++#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
++#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
++#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
++#define SUBSYSTEM_COMMON_READ_FLASHROM  (1)
++#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
++#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
++#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
++#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
++#define SUBSYSTEM_COMMON_RING_DESTROY   (1)
++#define SUBSYSTEM_COMMON_CQ_CREATE      (1)
++#define SUBSYSTEM_COMMON_EQ_CREATE      (1)
++#define SUBSYSTEM_COMMON_ETH_RX_CREATE  (1)
++#define SUBSYSTEM_COMMON_ETH_TX_CREATE  (1)
++#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
++#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
++#define SUBSYSTEM_COMMON_MCC_CREATE     (1)
++#define SUBSYSTEM_COMMON_JELL_CONFIG    (1)
++#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
++#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
++#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
++#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
++#define SUBSYSTEM_COMMON_GET_QOS        (1)
++#define SUBSYSTEM_COMMON_SET_QOS        (1)
++#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
++#define SUBSYSTEM_COMMON_SEEPROM_READ   (1)
++#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
++#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
++#define SUBSYSTEM_COMMON_NOP            (1)
++#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
++#define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
++#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
++#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
++#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
++#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
++#define SUBSYSTEM_COMMON_GET_FAT        (1)
++#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
++#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
++#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
++#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
++#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
++#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
++#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
++#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
++#define SUBSYSTEM_COMMON_RED_CONFIG     (1)
++#define OPCODE_COMMON_NTWK_MAC_SET      (2)
++#define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
++#define OPCODE_COMMON_NTWK_VLAN_CONFIG  (4)
++#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
++#define OPCODE_COMMON_READ_FLASHROM     (6)
++#define OPCODE_COMMON_WRITE_FLASHROM    (7)
++#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
++#define OPCODE_COMMON_ADD_PAGE_TABLES   (9)
++#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
++#define OPCODE_COMMON_RING_DESTROY      (11)
++#define OPCODE_COMMON_CQ_CREATE         (12)
++#define OPCODE_COMMON_EQ_CREATE         (13)
++#define OPCODE_COMMON_ETH_RX_CREATE     (14)
++#define OPCODE_COMMON_ETH_TX_CREATE     (15)
++#define OPCODE_COMMON_NET_RESERVED0     (16)  /* Reserved */
++#define OPCODE_COMMON_NET_RESERVED1     (17)  /* Reserved */
++#define OPCODE_COMMON_NET_RESERVED2     (18)  /* Reserved */
++#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
++#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
++#define OPCODE_COMMON_MCC_CREATE        (21)
++#define OPCODE_COMMON_JELL_CONFIG       (22)
++#define OPCODE_COMMON_FORCE_FAILOVER    (23)
++#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
++#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
++#define OPCODE_COMMON_POST_ZERO_BUFFER  (26)
++#define OPCODE_COMMON_GET_QOS           (27)
++#define OPCODE_COMMON_SET_QOS           (28)
++#define OPCODE_COMMON_TCP_GET_STATISTICS (29)
++#define OPCODE_COMMON_SEEPROM_READ      (30)
++#define OPCODE_COMMON_TCP_STATE_QUERY   (31)
++#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
++#define OPCODE_COMMON_NOP               (33)
++#define OPCODE_COMMON_NTWK_RX_FILTER    (34)
++#define OPCODE_COMMON_GET_FW_VERSION    (35)
++#define OPCODE_COMMON_SET_FLOW_CONTROL  (36)
++#define OPCODE_COMMON_GET_FLOW_CONTROL  (37)
++#define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
++#define OPCODE_COMMON_SET_FRAME_SIZE    (39)
++#define OPCODE_COMMON_GET_FAT           (40)
++#define OPCODE_COMMON_MODIFY_EQ_DELAY   (41)
++#define OPCODE_COMMON_FIRMWARE_CONFIG   (42)
++#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
++#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
++#define OPCODE_COMMON_SET_VLD_CONFIG    (45)
++#define OPCODE_COMMON_GET_VLD_CONFIG    (46)
++#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
++#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
++#define OPCODE_COMMON_RED_CONFIG        (49)
++
++
++
++/*
++ * --- ETH_SUBSYSTEM_OPCODES ---
++ * These opcodes are used for configuring the Ethernet interfaces. These
++ * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
++ */
++#define OPCODE_ETH_RSS_CONFIG           (1)
++#define OPCODE_ETH_ACPI_CONFIG          (2)
++#define SUBSYSTEM_ETH_RSS_CONFIG        (3)
++#define SUBSYSTEM_ETH_ACPI_CONFIG       (3)
++#define OPCODE_ETH_PROMISCUOUS          (3)
++#define SUBSYSTEM_ETH_PROMISCUOUS       (3)
++#define SUBSYSTEM_ETH_GET_STATISTICS    (3)
++#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE  (3)
++#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE  (3)
++#define OPCODE_ETH_GET_STATISTICS       (4)
++#define OPCODE_ETH_GET_RX_FRAG_SIZE     (5)
++#define OPCODE_ETH_SET_RX_FRAG_SIZE     (6)
++
++
++
++
++
++/*
++ * --- MCC_STATUS_CODE ---
++ * These are the global status codes used by all subsystems
++ */
++#define MCC_STATUS_SUCCESS              (0)   /* Indicates a successful
++                                              completion of  the command */
++#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1)        /* The client does not have
++                                              sufficient privileges to
++                                              execute the command */
++#define MCC_STATUS_INVALID_PARAMETER    (2)   /* A parameter in the command
++                                              was invalid. The extended
++                                              status contains the index
++                                              of the parameter */
++#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient
++                                              chip resources to execute
++                                              the command */
++#define MCC_STATUS_QUEUE_FLUSHING       (4)   /* The command is completing
++                                              because the queue was
++                                              getting flushed */
++#define MCC_STATUS_DMA_FAILED           (5)   /* The command is completing
++                                              with a DMA error */
++
++/*
++ * --- MGMT_ERROR_CODES ---
++ * Error Codes returned in the status field of the FWCMD response header
++ */
++#define MGMT_STATUS_SUCCESS             (0)   /* The FWCMD completed
++                                              without errors */
++#define MGMT_STATUS_FAILED              (1)   /* Error status in the Status
++                                              field of  the
++                                              struct FWCMD_RESPONSE_HEADER */
++#define MGMT_STATUS_ILLEGAL_REQUEST     (2)   /* Invalid FWCMD opcode */
++#define MGMT_STATUS_ILLEGAL_FIELD       (3)   /* Invalid parameter in
++                                              the FWCMD  payload */
++
++#endif /* __fwcmd_opcodes_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/fwcmd_types_bmap.h linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_types_bmap.h
+--- linux-2.6.29.owrt/drivers/staging/benet/fwcmd_types_bmap.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/fwcmd_types_bmap.h     2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __fwcmd_types_bmap_h__
++#define __fwcmd_types_bmap_h__
++
++/* MAC address format  */
++struct MAC_ADDRESS_FORMAT {
++      u16 SizeOfStructure;
++      u8 MACAddress[6];
++} __packed;
++
++#endif /* __fwcmd_types_bmap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/host_struct.h linux-2.6.29-rc3.owrt/drivers/staging/benet/host_struct.h
+--- linux-2.6.29.owrt/drivers/staging/benet/host_struct.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/host_struct.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,182 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __host_struct_amap_h__
++#define __host_struct_amap_h__
++#include "be_cm.h"
++#include "be_common.h"
++#include "descriptors.h"
++
++/* --- EQ_COMPLETION_MAJOR_CODE_ENUM --- */
++#define EQ_MAJOR_CODE_COMPLETION        (0)   /* Completion event on a */
++                                                /* qcompletion ueue. */
++#define EQ_MAJOR_CODE_ETH               (1)   /* Affiliated Ethernet Event. */
++#define EQ_MAJOR_CODE_RESERVED          (2)   /* Reserved */
++#define EQ_MAJOR_CODE_RDMA              (3)   /* Affiliated RDMA Event. */
++#define EQ_MAJOR_CODE_ISCSI             (4)   /* Affiliated ISCSI Event */
++#define EQ_MAJOR_CODE_UNAFFILIATED      (5)   /* Unaffiliated Event */
++
++/* --- EQ_COMPLETION_MINOR_CODE_ENUM --- */
++#define EQ_MINOR_CODE_COMPLETION        (0)   /* Completion event on a */
++                                                /* completion queue. */
++#define EQ_MINOR_CODE_OTHER             (1)   /* Other Event (TBD). */
++
++/* Queue Entry Definition for all 4 byte event queue types. */
++struct BE_EQ_ENTRY_AMAP {
++      u8 Valid;               /* DWORD 0 */
++      u8 MajorCode[3];        /* DWORD 0 */
++      u8 MinorCode[12];       /* DWORD 0 */
++      u8 ResourceID[16];      /* DWORD 0 */
++} __packed;
++struct EQ_ENTRY_AMAP {
++      u32 dw[1];
++};
++
++/*
++ * --- ETH_EVENT_CODE ---
++ * These codes are returned by the MPU when one of these events has occurred,
++ * and the event is configured to report to an Event Queue when an event
++ * is detected.
++ */
++#define ETH_EQ_LINK_STATUS              (0)   /* Link status change event */
++                                                /* detected. */
++#define ETH_EQ_WATERMARK                (1)   /* watermark event detected. */
++#define ETH_EQ_MAGIC_PKT                (2)   /* magic pkt event detected. */
++#define ETH_EQ_ACPI_PKT0                (3)   /* ACPI interesting packet */
++                                                /* detected. */
++#define ETH_EQ_ACPI_PKT1                (3)   /* ACPI interesting packet */
++                                                /* detected. */
++#define ETH_EQ_ACPI_PKT2                (3)   /* ACPI interesting packet */
++                                                /* detected. */
++#define ETH_EQ_ACPI_PKT3                (3)   /* ACPI interesting packet */
++                                                /* detected. */
++
++/*
++ * --- ETH_TX_COMPL_STATUS_ENUM ---
++ * Status codes contained in Ethernet TX completion descriptors.
++ */
++#define ETH_COMP_VALID                  (0)
++#define ETH_COMP_ERROR                  (1)
++#define ETH_COMP_INVALID                (15)
++
++/*
++ * --- ETH_TX_COMPL_PORT_ENUM ---
++ * Port indicator contained in Ethernet TX completion descriptors.
++ */
++#define ETH_COMP_PORT0                  (0)
++#define ETH_COMP_PORT1                  (1)
++#define ETH_COMP_MGMT                   (2)
++
++/*
++ * --- ETH_TX_COMPL_CT_ENUM ---
++ * Completion type indicator contained in Ethernet TX completion descriptors.
++ */
++#define ETH_COMP_ETH                    (0)
++
++/*
++ * Work request block that the driver issues to the chip for
++ * Ethernet transmissions. All control fields must be valid in each WRB for
++ * a message. The controller, as specified by the flags, optionally writes
++ * an entry to the Completion Ring and generate an event.
++ */
++struct BE_ETH_WRB_AMAP {
++      u8 frag_pa_hi[32];      /* DWORD 0 */
++      u8 frag_pa_lo[32];      /* DWORD 1 */
++      u8 complete;    /* DWORD 2 */
++      u8 event;               /* DWORD 2 */
++      u8 crc;         /* DWORD 2 */
++      u8 forward;             /* DWORD 2 */
++      u8 ipsec;               /* DWORD 2 */
++      u8 mgmt;                /* DWORD 2 */
++      u8 ipcs;                /* DWORD 2 */
++      u8 udpcs;               /* DWORD 2 */
++      u8 tcpcs;               /* DWORD 2 */
++      u8 lso;         /* DWORD 2 */
++      u8 last;                /* DWORD 2 */
++      u8 vlan;                /* DWORD 2 */
++      u8 dbg[3];              /* DWORD 2 */
++      u8 hash_val[3]; /* DWORD 2 */
++      u8 lso_mss[14]; /* DWORD 2 */
++      u8 frag_len[16];        /* DWORD 3 */
++      u8 vlan_tag[16];        /* DWORD 3 */
++} __packed;
++struct ETH_WRB_AMAP {
++      u32 dw[4];
++};
++
++/* This is an Ethernet transmit completion descriptor */
++struct BE_ETH_TX_COMPL_AMAP {
++      u8 user_bytes[16];      /* DWORD 0 */
++      u8 nwh_bytes[8];        /* DWORD 0 */
++      u8 lso;         /* DWORD 0 */
++      u8 rsvd0[7];    /* DWORD 0 */
++      u8 wrb_index[16];       /* DWORD 1 */
++      u8 ct[2];               /* DWORD 1 */
++      u8 port[2];             /* DWORD 1 */
++      u8 rsvd1[8];    /* DWORD 1 */
++      u8 status[4];   /* DWORD 1 */
++      u8 rsvd2[16];   /* DWORD 2 */
++      u8 ringid[11];  /* DWORD 2 */
++      u8 hash_val[4]; /* DWORD 2 */
++      u8 valid;               /* DWORD 2 */
++      u8 rsvd3[32];   /* DWORD 3 */
++} __packed;
++struct ETH_TX_COMPL_AMAP {
++      u32 dw[4];
++};
++
++/* Ethernet Receive Buffer descriptor */
++struct BE_ETH_RX_D_AMAP {
++      u8 fragpa_hi[32];       /* DWORD 0 */
++      u8 fragpa_lo[32];       /* DWORD 1 */
++} __packed;
++struct ETH_RX_D_AMAP {
++      u32 dw[2];
++};
++
++/* This is an Ethernet Receive Completion Descriptor */
++struct BE_ETH_RX_COMPL_AMAP {
++      u8 vlan_tag[16];        /* DWORD 0 */
++      u8 pktsize[14]; /* DWORD 0 */
++      u8 port;                /* DWORD 0 */
++      u8 rsvd0;               /* DWORD 0 */
++      u8 err;         /* DWORD 1 */
++      u8 rsshp;               /* DWORD 1 */
++      u8 ipf;         /* DWORD 1 */
++      u8 tcpf;                /* DWORD 1 */
++      u8 udpf;                /* DWORD 1 */
++      u8 ipcksm;              /* DWORD 1 */
++      u8 tcpcksm;             /* DWORD 1 */
++      u8 udpcksm;             /* DWORD 1 */
++      u8 macdst[6];   /* DWORD 1 */
++      u8 vtp;         /* DWORD 1 */
++      u8 vtm;         /* DWORD 1 */
++      u8 fragndx[10]; /* DWORD 1 */
++      u8 ct[2];               /* DWORD 1 */
++      u8 ipsec;               /* DWORD 1 */
++      u8 numfrags[3]; /* DWORD 1 */
++      u8 rsvd1[31];   /* DWORD 2 */
++      u8 valid;               /* DWORD 2 */
++      u8 rsshash[32]; /* DWORD 3 */
++} __packed;
++struct ETH_RX_COMPL_AMAP {
++      u32 dw[4];
++};
++
++#endif /* __host_struct_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/hwlib.h linux-2.6.29-rc3.owrt/drivers/staging/benet/hwlib.h
+--- linux-2.6.29.owrt/drivers/staging/benet/hwlib.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/hwlib.h        2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,830 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#ifndef __hwlib_h__
++#define __hwlib_h__
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++
++#include "regmap.h"           /* srcgen array map output */
++
++#include "asyncmesg.h"
++#include "fwcmd_opcodes.h"
++#include "post_codes.h"
++#include "fwcmd_mcc.h"
++
++#include "fwcmd_types_bmap.h"
++#include "fwcmd_common_bmap.h"
++#include "fwcmd_eth_bmap.h"
++#include "bestatus.h"
++/*
++ *
++ * Macros for reading/writing a protection domain or CSR registers
++ * in BladeEngine.
++ */
++#define PD_READ(fo, field)    ioread32((fo)->db_va + \
++              offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
++
++#define PD_WRITE(fo, field, val) iowrite32(val, (fo)->db_va + \
++              offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
++
++#define CSR_READ(fo, field)   ioread32((fo)->csr_va + \
++              offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
++
++#define CSR_WRITE(fo, field, val)     iowrite32(val, (fo)->csr_va + \
++              offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
++
++#define PCICFG0_READ(fo, field)       ioread32((fo)->pci_va + \
++              offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
++
++#define PCICFG0_WRITE(fo, field, val) iowrite32(val, (fo)->pci_va + \
++              offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
++
++#define PCICFG1_READ(fo, field)       ioread32((fo)->pci_va + \
++              offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
++
++#define PCICFG1_WRITE(fo, field, val) iowrite32(val, (fo)->pci_va + \
++              offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
++
++#ifdef BE_DEBUG
++#define ASSERT(c)       BUG_ON(!(c));
++#else
++#define ASSERT(c)
++#endif
++
++/* debug levels */
++enum BE_DEBUG_LEVELS {
++      DL_ALWAYS = 0,          /* cannot be masked */
++      DL_ERR = 0x1,           /* errors that should never happen */
++      DL_WARN = 0x2,          /* something questionable.
++                                 recoverable errors */
++      DL_NOTE = 0x4,          /* infrequent, important debug info */
++      DL_INFO = 0x8,          /* debug information */
++      DL_VERBOSE = 0x10,      /* detailed info, such as buffer traces */
++      BE_DL_MIN_VALUE = 0x1,  /* this is the min value used */
++      BE_DL_MAX_VALUE = 0x80  /* this is the higheset value used */
++} ;
++
++extern unsigned int trace_level;
++
++#define TRACE(lm, fmt, args...)  {                            \
++              if (trace_level & lm) {                         \
++                      printk(KERN_NOTICE "BE: %s:%d \n" fmt,  \
++                      __FILE__ , __LINE__ , ## args);         \
++              }                                               \
++      }
++
++static inline unsigned int be_trace_set_level(unsigned int level)
++{
++      unsigned int old_level = trace_level;
++      trace_level = level;
++      return old_level;
++}
++
++#define be_trace_get_level()  trace_level
++/*
++ * Returns number of pages spanned by the size of data
++ * starting at the given address.
++ */
++#define PAGES_SPANNED(_address, _size) \
++   ((u32)((((size_t)(_address) & (PAGE_SIZE - 1)) + \
++              (_size) + (PAGE_SIZE - 1)) >> PAGE_SHIFT))
++/* Byte offset into the page corresponding to given address */
++#define OFFSET_IN_PAGE(_addr_) ((size_t)(_addr_) & (PAGE_SIZE-1))
++
++/*
++ * circular subtract.
++ * Returns a - b assuming a circular number system, where a and b are
++ * in range (0, maxValue-1). If a==b, zero is returned so the
++ * highest value possible with this subtraction is maxValue-1.
++ */
++static inline u32 be_subc(u32 a, u32 b, u32 max)
++{
++      ASSERT(a <= max && b <= max);
++      ASSERT(max > 0);
++      return a >= b ? (a - b) : (max - b + a);
++}
++
++static inline u32 be_addc(u32 a, u32 b, u32 max)
++{
++      ASSERT(a < max);
++      ASSERT(max > 0);
++      return (max - a > b) ? (a + b) : (b + a - max);
++}
++
++/* descriptor for a physically contiguous memory used for ring */
++struct ring_desc {
++      u32 length;     /* length in bytes */
++      void *va;       /* virtual address */
++      u64 pa;         /* bus address */
++} ;
++
++/*
++ * This structure stores information about a ring shared between hardware
++ * and software.  Each ring is allocated by the driver in the uncached
++ * extension and mapped into BladeEngine's unified table.
++ */
++struct mp_ring {
++      u32 pages;              /* queue size in pages */
++      u32 id;                 /* queue id assigned by beklib */
++      u32 num;                /* number of elements in queue */
++      u32 cidx;               /* consumer index */
++      u32 pidx;               /* producer index -- not used by most rings */
++      u32 itemSize;           /* size in bytes of one object */
++
++      void *va;               /* The virtual address of the ring.
++                                 This should be last to allow 32 & 64
++                                 bit debugger extensions to work. */
++} ;
++
++/*-----------  amap bit filed get / set macros and functions -----*/
++/*
++ * Structures defined in the map header files (under fw/amap/) with names
++ * in the format BE_<name>_AMAP are pseudo structures with members
++ * of type u8. These structures are templates that are used in
++ * conjuntion with the structures with names in the format
++ * <name>_AMAP to calculate the bit masks and bit offsets to get or set
++ * bit fields in structures. The structures <name>_AMAP are arrays
++ * of 32 bits words and have the correct size.  The following macros
++ * provide convenient ways to get and set the various members
++ * in the structures without using strucctures with bit fields.
++ * Always use the macros AMAP_GET_BITS_PTR and AMAP_SET_BITS_PTR
++ * macros to extract and set various members.
++ */
++
++/*
++ * Returns the a bit mask for the register that is NOT shifted into location.
++ * That means return values always look like: 0x1, 0xFF, 0x7FF, etc...
++ */
++static inline u32 amap_mask(u32 bit_size)
++{
++      return bit_size == 32 ? 0xFFFFFFFF : (1 << bit_size) - 1;
++}
++
++#define AMAP_BIT_MASK(_struct_, field)       \
++      amap_mask(AMAP_BIT_SIZE(_struct_, field))
++
++/*
++ * non-optimized set bits function. First clears the bits and then assigns them.
++ * This does not require knowledge of the particular DWORD you are setting.
++ * e.g. AMAP_SET_BITS_PTR (struct, field1, &contextMemory, 123);
++ */
++static inline void
++amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
++{
++      u32 *dw = (u32 *)ptr;
++      *(dw + dw_offset) &= ~(mask << offset);
++      *(dw + dw_offset) |= (mask & value) << offset;
++}
++
++#define AMAP_SET_BITS_PTR(_struct_, field, _structPtr_, val)  \
++      amap_set(_structPtr_, AMAP_WORD_OFFSET(_struct_, field),\
++              AMAP_BIT_MASK(_struct_, field),                 \
++              AMAP_BIT_OFFSET(_struct_, field), val)
++/*
++ * Non-optimized routine that gets the bits without knowing the correct DWORD.
++ * e.g. fieldValue = AMAP_GET_BITS_PTR (struct, field1, &contextMemory);
++ */
++static inline u32
++amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
++{
++      u32 *dw = (u32 *)ptr;
++      return mask & (*(dw + dw_offset) >> offset);
++}
++#define AMAP_GET_BITS_PTR(_struct_, field, _structPtr_)                       \
++      amap_get(_structPtr_, AMAP_WORD_OFFSET(_struct_, field),        \
++              AMAP_BIT_MASK(_struct_, field),                         \
++              AMAP_BIT_OFFSET(_struct_, field))
++
++/* Returns 0-31 representing bit offset within a DWORD of a bitfield. */
++#define AMAP_BIT_OFFSET(_struct_, field)                  \
++      (offsetof(struct BE_ ## _struct_ ## _AMAP, field) % 32)
++
++/* Returns 0-n representing DWORD offset of bitfield within the structure. */
++#define AMAP_WORD_OFFSET(_struct_, field)  \
++                (offsetof(struct BE_ ## _struct_ ## _AMAP, field)/32)
++
++/* Returns size of bitfield in bits. */
++#define AMAP_BIT_SIZE(_struct_, field) \
++              sizeof(((struct BE_ ## _struct_ ## _AMAP*)0)->field)
++
++struct be_mcc_wrb_response_copy {
++      u16 length;             /* bytes in response */
++      u16 fwcmd_offset;       /* offset within the wrb of the response */
++      void *va;               /* user's va to copy response into */
++
++} ;
++typedef void (*mcc_wrb_cqe_callback) (void *context, int status,
++                              struct MCC_WRB_AMAP *optional_wrb);
++struct be_mcc_wrb_context {
++
++      mcc_wrb_cqe_callback internal_cb;       /* Function to call on
++                                              completion */
++      void *internal_cb_context;      /* Parameter to pass
++                                                 to completion function */
++
++      mcc_wrb_cqe_callback cb;        /* Function to call on completion */
++      void *cb_context;       /* Parameter to pass to completion function */
++
++      int *users_final_status;        /* pointer to a local
++                                              variable for synchronous
++                                              commands */
++      struct MCC_WRB_AMAP *wrb;       /* pointer to original wrb for embedded
++                                              commands only */
++      struct list_head next;  /* links context structs together in
++                                 free list */
++
++      struct be_mcc_wrb_response_copy copy;   /* Optional parameters to copy
++                                         embedded response to user's va */
++
++#if defined(BE_DEBUG)
++      u16 subsystem, opcode;  /* Track this FWCMD for debug builds. */
++      struct MCC_WRB_AMAP *ring_wrb;
++      u32 consumed_count;
++#endif
++} ;
++
++/*
++    Represents a function object for network or storage.  This
++    is used to manage per-function resources like MCC CQs, etc.
++*/
++struct be_function_object {
++
++      u32 magic;              /*!< magic for detecting memory corruption. */
++
++      /* PCI BAR mapped addresses */
++      u8 __iomem *csr_va;     /* CSR */
++      u8 __iomem *db_va;      /* Door Bell */
++      u8 __iomem *pci_va;     /* PCI config space */
++      u32 emulate;            /* if set, MPU is not available.
++                                Emulate everything.     */
++      u32 pend_queue_driving; /* if set, drive the queued WRBs
++                                 after releasing the WRB lock */
++
++      spinlock_t post_lock;   /* lock for verifying one thread posting wrbs */
++      spinlock_t cq_lock;     /* lock for verifying one thread
++                                 processing cq */
++      spinlock_t mcc_context_lock;    /* lock for protecting mcc
++                                         context free list */
++      unsigned long post_irq;
++      unsigned long cq_irq;
++
++      u32 type;
++      u32 pci_function_number;
++
++      struct be_mcc_object *mcc;      /* mcc rings. */
++
++      struct {
++              struct MCC_MAILBOX_AMAP *va;    /* VA to the mailbox */
++              u64 pa; /* PA to the mailbox */
++              u32 length;     /* byte length of mailbox */
++
++              /* One default context struct used for posting at
++               * least one MCC_WRB
++               */
++              struct be_mcc_wrb_context default_context;
++              bool default_context_allocated;
++      } mailbox;
++
++      struct {
++
++              /* Wake on lans configured. */
++              u32 wol_bitmask;        /* bits 0,1,2,3 are set if
++                                         corresponding index is enabled */
++      } config;
++
++
++      struct BE_FIRMWARE_CONFIG fw_config;
++} ;
++
++/*
++      Represents an Event Queue
++*/
++struct be_eq_object {
++      u32 magic;
++      atomic_t ref_count;
++
++      struct be_function_object *parent_function;
++
++      struct list_head eq_list;
++      struct list_head cq_list_head;
++
++      u32 eq_id;
++      void *cb_context;
++
++} ;
++
++/*
++    Manages a completion queue
++*/
++struct be_cq_object {
++      u32 magic;
++      atomic_t ref_count;
++
++      struct be_function_object *parent_function;
++      struct be_eq_object *eq_object;
++
++      struct list_head cq_list;
++      struct list_head cqlist_for_eq;
++
++      void *va;
++      u32 num_entries;
++
++      void *cb_context;
++
++      u32 cq_id;
++
++} ;
++
++/*
++    Manages an ethernet send queue
++*/
++struct be_ethsq_object {
++      u32 magic;
++
++      struct list_head list;
++
++      struct be_function_object *parent_function;
++      struct be_cq_object *cq_object;
++      u32 bid;
++
++} ;
++
++/*
++@brief
++    Manages an ethernet receive queue
++*/
++struct be_ethrq_object {
++      u32 magic;
++      struct list_head list;
++      struct be_function_object *parent_function;
++      u32 rid;
++      struct be_cq_object *cq_object;
++      struct be_cq_object *rss_cq_object[4];
++
++} ;
++
++/*
++    Manages an MCC
++*/
++typedef void (*mcc_async_event_callback) (void *context, u32 event_code,
++                              void *event);
++struct be_mcc_object {
++      u32 magic;
++
++      struct be_function_object *parent_function;
++      struct list_head mcc_list;
++
++      struct be_cq_object *cq_object;
++
++      /* Async event callback for MCC CQ. */
++      mcc_async_event_callback async_cb;
++      void *async_context;
++
++      struct {
++              struct be_mcc_wrb_context *base;
++              u32 num;
++              struct list_head list_head;
++      } wrb_context;
++
++      struct {
++              struct ring_desc *rd;
++              struct mp_ring ring;
++      } sq;
++
++      struct {
++              struct mp_ring ring;
++      } cq;
++
++      u32 processing;         /* flag indicating that one thread
++                                 is processing CQ */
++      u32 rearm;              /* doorbell rearm setting to make
++                                 sure the active processing thread */
++      /* rearms the CQ if any of the threads requested it. */
++
++      struct list_head backlog;
++      u32 backlog_length;
++      u32 driving_backlog;
++      u32 consumed_index;
++
++} ;
++
++
++/* Queue context header -- the required software information for
++ * queueing a WRB.
++ */
++struct be_queue_driver_context {
++      mcc_wrb_cqe_callback internal_cb;       /* Function to call on
++                                                 completion */
++      void *internal_cb_context;      /* Parameter to pass
++                                                 to completion function */
++
++      mcc_wrb_cqe_callback cb;        /* Function to call on completion */
++      void *cb_context;       /* Parameter to pass to completion function */
++
++      struct be_mcc_wrb_response_copy copy;   /* Optional parameters to copy
++                                         embedded response to user's va */
++      void *optional_fwcmd_va;
++      struct list_head list;
++      u32 bytes;
++} ;
++
++/*
++ * Common MCC WRB header that all commands require.
++ */
++struct be_mcc_wrb_header {
++      u8 rsvd[offsetof(struct BE_MCC_WRB_AMAP, payload)/8];
++} ;
++
++/*
++ * All non embedded commands supported by hwlib functions only allow
++ * 1 SGE.  This queue context handles them all.
++ */
++struct be_nonembedded_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct MCC_SGE_AMAP sge[1];
++} ;
++
++/*
++ * ------------------------------------------------------------------------
++ *  This section contains the specific queue struct for each command.
++ *  The user could always provide a be_generic_q_ctxt but this is a
++ *  rather large struct.  By using the specific struct, memory consumption
++ *  can be reduced.
++ * ------------------------------------------------------------------------
++ */
++
++struct be_link_status_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY fwcmd;
++} ;
++
++struct be_multicast_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_NTWK_MULTICAST_SET fwcmd;
++} ;
++
++
++struct be_vlan_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_NTWK_VLAN_CONFIG fwcmd;
++} ;
++
++struct be_promiscuous_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_ETH_PROMISCUOUS fwcmd;
++} ;
++
++struct be_force_failover_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_FORCE_FAILOVER fwcmd;
++} ;
++
++
++struct be_rxf_filter_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_NTWK_RX_FILTER fwcmd;
++} ;
++
++struct be_eq_modify_delay_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct FWCMD_COMMON_MODIFY_EQ_DELAY fwcmd;
++} ;
++
++/*
++ * The generic context is the largest size that would be required.
++ * It is the software context plus an entire WRB.
++ */
++struct be_generic_q_ctxt {
++      struct be_queue_driver_context context;
++      struct be_mcc_wrb_header wrb_header;
++      struct MCC_WRB_PAYLOAD_AMAP payload;
++} ;
++
++/*
++ * Types for the BE_QUEUE_CONTEXT object.
++ */
++#define BE_QUEUE_INVALID      (0)
++#define BE_QUEUE_LINK_STATUS  (0xA006)
++#define BE_QUEUE_ETH_STATS    (0xA007)
++#define BE_QUEUE_TPM_STATS    (0xA008)
++#define BE_QUEUE_TCP_STATS    (0xA009)
++#define BE_QUEUE_MULTICAST    (0xA00A)
++#define BE_QUEUE_VLAN         (0xA00B)
++#define BE_QUEUE_RSS          (0xA00C)
++#define BE_QUEUE_FORCE_FAILOVER       (0xA00D)
++#define BE_QUEUE_PROMISCUOUS  (0xA00E)
++#define BE_QUEUE_WAKE_ON_LAN  (0xA00F)
++#define BE_QUEUE_NOP          (0xA010)
++
++/* --- BE_FUNCTION_ENUM --- */
++#define BE_FUNCTION_TYPE_ISCSI          (0)
++#define BE_FUNCTION_TYPE_NETWORK        (1)
++#define BE_FUNCTION_TYPE_ARM            (2)
++
++/* --- BE_ETH_TX_RING_TYPE_ENUM --- */
++#define BE_ETH_TX_RING_TYPE_FORWARDING  (1)   /* Ether ring for forwarding */
++#define BE_ETH_TX_RING_TYPE_STANDARD    (2)   /* Ether ring for sending */
++                                              /* network packets. */
++#define BE_ETH_TX_RING_TYPE_BOUND       (3)   /* Ethernet ring for sending */
++                                              /* network packets, bound */
++                                              /* to a physical port. */
++/*
++ * ----------------------------------------------------------------------
++ *   API MACROS
++ * ----------------------------------------------------------------------
++ */
++#define BE_FWCMD_NAME(_short_name_)     struct FWCMD_##_short_name_
++#define BE_OPCODE_NAME(_short_name_)    OPCODE_##_short_name_
++#define BE_SUBSYSTEM_NAME(_short_name_) SUBSYSTEM_##_short_name_
++
++
++#define BE_PREPARE_EMBEDDED_FWCMD(_pfob_, _wrb_, _short_name_)        \
++      ((BE_FWCMD_NAME(_short_name_) *)                                \
++      be_function_prepare_embedded_fwcmd(_pfob_, _wrb_,       \
++              sizeof(BE_FWCMD_NAME(_short_name_)),            \
++              FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
++              FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
++              BE_OPCODE_NAME(_short_name_),                           \
++              BE_SUBSYSTEM_NAME(_short_name_)));
++
++#define BE_PREPARE_NONEMBEDDED_FWCMD(_pfob_, _wrb_, _iva_, _ipa_, _short_name_)\
++      ((BE_FWCMD_NAME(_short_name_) *)                                \
++      be_function_prepare_nonembedded_fwcmd(_pfob_, _wrb_, (_iva_), (_ipa_), \
++              sizeof(BE_FWCMD_NAME(_short_name_)),            \
++              FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
++              FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
++              BE_OPCODE_NAME(_short_name_),                           \
++              BE_SUBSYSTEM_NAME(_short_name_)));
++
++int be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
++      u8 __iomem *pci_va, u32 function_type, struct ring_desc *mailbox_rd,
++        struct be_function_object *pfob);
++
++int be_function_object_destroy(struct be_function_object *pfob);
++int be_function_cleanup(struct be_function_object *pfob);
++
++
++int be_function_get_fw_version(struct be_function_object *pfob,
++      struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fw_version,
++      mcc_wrb_cqe_callback cb, void *cb_context);
++
++
++int be_eq_modify_delay(struct be_function_object *pfob,
++                 u32 num_eq, struct be_eq_object **eq_array,
++                 u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
++                 void *cb_context,
++                 struct be_eq_modify_delay_q_ctxt *q_ctxt);
++
++
++
++int be_eq_create(struct be_function_object *pfob,
++           struct ring_desc *rd, u32 eqe_size, u32 num_entries,
++           u32 watermark, u32 timer_delay, struct be_eq_object *eq_object);
++
++int be_eq_destroy(struct be_eq_object *eq);
++
++int be_cq_create(struct be_function_object *pfob,
++      struct ring_desc *rd, u32 length,
++      bool solicited_eventable, bool no_delay,
++      u32 wm_thresh, struct be_eq_object *eq_object,
++      struct be_cq_object *cq_object);
++
++int be_cq_destroy(struct be_cq_object *cq);
++
++int be_mcc_ring_create(struct be_function_object *pfob,
++                 struct ring_desc *rd, u32 length,
++                 struct be_mcc_wrb_context *context_array,
++                 u32 num_context_entries,
++                 struct be_cq_object *cq, struct be_mcc_object *mcc);
++int be_mcc_ring_destroy(struct be_mcc_object *mcc_object);
++
++int be_mcc_process_cq(struct be_mcc_object *mcc_object, bool rearm);
++
++int be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
++              mcc_async_event_callback cb, void *cb_context);
++
++int be_pci_soft_reset(struct be_function_object *pfob);
++
++
++int be_drive_POST(struct be_function_object *pfob);
++
++
++int be_eth_sq_create(struct be_function_object *pfob,
++              struct ring_desc *rd, u32 length_in_bytes,
++              u32 type, u32 ulp, struct be_cq_object *cq_object,
++              struct be_ethsq_object *eth_sq);
++
++struct be_eth_sq_parameters {
++      u32 port;
++      u32 rsvd0[2];
++} ;
++
++int be_eth_sq_create_ex(struct be_function_object *pfob,
++                  struct ring_desc *rd, u32 length_in_bytes,
++                  u32 type, u32 ulp, struct be_cq_object *cq_object,
++                  struct be_eth_sq_parameters *ex_parameters,
++                  struct be_ethsq_object *eth_sq);
++int be_eth_sq_destroy(struct be_ethsq_object *eth_sq);
++
++int be_eth_set_flow_control(struct be_function_object *pfob,
++                      bool txfc_enable, bool rxfc_enable);
++
++int be_eth_get_flow_control(struct be_function_object *pfob,
++                      bool *txfc_enable, bool *rxfc_enable);
++int be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps);
++
++int be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps);
++
++int be_eth_set_frame_size(struct be_function_object *pfob,
++                    u32 *tx_frame_size, u32 *rx_frame_size);
++
++int be_eth_rq_create(struct be_function_object *pfob,
++               struct ring_desc *rd, struct be_cq_object *cq_object,
++               struct be_cq_object *bcmc_cq_object,
++               struct be_ethrq_object *eth_rq);
++
++int be_eth_rq_destroy(struct be_ethrq_object *eth_rq);
++
++int be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
++              mcc_wrb_cqe_callback cb, void *cb_context);
++int be_eth_rq_set_frag_size(struct be_function_object *pfob,
++              u32 new_frag_size_bytes, u32 *actual_frag_size_bytes);
++int be_eth_rq_get_frag_size(struct be_function_object *pfob,
++                                              u32 *frag_size_bytes);
++
++void *be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
++                 struct MCC_WRB_AMAP *wrb,
++                 u32 payload_length, u32 request_length,
++                 u32 response_length, u32 opcode, u32 subsystem);
++void *be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
++      struct MCC_WRB_AMAP *wrb, void *fwcmd_header_va, u64 fwcmd_header_pa,
++      u32 payload_length, u32 request_length, u32 response_length,
++      u32 opcode, u32 subsystem);
++
++
++struct MCC_WRB_AMAP *
++be_function_peek_mcc_wrb(struct be_function_object *pfob);
++
++int be_rxf_mac_address_read_write(struct be_function_object *pfob,
++            bool port1, bool mac1, bool mgmt,
++            bool write, bool permanent, u8 *mac_address,
++            mcc_wrb_cqe_callback cb,
++            void *cb_context);
++
++int be_rxf_multicast_config(struct be_function_object *pfob,
++                      bool promiscuous, u32 num, u8 *mac_table,
++                      mcc_wrb_cqe_callback cb,
++                      void *cb_context,
++                      struct be_multicast_q_ctxt *q_ctxt);
++
++int be_rxf_vlan_config(struct be_function_object *pfob,
++         bool promiscuous, u32 num, u16 *vlan_tag_array,
++         mcc_wrb_cqe_callback cb, void *cb_context,
++         struct be_vlan_q_ctxt *q_ctxt);
++
++
++int be_rxf_link_status(struct be_function_object *pfob,
++                 struct BE_LINK_STATUS *link_status,
++                 mcc_wrb_cqe_callback cb,
++                 void *cb_context,
++                 struct be_link_status_q_ctxt *q_ctxt);
++
++
++int be_rxf_query_eth_statistics(struct be_function_object *pfob,
++              struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
++              u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
++              void *cb_context,
++              struct be_nonembedded_q_ctxt *q_ctxt);
++
++int be_rxf_promiscuous(struct be_function_object *pfob,
++                 bool enable_port0, bool enable_port1,
++                 mcc_wrb_cqe_callback cb, void *cb_context,
++                 struct be_promiscuous_q_ctxt *q_ctxt);
++
++
++int be_rxf_filter_config(struct be_function_object *pfob,
++                   struct NTWK_RX_FILTER_SETTINGS *settings,
++                   mcc_wrb_cqe_callback cb,
++                   void *cb_context,
++                   struct be_rxf_filter_q_ctxt *q_ctxt);
++
++/*
++ * ------------------------------------------------------
++ *  internal functions used by hwlib
++ * ------------------------------------------------------
++ */
++
++
++int be_function_ring_destroy(struct be_function_object *pfob,
++                     u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
++                     void *cb_context,
++                     mcc_wrb_cqe_callback internal_cb,
++                     void *internal_callback_context);
++
++int be_function_post_mcc_wrb(struct be_function_object *pfob,
++              struct MCC_WRB_AMAP *wrb,
++              struct be_generic_q_ctxt *q_ctxt,
++              mcc_wrb_cqe_callback cb, void *cb_context,
++              mcc_wrb_cqe_callback internal_cb,
++              void *internal_cb_context, void *optional_fwcmd_va,
++              struct be_mcc_wrb_response_copy *response_copy);
++
++int be_function_queue_mcc_wrb(struct be_function_object *pfob,
++                        struct be_generic_q_ctxt *q_ctxt);
++
++/*
++ * ------------------------------------------------------
++ *  MCC QUEUE
++ * ------------------------------------------------------
++ */
++
++int be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *rd);
++
++
++struct MCC_WRB_AMAP *
++_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue);
++
++struct be_mcc_wrb_context *
++_be_mcc_allocate_wrb_context(struct be_function_object *pfob);
++
++void _be_mcc_free_wrb_context(struct be_function_object *pfob,
++                       struct be_mcc_wrb_context *context);
++
++int _be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
++       struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
++
++int _be_mpu_post_wrb_ring(struct be_mcc_object *mcc,
++      struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
++
++void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc);
++
++
++/*
++ * ------------------------------------------------------
++ *  Ring Sizes
++ * ------------------------------------------------------
++ */
++static inline u32 be_ring_encoding_to_length(u32 encoding, u32 object_size)
++{
++
++      ASSERT(encoding != 1);  /* 1 is rsvd */
++      ASSERT(encoding < 16);
++      ASSERT(object_size > 0);
++
++      if (encoding == 0)      /* 32k deep */
++              encoding = 16;
++
++      return (1 << (encoding - 1)) * object_size;
++}
++
++static inline
++u32 be_ring_length_to_encoding(u32 length_in_bytes, u32 object_size)
++{
++
++      u32 count, encoding;
++
++      ASSERT(object_size > 0);
++      ASSERT(length_in_bytes % object_size == 0);
++
++      count = length_in_bytes / object_size;
++
++      ASSERT(count > 1);
++      ASSERT(count <= 32 * 1024);
++      ASSERT(length_in_bytes <= 8 * PAGE_SIZE); /* max ring size in UT */
++
++      encoding = __ilog2_u32(count) + 1;
++
++      if (encoding == 16)
++              encoding = 0;   /* 32k deep */
++
++      return encoding;
++}
++
++void be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list,
++                                              u32 max_num);
++#endif /* __hwlib_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/benet/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/benet/Kconfig    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/Kconfig        2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,7 @@
++config BENET
++      tristate "ServerEngines 10Gb NIC - BladeEngine"
++      depends on PCI && INET
++      select INET_LRO
++      help
++        This driver implements the NIC functionality for ServerEngines
++        10Gb network adapter BladeEngine (EC 3210).
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/MAINTAINERS linux-2.6.29-rc3.owrt/drivers/staging/benet/MAINTAINERS
+--- linux-2.6.29.owrt/drivers/staging/benet/MAINTAINERS        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/MAINTAINERS    2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,6 @@
++SERVER ENGINES 10Gbe NIC - BLADE-ENGINE
++P:    Subbu Seetharaman
++M:    subbus@serverengines.com
++L:    netdev@vger.kernel.org
++W:    http://www.serverengines.com
++S:    Supported
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/Makefile linux-2.6.29-rc3.owrt/drivers/staging/benet/Makefile
+--- linux-2.6.29.owrt/drivers/staging/benet/Makefile   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/Makefile       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,14 @@
++#
++# Makefile to build the network driver for ServerEngine's BladeEngine
++#
++obj-$(CONFIG_BENET) += benet.o
++
++benet-y :=  be_init.o \
++                      be_int.o \
++                      be_netif.o \
++                      be_ethtool.o \
++                      funcobj.o \
++                      cq.o \
++                      eq.o \
++                      mpu.o \
++                      eth.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/mpu.c linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu.c
+--- linux-2.6.29.owrt/drivers/staging/benet/mpu.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu.c  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,1364 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++#include <linux/delay.h>
++#include "hwlib.h"
++#include "bestatus.h"
++
++static
++inline void mp_ring_create(struct mp_ring *ring, u32 num, u32 size, void *va)
++{
++      ASSERT(ring);
++      memset(ring, 0, sizeof(struct mp_ring));
++      ring->num = num;
++      ring->pages = DIV_ROUND_UP(num * size, PAGE_SIZE);
++      ring->itemSize = size;
++      ring->va = va;
++}
++
++/*
++ * -----------------------------------------------------------------------
++ * Interface for 2 index rings. i.e. consumer/producer rings
++ * --------------------------------------------------------------------------
++ */
++
++/* Returns number items pending on ring. */
++static inline u32 mp_ring_num_pending(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      if (ring->num == 0)
++              return 0;
++      return be_subc(ring->pidx, ring->cidx, ring->num);
++}
++
++/* Returns number items free on ring. */
++static inline u32 mp_ring_num_empty(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      return ring->num - 1 - mp_ring_num_pending(ring);
++}
++
++/* Consume 1 item */
++static inline void mp_ring_consume(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      ASSERT(ring->pidx != ring->cidx);
++
++      ring->cidx = be_addc(ring->cidx, 1, ring->num);
++}
++
++/* Produce 1 item */
++static inline void mp_ring_produce(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      ring->pidx = be_addc(ring->pidx, 1, ring->num);
++}
++
++/* Consume count items */
++static inline void mp_ring_consume_multiple(struct mp_ring *ring, u32 count)
++{
++      ASSERT(ring);
++      ASSERT(mp_ring_num_pending(ring) >= count);
++      ring->cidx = be_addc(ring->cidx, count, ring->num);
++}
++
++static inline void *mp_ring_item(struct mp_ring *ring, u32 index)
++{
++      ASSERT(ring);
++      ASSERT(index < ring->num);
++      ASSERT(ring->itemSize > 0);
++      return (u8 *) ring->va + index * ring->itemSize;
++}
++
++/* Ptr to produce item */
++static inline void *mp_ring_producer_ptr(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      return mp_ring_item(ring, ring->pidx);
++}
++
++/*
++ * Returns a pointer to the current location in the ring.
++ * This is used for rings with 1 index.
++ */
++static inline void *mp_ring_current(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      ASSERT(ring->pidx == 0);        /* not used */
++
++      return mp_ring_item(ring, ring->cidx);
++}
++
++/*
++ * Increment index for rings with only 1 index.
++ * This is used for rings with 1 index.
++ */
++static inline void *mp_ring_next(struct mp_ring *ring)
++{
++      ASSERT(ring);
++      ASSERT(ring->num > 0);
++      ASSERT(ring->pidx == 0);        /* not used */
++
++      ring->cidx = be_addc(ring->cidx, 1, ring->num);
++      return mp_ring_current(ring);
++}
++
++/*
++    This routine waits for a previously posted mailbox WRB to be completed.
++    Specifically it waits for the mailbox to say that it's ready to accept
++    more data by setting the LSB of the mailbox pd register to 1.
++
++    pcontroller      - The function object to post this data to
++
++    IRQL < DISPATCH_LEVEL
++*/
++static void be_mcc_mailbox_wait(struct be_function_object *pfob)
++{
++      struct MPU_MAILBOX_DB_AMAP mailbox_db;
++      u32 i = 0;
++      u32 ready;
++
++      if (pfob->emulate) {
++              /* No waiting for mailbox in emulated mode. */
++              return;
++      }
++
++      mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
++      ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
++
++      while (ready == false) {
++              if ((++i & 0x3FFFF) == 0) {
++                      TRACE(DL_WARN, "Waiting for mailbox ready - %dk polls",
++                                                              i / 1000);
++              }
++              udelay(1);
++              mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
++              ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
++      }
++}
++
++/*
++    This routine tells the MCC mailbox that there is data to processed
++    in the mailbox. It does this by setting the physical address for the
++    mailbox location and clearing the LSB.  This routine returns immediately
++    and does not wait for the WRB to be processed.
++
++    pcontroller      - The function object to post this data to
++
++    IRQL < DISPATCH_LEVEL
++
++*/
++static void be_mcc_mailbox_notify(struct be_function_object *pfob)
++{
++      struct MPU_MAILBOX_DB_AMAP mailbox_db;
++      u32 pa;
++
++      ASSERT(pfob->mailbox.pa);
++      ASSERT(pfob->mailbox.va);
++
++      /* If emulated, do not ring the mailbox */
++      if (pfob->emulate) {
++              TRACE(DL_WARN, "MPU disabled. Skipping mailbox notify.");
++              return;
++      }
++
++      /* form the higher bits in the address */
++      mailbox_db.dw[0] = 0;   /* init */
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 1);
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
++
++      /* bits 34 to 63 */
++      pa = (u32) (pfob->mailbox.pa >> 34);
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
++
++      /* Wait for the MPU to be ready */
++      be_mcc_mailbox_wait(pfob);
++
++      /* Ring doorbell 1st time */
++      PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
++
++      /* Wait for 1st write to be acknowledged. */
++      be_mcc_mailbox_wait(pfob);
++
++      /* lower bits 30 bits from 4th bit (bits 4 to 33)*/
++      pa = (u32) (pfob->mailbox.pa >> 4) & 0x3FFFFFFF;
++
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 0);
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
++      AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
++
++      /* Ring doorbell 2nd time */
++      PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
++}
++
++/*
++    This routine tells the MCC mailbox that there is data to processed
++    in the mailbox. It does this by setting the physical address for the
++    mailbox location and clearing the LSB.  This routine spins until the
++    MPU writes a 1 into the LSB indicating that the data has been received
++    and is ready to be processed.
++
++    pcontroller      - The function object to post this data to
++
++    IRQL < DISPATCH_LEVEL
++*/
++static void
++be_mcc_mailbox_notify_and_wait(struct be_function_object *pfob)
++{
++      /*
++       * Notify it
++       */
++      be_mcc_mailbox_notify(pfob);
++      /*
++       * Now wait for completion of WRB
++       */
++      be_mcc_mailbox_wait(pfob);
++}
++
++void
++be_mcc_process_cqe(struct be_function_object *pfob,
++                              struct MCC_CQ_ENTRY_AMAP *cqe)
++{
++      struct be_mcc_wrb_context *wrb_context = NULL;
++      u32 offset, status;
++      u8 *p;
++
++      ASSERT(cqe);
++      /*
++       * A command completed.  Commands complete out-of-order.
++       * Determine which command completed from the TAG.
++       */
++      offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
++      p = (u8 *) cqe + offset;
++      wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
++      ASSERT(wrb_context);
++
++      /*
++       * Perform a response copy if requested.
++       * Only copy data if the FWCMD is successful.
++       */
++      status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, cqe);
++      if (status == MGMT_STATUS_SUCCESS && wrb_context->copy.length > 0) {
++              ASSERT(wrb_context->wrb);
++              ASSERT(wrb_context->copy.va);
++              p = (u8 *)wrb_context->wrb +
++                              offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
++              memcpy(wrb_context->copy.va,
++                        (u8 *)p + wrb_context->copy.fwcmd_offset,
++                        wrb_context->copy.length);
++      }
++
++      if (status)
++              status = BE_NOT_OK;
++      /* internal callback */
++      if (wrb_context->internal_cb) {
++              wrb_context->internal_cb(wrb_context->internal_cb_context,
++                                              status, wrb_context->wrb);
++      }
++
++      /* callback */
++      if (wrb_context->cb) {
++              wrb_context->cb(wrb_context->cb_context,
++                                            status, wrb_context->wrb);
++      }
++      /* Free the context structure */
++      _be_mcc_free_wrb_context(pfob, wrb_context);
++}
++
++void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc)
++{
++      struct be_function_object *pfob = NULL;
++      int status = BE_PENDING;
++      struct be_generic_q_ctxt *q_ctxt;
++      struct MCC_WRB_AMAP *wrb;
++      struct MCC_WRB_AMAP *queue_wrb;
++      u32 length, payload_length, sge_count, embedded;
++      unsigned long irql;
++
++      BUILD_BUG_ON((sizeof(struct be_generic_q_ctxt) <
++                        sizeof(struct be_queue_driver_context) +
++                                      sizeof(struct MCC_WRB_AMAP)));
++      pfob = mcc->parent_function;
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      if (mcc->driving_backlog) {
++              spin_unlock_irqrestore(&pfob->post_lock, irql);
++              if (pfob->pend_queue_driving && pfob->mcc) {
++                      pfob->pend_queue_driving = 0;
++                      be_drive_mcc_wrb_queue(pfob->mcc);
++              }
++              return;
++      }
++      /* Acquire the flag to limit 1 thread to redrive posts. */
++      mcc->driving_backlog = 1;
++
++      while (!list_empty(&mcc->backlog)) {
++              wrb = _be_mpu_peek_ring_wrb(mcc, true); /* Driving the queue */
++              if (!wrb)
++                      break;  /* No space in the ring yet. */
++              /* Get the next queued entry to process. */
++              q_ctxt = list_first_entry(&mcc->backlog,
++                              struct be_generic_q_ctxt, context.list);
++              list_del(&q_ctxt->context.list);
++              pfob->mcc->backlog_length--;
++              /*
++               * Compute the required length of the WRB.
++               * Since the queue element may be smaller than
++               * the complete WRB, copy only the required number of bytes.
++               */
++              queue_wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
++              embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, queue_wrb);
++              if (embedded) {
++                      payload_length = AMAP_GET_BITS_PTR(MCC_WRB,
++                                              payload_length, queue_wrb);
++                      length = sizeof(struct be_mcc_wrb_header) +
++                                                              payload_length;
++              } else {
++                      sge_count = AMAP_GET_BITS_PTR(MCC_WRB, sge_count,
++                                                              queue_wrb);
++                      ASSERT(sge_count == 1); /* only 1 frag. */
++                      length = sizeof(struct be_mcc_wrb_header) +
++                          sge_count * sizeof(struct MCC_SGE_AMAP);
++              }
++
++              /*
++               * Truncate the length based on the size of the
++               * queue element.  Some elements that have output parameters
++               * can be smaller than the payload_length field would
++               * indicate.  We really only need to copy the request
++               * parameters, not the response.
++               */
++              length = min(length, (u32) (q_ctxt->context.bytes -
++                      offsetof(struct be_generic_q_ctxt, wrb_header)));
++
++              /* Copy the queue element WRB into the ring. */
++              memcpy(wrb, &q_ctxt->wrb_header, length);
++
++              /* Post the wrb.  This should not fail assuming we have
++               * enough context structs. */
++              status = be_function_post_mcc_wrb(pfob, wrb, NULL,
++                         q_ctxt->context.cb, q_ctxt->context.cb_context,
++                         q_ctxt->context.internal_cb,
++                         q_ctxt->context.internal_cb_context,
++                         q_ctxt->context.optional_fwcmd_va,
++                         &q_ctxt->context.copy);
++
++              if (status == BE_SUCCESS) {
++                      /*
++                       * Synchronous completion. Since it was queued,
++                       * we will invoke the callback.
++                       * To the user, this is an asynchronous request.
++                       */
++                      spin_unlock_irqrestore(&pfob->post_lock, irql);
++                      if (pfob->pend_queue_driving && pfob->mcc) {
++                              pfob->pend_queue_driving = 0;
++                              be_drive_mcc_wrb_queue(pfob->mcc);
++                      }
++
++                      ASSERT(q_ctxt->context.cb);
++
++                      q_ctxt->context.cb(
++                              q_ctxt->context.cb_context,
++                                              BE_SUCCESS, NULL);
++
++                      spin_lock_irqsave(&pfob->post_lock, irql);
++
++              } else if (status != BE_PENDING) {
++                      /*
++                       * Another resource failed.  Should never happen
++                       * if we have sufficient MCC_WRB_CONTEXT structs.
++                       * Return to head of the queue.
++                       */
++                      TRACE(DL_WARN, "Failed to post a queued WRB. 0x%x",
++                            status);
++                      list_add(&q_ctxt->context.list, &mcc->backlog);
++                      pfob->mcc->backlog_length++;
++                      break;
++              }
++      }
++
++      /* Free the flag to limit 1 thread to redrive posts. */
++      mcc->driving_backlog = 0;
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++}
++
++/* This function asserts that the WRB was consumed in order. */
++#ifdef BE_DEBUG
++u32 be_mcc_wrb_consumed_in_order(struct be_mcc_object *mcc,
++                                      struct MCC_CQ_ENTRY_AMAP *cqe)
++{
++      struct be_mcc_wrb_context *wrb_context = NULL;
++      u32 wrb_index;
++      u32 wrb_consumed_in_order;
++      u32 offset;
++      u8 *p;
++
++      ASSERT(cqe);
++      /*
++       * A command completed.  Commands complete out-of-order.
++       * Determine which command completed from the TAG.
++       */
++      offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
++      p = (u8 *) cqe + offset;
++      wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
++
++      ASSERT(wrb_context);
++
++      wrb_index = (u32) (((u64)(size_t)wrb_context->ring_wrb -
++              (u64)(size_t)mcc->sq.ring.va) / sizeof(struct MCC_WRB_AMAP));
++
++      ASSERT(wrb_index < mcc->sq.ring.num);
++
++      wrb_consumed_in_order = (u32) (wrb_index == mcc->consumed_index);
++      mcc->consumed_index = be_addc(mcc->consumed_index, 1, mcc->sq.ring.num);
++      return wrb_consumed_in_order;
++}
++#endif
++
++int be_mcc_process_cq(struct be_mcc_object *mcc, bool rearm)
++{
++      struct be_function_object *pfob = NULL;
++      struct MCC_CQ_ENTRY_AMAP *cqe;
++      struct CQ_DB_AMAP db;
++      struct mp_ring *cq_ring = &mcc->cq.ring;
++      struct mp_ring *mp_ring = &mcc->sq.ring;
++      u32 num_processed = 0;
++      u32 consumed = 0, valid, completed, cqe_consumed, async_event;
++
++      pfob = mcc->parent_function;
++
++      spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
++
++      /*
++       * Verify that only one thread is processing the CQ at once.
++       * We cannot hold the lock while processing the CQ due to
++       * the callbacks into the OS.  Therefore, this flag is used
++       * to control it.  If any of the threads want to
++       * rearm the CQ, we need to honor that.
++       */
++      if (mcc->processing != 0) {
++              mcc->rearm = mcc->rearm || rearm;
++              goto Error;
++      } else {
++              mcc->processing = 1;    /* lock processing for this thread. */
++              mcc->rearm = rearm;     /* set our rearm setting */
++      }
++
++      spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
++
++      cqe = mp_ring_current(cq_ring);
++      valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
++      while (valid) {
++
++              if (num_processed >= 8) {
++                      /* coalesce doorbells, but free space in cq
++                       * ring while processing. */
++                      db.dw[0] = 0;   /* clear */
++                      AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
++                      AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, false);
++                      AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
++                      AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db,
++                                                      num_processed);
++                      num_processed = 0;
++
++                      PD_WRITE(pfob, cq_db, db.dw[0]);
++              }
++
++              async_event = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, async_event, cqe);
++              if (async_event) {
++                      /* This is an asynchronous event. */
++                      struct ASYNC_EVENT_TRAILER_AMAP *async_trailer =
++                          (struct ASYNC_EVENT_TRAILER_AMAP *)
++                          ((u8 *) cqe + sizeof(struct MCC_CQ_ENTRY_AMAP) -
++                           sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
++                      u32 event_code;
++                      async_event = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
++                                              async_event, async_trailer);
++                      ASSERT(async_event == 1);
++
++
++                      valid = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
++                                              valid, async_trailer);
++                      ASSERT(valid == 1);
++
++                      /* Call the async event handler if it is installed. */
++                      if (mcc->async_cb) {
++                              event_code =
++                                      AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
++                                              event_code, async_trailer);
++                              mcc->async_cb(mcc->async_context,
++                                          (u32) event_code, (void *) cqe);
++                      }
++
++              } else {
++                      /* This is a completion entry. */
++
++                      /* No vm forwarding in this driver. */
++
++                      cqe_consumed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
++                                              consumed, cqe);
++                      if (cqe_consumed) {
++                              /*
++                               * A command on the MCC ring was consumed.
++                               * Update the consumer index.
++                               * These occur in order.
++                               */
++                              ASSERT(be_mcc_wrb_consumed_in_order(mcc, cqe));
++                              consumed++;
++                      }
++
++                      completed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
++                                      completed, cqe);
++                      if (completed) {
++                              /* A command completed.  Use tag to
++                               * determine which command.  */
++                              be_mcc_process_cqe(pfob, cqe);
++                      }
++              }
++
++              /* Reset the CQE */
++              AMAP_SET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe, false);
++              num_processed++;
++
++              /* Update our tracking for the CQ ring. */
++              cqe = mp_ring_next(cq_ring);
++              valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
++      }
++
++      TRACE(DL_INFO, "num_processed:0x%x, and consumed:0x%x",
++            num_processed, consumed);
++      /*
++       * Grab the CQ lock to synchronize the "rearm" setting for
++       * the doorbell, and for clearing the "processing" flag.
++       */
++      spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
++
++      /*
++       * Rearm the cq.  This is done based on the global mcc->rearm
++       * flag which combines the rearm parameter from the current
++       * call to process_cq and any other threads
++       * that tried to process the CQ while this one was active.
++       * This handles the situation where a sync. fwcmd was processing
++       * the CQ while the interrupt/dpc tries to process it.
++       * The sync process gets to continue -- but it is now
++       * responsible for the rearming.
++       */
++      if (num_processed > 0 || mcc->rearm == true) {
++              db.dw[0] = 0;   /* clear */
++              AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
++              AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, mcc->rearm);
++              AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
++              AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db, num_processed);
++
++              PD_WRITE(pfob, cq_db, db.dw[0]);
++      }
++      /*
++       * Update the consumer index after ringing the CQ doorbell.
++       * We don't want another thread to post more WRBs before we
++       * have CQ space available.
++       */
++      mp_ring_consume_multiple(mp_ring, consumed);
++
++      /* Clear the processing flag. */
++      mcc->processing = 0;
++
++Error:
++      spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
++      /*
++       * Use the local variable to detect if the current thread
++       * holds the WRB post lock.  If rearm is false, this is
++       * either a synchronous command, or the upper layer driver is polling
++       * from a thread.  We do not drive the queue from that
++       * context since the driver may hold the
++       * wrb post lock already.
++       */
++      if (rearm)
++              be_drive_mcc_wrb_queue(mcc);
++      else
++              pfob->pend_queue_driving = 1;
++
++      return BE_SUCCESS;
++}
++
++/*
++ *============================================================================
++ *                  P U B L I C  R O U T I N E S
++ *============================================================================
++ */
++
++/*
++    This routine creates an MCC object.  This object contains an MCC send queue
++    and a CQ private to the MCC.
++
++    pcontroller      - Handle to a function object
++
++    EqObject            - EQ object that will be used to dispatch this MCC
++
++    ppMccObject         - Pointer to an internal Mcc Object returned.
++
++    Returns BE_SUCCESS if successfull,, otherwise a useful error code
++      is returned.
++
++    IRQL < DISPATCH_LEVEL
++
++*/
++int
++be_mcc_ring_create(struct be_function_object *pfob,
++                 struct ring_desc *rd, u32 length,
++                 struct be_mcc_wrb_context *context_array,
++                 u32 num_context_entries,
++                 struct be_cq_object *cq, struct be_mcc_object *mcc)
++{
++      int status = 0;
++
++      struct FWCMD_COMMON_MCC_CREATE *fwcmd = NULL;
++      struct MCC_WRB_AMAP *wrb = NULL;
++      u32 num_entries_encoded, n, i;
++      void *va = NULL;
++      unsigned long irql;
++
++      if (length < sizeof(struct MCC_WRB_AMAP) * 2) {
++              TRACE(DL_ERR, "Invalid MCC ring length:%d", length);
++              return BE_NOT_OK;
++      }
++      /*
++       * Reduce the actual ring size to be less than the number
++       * of context entries.  This ensures that we run out of
++       * ring WRBs first so the queuing works correctly.  We never
++       * queue based on context structs.
++       */
++      if (num_context_entries + 1 <
++                      length / sizeof(struct MCC_WRB_AMAP) - 1) {
++
++              u32 max_length =
++                  (num_context_entries + 2) * sizeof(struct MCC_WRB_AMAP);
++
++              if (is_power_of_2(max_length))
++                      length = __roundup_pow_of_two(max_length+1) / 2;
++              else
++                      length = __roundup_pow_of_two(max_length) / 2;
++
++              ASSERT(length <= max_length);
++
++              TRACE(DL_WARN,
++                      "MCC ring length reduced based on context entries."
++                      " length:%d wrbs:%d context_entries:%d", length,
++                      (int) (length / sizeof(struct MCC_WRB_AMAP)),
++                      num_context_entries);
++      }
++
++      spin_lock_irqsave(&pfob->post_lock, irql);
++
++      num_entries_encoded =
++          be_ring_length_to_encoding(length, sizeof(struct MCC_WRB_AMAP));
++
++      /* Init MCC object. */
++      memset(mcc, 0, sizeof(*mcc));
++      mcc->parent_function = pfob;
++      mcc->cq_object = cq;
++
++      INIT_LIST_HEAD(&mcc->backlog);
++
++      wrb = be_function_peek_mcc_wrb(pfob);
++      if (!wrb) {
++              ASSERT(wrb);
++              TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
++              status = BE_STATUS_NO_MCC_WRB;
++              goto error;
++      }
++      /* Prepares an embedded fwcmd, including request/response sizes. */
++      fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MCC_CREATE);
++
++      fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
++      /*
++       * Program MCC ring context
++       */
++      AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, pdid,
++                      &fwcmd->params.request.context, 0);
++      AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, invalid,
++                      &fwcmd->params.request.context, false);
++      AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, ring_size,
++                      &fwcmd->params.request.context, num_entries_encoded);
++
++      n = cq->cq_id;
++      AMAP_SET_BITS_PTR(MCC_RING_CONTEXT,
++                              cq_id, &fwcmd->params.request.context, n);
++      be_rd_to_pa_list(rd, fwcmd->params.request.pages,
++                              ARRAY_SIZE(fwcmd->params.request.pages));
++      /* Post the f/w command */
++      status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
++                                              NULL, NULL, fwcmd, NULL);
++      if (status != BE_SUCCESS) {
++              TRACE(DL_ERR, "MCC to create CQ failed.");
++              goto error;
++      }
++      /*
++       * Create a linked list of context structures
++       */
++      mcc->wrb_context.base = context_array;
++      mcc->wrb_context.num = num_context_entries;
++      INIT_LIST_HEAD(&mcc->wrb_context.list_head);
++      memset(context_array, 0,
++                  sizeof(struct be_mcc_wrb_context) * num_context_entries);
++      for (i = 0; i < mcc->wrb_context.num; i++) {
++              list_add_tail(&context_array[i].next,
++                                      &mcc->wrb_context.list_head);
++      }
++
++      /*
++       *
++       * Create an mcc_ring for tracking WRB hw ring
++       */
++      va = rd->va;
++      ASSERT(va);
++      mp_ring_create(&mcc->sq.ring, length / sizeof(struct MCC_WRB_AMAP),
++                              sizeof(struct MCC_WRB_AMAP), va);
++      mcc->sq.ring.id = fwcmd->params.response.id;
++      /*
++       * Init a mcc_ring for tracking the MCC CQ.
++       */
++      ASSERT(cq->va);
++      mp_ring_create(&mcc->cq.ring, cq->num_entries,
++                     sizeof(struct MCC_CQ_ENTRY_AMAP), cq->va);
++      mcc->cq.ring.id = cq->cq_id;
++
++      /* Force zeroing of CQ. */
++      memset(cq->va, 0, cq->num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP));
++
++      /* Initialize debug index. */
++      mcc->consumed_index = 0;
++
++      atomic_inc(&cq->ref_count);
++      pfob->mcc = mcc;
++
++      TRACE(DL_INFO, "MCC ring created. id:%d bytes:%d cq_id:%d cq_entries:%d"
++            " num_context:%d", mcc->sq.ring.id, length,
++            cq->cq_id, cq->num_entries, num_context_entries);
++
++error:
++      spin_unlock_irqrestore(&pfob->post_lock, irql);
++      if (pfob->pend_queue_driving && pfob->mcc) {
++              pfob->pend_queue_driving = 0;
++              be_drive_mcc_wrb_queue(pfob->mcc);
++      }
++      return status;
++}
++
++/*
++    This routine destroys an MCC send queue
++
++    MccObject         - Internal Mcc Object to be destroyed.
++
++    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
++
++    IRQL < DISPATCH_LEVEL
++
++    The caller of this routine must ensure that no other WRB may be posted
++    until this routine returns.
++
++*/
++int be_mcc_ring_destroy(struct be_mcc_object *mcc)
++{
++      int status = 0;
++      struct be_function_object *pfob = mcc->parent_function;
++
++
++      ASSERT(mcc->processing == 0);
++
++      /*
++       * Remove the ring from the function object.
++       * This transitions back to mailbox mode.
++       */
++      pfob->mcc = NULL;
++
++      /* Send fwcmd to destroy the queue.  (Using the mailbox.) */
++      status = be_function_ring_destroy(mcc->parent_function, mcc->sq.ring.id,
++                           FWCMD_RING_TYPE_MCC, NULL, NULL, NULL, NULL);
++      ASSERT(status == 0);
++
++      /* Release the SQ reference to the CQ */
++      atomic_dec(&mcc->cq_object->ref_count);
++
++      return status;
++}
++
++static void
++mcc_wrb_sync_cb(void *context, int staus, struct MCC_WRB_AMAP *wrb)
++{
++      struct be_mcc_wrb_context *wrb_context =
++                              (struct be_mcc_wrb_context *) context;
++      ASSERT(wrb_context);
++      *wrb_context->users_final_status = staus;
++}
++
++/*
++    This routine posts a command to the MCC send queue
++
++    mcc       - Internal Mcc Object to be destroyed.
++
++    wrb             - wrb to post.
++
++    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
++
++    IRQL < DISPATCH_LEVEL if CompletionCallback is not NULL
++    IRQL <=DISPATCH_LEVEL if CompletionCallback is  NULL
++
++    If this routine is called with CompletionCallback != NULL the
++    call is considered to be asynchronous and will return as soon
++    as the WRB is posted to the MCC with BE_PENDING.
++
++    If CompletionCallback is NULL, then this routine will not return until
++    a completion for this MCC command has been processed.
++    If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
++
++    This routine should only be called if the MPU has been boostraped past
++    mailbox mode.
++
++
++*/
++int
++_be_mpu_post_wrb_ring(struct be_mcc_object *mcc, struct MCC_WRB_AMAP *wrb,
++                              struct be_mcc_wrb_context *wrb_context)
++{
++
++      struct MCC_WRB_AMAP *ring_wrb = NULL;
++      int status = BE_PENDING;
++      int final_status = BE_PENDING;
++      mcc_wrb_cqe_callback cb = NULL;
++      struct MCC_DB_AMAP mcc_db;
++      u32 embedded;
++
++      ASSERT(mp_ring_num_empty(&mcc->sq.ring) > 0);
++      /*
++       * Input wrb is most likely the next wrb in the ring, since the client
++       * can peek at the address.
++       */
++      ring_wrb = mp_ring_producer_ptr(&mcc->sq.ring);
++      if (wrb != ring_wrb) {
++              /* If not equal, copy it into the ring. */
++              memcpy(ring_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
++      }
++#ifdef BE_DEBUG
++      wrb_context->ring_wrb = ring_wrb;
++#endif
++      embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, ring_wrb);
++      if (embedded) {
++              /* embedded commands will have the response within the WRB. */
++              wrb_context->wrb = ring_wrb;
++      } else {
++              /*
++               * non-embedded commands will not have the response
++               * within the WRB, and they may complete out-of-order.
++               * The WRB will not be valid to inspect
++               * during the completion.
++               */
++              wrb_context->wrb = NULL;
++      }
++      cb = wrb_context->cb;
++
++      if (cb == NULL) {
++              /* Assign our internal callback if this is a
++               * synchronous call. */
++              wrb_context->cb = mcc_wrb_sync_cb;
++              wrb_context->cb_context = wrb_context;
++              wrb_context->users_final_status = &final_status;
++      }
++      /* Increment producer index */
++
++      mcc_db.dw[0] = 0;               /* initialize */
++      AMAP_SET_BITS_PTR(MCC_DB, rid, &mcc_db, mcc->sq.ring.id);
++      AMAP_SET_BITS_PTR(MCC_DB, numPosted, &mcc_db, 1);
++
++      mp_ring_produce(&mcc->sq.ring);
++      PD_WRITE(mcc->parent_function, mpu_mcc_db, mcc_db.dw[0]);
++      TRACE(DL_INFO, "pidx: %x and cidx: %x.", mcc->sq.ring.pidx,
++            mcc->sq.ring.cidx);
++
++      if (cb == NULL) {
++              int polls = 0;  /* At >= 1 us per poll   */
++              /* Wait until this command completes, polling the CQ. */
++              do {
++                      TRACE(DL_INFO, "FWCMD submitted in the poll mode.");
++                      /* Do not rearm CQ in this context. */
++                      be_mcc_process_cq(mcc, false);
++
++                      if (final_status == BE_PENDING) {
++                              if ((++polls & 0x7FFFF) == 0) {
++                                      TRACE(DL_WARN,
++                                            "Warning : polling MCC CQ for %d"
++                                            "ms.", polls / 1000);
++                              }
++
++                              udelay(1);
++                      }
++
++                      /* final_status changed when the command completes */
++              } while (final_status == BE_PENDING);
++
++              status = final_status;
++      }
++
++      return status;
++}
++
++struct MCC_WRB_AMAP *
++_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue)
++{
++      /* If we have queued items, do not allow a post to bypass the queue. */
++      if (!driving_queue && !list_empty(&mcc->backlog))
++              return NULL;
++
++      if (mp_ring_num_empty(&mcc->sq.ring) <= 0)
++              return NULL;
++      return (struct MCC_WRB_AMAP *) mp_ring_producer_ptr(&mcc->sq.ring);
++}
++
++int
++be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *mailbox)
++{
++      ASSERT(mailbox);
++      pfob->mailbox.va = mailbox->va;
++      pfob->mailbox.pa =  cpu_to_le64(mailbox->pa);
++      pfob->mailbox.length = mailbox->length;
++
++      ASSERT(((u32)(size_t)pfob->mailbox.va & 0xf) == 0);
++      ASSERT(((u32)(size_t)pfob->mailbox.pa & 0xf) == 0);
++      /*
++       * Issue the WRB to set MPU endianness
++       */
++      {
++              u64 *endian_check = (u64 *) (pfob->mailbox.va +
++                              offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8);
++              *endian_check = 0xFF1234FFFF5678FFULL;
++      }
++
++      be_mcc_mailbox_notify_and_wait(pfob);
++
++      return BE_SUCCESS;
++}
++
++
++/*
++    This routine posts a command to the MCC mailbox.
++
++    FuncObj         - Function Object to post the WRB on behalf of.
++    wrb             - wrb to post.
++    CompletionCallback  - Address of a callback routine to invoke once the WRB
++                              is completed.
++    CompletionCallbackContext - Opaque context to be passed during the call to
++                              the CompletionCallback.
++    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
++
++    IRQL <=DISPATCH_LEVEL if CompletionCallback is  NULL
++
++    This routine will block until a completion for this MCC command has been
++    processed. If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
++
++    This routine should only be called if the MPU has not been boostraped past
++    mailbox mode.
++*/
++int
++_be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
++       struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context)
++{
++      struct MCC_MAILBOX_AMAP *mailbox = NULL;
++      struct MCC_WRB_AMAP *mb_wrb;
++      struct MCC_CQ_ENTRY_AMAP *mb_cq;
++      u32 offset, status;
++
++      ASSERT(pfob->mcc == NULL);
++      mailbox = pfob->mailbox.va;
++      ASSERT(mailbox);
++
++      offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
++      mb_wrb = (struct MCC_WRB_AMAP *) (u8 *)mailbox + offset;
++      if (mb_wrb != wrb) {
++              memset(mailbox, 0, sizeof(*mailbox));
++              memcpy(mb_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
++      }
++      /* The callback can inspect the final WRB to get output parameters. */
++      wrb_context->wrb = mb_wrb;
++
++      be_mcc_mailbox_notify_and_wait(pfob);
++
++      /* A command completed.  Use tag to determine which command. */
++      offset = offsetof(struct BE_MCC_MAILBOX_AMAP, cq)/8;
++      mb_cq = (struct MCC_CQ_ENTRY_AMAP *) ((u8 *)mailbox + offset);
++      be_mcc_process_cqe(pfob, mb_cq);
++
++      status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, mb_cq);
++      if (status)
++              status = BE_NOT_OK;
++      return status;
++}
++
++struct be_mcc_wrb_context *
++_be_mcc_allocate_wrb_context(struct be_function_object *pfob)
++{
++      struct be_mcc_wrb_context *context = NULL;
++      unsigned long irq;
++
++      spin_lock_irqsave(&pfob->mcc_context_lock, irq);
++
++      if (!pfob->mailbox.default_context_allocated) {
++              /* Use the single default context that we
++               * always have allocated. */
++              pfob->mailbox.default_context_allocated = true;
++              context = &pfob->mailbox.default_context;
++      } else if (pfob->mcc) {
++              /* Get a context from the free list. If any are available. */
++              if (!list_empty(&pfob->mcc->wrb_context.list_head)) {
++                      context = list_first_entry(
++                              &pfob->mcc->wrb_context.list_head,
++                                       struct be_mcc_wrb_context, next);
++              }
++      }
++
++      spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
++
++      return context;
++}
++
++void
++_be_mcc_free_wrb_context(struct be_function_object *pfob,
++                       struct be_mcc_wrb_context *context)
++{
++      unsigned long irq;
++
++      ASSERT(context);
++      /*
++       * Zero during free to try and catch any bugs where the context
++       * is accessed after a free.
++       */
++      memset(context, 0, sizeof(context));
++
++      spin_lock_irqsave(&pfob->mcc_context_lock, irq);
++
++      if (context == &pfob->mailbox.default_context) {
++              /* Free the default context. */
++              ASSERT(pfob->mailbox.default_context_allocated);
++              pfob->mailbox.default_context_allocated = false;
++      } else {
++              /* Add to free list. */
++              ASSERT(pfob->mcc);
++              list_add_tail(&context->next,
++                              &pfob->mcc->wrb_context.list_head);
++      }
++
++      spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
++}
++
++int
++be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
++              mcc_async_event_callback cb, void *cb_context)
++{
++      /* Lock against anyone trying to change the callback/context pointers
++       * while being used. */
++      spin_lock_irqsave(&mcc_object->parent_function->cq_lock,
++              mcc_object->parent_function->cq_irq);
++
++      /* Assign the async callback. */
++      mcc_object->async_context = cb_context;
++      mcc_object->async_cb = cb;
++
++      spin_unlock_irqrestore(&mcc_object->parent_function->cq_lock,
++                                      mcc_object->parent_function->cq_irq);
++
++      return BE_SUCCESS;
++}
++
++#define MPU_EP_CONTROL 0
++#define MPU_EP_SEMAPHORE 0xac
++
++/*
++ *-------------------------------------------------------------------
++ * Function: be_wait_for_POST_complete
++ *   Waits until the BladeEngine POST completes (either in error or success).
++ * pfob -
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *-------------------------------------------------------------------
++ */
++static int be_wait_for_POST_complete(struct be_function_object *pfob)
++{
++      struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
++      int s;
++      u32 post_error, post_stage;
++
++      const u32 us_per_loop = 1000;   /* 1000us */
++      const u32 print_frequency_loops = 1000000 / us_per_loop;
++      const u32 max_loops = 60 * print_frequency_loops;
++      u32 loops = 0;
++
++      /*
++       * Wait for arm fw indicating it is done or a fatal error happened.
++       * Note: POST can take some time to complete depending on configuration
++       * settings (consider ARM attempts to acquire an IP address
++       * over DHCP!!!).
++       *
++       */
++      do {
++              status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
++              post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
++                                              error, &status);
++              post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
++                                              stage, &status);
++              if (0 == (loops % print_frequency_loops)) {
++                      /* Print current status */
++                      TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
++                              status.dw[0], post_stage);
++              }
++              udelay(us_per_loop);
++      } while ((post_error != 1) &&
++               (post_stage != POST_STAGE_ARMFW_READY) &&
++               (++loops < max_loops));
++
++      if (post_error == 1) {
++              TRACE(DL_ERR, "POST error! Status = 0x%x (stage = 0x%x)",
++                    status.dw[0], post_stage);
++              s = BE_NOT_OK;
++      } else if (post_stage != POST_STAGE_ARMFW_READY) {
++              TRACE(DL_ERR, "POST time-out! Status = 0x%x (stage = 0x%x)",
++                    status.dw[0], post_stage);
++              s = BE_NOT_OK;
++      } else {
++              s = BE_SUCCESS;
++      }
++      return s;
++}
++
++/*
++ *-------------------------------------------------------------------
++ * Function: be_kickoff_and_wait_for_POST
++ *   Interacts with the BladeEngine management processor to initiate POST, and
++ *   subsequently waits until POST completes (either in error or success).
++ *   The caller must acquire the reset semaphore before initiating POST
++ *   to prevent multiple drivers interacting with the management processor.
++ *   Once POST is complete the caller must release the reset semaphore.
++ *   Callers who only want to wait for POST complete may call
++ *   be_wait_for_POST_complete.
++ * pfob -
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *-------------------------------------------------------------------
++ */
++static int
++be_kickoff_and_wait_for_POST(struct be_function_object *pfob)
++{
++      struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
++      int s;
++
++      const u32 us_per_loop = 1000;   /* 1000us */
++      const u32 print_frequency_loops = 1000000 / us_per_loop;
++      const u32 max_loops = 5 * print_frequency_loops;
++      u32 loops = 0;
++      u32 post_error, post_stage;
++
++      /* Wait for arm fw awaiting host ready or a fatal error happened. */
++      TRACE(DL_INFO, "Wait for BladeEngine ready to POST");
++      do {
++              status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
++              post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
++                                              error, &status);
++              post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
++                                              stage, &status);
++              if (0 == (loops % print_frequency_loops)) {
++                      /* Print current status */
++                      TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
++                            status.dw[0], post_stage);
++              }
++              udelay(us_per_loop);
++      } while ((post_error != 1) &&
++               (post_stage < POST_STAGE_AWAITING_HOST_RDY) &&
++               (++loops < max_loops));
++
++      if (post_error == 1) {
++              TRACE(DL_ERR, "Pre-POST error! Status = 0x%x (stage = 0x%x)",
++                    status.dw[0], post_stage);
++              s = BE_NOT_OK;
++      } else if (post_stage == POST_STAGE_AWAITING_HOST_RDY) {
++              iowrite32(POST_STAGE_HOST_RDY, pfob->csr_va + MPU_EP_SEMAPHORE);
++
++              /* Wait for POST to complete */
++              s = be_wait_for_POST_complete(pfob);
++      } else {
++              /*
++               * Either a timeout waiting for host ready signal or POST has
++               * moved ahead without requiring a host ready signal.
++               * Might as well give POST a chance to complete
++               * (or timeout again).
++               */
++              s = be_wait_for_POST_complete(pfob);
++      }
++      return s;
++}
++
++/*
++ *-------------------------------------------------------------------
++ * Function: be_pci_soft_reset
++ *   This function is called to issue a BladeEngine soft reset.
++ *   Callers should acquire the soft reset semaphore before calling this
++ *   function. Additionaly, callers should ensure they cannot be pre-empted
++ *   while the routine executes. Upon completion of this routine, callers
++ *   should release the reset semaphore. This routine implicitly waits
++ *   for BladeEngine POST to complete.
++ * pfob -
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *-------------------------------------------------------------------
++ */
++int be_pci_soft_reset(struct be_function_object *pfob)
++{
++      struct PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
++      struct PCICFG_ONLINE0_CSR_AMAP pciOnline0;
++      struct PCICFG_ONLINE1_CSR_AMAP pciOnline1;
++      struct EP_CONTROL_CSR_AMAP epControlCsr;
++      int status = BE_SUCCESS;
++      u32 i, soft_reset_bit;
++
++      TRACE(DL_NOTE, "PCI reset...");
++
++      /* Issue soft reset #1 to get BladeEngine into a known state. */
++      soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
++      AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
++      PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
++      /*
++       * wait til soft reset is deasserted - hardware
++       * deasserts after some time.
++       */
++      i = 0;
++      do {
++              udelay(50);
++              soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
++              soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
++                                      softreset, soft_reset.dw);
++      } while (soft_reset_bit  && (i++ < 1024));
++      if (soft_reset_bit != 0) {
++              TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
++              status = BE_NOT_OK;
++              goto Error_label;
++      }
++      /* Mask everything  */
++      PCICFG0_WRITE(pfob, ue_status_low_mask, 0xFFFFFFFF);
++      PCICFG0_WRITE(pfob, ue_status_hi_mask, 0xFFFFFFFF);
++      /*
++       * Set everything offline except MPU IRAM (it is offline with
++       * the soft-reset, but soft-reset does not reset the PCICFG registers!)
++       */
++      pciOnline0.dw[0] = 0;
++      pciOnline1.dw[0] = 0;
++      AMAP_SET_BITS_PTR(PCICFG_ONLINE1_CSR, mpu_iram_online,
++                              pciOnline1.dw, 1);
++      PCICFG0_WRITE(pfob, online0, pciOnline0.dw[0]);
++      PCICFG0_WRITE(pfob, online1, pciOnline1.dw[0]);
++
++      udelay(20000);
++
++      /* Issue soft reset #2. */
++      AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
++      PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
++      /*
++       * wait til soft reset is deasserted - hardware
++       * deasserts after some time.
++       */
++      i = 0;
++      do {
++              udelay(50);
++              soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
++              soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
++                                      softreset, soft_reset.dw);
++      } while (soft_reset_bit  && (i++ < 1024));
++      if (soft_reset_bit != 0) {
++              TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
++              status = BE_NOT_OK;
++              goto Error_label;
++      }
++
++
++      udelay(20000);
++
++      /* Take MPU out of reset. */
++
++      epControlCsr.dw[0] = ioread32(pfob->csr_va + MPU_EP_CONTROL);
++      AMAP_SET_BITS_PTR(EP_CONTROL_CSR, CPU_reset, &epControlCsr, 0);
++      iowrite32((u32)epControlCsr.dw[0], pfob->csr_va + MPU_EP_CONTROL);
++
++      /* Kickoff BE POST and wait for completion */
++      status = be_kickoff_and_wait_for_POST(pfob);
++
++Error_label:
++      return status;
++}
++
++
++/*
++ *-------------------------------------------------------------------
++ * Function: be_pci_reset_required
++ *   This private function is called to detect if a host entity is
++ *   required to issue a PCI soft reset and subsequently drive
++ *   BladeEngine POST. Scenarios where this is required:
++ *   1) BIOS-less configuration
++ *   2) Hot-swap/plug/power-on
++ * pfob -
++ * return   true if a reset is required, false otherwise
++ *-------------------------------------------------------------------
++ */
++static bool be_pci_reset_required(struct be_function_object *pfob)
++{
++      struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
++      bool do_reset = false;
++      u32 post_error, post_stage;
++
++      /*
++       * Read the POST status register
++       */
++      status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
++      post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, error,
++                                                              &status);
++      post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, stage,
++                                                              &status);
++      if (post_stage <= POST_STAGE_AWAITING_HOST_RDY) {
++              /*
++               * If BladeEngine is waiting for host ready indication,
++               * we want to do a PCI reset.
++               */
++              do_reset = true;
++      }
++
++      return do_reset;
++}
++
++/*
++ *-------------------------------------------------------------------
++ * Function: be_drive_POST
++ *   This function is called to drive BladeEngine POST. The
++ *   caller should ensure they cannot be pre-empted while this routine executes.
++ * pfob -
++ * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
++ *-------------------------------------------------------------------
++ */
++int be_drive_POST(struct be_function_object *pfob)
++{
++      int status;
++
++      if (false != be_pci_reset_required(pfob)) {
++              /* PCI reset is needed (implicitly starts and waits for POST) */
++              status = be_pci_soft_reset(pfob);
++      } else {
++              /* No PCI reset is needed, start POST */
++              status = be_kickoff_and_wait_for_POST(pfob);
++      }
++
++      return status;
++}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/mpu_context.h linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu_context.h
+--- linux-2.6.29.owrt/drivers/staging/benet/mpu_context.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu_context.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,46 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __mpu_context_amap_h__
++#define __mpu_context_amap_h__
++
++/*
++ * Management command and control ring context. The MPUs BTLR_CTRL1 CSR
++ * controls the writeback behavior of the producer and consumer index values.
++ */
++struct BE_MCC_RING_CONTEXT_AMAP {
++      u8 con_index[16];       /* DWORD 0 */
++      u8 ring_size[4];        /* DWORD 0 */
++      u8 cq_id[11];   /* DWORD 0 */
++      u8 rsvd0;               /* DWORD 0 */
++      u8 prod_index[16];      /* DWORD 1 */
++      u8 pdid[15];    /* DWORD 1 */
++      u8 invalid;             /* DWORD 1 */
++      u8 cmd_pending_current[7];      /* DWORD 2 */
++      u8 rsvd1[25];   /* DWORD 2 */
++      u8 hpi_port_cq_id[11];  /* DWORD 3 */
++      u8 rsvd2[5];    /* DWORD 3 */
++      u8 cmd_pending_max[7];  /* DWORD 3 */
++      u8 rsvd3[9];    /* DWORD 3 */
++} __packed;
++struct MCC_RING_CONTEXT_AMAP {
++      u32 dw[4];
++};
++
++#endif /* __mpu_context_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/mpu.h linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu.h
+--- linux-2.6.29.owrt/drivers/staging/benet/mpu.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/mpu.h  2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,74 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __mpu_amap_h__
++#define __mpu_amap_h__
++#include "ep.h"
++
++/* Provide control parameters for the Managment Processor Unit. */
++struct BE_MPU_CSRMAP_AMAP {
++      struct BE_EP_CSRMAP_AMAP ep;
++      u8 rsvd0[128];  /* DWORD 64 */
++      u8 rsvd1[32];   /* DWORD 68 */
++      u8 rsvd2[192];  /* DWORD 69 */
++      u8 rsvd3[192];  /* DWORD 75 */
++      u8 rsvd4[32];   /* DWORD 81 */
++      u8 rsvd5[32];   /* DWORD 82 */
++      u8 rsvd6[32];   /* DWORD 83 */
++      u8 rsvd7[32];   /* DWORD 84 */
++      u8 rsvd8[32];   /* DWORD 85 */
++      u8 rsvd9[32];   /* DWORD 86 */
++      u8 rsvd10[32];  /* DWORD 87 */
++      u8 rsvd11[32];  /* DWORD 88 */
++      u8 rsvd12[32];  /* DWORD 89 */
++      u8 rsvd13[32];  /* DWORD 90 */
++      u8 rsvd14[32];  /* DWORD 91 */
++      u8 rsvd15[32];  /* DWORD 92 */
++      u8 rsvd16[32];  /* DWORD 93 */
++      u8 rsvd17[32];  /* DWORD 94 */
++      u8 rsvd18[32];  /* DWORD 95 */
++      u8 rsvd19[32];  /* DWORD 96 */
++      u8 rsvd20[32];  /* DWORD 97 */
++      u8 rsvd21[32];  /* DWORD 98 */
++      u8 rsvd22[32];  /* DWORD 99 */
++      u8 rsvd23[32];  /* DWORD 100 */
++      u8 rsvd24[32];  /* DWORD 101 */
++      u8 rsvd25[32];  /* DWORD 102 */
++      u8 rsvd26[32];  /* DWORD 103 */
++      u8 rsvd27[32];  /* DWORD 104 */
++      u8 rsvd28[96];  /* DWORD 105 */
++      u8 rsvd29[32];  /* DWORD 108 */
++      u8 rsvd30[32];  /* DWORD 109 */
++      u8 rsvd31[32];  /* DWORD 110 */
++      u8 rsvd32[32];  /* DWORD 111 */
++      u8 rsvd33[32];  /* DWORD 112 */
++      u8 rsvd34[96];  /* DWORD 113 */
++      u8 rsvd35[32];  /* DWORD 116 */
++      u8 rsvd36[32];  /* DWORD 117 */
++      u8 rsvd37[32];  /* DWORD 118 */
++      u8 rsvd38[32];  /* DWORD 119 */
++      u8 rsvd39[32];  /* DWORD 120 */
++      u8 rsvd40[32];  /* DWORD 121 */
++      u8 rsvd41[134][32];     /* DWORD 122 */
++} __packed;
++struct MPU_CSRMAP_AMAP {
++      u32 dw[256];
++};
++
++#endif /* __mpu_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/pcicfg.h linux-2.6.29-rc3.owrt/drivers/staging/benet/pcicfg.h
+--- linux-2.6.29.owrt/drivers/staging/benet/pcicfg.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/pcicfg.h       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,825 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __pcicfg_amap_h__
++#define __pcicfg_amap_h__
++
++/* Vendor and Device ID Register. */
++struct BE_PCICFG_ID_CSR_AMAP {
++      u8 vendorid[16];        /* DWORD 0 */
++      u8 deviceid[16];        /* DWORD 0 */
++} __packed;
++struct PCICFG_ID_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* IO Bar Register. */
++struct BE_PCICFG_IOBAR_CSR_AMAP {
++      u8 iospace;             /* DWORD 0 */
++      u8 rsvd0[7];    /* DWORD 0 */
++      u8 iobar[24];   /* DWORD 0 */
++} __packed;
++struct PCICFG_IOBAR_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Memory BAR 0 Register. */
++struct BE_PCICFG_MEMBAR0_CSR_AMAP {
++      u8 memspace;    /* DWORD 0 */
++      u8 type[2];             /* DWORD 0 */
++      u8 pf;          /* DWORD 0 */
++      u8 rsvd0[10];   /* DWORD 0 */
++      u8 membar0[18]; /* DWORD 0 */
++} __packed;
++struct PCICFG_MEMBAR0_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Memory BAR 1 - Low Address Register. */
++struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP {
++      u8 memspace;    /* DWORD 0 */
++      u8 type[2];             /* DWORD 0 */
++      u8 pf;          /* DWORD 0 */
++      u8 rsvd0[13];   /* DWORD 0 */
++      u8 membar1lo[15];       /* DWORD 0 */
++} __packed;
++struct PCICFG_MEMBAR1_LO_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Memory BAR 1 - High Address Register. */
++struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP {
++      u8 membar1hi[32];       /* DWORD 0 */
++} __packed;
++struct PCICFG_MEMBAR1_HI_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Memory BAR 2 - Low Address Register. */
++struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP {
++      u8 memspace;    /* DWORD 0 */
++      u8 type[2];             /* DWORD 0 */
++      u8 pf;          /* DWORD 0 */
++      u8 rsvd0[17];   /* DWORD 0 */
++      u8 membar2lo[11];       /* DWORD 0 */
++} __packed;
++struct PCICFG_MEMBAR2_LO_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Memory BAR 2 - High Address Register. */
++struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP {
++      u8 membar2hi[32];       /* DWORD 0 */
++} __packed;
++struct PCICFG_MEMBAR2_HI_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Subsystem Vendor and ID (Function 0) Register. */
++struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
++      u8 subsys_vendor_id[16];        /* DWORD 0 */
++      u8 subsys_id[16];       /* DWORD 0 */
++} __packed;
++struct PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Subsystem Vendor and ID (Function 1) Register. */
++struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
++      u8 subsys_vendor_id[16];        /* DWORD 0 */
++      u8 subsys_id[16];       /* DWORD 0 */
++} __packed;
++struct PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Semaphore Register. */
++struct BE_PCICFG_SEMAPHORE_CSR_AMAP {
++      u8 locked;              /* DWORD 0 */
++      u8 rsvd0[31];   /* DWORD 0 */
++} __packed;
++struct PCICFG_SEMAPHORE_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Soft Reset Register. */
++struct BE_PCICFG_SOFT_RESET_CSR_AMAP {
++      u8 rsvd0[7];    /* DWORD 0 */
++      u8 softreset;   /* DWORD 0 */
++      u8 rsvd1[16];   /* DWORD 0 */
++      u8 nec_ll_rcvdetect_i[8];       /* DWORD 0 */
++} __packed;
++struct PCICFG_SOFT_RESET_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Unrecoverable Error Status (Low) Register. Each bit corresponds to
++ * an internal Unrecoverable Error.  These are set by hardware and may be
++ * cleared by writing a one to the respective bit(s) to be cleared.  Any
++ * bit being set that is also unmasked will result in Unrecoverable Error
++ * interrupt notification to the host CPU and/or Server Management chip
++ * and the transitioning of BladeEngine to an Offline state.
++ */
++struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP {
++      u8 cev_ue_status;       /* DWORD 0 */
++      u8 ctx_ue_status;       /* DWORD 0 */
++      u8 dbuf_ue_status;      /* DWORD 0 */
++      u8 erx_ue_status;       /* DWORD 0 */
++      u8 host_ue_status;      /* DWORD 0 */
++      u8 mpu_ue_status;       /* DWORD 0 */
++      u8 ndma_ue_status;      /* DWORD 0 */
++      u8 ptc_ue_status;       /* DWORD 0 */
++      u8 rdma_ue_status;      /* DWORD 0 */
++      u8 rxf_ue_status;       /* DWORD 0 */
++      u8 rxips_ue_status;     /* DWORD 0 */
++      u8 rxulp0_ue_status;    /* DWORD 0 */
++      u8 rxulp1_ue_status;    /* DWORD 0 */
++      u8 rxulp2_ue_status;    /* DWORD 0 */
++      u8 tim_ue_status;       /* DWORD 0 */
++      u8 tpost_ue_status;     /* DWORD 0 */
++      u8 tpre_ue_status;      /* DWORD 0 */
++      u8 txips_ue_status;     /* DWORD 0 */
++      u8 txulp0_ue_status;    /* DWORD 0 */
++      u8 txulp1_ue_status;    /* DWORD 0 */
++      u8 uc_ue_status;        /* DWORD 0 */
++      u8 wdma_ue_status;      /* DWORD 0 */
++      u8 txulp2_ue_status;    /* DWORD 0 */
++      u8 host1_ue_status;     /* DWORD 0 */
++      u8 p0_ob_link_ue_status;        /* DWORD 0 */
++      u8 p1_ob_link_ue_status;        /* DWORD 0 */
++      u8 host_gpio_ue_status; /* DWORD 0 */
++      u8 mbox_netw_ue_status; /* DWORD 0 */
++      u8 mbox_stor_ue_status; /* DWORD 0 */
++      u8 axgmac0_ue_status;   /* DWORD 0 */
++      u8 axgmac1_ue_status;   /* DWORD 0 */
++      u8 mpu_intpend_ue_status;       /* DWORD 0 */
++} __packed;
++struct PCICFG_UE_STATUS_LOW_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Unrecoverable Error Status (High) Register. Each bit corresponds to
++ * an internal Unrecoverable Error.  These are set by hardware and may be
++ * cleared by writing a one to the respective bit(s) to be cleared.  Any
++ * bit being set that is also unmasked will result in Unrecoverable Error
++ * interrupt notification to the host CPU and/or Server Management chip;
++ * and the transitioning of BladeEngine to an Offline state.
++ */
++struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP {
++      u8 jtag_ue_status;      /* DWORD 0 */
++      u8 lpcmemhost_ue_status;        /* DWORD 0 */
++      u8 mgmt_mac_ue_status;  /* DWORD 0 */
++      u8 mpu_iram_ue_status;  /* DWORD 0 */
++      u8 pcs0online_ue_status;        /* DWORD 0 */
++      u8 pcs1online_ue_status;        /* DWORD 0 */
++      u8 pctl0_ue_status;     /* DWORD 0 */
++      u8 pctl1_ue_status;     /* DWORD 0 */
++      u8 pmem_ue_status;      /* DWORD 0 */
++      u8 rr_ue_status;        /* DWORD 0 */
++      u8 rxpp_ue_status;      /* DWORD 0 */
++      u8 txpb_ue_status;      /* DWORD 0 */
++      u8 txp_ue_status;       /* DWORD 0 */
++      u8 xaui_ue_status;      /* DWORD 0 */
++      u8 arm_ue_status;       /* DWORD 0 */
++      u8 ipc_ue_status;       /* DWORD 0 */
++      u8 rsvd0[16];   /* DWORD 0 */
++} __packed;
++struct PCICFG_UE_STATUS_HI_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Unrecoverable Error Mask (Low) Register. Each bit, when set to one,
++ * will mask the associated Unrecoverable  Error status bit from notification
++ * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
++ * transitioning of all BladeEngine units to an Offline state.
++ */
++struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
++      u8 cev_ue_mask; /* DWORD 0 */
++      u8 ctx_ue_mask; /* DWORD 0 */
++      u8 dbuf_ue_mask;        /* DWORD 0 */
++      u8 erx_ue_mask; /* DWORD 0 */
++      u8 host_ue_mask;        /* DWORD 0 */
++      u8 mpu_ue_mask; /* DWORD 0 */
++      u8 ndma_ue_mask;        /* DWORD 0 */
++      u8 ptc_ue_mask; /* DWORD 0 */
++      u8 rdma_ue_mask;        /* DWORD 0 */
++      u8 rxf_ue_mask; /* DWORD 0 */
++      u8 rxips_ue_mask;       /* DWORD 0 */
++      u8 rxulp0_ue_mask;      /* DWORD 0 */
++      u8 rxulp1_ue_mask;      /* DWORD 0 */
++      u8 rxulp2_ue_mask;      /* DWORD 0 */
++      u8 tim_ue_mask; /* DWORD 0 */
++      u8 tpost_ue_mask;       /* DWORD 0 */
++      u8 tpre_ue_mask;        /* DWORD 0 */
++      u8 txips_ue_mask;       /* DWORD 0 */
++      u8 txulp0_ue_mask;      /* DWORD 0 */
++      u8 txulp1_ue_mask;      /* DWORD 0 */
++      u8 uc_ue_mask;  /* DWORD 0 */
++      u8 wdma_ue_mask;        /* DWORD 0 */
++      u8 txulp2_ue_mask;      /* DWORD 0 */
++      u8 host1_ue_mask;       /* DWORD 0 */
++      u8 p0_ob_link_ue_mask;  /* DWORD 0 */
++      u8 p1_ob_link_ue_mask;  /* DWORD 0 */
++      u8 host_gpio_ue_mask;   /* DWORD 0 */
++      u8 mbox_netw_ue_mask;   /* DWORD 0 */
++      u8 mbox_stor_ue_mask;   /* DWORD 0 */
++      u8 axgmac0_ue_mask;     /* DWORD 0 */
++      u8 axgmac1_ue_mask;     /* DWORD 0 */
++      u8 mpu_intpend_ue_mask; /* DWORD 0 */
++} __packed;
++struct PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Unrecoverable Error Mask (High) Register. Each bit, when set to one,
++ * will mask the associated Unrecoverable Error status bit from notification
++ * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
++ * transitioning of all BladeEngine units to an Offline state.
++ */
++struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
++      u8 jtag_ue_mask;        /* DWORD 0 */
++      u8 lpcmemhost_ue_mask;  /* DWORD 0 */
++      u8 mgmt_mac_ue_mask;    /* DWORD 0 */
++      u8 mpu_iram_ue_mask;    /* DWORD 0 */
++      u8 pcs0online_ue_mask;  /* DWORD 0 */
++      u8 pcs1online_ue_mask;  /* DWORD 0 */
++      u8 pctl0_ue_mask;       /* DWORD 0 */
++      u8 pctl1_ue_mask;       /* DWORD 0 */
++      u8 pmem_ue_mask;        /* DWORD 0 */
++      u8 rr_ue_mask;  /* DWORD 0 */
++      u8 rxpp_ue_mask;        /* DWORD 0 */
++      u8 txpb_ue_mask;        /* DWORD 0 */
++      u8 txp_ue_mask; /* DWORD 0 */
++      u8 xaui_ue_mask;        /* DWORD 0 */
++      u8 arm_ue_mask; /* DWORD 0 */
++      u8 ipc_ue_mask; /* DWORD 0 */
++      u8 rsvd0[16];   /* DWORD 0 */
++} __packed;
++struct PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Online Control Register 0. This register controls various units within
++ * BladeEngine being in an Online or Offline state.
++ */
++struct BE_PCICFG_ONLINE0_CSR_AMAP {
++      u8 cev_online;  /* DWORD 0 */
++      u8 ctx_online;  /* DWORD 0 */
++      u8 dbuf_online; /* DWORD 0 */
++      u8 erx_online;  /* DWORD 0 */
++      u8 host_online; /* DWORD 0 */
++      u8 mpu_online;  /* DWORD 0 */
++      u8 ndma_online; /* DWORD 0 */
++      u8 ptc_online;  /* DWORD 0 */
++      u8 rdma_online; /* DWORD 0 */
++      u8 rxf_online;  /* DWORD 0 */
++      u8 rxips_online;        /* DWORD 0 */
++      u8 rxulp0_online;       /* DWORD 0 */
++      u8 rxulp1_online;       /* DWORD 0 */
++      u8 rxulp2_online;       /* DWORD 0 */
++      u8 tim_online;  /* DWORD 0 */
++      u8 tpost_online;        /* DWORD 0 */
++      u8 tpre_online; /* DWORD 0 */
++      u8 txips_online;        /* DWORD 0 */
++      u8 txulp0_online;       /* DWORD 0 */
++      u8 txulp1_online;       /* DWORD 0 */
++      u8 uc_online;   /* DWORD 0 */
++      u8 wdma_online; /* DWORD 0 */
++      u8 txulp2_online;       /* DWORD 0 */
++      u8 host1_online;        /* DWORD 0 */
++      u8 p0_ob_link_online;   /* DWORD 0 */
++      u8 p1_ob_link_online;   /* DWORD 0 */
++      u8 host_gpio_online;    /* DWORD 0 */
++      u8 mbox_netw_online;    /* DWORD 0 */
++      u8 mbox_stor_online;    /* DWORD 0 */
++      u8 axgmac0_online;      /* DWORD 0 */
++      u8 axgmac1_online;      /* DWORD 0 */
++      u8 mpu_intpend_online;  /* DWORD 0 */
++} __packed;
++struct PCICFG_ONLINE0_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Online Control Register 1. This register controls various units within
++ * BladeEngine being in an Online or Offline state.
++ */
++struct BE_PCICFG_ONLINE1_CSR_AMAP {
++      u8 jtag_online; /* DWORD 0 */
++      u8 lpcmemhost_online;   /* DWORD 0 */
++      u8 mgmt_mac_online;     /* DWORD 0 */
++      u8 mpu_iram_online;     /* DWORD 0 */
++      u8 pcs0online_online;   /* DWORD 0 */
++      u8 pcs1online_online;   /* DWORD 0 */
++      u8 pctl0_online;        /* DWORD 0 */
++      u8 pctl1_online;        /* DWORD 0 */
++      u8 pmem_online; /* DWORD 0 */
++      u8 rr_online;   /* DWORD 0 */
++      u8 rxpp_online; /* DWORD 0 */
++      u8 txpb_online; /* DWORD 0 */
++      u8 txp_online;  /* DWORD 0 */
++      u8 xaui_online; /* DWORD 0 */
++      u8 arm_online;  /* DWORD 0 */
++      u8 ipc_online;  /* DWORD 0 */
++      u8 rsvd0[16];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ONLINE1_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Host Timer Register. */
++struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
++      u8 hosttimer[24];       /* DWORD 0 */
++      u8 hostintr;    /* DWORD 0 */
++      u8 rsvd0[7];    /* DWORD 0 */
++} __packed;
++struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* Scratchpad Register (for software use). */
++struct BE_PCICFG_SCRATCHPAD_CSR_AMAP {
++      u8 scratchpad[32];      /* DWORD 0 */
++} __packed;
++struct PCICFG_SCRATCHPAD_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express Capabilities Register. */
++struct BE_PCICFG_PCIE_CAP_CSR_AMAP {
++      u8 capid[8];    /* DWORD 0 */
++      u8 nextcap[8];  /* DWORD 0 */
++      u8 capver[4];   /* DWORD 0 */
++      u8 devport[4];  /* DWORD 0 */
++      u8 rsvd0[6];    /* DWORD 0 */
++      u8 rsvd1[2];    /* DWORD 0 */
++} __packed;
++struct PCICFG_PCIE_CAP_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express Device Capabilities Register. */
++struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP {
++      u8 payload[3];  /* DWORD 0 */
++      u8 rsvd0[3];    /* DWORD 0 */
++      u8 lo_lat[3];   /* DWORD 0 */
++      u8 l1_lat[3];   /* DWORD 0 */
++      u8 rsvd1[3];    /* DWORD 0 */
++      u8 rsvd2[3];    /* DWORD 0 */
++      u8 pwr_value[8];        /* DWORD 0 */
++      u8 pwr_scale[2];        /* DWORD 0 */
++      u8 rsvd3[4];    /* DWORD 0 */
++} __packed;
++struct PCICFG_PCIE_DEVCAP_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express Device Control/Status Registers. */
++struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
++      u8 CorrErrReportEn;     /* DWORD 0 */
++      u8 NonFatalErrReportEn; /* DWORD 0 */
++      u8 FatalErrReportEn;    /* DWORD 0 */
++      u8 UnsuppReqReportEn;   /* DWORD 0 */
++      u8 EnableRelaxOrder;    /* DWORD 0 */
++      u8 Max_Payload_Size[3]; /* DWORD 0 */
++      u8 ExtendTagFieldEnable;        /* DWORD 0 */
++      u8 PhantomFnEnable;     /* DWORD 0 */
++      u8 AuxPwrPMEnable;      /* DWORD 0 */
++      u8 EnableNoSnoop;       /* DWORD 0 */
++      u8 Max_Read_Req_Size[3];        /* DWORD 0 */
++      u8 rsvd0;               /* DWORD 0 */
++      u8 CorrErrDetect;       /* DWORD 0 */
++      u8 NonFatalErrDetect;   /* DWORD 0 */
++      u8 FatalErrDetect;      /* DWORD 0 */
++      u8 UnsuppReqDetect;     /* DWORD 0 */
++      u8 AuxPwrDetect;        /* DWORD 0 */
++      u8 TransPending;        /* DWORD 0 */
++      u8 rsvd1[10];   /* DWORD 0 */
++} __packed;
++struct PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express Link Capabilities Register. */
++struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP {
++      u8 MaxLinkSpeed[4];     /* DWORD 0 */
++      u8 MaxLinkWidth[6];     /* DWORD 0 */
++      u8 ASPMSupport[2];      /* DWORD 0 */
++      u8 L0sExitLat[3];       /* DWORD 0 */
++      u8 L1ExitLat[3];        /* DWORD 0 */
++      u8 rsvd0[6];    /* DWORD 0 */
++      u8 PortNum[8];  /* DWORD 0 */
++} __packed;
++struct PCICFG_PCIE_LINK_CAP_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express Link Status Register. */
++struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
++      u8 ASPMCtl[2];  /* DWORD 0 */
++      u8 rsvd0;               /* DWORD 0 */
++      u8 ReadCmplBndry;       /* DWORD 0 */
++      u8 LinkDisable; /* DWORD 0 */
++      u8 RetrainLink; /* DWORD 0 */
++      u8 CommonClkConfig;     /* DWORD 0 */
++      u8 ExtendSync;  /* DWORD 0 */
++      u8 rsvd1[8];    /* DWORD 0 */
++      u8 LinkSpeed[4];        /* DWORD 0 */
++      u8 NegLinkWidth[6];     /* DWORD 0 */
++      u8 LinkTrainErr;        /* DWORD 0 */
++      u8 LinkTrain;   /* DWORD 0 */
++      u8 SlotClkConfig;       /* DWORD 0 */
++      u8 rsvd2[3];    /* DWORD 0 */
++} __packed;
++struct PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express MSI Configuration Register. */
++struct BE_PCICFG_MSI_CSR_AMAP {
++      u8 capid[8];    /* DWORD 0 */
++      u8 nextptr[8];  /* DWORD 0 */
++      u8 tablesize[11];       /* DWORD 0 */
++      u8 rsvd0[3];    /* DWORD 0 */
++      u8 funcmask;    /* DWORD 0 */
++      u8 en;          /* DWORD 0 */
++} __packed;
++struct PCICFG_MSI_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* MSI-X Table Offset Register. */
++struct BE_PCICFG_MSIX_TABLE_CSR_AMAP {
++      u8 tablebir[3]; /* DWORD 0 */
++      u8 offset[29];  /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_TABLE_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* MSI-X PBA Offset Register. */
++struct BE_PCICFG_MSIX_PBA_CSR_AMAP {
++      u8 pbabir[3];   /* DWORD 0 */
++      u8 offset[29];  /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_PBA_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express MSI-X Message Vector Control Register. */
++struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
++      u8 vector_control;      /* DWORD 0 */
++      u8 rsvd0[31];   /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express MSI-X Message Data Register. */
++struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP {
++      u8 data[16];    /* DWORD 0 */
++      u8 rsvd0[16];   /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_MSG_DATA_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express MSI-X Message Address Register - High Part. */
++struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
++      u8 addr[32];    /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
++      u32 dw[1];
++};
++
++/* PCI Express MSI-X Message Address Register - Low Part. */
++struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
++      u8 rsvd0[2];    /* DWORD 0 */
++      u8 addr[30];    /* DWORD 0 */
++} __packed;
++struct PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_18_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ANON_18_RSVD_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_19_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ANON_19_RSVD_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_20_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[25][32];       /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_20_RSVD_AMAP {
++      u32 dw[26];
++};
++
++struct BE_PCICFG_ANON_21_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[1919][32];     /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_21_RSVD_AMAP {
++      u32 dw[1920];
++};
++
++struct BE_PCICFG_ANON_22_MESSAGE_AMAP {
++      struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
++      struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
++      struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
++      struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
++} __packed;
++struct PCICFG_ANON_22_MESSAGE_AMAP {
++      u32 dw[4];
++};
++
++struct BE_PCICFG_ANON_23_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[895][32];      /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_23_RSVD_AMAP {
++      u32 dw[896];
++};
++
++/* These PCI Configuration Space registers are for the Storage  Function of
++ * BladeEngine (Function 0). In the memory map of the registers below their
++ * table,
++ */
++struct BE_PCICFG0_CSRMAP_AMAP {
++      struct BE_PCICFG_ID_CSR_AMAP id;
++      u8 rsvd0[32];   /* DWORD 1 */
++      u8 rsvd1[32];   /* DWORD 2 */
++      u8 rsvd2[32];   /* DWORD 3 */
++      struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
++      struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
++      struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
++      struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
++      struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
++      struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
++      u8 rsvd3[32];   /* DWORD 10 */
++      struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP subsystem_id;
++      u8 rsvd4[32];   /* DWORD 12 */
++      u8 rsvd5[32];   /* DWORD 13 */
++      u8 rsvd6[32];   /* DWORD 14 */
++      u8 rsvd7[32];   /* DWORD 15 */
++      struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
++      struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
++      u8 rsvd8[32];   /* DWORD 21 */
++      struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
++      u8 rsvd9[32];   /* DWORD 23 */
++      u8 rsvd10[32];  /* DWORD 24 */
++      u8 rsvd11[32];  /* DWORD 25 */
++      u8 rsvd12[32];  /* DWORD 26 */
++      u8 rsvd13[32];  /* DWORD 27 */
++      u8 rsvd14[2][32];       /* DWORD 28 */
++      u8 rsvd15[32];  /* DWORD 30 */
++      u8 rsvd16[32];  /* DWORD 31 */
++      u8 rsvd17[8][32];       /* DWORD 32 */
++      struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
++      struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
++      struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
++      struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
++      struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
++      struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
++      u8 rsvd18[32];  /* DWORD 46 */
++      u8 rsvd19[32];  /* DWORD 47 */
++      u8 rsvd20[32];  /* DWORD 48 */
++      u8 rsvd21[32];  /* DWORD 49 */
++      struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
++      u8 rsvd22[32];  /* DWORD 51 */
++      struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
++      struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
++      struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
++      struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
++      struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
++      struct BE_PCICFG_MSI_CSR_AMAP msi;
++      struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
++      struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
++      u8 rsvd23[32];  /* DWORD 60 */
++      u8 rsvd24[32];  /* DWORD 61 */
++      u8 rsvd25[32];  /* DWORD 62 */
++      u8 rsvd26[32];  /* DWORD 63 */
++      u8 rsvd27[32];  /* DWORD 64 */
++      u8 rsvd28[32];  /* DWORD 65 */
++      u8 rsvd29[32];  /* DWORD 66 */
++      u8 rsvd30[32];  /* DWORD 67 */
++      u8 rsvd31[32];  /* DWORD 68 */
++      u8 rsvd32[32];  /* DWORD 69 */
++      u8 rsvd33[32];  /* DWORD 70 */
++      u8 rsvd34[32];  /* DWORD 71 */
++      u8 rsvd35[32];  /* DWORD 72 */
++      u8 rsvd36[32];  /* DWORD 73 */
++      u8 rsvd37[32];  /* DWORD 74 */
++      u8 rsvd38[32];  /* DWORD 75 */
++      u8 rsvd39[32];  /* DWORD 76 */
++      u8 rsvd40[32];  /* DWORD 77 */
++      u8 rsvd41[32];  /* DWORD 78 */
++      u8 rsvd42[32];  /* DWORD 79 */
++      u8 rsvd43[32];  /* DWORD 80 */
++      u8 rsvd44[32];  /* DWORD 81 */
++      u8 rsvd45[32];  /* DWORD 82 */
++      u8 rsvd46[32];  /* DWORD 83 */
++      u8 rsvd47[32];  /* DWORD 84 */
++      u8 rsvd48[32];  /* DWORD 85 */
++      u8 rsvd49[32];  /* DWORD 86 */
++      u8 rsvd50[32];  /* DWORD 87 */
++      u8 rsvd51[32];  /* DWORD 88 */
++      u8 rsvd52[32];  /* DWORD 89 */
++      u8 rsvd53[32];  /* DWORD 90 */
++      u8 rsvd54[32];  /* DWORD 91 */
++      u8 rsvd55[32];  /* DWORD 92 */
++      u8 rsvd56[832]; /* DWORD 93 */
++      u8 rsvd57[32];  /* DWORD 119 */
++      u8 rsvd58[32];  /* DWORD 120 */
++      u8 rsvd59[32];  /* DWORD 121 */
++      u8 rsvd60[32];  /* DWORD 122 */
++      u8 rsvd61[32];  /* DWORD 123 */
++      u8 rsvd62[32];  /* DWORD 124 */
++      u8 rsvd63[32];  /* DWORD 125 */
++      u8 rsvd64[32];  /* DWORD 126 */
++      u8 rsvd65[32];  /* DWORD 127 */
++      u8 rsvd66[61440];       /* DWORD 128 */
++      struct BE_PCICFG_ANON_22_MESSAGE_AMAP message[32];
++      u8 rsvd67[28672];       /* DWORD 2176 */
++      u8 rsvd68[32];  /* DWORD 3072 */
++      u8 rsvd69[1023][32];    /* DWORD 3073 */
++} __packed;
++struct PCICFG0_CSRMAP_AMAP {
++      u32 dw[4096];
++};
++
++struct BE_PCICFG_ANON_24_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ANON_24_RSVD_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_25_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ANON_25_RSVD_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_26_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++} __packed;
++struct PCICFG_ANON_26_RSVD_AMAP {
++      u32 dw[1];
++};
++
++struct BE_PCICFG_ANON_27_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[32];   /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_27_RSVD_AMAP {
++      u32 dw[2];
++};
++
++struct BE_PCICFG_ANON_28_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[3][32];        /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_28_RSVD_AMAP {
++      u32 dw[4];
++};
++
++struct BE_PCICFG_ANON_29_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[36][32];       /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_29_RSVD_AMAP {
++      u32 dw[37];
++};
++
++struct BE_PCICFG_ANON_30_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[1930][32];     /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_30_RSVD_AMAP {
++      u32 dw[1931];
++};
++
++struct BE_PCICFG_ANON_31_MESSAGE_AMAP {
++      struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
++      struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
++      struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
++      struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
++} __packed;
++struct PCICFG_ANON_31_MESSAGE_AMAP {
++      u32 dw[4];
++};
++
++struct BE_PCICFG_ANON_32_RSVD_AMAP {
++      u8 rsvd0[32];   /* DWORD 0 */
++      u8 rsvd1[895][32];      /* DWORD 1 */
++} __packed;
++struct PCICFG_ANON_32_RSVD_AMAP {
++      u32 dw[896];
++};
++
++/* This PCI configuration space register map is for the  Networking Function of
++ * BladeEngine (Function 1).
++ */
++struct BE_PCICFG1_CSRMAP_AMAP {
++      struct BE_PCICFG_ID_CSR_AMAP id;
++      u8 rsvd0[32];   /* DWORD 1 */
++      u8 rsvd1[32];   /* DWORD 2 */
++      u8 rsvd2[32];   /* DWORD 3 */
++      struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
++      struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
++      struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
++      struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
++      struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
++      struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
++      u8 rsvd3[32];   /* DWORD 10 */
++      struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP subsystem_id;
++      u8 rsvd4[32];   /* DWORD 12 */
++      u8 rsvd5[32];   /* DWORD 13 */
++      u8 rsvd6[32];   /* DWORD 14 */
++      u8 rsvd7[32];   /* DWORD 15 */
++      struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
++      struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
++      u8 rsvd8[32];   /* DWORD 21 */
++      struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
++      u8 rsvd9[32];   /* DWORD 23 */
++      u8 rsvd10[32];  /* DWORD 24 */
++      u8 rsvd11[32];  /* DWORD 25 */
++      u8 rsvd12[32];  /* DWORD 26 */
++      u8 rsvd13[32];  /* DWORD 27 */
++      u8 rsvd14[2][32];       /* DWORD 28 */
++      u8 rsvd15[32];  /* DWORD 30 */
++      u8 rsvd16[32];  /* DWORD 31 */
++      u8 rsvd17[8][32];       /* DWORD 32 */
++      struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
++      struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
++      struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
++      struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
++      struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
++      struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
++      u8 rsvd18[32];  /* DWORD 46 */
++      u8 rsvd19[32];  /* DWORD 47 */
++      u8 rsvd20[32];  /* DWORD 48 */
++      u8 rsvd21[32];  /* DWORD 49 */
++      struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
++      u8 rsvd22[32];  /* DWORD 51 */
++      struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
++      struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
++      struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
++      struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
++      struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
++      struct BE_PCICFG_MSI_CSR_AMAP msi;
++      struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
++      struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
++      u8 rsvd23[64];  /* DWORD 60 */
++      u8 rsvd24[32];  /* DWORD 62 */
++      u8 rsvd25[32];  /* DWORD 63 */
++      u8 rsvd26[32];  /* DWORD 64 */
++      u8 rsvd27[32];  /* DWORD 65 */
++      u8 rsvd28[32];  /* DWORD 66 */
++      u8 rsvd29[32];  /* DWORD 67 */
++      u8 rsvd30[32];  /* DWORD 68 */
++      u8 rsvd31[32];  /* DWORD 69 */
++      u8 rsvd32[32];  /* DWORD 70 */
++      u8 rsvd33[32];  /* DWORD 71 */
++      u8 rsvd34[32];  /* DWORD 72 */
++      u8 rsvd35[32];  /* DWORD 73 */
++      u8 rsvd36[32];  /* DWORD 74 */
++      u8 rsvd37[128]; /* DWORD 75 */
++      u8 rsvd38[32];  /* DWORD 79 */
++      u8 rsvd39[1184];        /* DWORD 80 */
++      u8 rsvd40[61792];       /* DWORD 117 */
++      struct BE_PCICFG_ANON_31_MESSAGE_AMAP message[32];
++      u8 rsvd41[28672];       /* DWORD 2176 */
++      u8 rsvd42[32];  /* DWORD 3072 */
++      u8 rsvd43[1023][32];    /* DWORD 3073 */
++} __packed;
++struct PCICFG1_CSRMAP_AMAP {
++      u32 dw[4096];
++};
++
++#endif /* __pcicfg_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/post_codes.h linux-2.6.29-rc3.owrt/drivers/staging/benet/post_codes.h
+--- linux-2.6.29.owrt/drivers/staging/benet/post_codes.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/post_codes.h   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,111 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __post_codes_amap_h__
++#define __post_codes_amap_h__
++
++/* --- MGMT_HBA_POST_STAGE_ENUM --- */
++#define POST_STAGE_POWER_ON_RESET   (0)       /* State after a cold or warm boot. */
++#define POST_STAGE_AWAITING_HOST_RDY (1)      /* ARM boot code awaiting a
++                                              go-ahed from  the host. */
++#define POST_STAGE_HOST_RDY (2)       /* Host has given go-ahed to ARM. */
++#define POST_STAGE_BE_RESET (3)       /* Host wants to reset chip, this is a  chip
++                                              workaround  */
++#define POST_STAGE_SEEPROM_CS_START (256)     /* SEEPROM checksum
++                                              test start. */
++#define POST_STAGE_SEEPROM_CS_DONE  (257)     /* SEEPROM checksum test
++                                                      done. */
++#define POST_STAGE_DDR_CONFIG_START (512)     /* DDR configuration start. */
++#define POST_STAGE_DDR_CONFIG_DONE  (513)     /* DDR configuration done. */
++#define POST_STAGE_DDR_CALIBRATE_START  (768) /* DDR calibration start. */
++#define POST_STAGE_DDR_CALIBRATE_DONE   (769) /* DDR calibration done. */
++#define POST_STAGE_DDR_TEST_START   (1024)    /* DDR memory test start. */
++#define POST_STAGE_DDR_TEST_DONE    (1025)    /* DDR memory test done. */
++#define POST_STAGE_REDBOOT_INIT_START   (1536)        /* Redboot starts execution. */
++#define POST_STAGE_REDBOOT_INIT_DONE (1537)   /* Redboot done execution. */
++#define POST_STAGE_FW_IMAGE_LOAD_START (1792) /* Firmware image load to
++                                                      DDR start. */
++#define POST_STAGE_FW_IMAGE_LOAD_DONE   (1793)        /* Firmware image load
++                                                      to DDR done. */
++#define POST_STAGE_ARMFW_START          (2048)        /* ARMfw runtime code
++                                              starts execution. */
++#define POST_STAGE_DHCP_QUERY_START     (2304)        /* DHCP server query start. */
++#define POST_STAGE_DHCP_QUERY_DONE      (2305)        /* DHCP server query done. */
++#define POST_STAGE_BOOT_TARGET_DISCOVERY_START (2560) /* Boot Target
++                                              Discovery Start. */
++#define POST_STAGE_BOOT_TARGET_DISCOVERY_DONE (2561)  /* Boot Target
++                                              Discovery Done. */
++#define POST_STAGE_RC_OPTION_SET        (2816)        /* Remote configuration
++                                              option is set in  SEEPROM  */
++#define POST_STAGE_SWITCH_LINK          (2817)        /* Wait for link up on switch */
++#define POST_STAGE_SEND_ICDS_MESSAGE    (2818)        /* Send the ICDS message
++                                              to switch */
++#define POST_STAGE_PERFROM_TFTP         (2819)        /* Download xml using TFTP */
++#define POST_STAGE_PARSE_XML            (2820)        /* Parse XML file */
++#define POST_STAGE_DOWNLOAD_IMAGE       (2821)        /* Download IMAGE from
++                                              TFTP server */
++#define POST_STAGE_FLASH_IMAGE          (2822)        /* Flash the IMAGE */
++#define POST_STAGE_RC_DONE              (2823)        /* Remote configuration
++                                              complete */
++#define POST_STAGE_REBOOT_SYSTEM        (2824)        /* Upgrade IMAGE done,
++                                              reboot required */
++#define POST_STAGE_MAC_ADDRESS          (3072)        /* MAC Address Check */
++#define POST_STAGE_ARMFW_READY          (49152)       /* ARMfw is done with POST
++                                              and ready. */
++#define POST_STAGE_ARMFW_UE             (61440)       /* ARMfw has asserted an
++                                              unrecoverable error. The
++                                              lower 3 hex digits of the
++                                              stage code identify the
++                                              unique error code.
++                                              */
++
++/* This structure defines the format of the MPU semaphore
++ * register when used for POST.
++ */
++struct BE_MGMT_HBA_POST_STATUS_STRUCT_AMAP {
++      u8 stage[16];   /* DWORD 0 */
++      u8 rsvd0[10];   /* DWORD 0 */
++      u8 iscsi_driver_loaded; /* DWORD 0 */
++      u8 option_rom_installed;        /* DWORD 0 */
++      u8 iscsi_ip_conflict;   /* DWORD 0 */
++      u8 iscsi_no_ip; /* DWORD 0 */
++      u8 backup_fw;   /* DWORD 0 */
++      u8 error;               /* DWORD 0 */
++} __packed;
++struct MGMT_HBA_POST_STATUS_STRUCT_AMAP {
++      u32 dw[1];
++};
++
++/* --- MGMT_HBA_POST_DUMMY_BITS_ENUM --- */
++#define POST_BIT_ISCSI_LOADED           (26)
++#define POST_BIT_OPTROM_INST            (27)
++#define POST_BIT_BAD_IP_ADDR            (28)
++#define POST_BIT_NO_IP_ADDR             (29)
++#define POST_BIT_BACKUP_FW              (30)
++#define POST_BIT_ERROR                  (31)
++
++/* --- MGMT_HBA_POST_DUMMY_VALUES_ENUM --- */
++#define POST_ISCSI_DRIVER_LOADED        (67108864)
++#define POST_OPTROM_INSTALLED           (134217728)
++#define POST_ISCSI_IP_ADDRESS_CONFLICT  (268435456)
++#define POST_ISCSI_NO_IP_ADDRESS        (536870912)
++#define POST_BACKUP_FW_LOADED           (1073741824)
++#define POST_FATAL_ERROR                (2147483648)
++
++#endif /* __post_codes_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/regmap.h linux-2.6.29-rc3.owrt/drivers/staging/benet/regmap.h
+--- linux-2.6.29.owrt/drivers/staging/benet/regmap.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/regmap.h       2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,68 @@
++/*
++ * Copyright (C) 2005 - 2008 ServerEngines
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.  The full GNU General
++ * Public License is included in this distribution in the file called COPYING.
++ *
++ * Contact Information:
++ * linux-drivers@serverengines.com
++ *
++ * ServerEngines
++ * 209 N. Fair Oaks Ave
++ * Sunnyvale, CA 94085
++ */
++/*
++ * Autogenerated by srcgen version: 0127
++ */
++#ifndef __regmap_amap_h__
++#define __regmap_amap_h__
++#include "pcicfg.h"
++#include "ep.h"
++#include "cev.h"
++#include "mpu.h"
++#include "doorbells.h"
++
++/*
++ * This is the control and status register map for BladeEngine, showing
++ * the relative size and offset of each sub-module. The CSR registers
++ * are identical for the network and storage PCI functions. The
++ * CSR map is shown below, followed by details of each block,
++ * in sub-sections.  The sub-sections begin with a description
++ * of CSRs that are instantiated in multiple blocks.
++ */
++struct BE_BLADE_ENGINE_CSRMAP_AMAP {
++      struct BE_MPU_CSRMAP_AMAP mpu;
++      u8 rsvd0[8192]; /* DWORD 256 */
++      u8 rsvd1[8192]; /* DWORD 512 */
++      struct BE_CEV_CSRMAP_AMAP cev;
++      u8 rsvd2[8192]; /* DWORD 1024 */
++      u8 rsvd3[8192]; /* DWORD 1280 */
++      u8 rsvd4[8192]; /* DWORD 1536 */
++      u8 rsvd5[8192]; /* DWORD 1792 */
++      u8 rsvd6[8192]; /* DWORD 2048 */
++      u8 rsvd7[8192]; /* DWORD 2304 */
++      u8 rsvd8[8192]; /* DWORD 2560 */
++      u8 rsvd9[8192]; /* DWORD 2816 */
++      u8 rsvd10[8192];        /* DWORD 3072 */
++      u8 rsvd11[8192];        /* DWORD 3328 */
++      u8 rsvd12[8192];        /* DWORD 3584 */
++      u8 rsvd13[8192];        /* DWORD 3840 */
++      u8 rsvd14[8192];        /* DWORD 4096 */
++      u8 rsvd15[8192];        /* DWORD 4352 */
++      u8 rsvd16[8192];        /* DWORD 4608 */
++      u8 rsvd17[8192];        /* DWORD 4864 */
++      u8 rsvd18[8192];        /* DWORD 5120 */
++      u8 rsvd19[8192];        /* DWORD 5376 */
++      u8 rsvd20[8192];        /* DWORD 5632 */
++      u8 rsvd21[8192];        /* DWORD 5888 */
++      u8 rsvd22[8192];        /* DWORD 6144 */
++      u8 rsvd23[17152][32];   /* DWORD 6400 */
++} __packed;
++struct BLADE_ENGINE_CSRMAP_AMAP {
++      u32 dw[23552];
++};
++
++#endif /* __regmap_amap_h__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/benet/TODO linux-2.6.29-rc3.owrt/drivers/staging/benet/TODO
+--- linux-2.6.29.owrt/drivers/staging/benet/TODO       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/staging/benet/TODO   2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,6 @@
++TODO:
++      - remove wrappers around common iowrite functions
++      - full netdev audit of common problems/issues
++
++Please send all patches and questions to Subbu Seetharaman
++<subbus@serverengines.com> and Greg Kroah-Hartman <greg@kroah.com>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/comedi/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/comedi/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/comedi/Kconfig   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/comedi/Kconfig       2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ config COMEDI
+       tristate "Data Acquision support (comedi)"
+       default N
+-      depends on m
+       ---help---
+         Enable support a wide range of data acquision devices
+         for Linux.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/Kconfig  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/Kconfig      2009-05-10 23:48:29.000000000 +0200
+@@ -73,6 +73,8 @@
+ source "drivers/staging/rt2870/Kconfig"
++source "drivers/staging/benet/Kconfig"
++
+ source "drivers/staging/comedi/Kconfig"
+ source "drivers/staging/asus_oled/Kconfig"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/Makefile linux-2.6.29-rc3.owrt/drivers/staging/Makefile
+--- linux-2.6.29.owrt/drivers/staging/Makefile 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/Makefile     2009-05-10 23:48:29.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_OTUS)            += otus/
+ obj-$(CONFIG_RT2860)          += rt2860/
+ obj-$(CONFIG_RT2870)          += rt2870/
++obj-$(CONFIG_BENET)           += benet/
+ obj-$(CONFIG_COMEDI)          += comedi/
+ obj-$(CONFIG_ASUS_OLED)               += asus_oled/
+ obj-$(CONFIG_PANEL)           += panel/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/meilhaus/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/meilhaus/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/meilhaus/Kconfig 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/meilhaus/Kconfig     2009-05-10 23:48:29.000000000 +0200
+@@ -4,7 +4,6 @@
+ menuconfig MEILHAUS
+       tristate "Meilhaus support"
+-      depends on m
+       ---help---
+         If you have a Meilhaus card, say Y (or M) here.
+@@ -19,7 +18,7 @@
+ config ME0600
+       tristate "Meilhaus ME-600 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-600 family of boards
+         that do data collection and multipurpose I/O.
+@@ -30,7 +29,7 @@
+ config ME0900
+       tristate "Meilhaus ME-900 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-900 family of boards
+         that do data collection and multipurpose I/O.
+@@ -41,7 +40,7 @@
+ config ME1000
+       tristate "Meilhaus ME-1000 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-1000 family of boards
+         that do data collection and multipurpose I/O.
+@@ -52,7 +51,7 @@
+ config ME1400
+       tristate "Meilhaus ME-1400 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-1400 family of boards
+         that do data collection and multipurpose I/O.
+@@ -63,7 +62,7 @@
+ config ME1600
+       tristate "Meilhaus ME-1600 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-1600 family of boards
+         that do data collection and multipurpose I/O.
+@@ -74,7 +73,7 @@
+ config ME4600
+       tristate "Meilhaus ME-4600 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-4600 family of boards
+         that do data collection and multipurpose I/O.
+@@ -85,7 +84,7 @@
+ config ME6000
+       tristate "Meilhaus ME-6000 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-6000 family of boards
+         that do data collection and multipurpose I/O.
+@@ -96,7 +95,7 @@
+ config ME8100
+       tristate "Meilhaus ME-8100 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-8100 family of boards
+         that do data collection and multipurpose I/O.
+@@ -107,7 +106,7 @@
+ config ME8200
+       tristate "Meilhaus ME-8200 support"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This driver supports the Meilhaus ME-8200 family of boards
+         that do data collection and multipurpose I/O.
+@@ -118,7 +117,7 @@
+ config MEDUMMY
+       tristate "Meilhaus dummy driver"
+       default n
+-      depends on PCI && m
++      depends on PCI
+       help
+         This provides a dummy driver for the Meilhaus driver package
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/panel/panel.c linux-2.6.29-rc3.owrt/drivers/staging/panel/panel.c
+--- linux-2.6.29.owrt/drivers/staging/panel/panel.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/panel/panel.c        2009-05-10 23:48:29.000000000 +0200
+@@ -622,7 +622,7 @@
+ }
+ /* sets ctrl & data port bits according to current signals values */
+-static void panel_set_bits(void)
++static void set_bits(void)
+ {
+       set_data_bits();
+       set_ctrl_bits();
+@@ -707,12 +707,12 @@
+        */
+       for (bit = 0; bit < 8; bit++) {
+               bits.cl = BIT_CLR;      /* CLK low */
+-              panel_set_bits();
++              set_bits();
+               bits.da = byte & 1;
+-              panel_set_bits();
++              set_bits();
+               udelay(2);      /* maintain the data during 2 us before CLK up */
+               bits.cl = BIT_SET;      /* CLK high */
+-              panel_set_bits();
++              set_bits();
+               udelay(1);      /* maintain the strobe during 1 us */
+               byte >>= 1;
+       }
+@@ -727,7 +727,7 @@
+       /* The backlight is activated by seting the AUTOFEED line to +5V  */
+       spin_lock(&pprt_lock);
+       bits.bl = on;
+-      panel_set_bits();
++      set_bits();
+       spin_unlock(&pprt_lock);
+ }
+@@ -2164,20 +2164,19 @@
+       if (scan_timer.function != NULL)
+               del_timer(&scan_timer);
+-      if (pprt != NULL) {
+-              if (keypad_enabled)
+-                      misc_deregister(&keypad_dev);
+-
+-              if (lcd_enabled) {
+-                      panel_lcd_print("\x0cLCD driver " PANEL_VERSION
+-                                      "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+-                      misc_deregister(&lcd_dev);
+-              }
++      if (keypad_enabled)
++              misc_deregister(&keypad_dev);
+-              /* TODO: free all input signals */
+-              parport_release(pprt);
+-              parport_unregister_device(pprt);
++      if (lcd_enabled) {
++              panel_lcd_print("\x0cLCD driver " PANEL_VERSION
++                              "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
++              misc_deregister(&lcd_dev);
+       }
++
++      /* TODO: free all input signals */
++
++      parport_release(pprt);
++      parport_unregister_device(pprt);
+       parport_unregister_driver(&panel_driver);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/poch/poch.c linux-2.6.29-rc3.owrt/drivers/staging/poch/poch.c
+--- linux-2.6.29.owrt/drivers/staging/poch/poch.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/poch/poch.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1026,7 +1026,7 @@
+               }
+               break;
+       case POCH_IOC_GET_COUNTERS:
+-              if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
++              if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
+                       return -EFAULT;
+               spin_lock_irq(&channel->counters_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+--- linux-2.6.29.owrt/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c        2009-05-10 23:48:29.000000000 +0200
+@@ -234,21 +234,20 @@
+ void ieee80211_crypto_deinit(void)
+ {
+       struct list_head *ptr, *n;
+-      struct ieee80211_crypto_alg *alg = NULL;
+       if (hcrypt == NULL)
+               return;
+-      list_for_each_safe(ptr, n, &hcrypt->algs) {
+-              alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
+-              if (alg) {
+-                      list_del(ptr);
+-                      printk(KERN_DEBUG
+-                             "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
+-                             alg->ops->name);
+-                      kfree(alg);
+-              }
++      for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
++           ptr = n, n = ptr->next) {
++              struct ieee80211_crypto_alg *alg =
++                      (struct ieee80211_crypto_alg *) ptr;
++              list_del(ptr);
++              printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
++                     "'%s' (deinit)\n", alg->ops->name);
++              kfree(alg);
+       }
++
+       kfree(hcrypt);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/rtl8187se/Kconfig linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/Kconfig
+--- linux-2.6.29.owrt/drivers/staging/rtl8187se/Kconfig        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/Kconfig    2009-05-10 23:48:29.000000000 +0200
+@@ -1,6 +1,5 @@
+ config RTL8187SE
+       tristate "RealTek RTL8187SE Wireless LAN NIC driver"
+       depends on PCI
+-      depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+       default N
+       ---help---
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/rtl8187se/r8180_core.c linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/r8180_core.c
+--- linux-2.6.29.owrt/drivers/staging/rtl8187se/r8180_core.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/rtl8187se/r8180_core.c       2009-05-10 23:48:29.000000000 +0200
+@@ -6161,10 +6161,10 @@
+ {
+       pci_unregister_driver (&rtl8180_pci_driver);
+       rtl8180_proc_module_remove();
++      ieee80211_crypto_deinit();
+       ieee80211_crypto_tkip_exit();
+       ieee80211_crypto_ccmp_exit();
+       ieee80211_crypto_wep_exit();
+-      ieee80211_crypto_deinit();
+       DMESG("Exiting");
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/usbip/usbip_common.c linux-2.6.29-rc3.owrt/drivers/staging/usbip/usbip_common.c
+--- linux-2.6.29.owrt/drivers/staging/usbip/usbip_common.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/usbip/usbip_common.c 2009-05-10 23:48:29.000000000 +0200
+@@ -406,20 +406,8 @@
+       /*
+        * threads are invoked per one device (per one connection).
+        */
+-      int retval;
+-
+-      retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
+-      if (retval < 0) {
+-              printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n",
+-                              ud);
+-              return;
+-      }
+-      retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+-      if (retval < 0) {
+-              printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n",
+-                              ud);
+-              return;
+-      }
++      kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
++      kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+       /* confirm threads are starting */
+       wait_for_completion(&ud->tcp_rx.thread_done);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/staging/winbond/wbusb.c linux-2.6.29-rc3.owrt/drivers/staging/winbond/wbusb.c
+--- linux-2.6.29.owrt/drivers/staging/winbond/wbusb.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/staging/winbond/wbusb.c      2009-05-10 23:48:29.000000000 +0200
+@@ -319,18 +319,16 @@
+       struct usb_device *udev = interface_to_usbdev(intf);
+       struct wbsoft_priv *priv;
+       struct ieee80211_hw *dev;
+-      int nr, err;
++      int err;
+       usb_get_dev(udev);
+       // 20060630.2 Check the device if it already be opened
+-      nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+-                           0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+-                           0x0, 0x400, &ltmp, 4, HZ*100 );
+-      if (nr < 0) {
+-              err = nr;
++      err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
++                            0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
++                            0x0, 0x400, &ltmp, 4, HZ*100 );
++      if (err)
+               goto error;
+-      }
+       ltmp = cpu_to_le32(ltmp);
+       if (ltmp) {  // Is already initialized?
+@@ -339,10 +337,8 @@
+       }
+       dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
+-      if (!dev) {
+-              err = -ENOMEM;
++      if (!dev)
+               goto error;
+-      }
+       priv = dev->priv;
+@@ -373,11 +369,9 @@
+       }
+       dev->extra_tx_headroom = 12;    /* FIXME */
+-      dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+-      dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
++      dev->flags = 0;
+       dev->channel_change_time = 1000;
+-      dev->max_signal = 100;
+       dev->queues = 1;
+       dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/atm/cxacru.c linux-2.6.29-rc3.owrt/drivers/usb/atm/cxacru.c
+--- linux-2.6.29.owrt/drivers/usb/atm/cxacru.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/atm/cxacru.c     2009-05-10 23:48:29.000000000 +0200
+@@ -485,7 +485,7 @@
+                       usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
+                               wbuflen, rbuflen);
+               ret = -ENOMEM;
+-              goto err;
++              goto fail;
+       }
+       mutex_lock(&instance->cm_serialize);
+@@ -565,7 +565,6 @@
+       dbg("cm %#x", cm);
+ fail:
+       mutex_unlock(&instance->cm_serialize);
+-err:
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/class/cdc-acm.c linux-2.6.29-rc3.owrt/drivers/usb/class/cdc-acm.c
+--- linux-2.6.29.owrt/drivers/usb/class/cdc-acm.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/class/cdc-acm.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1349,6 +1349,9 @@
+       { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
+       .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+       },
++      { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
++      .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
++      },
+       { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+       .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+       },
+@@ -1376,15 +1379,6 @@
+       { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+       .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+       },
+-      { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+-      },
+-      { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+-      .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+-                                         data interface instead of
+-                                         communications interface.
+-                                         Maybe we should define a new
+-                                         quirk for this. */
+-      },
+       /* control interfaces with various AT-command sets */
+       { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/class/usbtmc.c linux-2.6.29-rc3.owrt/drivers/usb/class/usbtmc.c
+--- linux-2.6.29.owrt/drivers/usb/class/usbtmc.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/class/usbtmc.c   2009-05-10 23:48:29.000000000 +0200
+@@ -50,7 +50,6 @@
+ static struct usb_device_id usbtmc_devices[] = {
+       { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
+-      { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
+       { 0, } /* terminating entry */
+ };
+ MODULE_DEVICE_TABLE(usb, usbtmc_devices);
+@@ -107,13 +106,12 @@
+ {
+       struct usb_interface *intf;
+       struct usbtmc_device_data *data;
+-      int retval = 0;
++      int retval = -ENODEV;
+       intf = usb_find_interface(&usbtmc_driver, iminor(inode));
+       if (!intf) {
+               printk(KERN_ERR KBUILD_MODNAME
+                      ": can not find device for minor %d", iminor(inode));
+-              retval = -ENODEV;
+               goto exit;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/core/devio.c linux-2.6.29-rc3.owrt/drivers/usb/core/devio.c
+--- linux-2.6.29.owrt/drivers/usb/core/devio.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/core/devio.c     2009-05-10 23:48:29.000000000 +0200
+@@ -359,6 +359,11 @@
+               spin_lock_irqsave(&ps->lock, flags);
+       }
+       spin_unlock_irqrestore(&ps->lock, flags);
++      as = async_getcompleted(ps);
++      while (as) {
++              free_async(as);
++              as = async_getcompleted(ps);
++      }
+ }
+ static void destroy_async_on_interface(struct dev_state *ps,
+@@ -638,7 +643,6 @@
+       struct dev_state *ps = file->private_data;
+       struct usb_device *dev = ps->dev;
+       unsigned int ifnum;
+-      struct async *as;
+       usb_lock_device(dev);
+@@ -657,12 +661,6 @@
+       usb_unlock_device(dev);
+       usb_put_dev(dev);
+       put_pid(ps->disc_pid);
+-
+-      as = async_getcompleted(ps);
+-      while (as) {
+-              free_async(as);
+-              as = async_getcompleted(ps);
+-      }
+       kfree(ps);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/core/hcd.h linux-2.6.29-rc3.owrt/drivers/usb/core/hcd.h
+--- linux-2.6.29.owrt/drivers/usb/core/hcd.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/core/hcd.h       2009-05-10 23:48:29.000000000 +0200
+@@ -257,6 +257,7 @@
+ #ifdef CONFIG_PM
+ extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
++extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
+ extern int usb_hcd_pci_resume(struct pci_dev *dev);
+ #endif /* CONFIG_PM */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/core/hcd-pci.c linux-2.6.29-rc3.owrt/drivers/usb/core/hcd-pci.c
+--- linux-2.6.29.owrt/drivers/usb/core/hcd-pci.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/core/hcd-pci.c   2009-05-10 23:48:29.000000000 +0200
+@@ -298,6 +298,19 @@
+ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
+ /**
++ * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
++ * @dev: USB Host Controller being resumed
++ *
++ * Store this function in the HCD's struct pci_driver as .resume_early.
++ */
++int usb_hcd_pci_resume_early(struct pci_dev *dev)
++{
++      pci_restore_state(dev);
++      return 0;
++}
++EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
++
++/**
+  * usb_hcd_pci_resume - power management resume of a PCI-based HCD
+  * @dev: USB Host Controller being resumed
+  *
+@@ -320,8 +333,6 @@
+       }
+ #endif
+-      pci_restore_state(dev);
+-
+       hcd = pci_get_drvdata(dev);
+       if (hcd->state != HC_STATE_SUSPENDED) {
+               dev_dbg(hcd->self.controller,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/core/message.c linux-2.6.29-rc3.owrt/drivers/usb/core/message.c
+--- linux-2.6.29.owrt/drivers/usb/core/message.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/core/message.c   2009-05-10 23:48:29.000000000 +0200
+@@ -653,7 +653,7 @@
+               if (result <= 0 && result != -ETIMEDOUT)
+                       continue;
+               if (result > 1 && ((u8 *)buf)[1] != type) {
+-                      result = -ENODATA;
++                      result = -EPROTO;
+                       continue;
+               }
+               break;
+@@ -696,13 +696,8 @@
+                       USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+                       (USB_DT_STRING << 8) + index, langid, buf, size,
+                       USB_CTRL_GET_TIMEOUT);
+-              if (result == 0 || result == -EPIPE)
+-                      continue;
+-              if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+-                      result = -ENODATA;
+-                      continue;
+-              }
+-              break;
++              if (!(result == 0 || result == -EPIPE))
++                      break;
+       }
+       return result;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/file_storage.c linux-2.6.29-rc3.owrt/drivers/usb/gadget/file_storage.c
+--- linux-2.6.29.owrt/drivers/usb/gadget/file_storage.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/file_storage.c    2009-05-10 23:48:29.000000000 +0200
+@@ -3879,11 +3879,7 @@
+       mod_data.protocol_type = USB_SC_SCSI;
+       mod_data.protocol_name = "Transparent SCSI";
+-      /* Some peripheral controllers are known not to be able to
+-       * halt bulk endpoints correctly.  If one of them is present,
+-       * disable stalls.
+-       */
+-      if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
++      if (gadget_is_sh(fsg->gadget))
+               mod_data.can_stall = 0;
+       if (mod_data.release == 0xffff) {       // Parameter wasn't set
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/f_obex.c linux-2.6.29-rc3.owrt/drivers/usb/gadget/f_obex.c
+--- linux-2.6.29.owrt/drivers/usb/gadget/f_obex.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/f_obex.c  2009-05-10 23:48:29.000000000 +0200
+@@ -366,9 +366,9 @@
+               f->hs_descriptors = usb_copy_descriptors(hs_function);
+               obex->hs.obex_in = usb_find_endpoint(hs_function,
+-                              f->hs_descriptors, &obex_hs_ep_in_desc);
++                              f->descriptors, &obex_hs_ep_in_desc);
+               obex->hs.obex_out = usb_find_endpoint(hs_function,
+-                              f->hs_descriptors, &obex_hs_ep_out_desc);
++                              f->descriptors, &obex_hs_ep_out_desc);
+       }
+       /* Avoid letting this gadget enumerate until the userspace
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/fsl_qe_udc.c linux-2.6.29-rc3.owrt/drivers/usb/gadget/fsl_qe_udc.c
+--- linux-2.6.29.owrt/drivers/usb/gadget/fsl_qe_udc.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/fsl_qe_udc.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1622,8 +1622,6 @@
+       nuke(ep, -ESHUTDOWN);
+       ep->desc = NULL;
+       ep->stopped = 1;
+-      ep->tx_req = NULL;
+-      qe_ep_reset(udc, ep->epnum);
+       spin_unlock_irqrestore(&udc->lock, flags);
+       cpm_muram_free(cpm_muram_offset(ep->rxbase));
+@@ -1683,11 +1681,14 @@
+               kfree(req);
+ }
+-static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req)
++/* queues (submits) an I/O request to an endpoint */
++static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
++                              gfp_t gfp_flags)
+ {
+       struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+       struct qe_req *req = container_of(_req, struct qe_req, req);
+       struct qe_udc *udc;
++      unsigned long flags;
+       int reval;
+       udc = ep->udc;
+@@ -1731,7 +1732,7 @@
+       list_add_tail(&req->queue, &ep->queue);
+       dev_vdbg(udc->dev, "gadget have request in %s! %d\n",
+                       ep->name, req->req.length);
+-
++      spin_lock_irqsave(&udc->lock, flags);
+       /* push the request to device */
+       if (ep_is_in(ep))
+               reval = ep_req_send(ep, req);
+@@ -1747,22 +1748,9 @@
+       if (ep->dir == USB_DIR_OUT)
+               reval = ep_req_receive(ep, req);
+-      return 0;
+-}
+-
+-/* queues (submits) an I/O request to an endpoint */
+-static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+-                     gfp_t gfp_flags)
+-{
+-      struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+-      struct qe_udc *udc = ep->udc;
+-      unsigned long flags;
+-      int ret;
+-
+-      spin_lock_irqsave(&udc->lock, flags);
+-      ret = __qe_ep_queue(_ep, _req);
+       spin_unlock_irqrestore(&udc->lock, flags);
+-      return ret;
++
++      return 0;
+ }
+ /* dequeues (cancels, unlinks) an I/O request from an endpoint */
+@@ -2020,7 +2008,7 @@
+       udc->ep0_dir = USB_DIR_IN;
+       /* data phase */
+-      status = __qe_ep_queue(&ep->ep, &req->req);
++      status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC);
+       if (status == 0)
+               return;
+@@ -2163,9 +2151,6 @@
+ {
+       unsigned char i;
+-      if (udc->usb_state == USB_STATE_DEFAULT)
+-              return 0;
+-
+       qe_usb_disable();
+       out_8(&udc->usb_regs->usb_usadr, 0);
+@@ -2457,12 +2442,8 @@
+       struct usb_ctlr __iomem *qe_usbregs;
+       qe_usbregs = udc->usb_regs;
+-      /* Spec says that we must enable the USB controller to change mode. */
++      /* Init the usb register */
+       out_8(&qe_usbregs->usb_usmod, 0x01);
+-      /* Mode changed, now disable it, since muram isn't initialized yet. */
+-      out_8(&qe_usbregs->usb_usmod, 0x00);
+-
+-      /* Initialize the rest. */
+       out_be16(&qe_usbregs->usb_usbmr, 0);
+       out_8(&qe_usbregs->usb_uscom, 0);
+       out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR);
+@@ -2623,10 +2604,6 @@
+                       (unsigned long)udc_controller);
+       /* request irq and disable DR  */
+       udc_controller->usb_irq = irq_of_parse_and_map(np, 0);
+-      if (!udc_controller->usb_irq) {
+-              ret = -EINVAL;
+-              goto err_noirq;
+-      }
+       ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0,
+                               driver_name, udc_controller);
+@@ -2648,8 +2625,6 @@
+ err6:
+       free_irq(udc_controller->usb_irq, udc_controller);
+ err5:
+-      irq_dispose_mapping(udc_controller->usb_irq);
+-err_noirq:
+       if (udc_controller->nullmap) {
+               dma_unmap_single(udc_controller->gadget.dev.parent,
+                       udc_controller->nullp, 256,
+@@ -2673,7 +2648,7 @@
+       iounmap(udc_controller->usb_regs);
+ err1:
+       kfree(udc_controller);
+-      udc_controller = NULL;
++
+       return ret;
+ }
+@@ -2735,7 +2710,6 @@
+       kfree(ep->txframe);
+       free_irq(udc_controller->usb_irq, udc_controller);
+-      irq_dispose_mapping(udc_controller->usb_irq);
+       tasklet_kill(&udc_controller->rx_tasklet);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/fsl_usb2_udc.c linux-2.6.29-rc3.owrt/drivers/usb/gadget/fsl_usb2_udc.c
+--- linux-2.6.29.owrt/drivers/usb/gadget/fsl_usb2_udc.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/fsl_usb2_udc.c    2009-05-10 23:48:29.000000000 +0200
+@@ -404,10 +404,7 @@
+       }
+       if (zlt)
+               tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+-
+       p_QH->max_pkt_length = cpu_to_le32(tmp);
+-      p_QH->next_dtd_ptr = 1;
+-      p_QH->size_ioc_int_sts = 0;
+       return;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/Kconfig linux-2.6.29-rc3.owrt/drivers/usb/gadget/Kconfig
+--- linux-2.6.29.owrt/drivers/usb/gadget/Kconfig       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/Kconfig   2009-05-10 23:48:29.000000000 +0200
+@@ -191,7 +191,6 @@
+       boolean "OMAP USB Device Controller"
+       depends on ARCH_OMAP
+       select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+-      select USB_OTG_UTILS if ARCH_OMAP
+       help
+          Many Texas Instruments OMAP processors have flexible full
+          speed USB device controllers, with support for up to 30
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/gadget/pxa25x_udc.c linux-2.6.29-rc3.owrt/drivers/usb/gadget/pxa25x_udc.c
+--- linux-2.6.29.owrt/drivers/usb/gadget/pxa25x_udc.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/gadget/pxa25x_udc.c      2009-05-10 23:48:29.000000000 +0200
+@@ -904,8 +904,8 @@
+       /* most IN status is the same, but ISO can't stall */
+       *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
+-              | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+-                      ? 0 : UDCCS_BI_SST);
++              | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
++                      ? 0 : UDCCS_BI_SST;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci.h linux-2.6.29-rc3.owrt/drivers/usb/host/ehci.h
+--- linux-2.6.29.owrt/drivers/usb/host/ehci.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci.h      2009-05-10 23:48:29.000000000 +0200
+@@ -87,10 +87,6 @@
+       int                     next_uframe;    /* scan periodic, start here */
+       unsigned                periodic_sched; /* periodic activity count */
+-      /* list of itds completed while clock_frame was still active */
+-      struct list_head        cached_itd_list;
+-      unsigned                clock_frame;
+-
+       /* per root hub port */
+       unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
+@@ -224,8 +220,6 @@
+       }
+ }
+-static void free_cached_itd_list(struct ehci_hcd *ehci);
+-
+ /*-------------------------------------------------------------------------*/
+ #include <linux/usb/ehci_def.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci-hcd.c linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-hcd.c
+--- linux-2.6.29.owrt/drivers/usb/host/ehci-hcd.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-hcd.c  2009-05-10 23:48:29.000000000 +0200
+@@ -485,7 +485,6 @@
+        * periodic_size can shrink by USBCMD update if hcc_params allows.
+        */
+       ehci->periodic_size = DEFAULT_I_TDPS;
+-      INIT_LIST_HEAD(&ehci->cached_itd_list);
+       if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
+               return retval;
+@@ -498,7 +497,6 @@
+       ehci->reclaim = NULL;
+       ehci->next_uframe = -1;
+-      ehci->clock_frame = -1;
+       /*
+        * dedicate a qh for the async ring head, since we couldn't unlink
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci-mem.c linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-mem.c
+--- linux-2.6.29.owrt/drivers/usb/host/ehci-mem.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-mem.c  2009-05-10 23:48:29.000000000 +0200
+@@ -128,7 +128,6 @@
+ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
+ {
+-      free_cached_itd_list(ehci);
+       if (ehci->async)
+               qh_put (ehci->async);
+       ehci->async = NULL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci-pci.c linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-pci.c
+--- linux-2.6.29.owrt/drivers/usb/host/ehci-pci.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-pci.c  2009-05-10 23:48:29.000000000 +0200
+@@ -432,6 +432,7 @@
+ #ifdef        CONFIG_PM
+       .suspend =      usb_hcd_pci_suspend,
++      .resume_early = usb_hcd_pci_resume_early,
+       .resume =       usb_hcd_pci_resume,
+ #endif
+       .shutdown =     usb_hcd_pci_shutdown,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci-q.c linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-q.c
+--- linux-2.6.29.owrt/drivers/usb/host/ehci-q.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-q.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1095,8 +1095,7 @@
+       prev->qh_next = qh->qh_next;
+       wmb ();
+-      /* If the controller isn't running, we don't have to wait for it */
+-      if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
++      if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) {
+               /* if (unlikely (qh->reclaim != 0))
+                *      this will recurse, probably not much
+                */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ehci-sched.c linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-sched.c
+--- linux-2.6.29.owrt/drivers/usb/host/ehci-sched.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ehci-sched.c        2009-05-10 23:48:29.000000000 +0200
+@@ -1004,8 +1004,7 @@
+               is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
+               stream->bEndpointAddress &= 0x0f;
+-              if (stream->ep)
+-                      stream->ep->hcpriv = NULL;
++              stream->ep->hcpriv = NULL;
+               if (stream->rescheduled) {
+                       ehci_info (ehci, "ep%d%s-iso rescheduled "
+@@ -1536,7 +1535,7 @@
+                                       struct ehci_itd, itd_list);
+                       list_move_tail (&itd->itd_list, &stream->td_list);
+                       itd->stream = iso_stream_get (stream);
+-                      itd->urb = urb;
++                      itd->urb = usb_get_urb (urb);
+                       itd_init (ehci, stream, itd);
+               }
+@@ -1645,7 +1644,7 @@
+       (void) disable_periodic(ehci);
+       ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+-      if (unlikely(list_is_singular(&stream->td_list))) {
++      if (unlikely (list_empty (&stream->td_list))) {
+               ehci_to_hcd(ehci)->self.bandwidth_allocated
+                               -= stream->bandwidth;
+               ehci_vdbg (ehci,
+@@ -1654,27 +1653,14 @@
+                       (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
+       }
+       iso_stream_put (ehci, stream);
+-
++      /* OK to recycle this ITD now that its completion callback ran. */
+ done:
++      usb_put_urb(urb);
+       itd->urb = NULL;
+-      if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+-              /* OK to recycle this ITD now. */
+-              itd->stream = NULL;
+-              list_move(&itd->itd_list, &stream->free_list);
+-              iso_stream_put(ehci, stream);
+-      } else {
+-              /* HW might remember this ITD, so we can't recycle it yet.
+-               * Move it to a safe place until a new frame starts.
+-               */
+-              list_move(&itd->itd_list, &ehci->cached_itd_list);
+-              if (stream->refcount == 2) {
+-                      /* If iso_stream_put() were called here, stream
+-                       * would be freed.  Instead, just prevent reuse.
+-                       */
+-                      stream->ep->hcpriv = NULL;
+-                      stream->ep = NULL;
+-              }
+-      }
++      itd->stream = NULL;
++      list_move(&itd->itd_list, &stream->free_list);
++      iso_stream_put(ehci, stream);
++
+       return retval;
+ }
+@@ -1948,7 +1934,7 @@
+                               struct ehci_sitd, sitd_list);
+               list_move_tail (&sitd->sitd_list, &stream->td_list);
+               sitd->stream = iso_stream_get (stream);
+-              sitd->urb = urb;
++              sitd->urb = usb_get_urb (urb);
+               sitd_patch(ehci, stream, sitd, sched, packet);
+               sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
+@@ -2033,7 +2019,7 @@
+       (void) disable_periodic(ehci);
+       ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+-      if (list_is_singular(&stream->td_list)) {
++      if (list_empty (&stream->td_list)) {
+               ehci_to_hcd(ehci)->self.bandwidth_allocated
+                               -= stream->bandwidth;
+               ehci_vdbg (ehci,
+@@ -2044,6 +2030,7 @@
+       iso_stream_put (ehci, stream);
+       /* OK to recycle this SITD now that its completion callback ran. */
+ done:
++      usb_put_urb(urb);
+       sitd->urb = NULL;
+       sitd->stream = NULL;
+       list_move(&sitd->sitd_list, &stream->free_list);
+@@ -2114,20 +2101,6 @@
+ /*-------------------------------------------------------------------------*/
+-static void free_cached_itd_list(struct ehci_hcd *ehci)
+-{
+-      struct ehci_itd *itd, *n;
+-
+-      list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+-              struct ehci_iso_stream  *stream = itd->stream;
+-              itd->stream = NULL;
+-              list_move(&itd->itd_list, &stream->free_list);
+-              iso_stream_put(ehci, stream);
+-      }
+-}
+-
+-/*-------------------------------------------------------------------------*/
+-
+ static void
+ scan_periodic (struct ehci_hcd *ehci)
+ {
+@@ -2142,17 +2115,10 @@
+        * Touches as few pages as possible:  cache-friendly.
+        */
+       now_uframe = ehci->next_uframe;
+-      if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
++      if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+               clock = ehci_readl(ehci, &ehci->regs->frame_index);
+-              clock_frame = (clock >> 3) % ehci->periodic_size;
+-      } else  {
++      else
+               clock = now_uframe + mod - 1;
+-              clock_frame = -1;
+-      }
+-      if (ehci->clock_frame != clock_frame) {
+-              free_cached_itd_list(ehci);
+-              ehci->clock_frame = clock_frame;
+-      }
+       clock %= mod;
+       clock_frame = clock >> 3;
+@@ -2311,10 +2277,6 @@
+                       /* rescan the rest of this frame, then ... */
+                       clock = now;
+                       clock_frame = clock >> 3;
+-                      if (ehci->clock_frame != clock_frame) {
+-                              free_cached_itd_list(ehci);
+-                              ehci->clock_frame = clock_frame;
+-                      }
+               } else {
+                       now_uframe++;
+                       now_uframe %= mod;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/ohci-pci.c linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-pci.c
+--- linux-2.6.29.owrt/drivers/usb/host/ohci-pci.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-pci.c  2009-05-10 23:48:29.000000000 +0200
+@@ -487,6 +487,7 @@
+ #ifdef        CONFIG_PM
+       .suspend =      usb_hcd_pci_suspend,
++      .resume_early = usb_hcd_pci_resume_early,
+       .resume =       usb_hcd_pci_resume,
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/uhci-hcd.c linux-2.6.29-rc3.owrt/drivers/usb/host/uhci-hcd.c
+--- linux-2.6.29.owrt/drivers/usb/host/uhci-hcd.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/uhci-hcd.c  2009-05-10 23:48:29.000000000 +0200
+@@ -942,6 +942,7 @@
+ #ifdef        CONFIG_PM
+       .suspend =      usb_hcd_pci_suspend,
++      .resume_early = usb_hcd_pci_resume_early,
+       .resume =       usb_hcd_pci_resume,
+ #endif        /* PM */
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/whci/asl.c linux-2.6.29-rc3.owrt/drivers/usb/host/whci/asl.c
+--- linux-2.6.29.owrt/drivers/usb/host/whci/asl.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/whci/asl.c  2009-05-10 23:48:29.000000000 +0200
+@@ -170,17 +170,12 @@
+ void asl_update(struct whc *whc, uint32_t wusbcmd)
+ {
+       struct wusbhc *wusbhc = &whc->wusbhc;
+-      long t;
+       mutex_lock(&wusbhc->mutex);
+       if (wusbhc->active) {
+               whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+-              t = wait_event_timeout(
+-                      whc->async_list_wq,
+-                      (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0,
+-                      msecs_to_jiffies(1000));
+-              if (t == 0)
+-                      whc_hw_error(whc, "ASL update timeout");
++              wait_event(whc->async_list_wq,
++                         (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0);
+       }
+       mutex_unlock(&wusbhc->mutex);
+ }
+@@ -227,13 +222,13 @@
+        * Now that the ASL is updated, complete the removal of any
+        * removed qsets.
+        */
+-      spin_lock_irq(&whc->lock);
++      spin_lock(&whc->lock);
+       list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
+               qset_remove_complete(whc, qset);
+       }
+-      spin_unlock_irq(&whc->lock);
++      spin_unlock(&whc->lock);
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/whci/hw.c linux-2.6.29-rc3.owrt/drivers/usb/host/whci/hw.c
+--- linux-2.6.29.owrt/drivers/usb/host/whci/hw.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/whci/hw.c   2009-05-10 23:48:29.000000000 +0200
+@@ -87,18 +87,3 @@
+       return ret;
+ }
+-
+-/**
+- * whc_hw_error - recover from a hardware error
+- * @whc:    the WHCI HC that broke.
+- * @reason: a description of the failure.
+- *
+- * Recover from broken hardware with a full reset.
+- */
+-void whc_hw_error(struct whc *whc, const char *reason)
+-{
+-      struct wusbhc *wusbhc = &whc->wusbhc;
+-
+-      dev_err(&whc->umc->dev, "hardware error: %s\n", reason);
+-      wusbhc_reset_all(wusbhc);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/whci/pzl.c linux-2.6.29-rc3.owrt/drivers/usb/host/whci/pzl.c
+--- linux-2.6.29.owrt/drivers/usb/host/whci/pzl.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/whci/pzl.c  2009-05-10 23:48:29.000000000 +0200
+@@ -183,17 +183,12 @@
+ void pzl_update(struct whc *whc, uint32_t wusbcmd)
+ {
+       struct wusbhc *wusbhc = &whc->wusbhc;
+-      long t;
+       mutex_lock(&wusbhc->mutex);
+       if (wusbhc->active) {
+               whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+-              t = wait_event_timeout(
+-                      whc->periodic_list_wq,
+-                      (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0,
+-                      msecs_to_jiffies(1000));
+-              if (t == 0)
+-                      whc_hw_error(whc, "PZL update timeout");
++              wait_event(whc->periodic_list_wq,
++                         (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0);
+       }
+       mutex_unlock(&wusbhc->mutex);
+ }
+@@ -255,13 +250,13 @@
+        * Now that the PZL is updated, complete the removal of any
+        * removed qsets.
+        */
+-      spin_lock_irq(&whc->lock);
++      spin_lock(&whc->lock);
+       list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
+               qset_remove_complete(whc, qset);
+       }
+-      spin_unlock_irq(&whc->lock);
++      spin_unlock(&whc->lock);
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/host/whci/whcd.h linux-2.6.29-rc3.owrt/drivers/usb/host/whci/whcd.h
+--- linux-2.6.29.owrt/drivers/usb/host/whci/whcd.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/host/whci/whcd.h 2009-05-10 23:48:29.000000000 +0200
+@@ -137,7 +137,6 @@
+ /* hw.c */
+ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
+ int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
+-void whc_hw_error(struct whc *whc, const char *reason);
+ /* wusb.c */
+ int whc_wusbhc_start(struct wusbhc *wusbhc);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/image/mdc800.c linux-2.6.29-rc3.owrt/drivers/usb/image/mdc800.c
+--- linux-2.6.29.owrt/drivers/usb/image/mdc800.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/image/mdc800.c   2009-05-10 23:48:29.000000000 +0200
+@@ -499,7 +499,6 @@
+       retval = usb_register_dev(intf, &mdc800_class);
+       if (retval) {
+               dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+-              mutex_unlock(&mdc800->io_lock);
+               return -ENODEV;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/Makefile linux-2.6.29-rc3.owrt/drivers/usb/Makefile
+--- linux-2.6.29.owrt/drivers/usb/Makefile     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/Makefile 2009-05-10 23:48:29.000000000 +0200
+@@ -11,7 +11,6 @@
+ obj-$(CONFIG_PCI)             += host/
+ obj-$(CONFIG_USB_EHCI_HCD)    += host/
+ obj-$(CONFIG_USB_ISP116X_HCD) += host/
+-obj-$(CONFIG_USB_ISP1760_HCD) += host/
+ obj-$(CONFIG_USB_OHCI_HCD)    += host/
+ obj-$(CONFIG_USB_UHCI_HCD)    += host/
+ obj-$(CONFIG_USB_FHCI_HCD)    += host/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/misc/adutux.c linux-2.6.29-rc3.owrt/drivers/usb/misc/adutux.c
+--- linux-2.6.29.owrt/drivers/usb/misc/adutux.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/misc/adutux.c    2009-05-10 23:48:29.000000000 +0200
+@@ -376,7 +376,7 @@
+       if (dev->open_count <= 0) {
+               dbg(1," %s : device not opened", __func__);
+               retval = -ENODEV;
+-              goto unlock;
++              goto exit;
+       }
+       adu_release_internal(dev);
+@@ -385,9 +385,9 @@
+               if (!dev->open_count)   /* ... and we're the last user */
+                       adu_delete(dev);
+       }
+-unlock:
+-      mutex_unlock(&adutux_mutex);
++
+ exit:
++      mutex_unlock(&adutux_mutex);
+       dbg(2," %s : leave, return value %d", __func__, retval);
+       return retval;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/misc/vstusb.c linux-2.6.29-rc3.owrt/drivers/usb/misc/vstusb.c
+--- linux-2.6.29.owrt/drivers/usb/misc/vstusb.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/misc/vstusb.c    2009-05-10 23:48:29.000000000 +0200
+@@ -401,7 +401,6 @@
+       }
+       if (copy_from_user(buf, buffer, count)) {
+-              mutex_unlock(&vstdev->lock);
+               dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__);
+               retval = -EFAULT;
+               goto exit;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/musb/davinci.c linux-2.6.29-rc3.owrt/drivers/usb/musb/davinci.c
+--- linux-2.6.29.owrt/drivers/usb/musb/davinci.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/musb/davinci.c   2009-05-10 23:48:29.000000000 +0200
+@@ -377,8 +377,18 @@
+       u32             revision;
+       musb->mregs += DAVINCI_BASE_OFFSET;
++#if 0
++      /* REVISIT there's something odd about clocking, this
++       * didn't appear do the job ...
++       */
++      musb->clock = clk_get(pDevice, "usb");
++      if (IS_ERR(musb->clock))
++              return PTR_ERR(musb->clock);
+-      clk_enable(musb->clock);
++      status = clk_enable(musb->clock);
++      if (status < 0)
++              return -ENODEV;
++#endif
+       /* returns zero if e.g. not clocked */
+       revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+@@ -443,8 +453,5 @@
+       }
+       phy_off();
+-
+-      clk_disable(musb->clock);
+-
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/musb/musb_core.c linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_core.c
+--- linux-2.6.29.owrt/drivers/usb/musb/musb_core.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_core.c 2009-05-10 23:48:29.000000000 +0200
+@@ -115,7 +115,7 @@
+ unsigned musb_debug;
+-module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
++module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
+ #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+@@ -767,7 +767,6 @@
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+               case OTG_STATE_A_HOST:
+               case OTG_STATE_A_SUSPEND:
+-                      usb_hcd_resume_root_hub(musb_to_hcd(musb));
+                       musb_root_disconnect(musb);
+                       if (musb->a_wait_bcon != 0)
+                               musb_platform_try_idle(musb, jiffies
+@@ -1816,7 +1815,7 @@
+ #ifdef CONFIG_SYSFS
+       device_remove_file(musb->controller, &dev_attr_mode);
+       device_remove_file(musb->controller, &dev_attr_vbus);
+-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
++#ifdef CONFIG_USB_MUSB_OTG
+       device_remove_file(musb->controller, &dev_attr_srp);
+ #endif
+ #endif
+@@ -2064,7 +2063,7 @@
+ #ifdef CONFIG_SYSFS
+       device_remove_file(musb->controller, &dev_attr_mode);
+       device_remove_file(musb->controller, &dev_attr_vbus);
+-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
++#ifdef CONFIG_USB_MUSB_OTG
+       device_remove_file(musb->controller, &dev_attr_srp);
+ #endif
+ #endif
+@@ -2244,10 +2243,10 @@
+       return platform_driver_probe(&musb_driver, musb_probe);
+ }
+-/* make us init after usbcore and i2c (transceivers, regulators, etc)
+- * and before usb gadget and host-side drivers start to register
++/* make us init after usbcore and before usb
++ * gadget and host-side drivers start to register
+  */
+-fs_initcall(musb_init);
++subsys_initcall(musb_init);
+ static void __exit musb_cleanup(void)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/musb/musb_gadget.c linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_gadget.c
+--- linux-2.6.29.owrt/drivers/usb/musb/musb_gadget.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_gadget.c       2009-05-10 23:48:29.000000000 +0200
+@@ -575,7 +575,7 @@
+       struct usb_request      *request = &req->request;
+       struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_out;
+       void __iomem            *epio = musb->endpoints[epnum].regs;
+-      unsigned                fifo_count = 0;
++      u16                     fifo_count = 0;
+       u16                     len = musb_ep->packet_sz;
+       csr = musb_readw(epio, MUSB_RXCSR);
+@@ -687,7 +687,7 @@
+                                       len, fifo_count,
+                                       musb_ep->packet_sz);
+-                      fifo_count = min_t(unsigned, len, fifo_count);
++                      fifo_count = min(len, fifo_count);
+ #ifdef        CONFIG_USB_TUSB_OMAP_DMA
+                       if (tusb_dma_omap() && musb_ep->dma) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/musb/musb_host.c linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_host.c
+--- linux-2.6.29.owrt/drivers/usb/musb/musb_host.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/musb/musb_host.c 2009-05-10 23:48:29.000000000 +0200
+@@ -335,11 +335,16 @@
+ static struct musb_qh *
+ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+ {
++      int                     is_in;
+       struct musb_hw_ep       *ep = qh->hw_ep;
+       struct musb             *musb = ep->musb;
+-      int                     is_in = usb_pipein(urb->pipe);
+       int                     ready = qh->is_ready;
++      if (ep->is_shared_fifo)
++              is_in = 1;
++      else
++              is_in = usb_pipein(urb->pipe);
++
+       /* save toggle eagerly, for paranoia */
+       switch (qh->type) {
+       case USB_ENDPOINT_XFER_BULK:
+@@ -427,7 +432,7 @@
+       else
+               qh = musb_giveback(qh, urb, urb->status);
+-      if (qh != NULL && qh->is_ready) {
++      if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+               DBG(4, "... next ep%d %cX urb %p\n",
+                               hw_ep->epnum, is_in ? 'R' : 'T',
+                               next_urb(qh));
+@@ -937,8 +942,8 @@
+       switch (musb->ep0_stage) {
+       case MUSB_EP0_IN:
+               fifo_dest = urb->transfer_buffer + urb->actual_length;
+-              fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+-                                 urb->actual_length);
++              fifo_count = min(len, ((u16) (urb->transfer_buffer_length
++                                      - urb->actual_length)));
+               if (fifo_count < len)
+                       urb->status = -EOVERFLOW;
+@@ -971,9 +976,10 @@
+               }
+               /* FALLTHROUGH */
+       case MUSB_EP0_OUT:
+-              fifo_count = min_t(size_t, qh->maxpacket,
+-                                 urb->transfer_buffer_length -
+-                                 urb->actual_length);
++              fifo_count = min(qh->maxpacket, ((u16)
++                              (urb->transfer_buffer_length
++                              - urb->actual_length)));
++
+               if (fifo_count) {
+                       fifo_dest = (u8 *) (urb->transfer_buffer
+                                       + urb->actual_length);
+@@ -1155,8 +1161,7 @@
+       struct urb              *urb;
+       struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+       void __iomem            *epio = hw_ep->regs;
+-      struct musb_qh          *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+-                                                          : hw_ep->out_qh;
++      struct musb_qh          *qh = hw_ep->out_qh;
+       u32                     status = 0;
+       void __iomem            *mbase = musb->mregs;
+       struct dma_channel      *dma;
+@@ -1303,8 +1308,7 @@
+                * packets before updating TXCSR ... other docs disagree ...
+                */
+               /* PIO:  start next packet in this URB */
+-              if (wLength > qh->maxpacket)
+-                      wLength = qh->maxpacket;
++              wLength = min(qh->maxpacket, (u16) wLength);
+               musb_write_fifo(hw_ep, wLength, buf);
+               qh->segsize = wLength;
+@@ -1863,21 +1867,19 @@
+       }
+       qh->type_reg = type_reg;
+-      /* Precompute RXINTERVAL/TXINTERVAL register */
++      /* precompute rxinterval/txinterval register */
++      interval = min((u8)16, epd->bInterval); /* log encoding */
+       switch (qh->type) {
+       case USB_ENDPOINT_XFER_INT:
+-              /*
+-               * Full/low speeds use the  linear encoding,
+-               * high speed uses the logarithmic encoding.
+-               */
+-              if (urb->dev->speed <= USB_SPEED_FULL) {
+-                      interval = max_t(u8, epd->bInterval, 1);
+-                      break;
++              /* fullspeed uses linear encoding */
++              if (USB_SPEED_FULL == urb->dev->speed) {
++                      interval = epd->bInterval;
++                      if (!interval)
++                              interval = 1;
+               }
+               /* FALLTHROUGH */
+       case USB_ENDPOINT_XFER_ISOC:
+-              /* ISO always uses logarithmic encoding */
+-              interval = min_t(u8, epd->bInterval, 16);
++              /* iso always uses log encoding */
+               break;
+       default:
+               /* REVISIT we actually want to use NAK limits, hinting to the
+@@ -2035,9 +2037,9 @@
+               goto done;
+       /* Any URB not actively programmed into endpoint hardware can be
+-       * immediately given back; that's any URB not at the head of an
++       * immediately given back.  Such an URB must be at the head of its
+        * endpoint queue, unless someday we get real DMA queues.  And even
+-       * if it's at the head, it might not be known to the hardware...
++       * then, it might not be known to the hardware...
+        *
+        * Otherwise abort current transfer, pending dma, etc.; urb->status
+        * has already been updated.  This is a synchronous abort; it'd be
+@@ -2076,15 +2078,6 @@
+               qh->is_ready = 0;
+               __musb_giveback(musb, urb, 0);
+               qh->is_ready = ready;
+-
+-              /* If nothing else (usually musb_giveback) is using it
+-               * and its URB list has emptied, recycle this qh.
+-               */
+-              if (ready && list_empty(&qh->hep->urb_list)) {
+-                      qh->hep->hcpriv = NULL;
+-                      list_del(&qh->ring);
+-                      kfree(qh);
+-              }
+       } else
+               ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ done:
+@@ -2100,15 +2093,14 @@
+       unsigned long           flags;
+       struct musb             *musb = hcd_to_musb(hcd);
+       u8                      is_in = epnum & USB_DIR_IN;
+-      struct musb_qh          *qh;
+-      struct urb              *urb;
++      struct musb_qh          *qh = hep->hcpriv;
++      struct urb              *urb, *tmp;
+       struct list_head        *sched;
+-      spin_lock_irqsave(&musb->lock, flags);
++      if (!qh)
++              return;
+-      qh = hep->hcpriv;
+-      if (qh == NULL)
+-              goto exit;
++      spin_lock_irqsave(&musb->lock, flags);
+       switch (qh->type) {
+       case USB_ENDPOINT_XFER_CONTROL:
+@@ -2143,28 +2135,13 @@
+               /* cleanup */
+               musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
++      } else
++              urb = NULL;
+-              /* Then nuke all the others ... and advance the
+-               * queue on hw_ep (e.g. bulk ring) when we're done.
+-               */
+-              while (!list_empty(&hep->urb_list)) {
+-                      urb = next_urb(qh);
+-                      urb->status = -ESHUTDOWN;
+-                      musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+-              }
+-      } else {
+-              /* Just empty the queue; the hardware is busy with
+-               * other transfers, and since !qh->is_ready nothing
+-               * will activate any of these as it advances.
+-               */
+-              while (!list_empty(&hep->urb_list))
+-                      __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
++      /* then just nuke all the others */
++      list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
++              musb_giveback(qh, urb, -ESHUTDOWN);
+-              hep->hcpriv = NULL;
+-              list_del(&qh->ring);
+-              kfree(qh);
+-      }
+-exit:
+       spin_unlock_irqrestore(&musb->lock, flags);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/aircable.c linux-2.6.29-rc3.owrt/drivers/usb/serial/aircable.c
+--- linux-2.6.29.owrt/drivers/usb/serial/aircable.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/aircable.c        2009-05-10 23:48:29.000000000 +0200
+@@ -621,9 +621,9 @@
+               goto failed_usb_register;
+       return 0;
+-failed_usb_register:
+-      usb_serial_deregister(&aircable_device);
+ failed_serial_register:
++      usb_serial_deregister(&aircable_device);
++failed_usb_register:
+       return retval;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/cp2101.c linux-2.6.29-rc3.owrt/drivers/usb/serial/cp2101.c
+--- linux-2.6.29.owrt/drivers/usb/serial/cp2101.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/cp2101.c  2009-05-10 23:48:29.000000000 +0200
+@@ -79,7 +79,6 @@
+       { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+       { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+       { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+-      { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+       { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+       { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+       { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/ftdi_sio.c linux-2.6.29-rc3.owrt/drivers/usb/serial/ftdi_sio.c
+--- linux-2.6.29.owrt/drivers/usb/serial/ftdi_sio.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/ftdi_sio.c        2009-05-10 23:48:29.000000000 +0200
+@@ -662,12 +662,6 @@
+       { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+       { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+       { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
+-      { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
+-      { USB_DEVICE(ATMEL_VID, STK541_PID) },
+-      { USB_DEVICE(DE_VID, STB_PID) },
+-      { USB_DEVICE(DE_VID, WHT_PID) },
+-      { USB_DEVICE(ADI_VID, ADI_GNICE_PID),
+-              .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+       { },                                    /* Optional parameter entry */
+       { }                                     /* Terminating entry */
+ };
+@@ -1070,10 +1064,8 @@
+       if (!capable(CAP_SYS_ADMIN)) {
+               if (((new_serial.flags & ~ASYNC_USR_MASK) !=
+-                   (priv->flags & ~ASYNC_USR_MASK))) {
+-                      unlock_kernel();
++                   (priv->flags & ~ASYNC_USR_MASK)))
+                       return -EPERM;
+-              }
+               priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
+                              (new_serial.flags & ASYNC_USR_MASK));
+               priv->custom_divisor = new_serial.custom_divisor;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/ftdi_sio.h linux-2.6.29-rc3.owrt/drivers/usb/serial/ftdi_sio.h
+--- linux-2.6.29.owrt/drivers/usb/serial/ftdi_sio.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/ftdi_sio.h        2009-05-10 23:48:29.000000000 +0200
+@@ -844,9 +844,6 @@
+ #define TML_VID                       0x1B91  /* Vendor ID */
+ #define TML_USB_SERIAL_PID    0x0064  /* USB - Serial Converter */
+-/* NDI Polaris System */
+-#define FTDI_NDI_HUC_PID        0xDA70
+-
+ /* Propox devices */
+ #define FTDI_PROPOX_JTAGCABLEII_PID   0xD738
+@@ -893,26 +890,6 @@
+ #define DIEBOLD_BCS_SE923_PID 0xfb99
+ /*
+- * Atmel STK541
+- */
+-#define ATMEL_VID             0x03eb /* Vendor ID */
+-#define STK541_PID            0x2109 /* Zigbee Controller */
+-
+-/*
+- * Dresden Elektronic Sensor Terminal Board
+- */
+-#define DE_VID                        0x1cf1 /* Vendor ID */
+-#define STB_PID                       0x0001 /* Sensor Terminal Board */
+-#define WHT_PID                       0x0004 /* Wireless Handheld Terminal */
+-
+-/*
+- * Blackfin gnICE JTAG
+- * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+- */
+-#define ADI_VID               0x0456
+-#define ADI_GNICE_PID                 0xF000
+-
+-/*
+  *   BmRequestType:  1100 0000b
+  *   bRequest:       FTDI_E2_READ
+  *   wValue:         0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/option.c linux-2.6.29-rc3.owrt/drivers/usb/serial/option.c
+--- linux-2.6.29.owrt/drivers/usb/serial/option.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/option.c  2009-05-10 23:48:29.000000000 +0200
+@@ -89,7 +89,6 @@
+ #define OPTION_PRODUCT_ETNA_MODEM_GT          0x7041
+ #define OPTION_PRODUCT_ETNA_MODEM_EX          0x7061
+ #define OPTION_PRODUCT_ETNA_KOI_MODEM         0x7100
+-#define OPTION_PRODUCT_GTM380_MODEM           0x7201
+ #define HUAWEI_VENDOR_ID                      0x12D1
+ #define HUAWEI_PRODUCT_E600                   0x1001
+@@ -198,18 +197,16 @@
+ /* OVATION PRODUCTS */
+ #define NOVATELWIRELESS_PRODUCT_MC727         0x4100
+ #define NOVATELWIRELESS_PRODUCT_MC950D                0x4400
+-#define NOVATELWIRELESS_PRODUCT_U727          0x5010
+ /* FUTURE NOVATEL PRODUCTS */
+-#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED        0X6000
+-#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED        0X6001
+-#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED        0X7000
+-#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED        0X7001
+-#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED       0X8000
+-#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED       0X8001
+-#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED       0X9000
+-#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED       0X9001
+-#define NOVATELWIRELESS_PRODUCT_GLOBAL                0XA001
++#define NOVATELWIRELESS_PRODUCT_EVDO_1                0x6000
++#define NOVATELWIRELESS_PRODUCT_HSPA_1                0x7000
++#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1    0x8000
++#define NOVATELWIRELESS_PRODUCT_GLOBAL_1      0x9000
++#define NOVATELWIRELESS_PRODUCT_EVDO_2                0x6001
++#define NOVATELWIRELESS_PRODUCT_HSPA_2                0x7001
++#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2    0x8001
++#define NOVATELWIRELESS_PRODUCT_GLOBAL_2      0x9001
+ /* AMOI PRODUCTS */
+ #define AMOI_VENDOR_ID                                0x1614
+@@ -219,27 +216,6 @@
+ #define DELL_VENDOR_ID                                0x413C
+-/* Dell modems */
+-#define DELL_PRODUCT_5700_MINICARD            0x8114
+-#define DELL_PRODUCT_5500_MINICARD            0x8115
+-#define DELL_PRODUCT_5505_MINICARD            0x8116
+-#define DELL_PRODUCT_5700_EXPRESSCARD         0x8117
+-#define DELL_PRODUCT_5510_EXPRESSCARD         0x8118
+-
+-#define DELL_PRODUCT_5700_MINICARD_SPRINT     0x8128
+-#define DELL_PRODUCT_5700_MINICARD_TELUS      0x8129
+-
+-#define DELL_PRODUCT_5720_MINICARD_VZW                0x8133
+-#define DELL_PRODUCT_5720_MINICARD_SPRINT     0x8134
+-#define DELL_PRODUCT_5720_MINICARD_TELUS      0x8135
+-#define DELL_PRODUCT_5520_MINICARD_CINGULAR   0x8136
+-#define DELL_PRODUCT_5520_MINICARD_GENERIC_L  0x8137
+-#define DELL_PRODUCT_5520_MINICARD_GENERIC_I  0x8138
+-
+-#define DELL_PRODUCT_5730_MINICARD_SPRINT     0x8180
+-#define DELL_PRODUCT_5730_MINICARD_TELUS      0x8181
+-#define DELL_PRODUCT_5730_MINICARD_VZW                0x8182
+-
+ #define KYOCERA_VENDOR_ID                     0x0c88
+ #define KYOCERA_PRODUCT_KPC650                        0x17da
+ #define KYOCERA_PRODUCT_KPC680                        0x180a
+@@ -290,13 +266,19 @@
+ /* ZTE PRODUCTS */
+ #define ZTE_VENDOR_ID                         0x19d2
+-#define ZTE_PRODUCT_MF622                     0x0001
+ #define ZTE_PRODUCT_MF628                     0x0015
+ #define ZTE_PRODUCT_MF626                     0x0031
+ #define ZTE_PRODUCT_CDMA_TECH                 0xfffe
+-#define BENQ_VENDOR_ID                                0x04a5
+-#define BENQ_PRODUCT_H10                      0x4068
++/* Ericsson products */
++#define ERICSSON_VENDOR_ID                    0x0bdb
++#define ERICSSON_PRODUCT_F3507G                       0x1900
++
++/* Pantech products */
++#define PANTECH_VENDOR_ID                     0x106c
++#define PANTECH_PRODUCT_PC5740                        0x3701
++#define PANTECH_PRODUCT_PC5750                        0x3702  /* PX-500 */
++#define PANTECH_PRODUCT_UM150                 0x3711
+ static struct usb_device_id option_ids[] = {
+       { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
+@@ -323,7 +305,6 @@
+       { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
+       { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
+       { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+-      { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) },
+       { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+       { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+       { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+@@ -414,37 +395,31 @@
+       { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
+       { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
+       { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, /* Novatel EVDO product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, /* Novatel HSPA product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, /* Novatel EVDO Embedded product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, /* Novatel HSPA Embedded product */
+-      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL) }, /* Novatel Global product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */
++      { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */
+       { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
+       { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
+       { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },             /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },             /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) },             /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) },          /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) },          /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) },      /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) },       /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) },         /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) },      /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) },       /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) },    /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) },   /* Dell Wireless HSDPA 5520 */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) },   /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },      /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },       /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+-      { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) },         /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
++      { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */
+       { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },   /* ADU-E100, ADU-310 */
+       { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+       { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
+@@ -509,12 +484,13 @@
+       { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+       { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
+       { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+-      { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
+       { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
+       { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+       { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+-      { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+-      { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
++      { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
++      { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) },
++      { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) },
++      { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) },
+       { } /* Terminating entry */
+ };
+ MODULE_DEVICE_TABLE(usb, option_ids);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/ti_usb_3410_5052.c linux-2.6.29-rc3.owrt/drivers/usb/serial/ti_usb_3410_5052.c
+--- linux-2.6.29.owrt/drivers/usb/serial/ti_usb_3410_5052.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/ti_usb_3410_5052.c        2009-05-10 23:48:29.000000000 +0200
+@@ -176,7 +176,7 @@
+ /* the array dimension is the number of default entries plus */
+ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
+ /* null entry */
+-static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
++static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
+       { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+       { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+       { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+@@ -185,11 +185,9 @@
+       { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+       { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+       { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
+-      { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
+-      { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ };
+-static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
++static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
+       { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
+       { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
+       { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
+@@ -197,7 +195,7 @@
+       { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
+ };
+-static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
++static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
+       { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+       { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+       { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+@@ -210,8 +208,6 @@
+       { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
+       { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+       { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
+-      { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
+-      { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+       { }
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/serial/ti_usb_3410_5052.h linux-2.6.29-rc3.owrt/drivers/usb/serial/ti_usb_3410_5052.h
+--- linux-2.6.29.owrt/drivers/usb/serial/ti_usb_3410_5052.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/serial/ti_usb_3410_5052.h        2009-05-10 23:48:29.000000000 +0200
+@@ -30,8 +30,6 @@
+ #define IBM_VENDOR_ID                 0x04b3
+ #define TI_3410_PRODUCT_ID            0x3410
+ #define IBM_4543_PRODUCT_ID           0x4543
+-#define IBM_454B_PRODUCT_ID           0x454b
+-#define IBM_454C_PRODUCT_ID           0x454c
+ #define TI_3410_EZ430_ID              0xF430  /* TI ez430 development tool */
+ #define TI_5052_BOOT_PRODUCT_ID               0x5052  /* no EEPROM, no firmware */
+ #define TI_5152_BOOT_PRODUCT_ID               0x5152  /* no EEPROM, no firmware */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/storage/scsiglue.c linux-2.6.29-rc3.owrt/drivers/usb/storage/scsiglue.c
+--- linux-2.6.29.owrt/drivers/usb/storage/scsiglue.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/storage/scsiglue.c       2009-05-10 23:48:29.000000000 +0200
+@@ -64,7 +64,6 @@
+  */
+ #define VENDOR_ID_NOKIA               0x0421
+ #define VENDOR_ID_NIKON               0x04b0
+-#define VENDOR_ID_PENTAX      0x0a17
+ #define VENDOR_ID_MOTOROLA    0x22b8
+ /***********************************************************************
+@@ -159,7 +158,6 @@
+               switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
+               case VENDOR_ID_NOKIA:
+               case VENDOR_ID_NIKON:
+-              case VENDOR_ID_PENTAX:
+               case VENDOR_ID_MOTOROLA:
+                       if (!(us->fflags & (US_FL_FIX_CAPACITY |
+                                       US_FL_CAPACITY_OK)))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/storage/transport.c linux-2.6.29-rc3.owrt/drivers/usb/storage/transport.c
+--- linux-2.6.29.owrt/drivers/usb/storage/transport.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/storage/transport.c      2009-05-10 23:48:29.000000000 +0200
+@@ -558,10 +558,32 @@
+       if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
+-              /* The command succeeded.  We know this device doesn't
+-               * have the last-sector bug, so stop checking it.
++              /* The command succeeded.  If the capacity is odd
++               * (i.e., if the sector number is even) then the
++               * "always-even" heuristic would be wrong for this
++               * device.  Issue a WARN() so that the kerneloops.org
++               * project will be notified and we will then know to
++               * mark the device with a CAPACITY_OK flag.  Hopefully
++               * this will occur for only a few devices.
++               *
++               * Use the sign of us->last_sector_hacks to tell whether
++               * the warning has already been issued; we don't need
++               * more than one warning per device.
+                */
+-              us->use_last_sector_hacks = 0;
++              if (!(sector & 1) && us->use_last_sector_hacks > 0) {
++                      unsigned vid = le16_to_cpu(
++                                      us->pusb_dev->descriptor.idVendor);
++                      unsigned pid = le16_to_cpu(
++                                      us->pusb_dev->descriptor.idProduct);
++                      unsigned rev = le16_to_cpu(
++                                      us->pusb_dev->descriptor.bcdDevice);
++
++                      WARN(1, "%s: Successful last sector success at %u, "
++                                      "device %04x:%04x:%04x\n",
++                                      sdkp->disk->disk_name, sector,
++                                      vid, pid, rev);
++                      us->use_last_sector_hacks = -1;
++              }
+       } else {
+               /* The command failed.  Allow up to 3 retries in case this
+@@ -577,6 +599,14 @@
+               srb->result = SAM_STAT_CHECK_CONDITION;
+               memcpy(srb->sense_buffer, record_not_found,
+                               sizeof(record_not_found));
++
++              /* In theory we might want to issue a WARN() here if the
++               * capacity is even, since it could indicate the device
++               * has the READ CAPACITY bug _and_ the real capacity is
++               * odd.  But it could also indicate that the device
++               * simply can't access its last sector, a failure mode
++               * which is surprisingly common.  So no warning.
++               */
+       }
+  done:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/storage/unusual_devs.h linux-2.6.29-rc3.owrt/drivers/usb/storage/unusual_devs.h
+--- linux-2.6.29.owrt/drivers/usb/storage/unusual_devs.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/storage/unusual_devs.h   2009-05-10 23:48:29.000000000 +0200
+@@ -226,7 +226,7 @@
+               US_FL_MAX_SECTORS_64 ),
+ /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+-UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
++UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+               "Nokia",
+               "Nokia 6233",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+@@ -907,13 +907,13 @@
+               "Genesys Logic",
+               "USB to IDE Optical",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+-              US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
++              US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
+               "Genesys Logic",
+               "USB to IDE Disk",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+-              US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
++              US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ /* Reported by Ben Efros <ben@pc-doctor.com> */
+ UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
+@@ -951,9 +951,7 @@
+               US_FL_FIX_CAPACITY ),
+ /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
+-/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+- * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+-UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
++UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
+               "Prolific Technology Inc.",
+               "Mass Storage Device",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+@@ -1216,7 +1214,7 @@
+               "Datafab",
+               "KECF-USB",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+-              US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
++              US_FL_FIX_INQUIRY ),
+ /* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+ UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+@@ -1356,6 +1354,21 @@
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_FIX_INQUIRY ),
++
++/* Submitted by Per Winkvist <per.winkvist@uk.com> */
++UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
++              "Pentax",
++              "Optio S/S4",
++              US_SC_DEVICE, US_PR_DEVICE, NULL,
++              US_FL_FIX_INQUIRY ),
++
++/* Reported by Jaak Ristioja <Ristioja@gmail.com> */
++UNUSUAL_DEV( 0x0a17, 0x006e, 0x0100, 0x0100,
++              "Pentax",
++              "K10D",
++              US_SC_DEVICE, US_PR_DEVICE, NULL,
++              US_FL_FIX_CAPACITY ),
++
+ /* These are virtual windows driver CDs, which the zd1211rw driver
+  * automatically converts into WLAN devices. */
+ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+@@ -1392,16 +1405,6 @@
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               0 ),
+-/* Reported by Jan Dumon <j.dumon@option.com>
+- * This device (wrongly) has a vendor-specific device descriptor.
+- * The entry is needed so usb-storage can bind to it's mass-storage
+- * interface as an interface driver */
+-UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
+-              "Option",
+-              "GI 0431 SD-Card",
+-              US_SC_DEVICE, US_PR_DEVICE, NULL,
+-              0 ),
+-
+ /* Reported by Ben Efros <ben@pc-doctor.com> */
+ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
+               "Seagate",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/wusbcore/devconnect.c linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/devconnect.c
+--- linux-2.6.29.owrt/drivers/usb/wusbcore/devconnect.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/devconnect.c    2009-05-10 23:48:29.000000000 +0200
+@@ -386,7 +386,6 @@
+                         | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
+       port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
+       if (wusb_dev) {
+-              dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx);
+               if (!list_empty(&wusb_dev->cack_node))
+                       list_del_init(&wusb_dev->cack_node);
+               /* For the one in cack_add() */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/wusbcore/rh.c linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/rh.c
+--- linux-2.6.29.owrt/drivers/usb/wusbcore/rh.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/rh.c    2009-05-10 23:48:29.000000000 +0200
+@@ -100,9 +100,6 @@
+       struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+       struct wusb_dev *wusb_dev = port->wusb_dev;
+-      if (wusb_dev == NULL)
+-              return -ENOTCONN;
+-
+       port->status |= USB_PORT_STAT_RESET;
+       port->change |= USB_PORT_STAT_C_RESET;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/usb/wusbcore/wa-xfer.c linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/wa-xfer.c
+--- linux-2.6.29.owrt/drivers/usb/wusbcore/wa-xfer.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/usb/wusbcore/wa-xfer.c       2009-05-10 23:48:29.000000000 +0200
+@@ -921,10 +921,8 @@
+       result = -ENODEV;
+       /* FIXME: segmentation broken -- kills DWA */
+       mutex_lock(&wusbhc->mutex);             /* get a WUSB dev */
+-      if (urb->dev == NULL) {
+-              mutex_unlock(&wusbhc->mutex);
++      if (urb->dev == NULL)
+               goto error_dev_gone;
+-      }
+       wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
+       if (wusb_dev == NULL) {
+               mutex_unlock(&wusbhc->mutex);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/uwb/allocator.c linux-2.6.29-rc3.owrt/drivers/uwb/allocator.c
+--- linux-2.6.29.owrt/drivers/uwb/allocator.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/uwb/allocator.c      2009-05-10 23:48:29.000000000 +0200
+@@ -15,6 +15,7 @@
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
++#include <linux/version.h>
+ #include <linux/kernel.h>
+ #include <linux/uwb.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/uwb/drp.c linux-2.6.29-rc3.owrt/drivers/uwb/drp.c
+--- linux-2.6.29.owrt/drivers/uwb/drp.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/uwb/drp.c    2009-05-10 23:48:29.000000000 +0200
+@@ -66,14 +66,14 @@
+       } else
+               dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
+-      spin_lock_bh(&rc->rsvs_lock);
++      spin_lock(&rc->rsvs_lock);
+       if (rc->set_drp_ie_pending > 1) {
+               rc->set_drp_ie_pending = 0;
+               uwb_rsv_queue_update(rc);       
+       } else {
+               rc->set_drp_ie_pending = 0;     
+       }
+-      spin_unlock_bh(&rc->rsvs_lock);
++      spin_unlock(&rc->rsvs_lock);
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/uwb/rsv.c linux-2.6.29-rc3.owrt/drivers/uwb/rsv.c
+--- linux-2.6.29.owrt/drivers/uwb/rsv.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/uwb/rsv.c    2009-05-10 23:48:29.000000000 +0200
+@@ -114,8 +114,7 @@
+               devaddr = rsv->target.devaddr;
+       uwb_dev_addr_print(target, sizeof(target), &devaddr);
+-      dev_dbg(dev, "rsv %s %s -> %s: %s\n",
+-              text, owner, target, uwb_rsv_state_str(rsv->state));
++      dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state));
+ }
+ static void uwb_rsv_release(struct kref *kref)
+@@ -512,7 +511,8 @@
+       if (uwb_rsv_is_owner(rsv))
+               uwb_rsv_put_stream(rsv);
+-
++      
++      del_timer_sync(&rsv->timer);
+       uwb_dev_put(rsv->owner);
+       if (rsv->target.type == UWB_RSV_TARGET_DEV)
+               uwb_dev_put(rsv->target.dev);
+@@ -870,7 +870,7 @@
+  */
+ void uwb_rsv_sched_update(struct uwb_rc *rc)
+ {
+-      spin_lock_bh(&rc->rsvs_lock);
++      spin_lock(&rc->rsvs_lock);
+       if (!delayed_work_pending(&rc->rsv_update_work)) {
+               if (rc->set_drp_ie_pending > 0) {
+                       rc->set_drp_ie_pending++;
+@@ -879,7 +879,7 @@
+               uwb_rsv_queue_update(rc);
+       }
+ unlock:
+-      spin_unlock_bh(&rc->rsvs_lock);
++      spin_unlock(&rc->rsvs_lock);
+ }
+ /*
+@@ -943,22 +943,13 @@
+       mutex_lock(&rc->rsvs_mutex);
+       list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+-              if (rsv->state != UWB_RSV_STATE_NONE)
+-                      uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+-              del_timer_sync(&rsv->timer);
++              uwb_rsv_remove(rsv);
+       }
+       /* Cancel any postponed update. */
+       rc->set_drp_ie_pending = 0;
+       mutex_unlock(&rc->rsvs_mutex);
+       cancel_delayed_work_sync(&rc->rsv_update_work);
+-      flush_workqueue(rc->rsv_workq);
+-
+-      mutex_lock(&rc->rsvs_mutex);
+-      list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+-              uwb_rsv_remove(rsv);
+-      }
+-      mutex_unlock(&rc->rsvs_mutex);
+ }
+ void uwb_rsv_init(struct uwb_rc *rc)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/atafb.c linux-2.6.29-rc3.owrt/drivers/video/atafb.c
+--- linux-2.6.29.owrt/drivers/video/atafb.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/atafb.c        2009-05-10 23:48:29.000000000 +0200
+@@ -841,7 +841,7 @@
+               tt_dmasnd.ctrl = DMASND_CTRL_OFF;
+               udelay(20);             /* wait a while for things to settle down */
+       }
+-      mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
++      mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+       tt_get_par(&par);
+       tt_encode_var(&atafb_predefined[0], &par);
+@@ -2035,7 +2035,7 @@
+               tt_dmasnd.ctrl = DMASND_CTRL_OFF;
+               udelay(20);             /* wait a while for things to settle down */
+       }
+-      mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
++      mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+       stste_get_par(&par);
+       stste_encode_var(&atafb_predefined[0], &par);
+@@ -2086,20 +2086,20 @@
+               return;
+       local_irq_save(flags);
+-      st_mfp.tim_ct_b = 0x10;
+-      st_mfp.active_edge |= 8;
+-      st_mfp.tim_ct_b = 0;
+-      st_mfp.tim_dt_b = 0xf0;
+-      st_mfp.tim_ct_b = 8;
+-      while (st_mfp.tim_dt_b > 1)     /* TOS does it this way, don't ask why */
++      mfp.tim_ct_b = 0x10;
++      mfp.active_edge |= 8;
++      mfp.tim_ct_b = 0;
++      mfp.tim_dt_b = 0xf0;
++      mfp.tim_ct_b = 8;
++      while (mfp.tim_dt_b > 1)        /* TOS does it this way, don't ask why */
+               ;
+-      new = st_mfp.tim_dt_b;
++      new = mfp.tim_dt_b;
+       do {
+               udelay(LINE_DELAY);
+               old = new;
+-              new = st_mfp.tim_dt_b;
++              new = mfp.tim_dt_b;
+       } while (old != new);
+-      st_mfp.tim_ct_b = 0x10;
++      mfp.tim_ct_b = 0x10;
+       udelay(SYNC_DELAY);
+       if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/aty128fb.c linux-2.6.29-rc3.owrt/drivers/video/aty/aty128fb.c
+--- linux-2.6.29.owrt/drivers/video/aty/aty128fb.c     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/aty128fb.c 2009-05-10 23:48:29.000000000 +0200
+@@ -1475,7 +1475,7 @@
+       aty128_set_pll(&par->pll, par);
+       aty128_set_fifo(&par->fifo_reg, par);
+-      config = aty_ld_le32(CNFG_CNTL) & ~3;
++      config = aty_ld_le32(CONFIG_CNTL) & ~3;
+ #if defined(__BIG_ENDIAN)
+       if (par->crtc.bpp == 32)
+@@ -1484,7 +1484,7 @@
+               config |= 1;    /* make aperture do 16 bit swapping */
+ #endif
+-      aty_st_le32(CNFG_CNTL, config);
++      aty_st_le32(CONFIG_CNTL, config);
+       aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
+       info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
+@@ -1853,14 +1853,13 @@
+  *  Initialisation
+  */
+-#ifdef CONFIG_PPC_PMAC__disabled
++#ifdef CONFIG_PPC_PMAC
+ static void aty128_early_resume(void *data)
+ {
+         struct aty128fb_par *par = data;
+       if (try_acquire_console_sem())
+               return;
+-      pci_restore_state(par->pdev);
+       aty128_do_resume(par->pdev);
+       release_console_sem();
+ }
+@@ -1876,7 +1875,7 @@
+       u32 dac;
+       /* Get the chip revision */
+-      chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
++      chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+       strcpy(video_card, "Rage128 XX ");
+       video_card[8] = ent->device >> 8;
+@@ -1908,14 +1907,7 @@
+               /* Indicate sleep capability */
+               if (par->chip_gen == rage_M3) {
+                       pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+-#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+-       * others we now rely on the PCI core restoring the config space for us, which
+-       * isn't the case with that hack, and that code path causes various things to
+-       * be called with interrupts off while they shouldn't. I'm leaving the code in
+-       * as it can be useful for debugging purposes
+-       */
+                       pmac_set_early_video_resume(aty128_early_resume, par);
+-#endif
+               }
+               /* Find default mode */
+@@ -2065,7 +2057,7 @@
+       /* Grab memory size from the card */
+       // How does this relate to the resource length from the PCI hardware?
+-      par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
++      par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+       /* Virtualize the framebuffer */
+       info->screen_base = ioremap(fb_addr, par->vram_size);
+@@ -2373,6 +2365,7 @@
+ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
+ {
+       u32     pmgt;
++      u16     pwr_command;
+       struct pci_dev *pdev = par->pdev;
+       if (!par->pm_reg)
+@@ -2381,8 +2374,6 @@
+       /* Set the chip into the appropriate suspend mode (we use D2,
+        * D3 would require a complete re-initialisation of the chip,
+        * including PCI config registers, clocks, AGP configuration, ...)
+-       *
+-       * For resume, the core will have already brought us back to D0
+        */
+       if (suspend) {
+               /* Make sure CRTC2 is reset. Remove that the day we decide to
+@@ -2400,9 +2391,17 @@
+               aty_st_le32(BUS_CNTL1, 0x00000010);
+               aty_st_le32(MEM_POWER_MISC, 0x0c830000);
+               mdelay(100);
+-
++              pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+               /* Switch PCI power management to D2 */
+-              pci_set_power_state(pdev, PCI_D2);
++              pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
++                      (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
++              pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
++      } else {
++              /* Switch back PCI power management to D0 */
++              mdelay(100);
++              pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
++              pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
++              mdelay(100);
+       }
+ }
+@@ -2411,12 +2410,6 @@
+       struct fb_info *info = pci_get_drvdata(pdev);
+       struct aty128fb_par *par = info->par;
+-      /* Because we may change PCI D state ourselves, we need to
+-       * first save the config space content so the core can
+-       * restore it properly on resume.
+-       */
+-      pci_save_state(pdev);
+-
+       /* We don't do anything but D2, for now we return 0, but
+        * we may want to change that. How do we know if the BIOS
+        * can properly take care of D3 ? Also, with swsusp, we
+@@ -2483,11 +2476,6 @@
+       if (pdev->dev.power.power_state.event == PM_EVENT_ON)
+               return 0;
+-      /* PCI state will have been restored by the core, so
+-       * we should be in D0 now with our config space fully
+-       * restored
+-       */
+-
+       /* Wakeup chip */
+       aty128_set_suspend(par, 0);
+       par->asleep = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/atyfb_base.c linux-2.6.29-rc3.owrt/drivers/video/aty/atyfb_base.c
+--- linux-2.6.29.owrt/drivers/video/aty/atyfb_base.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/atyfb_base.c       2009-05-10 23:48:29.000000000 +0200
+@@ -135,7 +135,7 @@
+ #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \
+ defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT)
+ static const u32 lt_lcd_regs[] = {
+-      CNFG_PANEL_LG,
++      CONFIG_PANEL_LG,
+       LCD_GEN_CNTL_LG,
+       DSTN_CONTROL_LG,
+       HFB_PITCH_ADDR_LG,
+@@ -446,7 +446,7 @@
+       par->pll_limits.ecp_max = aty_chips[i].ecp_max;
+       par->features = aty_chips[i].features;
+-      chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
++      chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+       type = chip_id & CFG_CHIP_TYPE;
+       rev = (chip_id & CFG_CHIP_REV) >> 24;
+@@ -629,7 +629,7 @@
+                   crtc->lcd_index = aty_ld_le32(LCD_INDEX, par);
+                   aty_st_le32(LCD_INDEX, crtc->lcd_index, par);
+               }
+-              crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par);
++              crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par);
+               crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par);
+@@ -676,7 +676,7 @@
+               aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par);
+               /* update non-shadow registers first */
+-              aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par);
++              aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par);
+               aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl &
+                       ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par);
+@@ -858,7 +858,7 @@
+               if (!M64_HAS(MOBIL_BUS))
+                       crtc->lcd_index |= CRTC2_DISPLAY_DIS;
+-              crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000;
++              crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000;
+               crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT;
+               crtc->lcd_gen_cntl &=
+@@ -1978,7 +1978,7 @@
+       return timeout ? 0 : -EIO;
+ }
+-#endif /* CONFIG_PPC_PMAC */
++#endif
+ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+ {
+@@ -2002,15 +2002,9 @@
+       par->asleep = 1;
+       par->lock_blank = 1;
+-      /* Because we may change PCI D state ourselves, we need to
+-       * first save the config space content so the core can
+-       * restore it properly on resume.
+-       */
+-      pci_save_state(pdev);
+-
+ #ifdef CONFIG_PPC_PMAC
+       /* Set chip to "suspend" mode */
+-      if (machine_is(powermac) && aty_power_mgmt(1, par)) {
++      if (aty_power_mgmt(1, par)) {
+               par->asleep = 0;
+               par->lock_blank = 0;
+               atyfb_blank(FB_BLANK_UNBLANK, info);
+@@ -2053,15 +2047,11 @@
+       acquire_console_sem();
+-      /* PCI state will have been restored by the core, so
+-       * we should be in D0 now with our config space fully
+-       * restored
+-       */
+-
+ #ifdef CONFIG_PPC_PMAC
+-      if (machine_is(powermac) &&
+-          pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
++      if (pdev->dev.power.power_state.event == 2)
+               aty_power_mgmt(0, par);
++#else
++      pci_set_power_state(pdev, PCI_D0);
+ #endif
+       aty_resume_chip(info);
+@@ -2264,7 +2254,7 @@
+       if (!M64_HAS(INTEGRATED)) {
+               u32 stat0;
+               u8 dac_type, dac_subtype, clk_type;
+-              stat0 = aty_ld_le32(CNFG_STAT0, par);
++              stat0 = aty_ld_le32(CONFIG_STAT0, par);
+               par->bus_type = (stat0 >> 0) & 0x07;
+               par->ram_type = (stat0 >> 3) & 0x07;
+               ramname = aty_gx_ram[par->ram_type];
+@@ -2334,7 +2324,7 @@
+               par->dac_ops = &aty_dac_ct;
+               par->pll_ops = &aty_pll_ct;
+               par->bus_type = PCI;
+-              par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
++              par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
+               ramname = aty_ct_ram[par->ram_type];
+               /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
+               if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
+@@ -2443,7 +2433,7 @@
+               }
+       if (M64_HAS(MAGIC_VRAM_SIZE)) {
+-              if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000)
++              if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000)
+                       info->fix.smem_len += 0x400000;
+       }
+@@ -2956,7 +2946,7 @@
+                * Fix PROMs idea of MEM_CNTL settings...
+                */
+               mem = aty_ld_le32(MEM_CNTL, par);
+-              chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
++              chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+               if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) {
+                       switch (mem & 0x0f) {
+                       case 3:
+@@ -2974,7 +2964,7 @@
+                       default:
+                               break;
+                       }
+-                      if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM)
++                      if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM)
+                               mem &= ~(0x00700000);
+               }
+               mem &= ~(0xcf80e000);   /* Turn off all undocumented bits. */
+@@ -3582,7 +3572,7 @@
+               }
+               /* Fake pci_id for correct_chipset() */
+-              switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) {
++              switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+               case 0x00d7:
+                       par->pci_id = PCI_CHIP_MACH64GX;
+                       break;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/mach64_ct.c linux-2.6.29-rc3.owrt/drivers/video/aty/mach64_ct.c
+--- linux-2.6.29.owrt/drivers/video/aty/mach64_ct.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/mach64_ct.c        2009-05-10 23:48:29.000000000 +0200
+@@ -8,9 +8,6 @@
+ #include <asm/io.h>
+ #include <video/mach64.h>
+ #include "atyfb.h"
+-#ifdef CONFIG_PPC
+-#include <asm/machdep.h>
+-#endif
+ #undef DEBUG
+@@ -539,14 +536,6 @@
+       pll->ct.xclk_post_div_real = postdividers[xpost_div];
+       pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
+-#ifdef CONFIG_PPC
+-      if (machine_is(powermac)) {
+-              /* Override PLL_EXT_CNTL & 0x07. */
+-              pll->ct.xclk_post_div = xpost_div;
+-              pll->ct.xclk_ref_div = 1;
+-      }
+-#endif
+-
+ #ifdef DEBUG
+       pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) /
+                       (par->ref_clk_per * pll->ct.pll_ref_div);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/radeon_base.c linux-2.6.29-rc3.owrt/drivers/video/aty/radeon_base.c
+--- linux-2.6.29.owrt/drivers/video/aty/radeon_base.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/radeon_base.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1936,8 +1936,8 @@
+       OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B);
+       mdelay(100);
+-      aper_base = INREG(CNFG_APER_0_BASE);
+-      aper_size = INREG(CNFG_APER_SIZE);
++      aper_base = INREG(CONFIG_APER_0_BASE);
++      aper_size = INREG(CONFIG_APER_SIZE);
+ #ifdef SET_MC_FB_FROM_APERTURE
+       /* Set framebuffer to be at the same address as set in PCI BAR */
+@@ -2024,11 +2024,11 @@
+                      ~CRTC_H_CUTOFF_ACTIVE_EN);
+           }
+         } else {
+-          tmp = INREG(CNFG_MEMSIZE);
++          tmp = INREG(CONFIG_MEMSIZE);
+         }
+       /* mem size is bits [28:0], mask off the rest */
+-      rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK;
++      rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
+       /*
+        * Hack to get around some busted production M6's
+@@ -2228,7 +2228,7 @@
+        */
+       rinfo->errata = 0;
+       if (rinfo->family == CHIP_FAMILY_R300 &&
+-          (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK)
++          (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK)
+           == CFG_ATI_REV_A11)
+               rinfo->errata |= CHIP_ERRATA_R300_CG;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/radeonfb.h linux-2.6.29-rc3.owrt/drivers/video/aty/radeonfb.h
+--- linux-2.6.29.owrt/drivers/video/aty/radeonfb.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/radeonfb.h 2009-05-10 23:48:29.000000000 +0200
+@@ -361,6 +361,8 @@
+ #ifdef CONFIG_FB_RADEON_I2C
+       struct radeon_i2c_chan  i2c[4];
+ #endif
++
++      u32                     cfg_save[64];
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/aty/radeon_pm.c linux-2.6.29-rc3.owrt/drivers/video/aty/radeon_pm.c
+--- linux-2.6.29.owrt/drivers/video/aty/radeon_pm.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/aty/radeon_pm.c        2009-05-10 23:48:29.000000000 +0200
+@@ -333,7 +333,7 @@
+       if (!rinfo->has_CRTC2) {
+                 tmp = INPLL(pllSCLK_CNTL);
+-              if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
++              if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
+                     tmp &= ~(SCLK_CNTL__FORCE_CP      | SCLK_CNTL__FORCE_RB);
+                 tmp &= ~(SCLK_CNTL__FORCE_HDP         | SCLK_CNTL__FORCE_DISP1 |
+                        SCLK_CNTL__FORCE_TOP           | SCLK_CNTL__FORCE_SE   |
+@@ -468,9 +468,9 @@
+       /*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/
+       if ((rinfo->family == CHIP_FAMILY_RV250 &&
+-           ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
++           ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
+           ((rinfo->family == CHIP_FAMILY_RV100) &&
+-           ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
++           ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
+               tmp |= SCLK_CNTL__FORCE_CP;
+               tmp |= SCLK_CNTL__FORCE_VIP;
+       }
+@@ -486,7 +486,7 @@
+               /* RV200::A11 A12 RV250::A11 A12 */
+               if (((rinfo->family == CHIP_FAMILY_RV200) ||
+                    (rinfo->family == CHIP_FAMILY_RV250)) &&
+-                  ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
++                  ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
+                       tmp |= SCLK_MORE_CNTL__FORCEON;
+               OUTPLL(pllSCLK_MORE_CNTL, tmp);
+@@ -497,7 +497,7 @@
+       /* RV200::A11 A12, RV250::A11 A12 */
+       if (((rinfo->family == CHIP_FAMILY_RV200) ||
+            (rinfo->family == CHIP_FAMILY_RV250)) &&
+-          ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
++          ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
+               tmp = INPLL(pllPLL_PWRMGT_CNTL);
+               tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE;
+               OUTPLL(pllPLL_PWRMGT_CNTL, tmp);
+@@ -702,7 +702,7 @@
+       OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
+       OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
+       OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
+-      OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
++      OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+       OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
+       OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
+@@ -1723,7 +1723,7 @@
+       OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
+       OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
+       OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
+-      OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
++      OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+       OUTREG(BUS_CNTL, rinfo->save_regs[36]);
+       OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
+       OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
+@@ -1961,7 +1961,7 @@
+       OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/);
+       OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/);
+       OUTREG(MC_IND_INDEX, 0);
+-      OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
++      OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+       mdelay(20);
+ }
+@@ -2361,7 +2361,7 @@
+       OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249);
+       OUTREG(MC_IND_INDEX, 0);
+-      OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
++      OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+       radeon_pm_full_reset_sdram(rinfo);
+@@ -2507,28 +2507,11 @@
+ #endif /* CONFIG_PPC_OF */
+-static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t state)
+-{
+-      u16 pwr_cmd;
+-
+-      for (;;) {
+-              pci_read_config_word(rinfo->pdev,
+-                                   rinfo->pm_reg+PCI_PM_CTRL,
+-                                   &pwr_cmd);
+-              if (pwr_cmd & 2)
+-                      break;
+-              pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
+-              pci_write_config_word(rinfo->pdev,
+-                                    rinfo->pm_reg+PCI_PM_CTRL,
+-                                    pwr_cmd);
+-              msleep(500);
+-      }
+-      rinfo->pdev->current_state = state;
+-}
+-
+ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
+ {
++      u16 pwr_cmd;
+       u32 tmp;
++      int i;
+       if (!rinfo->pm_reg)
+               return;
+@@ -2574,19 +2557,32 @@
+                       }
+               }
++              for (i = 0; i < 64; ++i)
++                      pci_read_config_dword(rinfo->pdev, i * 4,
++                                            &rinfo->cfg_save[i]);
++
+               /* Switch PCI power management to D2. */
+               pci_disable_device(rinfo->pdev);
+-              pci_save_state(rinfo->pdev);
+-              /* The chip seems to need us to whack the PM register
+-               * repeatedly until it sticks. We do that -prior- to
+-               * calling pci_set_power_state()
+-               */
+-              radeonfb_whack_power_state(rinfo, PCI_D2);
+-              pci_set_power_state(rinfo->pdev, PCI_D2);
++              for (;;) {
++                      pci_read_config_word(
++                              rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
++                              &pwr_cmd);
++                      if (pwr_cmd & 2)
++                              break;                  
++                      pci_write_config_word(
++                              rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
++                              (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
++                      mdelay(500);
++              }
+       } else {
+               printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
+                      pci_name(rinfo->pdev));
++              /* Switch back PCI powermanagment to D0 */
++              mdelay(200);
++              pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
++              mdelay(500);
++
+               if (rinfo->family <= CHIP_FAMILY_RV250) {
+                       /* Reset the SDRAM controller  */
+                       radeon_pm_full_reset_sdram(rinfo);
+@@ -2602,10 +2598,37 @@
+       }
+ }
++static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
++{
++      int i;
++      static u32 radeon_cfg_after_resume[64];
++
++      for (i = 0; i < 64; ++i)
++              pci_read_config_dword(rinfo->pdev, i * 4,
++                                    &radeon_cfg_after_resume[i]);
++
++      if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
++          == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
++              return 0;       /* assume everything is ok */
++
++      for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
++              if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
++                      pci_write_config_dword(rinfo->pdev, i * 4,
++                                             rinfo->cfg_save[i]);
++      }
++      pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
++                            rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
++      pci_write_config_word(rinfo->pdev, PCI_COMMAND,
++                            rinfo->cfg_save[PCI_COMMAND/4]);
++      return 1;
++}
++
++
+ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
+ {
+         struct fb_info *info = pci_get_drvdata(pdev);
+         struct radeonfb_info *rinfo = info->par;
++      int i;
+       if (mesg.event == pdev->dev.power.power_state.event)
+               return 0;
+@@ -2651,11 +2674,6 @@
+       pmac_suspend_agp_for_card(pdev);
+ #endif /* CONFIG_PPC_PMAC */
+-      /* It's unclear whether or when the generic code will do that, so let's
+-       * do it ourselves. We save state before we do any power management
+-       */
+-      pci_save_state(pdev);
+-
+       /* If we support wakeup from poweroff, we save all regs we can including cfg
+        * space
+        */
+@@ -2680,6 +2698,9 @@
+                       mdelay(20);
+                       OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
+               }
++              // FIXME: Use PCI layer
++              for (i = 0; i < 64; ++i)
++                      pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
+               pci_disable_device(pdev);
+       }
+       /* If we support D2, we go to it (should be fixed later with a flag forcing
+@@ -2696,13 +2717,6 @@
+       return 0;
+ }
+-static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+-{
+-      return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+-             rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+-             rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+-}
+-
+ int radeonfb_pci_resume(struct pci_dev *pdev)
+ {
+         struct fb_info *info = pci_get_drvdata(pdev);
+@@ -2721,13 +2735,20 @@
+       printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
+              pci_name(pdev), pdev->dev.power.power_state.event);
+-      /* PCI state will have been restored by the core, so
+-       * we should be in D0 now with our config space fully
+-       * restored
+-       */
++
++      if (pci_enable_device(pdev)) {
++              rc = -ENODEV;
++              printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
++                     pci_name(pdev));
++              goto bail;
++      }
++      pci_set_master(pdev);
++
+       if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+-              /* Wakeup chip */
+-              if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
++              /* Wakeup chip. Check from config space if we were powered off
++               * (todo: additionally, check CLK_PIN_CNTL too)
++               */
++              if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+                       if (rinfo->reinit_func != NULL)
+                               rinfo->reinit_func(rinfo);
+                       else {
+@@ -2786,13 +2807,12 @@
+       return rc;
+ }
+-#ifdef CONFIG_PPC_OF__disabled
++#ifdef CONFIG_PPC_OF
+ static void radeonfb_early_resume(void *data)
+ {
+         struct radeonfb_info *rinfo = data;
+       rinfo->no_schedule = 1;
+-      pci_restore_state(rinfo->pdev);
+       radeonfb_pci_resume(rinfo->pdev);
+       rinfo->no_schedule = 0;
+ }
+@@ -2859,14 +2879,7 @@
+                */
+               if (rinfo->pm_mode != radeon_pm_none) {
+                       pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+-#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+-       * others we now rely on the PCI core restoring the config space for us, which
+-       * isn't the case with that hack, and that code path causes various things to
+-       * be called with interrupts off while they shouldn't. I'm leaving the code in
+-       * as it can be useful for debugging purposes
+-       */
+                       pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+-#endif
+               }
+ #if 0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/backlight/da903x_bl.c linux-2.6.29-rc3.owrt/drivers/video/backlight/da903x_bl.c
+--- linux-2.6.29.owrt/drivers/video/backlight/da903x_bl.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/backlight/da903x_bl.c  1970-01-01 01:00:00.000000000 +0100
+@@ -1,203 +0,0 @@
+-/*
+- * Backlight driver for Dialog Semiconductor DA9030/DA9034
+- *
+- * Copyright (C) 2008 Compulab, Ltd.
+- *    Mike Rapoport <mike@compulab.co.il>
+- *
+- * Copyright (C) 2006-2008 Marvell International Ltd.
+- *    Eric Miao <eric.miao@marvell.com>
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/fb.h>
+-#include <linux/backlight.h>
+-#include <linux/mfd/da903x.h>
+-
+-#define DA9030_WLED_CONTROL   0x25
+-#define DA9030_WLED_CP_EN     (1 << 6)
+-#define DA9030_WLED_TRIM(x)   ((x) & 0x7)
+-
+-#define DA9034_WLED_CONTROL1  0x3C
+-#define DA9034_WLED_CONTROL2  0x3D
+-
+-#define DA9034_WLED_BOOST_EN  (1 << 5)
+-
+-#define DA9030_MAX_BRIGHTNESS 7
+-#define DA9034_MAX_BRIGHTNESS 0x7f
+-
+-struct da903x_backlight_data {
+-      struct device *da903x_dev;
+-      int id;
+-      int current_brightness;
+-};
+-
+-static int da903x_backlight_set(struct backlight_device *bl, int brightness)
+-{
+-      struct da903x_backlight_data *data = bl_get_data(bl);
+-      struct device *dev = data->da903x_dev;
+-      uint8_t val;
+-      int ret = 0;
+-
+-      switch (data->id) {
+-      case DA9034_ID_WLED:
+-              ret = da903x_update(dev, DA9034_WLED_CONTROL1,
+-                              brightness, 0x7f);
+-              if (ret)
+-                      return ret;
+-
+-              if (data->current_brightness && brightness == 0)
+-                      ret = da903x_clr_bits(dev,
+-                                      DA9034_WLED_CONTROL2,
+-                                      DA9034_WLED_BOOST_EN);
+-
+-              if (data->current_brightness == 0 && brightness)
+-                      ret = da903x_set_bits(dev,
+-                                      DA9034_WLED_CONTROL2,
+-                                      DA9034_WLED_BOOST_EN);
+-              break;
+-      case DA9030_ID_WLED:
+-              val = DA9030_WLED_TRIM(brightness);
+-              val |= brightness ? DA9030_WLED_CP_EN : 0;
+-              ret = da903x_write(dev, DA9030_WLED_CONTROL, val);
+-              break;
+-      }
+-
+-      if (ret)
+-              return ret;
+-
+-      data->current_brightness = brightness;
+-      return 0;
+-}
+-
+-static int da903x_backlight_update_status(struct backlight_device *bl)
+-{
+-      int brightness = bl->props.brightness;
+-
+-      if (bl->props.power != FB_BLANK_UNBLANK)
+-              brightness = 0;
+-
+-      if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+-              brightness = 0;
+-
+-      return da903x_backlight_set(bl, brightness);
+-}
+-
+-static int da903x_backlight_get_brightness(struct backlight_device *bl)
+-{
+-      struct da903x_backlight_data *data = bl_get_data(bl);
+-      return data->current_brightness;
+-}
+-
+-static struct backlight_ops da903x_backlight_ops = {
+-      .update_status  = da903x_backlight_update_status,
+-      .get_brightness = da903x_backlight_get_brightness,
+-};
+-
+-static int da903x_backlight_probe(struct platform_device *pdev)
+-{
+-      struct da903x_backlight_data *data;
+-      struct backlight_device *bl;
+-      int max_brightness;
+-
+-      data = kzalloc(sizeof(*data), GFP_KERNEL);
+-      if (data == NULL)
+-              return -ENOMEM;
+-
+-      switch (pdev->id) {
+-      case DA9030_ID_WLED:
+-              max_brightness = DA9030_MAX_BRIGHTNESS;
+-              break;
+-      case DA9034_ID_WLED:
+-              max_brightness = DA9034_MAX_BRIGHTNESS;
+-              break;
+-      default:
+-              dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
+-                              pdev->id);
+-              kfree(data);
+-              return -EINVAL;
+-      }
+-
+-      data->id = pdev->id;
+-      data->da903x_dev = pdev->dev.parent;
+-      data->current_brightness = 0;
+-
+-      bl = backlight_device_register(pdev->name, data->da903x_dev,
+-                      data, &da903x_backlight_ops);
+-      if (IS_ERR(bl)) {
+-              dev_err(&pdev->dev, "failed to register backlight\n");
+-              kfree(data);
+-              return PTR_ERR(bl);
+-      }
+-
+-      bl->props.max_brightness = max_brightness;
+-      bl->props.brightness = max_brightness;
+-
+-      platform_set_drvdata(pdev, bl);
+-      backlight_update_status(bl);
+-      return 0;
+-}
+-
+-static int da903x_backlight_remove(struct platform_device *pdev)
+-{
+-      struct backlight_device *bl = platform_get_drvdata(pdev);
+-      struct da903x_backlight_data *data = bl_get_data(bl);
+-
+-      backlight_device_unregister(bl);
+-      kfree(data);
+-      return 0;
+-}
+-
+-#ifdef CONFIG_PM
+-static int da903x_backlight_suspend(struct platform_device *pdev,
+-                               pm_message_t state)
+-{
+-      struct backlight_device *bl = platform_get_drvdata(pdev);
+-      return da903x_backlight_set(bl, 0);
+-}
+-
+-static int da903x_backlight_resume(struct platform_device *pdev)
+-{
+-      struct backlight_device *bl = platform_get_drvdata(pdev);
+-
+-      backlight_update_status(bl);
+-      return 0;
+-}
+-#else
+-#define da903x_backlight_suspend      NULL
+-#define da903x_backlight_resume               NULL
+-#endif
+-
+-static struct platform_driver da903x_backlight_driver = {
+-      .driver         = {
+-              .name   = "da903x-backlight",
+-              .owner  = THIS_MODULE,
+-      },
+-      .probe          = da903x_backlight_probe,
+-      .remove         = da903x_backlight_remove,
+-      .suspend        = da903x_backlight_suspend,
+-      .resume         = da903x_backlight_resume,
+-};
+-
+-static int __init da903x_backlight_init(void)
+-{
+-      return platform_driver_register(&da903x_backlight_driver);
+-}
+-module_init(da903x_backlight_init);
+-
+-static void __exit da903x_backlight_exit(void)
+-{
+-      platform_driver_unregister(&da903x_backlight_driver);
+-}
+-module_exit(da903x_backlight_exit);
+-
+-MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034");
+-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+-            "Mike Rapoport <mike@compulab.co.il>");
+-MODULE_LICENSE("GPL");
+-MODULE_ALIAS("platform:da903x-backlight");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/backlight/da903x.c linux-2.6.29-rc3.owrt/drivers/video/backlight/da903x.c
+--- linux-2.6.29.owrt/drivers/video/backlight/da903x.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt/drivers/video/backlight/da903x.c     2009-05-10 23:48:29.000000000 +0200
+@@ -0,0 +1,203 @@
++/*
++ * Backlight driver for Dialog Semiconductor DA9030/DA9034
++ *
++ * Copyright (C) 2008 Compulab, Ltd.
++ *    Mike Rapoport <mike@compulab.co.il>
++ *
++ * Copyright (C) 2006-2008 Marvell International Ltd.
++ *    Eric Miao <eric.miao@marvell.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++#include <linux/mfd/da903x.h>
++
++#define DA9030_WLED_CONTROL   0x25
++#define DA9030_WLED_CP_EN     (1 << 6)
++#define DA9030_WLED_TRIM(x)   ((x) & 0x7)
++
++#define DA9034_WLED_CONTROL1  0x3C
++#define DA9034_WLED_CONTROL2  0x3D
++
++#define DA9034_WLED_BOOST_EN  (1 << 5)
++
++#define DA9030_MAX_BRIGHTNESS 7
++#define DA9034_MAX_BRIGHTNESS 0x7f
++
++struct da903x_backlight_data {
++      struct device *da903x_dev;
++      int id;
++      int current_brightness;
++};
++
++static int da903x_backlight_set(struct backlight_device *bl, int brightness)
++{
++      struct da903x_backlight_data *data = bl_get_data(bl);
++      struct device *dev = data->da903x_dev;
++      uint8_t val;
++      int ret = 0;
++
++      switch (data->id) {
++      case DA9034_ID_WLED:
++              ret = da903x_update(dev, DA9034_WLED_CONTROL1,
++                              brightness, 0x7f);
++              if (ret)
++                      return ret;
++
++              if (data->current_brightness && brightness == 0)
++                      ret = da903x_clr_bits(dev,
++                                      DA9034_WLED_CONTROL2,
++                                      DA9034_WLED_BOOST_EN);
++
++              if (data->current_brightness == 0 && brightness)
++                      ret = da903x_set_bits(dev,
++                                      DA9034_WLED_CONTROL2,
++                                      DA9034_WLED_BOOST_EN);
++              break;
++      case DA9030_ID_WLED:
++              val = DA9030_WLED_TRIM(brightness);
++              val |= brightness ? DA9030_WLED_CP_EN : 0;
++              ret = da903x_write(dev, DA9030_WLED_CONTROL, val);
++              break;
++      }
++
++      if (ret)
++              return ret;
++
++      data->current_brightness = brightness;
++      return 0;
++}
++
++static int da903x_backlight_update_status(struct backlight_device *bl)
++{
++      int brightness = bl->props.brightness;
++
++      if (bl->props.power != FB_BLANK_UNBLANK)
++              brightness = 0;
++
++      if (bl->props.fb_blank != FB_BLANK_UNBLANK)
++              brightness = 0;
++
++      return da903x_backlight_set(bl, brightness);
++}
++
++static int da903x_backlight_get_brightness(struct backlight_device *bl)
++{
++      struct da903x_backlight_data *data = bl_get_data(bl);
++      return data->current_brightness;
++}
++
++static struct backlight_ops da903x_backlight_ops = {
++      .update_status  = da903x_backlight_update_status,
++      .get_brightness = da903x_backlight_get_brightness,
++};
++
++static int da903x_backlight_probe(struct platform_device *pdev)
++{
++      struct da903x_backlight_data *data;
++      struct backlight_device *bl;
++      int max_brightness;
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (data == NULL)
++              return -ENOMEM;
++
++      switch (pdev->id) {
++      case DA9030_ID_WLED:
++              max_brightness = DA9030_MAX_BRIGHTNESS;
++              break;
++      case DA9034_ID_WLED:
++              max_brightness = DA9034_MAX_BRIGHTNESS;
++              break;
++      default:
++              dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
++                              pdev->id);
++              kfree(data);
++              return -EINVAL;
++      }
++
++      data->id = pdev->id;
++      data->da903x_dev = pdev->dev.parent;
++      data->current_brightness = 0;
++
++      bl = backlight_device_register(pdev->name, data->da903x_dev,
++                      data, &da903x_backlight_ops);
++      if (IS_ERR(bl)) {
++              dev_err(&pdev->dev, "failed to register backlight\n");
++              kfree(data);
++              return PTR_ERR(bl);
++      }
++
++      bl->props.max_brightness = max_brightness;
++      bl->props.brightness = max_brightness;
++
++      platform_set_drvdata(pdev, bl);
++      backlight_update_status(bl);
++      return 0;
++}
++
++static int da903x_backlight_remove(struct platform_device *pdev)
++{
++      struct backlight_device *bl = platform_get_drvdata(pdev);
++      struct da903x_backlight_data *data = bl_get_data(bl);
++
++      backlight_device_unregister(bl);
++      kfree(data);
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int da903x_backlight_suspend(struct platform_device *pdev,
++                               pm_message_t state)
++{
++      struct backlight_device *bl = platform_get_drvdata(pdev);
++      return da903x_backlight_set(bl, 0);
++}
++
++static int da903x_backlight_resume(struct platform_device *pdev)
++{
++      struct backlight_device *bl = platform_get_drvdata(pdev);
++
++      backlight_update_status(bl);
++      return 0;
++}
++#else
++#define da903x_backlight_suspend      NULL
++#define da903x_backlight_resume               NULL
++#endif
++
++static struct platform_driver da903x_backlight_driver = {
++      .driver         = {
++              .name   = "da903x-backlight",
++              .owner  = THIS_MODULE,
++      },
++      .probe          = da903x_backlight_probe,
++      .remove         = da903x_backlight_remove,
++      .suspend        = da903x_backlight_suspend,
++      .resume         = da903x_backlight_resume,
++};
++
++static int __init da903x_backlight_init(void)
++{
++      return platform_driver_register(&da903x_backlight_driver);
++}
++module_init(da903x_backlight_init);
++
++static void __exit da903x_backlight_exit(void)
++{
++      platform_driver_unregister(&da903x_backlight_driver);
++}
++module_exit(da903x_backlight_exit);
++
++MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034");
++MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
++            "Mike Rapoport <mike@compulab.co.il>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:da903x-backlight");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/backlight/Makefile linux-2.6.29-rc3.owrt/drivers/video/backlight/Makefile
+--- linux-2.6.29.owrt/drivers/video/backlight/Makefile 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/backlight/Makefile     2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,7 @@
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+ obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+ obj-$(CONFIG_BACKLIGHT_PWM)   += pwm_bl.o
+-obj-$(CONFIG_BACKLIGHT_DA903X)        += da903x_bl.o
++obj-$(CONFIG_BACKLIGHT_DA903X)        += da903x.o
+ obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+ obj-$(CONFIG_BACKLIGHT_TOSA)  += tosa_bl.o
+ obj-$(CONFIG_BACKLIGHT_SAHARA)        += kb3886_bl.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/bfin-t350mcqb-fb.c linux-2.6.29-rc3.owrt/drivers/video/bfin-t350mcqb-fb.c
+--- linux-2.6.29.owrt/drivers/video/bfin-t350mcqb-fb.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/bfin-t350mcqb-fb.c     2009-05-10 23:48:29.000000000 +0200
+@@ -447,7 +447,7 @@
+       return IRQ_HANDLED;
+ }
+-static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
++static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
+ {
+       struct bfin_t350mcqbfb_info *info;
+       struct fb_info *fbinfo;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/fbcmap.c linux-2.6.29-rc3.owrt/drivers/video/fbcmap.c
+--- linux-2.6.29.owrt/drivers/video/fbcmap.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/fbcmap.c       2009-05-10 23:48:29.000000000 +0200
+@@ -250,6 +250,10 @@
+       int rc, size = cmap->len * sizeof(u16);
+       struct fb_cmap umap;
++      if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
++                              !info->fbops->fb_setcmap))
++              return -EINVAL;
++
+       memset(&umap, 0, sizeof(struct fb_cmap));
+       rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
+       if (rc)
+@@ -258,23 +262,11 @@
+           copy_from_user(umap.green, cmap->green, size) ||
+           copy_from_user(umap.blue, cmap->blue, size) ||
+           (cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) {
+-              rc = -EFAULT;
+-              goto out;
++              fb_dealloc_cmap(&umap);
++              return -EFAULT;
+       }
+       umap.start = cmap->start;
+-      if (!lock_fb_info(info)) {
+-              rc = -ENODEV;
+-              goto out;
+-      }
+-      if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
+-                              !info->fbops->fb_setcmap)) {
+-              rc = -EINVAL;
+-              goto out1;
+-      }
+       rc = fb_set_cmap(&umap, info);
+-out1:
+-      unlock_fb_info(info);
+-out:
+       fb_dealloc_cmap(&umap);
+       return rc;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/fbmem.c linux-2.6.29-rc3.owrt/drivers/video/fbmem.c
+--- linux-2.6.29.owrt/drivers/video/fbmem.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/fbmem.c        2009-05-10 23:48:29.000000000 +0200
+@@ -1013,139 +1013,132 @@
+       struct fb_var_screeninfo var;
+       struct fb_fix_screeninfo fix;
+       struct fb_con2fbmap con2fb;
+-      struct fb_cmap cmap_from;
+       struct fb_cmap_user cmap;
+       struct fb_event event;
+       void __user *argp = (void __user *)arg;
+       long ret = 0;
++      fb = info->fbops;
++      if (!fb)
++              return -ENODEV;
++
+       switch (cmd) {
+       case FBIOGET_VSCREENINFO:
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+-              var = info->var;
+-              unlock_fb_info(info);
+-
+-              ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0;
++              ret = copy_to_user(argp, &info->var,
++                                  sizeof(var)) ? -EFAULT : 0;
+               break;
+       case FBIOPUT_VSCREENINFO:
+-              if (copy_from_user(&var, argp, sizeof(var)))
+-                      return -EFAULT;
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
++              if (copy_from_user(&var, argp, sizeof(var))) {
++                      ret =  -EFAULT;
++                      break;
++              }
+               acquire_console_sem();
+               info->flags |= FBINFO_MISC_USEREVENT;
+               ret = fb_set_var(info, &var);
+               info->flags &= ~FBINFO_MISC_USEREVENT;
+               release_console_sem();
+-              unlock_fb_info(info);
+-              if (!ret && copy_to_user(argp, &var, sizeof(var)))
++              if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
+                       ret = -EFAULT;
+               break;
+       case FBIOGET_FSCREENINFO:
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+-              fix = info->fix;
+-              unlock_fb_info(info);
+-
+-              ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0;
++              ret = copy_to_user(argp, &info->fix,
++                                  sizeof(fix)) ? -EFAULT : 0;
+               break;
+       case FBIOPUTCMAP:
+               if (copy_from_user(&cmap, argp, sizeof(cmap)))
+-                      return -EFAULT;
+-              ret = fb_set_user_cmap(&cmap, info);
++                      ret = -EFAULT;
++              else
++                      ret = fb_set_user_cmap(&cmap, info);
+               break;
+       case FBIOGETCMAP:
+               if (copy_from_user(&cmap, argp, sizeof(cmap)))
+-                      return -EFAULT;
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+-              cmap_from = info->cmap;
+-              unlock_fb_info(info);
+-              ret = fb_cmap_to_user(&cmap_from, &cmap);
++                      ret = -EFAULT;
++              else
++                      ret = fb_cmap_to_user(&info->cmap, &cmap);
+               break;
+       case FBIOPAN_DISPLAY:
+-              if (copy_from_user(&var, argp, sizeof(var)))
+-                      return -EFAULT;
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
++              if (copy_from_user(&var, argp, sizeof(var))) {
++                      ret = -EFAULT;
++                      break;
++              }
+               acquire_console_sem();
+               ret = fb_pan_display(info, &var);
+               release_console_sem();
+-              unlock_fb_info(info);
+               if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
+-                      return -EFAULT;
++                      ret = -EFAULT;
+               break;
+       case FBIO_CURSOR:
+               ret = -EINVAL;
+               break;
+       case FBIOGET_CON2FBMAP:
+               if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
+-                      return -EFAULT;
+-              if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+-                      return -EINVAL;
+-              con2fb.framebuffer = -1;
+-              event.data = &con2fb;
+-
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+-              event.info = info;
+-              fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+-              unlock_fb_info(info);
+-
+-              ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
++                      ret = -EFAULT;
++              else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
++                      ret = -EINVAL;
++              else {
++                      con2fb.framebuffer = -1;
++                      event.info = info;
++                      event.data = &con2fb;
++                      fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP,
++                                                              &event);
++                      ret = copy_to_user(argp, &con2fb,
++                                  sizeof(con2fb)) ? -EFAULT : 0;
++              }
+               break;
+       case FBIOPUT_CON2FBMAP:
+-              if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
+-                      return -EFAULT;
+-              if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+-                      return -EINVAL;
+-              if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX)
+-                      return -EINVAL;
++              if (copy_from_user(&con2fb, argp, sizeof(con2fb))) {
++                      ret = -EFAULT;
++                      break;
++              }
++              if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) {
++                      ret = -EINVAL;
++                      break;
++              }
++              if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) {
++                      ret = -EINVAL;
++                      break;
++              }
+               if (!registered_fb[con2fb.framebuffer])
+                       request_module("fb%d", con2fb.framebuffer);
+               if (!registered_fb[con2fb.framebuffer]) {
+                       ret = -EINVAL;
+                       break;
+               }
+-              event.data = &con2fb;
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+               event.info = info;
++              event.data = &con2fb;
+               ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP,
+                                             &event);
+-              unlock_fb_info(info);
+               break;
+       case FBIOBLANK:
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+               acquire_console_sem();
+               info->flags |= FBINFO_MISC_USEREVENT;
+               ret = fb_blank(info, arg);
+               info->flags &= ~FBINFO_MISC_USEREVENT;
+               release_console_sem();
+-              unlock_fb_info(info);
+-              break;
++              break;;
+       default:
+-              if (!lock_fb_info(info))
+-                      return -ENODEV;
+-              fb = info->fbops;
+-              if (fb->fb_ioctl)
+-                      ret = fb->fb_ioctl(info, cmd, arg);
+-              else
++              if (fb->fb_ioctl == NULL)
+                       ret = -ENOTTY;
+-              unlock_fb_info(info);
++              else
++                      ret = fb->fb_ioctl(info, cmd, arg);
+       }
+       return ret;
+ }
+ static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++__acquires(&info->lock)
++__releases(&info->lock)
+ {
+       struct inode *inode = file->f_path.dentry->d_inode;
+       int fbidx = iminor(inode);
+-      struct fb_info *info = registered_fb[fbidx];
++      struct fb_info *info;
++      long ret;
+-      return do_fb_ioctl(info, cmd, arg);
++      info = registered_fb[fbidx];
++      mutex_lock(&info->lock);
++      ret = do_fb_ioctl(info, cmd, arg);
++      mutex_unlock(&info->lock);
++      return ret;
+ }
+ #ifdef CONFIG_COMPAT
+@@ -1264,6 +1257,8 @@
+ static long fb_compat_ioctl(struct file *file, unsigned int cmd,
+                           unsigned long arg)
++__acquires(&info->lock)
++__releases(&info->lock)
+ {
+       struct inode *inode = file->f_path.dentry->d_inode;
+       int fbidx = iminor(inode);
+@@ -1271,6 +1266,7 @@
+       struct fb_ops *fb = info->fbops;
+       long ret = -ENOIOCTLCMD;
++      mutex_lock(&info->lock);
+       switch(cmd) {
+       case FBIOGET_VSCREENINFO:
+       case FBIOPUT_VSCREENINFO:
+@@ -1296,6 +1292,7 @@
+                       ret = fb->fb_compat_ioctl(info, cmd, arg);
+               break;
+       }
++      mutex_unlock(&info->lock);
+       return ret;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/geode/gx1fb_core.c linux-2.6.29-rc3.owrt/drivers/video/geode/gx1fb_core.c
+--- linux-2.6.29.owrt/drivers/video/geode/gx1fb_core.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/geode/gx1fb_core.c     2009-05-10 23:48:29.000000000 +0200
+@@ -136,10 +136,13 @@
+ {
+       struct geodefb_par *par = info->par;
+-      if (info->var.bits_per_pixel == 16)
++      if (info->var.bits_per_pixel == 16) {
+               info->fix.visual = FB_VISUAL_TRUECOLOR;
+-      else
++              fb_dealloc_cmap(&info->cmap);
++      } else {
+               info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++              fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
++      }
+       info->fix.line_length = gx1_line_delta(info->var.xres, info->var.bits_per_pixel);
+@@ -312,10 +315,6 @@
+       if (!par->panel_x)
+               par->enable_crt = 1; /* fall back to CRT if no panel is specified */
+-      if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+-              framebuffer_release(info);
+-              return NULL;
+-      }
+       return info;
+ }
+@@ -375,11 +374,8 @@
+               release_mem_region(gx1_gx_base() + 0x8300, 0x100);
+       }
+-      if (info) {
+-              fb_dealloc_cmap(&info->cmap);
++      if (info)
+               framebuffer_release(info);
+-      }
+-
+       return ret;
+ }
+@@ -399,7 +395,6 @@
+       iounmap(par->dc_regs);
+       release_mem_region(gx1_gx_base() + 0x8300, 0x100);
+-      fb_dealloc_cmap(&info->cmap);
+       pci_set_drvdata(pdev, NULL);
+       framebuffer_release(info);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/geode/gxfb_core.c linux-2.6.29-rc3.owrt/drivers/video/geode/gxfb_core.c
+--- linux-2.6.29.owrt/drivers/video/geode/gxfb_core.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/geode/gxfb_core.c      2009-05-10 23:48:29.000000000 +0200
+@@ -171,10 +171,13 @@
+ static int gxfb_set_par(struct fb_info *info)
+ {
+-      if (info->var.bits_per_pixel > 8)
++      if (info->var.bits_per_pixel > 8) {
+               info->fix.visual = FB_VISUAL_TRUECOLOR;
+-      else
++              fb_dealloc_cmap(&info->cmap);
++      } else {
+               info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++              fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
++      }
+       info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel);
+@@ -328,11 +331,6 @@
+       info->var.grayscale     = 0;
+-      if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+-              framebuffer_release(info);
+-              return NULL;
+-      }
+-
+       return info;
+ }
+@@ -445,10 +443,8 @@
+               pci_release_region(pdev, 1);
+       }
+-      if (info) {
+-              fb_dealloc_cmap(&info->cmap);
++      if (info)
+               framebuffer_release(info);
+-      }
+       return ret;
+ }
+@@ -471,7 +467,6 @@
+       iounmap(par->gp_regs);
+       pci_release_region(pdev, 1);
+-      fb_dealloc_cmap(&info->cmap);
+       pci_set_drvdata(pdev, NULL);
+       framebuffer_release(info);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/geode/lxfb_core.c linux-2.6.29-rc3.owrt/drivers/video/geode/lxfb_core.c
+--- linux-2.6.29.owrt/drivers/video/geode/lxfb_core.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/geode/lxfb_core.c      2009-05-10 23:48:29.000000000 +0200
+@@ -278,10 +278,13 @@
+ static int lxfb_set_par(struct fb_info *info)
+ {
+-      if (info->var.bits_per_pixel > 8)
++      if (info->var.bits_per_pixel > 8) {
+               info->fix.visual = FB_VISUAL_TRUECOLOR;
+-      else
++              fb_dealloc_cmap(&info->cmap);
++      } else {
+               info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++              fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
++      }
+       info->fix.line_length = lx_get_pitch(info->var.xres,
+               info->var.bits_per_pixel);
+@@ -448,11 +451,6 @@
+       info->pseudo_palette    = (void *)par + sizeof(struct lxfb_par);
+-      if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+-              framebuffer_release(info);
+-              return NULL;
+-      }
+-
+       info->var.grayscale     = 0;
+       return info;
+@@ -581,10 +579,8 @@
+               pci_release_region(pdev, 3);
+       }
+-      if (info) {
+-              fb_dealloc_cmap(&info->cmap);
++      if (info)
+               framebuffer_release(info);
+-      }
+       return ret;
+ }
+@@ -608,7 +604,6 @@
+       iounmap(par->vp_regs);
+       pci_release_region(pdev, 3);
+-      fb_dealloc_cmap(&info->cmap);
+       pci_set_drvdata(pdev, NULL);
+       framebuffer_release(info);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/i810/i810_main.c linux-2.6.29-rc3.owrt/drivers/video/i810/i810_main.c
+--- linux-2.6.29.owrt/drivers/video/i810/i810_main.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/i810/i810_main.c       2009-05-10 23:48:29.000000000 +0200
+@@ -993,7 +993,6 @@
+       struct i810fb_par *par = info->par;
+       int line_length, vidmem, mode_valid = 0, retval = 0;
+       u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+-
+       /*
+        *  Memory limit
+        */
+@@ -1003,12 +1002,12 @@
+       if (vidmem > par->fb.size) {
+               vyres = par->fb.size/line_length;
+               if (vyres < var->yres) {
+-                      vyres = info->var.yres;
++                      vyres = yres;
+                       vxres = par->fb.size/vyres;
+                       vxres /= var->bits_per_pixel >> 3;
+                       line_length = get_line_length(par, vxres, 
+                                                     var->bits_per_pixel);
+-                      vidmem = line_length * info->var.yres;
++                      vidmem = line_length * yres;
+                       if (vxres < var->xres) {
+                               printk("i810fb: required video memory, "
+                                      "%d bytes, for %dx%d-%d (virtual) "
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/Kconfig linux-2.6.29-rc3.owrt/drivers/video/Kconfig
+--- linux-2.6.29.owrt/drivers/video/Kconfig    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/Kconfig        2009-05-10 23:48:29.000000000 +0200
+@@ -41,7 +41,7 @@
+         You need an utility program called fbset to make full use of frame
+         buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+         and the Framebuffer-HOWTO at
+-        <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
++        <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+         information.
+         Say Y here and to the driver for your graphics board below if you
+@@ -1054,7 +1054,9 @@
+ config FB_I810
+       tristate "Intel 810/815 support (EXPERIMENTAL)"
+-      depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
++      depends on FB && EXPERIMENTAL && PCI && X86_32
++      select AGP
++      select AGP_INTEL
+       select FB_MODE_HELPERS
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+@@ -1117,7 +1119,9 @@
+ config FB_INTEL
+       tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
+-      depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
++      depends on FB && EXPERIMENTAL && PCI && X86
++      select AGP
++      select AGP_INTEL
+       select FB_MODE_HELPERS
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/logo/logo_linux_clut224.ppm linux-2.6.29-rc3.owrt/drivers/video/logo/logo_linux_clut224.ppm
+--- linux-2.6.29.owrt/drivers/video/logo/logo_linux_clut224.ppm        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/logo/logo_linux_clut224.ppm    2009-05-10 23:48:29.000000000 +0200
+@@ -1,2828 +1,1604 @@
+ P3
+-145 113
++# Standard 224-color Linux logo
++80 80
+ 255
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  3 4 4  6 7 7
+-8 10 10  8 10 10  6 8 8  6 7 7  3 4 4  2 2 2
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  4 5 5  17 18 17
+-27 29 28  35 37 36  40 43 41  43 45 43  40 43 41  37 39 37
+-32 34 33  27 30 29  23 25 24  17 21 21  15 18 18  12 15 15
+-11 13 13  8 10 10  6 7 7  3 4 4  1 1 1  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  13 13 13  32 34 33  49 51 48  60 60 56  58 59 55
+-55 57 54  55 56 53  49 51 48  43 45 43  39 40 39  33 37 35
+-28 31 30  23 27 26  20 23 23  17 20 20  14 17 17  13 16 16
+-11 14 14  10 13 13  10 12 12  9 11 11  8 10 10  6 7 7
+-2 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  12 15 15
+-12 15 15  8 9 9  2 3 3  0 0 0  1 1 1  25 27 26
+-55 56 53  68 70 65  65 66 61  65 66 61  63 64 60  63 64 60
+-58 59 55  51 52 50  47 48 46  41 42 42  35 37 36  30 32 31
+-26 28 27  20 24 24  18 22 22  16 19 19  14 17 17  13 16 16
+-12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
+-8 9 9  6 8 8  3 3 3  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  6 7 7  20 24 24  23 27 26
+-23 27 26  18 22 22  11 13 13  23 24 24  61 63 57  72 73 67
+-72 73 67  68 70 65  68 70 65  68 70 65  63 64 60  58 59 55
+-55 56 53  47 48 46  41 42 42  35 37 36  30 32 31  26 28 27
+-20 24 24  18 22 22  16 20 20  15 19 19  14 17 17  13 16 16
+-12 15 15  12 15 15  11 14 14  10 13 13  10 12 12  9 11 11
+-8 10 10  8 9 9  7 9 9  6 7 7  1 2 2  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 1  4 5 5  5 6 5  4 5 5
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  15 19 19  40 41 39  53 55 47
+-33 36 34  27 30 29  51 52 50  72 73 67  72 73 67  72 73 67
+-72 73 67  68 70 65  68 70 65  63 64 60  58 59 55  51 52 50
+-47 48 46  40 43 41  33 37 35  30 32 31  26 28 27  20 24 24
+-18 22 22  17 21 21  16 19 19  14 18 18  14 17 17  13 17 17
+-13 16 16  12 15 15  12 15 15  11 14 14  10 13 13  10 12 12
+-9 11 11  8 10 10  8 9 9  7 9 9  6 8 8  3 4 4
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-2 2 2  6 8 8  10 12 12  10 12 12  10 12 12  10 12 12
+-6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  20 23 23  71 71 57  131 127 93
+-115 113 82  63 64 60  72 73 67  72 73 67  72 73 67  72 73 67
+-68 70 65  65 66 61  61 63 57  55 57 54  49 51 48  43 45 43
+-39 40 39  33 36 34  28 31 30  23 27 26  20 24 24  20 23 23
+-17 21 21  16 20 20  15 19 19  15 18 18  14 18 18  14 17 17
+-13 17 17  13 16 16  12 15 15  12 15 15  11 14 14  10 13 13
+-10 12 12  9 11 11  8 10 10  7 9 9  7 9 9  6 8 8
+-4 5 5  0 0 0  0 0 0  0 0 0  1 1 1  6 7 7
+-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+-10 12 12  3 4 4  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  18 22 22  71 71 57  144 139 99
+-84 83 72  68 70 65  72 73 67  72 73 67  68 70 65  65 66 61
+-63 64 60  55 57 54  51 52 50  47 48 46  40 43 41  35 37 36
+-30 32 31  27 29 28  23 27 26  20 24 24  18 22 22  17 21 21
+-16 20 20  15 19 19  15 19 19  15 19 19  15 18 18  14 18 18
+-14 17 17  13 17 17  13 16 16  12 15 15  12 15 15  11 14 14
+-10 13 13  9 12 12  9 11 11  8 10 10  7 9 9  6 8 8
+-6 8 8  3 4 4  0 0 0  2 2 2  8 10 10  10 12 12
+-10 12 12  10 12 12  11 13 13  36 38 35  61 61 53  48 49 45
+-10 12 12  7 9 9  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  15 19 19  61 61 53  84 83 72
+-68 70 65  72 73 67  68 70 65  68 70 65  63 64 60  58 59 55
+-51 52 50  47 48 46  41 42 42  37 39 37  32 35 33  28 31 30
+-23 27 26  20 24 24  20 23 23  18 22 22  17 21 21  17 21 21
+-17 21 21  17 21 21  17 20 20  16 20 20  16 20 20  16 19 19
+-15 18 18  14 18 18  13 17 17  13 16 16  12 15 15  12 15 15
+-11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  7 9 9
+-6 8 8  6 8 8  5 6 5  9 11 11  10 12 12  10 12 12
+-19 20 18  82 81 62  149 145 103  160 154 106  142 137 94  96 95 69
+-10 12 12  10 12 12  1 1 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  10 12 12  44 46 43  68 70 65
+-72 73 67  68 70 65  68 70 65  63 64 60  55 57 54  49 51 48
+-43 45 43  39 40 39  33 37 35  30 32 31  26 28 27  23 27 26
+-20 24 24  18 22 22  18 22 22  18 22 22  18 22 22  20 23 23
+-20 24 24  23 25 24  23 25 24  22 24 23  20 23 23  18 22 22
+-17 20 20  15 19 19  15 18 18  14 17 17  13 16 16  12 15 15
+-11 14 14  11 13 13  10 12 12  9 11 11  8 10 10  8 9 9
+-7 9 9  7 9 9  10 12 12  10 12 12  10 12 12  71 71 57
+-164 159 111  186 182 128  186 182 128  171 165 117  151 147 98  96 95 69
+-10 12 12  10 12 12  3 3 3  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  8 10 10  63 64 60  68 70 65
+-72 73 67  68 70 65  63 64 60  55 57 54  47 48 46  40 43 41
+-33 37 35  30 32 31  27 29 28  23 27 26  20 24 24  20 23 23
+-18 22 22  18 22 22  20 23 22  21 25 23  23 27 26  27 29 28
+-28 31 30  31 33 31  31 33 31  31 33 31  28 31 30  26 28 27
+-23 25 24  20 23 22  16 20 20  15 18 18  14 17 17  13 16 16
+-12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
+-10 12 12  10 13 13  10 12 12  12 14 14  96 95 69  165 161 109
+-186 182 128  192 187 134  192 187 134  176 171 126  160 154 106  103 101 77
+-10 12 12  10 12 12  5 6 5  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  35 37 36  68 70 65  72 73 67
+-68 70 65  65 66 61  58 59 55  49 51 48  40 43 41  33 37 35
+-28 31 30  23 27 26  20 24 24  20 23 23  18 22 22  18 22 22
+-18 22 22  20 23 23  23 27 26  27 30 29  32 35 33  37 39 37
+-40 43 41  44 46 43  46 47 43  44 46 43  40 43 41  36 38 35
+-31 33 31  27 29 28  22 24 23  17 21 21  15 18 18  14 17 17
+-13 16 16  12 15 15  11 14 14  11 14 14  11 13 13  13 16 16
+-13 16 16  11 14 14  10 12 12  79 78 62  142 137 94  164 159 111
+-178 174 128  192 187 134  192 187 134  176 171 126  160 154 106  96 95 69
+-10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  55 57 54  68 70 65  72 73 67
+-68 70 65  63 64 60  55 56 53  43 45 43  35 37 36  28 31 30
+-23 27 26  20 24 24  18 22 22  17 21 21  17 21 21  17 21 21
+-20 24 24  25 27 26  31 33 31  38 39 37  46 47 43  53 55 47
+-61 61 53  66 65 55  66 65 55  66 65 55  61 61 53  53 55 47
+-46 47 43  37 39 37  30 33 30  24 26 24  17 21 21  15 18 18
+-13 17 17  12 15 15  12 15 15  13 16 16  14 18 18  14 18 18
+-14 17 17  12 15 15  30 31 28  118 116 76  134 131 96  160 154 106
+-174 170 121  178 174 128  178 174 128  171 165 117  151 147 98  96 95 69
+-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  63 64 60  68 70 65  68 70 65
+-65 66 61  58 59 55  49 51 48  39 40 39  30 32 31  23 27 26
+-20 24 24  18 22 22  17 21 21  16 20 20  17 21 21  20 23 23
+-25 27 26  32 35 33  43 44 41  53 55 47  66 65 55  75 75 61
+-82 81 62  84 83 72  87 86 72  87 86 72  82 81 62  75 75 61
+-66 65 55  53 55 47  40 41 39  31 33 31  23 25 24  17 20 20
+-14 18 18  13 16 16  12 15 15  12 15 15  13 17 17  14 18 18
+-14 18 18  13 16 16  46 47 43  96 95 69  125 122 87  142 137 94
+-160 154 106  165 161 109  164 159 111  155 149 109  142 137 94  75 75 61
+-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  60 60 56  68 70 65  68 70 65
+-63 64 60  55 57 54  46 47 45  35 37 36  27 30 29  23 25 24
+-18 22 22  17 21 21  16 20 20  17 21 21  18 22 22  23 27 26
+-31 33 31  43 44 41  55 56 53  71 71 57  84 83 72  92 91 72
+-103 101 77  92 91 72  82 81 62  82 81 62  87 86 72  92 91 72
+-84 83 72  71 71 57  55 56 53  43 44 41  30 33 30  22 24 23
+-16 19 19  14 17 17  12 15 15  12 15 15  13 16 16  14 18 18
+-14 18 18  14 17 17  43 44 41  82 81 62  118 116 76  125 122 87
+-142 137 94  144 139 99  144 139 99  134 131 96  118 116 76  53 55 47
+-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  47 48 46  63 64 60  63 64 60
+-55 57 54  49 51 48  40 43 41  32 34 33  26 28 27  20 24 24
+-18 22 22  16 20 20  16 20 20  17 21 21  20 24 24  28 31 30
+-40 41 39  53 55 47  75 75 61  90 89 73  87 86 72  48 49 45
+-14 14 13  2 2 2  1 2 2  1 1 1  1 1 1  2 2 2
+-19 20 18  43 44 41  66 65 55  53 55 47  38 39 37  26 28 27
+-18 22 22  14 18 18  13 16 16  12 15 15  12 15 15  13 17 17
+-14 18 18  14 18 18  30 31 28  66 65 55  96 95 69  103 101 77
+-118 116 76  118 116 76  118 116 76  118 116 76  103 101 77  36 38 35
+-10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  28 31 30  55 57 54  51 52 50
+-49 51 48  41 42 42  35 37 36  28 31 30  23 27 26  20 23 23
+-17 21 21  16 20 20  16 20 20  18 22 22  23 27 26  33 36 34
+-48 49 45  71 71 57  82 81 62  43 44 41  8 9 9  6 7 7
+-6 7 7  6 7 7  6 7 7  5 6 5  4 5 5  3 4 4
+-2 3 3  1 2 2  4 5 4  36 38 35  48 49 45  32 35 33
+-21 25 23  16 19 19  13 17 17  12 15 15  12 15 15  13 16 16
+-14 18 18  14 18 18  16 18 16  36 38 35  61 61 53  82 81 62
+-96 95 69  96 95 69  96 95 69  96 95 69  79 78 62  19 20 18
+-10 12 12  10 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  13 13 13  46 47 45  43 45 43
+-40 43 41  35 37 36  30 32 31  23 27 26  20 24 24  18 22 22
+-17 21 21  16 20 20  17 21 21  20 23 23  27 30 29  40 41 39
+-61 61 53  53 55 47  16 17 16  9 11 11  10 12 12  10 12 12
+-10 12 12  10 12 12  10 12 12  9 11 11  8 10 10  8 9 9
+-6 8 8  5 6 5  4 5 5  2 3 3  19 20 18  38 39 37
+-26 28 27  17 21 21  14 17 17  13 16 16  12 15 15  12 15 15
+-13 17 17  14 18 18  12 15 15  13 12 7  30 31 28  46 47 43
+-53 55 47  66 65 55  66 65 55  53 55 47  36 38 35  10 12 12
+-10 12 12  10 12 12  2 3 3  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  1 1 1  33 37 35  35 37 36
+-32 35 33  28 31 30  23 27 26  20 24 24  18 22 22  17 21 21
+-16 20 20  16 20 20  17 21 21  21 25 23  31 33 31  44 46 43
+-31 33 31  11 13 13  12 14 14  12 15 15  13 16 16  14 17 17
+-14 17 17  14 17 17  14 17 17  13 16 16  12 15 15  12 14 14
+-11 13 13  9 11 11  8 10 10  6 8 8  4 5 5  17 18 17
+-30 33 30  20 23 22  15 18 18  13 16 16  12 15 15  12 14 14
+-13 16 16  14 17 17  14 18 18  11 12 11  7 7 5  16 17 12
+-21 22 20  30 31 28  25 27 25  21 22 20  14 14 13  10 12 12
+-10 12 12  9 11 11  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  18 22 22  27 30 29
+-27 29 28  40 41 39  53 55 47  53 55 47  53 55 47  46 47 43
+-25 27 25  16 20 20  17 21 21  23 25 24  31 33 31  20 20 20
+-12 15 15  14 17 17  15 19 19  16 20 20  17 21 21  18 22 22
+-18 22 22  18 22 22  18 22 22  17 21 21  17 21 21  16 19 19
+-15 18 18  13 16 16  12 15 15  10 12 12  8 10 10  6 8 8
+-21 22 21  22 24 23  15 19 19  13 17 17  13 16 16  12 15 15
+-12 15 15  13 17 17  14 18 18  14 18 18  13 15 14  10 9 6
+-7 7 5  7 7 5  7 7 5  9 11 11  10 12 12  10 12 12
+-10 12 12  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  82 81 62
+-118 116 76  118 116 76  161 156 96  161 156 96  161 156 96  118 116 76
+-118 116 76  96 95 69  53 55 47  22 24 23  14 17 17  13 16 16
+-15 19 19  17 21 21  18 22 22  20 24 24  20 24 24  23 27 26
+-23 27 26  23 27 26  23 27 26  23 27 26  23 27 26  20 24 24
+-20 23 23  17 21 21  16 19 19  14 17 17  12 15 15  10 12 12
+-9 11 11  20 23 22  16 19 19  14 17 17  13 16 16  12 15 15
+-11 14 14  13 16 16  14 17 17  14 18 18  14 17 17  12 15 15
+-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+-9 11 11  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  53 55 47  161 156 96
+-161 156 96  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  161 156 96  118 116 76  96 95 69  21 22 20  16 19 19
+-18 22 22  20 24 24  23 27 26  23 27 26  26 28 27  27 30 29
+-27 30 29  18 22 22  12 14 14  8 10 10  9 11 11  17 21 21
+-23 27 26  23 27 26  20 24 24  18 22 22  16 20 20  14 17 17
+-12 14 14  14 17 17  16 20 20  14 17 17  13 17 17  13 16 16
+-12 15 15  12 15 15  13 17 17  14 18 18  14 17 17  13 16 16
+-11 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+-4 5 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  13 12 7  118 116 76  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  30 31 28
+-20 24 24  23 27 26  27 30 29  28 31 30  30 32 31  23 27 26
+-16 19 19  17 21 21  12 15 15  9 11 11  10 12 12  9 11 11
+-20 24 24  28 31 30  26 28 27  23 27 26  20 24 24  17 21 21
+-15 19 19  13 16 16  16 19 19  14 18 18  14 17 17  13 16 16
+-12 15 15  11 14 14  13 16 16  14 17 17  14 18 18  14 17 17
+-12 15 15  10 12 12  10 12 12  10 12 12  10 12 12  8 9 9
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  82 81 62  161 156 96  230 229 82
+-230 229 82  233 233 100  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  118 116 76
+-27 29 28  27 30 29  30 32 31  30 32 31  23 27 26  20 24 24
+-26 28 27  17 21 21  6 7 7  72 73 67  145 141 105  15 15 15
+-14 17 17  33 37 35  30 32 31  28 31 30  26 28 27  23 27 26
+-20 23 23  16 20 20  15 19 19  14 18 18  14 17 17  13 16 16
+-12 15 15  11 14 14  12 15 15  13 17 17  14 18 18  14 17 17
+-13 16 16  11 13 13  10 12 12  10 12 12  9 11 11  1 1 1
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  16 17 12  161 156 96  230 229 82  230 229 82
+-243 242 120  235 234 117  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+-82 81 62  28 31 30  28 31 30  27 30 29  28 31 30  30 32 31
+-33 37 35  13 16 16  3 3 3  105 104 92  210 208 158  12 14 14
+-17 21 21  33 37 35  33 37 35  32 35 33  30 32 31  27 30 29
+-23 27 26  20 23 23  17 20 20  15 18 18  14 18 18  13 17 17
+-13 16 16  12 15 15  11 14 14  13 16 16  14 17 17  14 18 18
+-13 17 17  12 15 15  10 12 12  10 12 12  3 4 4  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  96 95 69  230 229 82  230 229 82  244 244 132
+-241 241 143  243 242 120  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-161 156 96  46 47 43  32 35 33  33 37 35  33 37 35  33 37 35
+-40 43 41  23 27 26  1 1 1  2 2 2  24 26 24  14 17 17
+-23 27 26  33 37 35  33 37 35  33 37 35  33 37 35  30 32 31
+-27 30 29  23 27 26  20 23 23  15 18 18  14 18 18  14 17 17
+-13 16 16  12 15 15  11 14 14  12 15 15  13 17 17  14 17 17
+-14 17 17  13 16 16  11 13 13  6 8 8  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  16 17 12  161 156 96  230 229 82  235 234 117  239 239 170
+-239 239 170  236 236 101  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  118 116 76  33 37 35  33 37 35  37 39 37  37 39 37
+-43 45 43  49 51 48  20 24 24  8 10 10  17 20 20  35 37 36
+-33 37 35  40 43 41  37 39 37  35 37 36  33 37 35  33 37 35
+-30 32 31  27 30 29  23 27 26  15 19 19  14 18 18  14 17 17
+-13 17 17  13 16 16  12 15 15  11 14 14  13 16 16  14 17 17
+-14 17 17  13 17 17  11 14 14  4 5 5  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  96 95 69  230 229 82  230 229 82  239 239 170  251 251 187
+-241 241 143  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  161 156 96  36 38 35  33 37 35  33 37 35  33 37 35
+-37 39 37  47 48 46  55 57 54  55 57 54  49 51 48  43 45 43
+-43 45 43  43 45 43  40 43 41  40 43 41  37 39 37  33 37 35
+-33 37 35  28 31 30  26 28 27  16 20 20  15 18 18  14 18 18
+-14 17 17  13 16 16  12 15 15  11 14 14  12 15 15  13 17 17
+-14 17 17  14 17 17  8 10 10  5 7 7  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-16 17 12  230 229 82  230 229 82  243 242 120  251 251 187  251 251 187
+-246 246 123  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  66 65 55  30 32 31  32 35 33  33 37 35
+-33 37 35  37 39 37  40 43 41  47 48 46  49 51 48  51 52 50
+-55 57 54  55 57 54  51 52 50  47 48 46  43 45 43  39 40 39
+-33 37 35  30 32 31  26 28 27  17 21 21  15 19 19  14 18 18
+-14 17 17  13 16 16  12 15 15  12 14 14  11 14 14  13 16 16
+-14 17 17  12 15 15  7 9 9  6 8 8  1 1 1  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-96 95 69  230 229 82  230 229 82  239 239 170  251 251 187  239 239 170
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  96 95 69  27 30 29  28 31 30  30 32 31
+-33 37 35  40 43 41  46 47 45  55 57 54  63 64 60  72 73 67
+-72 73 67  72 73 67  72 73 67  65 66 61  55 57 54  47 48 46
+-39 40 39  32 35 33  27 30 29  17 21 21  15 19 19  15 18 18
+-14 18 18  13 17 17  13 16 16  12 15 15  11 14 14  12 14 14
+-13 16 16  9 11 11  7 9 9  9 11 11  66 65 55  115 113 82
+-21 22 20  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 12 7
+-230 229 82  230 229 82  236 236 101  251 251 187  251 251 187  246 246 123
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  118 116 76  23 27 26  26 28 27  32 35 33
+-51 52 50  90 89 73  110 109 94  145 141 105  168 163 120  177 172 135
+-177 172 135  188 184 146  188 184 146  181 176 137  194 191 148  188 184 146
+-184 179 149  188 184 146  188 184 146  156 151 111  177 172 135  181 176 137
+-177 172 135  168 163 120  168 163 120  158 153 112  156 151 111  158 153 112
+-156 151 111  158 153 112  177 172 135  188 184 146  188 184 146  194 189 146
+-36 38 35  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  82 81 62
+-230 229 82  230 229 82  244 244 132  251 251 187  244 244 132  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  82 81 62
+-96 95 69  230 229 82  181 178 103  110 109 94  156 151 111  188 184 146
+-188 184 146  197 193 154  188 184 146  184 181 136  188 184 146  168 163 120
+-168 163 120  178 174 128  156 151 111  158 153 112  174 170 121  156 151 111
+-156 151 111  158 153 112  156 151 111  168 163 120  178 174 128  181 176 137
+-176 171 126  178 174 128  184 181 136  176 171 126  178 174 128  184 181 136
+-176 171 126  178 174 128  184 181 136  164 159 111  155 149 109  96 95 69
+-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  2 2 1  161 156 96
+-230 229 82  230 229 82  244 244 132  244 244 132  236 236 101  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  46 47 43  82 81 62
+-158 153 112  197 193 154  194 189 146  184 181 136  188 184 146  168 163 120
+-156 151 111  137 133 100  131 127 93  137 133 100  137 133 100  158 153 112
+-121 119 87  137 133 100  156 151 111  145 141 105  99 98 80  84 83 72
+-63 64 60  52 53 49  40 43 41  33 36 34  36 38 35  36 38 35
+-38 39 37  43 44 41  43 44 41  46 47 43  48 49 45  48 49 45
+-46 47 43  36 38 35  30 31 28  19 20 18  6 7 7  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  36 38 35  230 229 82
+-230 229 82  230 229 82  246 246 123  236 236 101  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  53 55 47  121 119 87
+-176 171 126  171 165 117  161 156 96  82 81 62  53 55 47  33 37 35
+-39 40 39  63 64 60  99 98 80  121 119 87  137 133 100  177 172 135
+-176 171 126  184 181 136  131 127 93  131 127 93  110 109 94  84 83 72
+-51 52 50  39 40 39  27 29 28  18 22 22  16 19 19  15 19 19
+-15 19 19  14 18 18  14 17 17  13 16 16  12 15 15  11 14 14
+-10 13 13  9 12 12  9 11 11  8 9 9  7 9 9  1 1 1
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
+-230 229 82  230 229 82  236 236 101  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  96 95 69  71 71 57
+-36 38 35  118 116 76  118 116 76  12 15 15  15 18 18  20 24 24
+-33 37 35  55 56 53  84 83 72  110 109 94  145 141 105  110 109 94
+-168 163 120  121 119 87  156 151 111  131 127 93  87 86 72  61 63 57
+-47 48 46  28 31 30  18 22 22  15 19 19  15 18 18  15 19 19
+-15 19 19  14 18 18  14 17 17  13 17 17  13 16 16  12 15 15
+-11 13 13  10 12 12  9 11 11  8 10 10  7 9 9  3 3 3
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  1 1 0  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+-161 156 96  230 229 82  118 116 76  11 14 14  14 17 17  18 22 22
+-27 30 29  40 43 41  60 60 56  84 83 72  105 104 92  110 109 94
+-110 109 94  110 109 94  99 98 80  90 89 73  68 70 65  47 48 46
+-32 34 33  23 25 24  20 23 23  17 21 21  15 19 19  14 17 17
+-15 19 19  15 18 18  14 18 18  13 17 17  13 16 16  12 15 15
+-11 14 14  10 12 12  9 11 11  8 10 10  7 9 9  4 5 5
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  161 156 96  118 116 76  11 13 13  13 16 16  15 19 19
+-20 24 24  30 32 31  40 43 41  51 52 50  63 64 60  72 73 67
+-65 66 61  65 66 61  65 66 61  55 57 54  46 47 45  33 37 35
+-27 29 28  20 24 24  17 21 21  16 20 20  16 20 20  15 19 19
+-15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
+-11 14 14  10 13 13  9 12 12  8 10 10  7 9 9  6 7 7
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  53 55 47  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-161 156 96  118 116 76  53 55 47  10 13 13  12 15 15  14 17 17
+-17 20 20  20 24 24  27 29 28  32 34 33  37 39 37  40 43 41
+-43 45 43  41 42 42  35 37 36  30 32 31  28 31 30  23 27 26
+-20 23 23  17 21 21  16 20 20  16 20 20  16 20 20  16 19 19
+-15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
+-11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  10 12 12
+-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  82 81 62  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
+-118 116 76  82 81 62  13 14 12  10 13 13  12 15 15  13 17 17
+-15 19 19  16 20 20  20 23 23  20 24 24  23 27 26  26 28 27
+-26 28 27  26 28 27  23 27 26  18 22 22  20 23 23  17 21 21
+-17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 19 19
+-15 19 19  15 19 19  15 18 18  14 17 17  13 17 17  13 16 16
+-12 15 15  12 14 14  12 14 14  12 14 14  12 14 14  23 24 24
+-6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  161 156 96  161 156 96  118 116 76
+-71 71 57  13 14 12  9 12 12  10 13 13  12 15 15  13 17 17
+-15 18 18  15 19 19  16 20 20  17 21 21  17 21 21  18 22 22
+-18 22 22  18 22 22  17 21 21  16 19 19  15 18 18  14 18 18
+-16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-15 19 19  15 19 19  15 18 18  14 18 18  16 20 20  23 25 24
+-17 21 21  25 27 26  47 48 46  47 48 46  51 52 50  72 73 67
+-33 36 34  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  161 156 96  118 116 76  118 116 76  46 47 43
+-9 11 11  9 11 11  10 12 12  11 13 13  12 15 15  14 17 17
+-15 18 18  15 19 19  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-15 19 19  16 20 20  20 24 24  55 56 53  32 34 33  84 83 72
+-90 89 73  110 109 94  110 109 94  105 104 92  110 109 94  110 109 94
+-72 73 67  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  96 95 69  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  161 156 96  118 116 76  82 81 62  16 17 12  9 11 11
+-9 11 11  9 12 12  10 13 13  12 14 14  13 16 16  14 18 18
+-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 19 19  33 36 34  99 98 80  156 151 111  145 141 105  184 179 149
+-168 163 120  184 179 149  177 172 135  156 151 111  145 141 105  110 109 94
+-90 89 73  2 2 2  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  71 71 57  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+-230 229 82  161 156 96  230 229 82  230 229 82  230 229 82  161 156 96
+-118 116 76  82 81 62  30 31 28  9 11 11  9 11 11  9 11 11
+-10 12 12  10 13 13  11 14 14  13 16 16  14 17 17  15 18 18
+-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-18 22 22  58 59 55  137 133 100  197 193 154  214 212 158  210 208 158
+-197 193 154  184 179 149  184 179 149  137 133 100  110 109 94  99 98 80
+-84 83 72  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+-161 156 96  161 156 96  161 156 96  161 156 96  118 116 76  71 71 57
+-21 22 20  12 14 14  11 13 13  10 12 12  10 12 12  10 13 13
+-11 13 13  12 15 15  13 16 16  14 17 17  14 18 18  15 19 19
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  17 21 21
+-23 27 26  84 83 72  184 179 149  251 251 187  210 208 158  184 179 149
+-184 179 149  156 151 111  110 109 94  84 83 72  63 64 60  51 52 50
+-18 22 22  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
+-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
+-161 156 96  161 156 96  118 116 76  53 55 47  20 23 22  16 19 19
+-13 16 16  12 15 15  12 14 14  11 14 14  11 14 14  11 14 14
+-12 15 15  13 16 16  14 17 17  15 19 19  16 20 20  17 21 21
+-23 27 26  18 22 22  20 24 24  23 27 26  30 32 31  17 21 21
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-23 27 26  33 37 35  137 133 100  156 151 111  158 153 112  105 104 92
+-105 104 92  68 70 65  39 40 39  18 22 22  12 14 14  12 15 15
+-9 11 11  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  230 229 82
+-230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  118 116 76
+-118 116 76  66 65 55  43 45 43  32 34 33  25 27 26  20 23 22
+-17 20 20  15 18 18  14 17 17  15 18 18  13 16 16  14 17 17
+-14 18 18  16 20 20  32 34 33  55 57 54  58 59 55  72 73 67
+-105 104 92  55 57 54  65 66 61  63 64 60  40 43 41  33 37 35
+-41 42 42  20 24 24  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-17 21 21  26 28 27  30 32 31  35 37 36  68 70 65  39 40 39
+-23 27 26  15 18 18  13 16 16  11 14 14  9 12 12  8 10 10
+-7 9 9  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
+-230 229 82  230 229 82  230 229 82  96 95 69  30 31 28  49 51 48
+-90 89 73  68 70 65  55 57 54  47 48 46  47 48 46  43 45 43
+-32 34 33  43 45 43  43 45 43  23 27 26  25 27 26  40 43 41
+-40 43 41  90 89 73  110 109 94  145 141 105  156 151 111  156 151 111
+-184 179 149  184 179 149  177 172 135  184 179 149  137 133 100  84 83 72
+-105 104 92  63 64 60  49 51 48  47 48 46  28 31 30  18 22 22
+-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  15 19 19  15 19 19  15 19 19  18 22 22  15 19 19
+-13 16 16  12 15 15  11 14 14  10 13 13  9 12 12  9 11 11
+-8 10 10  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-30 31 28  230 229 82  71 71 57  2 2 1  0 0 0  58 59 55
+-105 104 92  84 83 72  65 66 61  84 83 72  110 109 94  110 109 94
+-145 141 105  105 104 92  110 109 94  110 109 94  84 83 72  110 109 94
+-158 153 112  197 193 154  197 193 154  239 239 170  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  197 193 154
+-197 193 154  184 179 149  145 141 105  137 133 100  105 104 92  47 48 46
+-20 23 23  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 19 19  15 19 19  15 19 19  14 18 18  14 17 17
+-13 17 17  13 16 16  12 14 14  12 14 14  13 13 13  13 13 13
+-13 13 13  12 12 12  10 10 9  6 7 7  2 2 2  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 0  0 0 0  0 0 0  65 66 61
+-105 104 92  84 83 72  84 83 72  110 109 94  184 179 149  210 208 158
+-210 208 158  210 208 158  214 212 158  197 193 154  214 212 158  210 208 158
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  239 239 170  251 251 187  184 179 149  84 83 72
+-26 28 27  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
+-13 17 17  13 16 16  15 15 15  14 14 13  14 14 13  14 14 13
+-13 13 13  13 13 13  12 12 12  12 12 12  12 12 12  3 4 4
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  72 73 67
+-105 104 92  99 98 80  84 83 72  99 98 80  177 172 135  197 193 154
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  214 212 158  197 193 154  99 98 80
+-23 27 26  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
+-14 17 17  16 16 16  16 16 16  16 16 16  15 15 15  14 14 13
+-14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
+-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  84 83 72
+-110 109 94  99 98 80  72 73 67  63 64 60  99 98 80  177 172 135
+-184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  210 208 158  184 179 149  177 172 135  110 109 94  33 37 35
+-17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-16 20 20  16 20 20  15 19 19  15 19 19  15 19 19  14 18 18
+-15 18 18  18 19 18  18 19 18  17 17 17  16 16 16  15 15 15
+-14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
+-10 10 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  2 2 2  105 104 92
+-108 107 93  99 98 80  72 73 67  63 64 60  51 52 50  87 86 72
+-105 104 92  110 109 94  108 107 93  156 151 111  184 179 149  184 179 149
+-197 193 154  197 193 154  197 193 154  184 179 149  184 179 149  177 172 135
+-197 193 154  156 151 111  177 172 135  184 179 149  168 163 120  137 133 100
+-145 141 105  110 109 94  99 98 80  47 48 46  55 57 54  15 19 19
+-16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+-17 20 20  17 21 21  16 20 20  16 19 19  15 19 19  16 19 19
+-20 20 20  21 22 21  20 20 20  19 20 19  18 19 18  16 16 16
+-15 15 15  14 14 13  13 13 13  13 13 13  12 12 12  12 12 12
+-12 12 12  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  58 59 55  110 109 94
+-105 104 92  90 89 73  72 73 67  55 57 54  43 45 43  39 40 39
+-43 45 43  46 47 45  43 45 43  68 70 65  65 66 61  63 64 60
+-108 107 93  72 73 67  105 104 92  90 89 73  72 73 67  40 43 41
+-72 73 67  68 70 65  68 70 65  58 59 55  63 64 60  49 51 48
+-43 45 43  33 36 34  27 30 29  20 24 24  16 20 20  15 19 19
+-15 19 19  15 19 19  15 19 19  16 19 19  16 20 20  16 20 20
+-17 21 21  20 24 24  20 23 22  17 21 21  17 20 20  20 20 20
+-21 22 21  21 22 21  21 22 21  21 22 21  20 20 20  18 19 18
+-16 16 16  15 15 15  13 13 13  13 13 13  12 12 12  12 12 12
+-12 12 12  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  21 22 21  110 109 94  110 109 94
+-105 104 92  84 83 72  68 70 65  51 52 50  41 42 42  33 37 35
+-28 31 30  23 27 26  20 23 23  18 22 22  17 20 20  25 27 26
+-26 28 27  27 30 29  25 27 26  20 23 23  23 27 26  30 32 31
+-20 24 24  17 21 21  18 22 22  15 19 19  26 28 27  20 23 23
+-14 18 18  15 19 19  15 18 18  15 19 19  15 19 19  15 19 19
+-15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  16 19 19
+-16 20 20  22 24 23  24 26 24  22 24 23  20 23 22  22 24 23
+-24 26 24  24 26 24  23 24 24  22 24 23  21 22 21  19 20 19
+-17 17 17  15 15 15  14 14 13  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  2 2 2  99 98 80  110 109 94  108 107 93
+-105 104 92  84 83 72  63 64 60  49 51 48  39 40 39  32 34 33
+-27 30 29  23 25 24  20 23 23  17 20 20  15 19 19  14 18 18
+-14 17 17  13 17 17  13 17 17  13 17 17  13 17 17  13 17 17
+-14 17 17  14 17 17  14 17 17  14 17 17  14 17 17  14 17 17
+-14 18 18  14 18 18  14 18 18  14 18 18  15 18 18  15 19 19
+-15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  15 19 19
+-15 19 19  17 21 21  27 29 28  26 28 27  25 27 26  25 27 26
+-27 29 28  27 29 28  26 28 27  24 26 24  21 22 21  20 20 20
+-18 19 18  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  51 52 50  110 109 94  110 109 94  105 104 92
+-90 89 73  72 73 67  55 57 54  43 45 43  35 37 36  30 32 31
+-26 28 27  20 24 24  17 21 21  16 19 19  15 18 18  14 17 17
+-13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+-13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
+-14 17 17  14 17 17  14 17 17  14 18 18  14 18 18  14 18 18
+-15 18 18  15 18 18  15 19 19  15 19 19  15 19 19  15 19 19
+-15 19 19  15 19 19  27 29 28  32 34 33  28 31 30  27 29 28
+-30 32 31  30 32 31  30 31 28  26 28 27  23 24 24  21 22 21
+-19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  3 3 3  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  10 10 9  108 107 93  110 109 94  108 107 93  99 98 80
+-84 83 72  63 64 60  49 51 48  40 43 41  33 36 34  27 30 29
+-23 27 26  18 22 22  17 20 20  15 18 18  14 17 17  13 16 16
+-13 16 16  13 16 16  12 15 15  12 15 15  12 15 15  12 15 15
+-13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+-13 17 17  13 17 17  14 17 17  14 17 17  14 17 17  14 18 18
+-14 18 18  14 18 18  15 18 18  15 18 18  15 19 19  15 19 19
+-15 19 19  15 19 19  17 21 21  33 36 34  32 34 33  31 33 31
+-33 36 34  33 36 34  31 33 31  27 29 28  25 27 26  21 22 21
+-19 20 19  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  63 64 60  137 133 100  43 45 43  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  68 70 65  110 109 94  110 109 94  105 104 92  84 83 72
+-68 70 65  55 57 54  43 45 43  35 37 36  30 32 31  26 28 27
+-20 24 24  17 21 21  16 19 19  14 17 17  13 16 16  12 15 15
+-12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  12 15 15
+-12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
+-13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
+-14 17 17  14 17 17  14 18 18  14 18 18  14 18 18  15 18 18
+-15 19 19  15 19 19  15 19 19  20 24 24  32 34 33  35 37 36
+-37 39 37  35 37 36  33 36 34  30 32 31  26 28 27  22 24 23
+-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-1 1 1  99 98 80  184 179 149  184 179 149  68 70 65  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-15 15 15  110 109 94  110 109 94  108 107 93  99 98 80  72 73 67
+-61 63 57  49 51 48  39 40 39  33 36 34  27 30 29  23 25 24
+-18 22 22  16 19 19  14 17 17  13 16 16  12 15 15  12 15 15
+-11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
+-11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
+-12 15 15  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+-13 17 17  14 17 17  14 17 17  14 17 17  14 18 18  14 18 18
+-14 18 18  15 18 18  15 19 19  15 19 19  30 32 31  38 39 37
+-39 40 39  39 40 39  35 37 36  31 33 31  27 29 28  22 24 23
+-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
+-110 109 94  197 193 154  210 208 158  184 179 149  68 70 65  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-68 70 65  110 109 94  110 109 94  105 104 92  84 83 72  65 66 61
+-51 52 50  43 45 43  35 37 36  30 32 31  25 27 26  20 23 23
+-17 20 20  15 18 18  13 16 16  12 15 15  12 15 15  11 14 14
+-11 14 14  11 14 14  11 13 13  11 13 13  11 13 13  11 13 13
+-11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
+-12 15 15  12 15 15  12 15 15  12 15 15  13 16 16  13 16 16
+-13 16 16  13 16 16  13 17 17  13 17 17  14 17 17  14 17 17
+-14 18 18  14 18 18  14 18 18  16 19 19  37 39 37  41 42 42
+-41 42 42  41 42 42  38 39 37  32 34 33  27 29 28  23 24 24
+-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  11 11 11  137 133 100
+-197 193 154  251 251 187  239 239 170  184 179 149  31 33 31  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  12 12 12
+-110 109 94  110 109 94  105 104 92  90 89 73  72 73 67  58 59 55
+-46 47 45  37 39 37  31 33 31  26 28 27  20 24 24  17 21 21
+-15 18 18  13 16 16  12 15 15  12 14 14  11 13 13  11 13 13
+-10 13 13  10 13 13  10 13 13  10 13 13  10 13 13  10 13 13
+-10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
+-11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
+-13 16 16  13 16 16  13 16 16  13 16 16  13 17 17  13 17 17
+-14 17 17  14 17 17  14 18 18  23 27 26  41 42 42  41 42 42
+-43 45 43  41 42 42  39 40 39  33 36 34  27 29 28  23 24 24
+-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  27 29 28  168 163 120  210 208 158
+-251 251 187  251 251 187  210 208 158  137 133 100  1 1 1  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  60 60 56
+-110 109 94  105 104 92  105 104 92  84 83 72  65 66 61  51 52 50
+-40 43 41  33 36 34  27 30 29  23 25 24  18 22 22  16 19 19
+-14 17 17  12 15 15  11 14 14  11 14 14  10 13 13  10 13 13
+-10 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+-10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
+-11 13 13  11 14 14  11 14 14  11 14 14  11 14 14  12 15 15
+-12 15 15  12 15 15  12 15 15  13 16 16  13 16 16  13 16 16
+-13 17 17  13 17 17  14 17 17  32 34 33  43 45 43  43 45 43
+-43 45 43  43 45 43  39 40 39  33 36 34  27 29 28  23 24 24
+-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  1 1 1  68 70 65  184 179 149  210 208 158  251 251 187
+-251 251 187  214 212 158  184 179 149  37 39 37  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  105 104 92
+-105 104 92  105 104 92  99 98 80  72 73 67  58 59 55  46 47 45
+-35 37 36  30 32 31  25 27 26  20 23 23  16 19 19  14 17 17
+-12 15 15  12 14 14  11 13 13  10 13 13  10 12 12  10 12 12
+-10 12 12  10 12 12  9 12 12  9 12 12  9 12 12  9 12 12
+-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 13 13
+-10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
+-11 14 14  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
+-13 16 16  13 16 16  17 20 20  41 42 42  46 47 45  46 47 45
+-46 47 45  43 45 43  40 41 39  33 36 34  27 29 28  23 24 24
+-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-15 15 15  110 109 94  197 193 154  214 212 158  251 251 187  251 251 187
+-239 239 170  184 179 149  84 83 72  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  47 48 46  105 104 92
+-105 104 92  99 98 80  84 83 72  68 70 65  51 52 50  40 43 41
+-32 34 33  27 29 28  22 24 23  17 21 21  15 18 18  13 16 16
+-12 15 15  11 13 13  10 13 13  10 12 12  9 12 12  9 12 12
+-9 12 12  9 12 12  9 11 11  9 11 11  9 11 11  9 11 11
+-9 12 12  9 12 12  9 12 12  9 12 12  10 12 12  10 12 12
+-10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
+-11 14 14  11 14 14  11 14 14  12 14 14  12 15 15  12 15 15
+-12 15 15  13 16 16  28 31 30  43 45 43  47 48 46  47 48 46
+-47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
+-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  3 4 4  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  60 60 56
+-177 172 135  197 193 154  251 251 187  251 251 187  251 251 187  251 251 187
+-184 179 149  110 109 94  3 4 4  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  1 1 1  99 98 80  105 104 92
+-99 98 80  87 86 72  84 83 72  63 64 60  46 47 45  35 37 36
+-30 32 31  25 27 26  18 22 22  16 19 19  14 17 17  12 15 15
+-11 14 14  10 13 13  9 12 12  9 12 12  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 12 12  9 12 12
+-9 12 12  10 12 12  10 12 12  10 12 12  10 13 13  10 13 13
+-10 13 13  11 13 13  11 14 14  11 14 14  11 14 14  12 15 15
+-12 15 15  14 17 17  41 42 42  47 48 46  49 51 48  51 52 50
+-47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
+-19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  23 24 24  137 133 100  184 179 149
+-210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  184 179 149
+-110 109 94  13 13 13  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  30 32 31  105 104 92  99 98 80
+-84 83 72  84 83 72  72 73 67  55 57 54  41 42 42  32 34 33
+-27 29 28  20 24 24  17 20 20  14 17 17  13 16 16  12 14 14
+-10 13 13  10 12 12  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 12 12  9 12 12  10 12 12  10 12 12  10 12 12
+-10 13 13  10 13 13  10 13 13  11 13 13  11 14 14  11 14 14
+-11 14 14  27 29 28  55 56 53  72 73 67  51 52 50  51 52 50
+-49 51 48  43 45 43  39 40 39  32 34 33  26 28 27  21 22 21
+-19 20 19  16 16 16  18 19 17  13 13 13  12 12 12  12 12 12
+-12 12 12  12 12 12  1 1 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  8 8 7  84 83 72  184 179 149  197 193 154  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  184 179 149  145 141 105
+-19 20 19  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  14 14 13  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  72 73 67  105 104 92  84 83 72
+-72 73 67  84 83 72  68 70 65  49 51 48  39 40 39  30 32 31
+-25 27 26  18 22 22  15 18 18  13 16 16  12 15 15  11 13 13
+-10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 12 12  9 12 12  9 12 12
+-10 12 12  10 12 12  10 12 12  10 13 13  10 13 13  11 13 13
+-13 16 16  41 42 42  99 98 80  158 153 112  65 66 61  51 52 50
+-49 51 48  43 45 43  39 40 39  31 33 31  25 27 26  21 22 21
+-21 22 21  68 70 65  55 56 53  13 13 13  12 12 12  12 12 12
+-12 12 12  11 11 11  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
+-63 64 60  158 153 112  184 179 149  210 208 158  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  184 179 149  137 133 100  27 29 28
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-21 22 21  110 109 94  5 6 5  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  13 13 13  105 104 92  90 89 73  72 73 67
+-68 70 65  84 83 72  63 64 60  46 47 45  35 37 36  27 29 28
+-22 24 23  17 20 20  14 17 17  12 15 15  11 14 14  10 12 12
+-10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 12 12  9 12 12  10 12 12  10 12 12  10 13 13  10 13 13
+-30 32 31  47 48 46  177 172 135  210 208 158  137 133 100  55 56 53
+-49 51 48  43 45 43  38 39 37  31 33 31  25 27 26  22 24 23
+-110 109 94  184 179 149  63 64 60  13 13 13  12 12 12  12 12 12
+-12 12 12  8 9 9  0 0 0  1 1 1  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  21 22 21  105 104 92
+-184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  251 251 187  184 179 149  145 141 105  23 24 24  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-68 70 65  184 179 149  105 104 92  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  51 52 50  99 98 80  84 83 72  63 64 60
+-68 70 65  72 73 67  55 57 54  41 42 42  32 34 33  25 27 26
+-20 23 23  16 19 19  13 16 16  12 14 14  10 13 13  10 12 12
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 12 12  9 12 12  10 12 12  17 20 20
+-46 47 45  72 73 67  210 208 158  251 251 187  210 208 158  63 64 60
+-49 51 48  43 45 43  37 39 37  30 32 31  24 26 24  105 104 92
+-210 208 158  197 193 154  47 48 46  13 13 13  12 12 12  12 12 12
+-12 12 12  6 7 7  33 36 34  48 49 45  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  8 8 7  23 24 24  55 56 53  110 109 94
+-210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  184 179 149  110 109 94  20 20 20  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-110 109 94  251 251 187  210 208 158  47 48 46  0 0 0  0 0 0
+-0 0 0  1 1 1  90 89 73  90 89 73  72 73 67  55 56 53
+-72 73 67  68 70 65  51 52 50  37 39 37  28 31 30  23 25 24
+-17 21 21  15 18 18  12 15 15  11 14 14  10 13 13  9 12 12
+-9 11 11  9 11 11  9 11 11  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  9 12 12  13 16 16  41 42 42
+-49 51 48  110 109 94  251 251 187  251 251 187  251 251 187  105 104 92
+-49 51 48  43 45 43  35 37 36  30 31 28  47 48 46  197 193 154
+-251 251 187  197 193 154  31 33 31  12 12 12  12 12 12  12 12 12
+-12 12 12  51 52 50  184 179 149  72 73 67  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 2
+-11 11 11  21 22 21  30 32 31  40 41 39  60 60 56  145 141 105
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+-184 179 149  110 109 94  13 13 13  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  4 5 4  61 61 53  48 49 45  3 4 3
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-156 151 111  251 251 187  251 251 187  184 179 149  11 11 11  0 0 0
+-0 0 0  26 28 27  99 98 80  84 83 72  60 60 56  43 45 43
+-72 73 67  65 66 61  49 51 48  35 37 36  27 29 28  20 24 24
+-17 20 20  14 17 17  12 15 15  11 13 13  10 12 12  9 11 11
+-9 11 11  9 11 11  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
+-9 11 11  9 11 11  9 11 11  11 13 13  37 39 37  47 48 46
+-51 52 50  184 179 149  251 251 187  251 251 187  251 251 187  145 141 105
+-47 48 46  41 42 42  35 37 36  27 29 28  137 133 100  251 251 187
+-251 251 187  197 193 154  19 20 19  12 12 12  12 12 12  12 12 12
+-27 29 28  184 179 149  214 212 158  63 64 60  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 1  6 7 7  16 16 16  24 26 24
+-30 32 31  38 39 37  47 48 46  55 57 54  68 70 65  110 109 94
+-197 193 154  251 251 187  251 251 187  251 251 187  210 208 158  184 179 149
+-105 104 92  8 8 7  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  65 66 61  184 179 149  156 151 111
+-30 32 31  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-168 163 120  251 251 187  251 251 187  251 251 187  110 109 94  0 0 0
+-0 0 0  60 60 56  84 83 72  68 70 65  51 52 50  38 39 37
+-84 83 72  63 64 60  43 45 43  33 36 34  25 27 26  20 23 22
+-15 18 18  13 16 16  12 14 14  10 13 13  9 12 12  9 11 11
+-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-9 11 11  9 11 11  10 12 12  33 36 34  46 47 45  51 52 50
+-72 73 67  210 208 158  251 251 187  251 251 187  251 251 187  177 172 135
+-47 48 46  41 42 42  35 37 36  37 39 37  184 179 149  251 251 187
+-251 251 187  197 193 154  13 13 13  12 12 12  12 12 12  12 12 12
+-110 109 94  251 251 187  251 251 187  37 39 37  0 0 0  0 0 0
+-0 0 0  21 22 20  2 2 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-4 5 5  12 12 12  21 22 21  25 27 26  30 32 31  38 39 37
+-46 47 45  55 56 53  60 60 56  65 66 61  68 70 65  105 104 92
+-110 109 94  197 193 154  210 208 158  197 193 154  184 179 149  84 83 72
+-2 2 2  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  13 13 13  184 179 149  251 251 187
+-197 193 154  43 44 41  0 0 0  0 0 0  0 0 0  0 0 0
+-145 141 105  251 251 187  251 251 187  251 251 187  214 212 158  43 45 43
+-2 2 2  84 83 72  72 73 67  58 59 55  41 42 42  38 39 37
+-72 73 67  58 59 55  41 42 42  31 33 31  25 27 26  18 22 22
+-14 17 17  12 15 15  12 14 14  10 12 12  9 12 12  9 11 11
+-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  9 12 12  31 33 31  43 45 43  49 51 48  55 56 53
+-110 109 94  251 251 187  251 251 187  251 251 187  251 251 187  168 163 120
+-47 48 46  41 42 42  33 36 34  63 64 60  197 193 154  251 251 187
+-251 251 187  184 179 149  13 13 13  12 12 12  12 12 12  16 16 16
+-197 193 154  251 251 187  239 239 170  20 20 20  0 0 0  2 2 1
+-108 107 93  110 109 94  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 1  4 5 5  11 11 11  18 19 18
+-22 24 23  26 28 27  32 34 33  39 40 39  46 47 45  51 52 50
+-55 57 54  60 60 56  63 64 60  63 64 60  63 64 60  58 59 55
+-63 64 60  99 98 80  145 141 105  137 133 100  43 45 43  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  3 4 3  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  110 109 94  251 251 187
+-251 251 187  184 179 149  25 27 26  0 0 0  0 0 0  0 0 0
+-99 98 80  251 251 187  251 251 187  251 251 187  251 251 187  156 151 111
+-25 27 26  84 83 72  65 66 61  47 48 46  32 34 33  39 40 39
+-72 73 67  55 57 54  40 41 39  30 32 31  23 25 24  18 22 22
+-14 17 17  12 15 15  11 13 13  10 12 12  9 11 11  9 11 11
+-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-9 11 11  28 31 30  41 42 42  47 48 46  55 56 53  58 59 55
+-137 133 100  251 251 187  251 251 187  251 251 187  210 208 158  137 133 100
+-47 48 46  40 41 39  32 34 33  75 75 61  184 179 149  239 239 170
+-251 251 187  177 172 135  13 13 13  12 12 12  12 12 12  43 44 41
+-197 193 154  251 251 187  210 208 158  10 10 9  0 0 0  84 83 72
+-251 251 187  84 83 72  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+-6 7 7  11 11 11  17 17 17  20 20 20  23 24 24  27 29 28
+-32 34 33  38 39 37  43 45 43  47 48 46  51 52 50  55 56 53
+-58 59 55  58 59 55  55 57 54  55 56 53  47 48 46  41 42 42
+-35 37 36  31 33 31  47 48 46  14 14 13  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  66 65 55  99 98 80  20 20 20
+-0 0 0  0 0 0  0 0 0  0 0 0  43 45 43  214 212 158
+-251 251 187  251 251 187  145 141 105  3 3 3  0 0 0  0 0 0
+-48 49 45  184 179 149  239 239 170  251 251 187  239 239 170  177 172 135
+-84 83 72  72 73 67  55 56 53  39 40 39  26 28 27  39 40 39
+-68 70 65  51 52 50  39 40 39  28 31 30  22 24 23  17 20 20
+-14 17 17  12 14 14  10 13 13  9 11 11  9 11 11  9 11 11
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-27 29 28  40 41 39  46 47 45  51 52 50  55 57 54  63 64 60
+-131 127 93  197 193 154  210 208 158  197 193 154  168 163 120  96 95 69
+-47 48 46  40 41 39  32 34 33  71 71 57  145 141 105  184 179 149
+-184 179 149  131 127 93  13 13 13  12 12 12  12 12 12  48 49 45
+-168 163 120  184 179 149  156 151 111  6 7 7  14 14 13  177 172 135
+-239 239 170  40 41 39  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  3 3 3  6 7 7  11 11 11  16 16 16
+-18 19 18  21 22 21  23 24 24  27 29 28  32 34 33  37 39 37
+-41 42 42  43 45 43  47 48 46  51 52 50  51 52 50  51 52 50
+-51 52 50  49 51 48  46 47 45  40 41 39  32 34 33  25 27 26
+-20 20 20  14 14 13  2 2 2  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  33 36 34  197 193 154  184 179 149
+-41 42 42  0 0 0  0 0 0  0 0 0  3 3 3  184 179 149
+-251 251 187  251 251 187  184 179 149  48 49 45  0 0 0  0 0 0
+-16 17 12  121 119 87  177 172 135  194 189 146  188 184 146  145 141 105
+-82 81 62  63 64 60  46 47 45  31 33 31  21 22 21  35 37 36
+-68 70 65  51 52 50  37 39 37  27 30 29  22 24 23  17 20 20
+-13 16 16  12 14 14  10 13 13  9 11 11  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  25 27 26
+-38 39 37  43 45 43  51 52 50  55 56 53  60 60 56  63 64 60
+-92 91 72  158 153 112  176 171 126  171 165 117  149 143 98  82 81 62
+-44 46 43  38 39 37  30 32 31  71 71 57  131 127 93  160 154 106
+-149 143 98  82 81 62  13 13 13  12 12 12  12 12 12  46 47 43
+-121 119 87  134 131 96  96 95 69  7 7 6  38 39 37  131 127 93
+-145 141 105  12 13 12  0 0 0  1 1 1  3 3 3  6 7 7
+-10 10 9  12 12 12  14 14 13  16 16 16  18 19 18  21 22 21
+-22 24 23  26 28 27  30 31 28  33 36 34  37 39 37  40 41 39
+-41 42 42  43 45 43  46 47 45  46 47 45  46 47 45  43 45 43
+-41 42 42  37 39 37  31 33 31  26 28 27  21 22 21  16 16 16
+-6 7 7  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  177 172 135  251 251 187
+-197 193 154  27 29 28  0 0 0  0 0 0  0 0 0  110 109 94
+-239 239 170  239 239 170  184 179 149  87 86 72  2 2 1  0 0 0
+-1 1 1  82 81 62  142 137 94  165 161 109  165 161 109  131 127 93
+-75 75 61  55 56 53  37 39 37  25 27 26  19 20 19  32 34 33
+-65 66 61  49 51 48  35 37 36  27 29 28  20 23 23  16 19 19
+-13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+-8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  22 24 23  35 37 36
+-41 42 42  47 48 46  55 56 53  58 59 55  63 64 60  65 66 61
+-71 71 57  131 127 93  160 154 106  160 154 106  142 137 94  82 81 62
+-46 47 43  40 41 39  33 36 34  66 65 55  125 122 87  149 143 98
+-142 137 94  82 81 62  17 17 17  18 19 17  14 14 13  46 47 43
+-118 116 76  125 122 87  96 95 69  16 17 12  71 71 57  103 101 77
+-82 81 62  11 11 11  11 11 11  13 13 13  14 14 13  14 14 13
+-15 15 15  16 16 16  17 17 17  19 20 19  21 22 21  23 24 24
+-26 28 27  27 29 28  31 33 31  33 36 34  35 37 36  38 39 37
+-39 40 39  39 40 39  38 39 37  37 39 37  35 37 36  31 33 31
+-27 29 28  24 26 24  21 22 21  17 17 17  12 12 12  2 2 2
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  68 70 65  251 251 187
+-251 251 187  156 151 111  2 2 1  0 0 0  0 0 0  43 44 41
+-177 172 135  184 179 149  158 153 112  103 101 77  19 20 18  0 0 0
+-0 0 0  46 47 43  131 127 93  160 154 106  160 154 106  131 127 93
+-71 71 57  43 45 43  30 32 31  21 22 21  16 16 16  26 28 27
+-63 64 60  47 48 46  35 37 36  26 28 27  20 23 23  16 19 19
+-13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+-7 9 9  7 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  20 20 20  33 36 34  40 41 39
+-46 47 45  51 52 50  55 57 54  60 60 56  63 64 60  65 66 61
+-66 65 55  118 116 76  151 147 98  165 161 109  151 147 98  121 119 87
+-96 95 69  96 95 69  96 95 69  103 101 77  142 137 94  151 147 98
+-142 137 94  103 101 77  82 81 62  82 81 62  82 81 62  96 95 69
+-131 127 93  142 137 94  103 101 77  46 47 43  96 95 69  118 116 76
+-71 71 57  14 14 13  14 14 13  15 15 15  15 15 15  16 16 16
+-16 16 16  17 17 17  18 19 18  20 20 20  21 22 21  23 24 24
+-25 27 26  27 29 28  30 31 28  30 32 31  31 33 31  31 33 31
+-31 33 31  31 33 31  30 31 28  27 29 28  25 27 26  22 24 23
+-20 20 20  16 16 16  13 13 13  6 7 7  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-58 59 55  68 70 65  8 8 7  0 0 0  10 10 9  210 208 158
+-251 251 187  184 179 149  38 39 37  0 0 0  0 0 0  8 8 7
+-103 101 77  149 143 98  149 143 98  118 116 76  40 41 39  25 27 25
+-53 55 47  82 81 62  144 139 99  165 161 109  165 161 109  142 137 94
+-71 71 57  35 37 36  24 26 24  18 19 18  15 15 15  22 24 23
+-63 64 60  46 47 45  33 36 34  26 28 27  20 23 22  17 18 17
+-12 15 15  11 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+-7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  16 16 16  30 31 28  35 37 36  41 42 42
+-47 48 46  55 56 53  58 59 55  63 64 60  65 66 61  65 66 61
+-61 61 53  103 101 77  151 147 98  171 165 117  171 165 117  168 163 120
+-158 153 112  158 153 112  155 149 109  151 147 98  151 147 98  160 154 106
+-151 147 98  149 143 98  142 137 94  149 143 98  149 143 98  149 143 98
+-155 149 109  151 147 98  131 127 93  103 101 77  125 122 87  118 116 76
+-71 71 57  16 16 16  16 16 16  16 16 16  17 17 17  17 17 17
+-17 17 17  17 17 17  18 19 18  19 20 19  20 20 20  21 22 21
+-23 24 24  24 26 24  25 27 26  26 28 27  26 28 27  26 28 27
+-25 27 26  24 26 24  22 24 23  21 22 21  19 20 19  16 16 16
+-14 14 13  8 8 7  1 1 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-20 20 20  184 179 149  168 163 120  21 22 21  0 0 0  105 104 92
+-177 172 135  145 141 105  71 71 57  0 0 0  0 0 0  0 0 0
+-66 65 55  131 127 93  151 147 98  142 137 94  118 116 76  121 119 87
+-145 141 105  158 153 112  176 171 126  178 174 128  176 171 126  149 145 103
+-96 95 69  31 33 31  21 22 21  16 16 16  14 14 13  18 19 18
+-60 60 56  46 47 45  33 36 34  25 27 26  21 22 21  15 18 18
+-12 15 15  11 13 13  9 11 11  8 10 10  8 10 10  8 9 9
+-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 9 9
+-8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  10 12 12  26 28 27  31 33 31  38 39 37  43 45 43
+-51 52 50  55 56 53  60 60 56  63 64 60  65 66 61  68 70 65
+-63 64 60  96 95 69  158 153 112  178 174 128  188 184 146  194 189 146
+-194 189 146  188 184 146  184 181 136  176 171 126  171 165 117  173 167 111
+-173 167 111  165 161 109  171 165 117  174 170 121  176 171 126  178 174 128
+-178 174 128  174 170 121  160 154 106  149 143 98  149 143 98  125 122 87
+-71 71 57  16 16 16  16 16 16  17 17 17  17 17 17  17 17 17
+-17 17 17  17 17 17  17 17 17  18 19 18  19 20 19  20 20 20
+-21 22 21  21 22 21  21 22 21  22 24 23  21 22 21  21 22 21
+-21 22 21  19 20 19  18 19 18  16 16 16  14 14 13  11 11 11
+-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  105 104 92  197 193 154  110 109 94  9 9 8  36 38 35
+-121 119 87  131 127 93  96 95 69  18 19 17  30 31 28  66 65 55
+-96 95 69  142 137 94  160 154 106  160 154 106  160 154 106  168 163 120
+-184 181 136  194 191 148  197 193 154  197 193 154  194 189 146  168 163 120
+-125 122 87  46 47 43  18 19 18  15 15 15  13 13 13  14 14 13
+-55 57 54  43 45 43  32 34 33  25 27 26  18 22 22  17 17 17
+-12 14 14  10 12 12  9 11 11  8 10 10  8 9 9  7 9 9
+-6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+-7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  32 34 33  41 42 42  35 37 36  39 40 39  37 39 37
+-35 37 36  55 57 54  60 60 56  63 64 60  65 66 61  65 66 61
+-61 63 57  115 113 82  168 163 120  194 191 148  204 201 155  210 208 158
+-210 208 158  210 208 158  197 193 154  194 189 146  186 182 128  176 171 126
+-174 170 121  176 171 126  186 182 128  190 186 136  194 191 148  197 193 154
+-197 193 154  188 184 146  181 176 137  174 170 121  165 161 109  142 137 94
+-82 81 62  24 26 24  16 16 16  16 16 16  16 16 16  16 16 16
+-17 17 17  17 17 17  17 17 17  17 17 17  18 19 18  19 20 19
+-19 20 19  19 20 19  20 20 20  19 20 19  19 20 19  18 19 18
+-17 17 17  15 15 15  13 13 13  12 12 12  6 7 7  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  17 18 17  137 133 100  115 113 82  53 55 47  19 20 18
+-103 101 77  144 139 99  137 133 100  115 113 82  137 133 100  156 151 111
+-158 153 112  164 159 111  171 165 117  174 170 121  178 174 128  194 189 146
+-204 201 155  214 212 158  214 212 158  214 212 158  210 208 158  188 184 146
+-158 153 112  87 86 72  17 17 17  13 13 13  13 13 13  15 15 15
+-55 56 53  43 45 43  32 34 33  24 26 24  17 20 20  16 16 16
+-12 14 14  10 12 12  8 10 10  8 10 10  7 9 9  6 8 8
+-6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
+-7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
+-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+-8 10 10  110 109 94  84 83 72  49 51 48  26 28 27  8 10 10
+-8 9 9  51 52 50  58 59 55  63 64 60  63 64 60  63 64 60
+-66 65 55  134 131 96  181 176 137  210 208 158  214 212 158  239 239 170
+-239 239 170  224 223 159  210 208 158  204 201 155  194 189 146  186 182 128
+-186 182 128  184 181 136  194 189 146  204 201 155  210 208 158  210 208 158
+-210 208 158  210 208 158  197 193 154  190 186 136  176 171 126  155 149 109
+-118 116 76  36 38 35  15 15 15  16 16 16  16 16 16  16 16 16
+-16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  17 17 17
+-17 17 17  17 17 17  17 17 17  16 16 16  16 16 16  15 15 15
+-13 13 13  12 12 12  8 8 7  2 2 2  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  53 55 47  103 101 77  96 95 69  53 55 47
+-103 101 77  158 153 112  177 172 135  184 179 149  188 184 146  197 193 154
+-194 189 146  190 186 136  184 181 136  184 181 136  194 189 146  210 208 158
+-214 212 158  239 239 170  251 251 187  251 251 187  224 223 159  204 201 155
+-177 172 135  121 119 87  30 31 28  13 13 13  12 12 12  39 40 39
+-60 60 56  43 45 43  32 34 33  23 25 24  18 19 18  13 16 16
+-13 13 13  9 11 11  8 10 10  8 9 9  6 8 8  6 8 8
+-6 8 8  6 8 8  6 8 8  6 8 8  6 8 8  7 9 9
+-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+-7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+-14 17 17  197 193 154  158 153 112  55 57 54  7 9 9  7 9 9
+-8 10 10  51 52 50  58 59 55  60 60 56  63 64 60  63 64 60
+-71 71 57  155 149 109  194 191 148  214 212 158  251 251 187  251 251 187
+-251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  190 186 136
+-190 186 136  194 189 146  204 201 155  210 208 158  224 223 159  239 239 170
+-239 239 170  224 223 159  210 208 158  204 201 155  190 186 136  164 159 111
+-125 122 87  40 41 39  15 15 15  15 15 15  15 15 15  15 15 15
+-16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  16 16 16
+-16 16 16  16 16 16  15 15 15  14 14 13  13 13 13  12 12 12
+-8 9 9  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  21 22 20  96 95 69  125 122 87  121 119 87
+-144 139 99  177 172 135  197 193 154  210 208 158  214 212 158  214 212 158
+-210 208 158  204 201 155  194 191 148  194 189 146  204 201 155  214 212 158
+-239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+-188 184 146  145 141 105  53 55 47  12 12 12  15 15 15  63 64 60
+-63 64 60  41 42 42  31 33 31  23 24 24  17 18 17  12 15 15
+-11 13 13  9 11 11  8 9 9  7 9 9  6 8 8  6 8 8
+-6 7 7  6 7 7  6 8 8  6 8 8  6 8 8  6 8 8
+-6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 8 7
+-43 45 43  251 251 187  156 151 111  8 10 10  7 9 9  7 9 9
+-21 22 21  51 52 50  55 56 53  55 57 54  58 59 55  58 59 55
+-75 75 61  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  214 212 158  204 201 155  194 189 146
+-190 186 136  197 193 154  210 208 158  224 223 159  251 251 187  251 251 187
+-251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  176 171 126
+-125 122 87  36 38 35  14 14 13  14 14 13  15 15 15  15 15 15
+-15 15 15  15 15 15  15 15 15  15 15 15  15 15 15  15 15 15
+-15 15 15  14 14 13  13 13 13  12 12 12  10 10 9  3 4 4
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  7 7 5  71 71 57  131 127 93  158 153 112
+-177 172 135  197 193 154  214 212 158  239 239 170  251 251 187  251 251 187
+-238 237 168  210 208 158  204 201 155  197 193 154  204 201 155  214 212 158
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+-197 193 154  156 151 111  66 65 55  12 12 12  37 39 37  58 59 55
+-58 59 55  41 42 42  31 33 31  22 24 23  17 17 17  12 14 14
+-10 12 12  8 10 10  6 8 8  6 8 8  6 7 7  6 7 7
+-6 7 7  5 7 7  6 7 7  6 7 7  6 8 8  6 8 8
+-6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
+-7 9 9  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
+-61 63 57  197 193 154  16 19 19  6 8 8  6 8 8  8 9 9
+-41 42 42  47 48 46  51 52 50  51 52 50  55 56 53  55 56 53
+-71 71 57  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
+-251 251 187  251 251 187  239 239 170  214 212 158  204 201 155  194 189 146
+-190 186 136  197 193 154  210 208 158  239 239 170  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  224 223 159  204 201 155  177 172 135
+-121 119 87  30 31 28  13 13 13  14 14 13  14 14 13  14 14 13
+-14 14 13  14 14 13  15 15 15  15 15 15  14 14 13  13 13 13
+-12 12 12  12 12 12  10 10 9  4 5 5  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  48 49 45  131 127 93  174 170 121
+-194 189 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
+-251 251 187  214 212 158  204 201 155  197 193 154  204 201 155  210 208 158
+-239 239 170  251 251 187  251 251 187  251 251 187  239 239 170  214 212 158
+-194 191 148  156 151 111  71 71 57  19 20 19  51 52 50  51 52 50
+-51 52 50  41 42 42  30 32 31  21 22 21  17 17 17  13 13 13
+-9 11 11  8 9 9  6 8 8  6 7 7  6 7 7  5 7 7
+-5 6 5  5 6 5  5 7 7  5 7 7  6 7 7  6 7 7
+-6 8 8  6 8 8  6 8 8  6 7 7  6 7 7  6 7 7
+-6 7 7  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
+-55 56 53  43 45 43  6 8 8  6 8 8  6 8 8  47 48 46
+-60 60 56  47 48 46  46 47 45  47 48 46  38 39 37  10 12 12
+-66 65 55  145 141 105  197 193 154  214 212 158  251 251 187  251 251 187
+-251 251 187  251 251 187  224 223 159  210 208 158  194 191 148  184 181 136
+-184 181 136  194 189 146  204 201 155  224 223 159  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  181 176 137
+-115 113 82  21 22 20  13 13 13  13 13 13  13 13 13  13 13 13
+-14 14 13  13 13 13  13 13 13  13 13 13  12 12 12  11 11 11
+-10 10 9  6 7 7  1 1 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  2 2 1  66 65 55  144 139 99  178 174 128
+-204 201 155  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  214 212 158  204 201 155  194 191 148  197 193 154  204 201 155
+-214 212 158  239 239 170  239 239 170  239 239 170  214 212 158  210 208 158
+-184 181 136  149 145 103  66 65 55  41 42 42  47 48 46  46 47 45
+-43 45 43  39 40 39  28 31 30  21 22 21  16 16 16  10 12 12
+-8 10 10  6 8 8  6 7 7  6 7 7  5 6 5  5 6 5
+-5 6 5  5 6 5  5 6 5  5 6 5  5 7 7  5 7 7
+-6 7 7  6 7 7  6 7 7  5 7 7  5 7 7  5 7 7
+-5 7 7  6 7 7  6 7 7  6 7 7  6 7 7  6 8 8
+-6 8 8  6 8 8  6 7 7  6 7 7  46 47 45  156 151 111
+-105 104 92  58 59 55  43 45 43  32 34 33  6 8 8  6 8 8
+-49 51 48  125 122 87  181 176 137  204 201 155  214 212 158  239 239 170
+-239 239 170  214 212 158  210 208 158  197 193 154  181 176 137  176 171 126
+-176 171 126  184 181 136  197 193 154  210 208 158  239 239 170  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
+-99 98 80  13 13 13  12 12 12  12 12 12  13 13 13  12 12 12
+-12 12 12  12 12 12  11 11 11  11 11 11  8 9 9  4 5 5
+-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  1 1 0  61 61 53  142 137 94  181 176 137
+-204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
+-251 251 187  214 212 158  197 193 154  190 186 136  184 181 136  188 184 146
+-197 193 154  204 201 155  210 208 158  210 208 158  204 201 155  194 189 146
+-176 171 126  134 131 96  66 65 55  43 45 43  41 42 42  39 40 39
+-35 37 36  33 36 34  27 29 28  20 20 20  15 15 15  9 11 11
+-8 9 9  6 7 7  5 6 5  5 6 5  4 5 5  4 5 5
+-4 5 5  4 5 5  4 5 5  4 5 5  5 6 5  4 5 5
+-4 5 5  5 6 5  4 5 5  5 6 5  5 6 5  5 6 5
+-5 7 7  5 7 7  5 7 7  5 7 7  5 7 7  5 7 7
+-6 7 7  6 7 7  6 7 7  28 31 30  184 179 149  184 179 149
+-145 141 105  84 83 72  27 29 28  5 7 7  5 6 5  16 16 16
+-43 44 41  96 95 69  158 153 112  188 184 146  204 201 155  210 208 158
+-204 201 155  197 193 154  184 179 149  177 172 135  168 163 120  164 159 111
+-164 159 111  174 170 121  184 181 136  197 193 154  214 212 158  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
+-71 71 57  11 11 11  12 12 12  11 11 11  11 11 11  11 11 11
+-10 10 9  10 10 9  8 8 7  3 4 4  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  31 33 31  121 119 87  176 171 126
+-197 193 154  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
+-239 239 170  210 208 158  194 189 146  178 174 128  174 170 121  176 171 126
+-177 172 135  181 176 137  184 179 149  184 179 149  181 176 137  178 174 128
+-158 153 112  121 119 87  53 55 47  37 39 37  33 36 34  30 32 31
+-27 29 28  25 27 26  24 26 24  19 20 19  13 13 13  8 10 10
+-6 8 8  6 7 7  5 6 5  4 5 5  4 5 5  4 5 5
+-4 5 5  4 5 5  4 5 5  3 4 4  3 4 4  4 5 5
+-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+-5 6 5  5 6 5  5 6 5  5 6 5  5 6 5  5 6 5
+-5 6 5  5 6 5  12 14 14  145 141 105  184 179 149  177 172 135
+-90 89 73  21 22 21  5 6 5  5 6 5  4 5 5  37 39 37
+-38 39 37  61 61 53  134 131 96  168 163 120  184 181 136  188 184 146
+-184 179 149  177 172 135  168 163 120  164 159 111  155 149 109  151 147 98
+-151 147 98  164 159 111  176 171 126  184 179 149  210 208 158  239 239 170
+-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  158 153 112
+-46 47 43  10 10 9  10 10 9  10 10 9  8 9 9  8 9 9
+-6 7 7  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  13 12 7  82 81 62  158 153 112
+-188 184 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
+-224 223 159  204 201 155  184 181 136  171 165 117  164 159 111  160 154 106
+-158 153 112  164 159 111  168 163 120  168 163 120  168 163 120  164 159 111
+-142 137 94  96 95 69  43 44 41  27 29 28  26 28 27  23 24 24
+-21 22 21  18 19 18  17 17 17  18 19 18  13 13 13  8 8 7
+-6 7 7  5 6 5  4 5 5  3 4 4  3 4 4  3 4 4
+-3 4 4  3 4 4  3 3 3  3 3 3  3 4 4  3 4 4
+-3 4 4  3 4 4  4 5 5  4 5 5  4 5 5  4 5 5
+-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+-4 5 5  4 5 5  4 5 5  4 5 5  31 33 31  65 66 61
+-37 39 37  38 39 37  96 95 69  144 139 99  168 163 120  174 170 121
+-168 163 120  164 159 111  155 149 109  149 145 103  149 143 98  142 137 94
+-149 143 98  151 147 98  164 159 111  177 172 135  197 193 154  210 208 158
+-251 251 187  251 251 187  251 251 187  239 239 170  197 193 154  137 133 100
+-24 26 24  8 9 9  8 9 9  8 8 7  6 7 7  2 2 2
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  46 47 43  125 122 87
+-176 171 126  197 193 154  210 208 158  239 239 170  251 251 187  239 239 170
+-214 212 158  197 193 154  181 176 137  164 159 111  151 147 98  149 143 98
+-149 143 98  149 143 98  149 145 103  155 149 109  160 154 106  149 143 98
+-118 116 76  82 81 62  30 31 28  21 22 21  19 20 19  17 17 17
+-14 14 13  12 12 12  10 10 9  12 12 12  10 12 12  6 8 8
+-4 5 5  3 4 4  3 4 4  3 4 4  3 3 3  3 3 3
+-3 3 3  3 3 3  3 3 3  3 3 3  2 3 3  2 3 3
+-3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  4 5 5
+-4 5 5  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
+-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+-4 5 5  3 4 4  3 4 4  23 24 24  110 109 94  72 73 67
+-39 40 39  22 24 23  46 47 43  103 101 77  142 137 94  155 149 109
+-160 154 106  155 149 109  149 143 98  142 137 94  142 137 94  142 137 94
+-142 137 94  149 143 98  155 149 109  176 171 126  184 179 149  210 208 158
+-239 239 170  251 251 187  251 251 187  214 212 158  184 179 149  105 104 92
+-10 10 9  6 7 7  3 4 4  1 1 1  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  12 12 9  82 81 62
+-149 145 103  181 176 137  197 193 154  210 208 158  214 212 158  214 212 158
+-210 208 158  197 193 154  177 172 135  158 153 112  149 143 98  142 137 94
+-142 137 94  142 137 94  149 143 98  151 147 98  151 147 98  131 127 93
+-103 101 77  71 71 57  22 24 23  15 15 15  13 13 13  11 11 11
+-8 9 9  6 7 7  6 7 7  4 5 5  8 9 9  6 7 7
+-4 5 5  3 3 3  3 3 3  3 3 3  3 3 3  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 3 3
+-2 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
+-3 4 4  3 4 4  3 3 3  3 4 4  3 4 4  3 4 4
+-3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
+-3 4 4  3 4 4  21 22 21  145 141 105  145 141 105  72 73 67
+-17 18 17  3 4 4  21 22 20  66 65 55  118 116 76  142 137 94
+-149 143 98  151 147 98  149 143 98  142 137 94  142 137 94  142 137 94
+-142 137 94  149 143 98  155 149 109  168 163 120  184 179 149  210 208 158
+-239 239 170  251 251 187  251 251 187  210 208 158  177 172 135  71 71 57
+-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
+-115 113 82  158 153 112  181 176 137  197 193 154  204 201 155  210 208 158
+-204 201 155  188 184 146  177 172 135  164 159 111  149 145 103  142 137 94
+-142 137 94  142 137 94  149 143 98  151 147 98  149 143 98  125 122 87
+-96 95 69  61 61 53  16 17 12  8 9 9  8 8 7  6 7 7
+-4 5 5  3 4 4  3 3 3  3 3 3  3 3 3  5 6 5
+-3 4 4  2 3 3  2 2 2  2 2 2  2 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  1 2 2
+-2 2 2  2 2 2  2 3 3  2 3 3  2 3 3  2 3 3
+-3 3 3  3 3 3  3 3 3  3 3 3  3 3 3  3 3 3
+-3 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
+-3 4 4  3 4 4  3 4 4  8 9 9  8 8 7  3 3 3
+-3 3 3  3 3 3  9 9 8  36 38 35  82 81 62  118 116 76
+-142 137 94  151 147 98  151 147 98  151 147 98  149 143 98  149 143 98
+-149 143 98  151 147 98  160 154 106  176 171 126  188 184 146  210 208 158
+-239 239 170  251 251 187  239 239 170  210 208 158  156 151 111  31 33 31
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
+-66 65 55  125 122 87  158 153 112  181 176 137  194 189 146  197 193 154
+-197 193 154  184 179 149  177 172 135  168 163 120  156 151 111  151 147 98
+-151 147 98  151 147 98  151 147 98  161 156 96  149 143 98  118 116 76
+-82 81 62  53 55 47  12 12 9  4 5 5  3 4 4  3 3 3
+-3 3 3  3 3 3  2 2 2  2 2 2  1 1 1  1 2 2
+-3 3 3  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
+-1 2 2  1 2 2  1 2 2  2 2 2  2 2 2  2 3 3
+-2 3 3  2 3 3  2 3 3  2 3 3  2 2 2  2 2 2
+-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
+-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  3 3 3
+-3 3 3  3 3 3  72 73 67  61 61 53  53 55 47  96 95 69
+-131 127 93  151 147 98  161 156 96  161 156 96  151 147 98  151 147 98
+-161 156 96  160 154 106  164 159 111  177 172 135  197 193 154  210 208 158
+-239 239 170  251 251 187  224 223 159  197 193 154  131 127 93  9 9 8
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-24 26 24  82 81 62  131 127 93  164 159 111  178 174 128  188 184 146
+-188 184 146  188 184 146  181 176 137  176 171 126  168 163 120  164 159 111
+-160 154 106  160 154 106  160 154 106  160 154 106  151 147 98  125 122 87
+-82 81 62  61 61 53  12 12 9  3 3 3  3 3 3  2 2 2
+-2 2 2  1 1 1  1 1 1  1 1 1  0 0 0  0 0 0
+-0 0 0  2 2 2  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 2 2  1 2 2  1 2 2  1 2 2
+-1 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
+-2 3 3  30 32 31  72 73 67  31 33 31  36 38 35  82 81 62
+-118 116 76  149 143 98  161 156 96  161 156 96  161 156 96  160 154 106
+-165 161 109  165 161 109  176 171 126  188 184 146  204 201 155  214 212 158
+-239 239 170  239 239 170  214 212 158  184 179 149  82 81 62  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-2 2 2  43 44 41  96 95 69  131 127 93  160 154 106  176 171 126
+-184 181 136  184 181 136  184 181 136  181 176 137  178 174 128  174 170 121
+-171 165 117  173 167 111  173 167 111  173 167 111  160 154 106  131 127 93
+-96 95 69  66 65 55  16 17 12  2 2 2  1 1 1  1 1 1
+-1 1 1  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  10 9 6  30 31 28  71 71 57
+-118 116 76  149 143 98  165 161 109  165 161 109  165 161 109  173 167 111
+-173 167 111  176 171 126  184 181 136  197 193 154  210 208 158  224 223 159
+-251 251 187  239 239 170  210 208 158  168 163 120  40 41 39  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  13 12 7  61 61 53  96 95 69  131 127 93  160 154 106
+-176 171 126  184 181 136  184 181 136  188 184 146  184 181 136  184 181 136
+-184 181 136  186 182 128  186 182 128  178 174 128  174 170 121  149 145 103
+-118 116 76  82 81 62  21 22 20  1 1 1  1 1 1  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 2 2
+-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+-2 2 2  2 2 2  2 2 2  3 3 3  30 31 28  66 65 55
+-118 116 76  149 143 98  165 161 109  173 167 111  173 167 111  174 170 121
+-186 182 128  190 186 136  197 193 154  210 208 158  224 223 159  251 251 187
+-251 251 187  239 239 170  197 193 154  137 133 100  12 12 9  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  30 31 28  71 71 57  103 101 77  134 131 96
+-164 159 111  176 171 126  184 181 136  188 184 146  194 189 146  197 193 154
+-197 193 154  197 193 154  194 191 148  194 189 146  190 186 136  176 171 126
+-145 141 105  103 101 77  40 41 39  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
+-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  1 2 2
+-1 2 2  1 2 2  1 2 2  1 2 2  30 31 28  71 71 57
+-118 116 76  160 154 106  173 167 111  178 174 128  186 182 128  190 186 136
+-194 191 148  204 201 155  210 208 158  224 223 159  251 251 187  251 251 187
+-251 251 187  214 212 158  184 179 149  84 83 72  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  5 5 3  43 44 41  82 81 62  103 101 77
+-142 137 94  165 161 109  178 174 128  190 186 136  197 193 154  204 201 155
+-210 208 158  210 208 158  210 208 158  210 208 158  210 208 158  197 193 154
+-177 172 135  145 141 105  79 78 62  5 4 3  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 2 2  1 2 2  30 31 28  82 81 62
+-142 137 94  165 161 109  178 174 128  190 186 136  194 191 148  204 201 155
+-210 208 158  214 212 158  239 239 170  251 251 187  251 251 187  251 251 187
+-251 251 187  210 208 158  168 163 120  36 38 35  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  16 17 12  53 55 47  82 81 62
+-118 116 76  151 147 98  171 165 117  184 181 136  194 191 148  210 208 158
+-214 212 158  224 223 159  239 239 170  239 239 170  224 223 159  214 212 158
+-197 193 154  176 171 126  115 113 82  24 26 24  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  40 41 39  103 101 77
+-151 147 98  176 171 126  190 186 136  197 193 154  210 208 158  214 212 158
+-239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-239 239 170  197 193 154  110 109 94  3 4 3  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  30 31 28  66 65 55
+-96 95 69  125 122 87  160 154 106  178 174 128  194 189 146  204 201 155
+-214 212 158  239 239 170  251 251 187  251 251 187  251 251 187  239 239 170
+-210 208 158  188 184 146  149 145 103  61 61 53  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  61 61 53  131 127 93
+-164 159 111  184 181 136  197 193 154  210 208 158  224 223 159  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+-210 208 158  168 163 120  43 44 41  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  4 3 2  36 38 35
+-71 71 57  96 95 69  142 137 94  165 161 109  184 181 136  197 193 154
+-210 208 158  239 239 170  251 251 187  251 251 187  251 251 187  251 251 187
+-214 212 158  197 193 154  168 163 120  103 101 77  7 7 5  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-1 1 1  0 0 0  0 0 0  0 0 0  82 81 62  142 137 94
+-174 170 121  194 189 146  210 208 158  224 223 159  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  224 223 159
+-184 179 149  99 98 80  3 3 3  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
+-43 44 41  82 81 62  118 116 76  142 137 94  171 165 117  190 186 136
+-204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
+-214 212 158  197 193 154  174 170 121  125 122 87  30 31 28  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  3 4 3  82 81 62  149 143 98
+-176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  251 251 187  239 239 170  204 201 155
+-145 141 105  30 31 28  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-10 9 6  46 47 43  82 81 62  118 116 76  149 143 98  174 170 121
+-194 189 146  210 208 158  224 223 159  251 251 187  251 251 187  224 223 159
+-210 208 158  194 191 148  174 170 121  134 131 96  53 55 47  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
+-176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
+-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  177 172 135
+-75 75 61  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  10 9 6  46 47 43  82 81 62  118 116 76  149 143 98
+-176 171 126  194 191 148  210 208 158  214 212 158  214 212 158  210 208 158
+-197 193 154  184 181 136  164 159 111  131 127 93  53 55 47  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
+-174 170 121  194 189 146  204 201 155  214 212 158  239 239 170  251 251 187
+-251 251 187  251 251 187  239 239 170  210 208 158  184 179 149  110 109 94
+-12 12 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  10 9 6  43 44 41  82 81 62  115 113 82
+-144 139 99  168 163 120  188 184 146  197 193 154  197 193 154  194 189 146
+-184 181 136  174 170 121  151 147 98  118 116 76  36 38 35  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  4 3 2  82 81 62  142 137 94
+-171 165 117  186 182 128  194 191 148  210 208 158  214 212 158  224 223 159
+-239 239 170  224 223 159  210 208 158  184 179 149  137 133 100  36 38 35
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  7 7 5  36 38 35  71 71 57
+-103 101 77  131 127 93  155 149 109  168 163 120  168 163 120  168 163 120
+-164 159 111  149 143 98  125 122 87  82 81 62  13 12 7  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  61 61 53  125 122 87
+-160 154 106  174 170 121  184 181 136  194 189 146  204 201 155  210 208 158
+-210 208 158  204 201 155  184 179 149  145 141 105  61 61 53  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  3 3 2  30 31 28
+-61 61 53  82 81 62  103 101 77  121 119 87  125 122 87  125 122 87
+-118 116 76  103 101 77  79 78 62  24 26 24  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  25 27 25  96 95 69
+-142 137 94  160 154 106  171 165 117  178 174 128  184 181 136  184 181 136
+-181 176 137  177 172 135  145 141 105  75 75 61  5 5 3  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-16 17 12  40 41 39  61 61 53  71 71 57  71 71 57  71 71 57
+-66 65 55  43 44 41  12 12 9  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  46 47 43
+-96 95 69  125 122 87  142 137 94  149 145 103  155 149 109  155 149 109
+-145 141 105  121 119 87  66 65 55  7 7 5  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  1 1 1  16 17 12  24 26 24  25 27 25  19 20 18
+-7 7 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 1
+-25 27 25  61 61 53  82 81 62  96 95 69  96 95 69  82 81 62
+-61 61 53  25 27 25  2 2 1  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  5 6 5  13 12 7  10 9 6  3 4 3
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6   6   6   6  10  10  10  10  10  10
++ 10  10  10   6   6   6   6   6   6   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  10  10  10  14  14  14
++ 22  22  22  26  26  26  30  30  30  34  34  34
++ 30  30  30  30  30  30  26  26  26  18  18  18
++ 14  14  14  10  10  10   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  14  14  14  26  26  26  42  42  42
++ 54  54  54  66  66  66  78  78  78  78  78  78
++ 78  78  78  74  74  74  66  66  66  54  54  54
++ 42  42  42  26  26  26  18  18  18  10  10  10
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 22  22  22  42  42  42  66  66  66  86  86  86
++ 66  66  66  38  38  38  38  38  38  22  22  22
++ 26  26  26  34  34  34  54  54  54  66  66  66
++ 86  86  86  70  70  70  46  46  46  26  26  26
++ 14  14  14   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  10  10  10  26  26  26
++ 50  50  50  82  82  82  58  58  58   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  6   6   6  54  54  54  86  86  86  66  66  66
++ 38  38  38  18  18  18   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  22  22  22  50  50  50
++ 78  78  78  34  34  34   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   6   6   6  70  70  70
++ 78  78  78  46  46  46  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  18  18  18  42  42  42  82  82  82
++ 26  26  26   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  14  14  14
++ 46  46  46  34  34  34   6   6   6   2   2   6
++ 42  42  42  78  78  78  42  42  42  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   0   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 10  10  10  30  30  30  66  66  66  58  58  58
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  26  26  26
++ 86  86  86 101 101 101  46  46  46  10  10  10
++  2   2   6  58  58  58  70  70  70  34  34  34
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 14  14  14  42  42  42  86  86  86  10  10  10
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  30  30  30
++ 94  94  94  94  94  94  58  58  58  26  26  26
++  2   2   6   6   6   6  78  78  78  54  54  54
++ 22  22  22   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 22  22  22  62  62  62  62  62  62   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  26  26  26
++ 54  54  54  38  38  38  18  18  18  10  10  10
++  2   2   6   2   2   6  34  34  34  82  82  82
++ 38  38  38  14  14  14   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 30  30  30  78  78  78  30  30  30   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  10  10  10
++ 10  10  10   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  78  78  78
++ 50  50  50  18  18  18   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 38  38  38  86  86  86  14  14  14   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  54  54  54
++ 66  66  66  26  26  26   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 42  42  42  82  82  82   2   2   6   2   2   6
++  2   2   6   6   6   6  10  10  10   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   6   6   6
++ 14  14  14  10  10  10   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  18  18  18
++ 82  82  82  34  34  34  10  10  10   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 46  46  46  86  86  86   2   2   6   2   2   6
++  6   6   6   6   6   6  22  22  22  34  34  34
++  6   6   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  18  18  18  34  34  34
++ 10  10  10  50  50  50  22  22  22   2   2   6
++  2   2   6   2   2   6   2   2   6  10  10  10
++ 86  86  86  42  42  42  14  14  14   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 46  46  46  86  86  86   2   2   6   2   2   6
++ 38  38  38 116 116 116  94  94  94  22  22  22
++ 22  22  22   2   2   6   2   2   6   2   2   6
++ 14  14  14  86  86  86 138 138 138 162 162 162
++154 154 154  38  38  38  26  26  26   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 86  86  86  46  46  46  14  14  14   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 46  46  46  86  86  86   2   2   6  14  14  14
++134 134 134 198 198 198 195 195 195 116 116 116
++ 10  10  10   2   2   6   2   2   6   6   6   6
++101  98  89 187 187 187 210 210 210 218 218 218
++214 214 214 134 134 134  14  14  14   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 86  86  86  50  50  50  18  18  18   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   1   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 46  46  46  86  86  86   2   2   6  54  54  54
++218 218 218 195 195 195 226 226 226 246 246 246
++ 58  58  58   2   2   6   2   2   6  30  30  30
++210 210 210 253 253 253 174 174 174 123 123 123
++221 221 221 234 234 234  74  74  74   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 70  70  70  58  58  58  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 46  46  46  82  82  82   2   2   6 106 106 106
++170 170 170  26  26  26  86  86  86 226 226 226
++123 123 123  10  10  10  14  14  14  46  46  46
++231 231 231 190 190 190   6   6   6  70  70  70
++ 90  90  90 238 238 238 158 158 158   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 70  70  70  58  58  58  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   1   0   0   0
++  0   0   1   0   0   1   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 42  42  42  86  86  86   6   6   6 116 116 116
++106 106 106   6   6   6  70  70  70 149 149 149
++128 128 128  18  18  18  38  38  38  54  54  54
++221 221 221 106 106 106   2   2   6  14  14  14
++ 46  46  46 190 190 190 198 198 198   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 74  74  74  62  62  62  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   1   0   0   0
++  0   0   1   0   0   0   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 42  42  42  94  94  94  14  14  14 101 101 101
++128 128 128   2   2   6  18  18  18 116 116 116
++118  98  46 121  92   8 121  92   8  98  78  10
++162 162 162 106 106 106   2   2   6   2   2   6
++  2   2   6 195 195 195 195 195 195   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 74  74  74  62  62  62  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   1   0   0   1
++  0   0   1   0   0   0   0   0   1   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 38  38  38  90  90  90  14  14  14  58  58  58
++210 210 210  26  26  26  54  38   6 154 114  10
++226 170  11 236 186  11 225 175  15 184 144  12
++215 174  15 175 146  61  37  26   9   2   2   6
++ 70  70  70 246 246 246 138 138 138   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 70  70  70  66  66  66  26  26  26   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 38  38  38  86  86  86  14  14  14  10  10  10
++195 195 195 188 164 115 192 133   9 225 175  15
++239 182  13 234 190  10 232 195  16 232 200  30
++245 207  45 241 208  19 232 195  16 184 144  12
++218 194 134 211 206 186  42  42  42   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 50  50  50  74  74  74  30  30  30   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 34  34  34  86  86  86  14  14  14   2   2   6
++121  87  25 192 133   9 219 162  10 239 182  13
++236 186  11 232 195  16 241 208  19 244 214  54
++246 218  60 246 218  38 246 215  20 241 208  19
++241 208  19 226 184  13 121  87  25   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 50  50  50  82  82  82  34  34  34  10  10  10
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 34  34  34  82  82  82  30  30  30  61  42   6
++180 123   7 206 145  10 230 174  11 239 182  13
++234 190  10 238 202  15 241 208  19 246 218  74
++246 218  38 246 215  20 246 215  20 246 215  20
++226 184  13 215 174  15 184 144  12   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 26  26  26  94  94  94  42  42  42  14  14  14
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  78  78  78  50  50  50 104  69   6
++192 133   9 216 158  10 236 178  12 236 186  11
++232 195  16 241 208  19 244 214  54 245 215  43
++246 215  20 246 215  20 241 208  19 198 155  10
++200 144  11 216 158  10 156 118  10   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  6   6   6  90  90  90  54  54  54  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  78  78  78  46  46  46  22  22  22
++137  92   6 210 162  10 239 182  13 238 190  10
++238 202  15 241 208  19 246 215  20 246 215  20
++241 208  19 203 166  17 185 133  11 210 150  10
++216 158  10 210 150  10 102  78  10   2   2   6
++  6   6   6  54  54  54  14  14  14   2   2   6
++  2   2   6  62  62  62  74  74  74  30  30  30
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 34  34  34  78  78  78  50  50  50   6   6   6
++ 94  70  30 139 102  15 190 146  13 226 184  13
++232 200  30 232 195  16 215 174  15 190 146  13
++168 122  10 192 133   9 210 150  10 213 154  11
++202 150  34 182 157 106 101  98  89   2   2   6
++  2   2   6  78  78  78 116 116 116  58  58  58
++  2   2   6  22  22  22  90  90  90  46  46  46
++ 18  18  18   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 38  38  38  86  86  86  50  50  50   6   6   6
++128 128 128 174 154 114 156 107  11 168 122  10
++198 155  10 184 144  12 197 138  11 200 144  11
++206 145  10 206 145  10 197 138  11 188 164 115
++195 195 195 198 198 198 174 174 174  14  14  14
++  2   2   6  22  22  22 116 116 116 116 116 116
++ 22  22  22   2   2   6  74  74  74  70  70  70
++ 30  30  30  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 50  50  50 101 101 101  26  26  26  10  10  10
++138 138 138 190 190 190 174 154 114 156 107  11
++197 138  11 200 144  11 197 138  11 192 133   9
++180 123   7 190 142  34 190 178 144 187 187 187
++202 202 202 221 221 221 214 214 214  66  66  66
++  2   2   6   2   2   6  50  50  50  62  62  62
++  6   6   6   2   2   6  10  10  10  90  90  90
++ 50  50  50  18  18  18   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  10  10  10  34  34  34
++ 74  74  74  74  74  74   2   2   6   6   6   6
++144 144 144 198 198 198 190 190 190 178 166 146
++154 121  60 156 107  11 156 107  11 168 124  44
++174 154 114 187 187 187 190 190 190 210 210 210
++246 246 246 253 253 253 253 253 253 182 182 182
++  6   6   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  62  62  62
++ 74  74  74  34  34  34  14  14  14   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  10  10  10  22  22  22  54  54  54
++ 94  94  94  18  18  18   2   2   6  46  46  46
++234 234 234 221 221 221 190 190 190 190 190 190
++190 190 190 187 187 187 187 187 187 190 190 190
++190 190 190 195 195 195 214 214 214 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++ 82  82  82   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  14  14  14
++ 86  86  86  54  54  54  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  18  18  18  46  46  46  90  90  90
++ 46  46  46  18  18  18   6   6   6 182 182 182
++253 253 253 246 246 246 206 206 206 190 190 190
++190 190 190 190 190 190 190 190 190 190 190 190
++206 206 206 231 231 231 250 250 250 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++202 202 202  14  14  14   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 42  42  42  86  86  86  42  42  42  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 14  14  14  38  38  38  74  74  74  66  66  66
++  2   2   6   6   6   6  90  90  90 250 250 250
++253 253 253 253 253 253 238 238 238 198 198 198
++190 190 190 190 190 190 195 195 195 221 221 221
++246 246 246 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253  82  82  82   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  78  78  78  70  70  70  34  34  34
++ 14  14  14   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 34  34  34  66  66  66  78  78  78   6   6   6
++  2   2   6  18  18  18 218 218 218 253 253 253
++253 253 253 253 253 253 253 253 253 246 246 246
++226 226 226 231 231 231 246 246 246 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 178 178 178   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  18  18  18  90  90  90  62  62  62
++ 30  30  30  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  10  10  10  26  26  26
++ 58  58  58  90  90  90  18  18  18   2   2   6
++  2   2   6 110 110 110 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++250 250 250 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 231 231 231  18  18  18   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  18  18  18  94  94  94
++ 54  54  54  26  26  26  10  10  10   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  22  22  22  50  50  50
++ 90  90  90  26  26  26   2   2   6   2   2   6
++ 14  14  14 195 195 195 250 250 250 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++250 250 250 242 242 242  54  54  54   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6  38  38  38
++ 86  86  86  50  50  50  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  14  14  14  38  38  38  82  82  82
++ 34  34  34   2   2   6   2   2   6   2   2   6
++ 42  42  42 195 195 195 246 246 246 253 253 253
++253 253 253 253 253 253 253 253 253 250 250 250
++242 242 242 242 242 242 250 250 250 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 250 250 250 246 246 246 238 238 238
++226 226 226 231 231 231 101 101 101   6   6   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 38  38  38  82  82  82  42  42  42  14  14  14
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 10  10  10  26  26  26  62  62  62  66  66  66
++  2   2   6   2   2   6   2   2   6   6   6   6
++ 70  70  70 170 170 170 206 206 206 234 234 234
++246 246 246 250 250 250 250 250 250 238 238 238
++226 226 226 231 231 231 238 238 238 250 250 250
++250 250 250 250 250 250 246 246 246 231 231 231
++214 214 214 206 206 206 202 202 202 202 202 202
++198 198 198 202 202 202 182 182 182  18  18  18
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  62  62  62  66  66  66  30  30  30
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 14  14  14  42  42  42  82  82  82  18  18  18
++  2   2   6   2   2   6   2   2   6  10  10  10
++ 94  94  94 182 182 182 218 218 218 242 242 242
++250 250 250 253 253 253 253 253 253 250 250 250
++234 234 234 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 246 246 246
++238 238 238 226 226 226 210 210 210 202 202 202
++195 195 195 195 195 195 210 210 210 158 158 158
++  6   6   6  14  14  14  50  50  50  14  14  14
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   6   6   6  86  86  86  46  46  46
++ 18  18  18   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 22  22  22  54  54  54  70  70  70   2   2   6
++  2   2   6  10  10  10   2   2   6  22  22  22
++166 166 166 231 231 231 250 250 250 253 253 253
++253 253 253 253 253 253 253 253 253 250 250 250
++242 242 242 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 246 246 246
++231 231 231 206 206 206 198 198 198 226 226 226
++ 94  94  94   2   2   6   6   6   6  38  38  38
++ 30  30  30   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  62  62  62  66  66  66
++ 26  26  26  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  74  74  74  50  50  50   2   2   6
++ 26  26  26  26  26  26   2   2   6 106 106 106
++238 238 238 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 246 246 246 218 218 218 202 202 202
++210 210 210  14  14  14   2   2   6   2   2   6
++ 30  30  30  22  22  22   2   2   6   2   2   6
++  2   2   6   2   2   6  18  18  18  86  86  86
++ 42  42  42  14  14  14   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 42  42  42  90  90  90  22  22  22   2   2   6
++ 42  42  42   2   2   6  18  18  18 218 218 218
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 250 250 250 221 221 221
++218 218 218 101 101 101   2   2   6  14  14  14
++ 18  18  18  38  38  38  10  10  10   2   2   6
++  2   2   6   2   2   6   2   2   6  78  78  78
++ 58  58  58  22  22  22   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 54  54  54  82  82  82   2   2   6  26  26  26
++ 22  22  22   2   2   6 123 123 123 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 250 250 250
++238 238 238 198 198 198   6   6   6  38  38  38
++ 58  58  58  26  26  26  38  38  38   2   2   6
++  2   2   6   2   2   6   2   2   6  46  46  46
++ 78  78  78  30  30  30  10  10  10   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  10  10  10  30  30  30
++ 74  74  74  58  58  58   2   2   6  42  42  42
++  2   2   6  22  22  22 231 231 231 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 250 250 250
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 246 246 246  46  46  46  38  38  38
++ 42  42  42  14  14  14  38  38  38  14  14  14
++  2   2   6   2   2   6   2   2   6   6   6   6
++ 86  86  86  46  46  46  14  14  14   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  14  14  14  42  42  42
++ 90  90  90  18  18  18  18  18  18  26  26  26
++  2   2   6 116 116 116 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 250 250 250 238 238 238
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253  94  94  94   6   6   6
++  2   2   6   2   2   6  10  10  10  34  34  34
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 74  74  74  58  58  58  22  22  22   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  10  10  10  26  26  26  66  66  66
++ 82  82  82   2   2   6  38  38  38   6   6   6
++ 14  14  14 210 210 210 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 246 246 246 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 144 144 144   2   2   6
++  2   2   6   2   2   6   2   2   6  46  46  46
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 42  42  42  74  74  74  30  30  30  10  10  10
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  14  14  14  42  42  42  90  90  90
++ 26  26  26   6   6   6  42  42  42   2   2   6
++ 74  74  74 250 250 250 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 242 242 242 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 182 182 182   2   2   6
++  2   2   6   2   2   6   2   2   6  46  46  46
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 10  10  10  86  86  86  38  38  38  10  10  10
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 10  10  10  26  26  26  66  66  66  82  82  82
++  2   2   6  22  22  22  18  18  18   2   2   6
++149 149 149 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 234 234 234 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 206 206 206   2   2   6
++  2   2   6   2   2   6   2   2   6  38  38  38
++  2   2   6   2   2   6   2   2   6   2   2   6
++  6   6   6  86  86  86  46  46  46  14  14  14
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 18  18  18  46  46  46  86  86  86  18  18  18
++  2   2   6  34  34  34  10  10  10   6   6   6
++210 210 210 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 234 234 234 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 221 221 221   6   6   6
++  2   2   6   2   2   6   6   6   6  30  30  30
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  82  82  82  54  54  54  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 26  26  26  66  66  66  62  62  62   2   2   6
++  2   2   6  38  38  38  10  10  10  26  26  26
++238 238 238 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 238 238 238
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231   6   6   6
++  2   2   6   2   2   6  10  10  10  30  30  30
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  66  66  66  58  58  58  22  22  22
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 38  38  38  78  78  78   6   6   6   2   2   6
++  2   2   6  46  46  46  14  14  14  42  42  42
++246 246 246 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 234 234 234  10  10  10
++  2   2   6   2   2   6  22  22  22  14  14  14
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  66  66  66  62  62  62  22  22  22
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 50  50  50  74  74  74   2   2   6   2   2   6
++ 14  14  14  70  70  70  34  34  34  62  62  62
++250 250 250 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 246 246 246
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 234 234 234  14  14  14
++  2   2   6   2   2   6  30  30  30   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  66  66  66  62  62  62  22  22  22
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 54  54  54  62  62  62   2   2   6   2   2   6
++  2   2   6  30  30  30  46  46  46  70  70  70
++250 250 250 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 246 246 246
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 226 226 226  10  10  10
++  2   2   6   6   6   6  30  30  30   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6  66  66  66  58  58  58  22  22  22
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  22  22  22
++ 58  58  58  62  62  62   2   2   6   2   2   6
++  2   2   6   2   2   6  30  30  30  78  78  78
++250 250 250 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 246 246 246
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 206 206 206   2   2   6
++ 22  22  22  34  34  34  18  14   6  22  22  22
++ 26  26  26  18  18  18   6   6   6   2   2   6
++  2   2   6  82  82  82  54  54  54  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  26  26  26
++ 62  62  62 106 106 106  74  54  14 185 133  11
++210 162  10 121  92   8   6   6   6  62  62  62
++238 238 238 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 246 246 246
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 158 158 158  18  18  18
++ 14  14  14   2   2   6   2   2   6   2   2   6
++  6   6   6  18  18  18  66  66  66  38  38  38
++  6   6   6  94  94  94  50  50  50  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 10  10  10  10  10  10  18  18  18  38  38  38
++ 78  78  78 142 134 106 216 158  10 242 186  14
++246 190  14 246 190  14 156 118  10  10  10  10
++ 90  90  90 238 238 238 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 250 250 250
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 246 230 190
++238 204  91 238 204  91 181 142  44  37  26   9
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  38  38  38  46  46  46
++ 26  26  26 106 106 106  54  54  54  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  14  14  14  22  22  22
++ 30  30  30  38  38  38  50  50  50  70  70  70
++106 106 106 190 142  34 226 170  11 242 186  14
++246 190  14 246 190  14 246 190  14 154 114  10
++  6   6   6  74  74  74 226 226 226 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 231 231 231 250 250 250
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 228 184  62
++241 196  14 241 208  19 232 195  16  38  30  10
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   6   6   6  30  30  30  26  26  26
++203 166  17 154 142  90  66  66  66  26  26  26
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  18  18  18  38  38  38  58  58  58
++ 78  78  78  86  86  86 101 101 101 123 123 123
++175 146  61 210 150  10 234 174  13 246 186  14
++246 190  14 246 190  14 246 190  14 238 190  10
++102  78  10   2   2   6  46  46  46 198 198 198
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 234 234 234 242 242 242
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 224 178  62
++242 186  14 241 196  14 210 166  10  22  18   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   6   6   6 121  92   8
++238 202  15 232 195  16  82  82  82  34  34  34
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 14  14  14  38  38  38  70  70  70 154 122  46
++190 142  34 200 144  11 197 138  11 197 138  11
++213 154  11 226 170  11 242 186  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++225 175  15  46  32   6   2   2   6  22  22  22
++158 158 158 250 250 250 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 250 250 250 242 242 242 224 178  62
++239 182  13 236 186  11 213 154  11  46  32   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  61  42   6 225 175  15
++238 190  10 236 186  11 112 100  78  42  42  42
++ 14  14  14   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 22  22  22  54  54  54 154 122  46 213 154  11
++226 170  11 230 174  11 226 170  11 226 170  11
++236 178  12 242 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++241 196  14 184 144  12  10  10  10   2   2   6
++  6   6   6 116 116 116 242 242 242 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 231 231 231 198 198 198 214 170  54
++236 178  12 236 178  12 210 150  10 137  92   6
++ 18  14   6   2   2   6   2   2   6   2   2   6
++  6   6   6  70  47   6 200 144  11 236 178  12
++239 182  13 239 182  13 124 112  88  58  58  58
++ 22  22  22   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  70  70  70 180 133  36 226 170  11
++239 182  13 242 186  14 242 186  14 246 186  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 232 195  16  98  70   6   2   2   6
++  2   2   6   2   2   6  66  66  66 221 221 221
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 206 206 206 198 198 198 214 166  58
++230 174  11 230 174  11 216 158  10 192 133   9
++163 110   8 116  81   8 102  78  10 116  81   8
++167 114   7 197 138  11 226 170  11 239 182  13
++242 186  14 242 186  14 162 146  94  78  78  78
++ 34  34  34  14  14  14   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 30  30  30  78  78  78 190 142  34 226 170  11
++239 182  13 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 241 196  14 203 166  17  22  18   6
++  2   2   6   2   2   6   2   2   6  38  38  38
++218 218 218 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++250 250 250 206 206 206 198 198 198 202 162  69
++226 170  11 236 178  12 224 166  10 210 150  10
++200 144  11 197 138  11 192 133   9 197 138  11
++210 150  10 226 170  11 242 186  14 246 190  14
++246 190  14 246 186  14 225 175  15 124 112  88
++ 62  62  62  30  30  30  14  14  14   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  78  78  78 174 135  50 224 166  10
++239 182  13 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 241 196  14 139 102  15
++  2   2   6   2   2   6   2   2   6   2   2   6
++ 78  78  78 250 250 250 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++250 250 250 214 214 214 198 198 198 190 150  46
++219 162  10 236 178  12 234 174  13 224 166  10
++216 158  10 213 154  11 213 154  11 216 158  10
++226 170  11 239 182  13 246 190  14 246 190  14
++246 190  14 246 190  14 242 186  14 206 162  42
++101 101 101  58  58  58  30  30  30  14  14  14
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  74  74  74 174 135  50 216 158  10
++236 178  12 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 241 196  14 226 184  13
++ 61  42   6   2   2   6   2   2   6   2   2   6
++ 22  22  22 238 238 238 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 226 226 226 187 187 187 180 133  36
++216 158  10 236 178  12 239 182  13 236 178  12
++230 174  11 226 170  11 226 170  11 230 174  11
++236 178  12 242 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 186  14 239 182  13
++206 162  42 106 106 106  66  66  66  34  34  34
++ 14  14  14   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 26  26  26  70  70  70 163 133  67 213 154  11
++236 178  12 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 241 196  14
++190 146  13  18  14   6   2   2   6   2   2   6
++ 46  46  46 246 246 246 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 221 221 221  86  86  86 156 107  11
++216 158  10 236 178  12 242 186  14 246 186  14
++242 186  14 239 182  13 239 182  13 242 186  14
++242 186  14 246 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++242 186  14 225 175  15 142 122  72  66  66  66
++ 30  30  30  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 26  26  26  70  70  70 163 133  67 210 150  10
++236 178  12 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++232 195  16 121  92   8  34  34  34 106 106 106
++221 221 221 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++242 242 242  82  82  82  18  14   6 163 110   8
++216 158  10 236 178  12 242 186  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 242 186  14 163 133  67
++ 46  46  46  18  18  18   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  10  10  10
++ 30  30  30  78  78  78 163 133  67 210 150  10
++236 178  12 246 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++241 196  14 215 174  15 190 178 144 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 218 218 218
++ 58  58  58   2   2   6  22  18   6 167 114   7
++216 158  10 236 178  12 246 186  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 186  14 242 186  14 190 150  46
++ 54  54  54  22  22  22   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 38  38  38  86  86  86 180 133  36 213 154  11
++236 178  12 246 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 232 195  16 190 146  13 214 214 214
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 250 250 250 170 170 170  26  26  26
++  2   2   6   2   2   6  37  26   9 163 110   8
++219 162  10 239 182  13 246 186  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 186  14 236 178  12 224 166  10 142 122  72
++ 46  46  46  18  18  18   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 50  50  50 109 106  95 192 133   9 224 166  10
++242 186  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++242 186  14 226 184  13 210 162  10 142 110  46
++226 226 226 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++253 253 253 253 253 253 253 253 253 253 253 253
++198 198 198  66  66  66   2   2   6   2   2   6
++  2   2   6   2   2   6  50  34   6 156 107  11
++219 162  10 239 182  13 246 186  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 242 186  14
++234 174  13 213 154  11 154 122  46  66  66  66
++ 30  30  30  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  22  22  22
++ 58  58  58 154 121  60 206 145  10 234 174  13
++242 186  14 246 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 186  14 236 178  12 210 162  10 163 110   8
++ 61  42   6 138 138 138 218 218 218 250 250 250
++253 253 253 253 253 253 253 253 253 250 250 250
++242 242 242 210 210 210 144 144 144  66  66  66
++  6   6   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6  61  42   6 163 110   8
++216 158  10 236 178  12 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 239 182  13 230 174  11 216 158  10
++190 142  34 124 112  88  70  70  70  38  38  38
++ 18  18  18   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  22  22  22
++ 62  62  62 168 124  44 206 145  10 224 166  10
++236 178  12 239 182  13 242 186  14 242 186  14
++246 186  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 236 178  12 216 158  10 175 118   6
++ 80  54   7   2   2   6   6   6   6  30  30  30
++ 54  54  54  62  62  62  50  50  50  38  38  38
++ 14  14  14   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   6   6   6  80  54   7 167 114   7
++213 154  11 236 178  12 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 190  14 242 186  14 239 182  13 239 182  13
++230 174  11 210 150  10 174 135  50 124 112  88
++ 82  82  82  54  54  54  34  34  34  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  18  18  18
++ 50  50  50 158 118  36 192 133   9 200 144  11
++216 158  10 219 162  10 224 166  10 226 170  11
++230 174  11 236 178  12 239 182  13 239 182  13
++242 186  14 246 186  14 246 190  14 246 190  14
++246 190  14 246 190  14 246 190  14 246 190  14
++246 186  14 230 174  11 210 150  10 163 110   8
++104  69   6  10  10  10   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   6   6   6  91  60   6 167 114   7
++206 145  10 230 174  11 242 186  14 246 190  14
++246 190  14 246 190  14 246 186  14 242 186  14
++239 182  13 230 174  11 224 166  10 213 154  11
++180 133  36 124 112  88  86  86  86  58  58  58
++ 38  38  38  22  22  22  10  10  10   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  14  14  14
++ 34  34  34  70  70  70 138 110  50 158 118  36
++167 114   7 180 123   7 192 133   9 197 138  11
++200 144  11 206 145  10 213 154  11 219 162  10
++224 166  10 230 174  11 239 182  13 242 186  14
++246 186  14 246 186  14 246 186  14 246 186  14
++239 182  13 216 158  10 185 133  11 152  99   6
++104  69   6  18  14   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   2   2   6   2   2   6   2   2   6
++  2   2   6   6   6   6  80  54   7 152  99   6
++192 133   9 219 162  10 236 178  12 239 182  13
++246 186  14 242 186  14 239 182  13 236 178  12
++224 166  10 206 145  10 192 133   9 154 121  60
++ 94  94  94  62  62  62  42  42  42  22  22  22
++ 14  14  14   6   6   6   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 18  18  18  34  34  34  58  58  58  78  78  78
++101  98  89 124 112  88 142 110  46 156 107  11
++163 110   8 167 114   7 175 118   6 180 123   7
++185 133  11 197 138  11 210 150  10 219 162  10
++226 170  11 236 178  12 236 178  12 234 174  13
++219 162  10 197 138  11 163 110   8 130  83   6
++ 91  60   6  10  10  10   2   2   6   2   2   6
++ 18  18  18  38  38  38  38  38  38  38  38  38
++ 38  38  38  38  38  38  38  38  38  38  38  38
++ 38  38  38  38  38  38  26  26  26   2   2   6
++  2   2   6   6   6   6  70  47   6 137  92   6
++175 118   6 200 144  11 219 162  10 230 174  11
++234 174  13 230 174  11 219 162  10 210 150  10
++192 133   9 163 110   8 124 112  88  82  82  82
++ 50  50  50  30  30  30  14  14  14   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  14  14  14  22  22  22  34  34  34
++ 42  42  42  58  58  58  74  74  74  86  86  86
++101  98  89 122 102  70 130  98  46 121  87  25
++137  92   6 152  99   6 163 110   8 180 123   7
++185 133  11 197 138  11 206 145  10 200 144  11
++180 123   7 156 107  11 130  83   6 104  69   6
++ 50  34   6  54  54  54 110 110 110 101  98  89
++ 86  86  86  82  82  82  78  78  78  78  78  78
++ 78  78  78  78  78  78  78  78  78  78  78  78
++ 78  78  78  82  82  82  86  86  86  94  94  94
++106 106 106 101 101 101  86  66  34 124  80   6
++156 107  11 180 123   7 192 133   9 200 144  11
++206 145  10 200 144  11 192 133   9 175 118   6
++139 102  15 109 106  95  70  70  70  42  42  42
++ 22  22  22  10  10  10   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   6   6   6  10  10  10
++ 14  14  14  22  22  22  30  30  30  38  38  38
++ 50  50  50  62  62  62  74  74  74  90  90  90
++101  98  89 112 100  78 121  87  25 124  80   6
++137  92   6 152  99   6 152  99   6 152  99   6
++138  86   6 124  80   6  98  70   6  86  66  30
++101  98  89  82  82  82  58  58  58  46  46  46
++ 38  38  38  34  34  34  34  34  34  34  34  34
++ 34  34  34  34  34  34  34  34  34  34  34  34
++ 34  34  34  34  34  34  38  38  38  42  42  42
++ 54  54  54  82  82  82  94  86  76  91  60   6
++134  86   6 156 107  11 167 114   7 175 118   6
++175 118   6 167 114   7 152  99   6 121  87  25
++101  98  89  62  62  62  34  34  34  18  18  18
++  6   6   6   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6   6   6   6  10  10  10
++ 18  18  18  22  22  22  30  30  30  42  42  42
++ 50  50  50  66  66  66  86  86  86 101  98  89
++106  86  58  98  70   6 104  69   6 104  69   6
++104  69   6  91  60   6  82  62  34  90  90  90
++ 62  62  62  38  38  38  22  22  22  14  14  14
++ 10  10  10  10  10  10  10  10  10  10  10  10
++ 10  10  10  10  10  10   6   6   6  10  10  10
++ 10  10  10  10  10  10  10  10  10  14  14  14
++ 22  22  22  42  42  42  70  70  70  89  81  66
++ 80  54   7 104  69   6 124  80   6 137  92   6
++134  86   6 116  81   8 100  82  52  86  86  86
++ 58  58  58  30  30  30  14  14  14   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  10  10  10  14  14  14
++ 18  18  18  26  26  26  38  38  38  54  54  54
++ 70  70  70  86  86  86  94  86  76  89  81  66
++ 89  81  66  86  86  86  74  74  74  50  50  50
++ 30  30  30  14  14  14   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6  18  18  18  34  34  34  58  58  58
++ 82  82  82  89  81  66  89  81  66  89  81  66
++ 94  86  66  94  86  76  74  74  74  50  50  50
++ 26  26  26  14  14  14   6   6   6   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  6   6   6   6   6   6  14  14  14  18  18  18
++ 30  30  30  38  38  38  46  46  46  54  54  54
++ 50  50  50  42  42  42  30  30  30  18  18  18
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   6   6   6  14  14  14  26  26  26
++ 38  38  38  50  50  50  58  58  58  58  58  58
++ 54  54  54  42  42  42  30  30  30  18  18  18
++ 10  10  10   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++  6   6   6  10  10  10  14  14  14  18  18  18
++ 18  18  18  14  14  14  10  10  10   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   6   6   6
++ 14  14  14  18  18  18  22  22  22  22  22  22
++ 18  18  18  14  14  14  10  10  10   6   6   6
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/logo/logo_linux_vga16.ppm linux-2.6.29-rc3.owrt/drivers/video/logo/logo_linux_vga16.ppm
+--- linux-2.6.29.owrt/drivers/video/logo/logo_linux_vga16.ppm  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/logo/logo_linux_vga16.ppm      2009-05-10 23:48:29.000000000 +0200
+@@ -1,2739 +1,1604 @@
+ P3
+-142 114
++# Standard 16-color Linux logo
++80 80
+ 255
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-255 255 85  170 170 170  170 170 170  170 85 0  85 255 85  170 85 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  170 85 0
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  170 170 170
+-170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 255 85
+-255 85 85  85 255 85  170 170 170  170 85 0  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  85 85 85
+-170 170 170  170 85 0  170 170 170  85 85 85  170 85 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
+-85 85 85  85 85 85  170 85 0  85 255 85  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  170 85 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 170 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 85 0  85 255 85  170 85 0  170 85 0  170 85 0  85 255 85
+-170 85 0  170 85 0  0 170 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  170 85 0
+-255 255 85  170 85 0  255 255 85  255 255 85  255 255 85  170 85 0
+-255 255 85  85 255 85  170 85 0  170 85 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+-85 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+-255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  85 255 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
+-255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  170 85 0
+-170 85 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  170 85 0  255 255 85  85 255 85  255 255 85
+-170 170 170  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
+-85 255 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  170 85 0  255 255 85  255 255 85  255 255 85
+-255 255 255  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  255 255 85
+-170 85 0  170 85 0  0 170 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  170 85 0  85 255 85  255 255 85  170 170 170  255 255 255
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
+-255 255 85  85 255 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  255 255 85  255 255 85  255 255 85  255 255 255  255 255 85
+-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  85 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+-255 255 85  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-170 85 0  170 85 0  255 255 85  255 255 85  255 255 255  170 170 170
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+-255 255 85  85 255 85  170 85 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-255 255 85  85 255 85  255 255 85  170 170 170  255 255 255  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  85 255 85  170 85 0
+-255 255 85  170 85 0  170 85 0  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+-85 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 170 0
+-170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  85 255 85  255 255 85  170 85 0  170 85 0
+-170 85 0  85 255 85  255 255 85  85 85 85  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  85 255 85  170 170 170  170 170 170
+-85 85 85  170 170 170  170 170 170  170 85 0  170 170 170  170 170 170
+-85 255 85  170 170 170  170 85 0  170 170 170  85 255 85  255 85 85
+-85 255 85  170 170 170  255 255 85  85 85 85  255 255 85  170 170 170
+-85 255 85  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 255  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  170 85 0  0 170 0  85 85 85
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 255 85
+-255 85 85  85 255 85  85 85 85  255 85 85  85 85 85  170 170 170
+-170 85 0  170 170 170  85 85 85  85 255 85  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-170 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+-170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  85 85 85  85 85 85
+-255 255 85  170 170 170  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  170 170 170  170 85 0  170 170 170
+-170 170 170  255 255 85  170 170 170  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  170 85 0  170 85 0  0 170 0
+-0 0 0  170 85 0  170 85 0  0 170 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
+-170 170 170  85 85 85  85 85 85  170 170 170  170 85 0  85 85 85
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+-255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+-170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
+-170 85 0  255 255 85  170 85 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+-85 255 85  170 85 0  0 170 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 170 0  170 85 0  255 255 85
+-85 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
+-85 255 85  170 85 0  170 85 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  170 85 0
+-255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+-170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
+-255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  85 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  170 85 0
+-0 170 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+-255 255 85  85 255 85  170 85 0  170 85 0  85 255 85  170 85 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  85 255 85
+-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
+-255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  255 255 85
+-170 85 0  170 85 0  85 255 85  170 85 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  255 255 85
+-170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
+-255 255 85  85 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+-170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  85 255 85
+-170 85 0  255 255 85  170 85 0  85 255 85  170 85 0  170 85 0
+-0 170 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
+-170 170 170  170 170 170  85 85 85  85 85 85  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 255 85  255 255 85
+-170 85 0  255 255 85  255 255 85  170 85 0  85 255 85  170 85 0
+-255 255 85  170 85 0  0 170 0  170 85 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  170 85 0
+-0 170 0  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-255 255 85  255 255 85  170 85 0  0 170 0  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  85 85 85
+-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  170 85 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-170 170 170  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+-170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
+-255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+-255 255 255  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
+-255 255 255  170 170 170  255 255 255  255 255 255  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+-255 255 255  255 255 255  170 170 170  255 255 255  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  170 170 170
+-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  170 170 170
+-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-170 170 170  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  170 170 170  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  255 255 255  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
+-170 170 170  255 255 255  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+-255 255 255  255 255 255  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  255 255 255
+-255 255 255  170 170 170  170 170 170  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  255 255 255  255 255 255  255 255 255
+-170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+-170 170 170  170 170 170  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+-170 170 170  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  170 170 170
+-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
+-255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  170 170 170  255 255 255  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+-255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  170 170 170  255 255 255  170 170 170  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  255 255 255  255 255 255  255 255 255  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
+-255 255 255  170 170 170  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+-170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-170 170 170  255 255 255  255 255 255  170 170 170  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  255 255 255
+-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-170 170 170  255 255 255  255 255 255  255 255 255  85 85 85  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
+-255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  255 255 255  255 255 255  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
+-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  255 255 255  255 255 255  255 255 255  255 255 255  0 0 0
+-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  255 255 255
+-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-170 170 170  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  170 170 170  85 85 85  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
+-170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  255 255 255  255 255 255  0 0 0  0 0 0  85 85 85
+-255 255 255  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
+-255 255 255  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  85 85 85
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  170 170 170
+-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  170 170 170
+-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
+-255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  170 170 170  255 255 85  85 85 85
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+-85 85 85  170 170 170  170 170 170  170 170 170  170 85 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  170 85 0
+-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-170 85 0  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
+-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
+-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  85 85 85
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  170 85 0  85 255 85  170 85 0  170 170 170  85 85 85
+-85 85 85  0 0 0  0 0 0  85 85 85  170 85 0  85 255 85
+-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-85 85 85  85 85 85  170 85 0  0 0 0  85 85 85  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
+-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  170 170 170  170 85 0  170 170 170  170 85 0
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  255 85 85  170 170 170  85 255 85  170 85 0
+-85 85 85  85 85 85  170 85 0  85 85 85  170 170 170  85 85 85
+-170 170 170  170 85 0  85 85 85  85 85 85  85 85 85  85 85 85
+-170 85 0  85 255 85  85 85 85  85 85 85  85 85 85  170 85 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  170 170 170
+-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 85 0  170 170 170  170 85 0  85 85 85  0 0 0
+-85 85 85  85 85 85  85 255 85  170 170 170  170 170 170  170 85 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  85 255 85  255 85 85  170 170 170  170 170 170
+-170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 85 0
+-170 170 170  85 85 85  85 255 85  170 85 0  170 170 170  170 85 0
+-170 170 170  170 170 170  170 85 0  85 85 85  85 85 85  85 255 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  170 170 170  170 170 170  0 0 0  0 0 0  85 85 85
+-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  255 255 85  85 85 85  85 85 85  85 85 85
+-85 255 85  255 85 85  170 170 170  170 85 0  170 170 170  85 255 85
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  170 85 0  170 170 170  170 170 170  255 255 85
+-170 170 170  255 85 85  170 170 170  170 170 170  255 255 85  170 170 170
+-85 255 85  170 170 170  255 85 85  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  85 85 85
+-85 85 85  170 85 0  85 85 85  0 0 0  85 85 85  85 85 85
+-85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 85 85
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
+-170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 85
+-170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 85 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  170 170 170  85 85 85  85 85 85  0 0 0
+-85 85 85  85 85 85  170 170 170  85 85 85  170 170 170  170 85 0
+-170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 170 170
+-255 255 85  170 170 170  170 170 170  255 255 255  255 255 85  170 170 170
+-255 255 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 255
+-170 170 170  255 255 255  255 255 85  170 170 170  255 255 85  170 170 170
+-255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  255 85 85  170 170 170  170 170 170
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  85 85 85
+-85 85 85  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
+-255 255 85  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+-255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  255 255 255
+-255 255 85  255 255 255  255 255 85  170 170 170  170 170 170  170 85 0
+-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+-255 255 255  255 255 255  255 255 85  255 255 255  255 255 255  170 170 170
+-255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  170 170 170  170 170 170  170 170 170  255 255 255  170 170 170
+-255 255 255  255 255 255  255 255 255  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+-255 255 255  255 255 255  170 170 170  255 255 85  170 170 170  255 255 85
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
+-255 255 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
+-170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  255 255 255
+-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+-85 85 85  170 85 0  255 255 255  170 170 170  255 255 255  255 255 255
+-255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  255 255 85  255 255 255  255 255 255
+-170 170 170  255 255 255  255 255 255  170 170 170  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 255 85  170 170 170
+-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+-255 255 255  255 255 255  255 255 85  170 170 170  170 170 170  255 255 255
+-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  255 255 85
+-170 170 170  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
+-255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  255 255 85
+-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  170 170 170
+-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
+-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-85 85 85  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
+-255 255 255  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
+-255 85 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 170 170
+-255 255 85  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+-255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 85
+-170 170 170  170 85 0  85 85 85  0 0 0  85 85 85  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
+-255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
+-85 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 255  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 85
+-170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+-255 255 255  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  170 170 170  170 170 170  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  85 255 85
+-255 85 85  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
+-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  170 170 170
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+-170 170 170  170 170 170  255 255 85  170 170 170  255 85 85  85 255 85
+-170 170 170  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  85 85 85  85 85 85  85 85 85  170 170 170  255 255 85
+-170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
+-170 170 170  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+-255 255 255  170 170 170  170 170 170  170 85 0  170 170 170  85 85 85
+-170 170 170  170 170 170  170 85 0  170 170 170  170 85 0  85 85 85
+-85 255 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+-170 85 0  170 170 170  85 255 85  170 85 0  170 170 170  85 85 85
+-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
+-255 255 85  255 255 255  170 170 170  170 170 170  170 170 170  170 85 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 170 170
+-170 85 0  170 85 0  170 170 170  85 255 85  85 85 85  170 170 170
+-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  85 85 85
+-170 170 170  170 85 0  170 170 170  85 85 85  170 170 170  170 85 0
+-170 170 170  85 255 85  170 85 0  170 170 170  170 170 170  170 170 170
+-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-170 85 0  170 170 170  255 255 85  170 170 170  255 255 255  170 170 170
+-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
+-170 170 170  85 255 85  170 85 0  170 170 170  170 85 0  85 85 85
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-85 255 85  170 170 170  170 85 0  170 170 170  170 85 0  85 255 85
+-170 170 170  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 255  170 170 170  170 170 170  170 170 170  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 85 0  85 85 85  170 170 170  255 255 85  170 170 170
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
+-170 170 170  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
+-170 85 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 85 0
+-85 85 85  255 85 85  85 255 85  170 85 0  170 170 170  170 170 170
+-170 85 0  170 170 170  85 85 85  255 255 85  170 170 170  170 170 170
+-255 255 255  170 170 170  255 255 255  255 255 85  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  255 255 85  85 85 85  170 170 170
+-85 255 85  255 85 85  170 170 170  85 255 85  255 85 85  85 255 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+-85 85 85  85 255 85  255 85 85  170 170 170  85 255 85  170 85 0
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
+-170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 170 170  85 85 85  255 255 85
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+-85 85 85  255 255 85  170 170 170  170 85 0  170 170 170  85 85 85
+-170 85 0  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 170 170  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
+-170 85 0  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 85  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 85 0
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-170 85 0  85 255 85  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+-255 255 255  170 170 170  255 255 85  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
+-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
+-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
+-170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 255
+-170 170 170  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+-170 85 0  170 170 170  170 85 0  255 255 85  170 170 170  170 170 170
+-170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+-255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+-170 170 170  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  85 85 85
+-170 85 0  85 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+-170 170 170  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-170 85 0  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+-170 170 170  255 255 255  170 170 170  255 255 255  170 170 170  255 255 255
+-255 255 255  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  255 255 255
+-170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 255 85
+-170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  170 85 0  170 170 170  170 170 170
+-255 255 85  170 170 170  255 255 255  255 255 85  255 255 255  255 255 255
+-170 170 170  255 255 85  170 170 170  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+-170 170 170  170 170 170  170 170 170  255 255 255  170 170 170  255 255 255
+-170 170 170  255 255 255  170 170 170  255 255 255  255 255 85  255 255 255
+-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
+-170 170 170  255 255 255  170 170 170  255 255 255  255 255 255  170 170 170
+-255 255 85  170 170 170  170 170 170  170 85 0  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-255 255 85  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
+-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  170 85 0  170 170 170
+-255 255 85  170 170 170  255 255 85  255 255 255  170 170 170  255 255 255
+-170 170 170  170 170 170  170 170 170  170 170 170  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+-170 85 0  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+-255 255 255  255 255 255  170 170 170  255 255 255  255 255 85  170 170 170
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 85  170 170 170  170 85 0  85 255 85  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+-170 170 170  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
+-255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+-170 170 170  170 170 170  170 170 170  170 85 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-255 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+-255 255 255  170 170 170  255 255 85  170 170 170  85 85 85  85 85 85
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  170 170 170
+-170 85 0  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
+-170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-85 85 85  85 85 85  85 85 85  170 85 0  85 85 85  170 85 0
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 85 0
+-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
+-170 170 170  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+-85 85 85  85 255 85  170 85 0  170 170 170  170 85 0  170 170 170
+-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+-0 0 0  0 0 0  0 0 0  0 0 0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85  85  85  85  85  85  85  85  85  85
++ 85  85  85  85  85  85  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++ 85  85  85  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85 170 170 170   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++170 170 170 170 170 170  85  85  85   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170 170 170 170 170 170
++170 170 170   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++ 85  85  85 170 170 170 170 170 170 170 170 170
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 170 170 170 255 255 255 255 255 255
++255 255 255 170 170 170   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++170 170 170 170 170 170 255 255 255 255 255 255
++  0   0   0   0   0   0   0   0   0   0   0   0
++170 170 170 255 255 255 170 170 170 170 170 170
++255 255 255 170 170 170   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++170 170 170   0   0   0   0   0   0 255 255 255
++ 85  85  85   0   0   0   0   0   0   0   0   0
++255 255 255 170 170 170   0   0   0  85  85  85
++170 170 170 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++ 85  85  85   0   0   0   0   0   0 170 170 170
++ 85  85  85   0   0   0   0   0   0   0   0   0
++255 255 255  85  85  85   0   0   0   0   0   0
++ 85  85  85 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++170 170 170   0   0   0   0   0   0 170 170 170
++ 85  85  85  85  85  85  85  85  85  85  85  85
++255 255 255  85  85  85   0   0   0   0   0   0
++ 85  85  85 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++255 255 255   0   0   0   0   0   0 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0   0   0   0   0   0   0
++ 85  85  85 255 255 255   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++170 170 170 170 170 170 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170 170 170 170 170 170   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 170  85   0
++170  85   0 170  85   0  85  85  85   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++ 85  85  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0  85  85  85   0   0   0
++  0   0   0  85  85  85 170 170 170  85  85  85
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++ 85  85  85 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170 170 170 170 170 170 170 170 170   0   0   0
++  0   0   0   0   0   0 170 170 170 170 170 170
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++ 85  85  85 170 170 170 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170 170 170 170 170 170
++170 170 170 170 170 170 170 170 170  85  85  85
++  0   0   0   0   0   0  85  85  85  85  85  85
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++ 85  85  85 170 170 170 170 170 170 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170 170 170 170 170 170 170 170 170 170 170 170
++255 255 255 255 255 255 255 255 255 170 170 170
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0  85  85  85
++255 255 255 255 255 255 170 170 170 170 170 170
++170 170 170 170 170 170 170 170 170 170 170 170
++170 170 170 170 170 170 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0 170 170 170
++255 255 255 255 255 255 170 170 170 170 170 170
++170 170 170 170 170 170 170 170 170 170 170 170
++170 170 170 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0  85  85  85 255 255 255
++255 255 255 255 255 255 255 255 255 170 170 170
++170 170 170 170 170 170 170 170 170 170 170 170
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0  85  85  85 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++ 85  85  85 170 170 170 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85 170 170 170 170 170 170 170 170 170
++255 255 255 255 255 255 255 255 255 170 170 170
++170 170 170 170 170 170 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170 170 170 170 170 170 170 170 170 170
++170 170 170 170 170 170 170 170 170  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++170 170 170 170 170 170 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 170 170 170
++170 170 170 170 170 170 170 170 170  85  85  85
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++170 170 170 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170 170 170 170 170 170 170
++  0   0   0   0   0   0   0   0   0  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++ 85  85  85   0   0   0   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 170 170 170
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0 170 170 170
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++  0   0   0   0   0   0  85  85  85 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170   0   0   0  85  85  85
++ 85  85  85   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++  0   0   0  85  85  85 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170   0   0   0  85  85  85
++ 85  85  85   0   0   0  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0  85  85  85
++  0   0   0 170 170 170 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0  85  85  85   0   0   0
++  0   0   0 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0  85  85  85   0   0   0
++ 85  85  85 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0  85  85  85   0   0   0   0   0   0
++170 170 170 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255   0   0   0
++ 85  85  85  85  85  85  85  85  85  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85   0   0   0 170  85   0
++255 255  85 170  85   0   0   0   0   0   0   0
++ 85  85  85 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0  85  85  85  85  85  85   0   0   0
++  0   0   0  85  85  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0   0   0   0
++  0   0   0  85  85  85 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255  85 170  85   0 255 255  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++  0   0   0   0   0   0  85  85  85 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255  85
++170  85   0 255 255  85 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0   0   0   0   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 170  85   0
++255 255  85 170  85   0 255 255  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++255 255  85 170  85   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85   0   0   0   0   0   0   0   0   0
++ 85  85  85 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255  85
++170  85   0 255 255  85 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0 255 255  85
++170  85   0 255 255  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85   0   0   0   0   0   0
++  0   0   0  85  85  85 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85   0   0   0
++  0   0   0   0   0   0  85  85  85 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170 170 170 170 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170 170 170 170 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170 170 170 170 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170 170 170 170 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85   0   0   0   0   0   0   0   0   0
++ 85  85  85 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 170 170 170  85  85  85 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85  85  85  85  85  85  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170  85  85  85  85  85  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 170 170 170
++ 85  85  85   0   0   0   0   0   0 170  85   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170  85  85  85
++  0   0   0   0   0   0   0   0   0 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170 170 170 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++170 170 170  85  85  85  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 170  85   0
++170  85   0 170 170 170 255 255 255 255 255 255
++255 255 255 255 255 255 255 255 255 255 255 255
++255 255 255 255 255 255 170 170 170  85  85  85
++ 85  85  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85 170  85   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 170  85   0 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0  85  85  85 170  85   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 170  85   0 170  85   0 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++ 85  85  85  85  85  85  85  85  85  85  85  85
++ 85  85  85  85  85  85  85  85  85  85  85  85
++ 85  85  85  85  85  85  85  85  85   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++170  85   0 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 255 255  85 170  85   0
++170  85   0 170  85   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 255 255  85 170  85   0
++255 255  85 170  85   0 170  85   0 170  85   0
++ 85  85  85  85  85  85  85  85  85  85  85  85
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0  85  85  85
++ 85  85  85  85  85  85  85  85  85 170  85   0
++170  85   0 170  85   0 170  85   0 255 255  85
++170  85   0 255 255  85 170  85   0 170  85   0
++170  85   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0 170  85   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++170  85   0 170  85   0 170  85   0 170  85   0
++170  85   0 170  85   0 170  85   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
++  0   0   0   0   0   0   0   0   0   0   0   0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/pxafb.c linux-2.6.29-rc3.owrt/drivers/video/pxafb.c
+--- linux-2.6.29.owrt/drivers/video/pxafb.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/pxafb.c        2009-05-10 23:48:29.000000000 +0200
+@@ -2230,7 +2230,7 @@
+ static struct platform_driver pxafb_driver = {
+       .probe          = pxafb_probe,
+-      .remove         = __devexit_p(pxafb_remove),
++      .remove         = pxafb_remove,
+       .suspend        = pxafb_suspend,
+       .resume         = pxafb_resume,
+       .driver         = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/video/sh_mobile_lcdcfb.c linux-2.6.29-rc3.owrt/drivers/video/sh_mobile_lcdcfb.c
+--- linux-2.6.29.owrt/drivers/video/sh_mobile_lcdcfb.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/video/sh_mobile_lcdcfb.c     2009-05-10 23:48:29.000000000 +0200
+@@ -446,6 +446,7 @@
+ {
+       struct sh_mobile_lcdc_chan *ch;
+       struct sh_mobile_lcdc_board_cfg *board_cfg;
++      unsigned long tmp;
+       int k;
+       /* tell the board code to disable the panel */
+@@ -455,8 +456,9 @@
+               if (board_cfg->display_off)
+                       board_cfg->display_off(board_cfg->board_data);
+-              /* cleanup deferred io if enabled */
+-              if (ch->info.fbdefio) {
++              /* cleanup deferred io if SYS bus */
++              tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
++              if (ch->ldmt1r_value & (1 << 12) && tmp) {
+                       fb_deferred_io_cleanup(&ch->info);
+                       ch->info.fbdefio = NULL;
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/virtio/virtio_pci.c linux-2.6.29-rc3.owrt/drivers/virtio/virtio_pci.c
+--- linux-2.6.29.owrt/drivers/virtio/virtio_pci.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/virtio/virtio_pci.c  2009-05-10 23:48:29.000000000 +0200
+@@ -192,7 +192,7 @@
+               drv = container_of(vp_dev->vdev.dev.driver,
+                                  struct virtio_driver, driver);
+-              if (drv && drv->config_changed)
++              if (drv->config_changed)
+                       drv->config_changed(&vp_dev->vdev);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/w1/masters/w1-gpio.c linux-2.6.29-rc3.owrt/drivers/w1/masters/w1-gpio.c
+--- linux-2.6.29.owrt/drivers/w1/masters/w1-gpio.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/w1/masters/w1-gpio.c 2009-05-10 23:48:29.000000000 +0200
+@@ -39,7 +39,7 @@
+ {
+       struct w1_gpio_platform_data *pdata = data;
+-      return gpio_get_value(pdata->pin) ? 1 : 0;
++      return gpio_get_value(pdata->pin);
+ }
+ static int __init w1_gpio_probe(struct platform_device *pdev)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/w1/slaves/Kconfig linux-2.6.29-rc3.owrt/drivers/w1/slaves/Kconfig
+--- linux-2.6.29.owrt/drivers/w1/slaves/Kconfig        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/w1/slaves/Kconfig    2009-05-10 23:48:29.000000000 +0200
+@@ -16,12 +16,6 @@
+         Say Y here if you want to connect 1-wire
+         simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
+-config W1_SLAVE_DS2431
+-      tristate "1kb EEPROM family support (DS2431)"
+-      help
+-        Say Y here if you want to use a 1-wire
+-        1kb EEPROM family device (DS2431)
+-
+ config W1_SLAVE_DS2433
+       tristate "4kb EEPROM family support (DS2433)"
+       help
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/w1/slaves/Makefile linux-2.6.29-rc3.owrt/drivers/w1/slaves/Makefile
+--- linux-2.6.29.owrt/drivers/w1/slaves/Makefile       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/w1/slaves/Makefile   2009-05-10 23:48:29.000000000 +0200
+@@ -4,7 +4,6 @@
+ obj-$(CONFIG_W1_SLAVE_THERM)  += w1_therm.o
+ obj-$(CONFIG_W1_SLAVE_SMEM)   += w1_smem.o
+-obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
+ obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
+ obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
+ obj-$(CONFIG_W1_SLAVE_BQ27000)        += w1_bq27000.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/w1/slaves/w1_ds2433.c linux-2.6.29-rc3.owrt/drivers/w1/slaves/w1_ds2433.c
+--- linux-2.6.29.owrt/drivers/w1/slaves/w1_ds2433.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/w1/slaves/w1_ds2433.c        2009-05-10 23:48:29.000000000 +0200
+@@ -156,9 +156,6 @@
+  */
+ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
+ {
+-#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+-      struct w1_f23_data *f23 = sl->family_data;
+-#endif
+       u8 wrbuf[4];
+       u8 rdbuf[W1_PAGE_SIZE + 3];
+       u8 es = (addr + len - 1) & 0x1f;
+@@ -199,9 +196,7 @@
+       /* Reset the bus to wake up the EEPROM (this may not be needed) */
+       w1_reset_bus(sl->master);
+-#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+-      f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+-#endif
++
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/w1/slaves/w1_therm.c linux-2.6.29-rc3.owrt/drivers/w1/slaves/w1_therm.c
+--- linux-2.6.29.owrt/drivers/w1/slaves/w1_therm.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/w1/slaves/w1_therm.c 2009-05-10 23:48:29.000000000 +0200
+@@ -115,7 +115,7 @@
+ static inline int w1_DS18B20_convert_temp(u8 rom[9])
+ {
+-      int t = ((s16)rom[1] << 8) | rom[0];
++      s16 t = (rom[1] << 8) | rom[0];
+       t = t*1000/16;
+       return t;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/at91rm9200_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/at91rm9200_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/at91rm9200_wdt.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/at91rm9200_wdt.c    2009-05-10 23:48:29.000000000 +0200
+@@ -107,10 +107,10 @@
+ static int at91_wdt_settimeout(int new_time)
+ {
+       /*
+-       * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
++       * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+        *
+        * Since WDV is a 16-bit counter, the maximum period is
+-       * 65536 / 256 = 256 seconds.
++       * 65536 / 0.256 = 256 seconds.
+        */
+       if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+               return -EINVAL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/at91sam9_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/at91sam9_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/at91sam9_wdt.c  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/at91sam9_wdt.c      2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,6 @@
+ #include <linux/errno.h>
+ #include <linux/fs.h>
+ #include <linux/init.h>
+-#include <linux/io.h>
+ #include <linux/kernel.h>
+ #include <linux/miscdevice.h>
+ #include <linux/module.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/gef_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/gef_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/gef_wdt.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/gef_wdt.c   2009-05-10 23:48:29.000000000 +0200
+@@ -269,7 +269,7 @@
+       bus_clk = 133; /* in MHz */
+       freq = fsl_get_sys_freq();
+-      if (freq != -1)
++      if (freq > 0)
+               bus_clk = freq;
+       /* Map devices registers into memory */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/iTCO_vendor_support.c linux-2.6.29-rc3.owrt/drivers/watchdog/iTCO_vendor_support.c
+--- linux-2.6.29.owrt/drivers/watchdog/iTCO_vendor_support.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/iTCO_vendor_support.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  *    intel TCO vendor specific watchdog driver support
+  *
+- *    (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
++ *    (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+  *
+  *    This program is free software; you can redistribute it and/or
+  *    modify it under the terms of the GNU General Public License
+@@ -19,7 +19,7 @@
+ /* Module and version information */
+ #define DRV_NAME      "iTCO_vendor_support"
+-#define DRV_VERSION   "1.03"
++#define DRV_VERSION   "1.02"
+ #define PFX           DRV_NAME ": "
+ /* Includes */
+@@ -77,26 +77,6 @@
+  *        20.6 seconds.
+  */
+-static void supermicro_old_pre_start(unsigned long acpibase)
+-{
+-      unsigned long val32;
+-
+-      /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+-      val32 = inl(SMI_EN);
+-      val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
+-      outl(val32, SMI_EN);    /* Needed to activate watchdog */
+-}
+-
+-static void supermicro_old_pre_stop(unsigned long acpibase)
+-{
+-      unsigned long val32;
+-
+-      /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+-      val32 = inl(SMI_EN);
+-      val32 |= 0x00002000;    /* Turn on SMI clearing watchdog */
+-      outl(val32, SMI_EN);    /* Needed to deactivate watchdog */
+-}
+-
+ static void supermicro_old_pre_keepalive(unsigned long acpibase)
+ {
+       /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
+@@ -248,18 +228,14 @@
+ void iTCO_vendor_pre_start(unsigned long acpibase,
+                          unsigned int heartbeat)
+ {
+-      if (vendorsupport == SUPERMICRO_OLD_BOARD)
+-              supermicro_old_pre_start(acpibase);
+-      else if (vendorsupport == SUPERMICRO_NEW_BOARD)
++      if (vendorsupport == SUPERMICRO_NEW_BOARD)
+               supermicro_new_pre_start(heartbeat);
+ }
+ EXPORT_SYMBOL(iTCO_vendor_pre_start);
+ void iTCO_vendor_pre_stop(unsigned long acpibase)
+ {
+-      if (vendorsupport == SUPERMICRO_OLD_BOARD)
+-              supermicro_old_pre_stop(acpibase);
+-      else if (vendorsupport == SUPERMICRO_NEW_BOARD)
++      if (vendorsupport == SUPERMICRO_NEW_BOARD)
+               supermicro_new_pre_stop();
+ }
+ EXPORT_SYMBOL(iTCO_vendor_pre_stop);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/iTCO_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/iTCO_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/iTCO_wdt.c      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/iTCO_wdt.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+- *    intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
++ *    intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+  *
+- *    (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
++ *    (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+  *
+  *    This program is free software; you can redistribute it and/or
+  *    modify it under the terms of the GNU General Public License
+@@ -63,7 +63,7 @@
+ /* Module and version information */
+ #define DRV_NAME      "iTCO_wdt"
+-#define DRV_VERSION   "1.05"
++#define DRV_VERSION   "1.04"
+ #define PFX           DRV_NAME ": "
+ /* Includes */
+@@ -236,16 +236,16 @@
+ /* Address definitions for the TCO */
+ /* TCO base address */
+-#define TCOBASE               iTCO_wdt_private.ACPIBASE + 0x60
++#define       TCOBASE         iTCO_wdt_private.ACPIBASE + 0x60
+ /* SMI Control and Enable Register */
+-#define SMI_EN                iTCO_wdt_private.ACPIBASE + 0x30
++#define       SMI_EN          iTCO_wdt_private.ACPIBASE + 0x30
+ #define TCO_RLD               TCOBASE + 0x00  /* TCO Timer Reload and Curr. Value */
+ #define TCOv1_TMR     TCOBASE + 0x01  /* TCOv1 Timer Initial Value    */
+-#define TCO_DAT_IN    TCOBASE + 0x02  /* TCO Data In Register         */
+-#define TCO_DAT_OUT   TCOBASE + 0x03  /* TCO Data Out Register        */
+-#define TCO1_STS      TCOBASE + 0x04  /* TCO1 Status Register         */
+-#define TCO2_STS      TCOBASE + 0x06  /* TCO2 Status Register         */
++#define       TCO_DAT_IN      TCOBASE + 0x02  /* TCO Data In Register         */
++#define       TCO_DAT_OUT     TCOBASE + 0x03  /* TCO Data Out Register        */
++#define       TCO1_STS        TCOBASE + 0x04  /* TCO1 Status Register         */
++#define       TCO2_STS        TCOBASE + 0x06  /* TCO2 Status Register         */
+ #define TCO1_CNT      TCOBASE + 0x08  /* TCO1 Control Register        */
+ #define TCO2_CNT      TCOBASE + 0x0a  /* TCO2 Control Register        */
+ #define TCOv2_TMR     TCOBASE + 0x12  /* TCOv2 Timer Initial Value    */
+@@ -338,6 +338,7 @@
+ static int iTCO_wdt_start(void)
+ {
+       unsigned int val;
++      unsigned long val32;
+       spin_lock(&iTCO_wdt_private.io_lock);
+@@ -350,6 +351,11 @@
+               return -EIO;
+       }
++      /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
++      val32 = inl(SMI_EN);
++      val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
++      outl(val32, SMI_EN);
++
+       /* Force the timer to its reload value by writing to the TCO_RLD
+          register */
+       if (iTCO_wdt_private.iTCO_version == 2)
+@@ -372,6 +378,7 @@
+ static int iTCO_wdt_stop(void)
+ {
+       unsigned int val;
++      unsigned long val32;
+       spin_lock(&iTCO_wdt_private.io_lock);
+@@ -383,6 +390,11 @@
+       outw(val, TCO1_CNT);
+       val = inw(TCO1_CNT);
++      /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
++      val32 = inl(SMI_EN);
++      val32 |= 0x00002000;
++      outl(val32, SMI_EN);
++
+       /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+       iTCO_wdt_set_NO_REBOOT_bit();
+@@ -637,7 +649,6 @@
+       int ret;
+       u32 base_address;
+       unsigned long RCBA;
+-      unsigned long val32;
+       /*
+        *      Find the ACPI/PM base I/O address which is the base
+@@ -684,10 +695,6 @@
+               ret = -EIO;
+               goto out;
+       }
+-      /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+-      val32 = inl(SMI_EN);
+-      val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
+-      outl(val32, SMI_EN);
+       /* The TCO I/O registers reside in a 32-byte range pointed to
+          by the TCOBASE value */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/Kconfig linux-2.6.29-rc3.owrt/drivers/watchdog/Kconfig
+--- linux-2.6.29.owrt/drivers/watchdog/Kconfig 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/Kconfig     2009-05-10 23:48:29.000000000 +0200
+@@ -406,7 +406,7 @@
+       ---help---
+         Hardware driver for the intel TCO timer based watchdog devices.
+         These drivers are included in the Intel 82801 I/O Controller
+-        Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
++        Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+         controller hub.
+         The TCO (Total Cost of Ownership) timer is a watchdog timer
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/ks8695_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/ks8695_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/ks8695_wdt.c    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/ks8695_wdt.c        2009-05-10 23:48:29.000000000 +0200
+@@ -21,7 +21,6 @@
+ #include <linux/watchdog.h>
+ #include <linux/io.h>
+ #include <linux/uaccess.h>
+-#include <mach/timex.h>
+ #include <mach/regs-timer.h>
+ #define WDT_DEFAULT_TIME      5       /* seconds */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/orion5x_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/orion5x_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/orion5x_wdt.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/orion5x_wdt.c       2009-05-10 23:48:29.000000000 +0200
+@@ -29,7 +29,6 @@
+ #define  WDT_EN                       0x0010
+ #define WDT_VAL                       (TIMER_VIRT_BASE + 0x0024)
+-#define ORION5X_TCLK          166666667
+ #define WDT_MAX_DURATION      (0xffffffff / ORION5X_TCLK)
+ #define WDT_IN_USE            0
+ #define WDT_OK_TO_CLOSE               1
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/watchdog/rc32434_wdt.c linux-2.6.29-rc3.owrt/drivers/watchdog/rc32434_wdt.c
+--- linux-2.6.29.owrt/drivers/watchdog/rc32434_wdt.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/watchdog/rc32434_wdt.c       2009-05-10 23:48:29.000000000 +0200
+@@ -34,89 +34,104 @@
+ #include <asm/time.h>
+ #include <asm/mach-rc32434/integ.h>
+-#define VERSION "0.4"
++#define MAX_TIMEOUT                   20
++#define RC32434_WDT_INTERVAL          (15 * HZ)
++
++#define VERSION "0.2"
+ static struct {
++      struct completion stop;
++      int running;
++      struct timer_list timer;
++      int queue;
++      int default_ticks;
+       unsigned long inuse;
+ } rc32434_wdt_device;
+ static struct integ __iomem *wdt_reg;
++static int ticks = 100 * HZ;
+ static int expect_close;
+-
+-/* Board internal clock speed in Hz,
+- * the watchdog timer ticks at. */
+-extern unsigned int idt_cpu_freq;
+-
+-/* translate wtcompare value to seconds and vice versa */
+-#define WTCOMP2SEC(x) (x / idt_cpu_freq)
+-#define SEC2WTCOMP(x) (x * idt_cpu_freq)
+-
+-/* Use a default timeout of 20s. This should be
+- * safe for CPU clock speeds up to 400MHz, as
+- * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+-#define WATCHDOG_TIMEOUT 20
+-
+-static int timeout = WATCHDOG_TIMEOUT;
++static int timeout;
+ static int nowayout = WATCHDOG_NOWAYOUT;
+ module_param(nowayout, int, 0);
+ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+       __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+-/* apply or and nand masks to data read from addr and write back */
+-#define SET_BITS(addr, or, nand) \
+-      writel((readl(&addr) | or) & ~nand, &addr)
+ static void rc32434_wdt_start(void)
+ {
+-      u32 or, nand;
+-
+-      /* zero the counter before enabling */
+-      writel(0, &wdt_reg->wtcount);
+-
+-      /* don't generate a non-maskable interrupt,
+-       * do a warm reset instead */
+-      nand = 1 << RC32434_ERR_WNE;
+-      or = 1 << RC32434_ERR_WRE;
++      u32 val;
+-      /* reset the ERRCS timeout bit in case it's set */
+-      nand |= 1 << RC32434_ERR_WTO;
++      if (!rc32434_wdt_device.inuse) {
++              writel(0, &wdt_reg->wtcount);
+-      SET_BITS(wdt_reg->errcs, or, nand);
++              val = RC32434_ERR_WRE;
++              writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+-      /* reset WTC timeout bit and enable WDT */
+-      nand = 1 << RC32434_WTC_TO;
+-      or = 1 << RC32434_WTC_EN;
+-
+-      SET_BITS(wdt_reg->wtc, or, nand);
++              val = RC32434_WTC_EN;
++              writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
++      }
++      rc32434_wdt_device.running++;
+ }
+ static void rc32434_wdt_stop(void)
+ {
+-      /* Disable WDT */
+-      SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
++      u32 val;
++
++      if (rc32434_wdt_device.running) {
++
++              val = ~RC32434_WTC_EN;
++              writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
++
++              val = ~RC32434_ERR_WRE;
++              writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
++
++              rc32434_wdt_device.running = 0;
++      }
+ }
+-static int rc32434_wdt_set(int new_timeout)
++static void rc32434_wdt_set(int new_timeout)
+ {
+-      int max_to = WTCOMP2SEC((u32)-1);
++      u32 cmp = new_timeout * HZ;
++      u32 state, val;
+-      if (new_timeout < 0 || new_timeout > max_to) {
+-              printk(KERN_ERR KBUILD_MODNAME
+-                      ": timeout value must be between 0 and %d",
+-                      max_to);
+-              return -EINVAL;
+-      }
+       timeout = new_timeout;
+-      writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
++      /*
++       * store and disable WTC
++       */
++      state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
++      val = ~RC32434_WTC_EN;
++      writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+-      return 0;
++      writel(0, &wdt_reg->wtcount);
++      writel(cmp, &wdt_reg->wtcompare);
++
++      /*
++       * restore WTC
++       */
++
++      writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+ }
+-static void rc32434_wdt_ping(void)
++static void rc32434_wdt_reset(void)
+ {
++      ticks = rc32434_wdt_device.default_ticks;
++}
++
++static void rc32434_wdt_update(unsigned long unused)
++{
++      if (rc32434_wdt_device.running)
++              ticks--;
++
+       writel(0, &wdt_reg->wtcount);
++
++      if (rc32434_wdt_device.queue && ticks)
++              mod_timer(&rc32434_wdt_device.timer,
++                      jiffies + RC32434_WDT_INTERVAL);
++      else
++              complete(&rc32434_wdt_device.stop);
+ }
+ static int rc32434_wdt_open(struct inode *inode, struct file *file)
+@@ -127,23 +142,19 @@
+       if (nowayout)
+               __module_get(THIS_MODULE);
+-      rc32434_wdt_start();
+-      rc32434_wdt_ping();
+-
+       return nonseekable_open(inode, file);
+ }
+ static int rc32434_wdt_release(struct inode *inode, struct file *file)
+ {
+-      if (expect_close == 42) {
++      if (expect_close && nowayout == 0) {
+               rc32434_wdt_stop();
+               printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
+               module_put(THIS_MODULE);
+-      } else {
++      } else
+               printk(KERN_CRIT KBUILD_MODNAME
+                       ": device closed unexpectedly. WDT will not stop !\n");
+-              rc32434_wdt_ping();
+-      }
++
+       clear_bit(0, &rc32434_wdt_device.inuse);
+       return 0;
+ }
+@@ -163,10 +174,10 @@
+                               if (get_user(c, data + i))
+                                       return -EFAULT;
+                               if (c == 'V')
+-                                      expect_close = 42;
++                                      expect_close = 1;
+                       }
+               }
+-              rc32434_wdt_ping();
++              rc32434_wdt_update(0);
+               return len;
+       }
+       return 0;
+@@ -186,11 +197,11 @@
+       };
+       switch (cmd) {
+       case WDIOC_KEEPALIVE:
+-              rc32434_wdt_ping();
++              rc32434_wdt_reset();
+               break;
+       case WDIOC_GETSTATUS:
+       case WDIOC_GETBOOTSTATUS:
+-              value = 0;
++              value = readl(&wdt_reg->wtcount);
+               if (copy_to_user(argp, &value, sizeof(int)))
+                       return -EFAULT;
+               break;
+@@ -207,7 +218,6 @@
+                       break;
+               case WDIOS_DISABLECARD:
+                       rc32434_wdt_stop();
+-                      break;
+               default:
+                       return -EINVAL;
+               }
+@@ -215,9 +225,11 @@
+       case WDIOC_SETTIMEOUT:
+               if (copy_from_user(&new_timeout, argp, sizeof(int)))
+                       return -EFAULT;
+-              if (rc32434_wdt_set(new_timeout))
++              if (new_timeout < 1)
+                       return -EINVAL;
+-              /* Fall through */
++              if (new_timeout > MAX_TIMEOUT)
++                      return -EINVAL;
++              rc32434_wdt_set(new_timeout);
+       case WDIOC_GETTIMEOUT:
+               return copy_to_user(argp, &timeout, sizeof(int));
+       default:
+@@ -242,15 +254,15 @@
+       .fops   = &rc32434_wdt_fops,
+ };
+-static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
++static char banner[] = KERN_INFO KBUILD_MODNAME
+               ": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
+-static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
++static int rc32434_wdt_probe(struct platform_device *pdev)
+ {
+       int ret;
+       struct resource *r;
+-      r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
++      r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+       if (!r) {
+               printk(KERN_ERR KBUILD_MODNAME
+                       "failed to retrieve resources\n");
+@@ -265,12 +277,24 @@
+       }
+       ret = misc_register(&rc32434_wdt_miscdev);
++
+       if (ret < 0) {
+               printk(KERN_ERR KBUILD_MODNAME
+                       "failed to register watchdog device\n");
+               goto unmap;
+       }
++      init_completion(&rc32434_wdt_device.stop);
++      rc32434_wdt_device.queue = 0;
++
++      clear_bit(0, &rc32434_wdt_device.inuse);
++
++      setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
++
++      rc32434_wdt_device.default_ticks = ticks;
++
++      rc32434_wdt_start();
++
+       printk(banner, timeout);
+       return 0;
+@@ -280,17 +304,23 @@
+       return ret;
+ }
+-static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
++static int rc32434_wdt_remove(struct platform_device *pdev)
+ {
++      if (rc32434_wdt_device.queue) {
++              rc32434_wdt_device.queue = 0;
++              wait_for_completion(&rc32434_wdt_device.stop);
++      }
+       misc_deregister(&rc32434_wdt_miscdev);
++
+       iounmap(wdt_reg);
++
+       return 0;
+ }
+ static struct platform_driver rc32434_wdt = {
+       .probe  = rc32434_wdt_probe,
+-      .remove = __devexit_p(rc32434_wdt_remove),
+-      .driver = {
++      .remove = rc32434_wdt_remove,
++      .driver = {
+               .name = "rc32434_wdt",
+       }
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/xen/balloon.c linux-2.6.29-rc3.owrt/drivers/xen/balloon.c
+--- linux-2.6.29.owrt/drivers/xen/balloon.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/xen/balloon.c        2009-05-10 23:48:29.000000000 +0200
+@@ -498,7 +498,7 @@
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+-      target_bytes = simple_strtoull(buf, &endchar, 0) * 1024;
++      target_bytes = memparse(buf, &endchar);
+       balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+@@ -508,39 +508,8 @@
+ static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR,
+                  show_target_kb, store_target_kb);
+-
+-static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr,
+-                            char *buf)
+-{
+-      return sprintf(buf, "%llu\n",
+-                     (u64)balloon_stats.target_pages << PAGE_SHIFT);
+-}
+-
+-static ssize_t store_target(struct sys_device *dev,
+-                          struct sysdev_attribute *attr,
+-                          const char *buf,
+-                          size_t count)
+-{
+-      char *endchar;
+-      unsigned long long target_bytes;
+-
+-      if (!capable(CAP_SYS_ADMIN))
+-              return -EPERM;
+-
+-      target_bytes = memparse(buf, &endchar);
+-
+-      balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+-
+-      return count;
+-}
+-
+-static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR,
+-                 show_target, store_target);
+-
+-
+ static struct sysdev_attribute *balloon_attrs[] = {
+       &attr_target_kb,
+-      &attr_target,
+ };
+ static struct attribute *balloon_info_attrs[] = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/drivers/xen/manage.c linux-2.6.29-rc3.owrt/drivers/xen/manage.c
+--- linux-2.6.29.owrt/drivers/xen/manage.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/drivers/xen/manage.c 2009-05-10 23:48:29.000000000 +0200
+@@ -45,13 +45,6 @@
+                      err);
+               return err;
+       }
+-      err = sysdev_suspend(PMSG_SUSPEND);
+-      if (err) {
+-              printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
+-                      err);
+-              device_power_up(PMSG_RESUME);
+-              return err;
+-      }
+       xen_mm_pin_all();
+       gnttab_suspend();
+@@ -68,7 +61,6 @@
+       gnttab_resume();
+       xen_mm_unpin_all();
+-      sysdev_resume();
+       device_power_up(PMSG_RESUME);
+       if (!*cancelled) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/aio.c linux-2.6.29-rc3.owrt/fs/aio.c
+--- linux-2.6.29.owrt/fs/aio.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/aio.c     2009-05-10 23:48:29.000000000 +0200
+@@ -443,7 +443,7 @@
+       req->private = NULL;
+       req->ki_iovec = NULL;
+       INIT_LIST_HEAD(&req->ki_run_list);
+-      req->ki_eventfd = NULL;
++      req->ki_eventfd = ERR_PTR(-EINVAL);
+       /* Check if the completion queue has enough free space to
+        * accept an event from this io.
+@@ -485,6 +485,8 @@
+ {
+       assert_spin_locked(&ctx->ctx_lock);
++      if (!IS_ERR(req->ki_eventfd))
++              fput(req->ki_eventfd);
+       if (req->ki_dtor)
+               req->ki_dtor(req);
+       if (req->ki_iovec != &req->ki_inline_vec)
+@@ -506,11 +508,8 @@
+               list_del(&req->ki_list);
+               spin_unlock_irq(&fput_lock);
+-              /* Complete the fput(s) */
+-              if (req->ki_filp != NULL)
+-                      __fput(req->ki_filp);
+-              if (req->ki_eventfd != NULL)
+-                      __fput(req->ki_eventfd);
++              /* Complete the fput */
++              __fput(req->ki_filp);
+               /* Link the iocb into the context's free list */
+               spin_lock_irq(&ctx->ctx_lock);
+@@ -528,14 +527,12 @@
+  */
+ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
+ {
+-      int schedule_putreq = 0;
+-
+       dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
+               req, atomic_long_read(&req->ki_filp->f_count));
+       assert_spin_locked(&ctx->ctx_lock);
+-      req->ki_users--;
++      req->ki_users --;
+       BUG_ON(req->ki_users < 0);
+       if (likely(req->ki_users))
+               return 0;
+@@ -543,23 +540,10 @@
+       req->ki_cancel = NULL;
+       req->ki_retry = NULL;
+-      /*
+-       * Try to optimize the aio and eventfd file* puts, by avoiding to
+-       * schedule work in case it is not __fput() time. In normal cases,
+-       * we would not be holding the last reference to the file*, so
+-       * this function will be executed w/out any aio kthread wakeup.
++      /* Must be done under the lock to serialise against cancellation.
++       * Call this aio_fput as it duplicates fput via the fput_work.
+        */
+-      if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
+-              schedule_putreq++;
+-      else
+-              req->ki_filp = NULL;
+-      if (req->ki_eventfd != NULL) {
+-              if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
+-                      schedule_putreq++;
+-              else
+-                      req->ki_eventfd = NULL;
+-      }
+-      if (unlikely(schedule_putreq)) {
++      if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
+               get_ioctx(ctx);
+               spin_lock(&fput_lock);
+               list_add(&req->ki_list, &fput_head);
+@@ -587,7 +571,7 @@
+ static struct kioctx *lookup_ioctx(unsigned long ctx_id)
+ {
+       struct mm_struct *mm = current->mm;
+-      struct kioctx *ctx, *ret = NULL;
++      struct kioctx *ctx = NULL;
+       struct hlist_node *n;
+       rcu_read_lock();
+@@ -595,13 +579,12 @@
+       hlist_for_each_entry_rcu(ctx, n, &mm->ioctx_list, list) {
+               if (ctx->user_id == ctx_id && !ctx->dead) {
+                       get_ioctx(ctx);
+-                      ret = ctx;
+                       break;
+               }
+       }
+       rcu_read_unlock();
+-      return ret;
++      return ctx;
+ }
+ /*
+@@ -1026,7 +1009,7 @@
+        * eventfd. The eventfd_signal() function is safe to be called
+        * from IRQ context.
+        */
+-      if (iocb->ki_eventfd != NULL)
++      if (!IS_ERR(iocb->ki_eventfd))
+               eventfd_signal(iocb->ki_eventfd, 1);
+ put_rq:
+@@ -1625,7 +1608,6 @@
+               req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+               if (IS_ERR(req->ki_eventfd)) {
+                       ret = PTR_ERR(req->ki_eventfd);
+-                      req->ki_eventfd = NULL;
+                       goto out_put_req;
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/binfmt_elf.c linux-2.6.29-rc3.owrt/fs/binfmt_elf.c
+--- linux-2.6.29.owrt/fs/binfmt_elf.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/binfmt_elf.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1225,15 +1225,7 @@
+               magic.elfmag[EI_MAG1] = ELFMAG1;
+               magic.elfmag[EI_MAG2] = ELFMAG2;
+               magic.elfmag[EI_MAG3] = ELFMAG3;
+-              /*
+-               * Switch to the user "segment" for get_user(),
+-               * then put back what elf_core_dump() had in place.
+-               */
+-              set_fs(USER_DS);
+-              if (unlikely(get_user(word, header)))
+-                      word = 0;
+-              set_fs(fs);
+-              if (word == magic.cmp)
++              if (get_user(word, header) == 0 && word == magic.cmp)
+                       return PAGE_SIZE;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/bio.c linux-2.6.29-rc3.owrt/fs/bio.c
+--- linux-2.6.29.owrt/fs/bio.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/bio.c     2009-05-10 23:48:29.000000000 +0200
+@@ -302,10 +302,9 @@
+ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
+ {
+       struct bio *bio = NULL;
+-      void *uninitialized_var(p);
+       if (bs) {
+-              p = mempool_alloc(bs->bio_pool, gfp_mask);
++              void *p = mempool_alloc(bs->bio_pool, gfp_mask);
+               if (p)
+                       bio = p + bs->front_pad;
+@@ -330,7 +329,7 @@
+                       }
+                       if (unlikely(!bvl)) {
+                               if (bs)
+-                                      mempool_free(p, bs->bio_pool);
++                                      mempool_free(bio, bs->bio_pool);
+                               else
+                                       kfree(bio);
+                               bio = NULL;
+@@ -463,12 +462,10 @@
+       if (bio_integrity(bio)) {
+               int ret;
+-              ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
++              ret = bio_integrity_clone(b, bio, fs_bio_set);
+-              if (ret < 0) {
+-                      bio_put(b);
++              if (ret < 0)
+                       return NULL;
+-              }
+       }
+       return b;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/bio-integrity.c linux-2.6.29-rc3.owrt/fs/bio-integrity.c
+--- linux-2.6.29.owrt/fs/bio-integrity.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/bio-integrity.c   2009-05-10 23:48:29.000000000 +0200
+@@ -140,6 +140,7 @@
+       iv = bip_vec_idx(bip, bip->bip_vcnt);
+       BUG_ON(iv == NULL);
++      BUG_ON(iv->bv_page != NULL);
+       iv->bv_page = page;
+       iv->bv_len = len;
+@@ -464,7 +465,7 @@
+               if (ret) {
+                       kunmap_atomic(kaddr, KM_USER0);
+-                      return ret;
++                      break;
+               }
+               sectors = bv->bv_len / bi->sector_size;
+@@ -492,13 +493,18 @@
+       struct bio_integrity_payload *bip =
+               container_of(work, struct bio_integrity_payload, bip_work);
+       struct bio *bio = bip->bip_bio;
+-      int error;
++      int error = bip->bip_error;
+-      error = bio_integrity_verify(bio);
++      if (bio_integrity_verify(bio)) {
++              clear_bit(BIO_UPTODATE, &bio->bi_flags);
++              error = -EIO;
++      }
+       /* Restore original bio completion handler */
+       bio->bi_end_io = bip->bip_end_io;
+-      bio_endio(bio, error);
++
++      if (bio->bi_end_io)
++              bio->bi_end_io(bio, error);
+ }
+ /**
+@@ -519,17 +525,7 @@
+       BUG_ON(bip->bip_bio != bio);
+-      /* In case of an I/O error there is no point in verifying the
+-       * integrity metadata.  Restore original bio end_io handler
+-       * and run it.
+-       */
+-      if (error) {
+-              bio->bi_end_io = bip->bip_end_io;
+-              bio_endio(bio, error);
+-
+-              return;
+-      }
+-
++      bip->bip_error = error;
+       INIT_WORK(&bip->bip_work, bio_integrity_verify_fn);
+       queue_work(kintegrityd_wq, &bip->bip_work);
+ }
+@@ -685,20 +681,19 @@
+  * bio_integrity_clone - Callback for cloning bios with integrity metadata
+  * @bio:      New bio
+  * @bio_src:  Original bio
+- * @gfp_mask: Memory allocation mask
+  * @bs:               bio_set to allocate bip from
+  *
+  * Description:       Called to allocate a bip when cloning a bio
+  */
+ int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+-                      gfp_t gfp_mask, struct bio_set *bs)
++                      struct bio_set *bs)
+ {
+       struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
+       struct bio_integrity_payload *bip;
+       BUG_ON(bip_src == NULL);
+-      bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
++      bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs);
+       if (bip == NULL)
+               return -EIO;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/async-thread.c linux-2.6.29-rc3.owrt/fs/btrfs/async-thread.c
+--- linux-2.6.29.owrt/fs/btrfs/async-thread.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/async-thread.c      2009-05-10 23:48:29.000000000 +0200
+@@ -16,11 +16,11 @@
+  * Boston, MA 021110-1307, USA.
+  */
++#include <linux/version.h>
+ #include <linux/kthread.h>
+ #include <linux/list.h>
+ #include <linux/spinlock.h>
+-#include <linux/freezer.h>
+-#include <linux/ftrace.h>
++# include <linux/freezer.h>
+ #include "async-thread.h"
+ #define WORK_QUEUED_BIT 0
+@@ -143,7 +143,6 @@
+       struct btrfs_work *work;
+       do {
+               spin_lock_irq(&worker->lock);
+-again_locked:
+               while (!list_empty(&worker->pending)) {
+                       cur = worker->pending.next;
+                       work = list_entry(cur, struct btrfs_work, list);
+@@ -166,50 +165,14 @@
+                       check_idle_worker(worker);
+               }
++              worker->working = 0;
+               if (freezing(current)) {
+-                      worker->working = 0;
+-                      spin_unlock_irq(&worker->lock);
+                       refrigerator();
+               } else {
++                      set_current_state(TASK_INTERRUPTIBLE);
+                       spin_unlock_irq(&worker->lock);
+-                      if (!kthread_should_stop()) {
+-                              cpu_relax();
+-                              /*
+-                               * we've dropped the lock, did someone else
+-                               * jump_in?
+-                               */
+-                              smp_mb();
+-                              if (!list_empty(&worker->pending))
+-                                      continue;
+-
+-                              /*
+-                               * this short schedule allows more work to
+-                               * come in without the queue functions
+-                               * needing to go through wake_up_process()
+-                               *
+-                               * worker->working is still 1, so nobody
+-                               * is going to try and wake us up
+-                               */
+-                              schedule_timeout(1);
+-                              smp_mb();
+-                              if (!list_empty(&worker->pending))
+-                                      continue;
+-
+-                              /* still no more work?, sleep for real */
+-                              spin_lock_irq(&worker->lock);
+-                              set_current_state(TASK_INTERRUPTIBLE);
+-                              if (!list_empty(&worker->pending))
+-                                      goto again_locked;
+-
+-                              /*
+-                               * this makes sure we get a wakeup when someone
+-                               * adds something new to the queue
+-                               */
+-                              worker->working = 0;
+-                              spin_unlock_irq(&worker->lock);
+-
++                      if (!kthread_should_stop())
+                               schedule();
+-                      }
+                       __set_current_state(TASK_RUNNING);
+               }
+       } while (!kthread_should_stop());
+@@ -387,14 +350,13 @@
+ {
+       struct btrfs_worker_thread *worker = work->worker;
+       unsigned long flags;
+-      int wake = 0;
+       if (test_and_set_bit(WORK_QUEUED_BIT, &work->flags))
+               goto out;
+       spin_lock_irqsave(&worker->lock, flags);
+-      list_add_tail(&work->list, &worker->pending);
+       atomic_inc(&worker->num_pending);
++      list_add_tail(&work->list, &worker->pending);
+       /* by definition we're busy, take ourselves off the idle
+        * list
+@@ -406,16 +368,10 @@
+                              &worker->workers->worker_list);
+               spin_unlock_irqrestore(&worker->workers->lock, flags);
+       }
+-      if (!worker->working) {
+-              wake = 1;
+-              worker->working = 1;
+-      }
+       spin_unlock_irqrestore(&worker->lock, flags);
+-      if (wake)
+-              wake_up_process(worker->task);
+-out:
++out:
+       return 0;
+ }
+@@ -442,10 +398,9 @@
+       }
+       spin_lock_irqsave(&worker->lock, flags);
+-
+-      list_add_tail(&work->list, &worker->pending);
+       atomic_inc(&worker->num_pending);
+       check_busy_worker(worker);
++      list_add_tail(&work->list, &worker->pending);
+       /*
+        * avoid calling into wake_up_process if this thread has already
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/btrfs_inode.h linux-2.6.29-rc3.owrt/fs/btrfs/btrfs_inode.h
+--- linux-2.6.29.owrt/fs/btrfs/btrfs_inode.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/btrfs_inode.h       2009-05-10 23:48:29.000000000 +0200
+@@ -66,9 +66,6 @@
+        */
+       struct list_head delalloc_inodes;
+-      /* the space_info for where this inode's data allocations are done */
+-      struct btrfs_space_info *space_info;
+-
+       /* full 64 bit generation number, struct vfs_inode doesn't have a big
+        * enough field for this.
+        */
+@@ -97,11 +94,6 @@
+        */
+       u64 delalloc_bytes;
+-      /* total number of bytes that may be used for this inode for
+-       * delalloc
+-       */
+-      u64 reserved_bytes;
+-
+       /*
+        * the size of the file stored in the metadata on disk.  data=ordered
+        * means the in-memory i_size might be larger than the size on disk
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/compression.c linux-2.6.29-rc3.owrt/fs/btrfs/compression.c
+--- linux-2.6.29.owrt/fs/btrfs/compression.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/compression.c       2009-05-10 23:48:29.000000000 +0200
+@@ -32,6 +32,7 @@
+ #include <linux/swap.h>
+ #include <linux/writeback.h>
+ #include <linux/bit_spinlock.h>
++#include <linux/version.h>
+ #include <linux/pagevec.h>
+ #include "compat.h"
+ #include "ctree.h"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ctree.c linux-2.6.29-rc3.owrt/fs/btrfs/ctree.c
+--- linux-2.6.29.owrt/fs/btrfs/ctree.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ctree.c     2009-05-10 23:48:29.000000000 +0200
+@@ -38,62 +38,20 @@
+ static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+                  struct btrfs_path *path, int level, int slot);
+-struct btrfs_path *btrfs_alloc_path(void)
++inline void btrfs_init_path(struct btrfs_path *p)
+ {
+-      struct btrfs_path *path;
+-      path = kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS);
+-      if (path)
+-              path->reada = 1;
+-      return path;
++      memset(p, 0, sizeof(*p));
+ }
+-/*
+- * set all locked nodes in the path to blocking locks.  This should
+- * be done before scheduling
+- */
+-noinline void btrfs_set_path_blocking(struct btrfs_path *p)
+-{
+-      int i;
+-      for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
+-              if (p->nodes[i] && p->locks[i])
+-                      btrfs_set_lock_blocking(p->nodes[i]);
+-      }
+-}
+-
+-/*
+- * reset all the locked nodes in the patch to spinning locks.
+- *
+- * held is used to keep lockdep happy, when lockdep is enabled
+- * we set held to a blocking lock before we go around and
+- * retake all the spinlocks in the path.  You can safely use NULL
+- * for held
+- */
+-noinline void btrfs_clear_path_blocking(struct btrfs_path *p,
+-                                      struct extent_buffer *held)
++struct btrfs_path *btrfs_alloc_path(void)
+ {
+-      int i;
+-
+-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+-      /* lockdep really cares that we take all of these spinlocks
+-       * in the right order.  If any of the locks in the path are not
+-       * currently blocking, it is going to complain.  So, make really
+-       * really sure by forcing the path to blocking before we clear
+-       * the path blocking.
+-       */
+-      if (held)
+-              btrfs_set_lock_blocking(held);
+-      btrfs_set_path_blocking(p);
+-#endif
+-
+-      for (i = BTRFS_MAX_LEVEL - 1; i >= 0; i--) {
+-              if (p->nodes[i] && p->locks[i])
+-                      btrfs_clear_lock_blocking(p->nodes[i]);
++      struct btrfs_path *path;
++      path = kmem_cache_alloc(btrfs_path_cachep, GFP_NOFS);
++      if (path) {
++              btrfs_init_path(path);
++              path->reada = 1;
+       }
+-
+-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+-      if (held)
+-              btrfs_clear_lock_blocking(held);
+-#endif
++      return path;
+ }
+ /* this also releases the path */
+@@ -277,7 +235,7 @@
+       if (*cow_ret == buf)
+               unlock_orig = 1;
+-      btrfs_assert_tree_locked(buf);
++      WARN_ON(!btrfs_tree_locked(buf));
+       if (parent)
+               parent_start = parent->start;
+@@ -303,7 +261,7 @@
+                                                 trans->transid, level, &ins);
+               BUG_ON(ret);
+               cow = btrfs_init_new_buffer(trans, root, prealloc_dest,
+-                                          buf->len, level);
++                                          buf->len);
+       } else {
+               cow = btrfs_alloc_free_block(trans, root, buf->len,
+                                            parent_start,
+@@ -314,8 +272,6 @@
+       if (IS_ERR(cow))
+               return PTR_ERR(cow);
+-      /* cow is set to blocking by btrfs_init_new_buffer */
+-
+       copy_extent_buffer(cow, buf, 0, 0, cow->len);
+       btrfs_set_header_bytenr(cow, cow->start);
+       btrfs_set_header_generation(cow, trans->transid);
+@@ -432,20 +388,17 @@
+               WARN_ON(1);
+       }
++      spin_lock(&root->fs_info->hash_lock);
+       if (btrfs_header_generation(buf) == trans->transid &&
+           btrfs_header_owner(buf) == root->root_key.objectid &&
+           !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
+               *cow_ret = buf;
++              spin_unlock(&root->fs_info->hash_lock);
+               WARN_ON(prealloc_dest);
+               return 0;
+       }
+-
++      spin_unlock(&root->fs_info->hash_lock);
+       search_start = buf->start & ~((u64)(1024 * 1024 * 1024) - 1);
+-
+-      if (parent)
+-              btrfs_set_lock_blocking(parent);
+-      btrfs_set_lock_blocking(buf);
+-
+       ret = __btrfs_cow_block(trans, root, buf, parent,
+                                parent_slot, cow_ret, search_start, 0,
+                                prealloc_dest);
+@@ -551,8 +504,6 @@
+       if (parent_nritems == 1)
+               return 0;
+-      btrfs_set_lock_blocking(parent);
+-
+       for (i = start_slot; i < end_slot; i++) {
+               int close = 1;
+@@ -613,7 +564,6 @@
+                       search_start = last_block;
+               btrfs_tree_lock(cur);
+-              btrfs_set_lock_blocking(cur);
+               err = __btrfs_cow_block(trans, root, cur, parent, i,
+                                       &cur, search_start,
+                                       min(16 * blocksize,
+@@ -912,7 +862,6 @@
+               return 0;
+       mid = path->nodes[level];
+-
+       WARN_ON(!path->locks[level]);
+       WARN_ON(btrfs_header_generation(mid) != trans->transid);
+@@ -934,9 +883,8 @@
+               /* promote the child to a root */
+               child = read_node_slot(root, mid, 0);
+-              BUG_ON(!child);
+               btrfs_tree_lock(child);
+-              btrfs_set_lock_blocking(child);
++              BUG_ON(!child);
+               ret = btrfs_cow_block(trans, root, child, mid, 0, &child, 0);
+               BUG_ON(ret);
+@@ -952,7 +900,6 @@
+               add_root_to_dirty_list(root);
+               btrfs_tree_unlock(child);
+-
+               path->locks[level] = 0;
+               path->nodes[level] = NULL;
+               clean_tree_block(trans, root, mid);
+@@ -977,7 +924,6 @@
+       left = read_node_slot(root, parent, pslot - 1);
+       if (left) {
+               btrfs_tree_lock(left);
+-              btrfs_set_lock_blocking(left);
+               wret = btrfs_cow_block(trans, root, left,
+                                      parent, pslot - 1, &left, 0);
+               if (wret) {
+@@ -988,7 +934,6 @@
+       right = read_node_slot(root, parent, pslot + 1);
+       if (right) {
+               btrfs_tree_lock(right);
+-              btrfs_set_lock_blocking(right);
+               wret = btrfs_cow_block(trans, root, right,
+                                      parent, pslot + 1, &right, 0);
+               if (wret) {
+@@ -1164,8 +1109,6 @@
+               u32 left_nr;
+               btrfs_tree_lock(left);
+-              btrfs_set_lock_blocking(left);
+-
+               left_nr = btrfs_header_nritems(left);
+               if (left_nr >= BTRFS_NODEPTRS_PER_BLOCK(root) - 1) {
+                       wret = 1;
+@@ -1212,10 +1155,7 @@
+        */
+       if (right) {
+               u32 right_nr;
+-
+               btrfs_tree_lock(right);
+-              btrfs_set_lock_blocking(right);
+-
+               right_nr = btrfs_header_nritems(right);
+               if (right_nr >= BTRFS_NODEPTRS_PER_BLOCK(root) - 1) {
+                       wret = 1;
+@@ -1270,7 +1210,8 @@
+       struct btrfs_disk_key disk_key;
+       u32 nritems;
+       u64 search;
+-      u64 target;
++      u64 lowest_read;
++      u64 highest_read;
+       u64 nread = 0;
+       int direction = path->reada;
+       struct extent_buffer *eb;
+@@ -1294,7 +1235,8 @@
+               return;
+       }
+-      target = search;
++      highest_read = search;
++      lowest_read = search;
+       nritems = btrfs_header_nritems(node);
+       nr = slot;
+@@ -1314,80 +1256,27 @@
+                               break;
+               }
+               search = btrfs_node_blockptr(node, nr);
+-              if ((search <= target && target - search <= 65536) ||
+-                  (search > target && search - target <= 65536)) {
++              if ((search >= lowest_read && search <= highest_read) ||
++                  (search < lowest_read && lowest_read - search <= 16384) ||
++                  (search > highest_read && search - highest_read <= 16384)) {
+                       readahead_tree_block(root, search, blocksize,
+                                    btrfs_node_ptr_generation(node, nr));
+                       nread += blocksize;
+               }
+               nscan++;
+-              if ((nread > 65536 || nscan > 32))
++              if (path->reada < 2 && (nread > (64 * 1024) || nscan > 32))
+                       break;
+-      }
+-}
+-
+-/*
+- * returns -EAGAIN if it had to drop the path, or zero if everything was in
+- * cache
+- */
+-static noinline int reada_for_balance(struct btrfs_root *root,
+-                                    struct btrfs_path *path, int level)
+-{
+-      int slot;
+-      int nritems;
+-      struct extent_buffer *parent;
+-      struct extent_buffer *eb;
+-      u64 gen;
+-      u64 block1 = 0;
+-      u64 block2 = 0;
+-      int ret = 0;
+-      int blocksize;
+-      parent = path->nodes[level - 1];
+-      if (!parent)
+-              return 0;
+-
+-      nritems = btrfs_header_nritems(parent);
+-      slot = path->slots[level];
+-      blocksize = btrfs_level_size(root, level);
+-
+-      if (slot > 0) {
+-              block1 = btrfs_node_blockptr(parent, slot - 1);
+-              gen = btrfs_node_ptr_generation(parent, slot - 1);
+-              eb = btrfs_find_tree_block(root, block1, blocksize);
+-              if (eb && btrfs_buffer_uptodate(eb, gen))
+-                      block1 = 0;
+-              free_extent_buffer(eb);
+-      }
+-      if (slot < nritems) {
+-              block2 = btrfs_node_blockptr(parent, slot + 1);
+-              gen = btrfs_node_ptr_generation(parent, slot + 1);
+-              eb = btrfs_find_tree_block(root, block2, blocksize);
+-              if (eb && btrfs_buffer_uptodate(eb, gen))
+-                      block2 = 0;
+-              free_extent_buffer(eb);
+-      }
+-      if (block1 || block2) {
+-              ret = -EAGAIN;
+-              btrfs_release_path(root, path);
+-              if (block1)
+-                      readahead_tree_block(root, block1, blocksize, 0);
+-              if (block2)
+-                      readahead_tree_block(root, block2, blocksize, 0);
++              if (nread > (256 * 1024) || nscan > 128)
++                      break;
+-              if (block1) {
+-                      eb = read_tree_block(root, block1, blocksize, 0);
+-                      free_extent_buffer(eb);
+-              }
+-              if (block1) {
+-                      eb = read_tree_block(root, block2, blocksize, 0);
+-                      free_extent_buffer(eb);
+-              }
++              if (search < lowest_read)
++                      lowest_read = search;
++              if (search > highest_read)
++                      highest_read = search;
+       }
+-      return ret;
+ }
+-
+ /*
+  * when we walk down the tree, it is usually safe to unlock the higher layers
+  * in the tree.  The exceptions are when our path goes through slot 0, because
+@@ -1439,32 +1328,6 @@
+ }
+ /*
+- * This releases any locks held in the path starting at level and
+- * going all the way up to the root.
+- *
+- * btrfs_search_slot will keep the lock held on higher nodes in a few
+- * corner cases, such as COW of the block at slot zero in the node.  This
+- * ignores those rules, and it should only be called when there are no
+- * more updates to be done higher up in the tree.
+- */
+-noinline void btrfs_unlock_up_safe(struct btrfs_path *path, int level)
+-{
+-      int i;
+-
+-      if (path->keep_locks || path->lowest_level)
+-              return;
+-
+-      for (i = level; i < BTRFS_MAX_LEVEL; i++) {
+-              if (!path->nodes[i])
+-                      continue;
+-              if (!path->locks[i])
+-                      continue;
+-              btrfs_tree_unlock(path->nodes[i]);
+-              path->locks[i] = 0;
+-      }
+-}
+-
+-/*
+  * look for key in the tree.  path is filled in with nodes along the way
+  * if key is found, we return zero and you can find the item in the leaf
+  * level of the path (level 0)
+@@ -1524,30 +1387,32 @@
+                       int wret;
+                       /* is a cow on this block not required */
++                      spin_lock(&root->fs_info->hash_lock);
+                       if (btrfs_header_generation(b) == trans->transid &&
+                           btrfs_header_owner(b) == root->root_key.objectid &&
+                           !btrfs_header_flag(b, BTRFS_HEADER_FLAG_WRITTEN)) {
++                              spin_unlock(&root->fs_info->hash_lock);
+                               goto cow_done;
+                       }
++                      spin_unlock(&root->fs_info->hash_lock);
+                       /* ok, we have to cow, is our old prealloc the right
+                        * size?
+                        */
+                       if (prealloc_block.objectid &&
+                           prealloc_block.offset != b->len) {
+-                              btrfs_release_path(root, p);
+                               btrfs_free_reserved_extent(root,
+                                          prealloc_block.objectid,
+                                          prealloc_block.offset);
+                               prealloc_block.objectid = 0;
+-                              goto again;
+                       }
+                       /*
+                        * for higher level blocks, try not to allocate blocks
+                        * with the block and the parent locks held.
+                        */
+-                      if (level > 0 && !prealloc_block.objectid) {
++                      if (level > 1 && !prealloc_block.objectid &&
++                          btrfs_path_lock_waiting(p, level)) {
+                               u32 size = b->len;
+                               u64 hint = b->start;
+@@ -1560,8 +1425,6 @@
+                               goto again;
+                       }
+-                      btrfs_set_path_blocking(p);
+-
+                       wret = btrfs_cow_block(trans, root, b,
+                                              p->nodes[level + 1],
+                                              p->slots[level + 1],
+@@ -1583,22 +1446,6 @@
+               if (!p->skip_locking)
+                       p->locks[level] = 1;
+-              btrfs_clear_path_blocking(p, NULL);
+-
+-              /*
+-               * we have a lock on b and as long as we aren't changing
+-               * the tree, there is no way to for the items in b to change.
+-               * It is safe to drop the lock on our parent before we
+-               * go through the expensive btree search on b.
+-               *
+-               * If cow is true, then we might be changing slot zero,
+-               * which may require changing the parent.  So, we can't
+-               * drop the lock until after we know which slot we're
+-               * operating on.
+-               */
+-              if (!cow)
+-                      btrfs_unlock_up_safe(p, level + 1);
+-
+               ret = check_block(root, p, level);
+               if (ret) {
+                       ret = -1;
+@@ -1606,7 +1453,6 @@
+               }
+               ret = bin_search(b, key, level, &slot);
+-
+               if (level != 0) {
+                       if (ret && slot > 0)
+                               slot -= 1;
+@@ -1614,16 +1460,7 @@
+                       if ((p->search_for_split || ins_len > 0) &&
+                           btrfs_header_nritems(b) >=
+                           BTRFS_NODEPTRS_PER_BLOCK(root) - 3) {
+-                              int sret;
+-
+-                              sret = reada_for_balance(root, p, level);
+-                              if (sret)
+-                                      goto again;
+-
+-                              btrfs_set_path_blocking(p);
+-                              sret = split_node(trans, root, p, level);
+-                              btrfs_clear_path_blocking(p, NULL);
+-
++                              int sret = split_node(trans, root, p, level);
+                               BUG_ON(sret > 0);
+                               if (sret) {
+                                       ret = sret;
+@@ -1631,19 +1468,9 @@
+                               }
+                               b = p->nodes[level];
+                               slot = p->slots[level];
+-                      } else if (ins_len < 0 &&
+-                                 btrfs_header_nritems(b) <
+-                                 BTRFS_NODEPTRS_PER_BLOCK(root) / 4) {
+-                              int sret;
+-
+-                              sret = reada_for_balance(root, p, level);
+-                              if (sret)
+-                                      goto again;
+-
+-                              btrfs_set_path_blocking(p);
+-                              sret = balance_level(trans, root, p, level);
+-                              btrfs_clear_path_blocking(p, NULL);
+-
++                      } else if (ins_len < 0) {
++                              int sret = balance_level(trans, root, p,
++                                                       level);
+                               if (sret) {
+                                       ret = sret;
+                                       goto done;
+@@ -1677,7 +1504,7 @@
+                                * of the btree by dropping locks before
+                                * we read.
+                                */
+-                              if (level > 0) {
++                              if (level > 1) {
+                                       btrfs_release_path(NULL, p);
+                                       if (tmp)
+                                               free_extent_buffer(tmp);
+@@ -1692,7 +1519,6 @@
+                                               free_extent_buffer(tmp);
+                                       goto again;
+                               } else {
+-                                      btrfs_set_path_blocking(p);
+                                       if (tmp)
+                                               free_extent_buffer(tmp);
+                                       if (should_reada)
+@@ -1702,29 +1528,14 @@
+                                       b = read_node_slot(root, b, slot);
+                               }
+                       }
+-                      if (!p->skip_locking) {
+-                              int lret;
+-
+-                              btrfs_clear_path_blocking(p, NULL);
+-                              lret = btrfs_try_spin_lock(b);
+-
+-                              if (!lret) {
+-                                      btrfs_set_path_blocking(p);
+-                                      btrfs_tree_lock(b);
+-                                      btrfs_clear_path_blocking(p, b);
+-                              }
+-                      }
++                      if (!p->skip_locking)
++                              btrfs_tree_lock(b);
+               } else {
+                       p->slots[level] = slot;
+                       if (ins_len > 0 &&
+                           btrfs_leaf_free_space(root, b) < ins_len) {
+-                              int sret;
+-
+-                              btrfs_set_path_blocking(p);
+-                              sret = split_leaf(trans, root, key,
++                              int sret = split_leaf(trans, root, key,
+                                                     p, ins_len, ret == 0);
+-                              btrfs_clear_path_blocking(p, NULL);
+-
+                               BUG_ON(sret > 0);
+                               if (sret) {
+                                       ret = sret;
+@@ -1738,16 +1549,12 @@
+       }
+       ret = 1;
+ done:
+-      /*
+-       * we don't really know what they plan on doing with the path
+-       * from here on, so for now just mark it as blocking
+-       */
+-      btrfs_set_path_blocking(p);
+       if (prealloc_block.objectid) {
+               btrfs_free_reserved_extent(root,
+                          prealloc_block.objectid,
+                          prealloc_block.offset);
+       }
++
+       return ret;
+ }
+@@ -1771,8 +1578,6 @@
+       ret = btrfs_cow_block(trans, root, eb, NULL, 0, &eb, 0);
+       BUG_ON(ret);
+-      btrfs_set_lock_blocking(eb);
+-
+       parent = eb;
+       while (1) {
+               level = btrfs_header_level(parent);
+@@ -1797,7 +1602,6 @@
+                       eb = read_tree_block(root, bytenr, blocksize,
+                                            generation);
+                       btrfs_tree_lock(eb);
+-                      btrfs_set_lock_blocking(eb);
+               }
+               /*
+@@ -1822,7 +1626,6 @@
+                               eb = read_tree_block(root, bytenr, blocksize,
+                                               generation);
+                               btrfs_tree_lock(eb);
+-                              btrfs_set_lock_blocking(eb);
+                       }
+                       ret = btrfs_cow_block(trans, root, eb, parent, slot,
+@@ -2365,12 +2168,10 @@
+       if (slot >= btrfs_header_nritems(upper) - 1)
+               return 1;
+-      btrfs_assert_tree_locked(path->nodes[1]);
++      WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+       right = read_node_slot(root, upper, slot + 1);
+       btrfs_tree_lock(right);
+-      btrfs_set_lock_blocking(right);
+-
+       free_space = btrfs_leaf_free_space(root, right);
+       if (free_space < data_size)
+               goto out_unlock;
+@@ -2562,12 +2363,10 @@
+       if (right_nritems == 0)
+               return 1;
+-      btrfs_assert_tree_locked(path->nodes[1]);
++      WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+       left = read_node_slot(root, path->nodes[1], slot - 1);
+       btrfs_tree_lock(left);
+-      btrfs_set_lock_blocking(left);
+-
+       free_space = btrfs_leaf_free_space(root, left);
+       if (free_space < data_size) {
+               ret = 1;
+@@ -3026,12 +2825,6 @@
+       path->keep_locks = 0;
+       BUG_ON(ret);
+-      /*
+-       * make sure any changes to the path from split_leaf leave it
+-       * in a blocking state
+-       */
+-      btrfs_set_path_blocking(path);
+-
+       leaf = path->nodes[0];
+       BUG_ON(btrfs_leaf_free_space(root, leaf) < sizeof(struct btrfs_item));
+@@ -3561,7 +3354,6 @@
+               BUG();
+       }
+ out:
+-      btrfs_unlock_up_safe(path, 1);
+       return ret;
+ }
+@@ -3649,22 +3441,15 @@
+ {
+       int ret;
+       u64 root_gen = btrfs_header_generation(path->nodes[1]);
+-      u64 parent_start = path->nodes[1]->start;
+-      u64 parent_owner = btrfs_header_owner(path->nodes[1]);
+       ret = del_ptr(trans, root, path, 1, path->slots[1]);
+       if (ret)
+               return ret;
+-      /*
+-       * btrfs_free_extent is expensive, we want to make sure we
+-       * aren't holding any locks when we call it
+-       */
+-      btrfs_unlock_up_safe(path, 0);
+-
+       ret = btrfs_free_extent(trans, root, bytenr,
+                               btrfs_level_size(root, 0),
+-                              parent_start, parent_owner,
++                              path->nodes[1]->start,
++                              btrfs_header_owner(path->nodes[1]),
+                               root_gen, 0, 1);
+       return ret;
+ }
+@@ -3936,7 +3721,6 @@
+                */
+               if (slot >= nritems) {
+                       path->slots[level] = slot;
+-                      btrfs_set_path_blocking(path);
+                       sret = btrfs_find_next_key(root, path, min_key, level,
+                                                 cache_only, min_trans);
+                       if (sret == 0) {
+@@ -3954,20 +3738,16 @@
+                       unlock_up(path, level, 1);
+                       goto out;
+               }
+-              btrfs_set_path_blocking(path);
+               cur = read_node_slot(root, cur, slot);
+               btrfs_tree_lock(cur);
+-
+               path->locks[level - 1] = 1;
+               path->nodes[level - 1] = cur;
+               unlock_up(path, level, 1);
+-              btrfs_clear_path_blocking(path, NULL);
+       }
+ out:
+       if (ret == 0)
+               memcpy(min_key, &found_key, sizeof(found_key));
+-      btrfs_set_path_blocking(path);
+       return ret;
+ }
+@@ -4063,7 +3843,6 @@
+       if (ret < 0)
+               return ret;
+-      btrfs_set_path_blocking(path);
+       nritems = btrfs_header_nritems(path->nodes[0]);
+       /*
+        * by releasing the path above we dropped all our locks.  A balance
+@@ -4094,16 +3873,14 @@
+                       free_extent_buffer(next);
+               }
+-              /* the path was set to blocking above */
+               if (level == 1 && (path->locks[1] || path->skip_locking) &&
+                   path->reada)
+                       reada_for_search(root, path, level, slot, 0);
+               next = read_node_slot(root, c, slot);
+               if (!path->skip_locking) {
+-                      btrfs_assert_tree_locked(c);
++                      WARN_ON(!btrfs_tree_locked(c));
+                       btrfs_tree_lock(next);
+-                      btrfs_set_lock_blocking(next);
+               }
+               break;
+       }
+@@ -4120,15 +3897,12 @@
+                       path->locks[level] = 1;
+               if (!level)
+                       break;
+-
+-              btrfs_set_path_blocking(path);
+               if (level == 1 && path->locks[1] && path->reada)
+                       reada_for_search(root, path, level, slot, 0);
+               next = read_node_slot(root, next, 0);
+               if (!path->skip_locking) {
+-                      btrfs_assert_tree_locked(path->nodes[level]);
++                      WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+                       btrfs_tree_lock(next);
+-                      btrfs_set_lock_blocking(next);
+               }
+       }
+ done:
+@@ -4153,7 +3927,6 @@
+       while (1) {
+               if (path->slots[0] == 0) {
+-                      btrfs_set_path_blocking(path);
+                       ret = btrfs_prev_leaf(root, path);
+                       if (ret != 0)
+                               return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ctree.h linux-2.6.29-rc3.owrt/fs/btrfs/ctree.h
+--- linux-2.6.29.owrt/fs/btrfs/ctree.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ctree.h     2009-05-10 23:48:29.000000000 +0200
+@@ -43,7 +43,11 @@
+ #define BTRFS_ACL_NOT_CACHED    ((void *)-1)
+-#define BTRFS_MAX_LEVEL 8
++#ifdef CONFIG_LOCKDEP
++# define BTRFS_MAX_LEVEL 7
++#else
++# define BTRFS_MAX_LEVEL 8
++#endif
+ /* holds pointers to all of the tree roots */
+ #define BTRFS_ROOT_TREE_OBJECTID 1ULL
+@@ -450,11 +454,17 @@
+       __le32 nsec;
+ } __attribute__ ((__packed__));
+-enum btrfs_compression_type {
++typedef enum {
+       BTRFS_COMPRESS_NONE = 0,
+       BTRFS_COMPRESS_ZLIB = 1,
+       BTRFS_COMPRESS_LAST = 2,
+-};
++} btrfs_compression_type;
++
++/* we don't understand any encryption methods right now */
++typedef enum {
++      BTRFS_ENCRYPTION_NONE = 0,
++      BTRFS_ENCRYPTION_LAST = 1,
++} btrfs_encryption_type;
+ struct btrfs_inode_item {
+       /* nfs style generation number */
+@@ -596,27 +606,13 @@
+ struct btrfs_space_info {
+       u64 flags;
+-
+-      u64 total_bytes;        /* total bytes in the space */
+-      u64 bytes_used;         /* total bytes used on disk */
+-      u64 bytes_pinned;       /* total bytes pinned, will be freed when the
+-                                 transaction finishes */
+-      u64 bytes_reserved;     /* total bytes the allocator has reserved for
+-                                 current allocations */
+-      u64 bytes_readonly;     /* total bytes that are read only */
+-
+-      /* delalloc accounting */
+-      u64 bytes_delalloc;     /* number of bytes reserved for allocation,
+-                                 this space is not necessarily reserved yet
+-                                 by the allocator */
+-      u64 bytes_may_use;      /* number of bytes that may be used for
+-                                 delalloc */
+-
+-      int full;               /* indicates that we cannot allocate any more
+-                                 chunks for this space */
+-      int force_alloc;        /* set if we need to force a chunk alloc for
+-                                 this space */
+-
++      u64 total_bytes;
++      u64 bytes_used;
++      u64 bytes_pinned;
++      u64 bytes_reserved;
++      u64 bytes_readonly;
++      int full;
++      int force_alloc;
+       struct list_head list;
+       /* for block groups in our same type */
+@@ -705,7 +701,9 @@
+       struct btrfs_transaction *running_transaction;
+       wait_queue_head_t transaction_throttle;
+       wait_queue_head_t transaction_wait;
++
+       wait_queue_head_t async_submit_wait;
++      wait_queue_head_t tree_log_wait;
+       struct btrfs_super_block super_copy;
+       struct btrfs_super_block super_for_commit;
+@@ -713,6 +711,7 @@
+       struct super_block *sb;
+       struct inode *btree_inode;
+       struct backing_dev_info bdi;
++      spinlock_t hash_lock;
+       struct mutex trans_mutex;
+       struct mutex tree_log_mutex;
+       struct mutex transaction_kthread_mutex;
+@@ -731,6 +730,10 @@
+       atomic_t async_submit_draining;
+       atomic_t nr_async_bios;
+       atomic_t async_delalloc_pages;
++      atomic_t tree_log_writers;
++      atomic_t tree_log_commit;
++      unsigned long tree_log_batch;
++      u64 tree_log_transid;
+       /*
+        * this is used by the balancing code to wait for all the pending
+@@ -784,14 +787,7 @@
+       struct list_head dirty_cowonly_roots;
+       struct btrfs_fs_devices *fs_devices;
+-
+-      /*
+-       * the space_info list is almost entirely read only.  It only changes
+-       * when we add a new raid type to the FS, and that happens
+-       * very rarely.  RCU is used to protect it.
+-       */
+       struct list_head space_info;
+-
+       spinlock_t delalloc_lock;
+       spinlock_t new_trans_lock;
+       u64 delalloc_bytes;
+@@ -837,14 +833,7 @@
+       struct kobject root_kobj;
+       struct completion kobj_unregister;
+       struct mutex objectid_mutex;
+-
+       struct mutex log_mutex;
+-      wait_queue_head_t log_writer_wait;
+-      wait_queue_head_t log_commit_wait[2];
+-      atomic_t log_writers;
+-      atomic_t log_commit[2];
+-      unsigned long log_transid;
+-      unsigned long log_batch;
+       u64 objectid;
+       u64 last_trans;
+@@ -1732,8 +1721,7 @@
+                                            u64 empty_size);
+ struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
+                                           struct btrfs_root *root,
+-                                          u64 bytenr, u32 blocksize,
+-                                          int level);
++                                          u64 bytenr, u32 blocksize);
+ int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
+                      struct btrfs_root *root,
+                      u64 num_bytes, u64 parent, u64 min_bytes,
+@@ -1803,18 +1791,6 @@
+ int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
+ int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
+ u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
+-void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+-void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
+-
+-int btrfs_check_metadata_free_space(struct btrfs_root *root);
+-int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+-                              u64 bytes);
+-void btrfs_free_reserved_data_space(struct btrfs_root *root,
+-                                  struct inode *inode, u64 bytes);
+-void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+-                               u64 bytes);
+-void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+-                            u64 bytes);
+ /* ctree.c */
+ int btrfs_previous_item(struct btrfs_root *root,
+                       struct btrfs_path *path, u64 min_objectid,
+@@ -1864,9 +1840,7 @@
+ void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p);
+ struct btrfs_path *btrfs_alloc_path(void);
+ void btrfs_free_path(struct btrfs_path *p);
+-void btrfs_set_path_blocking(struct btrfs_path *p);
+-void btrfs_unlock_up_safe(struct btrfs_path *p, int level);
+-
++void btrfs_init_path(struct btrfs_path *p);
+ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+                  struct btrfs_path *path, int slot, int nr);
+ int btrfs_del_leaf(struct btrfs_trans_handle *trans,
+@@ -2060,6 +2034,8 @@
+ unsigned long btrfs_force_ra(struct address_space *mapping,
+                             struct file_ra_state *ra, struct file *file,
+                             pgoff_t offset, pgoff_t last_index);
++int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
++                         int for_del);
+ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page);
+ int btrfs_readpage(struct file *file, struct page *page);
+ void btrfs_delete_inode(struct inode *inode);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/disk-io.c linux-2.6.29-rc3.owrt/fs/btrfs/disk-io.c
+--- linux-2.6.29.owrt/fs/btrfs/disk-io.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/disk-io.c   2009-05-10 23:48:29.000000000 +0200
+@@ -16,6 +16,7 @@
+  * Boston, MA 021110-1307, USA.
+  */
++#include <linux/version.h>
+ #include <linux/fs.h>
+ #include <linux/blkdev.h>
+ #include <linux/scatterlist.h>
+@@ -75,40 +76,6 @@
+       struct btrfs_work work;
+ };
+-/* These are used to set the lockdep class on the extent buffer locks.
+- * The class is set by the readpage_end_io_hook after the buffer has
+- * passed csum validation but before the pages are unlocked.
+- *
+- * The lockdep class is also set by btrfs_init_new_buffer on freshly
+- * allocated blocks.
+- *
+- * The class is based on the level in the tree block, which allows lockdep
+- * to know that lower nodes nest inside the locks of higher nodes.
+- *
+- * We also add a check to make sure the highest level of the tree is
+- * the same as our lockdep setup here.  If BTRFS_MAX_LEVEL changes, this
+- * code needs update as well.
+- */
+-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+-# if BTRFS_MAX_LEVEL != 8
+-#  error
+-# endif
+-static struct lock_class_key btrfs_eb_class[BTRFS_MAX_LEVEL + 1];
+-static const char *btrfs_eb_name[BTRFS_MAX_LEVEL + 1] = {
+-      /* leaf */
+-      "btrfs-extent-00",
+-      "btrfs-extent-01",
+-      "btrfs-extent-02",
+-      "btrfs-extent-03",
+-      "btrfs-extent-04",
+-      "btrfs-extent-05",
+-      "btrfs-extent-06",
+-      "btrfs-extent-07",
+-      /* highest possible level */
+-      "btrfs-extent-08",
+-};
+-#endif
+-
+ /*
+  * extents on the btree inode are pretty simple, there's one extent
+  * that covers the entire device
+@@ -381,15 +348,6 @@
+       return ret;
+ }
+-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+-void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level)
+-{
+-      lockdep_set_class_and_name(&eb->lock,
+-                         &btrfs_eb_class[level],
+-                         btrfs_eb_name[level]);
+-}
+-#endif
+-
+ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end,
+                              struct extent_state *state)
+ {
+@@ -435,8 +393,6 @@
+       }
+       found_level = btrfs_header_level(eb);
+-      btrfs_set_buffer_lockdep_class(eb, found_level);
+-
+       ret = csum_tree_block(root, eb, 1);
+       if (ret)
+               ret = -EIO;
+@@ -844,7 +800,7 @@
+       ret = btree_read_extent_buffer_pages(root, buf, 0, parent_transid);
+       if (ret == 0)
+-              set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
++              buf->flags |= EXTENT_UPTODATE;
+       else
+               WARN_ON(1);
+       return buf;
+@@ -857,11 +813,7 @@
+       struct inode *btree_inode = root->fs_info->btree_inode;
+       if (btrfs_header_generation(buf) ==
+           root->fs_info->running_transaction->transid) {
+-              btrfs_assert_tree_locked(buf);
+-
+-              /* ugh, clear_extent_buffer_dirty can be expensive */
+-              btrfs_set_lock_blocking(buf);
+-
++              WARN_ON(!btrfs_tree_locked(buf));
+               clear_extent_buffer_dirty(&BTRFS_I(btree_inode)->io_tree,
+                                         buf);
+       }
+@@ -898,14 +850,6 @@
+       spin_lock_init(&root->list_lock);
+       mutex_init(&root->objectid_mutex);
+       mutex_init(&root->log_mutex);
+-      init_waitqueue_head(&root->log_writer_wait);
+-      init_waitqueue_head(&root->log_commit_wait[0]);
+-      init_waitqueue_head(&root->log_commit_wait[1]);
+-      atomic_set(&root->log_commit[0], 0);
+-      atomic_set(&root->log_commit[1], 0);
+-      atomic_set(&root->log_writers, 0);
+-      root->log_batch = 0;
+-      root->log_transid = 0;
+       extent_io_tree_init(&root->dirty_log_pages,
+                            fs_info->btree_inode->i_mapping, GFP_NOFS);
+@@ -990,16 +934,15 @@
+       return 0;
+ }
+-static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
+-                                       struct btrfs_fs_info *fs_info)
++int btrfs_init_log_root_tree(struct btrfs_trans_handle *trans,
++                           struct btrfs_fs_info *fs_info)
+ {
+       struct btrfs_root *root;
+       struct btrfs_root *tree_root = fs_info->tree_root;
+-      struct extent_buffer *leaf;
+       root = kzalloc(sizeof(*root), GFP_NOFS);
+       if (!root)
+-              return ERR_PTR(-ENOMEM);
++              return -ENOMEM;
+       __setup_root(tree_root->nodesize, tree_root->leafsize,
+                    tree_root->sectorsize, tree_root->stripesize,
+@@ -1008,23 +951,12 @@
+       root->root_key.objectid = BTRFS_TREE_LOG_OBJECTID;
+       root->root_key.type = BTRFS_ROOT_ITEM_KEY;
+       root->root_key.offset = BTRFS_TREE_LOG_OBJECTID;
+-      /*
+-       * log trees do not get reference counted because they go away
+-       * before a real commit is actually done.  They do store pointers
+-       * to file data extents, and those reference counts still get
+-       * updated (along with back refs to the log tree).
+-       */
+       root->ref_cows = 0;
+-      leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
+-                                    0, BTRFS_TREE_LOG_OBJECTID,
+-                                    trans->transid, 0, 0, 0);
+-      if (IS_ERR(leaf)) {
+-              kfree(root);
+-              return ERR_CAST(leaf);
+-      }
++      root->node = btrfs_alloc_free_block(trans, root, root->leafsize,
++                                          0, BTRFS_TREE_LOG_OBJECTID,
++                                          trans->transid, 0, 0, 0);
+-      root->node = leaf;
+       btrfs_set_header_nritems(root->node, 0);
+       btrfs_set_header_level(root->node, 0);
+       btrfs_set_header_bytenr(root->node, root->node->start);
+@@ -1036,48 +968,7 @@
+                           BTRFS_FSID_SIZE);
+       btrfs_mark_buffer_dirty(root->node);
+       btrfs_tree_unlock(root->node);
+-      return root;
+-}
+-
+-int btrfs_init_log_root_tree(struct btrfs_trans_handle *trans,
+-                           struct btrfs_fs_info *fs_info)
+-{
+-      struct btrfs_root *log_root;
+-
+-      log_root = alloc_log_tree(trans, fs_info);
+-      if (IS_ERR(log_root))
+-              return PTR_ERR(log_root);
+-      WARN_ON(fs_info->log_root_tree);
+-      fs_info->log_root_tree = log_root;
+-      return 0;
+-}
+-
+-int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
+-                     struct btrfs_root *root)
+-{
+-      struct btrfs_root *log_root;
+-      struct btrfs_inode_item *inode_item;
+-
+-      log_root = alloc_log_tree(trans, root->fs_info);
+-      if (IS_ERR(log_root))
+-              return PTR_ERR(log_root);
+-
+-      log_root->last_trans = trans->transid;
+-      log_root->root_key.offset = root->root_key.objectid;
+-
+-      inode_item = &log_root->root_item.inode;
+-      inode_item->generation = cpu_to_le64(1);
+-      inode_item->size = cpu_to_le64(3);
+-      inode_item->nlink = cpu_to_le32(1);
+-      inode_item->nbytes = cpu_to_le64(root->leafsize);
+-      inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
+-
+-      btrfs_set_root_bytenr(&log_root->root_item, log_root->node->start);
+-      btrfs_set_root_generation(&log_root->root_item, trans->transid);
+-
+-      WARN_ON(root->log_root);
+-      root->log_root = log_root;
+-      root->log_transid = 0;
++      fs_info->log_root_tree = root;
+       return 0;
+ }
+@@ -1245,6 +1136,7 @@
+ {
+       struct btrfs_fs_info *info = (struct btrfs_fs_info *)congested_data;
+       int ret = 0;
++      struct list_head *cur;
+       struct btrfs_device *device;
+       struct backing_dev_info *bdi;
+ #if 0
+@@ -1252,7 +1144,8 @@
+           btrfs_congested_async(info, 0))
+               return 1;
+ #endif
+-      list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
++      list_for_each(cur, &info->fs_devices->devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (!device->bdev)
+                       continue;
+               bdi = blk_get_backing_dev_info(device->bdev);
+@@ -1270,11 +1163,13 @@
+  */
+ static void __unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
+ {
++      struct list_head *cur;
+       struct btrfs_device *device;
+       struct btrfs_fs_info *info;
+       info = (struct btrfs_fs_info *)bdi->unplug_io_data;
+-      list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
++      list_for_each(cur, &info->fs_devices->devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (!device->bdev)
+                       continue;
+@@ -1552,6 +1447,7 @@
+       INIT_LIST_HEAD(&fs_info->dead_roots);
+       INIT_LIST_HEAD(&fs_info->hashers);
+       INIT_LIST_HEAD(&fs_info->delalloc_inodes);
++      spin_lock_init(&fs_info->hash_lock);
+       spin_lock_init(&fs_info->delalloc_lock);
+       spin_lock_init(&fs_info->new_trans_lock);
+       spin_lock_init(&fs_info->ref_cache_lock);
+@@ -1639,6 +1535,10 @@
+       init_waitqueue_head(&fs_info->transaction_throttle);
+       init_waitqueue_head(&fs_info->transaction_wait);
+       init_waitqueue_head(&fs_info->async_submit_wait);
++      init_waitqueue_head(&fs_info->tree_log_wait);
++      atomic_set(&fs_info->tree_log_commit, 0);
++      atomic_set(&fs_info->tree_log_writers, 0);
++      fs_info->tree_log_transid = 0;
+       __setup_root(4096, 4096, 4096, 4096, tree_root,
+                    fs_info, BTRFS_ROOT_TREE_OBJECTID);
+@@ -1727,8 +1627,6 @@
+        * low idle thresh
+        */
+       fs_info->endio_workers.idle_thresh = 4;
+-      fs_info->endio_meta_workers.idle_thresh = 4;
+-
+       fs_info->endio_write_workers.idle_thresh = 64;
+       fs_info->endio_meta_write_workers.idle_thresh = 64;
+@@ -1822,6 +1720,7 @@
+       ret = find_and_setup_root(tree_root, fs_info,
+                                 BTRFS_DEV_TREE_OBJECTID, dev_root);
+       dev_root->track_dirty = 1;
++
+       if (ret)
+               goto fail_extent_root;
+@@ -1841,13 +1740,13 @@
+       fs_info->system_alloc_profile = fs_info->metadata_alloc_profile;
+       fs_info->cleaner_kthread = kthread_run(cleaner_kthread, tree_root,
+                                              "btrfs-cleaner");
+-      if (IS_ERR(fs_info->cleaner_kthread))
++      if (!fs_info->cleaner_kthread)
+               goto fail_csum_root;
+       fs_info->transaction_kthread = kthread_run(transaction_kthread,
+                                                  tree_root,
+                                                  "btrfs-transaction");
+-      if (IS_ERR(fs_info->transaction_kthread))
++      if (!fs_info->transaction_kthread)
+               goto fail_cleaner;
+       if (btrfs_super_log_root(disk_super) != 0) {
+@@ -1929,14 +1828,13 @@
+ fail_iput:
+       invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
+       iput(fs_info->btree_inode);
+-
++fail:
+       btrfs_close_devices(fs_info->fs_devices);
+       btrfs_mapping_tree_free(&fs_info->mapping_tree);
+-      bdi_destroy(&fs_info->bdi);
+-fail:
+       kfree(extent_root);
+       kfree(tree_root);
++      bdi_destroy(&fs_info->bdi);
+       kfree(fs_info);
+       kfree(chunk_root);
+       kfree(dev_root);
+@@ -2097,6 +1995,7 @@
+ int write_all_supers(struct btrfs_root *root, int max_mirrors)
+ {
++      struct list_head *cur;
+       struct list_head *head = &root->fs_info->fs_devices->devices;
+       struct btrfs_device *dev;
+       struct btrfs_super_block *sb;
+@@ -2112,7 +2011,8 @@
+       sb = &root->fs_info->super_for_commit;
+       dev_item = &sb->dev_item;
+-      list_for_each_entry(dev, head, dev_list) {
++      list_for_each(cur, head) {
++              dev = list_entry(cur, struct btrfs_device, dev_list);
+               if (!dev->bdev) {
+                       total_errors++;
+                       continue;
+@@ -2145,7 +2045,8 @@
+       }
+       total_errors = 0;
+-      list_for_each_entry(dev, head, dev_list) {
++      list_for_each(cur, head) {
++              dev = list_entry(cur, struct btrfs_device, dev_list);
+               if (!dev->bdev)
+                       continue;
+               if (!dev->in_fs_metadata || !dev->writeable)
+@@ -2359,9 +2260,7 @@
+       u64 transid = btrfs_header_generation(buf);
+       struct inode *btree_inode = root->fs_info->btree_inode;
+-      btrfs_set_lock_blocking(buf);
+-
+-      btrfs_assert_tree_locked(buf);
++      WARN_ON(!btrfs_tree_locked(buf));
+       if (transid != root->fs_info->generation) {
+               printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
+                      "found %llu running %llu\n",
+@@ -2403,13 +2302,14 @@
+       int ret;
+       ret = btree_read_extent_buffer_pages(root, buf, 0, parent_transid);
+       if (ret == 0)
+-              set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
++              buf->flags |= EXTENT_UPTODATE;
+       return ret;
+ }
+ int btree_lock_page_hook(struct page *page)
+ {
+       struct inode *inode = page->mapping->host;
++      struct btrfs_root *root = BTRFS_I(inode)->root;
+       struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+       struct extent_buffer *eb;
+       unsigned long len;
+@@ -2424,7 +2324,9 @@
+               goto out;
+       btrfs_tree_lock(eb);
++      spin_lock(&root->fs_info->hash_lock);
+       btrfs_set_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN);
++      spin_unlock(&root->fs_info->hash_lock);
+       btrfs_tree_unlock(eb);
+       free_extent_buffer(eb);
+ out:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/disk-io.h linux-2.6.29-rc3.owrt/fs/btrfs/disk-io.h
+--- linux-2.6.29.owrt/fs/btrfs/disk-io.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/disk-io.h   2009-05-10 23:48:29.000000000 +0200
+@@ -98,17 +98,5 @@
+                            struct btrfs_fs_info *fs_info);
+ int btrfs_init_log_root_tree(struct btrfs_trans_handle *trans,
+                            struct btrfs_fs_info *fs_info);
+-int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
+-                     struct btrfs_root *root);
+ int btree_lock_page_hook(struct page *page);
+-
+-
+-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+-void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level);
+-#else
+-static inline void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb,
+-                                               int level)
+-{
+-}
+-#endif
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/extent_io.c linux-2.6.29-rc3.owrt/fs/btrfs/extent_io.c
+--- linux-2.6.29.owrt/fs/btrfs/extent_io.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/extent_io.c 2009-05-10 23:48:29.000000000 +0200
+@@ -9,6 +9,7 @@
+ #include <linux/spinlock.h>
+ #include <linux/blkdev.h>
+ #include <linux/swap.h>
++#include <linux/version.h>
+ #include <linux/writeback.h>
+ #include <linux/pagevec.h>
+ #include "extent_io.h"
+@@ -30,7 +31,7 @@
+ static LIST_HEAD(states);
+ #define LEAK_DEBUG 0
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+ static DEFINE_SPINLOCK(leak_lock);
+ #endif
+@@ -119,7 +120,7 @@
+ static struct extent_state *alloc_extent_state(gfp_t mask)
+ {
+       struct extent_state *state;
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+       unsigned long flags;
+ #endif
+@@ -129,7 +130,7 @@
+       state->state = 0;
+       state->private = 0;
+       state->tree = NULL;
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+       spin_lock_irqsave(&leak_lock, flags);
+       list_add(&state->leak_list, &states);
+       spin_unlock_irqrestore(&leak_lock, flags);
+@@ -144,11 +145,11 @@
+       if (!state)
+               return;
+       if (atomic_dec_and_test(&state->refs)) {
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+               unsigned long flags;
+ #endif
+               WARN_ON(state->tree);
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+               spin_lock_irqsave(&leak_lock, flags);
+               list_del(&state->leak_list);
+               spin_unlock_irqrestore(&leak_lock, flags);
+@@ -415,6 +416,8 @@
+       node = tree_insert(&tree->state, prealloc->end, &prealloc->rb_node);
+       if (node) {
++              struct extent_state *found;
++              found = rb_entry(node, struct extent_state, rb_node);
+               free_extent_state(prealloc);
+               return -EEXIST;
+       }
+@@ -2375,6 +2378,11 @@
+       int scanned = 0;
+       int range_whole = 0;
++      if (wbc->nonblocking && bdi_write_congested(bdi)) {
++              wbc->encountered_congestion = 1;
++              return 0;
++      }
++
+       pagevec_init(&pvec, 0);
+       if (wbc->range_cyclic) {
+               index = mapping->writeback_index; /* Start from prev offset */
+@@ -2847,98 +2855,6 @@
+       return sector;
+ }
+-int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+-              __u64 start, __u64 len, get_extent_t *get_extent)
+-{
+-      int ret;
+-      u64 off = start;
+-      u64 max = start + len;
+-      u32 flags = 0;
+-      u64 disko = 0;
+-      struct extent_map *em = NULL;
+-      int end = 0;
+-      u64 em_start = 0, em_len = 0;
+-      unsigned long emflags;
+-      ret = 0;
+-
+-      if (len == 0)
+-              return -EINVAL;
+-
+-      lock_extent(&BTRFS_I(inode)->io_tree, start, start + len,
+-              GFP_NOFS);
+-      em = get_extent(inode, NULL, 0, off, max - off, 0);
+-      if (!em)
+-              goto out;
+-      if (IS_ERR(em)) {
+-              ret = PTR_ERR(em);
+-              goto out;
+-      }
+-      while (!end) {
+-              off = em->start + em->len;
+-              if (off >= max)
+-                      end = 1;
+-
+-              em_start = em->start;
+-              em_len = em->len;
+-
+-              disko = 0;
+-              flags = 0;
+-
+-              switch (em->block_start) {
+-              case EXTENT_MAP_LAST_BYTE:
+-                      end = 1;
+-                      flags |= FIEMAP_EXTENT_LAST;
+-                      break;
+-              case EXTENT_MAP_HOLE:
+-                      flags |= FIEMAP_EXTENT_UNWRITTEN;
+-                      break;
+-              case EXTENT_MAP_INLINE:
+-                      flags |= (FIEMAP_EXTENT_DATA_INLINE |
+-                                FIEMAP_EXTENT_NOT_ALIGNED);
+-                      break;
+-              case EXTENT_MAP_DELALLOC:
+-                      flags |= (FIEMAP_EXTENT_DELALLOC |
+-                                FIEMAP_EXTENT_UNKNOWN);
+-                      break;
+-              default:
+-                      disko = em->block_start;
+-                      break;
+-              }
+-              if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
+-                      flags |= FIEMAP_EXTENT_ENCODED;
+-
+-              emflags = em->flags;
+-              free_extent_map(em);
+-              em = NULL;
+-
+-              if (!end) {
+-                      em = get_extent(inode, NULL, 0, off, max - off, 0);
+-                      if (!em)
+-                              goto out;
+-                      if (IS_ERR(em)) {
+-                              ret = PTR_ERR(em);
+-                              goto out;
+-                      }
+-                      emflags = em->flags;
+-              }
+-              if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
+-                      flags |= FIEMAP_EXTENT_LAST;
+-                      end = 1;
+-              }
+-
+-              ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+-                                      em_len, flags);
+-              if (ret)
+-                      goto out_free;
+-      }
+-out_free:
+-      free_extent_map(em);
+-out:
+-      unlock_extent(&BTRFS_I(inode)->io_tree, start, start + len,
+-                      GFP_NOFS);
+-      return ret;
+-}
+-
+ static inline struct page *extent_buffer_page(struct extent_buffer *eb,
+                                             unsigned long i)
+ {
+@@ -2976,17 +2892,15 @@
+                                                  gfp_t mask)
+ {
+       struct extent_buffer *eb = NULL;
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+       unsigned long flags;
+ #endif
+       eb = kmem_cache_zalloc(extent_buffer_cache, mask);
+       eb->start = start;
+       eb->len = len;
+-      spin_lock_init(&eb->lock);
+-      init_waitqueue_head(&eb->lock_wq);
+-
+-#if LEAK_DEBUG
++      mutex_init(&eb->mutex);
++#ifdef LEAK_DEBUG
+       spin_lock_irqsave(&leak_lock, flags);
+       list_add(&eb->leak_list, &buffers);
+       spin_unlock_irqrestore(&leak_lock, flags);
+@@ -2998,7 +2912,7 @@
+ static void __free_extent_buffer(struct extent_buffer *eb)
+ {
+-#if LEAK_DEBUG
++#ifdef LEAK_DEBUG
+       unsigned long flags;
+       spin_lock_irqsave(&leak_lock, flags);
+       list_del(&eb->leak_list);
+@@ -3066,7 +2980,8 @@
+               unlock_page(p);
+       }
+       if (uptodate)
+-              set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
++              eb->flags |= EXTENT_UPTODATE;
++      eb->flags |= EXTENT_BUFFER_FILLED;
+       spin_lock(&tree->buffer_lock);
+       exists = buffer_tree_insert(tree, start, &eb->rb_node);
+@@ -3220,7 +3135,7 @@
+       unsigned long num_pages;
+       num_pages = num_extent_pages(eb->start, eb->len);
+-      clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
++      eb->flags &= ~EXTENT_UPTODATE;
+       clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
+                             GFP_NOFS);
+@@ -3291,7 +3206,7 @@
+       struct page *page;
+       int pg_uptodate = 1;
+-      if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
++      if (eb->flags & EXTENT_UPTODATE)
+               return 1;
+       ret = test_range_bit(tree, eb->start, eb->start + eb->len - 1,
+@@ -3327,7 +3242,7 @@
+       struct bio *bio = NULL;
+       unsigned long bio_flags = 0;
+-      if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
++      if (eb->flags & EXTENT_UPTODATE)
+               return 0;
+       if (test_range_bit(tree, eb->start, eb->start + eb->len - 1,
+@@ -3358,7 +3273,7 @@
+       }
+       if (all_uptodate) {
+               if (start_i == 0)
+-                      set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
++                      eb->flags |= EXTENT_UPTODATE;
+               goto unlock_exit;
+       }
+@@ -3394,7 +3309,7 @@
+       }
+       if (!ret)
+-              set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
++              eb->flags |= EXTENT_UPTODATE;
+       return ret;
+ unlock_exit:
+@@ -3491,6 +3406,7 @@
+               unmap_extent_buffer(eb, eb->map_token, km);
+               eb->map_token = NULL;
+               save = 1;
++              WARN_ON(!mutex_is_locked(&eb->mutex));
+       }
+       err = map_private_extent_buffer(eb, start, min_len, token, map,
+                                      map_start, map_len, km);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/extent_io.h linux-2.6.29-rc3.owrt/fs/btrfs/extent_io.h
+--- linux-2.6.29.owrt/fs/btrfs/extent_io.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/extent_io.h 2009-05-10 23:48:29.000000000 +0200
+@@ -22,10 +22,6 @@
+ /* flags for bio submission */
+ #define EXTENT_BIO_COMPRESSED 1
+-/* these are bit numbers for test/set bit */
+-#define EXTENT_BUFFER_UPTODATE 0
+-#define EXTENT_BUFFER_BLOCKING 1
+-
+ /*
+  * page->private values.  Every page that is controlled by the extent
+  * map has page->private set to one.
+@@ -99,19 +95,11 @@
+       unsigned long map_start;
+       unsigned long map_len;
+       struct page *first_page;
+-      unsigned long bflags;
+       atomic_t refs;
++      int flags;
+       struct list_head leak_list;
+       struct rb_node rb_node;
+-
+-      /* the spinlock is used to protect most operations */
+-      spinlock_t lock;
+-
+-      /*
+-       * when we keep the lock held while blocking, waiters go onto
+-       * the wq
+-       */
+-      wait_queue_head_t lock_wq;
++      struct mutex mutex;
+ };
+ struct extent_map_tree;
+@@ -205,8 +193,6 @@
+                       unsigned from, unsigned to);
+ sector_t extent_bmap(struct address_space *mapping, sector_t iblock,
+               get_extent_t *get_extent);
+-int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+-              __u64 start, __u64 len, get_extent_t *get_extent);
+ int set_range_dirty(struct extent_io_tree *tree, u64 start, u64 end);
+ int set_state_private(struct extent_io_tree *tree, u64 start, u64 private);
+ int get_state_private(struct extent_io_tree *tree, u64 start, u64 *private);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/extent_map.c linux-2.6.29-rc3.owrt/fs/btrfs/extent_map.c
+--- linux-2.6.29.owrt/fs/btrfs/extent_map.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/extent_map.c        2009-05-10 23:48:29.000000000 +0200
+@@ -3,6 +3,7 @@
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/spinlock.h>
++#include <linux/version.h>
+ #include <linux/hardirq.h>
+ #include "extent_map.h"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/extent-tree.c linux-2.6.29-rc3.owrt/fs/btrfs/extent-tree.c
+--- linux-2.6.29.owrt/fs/btrfs/extent-tree.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/extent-tree.c       2009-05-10 23:48:29.000000000 +0200
+@@ -19,8 +19,7 @@
+ #include <linux/pagemap.h>
+ #include <linux/writeback.h>
+ #include <linux/blkdev.h>
+-#include <linux/sort.h>
+-#include <linux/rcupdate.h>
++#include <linux/version.h>
+ #include "compat.h"
+ #include "hash.h"
+ #include "crc32c.h"
+@@ -31,6 +30,7 @@
+ #include "volumes.h"
+ #include "locking.h"
+ #include "ref-cache.h"
++#include "compat.h"
+ #define PENDING_EXTENT_INSERT 0
+ #define PENDING_EXTENT_DELETE 1
+@@ -61,10 +61,6 @@
+                             u64 bytenr, u64 num_bytes, int alloc,
+                             int mark_free);
+-static int do_chunk_alloc(struct btrfs_trans_handle *trans,
+-                        struct btrfs_root *extent_root, u64 alloc_bytes,
+-                        u64 flags, int force);
+-
+ static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
+ {
+       return (cache->flags & bits) == bits;
+@@ -330,34 +326,16 @@
+                                                 u64 flags)
+ {
+       struct list_head *head = &info->space_info;
++      struct list_head *cur;
+       struct btrfs_space_info *found;
+-
+-      rcu_read_lock();
+-      list_for_each_entry_rcu(found, head, list) {
+-              if (found->flags == flags) {
+-                      rcu_read_unlock();
++      list_for_each(cur, head) {
++              found = list_entry(cur, struct btrfs_space_info, list);
++              if (found->flags == flags)
+                       return found;
+-              }
+       }
+-      rcu_read_unlock();
+       return NULL;
+ }
+-/*
+- * after adding space to the filesystem, we need to clear the full flags
+- * on all the space infos.
+- */
+-void btrfs_clear_space_info_full(struct btrfs_fs_info *info)
+-{
+-      struct list_head *head = &info->space_info;
+-      struct btrfs_space_info *found;
+-
+-      rcu_read_lock();
+-      list_for_each_entry_rcu(found, head, list)
+-              found->full = 0;
+-      rcu_read_unlock();
+-}
+-
+ static u64 div_factor(u64 num, int factor)
+ {
+       if (factor == 10)
+@@ -1348,25 +1326,8 @@
+ int btrfs_extent_post_op(struct btrfs_trans_handle *trans,
+                        struct btrfs_root *root)
+ {
+-      u64 start;
+-      u64 end;
+-      int ret;
+-
+-      while(1) {
+-              finish_current_insert(trans, root->fs_info->extent_root, 1);
+-              del_pending_extents(trans, root->fs_info->extent_root, 1);
+-
+-              /* is there more work to do? */
+-              ret = find_first_extent_bit(&root->fs_info->pending_del,
+-                                          0, &start, &end, EXTENT_WRITEBACK);
+-              if (!ret)
+-                      continue;
+-              ret = find_first_extent_bit(&root->fs_info->extent_ins,
+-                                          0, &start, &end, EXTENT_WRITEBACK);
+-              if (!ret)
+-                      continue;
+-              break;
+-      }
++      finish_current_insert(trans, root->fs_info->extent_root, 1);
++      del_pending_extents(trans, root->fs_info->extent_root, 1);
+       return 0;
+ }
+@@ -1564,55 +1525,15 @@
+       return ret;
+ }
+-/* when a block goes through cow, we update the reference counts of
+- * everything that block points to.  The internal pointers of the block
+- * can be in just about any order, and it is likely to have clusters of
+- * things that are close together and clusters of things that are not.
+- *
+- * To help reduce the seeks that come with updating all of these reference
+- * counts, sort them by byte number before actual updates are done.
+- *
+- * struct refsort is used to match byte number to slot in the btree block.
+- * we sort based on the byte number and then use the slot to actually
+- * find the item.
+- *
+- * struct refsort is smaller than strcut btrfs_item and smaller than
+- * struct btrfs_key_ptr.  Since we're currently limited to the page size
+- * for a btree block, there's no way for a kmalloc of refsorts for a
+- * single node to be bigger than a page.
+- */
+-struct refsort {
+-      u64 bytenr;
+-      u32 slot;
+-};
+-
+-/*
+- * for passing into sort()
+- */
+-static int refsort_cmp(const void *a_void, const void *b_void)
+-{
+-      const struct refsort *a = a_void;
+-      const struct refsort *b = b_void;
+-
+-      if (a->bytenr < b->bytenr)
+-              return -1;
+-      if (a->bytenr > b->bytenr)
+-              return 1;
+-      return 0;
+-}
+-
+-
+-noinline int btrfs_inc_ref(struct btrfs_trans_handle *trans,
+-                         struct btrfs_root *root,
+-                         struct extent_buffer *orig_buf,
+-                         struct extent_buffer *buf, u32 *nr_extents)
++int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
++                struct extent_buffer *orig_buf, struct extent_buffer *buf,
++                u32 *nr_extents)
+ {
+       u64 bytenr;
+       u64 ref_root;
+       u64 orig_root;
+       u64 ref_generation;
+       u64 orig_generation;
+-      struct refsort *sorted;
+       u32 nritems;
+       u32 nr_file_extents = 0;
+       struct btrfs_key key;
+@@ -1621,8 +1542,6 @@
+       int level;
+       int ret = 0;
+       int faili = 0;
+-      int refi = 0;
+-      int slot;
+       int (*process_func)(struct btrfs_trans_handle *, struct btrfs_root *,
+                           u64, u64, u64, u64, u64, u64, u64, u64);
+@@ -1634,9 +1553,6 @@
+       nritems = btrfs_header_nritems(buf);
+       level = btrfs_header_level(buf);
+-      sorted = kmalloc(sizeof(struct refsort) * nritems, GFP_NOFS);
+-      BUG_ON(!sorted);
+-
+       if (root->ref_cows) {
+               process_func = __btrfs_inc_extent_ref;
+       } else {
+@@ -1649,11 +1565,6 @@
+               process_func = __btrfs_update_extent_ref;
+       }
+-      /*
+-       * we make two passes through the items.  In the first pass we
+-       * only record the byte number and slot.  Then we sort based on
+-       * byte number and do the actual work based on the sorted results
+-       */
+       for (i = 0; i < nritems; i++) {
+               cond_resched();
+               if (level == 0) {
+@@ -1670,32 +1581,6 @@
+                               continue;
+                       nr_file_extents++;
+-                      sorted[refi].bytenr = bytenr;
+-                      sorted[refi].slot = i;
+-                      refi++;
+-              } else {
+-                      bytenr = btrfs_node_blockptr(buf, i);
+-                      sorted[refi].bytenr = bytenr;
+-                      sorted[refi].slot = i;
+-                      refi++;
+-              }
+-      }
+-      /*
+-       * if refi == 0, we didn't actually put anything into the sorted
+-       * array and we're done
+-       */
+-      if (refi == 0)
+-              goto out;
+-
+-      sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
+-
+-      for (i = 0; i < refi; i++) {
+-              cond_resched();
+-              slot = sorted[i].slot;
+-              bytenr = sorted[i].bytenr;
+-
+-              if (level == 0) {
+-                      btrfs_item_key_to_cpu(buf, &key, slot);
+                       ret = process_func(trans, root, bytenr,
+                                          orig_buf->start, buf->start,
+@@ -1704,25 +1589,25 @@
+                                          key.objectid);
+                       if (ret) {
+-                              faili = slot;
++                              faili = i;
+                               WARN_ON(1);
+                               goto fail;
+                       }
+               } else {
++                      bytenr = btrfs_node_blockptr(buf, i);
+                       ret = process_func(trans, root, bytenr,
+                                          orig_buf->start, buf->start,
+                                          orig_root, ref_root,
+                                          orig_generation, ref_generation,
+                                          level - 1);
+                       if (ret) {
+-                              faili = slot;
++                              faili = i;
+                               WARN_ON(1);
+                               goto fail;
+                       }
+               }
+       }
+ out:
+-      kfree(sorted);
+       if (nr_extents) {
+               if (level == 0)
+                       *nr_extents = nr_file_extents;
+@@ -1731,7 +1616,6 @@
+       }
+       return 0;
+ fail:
+-      kfree(sorted);
+       WARN_ON(1);
+       return ret;
+ }
+@@ -1924,6 +1808,7 @@
+       if (!found)
+               return -ENOMEM;
++      list_add(&found->list, &info->space_info);
+       INIT_LIST_HEAD(&found->block_groups);
+       init_rwsem(&found->groups_sem);
+       spin_lock_init(&found->lock);
+@@ -1933,11 +1818,9 @@
+       found->bytes_pinned = 0;
+       found->bytes_reserved = 0;
+       found->bytes_readonly = 0;
+-      found->bytes_delalloc = 0;
+       found->full = 0;
+       found->force_alloc = 0;
+       *space_info = found;
+-      list_add_rcu(&found->list, &info->space_info);
+       return 0;
+ }
+@@ -1998,233 +1881,6 @@
+       return flags;
+ }
+-static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data)
+-{
+-      struct btrfs_fs_info *info = root->fs_info;
+-      u64 alloc_profile;
+-
+-      if (data) {
+-              alloc_profile = info->avail_data_alloc_bits &
+-                      info->data_alloc_profile;
+-              data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
+-      } else if (root == root->fs_info->chunk_root) {
+-              alloc_profile = info->avail_system_alloc_bits &
+-                      info->system_alloc_profile;
+-              data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
+-      } else {
+-              alloc_profile = info->avail_metadata_alloc_bits &
+-                      info->metadata_alloc_profile;
+-              data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
+-      }
+-
+-      return btrfs_reduce_alloc_profile(root, data);
+-}
+-
+-void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
+-{
+-      u64 alloc_target;
+-
+-      alloc_target = btrfs_get_alloc_profile(root, 1);
+-      BTRFS_I(inode)->space_info = __find_space_info(root->fs_info,
+-                                                     alloc_target);
+-}
+-
+-/*
+- * for now this just makes sure we have at least 5% of our metadata space free
+- * for use.
+- */
+-int btrfs_check_metadata_free_space(struct btrfs_root *root)
+-{
+-      struct btrfs_fs_info *info = root->fs_info;
+-      struct btrfs_space_info *meta_sinfo;
+-      u64 alloc_target, thresh;
+-      int committed = 0, ret;
+-
+-      /* get the space info for where the metadata will live */
+-      alloc_target = btrfs_get_alloc_profile(root, 0);
+-      meta_sinfo = __find_space_info(info, alloc_target);
+-
+-again:
+-      spin_lock(&meta_sinfo->lock);
+-      if (!meta_sinfo->full)
+-              thresh = meta_sinfo->total_bytes * 80;
+-      else
+-              thresh = meta_sinfo->total_bytes * 95;
+-
+-      do_div(thresh, 100);
+-
+-      if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+-          meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
+-              struct btrfs_trans_handle *trans;
+-              if (!meta_sinfo->full) {
+-                      meta_sinfo->force_alloc = 1;
+-                      spin_unlock(&meta_sinfo->lock);
+-
+-                      trans = btrfs_start_transaction(root, 1);
+-                      if (!trans)
+-                              return -ENOMEM;
+-
+-                      ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+-                                           2 * 1024 * 1024, alloc_target, 0);
+-                      btrfs_end_transaction(trans, root);
+-                      goto again;
+-              }
+-              spin_unlock(&meta_sinfo->lock);
+-
+-              if (!committed) {
+-                      committed = 1;
+-                      trans = btrfs_join_transaction(root, 1);
+-                      if (!trans)
+-                              return -ENOMEM;
+-                      ret = btrfs_commit_transaction(trans, root);
+-                      if (ret)
+-                              return ret;
+-                      goto again;
+-              }
+-              return -ENOSPC;
+-      }
+-      spin_unlock(&meta_sinfo->lock);
+-
+-      return 0;
+-}
+-
+-/*
+- * This will check the space that the inode allocates from to make sure we have
+- * enough space for bytes.
+- */
+-int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+-                              u64 bytes)
+-{
+-      struct btrfs_space_info *data_sinfo;
+-      int ret = 0, committed = 0;
+-
+-      /* make sure bytes are sectorsize aligned */
+-      bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+-
+-      data_sinfo = BTRFS_I(inode)->space_info;
+-again:
+-      /* make sure we have enough space to handle the data first */
+-      spin_lock(&data_sinfo->lock);
+-      if (data_sinfo->total_bytes - data_sinfo->bytes_used -
+-          data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
+-          data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
+-          data_sinfo->bytes_may_use < bytes) {
+-              struct btrfs_trans_handle *trans;
+-
+-              /*
+-               * if we don't have enough free bytes in this space then we need
+-               * to alloc a new chunk.
+-               */
+-              if (!data_sinfo->full) {
+-                      u64 alloc_target;
+-
+-                      data_sinfo->force_alloc = 1;
+-                      spin_unlock(&data_sinfo->lock);
+-
+-                      alloc_target = btrfs_get_alloc_profile(root, 1);
+-                      trans = btrfs_start_transaction(root, 1);
+-                      if (!trans)
+-                              return -ENOMEM;
+-
+-                      ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+-                                           bytes + 2 * 1024 * 1024,
+-                                           alloc_target, 0);
+-                      btrfs_end_transaction(trans, root);
+-                      if (ret)
+-                              return ret;
+-                      goto again;
+-              }
+-              spin_unlock(&data_sinfo->lock);
+-
+-              /* commit the current transaction and try again */
+-              if (!committed) {
+-                      committed = 1;
+-                      trans = btrfs_join_transaction(root, 1);
+-                      if (!trans)
+-                              return -ENOMEM;
+-                      ret = btrfs_commit_transaction(trans, root);
+-                      if (ret)
+-                              return ret;
+-                      goto again;
+-              }
+-
+-              printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
+-                     ", %llu bytes_used, %llu bytes_reserved, "
+-                     "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+-                     "%llu total\n", bytes, data_sinfo->bytes_delalloc,
+-                     data_sinfo->bytes_used, data_sinfo->bytes_reserved,
+-                     data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
+-                     data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+-              return -ENOSPC;
+-      }
+-      data_sinfo->bytes_may_use += bytes;
+-      BTRFS_I(inode)->reserved_bytes += bytes;
+-      spin_unlock(&data_sinfo->lock);
+-
+-      return btrfs_check_metadata_free_space(root);
+-}
+-
+-/*
+- * if there was an error for whatever reason after calling
+- * btrfs_check_data_free_space, call this so we can cleanup the counters.
+- */
+-void btrfs_free_reserved_data_space(struct btrfs_root *root,
+-                                  struct inode *inode, u64 bytes)
+-{
+-      struct btrfs_space_info *data_sinfo;
+-
+-      /* make sure bytes are sectorsize aligned */
+-      bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+-
+-      data_sinfo = BTRFS_I(inode)->space_info;
+-      spin_lock(&data_sinfo->lock);
+-      data_sinfo->bytes_may_use -= bytes;
+-      BTRFS_I(inode)->reserved_bytes -= bytes;
+-      spin_unlock(&data_sinfo->lock);
+-}
+-
+-/* called when we are adding a delalloc extent to the inode's io_tree */
+-void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+-                                u64 bytes)
+-{
+-      struct btrfs_space_info *data_sinfo;
+-
+-      /* get the space info for where this inode will be storing its data */
+-      data_sinfo = BTRFS_I(inode)->space_info;
+-
+-      /* make sure we have enough space to handle the data first */
+-      spin_lock(&data_sinfo->lock);
+-      data_sinfo->bytes_delalloc += bytes;
+-
+-      /*
+-       * we are adding a delalloc extent without calling
+-       * btrfs_check_data_free_space first.  This happens on a weird
+-       * writepage condition, but shouldn't hurt our accounting
+-       */
+-      if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) {
+-              data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes;
+-              BTRFS_I(inode)->reserved_bytes = 0;
+-      } else {
+-              data_sinfo->bytes_may_use -= bytes;
+-              BTRFS_I(inode)->reserved_bytes -= bytes;
+-      }
+-
+-      spin_unlock(&data_sinfo->lock);
+-}
+-
+-/* called when we are clearing an delalloc extent from the inode's io_tree */
+-void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+-                            u64 bytes)
+-{
+-      struct btrfs_space_info *info;
+-
+-      info = BTRFS_I(inode)->space_info;
+-
+-      spin_lock(&info->lock);
+-      info->bytes_delalloc -= bytes;
+-      spin_unlock(&info->lock);
+-}
+-
+ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
+                         struct btrfs_root *extent_root, u64 alloc_bytes,
+                         u64 flags, int force)
+@@ -2481,12 +2137,13 @@
+       u64 end;
+       u64 priv;
+       u64 search = 0;
++      u64 skipped = 0;
+       struct btrfs_fs_info *info = extent_root->fs_info;
+       struct btrfs_path *path;
+       struct pending_extent_op *extent_op, *tmp;
+       struct list_head insert_list, update_list;
+       int ret;
+-      int num_inserts = 0, max_inserts, restart = 0;
++      int num_inserts = 0, max_inserts;
+       path = btrfs_alloc_path();
+       INIT_LIST_HEAD(&insert_list);
+@@ -2502,19 +2159,18 @@
+               ret = find_first_extent_bit(&info->extent_ins, search, &start,
+                                           &end, EXTENT_WRITEBACK);
+               if (ret) {
+-                      if (restart && !num_inserts &&
+-                          list_empty(&update_list)) {
+-                              restart = 0;
++                      if (skipped && all && !num_inserts) {
++                              skipped = 0;
+                               search = 0;
+                               continue;
+                       }
++                      mutex_unlock(&info->extent_ins_mutex);
+                       break;
+               }
+               ret = try_lock_extent(&info->extent_ins, start, end, GFP_NOFS);
+               if (!ret) {
+-                      if (all)
+-                              restart = 1;
++                      skipped = 1;
+                       search = end + 1;
+                       if (need_resched()) {
+                               mutex_unlock(&info->extent_ins_mutex);
+@@ -2533,7 +2189,7 @@
+                       list_add_tail(&extent_op->list, &insert_list);
+                       search = end + 1;
+                       if (num_inserts == max_inserts) {
+-                              restart = 1;
++                              mutex_unlock(&info->extent_ins_mutex);
+                               break;
+                       }
+               } else if (extent_op->type == PENDING_BACKREF_UPDATE) {
+@@ -2549,6 +2205,7 @@
+        * somebody marked this thing for deletion then just unlock it and be
+        * done, the free_extents will handle it
+        */
++      mutex_lock(&info->extent_ins_mutex);
+       list_for_each_entry_safe(extent_op, tmp, &update_list, list) {
+               clear_extent_bits(&info->extent_ins, extent_op->bytenr,
+                                 extent_op->bytenr + extent_op->num_bytes - 1,
+@@ -2570,10 +2227,6 @@
+       if (!list_empty(&update_list)) {
+               ret = update_backrefs(trans, extent_root, path, &update_list);
+               BUG_ON(ret);
+-
+-              /* we may have COW'ed new blocks, so lets start over */
+-              if (all)
+-                      restart = 1;
+       }
+       /*
+@@ -2581,9 +2234,9 @@
+        * need to make sure everything is cleaned then reset everything and
+        * go back to the beginning
+        */
+-      if (!num_inserts && restart) {
++      if (!num_inserts && all && skipped) {
+               search = 0;
+-              restart = 0;
++              skipped = 0;
+               INIT_LIST_HEAD(&update_list);
+               INIT_LIST_HEAD(&insert_list);
+               goto again;
+@@ -2640,19 +2293,27 @@
+       BUG_ON(ret);
+       /*
+-       * if restart is set for whatever reason we need to go back and start
+-       * searching through the pending list again.
+-       *
+-       * We just inserted some extents, which could have resulted in new
+-       * blocks being allocated, which would result in new blocks needing
+-       * updates, so if all is set we _must_ restart to get the updated
+-       * blocks.
++       * if we broke out of the loop in order to insert stuff because we hit
++       * the maximum number of inserts at a time we can handle, then loop
++       * back and pick up where we left off
+        */
+-      if (restart || all) {
++      if (num_inserts == max_inserts) {
++              INIT_LIST_HEAD(&insert_list);
++              INIT_LIST_HEAD(&update_list);
++              num_inserts = 0;
++              goto again;
++      }
++
++      /*
++       * again, if we need to make absolutely sure there are no more pending
++       * extent operations left and we know that we skipped some, go back to
++       * the beginning and do it all again
++       */
++      if (all && skipped) {
+               INIT_LIST_HEAD(&insert_list);
+               INIT_LIST_HEAD(&update_list);
+               search = 0;
+-              restart = 0;
++              skipped = 0;
+               num_inserts = 0;
+               goto again;
+       }
+@@ -2886,7 +2547,6 @@
+               if (ret) {
+                       if (all && skipped && !nr) {
+                               search = 0;
+-                              skipped = 0;
+                               continue;
+                       }
+                       mutex_unlock(&info->extent_ins_mutex);
+@@ -2973,8 +2633,6 @@
+               goto again;
+       }
+-      if (!err)
+-              finish_current_insert(trans, extent_root, 0);
+       return err;
+ }
+@@ -3042,9 +2700,13 @@
+       /* if metadata always pin */
+       if (owner_objectid < BTRFS_FIRST_FREE_OBJECTID) {
+               if (root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID) {
+-                      mutex_lock(&root->fs_info->pinned_mutex);
+-                      btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
+-                      mutex_unlock(&root->fs_info->pinned_mutex);
++                      struct btrfs_block_group_cache *cache;
++
++                      /* btrfs_free_reserved_extent */
++                      cache = btrfs_lookup_block_group(root->fs_info, bytenr);
++                      BUG_ON(!cache);
++                      btrfs_add_free_space(cache, bytenr, num_bytes);
++                      put_block_group(cache);
+                       update_reserved_extents(root, bytenr, num_bytes, 0);
+                       return 0;
+               }
+@@ -3125,8 +2787,7 @@
+       if (data & BTRFS_BLOCK_GROUP_METADATA) {
+               last_ptr = &root->fs_info->last_alloc;
+-              if (!btrfs_test_opt(root, SSD))
+-                      empty_cluster = 64 * 1024;
++              empty_cluster = 64 * 1024;
+       }
+       if ((data & BTRFS_BLOCK_GROUP_DATA) && btrfs_test_opt(root, SSD))
+@@ -3353,18 +3014,16 @@
+ static void dump_space_info(struct btrfs_space_info *info, u64 bytes)
+ {
+       struct btrfs_block_group_cache *cache;
++      struct list_head *l;
+       printk(KERN_INFO "space_info has %llu free, is %sfull\n",
+              (unsigned long long)(info->total_bytes - info->bytes_used -
+                                   info->bytes_pinned - info->bytes_reserved),
+              (info->full) ? "" : "not ");
+-      printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
+-             " may_use=%llu, used=%llu\n", info->total_bytes,
+-             info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
+-             info->bytes_used);
+       down_read(&info->groups_sem);
+-      list_for_each_entry(cache, &info->block_groups, list) {
++      list_for_each(l, &info->block_groups) {
++              cache = list_entry(l, struct btrfs_block_group_cache, list);
+               spin_lock(&cache->lock);
+               printk(KERN_INFO "block group %llu has %llu bytes, %llu used "
+                      "%llu pinned %llu reserved\n",
+@@ -3388,10 +3047,24 @@
+ {
+       int ret;
+       u64 search_start = 0;
++      u64 alloc_profile;
+       struct btrfs_fs_info *info = root->fs_info;
+-      data = btrfs_get_alloc_profile(root, data);
++      if (data) {
++              alloc_profile = info->avail_data_alloc_bits &
++                      info->data_alloc_profile;
++              data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
++      } else if (root == root->fs_info->chunk_root) {
++              alloc_profile = info->avail_system_alloc_bits &
++                      info->system_alloc_profile;
++              data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
++      } else {
++              alloc_profile = info->avail_metadata_alloc_bits &
++                      info->metadata_alloc_profile;
++              data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
++      }
+ again:
++      data = btrfs_reduce_alloc_profile(root, data);
+       /*
+        * the only place that sets empty_size is btrfs_realloc_node, which
+        * is not called recursively on allocations
+@@ -3659,8 +3332,7 @@
+ struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
+                                           struct btrfs_root *root,
+-                                          u64 bytenr, u32 blocksize,
+-                                          int level)
++                                          u64 bytenr, u32 blocksize)
+ {
+       struct extent_buffer *buf;
+@@ -3668,13 +3340,9 @@
+       if (!buf)
+               return ERR_PTR(-ENOMEM);
+       btrfs_set_header_generation(buf, trans->transid);
+-      btrfs_set_buffer_lockdep_class(buf, level);
+       btrfs_tree_lock(buf);
+       clean_tree_block(trans, root, buf);
+-
+-      btrfs_set_lock_blocking(buf);
+       btrfs_set_buffer_uptodate(buf);
+-
+       if (root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID) {
+               set_extent_dirty(&root->dirty_log_pages, buf->start,
+                        buf->start + buf->len - 1, GFP_NOFS);
+@@ -3683,7 +3351,6 @@
+                        buf->start + buf->len - 1, GFP_NOFS);
+       }
+       trans->blocks_used++;
+-      /* this returns a buffer locked for blocking */
+       return buf;
+ }
+@@ -3712,8 +3379,7 @@
+               return ERR_PTR(ret);
+       }
+-      buf = btrfs_init_new_buffer(trans, root, ins.objectid,
+-                                  blocksize, level);
++      buf = btrfs_init_new_buffer(trans, root, ins.objectid, blocksize);
+       return buf;
+ }
+@@ -3722,73 +3388,36 @@
+ {
+       u64 leaf_owner;
+       u64 leaf_generation;
+-      struct refsort *sorted;
+       struct btrfs_key key;
+       struct btrfs_file_extent_item *fi;
+       int i;
+       int nritems;
+       int ret;
+-      int refi = 0;
+-      int slot;
+       BUG_ON(!btrfs_is_leaf(leaf));
+       nritems = btrfs_header_nritems(leaf);
+       leaf_owner = btrfs_header_owner(leaf);
+       leaf_generation = btrfs_header_generation(leaf);
+-      sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
+-      /* we do this loop twice.  The first time we build a list
+-       * of the extents we have a reference on, then we sort the list
+-       * by bytenr.  The second time around we actually do the
+-       * extent freeing.
+-       */
+       for (i = 0; i < nritems; i++) {
+               u64 disk_bytenr;
+               cond_resched();
+               btrfs_item_key_to_cpu(leaf, &key, i);
+-
+-              /* only extents have references, skip everything else */
+               if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
+                       continue;
+-
+               fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
+-
+-              /* inline extents live in the btree, they don't have refs */
+               if (btrfs_file_extent_type(leaf, fi) ==
+                   BTRFS_FILE_EXTENT_INLINE)
+                       continue;
+-
++              /*
++               * FIXME make sure to insert a trans record that
++               * repeats the snapshot del on crash
++               */
+               disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+-
+-              /* holes don't have refs */
+               if (disk_bytenr == 0)
+                       continue;
+-              sorted[refi].bytenr = disk_bytenr;
+-              sorted[refi].slot = i;
+-              refi++;
+-      }
+-
+-      if (refi == 0)
+-              goto out;
+-
+-      sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
+-
+-      for (i = 0; i < refi; i++) {
+-              u64 disk_bytenr;
+-
+-              disk_bytenr = sorted[i].bytenr;
+-              slot = sorted[i].slot;
+-
+-              cond_resched();
+-
+-              btrfs_item_key_to_cpu(leaf, &key, slot);
+-              if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
+-                      continue;
+-
+-              fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
+-
+               ret = __btrfs_free_extent(trans, root, disk_bytenr,
+                               btrfs_file_extent_disk_num_bytes(leaf, fi),
+                               leaf->start, leaf_owner, leaf_generation,
+@@ -3799,8 +3428,6 @@
+               wake_up(&root->fs_info->transaction_throttle);
+               cond_resched();
+       }
+-out:
+-      kfree(sorted);
+       return 0;
+ }
+@@ -3810,25 +3437,9 @@
+ {
+       int i;
+       int ret;
+-      struct btrfs_extent_info *info;
+-      struct refsort *sorted;
+-
+-      if (ref->nritems == 0)
+-              return 0;
++      struct btrfs_extent_info *info = ref->extents;
+-      sorted = kmalloc(sizeof(*sorted) * ref->nritems, GFP_NOFS);
+       for (i = 0; i < ref->nritems; i++) {
+-              sorted[i].bytenr = ref->extents[i].bytenr;
+-              sorted[i].slot = i;
+-      }
+-      sort(sorted, ref->nritems, sizeof(struct refsort), refsort_cmp, NULL);
+-
+-      /*
+-       * the items in the ref were sorted when the ref was inserted
+-       * into the ref cache, so this is already in order
+-       */
+-      for (i = 0; i < ref->nritems; i++) {
+-              info = ref->extents + sorted[i].slot;
+               ret = __btrfs_free_extent(trans, root, info->bytenr,
+                                         info->num_bytes, ref->bytenr,
+                                         ref->owner, ref->generation,
+@@ -3842,7 +3453,6 @@
+               info++;
+       }
+-      kfree(sorted);
+       return 0;
+ }
+@@ -3887,152 +3497,6 @@
+ }
+ /*
+- * this is used while deleting old snapshots, and it drops the refs
+- * on a whole subtree starting from a level 1 node.
+- *
+- * The idea is to sort all the leaf pointers, and then drop the
+- * ref on all the leaves in order.  Most of the time the leaves
+- * will have ref cache entries, so no leaf IOs will be required to
+- * find the extents they have references on.
+- *
+- * For each leaf, any references it has are also dropped in order
+- *
+- * This ends up dropping the references in something close to optimal
+- * order for reading and modifying the extent allocation tree.
+- */
+-static noinline int drop_level_one_refs(struct btrfs_trans_handle *trans,
+-                                      struct btrfs_root *root,
+-                                      struct btrfs_path *path)
+-{
+-      u64 bytenr;
+-      u64 root_owner;
+-      u64 root_gen;
+-      struct extent_buffer *eb = path->nodes[1];
+-      struct extent_buffer *leaf;
+-      struct btrfs_leaf_ref *ref;
+-      struct refsort *sorted = NULL;
+-      int nritems = btrfs_header_nritems(eb);
+-      int ret;
+-      int i;
+-      int refi = 0;
+-      int slot = path->slots[1];
+-      u32 blocksize = btrfs_level_size(root, 0);
+-      u32 refs;
+-
+-      if (nritems == 0)
+-              goto out;
+-
+-      root_owner = btrfs_header_owner(eb);
+-      root_gen = btrfs_header_generation(eb);
+-      sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
+-
+-      /*
+-       * step one, sort all the leaf pointers so we don't scribble
+-       * randomly into the extent allocation tree
+-       */
+-      for (i = slot; i < nritems; i++) {
+-              sorted[refi].bytenr = btrfs_node_blockptr(eb, i);
+-              sorted[refi].slot = i;
+-              refi++;
+-      }
+-
+-      /*
+-       * nritems won't be zero, but if we're picking up drop_snapshot
+-       * after a crash, slot might be > 0, so double check things
+-       * just in case.
+-       */
+-      if (refi == 0)
+-              goto out;
+-
+-      sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
+-
+-      /*
+-       * the first loop frees everything the leaves point to
+-       */
+-      for (i = 0; i < refi; i++) {
+-              u64 ptr_gen;
+-
+-              bytenr = sorted[i].bytenr;
+-
+-              /*
+-               * check the reference count on this leaf.  If it is > 1
+-               * we just decrement it below and don't update any
+-               * of the refs the leaf points to.
+-               */
+-              ret = drop_snap_lookup_refcount(root, bytenr, blocksize, &refs);
+-              BUG_ON(ret);
+-              if (refs != 1)
+-                      continue;
+-
+-              ptr_gen = btrfs_node_ptr_generation(eb, sorted[i].slot);
+-
+-              /*
+-               * the leaf only had one reference, which means the
+-               * only thing pointing to this leaf is the snapshot
+-               * we're deleting.  It isn't possible for the reference
+-               * count to increase again later
+-               *
+-               * The reference cache is checked for the leaf,
+-               * and if found we'll be able to drop any refs held by
+-               * the leaf without needing to read it in.
+-               */
+-              ref = btrfs_lookup_leaf_ref(root, bytenr);
+-              if (ref && ref->generation != ptr_gen) {
+-                      btrfs_free_leaf_ref(root, ref);
+-                      ref = NULL;
+-              }
+-              if (ref) {
+-                      ret = cache_drop_leaf_ref(trans, root, ref);
+-                      BUG_ON(ret);
+-                      btrfs_remove_leaf_ref(root, ref);
+-                      btrfs_free_leaf_ref(root, ref);
+-              } else {
+-                      /*
+-                       * the leaf wasn't in the reference cache, so
+-                       * we have to read it.
+-                       */
+-                      leaf = read_tree_block(root, bytenr, blocksize,
+-                                             ptr_gen);
+-                      ret = btrfs_drop_leaf_ref(trans, root, leaf);
+-                      BUG_ON(ret);
+-                      free_extent_buffer(leaf);
+-              }
+-              atomic_inc(&root->fs_info->throttle_gen);
+-              wake_up(&root->fs_info->transaction_throttle);
+-              cond_resched();
+-      }
+-
+-      /*
+-       * run through the loop again to free the refs on the leaves.
+-       * This is faster than doing it in the loop above because
+-       * the leaves are likely to be clustered together.  We end up
+-       * working in nice chunks on the extent allocation tree.
+-       */
+-      for (i = 0; i < refi; i++) {
+-              bytenr = sorted[i].bytenr;
+-              ret = __btrfs_free_extent(trans, root, bytenr,
+-                                      blocksize, eb->start,
+-                                      root_owner, root_gen, 0, 1);
+-              BUG_ON(ret);
+-
+-              atomic_inc(&root->fs_info->throttle_gen);
+-              wake_up(&root->fs_info->transaction_throttle);
+-              cond_resched();
+-      }
+-out:
+-      kfree(sorted);
+-
+-      /*
+-       * update the path to show we've processed the entire level 1
+-       * node.  This will get saved into the root's drop_snapshot_progress
+-       * field so these drops are not repeated again if this transaction
+-       * commits.
+-       */
+-      path->slots[1] = nritems;
+-      return 0;
+-}
+-
+-/*
+  * helper function for drop_snapshot, this walks down the tree dropping ref
+  * counts as it goes.
+  */
+@@ -4047,6 +3511,7 @@
+       struct extent_buffer *next;
+       struct extent_buffer *cur;
+       struct extent_buffer *parent;
++      struct btrfs_leaf_ref *ref;
+       u32 blocksize;
+       int ret;
+       u32 refs;
+@@ -4073,46 +3538,17 @@
+               if (path->slots[*level] >=
+                   btrfs_header_nritems(cur))
+                       break;
+-
+-              /* the new code goes down to level 1 and does all the
+-               * leaves pointed to that node in bulk.  So, this check
+-               * for level 0 will always be false.
+-               *
+-               * But, the disk format allows the drop_snapshot_progress
+-               * field in the root to leave things in a state where
+-               * a leaf will need cleaning up here.  If someone crashes
+-               * with the old code and then boots with the new code,
+-               * we might find a leaf here.
+-               */
+               if (*level == 0) {
+                       ret = btrfs_drop_leaf_ref(trans, root, cur);
+                       BUG_ON(ret);
+                       break;
+               }
+-
+-              /*
+-               * once we get to level one, process the whole node
+-               * at once, including everything below it.
+-               */
+-              if (*level == 1) {
+-                      ret = drop_level_one_refs(trans, root, path);
+-                      BUG_ON(ret);
+-                      break;
+-              }
+-
+               bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
+               ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
+               blocksize = btrfs_level_size(root, *level - 1);
+               ret = drop_snap_lookup_refcount(root, bytenr, blocksize, &refs);
+               BUG_ON(ret);
+-
+-              /*
+-               * if there is more than one reference, we don't need
+-               * to read that node to drop any references it has.  We
+-               * just drop the ref we hold on that node and move on to the
+-               * next slot in this level.
+-               */
+               if (refs != 1) {
+                       parent = path->nodes[*level];
+                       root_owner = btrfs_header_owner(parent);
+@@ -4131,12 +3567,46 @@
+                       continue;
+               }
+-
+               /*
+-               * we need to keep freeing things in the next level down.
+-               * read the block and loop around to process it
++               * at this point, we have a single ref, and since the
++               * only place referencing this extent is a dead root
++               * the reference count should never go higher.
++               * So, we don't need to check it again
+                */
+-              next = read_tree_block(root, bytenr, blocksize, ptr_gen);
++              if (*level == 1) {
++                      ref = btrfs_lookup_leaf_ref(root, bytenr);
++                      if (ref && ref->generation != ptr_gen) {
++                              btrfs_free_leaf_ref(root, ref);
++                              ref = NULL;
++                      }
++                      if (ref) {
++                              ret = cache_drop_leaf_ref(trans, root, ref);
++                              BUG_ON(ret);
++                              btrfs_remove_leaf_ref(root, ref);
++                              btrfs_free_leaf_ref(root, ref);
++                              *level = 0;
++                              break;
++                      }
++              }
++              next = btrfs_find_tree_block(root, bytenr, blocksize);
++              if (!next || !btrfs_buffer_uptodate(next, ptr_gen)) {
++                      free_extent_buffer(next);
++
++                      next = read_tree_block(root, bytenr, blocksize,
++                                             ptr_gen);
++                      cond_resched();
++#if 0
++                      /*
++                       * this is a debugging check and can go away
++                       * the ref should never go all the way down to 1
++                       * at this point
++                       */
++                      ret = lookup_extent_ref(NULL, root, bytenr, blocksize,
++                                              &refs);
++                      BUG_ON(ret);
++                      WARN_ON(refs != 1);
++#endif
++              }
+               WARN_ON(*level <= 0);
+               if (path->nodes[*level-1])
+                       free_extent_buffer(path->nodes[*level-1]);
+@@ -4161,16 +3631,11 @@
+       root_owner = btrfs_header_owner(parent);
+       root_gen = btrfs_header_generation(parent);
+-      /*
+-       * cleanup and free the reference on the last node
+-       * we processed
+-       */
+       ret = __btrfs_free_extent(trans, root, bytenr, blocksize,
+                                 parent->start, root_owner, root_gen,
+                                 *level, 1);
+       free_extent_buffer(path->nodes[*level]);
+       path->nodes[*level] = NULL;
+-
+       *level += 1;
+       BUG_ON(ret);
+@@ -4222,7 +3687,6 @@
+               next = read_tree_block(root, bytenr, blocksize, ptr_gen);
+               btrfs_tree_lock(next);
+-              btrfs_set_lock_blocking(next);
+               ret = btrfs_lookup_extent_ref(trans, root, bytenr, blocksize,
+                                             &refs);
+@@ -4290,13 +3754,6 @@
+               if (slot < btrfs_header_nritems(path->nodes[i]) - 1) {
+                       struct extent_buffer *node;
+                       struct btrfs_disk_key disk_key;
+-
+-                      /*
+-                       * there is more work to do in this level.
+-                       * Update the drop_progress marker to reflect
+-                       * the work we've done so far, and then bump
+-                       * the slot number
+-                       */
+                       node = path->nodes[i];
+                       path->slots[i]++;
+                       *level = i;
+@@ -4308,11 +3765,6 @@
+                       return 0;
+               } else {
+                       struct extent_buffer *parent;
+-
+-                      /*
+-                       * this whole node is done, free our reference
+-                       * on it and go up one level
+-                       */
+                       if (path->nodes[*level] == root->node)
+                               parent = path->nodes[*level];
+                       else
+@@ -4439,13 +3891,13 @@
+       path = btrfs_alloc_path();
+       BUG_ON(!path);
+-      btrfs_assert_tree_locked(parent);
++      BUG_ON(!btrfs_tree_locked(parent));
+       parent_level = btrfs_header_level(parent);
+       extent_buffer_get(parent);
+       path->nodes[parent_level] = parent;
+       path->slots[parent_level] = btrfs_header_nritems(parent);
+-      btrfs_assert_tree_locked(node);
++      BUG_ON(!btrfs_tree_locked(node));
+       level = btrfs_header_level(node);
+       extent_buffer_get(node);
+       path->nodes[level] = node;
+@@ -4992,7 +4444,7 @@
+       u64 lock_end = 0;
+       u64 num_bytes;
+       u64 ext_offset;
+-      u64 search_end = (u64)-1;
++      u64 first_pos;
+       u32 nritems;
+       int nr_scaned = 0;
+       int extent_locked = 0;
+@@ -5000,6 +4452,7 @@
+       int ret;
+       memcpy(&key, leaf_key, sizeof(key));
++      first_pos = INT_LIMIT(loff_t) - extent_key->offset;
+       if (ref_path->owner_objectid != BTRFS_MULTIPLE_OBJECTIDS) {
+               if (key.objectid < ref_path->owner_objectid ||
+                   (key.objectid == ref_path->owner_objectid &&
+@@ -5048,7 +4501,7 @@
+                       if ((key.objectid > ref_path->owner_objectid) ||
+                           (key.objectid == ref_path->owner_objectid &&
+                            key.type > BTRFS_EXTENT_DATA_KEY) ||
+-                          key.offset >= search_end)
++                          (key.offset >= first_pos + extent_key->offset))
+                               break;
+               }
+@@ -5081,10 +4534,8 @@
+               num_bytes = btrfs_file_extent_num_bytes(leaf, fi);
+               ext_offset = btrfs_file_extent_offset(leaf, fi);
+-              if (search_end == (u64)-1) {
+-                      search_end = key.offset - ext_offset +
+-                              btrfs_file_extent_ram_bytes(leaf, fi);
+-              }
++              if (first_pos > key.offset - ext_offset)
++                      first_pos = key.offset - ext_offset;
+               if (!extent_locked) {
+                       lock_start = key.offset;
+@@ -5273,7 +4724,7 @@
+               }
+ skip:
+               if (ref_path->owner_objectid != BTRFS_MULTIPLE_OBJECTIDS &&
+-                  key.offset >= search_end)
++                  key.offset >= first_pos + extent_key->offset)
+                       break;
+               cond_resched();
+@@ -5327,7 +4778,6 @@
+               ref->bytenr = buf->start;
+               ref->owner = btrfs_header_owner(buf);
+               ref->generation = btrfs_header_generation(buf);
+-
+               ret = btrfs_add_leaf_ref(root, ref, 0);
+               WARN_ON(ret);
+               btrfs_free_leaf_ref(root, ref);
+@@ -5901,9 +5351,7 @@
+                       prev_block = block_start;
+               }
+-              mutex_lock(&extent_root->fs_info->trans_mutex);
+               btrfs_record_root_in_trans(found_root);
+-              mutex_unlock(&extent_root->fs_info->trans_mutex);
+               if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) {
+                       /*
+                        * try to update data extent references while
+@@ -6341,7 +5789,6 @@
+ int btrfs_free_block_groups(struct btrfs_fs_info *info)
+ {
+       struct btrfs_block_group_cache *block_group;
+-      struct btrfs_space_info *space_info;
+       struct rb_node *n;
+       spin_lock(&info->block_group_cache_lock);
+@@ -6363,23 +5810,6 @@
+               spin_lock(&info->block_group_cache_lock);
+       }
+       spin_unlock(&info->block_group_cache_lock);
+-
+-      /* now that all the block groups are freed, go through and
+-       * free all the space_info structs.  This is only called during
+-       * the final stages of unmount, and so we know nobody is
+-       * using them.  We call synchronize_rcu() once before we start,
+-       * just to be on the safe side.
+-       */
+-      synchronize_rcu();
+-
+-      while(!list_empty(&info->space_info)) {
+-              space_info = list_entry(info->space_info.next,
+-                                      struct btrfs_space_info,
+-                                      list);
+-
+-              list_del(&space_info->list);
+-              kfree(space_info);
+-      }
+       return 0;
+ }
+@@ -6527,11 +5957,9 @@
+       path = btrfs_alloc_path();
+       BUG_ON(!path);
+-      spin_lock(&root->fs_info->block_group_cache_lock);
++      btrfs_remove_free_space_cache(block_group);
+       rb_erase(&block_group->cache_node,
+                &root->fs_info->block_group_cache_tree);
+-      spin_unlock(&root->fs_info->block_group_cache_lock);
+-      btrfs_remove_free_space_cache(block_group);
+       down_write(&block_group->space_info->groups_sem);
+       list_del(&block_group->list);
+       up_write(&block_group->space_info->groups_sem);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/file.c linux-2.6.29-rc3.owrt/fs/btrfs/file.c
+--- linux-2.6.29.owrt/fs/btrfs/file.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/file.c      2009-05-10 23:48:29.000000000 +0200
+@@ -29,6 +29,7 @@
+ #include <linux/writeback.h>
+ #include <linux/statfs.h>
+ #include <linux/compat.h>
++#include <linux/version.h>
+ #include "ctree.h"
+ #include "disk-io.h"
+ #include "transaction.h"
+@@ -1091,24 +1092,19 @@
+               WARN_ON(num_pages > nrptrs);
+               memset(pages, 0, sizeof(struct page *) * nrptrs);
+-              ret = btrfs_check_data_free_space(root, inode, write_bytes);
++              ret = btrfs_check_free_space(root, write_bytes, 0);
+               if (ret)
+                       goto out;
+               ret = prepare_pages(root, file, pages, num_pages,
+                                   pos, first_index, last_index,
+                                   write_bytes);
+-              if (ret) {
+-                      btrfs_free_reserved_data_space(root, inode,
+-                                                     write_bytes);
++              if (ret)
+                       goto out;
+-              }
+               ret = btrfs_copy_from_user(pos, num_pages,
+                                          write_bytes, pages, buf);
+               if (ret) {
+-                      btrfs_free_reserved_data_space(root, inode,
+-                                                     write_bytes);
+                       btrfs_drop_pages(pages, num_pages);
+                       goto out;
+               }
+@@ -1116,11 +1112,8 @@
+               ret = dirty_and_release_pages(NULL, root, file, pages,
+                                             num_pages, pos, write_bytes);
+               btrfs_drop_pages(pages, num_pages);
+-              if (ret) {
+-                      btrfs_free_reserved_data_space(root, inode,
+-                                                     write_bytes);
++              if (ret)
+                       goto out;
+-              }
+               if (will_write) {
+                       btrfs_fdatawrite_range(inode->i_mapping, pos,
+@@ -1144,8 +1137,6 @@
+       }
+ out:
+       mutex_unlock(&inode->i_mutex);
+-      if (ret)
+-              err = ret;
+ out_nolock:
+       kfree(pages);
+@@ -1224,15 +1215,15 @@
+       }
+       mutex_unlock(&root->fs_info->trans_mutex);
+-      root->log_batch++;
++      root->fs_info->tree_log_batch++;
+       filemap_fdatawrite(inode->i_mapping);
+       btrfs_wait_ordered_range(inode, 0, (u64)-1);
+-      root->log_batch++;
++      root->fs_info->tree_log_batch++;
+       /*
+        * ok we haven't committed the transaction yet, lets do a commit
+        */
+-      if (file && file->private_data)
++      if (file->private_data)
+               btrfs_ioctl_trans_end(file);
+       trans = btrfs_start_transaction(root, 1);
+@@ -1241,7 +1232,7 @@
+               goto out;
+       }
+-      ret = btrfs_log_dentry_safe(trans, root, dentry);
++      ret = btrfs_log_dentry_safe(trans, root, file->f_dentry);
+       if (ret < 0)
+               goto out;
+@@ -1255,7 +1246,7 @@
+        * file again, but that will end up using the synchronization
+        * inside btrfs_sync_log to keep things safe.
+        */
+-      mutex_unlock(&dentry->d_inode->i_mutex);
++      mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+       if (ret > 0) {
+               ret = btrfs_commit_transaction(trans, root);
+@@ -1263,7 +1254,7 @@
+               btrfs_sync_log(trans, root);
+               ret = btrfs_end_transaction(trans, root);
+       }
+-      mutex_lock(&dentry->d_inode->i_mutex);
++      mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ out:
+       return ret > 0 ? EIO : ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/inode.c linux-2.6.29-rc3.owrt/fs/btrfs/inode.c
+--- linux-2.6.29.owrt/fs/btrfs/inode.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/inode.c     2009-05-10 23:48:29.000000000 +0200
+@@ -34,6 +34,7 @@
+ #include <linux/statfs.h>
+ #include <linux/compat.h>
+ #include <linux/bit_spinlock.h>
++#include <linux/version.h>
+ #include <linux/xattr.h>
+ #include <linux/posix_acl.h>
+ #include <linux/falloc.h>
+@@ -50,7 +51,6 @@
+ #include "tree-log.h"
+ #include "ref-cache.h"
+ #include "compression.h"
+-#include "locking.h"
+ struct btrfs_iget_args {
+       u64 ino;
+@@ -91,14 +91,32 @@
+                                  u64 start, u64 end, int *page_started,
+                                  unsigned long *nr_written, int unlock);
+-static int btrfs_init_inode_security(struct inode *inode,  struct inode *dir)
++/*
++ * a very lame attempt at stopping writes when the FS is 85% full.  There
++ * are countless ways this is incorrect, but it is better than nothing.
++ */
++int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
++                         int for_del)
+ {
+-      int err;
++      u64 total;
++      u64 used;
++      u64 thresh;
++      int ret = 0;
+-      err = btrfs_init_acl(inode, dir);
+-      if (!err)
+-              err = btrfs_xattr_security_init(inode, dir);
+-      return err;
++      spin_lock(&root->fs_info->delalloc_lock);
++      total = btrfs_super_total_bytes(&root->fs_info->super_copy);
++      used = btrfs_super_bytes_used(&root->fs_info->super_copy);
++      if (for_del)
++              thresh = total * 90;
++      else
++              thresh = total * 85;
++
++      do_div(thresh, 100);
++
++      if (used + root->fs_info->delalloc_bytes + num_required > thresh)
++              ret = -ENOSPC;
++      spin_unlock(&root->fs_info->delalloc_lock);
++      return ret;
+ }
+ /*
+@@ -332,19 +350,6 @@
+       nr_pages = (end >> PAGE_CACHE_SHIFT) - (start >> PAGE_CACHE_SHIFT) + 1;
+       nr_pages = min(nr_pages, (128 * 1024UL) / PAGE_CACHE_SIZE);
+-      /*
+-       * we don't want to send crud past the end of i_size through
+-       * compression, that's just a waste of CPU time.  So, if the
+-       * end of the file is before the start of our current
+-       * requested range of bytes, we bail out to the uncompressed
+-       * cleanup code that can deal with all of this.
+-       *
+-       * It isn't really the fastest way to fix things, but this is a
+-       * very uncommon corner.
+-       */
+-      if (actual_end <= start)
+-              goto cleanup_and_bail_uncompressed;
+-
+       total_compressed = actual_end - start;
+       /* we want to make sure that amount of ram required to uncompress
+@@ -489,7 +494,6 @@
+                       goto again;
+               }
+       } else {
+-cleanup_and_bail_uncompressed:
+               /*
+                * No compression, but we still need to write the pages in
+                * the file we've been given so far.  redirty the locked
+@@ -1162,7 +1166,6 @@
+        */
+       if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+               struct btrfs_root *root = BTRFS_I(inode)->root;
+-              btrfs_delalloc_reserve_space(root, inode, end - start + 1);
+               spin_lock(&root->fs_info->delalloc_lock);
+               BTRFS_I(inode)->delalloc_bytes += end - start + 1;
+               root->fs_info->delalloc_bytes += end - start + 1;
+@@ -1196,12 +1199,9 @@
+                              (unsigned long long)end - start + 1,
+                              (unsigned long long)
+                              root->fs_info->delalloc_bytes);
+-                      btrfs_delalloc_free_space(root, inode, (u64)-1);
+                       root->fs_info->delalloc_bytes = 0;
+                       BTRFS_I(inode)->delalloc_bytes = 0;
+               } else {
+-                      btrfs_delalloc_free_space(root, inode,
+-                                                end - start + 1);
+                       root->fs_info->delalloc_bytes -= end - start + 1;
+                       BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
+               }
+@@ -1324,11 +1324,12 @@
+                            struct inode *inode, u64 file_offset,
+                            struct list_head *list)
+ {
++      struct list_head *cur;
+       struct btrfs_ordered_sum *sum;
+       btrfs_set_trans_block_group(trans, inode);
+-
+-      list_for_each_entry(sum, list, list) {
++      list_for_each(cur, list) {
++              sum = list_entry(cur, struct btrfs_ordered_sum, list);
+               btrfs_csum_file_blocks(trans,
+                      BTRFS_I(inode)->root->fs_info->csum_root, sum);
+       }
+@@ -2012,7 +2013,6 @@
+       BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
+       alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
+-
+       BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
+                                               alloc_group_block, 0);
+       btrfs_free_path(path);
+@@ -2039,7 +2039,6 @@
+               inode->i_mapping->backing_dev_info = &root->fs_info->bdi;
+               break;
+       default:
+-              inode->i_op = &btrfs_special_inode_operations;
+               init_special_inode(inode, inode->i_mode, rdev);
+               break;
+       }
+@@ -2109,7 +2108,6 @@
+               goto failed;
+       }
+-      btrfs_unlock_up_safe(path, 1);
+       leaf = path->nodes[0];
+       inode_item = btrfs_item_ptr(leaf, path->slots[0],
+                                 struct btrfs_inode_item);
+@@ -2221,6 +2219,10 @@
+       root = BTRFS_I(dir)->root;
++      ret = btrfs_check_free_space(root, 1, 1);
++      if (ret)
++              goto fail;
++
+       trans = btrfs_start_transaction(root, 1);
+       btrfs_set_trans_block_group(trans, dir);
+@@ -2233,6 +2235,7 @@
+       nr = trans->blocks_used;
+       btrfs_end_transaction_throttle(trans, root);
++fail:
+       btrfs_btree_balance_dirty(root, nr);
+       return ret;
+ }
+@@ -2255,6 +2258,10 @@
+               return -ENOTEMPTY;
+       }
++      ret = btrfs_check_free_space(root, 1, 1);
++      if (ret)
++              goto fail;
++
+       trans = btrfs_start_transaction(root, 1);
+       btrfs_set_trans_block_group(trans, dir);
+@@ -2271,6 +2278,7 @@
+ fail_trans:
+       nr = trans->blocks_used;
+       ret = btrfs_end_transaction_throttle(trans, root);
++fail:
+       btrfs_btree_balance_dirty(root, nr);
+       if (ret && !err)
+@@ -2421,8 +2429,6 @@
+                       ref->generation = leaf_gen;
+                       ref->nritems = 0;
+-                      btrfs_sort_leaf_ref(ref);
+-
+                       ret = btrfs_add_leaf_ref(root, ref, 0);
+                       WARN_ON(ret);
+                       btrfs_free_leaf_ref(root, ref);
+@@ -2470,7 +2476,7 @@
+       struct btrfs_path *path;
+       struct btrfs_key key;
+       struct btrfs_key found_key;
+-      u32 found_type = (u8)-1;
++      u32 found_type;
+       struct extent_buffer *leaf;
+       struct btrfs_file_extent_item *fi;
+       u64 extent_start = 0;
+@@ -2497,6 +2503,8 @@
+       key.offset = (u64)-1;
+       key.type = (u8)-1;
++      btrfs_init_path(path);
++
+ search_again:
+       ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+       if (ret < 0)
+@@ -2655,8 +2663,6 @@
+                       if (pending_del_nr)
+                               goto del_pending;
+                       btrfs_release_path(root, path);
+-                      if (found_type == BTRFS_INODE_ITEM_KEY)
+-                              break;
+                       goto search_again;
+               }
+@@ -2673,8 +2679,6 @@
+                       BUG_ON(ret);
+                       pending_del_nr = 0;
+                       btrfs_release_path(root, path);
+-                      if (found_type == BTRFS_INODE_ITEM_KEY)
+-                              break;
+                       goto search_again;
+               }
+       }
+@@ -2784,7 +2788,7 @@
+       if (size <= hole_start)
+               return 0;
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               return err;
+@@ -2980,7 +2984,6 @@
+       bi->last_trans = 0;
+       bi->logged_trans = 0;
+       bi->delalloc_bytes = 0;
+-      bi->reserved_bytes = 0;
+       bi->disk_i_size = 0;
+       bi->flags = 0;
+       bi->index_cnt = (u64)-1;
+@@ -3002,7 +3005,6 @@
+       inode->i_ino = args->ino;
+       init_btrfs_i(inode);
+       BTRFS_I(inode)->root = args->root;
+-      btrfs_set_inode_space_info(args->root, inode);
+       return 0;
+ }
+@@ -3263,7 +3265,7 @@
+       /* Reached end of directory/root. Bump pos past the last item. */
+       if (key_type == BTRFS_DIR_INDEX_KEY)
+-              filp->f_pos = INT_LIMIT(off_t);
++              filp->f_pos = INT_LIMIT(typeof(filp->f_pos));
+       else
+               filp->f_pos++;
+ nopos:
+@@ -3423,7 +3425,6 @@
+       BTRFS_I(inode)->index_cnt = 2;
+       BTRFS_I(inode)->root = root;
+       BTRFS_I(inode)->generation = trans->transid;
+-      btrfs_set_inode_space_info(root, inode);
+       if (mode & S_IFDIR)
+               owner = 0;
+@@ -3457,14 +3458,7 @@
+               root->highest_inode = objectid;
+       inode->i_uid = current_fsuid();
+-
+-      if (dir && (dir->i_mode & S_ISGID)) {
+-              inode->i_gid = dir->i_gid;
+-              if (S_ISDIR(mode))
+-                      mode |= S_ISGID;
+-      } else
+-              inode->i_gid = current_fsgid();
+-
++      inode->i_gid = current_fsgid();
+       inode->i_mode = mode;
+       inode->i_ino = objectid;
+       inode_set_bytes(inode, 0);
+@@ -3571,7 +3565,7 @@
+       if (!new_valid_dev(rdev))
+               return -EINVAL;
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               goto fail;
+@@ -3592,7 +3586,7 @@
+       if (IS_ERR(inode))
+               goto out_unlock;
+-      err = btrfs_init_inode_security(inode, dir);
++      err = btrfs_init_acl(inode, dir);
+       if (err) {
+               drop_inode = 1;
+               goto out_unlock;
+@@ -3634,7 +3628,7 @@
+       u64 objectid;
+       u64 index = 0;
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               goto fail;
+       trans = btrfs_start_transaction(root, 1);
+@@ -3655,7 +3649,7 @@
+       if (IS_ERR(inode))
+               goto out_unlock;
+-      err = btrfs_init_inode_security(inode, dir);
++      err = btrfs_init_acl(inode, dir);
+       if (err) {
+               drop_inode = 1;
+               goto out_unlock;
+@@ -3702,7 +3696,7 @@
+               return -ENOENT;
+       btrfs_inc_nlink(inode);
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               goto fail;
+       err = btrfs_set_inode_index(dir, &index);
+@@ -3748,7 +3742,7 @@
+       u64 index = 0;
+       unsigned long nr = 1;
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               goto out_unlock;
+@@ -3778,7 +3772,7 @@
+       drop_on_err = 1;
+-      err = btrfs_init_inode_security(inode, dir);
++      err = btrfs_init_acl(inode, dir);
+       if (err)
+               goto out_fail;
+@@ -4164,10 +4158,9 @@
+       return -EINVAL;
+ }
+-static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+-              __u64 start, __u64 len)
++static sector_t btrfs_bmap(struct address_space *mapping, sector_t iblock)
+ {
+-      return extent_fiemap(inode, fieinfo, start, len, btrfs_get_extent);
++      return extent_bmap(mapping, iblock, btrfs_get_extent);
+ }
+ int btrfs_readpage(struct file *file, struct page *page)
+@@ -4230,7 +4223,7 @@
+ {
+       if (PageWriteback(page) || PageDirty(page))
+               return 0;
+-      return __btrfs_releasepage(page, gfp_flags & GFP_NOFS);
++      return __btrfs_releasepage(page, gfp_flags);
+ }
+ static void btrfs_invalidatepage(struct page *page, unsigned long offset)
+@@ -4305,7 +4298,7 @@
+       u64 page_start;
+       u64 page_end;
+-      ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
++      ret = btrfs_check_free_space(root, PAGE_CACHE_SIZE, 0);
+       if (ret)
+               goto out;
+@@ -4318,7 +4311,6 @@
+       if ((page->mapping != inode->i_mapping) ||
+           (page_start >= size)) {
+-              btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+               /* page got truncated out from underneath us */
+               goto out_unlock;
+       }
+@@ -4601,7 +4593,7 @@
+       if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+               return -EXDEV;
+-      ret = btrfs_check_metadata_free_space(root);
++      ret = btrfs_check_free_space(root, 1, 0);
+       if (ret)
+               goto out_unlock;
+@@ -4719,7 +4711,7 @@
+       if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
+               return -ENAMETOOLONG;
+-      err = btrfs_check_metadata_free_space(root);
++      err = btrfs_check_free_space(root, 1, 0);
+       if (err)
+               goto out_fail;
+@@ -4741,7 +4733,7 @@
+       if (IS_ERR(inode))
+               goto out_unlock;
+-      err = btrfs_init_inode_security(inode, dir);
++      err = btrfs_init_acl(inode, dir);
+       if (err) {
+               drop_inode = 1;
+               goto out_unlock;
+@@ -4995,24 +4987,13 @@
+       .clear_bit_hook = btrfs_clear_bit_hook,
+ };
+-/*
+- * btrfs doesn't support the bmap operation because swapfiles
+- * use bmap to make a mapping of extents in the file.  They assume
+- * these extents won't change over the life of the file and they
+- * use the bmap result to do IO directly to the drive.
+- *
+- * the btrfs bmap call would return logical addresses that aren't
+- * suitable for IO and they also will change frequently as COW
+- * operations happen.  So, swapfile + btrfs == corruption.
+- *
+- * For now we're avoiding this by dropping bmap.
+- */
+ static struct address_space_operations btrfs_aops = {
+       .readpage       = btrfs_readpage,
+       .writepage      = btrfs_writepage,
+       .writepages     = btrfs_writepages,
+       .readpages      = btrfs_readpages,
+       .sync_page      = block_sync_page,
++      .bmap           = btrfs_bmap,
+       .direct_IO      = btrfs_direct_IO,
+       .invalidatepage = btrfs_invalidatepage,
+       .releasepage    = btrfs_releasepage,
+@@ -5036,7 +5017,6 @@
+       .removexattr    = btrfs_removexattr,
+       .permission     = btrfs_permission,
+       .fallocate      = btrfs_fallocate,
+-      .fiemap         = btrfs_fiemap,
+ };
+ static struct inode_operations btrfs_special_inode_operations = {
+       .getattr        = btrfs_getattr,
+@@ -5052,8 +5032,4 @@
+       .follow_link    = page_follow_link_light,
+       .put_link       = page_put_link,
+       .permission     = btrfs_permission,
+-      .setxattr       = btrfs_setxattr,
+-      .getxattr       = btrfs_getxattr,
+-      .listxattr      = btrfs_listxattr,
+-      .removexattr    = btrfs_removexattr,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/inode-map.c linux-2.6.29-rc3.owrt/fs/btrfs/inode-map.c
+--- linux-2.6.29.owrt/fs/btrfs/inode-map.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/inode-map.c 2009-05-10 23:48:29.000000000 +0200
+@@ -84,6 +84,7 @@
+       search_key.type = 0;
+       search_key.offset = 0;
++      btrfs_init_path(path);
+       start_found = 0;
+       ret = btrfs_search_slot(trans, root, &search_key, path, 0, 0);
+       if (ret < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ioctl.c linux-2.6.29-rc3.owrt/fs/btrfs/ioctl.c
+--- linux-2.6.29.owrt/fs/btrfs/ioctl.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ioctl.c     2009-05-10 23:48:29.000000000 +0200
+@@ -38,6 +38,7 @@
+ #include <linux/compat.h>
+ #include <linux/bit_spinlock.h>
+ #include <linux/security.h>
++#include <linux/version.h>
+ #include <linux/xattr.h>
+ #include <linux/vmalloc.h>
+ #include "compat.h"
+@@ -70,7 +71,7 @@
+       u64 index = 0;
+       unsigned long nr = 1;
+-      ret = btrfs_check_metadata_free_space(root);
++      ret = btrfs_check_free_space(root, 1, 0);
+       if (ret)
+               goto fail_commit;
+@@ -203,7 +204,7 @@
+       if (!root->ref_cows)
+               return -EINVAL;
+-      ret = btrfs_check_metadata_free_space(root);
++      ret = btrfs_check_free_space(root, 1, 0);
+       if (ret)
+               goto fail_unlock;
+@@ -374,7 +375,7 @@
+       unsigned long i;
+       int ret;
+-      ret = btrfs_check_data_free_space(root, inode, inode->i_size);
++      ret = btrfs_check_free_space(root, inode->i_size, 0);
+       if (ret)
+               return -ENOSPC;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/Kconfig linux-2.6.29-rc3.owrt/fs/btrfs/Kconfig
+--- linux-2.6.29.owrt/fs/btrfs/Kconfig 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/Kconfig     2009-05-10 23:48:29.000000000 +0200
+@@ -16,16 +16,3 @@
+         module will be called btrfs.
+         If unsure, say N.
+-
+-config BTRFS_FS_POSIX_ACL
+-      bool "Btrfs POSIX Access Control Lists"
+-      depends on BTRFS_FS
+-      select FS_POSIX_ACL
+-      help
+-        POSIX Access Control Lists (ACLs) support permissions for users and
+-        groups beyond the owner/group/world scheme.
+-
+-        To learn more about Access Control Lists, visit the POSIX ACLs for
+-        Linux website <http://acl.bestbits.at/>.
+-
+-        If you don't know what Access Control Lists are, say N
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/locking.c linux-2.6.29-rc3.owrt/fs/btrfs/locking.c
+--- linux-2.6.29.owrt/fs/btrfs/locking.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/locking.c   2009-05-10 23:48:29.000000000 +0200
+@@ -25,203 +25,64 @@
+ #include "extent_io.h"
+ #include "locking.h"
+-static inline void spin_nested(struct extent_buffer *eb)
+-{
+-      spin_lock(&eb->lock);
+-}
+-
+-/*
+- * Setting a lock to blocking will drop the spinlock and set the
+- * flag that forces other procs who want the lock to wait.  After
+- * this you can safely schedule with the lock held.
+- */
+-void btrfs_set_lock_blocking(struct extent_buffer *eb)
+-{
+-      if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags)) {
+-              set_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags);
+-              spin_unlock(&eb->lock);
+-      }
+-      /* exit with the spin lock released and the bit set */
+-}
+-
+ /*
+- * clearing the blocking flag will take the spinlock again.
+- * After this you can't safely schedule
+- */
+-void btrfs_clear_lock_blocking(struct extent_buffer *eb)
+-{
+-      if (test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags)) {
+-              spin_nested(eb);
+-              clear_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags);
+-              smp_mb__after_clear_bit();
+-      }
+-      /* exit with the spin lock held */
+-}
+-
+-/*
+- * unfortunately, many of the places that currently set a lock to blocking
+- * don't end up blocking for every long, and often they don't block
+- * at all.  For a dbench 50 run, if we don't spin one the blocking bit
+- * at all, the context switch rate can jump up to 400,000/sec or more.
++ * locks the per buffer mutex in an extent buffer.  This uses adaptive locks
++ * and the spin is not tuned very extensively.  The spinning does make a big
++ * difference in almost every workload, but spinning for the right amount of
++ * time needs some help.
+  *
+- * So, we're still stuck with this crummy spin on the blocking bit,
+- * at least until the most common causes of the short blocks
+- * can be dealt with.
++ * In general, we want to spin as long as the lock holder is doing btree
++ * searches, and we should give up if they are in more expensive code.
+  */
+-static int btrfs_spin_on_block(struct extent_buffer *eb)
++
++int btrfs_tree_lock(struct extent_buffer *eb)
+ {
+       int i;
++
++      if (mutex_trylock(&eb->mutex))
++              return 0;
+       for (i = 0; i < 512; i++) {
+               cpu_relax();
+-              if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-                      return 1;
+-              if (need_resched())
+-                      break;
++              if (mutex_trylock(&eb->mutex))
++                      return 0;
+       }
++      cpu_relax();
++      mutex_lock_nested(&eb->mutex, BTRFS_MAX_LEVEL - btrfs_header_level(eb));
+       return 0;
+ }
+-/*
+- * This is somewhat different from trylock.  It will take the
+- * spinlock but if it finds the lock is set to blocking, it will
+- * return without the lock held.
+- *
+- * returns 1 if it was able to take the lock and zero otherwise
+- *
+- * After this call, scheduling is not safe without first calling
+- * btrfs_set_lock_blocking()
+- */
+-int btrfs_try_spin_lock(struct extent_buffer *eb)
++int btrfs_try_tree_lock(struct extent_buffer *eb)
+ {
+-      int i;
+-
+-      spin_nested(eb);
+-      if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-              return 1;
+-      spin_unlock(&eb->lock);
+-
+-      /* spin for a bit on the BLOCKING flag */
+-      for (i = 0; i < 2; i++) {
+-              if (!btrfs_spin_on_block(eb))
+-                      break;
+-
+-              spin_nested(eb);
+-              if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-                      return 1;
+-              spin_unlock(&eb->lock);
+-      }
+-      return 0;
++      return mutex_trylock(&eb->mutex);
+ }
+-/*
+- * the autoremove wake function will return 0 if it tried to wake up
+- * a process that was already awake, which means that process won't
+- * count as an exclusive wakeup.  The waitq code will continue waking
+- * procs until it finds one that was actually sleeping.
+- *
+- * For btrfs, this isn't quite what we want.  We want a single proc
+- * to be notified that the lock is ready for taking.  If that proc
+- * already happen to be awake, great, it will loop around and try for
+- * the lock.
+- *
+- * So, btrfs_wake_function always returns 1, even when the proc that we
+- * tried to wake up was already awake.
+- */
+-static int btrfs_wake_function(wait_queue_t *wait, unsigned mode,
+-                             int sync, void *key)
++int btrfs_tree_unlock(struct extent_buffer *eb)
+ {
+-      autoremove_wake_function(wait, mode, sync, key);
+-      return 1;
++      mutex_unlock(&eb->mutex);
++      return 0;
+ }
+-/*
+- * returns with the extent buffer spinlocked.
+- *
+- * This will spin and/or wait as required to take the lock, and then
+- * return with the spinlock held.
+- *
+- * After this call, scheduling is not safe without first calling
+- * btrfs_set_lock_blocking()
+- */
+-int btrfs_tree_lock(struct extent_buffer *eb)
++int btrfs_tree_locked(struct extent_buffer *eb)
+ {
+-      DEFINE_WAIT(wait);
+-      wait.func = btrfs_wake_function;
+-
+-      while(1) {
+-              spin_nested(eb);
+-
+-              /* nobody is blocking, exit with the spinlock held */
+-              if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-                      return 0;
+-
+-              /*
+-               * we have the spinlock, but the real owner is blocking.
+-               * wait for them
+-               */
+-              spin_unlock(&eb->lock);
+-
+-              /*
+-               * spin for a bit, and if the blocking flag goes away,
+-               * loop around
+-               */
+-              if (btrfs_spin_on_block(eb))
+-                      continue;
+-
+-              prepare_to_wait_exclusive(&eb->lock_wq, &wait,
+-                                        TASK_UNINTERRUPTIBLE);
+-
+-              if (test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-                      schedule();
+-
+-              finish_wait(&eb->lock_wq, &wait);
+-      }
+-      return 0;
++      return mutex_is_locked(&eb->mutex);
+ }
+ /*
+- * Very quick trylock, this does not spin or schedule.  It returns
+- * 1 with the spinlock held if it was able to take the lock, or it
+- * returns zero if it was unable to take the lock.
+- *
+- * After this call, scheduling is not safe without first calling
+- * btrfs_set_lock_blocking()
++ * btrfs_search_slot uses this to decide if it should drop its locks
++ * before doing something expensive like allocating free blocks for cow.
+  */
+-int btrfs_try_tree_lock(struct extent_buffer *eb)
++int btrfs_path_lock_waiting(struct btrfs_path *path, int level)
+ {
+-      if (spin_trylock(&eb->lock)) {
+-              if (test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags)) {
+-                      /*
+-                       * we've got the spinlock, but the real owner is
+-                       * blocking.  Drop the spinlock and return failure
+-                       */
+-                      spin_unlock(&eb->lock);
+-                      return 0;
+-              }
+-              return 1;
++      int i;
++      struct extent_buffer *eb;
++      for (i = level; i <= level + 1 && i < BTRFS_MAX_LEVEL; i++) {
++              eb = path->nodes[i];
++              if (!eb)
++                      break;
++              smp_mb();
++              if (!list_empty(&eb->mutex.wait_list))
++                      return 1;
+       }
+-      /* someone else has the spinlock giveup */
+       return 0;
+ }
+-int btrfs_tree_unlock(struct extent_buffer *eb)
+-{
+-      /*
+-       * if we were a blocking owner, we don't have the spinlock held
+-       * just clear the bit and look for waiters
+-       */
+-      if (test_and_clear_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-              smp_mb__after_clear_bit();
+-      else
+-              spin_unlock(&eb->lock);
+-
+-      if (waitqueue_active(&eb->lock_wq))
+-              wake_up(&eb->lock_wq);
+-      return 0;
+-}
+-
+-void btrfs_assert_tree_locked(struct extent_buffer *eb)
+-{
+-      if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+-              assert_spin_locked(&eb->lock);
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/locking.h linux-2.6.29-rc3.owrt/fs/btrfs/locking.h
+--- linux-2.6.29.owrt/fs/btrfs/locking.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/locking.h   2009-05-10 23:48:29.000000000 +0200
+@@ -21,11 +21,7 @@
+ int btrfs_tree_lock(struct extent_buffer *eb);
+ int btrfs_tree_unlock(struct extent_buffer *eb);
+-
++int btrfs_tree_locked(struct extent_buffer *eb);
+ int btrfs_try_tree_lock(struct extent_buffer *eb);
+-int btrfs_try_spin_lock(struct extent_buffer *eb);
+-
+-void btrfs_set_lock_blocking(struct extent_buffer *eb);
+-void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+-void btrfs_assert_tree_locked(struct extent_buffer *eb);
++int btrfs_path_lock_waiting(struct btrfs_path *path, int level);
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ordered-data.c linux-2.6.29-rc3.owrt/fs/btrfs/ordered-data.c
+--- linux-2.6.29.owrt/fs/btrfs/ordered-data.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ordered-data.c      2009-05-10 23:48:29.000000000 +0200
+@@ -613,6 +613,7 @@
+       struct btrfs_sector_sum *sector_sums;
+       struct btrfs_ordered_extent *ordered;
+       struct btrfs_ordered_inode_tree *tree = &BTRFS_I(inode)->ordered_tree;
++      struct list_head *cur;
+       unsigned long num_sectors;
+       unsigned long i;
+       u32 sectorsize = BTRFS_I(inode)->root->sectorsize;
+@@ -623,7 +624,8 @@
+               return 1;
+       mutex_lock(&tree->mutex);
+-      list_for_each_entry_reverse(ordered_sum, &ordered->list, list) {
++      list_for_each_prev(cur, &ordered->list) {
++              ordered_sum = list_entry(cur, struct btrfs_ordered_sum, list);
+               if (disk_bytenr >= ordered_sum->bytenr) {
+                       num_sectors = ordered_sum->len / sectorsize;
+                       sector_sums = ordered_sum->sums;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ref-cache.c linux-2.6.29-rc3.owrt/fs/btrfs/ref-cache.c
+--- linux-2.6.29.owrt/fs/btrfs/ref-cache.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ref-cache.c 2009-05-10 23:48:29.000000000 +0200
+@@ -17,7 +17,6 @@
+  */
+ #include <linux/sched.h>
+-#include <linux/sort.h>
+ #include "ctree.h"
+ #include "ref-cache.h"
+ #include "transaction.h"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/ref-cache.h linux-2.6.29-rc3.owrt/fs/btrfs/ref-cache.h
+--- linux-2.6.29.owrt/fs/btrfs/ref-cache.h     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/ref-cache.h 2009-05-10 23:48:29.000000000 +0200
+@@ -73,4 +73,5 @@
+ int btrfs_remove_leaf_refs(struct btrfs_root *root, u64 max_root_gen,
+                          int shared);
+ int btrfs_remove_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref);
++
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/super.c linux-2.6.29-rc3.owrt/fs/btrfs/super.c
+--- linux-2.6.29.owrt/fs/btrfs/super.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/super.c     2009-05-10 23:48:29.000000000 +0200
+@@ -37,6 +37,7 @@
+ #include <linux/ctype.h>
+ #include <linux/namei.h>
+ #include <linux/miscdevice.h>
++#include <linux/version.h>
+ #include <linux/magic.h>
+ #include "compat.h"
+ #include "ctree.h"
+@@ -379,6 +380,7 @@
+       btrfs_start_delalloc_inodes(root);
+       btrfs_wait_ordered_extents(root, 0);
++      btrfs_clean_old_snapshots(root);
+       trans = btrfs_start_transaction(root, 1);
+       ret = btrfs_commit_transaction(trans, root);
+       sb->s_dirt = 0;
+@@ -510,10 +512,6 @@
+       struct btrfs_root *root = btrfs_sb(sb);
+       int ret;
+-      ret = btrfs_parse_options(root, data);
+-      if (ret)
+-              return -EINVAL;
+-
+       if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+               return 0;
+@@ -585,18 +583,17 @@
+       struct btrfs_ioctl_vol_args *vol;
+       struct btrfs_fs_devices *fs_devices;
+       int ret = -ENOTTY;
++      int len;
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+       vol = kmalloc(sizeof(*vol), GFP_KERNEL);
+-      if (!vol)
+-              return -ENOMEM;
+-
+       if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
+               ret = -EFAULT;
+               goto out;
+       }
++      len = strnlen(vol->name, BTRFS_PATH_NAME_MAX);
+       switch (cmd) {
+       case BTRFS_IOC_SCAN_DEV:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/transaction.c linux-2.6.29-rc3.owrt/fs/btrfs/transaction.c
+--- linux-2.6.29.owrt/fs/btrfs/transaction.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/transaction.c       2009-05-10 23:48:29.000000000 +0200
+@@ -688,9 +688,7 @@
+               num_bytes -= btrfs_root_used(&dirty->root->root_item);
+               bytes_used = btrfs_root_used(&root->root_item);
+               if (num_bytes) {
+-                      mutex_lock(&root->fs_info->trans_mutex);
+                       btrfs_record_root_in_trans(root);
+-                      mutex_unlock(&root->fs_info->trans_mutex);
+                       btrfs_set_root_used(&root->root_item,
+                                           bytes_used - num_bytes);
+               }
+@@ -854,9 +852,11 @@
+ {
+       struct btrfs_pending_snapshot *pending;
+       struct list_head *head = &trans->transaction->pending_snapshots;
++      struct list_head *cur;
+       int ret;
+-      list_for_each_entry(pending, head, list) {
++      list_for_each(cur, head) {
++              pending = list_entry(cur, struct btrfs_pending_snapshot, list);
+               ret = create_pending_snapshot(trans, fs_info, pending);
+               BUG_ON(ret);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/tree-defrag.c linux-2.6.29-rc3.owrt/fs/btrfs/tree-defrag.c
+--- linux-2.6.29.owrt/fs/btrfs/tree-defrag.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/tree-defrag.c       2009-05-10 23:48:29.000000000 +0200
+@@ -74,7 +74,6 @@
+               u32 nritems;
+               root_node = btrfs_lock_root_node(root);
+-              btrfs_set_lock_blocking(root_node);
+               nritems = btrfs_header_nritems(root_node);
+               root->defrag_max.objectid = 0;
+               /* from above we know this is not a leaf */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/tree-log.c linux-2.6.29-rc3.owrt/fs/btrfs/tree-log.c
+--- linux-2.6.29.owrt/fs/btrfs/tree-log.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/tree-log.c  2009-05-10 23:48:29.000000000 +0200
+@@ -78,6 +78,104 @@
+  */
+ /*
++ * btrfs_add_log_tree adds a new per-subvolume log tree into the
++ * tree of log tree roots.  This must be called with a tree log transaction
++ * running (see start_log_trans).
++ */
++static int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
++                    struct btrfs_root *root)
++{
++      struct btrfs_key key;
++      struct btrfs_root_item root_item;
++      struct btrfs_inode_item *inode_item;
++      struct extent_buffer *leaf;
++      struct btrfs_root *new_root = root;
++      int ret;
++      u64 objectid = root->root_key.objectid;
++
++      leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
++                                    BTRFS_TREE_LOG_OBJECTID,
++                                    trans->transid, 0, 0, 0);
++      if (IS_ERR(leaf)) {
++              ret = PTR_ERR(leaf);
++              return ret;
++      }
++
++      btrfs_set_header_nritems(leaf, 0);
++      btrfs_set_header_level(leaf, 0);
++      btrfs_set_header_bytenr(leaf, leaf->start);
++      btrfs_set_header_generation(leaf, trans->transid);
++      btrfs_set_header_owner(leaf, BTRFS_TREE_LOG_OBJECTID);
++
++      write_extent_buffer(leaf, root->fs_info->fsid,
++                          (unsigned long)btrfs_header_fsid(leaf),
++                          BTRFS_FSID_SIZE);
++      btrfs_mark_buffer_dirty(leaf);
++
++      inode_item = &root_item.inode;
++      memset(inode_item, 0, sizeof(*inode_item));
++      inode_item->generation = cpu_to_le64(1);
++      inode_item->size = cpu_to_le64(3);
++      inode_item->nlink = cpu_to_le32(1);
++      inode_item->nbytes = cpu_to_le64(root->leafsize);
++      inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
++
++      btrfs_set_root_bytenr(&root_item, leaf->start);
++      btrfs_set_root_generation(&root_item, trans->transid);
++      btrfs_set_root_level(&root_item, 0);
++      btrfs_set_root_refs(&root_item, 0);
++      btrfs_set_root_used(&root_item, 0);
++
++      memset(&root_item.drop_progress, 0, sizeof(root_item.drop_progress));
++      root_item.drop_level = 0;
++
++      btrfs_tree_unlock(leaf);
++      free_extent_buffer(leaf);
++      leaf = NULL;
++
++      btrfs_set_root_dirid(&root_item, 0);
++
++      key.objectid = BTRFS_TREE_LOG_OBJECTID;
++      key.offset = objectid;
++      btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
++      ret = btrfs_insert_root(trans, root->fs_info->log_root_tree, &key,
++                              &root_item);
++      if (ret)
++              goto fail;
++
++      new_root = btrfs_read_fs_root_no_radix(root->fs_info->log_root_tree,
++                                             &key);
++      BUG_ON(!new_root);
++
++      WARN_ON(root->log_root);
++      root->log_root = new_root;
++
++      /*
++       * log trees do not get reference counted because they go away
++       * before a real commit is actually done.  They do store pointers
++       * to file data extents, and those reference counts still get
++       * updated (along with back refs to the log tree).
++       */
++      new_root->ref_cows = 0;
++      new_root->last_trans = trans->transid;
++
++      /*
++       * we need to make sure the root block for this new tree
++       * is marked as dirty in the dirty_log_pages tree.  This
++       * is how it gets flushed down to disk at tree log commit time.
++       *
++       * the tree logging mutex keeps others from coming in and changing
++       * the new_root->node, so we can safely access it here
++       */
++      set_extent_dirty(&new_root->dirty_log_pages, new_root->node->start,
++                       new_root->node->start + new_root->node->len - 1,
++                       GFP_NOFS);
++
++fail:
++      return ret;
++}
++
++/*
+  * start a sub transaction and setup the log tree
+  * this increments the log tree writer count to make the people
+  * syncing the tree wait for us to finish
+@@ -86,14 +184,6 @@
+                          struct btrfs_root *root)
+ {
+       int ret;
+-
+-      mutex_lock(&root->log_mutex);
+-      if (root->log_root) {
+-              root->log_batch++;
+-              atomic_inc(&root->log_writers);
+-              mutex_unlock(&root->log_mutex);
+-              return 0;
+-      }
+       mutex_lock(&root->fs_info->tree_log_mutex);
+       if (!root->fs_info->log_root_tree) {
+               ret = btrfs_init_log_root_tree(trans, root->fs_info);
+@@ -103,10 +193,9 @@
+               ret = btrfs_add_log_tree(trans, root);
+               BUG_ON(ret);
+       }
++      atomic_inc(&root->fs_info->tree_log_writers);
++      root->fs_info->tree_log_batch++;
+       mutex_unlock(&root->fs_info->tree_log_mutex);
+-      root->log_batch++;
+-      atomic_inc(&root->log_writers);
+-      mutex_unlock(&root->log_mutex);
+       return 0;
+ }
+@@ -123,12 +212,13 @@
+       if (!root->log_root)
+               return -ENOENT;
+-      mutex_lock(&root->log_mutex);
++      mutex_lock(&root->fs_info->tree_log_mutex);
+       if (root->log_root) {
+               ret = 0;
+-              atomic_inc(&root->log_writers);
++              atomic_inc(&root->fs_info->tree_log_writers);
++              root->fs_info->tree_log_batch++;
+       }
+-      mutex_unlock(&root->log_mutex);
++      mutex_unlock(&root->fs_info->tree_log_mutex);
+       return ret;
+ }
+@@ -138,11 +228,10 @@
+  */
+ static int end_log_trans(struct btrfs_root *root)
+ {
+-      if (atomic_dec_and_test(&root->log_writers)) {
+-              smp_mb();
+-              if (waitqueue_active(&root->log_writer_wait))
+-                      wake_up(&root->log_writer_wait);
+-      }
++      atomic_dec(&root->fs_info->tree_log_writers);
++      smp_mb();
++      if (waitqueue_active(&root->fs_info->tree_log_wait))
++              wake_up(&root->fs_info->tree_log_wait);
+       return 0;
+ }
+@@ -1615,7 +1704,6 @@
+                               btrfs_tree_lock(next);
+                               clean_tree_block(trans, root, next);
+-                              btrfs_set_lock_blocking(next);
+                               btrfs_wait_tree_block_writeback(next);
+                               btrfs_tree_unlock(next);
+@@ -1662,7 +1750,6 @@
+               next = path->nodes[*level];
+               btrfs_tree_lock(next);
+               clean_tree_block(trans, root, next);
+-              btrfs_set_lock_blocking(next);
+               btrfs_wait_tree_block_writeback(next);
+               btrfs_tree_unlock(next);
+@@ -1720,7 +1807,6 @@
+                               btrfs_tree_lock(next);
+                               clean_tree_block(trans, root, next);
+-                              btrfs_set_lock_blocking(next);
+                               btrfs_wait_tree_block_writeback(next);
+                               btrfs_tree_unlock(next);
+@@ -1793,7 +1879,6 @@
+                       btrfs_tree_lock(next);
+                       clean_tree_block(trans, log, next);
+-                      btrfs_set_lock_blocking(next);
+                       btrfs_wait_tree_block_writeback(next);
+                       btrfs_tree_unlock(next);
+@@ -1817,65 +1902,26 @@
+               }
+       }
+       btrfs_free_path(path);
++      if (wc->free)
++              free_extent_buffer(log->node);
+       return ret;
+ }
+-/*
+- * helper function to update the item for a given subvolumes log root
+- * in the tree of log roots
+- */
+-static int update_log_root(struct btrfs_trans_handle *trans,
+-                         struct btrfs_root *log)
+-{
+-      int ret;
+-
+-      if (log->log_transid == 1) {
+-              /* insert root item on the first sync */
+-              ret = btrfs_insert_root(trans, log->fs_info->log_root_tree,
+-                              &log->root_key, &log->root_item);
+-      } else {
+-              ret = btrfs_update_root(trans, log->fs_info->log_root_tree,
+-                              &log->root_key, &log->root_item);
+-      }
+-      return ret;
+-}
+-
+-static int wait_log_commit(struct btrfs_root *root, unsigned long transid)
++static int wait_log_commit(struct btrfs_root *log)
+ {
+       DEFINE_WAIT(wait);
+-      int index = transid % 2;
++      u64 transid = log->fs_info->tree_log_transid;
+-      /*
+-       * we only allow two pending log transactions at a time,
+-       * so we know that if ours is more than 2 older than the
+-       * current transaction, we're done
+-       */
+       do {
+-              prepare_to_wait(&root->log_commit_wait[index],
+-                              &wait, TASK_UNINTERRUPTIBLE);
+-              mutex_unlock(&root->log_mutex);
+-              if (root->log_transid < transid + 2 &&
+-                  atomic_read(&root->log_commit[index]))
++              prepare_to_wait(&log->fs_info->tree_log_wait, &wait,
++                              TASK_UNINTERRUPTIBLE);
++              mutex_unlock(&log->fs_info->tree_log_mutex);
++              if (atomic_read(&log->fs_info->tree_log_commit))
+                       schedule();
+-              finish_wait(&root->log_commit_wait[index], &wait);
+-              mutex_lock(&root->log_mutex);
+-      } while (root->log_transid < transid + 2 &&
+-               atomic_read(&root->log_commit[index]));
+-      return 0;
+-}
+-
+-static int wait_for_writer(struct btrfs_root *root)
+-{
+-      DEFINE_WAIT(wait);
+-      while (atomic_read(&root->log_writers)) {
+-              prepare_to_wait(&root->log_writer_wait,
+-                              &wait, TASK_UNINTERRUPTIBLE);
+-              mutex_unlock(&root->log_mutex);
+-              if (atomic_read(&root->log_writers))
+-                      schedule();
+-              mutex_lock(&root->log_mutex);
+-              finish_wait(&root->log_writer_wait, &wait);
+-      }
++              finish_wait(&log->fs_info->tree_log_wait, &wait);
++              mutex_lock(&log->fs_info->tree_log_mutex);
++      } while (transid == log->fs_info->tree_log_transid &&
++              atomic_read(&log->fs_info->tree_log_commit));
+       return 0;
+ }
+@@ -1887,114 +1933,57 @@
+ int btrfs_sync_log(struct btrfs_trans_handle *trans,
+                  struct btrfs_root *root)
+ {
+-      int index1;
+-      int index2;
+       int ret;
++      unsigned long batch;
+       struct btrfs_root *log = root->log_root;
+-      struct btrfs_root *log_root_tree = root->fs_info->log_root_tree;
+-      mutex_lock(&root->log_mutex);
+-      index1 = root->log_transid % 2;
+-      if (atomic_read(&root->log_commit[index1])) {
+-              wait_log_commit(root, root->log_transid);
+-              mutex_unlock(&root->log_mutex);
+-              return 0;
++      mutex_lock(&log->fs_info->tree_log_mutex);
++      if (atomic_read(&log->fs_info->tree_log_commit)) {
++              wait_log_commit(log);
++              goto out;
+       }
+-      atomic_set(&root->log_commit[index1], 1);
+-
+-      /* wait for previous tree log sync to complete */
+-      if (atomic_read(&root->log_commit[(index1 + 1) % 2]))
+-              wait_log_commit(root, root->log_transid - 1);
++      atomic_set(&log->fs_info->tree_log_commit, 1);
+       while (1) {
+-              unsigned long batch = root->log_batch;
+-              mutex_unlock(&root->log_mutex);
++              batch = log->fs_info->tree_log_batch;
++              mutex_unlock(&log->fs_info->tree_log_mutex);
+               schedule_timeout_uninterruptible(1);
+-              mutex_lock(&root->log_mutex);
+-              wait_for_writer(root);
+-              if (batch == root->log_batch)
++              mutex_lock(&log->fs_info->tree_log_mutex);
++
++              while (atomic_read(&log->fs_info->tree_log_writers)) {
++                      DEFINE_WAIT(wait);
++                      prepare_to_wait(&log->fs_info->tree_log_wait, &wait,
++                                      TASK_UNINTERRUPTIBLE);
++                      mutex_unlock(&log->fs_info->tree_log_mutex);
++                      if (atomic_read(&log->fs_info->tree_log_writers))
++                              schedule();
++                      mutex_lock(&log->fs_info->tree_log_mutex);
++                      finish_wait(&log->fs_info->tree_log_wait, &wait);
++              }
++              if (batch == log->fs_info->tree_log_batch)
+                       break;
+       }
+       ret = btrfs_write_and_wait_marked_extents(log, &log->dirty_log_pages);
+       BUG_ON(ret);
+-
+-      btrfs_set_root_bytenr(&log->root_item, log->node->start);
+-      btrfs_set_root_generation(&log->root_item, trans->transid);
+-      btrfs_set_root_level(&log->root_item, btrfs_header_level(log->node));
+-
+-      root->log_batch = 0;
+-      root->log_transid++;
+-      log->log_transid = root->log_transid;
+-      smp_mb();
+-      /*
+-       * log tree has been flushed to disk, new modifications of
+-       * the log will be written to new positions. so it's safe to
+-       * allow log writers to go in.
+-       */
+-      mutex_unlock(&root->log_mutex);
+-
+-      mutex_lock(&log_root_tree->log_mutex);
+-      log_root_tree->log_batch++;
+-      atomic_inc(&log_root_tree->log_writers);
+-      mutex_unlock(&log_root_tree->log_mutex);
+-
+-      ret = update_log_root(trans, log);
+-      BUG_ON(ret);
+-
+-      mutex_lock(&log_root_tree->log_mutex);
+-      if (atomic_dec_and_test(&log_root_tree->log_writers)) {
+-              smp_mb();
+-              if (waitqueue_active(&log_root_tree->log_writer_wait))
+-                      wake_up(&log_root_tree->log_writer_wait);
+-      }
+-
+-      index2 = log_root_tree->log_transid % 2;
+-      if (atomic_read(&log_root_tree->log_commit[index2])) {
+-              wait_log_commit(log_root_tree, log_root_tree->log_transid);
+-              mutex_unlock(&log_root_tree->log_mutex);
+-              goto out;
+-      }
+-      atomic_set(&log_root_tree->log_commit[index2], 1);
+-
+-      if (atomic_read(&log_root_tree->log_commit[(index2 + 1) % 2]))
+-              wait_log_commit(log_root_tree, log_root_tree->log_transid - 1);
+-
+-      wait_for_writer(log_root_tree);
+-
+-      ret = btrfs_write_and_wait_marked_extents(log_root_tree,
+-                              &log_root_tree->dirty_log_pages);
++      ret = btrfs_write_and_wait_marked_extents(root->fs_info->log_root_tree,
++                             &root->fs_info->log_root_tree->dirty_log_pages);
+       BUG_ON(ret);
+       btrfs_set_super_log_root(&root->fs_info->super_for_commit,
+-                              log_root_tree->node->start);
++                               log->fs_info->log_root_tree->node->start);
+       btrfs_set_super_log_root_level(&root->fs_info->super_for_commit,
+-                              btrfs_header_level(log_root_tree->node));
+-
+-      log_root_tree->log_batch = 0;
+-      log_root_tree->log_transid++;
+-      smp_mb();
+-
+-      mutex_unlock(&log_root_tree->log_mutex);
+-
+-      /*
+-       * nobody else is going to jump in and write the the ctree
+-       * super here because the log_commit atomic below is protecting
+-       * us.  We must be called with a transaction handle pinning
+-       * the running transaction open, so a full commit can't hop
+-       * in and cause problems either.
+-       */
+-      write_ctree_super(trans, root->fs_info->tree_root, 2);
++                     btrfs_header_level(log->fs_info->log_root_tree->node));
+-      atomic_set(&log_root_tree->log_commit[index2], 0);
++      write_ctree_super(trans, log->fs_info->tree_root, 2);
++      log->fs_info->tree_log_transid++;
++      log->fs_info->tree_log_batch = 0;
++      atomic_set(&log->fs_info->tree_log_commit, 0);
+       smp_mb();
+-      if (waitqueue_active(&log_root_tree->log_commit_wait[index2]))
+-              wake_up(&log_root_tree->log_commit_wait[index2]);
++      if (waitqueue_active(&log->fs_info->tree_log_wait))
++              wake_up(&log->fs_info->tree_log_wait);
+ out:
+-      atomic_set(&root->log_commit[index1], 0);
+-      smp_mb();
+-      if (waitqueue_active(&root->log_commit_wait[index1]))
+-              wake_up(&root->log_commit_wait[index1]);
++      mutex_unlock(&log->fs_info->tree_log_mutex);
+       return 0;
+ }
+@@ -2030,18 +2019,38 @@
+                                  start, end, GFP_NOFS);
+       }
+-      if (log->log_transid > 0) {
+-              ret = btrfs_del_root(trans, root->fs_info->log_root_tree,
+-                                   &log->root_key);
+-              BUG_ON(ret);
+-      }
++      log = root->log_root;
++      ret = btrfs_del_root(trans, root->fs_info->log_root_tree,
++                           &log->root_key);
++      BUG_ON(ret);
+       root->log_root = NULL;
+-      free_extent_buffer(log->node);
+-      kfree(log);
++      kfree(root->log_root);
+       return 0;
+ }
+ /*
++ * helper function to update the item for a given subvolumes log root
++ * in the tree of log roots
++ */
++static int update_log_root(struct btrfs_trans_handle *trans,
++                         struct btrfs_root *log)
++{
++      u64 bytenr = btrfs_root_bytenr(&log->root_item);
++      int ret;
++
++      if (log->node->start == bytenr)
++              return 0;
++
++      btrfs_set_root_bytenr(&log->root_item, log->node->start);
++      btrfs_set_root_generation(&log->root_item, trans->transid);
++      btrfs_set_root_level(&log->root_item, btrfs_header_level(log->node));
++      ret = btrfs_update_root(trans, log->fs_info->log_root_tree,
++                              &log->root_key, &log->root_item);
++      BUG_ON(ret);
++      return ret;
++}
++
++/*
+  * If both a file and directory are logged, and unlinks or renames are
+  * mixed in, we have a few interesting corners:
+  *
+@@ -2702,6 +2711,11 @@
+       btrfs_free_path(path);
+       btrfs_free_path(dst_path);
++
++      mutex_lock(&root->fs_info->tree_log_mutex);
++      ret = update_log_root(trans, log);
++      BUG_ON(ret);
++      mutex_unlock(&root->fs_info->tree_log_mutex);
+ out:
+       return 0;
+ }
+@@ -2832,9 +2846,7 @@
+               BUG_ON(!wc.replay_dest);
+               wc.replay_dest->log_root = log;
+-              mutex_lock(&fs_info->trans_mutex);
+               btrfs_record_root_in_trans(wc.replay_dest);
+-              mutex_unlock(&fs_info->trans_mutex);
+               ret = walk_log_tree(trans, log, &wc);
+               BUG_ON(ret);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/volumes.c linux-2.6.29-rc3.owrt/fs/btrfs/volumes.c
+--- linux-2.6.29.owrt/fs/btrfs/volumes.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/volumes.c   2009-05-10 23:48:29.000000000 +0200
+@@ -20,6 +20,7 @@
+ #include <linux/buffer_head.h>
+ #include <linux/blkdev.h>
+ #include <linux/random.h>
++#include <linux/version.h>
+ #include <asm/div64.h>
+ #include "compat.h"
+ #include "ctree.h"
+@@ -103,8 +104,10 @@
+                                                  u64 devid, u8 *uuid)
+ {
+       struct btrfs_device *dev;
++      struct list_head *cur;
+-      list_for_each_entry(dev, head, dev_list) {
++      list_for_each(cur, head) {
++              dev = list_entry(cur, struct btrfs_device, dev_list);
+               if (dev->devid == devid &&
+                   (!uuid || !memcmp(dev->uuid, uuid, BTRFS_UUID_SIZE))) {
+                       return dev;
+@@ -115,9 +118,11 @@
+ static noinline struct btrfs_fs_devices *find_fsid(u8 *fsid)
+ {
++      struct list_head *cur;
+       struct btrfs_fs_devices *fs_devices;
+-      list_for_each_entry(fs_devices, &fs_uuids, list) {
++      list_for_each(cur, &fs_uuids) {
++              fs_devices = list_entry(cur, struct btrfs_fs_devices, list);
+               if (memcmp(fsid, fs_devices->fsid, BTRFS_FSID_SIZE) == 0)
+                       return fs_devices;
+       }
+@@ -154,7 +159,6 @@
+ loop:
+       spin_lock(&device->io_lock);
+-loop_lock:
+       /* take all the bios off the list at once and process them
+        * later on (without the lock held).  But, remember the
+        * tail and other pointers so the bios can be properly reinserted
+@@ -204,7 +208,7 @@
+                * is now congested.  Back off and let other work structs
+                * run instead
+                */
+-              if (pending && bdi_write_congested(bdi) && num_run > 16 &&
++              if (pending && bdi_write_congested(bdi) &&
+                   fs_info->fs_devices->open_devices > 1) {
+                       struct bio *old_head;
+@@ -216,8 +220,7 @@
+                               tail->bi_next = old_head;
+                       else
+                               device->pending_bio_tail = tail;
+-
+-                      device->running_pending = 1;
++                      device->running_pending = 0;
+                       spin_unlock(&device->io_lock);
+                       btrfs_requeue_work(&device->work);
+@@ -226,11 +229,6 @@
+       }
+       if (again)
+               goto loop;
+-
+-      spin_lock(&device->io_lock);
+-      if (device->pending_bios)
+-              goto loop_lock;
+-      spin_unlock(&device->io_lock);
+ done:
+       return 0;
+ }
+@@ -347,11 +345,14 @@
+ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices)
+ {
+-      struct btrfs_device *device, *next;
++      struct list_head *tmp;
++      struct list_head *cur;
++      struct btrfs_device *device;
+       mutex_lock(&uuid_mutex);
+ again:
+-      list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
++      list_for_each_safe(cur, tmp, &fs_devices->devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (device->in_fs_metadata)
+                       continue;
+@@ -382,12 +383,14 @@
+ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices)
+ {
++      struct list_head *cur;
+       struct btrfs_device *device;
+       if (--fs_devices->opened > 0)
+               return 0;
+-      list_for_each_entry(device, &fs_devices->devices, dev_list) {
++      list_for_each(cur, &fs_devices->devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (device->bdev) {
+                       close_bdev_exclusive(device->bdev, device->mode);
+                       fs_devices->open_devices--;
+@@ -436,6 +439,7 @@
+ {
+       struct block_device *bdev;
+       struct list_head *head = &fs_devices->devices;
++      struct list_head *cur;
+       struct btrfs_device *device;
+       struct block_device *latest_bdev = NULL;
+       struct buffer_head *bh;
+@@ -446,7 +450,8 @@
+       int seeding = 1;
+       int ret = 0;
+-      list_for_each_entry(device, head, dev_list) {
++      list_for_each(cur, head) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (device->bdev)
+                       continue;
+               if (!device->name)
+@@ -573,7 +578,7 @@
+                      *(unsigned long long *)disk_super->fsid,
+                      *(unsigned long long *)(disk_super->fsid + 8));
+       }
+-      printk(KERN_CONT "devid %llu transid %llu %s\n",
++      printk(KERN_INFO "devid %llu transid %llu %s\n",
+              (unsigned long long)devid, (unsigned long long)transid, path);
+       ret = device_list_add(path, disk_super, devid, fs_devices_ret);
+@@ -1012,12 +1017,14 @@
+       }
+       if (strcmp(device_path, "missing") == 0) {
++              struct list_head *cur;
+               struct list_head *devices;
+               struct btrfs_device *tmp;
+               device = NULL;
+               devices = &root->fs_info->fs_devices->devices;
+-              list_for_each_entry(tmp, devices, dev_list) {
++              list_for_each(cur, devices) {
++                      tmp = list_entry(cur, struct btrfs_device, dev_list);
+                       if (tmp->in_fs_metadata && !tmp->bdev) {
+                               device = tmp;
+                               break;
+@@ -1273,6 +1280,7 @@
+       struct btrfs_trans_handle *trans;
+       struct btrfs_device *device;
+       struct block_device *bdev;
++      struct list_head *cur;
+       struct list_head *devices;
+       struct super_block *sb = root->fs_info->sb;
+       u64 total_bytes;
+@@ -1296,7 +1304,8 @@
+       mutex_lock(&root->fs_info->volume_mutex);
+       devices = &root->fs_info->fs_devices->devices;
+-      list_for_each_entry(device, devices, dev_list) {
++      list_for_each(cur, devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               if (device->bdev == bdev) {
+                       ret = -EEXIST;
+                       goto error;
+@@ -1374,12 +1383,6 @@
+               ret = btrfs_add_device(trans, root, device);
+       }
+-      /*
+-       * we've got more storage, clear any full flags on the space
+-       * infos
+-       */
+-      btrfs_clear_space_info_full(root->fs_info);
+-
+       unlock_chunks(root);
+       btrfs_commit_transaction(trans, root);
+@@ -1465,8 +1468,6 @@
+       device->fs_devices->total_rw_bytes += diff;
+       device->total_bytes = new_size;
+-      btrfs_clear_space_info_full(device->dev_root->fs_info);
+-
+       return btrfs_update_device(trans, device);
+ }
+@@ -1703,6 +1704,7 @@
+ int btrfs_balance(struct btrfs_root *dev_root)
+ {
+       int ret;
++      struct list_head *cur;
+       struct list_head *devices = &dev_root->fs_info->fs_devices->devices;
+       struct btrfs_device *device;
+       u64 old_size;
+@@ -1721,7 +1723,8 @@
+       dev_root = dev_root->fs_info->dev_root;
+       /* step one make some room on all the devices */
+-      list_for_each_entry(device, devices, dev_list) {
++      list_for_each(cur, devices) {
++              device = list_entry(cur, struct btrfs_device, dev_list);
+               old_size = device->total_bytes;
+               size_to_free = div_factor(old_size, 1);
+               size_to_free = min(size_to_free, (u64)1 * 1024 * 1024);
+@@ -2902,6 +2905,10 @@
+               free_extent_map(em);
+       }
++      map = kzalloc(sizeof(*map), GFP_NOFS);
++      if (!map)
++              return -ENOMEM;
++
+       em = alloc_extent_map(GFP_NOFS);
+       if (!em)
+               return -ENOMEM;
+@@ -3110,8 +3117,6 @@
+       if (!sb)
+               return -ENOMEM;
+       btrfs_set_buffer_uptodate(sb);
+-      btrfs_set_buffer_lockdep_class(sb, 0);
+-
+       write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
+       array_size = btrfs_super_sys_array_size(super_copy);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/xattr.c linux-2.6.29-rc3.owrt/fs/btrfs/xattr.c
+--- linux-2.6.29.owrt/fs/btrfs/xattr.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/xattr.c     2009-05-10 23:48:29.000000000 +0200
+@@ -21,7 +21,6 @@
+ #include <linux/slab.h>
+ #include <linux/rwsem.h>
+ #include <linux/xattr.h>
+-#include <linux/security.h>
+ #include "ctree.h"
+ #include "btrfs_inode.h"
+ #include "transaction.h"
+@@ -46,12 +45,9 @@
+       /* lookup the xattr by name */
+       di = btrfs_lookup_xattr(NULL, root, path, inode->i_ino, name,
+                               strlen(name), 0);
+-      if (!di) {
++      if (!di || IS_ERR(di)) {
+               ret = -ENODATA;
+               goto out;
+-      } else if (IS_ERR(di)) {
+-              ret = PTR_ERR(di);
+-              goto out;
+       }
+       leaf = path->nodes[0];
+@@ -66,14 +62,6 @@
+               ret = -ERANGE;
+               goto out;
+       }
+-
+-      /*
+-       * The way things are packed into the leaf is like this
+-       * |struct btrfs_dir_item|name|data|
+-       * where name is the xattr name, so security.foo, and data is the
+-       * content of the xattr.  data_ptr points to the location in memory
+-       * where the data starts in the in memory leaf
+-       */
+       data_ptr = (unsigned long)((char *)(di + 1) +
+                                  btrfs_dir_name_len(leaf, di));
+       read_extent_buffer(leaf, buffer, data_ptr,
+@@ -98,7 +86,7 @@
+       if (!path)
+               return -ENOMEM;
+-      trans = btrfs_join_transaction(root, 1);
++      trans = btrfs_start_transaction(root, 1);
+       btrfs_set_trans_block_group(trans, inode);
+       /* first lets see if we already have this xattr */
+@@ -188,6 +176,7 @@
+       ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+       if (ret < 0)
+               goto err;
++      ret = 0;
+       advance = 0;
+       while (1) {
+               leaf = path->nodes[0];
+@@ -331,34 +320,3 @@
+               return -EOPNOTSUPP;
+       return __btrfs_setxattr(dentry->d_inode, name, NULL, 0, XATTR_REPLACE);
+ }
+-
+-int btrfs_xattr_security_init(struct inode *inode, struct inode *dir)
+-{
+-      int err;
+-      size_t len;
+-      void *value;
+-      char *suffix;
+-      char *name;
+-
+-      err = security_inode_init_security(inode, dir, &suffix, &value, &len);
+-      if (err) {
+-              if (err == -EOPNOTSUPP)
+-                      return 0;
+-              return err;
+-      }
+-
+-      name = kmalloc(XATTR_SECURITY_PREFIX_LEN + strlen(suffix) + 1,
+-                     GFP_NOFS);
+-      if (!name) {
+-              err = -ENOMEM;
+-      } else {
+-              strcpy(name, XATTR_SECURITY_PREFIX);
+-              strcpy(name + XATTR_SECURITY_PREFIX_LEN, suffix);
+-              err = __btrfs_setxattr(inode, name, value, len, 0);
+-              kfree(name);
+-      }
+-
+-      kfree(suffix);
+-      kfree(value);
+-      return err;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/btrfs/xattr.h linux-2.6.29-rc3.owrt/fs/btrfs/xattr.h
+--- linux-2.6.29.owrt/fs/btrfs/xattr.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/btrfs/xattr.h     2009-05-10 23:48:29.000000000 +0200
+@@ -36,6 +36,4 @@
+               const void *value, size_t size, int flags);
+ extern int btrfs_removexattr(struct dentry *dentry, const char *name);
+-extern int btrfs_xattr_security_init(struct inode *inode, struct inode *dir);
+-
+ #endif /* __XATTR__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/buffer.c linux-2.6.29-rc3.owrt/fs/buffer.c
+--- linux-2.6.29.owrt/fs/buffer.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/buffer.c  2009-05-10 23:48:29.000000000 +0200
+@@ -760,9 +760,15 @@
+  * If warn is true, then emit a warning if the page is not uptodate and has
+  * not been truncated.
+  */
+-static void __set_page_dirty(struct page *page,
++static int __set_page_dirty(struct page *page,
+               struct address_space *mapping, int warn)
+ {
++      if (unlikely(!mapping))
++              return !TestSetPageDirty(page);
++
++      if (TestSetPageDirty(page))
++              return 0;
++
+       spin_lock_irq(&mapping->tree_lock);
+       if (page->mapping) {    /* Race with truncate? */
+               WARN_ON_ONCE(warn && !PageUptodate(page));
+@@ -771,7 +777,6 @@
+                       __inc_zone_page_state(page, NR_FILE_DIRTY);
+                       __inc_bdi_stat(mapping->backing_dev_info,
+                                       BDI_RECLAIMABLE);
+-                      task_dirty_inc(current);
+                       task_io_account_write(PAGE_CACHE_SIZE);
+               }
+               radix_tree_tag_set(&mapping->page_tree,
+@@ -779,6 +784,8 @@
+       }
+       spin_unlock_irq(&mapping->tree_lock);
+       __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
++
++      return 1;
+ }
+ /*
+@@ -808,7 +815,6 @@
+  */
+ int __set_page_dirty_buffers(struct page *page)
+ {
+-      int newly_dirty;
+       struct address_space *mapping = page_mapping(page);
+       if (unlikely(!mapping))
+@@ -824,12 +830,9 @@
+                       bh = bh->b_this_page;
+               } while (bh != head);
+       }
+-      newly_dirty = !TestSetPageDirty(page);
+       spin_unlock(&mapping->private_lock);
+-      if (newly_dirty)
+-              __set_page_dirty(page, mapping, 1);
+-      return newly_dirty;
++      return __set_page_dirty(page, mapping, 1);
+ }
+ EXPORT_SYMBOL(__set_page_dirty_buffers);
+@@ -1258,11 +1261,8 @@
+                       return;
+       }
+-      if (!test_set_buffer_dirty(bh)) {
+-              struct page *page = bh->b_page;
+-              if (!TestSetPageDirty(page))
+-                      __set_page_dirty(page, page_mapping(page), 0);
+-      }
++      if (!test_set_buffer_dirty(bh))
++              __set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
+ }
+ /*
+@@ -2688,7 +2688,7 @@
+       struct buffer_head *bh;
+       BUG_ON(fsdata != NULL && page_has_buffers(page));
+-      if (unlikely(copied < len) && head)
++      if (unlikely(copied < len) && !page_has_buffers(page))
+               attach_nobh_buffers(page, head);
+       if (page_has_buffers(page))
+               return generic_write_end(file, mapping, pos, len,
+@@ -3108,7 +3108,7 @@
+       if (test_clear_buffer_dirty(bh)) {
+               get_bh(bh);
+               bh->b_end_io = end_buffer_write_sync;
+-              ret = submit_bh(WRITE, bh);
++              ret = submit_bh(WRITE_SYNC, bh);
+               wait_on_buffer(bh);
+               if (buffer_eopnotsupp(bh)) {
+                       clear_buffer_eopnotsupp(bh);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/CHANGES linux-2.6.29-rc3.owrt/fs/cifs/CHANGES
+--- linux-2.6.29.owrt/fs/cifs/CHANGES  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/CHANGES      2009-05-10 23:48:29.000000000 +0200
+@@ -1,13 +1,3 @@
+-Version 1.57
+-------------
+-Improve support for multiple security contexts to the same server. We
+-used to use the same "vcnumber" for all connections which could cause
+-the server to treat subsequent connections, especially those that
+-are authenticated as guest, as reconnections, invalidating the earlier
+-user's smb session.  This fix allows cifs to mount multiple times to the
+-same server with different userids without risking invalidating earlier
+-established security contexts.
+-
+ Version 1.56
+ ------------
+ Add "forcemandatorylock" mount option to allow user to use mandatory
+@@ -15,12 +5,7 @@
+ support posix byte range locks.  Fix query of root inode when prefixpath
+ specified and user does not have access to query information about the
+ top of the share.  Fix problem in 2.6.28 resolving DFS paths to
+-Samba servers (worked to Windows).  Fix rmdir so that pending search
+-(readdir) requests do not get invalid results which include the now
+-removed directory.  Fix oops in cifs_dfs_ref.c when prefixpath is not reachable
+-when using DFS.  Add better file create support to servers which support
+-the CIFS POSIX protocol extensions (this adds support for new flags
+-on create, and improves semantics for write of locked ranges).
++Samba servers (worked to Windows).
+ Version 1.55
+ ------------
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/cifsencrypt.c linux-2.6.29-rc3.owrt/fs/cifs/cifsencrypt.c
+--- linux-2.6.29.owrt/fs/cifs/cifsencrypt.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/cifsencrypt.c        2009-05-10 23:48:29.000000000 +0200
+@@ -48,11 +48,11 @@
+       if ((cifs_pdu == NULL) || (signature == NULL) || (key == NULL))
+               return -EINVAL;
+-      cifs_MD5_init(&context);
+-      cifs_MD5_update(&context, (char *)&key->data, key->len);
+-      cifs_MD5_update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
++      MD5Init(&context);
++      MD5Update(&context, (char *)&key->data, key->len);
++      MD5Update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
+-      cifs_MD5_final(signature, &context);
++      MD5Final(signature, &context);
+       return 0;
+ }
+@@ -96,8 +96,8 @@
+       if ((iov == NULL) || (signature == NULL) || (key == NULL))
+               return -EINVAL;
+-      cifs_MD5_init(&context);
+-      cifs_MD5_update(&context, (char *)&key->data, key->len);
++      MD5Init(&context);
++      MD5Update(&context, (char *)&key->data, key->len);
+       for (i = 0; i < n_vec; i++) {
+               if (iov[i].iov_len == 0)
+                       continue;
+@@ -110,13 +110,13 @@
+               if (i == 0) {
+                       if (iov[0].iov_len <= 8) /* cmd field at offset 9 */
+                               break; /* nothing to sign or corrupt header */
+-                      cifs_MD5_update(&context, iov[0].iov_base+4,
++                      MD5Update(&context, iov[0].iov_base+4,
+                                 iov[0].iov_len-4);
+               } else
+-                      cifs_MD5_update(&context, iov[i].iov_base, iov[i].iov_len);
++                      MD5Update(&context, iov[i].iov_base, iov[i].iov_len);
+       }
+-      cifs_MD5_final(signature, &context);
++      MD5Final(signature, &context);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/cifsfs.h linux-2.6.29-rc3.owrt/fs/cifs/cifsfs.h
+--- linux-2.6.29.owrt/fs/cifs/cifsfs.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/cifsfs.h     2009-05-10 23:48:29.000000000 +0200
+@@ -100,5 +100,5 @@
+ extern const struct export_operations cifs_export_ops;
+ #endif /* EXPERIMENTAL */
+-#define CIFS_VERSION   "1.57"
++#define CIFS_VERSION   "1.56"
+ #endif                                /* _CIFSFS_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/cifsglob.h linux-2.6.29-rc3.owrt/fs/cifs/cifsglob.h
+--- linux-2.6.29.owrt/fs/cifs/cifsglob.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/cifsglob.h   2009-05-10 23:48:29.000000000 +0200
+@@ -164,12 +164,9 @@
+       /* multiplexed reads or writes */
+       unsigned int maxBuf;    /* maxBuf specifies the maximum */
+       /* message size the server can send or receive for non-raw SMBs */
+-      unsigned int max_rw;    /* maxRw specifies the maximum */
++      unsigned int maxRw;     /* maxRw specifies the maximum */
+       /* message size the server can send or receive for */
+       /* SMB_COM_WRITE_RAW or SMB_COM_READ_RAW. */
+-      unsigned int max_vcs;   /* maximum number of smb sessions, at least
+-                                 those that can be specified uniquely with
+-                                 vcnumbers */
+       char sessid[4];         /* unique token id for this session */
+       /* (returned on Negotiate */
+       int capabilities; /* allow selective disabling of caps by smb sess */
+@@ -213,7 +210,6 @@
+       unsigned overrideSecFlg;  /* if non-zero override global sec flags */
+       __u16 ipc_tid;          /* special tid for connection to IPC share */
+       __u16 flags;
+-      __u16 vcnum;
+       char *serverOS;         /* name of operating system underlying server */
+       char *serverNOS;        /* name of network operating system of server */
+       char *serverDomain;     /* security realm of server */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/cifsproto.h linux-2.6.29-rc3.owrt/fs/cifs/cifsproto.h
+--- linux-2.6.29.owrt/fs/cifs/cifsproto.h      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/cifsproto.h  2009-05-10 23:48:29.000000000 +0200
+@@ -35,14 +35,13 @@
+ extern void cifs_buf_release(void *);
+ extern struct smb_hdr *cifs_small_buf_get(void);
+ extern void cifs_small_buf_release(void *);
+-extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *,
+-                      unsigned int /* length */);
++extern int smb_send(struct socket *, struct smb_hdr *,
++                      unsigned int /* length */ , struct sockaddr *, bool);
+ extern unsigned int _GetXid(void);
+ extern void _FreeXid(unsigned int);
+ #define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid()));
+ #define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__func__,curr_xid,(int)rc));}
+ extern char *build_path_from_dentry(struct dentry *);
+-extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
+ extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
+ /* extern void renew_parental_timestamps(struct dentry *direntry);*/
+ extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *,
+@@ -92,9 +91,6 @@
+ extern __le64 cnvrtDosCifsTm(__u16 date, __u16 time);
+ extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
+-extern void posix_fill_in_inode(struct inode *tmp_inode,
+-                              FILE_UNIX_BASIC_INFO *pData, int isNewInode);
+-extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
+ extern int cifs_get_inode_info(struct inode **pinode,
+                       const unsigned char *search_path,
+                       FILE_ALL_INFO *pfile_info,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/cifssmb.c linux-2.6.29-rc3.owrt/fs/cifs/cifssmb.c
+--- linux-2.6.29.owrt/fs/cifs/cifssmb.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/cifssmb.c    2009-05-10 23:48:29.000000000 +0200
+@@ -528,15 +528,14 @@
+               server->maxReq = le16_to_cpu(rsp->MaxMpxCount);
+               server->maxBuf = min((__u32)le16_to_cpu(rsp->MaxBufSize),
+                               (__u32)CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+-              server->max_vcs = le16_to_cpu(rsp->MaxNumberVcs);
+               GETU32(server->sessid) = le32_to_cpu(rsp->SessionKey);
+               /* even though we do not use raw we might as well set this
+               accurately, in case we ever find a need for it */
+               if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) {
+-                      server->max_rw = 0xFF00;
++                      server->maxRw = 0xFF00;
+                       server->capabilities = CAP_MPX_MODE | CAP_RAW_MODE;
+               } else {
+-                      server->max_rw = 0;/* do not need to use raw anyway */
++                      server->maxRw = 0;/* we do not need to use raw anyway */
+                       server->capabilities = CAP_MPX_MODE;
+               }
+               tmp = (__s16)le16_to_cpu(rsp->ServerTimeZone);
+@@ -639,7 +638,7 @@
+       /* probably no need to store and check maxvcs */
+       server->maxBuf = min(le32_to_cpu(pSMBr->MaxBufferSize),
+                       (__u32) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+-      server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
++      server->maxRw = le32_to_cpu(pSMBr->MaxRawSize);
+       cFYI(DBG2, ("Max buf = %d", ses->server->maxBuf));
+       GETU32(ses->server->sessid) = le32_to_cpu(pSMBr->SessionKey);
+       server->capabilities = le32_to_cpu(pSMBr->Capabilities);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/connect.c linux-2.6.29-rc3.owrt/fs/cifs/connect.c
+--- linux-2.6.29.owrt/fs/cifs/connect.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/connect.c    2009-05-10 23:48:29.000000000 +0200
+@@ -23,6 +23,7 @@
+ #include <linux/string.h>
+ #include <linux/list.h>
+ #include <linux/wait.h>
++#include <linux/ipv6.h>
+ #include <linux/pagemap.h>
+ #include <linux/ctype.h>
+ #include <linux/utsname.h>
+@@ -34,7 +35,6 @@
+ #include <linux/freezer.h>
+ #include <asm/uaccess.h>
+ #include <asm/processor.h>
+-#include <net/ipv6.h>
+ #include "cifspdu.h"
+ #include "cifsglob.h"
+ #include "cifsproto.h"
+@@ -1354,7 +1354,7 @@
+ }
+ static struct TCP_Server_Info *
+-cifs_find_tcp_session(struct sockaddr_storage *addr)
++cifs_find_tcp_session(struct sockaddr *addr)
+ {
+       struct list_head *tmp;
+       struct TCP_Server_Info *server;
+@@ -1374,13 +1374,13 @@
+               if (server->tcpStatus == CifsNew)
+                       continue;
+-              if (addr->ss_family == AF_INET &&
++              if (addr->sa_family == AF_INET &&
+                   (addr4->sin_addr.s_addr !=
+                    server->addr.sockAddr.sin_addr.s_addr))
+                       continue;
+-              else if (addr->ss_family == AF_INET6 &&
+-                       !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+-                                        &addr6->sin6_addr))
++              else if (addr->sa_family == AF_INET6 &&
++                       memcmp(&server->addr.sockAddr6.sin6_addr,
++                              &addr6->sin6_addr, sizeof(addr6->sin6_addr)))
+                       continue;
+               ++server->srv_count;
+@@ -1419,12 +1419,12 @@
+ cifs_get_tcp_session(struct smb_vol *volume_info)
+ {
+       struct TCP_Server_Info *tcp_ses = NULL;
+-      struct sockaddr_storage addr;
++      struct sockaddr addr;
+       struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr;
+       struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr;
+       int rc;
+-      memset(&addr, 0, sizeof(struct sockaddr_storage));
++      memset(&addr, 0, sizeof(struct sockaddr));
+       if (volume_info->UNCip && volume_info->UNC) {
+               rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
+@@ -1435,9 +1435,9 @@
+                       rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
+                                           &sin_server6->sin6_addr.in6_u);
+                       if (rc > 0)
+-                              addr.ss_family = AF_INET6;
++                              addr.sa_family = AF_INET6;
+               } else {
+-                      addr.ss_family = AF_INET;
++                      addr.sa_family = AF_INET;
+               }
+               if (rc <= 0) {
+@@ -1502,7 +1502,7 @@
+       tcp_ses->tcpStatus = CifsNew;
+       ++tcp_ses->srv_count;
+-      if (addr.ss_family == AF_INET6) {
++      if (addr.sa_family == AF_INET6) {
+               cFYI(1, ("attempting ipv6 connect"));
+               /* BB should we allow ipv6 on port 139? */
+               /* other OS never observed in Wild doing 139 with v6 */
+@@ -1802,7 +1802,7 @@
+        *  user space buffer
+        */
+       socket->sk->sk_rcvtimeo = 7 * HZ;
+-      socket->sk->sk_sndtimeo = 5 * HZ;
++      socket->sk->sk_sndtimeo = 3 * HZ;
+       /* make the bufsizes depend on wsize/rsize and max requests */
+       if (server->noautotune) {
+@@ -1860,7 +1860,9 @@
+                       smb_buf = (struct smb_hdr *)ses_init_buf;
+                       /* sizeof RFC1002_SESSION_REQUEST with no scope */
+                       smb_buf->smb_buf_length = 0x81000044;
+-                      rc = smb_send(server, smb_buf, 0x44);
++                      rc = smb_send(socket, smb_buf, 0x44,
++                              (struct sockaddr *) &server->addr.sockAddr,
++                              server->noblocksnd);
+                       kfree(ses_init_buf);
+                       msleep(1); /* RFC1001 layer in at least one server
+                                     requires very short break before negprot
+@@ -1953,7 +1955,7 @@
+        * user space buffer
+        */
+       socket->sk->sk_rcvtimeo = 7 * HZ;
+-      socket->sk->sk_sndtimeo = 5 * HZ;
++      socket->sk->sk_sndtimeo = 3 * HZ;
+       server->ssocket = socket;
+       return rc;
+@@ -2180,33 +2182,6 @@
+                          "mount option supported"));
+ }
+-static int
+-is_path_accessible(int xid, struct cifsTconInfo *tcon,
+-                 struct cifs_sb_info *cifs_sb, const char *full_path)
+-{
+-      int rc;
+-      __u64 inode_num;
+-      FILE_ALL_INFO *pfile_info;
+-
+-      rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num,
+-                                 cifs_sb->local_nls,
+-                                 cifs_sb->mnt_cifs_flags &
+-                                              CIFS_MOUNT_MAP_SPECIAL_CHR);
+-      if (rc != -EOPNOTSUPP)
+-              return rc;
+-
+-      pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
+-      if (pfile_info == NULL)
+-              return -ENOMEM;
+-
+-      rc = CIFSSMBQPathInfo(xid, tcon, full_path, pfile_info,
+-                            0 /* not legacy */, cifs_sb->local_nls,
+-                            cifs_sb->mnt_cifs_flags &
+-                              CIFS_MOUNT_MAP_SPECIAL_CHR);
+-      kfree(pfile_info);
+-      return rc;
+-}
+-
+ int
+ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
+          char *mount_data, const char *devname)
+@@ -2217,7 +2192,6 @@
+       struct cifsSesInfo *pSesInfo = NULL;
+       struct cifsTconInfo *tcon = NULL;
+       struct TCP_Server_Info *srvTcp = NULL;
+-      char   *full_path;
+       xid = GetXid();
+@@ -2454,23 +2428,6 @@
+               cifs_sb->rsize = min(cifs_sb->rsize,
+                              (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
+-      if (!rc && cifs_sb->prepathlen) {
+-              /* build_path_to_root works only when we have a valid tcon */
+-              full_path = cifs_build_path_to_root(cifs_sb);
+-              if (full_path == NULL) {
+-                      rc = -ENOMEM;
+-                      goto mount_fail_check;
+-              }
+-              rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
+-              if (rc) {
+-                      cERROR(1, ("Path %s in not accessible: %d",
+-                                              full_path, rc));
+-                      kfree(full_path);
+-                      goto mount_fail_check;
+-              }
+-              kfree(full_path);
+-      }
+-
+       /* volume_info->password is freed above when existing session found
+       (in which case it is not needed anymore) but when new sesion is created
+       the password ptr is put in the new session structure (in which case the
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/dir.c linux-2.6.29-rc3.owrt/fs/cifs/dir.c
+--- linux-2.6.29.owrt/fs/cifs/dir.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/dir.c        2009-05-10 23:48:29.000000000 +0200
+@@ -3,7 +3,7 @@
+  *
+  *   vfs operations that deal with dentries
+  *
+- *   Copyright (C) International Business Machines  Corp., 2002,2009
++ *   Copyright (C) International Business Machines  Corp., 2002,2008
+  *   Author(s): Steve French (sfrench@us.ibm.com)
+  *
+  *   This library is free software; you can redistribute it and/or modify
+@@ -129,89 +129,6 @@
+       return full_path;
+ }
+-static int cifs_posix_open(char *full_path, struct inode **pinode,
+-                  struct super_block *sb, int mode, int oflags,
+-                  int *poplock, __u16 *pnetfid, int xid)
+-{
+-      int rc;
+-      __u32 oplock;
+-      FILE_UNIX_BASIC_INFO *presp_data;
+-      __u32 posix_flags = 0;
+-      struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+-
+-      cFYI(1, ("posix open %s", full_path));
+-
+-      presp_data = kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
+-      if (presp_data == NULL)
+-              return -ENOMEM;
+-
+-/* So far cifs posix extensions can only map the following flags.
+-   There are other valid fmode oflags such as FMODE_LSEEK, FMODE_PREAD, but
+-   so far we do not seem to need them, and we can treat them as local only */
+-      if ((oflags & (FMODE_READ | FMODE_WRITE)) ==
+-              (FMODE_READ | FMODE_WRITE))
+-              posix_flags = SMB_O_RDWR;
+-      else if (oflags & FMODE_READ)
+-              posix_flags = SMB_O_RDONLY;
+-      else if (oflags & FMODE_WRITE)
+-              posix_flags = SMB_O_WRONLY;
+-      if (oflags & O_CREAT)
+-              posix_flags |= SMB_O_CREAT;
+-      if (oflags & O_EXCL)
+-              posix_flags |= SMB_O_EXCL;
+-      if (oflags & O_TRUNC)
+-              posix_flags |= SMB_O_TRUNC;
+-      if (oflags & O_APPEND)
+-              posix_flags |= SMB_O_APPEND;
+-      if (oflags & O_SYNC)
+-              posix_flags |= SMB_O_SYNC;
+-      if (oflags & O_DIRECTORY)
+-              posix_flags |= SMB_O_DIRECTORY;
+-      if (oflags & O_NOFOLLOW)
+-              posix_flags |= SMB_O_NOFOLLOW;
+-      if (oflags & O_DIRECT)
+-              posix_flags |= SMB_O_DIRECT;
+-
+-
+-      rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
+-                      pnetfid, presp_data, &oplock, full_path,
+-                      cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+-                                      CIFS_MOUNT_MAP_SPECIAL_CHR);
+-      if (rc)
+-              goto posix_open_ret;
+-
+-      if (presp_data->Type == cpu_to_le32(-1))
+-              goto posix_open_ret; /* open ok, caller does qpathinfo */
+-
+-      /* get new inode and set it up */
+-      if (!pinode)
+-              goto posix_open_ret; /* caller does not need info */
+-
+-      *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+-
+-      /* We do not need to close the file if new_inode fails since
+-         the caller will retry qpathinfo as long as inode is null */
+-      if (*pinode == NULL)
+-              goto posix_open_ret;
+-
+-      posix_fill_in_inode(*pinode, presp_data, 1);
+-
+-posix_open_ret:
+-      kfree(presp_data);
+-      return rc;
+-}
+-
+-static void setup_cifs_dentry(struct cifsTconInfo *tcon,
+-                            struct dentry *direntry,
+-                            struct inode *newinode)
+-{
+-      if (tcon->nocase)
+-              direntry->d_op = &cifs_ci_dentry_ops;
+-      else
+-              direntry->d_op = &cifs_dentry_ops;
+-      d_instantiate(direntry, newinode);
+-}
+-
+ /* Inode operations in similar order to how they appear in Linux file fs.h */
+ int
+@@ -222,21 +139,14 @@
+       int xid;
+       int create_options = CREATE_NOT_DIR;
+       int oplock = 0;
+-      int oflags;
+-      /*
+-       * BB below access is probably too much for mknod to request
+-       *    but we have to do query and setpathinfo so requesting
+-       *    less could fail (unless we want to request getatr and setatr
+-       *    permissions (only).  At least for POSIX we do not have to
+-       *    request so much.
+-       */
+       int desiredAccess = GENERIC_READ | GENERIC_WRITE;
+       __u16 fileHandle;
+       struct cifs_sb_info *cifs_sb;
+-      struct cifsTconInfo *tcon;
++      struct cifsTconInfo *pTcon;
+       char *full_path = NULL;
+       FILE_ALL_INFO *buf = NULL;
+       struct inode *newinode = NULL;
++      struct cifsFileInfo *pCifsFile = NULL;
+       struct cifsInodeInfo *pCifsInode;
+       int disposition = FILE_OVERWRITE_IF;
+       bool write_only = false;
+@@ -244,7 +154,7 @@
+       xid = GetXid();
+       cifs_sb = CIFS_SB(inode->i_sb);
+-      tcon = cifs_sb->tcon;
++      pTcon = cifs_sb->tcon;
+       full_path = build_path_from_dentry(direntry);
+       if (full_path == NULL) {
+@@ -252,44 +162,12 @@
+               return -ENOMEM;
+       }
+-      mode &= ~current->fs->umask;
+-      if (oplockEnabled)
+-              oplock = REQ_OPLOCK;
+-
+-      if (nd && (nd->flags & LOOKUP_OPEN))
+-              oflags = nd->intent.open.flags;
+-      else
+-              oflags = FMODE_READ;
+-
+-      if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
+-          (CIFS_UNIX_POSIX_PATH_OPS_CAP &
+-                      le64_to_cpu(tcon->fsUnixInfo.Capability))) {
+-              rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+-                                   mode, oflags, &oplock, &fileHandle, xid);
+-              /* EIO could indicate that (posix open) operation is not
+-                 supported, despite what server claimed in capability
+-                 negotation.  EREMOTE indicates DFS junction, which is not
+-                 handled in posix open */
+-
+-              if ((rc == 0) && (newinode == NULL))
+-                      goto cifs_create_get_file_info; /* query inode info */
+-              else if (rc == 0) /* success, no need to query */
+-                      goto cifs_create_set_dentry;
+-              else if ((rc != -EIO) && (rc != -EREMOTE) &&
+-                       (rc != -EOPNOTSUPP)) /* path not found or net err */
+-                      goto cifs_create_out;
+-              /* else fallthrough to retry, using older open call, this is
+-                 case where server does not support this SMB level, and
+-                 falsely claims capability (also get here for DFS case
+-                 which should be rare for path not covered on files) */
+-      }
+-
+       if (nd && (nd->flags & LOOKUP_OPEN)) {
+-              /* if the file is going to stay open, then we
+-                 need to set the desired access properly */
++              int oflags = nd->intent.open.flags;
++
+               desiredAccess = 0;
+               if (oflags & FMODE_READ)
+-                      desiredAccess |= GENERIC_READ; /* is this too little? */
++                      desiredAccess |= GENERIC_READ;
+               if (oflags & FMODE_WRITE) {
+                       desiredAccess |= GENERIC_WRITE;
+                       if (!(oflags & FMODE_READ))
+@@ -308,6 +186,8 @@
+       /* BB add processing to set equivalent of mode - e.g. via CreateX with
+          ACLs */
++      if (oplockEnabled)
++              oplock = REQ_OPLOCK;
+       buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
+       if (buf == NULL) {
+@@ -316,15 +196,17 @@
+               return -ENOMEM;
+       }
++      mode &= ~current->fs->umask;
++
+       /*
+        * if we're not using unix extensions, see if we need to set
+        * ATTR_READONLY on the create call
+        */
+-      if (!tcon->unix_ext && (mode & S_IWUGO) == 0)
++      if (!pTcon->unix_ext && (mode & S_IWUGO) == 0)
+               create_options |= CREATE_OPTION_READONLY;
+       if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS)
+-              rc = CIFSSMBOpen(xid, tcon, full_path, disposition,
++              rc = CIFSSMBOpen(xid, pTcon, full_path, disposition,
+                        desiredAccess, create_options,
+                        &fileHandle, &oplock, buf, cifs_sb->local_nls,
+                        cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+@@ -333,119 +215,128 @@
+       if (rc == -EIO) {
+               /* old server, retry the open legacy style */
+-              rc = SMBLegacyOpen(xid, tcon, full_path, disposition,
++              rc = SMBLegacyOpen(xid, pTcon, full_path, disposition,
+                       desiredAccess, create_options,
+                       &fileHandle, &oplock, buf, cifs_sb->local_nls,
+                       cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+       }
+       if (rc) {
+               cFYI(1, ("cifs_create returned 0x%x", rc));
+-              goto cifs_create_out;
+-      }
+-
+-      /* If Open reported that we actually created a file
+-         then we now have to set the mode if possible */
+-      if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+-              struct cifs_unix_set_info_args args = {
++      } else {
++              /* If Open reported that we actually created a file
++              then we now have to set the mode if possible */
++              if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
++                      struct cifs_unix_set_info_args args = {
+                               .mode   = mode,
+                               .ctime  = NO_CHANGE_64,
+                               .atime  = NO_CHANGE_64,
+                               .mtime  = NO_CHANGE_64,
+                               .device = 0,
+-              };
++                      };
+-              if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+-                      args.uid = (__u64) current_fsuid();
+-                      if (inode->i_mode & S_ISGID)
+-                              args.gid = (__u64) inode->i_gid;
+-                      else
+-                              args.gid = (__u64) current_fsgid();
+-              } else {
+-                      args.uid = NO_CHANGE_64;
+-                      args.gid = NO_CHANGE_64;
+-              }
+-              CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
+-                      cifs_sb->local_nls,
+-                      cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+-      } else {
+-              /* BB implement mode setting via Windows security
+-                 descriptors e.g. */
+-              /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/
+-
+-              /* Could set r/o dos attribute if mode & 0222 == 0 */
+-      }
+-
+-cifs_create_get_file_info:
+-      /* server might mask mode so we have to query for it */
+-      if (tcon->unix_ext)
+-              rc = cifs_get_inode_info_unix(&newinode, full_path,
+-                                            inode->i_sb, xid);
+-      else {
+-              rc = cifs_get_inode_info(&newinode, full_path, buf,
+-                                       inode->i_sb, xid, &fileHandle);
+-              if (newinode) {
+-                      if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+-                              newinode->i_mode = mode;
+-                      if ((oplock & CIFS_CREATE_ACTION) &&
+-                          (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+-                              newinode->i_uid = current_fsuid();
++                      if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
++                              args.uid = (__u64) current_fsuid();
+                               if (inode->i_mode & S_ISGID)
+-                                      newinode->i_gid = inode->i_gid;
++                                      args.gid = (__u64) inode->i_gid;
+                               else
+-                                      newinode->i_gid = current_fsgid();
++                                      args.gid = (__u64) current_fsgid();
++                      } else {
++                              args.uid = NO_CHANGE_64;
++                              args.gid = NO_CHANGE_64;
+                       }
++                      CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
++                              cifs_sb->local_nls,
++                              cifs_sb->mnt_cifs_flags &
++                                      CIFS_MOUNT_MAP_SPECIAL_CHR);
++              } else {
++                      /* BB implement mode setting via Windows security
++                         descriptors e.g. */
++                      /* CIFSSMBWinSetPerms(xid,pTcon,path,mode,-1,-1,nls);*/
++
++                      /* Could set r/o dos attribute if mode & 0222 == 0 */
+               }
+-      }
+-cifs_create_set_dentry:
+-      if (rc == 0)
+-              setup_cifs_dentry(tcon, direntry, newinode);
+-      else
+-              cFYI(1, ("Create worked, get_inode_info failed rc = %d", rc));
++              /* server might mask mode so we have to query for it */
++              if (pTcon->unix_ext)
++                      rc = cifs_get_inode_info_unix(&newinode, full_path,
++                                               inode->i_sb, xid);
++              else {
++                      rc = cifs_get_inode_info(&newinode, full_path,
++                                               buf, inode->i_sb, xid,
++                                               &fileHandle);
++                      if (newinode) {
++                              if (cifs_sb->mnt_cifs_flags &
++                                  CIFS_MOUNT_DYNPERM)
++                                      newinode->i_mode = mode;
++                              if ((oplock & CIFS_CREATE_ACTION) &&
++                                  (cifs_sb->mnt_cifs_flags &
++                                   CIFS_MOUNT_SET_UID)) {
++                                      newinode->i_uid = current_fsuid();
++                                      if (inode->i_mode & S_ISGID)
++                                              newinode->i_gid =
++                                                      inode->i_gid;
++                                      else
++                                              newinode->i_gid =
++                                                      current_fsgid();
++                              }
++                      }
++              }
+-      /* nfsd case - nfs srv does not set nd */
+-      if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
+-              /* mknod case - do not leave file open */
+-              CIFSSMBClose(xid, tcon, fileHandle);
+-      } else if (newinode) {
+-              struct cifsFileInfo *pCifsFile =
+-                      kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+-
+-              if (pCifsFile == NULL)
+-                      goto cifs_create_out;
+-              pCifsFile->netfid = fileHandle;
+-              pCifsFile->pid = current->tgid;
+-              pCifsFile->pInode = newinode;
+-              pCifsFile->invalidHandle = false;
+-              pCifsFile->closePend     = false;
+-              init_MUTEX(&pCifsFile->fh_sem);
+-              mutex_init(&pCifsFile->lock_mutex);
+-              INIT_LIST_HEAD(&pCifsFile->llist);
+-              atomic_set(&pCifsFile->wrtPending, 0);
++              if (rc != 0) {
++                      cFYI(1,
++                           ("Create worked but get_inode_info failed rc = %d",
++                            rc));
++              } else {
++                      if (pTcon->nocase)
++                              direntry->d_op = &cifs_ci_dentry_ops;
++                      else
++                              direntry->d_op = &cifs_dentry_ops;
++                      d_instantiate(direntry, newinode);
++              }
++              if ((nd == NULL /* nfsd case - nfs srv does not set nd */) ||
++                      (!(nd->flags & LOOKUP_OPEN))) {
++                      /* mknod case - do not leave file open */
++                      CIFSSMBClose(xid, pTcon, fileHandle);
++              } else if (newinode) {
++                      pCifsFile =
++                         kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
++
++                      if (pCifsFile == NULL)
++                              goto cifs_create_out;
++                      pCifsFile->netfid = fileHandle;
++                      pCifsFile->pid = current->tgid;
++                      pCifsFile->pInode = newinode;
++                      pCifsFile->invalidHandle = false;
++                      pCifsFile->closePend     = false;
++                      init_MUTEX(&pCifsFile->fh_sem);
++                      mutex_init(&pCifsFile->lock_mutex);
++                      INIT_LIST_HEAD(&pCifsFile->llist);
++                      atomic_set(&pCifsFile->wrtPending, 0);
+-              /* set the following in open now
++                      /* set the following in open now
+                               pCifsFile->pfile = file; */
+-              write_lock(&GlobalSMBSeslock);
+-              list_add(&pCifsFile->tlist, &tcon->openFileList);
+-              pCifsInode = CIFS_I(newinode);
+-              if (pCifsInode) {
+-                      /* if readable file instance put first in list*/
+-                      if (write_only) {
+-                              list_add_tail(&pCifsFile->flist,
+-                                            &pCifsInode->openFileList);
+-                      } else {
+-                              list_add(&pCifsFile->flist,
+-                                       &pCifsInode->openFileList);
++                      write_lock(&GlobalSMBSeslock);
++                      list_add(&pCifsFile->tlist, &pTcon->openFileList);
++                      pCifsInode = CIFS_I(newinode);
++                      if (pCifsInode) {
++                              /* if readable file instance put first in list*/
++                              if (write_only) {
++                                      list_add_tail(&pCifsFile->flist,
++                                              &pCifsInode->openFileList);
++                              } else {
++                                      list_add(&pCifsFile->flist,
++                                              &pCifsInode->openFileList);
++                              }
++                              if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
++                                      pCifsInode->clientCanCacheAll = true;
++                                      pCifsInode->clientCanCacheRead = true;
++                                      cFYI(1, ("Exclusive Oplock inode %p",
++                                              newinode));
++                              } else if ((oplock & 0xF) == OPLOCK_READ)
++                                      pCifsInode->clientCanCacheRead = true;
+                       }
+-                      if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+-                              pCifsInode->clientCanCacheAll = true;
+-                              pCifsInode->clientCanCacheRead = true;
+-                              cFYI(1, ("Exclusive Oplock inode %p",
+-                                      newinode));
+-                      } else if ((oplock & 0xF) == OPLOCK_READ)
+-                              pCifsInode->clientCanCacheRead = true;
++                      write_unlock(&GlobalSMBSeslock);
+               }
+-              write_unlock(&GlobalSMBSeslock);
+       }
+ cifs_create_out:
+       kfree(buf);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/inode.c linux-2.6.29-rc3.owrt/fs/cifs/inode.c
+--- linux-2.6.29.owrt/fs/cifs/inode.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/inode.c      2009-05-10 23:48:29.000000000 +0200
+@@ -199,49 +199,6 @@
+       pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
+ }
+-/**
+- * cifs_new inode - create new inode, initialize, and hash it
+- * @sb - pointer to superblock
+- * @inum - if valid pointer and serverino is enabled, replace i_ino with val
+- *
+- * Create a new inode, initialize it for CIFS and hash it. Returns the new
+- * inode or NULL if one couldn't be allocated.
+- *
+- * If the share isn't mounted with "serverino" or inum is a NULL pointer then
+- * we'll just use the inode number assigned by new_inode(). Note that this can
+- * mean i_ino collisions since the i_ino assigned by new_inode is not
+- * guaranteed to be unique.
+- */
+-struct inode *
+-cifs_new_inode(struct super_block *sb, __u64 *inum)
+-{
+-      struct inode *inode;
+-
+-      inode = new_inode(sb);
+-      if (inode == NULL)
+-              return NULL;
+-
+-      /*
+-       * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
+-       *     stop passing inum as ptr. Are there sanity checks we can use to
+-       *     ensure that the server is really filling in that field? Also,
+-       *     if serverino is disabled, perhaps we should be using iunique()?
+-       */
+-      if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
+-              inode->i_ino = (unsigned long) *inum;
+-
+-      /*
+-       * must set this here instead of cifs_alloc_inode since VFS will
+-       * clobber i_flags
+-       */
+-      if (sb->s_flags & MS_NOATIME)
+-              inode->i_flags |= S_NOATIME | S_NOCMTIME;
+-
+-      insert_inode_hash(inode);
+-
+-      return inode;
+-}
+-
+ int cifs_get_inode_info_unix(struct inode **pinode,
+       const unsigned char *full_path, struct super_block *sb, int xid)
+ {
+@@ -276,11 +233,22 @@
+       /* get new inode */
+       if (*pinode == NULL) {
+-              *pinode = cifs_new_inode(sb, &find_data.UniqueId);
++              *pinode = new_inode(sb);
+               if (*pinode == NULL) {
+                       rc = -ENOMEM;
+                       goto cgiiu_exit;
+               }
++              /* Is an i_ino of zero legal? */
++              /* note ino incremented to unique num in new_inode */
++              /* Are there sanity checks we can use to ensure that
++                 the server is really filling in that field? */
++              if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
++                      (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
++
++              if (sb->s_flags & MS_NOATIME)
++                      (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
++
++              insert_inode_hash(*pinode);
+       }
+       inode = *pinode;
+@@ -497,9 +465,11 @@
+       /* get new inode */
+       if (*pinode == NULL) {
+-              __u64 inode_num;
+-              __u64 *pinum = &inode_num;
+-
++              *pinode = new_inode(sb);
++              if (*pinode == NULL) {
++                      rc = -ENOMEM;
++                      goto cgii_exit;
++              }
+               /* Is an i_ino of zero legal? Can we use that to check
+                  if the server supports returning inode numbers?  Are
+                  there other sanity checks we can use to ensure that
+@@ -516,26 +486,22 @@
+               if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+                       int rc1 = 0;
++                      __u64 inode_num;
+                       rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
+-                                      full_path, pinum,
++                                      full_path, &inode_num,
+                                       cifs_sb->local_nls,
+                                       cifs_sb->mnt_cifs_flags &
+                                               CIFS_MOUNT_MAP_SPECIAL_CHR);
+                       if (rc1) {
+                               cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+-                              pinum = NULL;
+                               /* BB EOPNOSUPP disable SERVER_INUM? */
+-                      }
+-              } else {
+-                      pinum = NULL;
+-              }
+-
+-              *pinode = cifs_new_inode(sb, pinum);
+-              if (*pinode == NULL) {
+-                      rc = -ENOMEM;
+-                      goto cgii_exit;
+-              }
++                      } else /* do we need cast or hash to ino? */
++                              (*pinode)->i_ino = inode_num;
++              } /* else ino incremented to unique num in new_inode*/
++              if (sb->s_flags & MS_NOATIME)
++                      (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
++              insert_inode_hash(*pinode);
+       }
+       inode = *pinode;
+       cifsInfo = CIFS_I(inode);
+@@ -655,7 +621,7 @@
+       .lookup = cifs_lookup,
+ };
+-char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
++static char *build_path_to_root(struct cifs_sb_info *cifs_sb)
+ {
+       int pplen = cifs_sb->prepathlen;
+       int dfsplen;
+@@ -712,7 +678,7 @@
+               return inode;
+       cifs_sb = CIFS_SB(inode->i_sb);
+-      full_path = cifs_build_path_to_root(cifs_sb);
++      full_path = build_path_to_root(cifs_sb);
+       if (full_path == NULL)
+               return ERR_PTR(-ENOMEM);
+@@ -1051,7 +1017,7 @@
+       return rc;
+ }
+-void posix_fill_in_inode(struct inode *tmp_inode,
++static void posix_fill_in_inode(struct inode *tmp_inode,
+       FILE_UNIX_BASIC_INFO *pData, int isNewInode)
+ {
+       struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
+@@ -1148,14 +1114,24 @@
+                       else
+                               direntry->d_op = &cifs_dentry_ops;
+-                      newinode = cifs_new_inode(inode->i_sb,
+-                                                &pInfo->UniqueId);
++                      newinode = new_inode(inode->i_sb);
+                       if (newinode == NULL) {
+                               kfree(pInfo);
+                               goto mkdir_get_info;
+                       }
++                      /* Is an i_ino of zero legal? */
++                      /* Are there sanity checks we can use to ensure that
++                         the server is really filling in that field? */
++                      if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
++                              newinode->i_ino =
++                                      (unsigned long)pInfo->UniqueId;
++                      } /* note ino incremented to unique num in new_inode */
++                      if (inode->i_sb->s_flags & MS_NOATIME)
++                              newinode->i_flags |= S_NOATIME | S_NOCMTIME;
+                       newinode->i_nlink = 2;
++
++                      insert_inode_hash(newinode);
+                       d_instantiate(direntry, newinode);
+                       /* we already checked in POSIXCreate whether
+@@ -1309,11 +1285,6 @@
+       cifsInode = CIFS_I(direntry->d_inode);
+       cifsInode->time = 0;    /* force revalidate to go get info when
+                                  needed */
+-
+-      cifsInode = CIFS_I(inode);
+-      cifsInode->time = 0;    /* force revalidate to get parent dir info
+-                                 since cached search results now invalid */
+-
+       direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
+               current_fs_time(inode->i_sb);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/md5.c linux-2.6.29-rc3.owrt/fs/cifs/md5.c
+--- linux-2.6.29.owrt/fs/cifs/md5.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/md5.c        2009-05-10 23:48:29.000000000 +0200
+@@ -10,8 +10,8 @@
+  * with every copy.
+  *
+  * To compute the message digest of a chunk of bytes, declare an
+- * MD5Context structure, pass it to cifs_MD5_init, call cifs_MD5_update as
+- * needed on buffers full of bytes, and then call cifs_MD5_final, which
++ * MD5Context structure, pass it to MD5Init, call MD5Update as
++ * needed on buffers full of bytes, and then call MD5Final, which
+  * will fill a supplied 16-byte array with the digest.
+  */
+@@ -45,7 +45,7 @@
+  * initialization constants.
+  */
+ void
+-cifs_MD5_init(struct MD5Context *ctx)
++MD5Init(struct MD5Context *ctx)
+ {
+       ctx->buf[0] = 0x67452301;
+       ctx->buf[1] = 0xefcdab89;
+@@ -61,7 +61,7 @@
+  * of bytes.
+  */
+ void
+-cifs_MD5_update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
++MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
+ {
+       register __u32 t;
+@@ -110,7 +110,7 @@
+  * 1 0* (64-bit count of bits processed, MSB-first)
+  */
+ void
+-cifs_MD5_final(unsigned char digest[16], struct MD5Context *ctx)
++MD5Final(unsigned char digest[16], struct MD5Context *ctx)
+ {
+       unsigned int count;
+       unsigned char *p;
+@@ -165,7 +165,7 @@
+ /*
+  * The core of the MD5 algorithm, this alters an existing MD5 hash to
+- * reflect the addition of 16 longwords of new data.  cifs_MD5_update blocks
++ * reflect the addition of 16 longwords of new data.  MD5Update blocks
+  * the data and converts bytes into longwords for this routine.
+  */
+ static void
+@@ -267,9 +267,9 @@
+               unsigned char tk[16];
+               struct MD5Context tctx;
+-              cifs_MD5_init(&tctx);
+-              cifs_MD5_update(&tctx, key, key_len);
+-              cifs_MD5_final(tk, &tctx);
++              MD5Init(&tctx);
++              MD5Update(&tctx, key, key_len);
++              MD5Final(tk, &tctx);
+               key = tk;
+               key_len = 16;
+@@ -287,8 +287,8 @@
+               ctx->k_opad[i] ^= 0x5c;
+       }
+-      cifs_MD5_init(&ctx->ctx);
+-      cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64);
++      MD5Init(&ctx->ctx);
++      MD5Update(&ctx->ctx, ctx->k_ipad, 64);
+ }
+ #endif
+@@ -317,8 +317,8 @@
+               ctx->k_opad[i] ^= 0x5c;
+       }
+-      cifs_MD5_init(&ctx->ctx);
+-      cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64);
++      MD5Init(&ctx->ctx);
++      MD5Update(&ctx->ctx, ctx->k_ipad, 64);
+ }
+ /***********************************************************************
+@@ -328,7 +328,7 @@
+ hmac_md5_update(const unsigned char *text, int text_len,
+               struct HMACMD5Context *ctx)
+ {
+-      cifs_MD5_update(&ctx->ctx, text, text_len);     /* then text of datagram */
++      MD5Update(&ctx->ctx, text, text_len);   /* then text of datagram */
+ }
+ /***********************************************************************
+@@ -339,12 +339,12 @@
+ {
+       struct MD5Context ctx_o;
+-      cifs_MD5_final(digest, &ctx->ctx);
++      MD5Final(digest, &ctx->ctx);
+-      cifs_MD5_init(&ctx_o);
+-      cifs_MD5_update(&ctx_o, ctx->k_opad, 64);
+-      cifs_MD5_update(&ctx_o, digest, 16);
+-      cifs_MD5_final(digest, &ctx_o);
++      MD5Init(&ctx_o);
++      MD5Update(&ctx_o, ctx->k_opad, 64);
++      MD5Update(&ctx_o, digest, 16);
++      MD5Final(digest, &ctx_o);
+ }
+ /***********************************************************
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/md5.h linux-2.6.29-rc3.owrt/fs/cifs/md5.h
+--- linux-2.6.29.owrt/fs/cifs/md5.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/md5.h        2009-05-10 23:48:29.000000000 +0200
+@@ -20,10 +20,10 @@
+ };
+ #endif                                /* _HMAC_MD5_H */
+-void cifs_MD5_init(struct MD5Context *context);
+-void cifs_MD5_update(struct MD5Context *context, unsigned char const *buf,
++void MD5Init(struct MD5Context *context);
++void MD5Update(struct MD5Context *context, unsigned char const *buf,
+                       unsigned len);
+-void cifs_MD5_final(unsigned char digest[16], struct MD5Context *context);
++void MD5Final(unsigned char digest[16], struct MD5Context *context);
+ /* The following definitions come from lib/hmacmd5.c  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/readdir.c linux-2.6.29-rc3.owrt/fs/cifs/readdir.c
+--- linux-2.6.29.owrt/fs/cifs/readdir.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/readdir.c    2009-05-10 23:48:29.000000000 +0200
+@@ -56,34 +56,35 @@
+ }
+ #endif /* DEBUG2 */
+-/* Returns 1 if new inode created, 2 if both dentry and inode were */
++/* Returns one if new inode created (which therefore needs to be hashed) */
+ /* Might check in the future if inode number changed so we can rehash inode */
+-static int
+-construct_dentry(struct qstr *qstring, struct file *file,
+-               struct inode **ptmp_inode, struct dentry **pnew_dentry,
+-               __u64 *inum)
++static int construct_dentry(struct qstr *qstring, struct file *file,
++      struct inode **ptmp_inode, struct dentry **pnew_dentry)
+ {
+-      struct dentry *tmp_dentry = NULL;
+-      struct super_block *sb = file->f_path.dentry->d_sb;
++      struct dentry *tmp_dentry;
++      struct cifs_sb_info *cifs_sb;
++      struct cifsTconInfo *pTcon;
+       int rc = 0;
+       cFYI(1, ("For %s", qstring->name));
++      cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
++      pTcon = cifs_sb->tcon;
+       qstring->hash = full_name_hash(qstring->name, qstring->len);
+       tmp_dentry = d_lookup(file->f_path.dentry, qstring);
+       if (tmp_dentry) {
+-              /* BB: overwrite old name? i.e. tmp_dentry->d_name and
+-               * tmp_dentry->d_name.len??
+-               */
+               cFYI(0, ("existing dentry with inode 0x%p",
+                        tmp_dentry->d_inode));
+               *ptmp_inode = tmp_dentry->d_inode;
++/* BB overwrite old name? i.e. tmp_dentry->d_name and tmp_dentry->d_name.len??*/
+               if (*ptmp_inode == NULL) {
+-                      *ptmp_inode = cifs_new_inode(sb, inum);
++                      *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
+                       if (*ptmp_inode == NULL)
+                               return rc;
+                       rc = 1;
+               }
++              if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
++                      (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
+       } else {
+               tmp_dentry = d_alloc(file->f_path.dentry, qstring);
+               if (tmp_dentry == NULL) {
+@@ -92,14 +93,15 @@
+                       return rc;
+               }
+-              if (CIFS_SB(sb)->tcon->nocase)
++              *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
++              if (pTcon->nocase)
+                       tmp_dentry->d_op = &cifs_ci_dentry_ops;
+               else
+                       tmp_dentry->d_op = &cifs_dentry_ops;
+-
+-              *ptmp_inode = cifs_new_inode(sb, inum);
+               if (*ptmp_inode == NULL)
+                       return rc;
++              if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
++                      (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
+               rc = 2;
+       }
+@@ -820,7 +822,7 @@
+ /* inode num, inode type and filename returned */
+ static int cifs_get_name_from_search_buf(struct qstr *pqst,
+       char *current_entry, __u16 level, unsigned int unicode,
+-      struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
++      struct cifs_sb_info *cifs_sb, int max_len, ino_t *pinum)
+ {
+       int rc = 0;
+       unsigned int len = 0;
+@@ -840,7 +842,9 @@
+                       len = strnlen(filename, PATH_MAX);
+               }
+-              *pinum = pFindData->UniqueId;
++              /* BB fixme - hash low and high 32 bits if not 64 bit arch BB */
++              if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
++                      *pinum = pFindData->UniqueId;
+       } else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
+               FILE_DIRECTORY_INFO *pFindData =
+                       (FILE_DIRECTORY_INFO *)current_entry;
+@@ -903,7 +907,7 @@
+       struct qstr qstring;
+       struct cifsFileInfo *pCifsF;
+       unsigned int obj_type;
+-      __u64  inum;
++      ino_t  inum;
+       struct cifs_sb_info *cifs_sb;
+       struct inode *tmp_inode;
+       struct dentry *tmp_dentry;
+@@ -936,18 +940,20 @@
+       if (rc)
+               return rc;
+-      /* only these two infolevels return valid inode numbers */
+-      if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
+-          pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+-              rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+-                                      &inum);
+-      else
+-              rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+-                                      NULL);
+-
++      rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry);
+       if ((tmp_inode == NULL) || (tmp_dentry == NULL))
+               return -ENOMEM;
++      if (rc) {
++              /* inode created, we need to hash it with right inode number */
++              if (inum != 0) {
++                      /* BB fixme - hash the 2 32 quantities bits together if
++                       *  necessary BB */
++                      tmp_inode->i_ino = inum;
++              }
++              insert_inode_hash(tmp_inode);
++      }
++
+       /* we pass in rc below, indicating whether it is a new inode,
+          so we can figure out whether to invalidate the inode cached
+          data if the file has changed */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/sess.c linux-2.6.29-rc3.owrt/fs/cifs/sess.c
+--- linux-2.6.29.owrt/fs/cifs/sess.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/sess.c       2009-05-10 23:48:29.000000000 +0200
+@@ -34,99 +34,15 @@
+ extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
+                        unsigned char *p24);
+-/* Checks if this is the first smb session to be reconnected after
+-   the socket has been reestablished (so we know whether to use vc 0).
+-   Called while holding the cifs_tcp_ses_lock, so do not block */
+-static bool is_first_ses_reconnect(struct cifsSesInfo *ses)
+-{
+-      struct list_head *tmp;
+-      struct cifsSesInfo *tmp_ses;
+-
+-      list_for_each(tmp, &ses->server->smb_ses_list) {
+-              tmp_ses = list_entry(tmp, struct cifsSesInfo,
+-                                   smb_ses_list);
+-              if (tmp_ses->need_reconnect == false)
+-                      return false;
+-      }
+-      /* could not find a session that was already connected,
+-         this must be the first one we are reconnecting */
+-      return true;
+-}
+-
+-/*
+- *    vc number 0 is treated specially by some servers, and should be the
+- *      first one we request.  After that we can use vcnumbers up to maxvcs,
+- *    one for each smb session (some Windows versions set maxvcs incorrectly
+- *    so maxvc=1 can be ignored).  If we have too many vcs, we can reuse
+- *    any vc but zero (some servers reset the connection on vcnum zero)
+- *
+- */
+-static __le16 get_next_vcnum(struct cifsSesInfo *ses)
+-{
+-      __u16 vcnum = 0;
+-      struct list_head *tmp;
+-      struct cifsSesInfo *tmp_ses;
+-      __u16 max_vcs = ses->server->max_vcs;
+-      __u16 i;
+-      int free_vc_found = 0;
+-
+-      /* Quoting the MS-SMB specification: "Windows-based SMB servers set this
+-      field to one but do not enforce this limit, which allows an SMB client
+-      to establish more virtual circuits than allowed by this value ... but
+-      other server implementations can enforce this limit." */
+-      if (max_vcs < 2)
+-              max_vcs = 0xFFFF;
+-
+-      write_lock(&cifs_tcp_ses_lock);
+-      if ((ses->need_reconnect) && is_first_ses_reconnect(ses))
+-                      goto get_vc_num_exit;  /* vcnum will be zero */
+-      for (i = ses->server->srv_count - 1; i < max_vcs; i++) {
+-              if (i == 0) /* this is the only connection, use vc 0 */
+-                      break;
+-
+-              free_vc_found = 1;
+-
+-              list_for_each(tmp, &ses->server->smb_ses_list) {
+-                      tmp_ses = list_entry(tmp, struct cifsSesInfo,
+-                                           smb_ses_list);
+-                      if (tmp_ses->vcnum == i) {
+-                              free_vc_found = 0;
+-                              break; /* found duplicate, try next vcnum */
+-                      }
+-              }
+-              if (free_vc_found)
+-                      break; /* we found a vcnumber that will work - use it */
+-      }
+-
+-      if (i == 0)
+-              vcnum = 0; /* for most common case, ie if one smb session, use
+-                            vc zero.  Also for case when no free vcnum, zero
+-                            is safest to send (some clients only send zero) */
+-      else if (free_vc_found == 0)
+-              vcnum = 1;  /* we can not reuse vc=0 safely, since some servers
+-                              reset all uids on that, but 1 is ok. */
+-      else
+-              vcnum = i;
+-      ses->vcnum = vcnum;
+-get_vc_num_exit:
+-      write_unlock(&cifs_tcp_ses_lock);
+-
+-      return le16_to_cpu(vcnum);
+-}
+-
+ static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
+ {
+       __u32 capabilities = 0;
+       /* init fields common to all four types of SessSetup */
+-      /* Note that offsets for first seven fields in req struct are same  */
+-      /*      in CIFS Specs so does not matter which of 3 forms of struct */
+-      /*      that we use in next few lines                               */
+-      /* Note that header is initialized to zero in header_assemble */
++      /* note that header is initialized to zero in header_assemble */
+       pSMB->req.AndXCommand = 0xFF;
+       pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
+       pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
+-      pSMB->req.VcNumber = get_next_vcnum(ses);
+       /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */
+@@ -155,6 +71,7 @@
+       if (ses->capabilities & CAP_UNIX)
+               capabilities |= CAP_UNIX;
++      /* BB check whether to init vcnum BB */
+       return capabilities;
+ }
+@@ -311,7 +228,7 @@
+       kfree(ses->serverOS);
+       /* UTF-8 string will not grow more than four times as big as UCS-16 */
+-      ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
++      ses->serverOS = kzalloc(4 * len, GFP_KERNEL);
+       if (ses->serverOS != NULL)
+               cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
+       data += 2 * (len + 1);
+@@ -324,7 +241,7 @@
+               return rc;
+       kfree(ses->serverNOS);
+-      ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
++      ses->serverNOS = kzalloc(4 * len, GFP_KERNEL); /* BB this is wrong length FIXME BB */
+       if (ses->serverNOS != NULL) {
+               cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
+                                  nls_cp);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/cifs/transport.c linux-2.6.29-rc3.owrt/fs/cifs/transport.c
+--- linux-2.6.29.owrt/fs/cifs/transport.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/cifs/transport.c  2009-05-10 23:48:29.000000000 +0200
+@@ -154,8 +154,81 @@
+       spin_unlock(&GlobalMid_Lock);
+ }
++int
++smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer,
++       unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd)
++{
++      int rc = 0;
++      int i = 0;
++      struct msghdr smb_msg;
++      struct kvec iov;
++      unsigned len = smb_buf_length + 4;
++
++      if (ssocket == NULL)
++              return -ENOTSOCK; /* BB eventually add reconnect code here */
++      iov.iov_base = smb_buffer;
++      iov.iov_len = len;
++
++      smb_msg.msg_name = sin;
++      smb_msg.msg_namelen = sizeof(struct sockaddr);
++      smb_msg.msg_control = NULL;
++      smb_msg.msg_controllen = 0;
++      if (noblocksnd)
++              smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL;
++      else
++              smb_msg.msg_flags = MSG_NOSIGNAL;
++
++      /* smb header is converted in header_assemble. bcc and rest of SMB word
++         area, and byte area if necessary, is converted to littleendian in
++         cifssmb.c and RFC1001 len is converted to bigendian in smb_send
++         Flags2 is converted in SendReceive */
++
++      smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length);
++      cFYI(1, ("Sending smb of length %d", smb_buf_length));
++      dump_smb(smb_buffer, len);
++
++      while (len > 0) {
++              rc = kernel_sendmsg(ssocket, &smb_msg, &iov, 1, len);
++              if ((rc == -ENOSPC) || (rc == -EAGAIN)) {
++                      i++;
++              /* smaller timeout here than send2 since smaller size */
++              /* Although it may not be required, this also is smaller
++                 oplock break time */
++                      if (i > 12) {
++                              cERROR(1,
++                                 ("sends on sock %p stuck for 7 seconds",
++                                  ssocket));
++                              rc = -EAGAIN;
++                              break;
++                      }
++                      msleep(1 << i);
++                      continue;
++              }
++              if (rc < 0)
++                      break;
++              else
++                      i = 0; /* reset i after each successful send */
++              iov.iov_base += rc;
++              iov.iov_len -= rc;
++              len -= rc;
++      }
++
++      if (rc < 0) {
++              cERROR(1, ("Error %d sending data on socket to server", rc));
++      } else {
++              rc = 0;
++      }
++
++      /* Don't want to modify the buffer as a
++         side effect of this call. */
++      smb_buffer->smb_buf_length = smb_buf_length;
++
++      return rc;
++}
++
+ static int
+-smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
++smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec,
++        struct sockaddr *sin, bool noblocksnd)
+ {
+       int rc = 0;
+       int i = 0;
+@@ -170,11 +243,11 @@
+       if (ssocket == NULL)
+               return -ENOTSOCK; /* BB eventually add reconnect code here */
+-      smb_msg.msg_name = (struct sockaddr *) &server->addr.sockAddr;
++      smb_msg.msg_name = sin;
+       smb_msg.msg_namelen = sizeof(struct sockaddr);
+       smb_msg.msg_control = NULL;
+       smb_msg.msg_controllen = 0;
+-      if (server->noblocksnd)
++      if (noblocksnd)
+               smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL;
+       else
+               smb_msg.msg_flags = MSG_NOSIGNAL;
+@@ -199,25 +272,7 @@
+                                   n_vec - first_vec, total_len);
+               if ((rc == -ENOSPC) || (rc == -EAGAIN)) {
+                       i++;
+-                      /* if blocking send we try 3 times, since each can block
+-                         for 5 seconds. For nonblocking  we have to try more
+-                         but wait increasing amounts of time allowing time for
+-                         socket to clear.  The overall time we wait in either
+-                         case to send on the socket is about 15 seconds.
+-                         Similarly we wait for 15 seconds for
+-                         a response from the server in SendReceive[2]
+-                         for the server to send a response back for
+-                         most types of requests (except SMB Write
+-                         past end of file which can be slow, and
+-                         blocking lock operations). NFS waits slightly longer
+-                         than CIFS, but this can make it take longer for
+-                         nonresponsive servers to be detected and 15 seconds
+-                         is more than enough time for modern networks to
+-                         send a packet.  In most cases if we fail to send
+-                         after the retries we will kill the socket and
+-                         reconnect which may clear the network problem.
+-                      */
+-                      if ((i >= 14) || (!server->noblocksnd && (i > 2))) {
++                      if (i >= 14) {
+                               cERROR(1,
+                                  ("sends on sock %p stuck for 15 seconds",
+                                   ssocket));
+@@ -284,18 +339,6 @@
+       return rc;
+ }
+-int
+-smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer,
+-       unsigned int smb_buf_length)
+-{
+-      struct kvec iov;
+-
+-      iov.iov_base = smb_buffer;
+-      iov.iov_len = smb_buf_length + 4;
+-
+-      return smb_sendv(server, &iov, 1);
+-}
+-
+ static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op)
+ {
+       if (long_op == CIFS_ASYNC_OP) {
+@@ -497,7 +540,9 @@
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_inc(&ses->server->inSend);
+ #endif
+-      rc = smb_sendv(ses->server, iov, n_vec);
++      rc = smb_send2(ses->server, iov, n_vec,
++                    (struct sockaddr *) &(ses->server->addr.sockAddr),
++                     ses->server->noblocksnd);
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_dec(&ses->server->inSend);
+       midQ->when_sent = jiffies;
+@@ -691,7 +736,9 @@
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_inc(&ses->server->inSend);
+ #endif
+-      rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
++      rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
++                    (struct sockaddr *) &(ses->server->addr.sockAddr),
++                    ses->server->noblocksnd);
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_dec(&ses->server->inSend);
+       midQ->when_sent = jiffies;
+@@ -832,7 +879,9 @@
+               mutex_unlock(&ses->server->srv_mutex);
+               return rc;
+       }
+-      rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
++      rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
++            (struct sockaddr *) &(ses->server->addr.sockAddr),
++            ses->server->noblocksnd);
+       mutex_unlock(&ses->server->srv_mutex);
+       return rc;
+ }
+@@ -924,7 +973,9 @@
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_inc(&ses->server->inSend);
+ #endif
+-      rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
++      rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
++                    (struct sockaddr *) &(ses->server->addr.sockAddr),
++                    ses->server->noblocksnd);
+ #ifdef CONFIG_CIFS_STATS2
+       atomic_dec(&ses->server->inSend);
+       midQ->when_sent = jiffies;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/compat.c linux-2.6.29-rc3.owrt/fs/compat.c
+--- linux-2.6.29.owrt/fs/compat.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/compat.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1407,7 +1407,7 @@
+       bprm->cred = prepare_exec_creds();
+       if (!bprm->cred)
+               goto out_unlock;
+-      check_unsafe_exec(bprm, current->files);
++      check_unsafe_exec(bprm);
+       file = open_exec(filename);
+       retval = PTR_ERR(file);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/compat_ioctl.c linux-2.6.29-rc3.owrt/fs/compat_ioctl.c
+--- linux-2.6.29.owrt/fs/compat_ioctl.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/compat_ioctl.c    2009-05-10 23:48:29.000000000 +0200
+@@ -538,7 +538,6 @@
+                * cannot be fixed without breaking all existing apps.
+                */
+               case TUNSETIFF:
+-              case TUNGETIFF:
+               case SIOCGIFFLAGS:
+               case SIOCGIFMETRIC:
+               case SIOCGIFMTU:
+@@ -785,7 +784,7 @@
+       if (copy_in_user(&sgio->status, &sgio32->status,
+                        (4 * sizeof(unsigned char)) +
+-                       (2 * sizeof(unsigned short)) +
++                       (2 * sizeof(unsigned (short))) +
+                        (3 * sizeof(int))))
+               return -EFAULT;
+@@ -1913,9 +1912,6 @@
+ /* 0x00 */
+ COMPATIBLE_IOCTL(FIBMAP)
+ COMPATIBLE_IOCTL(FIGETBSZ)
+-/* 'X' - originally XFS but some now in the VFS */
+-COMPATIBLE_IOCTL(FIFREEZE)
+-COMPATIBLE_IOCTL(FITHAW)
+ /* RAID */
+ COMPATIBLE_IOCTL(RAID_VERSION)
+ COMPATIBLE_IOCTL(GET_ARRAY_INFO)
+@@ -1941,8 +1937,6 @@
+ /* Big K */
+ COMPATIBLE_IOCTL(PIO_FONT)
+ COMPATIBLE_IOCTL(GIO_FONT)
+-COMPATIBLE_IOCTL(PIO_CMAP)
+-COMPATIBLE_IOCTL(GIO_CMAP)
+ ULONG_IOCTL(KDSIGACCEPT)
+ COMPATIBLE_IOCTL(KDGETKEYCODE)
+ COMPATIBLE_IOCTL(KDSETKEYCODE)
+@@ -1988,11 +1982,6 @@
+ COMPATIBLE_IOCTL(TUNSETDEBUG)
+ COMPATIBLE_IOCTL(TUNSETPERSIST)
+ COMPATIBLE_IOCTL(TUNSETOWNER)
+-COMPATIBLE_IOCTL(TUNSETLINK)
+-COMPATIBLE_IOCTL(TUNSETGROUP)
+-COMPATIBLE_IOCTL(TUNGETFEATURES)
+-COMPATIBLE_IOCTL(TUNSETOFFLOAD)
+-COMPATIBLE_IOCTL(TUNSETTXFILTER)
+ /* Big V */
+ COMPATIBLE_IOCTL(VT_SETMODE)
+ COMPATIBLE_IOCTL(VT_GETMODE)
+@@ -2584,7 +2573,6 @@
+ HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc)
+ HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc)
+ HANDLE_IOCTL(TUNSETIFF, dev_ifsioc)
+-HANDLE_IOCTL(TUNGETIFF, dev_ifsioc)
+ HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl)
+ HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl)
+ HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/dcache.c linux-2.6.29-rc3.owrt/fs/dcache.c
+--- linux-2.6.29.owrt/fs/dcache.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/dcache.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1180,7 +1180,7 @@
+       iput(inode);
+       return res;
+ }
+-EXPORT_SYMBOL(d_obtain_alias);
++EXPORT_SYMBOL_GPL(d_obtain_alias);
+ /**
+  * d_splice_alias - splice a disconnected dentry into the tree if one exists
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/devpts/inode.c linux-2.6.29-rc3.owrt/fs/devpts/inode.c
+--- linux-2.6.29.owrt/fs/devpts/inode.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/devpts/inode.c    2009-05-10 23:48:29.000000000 +0200
+@@ -198,6 +198,9 @@
+       fsi->ptmx_dentry = dentry;
+       rc = 0;
++
++      printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
++                      inode->i_ino);
+ out:
+       mutex_unlock(&root->d_inode->i_mutex);
+       return rc;
+@@ -366,6 +369,8 @@
+       struct pts_fs_info *fsi;
+       struct pts_mount_opts *opts;
++      printk(KERN_NOTICE "devpts: newinstance mount\n");
++
+       err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
+       if (err)
+               return err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ecryptfs/crypto.c linux-2.6.29-rc3.owrt/fs/ecryptfs/crypto.c
+--- linux-2.6.29.owrt/fs/ecryptfs/crypto.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ecryptfs/crypto.c 2009-05-10 23:48:29.000000000 +0200
+@@ -946,8 +946,6 @@
+       list_for_each_entry(global_auth_tok,
+                           &mount_crypt_stat->global_auth_tok_list,
+                           mount_crypt_stat_list) {
+-              if (global_auth_tok->flags & ECRYPTFS_AUTH_TOK_FNEK)
+-                      continue;
+               rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
+               if (rc) {
+                       printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
+@@ -1324,13 +1322,14 @@
+ }
+ static int
+-ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry,
+-                                  char *virt, size_t virt_len)
++ecryptfs_write_metadata_to_contents(struct ecryptfs_crypt_stat *crypt_stat,
++                                  struct dentry *ecryptfs_dentry,
++                                  char *virt)
+ {
+       int rc;
+       rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
+-                                0, virt_len);
++                                0, crypt_stat->num_header_bytes_at_front);
+       if (rc)
+               printk(KERN_ERR "%s: Error attempting to write header "
+                      "information to lower file; rc = [%d]\n", __func__,
+@@ -1340,6 +1339,7 @@
+ static int
+ ecryptfs_write_metadata_to_xattr(struct dentry *ecryptfs_dentry,
++                               struct ecryptfs_crypt_stat *crypt_stat,
+                                char *page_virt, size_t size)
+ {
+       int rc;
+@@ -1349,17 +1349,6 @@
+       return rc;
+ }
+-static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask,
+-                                             unsigned int order)
+-{
+-      struct page *page;
+-
+-      page = alloc_pages(gfp_mask | __GFP_ZERO, order);
+-      if (page)
+-              return (unsigned long) page_address(page);
+-      return 0;
+-}
+-
+ /**
+  * ecryptfs_write_metadata
+  * @ecryptfs_dentry: The eCryptfs dentry
+@@ -1376,9 +1365,7 @@
+ {
+       struct ecryptfs_crypt_stat *crypt_stat =
+               &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+-      unsigned int order;
+       char *virt;
+-      size_t virt_len;
+       size_t size = 0;
+       int rc = 0;
+@@ -1394,35 +1381,33 @@
+               rc = -EINVAL;
+               goto out;
+       }
+-      virt_len = crypt_stat->num_header_bytes_at_front;
+-      order = get_order(virt_len);
+       /* Released in this function */
+-      virt = (char *)ecryptfs_get_zeroed_pages(GFP_KERNEL, order);
++      virt = (char *)get_zeroed_page(GFP_KERNEL);
+       if (!virt) {
+               printk(KERN_ERR "%s: Out of memory\n", __func__);
+               rc = -ENOMEM;
+               goto out;
+       }
+-      rc = ecryptfs_write_headers_virt(virt, virt_len, &size, crypt_stat,
+-                                       ecryptfs_dentry);
++      rc = ecryptfs_write_headers_virt(virt, PAGE_CACHE_SIZE, &size,
++                                       crypt_stat, ecryptfs_dentry);
+       if (unlikely(rc)) {
+               printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n",
+                      __func__, rc);
+               goto out_free;
+       }
+       if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
+-              rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt,
+-                                                    size);
++              rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry,
++                                                    crypt_stat, virt, size);
+       else
+-              rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt,
+-                                                       virt_len);
++              rc = ecryptfs_write_metadata_to_contents(crypt_stat,
++                                                       ecryptfs_dentry, virt);
+       if (rc) {
+               printk(KERN_ERR "%s: Error writing metadata out to lower file; "
+                      "rc = [%d]\n", __func__, rc);
+               goto out_free;
+       }
+ out_free:
+-      free_pages((unsigned long)virt, order);
++      free_page((unsigned long)virt);
+ out:
+       return rc;
+ }
+@@ -1731,7 +1716,7 @@
+ {
+       int rc = 0;
+-      (*copied_name) = kmalloc((name_size + 1), GFP_KERNEL);
++      (*copied_name) = kmalloc((name_size + 2), GFP_KERNEL);
+       if (!(*copied_name)) {
+               rc = -ENOMEM;
+               goto out;
+@@ -1741,7 +1726,7 @@
+                                                * in printing out the
+                                                * string in debug
+                                                * messages */
+-      (*copied_name_size) = name_size;
++      (*copied_name_size) = (name_size + 1);
+ out:
+       return rc;
+ }
+@@ -2221,19 +2206,17 @@
+                                        struct dentry *ecryptfs_dir_dentry,
+                                        const char *name, size_t name_size)
+ {
+-      struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
+-              &ecryptfs_superblock_to_private(
+-                      ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
+       char *decoded_name;
+       size_t decoded_name_size;
+       size_t packet_size;
+       int rc = 0;
+-      if ((mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+-          && !(mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
+-          && (name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
++      if ((name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
+           && (strncmp(name, ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX,
+                       ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE) == 0)) {
++              struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
++                      &ecryptfs_superblock_to_private(
++                              ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
+               const char *orig_name = name;
+               size_t orig_name_size = name_size;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ecryptfs/ecryptfs_kernel.h linux-2.6.29-rc3.owrt/fs/ecryptfs/ecryptfs_kernel.h
+--- linux-2.6.29.owrt/fs/ecryptfs/ecryptfs_kernel.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ecryptfs/ecryptfs_kernel.h        2009-05-10 23:48:29.000000000 +0200
+@@ -328,7 +328,6 @@
+  */
+ struct ecryptfs_global_auth_tok {
+ #define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
+-#define ECRYPTFS_AUTH_TOK_FNEK    0x00000002
+       u32 flags;
+       struct list_head mount_crypt_stat_list;
+       struct key *global_auth_tok_key;
+@@ -620,6 +619,7 @@
+                      u32 flags);
+ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
+                                       struct dentry *lower_dentry,
++                                      struct ecryptfs_crypt_stat *crypt_stat,
+                                       struct inode *ecryptfs_dir_inode,
+                                       struct nameidata *ecryptfs_nd);
+ int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
+@@ -696,7 +696,7 @@
+ int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig);
+ int
+ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
+-                         char *sig, u32 global_auth_tok_flags);
++                         char *sig);
+ int ecryptfs_get_global_auth_tok_for_sig(
+       struct ecryptfs_global_auth_tok **global_auth_tok,
+       struct ecryptfs_mount_crypt_stat *mount_crypt_stat, char *sig);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ecryptfs/inode.c linux-2.6.29-rc3.owrt/fs/ecryptfs/inode.c
+--- linux-2.6.29.owrt/fs/ecryptfs/inode.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ecryptfs/inode.c  2009-05-10 23:48:29.000000000 +0200
+@@ -246,6 +246,7 @@
+  */
+ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
+                                       struct dentry *lower_dentry,
++                                      struct ecryptfs_crypt_stat *crypt_stat,
+                                       struct inode *ecryptfs_dir_inode,
+                                       struct nameidata *ecryptfs_nd)
+ {
+@@ -253,7 +254,6 @@
+       struct vfsmount *lower_mnt;
+       struct inode *lower_inode;
+       struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+-      struct ecryptfs_crypt_stat *crypt_stat;
+       char *page_virt = NULL;
+       u64 file_size;
+       int rc = 0;
+@@ -314,11 +314,6 @@
+                       goto out_free_kmem;
+               }
+       }
+-      crypt_stat = &ecryptfs_inode_to_private(
+-                                      ecryptfs_dentry->d_inode)->crypt_stat;
+-      /* TODO: lock for crypt_stat comparison */
+-      if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
+-                      ecryptfs_set_default_sizes(crypt_stat);
+       rc = ecryptfs_read_and_validate_header_region(page_virt,
+                                                     ecryptfs_dentry->d_inode);
+       if (rc) {
+@@ -367,7 +362,9 @@
+ {
+       char *encrypted_and_encoded_name = NULL;
+       size_t encrypted_and_encoded_name_size;
++      struct ecryptfs_crypt_stat *crypt_stat = NULL;
+       struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
++      struct ecryptfs_inode_info *inode_info;
+       struct dentry *lower_dir_dentry, *lower_dentry;
+       int rc = 0;
+@@ -391,15 +388,26 @@
+       }
+       if (lower_dentry->d_inode)
+               goto lookup_and_interpose;
+-      mount_crypt_stat = &ecryptfs_superblock_to_private(
+-                              ecryptfs_dentry->d_sb)->mount_crypt_stat;
+-      if (!(mount_crypt_stat
+-          && (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
++      inode_info =  ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
++      if (inode_info) {
++              crypt_stat = &inode_info->crypt_stat;
++              /* TODO: lock for crypt_stat comparison */
++              if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
++                      ecryptfs_set_default_sizes(crypt_stat);
++      }
++      if (crypt_stat)
++              mount_crypt_stat = crypt_stat->mount_crypt_stat;
++      else
++              mount_crypt_stat = &ecryptfs_superblock_to_private(
++                      ecryptfs_dentry->d_sb)->mount_crypt_stat;
++      if (!(crypt_stat && (crypt_stat->flags & ECRYPTFS_ENCRYPT_FILENAMES))
++          && !(mount_crypt_stat && (mount_crypt_stat->flags
++                                   & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
+               goto lookup_and_interpose;
+       dput(lower_dentry);
+       rc = ecryptfs_encrypt_and_encode_filename(
+               &encrypted_and_encoded_name, &encrypted_and_encoded_name_size,
+-              NULL, mount_crypt_stat, ecryptfs_dentry->d_name.name,
++              crypt_stat, mount_crypt_stat, ecryptfs_dentry->d_name.name,
+               ecryptfs_dentry->d_name.len);
+       if (rc) {
+               printk(KERN_ERR "%s: Error attempting to encrypt and encode "
+@@ -418,7 +426,7 @@
+       }
+ lookup_and_interpose:
+       rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
+-                                               ecryptfs_dir_inode,
++                                               crypt_stat, ecryptfs_dir_inode,
+                                                ecryptfs_nd);
+       goto out;
+ out_d_drop:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ecryptfs/keystore.c linux-2.6.29-rc3.owrt/fs/ecryptfs/keystore.c
+--- linux-2.6.29.owrt/fs/ecryptfs/keystore.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ecryptfs/keystore.c       2009-05-10 23:48:29.000000000 +0200
+@@ -2375,7 +2375,7 @@
+ int
+ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
+-                           char *sig, u32 global_auth_tok_flags)
++                           char *sig)
+ {
+       struct ecryptfs_global_auth_tok *new_auth_tok;
+       int rc = 0;
+@@ -2389,7 +2389,6 @@
+               goto out;
+       }
+       memcpy(new_auth_tok->sig, sig, ECRYPTFS_SIG_SIZE_HEX);
+-      new_auth_tok->flags = global_auth_tok_flags;
+       new_auth_tok->sig[ECRYPTFS_SIG_SIZE_HEX] = '\0';
+       mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
+       list_add(&new_auth_tok->mount_crypt_stat_list,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ecryptfs/main.c linux-2.6.29-rc3.owrt/fs/ecryptfs/main.c
+--- linux-2.6.29.owrt/fs/ecryptfs/main.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ecryptfs/main.c   2009-05-10 23:48:29.000000000 +0200
+@@ -319,7 +319,7 @@
+               case ecryptfs_opt_ecryptfs_sig:
+                       sig_src = args[0].from;
+                       rc = ecryptfs_add_global_auth_tok(mount_crypt_stat,
+-                                                        sig_src, 0);
++                                                        sig_src);
+                       if (rc) {
+                               printk(KERN_ERR "Error attempting to register "
+                                      "global sig; rc = [%d]\n", rc);
+@@ -370,8 +370,7 @@
+                               ECRYPTFS_SIG_SIZE_HEX] = '\0';
+                       rc = ecryptfs_add_global_auth_tok(
+                               mount_crypt_stat,
+-                              mount_crypt_stat->global_default_fnek_sig,
+-                              ECRYPTFS_AUTH_TOK_FNEK);
++                              mount_crypt_stat->global_default_fnek_sig);
+                       if (rc) {
+                               printk(KERN_ERR "Error attempting to register "
+                                      "global fnek sig [%s]; rc = [%d]\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/eventpoll.c linux-2.6.29-rc3.owrt/fs/eventpoll.c
+--- linux-2.6.29.owrt/fs/eventpoll.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/eventpoll.c       2009-05-10 23:48:29.000000000 +0200
+@@ -234,6 +234,8 @@
+ /*
+  * Configuration options available inside /proc/sys/fs/epoll/
+  */
++/* Maximum number of epoll devices, per user */
++static int max_user_instances __read_mostly;
+ /* Maximum number of epoll watched descriptors, per user */
+ static int max_user_watches __read_mostly;
+@@ -259,6 +261,14 @@
+ ctl_table epoll_table[] = {
+       {
++              .procname       = "max_user_instances",
++              .data           = &max_user_instances,
++              .maxlen         = sizeof(int),
++              .mode           = 0644,
++              .proc_handler   = &proc_dointvec_minmax,
++              .extra1         = &zero,
++      },
++      {
+               .procname       = "max_user_watches",
+               .data           = &max_user_watches,
+               .maxlen         = sizeof(int),
+@@ -481,6 +491,7 @@
+       mutex_unlock(&epmutex);
+       mutex_destroy(&ep->mtx);
++      atomic_dec(&ep->user->epoll_devs);
+       free_uid(ep->user);
+       kfree(ep);
+ }
+@@ -570,6 +581,10 @@
+       struct eventpoll *ep;
+       user = get_current_user();
++      error = -EMFILE;
++      if (unlikely(atomic_read(&user->epoll_devs) >=
++                      max_user_instances))
++              goto free_uid;
+       error = -ENOMEM;
+       ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+       if (unlikely(!ep))
+@@ -1126,6 +1141,7 @@
+                             flags & O_CLOEXEC);
+       if (fd < 0)
+               ep_free(ep);
++      atomic_inc(&ep->user->epoll_devs);
+ error_return:
+       DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
+@@ -1350,10 +1366,8 @@
+       struct sysinfo si;
+       si_meminfo(&si);
+-      /*
+-       * Allows top 4% of lomem to be allocated for epoll watches (per user).
+-       */
+-      max_user_watches = (((si.totalram - si.totalhigh) / 25) << PAGE_SHIFT) /
++      max_user_instances = 128;
++      max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+               EP_ITEM_COST;
+       /* Initialize the structure used to perform safe poll wait head wake ups */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/exec.c linux-2.6.29-rc3.owrt/fs/exec.c
+--- linux-2.6.29.owrt/fs/exec.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/exec.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1049,32 +1049,16 @@
+  * - the caller must hold current->cred_exec_mutex to protect against
+  *   PTRACE_ATTACH
+  */
+-void check_unsafe_exec(struct linux_binprm *bprm, struct files_struct *files)
++void check_unsafe_exec(struct linux_binprm *bprm)
+ {
+-      struct task_struct *p = current, *t;
+-      unsigned long flags;
+-      unsigned n_fs, n_files, n_sighand;
++      struct task_struct *p = current;
+       bprm->unsafe = tracehook_unsafe_exec(p);
+-      n_fs = 1;
+-      n_files = 1;
+-      n_sighand = 1;
+-      lock_task_sighand(p, &flags);
+-      for (t = next_thread(p); t != p; t = next_thread(t)) {
+-              if (t->fs == p->fs)
+-                      n_fs++;
+-              if (t->files == files)
+-                      n_files++;
+-              n_sighand++;
+-      }
+-
+-      if (atomic_read(&p->fs->count) > n_fs ||
+-          atomic_read(&p->files->count) > n_files ||
+-          atomic_read(&p->sighand->count) > n_sighand)
++      if (atomic_read(&p->fs->count) > 1 ||
++          atomic_read(&p->files->count) > 1 ||
++          atomic_read(&p->sighand->count) > 1)
+               bprm->unsafe |= LSM_UNSAFE_SHARE;
+-
+-      unlock_task_sighand(p, &flags);
+ }
+ /* 
+@@ -1289,7 +1273,7 @@
+       bprm->cred = prepare_exec_creds();
+       if (!bprm->cred)
+               goto out_unlock;
+-      check_unsafe_exec(bprm, displaced);
++      check_unsafe_exec(bprm);
+       file = open_exec(filename);
+       retval = PTR_ERR(file);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext2/super.c linux-2.6.29-rc3.owrt/fs/ext2/super.c
+--- linux-2.6.29.owrt/fs/ext2/super.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext2/super.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1185,12 +1185,9 @@
+       es = sbi->s_es;
+       if (((sbi->s_mount_opt & EXT2_MOUNT_XIP) !=
+           (old_mount_opt & EXT2_MOUNT_XIP)) &&
+-          invalidate_inodes(sb)) {
+-              ext2_warning(sb, __func__, "refusing change of xip flag "
+-                           "with busy inodes while remounting");
+-              sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
+-              sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
+-      }
++          invalidate_inodes(sb))
++              ext2_warning(sb, __func__, "busy inodes while remounting "\
++                           "xip remain in cache (no functional problem)");
+       if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+               return 0;
+       if (*flags & MS_RDONLY) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext3/namei.c linux-2.6.29-rc3.owrt/fs/ext3/namei.c
+--- linux-2.6.29.owrt/fs/ext3/namei.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext3/namei.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1358,7 +1358,7 @@
+       struct fake_dirent *fde;
+       blocksize =  dir->i_sb->s_blocksize;
+-      dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino));
++      dxtrace(printk("Creating index\n"));
+       retval = ext3_journal_get_write_access(handle, bh);
+       if (retval) {
+               ext3_std_error(dir->i_sb, retval);
+@@ -1367,19 +1367,6 @@
+       }
+       root = (struct dx_root *) bh->b_data;
+-      /* The 0th block becomes the root, move the dirents out */
+-      fde = &root->dotdot;
+-      de = (struct ext3_dir_entry_2 *)((char *)fde +
+-                      ext3_rec_len_from_disk(fde->rec_len));
+-      if ((char *) de >= (((char *) root) + blocksize)) {
+-              ext3_error(dir->i_sb, __func__,
+-                         "invalid rec_len for '..' in inode %lu",
+-                         dir->i_ino);
+-              brelse(bh);
+-              return -EIO;
+-      }
+-      len = ((char *) root) + blocksize - (char *) de;
+-
+       bh2 = ext3_append (handle, dir, &block, &retval);
+       if (!(bh2)) {
+               brelse(bh);
+@@ -1388,6 +1375,11 @@
+       EXT3_I(dir)->i_flags |= EXT3_INDEX_FL;
+       data1 = bh2->b_data;
++      /* The 0th block becomes the root, move the dirents out */
++      fde = &root->dotdot;
++      de = (struct ext3_dir_entry_2 *)((char *)fde +
++                      ext3_rec_len_from_disk(fde->rec_len));
++      len = ((char *) root) + blocksize - (char *) de;
+       memcpy (data1, de, len);
+       de = (struct ext3_dir_entry_2 *) data1;
+       top = data1 + len;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext3/super.c linux-2.6.29-rc3.owrt/fs/ext3/super.c
+--- linux-2.6.29.owrt/fs/ext3/super.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext3/super.c      2009-05-10 23:48:29.000000000 +0200
+@@ -2428,13 +2428,12 @@
+ static int ext3_sync_fs(struct super_block *sb, int wait)
+ {
+-      tid_t target;
+-
+       sb->s_dirt = 0;
+-      if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
+-              if (wait)
+-                      log_wait_commit(EXT3_SB(sb)->s_journal, target);
+-      }
++      if (wait)
++              ext3_force_commit(sb);
++      else
++              journal_start_commit(EXT3_SB(sb)->s_journal, NULL);
++
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/balloc.c linux-2.6.29-rc3.owrt/fs/ext4/balloc.c
+--- linux-2.6.29.owrt/fs/ext4/balloc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/balloc.c     2009-05-10 23:48:29.000000000 +0200
+@@ -609,9 +609,7 @@
+  */
+ int ext4_should_retry_alloc(struct super_block *sb, int *retries)
+ {
+-      if (!ext4_has_free_blocks(EXT4_SB(sb), 1) ||
+-          (*retries)++ > 3 ||
+-          !EXT4_SB(sb)->s_journal)
++      if (!ext4_has_free_blocks(EXT4_SB(sb), 1) || (*retries)++ > 3)
+               return 0;
+       jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
+@@ -686,15 +684,15 @@
+               gdp = ext4_get_group_desc(sb, i, NULL);
+               if (!gdp)
+                       continue;
+-              desc_count += ext4_free_blks_count(sb, gdp);
++              desc_count += le16_to_cpu(gdp->bg_free_blocks_count);
+               brelse(bitmap_bh);
+               bitmap_bh = ext4_read_block_bitmap(sb, i);
+               if (bitmap_bh == NULL)
+                       continue;
+               x = ext4_count_free(bitmap_bh, sb->s_blocksize);
+-              printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
+-                      i, ext4_free_blks_count(sb, gdp), x);
++              printk(KERN_DEBUG "group %lu: stored = %d, counted = %u\n",
++                      i, le16_to_cpu(gdp->bg_free_blocks_count), x);
+               bitmap_count += x;
+       }
+       brelse(bitmap_bh);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/ext4.h linux-2.6.29-rc3.owrt/fs/ext4/ext4.h
+--- linux-2.6.29.owrt/fs/ext4/ext4.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/ext4.h       2009-05-10 23:48:29.000000000 +0200
+@@ -868,7 +868,7 @@
+ {
+       unsigned len = le16_to_cpu(dlen);
+-      if (len == EXT4_MAX_REC_LEN || len == 0)
++      if (len == EXT4_MAX_REC_LEN)
+               return 1 << 16;
+       return len;
+ }
+@@ -1206,11 +1206,8 @@
+ static inline loff_t ext4_isize(struct ext4_inode *raw_inode)
+ {
+-      if (S_ISREG(le16_to_cpu(raw_inode->i_mode)))
+-              return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) |
+-                      le32_to_cpu(raw_inode->i_size_lo);
+-      else
+-              return (loff_t) le32_to_cpu(raw_inode->i_size_lo);
++      return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) |
++              le32_to_cpu(raw_inode->i_size_lo);
+ }
+ static inline void ext4_isize_set(struct ext4_inode *raw_inode, loff_t i_size)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/extents.c linux-2.6.29-rc3.owrt/fs/ext4/extents.c
+--- linux-2.6.29.owrt/fs/ext4/extents.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/extents.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1122,8 +1122,7 @@
+       struct ext4_extent_idx *ix;
+       struct ext4_extent *ex;
+       ext4_fsblk_t block;
+-      int depth;      /* Note, NOT eh_depth; depth from top of tree */
+-      int ee_len;
++      int depth, ee_len;
+       BUG_ON(path == NULL);
+       depth = path->p_depth;
+@@ -1180,8 +1179,7 @@
+               if (bh == NULL)
+                       return -EIO;
+               eh = ext_block_hdr(bh);
+-              /* subtract from p_depth to get proper eh_depth */
+-              if (ext4_ext_check_header(inode, eh, path->p_depth - depth)) {
++              if (ext4_ext_check_header(inode, eh, depth)) {
+                       put_bh(bh);
+                       return -EIO;
+               }
+@@ -3050,7 +3048,7 @@
+                       WARN_ON(ret <= 0);
+                       printk(KERN_ERR "%s: ext4_ext_get_blocks "
+                                   "returned error inode#%lu, block=%u, "
+-                                  "max_blocks=%u", __func__,
++                                  "max_blocks=%lu", __func__,
+                                   inode->i_ino, block, max_blocks);
+ #endif
+                       ext4_mark_inode_dirty(handle, inode);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/ialloc.c linux-2.6.29-rc3.owrt/fs/ext4/ialloc.c
+--- linux-2.6.29.owrt/fs/ext4/ialloc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/ialloc.c     2009-05-10 23:48:29.000000000 +0200
+@@ -188,7 +188,7 @@
+       struct ext4_group_desc *gdp;
+       struct ext4_super_block *es;
+       struct ext4_sb_info *sbi;
+-      int fatal = 0, err, count, cleared;
++      int fatal = 0, err, count;
+       ext4_group_t flex_group;
+       if (atomic_read(&inode->i_count) > 1) {
+@@ -248,10 +248,8 @@
+               goto error_return;
+       /* Ok, now we can actually update the inode bitmaps.. */
+-      spin_lock(sb_bgl_lock(sbi, block_group));
+-      cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+-      spin_unlock(sb_bgl_lock(sbi, block_group));
+-      if (!cleared)
++      if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
++                                      bit, bitmap_bh->b_data))
+               ext4_error(sb, "ext4_free_inode",
+                          "bit already cleared for inode %lu", ino);
+       else {
+@@ -698,7 +696,6 @@
+       struct inode *ret;
+       ext4_group_t i;
+       int free = 0;
+-      static int once = 1;
+       ext4_group_t flex_group;
+       /* Cannot create files in a deleted directory */
+@@ -718,14 +715,6 @@
+       if (sbi->s_log_groups_per_flex) {
+               ret2 = find_group_flex(sb, dir, &group);
+-              if (ret2 == -1) {
+-                      ret2 = find_group_other(sb, dir, &group);
+-                      if (ret2 == 0 && once)
+-                              once = 0;
+-                              printk(KERN_NOTICE "ext4: find_group_flex "
+-                                     "failed, fallback succeeded dir %lu\n",
+-                                     dir->i_ino);
+-              }
+               goto got_group;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/inode.c linux-2.6.29-rc3.owrt/fs/ext4/inode.c
+--- linux-2.6.29.owrt/fs/ext4/inode.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/inode.c      2009-05-10 23:48:29.000000000 +0200
+@@ -47,10 +47,8 @@
+ static inline int ext4_begin_ordered_truncate(struct inode *inode,
+                                             loff_t new_size)
+ {
+-      return jbd2_journal_begin_ordered_truncate(
+-                                      EXT4_SB(inode->i_sb)->s_journal,
+-                                      &EXT4_I(inode)->jinode,
+-                                      new_size);
++      return jbd2_journal_begin_ordered_truncate(&EXT4_I(inode)->jinode,
++                                                 new_size);
+ }
+ static void ext4_invalidatepage(struct page *page, unsigned long offset);
+@@ -362,9 +360,9 @@
+               final = ptrs;
+       } else {
+               ext4_warning(inode->i_sb, "ext4_block_to_path",
+-                              "block %lu > max in inode %lu",
++                              "block %lu > max",
+                               i_block + direct_blocks +
+-                              indirect_blocks + double_blocks, inode->i_ino);
++                              indirect_blocks + double_blocks);
+       }
+       if (boundary)
+               *boundary = final - 1 - (i_block & (ptrs - 1));
+@@ -1368,10 +1366,6 @@
+               goto out;
+       }
+-      /* We cannot recurse into the filesystem as the transaction is already
+-       * started */
+-      flags |= AOP_FLAG_NOFS;
+-
+       page = grab_cache_page_write_begin(mapping, index, flags);
+       if (!page) {
+               ext4_journal_stop(handle);
+@@ -1381,7 +1375,7 @@
+       *pagep = page;
+       ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+-                              ext4_get_block);
++                                                      ext4_get_block);
+       if (!ret && ext4_should_journal_data(inode)) {
+               ret = walk_page_buffers(handle, page_buffers(page),
+@@ -2443,7 +2437,6 @@
+       int no_nrwrite_index_update;
+       int pages_written = 0;
+       long pages_skipped;
+-      int range_cyclic, cycled = 1, io_done = 0;
+       int needed_blocks, ret = 0, nr_to_writebump = 0;
+       struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
+@@ -2495,15 +2488,9 @@
+       if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
+               range_whole = 1;
+-      range_cyclic = wbc->range_cyclic;
+-      if (wbc->range_cyclic) {
++      if (wbc->range_cyclic)
+               index = mapping->writeback_index;
+-              if (index)
+-                      cycled = 0;
+-              wbc->range_start = index << PAGE_CACHE_SHIFT;
+-              wbc->range_end  = LLONG_MAX;
+-              wbc->range_cyclic = 0;
+-      } else
++      else
+               index = wbc->range_start >> PAGE_CACHE_SHIFT;
+       mpd.wbc = wbc;
+@@ -2517,7 +2504,6 @@
+       wbc->no_nrwrite_index_update = 1;
+       pages_skipped = wbc->pages_skipped;
+-retry:
+       while (!ret && wbc->nr_to_write > 0) {
+               /*
+@@ -2544,7 +2530,7 @@
+               ext4_journal_stop(handle);
+-              if ((mpd.retval == -ENOSPC) && sbi->s_journal) {
++              if (mpd.retval == -ENOSPC) {
+                       /* commit the transaction which would
+                        * free blocks released in the transaction
+                        * and try again
+@@ -2560,7 +2546,6 @@
+                       pages_written += mpd.pages_written;
+                       wbc->pages_skipped = pages_skipped;
+                       ret = 0;
+-                      io_done = 1;
+               } else if (wbc->nr_to_write)
+                       /*
+                        * There is no more writeout needed
+@@ -2569,13 +2554,6 @@
+                        */
+                       break;
+       }
+-      if (!io_done && !cycled) {
+-              cycled = 1;
+-              index = 0;
+-              wbc->range_start = index << PAGE_CACHE_SHIFT;
+-              wbc->range_end  = mapping->writeback_index - 1;
+-              goto retry;
+-      }
+       if (pages_skipped != wbc->pages_skipped)
+               printk(KERN_EMERG "This should not happen leaving %s "
+                               "with nr_to_write = %ld ret = %d\n",
+@@ -2583,7 +2561,6 @@
+       /* Update index */
+       index += pages_written;
+-      wbc->range_cyclic = range_cyclic;
+       if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+               /*
+                * set the writeback_index so that range_cyclic
+@@ -2671,9 +2648,6 @@
+               ret = PTR_ERR(handle);
+               goto out;
+       }
+-      /* We cannot recurse into the filesystem as the transaction is already
+-       * started */
+-      flags |= AOP_FLAG_NOFS;
+       page = grab_cache_page_write_begin(mapping, index, flags);
+       if (!page) {
+@@ -2847,6 +2821,9 @@
+               filemap_write_and_wait(mapping);
+       }
++      BUG_ON(!EXT4_JOURNAL(inode) &&
++             EXT4_I(inode)->i_state & EXT4_STATE_JDATA);
++
+       if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) {
+               /*
+                * This is a REALLY heavyweight approach, but the use of
+@@ -3645,7 +3622,7 @@
+                * block pointed to itself, it would have been detached when
+                * the block was cleared. Check for this instead of OOPSing.
+                */
+-              if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh))
++              if (bh2jh(this_bh))
+                       ext4_handle_dirty_metadata(handle, inode, this_bh);
+               else
+                       ext4_error(inode->i_sb, __func__,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/mballoc.c linux-2.6.29-rc3.owrt/fs/ext4/mballoc.c
+--- linux-2.6.29.owrt/fs/ext4/mballoc.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/mballoc.c    2009-05-10 23:48:29.000000000 +0200
+@@ -1447,7 +1447,7 @@
+       struct ext4_free_extent *gex = &ac->ac_g_ex;
+       BUG_ON(ex->fe_len <= 0);
+-      BUG_ON(ex->fe_len > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
++      BUG_ON(ex->fe_len >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+       BUG_ON(ex->fe_start >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+       BUG_ON(ac->ac_status != AC_STATUS_CONTINUE);
+@@ -3025,7 +3025,7 @@
+               goto out_err;
+       ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group,
+-                      ext4_free_blks_count(sb, gdp));
++                      gdp->bg_free_blocks_count);
+       err = ext4_journal_get_write_access(handle, gdp_bh);
+       if (err)
+@@ -3292,7 +3292,7 @@
+       }
+       BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
+                       start > ac->ac_o_ex.fe_logical);
+-      BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
++      BUG_ON(size <= 0 || size >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+       /* now prepare goal request */
+@@ -3589,7 +3589,6 @@
+                       struct super_block *sb, struct ext4_prealloc_space *pa)
+ {
+       ext4_group_t grp;
+-      ext4_fsblk_t grp_blk;
+       if (!atomic_dec_and_test(&pa->pa_count) || pa->pa_free != 0)
+               return;
+@@ -3604,12 +3603,8 @@
+       pa->pa_deleted = 1;
+       spin_unlock(&pa->pa_lock);
+-      grp_blk = pa->pa_pstart;
+-      /* If linear, pa_pstart may be in the next group when pa is used up */
+-      if (pa->pa_linear)
+-              grp_blk--;
+-
+-      ext4_get_group_no_and_offset(sb, grp_blk, &grp, NULL);
++      /* -1 is to protect from crossing allocation group */
++      ext4_get_group_no_and_offset(sb, pa->pa_pstart - 1, &grp, NULL);
+       /*
+        * possible race:
+@@ -3698,8 +3693,6 @@
+       pa->pa_free = pa->pa_len;
+       atomic_set(&pa->pa_count, 1);
+       spin_lock_init(&pa->pa_lock);
+-      INIT_LIST_HEAD(&pa->pa_inode_list);
+-      INIT_LIST_HEAD(&pa->pa_group_list);
+       pa->pa_deleted = 0;
+       pa->pa_linear = 0;
+@@ -3762,7 +3755,6 @@
+       atomic_set(&pa->pa_count, 1);
+       spin_lock_init(&pa->pa_lock);
+       INIT_LIST_HEAD(&pa->pa_inode_list);
+-      INIT_LIST_HEAD(&pa->pa_group_list);
+       pa->pa_deleted = 0;
+       pa->pa_linear = 1;
+@@ -4484,26 +4476,23 @@
+                       pa->pa_free -= ac->ac_b_ex.fe_len;
+                       pa->pa_len -= ac->ac_b_ex.fe_len;
+                       spin_unlock(&pa->pa_lock);
++                      /*
++                       * We want to add the pa to the right bucket.
++                       * Remove it from the list and while adding
++                       * make sure the list to which we are adding
++                       * doesn't grow big.
++                       */
++                      if (likely(pa->pa_free)) {
++                              spin_lock(pa->pa_obj_lock);
++                              list_del_rcu(&pa->pa_inode_list);
++                              spin_unlock(pa->pa_obj_lock);
++                              ext4_mb_add_n_trim(ac);
++                      }
+               }
++              ext4_mb_put_pa(ac, ac->ac_sb, pa);
+       }
+       if (ac->alloc_semp)
+               up_read(ac->alloc_semp);
+-      if (pa) {
+-              /*
+-               * We want to add the pa to the right bucket.
+-               * Remove it from the list and while adding
+-               * make sure the list to which we are adding
+-               * doesn't grow big.  We need to release
+-               * alloc_semp before calling ext4_mb_add_n_trim()
+-               */
+-              if (pa->pa_linear && likely(pa->pa_free)) {
+-                      spin_lock(pa->pa_obj_lock);
+-                      list_del_rcu(&pa->pa_inode_list);
+-                      spin_unlock(pa->pa_obj_lock);
+-                      ext4_mb_add_n_trim(ac);
+-              }
+-              ext4_mb_put_pa(ac, ac->ac_sb, pa);
+-      }
+       if (ac->ac_bitmap_page)
+               page_cache_release(ac->ac_bitmap_page);
+       if (ac->ac_buddy_page)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/migrate.c linux-2.6.29-rc3.owrt/fs/ext4/migrate.c
+--- linux-2.6.29.owrt/fs/ext4/migrate.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/migrate.c    2009-05-10 23:48:29.000000000 +0200
+@@ -481,7 +481,7 @@
+                                       + 1);
+       if (IS_ERR(handle)) {
+               retval = PTR_ERR(handle);
+-              return retval;
++              goto err_out;
+       }
+       tmp_inode = ext4_new_inode(handle,
+                               inode->i_sb->s_root->d_inode,
+@@ -489,7 +489,8 @@
+       if (IS_ERR(tmp_inode)) {
+               retval = -ENOMEM;
+               ext4_journal_stop(handle);
+-              return retval;
++              tmp_inode = NULL;
++              goto err_out;
+       }
+       i_size_write(tmp_inode, i_size_read(inode));
+       /*
+@@ -617,7 +618,8 @@
+       ext4_journal_stop(handle);
+-      iput(tmp_inode);
++      if (tmp_inode)
++              iput(tmp_inode);
+       return retval;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/namei.c linux-2.6.29-rc3.owrt/fs/ext4/namei.c
+--- linux-2.6.29.owrt/fs/ext4/namei.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/namei.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1368,7 +1368,7 @@
+       struct fake_dirent *fde;
+       blocksize =  dir->i_sb->s_blocksize;
+-      dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino));
++      dxtrace(printk(KERN_DEBUG "Creating index\n"));
+       retval = ext4_journal_get_write_access(handle, bh);
+       if (retval) {
+               ext4_std_error(dir->i_sb, retval);
+@@ -1377,20 +1377,6 @@
+       }
+       root = (struct dx_root *) bh->b_data;
+-      /* The 0th block becomes the root, move the dirents out */
+-      fde = &root->dotdot;
+-      de = (struct ext4_dir_entry_2 *)((char *)fde +
+-              ext4_rec_len_from_disk(fde->rec_len));
+-      if ((char *) de >= (((char *) root) + blocksize)) {
+-              ext4_error(dir->i_sb, __func__,
+-                         "invalid rec_len for '..' in inode %lu",
+-                         dir->i_ino);
+-              brelse(bh);
+-              return -EIO;
+-      }
+-      len = ((char *) root) + blocksize - (char *) de;
+-
+-      /* Allocate new block for the 0th block's dirents */
+       bh2 = ext4_append(handle, dir, &block, &retval);
+       if (!(bh2)) {
+               brelse(bh);
+@@ -1399,6 +1385,11 @@
+       EXT4_I(dir)->i_flags |= EXT4_INDEX_FL;
+       data1 = bh2->b_data;
++      /* The 0th block becomes the root, move the dirents out */
++      fde = &root->dotdot;
++      de = (struct ext4_dir_entry_2 *)((char *)fde +
++              ext4_rec_len_from_disk(fde->rec_len));
++      len = ((char *) root) + blocksize - (char *) de;
+       memcpy (data1, de, len);
+       de = (struct ext4_dir_entry_2 *) data1;
+       top = data1 + len;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/resize.c linux-2.6.29-rc3.owrt/fs/ext4/resize.c
+--- linux-2.6.29.owrt/fs/ext4/resize.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/resize.c     2009-05-10 23:48:29.000000000 +0200
+@@ -861,13 +861,12 @@
+       gdp = (struct ext4_group_desc *)((char *)primary->b_data +
+                                        gdb_off * EXT4_DESC_SIZE(sb));
+-      memset(gdp, 0, EXT4_DESC_SIZE(sb));
+       ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
+       ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
+       ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */
+       ext4_free_blks_set(sb, gdp, input->free_blocks_count);
+       ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb));
+-      gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED);
++      gdp->bg_flags |= cpu_to_le16(EXT4_BG_INODE_ZEROED);
+       gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp);
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ext4/super.c linux-2.6.29-rc3.owrt/fs/ext4/super.c
+--- linux-2.6.29.owrt/fs/ext4/super.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ext4/super.c      2009-05-10 23:48:29.000000000 +0200
+@@ -3046,17 +3046,14 @@
+ static int ext4_sync_fs(struct super_block *sb, int wait)
+ {
+       int ret = 0;
+-      tid_t target;
+       trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait);
+       sb->s_dirt = 0;
+       if (EXT4_SB(sb)->s_journal) {
+-              if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal,
+-                                            &target)) {
+-                      if (wait)
+-                              jbd2_log_wait_commit(EXT4_SB(sb)->s_journal,
+-                                                   target);
+-              }
++              if (wait)
++                      ret = ext4_force_commit(sb);
++              else
++                      jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, NULL);
+       } else {
+               ext4_commit_super(sb, EXT4_SB(sb)->s_es, wait);
+       }
+@@ -3091,6 +3088,7 @@
+               /* Journal blocked and flushed, clear needs_recovery flag. */
+               EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
++              ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
+               error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
+               if (error)
+                       goto out;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/fat/inode.c linux-2.6.29-rc3.owrt/fs/fat/inode.c
+--- linux-2.6.29.owrt/fs/fat/inode.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/fat/inode.c       2009-05-10 23:48:29.000000000 +0200
+@@ -202,9 +202,9 @@
+       sector_t blocknr;
+       /* fat_get_cluster() assumes the requested blocknr isn't truncated. */
+-      down_read(&mapping->host->i_alloc_sem);
++      mutex_lock(&mapping->host->i_mutex);
+       blocknr = generic_block_bmap(mapping, block, fat_get_block);
+-      up_read(&mapping->host->i_alloc_sem);
++      mutex_unlock(&mapping->host->i_mutex);
+       return blocknr;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/fs-writeback.c linux-2.6.29-rc3.owrt/fs/fs-writeback.c
+--- linux-2.6.29.owrt/fs/fs-writeback.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/fs-writeback.c    2009-05-10 23:48:29.000000000 +0200
+@@ -274,7 +274,6 @@
+       int ret;
+       BUG_ON(inode->i_state & I_SYNC);
+-      WARN_ON(inode->i_state & I_NEW);
+       /* Set I_SYNC, reset I_DIRTY */
+       dirty = inode->i_state & I_DIRTY;
+@@ -299,7 +298,6 @@
+       }
+       spin_lock(&inode_lock);
+-      WARN_ON(inode->i_state & I_NEW);
+       inode->i_state &= ~I_SYNC;
+       if (!(inode->i_state & I_FREEING)) {
+               if (!(inode->i_state & I_DIRTY) &&
+@@ -472,11 +470,6 @@
+                       break;
+               }
+-              if (inode->i_state & I_NEW) {
+-                      requeue_io(inode);
+-                      continue;
+-              }
+-
+               if (wbc->nonblocking && bdi_write_congested(bdi)) {
+                       wbc->encountered_congestion = 1;
+                       if (!sb_is_blkdev_sb(sb))
+@@ -538,7 +531,7 @@
+               list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
+                       struct address_space *mapping;
+-                      if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
++                      if (inode->i_state & (I_FREEING|I_WILL_FREE))
+                               continue;
+                       mapping = inode->i_mapping;
+                       if (mapping->nrpages == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/hugetlbfs/inode.c linux-2.6.29-rc3.owrt/fs/hugetlbfs/inode.c
+--- linux-2.6.29.owrt/fs/hugetlbfs/inode.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/hugetlbfs/inode.c 2009-05-10 23:48:29.000000000 +0200
+@@ -108,8 +108,7 @@
+       if (hugetlb_reserve_pages(inode,
+                               vma->vm_pgoff >> huge_page_order(h),
+-                              len >> huge_page_shift(h), vma,
+-                              vma->vm_flags))
++                              len >> huge_page_shift(h), vma))
+               goto out;
+       ret = 0;
+@@ -948,7 +947,7 @@
+                       can_do_mlock());
+ }
+-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
++struct file *hugetlb_file_setup(const char *name, size_t size)
+ {
+       int error = -ENOMEM;
+       struct file *file;
+@@ -982,8 +981,7 @@
+       error = -ENOMEM;
+       if (hugetlb_reserve_pages(inode, 0,
+-                      size >> huge_page_shift(hstate_inode(inode)), NULL,
+-                      acctflag))
++                      size >> huge_page_shift(hstate_inode(inode)), NULL))
+               goto out_inode;
+       d_instantiate(dentry, inode);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/inode.c linux-2.6.29-rc3.owrt/fs/inode.c
+--- linux-2.6.29.owrt/fs/inode.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/inode.c   2009-05-10 23:48:29.000000000 +0200
+@@ -359,7 +359,6 @@
+               invalidate_inode_buffers(inode);
+               if (!atomic_read(&inode->i_count)) {
+                       list_move(&inode->i_list, dispose);
+-                      WARN_ON(inode->i_state & I_NEW);
+                       inode->i_state |= I_FREEING;
+                       count++;
+                       continue;
+@@ -461,7 +460,6 @@
+                               continue;
+               }
+               list_move(&inode->i_list, &freeable);
+-              WARN_ON(inode->i_state & I_NEW);
+               inode->i_state |= I_FREEING;
+               nr_pruned++;
+       }
+@@ -658,7 +656,6 @@
+        * just created it (so there can be no old holders
+        * that haven't tested I_LOCK).
+        */
+-      WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
+       inode->i_state &= ~(I_LOCK|I_NEW);
+       wake_up_inode(inode);
+ }
+@@ -1148,7 +1145,6 @@
+       list_del_init(&inode->i_list);
+       list_del_init(&inode->i_sb_list);
+-      WARN_ON(inode->i_state & I_NEW);
+       inode->i_state |= I_FREEING;
+       inodes_stat.nr_inodes--;
+       spin_unlock(&inode_lock);
+@@ -1190,19 +1186,16 @@
+                       spin_unlock(&inode_lock);
+                       return;
+               }
+-              WARN_ON(inode->i_state & I_NEW);
+               inode->i_state |= I_WILL_FREE;
+               spin_unlock(&inode_lock);
+               write_inode_now(inode, 1);
+               spin_lock(&inode_lock);
+-              WARN_ON(inode->i_state & I_NEW);
+               inode->i_state &= ~I_WILL_FREE;
+               inodes_stat.nr_unused--;
+               hlist_del_init(&inode->i_hash);
+       }
+       list_del_init(&inode->i_list);
+       list_del_init(&inode->i_sb_list);
+-      WARN_ON(inode->i_state & I_NEW);
+       inode->i_state |= I_FREEING;
+       inodes_stat.nr_inodes--;
+       spin_unlock(&inode_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/internal.h linux-2.6.29-rc3.owrt/fs/internal.h
+--- linux-2.6.29.owrt/fs/internal.h    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/internal.h        2009-05-10 23:48:29.000000000 +0200
+@@ -43,7 +43,7 @@
+ /*
+  * exec.c
+  */
+-extern void check_unsafe_exec(struct linux_binprm *, struct files_struct *);
++extern void check_unsafe_exec(struct linux_binprm *);
+ /*
+  * namespace.c
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/jbd/journal.c linux-2.6.29-rc3.owrt/fs/jbd/journal.c
+--- linux-2.6.29.owrt/fs/jbd/journal.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/jbd/journal.c     2009-05-10 23:48:29.000000000 +0200
+@@ -427,7 +427,7 @@
+ }
+ /*
+- * Called under j_state_lock.  Returns true if a transaction commit was started.
++ * Called under j_state_lock.  Returns true if a transaction was started.
+  */
+ int __log_start_commit(journal_t *journal, tid_t target)
+ {
+@@ -495,8 +495,7 @@
+ /*
+  * Start a commit of the current running transaction (if any).  Returns true
+- * if a transaction is going to be committed (or is currently already
+- * committing), and fills its tid in at *ptid
++ * if a transaction was started, and fills its tid in at *ptid
+  */
+ int journal_start_commit(journal_t *journal, tid_t *ptid)
+ {
+@@ -506,19 +505,15 @@
+       if (journal->j_running_transaction) {
+               tid_t tid = journal->j_running_transaction->t_tid;
+-              __log_start_commit(journal, tid);
+-              /* There's a running transaction and we've just made sure
+-               * it's commit has been scheduled. */
+-              if (ptid)
++              ret = __log_start_commit(journal, tid);
++              if (ret && ptid)
+                       *ptid = tid;
+-              ret = 1;
+-      } else if (journal->j_committing_transaction) {
++      } else if (journal->j_committing_transaction && ptid) {
+               /*
+                * If ext3_write_super() recently started a commit, then we
+                * have to wait for completion of that transaction
+                */
+-              if (ptid)
+-                      *ptid = journal->j_committing_transaction->t_tid;
++              *ptid = journal->j_committing_transaction->t_tid;
+               ret = 1;
+       }
+       spin_unlock(&journal->j_state_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/jbd2/journal.c linux-2.6.29-rc3.owrt/fs/jbd2/journal.c
+--- linux-2.6.29.owrt/fs/jbd2/journal.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/jbd2/journal.c    2009-05-10 23:48:29.000000000 +0200
+@@ -37,10 +37,10 @@
+ #include <linux/proc_fs.h>
+ #include <linux/debugfs.h>
+ #include <linux/seq_file.h>
+-#include <linux/math64.h>
+ #include <asm/uaccess.h>
+ #include <asm/page.h>
++#include <asm/div64.h>
+ EXPORT_SYMBOL(jbd2_journal_start);
+ EXPORT_SYMBOL(jbd2_journal_restart);
+@@ -450,7 +450,7 @@
+ }
+ /*
+- * Called under j_state_lock.  Returns true if a transaction commit was started.
++ * Called under j_state_lock.  Returns true if a transaction was started.
+  */
+ int __jbd2_log_start_commit(journal_t *journal, tid_t target)
+ {
+@@ -518,8 +518,7 @@
+ /*
+  * Start a commit of the current running transaction (if any).  Returns true
+- * if a transaction is going to be committed (or is currently already
+- * committing), and fills its tid in at *ptid
++ * if a transaction was started, and fills its tid in at *ptid
+  */
+ int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
+ {
+@@ -529,19 +528,15 @@
+       if (journal->j_running_transaction) {
+               tid_t tid = journal->j_running_transaction->t_tid;
+-              __jbd2_log_start_commit(journal, tid);
+-              /* There's a running transaction and we've just made sure
+-               * it's commit has been scheduled. */
+-              if (ptid)
++              ret = __jbd2_log_start_commit(journal, tid);
++              if (ret && ptid)
+                       *ptid = tid;
+-              ret = 1;
+-      } else if (journal->j_committing_transaction) {
++      } else if (journal->j_committing_transaction && ptid) {
+               /*
+                * If ext3_write_super() recently started a commit, then we
+                * have to wait for completion of that transaction
+                */
+-              if (ptid)
+-                      *ptid = journal->j_committing_transaction->t_tid;
++              *ptid = journal->j_committing_transaction->t_tid;
+               ret = 1;
+       }
+       spin_unlock(&journal->j_state_lock);
+@@ -851,8 +846,8 @@
+           jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
+       seq_printf(seq, "  %ums logging transaction\n",
+           jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
+-      seq_printf(seq, "  %lluus average transaction commit time\n",
+-                 div_u64(s->journal->j_average_commit_time, 1000));
++      seq_printf(seq, "  %luus average transaction commit time\n",
++                 do_div(s->journal->j_average_commit_time, 1000));
+       seq_printf(seq, "  %lu handles per transaction\n",
+           s->stats->u.run.rs_handle_count / s->stats->ts_tid);
+       seq_printf(seq, "  %lu blocks per transaction\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/jbd2/transaction.c linux-2.6.29-rc3.owrt/fs/jbd2/transaction.c
+--- linux-2.6.29.owrt/fs/jbd2/transaction.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/jbd2/transaction.c        2009-05-10 23:48:29.000000000 +0200
+@@ -2129,46 +2129,26 @@
+ }
+ /*
+- * File truncate and transaction commit interact with each other in a
+- * non-trivial way.  If a transaction writing data block A is
+- * committing, we cannot discard the data by truncate until we have
+- * written them.  Otherwise if we crashed after the transaction with
+- * write has committed but before the transaction with truncate has
+- * committed, we could see stale data in block A.  This function is a
+- * helper to solve this problem.  It starts writeout of the truncated
+- * part in case it is in the committing transaction.
+- *
+- * Filesystem code must call this function when inode is journaled in
+- * ordered mode before truncation happens and after the inode has been
+- * placed on orphan list with the new inode size. The second condition
+- * avoids the race that someone writes new data and we start
+- * committing the transaction after this function has been called but
+- * before a transaction for truncate is started (and furthermore it
+- * allows us to optimize the case where the addition to orphan list
+- * happens in the same transaction as write --- we don't have to write
+- * any data in such case).
++ * This function must be called when inode is journaled in ordered mode
++ * before truncation happens. It starts writeout of truncated part in
++ * case it is in the committing transaction so that we stand to ordered
++ * mode consistency guarantees.
+  */
+-int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+-                                      struct jbd2_inode *jinode,
++int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode,
+                                       loff_t new_size)
+ {
+-      transaction_t *inode_trans, *commit_trans;
++      journal_t *journal;
++      transaction_t *commit_trans;
+       int ret = 0;
+-      /* This is a quick check to avoid locking if not necessary */
+-      if (!jinode->i_transaction)
++      if (!inode->i_transaction && !inode->i_next_transaction)
+               goto out;
+-      /* Locks are here just to force reading of recent values, it is
+-       * enough that the transaction was not committing before we started
+-       * a transaction adding the inode to orphan list */
++      journal = inode->i_transaction->t_journal;
+       spin_lock(&journal->j_state_lock);
+       commit_trans = journal->j_committing_transaction;
+       spin_unlock(&journal->j_state_lock);
+-      spin_lock(&journal->j_list_lock);
+-      inode_trans = jinode->i_transaction;
+-      spin_unlock(&journal->j_list_lock);
+-      if (inode_trans == commit_trans) {
+-              ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping,
++      if (inode->i_transaction == commit_trans) {
++              ret = filemap_fdatawrite_range(inode->i_vfs_inode->i_mapping,
+                       new_size, LLONG_MAX);
+               if (ret)
+                       jbd2_journal_abort(journal, ret);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/jffs2/background.c linux-2.6.29-rc3.owrt/fs/jffs2/background.c
+--- linux-2.6.29.owrt/fs/jffs2/background.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/jffs2/background.c        2009-05-10 23:48:29.000000000 +0200
+@@ -95,17 +95,13 @@
+                       spin_unlock(&c->erase_completion_lock);
+                       
+-              /* Problem - immediately after bootup, the GCD spends a lot
+-               * of time in places like jffs2_kill_fragtree(); so much so
+-               * that userspace processes (like gdm and X) are starved
+-               * despite plenty of cond_resched()s and renicing.  Yield()
+-               * doesn't help, either (presumably because userspace and GCD
+-               * are generally competing for a higher latency resource -
+-               * disk).
+-               * This forces the GCD to slow the hell down.   Pulling an
+-               * inode in with read_inode() is much preferable to having
+-               * the GC thread get there first. */
+-              schedule_timeout_interruptible(msecs_to_jiffies(50));
++              /* This thread is purely an optimisation. But if it runs when
++                 other things could be running, it actually makes things a
++                 lot worse. Use yield() and put it at the back of the runqueue
++                 every time. Especially during boot, pulling an inode in
++                 with read_inode() is much preferable to having the GC thread
++                 get there first. */
++              yield();
+               /* Put_super will send a SIGKILL and then wait on the sem.
+                */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/jffs2/readinode.c linux-2.6.29-rc3.owrt/fs/jffs2/readinode.c
+--- linux-2.6.29.owrt/fs/jffs2/readinode.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/jffs2/readinode.c 2009-05-10 23:48:29.000000000 +0200
+@@ -220,7 +220,7 @@
+                               struct jffs2_tmp_dnode_info *tn)
+ {
+       uint32_t fn_end = tn->fn->ofs + tn->fn->size;
+-      struct jffs2_tmp_dnode_info *this, *ptn;
++      struct jffs2_tmp_dnode_info *this;
+       dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
+@@ -251,18 +251,11 @@
+       if (this) {
+               /* If the node is coincident with another at a lower address,
+                  back up until the other node is found. It may be relevant */
+-              while (this->overlapped) {
+-                      ptn = tn_prev(this);
+-                      if (!ptn) {
+-                              /*
+-                               * We killed a node which set the overlapped
+-                               * flags during the scan. Fix it up.
+-                               */
+-                              this->overlapped = 0;
+-                              break;
+-                      }
+-                      this = ptn;
+-              }
++              while (this->overlapped)
++                      this = tn_prev(this);
++
++              /* First node should never be marked overlapped */
++              BUG_ON(!this);
+               dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole");
+       }
+@@ -367,17 +360,7 @@
+                       }
+                       if (!this->overlapped)
+                               break;
+-
+-                      ptn = tn_prev(this);
+-                      if (!ptn) {
+-                              /*
+-                               * We killed a node which set the overlapped
+-                               * flags during the scan. Fix it up.
+-                               */
+-                              this->overlapped = 0;
+-                              break;
+-                      }
+-                      this = ptn;
++                      this = tn_prev(this);
+               }
+       }
+@@ -473,15 +456,8 @@
+               eat_last(&rii->tn_root, &last->rb);
+               ver_insert(&ver_root, last);
+-              if (unlikely(last->overlapped)) {
+-                      if (pen)
+-                              continue;
+-                      /*
+-                       * We killed a node which set the overlapped
+-                       * flags during the scan. Fix it up.
+-                       */
+-                      last->overlapped = 0;
+-              }
++              if (unlikely(last->overlapped))
++                      continue;
+               /* Now we have a bunch of nodes in reverse version
+                  order, in the tree at ver_root. Most of the time,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/lockd/clntlock.c linux-2.6.29-rc3.owrt/fs/lockd/clntlock.c
+--- linux-2.6.29.owrt/fs/lockd/clntlock.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/lockd/clntlock.c  2009-05-10 23:48:29.000000000 +0200
+@@ -139,55 +139,6 @@
+       return 0;
+ }
+-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+-static const struct in6_addr *nlmclnt_map_v4addr(const struct sockaddr *sap,
+-                                               struct in6_addr *addr_mapped)
+-{
+-      const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
+-
+-      switch (sap->sa_family) {
+-      case AF_INET6:
+-              return &((const struct sockaddr_in6 *)sap)->sin6_addr;
+-      case AF_INET:
+-              ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, addr_mapped);
+-              return addr_mapped;
+-      }
+-
+-      return NULL;
+-}
+-
+-/*
+- * If lockd is using a PF_INET6 listener, all incoming requests appear
+- * to come from AF_INET6 remotes.  The address of AF_INET remotes are
+- * mapped to AF_INET6 automatically by the network layer.  In case the
+- * user passed an AF_INET server address at mount time, ensure both
+- * addresses are AF_INET6 before comparing them.
+- */
+-static int nlmclnt_cmp_addr(const struct nlm_host *host,
+-                          const struct sockaddr *sap)
+-{
+-      const struct in6_addr *addr1;
+-      const struct in6_addr *addr2;
+-      struct in6_addr addr1_mapped;
+-      struct in6_addr addr2_mapped;
+-
+-      addr1 = nlmclnt_map_v4addr(nlm_addr(host), &addr1_mapped);
+-      if (likely(addr1 != NULL)) {
+-              addr2 = nlmclnt_map_v4addr(sap, &addr2_mapped);
+-              if (likely(addr2 != NULL))
+-                      return ipv6_addr_equal(addr1, addr2);
+-      }
+-
+-      return 0;
+-}
+-#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+-static int nlmclnt_cmp_addr(const struct nlm_host *host,
+-                          const struct sockaddr *sap)
+-{
+-      return nlm_cmp_addr(nlm_addr(host), sap);
+-}
+-#endif        /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+-
+ /*
+  * The server lockd has called us back to tell us the lock was granted
+  */
+@@ -215,7 +166,7 @@
+                */
+               if (fl_blocked->fl_u.nfs_fl.owner->pid != lock->svid)
+                       continue;
+-              if (!nlmclnt_cmp_addr(block->b_host, addr))
++              if (!nlm_cmp_addr(nlm_addr(block->b_host), addr))
+                       continue;
+               if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0)
+                       continue;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/lockd/svclock.c linux-2.6.29-rc3.owrt/fs/lockd/svclock.c
+--- linux-2.6.29.owrt/fs/lockd/svclock.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/lockd/svclock.c   2009-05-10 23:48:29.000000000 +0200
+@@ -427,7 +427,7 @@
+                       goto out;
+               case -EAGAIN:
+                       ret = nlm_lck_denied;
+-                      break;
++                      goto out;
+               case FILE_LOCK_DEFERRED:
+                       if (wait)
+                               break;
+@@ -443,10 +443,6 @@
+                       goto out;
+       }
+-      ret = nlm_lck_denied;
+-      if (!wait)
+-              goto out;
+-
+       ret = nlm_lck_blocked;
+       /* Append to list of blocked */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/Makefile linux-2.6.29-rc3.owrt/fs/Makefile
+--- linux-2.6.29.owrt/fs/Makefile      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/Makefile  2009-05-10 23:48:29.000000000 +0200
+@@ -69,12 +69,10 @@
+ # Do not add any filesystems before this line
+ obj-$(CONFIG_REISERFS_FS)     += reiserfs/
+ obj-$(CONFIG_EXT3_FS)         += ext3/ # Before ext2 so root fs can be ext3
+-obj-$(CONFIG_EXT2_FS)         += ext2/
+-# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+-# unless explicitly requested by rootfstype
+-obj-$(CONFIG_EXT4_FS)         += ext4/
++obj-$(CONFIG_EXT4_FS)         += ext4/ # Before ext2 so root fs can be ext4
+ obj-$(CONFIG_JBD)             += jbd/
+ obj-$(CONFIG_JBD2)            += jbd2/
++obj-$(CONFIG_EXT2_FS)         += ext2/
+ obj-$(CONFIG_CRAMFS)          += cramfs/
+ obj-$(CONFIG_SQUASHFS)                += squashfs/
+ obj-y                         += ramfs/
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/minix/inode.c linux-2.6.29-rc3.owrt/fs/minix/inode.c
+--- linux-2.6.29.owrt/fs/minix/inode.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/minix/inode.c     2009-05-10 23:48:29.000000000 +0200
+@@ -3,7 +3,7 @@
+  *
+  *  Copyright (C) 1991, 1992  Linus Torvalds
+  *
+- *  Copyright (C) 1996  Gertjan van Wingerde
++ *  Copyright (C) 1996  Gertjan van Wingerde    (gertjan@cs.vu.nl)
+  *    Minix V2 fs support.
+  *
+  *  Modified for 680x0 by Andreas Schwab
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/namespace.c linux-2.6.29-rc3.owrt/fs/namespace.c
+--- linux-2.6.29.owrt/fs/namespace.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/namespace.c       2009-05-10 23:48:29.000000000 +0200
+@@ -614,11 +614,9 @@
+        */
+       for_each_possible_cpu(cpu) {
+               struct mnt_writer *cpu_writer = &per_cpu(mnt_writers, cpu);
+-              spin_lock(&cpu_writer->lock);
+-              if (cpu_writer->mnt != mnt) {
+-                      spin_unlock(&cpu_writer->lock);
++              if (cpu_writer->mnt != mnt)
+                       continue;
+-              }
++              spin_lock(&cpu_writer->lock);
+               atomic_add(cpu_writer->count, &mnt->__mnt_writers);
+               cpu_writer->count = 0;
+               /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfs/client.c linux-2.6.29-rc3.owrt/fs/nfs/client.c
+--- linux-2.6.29.owrt/fs/nfs/client.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfs/client.c      2009-05-10 23:48:29.000000000 +0200
+@@ -255,32 +255,6 @@
+       }
+       return 0;
+ }
+-
+-/*
+- * Test if two ip6 socket addresses refer to the same socket by
+- * comparing relevant fields. The padding bytes specifically, are not
+- * compared. sin6_flowinfo is not compared because it only affects QoS
+- * and sin6_scope_id is only compared if the address is "link local"
+- * because "link local" addresses need only be unique to a specific
+- * link. Conversely, ordinary unicast addresses might have different
+- * sin6_scope_id.
+- *
+- * The caller should ensure both socket addresses are AF_INET6.
+- */
+-static int nfs_sockaddr_cmp_ip6(const struct sockaddr *sa1,
+-                              const struct sockaddr *sa2)
+-{
+-      const struct sockaddr_in6 *saddr1 = (const struct sockaddr_in6 *)sa1;
+-      const struct sockaddr_in6 *saddr2 = (const struct sockaddr_in6 *)sa2;
+-
+-      if (!ipv6_addr_equal(&saddr1->sin6_addr,
+-                           &saddr1->sin6_addr))
+-              return 0;
+-      if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL &&
+-          saddr1->sin6_scope_id != saddr2->sin6_scope_id)
+-              return 0;
+-      return saddr1->sin6_port == saddr2->sin6_port;
+-}
+ #else
+ static int nfs_sockaddr_match_ipaddr4(const struct sockaddr_in *sa1,
+                                const struct sockaddr_in *sa2)
+@@ -296,52 +270,9 @@
+       return nfs_sockaddr_match_ipaddr4((const struct sockaddr_in *)sa1,
+                       (const struct sockaddr_in *)sa2);
+ }
+-
+-static int nfs_sockaddr_cmp_ip6(const struct sockaddr * sa1,
+-                              const struct sockaddr * sa2)
+-{
+-      return 0;
+-}
+ #endif
+ /*
+- * Test if two ip4 socket addresses refer to the same socket, by
+- * comparing relevant fields. The padding bytes specifically, are
+- * not compared.
+- *
+- * The caller should ensure both socket addresses are AF_INET.
+- */
+-static int nfs_sockaddr_cmp_ip4(const struct sockaddr *sa1,
+-                              const struct sockaddr *sa2)
+-{
+-      const struct sockaddr_in *saddr1 = (const struct sockaddr_in *)sa1;
+-      const struct sockaddr_in *saddr2 = (const struct sockaddr_in *)sa2;
+-
+-      if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr)
+-              return 0;
+-      return saddr1->sin_port == saddr2->sin_port;
+-}
+-
+-/*
+- * Test if two socket addresses represent the same actual socket,
+- * by comparing (only) relevant fields.
+- */
+-static int nfs_sockaddr_cmp(const struct sockaddr *sa1,
+-                          const struct sockaddr *sa2)
+-{
+-      if (sa1->sa_family != sa2->sa_family)
+-              return 0;
+-
+-      switch (sa1->sa_family) {
+-      case AF_INET:
+-              return nfs_sockaddr_cmp_ip4(sa1, sa2);
+-      case AF_INET6:
+-              return nfs_sockaddr_cmp_ip6(sa1, sa2);
+-      }
+-      return 0;
+-}
+-
+-/*
+  * Find a client by IP address and protocol version
+  * - returns NULL if no such client
+  */
+@@ -413,10 +344,8 @@
+ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *data)
+ {
+       struct nfs_client *clp;
+-      const struct sockaddr *sap = data->addr;
+       list_for_each_entry(clp, &nfs_client_list, cl_share_link) {
+-              const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
+               /* Don't match clients that failed to initialise properly */
+               if (clp->cl_cons_state < 0)
+                       continue;
+@@ -429,7 +358,7 @@
+                       continue;
+               /* Match the full socket address */
+-              if (!nfs_sockaddr_cmp(sap, clap))
++              if (memcmp(&clp->cl_addr, data->addr, sizeof(clp->cl_addr)) != 0)
+                       continue;
+               atomic_inc(&clp->cl_count);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfs/dir.c linux-2.6.29-rc3.owrt/fs/nfs/dir.c
+--- linux-2.6.29.owrt/fs/nfs/dir.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfs/dir.c 2009-05-10 23:48:29.000000000 +0200
+@@ -1892,14 +1892,8 @@
+       cache.cred = cred;
+       cache.jiffies = jiffies;
+       status = NFS_PROTO(inode)->access(inode, &cache);
+-      if (status != 0) {
+-              if (status == -ESTALE) {
+-                      nfs_zap_caches(inode);
+-                      if (!S_ISDIR(inode->i_mode))
+-                              set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+-              }
++      if (status != 0)
+               return status;
+-      }
+       nfs_access_add_cache(inode, &cache);
+ out:
+       if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfs/nfs3acl.c linux-2.6.29-rc3.owrt/fs/nfs/nfs3acl.c
+--- linux-2.6.29.owrt/fs/nfs/nfs3acl.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfs/nfs3acl.c     2009-05-10 23:48:29.000000000 +0200
+@@ -292,7 +292,7 @@
+ {
+       struct nfs_server *server = NFS_SERVER(inode);
+       struct nfs_fattr fattr;
+-      struct page *pages[NFSACL_MAXPAGES];
++      struct page *pages[NFSACL_MAXPAGES] = { };
+       struct nfs3_setaclargs args = {
+               .inode = inode,
+               .mask = NFS_ACL,
+@@ -303,7 +303,7 @@
+               .rpc_argp       = &args,
+               .rpc_resp       = &fattr,
+       };
+-      int status;
++      int status, count;
+       status = -EOPNOTSUPP;
+       if (!nfs_server_capable(inode, NFS_CAP_ACLS))
+@@ -319,20 +319,6 @@
+       if (S_ISDIR(inode->i_mode)) {
+               args.mask |= NFS_DFACL;
+               args.acl_default = dfacl;
+-              args.len = nfsacl_size(acl, dfacl);
+-      } else
+-              args.len = nfsacl_size(acl, NULL);
+-
+-      if (args.len > NFS_ACL_INLINE_BUFSIZE) {
+-              unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT);
+-
+-              status = -ENOMEM;
+-              do {
+-                      args.pages[args.npages] = alloc_page(GFP_KERNEL);
+-                      if (args.pages[args.npages] == NULL)
+-                              goto out_freepages;
+-                      args.npages++;
+-              } while (args.npages < npages);
+       }
+       dprintk("NFS call setacl\n");
+@@ -343,6 +329,10 @@
+       nfs_zap_acl_cache(inode);
+       dprintk("NFS reply setacl: %d\n", status);
++      /* pages may have been allocated at the xdr layer. */
++      for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++)
++              __free_page(args.pages[count]);
++
+       switch (status) {
+               case 0:
+                       status = nfs_refresh_inode(inode, &fattr);
+@@ -356,11 +346,6 @@
+               case -ENOTSUPP:
+                       status = -EOPNOTSUPP;
+       }
+-out_freepages:
+-      while (args.npages != 0) {
+-              args.npages--;
+-              __free_page(args.pages[args.npages]);
+-      }
+ out:
+       return status;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfs/nfs3xdr.c linux-2.6.29-rc3.owrt/fs/nfs/nfs3xdr.c
+--- linux-2.6.29.owrt/fs/nfs/nfs3xdr.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfs/nfs3xdr.c     2009-05-10 23:48:29.000000000 +0200
+@@ -82,10 +82,8 @@
+ #define NFS3_commitres_sz     (1+NFS3_wcc_data_sz+2)
+ #define ACL3_getaclargs_sz    (NFS3_fh_sz+1)
+-#define ACL3_setaclargs_sz    (NFS3_fh_sz+1+ \
+-                              XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
+-#define ACL3_getaclres_sz     (1+NFS3_post_op_attr_sz+1+ \
+-                              XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
++#define ACL3_setaclargs_sz    (NFS3_fh_sz+1+2*(2+5*3))
++#define ACL3_getaclres_sz     (1+NFS3_post_op_attr_sz+1+2*(2+5*3))
+ #define ACL3_setaclres_sz     (1+NFS3_post_op_attr_sz)
+ /*
+@@ -705,18 +703,28 @@
+                    struct nfs3_setaclargs *args)
+ {
+       struct xdr_buf *buf = &req->rq_snd_buf;
+-      unsigned int base;
+-      int err;
++      unsigned int base, len_in_head, len = nfsacl_size(
++              (args->mask & NFS_ACL)   ? args->acl_access  : NULL,
++              (args->mask & NFS_DFACL) ? args->acl_default : NULL);
++      int count, err;
+       p = xdr_encode_fhandle(p, NFS_FH(args->inode));
+       *p++ = htonl(args->mask);
+-      req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+-      base = req->rq_slen;
+-
+-      if (args->npages != 0)
+-              xdr_encode_pages(buf, args->pages, 0, args->len);
+-      else
+-              req->rq_slen += args->len;
++      base = (char *)p - (char *)buf->head->iov_base;
++      /* put as much of the acls into head as possible. */
++      len_in_head = min_t(unsigned int, buf->head->iov_len - base, len);
++      len -= len_in_head;
++      req->rq_slen = xdr_adjust_iovec(req->rq_svec, p + (len_in_head >> 2));
++
++      for (count = 0; (count << PAGE_SHIFT) < len; count++) {
++              args->pages[count] = alloc_page(GFP_KERNEL);
++              if (!args->pages[count]) {
++                      while (count)
++                              __free_page(args->pages[--count]);
++                      return -ENOMEM;
++              }
++      }
++      xdr_encode_pages(buf, args->pages, 0, len);
+       err = nfsacl_encode(buf, base, args->inode,
+                           (args->mask & NFS_ACL) ?
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfs/nfs4namespace.c linux-2.6.29-rc3.owrt/fs/nfs/nfs4namespace.c
+--- linux-2.6.29.owrt/fs/nfs/nfs4namespace.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfs/nfs4namespace.c       2009-05-10 23:48:29.000000000 +0200
+@@ -21,9 +21,7 @@
+ #define NFSDBG_FACILITY               NFSDBG_VFS
+ /*
+- * Convert the NFSv4 pathname components into a standard posix path.
+- *
+- * Note that the resulting string will be placed at the end of the buffer
++ * Check if fs_root is valid
+  */
+ static inline char *nfs4_pathname_string(const struct nfs4_pathname *pathname,
+                                        char *buffer, ssize_t buflen)
+@@ -101,20 +99,21 @@
+ {
+       struct vfsmount *mnt = ERR_PTR(-ENOENT);
+       char *mnt_path;
+-      unsigned int maxbuflen;
++      int page2len;
+       unsigned int s;
+       mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
+       if (IS_ERR(mnt_path))
+               return mnt;
+       mountdata->mnt_path = mnt_path;
+-      maxbuflen = mnt_path - 1 - page2;
++      page2 += strlen(mnt_path) + 1;
++      page2len = PAGE_SIZE - strlen(mnt_path) - 1;
+       for (s = 0; s < location->nservers; s++) {
+               const struct nfs4_string *buf = &location->servers[s];
+               struct sockaddr_storage addr;
+-              if (buf->len <= 0 || buf->len >= maxbuflen)
++              if (buf->len <= 0 || buf->len >= PAGE_SIZE)
+                       continue;
+               mountdata->addr = (struct sockaddr *)&addr;
+@@ -127,8 +126,8 @@
+                       continue;
+               nfs_set_port(mountdata->addr, NFS_PORT);
+-              memcpy(page2, buf->data, buf->len);
+-              page2[buf->len] = '\0';
++              strncpy(page2, buf->data, page2len);
++              page2[page2len] = '\0';
+               mountdata->hostname = page2;
+               snprintf(page, PAGE_SIZE, "%s:%s",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/nfsd/nfs4xdr.c linux-2.6.29-rc3.owrt/fs/nfsd/nfs4xdr.c
+--- linux-2.6.29.owrt/fs/nfsd/nfs4xdr.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/nfsd/nfs4xdr.c    2009-05-10 23:48:29.000000000 +0200
+@@ -2596,7 +2596,6 @@
+       [OP_LOOKUPP]            = (nfsd4_enc)nfsd4_encode_noop,
+       [OP_NVERIFY]            = (nfsd4_enc)nfsd4_encode_noop,
+       [OP_OPEN]               = (nfsd4_enc)nfsd4_encode_open,
+-      [OP_OPENATTR]           = (nfsd4_enc)nfsd4_encode_noop,
+       [OP_OPEN_CONFIRM]       = (nfsd4_enc)nfsd4_encode_open_confirm,
+       [OP_OPEN_DOWNGRADE]     = (nfsd4_enc)nfsd4_encode_open_downgrade,
+       [OP_PUTFH]              = (nfsd4_enc)nfsd4_encode_noop,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/notify/inotify/inotify.c linux-2.6.29-rc3.owrt/fs/notify/inotify/inotify.c
+--- linux-2.6.29.owrt/fs/notify/inotify/inotify.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/notify/inotify/inotify.c  2009-05-10 23:48:29.000000000 +0200
+@@ -156,7 +156,7 @@
+       int ret;
+       do {
+-              if (unlikely(!idr_pre_get(&ih->idr, GFP_NOFS)))
++              if (unlikely(!idr_pre_get(&ih->idr, GFP_KERNEL)))
+                       return -ENOSPC;
+               ret = idr_get_new_above(&ih->idr, watch, ih->last_wd+1, &watch->wd);
+       } while (ret == -EAGAIN);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/alloc.c linux-2.6.29-rc3.owrt/fs/ocfs2/alloc.c
+--- linux-2.6.29.owrt/fs/ocfs2/alloc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/alloc.c     2009-05-10 23:48:29.000000000 +0200
+@@ -176,8 +176,7 @@
+       BUG_ON(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL);
+       mlog_bug_on_msg(!ocfs2_sparse_alloc(osb) &&
+-                      (OCFS2_I(inode)->ip_clusters !=
+-                       le32_to_cpu(rec->e_cpos)),
++                      (OCFS2_I(inode)->ip_clusters != rec->e_cpos),
+                       "Device %s, asking for sparse allocation: inode %llu, "
+                       "cpos %u, clusters %u\n",
+                       osb->dev_str,
+@@ -4797,29 +4796,6 @@
+       return ret;
+ }
+-static int ocfs2_replace_extent_rec(struct inode *inode,
+-                                  handle_t *handle,
+-                                  struct ocfs2_path *path,
+-                                  struct ocfs2_extent_list *el,
+-                                  int split_index,
+-                                  struct ocfs2_extent_rec *split_rec)
+-{
+-      int ret;
+-
+-      ret = ocfs2_path_bh_journal_access(handle, inode, path,
+-                                         path_num_items(path) - 1);
+-      if (ret) {
+-              mlog_errno(ret);
+-              goto out;
+-      }
+-
+-      el->l_recs[split_index] = *split_rec;
+-
+-      ocfs2_journal_dirty(handle, path_leaf_bh(path));
+-out:
+-      return ret;
+-}
+-
+ /*
+  * Mark part or all of the extent record at split_index in the leaf
+  * pointed to by path as written. This removes the unwritten
+@@ -4909,9 +4885,7 @@
+       if (ctxt.c_contig_type == CONTIG_NONE) {
+               if (ctxt.c_split_covers_rec)
+-                      ret = ocfs2_replace_extent_rec(inode, handle,
+-                                                     path, el,
+-                                                     split_index, split_rec);
++                      el->l_recs[split_index] = *split_rec;
+               else
+                       ret = ocfs2_split_and_insert(inode, handle, path, et,
+                                                    &last_eb_bh, split_index,
+@@ -5416,9 +5390,6 @@
+               goto out;
+       }
+-      vfs_dq_free_space_nodirty(inode,
+-                                ocfs2_clusters_to_bytes(inode->i_sb, len));
+-
+       ret = ocfs2_remove_extent(inode, et, cpos, len, handle, meta_ac,
+                                 dealloc);
+       if (ret) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/aops.c linux-2.6.29-rc3.owrt/fs/ocfs2/aops.c
+--- linux-2.6.29.owrt/fs/ocfs2/aops.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/aops.c      2009-05-10 23:48:29.000000000 +0200
+@@ -227,7 +227,7 @@
+       size = i_size_read(inode);
+       if (size > PAGE_CACHE_SIZE ||
+-          size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
++          size > ocfs2_max_inline_data(inode->i_sb)) {
+               ocfs2_error(inode->i_sb,
+                           "Inode %llu has with inline data has bad size: %Lu",
+                           (unsigned long long)OCFS2_I(inode)->ip_blkno,
+@@ -1555,7 +1555,6 @@
+       int ret, written = 0;
+       loff_t end = pos + len;
+       struct ocfs2_inode_info *oi = OCFS2_I(inode);
+-      struct ocfs2_dinode *di = NULL;
+       mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n",
+            (unsigned long long)oi->ip_blkno, len, (unsigned long long)pos,
+@@ -1588,9 +1587,7 @@
+       /*
+        * Check whether the write can fit.
+        */
+-      di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
+-      if (mmap_page ||
+-          end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
++      if (mmap_page || end > ocfs2_max_inline_data(inode->i_sb))
+               return 0;
+ do_inline_write:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dcache.c linux-2.6.29-rc3.owrt/fs/ocfs2/dcache.c
+--- linux-2.6.29.owrt/fs/ocfs2/dcache.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dcache.c    2009-05-10 23:48:29.000000000 +0200
+@@ -38,7 +38,6 @@
+ #include "dlmglue.h"
+ #include "file.h"
+ #include "inode.h"
+-#include "super.h"
+ static int ocfs2_dentry_revalidate(struct dentry *dentry,
+@@ -295,34 +294,6 @@
+       return ret;
+ }
+-static DEFINE_SPINLOCK(dentry_list_lock);
+-
+-/* We limit the number of dentry locks to drop in one go. We have
+- * this limit so that we don't starve other users of ocfs2_wq. */
+-#define DL_INODE_DROP_COUNT 64
+-
+-/* Drop inode references from dentry locks */
+-void ocfs2_drop_dl_inodes(struct work_struct *work)
+-{
+-      struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
+-                                             dentry_lock_work);
+-      struct ocfs2_dentry_lock *dl;
+-      int drop_count = DL_INODE_DROP_COUNT;
+-
+-      spin_lock(&dentry_list_lock);
+-      while (osb->dentry_lock_list && drop_count--) {
+-              dl = osb->dentry_lock_list;
+-              osb->dentry_lock_list = dl->dl_next;
+-              spin_unlock(&dentry_list_lock);
+-              iput(dl->dl_inode);
+-              kfree(dl);
+-              spin_lock(&dentry_list_lock);
+-      }
+-      if (osb->dentry_lock_list)
+-              queue_work(ocfs2_wq, &osb->dentry_lock_work);
+-      spin_unlock(&dentry_list_lock);
+-}
+-
+ /*
+  * ocfs2_dentry_iput() and friends.
+  *
+@@ -347,23 +318,16 @@
+ static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb,
+                                  struct ocfs2_dentry_lock *dl)
+ {
++      iput(dl->dl_inode);
+       ocfs2_simple_drop_lockres(osb, &dl->dl_lockres);
+       ocfs2_lock_res_free(&dl->dl_lockres);
+-
+-      /* We leave dropping of inode reference to ocfs2_wq as that can
+-       * possibly lead to inode deletion which gets tricky */
+-      spin_lock(&dentry_list_lock);
+-      if (!osb->dentry_lock_list)
+-              queue_work(ocfs2_wq, &osb->dentry_lock_work);
+-      dl->dl_next = osb->dentry_lock_list;
+-      osb->dentry_lock_list = dl;
+-      spin_unlock(&dentry_list_lock);
++      kfree(dl);
+ }
+ void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
+                          struct ocfs2_dentry_lock *dl)
+ {
+-      int unlock;
++      int unlock = 0;
+       BUG_ON(dl->dl_count == 0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dcache.h linux-2.6.29-rc3.owrt/fs/ocfs2/dcache.h
+--- linux-2.6.29.owrt/fs/ocfs2/dcache.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dcache.h    2009-05-10 23:48:29.000000000 +0200
+@@ -29,13 +29,8 @@
+ extern struct dentry_operations ocfs2_dentry_ops;
+ struct ocfs2_dentry_lock {
+-      /* Use count of dentry lock */
+       unsigned int            dl_count;
+-      union {
+-              /* Linked list of dentry locks to release */
+-              struct ocfs2_dentry_lock *dl_next;
+-              u64                     dl_parent_blkno;
+-      };
++      u64                     dl_parent_blkno;
+       /*
+        * The ocfs2_dentry_lock keeps an inode reference until
+@@ -52,8 +47,6 @@
+ void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
+                          struct ocfs2_dentry_lock *dl);
+-void ocfs2_drop_dl_inodes(struct work_struct *work);
+-
+ struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno,
+                                     int skip_unhashed);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dlm/dlmmaster.c linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmmaster.c
+--- linux-2.6.29.owrt/fs/ocfs2/dlm/dlmmaster.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmmaster.c     2009-05-10 23:48:29.000000000 +0200
+@@ -1849,12 +1849,12 @@
+               if (!mle) {
+                       if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN &&
+                           res->owner != assert->node_idx) {
+-                              mlog(ML_ERROR, "DIE! Mastery assert from %u, "
+-                                   "but current owner is %u! (%.*s)\n",
+-                                   assert->node_idx, res->owner, namelen,
+-                                   name);
+-                              __dlm_print_one_lock_resource(res);
+-                              BUG();
++                              mlog(ML_ERROR, "assert_master from "
++                                        "%u, but current owner is "
++                                        "%u! (%.*s)\n",
++                                     assert->node_idx, res->owner,
++                                     namelen, name);
++                              goto kill;
+                       }
+               } else if (mle->type != DLM_MLE_MIGRATION) {
+                       if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dlm/dlmthread.c linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmthread.c
+--- linux-2.6.29.owrt/fs/ocfs2/dlm/dlmthread.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmthread.c     2009-05-10 23:48:29.000000000 +0200
+@@ -181,7 +181,8 @@
+               spin_lock(&res->spinlock);
+               /* This ensures that clear refmap is sent after the set */
+-              __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
++              __dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG |
++                                                DLM_LOCK_RES_MIGRATING));
+               spin_unlock(&res->spinlock);
+               /* clear our bit from the master's refmap, ignore errors */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dlm/dlmunlock.c linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmunlock.c
+--- linux-2.6.29.owrt/fs/ocfs2/dlm/dlmunlock.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dlm/dlmunlock.c     2009-05-10 23:48:29.000000000 +0200
+@@ -117,11 +117,11 @@
+       else
+               BUG_ON(res->owner == dlm->node_num);
+-      spin_lock(&dlm->ast_lock);
++      spin_lock(&dlm->spinlock);
+       /* We want to be sure that we're not freeing a lock
+        * that still has AST's pending... */
+       in_use = !list_empty(&lock->ast_list);
+-      spin_unlock(&dlm->ast_lock);
++      spin_unlock(&dlm->spinlock);
+       if (in_use) {
+              mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
+                   "while waiting for an ast!", res->lockname.len,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/dlmglue.c linux-2.6.29-rc3.owrt/fs/ocfs2/dlmglue.c
+--- linux-2.6.29.owrt/fs/ocfs2/dlmglue.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/dlmglue.c   2009-05-10 23:48:29.000000000 +0200
+@@ -320,14 +320,9 @@
+                                       struct ocfs2_lock_res *lockres);
+ static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres,
+                                               int convert);
+-#define ocfs2_log_dlm_error(_func, _err, _lockres) do {                                       \
+-      if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY)                               \
+-              mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n",        \
+-                   _err, _func, _lockres->l_name);                                    \
+-      else                                                                            \
+-              mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n",  \
+-                   _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name,  \
+-                   (unsigned int)ocfs2_get_dentry_lock_ino(_lockres));                \
++#define ocfs2_log_dlm_error(_func, _err, _lockres) do {                       \
++      mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
++           _err, _func, _lockres->l_name);                            \
+ } while (0)
+ static int ocfs2_downconvert_thread(void *arg);
+ static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb,
+@@ -2865,10 +2860,6 @@
+       case OCFS2_UNLOCK_CANCEL_CONVERT:
+               mlog(0, "Cancel convert success for %s\n", lockres->l_name);
+               lockres->l_action = OCFS2_AST_INVALID;
+-              /* Downconvert thread may have requeued this lock, we
+-               * need to wake it. */
+-              if (lockres->l_flags & OCFS2_LOCK_BLOCKED)
+-                      ocfs2_wake_downconvert_thread(ocfs2_get_lockres_osb(lockres));
+               break;
+       case OCFS2_UNLOCK_DROP_LOCK:
+               lockres->l_level = DLM_LOCK_IV;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/journal.h linux-2.6.29-rc3.owrt/fs/ocfs2/journal.h
+--- linux-2.6.29.owrt/fs/ocfs2/journal.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/journal.h   2009-05-10 23:48:29.000000000 +0200
+@@ -513,10 +513,8 @@
+ static inline int ocfs2_begin_ordered_truncate(struct inode *inode,
+                                              loff_t new_size)
+ {
+-      return jbd2_journal_begin_ordered_truncate(
+-                              OCFS2_SB(inode->i_sb)->journal->j_journal,
+-                              &OCFS2_I(inode)->ip_jinode,
+-                              new_size);
++      return jbd2_journal_begin_ordered_truncate(&OCFS2_I(inode)->ip_jinode,
++                                                 new_size);
+ }
+ #endif /* OCFS2_JOURNAL_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/namei.c linux-2.6.29-rc3.owrt/fs/ocfs2/namei.c
+--- linux-2.6.29.owrt/fs/ocfs2/namei.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/namei.c     2009-05-10 23:48:29.000000000 +0200
+@@ -532,8 +532,7 @@
+               fe->i_dyn_features = cpu_to_le16(feat | OCFS2_INLINE_DATA_FL);
+-              fe->id2.i_data.id_count = cpu_to_le16(
+-                              ocfs2_max_inline_data_with_xattr(osb->sb, fe));
++              fe->id2.i_data.id_count = cpu_to_le16(ocfs2_max_inline_data(osb->sb));
+       } else {
+               fel = &fe->id2.i_list;
+               fel->l_tree_depth = 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/ocfs2_fs.h linux-2.6.29-rc3.owrt/fs/ocfs2/ocfs2_fs.h
+--- linux-2.6.29.owrt/fs/ocfs2/ocfs2_fs.h      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/ocfs2_fs.h  2009-05-10 23:48:29.000000000 +0200
+@@ -1070,6 +1070,12 @@
+                offsetof(struct ocfs2_dinode, id2.i_symlink);
+ }
++static inline int ocfs2_max_inline_data(struct super_block *sb)
++{
++      return sb->s_blocksize -
++              offsetof(struct ocfs2_dinode, id2.i_data.id_data);
++}
++
+ static inline int ocfs2_max_inline_data_with_xattr(struct super_block *sb,
+                                                  struct ocfs2_dinode *di)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/ocfs2.h linux-2.6.29-rc3.owrt/fs/ocfs2/ocfs2.h
+--- linux-2.6.29.owrt/fs/ocfs2/ocfs2.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/ocfs2.h     2009-05-10 23:48:29.000000000 +0200
+@@ -210,7 +210,6 @@
+ struct ocfs2_slot_info;
+ struct ocfs2_recovery_map;
+ struct ocfs2_quota_recovery;
+-struct ocfs2_dentry_lock;
+ struct ocfs2_super
+ {
+       struct task_struct *commit_task;
+@@ -326,11 +325,6 @@
+       struct list_head blocked_lock_list;
+       unsigned long blocked_lock_count;
+-      /* List of dentry locks to release. Anyone can add locks to
+-       * the list, ocfs2_wq processes the list  */
+-      struct ocfs2_dentry_lock *dentry_lock_list;
+-      struct work_struct dentry_lock_work;
+-
+       wait_queue_head_t               osb_mount_event;
+       /* Truncate log info */
+@@ -341,9 +335,6 @@
+       struct ocfs2_node_map           osb_recovering_orphan_dirs;
+       unsigned int                    *osb_orphan_wipes;
+       wait_queue_head_t               osb_wipe_event;
+-
+-      /* used to protect metaecc calculation check of xattr. */
+-      spinlock_t osb_xattr_lock;
+ };
+ #define OCFS2_SB(sb)      ((struct ocfs2_super *)(sb)->s_fs_info)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/quota_global.c linux-2.6.29-rc3.owrt/fs/ocfs2/quota_global.c
+--- linux-2.6.29.owrt/fs/ocfs2/quota_global.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/quota_global.c      2009-05-10 23:48:29.000000000 +0200
+@@ -754,9 +754,7 @@
+       if (dquot->dq_flags & mask)
+               sync = 1;
+       spin_unlock(&dq_data_lock);
+-      /* This is a slight hack but we can't afford getting global quota
+-       * lock if we already have a transaction started. */
+-      if (!sync || journal_current_handle()) {
++      if (!sync) {
+               status = ocfs2_write_dquot(dquot);
+               goto out;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/super.c linux-2.6.29-rc3.owrt/fs/ocfs2/super.c
+--- linux-2.6.29.owrt/fs/ocfs2/super.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/super.c     2009-05-10 23:48:29.000000000 +0200
+@@ -1537,13 +1537,6 @@
+       unlock_buffer(*bh);
+       ll_rw_block(READ, 1, bh);
+       wait_on_buffer(*bh);
+-      if (!buffer_uptodate(*bh)) {
+-              mlog_errno(-EIO);
+-              brelse(*bh);
+-              *bh = NULL;
+-              return -EIO;
+-      }
+-
+       return 0;
+ }
+@@ -1754,7 +1747,6 @@
+       INIT_LIST_HEAD(&osb->blocked_lock_list);
+       osb->blocked_lock_count = 0;
+       spin_lock_init(&osb->osb_lock);
+-      spin_lock_init(&osb->osb_xattr_lock);
+       ocfs2_init_inode_steal_slot(osb);
+       atomic_set(&osb->alloc_stats.moves, 0);
+@@ -1895,9 +1887,6 @@
+       INIT_WORK(&journal->j_recovery_work, ocfs2_complete_recovery);
+       journal->j_state = OCFS2_JOURNAL_FREE;
+-      INIT_WORK(&osb->dentry_lock_work, ocfs2_drop_dl_inodes);
+-      osb->dentry_lock_list = NULL;
+-
+       /* get some pseudo constants for clustersize bits */
+       osb->s_clustersize_bits =
+               le32_to_cpu(di->id2.i_super.s_clustersize_bits);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ocfs2/xattr.c linux-2.6.29-rc3.owrt/fs/ocfs2/xattr.c
+--- linux-2.6.29.owrt/fs/ocfs2/xattr.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ocfs2/xattr.c     2009-05-10 23:48:29.000000000 +0200
+@@ -82,14 +82,13 @@
+ #define OCFS2_XATTR_ROOT_SIZE (sizeof(struct ocfs2_xattr_def_value_root))
+ #define OCFS2_XATTR_INLINE_SIZE       80
+-#define OCFS2_XATTR_HEADER_GAP        4
+ #define OCFS2_XATTR_FREE_IN_IBODY     (OCFS2_MIN_XATTR_INLINE_SIZE \
+                                        - sizeof(struct ocfs2_xattr_header) \
+-                                       - OCFS2_XATTR_HEADER_GAP)
++                                       - sizeof(__u32))
+ #define OCFS2_XATTR_FREE_IN_BLOCK(ptr)        ((ptr)->i_sb->s_blocksize \
+                                        - sizeof(struct ocfs2_xattr_block) \
+                                        - sizeof(struct ocfs2_xattr_header) \
+-                                       - OCFS2_XATTR_HEADER_GAP)
++                                       - sizeof(__u32))
+ static struct ocfs2_xattr_def_value_root def_xv = {
+       .xv.xr_list.l_count = cpu_to_le16(1),
+@@ -275,12 +274,10 @@
+                              bucket->bu_blocks, bucket->bu_bhs, 0,
+                              NULL);
+       if (!rc) {
+-              spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
+               rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb,
+                                                bucket->bu_bhs,
+                                                bucket->bu_blocks,
+                                                &bucket_xh(bucket)->xh_check);
+-              spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
+               if (rc)
+                       mlog_errno(rc);
+       }
+@@ -313,11 +310,9 @@
+ {
+       int i;
+-      spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
+       ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb,
+                                  bucket->bu_bhs, bucket->bu_blocks,
+                                  &bucket_xh(bucket)->xh_check);
+-      spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
+       for (i = 0; i < bucket->bu_blocks; i++)
+               ocfs2_journal_dirty(handle, bucket->bu_bhs[i]);
+@@ -547,12 +542,8 @@
+        * when blocksize = 512, may reserve one more cluser for
+        * xattr bucket, otherwise reserve one metadata block
+        * for them is ok.
+-       * If this is a new directory with inline data,
+-       * we choose to reserve the entire inline area for
+-       * directory contents and force an external xattr block.
+        */
+       if (dir->i_sb->s_blocksize == OCFS2_MIN_BLOCKSIZE ||
+-          (S_ISDIR(mode) && ocfs2_supports_inline_data(osb)) ||
+           (s_size + a_size) > OCFS2_XATTR_FREE_IN_IBODY) {
+               ret = ocfs2_reserve_new_metadata_blocks(osb, 1, xattr_ac);
+               if (ret) {
+@@ -1516,7 +1507,7 @@
+               last += 1;
+       }
+-      free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
++      free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+       if (free < 0)
+               return -EIO;
+@@ -2199,7 +2190,7 @@
+               last += 1;
+       }
+-      free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
++      free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+       if (free < 0)
+               return 0;
+@@ -2601,9 +2592,8 @@
+       if (!ret) {
+               /* Update inode ctime. */
+-              ret = ocfs2_journal_access_di(ctxt->handle, inode,
+-                                            xis->inode_bh,
+-                                            OCFS2_JOURNAL_ACCESS_WRITE);
++              ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh,
++                                         OCFS2_JOURNAL_ACCESS_WRITE);
+               if (ret) {
+                       mlog_errno(ret);
+                       goto out;
+@@ -4739,6 +4729,13 @@
+       vb.vb_xv = (struct ocfs2_xattr_value_root *)
+               (vb.vb_bh->b_data + offset % blocksize);
++      ret = ocfs2_xattr_bucket_journal_access(ctxt->handle, bucket,
++                                              OCFS2_JOURNAL_ACCESS_WRITE);
++      if (ret) {
++              mlog_errno(ret);
++              goto out;
++      }
++
+       /*
+        * From here on out we have to dirty the bucket.  The generic
+        * value calls only modify one of the bucket's bhs, but we need
+@@ -4751,18 +4748,12 @@
+       ret = ocfs2_xattr_value_truncate(inode, &vb, len, ctxt);
+       if (ret) {
+               mlog_errno(ret);
+-              goto out;
+-      }
+-
+-      ret = ocfs2_xattr_bucket_journal_access(ctxt->handle, bucket,
+-                                              OCFS2_JOURNAL_ACCESS_WRITE);
+-      if (ret) {
+-              mlog_errno(ret);
+-              goto out;
++              goto out_dirty;
+       }
+       xe->xe_value_size = cpu_to_le64(len);
++out_dirty:
+       ocfs2_xattr_bucket_journal_dirty(ctxt->handle, bucket);
+ out:
+@@ -4795,33 +4786,19 @@
+                                               char *val,
+                                               int value_len)
+ {
+-      int ret, offset, block_off;
++      int offset;
+       struct ocfs2_xattr_value_root *xv;
+       struct ocfs2_xattr_entry *xe = xs->here;
+-      struct ocfs2_xattr_header *xh = bucket_xh(xs->bucket);
+-      void *base;
+       BUG_ON(!xs->base || !xe || ocfs2_xattr_is_local(xe));
+-      ret = ocfs2_xattr_bucket_get_name_value(inode, xh,
+-                                              xe - xh->xh_entries,
+-                                              &block_off,
+-                                              &offset);
+-      if (ret) {
+-              mlog_errno(ret);
+-              goto out;
+-      }
++      offset = le16_to_cpu(xe->xe_name_offset) +
++               OCFS2_XATTR_SIZE(xe->xe_name_len);
+-      base = bucket_block(xs->bucket, block_off);
+-      xv = (struct ocfs2_xattr_value_root *)(base + offset +
+-               OCFS2_XATTR_SIZE(xe->xe_name_len));
++      xv = (struct ocfs2_xattr_value_root *)(xs->base + offset);
+-      ret = __ocfs2_xattr_set_value_outside(inode, handle,
+-                                            xv, val, value_len);
+-      if (ret)
+-              mlog_errno(ret);
+-out:
+-      return ret;
++      return __ocfs2_xattr_set_value_outside(inode, handle,
++                                             xv, val, value_len);
+ }
+ static int ocfs2_rm_xattr_cluster(struct inode *inode,
+@@ -5084,8 +5061,8 @@
+       xh_free_start = le16_to_cpu(xh->xh_free_start);
+       header_size = sizeof(struct ocfs2_xattr_header) +
+                       count * sizeof(struct ocfs2_xattr_entry);
+-      max_free = OCFS2_XATTR_BUCKET_SIZE - header_size -
+-              le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP;
++      max_free = OCFS2_XATTR_BUCKET_SIZE -
++              le16_to_cpu(xh->xh_name_value_len) - header_size;
+       mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size "
+                       "of %u which exceed block size\n",
+@@ -5118,7 +5095,7 @@
+                       need = 0;
+       }
+-      free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP;
++      free = xh_free_start - header_size;
+       /*
+        * We need to make sure the new name/value pair
+        * can exist in the same block.
+@@ -5151,8 +5128,7 @@
+                       }
+                       xh_free_start = le16_to_cpu(xh->xh_free_start);
+-                      free = xh_free_start - header_size
+-                              - OCFS2_XATTR_HEADER_GAP;
++                      free = xh_free_start - header_size;
+                       if (xh_free_start % blocksize < need)
+                               free -= xh_free_start % blocksize;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/pipe.c linux-2.6.29-rc3.owrt/fs/pipe.c
+--- linux-2.6.29.owrt/fs/pipe.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/pipe.c    2009-05-10 23:48:29.000000000 +0200
+@@ -699,12 +699,12 @@
+       int retval;
+       mutex_lock(&inode->i_mutex);
++
+       retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
+-      if (retval >= 0) {
++
++      if (retval >= 0)
+               retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
+-              if (retval < 0) /* this can happen only if on == T */
+-                      fasync_helper(-1, filp, 0, &pipe->fasync_readers);
+-      }
++
+       mutex_unlock(&inode->i_mutex);
+       if (retval < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/proc/base.c linux-2.6.29-rc3.owrt/fs/proc/base.c
+--- linux-2.6.29.owrt/fs/proc/base.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/proc/base.c       2009-05-10 23:48:29.000000000 +0200
+@@ -3066,6 +3066,7 @@
+       int retval = -ENOENT;
+       ino_t ino;
+       int tid;
++      unsigned long pos = filp->f_pos;  /* avoiding "long long" filp->f_pos */
+       struct pid_namespace *ns;
+       task = get_proc_task(inode);
+@@ -3082,18 +3083,18 @@
+               goto out_no_task;
+       retval = 0;
+-      switch ((unsigned long)filp->f_pos) {
++      switch (pos) {
+       case 0:
+               ino = inode->i_ino;
+-              if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) < 0)
++              if (filldir(dirent, ".", 1, pos, ino, DT_DIR) < 0)
+                       goto out;
+-              filp->f_pos++;
++              pos++;
+               /* fall through */
+       case 1:
+               ino = parent_ino(dentry);
+-              if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) < 0)
++              if (filldir(dirent, "..", 2, pos, ino, DT_DIR) < 0)
+                       goto out;
+-              filp->f_pos++;
++              pos++;
+               /* fall through */
+       }
+@@ -3103,9 +3104,9 @@
+       ns = filp->f_dentry->d_sb->s_fs_info;
+       tid = (int)filp->f_version;
+       filp->f_version = 0;
+-      for (task = first_tid(leader, tid, filp->f_pos - 2, ns);
++      for (task = first_tid(leader, tid, pos - 2, ns);
+            task;
+-           task = next_tid(task), filp->f_pos++) {
++           task = next_tid(task), pos++) {
+               tid = task_pid_nr_ns(task, ns);
+               if (proc_task_fill_cache(filp, dirent, filldir, task, tid) < 0) {
+                       /* returning this tgid failed, save it as the first
+@@ -3116,6 +3117,7 @@
+               }
+       }
+ out:
++      filp->f_pos = pos;
+       put_task_struct(leader);
+ out_no_task:
+       return retval;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/proc/inode.c linux-2.6.29-rc3.owrt/fs/proc/inode.c
+--- linux-2.6.29.owrt/fs/proc/inode.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/proc/inode.c      2009-05-10 23:48:29.000000000 +0200
+@@ -485,10 +485,8 @@
+                       }
+               }
+               unlock_new_inode(inode);
+-      } else {
++      } else
+              module_put(de->owner);
+-             de_put(de);
+-      }
+       return inode;
+ out_ino:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/proc/page.c linux-2.6.29-rc3.owrt/fs/proc/page.c
+--- linux-2.6.29.owrt/fs/proc/page.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/proc/page.c       2009-05-10 23:48:29.000000000 +0200
+@@ -80,7 +80,7 @@
+ #define KPF_RECLAIM    9
+ #define KPF_BUDDY     10
+-#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
++#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+ static ssize_t kpageflags_read(struct file *file, char __user *buf,
+                            size_t count, loff_t *ppos)
+@@ -107,7 +107,7 @@
+               else
+                       kflags = ppage->flags;
+-              uflags = kpf_copy_bit(kflags, KPF_LOCKED, PG_locked) |
++              uflags = kpf_copy_bit(KPF_LOCKED, PG_locked, kflags) |
+                       kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
+                       kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
+                       kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ramfs/file-nommu.c linux-2.6.29-rc3.owrt/fs/ramfs/file-nommu.c
+--- linux-2.6.29.owrt/fs/ramfs/file-nommu.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ramfs/file-nommu.c        2009-05-10 23:48:29.000000000 +0200
+@@ -114,9 +114,6 @@
+               if (!pagevec_add(&lru_pvec, page))
+                       __pagevec_lru_add_file(&lru_pvec);
+-              /* prevent the page from being discarded on memory pressure */
+-              SetPageDirty(page);
+-
+               unlock_page(page);
+       }
+@@ -129,7 +126,6 @@
+       return -EFBIG;
+  add_error:
+-      pagevec_lru_add_file(&lru_pvec);
+       page_cache_release(pages + loop);
+       for (loop++; loop < npages; loop++)
+               __free_page(pages + loop);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/seq_file.c linux-2.6.29-rc3.owrt/fs/seq_file.c
+--- linux-2.6.29.owrt/fs/seq_file.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/seq_file.c        2009-05-10 23:48:29.000000000 +0200
+@@ -48,78 +48,12 @@
+        */
+       file->f_version = 0;
+-      /*
+-       * seq_files support lseek() and pread().  They do not implement
+-       * write() at all, but we clear FMODE_PWRITE here for historical
+-       * reasons.
+-       *
+-       * If a client of seq_files a) implements file.write() and b) wishes to
+-       * support pwrite() then that client will need to implement its own
+-       * file.open() which calls seq_open() and then sets FMODE_PWRITE.
+-       */
+-      file->f_mode &= ~FMODE_PWRITE;
++      /* SEQ files support lseek, but not pread/pwrite */
++      file->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
+       return 0;
+ }
+ EXPORT_SYMBOL(seq_open);
+-static int traverse(struct seq_file *m, loff_t offset)
+-{
+-      loff_t pos = 0, index;
+-      int error = 0;
+-      void *p;
+-
+-      m->version = 0;
+-      index = 0;
+-      m->count = m->from = 0;
+-      if (!offset) {
+-              m->index = index;
+-              return 0;
+-      }
+-      if (!m->buf) {
+-              m->buf = kmalloc(m->size = PAGE_SIZE, GFP_KERNEL);
+-              if (!m->buf)
+-                      return -ENOMEM;
+-      }
+-      p = m->op->start(m, &index);
+-      while (p) {
+-              error = PTR_ERR(p);
+-              if (IS_ERR(p))
+-                      break;
+-              error = m->op->show(m, p);
+-              if (error < 0)
+-                      break;
+-              if (unlikely(error)) {
+-                      error = 0;
+-                      m->count = 0;
+-              }
+-              if (m->count == m->size)
+-                      goto Eoverflow;
+-              if (pos + m->count > offset) {
+-                      m->from = offset - pos;
+-                      m->count -= m->from;
+-                      m->index = index;
+-                      break;
+-              }
+-              pos += m->count;
+-              m->count = 0;
+-              if (pos == offset) {
+-                      index++;
+-                      m->index = index;
+-                      break;
+-              }
+-              p = m->op->next(m, p, &index);
+-      }
+-      m->op->stop(m, p);
+-      m->index = index;
+-      return error;
+-
+-Eoverflow:
+-      m->op->stop(m, p);
+-      kfree(m->buf);
+-      m->buf = kmalloc(m->size <<= 1, GFP_KERNEL);
+-      return !m->buf ? -ENOMEM : -EAGAIN;
+-}
+-
+ /**
+  *    seq_read -      ->read() method for sequential files.
+  *    @file: the file to read from
+@@ -139,22 +73,6 @@
+       int err = 0;
+       mutex_lock(&m->lock);
+-
+-      /* Don't assume *ppos is where we left it */
+-      if (unlikely(*ppos != m->read_pos)) {
+-              m->read_pos = *ppos;
+-              while ((err = traverse(m, *ppos)) == -EAGAIN)
+-                      ;
+-              if (err) {
+-                      /* With prejudice... */
+-                      m->read_pos = 0;
+-                      m->version = 0;
+-                      m->index = 0;
+-                      m->count = 0;
+-                      goto Done;
+-              }
+-      }
+-
+       /*
+        * seq_file->op->..m_start/m_stop/m_next may do special actions
+        * or optimisations based on the file->f_version, so we want to
+@@ -254,10 +172,8 @@
+ Done:
+       if (!copied)
+               copied = err;
+-      else {
++      else
+               *ppos += copied;
+-              m->read_pos += copied;
+-      }
+       file->f_version = m->version;
+       mutex_unlock(&m->lock);
+       return copied;
+@@ -270,6 +186,63 @@
+ }
+ EXPORT_SYMBOL(seq_read);
++static int traverse(struct seq_file *m, loff_t offset)
++{
++      loff_t pos = 0, index;
++      int error = 0;
++      void *p;
++
++      m->version = 0;
++      index = 0;
++      m->count = m->from = 0;
++      if (!offset) {
++              m->index = index;
++              return 0;
++      }
++      if (!m->buf) {
++              m->buf = kmalloc(m->size = PAGE_SIZE, GFP_KERNEL);
++              if (!m->buf)
++                      return -ENOMEM;
++      }
++      p = m->op->start(m, &index);
++      while (p) {
++              error = PTR_ERR(p);
++              if (IS_ERR(p))
++                      break;
++              error = m->op->show(m, p);
++              if (error < 0)
++                      break;
++              if (unlikely(error)) {
++                      error = 0;
++                      m->count = 0;
++              }
++              if (m->count == m->size)
++                      goto Eoverflow;
++              if (pos + m->count > offset) {
++                      m->from = offset - pos;
++                      m->count -= m->from;
++                      m->index = index;
++                      break;
++              }
++              pos += m->count;
++              m->count = 0;
++              if (pos == offset) {
++                      index++;
++                      m->index = index;
++                      break;
++              }
++              p = m->op->next(m, p, &index);
++      }
++      m->op->stop(m, p);
++      return error;
++
++Eoverflow:
++      m->op->stop(m, p);
++      kfree(m->buf);
++      m->buf = kmalloc(m->size <<= 1, GFP_KERNEL);
++      return !m->buf ? -ENOMEM : -EAGAIN;
++}
++
+ /**
+  *    seq_lseek -     ->llseek() method for sequential files.
+  *    @file: the file in question
+@@ -292,18 +265,16 @@
+                       if (offset < 0)
+                               break;
+                       retval = offset;
+-                      if (offset != m->read_pos) {
++                      if (offset != file->f_pos) {
+                               while ((retval=traverse(m, offset)) == -EAGAIN)
+                                       ;
+                               if (retval) {
+                                       /* with extreme prejudice... */
+                                       file->f_pos = 0;
+-                                      m->read_pos = 0;
+                                       m->version = 0;
+                                       m->index = 0;
+                                       m->count = 0;
+                               } else {
+-                                      m->read_pos = offset;
+                                       retval = file->f_pos = offset;
+                               }
+                       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/squashfs/block.c linux-2.6.29-rc3.owrt/fs/squashfs/block.c
+--- linux-2.6.29.owrt/fs/squashfs/block.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/squashfs/block.c  2009-05-10 23:48:29.000000000 +0200
+@@ -80,7 +80,7 @@
+  * generated a larger block - this does occasionally happen with zlib).
+  */
+ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
+-                      int length, u64 *next_index, int srclength, int pages)
++                      int length, u64 *next_index, int srclength)
+ {
+       struct squashfs_sb_info *msblk = sb->s_fs_info;
+       struct buffer_head **bh;
+@@ -184,7 +184,7 @@
+                               offset = 0;
+                       }
+-                      if (msblk->stream.avail_out == 0 && page < pages) {
++                      if (msblk->stream.avail_out == 0) {
+                               msblk->stream.next_out = buffer[page++];
+                               msblk->stream.avail_out = PAGE_CACHE_SIZE;
+                       }
+@@ -201,20 +201,25 @@
+                               zlib_init = 1;
+                       }
+-                      zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++                      zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
+                       if (msblk->stream.avail_in == 0 && k < b)
+                               put_bh(bh[k++]);
+               } while (zlib_err == Z_OK);
+               if (zlib_err != Z_STREAM_END) {
+-                      ERROR("zlib_inflate error, data probably corrupt\n");
++                      ERROR("zlib_inflate returned unexpected result"
++                              " 0x%x, srclength %d, avail_in %d,"
++                              " avail_out %d\n", zlib_err, srclength,
++                              msblk->stream.avail_in,
++                              msblk->stream.avail_out);
+                       goto release_mutex;
+               }
+               zlib_err = zlib_inflateEnd(&msblk->stream);
+               if (zlib_err != Z_OK) {
+-                      ERROR("zlib_inflate error, data probably corrupt\n");
++                      ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
++                              " srclength %d\n", zlib_err, srclength);
+                       goto release_mutex;
+               }
+               length = msblk->stream.total_out;
+@@ -263,8 +268,7 @@
+               put_bh(bh[k]);
+ read_failure:
+-      ERROR("squashfs_read_data failed to read block 0x%llx\n",
+-                                      (unsigned long long) index);
++      ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+       kfree(bh);
+       return -EIO;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/squashfs/cache.c linux-2.6.29-rc3.owrt/fs/squashfs/cache.c
+--- linux-2.6.29.owrt/fs/squashfs/cache.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/squashfs/cache.c  2009-05-10 23:48:29.000000000 +0200
+@@ -119,7 +119,7 @@
+                       entry->length = squashfs_read_data(sb, entry->data,
+                               block, length, &entry->next_index,
+-                              cache->block_size, cache->pages);
++                              cache->block_size);
+                       spin_lock(&cache->lock);
+@@ -406,7 +406,7 @@
+       for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
+               data[i] = buffer;
+       res = squashfs_read_data(sb, data, block, length |
+-              SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
++              SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+       kfree(data);
+       return res;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/squashfs/inode.c linux-2.6.29-rc3.owrt/fs/squashfs/inode.c
+--- linux-2.6.29.owrt/fs/squashfs/inode.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/squashfs/inode.c  2009-05-10 23:48:29.000000000 +0200
+@@ -133,8 +133,7 @@
+       type = le16_to_cpu(sqshb_ino->inode_type);
+       switch (type) {
+       case SQUASHFS_REG_TYPE: {
+-              unsigned int frag_offset, frag;
+-              int frag_size;
++              unsigned int frag_offset, frag_size, frag;
+               u64 frag_blk;
+               struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
+@@ -176,8 +175,7 @@
+               break;
+       }
+       case SQUASHFS_LREG_TYPE: {
+-              unsigned int frag_offset, frag;
+-              int frag_size;
++              unsigned int frag_offset, frag_size, frag;
+               u64 frag_blk;
+               struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/squashfs/squashfs.h linux-2.6.29-rc3.owrt/fs/squashfs/squashfs.h
+--- linux-2.6.29.owrt/fs/squashfs/squashfs.h   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/squashfs/squashfs.h       2009-05-10 23:48:29.000000000 +0200
+@@ -34,7 +34,7 @@
+ /* block.c */
+ extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
+-                              int, int);
++                              int);
+ /* cache.c */
+ extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/squashfs/super.c linux-2.6.29-rc3.owrt/fs/squashfs/super.c
+--- linux-2.6.29.owrt/fs/squashfs/super.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/squashfs/super.c  2009-05-10 23:48:29.000000000 +0200
+@@ -389,7 +389,7 @@
+               return err;
+       }
+-      printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
++      printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+               "Phillip Lougher\n");
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/super.c linux-2.6.29-rc3.owrt/fs/super.c
+--- linux-2.6.29.owrt/fs/super.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/super.c   2009-05-10 23:48:29.000000000 +0200
+@@ -82,22 +82,7 @@
+                * lock ordering than usbfs:
+                */
+               lockdep_set_class(&s->s_lock, &type->s_lock_key);
+-              /*
+-               * sget() can have s_umount recursion.
+-               *
+-               * When it cannot find a suitable sb, it allocates a new
+-               * one (this one), and tries again to find a suitable old
+-               * one.
+-               *
+-               * In case that succeeds, it will acquire the s_umount
+-               * lock of the old one. Since these are clearly distrinct
+-               * locks, and this object isn't exposed yet, there's no
+-               * risk of deadlocks.
+-               *
+-               * Annotate this by putting this lock in a different
+-               * subclass.
+-               */
+-              down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING);
++              down_write(&s->s_umount);
+               s->s_count = S_BIAS;
+               atomic_set(&s->s_active, 1);
+               mutex_init(&s->s_vfs_rename_mutex);
+@@ -316,7 +301,7 @@
+               /*
+                * wait for asynchronous fs operations to finish before going further
+                */
+-              async_synchronize_full_domain(&sb->s_async_list);
++              async_synchronize_full_special(&sb->s_async_list);
+               /* bad name - it should be evict_inodes() */
+               invalidate_inodes(sb);
+@@ -371,10 +356,8 @@
+                               continue;
+                       if (!grab_super(old))
+                               goto retry;
+-                      if (s) {
+-                              up_write(&s->s_umount);
++                      if (s)
+                               destroy_super(s);
+-                      }
+                       return old;
+               }
+       }
+@@ -389,7 +372,6 @@
+       err = set(s, data);
+       if (err) {
+               spin_unlock(&sb_lock);
+-              up_write(&s->s_umount);
+               destroy_super(s);
+               return ERR_PTR(err);
+       }
+@@ -488,7 +470,7 @@
+               sb->s_count++;
+               spin_unlock(&sb_lock);
+               down_read(&sb->s_umount);
+-              async_synchronize_full_domain(&sb->s_async_list);
++              async_synchronize_full_special(&sb->s_async_list);
+               if (sb->s_root && (wait || sb->s_dirt))
+                       sb->s_op->sync_fs(sb, wait);
+               up_read(&sb->s_umount);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/timerfd.c linux-2.6.29-rc3.owrt/fs/timerfd.c
+--- linux-2.6.29.owrt/fs/timerfd.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/timerfd.c 2009-05-10 23:48:29.000000000 +0200
+@@ -186,9 +186,10 @@
+       BUILD_BUG_ON(TFD_CLOEXEC != O_CLOEXEC);
+       BUILD_BUG_ON(TFD_NONBLOCK != O_NONBLOCK);
+-      if ((flags & ~TFD_CREATE_FLAGS) ||
+-          (clockid != CLOCK_MONOTONIC &&
+-           clockid != CLOCK_REALTIME))
++      if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK))
++              return -EINVAL;
++      if (clockid != CLOCK_MONOTONIC &&
++          clockid != CLOCK_REALTIME)
+               return -EINVAL;
+       ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+@@ -200,7 +201,7 @@
+       hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
+       ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx,
+-                             flags & TFD_SHARED_FCNTL_FLAGS);
++                             flags & (O_CLOEXEC | O_NONBLOCK));
+       if (ufd < 0)
+               kfree(ctx);
+@@ -218,8 +219,7 @@
+       if (copy_from_user(&ktmr, utmr, sizeof(ktmr)))
+               return -EFAULT;
+-      if ((flags & ~TFD_SETTIME_FLAGS) ||
+-          !timespec_valid(&ktmr.it_value) ||
++      if (!timespec_valid(&ktmr.it_value) ||
+           !timespec_valid(&ktmr.it_interval))
+               return -EINVAL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/budget.c linux-2.6.29-rc3.owrt/fs/ubifs/budget.c
+--- linux-2.6.29.owrt/fs/ubifs/budget.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/budget.c    2009-05-10 23:48:29.000000000 +0200
+@@ -689,7 +689,7 @@
+ }
+ /**
+- * ubifs_get_free_space_nolock - return amount of free space.
++ * ubifs_get_free_space - return amount of free space.
+  * @c: UBIFS file-system description object
+  *
+  * This function calculates amount of free space to report to user-space.
+@@ -704,14 +704,16 @@
+  * traditional file-systems, because they have way less overhead than UBIFS.
+  * So, to keep users happy, UBIFS tries to take the overhead into account.
+  */
+-long long ubifs_get_free_space_nolock(struct ubifs_info *c)
++long long ubifs_get_free_space(struct ubifs_info *c)
+ {
+-      int rsvd_idx_lebs, lebs;
++      int min_idx_lebs, rsvd_idx_lebs, lebs;
+       long long available, outstanding, free;
+-      ubifs_assert(c->min_idx_lebs == ubifs_calc_min_idx_lebs(c));
++      spin_lock(&c->space_lock);
++      min_idx_lebs = c->min_idx_lebs;
++      ubifs_assert(min_idx_lebs == ubifs_calc_min_idx_lebs(c));
+       outstanding = c->budg_data_growth + c->budg_dd_growth;
+-      available = ubifs_calc_available(c, c->min_idx_lebs);
++      available = ubifs_calc_available(c, min_idx_lebs);
+       /*
+        * When reporting free space to user-space, UBIFS guarantees that it is
+@@ -724,14 +726,15 @@
+        * Note, the calculations below are similar to what we have in
+        * 'do_budget_space()', so refer there for comments.
+        */
+-      if (c->min_idx_lebs > c->lst.idx_lebs)
+-              rsvd_idx_lebs = c->min_idx_lebs - c->lst.idx_lebs;
++      if (min_idx_lebs > c->lst.idx_lebs)
++              rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+       else
+               rsvd_idx_lebs = 0;
+       lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+              c->lst.taken_empty_lebs;
+       lebs -= rsvd_idx_lebs;
+       available += lebs * (c->dark_wm - c->leb_overhead);
++      spin_unlock(&c->space_lock);
+       if (available > outstanding)
+               free = ubifs_reported_space(c, available - outstanding);
+@@ -739,21 +742,3 @@
+               free = 0;
+       return free;
+ }
+-
+-/**
+- * ubifs_get_free_space - return amount of free space.
+- * @c: UBIFS file-system description object
+- *
+- * This function calculates and retuns amount of free space to report to
+- * user-space.
+- */
+-long long ubifs_get_free_space(struct ubifs_info *c)
+-{
+-      long long free;
+-
+-      spin_lock(&c->space_lock);
+-      free = ubifs_get_free_space_nolock(c);
+-      spin_unlock(&c->space_lock);
+-
+-      return free;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/debug.c linux-2.6.29-rc3.owrt/fs/ubifs/debug.c
+--- linux-2.6.29.owrt/fs/ubifs/debug.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/debug.c     2009-05-10 23:48:29.000000000 +0200
+@@ -620,11 +620,9 @@
+              c->dark_wm, c->dead_wm, c->max_idx_node_sz);
+       printk(KERN_DEBUG "\tgc_lnum %d, ihead_lnum %d\n",
+              c->gc_lnum, c->ihead_lnum);
+-      /* If we are in R/O mode, journal heads do not exist */
+-      if (c->jheads)
+-              for (i = 0; i < c->jhead_cnt; i++)
+-                      printk(KERN_DEBUG "\tjhead %d\t LEB %d\n",
+-                             c->jheads[i].wbuf.jhead, c->jheads[i].wbuf.lnum);
++      for (i = 0; i < c->jhead_cnt; i++)
++              printk(KERN_DEBUG "\tjhead %d\t LEB %d\n",
++                     c->jheads[i].wbuf.jhead, c->jheads[i].wbuf.lnum);
+       for (rb = rb_first(&c->buds); rb; rb = rb_next(rb)) {
+               bud = rb_entry(rb, struct ubifs_bud, rb);
+               printk(KERN_DEBUG "\tbud LEB %d\n", bud->lnum);
+@@ -639,7 +637,10 @@
+       /* Print budgeting predictions */
+       available = ubifs_calc_available(c, c->min_idx_lebs);
+       outstanding = c->budg_data_growth + c->budg_dd_growth;
+-      free = ubifs_get_free_space_nolock(c);
++      if (available > outstanding)
++              free = ubifs_reported_space(c, available - outstanding);
++      else
++              free = 0;
+       printk(KERN_DEBUG "Budgeting predictions:\n");
+       printk(KERN_DEBUG "\tavailable: %lld, outstanding %lld, free %lld\n",
+              available, outstanding, free);
+@@ -860,65 +861,6 @@
+ }
+ /**
+- * dbg_save_space_info - save information about flash space.
+- * @c: UBIFS file-system description object
+- *
+- * This function saves information about UBIFS free space, dirty space, etc, in
+- * order to check it later.
+- */
+-void dbg_save_space_info(struct ubifs_info *c)
+-{
+-      struct ubifs_debug_info *d = c->dbg;
+-
+-      ubifs_get_lp_stats(c, &d->saved_lst);
+-
+-      spin_lock(&c->space_lock);
+-      d->saved_free = ubifs_get_free_space_nolock(c);
+-      spin_unlock(&c->space_lock);
+-}
+-
+-/**
+- * dbg_check_space_info - check flash space information.
+- * @c: UBIFS file-system description object
+- *
+- * This function compares current flash space information with the information
+- * which was saved when the 'dbg_save_space_info()' function was called.
+- * Returns zero if the information has not changed, and %-EINVAL it it has
+- * changed.
+- */
+-int dbg_check_space_info(struct ubifs_info *c)
+-{
+-      struct ubifs_debug_info *d = c->dbg;
+-      struct ubifs_lp_stats lst;
+-      long long avail, free;
+-
+-      spin_lock(&c->space_lock);
+-      avail = ubifs_calc_available(c, c->min_idx_lebs);
+-      spin_unlock(&c->space_lock);
+-      free = ubifs_get_free_space(c);
+-
+-      if (free != d->saved_free) {
+-              ubifs_err("free space changed from %lld to %lld",
+-                        d->saved_free, free);
+-              goto out;
+-      }
+-
+-      return 0;
+-
+-out:
+-      ubifs_msg("saved lprops statistics dump");
+-      dbg_dump_lstats(&d->saved_lst);
+-      ubifs_get_lp_stats(c, &lst);
+-      ubifs_msg("current lprops statistics dump");
+-      dbg_dump_lstats(&d->saved_lst);
+-      spin_lock(&c->space_lock);
+-      dbg_dump_budg(c);
+-      spin_unlock(&c->space_lock);
+-      dump_stack();
+-      return -EINVAL;
+-}
+-
+-/**
+  * dbg_check_synced_i_size - check synchronized inode size.
+  * @inode: inode to check
+  *
+@@ -1407,7 +1349,7 @@
+  * @c: UBIFS file-system description object
+  * @leaf_cb: called for each leaf node
+  * @znode_cb: called for each indexing node
+- * @priv: private data which is passed to callbacks
++ * @priv: private date which is passed to callbacks
+  *
+  * This function walks the UBIFS index and calls the @leaf_cb for each leaf
+  * node and @znode_cb for each indexing node. Returns zero in case of success
+@@ -2467,7 +2409,7 @@
+  * Root directory for UBIFS stuff in debugfs. Contains sub-directories which
+  * contain the stuff specific to particular file-system mounts.
+  */
+-static struct dentry *dfs_rootdir;
++static struct dentry *debugfs_rootdir;
+ /**
+  * dbg_debugfs_init - initialize debugfs file-system.
+@@ -2479,9 +2421,9 @@
+  */
+ int dbg_debugfs_init(void)
+ {
+-      dfs_rootdir = debugfs_create_dir("ubifs", NULL);
+-      if (IS_ERR(dfs_rootdir)) {
+-              int err = PTR_ERR(dfs_rootdir);
++      debugfs_rootdir = debugfs_create_dir("ubifs", NULL);
++      if (IS_ERR(debugfs_rootdir)) {
++              int err = PTR_ERR(debugfs_rootdir);
+               ubifs_err("cannot create \"ubifs\" debugfs directory, "
+                         "error %d\n", err);
+               return err;
+@@ -2495,7 +2437,7 @@
+  */
+ void dbg_debugfs_exit(void)
+ {
+-      debugfs_remove(dfs_rootdir);
++      debugfs_remove(debugfs_rootdir);
+ }
+ static int open_debugfs_file(struct inode *inode, struct file *file)
+@@ -2510,13 +2452,13 @@
+       struct ubifs_info *c = file->private_data;
+       struct ubifs_debug_info *d = c->dbg;
+-      if (file->f_path.dentry == d->dfs_dump_lprops)
++      if (file->f_path.dentry == d->dump_lprops)
+               dbg_dump_lprops(c);
+-      else if (file->f_path.dentry == d->dfs_dump_budg) {
++      else if (file->f_path.dentry == d->dump_budg) {
+               spin_lock(&c->space_lock);
+               dbg_dump_budg(c);
+               spin_unlock(&c->space_lock);
+-      } else if (file->f_path.dentry == d->dfs_dump_tnc) {
++      } else if (file->f_path.dentry == d->dump_tnc) {
+               mutex_lock(&c->tnc_mutex);
+               dbg_dump_tnc(c);
+               mutex_unlock(&c->tnc_mutex);
+@@ -2527,7 +2469,7 @@
+       return count;
+ }
+-static const struct file_operations dfs_fops = {
++static const struct file_operations debugfs_fops = {
+       .open = open_debugfs_file,
+       .write = write_debugfs_file,
+       .owner = THIS_MODULE,
+@@ -2552,32 +2494,36 @@
+       struct dentry *dent;
+       struct ubifs_debug_info *d = c->dbg;
+-      sprintf(d->dfs_dir_name, "ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
+-      d->dfs_dir = debugfs_create_dir(d->dfs_dir_name, dfs_rootdir);
+-      if (IS_ERR(d->dfs_dir)) {
+-              err = PTR_ERR(d->dfs_dir);
++      sprintf(d->debugfs_dir_name, "ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
++      d->debugfs_dir = debugfs_create_dir(d->debugfs_dir_name,
++                                            debugfs_rootdir);
++      if (IS_ERR(d->debugfs_dir)) {
++              err = PTR_ERR(d->debugfs_dir);
+               ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
+-                        d->dfs_dir_name, err);
++                        d->debugfs_dir_name, err);
+               goto out;
+       }
+       fname = "dump_lprops";
+-      dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
++      dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
++                                 &debugfs_fops);
+       if (IS_ERR(dent))
+               goto out_remove;
+-      d->dfs_dump_lprops = dent;
++      d->dump_lprops = dent;
+       fname = "dump_budg";
+-      dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
++      dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
++                                 &debugfs_fops);
+       if (IS_ERR(dent))
+               goto out_remove;
+-      d->dfs_dump_budg = dent;
++      d->dump_budg = dent;
+       fname = "dump_tnc";
+-      dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
++      dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
++                                 &debugfs_fops);
+       if (IS_ERR(dent))
+               goto out_remove;
+-      d->dfs_dump_tnc = dent;
++      d->dump_tnc = dent;
+       return 0;
+@@ -2585,7 +2531,7 @@
+       err = PTR_ERR(dent);
+       ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
+                 fname, err);
+-      debugfs_remove_recursive(d->dfs_dir);
++      debugfs_remove_recursive(d->debugfs_dir);
+ out:
+       return err;
+ }
+@@ -2596,7 +2542,7 @@
+  */
+ void dbg_debugfs_exit_fs(struct ubifs_info *c)
+ {
+-      debugfs_remove_recursive(c->dbg->dfs_dir);
++      debugfs_remove_recursive(c->dbg->debugfs_dir);
+ }
+ #endif /* CONFIG_UBIFS_FS_DEBUG */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/debug.h linux-2.6.29-rc3.owrt/fs/ubifs/debug.h
+--- linux-2.6.29.owrt/fs/ubifs/debug.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/debug.h     2009-05-10 23:48:29.000000000 +0200
+@@ -41,17 +41,15 @@
+  * @chk_lpt_wastage: used by LPT tree size checker
+  * @chk_lpt_lebs: used by LPT tree size checker
+  * @new_nhead_offs: used by LPT tree size checker
+- * @new_ihead_lnum: used by debugging to check @c->ihead_lnum
+- * @new_ihead_offs: used by debugging to check @c->ihead_offs
++ * @new_ihead_lnum: used by debugging to check ihead_lnum
++ * @new_ihead_offs: used by debugging to check ihead_offs
+  *
+- * @saved_lst: saved lprops statistics (used by 'dbg_save_space_info()')
+- * @saved_free: saved free space (used by 'dbg_save_space_info()')
+- *
+- * dfs_dir_name: name of debugfs directory containing this file-system's files
+- * dfs_dir: direntry object of the file-system debugfs directory
+- * dfs_dump_lprops: "dump lprops" debugfs knob
+- * dfs_dump_budg: "dump budgeting information" debugfs knob
+- * dfs_dump_tnc: "dump TNC" debugfs knob
++ * debugfs_dir_name: name of debugfs directory containing this file-system's
++ *                   files
++ * debugfs_dir: direntry object of the file-system debugfs directory
++ * dump_lprops: "dump lprops" debugfs knob
++ * dump_budg: "dump budgeting information" debugfs knob
++ * dump_tnc: "dump TNC" debugfs knob
+  */
+ struct ubifs_debug_info {
+       void *buf;
+@@ -71,14 +69,11 @@
+       int new_ihead_lnum;
+       int new_ihead_offs;
+-      struct ubifs_lp_stats saved_lst;
+-      long long saved_free;
+-
+-      char dfs_dir_name[100];
+-      struct dentry *dfs_dir;
+-      struct dentry *dfs_dump_lprops;
+-      struct dentry *dfs_dump_budg;
+-      struct dentry *dfs_dump_tnc;
++      char debugfs_dir_name[100];
++      struct dentry *debugfs_dir;
++      struct dentry *dump_lprops;
++      struct dentry *dump_budg;
++      struct dentry *dump_tnc;
+ };
+ #define ubifs_assert(expr) do {                                                \
+@@ -302,8 +297,7 @@
+                  dbg_znode_callback znode_cb, void *priv);
+ /* Checking functions */
+-void dbg_save_space_info(struct ubifs_info *c);
+-int dbg_check_space_info(struct ubifs_info *c);
++
+ int dbg_check_lprops(struct ubifs_info *c);
+ int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
+ int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
+@@ -445,8 +439,6 @@
+ #define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
+ #define dbg_old_index_check_init(c, zroot)         0
+-#define dbg_save_space_info(c)                     ({})
+-#define dbg_check_space_info(c)                    0
+ #define dbg_check_old_index(c, zroot)              0
+ #define dbg_check_cats(c)                          0
+ #define dbg_check_ltab(c)                          0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/dir.c linux-2.6.29-rc3.owrt/fs/ubifs/dir.c
+--- linux-2.6.29.owrt/fs/ubifs/dir.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/dir.c       2009-05-10 23:48:29.000000000 +0200
+@@ -482,29 +482,30 @@
+ }
+ /**
+- * lock_2_inodes - a wrapper for locking two UBIFS inodes.
++ * lock_2_inodes - lock two UBIFS inodes.
+  * @inode1: first inode
+  * @inode2: second inode
+- *
+- * We do not implement any tricks to guarantee strict lock ordering, because
+- * VFS has already done it for us on the @i_mutex. So this is just a simple
+- * wrapper function.
+  */
+ static void lock_2_inodes(struct inode *inode1, struct inode *inode2)
+ {
+-      mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
+-      mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
++      if (inode1->i_ino < inode2->i_ino) {
++              mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_2);
++              mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_3);
++      } else {
++              mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
++              mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_3);
++      }
+ }
+ /**
+- * unlock_2_inodes - a wrapper for unlocking two UBIFS inodes.
++ * unlock_2_inodes - unlock two UBIFS inodes inodes.
+  * @inode1: first inode
+  * @inode2: second inode
+  */
+ static void unlock_2_inodes(struct inode *inode1, struct inode *inode2)
+ {
+-      mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+       mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
++      mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+ }
+ static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
+@@ -526,8 +527,6 @@
+       dbg_gen("dent '%.*s' to ino %lu (nlink %d) in dir ino %lu",
+               dentry->d_name.len, dentry->d_name.name, inode->i_ino,
+               inode->i_nlink, dir->i_ino);
+-      ubifs_assert(mutex_is_locked(&dir->i_mutex));
+-      ubifs_assert(mutex_is_locked(&inode->i_mutex));
+       err = dbg_check_synced_i_size(inode);
+       if (err)
+               return err;
+@@ -581,8 +580,6 @@
+       dbg_gen("dent '%.*s' from ino %lu (nlink %d) in dir ino %lu",
+               dentry->d_name.len, dentry->d_name.name, inode->i_ino,
+               inode->i_nlink, dir->i_ino);
+-      ubifs_assert(mutex_is_locked(&dir->i_mutex));
+-      ubifs_assert(mutex_is_locked(&inode->i_mutex));
+       err = dbg_check_synced_i_size(inode);
+       if (err)
+               return err;
+@@ -670,8 +667,7 @@
+       dbg_gen("directory '%.*s', ino %lu in dir ino %lu", dentry->d_name.len,
+               dentry->d_name.name, inode->i_ino, dir->i_ino);
+-      ubifs_assert(mutex_is_locked(&dir->i_mutex));
+-      ubifs_assert(mutex_is_locked(&inode->i_mutex));
++
+       err = check_dir_empty(c, dentry->d_inode);
+       if (err)
+               return err;
+@@ -926,30 +922,59 @@
+ }
+ /**
+- * lock_3_inodes - a wrapper for locking three UBIFS inodes.
++ * lock_3_inodes - lock three UBIFS inodes for rename.
+  * @inode1: first inode
+  * @inode2: second inode
+  * @inode3: third inode
+  *
+- * This function is used for 'ubifs_rename()' and @inode1 may be the same as
+- * @inode2 whereas @inode3 may be %NULL.
+- *
+- * We do not implement any tricks to guarantee strict lock ordering, because
+- * VFS has already done it for us on the @i_mutex. So this is just a simple
+- * wrapper function.
++ * For 'ubifs_rename()', @inode1 may be the same as @inode2 whereas @inode3 may
++ * be null.
+  */
+ static void lock_3_inodes(struct inode *inode1, struct inode *inode2,
+                         struct inode *inode3)
+ {
+-      mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
+-      if (inode2 != inode1)
+-              mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
+-      if (inode3)
+-              mutex_lock_nested(&ubifs_inode(inode3)->ui_mutex, WB_MUTEX_3);
++      struct inode *i1, *i2, *i3;
++
++      if (!inode3) {
++              if (inode1 != inode2) {
++                      lock_2_inodes(inode1, inode2);
++                      return;
++              }
++              mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
++              return;
++      }
++
++      if (inode1 == inode2) {
++              lock_2_inodes(inode1, inode3);
++              return;
++      }
++
++      /* 3 different inodes */
++      if (inode1 < inode2) {
++              i3 = inode2;
++              if (inode1 < inode3) {
++                      i1 = inode1;
++                      i2 = inode3;
++              } else {
++                      i1 = inode3;
++                      i2 = inode1;
++              }
++      } else {
++              i3 = inode1;
++              if (inode2 < inode3) {
++                      i1 = inode2;
++                      i2 = inode3;
++              } else {
++                      i1 = inode3;
++                      i2 = inode2;
++              }
++      }
++      mutex_lock_nested(&ubifs_inode(i1)->ui_mutex, WB_MUTEX_1);
++      lock_2_inodes(i2, i3);
+ }
+ /**
+- * unlock_3_inodes - a wrapper for unlocking three UBIFS inodes for rename.
++ * unlock_3_inodes - unlock three UBIFS inodes for rename.
+  * @inode1: first inode
+  * @inode2: second inode
+  * @inode3: third inode
+@@ -957,11 +982,11 @@
+ static void unlock_3_inodes(struct inode *inode1, struct inode *inode2,
+                           struct inode *inode3)
+ {
+-      if (inode3)
+-              mutex_unlock(&ubifs_inode(inode3)->ui_mutex);
++      mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
+       if (inode1 != inode2)
+               mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+-      mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
++      if (inode3)
++              mutex_unlock(&ubifs_inode(inode3)->ui_mutex);
+ }
+ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
+@@ -995,11 +1020,6 @@
+               "dir ino %lu", old_dentry->d_name.len, old_dentry->d_name.name,
+               old_inode->i_ino, old_dir->i_ino, new_dentry->d_name.len,
+               new_dentry->d_name.name, new_dir->i_ino);
+-      ubifs_assert(mutex_is_locked(&old_dir->i_mutex));
+-      ubifs_assert(mutex_is_locked(&new_dir->i_mutex));
+-      if (unlink)
+-              ubifs_assert(mutex_is_locked(&new_inode->i_mutex));
+-
+       if (unlink && is_dir) {
+               err = check_dir_empty(c, new_inode);
+@@ -1179,7 +1199,7 @@
+       return 0;
+ }
+-const struct inode_operations ubifs_dir_inode_operations = {
++struct inode_operations ubifs_dir_inode_operations = {
+       .lookup      = ubifs_lookup,
+       .create      = ubifs_create,
+       .link        = ubifs_link,
+@@ -1199,7 +1219,7 @@
+ #endif
+ };
+-const struct file_operations ubifs_dir_operations = {
++struct file_operations ubifs_dir_operations = {
+       .llseek         = ubifs_dir_llseek,
+       .release        = ubifs_dir_release,
+       .read           = generic_read_dir,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/file.c linux-2.6.29-rc3.owrt/fs/ubifs/file.c
+--- linux-2.6.29.owrt/fs/ubifs/file.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/file.c      2009-05-10 23:48:29.000000000 +0200
+@@ -432,6 +432,7 @@
+       int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
+       struct page *page;
++
+       ubifs_assert(ubifs_inode(inode)->ui_size == inode->i_size);
+       if (unlikely(c->ro_media))
+@@ -1540,7 +1541,7 @@
+       return 0;
+ }
+-const struct address_space_operations ubifs_file_address_operations = {
++struct address_space_operations ubifs_file_address_operations = {
+       .readpage       = ubifs_readpage,
+       .writepage      = ubifs_writepage,
+       .write_begin    = ubifs_write_begin,
+@@ -1550,7 +1551,7 @@
+       .releasepage    = ubifs_releasepage,
+ };
+-const struct inode_operations ubifs_file_inode_operations = {
++struct inode_operations ubifs_file_inode_operations = {
+       .setattr     = ubifs_setattr,
+       .getattr     = ubifs_getattr,
+ #ifdef CONFIG_UBIFS_FS_XATTR
+@@ -1561,14 +1562,14 @@
+ #endif
+ };
+-const struct inode_operations ubifs_symlink_inode_operations = {
++struct inode_operations ubifs_symlink_inode_operations = {
+       .readlink    = generic_readlink,
+       .follow_link = ubifs_follow_link,
+       .setattr     = ubifs_setattr,
+       .getattr     = ubifs_getattr,
+ };
+-const struct file_operations ubifs_file_operations = {
++struct file_operations ubifs_file_operations = {
+       .llseek         = generic_file_llseek,
+       .read           = do_sync_read,
+       .write          = do_sync_write,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/gc.c linux-2.6.29-rc3.owrt/fs/ubifs/gc.c
+--- linux-2.6.29.owrt/fs/ubifs/gc.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/gc.c        2009-05-10 23:48:29.000000000 +0200
+@@ -31,26 +31,6 @@
+  * to be reused. Garbage collection will cause the number of dirty index nodes
+  * to grow, however sufficient space is reserved for the index to ensure the
+  * commit will never run out of space.
+- *
+- * Notes about dead watermark. At current UBIFS implementation we assume that
+- * LEBs which have less than @c->dead_wm bytes of free + dirty space are full
+- * and not worth garbage-collecting. The dead watermark is one min. I/O unit
+- * size, or min. UBIFS node size, depending on what is greater. Indeed, UBIFS
+- * Garbage Collector has to synchronize the GC head's write buffer before
+- * returning, so this is about wasting one min. I/O unit. However, UBIFS GC can
+- * actually reclaim even very small pieces of dirty space by garbage collecting
+- * enough dirty LEBs, but we do not bother doing this at this implementation.
+- *
+- * Notes about dark watermark. The results of GC work depends on how big are
+- * the UBIFS nodes GC deals with. Large nodes make GC waste more space. Indeed,
+- * if GC move data from LEB A to LEB B and nodes in LEB A are large, GC would
+- * have to waste large pieces of free space at the end of LEB B, because nodes
+- * from LEB A would not fit. And the worst situation is when all nodes are of
+- * maximum size. So dark watermark is the amount of free + dirty space in LEB
+- * which are guaranteed to be reclaimable. If LEB has less space, the GC migh
+- * be unable to reclaim it. So, LEBs with free + dirty greater than dark
+- * watermark are "good" LEBs from GC's point of few. The other LEBs are not so
+- * good, and GC takes extra care when moving them.
+  */
+ #include <linux/pagemap.h>
+@@ -401,7 +381,7 @@
+               /*
+                * Don't release the LEB until after the next commit, because
+-               * it may contain data which is needed for recovery. So
++               * it may contain date which is needed for recovery. So
+                * although we freed this LEB, it will become usable only after
+                * the commit.
+                */
+@@ -830,9 +810,8 @@
+  * ubifs_destroy_idx_gc - destroy idx_gc list.
+  * @c: UBIFS file-system description object
+  *
+- * This function destroys the @c->idx_gc list. It is called when unmounting
+- * so locks are not needed. Returns zero in case of success and a negative
+- * error code in case of failure.
++ * This function destroys the idx_gc list. It is called when unmounting or
++ * remounting read-only so locks are not needed.
+  */
+ void ubifs_destroy_idx_gc(struct ubifs_info *c)
+ {
+@@ -845,6 +824,7 @@
+               list_del(&idx_gc->list);
+               kfree(idx_gc);
+       }
++
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/io.c linux-2.6.29-rc3.owrt/fs/ubifs/io.c
+--- linux-2.6.29.owrt/fs/ubifs/io.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/io.c        2009-05-10 23:48:29.000000000 +0200
+@@ -29,7 +29,7 @@
+  * would have been wasted for padding to the nearest minimal I/O unit boundary.
+  * Instead, data first goes to the write-buffer and is flushed when the
+  * buffer is full or when it is not used for some time (by timer). This is
+- * similar to the mechanism is used by JFFS2.
++ * similarto the mechanism is used by JFFS2.
+  *
+  * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by
+  * mutexes defined inside these objects. Since sometimes upper-level code
+@@ -75,7 +75,7 @@
+  * @lnum: logical eraseblock number
+  * @offs: offset within the logical eraseblock
+  * @quiet: print no messages
+- * @must_chk_crc: indicates whether to always check the CRC
++ * @chk_crc: indicates whether to always check the CRC
+  *
+  * This function checks node magic number and CRC checksum. This function also
+  * validates node length to prevent UBIFS from becoming crazy when an attacker
+@@ -83,17 +83,11 @@
+  * node length in the common header could cause UBIFS to read memory outside of
+  * allocated buffer when checking the CRC checksum.
+  *
+- * This function may skip data nodes CRC checking if @c->no_chk_data_crc is
+- * true, which is controlled by corresponding UBIFS mount option. However, if
+- * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is
+- * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is
+- * ignored and CRC is checked.
+- *
+- * This function returns zero in case of success and %-EUCLEAN in case of bad
+- * CRC or magic.
++ * This function returns zero in case of success %-EUCLEAN in case of bad CRC
++ * or magic.
+  */
+ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
+-                   int offs, int quiet, int must_chk_crc)
++                   int offs, int quiet, int chk_crc)
+ {
+       int err = -EINVAL, type, node_len;
+       uint32_t crc, node_crc, magic;
+@@ -129,9 +123,9 @@
+                  node_len > c->ranges[type].max_len)
+               goto out_len;
+-      if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc &&
+-           c->no_chk_data_crc)
+-              return 0;
++      if (!chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc)
++              if (c->no_chk_data_crc)
++                      return 0;
+       crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
+       node_crc = le32_to_cpu(ch->crc);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/journal.c linux-2.6.29-rc3.owrt/fs/ubifs/journal.c
+--- linux-2.6.29.owrt/fs/ubifs/journal.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/journal.c   2009-05-10 23:48:29.000000000 +0200
+@@ -208,7 +208,7 @@
+       offs = 0;
+ out:
+-      err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, wbuf->dtype);
++      err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, UBI_SHORTTERM);
+       if (err)
+               goto out_unlock;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/lprops.c linux-2.6.29-rc3.owrt/fs/ubifs/lprops.c
+--- linux-2.6.29.owrt/fs/ubifs/lprops.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/lprops.c    2009-05-10 23:48:29.000000000 +0200
+@@ -635,10 +635,10 @@
+  * @c: UBIFS file-system description object
+  * @st: return statistics
+  */
+-void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *lst)
++void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *st)
+ {
+       spin_lock(&c->space_lock);
+-      memcpy(lst, &c->lst, sizeof(struct ubifs_lp_stats));
++      memcpy(st, &c->lst, sizeof(struct ubifs_lp_stats));
+       spin_unlock(&c->space_lock);
+ }
+@@ -678,9 +678,6 @@
+ out:
+       ubifs_release_lprops(c);
+-      if (err)
+-              ubifs_err("cannot change properties of LEB %d, error %d",
+-                        lnum, err);
+       return err;
+ }
+@@ -717,9 +714,6 @@
+ out:
+       ubifs_release_lprops(c);
+-      if (err)
+-              ubifs_err("cannot update properties of LEB %d, error %d",
+-                        lnum, err);
+       return err;
+ }
+@@ -743,8 +737,6 @@
+       lpp = ubifs_lpt_lookup(c, lnum);
+       if (IS_ERR(lpp)) {
+               err = PTR_ERR(lpp);
+-              ubifs_err("cannot read properties of LEB %d, error %d",
+-                        lnum, err);
+               goto out;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/lpt_commit.c linux-2.6.29-rc3.owrt/fs/ubifs/lpt_commit.c
+--- linux-2.6.29.owrt/fs/ubifs/lpt_commit.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/lpt_commit.c        2009-05-10 23:48:29.000000000 +0200
+@@ -556,23 +556,23 @@
+ }
+ /**
+- * next_pnode_to_dirty - find next pnode to dirty.
++ * next_pnode - find next pnode.
+  * @c: UBIFS file-system description object
+  * @pnode: pnode
+  *
+- * This function returns the next pnode to dirty or %NULL if there are no more
+- * pnodes.  Note that pnodes that have never been written (lnum == 0) are
+- * skipped.
++ * This function returns the next pnode or %NULL if there are no more pnodes.
+  */
+-static struct ubifs_pnode *next_pnode_to_dirty(struct ubifs_info *c,
+-                                             struct ubifs_pnode *pnode)
++static struct ubifs_pnode *next_pnode(struct ubifs_info *c,
++                                    struct ubifs_pnode *pnode)
+ {
+       struct ubifs_nnode *nnode;
+       int iip;
+       /* Try to go right */
+       nnode = pnode->parent;
+-      for (iip = pnode->iip + 1; iip < UBIFS_LPT_FANOUT; iip++) {
++      iip = pnode->iip + 1;
++      if (iip < UBIFS_LPT_FANOUT) {
++              /* We assume here that LEB zero is never an LPT LEB */
+               if (nnode->nbranch[iip].lnum)
+                       return ubifs_get_pnode(c, nnode, iip);
+       }
+@@ -583,11 +583,8 @@
+               nnode = nnode->parent;
+               if (!nnode)
+                       return NULL;
+-              for (; iip < UBIFS_LPT_FANOUT; iip++) {
+-                      if (nnode->nbranch[iip].lnum)
+-                              break;
+-              }
+-       } while (iip >= UBIFS_LPT_FANOUT);
++              /* We assume here that LEB zero is never an LPT LEB */
++      } while (iip >= UBIFS_LPT_FANOUT || !nnode->nbranch[iip].lnum);
+       /* Go right */
+       nnode = ubifs_get_nnode(c, nnode, iip);
+@@ -596,29 +593,12 @@
+       /* Go down to level 1 */
+       while (nnode->level > 1) {
+-              for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++) {
+-                      if (nnode->nbranch[iip].lnum)
+-                              break;
+-              }
+-              if (iip >= UBIFS_LPT_FANOUT) {
+-                      /*
+-                       * Should not happen, but we need to keep going
+-                       * if it does.
+-                       */
+-                      iip = 0;
+-              }
+-              nnode = ubifs_get_nnode(c, nnode, iip);
++              nnode = ubifs_get_nnode(c, nnode, 0);
+               if (IS_ERR(nnode))
+                       return (void *)nnode;
+       }
+-      for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++)
+-              if (nnode->nbranch[iip].lnum)
+-                      break;
+-      if (iip >= UBIFS_LPT_FANOUT)
+-              /* Should not happen, but we need to keep going if it does */
+-              iip = 0;
+-      return ubifs_get_pnode(c, nnode, iip);
++      return ubifs_get_pnode(c, nnode, 0);
+ }
+ /**
+@@ -708,7 +688,7 @@
+       pnode = pnode_lookup(c, 0);
+       while (pnode) {
+               do_make_pnode_dirty(c, pnode);
+-              pnode = next_pnode_to_dirty(c, pnode);
++              pnode = next_pnode(c, pnode);
+               if (IS_ERR(pnode))
+                       return PTR_ERR(pnode);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/master.c linux-2.6.29-rc3.owrt/fs/ubifs/master.c
+--- linux-2.6.29.owrt/fs/ubifs/master.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/master.c    2009-05-10 23:48:29.000000000 +0200
+@@ -354,7 +354,7 @@
+       int err, lnum, offs, len;
+       if (c->ro_media)
+-              return -EROFS;
++              return -EINVAL;
+       lnum = UBIFS_MST_LNUM;
+       offs = c->mst_offs + c->mst_node_alsz;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/orphan.c linux-2.6.29-rc3.owrt/fs/ubifs/orphan.c
+--- linux-2.6.29.owrt/fs/ubifs/orphan.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/orphan.c    2009-05-10 23:48:29.000000000 +0200
+@@ -46,7 +46,7 @@
+  * Orphans are accumulated in a rb-tree. When an inode's link count drops to
+  * zero, the inode number is added to the rb-tree. It is removed from the tree
+  * when the inode is deleted.  Any new orphans that are in the orphan tree when
+- * the commit is run, are written to the orphan area in 1 or more orphan nodes.
++ * the commit is run, are written to the orphan area in 1 or more orph nodes.
+  * If the orphan area is full, it is consolidated to make space.  There is
+  * always enough space because validation prevents the user from creating more
+  * than the maximum number of orphans allowed.
+@@ -231,7 +231,7 @@
+ }
+ /**
+- * do_write_orph_node - write a node to the orphan head.
++ * do_write_orph_node - write a node
+  * @c: UBIFS file-system description object
+  * @len: length of node
+  * @atomic: write atomically
+@@ -264,11 +264,11 @@
+ }
+ /**
+- * write_orph_node - write an orphan node.
++ * write_orph_node - write an orph node
+  * @c: UBIFS file-system description object
+  * @atomic: write atomically
+  *
+- * This function builds an orphan node from the cnext list and writes it to the
++ * This function builds an orph node from the cnext list and writes it to the
+  * orphan head. On success, %0 is returned, otherwise a negative error code
+  * is returned.
+  */
+@@ -326,11 +326,11 @@
+ }
+ /**
+- * write_orph_nodes - write orphan nodes until there are no more to commit.
++ * write_orph_nodes - write orph nodes until there are no more to commit
+  * @c: UBIFS file-system description object
+  * @atomic: write atomically
+  *
+- * This function writes orphan nodes for all the orphans to commit. On success,
++ * This function writes orph nodes for all the orphans to commit. On success,
+  * %0 is returned, otherwise a negative error code is returned.
+  */
+ static int write_orph_nodes(struct ubifs_info *c, int atomic)
+@@ -478,14 +478,14 @@
+ }
+ /**
+- * ubifs_clear_orphans - erase all LEBs used for orphans.
++ * clear_orphans - erase all LEBs used for orphans.
+  * @c: UBIFS file-system description object
+  *
+  * If recovery is not required, then the orphans from the previous session
+  * are not needed. This function locates the LEBs used to record
+  * orphans, and un-maps them.
+  */
+-int ubifs_clear_orphans(struct ubifs_info *c)
++static int clear_orphans(struct ubifs_info *c)
+ {
+       int lnum, err;
+@@ -547,9 +547,9 @@
+  * do_kill_orphans - remove orphan inodes from the index.
+  * @c: UBIFS file-system description object
+  * @sleb: scanned LEB
+- * @last_cmt_no: cmt_no of last orphan node read is passed and returned here
++ * @last_cmt_no: cmt_no of last orph node read is passed and returned here
+  * @outofdate: whether the LEB is out of date is returned here
+- * @last_flagged: whether the end orphan node is encountered
++ * @last_flagged: whether the end orph node is encountered
+  *
+  * This function is a helper to the 'kill_orphans()' function. It goes through
+  * every orphan node in a LEB and for every inode number recorded, removes
+@@ -580,8 +580,8 @@
+               /*
+                * The commit number on the master node may be less, because
+                * of a failed commit. If there are several failed commits in a
+-               * row, the commit number written on orphan nodes will continue
+-               * to increase (because the commit number is adjusted here) even
++               * row, the commit number written on orph nodes will continue to
++               * increase (because the commit number is adjusted here) even
+                * though the commit number on the master node stays the same
+                * because the master node has not been re-written.
+                */
+@@ -589,9 +589,9 @@
+                       c->cmt_no = cmt_no;
+               if (cmt_no < *last_cmt_no && *last_flagged) {
+                       /*
+-                       * The last orphan node had a higher commit number and
+-                       * was flagged as the last written for that commit
+-                       * number. That makes this orphan node, out of date.
++                       * The last orph node had a higher commit number and was
++                       * flagged as the last written for that commit number.
++                       * That makes this orph node, out of date.
+                        */
+                       if (!first) {
+                               ubifs_err("out of order commit number %llu in "
+@@ -658,10 +658,10 @@
+       /*
+        * Orph nodes always start at c->orph_first and are written to each
+        * successive LEB in turn. Generally unused LEBs will have been unmapped
+-       * but may contain out of date orphan nodes if the unmap didn't go
+-       * through. In addition, the last orphan node written for each commit is
++       * but may contain out of date orph nodes if the unmap didn't go
++       * through. In addition, the last orph node written for each commit is
+        * marked (top bit of orph->cmt_no is set to 1). It is possible that
+-       * there are orphan nodes from the next commit (i.e. the commit did not
++       * there are orph nodes from the next commit (i.e. the commit did not
+        * complete successfully). In that case, no orphans will have been lost
+        * due to the way that orphans are written, and any orphans added will
+        * be valid orphans anyway and so can be deleted.
+@@ -718,7 +718,7 @@
+       if (unclean)
+               err = kill_orphans(c);
+       else if (!read_only)
+-              err = ubifs_clear_orphans(c);
++              err = clear_orphans(c);
+       return err;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/super.c linux-2.6.29-rc3.owrt/fs/ubifs/super.c
+--- linux-2.6.29.owrt/fs/ubifs/super.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/super.c     2009-05-10 23:48:29.000000000 +0200
+@@ -397,7 +397,6 @@
+       buf->f_namelen = UBIFS_MAX_NLEN;
+       buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+       buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
+-      ubifs_assert(buf->f_bfree <= c->block_cnt);
+       return 0;
+ }
+@@ -433,24 +432,33 @@
+       int i, err;
+       struct ubifs_info *c = sb->s_fs_info;
+       struct writeback_control wbc = {
+-              .sync_mode   = WB_SYNC_ALL,
++              .sync_mode   = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
+               .range_start = 0,
+               .range_end   = LLONG_MAX,
+               .nr_to_write = LONG_MAX,
+       };
+       /*
+-       * Zero @wait is just an advisory thing to help the file system shove
+-       * lots of data into the queues, and there will be the second
++       * Note by akpm about WB_SYNC_NONE used above: zero @wait is just an
++       * advisory thing to help the file system shove lots of data into the
++       * queues. If some gets missed then it'll be picked up on the second
+        * '->sync_fs()' call, with non-zero @wait.
+        */
+-      if (!wait)
+-              return 0;
+       if (sb->s_flags & MS_RDONLY)
+               return 0;
+       /*
++       * Synchronize write buffers, because 'ubifs_run_commit()' does not
++       * do this if it waits for an already running commit.
++       */
++      for (i = 0; i < c->jhead_cnt; i++) {
++              err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
++              if (err)
++                      return err;
++      }
++
++      /*
+        * VFS calls '->sync_fs()' before synchronizing all dirty inodes and
+        * pages, so synchronize them first, then commit the journal. Strictly
+        * speaking, it is not necessary to commit the journal here,
+@@ -461,16 +469,6 @@
+        */
+       generic_sync_sb_inodes(sb, &wbc);
+-      /*
+-       * Synchronize write buffers, because 'ubifs_run_commit()' does not
+-       * do this if it waits for an already running commit.
+-       */
+-      for (i = 0; i < c->jhead_cnt; i++) {
+-              err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
+-              if (err)
+-                      return err;
+-      }
+-
+       err = ubifs_run_commit(c);
+       if (err)
+               return err;
+@@ -574,8 +572,15 @@
+       c->ranges[UBIFS_IDX_NODE].max_len = INT_MAX;
+       /*
+-       * Initialize dead and dark LEB space watermarks. See gc.c for comments
+-       * about these values.
++       * Initialize dead and dark LEB space watermarks.
++       *
++       * Dead space is the space which cannot be used. Its watermark is
++       * equivalent to min. I/O unit or minimum node size if it is greater
++       * then min. I/O unit.
++       *
++       * Dark space is the space which might be used, or might not, depending
++       * on which node should be written to the LEB. Its watermark is
++       * equivalent to maximum UBIFS node size.
+        */
+       c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
+       c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
+@@ -736,12 +741,12 @@
+  * take_gc_lnum - reserve GC LEB.
+  * @c: UBIFS file-system description object
+  *
+- * This function ensures that the LEB reserved for garbage collection is marked
+- * as "taken" in lprops. We also have to set free space to LEB size and dirty
+- * space to zero, because lprops may contain out-of-date information if the
+- * file-system was un-mounted before it has been committed. This function
+- * returns zero in case of success and a negative error code in case of
+- * failure.
++ * This function ensures that the LEB reserved for garbage collection is
++ * unmapped and is marked as "taken" in lprops. We also have to set free space
++ * to LEB size and dirty space to zero, because lprops may contain out-of-date
++ * information if the file-system was un-mounted before it has been committed.
++ * This function returns zero in case of success and a negative error code in
++ * case of failure.
+  */
+ static int take_gc_lnum(struct ubifs_info *c)
+ {
+@@ -752,6 +757,10 @@
+               return -EINVAL;
+       }
++      err = ubifs_leb_unmap(c, c->gc_lnum);
++      if (err)
++              return err;
++
+       /* And we have to tell lprops that this LEB is taken */
+       err = ubifs_change_one_lp(c, c->gc_lnum, c->leb_size, 0,
+                                 LPROPS_TAKEN, 0, 0);
+@@ -957,16 +966,13 @@
+               token = match_token(p, tokens, args);
+               switch (token) {
+-              /*
+-               * %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
+-               * We accepte them in order to be backware-compatible. But this
+-               * should be removed at some point.
+-               */
+               case Opt_fast_unmount:
+                       c->mount_opts.unmount_mode = 2;
++                      c->fast_unmount = 1;
+                       break;
+               case Opt_norm_unmount:
+                       c->mount_opts.unmount_mode = 1;
++                      c->fast_unmount = 0;
+                       break;
+               case Opt_bulk_read:
+                       c->mount_opts.bulk_read = 2;
+@@ -1088,7 +1094,12 @@
+               ubifs_err("insufficient free space to mount in read/write mode");
+               dbg_dump_budg(c);
+               dbg_dump_lprops(c);
+-              return -ENOSPC;
++              /*
++               * We return %-EINVAL instead of %-ENOSPC because it seems to
++               * be the closest error code mentioned in the mount function
++               * documentation.
++               */
++              return -EINVAL;
+       }
+       return 0;
+ }
+@@ -1275,19 +1286,10 @@
+                       if (err)
+                               goto out_orphans;
+                       err = ubifs_rcvry_gc_commit(c);
+-              } else {
++              } else
+                       err = take_gc_lnum(c);
+-                      if (err)
+-                              goto out_orphans;
+-
+-                      /*
+-                       * GC LEB may contain garbage if there was an unclean
+-                       * reboot, and it should be un-mapped.
+-                       */
+-                      err = ubifs_leb_unmap(c, c->gc_lnum);
+-                      if (err)
+-                              return err;
+-              }
++              if (err)
++                      goto out_orphans;
+               err = dbg_check_lprops(c);
+               if (err)
+@@ -1296,16 +1298,6 @@
+               err = ubifs_recover_size(c);
+               if (err)
+                       goto out_orphans;
+-      } else {
+-              /*
+-               * Even if we mount read-only, we have to set space in GC LEB
+-               * to proper value because this affects UBIFS free space
+-               * reporting. We do not want to have a situation when
+-               * re-mounting from R/O to R/W changes amount of free space.
+-               */
+-              err = take_gc_lnum(c);
+-              if (err)
+-                      goto out_orphans;
+       }
+       spin_lock(&ubifs_infos_lock);
+@@ -1318,17 +1310,14 @@
+               else {
+                       c->need_recovery = 0;
+                       ubifs_msg("recovery completed");
+-                      /* GC LEB has to be empty and taken at this point */
+-                      ubifs_assert(c->lst.taken_empty_lebs == 1);
+               }
+-      } else
+-              ubifs_assert(c->lst.taken_empty_lebs == 1);
++      }
+-      err = dbg_check_filesystem(c);
++      err = dbg_debugfs_init_fs(c);
+       if (err)
+               goto out_infos;
+-      err = dbg_debugfs_init_fs(c);
++      err = dbg_check_filesystem(c);
+       if (err)
+               goto out_infos;
+@@ -1362,6 +1351,7 @@
+              c->uuid[4], c->uuid[5], c->uuid[6], c->uuid[7],
+              c->uuid[8], c->uuid[9], c->uuid[10], c->uuid[11],
+              c->uuid[12], c->uuid[13], c->uuid[14], c->uuid[15]);
++      dbg_msg("fast unmount:        %d", c->fast_unmount);
+       dbg_msg("big_lpt              %d", c->big_lpt);
+       dbg_msg("log LEBs:            %d (%d - %d)",
+               c->log_lebs, UBIFS_LOG_LNUM, c->log_last);
+@@ -1485,8 +1475,10 @@
+ {
+       int err, lnum;
++      if (c->ro_media)
++              return -EINVAL;
++
+       mutex_lock(&c->umount_mutex);
+-      dbg_save_space_info(c);
+       c->remounting_rw = 1;
+       c->always_chk_crc = 1;
+@@ -1522,12 +1514,6 @@
+               err = ubifs_recover_inl_heads(c, c->sbuf);
+               if (err)
+                       goto out;
+-      } else {
+-              /* A readonly mount is not allowed to have orphans */
+-              ubifs_assert(c->tot_orphans == 0);
+-              err = ubifs_clear_orphans(c);
+-              if (err)
+-                      goto out;
+       }
+       if (!(c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY))) {
+@@ -1583,7 +1569,7 @@
+       if (c->need_recovery)
+               err = ubifs_rcvry_gc_commit(c);
+       else
+-              err = ubifs_leb_unmap(c, c->gc_lnum);
++              err = take_gc_lnum(c);
+       if (err)
+               goto out;
+@@ -1596,9 +1582,8 @@
+       c->vfs_sb->s_flags &= ~MS_RDONLY;
+       c->remounting_rw = 0;
+       c->always_chk_crc = 0;
+-      err = dbg_check_space_info(c);
+       mutex_unlock(&c->umount_mutex);
+-      return err;
++      return 0;
+ out:
+       vfree(c->orph_buf);
+@@ -1618,18 +1603,43 @@
+ }
+ /**
++ * commit_on_unmount - commit the journal when un-mounting.
++ * @c: UBIFS file-system description object
++ *
++ * This function is called during un-mounting and re-mounting, and it commits
++ * the journal unless the "fast unmount" mode is enabled.
++ */
++static void commit_on_unmount(struct ubifs_info *c)
++{
++      struct super_block *sb = c->vfs_sb;
++      long long bud_bytes;
++
++      /*
++       * This function is called before the background thread is stopped, so
++       * we may race with ongoing commit, which means we have to take
++       * @c->bud_lock to access @c->bud_bytes.
++       */
++      spin_lock(&c->buds_lock);
++      bud_bytes = c->bud_bytes;
++      spin_unlock(&c->buds_lock);
++
++      if (!c->fast_unmount && !(sb->s_flags & MS_RDONLY) && bud_bytes)
++              ubifs_run_commit(c);
++}
++
++/**
+  * ubifs_remount_ro - re-mount in read-only mode.
+  * @c: UBIFS file-system description object
+  *
+- * We assume VFS has stopped writing. Possibly the background thread could be
+- * running a commit, however kthread_stop will wait in that case.
++ * We rely on VFS to have stopped writing. Possibly the background thread could
++ * be running a commit, however kthread_stop will wait in that case.
+  */
+ static void ubifs_remount_ro(struct ubifs_info *c)
+ {
+       int i, err;
+       ubifs_assert(!c->need_recovery);
+-      ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
++      commit_on_unmount(c);
+       mutex_lock(&c->umount_mutex);
+       if (c->bgt) {
+@@ -1637,29 +1647,27 @@
+               c->bgt = NULL;
+       }
+-      dbg_save_space_info(c);
+-
+       for (i = 0; i < c->jhead_cnt; i++) {
+               ubifs_wbuf_sync(&c->jheads[i].wbuf);
+               del_timer_sync(&c->jheads[i].wbuf.timer);
+       }
+-      c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
+-      c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
+-      c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
+-      err = ubifs_write_master(c);
+-      if (err)
+-              ubifs_ro_mode(c, err);
++      if (!c->ro_media) {
++              c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
++              c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
++              c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
++              err = ubifs_write_master(c);
++              if (err)
++                      ubifs_ro_mode(c, err);
++      }
++      ubifs_destroy_idx_gc(c);
+       free_wbufs(c);
+       vfree(c->orph_buf);
+       c->orph_buf = NULL;
+       vfree(c->ileb_buf);
+       c->ileb_buf = NULL;
+       ubifs_lpt_free(c, 1);
+-      err = dbg_check_space_info(c);
+-      if (err)
+-              ubifs_ro_mode(c, err);
+       mutex_unlock(&c->umount_mutex);
+ }
+@@ -1752,20 +1760,11 @@
+       }
+       if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
+-              if (c->ro_media) {
+-                      ubifs_msg("cannot re-mount due to prior errors");
+-                      return -EROFS;
+-              }
+               err = ubifs_remount_rw(c);
+               if (err)
+                       return err;
+-      } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
+-              if (c->ro_media) {
+-                      ubifs_msg("cannot re-mount due to prior errors");
+-                      return -EROFS;
+-              }
++      } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY))
+               ubifs_remount_ro(c);
+-      }
+       if (c->bulk_read == 1)
+               bu_init(c);
+@@ -1775,11 +1774,10 @@
+               c->bu.buf = NULL;
+       }
+-      ubifs_assert(c->lst.taken_empty_lebs == 1);
+       return 0;
+ }
+-const struct super_operations ubifs_super_operations = {
++struct super_operations ubifs_super_operations = {
+       .alloc_inode   = ubifs_alloc_inode,
+       .destroy_inode = ubifs_destroy_inode,
+       .put_super     = ubifs_put_super,
+@@ -2046,6 +2044,15 @@
+ static void ubifs_kill_sb(struct super_block *sb)
+ {
++      struct ubifs_info *c = sb->s_fs_info;
++
++      /*
++       * We do 'commit_on_unmount()' here instead of 'ubifs_put_super()'
++       * in order to be outside BKL.
++       */
++      if (sb->s_root)
++              commit_on_unmount(c);
++      /* The un-mount routine is actually done in put_super() */
+       generic_shutdown_super(sb);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/tnc.c linux-2.6.29-rc3.owrt/fs/ubifs/tnc.c
+--- linux-2.6.29.owrt/fs/ubifs/tnc.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/tnc.c       2009-05-10 23:48:29.000000000 +0200
+@@ -443,11 +443,6 @@
+  * This function performs that same function as ubifs_read_node except that
+  * it does not require that there is actually a node present and instead
+  * the return code indicates if a node was read.
+- *
+- * Note, this function does not check CRC of data nodes if @c->no_chk_data_crc
+- * is true (it is controlled by corresponding mount option). However, if
+- * @c->always_chk_crc is true, @c->no_chk_data_crc is ignored and CRC is always
+- * checked.
+  */
+ static int try_read_node(const struct ubifs_info *c, void *buf, int type,
+                        int len, int lnum, int offs)
+@@ -475,8 +470,9 @@
+       if (node_len != len)
+               return 0;
+-      if (type == UBIFS_DATA_NODE && !c->always_chk_crc && c->no_chk_data_crc)
+-              return 1;
++      if (type == UBIFS_DATA_NODE && !c->always_chk_crc)
++              if (c->no_chk_data_crc)
++                      return 0;
+       crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
+       node_crc = le32_to_cpu(ch->crc);
+@@ -1510,7 +1506,7 @@
+  *
+  * Note, if the bulk-read buffer length (@bu->buf_len) is known, this function
+  * makes sure bulk-read nodes fit the buffer. Otherwise, this function prepares
+- * maximum possible amount of nodes for bulk-read.
++ * maxumum possible amount of nodes for bulk-read.
+  */
+ int ubifs_tnc_get_bu_keys(struct ubifs_info *c, struct bu_info *bu)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ubifs/ubifs.h linux-2.6.29-rc3.owrt/fs/ubifs/ubifs.h
+--- linux-2.6.29.owrt/fs/ubifs/ubifs.h 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ubifs/ubifs.h     2009-05-10 23:48:29.000000000 +0200
+@@ -426,9 +426,9 @@
+  * LEB properties flags.
+  *
+  * LPROPS_UNCAT: not categorized
+- * LPROPS_DIRTY: dirty > free, dirty >= @c->dead_wm, not index
++ * LPROPS_DIRTY: dirty > 0, not index
+  * LPROPS_DIRTY_IDX: dirty + free > @c->min_idx_node_sze and index
+- * LPROPS_FREE: free > 0, dirty < @c->dead_wm, not empty, not index
++ * LPROPS_FREE: free > 0, not empty, not index
+  * LPROPS_HEAP_CNT: number of heaps used for storing categorized LEBs
+  * LPROPS_EMPTY: LEB is empty, not taken
+  * LPROPS_FREEABLE: free + dirty == leb_size, not index, not taken
+@@ -961,6 +961,7 @@
+  * @cs_lock: commit state lock
+  * @cmt_wq: wait queue to sleep on if the log is full and a commit is running
+  *
++ * @fast_unmount: do not run journal commit before un-mounting
+  * @big_lpt: flag that LPT is too big to write whole during commit
+  * @no_chk_data_crc: do not check CRCs when reading data nodes (except during
+  *                   recovery)
+@@ -1201,6 +1202,7 @@
+       spinlock_t cs_lock;
+       wait_queue_head_t cmt_wq;
++      unsigned int fast_unmount:1;
+       unsigned int big_lpt:1;
+       unsigned int no_chk_data_crc:1;
+       unsigned int bulk_read:1;
+@@ -1403,13 +1405,13 @@
+ extern spinlock_t ubifs_infos_lock;
+ extern atomic_long_t ubifs_clean_zn_cnt;
+ extern struct kmem_cache *ubifs_inode_slab;
+-extern const struct super_operations ubifs_super_operations;
+-extern const struct address_space_operations ubifs_file_address_operations;
+-extern const struct file_operations ubifs_file_operations;
+-extern const struct inode_operations ubifs_file_inode_operations;
+-extern const struct file_operations ubifs_dir_operations;
+-extern const struct inode_operations ubifs_dir_inode_operations;
+-extern const struct inode_operations ubifs_symlink_inode_operations;
++extern struct super_operations ubifs_super_operations;
++extern struct address_space_operations ubifs_file_address_operations;
++extern struct file_operations ubifs_file_operations;
++extern struct inode_operations ubifs_file_inode_operations;
++extern struct file_operations ubifs_dir_operations;
++extern struct inode_operations ubifs_dir_inode_operations;
++extern struct inode_operations ubifs_symlink_inode_operations;
+ extern struct backing_dev_info ubifs_backing_dev_info;
+ extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
+@@ -1426,7 +1428,7 @@
+ int ubifs_write_node(struct ubifs_info *c, void *node, int len, int lnum,
+                    int offs, int dtype);
+ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
+-                   int offs, int quiet, int must_chk_crc);
++                   int offs, int quiet, int chk_crc);
+ void ubifs_prepare_node(struct ubifs_info *c, void *buf, int len, int pad);
+ void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last);
+ int ubifs_io_init(struct ubifs_info *c);
+@@ -1493,7 +1495,6 @@
+ void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
+                        struct ubifs_budget_req *req);
+ long long ubifs_get_free_space(struct ubifs_info *c);
+-long long ubifs_get_free_space_nolock(struct ubifs_info *c);
+ int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
+ void ubifs_convert_page_budget(struct ubifs_info *c);
+ long long ubifs_reported_space(const struct ubifs_info *c, long long free);
+@@ -1602,7 +1603,6 @@
+ int ubifs_orphan_start_commit(struct ubifs_info *c);
+ int ubifs_orphan_end_commit(struct ubifs_info *c);
+ int ubifs_mount_orphans(struct ubifs_info *c, int unclean, int read_only);
+-int ubifs_clear_orphans(struct ubifs_info *c);
+ /* lpt.c */
+ int ubifs_calc_lpt_geom(struct ubifs_info *c);
+@@ -1646,7 +1646,7 @@
+                                          const struct ubifs_lprops *lp,
+                                          int free, int dirty, int flags,
+                                          int idx_gc_cnt);
+-void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *lst);
++void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *stats);
+ void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops,
+                     int cat);
+ void ubifs_replace_cat(struct ubifs_info *c, struct ubifs_lprops *old_lprops,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/ufs/super.c linux-2.6.29-rc3.owrt/fs/ufs/super.c
+--- linux-2.6.29.owrt/fs/ufs/super.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/ufs/super.c       2009-05-10 23:48:29.000000000 +0200
+@@ -41,7 +41,7 @@
+  * Stefan Reinauer <stepan@home.culture.mipt.ru>
+  *
+  * Module usage counts added on 96/04/29 by
+- * Gertjan van Wingerde <gwingerde@gmail.com>
++ * Gertjan van Wingerde <gertjan@cs.vu.nl>
+  *
+  * Clean swab support on 19970406 by
+  * Francois-Rene Rideau <fare@tunes.org>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_buf.c linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_buf.c
+--- linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_buf.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_buf.c   2009-05-10 23:48:29.000000000 +0200
+@@ -34,12 +34,6 @@
+ #include <linux/backing-dev.h>
+ #include <linux/freezer.h>
+-#include "xfs_sb.h"
+-#include "xfs_inum.h"
+-#include "xfs_ag.h"
+-#include "xfs_dmapi.h"
+-#include "xfs_mount.h"
+-
+ static kmem_zone_t *xfs_buf_zone;
+ STATIC int xfsbufd(void *);
+ STATIC int xfsbufd_wakeup(int, gfp_t);
+@@ -172,75 +166,6 @@
+ }
+ /*
+- *    Mapping of multi-page buffers into contiguous virtual space
+- */
+-
+-typedef struct a_list {
+-      void            *vm_addr;
+-      struct a_list   *next;
+-} a_list_t;
+-
+-static a_list_t               *as_free_head;
+-static int            as_list_len;
+-static DEFINE_SPINLOCK(as_lock);
+-
+-/*
+- *    Try to batch vunmaps because they are costly.
+- */
+-STATIC void
+-free_address(
+-      void            *addr)
+-{
+-      a_list_t        *aentry;
+-
+-#ifdef CONFIG_XEN
+-      /*
+-       * Xen needs to be able to make sure it can get an exclusive
+-       * RO mapping of pages it wants to turn into a pagetable.  If
+-       * a newly allocated page is also still being vmap()ed by xfs,
+-       * it will cause pagetable construction to fail.  This is a
+-       * quick workaround to always eagerly unmap pages so that Xen
+-       * is happy.
+-       */
+-      vunmap(addr);
+-      return;
+-#endif
+-
+-      aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
+-      if (likely(aentry)) {
+-              spin_lock(&as_lock);
+-              aentry->next = as_free_head;
+-              aentry->vm_addr = addr;
+-              as_free_head = aentry;
+-              as_list_len++;
+-              spin_unlock(&as_lock);
+-      } else {
+-              vunmap(addr);
+-      }
+-}
+-
+-STATIC void
+-purge_addresses(void)
+-{
+-      a_list_t        *aentry, *old;
+-
+-      if (as_free_head == NULL)
+-              return;
+-
+-      spin_lock(&as_lock);
+-      aentry = as_free_head;
+-      as_free_head = NULL;
+-      as_list_len = 0;
+-      spin_unlock(&as_lock);
+-
+-      while ((old = aentry) != NULL) {
+-              vunmap(aentry->vm_addr);
+-              aentry = aentry->next;
+-              kfree(old);
+-      }
+-}
+-
+-/*
+  *    Internal xfs_buf_t object manipulation
+  */
+@@ -339,7 +264,7 @@
+               uint            i;
+               if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
+-                      free_address(bp->b_addr - bp->b_offset);
++                       vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
+               for (i = 0; i < bp->b_page_count; i++) {
+                       struct page     *page = bp->b_pages[i];
+@@ -461,10 +386,8 @@
+               bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
+               bp->b_flags |= XBF_MAPPED;
+       } else if (flags & XBF_MAPPED) {
+-              if (as_list_len > 64)
+-                      purge_addresses();
+-              bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
+-                                      VM_MAP, PAGE_KERNEL);
++               bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
++                                       -1, PAGE_KERNEL);
+               if (unlikely(bp->b_addr == NULL))
+                       return -ENOMEM;
+               bp->b_addr += bp->b_offset;
+@@ -1441,12 +1364,10 @@
+ void
+ xfs_free_buftarg(
+-      struct xfs_mount        *mp,
+-      struct xfs_buftarg      *btp)
++      xfs_buftarg_t           *btp)
+ {
+       xfs_flush_buftarg(btp, 1);
+-      if (mp->m_flags & XFS_MOUNT_BARRIER)
+-              xfs_blkdev_issue_flush(btp);
++      xfs_blkdev_issue_flush(btp);
+       xfs_free_bufhash(btp);
+       iput(btp->bt_mapping->host);
+@@ -1751,8 +1672,6 @@
+                       count++;
+               }
+-              if (as_list_len > 0)
+-                      purge_addresses();
+               if (count)
+                       blk_run_address_space(target->bt_mapping);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_buf.h linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_buf.h
+--- linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_buf.h       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_buf.h   2009-05-10 23:48:29.000000000 +0200
+@@ -413,7 +413,7 @@
+  *    Handling of buftargs.
+  */
+ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
+-extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *);
++extern void xfs_free_buftarg(xfs_buftarg_t *);
+ extern void xfs_wait_buftarg(xfs_buftarg_t *);
+ extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
+ extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_super.c linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_super.c
+--- linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_super.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_super.c 2009-05-10 23:48:29.000000000 +0200
+@@ -734,15 +734,15 @@
+ {
+       if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
+               struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
+-              xfs_free_buftarg(mp, mp->m_logdev_targp);
++              xfs_free_buftarg(mp->m_logdev_targp);
+               xfs_blkdev_put(logdev);
+       }
+       if (mp->m_rtdev_targp) {
+               struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
+-              xfs_free_buftarg(mp, mp->m_rtdev_targp);
++              xfs_free_buftarg(mp->m_rtdev_targp);
+               xfs_blkdev_put(rtdev);
+       }
+-      xfs_free_buftarg(mp, mp->m_ddev_targp);
++      xfs_free_buftarg(mp->m_ddev_targp);
+ }
+ /*
+@@ -811,9 +811,9 @@
+  out_free_rtdev_targ:
+       if (mp->m_rtdev_targp)
+-              xfs_free_buftarg(mp, mp->m_rtdev_targp);
++              xfs_free_buftarg(mp->m_rtdev_targp);
+  out_free_ddev_targ:
+-      xfs_free_buftarg(mp, mp->m_ddev_targp);
++      xfs_free_buftarg(mp->m_ddev_targp);
+  out_close_rtdev:
+       if (rtdev)
+               xfs_blkdev_put(rtdev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_sync.c linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_sync.c
+--- linux-2.6.29.owrt/fs/xfs/linux-2.6/xfs_sync.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/linux-2.6/xfs_sync.c  2009-05-10 23:48:29.000000000 +0200
+@@ -371,11 +371,7 @@
+       /* flush inodes and push all remaining buffers out to disk */
+       xfs_quiesce_fs(mp);
+-      /*
+-       * Just warn here till VFS can correctly support
+-       * read-only remount without racing.
+-       */
+-      WARN_ON(atomic_read(&mp->m_active_trans) != 0);
++      ASSERT_ALWAYS(atomic_read(&mp->m_active_trans) == 0);
+       /* Push the superblock and write an unmount record */
+       error = xfs_log_sbcount(mp, 1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/xfs_dfrag.c linux-2.6.29-rc3.owrt/fs/xfs/xfs_dfrag.c
+--- linux-2.6.29.owrt/fs/xfs/xfs_dfrag.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/xfs_dfrag.c   2009-05-10 23:48:29.000000000 +0200
+@@ -55,11 +55,17 @@
+       struct file     *file, *target_file;
+       int             error = 0;
++      sxp = kmem_alloc(sizeof(xfs_swapext_t), KM_MAYFAIL);
++      if (!sxp) {
++              error = XFS_ERROR(ENOMEM);
++              goto out;
++      }
++
+       /* Pull information for the target fd */
+       file = fget((int)sxp->sx_fdtarget);
+       if (!file) {
+               error = XFS_ERROR(EINVAL);
+-              goto out;
++              goto out_free_sxp;
+       }
+       if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND)) {
+@@ -103,6 +109,8 @@
+       fput(target_file);
+  out_put_file:
+       fput(file);
++ out_free_sxp:
++      kmem_free(sxp);
+  out:
+       return error;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/xfs_iget.c linux-2.6.29-rc3.owrt/fs/xfs/xfs_iget.c
+--- linux-2.6.29.owrt/fs/xfs/xfs_iget.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/xfs_iget.c    2009-05-10 23:48:29.000000000 +0200
+@@ -246,6 +246,9 @@
+               goto out_destroy;
+       }
++      if (lock_flags)
++              xfs_ilock(ip, lock_flags);
++
+       /*
+        * Preload the radix tree so we can insert safely under the
+        * write spinlock. Note that we cannot sleep inside the preload
+@@ -253,16 +256,7 @@
+        */
+       if (radix_tree_preload(GFP_KERNEL)) {
+               error = EAGAIN;
+-              goto out_destroy;
+-      }
+-
+-      /*
+-       * Because the inode hasn't been added to the radix-tree yet it can't
+-       * be found by another thread, so we can do the non-sleeping lock here.
+-       */
+-      if (lock_flags) {
+-              if (!xfs_ilock_nowait(ip, lock_flags))
+-                      BUG();
++              goto out_unlock;
+       }
+       mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
+@@ -290,6 +284,7 @@
+ out_preload_end:
+       write_unlock(&pag->pag_ici_lock);
+       radix_tree_preload_end();
++out_unlock:
+       if (lock_flags)
+               xfs_iunlock(ip, lock_flags);
+ out_destroy:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/fs/xfs/xfs_log_recover.c linux-2.6.29-rc3.owrt/fs/xfs/xfs_log_recover.c
+--- linux-2.6.29.owrt/fs/xfs/xfs_log_recover.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/fs/xfs/xfs_log_recover.c     2009-05-10 23:48:29.000000000 +0200
+@@ -70,21 +70,16 @@
+ xfs_buf_t *
+ xlog_get_bp(
+       xlog_t          *log,
+-      int             nbblks)
++      int             num_bblks)
+ {
+-      if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+-              xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+-              XFS_ERROR_REPORT("xlog_get_bp(1)",
+-                               XFS_ERRLEVEL_HIGH, log->l_mp);
+-              return NULL;
+-      }
++      ASSERT(num_bblks > 0);
+       if (log->l_sectbb_log) {
+-              if (nbblks > 1)
+-                      nbblks += XLOG_SECTOR_ROUNDUP_BBCOUNT(log, 1);
+-              nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
++              if (num_bblks > 1)
++                      num_bblks += XLOG_SECTOR_ROUNDUP_BBCOUNT(log, 1);
++              num_bblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, num_bblks);
+       }
+-      return xfs_buf_get_noaddr(BBTOB(nbblks), log->l_mp->m_logdev_targp);
++      return xfs_buf_get_noaddr(BBTOB(num_bblks), log->l_mp->m_logdev_targp);
+ }
+ void
+@@ -107,13 +102,6 @@
+ {
+       int             error;
+-      if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+-              xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+-              XFS_ERROR_REPORT("xlog_bread(1)",
+-                               XFS_ERRLEVEL_HIGH, log->l_mp);
+-              return EFSCORRUPTED;
+-      }
+-
+       if (log->l_sectbb_log) {
+               blk_no = XLOG_SECTOR_ROUNDDOWN_BLKNO(log, blk_no);
+               nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
+@@ -151,13 +139,6 @@
+ {
+       int             error;
+-      if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+-              xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+-              XFS_ERROR_REPORT("xlog_bwrite(1)",
+-                               XFS_ERRLEVEL_HIGH, log->l_mp);
+-              return EFSCORRUPTED;
+-      }
+-
+       if (log->l_sectbb_log) {
+               blk_no = XLOG_SECTOR_ROUNDDOWN_BLKNO(log, blk_no);
+               nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
+@@ -1455,19 +1436,10 @@
+       item = item->ri_prev;
+       if (item->ri_total == 0) {              /* first region to be added */
+-              if (in_f->ilf_size == 0 ||
+-                  in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
+-                      xlog_warn(
+-      "XFS: bad number of regions (%d) in inode log format",
+-                                in_f->ilf_size);
+-                      ASSERT(0);
+-                      return XFS_ERROR(EIO);
+-              }
+-
+-              item->ri_total = in_f->ilf_size;
+-              item->ri_buf =
+-                      kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
+-                                  KM_SLEEP);
++              item->ri_total  = in_f->ilf_size;
++              ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM);
++              item->ri_buf = kmem_zalloc((item->ri_total *
++                                          sizeof(xfs_log_iovec_t)), KM_SLEEP);
+       }
+       ASSERT(item->ri_total > item->ri_cnt);
+       /* Description region is ri_buf[0] */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/acpi/pdc_intel.h linux-2.6.29-rc3.owrt/include/acpi/pdc_intel.h
+--- linux-2.6.29.owrt/include/acpi/pdc_intel.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/acpi/pdc_intel.h     2009-05-10 23:48:29.000000000 +0200
+@@ -14,7 +14,6 @@
+ #define ACPI_PDC_SMP_T_SWCOORD                (0x0080)
+ #define ACPI_PDC_C_C1_FFH             (0x0100)
+ #define ACPI_PDC_C_C2C3_FFH           (0x0200)
+-#define ACPI_PDC_SMP_P_HWCOORD                (0x0800)
+ #define ACPI_PDC_EST_CAPABILITY_SMP   (ACPI_PDC_SMP_C1PT | \
+                                        ACPI_PDC_C_C1_HALT | \
+@@ -23,7 +22,6 @@
+ #define ACPI_PDC_EST_CAPABILITY_SWSMP (ACPI_PDC_SMP_C1PT | \
+                                        ACPI_PDC_C_C1_HALT | \
+                                        ACPI_PDC_SMP_P_SWCOORD | \
+-                                       ACPI_PDC_SMP_P_HWCOORD | \
+                                        ACPI_PDC_P_FFH)
+ #define ACPI_PDC_C_CAPABILITY_SMP     (ACPI_PDC_SMP_C2C3  | \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/asm-frv/pgtable.h linux-2.6.29-rc3.owrt/include/asm-frv/pgtable.h
+--- linux-2.6.29.owrt/include/asm-frv/pgtable.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/asm-frv/pgtable.h    2009-05-10 23:48:29.000000000 +0200
+@@ -478,7 +478,7 @@
+ #define __swp_type(x)                 (((x).val >> 2) & 0x1f)
+ #define __swp_offset(x)                       ((x).val >> 8)
+ #define __swp_entry(type, offset)     ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+-#define __pte_to_swp_entry(_pte)      ((swp_entry_t) { (_pte).pte })
++#define __pte_to_swp_entry(pte)               ((swp_entry_t) { (pte).pte })
+ #define __swp_entry_to_pte(x)         ((pte_t) { (x).val })
+ static inline int pte_file(pte_t pte)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/crypto/hash.h linux-2.6.29-rc3.owrt/include/crypto/hash.h
+--- linux-2.6.29.owrt/include/crypto/hash.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/crypto/hash.h        2009-05-10 23:48:29.000000000 +0200
+@@ -222,7 +222,7 @@
+ static inline void crypto_free_shash(struct crypto_shash *tfm)
+ {
+-      crypto_destroy_tfm(tfm, crypto_shash_tfm(tfm));
++      crypto_free_tfm(crypto_shash_tfm(tfm));
+ }
+ static inline unsigned int crypto_shash_alignmask(
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/drm/drm_crtc.h linux-2.6.29-rc3.owrt/include/drm/drm_crtc.h
+--- linux-2.6.29.owrt/include/drm/drm_crtc.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/drm/drm_crtc.h       2009-05-10 23:48:29.000000000 +0200
+@@ -609,7 +609,7 @@
+ extern char *drm_get_dvi_i_select_name(int val);
+ extern char *drm_get_tv_subconnector_name(int val);
+ extern char *drm_get_tv_select_name(int val);
+-extern void drm_fb_release(struct drm_file *file_priv);
++extern void drm_fb_release(struct file *filp);
+ extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
+ extern struct edid *drm_get_edid(struct drm_connector *connector,
+                                struct i2c_adapter *adapter);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/drm/drm_crtc_helper.h linux-2.6.29-rc3.owrt/include/drm/drm_crtc_helper.h
+--- linux-2.6.29.owrt/include/drm/drm_crtc_helper.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/drm/drm_crtc_helper.h        2009-05-10 23:48:29.000000000 +0200
+@@ -54,13 +54,13 @@
+                          struct drm_display_mode *mode,
+                          struct drm_display_mode *adjusted_mode);
+       /* Actually set the mode */
+-      int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+-                      struct drm_display_mode *adjusted_mode, int x, int y,
+-                      struct drm_framebuffer *old_fb);
++      void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
++                       struct drm_display_mode *adjusted_mode, int x, int y,
++                       struct drm_framebuffer *old_fb);
+       /* Move the crtc on the current fb to the given position *optional* */
+-      int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
+-                           struct drm_framebuffer *old_fb);
++      void (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
++                            struct drm_framebuffer *old_fb);
+ };
+ struct drm_encoder_helper_funcs {
+@@ -76,7 +76,6 @@
+       void (*mode_set)(struct drm_encoder *encoder,
+                        struct drm_display_mode *mode,
+                        struct drm_display_mode *adjusted_mode);
+-      struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
+       /* detect for DAC style encoders */
+       enum drm_connector_status (*detect)(struct drm_encoder *encoder,
+                                           struct drm_connector *connector);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/drm/drm_edid.h linux-2.6.29-rc3.owrt/include/drm/drm_edid.h
+--- linux-2.6.29.owrt/include/drm/drm_edid.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/drm/drm_edid.h       2009-05-10 23:48:29.000000000 +0200
+@@ -58,10 +58,10 @@
+       u8 hsync_pulse_width_lo;
+       u8 vsync_pulse_width_lo:4;
+       u8 vsync_offset_lo:4;
+-      u8 vsync_pulse_width_hi:2;
+-      u8 vsync_offset_hi:2;
+       u8 hsync_pulse_width_hi:2;
+       u8 hsync_offset_hi:2;
++      u8 vsync_pulse_width_hi:2;
++      u8 vsync_offset_hi:2;
+       u8 width_mm_lo;
+       u8 height_mm_lo;
+       u8 height_mm_hi:4;
+@@ -69,8 +69,8 @@
+       u8 hborder;
+       u8 vborder;
+       u8 unknown0:1;
+-      u8 hsync_positive:1;
+       u8 vsync_positive:1;
++      u8 hsync_positive:1;
+       u8 separate_sync:2;
+       u8 stereo:1;
+       u8 unknown6:1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/drm/drmP.h linux-2.6.29-rc3.owrt/include/drm/drmP.h
+--- linux-2.6.29.owrt/include/drm/drmP.h       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/drm/drmP.h   2009-05-10 23:48:29.000000000 +0200
+@@ -1321,8 +1321,6 @@
+ struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
+                                           size_t size);
+ void drm_gem_object_handle_free(struct kref *kref);
+-void drm_gem_vm_open(struct vm_area_struct *vma);
+-void drm_gem_vm_close(struct vm_area_struct *vma);
+ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+ static inline void
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/drm/i915_drm.h linux-2.6.29-rc3.owrt/include/drm/i915_drm.h
+--- linux-2.6.29.owrt/include/drm/i915_drm.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/drm/i915_drm.h       2009-05-10 23:48:29.000000000 +0200
+@@ -261,7 +261,6 @@
+ #define I915_PARAM_LAST_DISPATCH         3
+ #define I915_PARAM_CHIPSET_ID            4
+ #define I915_PARAM_HAS_GEM               5
+-#define I915_PARAM_NUM_FENCES_AVAIL      6
+ typedef struct drm_i915_getparam {
+       int param;
+@@ -273,7 +272,6 @@
+ #define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1
+ #define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2
+ #define I915_SETPARAM_ALLOW_BATCHBUFFER                   3
+-#define I915_SETPARAM_NUM_USED_FENCES                     4
+ typedef struct drm_i915_setparam {
+       int param;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/aio_abi.h linux-2.6.29-rc3.owrt/include/linux/aio_abi.h
+--- linux-2.6.29.owrt/include/linux/aio_abi.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/aio_abi.h      2009-05-10 23:48:29.000000000 +0200
+@@ -27,7 +27,6 @@
+ #ifndef __LINUX__AIO_ABI_H
+ #define __LINUX__AIO_ABI_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ typedef unsigned long aio_context_t;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/async.h linux-2.6.29-rc3.owrt/include/linux/async.h
+--- linux-2.6.29.owrt/include/linux/async.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/async.h        2009-05-10 23:48:29.000000000 +0200
+@@ -17,11 +17,9 @@
+ typedef void (async_func_ptr) (void *data, async_cookie_t cookie);
+ extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data);
+-extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data,
+-                                          struct list_head *list);
++extern async_cookie_t async_schedule_special(async_func_ptr *ptr, void *data, struct list_head *list);
+ extern void async_synchronize_full(void);
+-extern void async_synchronize_full_domain(struct list_head *list);
++extern void async_synchronize_full_special(struct list_head *list);
+ extern void async_synchronize_cookie(async_cookie_t cookie);
+-extern void async_synchronize_cookie_domain(async_cookie_t cookie,
+-                                          struct list_head *list);
++extern void async_synchronize_cookie_special(async_cookie_t cookie, struct list_head *list);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ata.h linux-2.6.29-rc3.owrt/include/linux/ata.h
+--- linux-2.6.29.owrt/include/linux/ata.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ata.h  2009-05-10 23:48:29.000000000 +0200
+@@ -89,8 +89,6 @@
+       ATA_ID_DLF              = 128,
+       ATA_ID_CSFO             = 129,
+       ATA_ID_CFA_POWER        = 160,
+-      ATA_ID_CFA_KEY_MGMT     = 162,
+-      ATA_ID_CFA_MODES        = 163,
+       ATA_ID_ROT_SPEED        = 217,
+       ATA_ID_PIO4             = (1 << 1),
+@@ -733,17 +731,12 @@
+ static inline int ata_id_is_cfa(const u16 *id)
+ {
+-      if (id[ATA_ID_CONFIG] == 0x848A)        /* Traditional CF */
++      if (id[ATA_ID_CONFIG] == 0x848A)        /* Standard CF */
+               return 1;
+-      /*
+-       * CF specs don't require specific value in the word 0 anymore and yet
+-       * they forbid to report the ATA version in the word 80 and require the
+-       * CFA feature set support to be indicated in the word 83 in this case.
+-       * Unfortunately, some cards only follow either of this requirements,
+-       * and while those that don't indicate CFA feature support need some
+-       * sort of quirk list, it seems impractical for the ones that do...
+-       */
+-      if ((id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004)
++      /* Could be CF hiding as standard ATA */
++      if (ata_id_major_version(id) >= 3 &&
++          id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
++         (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
+               return 1;
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/atalk.h linux-2.6.29-rc3.owrt/include/linux/atalk.h
+--- linux-2.6.29.owrt/include/linux/atalk.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/atalk.h        2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_ATALK_H__
+ #define __LINUX_ATALK_H__
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/atmbr2684.h linux-2.6.29-rc3.owrt/include/linux/atmbr2684.h
+--- linux-2.6.29.owrt/include/linux/atmbr2684.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/atmbr2684.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _LINUX_ATMBR2684_H
+ #define _LINUX_ATMBR2684_H
+-#include <linux/types.h>
+ #include <linux/atm.h>
+ #include <linux/if.h>         /* For IFNAMSIZ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/auto_fs4.h linux-2.6.29-rc3.owrt/include/linux/auto_fs4.h
+--- linux-2.6.29.owrt/include/linux/auto_fs4.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/auto_fs4.h     2009-05-10 23:48:29.000000000 +0200
+@@ -12,7 +12,6 @@
+ #define _LINUX_AUTO_FS4_H
+ /* Include common v3 definitions */
+-#include <linux/types.h>
+ #include <linux/auto_fs.h>
+ /* autofs v4 definitions */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/bfs_fs.h linux-2.6.29-rc3.owrt/include/linux/bfs_fs.h
+--- linux-2.6.29.owrt/include/linux/bfs_fs.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/bfs_fs.h       2009-05-10 23:48:29.000000000 +0200
+@@ -6,8 +6,6 @@
+ #ifndef _LINUX_BFS_FS_H
+ #define _LINUX_BFS_FS_H
+-#include <linux/types.h>
+-
+ #define BFS_BSIZE_BITS                9
+ #define BFS_BSIZE             (1<<BFS_BSIZE_BITS)
+@@ -19,6 +17,7 @@
+ #define BFS_VDIR 2L
+ #define BFS_VREG 1L
++
+ /* BFS inode layout on disk */
+ struct bfs_inode {
+       __le16 i_ino;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/bio.h linux-2.6.29-rc3.owrt/include/linux/bio.h
+--- linux-2.6.29.owrt/include/linux/bio.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/bio.h  2009-05-10 23:48:29.000000000 +0200
+@@ -144,7 +144,7 @@
+  * bit 1 -- rw-ahead when set
+  * bit 2 -- barrier
+  *    Insert a serialization point in the IO queue, forcing previously
+- *    submitted IO to be completed before this one is issued.
++ *    submitted IO to be completed before this oen is issued.
+  * bit 3 -- synchronous I/O hint: the block layer will unplug immediately
+  *    Note that this does NOT indicate that the IO itself is sync, just
+  *    that the block layer will not postpone issue of this IO by plugging.
+@@ -163,31 +163,12 @@
+ #define BIO_RW                0       /* Must match RW in req flags (blkdev.h) */
+ #define BIO_RW_AHEAD  1       /* Must match FAILFAST in req flags */
+ #define BIO_RW_BARRIER        2
+-#define BIO_RW_SYNCIO 3
+-#define BIO_RW_UNPLUG 4
+-#define BIO_RW_META   5
+-#define BIO_RW_DISCARD        6
+-#define BIO_RW_FAILFAST_DEV           7
+-#define BIO_RW_FAILFAST_TRANSPORT     8
+-#define BIO_RW_FAILFAST_DRIVER                9
+-
+-#define bio_rw_flagged(bio, flag)     ((bio)->bi_rw & (1 << (flag)))
+-
+-/*
+- * Old defines, these should eventually be replaced by direct usage of
+- * bio_rw_flagged()
+- */
+-#define bio_barrier(bio)      bio_rw_flagged(bio, BIO_RW_BARRIER)
+-#define bio_sync(bio)         bio_rw_flagged(bio, BIO_RW_SYNCIO)
+-#define bio_unplug(bio)               bio_rw_flagged(bio, BIO_RW_UNPLUG)
+-#define bio_failfast_dev(bio) bio_rw_flagged(bio, BIO_RW_FAILFAST_DEV)
+-#define bio_failfast_transport(bio)   \
+-              bio_rw_flagged(bio, BIO_RW_FAILFAST_TRANSPORT)
+-#define bio_failfast_driver(bio)      \
+-              bio_rw_flagged(bio, BIO_RW_FAILFAST_DRIVER)
+-#define bio_rw_ahead(bio)     bio_rw_flagged(bio, BIO_RW_AHEAD)
+-#define bio_rw_meta(bio)      bio_rw_flagged(bio, BIO_RW_META)
+-#define bio_discard(bio)      bio_rw_flagged(bio, BIO_RW_DISCARD)
++#define BIO_RW_SYNC   3
++#define BIO_RW_META   4
++#define BIO_RW_DISCARD        5
++#define BIO_RW_FAILFAST_DEV           6
++#define BIO_RW_FAILFAST_TRANSPORT     7
++#define BIO_RW_FAILFAST_DRIVER                8
+ /*
+  * upper 16 bits of bi_rw define the io priority of this bio
+@@ -212,6 +193,15 @@
+ #define bio_offset(bio)               bio_iovec((bio))->bv_offset
+ #define bio_segments(bio)     ((bio)->bi_vcnt - (bio)->bi_idx)
+ #define bio_sectors(bio)      ((bio)->bi_size >> 9)
++#define bio_barrier(bio)      ((bio)->bi_rw & (1 << BIO_RW_BARRIER))
++#define bio_sync(bio)         ((bio)->bi_rw & (1 << BIO_RW_SYNC))
++#define bio_failfast_dev(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DEV))
++#define bio_failfast_transport(bio)   \
++      ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT))
++#define bio_failfast_driver(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DRIVER))
++#define bio_rw_ahead(bio)     ((bio)->bi_rw & (1 << BIO_RW_AHEAD))
++#define bio_rw_meta(bio)      ((bio)->bi_rw & (1 << BIO_RW_META))
++#define bio_discard(bio)      ((bio)->bi_rw & (1 << BIO_RW_DISCARD))
+ #define bio_empty_barrier(bio)        (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
+ static inline unsigned int bio_cur_sectors(struct bio *bio)
+@@ -322,6 +312,7 @@
+       void                    *bip_buf;       /* generated integrity data */
+       bio_end_io_t            *bip_end_io;    /* saved I/O completion fn */
++      int                     bip_error;      /* saved I/O error */
+       unsigned int            bip_size;
+       unsigned short          bip_pool;       /* pool the ivec came from */
+@@ -449,13 +440,12 @@
+ #ifdef CONFIG_HIGHMEM
+ /*
+- * remember never ever reenable interrupts between a bvec_kmap_irq and
+- * bvec_kunmap_irq!
++ * remember to add offset! and never ever reenable interrupts between a
++ * bvec_kmap_irq and bvec_kunmap_irq!!
+  *
+  * This function MUST be inlined - it plays with the CPU interrupt flags.
+  */
+-static __always_inline char *bvec_kmap_irq(struct bio_vec *bvec,
+-              unsigned long *flags)
++static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
+ {
+       unsigned long addr;
+@@ -471,8 +461,7 @@
+       return (char *) addr + bvec->bv_offset;
+ }
+-static __always_inline void bvec_kunmap_irq(char *buffer,
+-              unsigned long *flags)
++static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
+ {
+       unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
+@@ -531,7 +520,7 @@
+ extern void bio_integrity_advance(struct bio *, unsigned int);
+ extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
+ extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
+-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
++extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+ extern int bioset_integrity_create(struct bio_set *, int);
+ extern void bioset_integrity_free(struct bio_set *);
+ extern void bio_integrity_init_slab(void);
+@@ -542,7 +531,7 @@
+ #define bioset_integrity_create(a, b) (0)
+ #define bio_integrity_prep(a)         (0)
+ #define bio_integrity_enabled(a)      (0)
+-#define bio_integrity_clone(a, b, c,d )       (0)
++#define bio_integrity_clone(a, b, c)  (0)
+ #define bioset_integrity_free(a)      do { } while (0)
+ #define bio_integrity_free(a, b)      do { } while (0)
+ #define bio_integrity_endio(a, b)     do { } while (0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/blkdev.h linux-2.6.29-rc3.owrt/include/linux/blkdev.h
+--- linux-2.6.29.owrt/include/linux/blkdev.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/blkdev.h       2009-05-10 23:48:29.000000000 +0200
+@@ -108,7 +108,6 @@
+       __REQ_RW_META,          /* metadata io request */
+       __REQ_COPY_USER,        /* contains copies of user pages */
+       __REQ_INTEGRITY,        /* integrity metadata has been remapped */
+-      __REQ_UNPLUG,           /* unplug queue on submission */
+       __REQ_NR_BITS,          /* stops here */
+ };
+@@ -135,7 +134,6 @@
+ #define REQ_RW_META   (1 << __REQ_RW_META)
+ #define REQ_COPY_USER (1 << __REQ_COPY_USER)
+ #define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
+-#define REQ_UNPLUG    (1 << __REQ_UNPLUG)
+ #define BLK_MAX_CDB   16
+@@ -451,11 +449,6 @@
+ #define QUEUE_FLAG_STACKABLE   13     /* supports request stacking */
+ #define QUEUE_FLAG_NONROT      14     /* non-rotational device (SSD) */
+ #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
+-#define QUEUE_FLAG_IO_STAT     15     /* do IO stats */
+-
+-#define QUEUE_FLAG_DEFAULT    ((1 << QUEUE_FLAG_IO_STAT) |            \
+-                               (1 << QUEUE_FLAG_CLUSTER) |            \
+-                               (1 << QUEUE_FLAG_STACKABLE))
+ static inline int queue_is_locked(struct request_queue *q)
+ {
+@@ -572,7 +565,6 @@
+ #define blk_queue_stopped(q)  test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
+ #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
+ #define blk_queue_nonrot(q)   test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
+-#define blk_queue_io_stat(q)  test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
+ #define blk_queue_flushing(q) ((q)->ordseq)
+ #define blk_queue_stackable(q)        \
+       test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
+@@ -708,8 +700,6 @@
+ };
+ /* This should not be used directly - use rq_for_each_segment */
+-#define for_each_bio(_bio)            \
+-      for (; _bio; _bio = _bio->bi_next)
+ #define __rq_for_each_bio(_bio, rq)   \
+       if ((rq->bio))                  \
+               for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/blktrace_api.h linux-2.6.29-rc3.owrt/include/linux/blktrace_api.h
+--- linux-2.6.29.owrt/include/linux/blktrace_api.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/blktrace_api.h 2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef BLKTRACE_H
+ #define BLKTRACE_H
+-#include <linux/types.h>
+ #ifdef __KERNEL__
+ #include <linux/blkdev.h>
+ #include <linux/relay.h>
+@@ -15,7 +14,6 @@
+       BLK_TC_WRITE    = 1 << 1,       /* writes */
+       BLK_TC_BARRIER  = 1 << 2,       /* barrier */
+       BLK_TC_SYNC     = 1 << 3,       /* sync IO */
+-      BLK_TC_SYNCIO   = BLK_TC_SYNC,
+       BLK_TC_QUEUE    = 1 << 4,       /* queueing/merging */
+       BLK_TC_REQUEUE  = 1 << 5,       /* requeueing */
+       BLK_TC_ISSUE    = 1 << 6,       /* issue */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/can/bcm.h linux-2.6.29-rc3.owrt/include/linux/can/bcm.h
+--- linux-2.6.29.owrt/include/linux/can/bcm.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/can/bcm.h      2009-05-10 23:48:29.000000000 +0200
+@@ -14,8 +14,6 @@
+ #ifndef CAN_BCM_H
+ #define CAN_BCM_H
+-#include <linux/types.h>
+-
+ /**
+  * struct bcm_msg_head - head of messages to/from the broadcast manager
+  * @opcode:    opcode, see enum below.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/capability.h linux-2.6.29-rc3.owrt/include/linux/capability.h
+--- linux-2.6.29.owrt/include/linux/capability.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/capability.h   2009-05-10 23:48:29.000000000 +0200
+@@ -69,6 +69,10 @@
+ #define VFS_CAP_U32             VFS_CAP_U32_2
+ #define VFS_CAP_REVISION      VFS_CAP_REVISION_2
++#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
++extern int file_caps_enabled;
++#endif
++
+ struct vfs_cap_data {
+       __le32 magic_etc;            /* Little endian */
+       struct {
+@@ -92,10 +96,6 @@
+ #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+ #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
+-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
+-extern int file_caps_enabled;
+-#endif
+-
+ typedef struct kernel_cap_struct {
+       __u32 cap[_KERNEL_CAPABILITY_U32S];
+ } kernel_cap_t;
+@@ -393,10 +393,8 @@
+ # define CAP_FULL_SET     ((kernel_cap_t){{ ~0, ~0 }})
+ # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }})
+ # define CAP_FS_SET       ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } })
+-# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+-                                          | CAP_TO_MASK(CAP_SYS_RESOURCE) \
+-                                          | CAP_TO_MASK(CAP_MKNOD), \
+-                                          CAP_FS_MASK_B1 } })
++# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
++                                      CAP_FS_MASK_B1 } })
+ #endif /* _KERNEL_CAPABILITY_U32S != 2 */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/cdrom.h linux-2.6.29-rc3.owrt/include/linux/cdrom.h
+--- linux-2.6.29.owrt/include/linux/cdrom.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/cdrom.h        2009-05-10 23:48:29.000000000 +0200
+@@ -11,7 +11,6 @@
+ #ifndef       _LINUX_CDROM_H
+ #define       _LINUX_CDROM_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ /*******************************************************
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/cgroup.h linux-2.6.29-rc3.owrt/include/linux/cgroup.h
+--- linux-2.6.29.owrt/include/linux/cgroup.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/cgroup.h       2009-05-10 23:48:29.000000000 +0200
+@@ -99,7 +99,6 @@
+       while (!atomic_inc_not_zero(&css->refcnt)) {
+               if (test_bit(CSS_REMOVED, &css->flags))
+                       return false;
+-              cpu_relax();
+       }
+       return true;
+ }
+@@ -378,7 +377,6 @@
+        * - initiating hotplug events
+        */
+       struct mutex hierarchy_mutex;
+-      struct lock_class_key subsys_key;
+       /*
+        * Link to parent, and list entry in parent's children.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/cgroupstats.h linux-2.6.29-rc3.owrt/include/linux/cgroupstats.h
+--- linux-2.6.29.owrt/include/linux/cgroupstats.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/cgroupstats.h  2009-05-10 23:48:29.000000000 +0200
+@@ -15,7 +15,6 @@
+ #ifndef _LINUX_CGROUPSTATS_H
+ #define _LINUX_CGROUPSTATS_H
+-#include <linux/types.h>
+ #include <linux/taskstats.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/clockchips.h linux-2.6.29-rc3.owrt/include/linux/clockchips.h
+--- linux-2.6.29.owrt/include/linux/clockchips.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/clockchips.h   2009-05-10 23:48:29.000000000 +0200
+@@ -36,7 +36,6 @@
+       CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
+       CLOCK_EVT_NOTIFY_SUSPEND,
+       CLOCK_EVT_NOTIFY_RESUME,
+-      CLOCK_EVT_NOTIFY_CPU_DYING,
+       CLOCK_EVT_NOTIFY_CPU_DEAD,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/compiler-gcc.h linux-2.6.29-rc3.owrt/include/linux/compiler-gcc.h
+--- linux-2.6.29.owrt/include/linux/compiler-gcc.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/compiler-gcc.h 2009-05-10 23:48:29.000000000 +0200
+@@ -52,15 +52,7 @@
+ #define __deprecated                  __attribute__((deprecated))
+ #define __packed                      __attribute__((packed))
+ #define __weak                                __attribute__((weak))
+-
+-/*
+- * it doesn't make sense on ARM (currently the only user of __naked) to trace
+- * naked functions because then mcount is called without stack and frame pointer
+- * being set up and there is no chance to restore the lr register to the value
+- * before mcount was called.
+- */
+-#define __naked                               __attribute__((naked)) notrace
+-
++#define __naked                               __attribute__((naked))
+ #define __noreturn                    __attribute__((noreturn))
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/cpufreq.h linux-2.6.29-rc3.owrt/include/linux/cpufreq.h
+--- linux-2.6.29.owrt/include/linux/cpufreq.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/cpufreq.h      2009-05-10 23:48:29.000000000 +0200
+@@ -234,6 +234,7 @@
+       int     (*suspend)      (struct cpufreq_policy *policy, pm_message_t pmsg);
+       int     (*resume)       (struct cpufreq_policy *policy);
+       struct freq_attr        **attr;
++      bool                    hide_interface;
+ };
+ /* flags */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/crypto.h linux-2.6.29-rc3.owrt/include/linux/crypto.h
+--- linux-2.6.29.owrt/include/linux/crypto.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/crypto.h       2009-05-10 23:48:29.000000000 +0200
+@@ -552,12 +552,7 @@
+                                   const struct crypto_type *frontend,
+                                   u32 type, u32 mask);
+ struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask);
+-void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm);
+-
+-static inline void crypto_free_tfm(struct crypto_tfm *tfm)
+-{
+-      return crypto_destroy_tfm(tfm, tfm);
+-}
++void crypto_free_tfm(struct crypto_tfm *tfm);
+ int alg_test(const char *driver, const char *alg, u32 type, u32 mask);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dca.h linux-2.6.29-rc3.owrt/include/linux/dca.h
+--- linux-2.6.29.owrt/include/linux/dca.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dca.h  2009-05-10 23:48:29.000000000 +0200
+@@ -1,23 +1,3 @@
+-/*
+- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+- * more details.
+- *
+- * You should have received a copy of the GNU General Public License along with
+- * this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- *
+- * The full GNU General Public License is included in this distribution in the
+- * file called COPYING.
+- */
+ #ifndef DCA_H
+ #define DCA_H
+ /* DCA Provider API */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dcbnl.h linux-2.6.29-rc3.owrt/include/linux/dcbnl.h
+--- linux-2.6.29.owrt/include/linux/dcbnl.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dcbnl.h        2009-05-10 23:48:29.000000000 +0200
+@@ -20,12 +20,10 @@
+ #ifndef __LINUX_DCBNL_H__
+ #define __LINUX_DCBNL_H__
+-#include <linux/types.h>
+-
+ #define DCB_PROTO_VERSION 1
+ struct dcbmsg {
+-      __u8               dcb_family;
++      unsigned char      dcb_family;
+       __u8               cmd;
+       __u16              dcb_pad;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/device.h linux-2.6.29-rc3.owrt/include/linux/device.h
+--- linux-2.6.29.owrt/include/linux/device.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/device.h       2009-05-10 23:48:29.000000000 +0200
+@@ -147,8 +147,6 @@
+ extern struct device_driver *driver_find(const char *name,
+                                        struct bus_type *bus);
+ extern int driver_probe_done(void);
+-extern int wait_for_device_probe(void);
+-
+ /* sysfs interface for exporting driver attributes */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dlm_plock.h linux-2.6.29-rc3.owrt/include/linux/dlm_plock.h
+--- linux-2.6.29.owrt/include/linux/dlm_plock.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dlm_plock.h    2009-05-10 23:48:29.000000000 +0200
+@@ -9,8 +9,6 @@
+ #ifndef __DLM_PLOCK_DOT_H__
+ #define __DLM_PLOCK_DOT_H__
+-#include <linux/types.h>
+-
+ #define DLM_PLOCK_MISC_NAME           "dlm_plock"
+ #define DLM_PLOCK_VERSION_MAJOR       1
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dmaengine.h linux-2.6.29-rc3.owrt/include/linux/dmaengine.h
+--- linux-2.6.29.owrt/include/linux/dmaengine.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dmaengine.h    2009-05-10 23:48:29.000000000 +0200
+@@ -97,6 +97,7 @@
+ /**
+  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
++ * @refcount: local_t used for open-coded "bigref" counting
+  * @memcpy_count: transaction counter
+  * @bytes_transferred: byte counter
+  */
+@@ -113,11 +114,13 @@
+  * @cookie: last cookie value returned to client
+  * @chan_id: channel ID for sysfs
+  * @dev: class device for sysfs
++ * @refcount: kref, used in "bigref" slow-mode
++ * @slow_ref: indicates that the DMA channel is free
++ * @rcu: the DMA channel's RCU head
+  * @device_node: used to add this to the device chan list
+  * @local: per-cpu pointer to a struct dma_chan_percpu
+  * @client-count: how many clients are using this channel
+  * @table_count: number of appearances in the mem-to-mem allocation table
+- * @private: private data for certain client-channel associations
+  */
+ struct dma_chan {
+       struct dma_device *device;
+@@ -131,7 +134,6 @@
+       struct dma_chan_percpu *local;
+       int client_count;
+       int table_count;
+-      void *private;
+ };
+ /**
+@@ -209,6 +211,8 @@
+  * @global_node: list_head for global dma_device_list
+  * @cap_mask: one or more dma_capability flags
+  * @max_xor: maximum number of xor sources, 0 if no capability
++ * @refcount: reference count
++ * @done: IO completion struct
+  * @dev_id: unique device ID
+  * @dev: struct device reference for dma mapping api
+  * @device_alloc_chan_resources: allocate resources and return the
+@@ -221,7 +225,6 @@
+  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
+  * @device_prep_slave_sg: prepares a slave dma operation
+  * @device_terminate_all: terminate all pending operations
+- * @device_is_tx_complete: poll for transaction completion
+  * @device_issue_pending: push pending transactions to hardware
+  */
+ struct dma_device {
+@@ -279,18 +282,6 @@
+ }
+ #endif
+-#ifdef CONFIG_NET_DMA
+-#define net_dmaengine_get()   dmaengine_get()
+-#define net_dmaengine_put()   dmaengine_put()
+-#else
+-static inline void net_dmaengine_get(void)
+-{
+-}
+-static inline void net_dmaengine_put(void)
+-{
+-}
+-#endif
+-
+ dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
+       void *dest, void *src, size_t len);
+ dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dn.h linux-2.6.29-rc3.owrt/include/linux/dn.h
+--- linux-2.6.29.owrt/include/linux/dn.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dn.h   2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _LINUX_DN_H
+ #define _LINUX_DN_H
+-#include <linux/types.h>
+-
+ /*
+       DECnet Data Structures and Constants
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dvb/audio.h linux-2.6.29-rc3.owrt/include/linux/dvb/audio.h
+--- linux-2.6.29.owrt/include/linux/dvb/audio.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dvb/audio.h    2009-05-10 23:48:29.000000000 +0200
+@@ -24,7 +24,12 @@
+ #ifndef _DVBAUDIO_H_
+ #define _DVBAUDIO_H_
++#ifdef __KERNEL__
+ #include <linux/types.h>
++#else
++#include <stdint.h>
++#endif
++
+ typedef enum {
+       AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dvb/dmx.h linux-2.6.29-rc3.owrt/include/linux/dvb/dmx.h
+--- linux-2.6.29.owrt/include/linux/dvb/dmx.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dvb/dmx.h      2009-05-10 23:48:29.000000000 +0200
+@@ -24,7 +24,7 @@
+ #ifndef _DVBDMX_H_
+ #define _DVBDMX_H_
+-#include <linux/types.h>
++#include <asm/types.h>
+ #ifdef __KERNEL__
+ #include <linux/time.h>
+ #else
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dvb/frontend.h linux-2.6.29-rc3.owrt/include/linux/dvb/frontend.h
+--- linux-2.6.29.owrt/include/linux/dvb/frontend.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dvb/frontend.h 2009-05-10 23:48:29.000000000 +0200
+@@ -26,7 +26,8 @@
+ #ifndef _DVBFRONTEND_H_
+ #define _DVBFRONTEND_H_
+-#include <linux/types.h>
++#include <asm/types.h>
++
+ typedef enum fe_type {
+       FE_QPSK,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dvb/net.h linux-2.6.29-rc3.owrt/include/linux/dvb/net.h
+--- linux-2.6.29.owrt/include/linux/dvb/net.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dvb/net.h      2009-05-10 23:48:29.000000000 +0200
+@@ -24,7 +24,8 @@
+ #ifndef _DVBNET_H_
+ #define _DVBNET_H_
+-#include <linux/types.h>
++#include <asm/types.h>
++
+ struct dvb_net_if {
+       __u16 pid;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/dvb/video.h linux-2.6.29-rc3.owrt/include/linux/dvb/video.h
+--- linux-2.6.29.owrt/include/linux/dvb/video.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/dvb/video.h    2009-05-10 23:48:29.000000000 +0200
+@@ -24,14 +24,17 @@
+ #ifndef _DVBVIDEO_H_
+ #define _DVBVIDEO_H_
+-#include <linux/types.h>
+-#ifdef __KERNEL__
+ #include <linux/compiler.h>
++
++#ifdef __KERNEL__
++#include <linux/types.h>
+ #else
++#include <asm/types.h>
+ #include <stdint.h>
+ #include <time.h>
+ #endif
++
+ typedef enum {
+       VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+       VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/edd.h linux-2.6.29-rc3.owrt/include/linux/edd.h
+--- linux-2.6.29.owrt/include/linux/edd.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/edd.h  2009-05-10 23:48:29.000000000 +0200
+@@ -30,8 +30,6 @@
+ #ifndef _LINUX_EDD_H
+ #define _LINUX_EDD_H
+-#include <linux/types.h>
+-
+ #define EDDNR 0x1e9           /* addr of number of edd_info structs at EDDBUF
+                                  in boot_params - treat this as 1 byte  */
+ #define EDDBUF        0xd00           /* addr of edd_info structs in boot_params */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/efs_fs_sb.h linux-2.6.29-rc3.owrt/include/linux/efs_fs_sb.h
+--- linux-2.6.29.owrt/include/linux/efs_fs_sb.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/efs_fs_sb.h    2009-05-10 23:48:29.000000000 +0200
+@@ -9,7 +9,6 @@
+ #ifndef __EFS_FS_SB_H__
+ #define __EFS_FS_SB_H__
+-#include <linux/types.h>
+ #include <linux/magic.h>
+ /* EFS superblock magic numbers */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/elf-fdpic.h linux-2.6.29-rc3.owrt/include/linux/elf-fdpic.h
+--- linux-2.6.29.owrt/include/linux/elf-fdpic.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/elf-fdpic.h    2009-05-10 23:48:29.000000000 +0200
+@@ -58,13 +58,11 @@
+ #define ELF_FDPIC_FLAG_PRESENT                0x80000000      /* T if this object is present */
+ };
+-#ifdef __KERNEL__
+ #ifdef CONFIG_MMU
+ extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+                                     struct elf_fdpic_params *interp_params,
+                                     unsigned long *start_stack,
+                                     unsigned long *start_brk);
+ #endif
+-#endif /* __KERNEL__ */
+ #endif /* _LINUX_ELF_FDPIC_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/elf.h linux-2.6.29-rc3.owrt/include/linux/elf.h
+--- linux-2.6.29.owrt/include/linux/elf.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/elf.h  2009-05-10 23:48:29.000000000 +0200
+@@ -377,7 +377,6 @@
+   Elf64_Word n_type;  /* Content type */
+ } Elf64_Nhdr;
+-#ifdef __KERNEL__
+ #if ELF_CLASS == ELFCLASS32
+ extern Elf32_Dyn _DYNAMIC [];
+@@ -405,5 +404,5 @@
+ extern int elf_coredump_extra_notes_size(void);
+ extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
+ #endif
+-#endif /* __KERNEL__ */
++
+ #endif /* _LINUX_ELF_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/errqueue.h linux-2.6.29-rc3.owrt/include/linux/errqueue.h
+--- linux-2.6.29.owrt/include/linux/errqueue.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/errqueue.h     2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _LINUX_ERRQUEUE_H
+ #define _LINUX_ERRQUEUE_H 1
+-#include <linux/types.h>
+-
+ struct sock_extended_err
+ {
+       __u32   ee_errno;       
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/fb.h linux-2.6.29-rc3.owrt/include/linux/fb.h
+--- linux-2.6.29.owrt/include/linux/fb.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/fb.h   2009-05-10 23:48:29.000000000 +0200
+@@ -960,21 +960,6 @@
+ extern int num_registered_fb;
+ extern struct class *fb_class;
+-static inline int lock_fb_info(struct fb_info *info)
+-{
+-      mutex_lock(&info->lock);
+-      if (!info->fbops) {
+-              mutex_unlock(&info->lock);
+-              return 0;
+-      }
+-      return 1;
+-}
+-
+-static inline void unlock_fb_info(struct fb_info *info)
+-{
+-      mutex_unlock(&info->lock);
+-}
+-
+ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
+                                          u8 *src, u32 s_pitch, u32 height)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/firmware-map.h linux-2.6.29-rc3.owrt/include/linux/firmware-map.h
+--- linux-2.6.29.owrt/include/linux/firmware-map.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/firmware-map.h 2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,7 @@
+ /*
+  * include/linux/firmware-map.h:
+  *  Copyright (C) 2008 SUSE LINUX Products GmbH
+- *  by Bernhard Walle <bernhard.walle@gmx.de>
++ *  by Bernhard Walle <bwalle@suse.de>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License v2.0 as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/fs.h linux-2.6.29-rc3.owrt/include/linux/fs.h
+--- linux-2.6.29.owrt/include/linux/fs.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/fs.h   2009-05-10 23:48:29.000000000 +0200
+@@ -54,30 +54,24 @@
+ #define MAY_ACCESS 16
+ #define MAY_OPEN 32
+-/*
+- * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
+- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+- */
+-
+ /* file is open for reading */
+ #define FMODE_READ            ((__force fmode_t)1)
+ /* file is open for writing */
+ #define FMODE_WRITE           ((__force fmode_t)2)
+ /* file is seekable */
+ #define FMODE_LSEEK           ((__force fmode_t)4)
+-/* file can be accessed using pread */
++/* file can be accessed using pread/pwrite */
+ #define FMODE_PREAD           ((__force fmode_t)8)
+-/* file can be accessed using pwrite */
+-#define FMODE_PWRITE          ((__force fmode_t)16)
++#define FMODE_PWRITE          FMODE_PREAD     /* These go hand in hand */
+ /* File is opened for execution with sys_execve / sys_uselib */
+-#define FMODE_EXEC            ((__force fmode_t)32)
++#define FMODE_EXEC            ((__force fmode_t)16)
+ /* File is opened with O_NDELAY (only set for block devices) */
+-#define FMODE_NDELAY          ((__force fmode_t)64)
++#define FMODE_NDELAY          ((__force fmode_t)32)
+ /* File is opened with O_EXCL (only set for block devices) */
+-#define FMODE_EXCL            ((__force fmode_t)128)
++#define FMODE_EXCL            ((__force fmode_t)64)
+ /* File is opened using open(.., 3, ..) and is writeable only for ioctls
+    (specialy hack for floppy.c) */
+-#define FMODE_WRITE_IOCTL     ((__force fmode_t)256)
++#define FMODE_WRITE_IOCTL     ((__force fmode_t)128)
+ /*
+  * Don't update ctime and mtime.
+@@ -93,10 +87,10 @@
+ #define WRITE 1
+ #define READA 2               /* read-ahead  - don't block if no resources */
+ #define SWRITE 3      /* for ll_rw_block() - wait for buffer lock */
+-#define READ_SYNC     (READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
++#define READ_SYNC     (READ | (1 << BIO_RW_SYNC))
+ #define READ_META     (READ | (1 << BIO_RW_META))
+-#define WRITE_SYNC    (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
+-#define SWRITE_SYNC   (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
++#define WRITE_SYNC    (WRITE | (1 << BIO_RW_SYNC))
++#define SWRITE_SYNC   (SWRITE | (1 << BIO_RW_SYNC))
+ #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
+ #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/genetlink.h linux-2.6.29-rc3.owrt/include/linux/genetlink.h
+--- linux-2.6.29.owrt/include/linux/genetlink.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/genetlink.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_GENERIC_NETLINK_H
+ #define __LINUX_GENERIC_NETLINK_H
+-#include <linux/types.h>
+ #include <linux/netlink.h>
+ #define GENL_NAMSIZ   16      /* length of family name */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/gfs2_ondisk.h linux-2.6.29-rc3.owrt/include/linux/gfs2_ondisk.h
+--- linux-2.6.29.owrt/include/linux/gfs2_ondisk.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/gfs2_ondisk.h  2009-05-10 23:48:29.000000000 +0200
+@@ -10,8 +10,6 @@
+ #ifndef __GFS2_ONDISK_DOT_H__
+ #define __GFS2_ONDISK_DOT_H__
+-#include <linux/types.h>
+-
+ #define GFS2_MAGIC            0x01161970
+ #define GFS2_BASIC_BLOCK      512
+ #define GFS2_BASIC_BLOCK_SHIFT        9
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/hdreg.h linux-2.6.29-rc3.owrt/include/linux/hdreg.h
+--- linux-2.6.29.owrt/include/linux/hdreg.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/hdreg.h        2009-05-10 23:48:29.000000000 +0200
+@@ -511,6 +511,7 @@
+       unsigned short  words69_70[2];  /* reserved words 69-70
+                                        * future command overlap and queuing
+                                        */
++      /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
+       unsigned short  words71_74[4];  /* reserved words 71-74
+                                        * for IDENTIFY PACKET DEVICE command
+                                        */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/hiddev.h linux-2.6.29-rc3.owrt/include/linux/hiddev.h
+--- linux-2.6.29.owrt/include/linux/hiddev.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/hiddev.h       2009-05-10 23:48:29.000000000 +0200
+@@ -27,8 +27,6 @@
+  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+  */
+-#include <linux/types.h>
+-
+ /*
+  * The event structure itself
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/hid.h linux-2.6.29-rc3.owrt/include/linux/hid.h
+--- linux-2.6.29.owrt/include/linux/hid.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/hid.h  2009-05-10 23:48:29.000000000 +0200
+@@ -791,7 +791,6 @@
+               __FILE__ , ## arg)
+ #endif /* HID_FF */
+-#ifdef __KERNEL__
+ #ifdef CONFIG_HID_COMPAT
+ #define HID_COMPAT_LOAD_DRIVER(name)  \
+ /* prototype to avoid sparse warning */       \
+@@ -805,7 +804,6 @@
+       extern void hid_compat_##name(void);    \
+       hid_compat_##name();                    \
+ } while (0)
+-#endif /* __KERNEL__ */
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/hugetlb.h linux-2.6.29-rc3.owrt/include/linux/hugetlb.h
+--- linux-2.6.29.owrt/include/linux/hugetlb.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/hugetlb.h      2009-05-10 23:48:29.000000000 +0200
+@@ -33,8 +33,7 @@
+ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+                       unsigned long address, int write_access);
+ int hugetlb_reserve_pages(struct inode *inode, long from, long to,
+-                                              struct vm_area_struct *vma,
+-                                              int acctflags);
++                                              struct vm_area_struct *vma);
+ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
+ extern unsigned long hugepages_treat_as_movable;
+@@ -139,7 +138,7 @@
+ extern const struct file_operations hugetlbfs_file_operations;
+ extern struct vm_operations_struct hugetlb_vm_ops;
+-struct file *hugetlb_file_setup(const char *name, size_t, int);
++struct file *hugetlb_file_setup(const char *name, size_t);
+ int hugetlb_get_quota(struct address_space *mapping, long delta);
+ void hugetlb_put_quota(struct address_space *mapping, long delta);
+@@ -159,9 +158,9 @@
+ }
+ #else /* !CONFIG_HUGETLBFS */
+-#define is_file_hugepages(file)                       0
+-#define set_file_hugepages(file)              BUG()
+-#define hugetlb_file_setup(name,size,acctflag)        ERR_PTR(-ENOSYS)
++#define is_file_hugepages(file)               0
++#define set_file_hugepages(file)      BUG()
++#define hugetlb_file_setup(name,size) ERR_PTR(-ENOSYS)
+ #endif /* !CONFIG_HUGETLBFS */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/i2c-dev.h linux-2.6.29-rc3.owrt/include/linux/i2c-dev.h
+--- linux-2.6.29.owrt/include/linux/i2c-dev.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/i2c-dev.h      2009-05-10 23:48:29.000000000 +0200
+@@ -33,7 +33,7 @@
+  */
+ #define I2C_RETRIES   0x0701  /* number of times a device address should
+                                  be polled when not acknowledging */
+-#define I2C_TIMEOUT   0x0702  /* set timeout in units of 10 ms */
++#define I2C_TIMEOUT   0x0702  /* set timeout in jiffies - call with int */
+ /* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+  * are NOT supported! (due to code brokenness)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/i2c.h linux-2.6.29-rc3.owrt/include/linux/i2c.h
+--- linux-2.6.29.owrt/include/linux/i2c.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/i2c.h  2009-05-10 23:48:29.000000000 +0200
+@@ -361,7 +361,7 @@
+       struct mutex bus_lock;
+       struct mutex clist_lock;
+-      int timeout;                    /* in jiffies */
++      int timeout;
+       int retries;
+       struct device dev;              /* the adapter device */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/icmpv6.h linux-2.6.29-rc3.owrt/include/linux/icmpv6.h
+--- linux-2.6.29.owrt/include/linux/icmpv6.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/icmpv6.h       2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _LINUX_ICMPV6_H
+ #define _LINUX_ICMPV6_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ struct icmp6hdr {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ide.h linux-2.6.29-rc3.owrt/include/linux/ide.h
+--- linux-2.6.29.owrt/include/linux/ide.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ide.h  2009-05-10 23:48:29.000000000 +0200
+@@ -663,7 +663,7 @@
+ #define to_ide_device(dev)            container_of(dev, ide_drive_t, gendev)
+ #define to_ide_drv(obj, cont_type)    \
+-      container_of(obj, struct cont_type, dev)
++      container_of(obj, struct cont_type, kref)
+ #define ide_drv_g(disk, cont_type)    \
+       container_of((disk)->private_data, struct cont_type, driver)
+@@ -797,7 +797,6 @@
+       struct scatterlist *sg_table;
+       int sg_max_nents;               /* Maximum number of entries in it */
+       int sg_nents;                   /* Current number of entries in it */
+-      int orig_sg_nents;
+       int sg_dma_direction;           /* dma transfer direction */
+       /* data phase of the active command (currently only valid for PIO/DMA) */
+@@ -867,7 +866,6 @@
+       unsigned int    n_ports;
+       struct device   *dev[2];
+       unsigned int    (*init_chipset)(struct pci_dev *);
+-      irq_handler_t   irq_handler;
+       unsigned long   host_flags;
+       void            *host_priv;
+       ide_hwif_t      *cur_port;      /* for hosts requiring serialization */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_addr.h linux-2.6.29-rc3.owrt/include/linux/if_addr.h
+--- linux-2.6.29.owrt/include/linux/if_addr.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_addr.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_IF_ADDR_H
+ #define __LINUX_IF_ADDR_H
+-#include <linux/types.h>
+ #include <linux/netlink.h>
+ struct ifaddrmsg
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_addrlabel.h linux-2.6.29-rc3.owrt/include/linux/if_addrlabel.h
+--- linux-2.6.29.owrt/include/linux/if_addrlabel.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_addrlabel.h 2009-05-10 23:48:29.000000000 +0200
+@@ -10,8 +10,6 @@
+ #ifndef __LINUX_IF_ADDRLABEL_H
+ #define __LINUX_IF_ADDRLABEL_H
+-#include <linux/types.h>
+-
+ struct ifaddrlblmsg
+ {
+       __u8            ifal_family;            /* Address family */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_fc.h linux-2.6.29-rc3.owrt/include/linux/if_fc.h
+--- linux-2.6.29.owrt/include/linux/if_fc.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_fc.h        2009-05-10 23:48:29.000000000 +0200
+@@ -20,7 +20,6 @@
+ #ifndef _LINUX_IF_FC_H
+ #define _LINUX_IF_FC_H
+-#include <linux/types.h>
+ #define FC_ALEN       6               /* Octets in one ethernet addr   */
+ #define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_hippi.h linux-2.6.29-rc3.owrt/include/linux/if_hippi.h
+--- linux-2.6.29.owrt/include/linux/if_hippi.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_hippi.h     2009-05-10 23:48:29.000000000 +0200
+@@ -22,7 +22,6 @@
+ #ifndef _LINUX_IF_HIPPI_H
+ #define _LINUX_IF_HIPPI_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_link.h linux-2.6.29-rc3.owrt/include/linux/if_link.h
+--- linux-2.6.29.owrt/include/linux/if_link.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_link.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _LINUX_IF_LINK_H
+ #define _LINUX_IF_LINK_H
+-#include <linux/types.h>
+ #include <linux/netlink.h>
+ /* The struct should be in sync with struct net_device_stats */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_ppp.h linux-2.6.29-rc3.owrt/include/linux/if_ppp.h
+--- linux-2.6.29.owrt/include/linux/if_ppp.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_ppp.h       2009-05-10 23:48:29.000000000 +0200
+@@ -33,7 +33,6 @@
+ #ifndef _IF_PPP_H_
+ #define _IF_PPP_H_
+-#include <linux/types.h>
+ #include <linux/compiler.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_strip.h linux-2.6.29-rc3.owrt/include/linux/if_strip.h
+--- linux-2.6.29.owrt/include/linux/if_strip.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_strip.h     2009-05-10 23:48:29.000000000 +0200
+@@ -18,8 +18,6 @@
+ #ifndef __LINUX_STRIP_H
+ #define __LINUX_STRIP_H
+-#include <linux/types.h>
+-
+ typedef struct {
+     __u8 c[6];
+ } MetricomAddress;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_tr.h linux-2.6.29-rc3.owrt/include/linux/if_tr.h
+--- linux-2.6.29.owrt/include/linux/if_tr.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_tr.h        2009-05-10 23:48:29.000000000 +0200
+@@ -19,7 +19,6 @@
+ #ifndef _LINUX_IF_TR_H
+ #define _LINUX_IF_TR_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>    /* For __be16 */
+ /* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_tunnel.h linux-2.6.29-rc3.owrt/include/linux/if_tunnel.h
+--- linux-2.6.29.owrt/include/linux/if_tunnel.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_tunnel.h    2009-05-10 23:48:29.000000000 +0200
+@@ -2,10 +2,7 @@
+ #define _IF_TUNNEL_H_
+ #include <linux/types.h>
+-
+-#ifdef __KERNEL__
+ #include <linux/ip.h>
+-#endif
+ #define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+ #define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/if_vlan.h linux-2.6.29-rc3.owrt/include/linux/if_vlan.h
+--- linux-2.6.29.owrt/include/linux/if_vlan.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/if_vlan.h      2009-05-10 23:48:29.000000000 +0200
+@@ -210,7 +210,6 @@
+       /* Move the mac addresses to the beginning of the new header. */
+       memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN);
+-      skb->mac_header -= VLAN_HLEN;
+       /* first, the ethernet type */
+       veth->h_vlan_proto = htons(ETH_P_8021Q);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/igmp.h linux-2.6.29-rc3.owrt/include/linux/igmp.h
+--- linux-2.6.29.owrt/include/linux/igmp.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/igmp.h 2009-05-10 23:48:29.000000000 +0200
+@@ -16,7 +16,6 @@
+ #ifndef _LINUX_IGMP_H
+ #define _LINUX_IGMP_H
+-#include <linux/types.h>
+ #include <asm/byteorder.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/inet_diag.h linux-2.6.29-rc3.owrt/include/linux/inet_diag.h
+--- linux-2.6.29.owrt/include/linux/inet_diag.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/inet_diag.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _INET_DIAG_H_
+ #define _INET_DIAG_H_ 1
+-#include <linux/types.h>
+-
+ /* Just some random number */
+ #define TCPDIAG_GETSOCK 18
+ #define DCCPDIAG_GETSOCK 19
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/init_task.h linux-2.6.29-rc3.owrt/include/linux/init_task.h
+--- linux-2.6.29.owrt/include/linux/init_task.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/init_task.h    2009-05-10 23:48:29.000000000 +0200
+@@ -48,11 +48,12 @@
+       .posix_timers    = LIST_HEAD_INIT(sig.posix_timers),            \
+       .cpu_timers     = INIT_CPU_TIMERS(sig.cpu_timers),              \
+       .rlim           = INIT_RLIMITS,                                 \
+-      .cputimer       = {                                             \
+-              .cputime = INIT_CPUTIME,                                \
+-              .running = 0,                                           \
+-              .lock = __SPIN_LOCK_UNLOCKED(sig.cputimer.lock),        \
+-      },                                                              \
++      .cputime        = { .totals = {                                 \
++              .utime = cputime_zero,                                  \
++              .stime = cputime_zero,                                  \
++              .sum_exec_runtime = 0,                                  \
++              .lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock),  \
++      }, },                                                           \
+ }
+ extern struct nsproxy init_nsproxy;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/intel-iommu.h linux-2.6.29-rc3.owrt/include/linux/intel-iommu.h
+--- linux-2.6.29.owrt/include/linux/intel-iommu.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/intel-iommu.h  2009-05-10 23:48:29.000000000 +0200
+@@ -194,7 +194,6 @@
+ /* FSTS_REG */
+ #define DMA_FSTS_PPF ((u32)2)
+ #define DMA_FSTS_PFO ((u32)1)
+-#define DMA_FSTS_IQE (1 << 4)
+ #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
+ /* FRCD_REG, 32 bits access */
+@@ -329,7 +328,7 @@
+                         unsigned int size_order, u64 type,
+                         int non_present_entry_flush);
+-extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
++extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
+ extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
+ extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/io-mapping.h linux-2.6.29-rc3.owrt/include/linux/io-mapping.h
+--- linux-2.6.29.owrt/include/linux/io-mapping.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/io-mapping.h   2009-05-10 23:48:29.000000000 +0200
+@@ -30,13 +30,10 @@
+  * See Documentation/io_mapping.txt
+  */
+-#ifdef CONFIG_HAVE_ATOMIC_IOMAP
++/* this struct isn't actually defined anywhere */
++struct io_mapping;
+-struct io_mapping {
+-      resource_size_t base;
+-      unsigned long size;
+-      pgprot_t prot;
+-};
++#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+ /*
+  * For small address space machines, mapping large objects
+@@ -46,40 +43,23 @@
+  */
+ static inline struct io_mapping *
+-io_mapping_create_wc(resource_size_t base, unsigned long size)
++io_mapping_create_wc(unsigned long base, unsigned long size)
+ {
+-      struct io_mapping *iomap;
+-
+-      if (!is_io_mapping_possible(base, size))
+-              return NULL;
+-
+-      iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
+-      if (!iomap)
+-              return NULL;
+-
+-      iomap->base = base;
+-      iomap->size = size;
+-      iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL));
+-      return iomap;
++      return (struct io_mapping *) base;
+ }
+ static inline void
+ io_mapping_free(struct io_mapping *mapping)
+ {
+-      kfree(mapping);
+ }
+ /* Atomic map/unmap */
+ static inline void *
+ io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
+ {
+-      resource_size_t phys_addr;
+-      unsigned long pfn;
+-
+-      BUG_ON(offset >= mapping->size);
+-      phys_addr = mapping->base + offset;
+-      pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
+-      return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot);
++      offset += (unsigned long) mapping;
++      return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0,
++                                   __pgprot(__PAGE_KERNEL_WC));
+ }
+ static inline void
+@@ -91,12 +71,8 @@
+ static inline void *
+ io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
+ {
+-      resource_size_t phys_addr;
+-
+-      BUG_ON(offset >= mapping->size);
+-      phys_addr = mapping->base + offset;
+-
+-      return ioremap_wc(phys_addr, PAGE_SIZE);
++      offset += (unsigned long) mapping;
++      return ioremap_wc(offset, PAGE_SIZE);
+ }
+ static inline void
+@@ -107,12 +83,9 @@
+ #else
+-/* this struct isn't actually defined anywhere */
+-struct io_mapping;
+-
+ /* Create the io_mapping object*/
+ static inline struct io_mapping *
+-io_mapping_create_wc(resource_size_t base, unsigned long size)
++io_mapping_create_wc(unsigned long base, unsigned long size)
+ {
+       return (struct io_mapping *) ioremap_wc(base, size);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ip6_tunnel.h linux-2.6.29-rc3.owrt/include/linux/ip6_tunnel.h
+--- linux-2.6.29.owrt/include/linux/ip6_tunnel.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ip6_tunnel.h   2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _IP6_TUNNEL_H
+ #define _IP6_TUNNEL_H
+-#include <linux/types.h>
+-
+ #define IPV6_TLV_TNL_ENCAP_LIMIT 4
+ #define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ipv6.h linux-2.6.29-rc3.owrt/include/linux/ipv6.h
+--- linux-2.6.29.owrt/include/linux/ipv6.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ipv6.h 2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _IPV6_H
+ #define _IPV6_H
+-#include <linux/types.h>
+ #include <linux/in6.h>
+ #include <asm/byteorder.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ipv6_route.h linux-2.6.29-rc3.owrt/include/linux/ipv6_route.h
+--- linux-2.6.29.owrt/include/linux/ipv6_route.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ipv6_route.h   2009-05-10 23:48:29.000000000 +0200
+@@ -13,8 +13,6 @@
+ #ifndef _LINUX_IPV6_ROUTE_H
+ #define _LINUX_IPV6_ROUTE_H
+-#include <linux/types.h>
+-
+ #define RTF_DEFAULT   0x00010000      /* default - learned via ND     */
+ #define RTF_ALLONLINK 0x00020000      /* (deprecated and will be removed)
+                                          fallback, no routers on link */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ipx.h linux-2.6.29-rc3.owrt/include/linux/ipx.h
+--- linux-2.6.29.owrt/include/linux/ipx.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ipx.h  2009-05-10 23:48:29.000000000 +0200
+@@ -1,6 +1,5 @@
+ #ifndef _IPX_H_
+ #define _IPX_H_
+-#include <linux/types.h>
+ #include <linux/sockios.h>
+ #include <linux/socket.h>
+ #define IPX_NODE_LEN  6
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/irda.h linux-2.6.29-rc3.owrt/include/linux/irda.h
+--- linux-2.6.29.owrt/include/linux/irda.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/irda.h 2009-05-10 23:48:29.000000000 +0200
+@@ -25,8 +25,6 @@
+ #ifndef KERNEL_IRDA_H
+ #define KERNEL_IRDA_H
+-#include <linux/types.h>
+-
+ /* Please do *not* add any #include in this file, this file is
+  * included as-is in user space.
+  * Please fix the calling file to properly included needed files before
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/jbd2.h linux-2.6.29-rc3.owrt/include/linux/jbd2.h
+--- linux-2.6.29.owrt/include/linux/jbd2.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/jbd2.h 2009-05-10 23:48:29.000000000 +0200
+@@ -308,8 +308,7 @@
+               int val = (expr);                                            \
+               if (!val) {                                                  \
+                       printk(KERN_ERR                                      \
+-                             "JBD2 unexpected failure: %s: %s;\n",         \
+-                             __func__, #expr);                             \
++                              "EXT3-fs unexpected failure: %s;\n",# expr); \
+                       printk(KERN_ERR why "\n");                           \
+               }                                                            \
+               val;                                                         \
+@@ -1150,8 +1149,7 @@
+ extern int       jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
+ extern int       jbd2_journal_force_commit(journal_t *);
+ extern int       jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
+-extern int       jbd2_journal_begin_ordered_truncate(journal_t *journal,
+-                              struct jbd2_inode *inode, loff_t new_size);
++extern int       jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode, loff_t new_size);
+ extern void      jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
+ extern void      jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/Kbuild linux-2.6.29-rc3.owrt/include/linux/Kbuild
+--- linux-2.6.29.owrt/include/linux/Kbuild     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/Kbuild 2009-05-10 23:48:29.000000000 +0200
+@@ -41,7 +41,6 @@
+ header-y += bfs_fs.h
+ header-y += blkpg.h
+ header-y += bpqether.h
+-header-y += bsg.h
+ header-y += can.h
+ header-y += cdk.h
+ header-y += chio.h
+@@ -52,7 +51,6 @@
+ header-y += cgroupstats.h
+ header-y += cramfs_fs.h
+ header-y += cycx_cfm.h
+-header-y += dcbnl.h
+ header-y += dlmconstants.h
+ header-y += dlm_device.h
+ header-y += dlm_netlink.h
+@@ -91,6 +89,7 @@
+ header-y += if_slip.h
+ header-y += if_strip.h
+ header-y += if_tun.h
++header-y += if_tunnel.h
+ header-y += in_route.h
+ header-y += ioctl.h
+ header-y += ip6_tunnel.h
+@@ -236,7 +235,6 @@
+ unifdef-y += if_pppol2tp.h
+ unifdef-y += if_pppox.h
+ unifdef-y += if_tr.h
+-unifdef-y += if_tunnel.h
+ unifdef-y += if_vlan.h
+ unifdef-y += igmp.h
+ unifdef-y += inet_diag.h
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/kernel.h linux-2.6.29-rc3.owrt/include/linux/kernel.h
+--- linux-2.6.29.owrt/include/linux/kernel.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/kernel.h       2009-05-10 23:48:29.000000000 +0200
+@@ -480,8 +480,7 @@
+ /*
+  * swap - swap value of @a and @b
+  */
+-#define swap(a, b) \
+-      do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
++#define swap(a, b) ({ typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; })
+ /**
+  * container_of - cast a member of a structure out to the containing structure
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/kprobes.h linux-2.6.29-rc3.owrt/include/linux/kprobes.h
+--- linux-2.6.29.owrt/include/linux/kprobes.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/kprobes.h      2009-05-10 23:48:29.000000000 +0200
+@@ -49,13 +49,6 @@
+ /* Attach to insert probes on any functions which should be ignored*/
+ #define __kprobes     __attribute__((__section__(".kprobes.text"))) notrace
+-#else /* CONFIG_KPROBES */
+-typedef int kprobe_opcode_t;
+-struct arch_specific_insn {
+-      int dummy;
+-};
+-#define __kprobes     notrace
+-#endif /* CONFIG_KPROBES */
+ struct kprobe;
+ struct pt_regs;
+@@ -138,6 +131,23 @@
+ /* For backward compatibility with old code using JPROBE_ENTRY() */
+ #define JPROBE_ENTRY(handler) (handler)
++DECLARE_PER_CPU(struct kprobe *, current_kprobe);
++DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
++
++#ifdef CONFIG_KRETPROBES
++extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
++                                 struct pt_regs *regs);
++extern int arch_trampoline_kprobe(struct kprobe *p);
++#else /* CONFIG_KRETPROBES */
++static inline void arch_prepare_kretprobe(struct kretprobe *rp,
++                                      struct pt_regs *regs)
++{
++}
++static inline int arch_trampoline_kprobe(struct kprobe *p)
++{
++      return 0;
++}
++#endif /* CONFIG_KRETPROBES */
+ /*
+  * Function-return probe -
+  * Note:
+@@ -178,25 +188,6 @@
+       unsigned long range;
+ };
+-#ifdef CONFIG_KPROBES
+-DECLARE_PER_CPU(struct kprobe *, current_kprobe);
+-DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+-
+-#ifdef CONFIG_KRETPROBES
+-extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
+-                                 struct pt_regs *regs);
+-extern int arch_trampoline_kprobe(struct kprobe *p);
+-#else /* CONFIG_KRETPROBES */
+-static inline void arch_prepare_kretprobe(struct kretprobe *rp,
+-                                      struct pt_regs *regs)
+-{
+-}
+-static inline int arch_trampoline_kprobe(struct kprobe *p)
+-{
+-      return 0;
+-}
+-#endif /* CONFIG_KRETPROBES */
+-
+ extern struct kretprobe_blackpoint kretprobe_blacklist[];
+ static inline void kretprobe_assert(struct kretprobe_instance *ri,
+@@ -273,6 +264,10 @@
+ #else /* CONFIG_KPROBES */
++#define __kprobes     notrace
++struct jprobe;
++struct kretprobe;
++
+ static inline struct kprobe *get_kprobe(void *addr)
+ {
+       return NULL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/kvm.h linux-2.6.29-rc3.owrt/include/linux/kvm.h
+--- linux-2.6.29.owrt/include/linux/kvm.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/kvm.h  2009-05-10 23:48:29.000000000 +0200
+@@ -58,10 +58,10 @@
+       __u32 pad;
+         union {
+               char dummy[512];  /* reserving space */
+-#ifdef __KVM_HAVE_PIT
++#ifdef CONFIG_X86
+               struct kvm_pic_state pic;
+ #endif
+-#ifdef __KVM_HAVE_IOAPIC
++#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+               struct kvm_ioapic_state ioapic;
+ #endif
+       } chip;
+@@ -384,16 +384,16 @@
+ #define KVM_CAP_MP_STATE 14
+ #define KVM_CAP_COALESCED_MMIO 15
+ #define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
+-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
++#if defined(CONFIG_X86)||defined(CONFIG_IA64)
+ #define KVM_CAP_DEVICE_ASSIGNMENT 17
+ #endif
+ #define KVM_CAP_IOMMU 18
+-#ifdef __KVM_HAVE_MSI
++#if defined(CONFIG_X86)
+ #define KVM_CAP_DEVICE_MSI 20
+ #endif
+ /* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+ #define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+-#ifdef __KVM_HAVE_USER_NMI
++#if defined(CONFIG_X86)
+ #define KVM_CAP_USER_NMI 22
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/kvm_host.h linux-2.6.29-rc3.owrt/include/linux/kvm_host.h
+--- linux-2.6.29.owrt/include/linux/kvm_host.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/kvm_host.h     2009-05-10 23:48:29.000000000 +0200
+@@ -285,7 +285,6 @@
+ struct  kvm *kvm_arch_create_vm(void);
+ void kvm_arch_destroy_vm(struct kvm *kvm);
+ void kvm_free_all_assigned_devices(struct kvm *kvm);
+-void kvm_arch_sync_events(struct kvm *kvm);
+ int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
+ int kvm_cpu_has_interrupt(struct kvm_vcpu *v);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/libata.h linux-2.6.29-rc3.owrt/include/linux/libata.h
+--- linux-2.6.29.owrt/include/linux/libata.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/libata.h       2009-05-10 23:48:29.000000000 +0200
+@@ -275,7 +275,7 @@
+        * advised to wait only for the following duration before
+        * doing SRST.
+        */
+-      ATA_TMOUT_PMP_SRST_WAIT = 5000,
++      ATA_TMOUT_PMP_SRST_WAIT = 1000,
+       /* ATA bus states */
+       BUS_UNKNOWN             = 0,
+@@ -380,7 +380,6 @@
+       ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
+                                                   not multiple of 16 bytes */
+       ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),  /* firwmare update warning */
+-      ATA_HORKAGE_1_5_GBPS    = (1 << 13),    /* force 1.5 Gbps */
+        /* DMA mask for user DMA control: User visible values; DO NOT
+           renumber */
+@@ -530,7 +529,6 @@
+       unsigned long           flags;          /* ATA_QCFLAG_xxx */
+       unsigned int            tag;
+       unsigned int            n_elem;
+-      unsigned int            orig_n_elem;
+       int                     dma_dir;
+@@ -582,7 +580,7 @@
+       acpi_handle             acpi_handle;
+       union acpi_object       *gtf_cache;
+ #endif
+-      /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
++      /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+       u64                     n_sectors;      /* size of device, if ATA */
+       unsigned int            class;          /* ATA_DEV_xxx */
+       unsigned long           unpark_deadline;
+@@ -607,22 +605,20 @@
+       u16                     heads;          /* Number of heads */
+       u16                     sectors;        /* Number of sectors per track */
++      /* error history */
++      int                     spdn_cnt;
++      struct ata_ering        ering;
++
+       union {
+               u16             id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+               u32             gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
+       };
+-
+-      /* error history */
+-      int                     spdn_cnt;
+-      /* ering is CLEAR_END, read comment above CLEAR_END */
+-      struct ata_ering        ering;
+ };
+-/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+- * cleared to zero on ata_dev_init().
++/* Offset into struct ata_device.  Fields above it are maintained
++ * acress device init.  Fields below are zeroed.
+  */
+-#define ATA_DEVICE_CLEAR_BEGIN                offsetof(struct ata_device, n_sectors)
+-#define ATA_DEVICE_CLEAR_END          offsetof(struct ata_device, ering)
++#define ATA_DEVICE_CLEAR_OFFSET               offsetof(struct ata_device, n_sectors)
+ struct ata_eh_info {
+       struct ata_device       *dev;           /* offending device */
+@@ -751,8 +747,7 @@
+       acpi_handle             acpi_handle;
+       struct ata_acpi_gtm     __acpi_init_gtm; /* use ata_acpi_init_gtm() */
+ #endif
+-      /* owned by EH */
+-      u8                      sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
++      u8                      sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+ };
+ /* The following initializer overrides a method to NULL whether one of
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/lockd/lockd.h linux-2.6.29-rc3.owrt/include/linux/lockd/lockd.h
+--- linux-2.6.29.owrt/include/linux/lockd/lockd.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/lockd/lockd.h  2009-05-10 23:48:29.000000000 +0200
+@@ -346,7 +346,6 @@
+       return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
+ }
+-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
+                                 const struct sockaddr *sap2)
+ {
+@@ -354,13 +353,6 @@
+       const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
+       return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr);
+ }
+-#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+-static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
+-                                const struct sockaddr *sap2)
+-{
+-      return 0;
+-}
+-#endif        /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+ /*
+  * Compare two host addresses
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/minix_fs.h linux-2.6.29-rc3.owrt/include/linux/minix_fs.h
+--- linux-2.6.29.owrt/include/linux/minix_fs.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/minix_fs.h     2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _LINUX_MINIX_FS_H
+ #define _LINUX_MINIX_FS_H
+-#include <linux/types.h>
+ #include <linux/magic.h>
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/mm.h linux-2.6.29-rc3.owrt/include/linux/mm.h
+--- linux-2.6.29.owrt/include/linux/mm.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/mm.h   2009-05-10 23:48:29.000000000 +0200
+@@ -1041,23 +1041,10 @@
+ typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
+ extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data);
+ extern void sparse_memory_present_with_active_regions(int nid);
+-#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+-
+-#if !defined(CONFIG_ARCH_POPULATES_NODE_MAP) && \
+-    !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
+-static inline int __early_pfn_to_nid(unsigned long pfn)
+-{
+-      return 0;
+-}
+-#else
+-/* please see mm/page_alloc.c */
+-extern int __meminit early_pfn_to_nid(unsigned long pfn);
+-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+-/* there is a per-arch backend function. */
+-extern int __meminit __early_pfn_to_nid(unsigned long pfn);
++#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
++extern int early_pfn_to_nid(unsigned long pfn);
+ #endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+-#endif
+-
++#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+ extern void set_dma_reserve(unsigned long new_dma_reserve);
+ extern void memmap_init_zone(unsigned long, int, unsigned long,
+                               unsigned long, enum memmap_context);
+@@ -1142,7 +1129,8 @@
+       unsigned long flag, unsigned long pgoff);
+ extern unsigned long mmap_region(struct file *file, unsigned long addr,
+       unsigned long len, unsigned long flags,
+-      unsigned int vm_flags, unsigned long pgoff);
++      unsigned int vm_flags, unsigned long pgoff,
++      int accountable);
+ static inline unsigned long do_mmap(struct file *file, unsigned long addr,
+       unsigned long len, unsigned long prot,
+@@ -1172,7 +1160,6 @@
+ /* mm/page-writeback.c */
+ int write_one_page(struct page *page, int wait);
+-void task_dirty_inc(struct task_struct *tsk);
+ /* readahead.c */
+ #define VM_MAX_READAHEAD      128     /* kbytes */
+@@ -1318,6 +1305,5 @@
+ extern void *alloc_locked_buffer(size_t size);
+ extern void free_locked_buffer(void *buffer, size_t size);
+-extern void release_locked_buffer(void *buffer, size_t size);
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_MM_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/mm_types.h linux-2.6.29-rc3.owrt/include/linux/mm_types.h
+--- linux-2.6.29.owrt/include/linux/mm_types.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/mm_types.h     2009-05-10 23:48:29.000000000 +0200
+@@ -276,7 +276,4 @@
+ #endif
+ };
+-/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+-#define mm_cpumask(mm) (&(mm)->cpu_vm_mask)
+-
+ #endif /* _LINUX_MM_TYPES_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/mmzone.h linux-2.6.29-rc3.owrt/include/linux/mmzone.h
+--- linux-2.6.29.owrt/include/linux/mmzone.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/mmzone.h       2009-05-10 23:48:29.000000000 +0200
+@@ -1071,7 +1071,7 @@
+ #endif /* CONFIG_SPARSEMEM */
+ #ifdef CONFIG_NODES_SPAN_OTHER_NODES
+-bool early_pfn_in_nid(unsigned long pfn, int nid);
++#define early_pfn_in_nid(pfn, nid)    (early_pfn_to_nid(pfn) == (nid))
+ #else
+ #define early_pfn_in_nid(pfn, nid)    (1)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/module.h linux-2.6.29-rc3.owrt/include/linux/module.h
+--- linux-2.6.29.owrt/include/linux/module.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/module.h       2009-05-10 23:48:29.000000000 +0200
+@@ -219,6 +219,11 @@
+ #endif
++struct module_ref
++{
++      local_t count;
++} ____cacheline_aligned;
++
+ enum module_state
+ {
+       MODULE_STATE_LIVE,
+@@ -339,11 +344,8 @@
+       /* Destruction function. */
+       void (*exit)(void);
+-#ifdef CONFIG_SMP
+-      char *refptr;
+-#else
+-      local_t ref;
+-#endif
++      /* Reference counts */
++      struct module_ref ref[NR_CPUS];
+ #endif
+ };
+ #ifndef MODULE_ARCH_INIT
+@@ -393,21 +395,13 @@
+ #define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
+ void symbol_put_addr(void *addr);
+-static inline local_t *__module_ref_addr(struct module *mod, int cpu)
+-{
+-#ifdef CONFIG_SMP
+-      return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+-#else
+-      return &mod->ref;
+-#endif
+-}
+-
+ /* Sometimes we know we already have a refcount, and it's easier not
+    to handle the error case (which only happens with rmmod --wait). */
+ static inline void __module_get(struct module *module)
+ {
+       if (module) {
+-              local_inc(__module_ref_addr(module, get_cpu()));
++              BUG_ON(module_refcount(module) == 0);
++              local_inc(&module->ref[get_cpu()].count);
+               put_cpu();
+       }
+ }
+@@ -419,7 +413,7 @@
+       if (module) {
+               unsigned int cpu = get_cpu();
+               if (likely(module_is_live(module)))
+-                      local_inc(__module_ref_addr(module, cpu));
++                      local_inc(&module->ref[cpu].count);
+               else
+                       ret = 0;
+               put_cpu();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/msdos_fs.h linux-2.6.29-rc3.owrt/include/linux/msdos_fs.h
+--- linux-2.6.29.owrt/include/linux/msdos_fs.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/msdos_fs.h     2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef _LINUX_MSDOS_FS_H
+ #define _LINUX_MSDOS_FS_H
+-#include <linux/types.h>
+ #include <linux/magic.h>
+ #include <asm/byteorder.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/neighbour.h linux-2.6.29-rc3.owrt/include/linux/neighbour.h
+--- linux-2.6.29.owrt/include/linux/neighbour.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/neighbour.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_NEIGHBOUR_H
+ #define __LINUX_NEIGHBOUR_H
+-#include <linux/types.h>
+ #include <linux/netlink.h>
+ struct ndmsg
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/netdevice.h linux-2.6.29-rc3.owrt/include/linux/netdevice.h
+--- linux-2.6.29.owrt/include/linux/netdevice.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/netdevice.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1081,7 +1081,6 @@
+ extern int            register_netdevice_notifier(struct notifier_block *nb);
+ extern int            unregister_netdevice_notifier(struct notifier_block *nb);
+ extern int            init_dummy_netdev(struct net_device *dev);
+-extern void           netdev_resync_ops(struct net_device *dev);
+ extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
+ extern struct net_device      *dev_get_by_index(struct net *net, int ifindex);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/netfilter/xt_conntrack.h linux-2.6.29-rc3.owrt/include/linux/netfilter/xt_conntrack.h
+--- linux-2.6.29.owrt/include/linux/netfilter/xt_conntrack.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/netfilter/xt_conntrack.h       2009-05-10 23:48:29.000000000 +0200
+@@ -5,7 +5,6 @@
+ #ifndef _XT_CONNTRACK_H
+ #define _XT_CONNTRACK_H
+-#include <linux/types.h>
+ #include <linux/netfilter/nf_conntrack_tuple_common.h>
+ #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/netfilter/xt_NFLOG.h linux-2.6.29-rc3.owrt/include/linux/netfilter/xt_NFLOG.h
+--- linux-2.6.29.owrt/include/linux/netfilter/xt_NFLOG.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/netfilter/xt_NFLOG.h   2009-05-10 23:48:29.000000000 +0200
+@@ -2,7 +2,7 @@
+ #define _XT_NFLOG_TARGET
+ #define XT_NFLOG_DEFAULT_GROUP                0x1
+-#define XT_NFLOG_DEFAULT_THRESHOLD    0
++#define XT_NFLOG_DEFAULT_THRESHOLD    1
+ #define XT_NFLOG_MASK                 0x0
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfsacl.h linux-2.6.29-rc3.owrt/include/linux/nfsacl.h
+--- linux-2.6.29.owrt/include/linux/nfsacl.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfsacl.h       2009-05-10 23:48:29.000000000 +0200
+@@ -37,9 +37,6 @@
+ #define NFSACL_MAXPAGES               ((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
+                                >> PAGE_SHIFT)
+-#define NFS_ACL_MAX_ENTRIES_INLINE    (5)
+-#define NFS_ACL_INLINE_BUFSIZE        ((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
+-
+ static inline unsigned int
+ nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfsd/export.h linux-2.6.29-rc3.owrt/include/linux/nfsd/export.h
+--- linux-2.6.29.owrt/include/linux/nfsd/export.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfsd/export.h  2009-05-10 23:48:29.000000000 +0200
+@@ -10,8 +10,9 @@
+ #ifndef NFSD_EXPORT_H
+ #define NFSD_EXPORT_H
+-# include <linux/types.h>
++#include <asm/types.h>
+ #ifdef __KERNEL__
++# include <linux/types.h>
+ # include <linux/in.h>
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfsd/nfsfh.h linux-2.6.29-rc3.owrt/include/linux/nfsd/nfsfh.h
+--- linux-2.6.29.owrt/include/linux/nfsd/nfsfh.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfsd/nfsfh.h   2009-05-10 23:48:29.000000000 +0200
+@@ -14,8 +14,9 @@
+ #ifndef _LINUX_NFSD_FH_H
+ #define _LINUX_NFSD_FH_H
+-# include <linux/types.h>
++#include <asm/types.h>
+ #ifdef __KERNEL__
++# include <linux/types.h>
+ # include <linux/string.h>
+ # include <linux/fs.h>
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfsd/syscall.h linux-2.6.29-rc3.owrt/include/linux/nfsd/syscall.h
+--- linux-2.6.29.owrt/include/linux/nfsd/syscall.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfsd/syscall.h 2009-05-10 23:48:29.000000000 +0200
+@@ -9,8 +9,9 @@
+ #ifndef NFSD_SYSCALL_H
+ #define NFSD_SYSCALL_H
+-# include <linux/types.h>
++#include <asm/types.h>
+ #ifdef __KERNEL__
++# include <linux/types.h>
+ # include <linux/in.h>
+ #endif 
+ #include <linux/posix_types.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfs_idmap.h linux-2.6.29-rc3.owrt/include/linux/nfs_idmap.h
+--- linux-2.6.29.owrt/include/linux/nfs_idmap.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfs_idmap.h    2009-05-10 23:48:29.000000000 +0200
+@@ -37,8 +37,6 @@
+ #ifndef NFS_IDMAP_H
+ #define NFS_IDMAP_H
+-#include <linux/types.h>
+-
+ /* XXX from bits/utmp.h  */
+ #define IDMAP_NAMESZ  128
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nfs_xdr.h linux-2.6.29-rc3.owrt/include/linux/nfs_xdr.h
+--- linux-2.6.29.owrt/include/linux/nfs_xdr.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nfs_xdr.h      2009-05-10 23:48:29.000000000 +0200
+@@ -406,8 +406,6 @@
+       int                     mask;
+       struct posix_acl *      acl_access;
+       struct posix_acl *      acl_default;
+-      size_t                  len;
+-      unsigned int            npages;
+       struct page **          pages;
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/nubus.h linux-2.6.29-rc3.owrt/include/linux/nubus.h
+--- linux-2.6.29.owrt/include/linux/nubus.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/nubus.h        2009-05-10 23:48:29.000000000 +0200
+@@ -12,7 +12,6 @@
+ #ifndef LINUX_NUBUS_H
+ #define LINUX_NUBUS_H
+-#include <linux/types.h>
+ #ifdef __KERNEL__
+ #include <asm/nubus.h>
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/pci.h linux-2.6.29-rc3.owrt/include/linux/pci.h
+--- linux-2.6.29.owrt/include/linux/pci.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/pci.h  2009-05-10 23:48:29.000000000 +0200
+@@ -684,7 +684,7 @@
+ void pci_disable_rom(struct pci_dev *pdev);
+ void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
+ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
+-size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
++size_t pci_get_rom_size(void __iomem *rom, size_t size);
+ /* Power management related routines */
+ int pci_save_state(struct pci_dev *dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/pci_ids.h linux-2.6.29-rc3.owrt/include/linux/pci_ids.h
+--- linux-2.6.29.owrt/include/linux/pci_ids.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/pci_ids.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1312,7 +1312,6 @@
+ #define PCI_DEVICE_ID_VIA_VT3351      0x0351
+ #define PCI_DEVICE_ID_VIA_VT3364      0x0364
+ #define PCI_DEVICE_ID_VIA_8371_0      0x0391
+-#define PCI_DEVICE_ID_VIA_6415                0x0415
+ #define PCI_DEVICE_ID_VIA_8501_0      0x0501
+ #define PCI_DEVICE_ID_VIA_82C561      0x0561
+ #define PCI_DEVICE_ID_VIA_82C586_1    0x0571
+@@ -1445,7 +1444,6 @@
+ #define PCI_DEVICE_ID_DIGI_DF_M_E     0x0071
+ #define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A        0x0072
+ #define PCI_DEVICE_ID_DIGI_DF_M_A     0x0073
+-#define PCI_DEVICE_ID_DIGI_NEO_8      0x00B1
+ #define PCI_DEVICE_ID_NEO_2DB9          0x00C8
+ #define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
+ #define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
+@@ -2323,9 +2321,6 @@
+ #define PCI_DEVICE_ID_INTEL_82378     0x0484
+ #define PCI_DEVICE_ID_INTEL_I960      0x0960
+ #define PCI_DEVICE_ID_INTEL_I960RM    0x0962
+-#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
+-#define PCI_DEVICE_ID_INTEL_82573E_SOL        0x1085
+-#define PCI_DEVICE_ID_INTEL_82573L_SOL        0x108F
+ #define PCI_DEVICE_ID_INTEL_82815_MC  0x1130
+ #define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
+ #define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
+@@ -2430,7 +2425,6 @@
+ #define PCI_DEVICE_ID_INTEL_ICH7_0    0x27b8
+ #define PCI_DEVICE_ID_INTEL_ICH7_1    0x27b9
+ #define PCI_DEVICE_ID_INTEL_ICH7_30   0x27b0
+-#define PCI_DEVICE_ID_INTEL_TGP_LPC   0x27bc
+ #define PCI_DEVICE_ID_INTEL_ICH7_31   0x27bd
+ #define PCI_DEVICE_ID_INTEL_ICH7_17   0x27da
+ #define PCI_DEVICE_ID_INTEL_ICH7_19   0x27dd
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/phonet.h linux-2.6.29-rc3.owrt/include/linux/phonet.h
+--- linux-2.6.29.owrt/include/linux/phonet.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/phonet.h       2009-05-10 23:48:29.000000000 +0200
+@@ -23,8 +23,6 @@
+ #ifndef LINUX_PHONET_H
+ #define LINUX_PHONET_H
+-#include <linux/types.h>
+-
+ /* Automatic protocol selection */
+ #define PN_PROTO_TRANSPORT    0
+ /* Phonet datagram socket */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/pkt_cls.h linux-2.6.29-rc3.owrt/include/linux/pkt_cls.h
+--- linux-2.6.29.owrt/include/linux/pkt_cls.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/pkt_cls.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_PKT_CLS_H
+ #define __LINUX_PKT_CLS_H
+-#include <linux/types.h>
+ #include <linux/pkt_sched.h>
+ /* I think i could have done better macros ; for now this is stolen from
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/pkt_sched.h linux-2.6.29-rc3.owrt/include/linux/pkt_sched.h
+--- linux-2.6.29.owrt/include/linux/pkt_sched.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/pkt_sched.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef __LINUX_PKT_SCHED_H
+ #define __LINUX_PKT_SCHED_H
+-#include <linux/types.h>
+-
+ /* Logical priority bands not depending on specific packet scheduler.
+    Every scheduler will map them to real traffic classes, if it has
+    no more precise mechanism to classify packets.
+@@ -544,7 +542,7 @@
+ struct tc_drr_stats
+ {
+-      __u32   deficit;
++      u32     deficit;
+ };
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/pm.h linux-2.6.29-rc3.owrt/include/linux/pm.h
+--- linux-2.6.29.owrt/include/linux/pm.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/pm.h   2009-05-10 23:48:29.000000000 +0200
+@@ -381,12 +381,10 @@
+ #ifdef CONFIG_PM_SLEEP
+ extern void device_pm_lock(void);
+-extern int sysdev_resume(void);
+ extern void device_power_up(pm_message_t state);
+ extern void device_resume(pm_message_t state);
+ extern void device_pm_unlock(void);
+-extern int sysdev_suspend(pm_message_t state);
+ extern int device_power_down(pm_message_t state);
+ extern int device_suspend(pm_message_t state);
+ extern int device_prepare_suspend(pm_message_t state);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/ppp_defs.h linux-2.6.29-rc3.owrt/include/linux/ppp_defs.h
+--- linux-2.6.29.owrt/include/linux/ppp_defs.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/ppp_defs.h     2009-05-10 23:48:29.000000000 +0200
+@@ -25,8 +25,6 @@
+  * OR MODIFICATIONS.
+  */
+-#include <linux/types.h>
+-
+ /*
+  *  ==FILEVERSION 20000114==
+  *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/raid/md_p.h linux-2.6.29-rc3.owrt/include/linux/raid/md_p.h
+--- linux-2.6.29.owrt/include/linux/raid/md_p.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/raid/md_p.h    2009-05-10 23:48:29.000000000 +0200
+@@ -15,8 +15,6 @@
+ #ifndef _MD_P_H
+ #define _MD_P_H
+-#include <linux/types.h>
+-
+ /*
+  * RAID superblock.
+  *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/random.h linux-2.6.29-rc3.owrt/include/linux/random.h
+--- linux-2.6.29.owrt/include/linux/random.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/random.h       2009-05-10 23:48:29.000000000 +0200
+@@ -7,7 +7,6 @@
+ #ifndef _LINUX_RANDOM_H
+ #define _LINUX_RANDOM_H
+-#include <linux/types.h>
+ #include <linux/ioctl.h>
+ #include <linux/irqnr.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/rcuclassic.h linux-2.6.29-rc3.owrt/include/linux/rcuclassic.h
+--- linux-2.6.29.owrt/include/linux/rcuclassic.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/rcuclassic.h   2009-05-10 23:48:29.000000000 +0200
+@@ -181,10 +181,4 @@
+ #define rcu_enter_nohz()      do { } while (0)
+ #define rcu_exit_nohz()               do { } while (0)
+-/* A context switch is a grace period for rcuclassic. */
+-static inline int rcu_blocking_is_gp(void)
+-{
+-      return num_online_cpus() == 1;
+-}
+-
+ #endif /* __LINUX_RCUCLASSIC_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/rcupdate.h linux-2.6.29-rc3.owrt/include/linux/rcupdate.h
+--- linux-2.6.29.owrt/include/linux/rcupdate.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/rcupdate.h     2009-05-10 23:48:29.000000000 +0200
+@@ -52,9 +52,6 @@
+       void (*func)(struct rcu_head *head);
+ };
+-/* Internal to kernel, but needed by rcupreempt.h. */
+-extern int rcu_scheduler_active;
+-
+ #if defined(CONFIG_CLASSIC_RCU)
+ #include <linux/rcuclassic.h>
+ #elif defined(CONFIG_TREE_RCU)
+@@ -268,7 +265,6 @@
+ /* Internal to kernel */
+ extern void rcu_init(void);
+-extern void rcu_scheduler_starting(void);
+ extern int rcu_needs_cpu(int cpu);
+ #endif /* __LINUX_RCUPDATE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/rcupreempt.h linux-2.6.29-rc3.owrt/include/linux/rcupreempt.h
+--- linux-2.6.29.owrt/include/linux/rcupreempt.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/rcupreempt.h   2009-05-10 23:48:29.000000000 +0200
+@@ -142,19 +142,4 @@
+ #define rcu_exit_nohz()               do { } while (0)
+ #endif /* CONFIG_NO_HZ */
+-/*
+- * A context switch is a grace period for rcupreempt synchronize_rcu()
+- * only during early boot, before the scheduler has been initialized.
+- * So, how the heck do we get a context switch?  Well, if the caller
+- * invokes synchronize_rcu(), they are willing to accept a context
+- * switch, so we simply pretend that one happened.
+- *
+- * After boot, there might be a blocked or preempted task in an RCU
+- * read-side critical section, so we cannot then take the fastpath.
+- */
+-static inline int rcu_blocking_is_gp(void)
+-{
+-      return num_online_cpus() == 1 && !rcu_scheduler_active;
+-}
+-
+ #endif /* __LINUX_RCUPREEMPT_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/rcutree.h linux-2.6.29-rc3.owrt/include/linux/rcutree.h
+--- linux-2.6.29.owrt/include/linux/rcutree.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/rcutree.h      2009-05-10 23:48:29.000000000 +0200
+@@ -326,10 +326,4 @@
+ }
+ #endif /* CONFIG_NO_HZ */
+-/* A context switch is a grace period for rcutree. */
+-static inline int rcu_blocking_is_gp(void)
+-{
+-      return num_online_cpus() == 1;
+-}
+-
+ #endif /* __LINUX_RCUTREE_H */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/rtnetlink.h linux-2.6.29-rc3.owrt/include/linux/rtnetlink.h
+--- linux-2.6.29.owrt/include/linux/rtnetlink.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/rtnetlink.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_RTNETLINK_H
+ #define __LINUX_RTNETLINK_H
+-#include <linux/types.h>
+ #include <linux/netlink.h>
+ #include <linux/if_link.h>
+ #include <linux/if_addr.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/sched.h linux-2.6.29-rc3.owrt/include/linux/sched.h
+--- linux-2.6.29.owrt/include/linux/sched.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/sched.h        2009-05-10 23:48:29.000000000 +0200
+@@ -453,33 +453,23 @@
+       cputime_t utime;
+       cputime_t stime;
+       unsigned long long sum_exec_runtime;
++      spinlock_t lock;
+ };
+ /* Alternate field names when used to cache expirations. */
+ #define prof_exp      stime
+ #define virt_exp      utime
+ #define sched_exp     sum_exec_runtime
+-#define INIT_CPUTIME  \
+-      (struct task_cputime) {                                 \
+-              .utime = cputime_zero,                          \
+-              .stime = cputime_zero,                          \
+-              .sum_exec_runtime = 0,                          \
+-      }
+-
+ /**
+- * struct thread_group_cputimer - thread group interval timer counts
+- * @cputime:          thread group interval timers.
+- * @running:          non-zero when there are timers running and
+- *                    @cputime receives updates.
+- * @lock:             lock for fields in this struct.
++ * struct thread_group_cputime - thread group interval timer counts
++ * @totals:           thread group interval timers; substructure for
++ *                    uniprocessor kernel, per-cpu for SMP kernel.
+  *
+  * This structure contains the version of task_cputime, above, that is
+- * used for thread group CPU timer calculations.
++ * used for thread group CPU clock calculations.
+  */
+-struct thread_group_cputimer {
+-      struct task_cputime cputime;
+-      int running;
+-      spinlock_t lock;
++struct thread_group_cputime {
++      struct task_cputime totals;
+ };
+ /*
+@@ -528,10 +518,10 @@
+       cputime_t it_prof_incr, it_virt_incr;
+       /*
+-       * Thread group totals for process CPU timers.
+-       * See thread_group_cputimer(), et al, for details.
++       * Thread group totals for process CPU clocks.
++       * See thread_group_cputime(), et al, for details.
+        */
+-      struct thread_group_cputimer cputimer;
++      struct thread_group_cputime cputime;
+       /* Earliest-expiration cache. */
+       struct task_cputime cputime_expires;
+@@ -568,7 +558,7 @@
+        * Live threads maintain their own counters and add to these
+        * in __exit_signal, except for the group leader.
+        */
+-      cputime_t utime, stime, cutime, cstime;
++      cputime_t cutime, cstime;
+       cputime_t gtime;
+       cputime_t cgtime;
+       unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
+@@ -577,14 +567,6 @@
+       struct task_io_accounting ioac;
+       /*
+-       * Cumulative ns of schedule CPU time fo dead threads in the
+-       * group, not including a zombie group leader, (This only differs
+-       * from jiffies_to_ns(utime + stime) if sched_clock uses something
+-       * other than jiffies.)
+-       */
+-      unsigned long long sum_sched_runtime;
+-
+-      /*
+        * We don't bother to synchronize most readers of this at all,
+        * because there is no reader checking a limit that actually needs
+        * to get both rlim_cur and rlim_max atomically, and either one
+@@ -648,6 +630,7 @@
+       atomic_t inotify_devs;  /* How many inotify devs does this user have opened? */
+ #endif
+ #ifdef CONFIG_EPOLL
++      atomic_t epoll_devs;    /* The number of epoll descriptors currently open */
+       atomic_t epoll_watches; /* The number of file descriptors currently watched */
+ #endif
+ #ifdef CONFIG_POSIX_MQUEUE
+@@ -1419,9 +1402,6 @@
+ #endif
+ };
+-/* Future-safe accessor for struct task_struct's cpus_allowed. */
+-#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed)
+-
+ /*
+  * Priority of a process goes from 0..MAX_PRIO-1, valid RT
+  * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
+@@ -2203,14 +2183,27 @@
+ /*
+  * Thread group CPU time accounting.
+  */
+-void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times);
+-void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times);
++
++static inline
++void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
++{
++      struct task_cputime *totals = &tsk->signal->cputime.totals;
++      unsigned long flags;
++
++      spin_lock_irqsave(&totals->lock, flags);
++      *times = *totals;
++      spin_unlock_irqrestore(&totals->lock, flags);
++}
+ static inline void thread_group_cputime_init(struct signal_struct *sig)
+ {
+-      sig->cputimer.cputime = INIT_CPUTIME;
+-      spin_lock_init(&sig->cputimer.lock);
+-      sig->cputimer.running = 0;
++      sig->cputime.totals = (struct task_cputime){
++              .utime = cputime_zero,
++              .stime = cputime_zero,
++              .sum_exec_runtime = 0,
++      };
++
++      spin_lock_init(&sig->cputime.totals.lock);
+ }
+ static inline void thread_group_cputime_free(struct signal_struct *sig)
+@@ -2294,13 +2287,9 @@
+ extern int sched_group_set_rt_period(struct task_group *tg,
+                                     long rt_period_us);
+ extern long sched_group_rt_period(struct task_group *tg);
+-extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
+ #endif
+ #endif
+-extern int task_can_switch_user(struct user_struct *up,
+-                                      struct task_struct *tsk);
+-
+ #ifdef CONFIG_TASK_XACCT
+ static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/seq_file.h linux-2.6.29-rc3.owrt/include/linux/seq_file.h
+--- linux-2.6.29.owrt/include/linux/seq_file.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/seq_file.h     2009-05-10 23:48:29.000000000 +0200
+@@ -19,7 +19,6 @@
+       size_t from;
+       size_t count;
+       loff_t index;
+-      loff_t read_pos;
+       u64 version;
+       struct mutex lock;
+       const struct seq_operations *op;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/serial_core.h linux-2.6.29-rc3.owrt/include/linux/serial_core.h
+--- linux-2.6.29.owrt/include/linux/serial_core.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/serial_core.h  2009-05-10 23:48:29.000000000 +0200
+@@ -296,7 +296,6 @@
+ #define UPF_HARDPPS_CD                ((__force upf_t) (1 << 11))
+ #define UPF_LOW_LATENCY               ((__force upf_t) (1 << 13))
+ #define UPF_BUGGY_UART                ((__force upf_t) (1 << 14))
+-#define UPF_NO_TXEN_TEST      ((__force upf_t) (1 << 15))
+ #define UPF_MAGIC_MULTIPLIER  ((__force upf_t) (1 << 16))
+ #define UPF_CONS_FLOW         ((__force upf_t) (1 << 23))
+ #define UPF_SHARE_IRQ         ((__force upf_t) (1 << 24))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/serio.h linux-2.6.29-rc3.owrt/include/linux/serio.h
+--- linux-2.6.29.owrt/include/linux/serio.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/serio.h        2009-05-10 23:48:29.000000000 +0200
+@@ -212,7 +212,7 @@
+ #define SERIO_FUJITSU 0x35
+ #define SERIO_ZHENHUA 0x36
+ #define SERIO_INEXIO  0x37
+-#define SERIO_TOUCHIT213      0x38
++#define SERIO_TOUCHIT213      0x37
+ #define SERIO_W8001   0x39
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/signalfd.h linux-2.6.29-rc3.owrt/include/linux/signalfd.h
+--- linux-2.6.29.owrt/include/linux/signalfd.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/signalfd.h     2009-05-10 23:48:29.000000000 +0200
+@@ -8,7 +8,6 @@
+ #ifndef _LINUX_SIGNALFD_H
+ #define _LINUX_SIGNALFD_H
+-#include <linux/types.h>
+ /* For O_CLOEXEC and O_NONBLOCK */
+ #include <linux/fcntl.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/skbuff.h linux-2.6.29-rc3.owrt/include/linux/skbuff.h
+--- linux-2.6.29.owrt/include/linux/skbuff.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/skbuff.h       2009-05-10 23:48:29.000000000 +0200
+@@ -434,6 +434,15 @@
+                                    void *here);
+ extern void         skb_under_panic(struct sk_buff *skb, int len,
+                                     void *here);
++extern void         skb_truesize_bug(struct sk_buff *skb);
++
++static inline void skb_truesize_check(struct sk_buff *skb)
++{
++      int len = sizeof(struct sk_buff) + skb->len;
++
++      if (unlikely((int)skb->truesize < len))
++              skb_truesize_bug(skb);
++}
+ extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+                       int getfrag(void *from, char *to, int offset,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/slab_def.h linux-2.6.29-rc3.owrt/include/linux/slab_def.h
+--- linux-2.6.29.owrt/include/linux/slab_def.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/slab_def.h     2009-05-10 23:48:29.000000000 +0200
+@@ -43,7 +43,10 @@
+                       i++;
+ #include <linux/kmalloc_sizes.h>
+ #undef CACHE
+-              return NULL;
++              {
++                      extern void __you_cannot_kmalloc_that_much(void);
++                      __you_cannot_kmalloc_that_much();
++              }
+ found:
+ #ifdef CONFIG_ZONE_DMA
+               if (flags & GFP_DMA)
+@@ -74,7 +77,10 @@
+                       i++;
+ #include <linux/kmalloc_sizes.h>
+ #undef CACHE
+-              return NULL;
++              {
++                      extern void __you_cannot_kmalloc_that_much(void);
++                      __you_cannot_kmalloc_that_much();
++              }
+ found:
+ #ifdef CONFIG_ZONE_DMA
+               if (flags & GFP_DMA)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/slab.h linux-2.6.29-rc3.owrt/include/linux/slab.h
+--- linux-2.6.29.owrt/include/linux/slab.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/slab.h 2009-05-10 23:48:29.000000000 +0200
+@@ -127,7 +127,6 @@
+ void * __must_check __krealloc(const void *, size_t, gfp_t);
+ void * __must_check krealloc(const void *, size_t, gfp_t);
+ void kfree(const void *);
+-void kzfree(const void *);
+ size_t ksize(const void *);
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/soundcard.h linux-2.6.29-rc3.owrt/include/linux/soundcard.h
+--- linux-2.6.29.owrt/include/linux/soundcard.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/soundcard.h    2009-05-10 23:48:29.000000000 +0200
+@@ -1045,36 +1045,50 @@
+  */
+ #define LOCL_STARTAUDIO               1
+-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
++#if (!defined(__KERNEL__) && !defined(KERNEL) && !defined(INKERNEL) && !defined(_KERNEL)) || defined(USE_SEQ_MACROS) 
+ /*
+  *    Some convenience macros to simplify programming of the
+  *    /dev/sequencer interface
+  *
+- *    This is a legacy interface for applications written against
+- *    the OSSlib-3.8 style interface. It is no longer possible
+- *    to actually link against OSSlib with this header, but we
+- *    still provide these macros for programs using them.
+- *
+- *    If you want to use OSSlib, it is recommended that you get
+- *    the GPL version of OSS-4.x and build against that version
+- *    of the header.
+- *
+- *    We redefine the extern keyword so that make headers_check
+- *    does not complain about SEQ_USE_EXTBUF.
++ *    These macros define the API which should be used when possible.
+  */
+ #define SEQ_DECLAREBUF()              SEQ_USE_EXTBUF()
+ void seqbuf_dump(void);       /* This function must be provided by programs */
+-#define SEQ_PM_DEFINES int __foo_bar___
+-
+-#define SEQ_LOAD_GMINSTR(dev, instr)
+-#define SEQ_LOAD_GMDRUM(dev, drum)
++extern int OSS_init(int seqfd, int buflen);
++extern void OSS_seqbuf_dump(int fd, unsigned char *buf, int buflen);
++extern void OSS_seq_advbuf(int len, int fd, unsigned char *buf, int buflen);
++extern void OSS_seq_needbuf(int len, int fd, unsigned char *buf, int buflen);
++extern void OSS_patch_caching(int dev, int chn, int patch,
++                            int fd, unsigned char *buf, int buflen);
++extern void OSS_drum_caching(int dev, int chn, int patch,
++                            int fd, unsigned char *buf, int buflen);
++extern void OSS_write_patch(int fd, unsigned char *buf, int len);
++extern int OSS_write_patch2(int fd, unsigned char *buf, int len);
+-#define _SEQ_EXTERN extern
+-#define SEQ_USE_EXTBUF() \
+-              _SEQ_EXTERN unsigned char _seqbuf[]; \
+-              _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
++#define SEQ_PM_DEFINES int __foo_bar___
++#ifdef OSSLIB
++#  define SEQ_USE_EXTBUF() \
++              extern unsigned char *_seqbuf; \
++              extern int _seqbuflen;extern int _seqbufptr
++#  define SEQ_DEFINEBUF(len) SEQ_USE_EXTBUF();static int _requested_seqbuflen=len
++#  define _SEQ_ADVBUF(len) OSS_seq_advbuf(len, seqfd, _seqbuf, _seqbuflen)
++#  define _SEQ_NEEDBUF(len) OSS_seq_needbuf(len, seqfd, _seqbuf, _seqbuflen)
++#  define SEQ_DUMPBUF() OSS_seqbuf_dump(seqfd, _seqbuf, _seqbuflen)
++
++#  define SEQ_LOAD_GMINSTR(dev, instr) \
++              OSS_patch_caching(dev, -1, instr, seqfd, _seqbuf, _seqbuflen)
++#  define SEQ_LOAD_GMDRUM(dev, drum) \
++              OSS_drum_caching(dev, -1, drum, seqfd, _seqbuf, _seqbuflen)
++#else /* !OSSLIB */
++
++#  define SEQ_LOAD_GMINSTR(dev, instr)
++#  define SEQ_LOAD_GMDRUM(dev, drum)
++
++#  define SEQ_USE_EXTBUF() \
++              extern unsigned char _seqbuf[]; \
++              extern int _seqbuflen;extern int _seqbufptr
+ #ifndef USE_SIMPLE_MACROS
+ /* Sample seqbuf_dump() implementation:
+@@ -1117,6 +1131,7 @@
+  */
+ #define _SEQ_NEEDBUF(len)     /* empty */
+ #endif
++#endif /* !OSSLIB */
+ #define SEQ_VOLUME_MODE(dev, mode)    {_SEQ_NEEDBUF(8);\
+                                       _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+@@ -1200,8 +1215,14 @@
+               _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+ #define SEQ_SET_PATCH SEQ_PGM_CHANGE
+-#define SEQ_PGM_CHANGE(dev, chn, patch) \
++#ifdef OSSLIB
++#   define SEQ_PGM_CHANGE(dev, chn, patch) \
++              {OSS_patch_caching(dev, chn, patch, seqfd, _seqbuf, _seqbuflen); \
++               _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0);}
++#else
++#   define SEQ_PGM_CHANGE(dev, chn, patch) \
+               _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
++#endif
+ #define SEQ_CONTROL(dev, chn, controller, value) \
+               _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+@@ -1279,12 +1300,19 @@
+ /*
+  * Patch loading.
+  */
+-#define SEQ_WRPATCH(patchx, len) \
++#ifdef OSSLIB
++#   define SEQ_WRPATCH(patchx, len) \
++              OSS_write_patch(seqfd, (char*)(patchx), len)
++#   define SEQ_WRPATCH2(patchx, len) \
++              OSS_write_patch2(seqfd, (char*)(patchx), len)
++#else
++#   define SEQ_WRPATCH(patchx, len) \
+               {if (_seqbufptr) SEQ_DUMPBUF();\
+                if (write(seqfd, (char*)(patchx), len)==-1) \
+                   perror("Write patch: /dev/sequencer");}
+-#define SEQ_WRPATCH2(patchx, len) \
++#   define SEQ_WRPATCH2(patchx, len) \
+               (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
++#endif
+ #endif
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/sound.h linux-2.6.29-rc3.owrt/include/linux/sound.h
+--- linux-2.6.29.owrt/include/linux/sound.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/sound.h        2009-05-10 23:48:29.000000000 +0200
+@@ -25,7 +25,6 @@
+ #define SND_DEV_AMIDI         13      /* Like /dev/midi (obsolete) */
+ #define SND_DEV_ADMMIDI               14      /* Like /dev/dmmidi (onsolete) */
+-#ifdef __KERNEL__
+ /*
+  *    Sound core interface functions
+  */
+@@ -41,4 +40,3 @@
+ extern void unregister_sound_mixer(int unit);
+ extern void unregister_sound_midi(int unit);
+ extern void unregister_sound_dsp(int unit);
+-#endif /* __KERNEL__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/spi/spi_bitbang.h linux-2.6.29-rc3.owrt/include/linux/spi/spi_bitbang.h
+--- linux-2.6.29.owrt/include/linux/spi/spi_bitbang.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/spi/spi_bitbang.h      2009-05-10 23:48:29.000000000 +0200
+@@ -83,13 +83,6 @@
+  *  int getmiso(struct spi_device *);
+  *  void spidelay(unsigned);
+  *
+- * setsck()'s is_on parameter is a zero/nonzero boolean.
+- *
+- * setmosi()'s is_on parameter is a zero/nonzero boolean.
+- *
+- * getmiso() is required to return 0 or 1 only. Any other value is invalid
+- * and will result in improper operation.
+- *
+  * A non-inlined routine would call bitbang_txrx_*() routines.  The
+  * main loop could easily compile down to a handful of instructions,
+  * especially if the delay is a NOP (to run at peak speed).
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/spi/spidev.h linux-2.6.29-rc3.owrt/include/linux/spi/spidev.h
+--- linux-2.6.29.owrt/include/linux/spi/spidev.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/spi/spidev.h   2009-05-10 23:48:29.000000000 +0200
+@@ -22,7 +22,6 @@
+ #ifndef SPIDEV_H
+ #define SPIDEV_H
+-#include <linux/types.h>
+ /* User space versions of kernel symbols for SPI clocking modes,
+  * matching <linux/spi/spi.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/spinlock.h linux-2.6.29-rc3.owrt/include/linux/spinlock.h
+--- linux-2.6.29.owrt/include/linux/spinlock.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/spinlock.h     2009-05-10 23:48:29.000000000 +0200
+@@ -124,12 +124,7 @@
+ #ifdef CONFIG_GENERIC_LOCKBREAK
+ #define spin_is_contended(lock) ((lock)->break_lock)
+ #else
+-
+-#ifdef __raw_spin_is_contended
+ #define spin_is_contended(lock)       __raw_spin_is_contended(&(lock)->raw_lock)
+-#else
+-#define spin_is_contended(lock)       (((void)(lock), 0))
+-#endif /*__raw_spin_is_contended*/
+ #endif
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/synclink.h linux-2.6.29-rc3.owrt/include/linux/synclink.h
+--- linux-2.6.29.owrt/include/linux/synclink.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/synclink.h     2009-05-10 23:48:29.000000000 +0200
+@@ -13,8 +13,6 @@
+ #define _SYNCLINK_H_
+ #define SYNCLINK_H_VERSION 3.6
+-#include <linux/types.h>
+-
+ #define BIT0  0x0001
+ #define BIT1  0x0002
+ #define BIT2  0x0004
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/syscalls.h linux-2.6.29-rc3.owrt/include/linux/syscalls.h
+--- linux-2.6.29.owrt/include/linux/syscalls.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/syscalls.h     2009-05-10 23:48:29.000000000 +0200
+@@ -95,47 +95,42 @@
+ #define __SC_TEST5(t5, a5, ...)       __SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
+ #define __SC_TEST6(t6, a6, ...)       __SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+-#define SYSCALL_DEFINE0(name)    asmlinkage long sys_##name(void)
+-#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
+-#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
+-#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
+-#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
+-#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
+-#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
++#define SYSCALL_DEFINE0(name)   asmlinkage long sys_##name(void)
++#define SYSCALL_DEFINE1(...)    SYSCALL_DEFINEx(1, __VA_ARGS__)
++#define SYSCALL_DEFINE2(...)    SYSCALL_DEFINEx(2, __VA_ARGS__)
++#define SYSCALL_DEFINE3(...)    SYSCALL_DEFINEx(3, __VA_ARGS__)
++#define SYSCALL_DEFINE4(...)    SYSCALL_DEFINEx(4, __VA_ARGS__)
++#define SYSCALL_DEFINE5(...)    SYSCALL_DEFINEx(5, __VA_ARGS__)
++#define SYSCALL_DEFINE6(...)    SYSCALL_DEFINEx(6, __VA_ARGS__)
+ #ifdef CONFIG_PPC64
+ #define SYSCALL_ALIAS(alias, name)                                    \
+       asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"      \
+            "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
+ #else
+-#ifdef CONFIG_ALPHA
+-#define SYSCALL_ALIAS(alias, name)                                    \
+-      asm ( #alias " = " #name "\n\t.globl " #alias)
+-#else
+ #define SYSCALL_ALIAS(alias, name)                                    \
+       asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+ #endif
+-#endif
+ #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+ #define SYSCALL_DEFINE(name) static inline long SYSC_##name
+ #define SYSCALL_DEFINEx(x, name, ...)                                 \
+-      asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__));           \
+-      static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__));       \
+-      asmlinkage long SyS##name(__SC_LONG##x(__VA_ARGS__))            \
++      asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__));          \
++      static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__));      \
++      asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__))           \
+       {                                                               \
+               __SC_TEST##x(__VA_ARGS__);                              \
+-              return (long) SYSC##name(__SC_CAST##x(__VA_ARGS__));    \
++              return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__));   \
+       }                                                               \
+-      SYSCALL_ALIAS(sys##name, SyS##name);                            \
+-      static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__))
++      SYSCALL_ALIAS(sys_##name, SyS_##name);                          \
++      static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__))
+ #else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+ #define SYSCALL_DEFINE(name) asmlinkage long sys_##name
+ #define SYSCALL_DEFINEx(x, name, ...)                                 \
+-      asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__))
++      asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__))
+ #endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/taskstats.h linux-2.6.29-rc3.owrt/include/linux/taskstats.h
+--- linux-2.6.29.owrt/include/linux/taskstats.h        2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/taskstats.h    2009-05-10 23:48:29.000000000 +0200
+@@ -16,8 +16,6 @@
+ #ifndef _LINUX_TASKSTATS_H
+ #define _LINUX_TASKSTATS_H
+-#include <linux/types.h>
+-
+ /* Format for per-task data returned to userland when
+  *    - a task exits
+  *    - listener requests stats for a task
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_act/tc_gact.h linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_gact.h
+--- linux-2.6.29.owrt/include/linux/tc_act/tc_gact.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_gact.h       2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_GACT_H
+ #define __LINUX_TC_GACT_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ #define TCA_ACT_GACT 5
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_act/tc_mirred.h linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_mirred.h
+--- linux-2.6.29.owrt/include/linux/tc_act/tc_mirred.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_mirred.h     2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_MIR_H
+ #define __LINUX_TC_MIR_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ #define TCA_ACT_MIRRED 8
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_act/tc_pedit.h linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_pedit.h
+--- linux-2.6.29.owrt/include/linux/tc_act/tc_pedit.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_act/tc_pedit.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_PED_H
+ #define __LINUX_TC_PED_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ #define TCA_ACT_PEDIT 7
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_cmp.h linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_cmp.h
+--- linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_cmp.h      2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_cmp.h  2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_EM_CMP_H
+ #define __LINUX_TC_EM_CMP_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ struct tcf_em_cmp
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_meta.h linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_meta.h
+--- linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_meta.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_meta.h 2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_EM_META_H
+ #define __LINUX_TC_EM_META_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ enum
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_nbyte.h linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_nbyte.h
+--- linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_nbyte.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_nbyte.h        2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_EM_NBYTE_H
+ #define __LINUX_TC_EM_NBYTE_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ struct tcf_em_nbyte
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_text.h linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_text.h
+--- linux-2.6.29.owrt/include/linux/tc_ematch/tc_em_text.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/tc_ematch/tc_em_text.h 2009-05-10 23:48:29.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef __LINUX_TC_EM_TEXT_H
+ #define __LINUX_TC_EM_TEXT_H
+-#include <linux/types.h>
+ #include <linux/pkt_cls.h>
+ #define TC_EM_TEXT_ALGOSIZ    16
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/timerfd.h linux-2.6.29-rc3.owrt/include/linux/timerfd.h
+--- linux-2.6.29.owrt/include/linux/timerfd.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/timerfd.h      2009-05-10 23:48:29.000000000 +0200
+@@ -11,21 +11,13 @@
+ /* For O_CLOEXEC and O_NONBLOCK */
+ #include <linux/fcntl.h>
+-/*
+- * CAREFUL: Check include/asm-generic/fcntl.h when defining
+- * new flags, since they might collide with O_* ones. We want
+- * to re-use O_* flags that couldn't possibly have a meaning
+- * from eventfd, in order to leave a free define-space for
+- * shared O_* flags.
+- */
++/* Flags for timerfd_settime.  */
+ #define TFD_TIMER_ABSTIME (1 << 0)
++
++/* Flags for timerfd_create.  */
+ #define TFD_CLOEXEC O_CLOEXEC
+ #define TFD_NONBLOCK O_NONBLOCK
+-#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK)
+-/* Flags for timerfd_create.  */
+-#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS
+-/* Flags for timerfd_settime.  */
+-#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME
+ #endif /* _LINUX_TIMERFD_H */
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/usb/cdc.h linux-2.6.29-rc3.owrt/include/linux/usb/cdc.h
+--- linux-2.6.29.owrt/include/linux/usb/cdc.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/usb/cdc.h      2009-05-10 23:48:29.000000000 +0200
+@@ -9,8 +9,6 @@
+ #ifndef __LINUX_USB_CDC_H
+ #define __LINUX_USB_CDC_H
+-#include <linux/types.h>
+-
+ #define USB_CDC_SUBCLASS_ACM                  0x02
+ #define USB_CDC_SUBCLASS_ETHERNET             0x06
+ #define USB_CDC_SUBCLASS_WHCM                 0x08
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/usb/gadgetfs.h linux-2.6.29-rc3.owrt/include/linux/usb/gadgetfs.h
+--- linux-2.6.29.owrt/include/linux/usb/gadgetfs.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/usb/gadgetfs.h 2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,7 @@
+ #ifndef __LINUX_USB_GADGETFS_H
+ #define __LINUX_USB_GADGETFS_H
+-#include <linux/types.h>
++#include <asm/types.h>
+ #include <asm/ioctl.h>
+ #include <linux/usb/ch9.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/user_namespace.h linux-2.6.29-rc3.owrt/include/linux/user_namespace.h
+--- linux-2.6.29.owrt/include/linux/user_namespace.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/user_namespace.h       2009-05-10 23:48:29.000000000 +0200
+@@ -13,7 +13,6 @@
+       struct kref             kref;
+       struct hlist_head       uidhash_table[UIDHASH_SZ];
+       struct user_struct      *creator;
+-      struct work_struct      destroyer;
+ };
+ extern struct user_namespace init_user_ns;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/video_decoder.h linux-2.6.29-rc3.owrt/include/linux/video_decoder.h
+--- linux-2.6.29.owrt/include/linux/video_decoder.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/video_decoder.h        2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _LINUX_VIDEO_DECODER_H
+ #define _LINUX_VIDEO_DECODER_H
+-#include <linux/types.h>
+-
+ #define HAVE_VIDEO_DECODER 1
+ struct video_decoder_capability { /* this name is too long */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/videodev.h linux-2.6.29-rc3.owrt/include/linux/videodev.h
+--- linux-2.6.29.owrt/include/linux/videodev.h 2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/videodev.h     2009-05-10 23:48:29.000000000 +0200
+@@ -12,7 +12,6 @@
+ #ifndef __LINUX_VIDEODEV_H
+ #define __LINUX_VIDEODEV_H
+-#include <linux/types.h>
+ #include <linux/ioctl.h>
+ #include <linux/videodev2.h>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/video_encoder.h linux-2.6.29-rc3.owrt/include/linux/video_encoder.h
+--- linux-2.6.29.owrt/include/linux/video_encoder.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/video_encoder.h        2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _LINUX_VIDEO_ENCODER_H
+ #define _LINUX_VIDEO_ENCODER_H
+-#include <linux/types.h>
+-
+ struct video_encoder_capability { /* this name is too long */
+       __u32   flags;
+ #define       VIDEO_ENCODER_PAL       1       /* can encode PAL signal */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/virtio_blk.h linux-2.6.29-rc3.owrt/include/linux/virtio_blk.h
+--- linux-2.6.29.owrt/include/linux/virtio_blk.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/virtio_blk.h   2009-05-10 23:48:29.000000000 +0200
+@@ -2,7 +2,6 @@
+ #define _LINUX_VIRTIO_BLK_H
+ /* This header is BSD licensed so anyone can use the definitions to implement
+  * compatible drivers/servers. */
+-#include <linux/types.h>
+ #include <linux/virtio_config.h>
+ /* The ID for virtio_block */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/virtio_console.h linux-2.6.29-rc3.owrt/include/linux/virtio_console.h
+--- linux-2.6.29.owrt/include/linux/virtio_console.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/virtio_console.h       2009-05-10 23:48:29.000000000 +0200
+@@ -1,6 +1,5 @@
+ #ifndef _LINUX_VIRTIO_CONSOLE_H
+ #define _LINUX_VIRTIO_CONSOLE_H
+-#include <linux/types.h>
+ #include <linux/virtio_config.h>
+ /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+  * anyone can use the definitions to implement compatible drivers/servers. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/virtio_net.h linux-2.6.29-rc3.owrt/include/linux/virtio_net.h
+--- linux-2.6.29.owrt/include/linux/virtio_net.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/virtio_net.h   2009-05-10 23:48:29.000000000 +0200
+@@ -2,7 +2,6 @@
+ #define _LINUX_VIRTIO_NET_H
+ /* This header is BSD licensed so anyone can use the definitions to implement
+  * compatible drivers/servers. */
+-#include <linux/types.h>
+ #include <linux/virtio_config.h>
+ /* The ID for virtio_net */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/vmalloc.h linux-2.6.29-rc3.owrt/include/linux/vmalloc.h
+--- linux-2.6.29.owrt/include/linux/vmalloc.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/vmalloc.h      2009-05-10 23:48:29.000000000 +0200
+@@ -84,10 +84,6 @@
+                                       unsigned long flags, void *caller);
+ extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
+                                       unsigned long start, unsigned long end);
+-extern struct vm_struct *__get_vm_area_caller(unsigned long size,
+-                                      unsigned long flags,
+-                                      unsigned long start, unsigned long end,
+-                                      void *caller);
+ extern struct vm_struct *get_vm_area_node(unsigned long size,
+                                         unsigned long flags, int node,
+                                         gfp_t gfp_mask);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/linux/wait.h linux-2.6.29-rc3.owrt/include/linux/wait.h
+--- linux-2.6.29.owrt/include/linux/wait.h     2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/linux/wait.h 2009-05-10 23:48:29.000000000 +0200
+@@ -132,8 +132,6 @@
+       list_del(&old->task_list);
+ }
+-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+-                      int nr_exclusive, int sync, void *key);
+ void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
+ extern void __wake_up_locked(wait_queue_head_t *q, unsigned int mode);
+ extern void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
+@@ -335,19 +333,16 @@
+       for (;;) {                                                      \
+               prepare_to_wait_exclusive(&wq, &__wait,                 \
+                                       TASK_INTERRUPTIBLE);            \
+-              if (condition) {                                        \
+-                      finish_wait(&wq, &__wait);                      \
++              if (condition)                                          \
+                       break;                                          \
+-              }                                                       \
+               if (!signal_pending(current)) {                         \
+                       schedule();                                     \
+                       continue;                                       \
+               }                                                       \
+               ret = -ERESTARTSYS;                                     \
+-              abort_exclusive_wait(&wq, &__wait,                      \
+-                              TASK_INTERRUPTIBLE, NULL);              \
+               break;                                                  \
+       }                                                               \
++      finish_wait(&wq, &__wait);                                      \
+ } while (0)
+ #define wait_event_interruptible_exclusive(wq, condition)             \
+@@ -436,8 +431,6 @@
+ void prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state);
+ void prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state);
+ void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
+-void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
+-                      unsigned int mode, void *key);
+ int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+ int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/media/v4l2-device.h linux-2.6.29-rc3.owrt/include/media/v4l2-device.h
+--- linux-2.6.29.owrt/include/media/v4l2-device.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/media/v4l2-device.h  2009-05-10 23:48:29.000000000 +0200
+@@ -94,16 +94,16 @@
+ /* Call the specified callback for all subdevs matching grp_id (if 0, then
+    match them all). Ignore any errors. Note that you cannot add or delete
+    a subdev while walking the subdevs list. */
+-#define v4l2_device_call_all(dev, grpid, o, f, args...)               \
++#define v4l2_device_call_all(dev, grp_id, o, f, args...)              \
+       __v4l2_device_call_subdevs(dev,                                 \
+-                      !(grpid) || sd->grp_id == (grpid), o, f , ##args)
++                      !(grp_id) || sd->grp_id == (grp_id), o, f , ##args)
+ /* Call the specified callback for all subdevs matching grp_id (if 0, then
+    match them all). If the callback returns an error other than 0 or
+    -ENOIOCTLCMD, then return with that error code. Note that you cannot
+    add or delete a subdev while walking the subdevs list. */
+-#define v4l2_device_call_until_err(dev, grpid, o, f, args...)                 \
++#define v4l2_device_call_until_err(dev, grp_id, o, f, args...)                \
+       __v4l2_device_call_subdevs_until_err(dev,                       \
+-                     !(grpid) || sd->grp_id == (grpid), o, f , ##args)
++                     !(grp_id) || sd->grp_id == (grp_id), o, f , ##args)
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/media/videobuf-dma-sg.h linux-2.6.29-rc3.owrt/include/media/videobuf-dma-sg.h
+--- linux-2.6.29.owrt/include/media/videobuf-dma-sg.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/media/videobuf-dma-sg.h      2009-05-10 23:48:29.000000000 +0200
+@@ -49,7 +49,7 @@
+  *    does memory allocation too using vmalloc_32().
+  *
+  * videobuf_dma_*()
+- *    see Documentation/PCI/PCI-DMA-mapping.txt, these functions to
++ *    see Documentation/DMA-mapping.txt, these functions to
+  *    basically the same.  The map function does also build a
+  *    scatterlist for the buffer (and unmap frees it ...)
+  *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/mtd/inftl-user.h linux-2.6.29-rc3.owrt/include/mtd/inftl-user.h
+--- linux-2.6.29.owrt/include/mtd/inftl-user.h 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/mtd/inftl-user.h     2009-05-10 23:48:29.000000000 +0200
+@@ -6,8 +6,6 @@
+ #ifndef __MTD_INFTL_USER_H__
+ #define __MTD_INFTL_USER_H__
+-#include <linux/types.h>
+-
+ #define       OSAK_VERSION    0x5120
+ #define       PERCENTUSED     98
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/mtd/ubi-user.h linux-2.6.29-rc3.owrt/include/mtd/ubi-user.h
+--- linux-2.6.29.owrt/include/mtd/ubi-user.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/mtd/ubi-user.h       2009-05-10 23:48:29.000000000 +0200
+@@ -40,37 +40,37 @@
+  * UBI volume creation
+  * ~~~~~~~~~~~~~~~~~~~
+  *
+- * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
++ * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character
+  * device. A &struct ubi_mkvol_req object has to be properly filled and a
+- * pointer to it has to be passed to the ioctl.
++ * pointer to it has to be passed to the IOCTL.
+  *
+  * UBI volume deletion
+  * ~~~~~~~~~~~~~~~~~~~
+  *
+- * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
++ * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character
+  * device should be used. A pointer to the 32-bit volume ID hast to be passed
+- * to the ioctl.
++ * to the IOCTL.
+  *
+  * UBI volume re-size
+  * ~~~~~~~~~~~~~~~~~~
+  *
+- * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
++ * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character
+  * device should be used. A &struct ubi_rsvol_req object has to be properly
+- * filled and a pointer to it has to be passed to the ioctl.
++ * filled and a pointer to it has to be passed to the IOCTL.
+  *
+  * UBI volumes re-name
+  * ~~~~~~~~~~~~~~~~~~~
+  *
+  * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+  * of the UBI character device should be used. A &struct ubi_rnvol_req object
+- * has to be properly filled and a pointer to it has to be passed to the ioctl.
++ * has to be properly filled and a pointer to it has to be passed to the IOCTL.
+  *
+  * UBI volume update
+  * ~~~~~~~~~~~~~~~~~
+  *
+- * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
++ * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
+  * corresponding UBI volume character device. A pointer to a 64-bit update
+- * size should be passed to the ioctl. After this, UBI expects user to write
++ * size should be passed to the IOCTL. After this, UBI expects user to write
+  * this number of bytes to the volume character device. The update is finished
+  * when the claimed number of bytes is passed. So, the volume update sequence
+  * is something like:
+@@ -80,58 +80,14 @@
+  * write(fd, buf, image_size);
+  * close(fd);
+  *
+- * Logical eraseblock erase
++ * Atomic eraseblock change
+  * ~~~~~~~~~~~~~~~~~~~~~~~~
+  *
+- * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
+- * corresponding UBI volume character device should be used. This command
+- * unmaps the requested logical eraseblock, makes sure the corresponding
+- * physical eraseblock is successfully erased, and returns.
+- *
+- * Atomic logical eraseblock change
+- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+- *
+- * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
+- * ioctl command of the corresponding UBI volume character device. A pointer to
+- * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
+- * user is expected to write the requested amount of bytes (similarly to what
+- * should be done in case of the "volume update" ioctl).
+- *
+- * Logical eraseblock map
+- * ~~~~~~~~~~~~~~~~~~~~~
+- *
+- * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
+- * ioctl command should be used. A pointer to a &struct ubi_map_req object is
+- * expected to be passed. The ioctl maps the requested logical eraseblock to
+- * a physical eraseblock and returns.  Only non-mapped logical eraseblocks can
+- * be mapped. If the logical eraseblock specified in the request is already
+- * mapped to a physical eraseblock, the ioctl fails and returns error.
+- *
+- * Logical eraseblock unmap
+- * ~~~~~~~~~~~~~~~~~~~~~~~~
+- *
+- * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
+- * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
+- * schedules corresponding physical eraseblock for erasure, and returns. Unlike
+- * the "LEB erase" command, it does not wait for the physical eraseblock being
+- * erased. Note, the side effect of this is that if an unclean reboot happens
+- * after the unmap ioctl returns, you may find the LEB mapped again to the same
+- * physical eraseblock after the UBI is run again.
+- *
+- * Check if logical eraseblock is mapped
+- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+- *
+- * To check if a logical eraseblock is mapped to a physical eraseblock, the
+- * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
+- * not mapped, and %1 if it is mapped.
+- *
+- * Set an UBI volume property
+- * ~~~~~~~~~~~~~~~~~~~~~~~~~
+- *
+- * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
+- * used. A pointer to a &struct ubi_set_prop_req object is expected to be
+- * passed. The object describes which property should be set, and to which value
+- * it should be set.
++ * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL
++ * command of the corresponding UBI volume character device. A pointer to
++ * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is
++ * expected to write the requested amount of bytes. This is similar to the
++ * "volume update" IOCTL.
+  */
+ /*
+@@ -145,7 +101,7 @@
+ /* Maximum volume name length */
+ #define UBI_MAX_VOLUME_NAME 127
+-/* ioctl commands of UBI character devices */
++/* IOCTL commands of UBI character devices */
+ #define UBI_IOC_MAGIC 'o'
+@@ -158,7 +114,7 @@
+ /* Re-name volumes */
+ #define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
+-/* ioctl commands of the UBI control character device */
++/* IOCTL commands of the UBI control character device */
+ #define UBI_CTRL_IOC_MAGIC 'o'
+@@ -167,24 +123,16 @@
+ /* Detach an MTD device */
+ #define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t)
+-/* ioctl commands of UBI volume character devices */
++/* IOCTL commands of UBI volume character devices */
+ #define UBI_VOL_IOC_MAGIC 'O'
+ /* Start UBI volume update */
+ #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
+-/* LEB erasure command, used for debugging, disabled by default */
++/* An eraseblock erasure command, used for debugging, disabled by default */
+ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
+-/* Atomic LEB change command */
++/* An atomic eraseblock change command */
+ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
+-/* Map LEB command */
+-#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
+-/* Unmap LEB command */
+-#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t)
+-/* Check if LEB is mapped command */
+-#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t)
+-/* Set an UBI volume property */
+-#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req)
+ /* Maximum MTD device name length supported by UBI */
+ #define MAX_UBI_MTD_NAME_LEN 127
+@@ -220,16 +168,6 @@
+       UBI_STATIC_VOLUME  = 4,
+ };
+-/*
+- * UBI set property ioctl constants
+- *
+- * @UBI_PROP_DIRECT_WRITE: allow / disallow user to directly write and
+- *                         erase individual eraseblocks on dynamic volumes
+- */
+-enum {
+-       UBI_PROP_DIRECT_WRITE = 1,
+-};
+-
+ /**
+  * struct ubi_attach_req - attach MTD device request.
+  * @ubi_num: UBI device number to create
+@@ -367,8 +305,8 @@
+ } __attribute__ ((packed));
+ /**
+- * struct ubi_leb_change_req - a data structure used in atomic LEB change
+- *                             requests.
++ * struct ubi_leb_change_req - a data structure used in atomic logical
++ *                             eraseblock change requests.
+  * @lnum: logical eraseblock number to change
+  * @bytes: how many bytes will be written to the logical eraseblock
+  * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+@@ -381,30 +319,4 @@
+       int8_t  padding[7];
+ } __attribute__ ((packed));
+-/**
+- * struct ubi_map_req - a data structure used in map LEB requests.
+- * @lnum: logical eraseblock number to unmap
+- * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+- * @padding: reserved for future, not used, has to be zeroed
+- */
+-struct ubi_map_req {
+-      int32_t lnum;
+-      int8_t  dtype;
+-      int8_t  padding[3];
+-} __attribute__ ((packed));
+-
+-
+-/**
+- * struct ubi_set_prop_req - a data structure used to set an ubi volume
+- *                           property.
+- * @property: property to set (%UBI_PROP_DIRECT_WRITE)
+- * @padding: reserved for future, not used, has to be zeroed
+- * @value: value to set
+- */
+-struct ubi_set_prop_req {
+-       uint8_t  property;
+-       uint8_t  padding[7];
+-       uint64_t value;
+-}  __attribute__ ((packed));
+-
+ #endif /* __UBI_USER_H__ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/net/inet_hashtables.h linux-2.6.29-rc3.owrt/include/net/inet_hashtables.h
+--- linux-2.6.29.owrt/include/net/inet_hashtables.h    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/net/inet_hashtables.h        2009-05-10 23:48:29.000000000 +0200
+@@ -182,7 +182,7 @@
+               size = 2048;
+       if (nr_pcpus >= 32)
+               size = 4096;
+-      if (sizeof(spinlock_t) != 0) {
++      if (sizeof(rwlock_t) != 0) {
+ #ifdef CONFIG_NUMA
+               if (size * sizeof(spinlock_t) > PAGE_SIZE)
+                       hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t));
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/net/netfilter/nf_conntrack_core.h linux-2.6.29-rc3.owrt/include/net/netfilter/nf_conntrack_core.h
+--- linux-2.6.29.owrt/include/net/netfilter/nf_conntrack_core.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/net/netfilter/nf_conntrack_core.h    2009-05-10 23:48:29.000000000 +0200
+@@ -59,11 +59,10 @@
+       struct nf_conn *ct = (struct nf_conn *)skb->nfct;
+       int ret = NF_ACCEPT;
+-      if (ct && ct != &nf_conntrack_untracked) {
++      if (ct) {
+               if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
+                       ret = __nf_conntrack_confirm(skb);
+-              if (likely(ret == NF_ACCEPT))
+-                      nf_ct_deliver_cached_events(ct);
++              nf_ct_deliver_cached_events(ct);
+       }
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/net/net_namespace.h linux-2.6.29-rc3.owrt/include/net/net_namespace.h
+--- linux-2.6.29.owrt/include/net/net_namespace.h      2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/net/net_namespace.h  2009-05-10 23:48:29.000000000 +0200
+@@ -109,6 +109,11 @@
+ #ifdef CONFIG_NET_NS
+ extern void __put_net(struct net *net);
++static inline int net_alive(struct net *net)
++{
++      return net && atomic_read(&net->count);
++}
++
+ static inline struct net *get_net(struct net *net)
+ {
+       atomic_inc(&net->count);
+@@ -140,6 +145,11 @@
+ }
+ #else
++static inline int net_alive(struct net *net)
++{
++      return 1;
++}
++
+ static inline struct net *get_net(struct net *net)
+ {
+       return net;
+@@ -224,23 +234,6 @@
+       void (*exit)(struct net *net);
+ };
+-/*
+- * Use these carefully.  If you implement a network device and it
+- * needs per network namespace operations use device pernet operations,
+- * otherwise use pernet subsys operations.
+- *
+- * This is critically important.  Most of the network code cleanup
+- * runs with the assumption that dev_remove_pack has been called so no
+- * new packets will arrive during and after the cleanup functions have
+- * been called.  dev_remove_pack is not per namespace so instead the
+- * guarantee of no more packets arriving in a network namespace is
+- * provided by ensuring that all network devices and all sockets have
+- * left the network namespace before the cleanup methods are called.
+- *
+- * For the longest time the ipv4 icmp code was registered as a pernet
+- * device which caused kernel oops, and panics during network
+- * namespace cleanup.   So please don't get this wrong.
+- */
+ extern int register_pernet_subsys(struct pernet_operations *);
+ extern void unregister_pernet_subsys(struct pernet_operations *);
+ extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/net/sock.h linux-2.6.29-rc3.owrt/include/net/sock.h
+--- linux-2.6.29.owrt/include/net/sock.h       2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/net/sock.h   2009-05-10 23:48:29.000000000 +0200
+@@ -860,6 +860,7 @@
+ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb)
+ {
++      skb_truesize_check(skb);
+       sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
+       sk->sk_wmem_queued -= skb->truesize;
+       sk_mem_uncharge(sk, skb->truesize);
+@@ -1307,7 +1308,7 @@
+ static inline gfp_t gfp_any(void)
+ {
+-      return in_softirq() ? GFP_ATOMIC : GFP_KERNEL;
++      return in_atomic() ? GFP_ATOMIC : GFP_KERNEL;
+ }
+ static inline long sock_rcvtimeo(const struct sock *sk, int noblock)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/scsi/fc/fc_fcoe.h linux-2.6.29-rc3.owrt/include/scsi/fc/fc_fcoe.h
+--- linux-2.6.29.owrt/include/scsi/fc/fc_fcoe.h        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/scsi/fc/fc_fcoe.h    2009-05-10 23:48:29.000000000 +0200
+@@ -31,6 +31,10 @@
+ #define       ETH_P_FCOE      0x8906          /* FCOE ether type */
+ #endif
++#ifndef ETH_P_8021Q
++#define       ETH_P_8021Q     0x8100
++#endif
++
+ /*
+  * FC_FCOE_OUI hasn't been standardized yet.   XXX TBD.
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/scsi/fc/fc_fs.h linux-2.6.29-rc3.owrt/include/scsi/fc/fc_fs.h
+--- linux-2.6.29.owrt/include/scsi/fc/fc_fs.h  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/scsi/fc/fc_fs.h      2009-05-10 23:48:29.000000000 +0200
+@@ -337,9 +337,4 @@
+       FC_RJT_VENDOR =         0xff,   /* vendor specific reject */
+ };
+-/* default timeout values */
+-
+-#define FC_DEF_E_D_TOV        2000UL
+-#define FC_DEF_R_A_TOV        10000UL
+-
+ #endif /* _FC_FS_H_ */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/scsi/libfc.h linux-2.6.29-rc3.owrt/include/scsi/libfc.h
+--- linux-2.6.29.owrt/include/scsi/libfc.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/scsi/libfc.h 2009-05-10 23:48:29.000000000 +0200
+@@ -68,6 +68,9 @@
+ /*
+  * FC HBA status
+  */
++#define FC_PAUSE                  (1 << 1)
++#define FC_LINK_UP                (1 << 0)
++
+ enum fc_lport_state {
+       LPORT_ST_NONE = 0,
+       LPORT_ST_FLOGI,
+@@ -336,17 +339,31 @@
+ struct libfc_function_template {
++      /**
++       * Mandatory Fields
++       *
++       * These handlers must be implemented by the LLD.
++       */
++
+       /*
+        * Interface to send a FC frame
+-       *
+-       * STATUS: REQUIRED
+        */
+       int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
+-      /*
+-       * Interface to send ELS/CT frames
++      /**
++       * Optional Fields
+        *
+-       * STATUS: OPTIONAL
++       * The LLD may choose to implement any of the following handlers.
++       * If LLD doesn't specify hander and leaves its pointer NULL then
++       * the default libfc function will be used for that handler.
++       */
++
++      /**
++       * ELS/CT interfaces
++       */
++
++      /*
++       * elsct_send - sends ELS/CT frame
+        */
+       struct fc_seq *(*elsct_send)(struct fc_lport *lport,
+                                    struct fc_rport *rport,
+@@ -356,6 +373,9 @@
+                                            struct fc_frame *fp,
+                                            void *arg),
+                                    void *arg, u32 timer_msec);
++      /**
++       * Exhance Manager interfaces
++       */
+       /*
+        * Send the FC frame payload using a new exchange and sequence.
+@@ -387,8 +407,6 @@
+        * timer_msec argument is specified. The timer is canceled when
+        * it fires or when the exchange is done. The exchange timeout handler
+        * is registered by EM layer.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
+                                       struct fc_frame *fp,
+@@ -400,18 +418,14 @@
+                                       void *arg, unsigned int timer_msec);
+       /*
+-       * Send a frame using an existing sequence and exchange.
+-       *
+-       * STATUS: OPTIONAL
++       * send a frame using existing sequence and exchange.
+        */
+       int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
+                       struct fc_frame *fp);
+       /*
+-       * Send an ELS response using infomation from a previous
+-       * exchange and sequence.
+-       *
+-       * STATUS: OPTIONAL
++       * Send ELS response using mainly infomation
++       * in exchange and sequence in EM layer.
+        */
+       void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
+                                struct fc_seq_els_data *els_data);
+@@ -423,8 +437,6 @@
+        * A timer_msec can be specified for abort timeout, if non-zero
+        * timer_msec value is specified then exchange resp handler
+        * will be called with timeout error if no response to abort.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       int (*seq_exch_abort)(const struct fc_seq *req_sp,
+                             unsigned int timer_msec);
+@@ -432,8 +444,6 @@
+       /*
+        * Indicate that an exchange/sequence tuple is complete and the memory
+        * allocated for the related objects may be freed.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*exch_done)(struct fc_seq *sp);
+@@ -441,8 +451,6 @@
+        * Assigns a EM and a free XID for an new exchange and then
+        * allocates a new exchange and sequence pair.
+        * The fp can be used to determine free XID.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp);
+@@ -450,16 +458,12 @@
+        * Release previously assigned XID by exch_get API.
+        * The LLD may implement this if XID is assigned by LLD
+        * in exch_get().
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp,
+                        u16 ex_id);
+       /*
+        * Start a new sequence on the same exchange/sequence tuple.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
+@@ -467,38 +471,26 @@
+        * Reset an exchange manager, completing all sequences and exchanges.
+        * If s_id is non-zero, reset only exchanges originating from that FID.
+        * If d_id is non-zero, reset only exchanges sending to that FID.
+-       *
+-       * STATUS: OPTIONAL
+        */
+-      void (*exch_mgr_reset)(struct fc_lport *,
++      void (*exch_mgr_reset)(struct fc_exch_mgr *,
+                              u32 s_id, u32 d_id);
+-      /*
+-       * Flush the rport work queue. Generally used before shutdown.
+-       *
+-       * STATUS: OPTIONAL
+-       */
+       void (*rport_flush_queue)(void);
++      /**
++       * Local Port interfaces
++       */
+       /*
+-       * Receive a frame for a local port.
+-       *
+-       * STATUS: OPTIONAL
++       * Receive a frame to a local port.
+        */
+       void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
+                          struct fc_frame *fp);
+-      /*
+-       * Reset the local port.
+-       *
+-       * STATUS: OPTIONAL
+-       */
+       int (*lport_reset)(struct fc_lport *);
+-      /*
+-       * Create a remote port
++      /**
++       * Remote Port interfaces
+        */
+-      struct fc_rport *(*rport_create)(struct fc_disc_port *);
+       /*
+        * Initiates the RP state machine. It is called from the LP module.
+@@ -508,72 +500,57 @@
+        * - PLOGI
+        * - PRLI
+        * - RTV
+-       *
+-       * STATUS: OPTIONAL
+        */
+       int (*rport_login)(struct fc_rport *rport);
+       /*
+        * Logoff, and remove the rport from the transport if
+        * it had been added. This will send a LOGO to the target.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       int (*rport_logoff)(struct fc_rport *rport);
+       /*
+        * Recieve a request from a remote port.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
+                              struct fc_rport *);
+-      /*
+-       * lookup an rport by it's port ID.
+-       *
+-       * STATUS: OPTIONAL
+-       */
+       struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
++      /**
++       * FCP interfaces
++       */
++
+       /*
+        * Send a fcp cmd from fsp pkt.
+        * Called with the SCSI host lock unlocked and irqs disabled.
+        *
+        * The resp handler is called when FCP_RSP received.
+        *
+-       * STATUS: OPTIONAL
+        */
+       int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
+                           void (*resp)(struct fc_seq *, struct fc_frame *fp,
+                                        void *arg));
+       /*
+-       * Cleanup the FCP layer, used durring link down and reset
+-       *
+-       * STATUS: OPTIONAL
++       * Used at least durring linkdown and reset
+        */
+       void (*fcp_cleanup)(struct fc_lport *lp);
+       /*
+        * Abort all I/O on a local port
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*fcp_abort_io)(struct fc_lport *lp);
+-      /*
+-       * Receive a request for the discovery layer.
+-       *
+-       * STATUS: OPTIONAL
++      /**
++       * Discovery interfaces
+        */
++
+       void (*disc_recv_req)(struct fc_seq *,
+                             struct fc_frame *, struct fc_lport *);
+       /*
+        * Start discovery for a local port.
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*disc_start)(void (*disc_callback)(struct fc_lport *,
+                                                enum fc_disc_event),
+@@ -582,8 +559,6 @@
+       /*
+        * Stop discovery for a given lport. This will remove
+        * all discovered rports
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*disc_stop) (struct fc_lport *);
+@@ -591,8 +566,6 @@
+        * Stop discovery for a given lport. This will block
+        * until all discovered rports are deleted from the
+        * FC transport class
+-       *
+-       * STATUS: OPTIONAL
+        */
+       void (*disc_stop_final) (struct fc_lport *);
+ };
+@@ -630,8 +603,7 @@
+       /* Operational Information */
+       struct libfc_function_template tt;
+-      u8                      link_up;
+-      u8                      qfull;
++      u16                     link_status;
+       enum fc_lport_state     state;
+       unsigned long           boot_time;
+@@ -665,7 +637,7 @@
+       struct delayed_work     disc_work;
+ };
+-/*
++/**
+  * FC_LPORT HELPER FUNCTIONS
+  *****************************/
+ static inline void *lport_priv(const struct fc_lport *lp)
+@@ -697,7 +669,7 @@
+ }
+-/*
++/**
+  * LOCAL PORT LAYER
+  *****************************/
+ int fc_lport_init(struct fc_lport *lp);
+@@ -732,6 +704,12 @@
+ void fc_linkdown(struct fc_lport *);
+ /*
++ * Pause and unpause traffic.
++ */
++void fc_pause(struct fc_lport *);
++void fc_unpause(struct fc_lport *);
++
++/*
+  * Configure the local port.
+  */
+ int fc_lport_config(struct fc_lport *);
+@@ -747,19 +725,19 @@
+ int fc_set_mfs(struct fc_lport *lp, u32 mfs);
+-/*
++/**
+  * REMOTE PORT LAYER
+  *****************************/
+ int fc_rport_init(struct fc_lport *lp);
+ void fc_rport_terminate_io(struct fc_rport *rp);
+-/*
++/**
+  * DISCOVERY LAYER
+  *****************************/
+ int fc_disc_init(struct fc_lport *lp);
+-/*
++/**
+  * SCSI LAYER
+  *****************************/
+ /*
+@@ -820,7 +798,7 @@
+  */
+ void fc_fcp_destroy(struct fc_lport *);
+-/*
++/**
+  * ELS/CT interface
+  *****************************/
+ /*
+@@ -829,7 +807,7 @@
+ int fc_elsct_init(struct fc_lport *lp);
+-/*
++/**
+  * EXCHANGE MANAGER LAYER
+  *****************************/
+ /*
+@@ -938,7 +916,7 @@
+  * If s_id is non-zero, reset only exchanges originating from that FID.
+  * If d_id is non-zero, reset only exchanges sending to that FID.
+  */
+-void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
++void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id);
+ /*
+  * Functions for fc_functions_template
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/scsi/libfcoe.h linux-2.6.29-rc3.owrt/include/scsi/libfcoe.h
+--- linux-2.6.29.owrt/include/scsi/libfcoe.h   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/scsi/libfcoe.h       2009-05-10 23:48:29.000000000 +0200
+@@ -46,7 +46,6 @@
+       struct net_device *phys_dev;            /* device with ethtool_ops */
+       struct packet_type  fcoe_packet_type;
+       struct sk_buff_head fcoe_pending_queue;
+-      u8      fcoe_pending_queue_active;
+       u8 dest_addr[ETH_ALEN];
+       u8 ctl_src_addr[ETH_ALEN];
+@@ -59,10 +58,16 @@
+       u8 address_mode;
+ };
++static inline struct fcoe_softc *fcoe_softc(
++      const struct fc_lport *lp)
++{
++      return (struct fcoe_softc *)lport_priv(lp);
++}
++
+ static inline struct net_device *fcoe_netdev(
+       const struct fc_lport *lp)
+ {
+-      return ((struct fcoe_softc *)lport_priv(lp))->real_dev;
++      return fcoe_softc(lp)->real_dev;
+ }
+ static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/sound/hdsp.h linux-2.6.29-rc3.owrt/include/sound/hdsp.h
+--- linux-2.6.29.owrt/include/sound/hdsp.h     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/sound/hdsp.h 2009-05-10 23:48:29.000000000 +0200
+@@ -19,8 +19,6 @@
+  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+-#include <linux/types.h>
+-
+ #define HDSP_MATRIX_MIXER_SIZE 2048
+ enum HDSP_IO_Type {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/video/aty128.h linux-2.6.29-rc3.owrt/include/video/aty128.h
+--- linux-2.6.29.owrt/include/video/aty128.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/video/aty128.h       2009-05-10 23:48:29.000000000 +0200
+@@ -21,9 +21,9 @@
+ #define I2C_CNTL_1                            0x0094
+ #define PALETTE_INDEX                         0x00b0
+ #define PALETTE_DATA                          0x00b4
+-#define CNFG_CNTL                             0x00e0
++#define CONFIG_CNTL                           0x00e0
+ #define GEN_RESET_CNTL                                0x00f0
+-#define CNFG_MEMSIZE                          0x00f8
++#define CONFIG_MEMSIZE                                0x00f8
+ #define MEM_CNTL                              0x0140
+ #define MEM_POWER_MISC                                0x015c
+ #define AGP_BASE                              0x0170
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/video/mach64.h linux-2.6.29-rc3.owrt/include/video/mach64.h
+--- linux-2.6.29.owrt/include/video/mach64.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/video/mach64.h       2009-05-10 23:48:29.000000000 +0200
+@@ -103,7 +103,7 @@
+ #define CUR_HORZ_VERT_OFF     0x0070  /* Dword offset 0_1C */
+ #define CUR2_HORZ_VERT_OFF    0x0070  /* Dword offset 0_1C */
+-#define CNFG_PANEL_LG         0x0074  /* Dword offset 0_1D (LG) */
++#define CONFIG_PANEL_LG               0x0074  /* Dword offset 0_1D (LG) */
+ /* General I/O Control */
+ #define GP_IO                 0x0078  /* Dword offset 0_1E */
+@@ -146,8 +146,8 @@
+ #define CLOCK_SEL_CNTL                0x0090  /* Dword offset 0_24 */
+ /* Configuration */
+-#define CNFG_STAT1            0x0094  /* Dword offset 0_25 */
+-#define CNFG_STAT2            0x0098  /* Dword offset 0_26 */
++#define CONFIG_STAT1          0x0094  /* Dword offset 0_25 */
++#define CONFIG_STAT2          0x0098  /* Dword offset 0_26 */
+ /* Bus Control */
+ #define BUS_CNTL              0x00A0  /* Dword offset 0_28 */
+@@ -190,9 +190,9 @@
+ #define POWER_MANAGEMENT_LG   0x00D8  /* Dword offset 0_36 (LG) */
+ /* Configuration */
+-#define CNFG_CNTL             0x00DC  /* Dword offset 0_37 (CT, ET, VT) */
+-#define CNFG_CHIP_ID          0x00E0  /* Dword offset 0_38 */
+-#define CNFG_STAT0            0x00E4  /* Dword offset 0_39 */
++#define CONFIG_CNTL           0x00DC  /* Dword offset 0_37 (CT, ET, VT) */
++#define CONFIG_CHIP_ID                0x00E0  /* Dword offset 0_38 */
++#define CONFIG_STAT0          0x00E4  /* Dword offset 0_39 */
+ /* Test and Debug */
+ #define CRC_SIG                       0x00E8  /* Dword offset 0_3A */
+@@ -851,17 +851,17 @@
+ #define PLL_YCLK_CNTL         0x29
+ #define PM_DYN_CLK_CNTL               0x2A
+-/* CNFG_CNTL register constants */
++/* CONFIG_CNTL register constants */
+ #define APERTURE_4M_ENABLE    1
+ #define APERTURE_8M_ENABLE    2
+ #define VGA_APERTURE_ENABLE   4
+-/* CNFG_STAT0 register constants (GX, CX) */
++/* CONFIG_STAT0 register constants (GX, CX) */
+ #define CFG_BUS_TYPE          0x00000007
+ #define CFG_MEM_TYPE          0x00000038
+ #define CFG_INIT_DAC_TYPE     0x00000e00
+-/* CNFG_STAT0 register constants (CT, ET, VT) */
++/* CONFIG_STAT0 register constants (CT, ET, VT) */
+ #define CFG_MEM_TYPE_xT               0x00000007
+ #define ISA                   0
+@@ -942,7 +942,7 @@
+ #define PCI_ATI_VENDOR_ID     0x1002
+-/* CNFG_CHIP_ID register constants */
++/* CONFIG_CHIP_ID register constants */
+ #define CFG_CHIP_TYPE         0x0000FFFF
+ #define CFG_CHIP_CLASS                0x00FF0000
+ #define CFG_CHIP_REV          0xFF000000
+@@ -951,7 +951,7 @@
+ #define CFG_CHIP_MINOR                0xC0000000
+-/* Chip IDs read from CNFG_CHIP_ID */
++/* Chip IDs read from CONFIG_CHIP_ID */
+ /* mach64GX family */
+ #define GX_CHIP_ID    0xD7    /* mach64GX (ATI888GX00) */
+@@ -1254,7 +1254,7 @@
+ #define CRTC2_DISPLAY_DIS     0x00000400
+ /* LCD register indices */
+-#define CNFG_PANEL            0x00
++#define CONFIG_PANEL          0x00
+ #define LCD_GEN_CNTL          0x01
+ #define DSTN_CONTROL          0x02
+ #define HFB_PITCH_ADDR                0x03
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/video/radeon.h linux-2.6.29-rc3.owrt/include/video/radeon.h
+--- linux-2.6.29.owrt/include/video/radeon.h   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/video/radeon.h       2009-05-10 23:48:29.000000000 +0200
+@@ -11,13 +11,13 @@
+ #define HI_STAT                                0x004C  
+ #define BUS_CNTL1                              0x0034
+ #define I2C_CNTL_1                           0x0094  
+-#define CNFG_CNTL                              0x00E0
+-#define CNFG_MEMSIZE                           0x00F8
+-#define CNFG_APER_0_BASE                       0x0100
+-#define CNFG_APER_1_BASE                       0x0104
+-#define CNFG_APER_SIZE                         0x0108
+-#define CNFG_REG_1_BASE                        0x010C
+-#define CNFG_REG_APER_SIZE                     0x0110
++#define CONFIG_CNTL                            0x00E0  
++#define CONFIG_MEMSIZE                         0x00F8  
++#define CONFIG_APER_0_BASE                     0x0100  
++#define CONFIG_APER_1_BASE                     0x0104  
++#define CONFIG_APER_SIZE                       0x0108  
++#define CONFIG_REG_1_BASE                      0x010C  
++#define CONFIG_REG_APER_SIZE                   0x0110  
+ #define PAD_AGPINPUT_DELAY                     0x0164  
+ #define PAD_CTLR_STRENGTH                      0x0168  
+ #define PAD_CTLR_UPDATE                        0x016C
+@@ -509,7 +509,7 @@
+ /* CLOCK_CNTL_INDEX bit constants */
+ #define PLL_WR_EN                                  0x00000080
+-/* CNFG_CNTL bit constants */
++/* CONFIG_CNTL bit constants */
+ #define CFG_VGA_RAM_EN                             0x00000100
+ #define CFG_ATI_REV_ID_MASK                      (0xf << 16)
+ #define CFG_ATI_REV_A11                                  (0 << 16)
+@@ -980,7 +980,7 @@
+ /* masks */
+-#define CNFG_MEMSIZE_MASK             0x1f000000
++#define CONFIG_MEMSIZE_MASK           0x1f000000
+ #define MEM_CFG_TYPE                  0x40000000
+ #define DST_OFFSET_MASK                       0x003fffff
+ #define DST_PITCH_MASK                        0x3fc00000
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/video/sisfb.h linux-2.6.29-rc3.owrt/include/video/sisfb.h
+--- linux-2.6.29.owrt/include/video/sisfb.h    2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/video/sisfb.h        2009-05-10 23:48:29.000000000 +0200
+@@ -21,8 +21,8 @@
+ #ifndef _LINUX_SISFB_H_
+ #define _LINUX_SISFB_H_
+-#include <linux/types.h>
+ #include <asm/ioctl.h>
++#include <asm/types.h>
+ /**********************************************/
+ /*                   PUBLIC                   */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/include/video/uvesafb.h linux-2.6.29-rc3.owrt/include/video/uvesafb.h
+--- linux-2.6.29.owrt/include/video/uvesafb.h  2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/include/video/uvesafb.h      2009-05-10 23:48:29.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _UVESAFB_H
+ #define _UVESAFB_H
+-#include <linux/types.h>
+-
+ struct v86_regs {
+       __u32 ebx;
+       __u32 ecx;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/init/do_mounts.c linux-2.6.29-rc3.owrt/init/do_mounts.c
+--- linux-2.6.29.owrt/init/do_mounts.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/init/do_mounts.c     2009-05-10 23:48:29.000000000 +0200
+@@ -370,14 +370,10 @@
+               ssleep(root_delay);
+       }
+-      /*
+-       * wait for the known devices to complete their probing
+-       *
+-       * Note: this is a potential source of long boot delays.
+-       * For example, it is not atypical to wait 5 seconds here
+-       * for the touchpad of a laptop to initialize.
+-       */
+-      wait_for_device_probe();
++      /* wait for the known devices to complete their probing */
++      while (driver_probe_done() != 0)
++              msleep(100);
++      async_synchronize_full();
+       md_run_setup();
+@@ -403,7 +399,6 @@
+               while (driver_probe_done() != 0 ||
+                       (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
+                       msleep(100);
+-              async_synchronize_full();
+       }
+       is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/init/do_mounts_md.c linux-2.6.29-rc3.owrt/init/do_mounts_md.c
+--- linux-2.6.29.owrt/init/do_mounts_md.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/init/do_mounts_md.c  2009-05-10 23:48:29.000000000 +0200
+@@ -281,9 +281,8 @@
+        */
+       printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+       printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+-
+-      wait_for_device_probe();
+-
++      while (driver_probe_done() < 0)
++              msleep(100);
+       fd = sys_open("/dev/md0", 0, 0);
+       if (fd >= 0) {
+               sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/init/Kconfig linux-2.6.29-rc3.owrt/init/Kconfig
+--- linux-2.6.29.owrt/init/Kconfig     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/init/Kconfig 2009-05-10 23:48:29.000000000 +0200
+@@ -675,9 +675,6 @@
+ config SYSCTL
+       bool
+-config ANON_INODES
+-      bool
+-
+ menuconfig EMBEDDED
+       bool "Configure standard kernel features (for small systems)"
+       help
+@@ -783,6 +780,18 @@
+           This option allows to disable the internal PC-Speaker
+           support, saving some memory.
++config COMPAT_BRK
++      bool "Disable heap randomization"
++      default y
++      help
++        Randomizing heap placement makes heap exploits harder, but it
++        also breaks ancient binaries (including anything libc5 based).
++        This option changes the bootup default to heap randomization
++        disabled, and can be overriden runtime by setting
++        /proc/sys/kernel/randomize_va_space to 2.
++
++        On non-ancient distros (post-2000 ones) N is usually a safe choice.
++
+ config BASE_FULL
+       default y
+       bool "Enable full-sized data structures for core" if EMBEDDED
+@@ -800,6 +809,9 @@
+         support for "fast userspace mutexes".  The resulting kernel may not
+         run glibc-based applications correctly.
++config ANON_INODES
++      bool
++
+ config EPOLL
+       bool "Enable eventpoll support" if EMBEDDED
+       default y
+@@ -885,18 +897,6 @@
+         SLUB sysfs support. /sys/slab will not exist and there will be
+         no support for cache validation etc.
+-config COMPAT_BRK
+-      bool "Disable heap randomization"
+-      default y
+-      help
+-        Randomizing heap placement makes heap exploits harder, but it
+-        also breaks ancient binaries (including anything libc5 based).
+-        This option changes the bootup default to heap randomization
+-        disabled, and can be overriden runtime by setting
+-        /proc/sys/kernel/randomize_va_space to 2.
+-
+-        On non-ancient distros (post-2000 ones) N is usually a safe choice.
+-
+ choice
+       prompt "Choose SLAB allocator"
+       default SLUB
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/init/main.c linux-2.6.29-rc3.owrt/init/main.c
+--- linux-2.6.29.owrt/init/main.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/init/main.c  2009-05-10 23:48:29.000000000 +0200
+@@ -97,7 +97,7 @@
+ extern void tc_init(void);
+ #endif
+-enum system_states system_state __read_mostly;
++enum system_states system_state;
+ EXPORT_SYMBOL(system_state);
+ /*
+@@ -463,7 +463,6 @@
+        * at least once to get things moving:
+        */
+       init_idle_bootup_task(current);
+-      rcu_scheduler_starting();
+       preempt_enable_no_resched();
+       schedule();
+       preempt_disable();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/ipc/shm.c linux-2.6.29-rc3.owrt/ipc/shm.c
+--- linux-2.6.29.owrt/ipc/shm.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/ipc/shm.c    2009-05-10 23:48:29.000000000 +0200
+@@ -340,7 +340,6 @@
+       struct file * file;
+       char name[13];
+       int id;
+-      int acctflag = 0;
+       if (size < SHMMIN || size > ns->shm_ctlmax)
+               return -EINVAL;
+@@ -365,19 +364,18 @@
+       sprintf (name, "SYSV%08x", key);
+       if (shmflg & SHM_HUGETLB) {
+-              /* hugetlb_file_setup applies strict accounting */
+-              if (shmflg & SHM_NORESERVE)
+-                      acctflag = VM_NORESERVE;
+-              file = hugetlb_file_setup(name, size, acctflag);
++              /* hugetlb_file_setup takes care of mlock user accounting */
++              file = hugetlb_file_setup(name, size);
+               shp->mlock_user = current_user();
+       } else {
++              int acctflag = VM_ACCOUNT;
+               /*
+                * Do not allow no accounting for OVERCOMMIT_NEVER, even
+                * if it's asked for.
+                */
+               if  ((shmflg & SHM_NORESERVE) &&
+                               sysctl_overcommit_memory != OVERCOMMIT_NEVER)
+-                      acctflag = VM_NORESERVE;
++                      acctflag = 0;
+               file = shmem_file_setup(name, size, acctflag);
+       }
+       error = PTR_ERR(file);
+@@ -567,15 +565,11 @@
+                       struct hstate *h = hstate_file(shp->shm_file);
+                       *rss += pages_per_huge_page(h) * mapping->nrpages;
+               } else {
+-#ifdef CONFIG_SHMEM
+                       struct shmem_inode_info *info = SHMEM_I(inode);
+                       spin_lock(&info->lock);
+                       *rss += inode->i_mapping->nrpages;
+                       *swp += info->swapped;
+                       spin_unlock(&info->lock);
+-#else
+-                      *rss += inode->i_mapping->nrpages;
+-#endif
+               }
+               total++;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/async.c linux-2.6.29-rc3.owrt/kernel/async.c
+--- linux-2.6.29.owrt/kernel/async.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/async.c       2009-05-10 23:48:29.000000000 +0200
+@@ -54,7 +54,6 @@
+ #include <linux/sched.h>
+ #include <linux/init.h>
+ #include <linux/kthread.h>
+-#include <linux/delay.h>
+ #include <asm/atomic.h>
+ static async_cookie_t next_cookie = 1;
+@@ -133,23 +132,21 @@
+       entry = list_first_entry(&async_pending, struct async_entry, list);
+       /* 2) move it to the running queue */
+-      list_move_tail(&entry->list, entry->running);
++      list_del(&entry->list);
++      list_add_tail(&entry->list, &async_running);
+       spin_unlock_irqrestore(&async_lock, flags);
+       /* 3) run it (and print duration)*/
+       if (initcall_debug && system_state == SYSTEM_BOOTING) {
+-              printk("calling  %lli_%pF @ %i\n", (long long)entry->cookie,
+-                      entry->func, task_pid_nr(current));
++              printk("calling  %lli_%pF @ %i\n", entry->cookie, entry->func, task_pid_nr(current));
+               calltime = ktime_get();
+       }
+       entry->func(entry->data, entry->cookie);
+       if (initcall_debug && system_state == SYSTEM_BOOTING) {
+               rettime = ktime_get();
+               delta = ktime_sub(rettime, calltime);
+-              printk("initcall %lli_%pF returned 0 after %lld usecs\n",
+-                      (long long)entry->cookie,
+-                      entry->func,
+-                      (long long)ktime_to_ns(delta) >> 10);
++              printk("initcall %lli_%pF returned 0 after %lld usecs\n", entry->cookie,
++                      entry->func, ktime_to_ns(delta) >> 10);
+       }
+       /* 4) remove it from the running queue */
+@@ -208,44 +205,18 @@
+       return newcookie;
+ }
+-/**
+- * async_schedule - schedule a function for asynchronous execution
+- * @ptr: function to execute asynchronously
+- * @data: data pointer to pass to the function
+- *
+- * Returns an async_cookie_t that may be used for checkpointing later.
+- * Note: This function may be called from atomic or non-atomic contexts.
+- */
+ async_cookie_t async_schedule(async_func_ptr *ptr, void *data)
+ {
+-      return __async_schedule(ptr, data, &async_running);
++      return __async_schedule(ptr, data, &async_pending);
+ }
+ EXPORT_SYMBOL_GPL(async_schedule);
+-/**
+- * async_schedule_domain - schedule a function for asynchronous execution within a certain domain
+- * @ptr: function to execute asynchronously
+- * @data: data pointer to pass to the function
+- * @running: running list for the domain
+- *
+- * Returns an async_cookie_t that may be used for checkpointing later.
+- * @running may be used in the async_synchronize_*_domain() functions
+- * to wait within a certain synchronization domain rather than globally.
+- * A synchronization domain is specified via the running queue @running to use.
+- * Note: This function may be called from atomic or non-atomic contexts.
+- */
+-async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data,
+-                                   struct list_head *running)
++async_cookie_t async_schedule_special(async_func_ptr *ptr, void *data, struct list_head *running)
+ {
+       return __async_schedule(ptr, data, running);
+ }
+-EXPORT_SYMBOL_GPL(async_schedule_domain);
++EXPORT_SYMBOL_GPL(async_schedule_special);
+-/**
+- * async_synchronize_full - synchronize all asynchronous function calls
+- *
+- * This function waits until all asynchronous function calls have been done.
+- */
+ void async_synchronize_full(void)
+ {
+       do {
+@@ -254,30 +225,13 @@
+ }
+ EXPORT_SYMBOL_GPL(async_synchronize_full);
+-/**
+- * async_synchronize_full_domain - synchronize all asynchronous function within a certain domain
+- * @list: running list to synchronize on
+- *
+- * This function waits until all asynchronous function calls for the
+- * synchronization domain specified by the running list @list have been done.
+- */
+-void async_synchronize_full_domain(struct list_head *list)
++void async_synchronize_full_special(struct list_head *list)
+ {
+-      async_synchronize_cookie_domain(next_cookie, list);
++      async_synchronize_cookie_special(next_cookie, list);
+ }
+-EXPORT_SYMBOL_GPL(async_synchronize_full_domain);
++EXPORT_SYMBOL_GPL(async_synchronize_full_special);
+-/**
+- * async_synchronize_cookie_domain - synchronize asynchronous function calls within a certain domain with cookie checkpointing
+- * @cookie: async_cookie_t to use as checkpoint
+- * @running: running list to synchronize on
+- *
+- * This function waits until all asynchronous function calls for the
+- * synchronization domain specified by the running list @list submitted
+- * prior to @cookie have been done.
+- */
+-void async_synchronize_cookie_domain(async_cookie_t cookie,
+-                                   struct list_head *running)
++void async_synchronize_cookie_special(async_cookie_t cookie, struct list_head *running)
+ {
+       ktime_t starttime, delta, endtime;
+@@ -293,22 +247,14 @@
+               delta = ktime_sub(endtime, starttime);
+               printk("async_continuing @ %i after %lli usec\n",
+-                      task_pid_nr(current),
+-                      (long long)ktime_to_ns(delta) >> 10);
++                      task_pid_nr(current), ktime_to_ns(delta) >> 10);
+       }
+ }
+-EXPORT_SYMBOL_GPL(async_synchronize_cookie_domain);
++EXPORT_SYMBOL_GPL(async_synchronize_cookie_special);
+-/**
+- * async_synchronize_cookie - synchronize asynchronous function calls with cookie checkpointing
+- * @cookie: async_cookie_t to use as checkpoint
+- *
+- * This function waits until all asynchronous function calls prior to @cookie
+- * have been done.
+- */
+ void async_synchronize_cookie(async_cookie_t cookie)
+ {
+-      async_synchronize_cookie_domain(cookie, &async_running);
++      async_synchronize_cookie_special(cookie, &async_running);
+ }
+ EXPORT_SYMBOL_GPL(async_synchronize_cookie);
+@@ -369,11 +315,7 @@
+               ec = atomic_read(&entry_count);
+               while (tc < ec && tc < MAX_THREADS) {
+-                      if (IS_ERR(kthread_run(async_thread, NULL, "async/%i",
+-                                             tc))) {
+-                              msleep(100);
+-                              continue;
+-                      }
++                      kthread_run(async_thread, NULL, "async/%i", tc);
+                       atomic_inc(&thread_count);
+                       tc++;
+               }
+@@ -388,9 +330,7 @@
+ static int __init async_init(void)
+ {
+       if (async_enabled)
+-              if (IS_ERR(kthread_run(async_manager_thread, NULL,
+-                                     "async/mgr")))
+-                      async_enabled = 0;
++              kthread_run(async_manager_thread, NULL, "async/mgr");
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/cgroup.c linux-2.6.29-rc3.owrt/kernel/cgroup.c
+--- linux-2.6.29.owrt/kernel/cgroup.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/cgroup.c      2009-05-10 23:48:29.000000000 +0200
+@@ -1115,15 +1115,13 @@
+       }
+       write_unlock(&css_set_lock);
+-      if (!list_empty(&root->root_list)) {
+-              list_del(&root->root_list);
+-              root_count--;
+-      }
++      list_del(&root->root_list);
++      root_count--;
+       mutex_unlock(&cgroup_mutex);
+-      kill_litter_super(sb);
+       kfree(root);
++      kill_litter_super(sb);
+ }
+ static struct file_system_type cgroup_fs_type = {
+@@ -2351,7 +2349,7 @@
+       for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+               struct cgroup_subsys *ss = subsys[i];
+               if (ss->root == root)
+-                      mutex_lock(&ss->hierarchy_mutex);
++                      mutex_lock_nested(&ss->hierarchy_mutex, i);
+       }
+ }
+@@ -2436,9 +2434,7 @@
+  err_remove:
+-      cgroup_lock_hierarchy(root);
+       list_del(&cgrp->sibling);
+-      cgroup_unlock_hierarchy(root);
+       root->number_of_cgroups--;
+  err_destroy:
+@@ -2511,7 +2507,7 @@
+       for_each_subsys(cgrp->root, ss) {
+               struct cgroup_subsys_state *css = cgrp->subsys[ss->subsys_id];
+               int refcnt;
+-              while (1) {
++              do {
+                       /* We can only remove a CSS with a refcnt==1 */
+                       refcnt = atomic_read(&css->refcnt);
+                       if (refcnt > 1) {
+@@ -2525,10 +2521,7 @@
+                        * css_tryget() to spin until we set the
+                        * CSS_REMOVED bits or abort
+                        */
+-                      if (atomic_cmpxchg(&css->refcnt, refcnt, 0) == refcnt)
+-                              break;
+-                      cpu_relax();
+-              }
++              } while (atomic_cmpxchg(&css->refcnt, refcnt, 0) != refcnt);
+       }
+  done:
+       for_each_subsys(cgrp->root, ss) {
+@@ -2637,7 +2630,6 @@
+       BUG_ON(!list_empty(&init_task.tasks));
+       mutex_init(&ss->hierarchy_mutex);
+-      lockdep_set_class(&ss->hierarchy_mutex, &ss->subsys_key);
+       ss->active = 1;
+ }
+@@ -2999,21 +2991,20 @@
+               mutex_unlock(&cgroup_mutex);
+               return 0;
+       }
++      task_lock(tsk);
++      cg = tsk->cgroups;
++      parent = task_cgroup(tsk, subsys->subsys_id);
+       /* Pin the hierarchy */
+-      if (!atomic_inc_not_zero(&root->sb->s_active)) {
++      if (!atomic_inc_not_zero(&parent->root->sb->s_active)) {
+               /* We race with the final deactivate_super() */
+               mutex_unlock(&cgroup_mutex);
+               return 0;
+       }
+       /* Keep the cgroup alive */
+-      task_lock(tsk);
+-      parent = task_cgroup(tsk, subsys->subsys_id);
+-      cg = tsk->cgroups;
+       get_css_set(cg);
+       task_unlock(tsk);
+-
+       mutex_unlock(&cgroup_mutex);
+       /* Now do the VFS work to create a cgroup */
+@@ -3052,7 +3043,7 @@
+               mutex_unlock(&inode->i_mutex);
+               put_css_set(cg);
+-              deactivate_super(root->sb);
++              deactivate_super(parent->root->sb);
+               /* The cgroup is still accessible in the VFS, but
+                * we're not going to try to rmdir() it at this
+                * point. */
+@@ -3078,7 +3069,7 @@
+       mutex_lock(&cgroup_mutex);
+       put_css_set(cg);
+       mutex_unlock(&cgroup_mutex);
+-      deactivate_super(root->sb);
++      deactivate_super(parent->root->sb);
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/cpuset.c linux-2.6.29-rc3.owrt/kernel/cpuset.c
+--- linux-2.6.29.owrt/kernel/cpuset.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/cpuset.c      2009-05-10 23:48:29.000000000 +0200
+@@ -61,14 +61,6 @@
+ #include <linux/cgroup.h>
+ /*
+- * Workqueue for cpuset related tasks.
+- *
+- * Using kevent workqueue may cause deadlock when memory_migrate
+- * is set. So we create a separate workqueue thread for cpuset.
+- */
+-static struct workqueue_struct *cpuset_wq;
+-
+-/*
+  * Tracks how many cpusets are currently defined in system.
+  * When there is only one cpuset (the root cpuset) we can
+  * short circuit some hooks.
+@@ -839,7 +831,7 @@
+  */
+ static void async_rebuild_sched_domains(void)
+ {
+-      queue_work(cpuset_wq, &rebuild_sched_domains_work);
++      schedule_work(&rebuild_sched_domains_work);
+ }
+ /*
+@@ -2119,9 +2111,6 @@
+       hotcpu_notifier(cpuset_track_online_cpus, 0);
+       hotplug_memory_notifier(cpuset_track_online_nodes, 10);
+-
+-      cpuset_wq = create_singlethread_workqueue("cpuset");
+-      BUG_ON(!cpuset_wq);
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/exit.c linux-2.6.29-rc3.owrt/kernel/exit.c
+--- linux-2.6.29.owrt/kernel/exit.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/exit.c        2009-05-10 23:48:29.000000000 +0200
+@@ -118,8 +118,6 @@
+                * We won't ever get here for the group leader, since it
+                * will have been the last reference on the signal_struct.
+                */
+-              sig->utime = cputime_add(sig->utime, task_utime(tsk));
+-              sig->stime = cputime_add(sig->stime, task_stime(tsk));
+               sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
+               sig->min_flt += tsk->min_flt;
+               sig->maj_flt += tsk->maj_flt;
+@@ -128,7 +126,6 @@
+               sig->inblock += task_io_get_inblock(tsk);
+               sig->oublock += task_io_get_oublock(tsk);
+               task_io_accounting_add(&sig->ioac, &tsk->ioac);
+-              sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
+               sig = NULL; /* Marker for below. */
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/fork.c linux-2.6.29-rc3.owrt/kernel/fork.c
+--- linux-2.6.29.owrt/kernel/fork.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/fork.c        2009-05-10 23:48:29.000000000 +0200
+@@ -852,14 +852,13 @@
+       sig->tty_old_pgrp = NULL;
+       sig->tty = NULL;
+-      sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
++      sig->cutime = sig->cstime = cputime_zero;
+       sig->gtime = cputime_zero;
+       sig->cgtime = cputime_zero;
+       sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
+       sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
+       sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
+       task_io_accounting_init(&sig->ioac);
+-      sig->sum_sched_runtime = 0;
+       taskstats_tgid_init(sig);
+       task_lock(current->group_leader);
+@@ -1007,7 +1006,6 @@
+        * triggers too late. This doesn't hurt, the check is only there
+        * to stop root fork bombs.
+        */
+-      retval = -EAGAIN;
+       if (nr_threads >= max_threads)
+               goto bad_fork_cleanup_count;
+@@ -1096,7 +1094,7 @@
+ #ifdef CONFIG_DEBUG_MUTEXES
+       p->blocked_on = NULL; /* not blocked yet */
+ #endif
+-      if (unlikely(current->ptrace))
++      if (unlikely(ptrace_reparented(current)))
+               ptrace_fork(p, clone_flags);
+       /* Perform scheduler related setup. Assign this task to a CPU. */
+@@ -1180,6 +1178,10 @@
+ #endif
+       clear_all_latency_tracing(p);
++      /* Our parent execution domain becomes current domain
++         These must match for thread signalling to apply */
++      p->parent_exec_id = p->self_exec_id;
++
+       /* ok, now we should be set up.. */
+       p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
+       p->pdeath_signal = 0;
+@@ -1217,13 +1219,10 @@
+               set_task_cpu(p, smp_processor_id());
+       /* CLONE_PARENT re-uses the old parent */
+-      if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
++      if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+               p->real_parent = current->real_parent;
+-              p->parent_exec_id = current->parent_exec_id;
+-      } else {
++      else
+               p->real_parent = current;
+-              p->parent_exec_id = current->self_exec_id;
+-      }
+       spin_lock(&current->sighand->siglock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/futex.c linux-2.6.29-rc3.owrt/kernel/futex.c
+--- linux-2.6.29.owrt/kernel/futex.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/futex.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1165,7 +1165,6 @@
+                     u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
+ {
+       struct task_struct *curr = current;
+-      struct restart_block *restart;
+       DECLARE_WAITQUEUE(wait, curr);
+       struct futex_hash_bucket *hb;
+       struct futex_q q;
+@@ -1217,13 +1216,11 @@
+               if (!ret)
+                       goto retry;
+-              goto out;
++              return ret;
+       }
+       ret = -EWOULDBLOCK;
+-      if (unlikely(uval != val)) {
+-              queue_unlock(&q, hb);
+-              goto out_put_key;
+-      }
++      if (uval != val)
++              goto out_unlock_put_key;
+       /* Only actually queue if *uaddr contained val.  */
+       queue_me(&q, hb);
+@@ -1287,38 +1284,38 @@
+        */
+       /* If we were woken (and unqueued), we succeeded, whatever. */
+-      ret = 0;
+       if (!unqueue_me(&q))
+-              goto out_put_key;
+-      ret = -ETIMEDOUT;
++              return 0;
+       if (rem)
+-              goto out_put_key;
++              return -ETIMEDOUT;
+       /*
+        * We expect signal_pending(current), but another thread may
+        * have handled it for us already.
+        */
+-      ret = -ERESTARTSYS;
+       if (!abs_time)
+-              goto out_put_key;
+-
+-      restart = &current_thread_info()->restart_block;
+-      restart->fn = futex_wait_restart;
+-      restart->futex.uaddr = (u32 *)uaddr;
+-      restart->futex.val = val;
+-      restart->futex.time = abs_time->tv64;
+-      restart->futex.bitset = bitset;
+-      restart->futex.flags = 0;
+-
+-      if (fshared)
+-              restart->futex.flags |= FLAGS_SHARED;
+-      if (clockrt)
+-              restart->futex.flags |= FLAGS_CLOCKRT;
+-
+-      ret = -ERESTART_RESTARTBLOCK;
++              return -ERESTARTSYS;
++      else {
++              struct restart_block *restart;
++              restart = &current_thread_info()->restart_block;
++              restart->fn = futex_wait_restart;
++              restart->futex.uaddr = (u32 *)uaddr;
++              restart->futex.val = val;
++              restart->futex.time = abs_time->tv64;
++              restart->futex.bitset = bitset;
++              restart->futex.flags = 0;
++
++              if (fshared)
++                      restart->futex.flags |= FLAGS_SHARED;
++              if (clockrt)
++                      restart->futex.flags |= FLAGS_CLOCKRT;
++              return -ERESTART_RESTARTBLOCK;
++      }
+-out_put_key:
++out_unlock_put_key:
++      queue_unlock(&q, hb);
+       put_futex_key(fshared, &q.key);
++
+ out:
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/hrtimer.c linux-2.6.29-rc3.owrt/kernel/hrtimer.c
+--- linux-2.6.29.owrt/kernel/hrtimer.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/hrtimer.c     2009-05-10 23:48:29.000000000 +0200
+@@ -501,13 +501,6 @@
+                       continue;
+               timer = rb_entry(base->first, struct hrtimer, node);
+               expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
+-              /*
+-               * clock_was_set() has changed base->offset so the
+-               * result might be negative. Fix it up to prevent a
+-               * false positive in clockevents_program_event()
+-               */
+-              if (expires.tv64 < 0)
+-                      expires.tv64 = 0;
+               if (expires.tv64 < cpu_base->expires_next.tv64)
+                       cpu_base->expires_next = expires;
+       }
+@@ -1165,29 +1158,6 @@
+ #ifdef CONFIG_HIGH_RES_TIMERS
+-static int force_clock_reprogram;
+-
+-/*
+- * After 5 iteration's attempts, we consider that hrtimer_interrupt()
+- * is hanging, which could happen with something that slows the interrupt
+- * such as the tracing. Then we force the clock reprogramming for each future
+- * hrtimer interrupts to avoid infinite loops and use the min_delta_ns
+- * threshold that we will overwrite.
+- * The next tick event will be scheduled to 3 times we currently spend on
+- * hrtimer_interrupt(). This gives a good compromise, the cpus will spend
+- * 1/4 of their time to process the hrtimer interrupts. This is enough to
+- * let it running without serious starvation.
+- */
+-
+-static inline void
+-hrtimer_interrupt_hanging(struct clock_event_device *dev,
+-                      ktime_t try_time)
+-{
+-      force_clock_reprogram = 1;
+-      dev->min_delta_ns = (unsigned long)try_time.tv64 * 3;
+-      printk(KERN_WARNING "hrtimer: interrupt too slow, "
+-              "forcing clock min delta to %lu ns\n", dev->min_delta_ns);
+-}
+ /*
+  * High resolution timer interrupt
+  * Called with interrupts disabled
+@@ -1197,7 +1167,6 @@
+       struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+       struct hrtimer_clock_base *base;
+       ktime_t expires_next, now;
+-      int nr_retries = 0;
+       int i;
+       BUG_ON(!cpu_base->hres_active);
+@@ -1205,10 +1174,6 @@
+       dev->next_event.tv64 = KTIME_MAX;
+  retry:
+-      /* 5 retries is enough to notice a hang */
+-      if (!(++nr_retries % 5))
+-              hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now));
+-
+       now = ktime_get();
+       expires_next.tv64 = KTIME_MAX;
+@@ -1261,7 +1226,7 @@
+       /* Reprogramming necessary ? */
+       if (expires_next.tv64 != KTIME_MAX) {
+-              if (tick_program_event(expires_next, force_clock_reprogram))
++              if (tick_program_event(expires_next, 0))
+                       goto retry;
+       }
+ }
+@@ -1615,10 +1580,6 @@
+               break;
+ #ifdef CONFIG_HOTPLUG_CPU
+-      case CPU_DYING:
+-      case CPU_DYING_FROZEN:
+-              clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
+-              break;
+       case CPU_DEAD:
+       case CPU_DEAD_FROZEN:
+       {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/irq/chip.c linux-2.6.29-rc3.owrt/kernel/irq/chip.c
+--- linux-2.6.29.owrt/kernel/irq/chip.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/irq/chip.c    2009-05-10 23:48:29.000000000 +0200
+@@ -383,7 +383,6 @@
+ out_unlock:
+       spin_unlock(&desc->lock);
+ }
+-EXPORT_SYMBOL_GPL(handle_level_irq);
+ /**
+  *    handle_fasteoi_irq - irq handler for transparent controllers
+@@ -594,7 +593,6 @@
+       }
+       spin_unlock_irqrestore(&desc->lock, flags);
+ }
+-EXPORT_SYMBOL_GPL(__set_irq_handler);
+ void
+ set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/irq/numa_migrate.c linux-2.6.29-rc3.owrt/kernel/irq/numa_migrate.c
+--- linux-2.6.29.owrt/kernel/irq/numa_migrate.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/irq/numa_migrate.c    2009-05-10 23:48:29.000000000 +0200
+@@ -71,7 +71,7 @@
+       desc = irq_desc_ptrs[irq];
+       if (desc && old_desc != desc)
+-              goto out_unlock;
++                      goto out_unlock;
+       node = cpu_to_node(cpu);
+       desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
+@@ -84,15 +84,10 @@
+       init_copy_one_irq_desc(irq, old_desc, desc, cpu);
+       irq_desc_ptrs[irq] = desc;
+-      spin_unlock_irqrestore(&sparse_irq_lock, flags);
+       /* free the old one */
+       free_one_irq_desc(old_desc, desc);
+-      spin_unlock(&old_desc->lock);
+       kfree(old_desc);
+-      spin_lock(&desc->lock);
+-
+-      return desc;
+ out_unlock:
+       spin_unlock_irqrestore(&sparse_irq_lock, flags);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/itimer.c linux-2.6.29-rc3.owrt/kernel/itimer.c
+--- linux-2.6.29.owrt/kernel/itimer.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/itimer.c      2009-05-10 23:48:29.000000000 +0200
+@@ -62,7 +62,7 @@
+                       struct task_cputime cputime;
+                       cputime_t utime;
+-                      thread_group_cputimer(tsk, &cputime);
++                      thread_group_cputime(tsk, &cputime);
+                       utime = cputime.utime;
+                       if (cputime_le(cval, utime)) { /* about to fire */
+                               cval = jiffies_to_cputime(1);
+@@ -82,7 +82,7 @@
+                       struct task_cputime times;
+                       cputime_t ptime;
+-                      thread_group_cputimer(tsk, &times);
++                      thread_group_cputime(tsk, &times);
+                       ptime = cputime_add(times.utime, times.stime);
+                       if (cputime_le(cval, ptime)) { /* about to fire */
+                               cval = jiffies_to_cputime(1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/kexec.c linux-2.6.29-rc3.owrt/kernel/kexec.c
+--- linux-2.6.29.owrt/kernel/kexec.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/kexec.c       2009-05-10 23:48:29.000000000 +0200
+@@ -1465,11 +1465,6 @@
+               error = device_power_down(PMSG_FREEZE);
+               if (error)
+                       goto Enable_irqs;
+-
+-              /* Suspend system devices */
+-              error = sysdev_suspend(PMSG_FREEZE);
+-              if (error)
+-                      goto Power_up_devices;
+       } else
+ #endif
+       {
+@@ -1482,8 +1477,6 @@
+ #ifdef CONFIG_KEXEC_JUMP
+       if (kexec_image->preserve_context) {
+-              sysdev_resume();
+- Power_up_devices:
+               device_power_up(PMSG_RESTORE);
+  Enable_irqs:
+               local_irq_enable();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/Makefile linux-2.6.29-rc3.owrt/kernel/Makefile
+--- linux-2.6.29.owrt/kernel/Makefile  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/Makefile      2009-05-10 23:48:29.000000000 +0200
+@@ -51,7 +51,6 @@
+ obj-$(CONFIG_MODULES) += module.o
+ obj-$(CONFIG_KALLSYMS) += kallsyms.o
+ obj-$(CONFIG_PM) += power/
+-obj-$(CONFIG_FREEZER) += power/
+ obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
+ obj-$(CONFIG_KEXEC) += kexec.o
+ obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/module.c linux-2.6.29-rc3.owrt/kernel/module.c
+--- linux-2.6.29.owrt/kernel/module.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/module.c      2009-05-10 23:48:29.000000000 +0200
+@@ -573,13 +573,13 @@
+ /* Init the unload section of the module. */
+ static void module_unload_init(struct module *mod)
+ {
+-      int cpu;
++      unsigned int i;
+       INIT_LIST_HEAD(&mod->modules_which_use_me);
+-      for_each_possible_cpu(cpu)
+-              local_set(__module_ref_addr(mod, cpu), 0);
++      for (i = 0; i < NR_CPUS; i++)
++              local_set(&mod->ref[i].count, 0);
+       /* Hold reference count during initialization. */
+-      local_set(__module_ref_addr(mod, raw_smp_processor_id()), 1);
++      local_set(&mod->ref[raw_smp_processor_id()].count, 1);
+       /* Backwards compatibility macros put refcount during init. */
+       mod->waiter = current;
+ }
+@@ -717,11 +717,10 @@
+ unsigned int module_refcount(struct module *mod)
+ {
+-      unsigned int total = 0;
+-      int cpu;
++      unsigned int i, total = 0;
+-      for_each_possible_cpu(cpu)
+-              total += local_read(__module_ref_addr(mod, cpu));
++      for (i = 0; i < NR_CPUS; i++)
++              total += local_read(&mod->ref[i].count);
+       return total;
+ }
+ EXPORT_SYMBOL(module_refcount);
+@@ -895,7 +894,7 @@
+ {
+       if (module) {
+               unsigned int cpu = get_cpu();
+-              local_dec(__module_ref_addr(module, cpu));
++              local_dec(&module->ref[cpu].count);
+               /* Maybe they're waiting for us to drop reference? */
+               if (unlikely(!module_is_live(module)))
+                       wake_up_process(module->waiter);
+@@ -1465,10 +1464,7 @@
+       kfree(mod->args);
+       if (mod->percpu)
+               percpu_modfree(mod->percpu);
+-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+-      if (mod->refptr)
+-              percpu_modfree(mod->refptr);
+-#endif
++
+       /* Free lock-classes: */
+       lockdep_free_key_range(mod->module_core, mod->core_size);
+@@ -2074,14 +2070,6 @@
+       /* Module has been moved. */
+       mod = (void *)sechdrs[modindex].sh_addr;
+-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+-      mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
+-                                    mod->name);
+-      if (!mod->refptr) {
+-              err = -ENOMEM;
+-              goto free_init;
+-      }
+-#endif
+       /* Now we've moved module, initialize linked lists, etc. */
+       module_unload_init(mod);
+@@ -2288,14 +2276,9 @@
+       ftrace_release(mod->module_core, mod->core_size);
+  free_unload:
+       module_unload_free(mod);
+- free_init:
+-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+-      percpu_modfree(mod->refptr);
+-#endif
+       module_free(mod, mod->module_init);
+  free_core:
+       module_free(mod, mod->module_core);
+-      /* mod will be freed with core. Don't access it beyond this line! */
+  free_percpu:
+       if (percpu)
+               percpu_modfree(percpu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/posix-cpu-timers.c linux-2.6.29-rc3.owrt/kernel/posix-cpu-timers.c
+--- linux-2.6.29.owrt/kernel/posix-cpu-timers.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/posix-cpu-timers.c    2009-05-10 23:48:29.000000000 +0200
+@@ -230,71 +230,6 @@
+       return 0;
+ }
+-void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
+-{
+-      struct sighand_struct *sighand;
+-      struct signal_struct *sig;
+-      struct task_struct *t;
+-
+-      *times = INIT_CPUTIME;
+-
+-      rcu_read_lock();
+-      sighand = rcu_dereference(tsk->sighand);
+-      if (!sighand)
+-              goto out;
+-
+-      sig = tsk->signal;
+-
+-      t = tsk;
+-      do {
+-              times->utime = cputime_add(times->utime, t->utime);
+-              times->stime = cputime_add(times->stime, t->stime);
+-              times->sum_exec_runtime += t->se.sum_exec_runtime;
+-
+-              t = next_thread(t);
+-      } while (t != tsk);
+-
+-      times->utime = cputime_add(times->utime, sig->utime);
+-      times->stime = cputime_add(times->stime, sig->stime);
+-      times->sum_exec_runtime += sig->sum_sched_runtime;
+-out:
+-      rcu_read_unlock();
+-}
+-
+-static void update_gt_cputime(struct task_cputime *a, struct task_cputime *b)
+-{
+-      if (cputime_gt(b->utime, a->utime))
+-              a->utime = b->utime;
+-
+-      if (cputime_gt(b->stime, a->stime))
+-              a->stime = b->stime;
+-
+-      if (b->sum_exec_runtime > a->sum_exec_runtime)
+-              a->sum_exec_runtime = b->sum_exec_runtime;
+-}
+-
+-void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times)
+-{
+-      struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
+-      struct task_cputime sum;
+-      unsigned long flags;
+-
+-      spin_lock_irqsave(&cputimer->lock, flags);
+-      if (!cputimer->running) {
+-              cputimer->running = 1;
+-              /*
+-               * The POSIX timer interface allows for absolute time expiry
+-               * values through the TIMER_ABSTIME flag, therefore we have
+-               * to synchronize the timer to the clock every time we start
+-               * it.
+-               */
+-              thread_group_cputime(tsk, &sum);
+-              update_gt_cputime(&cputimer->cputime, &sum);
+-      }
+-      *times = cputimer->cputime;
+-      spin_unlock_irqrestore(&cputimer->lock, flags);
+-}
+-
+ /*
+  * Sample a process (thread group) clock for the given group_leader task.
+  * Must be called with tasklist_lock held for reading.
+@@ -522,7 +457,7 @@
+ {
+       struct task_cputime cputime;
+-      thread_group_cputimer(tsk, &cputime);
++      thread_group_cputime(tsk, &cputime);
+       cleanup_timers(tsk->signal->cpu_timers,
+                      cputime.utime, cputime.stime, cputime.sum_exec_runtime);
+ }
+@@ -681,33 +616,6 @@
+ }
+ /*
+- * Sample a process (thread group) timer for the given group_leader task.
+- * Must be called with tasklist_lock held for reading.
+- */
+-static int cpu_timer_sample_group(const clockid_t which_clock,
+-                                struct task_struct *p,
+-                                union cpu_time_count *cpu)
+-{
+-      struct task_cputime cputime;
+-
+-      thread_group_cputimer(p, &cputime);
+-      switch (CPUCLOCK_WHICH(which_clock)) {
+-      default:
+-              return -EINVAL;
+-      case CPUCLOCK_PROF:
+-              cpu->cpu = cputime_add(cputime.utime, cputime.stime);
+-              break;
+-      case CPUCLOCK_VIRT:
+-              cpu->cpu = cputime.utime;
+-              break;
+-      case CPUCLOCK_SCHED:
+-              cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
+-              break;
+-      }
+-      return 0;
+-}
+-
+-/*
+  * Guts of sys_timer_settime for CPU timers.
+  * This is called with the timer locked and interrupts disabled.
+  * If we return TIMER_RETRY, it's necessary to release the timer's lock
+@@ -768,7 +676,7 @@
+       if (CPUCLOCK_PERTHREAD(timer->it_clock)) {
+               cpu_clock_sample(timer->it_clock, p, &val);
+       } else {
+-              cpu_timer_sample_group(timer->it_clock, p, &val);
++              cpu_clock_sample_group(timer->it_clock, p, &val);
+       }
+       if (old) {
+@@ -916,7 +824,7 @@
+                       read_unlock(&tasklist_lock);
+                       goto dead;
+               } else {
+-                      cpu_timer_sample_group(timer->it_clock, p, &now);
++                      cpu_clock_sample_group(timer->it_clock, p, &now);
+                       clear_dead = (unlikely(p->exit_state) &&
+                                     thread_group_empty(p));
+               }
+@@ -1056,19 +964,6 @@
+       }
+ }
+-static void stop_process_timers(struct task_struct *tsk)
+-{
+-      struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
+-      unsigned long flags;
+-
+-      if (!cputimer->running)
+-              return;
+-
+-      spin_lock_irqsave(&cputimer->lock, flags);
+-      cputimer->running = 0;
+-      spin_unlock_irqrestore(&cputimer->lock, flags);
+-}
+-
+ /*
+  * Check for any per-thread CPU timers that have fired and move them
+  * off the tsk->*_timers list onto the firing list.  Per-thread timers
+@@ -1092,15 +987,13 @@
+           sig->rlim[RLIMIT_CPU].rlim_cur == RLIM_INFINITY &&
+           list_empty(&timers[CPUCLOCK_VIRT]) &&
+           cputime_eq(sig->it_virt_expires, cputime_zero) &&
+-          list_empty(&timers[CPUCLOCK_SCHED])) {
+-              stop_process_timers(tsk);
++          list_empty(&timers[CPUCLOCK_SCHED]))
+               return;
+-      }
+       /*
+        * Collect the current process totals.
+        */
+-      thread_group_cputimer(tsk, &cputime);
++      thread_group_cputime(tsk, &cputime);
+       utime = cputime.utime;
+       ptime = cputime_add(utime, cputime.stime);
+       sum_sched_runtime = cputime.sum_exec_runtime;
+@@ -1271,7 +1164,7 @@
+                       clear_dead_task(timer, now);
+                       goto out_unlock;
+               }
+-              cpu_timer_sample_group(timer->it_clock, p, &now);
++              cpu_clock_sample_group(timer->it_clock, p, &now);
+               bump_cpu_timer(timer, now);
+               /* Leave the tasklist_lock locked for the call below.  */
+       }
+@@ -1366,7 +1259,7 @@
+       if (!task_cputime_zero(&sig->cputime_expires)) {
+               struct task_cputime group_sample;
+-              thread_group_cputimer(tsk, &group_sample);
++              thread_group_cputime(tsk, &group_sample);
+               if (task_cputime_expired(&group_sample, &sig->cputime_expires))
+                       return 1;
+       }
+@@ -1448,7 +1341,7 @@
+       struct list_head *head;
+       BUG_ON(clock_idx == CPUCLOCK_SCHED);
+-      cpu_timer_sample_group(clock_idx, tsk, &now);
++      cpu_clock_sample_group(clock_idx, tsk, &now);
+       if (oldval) {
+               if (!cputime_eq(*oldval, cputime_zero)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/console.c linux-2.6.29-rc3.owrt/kernel/power/console.c
+--- linux-2.6.29.owrt/kernel/power/console.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/console.c       2009-05-10 23:48:29.000000000 +0200
+@@ -78,12 +78,6 @@
+       }
+       set_console(orig_fgconsole);
+       release_console_sem();
+-
+-      if (vt_waitactive(orig_fgconsole)) {
+-              pr_debug("Resume: Can't switch VCs.");
+-              return;
+-      }
+-
+       kmsg_redirect = orig_kmsg;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/disk.c linux-2.6.29-rc3.owrt/kernel/power/disk.c
+--- linux-2.6.29.owrt/kernel/power/disk.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/disk.c  2009-05-10 23:48:29.000000000 +0200
+@@ -227,12 +227,6 @@
+                       "aborting hibernation\n");
+               goto Enable_irqs;
+       }
+-      sysdev_suspend(PMSG_FREEZE);
+-      if (error) {
+-              printk(KERN_ERR "PM: Some devices failed to power down, "
+-                      "aborting hibernation\n");
+-              goto Power_up_devices;
+-      }
+       if (hibernation_test(TEST_CORE))
+               goto Power_up;
+@@ -248,11 +242,9 @@
+       if (!in_suspend)
+               platform_leave(platform_mode);
+  Power_up:
+-      sysdev_resume();
+       /* NOTE:  device_power_up() is just a resume() for devices
+        * that suspended with irqs off ... no overall powerup.
+        */
+- Power_up_devices:
+       device_power_up(in_suspend ?
+               (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+  Enable_irqs:
+@@ -343,7 +335,6 @@
+                       "aborting resume\n");
+               goto Enable_irqs;
+       }
+-      sysdev_suspend(PMSG_QUIESCE);
+       /* We'll ignore saved state, but this gets preempt count (etc) right */
+       save_processor_state();
+       error = restore_highmem();
+@@ -366,7 +357,6 @@
+       swsusp_free();
+       restore_processor_state();
+       touch_softlockup_watchdog();
+-      sysdev_resume();
+       device_power_up(PMSG_RECOVER);
+  Enable_irqs:
+       local_irq_enable();
+@@ -450,7 +440,6 @@
+       local_irq_disable();
+       error = device_power_down(PMSG_HIBERNATE);
+       if (!error) {
+-              sysdev_suspend(PMSG_HIBERNATE);
+               hibernation_ops->enter();
+               /* We should never get here */
+               while (1);
+@@ -606,12 +595,6 @@
+       unsigned int flags;
+       /*
+-       * If the user said "noresume".. bail out early.
+-       */
+-      if (noresume)
+-              return 0;
+-
+-      /*
+        * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
+        * is configured into the kernel. Since the regular hibernate
+        * trigger path is via sysfs which takes a buffer mutex before
+@@ -627,11 +610,6 @@
+                       mutex_unlock(&pm_mutex);
+                       return -ENOENT;
+               }
+-              /*
+-               * Some device discovery might still be in progress; we need
+-               * to wait for this to finish.
+-               */
+-              wait_for_device_probe();
+               swsusp_resume_device = name_to_dev_t(resume_file);
+               pr_debug("PM: Resume from partition %s\n", resume_file);
+       } else {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/main.c linux-2.6.29-rc3.owrt/kernel/power/main.c
+--- linux-2.6.29.owrt/kernel/power/main.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/main.c  2009-05-10 23:48:29.000000000 +0200
+@@ -57,6 +57,16 @@
+ #ifdef CONFIG_PM_DEBUG
+ int pm_test_level = TEST_NONE;
++static int suspend_test(int level)
++{
++      if (pm_test_level == level) {
++              printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
++              mdelay(5000);
++              return 1;
++      }
++      return 0;
++}
++
+ static const char * const pm_tests[__TEST_AFTER_LAST] = {
+       [TEST_NONE] = "none",
+       [TEST_CORE] = "core",
+@@ -115,24 +125,14 @@
+ }
+ power_attr(pm_test);
+-#endif /* CONFIG_PM_DEBUG */
++#else /* !CONFIG_PM_DEBUG */
++static inline int suspend_test(int level) { return 0; }
++#endif /* !CONFIG_PM_DEBUG */
+ #endif /* CONFIG_PM_SLEEP */
+ #ifdef CONFIG_SUSPEND
+-static int suspend_test(int level)
+-{
+-#ifdef CONFIG_PM_DEBUG
+-      if (pm_test_level == level) {
+-              printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
+-              mdelay(5000);
+-              return 1;
+-      }
+-#endif /* !CONFIG_PM_DEBUG */
+-      return 0;
+-}
+-
+ #ifdef CONFIG_PM_TEST_SUSPEND
+ /*
+@@ -298,12 +298,8 @@
+               goto Done;
+       }
+-      error = sysdev_suspend(PMSG_SUSPEND);
+-      if (!error) {
+-              if (!suspend_test(TEST_CORE))
+-                      error = suspend_ops->enter(state);
+-              sysdev_resume();
+-      }
++      if (!suspend_test(TEST_CORE))
++              error = suspend_ops->enter(state);
+       device_power_up(PMSG_RESUME);
+  Done:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/Makefile linux-2.6.29-rc3.owrt/kernel/power/Makefile
+--- linux-2.6.29.owrt/kernel/power/Makefile    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/Makefile        2009-05-10 23:48:29.000000000 +0200
+@@ -3,7 +3,7 @@
+ EXTRA_CFLAGS  +=      -DDEBUG
+ endif
+-obj-$(CONFIG_PM)              += main.o
++obj-y                         := main.o
+ obj-$(CONFIG_PM_SLEEP)                += console.o
+ obj-$(CONFIG_FREEZER)         += process.o
+ obj-$(CONFIG_HIBERNATION)     += swsusp.o disk.o snapshot.o swap.o user.o
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/swap.c linux-2.6.29-rc3.owrt/kernel/power/swap.c
+--- linux-2.6.29.owrt/kernel/power/swap.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/swap.c  2009-05-10 23:48:29.000000000 +0200
+@@ -60,7 +60,6 @@
+ static int submit(int rw, pgoff_t page_off, struct page *page,
+                       struct bio **bio_chain)
+ {
+-      const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+       struct bio *bio;
+       bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
+@@ -81,7 +80,7 @@
+       bio_get(bio);
+       if (bio_chain == NULL) {
+-              submit_bio(bio_rw, bio);
++              submit_bio(rw | (1 << BIO_RW_SYNC), bio);
+               wait_on_page_locked(page);
+               if (rw == READ)
+                       bio_set_pages_dirty(bio);
+@@ -91,7 +90,7 @@
+                       get_page(page); /* These pages are freed later */
+               bio->bi_private = *bio_chain;
+               *bio_chain = bio;
+-              submit_bio(bio_rw, bio);
++              submit_bio(rw | (1 << BIO_RW_SYNC), bio);
+       }
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/power/user.c linux-2.6.29-rc3.owrt/kernel/power/user.c
+--- linux-2.6.29.owrt/kernel/power/user.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/power/user.c  2009-05-10 23:48:29.000000000 +0200
+@@ -95,15 +95,15 @@
+               data->swap = swsusp_resume_device ?
+                       swap_type_of(swsusp_resume_device, 0, NULL) : -1;
+               data->mode = O_RDONLY;
+-              error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
++              error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
+               if (error)
+-                      pm_notifier_call_chain(PM_POST_HIBERNATION);
++                      pm_notifier_call_chain(PM_POST_RESTORE);
+       } else {
+               data->swap = -1;
+               data->mode = O_WRONLY;
+-              error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
++              error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
+               if (error)
+-                      pm_notifier_call_chain(PM_POST_RESTORE);
++                      pm_notifier_call_chain(PM_POST_HIBERNATION);
+       }
+       if (error)
+               atomic_inc(&snapshot_device_available);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/printk.c linux-2.6.29-rc3.owrt/kernel/printk.c
+--- linux-2.6.29.owrt/kernel/printk.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/printk.c      2009-05-10 23:48:29.000000000 +0200
+@@ -73,6 +73,7 @@
+  * driver system.
+  */
+ static DECLARE_MUTEX(console_sem);
++static DECLARE_MUTEX(secondary_console_sem);
+ struct console *console_drivers;
+ EXPORT_SYMBOL_GPL(console_drivers);
+@@ -890,14 +891,12 @@
+       printk("Suspending console(s) (use no_console_suspend to debug)\n");
+       acquire_console_sem();
+       console_suspended = 1;
+-      up(&console_sem);
+ }
+ void resume_console(void)
+ {
+       if (!console_suspend_enabled)
+               return;
+-      down(&console_sem);
+       console_suspended = 0;
+       release_console_sem();
+ }
+@@ -913,9 +912,11 @@
+ void acquire_console_sem(void)
+ {
+       BUG_ON(in_interrupt());
+-      down(&console_sem);
+-      if (console_suspended)
++      if (console_suspended) {
++              down(&secondary_console_sem);
+               return;
++      }
++      down(&console_sem);
+       console_locked = 1;
+       console_may_schedule = 1;
+ }
+@@ -925,10 +926,6 @@
+ {
+       if (down_trylock(&console_sem))
+               return -1;
+-      if (console_suspended) {
+-              up(&console_sem);
+-              return -1;
+-      }
+       console_locked = 1;
+       console_may_schedule = 0;
+       return 0;
+@@ -982,7 +979,7 @@
+       unsigned wake_klogd = 0;
+       if (console_suspended) {
+-              up(&console_sem);
++              up(&secondary_console_sem);
+               return;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/profile.c linux-2.6.29-rc3.owrt/kernel/profile.c
+--- linux-2.6.29.owrt/kernel/profile.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/profile.c     2009-05-10 23:48:29.000000000 +0200
+@@ -114,15 +114,12 @@
+       if (!slab_is_available()) {
+               prof_buffer = alloc_bootmem(buffer_bytes);
+               alloc_bootmem_cpumask_var(&prof_cpu_mask);
+-              cpumask_copy(prof_cpu_mask, cpu_possible_mask);
+               return 0;
+       }
+       if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
+               return -ENOMEM;
+-      cpumask_copy(prof_cpu_mask, cpu_possible_mask);
+-
+       prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+       if (prof_buffer)
+               return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/rcuclassic.c linux-2.6.29-rc3.owrt/kernel/rcuclassic.c
+--- linux-2.6.29.owrt/kernel/rcuclassic.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/rcuclassic.c  2009-05-10 23:48:29.000000000 +0200
+@@ -679,8 +679,8 @@
+ void rcu_check_callbacks(int cpu, int user)
+ {
+       if (user ||
+-          (idle_cpu(cpu) && rcu_scheduler_active &&
+-           !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
++          (idle_cpu(cpu) && !in_softirq() &&
++                              hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+               /*
+                * Get here if this CPU took its interrupt from user
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/rcupdate.c linux-2.6.29-rc3.owrt/kernel/rcupdate.c
+--- linux-2.6.29.owrt/kernel/rcupdate.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/rcupdate.c    2009-05-10 23:48:29.000000000 +0200
+@@ -44,7 +44,6 @@
+ #include <linux/cpu.h>
+ #include <linux/mutex.h>
+ #include <linux/module.h>
+-#include <linux/kernel_stat.h>
+ enum rcu_barrier {
+       RCU_BARRIER_STD,
+@@ -56,7 +55,6 @@
+ static atomic_t rcu_barrier_cpu_count;
+ static DEFINE_MUTEX(rcu_barrier_mutex);
+ static struct completion rcu_barrier_completion;
+-int rcu_scheduler_active __read_mostly;
+ /*
+  * Awaken the corresponding synchronize_rcu() instance now that a
+@@ -82,10 +80,6 @@
+ void synchronize_rcu(void)
+ {
+       struct rcu_synchronize rcu;
+-
+-      if (rcu_blocking_is_gp())
+-              return;
+-
+       init_completion(&rcu.completion);
+       /* Will wake me after RCU finished. */
+       call_rcu(&rcu.head, wakeme_after_rcu);
+@@ -181,9 +175,3 @@
+       __rcu_init();
+ }
+-void rcu_scheduler_starting(void)
+-{
+-      WARN_ON(num_online_cpus() != 1);
+-      WARN_ON(nr_context_switches() > 0);
+-      rcu_scheduler_active = 1;
+-}
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/rcupreempt.c linux-2.6.29-rc3.owrt/kernel/rcupreempt.c
+--- linux-2.6.29.owrt/kernel/rcupreempt.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/rcupreempt.c  2009-05-10 23:48:29.000000000 +0200
+@@ -1181,9 +1181,6 @@
+ {
+       struct rcu_synchronize rcu;
+-      if (num_online_cpus() == 1)
+-              return;  /* blocking is gp if only one CPU! */
+-
+       init_completion(&rcu.completion);
+       /* Will wake me after RCU finished. */
+       call_rcu_sched(&rcu.head, wakeme_after_rcu);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/rcutree.c linux-2.6.29-rc3.owrt/kernel/rcutree.c
+--- linux-2.6.29.owrt/kernel/rcutree.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/rcutree.c     2009-05-10 23:48:29.000000000 +0200
+@@ -948,8 +948,8 @@
+ void rcu_check_callbacks(int cpu, int user)
+ {
+       if (user ||
+-          (idle_cpu(cpu) && rcu_scheduler_active &&
+-           !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
++          (idle_cpu(cpu) && !in_softirq() &&
++                              hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+               /*
+                * Get here if this CPU took its interrupt from user
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sched.c linux-2.6.29-rc3.owrt/kernel/sched.c
+--- linux-2.6.29.owrt/kernel/sched.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sched.c       2009-05-10 23:48:29.000000000 +0200
+@@ -223,7 +223,7 @@
+ {
+       ktime_t now;
+-      if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
++      if (rt_bandwidth_enabled() && rt_b->rt_runtime == RUNTIME_INF)
+               return;
+       if (hrtimer_active(&rt_b->rt_period_timer))
+@@ -3880,24 +3880,19 @@
+       int cpu = smp_processor_id();
+       if (stop_tick) {
++              cpumask_set_cpu(cpu, nohz.cpu_mask);
+               cpu_rq(cpu)->in_nohz_recently = 1;
+-              if (!cpu_active(cpu)) {
+-                      if (atomic_read(&nohz.load_balancer) != cpu)
+-                              return 0;
+-
+-                      /*
+-                       * If we are going offline and still the leader,
+-                       * give up!
+-                       */
++              /*
++               * If we are going offline and still the leader, give up!
++               */
++              if (!cpu_active(cpu) &&
++                  atomic_read(&nohz.load_balancer) == cpu) {
+                       if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
+                               BUG();
+-
+                       return 0;
+               }
+-              cpumask_set_cpu(cpu, nohz.cpu_mask);
+-
+               /* time for ilb owner also to sleep */
+               if (cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
+                       if (atomic_read(&nohz.load_balancer) == cpu)
+@@ -4692,8 +4687,8 @@
+  * started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
+  * zero in this (rare) case, and we handle it by continuing to scan the queue.
+  */
+-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+-                      int nr_exclusive, int sync, void *key)
++static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
++                           int nr_exclusive, int sync, void *key)
+ {
+       wait_queue_t *curr, *next;
+@@ -6945,26 +6940,20 @@
+ static void rq_attach_root(struct rq *rq, struct root_domain *rd)
+ {
+-      struct root_domain *old_rd = NULL;
+       unsigned long flags;
+       spin_lock_irqsave(&rq->lock, flags);
+       if (rq->rd) {
+-              old_rd = rq->rd;
++              struct root_domain *old_rd = rq->rd;
+               if (cpumask_test_cpu(rq->cpu, old_rd->online))
+                       set_rq_offline(rq);
+               cpumask_clear_cpu(rq->cpu, old_rd->span);
+-              /*
+-               * If we dont want to free the old_rt yet then
+-               * set old_rd to NULL to skip the freeing later
+-               * in this function:
+-               */
+-              if (!atomic_dec_and_test(&old_rd->refcount))
+-                      old_rd = NULL;
++              if (atomic_dec_and_test(&old_rd->refcount))
++                      free_rootdomain(old_rd);
+       }
+       atomic_inc(&rd->refcount);
+@@ -6975,9 +6964,6 @@
+               set_rq_online(rq);
+       spin_unlock_irqrestore(&rq->lock, flags);
+-
+-      if (old_rd)
+-              free_rootdomain(old_rd);
+ }
+ static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
+@@ -9225,16 +9211,6 @@
+       return ret;
+ }
+-
+-int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk)
+-{
+-      /* Don't accept realtime tasks when there is no way for them to run */
+-      if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0)
+-              return 0;
+-
+-      return 1;
+-}
+-
+ #else /* !CONFIG_RT_GROUP_SCHED */
+ static int sched_rt_global_constraints(void)
+ {
+@@ -9328,7 +9304,8 @@
+                     struct task_struct *tsk)
+ {
+ #ifdef CONFIG_RT_GROUP_SCHED
+-      if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
++      /* Don't accept realtime tasks when there is no way for them to run */
++      if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0)
+               return -EINVAL;
+ #else
+       /* We don't support RT-tasks being in separate groups */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sched_fair.c linux-2.6.29-rc3.owrt/kernel/sched_fair.c
+--- linux-2.6.29.owrt/kernel/sched_fair.c      2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sched_fair.c  2009-05-10 23:48:29.000000000 +0200
+@@ -719,7 +719,7 @@
+               __enqueue_entity(cfs_rq, se);
+ }
+-static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
++static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
+ {
+       if (cfs_rq->last == se)
+               cfs_rq->last = NULL;
+@@ -728,12 +728,6 @@
+               cfs_rq->next = NULL;
+ }
+-static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
+-{
+-      for_each_sched_entity(se)
+-              __clear_buddies(cfs_rq_of(se), se);
+-}
+-
+ static void
+ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep)
+ {
+@@ -774,14 +768,8 @@
+       ideal_runtime = sched_slice(cfs_rq, curr);
+       delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime;
+-      if (delta_exec > ideal_runtime) {
++      if (delta_exec > ideal_runtime)
+               resched_task(rq_of(cfs_rq)->curr);
+-              /*
+-               * The current task ran long enough, ensure it doesn't get
+-               * re-elected due to buddy favours.
+-               */
+-              clear_buddies(cfs_rq, curr);
+-      }
+ }
+ static void
+@@ -1464,11 +1452,6 @@
+       do {
+               se = pick_next_entity(cfs_rq);
+-              /*
+-               * If se was a buddy, clear it so that it will have to earn
+-               * the favour again.
+-               */
+-              __clear_buddies(cfs_rq, se);
+               set_next_entity(cfs_rq, se);
+               cfs_rq = group_cfs_rq(se);
+       } while (cfs_rq);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sched_rt.c linux-2.6.29-rc3.owrt/kernel/sched_rt.c
+--- linux-2.6.29.owrt/kernel/sched_rt.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sched_rt.c    2009-05-10 23:48:29.000000000 +0200
+@@ -968,8 +968,8 @@
+       if ((this_cpu != -1) && cpu_isset(this_cpu, *mask))
+               return this_cpu;
+-      first = cpumask_first(mask);
+-      if (first < nr_cpu_ids)
++      first = first_cpu(*mask);
++      if (first != NR_CPUS)
+               return first;
+       return -1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sched_stats.h linux-2.6.29-rc3.owrt/kernel/sched_stats.h
+--- linux-2.6.29.owrt/kernel/sched_stats.h     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sched_stats.h 2009-05-10 23:48:29.000000000 +0200
+@@ -296,21 +296,19 @@
+ static inline void account_group_user_time(struct task_struct *tsk,
+                                          cputime_t cputime)
+ {
+-      struct thread_group_cputimer *cputimer;
++      struct task_cputime *times;
++      struct signal_struct *sig;
+       /* tsk == current, ensure it is safe to use ->signal */
+       if (unlikely(tsk->exit_state))
+               return;
+-      cputimer = &tsk->signal->cputimer;
+-
+-      if (!cputimer->running)
+-              return;
++      sig = tsk->signal;
++      times = &sig->cputime.totals;
+-      spin_lock(&cputimer->lock);
+-      cputimer->cputime.utime =
+-              cputime_add(cputimer->cputime.utime, cputime);
+-      spin_unlock(&cputimer->lock);
++      spin_lock(&times->lock);
++      times->utime = cputime_add(times->utime, cputime);
++      spin_unlock(&times->lock);
+ }
+ /**
+@@ -326,21 +324,19 @@
+ static inline void account_group_system_time(struct task_struct *tsk,
+                                            cputime_t cputime)
+ {
+-      struct thread_group_cputimer *cputimer;
++      struct task_cputime *times;
++      struct signal_struct *sig;
+       /* tsk == current, ensure it is safe to use ->signal */
+       if (unlikely(tsk->exit_state))
+               return;
+-      cputimer = &tsk->signal->cputimer;
+-
+-      if (!cputimer->running)
+-              return;
++      sig = tsk->signal;
++      times = &sig->cputime.totals;
+-      spin_lock(&cputimer->lock);
+-      cputimer->cputime.stime =
+-              cputime_add(cputimer->cputime.stime, cputime);
+-      spin_unlock(&cputimer->lock);
++      spin_lock(&times->lock);
++      times->stime = cputime_add(times->stime, cputime);
++      spin_unlock(&times->lock);
+ }
+ /**
+@@ -356,7 +352,7 @@
+ static inline void account_group_exec_runtime(struct task_struct *tsk,
+                                             unsigned long long ns)
+ {
+-      struct thread_group_cputimer *cputimer;
++      struct task_cputime *times;
+       struct signal_struct *sig;
+       sig = tsk->signal;
+@@ -365,12 +361,9 @@
+       if (unlikely(!sig))
+               return;
+-      cputimer = &sig->cputimer;
+-
+-      if (!cputimer->running)
+-              return;
++      times = &sig->cputime.totals;
+-      spin_lock(&cputimer->lock);
+-      cputimer->cputime.sum_exec_runtime += ns;
+-      spin_unlock(&cputimer->lock);
++      spin_lock(&times->lock);
++      times->sum_exec_runtime += ns;
++      spin_unlock(&times->lock);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/seccomp.c linux-2.6.29-rc3.owrt/kernel/seccomp.c
+--- linux-2.6.29.owrt/kernel/seccomp.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/seccomp.c     2009-05-10 23:48:29.000000000 +0200
+@@ -8,7 +8,6 @@
+ #include <linux/seccomp.h>
+ #include <linux/sched.h>
+-#include <linux/compat.h>
+ /* #define SECCOMP_DEBUG 1 */
+ #define NR_SECCOMP_MODES 1
+@@ -23,7 +22,7 @@
+       0, /* null terminated */
+ };
+-#ifdef CONFIG_COMPAT
++#ifdef TIF_32BIT
+ static int mode1_syscalls_32[] = {
+       __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
+       0, /* null terminated */
+@@ -38,8 +37,8 @@
+       switch (mode) {
+       case 1:
+               syscall = mode1_syscalls;
+-#ifdef CONFIG_COMPAT
+-              if (is_compat_task())
++#ifdef TIF_32BIT
++              if (test_thread_flag(TIF_32BIT))
+                       syscall = mode1_syscalls_32;
+ #endif
+               do {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/signal.c linux-2.6.29-rc3.owrt/kernel/signal.c
+--- linux-2.6.29.owrt/kernel/signal.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/signal.c      2009-05-10 23:48:29.000000000 +0200
+@@ -909,9 +909,7 @@
+       }
+ #endif
+       printk("\n");
+-      preempt_disable();
+       show_regs(regs);
+-      preempt_enable();
+ }
+ static int __init setup_print_fatal_signals(char *str)
+@@ -1367,6 +1365,7 @@
+       struct siginfo info;
+       unsigned long flags;
+       struct sighand_struct *psig;
++      struct task_cputime cputime;
+       int ret = sig;
+       BUG_ON(sig == -1);
+@@ -1396,10 +1395,9 @@
+       info.si_uid = __task_cred(tsk)->uid;
+       rcu_read_unlock();
+-      info.si_utime = cputime_to_clock_t(cputime_add(tsk->utime,
+-                              tsk->signal->utime));
+-      info.si_stime = cputime_to_clock_t(cputime_add(tsk->stime,
+-                              tsk->signal->stime));
++      thread_group_cputime(tsk, &cputime);
++      info.si_utime = cputime_to_jiffies(cputime.utime);
++      info.si_stime = cputime_to_jiffies(cputime.stime);
+       info.si_status = tsk->exit_code & 0x7f;
+       if (tsk->exit_code & 0x80)
+@@ -1575,15 +1573,7 @@
+       read_lock(&tasklist_lock);
+       if (may_ptrace_stop()) {
+               do_notify_parent_cldstop(current, CLD_TRAPPED);
+-              /*
+-               * Don't want to allow preemption here, because
+-               * sys_ptrace() needs this task to be inactive.
+-               *
+-               * XXX: implement read_unlock_no_resched().
+-               */
+-              preempt_disable();
+               read_unlock(&tasklist_lock);
+-              preempt_enable_no_resched();
+               schedule();
+       } else {
+               /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/smp.c linux-2.6.29-rc3.owrt/kernel/smp.c
+--- linux-2.6.29.owrt/kernel/smp.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/smp.c 2009-05-10 23:48:29.000000000 +0200
+@@ -18,7 +18,6 @@
+ enum {
+       CSD_FLAG_WAIT           = 0x01,
+       CSD_FLAG_ALLOC          = 0x02,
+-      CSD_FLAG_LOCK           = 0x04,
+ };
+ struct call_function_data {
+@@ -187,9 +186,6 @@
+                       if (data_flags & CSD_FLAG_WAIT) {
+                               smp_wmb();
+                               data->flags &= ~CSD_FLAG_WAIT;
+-                      } else if (data_flags & CSD_FLAG_LOCK) {
+-                              smp_wmb();
+-                              data->flags &= ~CSD_FLAG_LOCK;
+                       } else if (data_flags & CSD_FLAG_ALLOC)
+                               kfree(data);
+               }
+@@ -200,8 +196,6 @@
+       }
+ }
+-static DEFINE_PER_CPU(struct call_single_data, csd_data);
+-
+ /*
+  * smp_call_function_single - Run a function on a specific CPU
+  * @func: The function to run. This must be fast and non-blocking.
+@@ -230,38 +224,14 @@
+               func(info);
+               local_irq_restore(flags);
+       } else if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) {
+-              struct call_single_data *data;
++              struct call_single_data *data = NULL;
+               if (!wait) {
+-                      /*
+-                       * We are calling a function on a single CPU
+-                       * and we are not going to wait for it to finish.
+-                       * We first try to allocate the data, but if we
+-                       * fail, we fall back to use a per cpu data to pass
+-                       * the information to that CPU. Since all callers
+-                       * of this code will use the same data, we must
+-                       * synchronize the callers to prevent a new caller
+-                       * from corrupting the data before the callee
+-                       * can access it.
+-                       *
+-                       * The CSD_FLAG_LOCK is used to let us know when
+-                       * the IPI handler is done with the data.
+-                       * The first caller will set it, and the callee
+-                       * will clear it. The next caller must wait for
+-                       * it to clear before we set it again. This
+-                       * will make sure the callee is done with the
+-                       * data before a new caller will use it.
+-                       */
+                       data = kmalloc(sizeof(*data), GFP_ATOMIC);
+                       if (data)
+                               data->flags = CSD_FLAG_ALLOC;
+-                      else {
+-                              data = &per_cpu(csd_data, me);
+-                              while (data->flags & CSD_FLAG_LOCK)
+-                                      cpu_relax();
+-                              data->flags = CSD_FLAG_LOCK;
+-                      }
+-              } else {
++              }
++              if (!data) {
+                       data = &d;
+                       data->flags = CSD_FLAG_WAIT;
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/softirq.c linux-2.6.29-rc3.owrt/kernel/softirq.c
+--- linux-2.6.29.owrt/kernel/softirq.c 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/softirq.c     2009-05-10 23:48:29.000000000 +0200
+@@ -626,7 +626,6 @@
+                       preempt_enable_no_resched();
+                       cond_resched();
+                       preempt_disable();
+-                      rcu_qsctr_inc((long)__bind_cpu);
+               }
+               preempt_enable();
+               set_current_state(TASK_INTERRUPTIBLE);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sys.c linux-2.6.29-rc3.owrt/kernel/sys.c
+--- linux-2.6.29.owrt/kernel/sys.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sys.c 2009-05-10 23:48:29.000000000 +0200
+@@ -559,7 +559,7 @@
+       abort_creds(new);
+       return retval;
+ }
+-
++  
+ /*
+  * change the user struct in a credentials set to match the new UID
+  */
+@@ -571,11 +571,6 @@
+       if (!new_user)
+               return -EAGAIN;
+-      if (!task_can_switch_user(new_user, current)) {
+-              free_uid(new_user);
+-              return -EINVAL;
+-      }
+-
+       if (atomic_read(&new_user->processes) >=
+                               current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
+                       new_user != INIT_USER) {
+@@ -636,11 +631,10 @@
+                       goto error;
+       }
+-      if (new->uid != old->uid) {
+-              retval = set_user(new);
+-              if (retval < 0)
+-                      goto error;
+-      }
++      retval = -EAGAIN;
++      if (new->uid != old->uid && set_user(new) < 0)
++              goto error;
++
+       if (ruid != (uid_t) -1 ||
+           (euid != (uid_t) -1 && euid != old->uid))
+               new->suid = new->euid;
+@@ -686,10 +680,9 @@
+       retval = -EPERM;
+       if (capable(CAP_SETUID)) {
+               new->suid = new->uid = uid;
+-              if (uid != old->uid) {
+-                      retval = set_user(new);
+-                      if (retval < 0)
+-                              goto error;
++              if (uid != old->uid && set_user(new) < 0) {
++                      retval = -EAGAIN;
++                      goto error;
+               }
+       } else if (uid != old->uid && uid != new->suid) {
+               goto error;
+@@ -741,13 +734,11 @@
+                       goto error;
+       }
++      retval = -EAGAIN;
+       if (ruid != (uid_t) -1) {
+               new->uid = ruid;
+-              if (ruid != old->uid) {
+-                      retval = set_user(new);
+-                      if (retval < 0)
+-                              goto error;
+-              }
++              if (ruid != old->uid && set_user(new) < 0)
++                      goto error;
+       }
+       if (euid != (uid_t) -1)
+               new->euid = euid;
+@@ -1534,14 +1525,22 @@
+               return -EINVAL;
+       if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
+               return -EFAULT;
+-      if (new_rlim.rlim_cur > new_rlim.rlim_max)
+-              return -EINVAL;
+       old_rlim = current->signal->rlim + resource;
+       if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
+           !capable(CAP_SYS_RESOURCE))
+               return -EPERM;
+-      if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
+-              return -EPERM;
++
++      if (resource == RLIMIT_NOFILE) {
++              if (new_rlim.rlim_max == RLIM_INFINITY)
++                      new_rlim.rlim_max = sysctl_nr_open;
++              if (new_rlim.rlim_cur == RLIM_INFINITY)
++                      new_rlim.rlim_cur = sysctl_nr_open;
++              if (new_rlim.rlim_max > sysctl_nr_open)
++                      return -EPERM;
++      }
++
++      if (new_rlim.rlim_cur > new_rlim.rlim_max)
++              return -EINVAL;
+       retval = security_task_setrlimit(resource, &new_rlim);
+       if (retval)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/sysctl.c linux-2.6.29-rc3.owrt/kernel/sysctl.c
+--- linux-2.6.29.owrt/kernel/sysctl.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/sysctl.c      2009-05-10 23:48:29.000000000 +0200
+@@ -101,7 +101,6 @@
+ static int zero;
+ static int one = 1;
+-static unsigned long one_ul = 1;
+ static int one_hundred = 100;
+ /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
+@@ -975,7 +974,7 @@
+               .mode           = 0644,
+               .proc_handler   = &dirty_background_bytes_handler,
+               .strategy       = &sysctl_intvec,
+-              .extra1         = &one_ul,
++              .extra1         = &one,
+       },
+       {
+               .ctl_name       = VM_DIRTY_RATIO,
+@@ -996,7 +995,7 @@
+               .mode           = 0644,
+               .proc_handler   = &dirty_bytes_handler,
+               .strategy       = &sysctl_intvec,
+-              .extra1         = &one_ul,
++              .extra1         = &one,
+       },
+       {
+               .procname       = "dirty_writeback_centisecs",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/time/tick-common.c linux-2.6.29-rc3.owrt/kernel/time/tick-common.c
+--- linux-2.6.29.owrt/kernel/time/tick-common.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/time/tick-common.c    2009-05-10 23:48:29.000000000 +0200
+@@ -274,21 +274,6 @@
+ }
+ /*
+- * Transfer the do_timer job away from a dying cpu.
+- *
+- * Called with interrupts disabled.
+- */
+-static void tick_handover_do_timer(int *cpup)
+-{
+-      if (*cpup == tick_do_timer_cpu) {
+-              int cpu = cpumask_first(cpu_online_mask);
+-
+-              tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu :
+-                      TICK_DO_TIMER_NONE;
+-      }
+-}
+-
+-/*
+  * Shutdown an event device on a given cpu:
+  *
+  * This is called on a life CPU, when a CPU is dead. So we cannot
+@@ -312,6 +297,13 @@
+               clockevents_exchange_device(dev, NULL);
+               td->evtdev = NULL;
+       }
++      /* Transfer the do_timer job away from this cpu */
++      if (*cpup == tick_do_timer_cpu) {
++              int cpu = cpumask_first(cpu_online_mask);
++
++              tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu :
++                      TICK_DO_TIMER_NONE;
++      }
+       spin_unlock_irqrestore(&tick_device_lock, flags);
+ }
+@@ -365,10 +357,6 @@
+               tick_broadcast_oneshot_control(reason);
+               break;
+-      case CLOCK_EVT_NOTIFY_CPU_DYING:
+-              tick_handover_do_timer(dev);
+-              break;
+-
+       case CLOCK_EVT_NOTIFY_CPU_DEAD:
+               tick_shutdown_broadcast_oneshot(dev);
+               tick_shutdown_broadcast(dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/ftrace.c linux-2.6.29-rc3.owrt/kernel/trace/ftrace.c
+--- linux-2.6.29.owrt/kernel/trace/ftrace.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/ftrace.c        2009-05-10 23:48:29.000000000 +0200
+@@ -17,7 +17,6 @@
+ #include <linux/clocksource.h>
+ #include <linux/kallsyms.h>
+ #include <linux/seq_file.h>
+-#include <linux/suspend.h>
+ #include <linux/debugfs.h>
+ #include <linux/hardirq.h>
+ #include <linux/kthread.h>
+@@ -1737,12 +1736,9 @@
+ {
+       struct task_struct *p;
+-      rcu_read_lock();
+       do_each_pid_task(pid, PIDTYPE_PID, p) {
+               clear_tsk_trace_trace(p);
+       } while_each_pid_task(pid, PIDTYPE_PID, p);
+-      rcu_read_unlock();
+-
+       put_pid(pid);
+ }
+@@ -1750,11 +1746,9 @@
+ {
+       struct task_struct *p;
+-      rcu_read_lock();
+       do_each_pid_task(pid, PIDTYPE_PID, p) {
+               set_tsk_trace_trace(p);
+       } while_each_pid_task(pid, PIDTYPE_PID, p);
+-      rcu_read_unlock();
+ }
+ static void clear_ftrace_pid_task(struct pid **pid)
+@@ -1971,7 +1965,6 @@
+ #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ static atomic_t ftrace_graph_active;
+-static struct notifier_block ftrace_suspend_notifier;
+ int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
+ {
+@@ -2033,7 +2026,7 @@
+ static int start_graph_tracing(void)
+ {
+       struct ftrace_ret_stack **ret_stack_list;
+-      int ret, cpu;
++      int ret;
+       ret_stack_list = kmalloc(FTRACE_RETSTACK_ALLOC_SIZE *
+                               sizeof(struct ftrace_ret_stack *),
+@@ -2042,10 +2035,6 @@
+       if (!ret_stack_list)
+               return -ENOMEM;
+-      /* The cpu_boot init_task->ret_stack will never be freed */
+-      for_each_online_cpu(cpu)
+-              ftrace_graph_init_task(idle_task(cpu));
+-
+       do {
+               ret = alloc_retstack_tasklist(ret_stack_list);
+       } while (ret == -EAGAIN);
+@@ -2054,27 +2043,6 @@
+       return ret;
+ }
+-/*
+- * Hibernation protection.
+- * The state of the current task is too much unstable during
+- * suspend/restore to disk. We want to protect against that.
+- */
+-static int
+-ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state,
+-                                                      void *unused)
+-{
+-      switch (state) {
+-      case PM_HIBERNATION_PREPARE:
+-              pause_graph_tracing();
+-              break;
+-
+-      case PM_POST_HIBERNATION:
+-              unpause_graph_tracing();
+-              break;
+-      }
+-      return NOTIFY_DONE;
+-}
+-
+ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+                       trace_func_graph_ent_t entryfunc)
+ {
+@@ -2082,9 +2050,6 @@
+       mutex_lock(&ftrace_sysctl_lock);
+-      ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call;
+-      register_pm_notifier(&ftrace_suspend_notifier);
+-
+       atomic_inc(&ftrace_graph_active);
+       ret = start_graph_tracing();
+       if (ret) {
+@@ -2110,7 +2075,6 @@
+       ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
+       ftrace_graph_entry = ftrace_graph_entry_stub;
+       ftrace_shutdown(FTRACE_STOP_FUNC_RET);
+-      unregister_pm_notifier(&ftrace_suspend_notifier);
+       mutex_unlock(&ftrace_sysctl_lock);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/Kconfig linux-2.6.29-rc3.owrt/kernel/trace/Kconfig
+--- linux-2.6.29.owrt/kernel/trace/Kconfig     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/Kconfig 2009-05-10 23:48:29.000000000 +0200
+@@ -52,7 +52,6 @@
+       depends on HAVE_FUNCTION_TRACER
+       depends on DEBUG_KERNEL
+       select FRAME_POINTER
+-      select KALLSYMS
+       select TRACING
+       select CONTEXT_SWITCH_TRACER
+       help
+@@ -239,7 +238,6 @@
+       depends on DEBUG_KERNEL
+       select FUNCTION_TRACER
+       select STACKTRACE
+-      select KALLSYMS
+       help
+         This special tracer records the maximum stack footprint of the
+         kernel and displays it in debugfs/tracing/stack_trace.
+@@ -304,27 +302,4 @@
+         functioning properly. It will do tests on all the configured
+         tracers of ftrace.
+-config MMIOTRACE
+-      bool "Memory mapped IO tracing"
+-      depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
+-      select TRACING
+-      help
+-        Mmiotrace traces Memory Mapped I/O access and is meant for
+-        debugging and reverse engineering. It is called from the ioremap
+-        implementation and works via page faults. Tracing is disabled by
+-        default and can be enabled at run-time.
+-
+-        See Documentation/tracers/mmiotrace.txt.
+-        If you are not helping to develop drivers, say N.
+-
+-config MMIOTRACE_TEST
+-      tristate "Test module for mmiotrace"
+-      depends on MMIOTRACE && m
+-      help
+-        This is a dumb module for testing mmiotrace. It is very dangerous
+-        as it will write garbage to IO memory starting at a given address.
+-        However, it should be safe to use on e.g. unused portion of VRAM.
+-
+-        Say N, unless you absolutely know what you are doing.
+-
+ endmenu
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/ring_buffer.c linux-2.6.29-rc3.owrt/kernel/trace/ring_buffer.c
+--- linux-2.6.29.owrt/kernel/trace/ring_buffer.c       2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/ring_buffer.c   2009-05-10 23:48:29.000000000 +0200
+@@ -246,7 +246,7 @@
+       return 0;
+ }
+-#define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data))
++#define BUF_PAGE_SIZE (PAGE_SIZE - sizeof(struct buffer_data_page))
+ /*
+  * head_page == tail_page && head == tail then buffer is empty.
+@@ -1025,8 +1025,12 @@
+               }
+               if (next_page == head_page) {
+-                      if (!(buffer->flags & RB_FL_OVERWRITE))
++                      if (!(buffer->flags & RB_FL_OVERWRITE)) {
++                              /* reset write */
++                              if (tail <= BUF_PAGE_SIZE)
++                                      local_set(&tail_page->write, tail);
+                               goto out_unlock;
++                      }
+                       /* tail_page has not moved yet? */
+                       if (tail_page == cpu_buffer->tail_page) {
+@@ -1101,10 +1105,6 @@
+       return event;
+  out_unlock:
+-      /* reset write */
+-      if (tail <= BUF_PAGE_SIZE)
+-              local_set(&tail_page->write, tail);
+-
+       __raw_spin_unlock(&cpu_buffer->lock);
+       local_irq_restore(flags);
+       return NULL;
+@@ -2174,9 +2174,6 @@
+       cpu_buffer->overrun = 0;
+       cpu_buffer->entries = 0;
+-
+-      cpu_buffer->write_stamp = 0;
+-      cpu_buffer->read_stamp = 0;
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/trace.c linux-2.6.29-rc3.owrt/kernel/trace/trace.c
+--- linux-2.6.29.owrt/kernel/trace/trace.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/trace.c 2009-05-10 23:48:29.000000000 +0200
+@@ -40,7 +40,7 @@
+ #define TRACE_BUFFER_FLAGS    (RB_FL_OVERWRITE)
+-unsigned long __read_mostly   tracing_max_latency;
++unsigned long __read_mostly   tracing_max_latency = (cycle_t)ULONG_MAX;
+ unsigned long __read_mostly   tracing_thresh;
+ /*
+@@ -3736,7 +3736,7 @@
+  * it if we decide to change what log level the ftrace dump
+  * should be at.
+  */
+-#define KERN_TRACE            KERN_EMERG
++#define KERN_TRACE            KERN_INFO
+ static void
+ trace_printk_seq(struct trace_seq *s)
+@@ -3770,7 +3770,6 @@
+       dump_ran = 1;
+       /* No turning back! */
+-      tracing_off();
+       ftrace_kill();
+       for_each_tracing_cpu(cpu) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/trace_irqsoff.c linux-2.6.29-rc3.owrt/kernel/trace/trace_irqsoff.c
+--- linux-2.6.29.owrt/kernel/trace/trace_irqsoff.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/trace_irqsoff.c 2009-05-10 23:48:29.000000000 +0200
+@@ -380,7 +380,6 @@
+ static void __irqsoff_tracer_init(struct trace_array *tr)
+ {
+-      tracing_max_latency = 0;
+       irqsoff_trace = tr;
+       /* make sure that the tracer is visible */
+       smp_wmb();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/trace_mmiotrace.c linux-2.6.29-rc3.owrt/kernel/trace/trace_mmiotrace.c
+--- linux-2.6.29.owrt/kernel/trace/trace_mmiotrace.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/trace_mmiotrace.c       2009-05-10 23:48:29.000000000 +0200
+@@ -9,7 +9,6 @@
+ #include <linux/kernel.h>
+ #include <linux/mmiotrace.h>
+ #include <linux/pci.h>
+-#include <asm/atomic.h>
+ #include "trace.h"
+@@ -20,7 +19,6 @@
+ static struct trace_array *mmio_trace_array;
+ static bool overrun_detected;
+ static unsigned long prev_overruns;
+-static atomic_t dropped_count;
+ static void mmio_reset_data(struct trace_array *tr)
+ {
+@@ -123,11 +121,11 @@
+ static unsigned long count_overruns(struct trace_iterator *iter)
+ {
+-      unsigned long cnt = atomic_xchg(&dropped_count, 0);
++      unsigned long cnt = 0;
+       unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+       if (over > prev_overruns)
+-              cnt += over - prev_overruns;
++              cnt = over - prev_overruns;
+       prev_overruns = over;
+       return cnt;
+ }
+@@ -312,10 +310,8 @@
+       event   = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
+                                          &irq_flags);
+-      if (!event) {
+-              atomic_inc(&dropped_count);
++      if (!event)
+               return;
+-      }
+       entry   = ring_buffer_event_data(event);
+       tracing_generic_entry_update(&entry->ent, 0, preempt_count());
+       entry->ent.type                 = TRACE_MMIO_RW;
+@@ -342,10 +338,8 @@
+       event   = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
+                                          &irq_flags);
+-      if (!event) {
+-              atomic_inc(&dropped_count);
++      if (!event)
+               return;
+-      }
+       entry   = ring_buffer_event_data(event);
+       tracing_generic_entry_update(&entry->ent, 0, preempt_count());
+       entry->ent.type                 = TRACE_MMIO_MAP;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/trace_sched_wakeup.c linux-2.6.29-rc3.owrt/kernel/trace/trace_sched_wakeup.c
+--- linux-2.6.29.owrt/kernel/trace/trace_sched_wakeup.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/trace_sched_wakeup.c    2009-05-10 23:48:29.000000000 +0200
+@@ -333,7 +333,6 @@
+ static int wakeup_tracer_init(struct trace_array *tr)
+ {
+-      tracing_max_latency = 0;
+       wakeup_trace = tr;
+       start_wakeup_tracer(tr);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/trace/trace_selftest.c linux-2.6.29-rc3.owrt/kernel/trace/trace_selftest.c
+--- linux-2.6.29.owrt/kernel/trace/trace_selftest.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/trace/trace_selftest.c        2009-05-10 23:48:29.000000000 +0200
+@@ -23,20 +23,10 @@
+ {
+       struct ring_buffer_event *event;
+       struct trace_entry *entry;
+-      unsigned int loops = 0;
+       while ((event = ring_buffer_consume(tr->buffer, cpu, NULL))) {
+               entry = ring_buffer_event_data(event);
+-              /*
+-               * The ring buffer is a size of trace_buf_size, if
+-               * we loop more than the size, there's something wrong
+-               * with the ring buffer.
+-               */
+-              if (loops++ > trace_buf_size) {
+-                      printk(KERN_CONT ".. bad ring buffer ");
+-                      goto failed;
+-              }
+               if (!trace_valid_entry(entry)) {
+                       printk(KERN_CONT ".. invalid entry %d ",
+                               entry->type);
+@@ -67,20 +57,11 @@
+       cnt = ring_buffer_entries(tr->buffer);
+-      /*
+-       * The trace_test_buffer_cpu runs a while loop to consume all data.
+-       * If the calling tracer is broken, and is constantly filling
+-       * the buffer, this will run forever, and hard lock the box.
+-       * We disable the ring buffer while we do this test to prevent
+-       * a hard lock up.
+-       */
+-      tracing_off();
+       for_each_possible_cpu(cpu) {
+               ret = trace_test_buffer_cpu(tr, cpu);
+               if (ret)
+                       break;
+       }
+-      tracing_on();
+       __raw_spin_unlock(&ftrace_max_lock);
+       local_irq_restore(flags);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/tsacct.c linux-2.6.29-rc3.owrt/kernel/tsacct.c
+--- linux-2.6.29.owrt/kernel/tsacct.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/tsacct.c      2009-05-10 23:48:29.000000000 +0200
+@@ -122,10 +122,8 @@
+       if (likely(tsk->mm)) {
+               cputime_t time, dtime;
+               struct timeval value;
+-              unsigned long flags;
+               u64 delta;
+-              local_irq_save(flags);
+               time = tsk->stime + tsk->utime;
+               dtime = cputime_sub(time, tsk->acct_timexpd);
+               jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
+@@ -133,12 +131,10 @@
+               delta = delta * USEC_PER_SEC + value.tv_usec;
+               if (delta == 0)
+-                      goto out;
++                      return;
+               tsk->acct_timexpd = time;
+               tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
+               tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+-      out:
+-              local_irq_restore(flags);
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/user.c linux-2.6.29-rc3.owrt/kernel/user.c
+--- linux-2.6.29.owrt/kernel/user.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/user.c        2009-05-10 23:48:29.000000000 +0200
+@@ -72,7 +72,6 @@
+ static void uid_hash_remove(struct user_struct *up)
+ {
+       hlist_del_init(&up->uidhash_node);
+-      put_user_ns(up->user_ns);
+ }
+ static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
+@@ -286,12 +285,14 @@
+ /* work function to remove sysfs directory for a user and free up
+  * corresponding structures.
+  */
+-static void cleanup_user_struct(struct work_struct *w)
++static void remove_user_sysfs_dir(struct work_struct *w)
+ {
+       struct user_struct *up = container_of(w, struct user_struct, work);
+       unsigned long flags;
+       int remove_user = 0;
++      if (up->user_ns != &init_user_ns)
++              return;
+       /* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
+        * atomic.
+        */
+@@ -310,11 +311,9 @@
+       if (!remove_user)
+               goto done;
+-      if (up->user_ns == &init_user_ns) {
+-              kobject_uevent(&up->kobj, KOBJ_REMOVE);
+-              kobject_del(&up->kobj);
+-              kobject_put(&up->kobj);
+-      }
++      kobject_uevent(&up->kobj, KOBJ_REMOVE);
++      kobject_del(&up->kobj);
++      kobject_put(&up->kobj);
+       sched_destroy_user(up);
+       key_put(up->uid_keyring);
+@@ -335,7 +334,8 @@
+       atomic_inc(&up->__count);
+       spin_unlock_irqrestore(&uidhash_lock, flags);
+-      INIT_WORK(&up->work, cleanup_user_struct);
++      put_user_ns(up->user_ns);
++      INIT_WORK(&up->work, remove_user_sysfs_dir);
+       schedule_work(&up->work);
+ }
+@@ -357,29 +357,12 @@
+       sched_destroy_user(up);
+       key_put(up->uid_keyring);
+       key_put(up->session_keyring);
++      put_user_ns(up->user_ns);
+       kmem_cache_free(uid_cachep, up);
+ }
+ #endif
+-#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED)
+-/*
+- * We need to check if a setuid can take place. This function should be called
+- * before successfully completing the setuid.
+- */
+-int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+-{
+-
+-      return sched_rt_can_attach(up->tg, tsk);
+-
+-}
+-#else
+-int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+-{
+-      return 1;
+-}
+-#endif
+-
+ /*
+  * Locate the user_struct for the passed UID.  If found, take a ref on it.  The
+  * caller must undo that ref with free_uid().
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/user_namespace.c linux-2.6.29-rc3.owrt/kernel/user_namespace.c
+--- linux-2.6.29.owrt/kernel/user_namespace.c  2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/user_namespace.c      2009-05-10 23:48:29.000000000 +0200
+@@ -60,25 +60,12 @@
+       return 0;
+ }
+-/*
+- * Deferred destructor for a user namespace.  This is required because
+- * free_user_ns() may be called with uidhash_lock held, but we need to call
+- * back to free_uid() which will want to take the lock again.
+- */
+-static void free_user_ns_work(struct work_struct *work)
+-{
+-      struct user_namespace *ns =
+-              container_of(work, struct user_namespace, destroyer);
+-      free_uid(ns->creator);
+-      kfree(ns);
+-}
+-
+ void free_user_ns(struct kref *kref)
+ {
+-      struct user_namespace *ns =
+-              container_of(kref, struct user_namespace, kref);
++      struct user_namespace *ns;
+-      INIT_WORK(&ns->destroyer, free_user_ns_work);
+-      schedule_work(&ns->destroyer);
++      ns = container_of(kref, struct user_namespace, kref);
++      free_uid(ns->creator);
++      kfree(ns);
+ }
+ EXPORT_SYMBOL(free_user_ns);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/kernel/wait.c linux-2.6.29-rc3.owrt/kernel/wait.c
+--- linux-2.6.29.owrt/kernel/wait.c    2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/kernel/wait.c        2009-05-10 23:48:29.000000000 +0200
+@@ -91,15 +91,6 @@
+ }
+ EXPORT_SYMBOL(prepare_to_wait_exclusive);
+-/*
+- * finish_wait - clean up after waiting in a queue
+- * @q: waitqueue waited on
+- * @wait: wait descriptor
+- *
+- * Sets current thread back to running state and removes
+- * the wait descriptor from the given waitqueue if still
+- * queued.
+- */
+ void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
+ {
+       unsigned long flags;
+@@ -126,39 +117,6 @@
+ }
+ EXPORT_SYMBOL(finish_wait);
+-/*
+- * abort_exclusive_wait - abort exclusive waiting in a queue
+- * @q: waitqueue waited on
+- * @wait: wait descriptor
+- * @state: runstate of the waiter to be woken
+- * @key: key to identify a wait bit queue or %NULL
+- *
+- * Sets current thread back to running state and removes
+- * the wait descriptor from the given waitqueue if still
+- * queued.
+- *
+- * Wakes up the next waiter if the caller is concurrently
+- * woken up through the queue.
+- *
+- * This prevents waiter starvation where an exclusive waiter
+- * aborts and is woken up concurrently and noone wakes up
+- * the next waiter.
+- */
+-void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
+-                      unsigned int mode, void *key)
+-{
+-      unsigned long flags;
+-
+-      __set_current_state(TASK_RUNNING);
+-      spin_lock_irqsave(&q->lock, flags);
+-      if (!list_empty(&wait->task_list))
+-              list_del_init(&wait->task_list);
+-      else if (waitqueue_active(q))
+-              __wake_up_common(q, mode, 1, 0, key);
+-      spin_unlock_irqrestore(&q->lock, flags);
+-}
+-EXPORT_SYMBOL(abort_exclusive_wait);
+-
+ int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key)
+ {
+       int ret = default_wake_function(wait, mode, sync, key);
+@@ -219,20 +177,17 @@
+ __wait_on_bit_lock(wait_queue_head_t *wq, struct wait_bit_queue *q,
+                       int (*action)(void *), unsigned mode)
+ {
+-      do {
+-              int ret;
++      int ret = 0;
++      do {
+               prepare_to_wait_exclusive(wq, &q->wait, mode);
+-              if (!test_bit(q->key.bit_nr, q->key.flags))
+-                      continue;
+-              ret = action(q->key.flags);
+-              if (!ret)
+-                      continue;
+-              abort_exclusive_wait(wq, &q->wait, mode, &q->key);
+-              return ret;
++              if (test_bit(q->key.bit_nr, q->key.flags)) {
++                      if ((ret = (*action)(q->key.flags)))
++                              break;
++              }
+       } while (test_and_set_bit(q->key.bit_nr, q->key.flags));
+       finish_wait(wq, &q->wait);
+-      return 0;
++      return ret;
+ }
+ EXPORT_SYMBOL(__wait_on_bit_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/lib/bitmap.c linux-2.6.29-rc3.owrt/lib/bitmap.c
+--- linux-2.6.29.owrt/lib/bitmap.c     2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/lib/bitmap.c 2009-05-10 23:48:29.000000000 +0200
+@@ -948,15 +948,15 @@
+  */
+ int bitmap_find_free_region(unsigned long *bitmap, int bits, int order)
+ {
+-      int pos, end;           /* scans bitmap by regions of size order */
++      int pos;                /* scans bitmap by regions of size order */
+-      for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) {
+-              if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
+-                      continue;
+-              __reg_op(bitmap, pos, order, REG_OP_ALLOC);
+-              return pos;
+-      }
+-      return -ENOMEM;
++      for (pos = 0; pos < bits; pos += (1 << order))
++              if (__reg_op(bitmap, pos, order, REG_OP_ISFREE))
++                      break;
++      if (pos == bits)
++              return -ENOMEM;
++      __reg_op(bitmap, pos, order, REG_OP_ALLOC);
++      return pos;
+ }
+ EXPORT_SYMBOL(bitmap_find_free_region);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/lib/idr.c linux-2.6.29-rc3.owrt/lib/idr.c
+--- linux-2.6.29.owrt/lib/idr.c        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/lib/idr.c    2009-05-10 23:48:29.000000000 +0200
+@@ -449,7 +449,6 @@
+       n = idp->layers * IDR_BITS;
+       p = idp->top;
+-      rcu_assign_pointer(idp->top, NULL);
+       max = 1 << n;
+       id = 0;
+@@ -468,6 +467,7 @@
+                       p = *--paa;
+               }
+       }
++      rcu_assign_pointer(idp->top, NULL);
+       idp->layers = 0;
+ }
+ EXPORT_SYMBOL(idr_remove_all);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/lib/Kconfig.debug linux-2.6.29-rc3.owrt/lib/Kconfig.debug
+--- linux-2.6.29.owrt/lib/Kconfig.debug        2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/lib/Kconfig.debug    2009-05-10 23:48:29.000000000 +0200
+@@ -838,7 +838,7 @@
+         If unsure, say N.
+-config BUILD_DOCSRC
++menuconfig BUILD_DOCSRC
+       bool "Build targets in Documentation/ tree"
+       depends on HEADERS_CHECK
+       help
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/lib/smp_processor_id.c linux-2.6.29-rc3.owrt/lib/smp_processor_id.c
+--- linux-2.6.29.owrt/lib/smp_processor_id.c   2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/lib/smp_processor_id.c       2009-05-10 23:48:29.000000000 +0200
+@@ -22,7 +22,7 @@
+        * Kernel threads bound to a single CPU can safely use
+        * smp_processor_id():
+        */
+-      if (cpumask_equal(&current->cpus_allowed, cpumask_of(this_cpu)))
++      if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu)))
+               goto out;
+       /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/.mailmap linux-2.6.29-rc3.owrt/.mailmap
+--- linux-2.6.29.owrt/.mailmap 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/.mailmap     2009-05-10 23:48:29.000000000 +0200
+@@ -92,7 +92,6 @@
+ Rui Saraiva <rmps@joel.ist.utl.pt>
+ Sachin P Sant <ssant@in.ibm.com>
+ Sam Ravnborg <sam@mars.ravnborg.org>
+-Sascha Hauer <s.hauer@pengutronix.de>
+ S.Çağlar Onur <caglar@pardus.org.tr>
+ Simon Kelley <simon@thekelleys.org.uk>
+ Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
+@@ -101,7 +100,6 @@
+ Thomas Graf <tgraf@suug.ch>
+ Tony Luck <tony.luck@intel.com>
+ Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+-Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+-Uwe Kleine-König <ukl@pengutronix.de>
+ Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
++Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/MAINTAINERS linux-2.6.29-rc3.owrt/MAINTAINERS
+--- linux-2.6.29.owrt/MAINTAINERS      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/MAINTAINERS  2009-05-10 23:48:33.000000000 +0200
+@@ -692,13 +692,6 @@
+ L:    linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+ S:    Maintained
+-ARM/NUVOTON W90X900 ARM ARCHITECTURE
+-P:      Wan ZongShun
+-M:      mcuos.com@gmail.com
+-L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+-W:      http://www.mcuos.com
+-S:      Maintained
+-
+ ARPD SUPPORT
+ P:    Jonathan Layes
+ L:    netdev@vger.kernel.org
+@@ -918,7 +911,7 @@
+ BLACKFIN ARCHITECTURE
+ P:    Bryan Wu
+ M:    cooloney@kernel.org
+-L:    uclinux-dist-devel@blackfin.uclinux.org
++L:    uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+ W:    http://blackfin.uclinux.org
+ S:    Supported
+@@ -1028,14 +1021,6 @@
+ W:    http://bu3sch.de/btgpio.php
+ S:    Maintained
+-BTRFS FILE SYSTEM
+-P:    Chris Mason
+-M:    chris.mason@oracle.com
+-L:    linux-btrfs@vger.kernel.org
+-W:    http://btrfs.wiki.kernel.org/
+-T:    git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+-S:    Maintained
+-
+ BTTV VIDEO4LINUX DRIVER
+ P:    Mauro Carvalho Chehab
+ M:    mchehab@infradead.org
+@@ -1209,8 +1194,6 @@
+ CONTROL GROUPS (CGROUPS)
+ P:    Paul Menage
+ M:    menage@google.com
+-P:    Li Zefan
+-M:    lizf@cn.fujitsu.com
+ L:    containers@lists.linux-foundation.org
+ S:    Maintained
+@@ -1469,6 +1452,8 @@
+ S:    Supported
+ DOCUMENTATION (/Documentation directory)
++P:    Michael Kerrisk
++M:    mtk.manpages@gmail.com
+ P:    Randy Dunlap
+ M:    rdunlap@xenotime.net
+ L:    linux-doc@vger.kernel.org
+@@ -1910,10 +1895,10 @@
+ S:    Maintained
+ HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
+-P:    Frank Seidel
+-M:    frank@f-seidel.de
+-L:    lm-sensors@lm-sensors.org
+-W:    http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
++P:    Robert Love
++M:    rlove@rlove.org
++M:    linux-kernel@vger.kernel.org
++W:    http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+ S:    Maintained
+ GSPCA FINEPIX SUBDRIVER
+@@ -2011,7 +1996,7 @@
+ HIBERNATION (aka Software Suspend, aka swsusp)
+ P:    Pavel Machek
+-M:    pavel@ucw.cz
++M:    pavel@suse.cz
+ P:    Rafael J. Wysocki
+ M:    rjw@sisk.pl
+ L:    linux-pm@lists.linux-foundation.org
+@@ -2232,7 +2217,7 @@
+ M:    sean.hefty@intel.com
+ P:    Hal Rosenstock
+ M:    hal.rosenstock@gmail.com
+-L:    general@lists.openfabrics.org (moderated for non-subscribers)
++L:    general@lists.openfabrics.org
+ W:    http://www.openib.org/
+ T:    git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+ S:    Supported
+@@ -2467,7 +2452,7 @@
+ ISDN SUBSYSTEM
+ P:    Karsten Keil
+-M:    isdn@linux-pingi.de
++M:    kkeil@suse.de
+ L:    isdn4linux@listserv.isdn4linux.de (subscribers-only)
+ W:    http://www.isdn4linux.de
+ T:    git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
+@@ -2856,6 +2841,8 @@
+ MAC80211
+ P:    Johannes Berg
+ M:    johannes@sipsolutions.net
++P:    Michael Wu
++M:    flamingice@sourmilk.net
+ L:    linux-wireless@vger.kernel.org
+ W:    http://linuxwireless.org/
+ T:    git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
+@@ -2882,7 +2869,7 @@
+ M:    mtk.manpages@gmail.com
+ W:    http://www.kernel.org/doc/man-pages
+ L:    linux-man@vger.kernel.org
+-S:    Maintained
++S:    Supported
+ MARVELL LIBERTAS WIRELESS DRIVER
+ P:    Dan Williams
+@@ -3337,8 +3324,8 @@
+ M:    jeremy@xensource.com
+ P:    Chris Wright
+ M:    chrisw@sous-sol.org
+-P:    Alok Kataria
+-M:    akataria@vmware.com
++P:    Zachary Amsden
++M:    zach@vmware.com
+ P:    Rusty Russell
+ M:    rusty@rustcorp.com.au
+ L:    virtualization@lists.osdl.org
+@@ -3355,8 +3342,10 @@
+ PARISC ARCHITECTURE
+ P:    Kyle McMartin
+ M:    kyle@mcmartin.ca
+-P:    Helge Deller
+-M:    deller@gmx.de
++P:    Matthew Wilcox
++M:    matthew@wil.cx
++P:    Grant Grundler
++M:    grundler@parisc-linux.org
+ L:    linux-parisc@vger.kernel.org
+ W:    http://www.parisc-linux.org/
+ T:    git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
+@@ -3547,12 +3536,6 @@
+ PXA MMCI DRIVER
+ S:    Orphan
+-PXA RTC DRIVER
+-P:    Robert Jarzmik
+-M:    robert.jarzmik@free.fr
+-L:    rtc-linux@googlegroups.com
+-S:    Maintained
+-
+ QLOGIC QLA2XXX FC-SCSI DRIVER
+ P:    Andrew Vasquez
+ M:    linux-driver@qlogic.com
+@@ -3881,15 +3864,6 @@
+ T:    git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+ S:    Supported
+-SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+-P:    Sathya Perla
+-M:    sathyap@serverengines.com
+-P:      Subbu Seetharaman
+-M:      subbus@serverengines.com
+-L:      netdev@vger.kernel.org
+-W:      http://www.serverengines.com
+-S:      Supported
+-
+ SFC NETWORK DRIVER
+ P:    Steve Hodgson
+ P:    Ben Hutchings
+@@ -4189,7 +4163,7 @@
+ P:    Len Brown
+ M:    len.brown@intel.com
+ P:    Pavel Machek
+-M:    pavel@ucw.cz
++M:    pavel@suse.cz
+ P:    Rafael J. Wysocki
+ M:    rjw@sisk.pl
+ L:    linux-pm@lists.linux-foundation.org
+@@ -4310,8 +4284,8 @@
+ M:    srajiv@linux.vnet.ibm.com
+ W:    http://tpmdd.sourceforge.net
+ P:    Marcel Selhorst
+-M:    m.selhorst@sirrix.com
+-W:    http://www.sirrix.com
++M:    tpm@selhorst.net
++W:    http://www.prosec.rub.de/tpm/
+ L:    tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
+ S:    Maintained
+@@ -4874,7 +4848,6 @@
+ M:    mingo@redhat.com
+ P:    H. Peter Anvin
+ M:    hpa@zytor.com
+-M:    x86@kernel.org
+ L:    linux-kernel@vger.kernel.org
+ T:    git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+ S:    Maintained
+@@ -4941,11 +4914,11 @@
+ S:    Maintained
+ ZR36067 VIDEO FOR LINUX DRIVER
++P:    Ronald Bultje
++M:    rbultje@ronald.bitfreak.net
+ L:    mjpeg-users@lists.sourceforge.net
+-L:    linux-media@vger.kernel.org
+ W:    http://mjpeg.sourceforge.net/driver-zoran/
+-T:    Mercurial http://linuxtv.org/hg/v4l-dvb
+-S:    Odd Fixes
++S:    Maintained
+ ZS DECSTATION Z85C30 SERIAL DRIVER
+ P:    Maciej W. Rozycki
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/Makefile linux-2.6.29-rc3.owrt/Makefile
+--- linux-2.6.29.owrt/Makefile 2009-05-10 22:04:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt/Makefile     2009-05-10 23:48:33.000000000 +0200
+@@ -2,7 +2,7 @@
+ PATCHLEVEL = 6
+ SUBLEVEL = 29
+ EXTRAVERSION =
+-NAME = Temporary Tasmanian Devil
++NAME = Erotic Pickled Herring
+ # *DOCUMENTATION*
+ # To see a list of typical targets execute "make help"
+@@ -389,7 +389,6 @@
+ # output directory.
+ outputmakefile:
+ ifneq ($(KBUILD_SRC),)
+-      $(Q)ln -fsn $(srctree) source
+       $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+           $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+ endif
+@@ -569,12 +568,6 @@
+ # disable pointer signed / unsigned warnings in gcc 4.0
+ KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+-# disable invalid "can't wrap" optimzations for signed / pointers
+-KBUILD_CFLAGS += $(call cc-option,-fwrapv)
+-
+-# revert to pre-gcc-4.4 behaviour of .eh_frame
+-KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+-
+ # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+ # But warn user when we do so
+ warn-assign = \
+@@ -913,18 +906,12 @@
+ # and if the SCM is know a tag from the SCM is appended.
+ # The appended tag is determined by the SCM used.
+ #
+-# .scmversion is used when generating rpm packages so we do not loose
+-# the version information from the SCM when we do the build of the kernel
+-# from the copied source
++# Currently, only git is supported.
++# Other SCMs can edit scripts/setlocalversion and add the appropriate
++# checks as needed.
+ ifdef CONFIG_LOCALVERSION_AUTO
+-
+-ifeq ($(wildcard .scmversion),)
+-        _localver-auto = $(shell $(CONFIG_SHELL) \
+-                         $(srctree)/scripts/setlocalversion $(srctree))
+-else
+-        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+-endif
+-
++      _localver-auto = $(shell $(CONFIG_SHELL) \
++                        $(srctree)/scripts/setlocalversion $(srctree))
+       localver-auto  = $(LOCALVERSION)$(_localver-auto)
+ endif
+@@ -962,6 +949,7 @@
+           mkdir -p include2;                                          \
+           ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
+       fi
++      ln -fsn $(srctree) source
+ endif
+ # prepare2 creates a makefile if using a separate output directory
+@@ -1552,7 +1540,7 @@
+       cmd_depmod = \
+       if [ -r System.map -a -x $(DEPMOD) ]; then                              \
+               $(DEPMOD) -ae -F System.map                                     \
+-              $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
++              $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+               $(KERNELRELEASE);                                               \
+       fi
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/fremap.c linux-2.6.29-rc3.owrt/mm/fremap.c
+--- linux-2.6.29.owrt/mm/fremap.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/fremap.c  2009-05-10 23:48:33.000000000 +0200
+@@ -198,7 +198,7 @@
+                       flags &= MAP_NONBLOCK;
+                       get_file(file);
+                       addr = mmap_region(file, start, size,
+-                                      flags, vma->vm_flags, pgoff);
++                                      flags, vma->vm_flags, pgoff, 1);
+                       fput(file);
+                       if (IS_ERR_VALUE(addr)) {
+                               err = addr;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/hugetlb.c linux-2.6.29-rc3.owrt/mm/hugetlb.c
+--- linux-2.6.29.owrt/mm/hugetlb.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/hugetlb.c 2009-05-10 23:48:33.000000000 +0200
+@@ -2269,18 +2269,12 @@
+ int hugetlb_reserve_pages(struct inode *inode,
+                                       long from, long to,
+-                                      struct vm_area_struct *vma,
+-                                      int acctflag)
++                                      struct vm_area_struct *vma)
+ {
+       long ret, chg;
+       struct hstate *h = hstate_inode(inode);
+-      /*
+-       * Only apply hugepage reservation if asked. At fault time, an
+-       * attempt will be made for VM_NORESERVE to allocate a page
+-       * and filesystem quota without using reserves
+-       */
+-      if (acctflag & VM_NORESERVE)
++      if (vma && vma->vm_flags & VM_NORESERVE)
+               return 0;
+       /*
+@@ -2305,31 +2299,13 @@
+       if (chg < 0)
+               return chg;
+-      /* There must be enough filesystem quota for the mapping */
+       if (hugetlb_get_quota(inode->i_mapping, chg))
+               return -ENOSPC;
+-
+-      /*
+-       * Check enough hugepages are available for the reservation.
+-       * Hand back the quota if there are not
+-       */
+       ret = hugetlb_acct_memory(h, chg);
+       if (ret < 0) {
+               hugetlb_put_quota(inode->i_mapping, chg);
+               return ret;
+       }
+-
+-      /*
+-       * Account for the reservations made. Shared mappings record regions
+-       * that have reservations as they are shared by multiple VMAs.
+-       * When the last VMA disappears, the region map says how much
+-       * the reservation was and the page cache tells how much of
+-       * the reservation was consumed. Private mappings are per-VMA and
+-       * only the consumed reservations are tracked. When the VMA
+-       * disappears, the original reservation is the VMA size and the
+-       * consumed reservations are stored in the map. Hence, nothing
+-       * else has to be done for private mappings here
+-       */
+       if (!vma || vma->vm_flags & VM_SHARED)
+               region_add(&inode->i_mapping->private_list, from, to);
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/memcontrol.c linux-2.6.29-rc3.owrt/mm/memcontrol.c
+--- linux-2.6.29.owrt/mm/memcontrol.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/memcontrol.c      2009-05-10 23:48:33.000000000 +0200
+@@ -202,7 +202,6 @@
+ static void mem_cgroup_get(struct mem_cgroup *mem);
+ static void mem_cgroup_put(struct mem_cgroup *mem);
+-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
+ static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
+                                        struct page_cgroup *pc,
+@@ -1685,7 +1684,7 @@
+               /* This is for making all *used* pages to be on LRU. */
+               lru_add_drain_all();
+               ret = 0;
+-              for_each_node_state(node, N_HIGH_MEMORY) {
++              for_each_node_state(node, N_POSSIBLE) {
+                       for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) {
+                               enum lru_list l;
+                               for_each_lru(l) {
+@@ -2194,23 +2193,10 @@
+ static void mem_cgroup_put(struct mem_cgroup *mem)
+ {
+-      if (atomic_dec_and_test(&mem->refcnt)) {
+-              struct mem_cgroup *parent = parent_mem_cgroup(mem);
++      if (atomic_dec_and_test(&mem->refcnt))
+               __mem_cgroup_free(mem);
+-              if (parent)
+-                      mem_cgroup_put(parent);
+-      }
+ }
+-/*
+- * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
+- */
+-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem)
+-{
+-      if (!mem->res.parent)
+-              return NULL;
+-      return mem_cgroup_from_res_counter(mem->res.parent, res);
+-}
+ #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+ static void __init enable_swap_cgroup(void)
+@@ -2249,13 +2235,6 @@
+       if (parent && parent->use_hierarchy) {
+               res_counter_init(&mem->res, &parent->res);
+               res_counter_init(&mem->memsw, &parent->memsw);
+-              /*
+-               * We increment refcnt of the parent to ensure that we can
+-               * safely access it on res_counter_charge/uncharge.
+-               * This refcnt will be decremented when freeing this
+-               * mem_cgroup(see mem_cgroup_put).
+-               */
+-              mem_cgroup_get(parent);
+       } else {
+               res_counter_init(&mem->res, NULL);
+               res_counter_init(&mem->memsw, NULL);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/memory.c linux-2.6.29-rc3.owrt/mm/memory.c
+--- linux-2.6.29.owrt/mm/memory.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/memory.c  2009-05-10 23:48:33.000000000 +0200
+@@ -2000,7 +2000,7 @@
+        * Don't let another task, with possibly unlocked vma,
+        * keep the mlocked page.
+        */
+-      if ((vma->vm_flags & VM_LOCKED) && old_page) {
++      if (vma->vm_flags & VM_LOCKED) {
+               lock_page(old_page);    /* for LRU manipulation */
+               clear_page_mlock(old_page);
+               unlock_page(old_page);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/migrate.c linux-2.6.29-rc3.owrt/mm/migrate.c
+--- linux-2.6.29.owrt/mm/migrate.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/migrate.c 2009-05-10 23:48:33.000000000 +0200
+@@ -1129,7 +1129,7 @@
+       struct vm_area_struct *vma;
+       int err = 0;
+-      for (vma = mm->mmap; vma && !err; vma = vma->vm_next) {
++      for(vma = mm->mmap; vma->vm_next && !err; vma = vma->vm_next) {
+               if (vma->vm_ops && vma->vm_ops->migrate) {
+                       err = vma->vm_ops->migrate(vma, to, from, flags);
+                       if (err)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/mlock.c linux-2.6.29-rc3.owrt/mm/mlock.c
+--- linux-2.6.29.owrt/mm/mlock.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/mlock.c   2009-05-10 23:48:33.000000000 +0200
+@@ -294,10 +294,14 @@
+  *
+  * return number of pages [> 0] to be removed from locked_vm on success
+  * of "special" vmas.
++ *
++ * return negative error if vma spanning @start-@range disappears while
++ * mmap semaphore is dropped.  Unlikely?
+  */
+ long mlock_vma_pages_range(struct vm_area_struct *vma,
+                       unsigned long start, unsigned long end)
+ {
++      struct mm_struct *mm = vma->vm_mm;
+       int nr_pages = (end - start) / PAGE_SIZE;
+       BUG_ON(!(vma->vm_flags & VM_LOCKED));
+@@ -310,11 +314,20 @@
+       if (!((vma->vm_flags & (VM_DONTEXPAND | VM_RESERVED)) ||
+                       is_vm_hugetlb_page(vma) ||
+                       vma == get_gate_vma(current))) {
++              long error;
++              downgrade_write(&mm->mmap_sem);
+-              __mlock_vma_pages_range(vma, start, end, 1);
++              error = __mlock_vma_pages_range(vma, start, end, 1);
+-              /* Hide errors from mmap() and other callers */
+-              return 0;
++              up_read(&mm->mmap_sem);
++              /* vma can change or disappear */
++              down_write(&mm->mmap_sem);
++              vma = find_vma(mm, start);
++              /* non-NULL vma must contain @start, but need to check @end */
++              if (!vma ||  end > vma->vm_end)
++                      return -ENOMEM;
++
++              return 0;       /* hide other errors from mmap(), et al */
+       }
+       /*
+@@ -425,14 +438,41 @@
+       vma->vm_flags = newflags;
+       if (lock) {
++              /*
++               * mmap_sem is currently held for write.  Downgrade the write
++               * lock to a read lock so that other faults, mmap scans, ...
++               * while we fault in all pages.
++               */
++              downgrade_write(&mm->mmap_sem);
++
+               ret = __mlock_vma_pages_range(vma, start, end, 1);
+-              if (ret > 0) {
++              /*
++               * Need to reacquire mmap sem in write mode, as our callers
++               * expect this.  We have no support for atomically upgrading
++               * a sem to write, so we need to check for ranges while sem
++               * is unlocked.
++               */
++              up_read(&mm->mmap_sem);
++              /* vma can change or disappear */
++              down_write(&mm->mmap_sem);
++              *prev = find_vma(mm, start);
++              /* non-NULL *prev must contain @start, but need to check @end */
++              if (!(*prev) || end > (*prev)->vm_end)
++                      ret = -ENOMEM;
++              else if (ret > 0) {
+                       mm->locked_vm -= ret;
+                       ret = 0;
+               } else
+                       ret = __mlock_posix_error_return(ret); /* translate if needed */
+       } else {
++              /*
++               * TODO:  for unlocking, pages will already be resident, so
++               * we don't need to wait for allocations/reclaim/pagein, ...
++               * However, unlocking a very large region can still take a
++               * while.  Should we downgrade the semaphore for both lock
++               * AND unlock ?
++               */
+               __mlock_vma_pages_range(vma, start, end, 0);
+       }
+@@ -660,7 +700,7 @@
+       return buffer;
+ }
+-void release_locked_buffer(void *buffer, size_t size)
++void free_locked_buffer(void *buffer, size_t size)
+ {
+       unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
+@@ -670,11 +710,6 @@
+       current->mm->locked_vm -= pgsz;
+       up_write(&current->mm->mmap_sem);
+-}
+-
+-void free_locked_buffer(void *buffer, size_t size)
+-{
+-      release_locked_buffer(buffer, size);
+       kfree(buffer);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/mmap.c linux-2.6.29-rc3.owrt/mm/mmap.c
+--- linux-2.6.29.owrt/mm/mmap.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/mmap.c    2009-05-10 23:48:33.000000000 +0200
+@@ -658,9 +658,6 @@
+       validate_mm(mm);
+ }
+-/* Flags that can be inherited from an existing mapping when merging */
+-#define VM_MERGEABLE_FLAGS (VM_CAN_NONLINEAR)
+-
+ /*
+  * If the vma has a ->close operation then the driver probably needs to release
+  * per-vma resources, so we don't attempt to merge those.
+@@ -668,7 +665,7 @@
+ static inline int is_mergeable_vma(struct vm_area_struct *vma,
+                       struct file *file, unsigned long vm_flags)
+ {
+-      if ((vma->vm_flags ^ vm_flags) & ~VM_MERGEABLE_FLAGS)
++      if (vma->vm_flags != vm_flags)
+               return 0;
+       if (vma->vm_file != file)
+               return 0;
+@@ -918,6 +915,7 @@
+       struct inode *inode;
+       unsigned int vm_flags;
+       int error;
++      int accountable = 1;
+       unsigned long reqprot = prot;
+       /*
+@@ -1018,6 +1016,8 @@
+                                       return -EPERM;
+                               vm_flags &= ~VM_MAYEXEC;
+                       }
++                      if (is_file_hugepages(file))
++                              accountable = 0;
+                       if (!file->f_op || !file->f_op->mmap)
+                               return -ENODEV;
+@@ -1050,7 +1050,8 @@
+       if (error)
+               return error;
+-      return mmap_region(file, addr, len, flags, vm_flags, pgoff);
++      return mmap_region(file, addr, len, flags, vm_flags, pgoff,
++                         accountable);
+ }
+ EXPORT_SYMBOL(do_mmap_pgoff);
+@@ -1086,25 +1087,10 @@
+               mapping_cap_account_dirty(vma->vm_file->f_mapping);
+ }
+-/*
+- * We account for memory if it's a private writeable mapping,
+- * not hugepages and VM_NORESERVE wasn't set.
+- */
+-static inline int accountable_mapping(struct file *file, unsigned int vm_flags)
+-{
+-      /*
+-       * hugetlb has its own accounting separate from the core VM
+-       * VM_HUGETLB may not be set yet so we cannot check for that flag.
+-       */
+-      if (file && is_file_hugepages(file))
+-              return 0;
+-
+-      return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE;
+-}
+-
+ unsigned long mmap_region(struct file *file, unsigned long addr,
+                         unsigned long len, unsigned long flags,
+-                        unsigned int vm_flags, unsigned long pgoff)
++                        unsigned int vm_flags, unsigned long pgoff,
++                        int accountable)
+ {
+       struct mm_struct *mm = current->mm;
+       struct vm_area_struct *vma, *prev;
+@@ -1128,38 +1114,38 @@
+       if (!may_expand_vm(mm, len >> PAGE_SHIFT))
+               return -ENOMEM;
+-      /*
+-       * Set 'VM_NORESERVE' if we should not account for the
+-       * memory use of this mapping.
+-       */
+-      if ((flags & MAP_NORESERVE)) {
+-              /* We honor MAP_NORESERVE if allowed to overcommit */
+-              if (sysctl_overcommit_memory != OVERCOMMIT_NEVER)
+-                      vm_flags |= VM_NORESERVE;
++      if (flags & MAP_NORESERVE)
++              vm_flags |= VM_NORESERVE;
+-              /* hugetlb applies strict overcommit unless MAP_NORESERVE */
+-              if (file && is_file_hugepages(file))
+-                      vm_flags |= VM_NORESERVE;
++      if (accountable && (!(flags & MAP_NORESERVE) ||
++                          sysctl_overcommit_memory == OVERCOMMIT_NEVER)) {
++              if (vm_flags & VM_SHARED) {
++                      /* Check memory availability in shmem_file_setup? */
++                      vm_flags |= VM_ACCOUNT;
++              } else if (vm_flags & VM_WRITE) {
++                      /*
++                       * Private writable mapping: check memory availability
++                       */
++                      charged = len >> PAGE_SHIFT;
++                      if (security_vm_enough_memory(charged))
++                              return -ENOMEM;
++                      vm_flags |= VM_ACCOUNT;
++              }
+       }
+       /*
+-       * Private writable mapping: check memory availability
++       * Can we just expand an old private anonymous mapping?
++       * The VM_SHARED test is necessary because shmem_zero_setup
++       * will create the file object for a shared anonymous map below.
+        */
+-      if (accountable_mapping(file, vm_flags)) {
+-              charged = len >> PAGE_SHIFT;
+-              if (security_vm_enough_memory(charged))
+-                      return -ENOMEM;
+-              vm_flags |= VM_ACCOUNT;
++      if (!file && !(vm_flags & VM_SHARED)) {
++              vma = vma_merge(mm, prev, addr, addr + len, vm_flags,
++                                      NULL, NULL, pgoff, NULL);
++              if (vma)
++                      goto out;
+       }
+       /*
+-       * Can we just expand an old mapping?
+-       */
+-      vma = vma_merge(mm, prev, addr, addr + len, vm_flags, NULL, file, pgoff, NULL);
+-      if (vma)
+-              goto out;
+-
+-      /*
+        * Determine the object being mapped and call the appropriate
+        * specific mapper. the address has already been validated, but
+        * not unmapped, but the maps are removed from the list.
+@@ -1200,6 +1186,14 @@
+                       goto free_vma;
+       }
++      /* We set VM_ACCOUNT in a shared mapping's vm_flags, to inform
++       * shmem_zero_setup (perhaps called through /dev/zero's ->mmap)
++       * that memory reservation must be checked; but that reservation
++       * belongs to shared memory object, not to vma: so now clear it.
++       */
++      if ((vm_flags & (VM_SHARED|VM_ACCOUNT)) == (VM_SHARED|VM_ACCOUNT))
++              vma->vm_flags &= ~VM_ACCOUNT;
++
+       /* Can addr have changed??
+        *
+        * Answer: Yes, several device drivers can do it in their
+@@ -1212,8 +1206,17 @@
+       if (vma_wants_writenotify(vma))
+               vma->vm_page_prot = vm_get_page_prot(vm_flags & ~VM_SHARED);
+-      vma_link(mm, vma, prev, rb_link, rb_parent);
+-      file = vma->vm_file;
++      if (file && vma_merge(mm, prev, addr, vma->vm_end,
++                      vma->vm_flags, NULL, file, pgoff, vma_policy(vma))) {
++              mpol_put(vma_policy(vma));
++              kmem_cache_free(vm_area_cachep, vma);
++              fput(file);
++              if (vm_flags & VM_EXECUTABLE)
++                      removed_exe_file_vma(mm);
++      } else {
++              vma_link(mm, vma, prev, rb_link, rb_parent);
++              file = vma->vm_file;
++      }
+       /* Once vma denies write, undo our temporary denial count */
+       if (correct_wcount)
+@@ -2084,8 +2087,12 @@
+       unsigned long end;
+       /* mm's last user has gone, and its about to be pulled down */
++      arch_exit_mmap(mm);
+       mmu_notifier_release(mm);
++      if (!mm->mmap)  /* Can happen if dup_mmap() received an OOM */
++              return;
++
+       if (mm->locked_vm) {
+               vma = mm->mmap;
+               while (vma) {
+@@ -2094,13 +2101,7 @@
+                       vma = vma->vm_next;
+               }
+       }
+-
+-      arch_exit_mmap(mm);
+-
+       vma = mm->mmap;
+-      if (!vma)       /* Can happen if dup_mmap() received an OOM */
+-              return;
+-
+       lru_add_drain();
+       flush_cache_mm(mm);
+       tlb = tlb_gather_mmu(mm, 1);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/mprotect.c linux-2.6.29-rc3.owrt/mm/mprotect.c
+--- linux-2.6.29.owrt/mm/mprotect.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/mprotect.c        2009-05-10 23:48:33.000000000 +0200
+@@ -151,11 +151,10 @@
+       /*
+        * If we make a private mapping writable we increase our commit;
+        * but (without finer accounting) cannot reduce our commit if we
+-       * make it unwritable again. hugetlb mapping were accounted for
+-       * even if read-only so there is no need to account for them here
++       * make it unwritable again.
+        */
+       if (newflags & VM_WRITE) {
+-              if (!(oldflags & (VM_ACCOUNT|VM_WRITE|VM_HUGETLB|
++              if (!(oldflags & (VM_ACCOUNT|VM_WRITE|
+                                               VM_SHARED|VM_NORESERVE))) {
+                       charged = nrpages;
+                       if (security_vm_enough_memory(charged))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/page_alloc.c linux-2.6.29-rc3.owrt/mm/page_alloc.c
+--- linux-2.6.29.owrt/mm/page_alloc.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/page_alloc.c      2009-05-10 23:48:33.000000000 +0200
+@@ -2989,7 +2989,7 @@
+  * was used and there are no special requirements, this is a convenient
+  * alternative
+  */
+-int __meminit __early_pfn_to_nid(unsigned long pfn)
++int __meminit early_pfn_to_nid(unsigned long pfn)
+ {
+       int i;
+@@ -3000,33 +3000,10 @@
+               if (start_pfn <= pfn && pfn < end_pfn)
+                       return early_node_map[i].nid;
+       }
+-      /* This is a memory hole */
+-      return -1;
+-}
+-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+-
+-int __meminit early_pfn_to_nid(unsigned long pfn)
+-{
+-      int nid;
+-      nid = __early_pfn_to_nid(pfn);
+-      if (nid >= 0)
+-              return nid;
+-      /* just returns 0 */
+       return 0;
+ }
+-
+-#ifdef CONFIG_NODES_SPAN_OTHER_NODES
+-bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
+-{
+-      int nid;
+-
+-      nid = __early_pfn_to_nid(pfn);
+-      if (nid >= 0 && nid != node)
+-              return false;
+-      return true;
+-}
+-#endif
++#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+ /* Basic iterator support to walk early_node_map[] */
+ #define for_each_active_range_index_in_nid(i, nid) \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/page_cgroup.c linux-2.6.29-rc3.owrt/mm/page_cgroup.c
+--- linux-2.6.29.owrt/mm/page_cgroup.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/page_cgroup.c     2009-05-10 23:48:33.000000000 +0200
+@@ -114,8 +114,7 @@
+               nid = page_to_nid(pfn_to_page(pfn));
+               table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+               if (slab_is_available()) {
+-                      base = kmalloc_node(table_size,
+-                                      GFP_KERNEL | __GFP_NOWARN, nid);
++                      base = kmalloc_node(table_size, GFP_KERNEL, nid);
+                       if (!base)
+                               base = vmalloc_node(table_size, nid);
+               } else {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/page_io.c linux-2.6.29-rc3.owrt/mm/page_io.c
+--- linux-2.6.29.owrt/mm/page_io.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/page_io.c 2009-05-10 23:48:33.000000000 +0200
+@@ -111,7 +111,7 @@
+               goto out;
+       }
+       if (wbc->sync_mode == WB_SYNC_ALL)
+-              rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
++              rw |= (1 << BIO_RW_SYNC);
+       count_vm_event(PSWPOUT);
+       set_page_writeback(page);
+       unlock_page(page);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/page-writeback.c linux-2.6.29-rc3.owrt/mm/page-writeback.c
+--- linux-2.6.29.owrt/mm/page-writeback.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/page-writeback.c  2009-05-10 23:48:33.000000000 +0200
+@@ -209,7 +209,7 @@
+               struct file *filp, void __user *buffer, size_t *lenp,
+               loff_t *ppos)
+ {
+-      unsigned long old_bytes = vm_dirty_bytes;
++      int old_bytes = vm_dirty_bytes;
+       int ret;
+       ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+@@ -240,7 +240,7 @@
+ }
+ EXPORT_SYMBOL_GPL(bdi_writeout_inc);
+-void task_dirty_inc(struct task_struct *tsk)
++static inline void task_dirty_inc(struct task_struct *tsk)
+ {
+       prop_inc_single(&vm_dirties, &tsk->dirties);
+ }
+@@ -1051,25 +1051,13 @@
+                               }
+                       }
+-                      if (nr_to_write > 0) {
+-                              nr_to_write--;
+-                              if (nr_to_write == 0 &&
+-                                  wbc->sync_mode == WB_SYNC_NONE) {
+-                                      /*
+-                                       * We stop writing back only if we are
+-                                       * not doing integrity sync. In case of
+-                                       * integrity sync we have to keep going
+-                                       * because someone may be concurrently
+-                                       * dirtying pages, and we might have
+-                                       * synced a lot of newly appeared dirty
+-                                       * pages, but have not synced all of the
+-                                       * old dirty pages.
+-                                       */
++                      if (wbc->sync_mode == WB_SYNC_NONE) {
++                              wbc->nr_to_write--;
++                              if (wbc->nr_to_write <= 0) {
+                                       done = 1;
+                                       break;
+                               }
+                       }
+-
+                       if (wbc->nonblocking && bdi_write_congested(bdi)) {
+                               wbc->encountered_congestion = 1;
+                               done = 1;
+@@ -1079,7 +1067,7 @@
+               pagevec_release(&pvec);
+               cond_resched();
+       }
+-      if (!cycled && !done) {
++      if (!cycled) {
+               /*
+                * range_cyclic:
+                * We hit the last page and there is more work to be done: wrap
+@@ -1230,7 +1218,6 @@
+                               __inc_zone_page_state(page, NR_FILE_DIRTY);
+                               __inc_bdi_stat(mapping->backing_dev_info,
+                                               BDI_RECLAIMABLE);
+-                              task_dirty_inc(current);
+                               task_io_account_write(PAGE_CACHE_SIZE);
+                       }
+                       radix_tree_tag_set(&mapping->page_tree,
+@@ -1263,7 +1250,7 @@
+  * If the mapping doesn't provide a set_page_dirty a_op, then
+  * just fall through and assume that it wants buffer_heads.
+  */
+-int set_page_dirty(struct page *page)
++static int __set_page_dirty(struct page *page)
+ {
+       struct address_space *mapping = page_mapping(page);
+@@ -1281,6 +1268,14 @@
+       }
+       return 0;
+ }
++
++int set_page_dirty(struct page *page)
++{
++      int ret = __set_page_dirty(page);
++      if (ret)
++              task_dirty_inc(current);
++      return ret;
++}
+ EXPORT_SYMBOL(set_page_dirty);
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/rmap.c linux-2.6.29-rc3.owrt/mm/rmap.c
+--- linux-2.6.29.owrt/mm/rmap.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/rmap.c    2009-05-10 23:48:33.000000000 +0200
+@@ -1072,8 +1072,7 @@
+       spin_lock(&mapping->i_mmap_lock);
+       vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
+               if (MLOCK_PAGES && unlikely(unlock)) {
+-                      if (!((vma->vm_flags & VM_LOCKED) &&
+-                                              page_mapped_in_vma(page, vma)))
++                      if (!(vma->vm_flags & VM_LOCKED))
+                               continue;       /* must visit all vmas */
+                       ret = SWAP_MLOCK;
+               } else {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/shmem.c linux-2.6.29-rc3.owrt/mm/shmem.c
+--- linux-2.6.29.owrt/mm/shmem.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/shmem.c   2009-05-10 23:48:33.000000000 +0200
+@@ -169,13 +169,13 @@
+  */
+ static inline int shmem_acct_size(unsigned long flags, loff_t size)
+ {
+-      return (flags & VM_NORESERVE) ?
+-              0 : security_vm_enough_memory_kern(VM_ACCT(size));
++      return (flags & VM_ACCOUNT) ?
++              security_vm_enough_memory_kern(VM_ACCT(size)) : 0;
+ }
+ static inline void shmem_unacct_size(unsigned long flags, loff_t size)
+ {
+-      if (!(flags & VM_NORESERVE))
++      if (flags & VM_ACCOUNT)
+               vm_unacct_memory(VM_ACCT(size));
+ }
+@@ -187,13 +187,13 @@
+  */
+ static inline int shmem_acct_block(unsigned long flags)
+ {
+-      return (flags & VM_NORESERVE) ?
+-              security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)) : 0;
++      return (flags & VM_ACCOUNT) ?
++              0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE));
+ }
+ static inline void shmem_unacct_blocks(unsigned long flags, long pages)
+ {
+-      if (flags & VM_NORESERVE)
++      if (!(flags & VM_ACCOUNT))
+               vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
+ }
+@@ -1515,8 +1515,8 @@
+       return 0;
+ }
+-static struct inode *shmem_get_inode(struct super_block *sb, int mode,
+-                                      dev_t dev, unsigned long flags)
++static struct inode *
++shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
+ {
+       struct inode *inode;
+       struct shmem_inode_info *info;
+@@ -1537,7 +1537,6 @@
+               info = SHMEM_I(inode);
+               memset(info, 0, (char *)inode - (char *)info);
+               spin_lock_init(&info->lock);
+-              info->flags = flags & VM_NORESERVE;
+               INIT_LIST_HEAD(&info->swaplist);
+               switch (mode & S_IFMT) {
+@@ -1780,10 +1779,9 @@
+ static int
+ shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
+ {
+-      struct inode *inode;
++      struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev);
+       int error = -ENOSPC;
+-      inode = shmem_get_inode(dir->i_sb, mode, dev, VM_NORESERVE);
+       if (inode) {
+               error = security_inode_init_security(inode, dir, NULL, NULL,
+                                                    NULL);
+@@ -1922,7 +1920,7 @@
+       if (len > PAGE_CACHE_SIZE)
+               return -ENAMETOOLONG;
+-      inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0, VM_NORESERVE);
++      inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0);
+       if (!inode)
+               return -ENOSPC;
+@@ -2334,7 +2332,7 @@
+       sb->s_flags |= MS_POSIXACL;
+ #endif
+-      inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE);
++      inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
+       if (!inode)
+               goto failed;
+       inode->i_uid = sbinfo->uid;
+@@ -2576,12 +2574,12 @@
+       return 0;
+ }
+-#define shmem_vm_ops                          generic_file_vm_ops
+-#define shmem_file_operations                 ramfs_file_operations
+-#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
+-#define shmem_acct_size(flags, size)          0
+-#define shmem_unacct_size(flags, size)                do {} while (0)
+-#define SHMEM_MAX_BYTES                               LLONG_MAX
++#define shmem_file_operations ramfs_file_operations
++#define shmem_vm_ops generic_file_vm_ops
++#define shmem_get_inode ramfs_get_inode
++#define shmem_acct_size(a, b) 0
++#define shmem_unacct_size(a, b) do {} while (0)
++#define SHMEM_MAX_BYTES LLONG_MAX
+ #endif /* CONFIG_SHMEM */
+@@ -2600,7 +2598,7 @@
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+  * @size: size to be set for the file
+- * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
++ * @flags: vm_flags
+  */
+ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
+ {
+@@ -2634,10 +2632,13 @@
+               goto put_dentry;
+       error = -ENOSPC;
+-      inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags);
++      inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+       if (!inode)
+               goto close_file;
++#ifdef CONFIG_SHMEM
++      SHMEM_I(inode)->flags = flags & VM_ACCOUNT;
++#endif
+       d_instantiate(dentry, inode);
+       inode->i_size = size;
+       inode->i_nlink = 0;     /* It is unlinked */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/slab.c linux-2.6.29-rc3.owrt/mm/slab.c
+--- linux-2.6.29.owrt/mm/slab.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/slab.c    2009-05-10 23:48:33.000000000 +0200
+@@ -4457,4 +4457,3 @@
+       return obj_size(virt_to_cache(objp));
+ }
+-EXPORT_SYMBOL(ksize);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/slob.c linux-2.6.29-rc3.owrt/mm/slob.c
+--- linux-2.6.29.owrt/mm/slob.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/slob.c    2009-05-10 23:48:33.000000000 +0200
+@@ -521,7 +521,6 @@
+       } else
+               return sp->page.private;
+ }
+-EXPORT_SYMBOL(ksize);
+ struct kmem_cache {
+       unsigned int size, align;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/slub.c linux-2.6.29-rc3.owrt/mm/slub.c
+--- linux-2.6.29.owrt/mm/slub.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/slub.c    2009-05-10 23:48:33.000000000 +0200
+@@ -1996,7 +1996,7 @@
+ static void free_kmem_cache_cpu(struct kmem_cache_cpu *c, int cpu)
+ {
+       if (c < per_cpu(kmem_cache_cpu, cpu) ||
+-                      c >= per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) {
++                      c > per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) {
+               kfree(c);
+               return;
+       }
+@@ -2736,7 +2736,6 @@
+        */
+       return s->size;
+ }
+-EXPORT_SYMBOL(ksize);
+ void kfree(const void *x)
+ {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/swapfile.c linux-2.6.29-rc3.owrt/mm/swapfile.c
+--- linux-2.6.29.owrt/mm/swapfile.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/swapfile.c        2009-05-10 23:48:33.000000000 +0200
+@@ -635,7 +635,7 @@
+               if (!bdev) {
+                       if (bdev_p)
+-                              *bdev_p = bdget(sis->bdev->bd_dev);
++                              *bdev_p = sis->bdev;
+                       spin_unlock(&swap_lock);
+                       return i;
+@@ -647,7 +647,7 @@
+                                       struct swap_extent, list);
+                       if (se->start_block == offset) {
+                               if (bdev_p)
+-                                      *bdev_p = bdget(sis->bdev->bd_dev);
++                                      *bdev_p = sis->bdev;
+                               spin_unlock(&swap_lock);
+                               bdput(bdev);
+@@ -698,10 +698,8 @@
+       pte_t *pte;
+       int ret = 1;
+-      if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) {
++      if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr))
+               ret = -ENOMEM;
+-              goto out_nolock;
+-      }
+       pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+       if (unlikely(!pte_same(*pte, swp_entry_to_pte(entry)))) {
+@@ -725,7 +723,6 @@
+       activate_page(page);
+ out:
+       pte_unmap_unlock(pte, ptl);
+-out_nolock:
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/util.c linux-2.6.29-rc3.owrt/mm/util.c
+--- linux-2.6.29.owrt/mm/util.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/util.c    2009-05-10 23:48:33.000000000 +0200
+@@ -129,26 +129,6 @@
+ }
+ EXPORT_SYMBOL(krealloc);
+-/**
+- * kzfree - like kfree but zero memory
+- * @p: object to free memory of
+- *
+- * The memory of the object @p points to is zeroed before freed.
+- * If @p is %NULL, kzfree() does nothing.
+- */
+-void kzfree(const void *p)
+-{
+-      size_t ks;
+-      void *mem = (void *)p;
+-
+-      if (unlikely(ZERO_OR_NULL_PTR(mem)))
+-              return;
+-      ks = ksize(mem);
+-      memset(mem, 0, ks);
+-      kfree(mem);
+-}
+-EXPORT_SYMBOL(kzfree);
+-
+ /*
+  * strndup_user - duplicate an existing string from user space
+  * @s: The string to duplicate
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/vmalloc.c linux-2.6.29-rc3.owrt/mm/vmalloc.c
+--- linux-2.6.29.owrt/mm/vmalloc.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/vmalloc.c 2009-05-10 23:48:33.000000000 +0200
+@@ -323,7 +323,6 @@
+       unsigned long addr;
+       int purged = 0;
+-      BUG_ON(!size);
+       BUG_ON(size & ~PAGE_MASK);
+       va = kmalloc_node(sizeof(struct vmap_area),
+@@ -335,9 +334,6 @@
+       addr = ALIGN(vstart, align);
+       spin_lock(&vmap_area_lock);
+-      if (addr + size - 1 < addr)
+-              goto overflow;
+-
+       /* XXX: could have a last_hole cache */
+       n = vmap_area_root.rb_node;
+       if (n) {
+@@ -369,8 +365,6 @@
+               while (addr + size > first->va_start && addr + size <= vend) {
+                       addr = ALIGN(first->va_end + PAGE_SIZE, align);
+-                      if (addr + size - 1 < addr)
+-                              goto overflow;
+                       n = rb_next(&first->rb_node);
+                       if (n)
+@@ -381,7 +375,6 @@
+       }
+ found:
+       if (addr + size > vend) {
+-overflow:
+               spin_unlock(&vmap_area_lock);
+               if (!purged) {
+                       purge_vmap_area_lazy();
+@@ -505,7 +498,6 @@
+       static DEFINE_SPINLOCK(purge_lock);
+       LIST_HEAD(valist);
+       struct vmap_area *va;
+-      struct vmap_area *n_va;
+       int nr = 0;
+       /*
+@@ -545,7 +537,7 @@
+       if (nr) {
+               spin_lock(&vmap_area_lock);
+-              list_for_each_entry_safe(va, n_va, &valist, purge_list)
++              list_for_each_entry(va, &valist, purge_list)
+                       __free_vmap_area(va);
+               spin_unlock(&vmap_area_lock);
+       }
+@@ -1020,8 +1012,6 @@
+ void unmap_kernel_range(unsigned long addr, unsigned long size)
+ {
+       unsigned long end = addr + size;
+-
+-      flush_cache_vunmap(addr, end);
+       vunmap_page_range(addr, end);
+       flush_tlb_kernel_range(addr, end);
+ }
+@@ -1117,14 +1107,6 @@
+ }
+ EXPORT_SYMBOL_GPL(__get_vm_area);
+-struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
+-                                     unsigned long start, unsigned long end,
+-                                     void *caller)
+-{
+-      return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+-                                caller);
+-}
+-
+ /**
+  *    get_vm_area  -  reserve a contiguous kernel virtual area
+  *    @size:          size of the area
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/mm/vmscan.c linux-2.6.29-rc3.owrt/mm/vmscan.c
+--- linux-2.6.29.owrt/mm/vmscan.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/mm/vmscan.c  2009-05-10 23:48:33.000000000 +0200
+@@ -1262,6 +1262,7 @@
+        * Move the pages to the [file or anon] inactive list.
+        */
+       pagevec_init(&pvec, 1);
++      pgmoved = 0;
+       lru = LRU_BASE + file * LRU_FILE;
+       spin_lock_irq(&zone->lru_lock);
+@@ -1273,7 +1274,6 @@
+        */
+       reclaim_stat->recent_rotated[!!file] += pgmoved;
+-      pgmoved = 0;
+       while (!list_empty(&l_inactive)) {
+               page = lru_to_page(&l_inactive);
+               prefetchw_prev_lru_page(page, &l_inactive, flags);
+@@ -1469,7 +1469,7 @@
+               int file = is_file_lru(l);
+               int scan;
+-              scan = zone_nr_pages(zone, sc, l);
++              scan = zone_page_state(zone, NR_LRU_BASE + l);
+               if (priority) {
+                       scan >>= priority;
+                       scan = (scan * percent[file]) / 100;
+@@ -2057,31 +2057,31 @@
+                                     int pass, struct scan_control *sc)
+ {
+       struct zone *zone;
+-      unsigned long ret = 0;
++      unsigned long nr_to_scan, ret = 0;
++      enum lru_list l;
+       for_each_zone(zone) {
+-              enum lru_list l;
+               if (!populated_zone(zone))
+                       continue;
++
+               if (zone_is_all_unreclaimable(zone) && prio != DEF_PRIORITY)
+                       continue;
+               for_each_evictable_lru(l) {
+-                      enum zone_stat_item ls = NR_LRU_BASE + l;
+-                      unsigned long lru_pages = zone_page_state(zone, ls);
+-
+                       /* For pass = 0, we don't shrink the active list */
+-                      if (pass == 0 && (l == LRU_ACTIVE_ANON ||
+-                                              l == LRU_ACTIVE_FILE))
++                      if (pass == 0 &&
++                              (l == LRU_ACTIVE || l == LRU_ACTIVE_FILE))
+                               continue;
+-                      zone->lru[l].nr_scan += (lru_pages >> prio) + 1;
++                      zone->lru[l].nr_scan +=
++                              (zone_page_state(zone, NR_LRU_BASE + l)
++                                                              >> prio) + 1;
+                       if (zone->lru[l].nr_scan >= nr_pages || pass > 3) {
+-                              unsigned long nr_to_scan;
+-
+                               zone->lru[l].nr_scan = 0;
+-                              nr_to_scan = min(nr_pages, lru_pages);
++                              nr_to_scan = min(nr_pages,
++                                      zone_page_state(zone,
++                                                      NR_LRU_BASE + l));
+                               ret += shrink_list(l, nr_to_scan, zone,
+                                                               sc, prio);
+                               if (ret >= nr_pages)
+@@ -2089,6 +2089,7 @@
+                       }
+               }
+       }
++
+       return ret;
+ }
+@@ -2111,6 +2112,7 @@
+               .may_swap = 0,
+               .swap_cluster_max = nr_pages,
+               .may_writepage = 1,
++              .swappiness = vm_swappiness,
+               .isolate_pages = isolate_pages_global,
+       };
+@@ -2144,8 +2146,10 @@
+               int prio;
+               /* Force reclaiming mapped pages in the passes #3 and #4 */
+-              if (pass > 2)
++              if (pass > 2) {
+                       sc.may_swap = 1;
++                      sc.swappiness = 100;
++              }
+               for (prio = DEF_PRIORITY; prio >= 0; prio--) {
+                       unsigned long nr_to_scan = nr_pages - ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/802/tr.c linux-2.6.29-rc3.owrt/net/802/tr.c
+--- linux-2.6.29.owrt/net/802/tr.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/802/tr.c 2009-05-10 23:48:33.000000000 +0200
+@@ -668,5 +668,3 @@
+ EXPORT_SYMBOL(tr_type_trans);
+ EXPORT_SYMBOL(alloc_trdev);
+-
+-MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/8021q/vlan_core.c linux-2.6.29-rc3.owrt/net/8021q/vlan_core.c
+--- linux-2.6.29.owrt/net/8021q/vlan_core.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/8021q/vlan_core.c        2009-05-10 23:48:33.000000000 +0200
+@@ -1,16 +1,12 @@
+ #include <linux/skbuff.h>
+ #include <linux/netdevice.h>
+ #include <linux/if_vlan.h>
+-#include <linux/netpoll.h>
+ #include "vlan.h"
+ /* VLAN rx hw acceleration helper.  This acts like netif_{rx,receive_skb}(). */
+ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
+                     u16 vlan_tci, int polling)
+ {
+-      if (netpoll_rx(skb))
+-              return NET_RX_DROP;
+-
+       if (skb_bond_should_drop(skb))
+               goto drop;
+@@ -104,9 +100,6 @@
+ {
+       int err = NET_RX_SUCCESS;
+-      if (netpoll_receive_skb(skb))
+-              return NET_RX_DROP;
+-
+       switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
+       case -1:
+               return netif_receive_skb(skb);
+@@ -133,9 +126,6 @@
+       if (!skb)
+               goto out;
+-      if (netpoll_receive_skb(skb))
+-              goto out;
+-
+       err = NET_RX_SUCCESS;
+       switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/8021q/vlan_dev.c linux-2.6.29-rc3.owrt/net/8021q/vlan_dev.c
+--- linux-2.6.29.owrt/net/8021q/vlan_dev.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/8021q/vlan_dev.c 2009-05-10 23:48:33.000000000 +0200
+@@ -553,7 +553,7 @@
+       int err = 0;
+       if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
+-              err = ops->ndo_neigh_setup(real_dev, pa);
++              err = ops->ndo_neigh_setup(dev, pa);
+       return err;
+ }
+@@ -639,7 +639,6 @@
+               dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
+               dev->netdev_ops         = &vlan_netdev_ops;
+       }
+-      netdev_resync_ops(dev);
+       if (is_vlan_dev(real_dev))
+               subclass = 1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/9p/protocol.c linux-2.6.29-rc3.owrt/net/9p/protocol.c
+--- linux-2.6.29.owrt/net/9p/protocol.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/9p/protocol.c    2009-05-10 23:48:33.000000000 +0200
+@@ -29,7 +29,6 @@
+ #include <linux/errno.h>
+ #include <linux/uaccess.h>
+ #include <linux/sched.h>
+-#include <linux/types.h>
+ #include <net/9p/9p.h>
+ #include <net/9p/client.h>
+ #include "protocol.h"
+@@ -161,32 +160,29 @@
+                       break;
+               case 'w':{
+                               int16_t *val = va_arg(ap, int16_t *);
+-                              __le16 le_val;
+-                              if (pdu_read(pdu, &le_val, sizeof(le_val))) {
++                              if (pdu_read(pdu, val, sizeof(*val))) {
+                                       errcode = -EFAULT;
+                                       break;
+                               }
+-                              *val = le16_to_cpu(le_val);
++                              *val = cpu_to_le16(*val);
+                       }
+                       break;
+               case 'd':{
+                               int32_t *val = va_arg(ap, int32_t *);
+-                              __le32 le_val;
+-                              if (pdu_read(pdu, &le_val, sizeof(le_val))) {
++                              if (pdu_read(pdu, val, sizeof(*val))) {
+                                       errcode = -EFAULT;
+                                       break;
+                               }
+-                              *val = le32_to_cpu(le_val);
++                              *val = cpu_to_le32(*val);
+                       }
+                       break;
+               case 'q':{
+                               int64_t *val = va_arg(ap, int64_t *);
+-                              __le64 le_val;
+-                              if (pdu_read(pdu, &le_val, sizeof(le_val))) {
++                              if (pdu_read(pdu, val, sizeof(*val))) {
+                                       errcode = -EFAULT;
+                                       break;
+                               }
+-                              *val = le64_to_cpu(le_val);
++                              *val = cpu_to_le64(*val);
+                       }
+                       break;
+               case 's':{
+@@ -366,19 +362,19 @@
+                       }
+                       break;
+               case 'w':{
+-                              __le16 val = cpu_to_le16(va_arg(ap, int));
++                              int16_t val = va_arg(ap, int);
+                               if (pdu_write(pdu, &val, sizeof(val)))
+                                       errcode = -EFAULT;
+                       }
+                       break;
+               case 'd':{
+-                              __le32 val = cpu_to_le32(va_arg(ap, int32_t));
++                              int32_t val = va_arg(ap, int32_t);
+                               if (pdu_write(pdu, &val, sizeof(val)))
+                                       errcode = -EFAULT;
+                       }
+                       break;
+               case 'q':{
+-                              __le64 val = cpu_to_le64(va_arg(ap, int64_t));
++                              int64_t val = va_arg(ap, int64_t);
+                               if (pdu_write(pdu, &val, sizeof(val)))
+                                       errcode = -EFAULT;
+                       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/bridge/br_forward.c linux-2.6.29-rc3.owrt/net/bridge/br_forward.c
+--- linux-2.6.29.owrt/net/bridge/br_forward.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/bridge/br_forward.c      2009-05-10 23:48:33.000000000 +0200
+@@ -67,11 +67,6 @@
+ {
+       struct net_device *indev;
+-      if (skb_warn_if_lro(skb)) {
+-              kfree_skb(skb);
+-              return;
+-      }
+-
+       indev = skb->dev;
+       skb->dev = to->dev;
+       skb_forward_csum(skb);
+@@ -94,7 +89,7 @@
+ /* called with rcu_read_lock */
+ void br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
+ {
+-      if (should_deliver(to, skb)) {
++      if (!skb_warn_if_lro(skb) && should_deliver(to, skb)) {
+               __br_forward(to, skb);
+               return;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/dev.c linux-2.6.29-rc3.owrt/net/core/dev.c
+--- linux-2.6.29.owrt/net/core/dev.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/dev.c       2009-05-10 23:48:33.000000000 +0200
+@@ -1093,7 +1093,7 @@
+               /*
+                *      Enable NET_DMA
+                */
+-              net_dmaengine_get();
++              dmaengine_get();
+               /*
+                *      Initialize multicasting status
+@@ -1175,7 +1175,7 @@
+       /*
+        *      Shutdown NET_DMA
+        */
+-      net_dmaengine_put();
++      dmaengine_put();
+       return 0;
+ }
+@@ -2274,6 +2274,12 @@
+       rcu_read_lock();
++      /* Don't receive packets in an exiting network namespace */
++      if (!net_alive(dev_net(skb->dev))) {
++              kfree_skb(skb);
++              goto out;
++      }
++
+ #ifdef CONFIG_NET_CLS_ACT
+       if (skb->tc_verd & TC_NCLS) {
+               skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
+@@ -2489,9 +2495,6 @@
+ int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+ {
+-      if (netpoll_receive_skb(skb))
+-              return NET_RX_DROP;
+-
+       switch (__napi_gro_receive(napi, skb)) {
+       case -1:
+               return netif_receive_skb(skb);
+@@ -2562,9 +2565,6 @@
+       if (!skb)
+               goto out;
+-      if (netpoll_receive_skb(skb))
+-              goto out;
+-
+       err = NET_RX_SUCCESS;
+       switch (__napi_gro_receive(napi, skb)) {
+@@ -2595,9 +2595,9 @@
+               local_irq_disable();
+               skb = __skb_dequeue(&queue->input_pkt_queue);
+               if (!skb) {
++                      __napi_complete(napi);
+                       local_irq_enable();
+-                      napi_complete(napi);
+-                      goto out;
++                      break;
+               }
+               local_irq_enable();
+@@ -2606,7 +2606,6 @@
+       napi_gro_flush(napi);
+-out:
+       return work;
+ }
+@@ -2679,7 +2678,7 @@
+       struct sk_buff *skb, *next;
+       list_del_init(&napi->dev_list);
+-      kfree_skb(napi->skb);
++      kfree(napi->skb);
+       for (skb = napi->gro_list; skb; skb = next) {
+               next = skb->next;
+@@ -4290,39 +4289,6 @@
+ }
+ EXPORT_SYMBOL(netdev_fix_features);
+-/* Some devices need to (re-)set their netdev_ops inside
+- * ->init() or similar.  If that happens, we have to setup
+- * the compat pointers again.
+- */
+-void netdev_resync_ops(struct net_device *dev)
+-{
+-#ifdef CONFIG_COMPAT_NET_DEV_OPS
+-      const struct net_device_ops *ops = dev->netdev_ops;
+-
+-      dev->init = ops->ndo_init;
+-      dev->uninit = ops->ndo_uninit;
+-      dev->open = ops->ndo_open;
+-      dev->change_rx_flags = ops->ndo_change_rx_flags;
+-      dev->set_rx_mode = ops->ndo_set_rx_mode;
+-      dev->set_multicast_list = ops->ndo_set_multicast_list;
+-      dev->set_mac_address = ops->ndo_set_mac_address;
+-      dev->validate_addr = ops->ndo_validate_addr;
+-      dev->do_ioctl = ops->ndo_do_ioctl;
+-      dev->set_config = ops->ndo_set_config;
+-      dev->change_mtu = ops->ndo_change_mtu;
+-      dev->neigh_setup = ops->ndo_neigh_setup;
+-      dev->tx_timeout = ops->ndo_tx_timeout;
+-      dev->get_stats = ops->ndo_get_stats;
+-      dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+-      dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+-      dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+-      dev->poll_controller = ops->ndo_poll_controller;
+-#endif
+-#endif
+-}
+-EXPORT_SYMBOL(netdev_resync_ops);
+-
+ /**
+  *    register_netdevice      - register a network device
+  *    @dev: device to register
+@@ -4367,7 +4333,27 @@
+        * This is temporary until all network devices are converted.
+        */
+       if (dev->netdev_ops) {
+-              netdev_resync_ops(dev);
++              const struct net_device_ops *ops = dev->netdev_ops;
++
++              dev->init = ops->ndo_init;
++              dev->uninit = ops->ndo_uninit;
++              dev->open = ops->ndo_open;
++              dev->change_rx_flags = ops->ndo_change_rx_flags;
++              dev->set_rx_mode = ops->ndo_set_rx_mode;
++              dev->set_multicast_list = ops->ndo_set_multicast_list;
++              dev->set_mac_address = ops->ndo_set_mac_address;
++              dev->validate_addr = ops->ndo_validate_addr;
++              dev->do_ioctl = ops->ndo_do_ioctl;
++              dev->set_config = ops->ndo_set_config;
++              dev->change_mtu = ops->ndo_change_mtu;
++              dev->tx_timeout = ops->ndo_tx_timeout;
++              dev->get_stats = ops->ndo_get_stats;
++              dev->vlan_rx_register = ops->ndo_vlan_rx_register;
++              dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
++              dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++              dev->poll_controller = ops->ndo_poll_controller;
++#endif
+       } else {
+               char drivername[64];
+               pr_info("%s (%s): not using net_device_ops yet\n",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/neighbour.c linux-2.6.29-rc3.owrt/net/core/neighbour.c
+--- linux-2.6.29.owrt/net/core/neighbour.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/neighbour.c 2009-05-10 23:48:33.000000000 +0200
+@@ -1994,8 +1994,8 @@
+                       if (!net_eq(neigh_parms_net(p), net))
+                               continue;
+-                      if (nidx < neigh_skip)
+-                              goto next;
++                      if (nidx++ < neigh_skip)
++                              continue;
+                       if (neightbl_fill_param_info(skb, tbl, p,
+                                                    NETLINK_CB(cb->skb).pid,
+@@ -2003,8 +2003,6 @@
+                                                    RTM_NEWNEIGHTBL,
+                                                    NLM_F_MULTI) <= 0)
+                               goto out;
+-              next:
+-                      nidx++;
+               }
+               neigh_skip = 0;
+@@ -2084,10 +2082,12 @@
+               if (h > s_h)
+                       s_idx = 0;
+               for (n = tbl->hash_buckets[h], idx = 0; n; n = n->next) {
++                      int lidx;
+                       if (dev_net(n->dev) != net)
+                               continue;
+-                      if (idx < s_idx)
+-                              goto next;
++                      lidx = idx++;
++                      if (lidx < s_idx)
++                              continue;
+                       if (neigh_fill_info(skb, n, NETLINK_CB(cb->skb).pid,
+                                           cb->nlh->nlmsg_seq,
+                                           RTM_NEWNEIGH,
+@@ -2096,8 +2096,6 @@
+                               rc = -1;
+                               goto out;
+                       }
+-              next:
+-                      idx++;
+               }
+       }
+       read_unlock_bh(&tbl->lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/net_namespace.c linux-2.6.29-rc3.owrt/net/core/net_namespace.c
+--- linux-2.6.29.owrt/net/core/net_namespace.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/net_namespace.c     2009-05-10 23:48:33.000000000 +0200
+@@ -32,14 +32,24 @@
+ {
+       /* Must be called with net_mutex held */
+       struct pernet_operations *ops;
+-      int error = 0;
++      int error;
++      struct net_generic *ng;
+       atomic_set(&net->count, 1);
+-
+ #ifdef NETNS_REFCNT_DEBUG
+       atomic_set(&net->use_count, 0);
+ #endif
++      error = -ENOMEM;
++      ng = kzalloc(sizeof(struct net_generic) +
++                      INITIAL_NET_GEN_PTRS * sizeof(void *), GFP_KERNEL);
++      if (ng == NULL)
++              goto out;
++
++      ng->len = INITIAL_NET_GEN_PTRS;
++      rcu_assign_pointer(net->gen, ng);
++
++      error = 0;
+       list_for_each_entry(ops, &pernet_list, list) {
+               if (ops->init) {
+                       error = ops->init(net);
+@@ -60,50 +70,24 @@
+       }
+       rcu_barrier();
++      kfree(ng);
+       goto out;
+ }
+-static struct net_generic *net_alloc_generic(void)
+-{
+-      struct net_generic *ng;
+-      size_t generic_size = sizeof(struct net_generic) +
+-              INITIAL_NET_GEN_PTRS * sizeof(void *);
+-
+-      ng = kzalloc(generic_size, GFP_KERNEL);
+-      if (ng)
+-              ng->len = INITIAL_NET_GEN_PTRS;
+-
+-      return ng;
+-}
+-
+ #ifdef CONFIG_NET_NS
+ static struct kmem_cache *net_cachep;
+ static struct workqueue_struct *netns_wq;
+ static struct net *net_alloc(void)
+ {
+-      struct net *net = NULL;
+-      struct net_generic *ng;
+-
+-      ng = net_alloc_generic();
+-      if (!ng)
+-              goto out;
+-
+-      net = kmem_cache_zalloc(net_cachep, GFP_KERNEL);
+-      if (!net)
+-              goto out_free;
+-
+-      rcu_assign_pointer(net->gen, ng);
+-out:
+-      return net;
+-
+-out_free:
+-      kfree(ng);
+-      goto out;
++      return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
+ }
+ static void net_free(struct net *net)
+ {
++      if (!net)
++              return;
++
+ #ifdef NETNS_REFCNT_DEBUG
+       if (unlikely(atomic_read(&net->use_count) != 0)) {
+               printk(KERN_EMERG "network namespace not free! Usage: %d\n",
+@@ -128,28 +112,27 @@
+       err = -ENOMEM;
+       new_net = net_alloc();
+       if (!new_net)
+-              goto out_err;
++              goto out;
+       mutex_lock(&net_mutex);
+       err = setup_net(new_net);
+-      if (!err) {
+-              rtnl_lock();
+-              list_add_tail(&new_net->list, &net_namespace_list);
+-              rtnl_unlock();
+-      }
+-      mutex_unlock(&net_mutex);
+-
+       if (err)
+-              goto out_free;
++              goto out_unlock;
++
++      rtnl_lock();
++      list_add_tail(&new_net->list, &net_namespace_list);
++      rtnl_unlock();
++
++
++out_unlock:
++      mutex_unlock(&net_mutex);
+ out:
+       put_net(old_net);
++      if (err) {
++              net_free(new_net);
++              new_net = ERR_PTR(err);
++      }
+       return new_net;
+-
+-out_free:
+-      net_free(new_net);
+-out_err:
+-      new_net = ERR_PTR(err);
+-      goto out;
+ }
+ static void cleanup_net(struct work_struct *work)
+@@ -157,6 +140,9 @@
+       struct pernet_operations *ops;
+       struct net *net;
++      /* Be very certain incoming network packets will not find us */
++      rcu_barrier();
++
+       net = container_of(work, struct net, work);
+       mutex_lock(&net_mutex);
+@@ -202,7 +188,6 @@
+ static int __init net_ns_init(void)
+ {
+-      struct net_generic *ng;
+       int err;
+       printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
+@@ -217,12 +202,6 @@
+               panic("Could not create netns workq");
+ #endif
+-      ng = net_alloc_generic();
+-      if (!ng)
+-              panic("Could not allocate generic netns");
+-
+-      rcu_assign_pointer(init_net.gen, ng);
+-
+       mutex_lock(&net_mutex);
+       err = setup_net(&init_net);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/net-sysfs.c linux-2.6.29-rc3.owrt/net/core/net-sysfs.c
+--- linux-2.6.29.owrt/net/core/net-sysfs.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/net-sysfs.c 2009-05-10 23:48:33.000000000 +0200
+@@ -77,9 +77,7 @@
+       if (endp == buf)
+               goto err;
+-      if (!rtnl_trylock())
+-              return -ERESTARTSYS;
+-
++      rtnl_lock();
+       if (dev_isalive(net)) {
+               if ((ret = (*set)(net, new)) == 0)
+                       ret = len;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/skbuff.c linux-2.6.29-rc3.owrt/net/core/skbuff.c
+--- linux-2.6.29.owrt/net/core/skbuff.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/skbuff.c    2009-05-10 23:48:33.000000000 +0200
+@@ -220,6 +220,14 @@
+       BUG();
+ }
++void skb_truesize_bug(struct sk_buff *skb)
++{
++      WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) "
++             "len=%u, sizeof(sk_buff)=%Zd\n",
++             skb->truesize, skb->len, sizeof(struct sk_buff));
++}
++EXPORT_SYMBOL(skb_truesize_bug);
++
+ /*    Allocate a new skbuff. We do this ourselves so we can fill in a few
+  *    'private' fields and also do memory statistics to find all the
+  *    [BEEP] leaks.
+@@ -2293,10 +2301,10 @@
+               return 0;
+ next_skb:
+-      block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
++      block_limit = skb_headlen(st->cur_skb);
+       if (abs_offset < block_limit) {
+-              *data = st->cur_skb->data + (abs_offset - st->stepped_offset);
++              *data = st->cur_skb->data + abs_offset;
+               return block_limit - abs_offset;
+       }
+@@ -2331,15 +2339,14 @@
+               st->frag_data = NULL;
+       }
+-      if (st->root_skb == st->cur_skb &&
+-          skb_shinfo(st->root_skb)->frag_list) {
+-              st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+-              st->frag_idx = 0;
+-              goto next_skb;
+-      } else if (st->cur_skb->next) {
++      if (st->cur_skb->next) {
+               st->cur_skb = st->cur_skb->next;
+               st->frag_idx = 0;
+               goto next_skb;
++      } else if (st->root_skb == st->cur_skb &&
++                 skb_shinfo(st->root_skb)->frag_list) {
++              st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
++              goto next_skb;
+       }
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/core/sock.c linux-2.6.29-rc3.owrt/net/core/sock.c
+--- linux-2.6.29.owrt/net/core/sock.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/core/sock.c      2009-05-10 23:48:33.000000000 +0200
+@@ -696,8 +696,6 @@
+       if (len < 0)
+               return -EINVAL;
+-      memset(&v, 0, sizeof(v));
+-
+       switch(optname) {
+       case SO_DEBUG:
+               v.val = sock_flag(sk, SOCK_DBG);
+@@ -1137,6 +1135,7 @@
+ {
+       struct sock *sk = skb->sk;
++      skb_truesize_check(skb);
+       atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
+       sk_mem_uncharge(skb->sk, skb->truesize);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/cipso_ipv4.c linux-2.6.29-rc3.owrt/net/ipv4/cipso_ipv4.c
+--- linux-2.6.29.owrt/net/ipv4/cipso_ipv4.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/cipso_ipv4.c        2009-05-10 23:48:33.000000000 +0200
+@@ -3,16 +3,11 @@
+  *
+  * This is an implementation of the CIPSO 2.2 protocol as specified in
+  * draft-ietf-cipso-ipsecurity-01.txt with additional tag types as found in
+- * FIPS-188.  While CIPSO never became a full IETF RFC standard many vendors
++ * FIPS-188, copies of both documents can be found in the Documentation
++ * directory.  While CIPSO never became a full IETF RFC standard many vendors
+  * have chosen to adopt the protocol and over the years it has become a
+  * de-facto standard for labeled networking.
+  *
+- * The CIPSO draft specification can be found in the kernel's Documentation
+- * directory as well as the following URL:
+- *   http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
+- * The FIPS-188 specification can be found at the following URL:
+- *   http://www.itl.nist.gov/fipspubs/fip188.htm
+- *
+  * Author: Paul Moore <paul.moore@hp.com>
+  *
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/icmp.c linux-2.6.29-rc3.owrt/net/ipv4/icmp.c
+--- linux-2.6.29.owrt/net/ipv4/icmp.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/icmp.c      2009-05-10 23:48:33.000000000 +0200
+@@ -1205,7 +1205,7 @@
+ int __init icmp_init(void)
+ {
+-      return register_pernet_subsys(&icmp_sk_ops);
++      return register_pernet_device(&icmp_sk_ops);
+ }
+ EXPORT_SYMBOL(icmp_err_convert);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/ipconfig.c linux-2.6.29-rc3.owrt/net/ipv4/ipconfig.c
+--- linux-2.6.29.owrt/net/ipv4/ipconfig.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/ipconfig.c  2009-05-10 23:48:33.000000000 +0200
+@@ -1268,9 +1268,6 @@
+ static int __init ip_auto_config(void)
+ {
+       __be32 addr;
+-#ifdef IPCONFIG_DYNAMIC
+-      int retries = CONF_OPEN_RETRIES;
+-#endif
+ #ifdef CONFIG_PROC_FS
+       proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
+@@ -1307,6 +1304,9 @@
+ #endif
+           ic_first_dev->next) {
+ #ifdef IPCONFIG_DYNAMIC
++
++              int retries = CONF_OPEN_RETRIES;
++
+               if (ic_dynamic() < 0) {
+                       ic_close_devs();
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/ip_fragment.c linux-2.6.29-rc3.owrt/net/ipv4/ip_fragment.c
+--- linux-2.6.29.owrt/net/ipv4/ip_fragment.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/ip_fragment.c       2009-05-10 23:48:33.000000000 +0200
+@@ -463,7 +463,6 @@
+ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
+                        struct net_device *dev)
+ {
+-      struct net *net = container_of(qp->q.net, struct net, ipv4.frags);
+       struct iphdr *iph;
+       struct sk_buff *fp, *head = qp->q.fragments;
+       int len;
+@@ -549,7 +548,7 @@
+       iph = ip_hdr(head);
+       iph->frag_off = 0;
+       iph->tot_len = htons(len);
+-      IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
++      IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMOKS);
+       qp->q.fragments = NULL;
+       return 0;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/tcp.c linux-2.6.29-rc3.owrt/net/ipv4/tcp.c
+--- linux-2.6.29.owrt/net/ipv4/tcp.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/tcp.c       2009-05-10 23:48:33.000000000 +0200
+@@ -524,8 +524,7 @@
+       struct tcp_splice_state *tss = rd_desc->arg.data;
+       int ret;
+-      ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len),
+-                            tss->flags);
++      ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+       if (ret > 0)
+               rd_desc->count -= ret;
+       return ret;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/tcp_input.c linux-2.6.29-rc3.owrt/net/ipv4/tcp_input.c
+--- linux-2.6.29.owrt/net/ipv4/tcp_input.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/tcp_input.c 2009-05-10 23:48:34.000000000 +0200
+@@ -1374,8 +1374,7 @@
+ static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
+                          struct tcp_sacktag_state *state,
+-                         unsigned int pcount, int shifted, int mss,
+-                         int dup_sack)
++                         unsigned int pcount, int shifted, int mss)
+ {
+       struct tcp_sock *tp = tcp_sk(sk);
+       struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
+@@ -1411,7 +1410,7 @@
+       }
+       /* We discard results */
+-      tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
++      tcp_sacktag_one(skb, sk, state, 0, pcount);
+       /* Difference in this won't matter, both ACKed by the same cumul. ACK */
+       TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
+@@ -1562,7 +1561,7 @@
+       if (!skb_shift(prev, skb, len))
+               goto fallback;
+-      if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
++      if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss))
+               goto out;
+       /* Hole filled allows collapsing with the next as well, this is very
+@@ -1581,7 +1580,7 @@
+       len = skb->len;
+       if (skb_shift(prev, skb, len)) {
+               pcount += tcp_skb_pcount(skb);
+-              tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
++              tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss);
+       }
+ out:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/tcp_ipv4.c linux-2.6.29-rc3.owrt/net/ipv4/tcp_ipv4.c
+--- linux-2.6.29.owrt/net/ipv4/tcp_ipv4.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/tcp_ipv4.c  2009-05-10 23:48:34.000000000 +0200
+@@ -2443,7 +2443,7 @@
+ void __init tcp_v4_init(void)
+ {
+       inet_hashinfo_init(&tcp_hashinfo);
+-      if (register_pernet_subsys(&tcp_sk_ops))
++      if (register_pernet_device(&tcp_sk_ops))
+               panic("Failed to create the TCP control socket.\n");
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/tcp_output.c linux-2.6.29-rc3.owrt/net/ipv4/tcp_output.c
+--- linux-2.6.29.owrt/net/ipv4/tcp_output.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/tcp_output.c        2009-05-10 23:48:34.000000000 +0200
+@@ -663,10 +663,14 @@
+       th->urg_ptr             = 0;
+       /* The urg_mode check is necessary during a below snd_una win probe */
+-      if (unlikely(tcp_urg_mode(tp) &&
+-                   between(tp->snd_up, tcb->seq + 1, tcb->seq + 0xFFFF))) {
+-              th->urg_ptr             = htons(tp->snd_up - tcb->seq);
+-              th->urg                 = 1;
++      if (unlikely(tcp_urg_mode(tp))) {
++              if (between(tp->snd_up, tcb->seq + 1, tcb->seq + 0xFFFF)) {
++                      th->urg_ptr = htons(tp->snd_up - tcb->seq);
++                      th->urg = 1;
++              } else if (after(tcb->seq + 0xFFFF, tp->snd_nxt)) {
++                      th->urg_ptr = 0xFFFF;
++                      th->urg = 1;
++              }
+       }
+       tcp_options_write((__be32 *)(th + 1), tp, &opts, &md5_hash_location);
+@@ -2023,6 +2027,7 @@
+               last_lost = tp->snd_una;
+       }
++      /* First pass: retransmit lost packets. */
+       tcp_for_write_queue_from(skb, sk) {
+               __u8 sacked = TCP_SKB_CB(skb)->sacked;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/tcp_scalable.c linux-2.6.29-rc3.owrt/net/ipv4/tcp_scalable.c
+--- linux-2.6.29.owrt/net/ipv4/tcp_scalable.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/tcp_scalable.c      2009-05-10 23:48:34.000000000 +0200
+@@ -1,6 +1,6 @@
+ /* Tom Kelly's Scalable TCP
+  *
+- * See http://www.deneholme.net/tom/scalable/
++ * See htt://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+  *
+  * John Heffner <jheffner@sc.edu>
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv4/udp.c linux-2.6.29-rc3.owrt/net/ipv4/udp.c
+--- linux-2.6.29.owrt/net/ipv4/udp.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv4/udp.c       2009-05-10 23:48:34.000000000 +0200
+@@ -120,11 +120,8 @@
+ atomic_t udp_memory_allocated;
+ EXPORT_SYMBOL(udp_memory_allocated);
+-#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+-
+ static int udp_lib_lport_inuse(struct net *net, __u16 num,
+                              const struct udp_hslot *hslot,
+-                             unsigned long *bitmap,
+                              struct sock *sk,
+                              int (*saddr_comp)(const struct sock *sk1,
+                                                const struct sock *sk2))
+@@ -135,17 +132,12 @@
+       sk_nulls_for_each(sk2, node, &hslot->head)
+               if (net_eq(sock_net(sk2), net)                  &&
+                   sk2 != sk                                   &&
+-                  (bitmap || sk2->sk_hash == num)             &&
++                  sk2->sk_hash == num                         &&
+                   (!sk2->sk_reuse || !sk->sk_reuse)           &&
+                   (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
+                       || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
+-                  (*saddr_comp)(sk, sk2)) {
+-                      if (bitmap)
+-                              __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
+-                                        bitmap);
+-                      else
+-                              return 1;
+-              }
++                  (*saddr_comp)(sk, sk2))
++                      return 1;
+       return 0;
+ }
+@@ -168,47 +160,32 @@
+       if (!snum) {
+               int low, high, remaining;
+               unsigned rand;
+-              unsigned short first, last;
+-              DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN);
++              unsigned short first;
+               inet_get_local_port_range(&low, &high);
+               remaining = (high - low) + 1;
+               rand = net_random();
+-              first = (((u64)rand * remaining) >> 32) + low;
+-              /*
+-               * force rand to be an odd multiple of UDP_HTABLE_SIZE
+-               */
+-              rand = (rand | 1) * UDP_HTABLE_SIZE;
+-              for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
+-                      hslot = &udptable->hash[udp_hashfn(net, first)];
+-                      bitmap_zero(bitmap, PORTS_PER_CHAIN);
++              snum = first = rand % remaining + low;
++              rand |= 1;
++              for (;;) {
++                      hslot = &udptable->hash[udp_hashfn(net, snum)];
+                       spin_lock_bh(&hslot->lock);
+-                      udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
+-                                          saddr_comp);
+-
+-                      snum = first;
+-                      /*
+-                       * Iterate on all possible values of snum for this hash.
+-                       * Using steps of an odd multiple of UDP_HTABLE_SIZE
+-                       * give us randomization and full range coverage.
+-                       */
+-                      do {
+-                              if (low <= snum && snum <= high &&
+-                                  !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+-                                      goto found;
+-                              snum += rand;
+-                      } while (snum != first);
++                      if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
++                              break;
+                       spin_unlock_bh(&hslot->lock);
++                      do {
++                              snum = snum + rand;
++                      } while (snum < low || snum > high);
++                      if (snum == first)
++                              goto fail;
+               }
+-              goto fail;
+       } else {
+               hslot = &udptable->hash[udp_hashfn(net, snum)];
+               spin_lock_bh(&hslot->lock);
+-              if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
++              if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
+                       goto fail_unlock;
+       }
+-found:
+       inet_sk(sk)->num = snum;
+       sk->sk_hash = snum;
+       if (sk_unhashed(sk)) {
+@@ -1015,11 +992,9 @@
+       if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+               /* Note that an ENOMEM error is charged twice */
+-              if (rc == -ENOMEM) {
++              if (rc == -ENOMEM)
+                       UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+                                        is_udplite);
+-                      atomic_inc(&sk->sk_drops);
+-              }
+               goto drop;
+       }
+@@ -1231,10 +1206,11 @@
+                  int proto)
+ {
+       struct sock *sk;
+-      struct udphdr *uh;
++      struct udphdr *uh = udp_hdr(skb);
+       unsigned short ulen;
+       struct rtable *rt = (struct rtable*)skb->dst;
+-      __be32 saddr, daddr;
++      __be32 saddr = ip_hdr(skb)->saddr;
++      __be32 daddr = ip_hdr(skb)->daddr;
+       struct net *net = dev_net(skb->dev);
+       /*
+@@ -1243,7 +1219,6 @@
+       if (!pskb_may_pull(skb, sizeof(struct udphdr)))
+               goto drop;              /* No space for header. */
+-      uh   = udp_hdr(skb);
+       ulen = ntohs(uh->len);
+       if (ulen > skb->len)
+               goto short_packet;
+@@ -1258,9 +1233,6 @@
+       if (udp4_csum_init(skb, uh, proto))
+               goto csum_error;
+-      saddr = ip_hdr(skb)->saddr;
+-      daddr = ip_hdr(skb)->daddr;
+-
+       if (rt->rt_flags & (RTCF_BROADCAST|RTCF_MULTICAST))
+               return __udp4_lib_mcast_deliver(net, skb, uh,
+                               saddr, daddr, udptable);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/addrconf.c linux-2.6.29-rc3.owrt/net/ipv6/addrconf.c
+--- linux-2.6.29.owrt/net/ipv6/addrconf.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/addrconf.c  2009-05-10 23:48:34.000000000 +0200
+@@ -493,17 +493,15 @@
+       read_unlock(&dev_base_lock);
+ }
+-static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
++static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+ {
+       struct net *net;
+       net = (struct net *)table->extra2;
+       if (p == &net->ipv6.devconf_dflt->forwarding)
+-              return 0;
+-
+-      if (!rtnl_trylock())
+-              return -ERESTARTSYS;
++              return;
++      rtnl_lock();
+       if (p == &net->ipv6.devconf_all->forwarding) {
+               __s32 newf = net->ipv6.devconf_all->forwarding;
+               net->ipv6.devconf_dflt->forwarding = newf;
+@@ -514,7 +512,6 @@
+       if (*p)
+               rt6_purge_dflt_routers(net);
+-      return 1;
+ }
+ #endif
+@@ -2611,6 +2608,9 @@
+       ASSERT_RTNL();
++      if ((dev->flags & IFF_LOOPBACK) && how == 1)
++              how = 0;
++
+       rt6_ifdown(net, dev);
+       neigh_ifdown(&nd_tbl, dev);
+@@ -3983,7 +3983,7 @@
+       ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+       if (write)
+-              ret = addrconf_fixup_forwarding(ctl, valp, val);
++              addrconf_fixup_forwarding(ctl, valp, val);
+       return ret;
+ }
+@@ -4019,7 +4019,8 @@
+       }
+       *valp = new;
+-      return addrconf_fixup_forwarding(table, valp, val);
++      addrconf_fixup_forwarding(table, valp, val);
++      return 1;
+ }
+ static struct addrconf_sysctl_table
+@@ -4249,7 +4250,7 @@
+                       .procname       =       "mc_forwarding",
+                       .data           =       &ipv6_devconf.mc_forwarding,
+                       .maxlen         =       sizeof(int),
+-                      .mode           =       0444,
++                      .mode           =       0644,
+                       .proc_handler   =       proc_dointvec,
+               },
+ #endif
+@@ -4445,6 +4446,25 @@
+ EXPORT_SYMBOL(unregister_inet6addr_notifier);
++static void addrconf_net_exit(struct net *net)
++{
++      struct net_device *dev;
++
++      rtnl_lock();
++      /* clean dev list */
++      for_each_netdev(net, dev) {
++              if (__in6_dev_get(dev) == NULL)
++                      continue;
++              addrconf_ifdown(dev, 1);
++      }
++      addrconf_ifdown(net->loopback_dev, 2);
++      rtnl_unlock();
++}
++
++static struct pernet_operations addrconf_net_ops = {
++      .exit = addrconf_net_exit,
++};
++
+ /*
+  *    Init / cleanup code
+  */
+@@ -4486,6 +4506,10 @@
+       if (err)
+               goto errlo;
++      err = register_pernet_device(&addrconf_net_ops);
++      if (err)
++              return err;
++
+       register_netdevice_notifier(&ipv6_dev_notf);
+       addrconf_verify(0);
+@@ -4515,22 +4539,15 @@
+ void addrconf_cleanup(void)
+ {
+       struct inet6_ifaddr *ifa;
+-      struct net_device *dev;
+       int i;
+       unregister_netdevice_notifier(&ipv6_dev_notf);
++      unregister_pernet_device(&addrconf_net_ops);
++
+       unregister_pernet_subsys(&addrconf_ops);
+       rtnl_lock();
+-      /* clean dev list */
+-      for_each_netdev(&init_net, dev) {
+-              if (__in6_dev_get(dev) == NULL)
+-                      continue;
+-              addrconf_ifdown(dev, 1);
+-      }
+-      addrconf_ifdown(init_net.loopback_dev, 2);
+-
+       /*
+        *      Check hash table.
+        */
+@@ -4551,4 +4568,6 @@
+       del_timer(&addr_chk_timer);
+       rtnl_unlock();
++
++      unregister_pernet_subsys(&addrconf_net_ops);
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/af_inet6.c linux-2.6.29-rc3.owrt/net/ipv6/af_inet6.c
+--- linux-2.6.29.owrt/net/ipv6/af_inet6.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/af_inet6.c  2009-05-10 23:48:34.000000000 +0200
+@@ -72,10 +72,6 @@
+ static struct list_head inetsw6[SOCK_MAX];
+ static DEFINE_SPINLOCK(inetsw6_lock);
+-static int disable_ipv6 = 0;
+-module_param_named(disable, disable_ipv6, int, 0);
+-MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+-
+ static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
+ {
+       const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
+@@ -995,21 +991,10 @@
+ {
+       struct sk_buff *dummy_skb;
+       struct list_head *r;
+-      int err = 0;
++      int err;
+       BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
+-      /* Register the socket-side information for inet6_create.  */
+-      for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+-              INIT_LIST_HEAD(r);
+-
+-      if (disable_ipv6) {
+-              printk(KERN_INFO
+-                     "IPv6: Loaded, but administratively disabled, "
+-                     "reboot required to enable\n");
+-              goto out;
+-      }
+-
+       err = proto_register(&tcpv6_prot, 1);
+       if (err)
+               goto out;
+@@ -1027,6 +1012,10 @@
+               goto out_unregister_udplite_proto;
++      /* Register the socket-side information for inet6_create.  */
++      for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
++              INIT_LIST_HEAD(r);
++
+       /* We MUST register RAW sockets before we create the ICMP6,
+        * IGMP6, or NDISC control sockets.
+        */
+@@ -1192,9 +1181,6 @@
+ static void __exit inet6_exit(void)
+ {
+-      if (disable_ipv6)
+-              return;
+-
+       /* First of all disallow new sockets creation. */
+       sock_unregister(PF_INET6);
+       /* Disallow any further netlink messages */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/icmp.c linux-2.6.29-rc3.owrt/net/ipv6/icmp.c
+--- linux-2.6.29.owrt/net/ipv6/icmp.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/icmp.c      2009-05-10 23:48:34.000000000 +0200
+@@ -443,10 +443,10 @@
+       if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
+               goto relookup_failed;
+-      if (ip6_dst_lookup(sk, &dst2, &fl2))
++      if (ip6_dst_lookup(sk, &dst2, &fl))
+               goto relookup_failed;
+-      err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP);
++      err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP);
+       switch (err) {
+       case 0:
+               dst_release(dst);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/inet6_hashtables.c linux-2.6.29-rc3.owrt/net/ipv6/inet6_hashtables.c
+--- linux-2.6.29.owrt/net/ipv6/inet6_hashtables.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/inet6_hashtables.c  2009-05-10 23:48:34.000000000 +0200
+@@ -258,11 +258,11 @@
+       if (twp != NULL) {
+               *twp = tw;
+-              NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
++              NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+       } else if (tw != NULL) {
+               /* Silly. Should hash-dance instead... */
+               inet_twsk_deschedule(tw, death_row);
+-              NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
++              NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+               inet_twsk_put(tw);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/ip6_flowlabel.c linux-2.6.29-rc3.owrt/net/ipv6/ip6_flowlabel.c
+--- linux-2.6.29.owrt/net/ipv6/ip6_flowlabel.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/ip6_flowlabel.c     2009-05-10 23:48:34.000000000 +0200
+@@ -323,21 +323,17 @@
+ fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
+         int optlen, int *err_p)
+ {
+-      struct ip6_flowlabel *fl = NULL;
++      struct ip6_flowlabel *fl;
+       int olen;
+       int addr_type;
+       int err;
+-      olen = optlen - CMSG_ALIGN(sizeof(*freq));
+-      err = -EINVAL;
+-      if (olen > 64 * 1024)
+-              goto done;
+-
+       err = -ENOMEM;
+       fl = kzalloc(sizeof(*fl), GFP_KERNEL);
+       if (fl == NULL)
+               goto done;
++      olen = optlen - CMSG_ALIGN(sizeof(*freq));
+       if (olen > 0) {
+               struct msghdr msg;
+               struct flowi flowi;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/ip6_input.c linux-2.6.29-rc3.owrt/net/ipv6/ip6_input.c
+--- linux-2.6.29.owrt/net/ipv6/ip6_input.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/ip6_input.c 2009-05-10 23:48:34.000000000 +0200
+@@ -255,7 +255,6 @@
+        *      IPv6 multicast router mode is now supported ;)
+        */
+       if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
+-          !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
+           likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
+               /*
+                * Okay, we try to forward - split and duplicate
+@@ -317,6 +316,7 @@
+               }
+               if (skb2) {
++                      skb2->dev = skb2->dst->dev;
+                       ip6_mr_input(skb2);
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/ip6mr.c linux-2.6.29-rc3.owrt/net/ipv6/ip6mr.c
+--- linux-2.6.29.owrt/net/ipv6/ip6mr.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/ip6mr.c     2009-05-10 23:48:34.000000000 +0200
+@@ -48,7 +48,6 @@
+ #include <linux/pim.h>
+ #include <net/addrconf.h>
+ #include <linux/netfilter_ipv6.h>
+-#include <net/ip6_checksum.h>
+ /* Big lock, protecting vif table, mrt cache and mroute socket state.
+    Note that the changes are semaphored via rtnl_lock.
+@@ -366,9 +365,7 @@
+       pim = (struct pimreghdr *)skb_transport_header(skb);
+       if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) ||
+           (pim->flags & PIM_NULL_REGISTER) ||
+-          (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
+-                           sizeof(*pim), IPPROTO_PIM,
+-                           csum_partial((void *)pim, sizeof(*pim), 0)) &&
++          (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 &&
+            csum_fold(skb_checksum(skb, 0, skb->len, 0))))
+               goto drop;
+@@ -395,7 +392,7 @@
+       skb_pull(skb, (u8 *)encap - skb->data);
+       skb_reset_network_header(skb);
+       skb->dev = reg_dev;
+-      skb->protocol = htons(ETH_P_IPV6);
++      skb->protocol = htons(ETH_P_IP);
+       skb->ip_summed = 0;
+       skb->pkt_type = PACKET_HOST;
+       dst_release(skb->dst);
+@@ -484,7 +481,6 @@
+ {
+       struct mif_device *v;
+       struct net_device *dev;
+-      struct inet6_dev *in6_dev;
+       if (vifi < 0 || vifi >= net->ipv6.maxvif)
+               return -EADDRNOTAVAIL;
+@@ -517,10 +513,6 @@
+       dev_set_allmulti(dev, -1);
+-      in6_dev = __in6_dev_get(dev);
+-      if (in6_dev)
+-              in6_dev->cnf.mc_forwarding--;
+-
+       if (v->flags & MIFF_REGISTER)
+               unregister_netdevice(dev);
+@@ -630,7 +622,6 @@
+       int vifi = vifc->mif6c_mifi;
+       struct mif_device *v = &net->ipv6.vif6_table[vifi];
+       struct net_device *dev;
+-      struct inet6_dev *in6_dev;
+       int err;
+       /* Is vif busy ? */
+@@ -671,10 +662,6 @@
+               return -EINVAL;
+       }
+-      in6_dev = __in6_dev_get(dev);
+-      if (in6_dev)
+-              in6_dev->cnf.mc_forwarding++;
+-
+       /*
+        *      Fill in the VIF structures
+        */
+@@ -851,6 +838,8 @@
+       skb->dst = dst_clone(pkt->dst);
+       skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++      skb_pull(skb, sizeof(struct ipv6hdr));
+       }
+       if (net->ipv6.mroute6_sk == NULL) {
+@@ -1233,10 +1222,8 @@
+       rtnl_lock();
+       write_lock_bh(&mrt_lock);
+-      if (likely(net->ipv6.mroute6_sk == NULL)) {
++      if (likely(net->ipv6.mroute6_sk == NULL))
+               net->ipv6.mroute6_sk = sk;
+-              net->ipv6.devconf_all->mc_forwarding++;
+-      }
+       else
+               err = -EADDRINUSE;
+       write_unlock_bh(&mrt_lock);
+@@ -1255,7 +1242,6 @@
+       if (sk == net->ipv6.mroute6_sk) {
+               write_lock_bh(&mrt_lock);
+               net->ipv6.mroute6_sk = NULL;
+-              net->ipv6.devconf_all->mc_forwarding--;
+               write_unlock_bh(&mrt_lock);
+               mroute_clean_tables(net);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/ip6_output.c linux-2.6.29-rc3.owrt/net/ipv6/ip6_output.c
+--- linux-2.6.29.owrt/net/ipv6/ip6_output.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/ip6_output.c        2009-05-10 23:48:34.000000000 +0200
+@@ -1105,18 +1105,6 @@
+       return err;
+ }
+-static inline struct ipv6_opt_hdr *ip6_opt_dup(struct ipv6_opt_hdr *src,
+-                                             gfp_t gfp)
+-{
+-      return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
+-}
+-
+-static inline struct ipv6_rt_hdr *ip6_rthdr_dup(struct ipv6_rt_hdr *src,
+-                                              gfp_t gfp)
+-{
+-      return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
+-}
+-
+ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
+       int offset, int len, int odd, struct sk_buff *skb),
+       void *from, int length, int transhdrlen,
+@@ -1142,37 +1130,17 @@
+                * setup for corking
+                */
+               if (opt) {
+-                      if (WARN_ON(np->cork.opt))
++                      if (np->cork.opt == NULL) {
++                              np->cork.opt = kmalloc(opt->tot_len,
++                                                     sk->sk_allocation);
++                              if (unlikely(np->cork.opt == NULL))
++                                      return -ENOBUFS;
++                      } else if (np->cork.opt->tot_len < opt->tot_len) {
++                              printk(KERN_DEBUG "ip6_append_data: invalid option length\n");
+                               return -EINVAL;
+-
+-                      np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation);
+-                      if (unlikely(np->cork.opt == NULL))
+-                              return -ENOBUFS;
+-
+-                      np->cork.opt->tot_len = opt->tot_len;
+-                      np->cork.opt->opt_flen = opt->opt_flen;
+-                      np->cork.opt->opt_nflen = opt->opt_nflen;
+-
+-                      np->cork.opt->dst0opt = ip6_opt_dup(opt->dst0opt,
+-                                                          sk->sk_allocation);
+-                      if (opt->dst0opt && !np->cork.opt->dst0opt)
+-                              return -ENOBUFS;
+-
+-                      np->cork.opt->dst1opt = ip6_opt_dup(opt->dst1opt,
+-                                                          sk->sk_allocation);
+-                      if (opt->dst1opt && !np->cork.opt->dst1opt)
+-                              return -ENOBUFS;
+-
+-                      np->cork.opt->hopopt = ip6_opt_dup(opt->hopopt,
+-                                                         sk->sk_allocation);
+-                      if (opt->hopopt && !np->cork.opt->hopopt)
+-                              return -ENOBUFS;
+-
+-                      np->cork.opt->srcrt = ip6_rthdr_dup(opt->srcrt,
+-                                                          sk->sk_allocation);
+-                      if (opt->srcrt && !np->cork.opt->srcrt)
+-                              return -ENOBUFS;
+-
++                      }
++                      memcpy(np->cork.opt, opt, opt->tot_len);
++                      inet->cork.flags |= IPCORK_OPT;
+                       /* need source address above miyazawa*/
+               }
+               dst_hold(&rt->u.dst);
+@@ -1199,7 +1167,8 @@
+       } else {
+               rt = (struct rt6_info *)inet->cork.dst;
+               fl = &inet->cork.fl;
+-              opt = np->cork.opt;
++              if (inet->cork.flags & IPCORK_OPT)
++                      opt = np->cork.opt;
+               transhdrlen = 0;
+               exthdrlen = 0;
+               mtu = inet->cork.fragsize;
+@@ -1438,15 +1407,9 @@
+ static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
+ {
+-      if (np->cork.opt) {
+-              kfree(np->cork.opt->dst0opt);
+-              kfree(np->cork.opt->dst1opt);
+-              kfree(np->cork.opt->hopopt);
+-              kfree(np->cork.opt->srcrt);
+-              kfree(np->cork.opt);
+-              np->cork.opt = NULL;
+-      }
+-
++      inet->cork.flags &= ~IPCORK_OPT;
++      kfree(np->cork.opt);
++      np->cork.opt = NULL;
+       if (inet->cork.dst) {
+               dst_release(inet->cork.dst);
+               inet->cork.dst = NULL;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/ip6_tunnel.c linux-2.6.29-rc3.owrt/net/ipv6/ip6_tunnel.c
+--- linux-2.6.29.owrt/net/ipv6/ip6_tunnel.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/ip6_tunnel.c        2009-05-10 23:48:34.000000000 +0200
+@@ -249,8 +249,8 @@
+       }
+       t = netdev_priv(dev);
+-      t->parms = *p;
+       ip6_tnl_dev_init(dev);
++      t->parms = *p;
+       if ((err = register_netdevice(dev)) < 0)
+               goto failed_free;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c linux-2.6.29-rc3.owrt/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+--- linux-2.6.29.owrt/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c       2009-05-10 23:48:34.000000000 +0200
+@@ -49,19 +49,8 @@
+ static const u_int8_t invmap[] = {
+       [ICMPV6_ECHO_REQUEST - 128]     = ICMPV6_ECHO_REPLY + 1,
+       [ICMPV6_ECHO_REPLY - 128]       = ICMPV6_ECHO_REQUEST + 1,
+-      [ICMPV6_NI_QUERY - 128]         = ICMPV6_NI_REPLY + 1,
+-      [ICMPV6_NI_REPLY - 128]         = ICMPV6_NI_QUERY +1
+-};
+-
+-static const u_int8_t noct_valid_new[] = {
+-      [ICMPV6_MGM_QUERY - 130] = 1,
+-      [ICMPV6_MGM_REPORT -130] = 1,
+-      [ICMPV6_MGM_REDUCTION - 130] = 1,
+-      [NDISC_ROUTER_SOLICITATION - 130] = 1,
+-      [NDISC_ROUTER_ADVERTISEMENT - 130] = 1,
+-      [NDISC_NEIGHBOUR_SOLICITATION - 130] = 1,
+-      [NDISC_NEIGHBOUR_ADVERTISEMENT - 130] = 1,
+-      [ICMPV6_MLD2_REPORT - 130] = 1
++      [ICMPV6_NI_QUERY - 128]         = ICMPV6_NI_QUERY + 1,
++      [ICMPV6_NI_REPLY - 128]         = ICMPV6_NI_REPLY +1
+ };
+ static bool icmpv6_invert_tuple(struct nf_conntrack_tuple *tuple,
+@@ -189,7 +178,6 @@
+ {
+       const struct icmp6hdr *icmp6h;
+       struct icmp6hdr _ih;
+-      int type;
+       icmp6h = skb_header_pointer(skb, dataoff, sizeof(_ih), &_ih);
+       if (icmp6h == NULL) {
+@@ -201,21 +189,11 @@
+       if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING &&
+           nf_ip6_checksum(skb, hooknum, dataoff, IPPROTO_ICMPV6)) {
+-              if (LOG_INVALID(net, IPPROTO_ICMPV6))
+-                      nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
+-                                    "nf_ct_icmpv6: ICMPv6 checksum failed ");
++              nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
++                            "nf_ct_icmpv6: ICMPv6 checksum failed\n");
+               return -NF_ACCEPT;
+       }
+-      type = icmp6h->icmp6_type - 130;
+-      if (type >= 0 && type < sizeof(noct_valid_new) &&
+-          noct_valid_new[type]) {
+-              skb->nfct = &nf_conntrack_untracked.ct_general;
+-              skb->nfctinfo = IP_CT_NEW;
+-              nf_conntrack_get(skb->nfct);
+-              return NF_ACCEPT;
+-      }
+-
+       /* is not error message ? */
+       if (icmp6h->icmp6_type >= 128)
+               return NF_ACCEPT;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/netfilter/nf_conntrack_reasm.c linux-2.6.29-rc3.owrt/net/ipv6/netfilter/nf_conntrack_reasm.c
+--- linux-2.6.29.owrt/net/ipv6/netfilter/nf_conntrack_reasm.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/netfilter/nf_conntrack_reasm.c      2009-05-10 23:48:34.000000000 +0200
+@@ -528,14 +528,14 @@
+               if (!ipv6_ext_hdr(nexthdr)) {
+                       return -1;
+               }
+-              if (nexthdr == NEXTHDR_NONE) {
+-                      pr_debug("next header is none\n");
+-                      return -1;
+-              }
+               if (len < (int)sizeof(struct ipv6_opt_hdr)) {
+                       pr_debug("too short\n");
+                       return -1;
+               }
++              if (nexthdr == NEXTHDR_NONE) {
++                      pr_debug("next header is none\n");
++                      return -1;
++              }
+               if (skb_copy_bits(skb, start, &hdr, sizeof(hdr)))
+                       BUG();
+               if (nexthdr == NEXTHDR_AUTH)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/reassembly.c linux-2.6.29-rc3.owrt/net/ipv6/reassembly.c
+--- linux-2.6.29.owrt/net/ipv6/reassembly.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/reassembly.c        2009-05-10 23:48:34.000000000 +0200
+@@ -452,7 +452,6 @@
+ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
+                         struct net_device *dev)
+ {
+-      struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
+       struct sk_buff *fp, *head = fq->q.fragments;
+       int    payload_len;
+       unsigned int nhoff;
+@@ -552,7 +551,8 @@
+                                         head->csum);
+       rcu_read_lock();
+-      IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
++      IP6_INC_STATS_BH(dev_net(dev),
++                       __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
+       rcu_read_unlock();
+       fq->q.fragments = NULL;
+       return 1;
+@@ -566,7 +566,8 @@
+               printk(KERN_DEBUG "ip6_frag_reasm: no memory for reassembly\n");
+ out_fail:
+       rcu_read_lock();
+-      IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
++      IP6_INC_STATS_BH(dev_net(dev),
++                       __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
+       rcu_read_unlock();
+       return -1;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/route.c linux-2.6.29-rc3.owrt/net/ipv6/route.c
+--- linux-2.6.29.owrt/net/ipv6/route.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/route.c     2009-05-10 23:48:34.000000000 +0200
+@@ -794,7 +794,7 @@
+               .proto = iph->nexthdr,
+       };
+-      if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG)
++      if (rt6_need_strict(&iph->daddr))
+               flags |= RT6_LOOKUP_F_IFACE;
+       skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/ipv6/sit.c linux-2.6.29-rc3.owrt/net/ipv6/sit.c
+--- linux-2.6.29.owrt/net/ipv6/sit.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/ipv6/sit.c       2009-05-10 23:48:34.000000000 +0200
+@@ -188,9 +188,9 @@
+       }
+       nt = netdev_priv(dev);
++      ipip6_tunnel_init(dev);
+       nt->parms = *parms;
+-      ipip6_tunnel_init(dev);
+       if (parms->i_flags & SIT_ISATAP)
+               dev->priv_flags |= IFF_ISATAP;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/mac80211/tx.c linux-2.6.29-rc3.owrt/net/mac80211/tx.c
+--- linux-2.6.29.owrt/net/mac80211/tx.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/mac80211/tx.c    2009-05-10 23:48:34.000000000 +0200
+@@ -752,8 +752,6 @@
+               skb_copy_queue_mapping(frag, first);
+               frag->do_not_encrypt = first->do_not_encrypt;
+-              frag->dev = first->dev;
+-              frag->iif = first->iif;
+               pos += copylen;
+               left -= copylen;
+@@ -1345,8 +1343,6 @@
+                                               list) {
+                               if (!netif_running(sdata->dev))
+                                       continue;
+-                              if (sdata->vif.type != NL80211_IFTYPE_AP)
+-                                      continue;
+                               if (compare_ether_addr(sdata->dev->dev_addr,
+                                                      hdr->addr2)) {
+                                       dev_hold(sdata->dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/nf_conntrack_core.c linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_core.c
+--- linux-2.6.29.owrt/net/netfilter/nf_conntrack_core.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_core.c    2009-05-10 23:48:34.000000000 +0200
+@@ -734,7 +734,7 @@
+       NF_CT_ASSERT(skb->nfct);
+       ret = l4proto->packet(ct, skb, dataoff, ctinfo, pf, hooknum);
+-      if (ret <= 0) {
++      if (ret < 0) {
+               /* Invalid: inverse of the return code tells
+                * the netfilter core what to do */
+               pr_debug("nf_conntrack_in: Can't track with proto module\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/nf_conntrack_netlink.c linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_netlink.c
+--- linux-2.6.29.owrt/net/netfilter/nf_conntrack_netlink.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_netlink.c 2009-05-10 23:48:34.000000000 +0200
+@@ -434,7 +434,7 @@
+       } else
+               return NOTIFY_DONE;
+-      if (!item->report && !nfnetlink_has_listeners(group))
++      if (!nfnetlink_has_listeners(group))
+               return NOTIFY_DONE;
+       skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
+@@ -1215,16 +1215,6 @@
+               }
+       }
+-#ifdef CONFIG_NF_NAT_NEEDED
+-      if (cda[CTA_NAT_SEQ_ADJ_ORIG] || cda[CTA_NAT_SEQ_ADJ_REPLY]) {
+-              err = ctnetlink_change_nat_seq_adj(ct, cda);
+-              if (err < 0) {
+-                      rcu_read_unlock();
+-                      goto err;
+-              }
+-      }
+-#endif
+-
+       if (cda[CTA_PROTOINFO]) {
+               err = ctnetlink_change_protoinfo(ct, cda);
+               if (err < 0) {
+@@ -1502,8 +1492,7 @@
+       } else
+               return NOTIFY_DONE;
+-      if (!item->report &&
+-          !nfnetlink_has_listeners(NFNLGRP_CONNTRACK_EXP_NEW))
++      if (!nfnetlink_has_listeners(NFNLGRP_CONNTRACK_EXP_NEW))
+               return NOTIFY_DONE;
+       skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
+@@ -1780,7 +1769,6 @@
+               goto out;
+       }
+-      exp->class = 0;
+       exp->expectfn = NULL;
+       exp->flags = 0;
+       exp->master = ct;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/nf_conntrack_proto_tcp.c linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_proto_tcp.c
+--- linux-2.6.29.owrt/net/netfilter/nf_conntrack_proto_tcp.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/nf_conntrack_proto_tcp.c       2009-05-10 23:48:34.000000000 +0200
+@@ -859,7 +859,7 @@
+                        */
+                       if (nf_ct_kill(ct))
+                               return -NF_REPEAT;
+-                      return NF_DROP;
++                      return -NF_DROP;
+               }
+               /* Fall through */
+       case TCP_CONNTRACK_IGNORE:
+@@ -892,7 +892,7 @@
+                               nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
+                                         "nf_ct_tcp: killing out of sync session ");
+                       nf_ct_kill(ct);
+-                      return NF_DROP;
++                      return -NF_DROP;
+               }
+               ct->proto.tcp.last_index = index;
+               ct->proto.tcp.last_dir = dir;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/nfnetlink_log.c linux-2.6.29-rc3.owrt/net/netfilter/nfnetlink_log.c
+--- linux-2.6.29.owrt/net/netfilter/nfnetlink_log.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/nfnetlink_log.c        2009-05-10 23:48:34.000000000 +0200
+@@ -39,7 +39,7 @@
+ #endif
+ #define NFULNL_NLBUFSIZ_DEFAULT       NLMSG_GOODSIZE
+-#define NFULNL_TIMEOUT_DEFAULT        100     /* every second */
++#define NFULNL_TIMEOUT_DEFAULT        HZ      /* every second */
+ #define NFULNL_QTHRESH_DEFAULT        100     /* 100 packets */
+ #define NFULNL_COPY_RANGE_MAX 0xFFFF  /* max packet size is limited by 16-bit struct nfattr nfa_len field */
+@@ -590,10 +590,8 @@
+       qthreshold = inst->qthreshold;
+       /* per-rule qthreshold overrides per-instance */
+-      if (li->u.ulog.qthreshold)
+-              if (qthreshold > li->u.ulog.qthreshold)
+-                      qthreshold = li->u.ulog.qthreshold;
+-
++      if (qthreshold > li->u.ulog.qthreshold)
++              qthreshold = li->u.ulog.qthreshold;
+       switch (inst->copy_mode) {
+       case NFULNL_COPY_META:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/x_tables.c linux-2.6.29-rc3.owrt/net/netfilter/x_tables.c
+--- linux-2.6.29.owrt/net/netfilter/x_tables.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/x_tables.c     2009-05-10 23:48:34.000000000 +0200
+@@ -827,143 +827,59 @@
+       .release = seq_release_net,
+ };
+-/*
+- * Traverse state for ip{,6}_{tables,matches} for helping crossing
+- * the multi-AF mutexes.
+- */
+-struct nf_mttg_trav {
+-      struct list_head *head, *curr;
+-      uint8_t class, nfproto;
+-};
+-
+-enum {
+-      MTTG_TRAV_INIT,
+-      MTTG_TRAV_NFP_UNSPEC,
+-      MTTG_TRAV_NFP_SPEC,
+-      MTTG_TRAV_DONE,
+-};
+-
+-static void *xt_mttg_seq_next(struct seq_file *seq, void *v, loff_t *ppos,
+-    bool is_target)
+-{
+-      static const uint8_t next_class[] = {
+-              [MTTG_TRAV_NFP_UNSPEC] = MTTG_TRAV_NFP_SPEC,
+-              [MTTG_TRAV_NFP_SPEC]   = MTTG_TRAV_DONE,
+-      };
+-      struct nf_mttg_trav *trav = seq->private;
+-
+-      switch (trav->class) {
+-      case MTTG_TRAV_INIT:
+-              trav->class = MTTG_TRAV_NFP_UNSPEC;
+-              mutex_lock(&xt[NFPROTO_UNSPEC].mutex);
+-              trav->head = trav->curr = is_target ?
+-                      &xt[NFPROTO_UNSPEC].target : &xt[NFPROTO_UNSPEC].match;
+-              break;
+-      case MTTG_TRAV_NFP_UNSPEC:
+-              trav->curr = trav->curr->next;
+-              if (trav->curr != trav->head)
+-                      break;
+-              mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+-              mutex_lock(&xt[trav->nfproto].mutex);
+-              trav->head = trav->curr = is_target ?
+-                      &xt[trav->nfproto].target : &xt[trav->nfproto].match;
+-              trav->class = next_class[trav->class];
+-              break;
+-      case MTTG_TRAV_NFP_SPEC:
+-              trav->curr = trav->curr->next;
+-              if (trav->curr != trav->head)
+-                      break;
+-              /* fallthru, _stop will unlock */
+-      default:
+-              return NULL;
+-      }
+-
+-      if (ppos != NULL)
+-              ++*ppos;
+-      return trav;
+-}
+-
+-static void *xt_mttg_seq_start(struct seq_file *seq, loff_t *pos,
+-    bool is_target)
++static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+ {
+-      struct nf_mttg_trav *trav = seq->private;
+-      unsigned int j;
++      struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
++      u_int16_t af = (unsigned long)pde->data;
+-      trav->class = MTTG_TRAV_INIT;
+-      for (j = 0; j < *pos; ++j)
+-              if (xt_mttg_seq_next(seq, NULL, NULL, is_target) == NULL)
+-                      return NULL;
+-      return trav;
++      mutex_lock(&xt[af].mutex);
++      return seq_list_start(&xt[af].match, *pos);
+ }
+-static void xt_mttg_seq_stop(struct seq_file *seq, void *v)
++static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+ {
+-      struct nf_mttg_trav *trav = seq->private;
++      struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
++      u_int16_t af = (unsigned long)pde->data;
+-      switch (trav->class) {
+-      case MTTG_TRAV_NFP_UNSPEC:
+-              mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+-              break;
+-      case MTTG_TRAV_NFP_SPEC:
+-              mutex_unlock(&xt[trav->nfproto].mutex);
+-              break;
+-      }
++      return seq_list_next(v, &xt[af].match, pos);
+ }
+-static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
++static void xt_match_seq_stop(struct seq_file *seq, void *v)
+ {
+-      return xt_mttg_seq_start(seq, pos, false);
+-}
++      struct proc_dir_entry *pde = seq->private;
++      u_int16_t af = (unsigned long)pde->data;
+-static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
+-{
+-      return xt_mttg_seq_next(seq, v, ppos, false);
++      mutex_unlock(&xt[af].mutex);
+ }
+ static int xt_match_seq_show(struct seq_file *seq, void *v)
+ {
+-      const struct nf_mttg_trav *trav = seq->private;
+-      const struct xt_match *match;
++      struct xt_match *match = list_entry(v, struct xt_match, list);
+-      switch (trav->class) {
+-      case MTTG_TRAV_NFP_UNSPEC:
+-      case MTTG_TRAV_NFP_SPEC:
+-              if (trav->curr == trav->head)
+-                      return 0;
+-              match = list_entry(trav->curr, struct xt_match, list);
+-              return (*match->name == '\0') ? 0 :
+-                     seq_printf(seq, "%s\n", match->name);
+-      }
+-      return 0;
++      if (strlen(match->name))
++              return seq_printf(seq, "%s\n", match->name);
++      else
++              return 0;
+ }
+ static const struct seq_operations xt_match_seq_ops = {
+       .start  = xt_match_seq_start,
+       .next   = xt_match_seq_next,
+-      .stop   = xt_mttg_seq_stop,
++      .stop   = xt_match_seq_stop,
+       .show   = xt_match_seq_show,
+ };
+ static int xt_match_open(struct inode *inode, struct file *file)
+ {
+-      struct seq_file *seq;
+-      struct nf_mttg_trav *trav;
+       int ret;
+-      trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+-      if (trav == NULL)
+-              return -ENOMEM;
+-
+       ret = seq_open(file, &xt_match_seq_ops);
+-      if (ret < 0) {
+-              kfree(trav);
+-              return ret;
+-      }
++      if (!ret) {
++              struct seq_file *seq = file->private_data;
+-      seq = file->private_data;
+-      seq->private = trav;
+-      trav->nfproto = (unsigned long)PDE(inode)->data;
+-      return 0;
++              seq->private = PDE(inode);
++      }
++      return ret;
+ }
+ static const struct file_operations xt_match_ops = {
+@@ -971,63 +887,62 @@
+       .open    = xt_match_open,
+       .read    = seq_read,
+       .llseek  = seq_lseek,
+-      .release = seq_release_private,
++      .release = seq_release,
+ };
+ static void *xt_target_seq_start(struct seq_file *seq, loff_t *pos)
+ {
+-      return xt_mttg_seq_start(seq, pos, true);
++      struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
++      u_int16_t af = (unsigned long)pde->data;
++
++      mutex_lock(&xt[af].mutex);
++      return seq_list_start(&xt[af].target, *pos);
+ }
+-static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
++static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+ {
+-      return xt_mttg_seq_next(seq, v, ppos, true);
++      struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
++      u_int16_t af = (unsigned long)pde->data;
++
++      return seq_list_next(v, &xt[af].target, pos);
++}
++
++static void xt_target_seq_stop(struct seq_file *seq, void *v)
++{
++      struct proc_dir_entry *pde = seq->private;
++      u_int16_t af = (unsigned long)pde->data;
++
++      mutex_unlock(&xt[af].mutex);
+ }
+ static int xt_target_seq_show(struct seq_file *seq, void *v)
+ {
+-      const struct nf_mttg_trav *trav = seq->private;
+-      const struct xt_target *target;
++      struct xt_target *target = list_entry(v, struct xt_target, list);
+-      switch (trav->class) {
+-      case MTTG_TRAV_NFP_UNSPEC:
+-      case MTTG_TRAV_NFP_SPEC:
+-              if (trav->curr == trav->head)
+-                      return 0;
+-              target = list_entry(trav->curr, struct xt_target, list);
+-              return (*target->name == '\0') ? 0 :
+-                     seq_printf(seq, "%s\n", target->name);
+-      }
+-      return 0;
++      if (strlen(target->name))
++              return seq_printf(seq, "%s\n", target->name);
++      else
++              return 0;
+ }
+ static const struct seq_operations xt_target_seq_ops = {
+       .start  = xt_target_seq_start,
+       .next   = xt_target_seq_next,
+-      .stop   = xt_mttg_seq_stop,
++      .stop   = xt_target_seq_stop,
+       .show   = xt_target_seq_show,
+ };
+ static int xt_target_open(struct inode *inode, struct file *file)
+ {
+-      struct seq_file *seq;
+-      struct nf_mttg_trav *trav;
+       int ret;
+-      trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+-      if (trav == NULL)
+-              return -ENOMEM;
+-
+       ret = seq_open(file, &xt_target_seq_ops);
+-      if (ret < 0) {
+-              kfree(trav);
+-              return ret;
+-      }
++      if (!ret) {
++              struct seq_file *seq = file->private_data;
+-      seq = file->private_data;
+-      seq->private = trav;
+-      trav->nfproto = (unsigned long)PDE(inode)->data;
+-      return 0;
++              seq->private = PDE(inode);
++      }
++      return ret;
+ }
+ static const struct file_operations xt_target_ops = {
+@@ -1035,7 +950,7 @@
+       .open    = xt_target_open,
+       .read    = seq_read,
+       .llseek  = seq_lseek,
+-      .release = seq_release_private,
++      .release = seq_release,
+ };
+ #define FORMAT_TABLES "_tables_names"
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/xt_recent.c linux-2.6.29-rc3.owrt/net/netfilter/xt_recent.c
+--- linux-2.6.29.owrt/net/netfilter/xt_recent.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/xt_recent.c    2009-05-10 23:48:34.000000000 +0200
+@@ -542,7 +542,7 @@
+       struct recent_entry *e;
+       char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")];
+       const char *c = buf;
+-      union nf_inet_addr addr = {};
++      union nf_inet_addr addr;
+       u_int16_t family;
+       bool add, succ;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netfilter/xt_sctp.c linux-2.6.29-rc3.owrt/net/netfilter/xt_sctp.c
+--- linux-2.6.29.owrt/net/netfilter/xt_sctp.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netfilter/xt_sctp.c      2009-05-10 23:48:34.000000000 +0200
+@@ -105,7 +105,7 @@
+       switch (chunk_match_type) {
+       case SCTP_CHUNK_MATCH_ALL:
+-              return SCTP_CHUNKMAP_IS_CLEAR(chunkmapcopy);
++              return SCTP_CHUNKMAP_IS_CLEAR(info->chunkmap);
+       case SCTP_CHUNK_MATCH_ANY:
+               return false;
+       case SCTP_CHUNK_MATCH_ONLY:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/netlink/af_netlink.c linux-2.6.29-rc3.owrt/net/netlink/af_netlink.c
+--- linux-2.6.29.owrt/net/netlink/af_netlink.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/netlink/af_netlink.c     2009-05-10 23:48:34.000000000 +0200
+@@ -1084,13 +1084,6 @@
+       return 0;
+ }
+-/**
+- * netlink_set_err - report error to broadcast listeners
+- * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+- * @pid: the PID of a process that we want to skip (if any)
+- * @groups: the broadcast group that will notice the error
+- * @code: error code, must be negative (as usual in kernelspace)
+- */
+ void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
+ {
+       struct netlink_set_err_data info;
+@@ -1100,8 +1093,7 @@
+       info.exclude_sk = ssk;
+       info.pid = pid;
+       info.group = group;
+-      /* sk->sk_err wants a positive error value */
+-      info.code = -code;
++      info.code = code;
+       read_lock(&nl_table_lock);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/packet/af_packet.c linux-2.6.29-rc3.owrt/net/packet/af_packet.c
+--- linux-2.6.29.owrt/net/packet/af_packet.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/packet/af_packet.c       2009-05-10 23:48:34.000000000 +0200
+@@ -77,7 +77,6 @@
+ #include <linux/poll.h>
+ #include <linux/module.h>
+ #include <linux/init.h>
+-#include <linux/mutex.h>
+ #ifdef CONFIG_INET
+ #include <net/inet_common.h>
+@@ -176,7 +175,6 @@
+ #endif
+       struct packet_type      prot_hook;
+       spinlock_t              bind_lock;
+-      struct mutex            pg_vec_lock;
+       unsigned int            running:1,      /* prot_hook is attached*/
+                               auxdata:1,
+                               origdev:1;
+@@ -223,13 +221,13 @@
+       h.raw = po->pg_vec[pg_vec_pos] + (frame_offset * po->frame_size);
+       switch (po->tp_version) {
+       case TPACKET_V1:
+-              if (status != (h.h1->tp_status ? TP_STATUS_USER :
+-                                              TP_STATUS_KERNEL))
++              if (status != h.h1->tp_status ? TP_STATUS_USER :
++                                              TP_STATUS_KERNEL)
+                       return NULL;
+               break;
+       case TPACKET_V2:
+-              if (status != (h.h2->tp_status ? TP_STATUS_USER :
+-                                              TP_STATUS_KERNEL))
++              if (status != h.h2->tp_status ? TP_STATUS_USER :
++                                              TP_STATUS_KERNEL)
+                       return NULL;
+               break;
+       }
+@@ -1074,7 +1072,6 @@
+        */
+       spin_lock_init(&po->bind_lock);
+-      mutex_init(&po->pg_vec_lock);
+       po->prot_hook.func = packet_rcv;
+       po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+@@ -1889,7 +1886,6 @@
+       synchronize_net();
+       err = -EBUSY;
+-      mutex_lock(&po->pg_vec_lock);
+       if (closing || atomic_read(&po->mapped) == 0) {
+               err = 0;
+ #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
+@@ -1911,7 +1907,6 @@
+               if (atomic_read(&po->mapped))
+                       printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped));
+       }
+-      mutex_unlock(&po->pg_vec_lock);
+       spin_lock(&po->bind_lock);
+       if (was_running && !po->running) {
+@@ -1944,7 +1939,7 @@
+       size = vma->vm_end - vma->vm_start;
+-      mutex_lock(&po->pg_vec_lock);
++      lock_sock(sk);
+       if (po->pg_vec == NULL)
+               goto out;
+       if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE)
+@@ -1967,7 +1962,7 @@
+       err = 0;
+ out:
+-      mutex_unlock(&po->pg_vec_lock);
++      release_sock(sk);
+       return err;
+ }
+ #endif
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/phonet/pep.c linux-2.6.29-rc3.owrt/net/phonet/pep.c
+--- linux-2.6.29.owrt/net/phonet/pep.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/phonet/pep.c     2009-05-10 23:48:34.000000000 +0200
+@@ -553,7 +553,7 @@
+ {
+       struct pep_sock *pn = pep_sk(sk);
+       struct sock *sknode;
+-      struct pnpipehdr *hdr;
++      struct pnpipehdr *hdr = pnp_hdr(skb);
+       struct sockaddr_pn dst;
+       int err = NET_RX_SUCCESS;
+       u8 pipe_handle;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/phonet/pep-gprs.c linux-2.6.29-rc3.owrt/net/phonet/pep-gprs.c
+--- linux-2.6.29.owrt/net/phonet/pep-gprs.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/phonet/pep-gprs.c        2009-05-10 23:48:34.000000000 +0200
+@@ -207,6 +207,7 @@
+                               dev->name, err);
+               dev->stats.tx_aborted_errors++;
+               dev->stats.tx_errors++;
++              dev_kfree_skb(skb);
+       } else {
+               dev->stats.tx_packets++;
+               dev->stats.tx_bytes += len;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/rxrpc/af_rxrpc.c linux-2.6.29-rc3.owrt/net/rxrpc/af_rxrpc.c
+--- linux-2.6.29.owrt/net/rxrpc/af_rxrpc.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/rxrpc/af_rxrpc.c 2009-05-10 23:48:34.000000000 +0200
+@@ -284,13 +284,13 @@
+               if (IS_ERR(trans)) {
+                       call = ERR_CAST(trans);
+                       trans = NULL;
+-                      goto out_notrans;
++                      goto out;
+               }
+       } else {
+               trans = rx->trans;
+               if (!trans) {
+                       call = ERR_PTR(-ENOTCONN);
+-                      goto out_notrans;
++                      goto out;
+               }
+               atomic_inc(&trans->usage);
+       }
+@@ -315,7 +315,6 @@
+       rxrpc_put_bundle(trans, bundle);
+ out:
+       rxrpc_put_transport(trans);
+-out_notrans:
+       release_sock(&rx->sk);
+       _leave(" = %p", call);
+       return call;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sched/act_police.c linux-2.6.29-rc3.owrt/net/sched/act_police.c
+--- linux-2.6.29.owrt/net/sched/act_police.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sched/act_police.c       2009-05-10 23:48:34.000000000 +0200
+@@ -183,6 +183,13 @@
+               if (R_tab == NULL)
+                       goto failure;
++              if (!est && (ret == ACT_P_CREATED ||
++                           !gen_estimator_active(&police->tcf_bstats,
++                                                 &police->tcf_rate_est))) {
++                      err = -EINVAL;
++                      goto failure;
++              }
++
+               if (parm->peakrate.rate) {
+                       P_tab = qdisc_get_rtab(&parm->peakrate,
+                                              tb[TCA_POLICE_PEAKRATE]);
+@@ -198,12 +205,6 @@
+                                           &police->tcf_lock, est);
+               if (err)
+                       goto failure_unlock;
+-      } else if (tb[TCA_POLICE_AVRATE] &&
+-                 (ret == ACT_P_CREATED ||
+-                  !gen_estimator_active(&police->tcf_bstats,
+-                                        &police->tcf_rate_est))) {
+-              err = -EINVAL;
+-              goto failure_unlock;
+       }
+       /* No failure allowed after this point */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sched/sch_drr.c linux-2.6.29-rc3.owrt/net/sched/sch_drr.c
+--- linux-2.6.29.owrt/net/sched/sch_drr.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sched/sch_drr.c  2009-05-10 23:48:34.000000000 +0200
+@@ -66,15 +66,11 @@
+ {
+       struct drr_sched *q = qdisc_priv(sch);
+       struct drr_class *cl = (struct drr_class *)*arg;
+-      struct nlattr *opt = tca[TCA_OPTIONS];
+       struct nlattr *tb[TCA_DRR_MAX + 1];
+       u32 quantum;
+       int err;
+-      if (!opt)
+-              return -EINVAL;
+-
+-      err = nla_parse_nested(tb, TCA_DRR_MAX, opt, drr_policy);
++      err = nla_parse_nested(tb, TCA_DRR_MAX, tca[TCA_OPTIONS], drr_policy);
+       if (err < 0)
+               return err;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sctp/endpointola.c linux-2.6.29-rc3.owrt/net/sctp/endpointola.c
+--- linux-2.6.29.owrt/net/sctp/endpointola.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sctp/endpointola.c       2009-05-10 23:48:34.000000000 +0200
+@@ -111,8 +111,7 @@
+               if (sctp_addip_enable) {
+                       auth_chunks->chunks[0] = SCTP_CID_ASCONF;
+                       auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
+-                      auth_chunks->param_hdr.length =
+-                                      htons(sizeof(sctp_paramhdr_t) + 2);
++                      auth_chunks->param_hdr.length += htons(2);
+               }
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sctp/protocol.c linux-2.6.29-rc3.owrt/net/sctp/protocol.c
+--- linux-2.6.29.owrt/net/sctp/protocol.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sctp/protocol.c  2009-05-10 23:48:34.000000000 +0200
+@@ -717,20 +717,15 @@
+ static int sctp_ctl_sock_init(void)
+ {
+       int err;
+-      sa_family_t family = PF_INET;
++      sa_family_t family;
+       if (sctp_get_pf_specific(PF_INET6))
+               family = PF_INET6;
++      else
++              family = PF_INET;
+       err = inet_ctl_sock_create(&sctp_ctl_sock, family,
+                                  SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+-
+-      /* If IPv6 socket could not be created, try the IPv4 socket */
+-      if (err < 0 && family == PF_INET6)
+-              err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+-                                         SOCK_SEQPACKET, IPPROTO_SCTP,
+-                                         &init_net);
+-
+       if (err < 0) {
+               printk(KERN_ERR
+                      "SCTP: Failed to create the SCTP control socket.\n");
+@@ -1327,8 +1322,9 @@
+ out:
+       return status;
+ err_v6_add_protocol:
+-      sctp_v4_del_protocol();
++      sctp_v6_del_protocol();
+ err_add_protocol:
++      sctp_v4_del_protocol();
+       inet_ctl_sock_destroy(sctp_ctl_sock);
+ err_ctl_sock_init:
+       sctp_v6_protosw_exit();
+@@ -1339,6 +1335,7 @@
+       sctp_v4_pf_exit();
+       sctp_v6_pf_exit();
+       sctp_sysctl_unregister();
++      list_del(&sctp_af_inet.list);
+       free_pages((unsigned long)sctp_port_hashtable,
+                  get_order(sctp_port_hashsize *
+                            sizeof(struct sctp_bind_hashbucket)));
+@@ -1386,6 +1383,7 @@
+       sctp_v4_pf_exit();
+       sctp_sysctl_unregister();
++      list_del(&sctp_af_inet.list);
+       free_pages((unsigned long)sctp_assoc_hashtable,
+                  get_order(sctp_assoc_hashsize *
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sctp/sm_sideeffect.c linux-2.6.29-rc3.owrt/net/sctp/sm_sideeffect.c
+--- linux-2.6.29.owrt/net/sctp/sm_sideeffect.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sctp/sm_sideeffect.c     2009-05-10 23:48:34.000000000 +0200
+@@ -787,48 +787,36 @@
+                                  struct sctp_association *asoc,
+                                  struct sctp_chunk *chunk)
+ {
++      struct sctp_operr_chunk *operr_chunk;
+       struct sctp_errhdr *err_hdr;
+-      struct sctp_ulpevent *ev;
+-
+-      while (chunk->chunk_end > chunk->skb->data) {
+-              err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
+-              ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+-                                                   GFP_ATOMIC);
+-              if (!ev)
+-                      return;
+-
+-              sctp_ulpq_tail_event(&asoc->ulpq, ev);
++      operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
++      err_hdr = &operr_chunk->err_hdr;
+-              switch (err_hdr->cause) {
+-              case SCTP_ERROR_UNKNOWN_CHUNK:
+-              {
+-                      sctp_chunkhdr_t *unk_chunk_hdr;
+-
+-                      unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+-                      switch (unk_chunk_hdr->type) {
+-                      /* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+-                       * an ERROR chunk reporting that it did not recognized
+-                       * the ASCONF chunk type, the sender of the ASCONF MUST
+-                       * NOT send any further ASCONF chunks and MUST stop its
+-                       * T-4 timer.
+-                       */
+-                      case SCTP_CID_ASCONF:
+-                              if (asoc->peer.asconf_capable == 0)
+-                                      break;
+-
+-                              asoc->peer.asconf_capable = 0;
+-                              sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
++      switch (err_hdr->cause) {
++      case SCTP_ERROR_UNKNOWN_CHUNK:
++      {
++              struct sctp_chunkhdr *unk_chunk_hdr;
++
++              unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
++              switch (unk_chunk_hdr->type) {
++              /* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
++               * ERROR chunk reporting that it did not recognized the ASCONF
++               * chunk type, the sender of the ASCONF MUST NOT send any
++               * further ASCONF chunks and MUST stop its T-4 timer.
++               */
++              case SCTP_CID_ASCONF:
++                      asoc->peer.asconf_capable = 0;
++                      sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+                                       SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+-                              break;
+-                      default:
+-                              break;
+-                      }
+                       break;
+-              }
+               default:
+                       break;
+               }
++              break;
++      }
++      default:
++              break;
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sctp/sm_statefuns.c linux-2.6.29-rc3.owrt/net/sctp/sm_statefuns.c
+--- linux-2.6.29.owrt/net/sctp/sm_statefuns.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sctp/sm_statefuns.c      2009-05-10 23:48:34.000000000 +0200
+@@ -3163,6 +3163,7 @@
+                                       sctp_cmd_seq_t *commands)
+ {
+       struct sctp_chunk *chunk = arg;
++      struct sctp_ulpevent *ev;
+       if (!sctp_vtag_verify(chunk, asoc))
+               return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+@@ -3172,10 +3173,21 @@
+               return sctp_sf_violation_chunklen(ep, asoc, type, arg,
+                                                 commands);
+-      sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+-                      SCTP_CHUNK(chunk));
++      while (chunk->chunk_end > chunk->skb->data) {
++              ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
++                                                   GFP_ATOMIC);
++              if (!ev)
++                      goto nomem;
++              sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
++                              SCTP_ULPEVENT(ev));
++              sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
++                              SCTP_CHUNK(chunk));
++      }
+       return SCTP_DISPOSITION_CONSUME;
++
++nomem:
++      return SCTP_DISPOSITION_NOMEM;
+ }
+ /*
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sunrpc/Kconfig linux-2.6.29-rc3.owrt/net/sunrpc/Kconfig
+--- linux-2.6.29.owrt/net/sunrpc/Kconfig       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sunrpc/Kconfig   2009-05-10 23:48:34.000000000 +0200
+@@ -6,7 +6,7 @@
+ config SUNRPC_XPRT_RDMA
+       tristate
+-      depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS && EXPERIMENTAL
++      depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+       default SUNRPC && INFINIBAND
+       help
+         This option allows the NFS client and server to support
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sunrpc/sched.c linux-2.6.29-rc3.owrt/net/sunrpc/sched.c
+--- linux-2.6.29.owrt/net/sunrpc/sched.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sunrpc/sched.c   2009-05-10 23:48:34.000000000 +0200
+@@ -293,6 +293,11 @@
+       rpc_clear_queued(task);
+       if (rpc_test_and_set_running(task))
+               return;
++      /* We might have raced */
++      if (RPC_IS_QUEUED(task)) {
++              rpc_clear_running(task);
++              return;
++      }
+       if (RPC_IS_ASYNC(task)) {
+               int status;
+@@ -602,9 +607,7 @@
+  */
+ static void __rpc_execute(struct rpc_task *task)
+ {
+-      struct rpc_wait_queue *queue;
+-      int task_is_async = RPC_IS_ASYNC(task);
+-      int status = 0;
++      int             status = 0;
+       dprintk("RPC: %5u __rpc_execute flags=0x%x\n",
+                       task->tk_pid, task->tk_flags);
+@@ -644,25 +647,15 @@
+                */
+               if (!RPC_IS_QUEUED(task))
+                       continue;
+-              /*
+-               * The queue->lock protects against races with
+-               * rpc_make_runnable().
+-               *
+-               * Note that once we clear RPC_TASK_RUNNING on an asynchronous
+-               * rpc_task, rpc_make_runnable() can assign it to a
+-               * different workqueue. We therefore cannot assume that the
+-               * rpc_task pointer may still be dereferenced.
+-               */
+-              queue = task->tk_waitqueue;
+-              spin_lock_bh(&queue->lock);
+-              if (!RPC_IS_QUEUED(task)) {
+-                      spin_unlock_bh(&queue->lock);
++              rpc_clear_running(task);
++              if (RPC_IS_ASYNC(task)) {
++                      /* Careful! we may have raced... */
++                      if (RPC_IS_QUEUED(task))
++                              return;
++                      if (rpc_test_and_set_running(task))
++                              return;
+                       continue;
+               }
+-              rpc_clear_running(task);
+-              spin_unlock_bh(&queue->lock);
+-              if (task_is_async)
+-                      return;
+               /* sync task: sleep here */
+               dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sunrpc/xprt.c linux-2.6.29-rc3.owrt/net/sunrpc/xprt.c
+--- linux-2.6.29.owrt/net/sunrpc/xprt.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sunrpc/xprt.c    2009-05-10 23:48:34.000000000 +0200
+@@ -663,7 +663,7 @@
+                       xprt, (xprt_connected(xprt) ? "is" : "is not"));
+       if (!xprt_bound(xprt)) {
+-              task->tk_status = -EAGAIN;
++              task->tk_status = -EIO;
+               return;
+       }
+       if (!xprt_lock_write(xprt, task))
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/sunrpc/xprtsock.c linux-2.6.29-rc3.owrt/net/sunrpc/xprtsock.c
+--- linux-2.6.29.owrt/net/sunrpc/xprtsock.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/sunrpc/xprtsock.c        2009-05-10 23:48:34.000000000 +0200
+@@ -467,7 +467,7 @@
+       int err, sent = 0;
+       if (unlikely(!sock))
+-              return -ENOTSOCK;
++              return -ENOTCONN;
+       clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
+       if (base != 0) {
+@@ -577,8 +577,6 @@
+                               req->rq_svec->iov_base,
+                               req->rq_svec->iov_len);
+-      if (!xprt_bound(xprt))
+-              return -ENOTCONN;
+       status = xs_sendpages(transport->sock,
+                             xs_addr(xprt),
+                             xprt->addrlen, xdr,
+@@ -596,10 +594,6 @@
+       }
+       switch (status) {
+-      case -ENOTSOCK:
+-              status = -ENOTCONN;
+-              /* Should we call xs_close() here? */
+-              break;
+       case -EAGAIN:
+               xs_nospace(task);
+               break;
+@@ -699,10 +693,6 @@
+       }
+       switch (status) {
+-      case -ENOTSOCK:
+-              status = -ENOTCONN;
+-              /* Should we call xs_close() here? */
+-              break;
+       case -EAGAIN:
+               xs_nospace(task);
+               break;
+@@ -1533,7 +1523,7 @@
+       struct socket *sock = transport->sock;
+       int err, status = -EIO;
+-      if (xprt->shutdown)
++      if (xprt->shutdown || !xprt_bound(xprt))
+               goto out;
+       /* Start by resetting any existing state */
+@@ -1574,7 +1564,7 @@
+       struct socket *sock = transport->sock;
+       int err, status = -EIO;
+-      if (xprt->shutdown)
++      if (xprt->shutdown || !xprt_bound(xprt))
+               goto out;
+       /* Start by resetting any existing state */
+@@ -1658,9 +1648,6 @@
+               write_unlock_bh(&sk->sk_callback_lock);
+       }
+-      if (!xprt_bound(xprt))
+-              return -ENOTCONN;
+-
+       /* Tell the socket layer to start connecting... */
+       xprt->stat.connect_count++;
+       xprt->stat.connect_start = jiffies;
+@@ -1681,7 +1668,7 @@
+       struct socket *sock = transport->sock;
+       int err, status = -EIO;
+-      if (xprt->shutdown)
++      if (xprt->shutdown || !xprt_bound(xprt))
+               goto out;
+       if (!sock) {
+@@ -1741,7 +1728,7 @@
+       struct socket *sock = transport->sock;
+       int err, status = -EIO;
+-      if (xprt->shutdown)
++      if (xprt->shutdown || !xprt_bound(xprt))
+               goto out;
+       if (!sock) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wimax/debugfs.c linux-2.6.29-rc3.owrt/net/wimax/debugfs.c
+--- linux-2.6.29.owrt/net/wimax/debugfs.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wimax/debugfs.c  2009-05-10 23:48:34.000000000 +0200
+@@ -28,6 +28,17 @@
+ #include "debug-levels.h"
++/* Debug framework control of debug levels */
++struct d_level D_LEVEL[] = {
++      D_SUBMODULE_DEFINE(debugfs),
++      D_SUBMODULE_DEFINE(id_table),
++      D_SUBMODULE_DEFINE(op_msg),
++      D_SUBMODULE_DEFINE(op_reset),
++      D_SUBMODULE_DEFINE(op_rfkill),
++      D_SUBMODULE_DEFINE(stack),
++};
++size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
++
+ #define __debugfs_register(prefix, name, parent)                      \
+ do {                                                                  \
+       result = d_level_register_debugfs(prefix, name, parent);        \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wimax/id-table.c linux-2.6.29-rc3.owrt/net/wimax/id-table.c
+--- linux-2.6.29.owrt/net/wimax/id-table.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wimax/id-table.c 2009-05-10 23:48:34.000000000 +0200
+@@ -94,13 +94,12 @@
+       list_for_each_entry(wimax_dev, &wimax_id_table, id_table_node) {
+               if (wimax_dev->net_dev->ifindex == ifindex) {
+                       dev_hold(wimax_dev->net_dev);
+-                      goto found;
++                      break;
+               }
+       }
+-      wimax_dev = NULL;
+-      d_printf(1, NULL, "wimax: no devices found with ifindex %d\n",
+-               ifindex);
+-found:
++      if (wimax_dev == NULL)
++              d_printf(1, NULL, "wimax: no devices found with ifindex %d\n",
++                       ifindex);
+       spin_unlock(&wimax_id_table_lock);
+       d_fnend(3, NULL, "(info %p ifindex %d) = %p\n",
+               info, ifindex, wimax_dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wimax/stack.c linux-2.6.29-rc3.owrt/net/wimax/stack.c
+--- linux-2.6.29.owrt/net/wimax/stack.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wimax/stack.c    2009-05-10 23:48:34.000000000 +0200
+@@ -516,19 +516,6 @@
+ }
+ EXPORT_SYMBOL_GPL(wimax_dev_rm);
+-
+-/* Debug framework control of debug levels */
+-struct d_level D_LEVEL[] = {
+-      D_SUBMODULE_DEFINE(debugfs),
+-      D_SUBMODULE_DEFINE(id_table),
+-      D_SUBMODULE_DEFINE(op_msg),
+-      D_SUBMODULE_DEFINE(op_reset),
+-      D_SUBMODULE_DEFINE(op_rfkill),
+-      D_SUBMODULE_DEFINE(stack),
+-};
+-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+-
+-
+ struct genl_family wimax_gnl_family = {
+       .id = GENL_ID_GENERATE,
+       .name = "WiMAX",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wireless/Kconfig linux-2.6.29-rc3.owrt/net/wireless/Kconfig
+--- linux-2.6.29.owrt/net/wireless/Kconfig     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wireless/Kconfig 2009-05-10 23:48:34.000000000 +0200
+@@ -102,13 +102,3 @@
+ config LIB80211_CRYPT_TKIP
+       tristate
+-
+-config LIB80211_DEBUG
+-      bool "lib80211 debugging messages"
+-      depends on LIB80211
+-      default n
+-      ---help---
+-        You can enable this if you want verbose debugging messages
+-        from lib80211.
+-
+-        If unsure, say N.
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wireless/lib80211_crypt_ccmp.c linux-2.6.29-rc3.owrt/net/wireless/lib80211_crypt_ccmp.c
+--- linux-2.6.29.owrt/net/wireless/lib80211_crypt_ccmp.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wireless/lib80211_crypt_ccmp.c   2009-05-10 23:48:34.000000000 +0200
+@@ -337,7 +337,6 @@
+       pos += 8;
+       if (ccmp_replay_check(pn, key->rx_pn)) {
+-#ifdef CONFIG_LIB80211_DEBUG
+               if (net_ratelimit()) {
+                       printk(KERN_DEBUG "CCMP: replay detected: STA=%pM "
+                                "previous PN %02x%02x%02x%02x%02x%02x "
+@@ -347,7 +346,6 @@
+                                key->rx_pn[3], key->rx_pn[4], key->rx_pn[5],
+                                pn[0], pn[1], pn[2], pn[3], pn[4], pn[5]);
+               }
+-#endif
+               key->dot11RSNAStatsCCMPReplays++;
+               return -4;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wireless/lib80211_crypt_tkip.c linux-2.6.29-rc3.owrt/net/wireless/lib80211_crypt_tkip.c
+--- linux-2.6.29.owrt/net/wireless/lib80211_crypt_tkip.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wireless/lib80211_crypt_tkip.c   2009-05-10 23:48:34.000000000 +0200
+@@ -465,14 +465,12 @@
+       pos += 8;
+       if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
+-#ifdef CONFIG_LIB80211_DEBUG
+               if (net_ratelimit()) {
+                       printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
+                              " previous TSC %08x%04x received TSC "
+                              "%08x%04x\n", hdr->addr2,
+                              tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
+               }
+-#endif
+               tkey->dot11RSNAStatsTKIPReplays++;
+               return -4;
+       }
+@@ -507,12 +505,10 @@
+                        * it needs to be recalculated for the next packet. */
+                       tkey->rx_phase1_done = 0;
+               }
+-#ifdef CONFIG_LIB80211_DEBUG
+               if (net_ratelimit()) {
+                       printk(KERN_DEBUG "TKIP: ICV error detected: STA="
+                              "%pM\n", hdr->addr2);
+               }
+-#endif
+               tkey->dot11RSNAStatsTKIPICVErrors++;
+               return -5;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wireless/nl80211.c linux-2.6.29-rc3.owrt/net/wireless/nl80211.c
+--- linux-2.6.29.owrt/net/wireless/nl80211.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wireless/nl80211.c       2009-05-10 23:48:34.000000000 +0200
+@@ -1908,11 +1908,6 @@
+       if (err)
+               return err;
+-      if (!drv->ops->get_mesh_params) {
+-              err = -EOPNOTSUPP;
+-              goto out;
+-      }
+-
+       /* Get the mesh params */
+       rtnl_lock();
+       err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
+@@ -2022,11 +2017,6 @@
+       if (err)
+               return err;
+-      if (!drv->ops->set_mesh_params) {
+-              err = -EOPNOTSUPP;
+-              goto out;
+-      }
+-
+       /* This makes sure that there aren't more than 32 mesh config
+        * parameters (otherwise our bitfield scheme would not work.) */
+       BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
+@@ -2071,7 +2061,6 @@
+       err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
+       rtnl_unlock();
+- out:
+       /* cleanup */
+       cfg80211_put_dev(drv);
+       dev_put(dev);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/wireless/reg.c linux-2.6.29-rc3.owrt/net/wireless/reg.c
+--- linux-2.6.29.owrt/net/wireless/reg.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/wireless/reg.c   2009-05-10 23:48:34.000000000 +0200
+@@ -380,8 +380,7 @@
+       freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
+-      if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+-                      freq_range->max_bandwidth_khz > freq_diff)
++      if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+               return false;
+       return true;
+@@ -499,7 +498,6 @@
+        * calculate the number of reg rules we will need. We will need one
+        * for each channel subband */
+       while (country_ie_len >= 3) {
+-              int end_channel = 0;
+               struct ieee80211_country_ie_triplet *triplet =
+                       (struct ieee80211_country_ie_triplet *) country_ie;
+               int cur_sub_max_channel = 0, cur_channel = 0;
+@@ -511,25 +509,9 @@
+                       continue;
+               }
+-              /* 2 GHz */
+-              if (triplet->chans.first_channel <= 14)
+-                      end_channel = triplet->chans.first_channel +
+-                              triplet->chans.num_channels;
+-              else
+-                      /*
+-                       * 5 GHz -- For example in country IEs if the first
+-                       * channel given is 36 and the number of channels is 4
+-                       * then the individual channel numbers defined for the
+-                       * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+-                       * and not 36, 37, 38, 39.
+-                       *
+-                       * See: http://tinyurl.com/11d-clarification
+-                       */
+-                      end_channel =  triplet->chans.first_channel +
+-                              (4 * (triplet->chans.num_channels - 1));
+-
+               cur_channel = triplet->chans.first_channel;
+-              cur_sub_max_channel = end_channel;
++              cur_sub_max_channel = ieee80211_channel_to_frequency(
++                      cur_channel + triplet->chans.num_channels);
+               /* Basic sanity check */
+               if (cur_sub_max_channel < cur_channel)
+@@ -608,6 +590,15 @@
+                       end_channel = triplet->chans.first_channel +
+                               triplet->chans.num_channels;
+               else
++                      /*
++                       * 5 GHz -- For example in country IEs if the first
++                       * channel given is 36 and the number of channels is 4
++                       * then the individual channel numbers defined for the
++                       * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
++                       * and not 36, 37, 38, 39.
++                       *
++                       * See: http://tinyurl.com/11d-clarification
++                       */
+                       end_channel =  triplet->chans.first_channel +
+                               (4 * (triplet->chans.num_channels - 1));
+@@ -1285,7 +1276,7 @@
+       if (intersected_rd) {
+               printk(KERN_DEBUG "cfg80211: We intersect both of these "
+                       "and get:\n");
+-              print_regdomain_info(intersected_rd);
++              print_regdomain_info(rd);
+               return;
+       }
+       printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/net/xfrm/xfrm_state.c linux-2.6.29-rc3.owrt/net/xfrm/xfrm_state.c
+--- linux-2.6.29.owrt/net/xfrm/xfrm_state.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/net/xfrm/xfrm_state.c        2009-05-10 23:48:34.000000000 +0200
+@@ -748,51 +748,12 @@
+               schedule_work(&net->xfrm.state_hash_work);
+ }
+-static void xfrm_state_look_at(struct xfrm_policy *pol, struct xfrm_state *x,
+-                             struct flowi *fl, unsigned short family,
+-                             xfrm_address_t *daddr, xfrm_address_t *saddr,
+-                             struct xfrm_state **best, int *acq_in_progress,
+-                             int *error)
+-{
+-      /* Resolution logic:
+-       * 1. There is a valid state with matching selector. Done.
+-       * 2. Valid state with inappropriate selector. Skip.
+-       *
+-       * Entering area of "sysdeps".
+-       *
+-       * 3. If state is not valid, selector is temporary, it selects
+-       *    only session which triggered previous resolution. Key
+-       *    manager will do something to install a state with proper
+-       *    selector.
+-       */
+-      if (x->km.state == XFRM_STATE_VALID) {
+-              if ((x->sel.family &&
+-                   !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
+-                  !security_xfrm_state_pol_flow_match(x, pol, fl))
+-                      return;
+-
+-              if (!*best ||
+-                  (*best)->km.dying > x->km.dying ||
+-                  ((*best)->km.dying == x->km.dying &&
+-                   (*best)->curlft.add_time < x->curlft.add_time))
+-                      *best = x;
+-      } else if (x->km.state == XFRM_STATE_ACQ) {
+-              *acq_in_progress = 1;
+-      } else if (x->km.state == XFRM_STATE_ERROR ||
+-                 x->km.state == XFRM_STATE_EXPIRED) {
+-              if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
+-                  security_xfrm_state_pol_flow_match(x, pol, fl))
+-                      *error = -ESRCH;
+-      }
+-}
+-
+ struct xfrm_state *
+ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
+               struct flowi *fl, struct xfrm_tmpl *tmpl,
+               struct xfrm_policy *pol, int *err,
+               unsigned short family)
+ {
+-      static xfrm_address_t saddr_wildcard = { };
+       struct net *net = xp_net(pol);
+       unsigned int h;
+       struct hlist_node *entry;
+@@ -812,27 +773,40 @@
+                   xfrm_state_addr_check(x, daddr, saddr, family) &&
+                   tmpl->mode == x->props.mode &&
+                   tmpl->id.proto == x->id.proto &&
+-                  (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+-                      xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+-                                         &best, &acquire_in_progress, &error);
+-      }
+-      if (best)
+-              goto found;
+-
+-      h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+-      hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
+-              if (x->props.family == family &&
+-                  x->props.reqid == tmpl->reqid &&
+-                  !(x->props.flags & XFRM_STATE_WILDRECV) &&
+-                  xfrm_state_addr_check(x, daddr, saddr, family) &&
+-                  tmpl->mode == x->props.mode &&
+-                  tmpl->id.proto == x->id.proto &&
+-                  (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+-                      xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+-                                         &best, &acquire_in_progress, &error);
++                  (tmpl->id.spi == x->id.spi || !tmpl->id.spi)) {
++                      /* Resolution logic:
++                         1. There is a valid state with matching selector.
++                            Done.
++                         2. Valid state with inappropriate selector. Skip.
++
++                         Entering area of "sysdeps".
++
++                         3. If state is not valid, selector is temporary,
++                            it selects only session which triggered
++                            previous resolution. Key manager will do
++                            something to install a state with proper
++                            selector.
++                       */
++                      if (x->km.state == XFRM_STATE_VALID) {
++                              if ((x->sel.family && !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
++                                  !security_xfrm_state_pol_flow_match(x, pol, fl))
++                                      continue;
++                              if (!best ||
++                                  best->km.dying > x->km.dying ||
++                                  (best->km.dying == x->km.dying &&
++                                   best->curlft.add_time < x->curlft.add_time))
++                                      best = x;
++                      } else if (x->km.state == XFRM_STATE_ACQ) {
++                              acquire_in_progress = 1;
++                      } else if (x->km.state == XFRM_STATE_ERROR ||
++                                 x->km.state == XFRM_STATE_EXPIRED) {
++                              if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
++                                  security_xfrm_state_pol_flow_match(x, pol, fl))
++                                      error = -ESRCH;
++                      }
++              }
+       }
+-found:
+       x = best;
+       if (!x && !error && !acquire_in_progress) {
+               if (tmpl->id.spi &&
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/README linux-2.6.29-rc3.owrt/README
+--- linux-2.6.29.owrt/README   2009-05-10 22:04:37.000000000 +0200
++++ linux-2.6.29-rc3.owrt/README       2009-05-10 23:48:34.000000000 +0200
+@@ -188,7 +188,7 @@
+                          values to random values.
+    You can find more information on using the Linux kernel config tools
+-   in Documentation/kbuild/kconfig.txt.
++   in Documentation/kbuild/make-configs.txt.
+       NOTES on "make config":
+       - having unnecessary drivers will make the kernel bigger, and can
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/bootgraph.pl linux-2.6.29-rc3.owrt/scripts/bootgraph.pl
+--- linux-2.6.29.owrt/scripts/bootgraph.pl     2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/bootgraph.pl 2009-05-10 23:48:34.000000000 +0200
+@@ -51,7 +51,7 @@
+ while (<>) {
+       my $line = $_;
+-      if ($line =~ /([0-9\.]+)\] calling  ([a-zA-Z0-9\_\.]+)\+/) {
++      if ($line =~ /([0-9\.]+)\] calling  ([a-zA-Z0-9\_]+)\+/) {
+               my $func = $2;
+               if ($done == 0) {
+                       $start{$func} = $1;
+@@ -87,7 +87,7 @@
+               $count = $count + 1;
+       }
+-      if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_\.]+)\+.*returned/) {
++      if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+               if ($done == 0) {
+                       $end{$2} = $1;
+                       $maxtime = $1;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/checkpatch.pl linux-2.6.29-rc3.owrt/scripts/checkpatch.pl
+--- linux-2.6.29.owrt/scripts/checkpatch.pl    2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/checkpatch.pl        2009-05-10 23:48:34.000000000 +0200
+@@ -10,7 +10,7 @@
+ my $P = $0;
+ $P =~ s@.*/@@g;
+-my $V = '0.28';
++my $V = '0.27';
+ use Getopt::Long qw(:config no_auto_abbrev);
+@@ -110,8 +110,7 @@
+                       __iomem|
+                       __must_check|
+                       __init_refok|
+-                      __kprobes|
+-                      __ref
++                      __kprobes
+               }x;
+ our $Attribute        = qr{
+                       const|
+@@ -1241,8 +1240,7 @@
+                       $realfile =~ s@^([^/]*)/@@;
+                       $p1_prefix = $1;
+-                      if (!$file && $tree && $p1_prefix ne '' &&
+-                          -e "$root/$p1_prefix") {
++                      if ($tree && $p1_prefix ne '' && -e "$root/$p1_prefix") {
+                               WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
+                       }
+@@ -1585,9 +1583,9 @@
+               }
+ # TEST: allow direct testing of the attribute matcher.
+               if ($dbg_attr) {
+-                      if ($line =~ /^.\s*$Modifier\s*$/) {
++                      if ($line =~ /^.\s*$Attribute\s*$/) {
+                               ERROR("TEST: is attr\n" . $herecurr);
+-                      } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
++                      } elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) {
+                               ERROR("TEST: is not attr ($1 is)\n". $herecurr);
+                       }
+                       next;
+@@ -1659,7 +1657,7 @@
+ # * goes on variable not on type
+               # (char*[ const])
+-              if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
++              if ($line =~ m{\($NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)*)\)}) {
+                       my ($from, $to) = ($1, $1);
+                       # Should start with a space.
+@@ -1674,7 +1672,7 @@
+                       if ($from ne $to) {
+                               ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" .  $herecurr);
+                       }
+-              } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
++              } elsif ($line =~ m{\b$NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)?)($Ident)}) {
+                       my ($from, $to, $ident) = ($1, $1, $2);
+                       # Should start with a space.
+@@ -1687,8 +1685,8 @@
+                       # Modifiers should have spaces.
+                       $to =~ s/(\b$Modifier$)/$1 /;
+-                      #print "from<$from> to<$to> ident<$ident>\n";
+-                      if ($from ne $to && $ident !~ /^$Modifier$/) {
++                      #print "from<$from> to<$to>\n";
++                      if ($from ne $to) {
+                               ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" .  $herecurr);
+                       }
+               }
+@@ -1887,11 +1885,11 @@
+                                       if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
+                                               ERROR("space required before that '$op' $at\n" . $hereptr);
+                                       }
+-                                      if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
++                                      if ($op eq '*' && $cc =~/\s*const\b/) {
+                                               # A unary '*' may be const
+                                       } elsif ($ctx =~ /.xW/) {
+-                                              ERROR("Aspace prohibited after that '$op' $at\n" . $hereptr);
++                                              ERROR("space prohibited after that '$op' $at\n" . $hereptr);
+                                       }
+                               # unary ++ and unary -- are allowed no space on one side.
+@@ -2562,7 +2560,7 @@
+               if ($line =~ /\bin_atomic\s*\(/) {
+                       if ($realfile =~ m@^drivers/@) {
+                               ERROR("do not use in_atomic in drivers\n" . $herecurr);
+-                      } elsif ($realfile !~ m@^kernel/@) {
++                      } else {
+                               WARN("use of in_atomic() is incorrect outside core kernel code\n" . $herecurr);
+                       }
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/kconfig/conf.c linux-2.6.29-rc3.owrt/scripts/kconfig/conf.c
+--- linux-2.6.29.owrt/scripts/kconfig/conf.c   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/kconfig/conf.c       2009-05-10 23:48:34.000000000 +0200
+@@ -11,7 +11,6 @@
+ #include <time.h>
+ #include <unistd.h>
+ #include <sys/stat.h>
+-#include <sys/time.h>
+ #define LKC_DIRECT_LINK
+ #include "lkc.h"
+@@ -465,22 +464,9 @@
+                       input_mode = set_yes;
+                       break;
+               case 'r':
+-              {
+-                      struct timeval now;
+-                      unsigned int seed;
+-
+-                      /*
+-                       * Use microseconds derived seed,
+-                       * compensate for systems where it may be zero
+-                       */
+-                      gettimeofday(&now, NULL);
+-
+-                      seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1));
+-                      srand(seed);
+-
+                       input_mode = set_random;
++                      srand(time(NULL));
+                       break;
+-              }
+               case 'h':
+                       printf(_("See README for usage info\n"));
+                       exit(0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/kconfig/confdata.c linux-2.6.29-rc3.owrt/scripts/kconfig/confdata.c
+--- linux-2.6.29.owrt/scripts/kconfig/confdata.c       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/kconfig/confdata.c   2009-05-10 23:48:34.000000000 +0200
+@@ -843,7 +843,7 @@
+                       default:
+                               continue;
+                       }
+-                      if (!(sym_is_choice(sym) && mode == def_random))
++                      if (!sym_is_choice(sym) || mode != def_random)
+                               sym->flags |= SYMBOL_DEF_USER;
+                       break;
+               default:
+@@ -856,49 +856,28 @@
+       if (mode != def_random)
+               return;
+-      /*
+-       * We have different type of choice blocks.
+-       * If curr.tri equal to mod then we can select several
+-       * choice symbols in one block.
+-       * In this case we do nothing.
+-       * If curr.tri equal yes then only one symbol can be
+-       * selected in a choice block and we set it to yes,
+-       * and the rest to no.
+-       */
++
+       for_all_symbols(i, csym) {
+               if (sym_has_value(csym) || !sym_is_choice(csym))
+                       continue;
+               sym_calc_value(csym);
+-
+-              if (csym->curr.tri != yes)
+-                      continue;
+-
+               prop = sym_get_choice_prop(csym);
+-
+-              /* count entries in choice block */
+-              cnt = 0;
+-              expr_list_for_each_sym(prop->expr, e, sym)
+-                      cnt++;
+-
+-              /*
+-               * find a random value and set it to yes,
+-               * set the rest to no so we have only one set
+-               */
+-              def = (rand() % cnt);
+-
+-              cnt = 0;
+-              expr_list_for_each_sym(prop->expr, e, sym) {
+-                      if (def == cnt++) {
+-                              sym->def[S_DEF_USER].tri = yes;
+-                              csym->def[S_DEF_USER].val = sym;
+-                      }
+-                      else {
+-                              sym->def[S_DEF_USER].tri = no;
++              def = -1;
++              while (1) {
++                      cnt = 0;
++                      expr_list_for_each_sym(prop->expr, e, sym) {
++                              if (sym->visible == no)
++                                      continue;
++                              if (def == cnt++) {
++                                      csym->def[S_DEF_USER].val = sym;
++                                      break;
++                              }
+                       }
++                      if (def >= 0 || cnt < 2)
++                              break;
++                      def = (rand() % cnt) + 1;
+               }
+               csym->flags |= SYMBOL_DEF_USER;
+-              /* clear VALID to get value calculated */
+-              csym->flags &= ~(SYMBOL_VALID);
+       }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/kernel-doc linux-2.6.29-rc3.owrt/scripts/kernel-doc
+--- linux-2.6.29.owrt/scripts/kernel-doc       2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/kernel-doc   2009-05-10 23:48:34.000000000 +0200
+@@ -1827,40 +1827,6 @@
+     $state = 0;
+ }
+-sub syscall_munge() {
+-      my $void = 0;
+-
+-      $prototype =~ s@[\r\n\t]+@ @gos; # strip newlines/CR's/tabs
+-##    if ($prototype =~ m/SYSCALL_DEFINE0\s*\(\s*(a-zA-Z0-9_)*\s*\)/) {
+-      if ($prototype =~ m/SYSCALL_DEFINE0/) {
+-              $void = 1;
+-##            $prototype = "long sys_$1(void)";
+-      }
+-
+-      $prototype =~ s/SYSCALL_DEFINE.*\(/long sys_/; # fix return type & func name
+-      if ($prototype =~ m/long (sys_.*?),/) {
+-              $prototype =~ s/,/\(/;
+-      } elsif ($void) {
+-              $prototype =~ s/\)/\(void\)/;
+-      }
+-
+-      # now delete all of the odd-number commas in $prototype
+-      # so that arg types & arg names don't have a comma between them
+-      my $count = 0;
+-      my $len = length($prototype);
+-      if ($void) {
+-              $len = 0;       # skip the for-loop
+-      }
+-      for (my $ix = 0; $ix < $len; $ix++) {
+-              if (substr($prototype, $ix, 1) eq ',') {
+-                      $count++;
+-                      if ($count % 2 == 1) {
+-                              substr($prototype, $ix, 1) = ' ';
+-                      }
+-              }
+-      }
+-}
+-
+ sub process_state3_function($$) {
+     my $x = shift;
+     my $file = shift;
+@@ -1873,15 +1839,11 @@
+     elsif ($x =~ /([^\{]*)/) {
+       $prototype .= $1;
+     }
+-
+     if (($x =~ /\{/) || ($x =~ /\#\s*define/) || ($x =~ /;/)) {
+       $prototype =~ s@/\*.*?\*/@@gos; # strip comments.
+       $prototype =~ s@[\r\n]+@ @gos; # strip newlines/cr's.
+       $prototype =~ s@^\s+@@gos; # strip leading spaces
+-      if ($prototype =~ /SYSCALL_DEFINE/) {
+-              syscall_munge();
+-      }
+-      dump_function($prototype, $file);
++      dump_function($prototype,$file);
+       reset_state();
+     }
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/markup_oops.pl linux-2.6.29-rc3.owrt/scripts/markup_oops.pl
+--- linux-2.6.29.owrt/scripts/markup_oops.pl   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/markup_oops.pl       2009-05-10 23:48:34.000000000 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/perl
++#!/usr/bin/perl -w
+ use File::Basename;
+@@ -29,151 +29,27 @@
+ my $target = "0";
+ my $function;
+ my $module = "";
+-my $func_offset = 0;
++my $func_offset;
+ my $vmaoffset = 0;
+-my %regs;
+-
+-
+-sub parse_x86_regs
+-{
+-      my ($line) = @_;
+-      if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) {
+-              $regs{"%eax"} = $1;
+-              $regs{"%ebx"} = $2;
+-              $regs{"%ecx"} = $3;
+-              $regs{"%edx"} = $4;
+-      }
+-      if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) {
+-              $regs{"%esi"} = $1;
+-              $regs{"%edi"} = $2;
+-              $regs{"%esp"} = $4;
+-      }
+-      if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) {
+-              $regs{"%eax"} = $1;
+-              $regs{"%ebx"} = $2;
+-              $regs{"%ecx"} = $3;
+-      }
+-      if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) {
+-              $regs{"%edx"} = $1;
+-              $regs{"%esi"} = $2;
+-              $regs{"%edi"} = $3;
+-      }
+-      if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) {
+-              $regs{"%r08"} = $2;
+-              $regs{"%r09"} = $3;
+-      }
+-      if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) {
+-              $regs{"%r10"} = $1;
+-              $regs{"%r11"} = $2;
+-              $regs{"%r12"} = $3;
+-      }
+-      if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) {
+-              $regs{"%r13"} = $1;
+-              $regs{"%r14"} = $2;
+-              $regs{"%r15"} = $3;
+-      }
+-}
+-
+-sub reg_name
+-{
+-      my ($reg) = @_;
+-      $reg =~ s/r(.)x/e\1x/;
+-      $reg =~ s/r(.)i/e\1i/;
+-      $reg =~ s/r(.)p/e\1p/;
+-      return $reg;
+-}
+-
+-sub process_x86_regs
+-{
+-      my ($line, $cntr) = @_;
+-      my $str = "";
+-      if (length($line) < 40) {
+-              return ""; # not an asm istruction
+-      }
+-
+-      # find the arguments to the instruction
+-      if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) {
+-              $lastword = $1;
+-      } else {
+-              return "";
+-      }
+-
+-      # we need to find the registers that get clobbered,
+-      # since their value is no longer relevant for previous
+-      # instructions in the stream.
+-
+-      $clobber = $lastword;
+-      # first, remove all memory operands, they're read only
+-      $clobber =~ s/\([a-z0-9\%\,]+\)//g;
+-      # then, remove everything before the comma, thats the read part
+-      $clobber =~ s/.*\,//g;
+-
+-      # if this is the instruction that faulted, we haven't actually done
+-      # the write yet... nothing is clobbered.
+-      if ($cntr == 0) {
+-              $clobber = "";
+-      }
+-
+-      foreach $reg (keys(%regs)) {
+-              my $clobberprime = reg_name($clobber);
+-              my $lastwordprime = reg_name($lastword);
+-              my $val = $regs{$reg};
+-              if ($val =~ /^[0]+$/) {
+-                      $val = "0";
+-              } else {
+-                      $val =~ s/^0*//;
+-              }
+-
+-              # first check if we're clobbering this register; if we do
+-              # we print it with a =>, and then delete its value
+-              if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) {
+-                      if (length($val) > 0) {
+-                              $str = $str . " $reg => $val ";
+-                      }
+-                      $regs{$reg} = "";
+-                      $val = "";
+-              }
+-              # now check if we're reading this register
+-              if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) {
+-                      if (length($val) > 0) {
+-                              $str = $str . " $reg = $val ";
+-                      }
+-              }
+-      }
+-      return $str;
+-}
+-
+-# parse the oops
+ while (<STDIN>) {
+       my $line = $_;
+       if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
+               $target = $1;
+       }
+-      if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
+-              $target = $1;
+-      }
+       if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+               $function = $1;
+               $func_offset = $2;
+       }
+-      if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+-              $function = $1;
+-              $func_offset = $2;
+-      }
+       # check if it's a module
+       if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+               $module = $3;
+       }
+-      if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+-              $module = $3;
+-      }
+-      parse_x86_regs($line);
+ }
+ my $decodestart = hex($target) - hex($func_offset);
+-my $decodestop = hex($target) + 8192;
++my $decodestop = $decodestart + 8192;
+ if ($target eq "0") {
+       print "No oops found!\n";
+       print "Usage: \n";
+@@ -208,7 +84,6 @@
+ my $state   = 0;
+ my $center  = 0;
+ my @lines;
+-my @reglines;
+ sub InRange {
+       my ($address, $target) = @_;
+@@ -313,36 +188,16 @@
+ my $i;
+-
+-# start annotating the registers in the asm.
+-# this goes from the oopsing point back, so that the annotator
+-# can track (opportunistically) which registers got written and
+-# whos value no longer is relevant.
+-
+-$i = $center;
+-while ($i >= $start) {
+-      $reglines[$i] = process_x86_regs($lines[$i], $center - $i);
+-      $i = $i - 1;
+-}
+-
++my $fulltext = "";
+ $i = $start;
+ while ($i < $finish) {
+-      my $line;
+       if ($i == $center) {
+-              $line =  "*$lines[$i] ";
++              $fulltext = $fulltext . "*$lines[$i]     <----- faulting instruction\n";
+       } else {
+-              $line =  " $lines[$i] ";
+-      }
+-      print $line;
+-      if (defined($reglines[$i]) && length($reglines[$i]) > 0) {
+-              my $c = 60 - length($line);
+-              while ($c > 0) { print " "; $c = $c - 1; };
+-              print "| $reglines[$i]";
++              $fulltext = $fulltext .  " $lines[$i]\n";
+       }
+-      if ($i == $center) {
+-              print "<--- faulting instruction";
+-      }
+-      print "\n";
+       $i = $i +1;
+ }
++print $fulltext;
++
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/mod/file2alias.c linux-2.6.29-rc3.owrt/scripts/mod/file2alias.c
+--- linux-2.6.29.owrt/scripts/mod/file2alias.c 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/mod/file2alias.c     2009-05-10 23:48:34.000000000 +0200
+@@ -210,7 +210,6 @@
+ static int do_hid_entry(const char *filename,
+                            struct hid_device_id *id, char *alias)
+ {
+-      id->bus = TO_NATIVE(id->bus);
+       id->vendor = TO_NATIVE(id->vendor);
+       id->product = TO_NATIVE(id->product);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/package/Makefile linux-2.6.29-rc3.owrt/scripts/package/Makefile
+--- linux-2.6.29.owrt/scripts/package/Makefile 2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/package/Makefile     2009-05-10 23:48:34.000000000 +0200
+@@ -35,10 +35,9 @@
+ rpm-pkg rpm: $(objtree)/kernel.spec FORCE
+       $(MAKE) clean
+       $(PREV) ln -sf $(srctree) $(KERNELPATH)
+-      $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
+       $(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
+       $(PREV) rm $(KERNELPATH)
+-      rm -f $(objtree)/.scmversion
++
+       set -e; \
+       $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
+       set -e; \
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/package/mkspec linux-2.6.29-rc3.owrt/scripts/package/mkspec
+--- linux-2.6.29.owrt/scripts/package/mkspec   2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/package/mkspec       2009-05-10 23:48:34.000000000 +0200
+@@ -86,17 +86,9 @@
+ echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
+ echo 'cp .config $RPM_BUILD_ROOT'"/boot/config-$KERNELRELEASE"
+-
+-echo "%ifnarch ppc64"
+-echo 'cp vmlinux vmlinux.orig'
+-echo 'bzip2 -9 vmlinux'
+-echo 'mv vmlinux.bz2 $RPM_BUILD_ROOT'"/boot/vmlinux-$KERNELRELEASE.bz2"
+-echo 'mv vmlinux.orig vmlinux'
+-echo "%endif"
+-
+ echo ""
+ echo "%clean"
+-echo 'rm -rf $RPM_BUILD_ROOT'
++echo '#echo -rf $RPM_BUILD_ROOT'
+ echo ""
+ echo "%files"
+ echo '%defattr (-, root, root)'
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/setlocalversion linux-2.6.29-rc3.owrt/scripts/setlocalversion
+--- linux-2.6.29.owrt/scripts/setlocalversion  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/setlocalversion      2009-05-10 23:48:34.000000000 +0200
+@@ -58,7 +58,14 @@
+ # Check for svn and a svn repo.
+ if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
+       rev=`echo $rev | awk '{print $NF}'`
+-      printf -- '-svn%s' "$rev"
++      changes=`svn status 2>/dev/null | grep '^[AMD]' | wc -l`
++
++      # Are there uncommitted changes?
++      if [ $changes != 0 ]; then
++              printf -- '-svn%s%s' "$rev" -dirty
++      else
++              printf -- '-svn%s' "$rev"
++      fi
+       # All done with svn
+       exit
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/tags.sh linux-2.6.29-rc3.owrt/scripts/tags.sh
+--- linux-2.6.29.owrt/scripts/tags.sh  2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/tags.sh      2009-05-10 23:48:34.000000000 +0200
+@@ -76,10 +76,7 @@
+ all_kconfigs()
+ {
+-      for arch in $ALLSOURCE_ARCHS; do
+-              find_sources $arch 'Kconfig*'
+-      done
+-      find_other_sources 'Kconfig*'
++      find_sources $ALLSOURCE_ARCHS 'Kconfig*'
+ }
+ all_defconfigs()
+@@ -102,8 +99,7 @@
+       -I ____cacheline_internodealigned_in_smp                \
+       -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL                      \
+       --extra=+f --c-kinds=+px                                \
+-      --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'                  \
+-      --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
++      --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'
+       all_kconfigs | xargs $1 -a                              \
+       --langdef=kconfig --language-force=kconfig              \
+@@ -121,9 +117,7 @@
+ emacs()
+ {
+-      all_sources | xargs $1 -a                               \
+-      --regex='/^ENTRY(\([^)]*\)).*/\1/'                      \
+-      --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/'
++      all_sources | xargs $1 -a
+       all_kconfigs | xargs $1 -a                              \
+       --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/scripts/unifdef.c linux-2.6.29-rc3.owrt/scripts/unifdef.c
+--- linux-2.6.29.owrt/scripts/unifdef.c        2009-05-10 22:04:38.000000000 +0200
++++ linux-2.6.29-rc3.owrt/scripts/unifdef.c    2009-05-10 23:48:34.000000000 +0200
+@@ -206,7 +206,7 @@
+ static void             error(const char *);
+ static int              findsym(const char *);
+ static void             flushline(bool);
+-static Linetype         get_line(void);
++static Linetype         getline(void);
+ static Linetype         ifeval(const char **);
+ static void             ignoreoff(void);
+ static void             ignoreon(void);
+@@ -512,7 +512,7 @@
+       for (;;) {
+               linenum++;
+-              lineval = get_line();
++              lineval = getline();
+               trans_table[ifstate[depth]][lineval]();
+               debug("process %s -> %s depth %d",
+                   linetype_name[lineval],
+@@ -526,7 +526,7 @@
+  * help from skipcomment().
+  */
+ static Linetype
+-get_line(void)
++getline(void)
+ {
+       const char *cp;
+       int cursym;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/security/selinux/netlabel.c linux-2.6.29-rc3.owrt/security/selinux/netlabel.c
+--- linux-2.6.29.owrt/security/selinux/netlabel.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/security/selinux/netlabel.c  2009-05-10 23:48:34.000000000 +0200
+@@ -386,12 +386,11 @@
+       if (!S_ISSOCK(inode->i_mode) ||
+           ((mask & (MAY_WRITE | MAY_APPEND)) == 0))
+               return 0;
++
+       sock = SOCKET_I(inode);
+       sk = sock->sk;
+-      if (sk == NULL)
+-              return 0;
+       sksec = sk->sk_security;
+-      if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
++      if (sksec->nlbl_state != NLBL_REQUIRE)
+               return 0;
+       local_bh_disable();
+@@ -491,10 +490,8 @@
+               lock_sock(sk);
+               rc = netlbl_sock_getattr(sk, &secattr);
+               release_sock(sk);
+-              if (rc == 0)
++              if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE)
+                       rc = -EACCES;
+-              else if (rc == -ENOMSG)
+-                      rc = 0;
+               netlbl_secattr_destroy(&secattr);
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/security/smack/smackfs.c linux-2.6.29-rc3.owrt/security/smack/smackfs.c
+--- linux-2.6.29.owrt/security/smack/smackfs.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/security/smack/smackfs.c     2009-05-10 23:48:34.000000000 +0200
+@@ -650,6 +650,10 @@
+       return skp;
+ }
++/*
++#define BEMASK        0x80000000
++*/
++#define BEMASK        0x00000001
+ #define BEBITS        (sizeof(__be32) * 8)
+ /*
+@@ -659,10 +663,12 @@
+ {
+       struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
+       unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
+-      int maskn;
+-      u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
++      __be32 bebits;
++      int maskn = 0;
+-      for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
++      for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
++              if ((skp->smk_mask.s_addr & bebits) == 0)
++                      break;
+       seq_printf(s, "%u.%u.%u.%u/%d %s\n",
+               hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
+@@ -696,42 +702,6 @@
+ }
+ /**
+- * smk_netlbladdr_insert
+- * @new : netlabel to insert
+- *
+- * This helper insert netlabel in the smack_netlbladdrs list
+- * sorted by netmask length (longest to smallest)
+- */
+-static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+-{
+-      struct smk_netlbladdr *m;
+-
+-      if (smack_netlbladdrs == NULL) {
+-              smack_netlbladdrs = new;
+-              return;
+-      }
+-
+-      /* the comparison '>' is a bit hacky, but works */
+-      if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+-              new->smk_next = smack_netlbladdrs;
+-              smack_netlbladdrs = new;
+-              return;
+-      }
+-      for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+-              if (m->smk_next == NULL) {
+-                      m->smk_next = new;
+-                      return;
+-              }
+-              if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+-                      new->smk_next = m->smk_next;
+-                      m->smk_next = new;
+-                      return;
+-              }
+-      }
+-}
+-
+-
+-/**
+  * smk_write_netlbladdr - write() for /smack/netlabel
+  * @filp: file pointer, not actually used
+  * @buf: where to get the data from
+@@ -754,9 +724,8 @@
+       struct netlbl_audit audit_info;
+       struct in_addr mask;
+       unsigned int m;
+-      u32 mask_bits = (1<<31);
++      __be32 bebits = BEMASK;
+       __be32 nsa;
+-      u32 temp_mask;
+       /*
+        * Must have privilege.
+@@ -792,13 +761,10 @@
+       if (sp == NULL)
+               return -EINVAL;
+-      for (temp_mask = 0; m > 0; m--) {
+-              temp_mask |= mask_bits;
+-              mask_bits >>= 1;
++      for (mask.s_addr = 0; m > 0; m--) {
++              mask.s_addr |= bebits;
++              bebits <<= 1;
+       }
+-      mask.s_addr = cpu_to_be32(temp_mask);
+-
+-      newname.sin_addr.s_addr &= mask.s_addr;
+       /*
+        * Only allow one writer at a time. Writes should be
+        * quite rare and small in any case.
+@@ -806,7 +772,6 @@
+       mutex_lock(&smk_netlbladdr_lock);
+       nsa = newname.sin_addr.s_addr;
+-      /* try to find if the prefix is already in the list */
+       for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
+               if (skp->smk_host.sin_addr.s_addr == nsa &&
+                   skp->smk_mask.s_addr == mask.s_addr)
+@@ -822,8 +787,9 @@
+                       rc = 0;
+                       skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
+                       skp->smk_mask.s_addr = mask.s_addr;
++                      skp->smk_next = smack_netlbladdrs;
+                       skp->smk_label = sp;
+-                      smk_netlbladdr_insert(skp);
++                      smack_netlbladdrs = skp;
+               }
+       } else {
+               rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/security/smack/smack_lsm.c linux-2.6.29-rc3.owrt/security/smack/smack_lsm.c
+--- linux-2.6.29.owrt/security/smack/smack_lsm.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/security/smack/smack_lsm.c   2009-05-10 23:48:34.000000000 +0200
+@@ -1498,31 +1498,58 @@
+  * looks for host based access restrictions
+  *
+  * This version will only be appropriate for really small
+- * sets of single label hosts.
++ * sets of single label hosts. Because of the masking
++ * it cannot shortcut out on the first match. There are
++ * numerious ways to address the problem, but none of them
++ * have been applied here.
+  *
+  * Returns the label of the far end or NULL if it's not special.
+  */
+ static char *smack_host_label(struct sockaddr_in *sip)
+ {
+       struct smk_netlbladdr *snp;
++      char *bestlabel = NULL;
+       struct in_addr *siap = &sip->sin_addr;
++      struct in_addr *liap;
++      struct in_addr *miap;
++      struct in_addr bestmask;
+       if (siap->s_addr == 0)
+               return NULL;
++      bestmask.s_addr = 0;
++
+       for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
++              liap = &snp->smk_host.sin_addr;
++              miap = &snp->smk_mask;
++              /*
++               * If the addresses match after applying the list entry mask
++               * the entry matches the address. If it doesn't move along to
++               * the next entry.
++               */
++              if ((liap->s_addr & miap->s_addr) !=
++                  (siap->s_addr & miap->s_addr))
++                      continue;
+               /*
+-               * we break after finding the first match because
+-               * the list is sorted from longest to shortest mask
+-               * so we have found the most specific match
++               * If the list entry mask identifies a single address
++               * it can't get any more specific.
+                */
+-              if ((&snp->smk_host.sin_addr)->s_addr  ==
+-                      (siap->s_addr & (&snp->smk_mask)->s_addr)) {
++              if (miap->s_addr == 0xffffffff)
+                       return snp->smk_label;
+-              }
++              /*
++               * If the list entry mask is less specific than the best
++               * already found this entry is uninteresting.
++               */
++              if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
++                      continue;
++              /*
++               * This is better than any entry found so far.
++               */
++              bestmask.s_addr = miap->s_addr;
++              bestlabel = snp->smk_label;
+       }
+-      return NULL;
++      return bestlabel;
+ }
+ /**
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/arm/aaci.c linux-2.6.29-rc3.owrt/sound/arm/aaci.c
+--- linux-2.6.29.owrt/sound/arm/aaci.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/arm/aaci.c     2009-05-10 23:48:34.000000000 +0200
+@@ -90,7 +90,7 @@
+        */
+       do {
+               v = readl(aaci->base + AACI_SLFR);
+-      } while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout);
++      } while ((v & (SLFR_1TXB|SLFR_2TXB)) && timeout--);
+       if (!timeout)
+               dev_err(&aaci->dev->dev,
+@@ -126,7 +126,7 @@
+        */
+       do {
+               v = readl(aaci->base + AACI_SLFR);
+-      } while ((v & SLFR_1TXB) && --timeout);
++      } while ((v & SLFR_1TXB) && timeout--);
+       if (!timeout) {
+               dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
+@@ -147,7 +147,7 @@
+       do {
+               cond_resched();
+               v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
+-      } while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout);
++      } while ((v != (SLFR_1RXV|SLFR_2RXV)) && timeout--);
+       if (!timeout) {
+               dev_err(&aaci->dev->dev, "timeout on RX valid\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/core/jack.c linux-2.6.29-rc3.owrt/sound/core/jack.c
+--- linux-2.6.29.owrt/sound/core/jack.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/core/jack.c    2009-05-10 23:48:34.000000000 +0200
+@@ -47,7 +47,7 @@
+       int err;
+       snprintf(jack->name, sizeof(jack->name), "%s %s",
+-               card->shortname, jack->id);
++               card->longname, jack->id);
+       jack->input_dev->name = jack->name;
+       /* Default to the sound card device. */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/core/oss/mixer_oss.c linux-2.6.29-rc3.owrt/sound/core/oss/mixer_oss.c
+--- linux-2.6.29.owrt/sound/core/oss/mixer_oss.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/core/oss/mixer_oss.c   2009-05-10 23:48:34.000000000 +0200
+@@ -692,9 +692,6 @@
+               snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_PVOLUME], left, right);
+               if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME)
+                       snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
+-      } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME) {
+-              snd_mixer_oss_put_volume1_vol(fmixer, pslot,
+-                      slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
+       } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GVOLUME) {
+               snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_GVOLUME], left, right);
+       } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GLOBAL) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/core/oss/pcm_oss.c linux-2.6.29-rc3.owrt/sound/core/oss/pcm_oss.c
+--- linux-2.6.29.owrt/sound/core/oss/pcm_oss.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/core/oss/pcm_oss.c     2009-05-10 23:48:34.000000000 +0200
+@@ -1767,7 +1767,7 @@
+                      AFMT_S8 | AFMT_U16_LE |
+                      AFMT_U16_BE |
+                       AFMT_S32_LE | AFMT_S32_BE |
+-                      AFMT_S24_LE | AFMT_S24_BE |
++                      AFMT_S24_LE | AFMT_S24_LE |
+                       AFMT_S24_PACKED;
+       params = kmalloc(sizeof(*params), GFP_KERNEL);
+       if (!params)
+@@ -2872,7 +2872,7 @@
+                       setup = kmalloc(sizeof(*setup), GFP_KERNEL);
+                       if (! setup) {
+                               buffer->error = -ENOMEM;
+-                              mutex_unlock(&pstr->oss.setup_mutex);
++                              mutex_lock(&pstr->oss.setup_mutex);
+                               return;
+                       }
+                       if (pstr->oss.setup_list == NULL)
+@@ -2886,7 +2886,7 @@
+                       if (! template.task_name) {
+                               kfree(setup);
+                               buffer->error = -ENOMEM;
+-                              mutex_unlock(&pstr->oss.setup_mutex);
++                              mutex_lock(&pstr->oss.setup_mutex);
+                               return;
+                       }
+               }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/core/oss/rate.c linux-2.6.29-rc3.owrt/sound/core/oss/rate.c
+--- linux-2.6.29.owrt/sound/core/oss/rate.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/core/oss/rate.c        2009-05-10 23:48:34.000000000 +0200
+@@ -157,7 +157,7 @@
+               while (dst_frames1 > 0) {
+                       S1 = S2;
+                       if (src_frames1-- > 0) {
+-                              S2 = *src;
++                              S1 = *src;
+                               src += src_step;
+                       }
+                       if (pos & ~R_MASK) {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/core/sgbuf.c linux-2.6.29-rc3.owrt/sound/core/sgbuf.c
+--- linux-2.6.29.owrt/sound/core/sgbuf.c       2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/core/sgbuf.c   2009-05-10 23:48:34.000000000 +0200
+@@ -38,10 +38,6 @@
+       if (! sgbuf)
+               return -EINVAL;
+-      if (dmab->area)
+-              vunmap(dmab->area);
+-      dmab->area = NULL;
+-
+       tmpb.dev.type = SNDRV_DMA_TYPE_DEV;
+       tmpb.dev.dev = sgbuf->dev;
+       for (i = 0; i < sgbuf->pages; i++) {
+@@ -52,6 +48,9 @@
+               tmpb.bytes = (sgbuf->table[i].addr & ~PAGE_MASK) << PAGE_SHIFT;
+               snd_dma_free_pages(&tmpb);
+       }
++      if (dmab->area)
++              vunmap(dmab->area);
++      dmab->area = NULL;
+       kfree(sgbuf->table);
+       kfree(sgbuf->page_table);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/drivers/mtpav.c linux-2.6.29-rc3.owrt/sound/drivers/mtpav.c
+--- linux-2.6.29.owrt/sound/drivers/mtpav.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/drivers/mtpav.c        2009-05-10 23:48:34.000000000 +0200
+@@ -706,6 +706,7 @@
+       mtp_card->card = card;
+       mtp_card->irq = -1;
+       mtp_card->share_irq = 0;
++      mtp_card->inmidiport = 0xffffffff;
+       mtp_card->inmidistate = 0;
+       mtp_card->outmidihwport = 0xffffffff;
+       init_timer(&mtp_card->timer);
+@@ -718,8 +719,6 @@
+       if (err < 0)
+               goto __error;
+-      mtp_card->inmidiport = mtp_card->num_ports + MTPAV_PIDX_BROADCAST;
+-
+       err = snd_mtpav_get_ISA(mtp_card);
+       if (err < 0)
+               goto __error;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/isa/opl3sa2.c linux-2.6.29-rc3.owrt/sound/isa/opl3sa2.c
+--- linux-2.6.29.owrt/sound/isa/opl3sa2.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/isa/opl3sa2.c  2009-05-10 23:48:34.000000000 +0200
+@@ -550,27 +550,21 @@
+ #ifdef CONFIG_PM
+ static int snd_opl3sa2_suspend(struct snd_card *card, pm_message_t state)
+ {
+-      if (card) {
+-              struct snd_opl3sa2 *chip = card->private_data;
++      struct snd_opl3sa2 *chip = card->private_data;
+-              snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+-              chip->wss->suspend(chip->wss);
+-              /* power down */
+-              snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+-      }
++      snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
++      chip->wss->suspend(chip->wss);
++      /* power down */
++      snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+       return 0;
+ }
+ static int snd_opl3sa2_resume(struct snd_card *card)
+ {
+-      struct snd_opl3sa2 *chip;
++      struct snd_opl3sa2 *chip = card->private_data;
+       int i;
+-      if (!card)
+-              return 0;
+-
+-      chip = card->private_data;
+       /* power up */
+       snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D0);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/oss/dmasound/dmasound_atari.c linux-2.6.29-rc3.owrt/sound/oss/dmasound/dmasound_atari.c
+--- linux-2.6.29.owrt/sound/oss/dmasound/dmasound_atari.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/oss/dmasound/dmasound_atari.c  2009-05-10 23:48:34.000000000 +0200
+@@ -847,23 +847,23 @@
+          of events. So all we need to keep the music playing is
+          to provide the sound hardware with new data upon
+          an interrupt from timer A. */
+-      st_mfp.tim_ct_a = 0;    /* ++roman: Stop timer before programming! */
+-      st_mfp.tim_dt_a = 1;    /* Cause interrupt after first event. */
+-      st_mfp.tim_ct_a = 8;    /* Turn on event counting. */
++      mfp.tim_ct_a = 0;       /* ++roman: Stop timer before programming! */
++      mfp.tim_dt_a = 1;       /* Cause interrupt after first event. */
++      mfp.tim_ct_a = 8;       /* Turn on event counting. */
+       /* Register interrupt handler. */
+       if (request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound",
+                       AtaInterrupt))
+               return 0;
+-      st_mfp.int_en_a |= 0x20;        /* Turn interrupt on. */
+-      st_mfp.int_mk_a |= 0x20;
++      mfp.int_en_a |= 0x20;   /* Turn interrupt on. */
++      mfp.int_mk_a |= 0x20;
+       return 1;
+ }
+ #ifdef MODULE
+ static void AtaIrqCleanUp(void)
+ {
+-      st_mfp.tim_ct_a = 0;            /* stop timer */
+-      st_mfp.int_en_a &= ~0x20;       /* turn interrupt off */
++      mfp.tim_ct_a = 0;       /* stop timer */
++      mfp.int_en_a &= ~0x20;  /* turn interrupt off */
+       free_irq(IRQ_MFP_TIMA, AtaInterrupt);
+ }
+ #endif /* MODULE */
+@@ -1599,7 +1599,7 @@
+               is_falcon = 0;
+           } else
+               return -ENODEV;
+-          if ((st_mfp.int_en_a & st_mfp.int_mk_a & 0x20) == 0)
++          if ((mfp.int_en_a & mfp.int_mk_a & 0x20) == 0)
+               return dmasound_init();
+           else {
+               printk("DMA sound driver: Timer A interrupt already in use\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/aw2/aw2-alsa.c linux-2.6.29-rc3.owrt/sound/pci/aw2/aw2-alsa.c
+--- linux-2.6.29.owrt/sound/pci/aw2/aw2-alsa.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/aw2/aw2-alsa.c     2009-05-10 23:48:34.000000000 +0200
+@@ -165,7 +165,7 @@
+ MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
+ static struct pci_device_id snd_aw2_ids[] = {
+-      {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
++      {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID,
+        0, 0, 0},
+       {0}
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/emu10k1/emu10k1_main.c linux-2.6.29-rc3.owrt/sound/pci/emu10k1/emu10k1_main.c
+--- linux-2.6.29.owrt/sound/pci/emu10k1/emu10k1_main.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/emu10k1/emu10k1_main.c     2009-05-10 23:48:34.000000000 +0200
+@@ -1528,7 +1528,6 @@
+        .ca0151_chip = 1,
+        .spk71 = 1,
+        .spdif_bug = 1,
+-       .invert_shared_spdif = 1,      /* digital/analog switch swapped */
+        .ac97_chip = 1} ,
+       {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
+        .driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_codec.c linux-2.6.29-rc3.owrt/sound/pci/hda/hda_codec.c
+--- linux-2.6.29.owrt/sound/pci/hda/hda_codec.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_codec.c    2009-05-10 23:48:34.000000000 +0200
+@@ -487,6 +487,7 @@
+ {
+       struct hda_bus *bus;
+       int err;
++      char qname[8];
+       static struct snd_device_ops dev_ops = {
+               .dev_register = snd_hda_bus_dev_register,
+               .dev_free = snd_hda_bus_dev_free,
+@@ -516,12 +517,10 @@
+       mutex_init(&bus->cmd_mutex);
+       INIT_LIST_HEAD(&bus->codec_list);
+-      snprintf(bus->workq_name, sizeof(bus->workq_name),
+-               "hd-audio%d", card->number);
+-      bus->workq = create_singlethread_workqueue(bus->workq_name);
++      snprintf(qname, sizeof(qname), "hda%d", card->number);
++      bus->workq = create_workqueue(qname);
+       if (!bus->workq) {
+-              snd_printk(KERN_ERR "cannot create workqueue %s\n",
+-                         bus->workq_name);
++              snd_printk(KERN_ERR "cannot create workqueue %s\n", qname);
+               kfree(bus);
+               return -ENOMEM;
+       }
+@@ -3088,16 +3087,6 @@
+ }
+ EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_prepare);
+-int snd_hda_multi_out_dig_cleanup(struct hda_codec *codec,
+-                                struct hda_multi_out *mout)
+-{
+-      mutex_lock(&codec->spdif_mutex);
+-      cleanup_dig_out_stream(codec, mout->dig_out_nid);
+-      mutex_unlock(&codec->spdif_mutex);
+-      return 0;
+-}
+-EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_cleanup);
+-
+ /*
+  * release the digital out
+  */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_codec.h linux-2.6.29-rc3.owrt/sound/pci/hda/hda_codec.h
+--- linux-2.6.29.owrt/sound/pci/hda/hda_codec.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_codec.h    2009-05-10 23:48:34.000000000 +0200
+@@ -614,7 +614,6 @@
+       /* unsolicited event queue */
+       struct hda_bus_unsolicited *unsol;
+-      char workq_name[16];
+       struct workqueue_struct *workq; /* common workqueue for codecs */
+       /* assigned PCMs */
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_hwdep.c linux-2.6.29-rc3.owrt/sound/pci/hda/hda_hwdep.c
+--- linux-2.6.29.owrt/sound/pci/hda/hda_hwdep.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_hwdep.c    2009-05-10 23:48:34.000000000 +0200
+@@ -175,7 +175,7 @@
+       err = snd_hda_codec_build_controls(codec);
+       if (err < 0)
+               return err;
+-      return snd_card_register(codec->bus->card);
++      return 0;
+ }
+ /*
+@@ -277,19 +277,18 @@
+ {
+       struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+       struct hda_codec *codec = hwdep->private_data;
+-      struct hda_verb *v;
+-      int nid, verb, param;
++      char *p;
++      struct hda_verb verb, *v;
+-      if (sscanf(buf, "%i %i %i", &nid, &verb, &param) != 3)
+-              return -EINVAL;
+-      if (!nid || !verb)
++      verb.nid = simple_strtoul(buf, &p, 0);
++      verb.verb = simple_strtoul(p, &p, 0);
++      verb.param = simple_strtoul(p, &p, 0);
++      if (!verb.nid || !verb.verb || !verb.param)
+               return -EINVAL;
+       v = snd_array_new(&codec->init_verbs);
+       if (!v)
+               return -ENOMEM;
+-      v->nid = nid;
+-      v->verb = verb;
+-      v->param = param;
++      *v = verb;
+       return count;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_intel.c linux-2.6.29-rc3.owrt/sound/pci/hda/hda_intel.c
+--- linux-2.6.29.owrt/sound/pci/hda/hda_intel.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_intel.c    2009-05-10 23:48:34.000000000 +0200
+@@ -1947,13 +1947,16 @@
+       return 0;
+ }
++static int azx_resume_early(struct pci_dev *pci)
++{
++      return pci_restore_state(pci);
++}
++
+ static int azx_resume(struct pci_dev *pci)
+ {
+       struct snd_card *card = pci_get_drvdata(pci);
+       struct azx *chip = card->private_data;
+-      pci_set_power_state(pci, PCI_D0);
+-      pci_restore_state(pci);
+       if (pci_enable_device(pci) < 0) {
+               printk(KERN_ERR "hda-intel: pci_enable_device failed, "
+                      "disabling device\n");
+@@ -2059,31 +2062,26 @@
+ {
+       const struct snd_pci_quirk *q;
+-      switch (fix) {
+-      case POS_FIX_LPIB:
+-      case POS_FIX_POSBUF:
+-              return fix;
+-      }
+-
+-      /* Check VIA/ATI HD Audio Controller exist */
+-      switch (chip->driver_type) {
+-      case AZX_DRIVER_VIA:
+-      case AZX_DRIVER_ATI:
++      /* Check VIA HD Audio Controller exist */
++      if (chip->pci->vendor == PCI_VENDOR_ID_VIA &&
++          chip->pci->device == VIA_HDAC_DEVICE_ID) {
+               chip->via_dmapos_patch = 1;
+               /* Use link position directly, avoid any transfer problem. */
+               return POS_FIX_LPIB;
+       }
+       chip->via_dmapos_patch = 0;
+-      q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
+-      if (q) {
+-              printk(KERN_INFO
+-                     "hda_intel: position_fix set to %d "
+-                     "for device %04x:%04x\n",
+-                     q->value, q->subvendor, q->subdevice);
+-              return q->value;
++      if (fix == POS_FIX_AUTO) {
++              q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
++              if (q) {
++                      printk(KERN_INFO
++                                  "hda_intel: position_fix set to %d "
++                                  "for device %04x:%04x\n",
++                                  q->value, q->subvendor, q->subdevice);
++                      return q->value;
++              }
+       }
+-      return POS_FIX_AUTO;
++      return fix;
+ }
+ /*
+@@ -2100,8 +2098,6 @@
+       SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
+       /* including bogus ALC268 in slot#2 that conflicts with ALC888 */
+       SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+-      /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
+-      SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
+       {}
+ };
+@@ -2215,17 +2211,9 @@
+       gcap = azx_readw(chip, GCAP);
+       snd_printdd("chipset global capabilities = 0x%x\n", gcap);
+-      /* ATI chips seems buggy about 64bit DMA addresses */
+-      if (chip->driver_type == AZX_DRIVER_ATI)
+-              gcap &= ~0x01;
+-
+       /* allow 64bit DMA address if supported by H/W */
+       if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
+               pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+-      else {
+-              pci_set_dma_mask(pci, DMA_32BIT_MASK);
+-              pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+-      }
+       /* read number of streams from GCAP register instead of using
+        * hardcoded value
+@@ -2480,6 +2468,7 @@
+       .remove = __devexit_p(azx_remove),
+ #ifdef CONFIG_PM
+       .suspend = azx_suspend,
++      .resume_early = azx_resume_early,
+       .resume = azx_resume,
+ #endif
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_local.h linux-2.6.29-rc3.owrt/sound/pci/hda/hda_local.h
+--- linux-2.6.29.owrt/sound/pci/hda/hda_local.h        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_local.h    2009-05-10 23:48:34.000000000 +0200
+@@ -251,8 +251,6 @@
+                                 unsigned int stream_tag,
+                                 unsigned int format,
+                                 struct snd_pcm_substream *substream);
+-int snd_hda_multi_out_dig_cleanup(struct hda_codec *codec,
+-                                struct hda_multi_out *mout);
+ int snd_hda_multi_out_analog_open(struct hda_codec *codec,
+                                 struct hda_multi_out *mout,
+                                 struct snd_pcm_substream *substream,
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/hda_proc.c linux-2.6.29-rc3.owrt/sound/pci/hda/hda_proc.c
+--- linux-2.6.29.owrt/sound/pci/hda/hda_proc.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/hda_proc.c     2009-05-10 23:48:34.000000000 +0200
+@@ -399,8 +399,7 @@
+ {
+       int c, curr = -1;
+-      if (conn_len > 1 && wid_type != AC_WID_AUD_MIX &&
+-          wid_type != AC_WID_VOL_KNB)
++      if (conn_len > 1 && wid_type != AC_WID_AUD_MIX)
+               curr = snd_hda_codec_read(codec, nid, 0,
+                                         AC_VERB_GET_CONNECT_SEL, 0);
+       snd_iprintf(buffer, "  Connection: %d\n", conn_len);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/patch_analog.c linux-2.6.29-rc3.owrt/sound/pci/hda/patch_analog.c
+--- linux-2.6.29.owrt/sound/pci/hda/patch_analog.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/patch_analog.c 2009-05-10 23:48:34.000000000 +0200
+@@ -275,14 +275,6 @@
+                                            format, substream);
+ }
+-static int ad198x_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+-                                         struct hda_codec *codec,
+-                                         struct snd_pcm_substream *substream)
+-{
+-      struct ad198x_spec *spec = codec->spec;
+-      return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
+-}
+-
+ /*
+  * Analog capture
+  */
+@@ -341,8 +333,7 @@
+       .ops = {
+               .open = ad198x_dig_playback_pcm_open,
+               .close = ad198x_dig_playback_pcm_close,
+-              .prepare = ad198x_dig_playback_pcm_prepare,
+-              .cleanup = ad198x_dig_playback_pcm_cleanup
++              .prepare = ad198x_dig_playback_pcm_prepare
+       },
+ };
+@@ -1894,8 +1885,8 @@
+ #define AD1988_SPDIF_OUT_HDMI 0x0b
+ #define AD1988_SPDIF_IN               0x07
+-static hda_nid_t ad1989b_slave_dig_outs[] = {
+-      AD1988_SPDIF_OUT, AD1988_SPDIF_OUT_HDMI, 0
++static hda_nid_t ad1989b_slave_dig_outs[2] = {
++      AD1988_SPDIF_OUT, AD1988_SPDIF_OUT_HDMI
+ };
+ static struct hda_input_mux ad1988_6stack_capture_source = {
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/patch_conexant.c linux-2.6.29-rc3.owrt/sound/pci/hda/patch_conexant.c
+--- linux-2.6.29.owrt/sound/pci/hda/patch_conexant.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/patch_conexant.c       2009-05-10 23:48:34.000000000 +0200
+@@ -347,7 +347,6 @@
+                                    &spec->cur_mux[adc_idx]);
+ }
+-#ifdef CONFIG_SND_JACK
+ static int conexant_add_jack(struct hda_codec *codec,
+               hda_nid_t nid, int type)
+ {
+@@ -395,6 +394,7 @@
+ static int conexant_init_jacks(struct hda_codec *codec)
+ {
++#ifdef CONFIG_SND_JACK
+       struct conexant_spec *spec = codec->spec;
+       int i;
+@@ -422,19 +422,10 @@
+                       ++hv;
+               }
+       }
++#endif
+       return 0;
+ }
+-#else
+-static inline void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
+-{
+-}
+-
+-static inline int conexant_init_jacks(struct hda_codec *codec)
+-{
+-      return 0;
+-}
+-#endif
+ static int conexant_init(struct hda_codec *codec)
+ {
+@@ -1575,7 +1566,6 @@
+       SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP),
+       SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP),
+       SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP),
+-      SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6700", CXT5047_LAPTOP),
+       SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD),
+       {}
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/patch_intelhdmi.c linux-2.6.29-rc3.owrt/sound/pci/hda/patch_intelhdmi.c
+--- linux-2.6.29.owrt/sound/pci/hda/patch_intelhdmi.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/patch_intelhdmi.c      2009-05-10 23:48:34.000000000 +0200
+@@ -49,6 +49,11 @@
+       {} /* terminator */
+ };
++static struct hda_verb pinout_disable_verb[] = {
++      {PIN_NID, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00},
++      {}
++};
++
+ static struct hda_verb unsolicited_response_verb[] = {
+       {PIN_NID, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN |
+                                                 INTEL_HDMI_EVENT_TAG},
+@@ -243,6 +248,10 @@
+ static void hdmi_enable_output(struct hda_codec *codec)
+ {
++      /* Enable Audio InfoFrame Transmission */
++      hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
++      snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
++                                              AC_DIPXMIT_BEST);
+       /* Unmute */
+       if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
+               snd_hda_codec_write(codec, PIN_NID, 0,
+@@ -251,24 +260,17 @@
+       snd_hda_sequence_write(codec, pinout_enable_verb);
+ }
+-/*
+- * Enable Audio InfoFrame Transmission
+- */
+-static void hdmi_start_infoframe_trans(struct hda_codec *codec)
++static void hdmi_disable_output(struct hda_codec *codec)
+ {
+-      hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+-      snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+-                                              AC_DIPXMIT_BEST);
+-}
++      snd_hda_sequence_write(codec, pinout_disable_verb);
++      if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
++              snd_hda_codec_write(codec, PIN_NID, 0,
++                              AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+-/*
+- * Disable Audio InfoFrame Transmission
+- */
+-static void hdmi_stop_infoframe_trans(struct hda_codec *codec)
+-{
+-      hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+-      snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+-                                              AC_DIPXMIT_DISABLE);
++      /*
++       * FIXME: noises may arise when playing music after reloading the
++       * kernel module, until the next X restart or monitor repower.
++       */
+ }
+ static int hdmi_get_channel_count(struct hda_codec *codec)
+@@ -366,16 +368,11 @@
+                                       struct hdmi_audio_infoframe *ai)
+ {
+       u8 *params = (u8 *)ai;
+-      u8 sum = 0;
+       int i;
+       hdmi_debug_dip_size(codec);
+       hdmi_clear_dip_buffers(codec); /* be paranoid */
+-      for (i = 0; i < sizeof(ai); i++)
+-              sum += params[i];
+-      ai->checksum = - sum;
+-
+       hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+       for (i = 0; i < sizeof(ai); i++)
+               hdmi_write_dip_byte(codec, PIN_NID, params[i]);
+@@ -422,16 +419,12 @@
+       /*
+        * CA defaults to 0 for basic stereo audio
+        */
+-      if (channels <= 2)
++      if (!eld->eld_ver)
+               return 0;
+-
+-      /*
+-       * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+-       * in console or for audio devices. Assume the highest speakers
+-       * configuration, to _not_ prohibit multi-channel audio playback.
+-       */
+       if (!eld->spk_alloc)
+-              eld->spk_alloc = 0xffff;
++              return 0;
++      if (channels <= 2)
++              return 0;
+       /*
+        * expand ELD's speaker allocation mask
+@@ -492,7 +485,6 @@
+       hdmi_setup_channel_mapping(codec, &ai);
+       hdmi_fill_audio_infoframe(codec, &ai);
+-      hdmi_start_infoframe_trans(codec);
+ }
+@@ -570,7 +562,7 @@
+ {
+       struct intel_hdmi_spec *spec = codec->spec;
+-      hdmi_stop_infoframe_trans(codec);
++      hdmi_disable_output(codec);
+       return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+ }
+@@ -590,6 +582,8 @@
+       hdmi_setup_audio_infoframe(codec, substream);
++      hdmi_enable_output(codec);
++
+       return 0;
+ }
+@@ -634,7 +628,8 @@
+ static int intel_hdmi_init(struct hda_codec *codec)
+ {
+-      hdmi_enable_output(codec);
++      /* disable audio output as early as possible */
++      hdmi_disable_output(codec);
+       snd_hda_sequence_write(codec, unsolicited_response_verb);
+@@ -684,7 +679,6 @@
+       { .id = 0x80862801, .name = "G45 DEVBLC", .patch = patch_intel_hdmi },
+       { .id = 0x80862802, .name = "G45 DEVCTG", .patch = patch_intel_hdmi },
+       { .id = 0x80862803, .name = "G45 DEVELK", .patch = patch_intel_hdmi },
+-      { .id = 0x80862804, .name = "G45 DEVIBX", .patch = patch_intel_hdmi },
+       { .id = 0x10951392, .name = "SiI1392 HDMI",     .patch = patch_intel_hdmi },
+       {} /* terminator */
+ };
+@@ -693,7 +687,6 @@
+ MODULE_ALIAS("snd-hda-codec-id:80862801");
+ MODULE_ALIAS("snd-hda-codec-id:80862802");
+ MODULE_ALIAS("snd-hda-codec-id:80862803");
+-MODULE_ALIAS("snd-hda-codec-id:80862804");
+ MODULE_ALIAS("snd-hda-codec-id:10951392");
+ MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/patch_realtek.c linux-2.6.29-rc3.owrt/sound/pci/hda/patch_realtek.c
+--- linux-2.6.29.owrt/sound/pci/hda/patch_realtek.c    2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/patch_realtek.c        2009-05-10 23:48:34.000000000 +0200
+@@ -1037,7 +1037,6 @@
+               case 0x10ec0267:
+               case 0x10ec0268:
+               case 0x10ec0269:
+-              case 0x10ec0272:
+               case 0x10ec0660:
+               case 0x10ec0662:
+               case 0x10ec0663:
+@@ -1066,7 +1065,6 @@
+               case 0x10ec0882:
+               case 0x10ec0883:
+               case 0x10ec0885:
+-              case 0x10ec0887:
+               case 0x10ec0889:
+                       snd_hda_codec_write(codec, 0x20, 0,
+                                           AC_VERB_SET_COEF_INDEX, 7);
+@@ -7014,15 +7012,12 @@
+                       break;
+               case 0x106b1000: /* iMac 24 */
+               case 0x106b2800: /* AppleTV */
+-              case 0x106b3e00: /* iMac 24 Aluminium */
+                       board_config = ALC885_IMAC24;
+                       break;
+-              case 0x106b00a0: /* MacBookPro3,1 - Another revision */
+               case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
+               case 0x106b00a4: /* MacbookPro4,1 */
+               case 0x106b2c00: /* Macbook Pro rev3 */
+               case 0x106b3600: /* Macbook 3.1 */
+-              case 0x106b3800: /* MacbookPro4,1 - latter revision */
+                       board_config = ALC885_MBP3;
+                       break;
+               default:
+@@ -8470,8 +8465,6 @@
+               ALC888_ACER_ASPIRE_4930G),
+       SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
+               ALC888_ACER_ASPIRE_4930G),
+-      SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
+-              ALC888_ACER_ASPIRE_4930G),
+       SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
+       SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
+       SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
+@@ -8481,7 +8474,6 @@
+       SND_PCI_QUIRK(0x103c, 0x2a66, "HP Acacia", ALC888_3ST_HP),
+       SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
+       SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+-      SND_PCI_QUIRK(0x1043, 0x8284, "Asus Z37E", ALC883_6ST_DIG),
+       SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q),
+       SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
+       SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
+@@ -8521,8 +8513,6 @@
+       SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD),
+       SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
+       SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
+-      SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+-                    ALC883_FUJITSU_PI2515),
+       SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
+       SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+               ALC888_FUJITSU_XA3530),
+@@ -10557,7 +10547,6 @@
+       SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
+       SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
+       SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+-      SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC),
+       SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
+       SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
+       SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/hda/patch_sigmatel.c linux-2.6.29-rc3.owrt/sound/pci/hda/patch_sigmatel.c
+--- linux-2.6.29.owrt/sound/pci/hda/patch_sigmatel.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/hda/patch_sigmatel.c       2009-05-10 23:48:34.000000000 +0200
+@@ -1207,7 +1207,7 @@
+       "LFE Playback Volume",
+       "Side Playback Volume",
+       "Headphone Playback Volume",
+-      "Headphone2 Playback Volume",
++      "Headphone Playback Volume",
+       "Speaker Playback Volume",
+       "External Speaker Playback Volume",
+       "Speaker2 Playback Volume",
+@@ -1221,7 +1221,7 @@
+       "LFE Playback Switch",
+       "Side Playback Switch",
+       "Headphone Playback Switch",
+-      "Headphone2 Playback Switch",
++      "Headphone Playback Switch",
+       "Speaker Playback Switch",
+       "External Speaker Playback Switch",
+       "Speaker2 Playback Switch",
+@@ -1799,13 +1799,11 @@
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2,
+                     "HP dv5", STAC_HP_M4),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
+-                    "HP dv7", STAC_HP_DV5),
++                    "HP dv7", STAC_HP_M4),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7,
+                     "HP dv4", STAC_HP_DV5),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
+                     "HP dv7", STAC_HP_M4),
+-      SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3600,
+-                    "HP dv5", STAC_HP_DV5),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
+                     "HP dv5", STAC_HP_DV5),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
+@@ -2442,14 +2440,6 @@
+                                            stream_tag, format, substream);
+ }
+-static int stac92xx_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+-                                      struct hda_codec *codec,
+-                                      struct snd_pcm_substream *substream)
+-{
+-      struct sigmatel_spec *spec = codec->spec;
+-      return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
+-}
+-
+ /*
+  * Analog capture callbacks
+@@ -2494,8 +2484,7 @@
+       .ops = {
+               .open = stac92xx_dig_playback_pcm_open,
+               .close = stac92xx_dig_playback_pcm_close,
+-              .prepare = stac92xx_dig_playback_pcm_prepare,
+-              .cleanup = stac92xx_dig_playback_pcm_cleanup
++              .prepare = stac92xx_dig_playback_pcm_prepare
+       },
+ };
+@@ -2550,8 +2539,6 @@
+       info->name = "STAC92xx Analog";
+       info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_playback;
+-      info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
+-              spec->multiout.dac_nids[0];
+       info->stream[SNDRV_PCM_STREAM_CAPTURE] = stac92xx_pcm_analog_capture;
+       info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
+       info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_adcs;
+@@ -3516,7 +3503,6 @@
+       if (! spec->autocfg.line_outs)
+               return 0; /* can't find valid pin config */
+-#if 0 /* FIXME: temporarily disabled */
+       /* If we have no real line-out pin and multiple hp-outs, HPs should
+        * be set up as multi-channel outputs.
+        */
+@@ -3536,7 +3522,6 @@
+               spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
+               spec->autocfg.hp_outs = 0;
+       }
+-#endif /* FIXME: temporarily disabled */
+       if (spec->autocfg.mono_out_pin) {
+               int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
+                       (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
+@@ -4991,7 +4976,7 @@
+       case STAC_DELL_M4_3:
+               spec->num_dmics = 1;
+               spec->num_smuxes = 0;
+-              spec->num_dmuxes = 1;
++              spec->num_dmuxes = 0;
+               break;
+       default:
+               spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/intel8x0.c linux-2.6.29-rc3.owrt/sound/pci/intel8x0.c
+--- linux-2.6.29.owrt/sound/pci/intel8x0.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/intel8x0.c 2009-05-10 23:48:34.000000000 +0200
+@@ -617,7 +617,7 @@
+       int time = 100;
+       if (chip->buggy_semaphore)
+               return 0; /* just ignore ... */
+-      while (--time && (igetdword(chip, ICHREG(ALI_CAS)) & ALI_CAS_SEM_BUSY))
++      while (time-- && (igetdword(chip, ICHREG(ALI_CAS)) & ALI_CAS_SEM_BUSY))
+               udelay(1);
+       if (! time && ! chip->in_ac97_init)
+               snd_printk(KERN_WARNING "ali_codec_semaphore timeout\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/mixart/mixart.c linux-2.6.29-rc3.owrt/sound/pci/mixart/mixart.c
+--- linux-2.6.29.owrt/sound/pci/mixart/mixart.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/mixart/mixart.c    2009-05-10 23:48:34.000000000 +0200
+@@ -607,7 +607,6 @@
+       /* set the format to the board */
+       err = mixart_set_format(stream, format);
+       if(err < 0) {
+-              mutex_unlock(&mgr->setup_mutex);
+               return err;
+       }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/oxygen/virtuoso.c linux-2.6.29-rc3.owrt/sound/pci/oxygen/virtuoso.c
+--- linux-2.6.29.owrt/sound/pci/oxygen/virtuoso.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/oxygen/virtuoso.c  2009-05-10 23:48:34.000000000 +0200
+@@ -26,7 +26,7 @@
+  * SPI 0 -> 1st PCM1796 (front)
+  * SPI 1 -> 2nd PCM1796 (surround)
+  * SPI 2 -> 3rd PCM1796 (center/LFE)
+- * SPI 4 -> 4th PCM1796 (back)
++ * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
+  *
+  * GPIO 2 -> M0 of CS5381
+  * GPIO 3 -> M1 of CS5381
+@@ -207,6 +207,12 @@
+ static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
+                                    u8 reg, u8 value)
+ {
++      /*
++       * We don't want to do writes on SPI 4 because the EEPROM, which shares
++       * the same pin, might get confused and broken.  We'd better take care
++       * that the driver works with the default register values ...
++       */
++#if 0
+       /* maps ALSA channel pair number to SPI output */
+       static const u8 codec_map[4] = {
+               0, 1, 2, 4
+@@ -217,6 +223,7 @@
+                        (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
+                        OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
+                        (reg << 8) | value);
++#endif
+ }
+ static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
+@@ -750,6 +757,9 @@
+ static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
+ {
++      if (!strncmp(template->name, "Master Playback ", 16))
++              /* disable volume/mute because they would require SPI writes */
++              return 1;
+       if (!strncmp(template->name, "CD Capture ", 11))
+               /* CD in is actually connected to the video in pin */
+               template->private_value ^= AC97_CD ^ AC97_VIDEO;
+@@ -840,9 +850,8 @@
+       .dac_volume_min = 0x0f,
+       .dac_volume_max = 0xff,
+       .misc_flags = OXYGEN_MISC_MIDI,
+-      .function_flags = OXYGEN_FUNCTION_SPI |
+-                        OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+-      .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
++      .function_flags = OXYGEN_FUNCTION_SPI,
++      .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
+       .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/pci/pcxhr/pcxhr.h linux-2.6.29-rc3.owrt/sound/pci/pcxhr/pcxhr.h
+--- linux-2.6.29.owrt/sound/pci/pcxhr/pcxhr.h  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/pci/pcxhr/pcxhr.h      2009-05-10 23:48:34.000000000 +0200
+@@ -97,12 +97,12 @@
+       int capture_chips;
+       int fw_file_set;
+       int firmware_num;
+-      unsigned int is_hr_stereo:1;
+-      unsigned int board_has_aes1:1;  /* if 1 board has AES1 plug and SRC */
+-      unsigned int board_has_analog:1; /* if 0 the board is digital only */
+-      unsigned int board_has_mic:1; /* if 1 the board has microphone input */
+-      unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
+-      unsigned int mono_capture:1; /* if 1 the board does mono capture */
++      int is_hr_stereo:1;
++      int board_has_aes1:1;   /* if 1 board has AES1 plug and SRC */
++      int board_has_analog:1; /* if 0 the board is digital only */
++      int board_has_mic:1;    /* if 1 the board has microphone input */
++      int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
++      int mono_capture:1;     /* if 1 the board does mono capture */
+       struct snd_dma_buffer hostport;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/atmel/atmel_ssc_dai.c linux-2.6.29-rc3.owrt/sound/soc/atmel/atmel_ssc_dai.c
+--- linux-2.6.29.owrt/sound/soc/atmel/atmel_ssc_dai.c  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/atmel/atmel_ssc_dai.c      2009-05-10 23:48:34.000000000 +0200
+@@ -10,7 +10,7 @@
+  * Based on at91-ssc.c by
+  * Frank Mandarino <fmandarino@endrelia.com>
+  * Based on pxa2xx Platform drivers by
+- * Liam Girdwood <lrg@slimlogic.co.uk>
++ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/atmel/atmel_ssc_dai.h linux-2.6.29-rc3.owrt/sound/soc/atmel/atmel_ssc_dai.h
+--- linux-2.6.29.owrt/sound/soc/atmel/atmel_ssc_dai.h  2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/atmel/atmel_ssc_dai.h      2009-05-10 23:48:34.000000000 +0200
+@@ -10,7 +10,7 @@
+  * Based on at91-ssc.c by
+  * Frank Mandarino <fmandarino@endrelia.com>
+  * Based on pxa2xx Platform drivers by
+- * Liam Girdwood <lrg@slimlogic.co.uk>
++ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/codecs/tlv320aic3x.c linux-2.6.29-rc3.owrt/sound/soc/codecs/tlv320aic3x.c
+--- linux-2.6.29.owrt/sound/soc/codecs/tlv320aic3x.c   2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/codecs/tlv320aic3x.c       2009-05-10 23:48:34.000000000 +0200
+@@ -165,13 +165,10 @@
+                                       struct snd_ctl_elem_value *ucontrol)
+ {
+       struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+-      struct soc_mixer_control *mc =
+-              (struct soc_mixer_control *)kcontrol->private_value;
+-      unsigned int reg = mc->reg;
+-      unsigned int shift = mc->shift;
+-      int max = mc->max;
+-      unsigned int mask = (1 << fls(max)) - 1;
+-      unsigned int invert = mc->invert;
++      int reg = kcontrol->private_value & 0xff;
++      int shift = (kcontrol->private_value >> 8) & 0x0f;
++      int mask = (kcontrol->private_value >> 16) & 0xff;
++      int invert = (kcontrol->private_value >> 24) & 0x01;
+       unsigned short val, val_mask;
+       int ret;
+       struct snd_soc_dapm_path *path;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/codecs/wm8350.c linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8350.c
+--- linux-2.6.29.owrt/sound/soc/codecs/wm8350.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8350.c    2009-05-10 23:48:34.000000000 +0200
+@@ -3,7 +3,7 @@
+  *
+  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+  *
+- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
++ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/codecs/wm8753.c linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.c
+--- linux-2.6.29.owrt/sound/soc/codecs/wm8753.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.c    2009-05-10 23:48:34.000000000 +0200
+@@ -1451,14 +1451,7 @@
+ },
+ };
+-struct snd_soc_dai wm8753_dai[] = {
+-      {
+-              .name = "WM8753 DAI 0",
+-      },
+-      {
+-              .name = "WM8753 DAI 1",
+-      },
+-};
++struct snd_soc_dai wm8753_dai[2];
+ EXPORT_SYMBOL_GPL(wm8753_dai);
+ static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/codecs/wm8990.c linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8990.c
+--- linux-2.6.29.owrt/sound/soc/codecs/wm8990.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8990.c    2009-05-10 23:48:34.000000000 +0200
+@@ -2,7 +2,8 @@
+  * wm8990.c  --  WM8990 ALSA Soc Audio driver
+  *
+  * Copyright 2008 Wolfson Microelectronics PLC.
+- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
++ * Author: Liam Girdwood
++ *         lg@opensource.wolfsonmicro.com or linux@wolfsonmicro.com
+  *
+  *  This program is free software; you can redistribute  it and/or modify it
+  *  under  the terms of  the GNU General  Public License as published by the
+@@ -176,9 +177,7 @@
+       struct snd_ctl_elem_value *ucontrol)
+ {
+       struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+-      struct soc_mixer_control *mc =
+-              (struct soc_mixer_control *)kcontrol->private_value;
+-      int reg = mc->reg;
++      int reg = kcontrol->private_value & 0xff;
+       int ret;
+       u16 val;
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/omap/omap-mcbsp.c linux-2.6.29-rc3.owrt/sound/soc/omap/omap-mcbsp.c
+--- linux-2.6.29.owrt/sound/soc/omap/omap-mcbsp.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/omap/omap-mcbsp.c  2009-05-10 23:48:34.000000000 +0200
+@@ -302,10 +302,6 @@
+       regs->spcr1     |= RINTM(3);
+       regs->rcr2      |= RFIG;
+       regs->xcr2      |= XFIG;
+-      if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+-              regs->xccr = DXENDLY(1) | XDMAEN;
+-              regs->rccr = RFULL_CYCLE | RDMAEN;
+-      }
+       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+       case SND_SOC_DAIFMT_I2S:
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/omap/omap-pcm.c linux-2.6.29-rc3.owrt/sound/soc/omap/omap-pcm.c
+--- linux-2.6.29.owrt/sound/soc/omap/omap-pcm.c        2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/omap/omap-pcm.c    2009-05-10 23:48:34.000000000 +0200
+@@ -175,10 +175,9 @@
+ {
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct omap_runtime_data *prtd = runtime->private_data;
+-      unsigned long flags;
+       int ret = 0;
+-      spin_lock_irqsave(&prtd->lock, flags);
++      spin_lock_irq(&prtd->lock);
+       switch (cmd) {
+       case SNDRV_PCM_TRIGGER_START:
+       case SNDRV_PCM_TRIGGER_RESUME:
+@@ -196,7 +195,7 @@
+       default:
+               ret = -EINVAL;
+       }
+-      spin_unlock_irqrestore(&prtd->lock, flags);
++      spin_unlock_irq(&prtd->lock);
+       return ret;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/omap/sdp3430.c linux-2.6.29-rc3.owrt/sound/soc/omap/sdp3430.c
+--- linux-2.6.29.owrt/sound/soc/omap/sdp3430.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/omap/sdp3430.c     2009-05-10 23:48:34.000000000 +0200
+@@ -91,7 +91,7 @@
+ };
+ /* Audio machine driver */
+-static struct snd_soc_card snd_soc_sdp3430 = {
++static struct snd_soc_machine snd_soc_machine_sdp3430 = {
+       .name = "SDP3430",
+       .platform = &omap_soc_platform,
+       .dai_link = &sdp3430_dai,
+@@ -100,7 +100,7 @@
+ /* Audio subsystem */
+ static struct snd_soc_device sdp3430_snd_devdata = {
+-      .card = &snd_soc_sdp3430,
++      .machine = &snd_soc_machine_sdp3430,
+       .codec_dev = &soc_codec_dev_twl4030,
+ };
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/soc/soc-core.c linux-2.6.29-rc3.owrt/sound/soc/soc-core.c
+--- linux-2.6.29.owrt/sound/soc/soc-core.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/soc/soc-core.c 2009-05-10 23:48:34.000000000 +0200
+@@ -1385,10 +1385,7 @@
+       mutex_lock(&codec->mutex);
+ #ifdef CONFIG_SND_SOC_AC97_BUS
+-      /* Only instantiate AC97 if not already done by the adaptor
+-       * for the generic AC97 subsystem.
+-       */
+-      if (ac97 && strcmp(codec->name, "AC97") != 0) {
++      if (ac97) {
+               ret = soc_ac97_dev_register(codec);
+               if (ret < 0) {
+                       printk(KERN_ERR "asoc: AC97 device register failed\n");
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/usb/usbaudio.c linux-2.6.29-rc3.owrt/sound/usb/usbaudio.c
+--- linux-2.6.29.owrt/sound/usb/usbaudio.c     2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/usb/usbaudio.c 2009-05-10 23:48:34.000000000 +0200
+@@ -2524,6 +2524,7 @@
+                * build the rate table and bitmap flags
+                */
+               int r, idx;
++              unsigned int nonzero_rates = 0;
+               fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+               if (fp->rate_table == NULL) {
+@@ -2531,27 +2532,24 @@
+                       return -1;
+               }
+-              fp->nr_rates = 0;
+-              fp->rate_min = fp->rate_max = 0;
++              fp->nr_rates = nr_rates;
++              fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
+               for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
+                       unsigned int rate = combine_triple(&fmt[idx]);
+-                      if (!rate)
+-                              continue;
+                       /* C-Media CM6501 mislabels its 96 kHz altsetting */
+                       if (rate == 48000 && nr_rates == 1 &&
+-                          (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
+-                           chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
++                          chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+                           fp->altsetting == 5 && fp->maxpacksize == 392)
+                               rate = 96000;
+-                      fp->rate_table[fp->nr_rates] = rate;
+-                      if (!fp->rate_min || rate < fp->rate_min)
++                      fp->rate_table[r] = rate;
++                      nonzero_rates |= rate;
++                      if (rate < fp->rate_min)
+                               fp->rate_min = rate;
+-                      if (!fp->rate_max || rate > fp->rate_max)
++                      else if (rate > fp->rate_max)
+                               fp->rate_max = rate;
+                       fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+-                      fp->nr_rates++;
+               }
+-              if (!fp->nr_rates) {
++              if (!nonzero_rates) {
+                       hwc_debug("All rates were zero. Skipping format!\n");
+                       return -1;
+               }
+@@ -2968,7 +2966,6 @@
+               return -EINVAL;
+       }
+       alts = &iface->altsetting[fp->altset_idx];
+-      fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+       usb_set_interface(chip->dev, fp->iface, 0);
+       init_usb_pitch(chip->dev, fp->iface, alts, fp);
+       init_usb_sample_rate(chip->dev, fp->iface, alts, fp, fp->rate_max);
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/sound/usb/usbmidi.c linux-2.6.29-rc3.owrt/sound/usb/usbmidi.c
+--- linux-2.6.29.owrt/sound/usb/usbmidi.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/sound/usb/usbmidi.c  2009-05-10 23:48:34.000000000 +0200
+@@ -1625,7 +1625,6 @@
+       }
+       ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+-      ep_info.out_interval = 0;
+       ep_info.out_cables = endpoint->out_cables & 0x5555;
+       err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
+       if (err < 0)
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/virt/kvm/iommu.c linux-2.6.29-rc3.owrt/virt/kvm/iommu.c
+--- linux-2.6.29.owrt/virt/kvm/iommu.c 2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/virt/kvm/iommu.c     2009-05-10 23:48:34.000000000 +0200
+@@ -73,13 +73,14 @@
+ {
+       int i, r = 0;
++      down_read(&kvm->slots_lock);
+       for (i = 0; i < kvm->nmemslots; i++) {
+               r = kvm_iommu_map_pages(kvm, kvm->memslots[i].base_gfn,
+                                       kvm->memslots[i].npages);
+               if (r)
+                       break;
+       }
+-
++      up_read(&kvm->slots_lock);
+       return r;
+ }
+@@ -189,11 +190,12 @@
+ static int kvm_iommu_unmap_memslots(struct kvm *kvm)
+ {
+       int i;
+-
++      down_read(&kvm->slots_lock);
+       for (i = 0; i < kvm->nmemslots; i++) {
+               kvm_iommu_put_pages(kvm, kvm->memslots[i].base_gfn,
+                                   kvm->memslots[i].npages);
+       }
++      up_read(&kvm->slots_lock);
+       return 0;
+ }
+diff -ruN --exclude='*.rej' --exclude='*.orig' linux-2.6.29.owrt/virt/kvm/kvm_main.c linux-2.6.29-rc3.owrt/virt/kvm/kvm_main.c
+--- linux-2.6.29.owrt/virt/kvm/kvm_main.c      2009-05-10 22:04:39.000000000 +0200
++++ linux-2.6.29-rc3.owrt/virt/kvm/kvm_main.c  2009-05-10 23:48:34.000000000 +0200
+@@ -173,6 +173,7 @@
+               assigned_dev->host_irq_disabled = false;
+       }
+       mutex_unlock(&assigned_dev->kvm->lock);
++      kvm_put_kvm(assigned_dev->kvm);
+ }
+ static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
+@@ -180,6 +181,8 @@
+       struct kvm_assigned_dev_kernel *assigned_dev =
+               (struct kvm_assigned_dev_kernel *) dev_id;
++      kvm_get_kvm(assigned_dev->kvm);
++
+       schedule_work(&assigned_dev->interrupt_work);
+       disable_irq_nosync(irq);
+@@ -210,7 +213,6 @@
+       }
+ }
+-/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
+ static void kvm_free_assigned_irq(struct kvm *kvm,
+                                 struct kvm_assigned_dev_kernel *assigned_dev)
+ {
+@@ -226,24 +228,11 @@
+       if (!assigned_dev->irq_requested_type)
+               return;
+-      /*
+-       * In kvm_free_device_irq, cancel_work_sync return true if:
+-       * 1. work is scheduled, and then cancelled.
+-       * 2. work callback is executed.
+-       *
+-       * The first one ensured that the irq is disabled and no more events
+-       * would happen. But for the second one, the irq may be enabled (e.g.
+-       * for MSI). So we disable irq here to prevent further events.
+-       *
+-       * Notice this maybe result in nested disable if the interrupt type is
+-       * INTx, but it's OK for we are going to free it.
+-       *
+-       * If this function is a part of VM destroy, please ensure that till
+-       * now, the kvm state is still legal for probably we also have to wait
+-       * interrupt_work done.
+-       */
+-      disable_irq_nosync(assigned_dev->host_irq);
+-      cancel_work_sync(&assigned_dev->interrupt_work);
++      if (cancel_work_sync(&assigned_dev->interrupt_work))
++              /* We had pending work. That means we will have to take
++               * care of kvm_put_kvm.
++               */
++              kvm_put_kvm(kvm);
+       free_irq(assigned_dev->host_irq, (void *)assigned_dev);
+@@ -296,8 +285,8 @@
+       if (irqchip_in_kernel(kvm)) {
+               if (!msi2intx &&
+-                  (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) {
+-                      free_irq(adev->host_irq, (void *)adev);
++                  adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) {
++                      free_irq(adev->host_irq, (void *)kvm);
+                       pci_disable_msi(adev->dev);
+               }
+@@ -466,7 +455,6 @@
+       struct kvm_assigned_dev_kernel *match;
+       struct pci_dev *dev;
+-      down_read(&kvm->slots_lock);
+       mutex_lock(&kvm->lock);
+       match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+@@ -528,7 +516,6 @@
+ out:
+       mutex_unlock(&kvm->lock);
+-      up_read(&kvm->slots_lock);
+       return r;
+ out_list_del:
+       list_del(&match->list);
+@@ -540,7 +527,6 @@
+ out_free:
+       kfree(match);
+       mutex_unlock(&kvm->lock);
+-      up_read(&kvm->slots_lock);
+       return r;
+ }
+ #endif
+@@ -803,19 +789,11 @@
+       return young;
+ }
+-static void kvm_mmu_notifier_release(struct mmu_notifier *mn,
+-                                   struct mm_struct *mm)
+-{
+-      struct kvm *kvm = mmu_notifier_to_kvm(mn);
+-      kvm_arch_flush_shadow(kvm);
+-}
+-
+ static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
+       .invalidate_page        = kvm_mmu_notifier_invalidate_page,
+       .invalidate_range_start = kvm_mmu_notifier_invalidate_range_start,
+       .invalidate_range_end   = kvm_mmu_notifier_invalidate_range_end,
+       .clear_flush_young      = kvm_mmu_notifier_clear_flush_young,
+-      .release                = kvm_mmu_notifier_release,
+ };
+ #endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
+@@ -905,7 +883,6 @@
+ {
+       struct mm_struct *mm = kvm->mm;
+-      kvm_arch_sync_events(kvm);
+       spin_lock(&kvm_lock);
+       list_del(&kvm->vm_list);
+       spin_unlock(&kvm_lock);
diff --git a/target/linux/s3c24xx/patches-2.6.29/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.29/001-merge-openmoko.patch
new file mode 100644 (file)
index 0000000..59ce604
--- /dev/null
@@ -0,0 +1,96426 @@
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/include/asm/fiq.h linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/fiq.h
+--- linux-2.6.29-rc3.owrt/arch/arm/include/asm/fiq.h   2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/fiq.h        2009-05-10 22:27:59.000000000 +0200
+@@ -29,8 +29,9 @@
+ extern int claim_fiq(struct fiq_handler *f);
+ extern void release_fiq(struct fiq_handler *f);
+ extern void set_fiq_handler(void *start, unsigned int length);
+-extern void set_fiq_regs(struct pt_regs *regs);
+-extern void get_fiq_regs(struct pt_regs *regs);
++extern void set_fiq_c_handler(void (*handler)(void));
++extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
++extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
+ extern void enable_fiq(int fiq);
+ extern void disable_fiq(int fiq);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/include/asm/hardware/tzic-sp890.h linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/hardware/tzic-sp890.h
+--- linux-2.6.29-rc3.owrt/arch/arm/include/asm/hardware/tzic-sp890.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/hardware/tzic-sp890.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,22 @@
++#ifndef __SP890_TZIC_H__
++#define __SP890_TZIC_H__
++
++#define SP890_TZIC_UNLOCK_MAGIC (0x0ACCE550)
++
++#define SP890_TZIC_FIQSTATUS  0
++#define SP890_TZIC_RAWINTR    4
++#define SP890_TZIC_INTSELECT  8
++#define SP890_TZIC_FIQENABLE  0xc
++#define SP890_TZIC_FIQENCLEAR 0x10
++#define SP890_TZIC_FIQBYPASS  0x14
++#define SP890_TZIC_PROTECTION 0x18
++#define SP890_TZIC_LOCK               0x1c
++#define SP890_TZIC_LOCKSTATUS 0x20
++#define SP890_TZIC_ITCR               0x300
++#define SP890_TZIC_ITIP1      0x304
++#define SP890_TZIC_ITIP2      0x308
++#define SP890_TZIC_ITOP1      0x30c
++#define SP890_TZIC_ITOP2      0x310
++#define SP890_TZIC_PERIPHIDO  0xfe0
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/include/asm/irqflags.h linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/irqflags.h
+--- linux-2.6.29-rc3.owrt/arch/arm/include/asm/irqflags.h      2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/irqflags.h   2009-05-10 22:27:59.000000000 +0200
+@@ -5,6 +5,16 @@
+ #include <asm/ptrace.h>
++#ifdef CONFIG_FIND_IRQ_BLOCKERS
++void iblock_start(void);
++void iblock_end(void);
++void iblock_end_maybe(unsigned long flags);
++#else
++#define iblock_start()
++#define iblock_end()
++#define iblock_end_maybe(x)
++#endif
++
+ /*
+  * CPU interrupt mask handling.
+  */
+@@ -31,6 +41,7 @@
+ #define raw_local_irq_save(x)                                 \
+       ({                                                      \
+               unsigned long temp;                             \
++      iblock_start(); \
+               (void) (&temp == &x);                           \
+       __asm__ __volatile__(                                   \
+       "mrs    %0, cpsr                @ local_irq_save\n"     \
+@@ -47,6 +58,7 @@
+ #define raw_local_irq_enable()                                        \
+       ({                                                      \
+               unsigned long temp;                             \
++       iblock_end(); \
+       __asm__ __volatile__(                                   \
+       "mrs    %0, cpsr                @ local_irq_enable\n"   \
+ "     bic     %0, %0, #128\n"                                 \
+@@ -62,6 +74,7 @@
+ #define raw_local_irq_disable()                                       \
+       ({                                                      \
+               unsigned long temp;                             \
++      iblock_start(); \
+       __asm__ __volatile__(                                   \
+       "mrs    %0, cpsr                @ local_irq_disable\n"  \
+ "     orr     %0, %0, #128\n"                                 \
+@@ -117,11 +130,12 @@
+  * restore saved IRQ & FIQ state
+  */
+ #define raw_local_irq_restore(x)                              \
++      ({ iblock_end_maybe(x); \
+       __asm__ __volatile__(                                   \
+       "msr    cpsr_c, %0              @ local_irq_restore\n"  \
+       :                                                       \
+       : "r" (x)                                               \
+-      : "memory", "cc")
++      : "memory", "cc"); })
+ #define raw_irqs_disabled_flags(flags)        \
+ ({                                    \
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/include/asm/kexec.h linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/kexec.h
+--- linux-2.6.29-rc3.owrt/arch/arm/include/asm/kexec.h 2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/include/asm/kexec.h      2009-05-10 22:27:59.000000000 +0200
+@@ -1,8 +1,6 @@
+ #ifndef _ARM_KEXEC_H
+ #define _ARM_KEXEC_H
+-#ifdef CONFIG_KEXEC
+-
+ /* Maximum physical address we can use pages from */
+ #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+ /* Maximum address we can reach in physical address mode */
+@@ -14,6 +12,10 @@
+ #define KEXEC_ARCH KEXEC_ARCH_ARM
++#define KEXEC_BOOT_PARAMS_SIZE 1536
++
++#ifdef CONFIG_KEXEC
++
+ #define KEXEC_ARM_ATAGS_OFFSET  0x1000
+ #define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
+@@ -29,3 +31,4 @@
+ #endif /* CONFIG_KEXEC */
+ #endif /* _ARM_KEXEC_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/Kconfig     2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/Kconfig  2009-05-10 22:27:59.000000000 +0200
+@@ -1086,7 +1086,8 @@
+ menu "CPU Power Management"
+-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
++if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA || \
++    ARCH_S3C64XX)
+ source "drivers/cpufreq/Kconfig"
+@@ -1126,6 +1127,10 @@
+       default y
+       select CPU_FREQ_DEFAULT_GOV_USERSPACE
++config CPU_FREQ_S3C64XX
++      bool "CPUfreq support for S3C64xx CPUs"
++      depends on CPU_FREQ && CPU_S3C6410
++
+ endif
+ source "drivers/cpuidle/Kconfig"
+@@ -1305,6 +1310,8 @@
+ source "drivers/uwb/Kconfig"
++source "drivers/ar6000/Kconfig"
++
+ source "drivers/mmc/Kconfig"
+ source "drivers/memstick/Kconfig"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/kernel/fiq.c linux-2.6.29-rc3.owrt.om/arch/arm/kernel/fiq.c
+--- linux-2.6.29-rc3.owrt/arch/arm/kernel/fiq.c        2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/kernel/fiq.c     2009-05-10 22:27:59.000000000 +0200
+@@ -8,6 +8,8 @@
+  *
+  *  FIQ support re-written by Russell King to be more generic
+  *
++ *  FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
++ *
+  * We now properly support a method by which the FIQ handlers can
+  * be stacked onto the vector.  We still do not support sharing
+  * the FIQ vector itself.
+@@ -124,6 +126,83 @@
+       : "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
+ }
++/* -------- FIQ handler in C ---------
++ *
++ * Major Caveats for using this
++ *  ---------------------------
++ *  *
++ *  * 1) it CANNOT touch any vmalloc()'d memory, only memory
++ *    that was kmalloc()'d.  Static allocations in the monolithic kernel
++ *    are kmalloc()'d so they are okay.  You can touch memory-mapped IO, but
++ *    the pointer for it has to have been stored in kmalloc'd memory.  The
++ *    reason for this is simple: every now and then Linux turns off interrupts
++ *    and reorders the paging tables.  If a FIQ happens during this time, the
++ *    virtual memory space can be partly or entirely disordered or missing.
++ *
++ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
++ *    ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module.  But the way
++ *    it is set up, you can all to enable and disable it from your module
++ *    and intercommunicate with it through struct fiq_ipc
++ *    fiq_ipc which you can define in
++ *    asm/archfiq_ipc_type.h.  The reason is the same as above, a
++ *    FIQ could happen while even the ISR is not present in virtual memory
++ *    space due to pagetables being changed at the time.
++ *
++ * 3) You can't call any Linux API code except simple macros
++ *    - understand that FIQ can come in at any time, no matter what
++ *      state of undress the kernel may privately be in, thinking it
++ *      locked the door by turning off interrupts... FIQ is an
++ *      unstoppable monster force (which is its value)
++ *    - they are not vmalloc()'d memory safe
++ *    - they might do crazy stuff like sleep: FIQ pisses fire and
++ *      is not interested in 'sleep' that the weak seem to need
++ *    - calling APIs from FIQ can re-enter un-renterable things
++ *    - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
++ *
++ * If you follow these rules, it is fantastic, an extremely powerful, solid,
++ * genuine hard realtime feature.
++ */
++
++static void (*current_fiq_c_isr)(void);
++#define FIQ_C_ISR_STACK_SIZE  256
++
++static void __attribute__((naked)) __jump_to_isr(void)
++{
++      asm __volatile__ ("mov pc, r8");
++}
++
++
++static void __attribute__((naked)) __actual_isr(void)
++{
++      asm __volatile__ (
++              "stmdb  sp!, {r0-r12, lr};"
++              "mov     fp, sp;"
++      );
++
++      current_fiq_c_isr();
++
++      asm __volatile__ (
++              "ldmia  sp!, {r0-r12, lr};"
++              "subs   pc, lr, #4;"
++      );
++}
++
++void set_fiq_c_handler(void (*isr)(void))
++{
++      struct pt_regs regs;
++
++      memset(&regs, 0, sizeof(regs));
++      regs.ARM_r8 = (unsigned long) __actual_isr;
++      regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
++
++      set_fiq_handler(__jump_to_isr, 4);
++
++      current_fiq_c_isr = isr;
++
++      set_fiq_regs(&regs);
++}
++/* -------- FIQ handler in C ---------*/
++
+ int claim_fiq(struct fiq_handler *f)
+ {
+       int ret = 0;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/kernel/iblock.c linux-2.6.29-rc3.owrt.om/arch/arm/kernel/iblock.c
+--- linux-2.6.29-rc3.owrt/arch/arm/kernel/iblock.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/kernel/iblock.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,158 @@
++/*
++ *
++ * /sys/kernel/iblock/
++ * All times are in microseconds (us).
++ *
++ * - limit
++ *   Interrupt blocking time reporting limit, in microseconds.
++ *   0 disables reporting. Auto-resets to zero after reporting.
++ *
++ * - max
++ *   Maximum blocking time recorded. Reset to zero by writing anything.
++ *
++ * - test
++ *   Force a delay with interrupts disabled.
++ *
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/sysfs.h>
++#include <linux/kobject.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <asm/irqflags.h>
++
++
++unsigned long s3c2410_gettimeoffset(void);
++
++
++static unsigned long iblock_t0;
++int iblock_limit;
++static int iblock_max;
++
++
++void iblock_start(void)
++{
++      unsigned long flags;
++
++      raw_local_save_flags(flags);
++      if (raw_irqs_disabled_flags(flags))
++              return;
++      iblock_t0 = s3c2410_gettimeoffset();
++}
++EXPORT_SYMBOL_GPL(iblock_start);
++
++void iblock_end(void)
++{
++      unsigned long flags;
++      unsigned long t, us;
++
++      raw_local_save_flags(flags);
++      if (!raw_irqs_disabled_flags(flags))
++              return;
++      if (!iblock_t0)
++              return;
++      t = s3c2410_gettimeoffset();
++      us = t-iblock_t0;
++      if (us > 40000000)
++              return;
++      if (us > iblock_max)
++              iblock_max = us;
++      if (!iblock_limit)
++              return;
++      if (us < iblock_limit)
++              return;
++//    iblock_limit = 0;
++      printk(KERN_ERR "interrupts were disabled for %lu us !\n", us);
++//    WARN_ON(1);
++}
++EXPORT_SYMBOL_GPL(iblock_end);
++
++void iblock_end_maybe(unsigned long flags)
++{
++      if (raw_irqs_disabled_flags(flags))
++              return;
++      iblock_end();
++}
++EXPORT_SYMBOL_GPL(iblock_end_maybe);
++
++static ssize_t limit_read(struct device *dev, struct device_attribute *attr,
++    char *buf)
++{
++      return sprintf(buf, "%u us\n", iblock_limit);
++}
++
++
++static ssize_t limit_write(struct device *dev, struct device_attribute *attr,
++    const char *buf, size_t count)
++{
++      unsigned long tmp;
++      char *end;
++
++      tmp = simple_strtoul(buf, &end, 0);
++      if (end == buf)
++              return -EINVAL;
++      iblock_limit = tmp;
++      return count;
++}
++
++
++static ssize_t max_read(struct device *dev, struct device_attribute *attr,
++    char *buf)
++{
++      return sprintf(buf, "%u us\n", iblock_max);
++}
++
++
++static ssize_t max_write(struct device *dev, struct device_attribute *attr,
++    const char *buf, size_t count)
++{
++      iblock_max = 0;
++      return count;
++}
++
++
++static ssize_t test_write(struct device *dev,
++    struct device_attribute *attr, const char *buf, size_t count)
++{
++      unsigned long tmp, flags;
++      char *end;
++
++      tmp = simple_strtoul(buf, &end, 0);
++      if (end == buf)
++              return -EINVAL;
++      local_irq_save(flags);
++      udelay(tmp);
++      local_irq_restore(flags);
++      return count;
++}
++
++
++static DEVICE_ATTR(limit, 0644, limit_read, limit_write);
++static DEVICE_ATTR(max, 0644, max_read, max_write);
++static DEVICE_ATTR(test, 0200, NULL, test_write);
++
++
++static struct attribute *sysfs_entries[] = {
++      &dev_attr_limit.attr,
++      &dev_attr_max.attr,
++      &dev_attr_test.attr,
++      NULL
++};
++
++
++static struct attribute_group attr_group = {
++      .name   = "iblock",
++      .attrs  = sysfs_entries,
++};
++
++
++static int __devinit iblock_init(void)
++{
++      return sysfs_create_group(kernel_kobj, &attr_group);
++}
++
++
++module_init(iblock_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/kernel/irq.c linux-2.6.29-rc3.owrt.om/arch/arm/kernel/irq.c
+--- linux-2.6.29-rc3.owrt/arch/arm/kernel/irq.c        2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/kernel/irq.c     2009-05-10 22:27:59.000000000 +0200
+@@ -104,6 +104,11 @@
+       .lock = SPIN_LOCK_UNLOCKED
+ };
++#ifdef CONFIG_FIND_IRQ_BLOCKERS
++extern int iblock_limit;
++unsigned long s3c2410_gettimeoffset(void);
++#endif
++
+ /*
+  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
+  * come via this function.  Instead, they should provide their
+@@ -112,9 +117,15 @@
+ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+ {
+       struct pt_regs *old_regs = set_irq_regs(regs);
+-
++#ifdef CONFIG_FIND_IRQ_BLOCKERS
++      unsigned long us;
++#endif
+       irq_enter();
++#ifdef CONFIG_FIND_IRQ_BLOCKERS
++      us = s3c2410_gettimeoffset();
++#endif
++
+       /*
+        * Some hardware gives randomly wrong interrupts.  Rather
+        * than crashing, do something sensible.
+@@ -124,6 +135,12 @@
+       else
+               generic_handle_irq(irq);
++#ifdef CONFIG_FIND_IRQ_BLOCKERS
++      us = s3c2410_gettimeoffset() - us;
++
++      if (iblock_limit && us > iblock_limit && us < 10000000)
++              printk(KERN_ERR "asm_do_IRQ(%u): %lu us\n", irq, us);
++#endif
+       /* AT91 specific workaround */
+       irq_finish(irq);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/kernel/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/kernel/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/kernel/Makefile     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/kernel/Makefile  2009-05-10 22:27:59.000000000 +0200
+@@ -44,5 +44,6 @@
+ head-y                        := head$(MMUEXT).o
+ obj-$(CONFIG_DEBUG_LL)        += debug.o
++obj-$(CONFIG_FIND_IRQ_BLOCKERS)                       += iblock.o
+ extra-y := $(head-y) init_task.o vmlinux.lds
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/kernel/vmlinux.lds.S linux-2.6.29-rc3.owrt.om/arch/arm/kernel/vmlinux.lds.S
+--- linux-2.6.29-rc3.owrt/arch/arm/kernel/vmlinux.lds.S        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/kernel/vmlinux.lds.S     2009-05-10 22:27:59.000000000 +0200
+@@ -106,6 +106,8 @@
+               *(.got)                 /* Global offset table          */
+       }
++      NOTES
++
+       RODATA
+       _etext = .;                     /* End of text and rodata section */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/dma.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -17,18 +17,20 @@
+ #include <linux/sysdev.h>
+ #include <linux/serial_core.h>
++#include <mach/map.h>
+ #include <mach/dma.h>
+ #include <plat/cpu.h>
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include <plat/regs-spi.h>
+ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/audio.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/audio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/audio.h   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/audio.h        1970-01-01 01:00:00.000000000 +0100
+@@ -1,45 +0,0 @@
+-/* arch/arm/mach-s3c2410/include/mach/audio.h
+- *
+- * Copyright (c) 2004-2005 Simtec Electronics
+- *    http://www.simtec.co.uk/products/SWLINUX/
+- *    Ben Dooks <ben@simtec.co.uk>
+- *
+- * S3C24XX - Audio platfrom_device info
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+-*/
+-
+-#ifndef __ASM_ARCH_AUDIO_H
+-#define __ASM_ARCH_AUDIO_H __FILE__
+-
+-/* struct s3c24xx_iis_ops
+- *
+- * called from the s3c24xx audio core to deal with the architecture
+- * or the codec's setup and control.
+- *
+- * the pointer to itself is passed through in case the caller wants to
+- * embed this in an larger structure for easy reference to it's context.
+-*/
+-
+-struct s3c24xx_iis_ops {
+-      struct module *owner;
+-
+-      int     (*startup)(struct s3c24xx_iis_ops *me);
+-      void    (*shutdown)(struct s3c24xx_iis_ops *me);
+-      int     (*suspend)(struct s3c24xx_iis_ops *me);
+-      int     (*resume)(struct s3c24xx_iis_ops *me);
+-
+-      int     (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+-      int     (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+-      int     (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+-};
+-
+-struct s3c24xx_platdata_iis {
+-      const char              *codec_clk;
+-      struct s3c24xx_iis_ops  *ops;
+-      int                     (*match_dev)(struct device *dev);
+-};
+-
+-#endif /* __ASM_ARCH_AUDIO_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/dma.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/dma.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/dma.h     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/dma.h  2009-05-10 22:27:59.000000000 +0200
+@@ -3,7 +3,7 @@
+  * Copyright (C) 2003,2004,2006 Simtec Electronics
+  *    Ben Dooks <ben@simtec.co.uk>
+  *
+- * Samsung S3C241XX DMA support
++ * Samsung S3C24XX DMA support
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+@@ -13,8 +13,8 @@
+ #ifndef __ASM_ARCH_DMA_H
+ #define __ASM_ARCH_DMA_H __FILE__
++#include <plat/dma.h>
+ #include <linux/sysdev.h>
+-#include <mach/hardware.h>
+ #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+@@ -55,9 +55,9 @@
+ /* we have 4 dma channels */
+ #ifndef CONFIG_CPU_S3C2443
+-#define S3C2410_DMA_CHANNELS          (4)
++#define S3C_DMA_CHANNELS              (4)
+ #else
+-#define S3C2410_DMA_CHANNELS          (6)
++#define S3C_DMA_CHANNELS              (6)
+ #endif
+ /* types */
+@@ -68,7 +68,6 @@
+       S3C2410_DMA_PAUSED
+ };
+-
+ /* enum s3c2410_dma_loadst
+  *
+  * This represents the state of the DMA engine, wrt to the loaded / running
+@@ -104,32 +103,6 @@
+       S3C2410_DMALOAD_1LOADED_1RUNNING,
+ };
+-enum s3c2410_dma_buffresult {
+-      S3C2410_RES_OK,
+-      S3C2410_RES_ERR,
+-      S3C2410_RES_ABORT
+-};
+-
+-enum s3c2410_dmasrc {
+-      S3C2410_DMASRC_HW,              /* source is memory */
+-      S3C2410_DMASRC_MEM              /* source is hardware */
+-};
+-
+-/* enum s3c2410_chan_op
+- *
+- * operation codes passed to the DMA code by the user, and also used
+- * to inform the current channel owner of any changes to the system state
+-*/
+-
+-enum s3c2410_chan_op {
+-      S3C2410_DMAOP_START,
+-      S3C2410_DMAOP_STOP,
+-      S3C2410_DMAOP_PAUSE,
+-      S3C2410_DMAOP_RESUME,
+-      S3C2410_DMAOP_FLUSH,
+-      S3C2410_DMAOP_TIMEOUT,          /* internal signal to handler */
+-      S3C2410_DMAOP_STARTED,          /* indicate channel started */
+-};
+ /* flags */
+@@ -137,19 +110,18 @@
+                                           * waiting for reloads */
+ #define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
++#define S3C2410_DMAF_CIRCULAR   (0x00)   /* circular enqueue not supp. */
++
+ /* dma buffer */
+-struct s3c2410_dma_client {
+-      char                *name;
+-};
++struct s3c2410_dma_buf;
+-/* s3c2410_dma_buf_s
++/* s3c2410_dma_buf
+  *
+  * internally used buffer structure to describe a queued or running
+  * buffer.
+ */
+-struct s3c2410_dma_buf;
+ struct s3c2410_dma_buf {
+       struct s3c2410_dma_buf  *next;
+       int                      magic;         /* magic */
+@@ -161,20 +133,6 @@
+ /* [1] is this updated for both recv/send modes? */
+-struct s3c2410_dma_chan;
+-
+-/* s3c2410_dma_cbfn_t
+- *
+- * buffer callback routine type
+-*/
+-
+-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+-                                 void *buf, int size,
+-                                 enum s3c2410_dma_buffresult result);
+-
+-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+-                                 enum s3c2410_chan_op );
+-
+ struct s3c2410_dma_stats {
+       unsigned long           loads;
+       unsigned long           timeout_longest;
+@@ -206,10 +164,10 @@
+       /* channel configuration */
+       enum s3c2410_dmasrc      source;
++      enum dma_ch              req_ch;
+       unsigned long            dev_addr;
+       unsigned long            load_timeout;
+       unsigned int             flags;         /* channel flags */
+-      unsigned int             hw_cfg;        /* last hw config */
+       struct s3c24xx_dma_map  *map;           /* channel hw maps */
+@@ -236,213 +194,12 @@
+       struct sys_device       dev;
+ };
+-/* the currently allocated channel information */
+-extern struct s3c2410_dma_chan s3c2410_chans[];
+-
+-/* note, we don't really use dma_device_t at the moment */
+ typedef unsigned long dma_device_t;
+-/* functions --------------------------------------------------------------- */
+-
+-/* s3c2410_dma_request
+- *
+- * request a dma channel exclusivley
+-*/
+-
+-extern int s3c2410_dma_request(unsigned int channel,
+-                             struct s3c2410_dma_client *, void *dev);
+-
+-
+-/* s3c2410_dma_ctrl
+- *
+- * change the state of the dma channel
+-*/
+-
+-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+-
+-/* s3c2410_dma_setflags
+- *
+- * set the channel's flags to a given state
+-*/
+-
+-extern int s3c2410_dma_setflags(unsigned int channel,
+-                              unsigned int flags);
+-
+-/* s3c2410_dma_free
+- *
+- * free the dma channel (will also abort any outstanding operations)
+-*/
+-
+-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+-
+-/* s3c2410_dma_enqueue
+- *
+- * place the given buffer onto the queue of operations for the channel.
+- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+- * drained before the buffer is given to the DMA system.
+-*/
+-
+-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+-                             dma_addr_t data, int size);
+-
+-/* s3c2410_dma_config
+- *
+- * configure the dma channel
+-*/
+-
+-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
+-
+-/* s3c2410_dma_devconfig
+- *
+- * configure the device we're talking to
+-*/
+-
+-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+-                               int hwcfg, unsigned long devaddr);
+-
+-/* s3c2410_dma_getposition
+- *
+- * get the position that the dma transfer is currently at
+-*/
+-
+-extern int s3c2410_dma_getposition(unsigned int channel,
+-                                 dma_addr_t *src, dma_addr_t *dest);
+-
+-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+-
+-/* DMA Register definitions */
+-
+-#define S3C2410_DMA_DISRC       (0x00)
+-#define S3C2410_DMA_DISRCC      (0x04)
+-#define S3C2410_DMA_DIDST       (0x08)
+-#define S3C2410_DMA_DIDSTC      (0x0C)
+-#define S3C2410_DMA_DCON        (0x10)
+-#define S3C2410_DMA_DSTAT       (0x14)
+-#define S3C2410_DMA_DCSRC       (0x18)
+-#define S3C2410_DMA_DCDST       (0x1C)
+-#define S3C2410_DMA_DMASKTRIG   (0x20)
+-#define S3C2412_DMA_DMAREQSEL (0x24)
+-#define S3C2443_DMA_DMAREQSEL (0x24)
+-
+-#define S3C2410_DISRCC_INC    (1<<0)
+-#define S3C2410_DISRCC_APB    (1<<1)
+-
+-#define S3C2410_DMASKTRIG_STOP   (1<<2)
+-#define S3C2410_DMASKTRIG_ON     (1<<1)
+-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+-
+-#define S3C2410_DCON_DEMAND     (0<<31)
+-#define S3C2410_DCON_HANDSHAKE  (1<<31)
+-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+-
+-#define S3C2410_DCON_INTREQ     (1<<29)
+-
+-#define S3C2410_DCON_CH0_XDREQ0       (0<<24)
+-#define S3C2410_DCON_CH0_UART0        (1<<24)
+-#define S3C2410_DCON_CH0_SDI  (2<<24)
+-#define S3C2410_DCON_CH0_TIMER        (3<<24)
+-#define S3C2410_DCON_CH0_USBEP1       (4<<24)
+-
+-#define S3C2410_DCON_CH1_XDREQ1       (0<<24)
+-#define S3C2410_DCON_CH1_UART1        (1<<24)
+-#define S3C2410_DCON_CH1_I2SSDI       (2<<24)
+-#define S3C2410_DCON_CH1_SPI  (3<<24)
+-#define S3C2410_DCON_CH1_USBEP2       (4<<24)
+-
+-#define S3C2410_DCON_CH2_I2SSDO       (0<<24)
+-#define S3C2410_DCON_CH2_I2SSDI       (1<<24)
+-#define S3C2410_DCON_CH2_SDI  (2<<24)
+-#define S3C2410_DCON_CH2_TIMER        (3<<24)
+-#define S3C2410_DCON_CH2_USBEP3       (4<<24)
+-
+-#define S3C2410_DCON_CH3_UART2        (0<<24)
+-#define S3C2410_DCON_CH3_SDI  (1<<24)
+-#define S3C2410_DCON_CH3_SPI  (2<<24)
+-#define S3C2410_DCON_CH3_TIMER        (3<<24)
+-#define S3C2410_DCON_CH3_USBEP4       (4<<24)
+-
+-#define S3C2410_DCON_SRCSHIFT   (24)
+-#define S3C2410_DCON_SRCMASK  (7<<24)
+-
+-#define S3C2410_DCON_BYTE       (0<<20)
+-#define S3C2410_DCON_HALFWORD   (1<<20)
+-#define S3C2410_DCON_WORD       (2<<20)
+-
+-#define S3C2410_DCON_AUTORELOAD (0<<22)
+-#define S3C2410_DCON_NORELOAD   (1<<22)
+-#define S3C2410_DCON_HWTRIG     (1<<23)
+-
+-#ifdef CONFIG_CPU_S3C2440
+-#define S3C2440_DIDSTC_CHKINT (1<<2)
+-
+-#define S3C2440_DCON_CH0_I2SSDO       (5<<24)
+-#define S3C2440_DCON_CH0_PCMIN        (6<<24)
+-
+-#define S3C2440_DCON_CH1_PCMOUT       (5<<24)
+-#define S3C2440_DCON_CH1_SDI  (6<<24)
+-
+-#define S3C2440_DCON_CH2_PCMIN        (5<<24)
+-#define S3C2440_DCON_CH2_MICIN        (6<<24)
+-
+-#define S3C2440_DCON_CH3_MICIN        (5<<24)
+-#define S3C2440_DCON_CH3_PCMOUT       (6<<24)
+-#endif
+-
+-#ifdef CONFIG_CPU_S3C2412
+-
+-#define S3C2412_DMAREQSEL_SRC(x)      ((x)<<1)
+-
+-#define S3C2412_DMAREQSEL_HW          (1)
+-
+-#define S3C2412_DMAREQSEL_SPI0TX      S3C2412_DMAREQSEL_SRC(0)
+-#define S3C2412_DMAREQSEL_SPI0RX      S3C2412_DMAREQSEL_SRC(1)
+-#define S3C2412_DMAREQSEL_SPI1TX      S3C2412_DMAREQSEL_SRC(2)
+-#define S3C2412_DMAREQSEL_SPI1RX      S3C2412_DMAREQSEL_SRC(3)
+-#define S3C2412_DMAREQSEL_I2STX               S3C2412_DMAREQSEL_SRC(4)
+-#define S3C2412_DMAREQSEL_I2SRX               S3C2412_DMAREQSEL_SRC(5)
+-#define S3C2412_DMAREQSEL_TIMER               S3C2412_DMAREQSEL_SRC(9)
+-#define S3C2412_DMAREQSEL_SDI         S3C2412_DMAREQSEL_SRC(10)
+-#define S3C2412_DMAREQSEL_USBEP1      S3C2412_DMAREQSEL_SRC(13)
+-#define S3C2412_DMAREQSEL_USBEP2      S3C2412_DMAREQSEL_SRC(14)
+-#define S3C2412_DMAREQSEL_USBEP3      S3C2412_DMAREQSEL_SRC(15)
+-#define S3C2412_DMAREQSEL_USBEP4      S3C2412_DMAREQSEL_SRC(16)
+-#define S3C2412_DMAREQSEL_XDREQ0      S3C2412_DMAREQSEL_SRC(17)
+-#define S3C2412_DMAREQSEL_XDREQ1      S3C2412_DMAREQSEL_SRC(18)
+-#define S3C2412_DMAREQSEL_UART0_0     S3C2412_DMAREQSEL_SRC(19)
+-#define S3C2412_DMAREQSEL_UART0_1     S3C2412_DMAREQSEL_SRC(20)
+-#define S3C2412_DMAREQSEL_UART1_0     S3C2412_DMAREQSEL_SRC(21)
+-#define S3C2412_DMAREQSEL_UART1_1     S3C2412_DMAREQSEL_SRC(22)
+-#define S3C2412_DMAREQSEL_UART2_0     S3C2412_DMAREQSEL_SRC(23)
+-#define S3C2412_DMAREQSEL_UART2_1     S3C2412_DMAREQSEL_SRC(24)
+-
+-#endif
+-
+-#define S3C2443_DMAREQSEL_SRC(x)      ((x)<<1)
+-
+-#define S3C2443_DMAREQSEL_HW          (1)
+-#define S3C2443_DMAREQSEL_SPI0TX      S3C2443_DMAREQSEL_SRC(0)
+-#define S3C2443_DMAREQSEL_SPI0RX      S3C2443_DMAREQSEL_SRC(1)
+-#define S3C2443_DMAREQSEL_SPI1TX      S3C2443_DMAREQSEL_SRC(2)
+-#define S3C2443_DMAREQSEL_SPI1RX      S3C2443_DMAREQSEL_SRC(3)
+-#define S3C2443_DMAREQSEL_I2STX               S3C2443_DMAREQSEL_SRC(4)
+-#define S3C2443_DMAREQSEL_I2SRX               S3C2443_DMAREQSEL_SRC(5)
+-#define S3C2443_DMAREQSEL_TIMER               S3C2443_DMAREQSEL_SRC(9)
+-#define S3C2443_DMAREQSEL_SDI         S3C2443_DMAREQSEL_SRC(10)
+-#define S3C2443_DMAREQSEL_XDREQ0      S3C2443_DMAREQSEL_SRC(17)
+-#define S3C2443_DMAREQSEL_XDREQ1      S3C2443_DMAREQSEL_SRC(18)
+-#define S3C2443_DMAREQSEL_UART0_0     S3C2443_DMAREQSEL_SRC(19)
+-#define S3C2443_DMAREQSEL_UART0_1     S3C2443_DMAREQSEL_SRC(20)
+-#define S3C2443_DMAREQSEL_UART1_0     S3C2443_DMAREQSEL_SRC(21)
+-#define S3C2443_DMAREQSEL_UART1_1     S3C2443_DMAREQSEL_SRC(22)
+-#define S3C2443_DMAREQSEL_UART2_0     S3C2443_DMAREQSEL_SRC(23)
+-#define S3C2443_DMAREQSEL_UART2_1     S3C2443_DMAREQSEL_SRC(24)
+-#define S3C2443_DMAREQSEL_UART3_0     S3C2443_DMAREQSEL_SRC(25)
+-#define S3C2443_DMAREQSEL_UART3_1     S3C2443_DMAREQSEL_SRC(26)
+-#define S3C2443_DMAREQSEL_PCMOUT      S3C2443_DMAREQSEL_SRC(27)
+-#define S3C2443_DMAREQSEL_PCMIN       S3C2443_DMAREQSEL_SRC(28)
+-#define S3C2443_DMAREQSEL_MICIN               S3C2443_DMAREQSEL_SRC(29)
++static int s3c_dma_has_circular(void)
++{
++      return 0;
++}
+ #endif /* __ASM_ARCH_DMA_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio-core.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio-core.h       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio-core.h    2009-05-10 22:27:59.000000000 +0200
+@@ -15,20 +15,7 @@
+ #ifndef __ASM_ARCH_GPIO_CORE_H
+ #define __ASM_ARCH_GPIO_CORE_H __FILE__
++/* currently we just include the platform support */
+ #include <plat/gpio-core.h>
+-#include <mach/regs-gpio.h>
+-
+-extern struct s3c_gpio_chip s3c24xx_gpios[];
+-
+-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+-{
+-      struct s3c_gpio_chip *chip;
+-
+-      if (pin > S3C2410_GPG10)
+-              return NULL;
+-
+-      chip = &s3c24xx_gpios[pin/32];
+-      return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+-}
+ #endif /* __ASM_ARCH_GPIO_CORE_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio.h    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio.h 2009-05-10 22:27:59.000000000 +0200
+@@ -22,4 +22,13 @@
+ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
++/* These two defines should be removed as soon as the
++ * generic irq handling makes it upstream */
++#include <mach/hardware.h>
++#define irq_to_gpio(irq)                s3c2410_gpio_irq2pin(irq)
++/* -- cut to here when generic irq makes it */
++
+ #include <asm-generic/gpio.h>
++#include <mach/gpio-nrs.h>
++
++#define S3C_GPIO_END  (S3C2410_GPIO_BANKH + 32)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,23 @@
++/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
++ *
++ * Copyright (c) 2008 Simtec Electronics
++ *    http://armlinux.simtec.co.uk/
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C2410 - GPIO bank numbering
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
++
++#define S3C2410_GPIO_BANKA   (32*0)
++#define S3C2410_GPIO_BANKB   (32*1)
++#define S3C2410_GPIO_BANKC   (32*2)
++#define S3C2410_GPIO_BANKD   (32*3)
++#define S3C2410_GPIO_BANKE   (32*4)
++#define S3C2410_GPIO_BANKF   (32*5)
++#define S3C2410_GPIO_BANKG   (32*6)
++#define S3C2410_GPIO_BANKH   (32*7)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gta01.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gta01.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gta01.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gta01.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,76 @@
++#ifndef _GTA01_H
++#define _GTA01_H
++
++#include <mach/regs-gpio.h>
++#include <mach/irqs.h>
++
++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
++#define GTA01v3_SYSTEM_REV    0x00000130
++#define GTA01v4_SYSTEM_REV    0x00000140
++#define GTA01Bv2_SYSTEM_REV   0x00000220
++#define GTA01Bv3_SYSTEM_REV   0x00000230
++#define GTA01Bv4_SYSTEM_REV   0x00000240
++
++/* Backlight */
++
++extern void gta01bl_deferred_resume(void);
++
++struct gta01bl_machinfo {
++      unsigned int default_intensity;
++      unsigned int max_intensity;
++      unsigned int limit_mask;
++      unsigned int defer_resume_backlight;
++};
++
++/* Definitions common to all revisions */
++#define GTA01_GPIO_BACKLIGHT  S3C2410_GPB0
++#define GTA01_GPIO_GPS_PWRON  S3C2410_GPB1
++#define GTA01_GPIO_MODEM_RST  S3C2410_GPB6
++#define GTA01_GPIO_MODEM_ON   S3C2410_GPB7
++#define GTA01_GPIO_LCD_RESET  S3C2410_GPC6
++#define GTA01_GPIO_PMU_IRQ    S3C2410_GPG8
++#define GTA01_GPIO_JACK_INSERT        S3C2410_GPF4
++#define GTA01_GPIO_nSD_DETECT S3C2410_GPF5
++#define GTA01_GPIO_AUX_KEY    S3C2410_GPF6
++#define GTA01_GPIO_HOLD_KEY   S3C2410_GPF7
++#define GTA01_GPIO_VIBRATOR_ON        S3C2410_GPG11
++
++#define GTA01_IRQ_MODEM               IRQ_EINT1
++#define GTA01_IRQ_JACK_INSERT IRQ_EINT4
++#define GTA01_IRQ_nSD_DETECT  IRQ_EINT5
++#define GTA01_IRQ_AUX_KEY     IRQ_EINT6
++#define GTA01_IRQ_PCF50606      IRQ_EINT16
++
++/* GTA01v3 */
++#define GTA01v3_GPIO_nGSM_EN  S3C2410_GPG9
++
++/* GTA01v4 */
++#define GTA01_GPIO_MODEM_DNLOAD       S3C2410_GPG0
++
++/* GTA01Bv2 */
++#define GTA01Bv2_GPIO_nGSM_EN S3C2410_GPF2
++#define GTA01Bv2_GPIO_VIBRATOR_ON S3C2410_GPB10
++
++/* GTA01Bv3 */
++#define GTA01_GPIO_GPS_EN_3V3 S3C2410_GPG9
++
++#define GTA01_GPIO_SDMMC_ON   S3C2410_GPB2
++#define GTA01_GPIO_BT_EN      S3C2410_GPB5
++#define GTA01_GPIO_AB_DETECT  S3C2410_GPB8
++#define GTA01_GPIO_USB_PULLUP S3C2410_GPB9
++#define GTA01_GPIO_USB_ATTACH S3C2410_GPB10
++
++#define GTA01_GPIO_GPS_EN_2V8 S3C2410_GPG9
++#define GTA01_GPIO_GPS_EN_3V  S3C2410_GPG10
++#define GTA01_GPIO_GPS_RESET  S3C2410_GPC0
++
++/* GTA01Bv4 */
++#define GTA01Bv4_GPIO_nNAND_WP        S3C2410_GPA16
++#define GTA01Bv4_GPIO_VIBRATOR_ON S3C2410_GPB3
++#define GTA01Bv4_GPIO_PMU_IRQ S3C2410_GPG1
++
++#define GTA01Bv4_IRQ_PCF50606 IRQ_EINT9
++
++extern struct pcf50606 *gta01_pcf;
++
++#endif /* _GTA01_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,10 @@
++#ifndef __MACH_GTA02_PM_WLAN_H
++#define __MACH_GTA02_PM_WLAN_H
++
++void gta02_wlan_reset(int assert_reset);
++int gta02_wlan_query_rfkill_lock(void);
++void gta02_wlan_query_rfkill_unlock(void);
++void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
++void gta02_wlan_clear_rfkill_cb(void);
++
++#endif /* __MACH_GTA02_PM_WLAN_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/hardware.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/hardware.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/hardware.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/hardware.h     2009-05-10 22:27:59.000000000 +0200
+@@ -131,7 +131,4 @@
+ /* machine specific hardware definitions should go after this */
+-/* currently here until moved into config (todo) */
+-#define CONFIG_NO_MULTIWORD_IO
+-
+ #endif /* __ASM_ARCH_HARDWARE_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/io.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/io.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/io.h      2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/io.h   2009-05-10 22:27:59.000000000 +0200
+@@ -9,7 +9,7 @@
+ #ifndef __ASM_ARM_ARCH_IO_H
+ #define __ASM_ARM_ARCH_IO_H
+-#include <mach/hardware.h>
++#include <mach/map.h>
+ #define IO_SPACE_LIMIT 0xffffffff
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/irqs.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/irqs.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/irqs.h    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/irqs.h 2009-05-10 22:27:59.000000000 +0200
+@@ -80,7 +80,7 @@
+ #define IRQ_EINT22     S3C2410_IRQ(50)
+ #define IRQ_EINT23     S3C2410_IRQ(51)
+-
++#define IRQ_EINT_BIT(x)       ((x) - IRQ_EINT4 + 4)
+ #define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+ #define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+@@ -153,9 +153,9 @@
+ #define IRQ_S3C2443_AC97      S3C2410_IRQSUB(28)
+ #ifdef CONFIG_CPU_S3C2443
+-#define NR_IRQS (IRQ_S3C2443_AC97+1)
++#define _NR_IRQS (IRQ_S3C2443_AC97+1)
+ #else
+-#define NR_IRQS (IRQ_S3C2440_AC97+1)
++#define _NR_IRQS (IRQ_S3C2440_AC97+1)
+ #endif
+ /* compatibility define. */
+@@ -167,4 +167,33 @@
+ /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+ #define FIQ_START             IRQ_EINT0
++
++/*
++ * The next 16 interrupts are for board specific purposes.  Since
++ * the kernel can only run on one machine at a time, we can re-use
++ * these.  If you need more, increase IRQ_BOARD_END, but keep it
++ * within sensible limits.
++ */
++#define IRQ_BOARD_START         _NR_IRQS
++#define IRQ_BOARD_END           (_NR_IRQS + 10)
++
++#if defined(CONFIG_MACH_NEO1973_GTA02)
++#define NR_IRQS                 (IRQ_BOARD_END)
++#else
++#define NR_IRQS                 (IRQ_BOARD_START)
++#endif
++
++/* Neo1973 GTA02 interrupts */
++#define NEO1973_GTA02_IRQ(x)    (IRQ_BOARD_START + (x))
++#define IRQ_GLAMO(x)            NEO1973_GTA02_IRQ(x)
++#define IRQ_GLAMO_HOSTBUS       IRQ_GLAMO(0)
++#define IRQ_GLAMO_JPEG          IRQ_GLAMO(1)
++#define IRQ_GLAMO_MPEG          IRQ_GLAMO(2)
++#define IRQ_GLAMO_MPROC1        IRQ_GLAMO(3)
++#define IRQ_GLAMO_MPROC0        IRQ_GLAMO(4)
++#define IRQ_GLAMO_CMDQUEUE      IRQ_GLAMO(5)
++#define IRQ_GLAMO_2D            IRQ_GLAMO(6)
++#define IRQ_GLAMO_MMC           IRQ_GLAMO(7)
++#define IRQ_GLAMO_RISC          IRQ_GLAMO(8)
++
+ #endif /* __ASM_ARCH_IRQ_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/map.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/map.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/map.h     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/map.h  2009-05-10 22:27:59.000000000 +0200
+@@ -84,7 +84,6 @@
+ #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+ #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+ #define S3C24XX_PA_DMA      S3C2410_PA_DMA
+ #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+ #define S3C24XX_PA_LCD      S3C2410_PA_LCD
+@@ -102,6 +101,7 @@
+ #define S3C_PA_IIC          S3C2410_PA_IIC
+ #define S3C_PA_UART       S3C24XX_PA_UART
++#define S3C_PA_USBHOST        S3C2410_PA_USBHOST
+ #define S3C_PA_HSMMC0     S3C2443_PA_HSMMC
+ #endif /* __ASM_ARCH_MAP_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/mci.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/mci.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/mci.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/mci.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,13 @@
++#ifndef _ARCH_MCI_H
++#define _ARCH_MCI_H
++
++struct s3c24xx_mci_pdata {
++      unsigned int    gpio_detect;
++      unsigned int    gpio_wprotect;
++      unsigned long   ocr_avail;
++      unsigned int    do_dma;
++      void            (*set_power)(unsigned char power_mode,
++                                   unsigned short vdd);
++};
++
++#endif /* _ARCH_NCI_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1 @@
++extern int gta_gsm_interrupts;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/regs-gpio.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/regs-gpio.h       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/regs-gpio.h    2009-05-10 22:27:59.000000000 +0200
+@@ -14,16 +14,7 @@
+ #ifndef __ASM_ARCH_REGS_GPIO_H
+ #define __ASM_ARCH_REGS_GPIO_H
+-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+-
+-#define S3C2410_GPIO_BANKA   (32*0)
+-#define S3C2410_GPIO_BANKB   (32*1)
+-#define S3C2410_GPIO_BANKC   (32*2)
+-#define S3C2410_GPIO_BANKD   (32*3)
+-#define S3C2410_GPIO_BANKE   (32*4)
+-#define S3C2410_GPIO_BANKF   (32*5)
+-#define S3C2410_GPIO_BANKG   (32*6)
+-#define S3C2410_GPIO_BANKH   (32*7)
++#include <mach/gpio-nrs.h>
+ #ifdef CONFIG_CPU_S3C2400
+ #define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/regs-sdi.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/regs-sdi.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/regs-sdi.h     2009-05-10 22:27:59.000000000 +0200
+@@ -30,6 +30,7 @@
+ #define S3C2410_SDIFSTA               (0x38)
+ #define S3C2410_SDIDATA               (0x3C)
++#define S3C2410_SDIDATA_BYTE          (0x3C)
+ #define S3C2410_SDIIMSK               (0x40)
+ #define S3C2440_SDIDATA               (0x40)
+@@ -37,6 +38,8 @@
+ #define S3C2440_SDICON_SDRESET        (1<<8)
+ #define S3C2440_SDICON_MMCCLOCK       (1<<5)
++#define S3C2440_SDIDATA_BYTE          (0x48)
++
+ #define S3C2410_SDICON_BYTEORDER      (1<<4)
+ #define S3C2410_SDICON_SDIOIRQ        (1<<3)
+ #define S3C2410_SDICON_RWAITEN        (1<<2)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,5 @@
++#include <linux/resume-dependency.h>
++
++extern void s3c24xx_serial_console_set_silence(int silence);
++extern void s3c24xx_serial_register_resume_dependency(struct resume_dependency *
++                                           resume_dependency, int uart_index);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/spi-gpio.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/spi-gpio.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/spi-gpio.h     2009-05-10 22:27:59.000000000 +0200
+@@ -21,7 +21,8 @@
+       int                      num_chipselect;
+       int                      bus_num;
+-      void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
++      int                      non_blocking_transfer;
++      void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs);
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/ts.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/ts.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/ts.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/ts.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,35 @@
++/* arch/arm/mach-s3c2410/include/mach/ts.h
++ *
++ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ *  Changelog:
++ *     24-Mar-2005     RTP     Created file
++ *     03-Aug-2005     RTP     Renamed to ts.h
++ */
++
++#ifndef __ASM_ARM_TS_H
++#define __ASM_ARM_TS_H
++
++#include <../drivers/input/touchscreen/ts_filter.h>
++
++struct s3c2410_ts_mach_info {
++      /* Touchscreen delay. */
++      int delay;
++      /* Prescaler value. */
++      int presc;
++      /*
++       * Null-terminated array of pointers to filter APIs and configurations
++       * we want to use. In the same order they will be applied.
++       */
++      const struct ts_filter_chain_configuration *filter_config;
++};
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
++
++#endif /* __ASM_ARM_TS_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/usb-control.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/usb-control.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/include/mach/usb-control.h     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/include/mach/usb-control.h  1970-01-01 01:00:00.000000000 +0100
+@@ -1,41 +0,0 @@
+-/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+- *
+- * Copyright (c) 2004 Simtec Electronics
+- *    Ben Dooks <ben@simtec.co.uk>
+- *
+- * S3C2410 - usb port information
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+-*/
+-
+-#ifndef __ASM_ARCH_USBCONTROL_H
+-#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+-
+-#define S3C_HCDFLG_USED       (1)
+-
+-struct s3c2410_hcd_port {
+-      unsigned char   flags;
+-      unsigned char   power;
+-      unsigned char   oc_status;
+-      unsigned char   oc_changed;
+-};
+-
+-struct s3c2410_hcd_info {
+-      struct usb_hcd          *hcd;
+-      struct s3c2410_hcd_port port[2];
+-
+-      void            (*power_control)(int port, int to);
+-      void            (*enable_oc)(struct s3c2410_hcd_info *, int on);
+-      void            (*report_oc)(struct s3c2410_hcd_info *, int ports);
+-};
+-
+-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+-{
+-      if (info->report_oc != NULL) {
+-              (info->report_oc)(info, ports);
+-      }
+-}
+-
+-#endif /*__ASM_ARCH_USBCONTROL_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/Kconfig        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -10,6 +10,7 @@
+       select CPU_ARM920T
+       select S3C2410_CLOCK
+       select S3C2410_GPIO
++      select S3C_PWM
+       select CPU_LLSERIAL_S3C2410
+       select S3C2410_PM if PM
+       help
+@@ -45,6 +46,7 @@
+         Internal node for machines with an BAST style IDE
+         interface
++
+ menu "S3C2410 Machines"
+ config ARCH_SMDK2410
+@@ -59,6 +61,7 @@
+       bool "IPAQ H1940"
+       select CPU_S3C2410
+       select PM_H1940 if PM
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the HP IPAQ H1940
+@@ -70,6 +73,7 @@
+ config MACH_N30
+       bool "Acer N30 family"
+       select CPU_S3C2410
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you want suppt for the Acer N30, Acer N35,
+         Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+@@ -82,6 +86,7 @@
+       select MACH_BAST_IDE
+       select S3C24XX_DCLK
+       select ISA
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Simtec Electronics EB2410ITX
+         development board (also known as BAST)
+@@ -89,6 +94,7 @@
+ config MACH_OTOM
+       bool "NexVision OTOM Board"
+       select CPU_S3C2410
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Nex Vision OTOM board
+@@ -96,6 +102,7 @@
+       bool "AML M5900 Series"
+       select CPU_S3C2410
+       select PM_SIMTEC if PM
++      select S3C_DEV_USB_HOST
+       help
+          Say Y here if you are using the American Microsystems M5900 Series
+            <http://www.amltd.com>
+@@ -111,6 +118,7 @@
+ config MACH_TCT_HAMMER
+       bool "TCT Hammer Board"
+       select CPU_S3C2410
++      select S3C_DEV_USB_HOST
+       help
+          Say Y here if you are using the TinCanTools Hammer Board
+            <http://www.tincantools.com>
+@@ -128,7 +136,27 @@
+ config MACH_QT2410
+       bool "QT2410"
+       select CPU_S3C2410
++      select DISPLAY_JBT6K74
+       help
+          Say Y here if you are using the Armzone QT2410
++config MACH_NEO1973_GTA01
++      bool "FIC Neo1973 GSM Phone (GTA01 Hardware)"
++      select CPU_S3C2410
++      select MACH_NEO1973
++      select S3C_DEV_USB_HOST
++      select MFD_PCF50606
++      select INPUT_PCF50606_PMU
++      select PCF50606_ADC
++      select PCF50606_GPIO
++      select RTC_DRV_PCF50606
++      select REGULATOR_PCF50606
++      select CHARGER_PCF50606
++      select PCF50606_WATCHDOG
++      select POWER_SUPPLY
++      select BATTERY_GTA01
++
++      help
++         Say Y here if you are using the FIC Neo1973 GSM Phone
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-gta01.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-gta01.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-gta01.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-gta01.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1008 @@
++/*
++ * linux/arch/arm/mach-s3c2410/mach-gta01.c
++ *
++ * S3C2410 Machine Support for the FIC Neo1973 GTA01
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/serial_core.h>
++#include <mach/ts.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++
++#include <linux/mmc/host.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/pmic.h>
++#include <linux/mfd/pcf50606/mbc.h>
++#include <linux/mfd/pcf50606/adc.h>
++
++#include <linux/gta01_battery.h>
++
++#include <linux/regulator/machine.h>
++#include <linux/regulator/consumer.h>
++
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <mach/hardware.h>
++#include <mach/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <mach/regs-gpio.h>
++#include <mach/fb.h>
++#include <mach/spi.h>
++#include <mach/spi-gpio.h>
++#include <mach/cpu.h>
++
++#include <mach/gta01.h>
++
++#include <plat/regs-serial.h>
++#include <plat/nand.h>
++#include <plat/devs.h>
++#include <plat/cpu.h>
++#include <plat/pm.h>
++#include <plat/udc.h>
++#include <plat/iic.h>
++#include <plat/mci.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++#include <plat/usb-control.h>
++#include <mach/neo1973-pm-gsm.h>
++
++#include <linux/jbt6k74.h>
++
++#include <../drivers/input/touchscreen/ts_filter_chain.h>
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++#include <../drivers/input/touchscreen/ts_filter_linear.h>
++#include <../drivers/input/touchscreen/ts_filter_mean.h>
++#include <../drivers/input/touchscreen/ts_filter_median.h>
++#include <../drivers/input/touchscreen/ts_filter_group.h>
++#endif
++
++
++static struct map_desc gta01_iodesc[] __initdata = {
++      {
++              .virtual        = 0xe0000000,
++              .pfn            = __phys_to_pfn(S3C2410_CS3+0x01000000),
++              .length         = SZ_1M,
++              .type           = MT_DEVICE
++      },
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++/* UFCON for the gta01 sets the FIFO trigger level at 4, not 8 */
++#define UFCON_GTA01_PORT0 S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta01_uartcfgs[] = {
++      [0] = {
++              .hwport      = 0,
++              .flags       = 0,
++              .ucon        = UCON,
++              .ulcon       = ULCON,
++              .ufcon       = UFCON_GTA01_PORT0,
++      },
++      [1] = {
++              .hwport      = 1,
++              .flags       = 0,
++              .ucon        = UCON,
++              .ulcon       = ULCON,
++              .ufcon       = UFCON,
++      },
++};
++
++/* TODO */
++static void gta01_pmu_event_callback(struct pcf50606 *pcf, int irq)
++{
++      /*TODO : Handle ACD here */
++}
++
++/* FIXME : Goes away when ACD is handled above */
++#if 0 
++static int pmu_callback(struct device *dev, unsigned int feature,
++                      enum pmu_event event)
++{
++      switch (feature) {
++      case PCF50606_FEAT_ACD:
++              switch (event) {
++              case PMU_EVT_INSERT:
++                      pcf50606_charge_fast(pcf50606_global, 1);
++                      break;
++              case PMU_EVT_REMOVE:
++                      pcf50606_charge_fast(pcf50606_global, 0);
++                      break;
++              default:
++                      break;
++              }
++              break;
++      default:
++              break;
++      }
++
++      return 0;
++}
++#endif
++
++struct pcf50606 *gta01_pcf;
++
++static struct platform_device gta01_pm_gsm_dev = {
++      .name           = "neo1973-pm-gsm",
++};
++
++static struct platform_device gta01_pm_bt_dev = {
++      .name           = "neo1973-pm-bt",
++};
++static struct platform_device gta01_pm_gps_dev = {
++      .name           = "neo1973-pm-gps",
++};
++
++static struct regulator_consumer_supply ioreg_consumers[] = {
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "GPS_2V8",
++      },
++};
++
++static struct regulator_consumer_supply d1reg_consumers[] = {
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "GPS_3V",
++      },
++      {
++              .dev = &gta01_pm_bt_dev.dev,
++              .supply = "BT_3V1",
++      },
++};
++
++static struct regulator_consumer_supply dcd_consumers[] = {
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "GPS_3V3",
++      },
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "GPS_1V5",
++      },
++};
++
++static struct regulator_consumer_supply d2reg_consumers[] = {
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "GPS_2V5",
++      },
++      {
++              .dev = &s3c_device_sdi.dev,
++              .supply = "SD_3V3",
++      },
++};
++
++static int gta01_bat_get_charging_status(void)
++{
++      struct pcf50606 *pcf = gta01_pcf;
++      u8 mbcc1, chgmod;
++
++      mbcc1 = pcf50606_reg_read(pcf, PCF50606_REG_MBCC1);
++      chgmod = mbcc1 & PCF50606_MBCC1_CHGMOD_MASK;
++
++      if (chgmod == PCF50606_MBCC1_CHGMOD_IDLE)
++              return 0;
++      else
++              return 1;
++}
++
++static int gta01_bat_get_voltage(void)
++{
++      struct pcf50606 *pcf = gta01_pcf;
++      u16 adc, mv = 0;
++
++      adc = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_RES);
++      mv = (adc * 6000) / 1024;
++      
++      return mv;
++}
++
++static int gta01_bat_get_current(void)
++{
++      struct pcf50606 *pcf = gta01_pcf;
++      u16 adc_battvolt, adc_adcin1;
++      s32 res;
++      
++      adc_battvolt = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_SUBTR);
++      adc_adcin1 = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_ADCIN1_SUBTR);
++      res = (adc_adcin1 - adc_battvolt) * 2400;
++
++      /*rsense is 220 milli */
++      return (res * 1000) / (220 * 1024);
++}
++
++static struct gta01_bat_platform_data gta01_bat_pdata = {
++      .get_charging_status = gta01_bat_get_charging_status,
++      .get_voltage = gta01_bat_get_voltage,
++      .get_current = gta01_bat_get_current,
++};
++
++struct platform_device gta01_bat = {
++      .name = "gta01_battery",
++      .id = -1,
++      .dev = {
++              .platform_data = &gta01_bat_pdata,
++      }
++};
++
++static void gta01_pcf_probe_done(struct pcf50606 *pcf)
++{
++      gta01_pcf = pcf;
++      gta01_bat.dev.parent = pcf->dev;
++      platform_device_register(&gta01_bat);
++}
++
++static int gps_registered_regulators = 0;
++
++static void gta01_pmu_regulator_registered(struct pcf50606 *pcf, int id)
++{
++      switch(id) {
++              case PCF50606_REGULATOR_D1REG:
++                      platform_device_register(&gta01_pm_bt_dev);
++                      gps_registered_regulators++;
++                      break;
++              case PCF50606_REGULATOR_D2REG:
++                      gps_registered_regulators++;
++                      break;
++              case PCF50606_REGULATOR_IOREG:
++              case PCF50606_REGULATOR_DCD:
++                      gps_registered_regulators++;
++                      break;
++      }
++
++      /* All GPS related regulators registered ? */
++      if (gps_registered_regulators == 4)
++              platform_device_register(&gta01_pm_gps_dev);
++                      
++}
++
++static struct pcf50606_platform_data gta01_pcf_pdata = {
++      .resumers = {
++                      [0] =   PCF50606_INT1_ALARM |
++                              PCF50606_INT1_ONKEYF |
++                              PCF50606_INT1_EXTONR,
++                      [1] =   PCF50606_INT2_CHGWD10S |
++                              PCF50606_INT2_CHGPROT |
++                              PCF50606_INT2_CHGERR,
++                      [2] =   PCF50606_INT3_LOWBAT |
++                              PCF50606_INT3_HIGHTMP |
++                              PCF50606_INT3_ACDINS,
++      },
++      .mbc_event_callback = gta01_pmu_event_callback,
++      .reg_init_data = {
++              [PCF50606_REGULATOR_D1REG] = {
++                      .constraints = {
++                              .min_uV = 3000000,
++                              .max_uV = 3150000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = ARRAY_SIZE(d1reg_consumers),
++                      .consumer_supplies = d1reg_consumers,
++              },
++              
++              [PCF50606_REGULATOR_D2REG] = {
++                      .constraints = {
++                              .min_uV = 1650000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = ARRAY_SIZE(d2reg_consumers),
++                      .consumer_supplies = d2reg_consumers,
++
++              },
++
++              [PCF50606_REGULATOR_D3REG] = {
++                      .constraints = {
++                              .min_uV = 1800000,
++                              .max_uV = 2100000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++
++              [PCF50606_REGULATOR_DCD] = {
++                      .constraints = {
++                              .min_uV = 1500000,
++                              .max_uV = 1500000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = ARRAY_SIZE(dcd_consumers),
++                      .consumer_supplies = dcd_consumers,
++              },
++
++              [PCF50606_REGULATOR_DCDE] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++
++              [PCF50606_REGULATOR_DCUD] = {
++                      .constraints = {
++                              .min_uV = 2100000,
++                              .max_uV = 2100000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              
++              [PCF50606_REGULATOR_IOREG] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = ARRAY_SIZE(ioreg_consumers),
++                      .consumer_supplies = ioreg_consumers,
++
++              },
++              
++              [PCF50606_REGULATOR_LPREG] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++      },
++      .probe_done = gta01_pcf_probe_done,
++      .regulator_registered = gta01_pmu_regulator_registered,
++};
++
++static void cfg_pmu_vrail(struct regulator_init_data *vrail,
++                        unsigned int suspend_on, unsigned int min,
++                        unsigned int max)
++{
++      vrail->constraints.state_mem.enabled = suspend_on;
++      vrail->constraints.min_uV = min;
++      vrail->constraints.max_uV = min;
++      vrail->constraints.apply_uV = 1;
++}
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++      struct regulator_init_data *reg_init_data;
++
++      reg_init_data = gta01_pcf_pdata.reg_init_data;
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01Bv4_SYSTEM_REV:
++
++              /* FIXME : gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; */
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              reg_init_data[PCF50606_REGULATOR_D3REG].constraints.state_mem.enabled = 1;
++              break;
++      case GTA01v4_SYSTEM_REV:
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_DCUD],
++                            1, 18000000, 1800000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_D1REG],
++                            0, 3000000, 3000000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_D3REG],
++                            0, 2800000, 2800000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_DCD],
++                            0, 3500000, 3500000);
++              break;
++      case GTA01v3_SYSTEM_REV:
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_D1REG],
++                            0, 3000000, 3000000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_D2REG],
++                            0, 3300000, 3300000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_D3REG],
++                            0, 3300000, 3300000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_DCD],
++                            0, 3300000, 3300000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_DCUD],
++                            1, 1800000, 1800000);
++              cfg_pmu_vrail(&reg_init_data[PCF50606_REGULATOR_IOREG],
++                            0, 2800000, 2800000);
++              break;
++      }
++}
++
++static void gta01_power_off(void)
++{
++      pcf50606_reg_write(gta01_pcf, PCF50606_REG_OOCC1,
++                      PCF50606_OOCC1_GOSTDBY);
++}
++
++/* LCD driver info */
++
++/* Configuration for 480x640 toppoly TD028TTEC1.
++ * Do not mark this as __initdata or it will break! */
++static struct s3c2410fb_display gta01_displays[] =  {
++      {
++              .type           = S3C2410_LCDCON1_TFT,
++              .width          = 43,
++              .height         = 58,
++              .xres           = 480,
++              .yres           = 640,
++              .bpp            = 16,
++
++              .pixclock       = 40000,        /* HCLK/4 */
++              .left_margin    = 104,
++              .right_margin   = 8,
++              .hsync_len      = 8,
++              .upper_margin   = 2,
++              .lower_margin   = 16,
++              .vsync_len      = 2,
++              .lcdcon5        = S3C2410_LCDCON5_FRM565 |
++                                S3C2410_LCDCON5_INVVCLK |
++                                S3C2410_LCDCON5_INVVLINE |
++                                S3C2410_LCDCON5_INVVFRAME |
++                                S3C2410_LCDCON5_PWREN |
++                                S3C2410_LCDCON5_HWSWP,
++      },
++      {
++              .type           = S3C2410_LCDCON1_TFT,
++              .width          = 43,
++              .height         = 58,
++              .xres           = 480,
++              .yres           = 640,
++              .bpp            = 32,
++
++              .pixclock       = 40000,        /* HCLK/4 */
++              .left_margin    = 104,
++              .right_margin   = 8,
++              .hsync_len      = 8,
++              .upper_margin   = 2,
++              .lower_margin   = 16,
++              .vsync_len      = 2,
++              .lcdcon5        = S3C2410_LCDCON5_FRM565 |
++                                S3C2410_LCDCON5_INVVCLK |
++                                S3C2410_LCDCON5_INVVLINE |
++                                S3C2410_LCDCON5_INVVFRAME |
++                                S3C2410_LCDCON5_PWREN |
++                                S3C2410_LCDCON5_HWSWP,
++      },
++      {
++              .type           = S3C2410_LCDCON1_TFT,
++              .width          = 43,
++              .height         = 58,
++              .xres           = 240,
++              .yres           = 320,
++              .bpp            = 16,
++
++              .pixclock       = 40000,        /* HCLK/4 */
++              .left_margin    = 104,
++              .right_margin   = 8,
++              .hsync_len      = 8,
++              .upper_margin   = 2,
++              .lower_margin   = 16,
++              .vsync_len      = 2,
++              .lcdcon5        = S3C2410_LCDCON5_FRM565 |
++                                S3C2410_LCDCON5_INVVCLK |
++                                S3C2410_LCDCON5_INVVLINE |
++                                S3C2410_LCDCON5_INVVFRAME |
++                                S3C2410_LCDCON5_PWREN |
++                                S3C2410_LCDCON5_HWSWP,
++      },
++};
++
++static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = {
++      .displays       = gta01_displays,
++      .num_displays   = ARRAY_SIZE(gta01_displays),
++      .default_display = 0,
++
++      .lpcsel         = ((0xCE6) & ~7) | 1<<4,
++};
++
++static struct platform_device *gta01_devices[] __initdata = {
++      &s3c_device_usb,
++      &s3c_device_lcd,
++      &s3c_device_wdt,
++      &s3c_device_i2c0,
++      &s3c_device_iis,
++      &s3c_device_sdi,
++      &s3c_device_usbgadget,
++      &s3c_device_nand,
++      &s3c_device_ts,
++};
++
++static struct s3c2410_nand_set gta01_nand_sets[] = {
++      [0] = {
++              .name           = "neo1973-nand",
++              .nr_chips       = 1,
++              .flags          = S3C2410_NAND_BBT,
++      },
++};
++
++static struct s3c2410_platform_nand gta01_nand_info = {
++      .tacls          = 20,
++      .twrph0         = 60,
++      .twrph1         = 20,
++      .nr_sets        = ARRAY_SIZE(gta01_nand_sets),
++      .sets           = gta01_nand_sets,
++};
++
++static struct regulator *s3c_sdi_regulator;
++
++static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd)
++{
++      int bit;
++      int mv = 1700; /* 1.7V for MMC_VDD_165_195 */
++      struct regulator *regulator;
++
++      printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u)\n",
++             power_mode, vdd);
++
++      if (!s3c_sdi_regulator) {
++              s3c_sdi_regulator =
++                      regulator_get(&s3c_device_sdi.dev, "SD_3V3");
++              if (!s3c_sdi_regulator) {
++                      printk(KERN_ERR "gta01_mmc_set_power : Cannot get regulator");
++                      return;
++              }
++      }
++
++      regulator = s3c_sdi_regulator;
++
++              return;
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              switch (power_mode) {
++              case MMC_POWER_OFF:
++                      regulator_disable(regulator);
++                      break;
++              case MMC_POWER_ON:
++                      /* translate MMC_VDD_* VDD bit to mv */
++                      for (bit = 8; bit != 24; bit++)
++                              if (vdd == (1 << bit))
++                                      mv += 100 * (bit - 4);
++                      regulator_set_voltage(regulator, mv * 1000, mv * 10000);
++                      break;
++              case MMC_POWER_UP:
++                      regulator_enable(regulator);
++                      break;
++              }
++              break;
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              switch (power_mode) {
++              case MMC_POWER_OFF:
++                      neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 1);
++                      break;
++              case MMC_POWER_ON:
++                      neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 0);
++                      break;
++              }
++              break;
++      }
++      
++      if (regulator)
++              regulator_put(regulator);
++}
++
++static struct s3c24xx_mci_pdata gta01_mmc_cfg = {
++      .gpio_detect    = GTA01_GPIO_nSD_DETECT,
++      .set_power      = &gta01_mmc_set_power, 
++      .ocr_avail      = MMC_VDD_165_195|MMC_VDD_20_21|
++                        MMC_VDD_21_22|MMC_VDD_22_23|MMC_VDD_23_24|
++                        MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
++                        MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
++                        MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33,
++};
++
++static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++      printk(KERN_DEBUG "%s(%d)\n", __func__, cmd);
++
++      switch (cmd) {
++      case S3C2410_UDC_P_ENABLE:
++              neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 1);
++              break;
++      case S3C2410_UDC_P_DISABLE:
++              neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 0);
++              break;
++      default:
++              break;
++      }
++}
++
++/* use a work queue, since I2C API inherently schedules
++ * and we get called in hardirq context from UDC driver */
++
++struct vbus_draw {
++      struct work_struct work;
++      int ma;
++};
++static struct vbus_draw gta01_udc_vbus_drawer;
++
++static void __gta01_udc_vbus_draw(struct work_struct *work)
++{
++      /*
++       * This is a fix to work around boot-time ordering problems if the
++       * s3c2410_udc is initialized before the pcf50606 driver has defined
++       * pcf50606_global
++       */
++      if (!gta01_pcf)
++              return;
++
++      if (gta01_udc_vbus_drawer.ma >= 500) {
++              /* enable fast charge */
++              printk(KERN_DEBUG "udc: enabling fast charge\n");
++              pcf50606_charge_fast(gta01_pcf, 1);
++      } else {
++              /* disable fast charge */
++              printk(KERN_DEBUG "udc: disabling fast charge\n");
++              pcf50606_charge_fast(gta01_pcf, 0);
++      }
++}
++
++static void gta01_udc_vbus_draw(unsigned int ma)
++{
++      gta01_udc_vbus_drawer.ma = ma;
++      schedule_work(&gta01_udc_vbus_drawer.work);
++}
++
++static struct s3c2410_udc_mach_info gta01_udc_cfg = {
++      .vbus_draw      = gta01_udc_vbus_draw,
++};
++
++/* Touchscreen configuration. */
++
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++const static struct ts_filter_group_configuration gta01_ts_group = {
++      .length = 12,
++      .close_enough = 10,
++      .threshold = 6,         /* At least half of the points in a group. */
++      .attempts = 10,
++};
++
++const static struct ts_filter_median_configuration gta01_ts_median = {
++      .extent = 20,
++      .decimation_below = 3,
++      .decimation_threshold = 8 * 3,
++      .decimation_above = 4,
++};
++
++const static struct ts_filter_mean_configuration gta01_ts_mean = {
++      .length = 4,
++};
++
++const static struct ts_filter_linear_configuration gta01_ts_linear = {
++      .constants = {1, 0, 0, 0, 1, 0, 1},     /* Don't modify coords. */
++      .coord0 = 0,
++      .coord1 = 1,
++};
++#endif
++
++const static struct ts_filter_chain_configuration gta01_filter_configuration[] =
++{
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++      {&ts_filter_group_api,          &gta01_ts_group.config},
++      {&ts_filter_median_api,         &gta01_ts_median.config},
++      {&ts_filter_mean_api,           &gta01_ts_mean.config},
++      {&ts_filter_linear_api,         &gta01_ts_linear.config},
++#endif
++      {NULL, NULL},
++};
++
++const static struct s3c2410_ts_mach_info gta01_ts_cfg = {
++      .delay = 10000,
++      .presc = 0xff, /* slow as we can go */
++      .filter_config = gta01_filter_configuration,
++};
++
++/* SPI */
++
++static void gta01_jbt6k74_reset(int devidx, int level)
++{
++      /* empty place holder; gta01 does not yet use this */
++      printk(KERN_DEBUG "gta01_jbt6k74_reset\n");
++}
++
++static void gta01_jbt6k74_resuming(int devidx)
++{
++      gta01bl_deferred_resume();
++}
++
++const struct jbt6k74_platform_data gta01_jbt6k74_pdata = {
++      .reset          = gta01_jbt6k74_reset,
++      .resuming       = gta01_jbt6k74_resuming,
++};
++
++static struct spi_board_info gta01_spi_board_info[] = {
++      {
++              .modalias       = "jbt6k74",
++              .platform_data  = &gta01_jbt6k74_pdata,
++              /* controller_data */
++              /* irq */
++              .max_speed_hz   = 10 * 1000 * 1000,
++              .bus_num        = 1,
++              /* chip_select */
++      },
++};
++
++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs)
++{
++      switch (cs) {
++      case BITBANG_CS_ACTIVE:
++              s3c2410_gpio_setpin(S3C2410_GPG3, 0);
++              break;
++      case BITBANG_CS_INACTIVE:
++              s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++              break;
++      }
++}
++
++static struct s3c2410_spigpio_info spi_gpio_cfg = {
++      .pin_clk        = S3C2410_GPG7,
++      .pin_mosi       = S3C2410_GPG6,
++      .pin_miso       = S3C2410_GPG5,
++      .chip_select    = &spi_gpio_cs,
++      .num_chipselect = 2,   /*** Should be 1 or 2 for gta01? ***/
++};
++
++static struct resource s3c_spi_lcm_resource[] = {
++      [0] = {
++              .start = S3C2410_GPG3,
++              .end   = S3C2410_GPG3,
++      },
++      [1] = {
++              .start = S3C2410_GPG5,
++              .end   = S3C2410_GPG5,
++      },
++      [2] = {
++              .start = S3C2410_GPG6,
++              .end   = S3C2410_GPG6,
++      },
++      [3] = {
++              .start = S3C2410_GPG7,
++              .end   = S3C2410_GPG7,
++      },
++};
++
++struct platform_device s3c_device_spi_lcm = {
++      .name             = "spi_s3c24xx_gpio",
++      .id               = 1,
++      .num_resources    = ARRAY_SIZE(s3c_spi_lcm_resource),
++      .resource         = s3c_spi_lcm_resource,
++      .dev = {
++              .platform_data = &spi_gpio_cfg,
++      },
++};
++
++static struct gta01bl_machinfo backlight_machinfo = {
++      .default_intensity      = 1,
++      .max_intensity          = 1,
++      .limit_mask             = 1,
++      .defer_resume_backlight = 1,
++};
++
++static struct resource gta01_bl_resources[] = {
++      [0] = {
++              .start  = GTA01_GPIO_BACKLIGHT,
++              .end    = GTA01_GPIO_BACKLIGHT,
++      },
++};
++
++struct platform_device gta01_bl_dev = {
++      .name           = "gta01-bl",
++      .num_resources  = ARRAY_SIZE(gta01_bl_resources),
++      .resource       = gta01_bl_resources,
++      .dev            = {
++              .platform_data = &backlight_machinfo,
++      },
++};
++
++static struct resource gta01_led_resources[] = {
++      [0] = {
++              .start  = GTA01_GPIO_VIBRATOR_ON,
++              .end    = GTA01_GPIO_VIBRATOR_ON,
++      },
++};
++
++struct platform_device gta01_led_dev = {
++      .name           = "neo1973-vibrator",
++      .num_resources  = ARRAY_SIZE(gta01_led_resources),
++      .resource       = gta01_led_resources,
++};
++
++static struct resource gta01_button_resources[] = {
++      [0] = {
++              .start = GTA01_GPIO_AUX_KEY,
++              .end   = GTA01_GPIO_AUX_KEY,
++      },
++      [1] = {
++              .start = GTA01_GPIO_HOLD_KEY,
++              .end   = GTA01_GPIO_HOLD_KEY,
++      },
++      [2] = {
++              .start = GTA01_GPIO_JACK_INSERT,
++              .end   = GTA01_GPIO_JACK_INSERT,
++      },
++};
++
++struct platform_device gta01_button_dev = {
++      .name           = "neo1973-button",
++      .num_resources  = ARRAY_SIZE(gta01_button_resources),
++      .resource       = gta01_button_resources,
++};
++
++/* USB */
++static struct s3c2410_hcd_info gta01_usb_info = {
++      .port[0]        = {
++              .flags  = S3C_HCDFLG_USED,
++      },
++      .port[1]        = {
++              .flags  = 0,
++      },
++};
++
++static void __init gta01_map_io(void)
++{
++      s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc));
++      s3c24xx_init_clocks(12*1000*1000);
++      s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs));
++}
++
++static irqreturn_t gta01_modem_irq(int irq, void *param)
++{
++      printk(KERN_DEBUG "GSM wakeup interrupt (IRQ %d)\n", irq);
++      gta_gsm_interrupts++;
++      return IRQ_HANDLED;
++}
++
++static struct i2c_board_info gta01_i2c_devs[] __initdata = {
++      {
++              I2C_BOARD_INFO("pcf50606", 0x08),
++              .irq = GTA01_IRQ_PCF50606,
++              .platform_data = &gta01_pcf_pdata,
++      },
++      {
++              I2C_BOARD_INFO("lm4857", 0x7c),
++      },
++      {
++              I2C_BOARD_INFO("wm8753", 0x1a),
++      },
++};
++
++static void __init gta01_machine_init(void)
++{
++      int rc;
++
++      if (S3C_SYSTEM_REV_ATAG == GTA01v4_SYSTEM_REV ||
++          S3C_SYSTEM_REV_ATAG == GTA01Bv2_SYSTEM_REV ||
++          S3C_SYSTEM_REV_ATAG == GTA01Bv3_SYSTEM_REV ||
++          S3C_SYSTEM_REV_ATAG == GTA01Bv4_SYSTEM_REV) {
++              gta01_udc_cfg.udc_command = gta01_udc_command;
++              gta01_mmc_cfg.ocr_avail = MMC_VDD_32_33;
++      }
++
++      s3c_device_usb.dev.platform_data = &gta01_usb_info;
++      s3c_device_nand.dev.platform_data = &gta01_nand_info;
++      s3c_device_sdi.dev.platform_data = &gta01_mmc_cfg;
++
++      s3c24xx_fb_set_platdata(&gta01_lcd_cfg);
++
++      INIT_WORK(&gta01_udc_vbus_drawer.work, __gta01_udc_vbus_draw);
++      s3c24xx_udc_set_platdata(&gta01_udc_cfg);
++      s3c_i2c0_set_platdata(NULL);
++      set_s3c2410ts_info(&gta01_ts_cfg);
++
++      /* Set LCD_RESET / XRES to high */
++      s3c2410_gpio_cfgpin(S3C2410_GPC6, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_setpin(S3C2410_GPC6, 1);
++
++      /* SPI chip select is gpio output */
++      s3c2410_gpio_cfgpin(S3C2410_GPG3, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++      platform_device_register(&s3c_device_spi_lcm);
++
++      platform_device_register(&gta01_bl_dev);
++      platform_device_register(&gta01_button_dev);
++      platform_device_register(&gta01_pm_gsm_dev);
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++              /* just use the default (GTA01_IRQ_PCF50606) */
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++              /* just use the default (GTA01_IRQ_PCF50606) */
++              gta01_led_resources[0].start =
++                      gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON;
++              break;
++      case GTA01Bv4_SYSTEM_REV:
++              gta01_i2c_devs[0].irq =  GTA01Bv4_IRQ_PCF50606;
++              gta01_led_resources[0].start =
++                      gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON;
++              break;
++      }
++      mangle_pmu_pdata_by_system_rev();
++      i2c_register_board_info(0, gta01_i2c_devs, ARRAY_SIZE(gta01_i2c_devs));
++      spi_register_board_info(gta01_spi_board_info, ARRAY_SIZE(gta01_spi_board_info));
++      
++      platform_device_register(&gta01_led_dev);
++
++      platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices));
++
++      s3c_pm_init();
++
++      set_irq_type(GTA01_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
++      rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED,
++                       "modem", NULL);
++      enable_irq_wake(GTA01_IRQ_MODEM);
++      printk(KERN_DEBUG  "Enabled GSM wakeup IRQ %d (rc=%d)\n",
++             GTA01_IRQ_MODEM, rc);
++
++      pm_power_off = &gta01_power_off;
++}
++
++MACHINE_START(NEO1973_GTA01, "GTA01")
++      .phys_io        = S3C2410_PA_UART,
++      .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++      .boot_params    = S3C2410_SDRAM_PA + 0x100,
++      .map_io         = gta01_map_io,
++      .init_irq       = s3c24xx_init_irq,
++      .init_machine   = gta01_machine_init,
++      .timer          = &s3c24xx_timer,
++MACHINE_END
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-h1940.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-h1940.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-h1940.c   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-h1940.c        2009-05-10 22:27:59.000000000 +0200
+@@ -131,6 +131,11 @@
+       .vbus_pin_inverted      = 1,
+ };
++static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
++              .delay = 10000,
++              .presc = 49,
++              .oversampling_shift = 2,
++};
+ /**
+  * Set lcd on or off
+@@ -188,6 +193,7 @@
+       &s3c_device_i2c0,
+       &s3c_device_iis,
+       &s3c_device_usbgadget,
++      &s3c_device_ts,
+       &s3c_device_leds,
+       &s3c_device_bluetooth,
+ };
+@@ -203,7 +209,7 @@
+ #ifdef CONFIG_PM_H1940
+       memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+ #endif
+-      s3c2410_pm_init();
++      s3c_pm_init();
+ }
+ static void __init h1940_init_irq(void)
+@@ -216,6 +222,7 @@
+       u32 tmp;
+       s3c24xx_fb_set_platdata(&h1940_fb_info);
++      set_s3c2410ts_info(&h1940_ts_cfg);
+       s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+       s3c_i2c0_set_platdata(NULL);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-qt2410.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-qt2410.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/mach-qt2410.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/mach-qt2410.c       2009-05-10 22:27:59.000000000 +0200
+@@ -1,6 +1,6 @@
+ /* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+  *
+- * Copyright (C) 2006 by OpenMoko, Inc.
++ * Copyright (C) 2006 by Openmoko, Inc.
+  * Author: Harald Welte <laforge@openmoko.org>
+  * All rights reserved.
+  *
+@@ -214,7 +214,7 @@
+ /* SPI */
+-static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs)
+ {
+       switch (cs) {
+       case BITBANG_CS_ACTIVE:
+@@ -321,6 +321,24 @@
+ __setup("tft=", qt2410_tft_setup);
++static struct resource qt2410_button_resources[] = {
++      [0] = {
++              .start = S3C2410_GPF0,
++              .end   = S3C2410_GPF0,
++      },
++      [1] = {
++              .start = S3C2410_GPF2,
++              .end   = S3C2410_GPF2,
++      },
++};
++
++struct platform_device qt2410_button_dev = {
++      .name           ="qt2410-button",
++      .num_resources  = ARRAY_SIZE(qt2410_button_resources),
++      .resource       = qt2410_button_resources,
++};
++
++
+ static void __init qt2410_map_io(void)
+ {
+       s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+@@ -355,7 +373,7 @@
+       s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+       platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
+-      s3c2410_pm_init();
++      s3c_pm_init();
+ }
+ MACHINE_START(QT2410, "QT2410")
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/Makefile       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
+ obj-$(CONFIG_S3C2410_PM)      += pm.o sleep.o
+ obj-$(CONFIG_S3C2410_GPIO)    += gpio.o
++#obj-$(CONFIG_S3C2410_CLOCK)  += clock.o
+ # Machine support
+@@ -37,3 +38,5 @@
+ # machine additions
+ obj-$(CONFIG_MACH_BAST_IDE)   += bast-ide.o
++obj-$(CONFIG_MACH_NEO1973_GTA01)+= mach-gta01.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/pm.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2410/pm.c   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2410/pm.c        2009-05-10 22:27:59.000000000 +0200
+@@ -37,21 +37,14 @@
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+-#ifdef CONFIG_S3C2410_PM_DEBUG
+-extern void pm_dbg(const char *fmt, ...);
+-#define DBG(fmt...) pm_dbg(fmt)
+-#else
+-#define DBG(fmt...) printk(KERN_DEBUG fmt)
+-#endif
+-
+ static void s3c2410_pm_prepare(void)
+ {
+       /* ensure at least GSTATUS3 has the resume address */
+-      __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
++      __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
+-      DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+-      DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
++      S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
++      S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+       if (machine_is_h1940()) {
+               void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/dma.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -20,17 +20,18 @@
+ #include <mach/dma.h>
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ #include <plat/cpu.h>
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
+-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-s3c2412-iis.h>
++#include <plat/regs-iis.h>
+ #include <plat/regs-spi.h>
+ #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/Kconfig        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -38,6 +38,7 @@
+ config MACH_JIVE
+       bool "Logitech Jive"
+       select CPU_S3C2412
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Logitech Jive.
+@@ -50,6 +51,7 @@
+       select CPU_S3C2412
+       select MACH_S3C2413
+       select MACH_SMDK
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using an SMDK2413
+@@ -72,6 +74,7 @@
+ config MACH_VSTMS
+       bool "VMSTMS"
+       select CPU_S3C2412
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using an VSTMS board
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/mach-jive.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/mach-jive.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/mach-jive.c    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/mach-jive.c 2009-05-10 22:27:59.000000000 +0200
+@@ -494,7 +494,7 @@
+        * correct address to resume from. */
+       __raw_writel(0x2BED, S3C2412_INFORM0);
+-      __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
++      __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+       return 0;
+ }
+@@ -630,7 +630,7 @@
+       /* initialise the power management now we've setup everything. */
+-      s3c2410_pm_init();
++      s3c_pm_init();
+       s3c_device_nand.dev.platform_data = &jive_nand_info;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/pm.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/pm.c   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/pm.c        2009-05-10 22:27:59.000000000 +0200
+@@ -85,7 +85,7 @@
+ static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+ {
+-      s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
++      s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+       return 0;
+ }
+@@ -98,7 +98,7 @@
+       tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
+       __raw_writel(tmp, S3C2412_PWRCFG);
+-      s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
++      s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+       return 0;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/s3c2412.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/s3c2412.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2412/s3c2412.c      2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2412/s3c2412.c   2009-05-10 22:27:59.000000000 +0200
+@@ -231,5 +231,8 @@
+ {
+       printk("S3C2412: Initialising architecture\n");
++      /* make sure SD/MMC driver can distinguish 2412 from 2410 */
++      s3c_device_sdi.name = "s3c2412-sdi";
++
+       return sysdev_register(&s3c2412_sysdev);
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/dma.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -17,18 +17,20 @@
+ #include <linux/sysdev.h>
+ #include <linux/serial_core.h>
++#include <mach/map.h>
+ #include <mach/dma.h>
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ #include <plat/cpu.h>
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include <plat/regs-spi.h>
+ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/Kconfig        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -23,7 +23,6 @@
+       help
+         Support for S3C2440 specific DMA code5A
+-
+ menu "S3C2440 Machines"
+ config MACH_ANUBIS
+@@ -33,6 +32,7 @@
+       select PM_SIMTEC if PM
+       select HAVE_PATA_PLATFORM
+       select S3C24XX_GPIO_EXTRA64
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Simtec Electronics ANUBIS
+         development system
+@@ -43,6 +43,7 @@
+       select S3C24XX_DCLK
+       select PM_SIMTEC if PM
+       select S3C24XX_GPIO_EXTRA128
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Simtec IM2440D20 module, also
+         known as the Osiris.
+@@ -58,12 +59,14 @@
+       bool "SMDK2440"
+       select CPU_S3C2440
+       select MACH_SMDK
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the SMDK2440.
+ config MACH_NEXCODER_2440
+       bool "NexVision NEXCODER 2440 Light Board"
+       select CPU_S3C2440
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+@@ -76,8 +79,17 @@
+ config MACH_AT2440EVB
+       bool "Avantech AT2440EVB development board"
+       select CPU_S3C2440
++      select S3C_DEV_USB_HOST
+       help
+         Say Y here if you are using the AT2440EVB development board
++config NEO1973_GTA02_2440
++      bool "Old FIC Neo1973 GTA02 hardware using S3C2440 CPU"
++      depends on MACH_NEO1973_GTA02
++      select CPU_S3C2440
++      help
++         Say Y here if you are using an early hardware revision
++         of the FIC/Openmoko Neo1973 GTA02 GSM Phone.
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/mach-rx3715.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/mach-rx3715.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/mach-rx3715.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/mach-rx3715.c       2009-05-10 22:27:59.000000000 +0200
+@@ -203,7 +203,7 @@
+ #ifdef CONFIG_PM_H1940
+       memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+ #endif
+-      s3c2410_pm_init();
++      s3c_pm_init();
+       s3c24xx_fb_set_platdata(&rx3715_fb_info);
+       platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/Makefile       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -22,3 +22,5 @@
+ obj-$(CONFIG_ARCH_S3C2440)    += mach-smdk2440.o
+ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+ obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
++obj-$(CONFIG_MACH_HXD8)               += mach-hxd8.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/s3c2440.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/s3c2440.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2440/s3c2440.c      2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2440/s3c2440.c   2009-05-10 22:27:59.000000000 +0200
+@@ -46,6 +46,9 @@
+       s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+       s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
++      /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++      s3c_device_sdi.name = "s3c2440-sdi";
++
+       /* register our system device for everything else */
+       return sysdev_register(&s3c2440_sysdev);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/include/mach/gta02.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/include/mach/gta02.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/include/mach/gta02.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/include/mach/gta02.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,85 @@
++#ifndef _GTA02_H
++#define _GTA02_H
++
++#include <mach/regs-gpio.h>
++#include <mach/irqs.h>
++
++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
++#define GTA02v1_SYSTEM_REV    0x00000310
++#define GTA02v2_SYSTEM_REV    0x00000320
++#define GTA02v3_SYSTEM_REV    0x00000330
++#define GTA02v4_SYSTEM_REV    0x00000340
++#define GTA02v5_SYSTEM_REV    0x00000350
++#define GTA02v6_SYSTEM_REV    0x00000360
++
++#define GTA02_GPIO_n3DL_GSM   S3C2410_GPA13   /* v1 + v2 + v3 only */
++
++#define GTA02_GPIO_PWR_LED1   S3C2410_GPB0
++#define GTA02_GPIO_PWR_LED2   S3C2410_GPB1
++#define GTA02_GPIO_AUX_LED    S3C2410_GPB2
++#define GTA02_GPIO_VIBRATOR_ON        S3C2410_GPB3
++#define GTA02_GPIO_MODEM_RST  S3C2410_GPB5
++#define GTA02_GPIO_BT_EN      S3C2410_GPB6
++#define GTA02_GPIO_MODEM_ON   S3C2410_GPB7
++#define GTA02_GPIO_EXTINT8    S3C2410_GPB8
++#define GTA02_GPIO_USB_PULLUP S3C2410_GPB9
++
++#define GTA02_GPIO_PIO5               S3C2410_GPC5    /* v3 + v4 only */
++#define GTA02v3_GPIO_nG1_CS   S3C2410_GPD12   /* v3 + v4 only */
++#define GTA02v3_GPIO_nG2_CS   S3C2410_GPD13   /* v3 + v4 only */
++#define GTA02v5_GPIO_HDQ      S3C2410_GPD14   /* v5 + */
++
++#define GTA02_GPIO_nG1_INT    S3C2410_GPF0
++#define GTA02_GPIO_IO1                S3C2410_GPF1
++#define GTA02_GPIO_PIO_2      S3C2410_GPF2    /* v2 + v3 + v4 only */
++#define GTA02_GPIO_JACK_INSERT        S3C2410_GPF4
++#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF5    /* v2 + v3 + v4 only */
++#define GTA02_GPIO_AUX_KEY    S3C2410_GPF6
++#define GTA02_GPIO_HOLD_KEY   S3C2410_GPF7
++
++#define GTA02_GPIO_3D_IRQ     S3C2410_GPG4
++#define GTA02v2_GPIO_nG2_INT  S3C2410_GPG8    /* v2 + v3 + v4 only */
++#define GTA02v3_GPIO_nUSB_OC  S3C2410_GPG9    /* v3 + v4 only */
++#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG10   /* v3 + v4 only */
++#define GTA02v3_GPIO_nGSM_OC  S3C2410_GPG11   /* v3 + v4 only */
++
++#define GTA02_GPIO_AMP_SHUT   S3C2440_GPJ1    /* v2 + v3 + v4 only */
++#define GTA02v1_GPIO_WLAN_GPIO10      S3C2440_GPJ2
++#define GTA02_GPIO_HP_IN      S3C2440_GPJ2    /* v2 + v3 + v4 only */
++#define GTA02_GPIO_INT0               S3C2440_GPJ3    /* v2 + v3 + v4 only */
++#define GTA02_GPIO_nGSM_EN    S3C2440_GPJ4
++#define GTA02_GPIO_3D_RESET   S3C2440_GPJ5
++#define GTA02_GPIO_nDL_GSM    S3C2440_GPJ6    /* v4 + v5 only */
++#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
++#define GTA02v1_GPIO_BAT_ID   S3C2440_GPJ8
++#define GTA02_GPIO_KEEPACT    S3C2440_GPJ8
++#define GTA02v1_GPIO_HP_IN    S3C2440_GPJ10
++#define GTA02_CHIP_PWD                S3C2440_GPJ11   /* v2 + v3 + v4 only */
++#define GTA02_GPIO_nWLAN_RESET        S3C2440_GPJ12   /* v2 + v3 + v4 only */
++
++#define GTA02_IRQ_GSENSOR_1   IRQ_EINT0
++#define GTA02_IRQ_MODEM               IRQ_EINT1
++#define GTA02_IRQ_PIO_2               IRQ_EINT2       /* v2 + v3 + v4 only */
++#define GTA02_IRQ_nJACK_INSERT        IRQ_EINT4
++#define GTA02_IRQ_WLAN_GPIO1  IRQ_EINT5
++#define GTA02_IRQ_AUX         IRQ_EINT6
++#define GTA02_IRQ_nHOLD               IRQ_EINT7
++#define GTA02_IRQ_PCF50633    IRQ_EINT9
++#define GTA02_IRQ_3D          IRQ_EINT12
++#define GTA02_IRQ_GSENSOR_2   IRQ_EINT16      /* v2 + v3 + v4 only */
++#define GTA02v3_IRQ_nUSB_OC   IRQ_EINT17      /* v3 + v4 only */
++#define GTA02v3_IRQ_nUSB_FLT  IRQ_EINT18      /* v3 + v4 only */
++#define GTA02v3_IRQ_nGSM_OC   IRQ_EINT19      /* v3 + v4 only */
++
++/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
++#define GTA02_PCB_ID1_0               S3C2410_GPC13
++#define GTA02_PCB_ID1_1               S3C2410_GPC15
++#define GTA02_PCB_ID1_2               S3C2410_GPD0
++#define GTA02_PCB_ID2_0               S3C2410_GPD3
++#define GTA02_PCB_ID2_1               S3C2410_GPD4
++
++int gta02_get_pcb_revision(void);
++
++extern struct pcf50633 *gta02_pcf;
++
++#endif /* _GTA02_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/Kconfig        2009-05-10 22:05:02.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -11,6 +11,7 @@
+       select S3C2410_CLOCK
+       select S3C2410_GPIO
+       select S3C2410_PM if PM
++      select S3C2440_DMA if S3C2410_DMA
+       select CPU_S3C244X
+       select CPU_LLSERIAL_S3C2440
+       help
+@@ -24,6 +25,20 @@
+       depends on ARCH_S3C2440
+       select CPU_S3C2442
++config MACH_NEO1973_GTA02
++      bool "FIC Neo1973 GSM Phone (GTA02 Hardware)"
++      select CPU_S3C2442
++      select MFD_PCF50633
++      select PCF50633_GPIO
++      select I2C
++      select POWER_SUPPLY
++      select MACH_NEO1973
++      select S3C_PWM
++      select FIQ
++      select S3C_DEV_USB_HOST
++      help
++         Say Y here if you are using the FIC Neo1973 GSM Phone
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/mach-gta02.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/mach-gta02.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/mach-gta02.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/mach-gta02.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1706 @@
++/*
++ * linux/arch/arm/mach-s3c2440/mach-gta02.c
++ *
++ * S3C2440 Machine Support for the FIC GTA02 (Neo1973)
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/serial_core.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/glamo.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <linux/i2c.h>
++#include <linux/backlight.h>
++#include <linux/regulator/machine.h>
++
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/mfd/pcf50633/mbc.h>
++#include <linux/mfd/pcf50633/adc.h>
++#include <linux/mfd/pcf50633/gpio.h>
++#include <linux/mfd/pcf50633/pmic.h>
++
++#include <linux/lis302dl.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <mach/hardware.h>
++#include <mach/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <mach/regs-irq.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++#include <mach/fb.h>
++#include <mach/mci.h>
++#include <mach/ts.h>
++#include <mach/spi.h>
++#include <mach/spi-gpio.h>
++#include <mach/regs-mem.h>
++#include <mach/spi-gpio.h>
++#include <plat/pwm.h>
++#include <mach/cpu.h>
++
++#include <mach/gta02.h>
++
++#include <plat/regs-serial.h>
++#include <plat/nand.h>
++#include <plat/devs.h>
++#include <plat/cpu.h>
++#include <plat/pm.h>
++#include <plat/udc.h>
++#include <plat/iic.h>
++#include <plat/usb-control.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++#include <mach/neo1973-pm-gsm.h>
++#include <mach/gta02-pm-wlan.h>
++#include <plat/regs-timer.h>
++
++#include <linux/jbt6k74.h>
++
++#include <linux/glamofb.h>
++
++#include <linux/hdq.h>
++#include <linux/bq27000_battery.h>
++
++#include "../plat-s3c24xx/neo1973_pm_gps.h"
++
++#include <../drivers/input/touchscreen/ts_filter_chain.h>
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++#include <../drivers/input/touchscreen/ts_filter_linear.h>
++#include <../drivers/input/touchscreen/ts_filter_mean.h>
++#include <../drivers/input/touchscreen/ts_filter_median.h>
++#include <../drivers/input/touchscreen/ts_filter_group.h>
++#endif
++
++#include <asm/fiq.h>
++
++#include <linux/neo1973_vibrator.h>
++
++/* arbitrates which sensor IRQ owns the shared SPI bus */
++static spinlock_t motion_irq_lock;
++
++
++/* -------------------------------------------------------------------------------
++ * GTA02 FIQ related
++ *
++ * Calls into vibrator and hdq and based on the return values
++ * determines if we the FIQ source be kept alive
++ */
++
++#define DIVISOR_FROM_US(x) ((x) << 3)
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
++extern int hdq_fiq_handler(void);
++#endif
++
++#ifdef CONFIG_LEDS_NEO1973_VIBRATOR
++#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
++extern int neo1973_vibrator_fiq_handler(void);
++#endif
++
++/* Global data related to our fiq source */
++static u32 gta02_fiq_ack_mask;
++static struct s3c2410_pwm gta02_fiq_pwm_timer;
++static u16 gta02_fiq_timer_index;
++static int gta02_fiq_irq;
++
++static void gta02_fiq_handler(void)
++{
++      u16 divisor = 0xffff;
++
++      /* Vibrator servicing */
++
++      /* disable further timer interrupts if nobody has any work
++       * or adjust rate according to who still has work
++       *
++       * CAUTION: it means forground code must disable FIQ around
++       * its own non-atomic S3C2410_INTMSK changes... not common
++       * thankfully and taken care of by the fiq-basis patch
++       */
++
++#ifdef CONFIG_LEDS_NEO1973_VIBRATOR
++      if (neo1973_vibrator_fiq_handler())
++              divisor = FIQ_DIVISOR_VIBRATOR;
++#endif
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++      if (hdq_fiq_handler())
++              divisor = FIQ_DIVISOR_HDQ;
++#endif
++
++      if (divisor == 0xffff) /* mask the fiq irq source */
++              __raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
++                           S3C2410_INTMSK);
++      else /* still working, maybe at a different rate */
++              __raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
++
++      __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
++}
++
++static void gta02_fiq_kick(void)
++{
++      unsigned long flags;
++      u32 tcon;
++      
++      /* we have to take care about FIQ because this modification is
++       * non-atomic, FIQ could come in after the read and before the
++       * writeback and its changes to the register would be lost
++       * (platform INTMSK mod code is taken care of already)
++       */
++      local_save_flags(flags);
++      local_fiq_disable();
++      /* allow FIQs to resume */
++      __raw_writel(__raw_readl(S3C2410_INTMSK) &
++                   ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
++                   S3C2410_INTMSK);
++      tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
++      /* fake the timer to a count of 1 */
++      __raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
++      __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
++      __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
++                   S3C2410_TCON);
++      __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
++      local_irq_restore(flags);
++}
++
++static int gta02_fiq_enable(void)
++{
++      int irq_index_fiq = IRQ_TIMER3;
++      int rc = 0;
++
++      local_fiq_disable();
++
++      gta02_fiq_irq = irq_index_fiq;
++      gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
++      gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
++
++      /* set up the timer to operate as a pwm device */
++
++      rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
++      if (rc)
++              goto bail;
++
++      gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
++      gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
++      gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
++      /* default rate == ~32us */
++      gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
++
++      rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
++      if (rc)
++              goto bail;
++
++      s3c2410_pwm_start(&gta02_fiq_pwm_timer);
++
++      /* let our selected interrupt be a magic FIQ interrupt */
++      __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
++
++      /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
++      local_fiq_enable();
++
++      set_fiq_c_handler(gta02_fiq_handler);
++
++      return 0;
++
++bail:
++      printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
++
++      return rc;
++}
++
++static void gta02_fiq_disable(void)
++{
++      __raw_writel(0, S3C2410_INTMOD);
++      local_fiq_disable();
++      gta02_fiq_irq = 0; /* no active source interrupt now either */
++
++}
++/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
++
++/*
++ * this gets called every 1ms when we paniced.
++ */
++
++static long gta02_panic_blink(long count)
++{
++      long delay = 0;
++      static long last_blink;
++      static char led;
++
++      if (count - last_blink < 100) /* 200ms period, fast blink */
++              return 0;
++
++      led ^= 1;
++      s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
++      neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led);
++
++      last_blink = count;
++      return delay;
++}
++
++
++/**
++ * returns PCB revision information in b9,b8 and b2,b1,b0
++ * Pre-GTA02 A6 returns 0x000
++ *     GTA02 A6 returns 0x101
++ *     ...
++ */
++
++int gta02_get_pcb_revision(void)
++{
++      int n;
++      int u = 0;
++      static unsigned long pinlist[] = {
++              GTA02_PCB_ID1_0,
++              GTA02_PCB_ID1_1,
++              GTA02_PCB_ID1_2,
++              GTA02_PCB_ID2_0,
++              GTA02_PCB_ID2_1,
++      };
++      static int pin_offset[] = {
++              0, 1, 2, 8, 9
++      };
++
++      for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
++              /*
++               * set the PCB version GPIO to be pulled-down input
++               * force low briefly first
++               */
++              s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
++              s3c2410_gpio_setpin(pinlist[n], 0);
++              /* misnomer: it is a pullDOWN in 2442 */
++              s3c2410_gpio_pullup(pinlist[n], 1);
++              s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
++
++              udelay(10);
++
++              if (s3c2410_gpio_getpin(pinlist[n]))
++                      u |= 1 << pin_offset[n];
++
++              /*
++              * when not being interrogated, all of the revision GPIO
++              * are set to output HIGH without pulldown so no current flows
++              * if they are NC or pulled up.
++              */
++              s3c2410_gpio_setpin(pinlist[n], 1);
++              s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
++              /* misnomer: it is a pullDOWN in 2442 */
++              s3c2410_gpio_pullup(pinlist[n], 0);
++      }
++
++      return u;
++}
++
++struct platform_device gta02_version_device = {
++      .name           = "neo1973-version",
++      .num_resources  = 0,
++};
++
++struct platform_device gta02_resume_reason_device = {
++      .name           = "neo1973-resume",
++      .num_resources  = 0,
++};
++
++struct platform_device gta02_memconfig_device = {
++      .name           = "neo1973-memconfig",
++      .num_resources  = 0,
++};
++
++static struct map_desc gta02_iodesc[] __initdata = {
++      {
++              .virtual        = 0xe0000000,
++              .pfn            = __phys_to_pfn(S3C2410_CS3+0x01000000),
++              .length         = SZ_1M,
++              .type           = MT_DEVICE
++      },
++};
++
++#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta02_uartcfgs[] = {
++      [0] = {
++              .hwport      = 0,
++              .flags       = 0,
++              .ucon        = UCON,
++              .ulcon       = ULCON,
++              .ufcon       = UFCON,
++      },
++      [1] = {
++              .hwport      = 1,
++              .flags       = 0,
++              .ucon        = UCON,
++              .ulcon       = ULCON,
++              .ufcon       = UFCON,
++      },
++      [2] = {
++              .hwport      = 2,
++              .flags       = 0,
++              .ucon        = UCON,
++              .ulcon       = ULCON,
++              .ufcon       = UFCON,
++      },
++
++};
++
++struct pcf50633 *gta02_pcf;
++
++#ifdef CONFIG_CHARGER_PCF50633
++static int gta02_get_charger_online_status(void)
++{
++      struct pcf50633 *pcf = gta02_pcf;
++
++      return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
++}
++
++static int gta02_get_charger_active_status(void)
++{
++      struct pcf50633 *pcf = gta02_pcf;
++
++      return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
++}
++
++#define ADC_NOM_CHG_DETECT_1A 6
++#define ADC_NOM_CHG_DETECT_USB 43
++
++static void
++gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
++{
++      int  ma;
++             
++      /* Interpret charger type */
++      if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
++
++              /* Stop GPO driving out now that we have a IA charger */
++              pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
++      
++              ma = 1000;      
++      } else
++              ma = 100;
++
++      pcf50633_mbc_usb_curlim_set(pcf, ma);
++}
++
++static struct delayed_work gta02_charger_work;
++static int gta02_usb_vbus_draw;
++
++static void gta02_charger_worker(struct work_struct *work)
++{
++      struct pcf50633 *pcf = gta02_pcf;
++
++      if (gta02_usb_vbus_draw) {
++              pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
++              return;
++      } else {
++#ifdef CONFIG_PCF50633_ADC
++              pcf50633_adc_async_read(pcf,
++                      PCF50633_ADCC1_MUX_ADCIN1,
++                      PCF50633_ADCC1_AVERAGE_16,
++                      gta02_configure_pmu_for_charger, NULL);
++#else
++              /* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
++              pcf50633_mbc_usb_curlim_set(pcf, 100);
++#endif
++              return;
++      }
++}
++
++#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
++static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
++{
++      if (irq == PCF50633_IRQ_USBINS) {
++              schedule_delayed_work(&gta02_charger_work,
++                              GTA02_CHARGER_CONFIGURE_TIMEOUT);
++              return;
++      } else if (irq == PCF50633_IRQ_USBREM) {
++              cancel_delayed_work_sync(&gta02_charger_work);
++              gta02_usb_vbus_draw = 0;
++      }
++}
++
++static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
++{
++      pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
++                      PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
++}
++
++
++static void gta02_udc_vbus_draw(unsigned int ma)
++{
++        if (!gta02_pcf)
++              return;
++
++      gta02_usb_vbus_draw = ma;
++
++      schedule_delayed_work(&gta02_charger_work,
++                              GTA02_CHARGER_CONFIGURE_TIMEOUT);
++}
++#else /* !CONFIG_CHARGER_PCF50633 */
++#define gta02_get_charger_online_status NULL
++#define gta02_get_charger_active_status NULL
++#define gta02_pmu_event_callback        NULL
++#define gta02_udc_vbus_draw             NULL
++#endif
++
++static struct platform_device gta01_pm_gps_dev = {
++      .name           = "neo1973-pm-gps",
++};
++
++static struct platform_device gta01_pm_bt_dev = {
++      .name           = "neo1973-pm-bt",
++};
++
++static struct platform_device gta02_pm_gsm_dev = {
++      .name           = "neo1973-pm-gsm",
++};
++
++/* this is called when pc50633 is probed, unfortunately quite late in the
++ * day since it is an I2C bus device.  Here we can belatedly define some
++ * platform devices with the advantage that we can mark the pcf50633 as the
++ * parent.  This makes them get suspended and resumed with their parent
++ * the pcf50633 still around.
++ */
++
++static struct platform_device gta02_glamo_dev;
++static void mangle_glamo_res_by_system_rev(void);
++
++static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
++static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
++
++static struct platform_device gta02_pm_wlan_dev = {
++      .name           = "gta02-pm-wlan",
++};
++
++static struct regulator_consumer_supply ldo4_consumers[] = {
++      {
++              .dev = &gta01_pm_bt_dev.dev,
++              .supply = "BT_3V2",
++      },
++};
++
++static struct regulator_consumer_supply ldo5_consumers[] = {
++      {
++              .dev = &gta01_pm_gps_dev.dev,
++              .supply = "RF_3V",
++      },
++};
++
++/*
++ * We need this dummy thing to fill the regulator consumers
++ */
++static struct platform_device gta02_mmc_dev = {
++      /* details filled in by glamo core */
++};
++
++static struct regulator_consumer_supply hcldo_consumers[] = {
++      {
++              .dev = &gta02_mmc_dev.dev,
++              .supply = "SD_3V3",
++      },
++};
++
++static char *gta02_batteries[] = {
++      "battery",
++};
++
++struct pcf50633_platform_data gta02_pcf_pdata = {
++      .resumers = {
++              [0] =   PCF50633_INT1_USBINS |
++                      PCF50633_INT1_USBREM |
++                      PCF50633_INT1_ALARM,
++              [1] =   PCF50633_INT2_ONKEYF,
++              [2] =   PCF50633_INT3_ONKEY1S,
++              [3] =   PCF50633_INT4_LOWSYS |
++                      PCF50633_INT4_LOWBAT |
++                      PCF50633_INT4_HIGHTMP,
++      },
++
++      .batteries = gta02_batteries,
++      .num_batteries = ARRAY_SIZE(gta02_batteries),
++      .charging_restart_interval = (900 * HZ),
++      .chg_ref_current_ma = 1000,
++
++      .reg_init_data = {
++              [PCF50633_REGULATOR_AUTO] = {
++                      .constraints = {
++                              .name = "IO_3V3",
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .boot_on = 1,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_DOWN1] = {
++                      .constraints = {
++                              .name = "CORE_1V3",
++                              .min_uV = 1300000,
++                              .max_uV = 1600000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .boot_on = 1,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_DOWN2] = {
++                      .constraints = {
++                              .name = "IO_1V8",
++                              .min_uV = 1800000,
++                              .max_uV = 1800000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .boot_on = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_HCLDO] = {
++                      .constraints = {
++                              .name = "SD_3V3",
++                              .min_uV = 2000000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
++                              .boot_on = 1,
++                      },
++                      .num_consumer_supplies = 1,
++                      .consumer_supplies = hcldo_consumers,
++              },
++              [PCF50633_REGULATOR_LDO1] = {
++                      .constraints = {
++                              .name = "GSENSOR_3V3",
++                              .min_uV = 1300000,
++                              .max_uV = 1300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_LDO2] = {
++                      .constraints = {
++                              .name = "CODEC_3V3",
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_LDO3] = {
++                      .constraints = {
++                              .min_uV = 3000000,
++                              .max_uV = 3000000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_LDO4] = {
++                      .constraints = {
++                              .name = "BT_3V2",
++                              .min_uV = 3200000,
++                              .max_uV = 3200000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 1,
++                      .consumer_supplies = ldo4_consumers,
++              },
++              [PCF50633_REGULATOR_LDO5] = {
++                      .constraints = {
++                              .name = "RF_3V",
++                              .min_uV = 1500000,
++                              .max_uV = 1500000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 1,
++                      .consumer_supplies = ldo5_consumers,
++              },
++              [PCF50633_REGULATOR_LDO6] = {
++                      .constraints = {
++                              .name = "LCM_3V",
++                              .min_uV = 0,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              [PCF50633_REGULATOR_MEMLDO] = {
++                      .constraints = {
++                              .min_uV = 1800000,
++                              .max_uV = 1800000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++
++      },
++      .probe_done = gta02_pmu_attach_child_devices,
++      .regulator_registered = gta02_pmu_regulator_registered,
++      .mbc_event_callback = gta02_pmu_event_callback,
++      .force_shutdown = gta02_pmu_force_shutdown,
++};
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++      struct regulator_init_data *reg_init_data;
++
++      reg_init_data = gta02_pcf_pdata.reg_init_data;
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA02v1_SYSTEM_REV:
++              /* FIXME: this is only in v1 due to wrong PMU variant */
++              reg_init_data[PCF50633_REGULATOR_DOWN2]
++                                      .constraints.state_mem.enabled = 1;
++              break;
++      case GTA02v2_SYSTEM_REV:
++      case GTA02v3_SYSTEM_REV:
++      case GTA02v4_SYSTEM_REV:
++      case GTA02v5_SYSTEM_REV:
++      case GTA02v6_SYSTEM_REV:
++              reg_init_data[PCF50633_REGULATOR_LDO1]
++                                      .constraints.min_uV = 3300000;
++              reg_init_data[PCF50633_REGULATOR_LDO1]
++                                      .constraints.min_uV = 3300000;
++              reg_init_data[PCF50633_REGULATOR_LDO1]
++                                      .constraints.state_mem.enabled = 0;
++
++              reg_init_data[PCF50633_REGULATOR_LDO5]
++                                      .constraints.min_uV = 3000000;
++              reg_init_data[PCF50633_REGULATOR_LDO5]
++                                      .constraints.max_uV = 3000000;
++              
++              reg_init_data[PCF50633_REGULATOR_LDO6]
++                                      .constraints.min_uV = 3000000;
++              reg_init_data[PCF50633_REGULATOR_LDO6]
++                                      .constraints.max_uV = 3000000;
++              reg_init_data[PCF50633_REGULATOR_LDO6]
++                                      .constraints.apply_uV = 1;
++              break;
++      default:
++              break;
++      }
++}
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++/* BQ27000 Battery */
++
++struct bq27000_platform_data bq27000_pdata = {
++      .name = "battery",
++      .rsense_mohms = 20,
++      .hdq_read = hdq_read,
++      .hdq_write = hdq_write,
++      .hdq_initialized = hdq_initialized,
++      .get_charger_online_status = gta02_get_charger_online_status,
++      .get_charger_active_status = gta02_get_charger_active_status
++};
++
++struct platform_device bq27000_battery_device = {
++      .name           = "bq27000-battery",
++      .dev = {
++              .platform_data = &bq27000_pdata,
++      },
++};
++
++/* HDQ */
++
++static void gta02_hdq_attach_child_devices(struct device *parent_device)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA02v5_SYSTEM_REV:
++      case GTA02v6_SYSTEM_REV:
++              bq27000_battery_device.dev.parent = parent_device;
++              platform_device_register(&bq27000_battery_device);
++              break;
++      default:
++              break;
++      }
++}
++
++static void gta02_hdq_gpio_direction_out(void)
++{
++      s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
++}
++
++static void gta02_hdq_gpio_direction_in(void)
++{
++      s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
++}
++
++static void gta02_hdq_gpio_set_value(int val)
++{
++
++      s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
++}
++
++static int gta02_hdq_gpio_get_value(void)
++{
++      return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
++}
++
++static struct resource gta02_hdq_resources[] = {
++      [0] = {
++              .start  = GTA02v5_GPIO_HDQ,
++              .end    = GTA02v5_GPIO_HDQ,
++      },
++};
++
++struct hdq_platform_data gta02_hdq_platform_data = {
++      .attach_child_devices = gta02_hdq_attach_child_devices,
++      .gpio_dir_out = gta02_hdq_gpio_direction_out,
++      .gpio_dir_in = gta02_hdq_gpio_direction_in,
++      .gpio_set = gta02_hdq_gpio_set_value,
++      .gpio_get = gta02_hdq_gpio_get_value,
++
++      .enable_fiq = gta02_fiq_enable,
++      .disable_fiq = gta02_fiq_disable,
++      .kick_fiq = gta02_fiq_kick,
++
++};
++
++struct platform_device gta02_hdq_device = {
++      .name           = "hdq",
++      .num_resources  = 1,
++      .resource       = gta02_hdq_resources,
++      .dev            = {
++              .platform_data = &gta02_hdq_platform_data,
++      },
++};
++#endif
++
++
++#ifdef CONFIG_LEDS_NEO1973_VIBRATOR
++/* vibrator (child of FIQ) */
++
++static struct resource gta02_vibrator_resources[] = {
++      [0] = {
++              .start  = GTA02_GPIO_VIBRATOR_ON,
++              .end    = GTA02_GPIO_VIBRATOR_ON,
++      },
++};
++struct neo1973_vib_platform_data gta02_vib_pdata = {
++      .enable_fiq = gta02_fiq_enable,
++      .disable_fiq = gta02_fiq_disable,
++      .kick_fiq = gta02_fiq_kick,
++};
++
++static struct platform_device gta02_vibrator_dev = {
++      .name           = "neo1973-vibrator",
++      .num_resources  = ARRAY_SIZE(gta02_vibrator_resources),
++      .resource       = gta02_vibrator_resources,
++      .dev     = {
++              .platform_data = &gta02_vib_pdata,
++              },
++};
++#endif
++
++/* NOR Flash */
++
++#define GTA02_FLASH_BASE      0x18000000 /* GCS3 */
++#define GTA02_FLASH_SIZE      0x200000 /* 2MBytes */
++
++static struct physmap_flash_data gta02_nor_flash_data = {
++      .width          = 2,
++};
++
++static struct resource gta02_nor_flash_resource = {
++      .start          = GTA02_FLASH_BASE,
++      .end            = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
++      .flags          = IORESOURCE_MEM,
++};
++
++static struct platform_device gta02_nor_flash = {
++      .name           = "physmap-flash",
++      .id             = 0,
++      .dev            = {
++                              .platform_data  = &gta02_nor_flash_data,
++                      },
++      .resource       = &gta02_nor_flash_resource,
++      .num_resources  = 1,
++};
++
++
++struct platform_device s3c24xx_pwm_device = {
++      .name           = "s3c24xx_pwm",
++      .num_resources  = 0,
++};
++
++static struct i2c_board_info gta02_i2c_devs[] __initdata = {
++      {
++              I2C_BOARD_INFO("pcf50633", 0x73),
++              .irq = GTA02_IRQ_PCF50633,
++              .platform_data = &gta02_pcf_pdata,
++      },
++      {
++              I2C_BOARD_INFO("wm8753", 0x1a),
++      },
++};
++
++static struct s3c2410_nand_set gta02_nand_sets[] = {
++      [0] = {
++              .name           = "neo1973-nand",
++              .nr_chips       = 1,
++              .flags          = S3C2410_NAND_BBT,
++      },
++};
++
++/* choose a set of timings derived from S3C@2442B MCP54 
++ * data sheet (K5D2G13ACM-D075 MCP Memory)
++ */
++
++static struct s3c2410_platform_nand gta02_nand_info = {
++      .tacls          = 0,
++      .twrph0         = 25,
++      .twrph1         = 15,
++      .nr_sets        = ARRAY_SIZE(gta02_nand_sets),
++      .sets           = gta02_nand_sets,
++      .software_ecc   = 1,
++};
++
++
++static void gta02_s3c_mmc_set_power(unsigned char power_mode,
++    unsigned short vdd)
++{
++      static int is_on = -1;
++      int on;
++
++      on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
++      if (is_on != on)
++              gta02_wlan_reset(!on);
++      is_on = on;
++}
++
++
++static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
++      .set_power      = gta02_s3c_mmc_set_power,
++};
++
++static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++      switch (cmd) {
++      case S3C2410_UDC_P_ENABLE:
++              printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
++              neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
++              break;
++      case S3C2410_UDC_P_DISABLE:
++              printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
++              neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
++              break;
++      case S3C2410_UDC_P_RESET:
++              printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
++              /* FIXME! */
++              break;
++      default:
++              break;
++      }
++}
++
++/* get PMU to set USB current limit accordingly */
++
++static struct s3c2410_udc_mach_info gta02_udc_cfg = {
++      .vbus_draw      = gta02_udc_vbus_draw,
++      .udc_command    = gta02_udc_command,
++
++};
++
++
++/* Touchscreen configuration. */
++
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++const static struct ts_filter_group_configuration gta02_ts_group = {
++      .length = 12,
++      .close_enough = 10,
++      .threshold = 6,         /* At least half of the points in a group. */
++      .attempts = 10,
++};
++
++const static struct ts_filter_median_configuration gta02_ts_median = {
++      .extent = 20,
++      .decimation_below = 3,
++      .decimation_threshold = 8 * 3,
++      .decimation_above = 4,
++};
++
++const static struct ts_filter_mean_configuration gta02_ts_mean = {
++      .length = 4,
++};
++
++const static struct ts_filter_linear_configuration gta02_ts_linear = {
++      .constants = {1, 0, 0, 0, 1, 0, 1},     /* Don't modify coords. */
++      .coord0 = 0,
++      .coord1 = 1,
++};
++#endif
++
++const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
++{
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++      {&ts_filter_group_api,          &gta02_ts_group.config},
++      {&ts_filter_median_api,         &gta02_ts_median.config},
++      {&ts_filter_mean_api,           &gta02_ts_mean.config},
++      {&ts_filter_linear_api,         &gta02_ts_linear.config},
++#endif
++      {NULL, NULL},
++};
++
++const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
++      .delay = 10000,
++      .presc = 0xff, /* slow as we can go */
++      .filter_config = gta02_filter_configuration,
++};
++
++
++
++static void gta02_bl_set_intensity(int intensity)
++{
++      struct pcf50633 *pcf = gta02_pcf;
++      int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
++      int ret;
++
++      intensity >>= 2;
++
++      /*
++       * One code path that leads here is from a kernel panic. Trying to turn
++       * the backlight on just gives us a nearly endless stream of complaints
++       * and accomplishes nothing. We can't win. Just give up.
++       *
++       * In the unlikely event that there's another path leading here while
++       * we're atomic, we print at least a warning.
++       */
++      if (in_atomic()) {
++              printk(KERN_ERR
++                  "gta02_bl_set_intensity called while atomic\n");
++              return;
++      }
++
++      if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
++              old_intensity = 0;
++      else
++              old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
++
++      if (intensity == old_intensity)
++              return;
++
++      /* We can't do this anywhere else */
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
++
++      /*
++       * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
++       * if seen, you have to re-enable the LED unit
++       */
++      if (!intensity || !old_intensity)
++              pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
++
++      if (!intensity) /* illegal to set LEDOUT to 0 */
++              ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
++                                                                           2);
++      else
++              ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
++                             intensity);
++
++      if (intensity)
++              pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
++
++}
++
++static struct generic_bl_info gta02_bl_info = {
++      .name                   = "gta02-bl",
++      .max_intensity          = 0xff,
++      .default_intensity      = 0xff,
++      .set_bl_intensity       = gta02_bl_set_intensity,
++};
++
++static struct platform_device gta02_bl_dev = {
++      .name             = "generic-bl",
++      .id               = 1,
++      .dev = {
++              .platform_data = &gta02_bl_info,
++      },
++};
++
++/* SPI: LCM control interface attached to Glamo3362 */
++
++static void gta02_jbt6k74_reset(int devidx, int level)
++{
++      glamo_lcm_reset(level);
++}     
++
++static void gta02_jbt6k74_probe_completed(struct device *dev)
++{
++      struct pcf50633 *pcf = gta02_pcf;
++
++      /* Switch on backlight. Qi does not do it for us */
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
++
++      gta02_bl_dev.dev.parent = dev;
++      platform_device_register(&gta02_bl_dev);
++}
++
++const struct jbt6k74_platform_data jbt6k74_pdata = {
++      .reset          = gta02_jbt6k74_reset,
++      .probe_completed = gta02_jbt6k74_probe_completed,
++};
++
++#if 0 /* currently this is not used and we use gpio spi */
++static struct glamo_spi_info glamo_spi_cfg = {
++      .board_size     = ARRAY_SIZE(gta02_spi_board_info),
++      .board_info     = gta02_spi_board_info,
++};
++#endif /* 0 */
++
++static struct glamo_spigpio_info glamo_spigpio_cfg = {
++      .pin_clk        = GLAMO_GPIO10_OUTPUT,
++      .pin_mosi       = GLAMO_GPIO11_OUTPUT,
++      .pin_cs         = GLAMO_GPIO12_OUTPUT,
++      .pin_miso       = 0,
++      .bus_num        = 2,
++};
++
++/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
++
++void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
++{
++      struct lis302dl_platform_data *pdata = lis->pdata;
++
++      if (!resume) {
++               /*
++               * we don't want to power them with a high level
++               * because GSENSOR_3V3 is not up during suspend
++               */
++              s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
++              s3c2410_gpio_setpin(pdata->pin_clk, 0);
++              s3c2410_gpio_setpin(pdata->pin_mosi, 0);
++              /* misnomer: it is a pullDOWN in 2442 */
++              s3c2410_gpio_pullup(pdata->pin_miso, 1);
++              return;
++      }
++
++      /* back to normal */
++      s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
++      s3c2410_gpio_setpin(pdata->pin_clk, 1);
++      /* misnomer: it is a pullDOWN in 2442 */
++      s3c2410_gpio_pullup(pdata->pin_miso, 0);
++
++      s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
++
++}
++
++struct lis302dl_platform_data lis302_pdata_top = {
++              .name           = "lis302-1 (top)",
++              .pin_chip_select= S3C2410_GPD12,
++              .pin_clk        = S3C2410_GPG7,
++              .pin_mosi       = S3C2410_GPG6,
++              .pin_miso       = S3C2410_GPG5,
++              .interrupt      = GTA02_IRQ_GSENSOR_1,
++              .open_drain     = 1, /* altered at runtime by PCB rev */
++              .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
++struct lis302dl_platform_data lis302_pdata_bottom = {
++              .name           = "lis302-2 (bottom)",
++              .pin_chip_select= S3C2410_GPD13,
++              .pin_clk        = S3C2410_GPG7,
++              .pin_mosi       = S3C2410_GPG6,
++              .pin_miso       = S3C2410_GPG5,
++              .interrupt      = GTA02_IRQ_GSENSOR_2,
++              .open_drain     = 1, /* altered at runtime by PCB rev */
++              .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
++static struct spi_board_info gta02_spi_board_info[] = {
++      {
++              .modalias       = "jbt6k74",
++              /* platform_data */
++              .platform_data  = &jbt6k74_pdata,
++              /* controller_data */
++              /* irq */
++              .max_speed_hz   = 100 * 1000,
++              .bus_num        = 2,
++              /* chip_select */
++      },
++      {
++              .modalias       = "lis302dl",
++              /* platform_data */
++              .platform_data  = &lis302_pdata_top,
++              /* controller_data */
++              /* irq */
++              .max_speed_hz   = 100 * 1000,
++              .bus_num        = 3,
++              .chip_select    = 0,
++      },
++
++      {
++              .modalias       = "lis302dl",
++              /* platform_data */
++              .platform_data  = &lis302_pdata_bottom,
++              /* controller_data */
++              /* irq */
++              .max_speed_hz   = 100 * 1000,
++              .bus_num        = 3,
++              .chip_select    = 1,
++      },
++
++};
++
++static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
++{
++
++      /*
++       * Huh... "quirk"... CS on this device is not really "CS" like you can
++       * expect.
++       *
++       * When it is 0 it selects SPI interface mode.
++       * When it is 1 it selects I2C interface mode.
++       *
++       * Because we have 2 devices on one interface we have to make sure
++       * that the "disabled" device (actually in I2C mode) don't think we're
++       * talking to it.
++       *
++       * When we talk to the "enabled" device, the "disabled" device sees
++       * the clocks as I2C clocks, creating havoc.
++       *
++       * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
++       * must ensure this is never issued.
++       */
++
++      int cs_gpio, other_cs_gpio;
++
++      cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
++      other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
++      
++
++      if (cs == BITBANG_CS_ACTIVE) {
++              s3c2410_gpio_setpin(other_cs_gpio, 1);
++              s3c2410_gpio_setpin(cs_gpio, 1);
++              s3c2410_gpio_setpin(info->pin_clk, 1);
++              s3c2410_gpio_setpin(cs_gpio, 0);
++      } else {
++              s3c2410_gpio_setpin(cs_gpio, 1);
++              s3c2410_gpio_setpin(other_cs_gpio, 1);
++      } 
++}
++
++static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
++      .pin_clk        = S3C2410_GPG7,
++      .pin_mosi       = S3C2410_GPG6,
++      .pin_miso       = S3C2410_GPG5,
++      .bus_num        = 3,
++      .num_chipselect = 2,
++      .chip_select    = gta02_lis302_chip_select,
++      .non_blocking_transfer = 1,
++};
++
++static struct platform_device gta02_spi_gpio_dev = {
++      .name           = "spi_s3c24xx_gpio",
++      .dev = {
++              .platform_data = &gta02_spigpio_cfg,
++      },
++};
++
++/*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
++
++static struct resource gta02_led_resources[] = {
++      {
++              .name   = "gta02-power:orange",
++              .start  = GTA02_GPIO_PWR_LED1,
++              .end    = GTA02_GPIO_PWR_LED1,
++      }, {
++              .name   = "gta02-power:blue",
++              .start  = GTA02_GPIO_PWR_LED2,
++              .end    = GTA02_GPIO_PWR_LED2,
++      }, {
++              .name   = "gta02-aux:red",
++              .start  = GTA02_GPIO_AUX_LED,
++              .end    = GTA02_GPIO_AUX_LED,
++      },
++};
++
++struct platform_device gta02_led_dev = {
++      .name           = "gta02-led",
++      .num_resources  = ARRAY_SIZE(gta02_led_resources),
++      .resource       = gta02_led_resources,
++};
++
++static struct resource gta02_button_resources[] = {
++      [0] = {
++              .start = GTA02_GPIO_AUX_KEY,
++              .end   = GTA02_GPIO_AUX_KEY,
++      },
++      [1] = {
++              .start = GTA02_GPIO_HOLD_KEY,
++              .end   = GTA02_GPIO_HOLD_KEY,
++      },
++      [2] = {
++              .start = GTA02_GPIO_JACK_INSERT,
++              .end   = GTA02_GPIO_JACK_INSERT,
++      },
++      [3] = {
++              .start = 0,
++              .end   = 0,
++      },
++      [4] = {
++              .start = 0,
++              .end   = 0,
++      },
++};
++
++static struct platform_device gta02_button_dev = {
++      .name           = "neo1973-button",
++      .num_resources  = ARRAY_SIZE(gta02_button_resources),
++      .resource       = gta02_button_resources,
++};
++
++
++static struct platform_device gta02_pm_usbhost_dev = {
++      .name           = "neo1973-pm-host",
++};
++
++
++/* USB */
++static struct s3c2410_hcd_info gta02_usb_info = {
++      .port[0]        = {
++              .flags  = S3C_HCDFLG_USED,
++      },
++      .port[1]        = {
++              .flags  = 0,
++      },
++};
++
++static int glamo_irq_is_wired(void)
++{
++      int rc;
++      int count = 0;
++
++      /*
++      * GTA02 S-Media IRQs prior to A5 are broken due to a lack of
++      * a pullup on the INT# line.  Check for the bad behaviour.
++      */
++      s3c2410_gpio_setpin(S3C2410_GPG4, 0);
++      s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
++      s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
++      /*
++      * we force it low ourselves for a moment and resume being input.
++      * If there is a pullup, it won't stay low for long.  But if the
++      * level converter is there as on < A5 revision, the weak keeper
++      * on the input of the LC will hold the line low indefinitiely
++      */
++      do
++              rc = s3c2410_gpio_getpin(S3C2410_GPG4);
++      while ((!rc) && ((count++) < 10));
++      if (rc) { /* it got pulled back up, it's good */
++              printk(KERN_INFO "Detected S-Media IRQ# pullup, "
++              "enabling interrupt\n");
++              return 0;
++      } else  /* Gah we can't work with this level converter */
++              printk(KERN_WARNING "** Detected bad IRQ# circuit found"
++              " on pre-A5 GTA02: S-Media interrupt disabled **\n");
++      return -ENODEV;
++}
++
++static int gta02_glamo_can_set_mmc_power(void)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++              case GTA02v3_SYSTEM_REV:
++              case GTA02v4_SYSTEM_REV:
++              case GTA02v5_SYSTEM_REV:
++              case GTA02v6_SYSTEM_REV:
++                      return 1;
++      }
++
++      return 0;
++}
++
++/* Smedia Glamo 3362 */
++
++/*
++ * we crank down SD Card clock dynamically when GPS is powered
++ */
++
++static int gta02_glamo_mci_use_slow(void)
++{
++      return neo1973_pm_gps_is_on();
++}
++
++static void gta02_glamo_external_reset(int level)
++{
++      s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
++      s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
++}
++
++static struct glamofb_platform_data gta02_glamo_pdata = {
++      .width          = 43,
++      .height         = 58,
++       /* 24.5MHz --> 40.816ns */
++      .pixclock       = 40816,
++      .left_margin    = 8,
++      .right_margin   = 16,
++      .upper_margin   = 2,
++      .lower_margin   = 16,
++      .hsync_len      = 8,
++      .vsync_len      = 2,
++      .fb_mem_size    = 0x400000, /* glamo has 8 megs of SRAM. we use 4 */
++      .xres           = {
++              .min    = 240,
++              .max    = 640,
++              .defval = 480,
++      },
++      .yres           = {
++              .min    = 320,
++              .max    = 640,
++              .defval = 640,
++      },
++      .bpp            = {
++              .min    = 16,
++              .max    = 16,
++              .defval = 16,
++      },
++      //.spi_info     = &glamo_spi_cfg,
++      .spigpio_info   = &glamo_spigpio_cfg,
++
++      /* glamo MMC function platform data */
++      .mmc_dev = &gta02_mmc_dev,
++      .glamo_can_set_mci_power = gta02_glamo_can_set_mmc_power,
++      .glamo_mci_use_slow = gta02_glamo_mci_use_slow,
++      .glamo_irq_is_wired = glamo_irq_is_wired,
++      .glamo_external_reset = gta02_glamo_external_reset
++};
++
++static struct resource gta02_glamo_resources[] = {
++      [0] = {
++              .start  = S3C2410_CS1,
++              .end    = S3C2410_CS1 + 0x1000000 - 1,
++              .flags  = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start  = GTA02_IRQ_3D,
++              .end    = GTA02_IRQ_3D,
++              .flags  = IORESOURCE_IRQ,
++      },
++      [2] = {
++              .start = GTA02_GPIO_3D_RESET,
++              .end   = GTA02_GPIO_3D_RESET,
++      },
++};
++
++static struct platform_device gta02_glamo_dev = {
++      .name           = "glamo3362",
++      .num_resources  = ARRAY_SIZE(gta02_glamo_resources),
++      .resource       = gta02_glamo_resources,
++      .dev            = {
++              .platform_data  = &gta02_glamo_pdata,
++      },
++};
++
++static void mangle_glamo_res_by_system_rev(void)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA02v1_SYSTEM_REV:
++              break;
++      default:
++              gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
++              gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
++              break;
++      }
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA02v1_SYSTEM_REV:
++      case GTA02v2_SYSTEM_REV:
++      case GTA02v3_SYSTEM_REV:
++      /* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
++              /* The hardware is missing a pull-up resistor and thus can't
++               * support the Smedia Glamo IRQ */
++              gta02_glamo_resources[1].start = 0;
++              gta02_glamo_resources[1].end = 0;
++              break;
++      }
++}
++
++static void __init gta02_map_io(void)
++{
++      s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
++      s3c24xx_init_clocks(12000000);
++      s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
++}
++
++static irqreturn_t gta02_modem_irq(int irq, void *param)
++{
++      printk(KERN_DEBUG "modem wakeup interrupt\n");
++      gta_gsm_interrupts++;
++      return IRQ_HANDLED;
++}
++
++static irqreturn_t ar6000_wow_irq(int irq, void *param)
++{
++      printk(KERN_DEBUG "ar6000_wow interrupt\n");
++      return IRQ_HANDLED;
++}
++
++/*
++ * hardware_ecc=1|0
++ */
++static char hardware_ecc_str[4] __initdata = "";
++
++static int __init hardware_ecc_setup(char *str)
++{
++      if (str)
++              strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
++      return 1;
++}
++
++__setup("hardware_ecc=", hardware_ecc_setup);
++
++/* these are the guys that don't need to be children of PMU */
++
++static struct platform_device *gta02_devices[] __initdata = {
++      &gta02_version_device,
++      &s3c_device_usb,
++      &s3c_device_wdt,
++      &gta02_memconfig_device,
++      &s3c_device_sdi,
++      &s3c_device_usbgadget,
++      &s3c_device_nand,
++      &gta02_nor_flash,
++
++      &s3c24xx_pwm_device,
++      &gta02_led_dev,
++      &gta02_pm_wlan_dev, /* not dependent on PMU */
++
++      &s3c_device_iis,
++      &s3c_device_i2c0,
++};
++
++/* these guys DO need to be children of PMU */
++
++static struct platform_device *gta02_devices_pmu_children[] = {
++      &s3c_device_ts, /* input 1 */
++      &gta02_pm_gsm_dev,
++      &gta02_pm_usbhost_dev,
++      &gta02_spi_gpio_dev, /* input 2 and 3 */
++      &gta02_button_dev, /* input 4 */
++      &gta02_resume_reason_device,
++};
++
++static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
++{
++      struct platform_device *regulator, *pdev;
++
++      gta02_pcf = pcf;
++
++      regulator = pcf->regulator_pdev[id];
++
++      switch(id) {
++              case PCF50633_REGULATOR_LDO4:
++                      pdev = &gta01_pm_bt_dev;
++                      break;
++              case PCF50633_REGULATOR_LDO5:
++                      pdev = &gta01_pm_gps_dev;
++                      break;
++              case PCF50633_REGULATOR_HCLDO:
++                      pdev = &gta02_glamo_dev;
++                      break;
++              default:
++                      return; 
++      }
++      
++      pdev->dev.parent = &regulator->dev;
++      platform_device_register(pdev);
++}
++
++/* this is called when pc50633 is probed, unfortunately quite late in the
++ * day since it is an I2C bus device.  Here we can belatedly define some
++ * platform devices with the advantage that we can mark the pcf50633 as the
++ * parent.  This makes them get suspended and resumed with their parent
++ * the pcf50633 still around.
++ */
++
++static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
++{
++      int n;
++
++      for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
++              gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
++
++      mangle_glamo_res_by_system_rev();
++      platform_add_devices(gta02_devices_pmu_children,
++                                      ARRAY_SIZE(gta02_devices_pmu_children));
++}
++
++static void gta02_poweroff(void)
++{
++      pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
++                PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
++}
++
++static void __init gta02_machine_init(void)
++{
++      int rc;
++
++      /* set the panic callback to make AUX blink fast */
++      panic_blink = gta02_panic_blink;
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA02v6_SYSTEM_REV:
++              /* we need push-pull interrupt from motion sensors */
++              lis302_pdata_top.open_drain = 0;
++              lis302_pdata_bottom.open_drain = 0;
++              break;
++      default:
++              break;
++      }
++
++      spin_lock_init(&motion_irq_lock);
++
++#ifdef CONFIG_CHARGER_PCF50633
++      INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
++#endif
++
++      /* Glamo chip select optimization */
++/*     *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
++
++      /* do not force soft ecc if we are asked to use hardware_ecc */
++      if (hardware_ecc_str[0] == '1')
++              gta02_nand_info.software_ecc = 0;
++
++      s3c_device_usb.dev.platform_data = &gta02_usb_info;
++      s3c_device_nand.dev.platform_data = &gta02_nand_info;
++      s3c_device_sdi.dev.platform_data = &gta02_s3c_mmc_cfg;
++
++      /* acc sensor chip selects */
++      s3c2410_gpio_setpin(S3C2410_GPD12, 1);
++      s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_setpin(S3C2410_GPD13, 1);
++      s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
++
++      s3c24xx_udc_set_platdata(&gta02_udc_cfg);
++      s3c_i2c0_set_platdata(NULL);
++      set_s3c2410ts_info(&gta02_ts_cfg);
++      
++      mangle_glamo_res_by_system_rev();
++
++      i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
++      spi_register_board_info(gta02_spi_board_info,
++                              ARRAY_SIZE(gta02_spi_board_info));
++
++      mangle_pmu_pdata_by_system_rev();
++
++      platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
++
++      s3c_pm_init();
++
++      /* Make sure the modem can wake us up */
++      set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
++      rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
++                       "modem", NULL);
++      if (rc < 0)
++              printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
++      enable_irq_wake(GTA02_IRQ_MODEM);
++
++      /* Make sure the wifi module can wake us up*/
++      set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
++      rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
++                      "ar6000", NULL);
++
++      if (rc < 0)
++              printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
++      enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
++
++      pm_power_off = gta02_poweroff;
++
++      /* Register the HDQ and vibrator as children of pwm device */
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++      gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
++      platform_device_register(&gta02_hdq_device);
++#endif
++#ifdef CONFIG_LEDS_NEO1973_VIBRATOR
++      gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; 
++      platform_device_register(&gta02_vibrator_dev);
++#endif
++}
++
++void DEBUG_LED(int n)
++{
++//    int *p = NULL;
++      switch (n) {
++      case 0:
++              neo1973_gpb_setpin(GTA02_GPIO_PWR_LED1, 1);
++              break;
++      case 1:
++              neo1973_gpb_setpin(GTA02_GPIO_PWR_LED2, 1);
++              break;
++      default:
++              neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
++              break;
++      }
++//    printk(KERN_ERR"die %d\n", *p);
++}
++EXPORT_SYMBOL_GPL(DEBUG_LED);
++
++MACHINE_START(NEO1973_GTA02, "GTA02")
++      .phys_io        = S3C2410_PA_UART,
++      .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++      .boot_params    = S3C2410_SDRAM_PA + 0x100,
++      .map_io         = gta02_map_io,
++      .init_irq       = s3c24xx_init_irq,
++      .init_machine   = gta02_machine_init,
++      .timer          = &s3c24xx_timer,
++MACHINE_END
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/Makefile       2009-05-10 22:05:02.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -9,8 +9,11 @@
+ obj-n                         :=
+ obj-                          :=
++obj-$(CONFIG_S3C2440_C_FIQ)   += fiq_c_isr.o
++
+ obj-$(CONFIG_CPU_S3C2442)     += s3c2442.o
+ obj-$(CONFIG_CPU_S3C2442)     += clock.o
++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+ # Machine support
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/s3c2442.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/s3c2442.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2442/s3c2442.c      2009-05-10 22:05:02.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2442/s3c2442.c   2009-05-10 22:27:59.000000000 +0200
+@@ -21,6 +21,7 @@
+ #include <plat/s3c2442.h>
+ #include <plat/cpu.h>
++#include <plat/devs.h>
+ static struct sys_device s3c2442_sysdev = {
+       .cls            = &s3c2442_sysclass,
+@@ -30,5 +31,8 @@
+ {
+       printk("S3C2442: Initialising architecture\n");
++      /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++      s3c_device_sdi.name = "s3c2440-sdi";
++
+       return sysdev_register(&s3c2442_sysdev);
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2443/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2443/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c2443/dma.c  2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c2443/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -20,16 +20,17 @@
+ #include <mach/dma.h>
+-#include <plat/dma.h>
++#include <plat/dma-plat.h>
+ #include <plat/cpu.h>
+ #include <plat/regs-serial.h>
+ #include <mach/regs-gpio.h>
+ #include <plat/regs-ac97.h>
++#include <plat/regs-dma.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-lcd.h>
+ #include <mach/regs-sdi.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include <plat/regs-spi.h>
+ #define MAP(x) { \
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c24a0/include/mach/io.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c24a0/include/mach/io.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c24a0/include/mach/io.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c24a0/include/mach/io.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,16 @@
++/* arch/arm/mach-s3c24a0/include/mach/io.h
++ *
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben-linux@fluff.org>
++ *
++ * IO access and mapping routines for the S3C24A0
++ */
++
++#ifndef __ASM_ARM_ARCH_IO_H
++#define __ASM_ARM_ARCH_IO_H
++
++/* No current ISA/PCI bus support. */
++#define __io(a)               ((void __iomem *)(a))
++#define __mem_pci(a)  (a)
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c24a0/include/mach/irqs.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c24a0/include/mach/irqs.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c24a0/include/mach/irqs.h    2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c24a0/include/mach/irqs.h 2009-05-10 22:27:59.000000000 +0200
+@@ -70,6 +70,8 @@
+ #define IRQ_EINT17    S3C2410_IRQ(49)
+ #define IRQ_EINT18    S3C2410_IRQ(50)
++#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
++
+ /* SUB IRQS */
+ #define IRQ_S3CUART_RX0               S3C2410_IRQ(51) /* 67 */
+ #define IRQ_S3CUART_TX0               S3C2410_IRQ(52)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/dma.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/dma.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/dma.h     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/dma.h  2009-05-10 22:27:59.000000000 +0200
+@@ -11,6 +11,63 @@
+ #ifndef __ASM_ARCH_DMA_H
+ #define __ASM_ARCH_DMA_H __FILE__
+-/* currently nothing here, placeholder */
++#define S3C_DMA_CHANNELS      (16)
++
++/* see mach-s3c2410/dma.h for notes on dma channel numbers */
++
++/* Note, for the S3C64XX architecture we keep the DMACH_
++ * defines in the order they are allocated to [S]DMA0/[S]DMA1
++ * so that is easy to do DHACH_ -> DMA controller conversion
++ */ 
++enum dma_ch {
++      /* DMA0/SDMA0 */
++      DMACH_UART0 = 0,
++      DMACH_UART0_SRC2,
++      DMACH_UART1,
++      DMACH_UART1_SRC2,
++      DMACH_UART2,
++      DMACH_UART2_SRC2,
++      DMACH_UART3,
++      DMACH_UART3_SRC2,
++      DMACH_PCM0_TX,
++      DMACH_PCM0_RX,
++      DMACH_I2S0_OUT,
++      DMACH_I2S0_IN,
++      DMACH_SPI0_TX,
++      DMACH_SPI0_RX,
++      DMACH_HSI_I2SV40_TX,
++      DMACH_HSI_I2SV40_RX,
++
++      /* DMA1/SDMA1 */
++      DMACH_PCM1_TX = 16,
++      DMACH_PCM1_RX,
++      DMACH_I2S1_OUT,
++      DMACH_I2S1_IN,
++      DMACH_SPI1_TX,
++      DMACH_SPI1_RX,
++      DMACH_AC97_PCMOUT,
++      DMACH_AC97_PCMIN,
++      DMACH_AC97_MICIN,
++      DMACH_PWM, 
++      DMACH_IRDA,
++      DMACH_EXTERNAL,
++      DMACH_RES1,
++      DMACH_RES2,
++      DMACH_SECURITY_RX,      /* SDMA1 only */
++      DMACH_SECURITY_TX,      /* SDMA1 only */
++      DMACH_MAX               /* the end */
++};
++
++static __inline__ int s3c_dma_has_circular(void)
++{
++      /* we will be supporting ciruclar buffers as soon as we have DMA
++       * engine support.
++       */
++      return 1;
++}
++
++#define S3C2410_DMAF_CIRCULAR         (1 << 0)
++
++#include <plat/dma.h>
+ #endif /* __ASM_ARCH_IRQ_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/map.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/map.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/map.h     2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/map.h  2009-05-10 22:27:59.000000000 +0200
+@@ -40,6 +40,8 @@
+ #define S3C64XX_PA_FB         (0x77100000)
+ #define S3C64XX_PA_SYSCON     (0x7E00F000)
++#define S3C64XX_PA_IIS0               (0x7F002000)
++#define S3C64XX_PA_IIS1               (0x7F003000)
+ #define S3C64XX_PA_TIMER      (0x7F006000)
+ #define S3C64XX_PA_IIC0               (0x7F004000)
+ #define S3C64XX_PA_IIC1               (0x7F00F000)
+@@ -49,12 +51,21 @@
+ #define S3C64XX_SZ_GPIO               SZ_4K
+ #define S3C64XX_PA_SDRAM      (0x50000000)
++#define S3C64XX_PA_TZIC0      (0x71000000)
++#define S3C64XX_PA_TZIC1      (0x71100000)
+ #define S3C64XX_PA_VIC0               (0x71200000)
+ #define S3C64XX_PA_VIC1               (0x71300000)
++#define S3C64XX_PA_MODEM      (0x74108000)
++#define S3C64XX_VA_MODEM      S3C_ADDR(0x00600000)
++
++#define S3C64XX_PA_USBHOST    (0x74300000)
++
+ /* place VICs close together */
+ #define S3C_VA_VIC0           (S3C_VA_IRQ + 0x00)
+ #define S3C_VA_VIC1           (S3C_VA_IRQ + 0x10000)
++#define S3C_VA_TZIC0          (S3C_VA_IRQ + 0x20000)
++#define S3C_VA_TZIC1          (S3C_VA_IRQ + 0x30000)
+ /* compatibiltiy defines. */
+ #define S3C_PA_TIMER          S3C64XX_PA_TIMER
+@@ -64,5 +75,12 @@
+ #define S3C_PA_IIC            S3C64XX_PA_IIC0
+ #define S3C_PA_IIC1           S3C64XX_PA_IIC1
+ #define S3C_PA_FB             S3C64XX_PA_FB
++#define S3C_PA_USBHOST                S3C64XX_PA_USBHOST
++
++#define S3C64XX_VA_OTG                S3C_VA_OTG
++#define S3C64XX_PA_OTG                (0x7C000000)
++
++#define S3C64XX_VA_OTGSFR     S3C_VA_OTGSFR
++#define S3C64XX_PA_OTGSFR     (0x7C100000)
+ #endif /* __ASM_ARCH_6400_MAP_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/regs-clock.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/regs-clock.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/regs-clock.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,16 @@
++/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    http://armlinux.simtec.co.uk/
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C64XX - clock register compatibility with s3c24xx
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <plat/regs-clock.h>
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/system.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/system.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6400/include/mach/system.h  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6400/include/mach/system.h       2009-05-10 22:27:59.000000000 +0200
+@@ -11,9 +11,29 @@
+ #ifndef __ASM_ARCH_SYSTEM_H
+ #define __ASM_ARCH_SYSTEM_H __FILE__
++#include <linux/io.h>
++#include <mach/map.h>
++
++#include <plat/regs-sys.h>
++#include <plat/regs-syscon-power.h>
++
+ static void arch_idle(void)
+ {
+-      /* nothing here yet */
++      unsigned long flags;
++      u32 mode;
++
++      /* ensure that if we execute the cpu idle sequence that we
++       * go into idle mode instead of powering off. */
++
++      local_irq_save(flags);
++      mode = __raw_readl(S3C64XX_PWR_CFG);
++      mode &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
++      mode |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
++      __raw_writel(mode, S3C64XX_PWR_CFG);
++
++      local_irq_restore(flags);
++
++      cpu_do_idle();
+ }
+ static void arch_reset(char mode)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/include/mach/om-3d7k.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/include/mach/om-3d7k.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/include/mach/om-3d7k.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/include/mach/om-3d7k.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,98 @@
++/*
++ * 3D7K GPIO Mappings
++ *
++ * (C) 2008 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#ifndef _OM_3D7K_H
++#define _OM_3D7K_H
++
++#include <mach/gpio.h>
++#include <mach/irqs.h>
++#include <linux/mfd/pcf50633/core.h>
++
++extern struct pcf50633 *om_3d7k_pcf;
++
++/* ATAG_REVISION from bootloader */
++#define OM_3D7Kv1_SYSTEM_REV  0x00000001
++
++#define OM_3D7K_GPIO_VIBRATOR_ON      S3C64XX_GPF(13)
++#define OM_3D7K_GPIO_CLKOUT           S3C64XX_GPF(14)
++
++#define OM_3D7K_GPIO_ACCEL_MISO               S3C64XX_GPC(0)
++#define OM_3D7K_GPIO_ACCEL_CLK                S3C64XX_GPC(1)
++#define OM_3D7K_GPIO_ACCEL_MOSI               S3C64XX_GPC(2)
++
++#define OM_3D7K_GPIO_LCM_MISO         S3C64XX_GPC(4)
++#define OM_3D7K_GPIO_LCM_CLK          S3C64XX_GPC(5)
++#define OM_3D7K_GPIO_LCM_MOSI         S3C64XX_GPC(6)
++#define OM_3D7K_GPIO_LCM_CS           S3C64XX_GPC(7)
++
++#define OM_3D7K_GPIO_BTPCM_SHARED_SCLK        S3C64XX_GPE(0)
++#define OM_3D7K_GPIO_BTPCM_SHARED_EXTCLK      S3C64XX_GPE(1)
++#define OM_3D7K_GPIO_BTPCM_SHARED_FSYNC       S3C64XX_GPE(2)
++#define OM_3D7K_GPIO_BTPCM_SHARED_SIN S3C64XX_GPE(3)
++#define OM_3D7K_GPIO_BTPCM_SHARED_SOUT        S3C64XX_GPE(4)
++
++#define OM_3D7K_GPIO_WLAN_RESET               S3C64XX_GPH(6)
++#define OM_3D7K_GPIO_HDQ              S3C64XX_GPH(7)
++#define OM_3D7K_GPIO_WLAN_PWRDN               S3C64XX_GPH(8)
++
++#define OM_3D7K_GPIO_VERSION2         S3C64XX_GPI(0)
++#define OM_3D7K_GPIO_VERSION1         S3C64XX_GPI(1)
++#define OM_3D7K_GPIO_VERSION0         S3C64XX_GPI(8)
++
++#define OM_3D7K_GPIO_NWLAN_POWER      S3C64XX_GPK(0)
++#define OM_3D7K_GPIO_MODEM_ON         S3C64XX_GPK(2)
++#define OM_3D7K_GPIO_LED_TRIG                 S3C64XX_GPK(3)
++#define OM_3D7K_GPIO_LED_EN           S3C64XX_GPK(4)
++#define OM_3D7K_GPIO_LCM_RESET                S3C64XX_GPK(6)
++
++#define OM_3D7K_GPIO_LCM_SD           S3C64XX_GPL(0)
++
++#define OM_3D7K_GPIO_TP_RESET         S3C64XX_GPM(0)
++#define OM_3D7K_GPIO_GPS_LNA_EN               S3C64XX_GPM(2)
++
++#define OM_3D7K_GPIO_USB_FLT          S3C64XX_GPM(4)
++#define OM_3D7K_GPIO_USB_OC           S3C64XX_GPM(5)
++
++#define OM_3D7K_GPIO_ACCEL_INT1               S3C64XX_GPN(0)
++#define OM_3D7K_GPIO_KEY_MINUS                S3C64XX_GPN(1)
++#define OM_3D7K_GPIO_KEY_PLUS         S3C64XX_GPN(2)
++#define OM_3D7K_GPIO_PWR_IND          S3C64XX_GPN(3)
++#define OM_3D7K_GPIO_PWR_IRQ          S3C64XX_GPN(4)
++#define OM_3D7K_GPIO_TOUCH            S3C64XX_GPN(5)
++#define OM_3D7K_GPIO_JACK_INSERT      S3C64XX_GPN(6)
++#define OM_3D7K_GPIO_GPS_INT          S3C64XX_GPN(7)
++#define OM_3D7K_GPIO_HOLD             S3C64XX_GPN(8)
++#define OM_3D7K_GPIO_WLAN_WAKEUP      S3C64XX_GPN(9)
++#define OM_3D7K_GPIO_ACCEL_INT2               S3C64XX_GPN(10)
++#define OM_3D7K_GPIO_IO1              S3C64XX_GPN(11)
++#define OM_3D7K_GPIO_NONKEYWAKE               S3C64XX_GPN(12)
++
++#define OM_3D7K_GPIO_N_MODEM_RESET    S3C64XX_GPO(1)
++
++#define OM_3D7K_IRQ_GSENSOR_1 S3C_EINT(0)
++#define OM_3D7K_IRQ_KEY_MINUS S3C_EINT(1)
++#define OM_3D7K_IRQ_KEY_PLUS  S3C_EINT(2)
++#define OM_3D7K_IRQ_PWR_IND   S3C_EINT(3)
++#define OM_3D7K_IRQ_PMU               S3C_EINT(4)
++#define OM_3D7K_IRQ_TOUCH     S3C_EINT(5)
++#define OM_3D7K_IRQ_JACK_INSERT       S3C_EINT(6)
++#define OM_3D7K_IRQ_GPS_INT   S3C_EINT(7)
++#define OM_3D7K_IRQ_NHOLD     S3C_EINT(8)
++#define OM_3D7K_IRQ_WLAN_WAKEUP       S3C_EINT(9)
++#define OM_3D7K_IRQ_GSENSOR_2 S3C_EINT(10)
++#define OM_3D7K_IRQ_IO1               S3C_EINT(11)
++#define OM_3D7K_IRQ_NONKEYWAKE        S3C_EINT(12)
++
++#define OM_3D7K_IRQ_LED       IRQ_EINT_GROUP(6, 9)
++
++#endif /* _OM_3D7K_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/include/mach/spi-gpio.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/include/mach/spi-gpio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/include/mach/spi-gpio.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/include/mach/spi-gpio.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,28 @@
++/* arch/arm/mach-s3c6400/include/mach/spi-gpio.h
++ *
++ * Copyright (c) 2006 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C64XX - SPI Controller platfrom_device info
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#ifndef __ASM_ARCH_SPIGPIO_H
++#define __ASM_ARCH_SPIGPIO_H __FILE__
++
++struct s3c64xx_spigpio_info {
++      unsigned long            pin_clk;
++      unsigned long            pin_mosi;
++      unsigned long            pin_miso;
++
++      int                      bus_num;
++      int                      num_chipselect;
++
++      void (*chip_select)(struct s3c64xx_spigpio_info *spi, int csid, int cs);
++};
++
++
++#endif /* __ASM_ARCH_SPIGPIO_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/Kconfig        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -26,6 +26,7 @@
+       select S3C_DEV_HSMMC1
+       select S3C_DEV_I2C1
+       select S3C_DEV_FB
++      select S3C_DEV_USB_HOST
+       select S3C6410_SETUP_SDHCI
+       select S3C64XX_SETUP_I2C1
+       select S3C64XX_SETUP_FB_24BPP
+@@ -60,3 +61,25 @@
+         channels 0 and 1 are the same.
+ endchoice
++
++config MACH_OM_3D7K
++        bool "Openmoko 3D7K Phone"
++      select CPU_S3C6410
++      select S3C_DEV_HSMMC
++      select S3C_DEV_HSMMC1
++      select S3C_DEV_I2C1
++      select S3C_DEV_USB_HOST
++      select S3C6410_SETUP_SDHCI
++      select S3C64XX_SETUP_I2C1
++      select S3C_DEV_FB
++      select S3C_DEV_CAMIF
++      select S3C64XX_SETUP_FB_24BPP
++#     select SENSORS_PCF50633
++      select POWER_SUPPLY
++      select HDQ_GPIO_BITBANG
++      select S3C_PWM
++      select FIQ
++      select MACH_NEO1973
++      help
++          Machine support for the Openmoko 3D7K Phone
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-om-3d7k.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/mach-om-3d7k.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-om-3d7k.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/mach-om-3d7k.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1196 @@
++/* linux/arch/arm/mach-s3c6410/mach-om-3d7k.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Andy Green <andy@openmoko.org>
++ *
++ * based on mach_smdk6410.c which is
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++*/
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/serial_core.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/i2c.h>
++#include <linux/fb.h>
++#include <linux/delay.h>
++#include <linux/lis302dl.h>
++#include <linux/lp5521.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/l1k002.h>
++#include <linux/pcap7200.h>
++#include <linux/bq27000_battery.h>
++#include <linux/hdq.h>
++#include <linux/jbt6k74.h>
++
++#include <video/platform_lcd.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <mach/hardware.h>
++#include <asm/hardware/vic.h>
++#include <asm/hardware/tzic-sp890.h>
++#include <mach/map.h>
++#include <mach/regs-fb.h>
++#include <mach/spi-gpio.h>
++
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/fiq.h>
++
++#include <plat/regs-serial.h>
++#include <plat/regs-timer.h>
++#include <plat/regs-gpio.h>
++#include <plat/iic.h>
++#include <plat/fb.h>
++#include <plat/gpio-cfg.h>
++#include <plat/pm.h>
++#include <plat/pwm.h>
++
++#include <plat/s3c6410.h>
++#include <plat/clock.h>
++#include <plat/devs.h>
++#include <plat/cpu.h>
++#include <plat/tzic-sp890.h>
++#include <plat/usb-control.h>
++
++/* #include <plat/udc.h> */
++#include <linux/i2c.h>
++#include <linux/backlight.h>
++#include <linux/regulator/machine.h>
++
++#include <mach/om-3d7k.h>
++
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/mfd/pcf50633/mbc.h>
++#include <linux/mfd/pcf50633/adc.h>
++#include <linux/mfd/pcf50633/gpio.h>
++#include <linux/mfd/pcf50633/pmic.h>
++
++#include <plat/regs-usb-hs-otg.h>
++
++extern struct platform_device s3c_device_usbgadget;
++extern struct platform_device s3c_device_camif; /* @@@ change plat/devs.h */
++
++
++/* -------------------------------------------------------------------------------
++ * OM_3D7K FIQ related
++ *
++ * Calls into vibrator and hdq and based on the return values
++ * determines if we the FIQ source be kept alive
++ */
++
++#define DIVISOR_FROM_US(x) ((x) * 23)
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
++extern int hdq_fiq_handler(void);
++#endif
++
++/* Global data related to our fiq source */
++static u32 om_3d7k_fiq_ack_mask;
++static u32 om_3d7k_fiq_mod_mask;
++static struct s3c2410_pwm om_3d7k_fiq_pwm_timer;
++static u16 om_3d7k_fiq_timer_index;
++static int om_3d7k_fiq_irq;
++
++/* Convinience defines */
++#define S3C6410_INTMSK        (S3C_VA_VIC0 + VIC_INT_ENABLE)
++#define S3C6410_INTMOD        (S3C_VA_VIC0 + VIC_INT_SELECT)
++
++
++
++static void om_3d7k_fiq_handler(void)
++{
++      u16 divisor = 0xffff;
++
++      /* Vibrator servicing */
++
++      /* disable further timer interrupts if nobody has any work
++       * or adjust rate according to who still has work
++       *
++       * CAUTION: it means forground code must disable FIQ around
++       * its own non-atomic S3C2410_INTMSK changes... not common
++       * thankfully and taken care of by the fiq-basis patch
++       */
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++      if (hdq_fiq_handler())
++              divisor = (u16)FIQ_DIVISOR_HDQ;
++#endif
++
++      if (divisor == 0xffff) /* mask the fiq irq source */
++              __raw_writel((__raw_readl(S3C64XX_TINT_CSTAT) & 0x1f) & ~(1 << 3),
++                                                          S3C64XX_TINT_CSTAT);
++      else /* still working, maybe at a different rate */
++              __raw_writel(divisor, S3C2410_TCNTB(om_3d7k_fiq_timer_index));
++
++      __raw_writel((__raw_readl(S3C64XX_TINT_CSTAT) & 0x1f ) | 1 << 8 , S3C64XX_TINT_CSTAT);
++
++}
++
++static void om_3d7k_fiq_kick(void)
++{
++      unsigned long flags;
++      u32 tcon;
++      
++      /* we have to take care about FIQ because this modification is
++       * non-atomic, FIQ could come in after the read and before the
++       * writeback and its changes to the register would be lost
++       * (platform INTMSK mod code is taken care of already)
++       */
++      local_save_flags(flags);
++      local_fiq_disable();
++      /* allow FIQs to resume   */
++      __raw_writel((__raw_readl(S3C64XX_TINT_CSTAT)  & 0x1f)| 1 << 3,
++                                                          S3C64XX_TINT_CSTAT);
++
++      tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START; 
++      /* fake the timer to a count of 1 */
++      __raw_writel(1, S3C2410_TCNTB(om_3d7k_fiq_timer_index));
++      __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
++      __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
++                   S3C2410_TCON);
++      __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
++      local_irq_restore(flags);
++}
++
++static int om_3d7k_fiq_enable(void)
++{
++      int irq_index_fiq = IRQ_TIMER3_VIC;
++      int rc = 0;
++
++      local_fiq_disable();
++
++      om_3d7k_fiq_irq = irq_index_fiq;
++      om_3d7k_fiq_ack_mask = 1 << 3;
++      om_3d7k_fiq_mod_mask = 1 << 27;
++      om_3d7k_fiq_timer_index = 3;
++
++      /* set up the timer to operate as a pwm device */
++
++      rc = s3c2410_pwm_init(&om_3d7k_fiq_pwm_timer);
++      if (rc)
++              goto bail;
++
++      om_3d7k_fiq_pwm_timer.timerid = PWM0 + om_3d7k_fiq_timer_index;
++      om_3d7k_fiq_pwm_timer.prescaler = ((6 - 1) / 2);
++      om_3d7k_fiq_pwm_timer.divider = S3C64XX_TCFG1_MUX_DIV2 << S3C2410_TCFG1_SHIFT(3);
++      /* default rate == ~32us */
++      om_3d7k_fiq_pwm_timer.counter = om_3d7k_fiq_pwm_timer.comparer = 3000;
++
++      rc = s3c2410_pwm_enable(&om_3d7k_fiq_pwm_timer);
++      if (rc)
++              goto bail;
++
++      /* let our selected interrupt be a magic FIQ interrupt */
++      __raw_writel(om_3d7k_fiq_mod_mask, S3C6410_INTMSK + 4);
++      __raw_writel(om_3d7k_fiq_mod_mask, S3C6410_INTMOD);
++      __raw_writel(om_3d7k_fiq_mod_mask, S3C6410_INTMSK);
++
++      __raw_writel(SP890_TZIC_UNLOCK_MAGIC, S3C64XX_VA_TZIC0_LOCK);
++      __raw_writel(om_3d7k_fiq_mod_mask, S3C64XX_VA_TZIC0_FIQENABLE);
++      __raw_writel(om_3d7k_fiq_mod_mask, S3C64XX_VA_TZIC0_INTSELECT);
++
++      s3c2410_pwm_start(&om_3d7k_fiq_pwm_timer);
++
++      /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
++      local_fiq_enable();
++
++      set_fiq_c_handler(om_3d7k_fiq_handler);
++
++      if (rc < 0)
++              goto bail;
++
++      return 0;
++bail:
++      printk(KERN_ERR "Count not initialize FIQ for OM_3D7K %d \n", rc);
++      return rc;
++}
++
++static void om_3d7k_fiq_disable(void)
++{
++      __raw_writel(0, S3C6410_INTMOD);
++      local_fiq_disable();
++      om_3d7k_fiq_irq = 0; /* no active source interrupt now either */
++
++}
++/* -------------------- /OM_3D7K FIQ Handler ------------------------------------- */
++
++#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg om_3d7k_uartcfgs[] __initdata = {
++      [0] = {
++              .hwport      = 0,
++              .flags       = 0,
++              .ucon        = 0x3c5,
++              .ulcon       = 0x03,
++              .ufcon       = 0x51,
++      },
++      [1] = {
++              .hwport      = 1,
++              .flags       = 0,
++              .ucon        = 0x3c5,
++              .ulcon       = 0x03,
++              .ufcon       = 0x51,
++      },
++      [2] = {
++              .hwport      = 2,
++              .flags       = 0,
++              .ucon        = 0x3c5,
++              .ulcon       = 0x03,
++              .ufcon       = 0x51,
++      },
++      [3] = {
++              .hwport      = 3,
++              .flags       = 0,
++              .ucon        = 0x3c5,
++              .ulcon       = 0x03,
++              .ufcon       = 0x51,
++      },
++};
++
++
++/*
++ * Situation is that Linux SPI can't work in an interrupt context, so we
++ * implement our own bitbang here.  Arbitration is needed because not only
++ * can this interrupt happen at any time even if foreground wants to use
++ * the bitbang API from Linux, but multiple motion sensors can be on the
++ * same SPI bus, and multiple interrupts can happen.
++ *
++ * Foreground / interrupt arbitration is okay because the interrupts are
++ * disabled around all the foreground SPI code.
++ *
++ * Interrupt / Interrupt arbitration is evidently needed, otherwise we
++ * lose edge-triggered service after a while due to the two sensors sharing
++ * the SPI bus having irqs at the same time eventually.
++ *
++ * Servicing is typ 75 - 100us at 400MHz.
++ */
++
++/* #define DEBUG_SPEW_MS */
++#define MG_PER_SAMPLE 18
++
++struct lis302dl_platform_data lis302_pdata;
++
++/*
++ * generic SPI RX and TX bitbang
++ * only call with interrupts off!
++ */
++
++static void __3d7k_lis302dl_bitbang(struct lis302dl_info *lis, u8 *tx,
++                                           int tx_bytes, u8 *rx, int rx_bytes)
++{
++      struct lis302dl_platform_data *pdata = lis->pdata;
++      int n;
++      u8 shifter = 0;
++
++      gpio_direction_output(pdata->pin_chip_select, 1);
++      gpio_direction_output(pdata->pin_clk, 1);
++      gpio_direction_output(pdata->pin_chip_select, 0);
++
++      /* send the register index, r/w and autoinc bits */
++      for (n = 0; n < (tx_bytes << 3); n++) {
++              if (!(n & 7))
++                      shifter = ~tx[n >> 3];
++              gpio_direction_output(pdata->pin_clk, 0);
++              gpio_direction_output(pdata->pin_mosi, !(shifter & 0x80));
++              gpio_direction_output(pdata->pin_clk, 1);
++              shifter <<= 1;
++      }
++
++      for (n = 0; n < (rx_bytes << 3); n++) { /* 8 bits each */
++              gpio_direction_output(pdata->pin_clk, 0);
++              shifter <<= 1;
++              if (gpio_direction_input(pdata->pin_miso))
++                      shifter |= 1;
++              if ((n & 7) == 7)
++                      rx[n >> 3] = shifter;
++              gpio_direction_output(pdata->pin_clk, 1);
++      }
++      gpio_direction_output(pdata->pin_chip_select, 1);
++}
++
++
++static int om_3d7k_lis302dl_bitbang_read_reg(struct lis302dl_info *lis, u8 reg)
++{
++      u8 data = 0xc0 | reg; /* read, autoincrement */
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      __3d7k_lis302dl_bitbang(lis, &data, 1, &data, 1);
++
++      local_irq_restore(flags);
++
++      return data;
++}
++
++static void om_3d7k_lis302dl_bitbang_write_reg(struct lis302dl_info *lis, u8 reg,
++                                                                       u8 val)
++{
++      u8 data[2] = { 0x00 | reg, val }; /* write, no autoincrement */
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      __3d7k_lis302dl_bitbang(lis, &data[0], 2, NULL, 0);
++
++      local_irq_restore(flags);
++
++}
++
++
++void om_3d7k_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
++{
++      struct lis302dl_platform_data *pdata = lis->pdata;
++
++      if (!resume) {
++               /*
++               * we don't want to power them with a high level
++               * because GSENSOR_3V3 is not up during suspend
++               */
++              gpio_direction_output(pdata->pin_chip_select, 0);
++              gpio_direction_output(pdata->pin_clk, 0);
++              gpio_direction_output(pdata->pin_mosi, 0);
++              s3c_gpio_setpull(pdata->pin_miso, S3C_GPIO_PULL_DOWN);
++
++              return;
++      }
++
++      /* back to normal */
++      gpio_direction_output(pdata->pin_chip_select, 1);
++      gpio_direction_output(pdata->pin_clk, 1);
++      s3c_gpio_setpull(pdata->pin_miso, S3C_GPIO_PULL_NONE);
++
++      s3c_gpio_cfgpin(pdata->pin_chip_select, S3C_GPIO_SFN(1));
++      s3c_gpio_cfgpin(pdata->pin_clk, S3C_GPIO_SFN(1));
++      s3c_gpio_cfgpin(pdata->pin_mosi, S3C_GPIO_SFN(1));
++      s3c_gpio_cfgpin(pdata->pin_miso, S3C_GPIO_SFN(0));
++
++}
++#if 0
++struct lis302dl_platform_data lis302_pdata = {
++              .name           = "lis302",
++              .pin_chip_select= S3C64XX_GPC(3), /* NC */
++              .pin_clk        = OM_3D7K_GPIO_ACCEL_CLK,
++              .pin_mosi       = OM_3D7K_GPIO_ACCEL_MOSI,
++              .pin_miso       = OM_3D7K_GPIO_ACCEL_MISO,
++              .interrupt      = OM_3D7K_IRQ_GSENSOR_1,
++              .open_drain     = 0,
++              .lis302dl_bitbang = __3d7k_lis302dl_bitbang,
++              .lis302dl_bitbang_reg_read = om_3d7k_lis302dl_bitbang_read_reg,
++              .lis302dl_bitbang_reg_write = om_3d7k_lis302dl_bitbang_write_reg,
++              .lis302dl_suspend_io = om_3d7k_lis302dl_suspend_io,
++};
++
++static struct platform_device s3c_device_spi_acc1 = {
++      .name             = "lis302dl",
++      .id               = 1,
++      .dev = {
++              .platform_data = &lis302_pdata,
++      },
++};
++
++#endif
++
++/* framebuffer and LCD setup. */
++
++/* GPF15 = LCD backlight control
++ * GPF13 => Panel power
++ * GPN5 = LCD nRESET signal
++ * PWM_TOUT1 => backlight brightness
++ */
++
++static void om_3d7k_lcd_power_set(struct plat_lcd_data *pd,
++                                 unsigned int power)
++{
++
++}
++
++static struct plat_lcd_data om_3d7k_lcd_power_data = {
++      .set_power      = om_3d7k_lcd_power_set,
++};
++
++static struct platform_device om_3d7k_lcd_powerdev = {
++      .name                   = "platform-lcd",
++      .dev.parent             = &s3c_device_fb.dev,
++      .dev.platform_data      = &om_3d7k_lcd_power_data,
++};
++
++static struct s3c_fb_pd_win om_3d7k_fb_win0 = {
++      /* this is to ensure we use win0 */
++      .win_mode       = {
++              .pixclock       = 40816,
++              .left_margin    = 8,
++              .right_margin   = 16,
++              .upper_margin   = 2,
++              .lower_margin   = 16,
++              .hsync_len      = 8,
++              .vsync_len      = 2,
++              .xres           = 480,
++              .yres           = 640,
++      },
++      .max_bpp        = 32,
++      .default_bpp    = 16,
++};
++
++static void om_3d7k_fb_gpio_setup(void)
++{
++      unsigned int gpio;
++
++      /* GPI0, GPI1, GPI8 are for hardware version contrl.
++       * They should be set as input in order to prevent
++       * current leaking
++       */
++      for (gpio = S3C64XX_GPI(2); gpio <= S3C64XX_GPI(15); gpio++) {
++              if (gpio != S3C64XX_GPI(8)) {
++                      s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
++                      s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
++              }
++      }
++
++      for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
++              s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
++              s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
++      }
++}
++
++static struct s3c_fb_platdata om_3d7k_lcd_pdata __initdata = {
++      .setup_gpio     = om_3d7k_fb_gpio_setup,
++      .win[0]         = &om_3d7k_fb_win0,
++      .vidcon0        = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
++      .vidcon1        = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
++};
++
++
++struct map_desc om_3d7k_6410_iodesc[] = {};
++
++static struct resource om_3d7k_button_resources[] = {
++      [0] = {
++              .start = 0,
++              .end   = 0,
++      },
++      [1] = {
++              .start = OM_3D7K_GPIO_HOLD,
++              .end   = OM_3D7K_GPIO_HOLD,
++      },
++      [2] = {
++              .start = OM_3D7K_GPIO_JACK_INSERT,
++              .end   = OM_3D7K_GPIO_JACK_INSERT,
++      },
++      [3] = {
++              .start = OM_3D7K_GPIO_KEY_PLUS,
++              .end   = OM_3D7K_GPIO_KEY_PLUS,
++      },
++      [4] = {
++              .start = OM_3D7K_GPIO_KEY_MINUS,
++              .end   = OM_3D7K_GPIO_KEY_MINUS,
++      },
++};
++
++static struct platform_device om_3d7k_button_dev = {
++      .name           = "neo1973-button",
++      .num_resources  = ARRAY_SIZE(om_3d7k_button_resources),
++      .resource       = om_3d7k_button_resources,
++};
++
++
++/********************** PMU ***************************/
++/*
++ * OM_3D7K PMU Mapping info
++ *
++ *  name  maxcurr  default    Nom   consumers
++ *
++ *  AUTO   1100mA  ON  3.3V   3.3V  Main 3.3V rail
++ *  DOWN1   500mA  ON  1.2V   1.2V  CPU VddARM, VddINT, VddMPLL, VddOTGI
++ *  DOWN2   500mA  ON  1.8V   1.8V  CPU VddAlive via LDO, Memories, WLAN
++ *  LED      25mA  OFF        18V   Backlight
++ *  HCLDO   200mA  OFF        2.8V  Camera 2V8
++ *  LDO1     50mA  ON  3.3V   3.3V  Accel
++ *  LDO2     50mA  OFF        1.5V  Camera 1V5
++ *  LDO3     50mA  OFF        3.3V  CODEC 3.3V
++ *  LDO4    150mA  ON  2.8V   2.7V  uSD power
++ *  LDO5    150mA  OFF        3.0V  GPS 3V
++ *  LDO6     50mA  ON  3.0V   3.0V  LCM 3V
++ *
++ */
++
++
++/* PMU driver info */
++
++
++static struct regulator_consumer_supply ldo4_consumers[] = {
++      {
++              .dev = &s3c_device_hsmmc0.dev,
++              .supply = "SD_3V",
++      },
++};
++
++static struct platform_device om_3d7k_features_dev = {
++      .name           = "om-3d7k",
++};
++
++static struct regulator_consumer_supply ldo5_consumers[] = {
++      {
++              .dev = &om_3d7k_features_dev.dev,
++              .supply = "RF_3V",
++      },
++};
++
++
++static void om_3d7k_pmu_event_callback(struct pcf50633 *pcf, int irq)
++{
++#if 0
++      if (irq == PCF50633_IRQ_USBINS) {
++              schedule_delayed_work(&om_3d7k_charger_work,
++                              GTA02_CHARGER_CONFIGURE_TIMEOUT);
++              return;
++      } else if (irq == PCF50633_IRQ_USBREM) {
++              cancel_delayed_work_sync(&om_3d7k_charger_work);
++              pcf50633_mbc_usb_curlim_set(pcf, 0);
++              om_3d7k_usb_vbus_draw = 0;
++      }
++
++      bq27000_charging_state_change(&bq27000_battery_device);
++#endif
++}
++
++static void om_3d7k_pcf50633_attach_child_devices(struct pcf50633 *pcf);
++static void om_3d7k_pmu_regulator_registered(struct pcf50633 *pcf, int id);
++
++/* Global reference */
++struct pcf50633 *om_3d7k_pcf;
++
++struct pcf50633_platform_data om_3d7k_pcf_pdata = {
++
++      .resumers = {
++              [0] = PCF50633_INT1_USBINS |
++                    PCF50633_INT1_USBREM |
++                    PCF50633_INT1_ALARM,
++              [1] = PCF50633_INT2_ONKEYF,
++              [2] = PCF50633_INT3_ONKEY1S
++      },
++      .chg_ref_current_ma = 1000,
++      .reg_init_data = {
++              /* OM_3D7K: Main 3.3V rail */
++              [PCF50633_REGULATOR_AUTO] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: CPU core power */
++              [PCF50633_REGULATOR_DOWN1] = {
++                      .constraints = {
++                              .min_uV = 900000,
++                              .max_uV = 1200000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: Memories */
++              [PCF50633_REGULATOR_DOWN2] = {
++                      .constraints = {
++                              .min_uV = 1800000,
++                              .max_uV = 1800000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: Camera 2V8 */
++              [PCF50633_REGULATOR_HCLDO] = {
++                      .constraints = {
++                              .min_uV = 2800000,
++                              .max_uV = 2800000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                      },
++                      .num_consumer_supplies = 0,
++/*                    .consumer_supplies = hcldo_consumers, */
++              },
++
++              /* OM_3D7K: Accel 3V3 */
++              [PCF50633_REGULATOR_LDO1] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: Camera 1V5 */
++              [PCF50633_REGULATOR_LDO2] = {
++                      .constraints = {
++                              .min_uV = 1500000,
++                              .max_uV = 1500000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: Codec 3.3V */
++              [PCF50633_REGULATOR_LDO3] = {
++                      .constraints = {
++                              .min_uV = 3300000,
++                              .max_uV = 3300000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                              .always_on = 1,
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* OM_3D7K: uSD Power */
++              [PCF50633_REGULATOR_LDO4] = {
++                      .constraints = {
++                              .min_uV = 3000000,
++                              .max_uV = 3000000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 1,
++                      .consumer_supplies = ldo4_consumers,
++              },
++              /* OM_3D7K: GPS 3V */
++              [PCF50633_REGULATOR_LDO5] = {
++                      .constraints = {
++                              .min_uV = 3000000,
++                              .max_uV = 3000000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .apply_uV = 1,
++                      },
++                      .num_consumer_supplies = 1,
++                      .consumer_supplies = ldo5_consumers,
++              },
++              /* OM_3D7K: LCM 3V */
++              [PCF50633_REGULATOR_LDO6] = {
++                      .constraints = {
++                              .min_uV = 3000000,
++                              .max_uV = 3000000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++              /* power for memories in suspend */
++              [PCF50633_REGULATOR_MEMLDO] = {
++                      .constraints = {
++                              .min_uV = 1800000,
++                              .max_uV = 1800000,
++                              .valid_modes_mask = REGULATOR_MODE_NORMAL,
++                              .state_mem = {
++                                      .enabled = 1,
++                              },
++                      },
++                      .num_consumer_supplies = 0,
++              },
++
++      },
++      .probe_done = om_3d7k_pcf50633_attach_child_devices,
++      .regulator_registered = om_3d7k_pmu_regulator_registered,
++      .mbc_event_callback = om_3d7k_pmu_event_callback,
++};
++
++static void om_3d7k_bl_set_intensity(int intensity)
++{
++      struct pcf50633 *pcf = om_3d7k_pcf;
++      int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
++      int ret;
++
++      intensity >>= 2;
++
++      /*
++       * One code path that leads here is from a kernel panic. Trying to turn
++       * the backlight on just gives us a nearly endless stream of complaints
++       * and accomplishes nothing. We can't win. Just give up.
++       *
++       * In the unlikely event that there's another path leading here while
++       * we're atomic, we print at least a warning.
++       */
++      if (in_atomic()) {
++              printk(KERN_ERR
++                  "3d7k_bl_set_intensity called while atomic\n");
++              return;
++      }
++
++      old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
++      if (intensity == old_intensity)
++              return;
++
++      /* We can't do this anywhere else */
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
++
++      if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
++              old_intensity = 0;
++
++      /*
++       * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
++       * if seen, you have to re-enable the LED unit
++       */
++      if (!intensity || !old_intensity)
++              pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
++
++      if (!intensity) /* illegal to set LEDOUT to 0 */
++              ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
++                                                                           2);
++      else
++              ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
++                             intensity);
++
++      if (intensity)
++              pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
++
++}
++
++static struct generic_bl_info om_3d7k_bl_info = {
++      .name                   = "om-3d7k-bl",
++      .max_intensity          = 0xff,
++      .default_intensity      = 0x7f,
++      .set_bl_intensity       = om_3d7k_bl_set_intensity,
++};
++
++static struct platform_device om_3d7k_bl_dev = {
++      .name  = "generic-bl",
++      .id  = 1,
++      .dev = {
++              .platform_data = &om_3d7k_bl_info,
++      },
++};
++
++/* BQ27000 Battery */
++static int om_3d7k_get_charger_online_status(void)
++{
++      struct pcf50633 *pcf = om_3d7k_pcf;
++
++      return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
++}
++
++static int om_3d7k_get_charger_active_status(void)
++{
++      struct pcf50633 *pcf = om_3d7k_pcf;
++
++      return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
++}
++
++
++struct bq27000_platform_data bq27000_pdata = {
++      .name = "battery",
++      .rsense_mohms = 20,
++      .hdq_read = hdq_read,
++      .hdq_write = hdq_write,
++      .hdq_initialized = hdq_initialized,
++      .get_charger_online_status = om_3d7k_get_charger_online_status,
++      .get_charger_active_status = om_3d7k_get_charger_active_status
++};
++
++struct platform_device bq27000_battery_device = {
++      .name           = "bq27000-battery",
++      .dev = {
++              .platform_data = &bq27000_pdata,
++      },
++};
++
++#ifdef CONFIG_HDQ_GPIO_BITBANG
++/* HDQ */
++
++static void om_3d7k_hdq_attach_child_devices(struct device *parent_device)
++{
++              bq27000_battery_device.dev.parent = parent_device;
++              platform_device_register(&bq27000_battery_device);
++}
++
++static void om_3d7k_hdq_gpio_direction_out(void)
++{
++      unsigned long con;
++      void __iomem *regcon = S3C64XX_GPH_BASE; 
++
++      con = __raw_readl(regcon);
++      con &= ~(0xf << 28);
++      con |= 0x01 << 28;
++      __raw_writel(con, regcon);
++
++      /* Set pull-up enabled */
++      con = __raw_readl(regcon + 0x0c);
++      con |= 3 << 14;
++      __raw_writel(con, regcon + 0x0c);
++}
++
++static void om_3d7k_hdq_gpio_direction_in(void)
++{
++      unsigned long con;
++      void __iomem *regcon = S3C64XX_GPH_BASE;
++
++      con = __raw_readl(regcon);
++      con &= ~(0xf << 28);
++      __raw_writel(con, regcon);
++}
++
++static void om_3d7k_hdq_gpio_set_value(int val)
++{
++      u32 dat;
++      void __iomem *base = S3C64XX_GPH_BASE;
++
++      dat = __raw_readl(base + 0x08);
++      if (val)
++              dat |= 1 << 7;
++      else
++              dat &= ~(1 << 7);
++
++      __raw_writel(dat, base + 0x08);
++}
++
++static int om_3d7k_hdq_gpio_get_value(void)
++{
++      u32 dat;
++      void *base = S3C64XX_GPH_BASE;
++      
++      dat = __raw_readl(base + 0x08);
++
++      return dat & (1 << 7);
++}
++
++static struct resource om_3d7k_hdq_resources[] = {
++      [0] = {
++              .start  = S3C64XX_GPH(7),
++              .end    = S3C64XX_GPH(7),
++      },
++};
++
++struct hdq_platform_data om_3d7k_hdq_platform_data = {
++      .attach_child_devices = om_3d7k_hdq_attach_child_devices,
++      .gpio_dir_out = om_3d7k_hdq_gpio_direction_out,
++      .gpio_dir_in = om_3d7k_hdq_gpio_direction_in,
++      .gpio_set = om_3d7k_hdq_gpio_set_value,
++      .gpio_get = om_3d7k_hdq_gpio_get_value,
++
++      .enable_fiq = om_3d7k_fiq_enable,
++      .disable_fiq = om_3d7k_fiq_disable,
++      .kick_fiq = om_3d7k_fiq_kick,
++
++};
++
++struct platform_device om_3d7k_hdq_device = {
++      .name           = "hdq",
++      .num_resources  = 1,
++      .resource       = om_3d7k_hdq_resources,
++      .dev            = {
++              .platform_data = &om_3d7k_hdq_platform_data,
++      },
++};
++#endif
++
++static void om_3d7k_lp5521_chip_enable(int level)
++{
++      gpio_direction_output(OM_3D7K_GPIO_LED_EN, level);
++      udelay(500);
++}
++
++static struct lp5521_platform_data om_3d7k_lp5521_pdata = {
++       .channels = {
++              [LP5521_BLUE] = LP5521_CONNECTED,
++              [LP5521_GREEN] = LP5521_CONNECTED,
++              [LP5521_RED] = LP5521_NC,
++      },
++      .ext_enable = om_3d7k_lp5521_chip_enable,
++};
++
++static void om_3d7k_pcap7200_reset(void)
++{
++      gpio_direction_output(OM_3D7K_GPIO_TP_RESET, 1);
++      udelay(10);
++      gpio_direction_output(OM_3D7K_GPIO_TP_RESET, 0);
++}
++
++static struct pcap7200_platform_data om_3d7k_pcap7200_pdata = {
++      .mode = MULTI_TOUCH,
++      .reset = om_3d7k_pcap7200_reset,
++};
++
++static struct i2c_board_info om_3d7k_i2c_devs[] __initdata = {
++      {
++              I2C_BOARD_INFO("pcf50633", 0x73),
++              .irq = OM_3D7K_IRQ_PMU,
++              .platform_data = &om_3d7k_pcf_pdata,
++      },
++      {
++              I2C_BOARD_INFO("pcap7200", 0x0a),
++              .irq = OM_3D7K_IRQ_TOUCH,
++              .platform_data = &om_3d7k_pcap7200_pdata,
++      },
++      {
++              I2C_BOARD_INFO("lp5521", 0x32),
++              /* mark this temporarily, since LED INT is connected
++               * to EXT group6_9, the handling of EXT group1~group9
++               * is not implemented. Besides, we don't need this IRQ
++               * now
++               */
++#if 0
++              .irq = OM_3D7K_IRQ_LED,
++#endif
++              .platform_data = &om_3d7k_lp5521_pdata,
++      },
++      {
++              I2C_BOARD_INFO("wm8753", 0x1a),
++      },
++};
++
++struct platform_device s3c24xx_pwm_device = {
++      .name           = "s3c24xx_pwm",
++      .num_resources  = 0,
++};
++
++struct platform_device om_3d7k_device_spi_lcm;
++
++static struct platform_device *om_3d7k_devices[] __initdata = {
++      &s3c_device_fb,
++      &s3c_device_i2c0,
++      &om_3d7k_device_spi_lcm,
++      &s3c_device_usbgadget,
++      &s3c24xx_pwm_device,
++#ifdef CONFIG_S3C_DEV_CAMIF
++      &s3c_device_camif,
++#endif
++};
++
++
++static void om_3d7k_pmu_regulator_registered(struct pcf50633 *pcf, int id)
++{
++      struct platform_device *regulator, *pdev;
++
++      regulator = pcf->regulator_pdev[id];
++
++      switch(id) {
++              case PCF50633_REGULATOR_LDO4:
++                      pdev = &s3c_device_hsmmc0; /* uSD card */
++                      break;
++              case PCF50633_REGULATOR_LDO5: /* GPS regulator */
++                      pdev = &om_3d7k_features_dev;
++                      break;
++              case PCF50633_REGULATOR_LDO6:
++                      pdev = &om_3d7k_lcd_powerdev;
++                      break;
++              default:
++                      return;
++      }
++
++      pdev->dev.parent = &regulator->dev;
++      platform_device_register(pdev);
++}
++
++static struct platform_device *om_3d7k_devices_pmu_children[] = {
++      &om_3d7k_button_dev,
++//    &s3c_device_spi_acc1, /* relies on PMU reg for power */
++      &s3c_device_usb,
++};
++
++/* this is called when pc50633 is probed, unfortunately quite late in the
++ * day since it is an I2C bus device.  Here we can belatedly define some
++ * platform devices with the advantage that we can mark the pcf50633 as the
++ * parent.  This makes them get suspended and resumed with their parent
++ * the pcf50633 still around.
++ */
++
++static void om_3d7k_pcf50633_attach_child_devices(struct pcf50633 *pcf)
++{
++      int n;
++
++      om_3d7k_pcf = pcf;
++
++      for (n = 0; n < ARRAY_SIZE(om_3d7k_devices_pmu_children); n++)
++              om_3d7k_devices_pmu_children[n]->dev.parent = pcf->dev;
++
++      platform_add_devices(om_3d7k_devices_pmu_children,
++                                   ARRAY_SIZE(om_3d7k_devices_pmu_children));
++
++      /* backlight device should be registered until pcf50633 probe is done */
++      om_3d7k_bl_dev.dev.parent = &om_3d7k_device_spi_lcm.dev;
++      platform_device_register(&om_3d7k_bl_dev);
++
++      /* Switch on backlight. Qi does not do it for us */
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
++      pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
++}
++
++static void om_3d7k_l1k002_pwronoff(int level)
++{
++      gpio_direction_output(OM_3D7K_GPIO_LCM_SD, 1);
++      udelay(15);
++
++      gpio_direction_output(OM_3D7K_GPIO_LCM_RESET, !!level);
++
++      if (level){
++              udelay(15);
++              gpio_direction_output(OM_3D7K_GPIO_LCM_SD, 0);
++      }
++}
++
++const struct l1k002_platform_data om_3d7k_l1k002_pdata = {
++      .pwr_onoff = om_3d7k_l1k002_pwronoff,
++};
++
++static struct spi_board_info om_3d7k_spi_board_info[] = {
++      {
++      .modalias       = "l1k002",
++      .platform_data  = &om_3d7k_l1k002_pdata,
++      /* controller_data */
++      /* irq */
++      .max_speed_hz   = 10 * 1000 * 1000,
++      .bus_num        = 1,
++      /* chip_select */
++      },
++};
++
++static void om_3d7k_jbt6k74_probe_completed(struct device *dev)
++{
++      dev_info(dev, "device attached\n");
++}
++
++const struct jbt6k74_platform_data jbt6k74_pdata = {
++      .probe_completed = om_3d7k_jbt6k74_probe_completed,
++};
++
++static struct spi_board_info alt_om_3d7k_spi_board_info[] = {
++      {
++      .modalias       = "jbt6k74",
++      .platform_data  = &jbt6k74_pdata,
++      /* controller_data */
++      /* irq */
++      .max_speed_hz   = 100 * 1000,
++      .bus_num        = 1,
++      /* chip_select */
++      },
++};
++
++static void spi_gpio_cs(struct s3c64xx_spigpio_info *spi, int csidx, int cs)
++{
++      switch (cs) {
++      case BITBANG_CS_ACTIVE:
++              gpio_direction_output(OM_3D7K_GPIO_LCM_CS, 0);
++              break;
++      case BITBANG_CS_INACTIVE:
++              gpio_direction_output(OM_3D7K_GPIO_LCM_CS, 1);
++              break;
++      }
++}
++
++static struct s3c64xx_spigpio_info spi_gpio_cfg = {
++      .pin_clk        = OM_3D7K_GPIO_LCM_CLK,
++      .pin_mosi       = OM_3D7K_GPIO_LCM_MOSI,
++      /* no pinout to MISO */
++      .chip_select    = &spi_gpio_cs,
++      .num_chipselect = 1,
++      .bus_num        = 1,
++};
++
++struct platform_device om_3d7k_device_spi_lcm = {
++      .name             = "spi_s3c64xx_gpio",
++      .id               = 1,
++      .dev = {
++              .platform_data = &spi_gpio_cfg,
++      },
++};
++
++static int attached_lcm;
++
++static int __init om3d7k_lcm_probe(char *s)
++{
++      if (!strcmp(s, "jbt6k74"))
++              attached_lcm = 1;
++
++      return 1;
++}
++__setup("om_3d7k_lcm=", om3d7k_lcm_probe);
++
++extern void s3c64xx_init_io(struct map_desc *, int);
++
++struct s3c_plat_otg_data s3c_hs_otg_plat_data = {
++      .phyclk = 0
++};
++
++/* USB */
++static struct s3c2410_hcd_info om3d7k_usb_info = {
++      .port[0]        = {
++              .flags  = S3C_HCDFLG_USED,
++      },
++      .port[1]        = {
++              .flags  = 0,
++      },
++};
++
++static void __init om_3d7k_map_io(void)
++{
++      s3c64xx_init_io(om_3d7k_6410_iodesc, ARRAY_SIZE(om_3d7k_6410_iodesc));
++      s3c24xx_init_clocks(12000000);
++      s3c24xx_init_uarts(om_3d7k_uartcfgs, ARRAY_SIZE(om_3d7k_uartcfgs));
++}
++
++static void __init om_3d7k_machine_init(void)
++{
++      s3c_pm_init();
++
++      s3c_device_usb.dev.platform_data = &om3d7k_usb_info;
++      s3c_device_usbgadget.dev.platform_data = &s3c_hs_otg_plat_data;
++
++      s3c_i2c0_set_platdata(NULL);
++      s3c_fb_set_platdata(&om_3d7k_lcd_pdata);
++
++      i2c_register_board_info(0, om_3d7k_i2c_devs,
++                                               ARRAY_SIZE(om_3d7k_i2c_devs));
++      if (attached_lcm)
++              spi_register_board_info(alt_om_3d7k_spi_board_info,
++                                      ARRAY_SIZE(alt_om_3d7k_spi_board_info));
++      else
++              spi_register_board_info(om_3d7k_spi_board_info,
++                                              ARRAY_SIZE(om_3d7k_spi_board_info));
++
++      platform_add_devices(om_3d7k_devices, ARRAY_SIZE(om_3d7k_devices));
++
++      /* Register the HDQ and vibrator as children of pwm device */
++      om_3d7k_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
++      platform_device_register(&om_3d7k_hdq_device);
++}
++
++MACHINE_START(OM_3D7K, "OM-3D7K")
++      /* Maintainer: Andy Green <andy@openmoko.com> */
++      .phys_io        = S3C_PA_UART & 0xfff00000,
++      .io_pg_offst    = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
++      .boot_params    = S3C64XX_PA_SDRAM + 0x100,
++
++      .init_irq       = s3c6410_init_irq,
++      .map_io         = om_3d7k_map_io,
++      .init_machine   = om_3d7k_machine_init,
++      .timer          = &s3c24xx_timer,
++MACHINE_END
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/mach-smdk6410.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/mach-smdk6410.c        2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/mach-smdk6410.c     2009-05-10 22:27:59.000000000 +0200
+@@ -39,14 +39,20 @@
+ #include <asm/mach-types.h>
+ #include <plat/regs-serial.h>
++#include <plat/regs-modem.h>
++#include <plat/regs-gpio.h>
++#include <plat/regs-sys.h>
+ #include <plat/iic.h>
+ #include <plat/fb.h>
++#include <plat/pm.h>
+ #include <plat/s3c6410.h>
+ #include <plat/clock.h>
+ #include <plat/devs.h>
+ #include <plat/cpu.h>
++#include <plat/regs-usb-hs-otg.h>
++
+ #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+ #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+ #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+@@ -141,7 +147,10 @@
+       &s3c_device_i2c0,
+       &s3c_device_i2c1,
+       &s3c_device_fb,
++      &s3c_device_usb,
+       &smdk6410_lcd_powerdev,
++      &s3c_device_usbgadget,
++
+ };
+ static struct i2c_board_info i2c_devs0[] __initdata = {
+@@ -155,13 +164,36 @@
+ static void __init smdk6410_map_io(void)
+ {
++      u32 tmp;
++
+       s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+       s3c24xx_init_clocks(12000000);
+       s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
++
++      /* set the LCD type */
++
++      tmp = __raw_readl(S3C64XX_SPCON);
++      tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
++      tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
++      __raw_writel(tmp, S3C64XX_SPCON);
++
++      /* remove the lcd bypass */
++      tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
++      tmp &= ~MIFPCON_LCD_BYPASS;
++      __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+ }
++struct s3c_plat_otg_data s3c_hs_otg_plat_data = {
++      .phyclk = REF_CLK_OSCC
++};
++
++
+ static void __init smdk6410_machine_init(void)
+ {
++      s3c_pm_init();
++
++      s3c_device_usbgadget.dev.platform_data = &s3c_hs_otg_plat_data;
++
+       s3c_i2c0_set_platdata(NULL);
+       s3c_i2c1_set_platdata(NULL);
+       s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/Makefile       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -21,3 +21,6 @@
+ # machine support
+ obj-$(CONFIG_MACH_SMDK6410)   += mach-smdk6410.o
++obj-$(CONFIG_MACH_OM_3D7K)    += mach-om-3d7k.o \
++                                 om-3d7k-features.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/om-3d7k-features.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/om-3d7k-features.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/om-3d7k-features.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/om-3d7k-features.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,273 @@
++/*
++ * Support for features of Openmoko 3D7K
++ *
++ * (C) 2008 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * Somewhat based on the GTA01 / 02 neo1973_pm_ stuff mainly by Harald Welte
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <mach/om-3d7k.h>
++#include <asm/mach-types.h>
++
++#include <linux/regulator/consumer.h>
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/mfd/pcf50633/gpio.h>
++#include <linux/mmc/host.h>
++
++#include <plat/sdhci.h>
++#include <plat/devs.h>
++
++#include <plat/gpio-cfg.h>
++
++enum feature {
++      OM_3D7K_GSM,            /* GSM module */
++      OM_3D7K_USBHOST,        /* USB Host power generation */
++      OM_3D7K_VIB,            /* Vibrator */
++
++      OM_3D7K_FEATURE_COUNT   /* always last */
++};
++
++
++struct om_3d7k_feature_info {
++      const char * name;
++      int depower_on_suspend;
++      int on;
++};
++
++static struct om_3d7k_feature_info feature_info[OM_3D7K_FEATURE_COUNT] = {
++      [OM_3D7K_GSM] = { "gsm_power",          0, 0 },
++      [OM_3D7K_USBHOST] =     { "usbhost_power",      1, 0 },
++      [OM_3D7K_VIB] = { "vibrator_power",     1, 0 },
++};
++
++static struct regulator *gps_regulator;
++
++
++
++static void om_3d7k_features_pwron_set_on(enum feature feature)
++{
++      switch (feature) {
++      case OM_3D7K_GSM:
++              /* give power to GSM module */
++              s3c_gpio_setpull(OM_3D7K_GPIO_N_MODEM_RESET, S3C_GPIO_PULL_NONE);
++              s3c_gpio_setpull(OM_3D7K_GPIO_MODEM_ON, S3C_GPIO_PULL_NONE);
++              s3c_gpio_cfgpin(OM_3D7K_GPIO_N_MODEM_RESET, S3C_GPIO_SFN(1));
++              s3c_gpio_cfgpin(OM_3D7K_GPIO_MODEM_ON, S3C_GPIO_SFN(1));
++              gpio_direction_output(OM_3D7K_GPIO_N_MODEM_RESET, 0);
++              gpio_direction_output(OM_3D7K_GPIO_MODEM_ON, 1);
++              msleep(10);
++              gpio_direction_output(OM_3D7K_GPIO_MODEM_ON, 0);
++              msleep(150);
++              gpio_direction_output(OM_3D7K_GPIO_N_MODEM_RESET, 1);
++              msleep(300);
++              gpio_direction_output(OM_3D7K_GPIO_MODEM_ON, 1);
++              break;
++      case OM_3D7K_USBHOST:
++              pcf50633_gpio_set(om_3d7k_pcf, PCF50633_GPO, 1);
++              break;
++      case OM_3D7K_VIB:
++              gpio_direction_output(OM_3D7K_GPIO_VIBRATOR_ON, 1);
++              break;
++      default:
++              break;
++      }
++}
++
++static void om_3d7k_features_pwron_set_off(enum feature feature)
++{
++      switch (feature) {
++      case OM_3D7K_GSM:
++              /* remove power from WLAN / BT module */
++              s3c_gpio_cfgpin(OM_3D7K_GPIO_MODEM_ON, S3C_GPIO_SFN(1));
++              gpio_direction_output(OM_3D7K_GPIO_MODEM_ON, 0);
++              msleep(1100);
++              gpio_direction_output(OM_3D7K_GPIO_MODEM_ON, 1);
++              break;
++      case OM_3D7K_USBHOST:
++              pcf50633_gpio_set(om_3d7k_pcf, PCF50633_GPO, 0);
++              break;
++      case OM_3D7K_VIB:
++              gpio_direction_output(OM_3D7K_GPIO_VIBRATOR_ON, 0);
++              break;
++      default:
++              break;
++      }
++}
++
++static void om_3d7k_features_pwron_set(enum feature feature, int on)
++{
++      if ((on) && (!feature_info[feature].on))
++              om_3d7k_features_pwron_set_on(feature);
++      else
++              if ((!on) && (feature_info[feature].on))
++                      om_3d7k_features_pwron_set_off(feature);
++}
++
++static ssize_t om_3d7k_feature_read(struct device *dev,
++                                     struct device_attribute *attr, char *buf)
++{
++      int on;
++      int feature = 0;
++      int hit = 0;
++
++      while (!hit && feature < OM_3D7K_FEATURE_COUNT) {
++              if (!strcmp(attr->attr.name, feature_info[feature].name))
++                      hit = 1;
++              else
++                      feature++;
++      }
++
++      if (!hit)
++              return -EINVAL;
++
++      switch (feature) {
++      case OM_3D7K_USBHOST:
++              on = pcf50633_gpio_get(om_3d7k_pcf, PCF50633_GPO);
++              break;
++      default:
++              on = feature_info[feature].on;
++      }
++
++      *buf++ = '0' + on;
++      *buf++='\n';
++      *buf = '\0';
++
++      return 3;
++}
++
++static ssize_t om_3d7k_feature_write(struct device *dev,
++                                      struct device_attribute *attr,
++                                      const char *buf, size_t count)
++{
++      int on = !!simple_strtoul(buf, NULL, 10);
++      int feature = 0;
++      int hit = 0;
++
++      while (!hit && feature < OM_3D7K_FEATURE_COUNT) {
++              if (!strcmp(attr->attr.name, feature_info[feature].name))
++                      hit = 1;
++              else
++                      feature++;
++      }
++
++      if (!hit)
++              return -EINVAL;
++
++      om_3d7k_features_pwron_set(feature, on);
++      feature_info[feature].on = on;
++
++      return count;
++}
++
++
++static DEVICE_ATTR(gsm_power, 0644, om_3d7k_feature_read,
++                                                      om_3d7k_feature_write);
++
++static DEVICE_ATTR(usbhost_power, 0644, om_3d7k_feature_read,
++                                                      om_3d7k_feature_write);
++
++static DEVICE_ATTR(vibrator_power, 0644, om_3d7k_feature_read,
++                                                      om_3d7k_feature_write);
++
++
++static struct attribute *om_3d7k_features_sysfs_entries[] = {
++      &dev_attr_gsm_power.attr,
++      &dev_attr_usbhost_power.attr,
++      &dev_attr_vibrator_power.attr,
++      NULL
++};
++
++
++static struct attribute_group om_3d7k_features_attr_group = {
++      .name   = NULL,
++      .attrs  = om_3d7k_features_sysfs_entries,
++};
++
++static int __init om_3d7k_features_probe(struct platform_device *pdev)
++{
++      gps_regulator = regulator_get(&pdev->dev, "RF_3V");
++      dev_info(&pdev->dev, "starting\n");
++
++      return sysfs_create_group(&pdev->dev.kobj,
++                                               &om_3d7k_features_attr_group);
++}
++
++static int om_3d7k_features_remove(struct platform_device *pdev)
++{
++
++      regulator_put(gps_regulator);
++      sysfs_remove_group(&pdev->dev.kobj, &om_3d7k_features_attr_group);
++
++      return 0;
++}
++
++
++#ifdef CONFIG_PM
++static int om_3d7k_features_suspend(struct platform_device *pdev,
++                                   pm_message_t state)
++{
++      int feature;
++
++      for (feature = 0; feature < OM_3D7K_FEATURE_COUNT; feature++)
++              if (feature_info[feature].depower_on_suspend)
++                      om_3d7k_features_pwron_set_off(feature);
++
++      return 0;
++}
++
++static int om_3d7k_features_resume(struct platform_device *pdev)
++{
++      int feature;
++
++      for (feature = 0; feature < OM_3D7K_FEATURE_COUNT; feature++)
++              if (feature_info[feature].depower_on_suspend)
++                      if (feature_info[feature].on)
++                              om_3d7k_features_pwron_set_on(feature);
++
++      return 0;
++}
++#else
++#define om_3d7k_features_suspend      NULL
++#define om_3d7k_features_resume       NULL
++#endif
++
++static struct platform_driver om_3d7k_features_driver = {
++      .probe          = om_3d7k_features_probe,
++      .remove         = om_3d7k_features_remove,
++      .suspend        = om_3d7k_features_suspend,
++      .resume         = om_3d7k_features_resume,
++      .driver         = {
++              .name           = "om-3d7k",
++      },
++};
++
++static int __devinit om_3d7k_features_init(void)
++{
++      return platform_driver_register(&om_3d7k_features_driver);
++}
++
++static void om_3d7k_features_exit(void)
++{
++      platform_driver_unregister(&om_3d7k_features_driver);
++}
++
++module_init(om_3d7k_features_init);
++module_exit(om_3d7k_features_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Openmoko OM_3D7K Feature Driver");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/setup-sdhci.c linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/setup-sdhci.c
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-s3c6410/setup-sdhci.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-s3c6410/setup-sdhci.c       2009-05-10 22:27:59.000000000 +0200
+@@ -48,7 +48,8 @@
+               s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+       }
+-      s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
++      /* FIXME this needs defining in machine as to if we even have CD */
++      s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+       s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ }
+@@ -79,7 +80,7 @@
+       else
+               ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+-      printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
++      printk(KERN_INFO "%s: %p CTRL 2=%08x, 3=%08x\n", __func__, r, ctrl2, ctrl3);
+       writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+       writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+ }
+@@ -94,9 +95,9 @@
+       /* Set all the necessary GPG pins to special-function 0 */
+       for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+               s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+-              s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
++              s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+       }
+-      s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+-      s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
++//    s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
++//    s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/mach-shark/include/mach/io.h linux-2.6.29-rc3.owrt.om/arch/arm/mach-shark/include/mach/io.h
+--- linux-2.6.29-rc3.owrt/arch/arm/mach-shark/include/mach/io.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/mach-shark/include/mach/io.h     2009-05-10 22:27:59.000000000 +0200
+@@ -14,7 +14,7 @@
+ #define PCIO_BASE     0xe0000000
+ #define IO_SPACE_LIMIT        0xffffffff
+-#define __io(a)               ((void __iomem *)(PCIO_BASE + (a)))
++#define __io(a)               __typesafe_io(PCIO_BASE + (a))
+ #define __mem_pci(addr)       (addr)
+ #endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/Makefile    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/Makefile 2009-05-10 22:27:59.000000000 +0200
+@@ -55,7 +55,8 @@
+ arch-$(CONFIG_CPU_32v6K)      :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+ endif
+ arch-$(CONFIG_CPU_32v5)               :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+-arch-$(CONFIG_CPU_32v4T)      :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
++# We can't load armv4t modules, but still need to assemble some armv4t code to be linked in.
++arch-$(CONFIG_CPU_32v4T)      :=-D__LINUX_ARM_ARCH__=4 -march=armv4 -Wa,-march=armv4t
+ arch-$(CONFIG_CPU_32v4)               :=-D__LINUX_ARM_ARCH__=4 -march=armv4
+ arch-$(CONFIG_CPU_32v3)               :=-D__LINUX_ARM_ARCH__=3 -march=armv3
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-camif.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-camif.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-camif.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-camif.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,65 @@
++/* linux/arch/arm/plat-s3c/dev-camif.c
++ *
++ * Copyright 2009 Openmoko, Inc.
++ * Werner Almesberger <werner@openmoko.org>
++ *
++ * based on dev-hsmmc.c which is
++ *
++ * Copyright (c) 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C series device definition for camera interface devices
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/mmc/host.h>
++
++#include <mach/map.h>
++#include <plat/devs.h>
++#include <plat/cpu.h>
++
++
++#define       S3C6400_PA_CAMIF        0x78000000
++#define S3C24XX_SZ_CAMIF      (0x1000)
++
++
++static struct resource s3c_camif_resource[] = {
++      [0] = {
++              .start = S3C6400_PA_CAMIF,
++              .end   = S3C6400_PA_CAMIF + S3C24XX_SZ_CAMIF - 1,
++              .flags = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start = IRQ_CAMIF_C,
++              .end   = IRQ_CAMIF_C,
++              .flags = IORESOURCE_IRQ,
++      },
++      [2] = {
++              .start = IRQ_CAMIF_P,
++              .end   = IRQ_CAMIF_P,
++              .flags = IORESOURCE_IRQ,
++      }
++
++};
++
++static u64 s3c_device_camif_dmamask = 0xffffffffUL;
++
++struct platform_device s3c_device_camif = {
++      .name             = "s3c-camif",
++      .id               = -1,
++      .num_resources    = ARRAY_SIZE(s3c_camif_resource),
++      .resource         = s3c_camif_resource,
++      .dev              = {
++              .dma_mask = &s3c_device_camif_dmamask,
++              .coherent_dma_mask = 0xffffffffUL
++      }
++};
++
++EXPORT_SYMBOL(s3c_device_camif);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-i2c0.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-i2c0.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-i2c0.c 2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-i2c0.c      2009-05-10 22:27:59.000000000 +0200
+@@ -51,8 +51,8 @@
+       .flags          = 0,
+       .slave_addr     = 0x10,
+       .bus_freq       = 100*1000,
+-      .max_freq       = 400*1000,
+-      .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
++      .max_freq       = 100*1000,
++      .sda_delay      = S3C2410_IICLC_SDA_DELAY15 | S3C2410_IICLC_FILTER_ON,
+ };
+ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-usb.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-usb.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dev-usb.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dev-usb.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,50 @@
++/* linux/arch/arm/plat-s3c/dev-usb.c
++ *
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C series device definition for USB host
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++
++#include <mach/irqs.h>
++#include <mach/map.h>
++
++#include <plat/devs.h>
++
++
++static struct resource s3c_usb_resource[] = {
++      [0] = {
++              .start = S3C_PA_USBHOST,
++              .end   = S3C_PA_USBHOST + 0x100 - 1,
++              .flags = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start = IRQ_USBH,
++              .end   = IRQ_USBH,
++              .flags = IORESOURCE_IRQ,
++      }
++};
++
++static u64 s3c_device_usb_dmamask = 0xffffffffUL;
++
++struct platform_device s3c_device_usb = {
++      .name             = "s3c-ohci",
++      .id               = -1,
++      .num_resources    = ARRAY_SIZE(s3c_usb_resource),
++      .resource         = s3c_usb_resource,
++      .dev              = {
++              .dma_mask = &s3c_device_usb_dmamask,
++              .coherent_dma_mask = 0xffffffffUL
++      }
++};
++
++EXPORT_SYMBOL(s3c_device_usb);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/dma.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/dma.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,86 @@
++/* linux/arch/arm/plat-s3c/dma.c
++ *
++ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C DMA core
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++struct s3c2410_dma_buf;
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++#include <plat/dma-plat.h>
++
++/* dma channel state information */
++struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
++struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
++
++/* s3c_dma_lookup_channel
++ *
++ * change the dma channel number given into a real dma channel id
++*/
++
++struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
++{
++      if (channel & DMACH_LOW_LEVEL)
++              return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
++      else
++              return s3c_dma_chan_map[channel];
++}
++
++/* do we need to protect the settings of the fields from
++ * irq?
++*/
++
++int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      if (chan == NULL)
++              return -EINVAL;
++
++      pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
++
++      chan->op_fn = rtn;
++
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_set_opfn);
++
++int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      if (chan == NULL)
++              return -EINVAL;
++
++      pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
++
++      chan->callback_fn = rtn;
++
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
++
++int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      if (chan == NULL)
++              return -EINVAL;
++
++      chan->flags = flags;
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_setflags);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/gpio.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/gpio.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/gpio.c     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/gpio.c  2009-05-10 22:27:59.000000000 +0200
+@@ -16,7 +16,7 @@
+ #include <linux/io.h>
+ #include <linux/gpio.h>
+-#include <plat/gpio-core.h>
++#include <mach/gpio-core.h>
+ #ifdef CONFIG_S3C_GPIO_TRACK
+ struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+@@ -140,6 +140,15 @@
+       if (!gc->get)
+               gc->get = s3c_gpiolib_get;
++#ifdef CONFIG_PM
++      if (chip->pm != NULL) {
++              if (!chip->pm->save || !chip->pm->resume)
++                      printk(KERN_ERR "gpio: %s has missing PM functions\n",
++                             gc->label);
++      } else
++              printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
++#endif
++
+       /* gpiochip_add() prints own failure message on error. */
+       ret = gpiochip_add(gc);
+       if (ret >= 0)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/gpio-config.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/gpio-config.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/gpio-config.c      2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/gpio-config.c   2009-05-10 22:27:59.000000000 +0200
+@@ -13,6 +13,7 @@
+ */
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/gpio.h>
+ #include <linux/io.h>
+@@ -38,6 +39,7 @@
+       return ret;
+ }
++EXPORT_SYMBOL(s3c_gpio_cfgpin);
+ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+ {
+@@ -56,6 +58,7 @@
+       return ret;
+ }
++EXPORT_SYMBOL(s3c_gpio_setpull);
+ #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+ int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/mach/cpu.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/mach/cpu.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/mach/cpu.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/mach/cpu.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,165 @@
++/*
++ * arch/arm/plat-s3c/include/mach/cpu.h
++ *
++ *  S3C cpu type detection
++ *
++ *  Copyright (C) 2008 Samsung Electronics
++ *  Kyungmin Park <kyungmin.park@samsung.com>
++ *
++ * Derived from OMAP cpu.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __ASM_ARCH_S3C_CPU_H
++#define __ASM_ARCH_S3C_CPU_H
++
++extern unsigned int system_rev;
++
++#define S3C_SYSTEM_REV_ATAG (system_rev & 0xffff)
++#define S3C_SYSTEM_REV_CPU (system_rev & 0xffff0000)
++
++/*
++ * cpu_is_s3c24xx():  True for s3c2400, s3c2410, s3c2440 and so on
++ * cpu_is_s3c241x():  True fro s3c2410, s3c2412
++ * cpu_is_s3c244x():  True fro s3c2440, s3c2442, s3c2443
++ * cpu_is_s3c64xx():  True for s3c6400, s3c6410
++ */
++#define GET_S3C_CLASS ((system_rev >> 24) & 0xff)
++
++#define IS_S3C_CLASS(class, id)                                               \
++static inline int is_s3c ##class (void)                                       \
++{                                                                     \
++      return (GET_S3C_CLASS == (id)) ? 1 : 0;                         \
++}
++
++#define GET_S3C_SUBCLASS      ((system_rev >> 20) & 0xfff)
++
++#define IS_S3C_SUBCLASS(subclass, id)                                 \
++static inline int is_s3c ##subclass (void)                            \
++{                                                                     \
++      return (GET_S3C_SUBCLASS == (id)) ? 1 : 0;                      \
++}
++
++IS_S3C_CLASS(24xx, 0x24)
++IS_S3C_CLASS(64xx, 0x64)
++
++IS_S3C_SUBCLASS(241x, 0x241)
++IS_S3C_SUBCLASS(244x, 0x244)
++
++#define cpu_is_s3c24xx()              0
++#define cpu_is_s3c241x()              0
++#define cpu_is_s3c244x()              0
++#define cpu_is_s3c64xx()              0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef  cpu_is_s3c24xx
++# undef  cpu_is_s3c241x
++# undef  cpu_is_s3c244x
++# define cpu_is_s3c24xx()             is_s3c24xx()
++# define cpu_is_s3c241x()             is_s3c241x()
++# define cpu_is_s3c244x()             is_s3c244x()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef  cpu_is_s3c64xx
++# define cpu_is_s3c64xx()             is_s3c64xx()
++#endif
++
++/*
++ * Macros to detect individual cpu types.
++ * cpu_is_s3c2410():  True for s3c2410
++ * cpu_is_s3c2440():  True for s3c2440
++ * cpu_is_s3c6400():  True for s3c6400
++ * cpu_is_s3c6410():  True for s3c6410
++ *
++ * Exception:
++ * Store Revision A to 1
++ * s3c2410a -> s3c2411
++ * s3c2440a -> s3c2441
++ */
++
++#define GET_S3C_TYPE  ((system_rev >> 16) & 0xffff)
++
++#define IS_S3C_TYPE(type, id)                                         \
++static inline int is_s3c ##type (void)                                        \
++{                                                                     \
++      return (GET_S3C_TYPE == (id)) ? 1 : 0;                          \
++}
++
++IS_S3C_TYPE(2400, 0x2400)
++IS_S3C_TYPE(2410, 0x2410)
++IS_S3C_TYPE(2410a, 0x2411)
++IS_S3C_TYPE(2412, 0x2412)
++IS_S3C_TYPE(2440, 0x2440)
++IS_S3C_TYPE(2440a, 0x2441)
++IS_S3C_TYPE(2442, 0x2442)
++IS_S3C_TYPE(2443, 0x2443)
++IS_S3C_TYPE(6400, 0x6400)
++IS_S3C_TYPE(6410, 0x6410)
++
++#define cpu_is_s3c2400()              0
++#define cpu_is_s3c2410()              0
++#define cpu_is_s3c2410a()             0
++#define cpu_is_s3c2412()              0
++#define cpu_is_s3c2440()              0
++#define cpu_is_s3c2440a()             0
++#define cpu_is_s3c2442()              0
++#define cpu_is_s3c2443()              0
++#define cpu_is_s3c6400()              0
++#define cpu_is_s3c6410()              0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef  cpu_is_s3c2400
++# define cpu_is_s3c2400()             is_s3c2400()
++#endif
++
++#if defined(CONFIG_CPU_S3C2410)
++# undef  cpu_is_s3c2410
++# undef  cpu_is_s3c2410a
++# define cpu_is_s3c2410()             is_s3c2410()
++# define cpu_is_s3c2410a()            is_s3c2410a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2412)
++# undef  cpu_is_s3c2412
++# define cpu_is_s3c2412()             is_s3c2412()
++#endif
++
++#if defined(CONFIG_CPU_S3C2440)
++# undef  cpu_is_s3c2440
++# undef  cpu_is_s3c2440a
++# define cpu_is_s3c2440()             is_s3c2440()
++# define cpu_is_s3c2440a()            is_s3c2440a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2442)
++# undef  cpu_is_s3c2442
++# define cpu_is_s3c2442()             is_s3c2442()
++#endif
++
++#if defined(CONFIG_CPU_S3C2443)
++# undef  cpu_is_s3c2443
++# define cpu_is_s3c2443()             is_s3c2443()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef  cpu_is_s3c6400
++# undef  cpu_is_s3c6410
++# define cpu_is_s3c6400()             is_s3c6400()
++# define cpu_is_s3c6410()             is_s3c6410()
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/mach/io.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/mach/io.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/mach/io.h  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/mach/io.h       2009-05-10 22:27:59.000000000 +0200
+@@ -10,6 +10,7 @@
+ #define __ASM_ARM_ARCH_IO_H
+ /* No current ISA/PCI bus support. */
++
+ #define __io(a)               __typesafe_io(a)
+ #define __mem_pci(a)  (a)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/audio.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/audio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/audio.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/audio.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,45 @@
++/* arch/arm/mach-s3c2410/include/mach/audio.h
++ *
++ * Copyright (c) 2004-2005 Simtec Electronics
++ *    http://www.simtec.co.uk/products/SWLINUX/
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C24XX - Audio platfrom_device info
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#ifndef __ASM_ARCH_AUDIO_H
++#define __ASM_ARCH_AUDIO_H __FILE__
++
++/* struct s3c24xx_iis_ops
++ *
++ * called from the s3c24xx audio core to deal with the architecture
++ * or the codec's setup and control.
++ *
++ * the pointer to itself is passed through in case the caller wants to
++ * embed this in an larger structure for easy reference to it's context.
++*/
++
++struct s3c24xx_iis_ops {
++      struct module *owner;
++
++      int     (*startup)(struct s3c24xx_iis_ops *me);
++      void    (*shutdown)(struct s3c24xx_iis_ops *me);
++      int     (*suspend)(struct s3c24xx_iis_ops *me);
++      int     (*resume)(struct s3c24xx_iis_ops *me);
++
++      int     (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
++      int     (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
++      int     (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
++};
++
++struct s3c24xx_platdata_iis {
++      const char              *codec_clk;
++      struct s3c24xx_iis_ops  *ops;
++      int                     (*match_dev)(struct device *dev);
++};
++
++#endif /* __ASM_ARCH_AUDIO_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/clock.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/clock.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/clock.h       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/clock.h    2009-05-10 22:27:59.000000000 +0200
+@@ -50,6 +50,7 @@
+ extern struct clk clk_ext;
+ /* S3C64XX specific clocks */
++extern struct clk clk_h2;
+ extern struct clk clk_27m;
+ extern struct clk clk_48m;
+@@ -80,6 +81,7 @@
+ /* S3C64XX specific functions and clocks */
++extern int s3c64xx_hclk_ctrl(struct clk *clk, int enable);
+ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+ /* Init for pwm clock code */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/cpu.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/cpu.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/cpu.h 2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/cpu.h      2009-05-10 22:27:59.000000000 +0200
+@@ -69,3 +69,6 @@
+ extern struct sysdev_class s3c2440_sysclass;
+ extern struct sysdev_class s3c2442_sysclass;
+ extern struct sysdev_class s3c2443_sysclass;
++extern struct sysdev_class s3c6410_sysclass;
++extern struct sysdev_class s3c64xx_sysclass;
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/devs.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/devs.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/devs.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/devs.h     2009-05-10 22:27:59.000000000 +0200
+@@ -16,6 +16,10 @@
+       unsigned long            nr_resources;
+ };
++struct s3c_plat_otg_data {
++      int             phyclk;
++};
++
+ extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+@@ -45,10 +49,11 @@
+ extern struct platform_device s3c_device_usbgadget;
++extern struct platform_device s3c_device_ts;
++
+ /* s3c2440 specific devices */
+ #ifdef CONFIG_CPU_S3C2440
+ extern struct platform_device s3c_device_camif;
+-
+ #endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/dma-core.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/dma-core.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/dma-core.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/dma-core.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,22 @@
++/* arch/arm/plat-s3c/include/plat/dma.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * Samsung S3C DMA core support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
++
++extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
++
++/* the currently allocated channel information */
++extern struct s3c2410_dma_chan s3c2410_chans[];
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/dma.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/dma.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/dma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/dma.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,128 @@
++/* arch/arm/plat-s3c/include/plat/dma.h
++ *
++ * Copyright (C) 2003,2004,2006 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++enum s3c2410_dma_buffresult {
++      S3C2410_RES_OK,
++      S3C2410_RES_ERR,
++      S3C2410_RES_ABORT
++};
++
++enum s3c2410_dmasrc {
++      S3C2410_DMASRC_HW,              /* source is memory */
++      S3C2410_DMASRC_MEM              /* source is hardware */
++};
++
++/* enum s3c2410_chan_op
++ *
++ * operation codes passed to the DMA code by the user, and also used
++ * to inform the current channel owner of any changes to the system state
++*/
++
++enum s3c2410_chan_op {
++      S3C2410_DMAOP_START,
++      S3C2410_DMAOP_STOP,
++      S3C2410_DMAOP_PAUSE,
++      S3C2410_DMAOP_RESUME,
++      S3C2410_DMAOP_FLUSH,
++      S3C2410_DMAOP_TIMEOUT,          /* internal signal to handler */
++      S3C2410_DMAOP_STARTED,          /* indicate channel started */
++};
++
++struct s3c2410_dma_client {
++      char                *name;
++};
++
++struct s3c2410_dma_chan;
++
++/* s3c2410_dma_cbfn_t
++ *
++ * buffer callback routine type
++*/
++
++typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
++                                 void *buf, int size,
++                                 enum s3c2410_dma_buffresult result);
++
++typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
++                                 enum s3c2410_chan_op );
++
++
++
++/* s3c2410_dma_request
++ *
++ * request a dma channel exclusivley
++*/
++
++extern int s3c2410_dma_request(unsigned int channel,
++                             struct s3c2410_dma_client *, void *dev);
++
++
++/* s3c2410_dma_ctrl
++ *
++ * change the state of the dma channel
++*/
++
++extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
++
++/* s3c2410_dma_setflags
++ *
++ * set the channel's flags to a given state
++*/
++
++extern int s3c2410_dma_setflags(unsigned int channel,
++                              unsigned int flags);
++
++/* s3c2410_dma_free
++ *
++ * free the dma channel (will also abort any outstanding operations)
++*/
++
++extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
++
++/* s3c2410_dma_enqueue
++ *
++ * place the given buffer onto the queue of operations for the channel.
++ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
++ * drained before the buffer is given to the DMA system.
++*/
++
++extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
++                             dma_addr_t data, int size);
++
++
++/* s3c2410_dma_config
++ *
++ * configure the dma channel
++*/
++
++extern int s3c2410_dma_config(unsigned int channel, int xferunit);
++
++/* s3c2410_dma_devconfig
++ *
++ * configure the device we're talking to
++*/
++
++extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
++                               unsigned long devaddr);
++
++/* s3c2410_dma_getposition
++ *
++ * get the position that the dma transfer is currently at
++*/
++
++extern int s3c2410_dma_getposition(unsigned int channel,
++                                 dma_addr_t *src, dma_addr_t *dest);
++
++extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
++extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/gpio-core.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/gpio-core.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/gpio-core.h   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/gpio-core.h        2009-05-10 22:27:59.000000000 +0200
+@@ -20,6 +20,19 @@
+  * specific code.
+ */
++struct s3c_gpio_chip;
++
++/**
++ * struct s3c_gpio_pm - power management (suspend/resume) information
++ * @save: Routine to save the state of the GPIO block
++ * @resume: Routine to resume the GPIO block.
++ */
++struct s3c_gpio_pm {
++      void (*save)(struct s3c_gpio_chip *chip);
++      void (*resume)(struct s3c_gpio_chip *chip);
++};
++
++
+ struct s3c_gpio_cfg;
+ /**
+@@ -27,6 +40,7 @@
+  * @chip: The chip structure to be exported via gpiolib.
+  * @base: The base pointer to the gpio configuration registers.
+  * @config: special function and pull-resistor control information.
++ * @pm_save: Save information for suspend/resume support.
+  *
+  * This wrapper provides the necessary information for the Samsung
+  * specific gpios being registered with gpiolib.
+@@ -34,7 +48,11 @@
+ struct s3c_gpio_chip {
+       struct gpio_chip        chip;
+       struct s3c_gpio_cfg     *config;
++      struct s3c_gpio_pm      *pm;
+       void __iomem            *base;
++#ifdef CONFIG_PM
++      u32                     pm_save[4];
++#endif
+ };
+ static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+@@ -75,3 +93,16 @@
+ static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+ #endif
++
++#ifdef CONFIG_PM
++extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
++#define __gpio_pm(x) x
++#else
++#define s3c_gpio_pm_1bit NULL
++#define s3c_gpio_pm_2bit NULL
++#define s3c_gpio_pm_4bit NULL
++#define __gpio_pm(x) NULL
++
++#endif /* CONFIG_PM */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/map-base.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/map-base.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/map-base.h    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/map-base.h 2009-05-10 22:27:59.000000000 +0200
+@@ -36,5 +36,7 @@
+ #define S3C_VA_TIMER  S3C_ADDR(0x00300000)    /* timer block */
+ #define S3C_VA_WATCHDOG       S3C_ADDR(0x00400000)    /* watchdog */
+ #define S3C_VA_UART   S3C_ADDR(0x01000000)    /* UART */
++#define S3C_VA_OTG    S3C_ADDR(0x03900000)    /* OTG */
++#define S3C_VA_OTGSFR S3C_ADDR(0x03a00000)    /* OTGSFR */
+ #endif /* __ASM_PLAT_MAP_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/nand.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/nand.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/nand.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/nand.h     2009-05-10 22:27:59.000000000 +0200
+@@ -21,11 +21,14 @@
+  * partitions  = mtd partition list
+ */
++#define S3C2410_NAND_BBT      0x0001
++
+ struct s3c2410_nand_set {
+       unsigned int            disable_ecc : 1;
+       int                     nr_chips;
+       int                     nr_partitions;
++      unsigned int            flags;
+       char                    *name;
+       int                     *nr_map;
+       struct mtd_partition    *partitions;
+@@ -44,6 +47,9 @@
+       int                     nr_sets;
+       struct s3c2410_nand_set *sets;
++      /* force software_ecc at runtime */
++      int     software_ecc;
++
+       void                    (*select_chip)(struct s3c2410_nand_set *,
+                                              int chip);
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/pm.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/pm.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/pm.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/pm.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,184 @@
++/* linux/include/asm-arm/plat-s3c24xx/pm.h
++ *
++ * Copyright (c) 2004 Simtec Electronics
++ *    http://armlinux.simtec.co.uk/
++ *    Written by Ben Dooks, <ben@simtec.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/sysdev.h>
++
++/* s3c_pm_init
++ *
++ * called from board at initialisation time to setup the power
++ * management
++*/
++
++#ifdef CONFIG_PM
++
++extern __init int s3c_pm_init(void);
++
++#else
++
++static inline int s3c_pm_init(void)
++{
++      return 0;
++}
++#endif
++
++/* configuration for the IRQ mask over sleep */
++extern unsigned long s3c_irqwake_intmask;
++extern unsigned long s3c_irqwake_eintmask;
++
++/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
++extern unsigned long s3c_irqwake_intallow;
++extern unsigned long s3c_irqwake_eintallow;
++
++/* per-cpu sleep functions */
++
++extern void (*pm_cpu_prep)(void);
++extern void (*pm_cpu_sleep)(void);
++
++/* Flags for PM Control */
++
++extern unsigned long s3c_pm_flags;
++
++extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
++
++/* from sleep.S */
++
++extern int  s3c_cpu_save(unsigned long *saveblk);
++extern void s3c_cpu_resume(void);
++
++extern void s3c2410_cpu_suspend(void);
++
++extern unsigned long s3c_sleep_save_phys;
++
++/* sleep save info */
++
++/**
++ * struct sleep_save - save information for shared peripherals.
++ * @reg: Pointer to the register to save.
++ * @val: Holder for the value saved from reg.
++ *
++ * This describes a list of registers which is used by the pm core and
++ * other subsystem to save and restore register values over suspend.
++ */
++struct sleep_save {
++      void __iomem    *reg;
++      unsigned long   val;
++};
++
++#define SAVE_ITEM(x) \
++      { .reg = (x) }
++
++/**
++ * struct pm_uart_save - save block for core UART
++ * @ulcon: Save value for S3C2410_ULCON
++ * @ucon: Save value for S3C2410_UCON
++ * @ufcon: Save value for S3C2410_UFCON
++ * @umcon: Save value for S3C2410_UMCON
++ * @ubrdiv: Save value for S3C2410_UBRDIV
++ *
++ * Save block for UART registers to be held over sleep and restored if they
++ * are needed (say by debug).
++*/
++struct pm_uart_save {
++      u32     ulcon;
++      u32     ucon;
++      u32     ufcon;
++      u32     umcon;
++      u32     ubrdiv;
++      u32     udivslot;
++};
++
++/* helper functions to save/restore lists of registers. */
++
++extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
++extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
++extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
++
++#ifdef CONFIG_PM
++extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
++extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
++extern int s3c24xx_irq_resume(struct sys_device *dev);
++#else
++#define s3c_irqext_wake NULL
++#define s3c24xx_irq_suspend NULL
++#define s3c24xx_irq_resume  NULL
++#endif
++
++/* PM debug functions */
++
++#ifdef CONFIG_S3C2410_PM_DEBUG
++/**
++ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
++ * @msg: The message to print.
++ *
++ * This function is used mainly to debug the resume process before the system
++ * can rely on printk/console output. It uses the low-level debugging output
++ * routine printascii() to do its work.
++ */
++extern void s3c_pm_dbg(const char *msg, ...);
++
++#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
++#else
++#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
++#endif
++
++#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
++/**
++ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
++ * @set: set bits for the state of the LEDs
++ * @clear: clear bits for the state of the LEDs.
++ */
++extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
++
++#else
++static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
++#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
++
++/* suspend memory checking */
++
++#ifdef CONFIG_S3C2410_PM_CHECK
++extern void s3c_pm_check_prepare(void);
++extern void s3c_pm_check_restore(void);
++extern void s3c_pm_check_cleanup(void);
++extern void s3c_pm_check_store(void);
++#else
++#define s3c_pm_check_prepare() do { } while(0)
++#define s3c_pm_check_restore() do { } while(0)
++#define s3c_pm_check_cleanup() do { } while(0)
++#define s3c_pm_check_store()   do { } while(0)
++#endif
++
++/**
++ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
++ *
++ * Setup all the necessary GPIO pins for waking the system on external
++ * interrupt.
++ */
++extern void s3c_pm_configure_extint(void);
++
++/**
++ * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
++ *
++ * Restore the state of the GPIO pins after sleep, which may involve ensuring
++ * that we do not glitch the state of the pins from that the bootloader's
++ * resume code has done.
++*/
++extern void s3c_pm_restore_gpios(void);
++
++/**
++ * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
++ *
++ * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
++ */
++extern void s3c_pm_save_gpios(void);
++
++extern void s3c_pm_save_core(void);
++extern void s3c_pm_restore_core(void);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/pwm.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/pwm.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/pwm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/pwm.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,45 @@
++#ifndef __S3C2410_PWM_H
++#define __S3C2410_PWM_H
++
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++
++#include <mach/io.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <plat/regs-timer.h>
++
++enum pwm_timer {
++      PWM0,
++      PWM1,
++      PWM2,
++      PWM3,
++      PWM4
++};
++
++struct s3c2410_pwm {
++      enum pwm_timer timerid;
++      struct clk *pclk;
++      unsigned long pclk_rate;
++      unsigned long prescaler;
++      unsigned long divider;
++      unsigned long counter;
++      unsigned long comparer;
++};
++
++struct s3c24xx_pwm_platform_data{
++        /* callback to attach platform children (to enforce suspend / resume
++         * ordering */
++        void (*attach_child_devices)(struct device *parent_device);
++};
++
++int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_dumpregs(void);
++
++#endif /* __S3C2410_PWM_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,75 @@
++/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
++ *
++ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * S3C2412 IIS register definition
++*/
++
++#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
++#define __ASM_ARCH_REGS_S3C2412_IIS_H
++
++#define S3C2412_IISCON                        (0x00)
++#define S3C2412_IISMOD                        (0x04)
++#define S3C2412_IISFIC                        (0x08)
++#define S3C2412_IISPSR                        (0x0C)
++#define S3C2412_IISTXD                        (0x10)
++#define S3C2412_IISRXD                        (0x14)
++
++#define S3C2412_IISCON_LRINDEX                (1 << 11)
++#define S3C2412_IISCON_TXFIFO_EMPTY   (1 << 10)
++#define S3C2412_IISCON_RXFIFO_EMPTY   (1 << 9)
++#define S3C2412_IISCON_TXFIFO_FULL    (1 << 8)
++#define S3C2412_IISCON_RXFIFO_FULL    (1 << 7)
++#define S3C2412_IISCON_TXDMA_PAUSE    (1 << 6)
++#define S3C2412_IISCON_RXDMA_PAUSE    (1 << 5)
++#define S3C2412_IISCON_TXCH_PAUSE     (1 << 4)
++#define S3C2412_IISCON_RXCH_PAUSE     (1 << 3)
++#define S3C2412_IISCON_TXDMA_ACTIVE   (1 << 2)
++#define S3C2412_IISCON_RXDMA_ACTIVE   (1 << 1)
++#define S3C2412_IISCON_IIS_ACTIVE     (1 << 0)
++
++#define S3C64XX_IISMOD_IMS_PCLK               (0 << 10)
++#define S3C64XX_IISMOD_IMS_SYSMUX     (1 << 10)
++
++#define S3C2412_IISMOD_MASTER_INTERNAL        (0 << 10)
++#define S3C2412_IISMOD_MASTER_EXTERNAL        (1 << 10)
++#define S3C2412_IISMOD_SLAVE          (2 << 10)
++#define S3C2412_IISMOD_MASTER_MASK    (3 << 10)
++#define S3C2412_IISMOD_MODE_TXONLY    (0 << 8)
++#define S3C2412_IISMOD_MODE_RXONLY    (1 << 8)
++#define S3C2412_IISMOD_MODE_TXRX      (2 << 8)
++#define S3C2412_IISMOD_MODE_MASK      (3 << 8)
++#define S3C2412_IISMOD_LR_LLOW                (0 << 7)
++#define S3C2412_IISMOD_LR_RLOW                (1 << 7)
++#define S3C2412_IISMOD_SDF_IIS                (0 << 5)
++#define S3C2412_IISMOD_SDF_MSB                (1 << 5)
++#define S3C2412_IISMOD_SDF_LSB                (2 << 5)
++#define S3C2412_IISMOD_SDF_MASK               (3 << 5)
++#define S3C2412_IISMOD_RCLK_256FS     (0 << 3)
++#define S3C2412_IISMOD_RCLK_512FS     (1 << 3)
++#define S3C2412_IISMOD_RCLK_384FS     (2 << 3)
++#define S3C2412_IISMOD_RCLK_768FS     (3 << 3)
++#define S3C2412_IISMOD_RCLK_MASK      (3 << 3)
++#define S3C2412_IISMOD_BCLK_32FS      (0 << 1)
++#define S3C2412_IISMOD_BCLK_48FS      (1 << 1)
++#define S3C2412_IISMOD_BCLK_16FS      (2 << 1)
++#define S3C2412_IISMOD_BCLK_24FS      (3 << 1)
++#define S3C2412_IISMOD_BCLK_MASK      (3 << 1)
++#define S3C2412_IISMOD_8BIT           (1 << 0)
++
++#define S3C2412_IISPSR_PSREN          (1 << 15)
++
++#define S3C2412_IISFIC_TXFLUSH                (1 << 15)
++#define S3C2412_IISFIC_RXFLUSH                (1 << 7)
++#define S3C2412_IISFIC_TXCOUNT(x)     (((x) >>  8) & 0xf)
++#define S3C2412_IISFIC_RXCOUNT(x)     (((x) >>  0) & 0xf)
++
++
++
++#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-serial.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-serial.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-serial.h 2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-serial.h      2009-05-10 22:27:59.000000000 +0200
+@@ -189,6 +189,11 @@
+ #define S3C2443_DIVSLOT                 (0x2C)
++/* S3C64XX interrupt registers. */
++#define S3C64XX_UINTP         0x30
++#define S3C64XX_UINTSP                0x34
++#define S3C64XX_UINTM         0x38
++
+ #ifndef __ASSEMBLY__
+ /* struct s3c24xx_uart_clksrc
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-timer.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-timer.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-timer.h  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-timer.h       2009-05-10 22:27:59.000000000 +0200
+@@ -10,6 +10,8 @@
+  * S3C2410 Timer configuration
+ */
++#include <plat/map-base.h>
++
+ #ifndef __ASM_ARCH_REGS_TIMER_H
+ #define __ASM_ARCH_REGS_TIMER_H
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/regs-usb-hs-otg.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,360 @@
++/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
++ *
++ * This include file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++*/
++
++#ifndef __ASM_ARCH_REGS_USB_HS_OTG_H
++#define __ASM_ARCH_REGS_USB_HS_OTG_H
++
++/* USB2.0 OTG Controller register */
++#define S3C_USBOTG_PHYREG(x)  ((x) + 0x100000 /* S3C64XX_VA_OTGSFR */)
++#define S3C_USBOTG_PHYPWR             S3C_USBOTG_PHYREG(0x0)
++#define S3C_USBOTG_PHYCLK             S3C_USBOTG_PHYREG(0x4)
++#define S3C_USBOTG_RSTCON             S3C_USBOTG_PHYREG(0x8)
++
++/* USB2.0 OTG Controller register */
++/* Core Global Registers */
++#define S3C_USBOTGREG(x)              ((x) /*+ S3C64XX_VA_OTG */)
++/* OTG Control & Status */
++#define S3C_UDC_OTG_GOTGCTL           S3C_USBOTGREG(0x000)
++/* OTG Interrupt */
++#define S3C_UDC_OTG_GOTGINT           S3C_USBOTGREG(0x004)
++/* Core AHB Configuration */
++#define S3C_UDC_OTG_GAHBCFG           S3C_USBOTGREG(0x008)
++/* Core USB Configuration */
++#define S3C_UDC_OTG_GUSBCFG           S3C_USBOTGREG(0x00C)
++/* Core Reset */
++#define S3C_UDC_OTG_GRSTCTL           S3C_USBOTGREG(0x010)
++/* Core Interrupt */
++#define S3C_UDC_OTG_GINTSTS           S3C_USBOTGREG(0x014)
++/* Core Interrupt Mask */
++#define S3C_UDC_OTG_GINTMSK           S3C_USBOTGREG(0x018)
++/* Receive Status Debug Read/Status Read */
++#define S3C_UDC_OTG_GRXSTSR           S3C_USBOTGREG(0x01C)
++/* Receive Status Debug Pop/Status Pop */
++#define S3C_UDC_OTG_GRXSTSP           S3C_USBOTGREG(0x020)
++/* Receive FIFO Size */
++#define S3C_UDC_OTG_GRXFSIZ           S3C_USBOTGREG(0x024)
++/* Non-Periodic Transmit FIFO Size */
++#define S3C_UDC_OTG_GNPTXFSIZ S3C_USBOTGREG(0x028)
++/* Non-Periodic Transmit FIFO/Queue Status */
++#define S3C_UDC_OTG_GNPTXSTS  S3C_USBOTGREG(0x02C)
++
++/* Host Periodic Transmit FIFO Size */
++#define S3C_UDC_OTG_HPTXFSIZ  S3C_USBOTGREG(0x100)
++/* Device Periodic Transmit FIFO-1 Size */
++#define S3C_UDC_OTG_DPTXFSIZ1 S3C_USBOTGREG(0x104)
++/* Device Periodic Transmit FIFO-2 Size */
++#define S3C_UDC_OTG_DPTXFSIZ2 S3C_USBOTGREG(0x108)
++/* Device Periodic Transmit FIFO-3 Size */
++#define S3C_UDC_OTG_DPTXFSIZ3 S3C_USBOTGREG(0x10C)
++/* Device Periodic Transmit FIFO-4 Size */
++#define S3C_UDC_OTG_DPTXFSIZ4 S3C_USBOTGREG(0x110)
++/* Device Periodic Transmit FIFO-5 Size */
++#define S3C_UDC_OTG_DPTXFSIZ5 S3C_USBOTGREG(0x114)
++/* Device Periodic Transmit FIFO-6 Size */
++#define S3C_UDC_OTG_DPTXFSIZ6 S3C_USBOTGREG(0x118)
++/* Device Periodic Transmit FIFO-7 Size */
++#define S3C_UDC_OTG_DPTXFSIZ7 S3C_USBOTGREG(0x11C)
++/* Device Periodic Transmit FIFO-8 Size */
++#define S3C_UDC_OTG_DPTXFSIZ8 S3C_USBOTGREG(0x120)
++/* Device Periodic Transmit FIFO-9 Size */
++#define S3C_UDC_OTG_DPTXFSIZ9 S3C_USBOTGREG(0x124)
++/* Device Periodic Transmit FIFO-10 Size */
++#define S3C_UDC_OTG_DPTXFSIZ10        S3C_USBOTGREG(0x128)
++/* Device Periodic Transmit FIFO-11 Size */
++#define S3C_UDC_OTG_DPTXFSIZ11        S3C_USBOTGREG(0x12C)
++/* Device Periodic Transmit FIFO-12 Size */
++#define S3C_UDC_OTG_DPTXFSIZ12        S3C_USBOTGREG(0x130)
++/* Device Periodic Transmit FIFO-13 Size */
++#define S3C_UDC_OTG_DPTXFSIZ13        S3C_USBOTGREG(0x134)
++/* Device Periodic Transmit FIFO-14 Size */
++#define S3C_UDC_OTG_DPTXFSIZ14        S3C_USBOTGREG(0x138)
++/* Device Periodic Transmit FIFO-15 Size */
++#define S3C_UDC_OTG_DPTXFSIZ15        S3C_USBOTGREG(0x13C)
++
++/* Host Mode Registers
++ * Host Global Registers */
++/* Host Configuration */
++#define S3C_UDC_OTG_HCFG              S3C_USBOTGREG(0x400)
++/* Host Frame Interval */
++#define S3C_UDC_OTG_HFIR              S3C_USBOTGREG(0x404)
++/* Host Frame Number/Frame Time Remaining */
++#define S3C_UDC_OTG_HFNUM             S3C_USBOTGREG(0x408)
++/* Host Periodic Transmit FIFO/Queue Status */
++#define S3C_UDC_OTG_HPTXSTS           S3C_USBOTGREG(0x410)
++/* Host All Channels Interrupt */
++#define S3C_UDC_OTG_HAINT             S3C_USBOTGREG(0x414)
++/* Host All Channels Interrupt Mask */
++#define S3C_UDC_OTG_HAINTMSK  S3C_USBOTGREG(0x418)
++
++/* Host Port Control & Status Registers */
++#define S3C_UDC_OTG_HPRT              S3C_USBOTGREG(0x440)
++
++/* Host Channel-Specific Registers */
++/* Host Channel-0 Characteristics */
++#define  S3C_UDC_OTG_HCCHAR0  S3C_USBOTGREG(0x500)
++/* Host Channel-0 Split Control */
++#define  S3C_UDC_OTG_HCSPLT0  S3C_USBOTGREG(0x504)
++/* Host Channel-0 Interrupt */
++#define  S3C_UDC_OTG_HCINT0           S3C_USBOTGREG(0x508)
++/* Host Channel-0 Interrupt Mask */
++#define  S3C_UDC_OTG_HCINTMSK0        S3C_USBOTGREG(0x50C)
++/* Host Channel-0 Transfer Size */
++#define  S3C_UDC_OTG_HCTSIZ0  S3C_USBOTGREG(0x510)
++/* Host Channel-0 DMA Address */
++#define  S3C_UDC_OTG_HCDMA0           S3C_USBOTGREG(0x514)
++
++/* Device Mode Registers
++ * Device Global Registers */
++/* Device Configuration */
++#define  S3C_UDC_OTG_DCFG             S3C_USBOTGREG(0x800)
++/* Device Control */
++#define  S3C_UDC_OTG_DCTL             S3C_USBOTGREG(0x804)
++/* Device Status */
++#define  S3C_UDC_OTG_DSTS             S3C_USBOTGREG(0x808)
++/* Device IN Endpoint Common Interrupt Mask */
++#define  S3C_UDC_OTG_DIEPMSK  S3C_USBOTGREG(0x810)
++/* Device OUT Endpoint Common Interrupt Mask */
++#define  S3C_UDC_OTG_DOEPMSK  S3C_USBOTGREG(0x814)
++/* Device All Endpoints Interrupt */
++#define  S3C_UDC_OTG_DAINT            S3C_USBOTGREG(0x818)
++/* Device All Endpoints Interrupt Mask */
++#define  S3C_UDC_OTG_DAINTMSK S3C_USBOTGREG(0x81C)
++/* Device IN Token Sequence Learning Queue Read 1 */
++#define  S3C_UDC_OTG_DTKNQR1  S3C_USBOTGREG(0x820)
++/* Device IN Token Sequence Learning Queue Read 2 */
++#define  S3C_UDC_OTG_DTKNQR2  S3C_USBOTGREG(0x824)
++/* Device VBUS Discharge Time */
++#define  S3C_UDC_OTG_DVBUSDIS S3C_USBOTGREG(0x828)
++/* Device VBUS Pulsing Time */
++#define  S3C_UDC_OTG_DVBUSPULSE       S3C_USBOTGREG(0x82C)
++/* Device IN Token Sequence Learning Queue Read 3 */
++#define  S3C_UDC_OTG_DTKNQR3  S3C_USBOTGREG(0x830)
++/* Device IN Token Sequence Learning Queue Read 4 */
++#define  S3C_UDC_OTG_DTKNQR4  S3C_USBOTGREG(0x834)
++
++/* Device Logical IN Endpoint-Specific Registers */
++/* Device IN Endpoint 0 Control */
++#define  S3C_UDC_OTG_DIEPCTL0 S3C_USBOTGREG(0x900)
++/* Device IN Endpoint 0 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT0 S3C_USBOTGREG(0x908)
++/* Device IN Endpoint 0 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ0        S3C_USBOTGREG(0x910)
++/* Device IN Endpoint 0 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA0 S3C_USBOTGREG(0x914)
++
++/* Device IN Endpoint 2 Control */
++#define  S3C_UDC_OTG_DIEPCTL2 S3C_USBOTGREG(0x940)
++/* Device IN Endpoint 2 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT2 S3C_USBOTGREG(0x948)
++/* Device IN Endpoint 2 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ2        S3C_USBOTGREG(0x950)
++/* Device IN Endpoint 2 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA2 S3C_USBOTGREG(0x954)
++
++/* Device IN Endpoint 3 Control */
++#define  S3C_UDC_OTG_DIEPCTL3 S3C_USBOTGREG(0x960)
++/* Device IN Endpoint 3 Interrupt */
++#define  S3C_UDC_OTG_DIEPINT3 S3C_USBOTGREG(0x968)
++/* Device IN Endpoint 3 Transfer Size */
++#define  S3C_UDC_OTG_DIEPTSIZ3        S3C_USBOTGREG(0x970)
++/* Device IN Endpoint 3 DMA Address */
++#define  S3C_UDC_OTG_DIEPDMA3 S3C_USBOTGREG(0x974)
++
++/* Device Logical OUT Endpoint-Specific Registers */
++/* Device OUT Endpoint 0 Control */
++#define  S3C_UDC_OTG_DOEPCTL0 S3C_USBOTGREG(0xB00)
++/* Device OUT Endpoint 0 Interrupt */
++#define  S3C_UDC_OTG_DOEPINT0 S3C_USBOTGREG(0xB08)
++/* Device OUT Endpoint 0 Transfer Size */
++#define  S3C_UDC_OTG_DOEPTSIZ0        S3C_USBOTGREG(0xB10)
++/* Device OUT Endpoint 0 DMA Address */
++#define  S3C_UDC_OTG_DOEPDMA0 S3C_USBOTGREG(0xB14)
++
++/* Device OUT Endpoint 1 Control */
++#define  S3C_UDC_OTG_DOEPCTL1 S3C_USBOTGREG(0xB20)
++/* Device OUT Endpoint 1 Interrupt */
++#define  S3C_UDC_OTG_DOEPINT1 S3C_USBOTGREG(0xB28)
++/* Device OUT Endpoint 1 Transfer Size */
++#define  S3C_UDC_OTG_DOEPTSIZ1        S3C_USBOTGREG(0xB30)
++/* Device OUT Endpoint 1 DMA Address */
++#define  S3C_UDC_OTG_DOEPDMA1 S3C_USBOTGREG(0xB34)
++
++/* Endpoint FIFO address */
++#define S3C_UDC_OTG_EP0_FIFO  S3C_USBOTGREG(0x1000)
++#define S3C_UDC_OTG_EP1_FIFO  S3C_USBOTGREG(0x2000)
++#define S3C_UDC_OTG_EP2_FIFO  S3C_USBOTGREG(0x3000)
++#define S3C_UDC_OTG_EP3_FIFO  S3C_USBOTGREG(0x4000)
++#define S3C_UDC_OTG_EP4_FIFO  S3C_USBOTGREG(0x5000)
++#define S3C_UDC_OTG_EP5_FIFO  S3C_USBOTGREG(0x6000)
++#define S3C_UDC_OTG_EP6_FIFO  S3C_USBOTGREG(0x7000)
++#define S3C_UDC_OTG_EP7_FIFO  S3C_USBOTGREG(0x8000)
++#define S3C_UDC_OTG_EP8_FIFO  S3C_USBOTGREG(0x9000)
++
++/* S3C_USBOTG_PHYPWR */
++#define OTG_ENABLE                    (0x0<<4)
++#define OTG_DISABLE                   (0x1<<4)
++#define ANALOG_PWR_UP         (0x0<<3)
++#define ANALOG_PWR_DOWN               (0x1<<3)
++#define SUSPEND_DISABLE               (0x0<<0)
++#define SUSPEND_ENABLE                (0x1<<0)
++
++/* S3C_USBOTG_PHYCLK */
++#define REF_CLK_CRYSTAL               (0x0<<5)
++#define REF_CLK_OSCC          (0x1<<5)
++
++/* S3C_USBOTG_RSTCON */
++#define SW_RST_OFF                    (0x0<<0)
++#define SW_RST_ON                     (0x1<<0)
++
++/* S3C_UDC_OTG_GOTGCTL */
++#define B_SESSION_VALID               (0x1<<19)
++#define A_SESSION_VALID               (0x1<<18)
++
++/* S3C_UDC_OTG_GAHBCFG */
++#define PTXFE_HALF                    (0x0<<8)
++#define PTXFE_ZERO                    (0x1<<8)
++#define NPTXFE_HALF                   (0x0<<7)
++#define NPTXFE_ZERO                   (0x1<<7)
++#define MODE_SLAVE                    (0x0<<5)
++#define MODE_DMA                      (0x1<<5)
++#define BURST_SINGLE          (0x0<<1)
++#define BURST_INCR                    (0x1<<1)
++#define BURST_INCR4                   (0x3<<1)
++#define BURST_INCR8                   (0x5<<1)
++#define BURST_INCR16          (0x7<<1)
++#define GBL_INT_UNMASK                (0x1<<0)
++#define GBL_INT_MASK          (0x0<<0)
++
++/* S3C_UDC_OTG_GUSBCFG */
++#define PHY_CLK_480M          (0x0<<15)
++#define PHY_CLK_48M                   (0x1<<15)
++#define TXFIFO_RE_DIS         (0x0<<14)
++#define TXFIFO_RE_EN          (0x1<<14)
++#define TURN_AROUND                   (0x5<<10)
++#define HNP_DISABLE                   (0x0<<9)
++#define HNP_ENABLE                    (0x1<<9)
++#define SRP_DISABLE                   (0x0<<8)
++#define SRP_ENABLE                    (0x1<<8)
++#define ULPI_DDR                      (0x0<<7)
++#define HS_UTMI                               (0x0<<6)
++#define INTERF_UTMI                   (0x0<<4)
++#define INTERF_ULPI                   (0x1<<4)
++#define PHY_INTERF_8          (0x0<<3)
++#define PHY_INTERF_16         (0x1<<3)
++#define TIME_OUT_CAL          (0x7<<0)
++
++/* S3C_UDC_OTG_GRSTCTL */
++#define AHB_MASTER_IDLE               (1u<<31)
++#define CORE_SOFT_RESET               (0x1<<0)
++
++/* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */
++#define INT_RESUME                    (0x1<<31)
++#define INT_DISCONN                   (0x1<<29)
++#define INT_CONN_CNG          (0x1<<28)
++#define INT_OUT_EP                    (0x1<<19)
++#define INT_IN_EP                     (0x1<<18)
++#define INT_ENUMDONE          (0x1<<13)
++#define INT_RESET                     (0x1<<12)
++#define INT_SUSPEND                   (0x1<<11)
++#define INT_EARLY_SUSPEND     (0x1<<10)
++#define INT_TX_FIFO_EMPTY     (0x1<<5)
++#define INT_RX_FIFO_NOT_EMPTY (0x1<<4)
++#define INT_SOF                               (0x1<<3)
++#define INT_DEV_MODE          (0x0<<0)
++#define INT_HOST_MODE         (0x1<<1)
++
++#define FULL_SPEED_CONTROL_PKT_SIZE           8
++#define FULL_SPEED_BULK_PKT_SIZE              64
++
++#define HIGH_SPEED_CONTROL_PKT_SIZE           64
++#define HIGH_SPEED_BULK_PKT_SIZE              512
++
++/* S3C_UDC_OTG_DSTS */
++#define RX_FIFO_SIZE          (2048<<0)
++#define NPTX_FIFO_START_ADDR  (RX_FIFO_SIZE<<0)
++#define NPTX_FIFO_SIZE                (2048<<16)
++#define PTX_FIFO_SIZE         (2048<<16)
++#define USB_HIGH_30_60MHZ     (0x0<<1)
++#define USB_FULL_30_60MHZ     (0x1<<1)
++#define USB_LOW_6MHZ          (0x2<<1)
++#define USB_FULL_48MHZ                (0x3<<1)
++
++/* S3C_UDC_OTG_GRXSTSP */
++#define BYTE_COUNT(x)         ((x & (0x7FF<<4)) >> 4)
++#define PKT_STS(x)                    ((x & (0xF<<17)) >> 17)
++#define EP_NUM(x)                     (x & 0xF)
++
++#define OUT_PKT_RECEIVED      (0x2)
++#define OUT_COMPLELTED                (0x3)
++#define SETUP_COMPLETED               (0x4)
++#define SETUP_PKT_RECEIVED    (0x6)
++
++/* S3C_UDC_OTG_DCFG */
++#define EP_MIS_CNT(x)         (x<<18)
++#define DEVICE_ADDR(x)                (x<<4)
++#define SPEED_2_HIGH          (0x0<<0)
++#define SPEED_2_FULL          (0x1<<0)
++#define SPEED_1_LOW                   (0x2<<0)
++#define SPEED_1_FULL          (0x3<<0)
++
++/* S3C_UDC_OTG_DCTL device control register */
++#define NORMAL_OPERATION      (0x1<<0)
++#define SOFT_DISCONNECT               (0x1<<1)
++
++/* S3C_UDC_OTG_DSTS */
++#define ENUM_SPEED(x)         (x & (0x3<<1))
++#define FRAME_CNT(x)          (x & (0x3ff<<8))
++
++/* S3C_UDC_OTG_DAINT device all endpoint interrupt register */
++#define S3C_UDC_INT_IN_EP0    (0x1<<0)
++#define S3C_UDC_INT_IN_EP2    (0x1<<2)
++#define S3C_UDC_INT_IN_EP3    (0x1<<3)
++#define S3C_UDC_INT_OUT_EP0   (0x1<<16)
++#define S3C_UDC_INT_OUT_EP1   (0x1<<17)
++#define S3C_UDC_INT_OUT_EP4   (0x1<<20)
++
++/* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device control
++   IN/OUT endpoint 0 control register */
++#define DEPCTL_EPENA          (0x1<<31)
++#define DEPCTL_EPDIS          (0x1<<30)
++#define DEPCTL_SNAK                   (0x1<<27)
++#define DEPCTL_CNAK                   (0x1<<26)
++#define DEPCTL_CTRL_TYPE      (0x0<<18)
++#define DEPCTL_ISO_TYPE               (0x1<<18)
++#define DEPCTL_BULK_TYPE      (0x2<<18)
++#define DEPCTL_INTR_TYPE      (0x3<<18)
++#define DEPCTL_USBACTEP               (0x1<<15)
++#define DEPCTL0_MPS_64                (0x0<<0)
++#define DEPCTL0_MPS_32                (0x1<<0)
++#define DEPCTL0_MPS_16                (0x2<<0)
++#define DEPCTL0_MPS_8         (0x3<<0)
++
++/* S3C_UDC_OTG_DIEPINTn */
++#define IN_EP_NAK_EFF         (0x1<<6)
++#define IN_TK_EPMIS                   (0x1<<5)
++#define IN_TK_TXFEMP          (0x1<<4)
++#define IN_EP_TIMEOUT         (0x1<<3)
++
++/* S3C_UDC_OTG_DOEPINTn */
++#define BACK2BACK_SETUP               (0x1<<6)
++#define OUT_TK_EP_DIS         (0x1<<4)
++#define SETUP_PHASE_DONE      (0x1<<3)
++
++/* S3C_UDC_OTG_DIEPINTn/DOEPINTn */
++#define AHB_ERROR                     (0x1<<2)
++#define EPDISBLD                      (0x1<<1)
++#define TRANSFER_DONE         (0x1<<0)
++
++/* S3C_UDC_OTG_DIEPTSIZn */
++#define PKT_CNT(x)                    (x<<19)
++#define XFERSIZE(x)                   (x<<0)
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/sdhci.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/sdhci.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/sdhci.h       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/sdhci.h    2009-05-10 22:27:59.000000000 +0200
+@@ -29,6 +29,7 @@
+  *            is necessary the controllers and/or GPIO blocks require the
+  *          changing of driver-strength and other controls dependant on
+  *          the card and speed of operation.
++ * sdhci_host: Pointer kept during init, allows presence change notification
+  *
+  * Initialisation data specific to either the machine or the platform
+  * for the device driver to use or call-back when configuring gpio or
+@@ -45,8 +46,11 @@
+                           void __iomem *regbase,
+                           struct mmc_ios *ios,
+                           struct mmc_card *card);
++      struct sdhci_host * sdhci_host;
+ };
++extern void sdhci_s3c_force_presence_change(struct platform_device *pdev);
++
+ /**
+  * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+  * @pd: Platform data to register to device.
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/usb-control.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/usb-control.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/include/plat/usb-control.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/include/plat/usb-control.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,41 @@
++/* arch/arm/plat-s3c/include/plat/usb-control.h
++ *
++ * Copyright (c) 2004 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C2410 - usb port information
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#ifndef __ASM_ARCH_USBCONTROL_H
++#define __ASM_ARCH_USBCONTROL_H "arch/arm/plat-s3c/include/plat/usb-control.h"
++
++#define S3C_HCDFLG_USED       (1)
++
++struct s3c2410_hcd_port {
++      unsigned char   flags;
++      unsigned char   power;
++      unsigned char   oc_status;
++      unsigned char   oc_changed;
++};
++
++struct s3c2410_hcd_info {
++      struct usb_hcd          *hcd;
++      struct s3c2410_hcd_port port[2];
++
++      void            (*power_control)(int port, int to);
++      void            (*enable_oc)(struct s3c2410_hcd_info *, int on);
++      void            (*report_oc)(struct s3c2410_hcd_info *, int ports);
++};
++
++static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
++{
++      if (info->report_oc != NULL) {
++              (info->report_oc)(info, ports);
++      }
++}
++
++#endif /*__ASM_ARCH_USBCONTROL_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/init.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/init.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/init.c     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/init.c  2009-05-10 22:27:59.000000000 +0200
+@@ -31,6 +31,34 @@
+ static struct cpu_table *cpu;
++static void __init set_system_rev(unsigned int idcode)
++{
++      /*
++       * system_rev encoding is as follows
++       * system_rev & 0xff000000 -> S3C Class (24xx/64xx)
++       * system_rev & 0xfff00000 -> S3C Sub Class (241x/244x)
++       * system_rev & 0xffff0000 -> S3C Type (2410/2440/6400/6410)
++       *
++       * Remaining[15:0] are preserved from the value set by ATAG
++       *
++       * Exception:
++       *  Store Revision A to 1 such as
++       *  s3c2410A to s3c2411
++       *  s3c2440A to s3c2441
++       */
++
++      system_rev &= 0xffff;
++      system_rev |= (idcode & 0x0ffff000) << 4;
++
++      if (idcode == 0x32410002 || idcode == 0x32440001)
++              system_rev |= (0x1 << 16);
++      if (idcode == 0x32440aaa        /* s3c2442 */
++          || idcode == 0x32440aab)    /* s3c2442b */
++              system_rev |= (0x2 << 16);
++      if (idcode == 0x0)              /* s3c2400 */
++              system_rev |= (0x2400 << 16);
++}
++
+ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+                                               struct cpu_table *tab,
+                                               unsigned int count)
+@@ -53,6 +81,8 @@
+               panic("Unknown S3C24XX CPU");
+       }
++      set_system_rev(idcode);
++
+       printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+       if (cpu->map_io == NULL || cpu->init == NULL) {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/Kconfig    2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/Kconfig 2009-05-10 22:27:59.000000000 +0200
+@@ -71,6 +71,15 @@
+         Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+         for more information.
++config S3C_PM_DEBUG_LED_SMDK
++       bool "SMDK LED suspend/resume debugging"
++       depends on PM && (MACH_SMDK6410)
++       help
++         Say Y here to enable the use of the SMDK LEDs on the baseboard
++       for debugging of the state of the suspend and resume process.
++
++       Note, this currently only works for S3C64XX based SMDK boards.
++
+ config S3C2410_PM_CHECK
+       bool "S3C2410 PM Suspend Memory CRC"
+       depends on PM && CRC32
+@@ -150,6 +159,18 @@
+         Internal configuration to enable S3C64XX style GPIO configuration
+         functions.
++# DMA
++
++config S3C_DMA
++      bool
++      help
++        Internal configuration for S3C DMA core
++
++config S3C_PWM
++      bool
++      help
++        PWM timer code for the S3C2410, and similar processors
++
+ # device definitions to compile in
+ config S3C_DEV_HSMMC
+@@ -172,4 +193,14 @@
+       help
+         Compile in platform device definition for framebuffer
++config S3C_DEV_USB_HOST
++      bool
++      help
++        Compile in platform device definition for USB host.
++
++config S3C_DEV_CAMIF
++      bool
++      help
++        Compile in platform device definitions for camera interface code
++
+ endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/Makefile   2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/Makefile        2009-05-10 22:27:59.000000000 +0200
+@@ -18,6 +18,16 @@
+ obj-y                         += gpio.o
+ obj-y                         += gpio-config.o
++# DMA support
++
++obj-$(CONFIG_S3C_DMA)         += dma.o
++
++# PM support
++
++obj-$(CONFIG_PM)              += pm.o
++obj-$(CONFIG_PM)              += pm-gpio.o
++obj-$(CONFIG_S3C2410_PM_CHECK)        += pm-check.o
++
+ # devices
+ obj-$(CONFIG_S3C_DEV_HSMMC)   += dev-hsmmc.o
+@@ -25,3 +35,9 @@
+ obj-y                         += dev-i2c0.o
+ obj-$(CONFIG_S3C_DEV_I2C1)    += dev-i2c1.o
+ obj-$(CONFIG_S3C_DEV_FB)      += dev-fb.o
++obj-$(CONFIG_S3C_DEV_USB_HOST)        += dev-usb.o
++obj-$(CONFIG_S3C_DEV_CAMIF)   += dev-camif.o
++
++obj-$(CONFIG_S3C_PWM)         += pwm.o
++obj-$(CONFIG_S3C_DMA)         += dma.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,375 @@
++/* linux/arch/arm/plat-s3c/pm.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2004,2006,2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C common power management (suspend to ram) support.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/init.h>
++#include <linux/suspend.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/serial_core.h>
++#include <linux/io.h>
++
++#include <asm/cacheflush.h>
++#include <mach/hardware.h>
++#include <mach/map.h>
++
++#include <plat/regs-serial.h>
++#include <mach/regs-clock.h>
++#include <mach/regs-irq.h>
++#include <asm/irq.h>
++
++#include <plat/pm.h>
++#include <plat/pm-core.h>
++
++/* for external use */
++
++unsigned long s3c_pm_flags;
++
++/* Debug code:
++ *
++ * This code supports debug output to the low level UARTs for use on
++ * resume before the console layer is available.
++*/
++
++#ifdef CONFIG_S3C2410_PM_DEBUG
++extern void printascii(const char *);
++
++void s3c_pm_dbg(const char *fmt, ...)
++{
++      va_list va;
++      char buff[256];
++
++      va_start(va, fmt);
++      vsprintf(buff, fmt, va);
++      va_end(va);
++
++      printascii(buff);
++}
++
++static inline void s3c_pm_debug_init(void)
++{
++      /* restart uart clocks so we can use them to output */
++      s3c_pm_debug_init_uart();
++}
++
++#else
++#define s3c_pm_debug_init() do { } while(0)
++
++#endif /* CONFIG_S3C2410_PM_DEBUG */
++
++/* Save the UART configurations if we are configured for debug. */
++
++unsigned char pm_uart_udivslot;
++
++#ifdef CONFIG_S3C2410_PM_DEBUG
++
++struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
++
++static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
++{
++      void __iomem *regs = S3C_VA_UARTx(uart);
++
++      save->ulcon = __raw_readl(regs + S3C2410_ULCON);
++      save->ucon = __raw_readl(regs + S3C2410_UCON);
++      save->ufcon = __raw_readl(regs + S3C2410_UFCON);
++      save->umcon = __raw_readl(regs + S3C2410_UMCON);
++      save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
++
++      if (pm_uart_udivslot)
++              save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
++
++      S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
++                uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
++}
++
++static void s3c_pm_save_uarts(void)
++{
++      struct pm_uart_save *save = uart_save;
++      unsigned int uart;
++
++      for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
++              s3c_pm_save_uart(uart, save);
++}
++
++static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
++{
++      void __iomem *regs = S3C_VA_UARTx(uart);
++
++      s3c_pm_arch_update_uart(regs, save);
++
++      __raw_writel(save->ulcon, regs + S3C2410_ULCON);
++      __raw_writel(save->ucon,  regs + S3C2410_UCON);
++      __raw_writel(save->ufcon, regs + S3C2410_UFCON);
++      __raw_writel(save->umcon, regs + S3C2410_UMCON);
++      __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
++
++      if (pm_uart_udivslot)
++              __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
++}
++
++static void s3c_pm_restore_uarts(void)
++{
++      struct pm_uart_save *save = uart_save;
++      unsigned int uart;
++
++      for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
++              s3c_pm_restore_uart(uart, save);
++}
++#else
++static void s3c_pm_save_uarts(void) { }
++static void s3c_pm_restore_uarts(void) { }
++#endif
++
++/* The IRQ ext-int code goes here, it is too small to currently bother
++ * with its own file. */
++
++unsigned long s3c_irqwake_intmask     = 0xffffffffL;
++unsigned long s3c_irqwake_eintmask    = 0xffffffffL;
++
++int s3c_irqext_wake(unsigned int irqno, unsigned int state)
++{
++      unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
++
++      if (!(s3c_irqwake_eintallow & bit))
++              return -ENOENT;
++
++      printk(KERN_INFO "wake %s for irq %d\n",
++             state ? "enabled" : "disabled", irqno);
++
++      if (!state)
++              s3c_irqwake_eintmask |= bit;
++      else
++              s3c_irqwake_eintmask &= ~bit;
++
++      return 0;
++}
++
++/* helper functions to save and restore register state */
++
++/**
++ * s3c_pm_do_save() - save a set of registers for restoration on resume.
++ * @ptr: Pointer to an array of registers.
++ * @count: Size of the ptr array.
++ *
++ * Run through the list of registers given, saving their contents in the
++ * array for later restoration when we wakeup.
++ */
++void s3c_pm_do_save(struct sleep_save *ptr, int count)
++{
++      for (; count > 0; count--, ptr++) {
++              ptr->val = __raw_readl(ptr->reg);
++              S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
++      }
++}
++
++/**
++ * s3c_pm_do_restore() - restore register values from the save list.
++ * @ptr: Pointer to an array of registers.
++ * @count: Size of the ptr array.
++ *
++ * Restore the register values saved from s3c_pm_do_save().
++ *
++ * Note, we do not use S3C_PMDBG() in here, as the system may not have
++ * restore the UARTs state yet
++*/
++
++void s3c_pm_do_restore(struct sleep_save *ptr, int count)
++{
++      for (; count > 0; count--, ptr++) {
++              printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
++                     ptr->reg, ptr->val, __raw_readl(ptr->reg));
++
++              __raw_writel(ptr->val, ptr->reg);
++      }
++}
++
++/**
++ * s3c_pm_do_restore_core() - early restore register values from save list.
++ *
++ * This is similar to s3c_pm_do_restore() except we try and minimise the
++ * side effects of the function in case registers that hardware might need
++ * to work has been restored.
++ *
++ * WARNING: Do not put any debug in here that may effect memory or use
++ * peripherals, as things may be changing!
++*/
++
++void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
++{
++      for (; count > 0; count--, ptr++)
++              __raw_writel(ptr->val, ptr->reg);
++}
++
++/* s3c2410_pm_show_resume_irqs
++ *
++ * print any IRQs asserted at resume time (ie, we woke from)
++*/
++static void s3c_pm_show_resume_irqs(int start, unsigned long which,
++                                  unsigned long mask)
++{
++      int i;
++
++      which &= ~mask;
++
++      for (i = 0; i <= 31; i++) {
++              if (which & (1L<<i)) {
++                      S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
++              }
++      }
++}
++
++
++void (*pm_cpu_prep)(void);
++void (*pm_cpu_sleep)(void);
++
++#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
++
++/* s3c_pm_enter
++ *
++ * central control for sleep/resume process
++*/
++
++static int s3c_pm_enter(suspend_state_t state)
++{
++      unsigned long regs_save[16];
++
++      /* ensure the debug is initialised (if enabled) */
++
++      s3c_pm_debug_init();
++
++      S3C_PMDBG("%s(%d)\n", __func__, state);
++
++      if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
++              printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
++              return -EINVAL;
++      }
++
++      /* check if we have anything to wake-up with... bad things seem
++       * to happen if you suspend with no wakeup (system will often
++       * require a full power-cycle)
++      */
++
++      if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
++          !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
++              printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
++              printk(KERN_ERR "%s: Aborting sleep\n", __func__);
++              return -EINVAL;
++      }
++
++      /* store the physical address of the register recovery block */
++
++      s3c_sleep_save_phys = virt_to_phys(regs_save);
++
++      S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
++
++      /* save all necessary core registers not covered by the drivers */
++
++      s3c_pm_save_gpios();
++      s3c_pm_save_uarts();
++      s3c_pm_save_core();
++
++      /* set the irq configuration for wake */
++
++      s3c_pm_configure_extint();
++
++      S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
++          s3c_irqwake_intmask, s3c_irqwake_eintmask);
++
++      s3c_pm_arch_prepare_irqs();
++
++      /* call cpu specific preparation */
++
++      pm_cpu_prep();
++
++      /* flush cache back to ram */
++
++      flush_cache_all();
++
++      s3c_pm_check_store();
++
++      /* send the cpu to sleep... */
++
++      s3c_pm_arch_stop_clocks();
++
++      /* s3c2410_cpu_save will also act as our return point from when
++       * we resume as it saves its own register state, so use the return
++       * code to differentiate return from save and return from sleep */
++
++      if (s3c_cpu_save(regs_save) == 0) {
++              flush_cache_all();
++              pm_cpu_sleep();
++      }
++
++      /* restore the cpu state using the kernel's cpu init code. */
++
++      cpu_init();
++
++      /* restore the system state */
++
++      s3c_pm_restore_core();
++      s3c_pm_restore_uarts();
++      s3c_pm_restore_gpios();
++
++      s3c_pm_debug_init();
++
++      /* check what irq (if any) restored the system */
++
++      s3c_pm_arch_show_resume_irqs();
++
++      S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
++
++      s3c_pm_check_restore();
++
++      /* LEDs should now be 1110 */
++      s3c_pm_debug_smdkled(1 << 1, 0);
++
++      /* ok, let's return from sleep */
++
++      S3C_PMDBG("S3C PM Resume (post-restore)\n");
++      return 0;
++}
++
++static int s3c_pm_prepare(void)
++{
++      /* prepare check area if configured */
++
++      s3c_pm_check_prepare();
++      return 0;
++}
++
++static void s3c_pm_finish(void)
++{
++      s3c_pm_check_cleanup();
++}
++
++static struct platform_suspend_ops s3c_pm_ops = {
++      .enter          = s3c_pm_enter,
++      .prepare        = s3c_pm_prepare,
++      .finish         = s3c_pm_finish,
++      .valid          = suspend_valid_only_mem,
++};
++
++/* s3c_pm_init
++ *
++ * Attach the power management functions. This should be called
++ * from the board specific initialisation if the board supports
++ * it.
++*/
++
++int __init s3c_pm_init(void)
++{
++      printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
++
++      suspend_set_ops(&s3c_pm_ops);
++      return 0;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm-check.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm-check.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm-check.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm-check.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,242 @@
++/* linux/arch/arm/plat-s3c/pm-check.c
++ *  originally in linux/arch/arm/plat-s3c24xx/pm.c
++ *
++ * Copyright (c) 2004,2006,2008 Simtec Electronics
++ *    http://armlinux.simtec.co.uk
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C Power Mangament - suspend/resume memory corruptiuon check.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/suspend.h>
++#include <linux/init.h>
++#include <linux/crc32.h>
++#include <linux/ioport.h>
++
++#include <plat/pm.h>
++
++#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
++#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
++#endif
++
++/* suspend checking code...
++ *
++ * this next area does a set of crc checks over all the installed
++ * memory, so the system can verify if the resume was ok.
++ *
++ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
++ * increasing it will mean that the area corrupted will be less easy to spot,
++ * and reducing the size will cause the CRC save area to grow
++*/
++
++#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
++
++static u32 crc_size;  /* size needed for the crc block */
++static u32 *crcs;     /* allocated over suspend/resume */
++
++typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
++
++/* s3c_pm_run_res
++ *
++ * go through the given resource list, and look for system ram
++*/
++
++static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
++{
++      while (ptr != NULL) {
++              if (ptr->child != NULL)
++                      s3c_pm_run_res(ptr->child, fn, arg);
++
++              if ((ptr->flags & IORESOURCE_MEM) &&
++                  strcmp(ptr->name, "System RAM") == 0) {
++                      S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
++                                (unsigned long)ptr->start,
++                                (unsigned long)ptr->end);
++                      arg = (fn)(ptr, arg);
++              }
++
++              ptr = ptr->sibling;
++      }
++}
++
++static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
++{
++      s3c_pm_run_res(&iomem_resource, fn, arg);
++}
++
++static u32 *s3c_pm_countram(struct resource *res, u32 *val)
++{
++      u32 size = (u32)(res->end - res->start)+1;
++
++      size += CHECK_CHUNKSIZE-1;
++      size /= CHECK_CHUNKSIZE;
++
++      S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
++                (unsigned long)res->start, (unsigned long)res->end, size);
++
++      *val += size * sizeof(u32);
++      return val;
++}
++
++/* s3c_pm_prepare_check
++ *
++ * prepare the necessary information for creating the CRCs. This
++ * must be done before the final save, as it will require memory
++ * allocating, and thus touching bits of the kernel we do not
++ * know about.
++*/
++
++void s3c_pm_check_prepare(void)
++{
++      crc_size = 0;
++
++      s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
++
++      S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
++
++      crcs = kmalloc(crc_size+4, GFP_KERNEL);
++      if (crcs == NULL)
++              printk(KERN_ERR "Cannot allocated CRC save area\n");
++}
++
++static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
++{
++      unsigned long addr, left;
++
++      for (addr = res->start; addr < res->end;
++           addr += CHECK_CHUNKSIZE) {
++              left = res->end - addr;
++
++              if (left > CHECK_CHUNKSIZE)
++                      left = CHECK_CHUNKSIZE;
++
++              *val = crc32_le(~0, phys_to_virt(addr), left);
++              val++;
++      }
++
++      return val;
++}
++
++/* s3c_pm_check_store
++ *
++ * compute the CRC values for the memory blocks before the final
++ * sleep.
++*/
++
++void s3c_pm_check_store(void)
++{
++      if (crcs != NULL)
++              s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
++}
++
++/* in_region
++ *
++ * return TRUE if the area defined by ptr..ptr+size contains the
++ * what..what+whatsz
++*/
++
++static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
++{
++      if ((what+whatsz) < ptr)
++              return 0;
++
++      if (what > (ptr+size))
++              return 0;
++
++      return 1;
++}
++
++/**
++ * s3c_pm_runcheck() - helper to check a resource on restore.
++ * @res: The resource to check
++ * @vak: Pointer to list of CRC32 values to check.
++ *
++ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
++ * function runs the given memory resource checking it against the stored
++ * CRC to ensure that memory is restored. The function tries to skip as
++ * many of the areas used during the suspend process.
++ */
++static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
++{
++      void *save_at = phys_to_virt(s3c_sleep_save_phys);
++      unsigned long addr;
++      unsigned long left;
++      void *stkpage;
++      void *ptr;
++      u32 calc;
++
++      stkpage = (void *)((u32)&calc & ~PAGE_MASK);
++
++      for (addr = res->start; addr < res->end;
++           addr += CHECK_CHUNKSIZE) {
++              left = res->end - addr;
++
++              if (left > CHECK_CHUNKSIZE)
++                      left = CHECK_CHUNKSIZE;
++
++              ptr = phys_to_virt(addr);
++
++              if (in_region(ptr, left, stkpage, 4096)) {
++                      S3C_PMDBG("skipping %08lx, has stack in\n", addr);
++                      goto skip_check;
++              }
++
++              if (in_region(ptr, left, crcs, crc_size)) {
++                      S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
++                      goto skip_check;
++              }
++
++              if (in_region(ptr, left, save_at, 32*4 )) {
++                      S3C_PMDBG("skipping %08lx, has save block in\n", addr);
++                      goto skip_check;
++              }
++
++              /* calculate and check the checksum */
++
++              calc = crc32_le(~0, ptr, left);
++              if (calc != *val) {
++                      printk(KERN_ERR "Restore CRC error at "
++                             "%08lx (%08x vs %08x)\n", addr, calc, *val);
++
++                      S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
++                          addr, calc, *val);
++              }
++
++      skip_check:
++              val++;
++      }
++
++      return val;
++}
++
++/**
++ * s3c_pm_check_restore() - memory check called on resume
++ *
++ * check the CRCs after the restore event and free the memory used
++ * to hold them
++*/
++void s3c_pm_check_restore(void)
++{
++      if (crcs != NULL)
++              s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
++}
++
++/**
++ * s3c_pm_check_cleanup() - free memory resources
++ *
++ * Free the resources that where allocated by the suspend
++ * memory check code. We do this separately from the
++ * s3c_pm_check_restore() function as we cannot call any
++ * functions that might sleep during that resume.
++ */
++void s3c_pm_check_cleanup(void)
++{
++      kfree(crcs);
++      crcs = NULL;
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm-gpio.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm-gpio.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pm-gpio.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pm-gpio.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,378 @@
++/* linux/arch/arm/plat-s3c/pm-gpio.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C series GPIO PM code
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++
++#include <mach/gpio-core.h>
++#include <plat/pm.h>
++
++/* PM GPIO helpers */
++
++#define OFFS_CON      (0x00)
++#define OFFS_DAT      (0X04)
++#define OFFS_UP               (0X08)
++
++static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
++{
++      chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++      chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++}
++
++static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
++{
++      void __iomem *base = chip->base;
++      u32 old_gpcon = __raw_readl(base + OFFS_CON);
++      u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++      u32 gps_gpcon = chip->pm_save[0];
++      u32 gps_gpdat = chip->pm_save[1];
++      u32 gpcon;
++
++      /* GPACON only has one bit per control / data and no PULLUPs.
++       * GPACON[x] = 0 => Output, 1 => SFN */
++
++      /* first set all SFN bits to SFN */
++
++      gpcon = old_gpcon | gps_gpcon;
++      __raw_writel(gpcon, base + OFFS_CON);
++
++      /* now set all the other bits */
++
++      __raw_writel(gps_gpdat, base + OFFS_DAT);
++      __raw_writel(gps_gpcon, base + OFFS_CON);
++
++      S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++                chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_1bit = {
++      .save   = s3c_gpio_pm_1bit_save,
++      .resume = s3c_gpio_pm_1bit_resume,
++};
++
++static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
++{
++      chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++      chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++      chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
++}
++
++/* Test whether the given masked+shifted bits of an GPIO configuration
++ * are one of the SFN (special function) modes. */
++
++static inline int is_sfn(unsigned long con)
++{
++      return con >= 2;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an input */
++
++static inline int is_in(unsigned long con)
++{
++      return con == 0;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an output */
++
++static inline int is_out(unsigned long con)
++{
++      return con == 1;
++}
++
++/**
++ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
++ * @chip: The chip information to resume.
++ *
++ * Restore one of the GPIO banks that was saved during suspend. This is
++ * not as simple as once thought, due to the possibility of glitches
++ * from the order that the CON and DAT registers are set in.
++ *
++ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
++ * combinations of changes to check. Three of these, if the pin stays
++ * in the same configuration can be discounted. This leaves us with
++ * the following:
++ *
++ * { IN => OUT }  Change DAT first
++ * { IN => SFN }  Change CON first
++ * { OUT => SFN } Change CON first, so new data will not glitch
++ * { OUT => IN }  Change CON first, so new data will not glitch
++ * { SFN => IN }  Change CON first
++ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
++ *
++ * We do not currently deal with the UP registers as these control
++ * weak resistors, so a small delay in change should not need to bring
++ * these into the calculations.
++ *
++ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
++ *     state for when it is next output.
++ */
++static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
++{
++      void __iomem *base = chip->base;
++      u32 old_gpcon = __raw_readl(base + OFFS_CON);
++      u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++      u32 gps_gpcon = chip->pm_save[0];
++      u32 gps_gpdat = chip->pm_save[1];
++      u32 gpcon, old, new, mask;
++      u32 change_mask = 0x0;
++      int nr;
++
++      /* restore GPIO pull-up settings */
++      __raw_writel(chip->pm_save[2], base + OFFS_UP);
++
++      /* Create a change_mask of all the items that need to have
++       * their CON value changed before their DAT value, so that
++       * we minimise the work between the two settings.
++       */
++
++      for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
++              old = (old_gpcon & mask) >> nr;
++              new = (gps_gpcon & mask) >> nr;
++
++              /* If there is no change, then skip */
++
++              if (old == new)
++                      continue;
++
++              /* If both are special function, then skip */
++
++              if (is_sfn(old) && is_sfn(new))
++                      continue;
++
++              /* Change is IN => OUT, do not change now */
++
++              if (is_in(old) && is_out(new))
++                      continue;
++
++              /* Change is SFN => OUT, do not change now */
++
++              if (is_sfn(old) && is_out(new))
++                      continue;
++
++              /* We should now be at the case of IN=>SFN,
++               * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++              change_mask |= mask;
++      }
++
++
++      /* Write the new CON settings */
++
++      gpcon = old_gpcon & ~change_mask;
++      gpcon |= gps_gpcon & change_mask;
++
++      __raw_writel(gpcon, base + OFFS_CON);
++
++      /* Now change any items that require DAT,CON */
++
++      __raw_writel(gps_gpdat, base + OFFS_DAT);
++      __raw_writel(gps_gpcon, base + OFFS_CON);
++
++      S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++                chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_2bit = {
++      .save   = s3c_gpio_pm_2bit_save,
++      .resume = s3c_gpio_pm_2bit_resume,
++};
++
++#ifdef CONFIG_ARCH_S3C64XX
++static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
++{
++      chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
++      chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
++      chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
++
++      if (chip->chip.ngpio > 8)
++              chip->pm_save[0] = __raw_readl(chip->base - 4);
++}
++
++static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
++{
++      u32 old, new, mask;
++      u32 change_mask = 0x0;
++      int nr;
++
++      for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
++              old = (old_gpcon & mask) >> nr;
++              new = (gps_gpcon & mask) >> nr;
++
++              /* If there is no change, then skip */
++
++              if (old == new)
++                      continue;
++
++              /* If both are special function, then skip */
++
++              if (is_sfn(old) && is_sfn(new))
++                      continue;
++
++              /* Change is IN => OUT, do not change now */
++
++              if (is_in(old) && is_out(new))
++                      continue;
++
++              /* Change is SFN => OUT, do not change now */
++
++              if (is_sfn(old) && is_out(new))
++                      continue;
++
++              /* We should now be at the case of IN=>SFN,
++               * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++              change_mask |= mask;
++      }
++
++      return change_mask;
++}
++
++static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
++{
++      void __iomem *con = chip->base + (index * 4);
++      u32 old_gpcon = __raw_readl(con);
++      u32 gps_gpcon = chip->pm_save[index + 1];
++      u32 gpcon, mask;
++
++      mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
++
++      gpcon = old_gpcon & ~mask;
++      gpcon |= gps_gpcon & mask;
++
++      __raw_writel(gpcon, con);
++}
++
++static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
++{
++      void __iomem *base = chip->base;
++      u32 old_gpcon[2];
++      u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++      u32 gps_gpdat = chip->pm_save[2];
++
++      /* First, modify the CON settings */
++
++      old_gpcon[0] = 0;
++      old_gpcon[1] = __raw_readl(base + OFFS_CON);
++
++      s3c_gpio_pm_4bit_con(chip, 0);
++      if (chip->chip.ngpio > 8) {
++              old_gpcon[0] = __raw_readl(base - 4);
++              s3c_gpio_pm_4bit_con(chip, -1);
++      }
++
++      /* Now change the configurations that require DAT,CON */
++
++      __raw_writel(chip->pm_save[2], base + OFFS_DAT);
++      __raw_writel(chip->pm_save[1], base + OFFS_CON);
++      if (chip->chip.ngpio > 8)
++              __raw_writel(chip->pm_save[0], base - 4);
++
++      __raw_writel(chip->pm_save[2], base + OFFS_DAT);
++      __raw_writel(chip->pm_save[3], base + OFFS_UP);
++
++      if (chip->chip.ngpio > 8) {
++              S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
++                        chip->chip.label, old_gpcon[0], old_gpcon[1],
++                        __raw_readl(base - 4),
++                        __raw_readl(base + OFFS_CON),
++                        old_gpdat, gps_gpdat);
++      } else
++              S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
++                        chip->chip.label, old_gpcon[1],
++                        __raw_readl(base + OFFS_CON),
++                        old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_4bit = {
++      .save   = s3c_gpio_pm_4bit_save,
++      .resume = s3c_gpio_pm_4bit_resume,
++};
++#endif /* CONFIG_ARCH_S3C64XX */
++
++/**
++ * s3c_pm_save_gpio() - save gpio chip data for suspend
++ * @ourchip: The chip for suspend.
++ */
++static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
++{
++      struct s3c_gpio_pm *pm = ourchip->pm;
++
++      if (pm == NULL || pm->save == NULL)
++              S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++      else
++              pm->save(ourchip);
++}
++
++/**
++ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
++ *
++ * For all the GPIO banks, save the state of each one ready for going
++ * into a suspend mode.
++ */
++void s3c_pm_save_gpios(void)
++{
++      struct s3c_gpio_chip *ourchip;
++      unsigned int gpio_nr;
++
++      for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++              ourchip = s3c_gpiolib_getchip(gpio_nr);
++              if (!ourchip)
++                      continue;
++
++              s3c_pm_save_gpio(ourchip);
++
++              S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
++                        ourchip->chip.label,
++                        ourchip->pm_save[0],
++                        ourchip->pm_save[1],
++                        ourchip->pm_save[2],
++                        ourchip->pm_save[3]);
++
++              gpio_nr += ourchip->chip.ngpio;
++              gpio_nr += CONFIG_S3C_GPIO_SPACE;
++      }
++}
++
++/**
++ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
++ * @ourchip: The suspended chip.
++ */
++static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
++{
++      struct s3c_gpio_pm *pm = ourchip->pm;
++
++      if (pm == NULL || pm->resume == NULL)
++              S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++      else
++              pm->resume(ourchip);
++}
++
++void s3c_pm_restore_gpios(void)
++{
++      struct s3c_gpio_chip *ourchip;
++      unsigned int gpio_nr;
++
++      for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++              ourchip = s3c_gpiolib_getchip(gpio_nr);
++              if (!ourchip)
++                      continue;
++
++              s3c_pm_resume_gpio(ourchip);
++
++              gpio_nr += ourchip->chip.ngpio;
++              gpio_nr += CONFIG_S3C_GPIO_SPACE;
++      }
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pwm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pwm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/pwm.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/pwm.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,288 @@
++/*
++ * arch/arm/plat-s3c/pwm.c
++ *
++ * Copyright (c) by Javi Roman <javiroman@kernel-labs.org>
++ *             for the Openmoko Project.
++ *
++ *     S3C2410A SoC PWM support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <mach/hardware.h>
++#include <plat/regs-timer.h>
++#include <plat/pwm.h>
++#include <asm/io.h>
++
++#ifdef CONFIG_PM
++      static unsigned long standby_reg_tcon;
++      static unsigned long standby_reg_tcfg0;
++      static unsigned long standby_reg_tcfg1;
++#endif
++
++int s3c2410_pwm_disable(struct s3c2410_pwm *pwm)
++{
++      unsigned long tcon;
++
++      /* stop timer */
++      tcon = __raw_readl(S3C2410_TCON);
++      tcon &= 0xffffff00;
++      __raw_writel(tcon, S3C2410_TCON);
++
++      clk_disable(pwm->pclk);
++      clk_put(pwm->pclk);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_disable);
++
++int s3c2410_pwm_init(struct s3c2410_pwm *pwm)
++{
++      pwm->pclk = clk_get(NULL, "timers");
++      if (IS_ERR(pwm->pclk))
++              return PTR_ERR(pwm->pclk);
++
++      clk_enable(pwm->pclk);
++      pwm->pclk_rate = clk_get_rate(pwm->pclk);
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_init);
++
++int s3c2410_pwm_enable(struct s3c2410_pwm *pwm)
++{
++      unsigned long tcfg0, tcfg1, tcnt, tcmp;
++
++      /* control registers bits */
++      tcfg1 = __raw_readl(S3C2410_TCFG1);
++      tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++      /* divider & scaler slection */
++      switch (pwm->timerid) {
++      case PWM0:
++              tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK;
++              tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++              break;
++      case PWM1:
++              tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK;
++              tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++              break;
++      case PWM2:
++              tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK;
++              tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++              break;
++      case PWM3:
++              tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK;
++              tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++              break;
++      case PWM4:
++              /* timer four is not capable of doing PWM */
++              break;
++      default:
++              clk_disable(pwm->pclk);
++              clk_put(pwm->pclk);
++              return -1;
++      }
++
++      /* divider & scaler values */
++      tcfg1 |= pwm->divider;
++      __raw_writel(tcfg1, S3C2410_TCFG1);
++
++      switch (pwm->timerid) {
++      case PWM0:
++      case PWM1:
++              tcfg0 |= pwm->prescaler;
++              __raw_writel(tcfg0, S3C2410_TCFG0);
++              break;
++      default:
++              if ((tcfg0 | pwm->prescaler) != tcfg0) {
++                      printk(KERN_WARNING "not changing prescaler of PWM %u,"
++                             " since it's shared with timer4 (clock tick)\n",
++                             pwm->timerid);
++              }
++              break;
++      }
++
++      /* timer count and compare buffer initial values */
++      tcnt = pwm->counter;
++      tcmp = pwm->comparer;
++
++      __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid));
++      __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid));
++
++      /* ensure timer is stopped */
++      s3c2410_pwm_stop(pwm);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_enable);
++
++int s3c2410_pwm_start(struct s3c2410_pwm *pwm)
++{
++      unsigned long tcon;
++
++      tcon = __raw_readl(S3C2410_TCON);
++
++      switch (pwm->timerid) {
++      case PWM0:
++              tcon |= S3C2410_TCON_T0START;
++              tcon &= ~S3C2410_TCON_T0MANUALUPD;
++              break;
++      case PWM1:
++              tcon |= S3C2410_TCON_T1START;
++              tcon &= ~S3C2410_TCON_T1MANUALUPD;
++              break;
++      case PWM2:
++              tcon |= S3C2410_TCON_T2START;
++              tcon &= ~S3C2410_TCON_T2MANUALUPD;
++              break;
++      case PWM3:
++              tcon |= S3C2410_TCON_T3START;
++              tcon &= ~S3C2410_TCON_T3MANUALUPD;
++              break;
++      case PWM4:
++              /* timer four is not capable of doing PWM */
++      default:
++              return -ENODEV;
++      }
++
++      __raw_writel(tcon, S3C2410_TCON);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_start);
++
++int s3c2410_pwm_stop(struct s3c2410_pwm *pwm)
++{
++      unsigned long tcon;
++
++      tcon = __raw_readl(S3C2410_TCON);
++
++      switch (pwm->timerid) {
++      case PWM0:
++              tcon &= ~0x00000000;
++              tcon |= S3C2410_TCON_T0RELOAD;
++              tcon |= S3C2410_TCON_T0MANUALUPD;
++              break;
++      case PWM1:
++              tcon &= ~0x00000080;
++              tcon |= S3C2410_TCON_T1RELOAD;
++              tcon |= S3C2410_TCON_T1MANUALUPD;
++              break;
++      case PWM2:
++              tcon &= ~0x00000800;
++              tcon |= S3C2410_TCON_T2RELOAD;
++              tcon |= S3C2410_TCON_T2MANUALUPD;
++              break;
++      case PWM3:
++              tcon &= ~0x00008000;
++              tcon |= S3C2410_TCON_T3RELOAD;
++              tcon |= S3C2410_TCON_T3MANUALUPD;
++              break;
++      case PWM4:
++              /* timer four is not capable of doing PWM */
++      default:
++              return -ENODEV;
++      }
++
++      __raw_writel(tcon, S3C2410_TCON);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_stop);
++
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm)
++{
++      __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid));
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle);
++
++int s3c2410_pwm_dumpregs(void)
++{
++      printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n",
++                      (unsigned long) __raw_readl(S3C2410_TCON),
++                      (unsigned long) __raw_readl(S3C2410_TCFG0),
++                      (unsigned long) __raw_readl(S3C2410_TCFG1));
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs);
++
++static int __init s3c24xx_pwm_probe(struct platform_device *pdev)
++{
++      struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data;
++
++      dev_info(&pdev->dev, "s3c24xx_pwm is registered \n");
++
++      /* if platform was interested, give him a chance to register
++       * platform devices that switch power with us as the parent
++       * at registration time -- ensures suspend / resume ordering
++       */
++      if (pdata)
++              if (pdata->attach_child_devices)
++                      (pdata->attach_child_devices)(&pdev->dev);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      /* PWM config should be kept in suspending */
++      standby_reg_tcon = __raw_readl(S3C2410_TCON);
++      standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0);
++      standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++      return 0;
++}
++
++static int s3c24xx_pwm_resume(struct platform_device *pdev)
++{
++      __raw_writel(standby_reg_tcon, S3C2410_TCON);
++      __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0);
++      __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1);
++
++      return 0;
++}
++#else
++#define s3c24xx_pwm_suspend   NULL
++#define s3c24xx_pwm_resume    NULL
++#endif
++
++static struct platform_driver s3c24xx_pwm_driver = {
++      .driver = {
++              .name   = "s3c24xx_pwm",
++              .owner  = THIS_MODULE,
++      },
++      .probe   = s3c24xx_pwm_probe,
++      .suspend = s3c24xx_pwm_suspend,
++      .resume  = s3c24xx_pwm_resume,
++};
++
++static int __init s3c24xx_pwm_init(void)
++{
++      return platform_driver_register(&s3c24xx_pwm_driver);
++}
++
++static void __exit s3c24xx_pwm_exit(void)
++{
++}
++
++MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>");
++MODULE_LICENSE("GPL");
++
++module_init(s3c24xx_pwm_init);
++module_exit(s3c24xx_pwm_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/time.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/time.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c/time.c     2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c/time.c  2009-05-10 22:27:59.000000000 +0200
+@@ -97,7 +97,7 @@
+  * IRQs are disabled before entering here from do_gettimeofday()
+  */
+-static unsigned long s3c2410_gettimeoffset (void)
++unsigned long s3c2410_gettimeoffset (void)
+ {
+       unsigned long tdone;
+       unsigned long tval;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/clock-dclk.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/clock-dclk.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/clock-dclk.c   2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/clock-dclk.c        2009-05-10 22:27:59.000000000 +0200
+@@ -18,6 +18,7 @@
+ #include <mach/regs-clock.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+ #include <plat/clock.h>
+ #include <plat/cpu.h>
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/common-smdk.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/common-smdk.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/common-smdk.c  2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/common-smdk.c       2009-05-10 22:27:59.000000000 +0200
+@@ -201,5 +201,5 @@
+       platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
+-      s3c2410_pm_init();
++      s3c_pm_init();
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/cpu.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/cpu.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/cpu.c  2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/cpu.c       2009-05-10 22:27:59.000000000 +0200
+@@ -61,6 +61,7 @@
+ static const char name_s3c2412[]  = "S3C2412";
+ static const char name_s3c2440[]  = "S3C2440";
+ static const char name_s3c2442[]  = "S3C2442";
++static const char name_s3c2442b[]  = "S3C2442B";
+ static const char name_s3c2443[]  = "S3C2443";
+ static const char name_s3c2410a[] = "S3C2410A";
+ static const char name_s3c2440a[] = "S3C2440A";
+@@ -112,6 +113,15 @@
+               .name           = name_s3c2442
+       },
+       {
++              .idcode         = 0x32440aab,
++              .idmask         = 0xffffffff,
++              .map_io         = s3c244x_map_io,
++              .init_clocks    = s3c244x_init_clocks,
++              .init_uarts     = s3c244x_init_uarts,
++              .init           = s3c2442_init,
++              .name           = name_s3c2442b
++      },
++      {
+               .idcode         = 0x32412001,
+               .idmask         = 0xffffffff,
+               .map_io         = s3c2412_map_io,
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/devs.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/devs.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/devs.c 2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/devs.c      2009-05-10 22:27:59.000000000 +0200
+@@ -26,6 +26,8 @@
+ #include <asm/mach/irq.h>
+ #include <mach/fb.h>
+ #include <mach/hardware.h>
++#include <mach/ts.h>
++#include <asm/io.h>
+ #include <asm/irq.h>
+ #include <plat/regs-serial.h>
+@@ -136,36 +138,6 @@
+ struct platform_device *s3c24xx_uart_devs[4] = {
+ };
+-/* USB Host Controller */
+-
+-static struct resource s3c_usb_resource[] = {
+-      [0] = {
+-              .start = S3C24XX_PA_USBHOST,
+-              .end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+-              .flags = IORESOURCE_MEM,
+-      },
+-      [1] = {
+-              .start = IRQ_USBH,
+-              .end   = IRQ_USBH,
+-              .flags = IORESOURCE_IRQ,
+-      }
+-};
+-
+-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+-
+-struct platform_device s3c_device_usb = {
+-      .name             = "s3c2410-ohci",
+-      .id               = -1,
+-      .num_resources    = ARRAY_SIZE(s3c_usb_resource),
+-      .resource         = s3c_usb_resource,
+-      .dev              = {
+-              .dma_mask = &s3c_device_usb_dmamask,
+-              .coherent_dma_mask = 0xffffffffUL
+-      }
+-};
+-
+-EXPORT_SYMBOL(s3c_device_usb);
+-
+ /* LCD Controller */
+ static struct resource s3c_lcd_resource[] = {
+@@ -229,6 +201,24 @@
+ EXPORT_SYMBOL(s3c_device_nand);
++/* Touchscreen */
++struct platform_device s3c_device_ts = {
++      .name             = "s3c2410-ts",
++      .id               = -1,
++};
++
++EXPORT_SYMBOL(s3c_device_ts);
++
++static struct s3c2410_ts_mach_info s3c2410ts_info;
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
++{
++      memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
++             sizeof(struct s3c2410_ts_mach_info));
++      s3c_device_ts.dev.platform_data = &s3c2410ts_info;
++}
++EXPORT_SYMBOL(set_s3c2410ts_info);
++
+ /* USB Device (Gadget)*/
+ static struct resource s3c_usbgadget_resource[] = {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/dma.c  2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -31,10 +31,11 @@
+ #include <asm/irq.h>
+ #include <mach/hardware.h>
+ #include <mach/dma.h>
+-
+ #include <mach/map.h>
+-#include <plat/dma.h>
++#include <plat/dma-core.h>
++#include <plat/regs-dma.h>
++#include <plat/dma-plat.h>
+ /* io map for dma */
+ static void __iomem *dma_base;
+@@ -44,8 +45,6 @@
+ static struct s3c24xx_dma_selection dma_sel;
+-/* dma channel state information */
+-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+ /* debugging functions */
+@@ -135,21 +134,6 @@
+ #define dbg_showchan(chan) do { } while(0)
+ #endif /* CONFIG_S3C2410_DMA_DEBUG */
+-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+-
+-/* lookup_dma_channel
+- *
+- * change the dma channel number given into a real dma channel id
+-*/
+-
+-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+-{
+-      if (channel & DMACH_LOW_LEVEL)
+-              return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+-      else
+-              return dma_chan_map[channel];
+-}
+-
+ /* s3c2410_dma_stats_timeout
+  *
+  * Update DMA stats from timeout info
+@@ -214,8 +198,6 @@
+       return 0;
+ }
+-
+-
+ /* s3c2410_dma_loadbuffer
+  *
+  * load a buffer, and update the channel state
+@@ -453,7 +435,7 @@
+ int s3c2410_dma_enqueue(unsigned int channel, void *id,
+                       dma_addr_t data, int size)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+       struct s3c2410_dma_buf *buf;
+       unsigned long flags;
+@@ -804,7 +786,7 @@
+ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+       unsigned long flags;
+       if (chan == NULL)
+@@ -836,7 +818,7 @@
+       chan->irq_claimed = 0;
+       if (!(channel & DMACH_LOW_LEVEL))
+-              dma_chan_map[channel] = NULL;
++              s3c_dma_chan_map[channel] = NULL;
+       local_irq_restore(flags);
+@@ -995,7 +977,7 @@
+ int
+ s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+       if (chan == NULL)
+               return -EINVAL;
+@@ -1038,14 +1020,13 @@
+ /* s3c2410_dma_config
+  *
+  * xfersize:     size of unit in bytes (1,2,4)
+- * dcon:         base value of the DCONx register
+ */
+ int s3c2410_dma_config(unsigned int channel,
+-                     int xferunit,
+-                     int dcon)
++                     int xferunit)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++      unsigned int dcon;
+       pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+                __func__, channel, xferunit, dcon);
+@@ -1055,10 +1036,33 @@
+       pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
+-      dcon |= chan->dcon & dma_sel.dcon_mask;
++      dcon = chan->dcon & dma_sel.dcon_mask;
+       pr_debug("%s: New dcon is %08x\n", __func__, dcon);
++      switch (chan->req_ch) {
++      case DMACH_I2S_IN:
++      case DMACH_I2S_OUT:
++      case DMACH_PCM_IN:
++      case DMACH_PCM_OUT:
++      case DMACH_MIC_IN:
++      default:
++              dcon |= S3C2410_DCON_HANDSHAKE;
++              dcon |= S3C2410_DCON_SYNC_PCLK;
++              break;
++
++      case DMACH_SDI:
++              /* note, ensure if need HANDSHAKE or not */
++              dcon |= S3C2410_DCON_SYNC_PCLK;
++              break;          
++
++      case DMACH_XD0:
++      case DMACH_XD1:
++              dcon |= S3C2410_DCON_HANDSHAKE;
++              dcon |= S3C2410_DCON_SYNC_HCLK;
++              break;
++      }
++
+       switch (xferunit) {
+       case 1:
+               dcon |= S3C2410_DCON_BYTE;
+@@ -1089,10 +1093,10 @@
+ }
+ EXPORT_SYMBOL(s3c2410_dma_config);
+-
++#if 0 /* moved to plat-s3c? */
+ int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+       if (chan == NULL)
+               return -EINVAL;
+@@ -1105,43 +1109,7 @@
+ }
+ EXPORT_SYMBOL(s3c2410_dma_setflags);
+-
+-
+-/* do we need to protect the settings of the fields from
+- * irq?
+-*/
+-
+-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+-{
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+-
+-      if (chan == NULL)
+-              return -EINVAL;
+-
+-      pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+-
+-      chan->op_fn = rtn;
+-
+-      return 0;
+-}
+-
+-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+-
+-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+-{
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+-
+-      if (chan == NULL)
+-              return -EINVAL;
+-
+-      pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+-
+-      chan->callback_fn = rtn;
+-
+-      return 0;
+-}
+-
+-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
++#endif
+ /* s3c2410_dma_devconfig
+  *
+@@ -1150,29 +1118,38 @@
+  * source:    S3C2410_DMASRC_HW: source is hardware
+  *            S3C2410_DMASRC_MEM: source is memory
+  *
+- * hwcfg:     the value for xxxSTCn register,
+- *            bit 0: 0=increment pointer, 1=leave pointer
+- *            bit 1: 0=source is AHB, 1=source is APB
+- *
+  * devaddr:   physical address of the source
+ */
+ int s3c2410_dma_devconfig(int channel,
+                         enum s3c2410_dmasrc source,
+-                        int hwcfg,
+                         unsigned long devaddr)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++      unsigned int hwcfg;
+       if (chan == NULL)
+               return -EINVAL;
+-      pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+-               __func__, (int)source, hwcfg, devaddr);
++      pr_debug("%s: source=%d, devaddr=%08lx\n",
++               __func__, (int)source, devaddr);
+       chan->source = source;
+       chan->dev_addr = devaddr;
+-      chan->hw_cfg = hwcfg;
++
++      switch (chan->req_ch) {
++      case DMACH_XD0:
++      case DMACH_XD1:
++              hwcfg = 0; /* AHB */
++              break;
++
++      default:
++              hwcfg = S3C2410_DISRCC_APB;
++      }
++
++      /* always assume our peripheral desintation is a fixed
++       * address in memory. */
++       hwcfg |= S3C2410_DISRCC_INC;
+       switch (source) {
+       case S3C2410_DMASRC_HW:
+@@ -1219,7 +1196,7 @@
+ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
+ {
+-      struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+       if (chan == NULL)
+               return -EINVAL;
+@@ -1278,8 +1255,8 @@
+       printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+-      s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
+-      s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
++      s3c2410_dma_config(no, cp->xfer_unit);
++      s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
+       /* re-select the dma source for this channel */
+@@ -1476,7 +1453,8 @@
+  found:
+       dmach = &s3c2410_chans[ch];
+       dmach->map = ch_map;
+-      dma_chan_map[channel] = dmach;
++      dmach->req_ch = channel;
++      s3c_dma_chan_map[channel] = dmach;
+       /* select the channel */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gpio.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gpio.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gpio.c 2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gpio.c      2009-05-10 22:27:59.000000000 +0200
+@@ -32,6 +32,7 @@
+ #include <asm/irq.h>
+ #include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
+ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+ {
+@@ -215,3 +216,423 @@
+ }
+ EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
++
++static void pretty_dump(u32 cfg, u32 state, u32 pull,
++                      const char ** function_names_2,
++                      const char ** function_names_3,
++                      const char * prefix,
++                      int count)
++{
++      int n;
++      const char *tag_type = NULL,
++                 *tag_state = NULL,
++                 *tag_pulldown = NULL,
++                 * level0 = "0",
++                 * level1 = "1";
++
++      for (n = 0; n < count; n++) {
++              switch ((cfg >> (2 * n)) & 3) {
++              case 0:
++                      tag_type = "input      ";
++                      break;
++              case 1:
++                      tag_type = "OUTPUT     ";
++                      break;
++              case 2:
++                      if (function_names_2) {
++                              if (function_names_2[n])
++                                      tag_type = function_names_2[n];
++                              else
++                                      tag_type = "*** ILLEGAL CFG (2) *** ";
++                      } else
++                              tag_type = "(function) ";
++                      break;
++              default:
++                      if (function_names_3) {
++                              if (function_names_3[n])
++                                      tag_type = function_names_3[n];
++                              else
++                                      tag_type = "*** ILLEGAL CFG (3) *** ";
++                      } else
++                              tag_type = "(function) ";
++                      break;
++              }
++              if ((state >> n) & 1)
++                      tag_state = level1;
++              else
++                      tag_state = level0;
++
++              if (((pull >> n) & 1))
++                      tag_pulldown = "";
++              else
++                      tag_pulldown = "(pulldown)";
++
++              printk(KERN_INFO"%s%02d: %s %s %s\n", prefix, n, tag_type,
++                                                    tag_state, tag_pulldown);
++      }
++      printk(KERN_INFO"\n");
++}
++
++static void pretty_dump_a(u32 cfg, u32 state,
++                        const char ** function_names,
++                        const char * prefix,
++                        int count)
++{
++      int n;
++      const char *tag_type = NULL,
++                 *tag_state = NULL,
++                 * level0 = "0",
++                 * level1 = "1";
++
++      for (n = 0; n < count; n++) {
++              switch ((cfg >> n) & 1) {
++              case 0:
++                      tag_type = "OUTPUT     ";
++                      break;
++              default:
++                      if (function_names) {
++                              if (function_names[n])
++                                      tag_type = function_names[n];
++                              else
++                                      tag_type = "*** ILLEGAL CFG *** ";
++                      } else
++                              tag_type = "(function) ";
++                      break;
++              }
++              if ((state >> n) & 1)
++                      tag_state = level1;
++              else
++                      tag_state = level0;
++
++              printk(KERN_INFO"%s%02d: %s %s\n", prefix, n, tag_type,
++                                                 tag_state);
++      }
++      printk(KERN_INFO"\n");
++}
++
++static const char * funcs_a[] = {
++      "ADDR0      ",
++      "ADDR16     ",
++      "ADDR17     ",
++      "ADDR18     ",
++      "ADDR19     ",
++      "ADDR20     ",
++      "ADDR21     ",
++      "ADDR22     ",
++      "ADDR23     ",
++      "ADDR24     ",
++      "ADDR25     ",
++      "ADDR26     ",
++      "nGCS[1]    ",
++      "nGCS[2]    ",
++      "nGCS[3]    ",
++      "nGCS[4]    ",
++      "nGCS[5]    ",
++      "CLE        ",
++      "ALE        ",
++      "nFWE       ",
++      "nFRE       ",
++      "nRSTOUT    ",
++      "nFCE       ",
++      NULL,
++      NULL
++};
++
++
++static const char * funcs_b2[] = {
++      "TOUT0      ",
++      "TOUT1      ",
++      "TOUT2      ",
++      "TOUT3      ",
++      "TCLK[0]    ",
++      "nXBACK     ",
++      "nXBREQ     ",
++      "nXDACK1    ",
++      "nXDREQ1    ",
++      "nXDACK0    ",
++      "nXDREQ0    ",
++};
++static const char * funcs_b3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++};
++
++static const char * funcs_c2[] = {
++      "LEND       ",
++      "VCLK       ",
++      "VLINE      ",
++      "VFRAME     ",
++      "VM         ",
++      "LCD_LPCOE  ",
++      "LCD_LPCREV ",
++      "LCD_LPCREVB",
++      "VD[0]      ",
++      "VD[1]      ",
++      "VD[2]      ",
++      "VD[3]      ",
++      "VD[4]      ",
++      "VD[5]      ",
++      "VD[6]      ",
++      "VD[7]      ",
++};
++static const char * funcs_c3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      "I2SSDI     ",
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++};
++
++static const char * funcs_d2[] = {
++      "VD[8]      ",
++      "VD[9]      ",
++      "VD[10]     ",
++      "VD[11]     ",
++      "VD[12]     ",
++      "VD[13]     ",
++      "VD[14]     ",
++      "VD[15]     ",
++      "VD[16]     ",
++      "VD[17]     ",
++      "VD[18]     ",
++      "VD[19]     ",
++      "VD[20]     ",
++      "VD[21]     ",
++      "VD[22]     ",
++      "VD[23]     ",
++};
++static const char * funcs_d3[] = {
++      "nSPICS1    ",
++      "SPICLK1    ",
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      "SPIMISO1   ",
++      "SPIMOSI1   ",
++      "SPICLK1    ",
++      NULL,
++      NULL,
++      NULL,
++      "nSS1       ",
++      "nSS0       ",
++};
++
++static const char * funcs_e2[] = {
++      "I2SLRCK    ",
++      "I2SSCLK    ",
++      "CDCLK      ",
++      "I2SDI      ",
++      "I2SDO      ",
++      "SDCLK      ",
++      "SDCMD      ",
++      "SDDAT0     ",
++      "SDDAT1     ",
++      "SDDAT2     ",
++      "SDDAT3     ",
++      "SPIMISO0   ",
++      "SPIMOSI0   ",
++      "SPICLK0    ",
++      "IICSCL     ",
++      "IICSDA     ",
++};
++static const char * funcs_e3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++};
++
++static const char * funcs_f2[] = {
++      "EINT[0]    ",
++      "EINT[1]    ",
++      "EINT[2]    ",
++      "EINT[3]    ",
++      "EINT[4]    ",
++      "EINT[5]    ",
++      "EINT[6]    ",
++      "EINT[7]    ",
++};
++static const char * funcs_f3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++};
++
++
++static const char * funcs_g2[] = {
++      "EINT[8]    ",
++      "EINT[9]    ",
++      "EINT[10]   ",
++      "EINT[11]   ",
++      "EINT[12]   ",
++      "EINT[13]   ",
++      "EINT[14]   ",
++      "EINT[15]   ",
++      "EINT[16]   ",
++      "EINT[17]   ",
++      "EINT[18]   ",
++      "EINT[19]   ",
++      "EINT[20]   ",
++      "EINT[21]   ",
++      "EINT[22]   ",
++      "EINT[23]   ",
++};
++static const char * funcs_g3[] = {
++      NULL,
++      NULL,
++      "nSS0       ",
++      "nSS1       ",
++      "LCD_PWRDN  ",
++      "SPIMISO1   ",
++      "SPIMOSI1   ",
++      "SPICLK1    ",
++      NULL,
++      "nRTS1      ",
++      "nCTS1      ",
++      "TCLK[1]    ",
++      "nSPICS0    ",
++      NULL,
++      NULL,
++      NULL,
++};
++
++static const char * funcs_h2[] = {
++      "nCTS0      ",
++      "nRTS0      ",
++      "TXD[0]     ",
++      "RXD[0]     ",
++      "TXD[1]     ",
++      "RXD[1]     ",
++      "TXD[2]     ",
++      "RXD[2]     ",
++      "UEXTCLK    ",
++      "CLKOUT0    ",
++      "CLKOUT1    ",
++};
++static const char * funcs_h3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      "nRTS1      ",
++      "nCTS1      ",
++      NULL,
++      "nSPICS0    ",
++      NULL,
++};
++
++static const char * funcs_j2[] = {
++      "CAMDATA[0] ",
++      "CAMDATA[1] ",
++      "CAMDATA[2] ",
++      "CAMDATA[3] ",
++      "CAMDATA[4] ",
++      "CAMDATA[5] ",
++      "CAMDATA[6] ",
++      "CAMDATA[7] ",
++      "CAMPCLK    ",
++      "CAMVSYNC   ",
++      "CAMHREF    ",
++      "CAMCLKOUT  ",
++      "CAMRESET   ",
++};
++static const char * funcs_j3[] = {
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++      NULL,
++};
++
++/* used to dump GPIO states at suspend */
++void s3c24xx_dump_gpio_states(void)
++{
++      pretty_dump_a(__raw_readl(S3C2410_GPACON),
++                    __raw_readl(S3C2410_GPADAT),
++                    funcs_a, "GPA", 25);
++      pretty_dump(__raw_readl(S3C2410_GPBCON),
++                  __raw_readl(S3C2410_GPBDAT),
++                  __raw_readl(S3C2410_GPBUP),
++                  funcs_b2, funcs_b3, "GPB", 11);
++      pretty_dump(__raw_readl(S3C2410_GPCCON),
++                  __raw_readl(S3C2410_GPCDAT),
++                  __raw_readl(S3C2410_GPCUP),
++                  funcs_c2, funcs_c3, "GPC", 16);
++      pretty_dump(__raw_readl(S3C2410_GPDCON),
++                  __raw_readl(S3C2410_GPDDAT),
++                  __raw_readl(S3C2410_GPDUP),
++                  funcs_d2, funcs_d3, "GPD", 16);
++      pretty_dump(__raw_readl(S3C2410_GPECON),
++                  __raw_readl(S3C2410_GPEDAT),
++                  __raw_readl(S3C2410_GPEUP),
++                  funcs_e2, funcs_e3, "GPE", 16);
++      pretty_dump(__raw_readl(S3C2410_GPFCON),
++                  __raw_readl(S3C2410_GPFDAT),
++                  __raw_readl(S3C2410_GPFUP),
++                  funcs_f2, funcs_f3, "GPF", 8);
++      pretty_dump(__raw_readl(S3C2410_GPGCON),
++                  __raw_readl(S3C2410_GPGDAT),
++                  __raw_readl(S3C2410_GPGUP),
++                  funcs_g2, funcs_g3, "GPG", 16);
++      pretty_dump(__raw_readl(S3C2410_GPHCON),
++                  __raw_readl(S3C2410_GPHDAT),
++                  __raw_readl(S3C2410_GPHUP),
++                  funcs_h2, funcs_h3, "GPH", 11);
++      pretty_dump(__raw_readl(S3C2440_GPJCON),
++                  __raw_readl(S3C2440_GPJDAT),
++                  __raw_readl(S3C2440_GPJUP),
++                  funcs_j2, funcs_j3, "GPJ", 13);
++
++}
++EXPORT_SYMBOL(s3c24xx_dump_gpio_states);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gpiolib.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gpiolib.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gpiolib.c      2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gpiolib.c   2009-05-10 22:27:59.000000000 +0200
+@@ -22,6 +22,7 @@
+ #include <plat/gpio-core.h>
+ #include <mach/hardware.h>
+ #include <asm/irq.h>
++#include <plat/pm.h>
+ #include <mach/regs-gpio.h>
+@@ -78,6 +79,7 @@
+ struct s3c_gpio_chip s3c24xx_gpios[] = {
+       [0] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPA0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_1bit),
+               .chip   = {
+                       .base                   = S3C2410_GPA0,
+                       .owner                  = THIS_MODULE,
+@@ -89,6 +91,7 @@
+       },
+       [1] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPB0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPB0,
+                       .owner                  = THIS_MODULE,
+@@ -98,6 +101,7 @@
+       },
+       [2] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPC0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPC0,
+                       .owner                  = THIS_MODULE,
+@@ -107,6 +111,7 @@
+       },
+       [3] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPD0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPD0,
+                       .owner                  = THIS_MODULE,
+@@ -116,6 +121,7 @@
+       },
+       [4] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPE0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPE0,
+                       .label                  = "GPIOE",
+@@ -125,6 +131,7 @@
+       },
+       [5] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPF0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPF0,
+                       .owner                  = THIS_MODULE,
+@@ -135,12 +142,23 @@
+       },
+       [6] = {
+               .base   = S3C24XX_GPIO_BASE(S3C2410_GPG0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
+               .chip   = {
+                       .base                   = S3C2410_GPG0,
+                       .owner                  = THIS_MODULE,
+                       .label                  = "GPIOG",
+-                      .ngpio                  = 10,
+                       .to_irq                 = s3c24xx_gpiolib_bankg_toirq,
++                      .ngpio                  = 16,
++              },
++      },
++      [7] = {
++              .base   = S3C24XX_GPIO_BASE(S3C2410_GPH0),
++              .pm     = __gpio_pm(&s3c_gpio_pm_2bit),
++              .chip   = {
++                      .base                   = S3C2410_GPH0,
++                      .owner                  = THIS_MODULE,
++                      .label                  = "GPIOH",
++                      .ngpio                  = 11,
+               },
+       },
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gta02_pm_wlan.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gta02_pm_wlan.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/gta02_pm_wlan.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/gta02_pm_wlan.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,222 @@
++/*
++ * GTA02 WLAN power management
++ *
++ * (C) 2008, 2009 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/mutex.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++#include <mach/gta02.h>
++#include <mach/gta02-pm-wlan.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++
++#include <linux/delay.h>
++#include <linux/rfkill.h>
++
++
++/* ----- Module hardware reset ("power") ----------------------------------- */
++
++
++void gta02_wlan_reset(int assert_reset)
++{
++      if (assert_reset) {
++              s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
++              msleep(200); /* probably excessive but we don't have specs */
++      } else {
++              s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
++      }
++}
++
++#ifdef CONFIG_PM
++static int gta02_wlan_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      dev_dbg(&pdev->dev, "suspending\n");
++
++      return 0;
++}
++
++static int gta02_wlan_resume(struct platform_device *pdev)
++{
++      dev_dbg(&pdev->dev, "resuming\n");
++
++      return 0;
++}
++#else
++#define gta02_wlan_suspend    NULL
++#define gta02_wlan_resume             NULL
++#endif
++
++
++/* ----- rfkill ------------------------------------------------------------ */
++
++/*
++ * S3C MCI handles suspend/resume through device removal/insertion. In order to
++ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
++ * we therefore need to maintain rfkill state outside the driver.
++ *
++ * This platform driver is as good a place as any other.
++ */
++
++static int (*gta02_wlan_rfkill_cb)(void *user, int on);
++static void *gta02_wlan_rfkill_user;
++static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
++static int gta02_wlan_rfkill_on;
++
++
++/*
++ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
++ * driver is ready to process rfkill callbacks. To prevent the state from
++ * changing until the driver has completed its initialization, we grab and hold
++ * the rfkill lock.
++ *
++ * A call to gta02_wlan_query_rfkill_lock must be followed by either
++ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
++ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
++ */
++
++int gta02_wlan_query_rfkill_lock(void)
++{
++      mutex_lock(&gta02_wlan_rfkill_lock);
++      return gta02_wlan_rfkill_on;
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
++
++void gta02_wlan_query_rfkill_unlock(void)
++{
++      mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
++
++
++void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
++{
++      BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
++      BUG_ON(gta02_wlan_rfkill_cb);
++      gta02_wlan_rfkill_cb = cb;
++      gta02_wlan_rfkill_user = user;
++      mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
++
++void gta02_wlan_clear_rfkill_cb(void)
++{
++      mutex_lock(&gta02_wlan_rfkill_lock);
++      BUG_ON(!gta02_wlan_rfkill_cb);
++      gta02_wlan_rfkill_cb = NULL;
++      mutex_unlock(&gta02_wlan_rfkill_lock);
++}
++EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
++
++static int gta02_wlan_toggle_radio(void *data, enum rfkill_state state)
++{
++      struct device *dev = data;
++      int on = state == RFKILL_STATE_UNBLOCKED;
++      int res = 0;
++
++      dev_dbg(dev, "gta02_wlan_toggle_radio: state %d (%p)\n",
++          state, gta02_wlan_rfkill_cb);
++      mutex_lock(&gta02_wlan_rfkill_lock);
++      if (gta02_wlan_rfkill_cb)
++              res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, on);
++      if (!res)
++              gta02_wlan_rfkill_on = on;
++      mutex_unlock(&gta02_wlan_rfkill_lock);
++      return res;
++}
++
++
++/* ----- Initialization/removal -------------------------------------------- */
++
++
++static int __init gta02_wlan_probe(struct platform_device *pdev)
++{
++      /* default-on for now */
++      const int default_state = 1;
++      struct rfkill *rfkill;
++      int error;
++
++      if (!machine_is_neo1973_gta02())
++              return -EINVAL;
++
++      dev_info(&pdev->dev, "starting\n");
++
++      s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
++      gta02_wlan_reset(1);
++      gta02_wlan_reset(0);
++
++      rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_WLAN);
++      rfkill->name = "ar6000";
++      rfkill->data = &pdev->dev;
++      rfkill->state = default_state ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
++      /*
++       * If the WLAN driver somehow managed to get activated before we're
++       * ready, the driver is now in an unknown state, which isn't something
++       * we're prepared to handle. This can't happen, so just fail hard.
++       */
++      BUG_ON(gta02_wlan_rfkill_cb);
++      gta02_wlan_rfkill_on = default_state;
++      rfkill->toggle_radio = gta02_wlan_toggle_radio;
++
++      error = rfkill_register(rfkill);
++      if (error) {
++              rfkill_free(rfkill);
++              return error;
++      }
++
++      dev_set_drvdata(&pdev->dev, rfkill);
++
++      return 0;
++}
++
++static int gta02_wlan_remove(struct platform_device *pdev)
++{
++      struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
++
++      rfkill_unregister(rfkill);
++      rfkill_free(rfkill);
++
++      return 0;
++}
++
++static struct platform_driver gta02_wlan_driver = {
++      .probe          = gta02_wlan_probe,
++      .remove         = gta02_wlan_remove,
++      .suspend        = gta02_wlan_suspend,
++      .resume         = gta02_wlan_resume,
++      .driver         = {
++              .name           = "gta02-pm-wlan",
++      },
++};
++
++static int __devinit gta02_wlan_init(void)
++{
++      return platform_driver_register(&gta02_wlan_driver);
++}
++
++static void gta02_wlan_exit(void)
++{
++      platform_driver_unregister(&gta02_wlan_driver);
++}
++
++module_init(gta02_wlan_init);
++module_exit(gta02_wlan_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/dma.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/dma.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/dma.h     2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/dma.h  1970-01-01 01:00:00.000000000 +0100
+@@ -1,82 +0,0 @@
+-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+- *
+- * Copyright (C) 2006 Simtec Electronics
+- *    Ben Dooks <ben@simtec.co.uk>
+- *
+- * Samsung S3C24XX DMA support
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+-*/
+-
+-extern struct sysdev_class dma_sysclass;
+-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+-
+-#define DMA_CH_VALID          (1<<31)
+-#define DMA_CH_NEVER          (1<<30)
+-
+-struct s3c24xx_dma_addr {
+-      unsigned long           from;
+-      unsigned long           to;
+-};
+-
+-/* struct s3c24xx_dma_map
+- *
+- * this holds the mapping information for the channel selected
+- * to be connected to the specified device
+-*/
+-
+-struct s3c24xx_dma_map {
+-      const char              *name;
+-      struct s3c24xx_dma_addr  hw_addr;
+-
+-      unsigned long            channels[S3C2410_DMA_CHANNELS];
+-      unsigned long            channels_rx[S3C2410_DMA_CHANNELS];
+-};
+-
+-struct s3c24xx_dma_selection {
+-      struct s3c24xx_dma_map  *map;
+-      unsigned long            map_size;
+-      unsigned long            dcon_mask;
+-
+-      void    (*select)(struct s3c2410_dma_chan *chan,
+-                        struct s3c24xx_dma_map *map);
+-
+-      void    (*direction)(struct s3c2410_dma_chan *chan,
+-                           struct s3c24xx_dma_map *map,
+-                           enum s3c2410_dmasrc dir);
+-};
+-
+-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+-
+-/* struct s3c24xx_dma_order_ch
+- *
+- * channel map for one of the `enum dma_ch` dma channels. the list
+- * entry contains a set of low-level channel numbers, orred with
+- * DMA_CH_VALID, which are checked in the order in the array.
+-*/
+-
+-struct s3c24xx_dma_order_ch {
+-      unsigned int    list[S3C2410_DMA_CHANNELS];     /* list of channels */
+-      unsigned int    flags;                          /* flags */
+-};
+-
+-/* struct s3c24xx_dma_order
+- *
+- * information provided by either the core or the board to give the
+- * dma system a hint on how to allocate channels
+-*/
+-
+-struct s3c24xx_dma_order {
+-      struct s3c24xx_dma_order_ch     channels[DMACH_MAX];
+-};
+-
+-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+-
+-/* DMA init code, called from the cpu support code */
+-
+-extern int s3c2410_dma_init(void);
+-
+-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+-                          unsigned int stride);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/dma-plat.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/dma-plat.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/dma-plat.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,84 @@
++/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
++ *
++ * Copyright (C) 2006 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C24XX DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <plat/dma-core.h>
++
++extern struct sysdev_class dma_sysclass;
++extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
++
++#define DMA_CH_VALID          (1<<31)
++#define DMA_CH_NEVER          (1<<30)
++
++struct s3c24xx_dma_addr {
++      unsigned long           from;
++      unsigned long           to;
++};
++
++/* struct s3c24xx_dma_map
++ *
++ * this holds the mapping information for the channel selected
++ * to be connected to the specified device
++*/
++
++struct s3c24xx_dma_map {
++      const char              *name;
++      struct s3c24xx_dma_addr  hw_addr;
++
++      unsigned long            channels[S3C_DMA_CHANNELS];
++      unsigned long            channels_rx[S3C_DMA_CHANNELS];
++};
++
++struct s3c24xx_dma_selection {
++      struct s3c24xx_dma_map  *map;
++      unsigned long            map_size;
++      unsigned long            dcon_mask;
++
++      void    (*select)(struct s3c2410_dma_chan *chan,
++                        struct s3c24xx_dma_map *map);
++
++      void    (*direction)(struct s3c2410_dma_chan *chan,
++                           struct s3c24xx_dma_map *map,
++                           enum s3c2410_dmasrc dir);
++};
++
++extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
++
++/* struct s3c24xx_dma_order_ch
++ *
++ * channel map for one of the `enum dma_ch` dma channels. the list
++ * entry contains a set of low-level channel numbers, orred with
++ * DMA_CH_VALID, which are checked in the order in the array.
++*/
++
++struct s3c24xx_dma_order_ch {
++      unsigned int    list[S3C_DMA_CHANNELS]; /* list of channels */
++      unsigned int    flags;                          /* flags */
++};
++
++/* struct s3c24xx_dma_order
++ *
++ * information provided by either the core or the board to give the
++ * dma system a hint on how to allocate channels
++*/
++
++struct s3c24xx_dma_order {
++      struct s3c24xx_dma_order_ch     channels[DMACH_MAX];
++};
++
++extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
++
++/* DMA init code, called from the cpu support code */
++
++extern int s3c2410_dma_init(void);
++
++extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
++                          unsigned int stride);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/irq.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/irq.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/irq.h     2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/irq.h  2009-05-10 22:27:59.000000000 +0200
+@@ -10,6 +10,13 @@
+  * published by the Free Software Foundation.
+ */
++#include <linux/io.h>
++
++#include <mach/irqs.h>
++#include <mach/hardware.h>
++#include <mach/regs-irq.h>
++#include <mach/regs-gpio.h>
++
+ #define irqdbf(x...)
+ #define irqdbf2(x...)
+@@ -25,8 +32,15 @@
+ {
+       unsigned long mask;
+       unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++      unsigned long flags;
++#endif
+       submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_save_flags(flags);
++      local_fiq_disable();
++#endif
+       mask = __raw_readl(S3C2410_INTMSK);
+       submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -39,6 +53,9 @@
+       /* write back masks */
+       __raw_writel(submask, S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_irq_restore(flags);
++#endif
+ }
+@@ -47,8 +64,15 @@
+ {
+       unsigned long mask;
+       unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++      unsigned long flags;
++#endif
+       submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_save_flags(flags);
++      local_fiq_disable();
++#endif
+       mask = __raw_readl(S3C2410_INTMSK);
+       submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -57,6 +81,9 @@
+       /* write back masks */
+       __raw_writel(submask, S3C2410_INTSUBMSK);
+       __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_irq_restore(flags);
++#endif
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/map.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/map.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/map.h     2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/map.h  2009-05-10 22:27:59.000000000 +0200
+@@ -31,6 +31,8 @@
+ #define S3C24XX_SZ_UART          SZ_1M
+ #define S3C_UART_OFFSET          (0x4000)
++#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
++
+ /* Timers */
+ #define S3C24XX_VA_TIMER   S3C_VA_TIMER
+ #define S3C2410_PA_TIMER   (0x51000000)
+@@ -56,7 +58,6 @@
+ #define S3C24XX_SZ_SPI                SZ_1M
+ #define S3C24XX_SZ_SDI                SZ_1M
+ #define S3C24XX_SZ_NAND               SZ_1M
+-#define S3C24XX_SZ_USBHOST    SZ_1M
+ /* GPIO ports */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/pm-core.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/pm-core.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/pm-core.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,64 @@
++/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
++ *
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++static inline void s3c_pm_debug_init_uart(void)
++{
++      unsigned long tmp = __raw_readl(S3C2410_CLKCON);
++
++      /* re-start uart clocks */
++      tmp |= S3C2410_CLKCON_UART0;
++      tmp |= S3C2410_CLKCON_UART1;
++      tmp |= S3C2410_CLKCON_UART2;
++
++      __raw_writel(tmp, S3C2410_CLKCON);
++      udelay(10);
++}
++
++static inline void s3c_pm_arch_prepare_irqs(void)
++{
++      __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
++      __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
++
++      /* ack any outstanding external interrupts before we go to sleep */
++
++      __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
++      __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
++      __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
++
++}
++
++static inline void s3c_pm_arch_stop_clocks(void)
++{
++      __raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
++}
++
++static void s3c_pm_show_resume_irqs(int start, unsigned long which,
++                                  unsigned long mask);
++
++static inline void s3c_pm_arch_show_resume_irqs(void)
++{
++      S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
++                __raw_readl(S3C2410_SRCPND),
++                __raw_readl(S3C2410_EINTPEND));
++
++      s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
++                              s3c_irqwake_intmask);
++
++      s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
++                              s3c_irqwake_eintmask);
++}
++
++static inline void s3c_pm_arch_update_uart(void __iomem *regs,
++                                         struct pm_uart_save *save)
++{
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/pm.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/pm.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/pm.h      2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/pm.h   1970-01-01 01:00:00.000000000 +0100
+@@ -1,73 +0,0 @@
+-/* linux/include/asm-arm/plat-s3c24xx/pm.h
+- *
+- * Copyright (c) 2004 Simtec Electronics
+- *    Written by Ben Dooks, <ben@simtec.co.uk>
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+-*/
+-
+-/* s3c2410_pm_init
+- *
+- * called from board at initialisation time to setup the power
+- * management
+-*/
+-
+-#ifdef CONFIG_PM
+-
+-extern __init int s3c2410_pm_init(void);
+-
+-#else
+-
+-static inline int s3c2410_pm_init(void)
+-{
+-      return 0;
+-}
+-#endif
+-
+-/* configuration for the IRQ mask over sleep */
+-extern unsigned long s3c_irqwake_intmask;
+-extern unsigned long s3c_irqwake_eintmask;
+-
+-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+-extern unsigned long s3c_irqwake_intallow;
+-extern unsigned long s3c_irqwake_eintallow;
+-
+-/* per-cpu sleep functions */
+-
+-extern void (*pm_cpu_prep)(void);
+-extern void (*pm_cpu_sleep)(void);
+-
+-/* Flags for PM Control */
+-
+-extern unsigned long s3c_pm_flags;
+-
+-/* from sleep.S */
+-
+-extern int  s3c2410_cpu_save(unsigned long *saveblk);
+-extern void s3c2410_cpu_suspend(void);
+-extern void s3c2410_cpu_resume(void);
+-
+-extern unsigned long s3c2410_sleep_save_phys;
+-
+-/* sleep save info */
+-
+-struct sleep_save {
+-      void __iomem    *reg;
+-      unsigned long   val;
+-};
+-
+-#define SAVE_ITEM(x) \
+-      { .reg = (x) }
+-
+-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+-
+-#ifdef CONFIG_PM
+-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+-extern int s3c24xx_irq_resume(struct sys_device *dev);
+-#else
+-#define s3c24xx_irq_suspend NULL
+-#define s3c24xx_irq_resume  NULL
+-#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/regs-dma.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/regs-dma.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/regs-dma.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,145 @@
++/* arch/arm/mach-s3c2410/include/mach/dma.h
++ *
++ * Copyright (C) 2003,2004,2006 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * Samsung S3C24XX DMA support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++/* DMA Register definitions */
++
++#define S3C2410_DMA_DISRC             (0x00)
++#define S3C2410_DMA_DISRCC            (0x04)
++#define S3C2410_DMA_DIDST             (0x08)
++#define S3C2410_DMA_DIDSTC            (0x0C)
++#define S3C2410_DMA_DCON              (0x10)
++#define S3C2410_DMA_DSTAT             (0x14)
++#define S3C2410_DMA_DCSRC             (0x18)
++#define S3C2410_DMA_DCDST             (0x1C)
++#define S3C2410_DMA_DMASKTRIG         (0x20)
++#define S3C2412_DMA_DMAREQSEL         (0x24)
++#define S3C2443_DMA_DMAREQSEL         (0x24)
++
++#define S3C2410_DISRCC_INC            (1<<0)
++#define S3C2410_DISRCC_APB            (1<<1)
++
++#define S3C2410_DMASKTRIG_STOP                (1<<2)
++#define S3C2410_DMASKTRIG_ON          (1<<1)
++#define S3C2410_DMASKTRIG_SWTRIG      (1<<0)
++
++#define S3C2410_DCON_DEMAND           (0<<31)
++#define S3C2410_DCON_HANDSHAKE                (1<<31)
++#define S3C2410_DCON_SYNC_PCLK                (0<<30)
++#define S3C2410_DCON_SYNC_HCLK                (1<<30)
++
++#define S3C2410_DCON_INTREQ           (1<<29)
++
++#define S3C2410_DCON_CH0_XDREQ0               (0<<24)
++#define S3C2410_DCON_CH0_UART0                (1<<24)
++#define S3C2410_DCON_CH0_SDI          (2<<24)
++#define S3C2410_DCON_CH0_TIMER                (3<<24)
++#define S3C2410_DCON_CH0_USBEP1               (4<<24)
++
++#define S3C2410_DCON_CH1_XDREQ1               (0<<24)
++#define S3C2410_DCON_CH1_UART1                (1<<24)
++#define S3C2410_DCON_CH1_I2SSDI               (2<<24)
++#define S3C2410_DCON_CH1_SPI          (3<<24)
++#define S3C2410_DCON_CH1_USBEP2               (4<<24)
++
++#define S3C2410_DCON_CH2_I2SSDO               (0<<24)
++#define S3C2410_DCON_CH2_I2SSDI               (1<<24)
++#define S3C2410_DCON_CH2_SDI          (2<<24)
++#define S3C2410_DCON_CH2_TIMER                (3<<24)
++#define S3C2410_DCON_CH2_USBEP3               (4<<24)
++
++#define S3C2410_DCON_CH3_UART2                (0<<24)
++#define S3C2410_DCON_CH3_SDI          (1<<24)
++#define S3C2410_DCON_CH3_SPI          (2<<24)
++#define S3C2410_DCON_CH3_TIMER                (3<<24)
++#define S3C2410_DCON_CH3_USBEP4               (4<<24)
++
++#define S3C2410_DCON_SRCSHIFT         (24)
++#define S3C2410_DCON_SRCMASK          (7<<24)
++
++#define S3C2410_DCON_BYTE             (0<<20)
++#define S3C2410_DCON_HALFWORD         (1<<20)
++#define S3C2410_DCON_WORD             (2<<20)
++
++#define S3C2410_DCON_AUTORELOAD               (0<<22)
++#define S3C2410_DCON_NORELOAD         (1<<22)
++#define S3C2410_DCON_HWTRIG           (1<<23)
++
++#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
++#define S3C2440_DIDSTC_CHKINT         (1<<2)
++
++#define S3C2440_DCON_CH0_I2SSDO               (5<<24)
++#define S3C2440_DCON_CH0_PCMIN                (6<<24)
++
++#define S3C2440_DCON_CH1_PCMOUT               (5<<24)
++#define S3C2440_DCON_CH1_SDI          (6<<24)
++
++#define S3C2440_DCON_CH2_PCMIN                (5<<24)
++#define S3C2440_DCON_CH2_MICIN                (6<<24)
++
++#define S3C2440_DCON_CH3_MICIN                (5<<24)
++#define S3C2440_DCON_CH3_PCMOUT               (6<<24)
++#endif
++
++#ifdef CONFIG_CPU_S3C2412
++
++#define S3C2412_DMAREQSEL_SRC(x)      ((x)<<1)
++
++#define S3C2412_DMAREQSEL_HW          (1)
++
++#define S3C2412_DMAREQSEL_SPI0TX      S3C2412_DMAREQSEL_SRC(0)
++#define S3C2412_DMAREQSEL_SPI0RX      S3C2412_DMAREQSEL_SRC(1)
++#define S3C2412_DMAREQSEL_SPI1TX      S3C2412_DMAREQSEL_SRC(2)
++#define S3C2412_DMAREQSEL_SPI1RX      S3C2412_DMAREQSEL_SRC(3)
++#define S3C2412_DMAREQSEL_I2STX               S3C2412_DMAREQSEL_SRC(4)
++#define S3C2412_DMAREQSEL_I2SRX               S3C2412_DMAREQSEL_SRC(5)
++#define S3C2412_DMAREQSEL_TIMER               S3C2412_DMAREQSEL_SRC(9)
++#define S3C2412_DMAREQSEL_SDI         S3C2412_DMAREQSEL_SRC(10)
++#define S3C2412_DMAREQSEL_USBEP1      S3C2412_DMAREQSEL_SRC(13)
++#define S3C2412_DMAREQSEL_USBEP2      S3C2412_DMAREQSEL_SRC(14)
++#define S3C2412_DMAREQSEL_USBEP3      S3C2412_DMAREQSEL_SRC(15)
++#define S3C2412_DMAREQSEL_USBEP4      S3C2412_DMAREQSEL_SRC(16)
++#define S3C2412_DMAREQSEL_XDREQ0      S3C2412_DMAREQSEL_SRC(17)
++#define S3C2412_DMAREQSEL_XDREQ1      S3C2412_DMAREQSEL_SRC(18)
++#define S3C2412_DMAREQSEL_UART0_0     S3C2412_DMAREQSEL_SRC(19)
++#define S3C2412_DMAREQSEL_UART0_1     S3C2412_DMAREQSEL_SRC(20)
++#define S3C2412_DMAREQSEL_UART1_0     S3C2412_DMAREQSEL_SRC(21)
++#define S3C2412_DMAREQSEL_UART1_1     S3C2412_DMAREQSEL_SRC(22)
++#define S3C2412_DMAREQSEL_UART2_0     S3C2412_DMAREQSEL_SRC(23)
++#define S3C2412_DMAREQSEL_UART2_1     S3C2412_DMAREQSEL_SRC(24)
++
++#endif
++
++#define S3C2443_DMAREQSEL_SRC(x)      ((x)<<1)
++
++#define S3C2443_DMAREQSEL_HW          (1)
++
++#define S3C2443_DMAREQSEL_SPI0TX      S3C2443_DMAREQSEL_SRC(0)
++#define S3C2443_DMAREQSEL_SPI0RX      S3C2443_DMAREQSEL_SRC(1)
++#define S3C2443_DMAREQSEL_SPI1TX      S3C2443_DMAREQSEL_SRC(2)
++#define S3C2443_DMAREQSEL_SPI1RX      S3C2443_DMAREQSEL_SRC(3)
++#define S3C2443_DMAREQSEL_I2STX               S3C2443_DMAREQSEL_SRC(4)
++#define S3C2443_DMAREQSEL_I2SRX               S3C2443_DMAREQSEL_SRC(5)
++#define S3C2443_DMAREQSEL_TIMER               S3C2443_DMAREQSEL_SRC(9)
++#define S3C2443_DMAREQSEL_SDI         S3C2443_DMAREQSEL_SRC(10)
++#define S3C2443_DMAREQSEL_XDREQ0      S3C2443_DMAREQSEL_SRC(17)
++#define S3C2443_DMAREQSEL_XDREQ1      S3C2443_DMAREQSEL_SRC(18)
++#define S3C2443_DMAREQSEL_UART0_0     S3C2443_DMAREQSEL_SRC(19)
++#define S3C2443_DMAREQSEL_UART0_1     S3C2443_DMAREQSEL_SRC(20)
++#define S3C2443_DMAREQSEL_UART1_0     S3C2443_DMAREQSEL_SRC(21)
++#define S3C2443_DMAREQSEL_UART1_1     S3C2443_DMAREQSEL_SRC(22)
++#define S3C2443_DMAREQSEL_UART2_0     S3C2443_DMAREQSEL_SRC(23)
++#define S3C2443_DMAREQSEL_UART2_1     S3C2443_DMAREQSEL_SRC(24)
++#define S3C2443_DMAREQSEL_UART3_0     S3C2443_DMAREQSEL_SRC(25)
++#define S3C2443_DMAREQSEL_UART3_1     S3C2443_DMAREQSEL_SRC(26)
++#define S3C2443_DMAREQSEL_PCMOUT      S3C2443_DMAREQSEL_SRC(27)
++#define S3C2443_DMAREQSEL_PCMIN       S3C2443_DMAREQSEL_SRC(28)
++#define S3C2443_DMAREQSEL_MICIN               S3C2443_DMAREQSEL_SRC(29)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/regs-iis.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/include/plat/regs-iis.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/include/plat/regs-iis.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,77 @@
++/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
++ *
++ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
++ *                  http://www.simtec.co.uk/products/SWLINUX/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * S3C2410 IIS register definition
++*/
++
++#ifndef __ASM_ARCH_REGS_IIS_H
++#define __ASM_ARCH_REGS_IIS_H
++
++#define S3C2410_IISCON         (0x00)
++
++#define S3C2410_IISCON_LRINDEX          (1<<8)
++#define S3C2410_IISCON_TXFIFORDY  (1<<7)
++#define S3C2410_IISCON_RXFIFORDY  (1<<6)
++#define S3C2410_IISCON_TXDMAEN          (1<<5)
++#define S3C2410_IISCON_RXDMAEN          (1<<4)
++#define S3C2410_IISCON_TXIDLE   (1<<3)
++#define S3C2410_IISCON_RXIDLE   (1<<2)
++#define S3C2410_IISCON_PSCEN    (1<<1)
++#define S3C2410_IISCON_IISEN    (1<<0)
++
++#define S3C2410_IISMOD         (0x04)
++
++#define S3C2440_IISMOD_MPLL     (1<<9)
++#define S3C2410_IISMOD_SLAVE    (1<<8)
++#define S3C2410_IISMOD_NOXFER   (0<<6)
++#define S3C2410_IISMOD_RXMODE   (1<<6)
++#define S3C2410_IISMOD_TXMODE   (2<<6)
++#define S3C2410_IISMOD_TXRXMODE         (3<<6)
++#define S3C2410_IISMOD_LR_LLOW          (0<<5)
++#define S3C2410_IISMOD_LR_RLOW          (1<<5)
++#define S3C2410_IISMOD_IIS      (0<<4)
++#define S3C2410_IISMOD_MSB      (1<<4)
++#define S3C2410_IISMOD_8BIT     (0<<3)
++#define S3C2410_IISMOD_16BIT    (1<<3)
++#define S3C2410_IISMOD_BITMASK          (1<<3)
++#define S3C2410_IISMOD_256FS    (0<<2)
++#define S3C2410_IISMOD_384FS    (1<<2)
++#define S3C2410_IISMOD_16FS     (0<<0)
++#define S3C2410_IISMOD_32FS     (1<<0)
++#define S3C2410_IISMOD_48FS     (2<<0)
++#define S3C2410_IISMOD_FS_MASK          (3<<0)
++
++#define S3C2410_IISPSR                (0x08)
++#define S3C2410_IISPSR_INTMASK        (31<<5)
++#define S3C2410_IISPSR_INTSHIFT       (5)
++#define S3C2410_IISPSR_EXTMASK        (31<<0)
++#define S3C2410_IISPSR_EXTSHFIT       (0)
++
++#define S3C2410_IISFCON  (0x0c)
++
++#define S3C2410_IISFCON_TXDMA   (1<<15)
++#define S3C2410_IISFCON_RXDMA   (1<<14)
++#define S3C2410_IISFCON_TXENABLE  (1<<13)
++#define S3C2410_IISFCON_RXENABLE  (1<<12)
++#define S3C2410_IISFCON_TXMASK          (0x3f << 6)
++#define S3C2410_IISFCON_TXSHIFT         (6)
++#define S3C2410_IISFCON_RXMASK          (0x3f)
++#define S3C2410_IISFCON_RXSHIFT         (0)
++
++#define S3C2400_IISFCON_TXDMA     (1<<11)
++#define S3C2400_IISFCON_RXDMA     (1<<10)
++#define S3C2400_IISFCON_TXENABLE  (1<<9)
++#define S3C2400_IISFCON_RXENABLE  (1<<8)
++#define S3C2400_IISFCON_TXMASK          (0x07 << 4)
++#define S3C2400_IISFCON_TXSHIFT         (4)
++#define S3C2400_IISFCON_RXMASK          (0x07)
++#define S3C2400_IISFCON_RXSHIFT         (0)
++
++#define S3C2410_IISFIFO  (0x10)
++#endif /* __ASM_ARCH_REGS_IIS_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/irq.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/irq.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/irq.c  2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/irq.c       2009-05-10 22:27:59.000000000 +0200
+@@ -1,6 +1,6 @@
+ /* linux/arch/arm/plat-s3c24xx/irq.c
+  *
+- * Copyright (c) 2003,2004 Simtec Electronics
++ * Copyright (c) 2003,2004 Simtec Electronics 
+  *    Ben Dooks <ben@simtec.co.uk>
+  *
+  * This program is free software; you can redistribute it and/or modify
+@@ -16,38 +16,6 @@
+  * You should have received a copy of the GNU General Public License
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+- *
+- * Changelog:
+- *
+- *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
+- *                Fixed compile warnings
+- *
+- *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
+- *                Fixed s3c_extirq_type
+- *
+- *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
+- *                Addition of ADC/TC demux
+- *
+- *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
+- *              Fix for set_irq_type() on low EINT numbers
+- *
+- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+- *              Tidy up KF's patch and sort out new release
+- *
+- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+- *              Add support for power management controls
+- *
+- *   04-Nov-2004  Ben Dooks
+- *              Fix standard IRQ wake for EINT0..4 and RTC
+- *
+- *   22-Feb-2005  Ben Dooks
+- *              Fixed edge-triggering on ADC IRQ
+- *
+- *   28-Jun-2005  Ben Dooks
+- *              Mark IRQ_LCD valid
+- *
+- *   25-Jul-2005  Ben Dooks
+- *              Split the S3C2440 IRQ code to separate file
+ */
+ #include <linux/init.h>
+@@ -55,11 +23,8 @@
+ #include <linux/interrupt.h>
+ #include <linux/ioport.h>
+ #include <linux/sysdev.h>
+-#include <linux/io.h>
+-#include <mach/hardware.h>
+ #include <asm/irq.h>
+-
+ #include <asm/mach/irq.h>
+ #include <plat/regs-irqtype.h>
+@@ -70,76 +35,24 @@
+ #include <plat/pm.h>
+ #include <plat/irq.h>
+-/* wakeup irq control */
+-
+-#ifdef CONFIG_PM
+-
+-/* state for IRQs over sleep */
+-
+-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+- *
+- * set bit to 1 in allow bitfield to enable the wakeup settings on it
+-*/
+-
+-unsigned long s3c_irqwake_intallow    = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+-unsigned long s3c_irqwake_intmask     = 0xffffffffL;
+-unsigned long s3c_irqwake_eintallow   = 0x0000fff0L;
+-unsigned long s3c_irqwake_eintmask    = 0xffffffffL;
+-
+-int
+-s3c_irq_wake(unsigned int irqno, unsigned int state)
+-{
+-      unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+-
+-      if (!(s3c_irqwake_intallow & irqbit))
+-              return -ENOENT;
+-
+-      printk(KERN_INFO "wake %s for irq %d\n",
+-             state ? "enabled" : "disabled", irqno);
+-
+-      if (!state)
+-              s3c_irqwake_intmask |= irqbit;
+-      else
+-              s3c_irqwake_intmask &= ~irqbit;
+-
+-      return 0;
+-}
+-
+-static int
+-s3c_irqext_wake(unsigned int irqno, unsigned int state)
+-{
+-      unsigned long bit = 1L << (irqno - EXTINT_OFF);
+-
+-      if (!(s3c_irqwake_eintallow & bit))
+-              return -ENOENT;
+-
+-      printk(KERN_INFO "wake %s for irq %d\n",
+-             state ? "enabled" : "disabled", irqno);
+-
+-      if (!state)
+-              s3c_irqwake_eintmask |= bit;
+-      else
+-              s3c_irqwake_eintmask &= ~bit;
+-
+-      return 0;
+-}
+-
+-#else
+-#define s3c_irqext_wake NULL
+-#define s3c_irq_wake NULL
+-#endif
+-
+-
+ static void
+ s3c_irq_mask(unsigned int irqno)
+ {
+       unsigned long mask;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++      unsigned long flags;
++#endif
+       irqno -= IRQ_EINT0;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_save_flags(flags);
++      local_fiq_disable();
++#endif
+       mask = __raw_readl(S3C2410_INTMSK);
+       mask |= 1UL << irqno;
+       __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_irq_restore(flags);
++#endif
+ }
+ static inline void
+@@ -156,9 +69,19 @@
+ {
+       unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+       unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++      unsigned long flags;
++#endif
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_save_flags(flags);
++      local_fiq_disable();
++#endif
+       mask = __raw_readl(S3C2410_INTMSK);
+       __raw_writel(mask|bitval, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_irq_restore(flags);
++#endif
+       __raw_writel(bitval, S3C2410_SRCPND);
+       __raw_writel(bitval, S3C2410_INTPND);
+@@ -169,15 +92,25 @@
+ s3c_irq_unmask(unsigned int irqno)
+ {
+       unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++      unsigned long flags;
++#endif
+       if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+               irqdbf2("s3c_irq_unmask %d\n", irqno);
+       irqno -= IRQ_EINT0;
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_save_flags(flags);
++      local_fiq_disable();
++#endif
+       mask = __raw_readl(S3C2410_INTMSK);
+       mask &= ~(1UL << irqno);
+       __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++      local_irq_restore(flags);
++#endif
+ }
+ struct irq_chip s3c_irq_level_chip = {
+@@ -590,59 +523,6 @@
+       }
+ }
+-#ifdef CONFIG_PM
+-
+-static struct sleep_save irq_save[] = {
+-      SAVE_ITEM(S3C2410_INTMSK),
+-      SAVE_ITEM(S3C2410_INTSUBMSK),
+-};
+-
+-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+- * so we use an array to hold them, and to calculate the address of
+- * the register at run-time
+-*/
+-
+-static unsigned long save_extint[3];
+-static unsigned long save_eintflt[4];
+-static unsigned long save_eintmask;
+-
+-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+-{
+-      unsigned int i;
+-
+-      for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+-              save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+-
+-      for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+-              save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+-
+-      s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+-      save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+-
+-      return 0;
+-}
+-
+-int s3c24xx_irq_resume(struct sys_device *dev)
+-{
+-      unsigned int i;
+-
+-      for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+-              __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+-
+-      for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+-              __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+-
+-      s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+-      __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+-
+-      return 0;
+-}
+-
+-#else
+-#define s3c24xx_irq_suspend NULL
+-#define s3c24xx_irq_resume  NULL
+-#endif
+-
+ /* s3c24xx_init_irq
+  *
+  * Initialise S3C2410 IRQ system
+@@ -673,26 +553,26 @@
+       last = 0;
+       for (i = 0; i < 4; i++) {
+-              pend = __raw_readl(S3C2410_INTPND);
++              pend = __raw_readl(S3C2410_SUBSRCPND);
+               if (pend == 0 || pend == last)
+                       break;
+-              __raw_writel(pend, S3C2410_SRCPND);
+-              __raw_writel(pend, S3C2410_INTPND);
+-              printk("irq: clearing pending status %08x\n", (int)pend);
++              printk("irq: clearing subpending status %08x\n", (int)pend);
++              __raw_writel(pend, S3C2410_SUBSRCPND);
+               last = pend;
+       }
+       last = 0;
+       for (i = 0; i < 4; i++) {
+-              pend = __raw_readl(S3C2410_SUBSRCPND);
++              pend = __raw_readl(S3C2410_INTPND);
+               if (pend == 0 || pend == last)
+                       break;
+-              printk("irq: clearing subpending status %08x\n", (int)pend);
+-              __raw_writel(pend, S3C2410_SUBSRCPND);
++              __raw_writel(pend, S3C2410_SRCPND);
++              __raw_writel(pend, S3C2410_INTPND);
++              printk("irq: clearing pending status %08x\n", (int)pend);
+               last = pend;
+       }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/irq-pm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/irq-pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/irq-pm.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/irq-pm.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,118 @@
++/* linux/arch/arm/plat-s3c24xx/irq-om.c
++ *
++ * Copyright (c) 2003,2004 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C24XX - IRQ PM code
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/sysdev.h>
++#include <linux/irq.h>
++
++#include <plat/cpu.h>
++#include <plat/pm.h>
++#include <plat/irq.h>
++
++/* state for IRQs over sleep */
++
++/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
++ *
++ * set bit to 1 in allow bitfield to enable the wakeup settings on it
++*/
++
++unsigned long s3c_irqwake_intallow    = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
++unsigned long s3c_irqwake_eintallow   = 0x0000fff0L;
++
++int s3c_irq_wake(unsigned int irqno, unsigned int state)
++{
++      unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
++
++      if (!(s3c_irqwake_intallow & irqbit))
++              return -ENOENT;
++
++      printk(KERN_INFO "wake %s for irq %d\n",
++             state ? "enabled" : "disabled", irqno);
++
++      if (!state)
++              s3c_irqwake_intmask |= irqbit;
++      else
++              s3c_irqwake_intmask &= ~irqbit;
++
++      return 0;
++}
++
++static struct sleep_save irq_save[] = {
++      SAVE_ITEM(S3C2410_INTMSK),
++      SAVE_ITEM(S3C2410_INTSUBMSK),
++};
++
++/* the extint values move between the s3c2410/s3c2440 and the s3c2412
++ * so we use an array to hold them, and to calculate the address of
++ * the register at run-time
++*/
++
++static unsigned long save_extint[3];
++static unsigned long save_eintflt[4];
++static unsigned long save_eintmask;
++
++int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
++{
++      unsigned int i;
++
++      for (i = 0; i < ARRAY_SIZE(save_extint); i++)
++              save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
++
++      for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
++              save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
++
++      s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
++      save_eintmask = __raw_readl(S3C24XX_EINTMASK);
++
++      return 0;
++}
++
++int s3c24xx_irq_resume(struct sys_device *dev)
++{
++      unsigned int i, irq;
++      unsigned long eintpnd;
++      struct irq_desc *desc;
++
++      for (i = 0; i < ARRAY_SIZE(save_extint); i++)
++              __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
++
++      for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
++              __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
++
++      s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
++      __raw_writel(save_eintmask, S3C24XX_EINTMASK);
++
++      /*
++       * ACK those interrupts which are now masked and pending.
++       * Level interrupts if not ACKed here, create an interrupt storm
++       * because they are not handled at all.
++       */
++
++      eintpnd = __raw_readl(S3C24XX_EINTPEND);
++
++      eintpnd &= save_eintmask;
++      eintpnd &= ~0xff;       /* ignore lower irqs */
++
++      while (eintpnd) {
++              irq = __ffs(eintpnd);
++              eintpnd &= ~(1 << irq);
++
++              irq += (IRQ_EINT4 - 4);
++              desc = irq_to_desc(irq);
++              desc->chip->ack(irq);
++      }
++
++      return 0;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/Kconfig        2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -10,6 +10,7 @@
+       default y
+       select NO_IOPORT
+       select ARCH_REQUIRE_GPIOLIB
++      select S3C_GPIO_TRACK
+       help
+         Base platform code for any Samsung S3C24XX device
+@@ -30,7 +31,7 @@
+ config CPU_S3C244X
+       bool
+-      depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
++      default y if CPU_S3C2440 || CPU_S3C2442
+       help
+         Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+@@ -71,6 +72,7 @@
+ config S3C2410_DMA
+       bool "S3C2410 DMA support"
+       depends on ARCH_S3C2410
++      select S3C_DMA
+       help
+         S3C2410 DMA support. This is needed for drivers like sound which
+         use the S3C2410's DMA system to move data to and from the
+@@ -111,4 +113,12 @@
+       help
+         Common machine code for SMDK2410 and SMDK2440
++config MACH_NEO1973
++      bool
++      select RFKILL
++      select SERIAL_SAMSUNG
++      select SERIAL_SAMSUNG_CONSOLE
++      help
++        Common machine code for Neo1973 hardware
++
+ endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/Makefile       2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -27,6 +27,7 @@
+ obj-$(CONFIG_CPU_S3C244X)     += s3c244x-clock.o
+ obj-$(CONFIG_PM_SIMTEC)               += pm-simtec.o
+ obj-$(CONFIG_PM)              += pm.o
++obj-$(CONFIG_PM)              += irq-pm.o
+ obj-$(CONFIG_PM)              += sleep.o
+ obj-$(CONFIG_HAVE_PWM)                += pwm.o
+ obj-$(CONFIG_S3C2410_CLOCK)   += s3c2410-clock.o
+@@ -44,3 +45,9 @@
+ # machine common support
+ obj-$(CONFIG_MACH_SMDK)               += common-smdk.o
++obj-$(CONFIG_MACH_NEO1973)    += \
++                                   neo1973_pm_gsm.o \
++                                   neo1973_pm_gps.o \
++                                   neo1973_pm_bt.o  \
++                                   gta02_pm_wlan.o  \
++                                   neo1973_shadow.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_bt.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_bt.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_bt.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,339 @@
++/*
++ * Bluetooth PM code for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rfkill.h>
++#include <linux/err.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++/* For GTA01 */
++#include <mach/gta01.h>
++#include <linux/pcf50606.h>
++
++/* For GTA02 */
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/gpio.h>
++
++#include <linux/regulator/consumer.h>
++
++#define DRVMSG "FIC Neo1973 Bluetooth Power Management"
++
++struct gta01_pm_bt_data {
++      struct regulator *regulator;
++      struct rfkill *rfkill;
++      int pre_resume_state;
++};
++
++static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
++                     char *buf)
++{
++      int ret = 0;    
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++      if (!strcmp(attr->attr.name, "power_on")) {
++              if (machine_is_neo1973_gta01()) {
++                      ret = regulator_is_enabled(bt_data->regulator);
++              } else if (machine_is_neo1973_gta02()) {
++                      if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
++                              ret = 1;
++              }
++      } else if (!strcmp(attr->attr.name, "reset")) {
++              if (machine_is_neo1973_gta01()) {
++                      if (s3c2410_gpio_getpin(GTA01_GPIO_BT_EN) == 0)
++                              ret = 1;
++              } else if (machine_is_neo1973_gta02()) {
++                      if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
++                              ret = 1;
++              }
++      }
++
++      if (!ret) {
++              return strlcpy(buf, "0\n", 3);
++      } else {
++              return strlcpy(buf, "1\n", 3);
++      }
++}
++
++static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
++{
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++      dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
++
++      if (machine_is_neo1973_gta02()) {
++
++              bt_data = dev_get_drvdata(dev);
++
++              neo1973_gpb_setpin(GTA02_GPIO_BT_EN, !on);
++
++              if (on) {
++                      if (!regulator_is_enabled(bt_data->regulator))
++                              regulator_enable(bt_data->regulator);
++              } else {
++                      if (regulator_is_enabled(bt_data->regulator))
++                              regulator_disable(bt_data->regulator);
++              }
++
++              neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on);
++      }
++}
++
++
++static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
++{
++      struct device *dev = data;
++      unsigned long on = (state == RFKILL_STATE_ON);
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++      if (machine_is_neo1973_gta01()) {
++              /* if we are powering up, assert reset, then power,
++               * then release reset */
++              if (on) {
++                      neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
++                              if (!regulator_is_enabled(bt_data->regulator))
++                                      regulator_enable(bt_data->regulator);
++              } else {
++                      if (regulator_is_enabled(bt_data->regulator))
++                              regulator_disable(bt_data->regulator);
++              }
++              neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on);
++      } else if (machine_is_neo1973_gta02())
++              __gta02_pm_bt_toggle_radio(dev, on);
++
++      return 0;
++}
++
++static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      unsigned long on = simple_strtoul(buf, NULL, 10);
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(dev);
++
++      if (!strcmp(attr->attr.name, "power_on")) {
++              enum rfkill_state state = on ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
++              bt_rfkill_toggle_radio(dev, state);
++              bt_data->rfkill->state = state;
++
++              if (machine_is_neo1973_gta01()) {
++                      /* if we are powering up, assert reset, then power,
++                       * then release reset */
++                      if (on) {
++                              neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
++                              if (!regulator_is_enabled(bt_data->regulator))
++                                      regulator_enable(bt_data->regulator);
++                      } else {
++                              if (regulator_is_enabled(bt_data->regulator))
++                                      regulator_disable(bt_data->regulator);
++                      }
++
++                      neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on);
++              } else if (machine_is_neo1973_gta02())
++                      __gta02_pm_bt_toggle_radio(dev, on);
++
++      } else if (!strcmp(attr->attr.name, "reset")) {
++              /* reset is low-active, so we need to invert */
++              if (machine_is_neo1973_gta01()) {
++                      neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on ? 0 : 1);
++              } else if (machine_is_neo1973_gta02()) {
++                      neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
++              }
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
++static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
++
++#ifdef CONFIG_PM
++static int gta01_bt_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++
++      dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
++
++      if (machine_is_neo1973_gta01()) {
++              if (regulator_is_enabled(bt_data->regulator))
++                      regulator_disable(bt_data->regulator);
++      } else if (machine_is_neo1973_gta02()) {
++              bt_data->pre_resume_state =
++                                        s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
++              __gta02_pm_bt_toggle_radio(&pdev->dev, 0);
++      }
++
++      return 0;
++}
++
++static int gta01_bt_resume(struct platform_device *pdev)
++{
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++      dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
++
++      if (machine_is_neo1973_gta02()) {
++              __gta02_pm_bt_toggle_radio(&pdev->dev,
++                                                   bt_data->pre_resume_state);
++      }
++
++      return 0;
++}
++#else
++#define gta01_bt_suspend      NULL
++#define gta01_bt_resume               NULL
++#endif
++
++static struct attribute *gta01_bt_sysfs_entries[] = {
++      &dev_attr_power_on.attr,
++      &dev_attr_reset.attr,
++      NULL
++};
++
++static struct attribute_group gta01_bt_attr_group = {
++      .name   = NULL,
++      .attrs  = gta01_bt_sysfs_entries,
++};
++
++static int __init gta01_bt_probe(struct platform_device *pdev)
++{
++      struct rfkill *rfkill;
++      struct regulator *regulator;
++      struct gta01_pm_bt_data *bt_data;
++      int ret;
++
++      dev_info(&pdev->dev, DRVMSG ": starting\n");
++
++      bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
++      dev_set_drvdata(&pdev->dev, bt_data);
++
++      if (machine_is_neo1973_gta01()) {
++              /* we make sure that the voltage is off */
++              regulator = regulator_get(&pdev->dev, "BT_3V1");
++              if (IS_ERR(regulator))
++                      return -ENODEV;
++
++              bt_data->regulator = regulator;
++
++              /* this tests the true physical state of the regulator... */
++              if (regulator_is_enabled(regulator)) {
++                      /*
++                       * but these only operate on the logical state of the
++                       * regulator... so we need to logicaly "adopt" it on
++                       * to turn it off
++                       */
++                      regulator_enable(regulator);
++                      regulator_disable(regulator);
++              }
++
++              /* we pull reset to low to make sure that the chip doesn't
++               * drain power through the reset line */
++              neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
++      } else if (machine_is_neo1973_gta02()) {
++              regulator = regulator_get(&pdev->dev, "BT_3V2");
++              if (IS_ERR(regulator))
++                      return -ENODEV;
++
++              bt_data->regulator = regulator;
++
++              /* this tests the true physical state of the regulator... */
++              if (regulator_is_enabled(regulator)) {
++                      /*
++                       * but these only operate on the logical state of the
++                       * regulator... so we need to logicaly "adopt" it on
++                       * to turn it off
++                       */
++                      regulator_enable(regulator);
++                      regulator_disable(regulator);
++              }
++
++              /* we pull reset to low to make sure that the chip doesn't
++               * drain power through the reset line */
++              neo1973_gpb_setpin(GTA02_GPIO_BT_EN, 0);
++      }
++
++      rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_BLUETOOTH);
++
++      rfkill->name = pdev->name;
++      rfkill->data = &pdev->dev;
++      rfkill->state = RFKILL_STATE_OFF;
++      rfkill->toggle_radio = bt_rfkill_toggle_radio;
++
++      ret = rfkill_register(rfkill);
++      if (ret) {
++              dev_err(&pdev->dev, "Failed to register rfkill\n");
++              return ret;
++      }
++
++      bt_data->rfkill = rfkill;
++
++      return sysfs_create_group(&pdev->dev.kobj, &gta01_bt_attr_group);
++}
++
++static int gta01_bt_remove(struct platform_device *pdev)
++{
++      struct gta01_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
++      struct regulator *regulator;
++
++      sysfs_remove_group(&pdev->dev.kobj, &gta01_bt_attr_group);
++
++      if (bt_data->rfkill) {
++              rfkill_unregister(bt_data->rfkill);
++              rfkill_free(bt_data->rfkill);
++      }
++
++      if (!bt_data || !bt_data->regulator)
++              return 0;
++
++      regulator = bt_data->regulator;
++
++      /* Make sure regulator is disabled before calling regulator_put */
++      if (regulator_is_enabled(regulator))
++              regulator_disable(regulator);
++
++      regulator_put(regulator);
++
++      kfree(bt_data);
++      
++      return 0;
++}
++
++static struct platform_driver gta01_bt_driver = {
++      .probe          = gta01_bt_probe,
++      .remove         = gta01_bt_remove,
++      .suspend        = gta01_bt_suspend,
++      .resume         = gta01_bt_resume,
++      .driver         = {
++              .name           = "neo1973-pm-bt",
++      },
++};
++
++static int __devinit gta01_bt_init(void)
++{
++      return platform_driver_register(&gta01_bt_driver);
++}
++
++static void gta01_bt_exit(void)
++{
++      platform_driver_unregister(&gta01_bt_driver);
++}
++
++module_init(gta01_bt_init);
++module_exit(gta01_bt_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION(DRVMSG);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gps.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gps.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gps.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,803 @@
++/*
++ * GPS Power Management code for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007-2009 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <mach/cpu.h>
++
++#include <asm/mach-types.h>
++
++#include <asm/plat-s3c24xx/neo1973.h>
++
++/* For GTA01 */
++#include <mach/gta01.h>
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/gpo.h>
++
++/* For GTA02 */
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/mfd/pcf50633/pmic.h>
++
++#include <linux/regulator/consumer.h>
++#include <linux/err.h>
++
++enum gta01_pm_gps_supplies {
++
++      /* GTA01 */
++      GTA01_GPS_REG_2V8,
++      GTA01_GPS_REG_3V,
++      GTA01_GPS_REG_3V3,
++      GTA01_GPS_REG_1V5,
++      GTA01_GPS_REG_2V5,
++
++      /* GTA02 */
++      GTA02_GPS_REG_RF_3V,
++
++      /* Always last */
++      GTA01_GPS_NUM_REG
++};
++
++struct neo1973_pm_gps_data {
++#ifdef CONFIG_PM
++      int keep_on_in_suspend;
++#endif
++      int power_was_on; /* For GTA02 only */
++      int regulator_state[GTA01_GPS_NUM_REG];
++      struct regulator *regulator[GTA01_GPS_NUM_REG];
++};
++
++static struct neo1973_pm_gps_data neo1973_gps;
++
++int neo1973_pm_gps_is_on(void)
++{
++      return neo1973_gps.power_was_on;
++}
++EXPORT_SYMBOL_GPL(neo1973_pm_gps_is_on);
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++
++/* This is the 2.8V supply for the RTC crystal, the mail clock crystal and
++ * the input to VDD_RF */
++static void gps_power_2v8_set(int on)
++{
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_2V8];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++              if (on)
++                      regulator_enable(regulator);
++              else
++                      regulator_disable(regulator);
++              neo1973_gps.regulator_state[GTA01_GPS_REG_2V8] = on;
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++              s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_2V8, on);
++                      break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              break;
++      }
++}
++
++static int gps_power_2v8_get(void)
++{
++      int ret = 0;
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_2V8];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++                      ret = regulator_is_enabled(regulator);
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++              if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_2V8))
++                      ret = 1;
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              break;
++      }
++
++      return ret;
++}
++
++/* This is the 3V supply (AVDD) for the external RF frontend (LNA bias) */
++static void gps_power_3v_set(int on)
++{
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_3V];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++              if (on)
++                      regulator_enable(regulator);
++              else
++                      regulator_disable(regulator);
++              neo1973_gps.regulator_state[GTA01_GPS_REG_3V] = on;
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_3V, on);
++              break;
++      }
++}
++
++static int gps_power_3v_get(void)
++{
++      int ret = 0;
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_3V];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++              ret = regulator_is_enabled(regulator);
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_3V))
++                      ret = 1;
++              break;
++      }
++
++      return ret;
++}
++
++/* This is the 3.3V supply for VDD_IO and VDD_LPREG input */
++static void gps_power_3v3_set(int on)
++{
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_3V3];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              if (on)
++                      regulator_enable(regulator);
++              else
++                      regulator_disable(regulator);
++              neo1973_gps.regulator_state[GTA01_GPS_REG_3V3] = on;
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_3V3, on);
++              break;
++      }
++}
++
++static int gps_power_3v3_get(void)
++{
++      int ret = 0;
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_3V3];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              ret = regulator_is_enabled(regulator);
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_3V3))
++                      ret = 1;
++              break;
++      }
++
++      return ret;
++}
++
++/* This is the 2.5V supply for VDD_PLLREG and VDD_COREREG input */
++static void gps_power_2v5_set(int on)
++{
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_2V5];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              /* This is CORE_1V8 and cannot be disabled */
++              break;
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              if (on)
++                      regulator_enable(regulator);
++              else
++                      regulator_disable(regulator);
++              neo1973_gps.regulator_state[GTA01_GPS_REG_2V5] = on;
++              break;
++      }
++}
++
++static int gps_power_2v5_get(void)
++{
++      int ret = 0;
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_2V5];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              /* This is CORE_1V8 and cannot be disabled */
++              ret = 1;
++              break;
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              ret = regulator_is_enabled(regulator);
++              break;
++      }
++
++      return ret;
++}
++
++/* This is the 1.5V supply for VDD_CORE */
++static void gps_power_1v5_set(int on)
++{
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_1V5];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              /* This is switched via 2v5 */
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              if (on)
++                      regulator_enable(regulator);
++              else
++                      regulator_disable(regulator);
++              neo1973_gps.regulator_state[GTA01_GPS_REG_1V5] = on;
++              break;
++      }
++}
++
++static int gps_power_1v5_get(void)
++{
++      int ret = 0;
++      struct regulator *regulator = neo1973_gps.regulator[GTA01_GPS_REG_1V5];
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              /* This is switched via 2v5 */
++              ret = 1;
++              break;
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              ret = regulator_is_enabled(regulator);
++              break;
++      }
++
++      return ret;
++}
++#endif
++
++/* This is the POWERON pin */
++static void gps_pwron_set(int on)
++{
++
++      if (machine_is_neo1973_gta01())
++              neo1973_gpb_setpin(GTA01_GPIO_GPS_PWRON, on);
++
++      if (machine_is_neo1973_gta02()) {
++              if (on) {
++                      /* return UART pins to being UART pins */
++                      s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
++                      /* remove pulldown now it won't be floating any more */
++                      s3c2410_gpio_pullup(S3C2410_GPH5, 0);
++
++                      if (!neo1973_gps.power_was_on)
++                              regulator_enable(neo1973_gps.regulator[
++                                                        GTA02_GPS_REG_RF_3V]);
++                      return;
++              }
++
++              /*
++               * take care not to power unpowered GPS from UART TX
++               * return them to GPIO and force low
++               */
++              s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
++              s3c2410_gpio_setpin(S3C2410_GPH4, 0);
++              /* don't let RX from unpowered GPS float */
++              s3c2410_gpio_pullup(S3C2410_GPH5, 1);
++              if (neo1973_gps.power_was_on)
++                      regulator_disable(neo1973_gps.regulator[
++                                                        GTA02_GPS_REG_RF_3V]);
++      }
++}
++
++static int gps_pwron_get(void)
++{
++      if (machine_is_neo1973_gta01())
++              return !!s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON);
++
++      if (machine_is_neo1973_gta02())
++              return regulator_is_enabled(neo1973_gps.regulator[GTA02_GPS_REG_RF_3V]);
++      return -1;
++}
++
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++static void gps_rst_set(int on);
++static int gps_rst_get(void);
++#endif
++
++#ifdef CONFIG_PM
++/* This is the flag for keeping gps ON during suspend */
++static void gps_keep_on_in_suspend_set(int on)
++{
++      neo1973_gps.keep_on_in_suspend = on;
++}
++
++static int gps_keep_on_in_suspend_get(void)
++{
++      return neo1973_gps.keep_on_in_suspend;
++}
++#endif
++
++static ssize_t power_gps_read(struct device *dev,
++                            struct device_attribute *attr, char *buf)
++{
++      int ret = 0;
++
++      if (!strcmp(attr->attr.name, "power_on") ||
++          !strcmp(attr->attr.name, "pwron")) {
++              ret = gps_pwron_get();
++#ifdef CONFIG_PM
++      } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
++              ret = gps_keep_on_in_suspend_get();
++#endif
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      } else if (!strcmp(attr->attr.name, "power_avdd_3v")) {
++              ret = gps_power_3v_get();
++      } else if (!strcmp(attr->attr.name, "power_tcxo_2v8")) {
++              ret = gps_power_2v8_get();
++      } else if (!strcmp(attr->attr.name, "reset")) {
++              ret = gps_rst_get();
++      } else if (!strcmp(attr->attr.name, "power_lp_io_3v3")) {
++              ret = gps_power_3v3_get();
++      } else if (!strcmp(attr->attr.name, "power_pll_core_2v5")) {
++              ret = gps_power_2v5_get();
++      } else if (!strcmp(attr->attr.name, "power_core_1v5") ||
++                 !strcmp(attr->attr.name, "power_vdd_core_1v5")) {
++              ret = gps_power_1v5_get();
++#endif
++      }
++      if (ret)
++              return strlcpy(buf, "1\n", 3);
++      else
++              return strlcpy(buf, "0\n", 3);
++}
++
++static ssize_t power_gps_write(struct device *dev,
++                             struct device_attribute *attr, const char *buf,
++                             size_t count)
++{
++      unsigned long on = simple_strtoul(buf, NULL, 10);
++
++      if (!strcmp(attr->attr.name, "power_on") ||
++          !strcmp(attr->attr.name, "pwron")) {
++              gps_pwron_set(on);
++              neo1973_gps.power_was_on = !!on;
++#ifdef CONFIG_PM
++      } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
++              gps_keep_on_in_suspend_set(on);
++#endif
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      } else if (!strcmp(attr->attr.name, "power_avdd_3v")) {
++              gps_power_3v_set(on);
++      } else if (!strcmp(attr->attr.name, "power_tcxo_2v8")) {
++              gps_power_2v8_set(on);
++      } else if (!strcmp(attr->attr.name, "reset")) {
++              gps_rst_set(on);
++      } else if (!strcmp(attr->attr.name, "power_lp_io_3v3")) {
++              gps_power_3v3_set(on);
++      } else if (!strcmp(attr->attr.name, "power_pll_core_2v5")) {
++              gps_power_2v5_set(on);
++      } else if (!strcmp(attr->attr.name, "power_core_1v5") ||
++                 !strcmp(attr->attr.name, "power_vdd_core_1v5")) {
++              gps_power_1v5_set(on);
++#endif
++      }
++      return count;
++}
++
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++
++/* This is the nRESET pin */
++static void gps_rst_set(int on)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              pcf50606_gpo_set_active(gta01_pcf, PCF50606_GPO1, on);
++              break;
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              s3c2410_gpio_setpin(GTA01_GPIO_GPS_RESET, on);
++              break;
++      }
++}
++
++static int gps_rst_get(void)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              return pcf50606_gpo_get_active(gta01_pcf, PCF50606_GPO1);
++              break;
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_RESET))
++                      return 1;
++              break;
++      }
++
++      return 0;
++}
++
++
++static void gps_power_sequence_up(void)
++{
++      /* According to PMB2520 Data Sheet, Rev. 2006-06-05,
++       * Chapter 4.2.2 */
++
++      /* nRESET must be asserted low */
++      gps_rst_set(0);
++
++      /* POWERON must be de-asserted (low) */
++      gps_pwron_set(0);
++
++      /* Apply VDD_IO and VDD_LPREG_IN */
++      gps_power_3v3_set(1);
++
++      /* VDD_COREREG_IN, VDD_PLLREG_IN */
++      gps_power_1v5_set(1);
++      gps_power_2v5_set(1);
++
++      /* and VDD_RF may be applied */
++      gps_power_2v8_set(1);
++
++      /* We need to enable AVDD, since in GTA01Bv3 it is
++       * shared with RFREG_IN */
++      gps_power_3v_set(1);
++
++      msleep(3);      /* Is 3ms enough? */
++
++      /* De-asert nRESET */
++      gps_rst_set(1);
++
++      /* Switch power on */
++      gps_pwron_set(1);
++
++}
++
++static void gps_power_sequence_down(void)
++{
++      /* According to PMB2520 Data Sheet, Rev. 2006-06-05,
++       * Chapter 4.2.3.1 */
++      gps_pwron_set(0);
++
++      /* Don't disable AVDD before PWRON is cleared, since
++       * in GTA01Bv3, AVDD and RFREG_IN are shared */
++      if (neo1973_gps.regulator_state[GTA01_GPS_REG_3V])
++              gps_power_3v_set(0);
++
++      /* Remove VDD_COREREG_IN, VDD_PLLREG_IN and VDD_REFREG_IN */
++      if (neo1973_gps.regulator_state[GTA01_GPS_REG_1V5])
++              gps_power_1v5_set(0);
++      if (neo1973_gps.regulator_state[GTA01_GPS_REG_2V5])
++              gps_power_2v5_set(0);
++      if (neo1973_gps.regulator_state[GTA01_GPS_REG_2V8])
++              gps_power_2v8_set(0);
++
++      /* Remove VDD_LPREG_IN and VDD_IO */
++      if (neo1973_gps.regulator_state[GTA01_GPS_REG_3V3])
++              gps_power_3v3_set(0);
++
++}
++
++static ssize_t power_sequence_read(struct device *dev,
++                                 struct device_attribute *attr,
++                                 char *buf)
++{
++      return strlcpy(buf, "power_up power_down\n", PAGE_SIZE);
++}
++
++static ssize_t power_sequence_write(struct device *dev,
++                                  struct device_attribute *attr,
++                                  const char *buf, size_t count)
++{
++      dev_dbg(dev, "wrote: '%s'\n", buf);
++
++      if (!strncmp(buf, "power_up", 8))
++              gps_power_sequence_up();
++      else if (!strncmp(buf, "power_down", 10))
++              gps_power_sequence_down();
++      else
++              return -EINVAL;
++
++      return count;
++}
++
++static DEVICE_ATTR(power_tcxo_2v8, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_avdd_3v, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(reset, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_lp_io_3v3, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_pll_core_2v5, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_core_1v5, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_vdd_core_1v5, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(power_sequence, 0644, power_sequence_read,
++                 power_sequence_write);
++#endif
++
++#ifdef CONFIG_PM
++static int gta01_pm_gps_suspend(struct platform_device *pdev,
++                              pm_message_t state)
++{
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      if (machine_is_neo1973_gta01())
++              /* FIXME */
++              gps_power_sequence_down();
++#endif
++      if (machine_is_neo1973_gta02()) {
++              if (!neo1973_gps.keep_on_in_suspend ||
++                  !neo1973_gps.power_was_on)
++                      gps_pwron_set(0);
++              else
++                      dev_warn(&pdev->dev, "GTA02: keeping gps ON "
++                               "during suspend\n");
++      }
++
++      return 0;
++}
++
++static int gta01_pm_gps_resume(struct platform_device *pdev)
++{
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      if (machine_is_neo1973_gta01())
++              if (neo1973_gps.power_was_on)
++                      gps_power_sequence_up();
++#endif
++      if (machine_is_neo1973_gta02())
++              if (!neo1973_gps.keep_on_in_suspend && neo1973_gps.power_was_on)
++                  gps_pwron_set(1);
++
++      return 0;
++}
++
++static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
++#else
++#define gta01_pm_gps_suspend  NULL
++#define gta01_pm_gps_resume   NULL
++#endif
++
++static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
++static DEVICE_ATTR(pwron, 0644, power_gps_read, power_gps_write);
++
++
++static struct attribute *gta01_gps_sysfs_entries[] = {
++      &dev_attr_power_on.attr,
++      &dev_attr_pwron.attr,
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      &dev_attr_power_avdd_3v.attr,
++      &dev_attr_reset.attr,
++      &dev_attr_power_lp_io_3v3.attr,
++      &dev_attr_power_pll_core_2v5.attr,
++      &dev_attr_power_sequence.attr,
++      NULL,   /* power_core_1v5 */
++      NULL,   /* power_vdd_core_1v5 */
++#endif
++      NULL    /* terminating entry */
++};
++
++static struct attribute_group gta01_gps_attr_group = {
++      .name   = NULL,
++      .attrs  = gta01_gps_sysfs_entries,
++};
++
++static struct attribute *gta02_gps_sysfs_entries[] = {
++      &dev_attr_power_on.attr,
++#ifdef CONFIG_PM
++      &dev_attr_keep_on_in_suspend.attr,
++#endif
++      NULL
++};
++
++static struct attribute_group gta02_gps_attr_group = {
++      .name   = NULL,
++      .attrs  = gta02_gps_sysfs_entries,
++};
++
++static int __init gta01_pm_gps_probe(struct platform_device *pdev)
++{
++      int ret;
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      int entries = ARRAY_SIZE(gta01_gps_sysfs_entries);
++#endif
++
++      if (machine_is_neo1973_gta01()) {
++              s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_PWRON, S3C2410_GPIO_OUTPUT);
++
++              switch (S3C_SYSTEM_REV_ATAG) {
++              case GTA01v3_SYSTEM_REV:
++                      break;
++              case GTA01v4_SYSTEM_REV:
++                      s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_RESET,
++                          S3C2410_GPIO_OUTPUT);
++                      break;
++              case GTA01Bv3_SYSTEM_REV:
++              case GTA01Bv4_SYSTEM_REV:
++                      s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_3V3,
++                          S3C2410_GPIO_OUTPUT);
++                      /* fallthrough */
++              case GTA01Bv2_SYSTEM_REV:
++                      s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_2V8,
++                          S3C2410_GPIO_OUTPUT);
++                      s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_3V,
++                          S3C2410_GPIO_OUTPUT);
++                      s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_RESET,
++                          S3C2410_GPIO_OUTPUT);
++                      break;
++              default:
++                      dev_warn(&pdev->dev, "Unknown GTA01 Revision 0x%x, "
++                              "AGPS PM features not available!!!\n",
++                              system_rev);
++                      return -1;
++                      break;
++              }
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      
++              neo1973_gps.regulator[GTA01_GPS_REG_2V8] =
++                                      regulator_get(&pdev->dev, "GPS_2V8");
++              neo1973_gps.regulator[GTA01_GPS_REG_3V] =
++                                      regulator_get(&pdev->dev, "GPS_3V");
++              neo1973_gps.regulator[GTA01_GPS_REG_3V3] =
++                                      regulator_get(&pdev->dev, "GPS_3V3");
++              neo1973_gps.regulator[GTA01_GPS_REG_1V5] =
++                                      regulator_get(&pdev->dev, "GPS_1V5");
++              neo1973_gps.regulator[GTA01_GPS_REG_2V5] =
++                                      regulator_get(&pdev->dev, "GPS_2V5");
++
++              gps_power_sequence_down();
++
++              switch (S3C_SYSTEM_REV_ATAG) {
++              case GTA01v3_SYSTEM_REV:
++              case GTA01v4_SYSTEM_REV:
++              case GTA01Bv2_SYSTEM_REV:
++                      gta01_gps_sysfs_entries[entries-3] =
++                          &dev_attr_power_tcxo_2v8.attr;
++                      break;
++              case GTA01Bv3_SYSTEM_REV:
++              case GTA01Bv4_SYSTEM_REV:
++                      gta01_gps_sysfs_entries[entries-3] =
++                          &dev_attr_power_core_1v5.attr;
++                      gta01_gps_sysfs_entries[entries-2] =
++                          &dev_attr_power_vdd_core_1v5.attr;
++                      break;
++              }
++#endif
++              ret = sysfs_create_group(&pdev->dev.kobj,
++                  &gta01_gps_attr_group);
++              if (ret)
++                      return ret;
++              return bus_create_device_link(&platform_bus_type,
++                              &pdev->dev.kobj, "gta01-pm-gps.0");
++      }
++
++      if (machine_is_neo1973_gta02()) {
++
++              neo1973_gps.regulator[GTA02_GPS_REG_RF_3V] = regulator_get(
++                                              &pdev->dev, "RF_3V");
++              if (IS_ERR(neo1973_gps.regulator)) {
++                      dev_err(&pdev->dev, "probe failed %ld\n",
++                          PTR_ERR(neo1973_gps.regulator));
++
++                      return PTR_ERR(neo1973_gps.regulator);
++              }
++
++              dev_info(&pdev->dev, "starting\n");
++
++              /*
++               * Here we should call the code that handles the set GPS power
++               * off action.  But, the regulator API does not allow us to
++               * reassert regulator state, and when we read the regulator API
++               * logical state, it can differ from the actual state,  So
++               * a workaround for this is to just set the regulator off in the
++               * PMU directly.  Because that's different from normal flow, we
++               * have to reproduce other things from the OFF action here too.
++               */
++
++              /*
++               * u-boot enables LDO5 (GPS), which doesn't make sense and
++               * causes confusion. We therefore disable the regulator here.
++               */
++              pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
++
++              /*
++               * take care not to power unpowered GPS from UART TX
++               * return them to GPIO and force low
++               */
++              s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
++              s3c2410_gpio_setpin(S3C2410_GPH4, 0);
++              /* don't let RX from unpowered GPS float */
++              s3c2410_gpio_pullup(S3C2410_GPH5, 1);
++
++              return sysfs_create_group(&pdev->dev.kobj,
++                                        &gta02_gps_attr_group);
++      }
++      return -1;
++}
++
++static int gta01_pm_gps_remove(struct platform_device *pdev)
++{
++      if (machine_is_neo1973_gta01()) {
++#ifdef CONFIG_MACH_NEO1973_GTA01
++              int i;
++
++              gps_power_sequence_down();
++              /* Now disable all regulators */
++              for (i = 0; i < GTA01_GPS_NUM_REG; i++) {
++                      regulator_put(neo1973_gps.regulator[i]);
++              }
++#endif
++              bus_remove_device_link(&platform_bus_type, "gta01-pm-gps.0");
++              sysfs_remove_group(&pdev->dev.kobj, &gta01_gps_attr_group);
++      }
++
++      if (machine_is_neo1973_gta02()) {
++              regulator_put(neo1973_gps.regulator[GTA02_GPS_REG_RF_3V]);
++              sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
++      }
++      return 0;
++}
++
++static struct platform_driver gta01_pm_gps_driver = {
++      .probe          = gta01_pm_gps_probe,
++      .remove         = gta01_pm_gps_remove,
++      .suspend        = gta01_pm_gps_suspend,
++      .resume         = gta01_pm_gps_resume,
++      .driver         = {
++              .name           = "neo1973-pm-gps",
++      },
++};
++
++static int __devinit gta01_pm_gps_init(void)
++{
++      return platform_driver_register(&gta01_pm_gps_driver);
++}
++
++static void gta01_pm_gps_exit(void)
++{
++      platform_driver_unregister(&gta01_pm_gps_driver);
++}
++
++module_init(gta01_pm_gps_init);
++module_exit(gta01_pm_gps_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("FIC Neo1973 GPS Power Management");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gps.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gps.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gps.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gps.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1 @@
++extern int neo1973_pm_gps_is_on(void);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,380 @@
++/*
++ * GSM Management code for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/console.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++
++#include <mach/gpio.h>
++#include <asm/mach-types.h>
++#include <mach/gta01.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++#include <mach/s3c24xx-serial.h>
++
++#include <mach/hardware.h>
++#include <mach/cpu.h>
++
++/* For GTA02 */
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/gpio.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++
++int gta_gsm_interrupts;
++EXPORT_SYMBOL(gta_gsm_interrupts);
++
++extern void s3c24xx_serial_console_set_silence(int);
++
++struct gta01pm_priv {
++      int gpio_ngsm_en;
++        int gpio_ndl_gsm;
++
++      struct console *con;
++};
++
++static struct gta01pm_priv gta01_gsm;
++
++static struct console *find_s3c24xx_console(void)
++{
++      struct console *con;
++
++      acquire_console_sem();
++
++      for (con = console_drivers; con; con = con->next) {
++              if (!strcmp(con->name, "ttySAC"))
++                      break;
++      }
++
++      release_console_sem();
++
++      return con;
++}
++
++static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
++                      char *buf)
++{
++      if (!strcmp(attr->attr.name, "power_on")) {
++              if (gta01_gsm.gpio_ngsm_en) {
++                      if (!s3c2410_gpio_getpin(gta01_gsm.gpio_ngsm_en))
++                              goto out_1;
++              } else if (machine_is_neo1973_gta02())
++                      if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
++                              goto out_1;
++      } else if (!strcmp(attr->attr.name, "download")) {
++              if (machine_is_neo1973_gta01()) {
++                      if (s3c2410_gpio_getpin(GTA01_GPIO_MODEM_DNLOAD))
++                              goto out_1;
++              } else if (machine_is_neo1973_gta02()) {
++                      if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
++                              goto out_1;
++              }
++      } else if (!strcmp(attr->attr.name, "flowcontrolled")) {
++              if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT)
++                      goto out_1;
++      }
++
++      return strlcpy(buf, "0\n", 3);
++out_1:
++      return strlcpy(buf, "1\n", 3);
++}
++
++static void gsm_on_off(struct device *dev, int on)
++{
++      if (!on) {
++              if (machine_is_neo1973_gta02()) {
++                      /*
++                       * Do not drive into powered-down GSM side
++                       * GTA02 only, because on GTA01 maybe serial
++                       * is used otherwise.
++                       */
++                      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_INPUT);
++                      s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPIO_INPUT);
++
++                      pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
++              }
++
++              if (gta01_gsm.gpio_ngsm_en)
++                      s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 1);
++
++              if (gta01_gsm.con) {
++                      s3c24xx_serial_console_set_silence(0);
++                      console_start(gta01_gsm.con);
++
++                      dev_dbg(dev, "powered down GTA01 GSM, enabling "
++                                      "serial console\n");
++              }
++
++              return;
++      }
++
++      if (gta01_gsm.con) {
++              dev_dbg(dev, "powering up GSM, thus "
++                              "disconnecting serial console\n");
++
++              console_stop(gta01_gsm.con);
++              s3c24xx_serial_console_set_silence(1);
++      }
++
++      /* allow UART to talk to GSM side now we will power it */
++      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
++      s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
++
++      if (gta01_gsm.gpio_ngsm_en)
++              s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 0);
++
++      if (machine_is_neo1973_gta02())
++              pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
++
++      msleep(100);
++
++      neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 1);
++      msleep(500);
++      neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 0);
++
++      /*
++       * workaround for calypso firmware moko10 and earlier,
++       * without this it will leave IRQ line high after
++       * booting
++       */
++      s3c2410_gpio_setpin(S3C2410_GPH1, 1);
++      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
++      msleep(1000);
++      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
++
++}
++
++static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
++                       const char *buf, size_t count)
++{
++      unsigned long on = simple_strtoul(buf, NULL, 10);
++
++      if (!strcmp(attr->attr.name, "power_on")) {
++              gsm_on_off(dev, on);
++
++              return count;
++      }
++
++      if (!strcmp(attr->attr.name, "download")) {
++              if (machine_is_neo1973_gta01())
++                      s3c2410_gpio_setpin(GTA01_GPIO_MODEM_DNLOAD, on);
++
++              if (machine_is_neo1973_gta02()) {
++                      /*
++                       * the keyboard / buttons driver requests and enables
++                       * the JACK_INSERT IRQ.  We have to take care about
++                       * not enabling and disabling the IRQ when it was
++                       * already in that state or we get "unblanaced IRQ"
++                       * kernel warnings and stack dumps.  So we use the
++                       * copy of the ndl_gsm state to figure out if we should
++                       * enable or disable the jack interrupt
++                       */
++                      if (on) {
++                              if (gta01_gsm.gpio_ndl_gsm)
++                                      disable_irq(gpio_to_irq(
++                                                     GTA02_GPIO_JACK_INSERT));
++                      } else {
++                              if (!gta01_gsm.gpio_ndl_gsm)
++                                      enable_irq(gpio_to_irq(
++                                                     GTA02_GPIO_JACK_INSERT));
++                      }
++
++                      gta01_gsm.gpio_ndl_gsm = !on;
++                      s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
++              }
++
++              return count;
++      }
++
++      if (!strcmp(attr->attr.name, "flowcontrolled")) {
++              if (on) {
++                      gta_gsm_interrupts = 0;
++                      s3c2410_gpio_setpin(S3C2410_GPH1, 1);
++                      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
++              } else
++                      s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
++static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
++
++#ifdef CONFIG_PM
++
++static int gta01_gsm_resume(struct platform_device *pdev);
++static int gta01_gsm_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
++       * don't need to do much here. */
++
++      /* If flowcontrol asserted, abort if GSM already interrupted */
++      if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
++              if (gta_gsm_interrupts)
++                      goto busy;
++      }
++
++      /* disable DL GSM to prevent jack_insert becoming 'floating' */
++      if (machine_is_neo1973_gta02())
++              s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
++      return 0;
++
++busy:
++      return -EBUSY;
++}
++
++static int
++gta01_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
++{
++      /* Last chance: abort if GSM already interrupted */
++      if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
++              if (gta_gsm_interrupts)
++                      return -EBUSY;
++      }
++      return 0;
++}
++
++static int gta01_gsm_resume(struct platform_device *pdev)
++{
++      /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
++       * don't need to do much here. */
++
++      /* Make sure that the kernel console on the serial port is still
++       * disabled. FIXME: resume ordering race with serial driver! */
++      if (gta01_gsm.con && s3c2410_gpio_getpin(GTA01_GPIO_MODEM_ON))
++              console_stop(gta01_gsm.con);
++
++      if (machine_is_neo1973_gta02())
++              s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta01_gsm.gpio_ndl_gsm);
++
++      return 0;
++}
++#else
++#define gta01_gsm_suspend     NULL
++#define gta01_gsm_suspend_late        NULL
++#define gta01_gsm_resume      NULL
++#endif /* CONFIG_PM */
++
++static struct attribute *gta01_gsm_sysfs_entries[] = {
++      &dev_attr_power_on.attr,
++      &dev_attr_reset.attr,
++      &dev_attr_download.attr,
++      &dev_attr_flowcontrolled.attr,
++      NULL
++};
++
++static struct attribute_group gta01_gsm_attr_group = {
++      .name   = NULL,
++      .attrs  = gta01_gsm_sysfs_entries,
++};
++
++static int __init gta01_gsm_probe(struct platform_device *pdev)
++{
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v3_SYSTEM_REV:
++              gta01_gsm.gpio_ngsm_en = GTA01v3_GPIO_nGSM_EN;
++              break;
++      case GTA01v4_SYSTEM_REV:
++              gta01_gsm.gpio_ngsm_en = 0;
++              break;
++      case GTA01Bv2_SYSTEM_REV:
++      case GTA01Bv3_SYSTEM_REV:
++      case GTA01Bv4_SYSTEM_REV:
++              gta01_gsm.gpio_ngsm_en = GTA01Bv2_GPIO_nGSM_EN;
++              s3c2410_gpio_setpin(GTA01v3_GPIO_nGSM_EN, 0);
++              break;
++      case GTA02v1_SYSTEM_REV:
++      case GTA02v2_SYSTEM_REV:
++      case GTA02v3_SYSTEM_REV:
++      case GTA02v4_SYSTEM_REV:
++      case GTA02v5_SYSTEM_REV:
++      case GTA02v6_SYSTEM_REV:
++              gta01_gsm.gpio_ngsm_en = 0;
++              break;
++      default:
++              dev_warn(&pdev->dev, "Unknown Neo1973 Revision 0x%x, "
++                       "some PM features not available!!!\n",
++                       system_rev);
++              break;
++      }
++
++      switch (S3C_SYSTEM_REV_ATAG) {
++      case GTA01v4_SYSTEM_REV:
++      case GTA01Bv2_SYSTEM_REV:
++              gta01_gsm_sysfs_entries[ARRAY_SIZE(gta01_gsm_sysfs_entries)-2] =
++                                                      &dev_attr_download.attr;
++              break;
++      default:
++              break;
++      }
++
++      if (machine_is_neo1973_gta01()) {
++              gta01_gsm.con = find_s3c24xx_console();
++              if (!gta01_gsm.con)
++                      dev_warn(&pdev->dev,
++                               "cannot find S3C24xx console driver\n");
++      } else
++              gta01_gsm.con = NULL;
++
++      /* note that download initially disabled, and enforce that */
++      gta01_gsm.gpio_ndl_gsm = 1;
++      if (machine_is_neo1973_gta02())
++              s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
++
++      /* GSM is to be initially off (at boot, or if this module inserted) */
++      gsm_on_off(&pdev->dev, 0);
++
++      return sysfs_create_group(&pdev->dev.kobj, &gta01_gsm_attr_group);
++}
++
++static int gta01_gsm_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &gta01_gsm_attr_group);
++
++      return 0;
++}
++
++static struct platform_driver gta01_gsm_driver = {
++      .probe          = gta01_gsm_probe,
++      .remove         = gta01_gsm_remove,
++      .suspend        = gta01_gsm_suspend,
++      .suspend_late   = gta01_gsm_suspend_late,
++      .resume         = gta01_gsm_resume,
++      .driver         = {
++              .name           = "neo1973-pm-gsm",
++      },
++};
++
++static int __devinit gta01_gsm_init(void)
++{
++      return platform_driver_register(&gta01_gsm_driver);
++}
++
++static void gta01_gsm_exit(void)
++{
++      platform_driver_unregister(&gta01_gsm_driver);
++}
++
++module_init(gta01_gsm_init);
++module_exit(gta01_gsm_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("FIC Neo1973 GSM Power Management");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_shadow.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_shadow.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/neo1973_shadow.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/neo1973_shadow.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,88 @@
++/*
++ * include/asm-arm/plat-s3c24xx/neo1973.h
++ *
++ * Common utility code for GTA01 and GTA02
++ *
++ * Copyright (C) 2008 by Openmoko, Inc.
++ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++
++#include <asm/gpio.h>
++#include <mach/regs-gpio.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++/**
++ * Shadow GPIO bank B handling. For the LEDs we need to keep track of the state
++ * in software. The s3c2410_gpio_setpin must not be used for GPIOs on bank B
++ */
++static unsigned long gpb_mask;
++static unsigned long gpb_state;
++
++void neo1973_gpb_add_shadow_gpio(unsigned int gpio)
++{
++      unsigned long offset = S3C2410_GPIO_OFFSET(gpio);
++      unsigned long flags;
++
++      local_irq_save(flags);
++      gpb_mask |= 1L << offset;
++      local_irq_restore(flags);
++}
++EXPORT_SYMBOL(neo1973_gpb_add_shadow_gpio);
++
++static void set_shadow_gpio(unsigned long offset, unsigned int value)
++{
++      unsigned long state = value != 0;
++
++      gpb_state &= ~(1L << offset);
++      gpb_state |= state << offset;
++}
++
++void neo1973_gpb_setpin(unsigned int pin, unsigned to)
++{
++      void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0);
++      unsigned long offset = S3C2410_GPIO_OFFSET(pin);
++      unsigned long flags;
++      unsigned long dat;
++
++      BUG_ON(base != S3C24XX_GPIO_BASE(pin));
++
++      local_irq_save(flags);
++      dat = __raw_readl(base + 0x04);
++
++      /* Add the shadow values */
++      dat &= ~gpb_mask;
++      dat |= gpb_state;
++
++      /* Do the operation like s3c2410_gpio_setpin */
++      dat &= ~(1L << offset);
++      dat |= to << offset;
++
++      /* Update the shadow state */
++      if ((1L << offset) & gpb_mask)
++              set_shadow_gpio(offset, to);
++
++      __raw_writel(dat, base + 0x04);
++      local_irq_restore(flags);
++}
++EXPORT_SYMBOL(neo1973_gpb_setpin);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pm.c   2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pm.c        2009-05-10 22:27:59.000000000 +0200
+@@ -31,28 +31,20 @@
+ #include <linux/errno.h>
+ #include <linux/time.h>
+ #include <linux/interrupt.h>
+-#include <linux/crc32.h>
+-#include <linux/ioport.h>
+ #include <linux/serial_core.h>
+ #include <linux/io.h>
+-#include <asm/cacheflush.h>
+-#include <mach/hardware.h>
+-
+ #include <plat/regs-serial.h>
+ #include <mach/regs-clock.h>
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-irq.h>
++#include <mach/hardware.h>
+ #include <asm/mach/time.h>
+ #include <plat/pm.h>
+-/* for external use */
+-
+-unsigned long s3c_pm_flags;
+-
+ #define PFX "s3c24xx-pm: "
+ static struct sleep_save core_save[] = {
+@@ -84,364 +76,17 @@
+       SAVE_ITEM(S3C2410_CLKSLOW),
+ };
+-static struct gpio_sleep {
+-      void __iomem    *base;
+-      unsigned int     gpcon;
+-      unsigned int     gpdat;
+-      unsigned int     gpup;
+-} gpio_save[] = {
+-      [0] = {
+-              .base   = S3C2410_GPACON,
+-      },
+-      [1] = {
+-              .base   = S3C2410_GPBCON,
+-      },
+-      [2] = {
+-              .base   = S3C2410_GPCCON,
+-      },
+-      [3] = {
+-              .base   = S3C2410_GPDCON,
+-      },
+-      [4] = {
+-              .base   = S3C2410_GPECON,
+-      },
+-      [5] = {
+-              .base   = S3C2410_GPFCON,
+-      },
+-      [6] = {
+-              .base   = S3C2410_GPGCON,
+-      },
+-      [7] = {
+-              .base   = S3C2410_GPHCON,
+-      },
+-};
+-
+ static struct sleep_save misc_save[] = {
+       SAVE_ITEM(S3C2410_DCLKCON),
+ };
+-#ifdef CONFIG_S3C2410_PM_DEBUG
+-
+-#define SAVE_UART(va) \
+-      SAVE_ITEM((va) + S3C2410_ULCON), \
+-      SAVE_ITEM((va) + S3C2410_UCON), \
+-      SAVE_ITEM((va) + S3C2410_UFCON), \
+-      SAVE_ITEM((va) + S3C2410_UMCON), \
+-      SAVE_ITEM((va) + S3C2410_UBRDIV)
+-
+-static struct sleep_save uart_save[] = {
+-      SAVE_UART(S3C24XX_VA_UART0),
+-      SAVE_UART(S3C24XX_VA_UART1),
+-#ifndef CONFIG_CPU_S3C2400
+-      SAVE_UART(S3C24XX_VA_UART2),
+-#endif
+-};
+-
+-/* debug
+- *
+- * we send the debug to printascii() to allow it to be seen if the
+- * system never wakes up from the sleep
+-*/
+-
+-extern void printascii(const char *);
+-
+-void pm_dbg(const char *fmt, ...)
+-{
+-      va_list va;
+-      char buff[256];
+-
+-      va_start(va, fmt);
+-      vsprintf(buff, fmt, va);
+-      va_end(va);
+-
+-      printascii(buff);
+-}
+-
+-static void s3c2410_pm_debug_init(void)
+-{
+-      unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+-
+-      /* re-start uart clocks */
+-      tmp |= S3C2410_CLKCON_UART0;
+-      tmp |= S3C2410_CLKCON_UART1;
+-      tmp |= S3C2410_CLKCON_UART2;
+-
+-      __raw_writel(tmp, S3C2410_CLKCON);
+-      udelay(10);
+-}
+-
+-#define DBG(fmt...) pm_dbg(fmt)
+-#else
+-#define DBG(fmt...) printk(KERN_DEBUG fmt)
+-
+-#define s3c2410_pm_debug_init() do { } while(0)
+-
+-static struct sleep_save uart_save[] = {};
+-#endif
+-
+-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
+-
+-/* suspend checking code...
+- *
+- * this next area does a set of crc checks over all the installed
+- * memory, so the system can verify if the resume was ok.
+- *
+- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+- * increasing it will mean that the area corrupted will be less easy to spot,
+- * and reducing the size will cause the CRC save area to grow
+-*/
+-
+-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+-
+-static u32 crc_size;  /* size needed for the crc block */
+-static u32 *crcs;     /* allocated over suspend/resume */
+-
+-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+-
+-/* s3c2410_pm_run_res
+- *
+- * go thorugh the given resource list, and look for system ram
+-*/
+-
+-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+-{
+-      while (ptr != NULL) {
+-              if (ptr->child != NULL)
+-                      s3c2410_pm_run_res(ptr->child, fn, arg);
+-
+-              if ((ptr->flags & IORESOURCE_MEM) &&
+-                  strcmp(ptr->name, "System RAM") == 0) {
+-                      DBG("Found system RAM at %08lx..%08lx\n",
+-                          ptr->start, ptr->end);
+-                      arg = (fn)(ptr, arg);
+-              }
+-
+-              ptr = ptr->sibling;
+-      }
+-}
+-
+-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
+-{
+-      s3c2410_pm_run_res(&iomem_resource, fn, arg);
+-}
+-
+-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
+-{
+-      u32 size = (u32)(res->end - res->start)+1;
+-
+-      size += CHECK_CHUNKSIZE-1;
+-      size /= CHECK_CHUNKSIZE;
+-
+-      DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+-
+-      *val += size * sizeof(u32);
+-      return val;
+-}
+-
+-/* s3c2410_pm_prepare_check
+- *
+- * prepare the necessary information for creating the CRCs. This
+- * must be done before the final save, as it will require memory
+- * allocating, and thus touching bits of the kernel we do not
+- * know about.
+-*/
+-
+-static void s3c2410_pm_check_prepare(void)
+-{
+-      crc_size = 0;
+-
+-      s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+-
+-      DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+-
+-      crcs = kmalloc(crc_size+4, GFP_KERNEL);
+-      if (crcs == NULL)
+-              printk(KERN_ERR "Cannot allocated CRC save area\n");
+-}
+-
+-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
+-{
+-      unsigned long addr, left;
+-
+-      for (addr = res->start; addr < res->end;
+-           addr += CHECK_CHUNKSIZE) {
+-              left = res->end - addr;
+-
+-              if (left > CHECK_CHUNKSIZE)
+-                      left = CHECK_CHUNKSIZE;
+-
+-              *val = crc32_le(~0, phys_to_virt(addr), left);
+-              val++;
+-      }
+-
+-      return val;
+-}
+-
+-/* s3c2410_pm_check_store
+- *
+- * compute the CRC values for the memory blocks before the final
+- * sleep.
+-*/
+-
+-static void s3c2410_pm_check_store(void)
+-{
+-      if (crcs != NULL)
+-              s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
+-}
+-
+-/* in_region
+- *
+- * return TRUE if the area defined by ptr..ptr+size contatins the
+- * what..what+whatsz
+-*/
+-
+-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+-{
+-      if ((what+whatsz) < ptr)
+-              return 0;
+-
+-      if (what > (ptr+size))
+-              return 0;
+-
+-      return 1;
+-}
+-
+-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
+-{
+-      void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+-      unsigned long addr;
+-      unsigned long left;
+-      void *ptr;
+-      u32 calc;
+-
+-      for (addr = res->start; addr < res->end;
+-           addr += CHECK_CHUNKSIZE) {
+-              left = res->end - addr;
+-
+-              if (left > CHECK_CHUNKSIZE)
+-                      left = CHECK_CHUNKSIZE;
+-
+-              ptr = phys_to_virt(addr);
+-
+-              if (in_region(ptr, left, crcs, crc_size)) {
+-                      DBG("skipping %08lx, has crc block in\n", addr);
+-                      goto skip_check;
+-              }
+-
+-              if (in_region(ptr, left, save_at, 32*4 )) {
+-                      DBG("skipping %08lx, has save block in\n", addr);
+-                      goto skip_check;
+-              }
+-
+-              /* calculate and check the checksum */
+-
+-              calc = crc32_le(~0, ptr, left);
+-              if (calc != *val) {
+-                      printk(KERN_ERR PFX "Restore CRC error at "
+-                             "%08lx (%08x vs %08x)\n", addr, calc, *val);
+-
+-                      DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+-                          addr, calc, *val);
+-              }
+-
+-      skip_check:
+-              val++;
+-      }
+-
+-      return val;
+-}
+-
+-/* s3c2410_pm_check_restore
+- *
+- * check the CRCs after the restore event and free the memory used
+- * to hold them
+-*/
+-
+-static void s3c2410_pm_check_restore(void)
+-{
+-      if (crcs != NULL) {
+-              s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
+-              kfree(crcs);
+-              crcs = NULL;
+-      }
+-}
+-
+-#else
+-
+-#define s3c2410_pm_check_prepare() do { } while(0)
+-#define s3c2410_pm_check_restore() do { } while(0)
+-#define s3c2410_pm_check_store()   do { } while(0)
+-#endif
+-
+-/* helper functions to save and restore register state */
+-
+-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+-{
+-      for (; count > 0; count--, ptr++) {
+-              ptr->val = __raw_readl(ptr->reg);
+-              DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+-      }
+-}
+-
+-/* s3c2410_pm_do_restore
+- *
+- * restore the system from the given list of saved registers
+- *
+- * Note, we do not use DBG() in here, as the system may not have
+- * restore the UARTs state yet
+-*/
+-
+-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
+-{
+-      for (; count > 0; count--, ptr++) {
+-              printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+-                     ptr->reg, ptr->val, __raw_readl(ptr->reg));
+-
+-              __raw_writel(ptr->val, ptr->reg);
+-      }
+-}
+-
+-/* s3c2410_pm_do_restore_core
+- *
+- * similar to s3c2410_pm_do_restore_core
+- *
+- * WARNING: Do not put any debug in here that may effect memory or use
+- * peripherals, as things may be changing!
+-*/
+-
+-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
+-{
+-      for (; count > 0; count--, ptr++) {
+-              __raw_writel(ptr->val, ptr->reg);
+-      }
+-}
+-
+-/* s3c2410_pm_show_resume_irqs
+- *
+- * print any IRQs asserted at resume time (ie, we woke from)
+-*/
+-
+-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
+-                                      unsigned long mask)
+-{
+-      int i;
+-
+-      which &= ~mask;
+-
+-      for (i = 0; i <= 31; i++) {
+-              if ((which) & (1L<<i)) {
+-                      DBG("IRQ %d asserted at resume\n", start+i);
+-              }
+-      }
+-}
+-
+-/* s3c2410_pm_check_resume_pin
++/* s3c_pm_check_resume_pin
+  *
+  * check to see if the pin is configured correctly for sleep mode, and
+  * make any necessary adjustments if it is not
+ */
+-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
++static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+ {
+       unsigned long irqstate;
+       unsigned long pinstate;
+@@ -456,21 +101,21 @@
+       if (!irqstate) {
+               if (pinstate == S3C2410_GPIO_IRQ)
+-                      DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
++                      S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+       } else {
+               if (pinstate == S3C2410_GPIO_IRQ) {
+-                      DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
++                      S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+                       s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+               }
+       }
+ }
+-/* s3c2410_pm_configure_extint
++/* s3c_pm_configure_extint
+  *
+  * configure all external interrupt pins
+ */
+-static void s3c2410_pm_configure_extint(void)
++void s3c_pm_configure_extint(void)
+ {
+       int pin;
+@@ -480,336 +125,24 @@
+       */
+       for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
+-              s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
++              s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+       }
+       for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
+-              s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+-      }
+-}
+-
+-/* offsets for CON/DAT/UP registers */
+-
+-#define OFFS_CON      (S3C2410_GPACON - S3C2410_GPACON)
+-#define OFFS_DAT      (S3C2410_GPADAT - S3C2410_GPACON)
+-#define OFFS_UP               (S3C2410_GPBUP  - S3C2410_GPBCON)
+-
+-/* s3c2410_pm_save_gpios()
+- *
+- * Save the state of the GPIOs
+- */
+-
+-static void s3c2410_pm_save_gpios(void)
+-{
+-      struct gpio_sleep *gps = gpio_save;
+-      unsigned int gpio;
+-
+-      for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+-              void __iomem *base = gps->base;
+-
+-              gps->gpcon = __raw_readl(base + OFFS_CON);
+-              gps->gpdat = __raw_readl(base + OFFS_DAT);
+-
+-              if (gpio > 0)
+-                      gps->gpup = __raw_readl(base + OFFS_UP);
+-
+-      }
+-}
+-
+-/* Test whether the given masked+shifted bits of an GPIO configuration
+- * are one of the SFN (special function) modes. */
+-
+-static inline int is_sfn(unsigned long con)
+-{
+-      return (con == 2 || con == 3);
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an input */
+-
+-static inline int is_in(unsigned long con)
+-{
+-      return con == 0;
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an output */
+-
+-static inline int is_out(unsigned long con)
+-{
+-      return con == 1;
+-}
+-
+-/* s3c2410_pm_restore_gpio()
+- *
+- * Restore one of the GPIO banks that was saved during suspend. This is
+- * not as simple as once thought, due to the possibility of glitches
+- * from the order that the CON and DAT registers are set in.
+- *
+- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+- * combinations of changes to check. Three of these, if the pin stays
+- * in the same configuration can be discounted. This leaves us with
+- * the following:
+- *
+- * { IN => OUT }  Change DAT first
+- * { IN => SFN }  Change CON first
+- * { OUT => SFN } Change CON first, so new data will not glitch
+- * { OUT => IN }  Change CON first, so new data will not glitch
+- * { SFN => IN }  Change CON first
+- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+- *
+- * We do not currently deal with the UP registers as these control
+- * weak resistors, so a small delay in change should not need to bring
+- * these into the calculations.
+- *
+- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+- *     state for when it is next output.
+- */
+-
+-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+-{
+-      void __iomem *base = gps->base;
+-      unsigned long gps_gpcon = gps->gpcon;
+-      unsigned long gps_gpdat = gps->gpdat;
+-      unsigned long old_gpcon;
+-      unsigned long old_gpdat;
+-      unsigned long old_gpup = 0x0;
+-      unsigned long gpcon;
+-      int nr;
+-
+-      old_gpcon = __raw_readl(base + OFFS_CON);
+-      old_gpdat = __raw_readl(base + OFFS_DAT);
+-
+-      if (base == S3C2410_GPACON) {
+-              /* GPACON only has one bit per control / data and no PULLUPs.
+-               * GPACON[x] = 0 => Output, 1 => SFN */
+-
+-              /* first set all SFN bits to SFN */
+-
+-              gpcon = old_gpcon | gps->gpcon;
+-              __raw_writel(gpcon, base + OFFS_CON);
+-
+-              /* now set all the other bits */
+-
+-              __raw_writel(gps_gpdat, base + OFFS_DAT);
+-              __raw_writel(gps_gpcon, base + OFFS_CON);
+-      } else {
+-              unsigned long old, new, mask;
+-              unsigned long change_mask = 0x0;
+-
+-              old_gpup = __raw_readl(base + OFFS_UP);
+-
+-              /* Create a change_mask of all the items that need to have
+-               * their CON value changed before their DAT value, so that
+-               * we minimise the work between the two settings.
+-               */
+-
+-              for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+-                      old = (old_gpcon & mask) >> nr;
+-                      new = (gps_gpcon & mask) >> nr;
+-
+-                      /* If there is no change, then skip */
+-
+-                      if (old == new)
+-                              continue;
+-
+-                      /* If both are special function, then skip */
+-
+-                      if (is_sfn(old) && is_sfn(new))
+-                              continue;
+-
+-                      /* Change is IN => OUT, do not change now */
+-
+-                      if (is_in(old) && is_out(new))
+-                              continue;
+-
+-                      /* Change is SFN => OUT, do not change now */
+-
+-                      if (is_sfn(old) && is_out(new))
+-                              continue;
+-
+-                      /* We should now be at the case of IN=>SFN,
+-                       * OUT=>SFN, OUT=>IN, SFN=>IN. */
+-
+-                      change_mask |= mask;
+-              }
+-
+-              /* Write the new CON settings */
+-
+-              gpcon = old_gpcon & ~change_mask;
+-              gpcon |= gps_gpcon & change_mask;
+-
+-              __raw_writel(gpcon, base + OFFS_CON);
+-
+-              /* Now change any items that require DAT,CON */
+-
+-              __raw_writel(gps_gpdat, base + OFFS_DAT);
+-              __raw_writel(gps_gpcon, base + OFFS_CON);
+-              __raw_writel(gps->gpup, base + OFFS_UP);
++              s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+       }
+-
+-      DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+-          index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+ }
+-/** s3c2410_pm_restore_gpios()
+- *
+- * Restore the state of the GPIOs
+- */
+-
+-static void s3c2410_pm_restore_gpios(void)
++void s3c_pm_restore_core(void)
+ {
+-      struct gpio_sleep *gps = gpio_save;
+-      int gpio;
+-
+-      for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+-              s3c2410_pm_restore_gpio(gpio, gps);
+-      }
++      s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
++      s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+ }
+-void (*pm_cpu_prep)(void);
+-void (*pm_cpu_sleep)(void);
+-
+-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+-
+-/* s3c2410_pm_enter
+- *
+- * central control for sleep/resume process
+-*/
+-
+-static int s3c2410_pm_enter(suspend_state_t state)
++void s3c_pm_save_core(void)
+ {
+-      unsigned long regs_save[16];
+-
+-      /* ensure the debug is initialised (if enabled) */
+-
+-      s3c2410_pm_debug_init();
+-
+-      DBG("s3c2410_pm_enter(%d)\n", state);
+-
+-      if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+-              printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+-              return -EINVAL;
+-      }
+-
+-      /* check if we have anything to wake-up with... bad things seem
+-       * to happen if you suspend with no wakeup (system will often
+-       * require a full power-cycle)
+-      */
+-
+-      if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+-          !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+-              printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
+-              printk(KERN_ERR PFX "Aborting sleep\n");
+-              return -EINVAL;
+-      }
+-
+-      /* prepare check area if configured */
+-
+-      s3c2410_pm_check_prepare();
+-
+-      /* store the physical address of the register recovery block */
+-
+-      s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+-
+-      DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+-
+-      /* save all necessary core registers not covered by the drivers */
+-
+-      s3c2410_pm_save_gpios();
+-      s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+-      s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
+-      s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+-
+-      /* set the irq configuration for wake */
+-
+-      s3c2410_pm_configure_extint();
+-
+-      DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+-          s3c_irqwake_intmask, s3c_irqwake_eintmask);
+-
+-      __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+-      __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+-
+-      /* ack any outstanding external interrupts before we go to sleep */
+-
+-      __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+-      __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+-      __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+-
+-      /* call cpu specific preparation */
+-
+-      pm_cpu_prep();
+-
+-      /* flush cache back to ram */
+-
+-      flush_cache_all();
+-
+-      s3c2410_pm_check_store();
+-
+-      /* send the cpu to sleep... */
+-
+-      __raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+-
+-      /* s3c2410_cpu_save will also act as our return point from when
+-       * we resume as it saves its own register state, so use the return
+-       * code to differentiate return from save and return from sleep */
+-
+-      if (s3c2410_cpu_save(regs_save) == 0) {
+-              flush_cache_all();
+-              pm_cpu_sleep();
+-      }
+-
+-      /* restore the cpu state */
+-
+-      cpu_init();
+-
+-      /* restore the system state */
+-
+-      s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+-      s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+-      s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+-      s3c2410_pm_restore_gpios();
+-
+-      s3c2410_pm_debug_init();
+-
+-      /* check what irq (if any) restored the system */
+-
+-      DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+-          __raw_readl(S3C2410_SRCPND),
+-          __raw_readl(S3C2410_EINTPEND));
+-
+-      s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+-                                  s3c_irqwake_intmask);
+-
+-      s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+-                                  s3c_irqwake_eintmask);
+-
+-      DBG("post sleep, preparing to return\n");
+-
+-      s3c2410_pm_check_restore();
+-
+-      /* ok, let's return from sleep */
+-
+-      DBG("S3C2410 PM Resume (post-restore)\n");
+-      return 0;
++      s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
++      s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+ }
+-static struct platform_suspend_ops s3c2410_pm_ops = {
+-      .enter          = s3c2410_pm_enter,
+-      .valid          = suspend_valid_only_mem,
+-};
+-
+-/* s3c2410_pm_init
+- *
+- * Attach the power management functions. This should be called
+- * from the board specific initialisation if the board supports
+- * it.
+-*/
+-
+-int __init s3c2410_pm_init(void)
+-{
+-      printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
+-
+-      suspend_set_ops(&s3c2410_pm_ops);
+-      return 0;
+-}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pm-simtec.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pm-simtec.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pm-simtec.c    2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pm-simtec.c 2009-05-10 22:27:59.000000000 +0200
+@@ -61,7 +61,7 @@
+       __raw_writel(gstatus4, S3C2410_GSTATUS4);
+-      return s3c2410_pm_init();
++      return s3c_pm_init();
+ }
+ arch_initcall(pm_simtec_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pwm-clock.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pwm-clock.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/pwm-clock.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/pwm-clock.c 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,437 @@
++/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
++ *
++ * Copyright (c) 2007 Simtec Electronics
++ * Copyright (c) 2007, 2008 Ben Dooks
++ *    Ben Dooks <ben-linux@fluff.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++*/
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <mach/regs-clock.h>
++#include <mach/regs-gpio.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++#include <asm/plat-s3c/regs-timer.h>
++
++/* Each of the timers 0 through 5 go through the following
++ * clock tree, with the inputs depending on the timers.
++ *
++ * pclk ---- [ prescaler 0 ] -+---> timer 0
++ *                          +---> timer 1
++ *
++ * pclk ---- [ prescaler 1 ] -+---> timer 2
++ *                          +---> timer 3
++ *                          \---> timer 4
++ *
++ * Which are fed into the timers as so:
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ *                                   [mux] -> timer 0
++ * tclk 0 ------------------------------/
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ *                                   [mux] -> timer 1
++ * tclk 0 ------------------------------/
++ *
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ *                                   [mux] -> timer 2
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ *                                   [mux] -> timer 3
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
++ *                                   [mux] -> timer 4
++ * tclk 1 ------------------------------/
++ *
++ * Since the mux and the divider are tied together in the
++ * same register space, it is impossible to set the parent
++ * and the rate at the same time. To avoid this, we add an
++ * intermediate 'prescaled-and-divided' clock to select
++ * as the parent for the timer input clock called tdiv.
++ *
++ * prescaled clk --> pwm-tdiv ---\
++ *                             [ mux ] --> timer X
++ * tclk -------------------------/
++*/
++
++static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
++{
++      unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++      if (clk->id == 1) {
++              tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
++              tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
++      } else {
++              tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
++      }
++
++      return clk_get_rate(clk->parent) / (tcfg0 + 1);
++}
++
++/* TODO - add set rate calls. */
++
++static struct clk clk_timer_scaler[] = {
++      [0]     = {
++              .name           = "pwm-scaler0",
++              .id             = -1,
++              .get_rate       = clk_pwm_scaler_getrate,
++      },
++      [1]     = {
++              .name           = "pwm-scaler1",
++              .id             = -1,
++              .get_rate       = clk_pwm_scaler_getrate,
++      },
++};
++
++static struct clk clk_timer_tclk[] = {
++      [0]     = {
++              .name           = "pwm-tclk0",
++              .id             = -1,
++      },
++      [1]     = {
++              .name           = "pwm-tclk1",
++              .id             = -1,
++      },
++};
++
++struct pwm_tdiv_clk {
++      struct clk      clk;
++      unsigned int    divisor;
++};
++
++static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
++{
++      return container_of(clk, struct pwm_tdiv_clk, clk);
++}
++
++static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
++{
++      return 1 << (1 + tcfg1);
++}
++
++static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
++{
++      unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++      unsigned int divisor;
++
++      tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++      tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++      if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++              divisor = to_tdiv(clk)->divisor;
++      else
++              divisor = tcfg_to_divisor(tcfg1);
++
++      return clk_get_rate(clk->parent) / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
++                                           unsigned long rate)
++{
++      unsigned long parent_rate;
++      unsigned long divisor;
++
++      parent_rate = clk_get_rate(clk->parent);
++      divisor = parent_rate / rate;
++
++      if (divisor <= 2)
++              divisor = 2;
++      else if (divisor <= 4)
++              divisor = 4;
++      else if (divisor <= 8)
++              divisor = 8;
++      else
++              divisor = 16;
++
++      return parent_rate / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
++{
++      unsigned long bits;
++
++      switch (divclk->divisor) {
++      case 2:
++              bits = S3C2410_TCFG1_MUX_DIV2;
++              break;
++      case 4:
++              bits = S3C2410_TCFG1_MUX_DIV4;
++              break;
++      case 8:
++              bits = S3C2410_TCFG1_MUX_DIV8;
++              break;
++      case 16:
++      default:
++              bits = S3C2410_TCFG1_MUX_DIV16;
++              break;
++      }
++
++      return bits;
++}
++
++static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
++{
++      unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++      unsigned long bits = clk_pwm_tdiv_bits(divclk);
++      unsigned long flags;
++      unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
++
++      local_irq_save(flags);
++
++      tcfg1 = __raw_readl(S3C2410_TCFG1);
++      tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++      tcfg1 |= bits << shift;
++      __raw_writel(tcfg1, S3C2410_TCFG1);
++
++      local_irq_restore(flags);
++}
++
++static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
++{
++      struct pwm_tdiv_clk *divclk = to_tdiv(clk);
++      unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++      unsigned long parent_rate = clk_get_rate(clk->parent);
++      unsigned long divisor;
++
++      tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++      tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++      rate = clk_round_rate(clk, rate);
++      divisor = parent_rate / rate;
++
++      if (divisor > 16)
++              return -EINVAL;
++
++      divclk->divisor = divisor;
++
++      /* Update the current MUX settings if we are currently
++       * selected as the clock source for this clock. */
++
++      if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
++              clk_pwm_tdiv_update(divclk);
++
++      return 0;
++}
++
++static struct pwm_tdiv_clk clk_timer_tdiv[] = {
++      [0]     = {
++              .clk    = {
++                      .name           = "pwm-tdiv",
++                      .parent         = &clk_timer_scaler[0],
++                      .get_rate       = clk_pwm_tdiv_get_rate,
++                      .set_rate       = clk_pwm_tdiv_set_rate,
++                      .round_rate     = clk_pwm_tdiv_round_rate,
++              },
++      },
++      [1]     = {
++              .clk    = {
++                      .name           = "pwm-tdiv",
++                      .parent         = &clk_timer_scaler[0],
++                      .get_rate       = clk_pwm_tdiv_get_rate,
++                      .set_rate       = clk_pwm_tdiv_set_rate,
++                      .round_rate     = clk_pwm_tdiv_round_rate,
++              }
++      },
++      [2]     = {
++              .clk    = {
++                      .name           = "pwm-tdiv",
++                      .parent         = &clk_timer_scaler[1],
++                      .get_rate       = clk_pwm_tdiv_get_rate,
++                      .set_rate       = clk_pwm_tdiv_set_rate,
++                      .round_rate     = clk_pwm_tdiv_round_rate,
++              },
++      },
++      [3]     = {
++              .clk    = {
++                      .name           = "pwm-tdiv",
++                      .parent         = &clk_timer_scaler[1],
++                      .get_rate       = clk_pwm_tdiv_get_rate,
++                      .set_rate       = clk_pwm_tdiv_set_rate,
++                      .round_rate     = clk_pwm_tdiv_round_rate,
++              },
++      },
++      [4]     = {
++              .clk    = {
++                      .name           = "pwm-tdiv",
++                      .parent         = &clk_timer_scaler[1],
++                      .get_rate       = clk_pwm_tdiv_get_rate,
++                      .set_rate       = clk_pwm_tdiv_set_rate,
++                      .round_rate     = clk_pwm_tdiv_round_rate,
++              },
++      },
++};
++
++static int __init clk_pwm_tdiv_register(unsigned int id)
++{
++      struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
++      unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++      tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++      tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++      divclk->clk.id = id;
++      divclk->divisor = tcfg_to_divisor(tcfg1);
++
++      return s3c24xx_register_clock(&divclk->clk);
++}
++
++static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
++{
++      return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
++}
++
++static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
++{
++      return &clk_timer_tdiv[id].clk;
++}
++
++static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
++{
++      unsigned int id = clk->id;
++      unsigned long tcfg1;
++      unsigned long flags;
++      unsigned long bits;
++      unsigned long shift = S3C2410_TCFG1_SHIFT(id);
++
++      if (parent == s3c24xx_pwmclk_tclk(id))
++              bits = S3C2410_TCFG1_MUX_TCLK << shift;
++      else if (parent == s3c24xx_pwmclk_tdiv(id))
++              bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
++      else
++              return -EINVAL;
++
++      clk->parent = parent;
++
++      local_irq_save(flags);
++
++      tcfg1 = __raw_readl(S3C2410_TCFG1);
++      tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++      __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
++
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++static struct clk clk_tin[] = {
++      [0]     = {
++              .name           = "pwm-tin",
++              .id             = 0,
++              .set_parent     = clk_pwm_tin_set_parent,
++      },
++      [1]     = {
++              .name           = "pwm-tin",
++              .id             = 1,
++              .set_parent     = clk_pwm_tin_set_parent,
++      },
++      [2]     = {
++              .name           = "pwm-tin",
++              .id             = 2,
++              .set_parent     = clk_pwm_tin_set_parent,
++      },
++      [3]     = {
++              .name           = "pwm-tin",
++              .id             = 3,
++              .set_parent     = clk_pwm_tin_set_parent,
++      },
++      [4]     = {
++              .name           = "pwm-tin",
++              .id             = 4,
++              .set_parent     = clk_pwm_tin_set_parent,
++      },
++};
++
++static __init int clk_pwm_tin_register(struct clk *pwm)
++{
++      unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++      unsigned int id = pwm->id;
++
++      struct clk *parent;
++      int ret;
++
++      ret = s3c24xx_register_clock(pwm);
++      if (ret < 0)
++              return ret;
++
++      tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++      tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++      if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++              parent = s3c24xx_pwmclk_tclk(id);
++      else
++              parent = s3c24xx_pwmclk_tdiv(id);
++
++      return clk_set_parent(pwm, parent);
++}
++
++static __init int s3c24xx_pwmclk_init(void)
++{
++      struct clk *clk_timers;
++      unsigned int clk;
++      int ret;
++
++      clk_timers = clk_get(NULL, "timers");
++      if (IS_ERR(clk_timers)) {
++              printk(KERN_ERR "%s: no parent clock\n", __func__);
++              return -EINVAL;
++      }
++
++      for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
++              clk_timer_scaler[clk].parent = clk_timers;
++              ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
++              if (ret < 0) {
++                      printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
++                      goto err;
++              }
++      }
++
++      for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
++              ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
++              if (ret < 0) {
++                      printk(KERN_ERR "error adding pww tclk%d\n", clk);
++                      goto err;
++              }
++      }
++
++      for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
++              ret = clk_pwm_tdiv_register(clk);
++              if (ret < 0) {
++                      printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
++                      goto err;
++              }
++      }
++
++      for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
++              ret = clk_pwm_tin_register(&clk_tin[clk]);
++              if (ret < 0) {
++                      printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
++                      goto err;
++              }
++      }
++
++      return 0;
++
++ err:
++      return ret;
++}
++
++arch_initcall(s3c24xx_pwmclk_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/s3c244x.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/s3c244x.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/s3c244x.c      2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/s3c244x.c   2009-05-10 22:27:59.000000000 +0200
+@@ -59,6 +59,8 @@
+       s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+ }
++extern struct platform_device s3c_device_ts;
++
+ void __init s3c244x_map_io(void)
+ {
+       /* register our io-tables */
+@@ -70,6 +72,7 @@
+       s3c_device_sdi.name  = "s3c2440-sdi";
+       s3c_device_i2c0.name  = "s3c2440-i2c";
+       s3c_device_nand.name = "s3c2440-nand";
++      s3c_device_ts.name = "s3c2440-ts";
+       s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ }
+@@ -145,13 +148,13 @@
+ static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
+ {
+-      s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
++      s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+       return 0;
+ }
+ static int s3c244x_resume(struct sys_device *dev)
+ {
+-      s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
++      s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+       return 0;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/sleep.S linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/sleep.S
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/sleep.S        2009-05-10 22:05:03.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/sleep.S     2009-05-10 22:27:59.000000000 +0200
+@@ -41,7 +41,7 @@
+       .text
+-      /* s3c2410_cpu_save
++      /* s3c_cpu_save
+        *
+        * save enough of the CPU state to allow us to re-start
+        * pm.c code. as we store items like the sp/lr, we will
+@@ -59,7 +59,7 @@
+        *           1 => resumed from sleep
+       */
+-ENTRY(s3c2410_cpu_save)
++ENTRY(s3c_cpu_save)
+       stmfd   sp!, { r4 - r12, lr }
+       @@ store co-processor registers
+@@ -84,7 +84,7 @@
+       .ltorg
+       @@ the next bits sit in the .data segment, even though they
+-      @@ happen to be code... the s3c2410_sleep_save_phys needs to be
++      @@ happen to be code... the s3c_sleep_save_phys needs to be
+       @@ accessed by the resume code before it can restore the MMU.
+       @@ This means that the variable has to be close enough for the
+       @@ code to read it... since the .text segment needs to be RO,
+@@ -92,19 +92,19 @@
+       .data
+-      .global s3c2410_sleep_save_phys
+-s3c2410_sleep_save_phys:
++      .global s3c_sleep_save_phys
++s3c_sleep_save_phys:
+       .word   0
+       /* sleep magic, to allow the bootloader to check for an valid
+        * image to resume to. Must be the first word before the
+-       * s3c2410_cpu_resume entry.
++       * s3c_cpu_resume entry.
+       */
+       .word   0x2bedf00d
+-      /* s3c2410_cpu_resume
++      /* s3c_cpu_resume
+        *
+        * resume code entry for bootloader to call
+        *
+@@ -113,7 +113,7 @@
+        * must not write to the code segment (code is read-only)
+       */
+-ENTRY(s3c2410_cpu_resume)
++ENTRY(s3c_cpu_resume)
+       mov     r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+       msr     cpsr_c, r0
+@@ -145,7 +145,7 @@
+       mcr     p15, 0, r1, c8, c7, 0           @@ invalidate I & D TLBs
+       mcr     p15, 0, r1, c7, c7, 0           @@ invalidate I & D caches
+-      ldr     r0, s3c2410_sleep_save_phys     @ address of restore block
++      ldr     r0, s3c_sleep_save_phys         @ address of restore block
+       ldmia   r0, { r4 - r13 }
+       mcr     p15, 0, r4, c13, c0, 0          @ PID
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/time.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/time.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c24xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c24xx/time.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,480 @@
++/* linux/arch/arm/plat-s3c24xx/time.c
++ *
++ * Copyright (C) 2003-2005 Simtec Electronics
++ *    Ben Dooks, <ben@simtec.co.uk>
++ *
++ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#include <asm/system.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/map.h>
++#include <asm/plat-s3c/regs-timer.h>
++#include <mach/regs-irq.h>
++#include <asm/mach/time.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++static unsigned long timer_startval;
++static unsigned long timer_usec_ticks;
++static struct work_struct resume_work;
++
++unsigned long pclk;
++struct clk *clk;
++
++#define TIMER_USEC_SHIFT 16
++
++/* we use the shifted arithmetic to work out the ratio of timer ticks
++ * to usecs, as often the peripheral clock is not a nice even multiple
++ * of 1MHz.
++ *
++ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
++ * for the current HZ value of 200 without producing overflows.
++ *
++ * Original patch by Dimitry Andric, updated by Ben Dooks
++*/
++
++
++/* timer_mask_usec_ticks
++ *
++ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
++ * to scale the ticks into usecs
++*/
++
++static inline unsigned long
++timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
++{
++      unsigned long den = pclk / 1000;
++
++      return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
++}
++
++/* timer_ticks_to_usec
++ *
++ * convert timer ticks to usec.
++*/
++
++static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
++{
++      unsigned long res;
++
++      res = ticks * timer_usec_ticks;
++      res += 1 << (TIMER_USEC_SHIFT - 4);     /* round up slightly */
++
++      return res >> TIMER_USEC_SHIFT;
++}
++
++/***
++ * Returns microsecond  since last clock interrupt.  Note that interrupts
++ * will have been disabled by do_gettimeoffset()
++ * IRQs are disabled before entering here from do_gettimeofday()
++ */
++
++#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
++
++unsigned long s3c2410_gettimeoffset (void)
++{
++      unsigned long tdone;
++      unsigned long irqpend;
++      unsigned long tval;
++
++      /* work out how many ticks have gone since last timer interrupt */
++
++        tval =  __raw_readl(S3C2410_TCNTO(4));
++      tdone = timer_startval - tval;
++
++      /* check to see if there is an interrupt pending */
++
++      irqpend = __raw_readl(S3C2410_SRCPND);
++      if (irqpend & SRCPND_TIMER4) {
++              /* re-read the timer, and try and fix up for the missed
++               * interrupt. Note, the interrupt may go off before the
++               * timer has re-loaded from wrapping.
++               */
++
++              tval =  __raw_readl(S3C2410_TCNTO(4));
++              tdone = timer_startval - tval;
++
++              if (tval != 0)
++                      tdone += timer_startval;
++      }
++
++      return timer_ticks_to_usec(tdone);
++}
++
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t
++s3c2410_timer_interrupt(int irq, void *dev_id)
++{
++      timer_tick();
++      return IRQ_HANDLED;
++}
++
++static struct irqaction s3c2410_timer_irq = {
++      .name           = "S3C2410 Timer Tick",
++      .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++      .handler        = s3c2410_timer_interrupt,
++};
++
++#define use_tclk1_12() ( \
++      machine_is_bast()       || \
++      machine_is_vr1000()     || \
++      machine_is_anubis()     || \
++      machine_is_osiris() )
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ *
++ * Currently we only use timer4, as it is the only timer which has no
++ * other function that can be exploited externally
++ */
++static void s3c2410_timer_setup (void)
++{
++      unsigned long tcon;
++      unsigned long tcnt;
++      unsigned long tcfg1;
++      unsigned long tcfg0;
++
++      tcnt = 0xffff;  /* default value for tcnt */
++
++      /* read the current timer configuration bits */
++
++      tcon = __raw_readl(S3C2410_TCON);
++      tcfg1 = __raw_readl(S3C2410_TCFG1);
++      tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++      /* configure the system for whichever machine is in use */
++
++      if (use_tclk1_12()) {
++              /* timer is at 12MHz, scaler is 1 */
++              timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
++              tcnt = 12000000 / HZ;
++
++              tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++              tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
++      } else {
++              /* since values around 50 to
++               * 70MHz are not values we can directly generate the timer
++               * value from, we need to pre-scale and divide before using it.
++               *
++               * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
++               * (8.45 ticks per usec)
++               */
++
++              /* configure clock tick */
++              timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
++              printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
++
++              tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++              tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
++
++              tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++              tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
++
++              tcnt = (pclk / 6) / HZ;
++      }
++
++      /* timers reload after counting zero, so reduce the count by 1 */
++
++      tcnt--;
++
++      printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
++             tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
++
++      /* check to see if timer is within 16bit range... */
++      if (tcnt > 0xffff) {
++              panic("setup_timer: HZ is too small, cannot configure timer!");
++              return;
++      }
++
++      __raw_writel(tcfg1, S3C2410_TCFG1);
++      __raw_writel(tcfg0, S3C2410_TCFG0);
++
++      timer_startval = tcnt;
++      __raw_writel(tcnt, S3C2410_TCNTB(4));
++
++      /* ensure timer is stopped... */
++
++      tcon &= ~(7<<20);
++      tcon |= S3C2410_TCON_T4RELOAD;
++      tcon |= S3C2410_TCON_T4MANUALUPD;
++
++      __raw_writel(tcon, S3C2410_TCON);
++      __raw_writel(tcnt, S3C2410_TCNTB(4));
++      __raw_writel(tcnt, S3C2410_TCMPB(4));
++
++      /* start the timer running */
++      tcon |= S3C2410_TCON_T4START;
++      tcon &= ~S3C2410_TCON_T4MANUALUPD;
++      __raw_writel(tcon, S3C2410_TCON);
++
++      __raw_writel(__raw_readl(S3C2410_INTMSK) & (~(1UL << 14)),
++                   S3C2410_INTMSK);
++
++}
++
++struct sys_timer s3c24xx_timer;
++static void timer_resume_work(struct work_struct *work)
++{
++      clk_enable(clk);
++
++#ifdef CONFIG_NO_IDLE_HZ
++      if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
++              s3c24xx_timer.dyn_tick->enable();
++      else
++#endif
++              s3c2410_timer_setup();
++}
++
++static void __init s3c2410_timer_init (void)
++{
++      if (!use_tclk1_12()) {
++              /* for the h1940 (and others), we use the pclk from the core
++               * to generate the timer values.
++               */
++
++              /* this is used as default if no other timer can be found */
++              clk = clk_get(NULL, "timers");
++              if (IS_ERR(clk))
++                      panic("failed to get clock for system timer");
++
++              clk_enable(clk);
++
++              pclk = clk_get_rate(clk);
++              printk("pclk = %lu\n", pclk);
++      }
++
++      INIT_WORK(&resume_work, timer_resume_work);
++      s3c2410_timer_setup();
++      setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
++}
++
++static void s3c2410_timer_resume_work(struct work_struct *work)
++{
++      s3c2410_timer_setup();
++}
++
++static void s3c2410_timer_resume(void)
++{
++      static DECLARE_WORK(work, s3c2410_timer_resume_work);
++      int res;
++
++      res = schedule_work(&work);
++      if (!res)
++              printk(KERN_ERR
++                  "s3c2410_timer_resume_work already queued ???\n");
++}
++
++#ifdef CONFIG_NO_IDLE_HZ
++/*
++ * We'll set a constant prescaler so we don't have to bother setting it
++ * when reprogramming and so that we avoid costly divisions.
++ *
++ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
++ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
++ */
++#define INPUT_FREQ_SHIFT      9
++
++static int ticks_last;
++static int ticks_left;
++static uint32_t tcnto_last;
++
++static inline int s3c24xx_timer_read(void)
++{
++      uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
++
++      /*
++       * WARNING: sometimes we get called before TCNTB has been
++       * loaded into the counter and TCNTO then returns its previous
++       * value and kill us, so don't do anything before counter is
++       * reloaded.
++       */
++      if (unlikely(tcnto == tcnto_last))
++              return ticks_last;
++
++      tcnto_last = -1;
++      return tcnto <<
++              ((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
++}
++
++static inline void s3c24xx_timer_program(int ticks)
++{
++      uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
++      uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
++
++      /* Just make sure the timer is stopped.  */
++      __raw_writel(tcon, S3C2410_TCON);
++
++      /* TODO: add likely()ies / unlikely()ies */
++      if (ticks >> 18) {
++              ticks_last = min(ticks, 0xffff << 3);
++              ticks_left = ticks - ticks_last;
++              __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
++              __raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
++      } else if (ticks >> 17) {
++              ticks_last = ticks;
++              ticks_left = 0;
++              __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
++              __raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
++      } else if (ticks >> 16) {
++              ticks_last = ticks;
++              ticks_left = 0;
++              __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
++              __raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
++      } else {
++              ticks_last = ticks;
++              ticks_left = 0;
++              __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
++              __raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
++      }
++
++      tcnto_last = __raw_readl(S3C2410_TCNTO(4));
++      __raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
++                      S3C2410_TCON);
++      __raw_writel(tcon | S3C2410_TCON_T4START,
++                      S3C2410_TCON);
++}
++
++/*
++ * If we have already waited all the time we were supposed to wait,
++ * kick the timer, setting the longest allowed timeout value just
++ * for time-keeping.
++ */
++static inline void s3c24xx_timer_program_idle(void)
++{
++      s3c24xx_timer_program(0xffff << 3);
++}
++
++static inline void s3c24xx_timer_update(int restart)
++{
++      int ticks_cur = s3c24xx_timer_read();
++      int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
++      int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
++
++      if (restart) {
++              if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
++                      s3c24xx_timer_program(ticks_left);
++              else
++                      s3c24xx_timer_program_idle();
++              ticks_last += subjiffy;
++      } else
++              ticks_last = subjiffy;
++
++      while (jiffies_elapsed --)
++              timer_tick();
++}
++
++/* Called when the timer expires.  */
++static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
++{
++      tcnto_last = -1;
++      s3c24xx_timer_update(1);
++
++      return IRQ_HANDLED;
++}
++
++/* Called to update jiffies with time elapsed.  */
++static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
++{
++      s3c24xx_timer_update(0);
++
++      return IRQ_HANDLED;
++}
++
++/*
++ * Programs the next timer interrupt needed.  Called when dynamic tick is
++ * enabled, and to reprogram the ticks to skip from pm_idle.  The CPU goes
++ * to sleep directly after this.
++ */
++static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
++{
++      int subjiffy_left = ticks_last - s3c24xx_timer_read();
++
++      s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
++      ticks_last += subjiffy_left;
++}
++
++static unsigned long s3c24xx_timer_offset_dyn_tick(void)
++{
++      /* TODO */
++      return 0;
++}
++
++static int s3c24xx_timer_enable_dyn_tick(void)
++{
++      /* Set our constant prescaler.  */
++      uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
++      int prescaler =
++              max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
++
++      tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++      tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
++      __raw_writel(tcfg0, S3C2410_TCFG0);
++
++      /* Override handlers.  */
++      s3c2410_timer_irq.handler = s3c24xx_timer_handler;
++      s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
++
++      printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
++                      "%li Hz pclk with prescaler %i\n", pclk, prescaler);
++
++      s3c24xx_timer_program_idle();
++
++      return 0;
++}
++
++static int s3c24xx_timer_disable_dyn_tick(void)
++{
++      s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
++      s3c24xx_timer.offset = s3c2410_gettimeoffset;
++      s3c2410_timer_setup();
++
++      return 0;
++}
++
++static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
++      .enable         = s3c24xx_timer_enable_dyn_tick,
++      .disable        = s3c24xx_timer_disable_dyn_tick,
++      .reprogram      = s3c24xx_timer_reprogram_dyn_tick,
++      .handler        = s3c24xx_timer_handler_dyn_tick,
++};
++#endif        /* CONFIG_NO_IDLE_HZ */
++
++struct sys_timer s3c24xx_timer = {
++      .init           = s3c2410_timer_init,
++      .offset         = s3c2410_gettimeoffset,
++      .resume         = s3c2410_timer_resume,
++#ifdef CONFIG_NO_IDLE_HZ
++      .dyn_tick       = &s3c24xx_dyn_tick_timer,
++#endif
++};
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/clock.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/clock.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/clock.c        2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/clock.c     2009-05-10 22:27:59.000000000 +0200
+@@ -27,6 +27,12 @@
+ #include <plat/devs.h>
+ #include <plat/clock.h>
++struct clk clk_h2 = {
++      .name           = "hclk2",
++      .id             = -1,
++      .rate           = 0,
++};
++
+ struct clk clk_27m = {
+       .name           = "clk_27m",
+       .id             = -1,
+@@ -83,7 +89,7 @@
+       return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+ }
+-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
++int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+ {
+       return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+ }
+@@ -152,6 +158,30 @@
+               .parent         = &clk_48m,
+               .enable         = s3c64xx_sclk_ctrl,
+               .ctrlbit        = S3C_CLKCON_SCLK_MMC2_48,
++      }, {
++              .name           = "dma0",
++              .id             = -1,
++              .parent         = &clk_h,
++              .enable         = s3c64xx_hclk_ctrl,
++              .ctrlbit        = S3C_CLKCON_HCLK_DMA0,
++      }, {
++              .name           = "dma1",
++              .id             = -1,
++              .parent         = &clk_h,
++              .enable         = s3c64xx_hclk_ctrl,
++              .ctrlbit        = S3C_CLKCON_HCLK_DMA1,
++      }, {
++              .name           = "dma2",
++              .id             = -1,
++              .parent         = &clk_h,
++              .enable         = s3c64xx_hclk_ctrl,
++              .ctrlbit        = S3C_CLKCON_HCLK_SDMA0,
++      }, {
++              .name           = "dma3",
++              .id             = -1,
++              .parent         = &clk_h,
++              .enable         = s3c64xx_hclk_ctrl,
++              .ctrlbit        = S3C_CLKCON_HCLK_SDMA1,
+       },
+ };
+@@ -246,6 +276,7 @@
+       &clk_epll,
+       &clk_27m,
+       &clk_48m,
++      &clk_h2,
+ };
+ void s3c64xx_register_clocks(void)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/cpu.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/cpu.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/cpu.c  2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/cpu.c       2009-05-10 22:27:59.000000000 +0200
+@@ -16,6 +16,7 @@
+ #include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/ioport.h>
++#include <linux/sysdev.h>
+ #include <linux/serial_core.h>
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+@@ -96,9 +97,34 @@
+               .pfn            = __phys_to_pfn(S3C64XX_PA_GPIO),
+               .length         = SZ_4K,
+               .type           = MT_DEVICE,
+-      },
++      }, {
++              .virtual        = (unsigned long)S3C64XX_VA_MODEM,
++              .pfn            = __phys_to_pfn(S3C64XX_PA_MODEM),
++              .length         = SZ_4K,
++              .type           = MT_DEVICE,
++      }, {
++              .virtual        = (unsigned long)S3C_VA_TZIC0,
++              .pfn            = __phys_to_pfn(S3C64XX_PA_TZIC0),
++              .length         = SZ_4K,
++              .type           = MT_DEVICE,
++      }, {
++              .virtual        = (unsigned long)S3C_VA_TZIC1,
++              .pfn            = __phys_to_pfn(S3C64XX_PA_TZIC1),
++              .length         = SZ_4K,
++              .type           = MT_DEVICE,
++      }
+ };
++
++struct sysdev_class s3c64xx_sysclass = {
++      .name   = "s3c64xx-core",
++};
++
++static struct sys_device s3c64xx_sysdev = {
++      .cls    = &s3c64xx_sysclass,
++};
++
++
+ /* read cpu identification code */
+ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+@@ -112,3 +138,11 @@
+       idcode = __raw_readl(S3C_VA_SYS + 0x118);
+       s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ }
++
++static __init int s3c64xx_sysdev_init(void)
++{
++      sysdev_class_register(&s3c64xx_sysclass);
++      return sysdev_register(&s3c64xx_sysdev);
++}
++
++core_initcall(s3c64xx_sysdev_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/cpufreq.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/cpufreq.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/cpufreq.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/cpufreq.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,225 @@
++/* linux/arch/arm/plat-s3c64xx/cpufreq.c
++ *
++ * Copyright 2009 Wolfson Microelectronics plc
++ *
++ * S3C64XX CPUfreq Support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/regulator/consumer.h>
++
++#include <mach/cpu.h>
++
++static struct clk *armclk;
++static struct regulator *vddarm;
++
++struct s3c64xx_dvfs {
++      unsigned int vddarm_min;
++      unsigned int vddarm_max;
++};
++
++static struct s3c64xx_dvfs s3c6410_dvfs_table[] = {
++      [0] = { 1000000, 1000000 },
++      [1] = { 1000000, 1050000 },
++      [2] = { 1050000, 1100000 },
++      [3] = { 1050000, 1150000 },
++      [4] = { 1250000, 1350000 },
++};
++
++static struct cpufreq_frequency_table s3c6410_freq_table[] = {
++      { 0,  66000 },
++      { 0, 133000 },
++      { 1, 222000 },
++      { 1, 266000 },
++      { 2, 333000 },
++      { 2, 400000 },
++      { 3, 532000 },
++      { 3, 533000 },
++      { 4, 667000 },
++      { 0, CPUFREQ_TABLE_END },
++};
++
++/* Data tables for current CPU and maximum index into it */
++static struct cpufreq_frequency_table *s3c64xx_freq_table;
++static struct s3c64xx_dvfs *s3c64xx_dvfs_table;
++
++static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
++{
++      if (policy->cpu != 0)
++              return -EINVAL;
++
++      return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
++}
++
++static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
++{
++      if (cpu != 0)
++              return 0;
++
++      return clk_get_rate(armclk) / 1000;
++}
++
++static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
++                                    unsigned int target_freq,
++                                    unsigned int relation)
++{
++      int ret = 0;
++      unsigned int i;
++      struct cpufreq_freqs freqs;
++      struct s3c64xx_dvfs *dvfs;
++
++      ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
++                                           target_freq, relation, &i);
++      if (ret != 0)
++              return ret;
++
++      freqs.cpu = 0;
++      freqs.old = clk_get_rate(armclk) / 1000;
++      freqs.new = s3c64xx_freq_table[i].frequency;
++      freqs.flags = 0;
++      dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
++
++      if (freqs.old == freqs.new)
++              return 0;
++
++      pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
++
++      cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++
++#ifdef CONFIG_REGULATOR
++      if (vddarm && freqs.new > freqs.old) {
++              ret = regulator_set_voltage(vddarm,
++                                          dvfs->vddarm_min,
++                                          dvfs->vddarm_max);
++              if (ret != 0) {
++                      pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
++                             freqs.new, ret);
++                      goto err;
++              }
++      }
++#endif
++
++      ret = clk_set_rate(armclk, freqs.new * 1000);
++      if (ret < 0) {
++              pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
++                     freqs.new, ret);
++              goto err;
++      }
++
++#ifdef CONFIG_REGULATOR
++      if (vddarm && freqs.new < freqs.old) {
++              ret = regulator_set_voltage(vddarm,
++                                          dvfs->vddarm_min,
++                                          dvfs->vddarm_max);
++              if (ret != 0) {
++                      pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
++                             freqs.new, ret);
++                      goto err_clk;
++              }
++      }
++#endif
++
++      cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++      pr_debug("cpufreq: Set actual frequency %lukHz\n",
++               clk_get_rate(armclk) / 1000);
++
++      return 0;
++
++err_clk:
++      if (clk_set_rate(armclk, freqs.old * 1000) < 0)
++              pr_err("Failed to restore original clock rate\n");
++err:
++      cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++      return ret;
++}
++
++
++static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++      int ret;
++      struct cpufreq_frequency_table *freq;;
++
++      if (policy->cpu != 0)
++              return -EINVAL;
++
++      if (cpu_is_s3c6410()) {
++              s3c64xx_freq_table = s3c6410_freq_table;
++              s3c64xx_dvfs_table = s3c6410_dvfs_table;
++      }
++
++      if (s3c64xx_freq_table == NULL) {
++              pr_err("cpufreq: No frequency information for this CPU\n");
++              return -ENODEV;
++      }
++
++      armclk = clk_get(NULL, "armclk");
++      if (IS_ERR(armclk)) {
++              pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
++                     PTR_ERR(armclk));
++              return PTR_ERR(armclk);
++      }
++
++#ifdef CONFIG_REGULATOR
++      vddarm = regulator_get(NULL, "vddarm");
++      if (IS_ERR(vddarm)) {
++              ret = PTR_ERR(vddarm);
++              pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
++              pr_err("cpufreq: Only frequency scaling available\n");
++              vddarm = NULL;
++      }
++#endif
++
++      /* Check for frequencies we can generate */
++      freq = s3c64xx_freq_table;
++      while (freq->frequency != CPUFREQ_TABLE_END) {
++              unsigned long r;
++
++              r = clk_round_rate(armclk, freq->frequency * 1000);
++              r /= 1000;
++
++              if (r != freq->frequency)
++                      freq->frequency = CPUFREQ_ENTRY_INVALID;
++
++              freq++;
++      }
++
++      policy->cur = clk_get_rate(armclk) / 1000;
++      policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
++
++      ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
++      if (ret == 0)
++              return ret;
++
++      pr_err("cpufreq: Failed to configure frequency table: %d\n", ret);
++
++      regulator_put(vddarm);
++      clk_put(armclk);
++      return ret;
++}
++
++static struct cpufreq_driver s3c64xx_cpufreq_driver = {
++      .owner          = THIS_MODULE,
++      .flags          = 0,
++      .verify         = s3c64xx_cpufreq_verify_speed,
++      .target         = s3c64xx_cpufreq_set_target,
++      .get            = s3c64xx_cpufreq_get_speed,
++      .init           = s3c64xx_cpufreq_driver_init,
++      .name           = "s3c64xx",
++};
++
++static int __init s3c64xx_cpufreq_init(void)
++{
++      return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
++}
++module_init(s3c64xx_cpufreq_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dev-usbgadget.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dev-usbgadget.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dev-usbgadget.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dev-usbgadget.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,32 @@
++/* Base S3C64XX usbgadget resource and device definitions */
++
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/ioport.h>
++
++#include <mach/map.h>
++#include <plat/map-base.h>
++#include <plat/devs.h>
++#include <plat/irqs.h>
++
++static struct resource s3c_usbgadget_resource[] = {
++      [0] = {
++              .start = S3C64XX_PA_OTG,
++              .end   = S3C64XX_PA_OTG + 0x200000  - 1,
++              .flags = IORESOURCE_MEM,
++      },
++      [1] = {
++              .start = IRQ_OTG,
++              .end   = IRQ_OTG,
++              .flags = IORESOURCE_IRQ,
++      }
++};
++
++struct platform_device s3c_device_usbgadget = {
++      .name             = "s3c-otg-usbgadget",
++      .id               = -1,
++      .num_resources    = ARRAY_SIZE(s3c_usbgadget_resource),
++      .resource         = s3c_usbgadget_resource,
++};
++EXPORT_SYMBOL(s3c_device_usbgadget);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dma.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dma.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dma.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dma.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,728 @@
++/* linux/arch/arm/plat-s3c64xx/dma.c
++ *
++ * Copyright 2009 Openmoko, Inc.
++ * Copyright 2009 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX DMA core
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/dmapool.h>
++#include <linux/sysdev.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++#include <plat/dma-plat.h>
++
++#include <plat/pl080.h>
++#include <mach/map.h>
++#include <plat/regs-sys.h>
++
++#define DEBUG
++
++#undef pr_debug
++#define pr_debug(x...) printk(x)
++
++/* dma channel state information */
++
++
++struct s3c64xx_dmac {
++      struct sys_device        sysdev;
++      struct clk              *clk;
++      void __iomem            *regs;
++      struct s3c2410_dma_chan *channels;
++      enum dma_ch              chanbase;
++};
++
++/* pool to provide LLI buffers */
++static struct dma_pool *dma_pool;
++
++/* Debug configuration and code */
++
++static unsigned char debug_show_buffs = 0;
++
++static void dbg_showchan(struct s3c2410_dma_chan *chan)
++{
++      pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
++               chan->number,
++               readl(chan->regs + PL080_CH_SRC_ADDR),
++               readl(chan->regs + PL080_CH_DST_ADDR),
++               readl(chan->regs + PL080_CH_LLI),
++               readl(chan->regs + PL080_CH_CONTROL),
++               readl(chan->regs + PL080S_CH_CONTROL2),
++               readl(chan->regs + PL080S_CH_CONFIG));
++}
++
++static void show_lli(struct pl080_lli *lli)
++{
++      pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
++               lli, lli->src_addr, lli->dst_addr, lli->next_lli,
++               lli->control0, lli->control1);
++}
++
++static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
++{
++      struct s3c64xx_dma_buff *ptr;
++      struct s3c64xx_dma_buff *end;
++
++      pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
++               chan->number, chan->next, chan->curr, chan->end);
++
++      ptr = chan->next;
++      end = chan->end;
++
++      if (debug_show_buffs) {
++              for (; ptr != NULL; ptr = ptr->next) {
++                      pr_debug("DMA%d: %08x ",
++                               chan->number, ptr->lli_dma);
++                      show_lli(ptr->lli);
++              }
++      }
++}
++
++/* End of Debug */
++
++static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
++{
++      struct s3c2410_dma_chan *chan;
++      unsigned int start, offs;
++
++      start = 0;
++
++      if (channel >= DMACH_PCM1_TX)
++              start = 8;
++
++      for (offs = 0; offs < 8; offs++) {
++              chan = &s3c2410_chans[start + offs];
++              if (!chan->in_use)
++                      goto found;
++      }
++
++      return NULL;
++
++found:
++      s3c_dma_chan_map[channel] = chan;
++      return chan;
++}
++
++int s3c2410_dma_config(unsigned int channel, int xferunit)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      if (chan == NULL)
++              return -EINVAL;
++
++      switch (xferunit) {
++      case 1:
++              chan->hw_width = 0;
++              break;
++      case 2:
++              chan->hw_width = 1;
++              break;
++      case 4:
++              chan->hw_width = 2;
++              break;
++      default:
++              printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
++              return -EINVAL;
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_config);
++
++static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
++                               struct pl080_lli *lli,
++                               dma_addr_t data, int size)
++{
++      dma_addr_t src, dst;
++      u32 control0, control1;
++
++      switch (chan->source) {
++      case S3C2410_DMASRC_HW:
++              src = chan->dev_addr;
++              dst = data;
++              control0 = PL080_CONTROL_SRC_AHB2;
++              control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
++              control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
++              control0 |= PL080_CONTROL_DST_INCR;
++              break;
++
++      case S3C2410_DMASRC_MEM:
++              src = data;
++              dst = chan->dev_addr;
++              control0 = PL080_CONTROL_DST_AHB2;
++              control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
++              control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
++              control0 |= PL080_CONTROL_SRC_INCR;
++              break;
++      default:
++              BUG();
++      }
++
++      /* todo - burst control */
++
++      control1 = size / 4; /* TODO - calculate */
++      control0 |= PL080_CONTROL_PROT_SYS;     /* always in priv. mode */
++      control0 |= PL080_CONTROL_TC_IRQ_EN;    /* always fire IRQ */
++
++      lli->src_addr = src;
++      lli->dst_addr = dst;
++      lli->next_lli = 0;
++      lli->control0 = control0;
++      lli->control1 = control1;
++}
++
++static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
++                              struct pl080_lli *lli)
++{
++      void __iomem *regs = chan->regs;
++
++      pr_debug("%s: LLI %p => regs\n", __func__, lli);
++      show_lli(lli);
++
++      writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
++      writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
++      writel(lli->next_lli, regs + PL080_CH_LLI);
++      writel(lli->control0, regs + PL080_CH_CONTROL);
++      writel(lli->control1, regs + PL080S_CH_CONTROL2);
++}
++
++static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
++{
++      struct s3c64xx_dmac *dmac = chan->dmac;
++      u32 config;
++      u32 bit = chan->bit;
++
++      dbg_showchan(chan);
++
++      pr_debug("%s: clearing interrupts\n", __func__);
++
++      /* clear interrupts */
++      writel(bit, dmac->regs + PL080_TC_CLEAR);
++      writel(bit, dmac->regs + PL080_ERR_CLEAR);
++
++      pr_debug("%s: starting channel\n", __func__);
++
++      config = readl(chan->regs + PL080S_CH_CONFIG);
++      config |= PL080_CONFIG_ENABLE;
++
++      pr_debug("%s: writing config %08x\n", __func__, config);
++      writel(config, chan->regs + PL080S_CH_CONFIG);
++
++      return 0;
++}
++
++static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
++{
++      u32 config;
++      int timeout;
++
++      pr_debug("%s: stopping channel\n", __func__);
++
++      dbg_showchan(chan);
++
++      config = readl(chan->regs + PL080S_CH_CONFIG);
++      config |= PL080_CONFIG_HALT;
++      writel(config, chan->regs + PL080S_CH_CONFIG);
++
++      timeout = 1000;
++      do {
++              config = readl(chan->regs + PL080S_CH_CONFIG);
++              pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
++              if (config & PL080_CONFIG_ACTIVE)
++                      udelay(100);
++              else
++                      break;
++              } while (--timeout > 0);
++
++      if (config & PL080_CONFIG_ACTIVE) {
++              printk(KERN_ERR "%s: channel still active\n", __func__);
++              return -EFAULT;
++      }
++
++      config = readl(chan->regs + PL080S_CH_CONFIG);
++      config &= ~PL080_CONFIG_ENABLE;
++      writel(config, chan->regs + PL080S_CH_CONFIG);
++
++      return 0;
++}
++
++static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
++                                       struct s3c64xx_dma_buff *buf,
++                                       enum s3c2410_dma_buffresult result)
++{
++      if (chan->callback_fn != NULL)
++              (chan->callback_fn)(chan, buf->pw, 0, result);
++}
++
++static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
++{
++      dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
++      kfree(buff);
++}
++
++static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
++{
++      struct s3c64xx_dma_buff *buff, *next;
++      u32 config;
++
++      dbg_showchan(chan);
++
++      pr_debug("%s: flushing channel\n", __func__);
++
++      config = readl(chan->regs + PL080S_CH_CONFIG);
++      config &= ~PL080_CONFIG_ENABLE;
++      writel(config, chan->regs + PL080S_CH_CONFIG);
++
++      /* dump all the buffers associated with this channel */
++
++      for (buff = chan->curr; buff != NULL; buff = next) {
++              next = buff->next;
++              pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
++
++              s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
++              s3c64xx_dma_freebuff(buff);
++      }
++
++      chan->curr = chan->next = chan->end = NULL;
++
++      return 0;
++}
++
++int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      WARN_ON(!chan);
++      if (!chan)
++              return -EINVAL;
++
++      switch (op) {
++      case S3C2410_DMAOP_START:
++              return s3c64xx_dma_start(chan);
++
++      case S3C2410_DMAOP_STOP:
++              return s3c64xx_dma_stop(chan);
++
++      case S3C2410_DMAOP_FLUSH:
++              return s3c64xx_dma_flush(chan);
++
++      /* belive PAUSE/RESUME are no-ops */
++      case S3C2410_DMAOP_PAUSE:
++      case S3C2410_DMAOP_RESUME:
++      case S3C2410_DMAOP_STARTED:
++      case S3C2410_DMAOP_TIMEOUT:
++              return 0;
++      }
++
++      return -ENOENT;
++}
++EXPORT_SYMBOL(s3c2410_dma_ctrl);
++
++/* s3c2410_dma_enque
++ *
++ */
++
++int s3c2410_dma_enqueue(unsigned int channel, void *id,
++                      dma_addr_t data, int size)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++      struct s3c64xx_dma_buff *next;
++      struct s3c64xx_dma_buff *buff;
++      struct pl080_lli *lli;
++      int ret;
++
++      WARN_ON(!chan);
++      if (!chan)
++              return -EINVAL;
++
++      buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
++      if (!buff) {
++              printk(KERN_ERR "%s: no memory for buffer\n", __func__);
++              return -ENOMEM;
++      }
++
++      lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
++      if (!lli) {
++              printk(KERN_ERR "%s: no memory for lli\n", __func__);
++              ret = -ENOMEM;
++              goto err_buff;
++      }
++
++      pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
++               __func__, buff, data, lli, (u32)buff->lli_dma, size);
++
++      buff->lli = lli;
++      buff->pw = id;
++
++      s3c64xx_dma_fill_lli(chan, lli, data, size);
++
++      if ((next = chan->next) != NULL) {
++              struct s3c64xx_dma_buff *end = chan->end;
++              struct pl080_lli *endlli = end->lli;
++
++              pr_debug("enquing onto channel\n");
++
++              end->next = buff;
++              endlli->next_lli = buff->lli_dma;
++
++              if (chan->flags & S3C2410_DMAF_CIRCULAR) {
++                      struct s3c64xx_dma_buff *curr = chan->curr;
++                      lli->next_lli = curr->lli_dma;
++              }
++
++              if (next == chan->curr) {
++                      writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
++                      chan->next = buff;
++              }
++
++              show_lli(endlli);
++              chan->end = buff;
++      } else {
++              pr_debug("enquing onto empty channel\n");
++
++              chan->curr = buff;
++              chan->next = buff;
++              chan->end = buff;
++
++              s3c64xx_lli_to_regs(chan, lli);
++      }
++
++      show_lli(lli);
++
++      dbg_showchan(chan);
++      dbg_showbuffs(chan);
++      return 0;
++
++err_buff:
++      kfree(buff);
++      return ret;
++}
++
++EXPORT_SYMBOL(s3c2410_dma_enqueue);
++
++
++int s3c2410_dma_devconfig(int channel,
++                        enum s3c2410_dmasrc source,
++                        unsigned long devaddr)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++      u32 peripheral;
++      u32 config = 0;
++
++      printk("%s: channel %d, source %d, dev %08lx, chan %p\n",
++               __func__, channel, source, devaddr, chan);
++
++      WARN_ON(!chan);
++      if (!chan)
++              return -EINVAL;
++
++      peripheral = (chan->peripheral & 0xf);
++      chan->source = source;
++      chan->dev_addr = devaddr;
++
++      pr_debug("%s: peripheral %d\n", __func__, peripheral);
++
++      switch (source) {
++      case S3C2410_DMASRC_HW:
++              config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
++              config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
++              break;
++      case S3C2410_DMASRC_MEM:
++              config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
++              config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
++              break;
++      default:
++              printk(KERN_ERR "%s: bad source\n", __func__);
++              return -EINVAL;
++      }
++
++      /* allow TC and ERR interrupts */
++      config |= PL080_CONFIG_TC_IRQ_MASK;
++      config |= PL080_CONFIG_ERR_IRQ_MASK;
++
++      pr_debug("%s: config %08x\n", __func__, config);
++
++      writel(config, chan->regs + PL080S_CH_CONFIG);
++
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_devconfig);
++
++
++int s3c2410_dma_getposition(unsigned int channel,
++                          dma_addr_t *src, dma_addr_t *dst)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++
++      WARN_ON(!chan);
++      if (!chan)
++              return -EINVAL;
++
++      if (src != NULL)
++              *src = readl(chan->regs + PL080_CH_SRC_ADDR);
++
++      if (dst != NULL)
++              *dst = readl(chan->regs + PL080_CH_DST_ADDR);
++
++      return 0;
++}
++EXPORT_SYMBOL(s3c2410_dma_getposition);
++
++/* s3c2410_request_dma
++ *
++ * get control of an dma channel
++*/
++
++int s3c2410_dma_request(unsigned int channel,
++                      struct s3c2410_dma_client *client,
++                      void *dev)
++{
++      struct s3c2410_dma_chan *chan;
++      unsigned long flags;
++
++      pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
++               channel, client->name, dev);
++
++      local_irq_save(flags);
++
++      chan = s3c64xx_dma_map_channel(channel);
++      if (chan == NULL) {
++              local_irq_restore(flags);
++              return -EBUSY;
++      }
++
++      dbg_showchan(chan);
++
++      chan->client = client;
++      chan->in_use = 1;
++      chan->peripheral = channel;
++
++      local_irq_restore(flags);
++
++      /* need to setup */
++
++      pr_debug("%s: channel initialised, %p\n", __func__, chan);
++
++      return chan->number | DMACH_LOW_LEVEL;
++}
++
++EXPORT_SYMBOL(s3c2410_dma_request);
++
++/* s3c2410_dma_free
++ *
++ * release the given channel back to the system, will stop and flush
++ * any outstanding transfers, and ensure the channel is ready for the
++ * next claimant.
++ *
++ * Note, although a warning is currently printed if the freeing client
++ * info is not the same as the registrant's client info, the free is still
++ * allowed to go through.
++*/
++
++int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
++{
++      struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
++      unsigned long flags;
++
++      if (chan == NULL)
++              return -EINVAL;
++
++      local_irq_save(flags);
++
++      if (chan->client != client) {
++              printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
++                     channel, chan->client, client);
++      }
++
++      /* sort out stopping and freeing the channel */
++
++
++      chan->client = NULL;
++      chan->in_use = 0;
++
++      if (!(channel & DMACH_LOW_LEVEL))
++              s3c_dma_chan_map[channel] = NULL;
++
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++EXPORT_SYMBOL(s3c2410_dma_free);
++
++
++static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
++{
++      struct s3c2410_dma_chan *chan = dmac->channels + offs;
++
++      /* note, we currently do not bother to work out which buffer
++       * or buffers have been completed since the last tc-irq. */
++
++      if (chan->callback_fn)
++              (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
++}
++
++static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
++{
++      printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
++}
++
++static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
++{
++      struct s3c64xx_dmac *dmac = pw;
++      u32 tcstat, errstat;
++      u32 bit;
++      int offs;
++
++      tcstat = readl(dmac->regs + PL080_TC_STATUS);
++      errstat = readl(dmac->regs + PL080_ERR_STATUS);
++
++      for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
++              if (tcstat & bit) {
++                      writel(bit, dmac->regs + PL080_TC_CLEAR);
++                      s3c64xx_dma_tcirq(dmac, offs);
++              }
++
++              if (errstat & bit) {
++                      s3c64xx_dma_errirq(dmac, offs);
++                      writel(bit, dmac->regs + PL080_ERR_CLEAR);
++              }
++      }
++
++      return IRQ_HANDLED;
++}
++
++static struct sysdev_class dma_sysclass = {
++      .name           = "s3c64xx-dma",
++};
++
++static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
++                           int irq, unsigned int base)
++{
++      struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
++      struct s3c64xx_dmac *dmac;
++      char clkname[16];
++      void __iomem *regs;
++      void __iomem *regptr;
++      int err, ch;
++
++      dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
++      if (!dmac) {
++              printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
++              return -ENOMEM;
++      }
++
++      dmac->sysdev.id = chno / 8;
++      dmac->sysdev.cls = &dma_sysclass;
++
++      err = sysdev_register(&dmac->sysdev);
++      if (err) {
++              printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
++              goto err_alloc;
++      }
++
++      regs = ioremap(base, 0x200);
++      if (!regs) {
++              printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
++              err = -ENXIO;
++              goto err_dev;
++      }
++
++      snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
++
++      dmac->clk = clk_get(NULL, clkname);
++      if (IS_ERR(dmac->clk)) {
++              printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
++              err = PTR_ERR(dmac->clk);
++              goto err_map;
++      }
++
++      clk_enable(dmac->clk);
++
++      dmac->regs = regs;
++      dmac->chanbase = chbase;
++      dmac->channels = chptr;
++
++      err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
++      if (err < 0) {
++              printk(KERN_ERR "%s: failed to get irq\n", __func__);
++              goto err_clk;
++      }
++
++      regptr = regs + PL080_Cx_BASE(0);
++
++      for (ch = 0; ch < 8; ch++, chno++, chptr++) {
++              printk(KERN_INFO "%s: registering DMA %d (%p)\n",
++                     __func__, chno, regptr);
++
++              chptr->bit = 1 << ch;
++              chptr->number = chno;
++              chptr->dmac = dmac;
++              chptr->regs = regptr;
++              regptr += PL008_Cx_STRIDE;
++      }
++
++      /* for the moment, permanently enable the controller */
++      writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
++
++      printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
++
++      return 0;
++
++err_clk:
++      clk_disable(dmac->clk);
++      clk_put(dmac->clk);
++err_map:
++      iounmap(regs);
++err_dev:
++      sysdev_unregister(&dmac->sysdev);
++err_alloc:
++      kfree(dmac);
++      return err;
++}  
++
++static int __init s3c64xx_dma_init(void)
++{
++      int ret;
++
++      printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
++
++      dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
++      if (!dma_pool) {
++              printk(KERN_ERR "%s: failed to create pool\n", __func__);
++              return -ENOMEM;
++      }
++
++      ret = sysdev_class_register(&dma_sysclass);
++      if (ret) {
++              printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
++              return -ENOMEM;
++      }
++
++      /* Set all DMA configuration to be DMA, not SDMA */
++      writel(0xffffff, S3C_SYSREG(0x110));
++      
++      /* Register standard DMA controlers */
++      s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
++      s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
++
++      return 0;
++}
++
++arch_initcall(s3c64xx_dma_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dma-fake.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dma-fake.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/dma-fake.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/dma-fake.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,36 @@
++/* linux/arch/arm/plat-s3c64xx/dma.c
++ *
++ * Copyright 2009 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C64XX DMA core - fake
++ *
++ * http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/sysdev.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/io.h>
++
++#include <asm/system.h>
++#include <asm/irq.h>
++#include <mach/hardware.h>
++#include <mach/dma.h>
++
++
++int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
++{
++      return 0;
++}
++
++EXPORT_SYMBOL(s3c2410_dma_ctrl);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/gpiolib.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/gpiolib.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/gpiolib.c      2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/gpiolib.c   2009-05-10 22:27:59.000000000 +0200
+@@ -18,6 +18,7 @@
+ #include <mach/map.h>
+ #include <mach/gpio.h>
++#include <mach/irqs.h>
+ #include <mach/gpio-core.h>
+ #include <plat/gpio-cfg.h>
+@@ -321,6 +322,11 @@
+       .get_pull       = s3c_gpio_getpull_updown,
+ };
++static int s3c_gpiolib_bankn_toirq(struct gpio_chip *chip, unsigned offset)
++{
++      return S3C_EINT(0) + offset;
++}
++
+ static struct s3c_gpio_chip gpio_2bit[] = {
+       {
+               .base   = S3C64XX_GPF_BASE,
+@@ -353,6 +359,7 @@
+                       .base   = S3C64XX_GPN(0),
+                       .ngpio  = S3C64XX_GPIO_N_NR,
+                       .label  = "GPN",
++                      .to_irq = s3c_gpiolib_bankn_toirq,
+               },
+       }, {
+               .base   = S3C64XX_GPO_BASE,
+@@ -385,12 +392,19 @@
+ {
+       chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
+       chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
++      chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+ }
+ static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+ {
+       chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
+       chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
++      chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
++}
++
++static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
++{
++      chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
+ }
+ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+@@ -412,7 +426,8 @@
+       s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+                           s3c64xx_gpiolib_add_4bit2);
+-      s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
++      s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
++                          s3c64xx_gpiolib_add_2bit);
+       return 0;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/dma-plat.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/dma-plat.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/dma-plat.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,70 @@
++/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
++ *
++ * Copyright 2009 Openmoko, Inc.
++ * Copyright 2009 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX DMA core
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
++
++struct s3c64xx_dma_buff;
++
++/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
++ * @next: Pointer to next buffer in queue or ring.
++ * @pw: Client provided identifier
++ * @lli: Pointer to hardware descriptor this buffer is associated with.
++ * @lli_dma: Hardare address of the descriptor.
++ */
++struct s3c64xx_dma_buff {
++      struct s3c64xx_dma_buff *next;
++
++      void                    *pw;
++      struct pl080_lli        *lli;
++      dma_addr_t               lli_dma;
++};
++
++struct s3c64xx_dmac;
++
++struct s3c2410_dma_chan {
++      unsigned char            number;      /* number of this dma channel */
++      unsigned char            in_use;      /* channel allocated */
++      unsigned char            bit;         /* bit for enable/disable/etc */
++      unsigned char            hw_width;
++      unsigned char            peripheral;
++
++      unsigned int             flags;
++      enum s3c2410_dmasrc      source;
++
++
++      dma_addr_t              dev_addr;
++
++      struct s3c2410_dma_client *client;
++      struct s3c64xx_dmac     *dmac;          /* pointer to controller */
++
++      void __iomem            *regs;
++
++      /* cdriver callbacks */
++      s3c2410_dma_cbfn_t       callback_fn;   /* buffer done callback */
++      s3c2410_dma_opfn_t       op_fn;         /* channel op callback */
++
++      /* buffer list and information */
++      struct s3c64xx_dma_buff *curr;          /* current dma buffer */
++      struct s3c64xx_dma_buff *next;          /* next buffer to load */
++      struct s3c64xx_dma_buff *end;           /* end of queue */
++
++      /* note, when channel is running in circular mode, curr is the
++       * first buffer enqueued, end is the last and curr is where the
++       * last buffer-done event is set-at. The buffers are not freed
++       * and the last buffer hardware descriptor points back to the
++       * first. 
++       */
++};
++
++#include <plat/dma-core.h>
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/irqs.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/irqs.h    2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/irqs.h 2009-05-10 22:27:59.000000000 +0200
+@@ -148,6 +148,7 @@
+ /* compatibility for device defines */
+ #define IRQ_IIC1              IRQ_S3C6410_IIC1
++#define IRQ_USBH              IRQ_UHOST
+ /* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+  * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+@@ -157,6 +158,7 @@
+ #define S3C_EINT(x)           ((x) + S3C_IRQ_EINT_BASE)
+ #define IRQ_EINT(x)           S3C_EINT(x)
++#define IRQ_EINT_BIT(x)               ((x) - S3C_EINT(0))
+ /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+  * that they are sourced from the GPIO pins but with a different scheme for
+@@ -197,5 +199,6 @@
+ #define NR_IRQS       (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
++#define FIQ_START S3C_IRQ(0)
+ #endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/pl080.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/pl080.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/pl080.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/pl080.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,110 @@
++/* arch/arm/include/asm/hardware/pl080.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      http://armlinux.simtec.co.uk/
++ *      Ben Dooks <ben@simtec.co.uk>
++ *
++ * ARM PrimeCell PL080 DMA controller
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++/* Note, there are some Samsung updates to this controller block which
++ * make it not entierly compatible with the PL080 specification from
++ * ARM. When in doubt, check the Samsung documentation first.
++ *
++ * The Samsung defines are PL080S, and add an extra controll register,
++ * the ability to move more than 2^11 counts of data and some extra
++ * OneNAND features.
++*/
++
++#define PL080_INT_STATUS                      (0x00)
++#define PL080_TC_STATUS                               (0x04)
++#define PL080_TC_CLEAR                                (0x08)
++#define PL080_ERR_STATUS                      (0x0C)
++#define PL080_ERR_CLEAR                               (0x10)
++#define PL080_RAW_TC_STATUS                   (0x14)
++#define PL080_RAW_ERR_STATUS                  (0x18)
++#define PL080_EN_CHAN                         (0x1c)
++#define PL080_SOFT_BREQ                               (0x20)
++#define PL080_SOFT_SREQ                               (0x24)
++#define PL080_SOFT_LBREQ                      (0x28)
++#define PL080_SOFT_LSREQ                      (0x2C)
++
++#define PL080_CONFIG                          (0x30)
++#define PL080_CONFIG_M2_BE                    (1 << 2)
++#define PL080_CONFIG_M1_BE                    (1 << 1)
++#define PL080_CONFIG_ENABLE                   (1 << 0)
++
++#define PL080_SYNC                            (0x34)
++
++/* Per channel configuration registers */
++
++#define PL008_Cx_STRIDE                               (0x20)
++#define PL080_Cx_BASE(x)                      ((0x100 + (x * 0x20)))
++#define PL080_Cx_SRC_ADDR(x)                  ((0x100 + (x * 0x20)))
++#define PL080_Cx_DST_ADDR(x)                  ((0x104 + (x * 0x20)))
++#define PL080_Cx_LLI(x)                               ((0x108 + (x * 0x20)))
++#define PL080_Cx_CONTROL(x)                   ((0x10C + (x * 0x20)))
++#define PL080_Cx_CONFIG(x)                    ((0x110 + (x * 0x20)))
++#define PL080S_Cx_CONTROL2(x)                 ((0x110 + (x * 0x20)))
++#define PL080S_Cx_CONFIG(x)                   ((0x114 + (x * 0x20)))
++
++#define PL080_CH_SRC_ADDR                     (0x00)
++#define PL080_CH_DST_ADDR                     (0x04)
++#define PL080_CH_LLI                          (0x08)
++#define PL080_CH_CONTROL                      (0x0C)
++#define PL080_CH_CONFIG                               (0x10)
++#define PL080S_CH_CONTROL2                    (0x10)
++#define PL080S_CH_CONFIG                      (0x14)
++
++#define PL080_LLI_ADDR_MASK                   (0x3fffffff << 2)
++#define PL080_LLI_ADDR_SHIFT                  (2)
++#define PL080_LLI_LM_AHB2                     (1 << 0)
++
++#define PL080_CONTROL_TC_IRQ_EN                       (1 << 31)
++#define PL080_CONTROL_PROT_MASK                       (0x7 << 28)
++#define PL080_CONTROL_PROT_SHIFT              (28)
++#define PL080_CONTROL_PROT_SYS                        (1 << 28)
++#define PL080_CONTROL_DST_INCR                        (1 << 27)
++#define PL080_CONTROL_SRC_INCR                        (1 << 26)
++#define PL080_CONTROL_DST_AHB2                        (1 << 25)
++#define PL080_CONTROL_SRC_AHB2                        (1 << 24)
++#define PL080_CONTROL_DWIDTH_MASK             (0x7 << 21)
++#define PL080_CONTROL_DWIDTH_SHIFT            (21)
++#define PL080_CONTROL_SWIDTH_MASK             (0x7 << 18)
++#define PL080_CONTROL_SWIDTH_SHIFT            (18)
++#define PL080_CONTROL_DB_SIZE_MASK            (0x7 << 15)
++#define PL080_CONTROL_DB_SIZE_SHIFT           (15)
++#define PL080_CONTROL_SB_SIZE_MASK            (0x7 << 12)
++#define PL080_CONTROL_SB_SIZE_SHIFT           (12)
++#define PL080_CONTROL_TRANSFER_SIZE_MASK      (0xfff << 0)
++#define PL080_CONTROL_TRANSFER_SIZE_SHIFT     (0)
++
++#define PL080_CONFIG_HALT                     (1 << 18)
++#define PL080_CONFIG_ACTIVE                   (1 << 17)
++#define PL080_CONFIG_LOCK                     (1 << 16)
++#define PL080_CONFIG_TC_IRQ_MASK              (1 << 15)
++#define PL080_CONFIG_ERR_IRQ_MASK             (1 << 14)
++#define PL080_CONFIG_FLOW_CONTROL_MASK                (0x7 << 11)
++#define PL080_CONFIG_FLOW_CONTROL_SHIFT               (11)
++#define PL080_CONFIG_DST_SEL_MASK             (0xf << 6)
++#define PL080_CONFIG_DST_SEL_SHIFT            (6)
++#define PL080_CONFIG_SRC_SEL_MASK             (0xf << 1)
++#define PL080_CONFIG_SRC_SEL_SHIFT            (1)
++#define PL080_CONFIG_ENABLE                   (1 << 0)
++
++
++/* DMA linked list chain structure */
++
++struct pl080_lli {
++      u32     src_addr;
++      u32     dst_addr;
++      u32     next_lli;
++      u32     control0;
++      u32     control1;
++};
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/pm-core.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/pm-core.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/pm-core.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,106 @@
++/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <plat/regs-gpio.h>
++
++static inline void s3c_pm_debug_init_uart(void)
++{
++      u32 tmp = __raw_readl(S3C_PCLK_GATE);
++
++      /* As a note, since the S3C64XX UARTs generally have multiple
++       * clock sources, we simply enable PCLK at the moment and hope
++       * that the resume settings for the UART are suitable for the
++       * use with PCLK.
++       */
++
++      tmp |= S3C_CLKCON_PCLK_UART0;
++      tmp |= S3C_CLKCON_PCLK_UART1;
++      tmp |= S3C_CLKCON_PCLK_UART2;
++      tmp |= S3C_CLKCON_PCLK_UART3;
++
++      __raw_writel(tmp, S3C_PCLK_GATE);
++      udelay(10);
++}
++
++static inline void s3c_pm_arch_clear_vic(void __iomem *base)
++{
++      __raw_writel(~0, base + VIC_INT_ENABLE_CLEAR);
++      __raw_writel(~0, base + VIC_INT_SOFT_CLEAR);
++}
++
++static inline void s3c_pm_arch_prepare_irqs(void)
++{
++      /* shutdown the VICs */
++      s3c_pm_arch_clear_vic(S3C_VA_VIC0);
++      s3c_pm_arch_clear_vic(S3C_VA_VIC1);
++
++      /* clear any pending EINT0 interrupts */
++      __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
++}
++
++static inline void s3c_pm_arch_stop_clocks(void)
++{
++}
++
++static inline void s3c_pm_arch_show_resume_irqs(void)
++{
++}
++
++/* make these defines, we currently do not have any need to change
++ * the IRQ wake controls depending on the CPU we are running on */
++
++#define s3c_irqwake_eintallow ((1 << 28) - 1)
++#define s3c_irqwake_intallow  (0)
++
++static inline void s3c_pm_arch_update_uart(void __iomem *regs,
++                                         struct pm_uart_save *save)
++{
++      u32 ucon = __raw_readl(regs + S3C2410_UCON);
++      u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
++      u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
++      u32 new_ucon;
++      u32 delta;
++
++      /* S3C64XX UART blocks only support level interrupts, so ensure that
++       * when we restore unused UART blocks we force the level interrupt
++       * settigs. */
++      save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
++
++      /* We have a constraint on changing the clock type of the UART
++       * between UCLKx and PCLK, so ensure that when we restore UCON
++       * that the CLK field is correctly modified if the bootloader
++       * has changed anything.
++       */
++      if (ucon_clk != save_clk) {
++              new_ucon = save->ucon;
++              delta = ucon_clk ^ save_clk;
++
++              /* change from UCLKx => wrong PCLK,
++               * either UCLK can be tested for by a bit-test
++               * with UCLK0 */
++              if (ucon_clk & S3C6400_UCON_UCLK0 &&
++                  !(save_clk & S3C6400_UCON_UCLK0) &&
++                  delta & S3C6400_UCON_PCLK2) {
++                      new_ucon &= ~S3C6400_UCON_UCLK0;
++              } else if (delta == S3C6400_UCON_PCLK2) {
++                      /* as an precaution, don't change from
++                       * PCLK2 => PCLK or vice-versa */
++                      new_ucon ^= S3C6400_UCON_PCLK2;
++              }
++
++              S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
++                        ucon, new_ucon, save->ucon);
++              save->ucon = new_ucon;
++      }
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-camif.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-camif.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-camif.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-camif.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,460 @@
++/* arch/arm/plat-s3c64xx/include/plat/regs-camif.h
++ *
++ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
++ *                  http://www.simtec.co.uk/products/SWLINUX/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++
++#ifndef ___ASM_ARCH_REGS_CAMIF_H
++#define ___ASM_ARCH_REGS_CAMIF_H
++
++#define S3C_CAMIFREG(x) (x)
++
++/*************************************************************************
++ * Macro part
++ ************************************************************************/
++#define S3C_CISRCFMT_SOURCEHSIZE(x)                   ((x) << 16)
++#define S3C_CISRCFMT_GET_SOURCEHSIZE(x)                       (((x) >> 16) & 0x1FFFF)
++#define S3C_CISRCFMT_SOURCEVSIZE(x)                   ((x) << 0)
++#define S3C_CISRCFMT_GET_SOURCEVSIZE(x)                       (((x) >> 0) & 0x1FFF)
++
++#define S3C_CIWDOFST_WINHOROFST(x)                    ((x) << 16)
++#define S3C_CIWDOFST_GET_WINHOROFST(x)                        (((x) >> 16) & 0x7FF)
++#define S3C_CIWDOFST_WINVEROFST(x)                    ((x) << 0)
++#define S3C_CIWDOFST_GET_WINVEROFST(x)                        (((x) >> 0) & 0x7FF)
++
++#define S3C_CIDOWSFT2_WINHOROFST2(x)                  ((x) << 16)
++#define S3C_CIDOWSFT2_GET_WINHOROFST2(x)              (((x) >> 16) & 0x7FF)
++#define S3C_CIDOWSFT2_WINVEROFST2(x)                  ((x) << 0)
++#define S3C_CIDOWSFT2_GET_WINVEROFST2(x)              (((x) >> 0) & 0x7FF)
++
++#define S3C_CICOTRGFMT_TARGETHSIZE_CO(x)              ((x) << 16)
++#define S3C_CICOTRGFMT_GET_TARGETHSIZE_CO(x)          (((x) >> 16) & 0x1FFF)
++
++#define S3C_CICOTRGFMT_TARGETVSIZE_CO(x)              ((x) << 0)
++#define S3C_CICOTRGFMT_GET_TARGETVSIZE_CO(x)          (((x) >> 0) & 0x1FFF)
++
++#define S3C_CICOCTRL_YBURST1_CO(x)                    ((x) << 19)
++#define S3C_CICOCTRL_YBURST2_CO(x)                    ((x) << 14)
++#define S3C_CICOCTRL_CBURST1_CO(x)                    ((x) << 9)
++#define S3C_CICOCTRL_CBURST2_CO(x)                    ((x) << 4)
++
++#define S3C_CICOSCPRERATIO_SHFACTOR_CO(x)             ((x) << 28)
++#define S3C_CICOSCPRERATIO_GET_SHFACTOR_CO(x)         (((x) >> 28) & 0x7F)
++#define S3C_CICOSCPRERATIO_PREHORRATIO_CO(x)          ((x) << 16)
++#define S3C_CICOSCPRERATIO_GET_PREHORRATIO_CO(x)      (((x) >> 16) & 0x7F)
++#define S3C_CICOSCPRERATIO_PREVERRATIO_CO(x)          ((x) << 0)
++#define S3C_CICOSCPRERATIO_GET_PREVERRATIO_CO(x)      (((x) >> 0) & 0x7F)
++
++#define S3C_CICOSCPREDST_PREDSTWIDTH_CO(x)            ((x) << 16)
++#define S3C_CICOSCPREDST_GET_PREDSTWIDTH_CO(x)                (((x) >> 16) & 0x7FF)
++#define S3C_CICOSCPREDST_PREDSTHEIGHT_CO(x)           ((x) << 0)
++#define S3C_CICOSCPREDST_GET_PREDSTHEIGHT_CO(x)               (((x) >> 0) & 0x7FF)
++
++#define S3C_CICOSCCTRL_MAINHORRATIO_CO(x)             ((x) << 16)
++#define S3C_CICOSCCTRL_GET_MAINHORRATIO_CO(x)         (((x) >> 16) & 0x1FF)
++#define S3C_CICOSCCTRL_MAINVERRATIO_CO(x)             ((x) << 0)
++
++#define S3C_CICOSTATUS_FRAMECNT_CO(x)                 ((x) << 26)
++#define S3C_CICOSTATUS_GET_FRAMECNT_CO(x)             (((x) >> 26) & 0x3)
++
++#define S3C_CIPRTRGFMT_TARGETHSIZE_PR(x)              ((x) << 16)
++#define S3C_CIPRTRGFMT_GET_TARGETHSIZE_PR(x)          (((x) >> 16) & 0x1FFF)
++
++#define S3C_CIPRTRGFMT_GET_ROT90_PR(x)                        (((x) >> 13) & 0x1)
++
++#define S3C_CIPRTRGFMT_TARGETVSIZE_PR(x)              ((x) << 0)
++#define S3C_CIPRTRGFMT_GET_TARGETVSIZE_PR(x)          (((x) >> 0) & 0x1FFF)
++
++#define S3C_CIPRSCPRERATIO_SHFACTOR_PR(x)             ((x) << 28)
++#define S3C_CIPRSCPRERATIO_GET_SHFACTOR_PR(x)         (((x) >> 28) & 0xF)
++#define S3C_CIPRSCPRERATIO_PREHORRATIO_PR(x)          ((x) << 16)
++#define S3C_CIPRSCPRERATIO_GET_PREHORRATIO_PR(x)      (((x) >> 16) & 0x7F)
++#define S3C_CIPRSCPRERATIO_PREVERRATIO_PR(x)          ((x) << 0)
++#define S3C_CIPRSCPRERATIO_GET_PREVERRATIO_PR(x)      (((x) >> 0) & 0x7F)
++
++#define S3C_CIPRSCPREDST_PREDSTWIDTH_PR(x)            ((x) << 16)
++#define S3C_CIPRSCPREDST_GET_PREDSTWIDTH_PR(x)                (((x) >> 16) & 0xFFF)
++#define S3C_CIPRSCPREDST_PREDSTHEIGHT_PR(x)           ((x) << 0)
++#define S3C_CIPRSCPREDST_GET_PREDSTHEIGHT_PR(x)               (((x) >> 0) & 0xFFF)
++
++#define S3C_CIPRSCCTRL_MAINHORRATIO_PR(x)             ((x) << 16)
++#define S3C_CIPRSCCTRL_GET_MAINHORRATIO_PR(x)         (((x) >> 16) && 0x1FF)
++#define S3C_CIPRSCCTRL_MAINVERRATIO_PR(x)             ((x) << 0)
++#define S3C_CIPRSCCTRL_GET_MAINVERRATIO_PR(x)         (((x) >> 0) && 0x1FF)
++
++/*************************************************************************
++ * Bit definition part
++ ************************************************************************/
++/* Windows Offset Register */
++#define S3C_CIWDOFST_WINOFSEN                         (1 << 31)
++#define S3C_CIWDOFST_CLROVCOFIY                               (1 << 30)
++#define S3C_CIWDOFST_CLROVRLB_CO                      (1 << 29)
++#define S3C_CIWDOFST_CLROVRLB_PR                      (1 << 28)
++#define S3C_CIWDOFST_CLROVPRFIY                               (1 << 27)
++#define S3C_CIWDOFST_CLROVCOFICB                      (1 << 15)
++#define S3C_CIWDOFST_CLROVCOFICR                      (1 << 14)
++#define S3C_CIWDOFST_CLROVPRFICB                      (1 << 13)
++#define S3C_CIWDOFST_CLROVPRFICR                      (1 << 12)
++
++/* Global Control Register */
++#define S3C_CIGCTRL_SWRST                             (1 << 31)
++#define S3C_CIGCTRL_CAMRST                            (1 << 30)
++
++#if defined (CONFIG_CPU_S3C6400) || defined (CONFIG_CPU_S3C6410)
++#define       S3C_CIGCTRL_IRQ_LEVEL                           (1 << 20)
++#endif
++
++#define S3C_CIGCTRL_TESTPATTERN_VER_INC                       (3 << 27)
++#define S3C_CIGCTRL_TESTPATTERN_HOR_INC                       (2 << 27)
++#define S3C_CIGCTRL_TESTPATTERN_COLOR_BAR             (1 << 27)
++#define S3C_CIGCTRL_TESTPATTERN_NORMAL                        (0 << 27)
++
++#define S3C_CIGCTRL_INVPOLPCLK                                (1 << 26)
++#define S3C_CIGCTRL_INVPOLVSYNC                               (1 << 25)
++#define S3C_CIGCTRL_INVPOLHREF                                (1 << 24)
++#define S3C_CIGCTRL_IRQ_OVFEN                         (1 << 22)
++#define S3C_CIGCTRL_HREF_MASK                         (1 << 21)
++#define S3C_CIGCTRL_IRQ_LEVEL                         (1 << 20)
++#define S3C_CIGCTRL_IRQ_CLR_C                         (1 << 19)
++#define S3C_CIGCTRL_IRQ_CLR_P                         (1 << 18)
++
++/* Codec Target Format Register */
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define S3C_CICOTRGFMT_IN422_422                      (1 << 31)
++#define S3C_CICOTRGFMT_IN422_420                      (0 << 31)
++#define S3C_CICOTRGFMT_OUT422_422                     (1 << 30)
++#define S3C_CICOTRGFMT_OUT422_420                     (0 << 30)
++
++#elif defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++#define S3C_CICOTRGFMT_OUTFORMAT_RGBOUT                       (3 << 29)
++#define S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUTINTERLEAVE        (2 << 29)
++#define S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUT          (1 << 29)
++#define S3C_CICOTRGFMT_OUTFORMAT_YCBCR420OUT          (0 << 29)
++#endif
++
++#define S3C_CICOTRGFMT_INTERLEAVE_ON                  (1 << 29)
++#define S3C_CICOTRGFMT_INTERLEAVE_OFF                 (0 << 29)
++
++#define S3C_CICOTRGFMT_FLIP_180                               (3 << 14)
++#define S3C_CICOTRGFMT_FLIP_Y_MIRROR                  (2 << 14)
++#define S3C_CICOTRGFMT_FLIP_X_MIRROR                  (1 << 14)
++#define S3C_CICOTRGFMT_FLIP_NORMAL                    (0 << 14)
++
++/* Codec DMA Control Register */
++#define S3C_CICOCTRL_LASTIRQEN                                (1 << 2)
++#define S3C_CICOCTRL_ORDER422_CRYCBY                  (3 << 0)
++#define S3C_CICOCTRL_ORDER422_CBYCRY                  (2 << 0)
++#define S3C_CICOCTRL_ORDER422_YCRYCB                  (1 << 0)
++#define S3C_CICOCTRL_ORDER422_YCBYCR                  (0 << 0)
++
++/* Codec Main-Scaler Control Register */
++#define S3C_CICOSCCTRL_SCALERBYPASS_CO                        (1 << 31)
++#define S3C_CICOSCCTRL_SCALEUP_H                      (1 << 30)
++#define S3C_CICOSCCTRL_SCALEUP_V                      (1 << 29)
++
++#define S3C_CICOSCCTRL_CSCR2Y_WIDE                    (1 << 28)
++#define S3C_CICOSCCTRL_CSCR2Y_NARROW                  (0 << 28)
++
++#define S3C_CICOSCCTRL_CSCY2R_WIDE                    (1 << 27)
++#define S3C_CICOSCCTRL_CSCY2R_NARROW                  (0 << 27)
++
++#define S3C_CICOSCCTRL_LCDPATHEN_FIFO                 (1 << 26)
++#define S3C_CICOSCCTRL_LCDPATHEN_DMA                  (0 << 26)
++
++#define S3C_CICOSCCTRL_INTERLACE_INTERLACE            (1 << 25)
++#define S3C_CICOSCCTRL_INTERLACE_PROGRESSIVE          (0 << 25)
++
++#define S3C_CICOSCCTRL_COSCALERSTART                  (1 << 15)
++
++#define S3C_CICOSCCTRL_INRGB_FMT_RGB888                       (2 << 13)
++#define S3C_CICOSCCTRL_INRGB_FMT_RGB666                       (1 << 13)
++#define S3C_CICOSCCTRL_INRGB_FMT_RGB565                       (0 << 13)
++
++#define S3C_CICOSCCTRL_OUTRGB_FMT_RGB888              (2 << 11)
++#define S3C_CICOSCCTRL_OUTRGB_FMT_RGB666              (1 << 11)
++#define S3C_CICOSCCTRL_OUTRGB_FMT_RGB565              (0 << 11)
++
++#define S3C_CICOSCCTRL_EXTRGB_EXTENSION                       (1 << 10)
++#define S3C_CICOSCCTRL_EXTRGB_NORMAL                  (0 << 10)
++
++/* Codec Status Register */
++#define S3C_CICOSTATUS_OVFIY_CO                               (1 << 31)
++#define S3C_CICOSTATUS_OVFICB_CO                      (1 << 30)
++#define S3C_CICOSTATUS_OVFICR_CO                      (1 << 29)
++#define S3C_CICOSTATUS_VSYNC                          (1 << 28)
++#define S3C_CICOSTATUS_WINOFSTEN_CO                   (1 << 25)
++#define S3C_CICOSTATUS_IMGCPTEN_CAMIF                 (1 << 22)
++#define S3C_CICOSTATUS_IMGCPTEN_COSC                  (1 << 21)
++#define S3C_CICOSTATUS_VSYNC_A                                (1 << 20)
++#define S3C_CICOSTATUS_VSYNC_B                                (1 << 19)
++#define S3C_CICOSTATUS_OVRLB_CO                               (1 << 18)
++#define S3C_CICOSTATUS_FRAMEEND_CO                    (1 << 17)
++
++/* Preview Target Format Register */
++#define S3C_CIPRTRGFMT_FLIPMD_180ROT                  (3 << 14)
++#define S3C_CIPRTRGFMT_FLIPMD_YMIRROR                 (2 << 14)
++#define S3C_CIPRTRGFMT_FLIPMD_XMIRROR                 (1 << 14)
++#define S3C_CIPRTRGFMT_FLIPMD_NORMAL                  (0 << 14)
++
++#define S3C_CIPRTRGFMT_ROT90_ROTATE                   (1 << 13)
++#define S3C_CIPRTRGFMT_ROT90_BYPASS                   (0 << 13)
++
++/* Preview DMA Control Register */
++#define S3C_CIPRCTRL_LASTIRQEN_ENABLE                 (1 << 2)
++#define S3C_CIPRCTRL_LASTIRQEN_NORMAL                 (0 << 2)
++
++#define S3C_CIPRCTRL_ORDER422_CRYCBY                  (3 << 0)
++#define S3C_CIPRCTRL_ORDER422_CBYCRY                  (2 << 0)
++#define S3C_CIPRCTRL_ORDER422_YCRYCB                  (1 << 0)
++#define S3C_CIPRCTRL_ORDER422_YCBYCR                  (0 << 0)
++
++/* Preview Main-Scaler Control Register */
++#define S3C_CIPRSCCTRL_SAMPLE_PR                      (1 << 31)
++
++#define S3C_CIPRSCCTRL_RGBFORMAT_24                   (1 << 30)
++#define S3C_CIPRSCCTRL_RGBFORMAT_16                   (0 << 30)
++
++#define S3C_CIPRSCCTRL_START                          (1 << 15)
++
++#define S3C_CIPRSCCTRL_INRGB_FMT_PR_RGB888            (2 << 13)
++#define S3C_CIPRSCCTRL_INRGB_FMT_PR_RGB666            (1 << 13)
++#define S3C_CIPRSCCTRL_INRGB_FMT_PR_RGB565            (0 << 13)
++
++#define S3C_CIPRSCCTRL_OUTRGB_FMT_PR_RGB888           (2 << 11)
++#define S3C_CIPRSCCTRL_OUTRGB_FMT_PR_RGB666           (1 << 11)
++#define S3C_CIPRSCCTRL_OUTRGB_FMT_PR_RGB565           (0 << 11)
++
++/* Preview Status Register */
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define S3C_CIPRSTATUS_OVFICB_PR                      (1 << 31)
++#define S3C_CIPRSTATUS_OVFICR_PR                      (1 << 30)
++
++#elif defined CONFIG_CPU_S3C6400 || defined CONFIG_CPU_S3C6410
++#define S3C_CIPRSTATUS_OVFIY_PR                               (1 << 31)
++#define S3C_CIPRSTATUS_OVFICB_PR                      (1 << 30)
++#define S3C_CIPRSTATUS_OVFICR_PR                      (1 << 29)
++#endif
++
++/* Image Capture Enable Register */
++#define S3C_CIIMGCPT_IMGCPTEN                         (1 << 31)
++#define S3C_CIIMGCPT_IMGCPTEN_COSC                    (1 << 30)
++#define S3C_CIIMGCPT_IMGCPTEN_PRSC                    (1 << 29)
++
++#define S3C_CIIMGCPT_CPT_CODMA_SEL_RGB                        (1 << 26)
++#define S3C_CIIMGCPT_CPT_CODMA_SEL_YUV                        (0 << 26)
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define S3C_CIIMGCPT_CPT_CODMA_RGBFMT_24              (1 << 25)
++#define S3C_CIIMGCPT_CPT_CODMA_RGBFMT_16              (0 << 25)
++#define S3C_CIIMGCPT_CPT_CODMA_ENABLE                 (1 << 24)
++#define S3C_CIIMGCPT_CPT_CODMA_DISABLE                        (0 << 24)
++#define S3C_CIIMGCPT_CPT_CODMA_MOD_CNT                        (1 << 18)
++#define S3C_CIIMGCPT_CPT_CODMA_MOD_EN                 (0 << 18)
++
++#elif defined CONFIG_CPU_S3C6400 || defined CONFIG_CPU_S3C6410
++#define S3C_CIIMGCPT_CPT_FREN_CO_ENABLE                       (1 << 25)
++#define S3C_CIIMGCPT_CPT_FREN_CO_DISABLE              (0 << 25)
++#define S3C_CIIMGCPT_CPT_FREN_PR_ENABLE                       (1 << 24)
++#define S3C_CIIMGCPT_CPT_FREN_PR_DISABLE              (0 << 24)
++#define S3C_CIIMGCPT_CPT_FRMOD_CNT                    (1 << 18)
++#define S3C_CIIMGCPT_CPT_FRMOD_EN                     (0 << 18)
++#endif
++
++/* Image Effects Register */
++#define S3C_CIIMGEFF_IE_ON_PR_ENABLE                  (1 << 31)
++#define S3C_CIIMGEFF_IE_ON_PR_DISABLE                 (0 << 31)
++
++#define S3C_CIIMGEFF_IE_ON_CO_ENABLE                  (1 << 30)
++#define S3C_CIIMGEFF_IE_ON_CO_DISABLE                 (0 << 30)
++
++#define S3C_CIIMGEFF_IE_AFTER_SC_BEFORE                       (0 << 29)
++#define S3C_CIIMGEFF_IE_AFTER_SC_AFTER                        (1 << 29)
++
++#define S3C_CIIMGEFF_FIN_SILHOUETTE                   (5 << 26)
++#define S3C_CIIMGEFF_FIN_EMBOSSING                    (4 << 26)
++#define S3C_CIIMGEFF_FIN_ARTFREEZE                    (3 << 26)
++#define S3C_CIIMGEFF_FIN_NEGATIVE                     (2 << 26)
++#define S3C_CIIMGEFF_FIN_ARBITRARY                    (1 << 26)
++#define S3C_CIIMGEFF_FIN_BYPASS                               (0 << 26)
++
++/* MSDMA for Codec Source Image Width Register */
++#define S3C_MSCOWIDTH_AUTOLOAD_ENABLE                 (1 << 31)
++#define S3C_MSCOWIDTH_AUTOLOAD_DISABLE                        (0 << 31)
++
++#define S3C_MSCOWIDTH_ADDR_CH_ENABLE                  (1 << 30)
++#define S3C_MSCOWIDTH_ADDR_CH_DISABLE                 (0 << 30)
++
++/* MSDMA Control Register */
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define S3C_CIMSCTRL_INTERLEAVE_MS_INTERLEAVE         (1 << 5)
++#define S3C_CIMSCTRL_INTERLEAVE_MS_NONINTERLEAVE      (0 << 5)
++#define S3C_CIMSCTRL_ORDER422_MS_CRYCBY                       (3 << 3)
++#define S3C_CIMSCTRL_ORDER422_MS_CBYCRY                       (2 << 3)
++#define S3C_CIMSCTRL_ORDER422_MS_YCRYCB                       (1 << 3)
++#define S3C_CIMSCTRL_ORDER422_MS_YCBYCR                       (0 << 3)
++#define S3C_CIMSCTRL_SEL_DMA_CAM_MEMORY                       (1 << 2)
++#define S3C_CIMSCTRL_SEL_DMA_CAM_EXTCAM                       (0 << 2)
++#define S3C_CIMSCTRL_SRC420_MS_420                    (1 << 1)
++#define S3C_CIMSCTRL_SRC420_MS_422                    (0 << 1)
++#define S3C_CIMSCTRL_ENVID_MS_SET                     (1 << 0)
++
++#elif defined CONFIG_CPU_S3C6400 || defined CONFIG_CPU_S3C6410
++#define S3C_MSCOCTRL_BC_SEL_FRAME                     (0 << 10)
++#define S3C_MSCOCTRL_BC_SEL_FIELD                     (1 << 10)
++#define S3C_MSCOCTRL_BUFFER_INI_0                     (0 << 8)
++#define S3C_MSCOCTRL_BUFFER_INI_1                     (1 << 8)
++#define S3C_MSCOCTRL_TRG_MODE_SOFT                    (0 << 7)
++#define S3C_MSCOCTRL_TRG_MODE_HARD                    (1 << 7)
++#define S3C_MSCOCTRL_ORDER422_M_C_YCBYCR              (0 << 4)
++#define S3C_MSCOCTRL_ORDER422_M_C_YCRYCB              (1 << 4)
++#define S3C_MSCOCTRL_ORDER422_M_C_CBYCRY              (2 << 4)
++#define S3C_MSCOCTRL_ORDER422_M_C_CRYCBY              (3 << 4)
++#define S3C_MSCOCTRL_SEL_DMA_CAM_C_EXTCAM             (0 << 3)
++#define S3C_MSCOCTRL_SEL_DMA_CAM_C_MEMORY             (1 << 3)
++#define S3C_MSCOCTRL_INFORMAT_M_C_420                 (0 << 1)
++#define S3C_MSCOCTRL_INFORMAT_M_C_422                 (1 << 1)
++#define S3C_MSCOCTRL_INFORMAT_M_C_422_INT             (2 << 1)
++#define S3C_MSCOCTRL_INFORMAT_M_C_RGB                 (3 << 1)
++#define S3C_MSCOCTRL_ENVID_M_C_SET                    (1 << 0)
++#define S3C_MSPRCTRL_BC_SEL_FIELD                     (0 << 10)
++#define S3C_MSPRCTRL_BC_SEL_FRAME                     (1 << 10)
++#define S3C_MSPRCTRL_BUFFER_INI_0                     (0 << 8)
++#define S3C_MSPRCTRL_BUFFER_INI_1                     (1 << 8)
++#define S3C_MSPRCTRL_TRG_MODE_SOFT                    (0 << 7)
++#define S3C_MSPRCTRL_TRG_MODE_HARD                    (1 << 7)
++#define S3C_MSPRCTRL_ORDER422_M_P_YCBYCR              (0 << 4)
++#define S3C_MSPRCTRL_ORDER422_M_P_YCRYCB              (1 << 4)
++#define S3C_MSPRCTRL_ORDER422_M_P_CBYCRY              (2 << 4)
++#define S3C_MSPRCTRL_ORDER422_M_P_CRYCBY              (3 << 4)
++#define S3C_MSPRCTRL_SEL_DMA_CAM_P_EXTCAM             (0 << 3)
++#define S3C_MSPRCTRL_SEL_DMA_CAM_P_MEMORY             (1 << 3)
++#define S3C_MSPRCTRL_INFORMAT_M_P_420                 (0 << 1)
++#define S3C_MSPRCTRL_INFORMAT_M_P_422                 (1 << 1)
++#define S3C_MSPRCTRL_INFORMAT_M_P_422_INT             (2 << 1)
++#define S3C_MSPRCTRL_INFORMAT_M_P_RGB                 (3 << 1)
++#define S3C_MSPRCTRL_ENVID_M_P_SET                    (1 << 0)
++#endif
++
++/*************************************************************************
++ * Register part
++ ************************************************************************/
++#define S3C_CICOYSA(__x)      S3C_CAMIFREG(0x18 + (__x) * 4)
++#define S3C_CICOCBSA(__x)     S3C_CAMIFREG(0x28 + (__x) * 4)
++#define S3C_CICOCRSA(__x)     S3C_CAMIFREG(0x38 + (__x) * 4)
++#define S3C_CIPRCLRSA(__x)    S3C_CAMIFREG(0x6C + (__x) * 4)
++#define S3C_CIPRYSA(__x)      S3C_CAMIFREG(0x6C + (__x) * 4)
++#define S3C_CIPRCBSA(__x)     S3C_CAMIFREG(0x7C + (__x) * 4)
++#define S3C_CIPRCRSA(__x)     S3C_CAMIFREG(0x8C + (__x) * 4)
++
++#define S3C_CISRCFMT          S3C_CAMIFREG(0x00)
++#define S3C_CIWDOFST          S3C_CAMIFREG(0x04)
++#define S3C_CIGCTRL           S3C_CAMIFREG(0x08)
++#define S3C_CIDOWSFT2         S3C_CAMIFREG(0x14)
++#define S3C_CICOYSA1          S3C_CAMIFREG(0x18)
++#define S3C_CICOYSA2          S3C_CAMIFREG(0x1C)
++#define S3C_CICOYSA3          S3C_CAMIFREG(0x20)
++#define S3C_CICOYSA4          S3C_CAMIFREG(0x24)
++#define S3C_CICOCBSA1         S3C_CAMIFREG(0x28)
++#define S3C_CICOCBSA2         S3C_CAMIFREG(0x2C)
++#define S3C_CICOCBSA3         S3C_CAMIFREG(0x30)
++#define S3C_CICOCBSA4         S3C_CAMIFREG(0x34)
++#define S3C_CICOCRSA1         S3C_CAMIFREG(0x38)
++#define S3C_CICOCRSA2         S3C_CAMIFREG(0x3C)
++#define S3C_CICOCRSA3         S3C_CAMIFREG(0x40)
++#define S3C_CICOCRSA4         S3C_CAMIFREG(0x44)
++#define S3C_CICOTRGFMT                S3C_CAMIFREG(0x48)      /* CODEC target format */
++#define S3C_CICOCTRL          S3C_CAMIFREG(0x4C)      /* CODEC DMA control register */
++#define S3C_CICOSCPRERATIO    S3C_CAMIFREG(0x50)      /* CODEC pre-scaler control register 1 */
++#define S3C_CICOSCPREDST      S3C_CAMIFREG(0x54)      /* CODEC pre-scaler control register 2 */
++#define S3C_CICOSCCTRL                S3C_CAMIFREG(0x58)      /* CODEC main-scaler control */
++#define S3C_CICOTAREA         S3C_CAMIFREG(0x5C)      /* CODEC DMA target area register */
++#define S3C_CICOSTATUS                S3C_CAMIFREG(0x64)      /* CODEC status register */
++
++#if defined (CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define S3C_CIPRCLRSA1                S3C_CAMIFREG(0x6C)      /* RGB 1st frame start address for preview DMA */
++#define S3C_CIPRCLRSA2                S3C_CAMIFREG(0x70)      /* RGB 2nd frame start address for preview DMA */
++#define S3C_CIPRCLRSA3                S3C_CAMIFREG(0x74)      /* RGB 3rd frame start address for preview DMA */
++#define S3C_CIPRCLRSA4                S3C_CAMIFREG(0x78)      /* RGB 4th frame start address for preview DMA */
++#define S3C_CIPRTRGFMT                S3C_CAMIFREG(0x7C)      /* PREVIEW target format register */
++#define S3C_CIPRCTRL          S3C_CAMIFREG(0x80)      /* PREVIEW DMA control register */
++#define S3C_CIPRSCPRERATIO    S3C_CAMIFREG(0x84)      /* PREVIEW pre-scaler control register 1 */
++#define S3C_CIPRSCPREDST      S3C_CAMIFREG(0x88)      /* PREVIEW pre-scaler control register 2 */
++#define S3C_CIPRSCCTRL                S3C_CAMIFREG(0x8C)      /* PREVIEW main-scaler control register */
++#define S3C_CIPRTAREA         S3C_CAMIFREG(0x90)      /* PREVIEW DMA target area register */
++#define S3C_CIPRSTATUS                S3C_CAMIFREG(0x98)      /* PREVIEW status register */
++#define S3C_CIIMGCPT          S3C_CAMIFREG(0xA0)      /* image capture enable register */
++#define S3C_CICOCPTSEQ                S3C_CAMIFREG(0xA4)      /* CODEC capture sequence register */
++#define S3C_CICOSCOS          S3C_CAMIFREG(0xA8)      /* CODEC scan line offset register */
++#define S3C_CIIMGEFF          S3C_CAMIFREG(0xB0)      /* image effect register */
++#define S3C_CIMSYSA           S3C_CAMIFREG(0xB4)      /* MSDMA Y start address register */
++#define S3C_CIMSCBSA          S3C_CAMIFREG(0xB8)      /* MSDMA CB start address register */
++#define S3C_CIMSCRSA          S3C_CAMIFREG(0xBC)      /* MSDMA CR start address register */
++#define S3C_CIMSYEND          S3C_CAMIFREG(0xC0)      /* MSDMA Y end address register */
++#define S3C_CIMSCBEND         S3C_CAMIFREG(0xC4)      /* MSDMA CB end address register */
++#define S3C_CIMSCREND         S3C_CAMIFREG(0xC8)      /* MSDMA CR end address register */
++#define S3C_CIMSYOFF          S3C_CAMIFREG(0xCC)      /* MSDMA Y offset register */
++#define S3C_CIMSCBOFF         S3C_CAMIFREG(0xD0)      /* MSDMA CB offset register */
++#define S3C_CIMSCROFF         S3C_CAMIFREG(0xD4)      /* MSDMA CR offset register */
++#define S3C_CIMSWIDTH         S3C_CAMIFREG(0xD8)      /* MSDMA source image width register */
++#define S3C_CIMSCTRL          S3C_CAMIFREG(0xDC)      /* MSDMA control register */
++
++#elif defined CONFIG_CPU_S3C6400 || defined CONFIG_CPU_S3C6410
++#define S3C_CIPRYSA1          S3C_CAMIFREG(0x6C)      /* 1st frame start address for preview DMA */
++#define S3C_CIPRYSA2          S3C_CAMIFREG(0x70)      /* 2nd frame start address for preview DMA */
++#define S3C_CIPRYSA3          S3C_CAMIFREG(0x74)      /* 3rd frame start address for preview DMA */
++#define S3C_CIPRYSA4          S3C_CAMIFREG(0x78)      /* 4th frame start address for preview DMA */
++#define S3C_CIPRCBSA1         S3C_CAMIFREG(0x7C)      /* 1st frame start address for preview DMA */
++#define S3C_CIPRCBSA2         S3C_CAMIFREG(0x80)      /* 2nd frame start address for preview DMA */
++#define S3C_CIPRCBSA3         S3C_CAMIFREG(0x84)      /* 3rd frame start address for preview DMA */
++#define S3C_CIPRCBSA4         S3C_CAMIFREG(0x88)      /* 4th frame start address for preview DMA */
++#define S3C_CIPRCRSA1         S3C_CAMIFREG(0x8C)      /* 1st frame start address for preview DMA */
++#define S3C_CIPRCRSA2         S3C_CAMIFREG(0x90)      /* 2nd frame start address for preview DMA */
++#define S3C_CIPRCRSA3         S3C_CAMIFREG(0x94)      /* 3rd frame start address for preview DMA */
++#define S3C_CIPRCRSA4         S3C_CAMIFREG(0x98)      /* 4th frame start address for preview DMA */
++#define S3C_CIPRTRGFMT                S3C_CAMIFREG(0x9C)      /* PREVIEW target format register */
++#define S3C_CIPRCTRL          S3C_CAMIFREG(0xA0)      /* PREVIEW DMA control register */
++#define S3C_CIPRSCPRERATIO    S3C_CAMIFREG(0xA4)      /* PREVIEW pre-scaler control register 1 */
++#define S3C_CIPRSCPREDST      S3C_CAMIFREG(0xA8)      /* PREVIEW pre-scaler control register 2 */
++#define S3C_CIPRSCCTRL                S3C_CAMIFREG(0xAC)      /* PREVIEW main-scaler control register */
++#define S3C_CIPRTAREA         S3C_CAMIFREG(0xB0)      /* PREVIEW DMA target area register */
++#define S3C_CIPRSTATUS                S3C_CAMIFREG(0xB8)      /* PREVIEW status register */
++#define S3C_CIIMGCPT          S3C_CAMIFREG(0xC0)      /* image capture enable register */
++#define S3C_CICOCPTSEQ                S3C_CAMIFREG(0xC4)      /* CODEC capture sequence register */
++#define S3C_CIIMGEFF          S3C_CAMIFREG(0xD0)      /* image effect register */
++#define S3C_MSCOY0SA          S3C_CAMIFREG(0xD4)      /* MSDMA for CODEC Y start address register */
++#define S3C_MSCOCB0SA         S3C_CAMIFREG(0xD8)      /* MSDMA for CODEC CB start address register */
++#define S3C_MSCOCR0SA         S3C_CAMIFREG(0xDC)      /* MSDMA for CODEC CR start address register */
++#define S3C_MSCOY0END         S3C_CAMIFREG(0xE0)      /* MSDMA for CODEC Y end address register */
++#define S3C_MSCOCB0END                S3C_CAMIFREG(0xE4)      /* MSDMA for CODEC CB end address register */
++#define S3C_MSCOCR0END                S3C_CAMIFREG(0xE8)      /* MSDMA for CODEC CR end address register */
++#define S3C_MSCOYOFF          S3C_CAMIFREG(0xEC)      /* MSDMA for CODEC Y offset register */
++#define S3C_MSCOCBOFF         S3C_CAMIFREG(0xF0)      /* MSDMA for CODEC CB offset register */
++#define S3C_MSCOCROFF         S3C_CAMIFREG(0xF4)      /* MSDMA for CODEC CR offset register */
++#define S3C_MSCOWIDTH         S3C_CAMIFREG(0xF8)      /* MSDMA for CODEC source image width register */
++#define S3C_MSCOCTRL          S3C_CAMIFREG(0xFC)      /* MSDMA for CODEC control register */
++#define S3C_MSPRY0SA          S3C_CAMIFREG(0x100)     /* MSDMA for PREVIEW Y0 start address register */
++#define S3C_MSPRCB0SA         S3C_CAMIFREG(0x104)     /* MSDMA for PREVIEW CB0 start address register */
++#define S3C_MSPRCR0SA         S3C_CAMIFREG(0x108)     /* MSDMA for PREVIEW CR0 start address register */
++#define S3C_MSPRY0END         S3C_CAMIFREG(0x10C)     /* MSDMA for PREVIEW Y0 end address register */
++#define S3C_MSPRCB0END                S3C_CAMIFREG(0x110)     /* MSDMA for PREVIEW CB0 end address register */
++#define S3C_MSPRCR0END                S3C_CAMIFREG(0x114)     /* MSDMA for PREVIEW CR0 end address register */
++#define S3C_MSPRYOFF          S3C_CAMIFREG(0x118)     /* MSDMA for PREVIEW Y offset register */
++#define S3C_MSPRCBOFF         S3C_CAMIFREG(0x11C)     /* MSDMA for PREVIEW CB offset register */
++#define S3C_MSPRCROFF         S3C_CAMIFREG(0x120)     /* MSDMA for PREVIEW CR offset register */
++#define S3C_MSPRWIDTH         S3C_CAMIFREG(0x124)     /* MSDMA for PREVIEW source image width register */
++#define S3C_CIMSCTRL          S3C_CAMIFREG(0x128)     /* MSDMA for PREVIEW control register */
++#define S3C_CICOSCOSY         S3C_CAMIFREG(0x12C)     /* CODEC scan line Y offset register */
++#define S3C_CICOSCOSCB                S3C_CAMIFREG(0x130)     /* CODEC scan line CB offset register */
++#define S3C_CICOSCOSCR                S3C_CAMIFREG(0x134)     /* CODEC scan line CR offset register */
++#define S3C_CIPRSCOSY         S3C_CAMIFREG(0x138)     /* PREVIEW scan line Y offset register */
++#define S3C_CIPRSCOSCB                S3C_CAMIFREG(0x13C)     /* PREVIEW scan line CB offset register */
++#define S3C_CIPRSCOSCR                S3C_CAMIFREG(0x140)     /* PREVIEW scan line CR offset register */
++#endif
++
++#endif /* ___ASM_ARCH_REGS_CAMIF_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-clock.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-clock.h      2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-clock.h   2009-05-10 22:27:59.000000000 +0200
+@@ -32,6 +32,7 @@
+ #define S3C_HCLK_GATE         S3C_CLKREG(0x30)
+ #define S3C_PCLK_GATE         S3C_CLKREG(0x34)
+ #define S3C_SCLK_GATE         S3C_CLKREG(0x38)
++#define S3C_MEM0_GATE         S3C_CLKREG(0x3C)
+ /* CLKDIV0 */
+ #define S3C6400_CLKDIV0_MFC_MASK      (0xf << 28)
+@@ -88,10 +89,10 @@
+ /* HCLK GATE Registers */
+ #define S3C_CLKCON_HCLK_BUS   (1<<30)
+-#define S3C_CLKCON_HCLK_SECUR (1<<29)
+-#define S3C_CLKCON_HCLK_SDMA1 (1<<28)
+-#define S3C_CLKCON_HCLK_SDMA2 (1<<27)
+-#define S3C_CLKCON_HCLK_UHOST (1<<26)
++#define S3C_CLKCON_HCLK_UHOST (1<<29)
++#define S3C_CLKCON_HCLK_SECUR (1<<28)
++#define S3C_CLKCON_HCLK_SDMA1 (1<<27)
++#define S3C_CLKCON_HCLK_SDMA0 (1<<26)
+ #define S3C_CLKCON_HCLK_IROM  (1<<25)
+ #define S3C_CLKCON_HCLK_DDR1  (1<<24)
+ #define S3C_CLKCON_HCLK_DDR0  (1<<23)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h    2009-05-10 22:27:59.000000000 +0200
+@@ -13,23 +13,175 @@
+ /* Base addresses for each of the banks */
+-#define S3C64XX_GPA_BASE      (S3C64XX_VA_GPIO + 0x0000)
+-#define S3C64XX_GPB_BASE      (S3C64XX_VA_GPIO + 0x0020)
+-#define S3C64XX_GPC_BASE      (S3C64XX_VA_GPIO + 0x0040)
+-#define S3C64XX_GPD_BASE      (S3C64XX_VA_GPIO + 0x0060)
+-#define S3C64XX_GPE_BASE      (S3C64XX_VA_GPIO + 0x0080)
+-#define S3C64XX_GPF_BASE      (S3C64XX_VA_GPIO + 0x00A0)
+-#define S3C64XX_GPG_BASE      (S3C64XX_VA_GPIO + 0x00C0)
+-#define S3C64XX_GPH_BASE      (S3C64XX_VA_GPIO + 0x00E0)
+-#define S3C64XX_GPI_BASE      (S3C64XX_VA_GPIO + 0x0100)
+-#define S3C64XX_GPJ_BASE      (S3C64XX_VA_GPIO + 0x0120)
+-#define S3C64XX_GPK_BASE      (S3C64XX_VA_GPIO + 0x0800)
+-#define S3C64XX_GPL_BASE      (S3C64XX_VA_GPIO + 0x0810)
+-#define S3C64XX_GPM_BASE      (S3C64XX_VA_GPIO + 0x0820)
+-#define S3C64XX_GPN_BASE      (S3C64XX_VA_GPIO + 0x0830)
+-#define S3C64XX_GPO_BASE      (S3C64XX_VA_GPIO + 0x0140)
+-#define S3C64XX_GPP_BASE      (S3C64XX_VA_GPIO + 0x0160)
+-#define S3C64XX_GPQ_BASE      (S3C64XX_VA_GPIO + 0x0180)
++#define S3C64XX_GPIOREG(reg)  (S3C64XX_VA_GPIO + (reg))
++
++#define S3C64XX_GPA_BASE      S3C64XX_GPIOREG(0x0000)
++#define S3C64XX_GPB_BASE      S3C64XX_GPIOREG(0x0020)
++#define S3C64XX_GPC_BASE      S3C64XX_GPIOREG(0x0040)
++#define S3C64XX_GPD_BASE      S3C64XX_GPIOREG(0x0060)
++#define S3C64XX_GPE_BASE      S3C64XX_GPIOREG(0x0080)
++#define S3C64XX_GPF_BASE      S3C64XX_GPIOREG(0x00A0)
++#define S3C64XX_GPG_BASE      S3C64XX_GPIOREG(0x00C0)
++#define S3C64XX_GPH_BASE      S3C64XX_GPIOREG(0x00E0)
++#define S3C64XX_GPI_BASE      S3C64XX_GPIOREG(0x0100)
++#define S3C64XX_GPJ_BASE      S3C64XX_GPIOREG(0x0120)
++#define S3C64XX_GPK_BASE      S3C64XX_GPIOREG(0x0800)
++#define S3C64XX_GPL_BASE      S3C64XX_GPIOREG(0x0810)
++#define S3C64XX_GPM_BASE      S3C64XX_GPIOREG(0x0820)
++#define S3C64XX_GPN_BASE      S3C64XX_GPIOREG(0x0830)
++#define S3C64XX_GPO_BASE      S3C64XX_GPIOREG(0x0140)
++#define S3C64XX_GPP_BASE      S3C64XX_GPIOREG(0x0160)
++#define S3C64XX_GPQ_BASE      S3C64XX_GPIOREG(0x0180)
++
++/* SPCON */
++
++#define S3C64XX_SPCON         S3C64XX_GPIOREG(0x1A0)
++
++#define S3C64XX_SPCON_DRVCON_CAM_MASK         (0x3 << 30)
++#define S3C64XX_SPCON_DRVCON_CAM_SHIFT                (30)
++#define S3C64XX_SPCON_DRVCON_CAM_2mA          (0x0 << 30)
++#define S3C64XX_SPCON_DRVCON_CAM_4mA          (0x1 << 30)
++#define S3C64XX_SPCON_DRVCON_CAM_7mA          (0x2 << 30)
++#define S3C64XX_SPCON_DRVCON_CAM_9mA          (0x3 << 30)
++
++#define S3C64XX_SPCON_DRVCON_HSSPI_MASK               (0x3 << 28)
++#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT      (28)
++#define S3C64XX_SPCON_DRVCON_HSSPI_2mA                (0x0 << 28)
++#define S3C64XX_SPCON_DRVCON_HSSPI_4mA                (0x1 << 28)
++#define S3C64XX_SPCON_DRVCON_HSSPI_7mA                (0x2 << 28)
++#define S3C64XX_SPCON_DRVCON_HSSPI_9mA                (0x3 << 28)
++
++#define S3C64XX_SPCON_DRVCON_HSMMC_MASK               (0x3 << 26)
++#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT      (26)
++#define S3C64XX_SPCON_DRVCON_HSMMC_2mA                (0x0 << 26)
++#define S3C64XX_SPCON_DRVCON_HSMMC_4mA                (0x1 << 26)
++#define S3C64XX_SPCON_DRVCON_HSMMC_7mA                (0x2 << 26)
++#define S3C64XX_SPCON_DRVCON_HSMMC_9mA                (0x3 << 26)
++
++#define S3C64XX_SPCON_DRVCON_LCD_MASK         (0x3 << 24)
++#define S3C64XX_SPCON_DRVCON_LCD_SHIFT                (24)
++#define S3C64XX_SPCON_DRVCON_LCD_2mA          (0x0 << 24)
++#define S3C64XX_SPCON_DRVCON_LCD_4mA          (0x1 << 24)
++#define S3C64XX_SPCON_DRVCON_LCD_7mA          (0x2 << 24)
++#define S3C64XX_SPCON_DRVCON_LCD_9mA          (0x3 << 24)
++
++#define S3C64XX_SPCON_DRVCON_MODEM_MASK               (0x3 << 22)
++#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT      (22)
++#define S3C64XX_SPCON_DRVCON_MODEM_2mA                (0x0 << 22)
++#define S3C64XX_SPCON_DRVCON_MODEM_4mA                (0x1 << 22)
++#define S3C64XX_SPCON_DRVCON_MODEM_7mA                (0x2 << 22)
++#define S3C64XX_SPCON_DRVCON_MODEM_9mA                (0x3 << 22)
++
++#define S3C64XX_SPCON_nRSTOUT_OEN             (1 << 21)
++
++#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK     (0x3 << 18)
++#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT    (18)
++#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA      (0x0 << 18)
++#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA      (0x1 << 18)
++#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA      (0x2 << 18)
++#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA      (0x3 << 18)
++
++#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK               (0x3 << 16)
++#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT      (16)
++#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED   (0x0 << 16)
++#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN               (0x1 << 16)
++#define S3C64XX_SPCON_MEM1_DQS_PUD_UP         (0x2 << 16)
++
++#define S3C64XX_SPCON_MEM1_D_PUD1_MASK                (0x3 << 14)
++#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT               (14)
++#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED    (0x0 << 14)
++#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN                (0x1 << 14)
++#define S3C64XX_SPCON_MEM1_D_PUD1_UP          (0x2 << 14)
++
++#define S3C64XX_SPCON_MEM1_D_PUD0_MASK                (0x3 << 12)
++#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT               (12)
++#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED    (0x0 << 12)
++#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN                (0x1 << 12)
++#define S3C64XX_SPCON_MEM1_D_PUD0_UP          (0x2 << 12)
++
++#define S3C64XX_SPCON_MEM0_D_PUD_MASK         (0x3 << 8)
++#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT                (8)
++#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED     (0x0 << 8)
++#define S3C64XX_SPCON_MEM0_D_PUD_DOWN         (0x1 << 8)
++#define S3C64XX_SPCON_MEM0_D_PUD_UP           (0x2 << 8)
++
++#define S3C64XX_SPCON_USBH_DMPD                       (1 << 7)
++#define S3C64XX_SPCON_USBH_DPPD                       (1 << 6)
++#define S3C64XX_SPCON_USBH_PUSW2              (1 << 5)
++#define S3C64XX_SPCON_USBH_PUSW1              (1 << 4)
++#define S3C64XX_SPCON_USBH_SUSPND             (1 << 3)
++
++#define S3C64XX_SPCON_LCD_SEL_MASK            (0x3 << 0)
++#define S3C64XX_SPCON_LCD_SEL_SHIFT           (0)
++#define S3C64XX_SPCON_LCD_SEL_HOST            (0x0 << 0)
++#define S3C64XX_SPCON_LCD_SEL_RGB             (0x1 << 0)
++#define S3C64XX_SPCON_LCD_SEL_606_656         (0x2 << 0)
++
++
++/* External interrupt registers */
++
++#define S3C64XX_EINT12CON     S3C64XX_GPIOREG(0x200)
++#define S3C64XX_EINT34CON     S3C64XX_GPIOREG(0x204)
++#define S3C64XX_EINT56CON     S3C64XX_GPIOREG(0x208)
++#define S3C64XX_EINT78CON     S3C64XX_GPIOREG(0x20C)
++#define S3C64XX_EINT9CON      S3C64XX_GPIOREG(0x210)
++
++#define S3C64XX_EINT12FLTCON  S3C64XX_GPIOREG(0x220)
++#define S3C64XX_EINT34FLTCON  S3C64XX_GPIOREG(0x224)
++#define S3C64XX_EINT56FLTCON  S3C64XX_GPIOREG(0x228)
++#define S3C64XX_EINT78FLTCON  S3C64XX_GPIOREG(0x22C)
++#define S3C64XX_EINT9FLTCON   S3C64XX_GPIOREG(0x230)
++
++#define S3C64XX_EINT12MASK    S3C64XX_GPIOREG(0x240)
++#define S3C64XX_EINT34MASK    S3C64XX_GPIOREG(0x244)
++#define S3C64XX_EINT56MASK    S3C64XX_GPIOREG(0x248)
++#define S3C64XX_EINT78MASK    S3C64XX_GPIOREG(0x24C)
++#define S3C64XX_EINT9MASK     S3C64XX_GPIOREG(0x250)
++
++#define S3C64XX_EINT12PEND    S3C64XX_GPIOREG(0x260)
++#define S3C64XX_EINT34PEND    S3C64XX_GPIOREG(0x264)
++#define S3C64XX_EINT56PEND    S3C64XX_GPIOREG(0x268)
++#define S3C64XX_EINT78PEND    S3C64XX_GPIOREG(0x26C)
++#define S3C64XX_EINT9PEND     S3C64XX_GPIOREG(0x270)
++
++#define S3C64XX_PRIORITY      S3C64XX_GPIOREG(0x280)
++#define S3C64XX_PRIORITY_ARB(x)       (1 << (x))
++
++#define S3C64XX_SERVICE               S3C64XX_GPIOREG(0x284)
++#define S3C64XX_SERVICEPEND   S3C64XX_GPIOREG(0x288)
++
++#define S3C64XX_EINT0CON0     S3C64XX_GPIOREG(0x900)
++#define S3C64XX_EINT0CON1     S3C64XX_GPIOREG(0x904)
++#define S3C64XX_EINT0FLTCON0  S3C64XX_GPIOREG(0x910)
++#define S3C64XX_EINT0FLTCON1  S3C64XX_GPIOREG(0x914)
++#define S3C64XX_EINT0FLTCON2  S3C64XX_GPIOREG(0x918)
++#define S3C64XX_EINT0FLTCON3  S3C64XX_GPIOREG(0x91C)
++
++#define S3C64XX_EINT0MASK     S3C64XX_GPIOREG(0x920)
++#define S3C64XX_EINT0PEND     S3C64XX_GPIOREG(0x924)
++
++/* GPIO sleep configuration */
++
++#define S3C64XX_SPCONSLP      S3C64XX_GPIOREG(0x880)
++
++#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14)
++#define S3C64XX_SPCONSLP_CKE1INIT     (1 << 5)
++
++#define S3C64XX_SPCONSLP_RSTOUT_MASK  (0x3 << 12)
++#define S3C64XX_SPCONSLP_RSTOUT_OUT0  (0x0 << 12)
++#define S3C64XX_SPCONSLP_RSTOUT_OUT1  (0x1 << 12)
++#define S3C64XX_SPCONSLP_RSTOUT_HIZ   (0x2 << 12)
++
++#define S3C64XX_SPCONSLP_KPCOL_MASK   (0x3 << 0)
++#define S3C64XX_SPCONSLP_KPCOL_OUT0   (0x0 << 0)
++#define S3C64XX_SPCONSLP_KPCOL_OUT1   (0x1 << 0)
++#define S3C64XX_SPCONSLP_KPCOL_INP    (0x2 << 0)
++
++
++#define S3C64XX_SLPEN         S3C64XX_GPIOREG(0x930)
++
++#define S3C64XX_SLPEN_USE_xSLP                (1 << 0)
++#define S3C64XX_SLPEN_CFG_BYSLPEN     (1 << 1)
+ #endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,25 @@
++/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX - GPIO memory port register definitions
++ */
++
++#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
++#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
++
++#define S3C64XX_MEM0CONSTOP   S3C64XX_GPIOREG(0x1B0)
++#define S3C64XX_MEM1CONSTOP   S3C64XX_GPIOREG(0x1B4)
++
++#define S3C64XX_MEM0CONSLP0   S3C64XX_GPIOREG(0x1C0)
++#define S3C64XX_MEM0CONSLP1   S3C64XX_GPIOREG(0x1C4)
++#define S3C64XX_MEM1CONSLP    S3C64XX_GPIOREG(0x1C8)
++
++#define S3C64XX_MEM0DRVCON    S3C64XX_GPIOREG(0x1D0)
++#define S3C64XX_MEM1DRVCON    S3C64XX_GPIOREG(0x1D4)
++
++#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-modem.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-modem.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-modem.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,31 @@
++/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      http://armlinux.simtec.co.uk/
++ *      Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C64XX - modem block registers
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#ifndef __PLAT_S3C64XX_REGS_MODEM_H
++#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
++
++#define S3C64XX_MODEMREG(x)   (S3C64XX_VA_MODEM + (x))
++
++#define S3C64XX_MODEM_INT2AP                  S3C64XX_MODEMREG(0x0)
++#define S3C64XX_MODEM_INT2MODEM                       S3C64XX_MODEMREG(0x4)
++#define S3C64XX_MODEM_MIFCON                  S3C64XX_MODEMREG(0x8)
++#define S3C64XX_MODEM_MIFPCON                 S3C64XX_MODEMREG(0xC)
++#define S3C64XX_MODEM_INTCLR                  S3C64XX_MODEMREG(0x10)
++#define S3C64XX_MODEM_DMA_TXADDR              S3C64XX_MODEMREG(0x14)
++#define S3C64XX_MODEM_DMA_RXADDR              S3C64XX_MODEMREG(0x18)
++
++#define MIFPCON_INT2M_LEVEL                   (1 << 4)
++#define MIFPCON_LCD_BYPASS                    (1 << 3)
++
++#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,116 @@
++/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      http://armlinux.simtec.co.uk/
++ *      Ben Dooks <ben@simtec.co.uk>
++ *
++ * S3C64XX - syscon power and sleep control registers
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
++#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
++
++#define S3C64XX_PWR_CFG                               S3C_SYSREG(0x804)
++
++#define S3C64XX_PWRCFG_OSC_OTG_DISABLE                (1 << 17)
++#define S3C64XX_PWRCFG_MMC2_DISABLE           (1 << 16)
++#define S3C64XX_PWRCFG_MMC1_DISABLE           (1 << 15)
++#define S3C64XX_PWRCFG_MMC0_DISABLE           (1 << 14)
++#define S3C64XX_PWRCFG_HSI_DISABLE            (1 << 13)
++#define S3C64XX_PWRCFG_TS_DISABLE             (1 << 12)
++#define S3C64XX_PWRCFG_RTC_TICK_DISABLE               (1 << 11)
++#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE      (1 << 10)
++#define S3C64XX_PWRCFG_MSM_DISABLE            (1 << 9)
++#define S3C64XX_PWRCFG_KEY_DISABLE            (1 << 8)
++#define S3C64XX_PWRCFG_BATF_DISABLE           (1 << 7)
++
++#define S3C64XX_PWRCFG_CFG_WFI_MASK           (0x3 << 5)
++#define S3C64XX_PWRCFG_CFG_WFI_SHIFT          (5)
++#define S3C64XX_PWRCFG_CFG_WFI_IGNORE         (0x0 << 5)
++#define S3C64XX_PWRCFG_CFG_WFI_IDLE           (0x1 << 5)
++#define S3C64XX_PWRCFG_CFG_WFI_STOP           (0x2 << 5)
++#define S3C64XX_PWRCFG_CFG_WFI_SLEEP          (0x3 << 5)
++
++#define S3C64XX_PWRCFG_CFG_BATFLT_MASK                (0x3 << 3)
++#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT               (3)
++#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE      (0x0 << 3)
++#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ         (0x1 << 3)
++#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP               (0x3 << 3)
++
++#define S3C64XX_PWRCFG_CFG_BAT_WAKE           (1 << 2)
++#define S3C64XX_PWRCFG_OSC27_EN                       (1 << 0)
++
++#define S3C64XX_EINT_MASK                     S3C_SYSREG(0x808)
++
++#define S3C64XX_NORMAL_CFG                    S3C_SYSREG(0x810)
++
++#define S3C64XX_NORMALCFG_IROM_ON             (1 << 30)
++#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON               (1 << 16)
++#define S3C64XX_NORMALCFG_DOMAIN_S_ON         (1 << 15)
++#define S3C64XX_NORMALCFG_DOMAIN_F_ON         (1 << 14)
++#define S3C64XX_NORMALCFG_DOMAIN_P_ON         (1 << 13)
++#define S3C64XX_NORMALCFG_DOMAIN_I_ON         (1 << 12)
++#define S3C64XX_NORMALCFG_DOMAIN_G_ON         (1 << 10)
++#define S3C64XX_NORMALCFG_DOMAIN_V_ON         (1 << 9)
++
++#define S3C64XX_STOP_CFG                      S3C_SYSREG(0x814)
++
++#define S3C64XX_STOPCFG_MEMORY_ARM_ON         (1 << 29)
++#define S3C64XX_STOPCFG_TOP_MEMORY_ON         (1 << 20)
++#define S3C64XX_STOPCFG_ARM_LOGIC_ON          (1 << 17)
++#define S3C64XX_STOPCFG_TOP_LOGIC_ON          (1 << 8)
++#define S3C64XX_STOPCFG_OSC_EN                        (1 << 0)
++
++#define S3C64XX_SLEEP_CFG                     S3C_SYSREG(0x818)
++
++#define S3C64XX_SLEEPCFG_OSC_EN                       (1 << 0)
++
++#define S3C64XX_STOP_MEM_CFG                  S3C_SYSREG(0x81c)
++
++#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN     (1 << 6)
++#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN      (1 << 5)
++#define S3C64XX_STOPMEMCFG_OTG_RETAIN         (1 << 4)
++#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN               (1 << 3)
++#define S3C64XX_STOPMEMCFG_IROM_RETAIN                (1 << 2)
++#define S3C64XX_STOPMEMCFG_IRDA_RETAIN                (1 << 1)
++#define S3C64XX_STOPMEMCFG_NFCON_RETAIN               (1 << 0)
++
++#define S3C64XX_OSC_STABLE                    S3C_SYSREG(0x824)
++#define S3C64XX_PWR_STABLE                    S3C_SYSREG(0x828)
++
++#define S3C64XX_WAKEUP_STAT                   S3C_SYSREG(0x908)
++
++#define S3C64XX_WAKEUPSTAT_MMC2                       (1 << 11)
++#define S3C64XX_WAKEUPSTAT_MMC1                       (1 << 10)
++#define S3C64XX_WAKEUPSTAT_MMC0                       (1 << 9)
++#define S3C64XX_WAKEUPSTAT_HSI                        (1 << 8)
++#define S3C64XX_WAKEUPSTAT_BATFLT             (1 << 6)
++#define S3C64XX_WAKEUPSTAT_MSM                        (1 << 5)
++#define S3C64XX_WAKEUPSTAT_KEY                        (1 << 4)
++#define S3C64XX_WAKEUPSTAT_TS                 (1 << 3)
++#define S3C64XX_WAKEUPSTAT_RTC_TICK           (1 << 2)
++#define S3C64XX_WAKEUPSTAT_RTC_ALARM          (1 << 1)
++#define S3C64XX_WAKEUPSTAT_EINT                       (1 << 0)
++
++#define S3C64XX_BLK_PWR_STAT                  S3C_SYSREG(0x90c)
++
++#define S3C64XX_BLKPWRSTAT_G                  (1 << 7)
++#define S3C64XX_BLKPWRSTAT_ETM                        (1 << 6)
++#define S3C64XX_BLKPWRSTAT_S                  (1 << 5)
++#define S3C64XX_BLKPWRSTAT_F                  (1 << 4)
++#define S3C64XX_BLKPWRSTAT_P                  (1 << 3)
++#define S3C64XX_BLKPWRSTAT_I                  (1 << 2)
++#define S3C64XX_BLKPWRSTAT_V                  (1 << 1)
++#define S3C64XX_BLKPWRSTAT_TOP                        (1 << 0)
++
++#define S3C64XX_INFORM0                               S3C_SYSREG(0xA00)
++#define S3C64XX_INFORM1                               S3C_SYSREG(0xA04)
++#define S3C64XX_INFORM2                               S3C_SYSREG(0xA08)
++#define S3C64XX_INFORM3                               S3C_SYSREG(0xA0C)
++
++#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-sys.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/regs-sys.h        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/regs-sys.h     2009-05-10 22:27:59.000000000 +0200
+@@ -17,6 +17,10 @@
+ #define S3C_SYSREG(x)         (S3C_VA_SYS + (x))
++#define S3C64XX_AHB_CON0      S3C_SYSREG(0x100)
++#define S3C64XX_AHB_CON1      S3C_SYSREG(0x104)
++#define S3C64XX_AHB_CON2      S3C_SYSREG(0x108)
++
+ #define S3C64XX_OTHERS                S3C_SYSREG(0x900)
+ #define S3C64XX_OTHERS_USBMASK        (1 << 16)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/tzic-sp890.h linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/tzic-sp890.h
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/include/plat/tzic-sp890.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/include/plat/tzic-sp890.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,21 @@
++#ifndef __S3C64XX_TZIC_SP890_H__
++#define __S3C64XX_TZIC_SP890_H__
++
++
++#define S3C64XX_VA_TZIC0_FIQ_STATUS (S3C_VA_TZIC0 + SP890_TZIC_FIQSTATUS)
++#define S3C64XX_VA_TZIC0_RAWINTR (S3C_VA_TZIC0 + SP890_TZIC_RAWINTR)
++#define S3C64XX_VA_TZIC0_INTSELECT (S3C_VA_TZIC0 + SP890_TZIC_INTSELECT)
++#define S3C64XX_VA_TZIC0_FIQENABLE (S3C_VA_TZIC0 + SP890_TZIC_FIQENABLE)
++#define S3C64XX_VA_TZIC0_FIQENCLEAR (S3C_VA_TZIC0 + SP890_TZIC_FIQENCLEAR)
++#define S3C64XX_VA_TZIC0_FIQBYPASS (S3C_VA_TZIC0 + SP890_TZIC_FIQBYPASS)
++#define S3C64XX_VA_TZIC0_FPROTECTION (S3C_VA_TZIC0 + SP890_TZIC_PROTECTION)
++#define S3C64XX_VA_TZIC0_LOCK (S3C_VA_TZIC0 + SP890_TZIC_LOCK)
++#define S3C64XX_VA_TZIC0_LOCKSTATUS (S3C_VA_TZIC0 + SP890_TZIC_LOCKSTATUS)
++#define S3C64XX_VA_TZIC0_ITCR (S3C_VA_TZIC0 + SP890_TZIC_ITCR)
++#define S3C64XX_VA_TZIC0_ITIP1 (S3C_VA_TZIC0 + SP890_TZIC_ITIP1)
++#define S3C64XX_VA_TZIC0_ITIP2 (S3C_VA_TZIC0 + SP890_TZIC_ITIP2)
++#define S3C64XX_VA_TZIC0_ITOP1 (S3C_VA_TZIC0 + SP890_TZIC_ITOP1)
++#define S3C64XX_VA_TZIC0_ITOP2 (S3C_VA_TZIC0 + SP890_TZIC_ITOP2)
++#define S3C64XX_VA_TZIC0_PERIPHIDO (S3C_VA_TZIC0 + SP890_TZIC_PERIPHIDO)
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq.c  2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq.c       2009-05-10 22:27:59.000000000 +0200
+@@ -14,12 +14,14 @@
+ #include <linux/kernel.h>
+ #include <linux/interrupt.h>
++#include <linux/serial_core.h>
+ #include <linux/irq.h>
+ #include <linux/io.h>
+ #include <asm/hardware/vic.h>
+ #include <mach/map.h>
++#include <plat/regs-serial.h>
+ #include <plat/regs-timer.h>
+ #include <plat/cpu.h>
+@@ -135,9 +137,6 @@
+ }
+ /* UART interrupt registers, not worth adding to seperate include header */
+-#define S3C64XX_UINTP 0x30
+-#define S3C64XX_UINTSP        0x34
+-#define S3C64XX_UINTM 0x38
+ static void s3c_irq_uart_mask(unsigned int irq)
+ {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-eint.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq-eint.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-eint.c     2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq-eint.c  2009-05-10 22:27:59.000000000 +0200
+@@ -14,29 +14,20 @@
+ #include <linux/kernel.h>
+ #include <linux/interrupt.h>
++#include <linux/gpio.h>
+ #include <linux/irq.h>
+ #include <linux/io.h>
++#include <linux/gpio.h>
+ #include <asm/hardware/vic.h>
+ #include <plat/regs-irqtype.h>
++#include <plat/regs-gpio.h>
++#include <plat/gpio-cfg.h>
+ #include <mach/map.h>
+ #include <plat/cpu.h>
+-
+-/* GPIO is 0x7F008xxx, */
+-#define S3C64XX_GPIOREG(x)    (S3C64XX_VA_GPIO + (x))
+-
+-#define S3C64XX_EINT0CON0     S3C64XX_GPIOREG(0x900)
+-#define S3C64XX_EINT0CON1     S3C64XX_GPIOREG(0x904)
+-#define S3C64XX_EINT0FLTCON0  S3C64XX_GPIOREG(0x910)
+-#define S3C64XX_EINT0FLTCON1  S3C64XX_GPIOREG(0x914)
+-#define S3C64XX_EINT0FLTCON2  S3C64XX_GPIOREG(0x918)
+-#define S3C64XX_EINT0FLTCON3  S3C64XX_GPIOREG(0x91C)
+-
+-#define S3C64XX_EINT0MASK     S3C64XX_GPIOREG(0x920)
+-#define S3C64XX_EINT0PEND     S3C64XX_GPIOREG(0x924)
+-
++#include <plat/pm.h>
+ #define eint_offset(irq)      ((irq) - IRQ_EINT(0))
+ #define eint_irq_to_bit(irq)  (1 << eint_offset(irq))
+@@ -55,7 +46,7 @@
+       u32 mask;
+       mask = __raw_readl(S3C64XX_EINT0MASK);
+-      mask |= eint_irq_to_bit(irq);
++      mask &= ~eint_irq_to_bit(irq);
+       __raw_writel(mask, S3C64XX_EINT0MASK);
+ }
+@@ -74,6 +65,7 @@
+ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+ {
+       int offs = eint_offset(irq);
++      int pin;
+       int shift;
+       u32 ctrl, mask;
+       u32 newvalue = 0;
+@@ -125,6 +117,14 @@
+       ctrl |= newvalue << shift;
+       __raw_writel(ctrl, reg);
++      /* set the GPIO pin appropriately */
++
++      if (offs < 23)
++              pin = S3C64XX_GPN(offs);
++      else
++              pin = S3C64XX_GPM(offs - 23);
++
++      s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+       return 0;
+ }
+@@ -135,6 +135,7 @@
+       .mask_ack       = s3c_irq_eint_maskack,
+       .ack            = s3c_irq_eint_ack,
+       .set_type       = s3c_irq_eint_set_type,
++      .set_wake       = s3c_irqext_wake,
+ };
+ /* s3c_irq_demux_eint
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-pm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq-pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/irq-pm.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/irq-pm.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,173 @@
++/* arch/arm/plat-s3c64xx/irq-pm.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX - Interrupt handling Power Management
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/sysdev.h>
++#include <linux/interrupt.h>
++#include <linux/serial_core.h>
++#include <linux/irq.h>
++#include <linux/io.h>
++
++#include <asm/hardware/vic.h>
++
++#include <mach/map.h>
++
++#include <plat/regs-serial.h>
++#include <plat/regs-timer.h>
++#include <plat/regs-gpio.h>
++#include <plat/cpu.h>
++#include <plat/pm.h>
++
++/* We handled all the IRQ types in this code, to save having to make several
++ * small files to handle each different type separately. Having the EINT_GRP
++ * code here shouldn't be as much bloat as the IRQ table space needed when
++ * they are enabled. The added benefit is we ensure that these registers are
++ * in the same state as we suspended.
++ */
++
++static struct sleep_save irq_save[] = {
++      SAVE_ITEM(S3C64XX_PRIORITY),
++      SAVE_ITEM(S3C64XX_EINT0CON0),
++      SAVE_ITEM(S3C64XX_EINT0CON1),
++      SAVE_ITEM(S3C64XX_EINT0FLTCON0),
++      SAVE_ITEM(S3C64XX_EINT0FLTCON1),
++      SAVE_ITEM(S3C64XX_EINT0FLTCON2),
++      SAVE_ITEM(S3C64XX_EINT0FLTCON3),
++      SAVE_ITEM(S3C64XX_EINT0MASK),
++      SAVE_ITEM(S3C64XX_TINT_CSTAT),
++};
++
++static struct irq_grp_save {
++      u32     fltcon;
++      u32     con;
++      u32     mask;
++} eint_grp_save[5];
++
++struct irq_vic_save {
++      u32     int_select;
++      u32     int_enable;
++      u32     soft_int;
++      u32     protect;
++      u32     vect_addr[32];
++      u32     vect_cntl[32];
++};
++
++static struct irq_vic_save irq_pm_vic0_save;
++static struct irq_vic_save irq_pm_vic1_save;
++
++static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
++
++static void s3c64xx_vic_save(void __iomem *base, struct irq_vic_save *save)
++{
++      int v;
++
++      save->int_select = readl(base + VIC_INT_SELECT);
++      save->int_enable = readl(base + VIC_INT_ENABLE);
++      save->soft_int = readl(base + VIC_INT_SOFT);
++      save->protect = readl(base + VIC_PROTECT);
++
++      S3C_PMDBG("%s: select=%08x, enable=%08x, protect=%08x\n", __func__,
++                save->int_select, save->int_enable, save->protect);
++
++      for (v = 0; v < ARRAY_SIZE(save->vect_addr); v++) {
++              save->vect_addr[v] = readl(base + VIC_VECT_ADDR0 + (v * 4));
++              save->vect_cntl[v] = readl(base + VIC_VECT_CNTL0 + (v * 4));
++      }
++}
++
++static void s3c64xx_vic_restore(void __iomem *base, struct irq_vic_save *save)
++{
++      int v;
++
++      writel(save->int_select, base + VIC_INT_SELECT);
++      writel(save->protect, base + VIC_PROTECT);
++
++      /* set the enabled ints and then clear the non-enabled */
++      writel(save->int_enable, base + VIC_INT_ENABLE);
++      writel(~save->int_enable, base + VIC_INT_ENABLE_CLEAR);
++
++      /* and the same for the soft-int register */
++
++      writel(save->soft_int, base + VIC_INT_SOFT);
++      writel(~save->soft_int, base + VIC_INT_SOFT_CLEAR);
++
++      S3C_PMDBG("%s: vic int_enable=%08x\n", __func__, readl(base + VIC_INT_ENABLE));
++
++      for (v = 0; v < ARRAY_SIZE(save->vect_addr); v++) {
++              writel(save->vect_addr[v], base + VIC_VECT_ADDR0 + (v * 4));
++              writel(save->vect_cntl[v], base + VIC_VECT_CNTL0 + (v * 4));
++      }
++}
++
++static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
++{
++      struct irq_grp_save *grp = eint_grp_save;
++      int i;
++
++      S3C_PMDBG("%s: suspending IRQs\n", __func__);
++
++      s3c64xx_vic_save(S3C_VA_VIC0, &irq_pm_vic0_save);
++      s3c64xx_vic_save(S3C_VA_VIC1, &irq_pm_vic1_save);
++
++      s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
++
++      for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
++              irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
++
++      for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
++              grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
++              grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
++              grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
++      }
++
++      return 0;
++}
++
++static int s3c64xx_irq_pm_resume(struct sys_device *dev)
++{
++      struct irq_grp_save *grp = eint_grp_save;
++      int i;
++
++      S3C_PMDBG("%s: resuming IRQs\n", __func__);
++
++      s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
++
++      s3c64xx_vic_restore(S3C_VA_VIC0, &irq_pm_vic0_save);
++      s3c64xx_vic_restore(S3C_VA_VIC1, &irq_pm_vic1_save);
++
++      for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
++              __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
++
++      for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
++              __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
++              __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
++              __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
++      }
++
++      S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
++      return 0;
++}
++
++static struct sysdev_driver s3c64xx_irq_driver = {
++      .suspend = s3c64xx_irq_pm_suspend,
++      .resume  = s3c64xx_irq_pm_resume,
++};
++
++static int __init s3c64xx_irq_pm_init(void)
++{
++      return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
++}
++
++arch_initcall(s3c64xx_irq_pm_init);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/Kconfig linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/Kconfig
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/Kconfig        2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/Kconfig     2009-05-10 22:27:59.000000000 +0200
+@@ -19,6 +19,8 @@
+       select S3C_GPIO_PULL_UPDOWN
+       select S3C_GPIO_CFG_S3C24XX
+       select S3C_GPIO_CFG_S3C64XX
++      select USB_ARCH_HAS_OHCI
++      select S3C64XX_SETUP_USBOTG
+       help
+         Base platform code for any Samsung S3C64XX device
+@@ -38,6 +40,10 @@
+         Common clock support code for the S3C6400 that is shared
+         by other CPUs in the series, such as the S3C6410.
++config S3C64XX_DMA
++      bool "S3C64XX DMA"
++      select S3C_DMA
++
+ # platform specific device setup
+ config S3C64XX_SETUP_I2C0
+@@ -59,4 +65,10 @@
+       help
+         Common setup code for S3C64XX with an 24bpp RGB display helper.
++config S3C64XX_SETUP_USBOTG
++      bool
++      help
++        Common setup code for S3C64XX with USB OTG
++
++
+ endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/Makefile linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/Makefile
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/Makefile       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/Makefile    2009-05-10 22:27:59.000000000 +0200
+@@ -24,8 +24,22 @@
+ obj-$(CONFIG_CPU_S3C6400_INIT)        += s3c6400-init.o
+ obj-$(CONFIG_CPU_S3C6400_CLOCK)       += s3c6400-clock.o
++# DMA support
++
++obj-$(CONFIG_S3C64XX_DMA)     += dma.o
++
++# PM support
++
++obj-$(CONFIG_PM)              += pm.o
++obj-$(CONFIG_PM)              += sleep.o
++obj-$(CONFIG_PM)              += irq-pm.o
++
++obj-$(CONFIG_CPU_FREQ_S3C64XX)        += cpufreq.o
++
+ # Device setup
+ obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+ obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+ obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
++obj-$(CONFIG_S3C64XX_SETUP_USBOTG) += dev-usbgadget.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/pm.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/pm.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/pm.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/pm.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,177 @@
++/* linux/arch/arm/plat-s3c64xx/pm.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX CPU PM support.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/init.h>
++#include <linux/suspend.h>
++#include <linux/serial_core.h>
++#include <linux/io.h>
++
++#include <mach/map.h>
++
++#include <plat/pm.h>
++#include <plat/regs-sys.h>
++#include <plat/regs-gpio.h>
++#include <plat/regs-clock.h>
++#include <plat/regs-modem.h>
++#include <plat/regs-syscon-power.h>
++#include <plat/regs-gpio-memport.h>
++
++#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
++#include <plat/gpio-bank-n.h>
++
++void s3c_pm_debug_smdkled(u32 set, u32 clear)
++{
++      unsigned long flags;
++      u32 reg;
++
++      local_irq_save(flags);
++      reg = __raw_readl(S3C64XX_GPNCON);
++      reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
++               S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
++      reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
++             S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
++      __raw_writel(reg, S3C64XX_GPNCON);
++
++      reg = __raw_readl(S3C64XX_GPNDAT);
++      reg &= ~(clear << 12);
++      reg |= set << 12;
++      __raw_writel(reg, S3C64XX_GPNDAT);
++
++      local_irq_restore(flags);
++}
++#endif
++
++static struct sleep_save core_save[] = {
++      SAVE_ITEM(S3C_APLL_LOCK),
++      SAVE_ITEM(S3C_MPLL_LOCK),
++      SAVE_ITEM(S3C_EPLL_LOCK),
++      SAVE_ITEM(S3C_CLK_SRC),
++      SAVE_ITEM(S3C_CLK_DIV0),
++      SAVE_ITEM(S3C_CLK_DIV1),
++      SAVE_ITEM(S3C_CLK_DIV2),
++      SAVE_ITEM(S3C_CLK_OUT),
++      SAVE_ITEM(S3C_HCLK_GATE),
++      SAVE_ITEM(S3C_PCLK_GATE),
++      SAVE_ITEM(S3C_SCLK_GATE),
++      SAVE_ITEM(S3C_MEM0_GATE),
++
++      SAVE_ITEM(S3C_EPLL_CON1),
++      SAVE_ITEM(S3C_EPLL_CON0),
++
++      SAVE_ITEM(S3C64XX_MEM0DRVCON),
++      SAVE_ITEM(S3C64XX_MEM1DRVCON),
++
++#ifndef CONFIG_CPU_FREQ
++      SAVE_ITEM(S3C_APLL_CON),
++      SAVE_ITEM(S3C_MPLL_CON),
++#endif
++};
++
++static struct sleep_save misc_save[] = {
++      SAVE_ITEM(S3C64XX_AHB_CON0),
++      SAVE_ITEM(S3C64XX_AHB_CON1),
++      SAVE_ITEM(S3C64XX_AHB_CON2),
++      
++      SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
++      SAVE_ITEM(S3C64XX_SPCON),
++
++      SAVE_ITEM(S3C64XX_MEM0CONSTOP),
++      SAVE_ITEM(S3C64XX_MEM1CONSTOP),
++      SAVE_ITEM(S3C64XX_MEM0CONSLP0),
++      SAVE_ITEM(S3C64XX_MEM0CONSLP1),
++      SAVE_ITEM(S3C64XX_MEM1CONSLP),
++};
++
++void s3c_pm_configure_extint(void)
++{
++      __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
++}
++
++void s3c_pm_restore_core(void)
++{
++      __raw_writel(0, S3C64XX_EINT_MASK);
++
++      s3c_pm_debug_smdkled(1 << 2, 0);
++
++      s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
++      s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
++}
++
++void s3c_pm_save_core(void)
++{
++      s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
++      s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
++}
++
++/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
++ * put the per-cpu code in here until any new cpu comes along and changes
++ * this.
++ */
++
++#include <plat/regs-gpio.h>
++
++static void s3c64xx_cpu_suspend(void)
++{
++      unsigned long tmp;
++
++      /* set our standby method to sleep */
++
++      tmp = __raw_readl(S3C64XX_PWR_CFG);
++      tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
++      tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
++      __raw_writel(tmp, S3C64XX_PWR_CFG);
++
++      /* clear any old wakeup */
++
++      __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
++                   S3C64XX_WAKEUP_STAT);
++
++      /* set the LED state to 0110 over sleep */
++      s3c_pm_debug_smdkled(3 << 1, 0xf);
++
++      /* issue the standby signal into the pm unit. Note, we
++       * issue a write-buffer drain just in case */
++
++      tmp = 0;
++
++      asm("b 1f\n\t"
++          ".align 5\n\t"
++          "1:\n\t"
++          "mcr p15, 0, %0, c7, c10, 5\n\t"
++          "mcr p15, 0, %0, c7, c10, 4\n\t"
++          "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
++
++      /* we should never get past here */
++
++      panic("sleep resumed to originator?");
++}
++
++static void s3c64xx_pm_prepare(void)
++{
++      /* store address of resume. */
++      __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
++
++      /* ensure previous wakeup state is cleared before sleeping */
++      __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
++}
++
++static int s3c64xx_pm_init(void)
++{
++      pm_cpu_prep = s3c64xx_pm_prepare;
++      pm_cpu_sleep = s3c64xx_cpu_suspend;
++      pm_uart_udivslot = 1;
++      return 0;
++}
++
++arch_initcall(s3c64xx_pm_init);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/s3c6400-clock.c
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/s3c6400-clock.c        2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/s3c6400-clock.c     2009-05-10 22:27:59.000000000 +0200
+@@ -24,6 +24,7 @@
+ #include <mach/hardware.h>
+ #include <mach/map.h>
++#include <mach/cpu.h>
+ #include <plat/cpu-freq.h>
+@@ -88,6 +89,80 @@
+       .sources        = &clk_src_apll,
+ };
++static u32 clk_arm_div_mask(void)
++{
++      if (cpu_is_s3c6400())
++              return S3C6400_CLKDIV0_ARM_MASK;
++
++      if (cpu_is_s3c6410())
++              return S3C6410_CLKDIV0_ARM_MASK;
++
++      return 0;
++}
++
++static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
++{
++      unsigned long rate = clk_get_rate(clk->parent);
++      u32 val;
++
++      val = __raw_readl(S3C_CLK_DIV0);
++      val &= clk_arm_div_mask();
++
++      return rate / (val + 1);
++}
++
++static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
++                                              unsigned long rate)
++{
++      unsigned long parent = clk_get_rate(clk->parent);
++      int div;
++      int max = clk_arm_div_mask() + 1;
++
++      if (parent < rate)
++              return parent;
++
++      div = parent / rate;
++
++      if (div < 1)
++              div = 1;
++      if (div > max)
++              div = max;
++
++      return parent / div;
++}
++
++static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
++{
++      unsigned int div;
++      u32 val;
++      unsigned long flags;
++
++      div = (clk_get_rate(clk->parent) / rate) - 1;
++
++      if (div > clk_arm_div_mask())
++              return -EINVAL;
++
++      local_irq_save(flags);
++
++      val = __raw_readl(S3C_CLK_DIV0);
++      val &= ~clk_arm_div_mask();
++      val |= div;
++
++      __raw_writel(val, S3C_CLK_DIV0);
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++static struct clk clk_arm = {
++      .name           = "armclk",
++      .id             = -1,
++      .parent         = &clk_mout_apll.clk,
++      .round_rate     = &s3c64xx_clk_arm_round_rate,
++      .get_rate       = s3c64xx_clk_arm_get_rate,
++      .set_rate       = s3c64xx_clk_arm_set_rate,
++};
++
+ struct clk clk_fout_epll = {
+       .name           = "fout_epll",
+       .id             = -1,
+@@ -239,10 +314,12 @@
+       rate = clk_round_rate(clk, rate);
+       div = clk_get_rate(clk->parent) / rate;
++      if (div > 16)
++              return -EINVAL;
+       val = __raw_readl(reg);
+-      val &= ~sclk->mask;
+-      val |= (rate - 1) << sclk->shift;
++      val &= ~(0xf << sclk->divider_shift);
++      val |= (div - 1) << sclk->divider_shift;
+       __raw_writel(val, reg);
+       return 0;
+@@ -282,7 +359,7 @@
+       if (rate > parent_rate)
+               rate = parent_rate;
+       else {
+-              div = rate / parent_rate;
++              div = parent_rate / rate;
+               if (div == 0)
+                       div = 1;
+@@ -351,7 +428,7 @@
+ static struct clksrc_clk clk_usbhost = {
+       .clk    = {
+-              .name           = "usb-host-bus",
++              .name           = "usb-bus-host",
+               .id             = -1,
+               .ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+               .enable         = s3c64xx_sclk_ctrl,
+@@ -518,6 +595,55 @@
+       .reg_divider    = S3C_CLK_DIV2,
+ };
++static struct clk *clkset_camera_list[] = {
++      &clk_h2,
++};
++
++static struct clk_sources clkset_camera = {
++      .sources        = clkset_camera_list,
++      .nr_sources     = ARRAY_SIZE(clkset_camera_list),
++};
++
++static struct clksrc_clk clk_camera = {
++      .clk    = {
++              .name           = "camera",
++              .id             = -1,
++              .ctrlbit        = S3C_CLKCON_SCLK_CAM,
++              .enable         = s3c64xx_sclk_ctrl,
++              .set_parent     = s3c64xx_setparent_clksrc,
++              .get_rate       = s3c64xx_getrate_clksrc,
++              .set_rate       = s3c64xx_setrate_clksrc,
++              .round_rate     = s3c64xx_roundrate_clksrc,
++      },
++      .shift          = 0,
++      .mask           = 0,
++      .sources        = &clkset_camera,
++      .divider_shift  = S3C6400_CLKDIV0_CAM_SHIFT,
++      .reg_divider    = S3C_CLK_DIV0,
++};
++
++static struct clk *clkset_camif_list[] = {
++      &clk_h,
++};
++
++static struct clk_sources clkset_camif = {
++      .sources        = clkset_camif_list,
++      .nr_sources     = ARRAY_SIZE(clkset_camif_list),
++};
++
++static struct clksrc_clk clk_camif = {
++      .clk    = {
++              .name           = "camif",
++              .id             = -1,
++              .ctrlbit        = S3C_CLKCON_HCLK_CAMIF,
++              .enable         = s3c64xx_hclk_ctrl,
++              .set_parent     = s3c64xx_setparent_clksrc,
++      },
++      .shift          = 0,
++      .mask           = 0,
++      .sources        = &clkset_camif,
++};
++
+ /* Clock initialisation code */
+ static struct clksrc_clk *init_parents[] = {
+@@ -534,6 +660,8 @@
+       &clk_audio0,
+       &clk_audio1,
+       &clk_irda,
++      &clk_camif,
++      &clk_camera,
+ };
+ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
+@@ -606,6 +734,7 @@
+       clk_fout_epll.rate = epll;
+       clk_fout_apll.rate = apll;
++      clk_h2.rate = hclk2;
+       clk_h.rate = hclk;
+       clk_p.rate = pclk;
+       clk_f.rate = fclk;
+@@ -633,6 +762,9 @@
+       &clk_audio0.clk,
+       &clk_audio1.clk,
+       &clk_irda.clk,
++      &clk_camera.clk,
++      &clk_camif.clk,
++      &clk_arm,
+ };
+ void __init s3c6400_register_clocks(void)
+@@ -650,6 +782,5 @@
+               }
+       }
+-      clk_mpll.parent = &clk_mout_mpll.clk;
+       clk_epll.parent = &clk_mout_epll.clk;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/sleep.S linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/sleep.S
+--- linux-2.6.29-rc3.owrt/arch/arm/plat-s3c64xx/sleep.S        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/arch/arm/plat-s3c64xx/sleep.S     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,143 @@
++/* linux/0arch/arm/plat-s3c64xx/sleep.S
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * S3C64XX CPU sleep code
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/linkage.h>
++#include <asm/assembler.h>
++#include <mach/map.h>
++
++#undef S3C64XX_VA_GPIO
++#define S3C64XX_VA_GPIO (0x0)
++
++#include <plat/regs-gpio.h>
++#include <plat/gpio-bank-n.h>
++
++#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
++
++      .text
++
++      /* s3c_cpu_save
++       *
++       * Save enough processor state to allow the restart of the pm.c
++       * code after resume.
++       *
++       * entry:
++       *      r0 = pointer to the save block
++       * exit:
++       *      r0 = exit code: 1 => stored data
++       *                      0 => resumed from sleep
++      */
++
++ENTRY(s3c_cpu_save)
++      stmfd   sp!, { r4 - r12, lr }
++
++      mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
++      mrc     p15, 0, r5, c3, c0, 0   @ Domain ID
++      mrc     p15, 0, r6, c2, c0, 0   @ Translation Table BASE0
++      mrc     p15, 0, r7, c2, c0, 1   @ Translation Table BASE1
++      mrc     p15, 0, r8, c2, c0, 2   @ Translation Table Control
++      mrc     p15, 0, r9, c1, c0, 0   @ Control register
++      mrc     p15, 0, r10, c1, c0, 1  @ Auxiliary control register
++      mrc     p15, 0, r11, c1, c0, 2  @ Co-processor access controls
++
++      stmia   r0, { r4 - r13 }        @ Save CP registers and SP
++      mov     r0, #0
++      ldmfd   sp, { r4 - r12, pc }    @ return, not disturbing SP
++
++      @@ return to the caller, after the MMU is turned on.
++      @@ restore the last bits of the stack and return.
++resume_with_mmu:
++      mov     r0, #1
++      ldmfd   sp!, { r4 - r12, pc }   @ return, from sp from s3c_cpu_save
++
++      .data
++
++      /* the next bit is code, but it requires easy access to the
++       * s3c_sleep_save_phys data before the MMU is switched on, so
++       * we store the code that needs this variable in the .data where
++       * the value can be written to (the .text segment is RO).
++      */
++
++      .global s3c_sleep_save_phys
++s3c_sleep_save_phys:
++      .word   0
++
++      /* Sleep magic, the word before the resume entry point so that the
++       * bootloader can check for a resumeable image. */
++
++      .word   0x2bedf00d
++
++      /* s3c_cpu_reusme
++       *
++       * This is the entry point, stored by whatever method the bootloader
++       * requires to get the kernel runnign again. This code expects to be
++       * entered with no caches live and the MMU disabled. It will then
++       * restore the MMU and other basic CP registers saved and restart
++       * the kernel C code to finish the resume code.
++      */
++
++ENTRY(s3c_cpu_resume)
++      msr     cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
++      ldr     r2, =LL_UART            /* for debug */
++
++#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
++      /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
++       * as the uboot version supplied resets these to inputs during the
++       * resume checks.
++      */
++
++      ldr     r3, =S3C64XX_PA_GPIO
++      ldr     r0, [ r3, #S3C64XX_GPNCON ]
++      bic     r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
++                        S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
++      orr     r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
++                        S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
++      str     r0, [ r3, #S3C64XX_GPNCON ]
++
++      ldr     r0, [ r3, #S3C64XX_GPNDAT ]
++      bic     r0, r0, #0xf << 12                      @ GPN12..15
++      orr     r0, r0, #1 << 15                        @ GPN15
++      str     r0, [ r3, #S3C64XX_GPNDAT ]
++#endif
++
++      /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
++       * are thoroughly cleaned just in case the bootloader didn't do it
++       * for us. */
++      mov     r0, #0
++      mcr     p15, 0, r0, c7, c14, 0          @ clean+invalidate D cache
++      mcr     p15, 0, r0, c7, c5, 0           @ invalidate I cache
++      mcr     p15, 0, r0, c7, c15, 0          @ clean+invalidate cache
++      mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer
++      @@mcr   p15, 0, r0, c8, c7, 0           @ invalidate I + D TLBs
++      @@mcr   p15, 0, r0, c7, c7, 0           @ Invalidate I + D caches
++
++      ldr     r0, s3c_sleep_save_phys
++      ldmia   r0, { r4 - r13 }
++
++      mcr     p15, 0, r4, c13, c0, 0  @ FCSE/PID
++      mcr     p15, 0, r5, c3, c0, 0   @ Domain ID
++      mcr     p15, 0, r6, c2, c0, 0   @ Translation Table BASE0
++      mcr     p15, 0, r7, c2, c0, 1   @ Translation Table BASE1
++      mcr     p15, 0, r8, c2, c0, 2   @ Translation Table Control
++      mcr     p15, 0, r10, c1, c0, 1  @ Auxiliary control register
++
++      mov     r0, #0                  @ restore copro access controls
++      mcr     p15, 0, r11, c1, c0, 2  @ Co-processor access controls
++      mcr     p15, 0, r0, c7, c5, 4
++
++      ldr     r2, =resume_with_mmu
++      mcr     p15, 0, r9, c1, c0, 0           /* turn mmu back on */
++      nop
++      mov     pc, r2                          /* jump back */
++
++      .end
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/arch/arm/tools/mach-types linux-2.6.29-rc3.owrt.om/arch/arm/tools/mach-types
+--- linux-2.6.29-rc3.owrt/arch/arm/tools/mach-types    2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/arch/arm/tools/mach-types 2009-05-10 22:27:59.000000000 +0200
+@@ -1994,3 +1994,5 @@
+ blaze                 MACH_BLAZE              BLAZE                   2004
+ linkstation_ls_hgl    MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL      2005
+ htcvenus              MACH_HTCVENUS           HTCVENUS                2006
++om_3d7k                       MACH_OM_3D7K            OM_3D7K                 2120
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/build linux-2.6.29-rc3.owrt.om/build
+--- linux-2.6.29-rc3.owrt/build        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/build     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,128 @@
++#!/bin/sh
++#
++# Kernel building helper script (C)2008 Openmoko, Inc
++# Andy Green <andy@openmoko.org>
++#
++# Licensed under GPLv3 or later
++#
++#
++# you need to run this from the top level source dir, but it creates all
++# object files into a subdir given in the first argument, eg
++#
++# ./build GTA02
++#
++# this radically speeds up swapping between build contexts.  Note the config
++# for each build lives in the subdir.
++
++PARALLEL=16
++
++if [ -z "$1" ] ; then
++      echo "Specify the build subdir, eg, GTA02 which contains the .config"
++      echo "and will hold the object files"
++      exit 1
++fi
++
++mkdir -p $1
++
++if [ -z "$CROSS_COMPILE" ]; then
++    export CROSS_COMPILE=/usr/local/openmoko/arm/bin/arm-angstrom-linux-gnueabi-
++fi
++make O=$1 ARCH=arm silentoldconfig
++
++#
++# figure out what we are building
++#
++
++PRODUCT=
++
++if [ ! -z "`grep CONFIG_MACH_NEO1973_GTA01=y $1/.config`" ] ; then
++      START=30008000
++      PRODUCT=GTA01
++fi
++
++if [ ! -z "`grep CONFIG_MACH_NEO1973_GTA02=y $1/.config`" ] ; then
++      START=30008000
++      PRODUCT=GTA02
++fi
++
++if [ ! -z "`grep CONFIG_MACH_OM_3D7K=y $1/.config`" ] ; then
++        START=50008000
++        PRODUCT=OM_3D7K
++fi
++
++if [ ! -z "`grep CONFIG_MACH_SMDK6410=y $1/.config`" ] ; then
++        START=50008000
++        PRODUCT=SMDK6410
++fi
++
++if [ ! -z "`grep CONFIG_MACH_M800=y $1/.config`" ] ; then
++      START=30008000
++      PRODUCT=M800
++fi
++
++if [ -z "$PRODUCT" ] ; then
++      echo "Unable to figure out what we are building from the config"
++      exit 1
++fi
++
++#
++# check that we are in a valid branch
++#
++
++if git branch | head -n1 | grep -q "* (no branch)"; then
++      cat <<EOF 1>&2
++There is no branch in the local copy of the repository right now!
++Hint: type git-branch, make sure you are in a valid branch and then try again
++EOF
++   exit 1
++fi;
++
++#
++# get the branch and head hash for the version we are building to
++# allow source tracability
++#
++
++VERSION=
++if [ -d .git ] ; then
++ HEAD=`git show --pretty=oneline | head -n1 | cut -d' ' -f1 | cut -b1-16`
++ BRANCH=`git branch | grep ^\* | cut -d' ' -f2 | sed s/-hist//g`
++ VERSION=-$PRODUCT\_$BRANCH
++fi
++
++
++echo $MKIMAGECMD
++
++#
++# actually make it
++#
++
++if make -j$PARALLEL O=$1 ARCH=arm CONFIG_DEBUG_SECTION_MISMATCH=y EXTRAVERSION=$VERSION; then
++
++      #
++      # if the build is happy, postprocess it by strip and with U-Boot header wrapper
++      # you can get mkimage from U-Boot or Qi build
++      #
++
++      ${CROSS_COMPILE}objcopy -O binary -R .note -R .comment -S $1/arch/arm/boot/compressed/vmlinux $1/linux.bin
++      mkimage -A arm -O linux -T kernel -C none -a $START -e $START -n "OM $PRODUCT $BRANCH""_$HEAD" -d $1/linux.bin $1/uImage-$PRODUCT.bin
++
++      # we can see if it is an "moredrivers" build by looking for USB Eth gadget
++      # if it is then keep a stamped copy of last build
++
++      if [ ! -z "`grep CONFIG_USB_USBNET=y $1/.config`" ] ; then
++              rm -f $1/uImage-moredrivers-$PRODUCT*.bin $1/modules-$PRODUCT*.tar.gz
++              cp $1/uImage-$PRODUCT.bin $1/uImage-moredrivers$VERSION-$HEAD.bin
++              rm -rf $1/staging
++              mkdir -p $1/staging
++              if [ ! -z "$2" ] ; then
++                      make O=$1 ARCH=arm modules_install INSTALL_MOD_PATH=staging
++                      cd $1/staging
++                      tar czf ../modules$VERSION-$HEAD.tar.gz .
++                      cd ../..
++              fi
++      fi
++      exit 0
++else
++      exit 1
++fi
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/dfu-kern linux-2.6.29-rc3.owrt.om/dfu-kern
+--- linux-2.6.29-rc3.owrt/dfu-kern     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/dfu-kern  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,16 @@
++#!/bin/bash
++
++if [ -z "$1" ] ; then
++      echo "Usage: $0 <DEVICE>    eg, $0 GTA02"
++      exit 1
++fi
++
++NAME=`echo $1 | cut -d'-' -f1`
++
++../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5119 -D $1/uImage-$NAME.bin
++if [ $? -eq 1 ] ; then
++../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5120 -D $1/uImage-$NAME.bin
++../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5119 -D $1/uImage-$NAME.bin
++fi
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/Documentation/arm/Samsung-S3C24XX/Suspend.txt linux-2.6.29-rc3.owrt.om/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+--- linux-2.6.29-rc3.owrt/Documentation/arm/Samsung-S3C24XX/Suspend.txt        2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/Documentation/arm/Samsung-S3C24XX/Suspend.txt     2009-05-10 22:27:59.000000000 +0200
+@@ -40,13 +40,13 @@
+ Machine Support
+ ---------------
+-  The machine specific functions must call the s3c2410_pm_init() function
++  The machine specific functions must call the s3c_pm_init() function
+   to say that its bootloader is capable of resuming. This can be as
+   simple as adding the following to the machine's definition:
+-  INITMACHINE(s3c2410_pm_init)
++  INITMACHINE(s3c_pm_init)
+-  A board can do its own setup before calling s3c2410_pm_init, if it
++  A board can do its own setup before calling s3c_pm_init, if it
+   needs to setup anything else for power management support.
+   There is currently no support for over-riding the default method of
+@@ -74,7 +74,7 @@
+       enable_irq_wake(IRQ_EINT0);
+-      s3c2410_pm_init();
++      s3c_pm_init();
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_drv.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_drv.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_drv.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_drv.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,3128 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * This driver is a pseudo ethernet driver to access the Atheros AR6000
++ * WLAN Device
++ */
++static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $";
++
++#include "ar6000_drv.h"
++#include "htc.h"
++
++MODULE_LICENSE("GPL and additional rights");
++
++#ifndef REORG_APTC_HEURISTICS
++#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++#endif /* REORG_APTC_HEURISTICS */
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++#define APTC_TRAFFIC_SAMPLING_INTERVAL     100  /* msec */
++#define APTC_UPPER_THROUGHPUT_THRESHOLD    3000 /* Kbps */
++#define APTC_LOWER_THROUGHPUT_THRESHOLD    2000 /* Kbps */
++
++typedef struct aptc_traffic_record {
++    A_BOOL timerScheduled;
++    struct timeval samplingTS;
++    unsigned long bytesReceived;
++    unsigned long bytesTransmitted;
++} APTC_TRAFFIC_RECORD;
++
++A_TIMER aptcTimer;
++APTC_TRAFFIC_RECORD aptcTR;
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++int bmienable = 0;
++unsigned int bypasswmi = 0;
++unsigned int debuglevel = 0;
++int tspecCompliance = 1;
++unsigned int busspeedlow = 0;
++unsigned int onebitmode = 0;
++unsigned int skipflash = 0;
++unsigned int wmitimeout = 2;
++unsigned int wlanNodeCaching = 1;
++unsigned int enableuartprint = 0;
++unsigned int logWmiRawMsgs = 0;
++unsigned int enabletimerwar = 0;
++unsigned int mbox_yield_limit = 99;
++int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
++int allow_trace_signal = 0;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++unsigned int testmode =0;
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(bmienable, int, 0644);
++module_param(bypasswmi, int, 0644);
++module_param(debuglevel, int, 0644);
++module_param(tspecCompliance, int, 0644);
++module_param(onebitmode, int, 0644);
++module_param(busspeedlow, int, 0644);
++module_param(skipflash, int, 0644);
++module_param(wmitimeout, int, 0644);
++module_param(wlanNodeCaching, int, 0644);
++module_param(logWmiRawMsgs, int, 0644);
++module_param(enableuartprint, int, 0644);
++module_param(enabletimerwar, int, 0644);
++module_param(mbox_yield_limit, int, 0644);
++module_param(reduce_credit_dribble, int, 0644);
++module_param(allow_trace_signal, int, 0644);
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++module_param(testmode, int, 0644);
++#endif
++#else
++
++#define __user
++/* for linux 2.4 and lower */
++MODULE_PARM(bmienable,"i");
++MODULE_PARM(bypasswmi,"i");
++MODULE_PARM(debuglevel, "i");
++MODULE_PARM(onebitmode,"i");
++MODULE_PARM(busspeedlow, "i");
++MODULE_PARM(skipflash, "i");
++MODULE_PARM(wmitimeout, "i");
++MODULE_PARM(wlanNodeCaching, "i");
++MODULE_PARM(enableuartprint,"i");
++MODULE_PARM(logWmiRawMsgs, "i");
++MODULE_PARM(enabletimerwar,"i");
++MODULE_PARM(mbox_yield_limit,"i");
++MODULE_PARM(reduce_credit_dribble,"i");
++MODULE_PARM(allow_trace_signal,"i");
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++MODULE_PARM(testmode, "i");
++#endif
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
++/* in 2.6.10 and later this is now a pointer to a uint */
++unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
++#define mboxnum &_mboxnum
++#else
++unsigned int mboxnum = HTC_MAILBOX_NUM_MAX;
++#endif
++
++#ifdef CONFIG_AR6000_WLAN_RESET
++unsigned int resetok = 1;
++#else
++unsigned int resetok = 0;
++#endif
++
++#ifdef DEBUG
++A_UINT32 g_dbg_flags = DBG_DEFAULTS;
++unsigned int debugflags = 0;
++int debugdriver = 1;
++unsigned int debughtc = 128;
++unsigned int debugbmi = 1;
++unsigned int debughif = 2;
++unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(debugflags, int, 0644);
++module_param(debugdriver, int, 0644);
++module_param(debughtc, int, 0644);
++module_param(debugbmi, int, 0644);
++module_param(debughif, int, 0644);
++module_param(resetok, int, 0644);
++module_param_array(txcreditsavailable, int, mboxnum, 0644);
++module_param_array(txcreditsconsumed, int, mboxnum, 0644);
++module_param_array(txcreditintrenable, int, mboxnum, 0644);
++module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644);
++#else
++/* linux 2.4 and lower */
++MODULE_PARM(debugflags,"i");
++MODULE_PARM(debugdriver, "i");
++MODULE_PARM(debughtc, "i");
++MODULE_PARM(debugbmi, "i");
++MODULE_PARM(debughif, "i");
++MODULE_PARM(resetok, "i");
++MODULE_PARM(txcreditsavailable, "0-3i");
++MODULE_PARM(txcreditsconsumed, "0-3i");
++MODULE_PARM(txcreditintrenable, "0-3i");
++MODULE_PARM(txcreditintrenableaggregate, "0-3i");
++#endif
++
++#endif /* DEBUG */
++
++unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
++unsigned int hifBusRequestNumMax = 40;
++unsigned int war23838_disabled = 0;
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++unsigned int enableAPTCHeuristics = 1;
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param_array(tx_attempt, int, mboxnum, 0644);
++module_param_array(tx_post, int, mboxnum, 0644);
++module_param_array(tx_complete, int, mboxnum, 0644);
++module_param(hifBusRequestNumMax, int, 0644);
++module_param(war23838_disabled, int, 0644);
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++module_param(enableAPTCHeuristics, int, 0644);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#else
++MODULE_PARM(tx_attempt, "0-3i");
++MODULE_PARM(tx_post, "0-3i");
++MODULE_PARM(tx_complete, "0-3i");
++MODULE_PARM(hifBusRequestNumMax, "i");
++MODULE_PARM(war23838_disabled, "i");
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++MODULE_PARM(enableAPTCHeuristics, "i");
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++#endif
++
++#ifdef BLOCK_TX_PATH_FLAG
++int blocktx = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++module_param(blocktx, int, 0644);
++#else
++MODULE_PARM(blocktx, "i");
++#endif
++#endif /* BLOCK_TX_PATH_FLAG */
++
++// TODO move to arsoft_c
++USER_RSSI_THOLD rssi_map[12];
++
++int reconnect_flag = 0;
++
++DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue);
++
++/* Function declarations */
++static int ar6000_init_module(void);
++static void ar6000_cleanup_module(void);
++
++int ar6000_init(struct net_device *dev);
++static int ar6000_open(struct net_device *dev);
++static int ar6000_close(struct net_device *dev);
++static void ar6000_init_control_info(AR_SOFTC_T *ar);
++static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
++
++static void ar6000_destroy(struct net_device *dev, unsigned int unregister);
++static void ar6000_detect_error(unsigned long ptr);
++static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
++static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
++
++/*
++ * HTC service connection handlers
++ */
++static void ar6000_avail_ev(HTC_HANDLE HTCHandle);
++
++static void ar6000_unavail_ev(void *Instance);
++
++static void ar6000_target_failure(void *Instance, A_STATUS Status);
++
++static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
++
++static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
++
++static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket);
++
++static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint);
++
++static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint);
++
++/*
++ * Static variables
++ */
++
++static struct net_device *ar6000_devices[MAX_AR6000];
++extern struct iw_handler_def ath_iw_handler_def;
++DECLARE_WAIT_QUEUE_HEAD(arEvent);
++static void ar6000_cookie_init(AR_SOFTC_T *ar);
++static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
++static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
++static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
++static void ar6000_TxDataCleanup(AR_SOFTC_T *ar);
++
++#ifdef USER_KEYS
++static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
++#endif
++
++
++static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
++
++#define HOST_INTEREST_ITEM_ADDRESS(ar, item)    \
++((ar->arTargetType == TARGET_TYPE_AR6001) ?     \
++   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
++   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
++
++
++/* Debug log support */
++
++/*
++ * Flag to govern whether the debug logs should be parsed in the kernel
++ * or reported to the application.
++ */
++#ifdef DEBUG
++#define REPORT_DEBUG_LOGS_TO_APP
++#endif
++
++A_STATUS
++ar6000_set_host_app_area(AR_SOFTC_T *ar)
++{
++    A_UINT32 address, data;
++    struct host_app_area_s host_app_area;
++
++    /* Fetch the address of the host_app_area_s instance in the host interest area */
++    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest);
++    if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
++        return A_ERROR;
++    }
++    address = data;
++    host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
++    if (ar6000_WriteDataDiag(ar->arHifDevice, address,
++                             (A_UCHAR *)&host_app_area,
++                             sizeof(struct host_app_area_s)) != A_OK)
++    {
++        return A_ERROR;
++    }
++
++    return A_OK;
++}
++
++A_UINT32
++dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
++{
++    A_UINT32 param;
++    A_UINT32 address;
++    A_STATUS status;
++
++    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr);
++    if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                      (A_UCHAR *)&param, 4)) != A_OK)
++    {
++        param = 0;
++    }
++
++    return param;
++}
++
++/*
++ * The dbglog module has been initialized. Its ok to access the relevant
++ * data stuctures over the diagnostic window.
++ */
++void
++ar6000_dbglog_init_done(AR_SOFTC_T *ar)
++{
++    ar->dbglog_init_done = TRUE;
++}
++
++A_UINT32
++dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
++{
++    A_INT32 *buffer;
++    A_UINT32 count;
++    A_UINT32 numargs;
++    A_UINT32 length;
++    A_UINT32 fraglen;
++
++    count = fraglen = 0;
++    buffer = (A_INT32 *)datap;
++    length = (limit >> 2);
++
++    if (len <= limit) {
++        fraglen = len;
++    } else {
++        while (count < length) {
++            numargs = DBGLOG_GET_NUMARGS(buffer[count]);
++            fraglen = (count << 2);
++            count += numargs + 1;
++        }
++    }
++
++    return fraglen;
++}
++
++void
++dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
++{
++    A_INT32 *buffer;
++    A_UINT32 count;
++    A_UINT32 timestamp;
++    A_UINT32 debugid;
++    A_UINT32 moduleid;
++    A_UINT32 numargs;
++    A_UINT32 length;
++
++    count = 0;
++    buffer = (A_INT32 *)datap;
++    length = (len >> 2);
++    while (count < length) {
++        debugid = DBGLOG_GET_DBGID(buffer[count]);
++        moduleid = DBGLOG_GET_MODULEID(buffer[count]);
++        numargs = DBGLOG_GET_NUMARGS(buffer[count]);
++        timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
++        switch (numargs) {
++            case 0:
++            AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp);
++            break;
++
++            case 1:
++            AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid,
++                            timestamp, buffer[count+1]);
++            break;
++
++            case 2:
++            AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
++                            timestamp, buffer[count+1], buffer[count+2]);
++            break;
++
++            default:
++            AR_DEBUG_PRINTF("Invalid args: %d\n", numargs);
++        }
++        count += numargs + 1;
++    }
++}
++
++int
++ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
++{
++    struct dbglog_hdr_s debug_hdr;
++    struct dbglog_buf_s debug_buf;
++    A_UINT32 address;
++    A_UINT32 length;
++    A_UINT32 dropped;
++    A_UINT32 firstbuf;
++    A_UINT32 debug_hdr_ptr;
++
++    if (!ar->dbglog_init_done) return A_ERROR;
++
++#ifndef CONFIG_AR6000_WLAN_DEBUG
++    return 0;
++#endif
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (ar->dbgLogFetchInProgress) {
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        return A_EBUSY;
++    }
++
++        /* block out others */
++    ar->dbgLogFetchInProgress = TRUE;
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
++    printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
++
++    /* Get the contents of the ring buffer */
++    if (debug_hdr_ptr) {
++        address = debug_hdr_ptr;
++        length = sizeof(struct dbglog_hdr_s);
++        ar6000_ReadDataDiag(ar->arHifDevice, address,
++                            (A_UCHAR *)&debug_hdr, length);
++        address = (A_UINT32)debug_hdr.dbuf;
++        firstbuf = address;
++        dropped = debug_hdr.dropped;
++        length = sizeof(struct dbglog_buf_s);
++        ar6000_ReadDataDiag(ar->arHifDevice, address,
++                            (A_UCHAR *)&debug_buf, length);
++
++        do {
++            address = (A_UINT32)debug_buf.buffer;
++            length = debug_buf.length;
++            if ((length) && (debug_buf.length <= debug_buf.bufsize)) {
++                /* Rewind the index if it is about to overrun the buffer */
++                if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
++                    ar->log_cnt = 0;
++                }
++                if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                    (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
++                {
++                    break;
++                }
++                ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length);
++                ar->log_cnt += length;
++            } else {
++                AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n",
++                                debug_buf.length, debug_buf.bufsize);
++            }
++
++            address = (A_UINT32)debug_buf.next;
++            length = sizeof(struct dbglog_buf_s);
++            if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
++                                (A_UCHAR *)&debug_buf, length))
++            {
++                break;
++            }
++
++        } while (address != firstbuf);
++    }
++
++    ar->dbgLogFetchInProgress = FALSE;
++
++    return A_OK;
++}
++
++void
++ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
++                    A_INT8 *buffer, A_UINT32 length)
++{
++#ifdef REPORT_DEBUG_LOGS_TO_APP
++    #define MAX_WIRELESS_EVENT_SIZE 252
++    /*
++     * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
++     * There seems to be a limitation on the length of message that could be
++     * transmitted to the user app via this mechanism.
++     */
++    A_UINT32 send, sent;
++
++    sent = 0;
++    send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
++                                     MAX_WIRELESS_EVENT_SIZE);
++    while (send) {
++        ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send);
++        sent += send;
++        send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
++                                         MAX_WIRELESS_EVENT_SIZE);
++    }
++#else
++    AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n",
++                    dropped, length);
++
++    /* Interpret the debug logs */
++    dbglog_parse_debug_logs(buffer, length);
++#endif /* REPORT_DEBUG_LOGS_TO_APP */
++}
++
++
++
++static int __init
++ar6000_init_module(void)
++{
++    static int probed = 0;
++    A_STATUS status;
++    HTC_INIT_INFO initInfo;
++
++    A_MEMZERO(&initInfo,sizeof(initInfo));
++    initInfo.AddInstance = ar6000_avail_ev;
++    initInfo.DeleteInstance = ar6000_unavail_ev;
++    initInfo.TargetFailure = ar6000_target_failure;
++
++
++#ifdef DEBUG
++    /* Set the debug flags if specified at load time */
++    if(debugflags != 0)
++    {
++        g_dbg_flags = debugflags;
++    }
++#endif
++
++    if (probed) {
++        return -ENODEV;
++    }
++    probed++;
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++    ar6000_gpio_init();
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++    status = HTCInit(&initInfo);
++    if(status != A_OK)
++        return -ENODEV;
++
++    return 0;
++}
++
++static void __exit
++ar6000_cleanup_module(void)
++{
++    int i = 0;
++    struct net_device *ar6000_netdev;
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    /* Delete the Adaptive Power Control timer */
++    if (timer_pending(&aptcTimer)) {
++        del_timer_sync(&aptcTimer);
++    }
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++    for (i=0; i < MAX_AR6000; i++) {
++        if (ar6000_devices[i] != NULL) {
++            ar6000_netdev = ar6000_devices[i];
++            ar6000_devices[i] = NULL;
++            ar6000_destroy(ar6000_netdev, 1);
++        }
++    }
++
++        /* shutting down HTC will cause the HIF layer to detach from the
++         * underlying bus driver which will cause the subsequent deletion of
++         * all HIF and HTC instances */
++    HTCShutDown();
++
++    AR_DEBUG_PRINTF("ar6000_cleanup: success\n");
++}
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++void
++aptcTimerHandler(unsigned long arg)
++{
++    A_UINT32 numbytes;
++    A_UINT32 throughput;
++    AR_SOFTC_T *ar;
++    A_STATUS status;
++
++    ar = (AR_SOFTC_T *)arg;
++    A_ASSERT(ar != NULL);
++    A_ASSERT(!timer_pending(&aptcTimer));
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    /* Get the number of bytes transferred */
++    numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
++    aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
++
++    /* Calculate and decide based on throughput thresholds */
++    throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
++    if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
++        /* Enable Sleep and delete the timer */
++        A_ASSERT(ar->arWmiReady == TRUE);
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
++        AR6000_SPIN_LOCK(&ar->arLock, 0);
++        A_ASSERT(status == A_OK);
++        aptcTR.timerScheduled = FALSE;
++    } else {
++        A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++
++
++/* set HTC block size, assume BMI is already initialized */
++A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar)
++{
++    A_STATUS status;
++    A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX];
++
++    do {
++            /* get the block sizes */
++        status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    blocksizes, sizeof(blocksizes));
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n");
++            break;
++        }
++            /* note: we actually get the block size for mailbox 1, for SDIO the block
++             * size on mailbox 0 is artificially set to 1 */
++            /* must be a power of 2 */
++        A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0);
++
++            /* set the host interest area for the block size */
++        status = BMIWriteMemory(ar->arHifDevice,
++                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz),
++                                (A_UCHAR *)&blocksizes[1],
++                                4);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n");
++            break;
++        }
++
++        AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n",
++                blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz));
++
++            /* set the host interest area for the mbox ISR yield limit */
++        status = BMIWriteMemory(ar->arHifDevice,
++                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit),
++                                (A_UCHAR *)&mbox_yield_limit,
++                                4);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n");
++            break;
++        }
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void free_raw_buffers(AR_SOFTC_T *ar)
++{
++    int i, j;
++
++    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
++      for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++)
++          kfree(ar->raw_htc_read_buffer[i][j]);
++      for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++)
++          kfree(ar->raw_htc_write_buffer[i][j]);
++    }
++}
++
++static int alloc_raw_buffers(AR_SOFTC_T *ar)
++{
++    int i, j;
++    raw_htc_buffer *b;
++
++    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
++      for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) {
++          b = kzalloc(sizeof(*b), GFP_KERNEL);
++          if (!b)
++              return -ENOMEM;
++          ar->raw_htc_read_buffer[i][j] = b;
++      }
++      for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) {
++          b = kzalloc(sizeof(*b), GFP_KERNEL);
++          if (!b)
++              return -ENOMEM;
++          ar->raw_htc_write_buffer[i][j] = b;
++      }
++    }
++    return 0;
++}
++
++/*
++ * HTC Event handlers
++ */
++static void
++ar6000_avail_ev(HTC_HANDLE HTCHandle)
++{
++    int i;
++    struct net_device *dev;
++    AR_SOFTC_T *ar;
++    int device_index = 0;
++
++    AR_DEBUG_PRINTF("ar6000_available\n");
++
++    for (i=0; i < MAX_AR6000; i++) {
++        if (ar6000_devices[i] == NULL) {
++            break;
++        }
++    }
++
++    if (i == MAX_AR6000) {
++        AR_DEBUG_PRINTF("ar6000_available: max devices reached\n");
++        return;
++    }
++
++    /* Save this. It gives a bit better readability especially since */
++    /* we use another local "i" variable below.                      */
++    device_index = i;
++
++    A_ASSERT(HTCHandle != NULL);
++
++    dev = alloc_etherdev(sizeof(AR_SOFTC_T));
++    if (dev == NULL) {
++        AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n");
++        return;
++    }
++
++    ether_setup(dev);
++
++    if (netdev_priv(dev) == NULL) {
++        printk(KERN_CRIT "ar6000_available: Could not allocate memory\n");
++        return;
++    }
++
++    A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T));
++
++    ar                       = (AR_SOFTC_T *)netdev_priv(dev);
++    ar->arNetDev             = dev;
++    ar->arHtcTarget          = HTCHandle;
++    ar->arHifDevice          = HTCGetHifDevice(HTCHandle);
++    ar->arWlanState          = WLAN_ENABLED;
++    ar->arRadioSwitch        = WLAN_ENABLED;
++    ar->arDeviceIndex        = device_index;
++
++    A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
++    ar->arHBChallengeResp.seqNum = 0;
++    ar->arHBChallengeResp.outstanding = FALSE;
++    ar->arHBChallengeResp.missCnt = 0;
++    ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
++    ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
++
++    ar6000_init_control_info(ar);
++    init_waitqueue_head(&arEvent);
++    sema_init(&ar->arSem, 1);
++
++    if (alloc_raw_buffers(ar)) {
++      free_raw_buffers(ar);
++      /*
++       * @@@ Clean up our own mess, but for anything else, cheerfully mimick
++       * the beautiful error non-handling of the rest of this function.
++       */
++      return;
++    }
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++    A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++    /*
++     * If requested, perform some magic which requires no cooperation from
++     * the Target.  It causes the Target to ignore flash and execute to the
++     * OS from ROM.
++     *
++     * This is intended to support recovery from a corrupted flash on Targets
++     * that support flash.
++     */
++    if (skipflash)
++    {
++        ar6000_reset_device_skipflash(ar->arHifDevice);
++            }
++
++    BMIInit();
++    {
++        struct bmi_target_info targ_info;
++
++        if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
++            return;
++        }
++
++        ar->arVersion.target_ver = targ_info.target_ver;
++        ar->arTargetType = targ_info.target_type;
++    }
++
++    if (enableuartprint) {
++        A_UINT32 param;
++        param = 1;
++        if (BMIWriteMemory(ar->arHifDevice,
++                           HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
++                           (A_UCHAR *)&param,
++                           4)!= A_OK)
++        {
++             AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n");
++             return ;
++        }
++        AR_DEBUG_PRINTF("Serial console prints enabled\n");
++    }
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    if(testmode) {
++        ar->arTargetMode = AR6000_TCMD_MODE;
++    }else {
++        ar->arTargetMode = AR6000_WLAN_MODE;
++    }
++#endif
++    if (enabletimerwar) {
++        A_UINT32 param;
++
++        if (BMIReadMemory(ar->arHifDevice,
++            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
++            (A_UCHAR *)&param,
++            4)!= A_OK)
++        {
++            AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n");
++            return;
++        }
++
++        param |= HI_OPTION_TIMER_WAR;
++
++        if (BMIWriteMemory(ar->arHifDevice,
++            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
++            (A_UCHAR *)&param,
++            4) != A_OK)
++        {
++            AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n");
++            return;
++        }
++        AR_DEBUG_PRINTF("Timer WAR enabled\n");
++    }
++
++
++        /* since BMIInit is called in the driver layer, we have to set the block
++         * size here for the target */
++
++    if (A_FAILED(ar6000_SetHTCBlockSize(ar))) {
++        return;
++    }
++
++    spin_lock_init(&ar->arLock);
++
++    /* Don't install the init function if BMI is requested */
++    if(!bmienable)
++    {
++        dev->init = ar6000_init;
++    } else {
++        AR_DEBUG_PRINTF(" BMI enabled \n");
++    }
++
++    dev->open = &ar6000_open;
++    dev->stop = &ar6000_close;
++    dev->hard_start_xmit = &ar6000_data_tx;
++    dev->get_stats = &ar6000_get_stats;
++
++    /* dev->tx_timeout = ar6000_tx_timeout; */
++    dev->do_ioctl = &ar6000_ioctl;
++    dev->watchdog_timeo = AR6000_TX_TIMEOUT;
++    ar6000_ioctl_iwsetup(&ath_iw_handler_def);
++    dev->wireless_handlers = &ath_iw_handler_def;
++    ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
++
++    /*
++     * We need the OS to provide us with more headroom in order to
++     * perform dix to 802.3, WMI header encap, and the HTC header
++     */
++    dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
++        sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN;
++
++    /* This runs the init function */
++    SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice));
++    if (register_netdev(dev)) {
++        AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n");
++        ar6000_destroy(dev, 0);
++        return;
++    }
++
++    HTCSetInstance(ar->arHtcTarget, ar);
++
++    /* We only register the device in the global list if we succeed. */
++    /* If the device is in the global list, it will be destroyed     */
++    /* when the module is unloaded.                                  */
++    ar6000_devices[device_index] = dev;
++
++    AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n",
++                    dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index,
++                    (A_UINT32)ar);
++}
++
++static void ar6000_target_failure(void *Instance, A_STATUS Status)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
++    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
++    static A_BOOL sip = FALSE;
++
++    if (Status != A_OK) {
++        if (timer_pending(&ar->arHBChallengeResp.timer)) {
++            A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
++        }
++
++        /* try dumping target assertion information (if any) */
++        ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
++
++        /*
++         * Fetch the logs from the target via the diagnostic
++         * window.
++         */
++        ar6000_dbglog_get_debug_logs(ar);
++
++        /* Report the error only once */
++        if (!sip) {
++            sip = TRUE;
++            errEvent.errorVal = WMI_TARGET_COM_ERR |
++                                WMI_TARGET_FATAL_ERR;
++#ifdef SEND_EVENT_TO_APP
++            ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
++                                     (A_UINT8 *)&errEvent,
++                                     sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
++#endif
++        }
++    }
++}
++
++static void
++ar6000_unavail_ev(void *Instance)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
++        /* NULL out it's entry in the global list */
++    ar6000_devices[ar->arDeviceIndex] = NULL;
++    ar6000_destroy(ar->arNetDev, 1);
++}
++
++/*
++ * We need to differentiate between the surprise and planned removal of the
++ * device because of the following consideration:
++ * - In case of surprise removal, the hcd already frees up the pending
++ *   for the device and hence there is no need to unregister the function
++ *   driver inorder to get these requests. For planned removal, the function
++ *   driver has to explictly unregister itself to have the hcd return all the
++ *   pending requests before the data structures for the devices are freed up.
++ *   Note that as per the current implementation, the function driver will
++ *   end up releasing all the devices since there is no API to selectively
++ *   release a particular device.
++ * - Certain commands issued to the target can be skipped for surprise
++ *   removal since they will anyway not go through.
++ */
++static void
++ar6000_destroy(struct net_device *dev, unsigned int unregister)
++{
++    AR_SOFTC_T *ar;
++
++    AR_DEBUG_PRINTF("+ar6000_destroy \n");
++
++    if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL))
++    {
++        AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__);
++        return;
++    }
++
++    /* Clear the tx counters */
++    memset(tx_attempt, 0, sizeof(tx_attempt));
++    memset(tx_post, 0, sizeof(tx_post));
++    memset(tx_complete, 0, sizeof(tx_complete));
++
++    /* Free up the device data structure */
++    if (unregister) {
++      unregister_netdev(dev);
++    } else {
++      ar6000_close(dev);
++    }
++
++    free_raw_buffers(ar);
++
++#ifndef free_netdev
++    kfree(dev);
++#else
++    free_netdev(dev);
++#endif
++
++    AR_DEBUG_PRINTF("-ar6000_destroy \n");
++}
++
++static void ar6000_detect_error(unsigned long ptr)
++{
++    struct net_device *dev = (struct net_device *)ptr;
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (ar->arHBChallengeResp.outstanding) {
++        ar->arHBChallengeResp.missCnt++;
++    } else {
++        ar->arHBChallengeResp.missCnt = 0;
++    }
++
++    if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
++        /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
++        ar->arHBChallengeResp.missCnt = 0;
++        ar->arHBChallengeResp.seqNum = 0;
++        errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++#ifdef SEND_EVENT_TO_APP
++        ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
++                                 (A_UINT8 *)&errEvent,
++                                 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
++#endif
++        return;
++    }
++
++    /* Generate the sequence number for the next challenge */
++    ar->arHBChallengeResp.seqNum++;
++    ar->arHBChallengeResp.outstanding = TRUE;
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    /* Send the challenge on the control channel */
++    if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
++        AR_DEBUG_PRINTF("Unable to send heart beat challenge\n");
++    }
++
++
++    /* Reschedule the timer for the next challenge */
++    A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
++}
++
++void ar6000_init_profile_info(AR_SOFTC_T *ar)
++{
++    ar->arSsidLen            = 0;
++    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++    ar->arNetworkType        = INFRA_NETWORK;
++    ar->arDot11AuthMode      = OPEN_AUTH;
++    ar->arAuthMode           = NONE_AUTH;
++    ar->arPairwiseCrypto     = NONE_CRYPT;
++    ar->arPairwiseCryptoLen  = 0;
++    ar->arGroupCrypto        = NONE_CRYPT;
++    ar->arGroupCryptoLen     = 0;
++    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
++    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
++    ar->arBssChannel = 0;
++}
++
++static void
++ar6000_init_control_info(AR_SOFTC_T *ar)
++{
++    ar->arWmiEnabled         = FALSE;
++    ar6000_init_profile_info(ar);
++    ar->arDefTxKeyIndex      = 0;
++    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
++    ar->arChannelHint        = 0;
++    ar->arListenInterval     = MAX_LISTEN_INTERVAL;
++    ar->arVersion.host_ver   = AR6K_SW_VERSION;
++    ar->arRssi               = 0;
++    ar->arTxPwr              = 0;
++    ar->arTxPwrSet           = FALSE;
++    ar->arSkipScan           = 0;
++    ar->arBeaconInterval     = 0;
++    ar->arBitRate            = 0;
++    ar->arMaxRetries         = 0;
++    ar->arWmmEnabled         = TRUE;
++}
++
++static int
++ar6000_open(struct net_device *dev)
++{
++    /* Wake up the queues */
++    netif_start_queue(dev);
++
++    return 0;
++}
++
++static int
++ar6000_close(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = netdev_priv(dev);
++
++    /* Stop the transmit queues */
++    netif_stop_queue(dev);
++
++    /* Disable the target and the interrupts associated with it */
++    if (ar->arWmiReady == TRUE)
++    {
++        if (!bypasswmi)
++        {
++            if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
++            {
++                AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__);
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar6000_init_profile_info(ar);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                wmi_disconnect_cmd(ar->arWmi);
++            }
++
++            ar6000_dbglog_get_debug_logs(ar);
++            ar->arWmiReady  = FALSE;
++            ar->arConnected = FALSE;
++            ar->arConnectPending = FALSE;
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++            ar->arWlanState = WLAN_ENABLED;
++#ifdef USER_KEYS
++            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++            ar->user_key_ctrl      = 0;
++#endif
++        }
++
++         AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__);
++    }
++    else
++    {
++        AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n",
++            __func__, (unsigned int) ar, (unsigned int) ar->arWmi);
++
++        /* Shut down WMI if we have started it */
++        if(ar->arWmiEnabled == TRUE)
++        {
++            AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__);
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++        }
++    }
++
++    /* stop HTC */
++    HTCStop(ar->arHtcTarget);
++
++    /* set the instance to NULL so we do not get called back on remove incase we
++     * we're explicity destroyed by module unload */
++    HTCSetInstance(ar->arHtcTarget, NULL);
++
++    if (resetok) {
++        /* try to reset the device if we can
++         * The driver may have been configure NOT to reset the target during
++         * a debug session */
++        AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n");
++        ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
++    } else {
++        AR_DEBUG_PRINTF(" Host does not want target reset. \n");
++    }
++
++       /* Done with cookies */
++    ar6000_cookie_cleanup(ar);
++
++    /* Cleanup BMI */
++    BMIInit();
++
++    return 0;
++}
++
++/* connect to a service */
++static A_STATUS ar6000_connectservice(AR_SOFTC_T               *ar,
++                                      HTC_SERVICE_CONNECT_REQ  *pConnect,
++                                      WMI_PRI_STREAM_ID        WmiStreamID,
++                                      char                     *pDesc)
++{
++    A_STATUS                 status;
++    HTC_SERVICE_CONNECT_RESP response;
++
++    do {
++
++        A_MEMZERO(&response,sizeof(response));
++
++        status = HTCConnectService(ar->arHtcTarget,
++                                   pConnect,
++                                   &response);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status);
++            break;
++        }
++
++        if (WmiStreamID == WMI_NOT_MAPPED) {
++                /* done */
++            break;
++        }
++
++            /* set endpoint mapping for the WMI stream in the driver layer */
++        arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint);
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
++{
++        /* flush all the data (non-control) streams
++         * we only flush packets that are tagged as data, we leave any control packets that
++         * were in the TX queues alone */
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_LOW_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_HIGH_PRI),
++                     AR6K_DATA_PKT_TAG);
++    HTCFlushEndpoint(ar->arHtcTarget,
++                     arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI),
++                     AR6K_DATA_PKT_TAG);
++}
++
++/* This function does one time initialization for the lifetime of the device */
++int ar6000_init(struct net_device *dev)
++{
++    AR_SOFTC_T *ar;
++    A_STATUS    status;
++    A_INT32     timeleft;
++
++    if((ar = netdev_priv(dev)) == NULL)
++    {
++        return(-EIO);
++    }
++
++    /* Do we need to finish the BMI phase */
++    if(BMIDone(ar->arHifDevice) != A_OK)
++    {
++        return -EIO;
++    }
++
++    if (!bypasswmi)
++    {
++#if 0 /* TBDXXX */
++        if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
++            A_PRINTF("WARNING: Host version 0x%x does not match Target "
++                    " version 0x%x!\n",
++                    ar->arVersion.host_ver, ar->arVersion.target_ver);
++        }
++#endif
++
++        /* Indicate that WMI is enabled (although not ready yet) */
++        ar->arWmiEnabled = TRUE;
++        if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
++        {
++            AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__);
++            return(-EIO);
++        }
++
++        AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__,
++            (unsigned int) ar->arWmi);
++    }
++
++    do {
++        HTC_SERVICE_CONNECT_REQ connect;
++
++            /* the reason we have to wait for the target here is that the driver layer
++             * has to init BMI in order to set the host block size,
++             */
++        status = HTCWaitTarget(ar->arHtcTarget);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        A_MEMZERO(&connect,sizeof(connect));
++            /* meta data is unused for now */
++        connect.pMetaData = NULL;
++        connect.MetaDataLength = 0;
++            /* these fields are the same for all service endpoints */
++        connect.EpCallbacks.pContext = ar;
++        connect.EpCallbacks.EpTxComplete = ar6000_tx_complete;
++        connect.EpCallbacks.EpRecv = ar6000_rx;
++        connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
++        connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
++        connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail;
++            /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
++             * Linux has the peculiarity of not providing flow control between the
++             * NIC and the network stack. There is no API to indicate that a TX packet
++             * was sent which could provide some back pressure to the network stack.
++             * Under linux you would have to wait till the network stack consumed all sk_buffs
++             * before any back-flow kicked in. Which isn't very friendly.
++             * So we have to manage this ourselves */
++        connect.MaxSendQueueDepth = 32;
++
++            /* connect to control service */
++        connect.ServiceID = WMI_CONTROL_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_CONTROL_PRI,
++                                       "WMI CONTROL");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* for the remaining data services set the connection flag to reduce dribbling,
++             * if configured to do so */
++        if (reduce_credit_dribble) {
++            connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
++            /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
++             * of 0-3 */
++            connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
++            connect.ConnectionFlags |=
++                        ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
++        }
++            /* connect to best-effort service */
++        connect.ServiceID = WMI_DATA_BE_SVC;
++
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_BEST_EFFORT_PRI,
++                                       "WMI DATA BE");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to back-ground
++             * map this to WMI LOW_PRI */
++        connect.ServiceID = WMI_DATA_BK_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_LOW_PRI,
++                                       "WMI DATA BK");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to Video service, map this to
++             * to HI PRI */
++        connect.ServiceID = WMI_DATA_VI_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_HIGH_PRI,
++                                       "WMI DATA VI");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* connect to VO service, this is currently not
++             * mapped to a WMI priority stream due to historical reasons.
++             * WMI originally defined 3 priorities over 3 mailboxes
++             * We can change this when WMI is reworked so that priorities are not
++             * dependent on mailboxes */
++        connect.ServiceID = WMI_DATA_VO_SVC;
++        status = ar6000_connectservice(ar,
++                                       &connect,
++                                       WMI_HIGHEST_PRI,
++                                       "WMI DATA VO");
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0);
++        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0);
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        return (-EIO);
++    }
++
++    /*
++     * give our connected endpoints some buffers
++     */
++    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI));
++
++    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI));
++
++    /*
++     * We will post the receive buffers only for SPE testing and so we are
++     * making it conditional on the 'bypasswmi' flag.
++     */
++    if (bypasswmi) {
++        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI));
++        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI));
++    }
++
++        /* setup credit distribution */
++    ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
++
++    /* Since cookies are used for HTC transports, they should be */
++    /* initialized prior to enabling HTC.                        */
++    ar6000_cookie_init(ar);
++
++    /* start HTC */
++    status = HTCStart(ar->arHtcTarget);
++
++    if (status != A_OK) {
++        if (ar->arWmiEnabled == TRUE) {
++            wmi_shutdown(ar->arWmi);
++            ar->arWmiEnabled = FALSE;
++            ar->arWmi = NULL;
++        }
++        ar6000_cookie_cleanup(ar);
++        return -EIO;
++    }
++
++    if (!bypasswmi) {
++        /* Wait for Wmi event to be ready */
++        timeleft = wait_event_interruptible_timeout(arEvent,
++            (ar->arWmiReady == TRUE), wmitimeout * HZ);
++
++        if(!timeleft || signal_pending(current))
++        {
++            AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n");
++#if defined(DWSIM) /* TBDXXX */
++            AR_DEBUG_PRINTF(".....but proceed anyway.\n");
++#else
++            return -EIO;
++#endif
++        }
++
++        AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__);
++
++        /* Communicate the wmi protocol verision to the target */
++        if ((ar6000_set_host_app_area(ar)) != A_OK) {
++            AR_DEBUG_PRINTF("Unable to set the host app area\n");
++        }
++    }
++
++    ar->arNumDataEndPts = 1;
++
++    return(0);
++}
++
++
++void
++ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arBitRate = rateKbps;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_ratemask_rx(void *devt, A_UINT16 ratemask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arRateMask = ratemask;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arTxPwr = txPwr;
++    wake_up(&arEvent);
++}
++
++
++void
++ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
++    ar->arNumChannels = numChan;
++
++    wake_up(&arEvent);
++}
++
++A_UINT8
++ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
++{
++    AR_SOFTC_T      *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8         *datap;
++    ATH_MAC_HDR     *macHdr;
++    A_UINT32         i, eptMap;
++
++    (*mapNo) = 0;
++    datap = A_NETBUF_DATA(skb);
++    macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
++    if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
++        return ENDPOINT_2;
++    }
++
++    eptMap = -1;
++    for (i = 0; i < ar->arNodeNum; i ++) {
++        if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
++            (*mapNo) = i + 1;
++            ar->arNodeMap[i].txPending ++;
++            return ar->arNodeMap[i].epId;
++        }
++
++        if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
++            eptMap = i;
++        }
++    }
++
++    if (eptMap == -1) {
++        eptMap = ar->arNodeNum;
++        ar->arNodeNum ++;
++        A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
++    }
++
++    A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
++
++    for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
++        if (!ar->arTxPending[i]) {
++            ar->arNodeMap[eptMap].epId = i;
++            break;
++        }
++        // No free endpoint is available, start redistribution on the inuse endpoints.
++        if (i == ENDPOINT_5) {
++            ar->arNodeMap[eptMap].epId = ar->arNexEpId;
++            ar->arNexEpId ++;
++            if (ar->arNexEpId > ENDPOINT_5) {
++                ar->arNexEpId = ENDPOINT_2;
++            }
++        }
++    }
++
++    (*mapNo) = eptMap + 1;
++    ar->arNodeMap[eptMap].txPending ++;
++
++    return ar->arNodeMap[eptMap].epId;
++}
++
++#ifdef DEBUG
++static void ar6000_dump_skb(struct sk_buff *skb)
++{
++   u_char *ch;
++   for (ch = A_NETBUF_DATA(skb);
++        (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) +
++        A_NETBUF_LEN(skb)); ch++)
++    {
++         AR_DEBUG_PRINTF("%2.2x ", *ch);
++    }
++    AR_DEBUG_PRINTF("\n");
++}
++#endif
++
++static int
++ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
++{
++    AR_SOFTC_T        *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED;
++    A_UINT32          mapNo = 0;
++    int               len;
++    struct ar_cookie *cookie;
++    A_BOOL            checkAdHocPsMapping = FALSE;
++
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
++    skb->list = NULL;
++#endif
++
++    AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n",
++                     (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb),
++                     A_NETBUF_LEN(skb));
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++     /* TCMD doesnt support any data, free the buf and return */
++    if(ar->arTargetMode == AR6000_TCMD_MODE) {
++        A_NETBUF_FREE(skb);
++        return 0;
++    }
++#endif
++    do {
++
++        if (ar->arWmiReady == FALSE && bypasswmi == 0) {
++            break;
++        }
++
++#ifdef BLOCK_TX_PATH_FLAG
++        if (blocktx) {
++            break;
++        }
++#endif /* BLOCK_TX_PATH_FLAG */
++
++        if (ar->arWmiEnabled) {
++            if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) {
++                struct sk_buff  *newbuf;
++                /*
++                 * We really should have gotten enough headroom but sometimes
++                 * we still get packets with not enough headroom.  Copy the packet.
++                 */
++                len = A_NETBUF_LEN(skb);
++                newbuf = A_NETBUF_ALLOC(len);
++                if (newbuf == NULL) {
++                    break;
++                }
++                A_NETBUF_PUT(newbuf, len);
++                A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
++                A_NETBUF_FREE(skb);
++                skb = newbuf;
++                /* fall through and assemble header */
++            }
++
++            if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
++                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n");
++                break;
++            }
++
++            if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) {
++                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n");
++                break;
++            }
++
++            if ((ar->arNetworkType == ADHOC_NETWORK) &&
++                ar->arIbssPsEnable && ar->arConnected) {
++                    /* flag to check adhoc mapping once we take the lock below: */
++                checkAdHocPsMapping = TRUE;
++
++            } else {
++                    /* get the stream mapping */
++                if (ar->arWmmEnabled) {
++                    streamID = wmi_get_stream_id(ar->arWmi,
++                                    wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI));
++                } else {
++                    streamID = WMI_BEST_EFFORT_PRI;
++                }
++            }
++
++        } else {
++            struct iphdr    *ipHdr;
++            /*
++             * the endpoint is directly based on the TOS field in the IP
++             * header **** only for testing ******
++             */
++            ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR);
++                /* here we map the TOS field to an endpoint number, this is for
++                 * the endpointping test application */
++            streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos);
++        }
++
++    } while (FALSE);
++
++        /* did we succeed ? */
++    if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) {
++            /* cleanup and exit */
++        A_NETBUF_FREE(skb);
++        AR6000_STAT_INC(ar, tx_dropped);
++        AR6000_STAT_INC(ar, tx_aborted_errors);
++        return 0;
++    }
++
++    cookie = NULL;
++
++        /* take the lock to protect driver data */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    do {
++
++        if (checkAdHocPsMapping) {
++            streamID = ar6000_ibss_map_epid(skb, dev, &mapNo);
++        }
++
++        A_ASSERT(streamID != WMI_NOT_MAPPED);
++
++            /* validate that the endpoint is connected */
++        if (arWMIStream2EndpointID(ar,streamID) == 0) {
++            AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID);
++            break;
++        }
++            /* allocate resource for this packet */
++        cookie = ar6000_alloc_cookie(ar);
++
++        if (cookie != NULL) {
++                /* update counts while the lock is held */
++            ar->arTxPending[streamID]++;
++            ar->arTotalTxDataPending++;
++        }
++
++    } while (FALSE);
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (cookie != NULL) {
++        cookie->arc_bp[0] = (A_UINT32)skb;
++        cookie->arc_bp[1] = mapNo;
++        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
++                               cookie,
++                               A_NETBUF_DATA(skb),
++                               A_NETBUF_LEN(skb),
++                               arWMIStream2EndpointID(ar,streamID),
++                               AR6K_DATA_PKT_TAG);
++
++#ifdef DEBUG
++        if (debugdriver >= 3) {
++            ar6000_dump_skb(skb);
++        }
++#endif
++            /* HTC interface is asynchronous, if this fails, cleanup will happen in
++             * the ar6000_tx_complete callback */
++        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
++    } else {
++            /* no packet to send, cleanup */
++        A_NETBUF_FREE(skb);
++        AR6000_STAT_INC(ar, tx_dropped);
++        AR6000_STAT_INC(ar, tx_aborted_errors);
++    }
++
++    return 0;
++}
++
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++static void
++tvsub(register struct timeval *out, register struct timeval *in)
++{
++    if((out->tv_usec -= in->tv_usec) < 0) {
++        out->tv_sec--;
++        out->tv_usec += 1000000;
++    }
++    out->tv_sec -= in->tv_sec;
++}
++
++void
++applyAPTCHeuristics(AR_SOFTC_T *ar)
++{
++    A_UINT32 duration;
++    A_UINT32 numbytes;
++    A_UINT32 throughput;
++    struct timeval ts;
++    A_STATUS status;
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
++        do_gettimeofday(&ts);
++        tvsub(&ts, &aptcTR.samplingTS);
++        duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
++        numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
++
++        if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
++            /* Initialize the time stamp and byte count */
++            aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
++            do_gettimeofday(&aptcTR.samplingTS);
++
++            /* Calculate and decide based on throughput thresholds */
++            throughput = ((numbytes * 8) / duration);
++            if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
++                /* Disable Sleep and schedule a timer */
++                A_ASSERT(ar->arWmiReady == TRUE);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
++                aptcTR.timerScheduled = TRUE;
++            }
++        }
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++static void
++ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *) Context;
++
++    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
++        if (!bypasswmi) {
++                /* under normal WMI if this is getting full, then something is running rampant
++                 * the host should not be exhausting the WMI queue with too many commands
++                 * the only exception to this is during testing using endpointping */
++
++            AR6000_SPIN_LOCK(&ar->arLock, 0);
++                /* set flag to handle subsequent messages */
++            ar->arWMIControlEpFull = TRUE;
++            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n");
++        }
++    } else {
++        /* one of the data endpoints queues is getting full..need to stop network stack
++         * the queue will resume after credits received */
++        netif_stop_queue(ar->arNetDev);
++    }
++}
++
++static void
++ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
++
++    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
++        /* FIXME: what do for it?  */
++    } else {
++        /* Wake up interface, rescheduling prevented.  */
++        if (ar->arConnected == TRUE || bypasswmi)
++            netif_wake_queue(ar->arNetDev);
++    }
++}
++
++static void
++ar6000_tx_complete(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T     *ar = (AR_SOFTC_T *)Context;
++    void           *cookie = (void *)pPacket->pPktContext;
++    struct sk_buff *skb = NULL;
++    A_UINT32        mapNo = 0;
++    A_STATUS        status;
++    struct ar_cookie * ar_cookie;
++    WMI_PRI_STREAM_ID streamID;
++    A_BOOL          wakeEvent = FALSE;
++
++    status = pPacket->Status;
++    ar_cookie = (struct ar_cookie *)cookie;
++    skb = (struct sk_buff *)ar_cookie->arc_bp[0];
++    streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
++    mapNo = ar_cookie->arc_bp[1];
++
++    A_ASSERT(skb);
++    A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb));
++
++    if (A_SUCCESS(status)) {
++        A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb));
++    }
++
++    AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ",
++                     (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
++                     pPacket->ActualLength,
++                     streamID);
++
++        /* lock the driver as we update internal state */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    ar->arTxPending[streamID]--;
++
++    if ((streamID != WMI_CONTROL_PRI) || bypasswmi) {
++        ar->arTotalTxDataPending--;
++    }
++
++    if (streamID == WMI_CONTROL_PRI)
++    {
++        if (ar->arWMIControlEpFull) {
++                /* since this packet completed, the WMI EP is no longer full */
++            ar->arWMIControlEpFull = FALSE;
++        }
++
++        if (ar->arTxPending[streamID] == 0) {
++            wakeEvent = TRUE;
++        }
++    }
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__,
++                        status);
++        AR6000_STAT_INC(ar, tx_errors);
++    } else {
++        AR_DEBUG2_PRINTF("OK\n");
++        AR6000_STAT_INC(ar, tx_packets);
++        ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb);
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++        aptcTR.bytesTransmitted += a_netbuf_to_len(skb);
++        applyAPTCHeuristics(ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++    }
++
++    // TODO this needs to be looked at
++    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
++        && (streamID != WMI_CONTROL_PRI) && mapNo)
++    {
++        mapNo --;
++        ar->arNodeMap[mapNo].txPending --;
++
++        if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
++            A_UINT32 i;
++            for (i = ar->arNodeNum; i > 0; i --) {
++                if (!ar->arNodeMap[i - 1].txPending) {
++                    A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
++                    ar->arNodeNum --;
++                } else {
++                    break;
++                }
++            }
++        }
++    }
++
++    /* Freeing a cookie should not be contingent on either of */
++    /* these flags, just if we have a cookie or not.           */
++    /* Can we even get here without a cookie? Fix later.       */
++    if (ar->arWmiReady == TRUE || (bypasswmi))
++    {
++        ar6000_free_cookie(ar, cookie);
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    /* lock is released, we can freely call other kernel APIs */
++
++        /* this indirectly frees the HTC_PACKET */
++    A_NETBUF_FREE(skb);
++
++    if (wakeEvent) {
++        wake_up(&arEvent);
++    }
++}
++
++/*
++ * Receive event handler.  This is called by HTC when a packet is received
++ */
++int pktcount;
++static void
++ar6000_rx(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
++    struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
++    int minHdrLen;
++    A_STATUS        status = pPacket->Status;
++    WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
++    HTC_ENDPOINT_ID   ept = pPacket->Endpoint;
++
++    A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
++
++    AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ",
++                    (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
++                    pPacket->ActualLength);
++    if (status != A_OK) {
++        AR_DEBUG2_PRINTF("ERR\n");
++    } else {
++        AR_DEBUG2_PRINTF("OK\n");
++    }
++
++        /* take lock to protect buffer counts
++         * and adaptive power throughput state */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    ar->arRxBuffers[streamID]--;
++
++    if (A_SUCCESS(status)) {
++        AR6000_STAT_INC(ar, rx_packets);
++        ar->arNetStats.rx_bytes += pPacket->ActualLength;
++#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
++        aptcTR.bytesReceived += a_netbuf_to_len(skb);
++        applyAPTCHeuristics(ar);
++#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
++
++        A_NETBUF_PUT(skb, pPacket->ActualLength +  HTC_HEADER_LEN);
++        A_NETBUF_PULL(skb, HTC_HEADER_LEN);
++
++#ifdef DEBUG
++        if (debugdriver >= 2) {
++            ar6000_dump_skb(skb);
++        }
++#endif /* DEBUG */
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (status != A_OK) {
++        AR6000_STAT_INC(ar, rx_errors);
++        A_NETBUF_FREE(skb);
++    } else if (ar->arWmiEnabled == TRUE) {
++        if (streamID == WMI_CONTROL_PRI) {
++           /*
++            * this is a wmi control msg
++            */
++            wmi_control_rx(ar->arWmi, skb);
++        } else {
++            WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
++            if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) {
++                /*
++                 * this is a wmi control msg
++                 */
++                /* strip off WMI hdr */
++                wmi_data_hdr_remove(ar->arWmi, skb);
++                wmi_control_rx(ar->arWmi, skb);
++            } else {
++                /*
++                 * this is a wmi data packet
++                 */
++                minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
++                            sizeof(ATH_LLC_SNAP_HDR);
++
++                if ((pPacket->ActualLength < minHdrLen) ||
++                    (pPacket->ActualLength > AR6000_BUFFER_SIZE))
++                {
++                    /*
++                     * packet is too short or too long
++                     */
++                    AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n");
++                    AR6000_STAT_INC(ar, rx_errors);
++                    AR6000_STAT_INC(ar, rx_length_errors);
++                    A_NETBUF_FREE(skb);
++                } else {
++                    if (ar->arWmmEnabled) {
++                        wmi_implicit_create_pstream(ar->arWmi, skb,
++                            DNLINK_TRAFFIC, UNDEFINED_PRI);
++                    }
++#if 0
++                    /* Access RSSI values here */
++                    AR_DEBUG_PRINTF("RSSI %d\n",
++                        ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi);
++#endif
++                    wmi_data_hdr_remove(ar->arWmi, skb);
++                    wmi_dot3_2_dix(ar->arWmi, skb);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++                    /*
++                     * extra push and memcpy, for eth_type_trans() of 2.4 kernel
++                     * will pull out hard_header_len bytes of the skb.
++                     */
++                    A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN);
++                    A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) +
++                             sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR));
++#endif
++                    if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
++                    {
++                        skb->dev = ar->arNetDev;
++                        skb->protocol = eth_type_trans(skb, ar->arNetDev);
++                        netif_rx(skb);
++                    }
++                    else
++                    {
++                        A_NETBUF_FREE(skb);
++                    }
++                }
++            }
++        }
++    } else {
++        if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
++        {
++            skb->dev = ar->arNetDev;
++            skb->protocol = eth_type_trans(skb, ar->arNetDev);
++            netif_rx(skb);
++        }
++        else
++        {
++            A_NETBUF_FREE(skb);
++        }
++    }
++
++    if (status != A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        ar6000_rx_refill(Context, ept);
++    }
++
++
++}
++
++static void
++ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
++{
++    AR_SOFTC_T  *ar = (AR_SOFTC_T *)Context;
++    void        *osBuf;
++    int         RxBuffers;
++    int         buffersToRefill;
++    HTC_PACKET  *pPacket;
++    WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint);
++
++    buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
++                                    (int)ar->arRxBuffers[streamId];
++
++    if (buffersToRefill <= 0) {
++            /* fast return, nothing to fill */
++        return;
++    }
++
++    AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
++                    buffersToRefill, Endpoint);
++
++    for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
++        osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
++        if (NULL == osBuf) {
++            break;
++        }
++            /* the HTC packet wrapper is at the head of the reserved area
++             * in the skb */
++        pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
++            /* set re-fill info */
++        SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
++            /* add this packet */
++        HTCAddReceivePkt(ar->arHtcTarget, pPacket);
++    }
++
++        /* update count */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++    ar->arRxBuffers[streamId] += RxBuffers;
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++}
++
++static struct net_device_stats *
++ar6000_get_stats(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    return &ar->arNetStats;
++}
++
++static struct iw_statistics *
++ar6000_get_iwstats(struct net_device * dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    struct iw_statistics * pIwStats = &ar->arIwStats;
++
++    if ((ar->arWmiReady == FALSE)
++    /*
++     * The in_atomic function is used to determine if the scheduling is
++     * allowed in the current context or not. This was introduced in 2.6
++     * From what I have read on the differences between 2.4 and 2.6, the
++     * 2.4 kernel did not support preemption and so this check might not
++     * be required for 2.4 kernels.
++     */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        || (in_atomic())
++#endif
++       )
++    {
++        pIwStats->status = 0;
++        pIwStats->qual.qual = 0;
++        pIwStats->qual.level =0;
++        pIwStats->qual.noise = 0;
++        pIwStats->discard.code =0;
++        pIwStats->discard.retries=0;
++        pIwStats->miss.beacon =0;
++        return pIwStats;
++    }
++    if (down_interruptible(&ar->arSem)) {
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++
++
++    ar->statsUpdatePending = TRUE;
++
++    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n");
++        up(&ar->arSem);
++        pIwStats->status = 0;
++        return pIwStats;
++    }
++    pIwStats->status = 1 ;
++    pIwStats->qual.qual = pStats->cs_aveBeacon_rssi;
++    pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161;  /* noise is -95 dBm */
++    pIwStats->qual.noise = pStats->noise_floor_calibation;
++    pIwStats->discard.code = pStats->rx_decrypt_err;
++    pIwStats->discard.retries = pStats->tx_retry_cnt;
++    pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
++    up(&ar->arSem);
++    return pIwStats;
++}
++
++void
++ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++    struct net_device *dev = ar->arNetDev;
++
++    ar->arWmiReady = TRUE;
++    wake_up(&arEvent);
++    A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
++    AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
++        dev->dev_addr[0], dev->dev_addr[1],
++        dev->dev_addr[2], dev->dev_addr[3],
++        dev->dev_addr[4], dev->dev_addr[5]);
++
++    ar->arPhyCapability = phyCap;
++}
++
++A_UINT8
++ar6000_iptos_to_userPriority(A_UINT8 *pkt)
++{
++    struct iphdr *ipHdr = (struct iphdr *)pkt;
++    A_UINT8 userPriority;
++
++    /*
++     * IP Tos format :
++     *      (Refer Pg 57 WMM-test-plan-v1.2)
++     * IP-TOS - 8bits
++     *          : DSCP(6-bits) ECN(2-bits)
++     *          : DSCP - P2 P1 P0 X X X
++     *              where (P2 P1 P0) form 802.1D
++     */
++    userPriority = ipHdr->tos >> 5;
++    return (userPriority & 0x7);
++}
++
++void
++ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
++                     A_UINT16 listenInterval, A_UINT16 beaconInterval,
++                     NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
++                     A_UINT8 assocReqLen, A_UINT8 assocRespLen,
++                     A_UINT8 *assocInfo)
++{
++    union iwreq_data wrqu;
++    int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
++    static const char *tag1 = "ASSOCINFO(ReqIEs=";
++    static const char *tag2 = "ASSOCRESPIE=";
++    static const char *beaconIetag = "BEACONIE=";
++    char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)];
++    char *pos;
++    A_UINT8 key_op_ctrl;
++
++    A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
++    ar->arBssChannel = channel;
++
++    A_PRINTF("AR6000 connected event on freq %d ", channel);
++    A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
++            " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
++            " assocRespLen =%d\n",
++             bssid[0], bssid[1], bssid[2],
++             bssid[3], bssid[4], bssid[5],
++             listenInterval, beaconInterval,
++             beaconIeLen, assocReqLen, assocRespLen);
++    if (networkType & ADHOC_NETWORK) {
++        if (networkType & ADHOC_CREATOR) {
++            A_PRINTF("Network: Adhoc (Creator)\n");
++        } else {
++            A_PRINTF("Network: Adhoc (Joiner)\n");
++        }
++    } else {
++        A_PRINTF("Network: Infrastructure\n");
++    }
++
++    if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
++        AR_DEBUG_PRINTF("\nBeaconIEs= ");
++
++        beacon_ie_pos = 0;
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", beaconIetag);
++        pos = buf + 9;
++        for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++    if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
++    {
++        assoc_resp_ie_pos = beaconIeLen + assocReqLen +
++                            sizeof(A_UINT16)  +  /* capinfo*/
++                            sizeof(A_UINT16)  +  /* status Code */
++                            sizeof(A_UINT16)  ;  /* associd */
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", tag2);
++        pos = buf + 12;
++        AR_DEBUG_PRINTF("\nAssocRespIEs= ");
++        /*
++         * The Association Response Frame w.o. the WLAN header is delivered to
++         * the host, so skip over to the IEs
++         */
++        for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
++        {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++    if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
++        /*
++         * assoc Request includes capability and listen interval. Skip these.
++         */
++        assoc_req_ie_pos =  beaconIeLen +
++                            sizeof(A_UINT16)  +  /* capinfo*/
++                            sizeof(A_UINT16);    /* listen interval */
++
++        A_MEMZERO(buf, sizeof(buf));
++        sprintf(buf, "%s", tag1);
++        pos = buf + 17;
++        AR_DEBUG_PRINTF("AssocReqIEs= ");
++        for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
++            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++            sprintf(pos, "%2.2x", assocInfo[i]);
++            pos += 2;;
++        }
++        AR_DEBUG_PRINTF("\n");
++
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++
++#ifdef USER_KEYS
++    if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
++        ar->user_saved_keys.keyOk == TRUE)
++    {
++
++        key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
++        if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
++            key_op_ctrl &= ~KEY_OP_INIT_RSC;
++        } else {
++            key_op_ctrl |= KEY_OP_INIT_RSC;
++        }
++        ar6000_reinstall_keys(ar, key_op_ctrl);
++    }
++#endif /* USER_KEYS */
++
++        /* flush data queues */
++    ar6000_TxDataCleanup(ar);
++
++    netif_start_queue(ar->arNetDev);
++
++    if ((OPEN_AUTH == ar->arDot11AuthMode) &&
++        (NONE_AUTH == ar->arAuthMode)      &&
++        (WEP_CRYPT == ar->arPairwiseCrypto))
++    {
++        if (!ar->arConnected) {
++            ar6000_install_static_wep_keys(ar);
++        }
++    }
++
++    ar->arConnected  = TRUE;
++    ar->arConnectPending = FALSE;
++
++    reconnect_flag = 0;
++
++    A_MEMZERO(&wrqu, sizeof(wrqu));
++    A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
++    wrqu.addr.sa_family = ARPHRD_ETHER;
++    wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
++    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
++        A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
++        ar->arNodeNum = 0;
++        ar->arNexEpId = ENDPOINT_2;
++    }
++
++}
++
++void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
++{
++    A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
++    ar->arNumDataEndPts = num;
++}
++
++void
++ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
++                        A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
++{
++    A_UINT8 i;
++
++    A_PRINTF("AR6000 disconnected");
++    if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
++        A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
++                 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
++    }
++    A_PRINTF("\n");
++
++    AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason);
++    AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus);
++    AR_DEBUG_PRINTF("\nAssocResp Frame = %s",
++                    assocRespLen ? " " : "NULL");
++    for (i = 0; i < assocRespLen; i++) {
++        if (!(i % 0x10)) {
++            AR_DEBUG_PRINTF("\n");
++        }
++        AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
++    }
++    AR_DEBUG_PRINTF("\n");
++    /*
++     * If the event is due to disconnect cmd from the host, only they the target
++     * would stop trying to connect. Under any other condition, target would
++     * keep trying to connect.
++     *
++     */
++    if( reason == DISCONNECT_CMD)
++    {
++        ar->arConnectPending = FALSE;
++    } else {
++        ar->arConnectPending = TRUE;
++        if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
++            ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
++            ar->arConnected = TRUE;
++            return;
++        }
++    }
++    ar->arConnected = FALSE;
++
++    if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
++        reconnect_flag = 0;
++    }
++
++#ifdef USER_KEYS
++    if (reason != CSERV_DISCONNECT)
++    {
++        ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++        ar->user_key_ctrl      = 0;
++    }
++#endif /* USER_KEYS */
++
++    netif_stop_queue(ar->arNetDev);
++    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
++    ar->arBssChannel = 0;
++    ar->arBeaconInterval = 0;
++
++    ar6000_TxDataCleanup(ar);
++}
++
++void
++ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
++{
++    A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
++    ar->arRegCode = regCode;
++}
++
++void
++ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
++{
++    static const char *tag = "PRE-AUTH";
++    char buf[128];
++    union iwreq_data wrqu;
++    int i;
++
++    AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n");
++    for (i=0; i < numAps; info++, i++) {
++        AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
++            info->bssid[0], info->bssid[1], info->bssid[2],
++            info->bssid[3], info->bssid[4], info->bssid[5]);
++        if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
++            AR_DEBUG_PRINTF("preauth-cap");
++        }
++        if (info->bssFlags & WMI_PMKID_VALID_BSS) {
++            AR_DEBUG_PRINTF(" pmkid-valid\n");
++            continue;           /* we skip bss if the pmkid is already valid */
++        }
++        AR_DEBUG_PRINTF("\n");
++        snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
++                 tag,
++                 info->bssid[0], info->bssid[1], info->bssid[2],
++                 info->bssid[3], info->bssid[4], info->bssid[5],
++                 i, info->bssFlags);
++        A_MEMZERO(&wrqu, sizeof(wrqu));
++        wrqu.data.length = strlen(buf);
++        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++    }
++}
++
++void
++ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
++{
++    static const char *tag = "MLME-MICHAELMICFAILURE.indication";
++    char buf[128];
++    union iwreq_data wrqu;
++
++    A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
++             keyid, ismcast ? "multi": "uni");
++    snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid,
++             ismcast ? "multi" : "uni");
++    memset(&wrqu, 0, sizeof(wrqu));
++    wrqu.data.length = strlen(buf);
++    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++}
++
++void
++ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
++{
++      AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status);
++
++      ar->scan_complete = 1;
++      wake_up_interruptible(&ar6000_scan_queue);
++}
++
++void
++ar6000_targetStats_event(AR_SOFTC_T *ar,  WMI_TARGET_STATS *pTarget)
++{
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    A_UINT8 ac;
++
++    /*A_PRINTF("AR6000 updating target stats\n");*/
++    pStats->tx_packets          += pTarget->txrxStats.tx_stats.tx_packets;
++    pStats->tx_bytes            += pTarget->txrxStats.tx_stats.tx_bytes;
++    pStats->tx_unicast_pkts     += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
++    pStats->tx_unicast_bytes    += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
++    pStats->tx_multicast_pkts   += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
++    pStats->tx_multicast_bytes  += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
++    pStats->tx_broadcast_pkts   += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
++    pStats->tx_broadcast_bytes  += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
++    pStats->tx_rts_success_cnt  += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
++    for(ac = 0; ac < WMM_NUM_AC; ac++)
++        pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
++    pStats->tx_errors           += pTarget->txrxStats.tx_stats.tx_errors;
++    pStats->tx_failed_cnt       += pTarget->txrxStats.tx_stats.tx_failed_cnt;
++    pStats->tx_retry_cnt        += pTarget->txrxStats.tx_stats.tx_retry_cnt;
++    pStats->tx_rts_fail_cnt     += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
++    pStats->tx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
++
++    pStats->rx_packets          += pTarget->txrxStats.rx_stats.rx_packets;
++    pStats->rx_bytes            += pTarget->txrxStats.rx_stats.rx_bytes;
++    pStats->rx_unicast_pkts     += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
++    pStats->rx_unicast_bytes    += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
++    pStats->rx_multicast_pkts   += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
++    pStats->rx_multicast_bytes  += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
++    pStats->rx_broadcast_pkts   += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
++    pStats->rx_broadcast_bytes  += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
++    pStats->rx_fragment_pkt     += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
++    pStats->rx_errors           += pTarget->txrxStats.rx_stats.rx_errors;
++    pStats->rx_crcerr           += pTarget->txrxStats.rx_stats.rx_crcerr;
++    pStats->rx_key_cache_miss   += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
++    pStats->rx_decrypt_err      += pTarget->txrxStats.rx_stats.rx_decrypt_err;
++    pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
++    pStats->rx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
++
++
++    pStats->tkip_local_mic_failure
++                                += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
++    pStats->tkip_counter_measures_invoked
++                                += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
++    pStats->tkip_replays        += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
++    pStats->tkip_format_errors  += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
++    pStats->ccmp_format_errors  += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
++    pStats->ccmp_replays        += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
++
++
++    pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
++    pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
++
++    pStats->cs_bmiss_cnt        += pTarget->cservStats.cs_bmiss_cnt;
++    pStats->cs_lowRssi_cnt      += pTarget->cservStats.cs_lowRssi_cnt;
++    pStats->cs_connect_cnt      += pTarget->cservStats.cs_connect_cnt;
++    pStats->cs_disconnect_cnt   += pTarget->cservStats.cs_disconnect_cnt;
++    pStats->cs_aveBeacon_snr    = pTarget->cservStats.cs_aveBeacon_snr;
++    pStats->cs_aveBeacon_rssi   = pTarget->cservStats.cs_aveBeacon_rssi;
++    pStats->cs_lastRoam_msec    = pTarget->cservStats.cs_lastRoam_msec;
++    pStats->cs_snr              = pTarget->cservStats.cs_snr;
++    pStats->cs_rssi             = pTarget->cservStats.cs_rssi;
++
++    pStats->lq_val              = pTarget->lqVal;
++
++    pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
++    pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
++    pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
++    pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
++
++    ar->statsUpdatePending = FALSE;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_rssiThreshold_event(AR_SOFTC_T *ar,  WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
++{
++    USER_RSSI_THOLD userRssiThold;
++
++    userRssiThold.tag = rssi_map[newThreshold].tag;
++    userRssiThold.rssi = rssi;
++    AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d  rssi = %d\n", newThreshold, userRssiThold.tag, rssi);
++#ifdef SEND_EVENT_TO_APP
++    ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
++#endif
++}
++
++
++void
++ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
++{
++    if (source == APP_HB_CHALLENGE) {
++        /* Report it to the app in case it wants a positive acknowledgement */
++#ifdef SEND_EVENT_TO_APP
++        ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
++                                 (A_UINT8 *)&cookie, sizeof(cookie));
++#endif
++    } else {
++        /* This would ignore the replys that come in after their due time */
++        if (cookie == ar->arHBChallengeResp.seqNum) {
++            ar->arHBChallengeResp.outstanding = FALSE;
++        }
++    }
++}
++
++
++void
++ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
++{
++    char    *errString[] = {
++                [WMI_TARGET_PM_ERR_FAIL]    "WMI_TARGET_PM_ERR_FAIL",
++                [WMI_TARGET_KEY_NOT_FOUND]  "WMI_TARGET_KEY_NOT_FOUND",
++                [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
++                [WMI_TARGET_BMISS]          "WMI_TARGET_BMISS",
++                [WMI_PSDISABLE_NODE_JOIN]   "WMI_PSDISABLE_NODE_JOIN"
++                };
++
++    A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
++
++    /* One error is reported at a time, and errorval is a bitmask */
++    if(errorVal & (errorVal - 1))
++       return;
++
++    A_PRINTF("AR6000 Error type = ");
++    switch(errorVal)
++    {
++        case WMI_TARGET_PM_ERR_FAIL:
++        case WMI_TARGET_KEY_NOT_FOUND:
++        case WMI_TARGET_DECRYPTION_ERR:
++        case WMI_TARGET_BMISS:
++        case WMI_PSDISABLE_NODE_JOIN:
++            A_PRINTF("%s\n", errString[errorVal]);
++            break;
++        default:
++            A_PRINTF("INVALID\n");
++            break;
++    }
++
++}
++
++
++void
++ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
++                 A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
++{
++    WMM_TSPEC_IE    *tspecIe;
++
++    /*
++     * This is the TSPEC IE suggestion from AP.
++     * Suggestion provided by AP under some error
++     * cases, could be helpful for the host app.
++     * Check documentation.
++     */
++    tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
++
++    /*
++     * What do we do, if we get TSPEC rejection? One thought
++     * that comes to mind is implictly delete the pstream...
++     */
++    A_PRINTF("AR6000 CAC notification. "
++                "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
++                 ac, cacIndication, statusCode);
++}
++
++#define AR6000_PRINT_BSSID(_pBss)  do {     \
++        A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
++                 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
++                 (_pBss)[4],(_pBss)[5]);  \
++} while(0)
++
++void
++ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
++{
++    A_UINT8 i;
++
++    A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
++              pTbl->numEntries, pTbl->roamMode);
++    for (i= 0; i < pTbl->numEntries; i++) {
++        A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
++            pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
++            pTbl->bssRoamInfo[i].bssid[2],
++            pTbl->bssRoamInfo[i].bssid[3],
++            pTbl->bssRoamInfo[i].bssid[4],
++            pTbl->bssRoamInfo[i].bssid[5]);
++        A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
++                 " BIAS %d\n",
++            pTbl->bssRoamInfo[i].rssi,
++            pTbl->bssRoamInfo[i].rssidt,
++            pTbl->bssRoamInfo[i].last_rssi,
++            pTbl->bssRoamInfo[i].util,
++            pTbl->bssRoamInfo[i].roam_util,
++            pTbl->bssRoamInfo[i].bias);
++    }
++}
++
++void
++ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
++{
++    A_UINT8 i,j;
++
++    /*Each event now contains exactly one filter, see bug 26613*/
++    A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num,                 wow_reply->num_filters);
++    A_PRINTF("wow mode = %s host mode = %s\n",
++            (wow_reply->wow_mode == 0? "disabled":"enabled"),
++            (wow_reply->host_mode == 1 ? "awake":"asleep"));
++
++
++    /*If there are no patterns, the reply will only contain generic
++      WoW information. Pattern information will exist only if there are
++      patterns present. Bug 26716*/
++
++   /* If this event contains pattern information, display it*/
++    if (wow_reply->this_filter_num) {
++        i=0;
++        A_PRINTF("id=%d size=%d offset=%d\n",
++                    wow_reply->wow_filters[i].wow_filter_id,
++                    wow_reply->wow_filters[i].wow_filter_size,
++                    wow_reply->wow_filters[i].wow_filter_offset);
++       A_PRINTF("wow pattern = ");
++       for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
++             A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
++        }
++
++        A_PRINTF("\nwow mask = ");
++        for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
++            A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
++        }
++        A_PRINTF("\n");
++    }
++}
++
++/*
++ * Report the Roaming related data collected on the target
++ */
++void
++ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
++{
++    A_PRINTF("Disconnect Data : BSSID: ");
++    AR6000_PRINT_BSSID(p->disassoc_bssid);
++    A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
++             p->disassoc_bss_rssi,p->disassoc_time,
++             p->no_txrx_time);
++    A_PRINTF("Connect Data: BSSID: ");
++    AR6000_PRINT_BSSID(p->assoc_bssid);
++    A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
++             p->assoc_bss_rssi,p->assoc_time,
++             p->allow_txrx_time);
++    A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\
++             "First Data Tx Time (after Assoc) %d\n",
++             p->last_data_txrx_time, p->first_data_txrx_time);
++}
++
++void
++ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
++{
++    switch (p->roamDataType) {
++        case ROAM_DATA_TIME:
++            ar6000_display_roam_time(&p->u.roamTime);
++            break;
++        default:
++            break;
++    }
++}
++
++void
++ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
++{
++    struct sk_buff *skb;
++    WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
++
++
++    if (!ar->arMgmtFilter) {
++        return;
++    }
++    if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
++        (bih->frameType != BEACON_FTYPE))  ||
++        ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
++        (bih->frameType != PROBERESP_FTYPE)))
++    {
++        return;
++    }
++
++    if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
++
++        A_NETBUF_PUT(skb, len);
++        A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
++        skb->dev = ar->arNetDev;
++      printk("MAC RAW...\n");
++//        skb->mac.raw = A_NETBUF_DATA(skb);
++        skb->ip_summed = CHECKSUM_NONE;
++        skb->pkt_type = PACKET_OTHERHOST;
++        skb->protocol = __constant_htons(0x0019);
++        netif_rx(skb);
++    }
++}
++
++A_UINT32 wmiSendCmdNum;
++
++A_STATUS
++ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID)
++{
++    AR_SOFTC_T       *ar = (AR_SOFTC_T *)devt;
++    A_STATUS         status = A_OK;
++    struct ar_cookie *cookie = NULL;
++    int i;
++
++        /* take lock to protect ar6000_alloc_cookie() */
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    do {
++
++        AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n",
++                         (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID);
++
++        if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) {
++                /* control endpoint is full, don't allocate resources, we
++                 * are just going to drop this packet */
++            cookie = NULL;
++            AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n",
++                    (A_UINT32)osbuf, A_NETBUF_LEN(osbuf));
++        } else {
++            cookie = ar6000_alloc_cookie(ar);
++        }
++
++        if (cookie == NULL) {
++            status = A_NO_MEMORY;
++            break;
++        }
++
++        if(logWmiRawMsgs) {
++            A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
++            for(i = 0; i < a_netbuf_to_len(osbuf); i++)
++                A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
++            A_PRINTF("\n");
++        }
++
++        wmiSendCmdNum++;
++
++    } while (FALSE);
++
++    if (cookie != NULL) {
++            /* got a structure to send it out on */
++        ar->arTxPending[streamID]++;
++
++        if (streamID != WMI_CONTROL_PRI) {
++            ar->arTotalTxDataPending++;
++        }
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    if (cookie != NULL) {
++        cookie->arc_bp[0] = (A_UINT32)osbuf;
++        cookie->arc_bp[1] = 0;
++        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
++                               cookie,
++                               A_NETBUF_DATA(osbuf),
++                               A_NETBUF_LEN(osbuf),
++                               arWMIStream2EndpointID(ar,streamID),
++                               AR6K_CONTROL_PKT_TAG);
++            /* this interface is asynchronous, if there is an error, cleanup will happen in the
++             * TX completion callback */
++        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
++        status = A_OK;
++    }
++
++    return status;
++}
++
++/* indicate tx activity or inactivity on a WMI stream */
++void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
++{
++    AR_SOFTC_T  *ar = (AR_SOFTC_T *)devt;
++    WMI_PRI_STREAM_ID streamid;
++
++    if (ar->arWmiEnabled) {
++        streamid = wmi_get_stream_id(ar->arWmi, TrafficClass);
++    } else {
++            /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
++             * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */
++        streamid = (WMI_PRI_STREAM_ID)TrafficClass;
++    }
++
++        /* notify HTC, this may cause credit distribution changes */
++
++    HTCIndicateActivityChange(ar->arHtcTarget,
++                              arWMIStream2EndpointID(ar,streamid),
++                              Active);
++
++}
++
++module_init(ar6000_init_module);
++module_exit(ar6000_cleanup_module);
++
++/* Init cookie queue */
++static void
++ar6000_cookie_init(AR_SOFTC_T *ar)
++{
++    A_UINT32    i;
++
++    ar->arCookieList = NULL;
++    A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
++
++    for (i = 0; i < MAX_COOKIE_NUM; i++) {
++        ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
++    }
++}
++
++/* cleanup cookie queue */
++static void
++ar6000_cookie_cleanup(AR_SOFTC_T *ar)
++{
++    /* It is gone .... */
++    ar->arCookieList = NULL;
++}
++
++/* Init cookie queue */
++static void
++ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
++{
++    /* Insert first */
++    A_ASSERT(ar != NULL);
++    A_ASSERT(cookie != NULL);
++    cookie->arc_list_next = ar->arCookieList;
++    ar->arCookieList = cookie;
++}
++
++/* cleanup cookie queue */
++static struct ar_cookie *
++ar6000_alloc_cookie(AR_SOFTC_T  *ar)
++{
++    struct ar_cookie   *cookie;
++
++    cookie = ar->arCookieList;
++    if(cookie != NULL)
++    {
++        ar->arCookieList = cookie->arc_list_next;
++    }
++
++    return cookie;
++}
++
++#ifdef SEND_EVENT_TO_APP
++/*
++ * This function is used to send event which come from taget to
++ * the application. The buf which send to application is include
++ * the event ID and event content.
++ */
++#define EVENT_ID_LEN   2
++void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
++                              A_UINT8 *datap, int len)
++{
++
++#if (WIRELESS_EXT >= 15)
++
++/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
++
++    char *buf;
++    A_UINT16 size;
++    union iwreq_data wrqu;
++
++    size = len + EVENT_ID_LEN;
++
++    if (size > IW_CUSTOM_MAX) {
++        AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
++                eventId, size, IW_CUSTOM_MAX);
++        return;
++    }
++
++    buf = A_MALLOC_NOWAIT(size);
++    A_MEMZERO(buf, size);
++    A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
++    A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
++
++    //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size);
++    A_MEMZERO(&wrqu, sizeof(wrqu));
++    wrqu.data.length = size;
++    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
++
++    A_FREE(buf);
++#endif
++
++
++}
++#endif
++
++
++void
++ar6000_tx_retry_err_event(void *devt)
++{
++    AR_DEBUG2_PRINTF("Tx retries reach maximum!\n");
++}
++
++void
++ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
++{
++    AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr);
++}
++
++void
++ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
++{
++    AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq);
++}
++
++
++
++A_UINT32
++a_copy_to_user(void *to, const void *from, A_UINT32 n)
++{
++    return(copy_to_user(to, from, n));
++}
++
++A_UINT32
++a_copy_from_user(void *to, const void *from, A_UINT32 n)
++{
++    return(copy_from_user(to, from, n));
++}
++
++
++A_STATUS
++ar6000_get_driver_cfg(struct net_device *dev,
++                        A_UINT16 cfgParam,
++                        void *result)
++{
++
++    A_STATUS    ret = 0;
++
++    switch(cfgParam)
++    {
++        case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
++           *((A_UINT32 *)result) = wlanNodeCaching;
++           break;
++        case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
++           *((A_UINT32 *)result) = logWmiRawMsgs;
++            break;
++        default:
++           ret = EINVAL;
++           break;
++    }
++
++    return ret;
++}
++
++void
++ar6000_keepalive_rx(void *devt, A_UINT8 configured)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++
++    ar->arKeepaliveConfigured = configured;
++    wake_up(&arEvent);
++}
++
++void
++ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList)
++{
++    A_UINT8 i, j;
++
++    A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
++
++    for (i = 0; i < numPMKID; i++) {
++        A_PRINTF("\nPMKID %d ", i);
++            for (j = 0; j < WMI_PMKID_LEN; j++) {
++                A_PRINTF("%2.2x", pmkidList->pmkid[j]);
++            }
++        pmkidList++;
++    }
++}
++
++#ifdef USER_KEYS
++static A_STATUS
++
++ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
++{
++    A_STATUS status = A_OK;
++    struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
++    struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
++    CRYPTO_TYPE  keyType = ar->user_saved_keys.keyType;
++
++    if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            goto _reinstall_keys_out;
++        }
++
++        if (uik->ik_keylen) {
++            status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
++                    ar->user_saved_keys.keyType, PAIRWISE_USAGE,
++                    uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
++                    uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG);
++        }
++
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
++    }
++
++    if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            goto _reinstall_keys_out;
++        }
++
++        if (bik->ik_keylen) {
++            status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
++                    ar->user_saved_keys.keyType, GROUP_USAGE,
++                    bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
++                    bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG);
++        }
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
++    }
++
++_reinstall_keys_out:
++    ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
++    ar->user_key_ctrl      = 0;
++
++    return status;
++}
++#endif /* USER_KEYS */
++
++
++void
++ar6000_dset_open_req(
++    void *context,
++    A_UINT32 id,
++    A_UINT32 targHandle,
++    A_UINT32 targReplyFn,
++    A_UINT32 targReplyArg)
++{
++}
++
++void
++ar6000_dset_close(
++    void *context,
++    A_UINT32 access_cookie)
++{
++    return;
++}
++
++void
++ar6000_dset_data_req(
++   void *context,
++   A_UINT32 accessCookie,
++   A_UINT32 offset,
++   A_UINT32 length,
++   A_UINT32 targBuf,
++   A_UINT32 targReplyFn,
++   A_UINT32 targReplyArg)
++{
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_drv.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_drv.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_drv.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_drv.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,360 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _AR6000_H_
++#define _AR6000_H_
++
++#include <linux/version.h>
++
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/skbuff.h>
++#include <linux/if_ether.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <net/iw_handler.h>
++#include <linux/if_arp.h>
++#include <linux/ip.h>
++#include <linux/semaphore.h>
++#include <linux/wireless.h>
++#include <linux/module.h>
++#include <asm/io.h>
++
++#include <a_config.h>
++#include <athdefs.h>
++#include "a_types.h"
++#include "a_osapi.h"
++#include "htc_api.h"
++#include "wmi.h"
++#include "a_drv.h"
++#include "bmi.h"
++#include <ieee80211.h>
++#include <ieee80211_ioctl.h>
++#include <wlan_api.h>
++#include <wmi_api.h>
++#include "gpio_api.h"
++#include "gpio.h"
++#include <host_version.h>
++#include <linux/rtnetlink.h>
++#include <linux/init.h>
++#include <linux/moduleparam.h>
++#include "AR6Khwreg.h"
++#include "ar6000_api.h"
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++#include <testcmd.h>
++#endif
++
++#include "targaddrs.h"
++#include "dbglog_api.h"
++#include "ar6000_diag.h"
++#include "common_drv.h"
++
++#ifndef  __dev_put
++#define  __dev_put(dev) dev_put(dev)
++#endif
++
++#ifdef USER_KEYS
++
++#define USER_SAVEDKEYS_STAT_INIT     0
++#define USER_SAVEDKEYS_STAT_RUN      1
++
++// TODO this needs to move into the AR_SOFTC struct
++struct USER_SAVEDKEYS {
++    struct ieee80211req_key   ucast_ik;
++    struct ieee80211req_key   bcast_ik;
++    CRYPTO_TYPE               keyType;
++    A_BOOL                    keyOk;
++};
++#endif
++
++#define DBG_INFO              0x00000001
++#define DBG_ERROR             0x00000002
++#define DBG_WARNING           0x00000004
++#define DBG_SDIO              0x00000008
++#define DBG_HIF                       0x00000010
++#define DBG_HTC                       0x00000020
++#define DBG_WMI                       0x00000040
++#define DBG_WMI2              0x00000080
++#define DBG_DRIVER            0x00000100
++
++#define DBG_DEFAULTS  (DBG_ERROR|DBG_WARNING)
++
++
++#ifdef DEBUG
++#define AR_DEBUG_PRINTF(args...)        if (debugdriver) A_PRINTF(args);
++#define AR_DEBUG2_PRINTF(args...)        if (debugdriver >= 2) A_PRINTF(args);
++extern int debugdriver;
++#else
++#define AR_DEBUG_PRINTF(args...)
++#define AR_DEBUG2_PRINTF(args...)
++#endif
++
++A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define       MAX_AR6000                        1
++#define AR6000_MAX_RX_BUFFERS             16
++#define AR6000_BUFFER_SIZE                1664
++#define AR6000_TX_TIMEOUT                 10
++#define       AR6000_ETH_ADDR_LEN               6
++#define       AR6000_MAX_ENDPOINTS              4
++#define MAX_NODE_NUM                      15
++#define MAX_COOKIE_NUM                    150
++#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT        1
++#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT  1
++
++enum {
++    DRV_HB_CHALLENGE = 0,
++    APP_HB_CHALLENGE
++};
++
++/* HTC RAW streams */
++typedef enum _HTC_RAW_STREAM_ID {
++    HTC_RAW_STREAM_NOT_MAPPED = -1,
++    HTC_RAW_STREAM_0 = 0,
++    HTC_RAW_STREAM_1 = 1,
++    HTC_RAW_STREAM_2 = 2,
++    HTC_RAW_STREAM_3 = 3,
++    HTC_RAW_STREAM_NUM_MAX
++} HTC_RAW_STREAM_ID;
++
++#define RAW_HTC_READ_BUFFERS_NUM    4
++#define RAW_HTC_WRITE_BUFFERS_NUM   4
++
++typedef struct {
++    int currPtr;
++    int length;
++    unsigned char data[AR6000_BUFFER_SIZE];
++    HTC_PACKET    HTCPacket;
++} raw_htc_buffer;
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/*
++ *  add TCMD_MODE besides wmi and bypasswmi
++ *  in TCMD_MODE, only few TCMD releated wmi commands
++ *  counld be hanlder
++ */
++enum {
++    AR6000_WMI_MODE = 0,
++    AR6000_BYPASS_MODE,
++    AR6000_TCMD_MODE,
++    AR6000_WLAN_MODE
++};
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++struct ar_wep_key {
++    A_UINT8                 arKeyIndex;
++    A_UINT8                 arKeyLen;
++    A_UINT8                 arKey[64];
++} ;
++
++struct ar_node_mapping {
++    A_UINT8                 macAddress[6];
++    A_UINT8                 epId;
++    A_UINT8                 txPending;
++};
++
++struct ar_cookie {
++    A_UINT32               arc_bp[2];    /* Must be first field */
++    HTC_PACKET             HtcPkt;       /* HTC packet wrapper */
++    struct ar_cookie *arc_list_next;
++};
++
++struct ar_hb_chlng_resp {
++    A_TIMER                 timer;
++    A_UINT32                frequency;
++    A_UINT32                seqNum;
++    A_BOOL                  outstanding;
++    A_UINT8                 missCnt;
++    A_UINT8                 missThres;
++};
++
++typedef struct ar6_softc {
++    struct net_device       *arNetDev;    /* net_device pointer */
++    void                    *arWmi;
++    int                     arTxPending[WMI_PRI_MAX_COUNT];
++    int                     arTotalTxDataPending;
++    A_UINT8                 arNumDataEndPts;
++    A_BOOL                  arWmiEnabled;
++    A_BOOL                  arWmiReady;
++    A_BOOL                  arConnected;
++    A_BOOL                  arRadioSwitch;
++    HTC_HANDLE              arHtcTarget;
++    void                    *arHifDevice;
++    spinlock_t              arLock;
++    struct semaphore        arSem;
++    int                     arRxBuffers[WMI_PRI_MAX_COUNT];
++    int                     arSsidLen;
++    u_char                  arSsid[32];
++    A_UINT8                 arNetworkType;
++    A_UINT8                 arDot11AuthMode;
++    A_UINT8                 arAuthMode;
++    A_UINT8                 arPairwiseCrypto;
++    A_UINT8                 arPairwiseCryptoLen;
++    A_UINT8                 arGroupCrypto;
++    A_UINT8                 arGroupCryptoLen;
++    A_UINT8                 arDefTxKeyIndex;
++    struct ar_wep_key       arWepKeyList[WMI_MAX_KEY_INDEX + 1];
++    A_UINT8                 arBssid[6];
++    A_UINT8                 arReqBssid[6];
++    A_UINT16                arChannelHint;
++    A_UINT16                arBssChannel;
++    A_UINT16                arListenInterval;
++    struct ar6000_version   arVersion;
++    A_UINT32                arTargetType;
++    A_INT8                  arRssi;
++    A_UINT8                 arTxPwr;
++    A_BOOL                  arTxPwrSet;
++    A_INT32                 arBitRate;
++    struct net_device_stats arNetStats;
++    struct iw_statistics      arIwStats;
++    A_INT8                  arNumChannels;
++    A_UINT16                arChannelList[32];
++    A_UINT32                arRegCode;
++    A_BOOL                  statsUpdatePending;
++    TARGET_STATS            arTargetStats;
++    A_INT8                  arMaxRetries;
++    A_UINT8                 arPhyCapability;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    A_UINT8                 tcmdRxReport;
++    A_UINT32                tcmdRxTotalPkt;
++    A_INT32                 tcmdRxRssi;
++    A_UINT32                tcmdPm;
++   A_UINT32                 arTargetMode;
++#endif
++    AR6000_WLAN_STATE       arWlanState;
++    struct ar_node_mapping  arNodeMap[MAX_NODE_NUM];
++    A_UINT8                 arIbssPsEnable;
++    A_UINT8                 arNodeNum;
++    A_UINT8                 arNexEpId;
++    struct ar_cookie        *arCookieList;
++    A_UINT16                arRateMask;
++    A_UINT8                 arSkipScan;
++    A_UINT16                arBeaconInterval;
++    A_BOOL                  arConnectPending;
++    A_BOOL                  arWmmEnabled;
++    struct ar_hb_chlng_resp arHBChallengeResp;
++    A_UINT8                 arKeepaliveConfigured;
++    A_UINT32                arMgmtFilter;
++    HTC_ENDPOINT_ID         arWmi2EpMapping[WMI_PRI_MAX_COUNT];
++    WMI_PRI_STREAM_ID       arEp2WmiMapping[ENDPOINT_MAX];
++#ifdef HTC_RAW_INTERFACE
++    HTC_ENDPOINT_ID         arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX];
++    HTC_RAW_STREAM_ID       arEp2RawMapping[ENDPOINT_MAX];
++    struct semaphore        raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX];
++    struct semaphore        raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX];
++    wait_queue_head_t       raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX];
++    wait_queue_head_t       raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX];
++    raw_htc_buffer          *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM];
++    raw_htc_buffer          *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM];
++    A_BOOL                  write_buffer_available[HTC_RAW_STREAM_NUM_MAX];
++    A_BOOL                  read_buffer_available[HTC_RAW_STREAM_NUM_MAX];
++#endif
++    A_BOOL                  arRawIfInit;
++    int                     arDeviceIndex;
++    COMMON_CREDIT_STATE_INFO arCreditStateInfo;
++    A_BOOL                  arWMIControlEpFull;
++    A_BOOL                  dbgLogFetchInProgress;
++    A_UCHAR                 log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE];
++    A_UINT32                log_cnt;
++    A_UINT32                dbglog_init_done;
++    A_UINT32                arConnectCtrlFlags;
++      A_UINT32                scan_complete;
++#ifdef USER_KEYS
++    A_INT32                 user_savedkeys_stat;
++    A_UINT32                user_key_ctrl;
++    struct USER_SAVEDKEYS   user_saved_keys;
++#endif
++} AR_SOFTC_T;
++
++
++#define arWMIStream2EndpointID(ar,wmi)          (ar)->arWmi2EpMapping[(wmi)]
++#define arSetWMIStream2EndpointIDMap(ar,wmi,ep)  \
++{  (ar)->arWmi2EpMapping[(wmi)] = (ep); \
++   (ar)->arEp2WmiMapping[(ep)] = (wmi); }
++#define arEndpoint2WMIStreamID(ar,ep)           (ar)->arEp2WmiMapping[(ep)]
++
++#define arRawIfEnabled(ar) (ar)->arRawIfInit
++#define arRawStream2EndpointID(ar,raw)          (ar)->arRaw2EpMapping[(raw)]
++#define arSetRawStream2EndpointIDMap(ar,raw,ep)  \
++{  (ar)->arRaw2EpMapping[(raw)] = (ep); \
++   (ar)->arEp2RawMapping[(ep)] = (raw); }
++#define arEndpoint2RawStreamID(ar,ep)           (ar)->arEp2RawMapping[(ep)]
++
++struct ar_giwscan_param {
++    char    *current_ev;
++    char    *end_buf;
++    A_BOOL  firstPass;
++};
++
++#define AR6000_STAT_INC(ar, stat)       (ar->arNetStats.stat++)
++
++#define AR6000_SPIN_LOCK(lock, param)   do {                            \
++    if (irqs_disabled()) {                                              \
++        AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n");                 \
++    }                                                                   \
++    spin_lock_bh(lock);                                                 \
++} while (0)
++
++#define AR6000_SPIN_UNLOCK(lock, param) do {                            \
++    if (irqs_disabled()) {                                              \
++        AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n");              \
++    }                                                                   \
++    spin_unlock_bh(lock);                                               \
++} while (0)
++
++int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd);
++void ar6000_ioctl_iwsetup(struct iw_handler_def *def);
++void ar6000_gpio_init(void);
++void ar6000_init_profile_info(AR_SOFTC_T *ar);
++void ar6000_install_static_wep_keys(AR_SOFTC_T *ar);
++int ar6000_init(struct net_device *dev);
++int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar);
++A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar);
++
++#ifdef HTC_RAW_INTERFACE
++
++#ifndef __user
++#define __user
++#endif
++
++int ar6000_htc_raw_open(AR_SOFTC_T *ar);
++int ar6000_htc_raw_close(AR_SOFTC_T *ar);
++ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar,
++                            HTC_RAW_STREAM_ID StreamID,
++                            char __user *buffer, size_t count);
++ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar,
++                             HTC_RAW_STREAM_ID StreamID,
++                             char __user *buffer, size_t count);
++
++#endif /* HTC_RAW_INTERFACE */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _AR6000_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_raw_if.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_raw_if.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6000_raw_if.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6000_raw_if.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,440 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++#ifdef HTC_RAW_INTERFACE
++
++static void
++ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T        *ar = (AR_SOFTC_T *)Context;
++    raw_htc_buffer    *busy;
++    HTC_RAW_STREAM_ID streamID;
++
++    busy = (raw_htc_buffer *)pPacket->pPktContext;
++    A_ASSERT(busy != NULL);
++
++    if (pPacket->Status == A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        return;
++    }
++
++    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
++    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
++
++#ifdef CF
++   if (down_trylock(&ar->raw_htc_read_sem[streamID])) {
++#else
++    if (down_interruptible(&ar->raw_htc_read_sem[streamID])) {
++#endif /* CF */
++        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
++    }
++
++    A_ASSERT((pPacket->Status != A_OK) ||
++             (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN)));
++
++    busy->length = pPacket->ActualLength + HTC_HEADER_LEN;
++    busy->currPtr = HTC_HEADER_LEN;
++    ar->read_buffer_available[streamID] = TRUE;
++    //AR_DEBUG_PRINTF("raw read cb:  0x%X 0x%X \n", busy->currPtr,busy->length);
++    up(&ar->raw_htc_read_sem[streamID]);
++
++    /* Signal the waiting process */
++    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID);
++    wake_up_interruptible(&ar->raw_htc_read_queue[streamID]);
++}
++
++static void
++ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket)
++{
++    AR_SOFTC_T          *ar = (AR_SOFTC_T  *)Context;
++    raw_htc_buffer      *free;
++    HTC_RAW_STREAM_ID   streamID;
++
++    free = (raw_htc_buffer *)pPacket->pPktContext;
++    A_ASSERT(free != NULL);
++
++    if (pPacket->Status == A_ECANCELED) {
++        /*
++         * HTC provides A_ECANCELED status when it doesn't want to be refilled
++         * (probably due to a shutdown)
++         */
++        return;
++    }
++
++    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
++    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
++
++#ifdef CF
++    if (down_trylock(&ar->raw_htc_write_sem[streamID])) {
++#else
++    if (down_interruptible(&ar->raw_htc_write_sem[streamID])) {
++#endif
++        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
++    }
++
++    A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN));
++
++    free->length = 0;
++    ar->write_buffer_available[streamID] = TRUE;
++    up(&ar->raw_htc_write_sem[streamID]);
++
++    /* Signal the waiting process */
++    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID);
++    wake_up_interruptible(&ar->raw_htc_write_queue[streamID]);
++}
++
++/* connect to a service */
++static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T        *ar,
++                                           HTC_RAW_STREAM_ID StreamID)
++{
++    A_STATUS                 status;
++    HTC_SERVICE_CONNECT_RESP response;
++    A_UINT8                  streamNo;
++    HTC_SERVICE_CONNECT_REQ  connect;
++
++    do {
++
++        A_MEMZERO(&connect,sizeof(connect));
++            /* pass the stream ID as meta data to the RAW streams service */
++        streamNo = (A_UINT8)StreamID;
++        connect.pMetaData = &streamNo;
++        connect.MetaDataLength = sizeof(A_UINT8);
++            /* these fields are the same for all endpoints */
++        connect.EpCallbacks.pContext = ar;
++        connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb;
++        connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb;
++            /* simple interface, we don't need these optional callbacks */
++        connect.EpCallbacks.EpRecvRefill = NULL;
++        connect.EpCallbacks.EpSendFull = NULL;
++        connect.EpCallbacks.EpSendAvail = NULL;
++        connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM;
++
++            /* connect to the raw streams service, we may be able to get 1 or more
++             * connections, depending on WHAT is running on the target */
++        connect.ServiceID = HTC_RAW_STREAMS_SVC;
++
++        A_MEMZERO(&response,sizeof(response));
++
++            /* try to connect to the raw stream, it is okay if this fails with
++             * status HTC_SERVICE_NO_MORE_EP */
++        status = HTCConnectService(ar->arHtcTarget,
++                                   &connect,
++                                   &response);
++
++        if (A_FAILED(status)) {
++            if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) {
++                AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n");
++                status = A_OK;
++            }
++            break;
++        }
++
++            /* set endpoint mapping for the RAW HTC streams */
++        arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint);
++
++        AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n",
++                        StreamID, arRawStream2EndpointID(ar,StreamID));
++
++    } while (FALSE);
++
++    return status;
++}
++
++int ar6000_htc_raw_open(AR_SOFTC_T *ar)
++{
++    A_STATUS status;
++    int streamID, endPt, count2;
++    raw_htc_buffer *buffer;
++    HTC_SERVICE_ID servicepriority;
++
++    A_ASSERT(ar->arHtcTarget != NULL);
++
++        /* wait for target */
++    status = HTCWaitTarget(ar->arHtcTarget);
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status);
++        return -ENODEV;
++    }
++
++    for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) {
++        ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED;
++    }
++
++    for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) {
++        /* Initialize the data structures */
++        init_MUTEX(&ar->raw_htc_read_sem[streamID]);
++        init_MUTEX(&ar->raw_htc_write_sem[streamID]);
++        init_waitqueue_head(&ar->raw_htc_read_queue[streamID]);
++        init_waitqueue_head(&ar->raw_htc_write_queue[streamID]);
++
++            /* try to connect to the raw service */
++        status = ar6000_connect_raw_service(ar,streamID);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (arRawStream2EndpointID(ar,streamID) == 0) {
++            break;
++        }
++
++        for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) {
++            /* Initialize the receive buffers */
++            buffer = ar->raw_htc_write_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++            buffer = ar->raw_htc_read_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++
++            SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket,
++                                          buffer,
++                                          buffer->data,
++                                          AR6000_BUFFER_SIZE,
++                                          arRawStream2EndpointID(ar,streamID));
++
++            /* Queue buffers to HTC for receive */
++            if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK)
++            {
++                BMIInit();
++                return -EIO;
++            }
++        }
++
++        for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) {
++            /* Initialize the receive buffers */
++            buffer = ar->raw_htc_write_buffer[streamID][count2];
++            memset(buffer, 0, sizeof(raw_htc_buffer));
++        }
++
++        ar->read_buffer_available[streamID] = FALSE;
++        ar->write_buffer_available[streamID] = TRUE;
++    }
++
++    if (A_FAILED(status)) {
++        return -EIO;
++    }
++
++    AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID);
++
++    servicepriority = HTC_RAW_STREAMS_SVC;  /* only 1 */
++
++        /* set callbacks and priority list */
++    HTCSetCreditDistribution(ar->arHtcTarget,
++                             ar,
++                             NULL,  /* use default */
++                             NULL,  /* use default */
++                             &servicepriority,
++                             1);
++
++    /* Start the HTC component */
++    if ((status = HTCStart(ar->arHtcTarget)) != A_OK) {
++        BMIInit();
++        return -EIO;
++    }
++
++    (ar)->arRawIfInit = TRUE;
++
++    return 0;
++}
++
++int ar6000_htc_raw_close(AR_SOFTC_T *ar)
++{
++    A_PRINTF("ar6000_htc_raw_close called \n");
++    HTCStop(ar->arHtcTarget);
++
++        /* reset the device */
++    ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
++    /* Initialize the BMI component */
++    BMIInit();
++
++    return 0;
++}
++
++raw_htc_buffer *
++get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID)
++{
++    int count;
++    raw_htc_buffer *busy;
++
++    /* Check for data */
++    for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) {
++        busy = ar->raw_htc_read_buffer[StreamID][count];
++        if (busy->length) {
++            break;
++        }
++    }
++    if (busy->length) {
++        ar->read_buffer_available[StreamID] = TRUE;
++    } else {
++        ar->read_buffer_available[StreamID] = FALSE;
++    }
++
++    return busy;
++}
++
++ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
++                            char __user *buffer, size_t length)
++{
++    int readPtr;
++    raw_htc_buffer *busy;
++
++    if (arRawStream2EndpointID(ar,StreamID) == 0) {
++        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
++        return -EFAULT;
++    }
++
++    if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
++        return -ERESTARTSYS;
++    }
++
++    busy = get_filled_buffer(ar,StreamID);
++    while (!ar->read_buffer_available[StreamID]) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++
++        /* Wait for the data */
++        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID);
++        if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID],
++                                     ar->read_buffer_available[StreamID]))
++        {
++            return -EINTR;
++        }
++        if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
++            return -ERESTARTSYS;
++        }
++        busy = get_filled_buffer(ar,StreamID);
++    }
++
++    /* Read the data */
++    readPtr = busy->currPtr;
++    if (length > busy->length - HTC_HEADER_LEN) {
++        length = busy->length - HTC_HEADER_LEN;
++    }
++    if (copy_to_user(buffer, &busy->data[readPtr], length)) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++        return -EFAULT;
++    }
++
++    busy->currPtr += length;
++
++    //AR_DEBUG_PRINTF("raw read ioctl:  currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length);
++
++    if (busy->currPtr == busy->length)
++    {
++        busy->currPtr = 0;
++        busy->length = 0;
++        HTC_PACKET_RESET_RX(&busy->HTCPacket);
++        //AR_DEBUG_PRINTF("raw read ioctl:  ep for packet:%d \n", busy->HTCPacket.Endpoint);
++        HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket);
++    }
++    ar->read_buffer_available[StreamID] = FALSE;
++    up(&ar->raw_htc_read_sem[StreamID]);
++
++    return length;
++}
++
++static raw_htc_buffer *
++get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID)
++{
++    int count;
++    raw_htc_buffer *free;
++
++    free = NULL;
++    for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) {
++        free = ar->raw_htc_write_buffer[StreamID][count];
++        if (free->length == 0) {
++            break;
++        }
++    }
++    if (!free->length) {
++        ar->write_buffer_available[StreamID] = TRUE;
++    } else {
++        ar->write_buffer_available[StreamID] = FALSE;
++    }
++
++    return free;
++}
++
++ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
++                     char __user *buffer, size_t length)
++{
++    int writePtr;
++    raw_htc_buffer *free;
++
++    if (arRawStream2EndpointID(ar,StreamID) == 0) {
++        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
++        return -EFAULT;
++    }
++
++    if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
++        return -ERESTARTSYS;
++    }
++
++    /* Search for a free buffer */
++    free = get_free_buffer(ar,StreamID);
++
++    /* Check if there is space to write else wait */
++    while (!ar->write_buffer_available[StreamID]) {
++        up(&ar->raw_htc_write_sem[StreamID]);
++
++        /* Wait for buffer to become free */
++        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID);
++        if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID],
++                                     ar->write_buffer_available[StreamID]))
++        {
++            return -EINTR;
++        }
++        if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
++            return -ERESTARTSYS;
++        }
++        free = get_free_buffer(ar,StreamID);
++    }
++
++    /* Send the data */
++    writePtr = HTC_HEADER_LEN;
++    if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) {
++        length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN;
++    }
++
++    if (copy_from_user(&free->data[writePtr], buffer, length)) {
++        up(&ar->raw_htc_read_sem[StreamID]);
++        return -EFAULT;
++    }
++
++    free->length = length;
++
++    SET_HTC_PACKET_INFO_TX(&free->HTCPacket,
++                           free,
++                           &free->data[writePtr],
++                           length,
++                           arRawStream2EndpointID(ar,StreamID),
++                           AR6K_DATA_PKT_TAG);
++
++    HTCSendPkt(ar->arHtcTarget,&free->HTCPacket);
++
++    ar->write_buffer_available[StreamID] = FALSE;
++    up(&ar->raw_htc_write_sem[StreamID]);
++
++    return length;
++}
++#endif /* HTC_RAW_INTERFACE */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6xapi_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6xapi_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ar6xapi_linux.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ar6xapi_linux.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,128 @@
++#ifndef _AR6XAPI_LINUX_H
++#define _AR6XAPI_LINUX_H
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct ar6_softc;
++
++void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap);
++A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt);
++A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID);
++void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel,
++                          A_UINT8 *bssid, A_UINT16 listenInterval,
++                          A_UINT16 beaconInterval, NETWORK_TYPE networkType,
++                          A_UINT8 beaconIeLen, A_UINT8 assocReqLen,
++                          A_UINT8 assocRespLen,A_UINT8 *assocInfo);
++void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason,
++                             A_UINT8 *bssid, A_UINT8 assocRespLen,
++                             A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus);
++void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid,
++                              A_BOOL ismcast);
++void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps);
++void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList);
++void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode);
++void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr);
++void ar6000_keepalive_rx(void *devt, A_UINT8 configured);
++void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps,
++                                 WMI_NEIGHBOR_INFO *info);
++void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num);
++void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status);
++void ar6000_targetStats_event(struct ar6_softc *ar,  WMI_TARGET_STATS *pStats);
++void ar6000_rssiThreshold_event(struct ar6_softc *ar,
++                                WMI_RSSI_THRESHOLD_VAL newThreshold,
++                                A_INT16 rssi);
++void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal);
++void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication,
++                                A_UINT8 statusCode, A_UINT8 *tspecSuggestion);
++void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source);
++void
++ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl);
++
++void
++ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p);
++
++void
++ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters,
++                      WMI_GET_WOW_LIST_REPLY *wow_reply);
++
++void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID,
++                             WMI_PMKID *pmkidList);
++
++void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
++void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
++void ar6000_gpio_ack_rx(void);
++
++void ar6000_dbglog_init_done(struct ar6_softc *ar);
++
++#ifdef SEND_EVENT_TO_APP
++void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len);
++#endif
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len);
++#endif
++
++void ar6000_tx_retry_err_event(void *devt);
++
++void ar6000_snrThresholdEvent_rx(void *devt,
++                                 WMI_SNR_THRESHOLD_VAL newThreshold,
++                                 A_UINT8 snr);
++
++void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal);
++
++
++void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask);
++
++A_STATUS ar6000_get_driver_cfg(struct net_device *dev,
++                                A_UINT16 cfgParam,
++                                void *result);
++void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len);
++
++void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped,
++                         A_INT8 *buffer, A_UINT32 length);
++
++int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar);
++
++void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active);
++
++void ar6000_dset_open_req(void *devt,
++                          A_UINT32 id,
++                          A_UINT32 targ_handle,
++                          A_UINT32 targ_reply_fn,
++                          A_UINT32 targ_reply_arg);
++void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
++void ar6000_dset_data_req(void *devt,
++                          A_UINT32 access_cookie,
++                          A_UINT32 offset,
++                          A_UINT32 length,
++                          A_UINT32 targ_buf,
++                          A_UINT32 targ_reply_fn,
++                          A_UINT32 targ_reply_arg);
++
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/athdrv_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/athdrv_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/athdrv_linux.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/athdrv_linux.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,993 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHDRV_LINUX_H
++#define _ATHDRV_LINUX_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++
++/*
++ * There are two types of ioctl's here: Standard ioctls and
++ * eXtended ioctls.  All extended ioctls (XIOCTL) are multiplexed
++ * off of the single ioctl command, AR6000_IOCTL_EXTENDED.  The
++ * arguments for every XIOCTL starts with a 32-bit command word
++ * that is used to select which extended ioctl is in use.  After
++ * the command word are command-specific arguments.
++ */
++
++/* Linux standard Wireless Extensions, private ioctl interfaces */
++#define IEEE80211_IOCTL_SETPARAM             (SIOCIWFIRSTPRIV+0)
++#define IEEE80211_IOCTL_GETPARAM             (SIOCIWFIRSTPRIV+1)
++#define IEEE80211_IOCTL_SETKEY               (SIOCIWFIRSTPRIV+2)
++#define IEEE80211_IOCTL_SETWMMPARAMS         (SIOCIWFIRSTPRIV+3)
++#define IEEE80211_IOCTL_DELKEY               (SIOCIWFIRSTPRIV+4)
++#define IEEE80211_IOCTL_GETWMMPARAMS         (SIOCIWFIRSTPRIV+5)
++#define IEEE80211_IOCTL_SETOPTIE             (SIOCIWFIRSTPRIV+6)
++#define IEEE80211_IOCTL_SETMLME              (SIOCIWFIRSTPRIV+7)
++//#define IEEE80211_IOCTL_GETOPTIE             (SIOCIWFIRSTPRIV+7)
++#define IEEE80211_IOCTL_ADDPMKID             (SIOCIWFIRSTPRIV+8)
++//#define IEEE80211_IOCTL_SETAUTHALG           (SIOCIWFIRSTPRIV+10)
++#define IEEE80211_IOCTL_LASTONE              (SIOCIWFIRSTPRIV+9)
++
++
++
++/*                      ====WMI Ioctls====                                    */
++/*
++ *
++ * Many ioctls simply provide WMI services to application code:
++ * an application makes such an ioctl call with a set of arguments
++ * that are packaged into the corresponding WMI message, and sent
++ * to the Target.
++ */
++
++#define AR6000_IOCTL_WMI_GETREV              (SIOCIWFIRSTPRIV+10)
++/*
++ * arguments:
++ *   ar6000_version *revision
++ */
++
++#define AR6000_IOCTL_WMI_SETPWR              (SIOCIWFIRSTPRIV+11)
++/*
++ * arguments:
++ *   WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
++ * uses: WMI_SET_POWER_MODE_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETSCAN             (SIOCIWFIRSTPRIV+12)
++/*
++ * arguments:
++ *   WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
++ * uses: WMI_SET_SCAN_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETLISTENINT        (SIOCIWFIRSTPRIV+13)
++/*
++ * arguments:
++ *   UINT32 listenInterval
++ * uses: WMI_SET_LISTEN_INT_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SETBSSFILTER        (SIOCIWFIRSTPRIV+14)
++/*
++ * arguments:
++ *   WMI_BSS_FILTER filter (see include/wmi.h)
++ * uses: WMI_SET_BSS_FILTER_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS   (SIOCIWFIRSTPRIV+16)
++/*
++ * arguments:
++ *   WMI_CHANNEL_PARAMS_CMD chParams
++ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_PROBEDSSID      (SIOCIWFIRSTPRIV+17)
++/*
++ * arguments:
++ *   WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
++ * uses: WMI_SETPROBED_SSID_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_PMPARAMS        (SIOCIWFIRSTPRIV+18)
++/*
++ * arguments:
++ *   WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
++ * uses: WMI_SET_POWER_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_BADAP           (SIOCIWFIRSTPRIV+19)
++/*
++ * arguments:
++ *   WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
++ * uses: WMI_ADD_BAD_AP_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_GET_QOS_QUEUE       (SIOCIWFIRSTPRIV+20)
++/*
++ * arguments:
++ *   ar6000_queuereq queueRequest (see below)
++ */
++
++#define AR6000_IOCTL_WMI_CREATE_QOS          (SIOCIWFIRSTPRIV+21)
++/*
++ * arguments:
++ *   WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
++ * uses: WMI_CREATE_PSTREAM_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_DELETE_QOS          (SIOCIWFIRSTPRIV+22)
++/*
++ * arguments:
++ *   WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
++ * uses: WMI_DELETE_PSTREAM_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD   (SIOCIWFIRSTPRIV+23)
++/*
++ * arguments:
++ *   WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
++/*
++ * arguments:
++ *   WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
++ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_GET_TARGET_STATS    (SIOCIWFIRSTPRIV+25)
++/*
++ * arguments:
++ *   TARGET_STATS *targetStats (see below)
++ * uses: WMI_GET_STATISTICS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ASSOC_INFO      (SIOCIWFIRSTPRIV+26)
++/*
++ * arguments:
++ *   WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
++ * uses: WMI_SET_ASSOC_INFO_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS   (SIOCIWFIRSTPRIV+27)
++/*
++ * arguments:
++ *   WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
++ * uses: WMI_SET_ACCESS_PARAMS_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_BMISS_TIME      (SIOCIWFIRSTPRIV+28)
++/*
++ * arguments:
++ *   UINT32 beaconMissTime
++ * uses: WMI_SET_BMISS_TIME_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT    (SIOCIWFIRSTPRIV+29)
++/*
++ * arguments:
++ *   WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
++ * uses: WMI_SET_DISC_TIMEOUT_CMDID
++ */
++
++#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS    (SIOCIWFIRSTPRIV+30)
++/*
++ * arguments:
++ *   WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
++ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
++ */
++
++/*
++ * There is a very small space available for driver-private
++ * wireless ioctls.  In order to circumvent this limitation,
++ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
++ * single AR6000_IOCTL_EXTENDED ioctl.
++ */
++#define AR6000_IOCTL_EXTENDED                (SIOCIWFIRSTPRIV+31)
++
++
++/*                         ====BMI Extended Ioctls====                        */
++
++#define AR6000_XIOCTL_BMI_DONE                                  1
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
++ * uses: BMI_DONE
++ */
++
++#define AR6000_XIOCTL_BMI_READ_MEMORY                           2
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
++ *       UINT32 address
++ *       UINT32 length
++ *     }
++ *     char results[length]
++ *   }
++ * uses: BMI_READ_MEMORY
++ */
++
++#define AR6000_XIOCTL_BMI_WRITE_MEMORY                          3
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
++ *   UINT32 address
++ *   UINT32 length
++ *   char data[length]
++ * uses: BMI_WRITE_MEMORY
++ */
++
++#define AR6000_XIOCTL_BMI_EXECUTE                               4
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
++ *   UINT32 TargetAddress
++ *   UINT32 parameter
++ * uses: BMI_EXECUTE
++ */
++
++#define AR6000_XIOCTL_BMI_SET_APP_START                         5
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
++ *   UINT32 TargetAddress
++ * uses: BMI_SET_APP_START
++ */
++
++#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER                     6
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
++ *       UINT32 TargetAddress, 32-bit aligned
++ *     }
++ *     UINT32 result
++ *   }
++ * uses: BMI_READ_SOC_REGISTER
++ */
++
++#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER                    7
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
++ *       UINT32 TargetAddress, 32-bit aligned
++ *       UINT32 newValue
++ *     }
++ * uses: BMI_WRITE_SOC_REGISTER
++ */
++
++#define AR6000_XIOCTL_BMI_TEST                                  8
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
++ *   UINT32 address
++ *   UINT32 length
++ *   UINT32 count
++ */
++
++
++
++/* Historical Host-side DataSet support */
++#define AR6000_XIOCTL_UNUSED9                                   9
++#define AR6000_XIOCTL_UNUSED10                                  10
++#define AR6000_XIOCTL_UNUSED11                                  11
++
++/*                      ====Misc Extended Ioctls====                          */
++
++#define AR6000_XIOCTL_FORCE_TARGET_RESET                        12
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
++ */
++
++
++#ifdef HTC_RAW_INTERFACE
++/* HTC Raw Interface Ioctls */
++#define AR6000_XIOCTL_HTC_RAW_OPEN                              13
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_CLOSE                             14
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_READ                              15
++/*
++ * arguments:
++ *   union {
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
++ *       UINT32 mailboxID
++ *       UINT32 length
++ *     }
++ *     results[length]
++ *   }
++ */
++
++#define AR6000_XIOCTL_HTC_RAW_WRITE                             16
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
++ *   UINT32 mailboxID
++ *   UINT32 length
++ *   char buffer[length]
++ */
++#endif /* HTC_RAW_INTERFACE */
++
++#define AR6000_XIOCTL_CHECK_TARGET_READY                        17
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
++ */
++
++
++
++/*                ====GPIO (General Purpose I/O) Extended Ioctls====          */
++
++#define AR6000_XIOCTL_GPIO_OUTPUT_SET                           18
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
++ *   ar6000_gpio_output_set_cmd_s (see below)
++ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INPUT_GET                            19
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
++ * uses: WMIX_GPIO_INPUT_GET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_REGISTER_SET                         20
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
++ *   ar6000_gpio_register_cmd_s (see below)
++ * uses: WMIX_GPIO_REGISTER_SET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_REGISTER_GET                         21
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
++ *   ar6000_gpio_register_cmd_s (see below)
++ * uses: WMIX_GPIO_REGISTER_GET_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INTR_ACK                             22
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
++ *   ar6000_cpio_intr_ack_cmd_s (see below)
++ * uses: WMIX_GPIO_INTR_ACK_CMDID
++ */
++
++#define AR6000_XIOCTL_GPIO_INTR_WAIT                            23
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
++ */
++
++
++
++/*                    ====more wireless commands====                          */
++
++#define AR6000_XIOCTL_SET_ADHOC_BSSID                           24
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
++ *   WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
++ */
++
++#define AR6000_XIOCTL_SET_OPT_MODE                              25
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
++ *   WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
++ * uses: WMI_SET_OPT_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_OPT_SEND_FRAME                            26
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
++ *   WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
++ * uses: WMI_OPT_TX_FRAME_CMDID
++ */
++
++#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL                   27
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
++ *   WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
++ * uses: WMI_SET_BEACON_INT_CMDID
++ */
++
++
++#define IEEE80211_IOCTL_SETAUTHALG                              28
++
++
++#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE                        29
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
++ *   WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
++ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
++ */
++
++
++#define AR6000_XIOCTL_SET_MAX_SP                                30
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
++ *   WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
++ * uses: WMI_SET_MAX_SP_LEN_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_GET_ROAM_TBL                          31
++
++#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL                         32
++
++#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS                 33
++
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
++ *   WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
++ *   WMI_SET_POWERSAVE_TIMERS_CMDID
++ */
++
++#define AR6000_XIOCTRL_WMI_GET_POWER_MODE                        34
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
++ */
++
++#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE                       35
++typedef enum {
++    WLAN_DISABLED,
++    WLAN_ENABLED
++} AR6000_WLAN_STATE;
++/*
++ * arguments:
++ * enable/disable
++ */
++
++#define AR6000_XIOCTL_WMI_GET_ROAM_DATA                         36
++
++#define AR6000_XIOCTL_WMI_SETRETRYLIMITS                37
++/*
++ * arguments:
++ *   WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
++ * uses: WMI_SET_RETRY_LIMITS_CMDID
++ */
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/*       ====extended commands for radio test ====                          */
++
++#define AR6000_XIOCTL_TCMD_CONT_TX                      38
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
++ *   WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
++ * uses: WMI_TCMD_CONT_TX_CMDID
++ */
++
++#define AR6000_XIOCTL_TCMD_CONT_RX                      39
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
++ *   WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
++ * uses: WMI_TCMD_CONT_RX_CMDID
++ */
++
++#define AR6000_XIOCTL_TCMD_PM                           40
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
++ *   WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
++ * uses: WMI_TCMD_PM_CMDID
++ */
++
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++#define AR6000_XIOCTL_WMI_STARTSCAN                     41
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
++ *   UINT8  scanType
++ *   UINT8  scanConnected
++ *   A_BOOL forceFgScan
++ * uses: WMI_START_SCAN_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SETFIXRATES                   42
++
++#define AR6000_XIOCTL_WMI_GETFIXRATES                   43
++
++
++#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD             44
++/*
++ * arguments:
++ *   WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_CLR_RSSISNR                   45
++/*
++ * arguments:
++ *   WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_CLR_RSSISNR_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD               46
++/*
++ * arguments:
++ *   WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
++ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_RTS                        47
++/*
++ * arguments:
++ *   WMI_SET_RTS_MODE_CMD (see include/wmi.h)
++ * uses: WMI_SET_RTS_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_LPREAMBLE                 48
++
++#define AR6000_XIOCTL_WMI_SET_AUTHMODE                  49
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
++ *   UINT8  mode
++ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_SET_REASSOCMODE               50
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
++ *   UINT8  mode
++ * uses: WMI_SET_WMM_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_WMM                       51
++
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
++ * UINT32 frequency
++ * UINT8  threshold
++ */
++#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS  52
++
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
++ * UINT32 cookie
++ */
++#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP         53
++
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
++ *   UINT32 regDomain
++ */
++#define AR6000_XIOCTL_WMI_GET_RD                        54
++
++#define AR6000_XIOCTL_DIAG_READ                         55
++
++#define AR6000_XIOCTL_DIAG_WRITE                        56
++
++/*
++ * arguments cmd (AR6000_XIOCTL_SET_TXOP)
++ * WMI_TXOP_CFG  txopEnable
++ */
++#define AR6000_XIOCTL_WMI_SET_TXOP                      57
++
++#ifdef USER_KEYS
++/*
++ * arguments:
++ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
++ * UINT32 keyOpCtrl
++ * uses AR6000_USER_SETKEYS_INFO
++ */
++#define AR6000_XIOCTL_USER_SETKEYS                      58
++#endif /* USER_KEYS */
++
++#define AR6000_XIOCTL_WMI_SET_KEEPALIVE                 59
++/*
++ * arguments:
++ *   UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
++ *   UINT8 keepaliveInterval
++ * uses: WMI_SET_KEEPALIVE_CMDID
++ */
++
++#define AR6000_XIOCTL_WMI_GET_KEEPALIVE                 60
++/*
++ * arguments:
++ *   UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
++ *   UINT8 keepaliveInterval
++ *   A_BOOL configured
++ * uses: WMI_GET_KEEPALIVE_CMDID
++ */
++
++/*               ====ROM Patching Extended Ioctls====                       */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL              61
++/*
++ * arguments:
++ *     union {
++ *       struct {
++ *         UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
++ *         UINT32 ROM Address
++ *         UINT32 RAM Address
++ *         UINT32 number of bytes
++ *         UINT32 activate? (0 or 1)
++ *       }
++ *       A_UINT32 resulting rompatch ID
++ *     }
++ * uses: BMI_ROMPATCH_INSTALL
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL            62
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
++ *       UINT32 rompatch ID
++ *     }
++ * uses: BMI_ROMPATCH_UNINSTALL
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE             63
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
++ *       UINT32 rompatch count
++ *       UINT32 rompatch IDs[rompatch count]
++ *     }
++ * uses: BMI_ROMPATCH_ACTIVATE
++ */
++
++#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE           64
++/*
++ * arguments:
++ *     struct {
++ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
++ *       UINT32 rompatch count
++ *       UINT32 rompatch IDs[rompatch count]
++ *     }
++ * uses: BMI_ROMPATCH_DEACTIVATE
++ */
++
++#define AR6000_XIOCTL_WMI_SET_APPIE             65
++/*
++ * arguments:
++ *      struct {
++ *          UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
++ *          UINT32  app_frmtype;
++ *          UINT32  app_buflen;
++ *          UINT8   app_buf[];
++ *      }
++ */
++#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER    66
++/*
++ * arguments:
++ *      A_UINT32 filter_type;
++ */
++
++#define AR6000_XIOCTL_DBGLOG_CFG_MODULE             67
++
++#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS         68
++
++#define AR6000_XIOCTL_WMI_SET_WSC_STATUS              70
++/*
++ * arguments:
++ *      A_UINT32 wsc_status;
++ *            (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
++ */
++
++/*
++ * arguments:
++ *      struct {
++ *          A_UINT8 streamType;
++ *          A_UINT8 status;
++ *      }
++ * uses: WMI_SET_BT_STATUS_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_BT_STATUS             71
++
++/*
++ * arguments:
++ *      struct {
++ *           A_UINT8 paramType;
++ *           union {
++ *               A_UINT8 noSCOPkts;
++ *               BT_PARAMS_A2DP a2dpParams;
++ *               BT_COEX_REGS regs;
++ *           };
++ *      }
++ * uses: WMI_SET_BT_PARAM_CMDID
++ */
++#define AR6000_XIOCTL_WMI_SET_BT_PARAMS             72
++
++#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE       73
++#define AR6000_XIOCTL_WMI_SET_WOW_MODE              74
++#define AR6000_XIOCTL_WMI_GET_WOW_LIST              75
++#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN           76
++#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN           77
++
++
++
++#define AR6000_XIOCTL_TARGET_INFO                   78
++/*
++ * arguments:
++ *   UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
++ *   A_UINT32 TargetVersion (returned)
++ *   A_UINT32 TargetType    (returned)
++ * (See also bmi_msg.h target_ver and target_type)
++ */
++
++#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE         79
++/*
++ * arguments:
++ *      none
++ */
++
++#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE       80
++/*
++ * This ioctl is used to emulate traffic activity
++ * timeouts.  Activity/inactivity will trigger the driver
++ * to re-balance credits.
++ *
++ * arguments:
++ *      ar6000_traffic_activity_change
++ */
++
++#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS    81
++/*
++ * This ioctl is used to set the connect control flags
++ *
++ * arguments:
++ *      A_UINT32 connectCtrlFlags
++ */
++
++#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS              82
++/*
++ * This IOCTL sets any Authentication,Key Management and Protection
++ * related parameters. This is used along with the information set in
++ * Connect Command.
++ * Currently this enables Multiple PMKIDs to an AP.
++ *
++ * arguments:
++ *      struct {
++ *          A_UINT32    akmpInfo;
++ *      }
++ * uses: WMI_SET_AKMP_PARAMS_CMD
++ */
++
++#define AR6000_XIOCTL_WMI_GET_PMKID_LIST            83
++
++#define AR6000_XIOCTL_WMI_SET_PMKID_LIST            84
++/*
++ * This IOCTL is used to set a list of PMKIDs. This list of
++ * PMKIDs is used in the [Re]AssocReq Frame. This list is used
++ * only if the MultiPMKID option is enabled via the
++ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS  IOCTL.
++ *
++ * arguments:
++ *      struct {
++ *          A_UINT32    numPMKID;
++ *          WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
++ *      }
++ * uses: WMI_SET_PMKIDLIST_CMD
++ */
++
++/* Historical DSETPATCH support for INI patches */
++#define AR6000_XIOCTL_UNUSED90                      90
++
++
++
++/* used by AR6000_IOCTL_WMI_GETREV */
++struct ar6000_version {
++    A_UINT32        host_ver;
++    A_UINT32        target_ver;
++};
++
++/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
++struct ar6000_queuereq {
++    A_UINT8         trafficClass;
++    A_UINT16        activeTsids;
++};
++
++/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
++typedef struct targetStats_t {
++    A_UINT64    tx_packets;
++    A_UINT64    tx_bytes;
++    A_UINT64    tx_unicast_pkts;
++    A_UINT64    tx_unicast_bytes;
++    A_UINT64    tx_multicast_pkts;
++    A_UINT64    tx_multicast_bytes;
++    A_UINT64    tx_broadcast_pkts;
++    A_UINT64    tx_broadcast_bytes;
++    A_UINT64    tx_rts_success_cnt;
++    A_UINT64    tx_packet_per_ac[4];
++
++    A_UINT64    tx_errors;
++    A_UINT64    tx_failed_cnt;
++    A_UINT64    tx_retry_cnt;
++    A_UINT64    tx_rts_fail_cnt;
++    A_INT32     tx_unicast_rate;
++    A_UINT64    rx_packets;
++    A_UINT64    rx_bytes;
++    A_UINT64    rx_unicast_pkts;
++    A_UINT64    rx_unicast_bytes;
++    A_UINT64    rx_multicast_pkts;
++    A_UINT64    rx_multicast_bytes;
++    A_UINT64    rx_broadcast_pkts;
++    A_UINT64    rx_broadcast_bytes;
++    A_UINT64    rx_fragment_pkt;
++
++    A_UINT64    rx_errors;
++    A_UINT64    rx_crcerr;
++    A_UINT64    rx_key_cache_miss;
++    A_UINT64    rx_decrypt_err;
++    A_UINT64    rx_duplicate_frames;
++    A_INT32     rx_unicast_rate;
++
++    A_UINT64    tkip_local_mic_failure;
++    A_UINT64    tkip_counter_measures_invoked;
++    A_UINT64    tkip_replays;
++    A_UINT64    tkip_format_errors;
++    A_UINT64    ccmp_format_errors;
++    A_UINT64    ccmp_replays;
++
++    A_UINT64    power_save_failure_cnt;
++    A_INT16     noise_floor_calibation;
++
++    A_UINT64    cs_bmiss_cnt;
++    A_UINT64    cs_lowRssi_cnt;
++    A_UINT64    cs_connect_cnt;
++    A_UINT64    cs_disconnect_cnt;
++    A_UINT8     cs_aveBeacon_snr;
++    A_INT16     cs_aveBeacon_rssi;
++    A_UINT8     cs_lastRoam_msec;
++    A_UINT8     cs_snr;
++    A_INT16     cs_rssi;
++
++    A_UINT32    lq_val;
++
++    A_UINT32    wow_num_pkts_dropped;
++    A_UINT8     wow_num_host_pkt_wakeups;
++    A_UINT8     wow_num_host_event_wakeups;
++    A_UINT16    wow_num_events_discarded;
++
++}TARGET_STATS;
++
++typedef struct targetStats_cmd_t {
++    TARGET_STATS targetStats;
++    int clearStats;
++} TARGET_STATS_CMD;
++
++/* used by AR6000_XIOCTL_USER_SETKEYS */
++
++/*
++ * Setting this bit to 1 doesnot initialize the RSC on the firmware
++ */
++#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL    1
++#define AR6000_USER_SETKEYS_RSC_UNCHANGED     0x00000002
++
++typedef struct {
++    A_UINT32  keyOpCtrl;  /* Bit Map of Key Mgmt Ctrl Flags */
++} AR6000_USER_SETKEYS_INFO;
++
++
++/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
++struct ar6000_gpio_output_set_cmd_s {
++    A_UINT32 set_mask;
++    A_UINT32 clear_mask;
++    A_UINT32 enable_mask;
++    A_UINT32 disable_mask;
++};
++
++/*
++ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
++ */
++struct ar6000_gpio_register_cmd_s {
++    A_UINT32 gpioreg_id;
++    A_UINT32 value;
++};
++
++/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
++struct ar6000_gpio_intr_ack_cmd_s {
++    A_UINT32 ack_mask;
++};
++
++/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
++struct ar6000_gpio_intr_wait_cmd_s {
++    A_UINT32 intr_mask;
++    A_UINT32 input_values;
++};
++
++/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
++typedef struct ar6000_dbglog_module_config_s {
++    A_UINT32 valid;
++    A_UINT16 mmask;
++    A_UINT16 tsr;
++    A_BOOL   rep;
++    A_UINT16 size;
++} DBGLOG_MODULE_CONFIG;
++
++typedef struct user_rssi_thold_t {
++    A_INT16     tag;
++    A_INT16     rssi;
++} USER_RSSI_THOLD;
++
++typedef struct user_rssi_params_t {
++    A_UINT8            weight;
++    A_UINT32           pollTime;
++    USER_RSSI_THOLD    tholds[12];
++} USER_RSSI_PARAMS;
++
++/*
++ * Host driver may have some config parameters. Typically, these
++ * config params are one time config parameters. These could
++ * correspond to any of the underlying modules. Host driver exposes
++ * an api for the underlying modules to get this config.
++ */
++#define AR6000_DRIVER_CFG_BASE                  0x8000
++
++/* Should driver perform wlan node caching? */
++#define AR6000_DRIVER_CFG_GET_WLANNODECACHING   0x8001
++/*Should we log raw WMI msgs */
++#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS      0x8002
++
++/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
++struct ar6000_diag_window_cmd_s {
++    unsigned int addr;
++    unsigned int value;
++};
++
++
++struct ar6000_traffic_activity_change {
++    A_UINT32    StreamID;   /* stream ID to indicate activity change */
++    A_UINT32    Active;     /* active (1) or inactive (0) */
++};
++
++#ifdef __cplusplus
++}
++#endif
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/athtypes_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/athtypes_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/athtypes_linux.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/athtypes_linux.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,47 @@
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHTYPES_LINUX_H_
++#define _ATHTYPES_LINUX_H_
++
++#ifdef __KERNEL__
++#include <linux/types.h>
++#endif
++
++typedef int8_t      A_INT8;
++typedef int16_t     A_INT16;
++typedef int32_t     A_INT32;
++typedef int64_t     A_INT64;
++
++typedef u_int8_t     A_UINT8;
++typedef u_int16_t    A_UINT16;
++typedef u_int32_t    A_UINT32;
++typedef u_int64_t    A_UINT64;
++
++typedef int             A_BOOL;
++typedef char            A_CHAR;
++typedef unsigned char   A_UCHAR;
++typedef unsigned long   A_ATH_TIMER;
++
++
++#endif /* _ATHTYPES_LINUX_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/config_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/config_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/config_linux.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/config_linux.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,44 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _CONFIG_LINUX_H_
++#define _CONFIG_LINUX_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Host-side GPIO support is optional.
++ * If run-time access to GPIO pins is not required, then
++ * this should be changed to #undef.
++ */
++#define CONFIG_HOST_GPIO_SUPPORT
++
++/*
++ * Host side Test Command support
++ */
++#define CONFIG_HOST_TCMD_SUPPORT
++
++#define USE_4BYTE_REGISTER_ACCESS
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/debug_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/debug_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/debug_linux.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/debug_linux.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,86 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _DEBUG_LINUX_H_
++#define _DEBUG_LINUX_H_
++
++#define DBG_DEFAULTS  (DBG_ERROR|DBG_WARNING)
++
++extern A_UINT32 g_dbg_flags;
++
++#define DBGFMT  "%s() : "
++#define DBGARG  __func__
++#define DBGFN A_PRINTF
++
++/* ------- Debug related stuff ------- */
++enum {
++    ATH_DEBUG_SEND = 0x0001,
++    ATH_DEBUG_RECV = 0x0002,
++    ATH_DEBUG_SYNC = 0x0004,
++    ATH_DEBUG_DUMP = 0x0008,
++    ATH_DEBUG_IRQ  = 0x0010,
++    ATH_DEBUG_TRC  = 0x0020,
++    ATH_DEBUG_WARN = 0x0040,
++    ATH_DEBUG_ERR  = 0x0080,
++    ATH_LOG_INF          = 0x0100,
++    ATH_DEBUG_BMI  = 0x0110,
++    ATH_DEBUG_WMI  = 0x0120,
++    ATH_DEBUG_HIF  = 0x0140,
++    ATH_DEBUG_HTC  = 0x0180,
++    ATH_DEBUG_WLAN = 0x1000,
++    ATH_LOG_ERR          = 0x1010,
++    ATH_DEBUG_ANY  = 0xFFFF,
++};
++
++#ifdef DEBUG
++
++#define A_DPRINTF(f, a) \
++      if(g_dbg_flags & (f)) \
++      {       \
++              DBGFN a ; \
++      }
++
++
++// TODO FIX usage of A_PRINTF!
++#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
++#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
++    if (debughtc & ATH_DEBUG_DUMP) {             \
++        DebugDumpBytes(buffer, length,desc);               \
++    }                                            \
++} while(0)
++#define PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(flags, args) do {        \
++    if (debughtc & (flags)) {                    \
++        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
++    }                                            \
++} while (0)
++#define AR_DEBUG_ASSERT(test) do {               \
++    if (!(test)) {                               \
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
++    }                                            \
++} while(0)
++extern int debughtc;
++#else
++#define AR_DEBUG_PRINTF(flags, args)
++#define AR_DEBUG_PRINTBUF(buffer, length, desc)
++#define AR_DEBUG_ASSERT(test)
++#define AR_DEBUG_LVL_CHECK(lvl) 0
++#define A_DPRINTF(f, a)
++#endif
++
++#endif /* _DEBUG_LINUX_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ioctl.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ioctl.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/ioctl.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/ioctl.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,2540 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++extern USER_RSSI_THOLD rssi_map[12];
++extern unsigned int wmitimeout;
++extern A_WAITQUEUE_HEAD arEvent;
++extern int tspecCompliance;
++extern int bmienable;
++extern int bypasswmi;
++
++static int
++ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    /* currently assume only roam times are required */
++    if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) {
++        return -EIO;
++    }
++
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_ROAM_CTRL_CMD cmd;
++    A_UINT8 size = sizeof(cmd);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) {
++        if (cmd.info.bssBiasInfo.numBss > 1) {
++            size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS);
++        }
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_POWERSAVE_TIMERS_POLICY_CMD cmd;
++    A_UINT8 size = sizeof(cmd);
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if (copy_from_user(&cmd, userdata, size)) {
++        return -EFAULT;
++    }
++
++    if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_WMM_CMD cmd;
++    A_STATUS ret;
++
++    if ((dev->flags & IFF_UP) != IFF_UP) {
++        return -EIO;
++    }
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
++                                sizeof(cmd)))
++    {
++        return -EFAULT;
++    }
++
++    if (cmd.status == WMI_WMM_ENABLED) {
++        ar->arWmmEnabled = TRUE;
++    } else {
++        ar->arWmmEnabled = FALSE;
++    }
++
++    ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_WMM_TXOP_CMD cmd;
++    A_STATUS ret;
++
++    if ((dev->flags & IFF_UP) != IFF_UP) {
++        return -EIO;
++    }
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
++                                sizeof(cmd)))
++    {
++        return -EFAULT;
++    }
++
++    ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_STATUS ret = 0;
++
++    if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1),
++                            &ar->arRegCode, sizeof(ar->arRegCode)))
++        ret = -EFAULT;
++
++    return ret;
++}
++
++
++/* Get power mode command */
++static int
++ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_POWER_MODE_CMD power_mode;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi);
++    if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) {
++        ret = -EFAULT;
++    }
++
++    return ret;
++}
++
++
++static int
++ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_CHANNEL_PARAMS_CMD cmd, *cmdp;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (cmd.numChannels > 1) {
++        cmdp = A_MALLOC(130);
++        if (copy_from_user(cmdp, rq->ifr_data,
++                           sizeof (*cmdp) +
++                           ((cmd.numChannels - 1) * sizeof(A_UINT16))))
++        {
++            kfree(cmdp);
++            return -EFAULT;
++        }
++    } else {
++        cmdp = &cmd;
++    }
++
++    if ((ar->arPhyCapability == WMI_11G_CAPABILITY) &&
++        ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE)))
++    {
++        ret = -EINVAL;
++    }
++
++    if (!ret &&
++        (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode,
++                                   cmdp->numChannels, cmdp->channelList)
++         != A_OK))
++    {
++        ret = -EIO;
++    }
++
++    if (cmd.numChannels > 1) {
++        kfree(cmdp);
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq)
++{
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SNR_THRESHOLD_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq)
++{
++#define SWAP_THOLD(thold1, thold2) do { \
++    USER_RSSI_THOLD tmpThold;           \
++    tmpThold.tag = thold1.tag;          \
++    tmpThold.rssi = thold1.rssi;        \
++    thold1.tag = thold2.tag;            \
++    thold1.rssi = thold2.rssi;          \
++    thold2.tag = tmpThold.tag;          \
++    thold2.rssi = tmpThold.rssi;        \
++} while (0)
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_RSSI_THRESHOLD_PARAMS_CMD cmd;
++    USER_RSSI_PARAMS rssiParams;
++    A_INT32 i, j;
++
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) {
++        return -EFAULT;
++    }
++    cmd.weight = rssiParams.weight;
++    cmd.pollTime = rssiParams.pollTime;
++
++    A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map));
++    /*
++     *  only 6 elements, so use bubble sorting, in ascending order
++     */
++    for (i = 5; i > 0; i--) {
++        for (j = 0; j < i; j++) { /* above tholds */
++            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
++                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
++            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
++                return EFAULT;
++            }
++        }
++    }
++    for (i = 11; i > 6; i--) {
++        for (j = 6; j < i; j++) { /* below tholds */
++            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
++                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
++            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
++                return EFAULT;
++            }
++        }
++    }
++
++#ifdef DEBUG
++    for (i = 0; i < 12; i++) {
++        AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n",
++                i, rssi_map[i].tag, i, rssi_map[i].rssi);
++    }
++#endif
++    cmd.thresholdAbove1_Val = rssi_map[0].rssi;
++    cmd.thresholdAbove2_Val = rssi_map[1].rssi;
++    cmd.thresholdAbove3_Val = rssi_map[2].rssi;
++    cmd.thresholdAbove4_Val = rssi_map[3].rssi;
++    cmd.thresholdAbove5_Val = rssi_map[4].rssi;
++    cmd.thresholdAbove6_Val = rssi_map[5].rssi;
++    cmd.thresholdBelow1_Val = rssi_map[6].rssi;
++    cmd.thresholdBelow2_Val = rssi_map[7].rssi;
++    cmd.thresholdBelow3_Val = rssi_map[8].rssi;
++    cmd.thresholdBelow4_Val = rssi_map[9].rssi;
++    cmd.thresholdBelow5_Val = rssi_map[10].rssi;
++    cmd.thresholdBelow6_Val = rssi_map[11].rssi;
++
++    if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq)
++{
++
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_LQ_THRESHOLD_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++
++static int
++ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_PROBED_SSID_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength,
++                                  cmd.ssid) != A_OK)
++    {
++        ret = -EIO;
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_ADD_BAD_AP_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) {
++        return -EIO;
++    }
++
++    if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) {
++        /*
++         * This is a delete badAP.
++         */
++        if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) {
++            ret = -EIO;
++        }
++    } else {
++        if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) {
++            ret = -EIO;
++        }
++    }
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_CREATE_PSTREAM_CMD cmd;
++    A_STATUS ret;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_verify_tspec_params(&cmd, tspecCompliance);
++    if (ret == A_OK)
++        ret = wmi_create_pstream_cmd(ar->arWmi, &cmd);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_DELETE_PSTREAM_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid);
++
++    switch (ret) {
++        case A_OK:
++            return 0;
++        case A_EBUSY :
++            return -EBUSY;
++        case A_NO_MEMORY:
++            return -ENOMEM;
++        case A_EINVAL:
++        default:
++            return -EFAULT;
++    }
++}
++
++static int
++ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ar6000_queuereq qreq;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if( copy_from_user(&qreq, rq->ifr_data,
++                  sizeof(struct ar6000_queuereq)))
++        return -EFAULT;
++
++    qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass);
++
++    if (copy_to_user(rq->ifr_data, &qreq,
++                 sizeof(struct ar6000_queuereq)))
++    {
++        ret = -EFAULT;
++    }
++
++    return ret;
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev,
++                                 struct ifreq *rq, A_UINT8 *data, A_UINT32 len)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT32    buf[2];
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    ar->tcmdRxReport = 0;
++    if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        ret = -EINTR;
++    }
++
++    buf[0] = ar->tcmdRxTotalPkt;
++    buf[1] = ar->tcmdRxRssi;
++    if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) {
++        ret = -EFAULT;
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++void
++ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
++    TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results;
++
++    ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt;
++    ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm;
++    ar->tcmdRxReport = 1;
++
++    wake_up(&arEvent);
++}
++#endif /* CONFIG_HOST_TCMD_SUPPORT*/
++
++static int
++ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_TARGET_ERROR_REPORT_BITMASK cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask);
++
++    return  (ret==0 ? ret : -EINVAL);
++}
++
++static int
++ar6000_clear_target_stats(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++       return -EIO;
++    }
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++    A_MEMZERO(pStats, sizeof(TARGET_STATS));
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++    return ret;
++}
++
++static int
++ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    TARGET_STATS_CMD cmd;
++    TARGET_STATS *pStats = &ar->arTargetStats;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++
++    ar->statsUpdatePending = TRUE;
++
++    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        ret = -EINTR;
++    }
++
++    if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) {
++        ret = -EFAULT;
++    }
++
++    if (cmd.clearStats == 1) {
++        ret = ar6000_clear_target_stats(dev);
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++static int
++ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_ACCESS_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax,
++                                  cmd.aifsn) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_DISC_TIMEOUT_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_VOICE_PKT_SIZE_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_MAX_SP_LEN_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++
++static int
++ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_BT_STATUS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++static int
++ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    WMI_SET_BT_PARAMS_CMD cmd;
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
++        return -EFAULT;
++    }
++
++    if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK)
++    {
++        ret = 0;
++    } else {
++        ret = -EINVAL;
++    }
++
++    return (ret);
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++struct ar6000_gpio_intr_wait_cmd_s  gpio_intr_results;
++/* gpio_reg_results and gpio_data_available are protected by arSem */
++static struct ar6000_gpio_register_cmd_s gpio_reg_results;
++static A_BOOL gpio_data_available; /* Requested GPIO data available */
++static A_BOOL gpio_intr_available; /* GPIO interrupt info available */
++static A_BOOL gpio_ack_received;   /* GPIO ack was received */
++
++/* Host-side initialization for General Purpose I/O support */
++void ar6000_gpio_init(void)
++{
++    gpio_intr_available = FALSE;
++    gpio_data_available = FALSE;
++    gpio_ack_received   = FALSE;
++}
++
++/*
++ * Called when a GPIO interrupt is received from the Target.
++ * intr_values shows which GPIO pins have interrupted.
++ * input_values shows a recent value of GPIO pins.
++ */
++void
++ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values)
++{
++    gpio_intr_results.intr_mask = intr_mask;
++    gpio_intr_results.input_values = input_values;
++    *((volatile A_BOOL *)&gpio_intr_available) = TRUE;
++    wake_up(&arEvent);
++}
++
++/*
++ * This is called when a response is received from the Target
++ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get
++ * call.
++ */
++void
++ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value)
++{
++    gpio_reg_results.gpioreg_id = reg_id;
++    gpio_reg_results.value = value;
++    *((volatile A_BOOL *)&gpio_data_available) = TRUE;
++    wake_up(&arEvent);
++}
++
++/*
++ * This is called when an acknowledgement is received from the Target
++ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set
++ * call.
++ */
++void
++ar6000_gpio_ack_rx(void)
++{
++    gpio_ack_received = TRUE;
++    wake_up(&arEvent);
++}
++
++A_STATUS
++ar6000_gpio_output_set(struct net_device *dev,
++                       A_UINT32 set_mask,
++                       A_UINT32 clear_mask,
++                       A_UINT32 enable_mask,
++                       A_UINT32 disable_mask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_ack_received = FALSE;
++    return wmi_gpio_output_set(ar->arWmi,
++                set_mask, clear_mask, enable_mask, disable_mask);
++}
++
++static A_STATUS
++ar6000_gpio_input_get(struct net_device *dev)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
++    return wmi_gpio_input_get(ar->arWmi);
++}
++
++static A_STATUS
++ar6000_gpio_register_set(struct net_device *dev,
++                         A_UINT32 gpioreg_id,
++                         A_UINT32 value)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_ack_received = FALSE;
++    return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value);
++}
++
++static A_STATUS
++ar6000_gpio_register_get(struct net_device *dev,
++                         A_UINT32 gpioreg_id)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
++    return wmi_gpio_register_get(ar->arWmi, gpioreg_id);
++}
++
++static A_STATUS
++ar6000_gpio_intr_ack(struct net_device *dev,
++                     A_UINT32 ack_mask)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    gpio_intr_available = FALSE;
++    return wmi_gpio_intr_ack(ar->arWmi, ack_mask);
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    HIF_DEVICE *hifDevice = ar->arHifDevice;
++    int ret, param, param2;
++    unsigned int address = 0;
++    unsigned int length = 0;
++    unsigned char *buffer;
++    char *userdata;
++    A_UINT32 connectCtrlFlags;
++
++
++    static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
++                                           WMI_SHORTSCANRATIO_DEFAULT,
++                                           DEFAULT_SCAN_CTRL_FLAGS,
++                                           0};
++    WMI_SET_AKMP_PARAMS_CMD  akmpParams;
++    WMI_SET_PMKID_LIST_CMD   pmkidInfo;
++
++    if (cmd == AR6000_IOCTL_EXTENDED)
++    {
++        /*
++         * This allows for many more wireless ioctls than would otherwise
++         * be available.  Applications embed the actual ioctl command in
++         * the first word of the parameter block, and use the command
++         * AR6000_IOCTL_EXTENDED_CMD on the ioctl call.
++         */
++        get_user(cmd, (int *)rq->ifr_data);
++        userdata = (char *)(((unsigned int *)rq->ifr_data)+1);
++    }
++    else
++    {
++        userdata = (char *)rq->ifr_data;
++    }
++
++    if ((ar->arWlanState == WLAN_DISABLED) &&
++        ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) &&
++         (cmd != AR6000_XIOCTL_DIAG_READ) &&
++         (cmd != AR6000_XIOCTL_DIAG_WRITE)))
++    {
++        return -EIO;
++    }
++
++    ret = 0;
++    switch(cmd)
++    {
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++        case AR6000_XIOCTL_TCMD_CONT_TX:
++            {
++                TCMD_CONT_TX txCmd;
++
++                if (ar->tcmdPm == TCMD_PM_SLEEP) {
++                    A_PRINTF("Can NOT send tx tcmd when target is asleep! \n");
++                    return -EFAULT;
++                }
++
++                if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX)))
++                    return -EFAULT;
++                wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX));
++            }
++            break;
++        case AR6000_XIOCTL_TCMD_CONT_RX:
++            {
++                TCMD_CONT_RX rxCmd;
++
++                if (ar->tcmdPm == TCMD_PM_SLEEP) {
++                    A_PRINTF("Can NOT send rx tcmd when target is asleep! \n");
++                    return -EFAULT;
++                }
++                if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX)))
++                    return -EFAULT;
++                switch(rxCmd.act)
++                {
++                    case TCMD_CONT_RX_PROMIS:
++                    case TCMD_CONT_RX_FILTER:
++                    case TCMD_CONT_RX_SETMAC:
++                         wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd,
++                                                sizeof(TCMD_CONT_RX));
++                         break;
++                    case TCMD_CONT_RX_REPORT:
++                         ar6000_ioctl_tcmd_get_rx_report(dev, rq,
++                         (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX));
++                         break;
++                    default:
++                         A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act);
++                         return -EINVAL;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_TCMD_PM:
++            {
++                TCMD_PM pmCmd;
++
++                if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM)))
++                    return -EFAULT;
++                ar->tcmdPm = pmCmd.mode;
++                wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM));
++            }
++            break;
++#endif /* CONFIG_HOST_TCMD_SUPPORT */
++
++        case AR6000_XIOCTL_BMI_DONE:
++            if(bmienable)
++            {
++                ret = ar6000_init(dev);
++            }
++            else
++            {
++                ret = BMIDone(hifDevice);
++            }
++            break;
++
++        case AR6000_XIOCTL_BMI_READ_MEMORY:
++            get_user(address, (unsigned int *)userdata);
++            get_user(length, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n",
++                             address, length);
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                ret = BMIReadMemory(hifDevice, address, buffer, length);
++                if (copy_to_user(rq->ifr_data, buffer, length)) {
++                    ret = -EFAULT;
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++            break;
++
++        case AR6000_XIOCTL_BMI_WRITE_MEMORY:
++            get_user(address, (unsigned int *)userdata);
++            get_user(length, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n",
++                             address, length);
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                if (copy_from_user(buffer, &userdata[sizeof(address) +
++                                   sizeof(length)], length))
++                {
++                    ret = -EFAULT;
++                } else {
++                    ret = BMIWriteMemory(hifDevice, address, buffer, length);
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++            break;
++
++        case AR6000_XIOCTL_BMI_TEST:
++           AR_DEBUG_PRINTF("No longer supported\n");
++           ret = -EOPNOTSUPP;
++           break;
++
++        case AR6000_XIOCTL_BMI_EXECUTE:
++            get_user(address, (unsigned int *)userdata);
++            get_user(param, (unsigned int *)userdata + 1);
++            AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n",
++                             address, param);
++            ret = BMIExecute(hifDevice, address, &param);
++            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
++            break;
++
++        case AR6000_XIOCTL_BMI_SET_APP_START:
++            get_user(address, (unsigned int *)userdata);
++            AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address);
++            ret = BMISetAppStart(hifDevice, address);
++            break;
++
++        case AR6000_XIOCTL_BMI_READ_SOC_REGISTER:
++            get_user(address, (unsigned int *)userdata);
++            ret = BMIReadSOCRegister(hifDevice, address, &param);
++            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
++            break;
++
++        case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER:
++            get_user(address, (unsigned int *)userdata);
++            get_user(param, (unsigned int *)userdata + 1);
++            ret = BMIWriteSOCRegister(hifDevice, address, param);
++            break;
++
++#ifdef HTC_RAW_INTERFACE
++        case AR6000_XIOCTL_HTC_RAW_OPEN:
++            ret = A_OK;
++            if (!arRawIfEnabled(ar)) {
++                /* make sure block size is set in case the target was reset since last
++                  * BMI phase (i.e. flashup downloads) */
++                ret = ar6000_SetHTCBlockSize(ar);
++                if (A_FAILED(ret)) {
++                    break;
++                }
++                /* Terminate the BMI phase */
++                ret = BMIDone(hifDevice);
++                if (ret == A_OK) {
++                    ret = ar6000_htc_raw_open(ar);
++                }
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_CLOSE:
++            if (arRawIfEnabled(ar)) {
++                ret = ar6000_htc_raw_close(ar);
++                arRawIfEnabled(ar) = FALSE;
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_READ:
++            if (arRawIfEnabled(ar)) {
++                unsigned int streamID;
++                get_user(streamID, (unsigned int *)userdata);
++                get_user(length, (unsigned int *)userdata + 1);
++                buffer = rq->ifr_data + sizeof(length);
++                ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID,
++                                          buffer, length);
++                put_user(ret, (unsigned int *)rq->ifr_data);
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++
++        case AR6000_XIOCTL_HTC_RAW_WRITE:
++            if (arRawIfEnabled(ar)) {
++                unsigned int streamID;
++                get_user(streamID, (unsigned int *)userdata);
++                get_user(length, (unsigned int *)userdata + 1);
++                buffer = userdata + sizeof(streamID) + sizeof(length);
++                ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID,
++                                           buffer, length);
++                put_user(ret, (unsigned int *)rq->ifr_data);
++            } else {
++                ret = A_ERROR;
++            }
++            break;
++#endif /* HTC_RAW_INTERFACE */
++
++        case AR6000_IOCTL_WMI_GETREV:
++        {
++            if (copy_to_user(rq->ifr_data, &ar->arVersion,
++                             sizeof(ar->arVersion)))
++            {
++                ret = -EFAULT;
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETPWR:
++        {
++            WMI_POWER_MODE_CMD pwrModeCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&pwrModeCmd, userdata,
++                                   sizeof(pwrModeCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS:
++        {
++            WMI_IBSS_PM_CAPS_CMD ibssPmCaps;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&ibssPmCaps, userdata,
++                                   sizeof(ibssPmCaps)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl,
++                    ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar->arIbssPsEnable = ibssPmCaps.power_saving;
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_PMPARAMS:
++        {
++            WMI_POWER_PARAMS_CMD pmParams;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&pmParams, userdata,
++                                      sizeof(pmParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period,
++                                     pmParams.pspoll_number,
++                                     pmParams.dtim_policy) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETSCAN:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&scParams, userdata,
++                                      sizeof(scParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) {
++                    ar->arSkipScan = FALSE;
++                } else {
++                    ar->arSkipScan = TRUE;
++                }
++
++                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETLISTENINT:
++        {
++            WMI_LISTEN_INT_CMD listenCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&listenCmd, userdata,
++                                      sizeof(listenCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                    if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) {
++                        ret = -EIO;
++                    } else {
++                        AR6000_SPIN_LOCK(&ar->arLock, 0);
++                        ar->arListenInterval = param;
++                        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                    }
++
++                }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_BMISS_TIME:
++        {
++            WMI_BMISS_TIME_CMD bmissCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&bmissCmd, userdata,
++                                      sizeof(bmissCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SETBSSFILTER:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++
++                get_user(param, (unsigned char *)userdata);
++                get_user(param2, (unsigned int *)(userdata + 1));
++              printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2);
++                if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_snr_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_rssi_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_CLR_RSSISNR:
++        {
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            }
++            ret = wmi_clr_rssi_snr(ar->arWmi);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD:
++        {
++            ret = ar6000_ioctl_set_lq_threshold(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_LPREAMBLE:
++        {
++            WMI_SET_LPREAMBLE_CMD setLpreambleCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setLpreambleCmd, userdata,
++                                   sizeof(setLpreambleCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_RTS:
++        {
++            WMI_SET_RTS_CMD rtsCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&rtsCmd, userdata,
++                                   sizeof(rtsCmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold)
++                       != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WMM:
++        {
++            ret = ar6000_ioctl_set_wmm(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_TXOP:
++        {
++            ret = ar6000_ioctl_set_txop(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_RD:
++        {
++            ret = ar6000_ioctl_get_rd(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_CHANNELPARAMS:
++        {
++            ret = ar6000_ioctl_set_channelParams(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_PROBEDSSID:
++        {
++            ret = ar6000_ioctl_set_probedSsid(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_BADAP:
++        {
++            ret = ar6000_ioctl_set_badAp(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_CREATE_QOS:
++        {
++            ret = ar6000_ioctl_create_qos(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_DELETE_QOS:
++        {
++            ret = ar6000_ioctl_delete_qos(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_GET_QOS_QUEUE:
++        {
++            ret = ar6000_ioctl_get_qos_queue(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_GET_TARGET_STATS:
++        {
++            ret = ar6000_ioctl_get_target_stats(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK:
++        {
++            ret = ar6000_ioctl_set_error_report_bitmask(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ASSOC_INFO:
++        {
++            WMI_SET_ASSOC_INFO_CMD cmd;
++            A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN];
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++                get_user(cmd.ieType, userdata);
++                if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) {
++                    ret = -EIO;
++                } else {
++                    get_user(cmd.bufferSize, userdata + 1);
++                    if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) {
++                        ret = -EFAULT;
++                        break;
++                    }
++                    if (copy_from_user(assocInfo, userdata + 2,
++                                       cmd.bufferSize))
++                    {
++                        ret = -EFAULT;
++                    } else {
++                        if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType,
++                                                 cmd.bufferSize,
++                                                 assocInfo) != A_OK)
++                        {
++                            ret = -EIO;
++                        }
++                    }
++                }
++            }
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS:
++        {
++            ret = ar6000_ioctl_set_access_params(dev, rq);
++            break;
++        }
++        case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT:
++        {
++            ret = ar6000_ioctl_set_disconnect_timeout(dev, rq);
++            break;
++        }
++        case AR6000_XIOCTL_FORCE_TARGET_RESET:
++        {
++            if (ar->arHtcTarget)
++            {
++//                HTCForceReset(htcTarget);
++            }
++            else
++            {
++                AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n");
++            }
++            break;
++        }
++        case AR6000_XIOCTL_TARGET_INFO:
++        case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */
++        {
++            /* If we made it to here, then the Target exists and is ready. */
++
++            if (cmd == AR6000_XIOCTL_TARGET_INFO) {
++                if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver,
++                                 sizeof(ar->arVersion.target_ver)))
++                {
++                    ret = -EFAULT;
++                }
++                if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType,
++                                 sizeof(ar->arTargetType)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS:
++        {
++            WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam;
++
++            if (copy_from_user(&hbparam, userdata, sizeof(hbparam)))
++            {
++                ret = -EFAULT;
++            } else {
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                /* Start a cyclic timer with the parameters provided. */
++                if (hbparam.frequency) {
++                    ar->arHBChallengeResp.frequency = hbparam.frequency;
++                }
++                if (hbparam.threshold) {
++                    ar->arHBChallengeResp.missThres = hbparam.threshold;
++                }
++
++                /* Delete the pending timer and start a new one */
++                if (timer_pending(&ar->arHBChallengeResp.timer)) {
++                    A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
++                }
++                A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP:
++        {
++            A_UINT32 cookie;
++
++            if (copy_from_user(&cookie, userdata, sizeof(cookie))) {
++                return -EFAULT;
++            }
++
++            /* Send the challenge on the control channel */
++            if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) {
++                return -EIO;
++            }
++            break;
++        }
++#ifdef USER_KEYS
++        case AR6000_XIOCTL_USER_SETKEYS:
++        {
++
++            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN;
++
++            if (copy_from_user(&ar->user_key_ctrl, userdata,
++                               sizeof(ar->user_key_ctrl)))
++            {
++                return -EFAULT;
++            }
++
++            A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl);
++            break;
++        }
++#endif /* USER_KEYS */
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++        case AR6000_XIOCTL_GPIO_OUTPUT_SET:
++        {
++            struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_output_set_cmd, userdata,
++                                sizeof(gpio_output_set_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_output_set(dev,
++                                             gpio_output_set_cmd.set_mask,
++                                             gpio_output_set_cmd.clear_mask,
++                                             gpio_output_set_cmd.enable_mask,
++                                             gpio_output_set_cmd.disable_mask);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INPUT_GET:
++        {
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            ret = ar6000_gpio_input_get(dev);
++            if (ret != A_OK) {
++                up(&ar->arSem);
++                return -EIO;
++            }
++
++            /* Wait for Target to respond. */
++            wait_event_interruptible(arEvent, gpio_data_available);
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            } else {
++                A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE);
++
++                if (copy_to_user(userdata, &gpio_reg_results.value,
++                                 sizeof(gpio_reg_results.value)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_REGISTER_SET:
++        {
++            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_register_cmd, userdata,
++                                sizeof(gpio_register_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_register_set(dev,
++                                               gpio_register_cmd.gpioreg_id,
++                                               gpio_register_cmd.value);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++
++                /* Wait for acknowledgement from Target */
++                wait_event_interruptible(arEvent, gpio_ack_received);
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_REGISTER_GET:
++        {
++            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_register_cmd, userdata,
++                                sizeof(gpio_register_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id);
++                if (ret != A_OK) {
++                    up(&ar->arSem);
++                    return -EIO;
++                }
++
++                /* Wait for Target to respond. */
++                wait_event_interruptible(arEvent, gpio_data_available);
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                } else {
++                    A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id);
++                    if (copy_to_user(userdata, &gpio_reg_results,
++                                     sizeof(gpio_reg_results)))
++                    {
++                        ret = -EFAULT;
++                    }
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INTR_ACK:
++        {
++            struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++
++            if (copy_from_user(&gpio_intr_ack_cmd, userdata,
++                                sizeof(gpio_intr_ack_cmd)))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask);
++                if (ret != A_OK) {
++                    ret = EIO;
++                }
++            }
++            up(&ar->arSem);
++            break;
++        }
++        case AR6000_XIOCTL_GPIO_INTR_WAIT:
++        {
++            /* Wait for Target to report an interrupt. */
++            dev_hold(dev);
++            rtnl_unlock();
++            wait_event_interruptible(arEvent, gpio_intr_available);
++            rtnl_lock();
++            __dev_put(dev);
++
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            } else {
++                if (copy_to_user(userdata, &gpio_intr_results,
++                                 sizeof(gpio_intr_results)))
++                {
++                    ret = -EFAULT;
++                }
++            }
++            break;
++        }
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++        case AR6000_XIOCTL_DBGLOG_CFG_MODULE:
++        {
++            struct ar6000_dbglog_module_config_s config;
++
++            if (copy_from_user(&config, userdata, sizeof(config))) {
++                return -EFAULT;
++            }
++
++            /* Send the challenge on the control channel */
++            if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask,
++                                            config.tsr, config.rep,
++                                            config.size, config.valid) != A_OK)
++            {
++                return -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS:
++        {
++            /* Send the challenge on the control channel */
++            if (ar6000_dbglog_get_debug_logs(ar) != A_OK)
++            {
++                return -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_ADHOC_BSSID:
++        {
++            WMI_SET_ADHOC_BSSID_CMD adhocBssid;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&adhocBssid, userdata,
++                                      sizeof(adhocBssid)))
++            {
++                ret = -EFAULT;
++            } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac,
++                                AR6000_ETH_ADDR_LEN) == 0)
++            {
++                ret = -EFAULT;
++            } else {
++
++                A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid));
++        }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_OPT_MODE:
++        {
++        WMI_SET_OPT_MODE_CMD optModeCmd;
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&optModeCmd, userdata,
++                                      sizeof(optModeCmd)))
++            {
++                ret = -EFAULT;
++            } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) {
++                ret = -EFAULT;
++
++            } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode)
++                       != A_OK)
++            {
++                ret = -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_OPT_SEND_FRAME:
++        {
++        WMI_OPT_TX_FRAME_CMD optTxFrmCmd;
++            A_UINT8 data[MAX_OPT_DATA_LEN];
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&optTxFrmCmd, userdata,
++                                      sizeof(optTxFrmCmd)))
++            {
++                ret = -EFAULT;
++            } else if (copy_from_user(data,
++                                      userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1,
++                                      optTxFrmCmd.optIEDataLen))
++            {
++                ret = -EFAULT;
++            } else {
++                ret = wmi_opt_tx_frame_cmd(ar->arWmi,
++                                           optTxFrmCmd.frmType,
++                                           optTxFrmCmd.dstAddr,
++                                           optTxFrmCmd.bssid,
++                                           optTxFrmCmd.optIEDataLen,
++                                           data);
++            }
++
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SETRETRYLIMITS:
++        {
++            WMI_SET_RETRY_LIMITS_CMD setRetryParams;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setRetryParams, userdata,
++                                      sizeof(setRetryParams)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType,
++                                          setRetryParams.trafficClass,
++                                          setRetryParams.maxRetries,
++                                          setRetryParams.enableNotify) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                ar->arMaxRetries = setRetryParams.maxRetries;
++                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL:
++        {
++            WMI_BEACON_INT_CMD bIntvlCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&bIntvlCmd, userdata,
++                       sizeof(bIntvlCmd)))
++            {
++                ret = -EFAULT;
++            } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval)
++                        != A_OK)
++            {
++                ret = -EIO;
++            }
++            break;
++        }
++        case IEEE80211_IOCTL_SETAUTHALG:
++        {
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            struct ieee80211req_authalg req;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&req, userdata,
++                       sizeof(struct ieee80211req_authalg)))
++            {
++                ret = -EFAULT;
++            } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) {
++                ar->arDot11AuthMode  = OPEN_AUTH;
++                ar->arPairwiseCrypto  = NONE_CRYPT;
++                ar->arGroupCrypto     = NONE_CRYPT;
++            } else if (req.auth_alg == AUTH_ALG_LEAP) {
++                ar->arDot11AuthMode   = LEAP_AUTH;
++            } else {
++                ret = -EIO;
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_SET_VOICE_PKT_SIZE:
++            ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata);
++            break;
++
++        case AR6000_XIOCTL_SET_MAX_SP:
++            ret = ar6000_xioctl_set_max_sp_len(dev, userdata);
++            break;
++
++        case AR6000_XIOCTL_WMI_GET_ROAM_TBL:
++            ret = ar6000_ioctl_get_roam_tbl(dev, rq);
++            break;
++        case AR6000_XIOCTL_WMI_SET_ROAM_CTRL:
++            ret = ar6000_ioctl_set_roam_ctrl(dev, userdata);
++            break;
++        case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS:
++            ret = ar6000_ioctl_set_powersave_timers(dev, userdata);
++            break;
++        case AR6000_XIOCTRL_WMI_GET_POWER_MODE:
++            ret = ar6000_ioctl_get_power_mode(dev, rq);
++            break;
++        case AR6000_XIOCTRL_WMI_SET_WLAN_STATE:
++            get_user(ar->arWlanState, (unsigned int *)userdata);
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++                break;
++            }
++
++            if (ar->arWlanState == WLAN_ENABLED) {
++                /* Enable foreground scanning */
++                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK)
++                {
++                    ret = -EIO;
++                }
++                if (ar->arSsidLen) {
++                    ar->arConnectPending = TRUE;
++                    if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
++                                        ar->arDot11AuthMode, ar->arAuthMode,
++                                        ar->arPairwiseCrypto,
++                                        ar->arPairwiseCryptoLen,
++                                        ar->arGroupCrypto, ar->arGroupCryptoLen,
++                                        ar->arSsidLen, ar->arSsid,
++                                        ar->arReqBssid, ar->arChannelHint,
++                                        ar->arConnectCtrlFlags) != A_OK)
++                    {
++                        ret = -EIO;
++                        ar->arConnectPending = FALSE;
++                    }
++                }
++            } else {
++                /* Disconnect from the AP and disable foreground scanning */
++                AR6000_SPIN_LOCK(&ar->arLock, 0);
++                if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
++                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                    wmi_disconnect_cmd(ar->arWmi);
++                } else {
++                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++                }
++
++                if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_GET_ROAM_DATA:
++            ret = ar6000_ioctl_get_roam_data(dev, rq);
++            break;
++        case AR6000_XIOCTL_WMI_SET_BT_STATUS:
++            ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata);
++            break;
++        case AR6000_XIOCTL_WMI_SET_BT_PARAMS:
++            ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata);
++            break;
++        case AR6000_XIOCTL_WMI_STARTSCAN:
++        {
++            WMI_START_SCAN_CMD setStartScanCmd;
++
++            if (ar->arWmiReady == FALSE) {
++                    ret = -EIO;
++                } else if (copy_from_user(&setStartScanCmd, userdata,
++                                          sizeof(setStartScanCmd)))
++                {
++                    ret = -EFAULT;
++                } else {
++                    if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType,
++                                    setStartScanCmd.forceFgScan,
++                                    setStartScanCmd.isLegacy,
++                                    setStartScanCmd.homeDwellTime,
++                                    setStartScanCmd.forceScanInterval) != A_OK)
++                    {
++                        ret = -EIO;
++                    }
++                }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SETFIXRATES:
++        {
++            WMI_FIX_RATES_CMD setFixRatesCmd;
++            A_STATUS returnStatus;
++
++            if (ar->arWmiReady == FALSE) {
++                    ret = -EIO;
++                } else if (copy_from_user(&setFixRatesCmd, userdata,
++                                          sizeof(setFixRatesCmd)))
++                {
++                    ret = -EFAULT;
++                } else {
++                    returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask);
++                    if (returnStatus == A_EINVAL)
++                    {
++                        ret = -EINVAL;
++                    }
++                    else if(returnStatus != A_OK) {
++                        ret = -EIO;
++                    }
++                }
++            break;
++        }
++
++        case AR6000_XIOCTL_WMI_GETFIXRATES:
++        {
++            WMI_FIX_RATES_CMD getFixRatesCmd;
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            int ret = 0;
++
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++            /* Used copy_from_user/copy_to_user to access user space data */
++            if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) {
++                ret = -EFAULT;
++            } else {
++                ar->arRateMask = 0xFFFF;
++
++                if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) {
++                    up(&ar->arSem);
++                    return -EIO;
++                }
++
++                wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ);
++
++                if (signal_pending(current)) {
++                    ret = -EINTR;
++                }
++
++                if (!ret) {
++                    getFixRatesCmd.fixRateMask = ar->arRateMask;
++                }
++
++                if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) {
++                   ret = -EFAULT;
++                }
++
++                up(&ar->arSem);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_AUTHMODE:
++        {
++            WMI_SET_AUTH_MODE_CMD setAuthMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setAuthMode, userdata,
++                                      sizeof(setAuthMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_REASSOCMODE:
++        {
++            WMI_SET_REASSOC_MODE_CMD setReassocMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setReassocMode, userdata,
++                                      sizeof(setReassocMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_DIAG_READ:
++        {
++            A_UINT32 addr, data;
++            get_user(addr, (unsigned int *)userdata);
++            if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
++                ret = -EIO;
++            }
++            put_user(data, (unsigned int *)userdata + 1);
++            break;
++        }
++        case AR6000_XIOCTL_DIAG_WRITE:
++        {
++            A_UINT32 addr, data;
++            get_user(addr, (unsigned int *)userdata);
++            get_user(data, (unsigned int *)userdata + 1);
++            if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
++                ret = -EIO;
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_KEEPALIVE:
++        {
++             WMI_SET_KEEPALIVE_CMD setKeepAlive;
++             if (ar->arWmiReady == FALSE) {
++                 return -EIO;
++             } else if (copy_from_user(&setKeepAlive, userdata,
++                        sizeof(setKeepAlive))){
++                 ret = -EFAULT;
++             } else {
++                 if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) {
++                     ret = -EIO;
++               }
++             }
++             break;
++        }
++        case AR6000_XIOCTL_WMI_GET_KEEPALIVE:
++        {
++            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++            WMI_GET_KEEPALIVE_CMD getKeepAlive;
++            int ret = 0;
++            if (ar->arWmiReady == FALSE) {
++               return -EIO;
++            }
++            if (down_interruptible(&ar->arSem)) {
++                return -ERESTARTSYS;
++            }
++            if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) {
++               ret = -EFAULT;
++            } else {
++            getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi);
++            ar->arKeepaliveConfigured = 0xFF;
++            if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){
++                up(&ar->arSem);
++                return -EIO;
++            }
++            wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ);
++            if (signal_pending(current)) {
++                ret = -EINTR;
++            }
++
++            if (!ret) {
++                getKeepAlive.configured = ar->arKeepaliveConfigured;
++            }
++            if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) {
++               ret = -EFAULT;
++            }
++            up(&ar->arSem);
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_APPIE:
++        {
++            WMI_SET_APPIE_CMD appIEcmd;
++            A_UINT8           appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN];
++            A_UINT32            fType,ieLen;
++
++          if (ar->arWmiReady == FALSE) {
++                  return -EIO;
++          }
++          get_user(fType, (A_UINT32 *)userdata);
++          appIEcmd.mgmtFrmType = fType;
++          if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) {
++                  ret = -EIO;
++          } else {
++                  get_user(ieLen, (A_UINT32 *)(userdata + 4));
++                  appIEcmd.ieLen = ieLen;
++                  if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) {
++                          ret = -EIO;
++                          break;
++                  }
++                  if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) {
++                          ret = -EFAULT;
++                  } else {
++                          if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType,
++                                                appIEcmd.ieLen,  appIeInfo) != A_OK)
++                          {
++                                  ret = -EIO;
++                          }
++                  }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER:
++        {
++            WMI_BSS_FILTER_CMD cmd;
++            A_UINT32    filterType;
++
++            if (copy_from_user(&filterType, userdata, sizeof(A_UINT32)))
++            {
++                return -EFAULT;
++            }
++            if (filterType & (IEEE80211_FILTER_TYPE_BEACON |
++                                    IEEE80211_FILTER_TYPE_PROBE_RESP))
++            {
++                cmd.bssFilter = ALL_BSS_FILTER;
++            } else {
++                cmd.bssFilter = NONE_BSS_FILTER;
++            }
++            if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) {
++                ret = -EIO;
++            }
++
++            AR6000_SPIN_LOCK(&ar->arLock, 0);
++            ar->arMgmtFilter = filterType;
++            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WSC_STATUS:
++        {
++            A_UINT32    wsc_status;
++
++            if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32)))
++            {
++                return -EFAULT;
++            }
++            if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) {
++                ret = -EIO;
++            }
++            break;
++        }
++        case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL:
++        {
++            A_UINT32 ROM_addr;
++            A_UINT32 RAM_addr;
++            A_UINT32 nbytes;
++            A_UINT32 do_activate;
++            A_UINT32 rompatch_id;
++
++            get_user(ROM_addr, (A_UINT32 *)userdata);
++            get_user(RAM_addr, (A_UINT32 *)userdata + 1);
++            get_user(nbytes, (A_UINT32 *)userdata + 2);
++            get_user(do_activate, (A_UINT32 *)userdata + 3);
++            AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x  length: %d\n",
++                             ROM_addr, RAM_addr, nbytes);
++            ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr,
++                                        nbytes, do_activate, &rompatch_id);
++            if (ret == A_OK) {
++                put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */
++            }
++            break;
++        }
++
++        case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL:
++        {
++            A_UINT32 rompatch_id;
++
++            get_user(rompatch_id, (A_UINT32 *)userdata);
++            AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id);
++            ret = BMIrompatchUninstall(hifDevice, rompatch_id);
++            break;
++        }
++
++        case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE:
++        case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE:
++        {
++            A_UINT32 rompatch_count;
++
++            get_user(rompatch_count, (A_UINT32 *)userdata);
++            AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count);
++            length = sizeof(A_UINT32) * rompatch_count;
++            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
++                A_MEMZERO(buffer, length);
++                if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length))
++                {
++                    ret = -EFAULT;
++                } else {
++                    if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) {
++                        ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
++                    } else {
++                        ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
++                    }
++                }
++                A_FREE(buffer);
++            } else {
++                ret = -ENOMEM;
++            }
++
++            break;
++        }
++
++        case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE:
++        {
++            WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setHostSleepMode, userdata,
++                                      sizeof(setHostSleepMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_host_sleep_mode_cmd(ar->arWmi,
++                                &setHostSleepMode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_SET_WOW_MODE:
++        {
++            WMI_SET_WOW_MODE_CMD setWowMode;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&setWowMode, userdata,
++                                      sizeof(setWowMode)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_wow_mode_cmd(ar->arWmi,
++                                &setWowMode) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_GET_WOW_LIST:
++        {
++            WMI_GET_WOW_LIST_CMD getWowList;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&getWowList, userdata,
++                                      sizeof(getWowList)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_get_wow_list_cmd(ar->arWmi,
++                                &getWowList) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN:
++        {
++#define WOW_PATTERN_SIZE 64
++#define WOW_MASK_SIZE 64
++
++            WMI_ADD_WOW_PATTERN_CMD cmd;
++            A_UINT8 mask_data[WOW_PATTERN_SIZE]={0};
++            A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0};
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++
++                if(copy_from_user(&cmd, userdata,
++                            sizeof(WMI_ADD_WOW_PATTERN_CMD)))
++                      return -EFAULT;
++                if (copy_from_user(pattern_data,
++                                      userdata + 3,
++                                      cmd.filter_size)){
++                        ret = -EFAULT;
++                        break;
++                }
++                if (copy_from_user(mask_data,
++                                      (userdata + 3 + cmd.filter_size),
++                                      cmd.filter_size)){
++                        ret = -EFAULT;
++                        break;
++                } else {
++                    if (wmi_add_wow_pattern_cmd(ar->arWmi,
++                                &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){
++                        ret = -EIO;
++                    }
++                }
++            }
++#undef WOW_PATTERN_SIZE
++#undef WOW_MASK_SIZE
++            break;
++        }
++        case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN:
++        {
++            WMI_DEL_WOW_PATTERN_CMD delWowPattern;
++
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&delWowPattern, userdata,
++                                      sizeof(delWowPattern)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_del_wow_pattern_cmd(ar->arWmi,
++                                &delWowPattern) != A_OK)
++                {
++                    ret = -EIO;
++                }
++            }
++            break;
++        }
++        case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE:
++            if (ar->arHtcTarget != NULL) {
++                HTCDumpCreditStates(ar->arHtcTarget);
++            }
++            break;
++        case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE:
++            if (ar->arHtcTarget != NULL) {
++                struct ar6000_traffic_activity_change data;
++
++                if (copy_from_user(&data, userdata, sizeof(data)))
++                {
++                    return -EFAULT;
++                }
++                    /* note, this is used for testing (mbox ping testing), indicate activity
++                     * change using the stream ID as the traffic class */
++                ar6000_indicate_tx_activity(ar,
++                                            (A_UINT8)data.StreamID,
++                                            data.Active ? TRUE : FALSE);
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&connectCtrlFlags, userdata,
++                                      sizeof(connectCtrlFlags)))
++            {
++                ret = -EFAULT;
++            } else {
++                ar->arConnectCtrlFlags = connectCtrlFlags;
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else if (copy_from_user(&akmpParams, userdata,
++                                      sizeof(WMI_SET_AKMP_PARAMS_CMD)))
++            {
++                ret = -EFAULT;
++            } else {
++                if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_SET_PMKID_LIST:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else {
++                if (copy_from_user(&pmkidInfo.numPMKID, userdata,
++                                      sizeof(pmkidInfo.numPMKID)))
++                {
++                    ret = -EFAULT;
++                    break;
++                }
++                if (copy_from_user(&pmkidInfo.pmkidList,
++                                   userdata + sizeof(pmkidInfo.numPMKID),
++                                   pmkidInfo.numPMKID * sizeof(WMI_PMKID)))
++                {
++                    ret = -EFAULT;
++                    break;
++                }
++                if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        case AR6000_XIOCTL_WMI_GET_PMKID_LIST:
++            if (ar->arWmiReady == FALSE) {
++                ret = -EIO;
++            } else  {
++                if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) {
++                    ret = -EIO;
++                }
++            }
++            break;
++        default:
++            ret = -EOPNOTSUPP;
++    }
++    return ret;
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/netbuf.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/netbuf.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/netbuf.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/netbuf.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,225 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/skbuff.h>
++#include <a_config.h>
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "htc_packet.h"
++
++#define AR6000_DATA_OFFSET    64
++
++void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt)
++{
++    skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt);
++}
++
++void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt)
++{
++    skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt);
++}
++
++void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q)
++{
++    return((void *) skb_dequeue((struct sk_buff_head *) q));
++}
++
++int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q)
++{
++    return(skb_queue_len((struct sk_buff_head *) q));
++}
++
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q)
++{
++    return(skb_queue_empty((struct sk_buff_head *) q));
++}
++
++void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q)
++{
++    skb_queue_head_init((struct sk_buff_head *) q);
++}
++
++void *
++a_netbuf_alloc(int size)
++{
++    struct sk_buff *skb;
++    skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size);
++    skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET));
++    return ((void *)skb);
++}
++
++/*
++ * Allocate an SKB w.o. any encapsulation requirement.
++ */
++void *
++a_netbuf_alloc_raw(int size)
++{
++    struct sk_buff *skb;
++
++    skb = dev_alloc_skb(size);
++
++    return ((void *)skb);
++}
++
++void
++a_netbuf_free(void *bufPtr)
++{
++    struct sk_buff *skb = (struct sk_buff *)bufPtr;
++
++    dev_kfree_skb(skb);
++}
++
++A_UINT32
++a_netbuf_to_len(void *bufPtr)
++{
++    return (((struct sk_buff *)bufPtr)->len);
++}
++
++void *
++a_netbuf_to_data(void *bufPtr)
++{
++    return (((struct sk_buff *)bufPtr)->data);
++}
++
++/*
++ * Add len # of bytes to the beginning of the network buffer
++ * pointed to by bufPtr
++ */
++A_STATUS
++a_netbuf_push(void *bufPtr, A_INT32 len)
++{
++    skb_push((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the beginning of the network buffer
++ * pointed to by bufPtr and also fill with data
++ */
++A_STATUS
++a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len)
++{
++    skb_push((struct sk_buff *) bufPtr, len);
++    A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the end of the network buffer
++ * pointed to by bufPtr
++ */
++A_STATUS
++a_netbuf_put(void *bufPtr, A_INT32 len)
++{
++    skb_put((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Add len # of bytes to the end of the network buffer
++ * pointed to by bufPtr and also fill with data
++ */
++A_STATUS
++a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len)
++{
++    char *start = ((struct sk_buff *)bufPtr)->data +
++        ((struct sk_buff *)bufPtr)->len;
++    skb_put((struct sk_buff *)bufPtr, len);
++    A_MEMCPY(start, srcPtr, len);
++
++    return A_OK;
++}
++
++
++/*
++ * Trim the network buffer pointed to by bufPtr to len # of bytes
++ */
++A_STATUS
++a_netbuf_setlen(void *bufPtr, A_INT32 len)
++{
++    skb_trim((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Chop of len # of bytes from the end of the buffer.
++ */
++A_STATUS
++a_netbuf_trim(void *bufPtr, A_INT32 len)
++{
++    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
++
++    return A_OK;
++}
++
++/*
++ * Chop of len # of bytes from the end of the buffer and return the data.
++ */
++A_STATUS
++a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len)
++{
++    char *start = ((struct sk_buff *)bufPtr)->data +
++        (((struct sk_buff *)bufPtr)->len - len);
++
++    A_MEMCPY(dstPtr, start, len);
++    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
++
++    return A_OK;
++}
++
++
++/*
++ * Returns the number of bytes available to a a_netbuf_push()
++ */
++A_INT32
++a_netbuf_headroom(void *bufPtr)
++{
++    return (skb_headroom((struct sk_buff *)bufPtr));
++}
++
++/*
++ * Removes specified number of bytes from the beginning of the buffer
++ */
++A_STATUS
++a_netbuf_pull(void *bufPtr, A_INT32 len)
++{
++    skb_pull((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
++/*
++ * Removes specified number of bytes from the beginning of the buffer
++ * and return the data
++ */
++A_STATUS
++a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len)
++{
++    A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len);
++    skb_pull((struct sk_buff *)bufPtr, len);
++
++    return A_OK;
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/osapi_linux.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/osapi_linux.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/osapi_linux.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/osapi_linux.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,319 @@
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _OSAPI_LINUX_H_
++#define _OSAPI_LINUX_H_
++
++#ifdef __KERNEL__
++
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/jiffies.h>
++#endif
++#include <linux/timer.h>
++#include <linux/delay.h>
++#include <linux/wait.h>
++#ifdef KERNEL_2_4
++#include <asm/arch/irq.h>
++#include <asm/irq.h>
++#endif
++
++#ifdef __GNUC__
++#define __ATTRIB_PACK           __attribute__ ((packed))
++#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
++#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
++#ifndef INLINE
++#define INLINE                  __inline__
++#endif
++#else /* Not GCC */
++#define __ATTRIB_PACK
++#define __ATTRIB_PRINTF
++#define __ATTRIB_NORETURN
++#ifndef INLINE
++#define INLINE                  __inline
++#endif
++#endif /* End __GNUC__ */
++
++#define PREPACK
++#define POSTPACK                __ATTRIB_PACK
++
++/*
++ * Endianes macros
++ */
++#define A_BE2CPU8(x)       ntohb(x)
++#define A_BE2CPU16(x)      ntohs(x)
++#define A_BE2CPU32(x)      ntohl(x)
++
++#define A_LE2CPU8(x)       (x)
++#define A_LE2CPU16(x)      (x)
++#define A_LE2CPU32(x)      (x)
++
++#define A_CPU2BE8(x)       htonb(x)
++#define A_CPU2BE16(x)      htons(x)
++#define A_CPU2BE32(x)      htonl(x)
++
++#define A_MEMCPY(dst, src, len)         memcpy((A_UINT8 *)(dst), (src), (len))
++#define A_MEMZERO(addr, len)            memset(addr, 0, len)
++#define A_MEMCMP(addr1, addr2, len)     memcmp((addr1), (addr2), (len))
++#define A_MALLOC(size)                  kmalloc((size), GFP_KERNEL)
++#define A_MALLOC_NOWAIT(size)           kmalloc((size), GFP_ATOMIC)
++#define A_FREE(addr)                    kfree(addr)
++#define A_PRINTF(args...)               printk(args)
++
++/* Mutual Exclusion */
++typedef spinlock_t                      A_MUTEX_T;
++#define A_MUTEX_INIT(mutex)             spin_lock_init(mutex)
++#define A_MUTEX_LOCK(mutex)             spin_lock_bh(mutex)
++#define A_MUTEX_UNLOCK(mutex)           spin_unlock_bh(mutex)
++#define A_IS_MUTEX_VALID(mutex)         TRUE  /* okay to return true, since A_MUTEX_DELETE does nothing */
++#define A_MUTEX_DELETE(mutex)           /* spin locks are not kernel resources so nothing to free.. */
++
++/* Get current time in ms adding a constant offset (in ms) */
++#define A_GET_MS(offset)    \
++      (jiffies + ((offset) / 1000) * HZ)
++
++/*
++ * Timer Functions
++ */
++#define A_MDELAY(msecs)                 mdelay(msecs)
++typedef struct timer_list               A_TIMER;
++
++#define A_INIT_TIMER(pTimer, pFunction, pArg) do {              \
++    init_timer(pTimer);                                         \
++    (pTimer)->function = (pFunction);                           \
++    (pTimer)->data   = (unsigned long)(pArg);                   \
++} while (0)
++
++/*
++ * Start a Timer that elapses after 'periodMSec' milli-seconds
++ * Support is provided for a one-shot timer. The 'repeatFlag' is
++ * ignored.
++ */
++#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do {                   \
++    if (repeatFlag) {                                                       \
++        printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__);     \
++        panic("Timer Repeat");                                              \
++    }                                                                       \
++    mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000);                \
++} while (0)
++
++/*
++ * Cancel the Timer.
++ */
++#define A_UNTIMEOUT(pTimer) do {                                \
++    del_timer((pTimer));                                        \
++} while (0)
++
++#define A_DELETE_TIMER(pTimer) do {                             \
++} while (0)
++
++/*
++ * Wait Queue related functions
++ */
++typedef wait_queue_head_t               A_WAITQUEUE_HEAD;
++#define A_INIT_WAITQUEUE_HEAD(head)     init_waitqueue_head(head)
++#ifndef wait_event_interruptible_timeout
++#define __wait_event_interruptible_timeout(wq, condition, ret)          \
++do {                                                                    \
++        wait_queue_t __wait;                                            \
++        init_waitqueue_entry(&__wait, current);                         \
++                                                                        \
++        add_wait_queue(&wq, &__wait);                                   \
++        for (;;) {                                                      \
++                set_current_state(TASK_INTERRUPTIBLE);                  \
++                if (condition)                                          \
++                        break;                                          \
++                if (!signal_pending(current)) {                         \
++                        ret = schedule_timeout(ret);                    \
++                        if (!ret)                                       \
++                                break;                                  \
++                        continue;                                       \
++                }                                                       \
++                ret = -ERESTARTSYS;                                     \
++                break;                                                  \
++        }                                                               \
++        current->state = TASK_RUNNING;                                  \
++        remove_wait_queue(&wq, &__wait);                                \
++} while (0)
++
++#define wait_event_interruptible_timeout(wq, condition, timeout)        \
++({                                                                      \
++        long __ret = timeout;                                           \
++        if (!(condition))                                               \
++                __wait_event_interruptible_timeout(wq, condition, __ret); \
++        __ret;                                                          \
++})
++#endif /* wait_event_interruptible_timeout */
++
++#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \
++    wait_event_interruptible_timeout(head, condition, timeout); \
++} while (0)
++
++#define A_WAKE_UP(head)                 wake_up(head)
++
++#ifdef DEBUG
++#define A_ASSERT(expr)  \
++    if (!(expr)) {   \
++        printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
++        panic(#expr); \
++    }
++
++#else
++#define A_ASSERT(expr)
++#endif /* DEBUG */
++
++/*
++ * Initialization of the network buffer subsystem
++ */
++#define A_NETBUF_INIT()
++
++/*
++ * Network buffer queue support
++ */
++typedef struct sk_buff_head A_NETBUF_QUEUE_T;
++
++#define A_NETBUF_QUEUE_INIT(q)  \
++    a_netbuf_queue_init(q)
++
++#define A_NETBUF_ENQUEUE(q, pkt) \
++    a_netbuf_enqueue((q), (pkt))
++#define A_NETBUF_PREQUEUE(q, pkt) \
++    a_netbuf_prequeue((q), (pkt))
++#define A_NETBUF_DEQUEUE(q) \
++    (a_netbuf_dequeue(q))
++#define A_NETBUF_QUEUE_SIZE(q)  \
++    a_netbuf_queue_size(q)
++#define A_NETBUF_QUEUE_EMPTY(q) \
++    a_netbuf_queue_empty(q)
++
++/*
++ * Network buffer support
++ */
++#define A_NETBUF_ALLOC(size) \
++    a_netbuf_alloc(size)
++#define A_NETBUF_ALLOC_RAW(size) \
++    a_netbuf_alloc_raw(size)
++#define A_NETBUF_FREE(bufPtr) \
++    a_netbuf_free(bufPtr)
++#define A_NETBUF_DATA(bufPtr) \
++    a_netbuf_to_data(bufPtr)
++#define A_NETBUF_LEN(bufPtr) \
++    a_netbuf_to_len(bufPtr)
++#define A_NETBUF_PUSH(bufPtr, len) \
++    a_netbuf_push(bufPtr, len)
++#define A_NETBUF_PUT(bufPtr, len) \
++    a_netbuf_put(bufPtr, len)
++#define A_NETBUF_TRIM(bufPtr,len) \
++    a_netbuf_trim(bufPtr, len)
++#define A_NETBUF_PULL(bufPtr, len) \
++    a_netbuf_pull(bufPtr, len)
++#define A_NETBUF_HEADROOM(bufPtr)\
++    a_netbuf_headroom(bufPtr)
++#define A_NETBUF_SETLEN(bufPtr,len) \
++    a_netbuf_setlen(bufPtr, len)
++
++/* Add data to end of a buffer  */
++#define A_NETBUF_PUT_DATA(bufPtr, srcPtr,  len) \
++    a_netbuf_put_data(bufPtr, srcPtr, len)
++
++/* Add data to start of the  buffer */
++#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr,  len) \
++    a_netbuf_push_data(bufPtr, srcPtr, len)
++
++/* Remove data at start of the buffer */
++#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \
++    a_netbuf_pull_data(bufPtr, dstPtr, len)
++
++/* Remove data from the end of the buffer */
++#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \
++    a_netbuf_trim_data(bufPtr, dstPtr, len)
++
++/* View data as "size" contiguous bytes of type "t" */
++#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \
++    (t )( ((struct skbuf *)(bufPtr))->data)
++
++/* return the beginning of the headroom for the buffer */
++#define A_NETBUF_HEAD(bufPtr) \
++        ((((struct sk_buff *)(bufPtr))->head))
++
++/*
++ * OS specific network buffer access routines
++ */
++void *a_netbuf_alloc(int size);
++void *a_netbuf_alloc_raw(int size);
++void a_netbuf_free(void *bufPtr);
++void *a_netbuf_to_data(void *bufPtr);
++A_UINT32 a_netbuf_to_len(void *bufPtr);
++A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len);
++A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len);
++A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len);
++A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len);
++A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len);
++A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len);
++A_INT32 a_netbuf_headroom(void *bufPtr);
++void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt);
++void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt);
++void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
++int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
++void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q);
++
++/*
++ * Kernel v.s User space functions
++ */
++A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n);
++A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n);
++
++#else /* __KERNEL__ */
++
++#ifdef __GNUC__
++#define __ATTRIB_PACK           __attribute__ ((packed))
++#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
++#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
++#ifndef INLINE
++#define INLINE                  __inline__
++#endif
++#else /* Not GCC */
++#define __ATTRIB_PACK
++#define __ATTRIB_PRINTF
++#define __ATTRIB_NORETURN
++#ifndef INLINE
++#define INLINE                  __inline
++#endif
++#endif /* End __GNUC__ */
++
++#define PREPACK
++#define POSTPACK                __ATTRIB_PACK
++
++#endif /* __KERNEL__ */
++
++#endif /* _OSAPI_LINUX_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/wireless_ext.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/wireless_ext.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/ar6000/wireless_ext.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/ar6000/wireless_ext.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1979 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "ar6000_drv.h"
++
++static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi);
++extern unsigned int wmitimeout;
++extern A_WAITQUEUE_HEAD arEvent;
++extern wait_queue_head_t ar6000_scan_queue;
++
++/*
++ * Encode a WPA or RSN information element as a custom
++ * element using the hostap format.
++ */
++static u_int
++encode_ie(void *buf, size_t bufsize,
++    const u_int8_t *ie, size_t ielen,
++    const char *leader, size_t leader_len)
++{
++    u_int8_t *p;
++    int i;
++
++    if (bufsize < leader_len)
++        return 0;
++    p = buf;
++    memcpy(p, leader, leader_len);
++    bufsize -= leader_len;
++    p += leader_len;
++    for (i = 0; i < ielen && bufsize > 2; i++)
++        p += sprintf(p, "%02x", ie[i]);
++    return (i == ielen ? p - (u_int8_t *)buf : 0);
++}
++
++void
++ar6000_scan_node(void *arg, bss_t *ni)
++{
++    struct iw_event iwe;
++#if WIRELESS_EXT > 14
++    char buf[64*2 + 30];
++#endif
++    struct ar_giwscan_param *param;
++    A_CHAR *current_ev;
++    A_CHAR *end_buf;
++    struct ieee80211_common_ie  *cie;
++      struct iw_request_info info;
++
++      info.cmd = 0;
++      info.flags = 0;
++
++    param = (struct ar_giwscan_param *)arg;
++
++    if (param->current_ev >= param->end_buf) {
++        return;
++    }
++    if ((param->firstPass == TRUE) &&
++        ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) {
++        /*
++         * Only forward wpa bss's in first pass
++         */
++        return;
++    }
++
++     if ((param->firstPass == FALSE) &&
++        ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) {
++        /*
++         * Only forward non-wpa bss's in 2nd pass
++         */
++        return;
++    }
++
++    current_ev = param->current_ev;
++    end_buf = param->end_buf;
++
++    cie = &ni->ni_cie;
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWAP;
++    iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
++    A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6);
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_ADDR_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWESSID;
++    iwe.u.data.flags = 1;
++    iwe.u.data.length = cie->ie_ssid[1];
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                      &cie->ie_ssid[2]);
++
++    if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) {
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = SIOCGIWMODE;
++        iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ?
++                IW_MODE_MASTER : IW_MODE_ADHOC;
++        current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                          IW_EV_UINT_LEN);
++    }
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWFREQ;
++    iwe.u.freq.m = cie->ie_chan * 100000;
++    iwe.u.freq.e = 1;
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_FREQ_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = IWEVQUAL;
++    ar6000_set_quality(&iwe.u.qual, ni->ni_snr);
++    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
++                                      IW_EV_QUAL_LEN);
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = SIOCGIWENCODE;
++    if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) {
++        iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
++    } else {
++        iwe.u.data.flags = IW_ENCODE_DISABLED;
++    }
++    iwe.u.data.length = 0;
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, "");
++
++    A_MEMZERO(&iwe, sizeof(iwe));
++    iwe.cmd = IWEVCUSTOM;
++    snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt);
++    iwe.u.data.length = strlen(buf);
++    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf);
++
++    if (cie->ie_wpa != NULL) {
++        static const char wpa_leader[] = "wpa_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa,
++                                      cie->ie_wpa[1]+2,
++                                      wpa_leader, sizeof(wpa_leader)-1);
++
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                                                         buf);
++        }
++    }
++
++    if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) {
++        static const char rsn_leader[] = "rsn_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn,
++                                      cie->ie_rsn[1]+2,
++                                      rsn_leader, sizeof(rsn_leader)-1);
++
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                                                         buf);
++        }
++    }
++
++    if (cie->ie_wmm != NULL) {
++        static const char wmm_leader[] = "wmm_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm,
++                                      cie->ie_wmm[1]+2,
++                                      wmm_leader, sizeof(wmm_leader)-1);
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                                                         buf);
++        }
++    }
++
++    if (cie->ie_ath != NULL) {
++        static const char ath_leader[] = "ath_ie=";
++
++        A_MEMZERO(&iwe, sizeof(iwe));
++        iwe.cmd = IWEVCUSTOM;
++        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath,
++                                      cie->ie_ath[1]+2,
++                                      ath_leader, sizeof(ath_leader)-1);
++        if (iwe.u.data.length != 0) {
++            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
++                                                                         buf);
++        }
++    }
++
++    param->current_ev = current_ev;
++}
++
++int
++ar6000_ioctl_giwscan(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_point *data, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ar_giwscan_param param;
++    int i;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    param.current_ev = extra;
++    param.end_buf = extra + IW_SCAN_MAX_DATA;
++    param.firstPass = TRUE;
++
++    /*
++     * Do two passes to insure WPA scan candidates
++     * are sorted to the front.  This is a hack to deal with
++     * the wireless extensions capping scan results at
++     * IW_SCAN_MAX_DATA bytes.  In densely populated environments
++     * it's easy to overflow this buffer (especially with WPA/RSN
++     * information elements).  Note this sorting hack does not
++     * guarantee we won't overflow anyway.
++     */
++    for (i = 0; i < 2; i++) {
++        /*
++         * Translate data to WE format.
++         */
++        wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, &param);
++        param.firstPass = FALSE;
++        if (param.current_ev >= param.end_buf) {
++            data->length = param.current_ev - extra;
++            return -E2BIG;
++        }
++    }
++
++    data->length = param.current_ev - extra;
++    return 0;
++}
++
++extern int reconnect_flag;
++/* SIOCSIWESSID */
++static int
++ar6000_ioctl_siwessid(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *ssid)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_STATUS status;
++    A_UINT8     arNetworkType;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    /*
++     * iwconfig passes a string with length excluding any trailing NUL.
++     * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall
++     * over badly if we do. So we limit the ESSID to 31 bytes.
++     */
++    if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) {
++        /*
++         * ssid is invalid
++         */
++        return -EINVAL;
++    }
++    /* Added for bug 25178, return an IOCTL error instead of target returning
++       Illegal parameter error when either the BSSID or channel is missing
++       and we cannot scan during connect.
++     */
++    if (data->flags) {
++        if (ar->arSkipScan == TRUE &&
++            (ar->arChannelHint == 0 ||
++             (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] &&
++              !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5])))
++        {
++            return -EINVAL;
++        }
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++
++    if (ar->arTxPending[WMI_CONTROL_PRI]) {
++        /*
++         * sleep until the command queue drains
++         */
++        wait_event_interruptible_timeout(arEvent,
++            ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ);
++        if (signal_pending(current)) {
++            return -EINTR;
++        }
++    }
++
++    if (!data->flags) {
++        arNetworkType = ar->arNetworkType;
++        ar6000_init_profile_info(ar);
++        ar->arNetworkType = arNetworkType;
++    }
++
++    /*
++     * The original logic here prevented a disconnect if issuing an "essid off"
++     * if no ESSID was set, presumably to prevent sending multiple disconnects
++     * to the WMI.
++     *
++     * Unfortunately, this also meant that no disconnect was sent when we were
++     * already connected, but the profile has been changed since (which also
++     * clears the ESSID as a reminder that the WMI needs updating.)
++     *
++     * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't
++     * seem to mind being sent multiple disconnects.
++     */
++    if (1 || (ar->arSsidLen) || (!data->flags))
++    {
++        if ((!data->flags) ||
++            (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) ||
++            (ar->arSsidLen != (data->length)))
++        {
++            /*
++             * SSID set previously or essid off has been issued.
++             *
++             * Disconnect Command is issued in two cases after wmi is ready
++             * (1) ssid is different from the previous setting
++             * (2) essid off has been issued
++             *
++             */
++            if (ar->arWmiReady == TRUE) {
++                reconnect_flag = 0;
++                status = wmi_disconnect_cmd(ar->arWmi);
++                A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++                ar->arSsidLen = 0;
++                if (ar->arSkipScan == FALSE) {
++                    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++                }
++                if (!data->flags) {
++                    up(&ar->arSem);
++                    return 0;
++                }
++            } else {
++                 up(&ar->arSem);
++            }
++        }
++        else
++        {
++            /*
++             * SSID is same, so we assume profile hasn't changed.
++             * If the interface is up and wmi is ready, we issue
++             * a reconnect cmd. Issue a reconnect only we are already
++             * connected.
++             */
++            if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE))
++            {
++                reconnect_flag = TRUE;
++                status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
++                                           ar->arChannelHint);
++                up(&ar->arSem);
++                if (status != A_OK) {
++                    return -EIO;
++                }
++                return 0;
++            }
++            else{
++                /*
++                 * Dont return if connect is pending.
++                 */
++                if(!(ar->arConnectPending)) {
++                    up(&ar->arSem);
++                    return 0;
++                }
++            }
++        }
++    }
++
++    ar->arSsidLen = data->length;
++    A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen);
++
++    /* The ssid length check prevents second "essid off" from the user,
++       to be treated as a connect cmd. The second "essid off" is ignored.
++    */
++    if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) )
++    {
++        AR6000_SPIN_LOCK(&ar->arLock, 0);
++        if (SHARED_AUTH == ar->arDot11AuthMode) {
++            ar6000_install_static_wep_keys(ar);
++        }
++        AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\
++                        " PW crypto %d PW crypto Len %d GRP crypto %d"\
++                        " GRP crypto Len %d\n",
++                        ar->arAuthMode, ar->arDot11AuthMode,
++                        ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
++                        ar->arGroupCrypto, ar->arGroupCryptoLen);
++        reconnect_flag = 0;
++        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++        status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
++                                 ar->arDot11AuthMode, ar->arAuthMode,
++                                 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
++                                 ar->arGroupCrypto,ar->arGroupCryptoLen,
++                                 ar->arSsidLen, ar->arSsid,
++                                 ar->arReqBssid, ar->arChannelHint,
++                                 ar->arConnectCtrlFlags);
++
++
++        up(&ar->arSem);
++
++        if (status != A_OK) {
++            return -EIO;
++        }
++        ar->arConnectPending = TRUE;
++    }else{
++      up(&ar->arSem);
++    }
++    return 0;
++}
++
++/* SIOCGIWESSID */
++static int
++ar6000_ioctl_giwessid(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *essid)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    data->flags = 1;
++    data->length = ar->arSsidLen;
++    A_MEMCPY(essid, ar->arSsid, ar->arSsidLen);
++
++    return 0;
++}
++
++
++void ar6000_install_static_wep_keys(AR_SOFTC_T *ar)
++{
++    A_UINT8 index;
++    A_UINT8 keyUsage;
++
++    for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
++        if (ar->arWepKeyList[index].arKeyLen) {
++            keyUsage = GROUP_USAGE;
++            if (index == ar->arDefTxKeyIndex) {
++                keyUsage |= TX_USAGE;
++            }
++            wmi_addKey_cmd(ar->arWmi,
++                           index,
++                           WEP_CRYPT,
++                           keyUsage,
++                           ar->arWepKeyList[index].arKeyLen,
++                           NULL,
++                           ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL,
++                           NO_SYNC_WMIFLAG);
++        }
++    }
++}
++
++int
++ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return 0;
++}
++
++int
++ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra;
++
++    if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE))
++              return -EIO;
++
++    switch (mlme->im_op) {
++        case IEEE80211_MLME_DISASSOC:
++        case IEEE80211_MLME_DEAUTH:
++            /* Not Supported */
++            break;
++        default:
++            break;
++    }
++    return 0;
++}
++
++
++int
++ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int
++ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info,
++                        struct iw_point *data, char *extra)
++{
++      /* The target generates the WPA/RSN IE */
++      return 0;
++}
++
++int
++ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra;
++    int ret = 0;
++
++
++    AR6000_SPIN_LOCK(&ar->arLock, 0);
++
++    if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) {
++        ar->arDot11AuthMode  = OPEN_AUTH;
++    } else if (req->auth_alg == AUTH_ALG_LEAP) {
++        ar->arDot11AuthMode   = LEAP_AUTH;
++        ar->arPairwiseCrypto  = WEP_CRYPT;
++        ar->arGroupCrypto     = WEP_CRYPT;
++    } else {
++        ret = -EIO;
++    }
++
++    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
++
++    return ret;
++}
++static int
++ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info,
++             void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_addpmkid  *req = (struct ieee80211req_addpmkid *)extra;
++    A_STATUS status;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n",
++                    req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2],
++                    req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5],
++                    req->pi_enable);
++
++    status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid,
++                              req->pi_enable);
++
++    if (status != A_OK) {
++        return -EIO;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCSIWRATE
++ */
++int
++ar6000_ioctl_siwrate(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT32  kbps;
++
++    if (rrq->fixed) {
++        kbps = rrq->value / 1000;           /* rrq->value is in bps */
++    } else {
++        kbps = -1;                          /* -1 indicates auto rate */
++    }
++    if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL)
++    {
++        AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps);
++        return -EINVAL;
++    }
++    ar->arBitRate = kbps;
++    if(ar->arWmiReady == TRUE)
++    {
++        if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) {
++            return -EINVAL;
++        }
++    }
++    return 0;
++}
++
++/*
++ * SIOCGIWRATE
++ */
++int
++ar6000_ioctl_giwrate(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        ar->arBitRate = 0xFFFF;
++        if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) {
++            up(&ar->arSem);
++            return -EIO;
++        }
++        wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ);
++        if (signal_pending(current)) {
++            ret = -EINTR;
++        }
++    }
++    /* If the interface is down or wmi is not ready or the target is not
++       connected - return the value stored in the device structure */
++    if (!ret) {
++        if (ar->arBitRate == -1) {
++            rrq->fixed = TRUE;
++            rrq->value = 0;
++        } else {
++            rrq->value = ar->arBitRate * 1000;
++        }
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++/*
++ * SIOCSIWTXPOW
++ */
++static int
++ar6000_ioctl_siwtxpow(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8 dbM;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arRadioSwitch == WLAN_ENABLED
++      && rrq->disabled) {
++          if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0)
++                  return -EIO;
++          ar->arRadioSwitch = WLAN_DISABLED;
++    } else if (ar->arRadioSwitch == WLAN_DISABLED
++             && !rrq->disabled) {
++          if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0)
++                  return -EIO;
++          ar->arRadioSwitch = WLAN_ENABLED;
++    }
++
++    if (rrq->fixed) {
++        if (rrq->flags != IW_TXPOW_DBM) {
++            return -EOPNOTSUPP;
++        }
++        ar->arTxPwr= dbM = rrq->value;
++        ar->arTxPwrSet = TRUE;
++    } else {
++        ar->arTxPwr = dbM = 0;
++        ar->arTxPwrSet = FALSE;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM);
++        wmi_set_txPwr_cmd(ar->arWmi, dbM);
++    }
++    return 0;
++}
++
++/*
++ * SIOCGIWTXPOW
++ */
++int
++ar6000_ioctl_giwtxpow(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arRadioSwitch == WLAN_DISABLED) {
++          rrq->disabled = 1;
++          return 0;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE))
++    {
++        ar->arTxPwr = 0;
++
++        if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) {
++            up(&ar->arSem);
++            return -EIO;
++        }
++
++        wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ);
++
++        if (signal_pending(current)) {
++            ret = -EINTR;
++         }
++    }
++   /* If the interace is down or wmi is not ready or target is not connected
++      then return value stored in the device structure */
++
++    if (!ret) {
++         if (ar->arTxPwrSet == TRUE) {
++            rrq->fixed = TRUE;
++        }
++        rrq->value = ar->arTxPwr;
++        rrq->flags = IW_TXPOW_DBM;
++    }
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++/*
++ * SIOCSIWRETRY
++ * since iwconfig only provides us with one max retry value, we use it
++ * to apply to data frames of the BE traffic class.
++ */
++static int
++ar6000_ioctl_siwretry(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (rrq->disabled) {
++        return -EOPNOTSUPP;
++    }
++
++    if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) {
++        return -EOPNOTSUPP;
++    }
++
++    if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) {
++            return - EINVAL;
++    }
++    if(ar->arWmiReady == TRUE)
++    {
++        if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE,
++                                     rrq->value, 0) != A_OK){
++            return -EINVAL;
++        }
++    }
++    ar->arMaxRetries = rrq->value;
++    return 0;
++}
++
++/*
++ * SIOCGIWRETRY
++ */
++static int
++ar6000_ioctl_giwretry(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_param *rrq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    rrq->disabled = 0;
++    switch (rrq->flags & IW_RETRY_TYPE) {
++    case IW_RETRY_LIFETIME:
++        return -EOPNOTSUPP;
++        break;
++    case IW_RETRY_LIMIT:
++        rrq->flags = IW_RETRY_LIMIT;
++        switch (rrq->flags & IW_RETRY_MODIFIER) {
++        case IW_RETRY_MIN:
++            rrq->flags |= IW_RETRY_MIN;
++            rrq->value = WMI_MIN_RETRIES;
++            break;
++        case IW_RETRY_MAX:
++            rrq->flags |= IW_RETRY_MAX;
++            rrq->value = ar->arMaxRetries;
++            break;
++        }
++        break;
++    }
++    return 0;
++}
++
++/*
++ * SIOCSIWENCODE
++ */
++static int
++ar6000_ioctl_siwencode(struct net_device *dev,
++              struct iw_request_info *info,
++              struct iw_point *erq, char *keybuf)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int index;
++    A_INT32 auth = ar->arDot11AuthMode;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    index = erq->flags & IW_ENCODE_INDEX;
++
++    if (index && (((index - 1) < WMI_MIN_KEY_INDEX) ||
++                  ((index - 1) > WMI_MAX_KEY_INDEX)))
++    {
++        return -EIO;
++    }
++
++    if (erq->flags & IW_ENCODE_DISABLED) {
++        /*
++         * Encryption disabled
++         */
++        if (index) {
++            /*
++             * If key index was specified then clear the specified key
++             */
++            index--;
++            A_MEMZERO(ar->arWepKeyList[index].arKey,
++                      sizeof(ar->arWepKeyList[index].arKey));
++            ar->arWepKeyList[index].arKeyLen = 0;
++        }
++        ar->arDot11AuthMode       = OPEN_AUTH;
++        ar->arPairwiseCrypto      = NONE_CRYPT;
++        ar->arGroupCrypto         = NONE_CRYPT;
++        ar->arAuthMode            = NONE_AUTH;
++    } else {
++        /*
++         * Enabling WEP encryption
++         */
++        if (index) {
++            index--;                /* keyindex is off base 1 in iwconfig */
++        }
++
++        if (erq->flags & IW_ENCODE_OPEN) {
++            auth = OPEN_AUTH;
++        } else if (erq->flags & IW_ENCODE_RESTRICTED) {
++            auth = SHARED_AUTH;
++        }
++
++        if (erq->length) {
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) {
++                return -EIO;
++            }
++
++            A_MEMZERO(ar->arWepKeyList[index].arKey,
++                      sizeof(ar->arWepKeyList[index].arKey));
++            A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length);
++            ar->arWepKeyList[index].arKeyLen = erq->length;
++        } else {
++            if (ar->arWepKeyList[index].arKeyLen == 0) {
++                return -EIO;
++            }
++            ar->arDefTxKeyIndex = index;
++        }
++
++        ar->arPairwiseCrypto      = WEP_CRYPT;
++        ar->arGroupCrypto         = WEP_CRYPT;
++        ar->arDot11AuthMode       = auth;
++        ar->arAuthMode            = NONE_AUTH;
++    }
++
++    /*
++     * profile has changed.  Erase ssid to signal change
++     */
++    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++    ar->arSsidLen = 0;
++
++    return 0;
++}
++
++static int
++ar6000_ioctl_giwencode(struct net_device *dev,
++              struct iw_request_info *info,
++              struct iw_point *erq, char *key)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    A_UINT8 keyIndex;
++    struct ar_wep_key *wk;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arPairwiseCrypto == NONE_CRYPT) {
++        erq->length = 0;
++        erq->flags = IW_ENCODE_DISABLED;
++    } else {
++        /* get the keyIndex */
++        keyIndex = erq->flags & IW_ENCODE_INDEX;
++        if (0 == keyIndex) {
++            keyIndex = ar->arDefTxKeyIndex;
++        } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) ||
++                   (keyIndex - 1 > WMI_MAX_KEY_INDEX))
++        {
++            keyIndex = WMI_MIN_KEY_INDEX;
++        } else {
++            keyIndex--;
++        }
++        erq->flags = keyIndex + 1;
++        erq->flags |= IW_ENCODE_ENABLED;
++        wk = &ar->arWepKeyList[keyIndex];
++        if (erq->length > wk->arKeyLen) {
++            erq->length = wk->arKeyLen;
++        }
++        if (wk->arKeyLen) {
++            A_MEMCPY(key, wk->arKey, erq->length);
++        }
++        if (ar->arDot11AuthMode == OPEN_AUTH) {
++            erq->flags |= IW_ENCODE_OPEN;
++        } else if (ar->arDot11AuthMode == SHARED_AUTH) {
++            erq->flags |= IW_ENCODE_RESTRICTED;
++        }
++    }
++
++    return 0;
++}
++
++static int ar6000_ioctl_siwpower(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++      AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++      WMI_POWER_MODE power_mode;
++
++      if (wrqu->power.disabled)
++              power_mode = MAX_PERF_POWER;
++      else
++              power_mode = REC_POWER;
++
++      if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0)
++              return -EIO;
++
++      return 0;
++}
++
++static int ar6000_ioctl_giwpower(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++      AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++      /*
++       * FIXME:
++       * https://docs.openmoko.org/trac/ticket/2267
++       * When starting wpa_supplicant the kernel oopses.
++       * The following condition avoids the oops.
++       * Remove this comment to bless this solution.
++       */
++      if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE)
++              return -EIO;
++
++      return wmi_get_power_mode_cmd(ar->arWmi);
++}
++
++static int ar6000_ioctl_siwgenie(struct net_device *dev,
++                               struct iw_request_info *info,
++                               struct iw_point *dwrq,
++                               char *extra)
++{
++      /* The target does that for us */
++      return 0;
++}
++
++static int ar6000_ioctl_giwgenie(struct net_device *dev,
++                               struct iw_request_info *info,
++                               struct iw_point *dwrq,
++                               char *extra)
++{
++      return 0;
++}
++
++static int ar6000_ioctl_siwauth(struct net_device *dev,
++                              struct iw_request_info *info,
++                              struct iw_param *param,
++                              char *extra)
++{
++      AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++      int reset = 0;
++
++      switch (param->flags & IW_AUTH_INDEX) {
++      case IW_AUTH_WPA_VERSION:
++              if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
++                      ar->arAuthMode = NONE_AUTH;
++              }
++              if (param->value & IW_AUTH_WPA_VERSION_WPA) {
++                      ar->arAuthMode = WPA_AUTH;
++              }
++              if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
++                      ar->arAuthMode = WPA2_AUTH;
++              }
++
++              reset = 1;
++              break;
++      case IW_AUTH_CIPHER_PAIRWISE:
++              if (param->value & IW_AUTH_CIPHER_NONE) {
++                      ar->arPairwiseCrypto = NONE_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_WEP40) {
++                      ar->arPairwiseCrypto = WEP_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_TKIP) {
++                      ar->arPairwiseCrypto = TKIP_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_CCMP) {
++                      ar->arPairwiseCrypto = AES_CRYPT;
++              }
++
++              reset = 1;
++              break;
++      case IW_AUTH_CIPHER_GROUP:
++              if (param->value & IW_AUTH_CIPHER_NONE) {
++                      ar->arGroupCrypto = NONE_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_WEP40) {
++                      ar->arGroupCrypto = WEP_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_TKIP) {
++                      ar->arGroupCrypto = TKIP_CRYPT;
++              }
++              if (param->value & IW_AUTH_CIPHER_CCMP) {
++                      ar->arGroupCrypto = AES_CRYPT;
++              }
++
++              reset = 1;
++              break;
++      case IW_AUTH_KEY_MGMT:
++              if (param->value & IW_AUTH_KEY_MGMT_PSK) {
++                      if (ar->arAuthMode == WPA_AUTH) {
++                              ar->arAuthMode = WPA_PSK_AUTH;
++                      } else if (ar->arAuthMode == WPA2_AUTH) {
++                              ar->arAuthMode = WPA2_PSK_AUTH;
++                      }
++
++                      reset = 1;
++              }
++              break;
++
++      case IW_AUTH_TKIP_COUNTERMEASURES:
++              if (ar->arWmiReady == FALSE) {
++                      return -EIO;
++              }
++              wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value);
++              break;
++
++      case IW_AUTH_DROP_UNENCRYPTED:
++              break;
++
++      case IW_AUTH_80211_AUTH_ALG:
++              if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
++                      ar->arDot11AuthMode  = OPEN_AUTH;
++              }
++              if (param->value & IW_AUTH_ALG_SHARED_KEY) {
++                      ar->arDot11AuthMode  = SHARED_AUTH;
++              }
++              if (param->value & IW_AUTH_ALG_LEAP) {
++                      ar->arDot11AuthMode   = LEAP_AUTH;
++                      ar->arPairwiseCrypto  = WEP_CRYPT;
++                      ar->arGroupCrypto     = WEP_CRYPT;
++              }
++
++              reset = 1;
++              break;
++
++      case IW_AUTH_WPA_ENABLED:
++              reset = 1;
++              break;
++
++      case IW_AUTH_RX_UNENCRYPTED_EAPOL:
++              break;
++
++      case IW_AUTH_PRIVACY_INVOKED:
++              break;
++
++      default:
++              printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags);
++              return -EOPNOTSUPP;
++      }
++
++      if (reset) {
++              A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++              ar->arSsidLen = 0;
++      }
++
++      return 0;
++}
++
++static int ar6000_ioctl_giwauth(struct net_device *dev,
++                              struct iw_request_info *info,
++                              struct iw_param *dwrq,
++                              char *extra)
++{
++      return 0;
++}
++
++static int ar6000_ioctl_siwencodeext(struct net_device *dev,
++                                   struct iw_request_info *info,
++                                   union iwreq_data *wrqu,
++                                   char *extra)
++{
++      AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++      struct iw_point *encoding = &wrqu->encoding;
++      struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
++      int alg = ext->alg, idx;
++
++      if (ar->arWlanState == WLAN_DISABLED) {
++              return -EIO;
++      }
++
++      /* Determine and validate the key index */
++      idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
++      if (idx) {
++              if (idx < 0 || idx > 3)
++                      return -EINVAL;
++      }
++
++      if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) {
++              struct ieee80211req_key ik;
++              KEY_USAGE key_usage;
++              CRYPTO_TYPE key_type = NONE_CRYPT;
++              int status;
++
++              ar->user_saved_keys.keyOk = FALSE;
++
++              if (alg == IW_ENCODE_ALG_TKIP) {
++                      key_type = TKIP_CRYPT;
++                      ik.ik_type = IEEE80211_CIPHER_TKIP;
++              } else {
++                      key_type = AES_CRYPT;
++                      ik.ik_type = IEEE80211_CIPHER_AES_CCM;
++              }
++
++              ik.ik_keyix = idx;
++              ik.ik_keylen = ext->key_len;
++              ik.ik_flags = IEEE80211_KEY_RECV;
++              if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
++                      ik.ik_flags |= IEEE80211_KEY_XMIT
++                              | IEEE80211_KEY_DEFAULT;
++              }
++
++              if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
++                      memcpy(&ik.ik_keyrsc, ext->rx_seq, 8);
++              }
++
++              memcpy(ik.ik_keydata, ext->key, ext->key_len);
++
++              ar->user_saved_keys.keyType = key_type;
++              if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
++                      key_usage = GROUP_USAGE;
++                      memset(ik.ik_macaddr, 0, ETH_ALEN);
++                      memcpy(&ar->user_saved_keys.bcast_ik, &ik,
++                             sizeof(struct ieee80211req_key));
++              } else {
++                      key_usage = PAIRWISE_USAGE;
++                      memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN);
++                      memcpy(&ar->user_saved_keys.ucast_ik, &ik,
++                             sizeof(struct ieee80211req_key));
++              }
++
++              status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type,
++                                      key_usage, ik.ik_keylen,
++                                      (A_UINT8 *)&ik.ik_keyrsc,
++                                      ik.ik_keydata,
++                                      KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG);
++
++              if (status < 0)
++                      return -EIO;
++
++              ar->user_saved_keys.keyOk = TRUE;
++
++              return 0;
++
++      } else {
++              /* WEP falls back to SIWENCODE */
++              return -EOPNOTSUPP;
++      }
++
++      return 0;
++}
++
++
++static int ar6000_ioctl_giwencodeext(struct net_device *dev,
++                                   struct iw_request_info *info,
++                                   struct iw_point *dwrq,
++                                   char *extra)
++{
++      return 0;
++}
++
++
++static int
++ar6000_ioctl_setparam(struct net_device *dev,
++                      struct iw_request_info *info,
++                      void *erq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int *i = (int *)extra;
++    int param = i[0];
++    int value = i[1];
++    int ret = 0;
++    A_BOOL profChanged = FALSE;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (param) {
++        case IEEE80211_PARAM_WPA:
++            switch (value) {
++                case WPA_MODE_WPA1:
++                    ar->arAuthMode = WPA_AUTH;
++                    profChanged    = TRUE;
++                    break;
++                case WPA_MODE_WPA2:
++                    ar->arAuthMode = WPA2_AUTH;
++                    profChanged    = TRUE;
++                    break;
++                case WPA_MODE_NONE:
++                    ar->arAuthMode = NONE_AUTH;
++                    profChanged    = TRUE;
++                    break;
++          default:
++                  printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value);
++            }
++            break;
++        case IEEE80211_PARAM_AUTHMODE:
++            switch(value) {
++                case IEEE80211_AUTH_WPA_PSK:
++                    if (WPA_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA_PSK_AUTH;
++                        profChanged    = TRUE;
++                    } else if (WPA2_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA2_PSK_AUTH;
++                        profChanged    = TRUE;
++                    } else {
++                        AR_DEBUG_PRINTF("Error -  Setting PSK mode when WPA "\
++                                        "param was set to %d\n",
++                                        ar->arAuthMode);
++                        ret = -1;
++                    }
++                    break;
++                case IEEE80211_AUTH_WPA_CCKM:
++                    if (WPA2_AUTH == ar->arAuthMode) {
++                        ar->arAuthMode = WPA2_AUTH_CCKM;
++                    } else {
++                        ar->arAuthMode = WPA_AUTH_CCKM;
++                    }
++                    break;
++                default:
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_UCASTCIPHER:
++            switch (value) {
++                case IEEE80211_CIPHER_AES_CCM:
++                    ar->arPairwiseCrypto = AES_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_TKIP:
++                    ar->arPairwiseCrypto = TKIP_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_WEP:
++                    ar->arPairwiseCrypto = WEP_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++                case IEEE80211_CIPHER_NONE:
++                    ar->arPairwiseCrypto = NONE_CRYPT;
++                    profChanged          = TRUE;
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_UCASTKEYLEN:
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
++                ret = -EIO;
++            } else {
++                ar->arPairwiseCryptoLen = value;
++            }
++            break;
++        case IEEE80211_PARAM_MCASTCIPHER:
++            switch (value) {
++                case IEEE80211_CIPHER_AES_CCM:
++                    ar->arGroupCrypto = AES_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_TKIP:
++                    ar->arGroupCrypto = TKIP_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_WEP:
++                    ar->arGroupCrypto = WEP_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++                case IEEE80211_CIPHER_NONE:
++                    ar->arGroupCrypto = NONE_CRYPT;
++                    profChanged       = TRUE;
++                    break;
++            }
++            break;
++        case IEEE80211_PARAM_MCASTKEYLEN:
++            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
++                ret = -EIO;
++            } else {
++                ar->arGroupCryptoLen = value;
++            }
++            break;
++        case IEEE80211_PARAM_COUNTERMEASURES:
++            if (ar->arWmiReady == FALSE) {
++                return -EIO;
++            }
++            wmi_set_tkip_countermeasures_cmd(ar->arWmi, value);
++            break;
++        default:
++            break;
++    }
++
++    if (profChanged == TRUE) {
++        /*
++         * profile has changed.  Erase ssid to signal change
++         */
++      A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
++      ar->arSsidLen = 0;
++    }
++
++    return ret;
++}
++
++int
++ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info,
++            void *w, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++int
++ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info,
++                  void *w, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct ieee80211req_key *ik = (struct ieee80211req_key *)extra;
++    KEY_USAGE keyUsage;
++    A_STATUS status;
++    CRYPTO_TYPE keyType = NONE_CRYPT;
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    ar->user_saved_keys.keyOk = FALSE;
++
++    if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00",
++                     IEEE80211_ADDR_LEN)) {
++        keyUsage = GROUP_USAGE;
++        A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik,
++                 sizeof(struct ieee80211req_key));
++    } else {
++        keyUsage = PAIRWISE_USAGE;
++        A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik,
++                 sizeof(struct ieee80211req_key));
++    }
++
++    switch (ik->ik_type) {
++        case IEEE80211_CIPHER_WEP:
++            keyType = WEP_CRYPT;
++            break;
++        case IEEE80211_CIPHER_TKIP:
++            keyType = TKIP_CRYPT;
++            break;
++        case IEEE80211_CIPHER_AES_CCM:
++            keyType = AES_CRYPT;
++            break;
++        default:
++            break;
++    }
++    ar->user_saved_keys.keyType = keyType;
++
++    if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) {
++        if (NONE_CRYPT == keyType) {
++            return -EIO;
++        }
++
++        status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage,
++                                ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
++                                ik->ik_keydata, KEY_OP_INIT_VAL,
++                                SYNC_BEFORE_WMIFLAG);
++
++        if (status != A_OK) {
++            return -EIO;
++        }
++    } else {
++        status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata);
++    }
++
++    ar->user_saved_keys.keyOk = TRUE;
++
++    return 0;
++}
++
++
++/*
++ * SIOCGIWNAME
++ */
++int
++ar6000_ioctl_giwname(struct net_device *dev,
++           struct iw_request_info *info,
++           char *name, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (ar->arPhyCapability) {
++    case (WMI_11A_CAPABILITY):
++        strncpy(name, "AR6000 802.11a", IFNAMSIZ);
++        break;
++    case (WMI_11G_CAPABILITY):
++        strncpy(name, "AR6000 802.11g", IFNAMSIZ);
++        break;
++    case (WMI_11AG_CAPABILITY):
++        strncpy(name, "AR6000 802.11ag", IFNAMSIZ);
++        break;
++    default:
++        strncpy(name, "AR6000 802.11", IFNAMSIZ);
++        break;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCSIWFREQ
++ */
++int
++ar6000_ioctl_siwfreq(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_freq *freq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    /*
++     * We support limiting the channels via wmiconfig.
++     *
++     * We use this command to configure the channel hint for the connect cmd
++     * so it is possible the target will end up connecting to a different
++     * channel.
++     */
++    if (freq->e > 1) {
++        return -EINVAL;
++    } else if (freq->e == 1) {
++        ar->arChannelHint = freq->m / 100000;
++    } else {
++        ar->arChannelHint = wlan_ieee2freq(freq->m);
++    }
++
++    A_PRINTF("channel hint set to %d\n", ar->arChannelHint);
++    return 0;
++}
++
++/*
++ * SIOCGIWFREQ
++ */
++int
++ar6000_ioctl_giwfreq(struct net_device *dev,
++                struct iw_request_info *info,
++                struct iw_freq *freq, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arConnected != TRUE) {
++        return -EINVAL;
++    }
++
++    freq->m = ar->arBssChannel * 100000;
++    freq->e = 1;
++
++    return 0;
++}
++
++/*
++ * SIOCSIWMODE
++ */
++int
++ar6000_ioctl_siwmode(struct net_device *dev,
++            struct iw_request_info *info,
++            __u32 *mode, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (*mode) {
++    case IW_MODE_INFRA:
++        ar->arNetworkType = INFRA_NETWORK;
++        break;
++    case IW_MODE_ADHOC:
++        ar->arNetworkType = ADHOC_NETWORK;
++        break;
++    default:
++        return -EINVAL;
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCGIWMODE
++ */
++int
++ar6000_ioctl_giwmode(struct net_device *dev,
++            struct iw_request_info *info,
++            __u32 *mode, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    switch (ar->arNetworkType) {
++    case INFRA_NETWORK:
++        *mode = IW_MODE_INFRA;
++        break;
++    case ADHOC_NETWORK:
++        *mode = IW_MODE_ADHOC;
++        break;
++    default:
++        return -EIO;
++    }
++    return 0;
++}
++
++/*
++ * SIOCSIWSENS
++ */
++int
++ar6000_ioctl_siwsens(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *sens, char *extra)
++{
++    return 0;
++}
++
++/*
++ * SIOCGIWSENS
++ */
++int
++ar6000_ioctl_giwsens(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_param *sens, char *extra)
++{
++    sens->value = 0;
++    sens->fixed = 1;
++
++    return 0;
++}
++
++/*
++ * SIOCGIWRANGE
++ */
++int
++ar6000_ioctl_giwrange(struct net_device *dev,
++             struct iw_request_info *info,
++             struct iw_point *data, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    struct iw_range *range = (struct iw_range *) extra;
++    int i, ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (down_interruptible(&ar->arSem)) {
++        return -ERESTARTSYS;
++    }
++    ar->arNumChannels = -1;
++    A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList));
++
++    if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) {
++        up(&ar->arSem);
++        return -EIO;
++    }
++
++    wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ);
++
++    if (signal_pending(current)) {
++        up(&ar->arSem);
++        return -EINTR;
++    }
++
++    data->length = sizeof(struct iw_range);
++    A_MEMZERO(range, sizeof(struct iw_range));
++
++    range->txpower_capa = IW_TXPOW_DBM;
++
++    range->min_pmp = 1 * 1024;
++    range->max_pmp = 65535 * 1024;
++    range->min_pmt = 1 * 1024;
++    range->max_pmt = 1000 * 1024;
++    range->pmp_flags = IW_POWER_PERIOD;
++    range->pmt_flags = IW_POWER_TIMEOUT;
++    range->pm_capa = 0;
++
++    range->we_version_compiled = WIRELESS_EXT;
++    range->we_version_source = 13;
++
++    range->retry_capa = IW_RETRY_LIMIT;
++    range->retry_flags = IW_RETRY_LIMIT;
++    range->min_retry = 0;
++    range->max_retry = 255;
++
++    range->num_frequency = range->num_channels = ar->arNumChannels;
++    for (i = 0; i < ar->arNumChannels; i++) {
++        range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]);
++        range->freq[i].m = ar->arChannelList[i] * 100000;
++        range->freq[i].e = 1;
++         /*
++         * Linux supports max of 32 channels, bail out once you
++         * reach the max.
++         */
++        if (i == IW_MAX_FREQUENCIES) {
++            break;
++        }
++    }
++
++    /* Max quality is max field value minus noise floor */
++    range->max_qual.qual  = 0xff - 161;
++
++    /*
++     * In order to use dBm measurements, 'level' must be lower
++     * than any possible measurement (see iw_print_stats() in
++     * wireless tools).  It's unclear how this is meant to be
++     * done, but setting zero in these values forces dBm and
++     * the actual numbers are not used.
++     */
++    range->max_qual.level = 0;
++    range->max_qual.noise = 0;
++
++    range->sensitivity = 3;
++
++    range->max_encoding_tokens = 4;
++    /* XXX query driver to find out supported key sizes */
++    range->num_encoding_sizes = 3;
++    range->encoding_size[0] = 5;        /* 40-bit */
++    range->encoding_size[1] = 13;       /* 104-bit */
++    range->encoding_size[2] = 16;       /* 128-bit */
++
++    range->num_bitrates = 0;
++
++    /* estimated maximum TCP throughput values (bps) */
++    range->throughput = 22000000;
++
++    range->min_rts = 0;
++    range->max_rts = 2347;
++    range->min_frag = 256;
++    range->max_frag = 2346;
++
++    up(&ar->arSem);
++
++    return ret;
++}
++
++
++/*
++ * SIOCSIWAP
++ * This ioctl is used to set the desired bssid for the connect command.
++ */
++int
++ar6000_ioctl_siwap(struct net_device *dev,
++              struct iw_request_info *info,
++              struct sockaddr *ap_addr, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ap_addr->sa_family != ARPHRD_ETHER) {
++        return -EIO;
++    }
++
++    if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) {
++        A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
++    } else {
++        A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data,  sizeof(ar->arReqBssid));
++    }
++
++    return 0;
++}
++
++/*
++ * SIOCGIWAP
++ */
++int
++ar6000_ioctl_giwap(struct net_device *dev,
++              struct iw_request_info *info,
++              struct sockaddr *ap_addr, char *extra)
++{
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    if (ar->arConnected != TRUE) {
++        return -EINVAL;
++    }
++
++    A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid));
++    ap_addr->sa_family = ARPHRD_ETHER;
++
++    return 0;
++}
++
++/*
++ * SIOCGIWAPLIST
++ */
++int
++ar6000_ioctl_iwaplist(struct net_device *dev,
++            struct iw_request_info *info,
++            struct iw_point *data, char *extra)
++{
++    return -EIO;            /* for now */
++}
++
++/*
++ * SIOCSIWSCAN
++ */
++int
++ar6000_ioctl_siwscan(struct net_device *dev,
++                     struct iw_request_info *info,
++                     struct iw_point *data, char *extra)
++{
++#define ACT_DWELLTIME_DEFAULT   105
++#define HOME_TXDRAIN_TIME       100
++#define SCAN_INT                HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT
++    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
++    int ret = 0;
++
++    if (ar->arWmiReady == FALSE) {
++        return -EIO;
++    }
++
++    if (ar->arWlanState == WLAN_DISABLED) {
++        return -EIO;
++    }
++
++    /* We ask for everything from the target */
++    if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
++          printk("Couldn't set filtering\n");
++          ret = -EIO;
++    }
++
++    if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \
++                          HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) {
++        ret = -EIO;
++    }
++
++    ar->scan_complete = 0;
++    wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete,
++                                   5 * HZ);
++
++    if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) {
++          printk("Couldn't set filtering\n");
++          ret = -EIO;
++    }
++
++    return ret;
++#undef  ACT_DWELLTIME_DEFAULT
++#undef HOME_TXDRAIN_TIME
++#undef SCAN_INT
++}
++
++
++/*
++ * Units are in db above the noise floor. That means the
++ * rssi values reported in the tx/rx descriptors in the
++ * driver are the SNR expressed in db.
++ *
++ * If you assume that the noise floor is -95, which is an
++ * excellent assumption 99.5 % of the time, then you can
++ * derive the absolute signal level (i.e. -95 + rssi).
++ * There are some other slight factors to take into account
++ * depending on whether the rssi measurement is from 11b,
++ * 11g, or 11a.   These differences are at most 2db and
++ * can be documented.
++ *
++ * NB: various calculations are based on the orinoco/wavelan
++ *     drivers for compatibility
++ */
++static void
++ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi)
++{
++    if (rssi < 0) {
++        iq->qual = 0;
++    } else {
++        iq->qual = rssi;
++    }
++
++    /* NB: max is 94 because noise is hardcoded to 161 */
++    if (iq->qual > 94)
++        iq->qual = 94;
++
++    iq->noise = 161;        /* -95dBm */
++    iq->level = iq->noise + iq->qual;
++    iq->updated = 7;
++}
++
++
++/* Structures to export the Wireless Handlers */
++static const iw_handler ath_handlers[] = {
++    (iw_handler) NULL,                          /* SIOCSIWCOMMIT */
++    (iw_handler) ar6000_ioctl_giwname,          /* SIOCGIWNAME */
++    (iw_handler) NULL,                          /* SIOCSIWNWID */
++    (iw_handler) NULL,                          /* SIOCGIWNWID */
++    (iw_handler) ar6000_ioctl_siwfreq,          /* SIOCSIWFREQ */
++    (iw_handler) ar6000_ioctl_giwfreq,          /* SIOCGIWFREQ */
++    (iw_handler) ar6000_ioctl_siwmode,          /* SIOCSIWMODE */
++    (iw_handler) ar6000_ioctl_giwmode,          /* SIOCGIWMODE */
++    (iw_handler) ar6000_ioctl_siwsens,          /* SIOCSIWSENS */
++    (iw_handler) ar6000_ioctl_giwsens,          /* SIOCGIWSENS */
++    (iw_handler) NULL /* not _used */,          /* SIOCSIWRANGE */
++    (iw_handler) ar6000_ioctl_giwrange,         /* SIOCGIWRANGE */
++    (iw_handler) NULL /* not used */,           /* SIOCSIWPRIV */
++    (iw_handler) NULL /* kernel code */,        /* SIOCGIWPRIV */
++    (iw_handler) NULL /* not used */,           /* SIOCSIWSTATS */
++    (iw_handler) NULL /* kernel code */,        /* SIOCGIWSTATS */
++    (iw_handler) NULL,                          /* SIOCSIWSPY */
++    (iw_handler) NULL,                          /* SIOCGIWSPY */
++    (iw_handler) NULL,                          /* SIOCSIWTHRSPY */
++    (iw_handler) NULL,                          /* SIOCGIWTHRSPY */
++    (iw_handler) ar6000_ioctl_siwap,            /* SIOCSIWAP */
++    (iw_handler) ar6000_ioctl_giwap,            /* SIOCGIWAP */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) ar6000_ioctl_iwaplist,         /* SIOCGIWAPLIST */
++    (iw_handler) ar6000_ioctl_siwscan,          /* SIOCSIWSCAN */
++    (iw_handler) ar6000_ioctl_giwscan,          /* SIOCGIWSCAN */
++    (iw_handler) ar6000_ioctl_siwessid,         /* SIOCSIWESSID */
++    (iw_handler) ar6000_ioctl_giwessid,         /* SIOCGIWESSID */
++    (iw_handler) NULL,                          /* SIOCSIWNICKN */
++    (iw_handler) NULL,                          /* SIOCGIWNICKN */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) NULL,                          /* -- hole -- */
++    (iw_handler) ar6000_ioctl_siwrate,          /* SIOCSIWRATE */
++    (iw_handler) ar6000_ioctl_giwrate,          /* SIOCGIWRATE */
++    (iw_handler) NULL,           /* SIOCSIWRTS */
++    (iw_handler) NULL,           /* SIOCGIWRTS */
++    (iw_handler) NULL,          /* SIOCSIWFRAG */
++    (iw_handler) NULL,          /* SIOCGIWFRAG */
++    (iw_handler) ar6000_ioctl_siwtxpow,         /* SIOCSIWTXPOW */
++    (iw_handler) ar6000_ioctl_giwtxpow,         /* SIOCGIWTXPOW */
++    (iw_handler) ar6000_ioctl_siwretry,         /* SIOCSIWRETRY */
++    (iw_handler) ar6000_ioctl_giwretry,         /* SIOCGIWRETRY */
++    (iw_handler) ar6000_ioctl_siwencode,        /* SIOCSIWENCODE */
++    (iw_handler) ar6000_ioctl_giwencode,        /* SIOCGIWENCODE */
++    (iw_handler) ar6000_ioctl_siwpower,         /* SIOCSIWPOWER */
++    (iw_handler) ar6000_ioctl_giwpower,         /* SIOCGIWPOWER */
++    (iw_handler) NULL,        /* -- hole -- */
++    (iw_handler) NULL,        /* -- hole -- */
++    (iw_handler) ar6000_ioctl_siwgenie,       /* SIOCSIWGENIE */
++    (iw_handler) ar6000_ioctl_giwgenie,       /* SIOCGIWGENIE */
++    (iw_handler) ar6000_ioctl_siwauth,        /* SIOCSIWAUTH */
++    (iw_handler) ar6000_ioctl_giwauth,        /* SIOCGIWAUTH */
++    (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */
++    (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */
++    (iw_handler) NULL,                /* SIOCSIWPMKSA */
++};
++
++static const iw_handler ath_priv_handlers[] = {
++    (iw_handler) ar6000_ioctl_setparam,         /* SIOCWFIRSTPRIV+0 */
++    (iw_handler) ar6000_ioctl_getparam,         /* SIOCWFIRSTPRIV+1 */
++    (iw_handler) ar6000_ioctl_setkey,           /* SIOCWFIRSTPRIV+2 */
++    (iw_handler) ar6000_ioctl_setwmmparams,     /* SIOCWFIRSTPRIV+3 */
++    (iw_handler) ar6000_ioctl_delkey,           /* SIOCWFIRSTPRIV+4 */
++    (iw_handler) ar6000_ioctl_getwmmparams,     /* SIOCWFIRSTPRIV+5 */
++    (iw_handler) ar6000_ioctl_setoptie,         /* SIOCWFIRSTPRIV+6 */
++    (iw_handler) ar6000_ioctl_setmlme,          /* SIOCWFIRSTPRIV+7 */
++    (iw_handler) ar6000_ioctl_addpmkid,         /* SIOCWFIRSTPRIV+8 */
++};
++
++#define IW_PRIV_TYPE_KEY \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key))
++#define IW_PRIV_TYPE_DELKEY \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key))
++#define IW_PRIV_TYPE_MLME \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme))
++#define IW_PRIV_TYPE_ADDPMKID \
++    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid))
++
++static const struct iw_priv_args ar6000_priv_args[] = {
++    { IEEE80211_IOCTL_SETKEY,
++      IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0,       "setkey"},
++    { IEEE80211_IOCTL_DELKEY,
++      IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0,    "delkey"},
++    { IEEE80211_IOCTL_SETPARAM,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0,   "setparam"},
++    { IEEE80211_IOCTL_GETPARAM,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getparam"},
++    { IEEE80211_IOCTL_SETWMMPARAMS,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0,   "setwmmparams"},
++    { IEEE80211_IOCTL_GETWMMPARAMS,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
++      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getwmmparams"},
++    { IEEE80211_IOCTL_SETOPTIE,
++      IW_PRIV_TYPE_BYTE, 0,       "setie"},
++    { IEEE80211_IOCTL_SETMLME,
++      IW_PRIV_TYPE_MLME, 0,       "setmlme"},
++    { IEEE80211_IOCTL_ADDPMKID,
++      IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0,  "addpmkid"},
++};
++
++void ar6000_ioctl_iwsetup(struct iw_handler_def *def)
++{
++    def->private_args = (struct iw_priv_args *)ar6000_priv_args;
++    def->num_private_args = ARRAY_SIZE(ar6000_priv_args);
++}
++
++struct iw_handler_def ath_iw_handler_def = {
++    .standard         = (iw_handler *)ath_handlers,
++    .num_standard     = ARRAY_SIZE(ath_handlers),
++    .private          = (iw_handler *)ath_priv_handlers,
++    .num_private      = ARRAY_SIZE(ath_priv_handlers),
++};
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/bmi/bmi.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/bmi/bmi.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/bmi/bmi.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/bmi/bmi.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,657 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "hif.h"
++#include "bmi.h"
++#include "htc_api.h"
++#include "bmi_internal.h"
++
++/*
++Although we had envisioned BMI to run on top of HTC, this is not what the
++final implementation boiled down to on dragon. Its a part of BSP and does
++not use the HTC protocol either. On the host side, however, we were still
++living with the original idea. I think the time has come to accept the truth
++and separate it from HTC which has been carrying BMI's burden all this while.
++It shall make HTC state machine relatively simpler
++*/
++
++/* APIs visible to the driver */
++void
++BMIInit(void)
++{
++    bmiDone = FALSE;
++}
++
++A_STATUS
++BMIDone(HIF_DEVICE *device)
++{
++    A_STATUS status;
++    A_UINT32 cid;
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
++        return A_OK;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device));
++    bmiDone = TRUE;
++    cid = BMI_DONE;
++
++    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
++{
++    A_STATUS status;
++    A_UINT32 cid;
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
++    cid = BMI_GET_TARGET_INFO;
++
++    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
++                                                sizeof(targ_info->target_ver));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
++        return A_ERROR;
++    }
++
++    if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
++        /* Determine how many bytes are in the Target's targ_info */
++        status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
++                                            sizeof(targ_info->target_info_byte_count));
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
++            return A_ERROR;
++        }
++
++        /*
++         * The Target's targ_info doesn't match the Host's targ_info.
++         * We need to do some backwards compatibility work to make this OK.
++         */
++        A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
++
++        /* Read the remainder of the targ_info */
++        status = bmiBufferReceive(device,
++                        ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
++                        sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count));
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
++                                                              targ_info->target_info_byte_count));
++            return A_ERROR;
++        }
++    } else {
++        /*
++         * Target must be an AR6001 whose firmware does not
++         * support BMI_GET_TARGET_INFO.  Construct the data
++         * that it would have sent.
++         */
++        targ_info->target_info_byte_count = sizeof(targ_info);
++        targ_info->target_type = TARGET_TYPE_AR6001;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
++                                                              targ_info->target_ver, targ_info->target_type));
++    printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
++         targ_info->target_ver, targ_info->target_type);
++
++    return A_OK;
++}
++
++A_STATUS
++BMIReadMemory(HIF_DEVICE *device,
++              A_UINT32 address,
++              A_UCHAR *buffer,
++              A_UINT32 length)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    A_UINT32 remaining, rxlen;
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
++    memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++                              ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
++                              device, address, length));
++
++    cid = BMI_READ_MEMORY;
++
++    remaining = length;
++
++    while (remaining)
++    {
++        rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX;
++        offset = 0;
++        A_MEMCPY(&data[offset], &cid, sizeof(cid));
++        offset += sizeof(cid);
++        A_MEMCPY(&data[offset], &address, sizeof(address));
++        offset += sizeof(address);
++        A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen));
++        offset += sizeof(length);
++
++        status = bmiBufferSend(device, data, offset);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++            return A_ERROR;
++        }
++        status = bmiBufferReceive(device, data, rxlen);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++            return A_ERROR;
++        }
++        A_MEMCPY(&buffer[length - remaining], data, rxlen);
++        remaining -= rxlen; address += rxlen;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIWriteMemory(HIF_DEVICE *device,
++               A_UINT32 address,
++               A_UCHAR *buffer,
++               A_UINT32 length)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    A_UINT32 remaining, txlen;
++    const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length);
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
++      memset (&data, 0, header);
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
++         device, address, length));
++
++    cid = BMI_WRITE_MEMORY;
++
++    remaining = length;
++    while (remaining)
++    {
++        txlen = (remaining < (BMI_DATASZ_MAX - header)) ?
++                                       remaining : (BMI_DATASZ_MAX - header);
++        offset = 0;
++        A_MEMCPY(&data[offset], &cid, sizeof(cid));
++        offset += sizeof(cid);
++        A_MEMCPY(&data[offset], &address, sizeof(address));
++        offset += sizeof(address);
++        A_MEMCPY(&data[offset], &txlen, sizeof(txlen));
++        offset += sizeof(txlen);
++        A_MEMCPY(&data[offset], &buffer[length - remaining], txlen);
++        offset += txlen;
++        status = bmiBufferSend(device, data, offset);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++            return A_ERROR;
++        }
++        remaining -= txlen; address += txlen;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIExecute(HIF_DEVICE *device,
++           A_UINT32 address,
++           A_UINT32 *param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)];
++    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
++        device, address, *param));
++
++    cid = BMI_EXECUTE;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    A_MEMCPY(&data[offset], param, sizeof(*param));
++    offset += sizeof(*param);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, data, sizeof(*param));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++
++    A_MEMCPY(param, data, sizeof(*param));
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param));
++    return A_OK;
++}
++
++A_STATUS
++BMISetAppStart(HIF_DEVICE *device,
++               A_UINT32 address)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address)];
++    memset (&data, 0, sizeof(cid) + sizeof(address));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n",
++        device, address));
++
++    cid = BMI_SET_APP_START;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIReadSOCRegister(HIF_DEVICE *device,
++                   A_UINT32 address,
++                   A_UINT32 *param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address)];
++    memset (&data, 0, sizeof(cid) + sizeof(address));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++       ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n",
++       device, address));
++
++    cid = BMI_READ_SOC_REGISTER;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, data, sizeof(*param));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++    A_MEMCPY(param, data, sizeof(*param));
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param));
++    return A_OK;
++}
++
++A_STATUS
++BMIWriteSOCRegister(HIF_DEVICE *device,
++                    A_UINT32 address,
++                    A_UINT32 param)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)];
++
++    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++     ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
++     device, address, param));
++
++    cid = BMI_WRITE_SOC_REGISTER;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &address, sizeof(address));
++    offset += sizeof(address);
++    A_MEMCPY(&data[offset], &param, sizeof(param));
++    offset += sizeof(param);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n"));
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchInstall(HIF_DEVICE *device,
++                   A_UINT32 ROM_addr,
++                   A_UINT32 RAM_addr,
++                   A_UINT32 nbytes,
++                   A_UINT32 do_activate,
++                   A_UINT32 *rompatch_id)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
++                                sizeof(nbytes) + sizeof(do_activate)];
++
++      memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
++                      sizeof(nbytes) + sizeof(do_activate));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n",
++         device, ROM_addr, RAM_addr, nbytes, do_activate));
++
++    cid = BMI_ROMPATCH_INSTALL;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr));
++    offset += sizeof(ROM_addr);
++    A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr));
++    offset += sizeof(RAM_addr);
++    A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes));
++    offset += sizeof(nbytes);
++    A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate));
++    offset += sizeof(do_activate);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id));
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id));
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchUninstall(HIF_DEVICE *device,
++                     A_UINT32 rompatch_id)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)];
++    memset (&data, 0, sizeof(cid) + sizeof(rompatch_id));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n",
++                                                                       device, rompatch_id));
++
++    cid = BMI_ROMPATCH_UNINSTALL;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id));
++    offset += sizeof(rompatch_id);
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id));
++    return A_OK;
++}
++
++static A_STATUS
++_BMIrompatchChangeActivation(HIF_DEVICE *device,
++                             A_UINT32 rompatch_count,
++                             A_UINT32 *rompatch_list,
++                             A_UINT32 do_activate)
++{
++    A_UINT32 cid;
++    A_STATUS status;
++    A_UINT32 offset;
++    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)];
++    A_UINT32 length;
++
++      memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count));
++
++    if (bmiDone) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
++         ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n",
++           device, rompatch_count));
++
++    cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE;
++
++    offset = 0;
++    A_MEMCPY(&data[offset], &cid, sizeof(cid));
++    offset += sizeof(cid);
++    A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count));
++    offset += sizeof(rompatch_count);
++    length = rompatch_count * sizeof(*rompatch_list);
++    A_MEMCPY(&data[offset], rompatch_list, length);
++    offset += length;
++    status = bmiBufferSend(device, data, offset);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
++        return A_ERROR;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n"));
++
++    return A_OK;
++}
++
++A_STATUS
++BMIrompatchActivate(HIF_DEVICE *device,
++                    A_UINT32 rompatch_count,
++                    A_UINT32 *rompatch_list)
++{
++    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1);
++}
++
++A_STATUS
++BMIrompatchDeactivate(HIF_DEVICE *device,
++                      A_UINT32 rompatch_count,
++                      A_UINT32 *rompatch_list)
++{
++    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0);
++}
++
++/* BMI Access routines */
++A_STATUS
++bmiBufferSend(HIF_DEVICE *device,
++              A_UCHAR *buffer,
++              A_UINT32 length)
++{
++    A_STATUS status;
++    A_UINT32 timeout;
++    A_UINT32 address;
++    static A_UINT32 cmdCredits;
++    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
++
++    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
++                       &mboxAddress, sizeof(mboxAddress));
++
++    cmdCredits = 0;
++    timeout = BMI_COMMUNICATION_TIMEOUT;
++
++    while(timeout-- && !cmdCredits) {
++        /* Read the counter register to get the command credits */
++        address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
++        /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause
++         * a decrement, while the remaining 3 bytes has no effect.  The rationale behind this is to
++         * make all HIF accesses 4-byte aligned */
++        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4,
++            HIF_RD_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
++            return A_ERROR;
++        }
++        /* the counter is only 8=bits, ignore anything in the upper 3 bytes */
++        cmdCredits &= 0xFF;
++    }
++
++    if (cmdCredits) {
++        address = mboxAddress[ENDPOINT1];
++        status = HIFReadWrite(device, address, buffer, length,
++            HIF_WR_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
++            return A_ERROR;
++        }
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n"));
++        return A_ERROR;
++    }
++
++    return status;
++}
++
++A_STATUS
++bmiBufferReceive(HIF_DEVICE *device,
++                 A_UCHAR *buffer,
++                 A_UINT32 length)
++{
++    A_STATUS status;
++    A_UINT32 address;
++    A_UINT32 timeout;
++    static A_UINT32 cmdCredits;
++    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
++
++    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
++                       &mboxAddress, sizeof(mboxAddress));
++
++    cmdCredits = 0;
++    timeout = BMI_COMMUNICATION_TIMEOUT;
++    while(timeout-- && !cmdCredits) {
++        /* Read the counter register to get the command credits */
++        address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1;
++        /* read the counter using a 4-byte read.  Since the counter is NOT auto-decrementing,
++         * we can read this counter multiple times using a non-incrementing address mode.
++         * The rationale here is to make all HIF accesses a multiple of 4 bytes */
++        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits),
++            HIF_RD_SYNC_BYTE_FIX, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
++            return A_ERROR;
++        }
++            /* we did a 4-byte read to the same count register so mask off upper bytes */
++        cmdCredits &= 0xFF;
++        status = A_ERROR;
++    }
++
++    if (cmdCredits) {
++        address = mboxAddress[ENDPOINT1];
++        status = HIFReadWrite(device, address, buffer, length,
++            HIF_RD_SYNC_BYTE_INC, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
++            return A_ERROR;
++        }
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n"));
++        return A_ERROR;
++    }
++
++    return status;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/bmi/bmi_internal.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/bmi/bmi_internal.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/bmi/bmi_internal.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/bmi/bmi_internal.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,45 @@
++#ifndef BMI_INTERNAL_H
++#define BMI_INTERNAL_H
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "AR6Khwreg.h"
++#include "bmi_msg.h"
++
++#define BMI_COMMUNICATION_TIMEOUT       100000
++
++/* ------ Global Variable Declarations ------- */
++A_BOOL bmiDone;
++
++A_STATUS
++bmiBufferSend(HIF_DEVICE *device,
++              A_UCHAR *buffer,
++              A_UINT32 length);
++
++A_STATUS
++bmiBufferReceive(HIF_DEVICE *device,
++                 A_UCHAR *buffer,
++                 A_UINT32 length);
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif2.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif2.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif2.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif2.c 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,768 @@
++/*
++ * hif2.c - HIF layer re-implementation for the Linux SDIO stack
++ *
++ * Copyright (C) 2008, 2009 by OpenMoko, Inc.
++ * Written by Werner Almesberger <werner@openmoko.org>
++ * All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * Based on:
++ *
++ * @abstract: HIF layer reference implementation for Atheros SDIO stack
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/kthread.h>
++#include <linux/list.h>
++#include <linux/wait.h>
++#include <linux/spinlock.h>
++#include <linux/mutex.h>
++#include <linux/sched.h>
++#include <linux/mmc/sdio_func.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_ids.h>
++
++#include "athdefs.h"
++#include "a_types.h"
++#include "hif.h"
++
++
++/* @@@ Hack - this wants cleaning up */
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++
++#include <mach/gta02-pm-wlan.h>
++
++#else /* CONFIG_MACH_NEO1973_GTA02 */
++
++#define       gta02_wlan_query_rfkill_lock()  1
++#define       gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb)
++#define       gta02_wlan_query_rfkill_unlock()
++#define       gta02_wlan_clear_rfkill_cb()
++
++#endif /* !CONFIG_MACH_NEO1973_GTA02 */
++
++
++/*
++ * KNOWN BUGS:
++ *
++ * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors)
++ * - latency can reach hundreds of ms, probably because of scheduling delays
++ * - packets go through about three queues before finally hitting the network
++ */
++
++/*
++ * Differences from Atheros' HIFs:
++ *
++ * - synchronous and asynchronous requests may get reordered with respect to
++ *   each other, e.g., if HIFReadWrite returns for an asynchronous request and
++ *   then HIFReadWrite is called for a synchronous request, the synchronous
++ *   request may be executed before the asynchronous request.
++ *
++ * - request queue locking seems unnecessarily complex in the Atheros HIFs.
++ *
++ * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which
++ *   can cause quite a bit of overhead. This HIF has its own light-weight
++ *   interrupt masking.
++ *
++ * - Atheros call deviceInsertedHandler from a thread spawned off the probe or
++ *   device insertion function. The original explanation for the Atheros SDIO
++ *   stack said that this is done because a delay is needed to let the chip
++ *   complete initialization. There is indeed a one second delay in the thread.
++ *
++ *   The Atheros Linux SDIO HIF removes the delay and only retains the thread.
++ *   Experimentally removing the thread didn't show any conflicts, so let's get
++ *   rid of it for good.
++ *
++ * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in
++ *   SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't
++ *   either, and this seems to work fine.
++ *   @@@ Need to check this with Atheros.
++ */
++
++
++#define MBOXES                        4
++
++#define HIF_MBOX_BLOCK_SIZE   128
++#define       HIF_MBOX_BASE_ADDR      0x800
++#define       HIF_MBOX_WIDTH          0x800
++#define       HIF_MBOX_START_ADDR(mbox) \
++    (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH)
++
++
++struct hif_device {
++      void *htc_handle;
++      struct sdio_func *func;
++
++      /*
++       * @@@ our sweet little bit of bogosity - the mechanism that lets us
++       * use the SDIO stack from softirqs. This really wants to use skbs.
++       */
++      struct list_head queue;
++      spinlock_t queue_lock;
++      struct task_struct *io_task;
++      wait_queue_head_t wait;
++
++      /*
++       * activate_lock protects "active" and the activation/deactivation
++       * process itself.
++       *
++       * Relation to other locks: The SDIO function can be claimed while
++       * activate_lock is being held, but trying to acquire activate_lock
++       * while having ownership of the SDIO function could cause a deadlock.
++       */
++      int active;
++      struct mutex activate_lock;
++};
++
++struct hif_request {
++      struct list_head list;
++      struct sdio_func *func;
++      int (*read)(struct sdio_func *func,
++          void *dst, unsigned int addr, int count);
++      int (*write)(struct sdio_func *func,
++          unsigned int addr, void *src, int count);
++      void *buf;
++      unsigned long addr;
++      int len;
++      A_STATUS (*completion)(void *context, A_STATUS status);
++      void *context;
++};
++
++
++static HTC_CALLBACKS htcCallbacks;
++
++/*
++ * shutdown_lock prevents recursion through HIFShutDownDevice
++ */
++static DEFINE_MUTEX(shutdown_lock);
++
++
++/* ----- Request processing ------------------------------------------------ */
++
++
++static A_STATUS process_request(struct hif_request *req)
++{
++      int ret;
++      A_STATUS status;
++
++      dev_dbg(&req->func->dev, "process_request(req %p)\n", req);
++      sdio_claim_host(req->func);
++      if (req->read) {
++              ret = req->read(req->func, req->buf, req->addr, req->len);
++      } else {
++              ret = req->write(req->func, req->addr, req->buf, req->len);
++      }
++      sdio_release_host(req->func);
++      status = ret ? A_ERROR : A_OK;
++      if (req->completion)
++              req->completion(req->context, status);
++      kfree(req);
++      return status;
++}
++
++
++static void enqueue_request(struct hif_device *hif, struct hif_request *req)
++{
++      unsigned long flags;
++
++      dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req);
++      spin_lock_irqsave(&hif->queue_lock, flags);
++      list_add_tail(&req->list, &hif->queue);
++      spin_unlock_irqrestore(&hif->queue_lock, flags);
++      wake_up(&hif->wait);
++}
++
++
++static struct hif_request *dequeue_request(struct hif_device *hif)
++{
++      struct hif_request *req;
++      unsigned long flags;
++
++      spin_lock_irqsave(&hif->queue_lock, flags);
++      if (list_empty(&hif->queue))
++              req = NULL;
++      else {
++              req = list_first_entry(&hif->queue,
++                  struct hif_request, list);
++              list_del(&req->list);
++      }
++      spin_unlock_irqrestore(&hif->queue_lock, flags);
++      return req;
++}
++
++
++static void wait_queue_empty(struct hif_device *hif)
++{
++      unsigned long flags;
++      int empty;
++
++      while (1) {
++              spin_lock_irqsave(&hif->queue_lock, flags);
++              empty = list_empty(&hif->queue);
++              spin_unlock_irqrestore(&hif->queue_lock, flags);
++              if (empty)
++                      break;
++              else
++                      yield();
++      }
++}
++
++
++static int io(void *data)
++{
++      struct hif_device *hif = data;
++      struct sched_param param = { .sched_priority = 2 };
++              /* one priority level slower than ksdioirqd (which is at 1) */
++      DEFINE_WAIT(wait);
++      struct hif_request *req;
++
++      sched_setscheduler(current, SCHED_FIFO, &param);
++
++      while (1) {
++              while (1) {
++                      /*
++                       * Since we never use signals here, one might think
++                       * that this ought to be TASK_UNINTERRUPTIBLE. However,
++                       * such a task would increase the load average and,
++                       * worse, it would trigger the softlockup check.
++                       */
++                      prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE);
++                      if (kthread_should_stop()) {
++                              finish_wait(&hif->wait, &wait);
++                              return 0;
++                      }
++                      req = dequeue_request(hif);
++                      if (req)
++                              break;
++                      schedule();
++              }
++              finish_wait(&hif->wait, &wait);
++
++              (void) process_request(req);
++      }
++      return 0;
++}
++
++
++A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer,
++    A_UINT32 length, A_UINT32 request, void *context)
++{
++      struct device *dev = HIFGetOSDevice(hif);
++      struct hif_request *req;
++
++      dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, "
++          "length %d, request 0x%x, context %p)\n",
++          hif, address, buffer, length, request, context);
++
++      BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)));
++      BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)));
++      BUG_ON(!(request & (HIF_READ | HIF_WRITE)));
++      BUG_ON(!(request & HIF_EXTENDED_IO));
++
++      if (address >= HIF_MBOX_START_ADDR(0) &&
++          address < HIF_MBOX_START_ADDR(MBOXES+1)) {
++              BUG_ON(length > HIF_MBOX_WIDTH);
++              /* Adjust the address so that the last byte falls on the EOM
++                 address. */
++              address += HIF_MBOX_WIDTH-length;
++      }
++
++      req = kzalloc(sizeof(*req), GFP_ATOMIC);
++      if (!req) {
++              if (request & HIF_ASYNCHRONOUS)
++                      htcCallbacks.rwCompletionHandler(context, A_ERROR);
++              return A_ERROR;
++      }
++
++      req->func = hif->func;
++      req->addr = address;
++      req->buf = buffer;
++      req->len = length;
++
++      if (request & HIF_READ) {
++              if (request & HIF_FIXED_ADDRESS)
++                      req->read = sdio_readsb;
++              else
++                      req->read = sdio_memcpy_fromio;
++      } else {
++              if (request & HIF_FIXED_ADDRESS)
++                      req->write = sdio_writesb;
++              else
++                      req->write = sdio_memcpy_toio;
++      }
++
++      if (!(request & HIF_ASYNCHRONOUS))
++              return process_request(req);
++
++      req->completion = htcCallbacks.rwCompletionHandler;
++      req->context = context;
++      enqueue_request(hif, req);
++
++      return A_OK;
++}
++
++
++/* ----- Interrupt handling ------------------------------------------------ */
++
++/*
++ * Volatile ought to be good enough to make gcc do the right thing on S3C24xx.
++ * No need to use atomic or put barriers, keeping the code more readable.
++ *
++ * Warning: this story changes if going SMP/SMT.
++ */
++
++static volatile int masked = 1;
++static volatile int pending;
++static volatile int in_interrupt;
++
++
++static void ar6000_do_irq(struct sdio_func *func)
++{
++      HIF_DEVICE *hif = sdio_get_drvdata(func);
++      struct device *dev = HIFGetOSDevice(hif);
++      A_STATUS status;
++
++      dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler);
++
++      status = htcCallbacks.dsrHandler(hif->htc_handle);
++      BUG_ON(status != A_OK);
++}
++
++
++static void sdio_ar6000_irq(struct sdio_func *func)
++{
++      HIF_DEVICE *hif = sdio_get_drvdata(func);
++      struct device *dev = HIFGetOSDevice(hif);
++
++      dev_dbg(dev, "sdio_ar6000_irq\n");
++
++      in_interrupt = 1;
++      if (masked) {
++              in_interrupt = 0;
++              pending++;
++              return;
++      }
++      /*
++       * @@@ This is ugly. If we don't drop the lock, we'll deadlock when
++       * the handler tries to do SDIO. So there are four choices:
++       *
++       * 1) Break the call chain by calling the callback from a workqueue.
++       *    Ugh.
++       * 2) Make process_request aware that we already have the lock.
++       * 3) Drop the lock. Which is ugly but should be safe as long as we're
++       *    making sure the device doesn't go away.
++       * 4) Change the AR6k driver such that it only issues asynchronous
++       *    quests when called from an interrupt.
++       *
++       * Solution 2) is probably the best for now. Will try it later.
++       */
++      sdio_release_host(func);
++      ar6000_do_irq(func);
++      sdio_claim_host(func);
++      in_interrupt = 0;
++}
++
++
++void HIFAckInterrupt(HIF_DEVICE *hif)
++{
++      struct device *dev = HIFGetOSDevice(hif);
++
++      dev_dbg(dev, "HIFAckInterrupt\n");
++      /* do nothing */
++}
++
++
++void HIFUnMaskInterrupt(HIF_DEVICE *hif)
++{
++      struct device *dev = HIFGetOSDevice(hif);
++
++      dev_dbg(dev, "HIFUnMaskInterrupt\n");
++      do {
++              masked = 1;
++              if (pending) {
++                      pending = 0;
++                      ar6000_do_irq(hif->func);
++                      /* We may take an interrupt before unmasking and thus
++                         get it pending. In this case, we just loop back. */
++              }
++              masked = 0;
++      }
++      while (pending);
++}
++
++
++void HIFMaskInterrupt(HIF_DEVICE *hif)
++{
++      struct device *dev = HIFGetOSDevice(hif);
++
++      dev_dbg(dev, "HIFMaskInterrupt\n");
++      /*
++       * Since sdio_ar6000_irq can also be called from a process context, we
++       * may conceivably end up racing with it. Thus, we need to wait until
++       * we can be sure that no concurrent interrupt processing is going on
++       * before we return.
++       *
++       * Note: this may be a bit on the paranoid side - the callers may
++       * actually be nice enough to disable scheduling. Check later.
++       */
++      masked = 1;
++      while (in_interrupt)
++              yield();
++}
++
++
++/* ----- HIF API glue functions -------------------------------------------- */
++
++
++struct device *HIFGetOSDevice(HIF_DEVICE *hif)
++{
++      return &hif->func->dev;
++}
++
++
++void HIFSetHandle(void *hif_handle, void *handle)
++{
++      HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle;
++
++      hif->htc_handle = handle;
++}
++
++
++/* ----- Device configuration (HIF side) ----------------------------------- */
++
++
++A_STATUS HIFConfigureDevice(HIF_DEVICE *hif,
++    HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen)
++{
++      struct device *dev = HIFGetOSDevice(hif);
++      HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config;
++      A_UINT32 *mbs_cfg = config;
++      int i;
++
++      dev_dbg(dev, "HIFConfigureDevice\n");
++
++      switch (opcode) {
++      case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
++              for (i = 0; i != MBOXES; i++)
++                      mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE;
++              break;
++      case HIF_DEVICE_GET_MBOX_ADDR:
++              for (i = 0; i != MBOXES; i++)
++                      mbs_cfg[i] = HIF_MBOX_START_ADDR(i);
++              break;
++      case HIF_DEVICE_GET_IRQ_PROC_MODE:
++              *ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY;
++//            *ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC;
++              break;
++      default:
++              return A_ERROR;
++      }
++      return A_OK;
++}
++
++
++/* ----- Device probe and removal (Linux side) ----------------------------- */
++
++
++static int ar6000_do_activate(struct hif_device *hif)
++{
++      struct sdio_func *func = hif->func;
++      struct device *dev = &func->dev;
++      int ret;
++
++      dev_dbg(dev, "ar6000_do_activate\n");
++
++      sdio_claim_host(func);
++      sdio_enable_func(func);
++
++      INIT_LIST_HEAD(&hif->queue);
++      init_waitqueue_head(&hif->wait);
++      spin_lock_init(&hif->queue_lock);
++
++      ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
++      if (ret < 0) {
++              dev_err(dev, "sdio_set_block_size returns %d\n", ret);
++              goto out_enabled;
++      }
++      ret = sdio_claim_irq(func, sdio_ar6000_irq);
++      if (ret) {
++              dev_err(dev, "sdio_claim_irq returns %d\n", ret);
++              goto out_enabled;
++      }
++      /* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */
++#if 0
++      sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret);
++      if (ret) {
++              dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n",
++                  ret);
++              goto out_got_irq;
++      }
++#else
++      if (0) /* avoid warning */
++              goto out_got_irq;
++#endif
++
++      sdio_release_host(func);
++
++      hif->io_task = kthread_run(io, hif, "ar6000_io");
++      ret = IS_ERR(hif->io_task);
++      if (ret) {
++              dev_err(dev, "kthread_run(ar6000_io): %d\n", ret);
++              goto out_func_ready;
++      }
++
++      ret = htcCallbacks.deviceInsertedHandler(hif);
++      if (ret == A_OK)
++              return 0;
++
++      dev_err(dev, "deviceInsertedHandler: %d\n", ret);
++
++      ret = kthread_stop(hif->io_task);
++      if (ret)
++              dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
++
++out_func_ready:
++      sdio_claim_host(func);
++
++out_got_irq:
++      sdio_release_irq(func);
++
++out_enabled:
++      sdio_disable_func(func);
++      sdio_release_host(func);
++
++      return ret;
++}
++
++
++static void ar6000_do_deactivate(struct hif_device *hif)
++{
++      struct sdio_func *func = hif->func;
++      struct device *dev = &func->dev;
++      int ret;
++
++      dev_dbg(dev, "ar6000_do_deactivate\n");
++      if (!hif->active)
++              return;
++
++      if (mutex_trylock(&shutdown_lock)) {
++              /*
++               * Funny, Atheros' HIF does this call, but this just puts us in
++               * a recursion through HTCShutDown/HIFShutDown if unloading the
++               * module.
++               *
++               * However, we need it for suspend/resume. See the comment at
++               * HIFShutDown, below.
++               */
++              ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK);
++              if (ret != A_OK)
++                      dev_err(dev, "deviceRemovedHandler: %d\n", ret);
++              mutex_unlock(&shutdown_lock);
++      }
++      wait_queue_empty(hif);
++      ret = kthread_stop(hif->io_task);
++      if (ret)
++              dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
++      sdio_claim_host(func);
++      sdio_release_irq(func);
++      sdio_disable_func(func);
++      sdio_release_host(func);
++}
++
++
++static int ar6000_activate(struct hif_device *hif)
++{
++      int ret = 0;
++
++      dev_dbg(&hif->func->dev, "ar6000_activate\n");
++      mutex_lock(&hif->activate_lock);
++      if (!hif->active) {
++              ret = ar6000_do_activate(hif);
++              if (ret) {
++                      printk(KERN_ERR "%s: Failed to activate %d\n",
++                              __func__, ret);
++                      goto out;
++              }
++              hif->active = 1;
++      }
++out:
++      mutex_unlock(&hif->activate_lock);
++      return ret;
++}
++
++
++static void ar6000_deactivate(struct hif_device *hif)
++{
++      dev_dbg(&hif->func->dev, "ar6000_deactivate\n");
++      mutex_lock(&hif->activate_lock);
++      if (hif->active) {
++              ar6000_do_deactivate(hif);
++              hif->active = 0;
++      }
++      mutex_unlock(&hif->activate_lock);
++}
++
++
++static int ar6000_rfkill_cb(void *data, int on)
++{
++      struct hif_device *hif = data;
++      struct sdio_func *func = hif->func;
++      struct device *dev = &func->dev;
++
++      dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on);
++      if (on)
++              return ar6000_activate(hif);
++      ar6000_deactivate(hif);
++      return 0;
++}
++
++
++static int sdio_ar6000_probe(struct sdio_func *func,
++    const struct sdio_device_id *id)
++{
++      struct device *dev = &func->dev;
++      struct hif_device *hif;
++      int ret = 0;
++
++      dev_dbg(dev, "sdio_ar6000_probe\n");
++      BUG_ON(!htcCallbacks.deviceInsertedHandler);
++
++      hif = kzalloc(sizeof(*hif), GFP_KERNEL);
++      if (!hif)
++              return -ENOMEM;
++
++      sdio_set_drvdata(func, hif);
++      hif->func = func;
++      mutex_init(&hif->activate_lock);
++      hif->active = 0;
++
++      if (gta02_wlan_query_rfkill_lock())
++              ret = ar6000_activate(hif);
++      if (!ret) {
++              gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif);
++              return 0;
++      }
++      gta02_wlan_query_rfkill_unlock();
++      sdio_set_drvdata(func, NULL);
++      kfree(hif);
++      return ret;
++}
++
++
++static void sdio_ar6000_remove(struct sdio_func *func)
++{
++      struct device *dev = &func->dev;
++      HIF_DEVICE *hif = sdio_get_drvdata(func);
++
++      dev_dbg(dev, "sdio_ar6000_remove\n");
++      gta02_wlan_clear_rfkill_cb();
++      ar6000_deactivate(hif);
++      sdio_set_drvdata(func, NULL);
++      kfree(hif);
++}
++
++
++/* ----- Device registration/unregistration (called by HIF) ---------------- */
++
++
++#define ATHEROS_SDIO_DEVICE(id, offset) \
++    SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset))
++
++static const struct sdio_device_id sdio_ar6000_ids[] = {
++      { ATHEROS_SDIO_DEVICE(AR6002, 0)        },
++      { ATHEROS_SDIO_DEVICE(AR6002, 0x1)      },
++      { ATHEROS_SDIO_DEVICE(AR6001, 0x8)      },
++      { ATHEROS_SDIO_DEVICE(AR6001, 0x9)      },
++      { ATHEROS_SDIO_DEVICE(AR6001, 0xa)      },
++      { ATHEROS_SDIO_DEVICE(AR6001, 0xb)      },
++      { /* end: all zeroes */                 },
++};
++
++MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids);
++
++
++static struct sdio_driver sdio_ar6000_driver = {
++      .probe          = sdio_ar6000_probe,
++      .remove         = sdio_ar6000_remove,
++      .name           = "sdio_ar6000",
++      .id_table       = sdio_ar6000_ids,
++};
++
++
++int HIFInit(HTC_CALLBACKS *callbacks)
++{
++      int ret;
++
++      BUG_ON(!callbacks);
++
++      printk(KERN_DEBUG "HIFInit\n");
++      htcCallbacks = *callbacks;
++
++      ret = sdio_register_driver(&sdio_ar6000_driver);
++      if (ret) {
++              printk(KERN_ERR
++                  "sdio_register_driver(sdio_ar6000_driver): %d\n", ret);
++              return A_ERROR;
++      }
++
++      return 0;
++}
++
++
++/*
++ * We have four possible call chains here:
++ *
++ * System shutdown/reboot:
++ *
++ *   kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown ->
++ *     mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove ->
++ *     ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   This is roughly the same sequence as suspend, described below.
++ *
++ * Module removal:
++ *
++ *   sys_delete_module -> ar6000_cleanup_module -> HTCShutDown ->
++ *     HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove ->
++ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate
++ *
++ *   In this case, HIFShutDownDevice must call sdio_unregister_driver to
++ *   notify the driver about its removal. ar6000_do_deactivate must not call
++ *   deviceRemovedHandler, because that would loop back into HIFShutDownDevice.
++ *
++ * Suspend:
++ *
++ *   device_suspend ...> s3cmci_suspend ...> sdio_bus_remove ->
++ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   We must call deviceRemovedHandler to inform the ar6k stack that the device
++ *   has been removed. Since HTCTargetRemovedHandler calls back into
++ *   HIFShutDownDevice, we must also prevent the call to
++ *   sdio_unregister_driver, or we'd end up recursing into the SDIO stack,
++ *   eventually deadlocking somewhere.
++ *
++ * rfkill:
++ *
++ *   rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio ->
++ *   ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate ->
++ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
++ *
++ *   This is similar to suspend - only the entry point changes.
++ */
++
++void HIFShutDownDevice(HIF_DEVICE *hif)
++{
++      /* Beware, HTCShutDown calls us with hif == NULL ! */
++      if (mutex_trylock(&shutdown_lock)) {
++              sdio_unregister_driver(&sdio_ar6000_driver);
++              mutex_unlock(&shutdown_lock);
++      }
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,824 @@
++/*
++ * @file: hif.c
++ *
++ * @abstract: HIF layer reference implementation for Atheros SDIO stack
++ *
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "hif_internal.h"
++
++/* ------ Static Variables ------ */
++
++/* ------ Global Variable Declarations ------- */
++SD_PNP_INFO Ids[] = {
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1,
++        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
++        .SDIO_FunctionClass = FUNCTION_CLASS,
++        .SDIO_FunctionNo = 1
++    },
++    {
++    }                      //list is null termintaed
++};
++
++TARGET_FUNCTION_CONTEXT FunctionContext = {
++    .function.Version    = CT_SDIO_STACK_VERSION_CODE,
++    .function.pName      = "sdio_wlan",
++    .function.MaxDevices = 1,
++    .function.NumDevices = 0,
++    .function.pIds       = Ids,
++    .function.pProbe     = hifDeviceInserted,
++    .function.pRemove    = hifDeviceRemoved,
++    .function.pSuspend   = NULL,
++    .function.pResume    = NULL,
++    .function.pWake      = NULL,
++    .function.pContext   = &FunctionContext,
++};
++
++HIF_DEVICE hifDevice[HIF_MAX_DEVICES];
++HTC_CALLBACKS htcCallbacks;
++BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM];
++static BUS_REQUEST *s_busRequestFreeQueue = NULL;
++OS_CRITICALSECTION lock;
++extern A_UINT32 onebitmode;
++extern A_UINT32 busspeedlow;
++
++#ifdef DEBUG
++extern A_UINT32 debughif;
++#define ATH_DEBUG_ERROR 1
++#define ATH_DEBUG_WARN  2
++#define ATH_DEBUG_TRACE 3
++#define _AR_DEBUG_PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(lvl, args)\
++    {if (lvl <= debughif)\
++        A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\
++    }
++#else
++#define AR_DEBUG_PRINTF(lvl, args)
++#endif
++
++static BUS_REQUEST *hifAllocateBusRequest(void);
++static void hifFreeBusRequest(BUS_REQUEST *busrequest);
++static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper);
++static void ResetAllCards(void);
++
++/* ------ Functions ------ */
++int HIFInit(HTC_CALLBACKS *callbacks)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(callbacks != NULL);
++
++    /* Store the callback and event handlers */
++    htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
++    htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler;
++    htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler;
++    htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler;
++    htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler;
++    htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler;
++    htcCallbacks.dsrHandler = callbacks->dsrHandler;
++
++    CriticalSectionInit(&lock);
++
++    /* Register with bus driver core */
++    status = SDIO_RegisterFunction(&FunctionContext.function);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++
++    return(0);
++}
++
++A_STATUS
++HIFReadWrite(HIF_DEVICE *device,
++             A_UINT32 address,
++             A_UCHAR *buffer,
++             A_UINT32 length,
++             A_UINT32 request,
++             void *context)
++{
++    A_UINT8 rw;
++    A_UINT8 mode;
++    A_UINT8 funcNo;
++    A_UINT8 opcode;
++    A_UINT16 count;
++    SDREQUEST *sdrequest;
++    SDIO_STATUS sdiostatus;
++    BUS_REQUEST *busrequest;
++    A_STATUS    status = A_OK;
++
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++
++    do {
++        busrequest = hifAllocateBusRequest();
++        if (busrequest == NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n"));
++            status = A_NO_RESOURCE;
++            break;
++        }
++
++        sdrequest = busrequest->request;
++        busrequest->context = context;
++
++        sdrequest->pDataBuffer = buffer;
++        if (request & HIF_SYNCHRONOUS) {
++            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS;
++            sdrequest->pCompleteContext = NULL;
++            sdrequest->pCompletion = NULL;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n"));
++        } else if (request & HIF_ASYNCHRONOUS) {
++            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS |
++                               SDREQ_FLAGS_TRANS_ASYNC;
++            sdrequest->pCompleteContext = busrequest;
++            sdrequest->pCompletion = hifRWCompletionHandler;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid execution mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_EXTENDED_IO) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n"));
++            sdrequest->Command = CMD53;
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid command type: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_BLOCK_BASIS) {
++            mode = CMD53_BLOCK_BASIS;
++            sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE;
++            sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE;
++            count = sdrequest->BlockCount;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Block mode (BlockLen: %d, BlockCount: %d)\n",
++                            sdrequest->BlockLen, sdrequest->BlockCount));
++        } else if (request & HIF_BYTE_BASIS) {
++            mode = CMD53_BYTE_BASIS;
++            sdrequest->BlockLen = length;
++            sdrequest->BlockCount = 1;
++            count = sdrequest->BlockLen;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Byte mode (BlockLen: %d, BlockCount: %d)\n",
++                            sdrequest->BlockLen, sdrequest->BlockCount));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid data mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++#if 0
++        /* useful for checking register accesses */
++        if (length & 0x3) {
++            A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n",
++                                request & HIF_WRITE ? "write":"read", address, length);
++        }
++#endif
++
++        if ((address >= HIF_MBOX_START_ADDR(0)) &&
++            (address <= HIF_MBOX_END_ADDR(3)))
++        {
++
++            DBG_ASSERT(length <= HIF_MBOX_WIDTH);
++
++            /*
++             * Mailbox write. Adjust the address so that the last byte
++             * falls on the EOM address.
++             */
++            address += (HIF_MBOX_WIDTH - length);
++        }
++
++
++
++        if (request & HIF_WRITE) {
++            rw = CMD53_WRITE;
++            sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n"));
++        } else if (request & HIF_READ) {
++            rw = CMD53_READ;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid direction: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        if (request & HIF_FIXED_ADDRESS) {
++            opcode = CMD53_FIXED_ADDRESS;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n"));
++        } else if (request & HIF_INCREMENTAL_ADDRESS) {
++            opcode = CMD53_INCR_ADDRESS;
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n"));
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Invalid address mode: 0x%08x\n", request));
++            status = A_EINVAL;
++            break;
++        }
++
++        funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle);
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo));
++        SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo,
++                           mode, opcode, address, count);
++
++        /* Send the command out */
++        sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest);
++
++        if (!SDIO_SUCCESS(sdiostatus)) {
++            status = A_ERROR;
++        }
++
++    } while (FALSE);
++
++    if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) {
++        if (busrequest != NULL) {
++            hifFreeBusRequest(busrequest);
++        }
++    }
++
++    if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) {
++            /* call back async handler on failure */
++        htcCallbacks.rwCompletionHandler(context, status);
++    }
++
++    return status;
++}
++
++A_STATUS
++HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
++                   void *config, A_UINT32 configLen)
++{
++    A_UINT32 count;
++
++    switch(opcode) {
++        case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
++            ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE;
++            ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE;
++            ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE;
++            ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE;
++            break;
++
++        case HIF_DEVICE_GET_MBOX_ADDR:
++            for (count = 0; count < 4; count ++) {
++                ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count);
++            }
++            break;
++        case HIF_DEVICE_GET_IRQ_PROC_MODE:
++                /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */
++            *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC;
++            break;
++        default:
++            AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
++                            ("Unsupported configuration opcode: %d\n", opcode));
++            return A_ERROR;
++    }
++
++    return A_OK;
++}
++
++void
++HIFShutDownDevice(HIF_DEVICE *device)
++{
++    A_UINT8 data;
++    A_UINT32 count;
++    SDIO_STATUS status;
++    SDCONFIG_BUS_MODE_DATA busSettings;
++    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
++
++    if (device != NULL) {
++        DBG_ASSERT(device->handle != NULL);
++
++        /* Remove the allocated current if any */
++        status = SDLIB_IssueConfig(device->handle,
++                                   SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /* Disable the card */
++        fData.EnableFlags = SDCONFIG_DISABLE_FUNC;
++        fData.TimeOut = 1;
++        status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE,
++                                   &fData, sizeof(fData));
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /* Perform a soft I/O reset */
++        data = SDIO_IO_RESET;
++        status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG,
++                                  &data, 1, 1);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++
++        /*
++         * WAR - Codetelligence driver does not seem to shutdown correctly in 1
++         * bit mode. By default it configures the HC in the 4 bit. Its later in
++         * our driver that we switch to 1 bit mode. If we try to shutdown, the
++         * driver hangs so we revert to 4 bit mode, to be transparent to the
++         * underlying bus driver.
++         */
++        if (onebitmode) {
++            ZERO_OBJECT(busSettings);
++            busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle);
++            SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
++                                   SDCONFIG_BUS_WIDTH_4_BIT);
++
++            /* Issue config request to change the bus width to 4 bit */
++            status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
++                                       &busSettings,
++                                       sizeof(SDCONFIG_BUS_MODE_DATA));
++            DBG_ASSERT(SDIO_SUCCESS(status));
++        }
++
++        /* Free the bus requests */
++        for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
++            SDDeviceFreeRequest(device->handle, busRequest[count].request);
++        }
++        /* Clean up the queue */
++        s_busRequestFreeQueue = NULL;
++    } else {
++            /* since we are unloading the driver anyways, reset all cards in case the SDIO card
++             * is externally powered and we are unloading the SDIO stack.  This avoids the problem when
++             * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already
++             * enumerated */
++        ResetAllCards();
++        /* Unregister with bus driver core */
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Unregistering with the bus driver\n"));
++        status = SDIO_UnregisterFunction(&FunctionContext.function);
++        DBG_ASSERT(SDIO_SUCCESS(status));
++    }
++}
++
++void
++hifRWCompletionHandler(SDREQUEST *request)
++{
++    A_STATUS status;
++    void *context;
++    BUS_REQUEST *busrequest;
++
++    if (SDIO_SUCCESS(request->Status)) {
++        status = A_OK;
++    } else {
++        status = A_ERROR;
++    }
++
++    DBG_ASSERT(status == A_OK);
++    busrequest = (BUS_REQUEST *) request->pCompleteContext;
++    context = (void *) busrequest->context;
++        /* free the request before calling the callback, in case the
++         * callback submits another request, this guarantees that
++         * there is at least 1 free request available everytime the callback
++         * is invoked */
++    hifFreeBusRequest(busrequest);
++    htcCallbacks.rwCompletionHandler(context, status);
++}
++
++void
++hifIRQHandler(void *context)
++{
++    A_STATUS status;
++    HIF_DEVICE *device;
++
++    device = (HIF_DEVICE *)context;
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++    status = htcCallbacks.dsrHandler(device->htc_handle);
++    DBG_ASSERT(status == A_OK);
++}
++
++BOOL
++hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle)
++{
++    BOOL enabled;
++    A_UINT8 data;
++    A_UINT32 count;
++    HIF_DEVICE *device;
++    SDIO_STATUS status;
++    A_UINT16 maxBlocks;
++    A_UINT16 maxBlockSize;
++    SDCONFIG_BUS_MODE_DATA busSettings;
++    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
++    TARGET_FUNCTION_CONTEXT *functionContext;
++    SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent;
++    SD_BUSCLOCK_RATE                currentBusClock;
++
++    DBG_ASSERT(function != NULL);
++    DBG_ASSERT(handle != NULL);
++
++    device = addHifDevice(handle);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
++    functionContext =  (TARGET_FUNCTION_CONTEXT *)function->pContext;
++
++    /*
++     * Issue commands to get the manufacturer ID and stuff and compare it
++     * against the rev Id derived from the ID registered during the
++     * initialization process. Report the device only in the case there
++     * is a match. In the case od SDIO, the bus driver has already queried
++     * these details so we just need to use their data structures to get the
++     * relevant values. Infact, the driver has already matched it against
++     * the Ids that we registered with it so we dont need to the step here.
++     */
++
++    /* Configure the SDIO Bus Width */
++    if (onebitmode) {
++        data = SDIO_BUS_WIDTH_1_BIT;
++        status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1);
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Unable to set the bus width to 1 bit\n"));
++            return FALSE;
++        }
++    }
++
++    /* Get current bus flags */
++    ZERO_OBJECT(busSettings);
++
++    busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle);
++    if (onebitmode) {
++        SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
++                               SDCONFIG_BUS_WIDTH_1_BIT);
++    }
++
++        /* get the current operating clock, the bus driver sets us up based
++         * on what our CIS reports and what the host controller can handle
++         * we can use this to determine whether we want to drop our clock rate
++         * down */
++    currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle);
++    busSettings.ClockRate = currentBusClock;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("HIF currently running at: %d \n",currentBusClock));
++
++        /* see if HIF wants to run at a lower clock speed, we may already be
++         * at that lower clock speed */
++    if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) {
++        busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow;
++        AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
++                        ("HIF overriding clock to %d \n",busSettings.ClockRate));
++    }
++
++    /* Issue config request to override clock rate */
++    status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings,
++                               sizeof(SDCONFIG_BUS_MODE_DATA));
++    if (!SDIO_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Unable to configure the host clock\n"));
++        return FALSE;
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Configured clock: %d, Maximum clock: %d\n",
++                        busSettings.ActualClockRate,
++                        SDDEVICE_GET_MAX_CLOCK(handle)));
++    }
++
++    /*
++     * Check if the target supports block mode. This result of this check
++     * can be used to implement the HIFReadWrite API.
++     */
++    if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) {
++        /* Limit block size to operational block limit or card function
++           capability */
++        maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle),
++                           SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle));
++
++        /* check if the card support multi-block transfers */
++        if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n"));
++
++            /* Limit block size to max byte basis */
++            maxBlockSize =  min(maxBlockSize,
++                                (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS);
++            maxBlocks = 1;
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n"));
++            maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle);
++            status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE);
++            if (!SDIO_SUCCESS(status)) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                                ("Failed to set block size. Err:%d\n", status));
++                return FALSE;
++            }
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Bytes Per Block: %d bytes, Block Count:%d \n",
++                        maxBlockSize, maxBlocks));
++    } else {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Function does not support Block Mode!\n"));
++        return FALSE;
++    }
++
++    /* Allocate the slot current */
++    status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent);
++    if (SDIO_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n",
++                                slotCurrent.SlotCurrent));
++        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT,
++                                   &slotCurrent, sizeof(slotCurrent));
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                            ("Failed to allocate slot current %d\n", status));
++            return FALSE;
++        }
++    }
++
++    /* Enable the dragon function */
++    count = 0;
++    enabled = FALSE;
++    fData.TimeOut = 1;
++    fData.EnableFlags = SDCONFIG_ENABLE_FUNC;
++    while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled)
++    {
++        /* Enable dragon */
++        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE,
++                                   &fData, sizeof(fData));
++        if (!SDIO_SUCCESS(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                            ("Attempting to enable the card again\n"));
++            continue;
++        }
++
++        /* Mark the status as enabled */
++        enabled = TRUE;
++    }
++
++    /* Check if we were succesful in enabling the target */
++    if (!enabled) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
++                        ("Failed to communicate with the target\n"));
++        return FALSE;
++    }
++
++    /* Allocate the bus requests to be used later */
++    A_MEMZERO(busRequest, sizeof(busRequest));
++    for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
++        if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n"));
++            /* TODO: Free the memory that has already been allocated */
++            return FALSE;
++        }
++        hifFreeBusRequest(&busRequest[count]);
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                ("0x%08x = busRequest[%d].request = 0x%08x\n",
++                              (unsigned int) &busRequest[count], count,
++                              (unsigned int) busRequest[count].request));
++    }
++
++        /* Schedule a worker to handle device inserted, this is a temporary workaround
++         * to fix a deadlock if the device fails to intialize in the insertion handler
++         * The failure causes the instance to shutdown the HIF layer and unregister the
++         * function driver within the busdriver probe context which can deadlock
++         *
++         * NOTE: we cannot use the default work queue because that would block
++         * SD bus request processing for all synchronous I/O. We must use a kernel
++         * thread that is creating using the helper library.
++         * */
++
++    if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper,
++                         insert_helper_func,
++                         device))) {
++        device->helper_started = TRUE;
++    }
++
++    return TRUE;
++}
++
++static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper)
++{
++
++    /*
++     * Adding a wait of around a second before we issue the very first
++     * command to dragon. During the process of loading/unloading the
++     * driver repeatedly it was observed that we get a data timeout
++     * while accessing function 1 registers in the chip. The theory at
++     * this point is that some initialization delay in dragon is
++     * causing the SDIO state in dragon core to be not ready even after
++     * the ready bit indicates that function 1 is ready. Accomodating
++     * for this behavior by adding some delay in the driver before it
++     * issues the first command after switching on dragon. Need to
++     * investigate this a bit more - TODO
++     */
++
++    A_MDELAY(1000);
++        /* Inform HTC */
++    if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n"));
++    }
++
++    return 0;
++}
++
++void
++HIFAckInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Acknowledge our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++}
++
++void
++HIFUnMaskInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Register the IRQ Handler */
++    SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device);
++
++    /* Unmask our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++}
++
++void HIFMaskInterrupt(HIF_DEVICE *device)
++{
++    SDIO_STATUS status;
++    DBG_ASSERT(device != NULL);
++    DBG_ASSERT(device->handle != NULL);
++
++    /* Mask our function IRQ */
++    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ,
++                               NULL, 0);
++    DBG_ASSERT(SDIO_SUCCESS(status));
++
++    /* Unregister the IRQ Handler */
++    SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL);
++}
++
++static BUS_REQUEST *hifAllocateBusRequest(void)
++{
++    BUS_REQUEST *busrequest;
++
++    /* Acquire lock */
++    CriticalSectionAcquire(&lock);
++
++    /* Remove first in list */
++    if((busrequest = s_busRequestFreeQueue) != NULL)
++    {
++        s_busRequestFreeQueue = busrequest->next;
++    }
++
++    /* Release lock */
++    CriticalSectionRelease(&lock);
++
++    return busrequest;
++}
++
++static void
++hifFreeBusRequest(BUS_REQUEST *busrequest)
++{
++    DBG_ASSERT(busrequest != NULL);
++
++    /* Acquire lock */
++    CriticalSectionAcquire(&lock);
++
++    /* Insert first in list */
++    busrequest->next = s_busRequestFreeQueue;
++    s_busRequestFreeQueue = busrequest;
++
++    /* Release lock */
++    CriticalSectionRelease(&lock);
++}
++
++void
++hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle)
++{
++    A_STATUS status;
++    HIF_DEVICE *device;
++    DBG_ASSERT(function != NULL);
++    DBG_ASSERT(handle != NULL);
++
++    device = getHifDevice(handle);
++    status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK);
++
++        /* cleanup the helper thread */
++    if (device->helper_started) {
++        SDLIB_OSDeleteHelper(&device->insert_helper);
++        device->helper_started = FALSE;
++    }
++
++    delHifDevice(handle);
++    DBG_ASSERT(status == A_OK);
++}
++
++HIF_DEVICE *
++addHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    hifDevice[0].handle = handle;
++    return &hifDevice[0];
++}
++
++HIF_DEVICE *
++getHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    return &hifDevice[0];
++}
++
++void
++delHifDevice(SDDEVICE *handle)
++{
++    DBG_ASSERT(handle != NULL);
++    hifDevice[0].handle = NULL;
++}
++
++struct device*
++HIFGetOSDevice(HIF_DEVICE *device)
++{
++    return &device->handle->Device->dev;
++}
++
++static void ResetAllCards(void)
++{
++    UINT8       data;
++    SDIO_STATUS status;
++    int         i;
++
++    data = SDIO_IO_RESET;
++
++    /* set the I/O CARD reset bit:
++     * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you
++     * set the RES bit in the SDIO_IO_ABORT register.  This bit however "normally" resets the
++     * I/O functions leaving the SDIO core in the same state (as per SDIO spec).
++     * In this design, this reset can be used to reset the SDIO core itself */
++    for (i = 0; i < HIF_MAX_DEVICES; i++) {
++        if (hifDevice[i].handle != NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
++                        ("Issuing I/O Card reset for instance: %d \n",i));
++                /* set the I/O Card reset bit */
++            status = SDLIB_IssueCMD52(hifDevice[i].handle,
++                                      0,                    /* function 0 space */
++                                      SDIO_IO_ABORT_REG,
++                                      &data,
++                                      1,                    /* 1 byte */
++                                      TRUE);                /* write */
++        }
++    }
++
++}
++
++void HIFSetHandle(void *hif_handle, void *handle)
++{
++    HIF_DEVICE *device = (HIF_DEVICE *) hif_handle;
++
++    device->htc_handle = handle;
++
++    return;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif_internal.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif_internal.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/hif/hif_internal.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/hif/hif_internal.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,102 @@
++/*
++ * @file: hif_internal.h
++ *
++ * @abstract: internal header file for hif layer
++ *
++ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <linux/sdio/ctsystem.h>
++#include <linux/sdio/sdio_busdriver.h>
++#include <linux/sdio/_sdio_defs.h>
++#include <linux/sdio/sdio_lib.h>
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "hif.h"
++
++#define MANUFACTURER_ID_AR6001_BASE        0x100
++#define MANUFACTURER_ID_AR6002_BASE        0x200
++#define FUNCTION_CLASS                     0x0
++#define MANUFACTURER_CODE                  0x271
++
++#define BUS_REQUEST_MAX_NUM                64
++
++#define SDIO_CLOCK_FREQUENCY_DEFAULT       25000000
++#define SDWLAN_ENABLE_DISABLE_TIMEOUT      20
++#define FLAGS_CARD_ENAB                    0x02
++#define FLAGS_CARD_IRQ_UNMSK               0x04
++
++#define HIF_MBOX_BLOCK_SIZE                128
++#define HIF_MBOX_BASE_ADDR                 0x800
++#define HIF_MBOX_WIDTH                     0x800
++#define HIF_MBOX0_BLOCK_SIZE               1
++#define HIF_MBOX1_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++#define HIF_MBOX2_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++#define HIF_MBOX3_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
++
++#define HIF_MBOX_START_ADDR(mbox)                        \
++    HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH
++
++#define HIF_MBOX_END_ADDR(mbox)                                \
++    HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1
++
++struct hif_device {
++    SDDEVICE *handle;
++    void *htc_handle;
++    OSKERNEL_HELPER insert_helper;
++    BOOL  helper_started;
++};
++
++typedef struct target_function_context {
++    SDFUNCTION           function; /* function description of the bus driver */
++    OS_SEMAPHORE         instanceSem; /* instance lock. Unused */
++    SDLIST               instanceList; /* list of instances. Unused */
++} TARGET_FUNCTION_CONTEXT;
++
++typedef struct bus_request {
++    struct bus_request *next;
++    SDREQUEST *request;
++    void *context;
++} BUS_REQUEST;
++
++BOOL
++hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device);
++
++void
++hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device);
++
++SDREQUEST *
++hifAllocateDeviceRequest(SDDEVICE *device);
++
++void
++hifFreeDeviceRequest(SDREQUEST *request);
++
++void
++hifRWCompletionHandler(SDREQUEST *request);
++
++void
++hifIRQHandler(void *context);
++
++HIF_DEVICE *
++addHifDevice(SDDEVICE *handle);
++
++HIF_DEVICE *
++getHifDevice(SDDEVICE *handle);
++
++void
++delHifDevice(SDDEVICE *handle);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k.c 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,991 @@
++/*
++ * AR6K device layer that handles register level I/O
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "hif.h"
++#include "htc_packet.h"
++#include "ar6k.h"
++
++#define MAILBOX_FOR_BLOCK_SIZE 1
++
++extern A_UINT32 resetok;
++
++static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
++static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
++
++#define LOCK_AR6K(p)      A_MUTEX_LOCK(&(p)->Lock);
++#define UNLOCK_AR6K(p)    A_MUTEX_UNLOCK(&(p)->Lock);
++
++void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
++{
++    LOCK_AR6K(pDev);
++    HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
++    UNLOCK_AR6K(pDev);
++}
++
++HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
++{
++    HTC_PACKET *pPacket;
++
++    LOCK_AR6K(pDev);
++    pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
++    UNLOCK_AR6K(pDev);
++
++    return pPacket;
++}
++
++A_STATUS DevSetup(AR6K_DEVICE *pDev)
++{
++    A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
++    A_UINT32 blocksizes[AR6K_MAILBOXES];
++    A_STATUS status = A_OK;
++    int      i;
++
++    AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
++    AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
++
++    do {
++            /* give a handle to HIF for this target */
++        HIFSetHandle(pDev->HIFDevice, (void *)pDev);
++            /* initialize our free list of IO packets */
++        INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
++        A_MUTEX_INIT(&pDev->Lock);
++
++            /* get the addresses for all 4 mailboxes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
++                                    mailboxaddrs, sizeof(mailboxaddrs));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* carve up register I/O packets (these are for ASYNC register I/O ) */
++        for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
++            HTC_PACKET *pIOPacket;
++            pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
++            SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
++                                          pDev,
++                                          pDev->RegIOBuffers[i].Buffer,
++                                          AR6K_REG_IO_BUFFER_SIZE,
++                                          0); /* don't care */
++            AR6KFreeIOPacket(pDev,pIOPacket);
++        }
++
++            /* get the address of the mailbox we are using */
++        pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
++
++            /* get the block sizes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    blocksizes, sizeof(blocksizes));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
++             * size on mailbox 0 is artificially set to 1.  So we use the block size that is set
++             * for the other 3 mailboxes */
++        pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
++            /* must be a power of 2 */
++        AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
++
++            /* assemble mask, used for padding to a block */
++        pDev->BlockMask = pDev->BlockSize - 1;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
++                    pDev->BlockSize, pDev->MailboxAddress));
++
++        pDev->GetPendingEventsFunc = NULL;
++            /* see if the HIF layer implements the get pending events function  */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
++                           &pDev->GetPendingEventsFunc,
++                           sizeof(pDev->GetPendingEventsFunc));
++
++            /* assume we can process HIF interrupt events asynchronously */
++        pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
++
++            /* see if the HIF layer overrides this assumption */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_IRQ_PROC_MODE,
++                           &pDev->HifIRQProcessingMode,
++                           sizeof(pDev->HifIRQProcessingMode));
++
++        switch (pDev->HifIRQProcessingMode) {
++            case HIF_DEVICE_IRQ_SYNC_ONLY:
++                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
++                break;
++            case HIF_DEVICE_IRQ_ASYNC_SYNC:
++                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
++                break;
++            default:
++                AR_DEBUG_ASSERT(FALSE);
++        }
++
++        pDev->HifMaskUmaskRecvEvent = NULL;
++
++            /* see if the HIF layer implements the mask/unmask recv events function  */
++        HIFConfigureDevice(pDev->HIFDevice,
++                           HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
++                           &pDev->HifMaskUmaskRecvEvent,
++                           sizeof(pDev->HifMaskUmaskRecvEvent));
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
++                 (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
++
++        status = DevDisableInterrupts(pDev);
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++            /* make sure handle is cleared */
++        HIFSetHandle(pDev->HIFDevice, NULL);
++    }
++
++    return status;
++
++}
++
++static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
++{
++    A_STATUS                  status;
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++    LOCK_AR6K(pDev);
++
++        /* Enable all the interrupts except for the dragon interrupt */
++    pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
++                                      INT_STATUS_ENABLE_CPU_SET(0x01) |
++                                      INT_STATUS_ENABLE_COUNTER_SET(0x01);
++
++    if (NULL == pDev->GetPendingEventsFunc) {
++        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    } else {
++        /* The HIF layer provided us with a pending events function which means that
++         * the detection of pending mbox messages is handled in the HIF layer.
++         * This is the case for the SPI2 interface.
++         * In the normal case we enable MBOX interrupts, for the case
++         * with HIFs that offer this mechanism, we keep these interrupts
++         * masked */
++        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    }
++
++
++    /* Set up the CPU Interrupt Status Register */
++    pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
++
++    /* Set up the Error Interrupt Status Register */
++    pDev->IrqEnableRegisters.error_status_enable =
++                                  ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
++                                  ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
++
++    /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
++    pDev->IrqEnableRegisters.counter_int_status_enable =
++        COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
++
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++    UNLOCK_AR6K(pDev);
++
++        /* always synchronous */
++    status = HIFReadWrite(pDev->HIFDevice,
++                          INT_STATUS_ENABLE_ADDRESS,
++                          &regs.int_status_enable,
++                          AR6K_IRQ_ENABLE_REGS_SIZE,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        /* Can't write it for some reason */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                        ("Failed to update interrupt control registers err: %d\n", status));
++
++    }
++
++    return status;
++}
++
++static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
++{
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++    LOCK_AR6K(pDev);
++        /* Disable all interrupts */
++    pDev->IrqEnableRegisters.int_status_enable = 0;
++    pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
++    pDev->IrqEnableRegisters.error_status_enable = 0;
++    pDev->IrqEnableRegisters.counter_int_status_enable = 0;
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++    UNLOCK_AR6K(pDev);
++
++        /* always synchronous */
++    return HIFReadWrite(pDev->HIFDevice,
++                        INT_STATUS_ENABLE_ADDRESS,
++                        &regs.int_status_enable,
++                        AR6K_IRQ_ENABLE_REGS_SIZE,
++                        HIF_WR_SYNC_BYTE_INC,
++                        NULL);
++}
++
++/* enable device interrupts */
++A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
++{
++        /* Unmask the host controller interrupts */
++    HIFUnMaskInterrupt(pDev->HIFDevice);
++
++    return DevEnableInterrupts(pDev);
++}
++
++/* disable all device interrupts */
++A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++
++    status = DevDisableInterrupts(pDev);
++
++    if (A_SUCCESS(status)) {
++            /* Disable the interrupt at the HIF layer */
++        HIFMaskInterrupt(pDev->HIFDevice);
++    }
++
++    return status;
++}
++
++/* callback when our fetch to enable/disable completes */
++static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    if (A_FAILED(pPacket->Status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Failed to disable receiver, status:%d \n", pPacket->Status));
++    }
++        /* free this IO packet */
++    AR6KFreeIOPacket(pDev,pPacket);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
++}
++
++/* disable packet reception (used in case the host runs out of buffers)
++ * this is the "override" method when the HIF reports another methods to
++ * disable recv events */
++static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
++{
++    A_STATUS                  status = A_OK;
++    HTC_PACKET                *pIOPacket = NULL;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
++            EnableRecv,AsyncMode));
++
++    do {
++
++        if (AsyncMode) {
++
++            pIOPacket = AR6KAllocIOPacket(pDev);
++
++            if (NULL == pIOPacket) {
++                status = A_NO_MEMORY;
++                AR_DEBUG_ASSERT(FALSE);
++                break;
++            }
++
++                /* stick in our completion routine when the I/O operation completes */
++            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
++            pIOPacket->pContext = pDev;
++
++                /* call the HIF layer override and do this asynchronously */
++            status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
++                                                 EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
++                                                 pIOPacket);
++            break;
++        }
++
++            /* if we get here we are doing it synchronously */
++        status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
++                                             EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
++                                             NULL);
++
++    } while (FALSE);
++
++    if (A_FAILED(status) && (pIOPacket != NULL)) {
++        AR6KFreeIOPacket(pDev,pIOPacket);
++    }
++
++    return status;
++}
++
++/* disable packet reception (used in case the host runs out of buffers)
++ * this is the "normal" method using the interrupt enable registers through
++ * the host I/F */
++static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
++{
++    A_STATUS                  status = A_OK;
++    HTC_PACKET                *pIOPacket = NULL;
++    AR6K_IRQ_ENABLE_REGISTERS regs;
++
++        /* take the lock to protect interrupt enable shadows */
++    LOCK_AR6K(pDev);
++
++    if (EnableRecv) {
++        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    } else {
++        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
++    }
++
++        /* copy into our temp area */
++    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
++    UNLOCK_AR6K(pDev);
++
++    do {
++
++        if (AsyncMode) {
++
++            pIOPacket = AR6KAllocIOPacket(pDev);
++
++            if (NULL == pIOPacket) {
++                status = A_NO_MEMORY;
++                AR_DEBUG_ASSERT(FALSE);
++                break;
++            }
++
++                /* copy values to write to our async I/O buffer */
++            A_MEMCPY(pIOPacket->pBuffer,&regs,AR6K_IRQ_ENABLE_REGS_SIZE);
++
++                /* stick in our completion routine when the I/O operation completes */
++            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
++            pIOPacket->pContext = pDev;
++
++                /* write it out asynchronously */
++            HIFReadWrite(pDev->HIFDevice,
++                         INT_STATUS_ENABLE_ADDRESS,
++                         pIOPacket->pBuffer,
++                         AR6K_IRQ_ENABLE_REGS_SIZE,
++                         HIF_WR_ASYNC_BYTE_INC,
++                         pIOPacket);
++            break;
++        }
++
++        /* if we get here we are doing it synchronously */
++
++        status = HIFReadWrite(pDev->HIFDevice,
++                              INT_STATUS_ENABLE_ADDRESS,
++                              &regs.int_status_enable,
++                              AR6K_IRQ_ENABLE_REGS_SIZE,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++    } while (FALSE);
++
++    if (A_FAILED(status) && (pIOPacket != NULL)) {
++        AR6KFreeIOPacket(pDev,pIOPacket);
++    }
++
++    return status;
++}
++
++
++A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
++{
++    if (NULL == pDev->HifMaskUmaskRecvEvent) {
++        return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
++    } else {
++        return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
++    }
++}
++
++A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
++{
++    if (NULL == pDev->HifMaskUmaskRecvEvent) {
++        return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
++    } else {
++        return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
++    }
++}
++
++void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
++                      AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
++{
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
++
++    if (pIrqProcRegs != NULL) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Int Status:               0x%x\n",pIrqProcRegs->host_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("CPU Int Status:            0x%x\n",pIrqProcRegs->cpu_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Error Int Status:          0x%x\n",pIrqProcRegs->error_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Counter Int Status:        0x%x\n",pIrqProcRegs->counter_int_status));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Mbox Frame:                0x%x\n",pIrqProcRegs->mbox_frame));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead Valid:        0x%x\n",pIrqProcRegs->rx_lookahead_valid));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead 0:            0x%x\n",pIrqProcRegs->rx_lookahead[0]));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Rx Lookahead 1:            0x%x\n",pIrqProcRegs->rx_lookahead[1]));
++    }
++
++    if (pIrqEnableRegs != NULL) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Int Status Enable:         0x%x\n",pIrqEnableRegs->int_status_enable));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
++            ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
++        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
++    }
++}
++
++
++#ifdef MBOXHW_UNIT_TEST
++
++
++/* This is a mailbox hardware unit test that must be called in a schedulable context
++ * This test is very simple, it will send a list of buffers with a counting pattern
++ * and the target will invert the data and send the message back
++ *
++ * the unit test has the following constraints:
++ *
++ * The target has at least 8 buffers of 256 bytes each. The host will send
++ * the following pattern of buffers in rapid succession :
++ *
++ * 1 buffer - 128 bytes
++ * 1 buffer - 256 bytes
++ * 1 buffer - 512 bytes
++ * 1 buffer - 1024 bytes
++ *
++ * The host will send the buffers to one mailbox and wait for buffers to be reflected
++ * back from the same mailbox. The target sends the buffers FIFO order.
++ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
++ *
++ *
++ * Note:  To simplifythe test , we assume that the chosen buffer sizes
++ *        will fall on a nice block pad
++ *
++ * It is expected that higher-order tests will be written to stress the mailboxes using
++ * a message-based protocol (with some performance timming) that can create more
++ * randomness in the packets sent over mailboxes.
++ *
++ * */
++
++#define A_ROUND_UP_PWR2(x, align)    (((int) (x) + ((align)-1)) & ~((align)-1))
++
++#define BUFFER_BLOCK_PAD 128
++
++#if 0
++#define BUFFER1 128
++#define BUFFER2 256
++#define BUFFER3 512
++#define BUFFER4 1024
++#endif
++
++#if 1
++#define BUFFER1 80
++#define BUFFER2 200
++#define BUFFER3 444
++#define BUFFER4 800
++#endif
++
++#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
++                     A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
++
++#define TEST_BYTES (BUFFER1 +  BUFFER2 + BUFFER3 + BUFFER4)
++
++#define TEST_CREDITS_RECV_TIMEOUT 100
++
++static A_UINT8  g_Buffer[TOTAL_BYTES];
++static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
++static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
++
++#define BUFFER_PROC_LIST_DEPTH 4
++
++typedef struct _BUFFER_PROC_LIST{
++    A_UINT8  *pBuffer;
++    A_UINT32 length;
++}BUFFER_PROC_LIST;
++
++
++#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
++{                                                   \
++    (pList)->pBuffer = (pCurrpos);                  \
++    (pList)->length = (len);                        \
++    (pCurrpos) += (len);                            \
++    (pList)++;                                      \
++}
++
++/* a simple and crude way to send different "message" sizes */
++static void AssembleBufferList(BUFFER_PROC_LIST *pList)
++{
++    A_UINT8 *pBuffer = g_Buffer;
++
++#if BUFFER_PROC_LIST_DEPTH < 4
++#error "Buffer processing list depth is not deep enough!!"
++#endif
++
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
++    PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
++
++}
++
++#define FILL_ZERO     TRUE
++#define FILL_COUNTING FALSE
++static void InitBuffers(A_BOOL Zero)
++{
++    A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
++    int      i;
++
++        /* fill buffer with 16 bit counting pattern or zeros */
++    for (i = 0; i <  (TOTAL_BYTES / 2) ; i++) {
++        if (!Zero) {
++            pBuffer16[i] = (A_UINT16)i;
++        } else {
++            pBuffer16[i] = 0;
++        }
++    }
++}
++
++
++static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
++{
++    int      i;
++    A_UINT16 startCount;
++    A_BOOL   success = TRUE;
++
++        /* get the starting count */
++    startCount = pBuffer16[0];
++        /* invert it, this is the expected value */
++    startCount = ~startCount;
++        /* scan the buffer and verify */
++    for (i = 0; i < (Length / 2) ; i++,startCount++) {
++            /* target will invert all the data */
++        if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
++            success = FALSE;
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
++                        pBuffer16[i], ((A_UINT16)~startCount), i, Length));
++             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
++                        pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
++            break;
++        }
++    }
++
++    return success;
++}
++
++static A_BOOL CheckBuffers(void)
++{
++    int      i;
++    A_BOOL   success = TRUE;
++    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
++
++        /* assemble the list */
++    AssembleBufferList(checkList);
++
++        /* scan the buffers and verify */
++    for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
++        success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
++        if (!success) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
++                        (A_UINT32)checkList[i].pBuffer, checkList[i].length));
++            break;
++        }
++    }
++
++    return success;
++}
++
++    /* find the end marker for the last buffer we will be sending */
++static A_UINT16 GetEndMarker(void)
++{
++    A_UINT8  *pBuffer;
++    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
++
++        /* fill up buffers with the normal counting pattern */
++    InitBuffers(FILL_COUNTING);
++
++        /* assemble the list we will be sending down */
++    AssembleBufferList(checkList);
++        /* point to the last 2 bytes of the last buffer */
++    pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
++
++        /* the last count in the last buffer is the marker */
++    return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
++}
++
++#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
++
++/* send the ordered buffers to the target */
++static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS         status = A_OK;
++    A_UINT32         request = HIF_WR_SYNC_BLOCK_INC;
++    BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
++    int              i;
++    int              totalBytes = 0;
++    int              paddedLength;
++    int              totalwPadding = 0;
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
++
++        /* fill buffer with counting pattern */
++    InitBuffers(FILL_COUNTING);
++
++        /* assemble the order in which we send */
++    AssembleBufferList(sendList);
++
++    for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
++
++            /* we are doing block transfers, so we need to pad everything to a block size */
++        paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
++                       (~(g_BlockSizes[mbox] - 1));
++
++            /* send each buffer synchronously */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              g_MailboxAddrs[mbox],
++                              sendList[i].pBuffer,
++                              paddedLength,
++                              request,
++                              NULL);
++        if (status != A_OK) {
++            break;
++        }
++        totalBytes += sendList[i].length;
++        totalwPadding += paddedLength;
++    }
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
++
++    return status;
++}
++
++/* poll the mailbox credit counter until we get a credit or timeout */
++static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
++{
++    A_STATUS status = A_OK;
++    int      timeout = TEST_CREDITS_RECV_TIMEOUT;
++    A_UINT8  credits = 0;
++    A_UINT32 address;
++
++    while (TRUE) {
++
++            /* Read the counter register to get credits, this auto-decrements  */
++        address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
++        status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
++                              HIF_RD_SYNC_BYTE_FIX, NULL);
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
++            status = A_ERROR;
++            break;
++        }
++
++        if (credits) {
++            break;
++        }
++
++        timeout--;
++
++        if (timeout <= 0) {
++              AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
++            status = A_ERROR;
++            break;
++        }
++
++         /* delay a little, target may not be ready */
++         msleep(1000);
++
++    }
++
++    if (status == A_OK) {
++        *pCredits = credits;
++    }
++
++    return status;
++}
++
++
++/* wait for the buffers to come back */
++static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS         status = A_OK;
++    A_UINT32         request = HIF_RD_SYNC_BLOCK_INC;
++    BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
++    int              curBuffer;
++    int              credits;
++    int              i;
++    int              totalBytes = 0;
++    int              paddedLength;
++    int              totalwPadding = 0;
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
++
++        /* zero the buffers */
++    InitBuffers(FILL_ZERO);
++
++        /* assemble the order in which we should receive */
++    AssembleBufferList(recvList);
++
++    curBuffer = 0;
++
++    while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
++
++            /* get number of buffers that have been completed, this blocks
++             * until we get at least 1 credit or it times out */
++        status = GetCredits(pDev, mbox, &credits);
++
++        if (status != A_OK) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
++
++            /* get all the buffers that are sitting on the queue */
++        for (i = 0; i < credits; i++) {
++            AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
++                /* recv the current buffer synchronously, the buffers should come back in
++                 * order... with padding applied by the target */
++            paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
++                       (~(g_BlockSizes[mbox] - 1));
++
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  g_MailboxAddrs[mbox],
++                                  recvList[curBuffer].pBuffer,
++                                  paddedLength,
++                                  request,
++                                  NULL);
++            if (status != A_OK) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
++                        recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
++                break;
++            }
++
++            totalwPadding += paddedLength;
++            totalBytes += recvList[curBuffer].length;
++            curBuffer++;
++        }
++
++        if (status != A_OK) {
++            break;
++        }
++            /* go back and get some more */
++        credits = 0;
++    }
++
++    if (totalBytes != TEST_BYTES) {
++        AR_DEBUG_ASSERT(FALSE);
++    }  else {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
++            mbox, totalBytes, totalwPadding));
++    }
++
++    return status;
++
++
++}
++
++static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
++{
++    A_STATUS status;
++
++    do {
++            /* send out buffers */
++        status = SendBuffers(pDev,mbox);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
++            break;
++        }
++
++            /* go get them, this will block */
++        status =  RecvBuffers(pDev, mbox);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
++            break;
++        }
++
++            /* check the returned data patterns */
++        if (!CheckBuffers()) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
++            status = A_ERROR;
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
++
++    }  while (FALSE);
++
++    return status;
++}
++
++/* here is where the test starts */
++A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
++{
++    int      i;
++    A_STATUS status;
++    int      credits = 0;
++    A_UINT8  params[4];
++    int      numBufs;
++    int      bufferSize;
++    A_UINT16 temp;
++
++
++    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START -  \n"));
++
++    do {
++            /* get the addresses for all 4 mailboxes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
++                                    g_MailboxAddrs, sizeof(g_MailboxAddrs));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* get the block sizes */
++        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++                                    g_BlockSizes, sizeof(g_BlockSizes));
++
++        if (status != A_OK) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* note, the HIF layer usually reports mbox 0 to have a block size of
++             * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
++             * the same. */
++        g_BlockSizes[0] = g_BlockSizes[1];
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
++
++        if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
++            AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
++                g_BlockSizes[1], BUFFER_BLOCK_PAD));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
++
++            /* the target lets us know it is ready by giving us 1 credit on
++             * mailbox 0 */
++        status = GetCredits(pDev, 0, &credits);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
++
++            /* read the first 4 scratch registers */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS,
++                              params,
++                              4,
++                              HIF_RD_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
++            break;
++        }
++
++        numBufs = params[0];
++        bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
++            ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
++            numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
++
++        if ((numBufs * bufferSize) < TOTAL_BYTES) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
++                TOTAL_BYTES, (numBufs*bufferSize)));
++            status = A_ERROR;
++            break;
++        }
++
++        temp = GetEndMarker();
++
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS + 4,
++                              (A_UINT8 *)&temp,
++                              2,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
++
++        temp = (A_UINT16)g_BlockSizes[1];
++            /* convert to a mask */
++        temp = temp - 1;
++        status = HIFReadWrite(pDev->HIFDevice,
++                              SCRATCH_ADDRESS + 6,
++                              (A_UINT8 *)&temp,
++                              2,
++                              HIF_WR_SYNC_BYTE_INC,
++                              NULL);
++
++        if (status != A_OK) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
++
++            /* execute the test on each mailbox */
++        for (i = 0; i < AR6K_MAILBOXES; i++) {
++            status = DoOneMboxHWTest(pDev, i);
++            if (status != A_OK) {
++                break;
++            }
++        }
++
++    } while (FALSE);
++
++    if (status == A_OK) {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! -  \n"));
++    } else {
++        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! -  \n"));
++    }
++        /* don't let HTC_Start continue, the target is actually not running any HTC code */
++    return A_ERROR;
++}
++#endif
++
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k_events.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k_events.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k_events.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k_events.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,638 @@
++/*
++ * AR6K Driver layer event handling (i.e. interrupts, message polling)
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "hif.h"
++#include "htc_packet.h"
++#include "ar6k.h"
++
++extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket);
++extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev);
++
++static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev);
++
++#define DELAY_PER_INTERVAL_MS 10  /* 10 MS delay per polling interval */
++
++/* completion routine for ALL HIF layer async I/O */
++A_STATUS DevRWCompletionHandler(void *context, A_STATUS status)
++{
++    HTC_PACKET *pPacket = (HTC_PACKET *)context;
++
++    COMPLETE_HTC_PACKET(pPacket,status);
++
++    return A_OK;
++}
++
++/* mailbox recv message polling */
++A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
++                            A_UINT32    *pLookAhead,
++                            int          TimeoutMS)
++{
++    A_STATUS status = A_OK;
++    int      timeout = TimeoutMS/DELAY_PER_INTERVAL_MS;
++
++    AR_DEBUG_ASSERT(timeout > 0);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n"));
++
++    while (TRUE) {
++
++        if (pDev->GetPendingEventsFunc != NULL)
++              {
++
++            HIF_PENDING_EVENTS_INFO events;
++
++            /* the HIF layer uses a special mechanism to get events, do this
++             * synchronously */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                            &events,
++                                            NULL);
++            if (A_FAILED(status))
++                      {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n"));
++                              break;
++            }
++
++            if (events.Events & HIF_RECV_MSG_AVAIL)
++                      {
++                    /*  there is a message available, the lookahead should be valid now */
++                *pLookAhead = events.LookAhead;
++
++                break;
++            }
++        }
++              else
++              {
++
++                /* this is the standard HIF way.... */
++                /* load the register table */
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  HOST_INT_STATUS_ADDRESS,
++                                  (A_UINT8 *)&pDev->IrqProcRegisters,
++                                  AR6K_IRQ_PROC_REGS_SIZE,
++                                  HIF_RD_SYNC_BYTE_INC,
++                                  NULL);
++
++            if (A_FAILED(status))
++                      {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n"));
++                break;
++            }
++
++                /* check for MBOX data and valid lookahead */
++            if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX))
++                      {
++                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX))
++                              {
++                    /* mailbox has a message and the look ahead is valid */
++                    *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
++                    break;
++                }
++            }
++
++        }
++
++        timeout--;
++
++        if (timeout <= 0)
++              {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n"));
++            status = A_ERROR;
++
++                /* check if the target asserted */
++            if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
++                    /* target signaled an assert, process this pending interrupt
++                     * this will call the target failure handler */
++                DevServiceDebugInterrupt(pDev);
++            }
++
++            break;
++        }
++
++            /* delay a little  */
++         msleep(DELAY_PER_INTERVAL_MS);
++         AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("  Retry Mbox Poll : %d \n",timeout));
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n"));
++
++    return status;
++}
++
++static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++    A_UINT8  cpu_int_status;
++    A_UINT8  regBuffer[4];
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n"));
++    cpu_int_status = pDev->IrqProcRegisters.cpu_int_status &
++                     pDev->IrqEnableRegisters.cpu_int_status_enable;
++    AR_DEBUG_ASSERT(cpu_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
++                    cpu_int_status));
++
++        /* Clear the interrupt */
++    pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */
++
++        /* set up the register transfer buffer to hit the register 4 times , this is done
++         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
++         * restrict bus transfer lengths to be a multiple of 4-bytes */
++
++        /* set W1C value to clear the interrupt, this hits the register first */
++    regBuffer[0] = cpu_int_status;
++        /* the remaining 4 values are set to zero which have no-effect  */
++    regBuffer[1] = 0;
++    regBuffer[2] = 0;
++    regBuffer[3] = 0;
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          CPU_INT_STATUS_ADDRESS,
++                          regBuffer,
++                          4,
++                          HIF_WR_SYNC_BYTE_FIX,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++
++static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev)
++{
++    A_STATUS status;
++    A_UINT8  error_int_status;
++    A_UINT8  regBuffer[4];
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n"));
++    error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F;
++    AR_DEBUG_ASSERT(error_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
++                    error_int_status));
++
++    if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) {
++        /* Wakeup */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n"));
++    }
++
++    if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) {
++        /* Rx Underflow */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n"));
++    }
++
++    if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) {
++        /* Tx Overflow */
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n"));
++    }
++
++        /* Clear the interrupt */
++    pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */
++
++        /* set up the register transfer buffer to hit the register 4 times , this is done
++         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
++         * restrict bus transfer lengths to be a multiple of 4-bytes */
++
++        /* set W1C value to clear the interrupt, this hits the register first */
++    regBuffer[0] = error_int_status;
++        /* the remaining 4 values are set to zero which have no-effect  */
++    regBuffer[1] = 0;
++    regBuffer[2] = 0;
++    regBuffer[3] = 0;
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          ERROR_INT_STATUS_ADDRESS,
++                          regBuffer,
++                          4,
++                          HIF_WR_SYNC_BYTE_FIX,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev)
++{
++    A_UINT32 dummy;
++    A_STATUS status;
++
++    /* Send a target failure event to the application */
++    AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n"));
++
++    if (pDev->TargetFailureCallback != NULL) {
++        pDev->TargetFailureCallback(pDev->HTCContext);
++    }
++
++    /* clear the interrupt , the debug error interrupt is
++     * counter 0 */
++        /* read counter to clear interrupt */
++    status = HIFReadWrite(pDev->HIFDevice,
++                          COUNT_DEC_ADDRESS,
++                          (A_UINT8 *)&dummy,
++                          4,
++                          HIF_RD_SYNC_BYTE_INC,
++                          NULL);
++
++    AR_DEBUG_ASSERT(status == A_OK);
++    return status;
++}
++
++static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev)
++{
++    A_UINT8 counter_int_status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n"));
++
++    counter_int_status = pDev->IrqProcRegisters.counter_int_status &
++                         pDev->IrqEnableRegisters.counter_int_status_enable;
++
++    AR_DEBUG_ASSERT(counter_int_status);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
++                    counter_int_status));
++
++    /* Check if the debug interrupt is pending */
++    if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
++        return DevServiceDebugInterrupt(pDev);
++    }
++
++    return A_OK;
++}
++
++/* callback when our fetch to get interrupt status registers completes */
++static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
++    A_UINT32    lookAhead = 0;
++    A_BOOL      otherInts = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    do {
++
++        if (A_FAILED(pPacket->Status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    (" GetEvents I/O request failed, status:%d \n", pPacket->Status));
++            /* bail out, don't unmask HIF interrupt */
++            break;
++        }
++
++        if (pDev->GetPendingEventsFunc != NULL) {
++                /* the HIF layer collected the information for us */
++            HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer;
++            if (pEvents->Events & HIF_RECV_MSG_AVAIL) {
++                lookAhead = pEvents->LookAhead;
++                if (0 == lookAhead) {
++                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n"));
++                }
++            }
++            if (pEvents->Events & HIF_OTHER_EVENTS) {
++                otherInts = TRUE;
++            }
++        } else {
++                /* standard interrupt table handling.... */
++            AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer;
++            A_UINT8                 host_int_status;
++
++            host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable;
++
++            if (host_int_status & (1 << HTC_MAILBOX)) {
++                host_int_status &= ~(1 << HTC_MAILBOX);
++                if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) {
++                        /* mailbox has a message and the look ahead is valid */
++                    lookAhead = pReg->rx_lookahead[HTC_MAILBOX];
++                    if (0 == lookAhead) {
++                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n"));
++                    }
++                }
++            }
++
++            if (host_int_status) {
++                    /* there are other interrupts to handle */
++                otherInts = TRUE;
++            }
++        }
++
++        if (otherInts || (lookAhead == 0)) {
++            /* if there are other interrupts to process, we cannot do this in the async handler so
++             * ack the interrupt which will cause our sync handler to run again
++             * if however there are no more messages, we can now ack the interrupt  */
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n",
++                otherInts, lookAhead));
++            HIFAckInterrupt(pDev->HIFDevice);
++        } else {
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                    (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n",
++                    lookAhead));
++                /* lookahead is non-zero and there are no other interrupts to service,
++                 * go get the next message */
++            pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL);
++        }
++
++    } while (FALSE);
++
++        /* free this IO packet */
++    AR6KFreeIOPacket(pDev,pPacket);
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n"));
++}
++
++/* called by the HTC layer when it wants us to check if the device has any more pending
++ * recv messages, this starts off a series of async requests to read interrupt registers  */
++A_STATUS DevCheckPendingRecvMsgsAsync(void *context)
++{
++    AR6K_DEVICE  *pDev = (AR6K_DEVICE *)context;
++    A_STATUS      status = A_OK;
++    HTC_PACKET   *pIOPacket;
++
++    /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can
++     * cause us to switch contexts */
++
++   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++   do {
++
++        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
++                /* break the async processing chain right here, no need to continue.
++                 * The DevDsrHandler() will handle things in a loop when things are driven
++                 * synchronously  */
++            break;
++        }
++            /* first allocate one of our HTC packets we created for async I/O
++             * we reuse HTC packet definitions so that we can use the completion mechanism
++             * in DevRWCompletionHandler() */
++        pIOPacket = AR6KAllocIOPacket(pDev);
++
++        if (NULL == pIOPacket) {
++                /* there should be only 1 asynchronous request out at a time to read these registers
++                 * so this should actually never happen */
++            status = A_NO_MEMORY;
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* stick in our completion routine when the I/O operation completes */
++        pIOPacket->Completion = DevGetEventAsyncHandler;
++        pIOPacket->pContext = pDev;
++
++        if (pDev->GetPendingEventsFunc) {
++                /* HIF layer has it's own mechanism, pass the IO to it.. */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                                (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer,
++                                                pIOPacket);
++
++        } else {
++                /* standard way, read the interrupt register table asynchronously again */
++            status = HIFReadWrite(pDev->HIFDevice,
++                                  HOST_INT_STATUS_ADDRESS,
++                                  pIOPacket->pBuffer,
++                                  AR6K_IRQ_PROC_REGS_SIZE,
++                                  HIF_RD_ASYNC_BYTE_INC,
++                                  pIOPacket);
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n"));
++   } while (FALSE);
++
++   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n"));
++
++   return status;
++}
++
++/* process pending interrupts synchronously */
++static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing)
++{
++    A_STATUS    status = A_OK;
++    A_UINT8     host_int_status = 0;
++    A_UINT32    lookAhead = 0;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++    /*** NOTE: the HIF implementation guarantees that the context of this call allows
++     *         us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that
++     *         can block or switch thread/task ontexts.
++     *         This is a fully schedulable context.
++     * */
++    do {
++
++        if (pDev->GetPendingEventsFunc != NULL) {
++            HIF_PENDING_EVENTS_INFO events;
++
++                /* the HIF layer uses a special mechanism to get events
++                 * get this synchronously  */
++            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
++                                                &events,
++                                                NULL);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++            if (events.Events & HIF_RECV_MSG_AVAIL) {
++                lookAhead = events.LookAhead;
++                if (0 == lookAhead) {
++                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n"));
++                }
++            }
++
++            if (!(events.Events & HIF_OTHER_EVENTS) ||
++                !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) {
++                    /* no need to read the register table, no other interesting interrupts.
++                     * Some interfaces (like SPI) can shadow interrupt sources without
++                     * requiring the host to do a full table read */
++                break;
++            }
++
++            /* otherwise fall through and read the register table */
++        }
++
++        /*
++         * Read the first 28 bytes of the HTC register table. This will yield us
++         * the value of different int status registers and the lookahead
++         * registers.
++         *    length = sizeof(int_status) + sizeof(cpu_int_status) +
++         *             sizeof(error_int_status) + sizeof(counter_int_status) +
++         *             sizeof(mbox_frame) + sizeof(rx_lookahead_valid) +
++         *             sizeof(hole) +  sizeof(rx_lookahead) +
++         *             sizeof(int_status_enable) + sizeof(cpu_int_status_enable) +
++         *             sizeof(error_status_enable) +
++         *             sizeof(counter_int_status_enable);
++         *
++        */
++        status = HIFReadWrite(pDev->HIFDevice,
++                              HOST_INT_STATUS_ADDRESS,
++                              (A_UINT8 *)&pDev->IrqProcRegisters,
++                              AR6K_IRQ_PROC_REGS_SIZE,
++                              HIF_RD_SYNC_BYTE_INC,
++                              NULL);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) {
++            DevDumpRegisters(&pDev->IrqProcRegisters,
++                             &pDev->IrqEnableRegisters);
++        }
++
++            /* Update only those registers that are enabled */
++        host_int_status = pDev->IrqProcRegisters.host_int_status &
++                          pDev->IrqEnableRegisters.int_status_enable;
++
++        if (NULL == pDev->GetPendingEventsFunc) {
++                /* only look at mailbox status if the HIF layer did not provide this function,
++                 * on some HIF interfaces reading the RX lookahead is not valid to do */
++            if (host_int_status & (1 << HTC_MAILBOX)) {
++                    /* mask out pending mailbox value, we use "lookAhead" as the real flag for
++                     * mailbox processing below */
++                host_int_status &= ~(1 << HTC_MAILBOX);
++                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) {
++                        /* mailbox has a message and the look ahead is valid */
++                    lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
++                    if (0 == lookAhead) {
++                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n"));
++                    }
++                }
++            }
++        } else {
++                /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/
++            host_int_status &= ~(1 << HTC_MAILBOX);
++        }
++
++    } while (FALSE);
++
++
++    do {
++
++            /* did the interrupt status fetches succeed? */
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if ((0 == host_int_status) && (0 == lookAhead)) {
++                /* nothing to process, the caller can use this to break out of a loop */
++            *pDone = TRUE;
++            break;
++        }
++
++        if (lookAhead != 0) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead));
++                /* Mailbox Interrupt, the HTC layer may issue async requests to empty the
++                 * mailbox...
++                 * When emptying the recv mailbox we use the async handler above called from the
++                 * completion routine of the callers read request. This can improve performance
++                 * by reducing context switching when we rapidly pull packets */
++            status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing);
++            if (A_FAILED(status)) {
++                break;
++            }
++        }
++
++            /* now handle the rest of them */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
++                            (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n",
++                            host_int_status));
++
++        if (HOST_INT_STATUS_CPU_GET(host_int_status)) {
++                /* CPU Interrupt */
++            status = DevServiceCPUInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++        if (HOST_INT_STATUS_ERROR_GET(host_int_status)) {
++                /* Error Interrupt */
++            status = DevServiceErrorInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++        if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) {
++                /* Counter Interrupt */
++            status = DevServiceCounterInterrupt(pDev);
++            if (A_FAILED(status)){
++                break;
++            }
++        }
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n",
++                *pDone, *pASyncProcessing, status));
++
++    return status;
++}
++
++
++/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/
++A_STATUS DevDsrHandler(void *context)
++{
++    AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
++    A_STATUS    status = A_OK;
++    A_BOOL      done = FALSE;
++    A_BOOL      asyncProc = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
++
++
++    while (!done) {
++        status = ProcessPendingIRQs(pDev, &done, &asyncProc);
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
++            /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */
++            asyncProc = FALSE;
++            /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers.
++             * this has a nice side effect of blocking us until all async read requests are completed.
++             * This behavior is required on some HIF implementations that do not allow ASYNC
++             * processing in interrupt handlers (like Windows CE) */
++        }
++
++        if (asyncProc) {
++                /* the function performed some async I/O for performance, we
++                   need to exit the ISR immediately, the check below will prevent the interrupt from being
++                   Ack'd while we handle it asynchronously */
++            break;
++        }
++
++    }
++
++    if (A_SUCCESS(status) && !asyncProc) {
++            /* Ack the interrupt only if :
++             *  1. we did not get any errors in processing interrupts
++             *  2. there are no outstanding async processing requests */
++        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n"));
++        HIFAckInterrupt(pDev->HIFDevice);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n"));
++    return A_OK;
++}
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/ar6k.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/ar6k.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,191 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef AR6K_H_
++#define AR6K_H_
++
++#define AR6K_MAILBOXES 4
++
++/* HTC runs over mailbox 0 */
++#define HTC_MAILBOX          0
++
++#define AR6K_TARGET_DEBUG_INTR_MASK     0x01
++
++#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK |   \
++                            INT_STATUS_ENABLE_CPU_MASK   |   \
++                            INT_STATUS_ENABLE_COUNTER_MASK)
++
++//#define MBOXHW_UNIT_TEST 1
++
++#include "athstartpack.h"
++typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS {
++    A_UINT8                      host_int_status;
++    A_UINT8                      cpu_int_status;
++    A_UINT8                      error_int_status;
++    A_UINT8                      counter_int_status;
++    A_UINT8                      mbox_frame;
++    A_UINT8                      rx_lookahead_valid;
++    A_UINT8                      hole[2];
++    A_UINT32                     rx_lookahead[2];
++} POSTPACK AR6K_IRQ_PROC_REGISTERS;
++
++#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS)
++
++
++
++typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS {
++    A_UINT8                      int_status_enable;
++    A_UINT8                      cpu_int_status_enable;
++    A_UINT8                      error_status_enable;
++    A_UINT8                      counter_int_status_enable;
++} POSTPACK AR6K_IRQ_ENABLE_REGISTERS;
++
++#include "athendpack.h"
++
++#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS)
++
++#define AR6K_REG_IO_BUFFER_SIZE     32
++#define AR6K_MAX_REG_IO_BUFFERS     8
++
++/* buffers for ASYNC I/O */
++typedef struct AR6K_ASYNC_REG_IO_BUFFER {
++    HTC_PACKET    HtcPacket;   /* we use an HTC packet as a wrapper for our async register-based I/O */
++    A_UINT8       Buffer[AR6K_REG_IO_BUFFER_SIZE];
++} AR6K_ASYNC_REG_IO_BUFFER;
++
++typedef struct _AR6K_DEVICE {
++    A_MUTEX_T                   Lock;
++    AR6K_IRQ_PROC_REGISTERS     IrqProcRegisters;
++    AR6K_IRQ_ENABLE_REGISTERS   IrqEnableRegisters;
++    void                        *HIFDevice;
++    A_UINT32                    BlockSize;
++    A_UINT32                    BlockMask;
++    A_UINT32                    MailboxAddress;
++    HIF_PENDING_EVENTS_FUNC     GetPendingEventsFunc;
++    void                        *HTCContext;
++    HTC_PACKET_QUEUE            RegisterIOList;
++    AR6K_ASYNC_REG_IO_BUFFER    RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS];
++    void                        (*TargetFailureCallback)(void *Context);
++    A_STATUS                    (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
++    HIF_DEVICE_IRQ_PROCESSING_MODE  HifIRQProcessingMode;
++    HIF_MASK_UNMASK_RECV_EVENT      HifMaskUmaskRecvEvent;
++} AR6K_DEVICE;
++
++#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY)
++
++A_STATUS DevSetup(AR6K_DEVICE *pDev);
++A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev);
++A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev);
++A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
++                            A_UINT32    *pLookAhead,
++                            int          TimeoutMS);
++A_STATUS DevRWCompletionHandler(void *context, A_STATUS status);
++A_STATUS DevDsrHandler(void *context);
++A_STATUS DevCheckPendingRecvMsgsAsync(void *context);
++void     DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
++                          AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs);
++
++#define DEV_STOP_RECV_ASYNC TRUE
++#define DEV_STOP_RECV_SYNC  FALSE
++#define DEV_ENABLE_RECV_ASYNC TRUE
++#define DEV_ENABLE_RECV_SYNC  FALSE
++A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
++A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
++
++static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) {
++    A_UINT32 paddedLength;
++    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
++    A_STATUS status;
++
++       /* adjust the length to be a multiple of block size if appropriate */
++    paddedLength = (SendLength + (pDev->BlockMask)) &
++                    (~(pDev->BlockMask));
++#if 0 // BufferLength may not be set in , fix this...
++    if (paddedLength > pPacket->BufferLength) {
++        AR_DEBUG_ASSERT(FALSE);
++        if (pPacket->Completion != NULL) {
++            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
++        }
++        return A_EINVAL;
++    }
++#endif
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
++                paddedLength,
++                pDev->MailboxAddress,
++                sync ? "SYNC" : "ASYNC"));
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          pDev->MailboxAddress,
++                          pPacket->pBuffer,
++                          paddedLength,     /* the padded length */
++                          sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC,
++                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
++
++    if (sync) {
++        pPacket->Status = status;
++    }
++
++    return status;
++}
++
++static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) {
++    A_UINT32 paddedLength;
++    A_STATUS status;
++    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
++
++        /* adjust the length to be a multiple of block size if appropriate */
++    paddedLength = (RecvLength + (pDev->BlockMask)) &
++                    (~(pDev->BlockMask));
++    if (paddedLength > pPacket->BufferLength) {
++        AR_DEBUG_ASSERT(FALSE);
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n",
++                    paddedLength,RecvLength,pPacket->BufferLength));
++        if (pPacket->Completion != NULL) {
++            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
++        }
++        return A_EINVAL;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
++                paddedLength,
++                pDev->MailboxAddress,
++                sync ? "SYNC" : "ASYNC"));
++
++    status = HIFReadWrite(pDev->HIFDevice,
++                          pDev->MailboxAddress,
++                          pPacket->pBuffer,
++                          paddedLength,
++                          sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC,
++                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
++
++    if (sync) {
++        pPacket->Status = status;
++    }
++
++    return status;
++}
++
++#ifdef MBOXHW_UNIT_TEST
++A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev);
++#endif
++
++#endif /*AR6K_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,508 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++
++static HTC_INIT_INFO  HTCInitInfo = {NULL,NULL,NULL};
++static A_BOOL         HTCInitialized = FALSE;
++
++static A_STATUS HTCTargetInsertedHandler(void *hif_handle);
++static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status);
++static void HTCReportFailure(void *Context);
++
++/* Initializes the HTC layer */
++A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo)
++{
++    HTC_CALLBACKS htcCallbacks;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n"));
++    if (HTCInitialized) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
++        return A_OK;
++    }
++
++    A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO));
++
++    A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS));
++
++        /* setup HIF layer callbacks */
++    htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler;
++    htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler;
++        /* the device layer handles these */
++    htcCallbacks.rwCompletionHandler = DevRWCompletionHandler;
++    htcCallbacks.dsrHandler = DevDsrHandler;
++    HIFInit(&htcCallbacks);
++    HTCInitialized = TRUE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
++    return A_OK;
++}
++
++void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList)
++{
++    LOCK_HTC(target);
++    HTC_PACKET_ENQUEUE(pList,pPacket);
++    UNLOCK_HTC(target);
++}
++
++HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target,  HTC_PACKET_QUEUE *pList)
++{
++    HTC_PACKET *pPacket;
++
++    LOCK_HTC(target);
++    pPacket = HTC_PACKET_DEQUEUE(pList);
++    UNLOCK_HTC(target);
++
++    return pPacket;
++}
++
++/* cleanup the HTC instance */
++static void HTCCleanup(HTC_TARGET *target)
++{
++    if (A_IS_MUTEX_VALID(&target->HTCLock)) {
++        A_MUTEX_DELETE(&target->HTCLock);
++    }
++
++    if (A_IS_MUTEX_VALID(&target->HTCRxLock)) {
++        A_MUTEX_DELETE(&target->HTCRxLock);
++    }
++
++    if (A_IS_MUTEX_VALID(&target->HTCTxLock)) {
++        A_MUTEX_DELETE(&target->HTCTxLock);
++    }
++        /* free our instance */
++    A_FREE(target);
++}
++
++/* registered target arrival callback from the HIF layer */
++static A_STATUS HTCTargetInsertedHandler(void *hif_handle)
++{
++    HTC_TARGET              *target = NULL;
++    A_STATUS                 status;
++    int                      i;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n"));
++
++    do {
++
++            /* allocate target memory */
++        if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n"));
++            status = A_ERROR;
++            break;
++        }
++
++        A_MEMZERO(target, sizeof(HTC_TARGET));
++        A_MUTEX_INIT(&target->HTCLock);
++        A_MUTEX_INIT(&target->HTCRxLock);
++        A_MUTEX_INIT(&target->HTCTxLock);
++        INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList);
++        INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList);
++
++            /* give device layer the hif device handle */
++        target->Device.HIFDevice = hif_handle;
++            /* give the device layer our context (for event processing)
++             * the device layer will register it's own context with HIF
++             * so we need to set this so we can fetch it in the target remove handler */
++        target->Device.HTCContext = target;
++            /* set device layer target failure callback */
++        target->Device.TargetFailureCallback = HTCReportFailure;
++            /* set device layer recv message pending callback */
++        target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler;
++        target->EpWaitingForBuffers = ENDPOINT_MAX;
++
++            /* setup device layer */
++        status = DevSetup(&target->Device);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* carve up buffers/packets for control messages */
++        for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) {
++            HTC_PACKET *pControlPacket;
++            pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
++            SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket,
++                                          target,
++                                          target->HTCControlBuffers[i].Buffer,
++                                          HTC_CONTROL_BUFFER_SIZE,
++                                          ENDPOINT_0);
++            HTC_FREE_CONTROL_RX(target,pControlPacket);
++        }
++
++        for (;i < NUM_CONTROL_BUFFERS;i++) {
++             HTC_PACKET *pControlPacket;
++             pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
++             INIT_HTC_PACKET_INFO(pControlPacket,
++                                  target->HTCControlBuffers[i].Buffer,
++                                  HTC_CONTROL_BUFFER_SIZE);
++             HTC_FREE_CONTROL_TX(target,pControlPacket);
++        }
++
++    } while (FALSE);
++
++    if (A_SUCCESS(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n"));
++            /* announce ourselves */
++        HTCInitInfo.AddInstance((HTC_HANDLE)target);
++    } else {
++        if (target != NULL) {
++            HTCCleanup(target);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n"));
++
++    return status;
++}
++
++/* registered removal callback from the HIF layer */
++static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status)
++{
++    HTC_TARGET *target;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle));
++
++    if (NULL == handle) {
++            /* this could be NULL in the event that target initialization failed */
++        return A_OK;
++    }
++
++    target = ((AR6K_DEVICE *)handle)->HTCContext;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("   removing target:0x%X instance:0x%X ... \n",
++            (A_UINT32)target, (A_UINT32)target->pInstanceContext));
++
++    if (target->pInstanceContext != NULL) {
++            /* let upper layer know, it needs to call HTCStop() */
++        HTCInitInfo.DeleteInstance(target->pInstanceContext);
++    }
++
++    HIFShutDownDevice(target->Device.HIFDevice);
++
++    HTCCleanup(target);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n"));
++    return A_OK;
++}
++
++/* get the low level HIF device for the caller , the caller may wish to do low level
++ * HIF requests */
++void *HTCGetHifDevice(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    return target->Device.HIFDevice;
++}
++
++/* set the instance block for this HTC handle, so that on removal, the blob can be
++ * returned to the caller */
++void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance)
++{
++    HTC_TARGET  *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++
++    target->pInstanceContext = Instance;
++}
++
++/* wait for the target to arrive (sends HTC Ready message)
++ * this operation is fully synchronous and the message is polled for */
++A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET              *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_STATUS                 status;
++    HTC_PACKET              *pPacket = NULL;
++    HTC_READY_MSG           *pRdyMsg;
++    HTC_SERVICE_CONNECT_REQ  connect;
++    HTC_SERVICE_CONNECT_RESP resp;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target));
++
++    do {
++
++#ifdef MBOXHW_UNIT_TEST
++
++        status = DoMboxHWTest(&target->Device);
++
++        if (status != A_OK) {
++            break;
++        }
++
++#endif
++
++            /* we should be getting 1 control message that the target is ready */
++        status = HTCWaitforControlMessage(target, &pPacket);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n"));
++            break;
++        }
++
++            /* we controlled the buffer creation so it has to be properly aligned */
++        pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer;
++
++        if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) ||
++            (pPacket->ActualLength < sizeof(HTC_READY_MSG))) {
++                /* this message is not valid */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) {
++              /* this message is not valid */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        target->TargetCredits = pRdyMsg->CreditCount;
++        target->TargetCreditSize = pRdyMsg->CreditSize;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n",
++                target->TargetCredits, target->TargetCreditSize));
++
++            /* setup our pseudo HTC control endpoint connection */
++        A_MEMZERO(&connect,sizeof(connect));
++        A_MEMZERO(&resp,sizeof(resp));
++        connect.EpCallbacks.pContext = target;
++        connect.EpCallbacks.EpTxComplete = HTCControlTxComplete;
++        connect.EpCallbacks.EpRecv = HTCControlRecv;
++        connect.EpCallbacks.EpRecvRefill = NULL;  /* not needed */
++        connect.EpCallbacks.EpSendFull = NULL;    /* not needed */
++        connect.EpCallbacks.EpSendAvail = NULL;   /* not needed */
++        connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS;
++        connect.ServiceID = HTC_CTRL_RSVD_SVC;
++
++            /* connect fake service */
++        status = HTCConnectService((HTC_HANDLE)target,
++                                   &connect,
++                                   &resp);
++
++        if (!A_FAILED(status)) {
++            break;
++        }
++
++    } while (FALSE);
++
++    if (pPacket != NULL) {
++        HTC_FREE_CONTROL_RX(target,pPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n"));
++
++    return status;
++}
++
++
++
++/* Start HTC, enable interrupts and let the target know host has finished setup */
++A_STATUS HTCStart(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_PACKET *pPacket;
++    A_STATUS   status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n"));
++
++        /* now that we are starting, push control receive buffers into the
++         * HTC control endpoint */
++
++    while (1) {
++        pPacket = HTC_ALLOC_CONTROL_RX(target);
++        if (NULL == pPacket) {
++            break;
++        }
++        HTCAddReceivePkt((HTC_HANDLE)target,pPacket);
++    }
++
++    do {
++
++        AR_DEBUG_ASSERT(target->InitCredits != NULL);
++        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL);
++        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL);
++
++            /* call init credits callback to do the distribution ,
++             * NOTE: the first entry in the distribution list is ENDPOINT_0, so
++             * we pass the start of the list after this one. */
++        target->InitCredits(target->pCredDistContext,
++                            target->EpCreditDistributionListHead->pNext,
++                            target->TargetCredits);
++
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) {
++            DumpCreditDistStates(target);
++        }
++
++            /* the caller is done connecting to services, so we can indicate to the
++            * target that the setup phase is complete */
++        status = HTCSendSetupComplete(target);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* unmask interrupts */
++        status = DevUnmaskInterrupts(&target->Device);
++
++        if (A_FAILED(status)) {
++            HTCStop(target);
++        }
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n"));
++    return status;
++}
++
++
++/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */
++void HTCStop(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n"));
++
++        /* mark that we are shutting down .. */
++    target->HTCStateFlags |= HTC_STATE_STOPPING;
++
++        /* Masking interrupts is a synchronous operation, when this function returns
++         * all pending HIF I/O has completed, we can safely flush the queues */
++    DevMaskInterrupts(&target->Device);
++
++        /* flush all send packets */
++    HTCFlushSendPkts(target);
++        /* flush all recv buffers */
++    HTCFlushRecvBuffers(target);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n"));
++}
++
++/* undo what was done in HTCInit() */
++void HTCShutDown(void)
++{
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n"));
++    HTCInitialized = FALSE;
++        /* undo HTCInit */
++    HIFShutDownDevice(NULL);
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n"));
++}
++
++void HTCDumpCreditStates(HTC_HANDLE HTCHandle)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++
++    LOCK_HTC_TX(target);
++
++    DumpCreditDistStates(target);
++
++    UNLOCK_HTC_TX(target);
++}
++
++/* report a target failure from the device, this is a callback from the device layer
++ * which uses a mechanism to report errors from the target (i.e. special interrupts) */
++static void HTCReportFailure(void *Context)
++{
++    HTC_TARGET *target = (HTC_TARGET *)Context;
++
++    target->TargetFailure = TRUE;
++
++    if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) {
++            /* let upper layer know, it needs to call HTCStop() */
++        HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR);
++    }
++}
++
++void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription)
++{
++    A_CHAR stream[60];
++    A_UINT32 i;
++    A_UINT16 offset, count;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription));
++
++    count = 0;
++    offset = 0;
++    for(i = 0; i < length; i++) {
++        sprintf(stream + offset, "%2.2X ", buffer[i]);
++        count ++;
++        offset += 3;
++
++        if(count == 16) {
++            count = 0;
++            offset = 0;
++            AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
++            A_MEMZERO(stream, 60);
++        }
++    }
++
++    if(offset != 0) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n"));
++}
++
++A_BOOL HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
++                                HTC_ENDPOINT_ID          Endpoint,
++                                HTC_ENDPOINT_STAT_ACTION Action,
++                                HTC_ENDPOINT_STATS       *pStats)
++{
++
++#ifdef HTC_EP_STAT_PROFILING
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_BOOL     clearStats = FALSE;
++    A_BOOL     sample = FALSE;
++
++    switch (Action) {
++        case HTC_EP_STAT_SAMPLE :
++            sample = TRUE;
++            break;
++        case HTC_EP_STAT_SAMPLE_AND_CLEAR :
++            sample = TRUE;
++            clearStats = TRUE;
++            break;
++        case HTC_EP_STAT_CLEAR :
++            clearStats = TRUE;
++            break;
++        default:
++            break;
++    }
++
++    A_ASSERT(Endpoint < ENDPOINT_MAX);
++
++        /* lock out TX and RX while we sample and/or clear */
++    LOCK_HTC_TX(target);
++    LOCK_HTC_RX(target);
++
++    if (sample) {
++        A_ASSERT(pStats != NULL);
++            /* return the stats to the caller */
++        A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
++    }
++
++    if (clearStats) {
++            /* reset stats */
++        A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
++    }
++
++    UNLOCK_HTC_RX(target);
++    UNLOCK_HTC_TX(target);
++
++    return TRUE;
++#else
++    return FALSE;
++#endif
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_debug.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_debug.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_debug.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_debug.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,65 @@
++#ifndef HTC_DEBUG_H_
++#define HTC_DEBUG_H_
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/* ------- Debug related stuff ------- */
++enum {
++    ATH_DEBUG_SEND = 0x0001,
++    ATH_DEBUG_RECV = 0x0002,
++    ATH_DEBUG_SYNC = 0x0004,
++    ATH_DEBUG_DUMP = 0x0008,
++    ATH_DEBUG_IRQ  = 0x0010,
++    ATH_DEBUG_TRC  = 0x0020,
++    ATH_DEBUG_WARN = 0x0040,
++    ATH_DEBUG_ERR  = 0x0080,
++    ATH_DEBUG_ANY  = 0xFFFF,
++};
++
++#ifdef DEBUG
++
++// TODO FIX usage of A_PRINTF!
++#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
++#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
++    if (debughtc & ATH_DEBUG_DUMP) {             \
++        DebugDumpBytes(buffer, length,desc);               \
++    }                                            \
++} while(0)
++#define PRINTX_ARG(arg...) arg
++#define AR_DEBUG_PRINTF(flags, args) do {        \
++    if (debughtc & (flags)) {                    \
++        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
++    }                                            \
++} while (0)
++#define AR_DEBUG_ASSERT(test) do {               \
++    if (!(test)) {                               \
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
++    }                                            \
++} while(0)
++extern int debughtc;
++#else
++#define AR_DEBUG_PRINTF(flags, args)
++#define AR_DEBUG_PRINTBUF(buffer, length, desc)
++#define AR_DEBUG_ASSERT(test)
++#define AR_DEBUG_LVL_CHECK(lvl) 0
++#endif
++
++void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
++
++#endif /*HTC_DEBUG_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_internal.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_internal.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_internal.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_internal.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,168 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _HTC_INTERNAL_H_
++#define _HTC_INTERNAL_H_
++
++/* for debugging, uncomment this to capture the last frame header, on frame header
++ * processing errors, the last frame header is dump for comparison */
++//#define HTC_CAPTURE_LAST_FRAME
++
++//#define HTC_EP_STAT_PROFILING
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "htc.h"
++#include "htc_api.h"
++#include "bmi_msg.h"
++#include "hif.h"
++#include "ar6k.h"
++
++/* HTC operational parameters */
++#define HTC_TARGET_RESPONSE_TIMEOUT        2000 /* in ms */
++#define HTC_TARGET_DEBUG_INTR_MASK         0x01
++#define HTC_TARGET_CREDIT_INTR_MASK        0xF0
++
++typedef struct _HTC_ENDPOINT {
++    HTC_SERVICE_ID              ServiceID;      /* service ID this endpoint is bound to
++                                                   non-zero value means this endpoint is in use */
++    HTC_PACKET_QUEUE            TxQueue;        /* HTC frame buffer TX queue */
++    HTC_PACKET_QUEUE            RxBuffers;      /* HTC frame buffer RX list */
++    HTC_ENDPOINT_CREDIT_DIST    CreditDist;     /* credit distribution structure (exposed to driver layer) */
++    HTC_EP_CALLBACKS            EpCallBacks;    /* callbacks associated with this endpoint */
++    int                         MaxTxQueueDepth;   /* max depth of the TX queue before we need to
++                                                      call driver's full handler */
++    int                         CurrentTxQueueDepth; /* current TX queue depth */
++    int                         MaxMsgLength;        /* max length of endpoint message */
++#ifdef HTC_EP_STAT_PROFILING
++    HTC_ENDPOINT_STATS          EndPointStats;  /* endpoint statistics */
++#endif
++} HTC_ENDPOINT;
++
++#ifdef HTC_EP_STAT_PROFILING
++#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count);
++#else
++#define INC_HTC_EP_STAT(p,stat,count)
++#endif
++
++#define HTC_SERVICE_TX_PACKET_TAG  HTC_TX_PACKET_TAG_INTERNAL
++
++#define NUM_CONTROL_BUFFERS     8
++#define NUM_CONTROL_TX_BUFFERS  2
++#define NUM_CONTROL_RX_BUFFERS  (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS)
++
++#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH)
++
++typedef struct HTC_CONTROL_BUFFER {
++    HTC_PACKET    HtcPacket;
++    A_UINT8       Buffer[HTC_CONTROL_BUFFER_SIZE];
++} HTC_CONTROL_BUFFER;
++
++/* our HTC target state */
++typedef struct _HTC_TARGET {
++    HTC_ENDPOINT                EndPoint[ENDPOINT_MAX];
++    HTC_CONTROL_BUFFER          HTCControlBuffers[NUM_CONTROL_BUFFERS];
++    HTC_ENDPOINT_CREDIT_DIST   *EpCreditDistributionListHead;
++    HTC_PACKET_QUEUE            ControlBufferTXFreeList;
++    HTC_PACKET_QUEUE            ControlBufferRXFreeList;
++    HTC_CREDIT_DIST_CALLBACK    DistributeCredits;
++    HTC_CREDIT_INIT_CALLBACK    InitCredits;
++    void                       *pCredDistContext;
++    int                         TargetCredits;
++    int                         TargetCreditSize;
++    A_MUTEX_T                   HTCLock;
++    A_MUTEX_T                   HTCRxLock;
++    A_MUTEX_T                   HTCTxLock;
++    AR6K_DEVICE                 Device;         /* AR6K - specific state */
++    A_UINT32                    HTCStateFlags;
++    HTC_ENDPOINT_ID             EpWaitingForBuffers;
++    A_BOOL                      TargetFailure;
++    void                       *pInstanceContext;
++#define HTC_STATE_WAIT_BUFFERS  (1 << 0)
++#define HTC_STATE_STOPPING      (1 << 1)
++#ifdef HTC_CAPTURE_LAST_FRAME
++    HTC_FRAME_HDR               LastFrameHdr;  /* useful for debugging */
++    A_UINT8                     LastTrailer[256];
++    A_UINT8                     LastTrailerLength;
++#endif
++} HTC_TARGET;
++
++#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING)
++#define LOCK_HTC(t)      A_MUTEX_LOCK(&(t)->HTCLock);
++#define UNLOCK_HTC(t)    A_MUTEX_UNLOCK(&(t)->HTCLock);
++#define LOCK_HTC_RX(t)   A_MUTEX_LOCK(&(t)->HTCRxLock);
++#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock);
++#define LOCK_HTC_TX(t)   A_MUTEX_LOCK(&(t)->HTCTxLock);
++#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock);
++
++#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd))
++#define HTC_RECYCLE_RX_PKT(target,p)                \
++{                                                   \
++    HTC_PACKET_RESET_RX(pPacket);                   \
++    HTCAddReceivePkt((HTC_HANDLE)(target),(p));     \
++}
++
++/* internal HTC functions */
++void        HTCControlTxComplete(void *Context, HTC_PACKET *pPacket);
++void        HTCControlRecv(void *Context, HTC_PACKET *pPacket);
++A_STATUS    HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket);
++HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList);
++void        HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList);
++A_STATUS    HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags);
++A_STATUS    HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket);
++void        HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket);
++A_STATUS    HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
++void        HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint);
++A_STATUS    HTCSendSetupComplete(HTC_TARGET *target);
++void        HTCFlushRecvBuffers(HTC_TARGET *target);
++void        HTCFlushSendPkts(HTC_TARGET *target);
++void        DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist);
++void        DumpCreditDistStates(HTC_TARGET *target);
++void          DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
++
++static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) {
++    HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList);
++    if (pPacket != NULL) {
++            /* set payload pointer area with some headroom */
++        pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH;
++    }
++    return pPacket;
++}
++
++#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList)
++#define HTC_ALLOC_CONTROL_RX(t)  HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList)
++#define HTC_FREE_CONTROL_RX(t,p) \
++{                                                                \
++    HTC_PACKET_RESET_RX(p);                                      \
++    HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \
++}
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HTC_INTERNAL_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_recv.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_recv.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_recv.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_recv.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,703 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++#define HTCIssueRecv(t, p) \
++    DevRecvPacket(&(t)->Device,  \
++                  (p),          \
++                  (p)->ActualLength)
++
++#define DO_RCV_COMPLETION(t,p,e)            \
++{                                           \
++    if ((p)->ActualLength > 0) {            \
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \
++            (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint));  \
++        (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext,      \
++                                (p));                           \
++    } else {                                                    \
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n"));  \
++        HTC_RECYCLE_RX_PKT((t), (p));                           \
++    }                                                           \
++}
++
++#ifdef HTC_EP_STAT_PROFILING
++#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)            \
++{                                                      \
++    LOCK_HTC_RX((t));                                  \
++    INC_HTC_EP_STAT((ep), RxReceived, 1);              \
++    if ((lookAhead) != 0) {                            \
++        INC_HTC_EP_STAT((ep), RxLookAheads, 1);        \
++    }                                                  \
++    UNLOCK_HTC_RX((t));                                \
++}
++#else
++#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)
++#endif
++
++static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target,
++                                         A_UINT8    *pBuffer,
++                                         int         Length,
++                                         A_UINT32   *pNextLookAhead,
++                                         HTC_ENDPOINT_ID FromEndpoint)
++{
++    HTC_RECORD_HDR          *pRecord;
++    A_UINT8                 *pRecordBuf;
++    HTC_LOOKAHEAD_REPORT    *pLookAhead;
++    A_UINT8                 *pOrigBuffer;
++    int                     origLength;
++    A_STATUS                status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length));
++
++    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++        AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer");
++    }
++
++    pOrigBuffer = pBuffer;
++    origLength = Length;
++    status = A_OK;
++
++    while (Length > 0) {
++
++        if (Length < sizeof(HTC_RECORD_HDR)) {
++            status = A_EPROTO;
++            break;
++        }
++            /* these are byte aligned structs */
++        pRecord = (HTC_RECORD_HDR *)pBuffer;
++        Length -= sizeof(HTC_RECORD_HDR);
++        pBuffer += sizeof(HTC_RECORD_HDR);
++
++        if (pRecord->Length > Length) {
++                /* no room left in buffer for record */
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" invalid record length: %d (id:%d) buffer has: %d bytes left \n",
++                        pRecord->Length, pRecord->RecordID, Length));
++            status = A_EPROTO;
++            break;
++        }
++            /* start of record follows the header */
++        pRecordBuf = pBuffer;
++
++        switch (pRecord->RecordID) {
++            case HTC_RECORD_CREDITS:
++                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT));
++                HTCProcessCreditRpt(target,
++                                    (HTC_CREDIT_REPORT *)pRecordBuf,
++                                    pRecord->Length / (sizeof(HTC_CREDIT_REPORT)),
++                                    FromEndpoint);
++                break;
++            case HTC_RECORD_LOOKAHEAD:
++                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT));
++                pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf;
++                if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) &&
++                    (pNextLookAhead != NULL)) {
++
++                    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                                (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n",
++                                pLookAhead->PreValid,
++                                pLookAhead->PostValid));
++
++                        /* look ahead bytes are valid, copy them over */
++                    ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0];
++                    ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1];
++                    ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2];
++                    ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3];
++
++                    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++                        DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead");
++                    }
++                }
++                break;
++            default:
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n",
++                        pRecord->RecordID, pRecord->Length));
++                break;
++        }
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* advance buffer past this record for next time around */
++        pBuffer += pRecord->Length;
++        Length -= pRecord->Length;
++    }
++
++    if (A_FAILED(status)) {
++        DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer");
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n"));
++    return status;
++
++}
++
++/* process a received message (i.e. strip off header, process any trailer data)
++ * note : locks must be released when this function is called */
++static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead)
++{
++    A_UINT8   temp;
++    A_UINT8   *pBuf;
++    A_STATUS  status = A_OK;
++    A_UINT16  payloadLen;
++    A_UINT32  lookAhead;
++
++    pBuf = pPacket->pBuffer;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n"));
++
++    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++        AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT");
++    }
++
++    do {
++        /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to
++         * retrieve 16 bit fields */
++        payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen);
++
++        ((A_UINT8 *)&lookAhead)[0] = pBuf[0];
++        ((A_UINT8 *)&lookAhead)[1] = pBuf[1];
++        ((A_UINT8 *)&lookAhead)[2] = pBuf[2];
++        ((A_UINT8 *)&lookAhead)[3] = pBuf[3];
++
++        if (lookAhead != pPacket->HTCReserved) {
++            /* somehow the lookahead that gave us the full read length did not
++             * reflect the actual header in the pending message */
++             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCProcessRecvHeader, lookahead mismatch! \n"));
++             DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead");
++             DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header");
++#ifdef HTC_CAPTURE_LAST_FRAME
++            DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header");
++            if (target->LastTrailerLength != 0) {
++                DebugDumpBytes(target->LastTrailer,
++                               target->LastTrailerLength,
++                               "Last trailer");
++            }
++#endif
++            status = A_EPROTO;
++            break;
++        }
++
++            /* get flags */
++        temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags);
++
++        if (temp & HTC_FLAGS_RECV_TRAILER) {
++            /* this packet has a trailer */
++
++                /* extract the trailer length in control byte 0 */
++            temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]);
++
++            if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n",
++                        payloadLen, temp));
++                status = A_EPROTO;
++                break;
++            }
++
++                /* process trailer data that follows HDR + application payload */
++            status = HTCProcessTrailer(target,
++                                       (pBuf + HTC_HDR_LENGTH + payloadLen - temp),
++                                       temp,
++                                       pNextLookAhead,
++                                       pPacket->Endpoint);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++#ifdef HTC_CAPTURE_LAST_FRAME
++            A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp);
++            target->LastTrailerLength = temp;
++#endif
++                /* trim length by trailer bytes */
++            pPacket->ActualLength -= temp;
++        }
++#ifdef HTC_CAPTURE_LAST_FRAME
++         else {
++            target->LastTrailerLength = 0;
++        }
++#endif
++
++            /* if we get to this point, the packet is good */
++            /* remove header and adjust length */
++        pPacket->pBuffer += HTC_HDR_LENGTH;
++        pPacket->ActualLength -= HTC_HDR_LENGTH;
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++            /* dump the whole packet */
++        DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT");
++    } else {
++#ifdef HTC_CAPTURE_LAST_FRAME
++        A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR));
++#endif
++        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
++            if (pPacket->ActualLength > 0) {
++                AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg");
++            }
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n"));
++    return status;
++}
++
++/* asynchronous completion handler for recv packet fetching, when the device layer
++ * completes a read request, it will call this completion handler */
++void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    HTC_ENDPOINT    *pEndpoint;
++    A_UINT32        nextLookAhead = 0;
++    A_STATUS        status;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++
++    AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
++    pEndpoint = &target->EndPoint[pPacket->Endpoint];
++    pPacket->Completion = NULL;
++
++        /* get completion status */
++    status = pPacket->Status;
++
++    do {
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++            break;
++        }
++            /* process the header for any trailer data */
++        status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++            /* was there a lookahead for the next packet? */
++        if (nextLookAhead != 0) {
++            A_STATUS nextStatus;
++            AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                            ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n",
++                             nextLookAhead));
++                /* we have another packet, get the next packet fetch started (pipelined) before
++                 * we call into the endpoint's callback, this will start another async request */
++            nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL);
++            if (A_EPROTO == nextStatus) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                            ("Next look ahead from recv header was INVALID\n"));
++                DebugDumpBytes((A_UINT8 *)&nextLookAhead,
++                                4,
++                                "BAD lookahead from lookahead report");
++            }
++        } else {
++             AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++            ("HTCRecvCompleteHandler - rechecking for more messages...\n"));
++            /* if we did not get anything on the look-ahead,
++             * call device layer to asynchronously re-check for messages. If we can keep the async
++             * processing going we get better performance.  If there is a pending message we will keep processing
++             * messages asynchronously which should pipeline things nicely */
++            DevCheckPendingRecvMsgsAsync(&target->Device);
++        }
++
++        HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead);
++        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                         ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n",
++                         status));
++            /* recyle this packet */
++         HTC_RECYCLE_RX_PKT(target, pPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n"));
++}
++
++/* synchronously wait for a control message from the target,
++ * This function is used at initialization time ONLY.  At init messages
++ * on ENDPOINT 0 are expected. */
++A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket)
++{
++    A_STATUS        status;
++    A_UINT32        lookAhead;
++    HTC_PACKET      *pPacket = NULL;
++    HTC_FRAME_HDR   *pHdr;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n"));
++
++    do  {
++
++        *ppControlPacket = NULL;
++
++            /* call the polling function to see if we have a message */
++        status = DevPollMboxMsgRecv(&target->Device,
++                                    &lookAhead,
++                                    HTC_TARGET_RESPONSE_TIMEOUT);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
++                ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead));
++
++            /* check the lookahead */
++        pHdr = (HTC_FRAME_HDR *)&lookAhead;
++
++        if (pHdr->EndpointID != ENDPOINT_0) {
++                /* unexpected endpoint number, should be zero */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        if (A_FAILED(status)) {
++                /* bad message */
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++        pPacket = HTC_ALLOC_CONTROL_RX(target);
++
++        if (pPacket == NULL) {
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_NO_MEMORY;
++            break;
++        }
++
++        pPacket->HTCReserved = lookAhead;
++        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
++
++        if (pPacket->ActualLength > pPacket->BufferLength) {
++            AR_DEBUG_ASSERT(FALSE);
++            status = A_EPROTO;
++            break;
++        }
++
++            /* we want synchronous operation */
++        pPacket->Completion = NULL;
++
++            /* get the message from the device, this will block */
++        status = HTCIssueRecv(target, pPacket);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++            /* process receive header */
++        status = HTCProcessRecvHeader(target,pPacket,NULL);
++
++        pPacket->Status = status;
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n",
++                     status));
++            break;
++        }
++
++            /* give the caller this control message packet, they are responsible to free */
++        *ppControlPacket = pPacket;
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        if (pPacket != NULL) {
++                /* cleanup buffer on error */
++            HTC_FREE_CONTROL_RX(target,pPacket);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n"));
++
++    return status;
++}
++
++/* callback when device layer or lookahead report parsing detects a pending message */
++A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    A_STATUS         status = A_OK;
++    HTC_PACKET      *pPacket = NULL;
++    HTC_FRAME_HDR   *pHdr;
++    HTC_ENDPOINT    *pEndpoint;
++    A_BOOL          asyncProc = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead));
++
++    if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) {
++            /* We use async mode to get the packets if the device layer supports it.
++             * The device layer interfaces with HIF in which HIF may have restrictions on
++             * how interrupts are processed */
++        asyncProc = TRUE;
++    }
++
++    if (pAsyncProc != NULL) {
++            /* indicate to caller how we decided to process this */
++        *pAsyncProc = asyncProc;
++    }
++
++    while (TRUE) {
++
++        pHdr = (HTC_FRAME_HDR *)&LookAhead;
++
++        if (pHdr->EndpointID >= ENDPOINT_MAX) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID));
++                /* invalid endpoint */
++            status = A_EPROTO;
++            break;
++        }
++
++        if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n",
++                    pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH));
++            status = A_EPROTO;
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[pHdr->EndpointID];
++
++        if (0 == pEndpoint->ServiceID) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID));
++                /* endpoint isn't even connected */
++            status = A_EPROTO;
++            break;
++        }
++
++            /* lock RX to get a buffer */
++        LOCK_HTC_RX(target);
++
++            /* get a packet from the endpoint recv queue */
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++
++        if (NULL == pPacket) {
++                /* check for refill handler */
++            if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) {
++                UNLOCK_HTC_RX(target);
++                    /* call the re-fill handler */
++                pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext,
++                                                    pHdr->EndpointID);
++                LOCK_HTC_RX(target);
++                    /* check if we have more buffers */
++                pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++                    /* fall through */
++            }
++        }
++
++        if (NULL == pPacket) {
++                /* this is not an error, we simply need to mark that we are waiting for buffers.*/
++            target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS;
++            target->EpWaitingForBuffers = pHdr->EndpointID;
++            status = A_NO_MEMORY;
++        }
++
++        UNLOCK_HTC_RX(target);
++
++        if (A_FAILED(status)) {
++                /* no buffers */
++            break;
++        }
++
++        AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID);
++
++            /* make sure this message can fit in the endpoint buffer */
++        if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n",
++                    pHdr->PayloadLen, pPacket->BufferLength));
++            status = A_EPROTO;
++            break;
++        }
++
++        pPacket->HTCReserved = LookAhead; /* set expected look ahead */
++            /* set the amount of data to fetch */
++        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
++
++        if (asyncProc) {
++                /* we use async mode to get the packet if the device layer supports it
++                 * set our callback and context */
++            pPacket->Completion = HTCRecvCompleteHandler;
++            pPacket->pContext = target;
++        } else {
++                /* fully synchronous */
++            pPacket->Completion = NULL;
++        }
++
++            /* go fetch the packet */
++        status = HTCIssueRecv(target, pPacket);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        if (asyncProc) {
++                /* we did this asynchronously so we can get out of the loop, the asynch processing
++                 * creates a chain of requests to continue processing pending messages in the
++                 * context of callbacks  */
++            break;
++        }
++
++            /* in the sync case, we process the packet, check lookaheads and then repeat */
++
++        LookAhead = 0;
++        status = HTCProcessRecvHeader(target,pPacket,&LookAhead);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead);
++        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
++
++        pPacket = NULL;
++
++        if (0 == LookAhead) {
++            break;
++        }
++
++    }
++
++    if (A_NO_MEMORY == status) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n",
++                pHdr->EndpointID));
++            /* try to stop receive at the device layer */
++        DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC);
++        status = A_OK;
++    } else if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                        ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n",
++                        LookAhead, status));
++        if (pPacket != NULL) {
++                /* clean up packet on error */
++            HTC_RECYCLE_RX_PKT(target, pPacket);
++        }
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n"));
++
++    return status;
++}
++
++/* Makes a buffer available to the HTC module */
++A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT *pEndpoint;
++    A_BOOL       unblockRecv = FALSE;
++    A_STATUS     status = A_OK;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n",
++                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength));
++
++    do {
++
++        if (HTC_STOPPING(target)) {
++            status = A_ECANCELED;
++            break;
++        }
++
++        AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
++
++        pEndpoint = &target->EndPoint[pPacket->Endpoint];
++
++        LOCK_HTC_RX(target);
++
++            /* store receive packet */
++        HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket);
++
++            /* check if we are blocked waiting for a new buffer */
++        if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) {
++            if (target->EpWaitingForBuffers == pPacket->Endpoint) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n",
++                    target->EpWaitingForBuffers));
++                target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS;
++                target->EpWaitingForBuffers = ENDPOINT_MAX;
++                unblockRecv = TRUE;
++            }
++        }
++
++        UNLOCK_HTC_RX(target);
++
++        if (unblockRecv && !HTC_STOPPING(target)) {
++                /* TODO : implement a buffer threshold count? */
++            DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC);
++        }
++
++    } while (FALSE);
++
++    return status;
++}
++
++static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint)
++{
++    HTC_PACKET  *pPacket;
++
++    LOCK_HTC_RX(target);
++
++    while (1) {
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
++        if (NULL == pPacket) {
++            break;
++        }
++        UNLOCK_HTC_RX(target);
++        pPacket->Status = A_ECANCELED;
++        pPacket->ActualLength = 0;
++        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("  Flushing RX packet:0x%X, length:%d, ep:%d \n",
++                (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint));
++            /* give the packet back */
++        pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext,
++                                      pPacket);
++        LOCK_HTC_RX(target);
++    }
++
++    UNLOCK_HTC_RX(target);
++
++
++}
++
++void HTCFlushRecvBuffers(HTC_TARGET *target)
++{
++    HTC_ENDPOINT    *pEndpoint;
++    int             i;
++
++        /* NOTE: no need to flush endpoint 0, these buffers were
++         * allocated as part of the HTC struct */
++    for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) {
++        pEndpoint = &target->EndPoint[i];
++        if (pEndpoint->ServiceID == 0) {
++                /* not in use.. */
++            continue;
++        }
++        HTCFlushEndpointRX(target,pEndpoint);
++    }
++
++
++}
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_send.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_send.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_send.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_send.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,538 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++#define DO_EP_TX_COMPLETION(ep,p)                                    \
++{                                                                    \
++    (p)->Completion = NULL;                                          \
++    (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p));  \
++}
++
++
++/* call the distribute credits callback with the distribution */
++#define DO_DISTRIBUTION(t,reason,description,pList) \
++{                                             \
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,           \
++        ("  calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \
++                (description),                                           \
++                (A_UINT32)(t)->DistributeCredits,                        \
++                (A_UINT32)(t)->pCredDistContext,                         \
++                (A_UINT32)pList));                                       \
++    (t)->DistributeCredits((t)->pCredDistContext,                        \
++                           (pList),                                      \
++                           (reason));                                    \
++}
++
++/* our internal send packet completion handler when packets are submited to the AR6K device
++ * layer */
++static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = (HTC_TARGET *)Context;
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[pPacket->Endpoint];
++
++
++    if (A_FAILED(pPacket->Status)) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++            ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n",
++                pPacket->Status, pPacket->Endpoint));
++    }
++        /* first, fixup the head room we allocated */
++    pPacket->pBuffer += HTC_HDR_LENGTH;
++        /* do completion */
++    DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++}
++
++A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags)
++{
++    A_STATUS status;
++    A_UINT8 *pHdrBuf;
++    A_BOOL   sync = FALSE;
++
++        /* caller always provides headrooom */
++    pPacket->pBuffer -= HTC_HDR_LENGTH;
++    pHdrBuf = pPacket->pBuffer;
++        /* setup frame header */
++    A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength);
++    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags);
++    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint);
++
++    if (pPacket->Completion == NULL) {
++            /* mark that this request was synchronously issued */
++        sync = TRUE;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+-HTCIssueSend: transmit length : %d (%s) \n",
++                    pPacket->ActualLength + HTC_HDR_LENGTH,
++                    sync ? "SYNC" : "ASYNC" ));
++
++        /* send message to device */
++    status = DevSendPacket(&target->Device,
++                           pPacket,
++                           pPacket->ActualLength + HTC_HDR_LENGTH);
++
++    if (sync) {
++            /* use local sync variable.  If this was issued asynchronously, pPacket is no longer
++             * safe to access. */
++        pPacket->pBuffer += HTC_HDR_LENGTH;
++    }
++
++    /* if this request was asynchronous, the packet completion routine will be invoked by
++     * the device layer when the HIF layer completes the request */
++
++    return status;
++}
++
++/* try to send the current packet or a packet at the head of the TX queue,
++ * if there are no credits, the packet remains in the queue. */
++static void HTCTrySend(HTC_TARGET      *target,
++                       HTC_PACKET      *pPacketToSend,
++                       HTC_ENDPOINT_ID ep)
++{
++    HTC_PACKET   *pPacket;
++    HTC_ENDPOINT *pEndpoint;
++    int          creditsRequired;
++    A_UINT8      sendFlags;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend));
++
++    pEndpoint = &target->EndPoint[ep];
++
++    LOCK_HTC_TX(target);
++
++    if (pPacketToSend != NULL) {
++        /* caller supplied us a packet to queue to the tail of the HTC TX queue before
++         * we check the tx queue */
++        HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend);
++        pEndpoint->CurrentTxQueueDepth++;
++    }
++
++        /* now drain the TX queue for transmission as long as we have enough
++         * credits */
++
++    while (1) {
++
++        if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) {
++                /* nothing in the queue */
++            break;
++        }
++
++        sendFlags = 0;
++
++            /* get packet at head, but don't remove it */
++        pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue);
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n",
++                (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth));
++
++            /* figure out how many credits this message requires */
++        creditsRequired  = pPacket->ActualLength + HTC_HDR_LENGTH;
++        creditsRequired += target->TargetCreditSize - 1;
++        creditsRequired /= target->TargetCreditSize;
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d   Got:%d\n",
++                            creditsRequired, pEndpoint->CreditDist.TxCredits));
++
++        if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
++
++            /* not enough credits */
++
++            if (pPacket->Endpoint == ENDPOINT_0) {
++                    /* leave it in the queue */
++                break;
++            }
++                /* invoke the registered distribution function only if this is not
++                 * endpoint 0, we let the driver layer provide more credits if it can.
++                 * We pass the credit distribution list starting at the endpoint in question
++                 * */
++
++                /* set how many credits we need  */
++            pEndpoint->CreditDist.TxCreditsSeek =
++                                    creditsRequired - pEndpoint->CreditDist.TxCredits;
++            DO_DISTRIBUTION(target,
++                            HTC_CREDIT_DIST_SEEK_CREDITS,
++                            "Seek Credits",
++                            &pEndpoint->CreditDist);
++
++            pEndpoint->CreditDist.TxCreditsSeek = 0;
++
++            if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
++                    /* still not enough credits to send, leave packet in the queue */
++                AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    (" Not enough credits for ep %d leaving packet in queue..\n",
++                    pPacket->Endpoint));
++                break;
++            }
++
++        }
++
++        pEndpoint->CreditDist.TxCredits -= creditsRequired;
++        INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired);
++
++            /* check if we need credits */
++        if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
++            sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
++            INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1);
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits  \n"));
++        }
++
++            /* now we can fully dequeue */
++        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue);
++        pEndpoint->CurrentTxQueueDepth--;
++
++        INC_HTC_EP_STAT(pEndpoint, TxIssued, 1);
++
++        UNLOCK_HTC_TX(target);
++
++        HTCIssueSend(target, pPacket, sendFlags);
++
++        LOCK_HTC_TX(target);
++
++        /* go back and check for more messages */
++    }
++
++    if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n",
++                        ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth));
++        UNLOCK_HTC_TX(target);
++            /* queue is now full, let caller know */
++        if (pEndpoint->EpCallBacks.EpSendFull != NULL) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n"));
++            pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep);
++        }
++    } else {
++        UNLOCK_HTC_TX(target);
++            /* queue is now available for new packet, let caller know */
++        if (pEndpoint->EpCallBacks.EpSendAvail)
++            pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend:  \n"));
++}
++
++/* HTC API - HTCSendPkt */
++A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint;
++    HTC_ENDPOINT_ID ep;
++    A_STATUS        status = A_OK;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
++                    ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n",
++                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength));
++
++    ep = pPacket->Endpoint;
++    AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
++    pEndpoint = &target->EndPoint[ep];
++
++    do {
++
++        if (HTC_STOPPING(target)) {
++            status = A_ECANCELED;
++            pPacket->Status = status;
++            DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++            break;
++        }
++            /* everything sent through this interface is asynchronous */
++            /* fill in HTC completion routines */
++        pPacket->Completion = HTCSendPktCompletionHandler;
++        pPacket->pContext = target;
++
++        HTCTrySend(target, pPacket, ep);
++
++    } while (FALSE);
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n"));
++
++    return status;
++}
++
++
++/* check TX queues to drain because of credit distribution update */
++static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target)
++{
++    HTC_ENDPOINT                *pEndpoint;
++    HTC_ENDPOINT_CREDIT_DIST    *pDistItem;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n"));
++    pDistItem = target->EpCreditDistributionListHead;
++
++        /* run through the credit distribution list to see
++         * if there are packets queued
++         * NOTE: no locks need to be taken since the distribution list
++         * is not dynamic (cannot be re-ordered) and we are not modifying any state */
++    while (pDistItem != NULL) {
++        pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved;
++
++        if (pEndpoint->CurrentTxQueueDepth > 0) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n",
++                    pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth));
++                /* try to start the stalled queue, this list is ordered by priority.
++                 * Highest priority queue get's processed first, if there are credits available the
++                 * highest priority queue will get a chance to reclaim credits from lower priority
++                 * ones */
++            HTCTrySend(target, NULL, pDistItem->Endpoint);
++        }
++
++        pDistItem = pDistItem->pNext;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n"));
++}
++
++/* process credit reports and call distribution function */
++void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint)
++{
++    int             i;
++    HTC_ENDPOINT    *pEndpoint;
++    int             totalCredits = 0;
++    A_BOOL          doDist = FALSE;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries));
++
++        /* lock out TX while we update credits */
++    LOCK_HTC_TX(target);
++
++    for (i = 0; i < NumEntries; i++, pRpt++) {
++        if (pRpt->EndpointID >= ENDPOINT_MAX) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[pRpt->EndpointID];
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Endpoint %d got %d credits \n",
++                pRpt->EndpointID, pRpt->Credits));
++
++
++#ifdef HTC_EP_STAT_PROFILING
++
++        INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1);
++        INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits);
++
++        if (FromEndpoint == pRpt->EndpointID) {
++                /* this credit report arrived on the same endpoint indicating it arrived in an RX
++                 * packet */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1);
++        } else if (FromEndpoint == ENDPOINT_0) {
++                /* this credit arrived on endpoint 0 as a NULL message */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1);
++        } else {
++                /* arrived on another endpoint */
++            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits);
++            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1);
++        }
++
++#endif
++
++        if (ENDPOINT_0 == pRpt->EndpointID) {
++                /* always give endpoint 0 credits back */
++            pEndpoint->CreditDist.TxCredits += pRpt->Credits;
++        } else {
++                /* for all other endpoints, update credits to distribute, the distribution function
++                 * will handle giving out credits back to the endpoints */
++            pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits;
++                /* flag that we have to do the distribution */
++            doDist = TRUE;
++        }
++
++        totalCredits += pRpt->Credits;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Report indicated %d credits to distribute \n", totalCredits));
++
++    if (doDist) {
++            /* this was a credit return based on a completed send operations
++             * note, this is done with the lock held */
++        DO_DISTRIBUTION(target,
++                        HTC_CREDIT_DIST_SEND_COMPLETE,
++                        "Send Complete",
++                        target->EpCreditDistributionListHead->pNext);
++    }
++
++    UNLOCK_HTC_TX(target);
++
++    if (totalCredits) {
++        HTCCheckEndpointTxQueues(target);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n"));
++}
++
++/* flush endpoint TX queue */
++static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag)
++{
++    HTC_PACKET          *pPacket;
++    HTC_PACKET_QUEUE    discardQueue;
++
++        /* initialize the discard queue */
++    INIT_HTC_PACKET_QUEUE(&discardQueue);
++
++    LOCK_HTC_TX(target);
++
++        /* interate from the front of the TX queue and flush out packets */
++    ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) {
++
++            /* check for removal */
++        if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) {
++                /* remove from queue */
++            HTC_PACKET_REMOVE(pPacket);
++                /* add it to the discard pile */
++            HTC_PACKET_ENQUEUE(&discardQueue, pPacket);
++            pEndpoint->CurrentTxQueueDepth--;
++        }
++
++    } ITERATE_END;
++
++    UNLOCK_HTC_TX(target);
++
++        /* empty the discard queue */
++    while (1) {
++        pPacket = HTC_PACKET_DEQUEUE(&discardQueue);
++        if (NULL == pPacket) {
++            break;
++        }
++        pPacket->Status = A_ECANCELED;
++        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("  Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n",
++                (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag));
++        DO_EP_TX_COMPLETION(pEndpoint,pPacket);
++    }
++
++}
++
++void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist)
++{
++#ifdef DEBUG
++    HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved;
++#endif
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d  ServiceID: 0x%X    --------------\n",
++                        pEPDist->Endpoint, pEPDist->ServiceID));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n",
++                (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags          : 0x%X \n", pEPDist->DistFlags));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm      : %d \n", pEPDist->TxCreditsNorm));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin       : %d \n", pEPDist->TxCreditsMin));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits          : %d \n", pEPDist->TxCredits));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned  : %d \n", pEPDist->TxCreditsAssigned));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek      : %d \n", pEPDist->TxCreditsSeek));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize       : %d \n", pEPDist->TxCreditSize));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist    : %d \n", pEPDist->TxCreditsToDist));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth       : %d \n", pEndpoint->CurrentTxQueueDepth));
++    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n"));
++}
++
++void DumpCreditDistStates(HTC_TARGET *target)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead;
++
++    while (pEPList != NULL) {
++        DumpCreditDist(pEPList);
++        pEPList = pEPList->pNext;
++    }
++
++    if (target->DistributeCredits != NULL) {
++        DO_DISTRIBUTION(target,
++                        HTC_DUMP_CREDIT_STATE,
++                        "Dump State",
++                        NULL);
++    }
++}
++
++/* flush all send packets from all endpoint queues */
++void HTCFlushSendPkts(HTC_TARGET *target)
++{
++    HTC_ENDPOINT    *pEndpoint;
++    int             i;
++
++    DumpCreditDistStates(target);
++
++    for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
++        pEndpoint = &target->EndPoint[i];
++        if (pEndpoint->ServiceID == 0) {
++                /* not in use.. */
++            continue;
++        }
++        HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL);
++    }
++
++}
++
++/* HTC API to flush an endpoint's TX queue*/
++void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
++
++    if (pEndpoint->ServiceID == 0) {
++        AR_DEBUG_ASSERT(FALSE);
++        /* not in use.. */
++        return;
++    }
++
++    HTCFlushEndpointTX(target, pEndpoint, Tag);
++}
++
++/* HTC API to indicate activity to the credit distribution function */
++void HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
++                               HTC_ENDPOINT_ID Endpoint,
++                               A_BOOL          Active)
++{
++    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
++    A_BOOL          doDist = FALSE;
++
++    if (pEndpoint->ServiceID == 0) {
++        AR_DEBUG_ASSERT(FALSE);
++        /* not in use.. */
++        return;
++    }
++
++    LOCK_HTC_TX(target);
++
++    if (Active) {
++        if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) {
++                /* mark active now */
++            pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE;
++            doDist = TRUE;
++        }
++    } else {
++        if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) {
++                /* mark inactive now */
++            pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE;
++            doDist = TRUE;
++        }
++    }
++
++    if (doDist) {
++        /* do distribution again based on activity change
++         * note, this is done with the lock held */
++        DO_DISTRIBUTION(target,
++                        HTC_CREDIT_DIST_ACTIVITY_CHANGE,
++                        "Activity Change",
++                        target->EpCreditDistributionListHead->pNext);
++    }
++
++    UNLOCK_HTC_TX(target);
++
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_services.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_services.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/htc/htc_services.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/htc/htc_services.c 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,403 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "htc_internal.h"
++
++void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket)
++{
++        /* not implemented
++         * we do not send control TX frames during normal runtime, only during setup  */
++    AR_DEBUG_ASSERT(FALSE);
++}
++
++    /* callback when a control message arrives on this endpoint */
++void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
++{
++    AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);
++
++        /* the only control messages we are expecting are NULL messages (credit resports), which should
++         * never get here */
++    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    ("HTCControlRecv, got message with length:%d \n",
++                    pPacket->ActualLength + HTC_HDR_LENGTH));
++
++        /* dump header and message */
++    DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
++                   pPacket->ActualLength + HTC_HDR_LENGTH,
++                   "Unexpected ENDPOINT 0 Message");
++
++    HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket);
++}
++
++A_STATUS HTCSendSetupComplete(HTC_TARGET *target)
++{
++    HTC_PACKET             *pSendPacket = NULL;
++    A_STATUS                status;
++    HTC_SETUP_COMPLETE_MSG *pSetupComplete;
++
++    do {
++           /* allocate a packet to send to the target */
++        pSendPacket = HTC_ALLOC_CONTROL_TX(target);
++
++        if (NULL == pSendPacket) {
++            status = A_NO_MEMORY;
++            break;
++        }
++
++            /* assemble setup complete message */
++        pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer;
++        A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG));
++        pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID;
++
++        SET_HTC_PACKET_INFO_TX(pSendPacket,
++                               NULL,
++                               (A_UINT8 *)pSetupComplete,
++                               sizeof(HTC_SETUP_COMPLETE_MSG),
++                               ENDPOINT_0,
++                               HTC_SERVICE_TX_PACKET_TAG);
++
++            /* we want synchronous operation */
++        pSendPacket->Completion = NULL;
++            /* send the message */
++        status = HTCIssueSend(target,pSendPacket,0);
++
++    } while (FALSE);
++
++    if (pSendPacket != NULL) {
++        HTC_FREE_CONTROL_TX(target,pSendPacket);
++    }
++
++    return status;
++}
++
++
++A_STATUS HTCConnectService(HTC_HANDLE               HTCHandle,
++                           HTC_SERVICE_CONNECT_REQ  *pConnectReq,
++                           HTC_SERVICE_CONNECT_RESP *pConnectResp)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    A_STATUS                            status = A_OK;
++    HTC_PACKET                          *pRecvPacket = NULL;
++    HTC_PACKET                          *pSendPacket = NULL;
++    HTC_CONNECT_SERVICE_RESPONSE_MSG    *pResponseMsg;
++    HTC_CONNECT_SERVICE_MSG             *pConnectMsg;
++    HTC_ENDPOINT_ID                     assignedEndpoint = ENDPOINT_MAX;
++    HTC_ENDPOINT                        *pEndpoint;
++    int                                 maxMsgSize = 0;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n",
++               (A_UINT32)target, pConnectReq->ServiceID));
++
++    do {
++
++        AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0);
++
++        if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) {
++                /* special case for pseudo control service */
++            assignedEndpoint = ENDPOINT_0;
++            maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH;
++        } else {
++                /* allocate a packet to send to the target */
++            pSendPacket = HTC_ALLOC_CONTROL_TX(target);
++
++            if (NULL == pSendPacket) {
++                AR_DEBUG_ASSERT(FALSE);
++                status = A_NO_MEMORY;
++                break;
++            }
++                /* assemble connect service message */
++            pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer;
++            AR_DEBUG_ASSERT(pConnectMsg != NULL);
++            A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG));
++            pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID;
++            pConnectMsg->ServiceID = pConnectReq->ServiceID;
++            pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags;
++                /* check caller if it wants to transfer meta data */
++            if ((pConnectReq->pMetaData != NULL) &&
++                (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
++                    /* copy meta data into message buffer (after header ) */
++                A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG),
++                         pConnectReq->pMetaData,
++                         pConnectReq->MetaDataLength);
++                pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength;
++            }
++
++            SET_HTC_PACKET_INFO_TX(pSendPacket,
++                                   NULL,
++                                   (A_UINT8 *)pConnectMsg,
++                                   sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength,
++                                   ENDPOINT_0,
++                                   HTC_SERVICE_TX_PACKET_TAG);
++
++                /* we want synchronous operation */
++            pSendPacket->Completion = NULL;
++
++            status = HTCIssueSend(target,pSendPacket,0);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++
++                /* wait for response */
++            status = HTCWaitforControlMessage(target, &pRecvPacket);
++
++            if (A_FAILED(status)) {
++                break;
++            }
++                /* we controlled the buffer creation so it has to be properly aligned */
++            pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer;
++
++            if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) ||
++                (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) {
++                    /* this message is not valid */
++                AR_DEBUG_ASSERT(FALSE);
++                status = A_EPROTO;
++                break;
++            }
++
++            pConnectResp->ConnectRespCode = pResponseMsg->Status;
++                /* check response status */
++            if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) {
++                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
++                    (" Target failed service 0x%X connect request (status:%d)\n",
++                                pResponseMsg->ServiceID, pResponseMsg->Status));
++                status = A_EPROTO;
++                break;
++            }
++
++            assignedEndpoint = pResponseMsg->EndpointID;
++            maxMsgSize = pResponseMsg->MaxMsgSize;
++
++            if ((pConnectResp->pMetaData != NULL) &&
++                (pResponseMsg->ServiceMetaLength > 0) &&
++                (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
++                    /* caller supplied a buffer and the target responded with data */
++                int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength);
++                    /* copy the meta data */
++                A_MEMCPY(pConnectResp->pMetaData,
++                         ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG),
++                         copyLength);
++                pConnectResp->ActualLength = copyLength;
++            }
++
++        }
++
++            /* the rest of these are parameter checks so set the error status */
++        status = A_EPROTO;
++
++        if (assignedEndpoint >= ENDPOINT_MAX) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        if (0 == maxMsgSize) {
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++        pEndpoint = &target->EndPoint[assignedEndpoint];
++
++        if (pEndpoint->ServiceID != 0) {
++            /* endpoint already in use! */
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++
++            /* return assigned endpoint to caller */
++        pConnectResp->Endpoint = assignedEndpoint;
++        pConnectResp->MaxMsgLength = maxMsgSize;
++
++            /* setup the endpoint */
++        pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */
++        pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth;
++        pEndpoint->MaxMsgLength = maxMsgSize;
++            /* copy all the callbacks */
++        pEndpoint->EpCallBacks = pConnectReq->EpCallbacks;
++        INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers);
++        INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue);
++            /* set the credit distribution info for this endpoint, this information is
++             * passed back to the credit distribution callback function */
++        pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID;
++        pEndpoint->CreditDist.pHTCReserved = pEndpoint;
++        pEndpoint->CreditDist.Endpoint = assignedEndpoint;
++        pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize;
++        pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize;
++
++        if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
++            pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1;
++        }
++
++        status = A_OK;
++
++    } while (FALSE);
++
++    if (pSendPacket != NULL) {
++        HTC_FREE_CONTROL_TX(target,pSendPacket);
++    }
++
++    if (pRecvPacket != NULL) {
++        HTC_FREE_CONTROL_RX(target,pRecvPacket);
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n"));
++
++    return status;
++}
++
++static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry;
++
++    if (NULL == target->EpCreditDistributionListHead) {
++        target->EpCreditDistributionListHead = pEpDist;
++        pEpDist->pNext = NULL;
++        pEpDist->pPrev = NULL;
++        return;
++    }
++
++        /* queue to the end of the list, this does not have to be very
++         * fast since this list is built at startup time */
++    pCurEntry = target->EpCreditDistributionListHead;
++
++    while (pCurEntry) {
++        pLastEntry = pCurEntry;
++        pCurEntry = pCurEntry->pNext;
++    }
++
++    pLastEntry->pNext = pEpDist;
++    pEpDist->pPrev = pLastEntry;
++    pEpDist->pNext = NULL;
++}
++
++
++
++/* default credit init callback */
++static void HTCDefaultCreditInit(void                     *Context,
++                                 HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                 int                      TotalCredits)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      totalEps = 0;
++    int                      creditsPerEndpoint;
++
++    pCurEpDist = pEPList;
++        /* first run through the list and figure out how many endpoints we are dealing with */
++    while (pCurEpDist != NULL) {
++        pCurEpDist = pCurEpDist->pNext;
++        totalEps++;
++    }
++
++        /* even distribution */
++    creditsPerEndpoint = TotalCredits/totalEps;
++
++    pCurEpDist = pEPList;
++        /* run through the list and set minimum and normal credits and
++         * provide the endpoint with some credits to start */
++    while (pCurEpDist != NULL) {
++
++        if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) {
++                /* too many endpoints and not enough credits */
++            AR_DEBUG_ASSERT(FALSE);
++            break;
++        }
++            /* our minimum is set for at least 1 max message */
++        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
++            /* this value is ignored by our credit alg, since we do
++             * not dynamically adjust credits, this is the policy of
++             * the "default" credit distribution, something simple and easy */
++        pCurEpDist->TxCreditsNorm = 0xFFFF;
++            /* give the endpoint minimum credits */
++        pCurEpDist->TxCredits = creditsPerEndpoint;
++        pCurEpDist->TxCreditsAssigned = creditsPerEndpoint;
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++}
++
++/* default credit distribution callback, NOTE, this callback holds the TX lock */
++void HTCDefaultCreditDist(void                     *Context,
++                          HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
++                          HTC_CREDIT_DIST_REASON   Reason)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++
++    if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) {
++        pCurEpDist = pEPDistList;
++            /* simple distribution */
++        while (pCurEpDist != NULL) {
++            if (pCurEpDist->TxCreditsToDist > 0) {
++                    /* just give the endpoint back the credits */
++                pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
++                pCurEpDist->TxCreditsToDist = 0;
++            }
++            pCurEpDist = pCurEpDist->pNext;
++        }
++    }
++
++    /* note we do not need to handle the other reason codes as this is a very
++     * simple distribution scheme, no need to seek for more credits or handle inactivity */
++}
++
++void HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
++                              void                     *pCreditDistContext,
++                              HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
++                              HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
++                              HTC_SERVICE_ID           ServicePriorityOrder[],
++                              int                      ListLength)
++{
++    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
++    int i;
++    int ep;
++
++    if (CreditInitFunc != NULL) {
++            /* caller has supplied their own distribution functions */
++        target->InitCredits = CreditInitFunc;
++        AR_DEBUG_ASSERT(CreditDistFunc != NULL);
++        target->DistributeCredits = CreditDistFunc;
++        target->pCredDistContext = pCreditDistContext;
++    } else {
++        /* caller wants HTC to do distribution */
++        /* if caller wants service to handle distributions then
++         * it must set both of these to NULL! */
++        AR_DEBUG_ASSERT(CreditDistFunc == NULL);
++        target->InitCredits = HTCDefaultCreditInit;
++        target->DistributeCredits = HTCDefaultCreditDist;
++        target->pCredDistContext = target;
++    }
++
++        /* always add HTC control endpoint first, we only expose the list after the
++         * first one, this is added for TX queue checking */
++    AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist);
++
++        /* build the list of credit distribution structures in priority order
++         * supplied by the caller, these will follow endpoint 0 */
++    for (i = 0; i < ListLength; i++) {
++            /* match services with endpoints and add the endpoints to the distribution list
++             * in FIFO order */
++        for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
++            if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) {
++                    /* queue this one to the list */
++                AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist);
++                break;
++            }
++        }
++        AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
++    }
++
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_config.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_config.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_config.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_config.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,27 @@
++#ifndef _A_CONFIG_H_
++#define _A_CONFIG_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * This file contains software configuration options that enables
++ * specific software "features"
++ */
++#include "../ar6000/config_linux.h"
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_debug.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_debug.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_debug.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_debug.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,41 @@
++#ifndef _A_DEBUG_H_
++#define _A_DEBUG_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_types.h>
++#include <a_osapi.h>
++
++#define DBG_INFO              0x00000001
++#define DBG_ERROR             0x00000002
++#define DBG_WARNING           0x00000004
++#define DBG_SDIO              0x00000008
++#define DBG_HIF                       0x00000010
++#define DBG_HTC                       0x00000020
++#define DBG_WMI                       0x00000040
++#define DBG_WMI2              0x00000080
++#define DBG_DRIVER            0x00000100
++
++#define DBG_DEFAULTS  (DBG_ERROR|DBG_WARNING)
++
++#include "../ar6000/debug_linux.h"
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_drv_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_drv_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_drv_api.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_drv_api.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,185 @@
++#ifndef _A_DRV_API_H_
++#define _A_DRV_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/****************************************************************************/
++/****************************************************************************/
++/**                                                                        **/
++/** WMI related hooks                                                      **/
++/**                                                                        **/
++/****************************************************************************/
++/****************************************************************************/
++
++#include <ar6000_api.h>
++
++#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList) \
++      ar6000_channelList_rx((devt), (numChan), (chanList))
++
++#define A_WMI_SET_NUMDATAENDPTS(devt, num)    \
++      ar6000_set_numdataendpts((devt), (num))
++
++#define A_WMI_CONTROL_TX(devt, osbuf, streamID)       \
++      ar6000_control_tx((devt), (osbuf), (streamID))
++
++#define A_WMI_TARGETSTATS_EVENT(devt, pStats) \
++      ar6000_targetStats_event((devt), (pStats))
++
++#define A_WMI_SCANCOMPLETE_EVENT(devt, status)        \
++      ar6000_scanComplete_event((devt), (status))
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++
++#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg)     \
++      ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg))
++
++#define A_WMI_DSET_CLOSE(devt, access_cookie) \
++      ar6000_dset_close((devt), (access_cookie))
++
++#endif
++
++#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \
++      ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg))
++
++#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \
++      ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo))
++
++#define A_WMI_REGDOMAIN_EVENT(devt, regCode)  \
++      ar6000_regDomain_event((devt), (regCode))
++
++#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info)        \
++      ar6000_neighborReport_event((devt), (numAps), (info))
++
++#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus)    \
++      ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus))
++
++#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast) \
++      ar6000_tkip_micerr_event((devt), (keyid), (ismcast))
++
++#define A_WMI_BITRATE_RX(devt, rateKbps)      \
++      ar6000_bitrate_rx((devt), (rateKbps))
++
++#define A_WMI_TXPWR_RX(devt, txPwr)   \
++      ar6000_txPwr_rx((devt), (txPwr))
++
++#define A_WMI_READY_EVENT(devt, datap, phyCap)        \
++      ar6000_ready_event((devt), (datap), (phyCap))
++
++#define A_WMI_DBGLOG_INIT_DONE(ar) \
++        ar6000_dbglog_init_done(ar);
++
++#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi)  \
++      ar6000_rssiThreshold_event((devt), (newThreshold), (rssi))
++
++#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal)      \
++      ar6000_reportError_event((devt), (errorVal))
++
++#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \
++      ar6000_roam_tbl_event((devt), (pTbl))
++
++#define A_WMI_ROAM_DATA_EVENT(devt, p) \
++      ar6000_roam_data_event((devt), (p))
++
++#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters)  \
++      ar6000_wow_list_event((devt), (num_filters), (wow_filters))
++
++#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion)  \
++      ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion))
++
++#define A_WMI_IPTOS_TO_USERPRIORITY(pkt)    \
++      ar6000_iptos_to_userPriority((pkt))
++
++#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list)   \
++      ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list))
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++
++#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \
++      ar6000_gpio_intr_rx((intr_mask), (input_values))
++
++#define A_WMI_GPIO_DATA_RX(reg_id, value) \
++      ar6000_gpio_data_rx((reg_id), (value))
++
++#define A_WMI_GPIO_ACK_RX() \
++      ar6000_gpio_ack_rx()
++
++#endif
++
++#ifdef SEND_EVENT_TO_APP
++
++#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \
++      ar6000_send_event_to_app((ar), (eventId), (datap), (len))
++
++#else
++
++#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len)
++
++#endif
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \
++      ar6000_tcmd_rx_report_event((devt), (results), (len))
++#endif
++
++#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source)    \
++    ar6000_hbChallengeResp_event((devt), (cookie), (source))
++
++#define A_WMI_TX_RETRY_ERR_EVENT(devt) \
++      ar6000_tx_retry_err_event((devt))
++
++#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \
++      ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr))
++
++#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \
++      ar6000_lqThresholdEvent_rx((devt), (range), (lqVal))
++
++#define A_WMI_RATEMASK_RX(devt, ratemask) \
++      ar6000_ratemask_rx((devt), (ratemask))
++
++#define A_WMI_KEEPALIVE_RX(devt, configured)    \
++        ar6000_keepalive_rx((devt), (configured))
++
++#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len)   \
++        ar6000_bssInfo_event_rx((ar), (datap), (len))
++
++#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \
++        ar6000_dbglog_event((ar), (dropped), (buffer), (length));
++
++#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \
++    ar6000_indicate_tx_activity((devt),(trafficClass), TRUE)
++
++#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \
++    ar6000_indicate_tx_activity((devt),(trafficClass), FALSE)
++
++/****************************************************************************/
++/****************************************************************************/
++/**                                                                        **/
++/** HTC related hooks                                                      **/
++/**                                                                        **/
++/****************************************************************************/
++/****************************************************************************/
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_drv.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_drv.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_drv.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_drv.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,28 @@
++#ifndef _A_DRV_H_
++#define _A_DRV_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/athdrv_linux.h"
++
++#endif /* _ADRV_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_osapi.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_osapi.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_osapi.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_osapi.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,28 @@
++#ifndef _A_OSAPI_H_
++#define _A_OSAPI_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/osapi_linux.h"
++
++#endif /* _OSAPI_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ar6000_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ar6000_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ar6000_api.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ar6000_api.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,29 @@
++#ifndef _AR6000_API_H_
++#define _AR6000_API_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the API to access the OS dependent atheros host driver
++ * by the WMI or WLAN generic modules.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/ar6xapi_linux.h"
++
++#endif /* _AR6000_API_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ar6000_diag.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ar6000_diag.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ar6000_diag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ar6000_diag.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,38 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef AR6000_DIAG_H_
++#define AR6000_DIAG_H_
++
++
++A_STATUS
++ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++A_STATUS
++ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++
++A_STATUS
++ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                    A_UCHAR *data, A_UINT32 length);
++
++A_STATUS
++ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                     A_UCHAR *data, A_UINT32 length);
++
++#endif /*AR6000_DIAG_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6001_regdump.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6001_regdump.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6001_regdump.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6001_regdump.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,100 @@
++/*
++ * Copyright (c) 2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __AR6000_REGDUMP_H__
++#define __AR6000_REGDUMP_H__
++
++#if !defined(__ASSEMBLER__)
++/*
++ * Target CPU state at the time of failure is reflected
++ * in a register dump, which the Host can fetch through
++ * the diagnostic window.
++ */
++
++struct MIPS_exception_frame_s {
++    A_UINT32 pc;        /* Program Counter */
++    A_UINT32 at;        /* MIPS General Purpose registers */
++    A_UINT32 v0;
++    A_UINT32 v1;
++    A_UINT32 a0;
++    A_UINT32 a1;
++    A_UINT32 a2;
++    A_UINT32 a3;
++    A_UINT32 t0;
++    A_UINT32 t1;
++    A_UINT32 t2;
++    A_UINT32 t3;
++    A_UINT32 t4;
++    A_UINT32 t5;
++    A_UINT32 t6;
++    A_UINT32 t7;
++    A_UINT32 s0;
++    A_UINT32 s1;
++    A_UINT32 s2;
++    A_UINT32 s3;
++    A_UINT32 s4;
++    A_UINT32 s5;
++    A_UINT32 s6;
++    A_UINT32 s7;
++    A_UINT32 t8;
++    A_UINT32 t9;
++    A_UINT32 k0;
++    A_UINT32 k1;
++    A_UINT32 gp;
++    A_UINT32 sp;
++    A_UINT32 s8;
++    A_UINT32 ra;
++    A_UINT32 cause; /* Selected coprocessor regs */
++    A_UINT32 status;
++};
++typedef struct MIPS_exception_frame_s CPU_exception_frame_t;
++
++#endif
++
++/*
++ * Offsets into MIPS_exception_frame structure, for use in assembler code
++ * MUST MATCH C STRUCTURE ABOVE
++ */
++#define RD_pc           0
++#define RD_at           1
++#define RD_v0           2
++#define RD_v1           3
++#define RD_a0           4
++#define RD_a1           5
++#define RD_a2           6
++#define RD_a3           7
++#define RD_t0           8
++#define RD_t1           9
++#define RD_t2           10
++#define RD_t3           11
++#define RD_t4           12
++#define RD_t5           13
++#define RD_t6           14
++#define RD_t7           15
++#define RD_s0           16
++#define RD_s1           17
++#define RD_s2           18
++#define RD_s3           19
++#define RD_s4           20
++#define RD_s5           21
++#define RD_s6           22
++#define RD_s7           23
++#define RD_t8           24
++#define RD_t9           25
++#define RD_k0           26
++#define RD_k1           27
++#define RD_gp           28
++#define RD_sp           29
++#define RD_s8           30
++#define RD_ra           31
++#define RD_cause        32
++#define RD_status       33
++
++#define RD_SIZE         (34*4) /* Space for this number of words */
++
++#endif /* __AR6000_REGDUMP_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6Khwreg.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6Khwreg.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6Khwreg.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6Khwreg.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,147 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions for AR6001 registers
++ * that may be directly manipulated by Host software.
++ */
++
++#ifndef __AR6KHWREG_H__
++#define __AR6KHWREG_H__
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* Host registers */
++#define HOST_INT_STATUS_ADDRESS                  0x00000400
++#define CPU_INT_STATUS_ADDRESS                   0x00000401
++#define ERROR_INT_STATUS_ADDRESS                 0x00000402
++#define INT_STATUS_ENABLE_ADDRESS                0x00000418
++#define CPU_INT_STATUS_ENABLE_ADDRESS            0x00000419
++#define COUNT_ADDRESS                            0x00000420
++#define COUNT_DEC_ADDRESS                        0x00000440
++#define WINDOW_DATA_ADDRESS                      0x00000474
++#define WINDOW_WRITE_ADDR_ADDRESS                0x00000478
++#define WINDOW_READ_ADDR_ADDRESS                 0x0000047c
++
++/* Target addresses */
++#define RESET_CONTROL_ADDRESS                    0x0c000000
++#define MC_REMAP_VALID_ADDRESS                   0x0c004080
++#define MC_REMAP_SIZE_ADDRESS                    0x0c004100
++#define MC_REMAP_COMPARE_ADDRESS                 0x0c004180
++#define MC_REMAP_TARGET_ADDRESS                  0x0c004200
++#define LOCAL_COUNT_ADDRESS                      0x0c014080
++#define LOCAL_SCRATCH_ADDRESS                    0x0c0140c0
++
++
++#define INT_STATUS_ENABLE_ERROR_MSB              7
++#define INT_STATUS_ENABLE_ERROR_LSB              7
++#define INT_STATUS_ENABLE_ERROR_MASK             0x00000080
++#define INT_STATUS_ENABLE_ERROR_GET(x)           (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB)
++#define INT_STATUS_ENABLE_ERROR_SET(x)           (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK)
++
++#define INT_STATUS_ENABLE_CPU_MSB                6
++#define INT_STATUS_ENABLE_CPU_LSB                6
++#define INT_STATUS_ENABLE_CPU_MASK               0x00000040
++#define INT_STATUS_ENABLE_CPU_GET(x)             (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB)
++#define INT_STATUS_ENABLE_CPU_SET(x)             (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK)
++
++#define INT_STATUS_ENABLE_COUNTER_MSB            4
++#define INT_STATUS_ENABLE_COUNTER_LSB            4
++#define INT_STATUS_ENABLE_COUNTER_MASK           0x00000010
++#define INT_STATUS_ENABLE_COUNTER_GET(x)         (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB)
++#define INT_STATUS_ENABLE_COUNTER_SET(x)         (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK)
++
++#define INT_STATUS_ENABLE_MBOX_DATA_MSB          3
++#define INT_STATUS_ENABLE_MBOX_DATA_LSB          0
++#define INT_STATUS_ENABLE_MBOX_DATA_MASK         0x0000000f
++#define INT_STATUS_ENABLE_MBOX_DATA_GET(x)       (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB)
++#define INT_STATUS_ENABLE_MBOX_DATA_SET(x)       (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK)
++
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB     1
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB     1
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK    0x00000002
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x)  (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB)
++#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x)  (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK)
++
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB      0
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB      0
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK     0x00000001
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x)   (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB)
++#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x)   (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK)
++
++
++#define CPU_INT_STATUS_ENABLE_BIT_MSB            7
++#define CPU_INT_STATUS_ENABLE_BIT_LSB            0
++#define CPU_INT_STATUS_ENABLE_BIT_MASK           0x000000ff
++#define CPU_INT_STATUS_ENABLE_BIT_GET(x)         (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB)
++#define CPU_INT_STATUS_ENABLE_BIT_SET(x)         (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK)
++
++#define COUNTER_INT_STATUS_ENABLE_BIT_MSB        7
++#define COUNTER_INT_STATUS_ENABLE_BIT_LSB        0
++#define COUNTER_INT_STATUS_ENABLE_BIT_MASK       0x000000ff
++#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x)     (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB)
++#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x)     (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK)
++
++#define ERROR_INT_STATUS_WAKEUP_MSB              2
++#define ERROR_INT_STATUS_WAKEUP_LSB              2
++#define ERROR_INT_STATUS_WAKEUP_MASK             0x00000004
++#define ERROR_INT_STATUS_WAKEUP_GET(x)           (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB)
++#define ERROR_INT_STATUS_WAKEUP_SET(x)           (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK)
++
++#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB        1
++#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB        1
++#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK       0x00000002
++#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x)     (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB)
++#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x)     (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK)
++
++#define ERROR_INT_STATUS_TX_OVERFLOW_MSB         0
++#define ERROR_INT_STATUS_TX_OVERFLOW_LSB         0
++#define ERROR_INT_STATUS_TX_OVERFLOW_MASK        0x00000001
++#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x)      (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB)
++#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x)      (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK)
++
++#define HOST_INT_STATUS_ERROR_MSB                7
++#define HOST_INT_STATUS_ERROR_LSB                7
++#define HOST_INT_STATUS_ERROR_MASK               0x00000080
++#define HOST_INT_STATUS_ERROR_GET(x)             (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB)
++#define HOST_INT_STATUS_ERROR_SET(x)             (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK)
++
++#define HOST_INT_STATUS_CPU_MSB                  6
++#define HOST_INT_STATUS_CPU_LSB                  6
++#define HOST_INT_STATUS_CPU_MASK                 0x00000040
++#define HOST_INT_STATUS_CPU_GET(x)               (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB)
++#define HOST_INT_STATUS_CPU_SET(x)               (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK)
++
++#define HOST_INT_STATUS_COUNTER_MSB              4
++#define HOST_INT_STATUS_COUNTER_LSB              4
++#define HOST_INT_STATUS_COUNTER_MASK             0x00000010
++#define HOST_INT_STATUS_COUNTER_GET(x)           (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB)
++#define HOST_INT_STATUS_COUNTER_SET(x)           (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK)
++
++#define RESET_CONTROL_WARM_RST_MSB               7
++#define RESET_CONTROL_WARM_RST_LSB               7
++#define RESET_CONTROL_WARM_RST_MASK              0x00000080
++#define RESET_CONTROL_WARM_RST_GET(x)            (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB)
++#define RESET_CONTROL_WARM_RST_SET(x)            (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK)
++
++#define RESET_CONTROL_COLD_RST_MSB               8
++#define RESET_CONTROL_COLD_RST_LSB               8
++#define RESET_CONTROL_COLD_RST_MASK              0x00000100
++#define RESET_CONTROL_COLD_RST_GET(x)            (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB)
++#define RESET_CONTROL_COLD_RST_SET(x)            (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK)
++
++#define RESET_CAUSE_LAST_MSB                     2
++#define RESET_CAUSE_LAST_LSB                     0
++#define RESET_CAUSE_LAST_MASK                    0x00000007
++#define RESET_CAUSE_LAST_GET(x)                  (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB)
++#define RESET_CAUSE_LAST_SET(x)                  (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* __AR6KHWREG_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6K_version.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6K_version.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6K_version.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6K_version.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,36 @@
++#define __VER_MAJOR_ 2
++#define __VER_MINOR_ 0
++#define __VER_PATCH_ 0
++
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * The makear6ksdk script (used for release builds) modifies the following line.
++ */
++#define __BUILD_NUMBER_ 18
++
++
++/* Format of the version number. */
++#define VER_MAJOR_BIT_OFFSET          28
++#define VER_MINOR_BIT_OFFSET          24
++#define VER_PATCH_BIT_OFFSET          16
++#define VER_BUILD_NUM_BIT_OFFSET      0
++
++
++/*
++ * The version has the following format:
++ * Bits 28-31: Major version
++ * Bits 24-27: Minor version
++ * Bits 16-23: Patch version
++ * Bits 0-15:  Build number (automatically generated during build process )
++ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
++ *
++ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
++ */
++#define AR6K_SW_VERSION       ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6K_version.h.NEW linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6K_version.h.NEW
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/AR6K_version.h.NEW    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/AR6K_version.h.NEW 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,36 @@
++#define __VER_MAJOR_ 2
++#define __VER_MINOR_ 0
++#define __VER_PATCH_ 0
++
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * The makear6ksdk script (used for release builds) modifies the following line.
++ */
++#define __BUILD_NUMBER_ 18
++
++
++/* Format of the version number. */
++#define VER_MAJOR_BIT_OFFSET          28
++#define VER_MINOR_BIT_OFFSET          24
++#define VER_PATCH_BIT_OFFSET          16
++#define VER_BUILD_NUM_BIT_OFFSET      0
++
++
++/*
++ * The version has the following format:
++ * Bits 28-31: Major version
++ * Bits 24-27: Minor version
++ * Bits 16-23: Patch version
++ * Bits 0-15:  Build number (automatically generated during build process )
++ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
++ *
++ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
++ */
++#define AR6K_SW_VERSION       ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/athdefs.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athdefs.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/athdefs.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athdefs.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,85 @@
++#ifndef __ATHDEFS_H__
++#define __ATHDEFS_H__
++
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains definitions that may be used across both
++ * Host and Target software.  Nothing here is module-dependent
++ * or platform-dependent.
++ */
++
++/*
++ * Generic error codes that can be used by hw, sta, ap, sim, dk
++ * and any other environments. Since these are enums, feel free to
++ * add any more codes that you need.
++ */
++
++typedef enum {
++    A_ERROR = -1,               /* Generic error return */
++    A_OK = 0,                   /* success */
++                                /* Following values start at 1 */
++    A_DEVICE_NOT_FOUND,         /* not able to find PCI device */
++    A_NO_MEMORY,                /* not able to allocate memory, not available */
++    A_MEMORY_NOT_AVAIL,         /* memory region is not free for mapping */
++    A_NO_FREE_DESC,             /* no free descriptors available */
++    A_BAD_ADDRESS,              /* address does not match descriptor */
++    A_WIN_DRIVER_ERROR,         /* used in NT_HW version, if problem at init */
++    A_REGS_NOT_MAPPED,          /* registers not correctly mapped */
++    A_EPERM,                    /* Not superuser */
++    A_EACCES,                   /* Access denied */
++    A_ENOENT,                   /* No such entry, search failed, etc. */
++    A_EEXIST,                   /* The object already exists (can't create) */
++    A_EFAULT,                   /* Bad address fault */
++    A_EBUSY,                    /* Object is busy */
++    A_EINVAL,                   /* Invalid parameter */
++    A_EMSGSIZE,                 /* Inappropriate message buffer length */
++    A_ECANCELED,                /* Operation canceled */
++    A_ENOTSUP,                  /* Operation not supported */
++    A_ECOMM,                    /* Communication error on send */
++    A_EPROTO,                   /* Protocol error */
++    A_ENODEV,                   /* No such device */
++    A_EDEVNOTUP,                /* device is not UP */
++    A_NO_RESOURCE,              /* No resources for requested operation */
++    A_HARDWARE,                 /* Hardware failure */
++    A_PENDING,                  /* Asynchronous routine; will send up results la
++ter (typically in callback) */
++    A_EBADCHANNEL,              /* The channel cannot be used */
++    A_DECRYPT_ERROR,            /* Decryption error */
++    A_PHY_ERROR,                /* RX PHY error */
++    A_CONSUMED                  /* Object was consumed */
++} A_STATUS;
++
++#define A_SUCCESS(x)        (x == A_OK)
++#define A_FAILED(x)         (!A_SUCCESS(x))
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++/*
++ * The following definition is WLAN specific definition
++ */
++typedef enum {
++    MODE_11A = 0,   /* 11a Mode */
++    MODE_11G = 1,   /* 11g + 11b Mode */
++    MODE_11B = 2,   /* 11b Mode */
++    MODE_11GONLY = 3, /* 11g only Mode */
++    MODE_UNKNOWN = 4,
++    MODE_MAX = 4
++} WLAN_PHY_MODE;
++
++typedef enum {
++    WLAN_11A_CAPABILITY   = 1,
++    WLAN_11G_CAPABILITY   = 2,
++    WLAN_11AG_CAPABILITY  = 3,
++}WLAN_CAPABILITY;
++
++#endif /* __ATHDEFS_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/athdrv.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athdrv.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/athdrv.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athdrv.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,32 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _ATHDRV_H_
++#define _ATHDRV_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _ATHDRV_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/athendpack.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athendpack.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/athendpack.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athendpack.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,41 @@
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ * @file: athendpack.h
++ *
++ * @abstract: end compiler-specific structure packing
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#ifdef VXWORKS
++#endif /* VXWORKS */
++
++#ifdef LINUX
++#endif /* LINUX */
++
++#ifdef QNX
++#endif /* QNX */
++
++#ifdef INTEGRITY
++#include "integrity/athendpack_integrity.h"
++#endif /* INTEGRITY */
++
++#ifdef NUCLEUS
++#endif /* NUCLEUS */
++
++#ifdef UNDER_CE
++#include "../os/wince/include/athendpack_wince.h"
++#endif /* WINCE */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/athstartpack.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athstartpack.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/athstartpack.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/athstartpack.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,42 @@
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ * @file: athstartpack.h
++ *
++ * @abstract: start compiler-specific structure packing
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef VXWORKS
++#endif /* VXWORKS */
++
++#ifdef LINUX
++#endif /* LINUX */
++
++#ifdef QNX
++#endif /* QNX */
++
++#ifdef INTEGRITY
++#include "integrity/athstartpack_integrity.h"
++#endif /* INTEGRITY */
++
++#ifdef NUCLEUS
++#endif /* NUCLEUS */
++
++#ifdef UNDER_CE
++#include "../os/wince/include/athstartpack_wince.h"
++#endif /* WINCE */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_types.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_types.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/a_types.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/a_types.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,28 @@
++#ifndef _A_TYPES_H_
++#define _A_TYPES_H_
++/*
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $
++ *
++ * This file contains the definitions of the basic atheros data types.
++ * It is used to map the data types in atheros files to a platform specific
++ * type.
++ *
++ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "../ar6000/athtypes_linux.h"
++
++#endif /* _ATHTYPES_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/bmi.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/bmi.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/bmi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/bmi.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,100 @@
++#ifndef _BMI_H_
++#define _BMI_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * BMI declarations and prototypes
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "hif.h"
++#include "a_osapi.h"
++#include "bmi_msg.h"
++
++void
++BMIInit(void);
++
++A_STATUS
++BMIDone(HIF_DEVICE *device);
++
++A_STATUS
++BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info);
++
++A_STATUS
++BMIReadMemory(HIF_DEVICE *device,
++              A_UINT32 address,
++              A_UCHAR *buffer,
++              A_UINT32 length);
++
++A_STATUS
++BMIWriteMemory(HIF_DEVICE *device,
++               A_UINT32 address,
++               A_UCHAR *buffer,
++               A_UINT32 length);
++
++A_STATUS
++BMIExecute(HIF_DEVICE *device,
++           A_UINT32 address,
++           A_UINT32 *param);
++
++A_STATUS
++BMISetAppStart(HIF_DEVICE *device,
++               A_UINT32 address);
++
++A_STATUS
++BMIReadSOCRegister(HIF_DEVICE *device,
++                   A_UINT32 address,
++                   A_UINT32 *param);
++
++A_STATUS
++BMIWriteSOCRegister(HIF_DEVICE *device,
++                    A_UINT32 address,
++                    A_UINT32 param);
++
++A_STATUS
++BMIrompatchInstall(HIF_DEVICE *device,
++                   A_UINT32 ROM_addr,
++                   A_UINT32 RAM_addr,
++                   A_UINT32 nbytes,
++                   A_UINT32 do_activate,
++                   A_UINT32 *patch_id);
++
++A_STATUS
++BMIrompatchUninstall(HIF_DEVICE *device,
++                     A_UINT32 rompatch_id);
++
++A_STATUS
++BMIrompatchActivate(HIF_DEVICE *device,
++                    A_UINT32 rompatch_count,
++                    A_UINT32 *rompatch_list);
++
++A_STATUS
++BMIrompatchDeactivate(HIF_DEVICE *device,
++                      A_UINT32 rompatch_count,
++                      A_UINT32 *rompatch_list);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _BMI_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/bmi_msg.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/bmi_msg.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/bmi_msg.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/bmi_msg.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,199 @@
++#ifndef __BMI_MSG_H__
++#define __BMI_MSG_H__
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * Bootloader Messaging Interface (BMI)
++ *
++ * BMI is a very simple messaging interface used during initialization
++ * to read memory, write memory, execute code, and to define an
++ * application entry PC.
++ *
++ * It is used to download an application to AR6K, to provide
++ * patches to code that is already resident on AR6K, and generally
++ * to examine and modify state.  The Host has an opportunity to use
++ * BMI only once during bootup.  Once the Host issues a BMI_DONE
++ * command, this opportunity ends.
++ *
++ * The Host writes BMI requests to mailbox0, and reads BMI responses
++ * from mailbox0.   BMI requests all begin with a command
++ * (see below for specific commands), and are followed by
++ * command-specific data.
++ *
++ * Flow control:
++ * The Host can only issue a command once the Target gives it a
++ * "BMI Command Credit", using AR6K Counter #4.  As soon as the
++ * Target has completed a command, it issues another BMI Command
++ * Credit (so the Host can issue the next command).
++ *
++ * BMI handles all required Target-side cache flushing.
++ */
++
++
++/* Maximum data size used for BMI transfers */
++#define BMI_DATASZ_MAX                     32
++
++/* BMI Commands */
++
++#define BMI_NO_COMMAND                      0
++
++#define BMI_DONE                            1
++        /*
++         * Semantics: Host is done using BMI
++         * Request format:
++         *    A_UINT32      command (BMI_DONE)
++         * Response format: none
++         */
++
++#define BMI_READ_MEMORY                     2
++        /*
++         * Semantics: Host reads AR6K memory
++         * Request format:
++         *    A_UINT32      command (BMI_READ_MEMORY)
++         *    A_UINT32      address
++         *    A_UINT32      length, at most BMI_DATASZ_MAX
++         * Response format:
++         *    A_UINT8       data[length]
++         */
++
++#define BMI_WRITE_MEMORY                    3
++        /*
++         * Semantics: Host writes AR6K memory
++         * Request format:
++         *    A_UINT32       command (BMI_WRITE_MEMORY)
++         *    A_UINT32      address
++         *    A_UINT32      length, at most BMI_DATASZ_MAX
++         *    A_UINT8       data[length]
++         * Response format: none
++         */
++
++#define BMI_EXECUTE                         4
++        /*
++         * Semantics: Causes AR6K to execute code
++         * Request format:
++         *    A_UINT32      command (BMI_EXECUTE)
++         *    A_UINT32      address
++         *    A_UINT32      parameter
++         * Response format:
++         *    A_UINT32      return value
++         */
++
++#define BMI_SET_APP_START                   5
++        /*
++         * Semantics: Set Target application starting address
++         * Request format:
++         *    A_UINT32      command (BMI_SET_APP_START)
++         *    A_UINT32      address
++         * Response format: none
++         */
++
++#define BMI_READ_SOC_REGISTER               6
++        /*
++         * Semantics: Read a 32-bit Target SOC register.
++         * Request format:
++         *    A_UINT32      command (BMI_READ_REGISTER)
++         *    A_UINT32      address
++         * Response format:
++         *    A_UINT32      value
++         */
++
++#define BMI_WRITE_SOC_REGISTER              7
++        /*
++         * Semantics: Write a 32-bit Target SOC register.
++         * Request format:
++         *    A_UINT32      command (BMI_WRITE_REGISTER)
++         *    A_UINT32      address
++         *    A_UINT32      value
++         *
++         * Response format: none
++         */
++
++#define BMI_GET_TARGET_ID                  8
++#define BMI_GET_TARGET_INFO                8
++        /*
++         * Semantics: Fetch the 4-byte Target information
++         * Request format:
++         *    A_UINT32      command (BMI_GET_TARGET_ID/INFO)
++         * Response format1 (old firmware):
++         *    A_UINT32      TargetVersionID
++         * Response format2 (newer firmware):
++         *    A_UINT32      TARGET_VERSION_SENTINAL
++         *    struct bmi_target_info;
++         */
++
++struct bmi_target_info {
++    A_UINT32 target_info_byte_count; /* size of this structure */
++    A_UINT32 target_ver;             /* Target Version ID */
++    A_UINT32 target_type;            /* Target type */
++};
++#define TARGET_VERSION_SENTINAL 0xffffffff
++#define TARGET_TYPE_AR6001 1
++#define TARGET_TYPE_AR6002 2
++
++
++#define BMI_ROMPATCH_INSTALL               9
++        /*
++         * Semantics: Install a ROM Patch.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_INSTALL)
++         *    A_UINT32      Target ROM Address
++         *    A_UINT32      Target RAM Address
++         *    A_UINT32      Size, in bytes
++         *    A_UINT32      Activate? 1-->activate;
++         *                            0-->install but do not activate
++         * Response format:
++         *    A_UINT32      PatchID
++         */
++
++#define BMI_ROMPATCH_UNINSTALL             10
++        /*
++         * Semantics: Uninstall a previously-installed ROM Patch,
++         * automatically deactivating, if necessary.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_UNINSTALL)
++         *    A_UINT32      PatchID
++         *
++         * Response format: none
++         */
++
++#define BMI_ROMPATCH_ACTIVATE              11
++        /*
++         * Semantics: Activate a list of previously-installed ROM Patches.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_ACTIVATE)
++         *    A_UINT32      rompatch_count
++         *    A_UINT32      PatchID[rompatch_count]
++         *
++         * Response format: none
++         */
++
++#define BMI_ROMPATCH_DEACTIVATE            12
++        /*
++         * Semantics: Deactivate a list of active ROM Patches.
++         * Request format:
++         *    A_UINT32      command (BMI_ROMPATCH_DEACTIVATE)
++         *    A_UINT32      rompatch_count
++         *    A_UINT32      PatchID[rompatch_count]
++         *
++         * Response format: none
++         */
++
++
++#endif /* __BMI_MSG_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/common_drv.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/common_drv.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/common_drv.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/common_drv.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,61 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++
++#ifndef COMMON_DRV_H_
++#define COMMON_DRV_H_
++
++#include "hif.h"
++#include "htc_packet.h"
++
++
++
++/* structure that is the state information for the default credit distribution callback
++ * drivers should instantiate (zero-init as well) this structure in their driver instance
++ * and pass it as a context to the HTC credit distribution functions */
++typedef struct _COMMON_CREDIT_STATE_INFO {
++    int TotalAvailableCredits;      /* total credits in the system at startup */
++    int CurrentFreeCredits;         /* credits available in the pool that have not been
++                                       given out to endpoints */
++    HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist;  /* pointer to the lowest priority endpoint dist struct */
++} COMMON_CREDIT_STATE_INFO;
++
++
++/* HTC TX packet tagging definitions */
++#define AR6K_CONTROL_PKT_TAG    HTC_TX_PACKET_TAG_USER_DEFINED
++#define AR6K_DATA_PKT_TAG       (AR6K_CONTROL_PKT_TAG + 1)
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* OS-independent APIs */
++A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo);
++A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
++A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,  A_UCHAR *data, A_UINT32 length);
++A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
++void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
++A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /*COMMON_DRV_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog_api.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog_api.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,46 @@
++#ifndef _DBGLOG_API_H_
++#define _DBGLOG_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * This file contains host side debug primitives.
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dbglog.h"
++
++#define DBGLOG_HOST_LOG_BUFFER_SIZE            DBGLOG_LOG_BUFFER_SIZE
++
++#define DBGLOG_GET_DBGID(arg) \
++    ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
++
++#define DBGLOG_GET_MODULEID(arg) \
++    ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
++
++#define DBGLOG_GET_NUMARGS(arg) \
++    ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
++
++#define DBGLOG_GET_TIMESTAMP(arg) \
++    ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,107 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions and data structures associated with
++ * the log based debug mechanism.
++ *
++ */
++
++#ifndef _DBGLOG_H_
++#define _DBGLOG_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define DBGLOG_TIMESTAMP_OFFSET          0
++#define DBGLOG_TIMESTAMP_MASK            0x0000FFFF /* Bit 0-15. Contains bit
++                                                       8-23 of the LF0 timer */
++#define DBGLOG_DBGID_OFFSET              16
++#define DBGLOG_DBGID_MASK                0x03FF0000 /* Bit 16-25 */
++#define DBGLOG_DBGID_NUM_MAX             256 /* Upper limit is width of mask */
++
++#define DBGLOG_MODULEID_OFFSET           26
++#define DBGLOG_MODULEID_MASK             0x3C000000 /* Bit 26-29 */
++#define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
++
++/*
++ * Please ensure that the definition of any new module intrduced is captured
++ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The
++ * structure is required for the parser to correctly pick up the values for
++ * different modules.
++ */
++#define DBGLOG_MODULEID_START
++#define DBGLOG_MODULEID_INF                   0
++#define DBGLOG_MODULEID_WMI                   1
++#define DBGLOG_MODULEID_CSERV                 2
++#define DBGLOG_MODULEID_PM                    3
++#define DBGLOG_MODULEID_TXRX_MGMTBUF          4
++#define DBGLOG_MODULEID_TXRX_TXBUF            5
++#define DBGLOG_MODULEID_TXRX_RXBUF            6
++#define DBGLOG_MODULEID_WOW                   7
++#define DBGLOG_MODULEID_WHAL                  8
++#define DBGLOG_MODULEID_END
++
++#define DBGLOG_NUM_ARGS_OFFSET             30
++#define DBGLOG_NUM_ARGS_MASK               0xC0000000 /* Bit 30-31 */
++#define DBGLOG_NUM_ARGS_MAX                2 /* Upper limit is width of mask */
++
++#define DBGLOG_MODULE_LOG_ENABLE_OFFSET    0
++#define DBGLOG_MODULE_LOG_ENABLE_MASK      0x0000FFFF
++
++#define DBGLOG_REPORTING_ENABLED_OFFSET    16
++#define DBGLOG_REPORTING_ENABLED_MASK      0x00010000
++
++#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17
++#define DBGLOG_TIMESTAMP_RESOLUTION_MASK   0x000E0000
++
++#define DBGLOG_REPORT_SIZE_OFFSET          20
++#define DBGLOG_REPORT_SIZE_MASK            0x3FF00000
++
++#define DBGLOG_LOG_BUFFER_SIZE             1500
++#define DBGLOG_DBGID_DEFINITION_LEN_MAX    64
++
++struct dbglog_buf_s {
++    struct dbglog_buf_s *next;
++    A_INT8              *buffer;
++    A_UINT32             bufsize;
++    A_UINT32             length;
++    A_UINT32             count;
++    A_UINT32             free;
++};
++
++struct dbglog_hdr_s {
++    struct dbglog_buf_s *dbuf;
++    A_UINT32             dropped;
++};
++
++struct dbglog_config_s {
++    A_UINT32                    cfgvalid; /* Mask with valid config bits */
++    union {
++        /* TODO: Take care of endianness */
++        struct {
++            A_UINT32            mmask:16; /* Mask of modules with logging on */
++            A_UINT32            rep:1; /* Reporting enabled or not */
++            A_UINT32            tsr:3; /* Time stamp resolution. Def: 1 ms */
++            A_UINT32            size:10; /* Report size in number of messages */
++            A_UINT32            reserved:2;
++        } dbglog_config;
++
++        A_UINT32                value;
++    } u;
++};
++
++#define cfgmmask                   u.dbglog_config.mmask
++#define cfgrep                     u.dbglog_config.rep
++#define cfgtsr                     u.dbglog_config.tsr
++#define cfgsize                    u.dbglog_config.size
++#define cfgvalue                   u.value
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog_id.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog_id.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dbglog_id.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dbglog_id.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,307 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions of the debug identifiers for different
++ * modules.
++ *
++ */
++
++#ifndef _DBGLOG_ID_H_
++#define _DBGLOG_ID_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
++ * Please ensure that the definition of any new debugid introduced is captured
++ * between the <MODULE>_DBGID_DEFINITION_START and
++ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
++ * parser to correctly pick up the values for different debug identifiers.
++ */
++
++/* INF debug identifier definitions */
++#define INF_DBGID_DEFINITION_START
++#define INF_ASSERTION_FAILED                          1
++#define INF_TARGET_ID                                 2
++#define INF_DBGID_DEFINITION_END
++
++/* WMI debug identifier definitions */
++#define WMI_DBGID_DEFINITION_START
++#define WMI_CMD_RX_XTND_PKT_TOO_SHORT                 1
++#define WMI_EXTENDED_CMD_NOT_HANDLED                  2
++#define WMI_CMD_RX_PKT_TOO_SHORT                      3
++#define WMI_CALLING_WMI_EXTENSION_FN                  4
++#define WMI_CMD_NOT_HANDLED                           5
++#define WMI_IN_SYNC                                   6
++#define WMI_TARGET_WMI_SYNC_CMD                       7
++#define WMI_SET_SNR_THRESHOLD_PARAMS                  8
++#define WMI_SET_RSSI_THRESHOLD_PARAMS                 9
++#define WMI_SET_LQ_TRESHOLD_PARAMS                   10
++#define WMI_TARGET_CREATE_PSTREAM_CMD                11
++#define WMI_WI_DTM_INUSE                             12
++#define WMI_TARGET_DELETE_PSTREAM_CMD                13
++#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD       14
++#define WMI_TARGET_GET_BIT_RATE_CMD                  15
++#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS       16
++#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD        17
++#define WMI_TARGET_GET_TX_PWR_CMD                    18
++#define WMI_FREE_EVBUF_WMIBUF                        19
++#define WMI_FREE_EVBUF_DATABUF                       20
++#define WMI_FREE_EVBUF_BADFLAG                       21
++#define WMI_HTC_RX_ERROR_DATA_PACKET                 22
++#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX             23
++#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT      24
++#define WMI_SENDING_READY_EVENT                      25
++#define WMI_SETPOWER_MDOE_TO_MAXPERF                 26
++#define WMI_SETPOWER_MDOE_TO_REC                     27
++#define WMI_BSSINFO_EVENT_FROM                       28
++#define WMI_TARGET_GET_STATS_CMD                     29
++#define WMI_SENDING_SCAN_COMPLETE_EVENT              30
++#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT        31
++#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT       32
++#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT     33
++#define WMI_SENDING_ERROR_REPORT_EVENT               34
++#define WMI_SENDING_CAC_EVENT                        35
++#define WMI_TARGET_GET_ROAM_TABLE_CMD                36
++#define WMI_TARGET_GET_ROAM_DATA_CMD                 37
++#define WMI_SENDING_GPIO_INTR_EVENT                  38
++#define WMI_SENDING_GPIO_ACK_EVENT                   39
++#define WMI_SENDING_GPIO_DATA_EVENT                  40
++#define WMI_CMD_RX                                   41
++#define WMI_CMD_RX_XTND                              42
++#define WMI_EVENT_SEND                               43
++#define WMI_EVENT_SEND_XTND                          44
++#define WMI_DBGID_DEFINITION_END
++
++/* CSERV debug identifier definitions */
++#define CSERV_DBGID_DEFINITION_START
++#define CSERV_BEGIN_SCAN1                             1
++#define CSERV_BEGIN_SCAN2                             2
++#define CSERV_END_SCAN1                               3
++#define CSERV_END_SCAN2                               4
++#define CSERV_CHAN_SCAN_START                         5
++#define CSERV_CHAN_SCAN_STOP                          6
++#define CSERV_CHANNEL_OPPPORTUNITY                    7
++#define CSERV_NC_TIMEOUT                              8
++#define CSERV_BACK_HOME                              10
++#define CSERV_CHMGR_CH_CALLBACK1                     11
++#define CSERV_CHMGR_CH_CALLBACK2                     12
++#define CSERV_CHMGR_CH_CALLBACK3                     13
++#define CSERV_SET_SCAN_PARAMS1                       14
++#define CSERV_SET_SCAN_PARAMS2                       15
++#define CSERV_SET_SCAN_PARAMS3                       16
++#define CSERV_SET_SCAN_PARAMS4                       17
++#define CSERV_ABORT_SCAN                             18
++#define CSERV_NEWSTATE                               19
++#define CSERV_MINCHMGR_OP_END                        20
++#define CSERV_CHMGR_OP_END                           21
++#define CSERV_DISCONNECT_TIMEOUT                     22
++#define CSERV_ROAM_TIMEOUT                           23
++#define CSERV_FORCE_SCAN1                            24
++#define CSERV_FORCE_SCAN2                            25
++#define CSERV_FORCE_SCAN3                            26
++#define CSERV_UTIL_TIMEOUT                           27
++#define CSERV_RSSIPOLLER                             28
++#define CSERV_RETRY_CONNECT_TIMEOUT                  29
++#define CSERV_RSSIINDBMPOLLER                        30
++#define CSERV_BGSCAN_ENABLE                          31
++#define CSERV_BGSCAN_DISABLE                         32
++#define CSERV_WLAN_START_SCAN_CMD1                   33
++#define CSERV_WLAN_START_SCAN_CMD2                   34
++#define CSERV_WLAN_START_SCAN_CMD3                   35
++#define CSERV_START_SCAN_CMD                         36
++#define CSERV_START_FORCE_SCAN                       37
++#define CSERV_NEXT_CHAN                              38
++#define CSERV_SET_REGCODE                            39
++#define CSERV_START_ADHOC                            40
++#define CSERV_ADHOC_AT_HOME                          41
++#define CSERV_OPT_AT_HOME                            42
++#define CSERV_WLAN_CONNECT_CMD                       43
++#define CSERV_WLAN_RECONNECT_CMD                     44
++#define CSERV_WLAN_DISCONNECT_CMD                    45
++#define CSERV_BSS_CHANGE_CHANNEL                     46
++#define CSERV_BEACON_RX                              47
++#define CSERV_KEEPALIVE_CHECK                        48
++#define CSERV_RC_BEGIN_SCAN                          49
++#define CSERV_RC_SCAN_START                          50
++#define CSERV_RC_SCAN_STOP                           51
++#define CSERV_RC_NEXT                                52
++#define CSERV_RC_SCAN_END                            53
++#define CSERV_PROBE_CALLBACK                         54
++#define CSERV_ROAM1                                  55
++#define CSERV_ROAM2                                  56
++#define CSERV_ROAM3                                  57
++#define CSERV_CONNECT_EVENT                          58
++#define CSERV_DISCONNECT_EVENT                       59
++#define CSERV_BMISS_HANDLER1                         60
++#define CSERV_BMISS_HANDLER2                         61
++#define CSERV_BMISS_HANDLER3                         62
++#define CSERV_LOWRSSI_HANDLER                        63
++#define CSERV_WLAN_SET_PMKID_CMD                     64
++#define CSERV_RECONNECT_REQUEST                      65
++#define CSERV_KEYSPLUMBED_EVENT                      66
++#define CSERV_NEW_REG                                67
++#define CSERV_SET_RSSI_THOLD                         68
++#define CSERV_RSSITHRESHOLDCHECK                     69
++#define CSERV_RSSIINDBMTHRESHOLDCHECK                70
++#define CSERV_WLAN_SET_OPT_CMD1                      71
++#define CSERV_WLAN_SET_OPT_CMD2                      72
++#define CSERV_WLAN_SET_OPT_CMD3                      73
++#define CSERV_WLAN_SET_OPT_CMD4                      74
++#define CSERV_SCAN_CONNECT_STOP                      75
++#define CSERV_BMISS_HANDLER4                         76
++#define CSERV_INITIALIZE_TIMER                       77
++#define CSERV_ARM_TIMER                              78
++#define CSERV_DISARM_TIMER                           79
++#define CSERV_UNINITIALIZE_TIMER                     80
++#define CSERV_DISCONNECT_EVENT2                      81
++#define CSERV_SCAN_CONNECT_START                     82
++#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED            83
++#define CSERV_SET_SCAN_PARAMS5                       84
++#define CSERV_DBGID_DEFINITION_END
++
++/* TXRX debug identifier definitions */
++#define TXRX_TXBUF_DBGID_DEFINITION_START
++#define TXRX_TXBUF_ALLOCATE_BUF                      1
++#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX                 2
++#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ                  3
++#define TXRX_TXBUF_TXQ_DEPTH                         4
++#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ                 5
++#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ         6
++#define TXRX_TXBUF_INITIALIZE_TIMER                  7
++#define TXRX_TXBUF_ARM_TIMER                         8
++#define TXRX_TXBUF_DISARM_TIMER                      9
++#define TXRX_TXBUF_UNINITIALIZE_TIMER                10
++#define TXRX_TXBUF_DBGID_DEFINITION_END
++
++#define TXRX_RXBUF_DBGID_DEFINITION_START
++#define TXRX_RXBUF_ALLOCATE_BUF                      1
++#define TXRX_RXBUF_QUEUE_TO_HOST                     2
++#define TXRX_RXBUF_QUEUE_TO_WLAN                     3
++#define TXRX_RXBUF_ZERO_LEN_BUF                      4
++#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN  5
++#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF        6
++#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN         7
++#define TXRX_RXBUF_SEND_TO_RECV_MGMT                 8
++#define TXRX_RXBUF_SEND_TO_IEEE_LAYER                9
++#define TXRX_RXBUF_DBGID_DEFINITION_END
++
++#define TXRX_MGMTBUF_DBGID_DEFINITION_START
++#define TXRX_MGMTBUF_ALLOCATE_BUF                    1
++#define TXRX_MGMTBUF_ALLOCATE_SM_BUF                 2
++#define TXRX_MGMTBUF_ALLOCATE_RMBUF                  3
++#define TXRX_MGMTBUF_GET_BUF                         4
++#define TXRX_MGMTBUF_GET_SM_BUF                      5
++#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ                6
++#define TXRX_MGMTBUF_REAPED_BUF                      7
++#define TXRX_MGMTBUF_REAPED_SM_BUF                   8
++#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN              9
++#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN          10
++#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ                11
++#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ                12
++#define TXRX_MGMTBUF_PAUSE_TXQ                       13
++#define TXRX_MGMTBUF_RESUME_TXQ                      14
++#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT       15
++#define TXRX_MGMTBUF_DRAINQ                          16
++#define TXRX_MGMTBUF_INDICATE_Q_DRAINED              17
++#define TXRX_MGMTBUF_DBGID_DEFINITION_END
++
++/* PM (Power Module) debug identifier definitions */
++#define PM_DBGID_DEFINITION_START
++#define PM_INIT                                      1
++#define PM_ENABLE                                    2
++#define PM_SET_STATE                                 3
++#define PM_SET_POWERMODE                             4
++#define PM_CONN_NOTIFY                               5
++#define PM_REF_COUNT_NEGATIVE                        6
++#define PM_APSD_ENABLE                               7
++#define PM_UPDATE_APSD_STATE                         8
++#define PM_CHAN_OP_REQ                               9
++#define PM_SET_MY_BEACON_POLICY                      10
++#define PM_SET_ALL_BEACON_POLICY                     11
++#define PM_SET_PM_PARAMS1                            12
++#define PM_SET_PM_PARAMS2                            13
++#define PM_ADHOC_SET_PM_CAPS_FAIL                    14
++#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID              15
++#define PM_DBGID_DEFINITION_END
++
++/* Wake on Wireless debug identifier definitions */
++#define WOW_DBGID_DEFINITION_START
++#define WOW_INIT                                        1
++#define WOW_GET_CONFIG_DSET                             2
++#define WOW_NO_CONFIG_DSET                              3
++#define WOW_INVALID_CONFIG_DSET                         4
++#define WOW_USE_DEFAULT_CONFIG                          5
++#define WOW_SETUP_GPIO                                  6
++#define WOW_INIT_DONE                                   7
++#define WOW_SET_GPIO_PIN                                8
++#define WOW_CLEAR_GPIO_PIN                              9
++#define WOW_SET_WOW_MODE_CMD                            10
++#define WOW_SET_HOST_MODE_CMD                           11
++#define WOW_ADD_WOW_PATTERN_CMD                         12
++#define WOW_NEW_WOW_PATTERN_AT_INDEX                    13
++#define WOW_DEL_WOW_PATTERN_CMD                         14
++#define WOW_LIST_CONTAINS_PATTERNS                      15
++#define WOW_GET_WOW_LIST_CMD                            16
++#define WOW_INVALID_FILTER_ID                           17
++#define WOW_INVALID_FILTER_LISTID                       18
++#define WOW_NO_VALID_FILTER_AT_ID                       19
++#define WOW_NO_VALID_LIST_AT_ID                         20
++#define WOW_NUM_PATTERNS_EXCEEDED                       21
++#define WOW_NUM_LISTS_EXCEEDED                          22
++#define WOW_GET_WOW_STATS                               23
++#define WOW_CLEAR_WOW_STATS                             24
++#define WOW_WAKEUP_HOST                                 25
++#define WOW_EVENT_WAKEUP_HOST                           26
++#define WOW_EVENT_DISCARD                               27
++#define WOW_PATTERN_MATCH                               28
++#define WOW_PATTERN_NOT_MATCH                           29
++#define WOW_PATTERN_NOT_MATCH_OFFSET                    30
++#define WOW_DISABLED_HOST_ASLEEP                        31
++#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS             32
++#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND          33
++#define WOW_DBGID_DEFINITION_END
++
++/* WHAL debug identifier definitions */
++#define WHAL_DBGID_DEFINITION_START
++#define WHAL_ERROR_ANI_CONTROL                      1
++#define WHAL_ERROR_CHIP_TEST1                       2
++#define WHAL_ERROR_CHIP_TEST2                       3
++#define WHAL_ERROR_EEPROM_CHECKSUM                  4
++#define WHAL_ERROR_EEPROM_MACADDR                   5
++#define WHAL_ERROR_INTERRUPT_HIU                    6
++#define WHAL_ERROR_KEYCACHE_RESET                   7
++#define WHAL_ERROR_KEYCACHE_SET                     8
++#define WHAL_ERROR_KEYCACHE_TYPE                    9
++#define WHAL_ERROR_KEYCACHE_TKIPENTRY              10
++#define WHAL_ERROR_KEYCACHE_WEPLENGTH              11
++#define WHAL_ERROR_PHY_INVALID_CHANNEL             12
++#define WHAL_ERROR_POWER_AWAKE                     13
++#define WHAL_ERROR_POWER_SET                       14
++#define WHAL_ERROR_RECV_STOPDMA                    15
++#define WHAL_ERROR_RECV_STOPPCU                    16
++#define WHAL_ERROR_RESET_CHANNF1                   17
++#define WHAL_ERROR_RESET_CHANNF2                   18
++#define WHAL_ERROR_RESET_PM                        19
++#define WHAL_ERROR_RESET_OFFSETCAL                 20
++#define WHAL_ERROR_RESET_RFGRANT                   21
++#define WHAL_ERROR_RESET_RXFRAME                   22
++#define WHAL_ERROR_RESET_STOPDMA                   23
++#define WHAL_ERROR_RESET_RECOVER                   24
++#define WHAL_ERROR_XMIT_COMPUTE                    25
++#define WHAL_ERROR_XMIT_NOQUEUE                    26
++#define WHAL_ERROR_XMIT_ACTIVEQUEUE                27
++#define WHAL_ERROR_XMIT_BADTYPE                    28
++#define WHAL_DBGID_DEFINITION_END
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DBGLOG_ID_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dl_list.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dl_list.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dl_list.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dl_list.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++ *
++ * Double-link list definitions (adapted from Atheros SDIO stack)
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++#ifndef __DL_LIST_H___
++#define __DL_LIST_H___
++
++#define A_CONTAINING_STRUCT(address, struct_type, field_name)\
++            ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name)))
++
++/* list functions */
++/* pointers for the list */
++typedef struct _DL_LIST {
++    struct _DL_LIST *pPrev;
++    struct _DL_LIST *pNext;
++}DL_LIST, *PDL_LIST;
++/*
++ * DL_LIST_INIT , initialize doubly linked list
++*/
++#define DL_LIST_INIT(pList)\
++    {(pList)->pPrev = pList; (pList)->pNext = pList;}
++
++#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList)))
++#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext
++#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev
++/*
++ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member
++ * NOT: do not use this function if the items in the list are deleted inside the
++ * iteration loop
++*/
++#define ITERATE_OVER_LIST(pStart, pTemp) \
++    for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext)
++
++
++/* safe iterate macro that allows the item to be removed from the list
++ * the iteration continues to the next item in the list
++ */
++#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset)  \
++{                                                       \
++    PDL_LIST  pTemp;                                     \
++    pTemp = (pStart)->pNext;                            \
++    while (pTemp != (pStart)) {                         \
++        (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset);   \
++         pTemp = pTemp->pNext;                          \
++
++#define ITERATE_END }}
++
++/*
++ * DL_ListInsertTail - insert pAdd to the end of the list
++*/
++static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) {
++        /* insert at tail */
++    pAdd->pPrev = pList->pPrev;
++    pAdd->pNext = pList;
++    pList->pPrev->pNext = pAdd;
++    pList->pPrev = pAdd;
++    return pAdd;
++}
++
++/*
++ * DL_ListInsertHead - insert pAdd into the head of the list
++*/
++static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) {
++        /* insert at head */
++    pAdd->pPrev = pList;
++    pAdd->pNext = pList->pNext;
++    pList->pNext->pPrev = pAdd;
++    pList->pNext = pAdd;
++    return pAdd;
++}
++
++#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem))
++/*
++ * DL_ListRemove - remove pDel from list
++*/
++static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) {
++    pDel->pNext->pPrev = pDel->pPrev;
++    pDel->pPrev->pNext = pDel->pNext;
++        /* point back to itself just to be safe, incase remove is called again */
++    pDel->pNext = pDel;
++    pDel->pPrev = pDel;
++    return pDel;
++}
++
++/*
++ * DL_ListRemoveItemFromHead - get a list item from the head
++*/
++static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) {
++    PDL_LIST pItem = NULL;
++    if (pList->pNext != pList) {
++        pItem = pList->pNext;
++            /* remove the first item from head */
++        DL_ListRemove(pItem);
++    }
++    return pItem;
++}
++
++#endif /* __DL_LIST_H___ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dset_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dset_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dset_api.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dset_api.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $
++ *
++ * Host-side DataSet API.
++ *
++ */
++
++#ifndef _DSET_API_H_
++#define _DSET_API_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/*
++ * Host-side DataSet support is optional, and is not
++ * currently required for correct operation.  To disable
++ * Host-side DataSet support, set this to 0.
++ */
++#ifndef CONFIG_HOST_DSET_SUPPORT
++#define CONFIG_HOST_DSET_SUPPORT 1
++#endif
++
++/* Called to send a DataSet Open Reply back to the Target. */
++A_STATUS wmi_dset_open_reply(struct wmi_t *wmip,
++                             A_UINT32 status,
++                             A_UINT32 access_cookie,
++                             A_UINT32 size,
++                             A_UINT32 version,
++                             A_UINT32 targ_handle,
++                             A_UINT32 targ_reply_fn,
++                             A_UINT32 targ_reply_arg);
++
++/* Called to send a DataSet Data Reply back to the Target. */
++A_STATUS wmi_dset_data_reply(struct wmi_t *wmip,
++                             A_UINT32 status,
++                             A_UINT8 *host_buf,
++                             A_UINT32 length,
++                             A_UINT32 targ_buf,
++                             A_UINT32 targ_reply_fn,
++                             A_UINT32 targ_reply_arg);
++
++#ifdef __cplusplus
++}
++#endif /* __cplusplus */
++
++
++#endif /* _DSET_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dsetid.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dsetid.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dsetid.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dsetid.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,110 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __DSETID_H__
++#define __DSETID_H__
++
++/* Well-known DataSet IDs */
++#define DSETID_UNUSED                     0x00000000
++#define DSETID_BOARD_DATA                 0x00000001 /* Cal and board data */
++#define DSETID_REGDB                      0x00000002 /* Regulatory Database */
++#define DSETID_POWER_CONTROL              0x00000003 /* TX Pwr Lim & Ant Gain */
++#define DSETID_USER_CONFIG                0x00000004 /* User Configuration */
++
++#define DSETID_ANALOG_CONTROL_DATA_START  0x00000005
++#define DSETID_ANALOG_CONTROL_DATA_END    0x00000025
++/*
++ * Get DSETID for various reference clock speeds.
++ * For each speed there are three DataSets that correspond
++ * to the three columns of bank6 data (addr, 11a, 11b/g).
++ * This macro returns the dsetid of the first of those
++ * three DataSets.
++ */
++#define ANALOG_CONTROL_DATA_DSETID(refclk) \
++        (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
++
++/*
++ * There are TWO STARTUP_PATCH DataSets.
++ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
++ * earlier systems.  On AR6002, it is applied after BMI, just like
++ * DSETID_STARTUP_PATCH2.
++ */
++#define DSETID_STARTUP_PATCH              0x00000026
++#define DSETID_GPIO_CONFIG_PATCH          0x00000027
++#define DSETID_WLANREGS                   0x00000028 /* override wlan regs */
++#define DSETID_STARTUP_PATCH2             0x00000029
++
++#define DSETID_WOW_CONFIG                 0x00000090 /* WoW Configuration */
++
++/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
++#define DSETID_INI_DATA                   0x00000100
++/* Reserved for WHAL INI Tables: 0x100..0x11f */
++#define DSETID_INI_DATA_END               0x0000011f
++
++#define DSETID_VENDOR_START               0x00010000 /* Vendor-defined DataSets */
++
++#define DSETID_INDEX_END                  0xfffffffe /* Reserved to indicate the
++                                                        end of a memory-based
++                                                        DataSet Index */
++#define DSETID_INDEX_FREE                 0xffffffff /* An unused index entry */
++
++/*
++ * PATCH DataSet format:
++ * A list of patches, terminated by a patch with
++ * address=PATCH_END.
++ *
++ * This allows for patches to be stored in flash.
++ */
++struct patch_s {
++    A_UINT32 *address;
++    A_UINT32  data;
++};
++
++/*
++ * Skip some patches.  Can be used to erase a single patch in a
++ * patch DataSet without having to re-write the DataSet.  May
++ * also be used to embed information for use by subsequent
++ * patch code.  The "data" in a PATCH_SKIP tells how many
++ * bytes of length "patch_s" to skip.
++ */
++#define PATCH_SKIP      ((A_UINT32 *)0x00000000)
++
++/*
++ * Execute code at the address specified by "data".
++ * The address of the patch structure is passed as
++ * the one parameter.
++ */
++#define PATCH_CODE_ABS  ((A_UINT32 *)0x00000001)
++
++/*
++ * Same as PATCH_CODE_ABS, but treat "data" as an
++ * offset from the start of the patch word.
++ */
++#define PATCH_CODE_REL  ((A_UINT32 *)0x00000002)
++
++/* Mark the end of this patch DataSet. */
++#define PATCH_END       ((A_UINT32 *)0xffffffff)
++
++/*
++ * A DataSet which contains a Binary Patch to some other DataSet
++ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
++ * Such a BPatch DataSet consists of BPatch metadata followed by
++ * the bdiff bytes.  BPatch metadata consists of a single 32-bit
++ * word that contains the size of the BPatched final image.
++ *
++ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
++ * to create "diffs":
++ *  bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
++ * Then add BPatch metadata to the start of "diffs".
++ *
++ * NB: There are some implementation-induced restrictions
++ * on which DataSets can be BPatched.
++ */
++#define DSETID_BPATCH_FLAG                0x80000000
++
++#endif /* __DSETID_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/dset_internal.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dset_internal.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/dset_internal.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/dset_internal.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,39 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __DSET_INTERNAL_H__
++#define __DSET_INTERNAL_H__
++
++/*
++ * Internal dset definitions, common for DataSet layer.
++ */
++
++#define DSET_TYPE_STANDARD      0
++#define DSET_TYPE_BPATCHED      1
++#define DSET_TYPE_COMPRESSED    2
++
++/* Dataset descriptor */
++
++typedef struct dset_descriptor_s {
++  struct dset_descriptor_s  *next;         /* List link. NULL only at the last
++                                              descriptor */
++  A_UINT16                   id;           /* Dset ID */
++  A_UINT16                   size;         /* Dset size. */
++  void                      *DataPtr;      /* Pointer to raw data for standard
++                                              DataSet or pointer to original
++                                              dset_descriptor for patched
++                                              DataSet */
++  A_UINT32                   data_type;    /* DSET_TYPE_*, above */
++
++  void                      *AuxPtr;       /* Additional data that might
++                                              needed for data_type. For
++                                              example, pointer to patch
++                                              Dataset descriptor for BPatch. */
++} dset_descriptor_t;
++
++#endif /* __DSET_INTERNAL_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/gpio_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/gpio_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/gpio_api.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/gpio_api.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,57 @@
++#ifndef _GPIO_API_H_
++#define _GPIO_API_H_
++/*
++ * Copyright 2005 Atheros Communications, Inc.,  All Rights Reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++/*
++ * Host-side General Purpose I/O API.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $
++ */
++
++/*
++ * Send a command to the Target in order to change output on GPIO pins.
++ */
++A_STATUS wmi_gpio_output_set(struct wmi_t *wmip,
++                             A_UINT32 set_mask,
++                             A_UINT32 clear_mask,
++                             A_UINT32 enable_mask,
++                             A_UINT32 disable_mask);
++
++/*
++ * Send a command to the Target requesting input state of GPIO pins.
++ */
++A_STATUS wmi_gpio_input_get(struct wmi_t *wmip);
++
++/*
++ * Send a command to the Target to change the value of a GPIO register.
++ */
++A_STATUS wmi_gpio_register_set(struct wmi_t *wmip,
++                               A_UINT32 gpioreg_id,
++                               A_UINT32 value);
++
++/*
++ * Send a command to the Target to fetch the value of a GPIO register.
++ */
++A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id);
++
++/*
++ * Send a command to the Target, acknowledging some GPIO interrupts.
++ */
++A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask);
++
++#endif /* _GPIO_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/gpio.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/gpio.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/gpio.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/gpio.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,34 @@
++/*
++ * Copyright (c) 2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#if defined(AR6001)
++#define GPIO_PIN_COUNT 18
++#else
++#define GPIO_PIN_COUNT 18
++#endif
++
++/*
++ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
++ * NB: These match hardware order, so that addresses can
++ * easily be computed.
++ */
++#define GPIO_ID_OUT             0x00000000
++#define GPIO_ID_OUT_W1TS        0x00000001
++#define GPIO_ID_OUT_W1TC        0x00000002
++#define GPIO_ID_ENABLE          0x00000003
++#define GPIO_ID_ENABLE_W1TS     0x00000004
++#define GPIO_ID_ENABLE_W1TC     0x00000005
++#define GPIO_ID_IN              0x00000006
++#define GPIO_ID_STATUS          0x00000007
++#define GPIO_ID_STATUS_W1TS     0x00000008
++#define GPIO_ID_STATUS_W1TC     0x00000009
++#define GPIO_ID_PIN0            0x0000000a
++#define GPIO_ID_PIN(n)          (GPIO_ID_PIN0+(n))
++
++#define GPIO_LAST_REGISTER_ID   GPIO_ID_PIN(17)
++#define GPIO_ID_NONE            0xffffffff
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/hif.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/hif.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/hif.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/hif.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,296 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ * HIF specific declarations and prototypes
++ */
++
++#ifndef _HIF_H_
++#define _HIF_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* Header files */
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++
++typedef struct htc_callbacks HTC_CALLBACKS;
++typedef struct hif_device HIF_DEVICE;
++
++/*
++ * direction - Direction of transfer (HIF_READ/HIF_WRITE).
++ */
++#define HIF_READ                    0x00000001
++#define HIF_WRITE                   0x00000002
++#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
++
++/*
++ *     type - An interface may support different kind of read/write commands.
++ *            The command type is divided into a basic and an extended command
++ *            and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO.
++ */
++#define HIF_BASIC_IO                0x00000004
++#define HIF_EXTENDED_IO             0x00000008
++#define HIF_TYPE_MASK               (HIF_BASIC_IO | HIF_EXTENDED_IO)
++
++/*
++ *     emode - This indicates the whether the command is to be executed in a
++ *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
++ *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
++ *             implemented using the asynchronous mode allowing the the bus
++ *             driver to indicate the completion of operation through the
++ *             registered callback routine. The requirement primarily comes
++ *             from the contexts these operations get called from (a driver's
++ *             transmit context or the ISR context in case of receive).
++ *             Support for both of these modes is essential.
++ */
++#define HIF_SYNCHRONOUS             0x00000010
++#define HIF_ASYNCHRONOUS            0x00000020
++#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
++
++/*
++ *     dmode - An interface may support different kinds of commands based on
++ *             the tradeoff between the amount of data it can carry and the
++ *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
++ *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
++ *             to the nearest block size by padding. The size of the block is
++ *             configurable at compile time using the HIF_BLOCK_SIZE and is
++ *             negotiated with the target during initialization after the
++ *             dragon interrupts are enabled.
++ */
++#define HIF_BYTE_BASIS              0x00000040
++#define HIF_BLOCK_BASIS             0x00000080
++#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
++
++/*
++ *     amode - This indicates if the address has to be incremented on dragon
++ *             after every read/write operation (HIF?FIXED_ADDRESS/
++ *             HIF_INCREMENTAL_ADDRESS).
++ */
++#define HIF_FIXED_ADDRESS           0x00000100
++#define HIF_INCREMENTAL_ADDRESS     0x00000200
++#define HIF_AMODE_MASK              (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
++
++#define HIF_WR_ASYNC_BYTE_FIX   \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_WR_ASYNC_BYTE_INC   \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_ASYNC_BLOCK_INC  \
++    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_SYNC_BYTE_FIX    \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_WR_SYNC_BYTE_INC    \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_WR_SYNC_BLOCK_INC  \
++    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BYTE_INC    \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BYTE_FIX    \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BYTE_FIX   \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BLOCK_FIX  \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
++#define HIF_RD_ASYNC_BYTE_INC   \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_ASYNC_BLOCK_INC  \
++    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++#define HIF_RD_SYNC_BLOCK_INC  \
++    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
++
++
++typedef enum {
++    HIF_DEVICE_POWER_STATE = 0,
++    HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
++    HIF_DEVICE_GET_MBOX_ADDR,
++    HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
++    HIF_DEVICE_GET_IRQ_PROC_MODE,
++    HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
++} HIF_DEVICE_CONFIG_OPCODE;
++
++/*
++ * HIF CONFIGURE definitions:
++ *
++ *   HIF_DEVICE_GET_MBOX_BLOCK_SIZE
++ *   input : none
++ *   output : array of 4 A_UINT32s
++ *   notes: block size is returned for each mailbox (4)
++ *
++ *   HIF_DEVICE_GET_MBOX_ADDR
++ *   input : none
++ *   output : array of 4 A_UINT32
++ *   notes: address is returned for each mailbox (4) in the array
++ *
++ *   HIF_DEVICE_GET_PENDING_EVENTS_FUNC
++ *   input : none
++ *   output: HIF_PENDING_EVENTS_FUNC function pointer
++ *   notes: this is optional for the HIF layer, if the request is
++ *          not handled then it indicates that the upper layer can use
++ *          the standard device methods to get pending events (IRQs, mailbox messages etc..)
++ *          otherwise it can call the function pointer to check pending events.
++ *
++ *   HIF_DEVICE_GET_IRQ_PROC_MODE
++ *   input : none
++ *   output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode)
++ *   note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF
++ *         layer can report whether IRQ processing is requires synchronous behavior or
++ *         can be processed using asynchronous bus requests (typically faster).
++ *
++ *   HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC
++ *   input :
++ *   output : HIF_MASK_UNMASK_RECV_EVENT function pointer
++ *   notes: this is optional for the HIF layer.  The HIF layer may require a special mechanism
++ *          to mask receive message events.  The upper layer can call this pointer when it needs
++ *          to mask/unmask receive events (in case it runs out of buffers).
++ *
++ *
++ */
++
++typedef enum {
++    HIF_DEVICE_IRQ_SYNC_ONLY,   /* for HIF implementations that require the DSR to process all
++                                   interrupts before returning */
++    HIF_DEVICE_IRQ_ASYNC_SYNC,  /* for HIF implementations that allow DSR to process interrupts
++                                   using ASYNC I/O (that is HIFAckInterrupt can be called at a
++                                   later time */
++} HIF_DEVICE_IRQ_PROCESSING_MODE;
++
++#define HIF_MAX_DEVICES                 1
++
++struct htc_callbacks {
++    A_UCHAR *name;
++    A_UINT32 id;
++    A_STATUS (* deviceInsertedHandler)(void *hif_handle);
++    A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status);
++    A_STATUS (* deviceSuspendHandler)(void *htc_handle);
++    A_STATUS (* deviceResumeHandler)(void *htc_handle);
++    A_STATUS (* deviceWakeupHandler)(void *htc_handle);
++    A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status);
++    A_STATUS (* dsrHandler)(void *htc_handle);
++};
++
++
++#define HIF_OTHER_EVENTS     (1 << 0)   /* other interrupts (non-Recv) are pending, host
++                                           needs to read the register table to figure out what */
++#define HIF_RECV_MSG_AVAIL   (1 << 1)   /* pending recv packet */
++
++typedef struct _HIF_PENDING_EVENTS_INFO {
++    A_UINT32 Events;
++    A_UINT32 LookAhead;
++} HIF_PENDING_EVENTS_INFO;
++
++    /* function to get pending events , some HIF modules use special mechanisms
++     * to detect packet available and other interrupts */
++typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE              *device,
++                                             HIF_PENDING_EVENTS_INFO *pEvents,
++                                             void                    *AsyncContext);
++
++#define HIF_MASK_RECV    TRUE
++#define HIF_UNMASK_RECV  FALSE
++    /* function to mask recv events */
++typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE  *device,
++                                                A_BOOL      Mask,
++                                                void        *AsyncContext);
++
++
++/*
++ * This API is used by the HTC layer to initialize the HIF layer and to
++ * register different callback routines. Support for following events has
++ * been captured - DSR, Read/Write completion, Device insertion/removal,
++ * Device suspension/resumption/wakeup. In addition to this, the API is
++ * also used to register the name and the revision of the chip. The latter
++ * can be used to verify the revision of the chip read from the device
++ * before reporting it to HTC.
++ */
++int HIFInit(HTC_CALLBACKS *callbacks);
++
++/*
++ * This API is used to provide the read/write interface over the specific bus
++ * interface.
++ * address - Starting address in the dragon's address space. For mailbox
++ *           writes, it refers to the start of the mbox boundary. It should
++ *           be ensured that the last byte falls on the mailbox's EOM. For
++ *           mailbox reads, it refers to the end of the mbox boundary.
++ * buffer - Pointer to the buffer containg the data to be transmitted or
++ *          received.
++ * length - Amount of data to be transmitted or received.
++ * request - Characterizes the attributes of the command.
++ */
++A_STATUS
++HIFReadWrite(HIF_DEVICE    *device,
++             A_UINT32       address,
++             A_UCHAR       *buffer,
++             A_UINT32       length,
++             A_UINT32       request,
++             void          *context);
++
++/*
++ * This can be initiated from the unload driver context ie when the HTCShutdown
++ * routine is called.
++ */
++void HIFShutDownDevice(HIF_DEVICE *device);
++
++/*
++ * This should translate to an acknowledgment to the bus driver indicating that
++ * the previous interrupt request has been serviced and the all the relevant
++ * sources have been cleared. HTC is ready to process more interrupts.
++ * This should prevent the bus driver from raising an interrupt unless the
++ * previous one has been serviced and acknowledged using the previous API.
++ */
++void HIFAckInterrupt(HIF_DEVICE *device);
++
++void HIFMaskInterrupt(HIF_DEVICE *device);
++
++void HIFUnMaskInterrupt(HIF_DEVICE *device);
++
++/*
++ * This set of functions are to be used by the bus driver to notify
++ * the HIF module about various events.
++ * These are not implemented if the bus driver provides an alternative
++ * way for this notification though callbacks for instance.
++ */
++int HIFInsertEventNotify(void);
++
++int HIFRemoveEventNotify(void);
++
++int HIFIRQEventNotify(void);
++
++int HIFRWCompleteEventNotify(void);
++
++/*
++ * This function associates a opaque handle with the HIF layer
++ * to be used in communication with upper layer i.e. HTC.
++ * This would normaly be a pointer to htc_target data structure.
++ */
++void HIFSetHandle(void *hif_handle, void *handle);
++
++A_STATUS
++HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
++                   void *config, A_UINT32 configLen);
++
++
++struct device;
++struct device*
++HIFGetOSDevice(HIF_DEVICE *device);
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HIF_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/host_version.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/host_version.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/host_version.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/host_version.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,49 @@
++#ifndef _HOST_VERSION_H_
++#define _HOST_VERSION_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains version information for the sample host driver for the
++ * AR6000 chip
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include <AR6K_version.h>
++
++/*
++ * The version number is made up of major, minor, patch and build
++ * numbers. These are 16 bit numbers.  The build and release script will
++ * set the build number using a Perforce counter.  Here the build number is
++ * set to 9999 so that builds done without the build-release script are easily
++ * identifiable.
++ */
++
++#define ATH_SW_VER_MAJOR      __VER_MAJOR_
++#define ATH_SW_VER_MINOR      __VER_MINOR_
++#define ATH_SW_VER_PATCH      __VER_PATCH_
++#define ATH_SW_VER_BUILD 9999
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HOST_VERSION_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_api.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_api.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,439 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef _HTC_API_H_
++#define _HTC_API_H_
++
++#include <htc.h>
++#include <htc_services.h>
++#include "htc_packet.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif /* __cplusplus */
++
++/* TODO.. for BMI */
++#define ENDPOINT1 0
++// TODO -remove me, but we have to fix BMI first
++#define HTC_MAILBOX_NUM_MAX    4
++
++
++/* ------ Endpoint IDS ------ */
++typedef enum
++{
++    ENDPOINT_UNUSED = -1,
++    ENDPOINT_0 = 0,
++    ENDPOINT_1 = 1,
++    ENDPOINT_2 = 2,
++    ENDPOINT_3,
++    ENDPOINT_4,
++    ENDPOINT_5,
++    ENDPOINT_6,
++    ENDPOINT_7,
++    ENDPOINT_8,
++    ENDPOINT_MAX,
++} HTC_ENDPOINT_ID;
++
++/* this is the amount of header room required by users of HTC */
++#define HTC_HEADER_LEN         HTC_HDR_LENGTH
++
++typedef void *HTC_HANDLE;
++
++typedef A_UINT16 HTC_SERVICE_ID;
++
++typedef struct _HTC_INIT_INFO {
++    void   (*AddInstance)(HTC_HANDLE);
++    void   (*DeleteInstance)(void *Instance);
++    void   (*TargetFailure)(void *Instance, A_STATUS Status);
++} HTC_INIT_INFO;
++
++/* per service connection send completion */
++typedef void   (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *);
++/* per service connection pkt received */
++typedef void   (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *);
++
++/* Optional per service connection receive buffer re-fill callback,
++ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
++ * to the network stack.  The driver never gets the packets back from the OS.  For these OSes
++ * a refill callback can be used to allocate and re-queue buffers into HTC.
++ *
++ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and
++ * the driver can re-queue these buffers into HTC. In this regard a refill callback is
++ * unnecessary */
++typedef void   (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint);
++
++/* Optional per service connection callback when a send queue is full. This can occur if the
++ * host continues queueing up TX packets faster than credits can arrive
++ * To prevent the host (on some Oses like Linux) from continuously queueing packets
++ * and consuming resources, this callback is provided so that that the host
++ * can disable TX in the subsystem (i.e. network stack)
++ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this
++ * closed loop mechanism will prevent the network stack from overunning the NIC */
++typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint);
++/* Optional per service connection callback when a send queue is available for receive new packet. */
++typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint);
++
++typedef struct _HTC_EP_CALLBACKS {
++    void                     *pContext;     /* context for each callback */
++    HTC_EP_SEND_PKT_COMPLETE EpTxComplete;  /* tx completion callback for connected endpoint */
++    HTC_EP_RECV_PKT          EpRecv;        /* receive callback for connected endpoint */
++    HTC_EP_RECV_REFILL       EpRecvRefill;  /* OPTIONAL receive re-fill callback for connected endpoint */
++    HTC_EP_SEND_QUEUE_FULL   EpSendFull;    /* OPTIONAL send full callback */
++    HTC_EP_SEND_QUEUE_AVAIL  EpSendAvail;    /* OPTIONAL send available callback */
++} HTC_EP_CALLBACKS;
++
++/* service connection information */
++typedef struct _HTC_SERVICE_CONNECT_REQ {
++    HTC_SERVICE_ID   ServiceID;                 /* service ID to connect to */
++    A_UINT16         ConnectionFlags;           /* connection flags, see htc protocol definition */
++    A_UINT8         *pMetaData;                 /* ptr to optional service-specific meta-data */
++    A_UINT8          MetaDataLength;            /* optional meta data length */
++    HTC_EP_CALLBACKS EpCallbacks;               /* endpoint callbacks */
++    int              MaxSendQueueDepth;         /* maximum depth of any send queue */
++} HTC_SERVICE_CONNECT_REQ;
++
++/* service connection response information */
++typedef struct _HTC_SERVICE_CONNECT_RESP {
++    A_UINT8     *pMetaData;             /* caller supplied buffer to optional meta-data */
++    A_UINT8     BufferLength;           /* length of caller supplied buffer */
++    A_UINT8     ActualLength;           /* actual length of meta data */
++    HTC_ENDPOINT_ID Endpoint;           /* endpoint to communicate over */
++    int         MaxMsgLength;           /* max length of all messages over this endpoint */
++    A_UINT8     ConnectRespCode;        /* connect response code from target */
++} HTC_SERVICE_CONNECT_RESP;
++
++/* endpoint distribution structure */
++typedef struct _HTC_ENDPOINT_CREDIT_DIST {
++    struct _HTC_ENDPOINT_CREDIT_DIST *pNext;
++    struct _HTC_ENDPOINT_CREDIT_DIST *pPrev;
++    HTC_SERVICE_ID      ServiceID;          /* Service ID (set by HTC) */
++    HTC_ENDPOINT_ID     Endpoint;           /* endpoint for this distribution struct (set by HTC) */
++    A_UINT32            DistFlags;          /* distribution flags, distribution function can
++                                               set default activity using SET_EP_ACTIVE() macro */
++    int                 TxCreditsNorm;      /* credits for normal operation, anything above this
++                                               indicates the endpoint is over-subscribed, this field
++                                               is only relevant to the credit distribution function */
++    int                 TxCreditsMin;       /* floor for credit distribution, this field is
++                                               only relevant to the credit distribution function */
++    int                 TxCreditsAssigned;  /* number of credits assigned to this EP, this field
++                                               is only relevant to the credit dist function */
++    int                 TxCredits;          /* current credits available, this field is used by
++                                               HTC to determine whether a message can be sent or
++                                               must be queued */
++    int                 TxCreditsToDist;    /* pending credits to distribute on this endpoint, this
++                                               is set by HTC when credit reports arrive.
++                                               The credit distribution functions sets this to zero
++                                               when it distributes the credits */
++    int                 TxCreditsSeek;      /* this is the number of credits that the current pending TX
++                                               packet needs to transmit.  This is set by HTC when
++                                               and endpoint needs credits in order to transmit */
++    int                 TxCreditSize;       /* size in bytes of each credit (set by HTC) */
++    int                 TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */
++    void                *pHTCReserved;      /* reserved for HTC use */
++} HTC_ENDPOINT_CREDIT_DIST;
++
++#define HTC_EP_ACTIVE                            (1 << 31)
++
++/* macro to check if an endpoint has gone active, useful for credit
++ * distributions */
++#define IS_EP_ACTIVE(epDist)  ((epDist)->DistFlags & HTC_EP_ACTIVE)
++#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE
++
++    /* credit distibution code that is passed into the distrbution function,
++     * there are mandatory and optional codes that must be handled */
++typedef enum _HTC_CREDIT_DIST_REASON {
++    HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
++                                              send operations (MANDATORY) resulting in credit reports */
++    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
++    HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
++    HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
++                                              the distribution function */
++} HTC_CREDIT_DIST_REASON;
++
++typedef void (*HTC_CREDIT_DIST_CALLBACK)(void                     *Context,
++                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                         HTC_CREDIT_DIST_REASON   Reason);
++
++typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context,
++                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                                         int                      TotalCredits);
++
++    /* endpoint statistics action */
++typedef enum _HTC_ENDPOINT_STAT_ACTION {
++    HTC_EP_STAT_SAMPLE = 0,                /* only read statistics */
++    HTC_EP_STAT_SAMPLE_AND_CLEAR = 1,      /* sample and immediately clear statistics */
++    HTC_EP_STAT_CLEAR                      /* clear only */
++} HTC_ENDPOINT_STAT_ACTION;
++
++    /* endpoint statistics */
++typedef struct _HTC_ENDPOINT_STATS {
++    A_UINT32  TxCreditLowIndications;  /* number of times the host set the credit-low flag in a send message on
++                                        this endpoint */
++    A_UINT32  TxIssued;               /* running count of TX packets issued */
++    A_UINT32  TxCreditRpts;           /* running count of total credit reports received for this endpoint */
++    A_UINT32  TxCreditRptsFromRx;
++    A_UINT32  TxCreditRptsFromOther;
++    A_UINT32  TxCreditRptsFromEp0;
++    A_UINT32  TxCreditsFromRx;        /* count of credits received via Rx packets on this endpoint */
++    A_UINT32  TxCreditsFromOther;     /* count of credits received via another endpoint */
++    A_UINT32  TxCreditsFromEp0;       /* count of credits received via another endpoint */
++    A_UINT32  TxCreditsConsummed;     /* count of consummed credits */
++    A_UINT32  TxCreditsReturned;      /* count of credits returned */
++    A_UINT32  RxReceived;             /* count of RX packets received */
++    A_UINT32  RxLookAheads;           /* count of lookahead records
++                                         found in messages received on this endpoint */
++} HTC_ENDPOINT_STATS;
++
++/* ------ Function Prototypes ------ */
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Initialize HTC
++  @function name: HTCInit
++  @input:  pInfo - initialization information
++  @output:
++  @return: A_OK on success
++  @notes: The caller initializes global HTC state and registers various instance
++          notification callbacks (see HTC_INIT_INFO).
++
++  @example:
++  @see also: HTCShutdown
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCInit(HTC_INIT_INFO *pInfo);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Get the underlying HIF device handle
++  @function name: HTCGetHifDevice
++  @input:  HTCHandle - handle passed into the AddInstance callback
++  @output:
++  @return: opaque HIF device handle usable in HIF API calls.
++  @notes:
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void       *HTCGetHifDevice(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Set the associated instance for the HTC handle
++  @function name: HTCSetInstance
++  @input:  HTCHandle - handle passed into the AddInstance callback
++           Instance - caller supplied instance object
++  @output:
++  @return:
++  @notes:  Caller must set the instance information for the HTC handle in order to receive
++           notifications for instance deletion (DeleteInstance callback is called) and for target
++           failure notification.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Set credit distribution parameters
++  @function name: HTCSetCreditDistribution
++  @input:  HTCHandle - HTC handle
++           pCreditDistCont - caller supplied context to pass into distribution functions
++           CreditDistFunc - Distribution function callback
++           CreditDistInit - Credit Distribution initialization callback
++           ServicePriorityOrder - Array containing list of service IDs, lowest index is highest
++                                  priority
++           ListLength - number of elements in ServicePriorityOrder
++  @output:
++  @return:
++  @notes:  The user can set a custom credit distribution function to handle special requirements
++           for each endpoint.  A default credit distribution routine can be used by setting
++           CreditInitFunc to NULL.  The default credit distribution is only provided for simple
++           "fair" credit distribution without regard to any prioritization.
++
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
++                                     void                     *pCreditDistContext,
++                                     HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
++                                     HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
++                                     HTC_SERVICE_ID           ServicePriorityOrder[],
++                                     int                      ListLength);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Wait for the target to indicate the HTC layer is ready
++  @function name: HTCWaitTarget
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes:  This API blocks until the target responds with an HTC ready message.
++           The caller should not connect services until the target has indicated it is
++           ready.
++  @example:
++  @see also: HTCConnectService
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCWaitTarget(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Start target service communications
++  @function name: HTCStart
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes: This API indicates to the target that the service connection phase is complete
++          and the target can freely start all connected services.  This API should only be
++          called AFTER all service connections have been made.  TCStart will issue a
++          SETUP_COMPLETE message to the target to indicate that all service connections
++          have been made and the target can start communicating over the endpoints.
++  @example:
++  @see also: HTCConnectService
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCStart(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Add receive packet to HTC
++  @function name: HTCAddReceivePkt
++  @input:  HTCHandle - HTC handle
++           pPacket - HTC receive packet to add
++  @output:
++  @return: A_OK on success
++  @notes:  user must supply HTC packets for capturing incomming HTC frames.  The caller
++           must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
++           macro.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Connect to an HTC service
++  @function name: HTCConnectService
++  @input:  HTCHandle - HTC handle
++           pReq - connection details
++  @output: pResp - connection response
++  @return:
++  @notes:  Service connections must be performed before HTCStart.  User provides callback handlers
++           for various endpoint events.
++  @example:
++  @see also: HTCStart
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCConnectService(HTC_HANDLE HTCHandle,
++                              HTC_SERVICE_CONNECT_REQ  *pReq,
++                              HTC_SERVICE_CONNECT_RESP *pResp);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Send an HTC packet
++  @function name: HTCSendPkt
++  @input:  HTCHandle - HTC handle
++           pPacket - packet to send
++  @output:
++  @return: A_OK
++  @notes:  Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro.
++           This interface is fully asynchronous.  On error, HTC SendPkt will
++           call the registered Endpoint callback to cleanup the packet.
++  @example:
++  @see also: HTCFlushEndpoint
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_STATUS    HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Stop HTC service communications
++  @function name: HTCStop
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes: HTC communications is halted.  All receive and pending TX packets will
++          be flushed.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCStop(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Shutdown HTC
++  @function name: HTCShutdown
++  @input:
++  @output:
++  @return:
++  @notes:  This cleans up all resources allocated by HTCInit().
++  @example:
++  @see also: HTCInit
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCShutDown(void);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Flush pending TX packets
++  @function name: HTCFlushEndpoint
++  @input:  HTCHandle - HTC handle
++           Endpoint - Endpoint to flush
++           Tag - flush tag
++  @output:
++  @return:
++  @notes:  The Tag parameter is used to selectively flush packets with matching tags.
++           The value of 0 forces all packets to be flush regardless of tag.
++  @example:
++  @see also: HTCSendPkt
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Dump credit distribution state
++  @function name: HTCDumpCreditStates
++  @input:  HTCHandle - HTC handle
++  @output:
++  @return:
++  @notes:  This dumps all credit distribution information to the debugger
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCDumpCreditStates(HTC_HANDLE HTCHandle);
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Indicate a traffic activity change on an endpoint
++  @function name: HTCIndicateActivityChange
++  @input:  HTCHandle - HTC handle
++           Endpoint - endpoint in which activity has changed
++           Active - TRUE if active, FALSE if it has become inactive
++  @output:
++  @return:
++  @notes:  This triggers the registered credit distribution function to
++           re-adjust credits for active/inactive endpoints.
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++void        HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
++                                      HTC_ENDPOINT_ID Endpoint,
++                                      A_BOOL          Active);
++
++/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  @desc: Get endpoint statistics
++  @function name: HTCGetEndpointStatistics
++  @input:  HTCHandle - HTC handle
++           Endpoint - Endpoint identifier
++           Action - action to take with statistics
++  @output:
++           pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR)
++
++  @return: TRUE if statistics profiling is enabled, otherwise FALSE.
++
++  @notes:  Statistics is a compile-time option and this function may return FALSE
++           if HTC is not compiled with profiling.
++
++           The caller can specify the statistic "action" to take when sampling
++           the statistics.  This includes:
++
++           HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values.
++           HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics
++                             are cleared.
++           HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for
++                   pStats
++
++  @example:
++  @see also:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
++A_BOOL       HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
++                                      HTC_ENDPOINT_ID          Endpoint,
++                                      HTC_ENDPOINT_STAT_ACTION Action,
++                                      HTC_ENDPOINT_STATS       *pStats);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HTC_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,190 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++
++#ifndef __HTC_H__
++#define __HTC_H__
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field))
++
++#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \
++        (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)]))
++
++/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a
++ * structure using only the type and field name.
++ * Use these macros if there is the potential for unaligned buffer accesses. */
++#define A_GET_UINT16_FIELD(p,type,field) \
++    ASSEMBLE_UNALIGNED_UINT16(p,\
++                              A_OFFSETOF(type,field) + 1, \
++                              A_OFFSETOF(type,field))
++
++#define A_SET_UINT16_FIELD(p,type,field,value) \
++{                                              \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value);        \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \
++}
++
++#define A_GET_UINT8_FIELD(p,type,field) \
++            ((A_UINT8 *)(p))[A_OFFSETOF(type,field)]
++
++#define A_SET_UINT8_FIELD(p,type,field,value) \
++    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value)
++
++/****** DANGER DANGER ***************
++ *
++ *   The frame header length and message formats defined herein were
++ *   selected to accommodate optimal alignment for target processing.  This reduces code
++ *   size and improves performance.
++ *
++ *   Any changes to the header length may alter the alignment and cause exceptions
++ *   on the target. When adding to the message structures insure that fields are
++ *   properly aligned.
++ *
++ */
++
++/* HTC frame header */
++typedef PREPACK struct _HTC_FRAME_HDR{
++        /* do not remove or re-arrange these fields, these are minimally required
++         * to take advantage of 4-byte lookaheads in some hardware implementations */
++    A_UINT8   EndpointID;
++    A_UINT8   Flags;
++    A_UINT16  PayloadLen;       /* length of data (including trailer) that follows the header */
++
++    /***** end of 4-byte lookahead ****/
++
++    A_UINT8   ControlBytes[2];
++
++    /* message payload starts after the header */
++
++} POSTPACK HTC_FRAME_HDR;
++
++/* frame header flags */
++#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0)
++#define HTC_FLAGS_RECV_TRAILER       (1 << 1)
++
++
++#define HTC_HDR_LENGTH  (sizeof(HTC_FRAME_HDR))
++#define HTC_MAX_TRAILER_LENGTH   255
++#define HTC_MAX_PAYLOAD_LENGTH   (2048 - sizeof(HTC_FRAME_HDR))
++
++/* HTC control message IDs */
++typedef enum {
++    HTC_MSG_READY_ID = 1,
++    HTC_MSG_CONNECT_SERVICE_ID = 2,
++    HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3,
++    HTC_MSG_SETUP_COMPLETE_ID = 4,
++} HTC_MSG_IDS;
++
++#define HTC_MAX_CONTROL_MESSAGE_LENGTH  256
++
++/* base message ID header */
++typedef PREPACK struct {
++    A_UINT16 MessageID;
++} POSTPACK HTC_UNKNOWN_MSG;
++
++/* HTC ready message
++ * direction : target-to-host  */
++typedef PREPACK struct {
++    A_UINT16  MessageID;    /* ID */
++    A_UINT16  CreditCount;  /* number of credits the target can offer */
++    A_UINT16  CreditSize;   /* size of each credit */
++    A_UINT8   MaxEndpoints; /* maximum number of endpoints the target has resources for */
++    A_UINT8   _Pad1;
++} POSTPACK HTC_READY_MSG;
++
++#define HTC_SERVICE_META_DATA_MAX_LENGTH 128
++
++/* connect service
++ * direction : host-to-target */
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    A_UINT16  ServiceID;           /* service ID of the service to connect to */
++    A_UINT16  ConnectionFlags;     /* connection flags */
++
++#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2)  /* reduce credit dribbling when
++                                                             the host needs credits */
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK             (0x3)
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH        0x0
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF          0x1
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS     0x2
++#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY             0x3
++
++    A_UINT8   ServiceMetaLength;   /* length of meta data that follows */
++    A_UINT8   _Pad1;
++
++    /* service-specific meta data starts after the header */
++
++} POSTPACK HTC_CONNECT_SERVICE_MSG;
++
++/* connect response
++ * direction : target-to-host */
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    A_UINT16  ServiceID;            /* service ID that the connection request was made */
++    A_UINT8   Status;               /* service connection status */
++    A_UINT8   EndpointID;           /* assigned endpoint ID */
++    A_UINT16  MaxMsgSize;           /* maximum expected message size on this endpoint */
++    A_UINT8   ServiceMetaLength;    /* length of meta data that follows */
++    A_UINT8   _Pad1;
++
++    /* service-specific meta data starts after the header */
++
++} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG;
++
++typedef PREPACK struct {
++    A_UINT16  MessageID;
++    /* currently, no other fields */
++} POSTPACK HTC_SETUP_COMPLETE_MSG;
++
++
++/* connect response status codes */
++#define HTC_SERVICE_SUCCESS      0  /* success */
++#define HTC_SERVICE_NOT_FOUND    1  /* service could not be found */
++#define HTC_SERVICE_FAILED       2  /* specific service failed the connect */
++#define HTC_SERVICE_NO_RESOURCES 3  /* no resources (i.e. no more endpoints) */
++#define HTC_SERVICE_NO_MORE_EP   4  /* specific service is not allowing any more
++                                       endpoints */
++
++/* report record IDs */
++typedef enum {
++    HTC_RECORD_NULL  = 0,
++    HTC_RECORD_CREDITS   = 1,
++    HTC_RECORD_LOOKAHEAD = 2,
++} HTC_RPT_IDS;
++
++typedef PREPACK struct {
++    A_UINT8 RecordID;     /* Record ID */
++    A_UINT8 Length;       /* Length of record */
++} POSTPACK HTC_RECORD_HDR;
++
++typedef PREPACK struct {
++    A_UINT8 EndpointID;     /* Endpoint that owns these credits */
++    A_UINT8 Credits;        /* credits to report since last report */
++} POSTPACK HTC_CREDIT_REPORT;
++
++typedef PREPACK struct {
++    A_UINT8 PreValid;         /* pre valid guard */
++    A_UINT8 LookAhead[4];     /* 4 byte lookahead */
++    A_UINT8 PostValid;        /* post valid guard */
++
++   /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes.
++    * The PreValid bytes must equal the inverse of the PostValid byte */
++
++} POSTPACK HTC_LOOKAHEAD_REPORT;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++
++#endif /* __HTC_H__ */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_packet.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_packet.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_packet.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_packet.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,138 @@
++/*
++ *
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifndef HTC_PACKET_H_
++#define HTC_PACKET_H_
++
++
++#include "dl_list.h"
++
++struct _HTC_PACKET;
++
++typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *);
++
++typedef A_UINT16 HTC_TX_TAG;
++
++typedef struct _HTC_TX_PACKET_INFO {
++    HTC_TX_TAG    Tag;            /* tag used to selective flush packets */
++} HTC_TX_PACKET_INFO;
++
++#define HTC_TX_PACKET_TAG_ALL          0    /* a tag of zero is reserved and used to flush ALL packets */
++#define HTC_TX_PACKET_TAG_INTERNAL     1                                /* internal tags start here */
++#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */
++
++typedef struct _HTC_RX_PACKET_INFO {
++    A_UINT32    Unused;          /* for future use and to make compilers happy */
++} HTC_RX_PACKET_INFO;
++
++/* wrapper around endpoint-specific packets */
++typedef struct _HTC_PACKET {
++    DL_LIST         ListLink;       /* double link */
++    void            *pPktContext;   /* caller's per packet specific context */
++
++    A_UINT8         *pBufferStart;  /* the true buffer start , the caller can
++                                       store the real buffer start here.  In
++                                       receive callbacks, the HTC layer sets pBuffer
++                                       to the start of the payload past the header. This
++                                       field allows the caller to reset pBuffer when it
++                                       recycles receive packets back to HTC */
++    /*
++     * Pointer to the start of the buffer. In the transmit
++     * direction this points to the start of the payload. In the
++     * receive direction, however, the buffer when queued up
++     * points to the start of the HTC header but when returned
++     * to the caller points to the start of the payload
++     */
++    A_UINT8         *pBuffer;       /* payload start (RX/TX) */
++    A_UINT32        BufferLength;   /* length of buffer */
++    A_UINT32        ActualLength;   /* actual length of payload */
++    int             Endpoint;       /* endpoint that this packet was sent/recv'd from */
++    A_STATUS        Status;         /* completion status */
++    union {
++        HTC_TX_PACKET_INFO  AsTx;   /* Tx Packet specific info */
++        HTC_RX_PACKET_INFO  AsRx;   /* Rx Packet specific info */
++    } PktInfo;
++
++    /* the following fields are for internal HTC use */
++    HTC_PACKET_COMPLETION Completion;   /* completion */
++    void                  *pContext;    /* HTC private completion context */
++    A_UINT32              HTCReserved;  /* reserved */
++} HTC_PACKET;
++
++
++
++#define COMPLETE_HTC_PACKET(p,status)        \
++{                                            \
++    (p)->Status = (status);                  \
++    (p)->Completion((p)->pContext,(p));      \
++}
++
++#define INIT_HTC_PACKET_INFO(p,b,len)             \
++{                                                 \
++    (p)->pBufferStart = (b);                      \
++    (p)->BufferLength = (len);                    \
++}
++
++/* macro to set an initial RX packet for refilling HTC */
++#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \
++{                                                 \
++    (p)->pPktContext = (c);                       \
++    (p)->pBuffer = (b);                           \
++    (p)->pBufferStart = (b);                      \
++    (p)->BufferLength = (len);                    \
++    (p)->Endpoint = (ep);                         \
++}
++
++/* fast macro to recycle an RX packet that will be re-queued to HTC */
++#define HTC_PACKET_RESET_RX(p)              \
++    (p)->pBuffer = (p)->pBufferStart
++
++/* macro to set packet parameters for TX */
++#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag)  \
++{                                                 \
++    (p)->pPktContext = (c);                       \
++    (p)->pBuffer = (b);                           \
++    (p)->ActualLength = (len);                    \
++    (p)->Endpoint = (ep);                         \
++    (p)->PktInfo.AsTx.Tag = (tag);                \
++}
++
++/* HTC Packet Queueing Macros */
++typedef DL_LIST HTC_PACKET_QUEUE;
++/* initialize queue */
++#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ))
++/* enqueue HTC packet to the tail of the queue */
++#define HTC_PACKET_ENQUEUE(pQ,p)  DL_ListInsertTail((pQ),&(p)->ListLink)
++/* test if a queue is empty */
++#define HTC_QUEUE_EMPTY(pQ)       DL_LIST_IS_EMPTY((pQ))
++/* get packet at head without removing it */
++#define HTC_GET_PKT_AT_HEAD(pQ)   A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink);
++/* remove a packet from the current list it is linked to */
++#define HTC_PACKET_REMOVE(p)      DL_ListRemove(&(p)->ListLink)
++
++/* dequeue an HTC packet from the head of the queue */
++static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) {
++    DL_LIST    *pItem = DL_ListRemoveItemFromHead(queue);
++    if (pItem != NULL) {
++        return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink);
++    }
++    return NULL;
++}
++
++#endif /*HTC_PACKET_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_services.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_services.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/htc_services.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/htc_services.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (c) 2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __HTC_SERVICES_H__
++#define __HTC_SERVICES_H__
++
++/* Current service IDs */
++
++typedef enum {
++    RSVD_SERVICE_GROUP  = 0,
++    WMI_SERVICE_GROUP   = 1,
++
++    HTC_TEST_GROUP = 254,
++    HTC_SERVICE_GROUP_LAST = 255
++}HTC_SERVICE_GROUP_IDS;
++
++#define MAKE_SERVICE_ID(group,index) \
++            (int)(((int)group << 8) | (int)(index))
++
++/* NOTE: service ID of 0x0000 is reserved and should never be used */
++#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1)
++#define WMI_CONTROL_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0)
++#define WMI_DATA_BE_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1)
++#define WMI_DATA_BK_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2)
++#define WMI_DATA_VI_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3)
++#define WMI_DATA_VO_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4)
++#define WMI_MAX_SERVICES  5
++
++/* raw stream service (i.e. flash, tcmd, calibration apps) */
++#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0)
++
++#endif /*HTC_SERVICES_H_*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,342 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2006 Atheros Communications, Inc.
++ *
++ * Wireless Network driver for Atheros AR6001
++ * All rights reserved.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ */
++#ifndef _NET80211_IEEE80211_H_
++#define _NET80211_IEEE80211_H_
++
++#include "athstartpack.h"
++
++/*
++ * 802.11 protocol definitions.
++ */
++
++#define IEEE80211_ADDR_LEN  6       /* size of 802.11 address */
++/* is 802.11 address multicast/broadcast? */
++#define IEEE80211_IS_MULTICAST(_a)  (*(_a) & 0x01)
++#define IEEE80211_ADDR_EQ(addr1, addr2)     \
++    (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0)
++
++#define IEEE80211_KEYBUF_SIZE 16
++#define IEEE80211_MICBUF_SIZE (8+8)  /* space for both tx and rx */
++
++/*
++ * NB: these values are ordered carefully; there are lots of
++ * of implications in any reordering.  In particular beware
++ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
++ */
++#define IEEE80211_CIPHER_WEP            0
++#define IEEE80211_CIPHER_TKIP           1
++#define IEEE80211_CIPHER_AES_OCB        2
++#define IEEE80211_CIPHER_AES_CCM        3
++#define IEEE80211_CIPHER_CKIP           5
++#define IEEE80211_CIPHER_CCKM_KRK       6
++#define IEEE80211_CIPHER_NONE           7       /* pseudo value */
++
++#define IEEE80211_CIPHER_MAX            (IEEE80211_CIPHER_NONE+1)
++
++#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \
++        (((len) == 5) || ((len) == 13) || ((len) == 16))
++
++
++
++/*
++ * generic definitions for IEEE 802.11 frames
++ */
++PREPACK struct ieee80211_frame {
++    A_UINT8    i_fc[2];
++    A_UINT8    i_dur[2];
++    A_UINT8    i_addr1[IEEE80211_ADDR_LEN];
++    A_UINT8    i_addr2[IEEE80211_ADDR_LEN];
++    A_UINT8    i_addr3[IEEE80211_ADDR_LEN];
++    A_UINT8    i_seq[2];
++    /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
++    /* see below */
++} POSTPACK;
++
++#define IEEE80211_FC0_VERSION_MASK          0x03
++#define IEEE80211_FC0_VERSION_SHIFT         0
++#define IEEE80211_FC0_VERSION_0             0x00
++#define IEEE80211_FC0_TYPE_MASK             0x0c
++#define IEEE80211_FC0_TYPE_SHIFT            2
++#define IEEE80211_FC0_TYPE_MGT              0x00
++#define IEEE80211_FC0_TYPE_CTL              0x04
++#define IEEE80211_FC0_TYPE_DATA             0x08
++
++#define IEEE80211_FC0_SUBTYPE_MASK          0xf0
++#define IEEE80211_FC0_SUBTYPE_SHIFT         4
++/* for TYPE_MGT */
++#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ     0x00
++#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP    0x10
++#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ   0x20
++#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP  0x30
++#define IEEE80211_FC0_SUBTYPE_PROBE_REQ     0x40
++#define IEEE80211_FC0_SUBTYPE_PROBE_RESP    0x50
++#define IEEE80211_FC0_SUBTYPE_BEACON        0x80
++#define IEEE80211_FC0_SUBTYPE_ATIM          0x90
++#define IEEE80211_FC0_SUBTYPE_DISASSOC      0xa0
++#define IEEE80211_FC0_SUBTYPE_AUTH          0xb0
++#define IEEE80211_FC0_SUBTYPE_DEAUTH        0xc0
++/* for TYPE_CTL */
++#define IEEE80211_FC0_SUBTYPE_PS_POLL       0xa0
++#define IEEE80211_FC0_SUBTYPE_RTS           0xb0
++#define IEEE80211_FC0_SUBTYPE_CTS           0xc0
++#define IEEE80211_FC0_SUBTYPE_ACK           0xd0
++#define IEEE80211_FC0_SUBTYPE_CF_END        0xe0
++#define IEEE80211_FC0_SUBTYPE_CF_END_ACK    0xf0
++/* for TYPE_DATA (bit combination) */
++#define IEEE80211_FC0_SUBTYPE_DATA          0x00
++#define IEEE80211_FC0_SUBTYPE_CF_ACK        0x10
++#define IEEE80211_FC0_SUBTYPE_CF_POLL       0x20
++#define IEEE80211_FC0_SUBTYPE_CF_ACPL       0x30
++#define IEEE80211_FC0_SUBTYPE_NODATA        0x40
++#define IEEE80211_FC0_SUBTYPE_CFACK         0x50
++#define IEEE80211_FC0_SUBTYPE_CFPOLL        0x60
++#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
++#define IEEE80211_FC0_SUBTYPE_QOS           0x80
++#define IEEE80211_FC0_SUBTYPE_QOS_NULL      0xc0
++
++#define IEEE80211_FC1_DIR_MASK              0x03
++#define IEEE80211_FC1_DIR_NODS              0x00    /* STA->STA */
++#define IEEE80211_FC1_DIR_TODS              0x01    /* STA->AP  */
++#define IEEE80211_FC1_DIR_FROMDS            0x02    /* AP ->STA */
++#define IEEE80211_FC1_DIR_DSTODS            0x03    /* AP ->AP  */
++
++#define IEEE80211_FC1_MORE_FRAG             0x04
++#define IEEE80211_FC1_RETRY                 0x08
++#define IEEE80211_FC1_PWR_MGT               0x10
++#define IEEE80211_FC1_MORE_DATA             0x20
++#define IEEE80211_FC1_WEP                   0x40
++#define IEEE80211_FC1_ORDER                 0x80
++
++#define IEEE80211_SEQ_FRAG_MASK             0x000f
++#define IEEE80211_SEQ_FRAG_SHIFT            0
++#define IEEE80211_SEQ_SEQ_MASK              0xfff0
++#define IEEE80211_SEQ_SEQ_SHIFT             4
++
++#define IEEE80211_NWID_LEN                  32
++
++/*
++ * 802.11 rate set.
++ */
++#define IEEE80211_RATE_SIZE     8       /* 802.11 standard */
++#define IEEE80211_RATE_MAXSIZE  15      /* max rates we'll handle */
++
++#define WMM_NUM_AC                  4   /* 4 AC categories */
++
++#define WMM_PARAM_ACI_M         0x60    /* Mask for ACI field */
++#define WMM_PARAM_ACI_S         5   /* Shift for ACI field */
++#define WMM_PARAM_ACM_M         0x10    /* Mask for ACM bit */
++#define WMM_PARAM_ACM_S         4       /* Shift for ACM bit */
++#define WMM_PARAM_AIFSN_M       0x0f    /* Mask for aifsn field */
++#define WMM_PARAM_LOGCWMIN_M    0x0f    /* Mask for CwMin field (in log) */
++#define WMM_PARAM_LOGCWMAX_M    0xf0    /* Mask for CwMax field (in log) */
++#define WMM_PARAM_LOGCWMAX_S    4   /* Shift for CwMax field */
++
++#define WMM_AC_TO_TID(_ac) (       \
++    ((_ac) == WMM_AC_VO) ? 6 : \
++    ((_ac) == WMM_AC_VI) ? 5 : \
++    ((_ac) == WMM_AC_BK) ? 1 : \
++    0)
++
++#define TID_TO_WMM_AC(_tid) (      \
++    ((_tid) < 1) ? WMM_AC_BE : \
++    ((_tid) < 3) ? WMM_AC_BK : \
++    ((_tid) < 6) ? WMM_AC_VI : \
++    WMM_AC_VO)
++/*
++ * Management information element payloads.
++ */
++
++enum {
++    IEEE80211_ELEMID_SSID       = 0,
++    IEEE80211_ELEMID_RATES      = 1,
++    IEEE80211_ELEMID_FHPARMS    = 2,
++    IEEE80211_ELEMID_DSPARMS    = 3,
++    IEEE80211_ELEMID_CFPARMS    = 4,
++    IEEE80211_ELEMID_TIM        = 5,
++    IEEE80211_ELEMID_IBSSPARMS  = 6,
++    IEEE80211_ELEMID_COUNTRY    = 7,
++    IEEE80211_ELEMID_CHALLENGE  = 16,
++    /* 17-31 reserved for challenge text extension */
++    IEEE80211_ELEMID_PWRCNSTR   = 32,
++    IEEE80211_ELEMID_PWRCAP     = 33,
++    IEEE80211_ELEMID_TPCREQ     = 34,
++    IEEE80211_ELEMID_TPCREP     = 35,
++    IEEE80211_ELEMID_SUPPCHAN   = 36,
++    IEEE80211_ELEMID_CHANSWITCH = 37,
++    IEEE80211_ELEMID_MEASREQ    = 38,
++    IEEE80211_ELEMID_MEASREP    = 39,
++    IEEE80211_ELEMID_QUIET      = 40,
++    IEEE80211_ELEMID_IBSSDFS    = 41,
++    IEEE80211_ELEMID_ERP        = 42,
++    IEEE80211_ELEMID_RSN        = 48,
++    IEEE80211_ELEMID_XRATES     = 50,
++    IEEE80211_ELEMID_TPC        = 150,
++    IEEE80211_ELEMID_CCKM       = 156,
++    IEEE80211_ELEMID_VENDOR     = 221,  /* vendor private */
++};
++
++#define ATH_OUI             0x7f0300        /* Atheros OUI */
++#define ATH_OUI_TYPE        0x01
++#define ATH_OUI_SUBTYPE     0x01
++#define ATH_OUI_VERSION     0x00
++
++#define WPA_OUI             0xf25000
++#define WPA_OUI_TYPE        0x01
++#define WPA_VERSION         1          /* current supported version */
++
++#define WPA_CSE_NULL        0x00
++#define WPA_CSE_WEP40       0x01
++#define WPA_CSE_TKIP        0x02
++#define WPA_CSE_CCMP        0x04
++#define WPA_CSE_WEP104      0x05
++
++#define WPA_ASE_NONE        0x00
++#define WPA_ASE_8021X_UNSPEC    0x01
++#define WPA_ASE_8021X_PSK   0x02
++
++#define RSN_OUI         0xac0f00
++#define RSN_VERSION     1       /* current supported version */
++
++#define RSN_CSE_NULL        0x00
++#define RSN_CSE_WEP40       0x01
++#define RSN_CSE_TKIP        0x02
++#define RSN_CSE_WRAP        0x03
++#define RSN_CSE_CCMP        0x04
++#define RSN_CSE_WEP104      0x05
++
++#define RSN_ASE_NONE        0x00
++#define RSN_ASE_8021X_UNSPEC    0x01
++#define RSN_ASE_8021X_PSK   0x02
++
++#define RSN_CAP_PREAUTH     0x01
++
++#define WMM_OUI         0xf25000
++#define WMM_OUI_TYPE        0x02
++#define WMM_INFO_OUI_SUBTYPE    0x00
++#define WMM_PARAM_OUI_SUBTYPE   0x01
++#define WMM_VERSION     1
++
++/* WMM stream classes */
++#define WMM_NUM_AC  4
++#define WMM_AC_BE   0       /* best effort */
++#define WMM_AC_BK   1       /* background */
++#define WMM_AC_VI   2       /* video */
++#define WMM_AC_VO   3       /* voice */
++
++/* TSPEC related */
++#define ACTION_CATEGORY_CODE_TSPEC                 17
++#define ACTION_CODE_TSPEC_ADDTS                    0
++#define ACTION_CODE_TSPEC_ADDTS_RESP               1
++#define ACTION_CODE_TSPEC_DELTS                    2
++
++typedef enum {
++    TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0,
++    TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1,
++    TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3,
++    TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8,
++    TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9,
++    TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA,
++    TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB,
++    TSPEC_STATUS_CODE_DELTS_SENT    = 0x30,
++    TSPEC_STATUS_CODE_DELTS_RECV    = 0x31,
++} TSPEC_STATUS_CODE;
++
++/*
++ * WMM/802.11e Tspec Element
++ */
++typedef PREPACK struct wmm_tspec_ie_t {
++    A_UINT8     elementId;
++    A_UINT8     len;
++    A_UINT8     oui[3];
++    A_UINT8     ouiType;
++    A_UINT8     ouiSubType;
++    A_UINT8     version;
++    A_UINT16    tsInfo_info;
++    A_UINT8     tsInfo_reserved;
++    A_UINT16    nominalMSDU;
++    A_UINT16    maxMSDU;
++    A_UINT32    minServiceInt;
++    A_UINT32    maxServiceInt;
++    A_UINT32    inactivityInt;
++    A_UINT32    suspensionInt;
++    A_UINT32    serviceStartTime;
++    A_UINT32    minDataRate;
++    A_UINT32    meanDataRate;
++    A_UINT32    peakDataRate;
++    A_UINT32    maxBurstSize;
++    A_UINT32    delayBound;
++    A_UINT32    minPhyRate;
++    A_UINT16    sba;
++    A_UINT16    mediumTime;
++} POSTPACK WMM_TSPEC_IE;
++
++
++/*
++ * BEACON management packets
++ *
++ *  octet timestamp[8]
++ *  octet beacon interval[2]
++ *  octet capability information[2]
++ *  information element
++ *      octet elemid
++ *      octet length
++ *      octet information[length]
++ */
++
++#define IEEE80211_BEACON_INTERVAL(beacon) \
++    ((beacon)[8] | ((beacon)[9] << 8))
++#define IEEE80211_BEACON_CAPABILITY(beacon) \
++    ((beacon)[10] | ((beacon)[11] << 8))
++
++#define IEEE80211_CAPINFO_ESS               0x0001
++#define IEEE80211_CAPINFO_IBSS              0x0002
++#define IEEE80211_CAPINFO_CF_POLLABLE       0x0004
++#define IEEE80211_CAPINFO_CF_POLLREQ        0x0008
++#define IEEE80211_CAPINFO_PRIVACY           0x0010
++#define IEEE80211_CAPINFO_SHORT_PREAMBLE    0x0020
++#define IEEE80211_CAPINFO_PBCC              0x0040
++#define IEEE80211_CAPINFO_CHNL_AGILITY      0x0080
++/* bits 8-9 are reserved */
++#define IEEE80211_CAPINFO_SHORT_SLOTTIME    0x0400
++#define IEEE80211_CAPINFO_APSD              0x0800
++/* bit 12 is reserved */
++#define IEEE80211_CAPINFO_DSSSOFDM          0x2000
++/* bits 14-15 are reserved */
++
++/*
++ * Authentication Modes
++ */
++
++enum ieee80211_authmode {
++    IEEE80211_AUTH_NONE     = 0,
++    IEEE80211_AUTH_OPEN     = 1,
++    IEEE80211_AUTH_SHARED   = 2,
++    IEEE80211_AUTH_8021X    = 3,
++    IEEE80211_AUTH_AUTO     = 4,   /* auto-select/accept */
++    /* NB: these are used only for ioctls */
++    IEEE80211_AUTH_WPA      = 5,  /* WPA/RSN  w/ 802.1x */
++    IEEE80211_AUTH_WPA_PSK  = 6,  /* WPA/RSN  w/ PSK */
++    IEEE80211_AUTH_WPA_CCKM = 7,  /* WPA/RSN IE  w/ CCKM */
++};
++
++#include "athendpack.h"
++
++#endif /* _NET80211_IEEE80211_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211_ioctl.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211_ioctl.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211_ioctl.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211_ioctl.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
++ */
++
++#ifndef _IEEE80211_IOCTL_H_
++#define _IEEE80211_IOCTL_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
++ */
++
++/*
++ * WPA/RSN get/set key request.  Specify the key/cipher
++ * type and whether the key is to be used for sending and/or
++ * receiving.  The key index should be set only when working
++ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
++ * Otherwise a unicast/pairwise key is specified by the bssid
++ * (on a station) or mac address (on an ap).  They key length
++ * must include any MIC key data; otherwise it should be no
++ more than IEEE80211_KEYBUF_SIZE.
++ */
++struct ieee80211req_key {
++      u_int8_t        ik_type;        /* key/cipher type */
++      u_int8_t        ik_pad;
++      u_int16_t       ik_keyix;       /* key index */
++      u_int8_t        ik_keylen;      /* key length in bytes */
++      u_int8_t        ik_flags;
++#define IEEE80211_KEY_XMIT  0x01
++#define IEEE80211_KEY_RECV  0x02
++#define       IEEE80211_KEY_DEFAULT   0x80    /* default xmit key */
++      u_int8_t        ik_macaddr[IEEE80211_ADDR_LEN];
++      u_int64_t       ik_keyrsc;      /* key receive sequence counter */
++      u_int64_t       ik_keytsc;      /* key transmit sequence counter */
++      u_int8_t        ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
++};
++/*
++ * Delete a key either by index or address.  Set the index
++ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
++ */
++struct ieee80211req_del_key {
++      u_int8_t        idk_keyix;      /* key index */
++      u_int8_t        idk_macaddr[IEEE80211_ADDR_LEN];
++};
++/*
++ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
++ * only makes sense when operating as a station.  The other
++ * requests can be used when operating as a station or an
++ * ap (to effect a station).
++ */
++struct ieee80211req_mlme {
++      u_int8_t        im_op;          /* operation to perform */
++#define       IEEE80211_MLME_ASSOC            1       /* associate station */
++#define       IEEE80211_MLME_DISASSOC         2       /* disassociate station */
++#define       IEEE80211_MLME_DEAUTH           3       /* deauthenticate station */
++#define       IEEE80211_MLME_AUTHORIZE        4       /* authorize station */
++#define       IEEE80211_MLME_UNAUTHORIZE      5       /* unauthorize station */
++      u_int16_t       im_reason;      /* 802.11 reason code */
++      u_int8_t        im_macaddr[IEEE80211_ADDR_LEN];
++};
++
++struct ieee80211req_addpmkid {
++    u_int8_t    pi_bssid[IEEE80211_ADDR_LEN];
++    u_int8_t    pi_enable;
++    u_int8_t    pi_pmkid[16];
++};
++
++#define AUTH_ALG_OPEN_SYSTEM  0x01
++#define AUTH_ALG_SHARED_KEY   0x02
++#define AUTH_ALG_LEAP         0x04
++
++struct ieee80211req_authalg {
++   u_int8_t auth_alg;
++};
++
++/*
++ * Request to add an IE to a Management Frame
++ */
++enum{
++    IEEE80211_APPIE_FRAME_BEACON     = 0,
++    IEEE80211_APPIE_FRAME_PROBE_REQ  = 1,
++    IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
++    IEEE80211_APPIE_FRAME_ASSOC_REQ  = 3,
++    IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
++    IEEE80211_APPIE_NUM_OF_FRAME     = 5
++};
++
++/*
++ * The Maximum length of the IE that can be added to a Management frame
++ */
++#define IEEE80211_APPIE_FRAME_MAX_LEN  78
++
++struct ieee80211req_getset_appiebuf {
++    u_int32_t app_frmtype; /* management frame type for which buffer is added */
++    u_int32_t app_buflen;  /*application supplied buffer length */
++    u_int8_t  app_buf[];
++};
++
++/*
++ * The following definitions are used by an application to set filter
++ * for receiving management frames
++ */
++enum {
++     IEEE80211_FILTER_TYPE_BEACON      =   0x1,
++     IEEE80211_FILTER_TYPE_PROBE_REQ   =   0x2,
++     IEEE80211_FILTER_TYPE_PROBE_RESP  =   0x4,
++     IEEE80211_FILTER_TYPE_ASSOC_REQ   =   0x8,
++     IEEE80211_FILTER_TYPE_ASSOC_RESP  =   0x10,
++     IEEE80211_FILTER_TYPE_AUTH        =   0x20,
++     IEEE80211_FILTER_TYPE_DEAUTH      =   0x40,
++     IEEE80211_FILTER_TYPE_DISASSOC    =   0x80,
++     IEEE80211_FILTER_TYPE_ALL         =   0xFF  /* used to check the valid filter bits */
++};
++
++struct ieee80211req_set_filter {
++      u_int32_t app_filterype; /* management frame filter type */
++};
++
++enum {
++    IEEE80211_PARAM_AUTHMODE = 3,   /* Authentication Mode */
++    IEEE80211_PARAM_MCASTCIPHER = 5,
++    IEEE80211_PARAM_MCASTKEYLEN = 6,    /* multicast key length */
++    IEEE80211_PARAM_UCASTCIPHER = 8,
++    IEEE80211_PARAM_UCASTKEYLEN = 9,    /* unicast key length */
++      IEEE80211_PARAM_WPA             = 10,   /* WPA mode (0,1,2) */
++      IEEE80211_PARAM_ROAMING         = 12,   /* roaming mode */
++      IEEE80211_PARAM_PRIVACY         = 13,   /* privacy invoked */
++      IEEE80211_PARAM_COUNTERMEASURES = 14,   /* WPA/TKIP countermeasures */
++      IEEE80211_PARAM_DROPUNENCRYPTED = 15,   /* discard unencrypted frames */
++};
++
++/*
++ * Values for IEEE80211_PARAM_WPA
++ */
++#define WPA_MODE_WPA1   1
++#define WPA_MODE_WPA2   2
++#define WPA_MODE_AUTO   3
++#define WPA_MODE_NONE   4
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _IEEE80211_IOCTL_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211_node.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211_node.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ieee80211_node.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ieee80211_node.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,77 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2006 Atheros Communications, Inc.
++ *
++ * Wireless Network driver for Atheros AR6001
++ * All rights reserved.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ */
++#ifndef _IEEE80211_NODE_H_
++#define _IEEE80211_NODE_H_
++
++/*
++ * Node locking definitions.
++ */
++#define IEEE80211_NODE_LOCK_INIT(_nt)   A_MUTEX_INIT(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_DESTROY(_nt)
++#define IEEE80211_NODE_LOCK(_nt)        A_MUTEX_LOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_UNLOCK(_nt)      A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_BH(_nt)     A_MUTEX_LOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_UNLOCK_BH(_nt)   A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
++#define IEEE80211_NODE_LOCK_ASSERT(_nt)
++
++/*
++ * Node reference counting definitions.
++ *
++ * ieee80211_node_initref   initialize the reference count to 1
++ * ieee80211_node_incref    add a reference
++ * ieee80211_node_decref    remove a reference
++ * ieee80211_node_dectestref    remove a reference and return 1 if this
++ *              is the last reference, otherwise 0
++ * ieee80211_node_refcnt    reference count for printing (only)
++ */
++#define ieee80211_node_initref(_ni)     ((_ni)->ni_refcnt = 1)
++#define ieee80211_node_incref(_ni)      ((_ni)->ni_refcnt++)
++#define ieee80211_node_decref(_ni)      ((_ni)->ni_refcnt--)
++#define ieee80211_node_dectestref(_ni)  (((_ni)->ni_refcnt--) == 0)
++#define ieee80211_node_refcnt(_ni)      ((_ni)->ni_refcnt)
++
++#define IEEE80211_NODE_HASHSIZE 32
++/* simple hash is enough for variation of macaddr */
++#define IEEE80211_NODE_HASH(addr)   \
++    (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \
++        IEEE80211_NODE_HASHSIZE)
++
++/*
++ * Table of ieee80211_node instances.  Each ieee80211com
++ * has at least one for holding the scan candidates.
++ * When operating as an access point or in ibss mode there
++ * is a second table for associated stations or neighbors.
++ */
++struct ieee80211_node_table {
++    void                   *nt_wmip;       /* back reference */
++    A_MUTEX_T               nt_nodelock;    /* on node table */
++    struct bss              *nt_node_first; /* information of all nodes */
++    struct bss              *nt_node_last;  /* information of all nodes */
++    struct bss              *nt_hash[IEEE80211_NODE_HASHSIZE];
++    const char              *nt_name;   /* for debugging */
++    A_UINT32                nt_scangen; /* gen# for timeout scan */
++    A_TIMER                 nt_inact_timer;
++    A_UINT8                 isTimerArmed;   /* is the node timer armed */
++};
++
++#define WLAN_NODE_INACT_TIMEOUT_MSEC            10000
++
++#endif /* _IEEE80211_NODE_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/ini_dset.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ini_dset.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/ini_dset.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/ini_dset.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++#ifndef _INI_DSET_H_
++#define _INI_DSET_H_
++
++/*
++ * Each of these represents a WHAL INI table, which consists
++ * of an "address column" followed by 1 or more "value columns".
++ *
++ * Software uses the base WHAL_INI_DATA_ID+column to access a
++ * DataSet that holds a particular column of data.
++ */
++typedef enum {
++    WHAL_INI_DATA_ID_NULL               =0,
++    WHAL_INI_DATA_ID_MODE_SPECIFIC      =1,  /* 2,3 */
++    WHAL_INI_DATA_ID_COMMON             =4,  /* 5 */
++    WHAL_INI_DATA_ID_BB_RFGAIN          =6,  /* 7,8 */
++    WHAL_INI_DATA_ID_ANALOG_BANK1       =9,  /* 10 */
++    WHAL_INI_DATA_ID_ANALOG_BANK2       =11, /* 12 */
++    WHAL_INI_DATA_ID_ANALOG_BANK3       =13, /* 14, 15 */
++    WHAL_INI_DATA_ID_ANALOG_BANK6       =16, /* 17, 18 */
++    WHAL_INI_DATA_ID_ANALOG_BANK7       =19, /* 20 */
++    WHAL_INI_DATA_ID_MODE_OVERRIDES     =21, /* 22,23 */
++    WHAL_INI_DATA_ID_COMMON_OVERRIDES   =24, /* 25 */
++
++    WHAL_INI_DATA_ID_MAX                =25
++} WHAL_INI_DATA_ID;
++
++typedef PREPACK struct {
++    A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common
++    A_UINT16 offset;
++    A_UINT32 newValue;
++} POSTPACK INI_DSET_REG_OVERRIDE;
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/regDb.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/regDb.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/regDb.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/regDb.h    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (c) 2005 Atheros Communications, Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This module contains the header files for regulatory module,
++ * which include the DB schema and DB values.
++ * $Id:
++ */
++
++#ifndef __REG_DB_H__
++#define __REG_DB_H__
++
++#include "./regulatory/reg_dbschema.h"
++#include "./regulatory/reg_dbvalues.h"
++
++#endif  /* __REG_DB_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/regdump.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/regdump.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/regdump.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/regdump.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,33 @@
++#ifndef __REGDUMP_H__
++#define __REGDUMP_H__
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++#if defined(AR6001)
++#include "AR6001/AR6001_regdump.h"
++#endif
++#if defined(AR6002)
++#include "AR6002/AR6002_regdump.h"
++#endif
++
++#if !defined(__ASSEMBLER__)
++/*
++ * Target CPU state at the time of failure is reflected
++ * in a register dump, which the Host can fetch through
++ * the diagnostic window.
++ */
++struct register_dump_s {
++    A_UINT32 target_id;               /* Target ID */
++    A_UINT32 assline;                 /* Line number (if assertion failure) */
++    A_UINT32 pc;                      /* Program Counter at time of exception */
++    A_UINT32 badvaddr;                /* Virtual address causing exception */
++    CPU_exception_frame_t exc_frame;  /* CPU-specific exception info */
++
++    /* Could copy top of stack here, too.... */
++};
++#endif /* __ASSEMBLER__ */
++#endif /* __REGDUMP_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/targaddrs.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/targaddrs.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/targaddrs.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/targaddrs.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,158 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __TARGADDRS_H__
++#define __TARGADDRS_H__
++#if defined(AR6001)
++#include "AR6001/addrs.h"
++#endif
++#if defined(AR6002)
++#include "AR6002/addrs.h"
++#endif
++
++/*
++ * AR6K option bits, to enable/disable various features.
++ * By default, all option bits are 0.
++ * These bits can be set in LOCAL_SCRATCH register 0.
++ */
++#define AR6K_OPTION_BMI_DISABLE      0x01 /* Disable BMI comm with Host */
++#define AR6K_OPTION_SERIAL_ENABLE    0x02 /* Enable serial port msgs */
++#define AR6K_OPTION_WDT_DISABLE      0x04 /* WatchDog Timer override */
++#define AR6K_OPTION_SLEEP_DISABLE    0x08 /* Disable system sleep */
++#define AR6K_OPTION_STOP_BOOT        0x10 /* Stop boot processes (for ATE) */
++#define AR6K_OPTION_ENABLE_NOANI     0x20 /* Operate without ANI */
++#define AR6K_OPTION_DSET_DISABLE     0x40 /* Ignore DataSets */
++#define AR6K_OPTION_IGNORE_FLASH     0x80 /* Ignore flash during bootup */
++
++/*
++ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
++ * host_interest structure.  It must match the address of the _host_interest
++ * symbol (see linker script).
++ *
++ * Host Interest is shared between Host and Target in order to coordinate
++ * between the two, and is intended to remain constant (with additions only
++ * at the end) across software releases.
++ */
++#define AR6001_HOST_INTEREST_ADDRESS     0x80000600
++#define AR6002_HOST_INTEREST_ADDRESS     0x00500400
++
++#define HOST_INTEREST_MAX_SIZE          0x100
++
++#if !defined(__ASSEMBLER__)
++struct register_dump_s;
++struct dbglog_hdr_s;
++
++/*
++ * These are items that the Host may need to access
++ * via BMI or via the Diagnostic Window. The position
++ * of items in this structure must remain constant
++ * across firmware revisions!
++ *
++ * Types for each item must be fixed size across
++ * target and host platforms.
++ *
++ * More items may be added at the end.
++ */
++struct host_interest_s {
++    /*
++     * Pointer to application-defined area, if any.
++     * Set by Target application during startup.
++     */
++    A_UINT32               hi_app_host_interest;                      /* 0x00 */
++
++    /* Pointer to register dump area, valid after Target crash. */
++    A_UINT32               hi_failure_state;                          /* 0x04 */
++
++    /* Pointer to debug logging header */
++    A_UINT32               hi_dbglog_hdr;                             /* 0x08 */
++
++    /* Indicates whether or not flash is present on Target.
++     * NB: flash_is_present indicator is here not just
++     * because it might be of interest to the Host; but
++     * also because it's set early on by Target's startup
++     * asm code and we need it to have a special RAM address
++     * so that it doesn't get reinitialized with the rest
++     * of data.
++     */
++    A_UINT32               hi_flash_is_present;                       /* 0x0c */
++
++    /*
++     * General-purpose flag bits, similar to AR6000_OPTION_* flags.
++     * Can be used by application rather than by OS.
++     */
++    A_UINT32               hi_option_flag;                            /* 0x10 */
++
++    /*
++     * Boolean that determines whether or not to
++     * display messages on the serial port.
++     */
++    A_UINT32               hi_serial_enable;                          /* 0x14 */
++
++    /* Start address of Flash DataSet index, if any */
++    A_UINT32               hi_dset_list_head;                         /* 0x18 */
++
++    /* Override Target application start address */
++    A_UINT32               hi_app_start;                              /* 0x1c */
++
++    /* Clock and voltage tuning */
++    A_UINT32               hi_skip_clock_init;                        /* 0x20 */
++    A_UINT32               hi_core_clock_setting;                     /* 0x24 */
++    A_UINT32               hi_cpu_clock_setting;                      /* 0x28 */
++    A_UINT32               hi_system_sleep_setting;                   /* 0x2c */
++    A_UINT32               hi_xtal_control_setting;                   /* 0x30 */
++    A_UINT32               hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
++    A_UINT32               hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
++    A_UINT32               hi_ref_voltage_trim_setting;               /* 0x3c */
++    A_UINT32               hi_clock_info;                             /* 0x40 */
++
++    /*
++     * Flash configuration overrides, used only
++     * when firmware is not executing from flash.
++     * (When using flash, modify the global variables
++     * with equivalent names.)
++     */
++    A_UINT32               hi_bank0_addr_value;                       /* 0x44 */
++    A_UINT32               hi_bank0_read_value;                       /* 0x48 */
++    A_UINT32               hi_bank0_write_value;                      /* 0x4c */
++    A_UINT32               hi_bank0_config_value;                     /* 0x50 */
++
++    /* Pointer to Board Data  */
++    A_UINT32               hi_board_data;                             /* 0x54 */
++    A_UINT32               hi_board_data_initialized;                 /* 0x58 */
++
++    A_UINT32               hi_dset_RAM_index_table;                   /* 0x5c */
++
++    A_UINT32               hi_desired_baud_rate;                      /* 0x60 */
++    A_UINT32               hi_dbglog_config;                          /* 0x64 */
++    A_UINT32               hi_end_RAM_reserve_sz;                     /* 0x68 */
++    A_UINT32               hi_mbox_io_block_sz;                       /* 0x6c */
++
++    A_UINT32               hi_num_bpatch_streams;                     /* 0x70 */
++    A_UINT32               hi_mbox_isr_yield_limit;                   /* 0x74 */
++
++    A_UINT32               hi_refclk_hz;                              /* 0x78 */
++};
++
++/* Bits defined in hi_option_flag */
++#define HI_OPTION_TIMER_WAR     1 /* not really used */
++
++/*
++ * Intended for use by Host software, this macro returns the Target RAM
++ * address of any item in the host_interest structure.
++ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
++ */
++#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
++    ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
++
++#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
++    ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
++
++
++#endif /* !__ASSEMBLER__ */
++
++#endif /* __TARGADDRS_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/testcmd.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/testcmd.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/testcmd.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/testcmd.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,144 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef  TESTCMD_H_
++#define  TESTCMD_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef enum {
++    ZEROES_PATTERN = 0,
++    ONES_PATTERN,
++    REPEATING_10,
++    PN7_PATTERN,
++    PN9_PATTERN,
++    PN15_PATTERN
++}TX_DATA_PATTERN;
++
++/* Continous tx
++   mode : TCMD_CONT_TX_OFF - Disabling continous tx
++          TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
++          TCMD_CONT_TX_FRAME- Enable continuous modulated tx
++   freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
++dataRate: 0 - 1 Mbps
++          1 - 2 Mbps
++          2 - 5.5 Mbps
++          3 - 11 Mbps
++          4 - 6 Mbps
++          5 - 9 Mbps
++          6 - 12 Mbps
++          7 - 18 Mbps
++          8 - 24 Mbps
++          9 - 36 Mbps
++         10 - 28 Mbps
++         11 - 54 Mbps
++  txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx
++antenna:  1 - one antenna
++          2 - two antenna
++Note : Enable/disable continuous tx test cmd works only when target is awake.
++*/
++
++typedef enum {
++    TCMD_CONT_TX_OFF = 0,
++    TCMD_CONT_TX_SINE,
++    TCMD_CONT_TX_FRAME,
++    TCMD_CONT_TX_TX99,
++    TCMD_CONT_TX_TX100
++} TCMD_CONT_TX_MODE;
++
++typedef PREPACK struct {
++    A_UINT32                 testCmdId;
++    A_UINT32                mode;
++    A_UINT32                freq;
++    A_UINT32                dataRate;
++    A_INT32                 txPwr;
++    A_UINT32                antenna;
++    A_UINT32                enANI;
++    A_UINT32                scramblerOff;
++    A_UINT32                aifsn;
++    A_UINT16                pktSz;
++    A_UINT16                txPattern;
++} POSTPACK TCMD_CONT_TX;
++
++#define TCMD_TXPATTERN_ZERONE                 0x1
++#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE    0x2
++
++/* Continuous Rx
++ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames)
++      TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest
++                                             address equal specified
++                                             mac address (set via act =3)
++      TCMD_CONT_RX_REPORT  off mode  (disable cont rx mode and get the
++                                          report from the last cont
++                                          Rx test)
++
++     TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the
++                                                 target. This Overrides
++                                                 the default MAC address.)
++
++*/
++typedef enum {
++    TCMD_CONT_RX_PROMIS =0,
++    TCMD_CONT_RX_FILTER,
++    TCMD_CONT_RX_REPORT,
++    TCMD_CONT_RX_SETMAC
++} TCMD_CONT_RX_ACT;
++
++typedef PREPACK struct {
++    A_UINT32         testCmdId;
++    A_UINT32        act;
++    A_UINT32        enANI;
++    PREPACK union {
++        struct PREPACK TCMD_CONT_RX_PARA {
++            A_UINT32    freq;
++            A_UINT32    antenna;
++        } POSTPACK para;
++        struct PREPACK TCMD_CONT_RX_REPORT {
++            A_UINT32    totalPkt;
++            A_INT32    rssiInDBm;
++        } POSTPACK report;
++        struct PREPACK TCMD_CONT_RX_MAC {
++            A_UCHAR    addr[ATH_MAC_LEN];
++        } POSTPACK mac;
++    } POSTPACK u;
++} POSTPACK TCMD_CONT_RX;
++
++/* Force sleep/wake  test cmd
++ mode: TCMD_PM_WAKEUP - Wakeup the target
++       TCMD_PM_SLEEP - Force the target to sleep.
++ */
++typedef enum {
++    TCMD_PM_WAKEUP = 1, /* be consistent with target */
++    TCMD_PM_SLEEP
++} TCMD_PM_MODE;
++
++typedef PREPACK struct {
++      A_UINT32  testCmdId;
++    A_UINT32  mode;
++} POSTPACK TCMD_PM;
++
++typedef enum{
++    TCMD_CONT_TX_ID,
++    TCMD_CONT_RX_ID,
++    TCMD_PM_ID
++   } TCMD_ID;
++
++typedef PREPACK union {
++          TCMD_CONT_TX contTx;
++          TCMD_CONT_RX contRx;
++          TCMD_PM pm ;
++} POSTPACK TEST_CMD;
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* TESTCMD_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/wlan_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wlan_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/wlan_api.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wlan_api.h 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,101 @@
++#ifndef _HOST_WLAN_API_H_
++#define _HOST_WLAN_API_H_
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the API for the host wlan module
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct ieee80211_node_table;
++struct ieee80211_frame;
++
++struct ieee80211_common_ie {
++    A_UINT16    ie_chan;
++    A_UINT8     *ie_tstamp;
++    A_UINT8     *ie_ssid;
++    A_UINT8     *ie_rates;
++    A_UINT8     *ie_xrates;
++    A_UINT8     *ie_country;
++    A_UINT8     *ie_wpa;
++    A_UINT8     *ie_rsn;
++    A_UINT8     *ie_wmm;
++    A_UINT8     *ie_ath;
++    A_UINT16    ie_capInfo;
++    A_UINT16    ie_beaconInt;
++    A_UINT8     *ie_tim;
++    A_UINT8     *ie_chswitch;
++    A_UINT8     ie_erp;
++    A_UINT8     *ie_wsc;
++};
++
++typedef struct bss {
++    A_UINT8                      ni_macaddr[6];
++    A_UINT8                      ni_snr;
++    A_INT16                      ni_rssi;
++    struct bss                   *ni_list_next;
++    struct bss                   *ni_list_prev;
++    struct bss                   *ni_hash_next;
++    struct bss                   *ni_hash_prev;
++    struct ieee80211_common_ie   ni_cie;
++    A_UINT8                     *ni_buf;
++    struct ieee80211_node_table *ni_table;
++    A_UINT32                     ni_refcnt;
++    int                          ni_scangen;
++    A_UINT32                     ni_tstamp;
++} bss_t;
++
++typedef void wlan_node_iter_func(void *arg, bss_t *);
++
++bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size);
++void wlan_node_free(bss_t *ni);
++void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
++                const A_UINT8 *macaddr);
++bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr);
++void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni);
++void wlan_free_allnodes(struct ieee80211_node_table *nt);
++void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
++                        void *arg);
++
++void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt);
++void wlan_node_table_reset(struct ieee80211_node_table *nt);
++void wlan_node_table_cleanup(struct ieee80211_node_table *nt);
++
++A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen,
++                           struct ieee80211_common_ie *cie);
++
++A_UINT16 wlan_ieee2freq(int chan);
++A_UINT32 wlan_freq2ieee(A_UINT16 freq);
++
++
++bss_t *
++wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
++                                      A_UINT32 ssidLength, A_BOOL bIsWPA2);
++
++void
++wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _HOST_WLAN_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/wlan_dset.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wlan_dset.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/wlan_dset.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wlan_dset.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,20 @@
++/*
++ * Copyright (c) 2007 Atheros Communications, Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ */
++
++#ifndef __WLAN_DSET_H__
++#define __WKAN_DSET_H__
++
++typedef PREPACK struct wow_config_dset {
++
++    A_UINT8 valid_dset;
++    A_UINT8 gpio_enable;
++    A_UINT16 gpio_pin;
++} POSTPACK WOW_CONFIG_DSET;
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmi_api.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmi_api.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmi_api.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmi_api.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,260 @@
++#ifndef _WMI_API_H_
++#define _WMI_API_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains the definitions for the Wireless Module Interface (WMI).
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * IP QoS Field definitions according to 802.1p
++ */
++#define BEST_EFFORT_PRI         0
++#define BACKGROUND_PRI          1
++#define EXCELLENT_EFFORT_PRI    3
++#define CONTROLLED_LOAD_PRI     4
++#define VIDEO_PRI               5
++#define VOICE_PRI               6
++#define NETWORK_CONTROL_PRI     7
++#define MAX_NUM_PRI             8
++
++#define UNDEFINED_PRI           (0xff)
++
++/* simple mapping of IP TOS field to a WMI priority stream
++ * this mapping was taken from the original linux driver implementation
++ * The operation maps the following
++ *
++ *  */
++#define IP_TOS_TO_WMI_PRI(tos)  \
++    ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03))
++
++#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */
++
++
++struct wmi_t;
++
++void *wmi_init(void *devt);
++
++void wmi_qos_state_init(struct wmi_t *wmip);
++void wmi_shutdown(struct wmi_t *wmip);
++A_UINT16  wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8);
++A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType);
++A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf);
++A_STATUS wmi_syncpoint(struct wmi_t *wmip);
++A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip);
++WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass);
++A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up);
++
++A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf);
++void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg);
++void wmi_free_allnodes(struct wmi_t *wmip);
++bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr);
++
++
++typedef enum {
++    NO_SYNC_WMIFLAG = 0,
++    SYNC_BEFORE_WMIFLAG,            /* transmit all queued data before cmd */
++    SYNC_AFTER_WMIFLAG,             /* any new data waits until cmd execs */
++    SYNC_BOTH_WMIFLAG,
++    END_WMIFLAG                     /* end marker */
++} WMI_SYNC_FLAG;
++
++A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++                      WMI_SYNC_FLAG flag);
++A_STATUS wmi_connect_cmd(struct wmi_t *wmip,
++                         NETWORK_TYPE netType,
++                         DOT11_AUTH_MODE dot11AuthMode,
++                         AUTH_MODE authMode,
++                         CRYPTO_TYPE pairwiseCrypto,
++                         A_UINT8 pairwiseCryptoLen,
++                         CRYPTO_TYPE groupCrypto,
++                         A_UINT8 groupCryptoLen,
++                         int ssidLength,
++                         A_UCHAR *ssid,
++                         A_UINT8 *bssid,
++                         A_UINT16 channel,
++                         A_UINT32 ctrl_flags);
++A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip,
++                           A_UINT8 *bssid,
++                           A_UINT16 channel);
++A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip);
++A_STATUS wmi_getrev_cmd(struct wmi_t *wmip);
++A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
++                           A_BOOL forceFgScan, A_BOOL isLegacy,
++                           A_UINT32 homeDwellTime, A_UINT32 forceScanInterval);
++A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
++                            A_UINT16 fg_end_sec, A_UINT16 bg_sec,
++                            A_UINT16 minact_chdw_msec,
++                            A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec,
++                            A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
++                            A_UINT32 max_dfsch_act_time);
++A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask);
++A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
++                            A_UINT8 ssidLength, A_UCHAR *ssid);
++A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons);
++A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons);
++A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
++                           A_UINT8 ieLen, A_UINT8 *ieInfo);
++A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode);
++A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
++                            A_UINT16 atim_windows, A_UINT16 timeout_value);
++A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
++                           A_UINT16 psPollNum, A_UINT16 dtimPolicy);
++A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout);
++A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber);
++A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream);
++A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID);
++A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate);
++A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip);
++A_INT8   wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate);
++A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip);
++A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
++                                   WMI_PHY_MODE mode, A_INT8 numChan,
++                                   A_UINT16 *channelList);
++
++A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip,
++                                       WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd);
++A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip,
++                                        WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd);
++A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip);
++A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip,
++                                      WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd);
++A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold);
++A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status);
++
++A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask);
++
++A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie,
++                                    A_UINT32 source);
++A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
++                                     A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
++                                     A_UINT32 valid);
++A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip);
++A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex,
++                        CRYPTO_TYPE keyType, A_UINT8 keyUsage,
++                        A_UINT8 keyLength,A_UINT8 *keyRSC,
++                        A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
++                        WMI_SYNC_FLAG sync_flag);
++A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk);
++A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip);
++A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex);
++A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip,
++                                 WMI_SET_AKMP_PARAMS_CMD *akmpParams);
++A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
++                                WMI_SET_PMKID_LIST_CMD *pmkInfo);
++A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM);
++A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip);
++A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on);
++A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid);
++A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex);
++A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en);
++A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
++                          A_BOOL set);
++A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop,
++                                   A_UINT8 eCWmin, A_UINT8 eCWmax,
++                                   A_UINT8 aifsn);
++A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
++                                  A_UINT8 trafficClass, A_UINT8 maxRetries,
++                                  A_UINT8 enableNotify);
++
++void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid);
++
++A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip);
++A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType);
++A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
++                               A_UINT8 size);
++A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
++                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
++                            A_UINT8 size);
++
++A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode);
++A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
++                              A_UINT8 frmType,
++                              A_UINT8 *dstMacAddr,
++                              A_UINT8 *bssid,
++                              A_UINT16 optIEDataLen,
++                              A_UINT8 *optIEData);
++
++A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl);
++A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize);
++A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen);
++A_UINT8  convert_userPriority_to_trafficClass(A_UINT8 userPriority);
++A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip);
++A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance);
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len);
++#endif
++
++A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status);
++A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd);
++
++
++/*
++ *  This function is used to configure the fix rates mask to the target.
++ */
++A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask);
++A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip);
++
++A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
++
++A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
++
++A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status);
++A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable);
++
++A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip);
++A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip);
++A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval);
++
++A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType,
++                           A_UINT8 ieLen,A_UINT8 *ieInfo);
++
++A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen);
++A_INT32 wmi_get_rate(A_INT8 rateindex);
++
++/*Wake on Wireless WMI commands*/
++A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd);
++A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd);
++A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd);
++A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size);
++A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_DEL_WOW_PATTERN_CMD *cmd);
++A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status);
++
++bss_t *
++wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
++                                 A_UINT32 ssidLength, A_BOOL bIsWPA2);
++
++void
++wmi_node_return (struct wmi_t *wmip, bss_t *bss);
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_API_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmi.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmi.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmi.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1743 @@
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains the definitions of the WMI protocol specified in the
++ * Wireless Module Interface (WMI).  It includes definitions of all the
++ * commands and events. Commands are messages from the host to the WM.
++ * Events and Replies are messages from the WM to the host.
++ *
++ * Ownership of correctness in regards to WMI commands
++ * belongs to the host driver and the WM is not required to validate
++ * parameters for value, proper range, or any other checking.
++ *
++ */
++
++#ifndef _WMI_H_
++#define _WMI_H_
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#include "wmix.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define WMI_PROTOCOL_VERSION    0x0002
++#define WMI_PROTOCOL_REVISION   0x0000
++
++#define ATH_MAC_LEN             6               /* length of mac in bytes */
++#define WMI_CMD_MAX_LEN         100
++#define WMI_CONTROL_MSG_MAX_LEN     256
++#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
++#define IS_ETHERTYPE(_typeOrLen)        ((_typeOrLen) >= 0x0600)
++#define RFC1042OUI      {0x00, 0x00, 0x00}
++
++#define IP_ETHERTYPE 0x0800
++
++#define WMI_IMPLICIT_PSTREAM 0xFF
++#define WMI_MAX_THINSTREAM 15
++
++struct host_app_area_s {
++    A_UINT32 wmi_protocol_ver;
++};
++
++/*
++ * Data Path
++ */
++typedef PREPACK struct {
++    A_UINT8     dstMac[ATH_MAC_LEN];
++    A_UINT8     srcMac[ATH_MAC_LEN];
++    A_UINT16    typeOrLen;
++} POSTPACK ATH_MAC_HDR;
++
++typedef PREPACK struct {
++    A_UINT8     dsap;
++    A_UINT8     ssap;
++    A_UINT8     cntl;
++    A_UINT8     orgCode[3];
++    A_UINT16    etherType;
++} POSTPACK ATH_LLC_SNAP_HDR;
++
++typedef enum {
++    DATA_MSGTYPE = 0x0,
++    CNTL_MSGTYPE,
++    SYNC_MSGTYPE
++} WMI_MSG_TYPE;
++
++
++typedef PREPACK struct {
++    A_INT8      rssi;
++    A_UINT8     info;            /* WMI_MSG_TYPE in lower 2 bits - b1b0 */
++                                 /* UP in next 3 bits - b4b3b2 */
++#define WMI_DATA_HDR_MSG_TYPE_MASK  0x03
++#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
++#define WMI_DATA_HDR_UP_MASK        0x07
++#define WMI_DATA_HDR_UP_SHIFT       2
++#define WMI_DATA_HDR_IS_MSG_TYPE(h, t)  (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
++} POSTPACK WMI_DATA_HDR;
++
++
++#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
++#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
++
++/*
++ * Control Path
++ */
++typedef PREPACK struct {
++    A_UINT16    commandId;
++} POSTPACK WMI_CMD_HDR;        /* used for commands and events */
++
++/*
++ * List of Commnands
++ */
++typedef enum {
++    WMI_CONNECT_CMDID           = 0x0001,
++    WMI_RECONNECT_CMDID,
++    WMI_DISCONNECT_CMDID,
++    WMI_SYNCHRONIZE_CMDID,
++    WMI_CREATE_PSTREAM_CMDID,
++    WMI_DELETE_PSTREAM_CMDID,
++    WMI_START_SCAN_CMDID,
++    WMI_SET_SCAN_PARAMS_CMDID,
++    WMI_SET_BSS_FILTER_CMDID,
++    WMI_SET_PROBED_SSID_CMDID,
++    WMI_SET_LISTEN_INT_CMDID,
++    WMI_SET_BMISS_TIME_CMDID,
++    WMI_SET_DISC_TIMEOUT_CMDID,
++    WMI_GET_CHANNEL_LIST_CMDID,
++    WMI_SET_BEACON_INT_CMDID,
++    WMI_GET_STATISTICS_CMDID,
++    WMI_SET_CHANNEL_PARAMS_CMDID,
++    WMI_SET_POWER_MODE_CMDID,
++    WMI_SET_IBSS_PM_CAPS_CMDID,
++    WMI_SET_POWER_PARAMS_CMDID,
++    WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
++    WMI_ADD_CIPHER_KEY_CMDID,
++    WMI_DELETE_CIPHER_KEY_CMDID,
++    WMI_ADD_KRK_CMDID,
++    WMI_DELETE_KRK_CMDID,
++    WMI_SET_PMKID_CMDID,
++    WMI_SET_TX_PWR_CMDID,
++    WMI_GET_TX_PWR_CMDID,
++    WMI_SET_ASSOC_INFO_CMDID,
++    WMI_ADD_BAD_AP_CMDID,
++    WMI_DELETE_BAD_AP_CMDID,
++    WMI_SET_TKIP_COUNTERMEASURES_CMDID,
++    WMI_RSSI_THRESHOLD_PARAMS_CMDID,
++    WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
++    WMI_SET_ACCESS_PARAMS_CMDID,
++    WMI_SET_RETRY_LIMITS_CMDID,
++    WMI_SET_OPT_MODE_CMDID,
++    WMI_OPT_TX_FRAME_CMDID,
++    WMI_SET_VOICE_PKT_SIZE_CMDID,
++    WMI_SET_MAX_SP_LEN_CMDID,
++    WMI_SET_ROAM_CTRL_CMDID,
++    WMI_GET_ROAM_TBL_CMDID,
++    WMI_GET_ROAM_DATA_CMDID,
++    WMI_ENABLE_RM_CMDID,
++    WMI_SET_MAX_OFFHOME_DURATION_CMDID,
++    WMI_EXTENSION_CMDID,                        /* Non-wireless extensions */
++    WMI_SNR_THRESHOLD_PARAMS_CMDID,
++    WMI_LQ_THRESHOLD_PARAMS_CMDID,
++    WMI_SET_LPREAMBLE_CMDID,
++    WMI_SET_RTS_CMDID,
++    WMI_CLR_RSSI_SNR_CMDID,
++    WMI_SET_FIXRATES_CMDID,
++    WMI_GET_FIXRATES_CMDID,
++    WMI_SET_AUTH_MODE_CMDID,
++    WMI_SET_REASSOC_MODE_CMDID,
++    WMI_SET_WMM_CMDID,
++    WMI_SET_WMM_TXOP_CMDID,
++    WMI_TEST_CMDID,
++    WMI_SET_BT_STATUS_CMDID,
++    WMI_SET_BT_PARAMS_CMDID,
++
++    WMI_SET_KEEPALIVE_CMDID,
++    WMI_GET_KEEPALIVE_CMDID,
++    WMI_SET_APPIE_CMDID,
++    WMI_GET_APPIE_CMDID,
++    WMI_SET_WSC_STATUS_CMDID,
++
++    /* Wake on Wireless */
++    WMI_SET_HOST_SLEEP_MODE_CMDID,
++    WMI_SET_WOW_MODE_CMDID,
++    WMI_GET_WOW_LIST_CMDID,
++    WMI_ADD_WOW_PATTERN_CMDID,
++    WMI_DEL_WOW_PATTERN_CMDID,
++    WMI_SET_MAC_ADDRESS_CMDID,
++    WMI_SET_AKMP_PARAMS_CMDID,
++    WMI_SET_PMKID_LIST_CMDID,
++    WMI_GET_PMKID_LIST_CMDID,
++
++    /*
++     * Developer commands starts at 0xF000
++     */
++    WMI_SET_BITRATE_CMDID = 0xF000,
++    WMI_GET_BITRATE_CMDID,
++    WMI_SET_WHALPARAM_CMDID,
++
++} WMI_COMMAND_ID;
++
++/*
++ * Frame Types
++ */
++typedef enum {
++    WMI_FRAME_BEACON        =   0,
++    WMI_FRAME_PROBE_REQ,
++    WMI_FRAME_PROBE_RESP,
++    WMI_FRAME_ASSOC_REQ,
++    WMI_FRAME_ASSOC_RESP,
++    WMI_NUM_MGMT_FRAME
++} WMI_MGMT_FRAME_TYPE;
++
++/*
++ * Connect Command
++ */
++typedef enum {
++    INFRA_NETWORK       = 0x01,
++    ADHOC_NETWORK       = 0x02,
++    ADHOC_CREATOR       = 0x04,
++} NETWORK_TYPE;
++
++typedef enum {
++    OPEN_AUTH           = 0x01,
++    SHARED_AUTH         = 0x02,
++    LEAP_AUTH           = 0x04,  /* different from IEEE_AUTH_MODE definitions */
++} DOT11_AUTH_MODE;
++
++typedef enum {
++    NONE_AUTH           = 0x01,
++    WPA_AUTH            = 0x02,
++    WPA_PSK_AUTH        = 0x03,
++    WPA2_AUTH           = 0x04,
++    WPA2_PSK_AUTH       = 0x05,
++    WPA_AUTH_CCKM       = 0x06,
++    WPA2_AUTH_CCKM      = 0x07,
++} AUTH_MODE;
++
++typedef enum {
++    NONE_CRYPT          = 0x01,
++    WEP_CRYPT           = 0x02,
++    TKIP_CRYPT          = 0x03,
++    AES_CRYPT           = 0x04,
++} CRYPTO_TYPE;
++
++#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
++#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
++
++#define WMI_MIN_KEY_INDEX   0
++#define WMI_MAX_KEY_INDEX   3
++
++#define WMI_MAX_KEY_LEN     32
++
++#define WMI_MAX_SSID_LEN    32
++
++typedef enum {
++    CONNECT_ASSOC_POLICY_USER = 0x0001,
++    CONNECT_SEND_REASSOC = 0x0002,
++    CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
++    CONNECT_PROFILE_MATCH_DONE = 0x0008,
++    CONNECT_IGNORE_AAC_BEACON = 0x0010,
++    CONNECT_CSA_FOLLOW_BSS = 0x0020,
++} WMI_CONNECT_CTRL_FLAGS_BITS;
++
++#define DEFAULT_CONNECT_CTRL_FLAGS         (CONNECT_CSA_FOLLOW_BSS)
++
++typedef PREPACK struct {
++    A_UINT8     networkType;
++    A_UINT8     dot11AuthMode;
++    A_UINT8     authMode;
++    A_UINT8     pairwiseCryptoType;
++    A_UINT8     pairwiseCryptoLen;
++    A_UINT8     groupCryptoType;
++    A_UINT8     groupCryptoLen;
++    A_UINT8     ssidLength;
++    A_UCHAR     ssid[WMI_MAX_SSID_LEN];
++    A_UINT16    channel;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT32    ctrl_flags;
++} POSTPACK WMI_CONNECT_CMD;
++
++/*
++ * WMI_RECONNECT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;                    /* hint */
++    A_UINT8     bssid[ATH_MAC_LEN];         /* mandatory if set */
++} POSTPACK WMI_RECONNECT_CMD;
++
++/*
++ * WMI_ADD_CIPHER_KEY_CMDID
++ */
++typedef enum {
++    PAIRWISE_USAGE      = 0x00,
++    GROUP_USAGE         = 0x01,
++    TX_USAGE            = 0x02,     /* default Tx Key - Static WEP only */
++} KEY_USAGE;
++
++/*
++ * Bit Flag
++ * Bit 0 - Initialise TSC - default is Initialize
++ */
++#define KEY_OP_INIT_TSC       0x01
++#define KEY_OP_INIT_RSC       0x02
++
++#define KEY_OP_INIT_VAL     0x03     /* Default Initialise the TSC & RSC */
++#define KEY_OP_VALID_MASK   0x03
++
++typedef PREPACK struct {
++    A_UINT8     keyIndex;
++    A_UINT8     keyType;
++    A_UINT8     keyUsage;           /* KEY_USAGE */
++    A_UINT8     keyLength;
++    A_UINT8     keyRSC[8];          /* key replay sequence counter */
++    A_UINT8     key[WMI_MAX_KEY_LEN];
++    A_UINT8     key_op_ctrl;       /* Additional Key Control information */
++} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
++
++/*
++ * WMI_DELETE_CIPHER_KEY_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     keyIndex;
++} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
++
++#define WMI_KRK_LEN     16
++/*
++ * WMI_ADD_KRK_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     krk[WMI_KRK_LEN];
++} POSTPACK WMI_ADD_KRK_CMD;
++
++/*
++ * WMI_SET_TKIP_COUNTERMEASURES_CMDID
++ */
++typedef enum {
++    WMI_TKIP_CM_DISABLE = 0x0,
++    WMI_TKIP_CM_ENABLE  = 0x1,
++} WMI_TKIP_CM_CONTROL;
++
++typedef PREPACK struct {
++    A_UINT8  cm_en;                     /* WMI_TKIP_CM_CONTROL */
++} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
++
++/*
++ * WMI_SET_PMKID_CMDID
++ */
++
++#define WMI_PMKID_LEN 16
++
++typedef enum {
++   PMKID_DISABLE = 0,
++   PMKID_ENABLE  = 1,
++} PMKID_ENABLE_FLG;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     enable;                 /* PMKID_ENABLE_FLG */
++    A_UINT8     pmkid[WMI_PMKID_LEN];
++} POSTPACK WMI_SET_PMKID_CMD;
++
++/*
++ * WMI_START_SCAN_CMD
++ */
++typedef enum {
++    WMI_LONG_SCAN  = 0,
++    WMI_SHORT_SCAN = 1,
++} WMI_SCAN_TYPE;
++
++typedef PREPACK struct {
++    A_BOOL   forceFgScan;
++    A_BOOL   isLegacy;        /* For Legacy Cisco AP compatibility */
++    A_UINT32 homeDwellTime;   /* Maximum duration in the home channel(milliseconds) */
++    A_UINT32 forceScanInterval;    /* Time interval between scans (milliseconds)*/
++    A_UINT8  scanType;           /* WMI_SCAN_TYPE */
++} POSTPACK WMI_START_SCAN_CMD;
++
++/*
++ * WMI_SET_SCAN_PARAMS_CMDID
++ */
++#define WMI_SHORTSCANRATIO_DEFAULT      3
++typedef enum {
++    CONNECT_SCAN_CTRL_FLAGS = 0x01,    /* set if can scan in the Connect cmd */
++    SCAN_CONNECTED_CTRL_FLAGS = 0x02,  /* set if scan for the SSID it is */
++                                       /* already connected to */
++    ACTIVE_SCAN_CTRL_FLAGS = 0x04,     /* set if enable active scan */
++    ROAM_SCAN_CTRL_FLAGS = 0x08,       /* set if enable roam scan when bmiss and lowrssi */
++    REPORT_BSSINFO_CTRL_FLAGS = 0x10,   /* set if follows customer BSSINFO reporting rule */
++    ENABLE_AUTO_CTRL_FLAGS = 0x20,      /* if disabled, target doesn't
++                                          scan after a disconnect event  */
++    ENABLE_SCAN_ABORT_EVENT = 0x40      /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
++
++} WMI_SCAN_CTRL_FLAGS_BITS;
++
++#define CAN_SCAN_IN_CONNECT(flags)      (flags & CONNECT_SCAN_CTRL_FLAGS)
++#define CAN_SCAN_CONNECTED(flags)       (flags & SCAN_CONNECTED_CTRL_FLAGS)
++#define ENABLE_ACTIVE_SCAN(flags)       (flags & ACTIVE_SCAN_CTRL_FLAGS)
++#define ENABLE_ROAM_SCAN(flags)         (flags & ROAM_SCAN_CTRL_FLAGS)
++#define CONFIG_REPORT_BSSINFO(flags)     (flags & REPORT_BSSINFO_CTRL_FLAGS)
++#define IS_AUTO_SCAN_ENABLED(flags)      (flags & ENABLE_AUTO_CTRL_FLAGS)
++#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
++
++#define DEFAULT_SCAN_CTRL_FLAGS         (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
++
++
++typedef PREPACK struct {
++    A_UINT16    fg_start_period;        /* seconds */
++    A_UINT16    fg_end_period;          /* seconds */
++    A_UINT16    bg_period;              /* seconds */
++    A_UINT16    maxact_chdwell_time;    /* msec */
++    A_UINT16    pas_chdwell_time;       /* msec */
++    A_UINT8     shortScanRatio;         /* how many shorts scan for one long */
++    A_UINT8     scanCtrlFlags;
++    A_UINT16    minact_chdwell_time;    /* msec */
++    A_UINT32    max_dfsch_act_time;  /* msecs */
++} POSTPACK WMI_SCAN_PARAMS_CMD;
++
++/*
++ * WMI_SET_BSS_FILTER_CMDID
++ */
++typedef enum {
++    NONE_BSS_FILTER = 0x0,              /* no beacons forwarded */
++    ALL_BSS_FILTER,                     /* all beacons forwarded */
++    PROFILE_FILTER,                     /* only beacons matching profile */
++    ALL_BUT_PROFILE_FILTER,             /* all but beacons matching profile */
++    CURRENT_BSS_FILTER,                 /* only beacons matching current BSS */
++    ALL_BUT_BSS_FILTER,                 /* all but beacons matching BSS */
++    PROBED_SSID_FILTER,                 /* beacons matching probed ssid */
++    LAST_BSS_FILTER,                    /* marker only */
++} WMI_BSS_FILTER;
++
++typedef PREPACK struct {
++    A_UINT8    bssFilter;                      /* see WMI_BSS_FILTER */
++    A_UINT32   ieMask;
++} POSTPACK WMI_BSS_FILTER_CMD;
++
++/*
++ * WMI_SET_PROBED_SSID_CMDID
++ */
++#define MAX_PROBED_SSID_INDEX   5
++
++typedef enum {
++    DISABLE_SSID_FLAG  = 0,                  /* disables entry */
++    SPECIFIC_SSID_FLAG = 0x01,               /* probes specified ssid */
++    ANY_SSID_FLAG      = 0x02,               /* probes for any ssid */
++} WMI_SSID_FLAG;
++
++typedef PREPACK struct {
++    A_UINT8     entryIndex;                     /* 0 to MAX_PROBED_SSID_INDEX */
++    A_UINT8     flag;                           /* WMI_SSID_FLG */
++    A_UINT8     ssidLength;
++    A_UINT8     ssid[32];
++} POSTPACK WMI_PROBED_SSID_CMD;
++
++/*
++ * WMI_SET_LISTEN_INT_CMDID
++ * The Listen interval is between 15 and 3000 TUs
++ */
++#define MIN_LISTEN_INTERVAL 15
++#define MAX_LISTEN_INTERVAL 5000
++#define MIN_LISTEN_BEACONS 1
++#define MAX_LISTEN_BEACONS 50
++
++typedef PREPACK struct {
++    A_UINT16     listenInterval;
++    A_UINT16     numBeacons;
++} POSTPACK WMI_LISTEN_INT_CMD;
++
++/*
++ * WMI_SET_BEACON_INT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16     beaconInterval;
++} POSTPACK WMI_BEACON_INT_CMD;
++
++/*
++ * WMI_SET_BMISS_TIME_CMDID
++ * valid values are between 1000 and 5000 TUs
++ */
++
++#define MIN_BMISS_TIME     1000
++#define MAX_BMISS_TIME     5000
++#define MIN_BMISS_BEACONS  1
++#define MAX_BMISS_BEACONS  50
++
++typedef PREPACK struct {
++    A_UINT16     bmissTime;
++    A_UINT16     numBeacons;
++} POSTPACK WMI_BMISS_TIME_CMD;
++
++/*
++ * WMI_SET_POWER_MODE_CMDID
++ */
++typedef enum {
++    REC_POWER = 0x01,
++    MAX_PERF_POWER,
++} WMI_POWER_MODE;
++
++typedef PREPACK struct {
++    A_UINT8     powerMode;      /* WMI_POWER_MODE */
++} POSTPACK WMI_POWER_MODE_CMD;
++
++/*
++ * WMI_SET_POWER_PARAMS_CMDID
++ */
++typedef enum {
++    IGNORE_DTIM = 0x01,
++    NORMAL_DTIM = 0x02,
++    STICK_DTIM  = 0x03,
++} WMI_DTIM_POLICY;
++
++typedef PREPACK struct {
++    A_UINT16    idle_period;             /* msec */
++    A_UINT16    pspoll_number;
++    A_UINT16    dtim_policy;
++} POSTPACK WMI_POWER_PARAMS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8    power_saving;
++    A_UINT8    ttl; /* number of beacon periods */
++    A_UINT16   atim_windows;          /* msec */
++    A_UINT16   timeout_value;         /* msec */
++} POSTPACK WMI_IBSS_PM_CAPS_CMD;
++
++/*
++ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
++ */
++typedef enum {
++    IGNORE_TIM_ALL_QUEUES_APSD = 0,
++    PROCESS_TIM_ALL_QUEUES_APSD = 1,
++    IGNORE_TIM_SIMULATED_APSD = 2,
++    PROCESS_TIM_SIMULATED_APSD = 3,
++} APSD_TIM_POLICY;
++
++typedef PREPACK struct {
++    A_UINT16    psPollTimeout;          /* msec */
++    A_UINT16    triggerTimeout;         /* msec */
++    A_UINT32    apsdTimPolicy;      /* TIM behavior with  ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
++    A_UINT32    simulatedAPSDTimPolicy;      /* TIM behavior with  simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
++} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
++
++/*
++ * WMI_SET_VOICE_PKT_SIZE_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT16    voicePktSize;
++} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
++
++/*
++ * WMI_SET_MAX_SP_LEN_CMDID
++ */
++typedef enum {
++    DELIVER_ALL_PKT = 0x0,
++    DELIVER_2_PKT = 0x1,
++    DELIVER_4_PKT = 0x2,
++    DELIVER_6_PKT = 0x3,
++} APSD_SP_LEN_TYPE;
++
++typedef PREPACK struct {
++    A_UINT8    maxSPLen;
++} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
++
++/*
++ * WMI_SET_DISC_TIMEOUT_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     disconnectTimeout;          /* seconds */
++} POSTPACK WMI_DISC_TIMEOUT_CMD;
++
++typedef enum {
++    UPLINK_TRAFFIC = 0,
++    DNLINK_TRAFFIC = 1,
++    BIDIR_TRAFFIC = 2,
++} DIR_TYPE;
++
++typedef enum {
++    DISABLE_FOR_THIS_AC = 0,
++    ENABLE_FOR_THIS_AC  = 1,
++    ENABLE_FOR_ALL_AC   = 2,
++} VOICEPS_CAP_TYPE;
++
++typedef enum {
++    TRAFFIC_TYPE_APERIODIC = 0,
++    TRAFFIC_TYPE_PERIODIC = 1,
++}TRAFFIC_TYPE;
++
++/*
++ * WMI_CREATE_PSTREAM_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT32        minServiceInt;           /* in milli-sec */
++    A_UINT32        maxServiceInt;           /* in milli-sec */
++    A_UINT32        inactivityInt;           /* in milli-sec */
++    A_UINT32        suspensionInt;           /* in milli-sec */
++    A_UINT32        serviceStartTime;
++    A_UINT32        minDataRate;             /* in bps */
++    A_UINT32        meanDataRate;            /* in bps */
++    A_UINT32        peakDataRate;            /* in bps */
++    A_UINT32        maxBurstSize;
++    A_UINT32        delayBound;
++    A_UINT32        minPhyRate;              /* in bps */
++    A_UINT32        sba;
++    A_UINT32        mediumTime;
++    A_UINT16        nominalMSDU;             /* in octects */
++    A_UINT16        maxMSDU;                 /* in octects */
++    A_UINT8         trafficClass;
++    A_UINT8         trafficType;             /* TRAFFIC_TYPE */
++    A_UINT8         trafficDirection;        /* TRAFFIC_DIR */
++    A_UINT8         voicePSCapability;       /* VOICEPS_CAP_TYPE */
++    A_UINT8         tsid;
++    A_UINT8         userPriority;            /* 802.1D user priority */
++} POSTPACK WMI_CREATE_PSTREAM_CMD;
++
++/*
++ * WMI_DELETE_PSTREAM_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     trafficClass;
++    A_UINT8     tsid;
++} POSTPACK WMI_DELETE_PSTREAM_CMD;
++
++/*
++ * WMI_SET_CHANNEL_PARAMS_CMDID
++ */
++typedef enum {
++    WMI_11A_MODE  = 0x1,
++    WMI_11G_MODE  = 0x2,
++    WMI_11AG_MODE = 0x3,
++    WMI_11B_MODE  = 0x4,
++    WMI_11GONLY_MODE = 0x5,
++} WMI_PHY_MODE;
++
++#define WMI_MAX_CHANNELS        32
++
++typedef PREPACK struct {
++    A_UINT8     reserved1;
++    A_UINT8     scanParam;              /* set if enable scan */
++    A_UINT8     phyMode;                /* see WMI_PHY_MODE */
++    A_UINT8     numChannels;            /* how many channels follow */
++    A_UINT16    channelList[1];         /* channels in Mhz */
++} POSTPACK WMI_CHANNEL_PARAMS_CMD;
++
++
++/*
++ *  WMI_RSSI_THRESHOLD_PARAMS_CMDID
++ *  Setting the polltime to 0 would disable polling.
++ *  Threshold values are in the ascending order, and should agree to:
++ *  (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
++ *      < highThreshold_upperVal)
++ */
++
++typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
++    A_UINT32    pollTime;               /* Polling time as a factor of LI */
++    A_INT16     thresholdAbove1_Val;          /* lowest of upper */
++    A_INT16     thresholdAbove2_Val;
++    A_INT16     thresholdAbove3_Val;
++    A_INT16     thresholdAbove4_Val;
++    A_INT16     thresholdAbove5_Val;
++    A_INT16     thresholdAbove6_Val;          /* highest of upper */
++    A_INT16     thresholdBelow1_Val;         /* lowest of bellow */
++    A_INT16     thresholdBelow2_Val;
++    A_INT16     thresholdBelow3_Val;
++    A_INT16     thresholdBelow4_Val;
++    A_INT16     thresholdBelow5_Val;
++    A_INT16     thresholdBelow6_Val;         /* highest of bellow */
++    A_UINT8     weight;                  /* "alpha" */
++    A_UINT8     reserved[3];
++} POSTPACK  WMI_RSSI_THRESHOLD_PARAMS_CMD;
++
++/*
++ *  WMI_SNR_THRESHOLD_PARAMS_CMDID
++ *  Setting the polltime to 0 would disable polling.
++ */
++
++typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
++    A_UINT32    pollTime;               /* Polling time as a factor of LI */
++    A_UINT8     weight;                  /* "alpha" */
++    A_UINT8     thresholdAbove1_Val;      /* lowest of uppper*/
++    A_UINT8     thresholdAbove2_Val;
++    A_UINT8     thresholdAbove3_Val;
++    A_UINT8     thresholdAbove4_Val;      /* highest of upper */
++    A_UINT8     thresholdBelow1_Val;     /* lowest of bellow */
++    A_UINT8     thresholdBelow2_Val;
++    A_UINT8     thresholdBelow3_Val;
++    A_UINT8     thresholdBelow4_Val;     /* highest of bellow */
++    A_UINT8     reserved[3];
++} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
++
++/*
++ *  WMI_LQ_THRESHOLD_PARAMS_CMDID
++ */
++typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
++    A_UINT8     enable;
++    A_UINT8     thresholdAbove1_Val;
++    A_UINT8     thresholdAbove2_Val;
++    A_UINT8     thresholdAbove3_Val;
++    A_UINT8     thresholdAbove4_Val;
++    A_UINT8     thresholdBelow1_Val;
++    A_UINT8     thresholdBelow2_Val;
++    A_UINT8     thresholdBelow3_Val;
++    A_UINT8     thresholdBelow4_Val;
++    A_UINT8     reserved[3];
++} POSTPACK  WMI_LQ_THRESHOLD_PARAMS_CMD;
++
++typedef enum {
++    WMI_LPREAMBLE_DISABLED = 0,
++    WMI_LPREAMBLE_ENABLED
++} WMI_LPREAMBLE_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8     status;
++}POSTPACK WMI_SET_LPREAMBLE_CMD;
++
++typedef PREPACK struct {
++    A_UINT16    threshold;
++}POSTPACK WMI_SET_RTS_CMD;
++
++/*
++ *  WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
++ *  Sets the error reporting event bitmask in target. Target clears it
++ *  upon an error. Subsequent errors are counted, but not reported
++ *  via event, unless the bitmask is set again.
++ */
++typedef PREPACK struct {
++    A_UINT32    bitmask;
++} POSTPACK  WMI_TARGET_ERROR_REPORT_BITMASK;
++
++/*
++ * WMI_SET_TX_PWR_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     dbM;                  /* in dbM units */
++} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
++
++/*
++ * WMI_SET_ASSOC_INFO_CMDID
++ *
++ * A maximum of 2 private IEs can be sent in the [Re]Assoc request.
++ * A 3rd one, the CCX version IE can also be set from the host.
++ */
++#define WMI_MAX_ASSOC_INFO_TYPE    2
++#define WMI_CCX_VER_IE             2 /* ieType to set CCX Version IE */
++
++#define WMI_MAX_ASSOC_INFO_LEN     240
++
++typedef PREPACK struct {
++    A_UINT8     ieType;
++    A_UINT8     bufferSize;
++    A_UINT8     assocInfo[1];       /* up to WMI_MAX_ASSOC_INFO_LEN */
++} POSTPACK WMI_SET_ASSOC_INFO_CMD;
++
++
++/*
++ * WMI_GET_TX_PWR_CMDID does not take any parameters
++ */
++
++/*
++ * WMI_ADD_BAD_AP_CMDID
++ */
++#define WMI_MAX_BAD_AP_INDEX      1
++
++typedef PREPACK struct {
++    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_ADD_BAD_AP_CMD;
++
++/*
++ * WMI_DELETE_BAD_AP_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
++} POSTPACK WMI_DELETE_BAD_AP_CMD;
++
++/*
++ * WMI_SET_ACCESS_PARAMS_CMDID
++ */
++#define WMI_DEFAULT_TXOP_ACPARAM    0       /* implies one MSDU */
++#define WMI_DEFAULT_ECWMIN_ACPARAM  4       /* corresponds to CWmin of 15 */
++#define WMI_DEFAULT_ECWMAX_ACPARAM  10      /* corresponds to CWmax of 1023 */
++#define WMI_MAX_CW_ACPARAM          15      /* maximum eCWmin or eCWmax */
++#define WMI_DEFAULT_AIFSN_ACPARAM   2
++#define WMI_MAX_AIFSN_ACPARAM       15
++typedef PREPACK struct {
++    A_UINT16 txop;                      /* in units of 32 usec */
++    A_UINT8  eCWmin;
++    A_UINT8  eCWmax;
++    A_UINT8  aifsn;
++} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
++
++
++/*
++ * WMI_SET_RETRY_LIMITS_CMDID
++ *
++ * This command is used to customize the number of retries the
++ * wlan device will perform on a given frame.
++ */
++#define WMI_MIN_RETRIES 2
++#define WMI_MAX_RETRIES 13
++typedef enum {
++    MGMT_FRAMETYPE    = 0,
++    CONTROL_FRAMETYPE = 1,
++    DATA_FRAMETYPE    = 2
++} WMI_FRAMETYPE;
++
++typedef PREPACK struct {
++    A_UINT8 frameType;                      /* WMI_FRAMETYPE */
++    A_UINT8 trafficClass;                   /* applies only to DATA_FRAMETYPE */
++    A_UINT8 maxRetries;
++    A_UINT8 enableNotify;
++} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
++
++/*
++ * WMI_SET_ROAM_CTRL_CMDID
++ *
++ * This command is used to influence the Roaming behaviour
++ * Set the host biases of the BSSs before setting the roam mode as bias
++ * based.
++ */
++
++/*
++ * Different types of Roam Control
++ */
++
++typedef enum {
++        WMI_FORCE_ROAM          = 1,      /* Roam to the specified BSSID */
++        WMI_SET_ROAM_MODE       = 2,      /* default ,progd bias, no roam */
++        WMI_SET_HOST_BIAS       = 3,     /* Set the Host Bias */
++        WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
++} WMI_ROAM_CTRL_TYPE;
++
++#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
++#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
++
++/*
++ * ROAM MODES
++ */
++
++typedef enum {
++        WMI_DEFAULT_ROAM_MODE   = 1,  /* RSSI based ROAM */
++        WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
++        WMI_LOCK_BSS_MODE  = 3  /* Lock to the Current BSS - no Roam */
++} WMI_ROAM_MODE;
++
++/*
++ * BSS HOST BIAS INFO
++ */
++
++typedef PREPACK struct {
++        A_UINT8 bssid[ATH_MAC_LEN];
++        A_INT8  bias;
++} POSTPACK WMI_BSS_BIAS;
++
++typedef PREPACK struct {
++        A_UINT8 numBss;
++        WMI_BSS_BIAS bssBias[1];
++} POSTPACK WMI_BSS_BIAS_INFO;
++
++typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
++        A_UINT16 lowrssi_scan_period;
++        A_INT16  lowrssi_scan_threshold;
++        A_INT16  lowrssi_roam_threshold;
++        A_UINT8  roam_rssi_floor;
++        A_UINT8  reserved[1];              /* For alignment */
++} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
++
++typedef PREPACK struct {
++    PREPACK union {
++        A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
++        A_UINT8 roamMode;           /* WMI_SET_ROAM_MODE  */
++        WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
++        WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
++    } POSTPACK info;
++    A_UINT8   roamCtrlType ;
++} POSTPACK WMI_SET_ROAM_CTRL_CMD;
++
++/*
++ * WMI_ENABLE_RM_CMDID
++ */
++typedef PREPACK struct {
++        A_BOOL enable_radio_measurements;
++} POSTPACK WMI_ENABLE_RM_CMD;
++
++/*
++ * WMI_SET_MAX_OFFHOME_DURATION_CMDID
++ */
++typedef PREPACK struct {
++        A_UINT8 max_offhome_duration;
++} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
++
++typedef PREPACK struct {
++    A_UINT32 frequency;
++    A_UINT8  threshold;
++} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
++
++typedef enum {
++    BT_STREAM_UNDEF = 0,
++    BT_STREAM_SCO,             /* SCO stream */
++    BT_STREAM_A2DP,            /* A2DP stream */
++    BT_STREAM_MAX
++} BT_STREAM_TYPE;
++
++typedef enum {
++    BT_PARAM_SCO = 1,         /* SCO stream parameters */
++    BT_PARAM_A2DP,            /* A2DP stream parameters */
++    BT_PARAM_MISC,            /* miscellaneous parameters */
++    BT_PARAM_REGS,            /* co-existence register parameters */
++    BT_PARAM_MAX
++} BT_PARAM_TYPE;
++
++typedef enum {
++    BT_STATUS_UNDEF = 0,
++    BT_STATUS_START,
++    BT_STATUS_STOP,
++    BT_STATUS_RESUME,
++    BT_STATUS_SUSPEND,
++    BT_STATUS_MAX
++} BT_STREAM_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8 streamType;
++    A_UINT8 status;
++} POSTPACK WMI_SET_BT_STATUS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 noSCOPkts;
++    A_UINT8 pspollTimeout;
++    A_UINT8 stompbt;
++} POSTPACK BT_PARAMS_SCO;
++
++typedef PREPACK struct {
++    A_UINT32 period;
++    A_UINT32 dutycycle;
++    A_UINT8  stompbt;
++} POSTPACK BT_PARAMS_A2DP;
++
++typedef PREPACK struct {
++    A_UINT32 mode;
++    A_UINT32 scoWghts;
++    A_UINT32 a2dpWghts;
++    A_UINT32 genWghts;
++    A_UINT32 mode2;
++    A_UINT8  setVal;
++} POSTPACK BT_COEX_REGS;
++
++typedef enum {
++    WLAN_PROTECT_POLICY = 1,
++    WLAN_COEX_CTRL_FLAGS
++} BT_PARAMS_MISC_TYPE;
++
++typedef enum {
++    WLAN_PROTECT_PER_STREAM = 0x01,   /* default */
++    WLAN_PROTECT_ANY_TX = 0x02
++} WLAN_PROTECT_FLAGS;
++
++
++#define WLAN_DISABLE_COEX_IN_DISCONNECT   0x01 /* default */
++#define WLAN_KEEP_COEX_IN_DISCONNECT      0x02
++#define WLAN_STOMPBT_IN_DISCONNECT        0x04
++
++#define WLAN_DISABLE_COEX_IN_ROAM         0x10 /* default */
++#define WLAN_KEEP_COEX_IN_ROAM            0x20
++#define WLAN_STOMPBT_IN_ROAM              0x40
++
++#define WLAN_DISABLE_COEX_IN_SCAN        0x100 /* default */
++#define WLAN_KEEP_COEX_IN_SCAN           0x200
++#define WLAN_STOMPBT_IN_SCAN             0x400
++
++#define WLAN_DISABLE_COEX_BT_OFF        0x1000 /* default */
++#define WLAN_KEEP_COEX_BT_OFF           0x2000
++#define WLAN_STOMPBT_BT_OFF             0x4000
++
++typedef PREPACK struct {
++    A_UINT32 period;
++    A_UINT32 dutycycle;
++    A_UINT8  stompbt;
++    A_UINT8  policy;
++} POSTPACK WLAN_PROTECT_POLICY_TYPE;
++
++typedef PREPACK struct {
++    PREPACK union {
++        WLAN_PROTECT_POLICY_TYPE protectParams;
++        A_UINT16 wlanCtrlFlags;
++    } POSTPACK info;
++    A_UINT8 paramType;
++} POSTPACK BT_PARAMS_MISC;
++
++typedef PREPACK struct {
++    PREPACK union {
++        BT_PARAMS_SCO scoParams;
++        BT_PARAMS_A2DP a2dpParams;
++        BT_PARAMS_MISC miscParams;
++        BT_COEX_REGS regs;
++    } POSTPACK info;
++    A_UINT8 paramType;
++} POSTPACK WMI_SET_BT_PARAMS_CMD;
++
++/*
++ * Command Replies
++ */
++
++/*
++ * WMI_GET_CHANNEL_LIST_CMDID reply
++ */
++typedef PREPACK struct {
++    A_UINT8     reserved1;
++    A_UINT8     numChannels;            /* number of channels in reply */
++    A_UINT16    channelList[1];         /* channel in Mhz */
++} POSTPACK WMI_CHANNEL_LIST_REPLY;
++
++typedef enum {
++    A_SUCCEEDED = A_OK,
++    A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
++    A_SUCCEEDED_MODIFY_STREAM=251,
++    A_FAILED_INVALID_STREAM = 252,
++    A_FAILED_MAX_THINSTREAMS = 253,
++    A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
++} PSTREAM_REPLY_STATUS;
++
++/*
++ * List of Events (target to host)
++ */
++typedef enum {
++    WMI_READY_EVENTID           = 0x1001,
++    WMI_CONNECT_EVENTID,
++    WMI_DISCONNECT_EVENTID,
++    WMI_BSSINFO_EVENTID,
++    WMI_CMDERROR_EVENTID,
++    WMI_REGDOMAIN_EVENTID,
++    WMI_PSTREAM_TIMEOUT_EVENTID,
++    WMI_NEIGHBOR_REPORT_EVENTID,
++    WMI_TKIP_MICERR_EVENTID,
++    WMI_SCAN_COMPLETE_EVENTID,
++    WMI_REPORT_STATISTICS_EVENTID,
++    WMI_RSSI_THRESHOLD_EVENTID,
++    WMI_ERROR_REPORT_EVENTID,
++    WMI_OPT_RX_FRAME_EVENTID,
++    WMI_REPORT_ROAM_TBL_EVENTID,
++    WMI_EXTENSION_EVENTID,
++    WMI_CAC_EVENTID,
++    WMI_SNR_THRESHOLD_EVENTID,
++    WMI_LQ_THRESHOLD_EVENTID,
++    WMI_TX_RETRY_ERR_EVENTID,
++    WMI_REPORT_ROAM_DATA_EVENTID,
++    WMI_TEST_EVENTID,
++    WMI_APLIST_EVENTID,
++    WMI_GET_WOW_LIST_EVENTID,
++    WMI_GET_PMKID_LIST_EVENTID
++} WMI_EVENT_ID;
++
++typedef enum {
++    WMI_11A_CAPABILITY   = 1,
++    WMI_11G_CAPABILITY   = 2,
++    WMI_11AG_CAPABILITY  = 3,
++} WMI_PHY_CAPABILITY;
++
++typedef PREPACK struct {
++    A_UINT8     macaddr[ATH_MAC_LEN];
++    A_UINT8     phyCapability;              /* WMI_PHY_CAPABILITY */
++} POSTPACK WMI_READY_EVENT;
++
++/*
++ * Connect Event
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT16    listenInterval;
++    A_UINT16    beaconInterval;
++    A_UINT32    networkType;
++    A_UINT8     beaconIeLen;
++    A_UINT8     assocReqLen;
++    A_UINT8     assocRespLen;
++    A_UINT8     assocInfo[1];
++} POSTPACK WMI_CONNECT_EVENT;
++
++/*
++ * Disconnect Event
++ */
++typedef enum {
++    NO_NETWORK_AVAIL   = 0x01,
++    LOST_LINK          = 0x02,     /* bmiss */
++    DISCONNECT_CMD     = 0x03,
++    BSS_DISCONNECTED   = 0x04,
++    AUTH_FAILED        = 0x05,
++    ASSOC_FAILED       = 0x06,
++    NO_RESOURCES_AVAIL = 0x07,
++    CSERV_DISCONNECT   = 0x08,
++    INVALID_PROFILE    = 0x0a,
++    DOT11H_CHANNEL_SWITCH = 0x0b,
++} WMI_DISCONNECT_REASON;
++
++typedef PREPACK struct {
++    A_UINT16    protocolReasonStatus;  /* reason code, see 802.11 spec. */
++    A_UINT8     bssid[ATH_MAC_LEN];    /* set if known */
++    A_UINT8     disconnectReason ;      /* see WMI_DISCONNECT_REASON */
++    A_UINT8     assocRespLen;
++    A_UINT8     assocInfo[1];
++} POSTPACK WMI_DISCONNECT_EVENT;
++
++/*
++ * BSS Info Event.
++ * Mechanism used to inform host of the presence and characteristic of
++ * wireless networks present.  Consists of bss info header followed by
++ * the beacon or probe-response frame body.  The 802.11 header is not included.
++ */
++typedef enum {
++    BEACON_FTYPE = 0x1,
++    PROBERESP_FTYPE,
++    ACTION_MGMT_FTYPE,
++} WMI_BI_FTYPE;
++
++enum {
++    BSS_ELEMID_CHANSWITCH = 0x01,
++    BSS_ELEMID_ATHEROS = 0x02,
++};
++
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     frameType;          /* see WMI_BI_FTYPE */
++    A_UINT8     snr;
++    A_INT16     rssi;
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT32    ieMask;
++} POSTPACK WMI_BSS_INFO_HDR;
++
++/*
++ * Command Error Event
++ */
++typedef enum {
++    INVALID_PARAM  = 0x01,
++    ILLEGAL_STATE  = 0x02,
++    INTERNAL_ERROR = 0x03,
++} WMI_ERROR_CODE;
++
++typedef PREPACK struct {
++    A_UINT16    commandId;
++    A_UINT8     errorCode;
++} POSTPACK WMI_CMD_ERROR_EVENT;
++
++/*
++ * New Regulatory Domain Event
++ */
++typedef PREPACK struct {
++    A_UINT32    regDomain;
++} POSTPACK WMI_REG_DOMAIN_EVENT;
++
++typedef PREPACK struct {
++    A_UINT8     trafficClass;
++} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
++
++/*
++ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
++ * the host of BSS's it has found that matches the current profile.
++ * It can be used by the host to cache PMKs and/to initiate pre-authentication
++ * if the BSS supports it.  The first bssid is always the current associated
++ * BSS.
++ * The bssid and bssFlags information repeats according to the number
++ * or APs reported.
++ */
++typedef enum {
++    WMI_DEFAULT_BSS_FLAGS   = 0x00,
++    WMI_PREAUTH_CAPABLE_BSS = 0x01,
++    WMI_PMKID_VALID_BSS     = 0x02,
++} WMI_BSS_FLAGS;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     bssFlags;            /* see WMI_BSS_FLAGS */
++} POSTPACK WMI_NEIGHBOR_INFO;
++
++typedef PREPACK struct {
++    A_INT8      numberOfAps;
++    WMI_NEIGHBOR_INFO neighbor[1];
++} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
++
++/*
++ * TKIP MIC Error Event
++ */
++typedef PREPACK struct {
++    A_UINT8 keyid;
++    A_UINT8 ismcast;
++} POSTPACK WMI_TKIP_MICERR_EVENT;
++
++/*
++ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
++ */
++typedef PREPACK struct {
++    A_STATUS status;
++} POSTPACK WMI_SCAN_COMPLETE_EVENT;
++
++#define MAX_OPT_DATA_LEN 1400
++
++/*
++ * WMI_SET_ADHOC_BSSID_CMDID
++ */
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
++
++/*
++ * WMI_SET_OPT_MODE_CMDID
++ */
++typedef enum {
++    SPECIAL_OFF,
++    SPECIAL_ON,
++} OPT_MODE_TYPE;
++
++typedef PREPACK struct {
++    A_UINT8     optMode;
++} POSTPACK WMI_SET_OPT_MODE_CMD;
++
++/*
++ * WMI_TX_OPT_FRAME_CMDID
++ */
++typedef enum {
++    OPT_PROBE_REQ   = 0x01,
++    OPT_PROBE_RESP  = 0x02,
++    OPT_CPPP_START  = 0x03,
++    OPT_CPPP_STOP   = 0x04,
++} WMI_OPT_FTYPE;
++
++typedef PREPACK struct {
++    A_UINT16    optIEDataLen;
++    A_UINT8     frmType;
++    A_UINT8     dstAddr[ATH_MAC_LEN];
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT8     reserved;               /* For alignment */
++    A_UINT8     optIEData[1];
++} POSTPACK WMI_OPT_TX_FRAME_CMD;
++
++/*
++ * Special frame receive Event.
++ * Mechanism used to inform host of the receiption of the special frames.
++ * Consists of special frame info header followed by special frame body.
++ * The 802.11 header is not included.
++ */
++typedef PREPACK struct {
++    A_UINT16    channel;
++    A_UINT8     frameType;          /* see WMI_OPT_FTYPE */
++    A_INT8      snr;
++    A_UINT8     srcAddr[ATH_MAC_LEN];
++    A_UINT8     bssid[ATH_MAC_LEN];
++} POSTPACK WMI_OPT_RX_INFO_HDR;
++
++/*
++ * Reporting statistics.
++ */
++typedef PREPACK struct {
++    A_UINT32   tx_packets;
++    A_UINT32   tx_bytes;
++    A_UINT32   tx_unicast_pkts;
++    A_UINT32   tx_unicast_bytes;
++    A_UINT32   tx_multicast_pkts;
++    A_UINT32   tx_multicast_bytes;
++    A_UINT32   tx_broadcast_pkts;
++    A_UINT32   tx_broadcast_bytes;
++    A_UINT32   tx_rts_success_cnt;
++    A_UINT32   tx_packet_per_ac[4];
++    A_UINT32   tx_errors_per_ac[4];
++
++    A_UINT32   tx_errors;
++    A_UINT32   tx_failed_cnt;
++    A_UINT32   tx_retry_cnt;
++    A_UINT32   tx_rts_fail_cnt;
++    A_INT32    tx_unicast_rate;
++}POSTPACK tx_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   rx_packets;
++    A_UINT32   rx_bytes;
++    A_UINT32   rx_unicast_pkts;
++    A_UINT32   rx_unicast_bytes;
++    A_UINT32   rx_multicast_pkts;
++    A_UINT32   rx_multicast_bytes;
++    A_UINT32   rx_broadcast_pkts;
++    A_UINT32   rx_broadcast_bytes;
++    A_UINT32   rx_fragment_pkt;
++
++    A_UINT32   rx_errors;
++    A_UINT32   rx_crcerr;
++    A_UINT32   rx_key_cache_miss;
++    A_UINT32   rx_decrypt_err;
++    A_UINT32   rx_duplicate_frames;
++    A_INT32    rx_unicast_rate;
++}POSTPACK rx_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   tkip_local_mic_failure;
++    A_UINT32   tkip_counter_measures_invoked;
++    A_UINT32   tkip_replays;
++    A_UINT32   tkip_format_errors;
++    A_UINT32   ccmp_format_errors;
++    A_UINT32   ccmp_replays;
++}POSTPACK tkip_ccmp_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32   power_save_failure_cnt;
++}POSTPACK pm_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32    cs_bmiss_cnt;
++    A_UINT32    cs_lowRssi_cnt;
++    A_UINT16    cs_connect_cnt;
++    A_UINT16    cs_disconnect_cnt;
++    A_INT16     cs_aveBeacon_rssi;
++    A_UINT16    cs_roam_count;
++    A_UINT16    cs_rssi;
++    A_UINT8     cs_snr;
++    A_UINT8     cs_aveBeacon_snr;
++    A_UINT8     cs_lastRoam_msec;
++} POSTPACK cserv_stats_t;
++
++typedef PREPACK struct {
++    tx_stats_t          tx_stats;
++    rx_stats_t          rx_stats;
++    tkip_ccmp_stats_t   tkipCcmpStats;
++}POSTPACK wlan_net_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32    wow_num_pkts_dropped;
++    A_UINT16    wow_num_events_discarded;
++    A_UINT8     wow_num_host_pkt_wakeups;
++    A_UINT8     wow_num_host_event_wakeups;
++} POSTPACK wlan_wow_stats_t;
++
++typedef PREPACK struct {
++    A_UINT32            lqVal;
++    A_INT32             noise_floor_calibation;
++    pm_stats_t          pmStats;
++    wlan_net_stats_t    txrxStats;
++    wlan_wow_stats_t    wowStats;
++    cserv_stats_t       cservStats;
++} POSTPACK WMI_TARGET_STATS;
++
++/*
++ * WMI_RSSI_THRESHOLD_EVENTID.
++ * Indicate the RSSI events to host. Events are indicated when we breach a
++ * thresold value.
++ */
++typedef enum{
++    WMI_RSSI_THRESHOLD1_ABOVE = 0,
++    WMI_RSSI_THRESHOLD2_ABOVE,
++    WMI_RSSI_THRESHOLD3_ABOVE,
++    WMI_RSSI_THRESHOLD4_ABOVE,
++    WMI_RSSI_THRESHOLD5_ABOVE,
++    WMI_RSSI_THRESHOLD6_ABOVE,
++    WMI_RSSI_THRESHOLD1_BELOW,
++    WMI_RSSI_THRESHOLD2_BELOW,
++    WMI_RSSI_THRESHOLD3_BELOW,
++    WMI_RSSI_THRESHOLD4_BELOW,
++    WMI_RSSI_THRESHOLD5_BELOW,
++    WMI_RSSI_THRESHOLD6_BELOW
++}WMI_RSSI_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_INT16 rssi;
++    A_UINT8 range;
++}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
++
++/*
++ *  WMI_ERROR_REPORT_EVENTID
++ */
++typedef enum{
++    WMI_TARGET_PM_ERR_FAIL      = 0x00000001,
++    WMI_TARGET_KEY_NOT_FOUND    = 0x00000002,
++    WMI_TARGET_DECRYPTION_ERR   = 0x00000004,
++    WMI_TARGET_BMISS            = 0x00000008,
++    WMI_PSDISABLE_NODE_JOIN     = 0x00000010,
++    WMI_TARGET_COM_ERR          = 0x00000020,
++    WMI_TARGET_FATAL_ERR        = 0x00000040
++} WMI_TARGET_ERROR_VAL;
++
++typedef PREPACK struct {
++    A_UINT32 errorVal;
++}POSTPACK  WMI_TARGET_ERROR_REPORT_EVENT;
++
++typedef PREPACK struct {
++    A_UINT8 retrys;
++}POSTPACK  WMI_TX_RETRY_ERR_EVENT;
++
++typedef enum{
++    WMI_SNR_THRESHOLD1_ABOVE = 1,
++    WMI_SNR_THRESHOLD1_BELOW,
++    WMI_SNR_THRESHOLD2_ABOVE,
++    WMI_SNR_THRESHOLD2_BELOW,
++    WMI_SNR_THRESHOLD3_ABOVE,
++    WMI_SNR_THRESHOLD3_BELOW,
++    WMI_SNR_THRESHOLD4_ABOVE,
++    WMI_SNR_THRESHOLD4_BELOW
++} WMI_SNR_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_UINT8 range;  /* WMI_SNR_THRESHOLD_VAL */
++    A_UINT8 snr;
++}POSTPACK  WMI_SNR_THRESHOLD_EVENT;
++
++typedef enum{
++    WMI_LQ_THRESHOLD1_ABOVE = 1,
++    WMI_LQ_THRESHOLD1_BELOW,
++    WMI_LQ_THRESHOLD2_ABOVE,
++    WMI_LQ_THRESHOLD2_BELOW,
++    WMI_LQ_THRESHOLD3_ABOVE,
++    WMI_LQ_THRESHOLD3_BELOW,
++    WMI_LQ_THRESHOLD4_ABOVE,
++    WMI_LQ_THRESHOLD4_BELOW
++} WMI_LQ_THRESHOLD_VAL;
++
++typedef PREPACK struct {
++    A_INT32 lq;
++    A_UINT8 range;  /* WMI_LQ_THRESHOLD_VAL */
++}POSTPACK  WMI_LQ_THRESHOLD_EVENT;
++/*
++ * WMI_REPORT_ROAM_TBL_EVENTID
++ */
++#define MAX_ROAM_TBL_CAND   5
++
++typedef PREPACK struct {
++    A_INT32 roam_util;
++    A_UINT8 bssid[ATH_MAC_LEN];
++    A_INT8  rssi;
++    A_INT8  rssidt;
++    A_INT8  last_rssi;
++    A_INT8  util;
++    A_INT8  bias;
++    A_UINT8 reserved; /* For alignment */
++} POSTPACK WMI_BSS_ROAM_INFO;
++
++
++typedef PREPACK struct {
++    A_UINT16  roamMode;
++    A_UINT16  numEntries;
++    WMI_BSS_ROAM_INFO bssRoamInfo[1];
++} POSTPACK WMI_TARGET_ROAM_TBL;
++
++/*
++ *  WMI_CAC_EVENTID
++ */
++typedef enum {
++    CAC_INDICATION_ADMISSION = 0x00,
++    CAC_INDICATION_ADMISSION_RESP = 0x01,
++    CAC_INDICATION_DELETE = 0x02,
++    CAC_INDICATION_NO_RESP = 0x03,
++}CAC_INDICATION;
++
++#define WMM_TSPEC_IE_LEN   63
++
++typedef PREPACK struct {
++    A_UINT8 ac;
++    A_UINT8 cac_indication;
++    A_UINT8 statusCode;
++    A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
++}POSTPACK  WMI_CAC_EVENT;
++
++/*
++ * WMI_APLIST_EVENTID
++ */
++
++typedef enum {
++    APLIST_VER1 = 1,
++} APLIST_VER;
++
++typedef PREPACK struct {
++    A_UINT8     bssid[ATH_MAC_LEN];
++    A_UINT16    channel;
++} POSTPACK  WMI_AP_INFO_V1;
++
++typedef PREPACK union {
++    WMI_AP_INFO_V1  apInfoV1;
++} POSTPACK WMI_AP_INFO;
++
++typedef PREPACK struct {
++    A_UINT8     apListVer;
++    A_UINT8     numAP;
++    WMI_AP_INFO apList[1];
++} POSTPACK WMI_APLIST_EVENT;
++
++/*
++ * developer commands
++ */
++
++/*
++ * WMI_SET_BITRATE_CMDID
++ *
++ * Get bit rate cmd uses same definition as set bit rate cmd
++ */
++typedef enum {
++    RATE_AUTO   = -1,
++    RATE_1Mb    = 0,
++    RATE_2Mb    = 1,
++    RATE_5_5Mb  = 2,
++    RATE_11Mb   = 3,
++    RATE_6Mb    = 4,
++    RATE_9Mb    = 5,
++    RATE_12Mb   = 6,
++    RATE_18Mb   = 7,
++    RATE_24Mb   = 8,
++    RATE_36Mb   = 9,
++    RATE_48Mb   = 10,
++    RATE_54Mb   = 11,
++} WMI_BIT_RATE;
++
++typedef PREPACK struct {
++    A_INT8      rateIndex;          /* see WMI_BIT_RATE */
++} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY;
++
++/*
++ * WMI_SET_FIXRATES_CMDID
++ *
++ * Get fix rates cmd uses same definition as set fix rates cmd
++ */
++typedef enum {
++    FIX_RATE_1Mb    = 0x1,
++    FIX_RATE_2Mb    = 0x2,
++    FIX_RATE_5_5Mb  = 0x4,
++    FIX_RATE_11Mb   = 0x8,
++    FIX_RATE_6Mb    = 0x10,
++    FIX_RATE_9Mb    = 0x20,
++    FIX_RATE_12Mb   = 0x40,
++    FIX_RATE_18Mb   = 0x80,
++    FIX_RATE_24Mb   = 0x100,
++    FIX_RATE_36Mb   = 0x200,
++    FIX_RATE_48Mb   = 0x400,
++    FIX_RATE_54Mb   = 0x800,
++} WMI_FIX_RATES_MASK;
++
++typedef PREPACK struct {
++    A_UINT16      fixRateMask;          /* see WMI_BIT_RATE */
++} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
++
++/*
++ * WMI_SET_RECONNECT_AUTH_MODE_CMDID
++ *
++ * Set authentication mode
++ */
++typedef enum {
++    RECONN_DO_AUTH = 0x00,
++    RECONN_NOT_AUTH = 0x01
++} WMI_AUTH_MODE;
++
++typedef PREPACK struct {
++    A_UINT8 mode;
++} POSTPACK WMI_SET_AUTH_MODE_CMD;
++
++/*
++ * WMI_SET_REASSOC_MODE_CMDID
++ *
++ * Set authentication mode
++ */
++typedef enum {
++    REASSOC_DO_DISASSOC = 0x00,
++    REASSOC_DONOT_DISASSOC = 0x01
++} WMI_REASSOC_MODE;
++
++typedef PREPACK struct {
++    A_UINT8 mode;
++}POSTPACK WMI_SET_REASSOC_MODE_CMD;
++
++typedef enum {
++    ROAM_DATA_TIME = 1,            /* Get The Roam Time Data */
++} ROAM_DATA_TYPE;
++
++typedef PREPACK struct {
++    A_UINT32        disassoc_time;
++    A_UINT32        no_txrx_time;
++    A_UINT32        assoc_time;
++    A_UINT32        allow_txrx_time;
++    A_UINT32        last_data_txrx_time;
++    A_UINT32        first_data_txrx_time;
++    A_UINT8         disassoc_bssid[ATH_MAC_LEN];
++    A_INT8          disassoc_bss_rssi;
++    A_UINT8         assoc_bssid[ATH_MAC_LEN];
++    A_INT8          assoc_bss_rssi;
++} POSTPACK WMI_TARGET_ROAM_TIME;
++
++typedef PREPACK struct {
++    PREPACK union {
++        WMI_TARGET_ROAM_TIME roamTime;
++    } POSTPACK u;
++    A_UINT8 roamDataType ;
++} POSTPACK WMI_TARGET_ROAM_DATA;
++
++typedef enum {
++    WMI_WMM_DISABLED = 0,
++    WMI_WMM_ENABLED
++} WMI_WMM_STATUS;
++
++typedef PREPACK struct {
++    A_UINT8    status;
++}POSTPACK WMI_SET_WMM_CMD;
++
++typedef enum {
++    WMI_TXOP_DISABLED = 0,
++    WMI_TXOP_ENABLED
++} WMI_TXOP_CFG;
++
++typedef PREPACK struct {
++    A_UINT8    txopEnable;
++}POSTPACK WMI_SET_WMM_TXOP_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 keepaliveInterval;
++} POSTPACK WMI_SET_KEEPALIVE_CMD;
++
++typedef PREPACK struct {
++    A_BOOL configured;
++    A_UINT8 keepaliveInterval;
++} POSTPACK WMI_GET_KEEPALIVE_CMD;
++
++/*
++ * Add Application specified IE to a management frame
++ */
++#define WMI_MAX_IE_LEN  78
++
++typedef PREPACK struct {
++    A_UINT8 mgmtFrmType;  /* one of WMI_MGMT_FRAME_TYPE */
++    A_UINT8 ieLen;    /* Length  of the IE that should be added to the MGMT frame */
++    A_UINT8 ieInfo[1];
++} POSTPACK WMI_SET_APPIE_CMD;
++
++/*
++ * Notify the WSC registration status to the target
++ */
++#define WSC_REG_ACTIVE     1
++#define WSC_REG_INACTIVE   0
++/* Generic Hal Interface for setting hal paramters. */
++/* Add new Set HAL Param cmdIds here for newer params */
++typedef enum {
++   WHAL_SETCABTO_CMDID = 1,
++}WHAL_CMDID;
++
++typedef PREPACK struct {
++    A_UINT8 cabTimeOut;
++} POSTPACK WHAL_SETCABTO_PARAM;
++
++typedef PREPACK struct {
++    A_UINT8  whalCmdId;
++    A_UINT8 data[1];
++} POSTPACK WHAL_PARAMCMD;
++
++
++#define WOW_MAX_FILTER_LISTS 1 /*4*/
++#define WOW_MAX_FILTERS_PER_LIST 4
++#define WOW_PATTERN_SIZE 64
++#define WOW_MASK_SIZE 64
++
++typedef PREPACK struct {
++    A_UINT8 wow_valid_filter;
++    A_UINT8 wow_filter_id;
++    A_UINT8 wow_filter_size;
++    A_UINT8 wow_filter_offset;
++    A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
++    A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
++} POSTPACK WOW_FILTER;
++
++
++typedef PREPACK struct {
++    A_UINT8 wow_valid_list;
++    A_UINT8 wow_list_id;
++    A_UINT8 wow_num_filters;
++    A_UINT8 wow_total_list_size;
++    WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
++} POSTPACK WOW_FILTER_LIST;
++
++typedef PREPACK struct {
++    A_BOOL awake;
++    A_BOOL asleep;
++} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
++
++typedef PREPACK struct {
++    A_BOOL enable_wow;
++} POSTPACK WMI_SET_WOW_MODE_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 filter_list_id;
++} POSTPACK WMI_GET_WOW_LIST_CMD;
++
++/*
++ * WMI_GET_WOW_LIST_CMD reply
++ */
++typedef PREPACK struct {
++    A_UINT8     num_filters;     /* number of patterns in reply */
++    A_UINT8     this_filter_num; /*  this is filter # x of total num_filters */
++    A_UINT8     wow_mode;
++    A_UINT8     host_mode;
++    WOW_FILTER  wow_filters[1];
++} POSTPACK WMI_GET_WOW_LIST_REPLY;
++
++typedef PREPACK struct {
++    A_UINT8 filter_list_id;
++    A_UINT8 filter_size;
++    A_UINT8 filter_offset;
++    A_UINT8 filter[1];
++} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
++
++typedef PREPACK struct {
++    A_UINT16 filter_list_id;
++    A_UINT16 filter_id;
++} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 macaddr[ATH_MAC_LEN];
++} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
++
++/*
++ * WMI_SET_AKMP_PARAMS_CMD
++ */
++
++#define WMI_AKMP_MULTI_PMKID_EN   0x000001
++
++typedef PREPACK struct {
++    A_UINT32    akmpInfo;
++} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
++
++typedef PREPACK struct {
++    A_UINT8 pmkid[WMI_PMKID_LEN];
++} POSTPACK WMI_PMKID;
++
++/*
++ * WMI_SET_PMKID_LIST_CMD
++ */
++#define WMI_MAX_PMKID_CACHE   8
++
++typedef PREPACK struct {
++    A_UINT32    numPMKID;
++    WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
++} POSTPACK WMI_SET_PMKID_LIST_CMD;
++
++/*
++ * WMI_GET_PMKID_LIST_CMD  Reply
++ * Following the Number of PMKIDs is the list of PMKIDs
++ */
++typedef PREPACK struct {
++    A_UINT32    numPMKID;
++    WMI_PMKID   pmkidList[1];
++} POSTPACK WMI_PMKID_LIST_REPLY;
++
++/* index used for priority streams */
++typedef enum {
++    WMI_NOT_MAPPED  = -1,
++    WMI_CONTROL_PRI = 0,
++    WMI_BEST_EFFORT_PRI = 1,
++    WMI_LOW_PRI = 2,
++    WMI_HIGH_PRI = 3,
++    WMI_HIGHEST_PRI,
++    WMI_PRI_MAX_COUNT
++} WMI_PRI_STREAM_ID;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmix.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmix.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/include/wmix.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/include/wmix.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,233 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ * $ATH_LICENSE_HOSTSDK0_C$
++ *
++ * This file contains extensions of the WMI protocol specified in the
++ * Wireless Module Interface (WMI).  It includes definitions of all
++ * extended commands and events.  Extensions include useful commands
++ * that are not directly related to wireless activities.  They may
++ * be hardware-specific, and they might not be supported on all
++ * implementations.
++ *
++ * Extended WMIX commands are encapsulated in a WMI message with
++ * cmd=WMI_EXTENSION_CMD.
++ *
++ */
++
++#ifndef _WMIX_H_
++#define _WMIX_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#ifndef ATH_TARGET
++#include "athstartpack.h"
++#endif
++
++#include "dbglog.h"
++
++/*
++ * Extended WMI commands are those that are needed during wireless
++ * operation, but which are not really wireless commands.  This allows,
++ * for instance, platform-specific commands.  Extended WMI commands are
++ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
++ * Extended WMI events are similarly embedded in a WMI event message with
++ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
++ */
++typedef PREPACK struct {
++    A_UINT32    commandId;
++} POSTPACK WMIX_CMD_HDR;
++
++typedef enum {
++    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
++    WMIX_DSETDATA_REPLY_CMDID,
++    WMIX_GPIO_OUTPUT_SET_CMDID,
++    WMIX_GPIO_INPUT_GET_CMDID,
++    WMIX_GPIO_REGISTER_SET_CMDID,
++    WMIX_GPIO_REGISTER_GET_CMDID,
++    WMIX_GPIO_INTR_ACK_CMDID,
++    WMIX_HB_CHALLENGE_RESP_CMDID,
++    WMIX_DBGLOG_CFG_MODULE_CMDID,
++} WMIX_COMMAND_ID;
++
++typedef enum {
++    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
++    WMIX_DSETCLOSE_EVENTID,
++    WMIX_DSETDATAREQ_EVENTID,
++    WMIX_GPIO_INTR_EVENTID,
++    WMIX_GPIO_DATA_EVENTID,
++    WMIX_GPIO_ACK_EVENTID,
++    WMIX_HB_CHALLENGE_RESP_EVENTID,
++    WMIX_DBGLOG_EVENTID,
++} WMIX_EVENT_ID;
++
++/*
++ * =============DataSet support=================
++ */
++
++/*
++ * WMIX_DSETOPENREQ_EVENTID
++ * DataSet Open Request Event
++ */
++typedef PREPACK struct {
++    A_UINT32 dset_id;
++    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
++} POSTPACK WMIX_DSETOPENREQ_EVENT;
++
++/*
++ * WMIX_DSETCLOSE_EVENTID
++ * DataSet Close Event
++ */
++typedef PREPACK struct {
++    A_UINT32 access_cookie;
++} POSTPACK WMIX_DSETCLOSE_EVENT;
++
++/*
++ * WMIX_DSETDATAREQ_EVENTID
++ * DataSet Data Request Event
++ */
++typedef PREPACK struct {
++    A_UINT32 access_cookie;
++    A_UINT32 offset;
++    A_UINT32 length;
++    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
++    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
++} POSTPACK WMIX_DSETDATAREQ_EVENT;
++
++typedef PREPACK struct {
++    A_UINT32              status;
++    A_UINT32              targ_dset_handle;
++    A_UINT32              targ_reply_fn;
++    A_UINT32              targ_reply_arg;
++    A_UINT32              access_cookie;
++    A_UINT32              size;
++    A_UINT32              version;
++} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
++
++typedef PREPACK struct {
++    A_UINT32              status;
++    A_UINT32              targ_buf;
++    A_UINT32              targ_reply_fn;
++    A_UINT32              targ_reply_arg;
++    A_UINT32              length;
++    A_UINT8               buf[1];
++} POSTPACK WMIX_DSETDATA_REPLY_CMD;
++
++
++/*
++ * =============GPIO support=================
++ * All masks are 18-bit masks with bit N operating on GPIO pin N.
++ */
++
++#include "gpio.h"
++
++/*
++ * Set GPIO pin output state.
++ * In order for output to be driven, a pin must be enabled for output.
++ * This can be done during initialization through the GPIO Configuration
++ * DataSet, or during operation with the enable_mask.
++ *
++ * If a request is made to simultaneously set/clear or set/disable or
++ * clear/disable or disable/enable, results are undefined.
++ */
++typedef PREPACK struct {
++    A_UINT32              set_mask;             /* pins to set */
++    A_UINT32              clear_mask;           /* pins to clear */
++    A_UINT32              enable_mask;          /* pins to enable for output */
++    A_UINT32              disable_mask;         /* pins to disable/tristate */
++} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
++
++/*
++ * Set a GPIO register.  For debug/exceptional cases.
++ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
++ * platform-dependent header.
++ */
++typedef PREPACK struct {
++    A_UINT32              gpioreg_id;           /* GPIO register ID */
++    A_UINT32              value;                /* value to write */
++} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
++
++/* Get a GPIO register.  For debug/exceptional cases. */
++typedef PREPACK struct {
++    A_UINT32              gpioreg_id;           /* GPIO register to read */
++} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
++
++/*
++ * Host acknowledges and re-arms GPIO interrupts.  A single
++ * message should be used to acknowledge all interrupts that
++ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
++ */
++typedef PREPACK struct {
++    A_UINT32              ack_mask;             /* interrupts to acknowledge */
++} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
++
++/*
++ * Target informs Host of GPIO interrupts that have ocurred since the
++ * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
++ * the current GPIO input values is provided -- in order to support
++ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
++ */
++typedef PREPACK struct {
++    A_UINT32              intr_mask;            /* pending GPIO interrupts */
++    A_UINT32              input_values;         /* recent GPIO input values */
++} POSTPACK WMIX_GPIO_INTR_EVENT;
++
++/*
++ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
++ * using a GPIO_DATA_EVENT with
++ *   value set to the mask of GPIO pin inputs and
++ *   reg_id set to GPIO_ID_NONE
++ *
++ *
++ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
++ * using a GPIO_DATA_EVENT with
++ *   value set to the value of the requested register and
++ *   reg_id identifying the register (reflects the original request)
++ * NB: reg_id supports the future possibility of unsolicited
++ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
++ * simplify Host GPIO support.
++ */
++typedef PREPACK struct {
++    A_UINT32              value;
++    A_UINT32              reg_id;
++} POSTPACK WMIX_GPIO_DATA_EVENT;
++
++/*
++ * =============Error Detection support=================
++ */
++
++/*
++ * WMIX_HB_CHALLENGE_RESP_CMDID
++ * Heartbeat Challenge Response command
++ */
++typedef PREPACK struct {
++    A_UINT32              cookie;
++    A_UINT32              source;
++} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
++
++/*
++ * WMIX_HB_CHALLENGE_RESP_EVENTID
++ * Heartbeat Challenge Response Event
++ */
++#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
++
++typedef PREPACK struct {
++    struct dbglog_config_s config;
++} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
++
++#ifndef ATH_TARGET
++#include "athendpack.h"
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMIX_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/Kconfig linux-2.6.29-rc3.owrt.om/drivers/ar6000/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/Kconfig       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/Kconfig    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,31 @@
++config AR6000_WLAN
++        tristate "AR6000 wireless networking over SDIO"
++      depends on MMC
++        select WIRELESS_EXT
++        default m
++        help
++          good luck.
++
++config AR6000_WLAN_DEBUG
++      bool "Enable retrieval of firmware debugging information"
++      depends on AR6000_WLAN
++      default n
++      help
++        The AR6k firmware maintains a log of debugging events that
++        gets flushed to the host on various occasions. Retrieval of
++        this data is very slow, taking several seconds.
++
++        If in doubt, say N.
++
++config AR6000_WLAN_RESET
++      bool "Soft-reset when shutting down"
++      depends on AR6000_WLAN
++      default n
++      help
++        The AR6k module can be explicitly reset when shutting down
++        the device. This adds a delay of about two seconds to suspend,
++        module removal, and so on. Since the WLAN SDIO function is
++        generally disabled soon thereafter anyway, this reset seems
++        superfluous.
++
++        If in doubt, say N.
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/Makefile linux-2.6.29-rc3.owrt.om/drivers/ar6000/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/Makefile      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/Makefile   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,38 @@
++REV ?= 2
++
++PWD := $(shell pwd)
++
++EXTRA_CFLAGS += -I$(src)/include
++
++EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\
++                -DTCMD -DUSER_KEYS \
++                -DNO_SYNC_FLUSH #\
++                -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \
++                -DBLOCK_TX_PATH_FLAG \
++              -DSDIO \
++
++EXTRA_CFLAGS += -DKERNEL_2_6
++
++obj-$(CONFIG_AR6000_WLAN) += ar6000.o
++
++ar6000-objs += htc/ar6k.o                        \
++             htc/ar6k_events.o           \
++               htc/htc_send.o            \
++               htc/htc_recv.o            \
++               htc/htc_services.o          \
++               htc/htc.o                 \
++               hif/hif2.o                        \
++               bmi/bmi.o                   \
++               ar6000/ar6000_drv.o         \
++               ar6000/ar6000_raw_if.o    \
++               ar6000/netbuf.o                   \
++               ar6000/wireless_ext.o     \
++               ar6000/ioctl.o            \
++               miscdrv/common_drv.o      \
++               miscdrv/credit_dist.o     \
++               wmi/wmi.o                   \
++               wlan/wlan_node.o            \
++               wlan/wlan_recv_beacon.o     \
++               wlan/wlan_utils.o
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/miscdrv/common_drv.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/miscdrv/common_drv.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/miscdrv/common_drv.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/miscdrv/common_drv.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,467 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "AR6Khwreg.h"
++#include "targaddrs.h"
++#include "a_osapi.h"
++#include "hif.h"
++#include "htc_api.h"
++#include "bmi.h"
++#include "bmi_msg.h"
++#include "common_drv.h"
++#include "a_debug.h"
++#include "targaddrs.h"
++
++#define HOST_INTEREST_ITEM_ADDRESS(target, item)    \
++(((TargetType) == TARGET_TYPE_AR6001) ?     \
++   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
++   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
++
++
++/* Compile the 4BYTE version of the window register setup routine,
++ * This mitigates host interconnect issues with non-4byte aligned bus requests, some
++ * interconnects use bus adapters that impose strict limitations.
++ * Since diag window access is not intended for performance critical operations, the 4byte mode should
++ * be satisfactory even though it generates 4X the bus activity. */
++
++#ifdef USE_4BYTE_REGISTER_ACCESS
++
++    /* set the window address register (using 4-byte register access ). */
++A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
++{
++    A_STATUS status;
++    A_UINT8 addrValue[4];
++    int i;
++
++        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
++         * last to initiate the access cycle */
++
++    for (i = 1; i <= 3; i++) {
++            /* fill the buffer with the address byte value we want to hit 4 times*/
++        addrValue[0] = ((A_UINT8 *)&Address)[i];
++        addrValue[1] = addrValue[0];
++        addrValue[2] = addrValue[0];
++        addrValue[3] = addrValue[0];
++
++            /* hit each byte of the register address with a 4-byte write operation to the same address,
++             * this is a harmless operation */
++        status = HIFReadWrite(hifDevice,
++                              RegisterAddr+i,
++                              addrValue,
++                              4,
++                              HIF_WR_SYNC_BYTE_FIX,
++                              NULL);
++        if (status != A_OK) {
++            break;
++        }
++    }
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
++             RegisterAddr, Address));
++        return status;
++    }
++
++        /* write the address register again, this time write the whole 4-byte value.
++         * The effect here is that the LSB write causes the cycle to start, the extra
++         * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr,
++                          (A_UCHAR *)(&Address),
++                          4,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
++            RegisterAddr, Address));
++        return status;
++    }
++
++    return A_OK;
++
++
++
++}
++
++
++#else
++
++    /* set the window address register */
++A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
++{
++    A_STATUS status;
++
++        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
++         * last to initiate the access cycle */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr+1,  /* write upper 3 bytes */
++                          ((A_UCHAR *)(&Address))+1,
++                          sizeof(A_UINT32)-1,
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
++             RegisterAddr, Address));
++        return status;
++    }
++
++        /* write the LSB of the register, this initiates the operation */
++    status = HIFReadWrite(hifDevice,
++                          RegisterAddr,
++                          (A_UCHAR *)(&Address),
++                          sizeof(A_UINT8),
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
++            RegisterAddr, Address));
++        return status;
++    }
++
++    return A_OK;
++}
++
++#endif
++
++/*
++ * Read from the AR6000 through its diagnostic window.
++ * No cooperation from the Target is required for this.
++ */
++A_STATUS
++ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
++{
++    A_STATUS status;
++
++        /* set window register to start read cycle */
++    status = ar6000_SetAddressWindowRegister(hifDevice,
++                                             WINDOW_READ_ADDR_ADDRESS,
++                                             *address);
++
++    if (status != A_OK) {
++        return status;
++    }
++
++        /* read the data */
++    status = HIFReadWrite(hifDevice,
++                          WINDOW_DATA_ADDRESS,
++                          (A_UCHAR *)data,
++                          sizeof(A_UINT32),
++                          HIF_RD_SYNC_BYTE_INC,
++                          NULL);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
++        return status;
++    }
++
++    return status;
++}
++
++
++/*
++ * Write to the AR6000 through its diagnostic window.
++ * No cooperation from the Target is required for this.
++ */
++A_STATUS
++ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
++{
++    A_STATUS status;
++
++        /* set write data */
++    status = HIFReadWrite(hifDevice,
++                          WINDOW_DATA_ADDRESS,
++                          (A_UCHAR *)data,
++                          sizeof(A_UINT32),
++                          HIF_WR_SYNC_BYTE_INC,
++                          NULL);
++    if (status != A_OK) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
++        return status;
++    }
++
++        /* set window register, which starts the write cycle */
++    return ar6000_SetAddressWindowRegister(hifDevice,
++                                           WINDOW_WRITE_ADDR_ADDRESS,
++                                           *address);
++}
++
++A_STATUS
++ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                    A_UCHAR *data, A_UINT32 length)
++{
++    A_UINT32 count;
++    A_STATUS status = A_OK;
++
++    for (count = 0; count < length; count += 4, address += 4) {
++        if ((status = ar6000_ReadRegDiag(hifDevice, &address,
++                                         (A_UINT32 *)&data[count])) != A_OK)
++        {
++            break;
++        }
++    }
++
++    return status;
++}
++
++A_STATUS
++ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
++                     A_UCHAR *data, A_UINT32 length)
++{
++    A_UINT32 count;
++    A_STATUS status = A_OK;
++
++    for (count = 0; count < length; count += 4, address += 4) {
++        if ((status = ar6000_WriteRegDiag(hifDevice, &address,
++                                          (A_UINT32 *)&data[count])) != A_OK)
++        {
++            break;
++        }
++    }
++
++    return status;
++}
++
++A_STATUS
++ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice)
++{
++    int i;
++    struct forceROM_s {
++        A_UINT32 addr;
++        A_UINT32 data;
++    };
++    struct forceROM_s *ForceROM;
++    int szForceROM;
++    A_UINT32 instruction;
++
++    static struct forceROM_s ForceROM_REV2[] = {
++        /* NB: This works for old REV2 ROM (old). */
++        {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */
++        {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */
++
++        {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */
++        {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */
++        {MC_REMAP_SIZE_ADDRESS, 0x00000000},   /* ...1 cache line */
++        {MC_REMAP_VALID_ADDRESS, 0x00000001},  /* ...remap is valid */
++
++        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
++
++        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
++    };
++
++    static struct forceROM_s ForceROM_NEW[] = {
++        /* NB: This works for AR6000 ROM REV3 and beyond.  */
++        {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH},
++        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
++        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
++    };
++
++    /*
++     * Examine a semi-arbitrary instruction that's different
++     * in REV2 and other revisions.
++     * NB: If a Host port does not require simultaneous support
++     * for multiple revisions of Target ROM, this code can be elided.
++     */
++    (void)ar6000_ReadDataDiag(hifDevice, 0x01000040,
++                              (A_UCHAR *)&instruction, 4);
++
++    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction));
++
++    if (instruction == 0x3c1aa200) {
++        /* It's an old ROM */
++        ForceROM = ForceROM_REV2;
++        szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM);
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n"));
++    } else {
++        ForceROM = ForceROM_NEW;
++        szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n"));
++    }
++
++    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n"));
++    for (i = 0; i < szForceROM; i++)
++    {
++        if (ar6000_WriteRegDiag(hifDevice,
++                                &ForceROM[i].addr,
++                                &ForceROM[i].data) != A_OK)
++        {
++            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
++            return A_ERROR;
++        }
++    }
++
++    msleep(50); /* delay to allow dragon to come to BMI phase  */
++    return A_OK;
++}
++
++/* reset device */
++A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
++{
++
++#if !defined(DWSIM)
++    A_STATUS status = A_OK;
++    A_UINT32 address;
++    A_UINT32 data;
++
++    do {
++
++        // address = RESET_CONTROL_ADDRESS;
++        data = RESET_CONTROL_COLD_RST_MASK;
++
++          /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */
++        if (TargetType == TARGET_TYPE_AR6001) {
++            address = 0x0C000000;
++        } else {
++            if (TargetType == TARGET_TYPE_AR6002) {
++                address = 0x00004000;
++            } else {
++                A_ASSERT(0);
++            }
++        }
++
++        status = ar6000_WriteRegDiag(hifDevice, &address, &data);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        /*
++         * Read back the RESET CAUSE register to ensure that the cold reset
++         * went through.
++         */
++        msleep(2000); /* 2 second delay to allow things to settle down */
++
++
++        // address = RESET_CAUSE_ADDRESS;
++        /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */
++        if (TargetType == TARGET_TYPE_AR6001) {
++            address = 0x0C0000CC;
++        } else {
++            if (TargetType == TARGET_TYPE_AR6002) {
++                address = 0x000040C0;
++            } else {
++                A_ASSERT(0);
++            }
++        }
++
++        data = 0;
++        status = ar6000_ReadRegDiag(hifDevice, &address, &data);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data));
++        data &= RESET_CAUSE_LAST_MASK;
++        if (data != 2) {
++            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n"));
++        }
++
++    } while (FALSE);
++
++    if (A_FAILED(status)) {
++        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n"));
++    }
++#endif
++    return A_OK;
++}
++
++#define REG_DUMP_COUNT_AR6001   38  /* WORDs, derived from AR6001_regdump.h */
++#define REG_DUMP_COUNT_AR6002   32  /* WORDs, derived from AR6002_regdump.h */
++
++
++#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002
++#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6002
++#else
++#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6001
++#endif
++
++void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
++{
++    A_UINT32 address;
++    A_UINT32 regDumpArea = 0;
++    A_STATUS status;
++    A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX];
++    A_UINT32 regDumpCount = 0;
++    A_UINT32 i;
++
++    do {
++
++            /* the reg dump pointer is copied to the host interest area */
++        address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state);
++
++        if (TargetType == TARGET_TYPE_AR6001) {
++                /* for AR6001, this is a fixed location because the ptr is actually stuck in cache,
++                 * this may be fixed in later firmware versions */
++            address = 0x18a0;
++            regDumpCount = REG_DUMP_COUNT_AR6001;
++
++        } else  if (TargetType == TARGET_TYPE_AR6002) {
++
++            regDumpCount = REG_DUMP_COUNT_AR6002;
++
++        } else {
++            A_ASSERT(0);
++        }
++
++            /* read RAM location through diagnostic window */
++        status = ar6000_ReadRegDiag(hifDevice, &address, &regDumpArea);
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea));
++
++        if (regDumpArea == 0) {
++                /* no reg dump */
++            break;
++        }
++
++        if (TargetType == TARGET_TYPE_AR6001) {
++            regDumpArea &= 0x0FFFFFFF;  /* convert to physical address in target memory */
++        }
++
++            /* fetch register dump data */
++        status = ar6000_ReadDataDiag(hifDevice,
++                                     regDumpArea,
++                                     (A_UCHAR *)&regDumpValues[0],
++                                     regDumpCount * (sizeof(A_UINT32)));
++
++        if (A_FAILED(status)) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n"));
++            break;
++        }
++
++        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n"));
++
++        for (i = 0; i < regDumpCount; i++) {
++            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d :  0x%8.8X \n",i, regDumpValues[i]));
++        }
++
++    } while (FALSE);
++
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/miscdrv/credit_dist.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/miscdrv/credit_dist.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/miscdrv/credit_dist.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/miscdrv/credit_dist.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,346 @@
++
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include "a_debug.h"
++#include "htc_api.h"
++#include "common_drv.h"
++
++/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/
++
++#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */
++
++#ifdef NO_VO_SERVICE
++#define DATA_SVCS_USED 3
++#else
++#define DATA_SVCS_USED 4
++#endif
++
++static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
++
++static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                        HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
++
++/* reduce an ep's credits back to a set limit */
++static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST  *pEpDist,
++                                int                       Limit)
++{
++    int credits;
++
++        /* set the new limit */
++    pEpDist->TxCreditsAssigned = Limit;
++
++    if (pEpDist->TxCredits <= Limit) {
++        return;
++    }
++
++        /* figure out how much to take away */
++    credits = pEpDist->TxCredits - Limit;
++        /* take them away */
++    pEpDist->TxCredits -= credits;
++    pCredInfo->CurrentFreeCredits += credits;
++}
++
++/* give an endpoint some credits from the free credit pool */
++#define GiveCredits(pCredInfo,pEpDist,credits)      \
++{                                                   \
++    (pEpDist)->TxCredits += (credits);              \
++    (pEpDist)->TxCreditsAssigned += (credits);      \
++    (pCredInfo)->CurrentFreeCredits -= (credits);   \
++}
++
++
++/* default credit init callback.
++ * This function is called in the context of HTCStart() to setup initial (application-specific)
++ * credit distributions */
++static void ar6000_credit_init(void                     *Context,
++                               HTC_ENDPOINT_CREDIT_DIST *pEPList,
++                               int                      TotalCredits)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      count;
++    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
++
++    pCredInfo->CurrentFreeCredits = TotalCredits;
++    pCredInfo->TotalAvailableCredits = TotalCredits;
++
++    pCurEpDist = pEPList;
++
++        /* run through the list and initialize */
++    while (pCurEpDist != NULL) {
++
++            /* set minimums for each endpoint */
++        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
++
++        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
++                /* give control service some credits */
++            GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin);
++                /* control service is always marked active, it never goes inactive EVER */
++            SET_EP_ACTIVE(pCurEpDist);
++        } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) {
++                /* this is the lowest priority data endpoint, save this off for easy access */
++            pCredInfo->pLowestPriEpDist = pCurEpDist;
++        }
++
++        /* Streams have to be created (explicit | implicit)for all kinds
++         * of traffic. BE endpoints are also inactive in the beginning.
++         * When BE traffic starts it creates implicit streams that
++         * redistributes credits.
++         */
++
++        /* note, all other endpoints have minimums set but are initially given NO credits.
++         * Credits will be distributed as traffic activity demands */
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++    if (pCredInfo->CurrentFreeCredits <= 0) {
++        AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits));
++        A_ASSERT(FALSE);
++        return;
++    }
++
++        /* reset list */
++    pCurEpDist = pEPList;
++        /* now run through the list and set max operating credit limits for everyone */
++    while (pCurEpDist != NULL) {
++        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
++                /* control service max is just 1 max message */
++            pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg;
++        } else {
++                /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are
++                 * the same.
++                 * We use a simple calculation here, we take the remaining credits and
++                 * determine how many max messages this can cover and then set each endpoint's
++                 * normal value equal to half this amount.
++                 * */
++            count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg;
++            count = count >> 1;
++            count = max(count,pCurEpDist->TxCreditsPerMaxMsg);
++                /* set normal */
++            pCurEpDist->TxCreditsNorm = count;
++
++        }
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++}
++
++
++/* default credit distribution callback
++ * This callback is invoked whenever endpoints require credit distributions.
++ * A lock is held while this function is invoked, this function shall NOT block.
++ * The pEPDistList is a list of distribution structures in prioritized order as
++ * defined by the call to the HTCSetCreditDistribution() api.
++ *
++ */
++static void ar6000_credit_distribute(void                     *Context,
++                                     HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
++                                     HTC_CREDIT_DIST_REASON   Reason)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
++
++    switch (Reason) {
++        case HTC_CREDIT_DIST_SEND_COMPLETE :
++            pCurEpDist = pEPDistList;
++                /* we are given the start of the endpoint distribution list.
++                 * There may be one or more endpoints to service.
++                 * Run through the list and distribute credits */
++            while (pCurEpDist != NULL) {
++
++                if (pCurEpDist->TxCreditsToDist > 0) {
++                        /* return the credits back to the endpoint */
++                    pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
++                        /* always zero out when we are done */
++                    pCurEpDist->TxCreditsToDist = 0;
++
++                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) {
++                            /* reduce to the assigned limit, previous credit reductions
++                             * could have caused the limit to change */
++                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned);
++                    }
++
++                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) {
++                            /* oversubscribed endpoints need to reduce back to normal */
++                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm);
++                    }
++                }
++
++                pCurEpDist = pCurEpDist->pNext;
++            }
++
++            A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
++
++            break;
++
++        case HTC_CREDIT_DIST_ACTIVITY_CHANGE :
++            RedistributeCredits(pCredInfo,pEPDistList);
++            break;
++        case HTC_CREDIT_DIST_SEEK_CREDITS :
++            SeekCredits(pCredInfo,pEPDistList);
++            break;
++        case HTC_DUMP_CREDIT_STATE :
++            AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n",
++                                                                      pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits));
++            break;
++        default:
++            break;
++
++    }
++
++}
++
++/* redistribute credits based on activity change */
++static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList;
++
++        /* walk through the list and remove credits from inactive endpoints */
++    while (pCurEpDist != NULL) {
++
++        if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) {
++            if (!IS_EP_ACTIVE(pCurEpDist)) {
++                    /* EP is inactive, reduce credits back to zero */
++                ReduceCredits(pCredInfo, pCurEpDist, 0);
++            }
++        }
++
++        /* NOTE in the active case, we do not need to do anything further,
++         * when an EP goes active and needs credits, HTC will call into
++         * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS  */
++
++        pCurEpDist = pCurEpDist->pNext;
++    }
++
++    A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
++
++}
++
++/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */
++static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
++                        HTC_ENDPOINT_CREDIT_DIST *pEPDist)
++{
++    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
++    int                      credits = 0;
++    int                      need;
++
++    do {
++
++        if (pEPDist->ServiceID == WMI_CONTROL_SVC) {
++                /* we never oversubscribe on the control service, this is not
++                 * a high performance path and the target never holds onto control
++                 * credits for too long */
++            break;
++        }
++
++        /* for all other services, we follow a simple algorithm of
++         * 1. checking the free pool for credits
++         * 2. checking lower priority endpoints for credits to take */
++
++        if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) {
++                /* try to give more credits than it needs */
++            credits = 2 * pEPDist->TxCreditsSeek;
++        } else {
++                /* give what we can */
++            credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
++        }
++
++        if (credits >= pEPDist->TxCreditsSeek) {
++                /* we found some to fullfill the seek request */
++            break;
++        }
++
++        /* we don't have enough in the free pool, try taking away from lower priority services
++         *
++         * The rule for taking away credits:
++         *   1. Only take from lower priority endpoints
++         *   2. Only take what is allocated above the minimum (never starve an endpoint completely)
++         *   3. Only take what you need.
++         *
++         * */
++
++            /* starting at the lowest priority */
++        pCurEpDist = pCredInfo->pLowestPriEpDist;
++
++            /* work backwards until we hit the endpoint again */
++        while (pCurEpDist != pEPDist) {
++                /* calculate how many we need so far */
++            need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits;
++
++            if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) {
++                    /* the current one has been allocated more than it's minimum and it
++                     * has enough credits assigned above it's minimum to fullfill our need
++                     * try to take away just enough to fullfill our need */
++                ReduceCredits(pCredInfo,
++                              pCurEpDist,
++                              pCurEpDist->TxCreditsAssigned - need);
++
++                if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) {
++                        /* we have enough */
++                    break;
++                }
++            }
++
++            pCurEpDist = pCurEpDist->pPrev;
++        }
++
++            /* return what we can get */
++        credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
++
++    } while (FALSE);
++
++        /* did we find some credits? */
++    if (credits) {
++            /* give what we can */
++        GiveCredits(pCredInfo, pEPDist, credits);
++    }
++
++}
++
++/* initialize and setup credit distribution */
++A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo)
++{
++    HTC_SERVICE_ID servicepriority[5];
++
++    A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO));
++
++    servicepriority[0] = WMI_CONTROL_SVC;  /* highest */
++    servicepriority[1] = WMI_DATA_VO_SVC;
++    servicepriority[2] = WMI_DATA_VI_SVC;
++    servicepriority[3] = WMI_DATA_BE_SVC;
++    servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
++
++        /* set callbacks and priority list */
++    HTCSetCreditDistribution(HTCHandle,
++                             pCredInfo,
++                             ar6000_credit_distribute,
++                             ar6000_credit_init,
++                             servicepriority,
++                             5);
++
++    return A_OK;
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_node.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_node.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_node.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_node.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,371 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * Copyright (c) 2004-2005 Atheros Communications
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ *    derived from this software without specific prior written permission.
++ *
++ * Alternatively, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2 as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $
++ */
++/*
++ * IEEE 802.11 node handling support.
++ */
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++#include <a_debug.h>
++#include <ieee80211.h>
++#include <wlan_api.h>
++#include <ieee80211_node.h>
++#include <htc_api.h>
++#include <wmi.h>
++#include <wmi_api.h>
++
++static void wlan_node_timeout(A_ATH_TIMER arg);
++static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt,
++                                    const A_UINT8 *macaddr);
++
++bss_t *
++wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size)
++{
++    bss_t *ni;
++
++    ni = A_MALLOC_NOWAIT(sizeof(bss_t));
++
++    if (ni != NULL) {
++        ni->ni_buf = A_MALLOC_NOWAIT(wh_size);
++        if (ni->ni_buf == NULL) {
++            A_FREE(ni);
++            ni = NULL;
++            return ni;
++        }
++    } else {
++        return ni;
++    }
++
++    /* Make sure our lists are clean */
++    ni->ni_list_next = NULL;
++    ni->ni_list_prev = NULL;
++    ni->ni_hash_next = NULL;
++    ni->ni_hash_prev = NULL;
++
++    //
++    // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified
++    // that some junk has been stored in this, due to this scan list didn't properly updated
++    //
++    ni->ni_scangen     = 0;
++
++    return ni;
++}
++
++void
++wlan_node_free(bss_t *ni)
++{
++    if (ni->ni_buf != NULL) {
++        A_FREE(ni->ni_buf);
++    }
++    A_FREE(ni);
++}
++
++void
++wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
++                const A_UINT8 *macaddr)
++{
++    int hash;
++
++    A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN);
++    hash = IEEE80211_NODE_HASH(macaddr);
++    ieee80211_node_initref(ni);     /* mark referenced */
++
++    ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC);
++    IEEE80211_NODE_LOCK_BH(nt);
++
++    /* Insert at the end of the node list */
++    ni->ni_list_next = NULL;
++    ni->ni_list_prev = nt->nt_node_last;
++    if(nt->nt_node_last != NULL)
++    {
++        nt->nt_node_last->ni_list_next = ni;
++    }
++    nt->nt_node_last = ni;
++    if(nt->nt_node_first == NULL)
++    {
++        nt->nt_node_first = ni;
++    }
++
++    /* Insert into the hash list i.e. the bucket */
++    if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL)
++    {
++        nt->nt_hash[hash]->ni_hash_prev = ni;
++    }
++    ni->ni_hash_prev = NULL;
++    nt->nt_hash[hash] = ni;
++
++    if (!nt->isTimerArmed) {
++        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
++        nt->isTimerArmed = TRUE;
++    }
++
++    IEEE80211_NODE_UNLOCK_BH(nt);
++}
++
++static bss_t *
++_ieee80211_find_node(struct ieee80211_node_table *nt,
++    const A_UINT8 *macaddr)
++{
++    bss_t *ni;
++    int hash;
++
++    IEEE80211_NODE_LOCK_ASSERT(nt);
++
++    hash = IEEE80211_NODE_HASH(macaddr);
++    for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) {
++        if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
++            ieee80211_node_incref(ni);  /* mark referenced */
++            return ni;
++        }
++    }
++    return NULL;
++}
++
++bss_t *
++wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr)
++{
++    bss_t *ni;
++
++    IEEE80211_NODE_LOCK(nt);
++    ni = _ieee80211_find_node(nt, macaddr);
++    IEEE80211_NODE_UNLOCK(nt);
++    return ni;
++}
++
++/*
++ * Reclaim a node.  If this is the last reference count then
++ * do the normal free work.  Otherwise remove it from the node
++ * table and mark it gone by clearing the back-reference.
++ */
++void
++wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni)
++{
++    IEEE80211_NODE_LOCK(nt);
++
++    if(ni->ni_list_prev == NULL)
++    {
++        /* First in list so fix the list head */
++        nt->nt_node_first = ni->ni_list_next;
++    }
++    else
++    {
++        ni->ni_list_prev->ni_list_next = ni->ni_list_next;
++    }
++
++    if(ni->ni_list_next == NULL)
++    {
++        /* Last in list so fix list tail */
++        nt->nt_node_last = ni->ni_list_prev;
++    }
++    else
++    {
++        ni->ni_list_next->ni_list_prev = ni->ni_list_prev;
++    }
++
++    if(ni->ni_hash_prev == NULL)
++    {
++        /* First in list so fix the list head */
++        int hash;
++        hash = IEEE80211_NODE_HASH(ni->ni_macaddr);
++        nt->nt_hash[hash] = ni->ni_hash_next;
++    }
++    else
++    {
++        ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next;
++    }
++
++    if(ni->ni_hash_next != NULL)
++    {
++        ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev;
++    }
++    wlan_node_free(ni);
++
++    IEEE80211_NODE_UNLOCK(nt);
++}
++
++static void
++wlan_node_dec_free(bss_t *ni)
++{
++    if (ieee80211_node_dectestref(ni)) {
++        wlan_node_free(ni);
++    }
++}
++
++void
++wlan_free_allnodes(struct ieee80211_node_table *nt)
++{
++    bss_t *ni;
++
++    while ((ni = nt->nt_node_first) != NULL) {
++        wlan_node_reclaim(nt, ni);
++    }
++}
++
++void
++wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
++                   void *arg)
++{
++    bss_t *ni;
++    A_UINT32 gen;
++
++    gen = ++nt->nt_scangen;
++
++    IEEE80211_NODE_LOCK(nt);
++    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
++        if (ni->ni_scangen != gen) {
++            ni->ni_scangen = gen;
++            (void) ieee80211_node_incref(ni);
++            (*f)(arg, ni);
++            wlan_node_dec_free(ni);
++        }
++    }
++    IEEE80211_NODE_UNLOCK(nt);
++}
++
++/*
++ * Node table support.
++ */
++void
++wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt)
++{
++    int i;
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt));
++    IEEE80211_NODE_LOCK_INIT(nt);
++
++    nt->nt_node_first = nt->nt_node_last = NULL;
++    for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++)
++    {
++        nt->nt_hash[i] = NULL;
++    }
++    A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt);
++    nt->isTimerArmed = FALSE;
++    nt->nt_wmip = wmip;
++}
++
++static void
++wlan_node_timeout(A_ATH_TIMER arg)
++{
++    struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg;
++    bss_t *bss, *nextBss;
++    A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE;
++
++    wmi_get_current_bssid(nt->nt_wmip, myBssid);
++
++    bss = nt->nt_node_first;
++    while (bss != NULL)
++    {
++        nextBss = bss->ni_list_next;
++        if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0)
++        {
++
++            if (bss->ni_tstamp <= A_GET_MS(0))
++            {
++               /*
++                * free up all but the current bss - if set
++                */
++                wlan_node_reclaim(nt, bss);
++            }
++            else
++            {
++                /*
++                 * Re-arm timer, only when we have a bss other than
++                 * current bss AND it is not aged-out.
++                 */
++                reArmTimer = TRUE;
++            }
++        }
++        bss = nextBss;
++    }
++
++    if(reArmTimer)
++        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
++
++    nt->isTimerArmed = reArmTimer;
++}
++
++void
++wlan_node_table_cleanup(struct ieee80211_node_table *nt)
++{
++    A_UNTIMEOUT(&nt->nt_inact_timer);
++    A_DELETE_TIMER(&nt->nt_inact_timer);
++    wlan_free_allnodes(nt);
++    IEEE80211_NODE_LOCK_DESTROY(nt);
++}
++
++bss_t *
++wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
++                                      A_UINT32 ssidLength, A_BOOL bIsWPA2)
++{
++    bss_t   *ni = NULL;
++      A_UCHAR *pIESsid = NULL;
++
++    IEEE80211_NODE_LOCK (nt);
++
++    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
++              pIESsid = ni->ni_cie.ie_ssid;
++              if (pIESsid[1] <= 32) {
++
++                      // Step 1 : Check SSID
++                      if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) {
++
++                              // Step 2 : if SSID matches, check WPA or WPA2
++                              if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) {
++                                      ieee80211_node_incref (ni);  /* mark referenced */
++                                      IEEE80211_NODE_UNLOCK (nt);
++                                      return ni;
++                              }
++                              if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) {
++                                      ieee80211_node_incref(ni);  /* mark referenced */
++                                      IEEE80211_NODE_UNLOCK (nt);
++                                      return ni;
++                              }
++                      }
++              }
++    }
++
++    IEEE80211_NODE_UNLOCK (nt);
++
++    return NULL;
++}
++
++void
++wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni)
++{
++      IEEE80211_NODE_LOCK (nt);
++      wlan_node_dec_free (ni);
++      IEEE80211_NODE_UNLOCK (nt);
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_recv_beacon.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_recv_beacon.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_recv_beacon.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_recv_beacon.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,192 @@
++/*-
++ * Copyright (c) 2001 Atsushi Onoe
++ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ *    derived from this software without specific prior written permission.
++ *
++ * Alternatively, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2 as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++/*
++ * IEEE 802.11 input handling.
++ */
++
++#include "a_config.h"
++#include "athdefs.h"
++#include "a_types.h"
++#include "a_osapi.h"
++#include <wmi.h>
++#include <ieee80211.h>
++#include <wlan_api.h>
++
++#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do {         \
++    if ((_len) < (_minlen)) {                   \
++        return A_EINVAL;                         \
++    }                               \
++} while (0)
++
++#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do {         \
++    if ((__elem) == NULL) {                     \
++        return A_EINVAL;                         \
++    }                               \
++    if ((__elem)[1] > (__maxlen)) {                 \
++        return A_EINVAL;                         \
++    }                               \
++} while (0)
++
++
++/* unaligned little endian access */
++#define LE_READ_2(p)                            \
++    ((A_UINT16)                            \
++     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8)))
++
++#define LE_READ_4(p)                            \
++    ((A_UINT32)                            \
++     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8) | \
++      (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24)))
++
++
++static int __inline
++iswpaoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
++}
++
++static int __inline
++iswmmoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI);
++}
++
++static int __inline
++iswmmparam(const A_UINT8 *frm)
++{
++    return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE;
++}
++
++static int __inline
++iswmminfo(const A_UINT8 *frm)
++{
++    return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE;
++}
++
++static int __inline
++isatherosoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
++}
++
++static int __inline
++iswscoui(const A_UINT8 *frm)
++{
++    return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI);
++}
++
++A_STATUS
++wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie)
++{
++    A_UINT8 *frm, *efrm;
++
++    frm = buf;
++    efrm = (A_UINT8 *) (frm + framelen);
++
++    /*
++     * beacon/probe response frame format
++     *  [8] time stamp
++     *  [2] beacon interval
++     *  [2] capability information
++     *  [tlv] ssid
++     *  [tlv] supported rates
++     *  [tlv] country information
++     *  [tlv] parameter set (FH/DS)
++     *  [tlv] erp information
++     *  [tlv] extended supported rates
++     *  [tlv] WMM
++     *  [tlv] WPA or RSN
++     *  [tlv] Atheros Advanced Capabilities
++     */
++    IEEE80211_VERIFY_LENGTH(efrm - frm, 12);
++    A_MEMZERO(cie, sizeof(*cie));
++
++    cie->ie_tstamp = frm; frm += 8;
++    cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
++    cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
++    cie->ie_chan = 0;
++
++    while (frm < efrm) {
++        switch (*frm) {
++        case IEEE80211_ELEMID_SSID:
++            cie->ie_ssid = frm;
++            break;
++        case IEEE80211_ELEMID_RATES:
++            cie->ie_rates = frm;
++            break;
++        case IEEE80211_ELEMID_COUNTRY:
++            cie->ie_country = frm;
++            break;
++        case IEEE80211_ELEMID_FHPARMS:
++            break;
++        case IEEE80211_ELEMID_DSPARMS:
++            cie->ie_chan = frm[2];
++            break;
++        case IEEE80211_ELEMID_TIM:
++            cie->ie_tim = frm;
++            break;
++        case IEEE80211_ELEMID_IBSSPARMS:
++            break;
++        case IEEE80211_ELEMID_XRATES:
++            cie->ie_xrates = frm;
++            break;
++        case IEEE80211_ELEMID_ERP:
++            if (frm[1] != 1) {
++                //A_PRINTF("Discarding ERP Element - Bad Len\n");
++                return A_EINVAL;
++            }
++            cie->ie_erp = frm[2];
++            break;
++        case IEEE80211_ELEMID_RSN:
++            cie->ie_rsn = frm;
++            break;
++        case IEEE80211_ELEMID_VENDOR:
++            if (iswpaoui(frm)) {
++                cie->ie_wpa = frm;
++            } else if (iswmmoui(frm)) {
++                cie->ie_wmm = frm;
++            } else if (isatherosoui(frm)) {
++                cie->ie_ath = frm;
++            } else if(iswscoui(frm)) {
++                cie->ie_wsc = frm;
++            }
++            break;
++        default:
++            break;
++        }
++        frm += frm[1] + 2;
++    }
++    IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE);
++    IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN);
++
++    return A_OK;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_utils.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_utils.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wlan/wlan_utils.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wlan/wlan_utils.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++ * Copyright (c) 2004-2005 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This module implements frequently used wlan utilies
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++
++/*
++ * converts ieee channel number to frequency
++ */
++A_UINT16
++wlan_ieee2freq(int chan)
++{
++    if (chan == 14) {
++        return 2484;
++    }
++    if (chan < 14) {    /* 0-13 */
++        return (2407 + (chan*5));
++    }
++    if (chan < 27) {    /* 15-26 */
++        return (2512 + ((chan-15)*20));
++    }
++    return (5000 + (chan*5));
++}
++
++/*
++ * Converts MHz frequency to IEEE channel number.
++ */
++A_UINT32
++wlan_freq2ieee(A_UINT16 freq)
++{
++    if (freq == 2484)
++        return 14;
++    if (freq < 2484)
++        return (freq - 2407) / 5;
++    if (freq < 5000)
++        return 15 + ((freq - 2512) / 20);
++    return (freq - 5000) / 5;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi.c linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi.c
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,3954 @@
++/*
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This module implements the hardware independent layer of the
++ * Wireless Module Interface (WMI) protocol.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#include <a_config.h>
++#include <athdefs.h>
++#include <a_types.h>
++#include <a_osapi.h>
++#include "htc.h"
++#include "htc_api.h"
++#include "wmi.h"
++#include <ieee80211.h>
++#include <ieee80211_node.h>
++#include <wlan_api.h>
++#include <wmi_api.h>
++#include "dset_api.h"
++#include "gpio_api.h"
++#include "wmi_host.h"
++#include "a_drv.h"
++#include "a_drv_api.h"
++#include "a_debug.h"
++#include "dbglog_api.h"
++
++static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                        int len);
++static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                        int len);
++static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                       int len);
++static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_sync_point(struct wmi_t *wmip);
++
++static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                         int len);
++static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                       int len);
++static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                             int len);
++
++static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++#ifdef CONFIG_HOST_DSET_SUPPORT
++static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++
++static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                     int len);
++static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
++                                      int len);
++static A_STATUS
++wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len);
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++#endif
++
++static A_STATUS
++wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_BOOL
++wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex);
++
++static A_STATUS
++wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS
++wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
++
++int wps_enable;
++static const A_INT32 wmi_rateTable[] = {
++    1000,
++    2000,
++    5500,
++    11000,
++    6000,
++    9000,
++    12000,
++    18000,
++    24000,
++    36000,
++    48000,
++    54000,
++    0};
++
++#define MODE_A_SUPPORT_RATE_START       4
++#define MODE_A_SUPPORT_RATE_STOP        11
++
++#define MODE_GONLY_SUPPORT_RATE_START   MODE_A_SUPPORT_RATE_START
++#define MODE_GONLY_SUPPORT_RATE_STOP    MODE_A_SUPPORT_RATE_STOP
++
++#define MODE_B_SUPPORT_RATE_START       0
++#define MODE_B_SUPPORT_RATE_STOP        3
++
++#define MODE_G_SUPPORT_RATE_START       0
++#define MODE_G_SUPPORT_RATE_STOP        11
++
++#define MAX_NUMBER_OF_SUPPORT_RATES     (MODE_G_SUPPORT_RATE_STOP + 1)
++
++/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */
++const A_UINT8 up_to_ac[]= {
++                WMM_AC_BE,
++                WMM_AC_BK,
++                WMM_AC_BK,
++                WMM_AC_BE,
++                WMM_AC_VI,
++                WMM_AC_VI,
++                WMM_AC_VO,
++                WMM_AC_VO,
++            };
++
++void *
++wmi_init(void *devt)
++{
++    struct wmi_t *wmip;
++
++    wmip = A_MALLOC(sizeof(struct wmi_t));
++    if (wmip == NULL) {
++        return (NULL);
++    }
++    A_MEMZERO(wmip, sizeof(*wmip));
++    A_MUTEX_INIT(&wmip->wmi_lock);
++    wmip->wmi_devt = devt;
++    wlan_node_table_init(wmip, &wmip->wmi_scan_table);
++    wmi_qos_state_init(wmip);
++    wmip->wmi_powerMode = REC_POWER;
++    wmip->wmi_phyMode = WMI_11G_MODE;
++
++    return (wmip);
++}
++
++void
++wmi_qos_state_init(struct wmi_t *wmip)
++{
++    A_UINT8 i;
++
++    if (wmip == NULL) {
++        return;
++    }
++    LOCK_WMI(wmip);
++
++    /* Initialize QoS States */
++    wmip->wmi_numQoSStream = 0;
++
++    wmip->wmi_fatPipeExists = 0;
++
++    for (i=0; i < WMM_NUM_AC; i++) {
++        wmip->wmi_streamExistsForAC[i]=0;
++    }
++
++        /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */
++    WMI_INIT_WMISTREAM_AC_MAP(wmip);
++
++    UNLOCK_WMI(wmip);
++
++    A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1);
++}
++
++void
++wmi_shutdown(struct wmi_t *wmip)
++{
++    if (wmip != NULL) {
++        wlan_node_table_cleanup(&wmip->wmi_scan_table);
++        if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) {
++            A_MUTEX_DELETE(&wmip->wmi_lock);
++        }
++        A_FREE(wmip);
++    }
++}
++
++/*
++ *  performs DIX to 802.3 encapsulation for transmit packets.
++ *  uses passed in buffer.  Returns buffer or NULL if failed.
++ *  Assumes the entire DIX header is contigous and that there is
++ *  enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
++ */
++A_STATUS
++wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf)
++{
++    A_UINT8          *datap;
++    A_UINT16         typeorlen;
++    ATH_MAC_HDR      macHdr;
++    ATH_LLC_SNAP_HDR *llcHdr;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_HEADROOM(osbuf) <
++        (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR)))
++    {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN);
++
++    if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) {
++        /*
++         * packet is already in 802.3 format - return success
++         */
++        A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG));
++        return (A_OK);
++    }
++
++    /*
++     * Save mac fields and length to be inserted later
++     */
++    A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN);
++    A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN);
++    macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) +
++                                  sizeof(ATH_LLC_SNAP_HDR));
++
++    /*
++     * Make room for LLC+SNAP headers
++     */
++    if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
++
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
++    llcHdr->dsap      = 0xAA;
++    llcHdr->ssap      = 0xAA;
++    llcHdr->cntl      = 0x03;
++    llcHdr->orgCode[0] = 0x0;
++    llcHdr->orgCode[1] = 0x0;
++    llcHdr->orgCode[2] = 0x0;
++    llcHdr->etherType = typeorlen;
++
++    return (A_OK);
++}
++
++/*
++ * Adds a WMI data header
++ * Assumes there is enough room in the buffer to add header.
++ */
++A_STATUS
++wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType)
++{
++    WMI_DATA_HDR     *dtHdr;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
++    dtHdr->info = msgType;
++    dtHdr->rssi = 0;
++
++    return (A_OK);
++}
++
++A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up)
++{
++    A_UINT8         *datap;
++    A_UINT8         trafficClass = WMM_AC_BE, userPriority = up;
++    ATH_LLC_SNAP_HDR *llcHdr;
++    A_UINT16        ipType = IP_ETHERTYPE;
++    WMI_DATA_HDR     *dtHdr;
++    WMI_CREATE_PSTREAM_CMD  cmd;
++    A_BOOL           streamExists = FALSE;
++
++    A_ASSERT(osbuf != NULL);
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    if (up == UNDEFINED_PRI) {
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) +
++                                  sizeof(ATH_MAC_HDR));
++
++        if (llcHdr->etherType == A_CPU2BE16(ipType)) {
++        /* Extract the endpoint info from the TOS field in the IP header */
++        userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR));
++        }
++    }
++
++    if (userPriority < MAX_NUM_PRI) {
++        trafficClass = convert_userPriority_to_trafficClass(userPriority);
++    }
++
++    dtHdr = (WMI_DATA_HDR *)datap;
++    if(dir==UPLINK_TRAFFIC)
++        dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT;  /* lower 3-bits are 802.1d priority */
++
++    LOCK_WMI(wmip);
++    streamExists = wmip->wmi_fatPipeExists;
++    UNLOCK_WMI(wmip);
++
++    if (!(streamExists & (1 << trafficClass))) {
++
++        A_MEMZERO(&cmd, sizeof(cmd));
++          cmd.trafficClass = trafficClass;
++          cmd.userPriority = userPriority;
++              cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT;
++            /* Implicit streams are created with TSID 0xFF */
++        cmd.tsid = WMI_IMPLICIT_PSTREAM;
++        wmi_create_pstream_cmd(wmip, &cmd);
++    }
++
++    return trafficClass;
++}
++
++WMI_PRI_STREAM_ID
++wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass)
++{
++    return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass);
++}
++
++/*
++ *  performs 802.3 to DIX encapsulation for received packets.
++ *  Assumes the entire 802.3 header is contigous.
++ */
++A_STATUS
++wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf)
++{
++    A_UINT8          *datap;
++    ATH_MAC_HDR      macHdr;
++    ATH_LLC_SNAP_HDR *llcHdr;
++
++    A_ASSERT(osbuf != NULL);
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR));
++    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
++    macHdr.typeOrLen = llcHdr->etherType;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
++
++    return (A_OK);
++}
++
++/*
++ * Removes a WMI data header
++ */
++A_STATUS
++wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf)
++{
++    A_ASSERT(osbuf != NULL);
++
++    return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR)));
++}
++
++void
++wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg)
++{
++    wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg);
++}
++
++/*
++ * WMI Extended Event received from Target.
++ */
++A_STATUS
++wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf)
++{
++    WMIX_CMD_HDR *cmd;
++    A_UINT16 id;
++    A_UINT8 *datap;
++    A_UINT32 len;
++    A_STATUS status = A_OK;
++
++    if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    id = cmd->commandId;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++    len = A_NETBUF_LEN(osbuf);
++
++    switch (id) {
++    case (WMIX_DSETOPENREQ_EVENTID):
++        status = wmi_dset_open_req_rx(wmip, datap, len);
++        break;
++#ifdef CONFIG_HOST_DSET_SUPPORT
++    case (WMIX_DSETCLOSE_EVENTID):
++        status = wmi_dset_close_rx(wmip, datap, len);
++        break;
++    case (WMIX_DSETDATAREQ_EVENTID):
++        status = wmi_dset_data_req_rx(wmip, datap, len);
++        break;
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++    case (WMIX_GPIO_INTR_EVENTID):
++        wmi_gpio_intr_rx(wmip, datap, len);
++        break;
++    case (WMIX_GPIO_DATA_EVENTID):
++        wmi_gpio_data_rx(wmip, datap, len);
++        break;
++    case (WMIX_GPIO_ACK_EVENTID):
++        wmi_gpio_ack_rx(wmip, datap, len);
++        break;
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++    case (WMIX_HB_CHALLENGE_RESP_EVENTID):
++        wmi_hbChallengeResp_rx(wmip, datap, len);
++        break;
++    case (WMIX_DBGLOG_EVENTID):
++        wmi_dbglog_event_rx(wmip, datap, len);
++        break;
++    default:
++        A_DPRINTF(DBG_WMI|DBG_ERROR,
++            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
++        wmip->wmi_stats.cmd_id_err++;
++        status = A_ERROR;
++        break;
++    }
++
++    return status;
++}
++
++/*
++ * Control Path
++ */
++A_UINT32 cmdRecvNum;
++
++A_STATUS
++wmi_control_rx(struct wmi_t *wmip, void *osbuf)
++{
++    WMI_CMD_HDR *cmd;
++    A_UINT16 id;
++    A_UINT8 *datap;
++    A_UINT32 len, i, loggingReq;
++    A_STATUS status = A_OK;
++
++    A_ASSERT(osbuf != NULL);
++    if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    id = cmd->commandId;
++
++    if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
++        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
++        wmip->wmi_stats.cmd_len_err++;
++        A_NETBUF_FREE(osbuf);
++        return A_ERROR;
++    }
++
++    datap = A_NETBUF_DATA(osbuf);
++    len = A_NETBUF_LEN(osbuf);
++
++    ar6000_get_driver_cfg(wmip->wmi_devt,
++                    AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS,
++                    &loggingReq);
++
++    if(loggingReq) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id));
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum));
++        for(i = 0; i < len; i++)
++            AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i]));
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n"));
++    }
++
++    LOCK_WMI(wmip);
++    cmdRecvNum++;
++    UNLOCK_WMI(wmip);
++
++    switch (id) {
++    case (WMI_GET_BITRATE_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG));
++        status = wmi_bitrate_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_CHANNEL_LIST_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG));
++        status = wmi_channelList_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_TX_PWR_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG));
++        status = wmi_txPwr_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_READY_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG));
++        status = wmi_ready_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt);
++        break;
++    case (WMI_CONNECT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG));
++        status = wmi_connect_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_DISCONNECT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG));
++        status = wmi_disconnect_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_TKIP_MICERR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG));
++        status = wmi_tkip_micerr_event_rx(wmip, datap, len);
++        break;
++    case (WMI_BSSINFO_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG));
++        status = wmi_bssInfo_event_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_REGDOMAIN_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG));
++        status = wmi_regDomain_event_rx(wmip, datap, len);
++        break;
++    case (WMI_PSTREAM_TIMEOUT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG));
++        status = wmi_pstream_timeout_event_rx(wmip, datap, len);
++            /* pstreams are fatpipe abstractions that get implicitly created.
++             * User apps only deal with thinstreams. creation of a thinstream
++             * by the user or data traffic flow in an AC triggers implicit
++             * pstream creation. Do we need to send this event to App..?
++             * no harm in sending it.
++             */
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_NEIGHBOR_REPORT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG));
++        status = wmi_neighborReport_event_rx(wmip, datap, len);
++        break;
++    case (WMI_SCAN_COMPLETE_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG));
++        status = wmi_scanComplete_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_CMDERROR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG));
++        status = wmi_errorEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_STATISTICS_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG));
++        status = wmi_statsEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_RSSI_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_rssiThresholdEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_ERROR_REPORT_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG));
++        status = wmi_reportErrorEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_OPT_RX_FRAME_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG));
++        status = wmi_opt_frame_event_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_ROAM_TBL_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG));
++        status = wmi_roam_tbl_event_rx(wmip, datap, len);
++        break;
++    case (WMI_EXTENSION_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG));
++        status = wmi_control_rx_xtnd(wmip, osbuf);
++        break;
++    case (WMI_CAC_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG));
++        status = wmi_cac_event_rx(wmip, datap, len);
++        break;
++    case (WMI_REPORT_ROAM_DATA_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG));
++        status = wmi_roam_data_event_rx(wmip, datap, len);
++        break;
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++    case (WMI_TEST_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG));
++        status = wmi_tcmd_test_report_rx(wmip, datap, len);
++        break;
++#endif
++    case (WMI_GET_FIXRATES_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG));
++        status = wmi_ratemask_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_TX_RETRY_ERR_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG));
++        status = wmi_txRetryErrEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_SNR_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_snrThresholdEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_LQ_THRESHOLD_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG));
++        status = wmi_lqThresholdEvent_rx(wmip, datap, len);
++        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
++        break;
++    case (WMI_APLIST_EVENTID):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n"));
++        status = wmi_aplistEvent_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_KEEPALIVE_CMDID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG));
++        status = wmi_keepalive_reply_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_WOW_LIST_EVENTID):
++        status = wmi_get_wow_list_event_rx(wmip, datap, len);
++        break;
++    case (WMI_GET_PMKID_LIST_EVENTID):
++        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG));
++        status = wmi_get_pmkid_list_event_rx(wmip, datap, len);
++        break;
++    default:
++        A_DPRINTF(DBG_WMI|DBG_ERROR,
++            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
++        wmip->wmi_stats.cmd_id_err++;
++        status = A_ERROR;
++        break;
++    }
++
++    A_NETBUF_FREE(osbuf);
++
++    return status;
++}
++
++static A_STATUS
++wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap;
++
++    if (len < sizeof(WMI_READY_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++    wmip->wmi_ready = TRUE;
++    A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CONNECT_EVENT *ev;
++
++    if (len < sizeof(WMI_CONNECT_EVENT)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_CONNECT_EVENT *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
++        DBGARG, ev->channel,
++        ev->bssid[0], ev->bssid[1], ev->bssid[2],
++        ev->bssid[3], ev->bssid[4], ev->bssid[5]));
++
++    A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN);
++
++    A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid,
++                         ev->listenInterval, ev->beaconInterval,
++                         ev->networkType, ev->beaconIeLen,
++                         ev->assocReqLen, ev->assocRespLen,
++                         ev->assocInfo);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_REG_DOMAIN_EVENT *ev;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_REG_DOMAIN_EVENT *)datap;
++
++    A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_NEIGHBOR_REPORT_EVENT *ev;
++    int numAps;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap;
++    numAps = ev->numberOfAps;
++
++    if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) {
++        return A_EINVAL;
++    }
++
++    A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_DISCONNECT_EVENT *ev;
++
++    if (len < sizeof(WMI_DISCONNECT_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    ev = (WMI_DISCONNECT_EVENT *)datap;
++
++    A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid));
++
++    A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid,
++                            ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TKIP_MICERR_EVENT *ev;
++
++    if (len < sizeof(*ev)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    ev = (WMI_TKIP_MICERR_EVENT *)datap;
++    A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    bss_t *bss;
++    WMI_BSS_INFO_HDR *bih;
++    A_UINT8 *buf;
++    A_UINT32 nodeCachingAllowed;
++
++    if (len <= sizeof(WMI_BSS_INFO_HDR)) {
++        return A_EINVAL;
++    }
++
++    A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len);
++    /* What is driver config for wlan node caching? */
++    if(ar6000_get_driver_cfg(wmip->wmi_devt,
++                    AR6000_DRIVER_CFG_GET_WLANNODECACHING,
++                    &nodeCachingAllowed) != A_OK) {
++        return A_EINVAL;
++    }
++
++    if(!nodeCachingAllowed) {
++        return A_OK;
++    }
++
++
++    bih = (WMI_BSS_INFO_HDR *)datap;
++    buf = datap + sizeof(WMI_BSS_INFO_HDR);
++    len -= sizeof(WMI_BSS_INFO_HDR);
++
++    A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, "
++              "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG,
++              bih->channel, (unsigned char) bih->rssi, bih->bssid[0],
++              bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4],
++              bih->bssid[5]));
++
++    if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) {
++          printk("%s() A_OK 2\n", __FUNCTION__);
++              return A_OK;
++    }
++
++    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
++    if (bss != NULL) {
++        /*
++         * Free up the node.  Not the most efficient process given
++         * we are about to allocate a new node but it is simple and should be
++         * adequate.
++         */
++        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
++    }
++
++    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
++    if (bss == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    bss->ni_snr        = bih->snr;
++    bss->ni_rssi       = bih->rssi;
++    A_ASSERT(bss->ni_buf != NULL);
++    A_MEMCPY(bss->ni_buf, buf, len);
++
++    if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) {
++        wlan_node_free(bss);
++        return A_EINVAL;
++    }
++
++    /*
++     * Update the frequency in ie_chan, overwriting of channel number
++     * which is done in wlan_parse_beacon
++     */
++    bss->ni_cie.ie_chan = bih->channel;
++    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    bss_t *bss;
++    WMI_OPT_RX_INFO_HDR *bih;
++    A_UINT8 *buf;
++
++    if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) {
++        return A_EINVAL;
++    }
++
++    bih = (WMI_OPT_RX_INFO_HDR *)datap;
++    buf = datap + sizeof(WMI_OPT_RX_INFO_HDR);
++    len -= sizeof(WMI_OPT_RX_INFO_HDR);
++
++    A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG,
++        bih->bssid[4], bih->bssid[5]));
++
++    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
++    if (bss != NULL) {
++        /*
++         * Free up the node.  Not the most efficient process given
++         * we are about to allocate a new node but it is simple and should be
++         * adequate.
++         */
++        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
++    }
++
++    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
++    if (bss == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    bss->ni_snr        = bih->snr;
++    bss->ni_cie.ie_chan = bih->channel;
++    A_ASSERT(bss->ni_buf != NULL);
++    A_MEMCPY(bss->ni_buf, buf, len);
++    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
++
++    return A_OK;
++}
++
++    /* This event indicates inactivity timeout of a fatpipe(pstream)
++     * at the target
++     */
++static A_STATUS
++wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_PSTREAM_TIMEOUT_EVENT *ev;
++
++    if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) {
++        return A_EINVAL;
++    }
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG));
++
++    ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap;
++
++        /* When the pstream (fat pipe == AC) timesout, it means there were no
++         * thinStreams within this pstream & it got implicitly created due to
++         * data flow on this AC. We start the inactivity timer only for
++         * implicitly created pstream. Just reset the host state.
++         */
++        /* Set the activeTsids for this AC to 0 */
++    LOCK_WMI(wmip);
++    wmip->wmi_streamExistsForAC[ev->trafficClass]=0;
++    wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass);
++    UNLOCK_WMI(wmip);
++
++        /*Indicate inactivity to driver layer for this fatpipe (pstream)*/
++    A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_BIT_RATE_CMD *reply;
++    A_INT32 rate;
++
++    if (len < sizeof(WMI_BIT_RATE_CMD)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_BIT_RATE_CMD *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex));
++
++    if (reply->rateIndex == RATE_AUTO) {
++        rate = RATE_AUTO;
++    } else {
++        rate = wmi_rateTable[(A_UINT32) reply->rateIndex];
++    }
++
++    A_WMI_BITRATE_RX(wmip->wmi_devt, rate);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_FIX_RATES_CMD *reply;
++
++    if (len < sizeof(WMI_BIT_RATE_CMD)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_FIX_RATES_CMD *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask));
++
++    A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CHANNEL_LIST_REPLY *reply;
++
++    if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_CHANNEL_LIST_REPLY *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels,
++                          reply->channelList);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TX_PWR_REPLY *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TX_PWR_REPLY *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM);
++
++    return A_OK;
++}
++static A_STATUS
++wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_GET_KEEPALIVE_CMD *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_GET_KEEPALIVE_CMD *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured);
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETOPENREQ_EVENT *dsetopenreq;
++
++    if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) {
++        return A_EINVAL;
++    }
++    dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap;
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id));
++    A_WMI_DSET_OPEN_REQ(wmip->wmi_devt,
++                        dsetopenreq->dset_id,
++                        dsetopenreq->targ_dset_handle,
++                        dsetopenreq->targ_reply_fn,
++                        dsetopenreq->targ_reply_arg);
++
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++static A_STATUS
++wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETCLOSE_EVENT *dsetclose;
++
++    if (len < sizeof(WMIX_DSETCLOSE_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    dsetclose = (WMIX_DSETCLOSE_EVENT *)datap;
++    A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_DSETDATAREQ_EVENT *dsetdatareq;
++
++    if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) {
++        return A_EINVAL;
++    }
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap;
++    A_WMI_DSET_DATA_REQ(wmip->wmi_devt,
++                         dsetdatareq->access_cookie,
++                         dsetdatareq->offset,
++                         dsetdatareq->length,
++                         dsetdatareq->targ_buf,
++                         dsetdatareq->targ_reply_fn,
++                         dsetdatareq->targ_reply_arg);
++
++    return A_OK;
++}
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++static A_STATUS
++wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_SCAN_COMPLETE_EVENT *ev;
++
++    ev = (WMI_SCAN_COMPLETE_EVENT *)datap;
++    A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status);
++
++    return A_OK;
++}
++
++/*
++ * Target is reporting a programming error.  This is for
++ * developer aid only.  Target only checks a few common violations
++ * and it is responsibility of host to do all error checking.
++ * Behavior of target after wmi error event is undefined.
++ * A reset is recommended.
++ */
++static A_STATUS
++wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CMD_ERROR_EVENT *ev;
++
++    ev = (WMI_CMD_ERROR_EVENT *)datap;
++    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId));
++    switch (ev->errorCode) {
++    case (INVALID_PARAM):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n"));
++        break;
++    case (ILLEGAL_STATE):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n"));
++        break;
++    case (INTERNAL_ERROR):
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n"));
++        break;
++    }
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_STATS *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_STATS *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_RSSI_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_RSSI_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi);
++
++    return A_OK;
++}
++
++
++static A_STATUS
++wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ERROR_REPORT_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_CAC_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_CAC_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac,
++                reply->cac_indication, reply->statusCode,
++                reply->tspecSuggestion);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_HB_CHALLENGE_RESP_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG));
++
++    A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ROAM_TBL *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ROAM_TBL *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TARGET_ROAM_DATA *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TARGET_ROAM_DATA *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_TX_RETRY_ERR_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_TX_RETRY_ERR_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_SNR_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_SNR_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_LQ_THRESHOLD_EVENT *reply;
++
++    if (len < sizeof(*reply)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_LQ_THRESHOLD_EVENT *)datap;
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_UINT16 ap_info_entry_size;
++    WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap;
++    WMI_AP_INFO_V1 *ap_info_v1;
++    A_UINT8 i;
++
++    if (len < sizeof(WMI_APLIST_EVENT)) {
++        return A_EINVAL;
++    }
++
++    if (ev->apListVer == APLIST_VER1) {
++        ap_info_entry_size = sizeof(WMI_AP_INFO_V1);
++        ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList;
++    } else {
++        return A_EINVAL;
++    }
++
++    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP));
++    if (len < (int)(sizeof(WMI_APLIST_EVENT) +
++              (ev->numAP - 1) * ap_info_entry_size))
++    {
++        return A_EINVAL;
++    }
++
++    /*
++     * AP List Ver1 Contents
++     */
++    for (i = 0; i < ev->numAP; i++) {
++        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\
++                    "Channel %d\n", i,
++                   ap_info_v1->bssid[0], ap_info_v1->bssid[1],
++                   ap_info_v1->bssid[2], ap_info_v1->bssid[3],
++                   ap_info_v1->bssid[4], ap_info_v1->bssid[5],
++                   ap_info_v1->channel));
++        ap_info_v1++;
++    }
++    return A_OK;
++}
++
++static A_STATUS
++wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_UINT32 dropped;
++
++    dropped = *((A_UINT32 *)datap);
++    datap += sizeof(dropped);
++    len -= sizeof(dropped);
++    A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len);
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++static A_STATUS
++wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG,
++        gpio_intr->intr_mask, gpio_intr->input_values));
++
++    A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG,
++        gpio_data->reg_id, gpio_data->value));
++
++    A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value);
++
++    return A_OK;
++}
++
++static A_STATUS
++wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    A_WMI_GPIO_ACK_RX();
++
++    return A_OK;
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++/*
++ * Called to send a wmi command. Command specific data is already built
++ * on osbuf and current osbuf->data points to it.
++ */
++A_STATUS
++wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++               WMI_SYNC_FLAG syncflag)
++{
++#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID))
++    WMI_CMD_HDR         *cHdr;
++    WMI_PRI_STREAM_ID   streamID = WMI_CONTROL_PRI;
++
++    A_ASSERT(osbuf != NULL);
++
++    if (syncflag >= END_WMIFLAG) {
++        return A_EINVAL;
++    }
++
++    if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
++        /*
++         * We want to make sure all data currently queued is transmitted before
++         * the cmd execution.  Establish a new sync point.
++         */
++        wmi_sync_point(wmip);
++    }
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    cHdr->commandId = cmdId;
++
++    /*
++     * Send cmd, some via control pipe, others via data pipe
++     */
++    if (IS_LONG_CMD(cmdId)) {
++        wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE);
++        // TODO ... these can now go through the control endpoint via HTC 2.0
++        streamID = WMI_BEST_EFFORT_PRI;
++    }
++    A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID);
++
++    if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
++        /*
++         * We want to make sure all new data queued waits for the command to
++         * execute. Establish a new sync point.
++         */
++        wmi_sync_point(wmip);
++    }
++    return (A_OK);
++#undef IS_LONG_CMD
++}
++
++A_STATUS
++wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
++                  WMI_SYNC_FLAG syncflag)
++{
++    WMIX_CMD_HDR     *cHdr;
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
++    cHdr->commandId = cmdId;
++
++    return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag);
++}
++
++A_STATUS
++wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType,
++                DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode,
++                CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen,
++                CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen,
++                int ssidLength, A_UCHAR *ssid,
++                A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags)
++{
++    void *osbuf;
++    WMI_CONNECT_CMD *cc;
++
++    if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) {
++        return A_EINVAL;
++    }
++    if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD));
++
++    cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cc, sizeof(*cc));
++
++    A_MEMCPY(cc->ssid, ssid, ssidLength);
++    cc->ssidLength          = ssidLength;
++    cc->networkType         = netType;
++    cc->dot11AuthMode       = dot11AuthMode;
++    cc->authMode            = authMode;
++    cc->pairwiseCryptoType  = pairwiseCrypto;
++    cc->pairwiseCryptoLen   = pairwiseCryptoLen;
++    cc->groupCryptoType     = groupCrypto;
++    cc->groupCryptoLen      = groupCryptoLen;
++    cc->channel             = channel;
++    cc->ctrl_flags          = ctrl_flags;
++
++    if (bssid != NULL) {
++        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
++    }
++    if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) {
++        return(A_ERROR);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel)
++{
++    void *osbuf;
++    WMI_RECONNECT_CMD *cc;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD));
++
++    cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cc, sizeof(*cc));
++
++    cc->channel = channel;
++
++    if (bssid != NULL) {
++        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_disconnect_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++    A_STATUS status;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    /* Bug fix for 24817(elevator bug) - the disconnect command does not
++       need to do a SYNC before.*/
++    status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID,
++                         NO_SYNC_WMIFLAG));
++
++    return status;
++}
++
++A_STATUS
++wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
++                  A_BOOL forceFgScan, A_BOOL isLegacy,
++                  A_UINT32 homeDwellTime, A_UINT32 forceScanInterval)
++{
++    void *osbuf;
++    WMI_START_SCAN_CMD *sc;
++
++    if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*sc));
++
++    sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf));
++    sc->scanType = scanType;
++    sc->forceFgScan = forceFgScan;
++    sc->isLegacy = isLegacy;
++    sc->homeDwellTime = homeDwellTime;
++    sc->forceScanInterval = forceScanInterval;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
++                   A_UINT16 fg_end_sec, A_UINT16 bg_sec,
++                   A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec,
++                   A_UINT16 pas_chdw_msec,
++                   A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
++                   A_UINT32 max_dfsch_act_time)
++{
++    void *osbuf;
++    WMI_SCAN_PARAMS_CMD *sc;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*sc));
++
++    sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(sc, sizeof(*sc));
++    sc->fg_start_period  = fg_start_sec;
++    sc->fg_end_period    = fg_end_sec;
++    sc->bg_period        = bg_sec;
++    sc->minact_chdwell_time = minact_chdw_msec;
++    sc->maxact_chdwell_time = maxact_chdw_msec;
++    sc->pas_chdwell_time = pas_chdw_msec;
++    sc->shortScanRatio   = shScanRatio;
++    sc->scanCtrlFlags    = scanCtrlFlags;
++    sc->max_dfsch_act_time = max_dfsch_act_time;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask)
++{
++    void *osbuf;
++    WMI_BSS_FILTER_CMD *cmd;
++
++    if (filter >= LAST_BSS_FILTER) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->bssFilter = filter;
++    cmd->ieMask = ieMask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
++                   A_UINT8 ssidLength, A_UCHAR *ssid)
++{
++    void *osbuf;
++    WMI_PROBED_SSID_CMD *cmd;
++
++    if (index > MAX_PROBED_SSID_INDEX) {
++        return A_EINVAL;
++    }
++    if (ssidLength > sizeof(cmd->ssid)) {
++        return A_EINVAL;
++    }
++    if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) {
++        return A_EINVAL;
++    }
++    if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->entryIndex = index;
++    cmd->flag       = flag;
++    cmd->ssidLength = ssidLength;
++    A_MEMCPY(cmd->ssid, ssid, ssidLength);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons)
++{
++    void *osbuf;
++    WMI_LISTEN_INT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->listenInterval = listenInterval;
++    cmd->numBeacons = listenBeacons;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons)
++{
++    void *osbuf;
++    WMI_BMISS_TIME_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->bmissTime = bmissTime;
++    cmd->numBeacons =  bmissBeacons;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
++                     A_UINT8 ieLen, A_UINT8 *ieInfo)
++{
++    void *osbuf;
++    WMI_SET_ASSOC_INFO_CMD *cmd;
++    A_UINT16 cmdLen;
++
++    cmdLen = sizeof(*cmd) + ieLen - 1;
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++
++    cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, cmdLen);
++    cmd->ieType = ieType;
++    cmd->bufferSize = ieLen;
++    A_MEMCPY(cmd->assocInfo, ieInfo, ieLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode)
++{
++    void *osbuf;
++    WMI_POWER_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->powerMode = powerMode;
++    wmip->wmi_powerMode = powerMode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
++                   A_UINT16 atim_windows, A_UINT16 timeout_value)
++{
++    void *osbuf;
++    WMI_IBSS_PM_CAPS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->power_saving = pmEnable;
++    cmd->ttl = ttl;
++    cmd->atim_windows = atim_windows;
++    cmd->timeout_value = timeout_value;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
++                 A_UINT16 psPollNum, A_UINT16 dtimPolicy)
++{
++    void *osbuf;
++    WMI_POWER_PARAMS_CMD *pm;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*pm));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*pm));
++
++    pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(pm, sizeof(*pm));
++    pm->idle_period   = idlePeriod;
++    pm->pspoll_number = psPollNum;
++    pm->dtim_policy   = dtimPolicy;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout)
++{
++    void *osbuf;
++    WMI_DISC_TIMEOUT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->disconnectTimeout = timeout;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType,
++               A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC,
++               A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
++               WMI_SYNC_FLAG sync_flag)
++{
++    void *osbuf;
++    WMI_ADD_CIPHER_KEY_CMD *cmd;
++
++    if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) ||
++        (keyMaterial == NULL))
++    {
++        return A_EINVAL;
++    }
++
++    if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keyIndex = keyIndex;
++    cmd->keyType  = keyType;
++    cmd->keyUsage = keyUsage;
++    cmd->keyLength = keyLength;
++    A_MEMCPY(cmd->key, keyMaterial, keyLength);
++    if (NULL != keyRSC) {
++        A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC));
++    }
++    cmd->key_op_ctrl = key_op_ctrl;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag));
++}
++
++A_STATUS
++wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk)
++{
++    void *osbuf;
++    WMI_ADD_KRK_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_delete_krk_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex)
++{
++    void *osbuf;
++    WMI_DELETE_CIPHER_KEY_CMD *cmd;
++
++    if (keyIndex > WMI_MAX_KEY_INDEX) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keyIndex = keyIndex;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
++                 A_BOOL set)
++{
++    void *osbuf;
++    WMI_SET_PMKID_CMD *cmd;
++
++    if (bssid == NULL) {
++        return A_EINVAL;
++    }
++
++    if ((set == TRUE) && (pmkId == NULL)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++    if (set == TRUE) {
++        A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid));
++        cmd->enable = PMKID_ENABLE;
++    } else {
++        A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid));
++        cmd->enable = PMKID_DISABLE;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en)
++{
++    void *osbuf;
++    WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_akmp_params_cmd(struct wmi_t *wmip,
++                        WMI_SET_AKMP_PARAMS_CMD *akmpParams)
++{
++    void *osbuf;
++    WMI_SET_AKMP_PARAMS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++    cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->akmpInfo = akmpParams->akmpInfo;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
++                       WMI_SET_PMKID_LIST_CMD *pmkInfo)
++{
++    void *osbuf;
++    WMI_SET_PMKID_LIST_CMD *cmd;
++    A_UINT16 cmdLen;
++    A_UINT8 i;
++
++    cmdLen = sizeof(pmkInfo->numPMKID) +
++             pmkInfo->numPMKID * sizeof(WMI_PMKID);
++
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++    cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->numPMKID = pmkInfo->numPMKID;
++
++    for (i = 0; i < cmd->numPMKID; i++) {
++        A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i],
++                 WMI_PMKID_LEN);
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_pmkid_list_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID)
++{
++    WMI_DATA_HDR     *dtHdr;
++
++    A_ASSERT(streamID != WMI_CONTROL_PRI);
++    A_ASSERT(osbuf != NULL);
++
++    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
++        return A_NO_MEMORY;
++    }
++
++    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
++    dtHdr->info =
++      (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID));
++
++    return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID));
++}
++
++typedef struct _WMI_DATA_SYNC_BUFS {
++    A_UINT8            trafficClass;
++    void               *osbuf;
++}WMI_DATA_SYNC_BUFS;
++
++static A_STATUS
++wmi_sync_point(struct wmi_t *wmip)
++{
++      void *cmd_osbuf;
++    WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC];
++      A_UINT8 i,numPriStreams=0;
++      A_STATUS status;
++
++      A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    memset(dataSyncBufs,0,sizeof(dataSyncBufs));
++
++    /* lock out while we walk through the priority list and assemble our local array */
++    LOCK_WMI(wmip);
++
++    for (i=0; i < WMM_NUM_AC ; i++) {
++              if (wmip->wmi_fatPipeExists & (1 << i)) {
++            numPriStreams++;
++            dataSyncBufs[numPriStreams-1].trafficClass = i;
++        }
++    }
++
++    UNLOCK_WMI(wmip);
++
++    /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */
++
++    do {
++          /*
++           * We allocate all network buffers needed so we will be able to
++           * send all required frames.
++           */
++          cmd_osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++          if (cmd_osbuf == NULL) {
++                  status = A_NO_MEMORY;
++            break;
++          }
++
++          for (i=0; i < numPriStreams ; i++) {
++              dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0);
++            if (dataSyncBufs[i].osbuf == NULL) {
++                status = A_NO_MEMORY;
++                break;
++            }
++          } //end for
++
++          /*
++           * Send sync cmd followed by sync data messages on all endpoints being
++           * used
++           */
++          status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID,
++                                                NO_SYNC_WMIFLAG);
++
++        if (A_FAILED(status)) {
++            break;
++        }
++            /* cmd buffer sent, we no longer own it */
++        cmd_osbuf = NULL;
++
++              for(i=0; i < numPriStreams; i++) {
++            A_ASSERT(dataSyncBufs[i].osbuf != NULL);
++
++            status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf,
++                        WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass));
++
++            if (A_FAILED(status)) {
++                break;
++            }
++            /* we don't own this buffer anymore, NULL it out of the array so it
++             * won't get cleaned up */
++            dataSyncBufs[i].osbuf = NULL;
++              } //end for
++
++    } while(FALSE);
++
++    /* free up any resources left over (possibly due to an error) */
++
++    if (cmd_osbuf != NULL) {
++        A_NETBUF_FREE(cmd_osbuf);
++    }
++
++    for (i = 0; i < numPriStreams; i++) {
++        if (dataSyncBufs[i].osbuf != NULL) {
++            A_NETBUF_FREE(dataSyncBufs[i].osbuf);
++        }
++    }
++
++      return (status);
++}
++
++A_STATUS
++wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params)
++{
++    void *osbuf;
++    WMI_CREATE_PSTREAM_CMD *cmd;
++      A_UINT16 activeTsids=0;
++    A_UINT8 fatPipeExistsForAC=0;
++
++    /* Validate all the parameters. */
++    if( !((params->userPriority < 8) &&
++         (params->userPriority <= 0x7) &&
++         (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass)  &&
++         (params->trafficDirection == UPLINK_TRAFFIC ||
++            params->trafficDirection == DNLINK_TRAFFIC ||
++            params->trafficDirection == BIDIR_TRAFFIC) &&
++         (params->trafficType == TRAFFIC_TYPE_APERIODIC ||
++            params->trafficType == TRAFFIC_TYPE_PERIODIC ) &&
++         (params->voicePSCapability == DISABLE_FOR_THIS_AC  ||
++            params->voicePSCapability == ENABLE_FOR_THIS_AC ||
++            params->voicePSCapability == ENABLE_FOR_ALL_AC) &&
++         (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) )
++    {
++        return  A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Sending create_pstream_cmd: ac=%d    tsid:%d\n", DBGARG,
++        params->trafficClass, params->tsid));
++
++    cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    A_MEMCPY(cmd, params, sizeof(*cmd));
++
++        /* this is an implicitly created Fat pipe */
++    if (params->tsid == WMI_IMPLICIT_PSTREAM) {
++        LOCK_WMI(wmip);
++        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
++        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
++        UNLOCK_WMI(wmip);
++    } else {
++            /* this is an explicitly created thin stream within a fat pipe */
++        LOCK_WMI(wmip);
++        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
++        activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass];
++        wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid);
++            /* if a thinstream becomes active, the fat pipe automatically
++            * becomes active
++            */
++        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
++        UNLOCK_WMI(wmip);
++    }
++
++        /* Indicate activty change to driver layer only if this is the
++         * first TSID to get created in this AC explicitly or an implicit
++         * fat pipe is getting created.
++         */
++    if (!fatPipeExistsForAC) {
++        A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass);
++    }
++
++    /* mike: should be SYNC_BEFORE_WMIFLAG */
++    return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid)
++{
++    void *osbuf;
++    WMI_DELETE_PSTREAM_CMD *cmd;
++    A_STATUS status;
++      A_UINT16 activeTsids=0;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->trafficClass = trafficClass;
++    cmd->tsid = tsid;
++
++    LOCK_WMI(wmip);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++        /* Check if the tsid was created & exists */
++    if (!(activeTsids & (1<<tsid))) {
++
++        A_DPRINTF(DBG_WMI,
++        (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass));
++            /* TODO: return a more appropriate err code */
++        return A_ERROR;
++    }
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid));
++
++    status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID,
++                         SYNC_BEFORE_WMIFLAG));
++
++    LOCK_WMI(wmip);
++    wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++
++        /* Indicate stream inactivity to driver layer only if all tsids
++         * within this AC are deleted.
++         */
++    if(!activeTsids) {
++        A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass);
++        wmip->wmi_fatPipeExists &= ~(1<<trafficClass);
++    }
++
++    return status;
++}
++
++/*
++ * used to set the bit rate.  rate is in Kbps.  If rate == -1
++ * then auto selection is used.
++ */
++A_STATUS
++wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate)
++{
++    void *osbuf;
++    WMI_BIT_RATE_CMD *cmd;
++    A_INT8 index;
++
++    if (rate != -1) {
++        index = wmi_validate_bitrate(wmip, rate);
++        if(index == A_EINVAL){
++            return A_EINVAL;
++        }
++    } else {
++        index = -1;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->rateIndex = index;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_bitrate_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++/*
++ * Returns TRUE iff the given rate index is legal in the current PHY mode.
++ */
++A_BOOL
++wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex)
++{
++    WMI_PHY_MODE phyMode = wmip->wmi_phyMode;
++    A_BOOL isValid = TRUE;
++    switch(phyMode) {
++        case WMI_11A_MODE:
++            if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11B_MODE:
++            if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11GONLY_MODE:
++            if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        case WMI_11G_MODE:
++        case WMI_11AG_MODE:
++            if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) {
++                isValid = FALSE;
++            }
++            break;
++
++        default:
++            A_ASSERT(FALSE);
++            break;
++    }
++
++    return isValid;
++}
++
++A_INT8
++wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate)
++{
++    A_INT8 i;
++    if (rate != -1)
++    {
++        for (i=0;;i++)
++        {
++            if (wmi_rateTable[(A_UINT32) i] == 0) {
++                return A_EINVAL;
++            }
++            if (wmi_rateTable[(A_UINT32) i] == rate) {
++                break;
++            }
++        }
++    }
++    else{
++     i = -1;
++    }
++
++    if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) {
++        return A_EINVAL;
++    }
++
++    return i;
++}
++
++A_STATUS
++wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask)
++{
++    void *osbuf;
++    WMI_FIX_RATES_CMD *cmd;
++    A_UINT32 rateIndex;
++
++    /* Make sure all rates in the mask are valid in the current PHY mode */
++    for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) {
++       if((1 << rateIndex) & (A_UINT32)fixRatesMask) {
++            if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) {
++                A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG));
++                return A_EINVAL;
++            }
++       }
++    }
++
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++
++    cmd->fixRateMask = fixRatesMask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_ratemask_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_channelList_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++/*
++ * used to generate a wmi sey channel Parameters cmd.
++ * mode should always be specified and corresponds to the phy mode of the
++ * wlan.
++ * numChan should alway sbe specified. If zero indicates that all available
++ * channels should be used.
++ * channelList is an array of channel frequencies (in Mhz) which the radio
++ * should limit its operation to.  It should be NULL if numChan == 0.  Size of
++ * array should correspond to numChan entries.
++ */
++A_STATUS
++wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
++                          WMI_PHY_MODE mode, A_INT8 numChan,
++                          A_UINT16 *channelList)
++{
++    void *osbuf;
++    WMI_CHANNEL_PARAMS_CMD *cmd;
++    A_INT8 size;
++
++    size = sizeof (*cmd);
++
++    if (numChan) {
++        if (numChan > WMI_MAX_CHANNELS) {
++            return A_EINVAL;
++        }
++        size += sizeof(A_UINT16) * (numChan - 1);
++    }
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    wmip->wmi_phyMode = mode;
++    cmd->scanParam   = scanParam;
++    cmd->phyMode     = mode;
++    cmd->numChannels = numChan;
++    A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_rssi_threshold_params(struct wmi_t *wmip,
++                              WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val ||
++        rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val ||
++        rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val ||
++        rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val ||
++        rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val ||
++        rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val ||
++        rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val ||
++        rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val ||
++        rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val ||
++        rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip,
++                              WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SET_HOST_SLEEP_MODE_CMD *cmd;
++
++    if( hostModeCmd->awake == hostModeCmd->asleep) {
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_wow_mode_cmd(struct wmi_t *wmip,
++                              WMI_SET_WOW_MODE_CMD *wowModeCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SET_WOW_MODE_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_get_wow_list_cmd(struct wmi_t *wmip,
++                              WMI_GET_WOW_LIST_CMD *wowListCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_GET_WOW_LIST_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++static A_STATUS
++wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++    WMI_GET_WOW_LIST_REPLY *reply;
++
++    if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_GET_WOW_LIST_REPLY *)datap;
++
++    A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters,
++                          reply);
++
++    return A_OK;
++}
++
++A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
++                                 WMI_ADD_WOW_PATTERN_CMD *addWowCmd,
++                                 A_UINT8* pattern, A_UINT8* mask,
++                                 A_UINT8 pattern_size)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_ADD_WOW_PATTERN_CMD *cmd;
++    A_UINT8 *filter_mask = NULL;
++
++    size = sizeof (*cmd);
++
++    size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8));
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->filter_list_id = addWowCmd->filter_list_id;
++    cmd->filter_offset = addWowCmd->filter_offset;
++    cmd->filter_size = addWowCmd->filter_size;
++
++    A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size);
++
++    filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size);
++    A_MEMCPY(filter_mask, mask, addWowCmd->filter_size);
++
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
++                              WMI_DEL_WOW_PATTERN_CMD *delWowCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_DEL_WOW_PATTERN_CMD *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID,
++                            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_set_snr_threshold_params(struct wmi_t *wmip,
++                             WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_SNR_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val ||
++        snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val ||
++        snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val ||
++        snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val ||
++        snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val ||
++        snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_clr_rssi_snr(struct wmi_t *wmip)
++{
++    void    *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(int));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_lq_threshold_params(struct wmi_t *wmip,
++                             WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_LQ_THRESHOLD_PARAMS_CMD *cmd;
++    /* These values are in ascending order */
++    if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val ||
++        lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val ||
++        lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val ||
++        lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val ||
++        lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val ||
++        lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) {
++
++        return A_EINVAL;
++    }
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++    A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask)
++{
++    void    *osbuf;
++    A_INT8  size;
++    WMI_TARGET_ERROR_REPORT_BITMASK *cmd;
++
++    size = sizeof (*cmd);
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    cmd->bitmask = mask;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
++                            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source)
++{
++    void *osbuf;
++    WMIX_HB_CHALLENGE_RESP_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->cookie = cookie;
++    cmd->source = source;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID,
++                              NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
++                            A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
++                            A_UINT32 valid)
++{
++    void *osbuf;
++    WMIX_DBGLOG_CFG_MODULE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->config.cfgmmask = mmask;
++    cmd->config.cfgtsr = tsr;
++    cmd->config.cfgrep = rep;
++    cmd->config.cfgsize = size;
++    cmd->config.cfgvalid = valid;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID,
++                              NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_stats_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid)
++{
++    void *osbuf;
++    WMI_ADD_BAD_AP_CMD *cmd;
++
++    if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->badApIndex = apIndex;
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex)
++{
++    void *osbuf;
++    WMI_DELETE_BAD_AP_CMD *cmd;
++
++    if (apIndex > WMI_MAX_BAD_AP_INDEX) {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->badApIndex = apIndex;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM)
++{
++    void *osbuf;
++    WMI_SET_TX_PWR_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->dbM = dbM;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_txPwr_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on)
++{
++      WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
++                                      WMI_SHORTSCANRATIO_DEFAULT,
++                                      DEFAULT_SCAN_CTRL_FLAGS,
++                                      0};
++
++      if (on) {
++              /* Enable foreground scanning */
++                if (wmi_scanparams_cmd(wmip, scParams.fg_start_period,
++                                       scParams.fg_end_period,
++                                       scParams.bg_period,
++                                       scParams.minact_chdwell_time,
++                                       scParams.maxact_chdwell_time,
++                                       scParams.pas_chdwell_time,
++                                       scParams.shortScanRatio,
++                                       scParams.scanCtrlFlags,
++                                       scParams.max_dfsch_act_time) != A_OK) {
++                      return -EIO;
++              }
++      } else {
++              wmi_disconnect_cmd(wmip);
++              if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0,
++                                     0, 0, 0, 0xFF, 0) != A_OK) {
++                      return -EIO;
++              }
++      }
++
++      return A_OK;
++}
++
++
++A_UINT16
++wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass)
++{
++      A_UINT16 activeTsids=0;
++
++    LOCK_WMI(wmip);
++    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
++    UNLOCK_WMI(wmip);
++
++    return activeTsids;
++}
++
++A_STATUS
++wmi_get_roam_tbl_cmd(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType)
++{
++    void *osbuf;
++    A_UINT32 size = sizeof(A_UINT8);
++    WMI_TARGET_ROAM_DATA *cmd;
++
++    osbuf = A_NETBUF_ALLOC(size);      /* no payload */
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf));
++    cmd->roamDataType = roamDataType;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
++                      A_UINT8 size)
++{
++    void *osbuf;
++    WMI_SET_ROAM_CTRL_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    A_MEMCPY(cmd, p, size);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
++                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
++                            A_UINT8 size)
++{
++    void *osbuf;
++    WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd;
++
++    /* These timers can't be zero */
++    if(!pCmd->psPollTimeout || !pCmd->triggerTimeout ||
++       !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD ||
++         pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) ||
++       !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD ||
++         pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD))
++        return A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, size);
++
++    cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, size);
++
++    A_MEMCPY(cmd, pCmd, size);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++#ifdef CONFIG_HOST_GPIO_SUPPORT
++/* Send a command to Target to change GPIO output pins. */
++A_STATUS
++wmi_gpio_output_set(struct wmi_t *wmip,
++                    A_UINT32 set_mask,
++                    A_UINT32 clear_mask,
++                    A_UINT32 enable_mask,
++                    A_UINT32 disable_mask)
++{
++    void *osbuf;
++    WMIX_GPIO_OUTPUT_SET_CMD *output_set;
++    int size;
++
++    size = sizeof(*output_set);
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG,
++        set_mask, clear_mask, enable_mask, disable_mask));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    output_set->set_mask                   = set_mask;
++    output_set->clear_mask                 = clear_mask;
++    output_set->enable_mask                = enable_mask;
++    output_set->disable_mask               = disable_mask;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target requesting state of the GPIO input pins */
++A_STATUS
++wmi_gpio_input_get(struct wmi_t *wmip)
++{
++    void *osbuf;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    osbuf = A_NETBUF_ALLOC(0);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target that changes the value of a GPIO register. */
++A_STATUS
++wmi_gpio_register_set(struct wmi_t *wmip,
++                      A_UINT32 gpioreg_id,
++                      A_UINT32 value)
++{
++    void *osbuf;
++    WMIX_GPIO_REGISTER_SET_CMD *register_set;
++    int size;
++
++    size = sizeof(*register_set);
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    register_set->gpioreg_id               = gpioreg_id;
++    register_set->value                    = value;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target to fetch the value of a GPIO register. */
++A_STATUS
++wmi_gpio_register_get(struct wmi_t *wmip,
++                      A_UINT32 gpioreg_id)
++{
++    void *osbuf;
++    WMIX_GPIO_REGISTER_GET_CMD *register_get;
++    int size;
++
++    size = sizeof(*register_get);
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf));
++
++    register_get->gpioreg_id               = gpioreg_id;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++/* Send a command to the Target acknowledging some GPIO interrupts. */
++A_STATUS
++wmi_gpio_intr_ack(struct wmi_t *wmip,
++                  A_UINT32 ack_mask)
++{
++    void *osbuf;
++    WMIX_GPIO_INTR_ACK_CMD *intr_ack;
++    int size;
++
++    size = sizeof(*intr_ack);
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf));
++
++    intr_ack->ack_mask               = ack_mask;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++#endif /* CONFIG_HOST_GPIO_SUPPORT */
++
++A_STATUS
++wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin,
++                          A_UINT8 eCWmax, A_UINT8 aifsn)
++{
++    void *osbuf;
++    WMI_SET_ACCESS_PARAMS_CMD *cmd;
++
++    if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) ||
++        (aifsn > WMI_MAX_AIFSN_ACPARAM))
++    {
++        return A_EINVAL;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->txop   = txop;
++    cmd->eCWmin = eCWmin;
++    cmd->eCWmax = eCWmax;
++    cmd->aifsn  = aifsn;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
++                         A_UINT8 trafficClass, A_UINT8 maxRetries,
++                         A_UINT8 enableNotify)
++{
++    void *osbuf;
++    WMI_SET_RETRY_LIMITS_CMD *cmd;
++
++    if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) &&
++        (frameType != DATA_FRAMETYPE))
++    {
++        return A_EINVAL;
++    }
++
++    if (maxRetries > WMI_MAX_RETRIES) {
++        return A_EINVAL;
++    }
++
++    if (frameType != DATA_FRAMETYPE) {
++        trafficClass = 0;
++    }
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf));
++    cmd->frameType    = frameType;
++    cmd->trafficClass = trafficClass;
++    cmd->maxRetries   = maxRetries;
++    cmd->enableNotify = enableNotify;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++void
++wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid)
++{
++    if (bssid != NULL) {
++        A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN);
++    }
++}
++
++A_STATUS
++wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode)
++{
++    void *osbuf;
++    WMI_SET_OPT_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->optMode = optMode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID,
++                         SYNC_BOTH_WMIFLAG));
++}
++
++A_STATUS
++wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
++                      A_UINT8 frmType,
++                      A_UINT8 *dstMacAddr,
++                      A_UINT8 *bssid,
++                      A_UINT16 optIEDataLen,
++                      A_UINT8 *optIEData)
++{
++    void *osbuf;
++    WMI_OPT_TX_FRAME_CMD *cmd;
++    osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd)));
++
++    cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1));
++
++    cmd->frmType    = frmType;
++    cmd->optIEDataLen   = optIEDataLen;
++    //cmd->optIEData     = (A_UINT8 *)((int)cmd + sizeof(*cmd));
++    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
++    A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr));
++    A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl)
++{
++    void *osbuf;
++    WMI_BEACON_INT_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->beaconInterval = intvl;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++
++A_STATUS
++wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize)
++{
++    void *osbuf;
++    WMI_SET_VOICE_PKT_SIZE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->voicePktSize = voicePktSize;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++
++A_STATUS
++wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen)
++{
++    void *osbuf;
++    WMI_SET_MAX_SP_LEN_CMD *cmd;
++
++    /* maxSPLen is a two-bit value. If user trys to set anything
++     * other than this, then its invalid
++     */
++    if(maxSPLen & ~0x03)
++        return  A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->maxSPLen = maxSPLen;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_UINT8
++convert_userPriority_to_trafficClass(A_UINT8 userPriority)
++{
++        return  (up_to_ac[userPriority & 0x7]);
++}
++
++A_UINT8
++wmi_get_power_mode_cmd(struct wmi_t *wmip)
++{
++    return wmip->wmi_powerMode;
++}
++
++A_STATUS
++wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance)
++{
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++static A_STATUS
++wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
++{
++
++   A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++   A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len);
++
++   return A_OK;
++}
++
++#endif /* CONFIG_HOST_TCMD_SUPPORT*/
++
++A_STATUS
++wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
++{
++    void *osbuf;
++    WMI_SET_AUTH_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->mode = mode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
++{
++    void *osbuf;
++    WMI_SET_REASSOC_MODE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->mode = mode;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status)
++{
++    void *osbuf;
++    WMI_SET_LPREAMBLE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold)
++{
++    void *osbuf;
++    WMI_SET_RTS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->threshold = threshold;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status)
++{
++    void *osbuf;
++    WMI_SET_WMM_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID,
++            NO_SYNC_WMIFLAG));
++
++}
++
++A_STATUS
++wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg)
++{
++    void *osbuf;
++    WMI_SET_WMM_TXOP_CMD *cmd;
++
++    if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) )
++        return A_EINVAL;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->txopEnable = cfg;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID,
++            NO_SYNC_WMIFLAG));
++
++}
++
++#ifdef CONFIG_HOST_TCMD_SUPPORT
++/* WMI  layer doesn't need to know the data type of the test cmd.
++   This would be beneficial for customers like Qualcomm, who might
++   have different test command requirements from differnt manufacturers
++ */
++A_STATUS
++wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len)
++{
++    void *osbuf;
++    char *data;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
++
++    osbuf= A_NETBUF_ALLOC(len);
++    if(osbuf == NULL)
++    {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, len);
++    data = A_NETBUF_DATA(osbuf);
++    A_MEMCPY(data, buf, len);
++
++    return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID,
++         NO_SYNC_WMIFLAG));
++}
++
++#endif
++
++A_STATUS
++wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status)
++{
++    void *osbuf;
++    WMI_SET_BT_STATUS_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->streamType = streamType;
++    cmd->status = status;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd)
++{
++    void *osbuf;
++    WMI_SET_BT_PARAMS_CMD* alloc_cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(alloc_cmd, sizeof(*cmd));
++    A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd));
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID,
++            NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_get_keepalive_configured(struct wmi_t *wmip)
++{
++    void *osbuf;
++    WMI_GET_KEEPALIVE_CMD *cmd;
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++    cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_UINT8
++wmi_get_keepalive_cmd(struct wmi_t *wmip)
++{
++    return wmip->wmi_keepaliveInterval;
++}
++
++A_STATUS
++wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval)
++{
++    void *osbuf;
++    WMI_SET_KEEPALIVE_CMD *cmd;
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*cmd));
++
++    cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd->keepaliveInterval = keepaliveInterval;
++    wmip->wmi_keepaliveInterval = keepaliveInterval;
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen,
++                  A_UINT8 *ieInfo)
++{
++    void *osbuf;
++    WMI_SET_APPIE_CMD *cmd;
++    A_UINT16 cmdLen;
++
++    if (ieLen > WMI_MAX_IE_LEN) {
++        return A_ERROR;
++    }
++    cmdLen = sizeof(*cmd) + ieLen - 1;
++    osbuf = A_NETBUF_ALLOC(cmdLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, cmdLen);
++
++    cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf));
++    A_MEMZERO(cmd, cmdLen);
++
++    cmd->mgmtFrmType = mgmtFrmType;
++    cmd->ieLen = ieLen;
++    A_MEMCPY(cmd->ieInfo, ieInfo, ieLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_STATUS
++wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen)
++{
++    void *osbuf;
++    A_UINT8 *data;
++
++    osbuf = A_NETBUF_ALLOC(dataLen);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, dataLen);
++
++    data = A_NETBUF_DATA(osbuf);
++
++    A_MEMCPY(data, cmd, dataLen);
++
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG));
++}
++
++A_INT32
++wmi_get_rate(A_INT8 rateindex)
++{
++    if (rateindex == RATE_AUTO) {
++        return 0;
++    } else {
++        return(wmi_rateTable[(A_UINT32) rateindex]);
++    }
++}
++
++void
++wmi_node_return (struct wmi_t *wmip, bss_t *bss)
++{
++      if (NULL != bss)
++      {
++              wlan_node_return (&wmip->wmi_scan_table, bss);
++      }
++}
++
++bss_t *
++wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
++                                 A_UINT32 ssidLength, A_BOOL bIsWPA2)
++{
++      bss_t *node = NULL;
++    node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid,
++                                                         ssidLength, bIsWPA2);
++      return node;
++}
++
++void
++wmi_free_allnodes(struct wmi_t *wmip)
++{
++      wlan_free_allnodes(&wmip->wmi_scan_table);
++}
++
++bss_t *
++wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr)
++{
++      bss_t *ni=NULL;
++      ni=wlan_find_node(&wmip->wmi_scan_table,macaddr);
++      return ni;
++}
++
++A_STATUS
++wmi_dset_open_reply(struct wmi_t *wmip,
++                    A_UINT32 status,
++                    A_UINT32 access_cookie,
++                    A_UINT32 dset_size,
++                    A_UINT32 dset_version,
++                    A_UINT32 targ_handle,
++                    A_UINT32 targ_reply_fn,
++                    A_UINT32 targ_reply_arg)
++{
++    void *osbuf;
++    WMIX_DSETOPEN_REPLY_CMD *open_reply;
++
++    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip));
++
++    osbuf = A_NETBUF_ALLOC(sizeof(*open_reply));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    A_NETBUF_PUT(osbuf, sizeof(*open_reply));
++    open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
++
++    open_reply->status                   = status;
++    open_reply->targ_dset_handle         = targ_handle;
++    open_reply->targ_reply_fn            = targ_reply_fn;
++    open_reply->targ_reply_arg           = targ_reply_arg;
++    open_reply->access_cookie            = access_cookie;
++    open_reply->size                     = dset_size;
++    open_reply->version                  = dset_version;
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++
++static A_STATUS
++wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len)
++{
++    WMI_PMKID_LIST_REPLY *reply;
++    A_UINT32 expected_len;
++
++    if (len < sizeof(WMI_PMKID_LIST_REPLY)) {
++        return A_EINVAL;
++    }
++    reply = (WMI_PMKID_LIST_REPLY *)datap;
++    expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN;
++
++    if (len < expected_len) {
++        return A_EINVAL;
++    }
++
++    A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID,
++                           reply->pmkidList);
++
++    return A_OK;
++}
++
++#ifdef CONFIG_HOST_DSET_SUPPORT
++A_STATUS
++wmi_dset_data_reply(struct wmi_t *wmip,
++                    A_UINT32 status,
++                    A_UINT8 *user_buf,
++                    A_UINT32 length,
++                    A_UINT32 targ_buf,
++                    A_UINT32 targ_reply_fn,
++                    A_UINT32 targ_reply_arg)
++{
++    void *osbuf;
++    WMIX_DSETDATA_REPLY_CMD *data_reply;
++    int size;
++
++    size = sizeof(*data_reply) + length;
++
++    A_DPRINTF(DBG_WMI,
++        (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status));
++
++    osbuf = A_NETBUF_ALLOC(size);
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++    A_NETBUF_PUT(osbuf, size);
++    data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
++
++    data_reply->status                     = status;
++    data_reply->targ_buf                   = targ_buf;
++    data_reply->targ_reply_fn              = targ_reply_fn;
++    data_reply->targ_reply_arg             = targ_reply_arg;
++    data_reply->length                     = length;
++
++    if (status == A_OK) {
++        if (a_copy_from_user(data_reply->buf, user_buf, length)) {
++            return A_ERROR;
++        }
++    }
++
++    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID,
++                             NO_SYNC_WMIFLAG));
++}
++#endif /* CONFIG_HOST_DSET_SUPPORT */
++
++A_STATUS
++wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status)
++{
++    void *osbuf;
++    char *cmd;
++
++      wps_enable = status;
++
++    osbuf = a_netbuf_alloc(sizeof(1));
++    if (osbuf == NULL) {
++        return A_NO_MEMORY;
++    }
++
++    a_netbuf_put(osbuf, sizeof(1));
++
++    cmd = (char *)(a_netbuf_to_data(osbuf));
++
++    A_MEMZERO(cmd, sizeof(*cmd));
++    cmd[0] = (status?1:0);
++    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID,
++                         NO_SYNC_WMIFLAG));
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi_doc.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi_doc.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi_doc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi_doc.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,4421 @@
++/*
++ *
++ * Copyright (c) 2004-2007 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++
++#if 0
++Wireless Module Interface (WMI) Documentaion
++
++   This section describes the format and the usage model for WMI control and
++   data messages between the host and the AR6000-based targets. The header
++   file include/wmi.h contains all command and event manifest constants as
++   well as structure typedefs for each set of command and reply parameters.
++
++Data Frames
++
++   The data payload transmitted and received by the target follows RFC-1042
++   encapsulation and thus starts with an 802.2-style LLC-SNAP header. The
++   WLAN module completes 802.11 encapsulation of the payload, including the
++   MAC header, FCS, and WLAN security related fields. At the interface to the
++   message transport (HTC), a data frame is encapsulated in a WMI message.
++
++WMI Message Structure
++
++   The WMI protocol leverages an 802.3-style Ethernet header in communicating
++   the source and destination information between the host and the AR6000
++   modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In
++   addition, the WMI protocol adds a header to all data messages:
++
++    {
++    INT8    rssi
++                  The RSSI of the received packet and its units are shown in db above the
++                      noise floor, and the noise floor is shown in dbm.
++    UINT8   info
++                      Contains information on message type and user priority. Message type
++                      differentiates between a data packet and a synchronization message.
++    } WMI_DATA_HDR
++
++   User priority contains the 802.1d user priority info from host to target. Host
++   software translates the host Ethernet format to 802.3 format prior to Tx and
++   802.3 format to host format in the Rx direction. The host does not transmit the
++   FCS that follows the data. MsgType differentiates between a regular data
++   packet (msgType=0) and a synchronization message (msgType=1).
++
++Data Endpoints
++
++   The AR6000 chipset provides several data endpoints to support quality of
++   service (QoS) and maintains separate queues and separate DMA engines for
++   each data endpoint. A data endpoint can be bi-directional.
++
++   Best effort (BE) class traffic uses the default data endpoint (2). The host can
++   establish up to two additional data endpoints for other traffic classes. Once
++   such a data endpoint is established, it sends and receives corresponding QoS
++   traffic in a manner similar to the default data endpoint.
++
++   If QoS is desired over the interconnect, host software must classify each data
++   packet and place it on the appropriate data endpoint. The information
++   required to classify data is generally available in-band as an 802.1p/q style
++   tag or as the ToS field in the IP header. The information may also be available
++   out-of-band depending on the host DDI.
++
++Connection States
++
++   Table B-1 describes the AR6000 WLAN connection states:
++
++   Table B-1.  AR6000 Connection States
++
++Connection State
++    Description
++
++   DISCONNECTED
++    In this state, the AR6000 device is not connected to a wireless
++   network. The device is in this state after reset when it sends the
++   WIRELESS MODULE \93READY\94 EVENT, after it processes a
++   DISCONNECT command, and when it loses its link with the
++   access point (AP) that it was connected to. The device signals a
++   transition to the DISCONNECTED state with a \93DISCONNECT\94
++   event.
++
++CONNECTED
++    In this state, the AR6000 device is connected to wireless networks.
++   The device enters this state after successfully processing a
++   CONNECT, which establishes a connection with a wireless
++   network. The device signals a transition to the CONNECTED state
++   with a \93CONNECT\94 event.
++
++
++Message Types
++
++   WMI uses commands, replies, and events for the control and configuration of
++   the AR6000 device. The control protocol is asynchronous. Table B-2 describes
++   AR6000 message types:
++
++Table B-2.  AR6000 Message Types
++
++Message Type
++    Description
++
++Commands
++    Control messages that flow from the host to the device
++
++Replies/Events
++    Control messages that flow from the device to the host.
++
++   The device issues a reply to some WMI commands, but not to others.
++   The payload in a reply is command-specific, and some commands do
++   not trigger a reply message at all. Events are control messages issued
++   by the device to signal the occurrence of an asynchronous event.
++
++
++WMI Message Format
++
++   All WMI control commands, replies and events use the header format:
++
++   WMI_CMD_HDR Header Format
++   {
++        UINT16 id
++                 This 16-bit constant identifies which WMI command the host is issuing,
++                 which command the target is replying to, or which event has occurred.
++        WMI_CMD_HDR
++   }
++
++
++   A variable-size command-, reply-, or event-specific payload follows the
++   header. Over the interconnect, all fields in control messages (including
++   WMI_CMD_HDR and the command specific payload) use 32-bit little Endian
++   byte ordering and fields are packed. The AR6000 device always executes
++   commands in order, and the host may send multiple commands without
++   waiting for previous commands to complete. A majority of commands are
++   processed to completion once received. Other commands trigger a longer
++   duration activity whose completion is signaled to the host through an event.
++
++Command Restrictions
++
++   Some commands may only be issued when the AR6000 device is in a certain
++   state. The host is required to wait for an event signaling a state transition
++   before such a command can be issued. For example, if a command requires
++   the device to be in the CONNECTED state, then the host is required to wait
++   for a \93CONNECT\94 event before it issues that command.
++
++   The device ignores any commands inappropriate for its current state. If the
++   command triggers a reply, the device generates an error reply. Otherwise, the
++   device silently ignores the inappropriate command.
++
++Command and Data Synchronization
++
++   WMI provides a mechanism for a host to advise the device of necessary
++   synchronization between commands and data. The device implements
++   synchronization; no implicit synchronization exists between endpoints.
++
++   The host controls synchronization using the \93SYNCHRONIZE\94 command
++   over the control channel and synchronization messages over data channels.
++   The device stops each data channel upon receiving a synchronization message
++   on that channel, processing all data packets received prior to that message.
++   After the device receives synchronization messages for each data endpoint
++   and the \93SYNCHRONIZE\94 command, it resumes all channels.
++
++   When the host must guarantee a command executes before processing new
++   data packets, it first issues the command, then issues the \93SYNCHRONIZE\94
++   command and sends synchronization messages on data channels. When the
++   host must guarantee the device has processed all old data packets before a
++   processing a new command, it issues a \93SYNCHRONIZE\94 command and
++   synchronization messages on all data channels, then issues the desired
++   command.
++
++
++
++WMI Commands
++
++   ADD_BAD_AP
++    Cause the AR6000 device to avoid a particular AP
++   ADD_CIPHER_KEY
++    Add or replace any of the four AR6000 encryption keys
++   ADD_WOW_PATTERN
++    Used to add a pattern to the WoW pattern list
++   CLR_RSSI_SNR
++    Clear the current calculated RSSI and SNR value
++   CONNECT_CMD
++    Request that the AR6000 device establish a wireless connection
++        with the specified SSID
++   CREATE_PSTREAM
++    Create prioritized data endpoint between the host and device
++   DELETE_BAD_AP
++    Clear an entry in the bad AP table
++   DELETE_CIPHER_KEY
++    Delete a previously added cipher key
++   DELETE_PSTREAM
++    Delete a prioritized data endpoint
++   DELETE_WOW_PATTERN
++    Remove a pre-specified pattern from the WoW pattern list
++   EXTENSION
++    WMI message interface command
++   GET_BIT_RATE
++    Retrieve rate most recently used by the AR6000
++   GET_CHANNEL_LIST
++    Retrieve list of channels used by the AR6000
++   GET_FIXRATES
++    Retrieves the rate-mask set via the SET_FIXRATES command.
++   GET_PMKID_LIST_CMD
++    Retrieve the firmware list of PMKIDs
++   GET_ROAM_DATA
++    Internal use for data collection; available in special build only
++   GET_ROAM_TBL
++    Retrieve the roaming table maintained on the target
++   GET_TARGET_STATS
++    Request that the target send the statistics it maintains
++   GET_TX_PWR
++    Retrieve the current AR6000 device Tx power levels
++   GET_WOW_LIST
++    Retrieve the current list of WoW patterns
++   LQ_THRESHOLD_PARAMS
++    Set the link quality thresholds
++   OPT_TX_FRAME
++    Send a special frame (special feature)
++   RECONNECT
++    Request a reconnection to a BSS
++   RSSI_THRESHOLD_PARAMS
++    Configure how the AR6000 device monitors and reports signal
++       strength (RSSI) of the connected BSS
++   SCAN_PARAMS
++    Determine dwell time and changes scanned channels
++   SET_ACCESS_PARAMS
++    Set access parameters for the wireless network
++   SET_ADHOC_BSSID
++    Set the BSSID for an ad hoc network
++   SET_AKMP_PARAMS
++    Set multiPMKID mode
++   SET_APPIE
++    Add application-specified IE to a management frame
++   SET_ASSOC_INFO
++    Specify the IEs the device should add to association or
++        reassociation requests
++   SET_AUTH_MODE
++    Set 802.11 authentication mode of reconnection
++   SET_BEACON_INT
++    Set the beacon interval for an ad hoc network
++   SET_BIT_RATE
++    Set the AR6000 to a specific fixed bit rate
++   SET_BMISS_TIME
++    Set the beacon miss time
++   SET_BSS_FILTER
++    Inform the AR6000 of network types about which it wants to
++        receive information using a \93BSSINFO\94 event
++   SET_BT_PARAMS
++    Set the status of a Bluetooth stream (SCO or A2DP) or set
++        Bluetooth coexistence register parameters
++   SET_BT_STATUS
++    Set the status of a Bluetooth stream (SCO or A2DP)
++   SET_CHANNEL_PARAMETERS
++    Configure WLAN channel parameters
++   SET_DISC_TIMEOUT
++    Set the amount of time the AR6000 spends attempting to
++        reestablish a connection
++   SET_FIXRATES
++    Set the device to a specific fixed PHY rate (supported subset)
++   SET_HALPARAM
++    Internal AR6000 command to set certain hardware parameters
++   SET_HOST_SLEEP_MODE
++    Set the host mode to asleep or awake
++   SET_IBSS_PM_CAPS
++    Support a non-standard power management scheme for an
++        ad hoc network
++   SET_LISTEN_INT
++    Request a listen interval
++   SET_LPREAMBLE
++    Override the short preamble capability of the AR6000 device
++   SET_MAX_SP_LEN
++    Set the maximum service period
++   SET_OPT_MODE
++    Set the special mode on/off (special feature)
++   SET_PMKID
++    Set the pairwise master key ID (PMKID)
++   SET_PMKID_LIST_CMD
++    Configure the firmware list of PMKIDs
++   SET_POWER_MODE
++    Set guidelines on trade-off between power utilization
++   SET_POWER_PARAMS
++    Configure power parameters
++   SET_POWERSAVE_PARAMS
++    Set the two AR6000 power save timers
++   SET_PROBED_SSID
++    Provide list of SSIDs the device should seek
++   SET_REASSOC_MODE
++    Specify whether the disassociated frame should be sent upon
++        reassociation
++   SET_RETRY_LIMITS
++    Limit how many times the device tries to send a frame
++   SET_ROAM_CTRL
++    Control roaming behavior
++   SET_RTS
++    Determine when RTS should be sent
++   SET_SCAN_PARAMS
++    Set the AR6000 scan parameters
++   SET_TKIP_COUNTERMEASURES
++    Enable/disable reports of TKIP MIC errors
++   SET_TX_PWR
++    Specify the AR6000 device Tx power levels
++   SET_VOICE_PKT_SIZE
++    Set voice packet size
++   SET_WMM
++    Override the AR6000 WMM capability
++   SET_WMM_TXOP
++    Configure TxOP bursting when sending traffic to a WMM-
++    capable AP
++   SET_WOW_MODE
++    Enable/disable WoW mode
++   SET_WSC_STATUS
++    Enable/disable profile check in cserv when the WPS protocol
++    is in progress
++   SNR_THRESHOLD_PARAMS
++    Configure how the device monitors and reports SNR of BSS
++   START_SCAN
++    Start a long or short channel scan
++   SYNCHRONIZE
++    Force a synchronization point between command and data
++    paths
++   TARGET_REPORT_ERROR_BITMASK
++    Control \93ERROR_REPORT\94 events from the AR6000
++
++
++
++
++Name
++    ADD_BAD_AP
++
++Synopsis
++    The host uses this command to cause the AR6000 to avoid a particular AP. The
++    AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command
++    adds or replaces the specified entry in this bad AP table.
++
++    If the AR6000 are currently connected to the AP specified in this command, they
++    disassociate.
++
++Command
++    wmiconfig eth1 --badap <bssid> <badApIndex>
++
++Command Parameters
++    UINT8 badApIndex    Index [0...1] that identifies which entry in the
++                        bad AP table to use
++
++
++    UINT8 bssid[6]  MAC address of the AP to avoid
++
++Command Values
++    badApIndex = 0, 1    Entry in the bad AP table to use
++
++Reset Value
++    The bad AP table is cleared
++
++Restrictions
++    None
++
++See Also
++    \93DELETE_BAD_AP\94 on page B-13
++
++=====================================================================
++Name
++    ADD_CIPHER_KEY
++
++Synopsis
++    The host uses this command to add/replace any of four encryption keys on the
++    AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event
++    has been received by the host for all dot11Auth modes except for SHARED_AUTH.
++    When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY
++    command should be issued before the \93CONNECT\94 command.
++
++Command
++    wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage>
++                            <keyLength> <keyopctrl> <keyRSC> <key>
++
++Command Parameters
++    UINT8 keyIndex      Index (0...3) of the key to add/replace;
++                        uniquely identifies the key
++    UINT8 keyType    CRYPTO_TYPE
++    UINT8 keyUsage   Specifies usage parameters of the key when
++                     keyType = WEP_CRYPT
++    UINT8 keyLength  Length of the key in bytes
++    UINT8 keyOpCtrl  bit[0] = Initialize TSC (default),
++                     bit[1] = Initialize RSC
++    UINT8 keyRSC[8]  Key replay sequence counter (RSC) initial
++                     value the device should use
++    UINT8 key[32]    Key material used for this connection
++    Command Values
++    {
++        NONE_CRYPT = 1
++        WEP_CRYPT  = 2
++        TKIP_CRYPT = 3
++        AES_CRYPT  = 4
++        KEY_OP_INIT_TSC   0x01
++        KEY_OP_INIT_RSC   0x02
++        KEY_OP_INIT_VAL   0x03
++                Default is to Initialize the TSC
++        KEY_OP_VALID_MASK 0x04
++                Two operations defined
++    } CRYPTO_TYPE
++
++    {
++        PAIRWISE_USAGE  = 0  Set if the key is used for unicast traffic only
++        GROUP_USAGE     = 1  Set if the key is used to receive multicast
++                              traffic (also set for static WEP keys)
++        TX_USAGE        = 2  Set for the GROUP key used to transmit frames
++                All others are reserved
++    } KEY_USAGE
++
++Reset Value
++    The four available keys are disabled.
++
++Restrictions
++    The cipher should correspond to the encryption mode specified in the \93CONNECT\94
++    command.
++
++See Also
++    \93DELETE_CIPHER_KEY\94
++
++=====================================================================
++
++
++Name
++    ADD_WOW_PATTERN
++
++Synopsis
++    The host uses this command to add a pattern to the WoW pattern list; used for
++    pattern-matching for host wakeups by the WoW module. If the host mode is asleep
++    and WoW is enabled, all packets are matched against the existing WoW patterns. If a
++    packet matches any of the patterns specified, the target will wake up the host. All
++    non-matching packets are discarded by the target without being sent up to the host.
++
++Command
++    wmiconfig \96addwowpattern <list-id> <filter-size> <filter-offset>
++    <pattern> <mask>
++
++Command Parameters
++    A_UINT8  filter_list_id    ID of the list that is to include the new pattern
++    A_UINT8  filter_size       Size of the new pattern
++    A_UINT8  filter_offset     Offset at which the pattern matching for this
++                                new pattern should begin at
++    A_UINT8  filter[1]         Byte stream that contains both the pattern and
++                                the mask of the new WoW wake-up pattern
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined (default host mode is awake)
++
++Restrictions
++    None
++
++See Also
++    \93DELETE_WOW_PATTERN\94
++
++=====================================================================
++
++
++Name
++    CLR_RSSI_SNR
++
++Synopsis
++    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
++    running-average value. This command will clear the history and have a fresh start
++    for the running-average mechanism.
++
++Command
++    wmiconfig eth1 --cleanRssiSnr
++
++Command Parameters
++    None
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++Name
++    CONNECT_CMD
++
++Synopsis
++    New connect control information (connectCtrl) is added, with 32 possible modifiers.
++
++    CONNECT_SEND_REASSOC
++        Valid only for a host-controlled connection to a
++        particular AP. If this bit is set, a reassociation frame is
++        sent. If this bit is clear, an association request frame is
++        sent to the AP.
++
++    CONNECT_IGNORE_WPAx_GROUP_CIPHER
++        No group key is issued in the CONNECT command,
++        so use the group key advertised by the AP. In a target-
++        initiated roaming situation this allows a STA to roam
++        between APs that support different multicast ciphers.
++
++    CONNECT_PROFILE_MATCH_DONE
++        In a host-controlled connection case, it is possible that
++        during connect, firmware may not have the
++        information for a profile match (e.g, when the AP
++        supports hidden SSIDs and the device may not
++        transmit probe requests during connect). By setting
++        this bit in the connection control information, the
++        firmware waits for a beacon from the AP with the
++        BSSID supplied in the CONNECT command. No
++        additional profile checks are done.
++
++    CONNECT_IGNORE_AAC_BEACON
++        Ignore the Admission Capacity information in the
++        beacon of the AP
++
++    CONNECT_ASSOC_POLICY_USER
++        When set, the CONNECT_SEND_REASSOC setting
++        determines if an Assoc or Reassoc is sent to an AP
++
++Command
++    wmiconfig --setconnectctrl <ctrl flags bitmask>
++
++Command Parameters
++    typedef struct{
++    A_UINT8 networktype;
++    A_UINT8 dot11authmode;
++    A_UINT8 authmode;
++    A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/
++    A_UINT8 pairwiseCryptoLen;
++    A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/
++    A_UINT8 groupCryptoLen;
++    A_UINT8 ssidLength;
++    A_UCHAR ssid[WMI_MAX_SSID_LEN];
++    A_UINT16 channel;
++    A_UINT8 bssid[AUTH_MAC_LEN];
++    A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/
++    } WMI_CONNECT_CMD;
++
++    ctrl flags bitmask
++        = 0x0001 CONNECT_ASSOC_POLICY_USER
++            Assoc frames are sent using the policy specified by
++            the flag
++        = 0x0002 CONNECT_SEND_REASSOC
++            Send Reassoc frame while connecting, otherwise send
++            assoc frames
++        = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER
++            Ignore WPAx group cipher for WPA/WPA2
++        = 0x0008 CONNECT_PROFILE_MATCH_DONE
++            Ignore any profile check
++        = 0x0010 CONNECT_IGNORE_AAC_BEACON
++            Ignore the admission control information in the
++            beacon
++        ... CONNECT_CMD, continued
++        Command Values
++        typedef enum {
++            INFRA_NETWORK       = 0x01,
++            ADHOC_NETWORK       = 0x02,
++            ADHOC_CREATOR       = 0x04,
++        } NETWORK_TYPE;
++
++        typedef enum {
++            OPEN_AUTH           = 0x01,
++            SHARED_AUTH         = 0x02,
++            LEAP_AUTH           = 0x04,
++        } DOT11_AUTH_MODE;
++        typedef enum {
++            NONE_AUTH           = 0x01,
++            WPA_AUTH            = 0x02,
++            WPA_PSK_AUTH        = 0x03,
++            WPA2_AUTH           = 0x04,
++            WPA2_PSK_AUTH       = 0x05,
++            WPA_AUTH_CCKM       = 0x06,
++            WPA2_AUTH_CCKM      = 0x07,
++        } AUTH_MODE;
++        typedef enum {
++            NONE_CRYPT          = 0x01,
++            WEP_CRYPT           = 0x02,
++            TKIP_CRYPT          = 0x03,
++            AES_CRYPT           = 0x04,
++        } CRYPTO_TYPE;
++        typedef enum {
++            CONNECT_ASSOC_POLICY_USER = 0x0001,
++            CONNECT_SEND_REASSOC = 0x0002,
++            CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
++            CONNECT_PROFILE_MATCH_DONE = 0x0008,
++            CONNECT_IGNORE_AAC_BEACON = 0x0010,
++        } WMI_CONNECT_CTRL_FLAGS_BITS;
++
++    pairwiseCryptoLen and groupCryptoLen are valid when the respective
++    CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in
++    bytes.
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    CREATE_PSTREAM
++
++Synopsis
++    The host uses this command to create a new prioritized data endpoint between the
++    host and the AR6000 device that carries a prioritized stream of data. If the AP that the
++    device connects to requires TSPEC stream establishment, the device requests the
++    corresponding TSPEC with the AP. The maximum and minimum service interval
++    ranges from 0 \96 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a
++    reply event for this command, as it is always assumed the command has succeeded.
++    An AP admission control response comes to the host via a WMI_CAC_INDICATION
++    event, once the response for the ADDTS frame comes.
++
++    Examples of cases where reassociation is generated (when WMM) and cases where
++    ADDTS is generated (when WMM and enabling ACM) are when:
++        Changing UAPSD flags in WMM mode, reassociation is generated
++        Changing the interval of sending auto QoS Null frame in WMM mode;
++            reassociation is not generated
++        Issuing a command with same previous parameters in WMM mode and enabling
++            ACM, an ADDTS request is generated
++        Changing the interval of a QoS null frame sending in WMM mode and enabling
++            ACM, an ADDTS request is generated
++        Issuing the command in disconnected state, reassociation or ADDTS is not
++            generated but the parameters are available after (re)association
++
++Command
++    --createqos <user priority> <direction> <traffic class>
++<trafficType> <voice PS capability> <min service interval> <max
++service interval> <inactivity interval> <suspension interval>
++<service start time> <tsid> <nominal MSDU> <max MSDU> <min data
++rate> <mean data rate> <peak data rate> <max burst size> <delay
++bound> <min phy rate> <sba> <medium time> where:
++
++    <user priority>
++    802.1D user priority range (0\967)
++    <direction>
++        = 0    Tx (uplink) traffic
++        = 1    Rx (downlink) traffic
++        = 2    Bi-directional traffic
++    <traffic class>
++        = 1    BK
++        = 2    VI
++        = 3    VO
++    <trafficType>
++        = 0    Aperiodic
++        = 1    Periodic
++    <voice PS capability>
++        Specifies whether the voice power save mechanism
++    (APSD if AP supports it or legacy/simulated APSD
++    [using PS-Poll]) should be used
++        = 0    Disable voice power save for traffic class
++        = 1    Enable APSD voice power save for traffic class
++        = 2    Enable voice power save for all traffic classes
++    <min service interval>
++        (In ms)
++    <max service interval>
++        Inactivity interval (in ms) (0 = Infinite)
++    <suspension interval>
++        (In ms)
++    <service start time>
++        Service start time
++    <tsid>
++        TSID range (0\9615)
++    <nominal MSDU>
++        Nominal MAC SDU size
++    <max MSDU>
++        Maximum MAC SDU size
++    <min data rate>
++        Minimum data rate (in bps)
++    <mean data rate>
++        Mean data rate (in bps)
++    <peak data rate>
++        Peak data rate (in bps)
++    <max burst size>
++        Maximum burst size (in bps)
++    <delay bound>
++        Delay bound
++    <min phy rate>
++        Minimum PHY rate (in bps)
++    <sba>
++        Surplus bandwidth allowance
++    <medium time>
++        Medium time in TU of 32-ms periods per sec
++    ... CREATE_PSTREAM (continued)
++
++Command Parameters
++    UINT8 trafficClass    TRAFFIC_CLASS value
++    UINT8 traffic
++    Direction
++    DIR_TYPE value
++    UINT8    rxQueueNum
++        AR6000 device mailbox index (2 or 3)
++        corresponding to the endpoint the host
++        wishes to use to receive packets for the
++        prioritized stream
++    UINT8 trafficType  TRAFFIC_TYPE value
++    UINT8 voicePS
++Capability
++    VOICEPS_CAP_TYPE value
++    UINT8 tsid          Traffic stream ID
++    UINT8 userPriority  802.1D user priority
++    UINT16 nominalMSDU  Nominal MSDU in octets
++    UINT16 maxMSDU      Maximum MSDU in octets
++    UINT32 minServiceInt Minimum service interval: the min.
++                            period of traffic specified (in ms)
++    UINT32 maxServiceInt  Maximum service interval: the max.
++                        period of traffic specified (in ms)
++    UINT32 inactivityInt Indicates how many ms an established
++                        stream is inactive before the prioritized
++                        data endpoint is taken down and the
++                        corresponding T-SPEC deleted
++    UINT32 suspensionInt  Suspension interval (in ms)
++    UINT32 service       StartTime Service start time
++    UINT32 minDataRate  Minimum data rate (in bps)
++    UINT32 meanDataRate Mean data rate (in bps)
++    UINT32 peakDataRate Peak data rate (in bps)
++    UINT32 maxBurstSize
++    UINT32 delayBound
++    UINT32 minPhyRate   Minimum PHY rate for TSPEC (in bps)
++    UINT32 sba          Surplus bandwidth allowance
++    UINT32 mediumTime   Medium TSPEC time (in units of 32 ms)
++Command Values
++    {
++        WMM_AC_BE = 0   Best Effort
++        WMM_AC_BK = 1   Background
++        WMM_AC_VI = 2   Video
++        WMM_AC_VO = 3   Voice
++        All other values reserved
++    } TRAFFIC_CLASS
++    {
++        UPLINK_TRAFFIC   = 0  From the AR6000 device to the AP
++        DOWNLINK_TRAFFIC = 1  From the AP to the AR6000 device
++        BIDIR_TRAFFIC    = 2  Bi-directional traffic
++        All other values reserved
++    } DIR_TYPE
++    {
++        DISABLE_FOR_THIS_AC = 0
++        ENABLE_FOR_THIS_AC  = 1
++        ENABLE_FOR_ALL_AC   = 2
++        All other values reserved
++    } VOICEPS_CAP_TYPE
++
++    ... CREATE_PSTREAM (continued)
++
++
++        VI  BE   BK    Supported, Y/N?
++   0    0    0    0    Y
++   0    0    0    1    Y
++   0    0    1    0    N
++   0    0    1    1    N
++   0    1    0    0    Y
++   0    1    0    1    Y
++   0    1    1    0    N
++   0    1    1    1    N
++   1    0    0    0    Y
++   1    0    0    1    Y
++   1    0    1    0    N
++   1    1    0    0    N
++   1    1    0    1    Y
++   1    1    0    0    N
++   1    1    1    0    N
++   1    1    1    1    Y
++
++Reset Value
++    No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created
++    (either implicitly by data flow or explicitly by user)
++
++Restrictions
++    This command can only be issued when the device is in the CONNECTED state. If
++    the device receives the command while in DISCONNECTED state, it replies with a
++    failure indication. At most four prioritized data endpoints can be created, one for
++    each AC.
++
++See Also
++    \93DELETE_PSTREAM\94
++=====================================================================
++
++Name
++    DELETE_BAD_AP
++
++Synopsis
++    The host uses this command to clear a particular entry in the bad AP table
++
++Command
++    wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP
++    entry. num is index from 0-3
++
++Command Parameters
++    UINT8  badApIndex   Index [0...n] that identifies the entry in the bad
++                        AP table to delete
++
++Command Values
++    badApIndex   = 0, 1, 2, 3
++            Entry in the bad AP table
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    \93ADD_BAD_AP\94
++
++=====================================================================
++
++
++Name
++    DELETE_CIPHER_KEY
++
++Synopsis
++    The host uses this command to delete a key that was previously added with the
++    \93ADD_CIPHER_KEY\94 command.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8   keyIndex    Index (0...3) of the key to be deleted
++
++Command Values
++    keyIndex    = 0, 1,2, 3    Key to delete
++
++Reset Value
++    None
++
++Restrictions
++    The host should not delete a key that is currently in use by the AR6000.
++
++See Also
++    \93ADD_CIPHER_KEY\94
++
++=====================================================================
++
++Name
++    DELETE_PSTREAM
++
++Synopsis
++    The host uses this command to delete a prioritized data endpoint created by a
++    previous \93CREATE_PSTREAM\94 command
++
++Command
++    --deleteqos <trafficClass> <tsid>, where:
++
++    <traffic class>
++        = 0    BE
++        = 1    BK
++        = 2    VI
++        = 3    VO
++    <tsid>
++        The TSpec ID; use the -qosqueue option
++        to get the active TSpec IDs for each traffic class
++
++Command Parameters
++    A_UINT8    trafficClass    Indicate the traffic class of the stream
++                            being deleted
++
++Command Values
++    {
++        WMM_AC_BE = 0    Best effort
++        WMM_AC_BK = 1    Background
++        WMM_AC_VI = 2    Video
++        WMM_AC_VO = 3    Voice
++    } TRAFFIC CLASS
++
++    0-15 for TSID
++
++Reply Values
++    N/A
++
++Restrictions
++    This command should only be issued after a \93CREATE_PSTREAM\94 command has
++    successfully created a prioritized stream
++
++See Also
++    \93CREATE_PSTREAM\94
++
++=====================================================================
++
++
++Name
++    DELETE_WOW_PATTERN
++
++Synopsis
++    The host uses this command to remove a pre-specified pattern from the
++    WoW pattern list.
++
++Command
++    wmiconfig \96delwowpattern <list-id> <pattern-id>
++
++Command Parameters
++    A_UINT8    filter_list_id    ID of the list that contains the WoW filter
++                                 pattern to delete
++    A_UINT8    filter_id    ID of the WoW filter pattern to delete
++
++Reply Parameters
++    None
++
++
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    \93ADD_WOW_PATTERN\94
++
++=====================================================================
++
++
++Name
++    EXTENSION
++
++Synopsis
++    The WMI message interface is used mostly for wireless control messages to a wireless
++    module applicable to wireless module management regardless of the target platform
++    implementation. However, some commands only peripherally related to wireless
++    management are desired during operation. These wireless extension commands may
++    be platform-specific or implementation-dependent.
++
++Command
++    N/A
++
++Command Parameters
++    Command-specific
++
++Command Values
++    Command-specific
++
++Reply Parameters
++    Command-specific
++
++Reset Values
++    None defined
++
++Restrictions
++    None defined
++
++=====================================================================
++
++
++Name
++    GET_BIT_RATE
++
++Synopsis
++    Used by the host to obtain the rate most recently used by the AR6000 device
++
++Command
++    wmiconfig eth1 --getfixrates
++
++Command Parameters
++    None
++
++
++
++Reply Parameters
++    INT8
++    rateIndex
++    See the \93SET_BIT_RATE\94 command
++
++Reset Values
++    None
++
++Restrictions
++    This command should only be used during development/debug; it is not intended
++for use in production. It is only valid when the device is in the CONNECTED state
++
++See Also
++    \93SET_BIT_RATE\94
++
++=====================================================================
++
++
++Name
++    GET_CHANNEL_LIST
++
++Synopsis
++    Used by the host uses to retrieve the list of channels that can be used by the device
++    while in the current wireless mode and in the current regulatory domain.
++
++Command
++    TBD
++
++Command Parameters
++    None
++
++Reply Parameters
++    UINT8    reserved    Reserved
++    UINT8    numberOfChannels    Number of channels the reply contains
++    UINT16    channelList[numberOfChannels]  Array of channel frequencies (in MHz)
++
++Reset Values
++    None defined
++
++Restrictions
++    The maximum number of channels that can be reported are 32
++
++=====================================================================
++
++
++Name
++    GET_FIXRATES
++
++Synopsis
++    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
++    running-average value. This command will clear the history and have a fresh start for
++    the running-average mechanism.
++
++Synopsis
++    This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate
++    that the AR6001 or AR6001 is using. See \93SET_FIXRATES\94.
++
++Command
++    wmiconfig eth1 --getfixrates
++
++Command Parameters
++    A_UINT16    fixRateMask;    Note: if this command is used prior to
++                using WMI_SET_FIXRATES, AR6000
++                returns 0xffff as fixRateMask, indicating
++                all the rates are enabled
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    \93SET_FIXRATES\94
++
++=====================================================================
++
++
++
++Name
++    GET_PMKID_LIST_CMD
++
++Synopsis
++    Retrieves the list of PMKIDs on the firmware. The
++    WMI_GET_PMKID_LIST_EVENT is generated by the firmware.
++
++Command
++    TBD
++
++Command Parameters
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++See Also
++    SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT
++
++=====================================================================
++
++
++Name
++    GET_ROAM_TBL
++
++Synopsis
++    Retrieve the roaming table maintained on the target. The response is reported
++    asynchronously through the ROAM_TBL_EVENT.
++
++Command
++    wmiconfig --getroamtable <roamctrl> <info>
++
++Command Parameters
++    A_UINT8    roamCtrlType;
++    A_UINT16   roamMode
++    A_UINT16   numEntries
++    WMI_BSS_ROAM_INFO bssRoamInfo[1]
++
++Reply Value
++    Reported asynchronously through the ROAM_TBL_EVENT
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    SET_KEEPALIVE
++
++=====================================================================
++
++
++Name
++    GET_TARGET_STATS
++
++Synopsis
++    The host uses this command to request that the target send the statistics that it
++    maintains. The statistics obtained from the target are accrued in the host every time
++    the GET_TARGET_STATS command is issued. The --clearStats option is added to
++    clear the target statistics maintained in the host.
++
++Command
++    wmiconfig --getTargetStats --clearStats
++
++Command Parameters
++    TARGET_STATS    targetStats
++    WMI_TARGET_STATS
++    UINT8   clearStats
++
++
++Reply Value
++    RSSI return value (0\96100)
++
++Reset Values
++    All statistics are cleared (zeroed)
++
++Restrictions
++    The --getTargetStats option must be used; the --clearStats option is also available also
++
++
++=====================================================================
++
++Name
++    GET_TX_PWR
++
++Synopsis
++    The host uses this command to retrieve the current Tx power level
++
++Command
++    wmiconfig -i eth1 --getpower
++
++Command Parameters
++    None
++
++Reply Parameters
++    UINT16 dbM    The current Tx power level specified in dbM
++
++Reset Values
++    The maximum permitted by the regulatory domain
++
++Restrictions
++    None
++
++See Also
++    \93SET_TX_PWR\94
++
++=====================================================================
++
++
++Name
++    GET_WOW_LIST
++
++Synopsis
++    The host uses this command to retrieve the current list of WoW patterns.
++
++Command
++    wmiconfig \96getwowlist <list-id>
++
++Command Parameters
++    A_UINT8 filter_list_id    ID of the list of WoW patterns to retrieve
++
++Reply Value(s)
++    A_UINT16  num_filters    Number of WoW patterns contained in the list
++    A_UINT8   wow_mode    Current mode of WoW (enabled or disabled)
++    A_UINT8    host_mode    Current host mode (asleep or awake)
++    WOW_FILTER    wow_filters[1]
++        Contents of the WoW filter pattern list
++        (contains mask, pattern, offset and size
++    information for each of the patterns)
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    \93SET_WSC_STATUS\94
++
++=====================================================================
++
++
++Name
++    LQ_THRESHOLD_PARAMS
++
++Synopsis
++    Sets Link Quality thresholds, the sampling will happen at every unicast data frame
++    Tx if a certain threshold is met, and the corresponding event will be sent to the host.
++
++Command
++    --lqThreshold <enable> <upper_threshold_1> ...
++    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
++
++Command Parameters
++    <enable>    = 0    Disable link quality sampling
++                = 1    Enable link quality sampling
++    <upper_threshold_x>  Above thresholds (value in [0,100]), in
++                    ascending order
++    <lower_threshold_x> Below thresholds (value in [0,100]), in
++                    ascending order
++
++Command Values
++    See command parameters
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    OPT_TX_FRAME
++
++Synopsis
++    Special feature, sends a special frame.
++
++Command
++    wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen>
++    <optIEData>
++
++Command Parameters
++    {
++        A_UINT16    optIEDataLen;
++        A_UINT8    frmType;
++        A_UINT8    dstAddr[ATH_MAC_LEN];
++        A_UINT8    bssid[ATH_MAC_LEN];
++        A_UINT8    optIEData[1];
++    } WMI_OPT_TX_FRAME_CMD;
++
++Command Values
++    <frmtype>   = 1    Probe request frame
++                = 2    Probe response frame
++                = 3    CPPP start
++                = 4    CPPP stop
++
++Reset Value
++    None defined
++
++Restrictions
++    Send a special frame only when special mode is on.
++
++=====================================================================
++
++
++Name
++    RECONNECT
++
++Synopsis
++    This command requests a reconnection to a BSS to which the AR6000 device was
++    formerly connected
++
++Command
++    TBD
++
++Command Parameters
++    UINT16    channel    Provides a hint as to which channel was
++                        used for a previous connection
++    UINT8    bssid[6]    If set, indicates which BSSID to connect to
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++See Also
++    \93CONNECT_CMD\94
++
++=====================================================================
++
++
++Name
++    RSSI_THRESHOLD_PARAMS
++
++Synopsis
++    Configures how the AR6000 device monitors and reports signal strength (RSSI) of the
++    connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in
++    dbM) of the host specification divide the signal strength range into six segments.
++    When signal strength increases or decreases across one of the boundaries, an
++    RSSI_THRESHOLD event is signaled to the host. The host may then choose to take
++    action (such as influencing roaming).
++
++Command
++    wmiconfig eth1 --rssiThreshold <weight> <pollTime>
++        <above_threshold_val_1> ... <above_threshold_tag_6>
++        <above_threshold_val_6>
++        <below_threshold_tag_1> <below_threshold_val_1> ...
++        <below_threshold_tag_6> <below_threshold_val_6>
++
++Command Parameters
++    UINT8    weight    Range in [1, 16] used to calculate average RSSI
++    UINT32   pollTime   RSSI (signal strength) sampling frequency in
++                seconds (if pollTime = 0, single strength
++        sampling is disabled)
++    USER_RSS__THOLD tholds[12]  Thresholds (6 x 2)
++
++Command Values
++    None defined
++
++Reset Values
++    pollTime is 0, and sampling is disabled
++
++Restrictions
++    Can only be issued if the AR6000 device is connected
++
++
++=====================================================================
++
++Name
++    SCAN_PARAMS
++
++Synopsis
++    The minact parameter determines the minimum active channel dwell time, within
++    which if the STA receives any beacon, it remains on that channel until the maxact
++    channel dwell time. If the STA does not receive a beacon within the minact dwell
++    time, it switches to scan the next channel.
++
++Command
++    wmiconfig -scan -minact=<ms> --maxact=<ms>
++
++Command Parameters
++    UINT16    maxact    Channel dwell time (in ms), default = 0
++    UINT16    minact    Channel dwell time (in ms), default = 105
++
++Command Values
++    See channel parameters
++
++Reset Values
++    None defined
++
++Restrictions
++    The minact value should be greater than 0; maxact should be between 5\9665535 ms
++    and greater than minact
++
++=====================================================================
++
++
++Name
++    SET_ACCESS_PARAMS
++
++Synopsis
++    Allows the host to set access parameters for the wireless network. A thorough
++    understanding of IEEE 802.11 is required to properly manipulate these parameters.
++
++Command
++    wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15>
++    --cwmax <0-15> --aifsn<0-15>
++
++Command Parameters
++    UINT16    txop    The maximum time (expressed in units of
++                        32 ms) the device can spend transmitting
++                        after acquiring the right to transmit
++    UINT8    eCWmin    Minimum contention window
++    UINT8    eCWmax    Maximum contention window
++    UINT8    aifsn    The arbitration inter-frame space number
++
++Command Values
++    None
++
++Reset Values
++    Reasonable defaults that vary, between endpoints (prioritized streams)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_ADHOC_BSSID
++
++Synopsis
++    Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID
++    is not found, the target creates an ad hoc network with this BSSID after the connect
++    WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL).
++
++Command
++    wmiconfig eth1 --adhocbssid <bssid>
++
++Command Parameters
++    A_UINT8     bssid[ATH_MAC_LEN]    BSSID is specified in xx:xx:xx:xx:xx:xx format
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_AKMP_PARAMS
++
++Synopsis
++    Enables or disables multi PMKID mode.
++
++Command
++    wmiconfig eth1 --setakmp --multipmkid=<on/off>
++
++Command Parameters
++    typedef struct {
++      A_UINT32    akmpInfo;
++    } WMI_SET_AKMP_PARAMS_CMD;
++
++Command Values
++    akmpInfo;
++    bit[0] = 0
++        MultiPMKID mode is disabled and PMKIDs that
++        were set using the WMI_SET_PMKID_CMD are
++        used in the [Re]AssocRequest frame.
++     bit[0] = 1
++        MultiPMKID mode is enabled and PMKIDs issued
++        by the WMI_SET_PMKID_LIST_CMD are used in
++        the next [Re]AssocRequest sent to the AP.
++
++Reset Values
++    MultiPMKID mode is disabled
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_APPIE
++
++Synopsis
++    Add an application-specified IE to a management frame. The maximum length is
++    76 bytes. Including the length and the element ID, this translates to 78 bytes.
++
++Command
++    wmiconfig --setappie <frame> <IE>, where:
++
++    frame
++        One of beacon, probe, respon, assoc
++
++    IE
++        A hex string beginning with DD (if = 0, no
++        IE is sent in the management frame)
++
++Command Parameters
++    mgmtFrmType;
++        A WMI_MGMT_FRAME_TYPE
++
++    ieLen;
++        Length of the IE to add to the GMT frame
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    Supported only for the probe request and association request management frame
++types. Also, only one IE can be added per management frame type.
++
++=====================================================================
++
++
++Name
++    SET_ASSOC_INFO
++
++Synopsis
++    The host uses this command to specify any information elements (IEs) it wishes the
++    AR6000 device to add to all future association and reassociation requests. IEs must be
++    correct and are used as is by the device. IEs specified through this command are
++    cleared with a DISCONNECT.
++
++Command
++    wmiconfig eth1 --setAssocIe <IE>
++
++Command Parameters
++    UINT8    ieType    Used directly in 802.11 frames
++    UINT8    bufferSize    Size of assocInfo (in bytes) ranging from
++                        0\96240. If = 0, previously set IEs are cleared.
++    UINT8    assocInfo[bufferSize]    Used directly in 802.11 frames
++
++Command Values
++    None
++
++Reset Values
++    IEs are cleared
++
++Restrictions
++    This command can only be issued in the DISCONNECTED state
++
++=====================================================================
++
++
++Name
++    SET_AUTHMODE
++
++Synopsis
++    Sets the 802.11 authentication mode of reconnection
++
++Command
++    wmiconfig eth1 --setauthmode <mode>
++
++Command Parameters
++    UINT8    mode
++
++Command Values
++    mode    = 0x00    Proceed with authentication during reconnect
++            = 0x01    Do not proceed with authentication during reconnect
++
++Reset Values
++    Authentication
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BEACON_INT
++
++Synopsis
++    Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
++    impact on power savings. To some degree, a longer interval reduces power
++    consumption but also decreases throughput. A thorough understanding of IEEE
++    802.11 ad hoc networks is required to use this command effectively.
++
++Command
++    wmiconfig eth1 --ibssconintv
++
++Command Parameters
++    UINT16    beaconInterval    Specifies the beacon interval in TU units (1024 ms)
++
++Command Values
++    None
++
++Reset Values
++    The default beacon interval is 100 TUs (102.4 ms)
++
++Restrictions
++    This command can only be issued before the AR6000 device starts an ad hoc network
++
++See Also
++    \93SET_IBSS_PM_CAPS\94
++
++=====================================================================
++
++
++Name
++    SET_BIT_RATE
++
++Synopsis
++    The host uses this command to set the AR6000 device to a specific fixed rate.
++
++Command
++    wmiconfig eth1 --setfixrates <rate_0> ... <rate_n>
++
++Command Parameters
++    INT8    rateIndex
++    A WMI_BIT_RATE value
++    {
++        RATE_AUTO    = -1
++        RATE_1Mb     = 0
++        RATE_2Mb     = 1
++        RATE_5_5M    = 2
++        RATE_11Mb    = 3
++        RATE_6Mb     = 4
++        RATE_9Mb     = 5
++        RATE_12Mb    = 6
++        RATE_18Mb    = 7
++        RATE_24Mb    = 8
++        RATE_36Mb    = 9
++        RATE_48Mb    = 10
++        RATE_54Mb    = 11
++      } WMI_BIT_RATE
++
++
++Command Values
++    See command parameters
++
++Reset Values
++    The dynamic rate is determined by the AR6000 device
++
++Restrictions
++    This command is intended for use only during development/debug; it is not
++intended for use in production
++
++See Also
++    \93GET_BIT_RATE\94
++
++=====================================================================
++
++
++Name
++    SET_BMISS_TIME
++
++Synopsis
++    This command sets the beacon miss (BMISS) time, which the AR6000 hardware use
++    to recognize missed beacons. When an excessive number (15) of consecutive beacons
++    are missed, the AR6000 consider switching to a different BSS. The time can be
++    specified in number of beacons or in TUs.
++
++Command(s)
++    wmiconfig eth1 --setbmissbeacons=<val>
++    wmiconfig eth1 --setbmisstime=<val>
++
++Command Parameters
++    UINT16    bmissTime    Specifies the beacon miss time
++                            [1000...5000] in TUs (1024 ms)
++    UINT16    bmissbeacons  Specifies the number of beacons [5...50]
++
++Command Values
++    None
++
++Reset Values
++    bmissTime is 1500 TUs (1536 ms)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BSS_FILTER
++
++Synopsis
++    The host uses this to inform the AR6000 device of the types of networks about which
++    it wants to receive information from the \93BSSINFO\94 event. As the device performs
++    either foreground or background scans, it applies the filter and sends \93BSSINFO\94
++    events only for the networks that pass the filter. If any of the  bssFilter or the ieMask
++    filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match
++    for the IEs in the beacons, probe reponses and channel switch action management
++    frame. See also \93Scan and Roam\94 on page C-1.
++
++    The BSS filter command has been enhanced to support IE based filtering. The IEs can
++    be specified as a bitmask through this command using this enum.
++
++Command
++    wmiconfig eth1 \96filter = <filter> --ieMask 0x<mask>
++
++Command Parameters
++    UINT8    BssFilter
++
++ Command Values
++    typedef struct {
++        A_UINT8    bssFilter;    See WMI_BSS_FILTER
++        A_UINT32    ieMask;
++    } __ATTRIB_PACK WMI_BSS_FILTER_CMD;
++
++    The ieMask can take this combination of values:
++
++    enum {
++        BSS_ELEMID_CHANSWITCH   = 0x01
++        BSS_ELEMID_ATHEROS      = 0x02,
++    }
++
++Reply Value
++    None
++
++Reset Value
++    BssFilter = NONE_BSS_FILTER (0)
++
++Restrictions
++    None
++
++See Also
++    \93CONNECT_CMD\94
++
++=====================================================================
++
++
++Name
++    SET_BT_PARAMS
++
++Synopsis
++    This command is used to set the status of a Bluetooth stream or set Bluetooth
++    coexistence register parameters. The stream may be an SCO or an A2DP stream and
++    its status can be started/stopped/suspended/resumed.
++
++Command
++    wmiconfig \96setBTparams <paramType> <params>
++
++Command Parameters
++    struct {
++       union {
++            BT_PARAMS_SCO    scoParams;
++            BT_PARAMS_A2DP   a2dpParams;
++            BT_PARAMS_MISC   miscParams;
++            BT_COEX_REGS     regs;
++        } info;
++         A_UINT8 paramType;
++        struct {
++            A_UINT8 noSCOPkts;    Number of SCO packets between consecutive PS-POLLs
++            A_UINT8 pspollTimeout;
++            A_UINT8 stompbt;
++        } BT_PARAMS_SCO;
++        struct {
++            A2DP BT stream parameters
++            A_UINT32   period;
++            A_UINT32   dutycycle;
++            A_UINT8    stompbt;
++        } BT_PARAMS_A2DP;
++        struct {
++            union {
++               WLAN_PROTECT_POLICY_TYPE   protectParams;
++               A_UINT16    wlanCtrlFlags;
++            }info;
++        A_UINT8 paramType;
++        } BT_PARAMS_MISC;
++        struct {
++            BT coexistence registers values
++            A_UINT32    mode;     Coexistence mode
++            A_UINT32    scoWghts; WLAN and BT weights
++            A_UINT32    a2dpWghts;
++            A_UINT32    genWghts;
++            A_UINT32    mode2;    Coexistence mode2
++            A_UINT8    setVal;
++        } BT_COEX_REGS;
++
++Command Values
++    None defined
++
++Reset Value
++    None
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_BT_STATUS
++
++Synopsis
++    Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream
++    and its status can be started/stopped/suspended/resumed.
++
++Command
++    wmiconfig \96setBTstatus <streamType> <status>
++
++Command Parameters
++    {
++        A_UINT8        streamType;    Stream type
++        A_UINT8        status;    Stream status
++    }WMI_SET_BT_STATUS_CMD;
++
++Command Values
++    {
++        BT_STREAM_UNDEF    = 0
++        BT_STREAM_SCO
++        SCO stream
++        BT_STREAM_A2DP
++        A2DP stream
++        BT_STREAM_MAX
++    } BT_STREAM_TYPE;
++
++    {
++        BT_STATUS_UNDEF    = 0
++        BT_STATUS_START
++        BT_STATUS_STOP
++        BT_STATUS_RESUME
++        BT_STATUS_SUSPEND
++        BT_STATUS_MAX
++    } BT_STREAM_STATUS;
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_CHANNEL_PARAMETERS
++
++Synopsis
++    Configures various WLAN parameters related to channels, sets the wireless mode,
++    and can restrict the AR6000 device to a subset of available channels. The list of
++    available channels varies depending on the wireless mode and the regulatory
++    domain. The device never operates on a channel outside of its regulatory domain. The
++    device starts to scan the list of channels right after this command.
++
++Command
++    wmiconfig eth1 --wmode <mode> <list>
++
++Command Parameters
++    UINT8    phyMode    See Values below.
++    UINT8    numberOfChannels
++        Number of channels in the channel array that
++        follows. If = 0, then the device uses all of the
++        channels permitted by the regulatory domain
++        and by the specified phyMode.
++    UINT16    channel[numberOfChannels]
++        Array listing the subset of channels (expressed
++        as frequencies in MHz) the host wants the
++        device to use. Any channel not permitted by
++        the specified phyMode or by the specified
++        regulatory domain is ignored by the device.
++
++Command Values
++    phyMode = {
++        Wireless mode
++        11a    = 0x01
++        11g    = 0x02
++        11ag   = 0x03
++        11b    = 0x04
++        11g only    = 0x05
++        }
++
++Reset Values
++    phyMode
++    11ag
++    802.11a/g modules
++        11g
++    802.11g module
++    channels
++        Defaults to all channels permitted by the
++        current regulatory domain.
++
++Restrictions
++    This command, if issued, should be issued soon after reset and prior to the first
++    connection. This command should only be issued in the DISCONNECTED state.
++
++=====================================================================
++
++
++Name
++    SET_DISC_TIMEOUT
++
++Synopsis
++    The host uses this command to configure the amount of time that the AR6000 should
++    spend when it attempts to reestablish a connection after losing link with its current
++    BSS. If this time limit is exceeded, the AR6000 send a \93DISCONNECT\94 event. After
++    sending the \93DISCONNECT\94 event the AR6000 continues to attempt to reestablish a
++    connection, but they do so at the interval corresponding to a foreground scan as
++    established by the \93SET_SCAN_PARAMS\94 command.
++
++    A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming,
++    so that the AR6000 will not perform any scans after sending a \93DISCONNECT\94
++    event to the host. The state is maintained until a shutdown or host sets different
++    timeout value from 0.
++
++Command
++    wmiconfig eth1 --disc=<timeout in seconds>
++
++Command Parameters
++    UINT8    disconnectTimeout
++        Specifies the time limit (in seconds) after
++        which a failure to reestablish a connection
++        results in a \93DISCONNECT\94 event
++
++Command Values
++    None
++
++Reset Values
++    disconnectTimeout is 10 seconds
++
++Restrictions
++    This command can only be issued while in a DISCONNECTED state
++
++=====================================================================
++
++
++Name
++    SET_FIXRATES
++
++Synopsis
++    By default, the AR6000 device uses all PHY rates based on mode of operation. If the
++    host application requires the device to use subset of supported rates, it can set those
++    rates with this command. In 802.11g mode, the AR6000 device takes the entire
++    802.11g basic rate set and the rates specified with this command and uses it as the
++    supported rate set.
++
++    This rate set is advertised in the probe request and the assoc/re-assoc request as
++    supported rates. Upon successful association, the device modifies the rate set pool
++    using the: intersection of AP-supported rates with the union of the 802.11g basic rate
++    set and rates set using this command. The device picks transmission rates from this
++    pool based on a rate control algorithm.
++
++Command
++    TBD
++
++Command Parameters
++    A_UINT16    fixRateMask;
++        The individual bit is an index for rate table,
++        and setting the that index to 1 would set that
++        corresponding rate. E.g., fixRateMask = 9
++        (1001) sets 1 Mbps and 11 Mbps.
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++See Also
++    \93GET_FIXRATES\94
++
++=====================================================================
++
++
++Name
++    SET_WHAL_PARAM
++
++Synopsis
++    An internal AR6000 command that is used to set certain hardware parameters. The
++    description of this command is in $WORKAREA/include/halapi.h.
++
++Command
++    TBD
++
++Command Parameters
++    ATH_HAL_SETCABTO_CMDID
++        Sets the timeout waiting for the multicast
++        traffic after a DTIM beacon (in TUs).
++
++Command Values
++    None
++
++Reset Value
++    Default = 10 TUs
++
++Restrictions
++    This command should be executed before issuing a connect command.
++
++=====================================================================
++
++
++Name
++    SET_HOST_SLEEP_MODE
++
++Synopsis
++    The host uses this command to set the host mode to asleep or awake. All packets are
++    delivered to the host when the host mode is awake. When host mode is asleep, only if
++    WoW is enabled and the incoming packet matches one of the specified WoW
++    patterns, will the packet be delivered to the host. The host will also be woken up by
++    the target for pattern-matching packets and important events.
++
++Command
++    wmiconfig \96sethostmode=<asleep/awake>
++
++Command Parameters
++    A_BOOL    awake    Set the host mode to awake
++    A_BOOL    asleep   Set the host mode to asleep
++
++Command Values
++    1 = awake, 0 = asleep
++
++Reset Value
++    None defined (default host mode is awake)
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_IBSS_PM_CAPS
++
++Synopsis
++    Used to support a non-standard power management scheme for an ad hoc wireless
++    network consisting of up to eight stations (STAs) that support this form of power
++    saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc
++    networks is required to use this command effectively.
++
++Command
++    wmiconfig eth1 --ibsspmcaps --ps=<enable/disable>
++        --aw=<ATIM Windows in ms>
++        --ttl=<Time to live in number of beacon periods>
++        --to=<timeout in ms>
++
++Command Parameters
++    UINT8    power_saving
++        = 0
++        The non-standard power saving scheme is
++        disabled and maximum throughput (with no
++        power saving) is obtained.
++
++        = 1
++        Ad hoc power saving scheme is enabled (but
++        throughput may be decreased)
++
++    UINT16    atim_windows
++        Specifies the length (in ms) of the ad hoc traffic
++        indication message (ATIM) windows used in an ad
++        hoc network. All Atheros-based STAs that join the
++        network use this duration ATIM window.
++
++    The duration is communicated between wireless
++    STAs through an IE in beacons and probe responses.
++
++    The host sets atim_windows to control trade-offs
++    between power use and throughput. The value
++    chosen should be based on the beacon interval (see
++    the \93SET_BEACON_INT\94 command) on the
++    expected number of STAs in the IBSS, and on the
++    amount of traffic and traffic patterns between STAs.
++
++    UINT16    timeout_value
++        Specifies the timeout (in ms). The value is the same
++        for all ad hoc connections, but tracks separately for
++        each.
++
++        Applicable only for a beacon period and used to
++        derive actual timeout values on the Tx and Rx sides.
++        On the Tx side, the value defines a window during
++        which the STA accepts the frame(s) from the host for a
++        particular connection. Until closed, the window
++        restarts with every frame received from the host. On
++        the Rx side, indicates the time until which the STA
++        continues accepting frames from a particular
++        connection. The value resets with every frame
++        received. The value can be used to determine the
++        trade off between throughput and power.
++        Default = 10 ms
++
++    UINT8    ttl
++        Specifies the value in number of beacon periods. The
++        value is used to set a limit on the time until which a
++        frame is kept alive in the AR6001 before being
++        discarded. Default = 5
++
++Command Values
++    None
++
++Reset Values
++    By default, power_saving is enabled with atim_window = 20 ms
++
++Restrictions
++    Can only be issued before the AR6000 starts an ad hoc network
++
++See Also
++    \93SET_BEACON_INT\94
++
++=====================================================================
++
++
++
++Name
++    SET_LISTEN_INT
++
++Synopsis
++    The host uses this command to request a listen interval, which determines how often
++    the AR6000 device should wake up and listen for traffic. The listen interval can be set
++    by the TUs or by the number of beacons. The device may not be able to comply with
++    the request (e.g., if the beacon interval is greater than the requested listen interval, the
++    device sets the listen interval to the beacon interval). The actual listen interval used
++    by the device is available in the \93CONNECT\94 event.
++
++Command
++    wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000>
++
++    --listenbeacons=<#of beacons, can range from 1 to 50>
++
++Command Parameters
++    UINT16    listenInterval
++        Specifies the listen interval in Kms
++        (1024 ms), ranging from 100 to 1000
++
++    UINT16    listenbeacons
++        Specifies the listen interval in beacons,
++        ranging from 1 to 50
++
++Command Values
++    None
++
++Reset Values
++    The device sets the listen interval equal to the beacon interval of the AP it associates
++    to.
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_LPREAMBLE
++
++Synopsis
++    Overrides the short preamble capability of the AR6000 device
++
++Command
++    TBD
++
++Command Parameters
++    WMI_LPREAMBLE_DISABLED
++        The device is short-preamble capable
++
++    WMI_LPREAMBLE_ENABLED
++        The device supports only the long-
++    preamble mode
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_MAX_SP_LEN
++
++Synopsis
++    Set the maximum service period; indicates the number of packets the AR6001 can
++    receive from the AP when triggered
++
++Command
++    wmiconfig eth1 --setMaxSPLength <maxSPLen>
++
++Command Parameters
++    UINT8    maxSPLen
++        An APSD_SP_LEN_TYPE value
++
++Command Values
++    {
++        DELIVER_ALL_PKT  = 0x0
++        DELIVER_2_PKT    = 0x1
++        DELIVER_4_PKT    = 0x2
++        DELIVER_6_PKT    = 0x3
++    }APSD_SP_LEN_TYPE
++
++
++Reset Values
++    maxSPLen is DELIVER_ALL_PKT
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_OPT_MODE
++
++Synopsis
++    Special feature, sets the special mode on/off
++
++Command
++    wmiconfig eth1 --mode <mode>
++    Set the optional mode, where mode is special or off
++
++Command Parameters
++    enum {
++        SPECIAL_OFF
++        SPECIAL_ON
++    } OPT_MODE_TYPE;
++
++Command Values
++
++Reset Value
++    Mode = Off
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_PMKID
++
++Synopsis
++    The host uses this command to enable or disable a pairwise master key ID (PMKID)
++    in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a
++    DISCONNECT command from the host. Individual entries in the cache might be
++    deleted as the AR6000 detect new APs and decides to remove old ones.
++
++Command
++    wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff>
++    --bsspmkid=<pmkid>
++
++Command Parameters
++    UINT8    bssid[6]
++        The MAC address of the AP that the
++        PMKID corresponds to (6 bytes in hex
++        format)
++
++    UINT8    enable
++        Either PMKID_DISABLE (0) to disable
++        the PMKID or PMKID_ENABLE (1) to
++        enable it (16 bytes in hex format)
++
++    UINT8    pmkid[16]
++        Meaningful only if enable is
++        PMKID_ENABLE, when it is the PMKID
++        that the AR6000 should use on the next
++        reassociation with the specified AP
++
++Command Values
++    enable
++    = 0 (disable), 1 (enable)
++    PKMID enabled/disabled
++
++Reset Values
++    None defined
++
++Restrictions
++    Only supported in infrastructure networks
++
++=====================================================================
++
++
++Name
++    SET_PMKID_LIST_CMD
++
++Synopsis
++    Configures the list of PMKIDs on the firmware.
++
++Command
++    wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1>
++    ... --pmkid=<pmkid_n>
++
++    Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16
++    bytes in hex format)
++
++Command Parameters
++    {
++        A_UINT8 pmkid[WMI_PMKID_LEN];
++    } __ATTRIB_PACK WMI_PMKID;
++
++    {
++        A_UINT32 numPMKID;
++        WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
++    } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD;
++
++Command Values
++    None
++
++Reset Values
++    None
++
++Restrictions
++    Supported only in infrastructure modes
++
++=====================================================================
++
++
++Name
++    SET_POWER_MODE
++
++Synopsis
++    The host uses this command to provide the AR6000 device with guidelines on the
++    desired trade-off between power utilization and performance.
++
++        In normal power mode, the device enters a sleep state if they have nothing to do,
++        which conserves power but may cost performance as it can take up to 2 ms to
++        resume operation after leaving sleep state.
++
++        In maximum performance mode, the device never enters sleep state, thus no time
++        is spent waking up, resulting in higher power consumption and better
++        performance.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8    powerMode
++        WMI_POWER_MODE value
++    {
++        REC_POWER   = 1
++            (Recommended setting) Tries to conserve
++            power without sacrificing performance
++        MAX_PERF_POWER    = 2
++            Setting that maximizes performance at
++            the expense of power
++
++            All other values are reserved
++    } WMI_POWER_MODE
++
++Command Values
++    See command parameters
++
++Reset Values
++    powerMode is REC_POWER
++
++Restrictions
++    This command should only be issued in the DISCONNECTED state for the
++    infrastructure network.
++
++            For a PM-disabled ad hoc network, the power mode should remain in
++            MAX_PERF_POWER.
++
++            For a PM-enabled ad hoc network, the device can have REC_POWER or
++            MAX_PERF_POWER set, but either way it must follow the power save ad hoc
++            protocol. The host can change power modes in the CONNECTED state.
++
++    Host changes to the PS setting when the STA is off the home channel take no effect
++    and cause a TARGET_PM_FAIL event.
++
++=====================================================================
++
++
++Name
++    SET_POWER_PARAMS
++
++Synopsis
++    The host uses this command to configure power parameters
++
++Command
++    wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL>
++    --dp=<DTIM policy: ignore/normal/stick>
++
++Command Parameters
++    UINT16    idle_period
++        Length of time (in ms) the AR6000 device
++        remains awake after frame Rx/Tx before going
++        to SLEEP state
++
++    UINT16    pspoll_number
++            The number of PowerSavePoll (PS-poll)
++            messages the device should send before
++            notifying the AP it is awake
++
++    UINT16    dtim_policy
++            A WMI_POWER_PARAMS_CMD value
++
++    {
++        IGNORE_DTIM    =1
++            The device does not listen to any content after
++            beacon (CAB) traffic
++        NORMAL_DTIM    = 2
++            DTIM period follows the listen interval (e.g., if
++            the listen interval is 4 and the DTIM period is 2,
++            the device wakes up every fourth beacon)
++        STICK_DTIM    = 3
++            Device attempt to receive all CAB traffic (e.g., if
++            the DTIM period is 2 and the listen interval is 4,
++            the device wakes up every second beacon)
++    } WMI_POWER_PARAMS_CMD
++
++Command Parameters
++    See command parameters
++
++Reset Values
++    idle_period
++        200 ms
++
++    pspoll_number
++    = 1
++
++    dtim_policy
++    = NORMAL_DTIM
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_POWERSAVE_PARAMS
++
++Synopsis
++    Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and
++    the two ASPD TIM policies
++
++Command
++    wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms>
++    --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/
++    adhere> --simulatedAPSDTimPolicy=<ignore/adhere>
++
++Command Parameters
++    typedef struct {
++        A_UINT16    psPollTimeout;
++            Timeout (in ms) after sending PS-POLL; the
++            AR6000 device sleeps if it does not receive a
++            data packet from the AP
++
++        A_UINT16    triggerTimeout;
++            Timeout (in ms) after sending a trigger; the
++            device sleeps if it does not receive any data
++            or null frame from the AP
++
++        APSD_TIM_POLICY    apsdTimPolicy;
++            TIM behavior with queue APSD enabled
++
++        APSD_TIM_POLICY    simulatedAPSD
++
++        TimPolicy;
++            TIM behavior with simulated APSD
++            enabled
++
++    typedef enum {
++        IGNORE_TIM_ALL_QUEUES_APSD = 0,
++        PROCESS_TIM_ALL_QUEUES_APSD = 1,
++        IGNORE_TIM_SIMULATED_APSD = 2,
++        POWERSAVE_TIMERS_POLICY = 3,
++    } APSD_TIM_POLICY;
++
++Command Values
++    None
++
++Reset Values
++    psPollTimeout is 50 ms; triggerTimeout is 10 ms;
++    apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD;
++    simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY
++
++Restrictions
++    When this command is used, all parameters must be set; this command does not
++    allow setting only one parameter.
++
++=====================================================================
++
++
++Name
++    SET_PROBED_SSID
++
++Synopsis
++    The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX
++    (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID
++    table. By default, the device actively looks for only the SSID specified in the
++    \93CONNECT_CMD\94 command, and only when the regulatory domain allows active
++    probing. With this command, specified SSIDs are probed for, even if they are hidden.
++
++Command
++    wmiconfig eth1 --ssid=<ssid> [--num=<index>]
++
++Command Parameters
++    {
++        A_UINT8    numSsids
++            A number from 0 to
++            MAX_PROBED_SSID_INDEX indicating
++            the active SSID table entry index for this
++            command (if the specified entry index
++            already has an SSID, the SSID specified in
++            this command replaces it)
++
++        WMI_PROBED_SSID_INFO    probedSSID[1]
++    } WMI_PROBED_SSID_CMD
++
++    {
++        A_UINT8    flag
++            WMI_SSID_FLAG indicates the current
++            entry in the active SSID table
++        A_UINT8    ssidLength
++            Length of the specified SSID in bytes.
++            If = 0, the entry corresponding to the
++            index is erased
++        A_UINT8    ssid[32]
++            SSID string actively probed for when
++            permitted by the regulatory domain
++    } WMI_PROBED_SSID_INFO
++
++Command Values
++    WMI_SSID_FLAG
++    {
++         DISABLE_SSID_FLAG    = 0
++            Disables entry
++        SPECIFIC_SSID_FLAG    = 1
++            Probes specified SSID
++        ANY_SSID_FLAG    = 2
++            Probes for any SSID
++    } WMI_SSID_FLAG
++
++Reset Value
++    The entries are unused.
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_REASSOC_MODE
++
++Synopsis
++    Specify whether the disassociated frame should be sent or not upon reassociation.
++
++Command
++    wmiconfig eth1 --setreassocmode <mode>
++
++Command Parameters
++    UINT8    mode
++
++Command Values
++    mode
++        = 0x00
++        Send disassoc to a previously connected AP
++        upon reassociation
++        = 0x01
++        Do not send disassoc to previously connected
++        AP upon reassociation
++
++Reset Values
++    None defined
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_RETRY_LIMITS
++
++Synopsis
++    Allows the host to influence the number of times that the AR6000 device should
++    attempt to send a frame before they give up.
++
++Command
++    wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries>
++    <enableNotify>
++
++Command Parameters
++    {
++        UINT8    frameType
++            A WMI_FRAMETYPE specifying
++            which type of frame is of interest.
++        UINT8    trafficClass
++            Specifies a traffic class (see
++            \93CREATE_PSTREAM\94). This
++            parameter is only significant when
++            frameType = DATA_FRAMETYPE.
++        UINT8    maxRetries
++            Maximum number of times the
++            device attempts to retry a frame Tx,
++            ranging from WMI_MIN_RETRIES
++            (2) to WMI_MAX_RETRIES (15). If
++            the special value 0 is used,
++            maxRetries is set to 15.
++        A_UINT8    enableNotify
++            Notify when enabled
++    } WMI_RETRY_LIMIT_INFO
++
++    {
++        A_UINT8    numEntries
++        WMI_RETRY_LIMIT_INFO  retryLimitInfo[1]
++    } WMI_SET_RETRY_LIMITS_CMD
++
++Command Values
++    {
++        MGMT_FRAMETYPE    = 0    Management frame
++        CONTROL_FRAMETYPE = 1    Control frame
++        DATA_FRAMETYPE    = 2    Data frame
++    } WMI_FRAMETYPE
++
++Reset Values
++    Retries are set to 15
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_ROAM_CTRL
++
++Synopsis
++    Affects how the AR6000 device selects a BSS. The host uses this command to set and
++    enable low RSSI scan parameters. The time period of low RSSI background scan is
++    mentioned in scan period. Low RSSI scan is triggered when the current RSSI
++    threshold (75% of current RSSI) is equal to or less than scan threshold.
++
++    Low RSSI roam is triggered when the current RSSI threshold falls below the roam
++    threshold and roams to a better AP by the end of the scan cycle. During Low RSSI
++    roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during
++    scan, it roams immediately to it instead of waiting for the end of the scan cycle. See
++    also \93Scan and Roam\94 on page C-1.
++
++Command
++    wmiconfig --roam <roamctrl> <info>, where info is <scan period>
++    <scan threshold> <roam threshold> <roam rssi floor>
++
++Command Parameters
++    A_UINT8    roamCtrlType;
++
++Command Values
++    WMI_FORCE_ROAM     = 1
++    Roam to the specified BSSID
++
++    WMI_SET_ROAM_MODE  = 2
++    Default, progd bias, no roam
++
++    WMI_SET_HOST_BIAS  = 3
++    Set the host bias
++
++    WMI_SET_LOWRSSI_SCAN_PARAMS  = 4
++    Info parameters
++
++    A_UINT8    bssid[ATH_MAC_LEN];
++    WMI_FORCE_ROAM
++
++    A_UINT8    roamMode;
++    WMI_SET_ROAM_MODE
++
++    A_UINT8    bssBiasInfo;
++    WMI_SET_HOST_BIAS
++
++    A_UINT16    lowrssi_scan_period;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_INT16
++    lowrssi_scan_threshold;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_INT16    lowrssi_roam_threshold;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++    A_UINT8    roam_rssi_floor;
++    WMI_SET_LOWRSSI_SCAN_PARAMS
++
++Reset Value
++    None defined (default lowrssi scan is disabled. Enabled only when scan period is set.)
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_RTS
++
++Synopsis
++    Decides when RTS should be sent.
++
++Command
++    wmiconfig eth1 --setRTS <pkt length threshold>
++
++Command Parameters
++    A_UINT16
++    threshold;
++    Command parameter threshold in bytes. An RTS is
++    sent if the data length is more than this threshold.
++    The default is to NOT send RTS.
++
++Command Values
++    None
++
++Reset Value
++    Not to send RTS.
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_SCAN_PARAMS
++
++Synopsis
++    The host uses this command to set the AR6000 scan parameters, including the duty
++    cycle for both foreground and background scanning. Foreground scanning takes
++    place when the AR6000 device is not connected, and discovers all available wireless
++    networks to find the best BSS to join. Background scanning takes place when the
++    device is already connected to a network and scans for potential roaming candidates
++    and maintains them in order of best to worst. A second priority of background
++    scanning is to find new wireless networks.
++
++    The device initiates a scan when necessary. For example, a foreground scan is always
++    started on receipt of a \93CONNECT_CMD\94 command or when the device cannot find
++    a BSS to connect to. Foreground scanning is disabled by default until receipt of a
++    CONNECT command. Background scanning is enabled by default and occurs every
++    60 seconds after the device is connected.
++
++    The device implements a binary backoff interval for foreground scanning when it
++    enters the DISCONNECTED state after losing connectivity with an AP or when a
++    CONNECT command is received. The first interval is ForegroundScanStartPeriod,
++    which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
++    If the host terminates a connection with DISCONNECT, the foreground scan period
++    is ForegroundScanEndPeriod. All scan intervals are measured from the time a full
++    scan ends to the time the next full scan starts. The host starts a scan by issuing a
++    \93START_SCAN\94 command. See also \93Scan and Roam\94 on page C-1.
++
++Command
++    wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> --
++    act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags
++    <connScan> <scanConnected> <activeScan> <reportBSSINFO>
++
++Command Parameters
++    UINT16    fgStartPeriod
++        First interval used by the device when it
++        disconnects from an AP or receives a
++        CONNECT command, specified in seconds (0\96
++        65535). If = 0, the device uses the reset value.
++        If = 65535, the device disables foreground
++        scanning.
++
++    UINT16    fgEndPeriod
++        The maximum interval the device waits between
++        foreground scans specified in seconds (from
++        ForegroundScanStartPeriod to 65535). If = 0, the
++        device uses the reset value.
++
++    UINT16    bgScanPeriod
++        The period of background scan specified in
++        seconds (0\9665535). By default, it is set to the reset
++        value of 60 seconds. If 0 or 65535 is specified, the
++        device disables background scanning.
++
++    UINT16    maxactChDwellTime
++        The period of time the device stays on a
++        particular channel while active scanning. It is
++        specified in ms (10\9665535). If the special value of
++        0 is specified, the device uses the reset value.
++
++    UINT16    PasChDwellTime
++        The period of time the device remains on a
++        particular channel while passive scanning. It is
++        specified in ms (10\9665535). If the special value of
++        0 is specified, the device uses the reset value.
++
++    UINT8    shortScanRatio
++        Number of short scans to perform for each
++        long scan.
++
++    UINT8    scanCtrlFlasgs
++
++    UINT16    minactChDwellTime
++        Specified in ms
++
++    UINT32    maxDFSchActTime
++        The maximum time a DFS channel can stay
++        active before being marked passive, specified in
++        ms.
++
++Command Values
++    None
++
++Reset Values
++    ForegroundScanStart
++Period
++        1 sec
++
++    ForegroundScanEndPeriod
++        60 sec
++
++    BackgroundScanPeriod
++        60 sec
++
++    ActiveChannelDwellTime
++        105 ms
++
++=====================================================================
++
++
++Name
++    SET_TKIP_COUNTERMEASURES
++
++Synopsis
++    The host issues this command to tell the target whether to enable or disable TKIP
++    countermeasures.
++
++Command
++    TBD
++
++Command Parameters
++    UINT8    WMI_TKIP_CM_ENABLE
++        Enables the countermeasures
++
++
++    UINT8    TKIP_CM_DISABLE
++        Disables the countermeasures
++
++Command Values
++    None
++
++Reset Values
++    By default, TKIP MIC reporting is disabled
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_TX_PWR
++
++Synopsis
++    The host uses this command to specify the Tx power level of the AR6000. Cannot be
++    used to exceed the power limit permitted by the regulatory domain. The maximum
++    output power is limited in the chip to 31.5 dBm; the range is 0 \96 31.5 dbm.
++
++Command
++    wmiconfig --power <dbM>
++
++Command Parameters
++    UINT8    dbM
++        The desired Tx power specified in dbM.
++        If = 0, the device chooses the maximum
++        permitted by the regulatory domain.
++
++Command Values
++    None
++
++Reset Values
++    The maximum permitted by the regulatory domain
++
++Restrictions
++    None
++
++See Also
++    \93GET_TX_PWR\94
++
++
++=====================================================================
++
++Name
++    SET_VOICE_PKT_SIZE
++
++Synopsis
++    If an AP does not support WMM, it has no way to differentiate voice from data.
++    Because the voice packet is typically small, packet in size less than voicePktSize are
++    assumed to be voice, otherwise it is treated as data.
++
++Command
++    wmiconfig eth1 --setVoicePktSize <size-in-bytes>
++
++Command Parameters
++    UINT16    voicePktSize
++        Packet size in octets
++
++Command Values
++    None
++
++Reset Values
++    voicePktSize default is 400 bytes
++
++Restrictions
++    No effect if WMM is unavailable
++
++
++=====================================================================
++
++Name
++    SET_WMM
++
++Synopsis
++    Overrides the AR6000 device WMM capability
++
++Command
++    wmiconfig eth1 --setwmm <enable>
++
++Command Parameters
++    WMI_WMM_ENABLED
++        Enables WMM
++
++    WMI_WMM_DISABLED
++        Disables WMM support
++
++Command Values
++    0 = disabled
++    1 = enabled
++
++Reset Value
++    WMM Disabled
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SET_WMM_TXOP
++
++Synopsis
++    Configures TxOP Bursting when sending traffic to a WMM capable AP
++
++Command
++    wmiconfig eth1 --txopbursting <burstEnable>
++
++    <burstEnable>
++        = 0
++    Disallow TxOp bursting
++
++        = 1
++    Allow TxOp bursting
++
++Command Parameters
++    txopEnable
++        = WMI_TXOP_DISABLED
++        Disabled
++
++        = WMI_TXOP_ENABLED
++        Enabled
++
++Command Values
++    txopEnable
++        = 0    Disabled
++
++        = 1    Enabled
++
++Reset Value
++    Bursting is off by default
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    SET_WOW_MODE
++
++Synopsis
++    The host uses this command to enable or disable the WoW mode. When WoW mode
++    is enabled and the host is asleep, pattern matching takes place at the target level.
++    Only packets that match any of the pre-specified WoW filter patterns, will be passed
++    up to the host. The host will also be woken up by the target. Packets which do not
++    match any of the WoW patterns are discarded.
++
++Command
++    wmiconfig \96setwowmode <enable/disable>
++
++Command Parameters
++    A_BOOL    enable_wow
++        Enable or disable WoW:
++
++Command Values
++        = 0
++    Disable WoW
++
++        = 1
++    Enable WoW
++
++Reset Value
++    None defined (default WoW mode is disabled).
++
++Restrictions
++    None
++
++See Also
++    \93GET_WOW_LIST\94
++
++
++=====================================================================
++
++Name
++    SET_WSC_STATUS
++
++Synopsis
++    The supplicant uses this command to inform the target about the status of the WSC
++    registration protocol. During the WSC registration protocol, a flag is set so the target
++    bypasses some of the checks in the CSERV module. At the end of the registration, this
++    flag is reset.
++
++Command
++    N/A
++
++Command Parameters
++    A_BOOL status
++        = 1    WSC registration in progress
++        = 0    WSC protocol not running
++
++Reply Parameters
++    None
++
++Reset Value
++    None defined (default = 0)
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    SNR_THRESHOLD_PARAMS
++
++Synopsis
++    Configures how the AR6000 device monitors and reports SNR of the connected BSS,
++    used as a link quality metric.
++
++Command
++    --snrThreshold <weight> <upper_threshold_1> ...
++    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
++    <pollTimer>
++
++Command Parameters
++    <weight>
++        Share with rssiThreshold. Range in [1, 16], used
++        in the formula to calculate average RSSI
++
++    <upper_threshold_x>
++        Above thresholds expressed in db, in ascending
++        order
++
++    <lower_threshold_x>
++        Below thresholds expressed in db, in ascending
++        order
++
++    <pollTimer>
++        The signal strength sampling frequency in
++        seconds. If polltime = 0, signal strength
++        sampling is disabled
++
++Command Values
++    None
++
++Reset Value
++    None defined
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    START_SCAN
++
++Synopsis
++    The host uses this command to start a long or short channel scan. All future scans are
++    relative to the time the AR6000 device processes this command. The device performs
++    a channel scan on receipt of this command, even if a scan was already in progress.
++    The host uses this command when it wishes to refresh its cached database of wireless
++    networks. The isLegacy field will be removed (0 for now) because it is achieved by
++    setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also
++    \93Scan and Roam\94
++
++Command
++    wmiconfig eth1 --startscan <scan type> <forcefgscan> 0
++    <homeDwellTime> <forceScanInterval>
++
++Command Parameters
++    UINT8    scanType
++        WMI_SCAN_TYPE
++
++Command Values
++    {
++        WMI_LONG_SCAN    =0x0
++            Requests a full scan
++        WMI_SHORT_SCAN   =0x1
++            Requests a short scan
++    } WMI_SCAN_TYPE
++
++    A_BOOL    forceFgScan
++        forceFgScan
++        = 0
++        Disable the foreground scan
++
++        forceFgScan
++        = 1
++        Forces a foreground scan
++
++    A_UINT32    homeDwellTime
++        Maximum duration in the home
++        channel (in ms)
++
++    A_UINT32     forceScanInterval
++        Time interval between scans (in ms)
++
++    A_UINT32     scanType
++        WMI_SCAN_TYPE
++
++Reset Value
++    Disable forcing foreground scan
++
++Restrictions
++    isLegacy field will no longer be supported (pass as 0 for now)
++
++
++=====================================================================
++
++Name
++    SYNCHRONIZE
++
++Synopsis
++    The host uses this command to force a synchronization point between the command
++    and data paths
++
++Command
++    TBD
++
++Command Parameters
++    None
++
++
++
++Command Values
++    None
++
++
++
++Reset Values
++    None
++
++
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    TARGET_ERROR_REPORT_BITMASK
++
++Synopsis
++    Allows the host to control \93ERROR_REPORT\94 events from the AR6000 device.
++
++        If error reporting is disabled for an error type, a count of errors of that type is
++        maintained by the device.
++
++        If error reporting is enabled for an error type, an \93ERROR_REPORT\94 event is
++        sent when an error occurs and the error report bit is cleared.
++
++    Error counts for each error type are available through the \93GET_TARGET_STATS\94
++    command.
++
++Command
++    wmiconfig eth1 --setErrorReportingBitmask
++
++Command Parameters
++    UINT32    bitmask
++        Represents the set of
++        WMI_TARGET_ERROR_VAL error types
++        enabled for reporting
++
++Command Values
++    {
++        WMI_TARGET_PM_ERR_FAIL    = 0x00000001
++            Power save fails (only two cases):
++               Retry out of null function/QoS null
++               function to associated AP for PS
++               indication'
++               Host changes the PS setting when
++               STA is off home channel
++
++        WMI_TARGET_KEY_NOT_FOUND    = 0x00000002
++            No cipher key
++        WMI_TARGET_DECRYPTION_ERR   = 0x00000004
++            Decryption error
++        WMI_TARGET_BMISS            = 0x00000008
++            Beacon miss
++        WMI_PSDISABLE_NODE_JOIN     = 0x00000010
++            A non-PS-enabled STA joined the
++            PS-enabled network
++        WMI_TARGET_COM_ERR          = 0x00000020
++            Host/target communication error
++        WMI_TARGET_FATAL_ERR        = 0x00000040
++            Fatal error
++    } WMI_TARGET_ERROR_VAL
++
++Reset Values
++    Bitmask is 0, and all error reporting is disabled
++
++Restrictions
++    None
++
++
++=====================================================================
++WMI Events
++
++Event
++    Description
++    Page
++
++
++BSSINFO
++    Contains information describing BSSs collected during a scan
++
++CAC_EVENTID
++    Indicates signalling events in admission control
++
++CMDERROR
++    The AR6000 device encounters an error while attempting to process
++    a command
++
++CONNECT
++    The device has connected to a wireless network
++
++DISCONNECT
++    The device lost connectivity with a wireless network
++
++ERROR_REPORT
++    An error has occurred for which the host previously requested
++    notification with the command
++    \93TARGET_ERROR_REPORT_BITMASK\94
++
++EXTENSION
++    WMI extension event
++
++GET_PMKID_LIST_EVENT
++    Created in response to a \93GET_PMKID_LIST_CMD\94 command
++
++GET_WOW_LIST_EVENT
++    Response to the wmiconfig \93GET_WOW_LIST\94 command to
++    retrieve the configured WoW patterns
++
++NEIGHBOR_REPORT
++    Neighbor APs that match the current profile were detected
++
++OPT_RX_FRAME_EVENT
++    (Special feature) informs the host of the reception of a special frame
++
++PSTREAM_TIMEOUT
++    A prioritized stream has been idle for a specified interval
++
++READY
++    The AR6000 device is ready to accept commands
++
++REGDOMAIN
++    The regulatory domain has changed
++
++REPORT_ROAM_DATA_EVENT
++    Reports the roam time calculations made by the device
++    (generated with a special build)
++    \97
++
++REPORT_STATISTICS
++    Reply to a \93GET_TARGET_STATS\94 command
++
++ROAM_TBL_EVENT
++    Reports the roam table
++
++RSSI_THRESHOLD
++    Signal strength from the connected AP has crossed the threshold
++    defined in the \93RSSI_THRESHOLD_PARAMS\94 command
++
++SCAN_COMPLETE_EVENT
++    A scan has completed (added status SCAN_ABORTED in release 2.0)
++
++TEST_EVENT
++    Event generated by the TCMD
++
++TKIP_MICERROR
++    TKIP MIC errors were detected
++
++=====================================================================
++
++Name
++    BSSINFO
++
++Synopsis
++    Contains information describing one or more BSSs as collected during a scan.
++    Information includes the BSSID, SSID, RSSI, network type, channel, supported rates,
++    and IEs. BSSINFO events are sent only after the device receives a beacon or probe-
++    response frame that pass the filter specified in the \93SET_BSS_FILTER\94 command.
++    BSSINFO events consist of a small header followed by a copy of the beacon or probe
++    response frame. The 802.11 header is not present. For formats of beacon and probe-
++    response frames please consult the IEEE 802.11 specification.
++
++    The beacons or probe responses containing the IE specified by the
++    WMI_BSS_FILTER_CMD are passed to the host through the
++    WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that
++    were detected in the management frame. The frame type field has been extended to
++    indicate action management frames. This would be helpful to route these frames
++    through the same event mechanism as used by the beacon processing function.
++
++    If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant
++    because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the
++    beacons/probe respones, then the ieMask match dictates whether the BSSINFO
++    event is sent to the host. In the case of action management frames, the ieMask is the
++    filter that is applied.
++
++Event ID
++    0x1004
++
++Event Parameters
++    typedef struct {
++        A_UINT16    channel;
++            Specifies the frequency (in MHz) where the
++            frame was received
++        A_UINT8    frameType;
++            A WMI_BI_FTYPE value
++        A_UINT8    snr;
++        A_INT16    rssi;
++            Indicates signal strength
++        A_UINT8    bssid[ATH_MAC_LEN];
++        A_UINT32    ieMask;
++    } _ATTRIB_PACK_WMI_BSS_INFO_HDR;
++
++    Beacon or Probe Response Frame
++
++Event Values
++    {
++        BEACON_FTYPE    = 0x1
++            Indicates a beacon frame
++        PROBERESP_FTYPE
++            Indicates a probe response frame
++        ACTION_MGMT_FTYPE
++     } WMI_BI_FTYPE
++
++=====================================================================
++
++Name
++    CAC_EVENTID
++
++Synopsis
++    Indicates signalling events in admission control. Events are generated when
++    admission is accepted, rejected, or deleted by either the host or the AP. If the AP does
++    not respond to an admission request within a timeout of 500 ms, an event is
++    generated to the host.
++
++Event ID
++    0x1011
++
++Event Parameters
++    UINT8
++    ac
++    Access class pertaining to the
++signalling
++
++    UINT8    cac_indication
++        Type of indication; indications are
++        listed in WMI_CAC_INDICATION
++
++    UINT8    statusCode
++        AP response status code for a
++        request
++
++    UINT8    tspecSuggestion[63]
++        Suggested TSPEC from AP
++
++Event Values
++    {
++        CAC_INDICATION_ADMISSION = 0x00
++        CAC_INDICATION_ADMISSION_RESP    = 0x01
++        CAC_INDICATION_DELETE    = 0x02
++        CAC_INDICATION_NO_RESP   = 0x03
++    } WMI_CAC_INDICATION
++
++
++=====================================================================
++
++
++Name
++    CMDERROR
++
++Synopsis
++    Indicates that the AR6000 device encountered an error while attempting to process a
++    command. This error is fatal and indicates that the device requires a reset.
++
++Event ID
++    0x1005
++
++Event Parameters
++    UINT16    commandId
++        Corresponds to the command which generated
++        the error
++    UINT8    errorCode
++        A WMI_ERROR_CODE value
++
++Event Values
++    {
++        INVALID_PARAM    = 1
++            Invalid parameter
++        ILLEGAL_STATE    = 2
++            Illegal state
++        INTERNAL_ERROR   = 3
++            Internal Error
++        All other values reserved
++    } WMI_ERROR_CODE
++
++
++=====================================================================
++
++
++Name
++    CONNECT
++
++Synopsis
++    Signals that the AR6000 connected to a wireless network. Connection occurs due to a
++    \93CONNECT\94 command or roaming to a new AP. For infrastructure networks, shows
++    that the AR6000 successfully performed 802.11 authentication and AP association.
++
++Event ID
++    0x1002
++
++Event Parameters
++    UINT16    channel
++        Channel frequency (in MHz) of the network the
++        AR6000 are connected to
++
++    UINT8    bssid[6]
++        MAC address of the AP the AR6000 are
++        connected to or the BSSID of the ad hoc
++        network
++
++    UINT16    listenInterval
++        Listen interval (in Kms) that the AR6000 are
++        using
++
++    UINT 8    beaconIeLen
++        Length (in bytes) of the beacon IEs
++
++    UINT8    assocInfo
++        Pointer to an array containing beacon IEs,
++        followed first by association request IEs then by
++        association response IEs
++
++    UINT8    assocReqLen
++        Length (in bytes) of the assocReqIEs array
++
++    UINT8    assocRespLen
++        Length (in bytes) of the assocRespIEs array
++
++Event Values
++    None defined
++
++=====================================================================
++
++
++Name
++    DISCONNECT
++
++Synopsis
++    Signals that the AR6000 device lost connectivity with the wireless network.
++    DISCONENCT is generated when the device fails to complete a \93CONNECT\94
++    command or as a result of a transition from a connected state to disconnected state.
++
++    After sending the \93DISCONNECT\94 event the device continually tries to re-establish
++    a connection. A LOST_LINK occurs when STA cannot receive beacons within the
++    specified time for the SET_BMISS_TIME command.
++
++Event ID
++    0x1003
++
++Event Parameters
++    UINT8    disconnect
++        Reason
++        A WMI_DISCONNECT_REASON value
++
++    UINT8    bssid[6]
++        Indicates which BSS the device was connected to
++
++    UINT8    assocRespLen
++        Length of the 802.11 association response frame
++        that triggered this event, or 0 if not applicable
++
++    UINT8    assocInfo[assocRespLen]
++        Copy of the 802.11 association response frame
++
++Event Values
++    {
++        NO_NETWORK_AVAIL    =0x01
++            Indicates that the device was unable to
++            establish or find the desired network
++        LOST_LINK    =0x02
++            Indicates the devices is no longer receiving
++            beacons from the BSS it was previously
++            connected to
++
++        DISCONNECT_CMD  =0x03
++            Indicates a \93DISCONNECT\94 command was
++            processed
++        BSS_DISCONNECTED =0x04
++            Indicates the BSS explicitly disconnected the
++            device. Possible mechanisms include the AP
++            sending 802.11 management frames
++            (e.g., disassociate or deauthentication
++            messages).
++        AUTH_FAILED    =0x05
++            Indicates that the device failed 802.11
++            authentication with the BSS
++        ASSOC_FAILED    =0x06
++            Indicates that the device failed 802.11
++            association with the BSS
++        NO_RESOURCES_AVAIL    =0x07
++            Indicates that a connection failed because the
++            AP had insufficient resources to complete the
++            connection
++        CSERV_DISCONNECT    =0x08
++            Indicates that the device\92s connection services
++            module decided to disconnect from a BSS,
++            which can happen for a variety of reasons (e.g.,
++            the host marks the current connected AP as a
++            bad AP).
++        INVALID_PROFILE    =0x0A
++            Indicates that an attempt was made to
++            reconnect to a BSS that no longer matches the
++            current profile
++        All other values are reserved
++    } WMI_DISCONNECT_REASON
++
++
++=====================================================================
++
++
++Name
++    ERROR_REPORT
++
++Synopsis
++    Signals that a type of error has occurred for which the host previously requested
++    notification through the \93TARGET_ERROR_REPORT_BITMASK\94 command.
++
++Event ID
++    0x100D
++
++Event Parameters
++    UINT32    errorVal
++            WMI_TARGET_ERROR_VAL value. See
++            \93TARGET_ERROR_REPORT_BITMASK\94.
++
++Event Values
++    errorVal
++    = 0x00000001
++    Power save fails
++
++        = 0x00000002
++    No cipher key
++
++        = 0x00000004
++    Decryption error
++
++        = 0x00000008
++    Beacon miss
++
++        = 0x00000010
++    A non-power save disabled node has joined
++    the PS-enabled network
++
++
++=====================================================================
++
++
++Name
++    EXTENSION
++
++Synopsis
++    The WMI is used mostly for wireless control messages to a wireless module that
++    apply to wireless module management regardless of the target platform
++    implementation. However, some events peripherally related to wireless management
++    are desired during operation. These wireless extension events may be platform-
++    specific or implementation-dependent. See \93WMI Extension Commands\94
++
++
++Event ID
++    0x1010
++
++
++=====================================================================
++
++
++Name
++    GET_PMKID_LIST_EVENT
++
++Synopsis
++    Generated by firmware in response to a \93GET_PMKID_LIST_CMD\94 command.
++
++Event Parameters
++    typedef struct {
++        A_UINT32    numPMKID;
++            Contains the number of PMKIDs in the reply
++        WMI_PMKID   pmkidList[1];
++    } __ATTRIB_PACK WMI_PMKID_LIST_REPLY;
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++Name
++    GET_WOW_LIST_EVENT
++
++Synopsis
++    Response to the wmiconfig \96getwowlist command to retrieve the configured Wake on
++    Wireless patterns
++
++Event ID
++    0x10018
++
++Event Parameters
++    {
++
++    A_UINT8    num_filters
++        Total number of patterns in the list
++    A_UINT8    this_filter_num
++        The filter number
++    A_UINT8    wow_mode
++        Shows whether WoW is enabled or disabled
++    A_UINT8    host_mode
++        Shows whether the host is asleep or awake
++    WOW_FILTER    wow_filters[1]
++        List of WoW filters (pattern and mask data bytes)
++    } WMI_GET_WOW_LIST_REPLY;
++
++    {
++        Each wow_filter_list element shows:
++    A_UINT8    wow_valid_filter
++        Whether the filter is valid
++    A_UINT8    wow_filter_list_id
++        Filter List ID (23 = default)
++    A_UINT8    wow_filter_size
++        Size in bytes of the filter
++    A_UINT8    wow_filter_offset
++        Offset of the pattern to search in the data packet
++    A_UINT8    wow_filter_mask[MASK_SIZE]
++        The mask to be applied to the pattern
++    A_UINT8    wow_filter_pattern[WOW_PATTERN_SIZE]
++        The pattern that to match to wake up the host
++    } WOW_FILTER
++
++Event Values
++    None
++
++=====================================================================
++
++
++
++Name
++    NEIGHBOR_REPORT
++
++Synopsis
++    Indicates the existence of neighbor APs that match the current profile. The host uses
++    this event to populate the PMKID cache on the AR6000 and/or to perform
++    preauthentication. This event is only generated in infrastructure mode.
++
++    A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP.
++
++Event ID
++    0x1008
++
++Event Parameters
++    UINT8    numberOfAps
++        The number of APs reported about in
++        this event
++    {
++        UINT8    bssid[6]
++            MAC address of a neighbor AP
++        UINT8    bssFlags
++            A WMI_BSS_FLAGS value
++    }[numberOfAps]
++
++
++Event Values
++    {
++        WMI_DEFAULT_BSS_FLAGS    = 0
++            Logical OR of 1 or more
++        WMI_BSS_FLAGS
++        WMI_PREAUTH_CAPABLE_BSS
++            = 1
++            Indicates that this AP is capable of
++            preauthentication
++        WMI_PMKID_VALID_BSS
++            = 2
++            Indicates that the AR6000 have a
++            valid pairwise master key for this AP
++    } WMI_BSS_FLAGS
++
++
++=====================================================================
++
++
++
++Name
++    OPT_RX_FRAME_EVENT
++
++Synopsis
++    Special feature, informs host of the reception of a special frame.
++
++Event ID
++    0x100E
++
++Event Parameters
++    {
++        A_UINT16    channel;
++        A_UINT8    frameType;
++        A_INT8    snr;
++        A_UINT8    srcAddr[ATH_MAC_LEN];
++        A_UINT8    bssid[ATH_MAC_LEN];
++        }WMI_OPT_RX_INFO_HDR
++
++Event Values
++    None
++
++=====================================================================
++
++
++
++Name
++    PSTREAM_TIMEOUT
++
++Synopsis
++    Indicates that a priority stream that got created as a result of priority-marked data
++    flow (priority marked in IP TOS) being idle for the default inactivity interval period
++    (specified in the \93CREATE_PSTREAM\94 command) used for priority streams created
++    implicitly by the driver. This event is not indicated for user-created priority streams.
++    User-created priority streams exist until the users delete them explicitly. They do not
++    timeout due to data inactivity.
++
++Event ID
++    0x1007
++
++Event Parameters
++    A_UINT8
++    trafficClass
++    Indicated the traffic class of priority
++    stream that timed out
++
++Event Values
++    {
++        WMM_AC_BE    = 0
++            Best effort
++        WMM_AC_BK    = 1
++            Background
++        WMM_AC_VI    = 2
++            Video
++        WMM_AC_VO     = 3
++            Voice
++    } TRAFFIC CLASS
++
++
++=====================================================================
++
++Name
++    READY
++
++Synopsis
++    Indicates that the AR6000 device is prepared to accept commands. It is sent once after
++    power on or reset. It also indicates the MAC address of the device.
++
++Event ID
++    0x1001
++
++Event Parameters
++    UINT8    macAddr[6]
++        Device MAC address
++    UINT8    phyCapability
++        A WMI_PHY_CAPABILITY value. Indicates the
++        capabilities of the device wireless module\92s radio
++
++Event Values
++    {
++        WMI_11A_CAPABILITY       = 1
++        WMI_11G_CAPABILITY       = 2
++        WMI_11AG_CAPABILITY      = 3
++    } WMI_PHY_CAPABILITY
++
++
++=====================================================================
++
++Name
++    REGDOMAIN
++
++Synopsis
++    Indicates that the regulatory domain has changed. It initially occurs when the
++    AR6000 device reads the board data information. The regulatory domain can also
++    change when the device is a world-mode SKU. In this case, the regulatory domain is
++    based on the country advertised by APs per the IEEE 802.11d specification. A
++    potential side effect of a regulatory domain change is a change in the list of available
++    channels. Any channel restrictions that exist as a result of a previous
++    \93SET_CHANNEL_PARAMETERS\94 command are lifted.
++
++Event ID
++    0x1006
++
++Event Parameters
++    UINT32    regDomain
++        The range of 0x0000 \96 0x00FF
++        corresponds to an ISO country code.
++
++    Other regCodes are reserved for world
++    mode settings and specific regulatory
++    domains.
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    REPORT_STATISTICS
++
++Synopsis
++    A reply to a \93GET_TARGET_STATS\94 command.
++
++Event ID
++    0x100B
++
++Event Parameters
++    When the statistics are sent to the host, the AR6001 clear them so that a new set of
++    statistics are collected for the next report.
++
++    UINT32    tx_packets
++    UINT32    tx_bytes
++    UINT32    tx_unicast_pkts
++    UINT32    tx_unicast_bytes
++    UINT32    tx_multicast_pkts
++    UINT32    tx_multicast_bytes
++    UINT32    tx_broadcast_pkts
++    UINT32    tx_broadcast_bytes
++    UINT32    tx_rts_success_cnt
++    UINT32    tx_packet_per_ac[4]
++        Tx packets per AC: [0] = BE, [1] = BK,
++        [2] = VI, [3] = VO
++    UINT32    tx_errors
++        Number of packets which failed Tx, due
++        to all failures
++    ... REPORT_STATISTICS, continued
++    UINT32    tx_failed_cnt
++        Number of data packets that failed Tx
++    UINT32    tx_retry_cnt
++        Number of Tx retries for all packets
++    UINT32    tx_rts_fail_cnt
++        Number of RTS Tx failed count
++    UINT32    rx_packets
++    UINT32    rx_bytes
++    UINT32    rx_unicast_pkts
++    UINT32    rx_unicast_bytes
++    UINT32    rx_multicast_pkts
++    UINT32    rx_multicast_bytes
++    UINT32    rx_broadcast_pkts
++    UINT32    rx_broadcast_bytes
++    UINT32    rx_fragment_pkt
++        Number of fragmented packets received
++    UINT32    rx_errors
++        Number of Rx errors due to all failures
++    UINT32    rx_crcerr
++        Number of Rx errors due to CRC errors
++    UINT32    rx_key_cache_miss
++        Number of Rx errors due to a key not
++        being plumbed
++    UINT32    rx_decrypt_err
++        Number of Rx errors due to decryption
++        failure
++    UINT32    rx_duplicate_frames
++        Number of duplicate frames received
++    UINT32    tkip_local_mic_failure
++        Number of TKIP MIC errors detected
++    UINT32    tkip_counter_measures_invoked
++        Number of times TKIP countermeasures
++        were invoked
++    UINT32    tkip_replays
++        Number of frames that replayed a TKIP
++        encrypted frame received earlier
++    UINT32    tkip_format_errors
++        Number of frames that did not conform
++        to the TKIP frame format
++    UINT32    ccmp_format_errors
++        Number of frames that did not conform
++        to the CCMP frame format
++    UINT32    ccmp_replays
++        Number of frames that replayed a CCMP
++        encrypted frame received earlier
++    UINT32    power_save_failure_cnt
++        Number of failures that occurred when
++        the AR6001 could not go to sleep
++    UINT32    cs_bmiss_cnt
++        Number of BMISS interrupts since
++    connection
++    UINT32    cs_lowRssi_cnt
++        Number of the times the RSSI went below
++        the low RSSI threshold
++    UINT16    cs_connect_cnt
++        Number of connection times
++    UINT16    cs_disconnect_cnt
++        Number of disconnection times
++    UINT8    cs_aveBeacon_rssi
++        The current averaged value of the RSSI
++        from the beacons of the connected BSS
++    UINT8    cs_lastRoam_msec
++        Time that the last roaming took, in ms.
++        This time is the difference between
++        roaming start and actual connection.
++
++Event Values
++    None defined
++
++
++=====================================================================
++
++Name
++    ROAM_TBL_EVENT
++
++Synopsis
++    Reports the roam table, which contains the current roam mode and this information
++    for every BSS:
++
++Event ID
++    0x100F
++
++Event Parameters
++    A_UINT8     bssid[ATH_MAC_LEN];
++        BSSID
++    A_UINT8     rssi
++        Averaged RSSI
++    A_UINT8     rssidt
++        Change in RSSI
++    A_UINT8     last_rssi
++        Last recorded RSSI
++    A_UINT8     roam_util
++        Utility value used in roaming decision
++    A_UINT8     util
++        Base utility with the BSS
++    A_UINT8     bias
++        Host configured for this BSS
++
++Event Values
++    roamMode
++        Current roam mode
++
++        = 1
++    RSSI based roam
++
++        = 2
++    Host bias-based roam
++
++        = 3
++    Lock to the current BSS
++
++        = 4
++    Autonomous roaming disabled
++
++
++=====================================================================
++
++Name
++    RSSI_THRESHOLD
++
++Synopsis
++    Alerts the host that the signal strength from the connected AP has crossed a
++    interesting threshold as defined in a previous \93RSSI_THRESHOLD_PARAMS\94
++    command.
++
++Event ID
++    0x100C
++
++Event Parameters
++    UINT8    range
++        A WMI_RSSI_THRESHOLD_VAL
++        value, which indicates the range of
++        the average signal strength
++
++Event Values
++    {
++        WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL  = 1
++        WMI_RSSI_LOWTHRESHOLD_LOWERVAL        = 2
++        WMI_RSSI_LOWTHRESHOLD_UPPERVAL        = 3
++        WMI_RSSI_HIGHTHRESHOLD_LOWERVAL       = 4
++        WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL      = 5
++    } WMI_RSSI_THRESHOLD_VAL
++
++
++=====================================================================
++
++Name
++    SCAN_COMPLETE_EVENT
++
++Synopsis
++    Indicates the scan status. if the Scan was not completed, this event is generated with
++    the status A_ECANCELED.
++
++Event ID
++    0x100A
++
++Event Parameters
++    A_UINT8    scanStatus
++
++Event Values
++    {
++        #define     SCAN_ABORTED 16
++        #define     SCAN_COMPLETED 0
++        A_UINT8     scanStatus
++            A_OK or A_ECANCELED
++    } WMI_SCAN_COMPLETE_EVENT;
++
++
++=====================================================================
++
++Name
++    TEST_EVENT
++
++Synopsis
++    The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to
++    communicate events from target to host. The events are parsed by the TCMD
++    application and WMI layer is oblivious of it.
++
++Event ID
++    0x1016
++
++Event Parameters
++    WMI_TEST_EVENTID
++
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    TKIP_MICERR
++
++Synopsis
++    Indicates that TKIP MIC errors were detected.
++
++Event ID
++    0x1009
++
++Event Parameters
++    UINT8    keyid
++        Indicates the TKIP key ID
++
++    UINT8    ismcast
++        0 = Unicast
++        1 = Multicast
++
++Event Values
++    See event parameters
++
++=====================================================================
++
++WMI Extension Commands
++
++The WMI EXTENSION command is used to multiplex a collection of
++commands that:
++
++        Are not generic wireless commands
++        May be implementation-specific
++        May be target platform-specific
++        May be optional for a host implementation
++
++    An extension command is sent to the AR6000 targets like any other WMI
++command message and uses the WMI_EXTENSION. The first field of the
++payload for this EXTENSION command is another commandId, sometimes
++called the subcommandId, which indicates which extension command is
++being used. A subcommandId-specific payload follows the subcommandId.
++
++All extensions (subcommandIds) are listed in the header file include/wmix.h.
++See also \93WMI Extension Events\94 on page B-58.
++
++
++WMI Extension Commands
++
++
++GPIO_INPUT_GET
++    Read GPIO pins configured for input
++
++GPIO_INTR_ACK
++    Acknowledge and re-arm GPIO interrupts reported earlier
++
++GPIO_OUTPUT_SET
++    Manage output on GPIO pins configured for output
++
++GPIO_REGISTER_GET
++    Read an arbitrary GPIO register
++
++GPIO_REGISTER_SET
++    Dynamically change GPIO configuration
++
++SET_LQTHRESHOLD
++    Set link quality thresholds; the sampling happens at every unicast
++    data frame Tx, if certain thresholds are met, and corresponding
++    events are sent to the host
++
++
++=====================================================================
++
++Name
++    GPIO_INPUT_GET
++
++Synopsis
++    Allows the host to read GPIO pins that are configured for input. The values read are
++    returned through a \93GPIO_DATA\94 extension event.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    None
++
++
++
++Reply Parameters
++    None
++
++
++Reset Value
++    None
++
++
++
++Restrictions
++    None
++
++=====================================================================
++
++
++Name
++    GPIO_INTR_ACK
++
++Synopsis
++    The host uses this command to acknowledge and to re-arm GPIO interrupts reported
++    through an earlier \93GPIO_INTR\94 extension event. A single \93GPIO_INTR_ACK\94
++    command should be used to acknowledge all GPIO interrupts that the host knows to
++    be outstanding (if pending interrupts are not acknowledged through
++    \93GPIO_INTR_ACK\94, another \93GPIO_INTR\94 extension event is raised).
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    ack_mask
++        A mask of interrupting GPIO pins (e.g., ack_mask
++        bit [3] acknowledges an interrupt from the pin GPIO3).
++
++Command Values
++    None
++
++Reset Value
++    None
++
++Restrictions
++    The host should acknowledge only interrupts about which it was notified.
++
++
++=====================================================================
++
++Name
++    GPIO_OUTPUT_SET
++
++Synopsis
++    Manages output on GPIO pins configured for output.
++
++    Conflicts between set_mask and clear_mask or enable_mask and disable_mask result
++    in undefined behavior.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    set_mask
++        Specifies which pins should drive a 1 out
++    UINT32    clear_mask
++        Specifies which pins should drive a 0 out
++    UINT32    enable_mask
++        Specifies which pins should be enabled for output
++    UINT32    disable_mask
++        Specifies which pins should be disabled for output
++
++Command Values
++    None
++
++
++Reset Value
++    None
++
++
++Restrictions
++    None
++
++
++
++=====================================================================
++
++
++Name
++    GPIO_REGISTER_GET
++
++Synopsis
++    Allows the host to read an arbitrary GPIO register. It is intended for use during
++    bringup/debug. The target responds to this command with a \93GPIO_DATA\94 event.
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32
++    gpioreg_id
++    Specifies a GPIO register identifier, as defined
++in include/AR6000/AR6000_gpio.h
++
++Reply Parameters
++    None
++
++Reset Value
++    N/A
++
++Restrictions
++    None
++
++
++=====================================================================
++
++Name
++    GPIO_REGISTER_SET
++
++Synopsis
++    Allows the host to dynamically change GPIO configuration (usually handled
++    statically through the GPIO configuration DataSet).
++
++NOTE: Support for GPIO is optional.
++
++Command
++    N/A
++
++Command Parameters
++    UINT32    gpioreg_id
++        Specifies a GPIO register identifier, as defined in
++        include/AR6000/AR6000_gpio.h
++    UINT32    value
++        Specifies a value to write to the specified
++        GPIO register
++
++Command Values
++    None
++
++
++Reset Value
++    Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM
++    Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This
++    configuration is modified by the GPIO Configuration DataSet, if one exists.
++
++Restrictions
++    None
++
++
++=====================================================================
++
++
++Name
++    SET_LQTHRESHOLD
++
++Synopsis
++    Set link quality thresholds, the sampling happens at every unicast data frame Tx, if
++    certain threshold is met, corresponding event will be sent to host.
++
++Command
++    wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>...
++    <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4>
++
++Command Parameters
++    A_UINT8   enable;
++    A_UINT8   thresholdAbove1_Val;
++    A_UINT8   thresholdAbove2_Val;
++    A_UINT8   thresholdAbove3_Val;
++    A_UINT8   thresholdAbove4_Val;
++    A_UINT8   thresholdBelow1_Val;
++    A_UINT8   thresholdBelow2_Val;
++    A_UINT8   thresholdBelow3_Val;
++    A_UINT8   thresholdBelow4_Val;
++
++Command Values
++    enable
++    = 0
++    Disable link quality sampling
++
++        = 1
++    Enable link quality sampling
++
++
++    thresholdAbove_Val
++    [1...4]
++    Above thresholds (value in [0,100]), in ascending
++    order threshold
++
++    Below_Val [1...4] = below thresholds (value
++    in [0,100]), in ascending order
++
++Reset Values
++    None
++
++Restrictions
++    None
++
++=====================================================================
++WMI Extension Events
++
++The WMI EXTENSION event is used for a collection of events that:
++
++    Are not generic wireless events
++    May be implementation-specific
++    May be target platform-specific
++    May be optional for a host implementation
++
++    An extension event is sent from the AR6000 device targets to the host just like
++any other WMI event message, using the WMI_EXTENSION_EVENTID. The
++first field of the payload for this \93EXTENSION\94 event is another commandId
++(sometimes called the subcommandId) that indicates which \93EXTENSION\94
++event is being used. A subcommandId-specific payload follows the
++subcommandId.
++
++All extensions (subcommandIds) are listed in the header file include/wmix.h.
++See also \93WMI Extension Commands\94 on page B-55.
++
++
++WMI Extension Events
++
++
++GPIO_ACK
++    Acknowledges a host set command has been processed by the device
++
++GPIO_DATA
++    Response to a host\92s request for data
++
++GPIO_INTR
++    Signals that GPIO interrupts are pending
++
++
++=====================================================================
++
++Name
++    GPIO_ACK
++
++Synopsis
++    Acknowledges that a host set command (either \93GPIO_OUTPUT_SET\94 or
++    \93GPIO_REGISTER_SET\94) has been processed by the AR6000 device.
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    None
++
++
++Event Values
++    None
++
++=====================================================================
++
++
++Name
++    GPIO_DATA
++
++Synopsis
++    The AR6000 device uses this event to respond to the host\92s earlier request for data
++    (through either a \93GPIO_REGISTER_GET\94 or a \93GPIO_INPUT_GET\94 command).
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    UINT32    value
++        Holds the data of interest, which is either a register value
++        (in the case of \93GPIO_REGISTER_GET\94) or a mask of
++        pin inputs (in the case of \93GPIO_INPUT_GET\94).
++    UINT32    reg_id
++        Indicates which register was read (in the case of
++        \93GPIO_REGISTER_GET\94) or is GPIO_ID_NONE (in the
++        case of \93GPIO_INPUT_GET\94)
++
++Event Values
++    None
++
++
++=====================================================================
++
++
++
++Name
++    GPIO_INTR
++
++Synopsis
++    The AR6000 device raises this event to signal that GPIO interrupts are pending.
++    These GPIOs may be interrupts that occurred after the last \93GPIO_INTR_ACK\94
++    command was issued, or may be GPIO interrupts that the host failed to acknowledge
++    in the last \93GPIO_INTR_ACK\94. The AR6000 will not raise another GPIO_INTR
++    event until this event is acknowledged through a \93GPIO_INTR_ACK\94 command.
++
++NOTE: Support for GPIO is optional.
++
++Event ID
++    N/A
++
++Event Parameters
++    UINT32    intr_mask
++        Indicates which GPIO interrupts are currently pending
++
++    UINT32    input_values
++        A recent copy of the GPIO input values, taken at the
++        time the most recent GPIO interrupt was processed
++
++Event Values
++    None
++
++
++
++=====================================================================
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi_host.h linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi_host.h
+--- linux-2.6.29-rc3.owrt/drivers/ar6000/wmi/wmi_host.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/ar6000/wmi/wmi_host.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,71 @@
++#ifndef _WMI_HOST_H_
++#define _WMI_HOST_H_
++/*
++ * Copyright (c) 2004-2006 Atheros Communications Inc.
++ * All rights reserved.
++ *
++ * This file contains local definitios for the wmi host module.
++ *
++ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  Software distributed under the License is distributed on an "AS
++ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
++ *  implied. See the License for the specific language governing
++ *  rights and limitations under the License.
++ *
++ *
++ *
++ */
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++struct wmi_stats {
++    A_UINT32    cmd_len_err;
++    A_UINT32    cmd_id_err;
++};
++
++struct wmi_t {
++    A_BOOL                          wmi_ready;
++    A_BOOL                          wmi_numQoSStream;
++    A_UINT8                         wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT];
++    WMI_PRI_STREAM_ID               wmi_ac2WmiStreamMapping[WMM_NUM_AC];
++    A_UINT16                        wmi_streamExistsForAC[WMM_NUM_AC];
++    A_UINT8                         wmi_fatPipeExists;
++    void                           *wmi_devt;
++    struct wmi_stats                wmi_stats;
++    struct ieee80211_node_table     wmi_scan_table;
++    A_UINT8                         wmi_bssid[ATH_MAC_LEN];
++    A_UINT8                         wmi_powerMode;
++    A_UINT8                         wmi_phyMode;
++    A_UINT8                         wmi_keepaliveInterval;
++    A_MUTEX_T                       wmi_lock;
++};
++
++#define WMI_INIT_WMISTREAM_AC_MAP(w) \
++{  (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \
++   (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \
++   (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \
++   (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \
++   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; }
++
++#define WMI_WMISTREAM_ACCESSCATEGORY(w,s)      (w)->wmi_wmiStream2AcMapping[s]
++#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac)       (w)->wmi_ac2WmiStreamMapping[ac]
++
++#define LOCK_WMI(w)     A_MUTEX_LOCK(&(w)->wmi_lock);
++#define UNLOCK_WMI(w)   A_MUTEX_UNLOCK(&(w)->wmi_lock);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _WMI_HOST_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/base/bus.c linux-2.6.29-rc3.owrt.om/drivers/base/bus.c
+--- linux-2.6.29-rc3.owrt/drivers/base/bus.c   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/base/bus.c        2009-05-10 22:27:59.000000000 +0200
+@@ -141,6 +141,29 @@
+ }
+ EXPORT_SYMBOL_GPL(bus_remove_file);
++int bus_create_device_link(struct bus_type *bus, struct kobject *target,
++                         const char *name)
++{
++      int error;
++      if (bus_get(bus)) {
++              error = sysfs_create_link(&bus->p->devices_kset->kobj, target,
++                                        name);
++              bus_put(bus);
++      } else
++              error = -EINVAL;
++      return error;
++}
++EXPORT_SYMBOL_GPL(bus_create_device_link);
++
++void bus_remove_device_link(struct bus_type *bus, const char *name)
++{
++      if (bus_get(bus)) {
++              sysfs_remove_link(&bus->p->devices_kset->kobj, name);
++              bus_put(bus);
++      }
++}
++EXPORT_SYMBOL_GPL(bus_remove_device_link);
++
+ static struct kobj_type bus_ktype = {
+       .sysfs_ops      = &bus_sysfs_ops,
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/base/core.c linux-2.6.29-rc3.owrt.om/drivers/base/core.c
+--- linux-2.6.29-rc3.owrt/drivers/base/core.c  2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/base/core.c       2009-05-10 22:27:59.000000000 +0200
+@@ -55,6 +55,11 @@
+  */
+ const char *dev_driver_string(const struct device *dev)
+ {
++      if (!dev) {
++              printk(KERN_ERR"Null dev to dev_driver_string\n");
++              dump_stack();
++              return "*NULL*";
++      }
+       return dev->driver ? dev->driver->name :
+                       (dev->bus ? dev->bus->name :
+                       (dev->class ? dev->class->name : ""));
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/base/power/main.c linux-2.6.29-rc3.owrt.om/drivers/base/power/main.c
+--- linux-2.6.29-rc3.owrt/drivers/base/power/main.c    2009-05-10 22:08:41.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/base/power/main.c 2009-05-10 22:27:59.000000000 +0200
+@@ -69,9 +69,9 @@
+  */
+ void device_pm_add(struct device *dev)
+ {
+-      pr_debug("PM: Adding info for %s:%s\n",
++      /* pr_debug("PM: Adding info for %s:%s\n",
+                dev->bus ? dev->bus->name : "No Bus",
+-               kobject_name(&dev->kobj));
++               kobject_name(&dev->kobj)); */
+       mutex_lock(&dpm_list_mtx);
+       if (dev->parent) {
+               if (dev->parent->power.status >= DPM_SUSPENDING)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/char/Kconfig linux-2.6.29-rc3.owrt.om/drivers/char/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/char/Kconfig 2009-05-10 22:08:42.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/char/Kconfig      2009-05-10 22:27:59.000000000 +0200
+@@ -66,6 +66,18 @@
+         If unsure, say Y.
++config NR_TTY_DEVICES
++      int "Maximum tty device number"
++      depends on VT
++      default 63
++      ---help---
++        This is the highest numbered device created in /dev. You will actually have
++        NR_TTY_DEVICES+1 devices in /dev. The default is 63, which will result in
++        64 /dev entries. The lowest number you can set is 11, anything below that, 
++        and it will default to 11. 63 is also the upper limit so we don't overrun
++        the serial consoles.
++
++
+ config HW_CONSOLE
+       bool
+       depends on VT && !S390 && !UML
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/gpio/gpiolib.c linux-2.6.29-rc3.owrt.om/drivers/gpio/gpiolib.c
+--- linux-2.6.29-rc3.owrt/drivers/gpio/gpiolib.c       2009-05-10 22:08:42.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/gpio/gpiolib.c    2009-05-10 22:27:59.000000000 +0200
+@@ -6,8 +6,7 @@
+ #include <linux/err.h>
+ #include <linux/debugfs.h>
+ #include <linux/seq_file.h>
+-#include <linux/gpio.h>
+-
++#include <mach/gpio.h>
+ /* Optional implementation infrastructure for GPIO interfaces.
+  *
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-s3c2410.c linux-2.6.29-rc3.owrt.om/drivers/i2c/busses/i2c-s3c2410.c
+--- linux-2.6.29-rc3.owrt/drivers/i2c/busses/i2c-s3c2410.c     2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/busses/i2c-s3c2410.c  2009-05-10 22:27:59.000000000 +0200
+@@ -34,9 +34,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
+ #include <linux/cpufreq.h>
++#include <linux/io.h>
+ #include <asm/irq.h>
+-#include <asm/io.h>
+ #include <plat/regs-iic.h>
+ #include <plat/iic.h>
+@@ -135,6 +135,14 @@
+       unsigned long tmp;
+       tmp = readl(i2c->regs + S3C2410_IICCON);
++
++/* S3c2442 datasheet
++ *
++ * If the IICCON[5]=0, IICCON[4] does not operate correctly.
++ * So, It is recommended that you should set IICCON[5]=1,
++ * although you does not use the IIC interrupt.
++ */
++
+       writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
+ }
+@@ -480,6 +488,15 @@
+       if (i2c->suspended)
+               return -EIO;
++      if (i2c->suspended) {
++              dev_err(i2c->dev,
++                  "Hey I am still asleep (suspended: %d), retry later\n",
++                  i2c->suspended);
++              dump_stack();
++              ret = -EAGAIN;
++              goto out;
++      }
++
+       ret = s3c24xx_i2c_set_master(i2c);
+       if (ret != 0) {
+               dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/busses/Kconfig linux-2.6.29-rc3.owrt.om/drivers/i2c/busses/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/i2c/busses/Kconfig   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/busses/Kconfig        2009-05-10 22:27:59.000000000 +0200
+@@ -455,11 +455,12 @@
+         I2C bus.
+ config I2C_S3C2410
+-      tristate "S3C2410 I2C Driver"
+-      depends on ARCH_S3C2410
++      tristate "Samsung SoC I2C Driver (S3C24XX and S3C64XX series)"
++      depends on ARCH_S3C2410 || ARCH_S3C64XX
+       help
+         Say Y here to include support for I2C controller in the
+-        Samsung S3C2410 based System-on-Chip devices.
++        Samsung S3C based System-on-Chip devices such as the S3C2410,
++        S3C2440, S3C2442, S3C2443 and S3C6410.
+ config I2C_SH7760
+       tristate "Renesas SH7760 I2C Controller"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/Kconfig linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/Kconfig    2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/Kconfig 2009-05-10 22:27:59.000000000 +0200
+@@ -16,6 +16,53 @@
+         This driver can also be built as a module.  If so, the module
+         will be called ds1682.
++config AT24
++      tristate "EEPROMs from most vendors"
++      depends on SYSFS && EXPERIMENTAL
++      help
++        Enable this driver to get read/write support to most I2C EEPROMs,
++        after you configure the driver to know about each EEPROM on
++        your target board.  Use these generic chip names, instead of
++        vendor-specific ones like at24c64 or 24lc02:
++
++           24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
++           24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
++
++        Unless you like data loss puzzles, always be sure that any chip
++        you configure as a 24c32 (32 kbit) or larger is NOT really a
++        24c16 (16 kbit) or smaller, and vice versa. Marking the chip
++        as read-only won't help recover from this. Also, if your chip
++        has any software write-protect mechanism you may want to review the
++        code to make sure this driver won't turn it on by accident.
++
++        If you use this with an SMBus adapter instead of an I2C adapter,
++        full functionality is not available.  Only smaller devices are
++        supported (24c16 and below, max 4 kByte).
++
++        This driver can also be built as a module.  If so, the module
++        will be called at24.
++
++config SENSORS_EEPROM
++      tristate "EEPROM reader"
++      depends on EXPERIMENTAL
++      help
++        If you say yes here you get read-only access to the EEPROM data
++        available on modern memory DIMMs and Sony Vaio laptops.  Such
++        EEPROMs could theoretically be available on other devices as well.
++
++        This driver can also be built as a module.  If so, the module
++        will be called eeprom.
++
++config SENSORS_PCF50606
++      tristate "Philips/NXP PCF50606"
++      depends on I2C
++      help
++        If you say yes here you get support for Philips/NXP PCF50606
++        PMU (Power Management Unit) chips.
++
++        This driver can also be built as a module.  If so, the module
++        will be called pcf50606.
++
+ config SENSORS_PCF8574
+       tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
+       depends on EXPERIMENTAL && GPIO_PCF857X = "n"
+@@ -102,4 +149,14 @@
+         This driver can also be built as a module.  If so, the module
+         will be called tsl2550.
++config PCA9632
++      tristate "Philips/NXP PCA9632 low power LED driver"
++      depends on I2C
++      help
++        If you say yes here you get support for the Philips/NXP PCA9632
++        LED driver.
++
++        This driver can also be built as a module.  If so, the module
++        will be called pca9632.
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/Makefile linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/Makefile   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/Makefile        2009-05-10 22:27:59.000000000 +0200
+@@ -13,10 +13,12 @@
+ obj-$(CONFIG_DS1682)          += ds1682.o
+ obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
+ obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
++obj-$(CONFIG_SENSORS_PCF50606)        += pcf50606.o
+ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
+ obj-$(CONFIG_PCF8575)         += pcf8575.o
+ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+ obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
++obj-$(CONFIG_PCA9632)         += pca9632.o
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/pca9632.c linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pca9632.c
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/pca9632.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pca9632.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,551 @@
++/*
++ *  Philips/NXP PCA9632 low power LED driver.
++ *  Copyright (C) 2008 Matt Hsu <matt_hsu@openmoko.org>
++ *
++ *  low_level implementation are based on pcf50606 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; version 2 of the License.
++ *
++ *  TODO:
++ *  - attach ledclass??
++ *  - add platform data
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++
++#include "pca9632.h"
++
++/* Addresses to scan */
++static unsigned short normal_i2c[] = { 0x62, I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD_1(pca9632);
++
++enum pca9632_pwr_state {
++      PCA9632_NORMAL,
++      PCA9632_SLEEP,
++};
++
++enum pca9632_led_output {
++      PCA9632_OFF,
++      PCA9632_ON,
++      PCA9632_CTRL_BY_PWM,
++      PCA9632_CTRL_BY_PWM_GRPPWM,
++};
++
++static const char *led_output_name[] = {
++      [PCA9632_OFF]                   = "off",
++      [PCA9632_ON]                    = "fully-on",
++      [PCA9632_CTRL_BY_PWM]           = "ctrl-by-pwm",
++      [PCA9632_CTRL_BY_PWM_GRPPWM]    = "ctrl-by-pwm-grppwm",
++};
++
++struct pca9632_data {
++      struct i2c_client client;
++      struct mutex lock;
++};
++
++static struct i2c_driver pca9632_driver;
++static struct platform_device *pca9632_pdev;
++
++static int pca9632_attach_adapter(struct i2c_adapter *adapter);
++static int pca9632_detach_client(struct i2c_client *client);
++
++static int __reg_write(struct pca9632_data *pca, u_int8_t reg, u_int8_t val)
++{
++      return i2c_smbus_write_byte_data(&pca->client, reg, val);
++}
++
++static int reg_write(struct pca9632_data *pca, u_int8_t reg, u_int8_t val)
++{
++      int ret;
++
++      mutex_lock(&pca->lock);
++      ret = __reg_write(pca, reg, val);
++      mutex_unlock(&pca->lock);
++
++      return ret;
++}
++
++static int32_t __reg_read(struct pca9632_data *pca, u_int8_t reg)
++{
++      int32_t ret;
++
++      ret = i2c_smbus_read_byte_data(&pca->client, reg);
++
++      return ret;
++}
++
++static u_int8_t reg_read(struct pca9632_data *pca, u_int8_t reg)
++{
++      int32_t ret;
++
++      mutex_lock(&pca->lock);
++      ret = __reg_read(pca, reg);
++      mutex_unlock(&pca->lock);
++
++      return ret & 0xff;
++}
++
++static int reg_set_bit_mask(struct pca9632_data *pca,
++                          u_int8_t reg, u_int8_t mask, u_int8_t val)
++{
++      int ret;
++      u_int8_t tmp;
++
++      val &= mask;
++
++      mutex_lock(&pca->lock);
++
++      tmp = __reg_read(pca, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      ret = __reg_write(pca, reg, tmp);
++
++      mutex_unlock(&pca->lock);
++
++      return ret;
++}
++
++static inline int calc_dc(uint8_t idc)
++{
++      return (idc * 100) / 256;
++}
++
++/*
++ * Software reset
++ */
++static int software_rst(struct i2c_adapter *adapter)
++{
++      u8 buf[] = { 0xa5, 0x5a };
++
++      struct i2c_msg msg[] = {
++              {
++                      .addr = 0x3,
++                      .flags = 0,
++                      .buf = &buf,
++                      .len = sizeof(buf)
++              }
++      };
++
++      return i2c_transfer(adapter, msg, 1);
++}
++
++/*
++ * Group dmblnk control
++ */
++static void config_group_dmblnk(struct pca9632_data *pca, int group_dmblnk_mode)
++{
++      reg_set_bit_mask(pca, PCA9632_REG_MODE2, 0x20,
++                      group_dmblnk_mode << PCA9632_DMBLNK_SHIFT);
++}
++
++static int get_group_dmblnk(struct pca9632_data *pca)
++{
++      return reg_read(pca, PCA9632_REG_MODE2) >> PCA9632_DMBLNK_SHIFT;
++}
++
++static ssize_t show_group_dmblnk(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++
++      if (get_group_dmblnk(pca))
++              return sprintf(buf, "blinking\n");
++      else
++              return sprintf(buf, "dimming\n");
++}
++
++static ssize_t set_group_dmblnk(struct device *dev, struct device_attribute
++                                      *attr, const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++      unsigned int mode = simple_strtoul(buf, NULL, 10);
++
++      if (mode)
++              dev_info(&pca->client.dev, "blinking\n");
++      else
++              dev_info(&pca->client.dev, "dimming\n");
++
++      config_group_dmblnk(pca, mode);
++
++      return count;
++}
++
++static DEVICE_ATTR(group_dmblnk, S_IRUGO | S_IWUSR, show_group_dmblnk,
++                                                      set_group_dmblnk);
++
++static int reg_id_by_name(const char *name)
++{
++      int reg_id = -1;
++
++      if (!strncmp(name, "led0", 4))
++              reg_id = PCA9632_REG_PWM0;
++      else if (!strncmp(name, "led1", 4))
++              reg_id = PCA9632_REG_PWM1;
++      else if (!strncmp(name, "led2", 4))
++              reg_id = PCA9632_REG_PWM2;
++      else if (!strncmp(name, "led3", 4))
++              reg_id = PCA9632_REG_PWM3;
++
++      return reg_id;
++}
++
++static int get_led_output(struct pca9632_data *pca, int ldrx)
++{
++      u_int8_t led_state;
++
++      ldrx = ldrx - 2;
++      led_state = reg_read(pca, PCA9632_REG_LEDOUT);
++      led_state = (led_state >> (2 * ldrx)) & 0x03;
++
++      return led_state;
++}
++
++static void config_led_output(struct pca9632_data *pca, int ldrx,
++                                      enum pca9632_led_output led_output)
++{
++      u_int8_t mask;
++      int tmp;
++
++      ldrx = ldrx - 2;
++      mask = 0x03 << (2 * ldrx);
++      tmp = reg_set_bit_mask(pca, PCA9632_REG_LEDOUT,
++                                      mask, led_output << (2 * ldrx));
++}
++
++/*
++ * Individual brightness control
++ */
++static ssize_t show_brightness(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++      int ldrx;
++
++      ldrx = reg_id_by_name(attr->attr.name);
++
++      switch (get_led_output(pca, ldrx)) {
++
++      case PCA9632_OFF:
++      case PCA9632_ON:
++              return sprintf(buf, "%s",
++                      led_output_name[get_led_output(pca, ldrx)]);
++
++      case PCA9632_CTRL_BY_PWM:
++              return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca, ldrx)));
++
++      case PCA9632_CTRL_BY_PWM_GRPPWM:
++              /* check group dmblnk */
++              if (get_group_dmblnk(pca))
++                      return sprintf(buf, "%d%% \n",
++                              calc_dc(reg_read(pca, ldrx)));
++              return sprintf(buf, "%d%% \n",
++                                       calc_dc((reg_read(pca, ldrx) & 0xfc)));
++      default:
++              break;
++      }
++
++      return sprintf(buf, "invalid argument\n");
++}
++
++static ssize_t set_brightness(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++      unsigned int pwm = simple_strtoul(buf, NULL, 10);
++      int ldrx;
++
++      ldrx = reg_id_by_name(attr->attr.name);
++      reg_set_bit_mask(pca, ldrx, 0xff, pwm);
++
++      return count;
++}
++
++static
++DEVICE_ATTR(led0_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness);
++static
++DEVICE_ATTR(led1_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness);
++static
++DEVICE_ATTR(led2_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness);
++static
++DEVICE_ATTR(led3_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness);
++
++/*
++ * Group frequency control
++ */
++static ssize_t show_group_freq(struct device *dev, struct device_attribute
++                              *attr, char *buf)
++{
++      uint32_t period;
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++
++      period = ((reg_read(pca, PCA9632_REG_GRPFREQ) + 1) * 1000) / 24;
++
++      return sprintf(buf, "%d ms\n", period);
++}
++
++static ssize_t set_group_freq(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++
++      unsigned int freq = simple_strtoul(buf, NULL, 10);
++      reg_write(pca, PCA9632_REG_GRPFREQ, freq);
++      return count;
++}
++
++static
++DEVICE_ATTR(group_freq, S_IRUGO | S_IWUSR, show_group_freq, set_group_freq);
++
++/*
++ * Group duty cycle tonrol*
++ */
++static ssize_t show_group_dc(struct device *dev, struct device_attribute *attr,
++                           char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++
++      if (get_group_dmblnk(pca)) {
++
++              if (reg_read(pca, PCA9632_REG_GRPFREQ) <= 0x03)
++                      return sprintf(buf, "%d%% \n",
++                           calc_dc(reg_read(pca, PCA9632_REG_GRPPWM) & 0xfc));
++
++              return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca,
++                                                        PCA9632_REG_GRPPWM)));
++      }
++
++      return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca,
++                                                 PCA9632_REG_GRPPWM) & 0xf0));
++}
++
++static ssize_t set_group_dc(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++
++      unsigned int dc = simple_strtoul(buf, NULL, 10);
++
++      reg_set_bit_mask(pca, PCA9632_REG_GRPPWM, 0xff, dc);
++
++      return count;
++}
++
++static DEVICE_ATTR(group_dc, S_IRUGO | S_IWUSR, show_group_dc, set_group_dc);
++
++/*
++ * LED driver output
++ */
++static ssize_t show_led_output(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++      int ldrx;
++
++      ldrx = reg_id_by_name(attr->attr.name);
++
++      return sprintf(buf, "%s \n",
++                                  led_output_name[get_led_output(pca, ldrx)]);
++
++}
++static ssize_t set_led_output(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pca9632_data *pca = i2c_get_clientdata(client);
++      enum pca9632_led_output led_output;
++      int ldrx;
++
++      led_output = simple_strtoul(buf, NULL, 10);
++      ldrx = reg_id_by_name(attr->attr.name);
++      config_led_output(pca, ldrx, led_output);
++
++      return count;
++}
++
++static
++DEVICE_ATTR(led0_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output);
++static
++DEVICE_ATTR(led1_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output);
++static
++DEVICE_ATTR(led2_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output);
++static
++DEVICE_ATTR(led3_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output);
++
++static struct attribute *pca_sysfs_entries[] = {
++      &dev_attr_group_dmblnk.attr,
++      &dev_attr_led0_pwm.attr,
++      &dev_attr_led1_pwm.attr,
++      &dev_attr_led2_pwm.attr,
++      &dev_attr_led3_pwm.attr,
++      &dev_attr_group_dc.attr,
++      &dev_attr_group_freq.attr,
++      &dev_attr_led0_output.attr,
++      &dev_attr_led1_output.attr,
++      &dev_attr_led2_output.attr,
++      &dev_attr_led3_output.attr,
++      NULL
++};
++
++static struct attribute_group pca_attr_group = {
++      .name   = NULL,                 /* put in device directory */
++      .attrs  = pca_sysfs_entries,
++};
++
++#ifdef CONFIG_PM
++static int pca9632_suspend(struct device *dev, pm_message_t state)
++{
++      /* FIXME: Not implemented */
++      return 0;
++}
++
++static int pca9632_resume(struct device *dev)
++{
++      /* FIXME: Not implemented */
++      return 0;
++}
++#else
++#define pca9632_suspend NULL
++#define pca9632_resume NULL
++#endif
++
++static struct i2c_driver pca9632_driver = {
++      .driver = {
++              .name    = "pca9632",
++              .suspend = pca9632_suspend,
++              .resume  = pca9632_resume,
++      },
++      .id             = I2C_DRIVERID_PCA9632,
++      .attach_adapter = pca9632_attach_adapter,
++      .detach_client  = pca9632_detach_client,
++};
++
++static int pca9632_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++      struct i2c_client *new_client;
++      struct pca9632_data *pca;
++      int err;
++
++      pca = kzalloc(sizeof(struct pca9632_data), GFP_KERNEL);
++      if (!pca)
++              return -ENOMEM;
++
++      mutex_init(&pca->lock);
++
++      new_client = &pca->client;
++      i2c_set_clientdata(new_client, pca);
++      new_client->addr = address;
++      new_client->adapter = adapter;
++      new_client->driver = &pca9632_driver;
++      new_client->flags = 0;
++
++      strlcpy(new_client->name, "pca9632", I2C_NAME_SIZE);
++
++      /* register with i2c core */
++      err = i2c_attach_client(new_client);
++      if (err)
++              goto exit_kfree;
++
++      err = sysfs_create_group(&new_client->dev.kobj, &pca_attr_group);
++      if (err)
++              goto exit_detach;
++
++      /* software reset */
++      if (!software_rst(adapter))
++              dev_info(&pca->client.dev, "pca9632 sw-rst done\n");
++
++      /* enter normal mode */
++      reg_set_bit_mask(pca, PCA9632_REG_MODE1, 0x10, PCA9632_NORMAL);
++
++      return 0;
++
++exit_detach:
++      i2c_detach_client(new_client);
++exit_kfree:
++      kfree(pca);
++
++      return err;
++}
++
++static int pca9632_attach_adapter(struct i2c_adapter *adapter)
++{
++      return i2c_probe(adapter, &addr_data, pca9632_detect);
++}
++
++static int pca9632_detach_client(struct i2c_client *client)
++{
++      int err;
++
++      sysfs_remove_group(&client->dev.kobj, &pca_attr_group);
++      err = i2c_detach_client(client);
++
++      if (err)
++              return err;
++
++      kfree(i2c_get_clientdata(client));
++
++      return 0;
++}
++
++static int __init pca9632_plat_probe(struct platform_device *pdev)
++{
++      /* FIXME: platform data should be attached here */
++      pca9632_pdev = pdev;
++
++      return 0;
++}
++
++static int pca9632_plat_remove(struct platform_device *pdev)
++{
++      return 0;
++}
++
++static struct platform_driver pca9632_plat_driver = {
++      .probe  = pca9632_plat_probe,
++      .remove = pca9632_plat_remove,
++      .driver = {
++              .owner  = THIS_MODULE,
++              .name   = "pca9632",
++      },
++};
++
++static int __init pca9632_init(void)
++{
++      int rc;
++
++      rc = platform_driver_register(&pca9632_plat_driver);
++      if (!rc)
++              i2c_add_driver(&pca9632_driver);
++
++      return rc;
++}
++
++static void __exit pca9632_exit(void)
++{
++      i2c_del_driver(&pca9632_driver);
++
++      platform_driver_unregister(&pca9632_plat_driver);
++}
++
++MODULE_AUTHOR("Matt Hsu <matt_hsu@openmoko.org>");
++MODULE_DESCRIPTION("NXP PCA9632 driver");
++MODULE_LICENSE("GPL");
++
++module_init(pca9632_init);
++module_exit(pca9632_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/pca9632.h linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pca9632.h
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/pca9632.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pca9632.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,24 @@
++#ifndef _PCA9632_H
++#define _PCA9632_H
++
++
++enum pca9632_regs{
++
++      PCA9632_REG_MODE1       = 0x00,
++      PCA9632_REG_MODE2       = 0x01,
++      PCA9632_REG_PWM0        = 0x02,
++      PCA9632_REG_PWM1        = 0x03,
++      PCA9632_REG_PWM2        = 0x04,
++      PCA9632_REG_PWM3        = 0x05,
++      PCA9632_REG_GRPPWM      = 0x06,
++      PCA9632_REG_GRPFREQ     = 0x07,
++      PCA9632_REG_LEDOUT      = 0x08,
++      PCA9632_REG_SUBADDR1    = 0x09,
++      PCA9632_REG_SUBADDR2    = 0x0a,
++      PCA9632_REG_SUBADDR3    = 0x0b,
++      PCA9632_REG_ALLCALLADR1 = 0x0c,
++};
++
++#define PCA9632_DMBLNK_SHIFT  5
++
++#endif /* _PCA9632_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50606.c linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50606.c
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50606.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50606.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,2193 @@
++/* Philips/NXP PCF50606 Power Management Unit (PMU) driver
++ *
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Authors: Harald Welte <laforge@openmoko.org>,
++ *        Matt Hsu <matt@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * This driver is a monster ;) It provides the following features
++ * - voltage control for a dozen different voltage domains
++ * - charging control for main and backup battery
++ * - rtc / alarm
++ * - watchdog
++ * - adc driver (hw_sensors like)
++ * - pwm driver
++ * - backlight
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/watchdog.h>
++#include <linux/miscdevice.h>
++#include <linux/input.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++#include <linux/sched.h>
++#include <linux/platform_device.h>
++#include <linux/pcf50606.h>
++#include <linux/apm-emulation.h>
++
++#include <asm/mach-types.h>
++#include <mach/gta01.h>
++
++#include "pcf50606.h"
++
++/* we use dev_dbg() throughout the code, but sometimes don't want to
++ * write an entire line of debug related information.  This DEBUGPC
++ * macro is a continuation for dev_dbg() */
++#ifdef DEBUG
++#define DEBUGPC(x, args ...) printk(x, ## args)
++#else
++#define DEBUGPC(x, args ...)
++#endif
++
++/***********************************************************************
++ * Static data / structures
++ ***********************************************************************/
++
++static unsigned short normal_i2c[] = { 0x08, I2C_CLIENT_END };
++
++I2C_CLIENT_INSMOD_1(pcf50606);
++
++#define PCF50606_B_CHG_FAST   0       /* Charger Fast allowed */
++#define PCF50606_B_CHG_PRESENT        1       /* Charger present */
++#define PCF50606_B_CHG_FOK    2       /* Fast OK for battery */
++#define PCF50606_B_CHG_ERR    3       /* Charger Error */
++#define PCF50606_B_CHG_PROT   4       /* Charger Protection */
++#define PCF50606_B_CHG_READY  5       /* Charging completed */
++
++#define PCF50606_F_CHG_FAST   (1<<PCF50606_B_CHG_FAST)
++#define PCF50606_F_CHG_PRESENT        (1<<PCF50606_B_CHG_PRESENT)
++#define PCF50606_F_CHG_FOK    (1<<PCF50606_B_CHG_FOK)
++#define PCF50606_F_CHG_ERR    (1<<PCF50606_B_CHG_ERR)
++#define PCF50606_F_CHG_PROT   (1<<PCF50606_B_CHG_PROT)
++#define PCF50606_F_CHG_READY  (1<<PCF50606_B_CHG_READY)
++#define PCF50606_F_CHG_MASK   0x000000fc
++
++#define PCF50606_F_PWR_PRESSED        0x00000100
++#define PCF50606_F_RTC_SECOND 0x00000200
++
++enum close_state {
++      CLOSE_STATE_NOT,
++      CLOSE_STATE_ALLOW = 0x2342,
++};
++
++enum pcf50606_suspend_states {
++      PCF50606_SS_RUNNING,
++      PCF50606_SS_STARTING_SUSPEND,
++      PCF50606_SS_COMPLETED_SUSPEND,
++      PCF50606_SS_RESUMING_BUT_NOT_US_YET,
++      PCF50606_SS_STARTING_RESUME,
++      PCF50606_SS_COMPLETED_RESUME,
++};
++
++struct pcf50606_data {
++      struct i2c_client client;
++      struct pcf50606_platform_data *pdata;
++      struct backlight_device *backlight;
++      struct mutex lock;
++      unsigned int flags;
++      unsigned int working;
++      struct mutex working_lock;
++      struct work_struct work;
++      struct rtc_device *rtc;
++      struct input_dev *input_dev;
++      int allow_close;
++      int onkey_seconds;
++      int irq;
++      int coldplug_done;
++      int suppress_onkey_events;
++      enum pcf50606_suspend_states suspend_state;
++#ifdef CONFIG_PM
++      struct {
++              u_int8_t dcdc1, dcdc2;
++              u_int8_t dcdec1;
++              u_int8_t dcudc1;
++              u_int8_t ioregc;
++              u_int8_t d1regc1;
++              u_int8_t d2regc1;
++              u_int8_t d3regc1;
++              u_int8_t lpregc1;
++              u_int8_t adcc1, adcc2;
++              u_int8_t pwmc1;
++              u_int8_t int1m, int2m, int3m;
++      } standby_regs;
++#endif
++};
++
++static struct i2c_driver pcf50606_driver;
++
++/* This is an ugly construct on how to access the (currently single/global)
++ * pcf50606 handle from other code in the kernel.  I didn't really come up with
++ * a more decent method of dynamically resolving this */
++struct pcf50606_data *pcf50606_global;
++EXPORT_SYMBOL_GPL(pcf50606_global);
++
++static struct platform_device *pcf50606_pdev;
++
++/* This is a 10k, B=3370 NTC Thermistor -10..79 centigrade */
++/* Table entries are offset by +0.5C so a properly rounded value is generated */
++static const u_int16_t ntc_table_10k_3370B[] = {
++      /* -10 */
++      43888, 41819, 39862, 38010, 36257, 34596, 33024, 31534, 30121, 28781,
++      27510, 26304, 25159, 24071, 23038, 22056, 21122, 20234, 19390, 18586,
++      17821, 17093, 16399, 15738, 15107, 14506, 13933, 13387, 12865, 12367,
++      11891, 11437, 11003, 10588, 10192, 9813, 9450, 9103, 8771, 8453,
++      8149, 7857, 7578, 7310, 7054, 6808, 6572, 6346, 6129, 5920,
++      5720, 5528, 5344, 5167, 4996, 4833, 4675, 4524, 4379, 4239,
++      4104, 3975, 3850, 3730, 3614, 3503, 3396, 3292, 3193, 3097,
++      3004, 2915, 2829, 2745, 2665, 2588, 2513, 2441, 2371, 2304,
++      2239, 2176, 2116, 2057, 2000, 1945, 1892, 1841, 1791, 1743,
++};
++
++
++/***********************************************************************
++ * Low-Level routines
++ ***********************************************************************/
++
++static inline int __reg_write(struct pcf50606_data *pcf, u_int8_t reg,
++                            u_int8_t val)
++{
++      if (pcf->suspend_state == PCF50606_SS_COMPLETED_SUSPEND) {
++              dev_err(&pcf->client.dev, "__reg_write while suspended.\n");
++              dump_stack();
++      }
++      return i2c_smbus_write_byte_data(&pcf->client, reg, val);
++}
++
++static int reg_write(struct pcf50606_data *pcf, u_int8_t reg, u_int8_t val)
++{
++      int ret;
++
++      mutex_lock(&pcf->lock);
++      ret = __reg_write(pcf, reg, val);
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++
++static inline int32_t __reg_read(struct pcf50606_data *pcf, u_int8_t reg)
++{
++      int32_t ret;
++
++      if (pcf->suspend_state == PCF50606_SS_COMPLETED_SUSPEND) {
++              dev_err(&pcf->client.dev, "__reg_read while suspended.\n");
++              dump_stack();
++      }
++      ret = i2c_smbus_read_byte_data(&pcf->client, reg);
++
++      return ret;
++}
++
++static u_int8_t reg_read(struct pcf50606_data *pcf, u_int8_t reg)
++{
++      int32_t ret;
++
++      mutex_lock(&pcf->lock);
++      ret = __reg_read(pcf, reg);
++      mutex_unlock(&pcf->lock);
++
++      return ret & 0xff;
++}
++
++static int reg_set_bit_mask(struct pcf50606_data *pcf,
++                          u_int8_t reg, u_int8_t mask, u_int8_t val)
++{
++      int ret;
++      u_int8_t tmp;
++
++      val &= mask;
++
++      mutex_lock(&pcf->lock);
++
++      tmp = __reg_read(pcf, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      ret = __reg_write(pcf, reg, tmp);
++
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++
++static int reg_clear_bits(struct pcf50606_data *pcf, u_int8_t reg, u_int8_t val)
++{
++      int ret;
++      u_int8_t tmp;
++
++      mutex_lock(&pcf->lock);
++
++      tmp = __reg_read(pcf, reg);
++      tmp &= ~val;
++      ret = __reg_write(pcf, reg, tmp);
++
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++
++/* synchronously read one ADC channel (busy-wait for result to be complete) */
++static u_int16_t adc_read(struct pcf50606_data *pcf,  int channel,
++                        u_int16_t *data2)
++{
++      u_int8_t adcs2, adcs1;
++      u_int16_t ret;
++
++      dev_dbg(&pcf->client.dev, "entering (pcf=%p, channel=%u, data2=%p)\n",
++              pcf, channel, data2);
++
++      channel &= PCF50606_ADCC2_ADCMUX_MASK;
++
++      mutex_lock(&pcf->lock);
++
++      /* start ADC conversion of selected channel */
++      __reg_write(pcf, PCF50606_REG_ADCC2, channel |
++                  PCF50606_ADCC2_ADCSTART | PCF50606_ADCC2_RES_10BIT);
++
++      do {
++              adcs2 = __reg_read(pcf, PCF50606_REG_ADCS2);
++      } while (!(adcs2 & PCF50606_ADCS2_ADCRDY));
++
++      adcs1 = __reg_read(pcf, PCF50606_REG_ADCS1);
++      ret = (adcs1 << 2) | (adcs2 & 0x03);
++
++      if (data2) {
++              adcs1 = __reg_read(pcf, PCF50606_REG_ADCS3);
++              *data2 = (adcs1 << 2) | ((adcs2 & 0x0c) >> 2);
++      }
++
++      mutex_unlock(&pcf->lock);
++
++      dev_dbg(&pcf->client.dev, "returning %u %u\n", ret,
++              data2 ? *data2 : 0);
++
++      return ret;
++}
++
++/***********************************************************************
++ * Voltage / ADC
++ ***********************************************************************/
++
++static u_int8_t dcudc_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      if (millivolts > 5500)
++              return 0x1f;
++      if (millivolts <= 3300) {
++              millivolts -= 900;
++              return millivolts/300;
++      }
++      if (millivolts < 4000)
++              return 0x0f;
++      else {
++              millivolts -= 4000;
++              return millivolts/100;
++      }
++}
++
++static unsigned int dcudc_2voltage(u_int8_t bits)
++{
++      bits &= 0x1f;
++      if (bits < 0x08)
++              return 900 + bits * 300;
++      else if (bits < 0x10)
++              return 3300;
++      else
++              return 4000 + bits * 100;
++}
++
++static u_int8_t dcdec_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3300)
++              return 0x0f;
++
++      millivolts -= 900;
++      return millivolts/300;
++}
++
++static unsigned int dcdec_2voltage(u_int8_t bits)
++{
++      bits &= 0x0f;
++      return 900 + bits*300;
++}
++
++static u_int8_t dcdc_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3600)
++              return 0x1f;
++
++      if (millivolts < 1500) {
++              millivolts -= 900;
++              return millivolts/25;
++      } else {
++              millivolts -= 1500;
++              return 0x18 + millivolts/300;
++      }
++}
++
++static unsigned int dcdc_2voltage(u_int8_t bits)
++{
++      bits &= 0x1f;
++      if ((bits & 0x18) == 0x18)
++              return 1500 + ((bits & 0x7) * 300);
++      else
++              return 900 + (bits * 25);
++}
++
++static u_int8_t dx_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3300)
++              return 0x18;
++
++      millivolts -= 900;
++      return millivolts/100;
++}
++
++static unsigned int dx_2voltage(u_int8_t bits)
++{
++      bits &= 0x1f;
++      return 900 + (bits * 100);
++}
++
++static const u_int8_t regulator_registers[__NUM_PCF50606_REGULATORS] = {
++      [PCF50606_REGULATOR_DCD]        = PCF50606_REG_DCDC1,
++      [PCF50606_REGULATOR_DCDE]       = PCF50606_REG_DCDEC1,
++      [PCF50606_REGULATOR_DCUD]       = PCF50606_REG_DCUDC1,
++      [PCF50606_REGULATOR_D1REG]      = PCF50606_REG_D1REGC1,
++      [PCF50606_REGULATOR_D2REG]      = PCF50606_REG_D2REGC1,
++      [PCF50606_REGULATOR_D3REG]      = PCF50606_REG_D3REGC1,
++      [PCF50606_REGULATOR_LPREG]      = PCF50606_REG_LPREGC1,
++      [PCF50606_REGULATOR_IOREG]      = PCF50606_REG_IOREGC,
++};
++
++int pcf50606_onoff_set(struct pcf50606_data *pcf,
++                     enum pcf50606_regulator_id reg, int on)
++{
++      u_int8_t addr;
++
++      if (reg >= __NUM_PCF50606_REGULATORS)
++              return -EINVAL;
++
++      /* IOREG cannot be powered off since it powers the PMU I2C */
++      if (reg == PCF50606_REGULATOR_IOREG)
++              return -EIO;
++
++      addr = regulator_registers[reg];
++
++      if (on == 0)
++              reg_set_bit_mask(pcf, addr, 0xe0, 0x00);
++      else
++              reg_set_bit_mask(pcf, addr, 0xe0, 0xe0);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_onoff_set);
++
++int pcf50606_onoff_get(struct pcf50606_data *pcf,
++                     enum pcf50606_regulator_id reg)
++{
++      u_int8_t val, addr;
++
++      if (reg >= __NUM_PCF50606_REGULATORS)
++              return -EINVAL;
++
++      addr = regulator_registers[reg];
++      val = (reg_read(pcf, addr) & 0xe0) >> 5;
++
++      /* PWREN1 = 1, PWREN2 = 1, see table 16 of datasheet */
++      switch (val) {
++      case 0:
++      case 5:
++              return 0;
++      default:
++              return 1;
++      }
++}
++EXPORT_SYMBOL_GPL(pcf50606_onoff_get);
++
++int pcf50606_voltage_set(struct pcf50606_data *pcf,
++                       enum pcf50606_regulator_id reg,
++                       unsigned int millivolts)
++{
++      u_int8_t volt_bits;
++      u_int8_t regnr;
++      int rc;
++
++      dev_dbg(&pcf->client.dev, "pcf=%p, reg=%d, mvolts=%d\n", pcf, reg,
++              millivolts);
++
++      if (reg >= __NUM_PCF50606_REGULATORS)
++              return -EINVAL;
++
++      if (millivolts > pcf->pdata->rails[reg].voltage.max)
++              return -EINVAL;
++
++      switch (reg) {
++      case PCF50606_REGULATOR_DCD:
++              volt_bits = dcdc_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, PCF50606_REG_DCDC1, 0x1f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCDE:
++              volt_bits = dcdec_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, PCF50606_REG_DCDEC1, 0x0f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCUD:
++              volt_bits = dcudc_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, PCF50606_REG_DCUDC1, 0x1f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_D1REG:
++      case PCF50606_REGULATOR_D2REG:
++      case PCF50606_REGULATOR_D3REG:
++              regnr = PCF50606_REG_D1REGC1 + (reg - PCF50606_REGULATOR_D1REG);
++              volt_bits = dx_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, regnr, 0x1f, volt_bits);
++              break;
++      case PCF50606_REGULATOR_LPREG:
++              volt_bits = dx_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, PCF50606_REG_LPREGC1, 0x1f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_IOREG:
++              if (millivolts < 1800)
++                      return -EINVAL;
++              volt_bits = dx_voltage(millivolts);
++              rc = reg_set_bit_mask(pcf, PCF50606_REG_IOREGC, 0x1f,
++                                    volt_bits);
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return rc;
++}
++EXPORT_SYMBOL_GPL(pcf50606_voltage_set);
++
++unsigned int pcf50606_voltage_get(struct pcf50606_data *pcf,
++                       enum pcf50606_regulator_id reg)
++{
++      u_int8_t volt_bits;
++      u_int8_t regnr;
++      unsigned int rc = 0;
++
++      if (reg >= __NUM_PCF50606_REGULATORS)
++              return -EINVAL;
++
++      switch (reg) {
++      case PCF50606_REGULATOR_DCD:
++              volt_bits = reg_read(pcf, PCF50606_REG_DCDC1) & 0x1f;
++              rc = dcdc_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCDE:
++              volt_bits = reg_read(pcf, PCF50606_REG_DCDEC1) & 0x0f;
++              rc = dcdec_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCUD:
++              volt_bits = reg_read(pcf, PCF50606_REG_DCUDC1) & 0x1f;
++              rc = dcudc_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_D1REG:
++      case PCF50606_REGULATOR_D2REG:
++      case PCF50606_REGULATOR_D3REG:
++              regnr = PCF50606_REG_D1REGC1 + (reg - PCF50606_REGULATOR_D1REG);
++              volt_bits = reg_read(pcf, regnr) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_LPREG:
++              volt_bits = reg_read(pcf, PCF50606_REG_LPREGC1) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_IOREG:
++              volt_bits = reg_read(pcf, PCF50606_REG_IOREGC) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return rc;
++}
++EXPORT_SYMBOL_GPL(pcf50606_voltage_get);
++
++/* go into 'STANDBY' mode, i.e. power off the main CPU and peripherals */
++void pcf50606_go_standby(void)
++{
++      reg_write(pcf50606_global, PCF50606_REG_OOCC1,
++                PCF50606_OOCC1_GOSTDBY);
++}
++EXPORT_SYMBOL_GPL(pcf50606_go_standby);
++
++void pcf50606_gpo0_set(struct pcf50606_data *pcf, int on)
++{
++      u_int8_t val;
++
++      if (on)
++              val = 0x07;
++      else
++              val = 0x0f;
++
++      reg_set_bit_mask(pcf, PCF50606_REG_GPOC1, 0x0f, val);
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo0_set);
++
++int pcf50606_gpo0_get(struct pcf50606_data *pcf)
++{
++      u_int8_t reg = reg_read(pcf, PCF50606_REG_GPOC1) & 0x0f;
++
++      if (reg == 0x07 || reg == 0x08)
++              return 1;
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo0_get);
++
++static void pcf50606_work(struct work_struct *work)
++{
++      struct pcf50606_data *pcf =
++                      container_of(work, struct pcf50606_data, work);
++      u_int8_t pcfirq[3];
++      int ret;
++
++      mutex_lock(&pcf->working_lock);
++      pcf->working = 1;
++
++      /* sanity */
++      if (!&pcf->client.dev)
++              goto bail;
++
++      /*
++       * if we are presently suspending, we are not in a position to deal
++       * with pcf50606 interrupts at all.
++       *
++       * Because we didn't clear the int pending registers, there will be
++       * no edge / interrupt waiting for us when we wake.  But it is OK
++       * because at the end of our resume, we call this workqueue function
++       * gratuitously, clearing the pending register and re-enabling
++       * servicing this interrupt.
++       */
++
++      if ((pcf->suspend_state == PCF50606_SS_STARTING_SUSPEND) ||
++          (pcf->suspend_state == PCF50606_SS_COMPLETED_SUSPEND))
++              goto bail;
++
++      /*
++       * If we are inside suspend -> resume completion time we don't attempt
++       * service until we have fully resumed.  Although we could talk to the
++       * device as soon as I2C is up, the regs in the device which we might
++       * choose to modify as part of the service action have not been
++       * reloaded with their pre-suspend states yet.  Therefore we will
++       * defer our service if we are called like that until our resume has
++       * completed.
++       *
++       * This shouldn't happen any more because we disable servicing this
++       * interrupt in suspend and don't re-enable it until resume is
++       * completed.
++       */
++
++      if (pcf->suspend_state &&
++              (pcf->suspend_state != PCF50606_SS_COMPLETED_RESUME))
++              goto reschedule;
++
++      /* this is the case early in resume! Sanity check! */
++      if (i2c_get_clientdata(&pcf->client) == NULL)
++              goto reschedule;
++
++      /*
++       * p35 pcf50606 datasheet rev 2.2:
++       * ''The system controller shall read all interrupt registers in
++       *   one I2C read action''
++       * because if you don't INT# gets stuck asserted forever after a
++       * while
++       */
++      ret = i2c_smbus_read_i2c_block_data(&pcf->client, PCF50606_REG_INT1,
++                                          sizeof(pcfirq), pcfirq);
++      if (ret != sizeof(pcfirq)) {
++              DEBUGPC("Oh crap PMU IRQ register read failed %d\n", ret);
++              /*
++               * it shouldn't fail, we no longer attempt to use
++               * I2C while it can be suspended.  But we don't have
++               * much option but to retry if if it ever did fail,
++               * because if we don't service the interrupt to clear
++               * it, we will never see another PMU interrupt edge.
++               */
++              goto reschedule;
++      }
++
++      /* hey did we just resume? (because we don't get here unless we are
++       * running normally or the first call after resumption)
++       *
++       * pcf50606 resume is really really over now then.
++       */
++      if (pcf->suspend_state != PCF50606_SS_RUNNING) {
++              pcf->suspend_state = PCF50606_SS_RUNNING;
++
++              /* peek at the IRQ reason, if power button then set a flag
++               * so that we do not signal the event to userspace
++               */
++              if (pcfirq[0] & (PCF50606_INT1_ONKEYF | PCF50606_INT1_ONKEYR)) {
++                      pcf->suppress_onkey_events = 1;
++                      dev_dbg(&pcf->client.dev,
++                              "Wake by ONKEY, suppressing ONKEY events");
++              } else {
++                      pcf->suppress_onkey_events = 0;
++              }
++      }
++
++      if (!pcf->coldplug_done) {
++              DEBUGPC("PMU Coldplug init\n");
++
++              /* we used SECOND to kick ourselves started -- turn it off */
++              pcfirq[0] &= ~PCF50606_INT1_SECOND;
++              reg_set_bit_mask(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND,
++                               PCF50606_INT1_SECOND);
++
++              /* coldplug the USB if present */
++              if (__reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) {
++                      /* Charger inserted */
++                      DEBUGPC("COLD CHGINS ");
++                      input_report_key(pcf->input_dev, KEY_BATTERY, 1);
++                      apm_queue_event(APM_POWER_STATUS_CHANGE);
++                      pcf->flags |= PCF50606_F_CHG_PRESENT;
++                      if (pcf->pdata->cb)
++                              pcf->pdata->cb(&pcf->client.dev,
++                                              PCF50606_FEAT_MBC,
++                                              PMU_EVT_INSERT);
++              }
++
++              pcf->coldplug_done = 1;
++      }
++
++
++      dev_dbg(&pcf->client.dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x:",
++              pcfirq[0], pcfirq[1], pcfirq[2]);
++
++      if (pcfirq[0] & PCF50606_INT1_ONKEYF) {
++              /* ONKEY falling edge (start of button press) */
++              pcf->flags |= PCF50606_F_PWR_PRESSED;
++              if (!pcf->suppress_onkey_events) {
++                      DEBUGPC("ONKEYF ");
++                      input_report_key(pcf->input_dev, KEY_POWER, 1);
++              } else {
++                      DEBUGPC("ONKEYF(unreported) ");
++              }
++      }
++      if (pcfirq[0] & PCF50606_INT1_ONKEY1S) {
++              /* ONKEY pressed for more than 1 second */
++              pcf->onkey_seconds = 0;
++              DEBUGPC("ONKEY1S ");
++              /* Tell PMU we are taking care of this */
++              reg_set_bit_mask(pcf, PCF50606_REG_OOCC1,
++                               PCF50606_OOCC1_TOTRST,
++                               PCF50606_OOCC1_TOTRST);
++              /* enable SECOND interrupt (hz tick) */
++              reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND);
++      }
++      if (pcfirq[0] & PCF50606_INT1_ONKEYR) {
++              /* ONKEY rising edge (end of button press) */
++              pcf->flags &= ~PCF50606_F_PWR_PRESSED;
++              pcf->onkey_seconds = -1;
++              if (!pcf->suppress_onkey_events) {
++                      DEBUGPC("ONKEYR ");
++                      input_report_key(pcf->input_dev, KEY_POWER, 0);
++              } else {
++                      DEBUGPC("ONKEYR(suppressed) ");
++                      /* don't suppress any more power button events */
++                      pcf->suppress_onkey_events = 0;
++              }
++              /* disable SECOND interrupt in case RTC didn't
++               * request it */
++              if (!(pcf->flags & PCF50606_F_RTC_SECOND))
++                      reg_set_bit_mask(pcf, PCF50606_REG_INT1M,
++                                       PCF50606_INT1_SECOND,
++                                       PCF50606_INT1_SECOND);
++      }
++      if (pcfirq[0] & PCF50606_INT1_EXTONR) {
++              DEBUGPC("EXTONR ");
++              input_report_key(pcf->input_dev, KEY_POWER2, 1);
++      }
++      if (pcfirq[0] & PCF50606_INT1_EXTONF) {
++              DEBUGPC("EXTONF ");
++              input_report_key(pcf->input_dev, KEY_POWER2, 0);
++      }
++      if (pcfirq[0] & PCF50606_INT1_SECOND) {
++              DEBUGPC("SECOND ");
++              if (pcf->flags & PCF50606_F_RTC_SECOND)
++                      rtc_update_irq(pcf->rtc, 1,
++                                     RTC_PF | RTC_IRQF);
++
++              if (pcf->onkey_seconds >= 0 &&
++                  pcf->flags & PCF50606_F_PWR_PRESSED) {
++                      DEBUGPC("ONKEY_SECONDS(%u, OOCC1=0x%02x) ",
++                              pcf->onkey_seconds,
++                              reg_read(pcf, PCF50606_REG_OOCC1));
++                      pcf->onkey_seconds++;
++                      if (pcf->onkey_seconds >=
++                          pcf->pdata->onkey_seconds_required) {
++                              /* Ask init to do 'ctrlaltdel' */
++                              /*
++                               * currently Linux reacts badly to issuing a
++                               * signal to PID #1 before init is started.
++                               * What happens is that the next kernel thread
++                               * to start, which is the JFFS2 Garbage
++                               * collector in our case, gets the signal
++                               * instead and proceeds to fail to fork --
++                               * which is very bad.  Therefore we confirm
++                               * PID #1 exists before issuing the signal
++                               */
++                              if (find_task_by_pid_ns(1, &init_pid_ns)) {
++                                      kill_pid(task_pid(find_task_by_pid_ns(1, 
++                                                      &init_pid_ns)), SIGINT, 1);
++                                      DEBUGPC("SIGINT(init) ");
++                              }
++                              /* FIXME: what to do if userspace doesn't
++                               * shut down? Do we want to force it? */
++                      }
++              }
++      }
++      if (pcfirq[0] & PCF50606_INT1_ALARM) {
++              DEBUGPC("ALARM ");
++              if (pcf->pdata->used_features & PCF50606_FEAT_RTC)
++                      rtc_update_irq(pcf->rtc, 1,
++                                     RTC_AF | RTC_IRQF);
++      }
++
++      if (pcfirq[1] & PCF50606_INT2_CHGINS) {
++              /* Charger inserted */
++              DEBUGPC("CHGINS ");
++              input_report_key(pcf->input_dev, KEY_BATTERY, 1);
++              apm_queue_event(APM_POWER_STATUS_CHANGE);
++              pcf->flags |= PCF50606_F_CHG_PRESENT;
++              if (pcf->pdata->cb)
++                      pcf->pdata->cb(&pcf->client.dev,
++                                     PCF50606_FEAT_MBC, PMU_EVT_INSERT);
++              /* FIXME: how to signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGRM) {
++              /* Charger removed */
++              DEBUGPC("CHGRM ");
++              input_report_key(pcf->input_dev, KEY_BATTERY, 0);
++              apm_queue_event(APM_POWER_STATUS_CHANGE);
++              pcf->flags &= ~(PCF50606_F_CHG_MASK|PCF50606_F_CHG_PRESENT);
++              if (pcf->pdata->cb)
++                      pcf->pdata->cb(&pcf->client.dev,
++                                     PCF50606_FEAT_MBC, PMU_EVT_INSERT);
++              /* FIXME: how signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGFOK) {
++              /* Battery ready for fast charging */
++              DEBUGPC("CHGFOK ");
++              pcf->flags |= PCF50606_F_CHG_FOK;
++              /* FIXME: how to signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGERR) {
++              /* Error in charge mode */
++              DEBUGPC("CHGERR ");
++              pcf->flags |= PCF50606_F_CHG_ERR;
++              pcf->flags &= ~(PCF50606_F_CHG_FOK|PCF50606_F_CHG_READY);
++              /* FIXME: how to signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGFRDY) {
++              /* Fast charge completed */
++              DEBUGPC("CHGFRDY ");
++              pcf->flags |= PCF50606_F_CHG_READY;
++              pcf->flags &= ~PCF50606_F_CHG_FOK;
++              /* FIXME: how to signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGPROT) {
++              /* Charging protection interrupt */
++              DEBUGPC("CHGPROT ");
++              pcf->flags &= ~(PCF50606_F_CHG_FOK|PCF50606_F_CHG_READY);
++              /* FIXME: signal this to userspace */
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGWD10S) {
++              /* Charger watchdog will expire in 10 seconds */
++              DEBUGPC("CHGWD10S ");
++              reg_set_bit_mask(pcf, PCF50606_REG_OOCC1,
++                               PCF50606_OOCC1_WDTRST,
++                               PCF50606_OOCC1_WDTRST);
++      }
++      if (pcfirq[1] & PCF50606_INT2_CHGWDEXP) {
++              /* Charger watchdog expires */
++              DEBUGPC("CHGWDEXP ");
++              /* FIXME: how to signal this to userspace */
++      }
++
++      if (pcfirq[2] & PCF50606_INT3_ADCRDY) {
++              /* ADC result ready */
++              DEBUGPC("ADCRDY ");
++      }
++      if (pcfirq[2] & PCF50606_INT3_ACDINS) {
++              /* Accessory insertion detected */
++              DEBUGPC("ACDINS ");
++              if (pcf->pdata->cb)
++                      pcf->pdata->cb(&pcf->client.dev,
++                                     PCF50606_FEAT_ACD, PMU_EVT_INSERT);
++      }
++      if (pcfirq[2] & PCF50606_INT3_ACDREM) {
++              /* Accessory removal detected */
++              DEBUGPC("ACDREM ");
++              if (pcf->pdata->cb)
++                      pcf->pdata->cb(&pcf->client.dev,
++                                     PCF50606_FEAT_ACD, PMU_EVT_REMOVE);
++      }
++      /* FIXME: TSCPRES */
++      if (pcfirq[2] & PCF50606_INT3_LOWBAT) {
++              if (__reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) {
++                      /*
++                       * hey no need to freak out, we have some kind of
++                       * valid charger power
++                       */
++                      DEBUGPC("(NO)BAT ");
++              } else {
++                      /* Really low battery voltage, we have 8 seconds left */
++                      DEBUGPC("LOWBAT ");
++                      /*
++                       * currently Linux reacts badly to issuing a signal to
++                       * PID #1 before init is started.  What happens is that
++                       * the next kernel thread to start, which is the JFFS2
++                       * Garbage collector in our case, gets the signal
++                       * instead and proceeds to fail to fork -- which is
++                       * very bad.  Therefore we confirm PID #1 exists
++                       * before issuing SPIGPWR
++                       */
++                      if (find_task_by_pid_ns(1, &init_pid_ns)) {
++                              apm_queue_event(APM_LOW_BATTERY);
++                              DEBUGPC("SIGPWR(init) ");
++                              kill_pid(task_pid(find_task_by_pid_ns(1, &init_pid_ns)), SIGPWR, 1);
++                      } else
++                              /*
++                               * well, our situation is like this:  we do not
++                               * have any external power, we have a low
++                               * battery and since PID #1 doesn't exist yet,
++                               * we are early in the boot, likely before
++                               * rootfs mount.  We should just call it a day
++                               */
++                              apm_queue_event(APM_CRITICAL_SUSPEND);
++              }
++              /* Tell PMU we are taking care of this */
++              reg_set_bit_mask(pcf, PCF50606_REG_OOCC1,
++                               PCF50606_OOCC1_TOTRST,
++                               PCF50606_OOCC1_TOTRST);
++      }
++      if (pcfirq[2] & PCF50606_INT3_HIGHTMP) {
++              /* High temperature */
++              DEBUGPC("HIGHTMP ");
++              apm_queue_event(APM_CRITICAL_SUSPEND);
++      }
++
++      DEBUGPC("\n");
++
++bail:
++      pcf->working = 0;
++      input_sync(pcf->input_dev);
++      put_device(&pcf->client.dev);
++      mutex_unlock(&pcf->working_lock);
++
++      return;
++
++reschedule:
++
++      if ((pcf->suspend_state != PCF50606_SS_STARTING_SUSPEND) &&
++          (pcf->suspend_state != PCF50606_SS_COMPLETED_SUSPEND)) {
++              msleep(10);
++              dev_info(&pcf->client.dev, "rescheduling interrupt service\n");
++      }
++      if (!schedule_work(&pcf->work))
++              dev_err(&pcf->client.dev, "int service reschedule failed\n");
++
++      /* we don't put the device here, hold it for next time */
++      mutex_unlock(&pcf->working_lock);
++}
++
++static irqreturn_t pcf50606_irq(int irq, void *_pcf)
++{
++      struct pcf50606_data *pcf = _pcf;
++
++      dev_dbg(&pcf->client.dev, "entering(irq=%u, pcf=%p): scheduling work\n",
++              irq, _pcf);
++      get_device(&pcf->client.dev);
++      if (!schedule_work(&pcf->work) && !pcf->working)
++              dev_err(&pcf->client.dev, "pcf irq work already queued.\n");
++
++      return IRQ_HANDLED;
++}
++
++static u_int16_t adc_to_batt_millivolts(u_int16_t adc)
++{
++      u_int16_t mvolts;
++
++      mvolts = (adc * 6000) / 1024;
++
++      return mvolts;
++}
++
++#define BATTVOLT_SCALE_START 2800
++#define BATTVOLT_SCALE_END 4200
++#define BATTVOLT_SCALE_DIVIDER ((BATTVOLT_SCALE_END - BATTVOLT_SCALE_START)/100)
++
++static u_int8_t battvolt_scale(u_int16_t battvolt)
++{
++      /* FIXME: this linear scale is completely bogus */
++      u_int16_t battvolt_relative = battvolt - BATTVOLT_SCALE_START;
++      unsigned int percent = battvolt_relative / BATTVOLT_SCALE_DIVIDER;
++
++      return percent;
++}
++
++u_int16_t pcf50606_battvolt(struct pcf50606_data *pcf)
++{
++      u_int16_t adc;
++      adc = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_RES, NULL);
++
++      return adc_to_batt_millivolts(adc);
++}
++EXPORT_SYMBOL_GPL(pcf50606_battvolt);
++
++static ssize_t show_battvolt(struct device *dev, struct device_attribute *attr,
++                           char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++
++      return sprintf(buf, "%u\n", pcf50606_battvolt(pcf));
++}
++static DEVICE_ATTR(battvolt, S_IRUGO | S_IWUSR, show_battvolt, NULL);
++
++static int reg_id_by_name(const char *name)
++{
++      int reg_id;
++
++      if (!strcmp(name, "voltage_dcd"))
++              reg_id = PCF50606_REGULATOR_DCD;
++      else if (!strcmp(name, "voltage_dcde"))
++              reg_id = PCF50606_REGULATOR_DCDE;
++      else if (!strcmp(name, "voltage_dcud"))
++              reg_id = PCF50606_REGULATOR_DCUD;
++      else if (!strcmp(name, "voltage_d1reg"))
++              reg_id = PCF50606_REGULATOR_D1REG;
++      else if (!strcmp(name, "voltage_d2reg"))
++              reg_id = PCF50606_REGULATOR_D2REG;
++      else if (!strcmp(name, "voltage_d3reg"))
++              reg_id = PCF50606_REGULATOR_D3REG;
++      else if (!strcmp(name, "voltage_lpreg"))
++              reg_id = PCF50606_REGULATOR_LPREG;
++      else if (!strcmp(name, "voltage_ioreg"))
++              reg_id = PCF50606_REGULATOR_IOREG;
++      else
++              reg_id = -1;
++
++      return reg_id;
++}
++
++static ssize_t show_vreg(struct device *dev, struct device_attribute *attr,
++                       char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      unsigned int reg_id;
++
++      reg_id = reg_id_by_name(attr->attr.name);
++      if (reg_id < 0)
++              return 0;
++
++      if (pcf50606_onoff_get(pcf, reg_id) > 0)
++              return sprintf(buf, "%u\n", pcf50606_voltage_get(pcf, reg_id));
++      else
++              return strlcpy(buf, "0\n", PAGE_SIZE);
++}
++
++static ssize_t set_vreg(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      unsigned long mvolts = simple_strtoul(buf, NULL, 10);
++      unsigned int reg_id;
++
++      reg_id = reg_id_by_name(attr->attr.name);
++      if (reg_id < 0)
++              return -EIO;
++
++      dev_dbg(dev, "attempting to set %s(%d) to %lu mvolts\n",
++              attr->attr.name, reg_id, mvolts);
++
++      if (mvolts == 0) {
++              pcf50606_onoff_set(pcf, reg_id, 0);
++      } else {
++              if (pcf50606_voltage_set(pcf, reg_id, mvolts) < 0) {
++                      dev_warn(dev, "refusing to set %s(%d) to %lu mvolts "
++                               "(max=%u)\n", attr->attr.name, reg_id, mvolts,
++                               pcf->pdata->rails[reg_id].voltage.max);
++                      return -EINVAL;
++              }
++              pcf50606_onoff_set(pcf, reg_id, 1);
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(voltage_dcd, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_dcde, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_dcud, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_d1reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_d2reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_d3reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_lpreg, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++static DEVICE_ATTR(voltage_ioreg, S_IRUGO | S_IWUSR, show_vreg, set_vreg);
++
++/***********************************************************************
++ * Charger Control
++ ***********************************************************************/
++
++/* Enable/disable fast charging (500mA in the GTA01) */
++void pcf50606_charge_fast(struct pcf50606_data *pcf, int on)
++{
++      if (!(pcf->pdata->used_features & PCF50606_FEAT_MBC))
++              return;
++
++      if (on) {
++              /* We can allow PCF to automatically charge
++               * using Ifast */
++              pcf->flags |= PCF50606_F_CHG_FAST;
++              reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++                               PCF50606_MBCC1_AUTOFST,
++                               PCF50606_MBCC1_AUTOFST);
++      } else {
++              pcf->flags &= ~PCF50606_F_CHG_FAST;
++              /* disable automatic fast-charge */
++              reg_clear_bits(pcf, PCF50606_REG_MBCC1,
++                              PCF50606_MBCC1_AUTOFST);
++              /* switch to idle mode to abort existing charge
++               * process */
++              reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++                               PCF50606_MBCC1_CHGMOD_MASK,
++                               PCF50606_MBCC1_CHGMOD_IDLE);
++      }
++}
++EXPORT_SYMBOL_GPL(pcf50606_charge_fast);
++
++static inline u_int16_t adc_to_rntc(struct pcf50606_data *pcf, u_int16_t adc)
++{
++      u_int32_t r_ntc = (adc * (u_int32_t)pcf->pdata->r_fix_batt)
++              / (1023 - adc);
++
++      return r_ntc;
++}
++
++static inline int16_t rntc_to_temp(u_int16_t rntc)
++{
++      int i;
++
++      for (i = 0; i < ARRAY_SIZE(ntc_table_10k_3370B); i++) {
++              if (rntc > ntc_table_10k_3370B[i])
++                      return i - 10;  /* First element is -10 */
++      }
++      return -99;     /* Below our range */
++}
++
++static ssize_t show_battemp(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int16_t adc;
++
++      adc = adc_read(pcf, PCF50606_ADCMUX_BATTEMP, NULL);
++
++      return sprintf(buf, "%d\n", rntc_to_temp(adc_to_rntc(pcf, adc)));
++}
++static DEVICE_ATTR(battemp, S_IRUGO | S_IWUSR, show_battemp, NULL);
++
++static inline int16_t adc_to_chg_milliamps(struct pcf50606_data *pcf,
++                                           u_int16_t adc_adcin1,
++                                           u_int16_t adc_batvolt)
++{
++      int32_t res = (adc_adcin1 - adc_batvolt) * 2400;
++      return (res * 1000) / (pcf->pdata->r_sense_milli * 1024);
++}
++
++static ssize_t show_chgcur(struct device *dev, struct device_attribute *attr,
++                         char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int16_t adc_batvolt, adc_adcin1;
++      int16_t ma;
++
++      adc_batvolt = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_ADCIN1,
++                             &adc_adcin1);
++      ma = adc_to_chg_milliamps(pcf, adc_adcin1, adc_batvolt);
++
++      return sprintf(buf, "%d\n", ma);
++}
++static DEVICE_ATTR(chgcur, S_IRUGO | S_IWUSR, show_chgcur, NULL);
++
++static const char *chgmode_names[] = {
++      [PCF50606_MBCC1_CHGMOD_QUAL]            = "qualification",
++      [PCF50606_MBCC1_CHGMOD_PRE]             = "pre",
++      [PCF50606_MBCC1_CHGMOD_TRICKLE]         = "trickle",
++      [PCF50606_MBCC1_CHGMOD_FAST_CCCV]       = "fast_cccv",
++      [PCF50606_MBCC1_CHGMOD_FAST_NOCC]       = "fast_nocc",
++      [PCF50606_MBCC1_CHGMOD_FAST_NOCV]       = "fast_nocv",
++      [PCF50606_MBCC1_CHGMOD_FAST_SW]         = "fast_switch",
++      [PCF50606_MBCC1_CHGMOD_IDLE]            = "idle",
++};
++
++static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1);
++      u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK);
++
++      return sprintf(buf, "%s\n", chgmode_names[chgmod]);
++}
++
++static ssize_t set_chgmode(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1);
++
++      mbcc1 &= ~PCF50606_MBCC1_CHGMOD_MASK;
++
++      if (!strcmp(buf, "qualification"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_QUAL;
++      else if (!strcmp(buf, "pre"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_PRE;
++      else if (!strcmp(buf, "trickle"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_TRICKLE;
++      else if (!strcmp(buf, "fast_cccv"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_FAST_CCCV;
++      /* We don't allow the other fast modes for security reasons */
++      else if (!strcmp(buf, "idle"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_IDLE;
++      else
++              return -EINVAL;
++
++      reg_write(pcf, PCF50606_REG_MBCC1, mbcc1);
++
++      return count;
++}
++
++static DEVICE_ATTR(chgmode, S_IRUGO | S_IWUSR, show_chgmode, set_chgmode);
++
++static const char *chgstate_names[] = {
++      [PCF50606_B_CHG_FAST]                   = "fast_enabled",
++      [PCF50606_B_CHG_PRESENT]                = "present",
++      [PCF50606_B_CHG_FOK]                    = "fast_ok",
++      [PCF50606_B_CHG_ERR]                    = "error",
++      [PCF50606_B_CHG_PROT]                   = "protection",
++      [PCF50606_B_CHG_READY]                  = "ready",
++};
++
++static ssize_t show_chgstate(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      char *b = buf;
++      int i;
++
++      for (i = 0; i < 32; i++)
++              if (pcf->flags & (1 << i) && i < ARRAY_SIZE(chgstate_names))
++                      b += sprintf(b, "%s ", chgstate_names[i]);
++
++      if (b > buf)
++              b += sprintf(b, "\n");
++
++      return b - buf;
++}
++static DEVICE_ATTR(chgstate, S_IRUGO | S_IWUSR, show_chgstate, NULL);
++
++/***********************************************************************
++ * APM emulation
++ ***********************************************************************/
++
++static void pcf50606_get_power_status(struct apm_power_info *info)
++{
++      struct pcf50606_data *pcf = pcf50606_global;
++      u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1);
++      u_int8_t chgmod = mbcc1 & PCF50606_MBCC1_CHGMOD_MASK;
++      u_int16_t battvolt = pcf50606_battvolt(pcf);
++
++      if (reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON)
++              info->ac_line_status = APM_AC_ONLINE;
++      else
++              info->ac_line_status = APM_AC_OFFLINE;
++
++      switch (chgmod) {
++      case PCF50606_MBCC1_CHGMOD_QUAL:
++      case PCF50606_MBCC1_CHGMOD_PRE:
++      case PCF50606_MBCC1_CHGMOD_IDLE:
++              info->battery_life = battvolt_scale(battvolt);
++              break;
++      default:
++              info->battery_status = APM_BATTERY_STATUS_CHARGING;
++              info->battery_flag = APM_BATTERY_FLAG_CHARGING;
++              break;
++      }
++}
++
++/***********************************************************************
++ * RTC
++ ***********************************************************************/
++
++struct pcf50606_time {
++      u_int8_t sec;
++      u_int8_t min;
++      u_int8_t hour;
++      u_int8_t wkday;
++      u_int8_t day;
++      u_int8_t month;
++      u_int8_t year;
++};
++
++static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50606_time *pcf)
++{
++      rtc->tm_sec = bcd2bin(pcf->sec);
++      rtc->tm_min = bcd2bin(pcf->min);
++      rtc->tm_hour = bcd2bin(pcf->hour);
++      rtc->tm_wday = bcd2bin(pcf->wkday);
++      rtc->tm_mday = bcd2bin(pcf->day);
++      rtc->tm_mon = bcd2bin(pcf->month);
++      rtc->tm_year = bcd2bin(pcf->year) + 100;
++}
++
++static void rtc2pcf_time(struct pcf50606_time *pcf, struct rtc_time *rtc)
++{
++      pcf->sec = bin2bcd(rtc->tm_sec);
++      pcf->min = bin2bcd(rtc->tm_min);
++      pcf->hour = bin2bcd(rtc->tm_hour);
++      pcf->wkday = bin2bcd(rtc->tm_wday);
++      pcf->day = bin2bcd(rtc->tm_mday);
++      pcf->month = bin2bcd(rtc->tm_mon);
++      pcf->year = bin2bcd(rtc->tm_year - 100);
++}
++
++static int pcf50606_rtc_ioctl(struct device *dev, unsigned int cmd,
++                            unsigned long arg)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++
++      switch (cmd) {
++      case RTC_AIE_OFF:
++              /* disable the alarm interrupt */
++              reg_set_bit_mask(pcf, PCF50606_REG_INT1M,
++                               PCF50606_INT1_ALARM, PCF50606_INT1_ALARM);
++              return 0;
++      case RTC_AIE_ON:
++              /* enable the alarm interrupt */
++              reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_ALARM);
++              return 0;
++      case RTC_PIE_OFF:
++              /* disable periodic interrupt (hz tick) */
++              pcf->flags &= ~PCF50606_F_RTC_SECOND;
++              reg_set_bit_mask(pcf, PCF50606_REG_INT1M,
++                               PCF50606_INT1_SECOND, PCF50606_INT1_SECOND);
++              return 0;
++      case RTC_PIE_ON:
++              /* ensable periodic interrupt (hz tick) */
++              pcf->flags |= PCF50606_F_RTC_SECOND;
++              reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND);
++              return 0;
++      }
++      return -ENOIOCTLCMD;
++}
++
++static int pcf50606_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      struct pcf50606_time pcf_tm;
++
++      mutex_lock(&pcf->lock);
++      pcf_tm.sec = __reg_read(pcf, PCF50606_REG_RTCSC);
++      pcf_tm.min = __reg_read(pcf, PCF50606_REG_RTCMN);
++      pcf_tm.hour = __reg_read(pcf, PCF50606_REG_RTCHR);
++      pcf_tm.wkday = __reg_read(pcf, PCF50606_REG_RTCWD);
++      pcf_tm.day = __reg_read(pcf, PCF50606_REG_RTCDT);
++      pcf_tm.month = __reg_read(pcf, PCF50606_REG_RTCMT);
++      pcf_tm.year = __reg_read(pcf, PCF50606_REG_RTCYR);
++      mutex_unlock(&pcf->lock);
++
++      dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++              pcf_tm.day, pcf_tm.month, pcf_tm.year,
++              pcf_tm.hour, pcf_tm.min, pcf_tm.sec);
++
++      pcf2rtc_time(tm, &pcf_tm);
++
++      dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++              tm->tm_mday, tm->tm_mon, tm->tm_year,
++              tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++      return 0;
++}
++
++static int pcf50606_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      struct pcf50606_time pcf_tm;
++      u_int8_t int1m;
++
++      dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++              tm->tm_mday, tm->tm_mon, tm->tm_year,
++              tm->tm_hour, tm->tm_min, tm->tm_sec);
++      rtc2pcf_time(&pcf_tm, tm);
++      dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++              pcf_tm.day, pcf_tm.month, pcf_tm.year,
++              pcf_tm.hour, pcf_tm.min, pcf_tm.sec);
++
++      mutex_lock(&pcf->lock);
++
++      /* disable SECOND interrupt */
++      int1m = __reg_read(pcf, PCF50606_REG_INT1M);
++      __reg_write(pcf, PCF50606_REG_INT1M, int1m | PCF50606_INT1_SECOND);
++
++      __reg_write(pcf, PCF50606_REG_RTCSC, pcf_tm.sec);
++      __reg_write(pcf, PCF50606_REG_RTCMN, pcf_tm.min);
++      __reg_write(pcf, PCF50606_REG_RTCHR, pcf_tm.hour);
++      __reg_write(pcf, PCF50606_REG_RTCWD, pcf_tm.wkday);
++      __reg_write(pcf, PCF50606_REG_RTCDT, pcf_tm.day);
++      __reg_write(pcf, PCF50606_REG_RTCMT, pcf_tm.month);
++      __reg_write(pcf, PCF50606_REG_RTCYR, pcf_tm.year);
++
++      /* restore INT1M, potentially re-enable SECOND interrupt */
++      __reg_write(pcf, PCF50606_REG_INT1M, int1m);
++
++      mutex_unlock(&pcf->lock);
++
++      return 0;
++}
++
++static int pcf50606_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      struct pcf50606_time pcf_tm;
++
++      mutex_lock(&pcf->lock);
++      alrm->enabled =
++              __reg_read(pcf, PCF50606_REG_INT1M) & PCF50606_INT1_ALARM
++              ? 0 : 1;
++      pcf_tm.sec = __reg_read(pcf, PCF50606_REG_RTCSCA);
++      pcf_tm.min = __reg_read(pcf, PCF50606_REG_RTCMNA);
++      pcf_tm.hour = __reg_read(pcf, PCF50606_REG_RTCHRA);
++      pcf_tm.wkday = __reg_read(pcf, PCF50606_REG_RTCWDA);
++      pcf_tm.day = __reg_read(pcf, PCF50606_REG_RTCDTA);
++      pcf_tm.month = __reg_read(pcf, PCF50606_REG_RTCMTA);
++      pcf_tm.year = __reg_read(pcf, PCF50606_REG_RTCYRA);
++      mutex_unlock(&pcf->lock);
++
++      pcf2rtc_time(&alrm->time, &pcf_tm);
++
++      return 0;
++}
++
++static int pcf50606_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      struct pcf50606_time pcf_tm;
++      u_int8_t irqmask;
++
++      rtc2pcf_time(&pcf_tm, &alrm->time);
++
++      mutex_lock(&pcf->lock);
++
++      /* disable alarm interrupt */
++      irqmask = __reg_read(pcf, PCF50606_REG_INT1M);
++      irqmask |= PCF50606_INT1_ALARM;
++      __reg_write(pcf, PCF50606_REG_INT1M, irqmask);
++
++      __reg_write(pcf, PCF50606_REG_RTCSCA, pcf_tm.sec);
++      __reg_write(pcf, PCF50606_REG_RTCMNA, pcf_tm.min);
++      __reg_write(pcf, PCF50606_REG_RTCHRA, pcf_tm.hour);
++      __reg_write(pcf, PCF50606_REG_RTCWDA, pcf_tm.wkday);
++      __reg_write(pcf, PCF50606_REG_RTCDTA, pcf_tm.day);
++      __reg_write(pcf, PCF50606_REG_RTCMTA, pcf_tm.month);
++      __reg_write(pcf, PCF50606_REG_RTCYRA, pcf_tm.year);
++
++      if (alrm->enabled) {
++              /* (re-)enaable alarm interrupt */
++              irqmask = __reg_read(pcf, PCF50606_REG_INT1M);
++              irqmask &= ~PCF50606_INT1_ALARM;
++              __reg_write(pcf, PCF50606_REG_INT1M, irqmask);
++      }
++
++      mutex_unlock(&pcf->lock);
++
++      /* FIXME */
++      return 0;
++}
++
++static struct rtc_class_ops pcf50606_rtc_ops = {
++      .ioctl          = pcf50606_rtc_ioctl,
++      .read_time      = pcf50606_rtc_read_time,
++      .set_time       = pcf50606_rtc_set_time,
++      .read_alarm     = pcf50606_rtc_read_alarm,
++      .set_alarm      = pcf50606_rtc_set_alarm,
++};
++
++/***********************************************************************
++ * Watchdog
++ ***********************************************************************/
++
++static void pcf50606_wdt_start(struct pcf50606_data *pcf)
++{
++      reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, PCF50606_OOCC1_WDTRST,
++                       PCF50606_OOCC1_WDTRST);
++}
++
++static void pcf50606_wdt_stop(struct pcf50606_data *pcf)
++{
++      reg_clear_bits(pcf, PCF50606_REG_OOCS, PCF50606_OOCS_WDTEXP);
++}
++
++static void pcf50606_wdt_keepalive(struct pcf50606_data *pcf)
++{
++      pcf50606_wdt_start(pcf);
++}
++
++static int pcf50606_wdt_open(struct inode *inode, struct file *file)
++{
++      struct pcf50606_data *pcf = pcf50606_global;
++
++      file->private_data = pcf;
++
++      /* start the timer */
++      pcf50606_wdt_start(pcf);
++
++      return nonseekable_open(inode, file);
++}
++
++static int pcf50606_wdt_release(struct inode *inode, struct file *file)
++{
++      struct pcf50606_data *pcf = file->private_data;
++
++      if (pcf->allow_close == CLOSE_STATE_ALLOW)
++              pcf50606_wdt_stop(pcf);
++      else {
++              printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n");
++              pcf50606_wdt_keepalive(pcf);
++      }
++
++      pcf->allow_close = CLOSE_STATE_NOT;
++
++      return 0;
++}
++
++static ssize_t pcf50606_wdt_write(struct file *file, const char __user *data,
++                                size_t len, loff_t *ppos)
++{
++      struct pcf50606_data *pcf = file->private_data;
++      if (len) {
++              size_t i;
++
++              for (i = 0; i != len; i++) {
++                      char c;
++                      if (get_user(c, data + i))
++                              return -EFAULT;
++                      if (c == 'V')
++                              pcf->allow_close = CLOSE_STATE_ALLOW;
++              }
++              pcf50606_wdt_keepalive(pcf);
++      }
++
++      return len;
++}
++
++static struct watchdog_info pcf50606_wdt_ident = {
++      .options        = WDIOF_MAGICCLOSE,
++      .firmware_version = 0,
++      .identity       = "PCF50606 Watchdog",
++};
++
++static int pcf50606_wdt_ioctl(struct inode *inode, struct file *file,
++                            unsigned int cmd, unsigned long arg)
++{
++      struct pcf50606_data *pcf = file->private_data;
++      void __user *argp = (void __user *)arg;
++      int __user *p = argp;
++
++      switch (cmd) {
++      case WDIOC_GETSUPPORT:
++              return copy_to_user(argp, &pcf50606_wdt_ident,
++                                  sizeof(pcf50606_wdt_ident)) ? -EFAULT : 0;
++              break;
++      case WDIOC_GETSTATUS:
++      case WDIOC_GETBOOTSTATUS:
++              return put_user(0, p);
++      case WDIOC_KEEPALIVE:
++              pcf50606_wdt_keepalive(pcf);
++              return 0;
++      case WDIOC_GETTIMEOUT:
++              return put_user(8, p);
++      default:
++              return -ENOIOCTLCMD;
++      }
++}
++
++static struct file_operations pcf50606_wdt_fops = {
++      .owner          = THIS_MODULE,
++      .llseek         = no_llseek,
++      .write          = &pcf50606_wdt_write,
++      .ioctl          = &pcf50606_wdt_ioctl,
++      .open           = &pcf50606_wdt_open,
++      .release        = &pcf50606_wdt_release,
++};
++
++static struct miscdevice pcf50606_wdt_miscdev = {
++      .minor          = WATCHDOG_MINOR,
++      .name           = "watchdog",
++      .fops           = &pcf50606_wdt_fops,
++};
++
++/***********************************************************************
++ * PWM
++ ***********************************************************************/
++
++static const char *pwm_dc_table[] = {
++      "0/16", "1/16", "2/16", "3/16",
++      "4/16", "5/16", "6/16", "7/16",
++      "8/16", "9/16", "10/16", "11/16",
++      "12/16", "13/16", "14/16", "15/16",
++};
++
++static ssize_t show_pwm_dc(struct device *dev, struct device_attribute *attr,
++                         char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t val;
++
++      val = reg_read(pcf, PCF50606_REG_PWMC1) >> PCF50606_PWMC1_DC_SHIFT;
++      val &= 0xf;
++
++      return sprintf(buf, "%s\n", pwm_dc_table[val]);
++}
++
++static ssize_t set_pwm_dc(struct device *dev, struct device_attribute *attr,
++                        const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t i;
++
++      for (i = 0; i < ARRAY_SIZE(pwm_dc_table); i++) {
++              if (!strncmp(buf, pwm_dc_table[i], strlen(pwm_dc_table[i]))) {
++                      dev_dbg(dev, "setting pwm dc %s\n\r", pwm_dc_table[i]);
++                      reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0x1e,
++                                       (i << PCF50606_PWMC1_DC_SHIFT));
++              }
++      }
++      return count;
++}
++
++static DEVICE_ATTR(pwm_dc, S_IRUGO | S_IWUSR, show_pwm_dc, set_pwm_dc);
++
++static const char *pwm_clk_table[] = {
++      "512", "256", "128", "64",
++      "56300", "28100", "14100", "7000",
++};
++
++static ssize_t show_pwm_clk(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t val;
++
++      val = reg_read(pcf, PCF50606_REG_PWMC1) >> PCF50606_PWMC1_CLK_SHIFT;
++      val &= 0x7;
++
++      return sprintf(buf, "%s\n", pwm_clk_table[val]);
++}
++
++static ssize_t set_pwm_clk(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      u_int8_t i;
++
++      for (i = 0; i < ARRAY_SIZE(pwm_clk_table); i++) {
++              if (!strncmp(buf, pwm_clk_table[i], strlen(pwm_clk_table[i]))) {
++                      dev_dbg(dev, "setting pwm clk %s\n\r",
++                              pwm_clk_table[i]);
++                      reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0xe0,
++                                       (i << PCF50606_PWMC1_CLK_SHIFT));
++              }
++      }
++      return count;
++}
++
++static DEVICE_ATTR(pwm_clk, S_IRUGO | S_IWUSR, show_pwm_clk, set_pwm_clk);
++
++static int pcf50606bl_get_intensity(struct backlight_device *bd)
++{
++      struct pcf50606_data *pcf = bl_get_data(bd);
++      int intensity = reg_read(pcf, PCF50606_REG_PWMC1);
++      intensity = (intensity >> PCF50606_PWMC1_DC_SHIFT);
++
++      return intensity & 0xf;
++}
++
++static int pcf50606bl_set_intensity(struct backlight_device *bd)
++{
++      struct pcf50606_data *pcf = bl_get_data(bd);
++      int intensity = bd->props.brightness;
++
++      if (bd->props.power != FB_BLANK_UNBLANK)
++              intensity = 0;
++      if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++              intensity = 0;
++
++      return reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0x1e,
++                              (intensity << PCF50606_PWMC1_DC_SHIFT));
++}
++
++static struct backlight_ops pcf50606bl_ops = {
++      .get_brightness = pcf50606bl_get_intensity,
++      .update_status  = pcf50606bl_set_intensity,
++};
++
++/***********************************************************************
++ * Driver initialization
++ ***********************************************************************/
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++/* We currently place those platform devices here to make sure the device
++ * suspend/resume order is correct */
++static struct platform_device gta01_pm_gps_dev = {
++      .name           = "neo1973-pm-gps",
++};
++
++static struct platform_device gta01_pm_bt_dev = {
++      .name           = "neo1973-pm-bt",
++};
++#endif
++
++static struct attribute *pcf_sysfs_entries[16] = {
++      &dev_attr_voltage_dcd.attr,
++      &dev_attr_voltage_dcde.attr,
++      &dev_attr_voltage_dcud.attr,
++      &dev_attr_voltage_d1reg.attr,
++      &dev_attr_voltage_d2reg.attr,
++      &dev_attr_voltage_d3reg.attr,
++      &dev_attr_voltage_lpreg.attr,
++      &dev_attr_voltage_ioreg.attr,
++      NULL
++};
++
++static struct attribute_group pcf_attr_group = {
++      .name   = NULL,                 /* put in device directory */
++      .attrs  = pcf_sysfs_entries,
++};
++
++static void populate_sysfs_group(struct pcf50606_data *pcf)
++{
++      int i = 0;
++      struct attribute **attr;
++
++      for (attr = pcf_sysfs_entries; *attr; attr++)
++              i++;
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_MBC) {
++              pcf_sysfs_entries[i++] = &dev_attr_chgstate.attr;
++              pcf_sysfs_entries[i++] = &dev_attr_chgmode.attr;
++      }
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_CHGCUR)
++              pcf_sysfs_entries[i++] = &dev_attr_chgcur.attr;
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_BATVOLT)
++              pcf_sysfs_entries[i++] = &dev_attr_battvolt.attr;
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_BATTEMP)
++              pcf_sysfs_entries[i++] = &dev_attr_battemp.attr;
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_PWM) {
++              pcf_sysfs_entries[i++] = &dev_attr_pwm_dc.attr;
++              pcf_sysfs_entries[i++] = &dev_attr_pwm_clk.attr;
++      }
++}
++
++static int pcf50606_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++      struct i2c_client *new_client;
++      struct pcf50606_data *data;
++      int err = 0;
++      int irq;
++
++      if (!pcf50606_pdev) {
++              printk(KERN_ERR "pcf50606: driver needs a platform_device!\n");
++              return -EIO;
++      }
++
++      irq = platform_get_irq(pcf50606_pdev, 0);
++      if (irq < 0) {
++              dev_err(&pcf50606_pdev->dev, "no irq in platform resources!\n");
++              return -EIO;
++      }
++
++      /* At the moment, we only support one PCF50606 in a system */
++      if (pcf50606_global) {
++              dev_err(&pcf50606_pdev->dev,
++                      "currently only one chip supported\n");
++              return -EBUSY;
++      }
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (!data)
++              return -ENOMEM;
++
++      mutex_init(&data->lock);
++      mutex_init(&data->working_lock);
++      INIT_WORK(&data->work, pcf50606_work);
++      data->irq = irq;
++      data->working = 0;
++      data->suppress_onkey_events = 0;
++      data->onkey_seconds = -1;
++      data->pdata = pcf50606_pdev->dev.platform_data;
++
++      new_client = &data->client;
++      i2c_set_clientdata(new_client, data);
++      new_client->addr = address;
++      new_client->adapter = adapter;
++      new_client->driver = &pcf50606_driver;
++      new_client->flags = 0;
++      strlcpy(new_client->name, "pcf50606", I2C_NAME_SIZE);
++
++      /* now we try to detect the chip */
++
++      /* register with i2c core */
++      err = i2c_attach_client(new_client);
++      if (err) {
++              dev_err(&new_client->dev,
++                      "error during i2c_attach_client()\n");
++              goto exit_free;
++      }
++
++      populate_sysfs_group(data);
++
++      err = sysfs_create_group(&new_client->dev.kobj, &pcf_attr_group);
++      if (err) {
++              dev_err(&new_client->dev, "error creating sysfs group\n");
++              goto exit_detach;
++      }
++
++      /* create virtual charger 'device' */
++
++      /* input device registration */
++      data->input_dev = input_allocate_device();
++      if (!data->input_dev)
++              goto exit_sysfs;
++
++      data->input_dev->name = "FIC Neo1973 PMU events";
++      data->input_dev->phys = "I2C";
++      data->input_dev->id.bustype = BUS_I2C;
++
++      data->input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
++      set_bit(KEY_POWER, data->input_dev->keybit);
++      set_bit(KEY_POWER2, data->input_dev->keybit);
++      set_bit(KEY_BATTERY, data->input_dev->keybit);
++
++      err = input_register_device(data->input_dev);
++      if (err)
++              goto exit_sysfs;
++
++      /* register power off handler with core power management */
++      pm_power_off = &pcf50606_go_standby;
++
++      /* configure interrupt mask */
++      /* we don't mask SECOND here, because we want one to do coldplug with */
++      reg_write(data, PCF50606_REG_INT1M, 0x00);
++      reg_write(data, PCF50606_REG_INT2M, 0x00);
++      reg_write(data, PCF50606_REG_INT3M, PCF50606_INT3_TSCPRES);
++
++      err = request_irq(irq, pcf50606_irq, IRQF_TRIGGER_FALLING,
++                        "pcf50606", data);
++      if (err < 0)
++              goto exit_input;
++
++      if (enable_irq_wake(irq) < 0)
++              dev_err(&new_client->dev, "IRQ %u cannot be enabled as wake-up"
++                      "source in this hardware revision!", irq);
++
++      pcf50606_global = data;
++
++      if (data->pdata->used_features & PCF50606_FEAT_RTC) {
++              data->rtc = rtc_device_register("pcf50606", &new_client->dev,
++                                              &pcf50606_rtc_ops, THIS_MODULE);
++              if (IS_ERR(data->rtc)) {
++                      err = PTR_ERR(data->rtc);
++                      goto exit_irq;
++              }
++      }
++
++      if (data->pdata->used_features & PCF50606_FEAT_WDT) {
++              err = misc_register(&pcf50606_wdt_miscdev);
++              if (err) {
++                      dev_err(&new_client->dev, "cannot register miscdev on "
++                             "minor=%d (%d)\n", WATCHDOG_MINOR, err);
++                      goto exit_rtc;
++              }
++      }
++
++      if (data->pdata->used_features & PCF50606_FEAT_PWM) {
++              /* enable PWM controller */
++              reg_set_bit_mask(data, PCF50606_REG_PWMC1,
++                               PCF50606_PWMC1_ACTSET,
++                               PCF50606_PWMC1_ACTSET);
++      }
++
++      if (data->pdata->used_features & PCF50606_FEAT_PWM_BL) {
++              data->backlight = backlight_device_register("pcf50606-bl",
++                                                          &new_client->dev,
++                                                          data,
++                                                          &pcf50606bl_ops);
++              if (!data->backlight)
++                      goto exit_misc;
++              data->backlight->props.max_brightness = 16;
++              data->backlight->props.power = FB_BLANK_UNBLANK;
++              data->backlight->props.brightness =
++                                      data->pdata->init_brightness;
++              backlight_update_status(data->backlight);
++      }
++
++      apm_get_power_status = pcf50606_get_power_status;
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      if (machine_is_neo1973_gta01()) {
++              gta01_pm_gps_dev.dev.parent = &new_client->dev;
++              switch (system_rev) {
++              case GTA01Bv2_SYSTEM_REV:
++              case GTA01Bv3_SYSTEM_REV:
++              case GTA01Bv4_SYSTEM_REV:
++                      gta01_pm_bt_dev.dev.parent = &new_client->dev;
++                      platform_device_register(&gta01_pm_bt_dev);
++                      break;
++              }
++              platform_device_register(&gta01_pm_gps_dev);
++              /* a link for gllin compatibility */
++              err = bus_create_device_link(&platform_bus_type,
++                      &gta01_pm_gps_dev.dev.kobj, "gta01-pm-gps.0");
++              if (err)
++                      printk(KERN_ERR
++                          "sysfs_create_link (gta01-pm-gps.0): %d\n", err);
++      }
++#endif
++
++      if (data->pdata->used_features & PCF50606_FEAT_ACD)
++              reg_set_bit_mask(data, PCF50606_REG_ACDC1,
++                               PCF50606_ACDC1_ACDAPE, PCF50606_ACDC1_ACDAPE);
++      else
++              reg_clear_bits(data, PCF50606_REG_ACDC1,
++                             PCF50606_ACDC1_ACDAPE);
++
++      return 0;
++
++exit_misc:
++      if (data->pdata->used_features & PCF50606_FEAT_WDT)
++              misc_deregister(&pcf50606_wdt_miscdev);
++exit_rtc:
++      if (data->pdata->used_features & PCF50606_FEAT_RTC)
++              rtc_device_unregister(pcf50606_global->rtc);
++exit_irq:
++      free_irq(pcf50606_global->irq, pcf50606_global);
++      pcf50606_global = NULL;
++exit_input:
++      pm_power_off = NULL;
++      input_unregister_device(data->input_dev);
++exit_sysfs:
++      sysfs_remove_group(&new_client->dev.kobj, &pcf_attr_group);
++exit_detach:
++      i2c_detach_client(new_client);
++exit_free:
++      kfree(data);
++      return err;
++}
++
++static int pcf50606_attach_adapter(struct i2c_adapter *adapter)
++{
++      return i2c_probe(adapter, &addr_data, &pcf50606_detect);
++}
++
++static int pcf50606_detach_client(struct i2c_client *client)
++{
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++
++      apm_get_power_status = NULL;
++      input_unregister_device(pcf->input_dev);
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_PWM_BL)
++              backlight_device_unregister(pcf->backlight);
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_WDT)
++              misc_deregister(&pcf50606_wdt_miscdev);
++
++      if (pcf->pdata->used_features & PCF50606_FEAT_RTC)
++              rtc_device_unregister(pcf->rtc);
++
++      free_irq(pcf->irq, pcf);
++
++      sysfs_remove_group(&client->dev.kobj, &pcf_attr_group);
++
++      pm_power_off = NULL;
++
++      kfree(pcf);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++#define INT1M_RESUMERS        (PCF50606_INT1_ALARM | \
++                       PCF50606_INT1_ONKEYF | \
++                       PCF50606_INT1_EXTONR)
++#define INT2M_RESUMERS        (PCF50606_INT2_CHGWD10S | \
++                       PCF50606_INT2_CHGPROT | \
++                       PCF50606_INT2_CHGERR)
++#define INT3M_RESUMERS        (PCF50606_INT3_LOWBAT | \
++                       PCF50606_INT3_HIGHTMP | \
++                       PCF50606_INT3_ACDINS)
++static int pcf50606_suspend(struct device *dev, pm_message_t state)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++      int i;
++
++      /* we suspend once (!) as late as possible in the suspend sequencing */
++
++      if ((state.event != PM_EVENT_SUSPEND) ||
++          (pcf->suspend_state != PCF50606_SS_RUNNING))
++              return -EBUSY;
++
++      /* The general idea is to power down all unused power supplies,
++       * and then mask all PCF50606 interrup sources but EXTONR, ONKEYF
++       * and ALARM */
++
++      mutex_lock(&pcf->lock);
++
++      pcf->suspend_state = PCF50606_SS_STARTING_SUSPEND;
++
++      /* we are not going to service any further interrupts until we
++       * resume.  If the IRQ workqueue is still pending in the background,
++       * it will bail when it sees we set suspend state above.
++       */
++
++      disable_irq(pcf->irq);
++
++      /* Save all registers that don't "survive" standby state */
++      pcf->standby_regs.dcdc1 = __reg_read(pcf, PCF50606_REG_DCDC1);
++      pcf->standby_regs.dcdc2 = __reg_read(pcf, PCF50606_REG_DCDC2);
++      pcf->standby_regs.dcdec1 = __reg_read(pcf, PCF50606_REG_DCDEC1);
++      pcf->standby_regs.dcudc1 = __reg_read(pcf, PCF50606_REG_DCUDC1);
++      pcf->standby_regs.ioregc = __reg_read(pcf, PCF50606_REG_IOREGC);
++      pcf->standby_regs.d1regc1 = __reg_read(pcf, PCF50606_REG_D1REGC1);
++      pcf->standby_regs.d2regc1 = __reg_read(pcf, PCF50606_REG_D2REGC1);
++      pcf->standby_regs.d3regc1 = __reg_read(pcf, PCF50606_REG_D3REGC1);
++      pcf->standby_regs.lpregc1 = __reg_read(pcf, PCF50606_REG_LPREGC1);
++      pcf->standby_regs.adcc1 = __reg_read(pcf, PCF50606_REG_ADCC1);
++      pcf->standby_regs.adcc2 = __reg_read(pcf, PCF50606_REG_ADCC2);
++      pcf->standby_regs.pwmc1 = __reg_read(pcf, PCF50606_REG_PWMC1);
++
++      /* switch off power supplies that are not needed during suspend */
++      for (i = 0; i < __NUM_PCF50606_REGULATORS; i++) {
++              if (!(pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON)) {
++                      u_int8_t tmp;
++
++                      /* IOREG powers the I@C interface so we cannot switch
++                       * it off */
++                      if (i == PCF50606_REGULATOR_IOREG)
++                              continue;
++
++                      dev_dbg(dev, "disabling pcf50606 regulator %u\n", i);
++                      /* we cannot use pcf50606_onoff_set() because we're
++                       * already under the mutex */
++                      tmp = __reg_read(pcf, regulator_registers[i]);
++                      tmp &= 0x1f;
++                      __reg_write(pcf, regulator_registers[i], tmp);
++              }
++      }
++
++      pcf->standby_regs.int1m = __reg_read(pcf, PCF50606_REG_INT1M);
++      pcf->standby_regs.int2m = __reg_read(pcf, PCF50606_REG_INT2M);
++      pcf->standby_regs.int3m = __reg_read(pcf, PCF50606_REG_INT3M);
++      __reg_write(pcf, PCF50606_REG_INT1M, ~INT1M_RESUMERS & 0xff);
++      __reg_write(pcf, PCF50606_REG_INT2M, ~INT2M_RESUMERS & 0xff);
++      __reg_write(pcf, PCF50606_REG_INT3M, ~INT3M_RESUMERS & 0xff);
++
++      pcf->suspend_state = PCF50606_SS_COMPLETED_SUSPEND;
++
++      mutex_unlock(&pcf->lock);
++
++      return 0;
++}
++
++static int pcf50606_resume(struct device *dev)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcf50606_data *pcf = i2c_get_clientdata(client);
++
++      mutex_lock(&pcf->lock);
++
++      pcf->suspend_state = PCF50606_SS_STARTING_RESUME;
++
++      /* Resume all saved registers that don't "survive" standby state */
++      __reg_write(pcf, PCF50606_REG_INT1M, pcf->standby_regs.int1m);
++      __reg_write(pcf, PCF50606_REG_INT2M, pcf->standby_regs.int2m);
++      __reg_write(pcf, PCF50606_REG_INT3M, pcf->standby_regs.int3m);
++
++      __reg_write(pcf, PCF50606_REG_DCDC1, pcf->standby_regs.dcdc1);
++      __reg_write(pcf, PCF50606_REG_DCDC2, pcf->standby_regs.dcdc2);
++      __reg_write(pcf, PCF50606_REG_DCDEC1, pcf->standby_regs.dcdec1);
++      __reg_write(pcf, PCF50606_REG_DCUDC1, pcf->standby_regs.dcudc1);
++      __reg_write(pcf, PCF50606_REG_IOREGC, pcf->standby_regs.ioregc);
++      __reg_write(pcf, PCF50606_REG_D1REGC1, pcf->standby_regs.d1regc1);
++      __reg_write(pcf, PCF50606_REG_D2REGC1, pcf->standby_regs.d2regc1);
++      __reg_write(pcf, PCF50606_REG_D3REGC1, pcf->standby_regs.d3regc1);
++      __reg_write(pcf, PCF50606_REG_LPREGC1, pcf->standby_regs.lpregc1);
++      __reg_write(pcf, PCF50606_REG_ADCC1, pcf->standby_regs.adcc1);
++      __reg_write(pcf, PCF50606_REG_ADCC2, pcf->standby_regs.adcc2);
++      __reg_write(pcf, PCF50606_REG_PWMC1, pcf->standby_regs.pwmc1);
++
++      pcf->suspend_state = PCF50606_SS_COMPLETED_RESUME;
++
++      enable_irq(pcf->irq);
++
++      mutex_unlock(&pcf->lock);
++
++      /* Call PCF work function; this fixes an issue on the gta01 where
++       * the power button "goes away" if it is used to wake the device.
++       */
++      get_device(&pcf->client.dev);
++      pcf50606_work(&pcf->work);
++
++      return 0;
++}
++#else
++#define pcf50606_suspend NULL
++#define pcf50606_resume NULL
++#endif
++
++static struct i2c_driver pcf50606_driver = {
++      .driver = {
++              .name    = "pcf50606",
++              .suspend = pcf50606_suspend,
++              .resume  = pcf50606_resume,
++      },
++      .id             = I2C_DRIVERID_PCF50606,
++      .attach_adapter = pcf50606_attach_adapter,
++      .detach_client  = pcf50606_detach_client,
++};
++
++/* platform driver, since i2c devices don't have platform_data */
++static int __init pcf50606_plat_probe(struct platform_device *pdev)
++{
++      struct pcf50606_platform_data *pdata = pdev->dev.platform_data;
++
++      if (!pdata)
++              return -ENODEV;
++
++      pcf50606_pdev = pdev;
++
++      return 0;
++}
++
++static int pcf50606_plat_remove(struct platform_device *pdev)
++{
++      return 0;
++}
++
++/* We have this purely to capture an early indication that we are coming out
++ * of suspend, before our device resume got called; async interrupt service is
++ * interested in this.
++ */
++
++static int pcf50606_plat_resume(struct platform_device *pdev)
++{
++      /* i2c_get_clientdata(to_i2c_client(&pdev->dev)) returns NULL at this
++       * early resume time so we have to use pcf50606_global
++       */
++      pcf50606_global->suspend_state = PCF50606_SS_RESUMING_BUT_NOT_US_YET;
++
++      return 0;
++}
++
++static struct platform_driver pcf50606_plat_driver = {
++      .probe  = pcf50606_plat_probe,
++      .remove = pcf50606_plat_remove,
++      .resume_early = pcf50606_plat_resume,
++      .driver = {
++              .owner  = THIS_MODULE,
++              .name   = "pcf50606",
++      },
++};
++
++static int __init pcf50606_init(void)
++{
++      int rc;
++
++      rc = platform_driver_register(&pcf50606_plat_driver);
++      if (!rc)
++              rc = i2c_add_driver(&pcf50606_driver);
++
++      return rc;
++}
++
++static void pcf50606_exit(void)
++{
++      i2c_del_driver(&pcf50606_driver);
++      platform_driver_unregister(&pcf50606_plat_driver);
++}
++
++MODULE_DESCRIPTION("I2C chip driver for NXP PCF50606 power management unit");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(pcf50606_init);
++module_exit(pcf50606_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50606.h linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50606.h
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50606.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50606.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,302 @@
++#ifndef _PCF50606_H
++#define _PCF50606_H
++
++/* Philips PCF50606 Power Managemnt Unit (PMU) driver
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ */
++
++enum pfc50606_regs {
++      PCF50606_REG_ID         = 0x00,
++      PCF50606_REG_OOCS       = 0x01,
++      PCF50606_REG_INT1       = 0x02, /* Interrupt Status */
++      PCF50606_REG_INT2       = 0x03, /* Interrupt Status */
++      PCF50606_REG_INT3       = 0x04, /* Interrupt Status */
++      PCF50606_REG_INT1M      = 0x05, /* Interrupt Mask */
++      PCF50606_REG_INT2M      = 0x06, /* Interrupt Mask */
++      PCF50606_REG_INT3M      = 0x07, /* Interrupt Mask */
++      PCF50606_REG_OOCC1      = 0x08,
++      PCF50606_REG_OOCC2      = 0x09,
++      PCF50606_REG_RTCSC      = 0x0a, /* Second */
++      PCF50606_REG_RTCMN      = 0x0b, /* Minute */
++      PCF50606_REG_RTCHR      = 0x0c, /* Hour */
++      PCF50606_REG_RTCWD      = 0x0d, /* Weekday */
++      PCF50606_REG_RTCDT      = 0x0e, /* Day */
++      PCF50606_REG_RTCMT      = 0x0f, /* Month */
++      PCF50606_REG_RTCYR      = 0x10, /* Year */
++      PCF50606_REG_RTCSCA     = 0x11, /* Alarm Second */
++      PCF50606_REG_RTCMNA     = 0x12, /* Alarm Minute */
++      PCF50606_REG_RTCHRA     = 0x13, /* Alarm Hour */
++      PCF50606_REG_RTCWDA     = 0x14, /* Alarm Weekday */
++      PCF50606_REG_RTCDTA     = 0x15, /* Alarm Day */
++      PCF50606_REG_RTCMTA     = 0x16, /* Alarm Month */
++      PCF50606_REG_RTCYRA     = 0x17, /* Alarm Year */
++      PCF50606_REG_PSSC       = 0x18, /* Power sequencing */
++      PCF50606_REG_PWROKM     = 0x19, /* PWROK mask */
++      PCF50606_REG_PWROKS     = 0x1a, /* PWROK status */
++      PCF50606_REG_DCDC1      = 0x1b,
++      PCF50606_REG_DCDC2      = 0x1c,
++      PCF50606_REG_DCDC3      = 0x1d,
++      PCF50606_REG_DCDC4      = 0x1e,
++      PCF50606_REG_DCDEC1     = 0x1f,
++      PCF50606_REG_DCDEC2     = 0x20,
++      PCF50606_REG_DCUDC1     = 0x21,
++      PCF50606_REG_DCUDC2     = 0x22,
++      PCF50606_REG_IOREGC     = 0x23,
++      PCF50606_REG_D1REGC1    = 0x24,
++      PCF50606_REG_D2REGC1    = 0x25,
++      PCF50606_REG_D3REGC1    = 0x26,
++      PCF50606_REG_LPREGC1    = 0x27,
++      PCF50606_REG_LPREGC2    = 0x28,
++      PCF50606_REG_MBCC1      = 0x29,
++      PCF50606_REG_MBCC2      = 0x2a,
++      PCF50606_REG_MBCC3      = 0x2b,
++      PCF50606_REG_MBCS1      = 0x2c,
++      PCF50606_REG_BBCC       = 0x2d,
++      PCF50606_REG_ADCC1      = 0x2e,
++      PCF50606_REG_ADCC2      = 0x2f,
++      PCF50606_REG_ADCS1      = 0x30,
++      PCF50606_REG_ADCS2      = 0x31,
++      PCF50606_REG_ADCS3      = 0x32,
++      PCF50606_REG_ACDC1      = 0x33,
++      PCF50606_REG_BVMC       = 0x34,
++      PCF50606_REG_PWMC1      = 0x35,
++      PCF50606_REG_LEDC1      = 0x36,
++      PCF50606_REG_LEDC2      = 0x37,
++      PCF50606_REG_GPOC1      = 0x38,
++      PCF50606_REG_GPOC2      = 0x39,
++      PCF50606_REG_GPOC3      = 0x3a,
++      PCF50606_REG_GPOC4      = 0x3b,
++      PCF50606_REG_GPOC5      = 0x3c,
++      __NUM_PCF50606_REGS
++};
++
++enum pcf50606_reg_oocs {
++      PFC50606_OOCS_ONKEY     = 0x01,
++      PCF50606_OOCS_EXTON     = 0x02,
++      PCF50606_OOCS_PWROKRST  = 0x04,
++      PCF50606_OOCS_BATOK     = 0x08,
++      PCF50606_OOCS_BACKOK    = 0x10,
++      PCF50606_OOCS_CHGOK     = 0x20,
++      PCF50606_OOCS_TEMPOK    = 0x40,
++      PCF50606_OOCS_WDTEXP    = 0x80,
++};
++
++enum pcf50606_reg_oocc1 {
++      PCF50606_OOCC1_GOSTDBY  = 0x01,
++      PCF50606_OOCC1_TOTRST   = 0x02,
++      PCF50606_OOCC1_CLK32ON  = 0x04,
++      PCF50606_OOCC1_WDTRST   = 0x08,
++      PCF50606_OOCC1_RTCWAK   = 0x10,
++      PCF50606_OOCC1_CHGWAK   = 0x20,
++      PCF50606_OOCC1_EXTONWAK_HIGH    = 0x40,
++      PCF50606_OOCC1_EXTONWAK_LOW     = 0x80,
++};
++
++enum pcf50606_reg_oocc2 {
++      PCF50606_OOCC2_ONKEYDB_NONE     = 0x00,
++      PCF50606_OOCC2_ONKEYDB_14ms     = 0x01,
++      PCF50606_OOCC2_ONKEYDB_62ms     = 0x02,
++      PCF50606_OOCC2_ONKEYDB_500ms    = 0x03,
++      PCF50606_OOCC2_EXTONDB_NONE     = 0x00,
++      PCF50606_OOCC2_EXTONDB_14ms     = 0x04,
++      PCF50606_OOCC2_EXTONDB_62ms     = 0x08,
++      PCF50606_OOCC2_EXTONDB_500ms    = 0x0c,
++};
++
++enum pcf50606_reg_int1 {
++      PCF50606_INT1_ONKEYR    = 0x01, /* ONKEY rising edge */
++      PCF50606_INT1_ONKEYF    = 0x02, /* ONKEY falling edge */
++      PCF50606_INT1_ONKEY1S   = 0x04, /* OMKEY at least 1sec low */
++      PCF50606_INT1_EXTONR    = 0x08, /* EXTON rising edge */
++      PCF50606_INT1_EXTONF    = 0x10, /* EXTON falling edge */
++      PCF50606_INT1_SECOND    = 0x40, /* RTC periodic second interrupt */
++      PCF50606_INT1_ALARM     = 0x80, /* RTC alarm time is reached */
++};
++
++enum pcf50606_reg_int2 {
++      PCF50606_INT2_CHGINS    = 0x01, /* Charger inserted */
++      PCF50606_INT2_CHGRM     = 0x02, /* Charger removed */
++      PCF50606_INT2_CHGFOK    = 0x04, /* Fast charging OK */
++      PCF50606_INT2_CHGERR    = 0x08, /* Error in charging mode */
++      PCF50606_INT2_CHGFRDY   = 0x10, /* Fast charge completed */
++      PCF50606_INT2_CHGPROT   = 0x20, /* Charging protection interrupt */
++      PCF50606_INT2_CHGWD10S  = 0x40, /* Charger watchdig expires in 10s */
++      PCF50606_INT2_CHGWDEXP  = 0x80, /* Charger watchdog expires */
++};
++
++enum pcf50606_reg_int3 {
++      PCF50606_INT3_ADCRDY    = 0x01, /* ADC conversion finished */
++      PCF50606_INT3_ACDINS    = 0x02, /* Accessory inserted */
++      PCF50606_INT3_ACDREM    = 0x04, /* Accessory removed */
++      PCF50606_INT3_TSCPRES   = 0x08, /* Touch screen pressed */
++      PCF50606_INT3_LOWBAT    = 0x40, /* Low battery voltage */
++      PCF50606_INT3_HIGHTMP   = 0x80, /* High temperature */
++};
++
++/* used by PSSC, PWROKM, PWROKS, */
++enum pcf50606_regu {
++      PCF50606_REGU_DCD       = 0x01, /* DCD in phase 2 */
++      PCF50606_REGU_DCDE      = 0x02, /* DCDE in phase 2 */
++      PCF50606_REGU_DCUD      = 0x04, /* DCDU in phase 2 */
++      PCF50606_REGU_IO        = 0x08, /* IO in phase 2 */
++      PCF50606_REGU_D1        = 0x10, /* D1 in phase 2 */
++      PCF50606_REGU_D2        = 0x20, /* D2 in phase 2 */
++      PCF50606_REGU_D3        = 0x40, /* D3 in phase 2 */
++      PCF50606_REGU_LP        = 0x80, /* LP in phase 2 */
++};
++
++enum pcf50606_reg_dcdc4 {
++      PCF50606_DCDC4_MODE_AUTO        = 0x00,
++      PCF50606_DCDC4_MODE_PWM         = 0x01,
++      PCF50606_DCDC4_MODE_PCF         = 0x02,
++      PCF50606_DCDC4_OFF_FLOAT        = 0x00,
++      PCF50606_DCDC4_OFF_BYPASS       = 0x04,
++      PCF50606_DCDC4_OFF_PULLDOWN     = 0x08,
++      PCF50606_DCDC4_CURLIM_500mA     = 0x00,
++      PCF50606_DCDC4_CURLIM_750mA     = 0x10,
++      PCF50606_DCDC4_CURLIM_1000mA    = 0x20,
++      PCF50606_DCDC4_CURLIM_1250mA    = 0x30,
++      PCF50606_DCDC4_TOGGLE           = 0x40,
++      PCF50606_DCDC4_REGSEL_DCDC2     = 0x80,
++};
++
++enum pcf50606_reg_dcdec2 {
++      PCF50606_DCDEC2_MODE_AUTO       = 0x00,
++      PCF50606_DCDEC2_MODE_PWM        = 0x01,
++      PCF50606_DCDEC2_MODE_PCF        = 0x02,
++      PCF50606_DCDEC2_OFF_FLOAT       = 0x00,
++      PCF50606_DCDEC2_OFF_BYPASS      = 0x04,
++};
++
++enum pcf50606_reg_dcudc2 {
++      PCF50606_DCUDC2_MODE_AUTO       = 0x00,
++      PCF50606_DCUDC2_MODE_PWM        = 0x01,
++      PCF50606_DCUDC2_MODE_PCF        = 0x02,
++      PCF50606_DCUDC2_OFF_FLOAT       = 0x00,
++      PCF50606_DCUDC2_OFF_BYPASS      = 0x04,
++};
++
++enum pcf50606_reg_adcc1 {
++      PCF50606_ADCC1_TSCMODACT        = 0x01,
++      PCF50606_ADCC1_TSCMODSTB        = 0x02,
++      PCF50606_ADCC1_TRATSET          = 0x04,
++      PCF50606_ADCC1_NTCSWAPE         = 0x08,
++      PCF50606_ADCC1_NTCSWAOFF        = 0x10,
++      PCF50606_ADCC1_EXTSYNCBREAK     = 0x20,
++      /* reserved */
++      PCF50606_ADCC1_TSCINT           = 0x80,
++};
++
++enum pcf50606_reg_adcc2 {
++      PCF50606_ADCC2_ADCSTART         = 0x01,
++      /* see enum pcf50606_adcc2_adcmux */
++      PCF50606_ADCC2_SYNC_NONE        = 0x00,
++      PCF50606_ADCC2_SYNC_TXON        = 0x20,
++      PCF50606_ADCC2_SYNC_PWREN1      = 0x40,
++      PCF50606_ADCC2_SYNC_PWREN2      = 0x60,
++      PCF50606_ADCC2_RES_10BIT        = 0x00,
++      PCF50606_ADCC2_RES_8BIT         = 0x80,
++};
++
++#define PCF50606_ADCC2_ADCMUX_MASK    (0xf << 1)
++
++#define ADCMUX_SHIFT  1
++enum pcf50606_adcc2_adcmux {
++      PCF50606_ADCMUX_BATVOLT_RES     = 0x0 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_BATVOLT_SUBTR   = 0x1 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_ADCIN1_RES      = 0x2 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_ADCIN1_SUBTR    = 0x3 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_BATTEMP         = 0x4 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_ADCIN2          = 0x5 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_ADCIN3          = 0x6 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_ADCIN3_RATIO    = 0x7 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_XPOS            = 0x8 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_YPOS            = 0x9 << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_P1              = 0xa << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_P2              = 0xb << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_BATVOLT_ADCIN1  = 0xc << ADCMUX_SHIFT,
++      PCF50606_ADCMUX_XY_SEQUENCE     = 0xe << ADCMUX_SHIFT,
++      PCF50606_P1_P2_RESISTANCE       = 0xf << ADCMUX_SHIFT,
++};
++
++enum pcf50606_adcs2 {
++      PCF50606_ADCS2_ADCRDY           = 0x80,
++};
++
++enum pcf50606_reg_mbcc1 {
++      PCF50606_MBCC1_CHGAPE           = 0x01,
++      PCF50606_MBCC1_AUTOFST          = 0x02,
++#define       PCF50606_MBCC1_CHGMOD_MASK        0x1c
++#define       PCF50606_MBCC1_CHGMOD_SHIFT       2
++      PCF50606_MBCC1_CHGMOD_QUAL      = 0x00,
++      PCF50606_MBCC1_CHGMOD_PRE       = 0x04,
++      PCF50606_MBCC1_CHGMOD_TRICKLE   = 0x08,
++      PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c,
++      PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10,
++      PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14,
++      PCF50606_MBCC1_CHGMOD_FAST_SW   = 0x18,
++      PCF50606_MBCC1_CHGMOD_IDLE      = 0x1c,
++      PCF50606_MBCC1_DETMOD_LOWCHG    = 0x20,
++      PCF50606_MBCC1_DETMOD_WDRST     = 0x40,
++};
++
++enum pcf50606_reg_acdc1 {
++      PCF50606_ACDC1_ACDDET           = 0x01,
++      PCF50606_ACDC1_THRSHLD_1V0      = 0x00,
++      PCF50606_ACDC1_THRSHLD_1V2      = 0x02,
++      PCF50606_ACDC1_THRSHLD_1V4      = 0x04,
++      PCF50606_ACDC1_THRSHLD_1V6      = 0x06,
++      PCF50606_ACDC1_THRSHLD_1V8      = 0x08,
++      PCF50606_ACDC1_THRSHLD_2V0      = 0x0a,
++      PCF50606_ACDC1_THRSHLD_2V2      = 0x0c,
++      PCF50606_ACDC1_THRSHLD_2V4      = 0x0e,
++      PCF50606_ACDC1_DISDB            = 0x10,
++      PCF50606_ACDC1_ACDAPE           = 0x80,
++};
++
++enum pcf50606_reg_bvmc {
++      PCF50606_BVMC_LOWBAT            = 0x01,
++      PCF50606_BVMC_THRSHLD_NULL      = 0x00,
++      PCF50606_BVMC_THRSHLD_2V8       = 0x02,
++      PCF50606_BVMC_THRSHLD_2V9       = 0x04,
++      PCF50606_BVMC_THRSHLD_3V        = 0x08,
++      PCF50606_BVMC_THRSHLD_3V1       = 0x08,
++      PCF50606_BVMC_THRSHLD_3V2       = 0x0a,
++      PCF50606_BVMC_THRSHLD_3V3       = 0x0c,
++      PCF50606_BVMC_THRSHLD_3V4       = 0x0e,
++      PCF50606_BVMC_DISDB             = 0x10,
++};
++
++enum pcf50606_reg_pwmc1 {
++      PCF50606_PWMC1_ACTSET           = 0x01,
++      PCF50606_PWMC1_PWMDC_0_16       = 0x00,
++      PCF50606_PWMC1_PWMDC_1_16       = 0x02,
++      PCF50606_PWMC1_PWMDC_2_16       = 0x04,
++      PCF50606_PWMC1_PWMDC_3_16       = 0x06,
++      PCF50606_PWMC1_PWMDC_4_16       = 0x08,
++      PCF50606_PWMC1_PWMDC_5_16       = 0x0a,
++      PCF50606_PWMC1_PWMDC_6_16       = 0x0c,
++      PCF50606_PWMC1_PWMDC_7_16       = 0x0e,
++      PCF50606_PWMC1_PWMDC_8_16       = 0x10,
++      PCF50606_PWMC1_PWMDC_9_16       = 0x12,
++      PCF50606_PWMC1_PWMDC_10_16      = 0x14,
++      PCF50606_PWMC1_PWMDC_11_16      = 0x16,
++      PCF50606_PWMC1_PWMDC_12_16      = 0x18,
++      PCF50606_PWMC1_PWMDC_13_16      = 0x1a,
++      PCF50606_PWMC1_PWMDC_14_16      = 0x1c,
++      PCF50606_PWMC1_PWMDC_15_16      = 0x1e,
++      PCF50606_PWMC1_PRESC_512Hz      = 0x20,
++      PCF50606_PWMC1_PRESC_256Hz      = 0x40,
++      PCF50606_PWMC1_PRESC_64Hz       = 0x60,
++      PCF50606_PWMC1_PRESC_56kHz      = 0x80,
++      PCF50606_PWMC1_PRESC_28kHz      = 0xa0,
++      PCF50606_PWMC1_PRESC_14kHz      = 0xc0,
++      PCF50606_PWMC1_PRESC_7kHz       = 0xe0,
++};
++#define PCF50606_PWMC1_CLK_SHIFT      5
++#define PCF50606_PWMC1_DC_SHIFT               1
++
++#endif /* _PCF50606_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50633.h linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50633.h
+--- linux-2.6.29-rc3.owrt/drivers/i2c/chips/pcf50633.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/chips/pcf50633.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,349 @@
++#ifndef _PCF50633_H
++#define _PCF50633_H
++
++/* Philips PCF50633 Power Managemnt Unit (PMU) driver
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ */
++
++enum pfc50633_regs {
++      PCF50633_REG_VERSION    = 0x00,
++      PCF50633_REG_VARIANT    = 0x01,
++      PCF50633_REG_INT1       = 0x02, /* Interrupt Status */
++      PCF50633_REG_INT2       = 0x03, /* Interrupt Status */
++      PCF50633_REG_INT3       = 0x04, /* Interrupt Status */
++      PCF50633_REG_INT4       = 0x05, /* Interrupt Status */
++      PCF50633_REG_INT5       = 0x06, /* Interrupt Status */
++      PCF50633_REG_INT1M      = 0x07, /* Interrupt Mask */
++      PCF50633_REG_INT2M      = 0x08, /* Interrupt Mask */
++      PCF50633_REG_INT3M      = 0x09, /* Interrupt Mask */
++      PCF50633_REG_INT4M      = 0x0a, /* Interrupt Mask */
++      PCF50633_REG_INT5M      = 0x0b, /* Interrupt Mask */
++      PCF50633_REG_OOCSHDWN   = 0x0c,
++      PCF50633_REG_OOCWAKE    = 0x0d,
++      PCF50633_REG_OOCTIM1    = 0x0e,
++      PCF50633_REG_OOCTIM2    = 0x0f,
++      PCF50633_REG_OOCMODE    = 0x10,
++      PCF50633_REG_OOCCTL     = 0x11,
++      PCF50633_REG_OOCSTAT    = 0x12,
++      PCF50633_REG_GPIOCTL    = 0x13,
++      PCF50633_REG_GPIO1CFG   = 0x14,
++      PCF50633_REG_GPIO2CFG   = 0x15,
++      PCF50633_REG_GPIO3CFG   = 0x16,
++      PCF50633_REG_GPOCFG     = 0x17,
++      PCF50633_REG_BVMCTL     = 0x18,
++      PCF50633_REG_SVMCTL     = 0x19,
++      PCF50633_REG_AUTOOUT    = 0x1a,
++      PCF50633_REG_AUTOENA    = 0x1b,
++      PCF50633_REG_AUTOCTL    = 0x1c,
++      PCF50633_REG_AUTOMXC    = 0x1d,
++      PCF50633_REG_DOWN1OUT   = 0x1e,
++      PCF50633_REG_DOWN1ENA   = 0x1f,
++      PCF50633_REG_DOWN1CTL   = 0x20,
++      PCF50633_REG_DOWN1MXC   = 0x21,
++      PCF50633_REG_DOWN2OUT   = 0x22,
++      PCF50633_REG_DOWN2ENA   = 0x23,
++      PCF50633_REG_DOWN2CTL   = 0x24,
++      PCF50633_REG_DOWN2MXC   = 0x25,
++      PCF50633_REG_MEMLDOOUT  = 0x26,
++      PCF50633_REG_MEMLDOENA  = 0x27,
++      PCF50633_REG_LEDOUT     = 0x28,
++      PCF50633_REG_LEDENA     = 0x29,
++      PCF50633_REG_LEDCTL     = 0x2a,
++      PCF50633_REG_LEDDIM     = 0x2b,
++      /* reserved */
++      PCF50633_REG_LDO1OUT    = 0x2d,
++      PCF50633_REG_LDO1ENA    = 0x2e,
++      PCF50633_REG_LDO2OUT    = 0x2f,
++      PCF50633_REG_LDO2ENA    = 0x30,
++      PCF50633_REG_LDO3OUT    = 0x31,
++      PCF50633_REG_LDO3ENA    = 0x32,
++      PCF50633_REG_LDO4OUT    = 0x33,
++      PCF50633_REG_LDO4ENA    = 0x34,
++      PCF50633_REG_LDO5OUT    = 0x35,
++      PCF50633_REG_LDO5ENA    = 0x36,
++      PCF50633_REG_LDO6OUT    = 0x37,
++      PCF50633_REG_LDO6ENA    = 0x38,
++      PCF50633_REG_HCLDOOUT   = 0x39,
++      PCF50633_REG_HCLDOENA   = 0x3a,
++      PCF50633_REG_STBYCTL1   = 0x3b,
++      PCF50633_REG_STBYCTL2   = 0x3c,
++      PCF50633_REG_DEBPF1     = 0x3d,
++      PCF50633_REG_DEBPF2     = 0x3e,
++      PCF50633_REG_DEBPF3     = 0x3f,
++      PCF50633_REG_HCLDOOVL   = 0x40,
++      PCF50633_REG_DCDCSTAT   = 0x41,
++      PCF50633_REG_LDOSTAT    = 0x42,
++      PCF50633_REG_MBCC1      = 0x43,
++      PCF50633_REG_MBCC2      = 0x44,
++      PCF50633_REG_MBCC3      = 0x45,
++      PCF50633_REG_MBCC4      = 0x46,
++      PCF50633_REG_MBCC5      = 0x47,
++      PCF50633_REG_MBCC6      = 0x48,
++      PCF50633_REG_MBCC7      = 0x49,
++      PCF50633_REG_MBCC8      = 0x4a,
++      PCF50633_REG_MBCS1      = 0x4b,
++      PCF50633_REG_MBCS2      = 0x4c,
++      PCF50633_REG_MBCS3      = 0x4d,
++      PCF50633_REG_BBCCTL     = 0x4e,
++      PCF50633_REG_ALMGAIN    = 0x4f,
++      PCF50633_REG_ALMDATA    = 0x50,
++      /* reserved */
++      PCF50633_REG_ADCC3      = 0x52,
++      PCF50633_REG_ADCC2      = 0x53,
++      PCF50633_REG_ADCC1      = 0x54,
++      PCF50633_REG_ADCS1      = 0x55,
++      PCF50633_REG_ADCS2      = 0x56,
++      PCF50633_REG_ADCS3      = 0x57,
++      /* reserved */
++      PCF50633_REG_RTCSC      = 0x59, /* Second */
++      PCF50633_REG_RTCMN      = 0x5a, /* Minute */
++      PCF50633_REG_RTCHR      = 0x5b, /* Hour */
++      PCF50633_REG_RTCWD      = 0x5c, /* Weekday */
++      PCF50633_REG_RTCDT      = 0x5d, /* Day */
++      PCF50633_REG_RTCMT      = 0x5e, /* Month */
++      PCF50633_REG_RTCYR      = 0x5f, /* Year */
++      PCF50633_REG_RTCSCA     = 0x60, /* Alarm Second */
++      PCF50633_REG_RTCMNA     = 0x61, /* Alarm Minute */
++      PCF50633_REG_RTCHRA     = 0x62, /* Alarm Hour */
++      PCF50633_REG_RTCWDA     = 0x63, /* Alarm Weekday */
++      PCF50633_REG_RTCDTA     = 0x64, /* Alarm Day */
++      PCF50633_REG_RTCMTA     = 0x65, /* Alarm Month */
++      PCF50633_REG_RTCYRA     = 0x66, /* Alarm Year */
++
++      PCF50633_REG_MEMBYTE0   = 0x67,
++      PCF50633_REG_MEMBYTE1   = 0x68,
++      PCF50633_REG_MEMBYTE2   = 0x69,
++      PCF50633_REG_MEMBYTE3   = 0x6a,
++      PCF50633_REG_MEMBYTE4   = 0x6b,
++      PCF50633_REG_MEMBYTE5   = 0x6c,
++      PCF50633_REG_MEMBYTE6   = 0x6d,
++      PCF50633_REG_MEMBYTE7   = 0x6e,
++      /* reserved */
++      PCF50633_REG_DCDCPFM    = 0x84,
++      __NUM_PCF50633_REGS
++};
++
++
++enum pcf50633_reg_oocshdwn {
++      PCF50633_OOCSHDWN_GOSTDBY       = 0x01,
++      PCF50633_OOCSHDWN_TOTRST        = 0x04,
++      PCF50633_OOCSHDWN_COLDBOOT      = 0x08,
++};
++
++enum pcf50633_reg_oocwake {
++      PCF50633_OOCWAKE_ONKEY          = 0x01,
++      PCF50633_OOCWAKE_EXTON1         = 0x02,
++      PCF50633_OOCWAKE_EXTON2         = 0x04,
++      PCF50633_OOCWAKE_EXTON3         = 0x08,
++      PCF50633_OOCWAKE_RTC            = 0x10,
++      /* reserved */
++      PCF50633_OOCWAKE_USB            = 0x40,
++      PCF50633_OOCWAKE_ADP            = 0x80,
++};
++
++enum pcf50633_reg_mbcc1 {
++      PCF50633_MBCC1_CHGENA           = 0x01, /* Charger enable */
++      PCF50633_MBCC1_AUTOSTOP         = 0x02,
++      PCF50633_MBCC1_AUTORES          = 0x04, /* automatic resume */
++      PCF50633_MBCC1_RESUME           = 0x08, /* explicit resume cmd */
++      PCF50633_MBCC1_RESTART          = 0x10, /* restart charging */
++      PCF50633_MBCC1_PREWDTIME_60M    = 0x20, /* max. precharging time */
++      PCF50633_MBCC1_WDTIME_1H        = 0x00,
++      PCF50633_MBCC1_WDTIME_2H        = 0x40,
++      PCF50633_MBCC1_WDTIME_4H        = 0x80,
++      PCF50633_MBCC1_WDTIME_6H        = 0xc0,
++};
++#define PCF50633_MBCC1_WDTIME_MASK      0xc0
++
++enum pcf50633_reg_mbcc2 {
++      PCF50633_MBCC2_VBATCOND_2V7     = 0x00,
++      PCF50633_MBCC2_VBATCOND_2V85    = 0x01,
++      PCF50633_MBCC2_VBATCOND_3V0     = 0x02,
++      PCF50633_MBCC2_VBATCOND_3V15    = 0x03,
++      PCF50633_MBCC2_VMAX_4V          = 0x00,
++      PCF50633_MBCC2_VMAX_4V20        = 0x28,
++      PCF50633_MBCC2_VRESDEBTIME_64S  = 0x80, /* debounce time (32/64sec) */
++};
++#define       PCF50633_MBCC2_VBATCOND_MASK      0x03
++#define PCF50633_MBCC2_VMAX_MASK        0x3c
++
++enum pcf50633_reg_adcc1 {
++      PCF50633_ADCC1_ADCSTART         = 0x01,
++      PCF50633_ADCC1_RES_10BIT        = 0x02,
++      PCF50633_ADCC1_AVERAGE_NO       = 0x00,
++      PCF50633_ADCC1_AVERAGE_4        = 0x04,
++      PCF50633_ADCC1_AVERAGE_8        = 0x08,
++      PCF50633_ADCC1_AVERAGE_16       = 0x0c,
++
++      PCF50633_ADCC1_MUX_BATSNS_RES   = 0x00,
++      PCF50633_ADCC1_MUX_BATSNS_SUBTR = 0x10,
++      PCF50633_ADCC1_MUX_ADCIN2_RES   = 0x20,
++      PCF50633_ADCC1_MUX_ADCIN2_SUBTR = 0x30,
++      PCF50633_ADCC1_MUX_BATTEMP      = 0x60,
++      PCF50633_ADCC1_MUX_ADCIN1       = 0x70,
++};
++#define PCF50633_ADCC1_AVERAGE_MASK   0x0c
++#define       PCF50633_ADCC1_ADCMUX_MASK      0xf0
++
++enum pcf50633_reg_adcc2 {
++      PCF50633_ADCC2_RATIO_NONE       = 0x00,
++      PCF50633_ADCC2_RATIO_BATTEMP    = 0x01,
++      PCF50633_ADCC2_RATIO_ADCIN1     = 0x02,
++      PCF50633_ADCC2_RATIO_BOTH       = 0x03,
++      PCF50633_ADCC2_RATIOSETTL_100US = 0x04,
++};
++#define PCF50633_ADCC2_RATIO_MASK     0x03
++
++enum pcf50633_reg_adcc3 {
++      PCF50633_ADCC3_ACCSW_EN         = 0x01,
++      PCF50633_ADCC3_NTCSW_EN         = 0x04,
++      PCF50633_ADCC3_RES_DIV_TWO      = 0x10,
++      PCF50633_ADCC3_RES_DIV_THREE    = 0x00,
++};
++
++enum pcf50633_reg_adcs3 {
++      PCF50633_ADCS3_REF_NTCSW        = 0x00,
++      PCF50633_ADCS3_REF_ACCSW        = 0x10,
++      PCF50633_ADCS3_REF_2V0          = 0x20,
++      PCF50633_ADCS3_REF_VISA         = 0x30,
++      PCF50633_ADCS3_REF_2V0_2        = 0x70,
++      PCF50633_ADCS3_ADCRDY           = 0x80,
++};
++#define PCF50633_ADCS3_ADCDAT1L_MASK  0x03
++#define PCF50633_ADCS3_ADCDAT2L_MASK  0x0c
++#define PCF50633_ADCS3_ADCDAT2L_SHIFT 2
++#define PCF50633_ASCS3_REF_MASK               0x70
++
++enum pcf50633_regulator_enable {
++      PCF50633_REGULATOR_ON           = 0x01,
++      PCF50633_REGULATOR_ON_GPIO1     = 0x02,
++      PCF50633_REGULATOR_ON_GPIO2     = 0x04,
++      PCF50633_REGULATOR_ON_GPIO3     = 0x08,
++};
++#define PCF50633_REGULATOR_ON_MASK    0x0f
++
++enum pcf50633_regulator_phase {
++      PCF50633_REGULATOR_ACTPH1       = 0x00,
++      PCF50633_REGULATOR_ACTPH2       = 0x10,
++      PCF50633_REGULATOR_ACTPH3       = 0x20,
++      PCF50633_REGULATOR_ACTPH4       = 0x30,
++};
++#define PCF50633_REGULATOR_ACTPH_MASK 0x30
++
++enum pcf50633_reg_gpocfg {
++      PCF50633_GPOCFG_GPOSEL_0        = 0x00,
++      PCF50633_GPOCFG_GPOSEL_LED_NFET = 0x01,
++      PCF50633_GPOCFG_GPOSEL_SYSxOK   = 0x02,
++      PCF50633_GPOCFG_GPOSEL_CLK32K   = 0x03,
++      PCF50633_GPOCFG_GPOSEL_ADAPUSB  = 0x04,
++      PCF50633_GPOCFG_GPOSEL_USBxOK   = 0x05,
++      PCF50633_GPOCFG_GPOSEL_ACTPH4   = 0x06,
++      PCF50633_GPOCFG_GPOSEL_1        = 0x07,
++      PCF50633_GPOCFG_GPOSEL_INVERSE  = 0x08,
++};
++#define PCF50633_GPOCFG_GPOSEL_MASK   0x07
++
++#if 0
++enum pcf50633_reg_mbcc1 {
++      PCF50633_MBCC1_CHGENA           = 0x01,
++      PCF50633_MBCC1_AUTOSTOP         = 0x02,
++      PCF50633_MBCC1_AUTORES          = 0x04,
++      PCF50633_MBCC1_RESUME           = 0x08,
++      PCF50633_MBCC1_RESTART          = 0x10,
++      PCF50633_MBCC1_PREWDTIME_30MIN  = 0x00,
++      PCF50633_MBCC1_PREWDTIME_60MIN  = 0x20,
++      PCF50633_MBCC1_WDTIME_2HRS      = 0x40,
++      PCF50633_MBCC1_WDTIME_4HRS      = 0x80,
++      PCF50633_MBCC1_WDTIME_6HRS      = 0xc0,
++};
++
++enum pcf50633_reg_mbcc2 {
++      PCF50633_MBCC2_VBATCOND_2V7     = 0x00,
++      PCF50633_MBCC2_VBATCOND_2V85    = 0x01,
++      PCF50633_MBCC2_VBATCOND_3V0     = 0x02,
++      PCF50633_MBCC2_VBATCOND_3V15    = 0x03,
++      PCF50633_MBCC2_VRESDEBTIME_64S  = 0x80,
++};
++#define PCF50633_MBCC2_VMAX_MASK      0x3c
++#endif
++
++enum pcf50633_reg_mbcc7 {
++      PCF50633_MBCC7_USB_100mA        = 0x00,
++      PCF50633_MBCC7_USB_500mA        = 0x01,
++      PCF50633_MBCC7_USB_1000mA       = 0x02,
++      PCF50633_MBCC7_USB_SUSPEND      = 0x03,
++      PCF50633_MBCC7_BATTEMP_EN       = 0x04,
++      PCF50633_MBCC7_BATSYSIMAX_1A6   = 0x00,
++      PCF50633_MBCC7_BATSYSIMAX_1A8   = 0x40,
++      PCF50633_MBCC7_BATSYSIMAX_2A0   = 0x80,
++      PCF50633_MBCC7_BATSYSIMAX_2A2   = 0xc0,
++};
++#define PCF56033_MBCC7_USB_MASK               0x03
++
++enum pcf50633_reg_mbcc8 {
++      PCF50633_MBCC8_USBENASUS        = 0x10,
++};
++
++enum pcf50633_reg_mbcs1 {
++      PCF50633_MBCS1_USBPRES          = 0x01,
++      PCF50633_MBCS1_USBOK            = 0x02,
++      PCF50633_MBCS1_ADAPTPRES        = 0x04,
++      PCF50633_MBCS1_ADAPTOK          = 0x08,
++      PCF50633_MBCS1_TBAT_OK          = 0x00,
++      PCF50633_MBCS1_TBAT_ABOVE       = 0x10,
++      PCF50633_MBCS1_TBAT_BELOW       = 0x20,
++      PCF50633_MBCS1_TBAT_UNDEF       = 0x30,
++      PCF50633_MBCS1_PREWDTEXP        = 0x40,
++      PCF50633_MBCS1_WDTEXP           = 0x80,
++};
++
++enum pcf50633_reg_mbcs2_mbcmod {
++      PCF50633_MBCS2_MBC_PLAY         = 0x00,
++      PCF50633_MBCS2_MBC_USB_PRE      = 0x01,
++      PCF50633_MBCS2_MBC_USB_PRE_WAIT = 0x02,
++      PCF50633_MBCS2_MBC_USB_FAST     = 0x03,
++      PCF50633_MBCS2_MBC_USB_FAST_WAIT= 0x04,
++      PCF50633_MBCS2_MBC_USB_SUSPEND  = 0x05,
++      PCF50633_MBCS2_MBC_ADP_PRE      = 0x06,
++      PCF50633_MBCS2_MBC_ADP_PRE_WAIT = 0x07,
++      PCF50633_MBCS2_MBC_ADP_FAST     = 0x08,
++      PCF50633_MBCS2_MBC_ADP_FAST_WAIT= 0x09,
++      PCF50633_MBCS2_MBC_BAT_FULL     = 0x0a,
++      PCF50633_MBCS2_MBC_HALT         = 0x0b,
++};
++#define PCF50633_MBCS2_MBC_MASK               0x0f
++enum pcf50633_reg_mbcs2_chgstat {
++      PCF50633_MBCS2_CHGS_NONE        = 0x00,
++      PCF50633_MBCS2_CHGS_ADAPTER     = 0x10,
++      PCF50633_MBCS2_CHGS_USB         = 0x20,
++      PCF50633_MBCS2_CHGS_BOTH        = 0x30,
++};
++#define PCF50633_MBCS2_RESSTAT_AUTO   0x40
++
++enum pcf50633_reg_mbcs3 {
++      PCF50633_MBCS3_USBLIM_PLAY      = 0x01,
++      PCF50633_MBCS3_USBLIM_CGH       = 0x02,
++      PCF50633_MBCS3_TLIM_PLAY        = 0x04,
++      PCF50633_MBCS3_TLIM_CHG         = 0x08,
++      PCF50633_MBCS3_ILIM             = 0x10, /* 1: Ibat > Icutoff */
++      PCF50633_MBCS3_VLIM             = 0x20, /* 1: Vbat == Vmax */
++      PCF50633_MBCS3_VBATSTAT         = 0x40, /* 1: Vbat > Vbatcond */
++      PCF50633_MBCS3_VRES             = 0x80, /* 1: Vbat > Vth(RES) */
++};
++
++/* this is to be provided by the board implementation */
++extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS];
++
++void pcf50633_reg_write(u_int8_t reg, u_int8_t val);
++
++u_int8_t pcf50633_reg_read(u_int8_t reg);
++
++void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
++void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits);
++
++void pcf50633_charge_autofast(int on);
++
++#endif /* _PCF50606_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/i2c/i2c-core.c linux-2.6.29-rc3.owrt.om/drivers/i2c/i2c-core.c
+--- linux-2.6.29-rc3.owrt/drivers/i2c/i2c-core.c       2009-05-10 22:08:42.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/i2c/i2c-core.c    2009-05-10 22:27:59.000000000 +0200
+@@ -1,4 +1,3 @@
+-/* i2c-core.c - a device driver for the iic-bus interface                  */
+ /* ------------------------------------------------------------------------- */
+ /*   Copyright (C) 1995-99 Simon G. Vogl
+@@ -158,10 +157,16 @@
+       if (!dev->driver)
+               return 0;
++#if 0
+       driver = to_i2c_driver(dev->driver);
+       if (!driver->suspend)
+               return 0;
+       return driver->suspend(to_i2c_client(dev), mesg);
++#else
++      if (!dev->driver->suspend)
++              return 0;
++      return dev->driver->suspend(dev, mesg);
++#endif
+ }
+ static int i2c_device_resume(struct device * dev)
+@@ -170,10 +175,16 @@
+       if (!dev->driver)
+               return 0;
++#if 0
+       driver = to_i2c_driver(dev->driver);
+       if (!driver->resume)
+               return 0;
+       return driver->resume(to_i2c_client(dev));
++#else
++      if (!dev->driver->resume)
++              return 0;
++      return dev->driver->resume(dev);
++#endif
+ }
+ static void i2c_client_release(struct device *dev)
+@@ -1129,11 +1140,11 @@
+       int err;
+       /* Make sure the address is valid */
+-      if (addr < 0x03 || addr > 0x77) {
++      /*if (addr < 0x03 || addr > 0x77) {
+               dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+                        addr);
+               return -EINVAL;
+-      }
++      }*/
+       /* Skip if already in use */
+       if (i2c_check_addr(adapter, addr))
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/keyboard/gpio_keys.c linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/gpio_keys.c
+--- linux-2.6.29-rc3.owrt/drivers/input/keyboard/gpio_keys.c   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/gpio_keys.c        2009-05-10 22:27:59.000000000 +0200
+@@ -23,7 +23,7 @@
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+-#include <asm/gpio.h>
++#include <mach/gpio.h>
+ struct gpio_button_data {
+       struct gpio_keys_button *button;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/keyboard/Kconfig linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/input/keyboard/Kconfig       2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/Kconfig    2009-05-10 22:27:59.000000000 +0200
+@@ -332,4 +332,21 @@
+         To compile this driver as a module, choose M here: the
+         module will be called sh_keysc.
++config KEYBOARD_NEO1973
++      tristate "FIC Neo1973 buttons"
++      depends on MACH_NEO1973
++      default y
++      help
++        Say Y here to enable the buttons on the FIC Neo1973
++        GSM phone.
++
++        To compile this driver as a module, choose M here: the
++        module will be called neo1973kbd.
++
++config KEYBOARD_QT2410
++      tristate "QT2410 buttons"
++      depends on MACH_QT2410
++      default y
++
++
+ endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/keyboard/Makefile linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/input/keyboard/Makefile      2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/Makefile   2009-05-10 22:27:59.000000000 +0200
+@@ -14,6 +14,8 @@
+ obj-$(CONFIG_KEYBOARD_NEWTON)         += newtonkbd.o
+ obj-$(CONFIG_KEYBOARD_STOWAWAY)               += stowaway.o
+ obj-$(CONFIG_KEYBOARD_CORGI)          += corgikbd.o
++obj-$(CONFIG_KEYBOARD_NEO1973)                += neo1973kbd.o
++obj-$(CONFIG_KEYBOARD_QT2410)         += qt2410kbd.o
+ obj-$(CONFIG_KEYBOARD_SPITZ)          += spitzkbd.o
+ obj-$(CONFIG_KEYBOARD_TOSA)           += tosakbd.o
+ obj-$(CONFIG_KEYBOARD_HIL)            += hil_kbd.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/keyboard/neo1973kbd.c linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/neo1973kbd.c
+--- linux-2.6.29-rc3.owrt/drivers/input/keyboard/neo1973kbd.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/neo1973kbd.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,467 @@
++/*
++ * Keyboard driver for FIC Neo1973 GSM phone
++ *
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * inspired by corkgbd.c by Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#include <mach/gpio.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_PM
++extern int global_inside_suspend;
++#else
++#define global_inside_suspend 0
++#endif
++
++struct neo1973kbd {
++      struct platform_device *pdev;
++      struct input_dev *input;
++      struct device *cdev;
++      struct work_struct work;
++      int aux_state;
++      int work_in_progress;
++      int hp_irq_count_in_work;
++      int hp_irq_count;
++      int jack_irq;
++};
++
++static struct class *neo1973kbd_switch_class;
++
++enum keys {
++      NEO1973_KEY_AUX,    /* GTA01 / 02 only */
++      NEO1973_KEY_HOLD,
++      NEO1973_KEY_JACK,
++      NEO1973_KEY_PLUS,   /* GTA03 only */
++      NEO1973_KEY_MINUS,  /* GTA03 only */
++};
++
++struct neo1973kbd_key {
++      const char * name;
++      irqreturn_t (*isr)(int irq, void *dev_id);
++      int irq;
++      int input_key;
++};
++
++static irqreturn_t neo1973kbd_aux_irq(int irq, void *dev_id);
++static irqreturn_t neo1973kbd_headphone_irq(int irq, void *dev_id);
++static irqreturn_t neo1973kbd_default_key_irq(int irq, void *dev_id);
++
++
++static struct neo1973kbd_key keys[] = {
++      [NEO1973_KEY_AUX] = {
++              .name = "Neo1973 AUX button",
++              .isr = neo1973kbd_aux_irq,
++              .input_key = KEY_PHONE,
++      },
++      [NEO1973_KEY_HOLD] = {
++              .name = "Neo1973 HOLD button",
++              .isr = neo1973kbd_default_key_irq,
++              .input_key = KEY_PAUSE,
++      },
++      [NEO1973_KEY_JACK] = {
++              .name = "Neo1973 Headphone jack",
++              .isr = neo1973kbd_headphone_irq,
++      },
++      [NEO1973_KEY_PLUS] = {
++              .name = "GTA03 PLUS button",
++              .isr = neo1973kbd_default_key_irq,
++              .input_key = KEY_KPPLUS,
++      },
++      [NEO1973_KEY_MINUS] = {
++              .name = "GTA03 MINUS button",
++              .isr = neo1973kbd_default_key_irq,
++              .input_key = KEY_KPMINUS,
++      },
++};
++
++/* This timer section filters AUX button IRQ bouncing */
++
++static void aux_key_timer_f(unsigned long data);
++
++static struct timer_list aux_key_timer =
++              TIMER_INITIALIZER(aux_key_timer_f, 0, 0);
++
++#define AUX_TIMER_TIMEOUT (HZ >> 7)
++#define AUX_TIMER_ALLOWED_NOOP 2
++#define AUX_TIMER_CONSECUTIVE_EVENTS 5
++
++struct neo1973kbd *timer_kbd;
++
++static void aux_key_timer_f(unsigned long data)
++{
++      static int noop_counter;
++      static int last_key = -1;
++      static int last_count;
++      int key_pressed;
++
++      key_pressed =
++          !gpio_get_value(timer_kbd->pdev->resource[NEO1973_KEY_AUX].start);
++      if (machine_is_neo1973_gta02())
++              key_pressed = !key_pressed;
++
++      if (likely(key_pressed == last_key))
++              last_count++;
++      else {
++              last_count = 1;
++              last_key = key_pressed;
++      }
++
++      if (unlikely(last_count >= AUX_TIMER_CONSECUTIVE_EVENTS)) {
++              if (timer_kbd->aux_state != last_key) {
++                      input_report_key(timer_kbd->input, KEY_PHONE, last_key);
++                      input_sync(timer_kbd->input);
++
++                      timer_kbd->aux_state = last_key;
++                      noop_counter = 0;
++              }
++              last_count = 0;
++              if (unlikely(++noop_counter > AUX_TIMER_ALLOWED_NOOP)) {
++                      noop_counter = 0;
++                      return;
++              }
++      }
++
++      mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
++}
++
++static irqreturn_t neo1973kbd_aux_irq(int irq, void *dev)
++{
++      mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
++
++      return IRQ_HANDLED;
++}
++
++static irqreturn_t neo1973kbd_default_key_irq(int irq, void *dev_id)
++{
++      struct neo1973kbd *kbd = dev_id;
++      int n;
++
++      for (n = 0; n < ARRAY_SIZE(keys); n++) {
++
++              if (irq != keys[n].irq)
++                      continue;
++
++              input_report_key(kbd->input, keys[n].input_key,
++                                gpio_get_value(kbd->pdev->resource[n].start));
++              input_sync(kbd->input);
++      }
++
++      return IRQ_HANDLED;
++}
++
++
++static const char *event_array_jack[2][4] = {
++      [0] = {
++              "SWITCH_NAME=headset",
++              "SWITCH_STATE=0",
++              "EVENT=remove",
++              NULL
++      },
++      [1] = {
++              "SWITCH_NAME=headset",
++              "SWITCH_STATE=1",
++              "EVENT=insert",
++              NULL
++      },
++};
++
++static void neo1973kbd_jack_event(struct device *dev, int num)
++{
++      kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, (char **)event_array_jack[!!num]);
++}
++
++
++static void neo1973kbd_debounce_jack(struct work_struct *work)
++{
++      struct neo1973kbd *kbd = container_of(work, struct neo1973kbd, work);
++      unsigned long flags;
++      int loop = 0;
++      int level;
++
++      do {
++              /*
++               * we wait out any multiple interrupt
++               * stuttering in 100ms lumps
++               */
++              do {
++                      kbd->hp_irq_count_in_work = kbd->hp_irq_count;
++                      msleep(100);
++              } while (kbd->hp_irq_count != kbd->hp_irq_count_in_work);
++              /*
++               * no new interrupts on jack for 100ms...
++               * ok we will report it
++               */
++              level = gpio_get_value(kbd->pdev->resource[NEO1973_KEY_JACK].start);
++              input_report_switch(kbd->input, SW_HEADPHONE_INSERT, level);
++              input_sync(kbd->input);
++              neo1973kbd_jack_event(kbd->cdev, level);
++              /*
++               * we go around the outer loop again if we detect that more
++               * interrupts came while we are servicing here.  But we have
++               * to sequence it carefully with interrupts off
++               */
++              local_save_flags(flags);
++              /* no interrupts during this work means we can exit the work */
++              loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work);
++              if (!loop)
++                      kbd->work_in_progress = 0;
++              local_irq_restore(flags);
++              /*
++               * interrupt that comes here will either queue a new work action
++               * since work_in_progress is cleared now, or be dealt with
++               * when we loop.
++               */
++      } while (loop);
++}
++
++
++static irqreturn_t neo1973kbd_headphone_irq(int irq, void *dev_id)
++{
++      struct neo1973kbd *neo1973kbd_data = dev_id;
++
++      /*
++       * this interrupt is prone to bouncing and userspace doesn't like
++       * to have to deal with that kind of thing.  So we do not accept
++       * that a jack interrupt is equal to a jack event.  Instead we fire
++       * some work on the first interrupt, and it hangs about in 100ms units
++       * until no more interrupts come.  Then it accepts the state it finds
++       * for jack insert and reports it once
++       */
++
++      neo1973kbd_data->hp_irq_count++;
++      /*
++       * the first interrupt we see for a while, we fire the work item
++       * and record the interrupt count when we did that.  If more interrupts
++       * come in the meanwhile, we can tell by the difference in that
++       * stored count and hp_irq_count which increments every interrupt
++       */
++      if (!neo1973kbd_data->work_in_progress) {
++              neo1973kbd_data->jack_irq = irq;
++              neo1973kbd_data->hp_irq_count_in_work =
++                                              neo1973kbd_data->hp_irq_count;
++              if (!schedule_work(&neo1973kbd_data->work))
++                      printk(KERN_ERR
++                              "Unable to schedule headphone debounce\n");
++              else
++                      neo1973kbd_data->work_in_progress = 1;
++      }
++
++      return IRQ_HANDLED;
++}
++
++#ifdef CONFIG_PM
++static int neo1973kbd_suspend(struct platform_device *dev, pm_message_t state)
++{
++      if (machine_is_neo1973_gta02()) {
++              disable_irq(keys[NEO1973_KEY_AUX].irq);
++              del_timer_sync(&aux_key_timer);
++      }
++      return 0;
++}
++
++static int neo1973kbd_resume(struct platform_device *dev)
++{
++      if (machine_is_neo1973_gta02())
++              enable_irq(keys[NEO1973_KEY_AUX].irq);
++
++      return 0;
++}
++#else
++#define neo1973kbd_suspend    NULL
++#define neo1973kbd_resume     NULL
++#endif
++
++static ssize_t neo1973kbd_switch_name_show(struct device *dev,
++                      struct device_attribute *attr, char *buf)
++{
++      return sprintf(buf, "%s\n", "neo1973 Headset Jack");
++}
++
++static ssize_t neo1973kbd_switch_state_show(struct device *dev,
++                      struct device_attribute *attr, char *buf)
++{
++      struct neo1973kbd *kbd = dev_get_drvdata(dev);
++      return sprintf(buf, "%d\n",
++                 gpio_get_value(kbd->pdev->resource[NEO1973_KEY_JACK].start));
++}
++
++static DEVICE_ATTR(name, S_IRUGO , neo1973kbd_switch_name_show, NULL);
++static DEVICE_ATTR(state, S_IRUGO , neo1973kbd_switch_state_show, NULL);
++
++static int neo1973kbd_probe(struct platform_device *pdev)
++{
++      struct neo1973kbd *neo1973kbd;
++      struct input_dev *input_dev;
++      int rc;
++      int irq;
++      int n;
++
++      neo1973kbd = kzalloc(sizeof(struct neo1973kbd), GFP_KERNEL);
++      input_dev = input_allocate_device();
++      if (!neo1973kbd || !input_dev) {
++              kfree(neo1973kbd);
++              input_free_device(input_dev);
++              return -ENOMEM;
++      }
++
++      neo1973kbd->pdev = pdev;
++      timer_kbd = neo1973kbd;
++
++      if (pdev->resource[0].flags != 0)
++              return -EINVAL;
++
++      platform_set_drvdata(pdev, neo1973kbd);
++
++      neo1973kbd->input = input_dev;
++
++      INIT_WORK(&neo1973kbd->work, neo1973kbd_debounce_jack);
++
++      input_dev->name = "Neo1973 Buttons";
++      input_dev->phys = "neo1973kbd/input0";
++      input_dev->id.bustype = BUS_HOST;
++      input_dev->id.vendor = 0x0001;
++      input_dev->id.product = 0x0001;
++      input_dev->id.version = 0x0100;
++      input_dev->dev.parent = &pdev->dev;
++
++      input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW);
++      set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
++      set_bit(KEY_PHONE, input_dev->keybit);
++      set_bit(KEY_PAUSE, input_dev->keybit);
++
++      rc = input_register_device(neo1973kbd->input);
++      if (rc)
++              goto out_register;
++
++      neo1973kbd->cdev = device_create(neo1973kbd_switch_class,
++                                        &pdev->dev, 0, neo1973kbd, "headset");
++      if (unlikely(IS_ERR(neo1973kbd->cdev))) {
++              rc = PTR_ERR(neo1973kbd->cdev);
++              goto out_device_create;
++      }
++
++      rc = device_create_file(neo1973kbd->cdev, &dev_attr_name);
++      if(rc)
++              goto out_device_create_file;
++
++      rc = device_create_file(neo1973kbd->cdev, &dev_attr_state);
++      if(rc)
++              goto out_device_create_file;
++
++      /* register GPIO IRQs */
++      for(n = 0; n < min(pdev->num_resources, ARRAY_SIZE(keys)); n++) {
++
++              if (!pdev->resource[0].start)
++                      continue;
++
++              irq = gpio_to_irq(pdev->resource[n].start);
++              if (irq < 0)
++                      continue;
++
++              if (request_irq(irq, keys[n].isr, IRQF_DISABLED |
++                              IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++                              keys[n].name, neo1973kbd)) {
++                      dev_err(&pdev->dev, "Can't get IRQ %u\n", irq);
++
++                      /* unwind any irq registrations and fail */
++
++                      while (n > 0) {
++                              n--;
++                              free_irq(gpio_to_irq(pdev->resource[n].start),
++                                                                  neo1973kbd);
++                      }
++                      goto out_device_create_file;
++              }
++
++              keys[n].irq = irq;
++      }
++
++      /*
++       * GTA01 revisions before Bv4 can't be resumed by the PMU, so we use
++       * resume by AUX.
++       */
++      if (machine_is_neo1973_gta01())
++              enable_irq_wake(keys[NEO1973_KEY_AUX].irq);
++
++      enable_irq_wake(keys[NEO1973_KEY_JACK].irq);
++
++      return 0;
++
++out_device_create_file:
++      device_unregister(neo1973kbd->cdev);
++out_device_create:
++      input_unregister_device(neo1973kbd->input);
++out_register:
++      input_free_device(neo1973kbd->input);
++      platform_set_drvdata(pdev, NULL);
++      kfree(neo1973kbd);
++
++      return -ENODEV;
++}
++
++static int neo1973kbd_remove(struct platform_device *pdev)
++{
++      struct neo1973kbd *neo1973kbd = platform_get_drvdata(pdev);
++
++      free_irq(gpio_to_irq(pdev->resource[2].start), neo1973kbd);
++      free_irq(gpio_to_irq(pdev->resource[1].start), neo1973kbd);
++      free_irq(gpio_to_irq(pdev->resource[0].start), neo1973kbd);
++
++      device_unregister(neo1973kbd->cdev);
++      input_unregister_device(neo1973kbd->input);
++      input_free_device(neo1973kbd->input);
++      platform_set_drvdata(pdev, NULL);
++      kfree(neo1973kbd);
++
++      return 0;
++}
++
++static struct platform_driver neo1973kbd_driver = {
++      .probe          = neo1973kbd_probe,
++      .remove         = neo1973kbd_remove,
++      .suspend        = neo1973kbd_suspend,
++      .resume         = neo1973kbd_resume,
++      .driver         = {
++              .name   = "neo1973-button",
++      },
++};
++
++static int __devinit neo1973kbd_init(void)
++{
++      neo1973kbd_switch_class = class_create(THIS_MODULE, "switch");
++      if (IS_ERR(neo1973kbd_switch_class))
++              return PTR_ERR(neo1973kbd_switch_class);
++      return platform_driver_register(&neo1973kbd_driver);
++}
++
++static void __exit neo1973kbd_exit(void)
++{
++      platform_driver_unregister(&neo1973kbd_driver);
++      class_destroy(neo1973kbd_switch_class);
++}
++
++module_init(neo1973kbd_init);
++module_exit(neo1973kbd_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("FIC Neo1973 buttons input driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/keyboard/qt2410kbd.c linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/qt2410kbd.c
+--- linux-2.6.29-rc3.owrt/drivers/input/keyboard/qt2410kbd.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/keyboard/qt2410kbd.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,231 @@
++/*
++ * Keyboard driver for Armzone QT2410
++ *
++ * (C) 2006 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++
++#include <mach/hardware.h>
++#include <mach/gta01.h>
++
++struct gta01kbd {
++      struct input_dev *input;
++      unsigned int suspended;
++      unsigned long suspend_jiffies;
++};
++
++static irqreturn_t gta01kbd_interrupt(int irq, void *dev_id)
++{
++      struct gta01kbd *gta01kbd_data = dev_id;
++
++      /* FIXME: use GPIO from platform_dev resources */
++      if (s3c2410_gpio_getpin(S3C2410_GPF0))
++              input_report_key(gta01kbd_data->input, KEY_PHONE, 1);
++      else
++              input_report_key(gta01kbd_data->input, KEY_PHONE, 0);
++
++      input_sync(gta01kbd_data->input);
++
++      return IRQ_HANDLED;
++}
++
++
++#ifdef CONFIG_PM
++static int gta01kbd_suspend(struct platform_device *dev, pm_message_t state)
++{
++      struct gta01kbd *gta01kbd = platform_get_drvdata(dev);
++
++      gta01kbd->suspended = 1;
++
++      return 0;
++}
++
++static int gta01kbd_resume(struct platform_device *dev)
++{
++      struct gta01kbd *gta01kbd = platform_get_drvdata(dev);
++
++      gta01kbd->suspended = 0;
++
++      return 0;
++}
++#else
++#define gta01kbd_suspend      NULL
++#define gta01kbd_resume               NULL
++#endif
++
++static int gta01kbd_probe(struct platform_device *pdev)
++{
++      struct gta01kbd *gta01kbd;
++      struct input_dev *input_dev;
++      int irq_911;
++      int rc = 0;
++
++      gta01kbd = kzalloc(sizeof(struct gta01kbd), GFP_KERNEL);
++      if (!gta01kbd) {
++              rc = -ENOMEM;
++              goto bail;
++      }
++      input_dev = input_allocate_device();
++      if (!gta01kbd || !input_dev) {
++              rc = -ENOMEM;
++              goto bail_free;
++      }
++
++      if (pdev->resource[0].flags != 0) {\
++              rc = -EINVAL;
++              goto bail_free_dev;
++      }
++
++      irq_911 = s3c2410_gpio_getirq(pdev->resource[0].start);
++      if (irq_911 < 0) {
++              rc = -EINVAL;
++              goto bail_free_dev;
++      }
++
++      platform_set_drvdata(pdev, gta01kbd);
++
++      gta01kbd->input = input_dev;
++
++#if 0
++      spin_lock_init(&gta01kbd->lock);
++      /* Init Keyboard rescan timer */
++      init_timer(&corgikbd->timer);
++      corgikbd->timer.function = corgikbd_timer_callback;
++      corgikbd->timer.data = (unsigned long) corgikbd;
++
++      /* Init Hinge Timer */
++      init_timer(&corgikbd->htimer);
++      corgikbd->htimer.function = corgikbd_hinge_timer;
++      corgikbd->htimer.data = (unsigned long) corgikbd;
++
++      corgikbd->suspend_jiffies=jiffies;
++
++      memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode));
++#endif
++
++      input_dev->name = "QT2410 Buttons";
++      input_dev->phys = "qt2410kbd/input0";
++      input_dev->id.bustype = BUS_HOST;
++      input_dev->id.vendor = 0x0001;
++      input_dev->id.product = 0x0001;
++      input_dev->id.version = 0x0100;
++
++      input_dev->evbit[0] = BIT(EV_KEY);
++#if 0
++      input_dev->keycode = gta01kbd->keycode;
++      input_dev->keycodesize = sizeof(unsigned char);
++      input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode);
++
++      for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
++              set_bit(corgikbd->keycode[i], input_dev->keybit);
++      clear_bit(0, input_dev->keybit);
++      set_bit(SW_LID, input_dev->swbit);
++      set_bit(SW_TABLET_MODE, input_dev->swbit);
++      set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
++#endif
++
++      rc = input_register_device(gta01kbd->input);
++      if (rc)
++              goto bail_free_dev;
++
++      s3c2410_gpio_cfgpin(S3C2410_GPF0, S3C2410_GPF0_EINT0);
++      if (request_irq(irq_911, gta01kbd_interrupt,
++                      IRQF_DISABLED | IRQF_TRIGGER_RISING |
++                      IRQF_TRIGGER_FALLING, "qt2410kbd_eint0", gta01kbd))
++              printk(KERN_WARNING "gta01kbd: Can't get IRQ\n");
++      enable_irq_wake(irq_911);
++
++      /* FIXME: headphone insert */
++
++#if 0
++      mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
++
++      /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
++      for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
++              pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
++              if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt,
++                              SA_INTERRUPT | SA_TRIGGER_RISING,
++                              "corgikbd", corgikbd))
++                      printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i);
++      }
++
++      /* Set Strobe lines as outputs - set high */
++      for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
++              pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
++
++      /* Setup the headphone jack as an input */
++      pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
++#endif
++
++      return 0;
++
++bail_free_dev:
++      input_free_device(input_dev);
++bail_free:
++      kfree(gta01kbd);
++bail:
++      return rc;
++}
++
++static int gta01kbd_remove(struct platform_device *pdev)
++{
++      struct gta01kbd *gta01kbd = platform_get_drvdata(pdev);
++
++      free_irq(s3c2410_gpio_getirq(pdev->resource[0].start), gta01kbd);
++#if 0
++      int i;
++
++      for (i = 0; i < CORGI_KEY_SENSE_NUM; i++)
++              free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd);
++
++      del_timer_sync(&corgikbd->htimer);
++      del_timer_sync(&corgikbd->timer);
++#endif
++      input_unregister_device(gta01kbd->input);
++
++      kfree(gta01kbd);
++
++      return 0;
++}
++
++static struct platform_driver gta01kbd_driver = {
++      .probe          = gta01kbd_probe,
++      .remove         = gta01kbd_remove,
++      .suspend        = gta01kbd_suspend,
++      .resume         = gta01kbd_resume,
++      .driver         = {
++              .name   = "qt2410-button",
++      },
++};
++
++static int __devinit gta01kbd_init(void)
++{
++      return platform_driver_register(&gta01kbd_driver);
++}
++
++static void __exit gta01kbd_exit(void)
++{
++      platform_driver_unregister(&gta01kbd_driver);
++}
++
++module_init(gta01kbd_init);
++module_exit(gta01kbd_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Armzone QT2410 Buttons Driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/misc/Kconfig linux-2.6.29-rc3.owrt.om/drivers/input/misc/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/input/misc/Kconfig   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/misc/Kconfig        2009-05-10 22:27:59.000000000 +0200
+@@ -220,12 +220,26 @@
+         Say Y here if you want to support the built-in real time clock
+         of the HP SDC controller.
++config INPUT_LIS302DL
++      tristate "STmicro LIS302DL 3-axis accelerometer"
++      depends on SPI_MASTER
++      help
++        SPI driver for the STmicro LIS302DL 3-axis accelerometer.
++
++        The userspece interface is a 3-axis (X/Y/Z) relative movement
++        Linux input device, reporting REL_[XYZ] events.
++
+ config INPUT_PCF50633_PMU
+       tristate "PCF50633 PMU events"
+       depends on MFD_PCF50633
+       help
+-       Say Y to include support for delivering  PMU events via  input
+-       layer on NXP PCF50633.
++       Say Y to include support for input events on NXP PCF50633.
++
++config INPUT_PCF50606_PMU
++      tristate "PCF50606 PMU events"
++      depends on MFD_PCF50606
++      help
++       Say Y to include support for input events on NXP PCF50606.
+ config INPUT_GPIO_BUTTONS
+       tristate "Polled GPIO buttons interface"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/misc/lis302dl.c linux-2.6.29-rc3.owrt.om/drivers/input/misc/lis302dl.c
+--- linux-2.6.29-rc3.owrt/drivers/input/misc/lis302dl.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/misc/lis302dl.c     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,958 @@
++/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
++ *
++ * Copyright (C) 2007-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *         converted to private bitbang by:
++ *         Andy Green <andy@openmoko.com>
++ *         ability to set acceleration threshold added by:
++ *         Simon Kagstrom <simon.kagstrom@gmail.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * TODO
++ *    * statistics for overflow events
++ *    * configuration interface (sysfs) for
++ *            * enable/disable x/y/z axis data ready
++ *            * enable/disable resume from freee fall / click
++ *            * free fall / click parameters
++ *            * high pass filter parameters
++ */
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/sysfs.h>
++#include <linux/spi/spi.h>
++
++#include <linux/lis302dl.h>
++
++/* Utility functions */
++static u8 __reg_read(struct lis302dl_info *lis, u8 reg)
++{
++      struct spi_message msg;
++      struct spi_transfer t;
++      u8 data[2] = {0xc0 | reg};
++      int rc;
++
++      spi_message_init(&msg);
++      memset(&t, 0, sizeof t);
++      t.len = 2;
++      spi_message_add_tail(&t, &msg);
++      t.tx_buf = &data[0];
++      t.rx_buf = &data[0];
++
++      /* Should complete without blocking */
++      rc = spi_non_blocking_transfer(lis->spi, &msg);
++      if (rc < 0) {
++              dev_err(lis->dev, "Error reading register\n");
++              return rc;
++      }
++
++      return data[1];
++}
++
++static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val)
++{     
++      struct spi_message msg;
++      struct spi_transfer t;
++      u8 data[2] = {reg, val};
++
++      spi_message_init(&msg);
++      memset(&t, 0, sizeof t);
++      t.len = 2;
++      spi_message_add_tail(&t, &msg);
++      t.tx_buf = &data[0];
++      t.rx_buf = &data[0];
++
++      /* Completes without blocking */
++      if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
++              dev_err(lis->dev, "Error writing register\n");
++}
++
++static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
++              u8 val)
++{
++      u_int8_t tmp;
++
++      val &= mask;
++
++      tmp = __reg_read(lis, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      __reg_write(lis, reg, tmp);
++}
++
++static int __ms_to_duration(struct lis302dl_info *lis, int ms)
++{
++      /* If we have 400 ms sampling rate, the stepping is 2.5 ms,
++       * on 100 ms the stepping is 10ms */
++      if (lis->flags & LIS302DL_F_DR)
++              return min((ms * 10) / 25, 637);
++
++      return min(ms / 10, 2550);
++}
++
++static int __duration_to_ms(struct lis302dl_info *lis, int duration)
++{
++      if (lis->flags & LIS302DL_F_DR)
++              return (duration * 25) / 10;
++
++      return duration * 10;
++}
++
++static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg)
++{
++      /* If FS is set each bit is 71mg, otherwise 18mg. The THS register
++       * has 7 bits for the threshold value */
++      if (lis->flags & LIS302DL_F_FS)
++              return min(mg / 71, 127);
++
++      return min(mg / 18, 127);
++}
++
++static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold)
++{
++      if (lis->flags & LIS302DL_F_FS)
++              return threshold * 71;
++
++      return threshold * 18;
++}
++
++/* interrupt handling related */
++
++enum lis302dl_intmode {
++      LIS302DL_INTMODE_GND            = 0x00,
++      LIS302DL_INTMODE_FF_WU_1        = 0x01,
++      LIS302DL_INTMODE_FF_WU_2        = 0x02,
++      LIS302DL_INTMODE_FF_WU_12       = 0x03,
++      LIS302DL_INTMODE_DATA_READY     = 0x04,
++      LIS302DL_INTMODE_CLICK          = 0x07,
++};
++
++static void __lis302dl_int_mode(struct device *dev, int int_pin,
++                            enum lis302dl_intmode mode)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      switch (int_pin) {
++      case 1:
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
++              break;
++      case 2:
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
++              break;
++      default:
++              BUG();
++      }
++}
++
++static void __enable_wakeup(struct lis302dl_info *lis)
++{
++      __reg_write(lis, LIS302DL_REG_CTRL1, 0);
++
++      /* First zero to get to a known state */
++      __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
++                      LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
++                      LIS302DL_FFWUCFG_LIR);
++      __reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++                      __mg_to_threshold(lis, lis->wakeup.threshold));
++      __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++                      __ms_to_duration(lis, lis->wakeup.duration));
++
++      /* Route the interrupt for wakeup */
++      __lis302dl_int_mode(lis->dev, 1,
++                      LIS302DL_INTMODE_FF_WU_1);
++
++      __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++      __reg_read(lis, LIS302DL_REG_OUT_X);
++      __reg_read(lis, LIS302DL_REG_OUT_Y);
++      __reg_read(lis, LIS302DL_REG_OUT_Z);
++      __reg_read(lis, LIS302DL_REG_STATUS);
++      __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++      __reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++      __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
++}
++
++static void __enable_data_collection(struct lis302dl_info *lis)
++{
++      u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
++                       LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
++
++      /* make sure we're powered up and generate data ready */
++      __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
++
++      /* If the threshold is zero, let the device generated an interrupt
++       * on each datum */
++      if (lis->threshold == 0) {
++              __reg_write(lis, LIS302DL_REG_CTRL2, 0);
++              __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
++              __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
++      } else {
++              __reg_write(lis, LIS302DL_REG_CTRL2,
++                              LIS302DL_CTRL2_HPFF1);
++              __reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++                              __mg_to_threshold(lis, lis->threshold));
++              __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++                              __ms_to_duration(lis, lis->duration));
++
++              /* Clear the HP filter "starting point" */
++              __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++              __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
++                              LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
++                              LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
++              __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
++              __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
++      }
++}
++
++#if 0
++static void _report_btn_single(struct input_dev *inp, int btn)
++{
++      input_report_key(inp, btn, 1);
++      input_sync(inp);
++      input_report_key(inp, btn, 0);
++}
++
++static void _report_btn_double(struct input_dev *inp, int btn)
++{
++      input_report_key(inp, btn, 1);
++      input_sync(inp);
++      input_report_key(inp, btn, 0);
++      input_sync(inp);
++      input_report_key(inp, btn, 1);
++      input_sync(inp);
++      input_report_key(inp, btn, 0);
++}
++#endif
++
++
++static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
++{
++      u8 data[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 2] = {0xC0 | LIS302DL_REG_STATUS};
++      u8 *read = data + 1;
++      unsigned long flags;
++      int mg_per_sample = __threshold_to_mg(lis, 1);
++      struct spi_message msg;
++      struct spi_transfer t;
++
++      spi_message_init(&msg);
++      memset(&t, 0, sizeof t);
++      t.len = sizeof(data);
++      spi_message_add_tail(&t, &msg);
++      t.tx_buf = &data[0];
++      t.rx_buf = &data[0];
++
++      /* grab the set of register containing status and XYZ data */
++
++      local_irq_save(flags);
++
++      /* Should complete without blocking */
++      if (spi_non_blocking_transfer(lis->spi, &msg) < 0) 
++              dev_err(lis->dev, "Error reading registers\n");
++
++      local_irq_restore(flags);
++
++      /*
++       * at the minute the test below fails 50% of the time due to
++       * a problem with level interrupts causing ISRs to get called twice.
++       * This is a workaround for that, but actually this test is still
++       * valid and the information can be used for overrrun stats.
++       */
++
++      /* has any kind of overrun been observed by the lis302dl? */
++      if (read[0] & (LIS302DL_STATUS_XOR |
++                     LIS302DL_STATUS_YOR |
++                     LIS302DL_STATUS_ZOR))
++              lis->overruns++;
++
++      /* we have a valid sample set? */
++      if (read[0] & LIS302DL_STATUS_XYZDA) {
++              input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
++                          (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
++              input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
++                          (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
++              input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
++                          (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
++
++              input_sync(lis->input_dev);
++      }
++
++      if (lis->threshold)
++              /* acknowledge the wakeup source */
++              __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++}
++
++static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
++{
++      struct lis302dl_info *lis = _lis;
++
++      lis302dl_bitbang_read_sample(lis);
++      return IRQ_HANDLED;
++}
++
++/* sysfs */
++
++static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
++                       char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      return sprintf(buf, "%u\n", lis->overruns);
++}
++
++static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
++
++static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
++                       char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      u8 ctrl1;
++      unsigned long flags;
++
++      local_irq_save(flags);
++      ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++      local_irq_restore(flags);
++
++      return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
++}
++
++static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      if (!strcmp(buf, "400\n")) {
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++                               LIS302DL_CTRL1_DR);
++              lis->flags |= LIS302DL_F_DR;
++      } else {
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++                              0);
++              lis->flags &= ~LIS302DL_F_DR;
++      }
++      local_irq_restore(flags);
++
++      return count;
++}
++
++static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
++
++static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
++                        char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      u_int8_t ctrl1;
++      unsigned long flags;
++
++      local_irq_save(flags);
++      ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++      local_irq_restore(flags);
++
++      return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
++}
++
++static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
++                       const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      if (!strcmp(buf, "9.2\n")) {
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++                               LIS302DL_CTRL1_FS);
++              lis->flags |= LIS302DL_F_FS;
++      } else {
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++                              0);
++              lis->flags &= ~LIS302DL_F_FS;
++      }
++
++      if (lis->flags & LIS302DL_F_INPUT_OPEN)
++              __enable_data_collection(lis);
++
++      local_irq_restore(flags);
++
++      return count;
++}
++
++static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
++
++static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
++               char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      /* Display the device view of the threshold setting */
++      return sprintf(buf, "%d\n", __threshold_to_mg(lis,
++                      __mg_to_threshold(lis, lis->threshold)));
++}
++
++static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
++               const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned int val;
++
++      if (sscanf(buf, "%u\n", &val) != 1)
++              return -EINVAL;
++      /* 8g is the maximum if FS is 1 */
++      if (val > 8000)
++              return -ERANGE;
++
++      /* Set the threshold and write it out if the device is used */
++      lis->threshold = val;
++
++      if (lis->flags & LIS302DL_F_INPUT_OPEN) {
++              unsigned long flags;
++
++              local_irq_save(flags);
++              __enable_data_collection(lis);
++              local_irq_restore(flags);
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
++
++static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
++               char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      return sprintf(buf, "%d\n", __duration_to_ms(lis,
++                      __ms_to_duration(lis, lis->duration)));
++}
++
++static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
++               const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned int val;
++
++      if (sscanf(buf, "%u\n", &val) != 1)
++              return -EINVAL;
++      if (val > 2550)
++              return -ERANGE;
++
++      lis->duration = val;
++      if (lis->flags & LIS302DL_F_INPUT_OPEN)
++              __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++                              __ms_to_duration(lis, lis->duration));
++
++      return count;
++}
++
++static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
++
++static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
++                                                                    char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      int n = 0;
++      u8 reg[0x40];
++      char *end = buf;
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      for (n = 0; n < sizeof(reg); n++)
++              reg[n] = __reg_read(lis, n);
++
++      local_irq_restore(flags);
++
++      for (n = 0; n < sizeof(reg); n += 16) {
++              hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
++              end += strlen(end);
++              *end++ = '\n';
++              *end++ = '\0';
++      }
++
++      return end - buf;
++}
++static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
++
++/* Configure freefall/wakeup interrupts */
++static ssize_t set_wakeup_threshold(struct device *dev,
++              struct device_attribute *attr, const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned int threshold;
++
++      if (sscanf(buf, "%u\n", &threshold) != 1)
++              return -EINVAL;
++
++      if (threshold > 8000)
++              return -ERANGE;
++
++      /* Zero turns the feature off */
++      if (threshold == 0) {
++              if (lis->flags & LIS302DL_F_IRQ_WAKE) {
++                      disable_irq_wake(lis->pdata->interrupt);
++                      lis->flags &= ~LIS302DL_F_IRQ_WAKE;
++              }
++
++              return count;
++      }
++
++      lis->wakeup.threshold = threshold;
++
++      if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
++              enable_irq_wake(lis->pdata->interrupt);
++              lis->flags |= LIS302DL_F_IRQ_WAKE;
++      }
++
++      return count;
++}
++
++static ssize_t show_wakeup_threshold(struct device *dev,
++              struct device_attribute *attr, char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      /* All events off? */
++      if (lis->wakeup.threshold == 0)
++              return sprintf(buf, "off\n");
++
++      return sprintf(buf, "%u\n", lis->wakeup.threshold);
++}
++
++static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
++              set_wakeup_threshold);
++
++static ssize_t set_wakeup_duration(struct device *dev,
++              struct device_attribute *attr, const char *buf, size_t count)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++      unsigned int duration;
++
++      if (sscanf(buf, "%u\n", &duration) != 1)
++              return -EINVAL;
++
++      if (duration > 2550)
++              return -ERANGE;
++
++      lis->wakeup.duration = duration;
++
++      return count;
++}
++
++static ssize_t show_wakeup_duration(struct device *dev,
++              struct device_attribute *attr, char *buf)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++      return sprintf(buf, "%u\n", lis->wakeup.duration);
++}
++
++static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
++              set_wakeup_duration);
++
++static struct attribute *lis302dl_sysfs_entries[] = {
++      &dev_attr_sample_rate.attr,
++      &dev_attr_full_scale.attr,
++      &dev_attr_threshold.attr,
++      &dev_attr_duration.attr,
++      &dev_attr_dump.attr,
++      &dev_attr_wakeup_threshold.attr,
++      &dev_attr_wakeup_duration.attr,
++      &dev_attr_overruns.attr,
++      NULL
++};
++
++static struct attribute_group lis302dl_attr_group = {
++      .name   = NULL,
++      .attrs  = lis302dl_sysfs_entries,
++};
++
++/* input device handling and driver core interaction */
++
++static int lis302dl_input_open(struct input_dev *inp)
++{
++      struct lis302dl_info *lis = input_get_drvdata(inp);
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      __enable_data_collection(lis);
++      lis->flags |= LIS302DL_F_INPUT_OPEN;
++
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++static void lis302dl_input_close(struct input_dev *inp)
++{
++      struct lis302dl_info *lis = input_get_drvdata(inp);
++      u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
++                       LIS302DL_CTRL1_Zen;
++      unsigned long flags;
++
++      local_irq_save(flags);
++
++      /* since the input core already serializes access and makes sure we
++       * only see close() for the close of the last user, we can safely
++       * disable the data ready events */
++      __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
++      lis->flags &= ~LIS302DL_F_INPUT_OPEN;
++
++      /* however, don't power down the whole device if still needed */
++      if (!(lis->flags & LIS302DL_F_WUP_FF ||
++            lis->flags & LIS302DL_F_WUP_CLICK)) {
++              __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
++                               0x00);
++      }
++      local_irq_restore(flags);
++}
++
++/* get the device to reload its coefficients from EEPROM and wait for it
++ * to complete
++ */
++
++static int __lis302dl_reset_device(struct lis302dl_info *lis)
++{
++      int timeout = 10;
++
++      __reg_write(lis, LIS302DL_REG_CTRL2,
++                      LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
++
++      while ((__reg_read(lis, LIS302DL_REG_CTRL2)
++                      & LIS302DL_CTRL2_BOOT) && (timeout--))
++              mdelay(1);
++
++      return !!(timeout < 0);
++}
++
++static int __devinit lis302dl_probe(struct spi_device *spi)
++{
++      int rc;
++      struct lis302dl_info *lis;
++      u_int8_t wai;
++      unsigned long flags;
++      struct lis302dl_platform_data *pdata = spi->dev.platform_data;
++
++      spi->mode = SPI_MODE_3;
++      rc = spi_setup(spi);
++      if (rc < 0) {
++              dev_err(&spi->dev, "spi_setup failed\n");
++              return rc;
++      }
++
++      lis = kzalloc(sizeof(*lis), GFP_KERNEL);
++      if (!lis)
++              return -ENOMEM;
++
++      lis->dev = &spi->dev;
++      lis->spi = spi;
++
++      dev_set_drvdata(lis->dev, lis);
++
++      lis->pdata = pdata;
++
++      rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
++      if (rc) {
++              dev_err(lis->dev, "error creating sysfs group\n");
++              goto bail_free_lis;
++      }
++
++      /* initialize input layer details */
++      lis->input_dev = input_allocate_device();
++      if (!lis->input_dev) {
++              dev_err(lis->dev, "Unable to allocate input device\n");
++              goto bail_sysfs;
++      }
++
++      input_set_drvdata(lis->input_dev, lis);
++      lis->input_dev->name = pdata->name;
++       /* SPI Bus not defined as a valid bus for input subsystem*/
++      lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
++      lis->input_dev->open = lis302dl_input_open;
++      lis->input_dev->close = lis302dl_input_close;
++
++      rc = input_register_device(lis->input_dev);
++      if (rc) {
++              dev_err(lis->dev, "error %d registering input device\n", rc);
++              goto bail_inp_dev;
++      }
++
++      local_irq_save(flags);
++      /* Configure our IO */
++      (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++      wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I);
++      if (wai != LIS302DL_WHO_AM_I_MAGIC) {
++              dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
++              dev_set_drvdata(lis->dev, NULL);
++              rc = -ENODEV;
++              local_irq_restore(flags);
++              goto bail_inp_reg;
++      }
++
++      set_bit(EV_ABS, lis->input_dev->evbit);
++      input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
++      input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
++      input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
++      
++
++      lis->threshold = 0;
++      lis->duration = 0;
++      memset(&lis->wakeup, 0, sizeof(lis->wakeup));
++
++      if (__lis302dl_reset_device(lis))
++              dev_err(lis->dev, "device BOOT reload failed\n");
++
++      /* force us powered */
++      __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
++                      LIS302DL_CTRL1_Xen |
++                      LIS302DL_CTRL1_Yen |
++                      LIS302DL_CTRL1_Zen);
++      mdelay(1);
++
++      __reg_write(lis, LIS302DL_REG_CTRL2, 0);
++      __reg_write(lis, LIS302DL_REG_CTRL3,
++                      LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++      __reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
++      __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
++      __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
++
++      /* start off in powered down mode; we power up when someone opens us */
++      __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
++                      LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
++
++      if (pdata->open_drain)
++              /* switch interrupt to open collector, active-low */
++              __reg_write(lis, LIS302DL_REG_CTRL3,
++                              LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++      else
++              /* push-pull, active-low */
++              __reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
++
++      __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
++      __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
++
++      __reg_read(lis, LIS302DL_REG_STATUS);
++      __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++      __reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++      __reg_read(lis, LIS302DL_REG_CLICK_SRC);
++      local_irq_restore(flags);
++
++      dev_info(lis->dev, "Found %s\n", pdata->name);
++
++      lis->pdata = pdata;
++
++      set_irq_handler(lis->pdata->interrupt, handle_level_irq);
++
++      rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
++                       IRQF_TRIGGER_LOW, "lis302dl", lis);
++      
++      if (rc < 0) {
++              dev_err(lis->dev, "error requesting IRQ %d\n",
++                      lis->pdata->interrupt);
++              goto bail_inp_reg;
++      }
++      return 0;
++
++bail_inp_reg:
++      input_unregister_device(lis->input_dev);
++bail_inp_dev:
++      input_free_device(lis->input_dev);
++bail_sysfs:
++      sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
++bail_free_lis:
++      kfree(lis);
++      return rc;
++}
++
++static int __devexit lis302dl_remove(struct spi_device *spi)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++      unsigned long flags;
++
++      /* Disable interrupts */
++      if (lis->flags & LIS302DL_F_IRQ_WAKE)
++              disable_irq_wake(lis->pdata->interrupt);
++      free_irq(lis->pdata->interrupt, lis);
++
++      /* Reset and power down the device */
++      local_irq_save(flags);
++      __reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
++      __reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
++      __reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
++      local_irq_restore(flags);
++
++      /* Cleanup resources */
++      sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
++      input_unregister_device(lis->input_dev);
++      if (lis->input_dev)
++              input_free_device(lis->input_dev);
++      dev_set_drvdata(lis->dev, NULL);
++      kfree(lis);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++
++static u8 regs_to_save[] = {
++      LIS302DL_REG_CTRL1,
++      LIS302DL_REG_CTRL2,
++      LIS302DL_REG_CTRL3,
++      LIS302DL_REG_FF_WU_CFG_1,
++      LIS302DL_REG_FF_WU_THS_1,
++      LIS302DL_REG_FF_WU_DURATION_1,
++      LIS302DL_REG_FF_WU_CFG_2,
++      LIS302DL_REG_FF_WU_THS_2,
++      LIS302DL_REG_FF_WU_DURATION_2,
++      LIS302DL_REG_CLICK_CFG,
++      LIS302DL_REG_CLICK_THSY_X,
++      LIS302DL_REG_CLICK_THSZ,
++      LIS302DL_REG_CLICK_TIME_LIMIT,
++      LIS302DL_REG_CLICK_LATENCY,
++      LIS302DL_REG_CLICK_WINDOW,
++
++};
++
++static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++      unsigned long flags;
++      u_int8_t tmp;
++      int n;
++
++      /* determine if we want to wake up from the accel. */
++      if (lis->flags & LIS302DL_F_WUP_CLICK)
++              return 0;
++
++      disable_irq(lis->pdata->interrupt);
++      local_irq_save(flags);
++
++      /*
++       * When we share SPI over multiple sensors, there is a race here
++       * that one or more sensors will lose.  In that case, the shared
++       * SPI bus GPIO will be in sleep mode and partially pulled down.  So
++       * we explicitly put our IO into "wake" mode here before the final
++       * traffic to the sensor.
++       */
++      (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++      /* save registers */
++      for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++              lis->regs[regs_to_save[n]] =
++                      __reg_read(lis, regs_to_save[n]);
++
++      /* power down or enable wakeup */
++
++      if (lis->wakeup.threshold == 0) {
++              tmp = __reg_read(lis, LIS302DL_REG_CTRL1);
++              tmp &= ~LIS302DL_CTRL1_PD;
++              __reg_write(lis, LIS302DL_REG_CTRL1, tmp);
++      } else
++              __enable_wakeup(lis);
++
++      /* place our IO to the device in sleep-compatible states */
++      (lis->pdata->lis302dl_suspend_io)(lis, 0);
++
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++static int lis302dl_resume(struct spi_device *spi)
++{
++      struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++      unsigned long flags;
++      int n;
++
++      if (lis->flags & LIS302DL_F_WUP_CLICK)
++              return 0;
++
++      local_irq_save(flags);
++
++      /* get our IO to the device back in operational states */
++      (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++      /* resume from powerdown first! */
++      __reg_write(lis, LIS302DL_REG_CTRL1,
++                      LIS302DL_CTRL1_PD |
++                      LIS302DL_CTRL1_Xen |
++                      LIS302DL_CTRL1_Yen |
++                      LIS302DL_CTRL1_Zen);
++      mdelay(1);
++
++      if (__lis302dl_reset_device(lis))
++              dev_err(&spi->dev, "device BOOT reload failed\n");
++
++      lis->regs[LIS302DL_REG_CTRL1] |=        LIS302DL_CTRL1_PD |
++                                              LIS302DL_CTRL1_Xen |
++                                              LIS302DL_CTRL1_Yen |
++                                              LIS302DL_CTRL1_Zen;
++
++      /* restore registers after resume */
++      for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++              __reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
++
++      /* if someone had us open, reset the non-wake threshold stuff */
++      if (lis->flags & LIS302DL_F_INPUT_OPEN)
++              __enable_data_collection(lis);
++
++      local_irq_restore(flags);
++      enable_irq(lis->pdata->interrupt);
++
++      return 0;
++}
++#else
++#define lis302dl_suspend      NULL
++#define lis302dl_resume               NULL
++#endif
++
++static struct spi_driver lis302dl_spi_driver = {
++      .driver = {
++              .name = "lis302dl",
++              .owner = THIS_MODULE,
++      },
++
++      .probe  = lis302dl_probe,       
++      .remove = __devexit_p(lis302dl_remove),
++      .suspend = lis302dl_suspend,
++      .resume  = lis302dl_resume,
++};
++
++static int __devinit lis302dl_init(void)
++{
++      return spi_register_driver(&lis302dl_spi_driver);
++}
++
++static void __exit lis302dl_exit(void)
++{
++      spi_unregister_driver(&lis302dl_spi_driver);
++}
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(lis302dl_init);
++module_exit(lis302dl_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/misc/Makefile linux-2.6.29-rc3.owrt.om/drivers/input/misc/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/input/misc/Makefile  2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/misc/Makefile       2009-05-10 22:29:16.000000000 +0200
+@@ -21,5 +21,7 @@
+ obj-$(CONFIG_INPUT_UINPUT)            += uinput.o
+ obj-$(CONFIG_INPUT_APANEL)            += apanel.o
+ obj-$(CONFIG_INPUT_SGI_BTNS)          += sgi_btns.o
++obj-$(CONFIG_INPUT_LIS302DL)          += lis302dl.o
+ obj-$(CONFIG_INPUT_PCF50633_PMU)      += pcf50633-input.o
++obj-$(CONFIG_INPUT_PCF50606_PMU)      += pcf50606-input.o
+ obj-$(CONFIG_INPUT_GPIO_BUTTONS)      += gpio_buttons.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/misc/pcf50606-input.c linux-2.6.29-rc3.owrt.om/drivers/input/misc/pcf50606-input.c
+--- linux-2.6.29-rc3.owrt/drivers/input/misc/pcf50606-input.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/misc/pcf50606-input.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,140 @@
++/* Philips PCF50606 Input Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Matt Hsu, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++#define PCF50606_OOCS_ONKEY           0x01
++#define PCF50606_OOCS_EXTON           0x02
++
++#define PCF50606_OOCC2_ONKEYDB_NONE   0x00
++#define PCF50606_OOCC2_ONKEYDB_14ms   0x01
++#define PCF50606_OOCC2_ONKEYDB_62ms   0x02
++#define PCF50606_OOCC2_ONKEYDB_500ms  0x03
++#define PCF50606_OOCC2_EXTONDB_NONE   0x00
++#define PCF50606_OOCC2_EXTONDB_14ms   0x04
++#define PCF50606_OOCC2_EXTONDB_62ms   0x08
++#define PCF50606_OOCC2_EXTONDB_500ms  0x0c
++
++#define PCF50606_REG_OOCS     0x01
++
++struct pcf50606_input {
++      struct pcf50606 *pcf;
++      struct input_dev *input_dev;
++};
++
++static void
++pcf50606_input_irq(int irq, void *data)
++{
++      struct pcf50606_input *input;
++      int onkey_released;
++
++      input = data;
++      onkey_released = pcf50606_reg_read(input->pcf, PCF50606_REG_OOCS) &
++                                              PCF50606_OOCS_ONKEY;
++
++      if (irq == PCF50606_IRQ_ONKEYF && !onkey_released)
++              input_report_key(input->input_dev, KEY_POWER, 1);
++      else if (irq == PCF50606_IRQ_ONKEYR && onkey_released)
++              input_report_key(input->input_dev, KEY_POWER, 0);
++
++      input_sync(input->input_dev);
++}
++
++static int __devinit pcf50606_input_probe(struct platform_device *pdev)
++{
++      struct pcf50606_input *input;
++      struct pcf50606_subdev_pdata *pdata = pdev->dev.platform_data;
++      struct input_dev *input_dev;
++      int ret;
++
++
++      input = kzalloc(sizeof(*input), GFP_KERNEL);
++      if (!input)
++              return -ENOMEM;
++
++      input_dev = input_allocate_device();
++      if (!input_dev) {
++              kfree(input);
++              return -ENOMEM;
++      }
++
++      platform_set_drvdata(pdev, input);
++      input->pcf = pdata->pcf;
++      input->input_dev = input_dev;
++
++      input_dev->name = "PCF50606 PMU events";
++      input_dev->id.bustype = BUS_I2C;
++      input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
++      set_bit(KEY_POWER, input_dev->keybit);
++
++      ret = input_register_device(input_dev);
++      if (ret) {
++              input_free_device(input_dev);
++              kfree(input);
++              return ret;
++      }
++      pcf50606_register_irq(pdata->pcf, PCF50606_IRQ_ONKEYR,
++                              pcf50606_input_irq, input);
++      pcf50606_register_irq(pdata->pcf, PCF50606_IRQ_ONKEYF,
++                              pcf50606_input_irq, input);
++
++      return 0;
++}
++
++static int __devexit pcf50606_input_remove(struct platform_device *pdev)
++{
++      struct pcf50606_input *input  = platform_get_drvdata(pdev);
++
++      input_unregister_device(input->input_dev);
++      pcf50606_free_irq(input->pcf, PCF50606_IRQ_ONKEYR);
++      pcf50606_free_irq(input->pcf, PCF50606_IRQ_ONKEYF);
++
++      kfree(input);
++
++      return 0;
++}
++
++static struct platform_driver pcf50606_input_driver = {
++      .driver = {
++              .name = "pcf50606-input",
++      },
++      .probe = pcf50606_input_probe,
++      .remove = __devexit_p(pcf50606_input_remove),
++};
++
++static int __init pcf50606_input_init(void)
++{
++      return platform_driver_register(&pcf50606_input_driver);
++}
++module_init(pcf50606_input_init);
++
++static void __exit pcf50606_input_exit(void)
++{
++      platform_driver_unregister(&pcf50606_input_driver);
++}
++module_exit(pcf50606_input_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 input driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-input");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/mousedev.c linux-2.6.29-rc3.owrt.om/drivers/input/mousedev.c
+--- linux-2.6.29-rc3.owrt/drivers/input/mousedev.c     2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/mousedev.c  2009-05-10 22:27:59.000000000 +0200
+@@ -1015,6 +1015,7 @@
+               .evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_REL) },
+               .relbit = { BIT_MASK(REL_WHEEL) },
+       },      /* A separate scrollwheel */
++#if 0
+       {
+               .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+                               INPUT_DEVICE_ID_MATCH_KEYBIT |
+@@ -1024,6 +1025,7 @@
+               .absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) },
+       },      /* A tablet like device, at least touch detection,
+                  two absolute axes */
++#endif
+       {
+               .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+                               INPUT_DEVICE_ID_MATCH_KEYBIT |
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/Kconfig linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/Kconfig    2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/Kconfig 2009-05-10 22:27:59.000000000 +0200
+@@ -11,6 +11,54 @@
+ if INPUT_TOUCHSCREEN
++menuconfig TOUCHSCREEN_FILTER
++      boolean "Touchscreen Filtering"
++      depends on INPUT_TOUCHSCREEN
++      select TOUCHSCREEN_FILTER_GROUP
++      select TOUCHSCREEN_FILTER_MEDIAN
++      select TOUCHSCREEN_FILTER_MEAN
++      select TOUCHSCREEN_FILTER_LINEAR
++      help
++        Select this to include kernel touchscreen filter support.  The filters
++        can be combined in any order in your machine init and the parameters
++        for them can also be set there.
++
++if TOUCHSCREEN_FILTER
++
++config TOUCHSCREEN_FILTER_GROUP
++      bool "Group Touchscreen Filter"
++      depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++      default Y
++      help
++        Say Y here if you want to use the Group touchscreen filter, it
++        avoids using atypical samples.
++
++config TOUCHSCREEN_FILTER_MEDIAN
++      bool "Median Average Touchscreen Filter"
++      depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++      default Y
++      help
++        Say Y here if you want to use the Median touchscreen filter, it's
++        highly effective if you data is noisy with occasional excursions.
++
++config TOUCHSCREEN_FILTER_MEAN
++      bool "Mean Average Touchscreen Filter"
++      depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++      default Y
++      help
++        Say Y here if you want to use the Mean touchscreen filter, it
++        can further improve decent quality data by removing jitter
++
++config TOUCHSCREEN_FILTER_LINEAR
++      bool "Linear Touchscreen Filter"
++      depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++      default Y
++      help
++        Say Y here if you want to use the Linear touchscreen filter, it
++        enables the use of calibration data for the touchscreen.
++
++endif
++
+ config TOUCHSCREEN_ADS7846
+       tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+       depends on SPI_MASTER
+@@ -79,6 +127,24 @@
+         To compile this driver as a module, choose M here: the
+         module will be called fujitsu-ts.
++config TOUCHSCREEN_S3C2410
++      tristate "Samsung S3C2410 touchscreen input driver"
++      depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
++      select SERIO
++      help
++        Say Y here if you have the s3c2410 touchscreen.
++
++        If unsure, say N.
++
++        To compile this driver as a module, choose M here: the
++        module will be called s3c2410_ts.
++
++config TOUCHSCREEN_S3C2410_DEBUG
++      boolean "Samsung S3C2410 touchscreen debug messages"
++      depends on TOUCHSCREEN_S3C2410
++      help
++        Select this if you want debug messages
++
+ config TOUCHSCREEN_GUNZE
+       tristate "Gunze AHL-51S touchscreen"
+       select SERIO
+@@ -408,4 +474,15 @@
+         To compile this driver as a module, choose M here: the
+         module will be called tsc2007.
++config TOUCHSCREEN_PCAP7200
++      tristate "EETI Projected capacitive touchscreen controller"
++      help
++        Say Y here if you have the EETI PCAP7200 touchscreen
++        controller chip in your system.
++
++        If unsure, say N.
++
++        To compile this driver as a module, choose M here: the
++        module will be called pcap7200.
+ endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/Makefile linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/Makefile   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/Makefile        2009-05-10 22:27:59.000000000 +0200
+@@ -34,3 +34,10 @@
+ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)        += wm9712.o
+ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)        += wm9713.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)    += mainstone-wm97xx.o
++obj-$(CONFIG_TOUCHSCREEN_S3C2410)     += s3c2410_ts.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER)      += ts_filter_chain.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_GROUP)        += ts_filter_group.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_LINEAR)       += ts_filter_linear.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEDIAN)       += ts_filter_median.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEAN) += ts_filter_mean.o
++obj-$(CONFIG_TOUCHSCREEN_PCAP7200)    += pcap7200_ts.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/pcap7200_ts.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/pcap7200_ts.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/pcap7200_ts.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/pcap7200_ts.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,309 @@
++ /* Projected capacitive touchscreen controller driver.
++ *
++ * Copyright(c) 2008 Openmoko Inc.
++ *
++ * Author: Matt Hsu <matt_hsu@openmoko.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * TODO
++ * - apply ts_filter
++ * - add support for gesture event
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/input.h>
++#include <linux/device.h>
++
++#include <linux/pcap7200.h>
++#include <../drivers/input/touchscreen/ts_filter.h>
++
++#include <mach/om-3d7k.h>
++
++#define PCAP7200_OP_MODE_REG  0x07
++#define RPT_PKT_SIZE  5
++#define EVENT_UP      0x80
++#define EVENT_DOWN    0x81
++
++
++#define coord_interpret(msb_byte, lsb_byte) \
++                      (msb_byte << 7 | lsb_byte)
++
++struct pcap7200_data{
++      struct i2c_client *client;
++      struct input_dev *dev;
++      struct ts_filter **tsf;
++      struct mutex lock;
++      int irq;
++      struct work_struct work;
++};
++
++static void pcap7200_work(struct work_struct *work)
++{
++      struct pcap7200_data *pcap =
++              container_of(work, struct pcap7200_data, work);
++      uint8_t rpt_pkt[RPT_PKT_SIZE], event;
++      int coords[2];
++      int ret;
++
++      mutex_lock(&pcap->lock);
++
++      memset(rpt_pkt, 0, sizeof(rpt_pkt));
++
++      BUG_ON(pcap == NULL);
++
++      ret = i2c_master_recv(pcap->client, rpt_pkt, RPT_PKT_SIZE);
++
++      event = rpt_pkt[0];
++
++      /*
++       * this is annonying. system would receive two consecutive interrupts if we set INT
++       * type as LOW_LEVEL. the data we pull from pcap7200 are invalid which are all
++       * zero in the second interrupt.
++       */
++      if (event != 0) {
++              dev_dbg(&pcap->client->dev, "[%2x][%2x][%2x][%2x][%2x]: %d bytes return \n",
++                                      rpt_pkt[0], rpt_pkt[1], rpt_pkt[2],
++                                      rpt_pkt[3], rpt_pkt[4], ret);
++
++              coords[0] = coord_interpret(rpt_pkt[1], rpt_pkt[2]);
++              coords[1] = coord_interpret(rpt_pkt[3], rpt_pkt[4]);
++
++              if (event == EVENT_DOWN) {
++                      input_report_abs(pcap->dev, ABS_X, coords[0]);
++                      input_report_abs(pcap->dev, ABS_Y, coords[1]);
++                      input_report_key(pcap->dev, BTN_TOUCH, 1);
++                      input_report_abs(pcap->dev, ABS_PRESSURE, 1);
++              } else if (event == EVENT_UP) {
++                      input_report_key(pcap->dev, BTN_TOUCH, 0);
++                      input_report_abs(pcap->dev, ABS_PRESSURE, 0);
++              } else {
++                      /* FIMXE: gesture events should be reported here. */
++              }
++
++              input_sync(pcap->dev);
++      }
++
++      mutex_unlock(&pcap->lock);
++      enable_irq(pcap->irq);
++}
++
++static const char *op_mode_name[] = {
++      [SLEEP]                 = "sleep",
++      [WAKEUP]                = "wakeup",
++      [SINGLE_TOUCH]          = "single_touch",
++      [MULTI_TOUCH]           = "multi_touch",
++};
++
++static struct i2c_driver pcap7200_driver;
++
++static int __set_op_mode(struct pcap7200_data *pcap, u_int8_t val)
++{
++      u8 buf[] = { PCAP7200_OP_MODE_REG, val};
++      int ret, i;
++
++      mutex_lock(&pcap->lock);
++
++      val = val & 0x03;
++
++      /* this chip has an issue.
++       * you need to give wakeup call for 3 times if it's
++       * in sleep mode.
++       */
++      if (val == WAKEUP) {
++              for (i = 0; i < 3; i++)
++                      ret = i2c_master_send(pcap->client, buf, sizeof(buf));
++      } else
++              ret = i2c_master_send(pcap->client, buf, sizeof(buf));
++
++      mutex_unlock(&pcap->lock);
++      return ret;
++}
++
++static ssize_t set_op_mode(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcap7200_data *pcap = i2c_get_clientdata(client);
++      u_int8_t i;
++
++      for (i = 0; i < ARRAY_SIZE(op_mode_name); i++) {
++              if (!strncmp(buf, op_mode_name[i], strlen(op_mode_name[i])))
++                      __set_op_mode(pcap, i);
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(op_mode, S_IRUGO | S_IWUSR, NULL, set_op_mode);
++
++static irqreturn_t pcap7200_irq(int irq, void *_pcap)
++{
++      struct pcap7200_data *pcap = _pcap;
++
++      disable_irq(pcap->irq);
++      schedule_work(&pcap->work);
++
++      return IRQ_HANDLED;
++}
++
++static int
++pcap7200_probe(struct i2c_client *client, const struct i2c_device_id *ids)
++{
++      struct pcap7200_data *pcap;
++      struct input_dev *input_dev;
++      int err;
++      struct pcap7200_platform_data *pdata = client->dev.platform_data;
++
++      /* allocate pcap7200 data */
++      pcap = kzalloc(sizeof(struct pcap7200_data), GFP_KERNEL);
++      if (!pcap)
++              return -ENOMEM;
++
++      i2c_set_clientdata(client, pcap);
++      pcap->client = client;
++
++      mutex_init(&pcap->lock);
++
++      /* reset */
++      if (pdata->reset) {
++              pdata->reset();
++              dev_dbg(&client->dev, "hard reset\n");
++      }
++
++      /* operating mode */
++      __set_op_mode(pcap, pdata->mode);
++
++      /* initialize input device */
++      input_dev = input_allocate_device();
++      if (!input_dev) {
++              dev_err(&client->dev, "Unable to allocate the input device\n");
++              err = -ENOMEM;
++              goto exit_kfree;
++      }
++
++      pcap->dev = input_dev;
++      input_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
++                                      BIT_MASK(EV_ABS);
++      input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
++
++      /* configurable resolution 2048x2048 */
++      input_set_abs_params(pcap->dev, ABS_X, 0, 0x7FF, 0, 0);
++      input_set_abs_params(pcap->dev, ABS_Y, 0, 0x7FF, 0, 0);
++      input_set_abs_params(pcap->dev, ABS_PRESSURE, 0, 1, 0, 0);
++
++      input_dev->name = client->name;
++      input_dev->id.bustype = BUS_I2C;
++      input_dev->dev.parent = &client->dev;
++
++      err = input_register_device(input_dev);
++
++      if (err)
++              goto exit_unreg;
++
++      INIT_WORK(&pcap->work, pcap7200_work);
++
++      err = sysfs_create_file(&client->dev.kobj, &dev_attr_op_mode.attr);
++
++      if (err) {
++              dev_err(&client->dev, "Failed to create sysfs\n");
++              goto exit_unreg;
++      }
++
++      /* setup IRQ */
++      if (client->irq < 0) {
++              dev_err(&client->dev,
++                      "No irq allocated in client resources!\n");
++              goto exit_rmsysfs;
++      }
++
++      pcap->irq = client->irq;
++      err = request_irq(pcap->irq, pcap7200_irq, IRQF_TRIGGER_LOW, "pcap7200", pcap);
++
++      if (err < 0)
++              goto exit_rmsysfs;
++
++      return 0;
++
++exit_rmsysfs:
++      sysfs_remove_file(&client->dev.kobj, &dev_attr_op_mode.attr);
++exit_unreg:
++      input_unregister_device(input_dev);
++exit_kfree:
++      kfree(pcap);
++      return err;
++}
++
++static int pcap7200_remove(struct i2c_client *client)
++{
++      struct pcap7200_data *pcap = i2c_get_clientdata(client);
++
++      free_irq(pcap->irq, pcap);
++      input_unregister_device(pcap->dev);
++      kfree(pcap);
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int pcap7200_suspend(struct device *dev, pm_message_t state)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcap7200_data *pcap = i2c_get_clientdata(client);
++
++      __set_op_mode(pcap, SLEEP);
++      return 0;
++}
++
++static int pcap7200_resume(struct device *dev)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct pcap7200_data *pcap = i2c_get_clientdata(client);
++
++      __set_op_mode(pcap, WAKEUP);
++      return 0;
++}
++#else
++#define pcap7200_suspend NULL
++#define pcap7200_resume NULL
++#endif
++
++static struct i2c_device_id pcap7200_id_table[] = {
++      {"pcap7200", 0x0a},
++};
++
++static struct i2c_driver pcap7200_driver = {
++      .driver = {
++              .name    = "pcap7200",
++              .suspend = pcap7200_suspend,
++              .resume  = pcap7200_resume,
++      },
++      .id_table       = pcap7200_id_table,
++      .probe          = pcap7200_probe,
++      .remove         = pcap7200_remove,
++};
++
++static int __init pcap7200_init(void)
++{
++      return i2c_add_driver(&pcap7200_driver);
++}
++
++static void pcap7200_exit(void)
++{
++      i2c_del_driver(&pcap7200_driver);
++}
++module_init(pcap7200_init);
++module_exit(pcap7200_exit);
++
++MODULE_AUTHOR("Matt Hsu <matt_hsu@openmoko.org>");
++MODULE_LICENSE("GPLv2");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/s3c2410_ts.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/s3c2410_ts.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/s3c2410_ts.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/s3c2410_ts.c    2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,593 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
++ * iPAQ H1940 touchscreen support
++ *
++ * ChangeLog
++ *
++ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
++ *      - added clock (de-)allocation code
++ *
++ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
++ *      - h1940_ -> s3c2410 (this driver is now also used on the n30
++ *        machines :P)
++ *      - Debug messages are now enabled with the config option
++ *        TOUCHSCREEN_S3C2410_DEBUG
++ *      - Changed the way the value are read
++ *      - Input subsystem should now work
++ *      - Use ioremap and readl/writel
++ *
++ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
++ *      - Make use of some undocumented features of the touchscreen
++ *        controller
++ *
++ * 2007-05-23: Harald Welte <laforge@openmoko.org>
++ *      - Add proper support for S32440
++ *
++ * 2008-06-23: Andy Green <andy@openmoko.com>
++ *      - removed averaging system
++ *      - added generic Touchscreen filter stuff
++ *
++ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
++ *      - improve interrupt handling
++ */
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/input.h>
++#include <linux/init.h>
++#include <linux/serio.h>
++#include <linux/timer.h>
++#include <linux/kfifo.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include <mach/regs-gpio.h>
++#include <mach/ts.h>
++#include <mach/hardware.h>
++#include <plat/regs-adc.h>
++
++#include "ts_filter_chain.h"
++
++/* For ts.dev.id.version */
++#define S3C2410TSVERSION      0x0101
++
++#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
++
++#define WAIT4INT(x)  (((x)<<8) | \
++                   S3C2410_ADCTSC_YM_SEN | \
++                   S3C2410_ADCTSC_YP_SEN | \
++                   S3C2410_ADCTSC_XP_SEN | \
++                   S3C2410_ADCTSC_XY_PST(3))
++
++#define AUTOPST            (S3C2410_ADCTSC_YM_SEN | \
++                    S3C2410_ADCTSC_YP_SEN | \
++                    S3C2410_ADCTSC_XP_SEN | \
++                    S3C2410_ADCTSC_AUTO_PST | \
++                    S3C2410_ADCTSC_XY_PST(0))
++
++#define DEBUG_LVL    KERN_DEBUG
++
++MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
++MODULE_DESCRIPTION("s3c2410 touchscreen driver");
++MODULE_LICENSE("GPL");
++
++/*
++ * Definitions & global arrays.
++ */
++
++static char *s3c2410ts_name = "s3c2410 TouchScreen";
++
++#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
++#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */
++
++#define TS_STATE_STANDBY 0 /* initial state */
++#define TS_STATE_PRESSED 1
++#define TS_STATE_RELEASE_PENDING 2
++#define TS_STATE_RELEASE 3
++
++/*
++ * Per-touchscreen data.
++ */
++
++struct s3c2410ts {
++      struct input_dev *dev;
++      struct ts_filter_chain *chain;
++      int is_down;
++      int state;
++      struct kfifo *event_fifo;
++};
++
++static struct s3c2410ts ts;
++
++static void __iomem *base_addr;
++
++/*
++ * A few low level functions.
++ */
++
++static inline void s3c2410_ts_connect(void)
++{
++      s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON);
++      s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON);
++      s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON);
++      s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON);
++}
++
++static void s3c2410_ts_start_adc_conversion(void)
++{
++      writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
++             base_addr + S3C2410_ADCTSC);
++      writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START,
++             base_addr + S3C2410_ADCCON);
++}
++
++/*
++ * Just send the input events.
++ */
++
++enum ts_input_event {IE_DOWN = 0, IE_UP};
++
++static void ts_input_report(int event, int coords[])
++{
++#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
++      static char *s[] = {"down", "up"};
++      struct timeval tv;
++
++      do_gettimeofday(&tv);
++#endif
++
++      if (event == IE_DOWN) {
++              input_report_abs(ts.dev, ABS_X, coords[0]);
++              input_report_abs(ts.dev, ABS_Y, coords[1]);
++              input_report_key(ts.dev, BTN_TOUCH, 1);
++              input_report_abs(ts.dev, ABS_PRESSURE, 1);
++
++#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
++              printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n",
++                     (int)tv.tv_usec, s[event], coords[0], coords[1]);
++#endif
++      } else {
++              input_report_key(ts.dev, BTN_TOUCH, 0);
++              input_report_abs(ts.dev, ABS_PRESSURE, 0);
++
++#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
++              printk(DEBUG_LVL "T:%06d %6s\n",
++                     (int)tv.tv_usec, s[event]);
++#endif
++      }
++
++      input_sync(ts.dev);
++}
++
++/*
++ * Manage the state of the touchscreen.
++ */
++
++static void event_send_timer_f(unsigned long data);
++
++static struct timer_list event_send_timer =
++              TIMER_INITIALIZER(event_send_timer_f, 0, 0);
++
++static void event_send_timer_f(unsigned long data)
++{
++      static int noop_counter;
++      int event_type;
++
++      while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
++                         sizeof(int))) {
++              int buf[2];
++
++              switch (event_type) {
++              case 'D':
++                      if (ts.state == TS_STATE_RELEASE_PENDING)
++                              /* Ignore short UP event */
++                              ts.state = TS_STATE_PRESSED;
++                      break;
++
++              case 'U':
++                      ts.state = TS_STATE_RELEASE_PENDING;
++                      break;
++
++              case 'P':
++                      if (ts.is_down) /* stylus_action needs a conversion */
++                              s3c2410_ts_start_adc_conversion();
++
++                      if (unlikely(__kfifo_get(ts.event_fifo,
++                                               (unsigned char *)buf,
++                                               sizeof(int) * 2)
++                                   != sizeof(int) * 2))
++                              goto ts_exit_error;
++
++                      ts_input_report(IE_DOWN, buf);
++                      ts.state = TS_STATE_PRESSED;
++                      break;
++
++              default:
++                      goto ts_exit_error;
++              }
++
++              noop_counter = 0;
++      }
++
++      if (noop_counter++ >= 1) {
++              noop_counter = 0;
++              if (ts.state == TS_STATE_RELEASE_PENDING) {
++                      /*
++                       * We delay the UP event for a while to avoid jitter.
++                       * If we get a DOWN event we do not send it.
++                       */
++                      ts_input_report(IE_UP, NULL);
++                      ts.state = TS_STATE_STANDBY;
++
++                      ts_filter_chain_clear(ts.chain);
++              }
++      } else {
++              mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
++      }
++
++      return;
++
++ts_exit_error: /* should not happen unless we have a bug */
++      printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n");
++}
++
++/*
++ * Manage interrupts.
++ */
++
++static irqreturn_t stylus_updown(int irq, void *dev_id)
++{
++      unsigned long data0;
++      unsigned long data1;
++      int event_type;
++
++      data0 = readl(base_addr+S3C2410_ADCDAT0);
++      data1 = readl(base_addr+S3C2410_ADCDAT1);
++
++      ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) &&
++                                          (!(data1 & S3C2410_ADCDAT0_UPDOWN));
++
++      event_type = ts.is_down ? 'D' : 'U';
++
++      if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
++                   sizeof(int)) != sizeof(int))) /* should not happen */
++              printk(KERN_ERR __FILE__": stylus_updown lost event!\n");
++
++      if (ts.is_down)
++              s3c2410_ts_start_adc_conversion();
++      else
++              writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
++
++      mod_timer(&event_send_timer, jiffies + 1);
++
++      return IRQ_HANDLED;
++}
++
++static irqreturn_t stylus_action(int irq, void *dev_id)
++{
++      int buf[3];
++
++      /* Grab the ADC results. */
++      buf[1] = readl(base_addr + S3C2410_ADCDAT0) &
++                     S3C2410_ADCDAT0_XPDATA_MASK;
++      buf[2] = readl(base_addr + S3C2410_ADCDAT1) &
++                     S3C2410_ADCDAT1_YPDATA_MASK;
++
++      switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
++      case 0:
++              /* The filter wants more points. */
++              s3c2410_ts_start_adc_conversion();
++              return IRQ_HANDLED;
++      case 1:
++              /* We have a point from the filters or no filtering enabled. */
++              buf[0] = 'P';
++              break;
++      default:
++              printk(KERN_ERR __FILE__
++                     ":%d Invalid ts_filter_chain_feed return value.\n",
++                     __LINE__);
++      case -1:
++              /* Error. Ignore the event. */
++              ts_filter_chain_clear(ts.chain);
++              writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
++              return IRQ_HANDLED;
++      };
++
++      if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
++                   sizeof(int) * 3) != sizeof(int) * 3))
++              printk(KERN_ERR __FILE__":stylus_action bug.\n");
++
++      writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
++      mod_timer(&event_send_timer, jiffies + 1);
++
++      return IRQ_HANDLED;
++}
++
++static struct clk     *adc_clock;
++
++/*
++ * The functions for inserting/removing us as a module.
++ */
++
++static int __init s3c2410ts_probe(struct platform_device *pdev)
++{
++      int rc;
++      struct s3c2410_ts_mach_info *info;
++      struct input_dev *input_dev;
++      int ret = 0;
++
++      dev_info(&pdev->dev, "Starting\n");
++
++      info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
++
++      if (!info)
++      {
++              dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n");
++              return -EINVAL;
++      }
++
++#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
++      printk(DEBUG_LVL "Entering s3c2410ts_init\n");
++#endif
++
++      adc_clock = clk_get(NULL, "adc");
++      if (!adc_clock) {
++              dev_err(&pdev->dev, "failed to get adc clock source\n");
++              return -ENOENT;
++      }
++      clk_enable(adc_clock);
++
++#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
++      printk(DEBUG_LVL "got and enabled clock\n");
++#endif
++
++      base_addr = ioremap(S3C2410_PA_ADC,0x20);
++      if (base_addr == NULL) {
++              dev_err(&pdev->dev, "Failed to remap register block\n");
++              ret = -ENOMEM;
++              goto bail0;
++      }
++
++
++      /* If we acutally are a S3C2410: Configure GPIOs */
++      if (!strcmp(pdev->name, "s3c2410-ts"))
++              s3c2410_ts_connect();
++
++      if ((info->presc & 0xff) > 0)
++              writel(S3C2410_ADCCON_PRSCEN |
++                     S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
++                                                  base_addr + S3C2410_ADCCON);
++      else
++              writel(0, base_addr+S3C2410_ADCCON);
++
++      /* Initialise registers */
++      if ((info->delay & 0xffff) > 0)
++              writel(info->delay & 0xffff,  base_addr + S3C2410_ADCDLY);
++
++      writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
++
++      /* Initialise input stuff */
++      memset(&ts, 0, sizeof(struct s3c2410ts));
++      input_dev = input_allocate_device();
++
++      if (!input_dev) {
++              dev_err(&pdev->dev, "Unable to allocate the input device\n");
++              ret = -ENOMEM;
++              goto bail1;
++      }
++
++      ts.dev = input_dev;
++      ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
++                         BIT_MASK(EV_ABS);
++      ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
++      input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
++      input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
++      input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
++
++      ts.dev->name = s3c2410ts_name;
++      ts.dev->id.bustype = BUS_RS232;
++      ts.dev->id.vendor = 0xDEAD;
++      ts.dev->id.product = 0xBEEF;
++      ts.dev->id.version = S3C2410TSVERSION;
++      ts.state = TS_STATE_STANDBY;
++      ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
++      if (IS_ERR(ts.event_fifo)) {
++              ret = -EIO;
++              goto bail2;
++      }
++
++      /* create the filter chain set up for the 2 coordinates we produce */
++      ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
++
++      if (IS_ERR(ts.chain))
++              goto bail2;
++
++      ts_filter_chain_clear(ts.chain);
++
++      /* Get irqs */
++      if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM,
++                                                  "s3c2410_action", ts.dev)) {
++              dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n");
++              iounmap(base_addr);
++              ret = -EIO;
++              goto bail3;
++      }
++      if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,
++                      "s3c2410_action", ts.dev)) {
++              dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
++              free_irq(IRQ_ADC, ts.dev);
++              iounmap(base_addr);
++              ret = -EIO;
++              goto bail4;
++      }
++
++      dev_info(&pdev->dev, "Successfully loaded\n");
++
++      /* All went ok, so register to the input system */
++      rc = input_register_device(ts.dev);
++      if (rc) {
++              ret = -EIO;
++              goto bail5;
++      }
++
++      return 0;
++
++bail5:
++      free_irq(IRQ_TC, ts.dev);
++      free_irq(IRQ_ADC, ts.dev);
++      clk_disable(adc_clock);
++      iounmap(base_addr);
++      disable_irq(IRQ_TC);
++bail4:
++      disable_irq(IRQ_ADC);
++bail3:
++      ts_filter_chain_destroy(ts.chain);
++      kfifo_free(ts.event_fifo);
++bail2:
++      input_unregister_device(ts.dev);
++bail1:
++      iounmap(base_addr);
++bail0:
++
++      return ret;
++}
++
++static int s3c2410ts_remove(struct platform_device *pdev)
++{
++      disable_irq(IRQ_ADC);
++      disable_irq(IRQ_TC);
++      free_irq(IRQ_TC,ts.dev);
++      free_irq(IRQ_ADC,ts.dev);
++
++      if (adc_clock) {
++              clk_disable(adc_clock);
++              clk_put(adc_clock);
++              adc_clock = NULL;
++      }
++
++      input_unregister_device(ts.dev);
++      iounmap(base_addr);
++
++      ts_filter_chain_destroy(ts.chain);
++
++      kfifo_free(ts.event_fifo);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC);
++      writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
++             base_addr+S3C2410_ADCCON);
++
++      disable_irq(IRQ_ADC);
++      disable_irq(IRQ_TC);
++
++      clk_disable(adc_clock);
++
++      return 0;
++}
++
++static int s3c2410ts_resume(struct platform_device *pdev)
++{
++      struct s3c2410_ts_mach_info *info =
++              ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
++
++      clk_enable(adc_clock);
++      mdelay(1);
++
++      ts_filter_chain_clear(ts.chain);
++
++      enable_irq(IRQ_ADC);
++      enable_irq(IRQ_TC);
++
++      if ((info->presc&0xff) > 0)
++              writel(S3C2410_ADCCON_PRSCEN |
++                     S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
++                                                    base_addr+S3C2410_ADCCON);
++      else
++              writel(0,base_addr+S3C2410_ADCCON);
++
++      /* Initialise registers */
++      if ((info->delay & 0xffff) > 0)
++              writel(info->delay & 0xffff,  base_addr+S3C2410_ADCDLY);
++
++      writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
++
++      return 0;
++}
++
++#else
++#define s3c2410ts_suspend NULL
++#define s3c2410ts_resume  NULL
++#endif
++
++static struct platform_driver s3c2410ts_driver = {
++       .driver         = {
++             .name   = "s3c2410-ts",
++             .owner  = THIS_MODULE,
++       },
++       .probe          = s3c2410ts_probe,
++       .remove         = s3c2410ts_remove,
++       .suspend        = s3c2410ts_suspend,
++       .resume         = s3c2410ts_resume,
++
++};
++
++static struct platform_driver s3c2440ts_driver = {
++       .driver         = {
++             .name   = "s3c2440-ts",
++             .owner  = THIS_MODULE,
++       },
++       .probe          = s3c2410ts_probe,
++       .remove         = s3c2410ts_remove,
++       .suspend        = s3c2410ts_suspend,
++       .resume         = s3c2410ts_resume,
++
++};
++
++static int __init s3c2410ts_init(void)
++{
++      int rc;
++
++      rc = platform_driver_register(&s3c2410ts_driver);
++      if (rc < 0)
++              return rc;
++
++      rc = platform_driver_register(&s3c2440ts_driver);
++      if (rc < 0)
++              platform_driver_unregister(&s3c2410ts_driver);
++
++      return rc;
++}
++
++static void __exit s3c2410ts_exit(void)
++{
++      platform_driver_unregister(&s3c2440ts_driver);
++      platform_driver_unregister(&s3c2410ts_driver);
++}
++
++module_init(s3c2410ts_init);
++module_exit(s3c2410ts_exit);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_chain.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_chain.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_chain.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_chain.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,183 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (c) 2008,2009 Andy Green <andy@openmoko.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/device.h>
++
++#include "ts_filter_chain.h"
++#include "ts_filter.h"
++
++/*
++ * Tux, would you like the following function in /lib?
++ * It helps us avoid silly code.
++ */
++
++/**
++ * sptrlen - Count how many non-null pointers are in a pointer array
++ * @arr: The array of pointers
++ */
++static int sptrlen(const void *arr)
++{
++      /* All pointers have the same size. */
++      const int **p = (const int **)arr;
++      int len = 0;
++
++      while (*(p++))
++              len++;
++
++      return len;
++}
++
++
++struct ts_filter_chain {
++      /* All of the filters. */
++      struct ts_filter **arr;
++      /* Filters that can propagate values in the chain. */
++      struct ts_filter **pchain;
++      /* Length of the pchain array. */
++      int pchain_len;
++      /* FIXME: Add a spinlock and use it. */
++};
++
++struct ts_filter_chain *ts_filter_chain_create(
++      struct platform_device *pdev,
++      const struct ts_filter_chain_configuration conf[],
++      int count_coords)
++{
++      struct ts_filter_chain *c;
++      int count = 0;
++      int len;
++
++      BUG_ON((count_coords < 1));
++      BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
++
++      c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
++      if (!c)
++              goto create_err_1;
++
++      len = (sptrlen(conf) + 1);
++      /* Memory for two null-terminated arrays of filters. */
++      c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
++      if (!c->arr)
++              goto create_err_1;
++      c->pchain = c->arr + len;
++
++      while (conf->api) {
++              /* TODO: Can we get away with only sending pdev->dev? */
++              struct ts_filter *f =
++                      (conf->api->create)(pdev, conf->config, count_coords);
++              if (!f) {
++                      dev_info(&pdev->dev, "Filter %d creation failed\n",
++                               count);
++                      goto create_err_2;
++              }
++
++              f->api = conf->api;
++              c->arr[count++] = f;
++
++              if (f->api->haspoint && f->api->getpoint && f->api->process)
++                      c->pchain[c->pchain_len++] = f;
++
++              conf++;
++      }
++
++      dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
++
++      return c;
++
++create_err_2:
++      ts_filter_chain_destroy(c); /* Also frees c. */
++create_err_1:
++      dev_info(&pdev->dev, "Error in filter chain initialization\n");
++      /*
++       * FIXME: Individual filters have to return errors this way.
++       * We only have to forward the errors we find.
++       */
++      return ERR_PTR(-ENOMEM);
++}
++EXPORT_SYMBOL_GPL(ts_filter_chain_create);
++
++void ts_filter_chain_destroy(struct ts_filter_chain *c)
++{
++      if (c->arr) {
++              struct ts_filter **a = c->arr;
++              while (*a) {
++                      ((*a)->api->destroy)(*a);
++                      a++;
++              }
++              kfree(c->arr);
++      }
++      kfree(c);
++}
++EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
++
++void ts_filter_chain_clear(struct ts_filter_chain *c)
++{
++      struct ts_filter **a = c->arr;
++
++      while (*a) {
++              if ((*a)->api->clear)
++                      ((*a)->api->clear)(*a);
++              a++;
++      }
++}
++EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
++
++static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
++{
++      struct ts_filter **a = c->arr;
++      while (*a) {
++              if ((*a)->api->scale)
++                      ((*a)->api->scale)(*a, coords);
++              a++;
++      }
++}
++
++int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
++{
++      int len = c->pchain_len;
++      int i = len - 1;
++
++      if (!c->pchain[0])
++              return 1; /* Nothing to do. */
++
++      BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
++
++      if (c->pchain[0]->api->process(c->pchain[0], coords))
++              return -1;
++
++      while (i >= 0 && i < len) {
++              if (c->pchain[i]->api->haspoint(c->pchain[i])) {
++                      c->pchain[i]->api->getpoint(c->pchain[i], coords);
++                      if (++i < len &&
++                          c->pchain[i]->api->process(c->pchain[i], coords))
++                              return -1; /* Error. */
++              } else {
++                      i--;
++              }
++      }
++
++      if (i >= 0) {   /* Same as i == len. */
++              ts_filter_chain_scale(c, coords);
++              return 1;
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_chain.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_chain.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_chain.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_chain.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,58 @@
++#ifndef __TS_FILTER_CHAIN_H__
++#define __TS_FILTER_CHAIN_H__
++
++/*
++ * Touchscreen filter chains.
++ *
++ * (c) 2008,2009 Andy Green <andy@openmoko.com>
++ */
++
++#include "ts_filter.h"
++
++#include <linux/err.h>
++
++struct ts_filter_chain_configuration {
++      /* API to use. */
++      const struct ts_filter_api *api;
++      /* Generic filter configuration. Different for each filter. */
++      const struct ts_filter_configuration *config;
++};
++
++struct ts_filter_chain;
++
++#ifdef CONFIG_TOUCHSCREEN_FILTER
++
++/*
++ * Create a filter chain. It will allocate an array of
++ * null-terminated pointers to filters. On error it will return
++ * an error you can check with IS_ERR.
++ */
++extern struct ts_filter_chain *ts_filter_chain_create(
++      struct platform_device *pdev,
++      const struct ts_filter_chain_configuration conf[],
++      int count_coords);
++
++/* Destroy the chain. */
++extern void ts_filter_chain_destroy(struct ts_filter_chain *c);
++
++/* Clear the filter chain. */
++extern void ts_filter_chain_clear(struct ts_filter_chain *c);
++
++/*
++ * Try to get one point. Returns 0 if no points are available.
++ * coords will be used as temporal space, thus you supply a point
++ * using coords but you shouldn't rely on its value on return unless
++ * it returns a nonzero value that is not -1.
++ * If one of the filters find an error then this function will
++ * return -1.
++ */
++int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords);
++
++#else /* !CONFIG_TOUCHSCREEN_FILTER */
++#define ts_filter_chain_create(pdev, config, count_coords) (NULL)
++#define ts_filter_chain_destroy(c) do { } while (0)
++#define ts_filter_chain_clear(c) do { } while (0)
++#define ts_filter_chain_feed(c, coords) (1)
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_group.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_group.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_group.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_group.c       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,296 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (C) 2008,2009 by Openmoko, Inc.
++ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
++ * All rights reserved.
++ *
++ *
++ * This filter is useful to reject samples that are not reliable. We consider
++ * that a sample is not reliable if it deviates form the Majority.
++ *
++ * 1) We collect S samples.
++ *
++ * 2) For each dimension:
++ *
++ *  - We sort the points.
++ *  - Points that are "close enough" are considered to be in the same set.
++ *  - We choose the set with more elements. If more than "threshold"
++ *    points are in this set we use the first and the last point of the set
++ *    to define the valid range for this dimension [min, max], otherwise we
++ *    discard all the points and go to step 1.
++ *
++ * 3) We consider the unsorted S samples and try to feed them to the next
++ *    filter in the chain. If one of the points of each sample
++ *    is not in the allowed range for its dimension, we discard the sample.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/sort.h>
++#include "ts_filter_group.h"
++
++struct ts_filter_group {
++      /* Private filter configuration. */
++      struct ts_filter_group_configuration *config;
++      /* Filter API. */
++      struct ts_filter tsf;
++
++      int N;                  /* How many samples we have. */
++      int *samples[MAX_TS_FILTER_COORDS];     /* The samples: our input. */
++
++      int *group_size;        /* Used for temporal computations. */
++      int *sorted_samples;    /* Used for temporal computations. */
++
++      int range_max[MAX_TS_FILTER_COORDS];    /* Max. computed ranges. */
++      int range_min[MAX_TS_FILTER_COORDS];    /* Min. computed ranges. */
++
++      int tries_left;         /* We finish if we don't get enough samples. */
++      int ready;              /* If we are ready to deliver samples. */
++      int result;             /* Index of the point being returned. */
++};
++
++#define ts_filter_to_filter_group(f) \
++      container_of(f, struct ts_filter_group, tsf)
++
++
++static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
++                                         int attempts)
++{
++      tsfg->N = 0;
++      tsfg->tries_left = attempts;
++      tsfg->ready = 0;
++      tsfg->result = 0;
++}
++
++static void ts_filter_group_clear(struct ts_filter *tsf)
++{
++      struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
++
++      ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
++}
++
++static struct ts_filter *ts_filter_group_create(
++      struct platform_device *pdev,
++      const struct ts_filter_configuration *conf,
++      int count_coords)
++{
++      struct ts_filter_group *tsfg;
++      int i;
++
++      tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
++      if (!tsfg)
++              return NULL;
++
++      tsfg->config = container_of(conf,
++                                  struct ts_filter_group_configuration,
++                                  config);
++      tsfg->tsf.count_coords = count_coords;
++
++      BUG_ON(tsfg->config->attempts <= 0);
++
++      tsfg->samples[0] = kmalloc((2 + count_coords) * sizeof(int) *
++                                 tsfg->config->length, GFP_KERNEL);
++      if (!tsfg->samples[0]) {
++              kfree(tsfg);
++              return NULL;
++      }
++      for (i = 1; i < count_coords; ++i)
++              tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
++      tsfg->sorted_samples = tsfg->samples[0] + count_coords *
++                             tsfg->config->length;
++      tsfg->group_size = tsfg->samples[0] + (1 + count_coords) *
++                             tsfg->config->length;
++
++      ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
++
++      dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
++               "thresh:%d\n", tsfg->config->length, count_coords,
++               tsfg->config->close_enough, tsfg->config->threshold);
++
++      return &tsfg->tsf;
++}
++
++static void ts_filter_group_destroy(struct ts_filter *tsf)
++{
++      struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
++
++      kfree(tsfg->samples[0]); /* first guy has pointer from kmalloc */
++      kfree(tsf);
++}
++
++static int int_cmp(const void *_a, const void *_b)
++{
++      const int *a = _a;
++      const int *b = _b;
++
++      if (*a > *b)
++              return 1;
++      if (*a < *b)
++              return -1;
++      return 0;
++}
++
++static void ts_filter_group_prepare_next(struct ts_filter *tsf);
++
++static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
++{
++      struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
++      int n;
++      int i;
++
++      BUG_ON(tsfg->N >= tsfg->config->length);
++      BUG_ON(tsfg->ready);
++
++      for (n = 0; n < tsf->count_coords; n++)
++              tsfg->samples[n][tsfg->N] = coords[n];
++
++      if (++tsfg->N < tsfg->config->length)
++              return 0;       /* We need more samples. */
++
++      for (n = 0; n < tsfg->tsf.count_coords; n++) {
++              int *v = tsfg->sorted_samples;
++              int ngroups = 0;
++              int best_size;
++              int best_idx = 0;
++              int idx = 0;
++
++              memcpy(v, tsfg->samples[n], tsfg->N * sizeof(int));
++              /*
++               * FIXME: Remove this sort call. We already have the
++               * algorithm for this modification. The filter will
++               * need less points (about half) if there is not a
++               * lot of noise. Right now we are doing a constant
++               * amount of work no matter how much noise we are
++               * dealing with.
++               */
++              sort(v, tsfg->N, sizeof(int), int_cmp, NULL);
++
++              tsfg->group_size[0] = 1;
++              for (i = 1; i < tsfg->N; ++i) {
++                      if (v[i] - v[i - 1] <= tsfg->config->close_enough)
++                              tsfg->group_size[ngroups]++;
++                      else
++                              tsfg->group_size[++ngroups] = 1;
++              }
++              ngroups++;
++
++              best_size = tsfg->group_size[0];
++              for (i = 1; i < ngroups; i++) {
++                      idx += tsfg->group_size[i - 1];
++                      if (best_size < tsfg->group_size[i]) {
++                              best_size = tsfg->group_size[i];
++                              best_idx = idx;
++                      }
++              }
++
++              if (best_size < tsfg->config->threshold) {
++                      /* This set is not good enough for us. */
++                      if (--tsfg->tries_left) {
++                              ts_filter_group_clear_internal
++                                      (tsfg, tsfg->tries_left);
++                              /* No errors but we need more samples. */
++                              return 0;
++                      }
++                      return 1; /* We give up: error. */
++              }
++
++              tsfg->range_min[n] = v[best_idx];
++              tsfg->range_max[n] = v[best_idx + best_size - 1];
++      }
++
++      ts_filter_group_prepare_next(tsf);
++
++      return 0;
++}
++
++/*
++ * This private function prepares a point that will be returned
++ * in ts_filter_group_getpoint if it is available. It updates
++ * the priv->ready state also.
++ */
++static void ts_filter_group_prepare_next(struct ts_filter *tsf)
++{
++      struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
++      int n;
++
++      while (priv->result < priv->N) {
++              for (n = 0; n < priv->tsf.count_coords; ++n) {
++                      if (priv->samples[n][priv->result] <
++                          priv->range_min[n] ||
++                          priv->samples[n][priv->result] > priv->range_max[n])
++                              break;
++              }
++
++              if (n == priv->tsf.count_coords) /* Sample is OK. */
++                      break;
++
++              priv->result++;
++      }
++
++      if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
++              ts_filter_group_clear_internal(priv, priv->config->attempts);
++              priv->ready = 0;
++      } else {
++              priv->ready = 1;
++      }
++}
++
++static int ts_filter_group_haspoint(struct ts_filter *tsf)
++{
++      struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
++
++      return priv->ready;
++}
++
++static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
++{
++      struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
++      int n;
++
++      BUG_ON(!priv->ready);
++
++      for (n = 0; n < priv->tsf.count_coords; n++)
++              point[n] = priv->samples[n][priv->result];
++
++      priv->result++;
++
++      /* This call will update priv->ready. */
++      ts_filter_group_prepare_next(tsf);
++}
++
++/*
++ * Get ready to process the next batch of points, forget
++ * points we could have delivered.
++ */
++static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
++{
++      struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
++
++      ts_filter_group_clear_internal(priv, priv->config->attempts);
++}
++
++const struct ts_filter_api ts_filter_group_api = {
++      .create =       ts_filter_group_create,
++      .destroy =      ts_filter_group_destroy,
++      .clear =        ts_filter_group_clear,
++      .process =      ts_filter_group_process,
++      .haspoint =     ts_filter_group_haspoint,
++      .getpoint =     ts_filter_group_getpoint,
++      .scale =        ts_filter_group_scale,
++};
++EXPORT_SYMBOL_GPL(ts_filter_group_api);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_group.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_group.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_group.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_group.h       2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,36 @@
++#ifndef __TS_FILTER_GROUP_H__
++#define __TS_FILTER_GROUP_H__
++
++#include "ts_filter.h"
++
++/*
++ * Touchscreen group filter.
++ *
++ * Copyright (C) 2008,2009 by Openmoko, Inc.
++ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
++ *
++ */
++
++struct ts_filter_group_configuration {
++      /* Size of the filter. */
++      int length;
++      /*
++       * If two points are separated by this distance or less they
++       * are considered to be members of the same group.
++       */
++      int close_enough;
++      /* Minimum allowed size for the biggest group in the sample set. */
++      int threshold;
++      /*
++       * Number of times we try to get a group of points with at least
++       * threshold points.
++       */
++      int attempts;
++
++      /* Generic filter configuration. */
++      struct ts_filter_configuration config;
++};
++
++extern const struct ts_filter_api ts_filter_group_api;
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter.h     2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,74 @@
++#ifndef __TS_FILTER_H__
++#define __TS_FILTER_H__
++
++/*
++ * Touchscreen filter.
++ *
++ * (c) 2008,2009 Andy Green <andy@openmoko.com>
++ */
++
++#include <linux/platform_device.h>
++
++#define MAX_TS_FILTER_COORDS          3  /* X, Y and Z (pressure). */
++
++struct ts_filter;
++struct ts_filter_configuration;
++
++/* Operations that a filter can perform. */
++
++struct ts_filter_api {
++      /* Create the filter - mandatory. */
++      struct ts_filter * (*create)(
++              struct platform_device *pdev,
++              const struct ts_filter_configuration *config,
++              int count_coords);
++      /* Destroy the filter - mandatory. */
++      void (*destroy)(struct ts_filter *filter);
++      /* Clear the filter - optional. */
++      void (*clear)(struct ts_filter *filter);
++
++
++      /*
++       * The next three API functions only make sense if all of them are
++       * set for a filter. If a filter has the next three methods then
++       * it can propagate coordinates in the chain.
++       */
++
++      /*
++       * Process the filter.
++       * It returns non-zero if the filter reaches an error.
++       */
++      int (*process)(struct ts_filter *filter, int *coords);
++      /*
++       * Is the filter ready to return a point?
++       * Please do not code side effects in this function.
++       */
++      int (*haspoint)(struct ts_filter *filter);
++      /*
++       * Get a point.
++       * Do not call unless the filter actually has a point to deliver.
++       */
++      void (*getpoint)(struct ts_filter *filter, int *coords);
++
++      /*
++       * Scale the points - optional.
++       * A filter could only scale coordinates.
++       */
++      void (*scale)(struct ts_filter *filter, int *coords);
++};
++
++/*
++ * Generic filter configuration. Actual configurations have this structure
++ * as a member.
++ */
++struct ts_filter_configuration {
++};
++
++struct ts_filter {
++      /* Operations for this filter. */
++      const struct ts_filter_api *api;
++      /* Number of coordinates to process. */
++      int count_coords;
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_linear.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_linear.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_linear.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_linear.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,212 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (C) 2008,2009 by Openmoko, Inc.
++ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
++ * All rights reserved.
++ *
++ * Linearly scale touchscreen values.
++ *
++ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
++ * using sysfs.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++
++#include "ts_filter_linear.h"
++
++struct ts_filter_linear;
++
++/* Sysfs code. */
++
++struct const_obj {
++      /* The actual private object. */
++      struct ts_filter_linear *tsfl;
++      /* Our kobject. */
++      struct kobject kobj;
++};
++
++#define to_const_obj(x) container_of(x, struct const_obj, kobj)
++
++struct const_attribute {
++      struct attribute attr;
++      ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
++                      char *buf);
++      ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
++                       const char *buf, size_t count);
++};
++
++#define to_const_attr(x) container_of(x, struct const_attribute, attr)
++
++
++/* Private linear filter structure. */
++
++struct ts_filter_linear {
++      /* Private configuration for this filter. */
++      struct ts_filter_linear_configuration *config;
++
++      /* Generic filter API. */
++      struct ts_filter tsf;
++
++      /* Linear constants for the transformation. */
++      int constants[TS_FILTER_LINEAR_NCONSTANTS];
++
++      /* Sysfs. */
++
++      /* Our const_object. */
++      struct const_obj c_obj;
++      /* Our type. We will stick operations to it. */
++      struct kobj_type const_ktype;
++      /* Attrs. of the virtual files. */
++      struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
++      /* Default Attrs. Always NULL for us. */
++      struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
++      /* Storage for the name of the virtual files. */
++      char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
++};
++
++#define ts_filter_to_filter_linear(f) \
++      container_of(f, struct ts_filter_linear, tsf)
++
++/* Sysfs functions. */
++
++static ssize_t const_attr_show(struct kobject *kobj,
++                             struct attribute *attr,
++                             char *buf)
++{
++      struct const_attribute *a = to_const_attr(attr);
++
++      return a->show(to_const_obj(kobj), a, buf);
++}
++
++static ssize_t const_attr_store(struct kobject *kobj,
++                              struct attribute *attr,
++                              const char *buf, size_t len)
++{
++      struct const_attribute *a = to_const_attr(attr);
++
++      return a->store(to_const_obj(kobj), a, buf, len);
++}
++
++static struct sysfs_ops const_sysfs_ops = {
++      .show =         const_attr_show,
++      .store =        const_attr_store,
++};
++
++static void const_release(struct kobject *kobj)
++{
++      kfree(to_const_obj(kobj)->tsfl);
++}
++
++static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
++                        char *buf)
++{
++      int who;
++
++      sscanf(attr->attr.name, "%d", &who);
++      return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
++}
++
++static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
++                         const char *buf, size_t count)
++{
++      int who;
++
++      sscanf(attr->attr.name, "%d", &who);
++      sscanf(buf, "%d", &obj->tsfl->constants[who]);
++      return count;
++}
++
++/* Filter functions. */
++
++static struct ts_filter *ts_filter_linear_create(
++      struct platform_device *pdev,
++      const struct ts_filter_configuration *conf,
++      int count_coords)
++{
++      struct ts_filter_linear *tsfl;
++      int i;
++      int ret;
++
++      tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
++      if (!tsfl)
++              return NULL;
++
++      tsfl->config = container_of(conf,
++                                  struct ts_filter_linear_configuration,
++                                  config);
++
++      tsfl->tsf.count_coords = count_coords;
++
++      for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
++              tsfl->constants[i] = tsfl->config->constants[i];
++
++              /* sysfs */
++              sprintf(tsfl->attr_names[i], "%d", i);
++              tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
++              tsfl->kattrs[i].attr.mode = 0666;
++              tsfl->kattrs[i].show = const_show;
++              tsfl->kattrs[i].store = const_store;
++              tsfl->attrs[i] = &tsfl->kattrs[i].attr;
++      }
++      tsfl->attrs[i] = NULL;
++
++      tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
++      tsfl->const_ktype.release = const_release;
++      tsfl->const_ktype.default_attrs = tsfl->attrs;
++      tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
++
++      ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
++                                 &pdev->dev.kobj, "calibration");
++      if (ret) {
++              kobject_put(&tsfl->c_obj.kobj);
++              return NULL;
++      }
++
++      dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
++
++      return &tsfl->tsf;
++}
++
++static void ts_filter_linear_destroy(struct ts_filter *tsf)
++{
++      struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
++
++      /* Kernel frees tsfl in const_release. */
++      kobject_put(&tsfl->c_obj.kobj);
++}
++
++static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
++{
++      struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
++
++      int *k = tsfl->constants;
++      int c0 = coords[tsfl->config->coord0];
++      int c1 = coords[tsfl->config->coord1];
++
++      coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
++      coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
++}
++
++const struct ts_filter_api ts_filter_linear_api = {
++      .create =       ts_filter_linear_create,
++      .destroy =      ts_filter_linear_destroy,
++      .scale =        ts_filter_linear_scale,
++};
++EXPORT_SYMBOL_GPL(ts_filter_linear_api);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_linear.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_linear.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_linear.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_linear.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,31 @@
++#ifndef __TS_FILTER_LINEAR_H__
++#define __TS_FILTER_LINEAR_H__
++
++#include "ts_filter.h"
++#include <linux/kobject.h>
++
++/*
++ * Touchscreen linear filter.
++ *
++ * Copyright (C) 2008,2009 by Openmoko, Inc.
++ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
++ *
++ */
++
++#define TS_FILTER_LINEAR_NCONSTANTS 7
++
++struct ts_filter_linear_configuration {
++      /* Calibration constants. */
++      int constants[TS_FILTER_LINEAR_NCONSTANTS];
++      /* First coordinate. */
++      int coord0;
++      /* Second coordinate. */
++      int coord1;
++
++      /* Generic filter configuration. */
++      struct ts_filter_configuration config;
++};
++
++extern const struct ts_filter_api ts_filter_linear_api;
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_mean.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_mean.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_mean.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_mean.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,174 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (c) 2008,2009
++ *       Andy Green <andy@openmoko.com>
++ *       Nelson Castillo <arhuaco@freaks-unidos.net>
++ *
++ * Simple mean filter.
++ *
++ */
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++
++#include "ts_filter_mean.h"
++
++struct ts_filter_mean {
++      /* Copy of the private filter configuration. */
++      struct ts_filter_mean_configuration *config;
++      /* Filter API. */
++      struct ts_filter tsf;
++
++      /* Index on a circular buffer. */
++      int curr;
++      /* Useful to tell if the circular buffer is full(read:ready). */
++      int count;
++      /* Sumation used to compute the mean. */
++      int sum[MAX_TS_FILTER_COORDS];
++      /* Keep point values and decrement them from the sum on time. */
++      int *fifo[MAX_TS_FILTER_COORDS];
++      /* Store the output of this filter. */
++      int ready;
++};
++
++#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
++
++
++static void ts_filter_mean_clear(struct ts_filter *tsf);
++
++static struct ts_filter *ts_filter_mean_create(
++      struct platform_device *pdev,
++      const struct ts_filter_configuration *conf,
++      int count_coords)
++{
++      struct ts_filter_mean *priv;
++      int *v;
++      int n;
++
++      priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
++      if (!priv)
++              return NULL;
++
++      priv->tsf.count_coords = count_coords;
++      priv->config = container_of(conf,
++                                  struct ts_filter_mean_configuration,
++                                  config);
++
++      BUG_ON(priv->config->length <= 0);
++
++      v = kmalloc(priv->config->length * sizeof(int) * count_coords,
++                  GFP_KERNEL);
++      if (!v)
++              return NULL;
++
++      for (n = 0; n < count_coords; n++) {
++              priv->fifo[n] = v;
++              v += priv->config->length;
++      }
++
++      ts_filter_mean_clear(&priv->tsf);
++
++      dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
++               priv->config->length, count_coords);
++
++      return &priv->tsf;
++}
++
++static void ts_filter_mean_destroy(struct ts_filter *tsf)
++{
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++
++      kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
++      kfree(tsf);
++}
++
++static void ts_filter_mean_clear(struct ts_filter *tsf)
++{
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++
++      priv->count = 0;
++      priv->curr = 0;
++      priv->ready = 0;
++      memset(priv->sum, 0, tsf->count_coords * sizeof(int));
++}
++
++static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
++{
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++      int n;
++
++      BUG_ON(priv->ready);
++
++      for (n = 0; n < tsf->count_coords; n++) {
++              priv->sum[n] += coords[n];
++              priv->fifo[n][priv->curr] = coords[n];
++      }
++
++      if (priv->count + 1 == priv->config->length)
++              priv->ready = 1;
++      else
++              priv->count++;
++
++      priv->curr = (priv->curr + 1) % priv->config->length;
++
++      return 0; /* No error. */
++}
++
++static int ts_filter_mean_haspoint(struct ts_filter *tsf)
++{
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++
++      return priv->ready;
++}
++
++static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
++{
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++      int n;
++
++      BUG_ON(!priv->ready);
++
++      for (n = 0; n < tsf->count_coords; n++) {
++              point[n] = priv->sum[n];
++              priv->sum[n] -= priv->fifo[n][priv->curr];
++      }
++
++      priv->ready = 0;
++}
++
++static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
++{
++      int n;
++      struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
++
++      for (n = 0; n < tsf->count_coords; n++) {
++              coords[n] += priv->config->length >> 1; /* Rounding. */
++              coords[n] /= priv->config->length;
++      }
++}
++
++const struct ts_filter_api ts_filter_mean_api = {
++      .create =       ts_filter_mean_create,
++      .destroy =      ts_filter_mean_destroy,
++      .clear =        ts_filter_mean_clear,
++      .process =      ts_filter_mean_process,
++      .scale =        ts_filter_mean_scale,
++      .haspoint =     ts_filter_mean_haspoint,
++      .getpoint =     ts_filter_mean_getpoint,
++};
++EXPORT_SYMBOL_GPL(ts_filter_mean_api);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_mean.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_mean.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_mean.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_mean.h        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,28 @@
++#ifndef __TS_FILTER_MEAN_H__
++#define __TS_FILTER_MEAN_H__
++
++#include "ts_filter.h"
++
++/*
++ * Touchscreen filter.
++ *
++ * mean
++ *
++ * (c) 2008,2009
++ *     Andy Green <andy@openmoko.com>
++ *     Nelson Castillo <arhuaco@freaks-unidos.net>
++ */
++
++/* Configuration for this filter. */
++struct ts_filter_mean_configuration {
++      /* Number of points for the mean. */
++      int length;
++
++      /* Generic filter configuration. */
++      struct ts_filter_configuration config;
++};
++
++/* API functions for the mean filter */
++extern const struct ts_filter_api ts_filter_mean_api;
++
++#endif /* __TS_FILTER_MEAN_H__ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_median.c linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_median.c
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_median.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_median.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,261 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (c) 2008 Andy Green <andy@openmoko.com>
++ *
++ *
++ * Median averaging stuff.  We sort incoming raw samples into an array of
++ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
++ * We then return the sum of the middle three samples for X and Y.  It means
++ * the final result must be divided by (3 * scaling factor) to correct for
++ * avoiding the repeated /3.
++ *
++ * This strongly rejects brief excursions away from a central point that is
++ * sticky in time compared to the excursion duration.
++ *
++ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
++ * Halifinger who pointed out this would be a good method.
++ */
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include "ts_filter_median.h"
++
++struct ts_filter_median {
++      /* Private configuration. */
++      struct ts_filter_median_configuration *config;
++      /* Generic Filter API. */
++      struct ts_filter tsf;
++
++      /* Count raw samples we get. */
++      int samples_count;
++      /*
++       * Remember the last coordinates we got in order to know if
++       * we are moving slow or fast.
++       */
++      int last_issued[MAX_TS_FILTER_COORDS];
++      /* How many samples in the sort buffer are valid. */
++      int valid;
++      /* Samples taken for median in sorted form. */
++      int *sort[MAX_TS_FILTER_COORDS];
++      /* Samples taken for median. */
++      int *fifo[MAX_TS_FILTER_COORDS];
++      /* Where we are in the fifo sample memory. */
++      int pos;
++      /* Do we have a sample to deliver? */
++      int ready;
++};
++
++#define ts_filter_to_filter_median(f) \
++      container_of(f, struct ts_filter_median, tsf)
++
++
++static void ts_filter_median_insert(int *p, int sample, int count)
++{
++      int n;
++
++      /* Search through what we got so far to find where to put sample. */
++      for (n = 0; n < count; n++)
++              if (sample < p[n]) {    /* We met somebody bigger than us? */
++                      /* Starting from the end, push bigger guys down one. */
++                      for (count--; count >= n; count--)
++                              p[count + 1] = p[count];
++                      p[n] = sample; /* Put us in place of first bigger. */
++                      return;
++              }
++
++      p[count] = sample; /* Nobody was bigger than us, add us on the end. */
++}
++
++static void ts_filter_median_del(int *p, int value, int count)
++{
++      int index;
++
++      for (index = 0; index < count; index++)
++              if (p[index] == value) {
++                      for (; index < count; index++)
++                              p[index] = p[index + 1];
++                      return;
++              }
++}
++
++
++static void ts_filter_median_clear(struct ts_filter *tsf)
++{
++      struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
++
++      tsfm->pos = 0;
++      tsfm->valid = 0;
++      tsfm->ready = 0;
++      memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
++}
++
++static struct ts_filter *ts_filter_median_create(
++      struct platform_device *pdev,
++      const struct ts_filter_configuration *conf,
++      int count_coords)
++{
++      int *p;
++      int n;
++      struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
++                                                                  GFP_KERNEL);
++
++      if (!tsfm)
++              return NULL;
++
++      tsfm->config = container_of(conf,
++                                  struct ts_filter_median_configuration,
++                                  config);
++
++      tsfm->tsf.count_coords = count_coords;
++
++      tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
++
++      p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
++                  GFP_KERNEL);
++      if (!p) {
++              kfree(tsfm);
++              return NULL;
++      }
++
++      for (n = 0; n < count_coords; n++) {
++              tsfm->sort[n] = p;
++              p += tsfm->config->extent + 1;
++              tsfm->fifo[n] = p;
++              p += tsfm->config->extent + 1;
++      }
++
++      ts_filter_median_clear(&tsfm->tsf);
++
++      dev_info(&pdev->dev,
++               "Created Median filter len:%d coords:%d dec_threshold:%d\n",
++               tsfm->config->extent, count_coords,
++               tsfm->config->decimation_threshold);
++
++      return &tsfm->tsf;
++}
++
++static void ts_filter_median_destroy(struct ts_filter *tsf)
++{
++      struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
++
++      kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
++      kfree(tsf);
++}
++
++static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
++{
++      int n;
++
++      for (n = 0; n < tsf->count_coords; n++)
++              coords[n] = (coords[n] + 2) / 3;
++}
++
++/*
++ * Give us the raw sample data coords, and if we return 1 then you can
++ * get a filtered coordinate from coords. If we return 0 you didn't
++ * fill all the filters with samples yet.
++ */
++
++static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
++{
++      struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
++      int n;
++      int movement = 1;
++
++      for (n = 0; n < tsf->count_coords; n++) {
++              /* Grab copy in insertion order to remove when oldest. */
++              tsfm->fifo[n][tsfm->pos] = coords[n];
++              /* Insert these samples in sorted order in the median arrays. */
++              ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
++      }
++      /* Move us on in the fifo. */
++      if (++tsfm->pos == (tsfm->config->extent + 1))
++              tsfm->pos = 0;
++
++      /* Have we finished a median sampling? */
++      if (++tsfm->valid < tsfm->config->extent)
++              goto process_exit; /* No valid sample to use. */
++
++      BUG_ON(tsfm->valid != tsfm->config->extent);
++
++      tsfm->valid--;
++
++      /*
++       * Sum the middle 3 in the median sorted arrays. We don't divide back
++       * down which increases the sum resolution by a factor of 3 until the
++       * scale API function is called.
++       */
++      for (n = 0; n < tsf->count_coords; n++)
++              /* Perform the deletion of the oldest sample. */
++              ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
++                                   tsfm->valid);
++
++      tsfm->samples_count--;
++      if (tsfm->samples_count >= 0)
++              goto process_exit;
++
++      for (n = 0; n < tsf->count_coords; n++) {
++              /* Give the coordinate result from summing median 3. */
++              coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
++                          tsfm->sort[n][tsfm->config->midpoint] +
++                          tsfm->sort[n][tsfm->config->midpoint + 1];
++
++              movement += abs(tsfm->last_issued[n] - coords[n]);
++      }
++
++      if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
++              tsfm->samples_count = tsfm->config->decimation_above;
++      else
++              tsfm->samples_count = tsfm->config->decimation_below;
++
++      memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
++
++      tsfm->ready = 1;
++
++process_exit:
++      return 0;
++}
++
++static int ts_filter_median_haspoint(struct ts_filter *tsf)
++{
++      struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
++
++      return priv->ready;
++}
++
++static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
++{
++      struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
++
++      BUG_ON(!priv->ready);
++
++      memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
++
++      priv->ready = 0;
++}
++
++const struct ts_filter_api ts_filter_median_api = {
++      .create =       ts_filter_median_create,
++      .destroy =      ts_filter_median_destroy,
++      .clear =        ts_filter_median_clear,
++      .process =      ts_filter_median_process,
++      .scale =        ts_filter_median_scale,
++      .haspoint =     ts_filter_median_haspoint,
++      .getpoint =     ts_filter_median_getpoint,
++};
++EXPORT_SYMBOL_GPL(ts_filter_median_api);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_median.h linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_median.h
+--- linux-2.6.29-rc3.owrt/drivers/input/touchscreen/ts_filter_median.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/input/touchscreen/ts_filter_median.h      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,32 @@
++#ifndef __TS_FILTER_MEDIAN_H__
++#define __TS_FILTER_MEDIAN_H__
++
++#include "ts_filter.h"
++
++/*
++ * Touchscreen filter.
++ *
++ * median
++ *
++ * (c) 2008 Andy Green <andy@openmoko.com>
++ */
++
++struct ts_filter_median_configuration {
++      /* Size of the filter. */
++      int extent;
++      /* Precomputed midpoint. */
++      int midpoint;
++      /* A reference value for us to check if we are going fast or slow. */
++      int decimation_threshold;
++      /* How many points to replace if we're going fast. */
++      int decimation_above;
++      /* How many points to replace if we're going slow. */
++      int decimation_below;
++
++      /* Generic configuration. */
++      struct ts_filter_configuration config;
++};
++
++extern const struct ts_filter_api ts_filter_median_api;
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/Kconfig linux-2.6.29-rc3.owrt.om/drivers/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/Kconfig      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/Kconfig   2009-05-10 22:27:59.000000000 +0200
+@@ -109,4 +109,5 @@
+ source "drivers/staging/Kconfig"
+ source "drivers/platform/Kconfig"
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/Kconfig linux-2.6.29-rc3.owrt.om/drivers/leds/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/leds/Kconfig 2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/Kconfig      2009-05-10 22:27:59.000000000 +0200
+@@ -33,7 +33,7 @@
+ config LEDS_S3C24XX
+       tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+-      depends on LEDS_CLASS && ARCH_S3C2410
++      depends on LEDS_CLASS && ARCH_S3C2410 && S3C2410_PWM
+       help
+         This option enables support for LEDs connected to GPIO lines
+         on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
+@@ -171,6 +171,25 @@
+         This option enables support for on-chip LED drivers found
+         on Dialog Semiconductor DA9030/DA9034 PMICs.
++config LEDS_NEO1973_VIBRATOR
++      tristate "Vibrator Support for the FIC Neo1973 GSM phone"
++      depends on LEDS_CLASS && MACH_NEO1973
++      help
++        This option enables support for the vibrator on the FIC Neo1973.
++
++config LEDS_NEO1973_GTA02
++      tristate "LED Support for the FIC Neo1973 (GTA02)"
++      depends on LEDS_CLASS && MACH_NEO1973_GTA02
++      help
++        This option enables support for the LEDs on the FIC Neo1973.
++
++config LEDS_LP5521
++      tristate "LED Support for LP5521 LED I2C chip"
++      depends on LEDS_CLASS && I2C
++      help
++        If you say yes here you get support for the National Semiconductor
++        LP5521 LED driver.
++
+ comment "LED Triggers"
+ config LEDS_TRIGGERS
+@@ -234,4 +253,11 @@
+         This allows LEDs to be controlled by network device activity.
+         If unsure, say Y.
++config LEDS_TRIGGER_NETDEV
++      tristate "LED Network Device Trigger"
++      depends on LEDS_TRIGGERS
++      help
++        This allows LEDs to be controlled by Network Device activity.
++        If unsure, say Y.
++        
+ endif # NEW_LEDS
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/led-class.c linux-2.6.29-rc3.owrt.om/drivers/leds/led-class.c
+--- linux-2.6.29-rc3.owrt/drivers/leds/led-class.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/led-class.c  2009-05-10 22:27:59.000000000 +0200
+@@ -56,8 +56,10 @@
+       if (count == size) {
+               ret = count;
++#if 0 /* This is really bad. Don't do it!!!! */
+               if (state == LED_OFF)
+                       led_trigger_remove(led_cdev);
++#endif
+               led_set_brightness(led_cdev, state);
+       }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/leds-lp5521.c linux-2.6.29-rc3.owrt.om/drivers/leds/leds-lp5521.c
+--- linux-2.6.29-rc3.owrt/drivers/leds/leds-lp5521.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/leds-lp5521.c        2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,386 @@
++/* NS LP5521 Programmable LED driver.
++ *
++ * (C) 2009 by Openmoko, Inc.
++ * Author: Matt Hsu <matt_hsu@openmoko.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/mutex.h>
++#include <linux/device.h>
++#include <linux/sysfs.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include <linux/lp5521.h>
++
++#define LP5521_DRIVER_NAME              "lp5521"
++
++static int __lp5521_reg_write(struct lp5521 *lp, u8 reg, u8 value)
++{
++      return i2c_smbus_write_byte_data(lp->client, reg, value);
++}
++
++static int reg_write(struct lp5521 *lp, u_int8_t reg, u_int8_t val)
++{
++      int ret;
++
++      mutex_lock(&lp->lock);
++      ret = __lp5521_reg_write(lp, reg, val);
++      mutex_unlock(&lp->lock);
++
++      return ret;
++}
++
++static int __lp5521_reg_read(struct lp5521 *lp, u8 reg)
++{
++      int32_t ret;
++
++      ret = i2c_smbus_read_byte_data(lp->client, reg);
++
++      return ret;
++}
++
++static u_int8_t reg_read(struct lp5521 *lp, u_int8_t reg)
++{
++      int32_t ret;
++
++      mutex_lock(&lp->lock);
++      ret = __lp5521_reg_read(lp, reg);
++      mutex_unlock(&lp->lock);
++
++      return ret & 0xff;
++}
++
++static int reg_set_bit_mask(struct lp5521 *lp,
++                          u_int8_t reg, u_int8_t mask, u_int8_t val)
++{
++      int ret;
++      u_int8_t tmp;
++
++      val &= mask;
++
++      mutex_lock(&lp->lock);
++
++      tmp = __lp5521_reg_read(lp, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      ret = __lp5521_reg_write(lp, reg, tmp);
++
++      mutex_unlock(&lp->lock);
++
++      return ret;
++}
++
++static const char *lp5521_ch_name[] = {
++      "blue", "green", "red",
++};
++
++static inline int channel_id_by_name(const char *name)
++{
++      int channel_id = -1;
++
++      if (!strncmp(name, lp5521_ch_name[LP5521_BLUE],
++                              strlen(lp5521_ch_name[LP5521_BLUE])))
++              channel_id = LP5521_BLUE;
++      else if (!strncmp(name, lp5521_ch_name[LP5521_GREEN],
++                              strlen(lp5521_ch_name[LP5521_GREEN])))
++              channel_id = LP5521_GREEN;
++      else if (!strncmp(name, lp5521_ch_name[LP5521_RED],
++                              strlen(lp5521_ch_name[LP5521_RED])))
++              channel_id = LP5521_RED;
++
++      return channel_id;
++}
++
++static const char *lp5521_ch_mode[] = {
++      "disable", "load", "run",
++      "direct",
++};
++
++/*
++ * Individual mode control
++ */
++static ssize_t show_mode(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      int id;
++      uint8_t val;
++
++      id = channel_id_by_name(attr->attr.name);
++      val = reg_read(lp, LP5521_REG_OP_MODE);
++
++      val = val >> (id * 2);
++      val &= 0x3;
++
++      return sprintf(buf, "%s\n", lp5521_ch_mode[val]);
++}
++
++static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      int id;
++      uint8_t mask, i;
++
++      id = channel_id_by_name(attr->attr.name);
++
++      mask = (0x3 << (id * 2));
++
++      for (i = LP5521_MODE_DISABLE; i <= LP5521_MODE_DIRECT; i++) {
++              if (!strncmp(buf, lp5521_ch_mode[i], strlen(lp5521_ch_mode[i]))) {
++                      reg_set_bit_mask(lp,
++                              LP5521_REG_OP_MODE, mask, (i << (id * 2)));
++              }
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(red_mode, S_IRUGO | S_IWUSR, show_mode, set_mode);
++static DEVICE_ATTR(green_mode, S_IRUGO | S_IWUSR, show_mode, set_mode);
++static DEVICE_ATTR(blue_mode, S_IRUGO | S_IWUSR, show_mode, set_mode);
++
++/*
++ * Individual pwm control
++ */
++static ssize_t show_pwm(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      int id;
++      uint8_t val;
++
++      id = channel_id_by_name(attr->attr.name);
++      val = reg_read(lp, LP5521_REG_B_PWM-id);
++
++      return sprintf(buf, "%d\n", val);
++}
++
++static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      int id;
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      unsigned int pwm = simple_strtoul(buf, NULL, 10);
++
++      id = channel_id_by_name(attr->attr.name);
++      reg_write(lp, LP5521_REG_B_PWM-id, pwm);
++
++      return count;
++}
++
++static DEVICE_ATTR(red_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
++static DEVICE_ATTR(green_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
++static DEVICE_ATTR(blue_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
++
++/*
++ * Individual current control
++ */
++static ssize_t show_cur(struct device *dev, struct device_attribute
++                                      *attr, char *buf)
++{
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      int id;
++      uint8_t val;
++
++      id = channel_id_by_name(attr->attr.name);
++      val = reg_read(lp, LP5521_REG_B_CUR-id);
++
++      return sprintf(buf, "%d (100uA)\n", val);
++}
++
++static ssize_t set_cur(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      int id;
++      struct i2c_client *client = to_i2c_client(dev);
++      struct lp5521 *lp = i2c_get_clientdata(client);
++      unsigned int cur = simple_strtoul(buf, NULL, 10);
++
++      id = channel_id_by_name(attr->attr.name);
++      reg_write(lp, LP5521_REG_B_CUR-id, cur);
++
++      return count;
++}
++
++static DEVICE_ATTR(red_cur, S_IRUGO | S_IWUSR, show_cur, set_cur);
++static DEVICE_ATTR(green_cur, S_IRUGO | S_IWUSR, show_cur, set_cur);
++static DEVICE_ATTR(blue_cur, S_IRUGO | S_IWUSR, show_cur, set_cur);
++
++static struct attribute *lp_sysfs_entries[16];
++
++static struct attribute_group lp_attr_group = {
++      .name   = NULL,
++      .attrs  = lp_sysfs_entries,
++};
++
++static void populate_sysfs_group(struct lp5521 *lp)
++{
++      int i = 0;
++
++      if (lp->pdata->channels[LP5521_RED] & LP5521_CONNECTED) {
++              lp_sysfs_entries[i++] = &dev_attr_red_mode.attr;
++              lp_sysfs_entries[i++] = &dev_attr_red_pwm.attr;
++              lp_sysfs_entries[i++] = &dev_attr_red_cur.attr;
++      }
++
++      if (lp->pdata->channels[LP5521_GREEN] & LP5521_CONNECTED) {
++              lp_sysfs_entries[i++] = &dev_attr_green_mode.attr;
++              lp_sysfs_entries[i++] = &dev_attr_green_pwm.attr;
++              lp_sysfs_entries[i++] = &dev_attr_green_cur.attr;
++      }
++
++      if (lp->pdata->channels[LP5521_BLUE] & LP5521_CONNECTED) {
++              lp_sysfs_entries[i++] = &dev_attr_blue_mode.attr;
++              lp_sysfs_entries[i++] = &dev_attr_blue_pwm.attr;
++              lp_sysfs_entries[i++] = &dev_attr_blue_cur.attr;
++      }
++}
++
++static struct i2c_driver lp5521_driver;
++
++#ifdef CONFIG_PM
++static int lp5521_suspend(struct device *dev, pm_message_t state)
++{
++      /* FIXME: Not implemented
++       * Here we could upload firmware to perform
++       * any scenarios we want and save registers.
++       */
++      return 0;
++}
++
++static int lp5521_resume(struct device *dev)
++{
++      /* FIXME: Not implemented */
++      return 0;
++}
++#else
++#define lp5521_suspend NULL
++#define lp5521_resume NULL
++#endif
++
++static irqreturn_t lp5521_irq(int irq, void *_lp)
++{
++      struct lp5521 *lp = _lp;
++      dev_info(lp->dev, "lp5521 interrupt\n");
++
++      return IRQ_HANDLED;
++}
++
++static int __devinit
++lp5521_probe(struct i2c_client *client, const struct i2c_device_id *id)
++{
++      struct lp5521 *lp;
++      int ret = 0;
++      struct lp5521_platform_data *pdata = client->dev.platform_data;
++
++      lp = kzalloc(sizeof(*lp), GFP_KERNEL);
++      if (!lp)
++              return -ENOMEM;
++
++      lp->client = client;
++      lp->irq = client->irq;
++      lp->dev = &client->dev;
++      i2c_set_clientdata(client, lp);
++
++      lp->pdata = pdata;
++      mutex_init(&lp->lock);
++
++      /* enter start-up mode */
++      if (pdata->ext_enable)
++              (pdata->ext_enable)(1);
++
++      reg_write(lp, LP5521_REG_ENABLE, 0x40);
++
++      /* charge pump mode and clk src selection */
++      reg_write(lp, LP5521_REG_CONFIG, 0x11);
++
++      /* allocate IRQ resource */
++      if (lp->irq) {
++              ret = request_irq(client->irq, lp5521_irq,
++                              IRQF_TRIGGER_LOW, LP5521_DRIVER_NAME, lp);
++              if (ret) {
++                      dev_err(lp->dev, "request IRQ failed\n");
++                      goto fail;
++              }
++      } else {
++              dev_err(lp->dev, "No IRQ allocated \n");
++      }
++
++      populate_sysfs_group(lp);
++
++      ret = sysfs_create_group(&client->dev.kobj, &lp_attr_group);
++
++      if (ret) {
++              dev_err(lp->dev, "error creating sysfs group\n");
++              goto fail;
++      }
++
++      return ret;
++
++fail:
++      kfree(lp);
++      return ret;
++}
++
++static int __devexit lp5521_remove(struct i2c_client *client)
++{
++      struct lp5521 *lp = i2c_get_clientdata(client);
++
++      kfree(lp);
++
++      return 0;
++}
++
++static struct i2c_device_id lp5521_id[] = {
++      {LP5521_DRIVER_NAME, },
++};
++
++static struct i2c_driver lp5521_driver = {
++      .driver = {
++              .name   = LP5521_DRIVER_NAME,
++              .suspend = lp5521_suspend,
++              .resume = lp5521_resume,
++      },
++      .id_table       = lp5521_id,
++      .probe          = lp5521_probe,
++      .remove         = __exit_p(lp5521_remove),
++};
++
++static int __init lp5521_init(void)
++{
++      return i2c_add_driver(&lp5521_driver);
++}
++
++static void __exit lp5521_exit(void)
++{
++      i2c_del_driver(&lp5521_driver);
++}
++
++MODULE_AUTHOR("Matt Hsu <matt_hsu@openmoko.org>");
++MODULE_DESCRIPTION("NS lp5521 LED driver");
++MODULE_LICENSE("GPLv2");
++
++module_init(lp5521_init);
++module_exit(lp5521_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/leds-neo1973-gta02.c linux-2.6.29-rc3.owrt.om/drivers/leds/leds-neo1973-gta02.c
+--- linux-2.6.29-rc3.owrt/drivers/leds/leds-neo1973-gta02.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/leds-neo1973-gta02.c 2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,179 @@
++/*
++ * LED driver for the Openmoko GTA02 GSM phone
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <mach/gta02.h>
++#include <plat/regs-timer.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++#define MAX_LEDS 3
++#define COUNTER 256
++
++struct gta02_led_priv
++{
++      spinlock_t lock;
++      struct led_classdev cdev;
++      unsigned int gpio;
++};
++
++struct gta02_led_bundle
++{
++      int num_leds;
++      struct gta02_led_priv led[MAX_LEDS];
++};
++
++static inline struct gta02_led_priv *to_priv(struct led_classdev *led_cdev)
++{
++      return container_of(led_cdev, struct gta02_led_priv, cdev);
++}
++
++static inline struct gta02_led_bundle *to_bundle(struct led_classdev *led_cdev)
++{
++      return dev_get_drvdata(led_cdev->dev->parent);
++}
++
++static void gta02led_set(struct led_classdev *led_cdev,
++                       enum led_brightness value)
++{
++      unsigned long flags;
++      struct gta02_led_priv *lp = to_priv(led_cdev);
++
++      spin_lock_irqsave(&lp->lock, flags);
++      neo1973_gpb_setpin(lp->gpio, value ? 1 : 0);
++      spin_unlock_irqrestore(&lp->lock, flags);
++}
++
++#ifdef CONFIG_PM
++static int gta02led_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
++      int i;
++
++      for (i = 0; i < bundle->num_leds; i++)
++              led_classdev_suspend(&bundle->led[i].cdev);
++
++      return 0;
++}
++
++static int gta02led_resume(struct platform_device *pdev)
++{
++      struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
++      int i;
++
++      for (i = 0; i < bundle->num_leds; i++)
++              led_classdev_resume(&bundle->led[i].cdev);
++
++      return 0;
++}
++#endif
++
++static int __init gta02led_probe(struct platform_device *pdev)
++{
++      int i, rc;
++      struct gta02_led_bundle *bundle;
++
++      if (!machine_is_neo1973_gta02())
++              return -EIO;
++
++      bundle = kzalloc(sizeof(struct gta02_led_bundle), GFP_KERNEL);
++      if (!bundle)
++              return -ENOMEM;
++      platform_set_drvdata(pdev, bundle);
++
++      for (i = 0; i < pdev->num_resources; i++) {
++              struct gta02_led_priv *lp;
++              struct resource *r;
++
++              if (i >= MAX_LEDS)
++                      break;
++
++              r = platform_get_resource(pdev, 0, i);
++              if (!r || !r->start || !r->name)
++                      continue;
++
++              lp = &bundle->led[i];
++
++              lp->gpio = r->start;
++              lp->cdev.name = r->name;
++              lp->cdev.brightness_set = gta02led_set;
++
++              switch (lp->gpio) {
++              case S3C2410_GPB0:
++              case S3C2410_GPB1:
++              case S3C2410_GPB2:
++                      s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPIO_OUTPUT);
++                      neo1973_gpb_add_shadow_gpio(lp->gpio);
++                      break;
++              default:
++                      break;
++              }
++
++              spin_lock_init(&lp->lock);
++              rc = led_classdev_register(&pdev->dev, &lp->cdev);
++      }
++
++      bundle->num_leds = i;
++
++      return 0;
++}
++
++static int gta02led_remove(struct platform_device *pdev)
++{
++      struct gta02_led_bundle *bundle = platform_get_drvdata(pdev);
++      int i;
++
++      for (i = 0; i < bundle->num_leds; i++) {
++              struct gta02_led_priv *lp = &bundle->led[i];
++              gta02led_set(&lp->cdev, 0);
++              led_classdev_unregister(&lp->cdev);
++      }
++
++      platform_set_drvdata(pdev, NULL);
++      kfree(bundle);
++
++      return 0;
++}
++
++static struct platform_driver gta02led_driver = {
++      .probe          = gta02led_probe,
++      .remove         = gta02led_remove,
++#ifdef CONFIG_PM
++      .suspend        = gta02led_suspend,
++      .resume         = gta02led_resume,
++#endif
++      .driver         = {
++              .name           = "gta02-led",
++      },
++};
++
++static int __init gta02led_init(void)
++{
++      return platform_driver_register(&gta02led_driver);
++}
++
++static void __exit gta02led_exit(void)
++{
++      platform_driver_unregister(&gta02led_driver);
++}
++
++module_init(gta02led_init);
++module_exit(gta02led_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Openmoko GTA02 LED driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/leds-neo1973-vibrator.c linux-2.6.29-rc3.owrt.om/drivers/leds/leds-neo1973-vibrator.c
+--- linux-2.6.29-rc3.owrt/drivers/leds/leds-neo1973-vibrator.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/leds-neo1973-vibrator.c      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,241 @@
++/*
++ * LED driver for the vibrator of the Openmoko GTA01/GTA02 GSM Phones
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Javi Roman <javiroman@kernel-labs.org>:
++ *    Implement PWM support for GTA01Bv4 and later
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <plat/pwm.h>
++#include <mach/gta01.h>
++#include <plat/regs-timer.h>
++#include <linux/neo1973_vibrator.h>
++
++#include <asm/plat-s3c24xx/neo1973.h>
++
++#define COUNTER 64
++
++static struct neo1973_vib_priv {
++      struct led_classdev cdev;
++      unsigned int gpio;
++      spinlock_t lock;
++      unsigned int has_pwm;
++      struct s3c2410_pwm pwm;
++      
++      unsigned long vib_gpio_pin; /* which pin to meddle with */
++      u8 vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */
++      u8 vib_pwm_latched;
++      u32 fiq_count;
++
++      struct neo1973_vib_platform_data *pdata;
++} neo1973_vib_priv;
++
++int neo1973_vibrator_fiq_handler(void)
++{
++      neo1973_vib_priv.fiq_count++;
++
++      if (!neo1973_vib_priv.vib_pwm_latched && !neo1973_vib_priv.vib_pwm)
++              /* idle */
++              return 0;
++
++      if ((u8)neo1973_vib_priv.fiq_count == neo1973_vib_priv.vib_pwm_latched)
++              neo1973_gpb_setpin(neo1973_vib_priv.vib_gpio_pin, 0);
++
++      if ((u8)neo1973_vib_priv.fiq_count)
++              return 1;
++
++      neo1973_vib_priv.vib_pwm_latched = neo1973_vib_priv.vib_pwm;
++      if (neo1973_vib_priv.vib_pwm_latched)
++              neo1973_gpb_setpin(neo1973_vib_priv.vib_gpio_pin, 1);
++
++      return 1;
++}
++
++static void neo1973_vib_vib_set(struct led_classdev *led_cdev,
++                              enum led_brightness value)
++{
++      unsigned long flags;
++      struct neo1973_vib_priv *vp = container_of(led_cdev,
++                                                 struct neo1973_vib_priv,
++                                                 cdev);
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++      if (machine_is_neo1973_gta02()) { /* use FIQ to control GPIO */
++              neo1973_vib_priv.vib_pwm = value; /* set it for FIQ */
++              neo1973_vib_priv.pdata->kick_fiq(); /* start up FIQs if not already going */
++              return;
++      }
++#endif
++      /*
++       * value == 255 -> 99% duty cycle (full power)
++       * value == 128 -> 50% duty cycle (medium power)
++       * value == 0 -> 0% duty cycle (zero power)
++       */
++      spin_lock_irqsave(&vp->lock, flags);
++
++      if (vp->has_pwm)
++              s3c2410_pwm_duty_cycle(value / 4, &vp->pwm);
++      else
++              neo1973_gpb_setpin(vp->gpio, value ? 1 : 0);
++
++      spin_unlock_irqrestore(&vp->lock, flags);
++}
++
++static struct neo1973_vib_priv neo1973_vib_led = {
++      .cdev = {
++              .name = "neo1973:vibrator",
++              .brightness_set = neo1973_vib_vib_set,
++      },
++};
++
++static int neo1973_vib_init_hw(struct neo1973_vib_priv *vp)
++{
++      int rc;
++
++      rc = s3c2410_pwm_init(&vp->pwm);
++      if (rc)
++              return rc;
++
++      vp->pwm.timerid = PWM3;
++      /* use same prescaler as arch/arm/plat-s3c24xx/time.c */
++      vp->pwm.prescaler = (6 - 1) / 2;
++      vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2;
++      vp->pwm.counter = COUNTER;
++      vp->pwm.comparer = COUNTER;
++
++      rc = s3c2410_pwm_enable(&vp->pwm);
++      if (rc)
++              return rc;
++
++      s3c2410_pwm_start(&vp->pwm);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int neo1973_vib_suspend(struct platform_device *dev, pm_message_t state)
++{
++      led_classdev_suspend(&neo1973_vib_led.cdev);
++      if (neo1973_vib_priv.pdata)
++              neo1973_vib_priv.pdata->disable_fiq();
++      return 0;
++}
++
++static int neo1973_vib_resume(struct platform_device *dev)
++{
++      struct neo1973_vib_priv *vp = platform_get_drvdata(dev);
++
++      if (vp->has_pwm)
++              neo1973_vib_init_hw(vp);
++
++      led_classdev_resume(&neo1973_vib_led.cdev);
++      if (neo1973_vib_priv.pdata)
++              neo1973_vib_priv.pdata->enable_fiq();
++
++      return 0;
++}
++#endif /* CONFIG_PM */
++
++static int __init neo1973_vib_probe(struct platform_device *pdev)
++{
++      struct resource *r;
++      int rc;
++
++      if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02())
++              return -EIO;
++
++      r = platform_get_resource(pdev, 0, 0);
++      if (!r || !r->start)
++              return -EIO;
++
++      neo1973_vib_led.gpio = r->start;
++
++      neo1973_vib_priv.pdata = pdev->dev.platform_data;
++      platform_set_drvdata(pdev, &neo1973_vib_led);
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++      if (machine_is_neo1973_gta02()) { /* use FIQ to control GPIO */
++              neo1973_gpb_setpin(neo1973_vib_led.gpio, 0); /* off */
++              s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPIO_OUTPUT);
++              /* safe, kmalloc'd copy needed for FIQ ISR */
++              neo1973_vib_priv.vib_gpio_pin = neo1973_vib_led.gpio;
++              neo1973_vib_priv.vib_pwm = 0; /* off */
++              goto configured;
++      }
++#endif
++
++      /* TOUT3 */
++      if (neo1973_vib_led.gpio == S3C2410_GPB3) {
++              rc = neo1973_vib_init_hw(&neo1973_vib_led);
++              if (rc)
++                      return rc;
++
++              s3c2410_pwm_duty_cycle(0, &neo1973_vib_led.pwm);
++              s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPB3_TOUT3);
++              neo1973_vib_led.has_pwm = 1;
++      }
++#ifdef CONFIG_MACH_NEO1973_GTA02
++configured:
++#endif
++      spin_lock_init(&neo1973_vib_led.lock);
++
++      return led_classdev_register(&pdev->dev, &neo1973_vib_led.cdev);
++}
++
++static int neo1973_vib_remove(struct platform_device *pdev)
++{
++#ifdef CONFIG_MACH_NEO1973_GTA02
++      if (machine_is_neo1973_gta02()) /* use FIQ to control GPIO */
++              neo1973_vib_priv.vib_pwm = 0; /* off */
++      /* would only need kick if already off so no kick needed */
++#endif
++
++      if (neo1973_vib_led.has_pwm)
++              s3c2410_pwm_disable(&neo1973_vib_led.pwm);
++
++      led_classdev_unregister(&neo1973_vib_led.cdev);
++
++      return 0;
++}
++
++static struct platform_driver neo1973_vib_driver = {
++      .probe          = neo1973_vib_probe,
++      .remove         = neo1973_vib_remove,
++#ifdef CONFIG_PM
++      .suspend        = neo1973_vib_suspend,
++      .resume         = neo1973_vib_resume,
++#endif
++      .driver         = {
++              .name           = "neo1973-vibrator",
++      },
++};
++
++static int __init neo1973_vib_init(void)
++{
++      return platform_driver_register(&neo1973_vib_driver);
++}
++
++static void __exit neo1973_vib_exit(void)
++{
++      platform_driver_unregister(&neo1973_vib_driver);
++}
++
++module_init(neo1973_vib_init);
++module_exit(neo1973_vib_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Openmoko GTA01/GTA02 vibrator driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/leds/Makefile linux-2.6.29-rc3.owrt.om/drivers/leds/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/leds/Makefile        2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/leds/Makefile     2009-05-10 22:27:59.000000000 +0200
+@@ -24,11 +24,15 @@
+ obj-$(CONFIG_LEDS_PCA955X)            += leds-pca955x.o
+ obj-$(CONFIG_LEDS_DA903X)             += leds-da903x.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
++obj-$(CONFIG_LEDS_NEO1973_VIBRATOR)   += leds-neo1973-vibrator.o
++obj-$(CONFIG_LEDS_NEO1973_GTA02)      += leds-neo1973-gta02.o
++obj-$(CONFIG_LEDS_LP5521)             += leds-lp5521.o
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
+ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)   += ledtrig-ide-disk.o
+ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)  += ledtrig-heartbeat.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)  += ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/Makefile linux-2.6.29-rc3.owrt.om/drivers/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/Makefile     2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/Makefile  2009-05-10 22:27:59.000000000 +0200
+@@ -90,6 +90,7 @@
+ obj-y                         += idle/
+ obj-$(CONFIG_MMC)             += mmc/
+ obj-$(CONFIG_MEMSTICK)                += memstick/
++obj-$(CONFIG_AR6000_WLAN)     += ar6000/
+ obj-$(CONFIG_NEW_LEDS)                += leds/
+ obj-$(CONFIG_INFINIBAND)      += infiniband/
+ obj-$(CONFIG_SGI_SN)          += sn/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/Kconfig linux-2.6.29-rc3.owrt.om/drivers/media/video/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/media/video/Kconfig  2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/Kconfig       2009-05-10 22:27:59.000000000 +0200
+@@ -711,6 +711,25 @@
+         CMOS camera controller.  This is the controller found on first-
+         generation OLPC systems.
++config VIDEO_SAMSUNG
++      bool "S3C SMDK CAMERA support"
++      depends on VIDEO_V4L2
++
++      default n
++      ---help---
++        TBA
++
++choice
++depends on VIDEO_SAMSUNG
++prompt "Select CIS module type"
++default VIDEO_SAMSUNG_S5K3BA
++
++config VIDEO_SAMSUNG_S5K4BA
++      bool "S5K4BA (2.0M CIS module, 1600x1200)"
++      ---help---
++        TBA
++endchoice
++
+ config SOC_CAMERA
+       tristate "SoC camera support"
+       depends on VIDEO_V4L2 && HAS_DMA
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/Makefile linux-2.6.29-rc3.owrt.om/drivers/media/video/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/media/video/Makefile 2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/Makefile      2009-05-10 22:27:59.000000000 +0200
+@@ -134,6 +134,8 @@
+ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+ obj-$(CONFIG_VIDEO_CX23885) += cx23885/
++obj-$(CONFIG_VIDEO_SAMSUNG)   += s3c_camera_driver.o s3c_camif.o samsung/
++
+ obj-$(CONFIG_VIDEO_PXA27x)    += pxa_camera.o
+ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)     += sh_mobile_ceu_camera.o
+ obj-$(CONFIG_VIDEO_OMAP2)             += omap2cam.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camera_driver.c linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camera_driver.c
+--- linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camera_driver.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camera_driver.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1943 @@
++/* drivers/media/video/s3c_camera_driver.c
++ *
++ * Copyright (c) 2008 Samsung Electronics
++ *
++ * Samsung S3C Camera driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/kernel.h>
++#include <linux/major.h>
++#include <linux/slab.h>
++#include <linux/poll.h>
++#include <linux/signal.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/kmod.h>
++#include <linux/vmalloc.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/mm.h>
++#include <linux/videodev2.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/semaphore.h>
++#include <asm/io.h>
++#include <asm/page.h>
++#include <plat/regs-gpio.h>
++#include <plat/regs-camif.h>
++#include <media/v4l2-dev.h>
++#include <media/v4l2-ioctl.h>
++#include "s3c_camif.h"
++#include "videodev2_s3c.h"
++
++#include <linux/mfd/pcf50633/core.h>  /* @@@ hack - WA */
++#include <plat/gpio-bank-f.h>
++#include <plat/gpio-cfg.h>
++#include <mach/gpio.h>
++#include <mach/map.h>
++#include <plat/regs-sys.h>
++#include <plat/regs-syscon-power.h>
++
++
++static struct clk *cam_clock;
++camif_cfg_t s3c_fimc[CAMIF_DEV_NUM];
++extern camif_cis_t msdma_input;
++extern int s3c_camif_do_postprocess(camif_cfg_t *cfg);
++
++/*************************************************************************
++ * Utility part
++ ************************************************************************/
++camif_cfg_t *s3c_camif_get_fimc_object(int nr)
++{
++      camif_cfg_t *ret = NULL;
++
++      switch (nr) {
++      case CODEC_MINOR:
++              ret = &s3c_fimc[FIMC_CODEC_INDEX];
++              break;
++
++      case PREVIEW_MINOR:
++              ret = &s3c_fimc[FIMC_PREVIEW_INDEX];
++              break;
++
++      default:
++              printk(KERN_ERR "Unknown minor number\n");
++              ret = &s3c_fimc[FIMC_PREVIEW_INDEX];
++      }
++
++      return ret;
++}
++
++#if defined(FSM_ON_PREVIEW)
++static int s3c_camif_check_global_status(camif_cfg_t *cfg)
++{
++      int ret = 0;
++
++      if (down_interruptible(&cfg->cis->lock))
++              return -ERESTARTSYS;
++
++      if (cfg->cis->status & CWANT2START) {
++              cfg->cis->status &= ~CWANT2START;
++              cfg->auto_restart = 1;
++              ret = 1;
++      } else {
++              ret = 0;                /* There is no codec */
++              cfg->auto_restart = 0;  /* Duplicated ..Dummy */
++      }
++
++      up(&cfg->cis->lock);
++
++      return ret;
++}
++#endif
++
++static int s3c_camif_convert_format(int pixfmt, int *fmtptr)
++{
++      int fmt = CAMIF_YCBCR420;
++      int depth = 12;
++
++      switch (pixfmt) {
++      case V4L2_PIX_FMT_RGB565:
++      case V4L2_PIX_FMT_RGB565X:
++              fmt = CAMIF_RGB16;
++              depth = 16;
++              break;
++
++      case V4L2_PIX_FMT_BGR24: /* Not tested */
++      case V4L2_PIX_FMT_RGB24:
++              fmt = CAMIF_RGB24;
++              depth = 24;
++              break;
++
++      case V4L2_PIX_FMT_BGR32:
++      case V4L2_PIX_FMT_RGB32:
++              fmt = CAMIF_RGB24;
++              depth = 32;
++              break;
++
++      case V4L2_PIX_FMT_GREY: /* Not tested  */
++              fmt = CAMIF_YCBCR420;
++              depth = 8;
++              break;
++
++      case V4L2_PIX_FMT_YUYV:
++      case V4L2_PIX_FMT_UYVY:
++              fmt = CAMIF_YCBCR422I;
++              depth = 16;
++              break;
++
++      case V4L2_PIX_FMT_YUV422P:
++              fmt = CAMIF_YCBCR422;
++              depth = 16;
++              break;
++
++      case V4L2_PIX_FMT_YUV420:
++              fmt = CAMIF_YCBCR420;
++              depth = 12;
++              break;
++      }
++
++      if (fmtptr)
++              *fmtptr = fmt;
++
++      return depth;
++}
++
++static int s3c_camif_set_fb_info(camif_cfg_t *cfg, int depth, int fourcc)
++{
++      /* To define v4l2_format used currently */
++      cfg->v2.frmbuf.fmt.width = cfg->target_x;
++      cfg->v2.frmbuf.fmt.height = cfg->target_y;
++      cfg->v2.frmbuf.fmt.field = V4L2_FIELD_NONE;
++      cfg->v2.frmbuf.fmt.pixelformat = fourcc;
++      cfg->v2.frmbuf.fmt.bytesperline = cfg->v2.frmbuf.fmt.width * depth >> 3;
++      cfg->v2.frmbuf.fmt.sizeimage =
++          cfg->v2.frmbuf.fmt.height * cfg->v2.frmbuf.fmt.bytesperline;
++
++      return 0;
++}
++
++static int s3c_camif_convert_type(camif_cfg_t *cfg, int f)
++{
++      int pixfmt;
++
++      cfg->target_x = cfg->v2.frmbuf.fmt.width;
++      cfg->target_y = cfg->v2.frmbuf.fmt.height;
++
++      s3c_camif_convert_format(cfg->v2.frmbuf.fmt.pixelformat, &pixfmt);
++
++      cfg->dst_fmt = pixfmt;
++
++      return 0;
++}
++
++/*************************************************************************
++ * Control part
++ ************************************************************************/
++static int s3c_camif_start_capture(camif_cfg_t * cfg)
++{
++      int ret = 0;
++
++      cfg->capture_enable = CAMIF_DMA_ON;
++
++      s3c_camif_start_dma(cfg);
++
++      cfg->status = CAMIF_STARTED;
++
++      if (!(cfg->fsm == CAMIF_SET_LAST_INT ||
++          cfg->fsm == CAMIF_CONTINUOUS_INT)) {
++              cfg->fsm = CAMIF_DUMMY_INT;
++              cfg->perf.frames = 0;
++      }
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++      if (cfg->input_channel == MSDMA_FROM_CODEC)
++              s3c_camif_start_codec_msdma(cfg);
++#endif
++      return ret;
++}
++
++ssize_t s3c_camif_start_preview(camif_cfg_t *cfg)
++{
++      cfg->capture_enable = CAMIF_DMA_ON;
++
++      s3c_camif_start_dma(cfg);
++
++      cfg->status = CAMIF_STARTED;
++      cfg->fsm = CAMIF_1st_INT;
++      cfg->perf.frames = 0;
++
++      return 0;
++}
++
++ssize_t s3c_camif_stop_preview(camif_cfg_t *cfg)
++{
++      cfg->capture_enable = CAMIF_DMA_OFF;
++      cfg->status = CAMIF_STOPPED;
++
++      s3c_camif_stop_dma(cfg);
++
++      cfg->perf.frames = 0;
++
++      return 0;
++}
++
++ssize_t s3c_camif_stop_capture(camif_cfg_t *cfg)
++{
++      cfg->capture_enable = CAMIF_DMA_OFF;
++      cfg->status = CAMIF_STOPPED;
++
++      s3c_camif_stop_dma(cfg);
++
++      cfg->perf.frames = 0;
++
++      return 0;
++}
++
++ssize_t s3c_camif_stop_fimc(camif_cfg_t *cfg)
++{
++      cfg->capture_enable = CAMIF_BOTH_DMA_OFF;
++      cfg->fsm = CAMIF_DUMMY_INT;
++      cfg->perf.frames = 0;
++
++      s3c_camif_stop_dma(cfg);
++
++      return 0;
++}
++
++#if defined(FSM_ON_PREVIEW)
++static void s3c_camif_start_preview_with_codec(camif_cfg_t *cfg)
++{
++      camif_cfg_t *other = cfg->other;
++
++      /* Preview Stop */
++      cfg->capture_enable = CAMIF_DMA_OFF;
++      s3c_camif_stop_dma(cfg);
++
++      /* Start Preview and CODEC */
++      cfg->capture_enable =CAMIF_BOTH_DMA_ON;
++
++      s3c_camif_start_dma(cfg);
++      cfg->fsm = CAMIF_1st_INT; /* For Preview */
++
++      if (!other)
++              panic("Unexpected error: other is null\n");
++
++      switch (other->pp_num) {
++      case 4:
++              other->fsm = CAMIF_1st_INT; /* For CODEC */
++              break;
++
++      case 1:
++              other->fsm = CAMIF_Yth_INT;
++              break;
++
++      default:
++              panic("Invalid pingpong number");
++              break;
++      }
++}
++
++static void s3c_camif_auto_restart(camif_cfg_t *cfg)
++{
++      if (cfg->auto_restart)
++              s3c_camif_start_preview_with_codec(cfg);
++}
++#endif
++
++static void s3c_camif_change_mode(camif_cfg_t *cfg, int mode)
++{
++      camif_cis_t *cis = cfg->cis;
++      int res;
++
++      if (mode == SENSOR_MAX) {
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K3AA)
++              res = SENSOR_SXGA;
++#elif defined(CONFIG_VIDEO_SAMSUNG_S5K3BA)
++              res = SENSOR_UXGA;
++
++/* 4BA max is UXGA, but we don't have UXGA control values */
++#elif defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++              res = SENSOR_SVGA;
++#endif
++      } else if (mode == SENSOR_DEFAULT) {
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++              res = SENSOR_SVGA;
++#else
++              res = SENSOR_VGA;
++#endif
++      } else
++              res = mode;
++
++      s3c_camif_stop_fimc(cfg);
++
++      switch (res) {
++      case SENSOR_SXGA:
++              printk(KERN_INFO
++                  "Resolution changed into SXGA (1280x1024) mode -> 1.3M\n");
++              cis->sensor->driver->command(cis->sensor, SENSOR_SXGA, NULL);
++              cis->source_x = 1280;
++              cis->source_y = 1024;
++              break;
++
++      case SENSOR_UXGA:
++              printk(KERN_INFO
++                  "Resolution changed into UXGA (1600x1200) mode -> 2.0M\n");
++              cis->sensor->driver->command(cis->sensor, SENSOR_UXGA, NULL);
++              cis->source_x = 1600;
++              cis->source_y = 1200;
++              break;
++
++      case SENSOR_SVGA:
++              printk(KERN_INFO
++                  "Resolution changed back to SVGA (800x600) mode\n");
++              cis->sensor->driver->command(cis->sensor, SENSOR_SVGA, NULL);
++              cis->source_x = 800;
++              cis->source_y = 600;
++              break;
++
++      case SENSOR_VGA:
++              printk(KERN_INFO "Resolution changed back to VGA (640x480) "
++                  "mode (default)\n");
++              cis->sensor->driver->command(cis->sensor, SENSOR_VGA, NULL);
++              cis->source_x = 640;
++              cis->source_y = 480;
++              break;
++      }
++
++      cis->win_hor_ofst = cis->win_hor_ofst2 = 0;
++      cis->win_ver_ofst = cis->win_ver_ofst2 = 0;
++
++      s3c_camif_set_source_format(cis);
++}
++
++static int s3c_camif_check_zoom_range(camif_cfg_t *cfg, int type)
++{
++      switch (type) {
++      case V4L2_CID_ZOOMIN:
++              if (((cfg->sc.modified_src_x - (cfg->cis->win_hor_ofst +
++                  ZOOM_AT_A_TIME_IN_PIXELS + cfg->cis->win_hor_ofst2 +
++                  ZOOM_AT_A_TIME_IN_PIXELS)) / cfg->sc.prehratio) >
++                  ZOOM_IN_MAX) {
++                      printk(KERN_INFO "Invalid Zoom-in: this zoom-in on "
++                          "preview scaler already comes to the maximum\n");
++                      return 0;
++              }
++
++              cfg->sc.zoom_in_cnt++;
++              break;
++
++      case V4L2_CID_ZOOMOUT:
++              if (cfg->sc.zoom_in_cnt > 0) {
++                      cfg->sc.zoom_in_cnt--;
++              } else {
++                      printk(KERN_INFO "Invalid Zoom-out: this zoom-out on "
++                          "preview scaler already comes to the minimum\n");
++                      return 0;
++              }
++
++              break;
++
++      default:
++              break;
++      }
++
++      return 1;
++}
++
++static int s3c_camif_restart_preview(camif_cfg_t *cfg)
++{
++      int ret = 0;
++
++      s3c_camif_stop_preview(cfg);
++
++      if (s3c_camif_control_fimc(cfg)) {
++              printk(KERN_ERR "S3C fimc control failed\n");
++              ret = -1;
++      }
++
++      s3c_camif_start_preview(cfg);
++
++      return ret;
++}
++
++static int s3c_camif_send_sensor_command(camif_cfg_t *cfg, unsigned int cmd,
++    int arg)
++{
++      cfg->cis->sensor->driver->command(cfg->cis->sensor, cmd, (void *) arg);
++
++      return 0;
++}
++
++/*************************************************************************
++ * V4L2 part
++ ************************************************************************/
++static int s3c_camif_v4l2_querycap(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_capability *cap = arg;
++
++      strcpy(cap->driver, "S3C FIMC Camera driver");
++      strlcpy(cap->card, cfg->v->name, sizeof(cap->card));
++      sprintf(cap->bus_info, "FIMC AHB Bus");
++
++      cap->version = 0;
++      cap->capabilities = V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VIDEO_CAPTURE |
++          V4L2_CAP_STREAMING;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_g_fbuf(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_framebuffer *fb = arg;
++
++      *fb = cfg->v2.frmbuf;
++
++      fb->base = cfg->v2.frmbuf.base;
++      fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
++
++      fb->fmt.pixelformat  = cfg->v2.frmbuf.fmt.pixelformat;
++      fb->fmt.width = cfg->v2.frmbuf.fmt.width;
++      fb->fmt.height = cfg->v2.frmbuf.fmt.height;
++      fb->fmt.bytesperline = cfg->v2.frmbuf.fmt.bytesperline;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_fbuf(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_framebuffer *fb = arg;
++      int i, depth;
++
++      for (i = 0; i < NUMBER_OF_PREVIEW_FORMATS; i++)
++              if (fimc_preview_formats[i].pixelformat == fb->fmt.pixelformat)
++                      break;
++
++      if (i == NUMBER_OF_PREVIEW_FORMATS)
++              return -EINVAL;
++
++      cfg->v2.frmbuf.base  = fb->base;
++      cfg->v2.frmbuf.flags = fb->flags;
++      cfg->v2.frmbuf.capability = fb->capability;
++
++      cfg->target_x = fb->fmt.width;
++      cfg->target_y = fb->fmt.height;
++
++      depth = s3c_camif_convert_format(fb->fmt.pixelformat,
++          (int *) &cfg->dst_fmt);
++      s3c_camif_set_fb_info(cfg, depth, fb->fmt.pixelformat);
++
++      return s3c_camif_control_fimc(cfg);
++}
++
++static int s3c_camif_v4l2_g_fmt(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_format *f = arg;
++      int size = sizeof(struct v4l2_pix_format);
++      int ret = -1;
++
++      switch (f->type) {
++      case V4L2_BUF_TYPE_VIDEO_CAPTURE:
++              memset(&f->fmt.pix, 0, size);
++              memcpy(&f->fmt.pix, &cfg->v2.frmbuf.fmt, size);
++              ret = 0;
++              break;
++
++      default:
++              break;
++      }
++
++      return ret;
++}
++
++static int s3c_camif_v4l2_s_fmt(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_format *f = arg;
++      int ret = -1;
++
++      switch (f->type) {
++      case V4L2_BUF_TYPE_VIDEO_CAPTURE:
++              cfg->v2.frmbuf.fmt = f->fmt.pix;
++              cfg->v2.status |= CAMIF_v4L2_DIRTY;
++              cfg->v2.status &= ~CAMIF_v4L2_DIRTY; /* dummy ? */
++
++              s3c_camif_convert_type(cfg, 1);
++              s3c_camif_control_fimc(cfg);
++              ret = 0;
++              break;
++
++      default:
++              break;
++      }
++
++      return ret;
++}
++
++static int s3c_camif_v4l2_enum_fmt(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_fmtdesc *f = arg;
++      int index = f->index;
++
++      if (index >= NUMBER_OF_CODEC_FORMATS)
++              return -EINVAL;
++
++      switch (f->type) {
++      case V4L2_BUF_TYPE_VIDEO_CAPTURE:
++              break;
++
++      case V4L2_BUF_TYPE_VIDEO_OVERLAY:
++      default:
++              return -EINVAL;
++      }
++
++      memset(f, 0, sizeof(*f));
++      memcpy(f, cfg->v2.fmtdesc + index, sizeof(*f));
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_overlay(camif_cfg_t *cfg, void *arg)
++{
++      int on = *(int *) arg;
++
++      if (on)
++              return s3c_camif_start_preview(cfg);
++      else
++              return s3c_camif_stop_preview(cfg);
++}
++
++static int s3c_camif_v4l2_g_ctrl(camif_cfg_t *cfg, void *arg)
++{
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_ctrl(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_control *ctrl = arg;
++
++      switch (ctrl->id) {
++              case V4L2_CID_ORIGINAL:
++              case V4L2_CID_ARBITRARY:
++              case V4L2_CID_NEGATIVE:
++              case V4L2_CID_EMBOSSING:
++              case V4L2_CID_ART_FREEZE:
++              case V4L2_CID_SILHOUETTE:
++                      cfg->effect = ctrl->value;
++                      s3c_camif_change_effect(cfg);
++                      break;
++
++              case V4L2_CID_HFLIP:
++                      cfg->flip = CAMIF_FLIP_X;
++                      s3c_camif_change_flip(cfg);
++                      break;
++
++              case V4L2_CID_VFLIP:
++                      cfg->flip = CAMIF_FLIP_Y;
++                      s3c_camif_change_flip(cfg);
++                      break;
++
++              case V4L2_CID_ROTATE_180:
++                      cfg->flip = CAMIF_FLIP_MIRROR;
++                      s3c_camif_change_flip(cfg);
++                      break;
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++              case V4L2_CID_ROTATE_90:
++                      cfg->flip = CAMIF_ROTATE_90;
++                      s3c_camif_change_flip(cfg);
++                      break;
++
++              case V4L2_CID_ROTATE_270:
++                      cfg->flip = CAMIF_FLIP_ROTATE_270;
++                      s3c_camif_change_flip(cfg);
++                      break;
++#endif
++
++              case V4L2_CID_ROTATE_BYPASS:
++                      cfg->flip = CAMIF_FLIP;
++                      s3c_camif_change_flip(cfg);
++                      break;
++
++              case V4L2_CID_ZOOMIN:
++                      if (!s3c_camif_check_zoom_range(cfg, ctrl->id))
++                              break;
++                      cfg->cis->win_hor_ofst += ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_ver_ofst += ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_hor_ofst2 += ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_ver_ofst2 += ZOOM_AT_A_TIME_IN_PIXELS;
++
++                      s3c_camif_restart_preview(cfg);
++
++                      break;
++
++              case V4L2_CID_ZOOMOUT:
++                      if (!s3c_camif_check_zoom_range(cfg, ctrl->id))
++                              break;
++                      cfg->cis->win_hor_ofst -= ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_ver_ofst -= ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_hor_ofst2 -= ZOOM_AT_A_TIME_IN_PIXELS;
++                      cfg->cis->win_ver_ofst2 -= ZOOM_AT_A_TIME_IN_PIXELS;
++
++                      s3c_camif_restart_preview(cfg);
++
++                      break;
++
++              case V4L2_CID_CONTRAST:
++              case V4L2_CID_AUTO_WHITE_BALANCE:
++                      s3c_camif_send_sensor_command(cfg, SENSOR_WB,
++                          ctrl->value);
++                      break;
++
++              default:
++                      printk(KERN_ERR "Invalid control id: %d\n", ctrl->id);
++                      return -1;
++      }
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_streamon(camif_cfg_t *cfg, void *arg)
++{
++      return s3c_camif_start_capture(cfg);
++}
++
++static int s3c_camif_v4l2_streamoff(camif_cfg_t *cfg, void *arg)
++{
++      cfg->cis->status &= ~C_WORKING;
++
++      s3c_camif_stop_capture(cfg);
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_g_input(camif_cfg_t *cfg, void *arg)
++{
++      unsigned int *index = arg;
++
++      *index = cfg->v2.input->index;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_input(camif_cfg_t *cfg, unsigned int index)
++{
++      int ret = -1;
++
++      if (index >= NUMBER_OF_INPUTS)
++              ret = -1;
++      else {
++              cfg->v2.input = &fimc_inputs[index];
++
++              if (cfg->v2.input->type == V4L2_INPUT_TYPE_MSDMA) {
++                      if (cfg->dma_type & CAMIF_PREVIEW) {
++                              cfg->input_channel = MSDMA_FROM_PREVIEW;
++                              ret = 0;
++                      } else if (cfg->dma_type & CAMIF_CODEC) {
++                              cfg->input_channel = MSDMA_FROM_CODEC;
++                              ret = 0;
++                      }
++              } else {
++                      cfg->input_channel = CAMERA_INPUT;
++                      ret = 0;
++              }
++      }
++
++      return ret;
++}
++
++static int s3c_camif_v4l2_g_output(camif_cfg_t *cfg, void *arg)
++{
++      unsigned int *index = arg;
++
++      *index = cfg->v2.output->index;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_output(camif_cfg_t *cfg, unsigned int index)
++{
++      if (index >= NUMBER_OF_OUTPUTS)
++              return -EINVAL;
++      else {
++              cfg->v2.output = (struct v4l2_output *) &fimc_outputs[index];
++              return 0;
++      }
++}
++
++static int s3c_camif_v4l2_enum_input(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_input *i = arg;
++
++      if (i->index >= NUMBER_OF_INPUTS)
++              return -EINVAL;
++
++      memcpy(i, &fimc_inputs[i->index], sizeof(struct v4l2_input));
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_enum_output(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_output *i = arg;
++
++      if (i->index >= NUMBER_OF_OUTPUTS)
++              return -EINVAL;
++
++      memcpy(i, &fimc_outputs[i->index], sizeof(struct v4l2_output));
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_reqbufs(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_requestbuffers *req = arg;
++
++      if (req->memory != V4L2_MEMORY_MMAP) {
++              printk(KERN_ERR "Only V4L2_MEMORY_MMAP capture is supported\n");
++              return -EINVAL;
++      }
++
++      /* control user input */
++      if (req->count > 2)
++              req->count = 4;
++      else if (req->count > 1)
++              req->count = 2;
++      else
++              req->count = 1;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_querybuf(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_buffer *buf = arg;
++
++      if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
++          buf->memory != V4L2_MEMORY_MMAP)
++              return -1;
++
++      buf->length = cfg->buffer_size;
++      buf->m.offset = buf->length * buf->index;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_qbuf(camif_cfg_t *cfg, void *arg)
++{
++      return 0;
++}
++
++static int s3c_camif_v4l2_dqbuf(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_buffer *buf = arg;
++
++      buf->index = cfg->cur_frame_num % cfg->pp_num;
++
++      return 0;
++}
++
++/*
++ * S3C specific
++ */
++static int s3c_camif_v4l2_s_msdma(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_msdma_format *f = arg;
++      int ret;
++
++      switch(f->input_path) {
++      case V4L2_MSDMA_PREVIEW:
++              cfg->cis->user--;
++                  /* CIS will be replaced with a CIS for MSDMA */
++
++              cfg->cis = &msdma_input;
++              cfg->cis->user++;
++              cfg->input_channel = MSDMA_FROM_PREVIEW;
++              break;
++
++      case V4L2_MSDMA_CODEC:
++              cfg->cis->user--;
++                  /* CIS will be replaced with a CIS for MSDMA */
++
++              cfg->cis = &msdma_input;
++              cfg->cis->user++;
++              cfg->input_channel = MSDMA_FROM_CODEC;
++              break;
++
++      default:
++              cfg->input_channel = CAMERA_INPUT;
++              break;
++      }
++
++      cfg->cis->source_x = f->width;
++      cfg->cis->source_y = f->height;
++
++      s3c_camif_convert_format(f->pixelformat, (int *) &cfg->src_fmt);
++
++      cfg->cis->win_hor_ofst = 0;
++      cfg->cis->win_ver_ofst = 0;
++      cfg->cis->win_hor_ofst2 = 0;
++      cfg->cis->win_ver_ofst2 = 0;
++
++      ret = s3c_camif_control_fimc(cfg);
++
++      switch(f->input_path) {
++      case V4L2_MSDMA_PREVIEW:
++              ret = s3c_camif_start_preview(cfg);
++              break;
++
++      case V4L2_MSDMA_CODEC:
++              ret = s3c_camif_start_capture(cfg);
++              break;
++
++      default:
++              break;
++
++      }
++
++      return ret;
++}
++
++static int s3c_camif_v4l2_msdma_start(camif_cfg_t *cfg, void *arg)
++{
++      if (cfg->input_channel == MSDMA_FROM_PREVIEW) {
++              cfg->msdma_status = 1;
++              s3c_camif_start_preview_msdma(cfg);
++      }
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_msdma_stop(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_msdma_format *f = arg;
++      int ret = -1;
++
++      cfg->cis->status &= ~C_WORKING;
++      cfg->msdma_status = 0;
++
++      switch(f->input_path) {
++      case V4L2_MSDMA_PREVIEW:
++              ret = s3c_camif_stop_preview(cfg);
++              break;
++
++      case V4L2_MSDMA_CODEC:
++              ret = s3c_camif_stop_capture(cfg);
++              break;
++
++      default:
++              break;
++      }
++
++      return ret;
++}
++
++static int s3c_camif_v4l2_camera_start(camif_cfg_t *cfg, void *arg)
++{
++      return 0;
++}
++
++static int s3c_camif_v4l2_camera_stop(camif_cfg_t *cfg, void *arg)
++{
++      return 0;
++}
++
++static int s3c_camif_v4l2_cropcap(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_cropcap *cap = arg;
++
++      if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
++          cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
++              return -EINVAL;
++
++      /* crop limitations */
++      cfg->v2.crop_bounds.left = 0;
++      cfg->v2.crop_bounds.top = 0;
++      cfg->v2.crop_bounds.width = cfg->cis->source_x;
++      cfg->v2.crop_bounds.height = cfg->cis->source_y;
++
++      /* crop default values */
++      cfg->v2.crop_defrect.left =
++          (cfg->cis->source_x - CROP_DEFAULT_WIDTH) / 2;
++      cfg->v2.crop_defrect.top =
++          (cfg->cis->source_y - CROP_DEFAULT_HEIGHT) / 2;
++      cfg->v2.crop_defrect.width = CROP_DEFAULT_WIDTH;
++      cfg->v2.crop_defrect.height = CROP_DEFAULT_HEIGHT;
++
++      cap->bounds = cfg->v2.crop_bounds;
++      cap->defrect = cfg->v2.crop_defrect;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_g_crop(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_crop *crop = arg;
++
++      if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
++          crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
++              return -EINVAL;
++
++      crop->c = cfg->v2.crop_current;
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_crop(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_crop *crop = arg;
++
++      if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
++          crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
++              return -EINVAL;
++
++      if (crop->c.height < 0)
++              return -EINVAL;
++
++      if (crop->c.width < 0)
++              return -EINVAL;
++
++      if ((crop->c.left + crop->c.width > cfg->cis->source_x) ||
++              (crop->c.top + crop->c.height > cfg->cis->source_y))
++              return -EINVAL;
++
++      cfg->v2.crop_current = crop->c;
++
++      cfg->cis->win_hor_ofst = (cfg->cis->source_x - crop->c.width) / 2;
++      cfg->cis->win_ver_ofst = (cfg->cis->source_y - crop->c.height) / 2;
++
++      cfg->cis->win_hor_ofst2 = cfg->cis->win_hor_ofst;
++      cfg->cis->win_ver_ofst2 = cfg->cis->win_ver_ofst;
++
++      s3c_camif_restart_preview(cfg);
++
++      return 0;
++}
++
++static int s3c_camif_v4l2_s_parm(camif_cfg_t *cfg, void *arg)
++{
++      struct v4l2_streamparm *sp = arg;
++
++      if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++              return -EINVAL;
++
++      if (sp->parm.capture.capturemode == V4L2_MODE_HIGHQUALITY) {
++              s3c_camif_change_mode(cfg, SENSOR_MAX);
++              s3c_camif_control_fimc(cfg);
++      } else {
++              s3c_camif_change_mode(cfg, SENSOR_DEFAULT);
++              s3c_camif_control_fimc(cfg);
++      }
++
++      return 0;
++}
++
++/*************************************************************************
++ * Interrupt part
++ ************************************************************************/
++#if defined(FSM_ON_CODEC) && !defined(USE_LAST_IRQ)
++int s3c_camif_do_fsm_codec(camif_cfg_t *cfg)
++{
++      cfg->perf.frames++;
++
++      if (cfg->fsm == CAMIF_DUMMY_INT &&
++          cfg->perf.frames > CAMIF_CAPTURE_SKIP_FRAMES)
++              cfg->fsm = CAMIF_NORMAL_INT;
++
++      switch (cfg->fsm) {
++      case CAMIF_DUMMY_INT:
++              DPRINTK(KERN_INFO "CAMIF_DUMMY_INT: %d\n", cfg->perf.frames);
++              cfg->status = CAMIF_STARTED;
++              cfg->fsm = CAMIF_DUMMY_INT;
++              return INSTANT_SKIP;
++
++      case CAMIF_NORMAL_INT:
++              DPRINTK(KERN_INFO "CAMIF_NORMAL_INT: %d\n", cfg->perf.frames);
++              cfg->status = CAMIF_INT_HAPPEN;
++              cfg->fsm = CAMIF_CONTINUOUS_INT;
++              return INSTANT_GO;
++
++      case CAMIF_CONTINUOUS_INT:
++              DPRINTK(KERN_INFO "CAMIF_CONTINUOS_INT: %d\n",
++                  cfg->perf.frames);
++              cfg->status = CAMIF_INT_HAPPEN;
++              cfg->fsm = CAMIF_CONTINUOUS_INT;
++              return INSTANT_GO;
++
++      default:
++              printk(KERN_INFO "Unexpect INT: %d\n", cfg->fsm);
++              return INSTANT_SKIP;
++      }
++}
++#endif
++
++#if defined(FSM_ON_CODEC) && defined(USE_LAST_IRQ)
++int s3c_camif_do_fsm_codec_lastirq(camif_cfg_t *cfg)
++{
++      cfg->perf.frames++;
++
++      if (cfg->fsm == CAMIF_DUMMY_INT &&
++          cfg->perf.frames > CAMIF_CAPTURE_SKIP_FRAMES - 2)
++              cfg->fsm = CAMIF_SET_LAST_INT;
++
++      switch (cfg->fsm) {
++      case CAMIF_DUMMY_INT:
++              DPRINTK(KERN_INFO "CAMIF_DUMMY_INT: %d\n", cfg->perf.frames);
++              cfg->status = CAMIF_STARTED;
++              cfg->fsm = CAMIF_DUMMY_INT;
++              return INSTANT_SKIP;
++
++      case CAMIF_SET_LAST_INT:
++              DPRINTK(KERN_INFO "CAMIF_SET_LAST_INT: %d\n", cfg->perf.frames);
++              s3c_camif_enable_lastirq(cfg);
++
++/* in 64xx, lastirq is not auto cleared. */
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++              s3c_camif_disable_lastirq(cfg);
++#endif
++              cfg->status = CAMIF_INT_HAPPEN;
++              cfg->fsm = CAMIF_STOP_CAPTURE;
++              return INSTANT_SKIP;
++
++      case CAMIF_STOP_CAPTURE:
++              DPRINTK(KERN_INFO "CAMIF_STOP_CAPTURE: %d\n", cfg->perf.frames);
++              cfg->capture_enable = CAMIF_DMA_OFF;
++              s3c_camif_stop_dma(cfg);
++              cfg->fsm = CAMIF_LAST_IRQ;
++              return INSTANT_SKIP;
++
++      case CAMIF_LAST_IRQ:
++              DPRINTK(KERN_INFO "CAMIF_LAST_IRQ: %d\n", cfg->perf.frames);
++              cfg->fsm = CAMIF_SET_LAST_INT;
++              cfg->status = CAMIF_INT_HAPPEN;
++              return INSTANT_GO;
++
++      default:
++              printk(KERN_INFO "Unexpect INT: %d\n", cfg->fsm);
++              return = INSTANT_SKIP;
++      }
++}
++#endif
++
++#if defined(FSM_ON_PREVIEW)
++static int s3c_camif_do_lastirq_preview(camif_cfg_t *cfg)
++{
++      cfg->perf.frames++;
++
++      if (cfg->fsm == CAMIF_NORMAL_INT)
++              if (cfg->perf.frames % CHECK_FREQ == 0)
++                      if (s3c_camif_check_global_status(cfg) > 0)
++                              cfg->fsm = CAMIF_Xth_INT;
++
++      switch (cfg->fsm) {
++      case CAMIF_1st_INT:
++              DPRINTK(KERN_INFO "CAMIF_1st_INT INT\n");
++              cfg->fsm = CAMIF_NORMAL_INT;
++              return INSTANT_SKIP;
++
++      case CAMIF_NORMAL_INT:
++              DPRINTK(KERN_INFO "CAMIF_NORMAL_INT\n");
++              cfg->status = CAMIF_INT_HAPPEN;
++              cfg->fsm = CAMIF_NORMAL_INT;
++              return INSTANT_GO;
++
++      case CAMIF_Xth_INT:
++              DPRINTK(KERN_INFO "CAMIF_Xth_INT\n");
++              s3c_camif_enable_lastirq(cfg);
++              cfg->status = CAMIF_INT_HAPPEN;
++              cfg->fsm = CAMIF_Yth_INT;
++              return INSTANT_GO;
++
++      case CAMIF_Yth_INT:
++              DPRINTK(KERN_INFO "CAMIF_Yth_INT\n");
++              s3c_camif_disable_lastirq(cfg);
++              cfg->capture_enable = CAMIF_DMA_OFF;
++              cfg->status = CAMIF_INT_HAPPEN;
++              s3c_camif_stop_dma(cfg);
++              cfg->fsm = CAMIF_Zth_INT;
++              return INSTANT_GO;
++
++      case CAMIF_Zth_INT:
++              DPRINTK(KERN_INFO "CAMIF_Zth_INT\n");
++              cfg->fsm = CAMIF_DUMMY_INT;
++              cfg->status = CAMIF_INT_HAPPEN;
++              s3c_camif_auto_restart(cfg);
++              return INSTANT_GO;
++
++      case CAMIF_DUMMY_INT:
++              DPRINTK(KERN_INFO "CAMIF_DUMMY_INT\n");
++              cfg->status = CAMIF_STOPPED;
++              return INSTANT_SKIP;
++
++      default:
++              printk(KERN_INFO "Unexpected INT %d\n", cfg->fsm);
++              return INSTANT_SKIP;
++      }
++}
++#endif
++
++static irqreturn_t s3c_camif_do_irq_codec(int irq, void *dev_id)
++{
++      camif_cfg_t *cfg = (camif_cfg_t *) dev_id;
++
++/* @@@ SMKD ? - WA */
++#if 0 && (defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410))
++      s3c_gpio_setpin(S3C_GPN15, 1);
++#endif
++      s3c_camif_clear_irq(irq);
++      s3c_camif_get_fifo_status(cfg);
++      s3c_camif_get_frame_num(cfg);
++
++#if defined(FSM_ON_CODEC) && !defined(USE_LAST_IRQ)
++      if (s3c_camif_do_fsm_codec(cfg) == INSTANT_SKIP)
++              return IRQ_HANDLED;
++#endif
++
++#if defined(FSM_ON_CODEC) && defined(USE_LAST_IRQ)
++      if (s3c_camif_do_fsm_codec_lastirq(cfg) == INSTANT_SKIP)
++              return IRQ_HANDLED;
++#endif
++      wake_up_interruptible(&cfg->waitq);
++
++      return IRQ_HANDLED;
++}
++
++static irqreturn_t s3c_camif_do_irq_preview(int irq, void *dev_id)
++{
++      camif_cfg_t *cfg = (camif_cfg_t *) dev_id;
++
++      s3c_camif_clear_irq(irq);
++      s3c_camif_get_fifo_status(cfg);
++      s3c_camif_get_frame_num(cfg);
++      wake_up_interruptible(&cfg->waitq);
++
++#if defined(FSM_ON_PREVIEW)
++      if (s3c_camif_do_lastirq_preview(cfg) == INSTANT_SKIP)
++              return IRQ_HANDLED;
++
++      wake_up_interruptible(&cfg->waitq);
++#endif
++      cfg->status = CAMIF_INT_HAPPEN;
++
++      return IRQ_HANDLED;
++}
++
++static void s3c_camif_release_irq(camif_cfg_t * cfg)
++{
++      disable_irq(cfg->irq);
++      free_irq(cfg->irq, cfg);
++}
++
++static int s3c_camif_request_irq(camif_cfg_t * cfg)
++{
++      int ret;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              ret = request_irq(cfg->irq, s3c_camif_do_irq_codec,
++                  IRQF_SHARED, cfg->shortname, cfg);
++              if (ret)
++                      printk(KERN_ERR "Request irq (CAM_C) failed\n");
++              else
++                      printk(KERN_INFO "Request irq %d for codec\n",
++                          cfg->irq);
++      }
++
++      if (cfg->dma_type & CAMIF_PREVIEW) {
++              ret = request_irq(cfg->irq, s3c_camif_do_irq_preview,
++                  IRQF_SHARED, cfg->shortname, cfg);
++              if (ret)
++                      printk("Request_irq (CAM_P) failed\n");
++              else
++                      printk(KERN_INFO "Request irq %d for preview\n",
++                          cfg->irq);
++      }
++
++      return 0;
++}
++
++/*************************************************************************
++ * Standard file operations part
++ ************************************************************************/
++long s3c_camif_ioctl(struct file *file, unsigned int cmd, unsigned long _arg)
++{
++      camif_cfg_t *cfg = file->private_data;
++      void *arg = (void *) _arg; /* @@@ - WA */
++
++      switch (cmd) {
++      case VIDIOC_QUERYCAP:
++              return s3c_camif_v4l2_querycap(cfg, arg);
++
++      case VIDIOC_G_FBUF:
++              return s3c_camif_v4l2_g_fbuf(cfg, arg);
++
++      case VIDIOC_S_FBUF:
++              return s3c_camif_v4l2_s_fbuf(cfg, arg);
++
++      case VIDIOC_G_FMT:
++              return s3c_camif_v4l2_g_fmt(cfg, arg);
++
++      case VIDIOC_S_FMT:
++              return s3c_camif_v4l2_s_fmt(cfg, arg);
++
++      case VIDIOC_ENUM_FMT:
++              return s3c_camif_v4l2_enum_fmt(cfg, arg);
++
++      case VIDIOC_OVERLAY:
++              return s3c_camif_v4l2_overlay(cfg, arg);
++
++      case VIDIOC_S_CTRL:
++              return s3c_camif_v4l2_s_ctrl(cfg, arg);
++
++      case VIDIOC_G_CTRL:
++              return s3c_camif_v4l2_g_ctrl(cfg, arg);
++
++      case VIDIOC_STREAMON:
++              return s3c_camif_v4l2_streamon(cfg, arg);
++
++      case VIDIOC_STREAMOFF:
++              return s3c_camif_v4l2_streamoff(cfg, arg);
++
++      case VIDIOC_G_INPUT:
++              return s3c_camif_v4l2_g_input(cfg, arg);
++
++      case VIDIOC_S_INPUT:
++              return s3c_camif_v4l2_s_input(cfg, *((int *) arg));
++
++      case VIDIOC_G_OUTPUT:
++              return s3c_camif_v4l2_g_output(cfg, arg);
++
++      case VIDIOC_S_OUTPUT:
++              return s3c_camif_v4l2_s_output(cfg, *((int *) arg));
++
++      case VIDIOC_ENUMINPUT:
++              return s3c_camif_v4l2_enum_input(cfg, arg);
++
++      case VIDIOC_ENUMOUTPUT:
++              return s3c_camif_v4l2_enum_output(cfg, arg);
++
++      case VIDIOC_REQBUFS:
++              return s3c_camif_v4l2_reqbufs(cfg, arg);
++
++      case VIDIOC_QUERYBUF:
++              return s3c_camif_v4l2_querybuf(cfg, arg);
++
++      case VIDIOC_QBUF:
++              return s3c_camif_v4l2_qbuf(cfg, arg);
++
++      case VIDIOC_DQBUF:
++              return s3c_camif_v4l2_dqbuf(cfg, arg);
++
++      case VIDIOC_S_MSDMA:
++              return s3c_camif_v4l2_s_msdma(cfg, arg);
++
++      case VIDIOC_MSDMA_START:
++              return s3c_camif_v4l2_msdma_start(cfg, arg);
++
++      case VIDIOC_MSDMA_STOP:
++              return s3c_camif_v4l2_msdma_stop(cfg, arg);
++
++      case VIDIOC_S_CAMERA_START:
++              return s3c_camif_v4l2_camera_start(cfg, arg);
++
++      case VIDIOC_S_CAMERA_STOP:
++              return s3c_camif_v4l2_camera_stop(cfg, arg);
++
++      case VIDIOC_CROPCAP:
++              return s3c_camif_v4l2_cropcap(cfg, arg);
++
++      case VIDIOC_G_CROP:
++              return s3c_camif_v4l2_g_crop(cfg, arg);
++
++      case VIDIOC_S_CROP:
++              return s3c_camif_v4l2_s_crop(cfg, arg);
++
++      case VIDIOC_S_PARM:
++              return s3c_camif_v4l2_s_parm(cfg, arg);
++
++      default:        /* For v4l compatability */
++              return
++                  v4l_compat_translate_ioctl(file, cmd, arg, s3c_camif_ioctl);
++      }
++}
++
++
++void om_3d7k_camera_on(void)
++{
++      extern struct pcf50633 *om_3d7k_pcf;
++      int i;
++
++      gpio_direction_output(S3C64XX_GPF(3), 0);
++
++      /* @@@ hack - WA */
++      pcf50633_reg_write(om_3d7k_pcf, 0x30, 0x21);
++      for (i = 0; !(pcf50633_reg_read(om_3d7k_pcf, 0x42) & 0x02); i++) {
++              if (i == 100) {
++                      printk(KERN_ERR "can't bring up LDO2\n");
++                      break;
++              }
++              msleep(10);
++      }
++
++      pcf50633_reg_write(om_3d7k_pcf, 0x39, 0x13);
++      pcf50633_reg_write(om_3d7k_pcf, 0x3a, 0x21);
++      for (i = 0; !(pcf50633_reg_read(om_3d7k_pcf, 0x42) & 0x40); i++) {
++              if (i == 100) {
++                      printk(KERN_ERR "can't bring up HCLDO\n");
++                      break;
++              }
++              msleep(10);
++      }
++
++      msleep(100);    /* > 0 ms */
++
++      if (cam_clock)
++              clk_enable(cam_clock);
++
++      msleep(1);      /* > 100 cycles */
++      gpio_direction_output(S3C64XX_GPF(3), 1);
++      msleep(25);     /* > 1 Mcycles */
++      s3c_gpio_cfgpin(S3C64XX_GPF(3), S3C64XX_GPF3_CAMIF_nRST);
++      msleep(25);     /* just to be sure > 1 Mcycles */
++
++      __raw_writel(__raw_readl(S3C64XX_NORMAL_CFG) |
++          S3C64XX_NORMALCFG_DOMAIN_I_ON, S3C64XX_NORMAL_CFG);
++}
++
++void om_3d7k_camera_off(void)
++{
++      extern struct pcf50633 *om_3d7k_pcf;
++
++      gpio_direction_output(S3C64XX_GPF(3), 0);
++
++      msleep(1);      /* > 20 cycles */
++
++      if (cam_clock)
++              clk_disable(cam_clock);
++      msleep(1);      /* > 0 ms */
++
++      /* @@@ hack - WA */
++      pcf50633_reg_write(om_3d7k_pcf, 0x3a, 0x20);    /* 2V8, ... */
++      pcf50633_reg_write(om_3d7k_pcf, 0x30, 0x20);    /* ... then 1V5 */
++
++#if 0
++      __raw_writel(__raw_readl(S3C64XX_NORMAL_CFG) &
++          ~S3C64XX_NORMALCFG_DOMAIN_I_ON, S3C64XX_NORMAL_CFG);
++#endif
++}
++
++
++/* @@@ - WA */
++#define s3c_camif_exclusive_open(inode, file) 0
++#define s3c_camif_exclusive_release(inode, file)
++
++int s3c_camif_open(struct file *file)
++{
++      int err;
++      camif_cfg_t *cfg =
++          s3c_camif_get_fimc_object(MINOR(file->f_dentry->d_inode->i_rdev));
++
++      if (!cfg->cis) {
++              printk(KERN_ERR "An object for a CIS is missing\n");
++              printk(KERN_ERR
++                  "Using msdma_input as a default CIS data structure\n");
++              cfg->cis = &msdma_input;
++
++              /* global lock for both Codec and Preview */
++              sema_init(&cfg->cis->lock, 1);
++              cfg->cis->status |= P_NOT_WORKING;
++      }
++
++      if (cfg->dma_type & CAMIF_PREVIEW) {
++              if (cfg->dma_type & CAMIF_PREVIEW)
++                      cfg->cis->status &= ~P_NOT_WORKING;
++
++              up(&cfg->cis->lock);
++      }
++
++      om_3d7k_camera_on();
++
++      err = s3c_camif_exclusive_open(inode, file);
++      cfg->cis->user++;
++      cfg->status = CAMIF_STOPPED;
++
++      if (err < 0)
++              return err;
++
++      if (file->f_flags & O_NONCAP) {
++              printk(KERN_ERR "Don't support non-capturing open\n");
++              return 0;
++      }
++
++      file->private_data = cfg;
++
++      s3c_camif_init_sensor(cfg);
++
++      return 0;
++}
++
++int s3c_camif_release(struct file *file)
++{
++      camif_cfg_t *cfg =
++          s3c_camif_get_fimc_object(MINOR(file->f_dentry->d_inode->i_rdev));
++
++      if (cfg->dma_type & CAMIF_PREVIEW) {
++              cfg->cis->status &= ~PWANT2START;
++              cfg->cis->status |= P_NOT_WORKING;
++              s3c_camif_stop_preview(cfg);
++              up(&cfg->cis->lock);
++      } else {
++              cfg->cis->status &= ~CWANT2START;
++              s3c_camif_stop_capture(cfg);
++      }
++
++      s3c_camif_exclusive_release(inode, file);
++
++      if (cfg->cis->sensor == NULL)
++              DPRINTK("A CIS sensor for MSDMA has been used\n");
++      else
++              cfg->cis->sensor->driver->command(cfg->cis->sensor, USER_EXIT,
++                  NULL);
++
++      cfg->cis->user--;
++      cfg->status = CAMIF_STOPPED;
++
++      om_3d7k_camera_off();
++      cfg->cis->init_sensor = 0;
++
++      return 0;
++}
++
++ssize_t s3c_camif_read(struct file * file, char *buf, size_t count,
++    loff_t *pos)
++{
++      camif_cfg_t *cfg = NULL;
++      size_t end;
++
++      cfg = s3c_camif_get_fimc_object(MINOR(file->f_dentry->d_inode->i_rdev));
++
++#if defined(FSM_ON_PREVIEW)
++      if (cfg->dma_type == CAMIF_PREVIEW) {
++              if (wait_event_interruptible(cfg->waitq,
++                  cfg->status == CAMIF_INT_HAPPEN))
++                      return -ERESTARTSYS;
++
++              cfg->status = CAMIF_STOPPED;
++      }
++#endif
++
++#if defined(FSM_ON_CODEC)
++      if (cfg->dma_type == CAMIF_CODEC) {
++              if (wait_event_interruptible(cfg->waitq,
++                  cfg->status == CAMIF_INT_HAPPEN))
++                      return -ERESTARTSYS;
++
++              cfg->status = CAMIF_STOPPED;
++      }
++#endif
++      end = min_t(size_t, cfg->pp_totalsize / cfg->pp_num, count);
++
++      if (copy_to_user(buf, s3c_camif_get_frame(cfg), end))
++              return -EFAULT;
++
++      return end;
++}
++
++ssize_t s3c_camif_write(struct file * f, const char *b, size_t c,
++    loff_t *offset)
++{
++      camif_cfg_t *cfg;
++      int ret = 0;
++
++      cfg = s3c_camif_get_fimc_object(MINOR(f->f_dentry->d_inode->i_rdev));
++
++      switch (*b) {
++      case 'O':
++              if (cfg->dma_type & CAMIF_PREVIEW)
++                      s3c_camif_start_preview(cfg);
++              else {
++                      ret = s3c_camif_start_capture(cfg);
++
++                      if (ret < 0)
++                              ret = 1;
++              }
++
++              break;
++
++      case 'X':
++              if (cfg->dma_type & CAMIF_PREVIEW) {
++                      s3c_camif_stop_preview(cfg);
++                      cfg->cis->status |= P_NOT_WORKING;
++              } else {
++                      cfg->cis->status &= ~C_WORKING;
++                      s3c_camif_stop_capture(cfg);
++              }
++
++              break;
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++      case 'P':
++              if (cfg->dma_type & CAMIF_PREVIEW) {
++                      s3c_camif_start_preview(cfg);
++                      s3c_camif_do_postprocess(cfg);
++                      return 0;
++              } else
++                      return -EFAULT;
++#endif
++      default:
++              panic("s3c_camera_driver.c: s3c_camif_write() - "
++                  "Unexpected Parameter\n");
++      }
++
++      return ret;
++}
++
++int s3c_camif_mmap(struct file* filp, struct vm_area_struct *vma)
++{
++      camif_cfg_t *cfg = filp->private_data;
++
++      unsigned long pageFrameNo;
++      unsigned long size = vma->vm_end - vma->vm_start;
++      unsigned long total_size;
++
++      if (cfg->dma_type == CAMIF_PREVIEW)
++              total_size = RGB_MEM;
++      else
++              total_size = YUV_MEM;
++
++      /*
++       * page frame number of the address for a source RGB frame to be stored
++       * at.
++       */
++      pageFrameNo = __phys_to_pfn(cfg->pp_phys_buf);
++
++      if (size > total_size) {
++              printk(KERN_ERR "The size of RGB_MEM mapping is too big\n");
++              return -EINVAL;
++      }
++
++      if ((vma->vm_flags & VM_WRITE) && !(vma->vm_flags & VM_SHARED)) {
++              printk(KERN_ERR "Writable RGB_MEM mapping must be shared\n");
++              return -EINVAL;
++      }
++
++      if (remap_pfn_range(vma, vma->vm_start, pageFrameNo + vma->vm_pgoff,
++          size, vma->vm_page_prot))
++              return -EINVAL;
++
++      return 0;
++}
++
++static unsigned int s3c_camif_poll(struct file *file, poll_table *wait)
++{
++      unsigned int mask = 0;
++      camif_cfg_t *cfg = file->private_data;
++
++      poll_wait(file, &cfg->waitq, wait);
++
++      if (cfg->status == CAMIF_INT_HAPPEN)
++              mask = POLLIN | POLLRDNORM;
++
++      cfg->status = CAMIF_STOPPED;
++
++      return mask;
++}
++
++struct v4l2_file_operations camif_c_fops = {
++      .owner = THIS_MODULE,
++      .open = s3c_camif_open,
++      .release = s3c_camif_release,
++      .ioctl = s3c_camif_ioctl,
++      .read = s3c_camif_read,
++      .write = s3c_camif_write,
++      .mmap = s3c_camif_mmap,
++      .poll = s3c_camif_poll,
++};
++
++struct v4l2_file_operations camif_p_fops = {
++      .owner = THIS_MODULE,
++      .open = s3c_camif_open,
++      .release = s3c_camif_release,
++      .ioctl = s3c_camif_ioctl,
++      .read = s3c_camif_read,
++      .write = s3c_camif_write,
++      .mmap = s3c_camif_mmap,
++      .poll = s3c_camif_poll,
++};
++
++/*************************************************************************
++ * Templates for V4L2
++ ************************************************************************/
++void camif_vdev_release (struct video_device *vdev) {
++      kfree(vdev);
++}
++
++struct video_device codec_template = {
++      .name = CODEC_DEV_NAME,
++#if 0
++      .type = VID_TYPE_OVERLAY | VID_TYPE_CAPTURE | VID_TYPE_CLIPPING | VID_TYPE_SCALES,
++      .type2 = V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING,
++      .hardware = VID_HARDWARE_SAMSUNG_FIMC3X,
++#endif
++      .fops = &camif_c_fops,
++      .release  = camif_vdev_release,
++      .minor = CODEC_MINOR,
++};
++
++struct video_device preview_template = {
++      .name = PREVIEW_DEV_NAME,
++#if 0
++      .type = VID_TYPE_OVERLAY | VID_TYPE_CAPTURE | VID_TYPE_CLIPPING | VID_TYPE_SCALES,
++      .type2 = V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING,
++      .hardware = VID_HARDWARE_SAMSUNG_FIMC3X,
++#endif
++      .fops = &camif_p_fops,
++      .release  = camif_vdev_release,
++      .minor = PREVIEW_MINOR,
++};
++
++/*************************************************************************
++ * Initialize part
++ ************************************************************************/
++void s3c_camif_init_sensor(camif_cfg_t *cfg)
++{
++      camif_cis_t *cis = cfg->cis;
++      camif_cis_t *initialized_cis;
++
++      if (!cis->sensor) {
++              initialized_cis = (camif_cis_t *) get_initialized_cis();
++
++              if (initialized_cis == NULL) {
++                      printk(KERN_ERR "An I2C client for CIS sensor isn't registered\n");
++                      return;
++              }
++
++              cis = cfg->cis = initialized_cis;
++              cfg->input_channel = 0;
++              cfg->cis->user++;
++      }
++
++      if (!cis->init_sensor) {
++              cis->sensor->driver->command(cis->sensor, SENSOR_INIT, NULL);
++              cis->init_sensor = 1;
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K3BA)
++              cis->sensor->driver->command(cis->sensor, SENSOR_VGA, NULL);
++              cis->source_x = 640;
++              cis->source_y = 480;
++#elif defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++              cis->sensor->driver->command(cis->sensor, SENSOR_SVGA, NULL);
++              cis->source_x = 800;
++              cis->source_y = 600;
++#endif
++      }
++
++      cis->sensor->driver->command(cis->sensor, USER_ADD, NULL);
++}
++
++static int s3c_camif_init_preview(camif_cfg_t * cfg)
++{
++      cfg->target_x = PREVIEW_DEFAULT_WIDTH;
++      cfg->target_y = PREVIEW_DEFAULT_WIDTH;
++      cfg->pp_num = PREVIEW_DEFAULT_PPNUM;
++      cfg->dma_type = CAMIF_PREVIEW;
++      cfg->input_channel = CAMERA_INPUT;
++      cfg->src_fmt = CAMIF_YCBCR422;
++      cfg->output_channel = CAMIF_OUT_PP;
++      cfg->dst_fmt = CAMIF_RGB16;
++      cfg->flip = CAMIF_FLIP_Y;
++      cfg->v = &preview_template;
++
++      /* @@@ - WA */
++      //init_MUTEX((struct semaphore *) &cfg->v->lock);
++      init_waitqueue_head(&cfg->waitq);
++
++      cfg->status = CAMIF_STOPPED;
++
++      /* To get the handle of CODEC */
++      cfg->other = s3c_camif_get_fimc_object(CODEC_MINOR);
++
++      return cfg->status;
++}
++
++static int s3c_camif_init_codec(camif_cfg_t * cfg)
++{
++      cfg->target_x = CODEC_DEFAULT_WIDTH;
++      cfg->target_y = CODEC_DEFAULT_HEIGHT;
++      cfg->pp_num = CODEC_DEFAULT_PPNUM;
++      cfg->dma_type = CAMIF_CODEC;
++      cfg->src_fmt = CAMIF_YCBCR422;
++      cfg->input_channel = CAMERA_INPUT;
++      cfg->dst_fmt = CAMIF_YCBCR420;
++      cfg->output_channel = CAMIF_OUT_PP;
++      cfg->flip = CAMIF_FLIP_X;
++      cfg->v = &codec_template;
++
++      /* @@@ - WA */
++      //init_MUTEX((struct semaphore *) &cfg->v->lock);
++
++      init_waitqueue_head(&cfg->waitq);
++
++      cfg->status = CAMIF_STOPPED;
++
++      /* To get the handle of PREVIEW */
++      cfg->other = s3c_camif_get_fimc_object(PREVIEW_MINOR);
++
++      return cfg->status;
++}
++
++static int s3c_camif_probe(struct platform_device *pdev)
++{
++      struct resource *res;
++      camif_cfg_t *codec, *preview;
++      struct clk *camif_clock;
++
++      /* Initialize fimc objects */
++      codec = s3c_camif_get_fimc_object(CODEC_MINOR);
++      preview = s3c_camif_get_fimc_object(PREVIEW_MINOR);
++
++      memset(codec, 0, sizeof(camif_cfg_t));
++      memset(preview, 0, sizeof(camif_cfg_t));
++
++      /* Set the fimc name */
++      strcpy(codec->shortname, CODEC_DEV_NAME);
++      strcpy(preview->shortname, PREVIEW_DEV_NAME);
++
++      /* get resource for io memory */
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++      if (!res) {
++              printk("Failed to get io memory region resouce.\n");
++              return -1;
++      }
++
++      /* request mem region */
++      res = request_mem_region(res->start, res->end - res->start + 1,
++          pdev->name);
++
++      if (!res) {
++              printk("Failed to request io memory region.\n");
++              return -1;
++      }
++
++      /* ioremap for register block */
++      codec->regs = preview->regs =
++          ioremap(res->start, res->end - res->start + 1);
++
++      if (codec->regs == NULL) {
++              printk(KERN_ERR "Failed to remap register block\n");
++              return -1;
++      }
++
++      /* ioremap for reserved memory */
++      codec->pp_phys_buf = PHYS_OFFSET + (MEM_SIZE - RESERVED_MEM);
++      codec->pp_virt_buf = ioremap_nocache(codec->pp_phys_buf, YUV_MEM);
++
++      preview->pp_phys_buf =
++          PHYS_OFFSET + (MEM_SIZE - RESERVED_MEM) + YUV_MEM;
++      preview->pp_virt_buf = ioremap_nocache(preview->pp_phys_buf, RGB_MEM);
++
++      camif_clock = clk_get(&pdev->dev, "camif");
++      if (IS_ERR(camif_clock)) {
++              dev_err(&pdev->dev,
++                  "Failed to find camera interface clock source\n");
++              return PTR_ERR(cam_clock);
++      }
++      clk_enable(camif_clock);
++
++      /* Device init */
++      s3c_camif_init();
++      s3c_camif_init_codec(codec);
++      s3c_camif_init_preview(preview);
++
++      /* Set irq */
++      codec->irq = platform_get_irq(pdev, FIMC_CODEC_INDEX);
++      preview->irq = platform_get_irq(pdev, FIMC_PREVIEW_INDEX);
++
++      s3c_camif_request_irq(codec);
++      s3c_camif_request_irq(preview);
++
++      /* Register to video device */
++      if (video_register_device(codec->v, VFL_TYPE_GRABBER, CODEC_MINOR) !=
++          0) {
++              printk(KERN_ERR "Couldn't register this codec driver\n");
++              return -1;
++      }
++
++      if (video_register_device(preview->v, VFL_TYPE_GRABBER, PREVIEW_MINOR)
++          != 0) {
++              printk(KERN_ERR "Couldn't register this preview driver\n");
++              return -1;
++      }
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++      cam_clock = clk_get(&pdev->dev, "camera");
++#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2450)
++      cam_clock = clk_get(&pdev->dev, "camif-upll");
++#else
++#error        cam_clock should be defined
++#endif
++
++      if (IS_ERR(cam_clock)) {
++              printk("Failed to find camera clock source\n");
++              return PTR_ERR(cam_clock);
++      }
++
++      /* Print banner */
++      printk(KERN_INFO "S3C FIMC v%s\n", FIMC_VER);
++
++      return 0;
++}
++
++static int s3c_camif_remove(struct platform_device *pdev)
++{
++      camif_cfg_t *codec, *preview;
++
++      codec = s3c_camif_get_fimc_object(CODEC_MINOR);
++      preview = s3c_camif_get_fimc_object(PREVIEW_MINOR);
++
++      s3c_camif_release_irq(codec);
++      s3c_camif_release_irq(preview);
++
++      iounmap(codec->pp_virt_buf);
++      codec->pp_virt_buf = 0;
++
++      iounmap(preview->pp_virt_buf);
++      preview->pp_virt_buf = 0;
++
++      video_unregister_device(codec->v);
++      video_unregister_device(preview->v);
++
++      s3c_camif_set_priority(0);
++      clk_disable(cam_clock);
++
++      memset(codec, 0, sizeof(camif_cfg_t));
++      memset(preview, 0, sizeof(camif_cfg_t));
++
++      return 0;
++}
++
++static struct platform_driver s3c_camif_driver =
++{
++      .probe          = s3c_camif_probe,
++      .remove         = s3c_camif_remove,
++      .driver         = {
++              .name   = "s3c-camif",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int s3c_camif_register(void)
++{
++      platform_driver_register(&s3c_camif_driver);
++
++      return 0;
++}
++
++static void s3c_camif_unregister(void)
++{
++      platform_driver_unregister(&s3c_camif_driver);
++}
++
++void s3c_camif_open_sensor(camif_cis_t *cis)
++{
++      clk_set_rate(cam_clock, cis->camclk);
++      s3c_camif_reset(cis->reset_type, cis->reset_udelay);
++}
++
++void s3c_camif_register_sensor(struct i2c_client *ptr)
++{
++      camif_cfg_t *codec, *preview;
++      camif_cis_t *cis = i2c_get_clientdata(ptr);
++
++      codec = s3c_camif_get_fimc_object(CODEC_MINOR);
++      preview = s3c_camif_get_fimc_object(PREVIEW_MINOR);
++
++      codec->cis = preview->cis = cis;
++
++      sema_init(&codec->cis->lock, 1);
++      sema_init(&preview->cis->lock, 1);
++
++      preview->cis->status |= P_NOT_WORKING;  /* Default Value */
++
++      s3c_camif_set_polarity(preview);
++      s3c_camif_set_source_format(cis);
++      s3c_camif_set_priority(1);
++}
++
++void s3c_camif_unregister_sensor(struct i2c_client *ptr)
++{
++      camif_cis_t *cis;
++
++      cis = i2c_get_clientdata(ptr);
++      cis->init_sensor = 0;
++}
++
++module_init(s3c_camif_register);
++module_exit(s3c_camif_unregister);
++
++EXPORT_SYMBOL(s3c_camif_register_sensor);
++EXPORT_SYMBOL(s3c_camif_unregister_sensor);
++
++MODULE_AUTHOR("Jinsung Yang <jsgood.yang@samsung.com>");
++MODULE_DESCRIPTION("S3C Camera Driver for FIMC Interface");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camif.c linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camif.c
+--- linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camif.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camif.c   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,1916 @@
++/* drivers/media/video/s3c_camif.c
++ *
++ * Copyright (c) 2008 Samsung Electronics
++ *
++ * Samsung S3C Camera driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/wait.h>
++#include <linux/videodev.h>
++#include <asm/io.h>
++#include <mach/hardware.h>
++#include <asm/uaccess.h>
++#include <mach/map.h>
++#include <mach/gpio.h>
++#include <mach/irqs.h>
++#include <plat/gpio-cfg.h>
++#include <plat/regs-camif.h>
++#include <plat/regs-gpio.h>
++#include <plat/gpio-bank-f.h>
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#include <asm/arch/regs-irq.h>
++#endif
++
++#include "s3c_camif.h"
++
++#define S3C_VIDW00ADD0B0 (S3C24XX_VA_LCD+0xa0)
++#define S3C_VIDW01ADD0B0 (S3C24XX_VA_LCD+0xa8)
++
++static unsigned int irq_old_priority;
++
++/*************************************************************************
++ * Utility part
++ ************************************************************************/
++int s3c_camif_get_frame_num(camif_cfg_t *cfg)
++{
++      int index = 0;
++
++      if (cfg->dma_type & CAMIF_CODEC)
++              index = (readl(cfg->regs + S3C_CICOSTATUS) >> 26) & 0x3;
++      else {
++              assert(cfg->dma_type & CAMIF_PREVIEW);
++              index = (readl(cfg->regs + S3C_CIPRSTATUS) >> 26) & 0x3;
++      }
++
++      cfg->cur_frame_num = (index + 2) % 4;    /* When 4 PingPong */
++
++      return 0;
++}
++
++unsigned char* s3c_camif_get_frame(camif_cfg_t *cfg)
++{
++      unsigned char *ret = NULL;
++      int cnt = cfg->cur_frame_num;
++
++      if (cfg->dma_type & CAMIF_PREVIEW)
++              ret = cfg->img_buf[cnt].virt_rgb;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              if ((cfg->dst_fmt & CAMIF_RGB16) ||
++                  (cfg->dst_fmt & CAMIF_RGB24))
++                      ret = cfg->img_buf[cnt].virt_rgb;
++              else
++                      ret = cfg->img_buf[cnt].virt_y;
++      }
++
++      return ret;
++}
++
++int s3c_camif_get_fifo_status(camif_cfg_t *cfg)
++{
++      unsigned int reg, val, flag;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              flag = S3C_CICOSTATUS_OVFIY_CO | S3C_CICOSTATUS_OVFICB_CO |
++                  S3C_CICOSTATUS_OVFICR_CO;
++              reg = readl(cfg->regs + S3C_CICOSTATUS);
++
++              if (reg & flag) {
++                      /* FIFO Error Count ++  */
++                      val = readl(cfg->regs + S3C_CIWDOFST);
++                      val |= S3C_CIWDOFST_CLROVCOFIY |
++                          S3C_CIWDOFST_CLROVCOFICB | S3C_CIWDOFST_CLROVCOFICR;
++                      writel(val, cfg->regs + S3C_CIWDOFST);
++
++                      val = readl(cfg->regs + S3C_CIWDOFST);
++                      val &= ~(S3C_CIWDOFST_CLROVCOFIY |
++                          S3C_CIWDOFST_CLROVCOFICB |
++                          S3C_CIWDOFST_CLROVCOFICR);
++                      writel(val, cfg->regs + S3C_CIWDOFST);
++
++                      return 1; /* Error */
++              }
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++              flag = S3C_CIPRSTATUS_OVFICB_PR | S3C_CIPRSTATUS_OVFICR_PR;
++              reg = readl(cfg->regs + S3C_CIPRSTATUS);
++
++              if (reg & flag) {
++                      /* FIFO Error Count ++  */
++                      val = readl(cfg->regs + S3C_CIWDOFST);
++                      val |= S3C_CIWDOFST_CLROVPRFICB |
++                          S3C_CIWDOFST_CLROVPRFICR;
++                      writel(val, cfg->regs + S3C_CIWDOFST);
++
++                      val = readl(cfg->regs + S3C_CIWDOFST);
++                      val &= ~(S3C_CIWDOFST_CLROVPRFIY |
++                          S3C_CIWDOFST_CLROVPRFICB |
++                          S3C_CIWDOFST_CLROVPRFICR);
++                      writel(val, cfg->regs + S3C_CIWDOFST);
++
++                      return 1; /* Error */
++              }
++      }
++
++      return 0;
++}
++
++void s3c_camif_set_polarity(camif_cfg_t *cfg)
++{
++      camif_cis_t *cis = cfg->cis;
++      unsigned int val;
++      unsigned int cmd;
++
++      cmd = readl(cfg->regs + S3C_CIGCTRL);
++      cmd &= ~(0x7 << 24);
++
++      if (cis->polarity_pclk)
++              cmd |= S3C_CIGCTRL_INVPOLPCLK;
++
++      if (cis->polarity_vsync)
++              cmd |= S3C_CIGCTRL_INVPOLVSYNC;
++
++      if (cis->polarity_href)
++              cmd |= S3C_CIGCTRL_INVPOLHREF;
++
++      val = readl(cfg->regs + S3C_CIGCTRL);
++      val |= cmd;
++      writel(val, cfg->regs + S3C_CIGCTRL);
++}
++
++/*************************************************************************
++ * Memory part
++ ************************************************************************/
++static int s3c_camif_request_memory(camif_cfg_t *cfg)
++{
++      unsigned int t_size = 0, i = 0;
++      unsigned int area = 0;
++
++      area = cfg->target_x * cfg->target_y;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              if (cfg->dst_fmt & CAMIF_YCBCR420)
++                      t_size = area * 3 / 2;          /* CAMIF_YCBCR420 */
++              else if (cfg->dst_fmt & CAMIF_YCBCR422 ||
++                       cfg->dst_fmt & CAMIF_YCBCR422I)
++                      t_size = area * 2;              /* CAMIF_YCBCR422 */
++              else if (cfg->dst_fmt & CAMIF_RGB16)
++                      t_size = area * 2;              /* 2 bytes per pixel */
++              else if (cfg->dst_fmt & CAMIF_RGB24)
++                      t_size = area * 4;              /* 4 bytes per pixel */
++              else
++                      printk(KERN_INFO "Invalid target format\n");
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++
++              if (cfg->dst_fmt & CAMIF_RGB16)
++                      t_size = area * 2;              /* 2 bytes per pixel */
++              else if (cfg->dst_fmt & CAMIF_RGB24)
++                      t_size = area * 4;              /* 4 bytes per pixel */
++              else
++                      printk(KERN_ERR "Invalid target format\n");
++
++      } else {
++              return 0;
++      }
++
++      if (t_size % PAGE_SIZE != 0) {
++              i = t_size / PAGE_SIZE;
++              t_size = (i + 1) * PAGE_SIZE;
++      }
++
++      t_size = t_size * cfg->pp_num;
++      cfg->pp_totalsize = t_size;
++
++      printk(KERN_INFO "%s memory required: 0x%08X bytes\n",
++          cfg->dma_type & CAMIF_CODEC ? "Codec" : "Preview", t_size);
++
++      return 0;
++}
++
++static void s3c_camif_calc_burst_length_yuv422i(unsigned int hsize,
++    unsigned int *mburst, unsigned int *rburst)
++{
++      unsigned int tmp, wanted;
++
++      tmp = (hsize / 2) & 0xf;
++
++      switch (tmp) {
++      case 0:
++              wanted = 16;
++              break;
++
++      case 4:
++              wanted = 4;
++              break;
++
++      case 8:
++              wanted = 8;
++              break;
++
++      default:
++              wanted = 4;
++              break;
++      }
++
++      *mburst = wanted / 2;
++      *rburst = wanted / 2;
++}
++
++static void s3c_camif_calc_burst_length(unsigned int hsize,
++    unsigned int *mburst, unsigned int *rburst)
++{
++      unsigned int tmp;
++
++      tmp = (hsize / 4) & 0xf;
++
++      switch (tmp) {
++      case 0:
++              *mburst = 16;
++              *rburst = 16;
++              break;
++
++      case 4:
++              *mburst = 16;
++              *rburst = 4;
++              break;
++
++      case 8:
++              *mburst = 16;
++              *rburst = 8;
++              break;
++
++      default:
++              tmp = (hsize / 4) % 8;
++
++              if (tmp == 0) {
++                      *mburst = 8;
++                      *rburst = 8;
++              } else if (tmp == 4) {
++                      *mburst = 8;
++                      *rburst = 4;
++              } else {
++                      tmp = (hsize / 4) % 4;
++                      *mburst = 4;
++                      *rburst = tmp ? tmp : 4;
++              }
++
++              break;
++      }
++}
++
++int s3c_camif_setup_dma(camif_cfg_t *cfg)
++{
++      int width = cfg->target_x;
++      unsigned int val, yburst_m, yburst_r, cburst_m, cburst_r;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              if (cfg->dst_fmt == CAMIF_RGB16 ||
++                  cfg->dst_fmt == CAMIF_RGB24) {
++                      if (cfg->dst_fmt == CAMIF_RGB24) {
++                              if (width % 2 != 0)
++                                      return BURST_ERR;
++
++                              s3c_camif_calc_burst_length(width * 4,
++                                  &yburst_m, &yburst_r);
++                      } else {
++                              if ((width / 2) % 2 != 0)
++                                      return BURST_ERR;
++
++                              s3c_camif_calc_burst_length(width * 2,
++                                  &yburst_m, &yburst_r);
++                      }
++
++                      val = readl(cfg->regs + S3C_CICOCTRL);
++                      val &= ~(0xfffff << 4);
++
++                      if (cfg->dst_fmt == CAMIF_RGB24) {
++                              val = S3C_CICOCTRL_YBURST1_CO(yburst_m / 2) |
++                                  S3C_CICOCTRL_YBURST2_CO(yburst_r / 4) |
++                                  (4 << 9) | (2 << 4);
++                      } else {
++                              val = S3C_CICOCTRL_YBURST1_CO(yburst_m / 2) |
++                                  S3C_CICOCTRL_YBURST2_CO(yburst_r / 2) |
++                                  (4 << 9) | (2 << 4);
++                      }
++
++                      writel(val, cfg->regs + S3C_CICOCTRL);
++              } else {
++                      /* CODEC DMA WIDHT is multiple of 16 */
++                      if (width % 16 != 0)
++                              return BURST_ERR;
++
++                      if (cfg->dst_fmt == CAMIF_YCBCR422I) {
++                              s3c_camif_calc_burst_length_yuv422i(width,
++                                  &yburst_m, &yburst_r);
++                              cburst_m = yburst_m / 2;
++                              cburst_r = yburst_r / 2;
++                      } else {
++                              s3c_camif_calc_burst_length(width, &yburst_m,
++                                  &yburst_r);
++                              s3c_camif_calc_burst_length(width / 2,
++                                  &cburst_m, &cburst_r);
++                      }
++
++                      val = readl(cfg->regs + S3C_CICOCTRL);
++                      val &= ~(0xfffff << 4);
++                      val |= S3C_CICOCTRL_YBURST1_CO(yburst_m) |
++                          S3C_CICOCTRL_CBURST1_CO(cburst_m) |
++                          S3C_CICOCTRL_YBURST2_CO(yburst_r) |
++                          S3C_CICOCTRL_CBURST2_CO(cburst_r);
++                      writel(val, cfg->regs + S3C_CICOCTRL);
++              }
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++              if (cfg->dst_fmt == CAMIF_RGB24) {
++                      if (width % 2 != 0)
++                              return BURST_ERR;
++
++                      s3c_camif_calc_burst_length(width * 4, &yburst_m,
++                          &yburst_r);
++              } else {
++                      if ((width / 2) % 2 != 0)
++                              return BURST_ERR;
++
++                      s3c_camif_calc_burst_length(width * 2, &yburst_m,
++                          &yburst_r);
++              }
++
++              val = readl(cfg->regs + S3C_CIPRCTRL);
++              val &= ~(0x3ff << 14);
++              val |= S3C_CICOCTRL_YBURST1_CO(yburst_m) |
++                  S3C_CICOCTRL_YBURST2_CO(yburst_r);
++              writel(val, cfg->regs + S3C_CIPRCTRL);
++      }
++
++      return 0;
++}
++
++/*************************************************************************
++ * Input path part
++ ************************************************************************/
++/*
++ * 2443 MSDMA (Preview Only)
++ */
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++int s3c_camif_input_msdma_preview(camif_cfg_t * cfg)
++{
++      unsigned int addr_start_Y, addr_start_CB, addr_start_CR;
++      unsigned int addr_end_Y, addr_end_CB, addr_end_CR;
++      unsigned int val, val_width;
++      unsigned area, div;
++
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val &= ~(1 << 2);
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val |= 1 << 2;
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      switch(cfg->src_fmt) {
++      case CAMIF_YCBCR420:
++      default:
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val |= 0x1 << 1;
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++
++              div = 4;
++              break;
++
++      case CAMIF_YCBCR422:
++      case CAMIF_YCBCR422I:
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val = (val & ~(0x1 << 5)) | (0x1 << 5); /* Interleave_MS */
++              val &= ~(0x1 << 1);
++              val &= ~(0x3 << 3);                     /* YCbYCr */
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++
++              div = 2;
++              break;
++      }
++
++      area = cfg->cis->source_x * cfg->cis->source_y;
++
++      addr_start_Y = readl(cfg->regs + S3C_CIMSYSA);
++      addr_start_CB = addr_start_Y + area;
++      addr_start_CR = addr_start_CB + area / div;
++
++      addr_end_Y = addr_start_Y + area;
++      addr_end_CB = addr_start_CB + area / div;
++      addr_end_CR = addr_start_CR + area / div;
++
++      /* MSDMA memory */
++      writel(addr_start_Y, cfg->regs + S3C_CIMSYSA);
++      writel(addr_start_CB, cfg->regs + S3C_CIMSCBSA);
++      writel(addr_start_CR, cfg->regs + S3C_CIMSCRSA);
++
++      writel(addr_end_Y, cfg->regs + S3C_CIMSYEND);
++      writel(addr_end_CB, cfg->regs + S3C_CIMSCBEND);
++      writel(addr_end_CR, cfg->regs + S3C_CIMSCREND);
++
++      /* MSDMA memory offset - default : 0 */
++      writel(0, cfg->regs + S3C_CIMSYOFF);
++      writel(0, cfg->regs + S3C_CIMSCBOFF);
++      writel(0, cfg->regs + S3C_CIMSCROFF);
++
++      /* MSDMA for codec source image width */
++      val_width = cfg->cis->source_x;         /* MSCOWIDTH */
++      writel(val_width, cfg->regs + S3C_CIMSWIDTH);
++
++      return 0;
++}
++
++static int s3c_camif_input_msdma(camif_cfg_t *cfg)
++{
++      if (cfg->input_channel == MSDMA_FROM_PREVIEW)
++              s3c_camif_input_msdma_preview(cfg);
++
++      return 0;
++}
++
++/*
++ * 6400 MSDMA (Preview & Codec)
++ */
++#elif defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++int s3c_camif_input_msdma_codec(camif_cfg_t * cfg)
++{
++      u32 addr_start_Y, addr_start_CB, addr_start_CR;
++      u32 addr_end_Y, addr_end_CB, addr_end_CR;
++      u32 val, val_width;
++      unsigned area, div;
++
++      /* Codec path input data selection */
++      val = readl(cfg->regs + S3C_MSCOCTRL);
++      val &= ~(1 << 3);
++      writel(val, cfg->regs + S3C_MSCOCTRL);
++
++      val = readl(cfg->regs + S3C_MSCOCTRL);
++      val |= 1 << 3;
++      writel(val, cfg->regs + S3C_MSCOCTRL);
++
++      switch(cfg->src_fmt) {
++      case CAMIF_YCBCR420:
++      default:
++              val = readl(cfg->regs + S3C_MSCOCTRL);
++              val &= ~(0x3 << 1);
++              writel(val, cfg->regs + S3C_MSCOCTRL);
++
++              div = 4;
++              break;
++
++      case CAMIF_YCBCR422:
++      case CAMIF_YCBCR422I:
++              val = readl(cfg->regs + S3C_MSCOCTRL);
++              val = (val & ~(0x3 << 1)) | (0x2 << 1);
++              writel(val, cfg->regs + S3C_MSCOCTRL);
++
++              div = 2;
++              break;
++      }
++
++      area = cfg->cis->source_x * cfg->cis->source_y;
++
++      addr_start_Y = cfg->pp_phys_buf;
++      addr_start_CB = addr_start_Y + area;
++      addr_start_CR = addr_start_CB + area / div;
++
++      addr_end_Y = addr_start_Y + area;
++      addr_end_CB = addr_start_CB + area / div;
++      addr_end_CR = addr_start_CR + area / div;
++
++      /* MSDMA memory */
++      writel(addr_start_Y, cfg->regs + S3C_MSCOY0SA);
++      writel(addr_start_CB, cfg->regs + S3C_MSCOCB0SA);
++      writel(addr_start_CR, cfg->regs + S3C_MSCOCR0SA);
++
++      writel(addr_end_Y, cfg->regs + S3C_MSCOY0END);
++      writel(addr_end_CB, cfg->regs + S3C_MSCOCB0END);
++      writel(addr_end_CR, cfg->regs + S3C_MSCOCR0END);
++
++      /* MSDMA memory offset */
++      writel(0, cfg->regs + S3C_MSCOYOFF);
++      writel(0, cfg->regs + S3C_MSCOCBOFF);
++      writel(0, cfg->regs + S3C_MSCOCROFF);
++
++      /* MSDMA for codec source image width */
++      val_width = readl(cfg->regs + S3C_MSCOWIDTH);
++      val_width &= ~0x0fffffff;
++      val_width |= 0x1 << 31;                         /* AutoLoadEnable */
++      val_width |= cfg->cis->source_y << 16;          /* MSCOHEIGHT */
++      val_width |= cfg->cis->source_x;                /* MSCOWIDTH */
++      writel(val_width, cfg->regs + S3C_MSCOWIDTH);
++
++      return 0;
++}
++
++int s3c_camif_input_msdma_preview(camif_cfg_t * cfg)
++{
++      int ret = 0;
++      unsigned int addr_start_Y, addr_start_CB, addr_start_CR;
++      unsigned int addr_end_Y, addr_end_CB, addr_end_CR;
++      unsigned int val, val_width;
++      unsigned area, div;
++
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val &= ~(0x1 << 3);
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val |= 0x1 << 3;
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      switch(cfg->src_fmt) {
++      case CAMIF_YCBCR420:
++      default:
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val &= ~(0x3 << 1);
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++
++              div = 4;
++              break;
++
++      case CAMIF_YCBCR422:
++      case CAMIF_YCBCR422I:
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val = (val & ~(0x3 << 1)) | (0x2 << 1); /* YCbCr 422 Interleave */
++              val = (val & ~(0x3 << 4)) | (0x3 << 4); /* YCbYCr */
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++
++              div = 2;
++              break;
++      }
++
++      area = cfg->cis->source_x * cfg->cis->source_y;
++
++      addr_start_Y = readl(cfg->regs + S3C_MSPRY0SA);
++      addr_start_CB = addr_start_Y + area;
++      addr_start_CR = addr_start_CB + area / div;
++
++      addr_end_Y = addr_start_Y + area;
++      addr_end_CB = addr_start_CB + area / div;
++      addr_end_CR = addr_start_CR + area / div;
++
++      /* MSDMA memory */
++      writel(addr_start_Y, cfg->regs + S3C_MSPRY0SA);
++      writel(addr_start_CB, cfg->regs + S3C_MSPRCB0SA);
++      writel(addr_start_CR, cfg->regs + S3C_MSPRCR0SA);
++
++      writel(addr_end_Y, cfg->regs + S3C_MSPRY0END);
++      writel(addr_end_CB, cfg->regs + S3C_MSPRCB0END);
++      writel(addr_end_CR, cfg->regs + S3C_MSPRCR0END);
++
++      /* MSDMA memory offset */
++      writel(0, cfg->regs + S3C_MSPRYOFF);
++      writel(0, cfg->regs + S3C_MSPRCBOFF);
++      writel(0, cfg->regs + S3C_MSPRCROFF);
++
++      /* MSDMA for codec source image width */
++      val_width = readl(cfg->regs + S3C_MSPRWIDTH);
++      val_width &= ~(0x1 << 31);                      /* AutoLoadEnable */
++      val_width &= ~0x0fffffff;
++      val_width |= cfg->cis->source_y << 16;          /* MSCOHEIGHT */
++      val_width |= cfg->cis->source_x;                /* MSCOWIDTH */
++      writel(val_width, cfg->regs + S3C_MSPRWIDTH);
++
++      return ret;
++}
++
++static int s3c_camif_input_msdma(camif_cfg_t *cfg)
++{
++      if (cfg->input_channel == MSDMA_FROM_PREVIEW)
++              s3c_camif_input_msdma_preview(cfg);
++      else if (cfg->input_channel == MSDMA_FROM_CODEC)
++              s3c_camif_input_msdma_codec(cfg);
++
++      return 0;
++}
++#endif
++
++static int s3c_camif_input_camera(camif_cfg_t *cfg)
++{
++      unsigned int val;
++
++      s3c_camif_set_offset(cfg->cis);
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++              val = readl(cfg->regs + S3C_MSCOCTRL);
++              val &= ~(1 << 3);
++              writel(val, cfg->regs + S3C_MSCOCTRL);
++#endif
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450)
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val &= ~(1 << 2);
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++#elif defined(CONFIG_CPU_S3C6400)
++              val = readl(cfg->regs + S3C_CIMSCTRL);
++              val &= ~(1 << 3);
++              writel(val, cfg->regs + S3C_CIMSCTRL);
++#endif
++      } else
++              printk(KERN_ERR "Invalid DMA type\n");
++
++      return 0;
++}
++
++static int s3c_camif_setup_input_path(camif_cfg_t *cfg)
++{
++      if (cfg->input_channel == CAMERA_INPUT)
++              s3c_camif_input_camera(cfg);
++      else
++              s3c_camif_input_msdma(cfg);
++
++      return 0;
++}
++
++/*************************************************************************
++ * Output path part
++ ************************************************************************/
++static int s3c_camif_output_pp_codec_rgb(camif_cfg_t *cfg)
++{
++      int i;
++      unsigned int val;
++      unsigned int area = cfg->target_x * cfg->target_y;
++
++      if (cfg->dst_fmt & CAMIF_RGB24)
++              area = area * 4;
++      else {
++              assert (cfg->dst_fmt & CAMIF_RGB16);
++              area = area * 2;
++      }
++
++      if ((area % PAGE_SIZE) != 0) {
++              i = area / PAGE_SIZE;
++              area = (i + 1) * PAGE_SIZE;
++      }
++
++      cfg->buffer_size = area;
++
++      if (cfg->input_channel == MSDMA_FROM_CODEC) {
++{
++void __iomem *S3C24XX_VA_LCD = ioremap(S3C64XX_PA_FB, 1024*1024);
++              val = readl(S3C_VIDW00ADD0B0);
++}
++
++              for (i = 0; i < 4; i++)
++                      writel(val, cfg->regs + S3C_CICOYSA(i));
++      } else {
++              switch ( cfg->pp_num ) {
++              case 1:
++                      for (i = 0; i < 4; i++) {
++                              cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf;
++                              cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf;
++                              writel(cfg->img_buf[i].phys_rgb,
++                                  cfg->regs + S3C_CICOYSA(i));
++                      }
++
++                      break;
++
++              case 2:
++                      for (i = 0; i < 4; i++) {
++                              cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf;
++                              cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf;
++                              if (i & 1) {
++                                      cfg->img_buf[i].virt_rgb += area;
++                                      cfg->img_buf[i].phys_rgb += area;
++                              }
++                              writel(cfg->img_buf[i].phys_rgb,
++                                  cfg->regs + S3C_CICOYSA(i));
++                      }
++
++                      break;
++
++              case 4:
++                      for (i = 0; i < 4; i++) {
++                              cfg->img_buf[i].virt_rgb =
++                                  cfg->pp_virt_buf + i * area;
++                              cfg->img_buf[i].phys_rgb =
++                                  cfg->pp_phys_buf + i * area;
++                              writel(cfg->img_buf[i].phys_rgb,
++                                  cfg->regs + S3C_CICOYSA(i));
++                      }
++
++                      break;
++
++              default:
++                      printk(KERN_ERR "Invalid pingpong number %d\n",
++                          cfg->pp_num);
++                      panic("s3c camif halt\n");
++              }
++      }
++
++      return 0;
++}
++
++static int s3c_camif_output_pp_codec(camif_cfg_t *cfg)
++{
++      unsigned int i, cbcr_size = 0;
++      unsigned int area = cfg->target_x * cfg->target_y;
++      unsigned int one_p_size;
++
++      area = cfg->target_x * cfg->target_y;
++
++      if (cfg->dst_fmt & CAMIF_YCBCR420)
++              cbcr_size = area / 4;
++      else if (cfg->dst_fmt & CAMIF_YCBCR422 ||
++               cfg->dst_fmt & CAMIF_YCBCR422I)
++              cbcr_size = area / 2;
++      else if ((cfg->dst_fmt & CAMIF_RGB16) || (cfg->dst_fmt & CAMIF_RGB24)) {
++              s3c_camif_output_pp_codec_rgb(cfg);
++              return 0;
++      } else
++              printk(KERN_ERR "Invalid target format %d\n", cfg->dst_fmt);
++
++      one_p_size = area + 2 * cbcr_size;
++
++      if ((one_p_size % PAGE_SIZE) != 0) {
++              i = one_p_size / PAGE_SIZE;
++              one_p_size = (i + 1) * PAGE_SIZE;
++      }
++
++      cfg->buffer_size = one_p_size;
++
++      switch (cfg->pp_num) {
++      case 1 :
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_y = cfg->pp_virt_buf;
++                      cfg->img_buf[i].phys_y = cfg->pp_phys_buf;
++                      cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + area;
++                      cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + area;
++                      cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + area + cbcr_size;
++                      cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + area + cbcr_size;
++                      writel(cfg->img_buf[i].phys_y, cfg->regs + S3C_CICOYSA(i));
++                      writel(cfg->img_buf[i].phys_cb, cfg->regs + S3C_CICOCBSA(i));
++                      writel(cfg->img_buf[i].phys_cr, cfg->regs + S3C_CICOCRSA(i));
++              }
++
++              break;
++
++      case 2:
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_y = cfg->pp_virt_buf;
++                      cfg->img_buf[i].phys_y = cfg->pp_phys_buf;
++                      cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + area;
++                      cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + area;
++                      cfg->img_buf[i].virt_cr =
++                          cfg->pp_virt_buf + area + cbcr_size;
++                      cfg->img_buf[i].phys_cr =
++                          cfg->pp_phys_buf + area + cbcr_size;
++
++                      if (i & 1) {
++                              cfg->img_buf[i].virt_y += one_p_size;
++                              cfg->img_buf[i].phys_y += one_p_size;
++                              cfg->img_buf[i].virt_cb += one_p_size;
++                              cfg->img_buf[i].phys_cb += one_p_size;
++                              cfg->img_buf[i].virt_cr += one_p_size;
++                              cfg->img_buf[i].phys_cr += one_p_size;
++                      }
++
++                      writel(cfg->img_buf[i].phys_y,
++                          cfg->regs + S3C_CICOYSA(i));
++                      writel(cfg->img_buf[i].phys_cb,
++                          cfg->regs + S3C_CICOCBSA(i));
++                      writel(cfg->img_buf[i].phys_cr,
++                          cfg->regs + S3C_CICOCRSA(i));
++              }
++
++              break;
++
++      case 4:
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_y =
++                          cfg->pp_virt_buf + i * one_p_size;
++                      cfg->img_buf[i].phys_y =
++                          cfg->pp_phys_buf + i * one_p_size;
++                      cfg->img_buf[i].virt_cb =
++                          cfg->pp_virt_buf + area + i * one_p_size;
++                      cfg->img_buf[i].phys_cb =
++                          cfg->pp_phys_buf + area + i * one_p_size;
++                      cfg->img_buf[i].virt_cr = cfg->pp_virt_buf +
++                          area + cbcr_size + i * one_p_size;
++                      cfg->img_buf[i].phys_cr = cfg->pp_phys_buf +
++                          area + cbcr_size + i * one_p_size;
++                      writel(cfg->img_buf[i].phys_y,
++                          cfg->regs + S3C_CICOYSA(i));
++                      writel(cfg->img_buf[i].phys_cb,
++                          cfg->regs + S3C_CICOCBSA(i));
++                      writel(cfg->img_buf[i].phys_cr,
++                          cfg->regs + S3C_CICOCRSA(i));
++              }
++
++              break;
++
++      default:
++              printk(KERN_ERR "Invalid pingpong number %d\n", cfg->pp_num);
++      }
++
++      return 0;
++}
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++static int s3c_camif_io_duplex_preview(camif_cfg_t *cfg)
++{
++      unsigned int cbcr_size = 0;
++      unsigned int area = cfg->cis->source_x * cfg->cis->source_y;
++      unsigned int val;
++      int i;
++
++      val = readl(S3C_VIDW01ADD0);
++
++      if (!((cfg->dst_fmt & CAMIF_RGB16) || (cfg->dst_fmt & CAMIF_RGB24)))
++              printk(KERN_ERR "Invalid target format\n");
++
++      for (i = 0; i < 4; i++)
++              writel(val, cfg->regs + S3C_CIPRYSA(i));
++
++      if (cfg->src_fmt & CAMIF_YCBCR420) {
++              cbcr_size = area / 4;
++              cfg->img_buf[0].virt_cb = cfg->pp_virt_buf + area;
++              cfg->img_buf[0].phys_cb = cfg->pp_phys_buf + area;
++              cfg->img_buf[0].virt_cr = cfg->pp_virt_buf + area + cbcr_size;
++              cfg->img_buf[0].phys_cr = cfg->pp_phys_buf + area + cbcr_size;
++      } else if (cfg->src_fmt & CAMIF_YCBCR422 || cfg->dst_fmt & CAMIF_YCBCR422I) {
++              area = area * 2;
++              cfg->img_buf[0].virt_cb = 0;
++              cfg->img_buf[0].phys_cb = 0;
++              cfg->img_buf[0].virt_cr = 0;
++              cfg->img_buf[0].phys_cr = 0;
++      }
++
++      cfg->img_buf[0].virt_y = cfg->pp_virt_buf;
++      cfg->img_buf[0].phys_y = cfg->pp_phys_buf;
++
++      writel(cfg->img_buf[0].phys_y, cfg->regs + S3C_CIMSYSA);
++      writel(cfg->img_buf[0].phys_y + area, cfg->regs + S3C_CIMSYEND);
++
++      writel(cfg->img_buf[0].phys_cb, cfg->regs + S3C_CIMSCBSA);
++      writel(cfg->img_buf[0].phys_cb + cbcr_size, cfg->regs + S3C_CIMSCBEND);
++
++      writel(cfg->img_buf[0].phys_cr, cfg->regs + S3C_CIMSCRSA);
++      writel(cfg->img_buf[0].phys_cr + cbcr_size, cfg->regs + S3C_CIMSCREND);
++
++      writel(cfg->cis->source_x, cfg->regs + S3C_CIMSWIDTH);
++
++      return 0;
++}
++#elif defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++static int s3c_camif_io_duplex_preview(camif_cfg_t *cfg)
++{
++      unsigned int cbcr_size = 0;
++      unsigned int area = cfg->cis->source_x * cfg->cis->source_y;
++      unsigned int val;
++      int i;
++
++{
++void __iomem *S3C24XX_VA_LCD = ioremap(S3C64XX_PA_FB, 1024*1024);
++      val = readl(S3C_VIDW01ADD0B0);
++}
++
++      if (!((cfg->dst_fmt & CAMIF_RGB16) || (cfg->dst_fmt & CAMIF_RGB24)))
++              printk(KERN_ERR "Invalid target format\n");
++
++      for (i = 0; i < 4; i++)
++              writel(val, cfg->regs + S3C_CIPRYSA(i));
++
++      if (cfg->src_fmt & CAMIF_YCBCR420) {
++              cbcr_size = area / 4;
++              cfg->img_buf[0].virt_cb = cfg->pp_virt_buf + area;
++              cfg->img_buf[0].phys_cb = cfg->pp_phys_buf + area;
++              cfg->img_buf[0].virt_cr = cfg->pp_virt_buf + area + cbcr_size;
++              cfg->img_buf[0].phys_cr = cfg->pp_phys_buf + area + cbcr_size;
++      } else if (cfg->src_fmt & CAMIF_YCBCR422 ||
++                 cfg->dst_fmt & CAMIF_YCBCR422I) {
++              area = area * 2;
++              cfg->img_buf[0].virt_cb = 0;
++              cfg->img_buf[0].phys_cb = 0;
++              cfg->img_buf[0].virt_cr = 0;
++              cfg->img_buf[0].phys_cr = 0;
++      }
++
++      cfg->img_buf[0].virt_y = cfg->pp_virt_buf;
++      cfg->img_buf[0].phys_y = cfg->pp_phys_buf;
++
++      writel(cfg->img_buf[0].phys_y, cfg->regs + S3C_MSPRY0SA);
++      writel(cfg->img_buf[0].phys_y + area, cfg->regs + S3C_MSPRY0END);
++
++      writel(cfg->img_buf[0].phys_cb, cfg->regs + S3C_MSPRCB0SA);
++      writel(cfg->img_buf[0].phys_cb + cbcr_size, cfg->regs + S3C_MSPRCB0END);
++
++      writel(cfg->img_buf[0].phys_cr, cfg->regs + S3C_MSPRCR0SA);
++      writel(cfg->img_buf[0].phys_cr + cbcr_size, cfg->regs + S3C_MSPRCR0END);
++
++      val = readl(cfg->regs + S3C_MSCOWIDTH);
++      val |= 0x1 << 31;
++      val |= cfg->cis->source_y << 16;
++      val |= cfg->cis->source_x;
++      writel(val, cfg->regs + S3C_MSPRWIDTH);
++
++      return 0;
++}
++#endif
++
++static int s3c_camif_output_pp_preview(camif_cfg_t *cfg)
++{
++      int i;
++      unsigned int cbcr_size = 0;
++      unsigned int area = cfg->target_x * cfg->target_y;
++
++      if (cfg->input_channel) {
++              s3c_camif_io_duplex_preview(cfg);
++              return 0;
++      }
++
++      if (cfg->dst_fmt & CAMIF_YCBCR420)
++              cbcr_size = area / 4;
++      else if (cfg->dst_fmt & CAMIF_YCBCR422 ||
++               cfg->dst_fmt & CAMIF_YCBCR422I)
++              cbcr_size = area / 2;
++      else if (cfg->dst_fmt & CAMIF_RGB24)
++              area = area * 4;
++      else if (cfg->dst_fmt & CAMIF_RGB16)
++              area = area * 2;
++      else
++              printk(KERN_ERR "Invalid target format %d\n", cfg->dst_fmt);
++
++      if ((area % PAGE_SIZE) != 0) {
++              i = area / PAGE_SIZE;
++              area = (i + 1) * PAGE_SIZE;
++      }
++
++      cfg->buffer_size = area;
++
++      switch (cfg->pp_num) {
++      case 1:
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf;
++                      cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf;
++                      writel(cfg->img_buf[i].phys_rgb,
++                          cfg->regs + S3C_CIPRYSA(i));
++              }
++
++              break;
++
++      case 2:
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf;
++                      cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf;
++                      if (i & 1) {
++                              cfg->img_buf[i].virt_rgb += area;
++                              cfg->img_buf[i].phys_rgb += area;
++                      }
++
++                      writel(cfg->img_buf[i].phys_rgb,
++                          cfg->regs + S3C_CIPRYSA(i));
++              }
++
++              break;
++
++      case 4:
++              for (i = 0; i < 4; i++) {
++                      cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf + i * area;
++                      cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf + i * area;
++                      writel(cfg->img_buf[i].phys_rgb,
++                          cfg->regs + S3C_CIPRYSA(i));
++              }
++
++              break;
++
++      default:
++              printk(KERN_ERR "Invalid pingpong number %d\n", cfg->pp_num);
++      }
++
++      return 0;
++}
++
++static int s3c_camif_output_pp(camif_cfg_t *cfg)
++{
++      if (cfg->dma_type & CAMIF_CODEC)
++              s3c_camif_output_pp_codec(cfg);
++      else if (cfg->dma_type & CAMIF_PREVIEW)
++              s3c_camif_output_pp_preview(cfg);
++
++      return 0;
++}
++
++static int s3c_camif_output_lcd(camif_cfg_t *cfg)
++{
++      /* To Be Implemented */
++      return 0;
++}
++
++static int s3c_camif_setup_output_path(camif_cfg_t *cfg)
++{
++      if (cfg->output_channel == CAMIF_OUT_FIFO)
++              s3c_camif_output_lcd(cfg);
++      else
++              s3c_camif_output_pp(cfg);
++
++      return 0;
++}
++
++/*************************************************************************
++ * Scaler part
++ ************************************************************************/
++static int s3c_camif_set_target_area(camif_cfg_t *cfg)
++{
++      unsigned int rect = cfg->target_x * cfg->target_y;
++
++      if (cfg->dma_type & CAMIF_CODEC)
++              writel(rect, cfg->regs + S3C_CICOTAREA);
++      else if (cfg->dma_type & CAMIF_PREVIEW)
++              writel(rect, cfg->regs + S3C_CIPRTAREA);
++
++      return 0;
++}
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++static inline int s3c_camif_set_ratio(camif_cfg_t *cfg)
++{
++      unsigned int cmd =
++          S3C_CICOSCCTRL_CSCR2Y_WIDE | S3C_CICOSCCTRL_CSCY2R_WIDE;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++
++              writel(S3C_CICOSCPRERATIO_SHFACTOR_CO(cfg->sc.shfactor) |
++                  S3C_CICOSCPRERATIO_PREHORRATIO_CO(cfg->sc.prehratio) |
++                  S3C_CICOSCPRERATIO_PREVERRATIO_CO(cfg->sc.prevratio),
++                  cfg->regs + S3C_CICOSCPRERATIO);
++
++              writel(S3C_CICOSCPREDST_PREDSTWIDTH_CO(cfg->sc.predst_x) |
++                  S3C_CICOSCPREDST_PREDSTHEIGHT_CO(cfg->sc.predst_y),
++                  cfg->regs + S3C_CICOSCPREDST);
++
++              /* Differ from Preview */
++              if (cfg->sc.scalerbypass)
++                      cmd |= S3C_CICOSCCTRL_SCALERBYPASS_CO;
++
++              /* Differ from Codec */
++              if (cfg->dst_fmt & CAMIF_RGB24)
++                      cmd |= S3C_CICOSCCTRL_OUTRGB_FMT_RGB888;
++              else
++                      cmd |= S3C_CICOSCCTRL_OUTRGB_FMT_RGB565;
++
++              if (cfg->sc.scaleup_h & cfg->sc.scaleup_v)
++                      cmd |=
++                          S3C_CICOSCCTRL_SCALEUP_H | S3C_CICOSCCTRL_SCALEUP_V;
++
++              writel(cmd |
++                  S3C_CICOSCCTRL_MAINHORRATIO_CO(cfg->sc.mainhratio) |
++                  S3C_CICOSCCTRL_MAINVERRATIO_CO(cfg->sc.mainvratio),
++                  cfg->regs + S3C_CICOSCCTRL);
++
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++              writel(S3C_CIPRSCPRERATIO_SHFACTOR_PR(cfg->sc.shfactor) |
++                  S3C_CIPRSCPRERATIO_PREHORRATIO_PR(cfg->sc.prehratio) |
++                  S3C_CIPRSCPRERATIO_PREVERRATIO_PR(cfg->sc.prevratio),
++                  cfg->regs + S3C_CIPRSCPRERATIO);
++
++              writel(S3C_CIPRSCPREDST_PREDSTWIDTH_PR(cfg->sc.predst_x) |
++                  S3C_CIPRSCPREDST_PREDSTHEIGHT_PR(cfg->sc.predst_y),
++                  cfg->regs + S3C_CIPRSCPREDST);
++
++              if (cfg->dst_fmt & CAMIF_RGB24)
++                      cmd |= S3C_CIPRSCCTRL_OUTRGB_FMT_PR_RGB888;
++              else
++                      cmd |= S3C_CIPRSCCTRL_OUTRGB_FMT_PR_RGB565;
++
++              if (cfg->sc.scaleup_h & cfg->sc.scaleup_v)
++                      cmd |= (1 << 30) | (1 << 29);
++
++              writel(cmd |
++                  S3C_CIPRSCCTRL_MAINHORRATIO_PR(cfg->sc.mainhratio) |
++                  S3C_CIPRSCCTRL_MAINVERRATIO_PR(cfg->sc.mainvratio),
++                  cfg->regs + S3C_CIPRSCCTRL);
++
++      } else
++              printk(KERN_ERR "Invalid DMA type\n");
++
++      return 0;
++}
++#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++static inline int s3c_camif_set_ratio(camif_cfg_t *cfg)
++{
++      u32 cmd = 0;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++
++              writel(S3C_CICOSCPRERATIO_SHFACTOR_CO(cfg->sc.shfactor) |
++                  S3C_CICOSCPRERATIO_PREHORRATIO_CO(cfg->sc.prehratio) |
++                  S3C_CICOSCPRERATIO_PREVERRATIO_CO(cfg->sc.prevratio),
++                  cfg->regs + S3C_CICOSCPRERATIO);
++
++              writel(S3C_CICOSCPREDST_PREDSTWIDTH_CO(cfg->sc.predst_x) |
++                  S3C_CICOSCPREDST_PREDSTHEIGHT_CO(cfg->sc.predst_y),
++                  cfg->regs + S3C_CICOSCPREDST);
++
++              if (cfg->sc.scalerbypass)
++                      cmd |= S3C_CICOSCCTRL_SCALERBYPASS_CO;
++
++              if (cfg->sc.scaleup_h & cfg->sc.scaleup_v)
++                      cmd |=
++                          S3C_CICOSCCTRL_SCALEUP_H | S3C_CICOSCCTRL_SCALEUP_V;
++
++              writel(cmd |
++                  S3C_CICOSCCTRL_MAINHORRATIO_CO(cfg->sc.mainhratio) |
++                  S3C_CICOSCCTRL_MAINVERRATIO_CO(cfg->sc.mainvratio),
++                  cfg->regs + S3C_CICOSCCTRL);
++
++      } else if (cfg->dma_type & CAMIF_PREVIEW) {
++
++              cmd |= S3C_CIPRSCCTRL_SAMPLE_PR;
++
++              writel(S3C_CIPRSCPRERATIO_SHFACTOR_PR(cfg->sc.shfactor) |
++                  S3C_CIPRSCPRERATIO_PREHORRATIO_PR(cfg->sc.prehratio) |
++                  S3C_CIPRSCPRERATIO_PREVERRATIO_PR(cfg->sc.prevratio),
++                  cfg->regs + S3C_CIPRSCPRERATIO);
++
++              writel(S3C_CIPRSCPREDST_PREDSTWIDTH_PR(cfg->sc.predst_x) |
++                  S3C_CIPRSCPREDST_PREDSTHEIGHT_PR(cfg->sc.predst_y),
++                  cfg->regs + S3C_CIPRSCPREDST);
++
++              if (cfg->dst_fmt & CAMIF_RGB24)
++                      cmd |= S3C_CIPRSCCTRL_RGBFORMAT_24;
++
++              if (cfg->sc.scaleup_h & cfg->sc.scaleup_v)
++                      cmd |= (1 << 29) | (1 << 28);
++
++              writel(cmd |
++                  S3C_CIPRSCCTRL_MAINHORRATIO_PR(cfg->sc.mainhratio) |
++                  S3C_CIPRSCCTRL_MAINVERRATIO_PR(cfg->sc.mainvratio),
++                  cfg->regs + S3C_CIPRSCCTRL);
++
++      } else
++              printk(KERN_ERR "Invalid DMA type\n");
++
++      return 0;
++}
++#endif
++
++static int s3c_camif_calc_ratio(unsigned int src_width, unsigned int dst_width,
++    unsigned int *ratio, unsigned int *shift)
++{
++      if (src_width >= 64 * dst_width) {
++              printk(KERN_ERR "Out of pre-scaler range: "
++                  "src_width / dst_width = %d (< 64)\n",
++                  src_width / dst_width);
++              return 1;
++      }
++      if (src_width >= 32 * dst_width) {
++              *shift = 5;
++      } else if (src_width >= 16 * dst_width) {
++              *shift = 4;
++      } else if (src_width >= 8 * dst_width) {
++              *shift = 3;
++      } else if (src_width >= 4 * dst_width) {
++              *shift = 2;
++      } else if (src_width >= 2 * dst_width) {
++              *shift = 1;
++      } else {
++              *shift = 0;
++      }
++
++      *ratio = 1 << *shift;
++
++      return 0;
++}
++
++static int s3c_camif_setup_scaler(camif_cfg_t *cfg)
++{
++      int tx = cfg->target_x, ty = cfg->target_y;
++      int sx, sy;
++
++      if (tx <= 0 || ty <= 0) {
++              printk(KERN_ERR "Invalid target size\n");
++              return -1;
++      }
++
++      sx = cfg->cis->source_x -
++          (cfg->cis->win_hor_ofst + cfg->cis->win_hor_ofst2);
++      sy = cfg->cis->source_y -
++          (cfg->cis->win_ver_ofst + cfg->cis->win_hor_ofst2);
++
++      if (sx <= 0 || sy <= 0) {
++              printk(KERN_ERR "Invalid source size\n");
++              return -1;
++      }
++
++      cfg->sc.modified_src_x = sx;
++      cfg->sc.modified_src_y = sy;
++
++      /* Pre-scaler control register 1 */
++      s3c_camif_calc_ratio(sx, tx, &cfg->sc.prehratio, &cfg->sc.hfactor);
++      s3c_camif_calc_ratio(sy, ty, &cfg->sc.prevratio, &cfg->sc.vfactor);
++
++      if (cfg->dma_type & CAMIF_PREVIEW) {
++              if (sx / cfg->sc.prehratio > 640) {
++                      printk(KERN_INFO "Internal preview line buffer length "
++                          "is 640 pixels\n");
++                      printk(KERN_INFO "Decrease the resolution or adjust "
++                          "window offset values appropriately\n");
++              }
++      }
++
++      cfg->sc.shfactor = 10 - (cfg->sc.hfactor + cfg->sc.vfactor);
++
++      /* Pre-scaler control register 2 */
++      cfg->sc.predst_x = sx / cfg->sc.prehratio;
++      cfg->sc.predst_y = sy / cfg->sc.prevratio;
++
++      /* Main-scaler control register */
++      cfg->sc.mainhratio = (sx << 8) / (tx << cfg->sc.hfactor);
++      cfg->sc.mainvratio = (sy << 8) / (ty << cfg->sc.vfactor);
++
++      cfg->sc.scaleup_h = sx <= tx;
++      cfg->sc.scaleup_v = sy <= ty;
++
++      s3c_camif_set_ratio(cfg);
++      s3c_camif_set_target_area(cfg);
++
++      return 0;
++}
++
++/*************************************************************************
++ * Format part
++ ************************************************************************/
++int s3c_camif_set_source_format(camif_cis_t *cis)
++{
++      camif_cfg_t *cfg = s3c_camif_get_fimc_object(CODEC_MINOR);
++      unsigned int cmd = 0;
++
++      /* Configure CISRCFMT --Source Format */
++      if (cis->itu_fmt & CAMIF_ITU601)
++              cmd = CAMIF_ITU601;
++      else {
++              assert(cis->itu_fmt & CAMIF_ITU656);
++              cmd = CAMIF_ITU656;
++      }
++
++      cmd |= S3C_CISRCFMT_SOURCEHSIZE(cis->source_x) |
++          S3C_CISRCFMT_SOURCEVSIZE(cis->source_y);
++
++      /* Order422 */
++      cmd |= cis->order422;
++      writel(cmd, cfg->regs + S3C_CISRCFMT);
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++      cmd = cis->order422 >> 14;
++      writel((readl(cfg->regs + S3C_CICOCTRL) & ~(0x3 << 0)) | cmd,
++          cfg->regs + S3C_CICOCTRL);
++#endif
++
++      return 0;
++}
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++static int s3c_camif_set_target_format(camif_cfg_t *cfg)
++{
++      unsigned int cmd = 0;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              cmd |= S3C_CICOTRGFMT_TARGETHSIZE_CO(cfg->target_x) |
++                  S3C_CICOTRGFMT_TARGETVSIZE_CO(cfg->target_y);
++
++              if (cfg->dst_fmt & CAMIF_YCBCR420)
++                      cmd |= S3C_CICOTRGFMT_OUT422_420 |
++                          S3C_CICOTRGFMT_IN422_422;
++              else if (cfg->dst_fmt & CAMIF_YCBCR422)
++                      cmd |= (S3C_CICOTRGFMT_OUT422_422 |
++                          S3C_CICOTRGFMT_IN422_422);
++              else if ((cfg->dst_fmt & CAMIF_RGB24) ||
++                         (cfg->dst_fmt & CAMIF_RGB16))
++                      cmd |= (S3C_CICOTRGFMT_OUT422_422 |
++                          S3C_CICOTRGFMT_IN422_422) | (1 << 29);
++              else
++                      printk(KERN_ERR "Invalid target format\n");
++              writel(cmd, cfg->regs + S3C_CICOTRGFMT);
++      } else {
++              assert(cfg->dma_type & CAMIF_PREVIEW);
++
++              cmd = readl(cfg->regs + S3C_CIPRTRGFMT);
++              cmd &= ~(S3C_CIPRTRGFMT_TARGETHSIZE_PR(0x1fff) |
++                  S3C_CIPRTRGFMT_TARGETVSIZE_PR(0x1fff));
++              cmd |= S3C_CIPRTRGFMT_TARGETHSIZE_PR(cfg->target_x) |
++                  S3C_CIPRTRGFMT_TARGETVSIZE_PR(cfg->target_y);
++
++              writel(cmd | (2 << 30), cfg->regs + S3C_CIPRTRGFMT);
++      }
++
++      return 0;
++}
++#elif defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++static int s3c_camif_set_target_format(camif_cfg_t *cfg)
++{
++      unsigned int cmd = 0;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              cmd |= S3C_CICOTRGFMT_TARGETHSIZE_CO(cfg->target_x) |
++                  S3C_CICOTRGFMT_TARGETVSIZE_CO(cfg->target_y);
++
++              if (cfg->dst_fmt & CAMIF_YCBCR420)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR420OUT;
++              else if (cfg->dst_fmt & CAMIF_YCBCR422)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUT;
++              else if (cfg->dst_fmt & CAMIF_YCBCR422I)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUTINTERLEAVE;
++              else if ((cfg->dst_fmt & CAMIF_RGB24) ||
++                         (cfg->dst_fmt & CAMIF_RGB16))
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_RGBOUT;
++              else
++                      printk(KERN_ERR "Invalid target format\n");
++              writel(cmd, cfg->regs + S3C_CICOTRGFMT);
++      } else {
++              assert(cfg->dma_type & CAMIF_PREVIEW);
++
++              cmd = readl(cfg->regs + S3C_CIPRTRGFMT);
++              cmd &= ~(S3C_CIPRTRGFMT_TARGETHSIZE_PR(0x1fff) |
++                  S3C_CIPRTRGFMT_TARGETVSIZE_PR(0x1fff));
++              cmd |= S3C_CIPRTRGFMT_TARGETHSIZE_PR(cfg->target_x) |
++                  S3C_CIPRTRGFMT_TARGETVSIZE_PR(cfg->target_y);
++
++              if (cfg->dst_fmt & CAMIF_YCBCR420)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR420OUT;
++              else if (cfg->dst_fmt & CAMIF_YCBCR422)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUT;
++              else if (cfg->dst_fmt & CAMIF_YCBCR422I)
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_YCBCR422OUTINTERLEAVE;
++              else if ((cfg->dst_fmt & CAMIF_RGB24) ||
++                       (cfg->dst_fmt & CAMIF_RGB16))
++                      cmd |= S3C_CICOTRGFMT_OUTFORMAT_RGBOUT;
++              else
++                      printk(KERN_ERR "Invalid target format\n");
++
++              writel(cmd, cfg->regs + S3C_CIPRTRGFMT);
++      }
++
++      return 0;
++}
++#endif
++
++/*************************************************************************
++ * Control part
++ ************************************************************************/
++int s3c_camif_control_fimc(camif_cfg_t *cfg)
++{
++      if (s3c_camif_request_memory(cfg)) {
++              printk(KERN_ERR "Instead of using consistent_alloc(). "
++                  "Let me use dedicated mem for DMA\n");
++              return -1;
++      }
++
++      s3c_camif_setup_input_path(cfg);
++
++      if (s3c_camif_setup_scaler(cfg)) {
++              printk(KERN_ERR "Preview scaler fault: "
++                  "change WinHorOfset or target size\n");
++              return 1;
++      }
++
++      s3c_camif_set_target_format(cfg);
++
++      if (s3c_camif_setup_dma(cfg)) {
++              printk(KERN_ERR "DMA burst length error\n");
++              return 1;
++      }
++
++      s3c_camif_setup_output_path(cfg);
++
++      return 0;
++}
++
++int s3c_camif_start_dma(camif_cfg_t *cfg)
++{
++      unsigned int n_cmd = readl(cfg->regs + S3C_CIIMGCPT);
++      unsigned int val;
++
++      switch(cfg->capture_enable) {
++      case CAMIF_BOTH_DMA_ON:
++              s3c_camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */
++
++              /* For Codec */
++              val = readl(cfg->regs + S3C_CICOSCCTRL);
++              val |= S3C_CICOSCCTRL_COSCALERSTART;
++              writel(val, cfg->regs + S3C_CICOSCCTRL);
++
++              /* For Preview */
++              val = readl(cfg->regs + S3C_CIPRSCCTRL);
++              val |= S3C_CIPRSCCTRL_START;
++              writel(val, cfg->regs + S3C_CIPRSCCTRL);
++
++              n_cmd |=
++                  S3C_CIIMGCPT_IMGCPTEN_COSC | S3C_CIIMGCPT_IMGCPTEN_PRSC;
++              break;
++
++      case CAMIF_DMA_ON:
++              s3c_camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */
++
++              if (cfg->dma_type & CAMIF_CODEC) {
++                      val = readl(cfg->regs + S3C_CICOSCCTRL);
++                      val |= S3C_CICOSCCTRL_COSCALERSTART;
++                      writel(val, cfg->regs + S3C_CICOSCCTRL);
++
++                      n_cmd |= S3C_CIIMGCPT_IMGCPTEN_COSC;
++
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++                      n_cmd |= (1 << 24);
++#endif
++              } else {
++                      val = readl(cfg->regs + S3C_CIPRSCCTRL);
++                      val |= S3C_CIPRSCCTRL_START;
++                      writel(val, cfg->regs + S3C_CIPRSCCTRL);
++                      n_cmd |= S3C_CIIMGCPT_IMGCPTEN_PRSC;
++              }
++
++              /* wait until Sync Time expires */
++              /* First settting, to wait VSYNC fall  */
++              /* By VESA spec,in 640x480 @60Hz
++                 MAX Delay Time is around 64us which "while" has.*/
++              while (S3C_CICOSTATUS_VSYNC &
++                  readl(cfg->regs + S3C_CICOSTATUS));
++              break;
++
++      default:
++              break;
++      }
++
++#if defined(CONFIG_CPU_S3C2443)
++      if (cfg->dma_type & CAMIF_CODEC) {
++              if (cfg->dst_fmt & CAMIF_RGB24)
++                      n_cmd |= 3 << 25;
++              else if (cfg->dst_fmt & CAMIF_RGB16)
++                      n_cmd |= 1 << 25;
++              else if (cfg->dst_fmt & CAMIF_YCBCR420)
++                      n_cmd |= 2 << 25;
++      }
++#endif
++
++      val = readl(cfg->regs + S3C_CIIMGCPT);
++      val &= ~(0x7 << 29);
++      writel(val | n_cmd | S3C_CIIMGCPT_IMGCPTEN, cfg->regs + S3C_CIIMGCPT);
++
++      return 0;
++}
++
++int s3c_camif_stop_dma(camif_cfg_t *cfg)
++{
++      unsigned int n_cmd = readl(cfg->regs + S3C_CIIMGCPT);
++      unsigned int val;
++
++      switch(cfg->capture_enable) {
++      case CAMIF_BOTH_DMA_OFF:
++              val = readl(cfg->regs + S3C_CICOSCCTRL);
++              val &= ~S3C_CICOSCCTRL_COSCALERSTART;
++              writel(val, cfg->regs + S3C_CICOSCCTRL);
++
++              val = readl(cfg->regs + S3C_CIPRSCCTRL);
++              val &= ~S3C_CIPRSCCTRL_START;
++              writel(val, cfg->regs + S3C_CIPRSCCTRL);
++
++              n_cmd = 0;
++              break;
++
++      case CAMIF_DMA_OFF_L_IRQ: /* fall thru */
++      case CAMIF_DMA_OFF:
++              if (cfg->dma_type & CAMIF_CODEC) {
++                      val = readl(cfg->regs + S3C_CICOSCCTRL);
++                      val &= ~S3C_CICOSCCTRL_COSCALERSTART;
++                      writel(val, cfg->regs + S3C_CICOSCCTRL);
++                      n_cmd &= ~S3C_CIIMGCPT_IMGCPTEN_COSC;
++
++                      if (!(n_cmd & S3C_CIIMGCPT_IMGCPTEN_PRSC))
++                              n_cmd = 0;
++              } else {
++                      val = readl(cfg->regs + S3C_CIPRSCCTRL);
++                      val &= ~S3C_CIPRSCCTRL_START;
++                      writel(val, cfg->regs + S3C_CIPRSCCTRL);
++
++                      n_cmd &= ~S3C_CIIMGCPT_IMGCPTEN_PRSC;
++
++                      if (!(n_cmd & S3C_CIIMGCPT_IMGCPTEN_COSC))
++                              n_cmd = 0;
++              }
++
++              break;
++
++      default:
++              printk(KERN_ERR "Unexpected DMA control\n");
++      }
++
++      writel(n_cmd, cfg->regs + S3C_CIIMGCPT);
++
++      if (cfg->capture_enable == CAMIF_DMA_OFF_L_IRQ) { /* Last IRQ  */
++              if (cfg->dma_type & CAMIF_CODEC) {
++                      val = readl(cfg->regs + S3C_CICOCTRL);
++                      val |= S3C_CICOCTRL_LASTIRQEN;
++                      writel(val, cfg->regs + S3C_CICOCTRL);
++              } else {
++                      val = readl(cfg->regs + S3C_CIPRCTRL);
++                      val |= S3C_CIPRCTRL_LASTIRQEN_ENABLE;
++                      writel(val, cfg->regs + S3C_CIPRCTRL);
++              }
++      }
++
++      return 0;
++}
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++int s3c_camif_start_codec_msdma(camif_cfg_t *cfg)
++{
++      int ret = 0;
++      u32 val;
++
++      val = readl(cfg->regs + S3C_MSCOCTRL);
++      val &= ~(1 << 0);
++      writel(val, cfg->regs + S3C_MSCOCTRL);
++
++      val = readl(cfg->regs + S3C_MSCOCTRL);
++      val |= (1 << 0);
++      writel(val, cfg->regs + S3C_MSCOCTRL);
++
++      return ret;
++}
++#endif
++
++int s3c_camif_start_preview_msdma(camif_cfg_t * cfg)
++{
++      unsigned int val;
++      int ret = 0;
++
++#if !defined(CONFIG_CPU_S3C6400) && !defined(CONFIG_CPU_S3C6410)
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val &= ~(1 << 0);
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++#endif
++      val = readl(cfg->regs + S3C_CIMSCTRL);
++      val |= (1 << 0);
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      while(!readl(cfg->regs + S3C_CIMSCTRL) & (1 << 6));
++
++      return ret;
++}
++
++void s3c_camif_change_flip(camif_cfg_t *cfg)
++{
++      unsigned int cmd = 0;
++
++      if (cfg->dma_type & CAMIF_CODEC) {
++              cmd  = readl(cfg->regs + S3C_CICOTRGFMT);
++              cmd &= ~((1 << 14) | (1 << 15));
++              cmd |= cfg->flip;
++              writel(cmd, cfg->regs + S3C_CICOTRGFMT);
++      } else {
++              /* if ROT90_Pr == 1, dma burst length must be 4 */
++              if (cfg->flip == CAMIF_ROTATE_90 ||
++                  cfg->flip == CAMIF_FLIP_ROTATE_270) {
++                      cmd = readl(cfg->regs + S3C_CIPRCTRL);
++                      cmd &= ~(0x3ff << 14);
++                      cmd |= (S3C_CICOCTRL_YBURST1_CO(4) |
++                          S3C_CICOCTRL_YBURST2_CO(4));
++                      writel(cmd, cfg->regs + S3C_CIPRCTRL);
++              }
++
++              cmd  = readl(cfg->regs + S3C_CIPRTRGFMT);
++              cmd &= ~(0x7 << 13);
++              cmd |= cfg->flip;
++              writel(cmd, cfg->regs + S3C_CIPRTRGFMT);
++      }
++}
++
++void s3c_camif_change_effect(camif_cfg_t *cfg)
++{
++      unsigned int val = readl(cfg->regs + S3C_CIIMGEFF);
++
++      val &= ~((1 << 28) | (1 << 27) | (1 << 26));
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++      val |= ((1 << 31) | (1 << 30));
++#endif
++
++      switch(cfg->effect) {
++      case CAMIF_SILHOUETTE:
++              val |= S3C_CIIMGEFF_FIN_SILHOUETTE;
++              break;
++
++      case CAMIF_EMBOSSING:
++              val |= S3C_CIIMGEFF_FIN_EMBOSSING;
++              break;
++
++      case CAMIF_ART_FREEZE:
++              val |= S3C_CIIMGEFF_FIN_ARTFREEZE;
++              break;
++
++      case CAMIF_NEGATIVE:
++              val |= S3C_CIIMGEFF_FIN_NEGATIVE;
++              break;
++
++      case CAMIF_ARBITRARY_CB_CR:
++              val |= S3C_CIIMGEFF_FIN_ARBITRARY;
++              break;
++
++      case CAMIF_BYPASS:
++      default:
++              break;
++      }
++
++      writel(val, cfg->regs + S3C_CIIMGEFF);
++}
++
++int s3c_camif_do_postprocess(camif_cfg_t *cfg)
++{
++      unsigned int val = readl(cfg->regs + S3C_CIMSCTRL);
++
++      if (cfg->dst_fmt & CAMIF_YCBCR420)
++              val |= 1 << 1;
++      else
++              val &= ~(1 << 1);
++
++      val &= ~(1 << 0);
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      val |= 1 << 0;
++      writel(val, cfg->regs + S3C_CIMSCTRL);
++
++      printk(KERN_INFO "Postprocessing started\n");
++
++      while(!readl(cfg->regs + S3C_CIMSCTRL) & (1 << 6));
++
++      printk(KERN_INFO "Postprocessing finished\n");
++
++      return 0;
++}
++
++int s3c_camif_set_offset(camif_cis_t *cis)
++{
++      camif_cfg_t *cfg = s3c_camif_get_fimc_object(CODEC_MINOR);
++      unsigned int h = cis->win_hor_ofst;     /* Camera input offset ONLY */
++      unsigned int v = cis->win_ver_ofst;     /* Camera input offset ONLY */
++      unsigned int h2 = cis->win_hor_ofst2;   /* Camera input offset ONLY */
++      unsigned int v2 = cis->win_ver_ofst2;   /* Camera input offset ONLY */
++
++      /*Clear Overflow */
++      writel(S3C_CIWDOFST_CLROVCOFIY | S3C_CIWDOFST_CLROVCOFICB |
++          S3C_CIWDOFST_CLROVCOFICR | S3C_CIWDOFST_CLROVPRFICB |
++          S3C_CIWDOFST_CLROVPRFICR, cfg->regs + S3C_CIWDOFST);
++
++      writel(0, cfg->regs + S3C_CIWDOFST);
++
++      if (!h && !v) {
++              writel(0, cfg->regs + S3C_CIWDOFST);
++              writel(0, cfg->regs + S3C_CIDOWSFT2);
++              return 0;
++      }
++
++      writel(S3C_CIWDOFST_WINOFSEN | S3C_CIWDOFST_WINHOROFST(h) |
++          S3C_CIWDOFST_WINVEROFST(v), cfg->regs + S3C_CIWDOFST);
++      writel(S3C_CIDOWSFT2_WINHOROFST2(h) | S3C_CIDOWSFT2_WINVEROFST2(v),
++          cfg->regs + S3C_CIDOWSFT2);
++      writel(S3C_CIDOWSFT2_WINHOROFST2(h2) | S3C_CIDOWSFT2_WINVEROFST2(v2),
++          cfg->regs + S3C_CIDOWSFT2);
++
++      return 0;
++}
++
++void s3c_camif_set_priority(int flag)
++{
++      unsigned int val;
++
++      if (flag) {
++              irq_old_priority = readl(S3C64XX_PRIORITY);
++              val = irq_old_priority;
++              val &= ~(3 << 7);
++              writel(val, S3C64XX_PRIORITY);
++
++              /* Arbiter 1, REQ2 first */
++              val |=  (1 << 7);
++              writel(val, S3C64XX_PRIORITY);
++
++              /* Disable Priority Rotate */
++              val &= ~(1 << 1);
++              writel(val, S3C64XX_PRIORITY);
++      } else
++              writel(irq_old_priority, S3C64XX_PRIORITY);
++}
++
++/*************************************************************************
++ * Interrupt part
++ ************************************************************************/
++void s3c_camif_enable_lastirq(camif_cfg_t *cfg)
++{
++      unsigned int val;
++
++      if (cfg->capture_enable == CAMIF_BOTH_DMA_ON ||
++          (cfg->dma_type & CAMIF_CODEC)) {
++              val = readl(cfg->regs + S3C_CICOCTRL);
++              val |= S3C_CICOCTRL_LASTIRQEN;
++              writel(val, cfg->regs + S3C_CICOCTRL);
++      }
++
++      if (cfg->capture_enable == CAMIF_BOTH_DMA_ON ||
++          !(cfg->dma_type & CAMIF_CODEC)) {
++              val = readl(cfg->regs + S3C_CIPRCTRL);
++              val |= S3C_CIPRCTRL_LASTIRQEN_ENABLE;
++              writel(val, cfg->regs + S3C_CIPRCTRL);
++      }
++}
++
++void s3c_camif_disable_lastirq(camif_cfg_t *cfg)
++{
++      unsigned int val;
++
++      if (cfg->capture_enable == CAMIF_BOTH_DMA_ON ||
++          (cfg->dma_type & CAMIF_CODEC)) {
++              val = readl(cfg->regs + S3C_CICOCTRL);
++              val &= ~S3C_CICOCTRL_LASTIRQEN;
++              writel(val, cfg->regs + S3C_CICOCTRL);
++      }
++
++      if (cfg->capture_enable == CAMIF_BOTH_DMA_ON ||
++          !(cfg->dma_type & CAMIF_CODEC)) {
++              val = readl(cfg->regs + S3C_CIPRCTRL);
++              val &= ~S3C_CIPRCTRL_LASTIRQEN_ENABLE;
++              writel(val, cfg->regs + S3C_CIPRCTRL);
++      }
++}
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++void s3c_camif_clear_irq(int irq)
++{
++      camif_cfg_t *cfg = s3c_camif_get_fimc_object(CODEC_MINOR);
++      unsigned int val = 0;
++
++      if (irq == IRQ_CAMIF_C) {
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val |= (1 << 19);
++      } else if (irq == IRQ_CAMIF_P) {
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val |= (1 << 18);
++      }
++
++      writel(val, cfg->regs + S3C_CIGCTRL);
++}
++#else
++void s3c_camif_clear_irq(int irq)
++{
++}
++#endif
++
++/*************************************************************************
++ * Initialize part
++ ************************************************************************/
++#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++static int s3c_camif_set_gpio(void)
++{
++      s3c2410_gpio_cfgpin(S3C2440_GPJ0, S3C2440_GPJ0_CAMDATA0);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ1, S3C2440_GPJ1_CAMDATA1);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ2, S3C2440_GPJ2_CAMDATA2);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ3, S3C2440_GPJ3_CAMDATA3);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ4, S3C2440_GPJ4_CAMDATA4);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ5, S3C2440_GPJ5_CAMDATA5);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ6, S3C2440_GPJ6_CAMDATA6);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ7, S3C2440_GPJ7_CAMDATA7);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ8, S3C2440_GPJ8_CAMPCLK);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ9, S3C2440_GPJ9_CAMVSYNC);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ10, S3C2440_GPJ10_CAMHREF);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ11, S3C2440_GPJ11_CAMCLKOUT);
++      s3c2410_gpio_cfgpin(S3C2440_GPJ12, S3C2440_GPJ12_CAMRESET);
++
++      writel(0x1fff, S3C2443_GPJDN);
++
++      return 0;
++}
++#elif defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++static int s3c_camif_set_gpio(void)
++{
++      s3c_gpio_cfgpin(S3C64XX_GPF(5), S3C64XX_GPF5_CAMIF_YDATA0);
++      s3c_gpio_cfgpin(S3C64XX_GPF(6), S3C64XX_GPF6_CAMIF_YDATA1);
++      s3c_gpio_cfgpin(S3C64XX_GPF(7), S3C64XX_GPF7_CAMIF_YDATA2);
++      s3c_gpio_cfgpin(S3C64XX_GPF(8), S3C64XX_GPF8_CAMIF_YDATA3);
++      s3c_gpio_cfgpin(S3C64XX_GPF(9), S3C64XX_GPF9_CAMIF_YDATA4);
++      s3c_gpio_cfgpin(S3C64XX_GPF(10), S3C64XX_GPF10_CAMIF_YDATA5);
++      s3c_gpio_cfgpin(S3C64XX_GPF(11), S3C64XX_GPF11_CAMIF_YDATA6);
++      s3c_gpio_cfgpin(S3C64XX_GPF(12), S3C64XX_GPF12_CAMIF_YDATA7);
++      s3c_gpio_cfgpin(S3C64XX_GPF(2), S3C64XX_GPF2_CAMIF_PCLK);
++      s3c_gpio_cfgpin(S3C64XX_GPF(4), S3C64XX_GPF4_CAMIF_VSYNC);
++      s3c_gpio_cfgpin(S3C64XX_GPF(1), S3C64XX_GPF1_CAMIF_HREF);
++      s3c_gpio_cfgpin(S3C64XX_GPF(0), S3C64XX_GPF0_CAMIF_CLK);
++      s3c_gpio_cfgpin(S3C64XX_GPF(3), S3C64XX_GPF3_CAMIF_nRST);
++
++      writel(0, S3C64XX_GPFPUD);
++
++      return 0;
++}
++#endif
++
++void s3c_camif_reset(int is, int delay)
++{
++      camif_cfg_t *cfg = s3c_camif_get_fimc_object(CODEC_MINOR);
++      unsigned int val;
++      unsigned int tmp;
++
++      switch (is) {
++      case CAMIF_RESET:
++              tmp = readl(cfg->regs + S3C_CISRCFMT);
++
++              if (tmp &= (1 << 31)) {
++                      /* ITU-R BT 601 */
++                      val = readl(cfg->regs + S3C_CIGCTRL);
++                      val |= S3C_CIGCTRL_SWRST;
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++                      val |= S3C_CIGCTRL_IRQ_LEVEL;
++#endif
++                      writel(val, cfg->regs + S3C_CIGCTRL);
++                      mdelay(1);
++
++                      val = readl(cfg->regs + S3C_CIGCTRL);
++                      val &= ~S3C_CIGCTRL_SWRST;
++                      writel(val, cfg->regs + S3C_CIGCTRL);
++              } else {
++                      /* ITU-R BT 656 */
++                      tmp = readl(cfg->regs + S3C_CISRCFMT);
++                      tmp |= (1 << 31);
++                      writel(tmp, cfg->regs + S3C_CISRCFMT);
++
++                      val = readl(cfg->regs + S3C_CIGCTRL);
++                      val |= S3C_CIGCTRL_SWRST;
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++                      val |= S3C_CIGCTRL_IRQ_LEVEL;
++#endif
++                      writel(val, cfg->regs + S3C_CIGCTRL);
++                      mdelay(1);
++
++                      val = readl(cfg->regs + S3C_CIGCTRL);
++                      val &= ~S3C_CIGCTRL_SWRST;
++                      writel(val, cfg->regs + S3C_CIGCTRL);
++
++                      tmp = readl(cfg->regs + S3C_CISRCFMT);
++                      tmp &= ~(1 << 31);
++                      writel(tmp, cfg->regs + S3C_CISRCFMT);
++              }
++
++              break;
++
++      case CAMIF_EX_RESET_AH:
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val |= S3C_CIGCTRL_CAMRST;
++              writel(val, cfg->regs + S3C_CIGCTRL);
++              udelay(200);
++
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val &= ~S3C_CIGCTRL_CAMRST;
++              writel(val, cfg->regs + S3C_CIGCTRL);
++              udelay(delay);
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K3AA)
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val |= S3C_CIGCTRL_CAMRST;
++              writel(val, cfg->regs + S3C_CIGCTRL);
++              udelay(200);
++#endif
++              break;
++
++      case CAMIF_EX_RESET_AL:
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val &= ~S3C_CIGCTRL_CAMRST;
++              writel(val, cfg->regs + S3C_CIGCTRL);
++              udelay(200);
++
++              val = readl(cfg->regs + S3C_CIGCTRL);
++              val |= S3C_CIGCTRL_CAMRST;
++              writel(val, cfg->regs + S3C_CIGCTRL);
++              udelay(delay);
++              break;
++
++      default:
++              break;
++      }
++}
++
++void s3c_camif_init(void)
++{
++      s3c_camif_reset(CAMIF_RESET, 0);
++      s3c_camif_set_gpio();
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camif.h linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camif.h
+--- linux-2.6.29-rc3.owrt/drivers/media/video/s3c_camif.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/s3c_camif.h   2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,404 @@
++/* drivers/media/video/s3c_camif.h
++ *
++ * Copyright (c) 2008 Samsung Electronics
++ *
++ * Samsung S3C Camera driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __S3C_CAMIF_H_
++#define __S3C_CAMIF_H_
++
++#ifdef __KERNEL__
++#include <linux/videodev.h>
++#include <linux/videodev2.h>
++#include <asm/types.h>
++#include <linux/i2c.h>
++#include <linux/video_decoder.h>
++#endif        /* __KERNEL__ */
++
++#if !defined(O_NONCAP)
++#define O_NONCAP O_TRUNC
++#endif
++
++#if defined(CAMIF_DEBUG)
++#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
++#else
++#define DPRINTK(fmt, args...)
++#endif
++
++#if defined(CAMIF_DEBUG)
++#define assert(expr) \
++      if(!(expr)) { \
++      printk( "Assertion failed! %s,%s,%s,line=%d\n", \
++      #expr,__FILE__,__FUNCTION__,__LINE__);          \
++      }
++#else
++#define assert(expr)
++#endif
++
++#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
++#define MEM_SIZE      0x08000000
++#define FIMC_VER      "3.0"
++#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2450) || defined(CONFIG_CPU_S3C2416)
++#define MEM_SIZE      0x04000000
++#define FIMC_VER      "2.3"
++#else
++#define MEM_SIZE      0x04000000
++#define FIMC_VER      "2.x"
++#endif
++
++#undef FSM_ON_PREVIEW
++#define FSM_ON_CODEC
++
++#undef USE_LAST_IRQ                   /* turn on if pp count is 1 */
++
++#define CODEC_DEV_NAME                        "CAMIF_CODEC"
++#define PREVIEW_DEV_NAME              "CAMIF_PREVIEW"
++
++#define CAMIF_DEV_NUM                 2
++#define FIMC_CODEC_INDEX              0
++#define FIMC_PREVIEW_INDEX            1
++
++#define BURST_ERR                     1
++#define RESERVED_MEM                  (15 * 1024 * 1024)
++#define YUV_MEM                               (10 * 1024 * 1024)
++#define RGB_MEM                               (RESERVED_MEM - YUV_MEM)
++
++#define CODEC_DEFAULT_WIDTH           640
++#define CODEC_DEFAULT_HEIGHT          480
++#define PREVIEW_DEFAULT_WIDTH         640
++#define PREVIEW_DEFAULT_HEIGHT                480
++
++#define CROP_DEFAULT_WIDTH            352
++#define CROP_DEFAULT_HEIGHT           272
++
++#define CODEC_DEFAULT_PPNUM           4
++#define PREVIEW_DEFAULT_PPNUM         4
++
++#define CODEC_MINOR                   12
++#define PREVIEW_MINOR                 13
++
++#define CHECK_FREQ                    5
++#define INSTANT_SKIP                  0
++#define INSTANT_GO                    1
++
++#define VID_HARDWARE_SAMSUNG_FIMC3X   236
++
++#define ZOOM_AT_A_TIME_IN_PIXELS      32
++#define ZOOM_IN_MAX                   640
++
++/* Codec or Preview Status */
++#define CAMIF_STARTED                 (1 << 1)
++#define CAMIF_STOPPED                 (1 << 2)
++#define CAMIF_INT_HAPPEN              (1 << 3)
++
++/* Codec or Preview  : Interrupt FSM */
++#define CAMIF_1st_INT                 (1 << 7)
++#define CAMIF_Xth_INT                 (1 << 8)
++#define CAMIF_Yth_INT                 (1 << 9)
++#define CAMIF_Zth_INT                 (1 << 10)
++#define CAMIF_NORMAL_INT              (1 << 11)
++#define CAMIF_DUMMY_INT                       (1 << 12)
++#define CAMIF_CONTINUOUS_INT          (1 << 13)
++#define CAMIF_SET_LAST_INT            (1 << 14)
++#define CAMIF_STOP_CAPTURE            (1 << 15)
++#define CAMIF_LAST_IRQ                        (1 << 16)
++#define CAMIF_PENDING_INT             0
++
++#define CAMIF_CAPTURE_SKIP_FRAMES     5
++
++/* CAMIF RESET Definition */
++#define CAMIF_RESET                   (1 << 0)
++#define CAMIF_EX_RESET_AL             (1 << 1)        /* Active Low */
++#define CAMIF_EX_RESET_AH             (1 << 2)        /* Active High */
++
++#define USER_EXIT                     (1 << 2)
++#define USER_ADD                      (1 << 1)
++#define SENSOR_INIT                   (1 << 0)
++
++#define SENSOR_MAX                    255
++#define SENSOR_QSVGA                  (1 << 12)
++#define SENSOR_UXGA                   (1 << 11)
++#define SENSOR_SVGA                   (1 << 10)
++#define SENSOR_SXGA                   (1 << 4)
++#define SENSOR_VGA                    (1 << 3)
++#define SENSOR_DEFAULT                        0
++
++#define SENSOR_WB                     (1 << 9)
++#define SENSOR_AF                     (1 << 8)
++#define SENSOR_MIRROR                 (1 << 7)
++#define SENSOR_ZOOMOUT                        (1 << 6)
++#define SENSOR_ZOOMIN                 (1 << 5)
++
++/* Global Status Definition */
++#define PWANT2START                   (1 << 0)
++#define CWANT2START                   (1 << 1)
++#define BOTH_STARTED                  (PWANT2START | CWANT2START)
++#define P_NOT_WORKING                 (1 << 4)
++#define C_WORKING                     (1 << 5)
++#define P_WORKING                     (1 << 6)
++#define C_NOT_WORKING                 (1 << 7)
++
++#define FORMAT_FLAGS_DITHER           0x01
++#define FORMAT_FLAGS_PACKED           0x02
++#define FORMAT_FLAGS_PLANAR           0x04
++#define FORMAT_FLAGS_RAW              0x08
++#define FORMAT_FLAGS_CrCb             0x10
++
++enum camif_itu_fmt {
++      CAMIF_ITU601 = (1 << 31),
++      CAMIF_ITU656 = 0,
++};
++
++/* It is possbie to use two device simultaneously */
++enum camif_dma_type {
++      CAMIF_PREVIEW = (1 << 0),
++      CAMIF_CODEC   = (1 << 1),
++};
++
++enum camif_order422 {
++      CAMIF_YCBYCR = 0,
++      CAMIF_YCRYCB = (1 << 14),
++      CAMIF_CBYCRY = (1 << 15),
++      CAMIF_CRYCBY = (1 << 15) | (1 << 14),
++};
++
++enum flip_mode {
++      CAMIF_FLIP = 0,
++      CAMIF_ROTATE_90 = (1 << 13),
++      CAMIF_FLIP_X = (1 << 14),
++      CAMIF_FLIP_Y = (1 << 15),
++      CAMIF_FLIP_MIRROR = (1 << 15) | (1 << 14),
++      CAMIF_FLIP_ROTATE_270 = (1 << 15) | (1 << 14) | (1 << 13),
++};
++
++enum camif_fmt {
++      CAMIF_YCBCR420 = (1 << 0),
++      CAMIF_YCBCR422 = (1 << 1),
++      CAMIF_YCBCR422I = (1 << 2),
++      CAMIF_RGB16 = (1 << 3),
++      CAMIF_RGB24 = (1 << 4),
++      CAMIF_RGB32 = (1 << 5),
++};
++
++enum camif_capturing {
++      CAMIF_BOTH_DMA_ON = (1 << 4),
++      CAMIF_DMA_ON = (1 << 3),
++      CAMIF_BOTH_DMA_OFF = (1 << 1),
++      CAMIF_DMA_OFF = (1 << 0),
++      CAMIF_DMA_OFF_L_IRQ = (1 << 5),
++};
++
++enum image_effect {
++      CAMIF_BYPASS,
++      CAMIF_ARBITRARY_CB_CR,
++      CAMIF_NEGATIVE,
++      CAMIF_ART_FREEZE,
++      CAMIF_EMBOSSING ,
++      CAMIF_SILHOUETTE,
++};
++
++enum input_channel{
++      CAMERA_INPUT,
++      MSDMA_FROM_CODEC,
++      MSDMA_FROM_PREVIEW,
++};
++
++enum output_channel{
++      CAMIF_OUT_PP,
++      CAMIF_OUT_FIFO,
++};
++
++typedef struct camif_performance
++{
++      int     frames;
++      int     framesdropped;
++      __u64   bytesin;
++      __u64   bytesout;
++      __u32   reserved[4];
++} camif_perf_t;
++
++typedef struct {
++      dma_addr_t      phys_y;
++      dma_addr_t      phys_cb;
++      dma_addr_t      phys_cr;
++      u8              *virt_y;
++      u8              *virt_cb;
++      u8              *virt_cr;
++      dma_addr_t      phys_rgb;
++      u8              *virt_rgb;
++} img_buf_t;
++
++/* this structure convers the CIWDOFFST, prescaler, mainscaler */
++typedef struct {
++      u32 modified_src_x;     /* After windows applyed to source_x */
++      u32 modified_src_y;
++      u32 hfactor;
++      u32 vfactor;
++      u32 shfactor;           /* SHfactor = 10 - ( hfactor + vfactor ) */
++      u32 prehratio;
++      u32 prevratio;
++      u32 predst_x;
++      u32 predst_y;
++      u32 scaleup_h;
++      u32 scaleup_v;
++      u32 mainhratio;
++      u32 mainvratio;
++      u32 scalerbypass;       /* only codec */
++      u32 zoom_in_cnt;
++} scaler_t;
++
++enum v4l2_status {
++      CAMIF_V4L2_INIT = (1 << 0),
++      CAMIF_v4L2_DIRTY = (1 << 1),
++};
++
++typedef struct {
++      struct semaphore        lock;
++      enum camif_itu_fmt      itu_fmt;
++      enum camif_order422     order422;
++      struct i2c_client       *sensor;
++      u32                     win_hor_ofst;
++      u32                     win_ver_ofst;
++      u32                     win_hor_ofst2;
++      u32                     win_ver_ofst2;
++      u32                     camclk;                 /* External Image Sensor Camera Clock */
++      u32                     source_x;
++      u32                     source_y;
++      u32                     polarity_pclk;
++      u32                     polarity_vsync;
++      u32                     polarity_href;
++      u32                     user;                   /* MAX 2 (codec, preview) */
++      u32                     irq_old_priority;       /* BUS PRIORITY register */
++      u32                     status;
++      u32                     init_sensor;            /* initializing sensor */
++      u32                     reset_type;             /* External Sensor Reset  Type */
++      u32                     reset_udelay;
++      u32                     zoom_in_cnt;
++} camif_cis_t;
++
++/* when  App want to change v4l2 parameter,
++ * we instantly store it into v4l2_t v2
++ * and then reflect it to hardware
++ */
++typedef struct v4l2 {
++      struct v4l2_fmtdesc     *fmtdesc;
++      struct v4l2_framebuffer frmbuf; /* current frame buffer */
++      struct v4l2_input       *input;
++      struct v4l2_output      *output;
++      enum v4l2_status        status;
++
++      /* crop */
++      struct v4l2_rect        crop_bounds;
++      struct v4l2_rect        crop_defrect;
++      struct v4l2_rect        crop_current;
++
++} v4l2_t;
++
++
++typedef struct camif_c_t {
++      struct video_device     *v;
++
++      /* V4L2 param only for v4l2 driver */
++      v4l2_t                  v2;
++      camif_cis_t             *cis;                   /* Common between Codec and Preview */
++
++      /* logical parameter */
++      wait_queue_head_t       waitq;
++      u32                     status;                 /* Start/Stop */
++      u32                     fsm;                    /* Start/Stop */
++      u32                     open_count;             /* duplicated */
++      int                     irq;
++      char                    shortname[16];
++      u32                     target_x;
++      u32                     target_y;
++      scaler_t                sc;
++      enum flip_mode          flip;
++      enum image_effect       effect;
++      enum camif_dma_type     dma_type;
++
++      /* 4 pingpong Frame memory */
++      u8                      *pp_virt_buf;
++      dma_addr_t              pp_phys_buf;
++      u32                     pp_totalsize;
++      u32                     pp_num;                 /* used pingpong memory number */
++      img_buf_t               img_buf[4];
++      enum camif_fmt          src_fmt;
++      enum camif_fmt          dst_fmt;
++      enum camif_capturing    capture_enable;
++      camif_perf_t            perf;
++      u32                     cur_frame_num;
++      u32                     auto_restart;           /* Only For Preview */
++      int                     input_channel;
++      int                     output_channel;
++      int                     buffer_size;
++      void                    *other;                 /* other camif_cfg_t */
++      u32                     msdma_status;           /* 0 : stop, 1 : start */
++      void __iomem            *regs;
++} camif_cfg_t;
++
++/*  Test Application Usage */
++typedef struct {
++      int src_x;
++      int src_y;
++      int dst_x;
++      int dst_y;
++      int src_fmt;
++      int dst_fmt;
++      int flip;
++      int awb;
++      int effect;
++      int input_channel;
++      int output_channel;
++      unsigned int h_offset;
++      unsigned int v_offset;
++      unsigned int h_offset2;
++      unsigned int v_offset2;
++} camif_param_t;
++
++/* Externs */
++extern camif_cfg_t* s3c_camif_get_fimc_object(int);
++extern int s3c_camif_start_dma(camif_cfg_t *);
++extern int s3c_camif_stop_dma(camif_cfg_t *);
++extern int s3c_camif_get_frame_num(camif_cfg_t *);
++extern unsigned char* s3c_camif_get_frame(camif_cfg_t *);
++extern int s3c_camif_control_fimc(camif_cfg_t *);
++extern void s3c_camif_reset(int, int);
++extern void s3c_camif_init(void);
++extern int s3c_camif_get_fifo_status(camif_cfg_t *);
++extern void s3c_camif_enable_lastirq(camif_cfg_t *);
++extern void s3c_camif_disable_lastirq(camif_cfg_t *);
++extern void s3c_camif_change_flip(camif_cfg_t *);
++extern void s3c_camif_change_effect(camif_cfg_t *);
++extern int s3c_camif_start_codec_msdma(camif_cfg_t *);
++extern int s3c_camif_set_clock(unsigned int camclk);
++extern void s3c_camif_disable_clock(void);
++extern int s3c_camif_start_preview_msdma(camif_cfg_t *);
++extern camif_cis_t* get_initialized_cis(void);
++extern void s3c_camif_clear_irq(int);
++extern int s3c_camif_set_source_format(camif_cis_t *);
++extern void s3c_camif_register_sensor(struct i2c_client *);
++extern void s3c_camif_unregister_sensor(struct i2c_client*);
++extern int s3c_camif_setup_dma(camif_cfg_t *);
++extern void s3c_camif_init_sensor(camif_cfg_t *);
++extern int s3c_camif_set_offset(camif_cis_t *);
++extern void s3c_camif_set_priority(int);
++extern void s3c_camif_open_sensor(camif_cis_t *);
++extern void s3c_camif_set_polarity(camif_cfg_t *cfg);
++
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/samsung/4xa_sensor.c linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/4xa_sensor.c
+--- linux-2.6.29-rc3.owrt/drivers/media/video/samsung/4xa_sensor.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/4xa_sensor.c  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,384 @@
++/*
++ *  Copyright (C) 2004 Samsung Electronics
++ *             SW.LEE <hitchcar@samsung.com>
++ *            - based on Russell King : pcf8583.c
++ *          - added  smdk24a0, smdk2440
++ *            - added  poseidon (s3c24a0+wavecom)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *  Driver for FIMC2.x Camera Decoder
++ *
++ */
++
++//#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/i2c-id.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++//#define CAMIF_DEBUG
++
++#include "../s3c_camif.h"
++#include "4xa_sensor.h"
++
++
++/*
++ * Samsung's original code:
++ *    .camclk         = 44000000,     / * for 20 fps: 44MHz, for 12 fps (more
++ *                                       stable): 26MHz * /
++ *
++ * Experimenting with the controls yielded the following:
++ *
++ * PLL_CLK gets divided according to TCMD.Div8_r (1,00h) and then by
++ * SEL_MAIN.Half_PCLK_Enable (5,8Fh) until it finally becomes PCLK.
++ *
++ * Div8_r = 0: 1/4, 1: 1/2 (default)
++ * Half_PCLK_Enable = 0: 1/1 (default), 1: 1/2
++ *
++ * Thus our 26.6 MHz MCLK becomes an 87.78 MHz PLL_CLK and eventually a PCLK
++ * of 43.89 MHz.
++ */
++
++#define       CAMCLK  26600000        /* 26.6 MHz */
++
++
++static struct i2c_driver sensor_driver;
++
++/* This is an abstract CIS sensor for MSDMA input. */
++
++camif_cis_t msdma_input = {
++      .itu_fmt        = CAMIF_ITU601,
++      .order422       = CAMIF_CBYCRY, /* another case: YCRYCB */
++      .camclk         = CAMCLK,
++      .source_x       = 800,
++      .source_y       = 600,
++      .win_hor_ofst   = 0,
++      .win_ver_ofst   = 0,
++      .win_hor_ofst2  = 0,
++      .win_ver_ofst2  = 0,
++      .polarity_pclk  = 0,
++      .polarity_vsync = 1,
++      .polarity_href  = 0,
++      .reset_type     = CAMIF_EX_RESET_AL,
++      .reset_udelay   = 5000,
++};
++
++camif_cis_t interlace_input = {
++      .itu_fmt        = CAMIF_ITU601,
++      .order422       = CAMIF_CBYCRY, /* another case: YCRYCB */
++      .camclk         = CAMCLK,
++      .source_x       = 800,
++      .source_y       = 600,
++      .win_hor_ofst   = 0,
++      .win_ver_ofst   = 0,
++      .win_hor_ofst2  = 0,
++      .win_ver_ofst2  = 0,
++      .polarity_pclk  = 0,
++      .polarity_vsync = 1,
++      .polarity_href  = 0,
++      .reset_type     = CAMIF_EX_RESET_AL,
++      .reset_udelay   = 5000,
++};
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++static camif_cis_t data = {
++      .itu_fmt        = CAMIF_ITU601,
++      .order422       = CAMIF_YCBYCR,
++      .camclk         = CAMCLK,
++      .source_x       = 800,
++      .source_y       = 600,
++      .win_hor_ofst   = 0,
++      .win_ver_ofst   = 0,
++      .win_hor_ofst2  = 0,
++      .win_ver_ofst2  = 0,
++      .polarity_pclk  = 0,
++      .polarity_vsync = 1,
++      .polarity_href  = 0,
++      .reset_type     = CAMIF_EX_RESET_AL,
++      .reset_udelay   = 5000,
++};
++
++s5k4xa_t s5k4ba_regs_mirror[S5K4BA_REGS];
++#else
++#error No samsung CIS moudule here !
++#endif
++
++camif_cis_t* get_initialized_cis(void)
++{
++      if (data.init_sensor == 0)
++              return NULL;
++
++      return &data;
++}
++
++#define CAM_ID 0x5a
++
++static unsigned short ignore[] = { I2C_CLIENT_END };
++static unsigned short normal_addr[] = { CAM_ID >> 1, I2C_CLIENT_END };
++static const unsigned short *forces[] = { NULL };
++
++static struct i2c_client_address_data addr_data = {
++      .normal_i2c     = normal_addr,
++      .probe          = ignore,
++      .ignore         = ignore,
++      .forces         = forces,
++};
++
++
++static unsigned char sensor_read(struct i2c_client *client,
++    unsigned char subaddr)
++{
++      unsigned char buf = subaddr;
++      struct i2c_msg msg = {
++              .addr   = client->addr,
++              .flags  = 0,
++              .len    = 1,
++              .buf    = &buf,
++      };
++
++      if (i2c_transfer(client->adapter, &msg, 1) != 1) {
++              printk(" I2C write Error\n");
++              return -EIO;
++      }
++
++      msg.flags = I2C_M_RD;
++      if (i2c_transfer(client->adapter, &msg, 1) != 1) {
++              printk(" I2C read Error\n");
++              return -EIO;
++      }
++
++      return buf;
++}
++
++static int
++sensor_write(struct i2c_client *client,
++           unsigned char subaddr, unsigned char val)
++{
++      unsigned char buf[2];
++      struct i2c_msg msg = {
++              .addr   = client->addr,
++              .flags  = 0,
++              .len    = 2,
++              .buf    = buf,
++      };
++
++      buf[0] = subaddr;
++      buf[1] = val;
++
++      return i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EIO;
++}
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++void inline sensor_init(struct i2c_client *sam_client)
++{
++      int i;
++
++      i = ARRAY_SIZE(s5k4ba_reg);
++      for (i = 0; i < S5K4BA_INIT_REGS; i++)
++              sensor_write(sam_client,
++                           s5k4ba_reg[i].subaddr, s5k4ba_reg[i].value);
++}
++#else
++#error No samsung CIS moudule !
++#endif
++
++static int
++s5k4xa_attach(struct i2c_adapter *adap, int addr, int kind)
++{
++      struct i2c_client *c;
++
++      c = kmalloc(sizeof(*c), GFP_KERNEL);
++      if (!c)
++              return -ENOMEM;
++
++      memset(c, 0, sizeof(struct i2c_client));
++
++      strcpy(c->name, "S5K4XA");
++      c->addr = addr;
++      c->adapter = adap;
++      c->driver = &sensor_driver;
++      i2c_set_clientdata(c, &data);
++      data.sensor = c;
++
++      s3c_camif_register_sensor(c);
++
++      return i2c_attach_client(c);
++}
++
++static int sensor_attach_adapter(struct i2c_adapter *adap)
++{
++      extern void om_3d7k_camera_on(void);
++      extern void om_3d7k_camera_off(void);
++      int ret;
++
++      s3c_camif_open_sensor(&data);
++
++      om_3d7k_camera_on();
++      ret = i2c_probe(adap, &addr_data, s5k4xa_attach);
++      om_3d7k_camera_off();
++      return ret;
++}
++
++static int sensor_detach(struct i2c_client *client)
++{
++      i2c_detach_client(client);
++      s3c_camif_unregister_sensor(client);
++      return 0;
++}
++
++/*
++ * Purpose:
++ * This function only for SVGA Camera : 4BA
++ */
++
++static int change_sensor_size(struct i2c_client *client, int size)
++{
++      int i;
++
++      switch (size) {
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++      case SENSOR_QSVGA:
++              for (i = 0; i < S5K4BA_QSVGA_REGS; i++)
++                      sensor_write(client, s5k4ba_reg_qsvga[i].subaddr,
++                                   s5k4ba_reg_qsvga[i].value);
++              break;
++
++      case SENSOR_SVGA:
++              for (i = 0; i < S5K4BA_SVGA_REGS; i++)
++                      sensor_write(client, s5k4ba_reg_svga[i].subaddr,
++                                   s5k4ba_reg_svga[i].value);
++              break;
++#else
++#error No samsung CIS moudule !
++#endif
++      default:
++              panic("4xa_sensor.c: unexpect value\n");
++      }
++
++      return 0;
++}
++
++static int change_sensor_wb(struct i2c_client *client, int type)
++{
++      printk("[ *** Page 0, 4XA Sensor White Balance Mode ***]\n");
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++      sensor_write(client, 0xFC, 0x0);
++      sensor_write(client, 0x30, type);
++#endif
++
++      switch(type){
++      case 0:
++      default:
++              printk(" -> AWB auto mode ]\n");
++              break;
++      case 1:
++              printk(" -> Indoor 3100 mode ]\n");
++              break;
++      case 2:
++              printk(" -> Outdoor 5100 mode ]\n");
++              break;
++      case 3:
++              printk(" -> Indoor 2000 mode ]\n");
++              break;
++      case 4:
++              printk(" -> AE/AWB halt ]\n");
++              break;
++      case 5:
++              printk(" -> Cloudy(6000) mode ]\n");
++              break;
++      case 6:
++              printk(" -> Sunny(8000) mode ]\n");
++              break;
++      }
++
++      return 0;
++}
++
++static int
++sensor_command(struct i2c_client *client, unsigned int cmd, void *arg)
++{
++      switch (cmd) {
++      case SENSOR_INIT:
++              sensor_init(client);
++              printk(KERN_INFO "External Camera initialized\n");
++              break;
++
++      case USER_ADD:
++              break;
++
++      case USER_EXIT:
++              break;
++
++      case SENSOR_QSVGA:
++              change_sensor_size(client, SENSOR_QSVGA);
++              break;
++
++      case SENSOR_VGA:
++              change_sensor_size(client, SENSOR_VGA);
++              break;
++
++      case SENSOR_SVGA:
++              change_sensor_size(client, SENSOR_SVGA);
++              break;
++
++      case SENSOR_SXGA:
++              change_sensor_size(client, SENSOR_SXGA);
++              break;
++
++      case SENSOR_UXGA:
++              change_sensor_size(client, SENSOR_UXGA);
++              break;
++/* Todo
++      case SENSOR_BRIGHTNESS:
++              change_sensor_setting();
++              break;
++*/
++      case SENSOR_WB:
++              printk("[ *** 4XA Sensor White Balance , No mode ***]\n");
++              change_sensor_wb(client, (int) arg);
++              break;
++
++      default:
++              panic("4xa_sensor.c: Unexpected Sensor Command\n");
++              break;
++      }
++
++      return 0;
++}
++
++static struct i2c_driver sensor_driver = {
++      .driver = {
++              .name = "s5k4xa",
++      },
++      .id = I2C_DRIVERID_S5K_4XA,
++      .attach_adapter = sensor_attach_adapter,
++      .detach_client = sensor_detach,
++      .command = sensor_command
++};
++
++static __init int camif_sensor_init(void)
++{
++      return i2c_add_driver(&sensor_driver);
++}
++
++
++static __init void camif_sensor_exit(void)
++{
++      i2c_del_driver(&sensor_driver);
++}
++
++module_init(camif_sensor_init)
++module_exit(camif_sensor_exit)
++
++MODULE_AUTHOR("Jinsung, Yang <jsgood.yang@samsung.com>");
++MODULE_DESCRIPTION("I2C Client Driver For FIMC V4L2 Driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/samsung/4xa_sensor.h linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/4xa_sensor.h
+--- linux-2.6.29-rc3.owrt/drivers/media/video/samsung/4xa_sensor.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/4xa_sensor.h  2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,2412 @@
++#ifndef _SAMSUNG_SXGA_H_
++#define _SAMSUNG_SXGA_H_
++
++/******************************************************************************
++ *  Display resolution standards
++ *
++ *    QCIF: 176 x 144
++ *    CIF: 352 x 288
++ *    QVGA: 320 x 240
++ *    VGA: 640 x 480
++ *    SVGA: 800 x 600
++ *    XGA: 1024 x 768
++ *    WXGA: 1280 x 800
++ *    QVGA: 1280 x 960
++ *    SXGA: 1280 x 1024
++ *    SXGA+: 1400 x 1050
++ *    WSXGA+: 1680 x 1050
++ *    UXGA: 1600 x 1200
++ *    WUXGA: 1920 x 1200
++ *    QXGA: 2048 x 1536
++ *****************************************************************************/
++
++//#include "../bits.h"
++
++/*
++ * Camera information
++ * FPC Label : Samsung MEGA Pixel Camera : V4220 REV06
++ * Modified by charles -Initial function of '3AA' test routine
++ * Modified and tested by YongHwui.Kim <yonghwui.kim@samsung.com> for S5K3AAEX
++ * Camera
++ */
++
++#define CHIP_DELAY 0xFF
++
++typedef struct samsung_t{
++        unsigned char subaddr;
++        unsigned char value;
++        unsigned char page;
++} s5k4xa_t;
++
++#ifdef CONFIG_CPU_S3C24A0A
++#define TRY_HIGH_CLOCK 1
++#endif
++
++/***************************************************
++ *  name:     S5K3AAEX EVT2 setfile
++ *  ver:              v2.61
++ *  history:
++ *    v0.0    start from 040908 setfile
++ *    v1.0    arange register
++ *    v1.01   change MCLK(25Mhz) and Frame rate(7fps)
++ *    v2.0    adjust register setting for 3AA EVT2
++ *            - color correction, RGB shading off, hsync start position,
++ *               Mirror, fps
++ *            - Color Tuning, YGRPDLY
++ *    v2.1    change Frame rate(7.5fps) and Total gain to x4
++ *            (because of reducing visual noise at low illumination)
++ *            - change BPRM AGC Max and FrameAE start
++ *            improve AE speed
++ *    v2.2    modify AWB G gain and solve 50hz flicker detection fail in
++ *            25MHz 7.5fps
++ *    v2.3    Adjust gamma, Dark Slice, white point, Hue gain,
++ *            White Balance B control, Y gain On, Digital Clamp On
++ *            lower AWB G gain
++ *    v2.4    Adjust AE window weight, Y Gamma, WhitePoint, Shading and BPR
++ *            Max Thres.
++ *    v2.41   Adjust AE/AWB window and AWB internal window boundary to
++ *            decrease skin color tracking
++ *    v2.411  special version for PSCDS
++ *    v2.412  RGB shading off
++ *    v2.5    Lens change STW to Sekonix
++ *            adjust White point and Y shading Coef (RGB shading off)
++ *    v2.6    New Tuning because of Full YC off and YCbCr Coef change
++ *            Gamma, Dark Slice, color matrix (not use), Color suppress
++ *            R Gain and DBPR agc MIN/MAX
++ *    v2.61   VCK inversion(data rising)
++ ****************************************************/
++
++#if defined(CONFIG_VIDEO_SAMSUNG_S5K4BA)
++
++/* For SVGA (800 x 600) */
++#if 1 /* from han */
++s5k4xa_t s5k4ba_reg[] =
++{
++      {0xfc,0x07},
++      {0x66,0x01},    /* Watch Dog Time On */
++      {0xfc,0x00},
++      {0x00,0xAA},    /* For EDS Check */
++      {0x21,0x03},    /* peter */
++      {0xfc,0x01},
++      {0x04,0x01},    /* ARM Clock Divider */
++
++      {0xfc,0x02},
++      {0x30,0x90},    /* Analog offset */
++      {0x37,0x0d},    /* Global Gain */
++      {0x2d,0x48},    /* Double Shutter */
++      {0x60,0x00},    /* Blank_Adrs */
++
++      {0x45,0x1e},    /* 0e -  CDS Timing for Average Sub_Sampling */
++      {0x47,0x2f},
++      {0x02,0x0e},    /* ADC Resolution */
++      {0x3d,0x06},    /* Frame ADLC */
++      {0x4d,0x08},    /* Doubler Volatage */
++      {0x54,0x02},    /* Double Shutter */
++      {0x55,0x1e},    /* Line ADLC */
++      {0x56,0x30},
++      {0x59,0x00},    /* LineADLC offset */
++      {0x5b,0x08},    /* R_Ref_Ctrl */
++      {0x44,0x63},    /* CLP_EN */
++      {0x4A,0x10},    /* Clamp Control */
++      {0x42,0x02},
++      {0x43,0xef},
++
++      /*
++       * Table Set for Sub-Sampling
++       */
++
++      {0xfc,0x03},
++      {0x2c,0x00},    /* crcb_sel for Sub-Sampling Table */
++      {0x05,0x46},    /* Output Image Size Set for Capture */
++      {0x07,0xb6},
++      {0x0e,0x04},
++      {0x12,0x03},
++
++      {0xfc,0x04},
++      {0x32,0x04},
++      {0x33,0xbc},
++
++      {0xfc,0x04},
++      {0xc5,0x26},    /* Output Image Size Set for Preview */
++      {0xc7,0x5e},
++      {0xce,0x04},
++      {0xd2,0x04},
++
++      {0xec,0x06},    /* CrCb sel = YCBYCR(0x06) by jsgood */
++      {0xc0,0x06},
++      {0xc1,0x70},
++      {0xc2,0x02},
++      {0xc3,0x87},
++
++      {0xfc,0x07},
++      {0x05,0x00},
++      {0x06,0x00},
++      {0x07,0x8b},
++      {0x08,0xf5},
++      {0x09,0x00},
++      {0x0a,0xb4},
++      {0x0b,0x00},
++      {0x0c,0xea},
++      {0x0d,0x00},
++      {0x0e,0x40},
++
++      {0xfc,0x00},
++      {0x70,0x02},
++
++      /* Jeongyun added still shot cbcr_sel */
++      {0xfc,0x03},
++      {0x2c,0x00},
++      {0x5c,0x00},
++      {0x8c,0x00},
++      {0xbc,0x00},
++      {0xfc,0x04},
++      {0x5c,0x00},
++
++      /*
++       * COMMAND SET
++       */
++
++      {0xfc,0x00},
++      {0x73,0x21},    /* Frame AE Enable peter */
++      {0x20,0x02},    /* Change AWB Mode */
++
++      {0xfc,0x00},
++      {0x6c,0xb0},    /* AE target */
++      {0x6d,0x00},
++
++      {0xfc,0x20},
++      {0x16,0x5a},    /* for Prevating AE Hunting */
++
++      {0xfc,0x00},
++      {0x78,0x6a},    /* AGC Max */
++      {0xfc,0x20},
++      {0x16,0x60},    /* Frame AE Start */
++
++      {0xfc,0x20},
++      {0x57,0x18},    /* Stable_Frame_AE */
++      {0x2C,0x30},    /* For Forbidden Area */
++      {0x2E,0x00},    /* For Forbidden Area */
++      {0x14,0x70},
++      {0x01,0x00},    /* Stepless_Off */
++
++      {0xfc,0x07},
++      {0x11,0x02},    /* AWB G Gain offset */
++
++      {0xfc,0x07},
++      {0x3e,0x0a},    /* AWB Cut R max */
++
++      {0xfc,0x01},
++      {0xc8,0xd0},    /* AWB Y Max */
++      {0xfc,0x00},
++      {0x3e,0x20},    /* 30 - AWB Y_min */
++      {0x3d,0x10},    /* AWB Y_min Low */
++      {0xfc,0x22},
++      {0x8c,0x04},    /* AWB Min Y Weight AWB */
++      {0x8d,0x16},    /* AWB Max Y Weight */
++
++      {0xfc,0x00},
++      {0x32,0x04},    /* AWB moving average 8 frame */
++      {0x81,0x10},    /* AWB G gain suppress Disable */
++      {0xbc,0xf0},
++
++      {0x29,0x04},    /* Y level H */
++      {0x2a,0x00},    /* Y level L */
++      {0x2b,0x03},    /* color level H */
++      {0x2c,0xc8},    /* color level L */
++
++      {0xfc,0x07},
++      {0x37,0x00},    /* Flicker Add for 32 MHz */
++      {0xfc,0x00},
++      {0x72,0xa0},    /* Flicker for 32 MHz */
++      {0x74,0x08},    /* flicker 60 Hz Fix */
++
++      {0xfc,0x20},
++      {0x02,0x02},    /* Flicker Dgain Mode */
++
++      {0xfc,0x00},
++      //{0x23,0x40},  /* Mirror Option */
++      {0x62,0x0a},    /* Mirror Option */
++
++      {0xfc,0x02},
++      {0x4e,0x1b},    /* Enable SDA and SCL pull-up; drive 8 mA */
++      {0x4f,0xf0},    /* PCLK and YC: 8 mA, AF and ZM (AZ): 2 mA */
++
++      {0xfc,0x01},
++      {0x0c,0x03},    /* Full YC Enable */
++      //{0x0c,03},    /* Full YC Enable */
++      //{0x02,02},    /* crcb_sel */
++      //{0x02,02},    /* crcb_sel  peter */
++      //{0x01,01},    /* pclk      peter */
++      //{0x01,01},
++
++      /*
++       * COLOR MATRIX
++       */
++
++      {0xfc,0x01},    /* color matrix */
++      {0x51,0x0A},
++      {0x52,0x42},
++      {0x53,0xF9},
++      {0x54,0x80},
++      {0x55,0x00},
++      {0x56,0x3D},
++
++      {0x57,0xFE},
++      {0x58,0x0B},
++      {0x59,0x06},
++      {0x5A,0x9C},
++      {0x5B,0xFF},
++      {0x5C,0x59},
++
++      {0x5D,0xFF},
++      {0x5E,0xD8},
++      {0x5F,0xFC},
++      {0x60,0x2E},
++      {0x61,0x07},
++      {0x62,0xFA},
++
++      /*
++       * EDGE ENHANCEMENT
++       */
++
++      {0xfc,0x00},
++      {0x89,0x03},    /* Edge Suppress On */
++      {0xfc,0x0b},
++      {0x42,0x50},    /* Edge AGC MIN */
++      {0x43,0x60},    /* Edge AGC MAX */
++      {0x45,0x18},    /* positive gain AGC MIN */
++      {0x49,0x0a},    /* positive gain AGC MAX */
++      {0x4d,0x18},    /* negative gain AGC MIN */
++      {0x51,0x0a},    /* negative gain AGC MAX */
++
++      {0xfc,0x05},
++      {0x34,0x20},    /* APTCLP */
++      {0x35,0x09},    /* APTSC */
++      {0x36,0x0b},    /* ENHANCE */
++      {0x3f,0x00},    /* NON-LIN */
++      {0x42,0x10},    /* EGFALL */
++      {0x43,0x00},    /* HLFALL */
++      {0x45,0xa0},    /* EGREF */
++      {0x46,0x7a},    /* HLREF */
++      {0x47,0x40},    /* LLREF */
++      {0x48,0x0c},
++      {0x49,0x31},    /* CSSEL  EGSEL  CS_DLY */
++
++      {0x40,0x41},    /* Y delay */
++
++      /*
++       * GAMMA
++       */
++
++      {0xfc,0x01},
++
++      {0x6F,0x0A},    /* R */
++      {0x70,0x1A},
++      {0x71,0x7A},
++      {0x72,0xF8},
++      {0x73,0x00},
++
++      {0x74,0xA0},
++      {0x75,0x18},
++      {0x76,0x65},
++      {0x77,0xAD},
++      {0x78,0x6A},
++
++      {0x79,0xE2},
++      {0x7A,0x12},
++      {0x7B,0x3D},
++      {0x7C,0x5A},
++      {0x7D,0xBF},
++
++      {0x7E,0x72},
++      {0x7F,0x88},
++      {0x80,0x9D},
++      {0x81,0xB0},
++      {0x82,0xFF},
++
++      {0x83,0xC0},
++      {0x84,0xCF},
++      {0x85,0xDA},
++      {0x86,0xFC},
++
++      {0x87,0x08},    /* G */
++      {0x88,0x12},
++      {0x89,0x42},
++      {0x8A,0xBA},
++      {0x8B,0x00},
++
++      {0x8C,0x75},
++      {0x8D,0xED},
++      {0x8E,0x42},
++      {0x8F,0x80},
++      {0x90,0x5A},
++
++      {0x91,0xB5},
++      {0x92,0xE5},
++      {0x93,0x10},
++      {0x94,0x35},
++      {0x95,0xAF},
++
++      {0x96,0x55},
++      {0x97,0x70},
++      {0x98,0x88},
++      {0x99,0x9D},
++      {0x9A,0xFF},
++
++      {0x9B,0xB1},
++      {0x9C,0xC4},
++      {0x9D,0xD5},
++      {0x9E,0xFC},
++
++      {0x9F,0x05},    /* B */
++      {0xA0,0x18},
++      {0xA1,0x42},
++      {0xA2,0xd7},
++      {0xA3,0x00},
++
++      {0xA4,0xB6},
++      {0xA5,0x3b},
++      {0xA6,0x88},
++      {0xA7,0xC8},
++      {0xA8,0x6A},
++
++      {0xA9,0x00},
++      {0xAA,0x30},
++      {0xAB,0x58},
++      {0xAC,0x78},
++      {0xAD,0xFF},
++
++      {0xAE,0x90},
++      {0xAF,0xA5},
++      {0xB0,0xB6},
++      {0xB1,0xC5},
++      {0xB2,0xFF},
++
++      {0xB3,0xD0},
++      {0xB4,0xD6},
++      {0xB5,0xDA},
++      {0xB6,0xFC},
++
++      /*
++       * HUE CONTROL
++       */
++
++      {0xfc,0x00},
++      {0x48,0x34},    /* 2000K */
++      {0x49,0x34},
++      {0x4a,0xf4},
++      {0x4b,0x00},
++      {0x4c,0x44},
++      {0x4d,0x3c},
++      {0x4e,0xf0},
++      {0x4f,0x0c},
++
++      {0x50,0x34},    /* 3000K */
++      {0x51,0x34},
++      {0x52,0xf4},
++      {0x53,0x00},
++      {0x54,0x44},
++      {0x55,0x3c},
++      {0x56,0xf0},
++      {0x57,0x0c},
++
++      {0x58,0x34},    /* 5100K */
++      {0x59,0x30},
++      {0x5a,0x00},
++      {0x5b,0x04},
++      {0x5c,0x40},
++      {0x5d,0x2c},
++      {0x5e,0xfc},
++      {0x5f,0x04},
++
++      /*
++       * UPPRE0x0x FUNCTION
++       */
++
++      {0xfc,0x00},
++      {0x7e,0xf4},
++
++      /*
++       * BPR
++       */
++
++      {0xfc,0x01},
++      {0x3d,0x10},
++
++      {0xfc,0x0b},
++      {0x0b,0x00},    /* ISP BPR On start */
++      {0x0c,0x20},    /* Th13 AGC Min */
++      {0x0d,0x40},    /* Th13 AGC Max */
++      {0x0e,0x00},    /* Th1 Max H for AGCMIN */
++      {0x0f,0x20},    /* Th1 Max L for AGCMIN */
++      {0x10,0x00},    /* Th1 Min H for AGCMAX */
++      {0x11,0x10},    /* Th1 Min L for AGCMAX */
++      {0x12,0x00},    /* Th3 Max H for AGCMIN */
++      {0x13,0x00},    /* Th3 Max L for AGCMIN */
++      {0x14,0xff},    /* Th3 Min H for AGCMAX */
++      {0x15,0xff},    /* Th3 Min L for AGCMAX */
++      {0x16,0x20},    /* Th57 AGC Min */
++      {0x17,0x40},    /* Th57 AGC Max */
++      {0x18,0x00},    /* Th5 Max H for AGCMIN */
++      {0x19,0x00},    /* Th5 Max L for AGCMIN */
++      {0x1a,0x00},    /* Th5 Min H for AGCMAX */
++      {0x1b,0x20},    /* Th5 Min L for AGCMAX */
++      {0x1c,0x00},    /* Th7 Max H for AGCMIN */
++      {0x1d,0x00},    /* Th7 Max L for AGCMIN */
++      {0x1e,0x00},    /* Th7 Min H for AGCMAX */
++      {0x1f,0x20},    /* Th7 Min L for AGCMAX */
++
++      /*
++       * GR/GB CORRECTION
++       */
++
++      {0xfc,0x01},
++      {0x45,0x0c},
++
++      {0xfc,0x0b},
++      {0x21,0x00},    /* start AGC */
++      {0x22,0x18},    /* AGCMIN */
++      {0x23,0x58},    /* AGCMAX */
++      {0x24,0x0d},    /* G Th AGCMIN */
++      {0x25,0x30},    /* G Th AGCMAX */
++      {0x26,0x0d},    /* RB Th AGCMIN */
++      {0x27,0x30},    /* RB Th AGCMAX */
++
++      /*
++       * NR
++       */
++
++      {0xfc,0x01},
++      {0x4C,0x01},    /* NR Enable */
++      {0x49,0x15},    /* Sig_Th Mult */
++      {0x4B,0x0A},    /* Pre_Th Mult */
++
++      {0xfc,0x0b},
++      {0x28,0x00},    /* NR start AGC */
++      {0x29,0x00},    /* SIG Th AGCMIN H */
++      {0x2a,0x14},    /* SIG Th AGCMIN L */
++      {0x2b,0x00},    /* SIG Th AGCMAX H */
++      {0x2c,0x14},    /* SIG Th AGCMAX L */
++      {0x2d,0x00},    /* PRE Th AGCMIN H */
++      {0x2e,0x90},    /* PRE Th AGCMIN L */
++      {0x2f,0x01},    /* PRE Th AGCMAX H */
++      {0x30,0x00},    /* PRE Th AGCMAX L */
++      {0x31,0x00},    /* POST Th AGCMIN H */
++      {0x32,0xa0},    /* POST Th AGCMIN L */
++      {0x33,0x01},    /* POST Th AGCMAX H */
++      {0x34,0x10},    /* POST Th AGCMAX L */
++
++      /*
++       * 1D-Y/C-SIGMA-LPF
++       */
++
++      {0xfc,0x01},
++      {0x05,0xc0},
++
++      {0xfc,0x0b},
++      {0x35,0x00},    /* YLPF start AGC */
++      {0x36,0x40},    /* YLPF01 AGCMIN */
++      {0x37,0x60},    /* YLPF01 AGCMAX */
++      {0x38,0x00},    /* YLPF SIG01 Th AGCMINH */
++      {0x39,0x18},    /* YLPF SIG01 Th AGCMINL */
++      {0x3a,0x00},    /* YLPF SIG01 Th AGCMAXH */
++      {0x3b,0x40},    /* YLPF SIG01 Th AGCMAXH */
++      {0x3c,0x50},    /* YLPF02 AGCMIN */
++      {0x3d,0x60},    /* YLPF02 AGCMAX */
++      {0x3e,0x00},    /* YLPF SIG02 Th AGCMINH */
++      {0x3f,0x30},    /* YLPF SIG02 Th AGCMINL */
++      {0x40,0x00},    /* YLPF SIG02 Th AGCMAXH */
++      {0x41,0x40},    /* YLPF SIG02 Th AGCMAXH */
++      {0xd4,0x40},    /* CLPF AGCMIN */
++      {0xd5,0x60},    /* CLPF AGCMAX */
++      {0xd6,0xb0},    /* CLPF SIG01 Th AGCMIN */
++      {0xd7,0xf0},    /* CLPF SIG01 Th AGCMAX */
++      {0xd8,0xb0},    /* CLPF SIG02 Th AGCMIN */
++      {0xd9,0xf0},    /* CLPF SIG02 Th AGCMAX */
++
++      /*
++       * COLOR SUPPRESS
++       */
++
++      {0xfc,0x0b},
++      {0x08,0x58},    /* Color suppress AGC MIN */
++      {0x09,0x03},    /* Color suppress MIN H */
++      {0x0a,0x80},    /* Color suppress MIN L */
++
++      /*
++       * SHADING
++       */
++
++      {0xfc,0x09},
++       //Shading file for 3BAFX
++      //s90000// shading off
++      // DSP9_SH_WIDTH_H
++      {0x01,0x06},
++      {0x02,0x40},
++      // DSP9_SH_HEIGHT_H
++      {0x03,0x04},
++      {0x04,0xB0},
++      // DSP9_SH_XCH_R
++      {0x05,0x03},
++      {0x06,0x1A},
++      {0x07,0x02},
++      {0x08,0x4E},
++      // DSP9_SH_XCH_G
++      {0x09,0x03},
++      {0x0A,0x27},
++      {0x0B,0x02},
++      {0x0C,0x11},
++      // DSP9_SH_XCH_B
++      {0x0D,0x03},
++      {0x0E,0x15},
++      {0x0F,0x01},
++      {0x10,0xE3},
++      // DSP9_SH_Del_eH_R
++      {0x1D,0x85},
++      {0x1E,0x55},
++      {0x1F,0x77},
++      {0x20,0x9E},
++      {0x23,0x7F},
++      {0x24,0xE6},
++      {0x21,0x7F},
++      {0x22,0xE6},
++      // DSP9_SH_Del_eH_G
++      {0x25,0x82},
++      {0x26,0x9A},
++      {0x27,0x78},
++      {0x28,0xC0},
++      {0x2B,0x76},
++      {0x2C,0x07},
++      {0x29,0x86},
++      {0x2A,0x09},
++      // DSP9_SH_Del_eH_B
++      {0x2D,0x85},
++      {0x2E,0x55},
++      {0x2F,0x75},
++      {0x30,0x6D},
++      {0x33,0x74},
++      {0x34,0xA2},
++      {0x31,0x84},
++      {0x32,0xA2},
++      // DSP9_SH_VAL_R0H
++      {0x35,0x01},
++      {0x36,0x01},
++      {0x37,0x01},
++      {0x38,0x14},
++      {0x39,0x01},
++      {0x3A,0x45},
++      {0x3B,0x01},
++      {0x3C,0x8A},
++      {0x3D,0x01},
++      {0x3E,0xA3},
++      {0x3F,0x01},
++      {0x40,0xB9},
++      {0x41,0x01},
++      {0x42,0xD9},
++      {0x43,0x01},
++      {0x44,0xF6},
++      // DSP9_SH_VAL_G0H
++      {0x45,0x01},
++      {0x46,0x00},
++      {0x47,0x01},
++      {0x48,0x0E},
++      {0x49,0x01},
++      {0x4A,0x34},
++      {0x4B,0x01},
++      {0x4C,0x68},
++      {0x4D,0x01},
++      {0x4E,0x76},
++      {0x4F,0x01},
++      {0x50,0x94},
++      {0x51,0x01},
++      {0x52,0xAB},
++      {0x53,0x01},
++      {0x54,0xC3},
++      // DSP9_SH_VAL_B0H
++      {0x55,0x01},
++      {0x56,0x00},
++      {0x57,0x01},
++      {0x58,0x0C},
++      {0x59,0x01},
++      {0x5A,0x2B},
++      {0x5B,0x01},
++      {0x5C,0x5D},
++      {0x5D,0x01},
++      {0x5E,0x70},
++      {0x5F,0x01},
++      {0x60,0x8A},
++      {0x61,0x01},
++      {0x62,0xA1},
++      {0x63,0x01},
++      {0x64,0xB3},
++      // DSP9_SH_M_R2_R1H
++      {0x65,0x00},
++      {0x66,0x98},
++      {0x67,0x2C},
++      {0x68,0x02},
++      {0x69,0x60},
++      {0x6A,0xB0},
++      {0x6B,0x05},
++      {0x6C,0x59},
++      {0x6D,0x8C},
++      {0x6E,0x07},
++      {0x6F,0x48},
++      {0x70,0x1B},
++      {0x71,0x09},
++      {0x72,0x82},
++      {0x73,0xC0},
++      {0x74,0x0C},
++      {0x75,0x09},
++      {0x76,0x7B},
++      {0x77,0x0E},
++      {0x78,0xDC},
++      {0x79,0x4D},
++      // DSP9_SH_M_R2_G1H
++      {0x7A,0x00},
++      {0x7B,0xAD},
++      {0x7C,0x76},
++      {0x7D,0x02},
++      {0x7E,0xB5},
++      {0x7F,0xD7},
++      {0x80,0x06},
++      {0x81,0x19},
++      {0x82,0x23},
++      {0x83,0x08},
++      {0x84,0x4C},
++      {0x85,0xE2},
++      {0x86,0x0A},
++      {0x87,0xD7},
++      {0x88,0x5C},
++      {0x89,0x0D},
++      {0x8A,0xB8},
++      {0x8B,0x90},
++      {0x8C,0x10},
++      {0x8D,0xF0},
++      {0x8E,0x7F},
++      // DSP9_SH_M_R2_B1H
++      {0x8F,0x00},
++      {0x90,0xC1},
++      {0x91,0xD0},
++      {0x92,0x03},
++      {0x93,0x07},
++      {0x94,0x3F},
++      {0x95,0x06},
++      {0x96,0xD0},
++      {0x97,0x4F},
++      {0x98,0x09},
++      {0x99,0x46},
++      {0x9A,0x32},
++      {0x9B,0x0C},
++      {0x9C,0x1C},
++      {0x9D,0xFE},
++      {0x9E,0x0F},
++      {0x9F,0x54},
++      {0xA0,0xB1},
++      {0xA1,0x12},
++      {0xA2,0xED},
++      {0xA3,0x4C},
++      // DSP9_SH_SUB_RR0H
++      {0xA4,0x6B},
++      {0xA5,0xAA},
++      {0xA6,0x23},
++      {0xA7,0xE3},
++      {0xA8,0x15},
++      {0xA9,0x88},
++      {0xAA,0x21},
++      {0xAB,0x20},
++      {0xAC,0x1C},
++      {0xAD,0xB6},
++      {0xAE,0x19},
++      {0xAF,0x55},
++      {0xB0,0x16},
++      {0xB1,0xAA},
++      // DSP9_SH_SUB_RG0H
++      {0xB2,0x5E},
++      {0xB3,0x74},
++      {0xB4,0x1F},
++      {0xB5,0x7C},
++      {0xB6,0x12},
++      {0xB7,0xE4},
++      {0xB8,0x1D},
++      {0xB9,0x10},
++      {0xBA,0x19},
++      {0xBB,0x30},
++      {0xBC,0x16},
++      {0xBD,0x39},
++      {0xBE,0x13},
++      {0xBF,0xE2},
++      // DSP9_SH_SUB_RB0H
++      {0xC0,0x54},
++      {0xC1,0x89},
++      {0xC2,0x1C},
++      {0xC3,0x2D},
++      {0xC4,0x10},
++      {0xC5,0xE8},
++      {0xC6,0x1A},
++      {0xC7,0x02},
++      {0xC8,0x16},
++      {0xC9,0x8A},
++      {0xCA,0x13},
++      {0xCB,0xE4},
++      {0xCC,0x11},
++      {0xCD,0xCC},
++
++      {0x00,0x02},  // Shading on
++
++      //==========================================================
++      //      X-SHADING
++      //==========================================================
++      {0xfc,0x1B},
++      {0x80,0x01},
++      {0x81,0x00},
++      {0x82,0x4C},
++      {0x83,0x00},
++      {0x84,0x86},
++      {0x85,0x03},
++      {0x86,0x5E},
++      {0x87,0x00},
++      {0x88,0x07},
++      {0x89,0xA4},
++      {0x90,0x00},
++      {0x91,0x12},
++      {0x92,0x00},
++      {0x93,0x12},
++      {0x94,0x00},
++      {0x95,0x12},
++      {0x96,0x00},
++      {0x97,0x12},
++      {0x98,0x00},
++      {0x99,0x12},
++      {0x9A,0x00},
++      {0x9B,0x12},
++      {0x9C,0x00},
++      {0x9D,0x12},
++      {0x9E,0x00},
++      {0x9F,0x12},
++      {0xA0,0x00},
++      {0xA1,0x12},
++      {0xA2,0x00},
++      {0xA3,0x12},
++      {0xA4,0x00},
++      {0xA5,0x12},
++      {0xA6,0x00},
++      {0xA7,0x12},
++      {0xA8,0x00},
++      {0xA9,0x12},
++      {0xAA,0x00},
++      {0xAB,0x12},
++      {0xAC,0x00},
++      {0xAD,0x12},
++      {0xAE,0x00},
++      {0xAF,0x12},
++      {0xB0,0x00},
++      {0xB1,0x12},
++      {0xB2,0x00},
++      {0xB3,0x12},
++      {0xB4,0x00},
++      {0xB5,0x12},
++      {0xB6,0x00},
++      {0xB7,0x15},
++      {0xB8,0x00},
++      {0xB9,0x12},
++      {0xBA,0x00},
++      {0xBB,0x12},
++      {0xBC,0x00},
++      {0xBD,0x12},
++      {0xBE,0x00},
++      {0xBF,0x12},
++      {0xC0,0x00},
++      {0xC1,0x12},
++      {0xC2,0x00},
++      {0xC3,0x12},
++      {0xC4,0x00},
++      {0xC5,0x12},
++      {0xC6,0x00},
++      {0xC7,0x12},
++      {0xC8,0x00},
++      {0xC9,0x12},
++      {0xCA,0x00},
++      {0xCB,0x12},
++      {0xCC,0x00},
++      {0xCD,0x12},
++      {0xCE,0x00},
++      {0xCF,0x12},
++      {0xD0,0x00},
++      {0xD1,0x12},
++      {0xD2,0x00},
++      {0xD3,0x12},
++      {0xD4,0x00},
++      {0xD5,0x12},
++               // x-shading temp. correlation factor
++      {0xfc,0x0b},
++      {0xda,0x00},    // t0(3100K)
++      {0xdb,0xac},
++      {0xdc,0x01},    // tc(5100K)
++      {0xdd,0x30},    // default eeh
++
++      {0xfc,0x00},
++      {0x81,0x10},    // xshading tem
++
++      {0xfc,0x1b},
++      {0x80,0x01},    // X-Shading On
++
++      //==========================================================
++      //      AE WINDOW WEIGHT
++      //==========================================================
++      {0xfc,0x00},
++      {0x03,0x4b},    // AE Suppress On
++
++      {0xfc,0x06},
++      {0x01,0x35},    // UXGA AE Window
++      {0x03,0xc2},
++      {0x05,0x48},
++      {0x07,0xb8},
++      {0x31,0x2a},    // Subsampling AE Window
++      {0x33,0x61},
++      {0x35,0x28},
++      {0x37,0x5c},
++      {0x39,0x28},
++      {0x3B,0x5A},
++      {0x3D,0x10},    // 1c
++      {0x3F,0x44},
++
++      {0xfc,0x20},
++      {0x60,0x11},
++      {0x61,0x11},
++      {0x62,0x11},
++      {0x63,0x11},
++      {0x64,0x11},
++      {0x65,0x22},
++      {0x66,0x22},
++      {0x67,0x11},
++      {0x68,0x11},
++      {0x69,0x33},
++      {0x6a,0x33},
++      {0x6b,0x11},
++      {0x6c,0x12},
++      {0x6d,0x55},
++      {0x6e,0x55},
++      {0x6f,0x21},
++      {0x70,0x13},
++      {0x71,0x55},
++      {0x72,0x55},
++      {0x73,0x31},
++      {0x74,0x33},
++      {0x75,0x33},
++      {0x76,0x33},
++      {0x77,0x33},
++
++      //==========================================================
++      //      SAIT AWB
++      //==========================================================
++      //=================================
++      // White Point
++      //=================================
++      {0xfc,0x22},    // White Point (For Hue Control & MWB)
++      {0x01,0xD0},    // D65
++      {0x03,0x9B},
++      {0x05,0xC0},    // 5000K
++      {0x07,0xB8},
++      {0x09,0xA7},    // CWF
++      {0x0b,0xDC},
++      {0x0d,0x98},    // 3000K
++      {0x0f,0xE0},
++      {0x11,0x85},    // A
++      {0x12,0x00},
++      {0x13,0xF6},
++      {0x15,0x80},    // 2000K
++      {0x16,0x01},
++      {0x17,0x00},
++
++      //=================================
++      // Basic Setting
++      //=================================
++      {0xfc,0x22},
++      {0xA0,0x01},
++      {0xA1,0x3F},
++      {0xA2,0x0E},
++      {0xA3,0x65},
++      {0xA4,0x07},
++      {0xA5,0xF4},
++      {0xA6,0x11},
++      {0xA7,0xC8},
++      {0xA9,0x02},
++      {0xAA,0x43},
++      {0xAB,0x26},
++      {0xAC,0x1F},
++      {0xAD,0x02},
++      {0xAE,0x2C},
++      {0xAF,0x19},
++      {0xB0,0x0F},
++
++      {0x94,0x3C},
++      {0x95,0xCC},
++      {0x96,0x5C},
++      {0x97,0x4D},
++      {0xD0,0xA8},
++      {0xD1,0x29},
++      {0xD2,0x39},
++      {0xD3,0x22},
++      {0xD4,0x30},
++      {0xDB,0x29},
++      {0xDC,0x7E},
++      {0xDD,0x22},
++
++      {0xE7,0x00},
++      {0xE8,0xca},
++      {0xE9,0x00},
++      {0xEA,0x62},
++      {0xEB,0x00},
++      {0xEC,0x00},
++      {0xEE,0x97},
++
++      //=================================
++      // Pixel Filter Setting
++      //=================================
++      {0xFC,0x07},
++      {0x95,0x8F},
++
++      {0xfc,0x01},
++      {0xD3,0x4B},
++      {0xD4,0x00},
++      {0xD5,0x38},
++      {0xD6,0x00},
++      {0xD7,0x60},
++      {0xD8,0x00},
++      {0xD9,0x4E},
++      {0xDA,0x00},
++      {0xDB,0x27},
++      {0xDC,0x15},
++      {0xDD,0x23},
++      {0xDE,0xAD},
++      {0xDF,0x24},
++      {0xE0,0x01},
++      {0xE1,0x17},
++      {0xE2,0x4A},
++      {0xE3,0x36},
++      {0xE4,0x40},
++      {0xE5,0x40},
++      {0xE6,0x40},
++      {0xE7,0x40},
++      {0xE8,0x30},
++      {0xE9,0x3D},
++      {0xEA,0x17},
++      {0xEB,0x01},
++
++      //=================================
++      // Polygon AWB Region Tune
++      //=================================
++      {0xfc,0x22},
++      {0x18,0x00},    // 1
++      {0x19,0x5a},
++      {0x1a,0xf8},
++      {0x1b,0x00},    // 2
++      {0x1c,0x59},
++      {0x1d,0xCC},
++      {0x1e,0x00},    // 3
++      {0x1f,0x74},
++      {0x20,0xB3},
++      {0x21,0x00},    // 4
++      {0x22,0x86},
++      {0x23,0xA2},
++      {0x24,0x00},    // 5
++      {0x25,0x94},
++      {0x26,0x89},
++      {0x27,0x00},    // 6
++      {0x28,0xA6},
++      {0x29,0x76},
++      {0x2A,0x00},    // 7
++      {0x2B,0xd0},
++      {0x2C,0x5e},
++      {0x2D,0x00},    // 8
++      {0x2E,0xfa},
++      {0x2F,0x47},
++      {0x30,0x00},    // 9
++      {0x31,0xfD},
++      {0x32,0x5D},
++      {0x33,0x00},    // 10
++      {0x34,0xBB},
++      {0x35,0x7c},
++      {0x36,0x00},    // 11
++      {0x37,0xAD},
++      {0x38,0x88},
++      {0x39,0x00},    // 12
++      {0x3A,0x9A},
++      {0x3B,0xA3},
++      {0x3C,0x00},    // 13
++      {0x3D,0x7C},
++      {0x3E,0xDD},
++      {0x3F,0x00},    // 14
++      {0x40,0x00},
++      {0x41,0x00},
++
++      //=================================
++      // Moving Equation Weight
++      //=================================
++      {0xfc,0x22},
++      {0x98,0x07},
++
++      //=================================
++      // EIT Threshold
++      //=================================
++      {0xfc,0x22},
++      {0xb1,0x00},    // {0xunny
++      {0xb2,0x03},
++      {0xb3,0x00},
++      {0xb4,0xc1},
++
++      {0xb5,0x00},    // Cloudy
++      {0xb6,0x05},
++      {0xb7,0xc9},
++      {0xb9,0x81},
++
++      {0xd7,0x00},    // Shade
++      {0xd8,0x35},
++      {0xd9,0x20},
++      {0xda,0x81},
++
++      //=================================
++      // Gain Offset
++      //=================================
++      {0xfc,0x00},
++      {0x79,0xF9},
++      {0x7A,0x02},    // Global AWB gain off{0xet
++
++      {0xfc,0x22},
++      {0x58,0xf6},    // D65 R Off{0xet
++      {0x59,0xff},    // D65 B Off{0xet
++      {0x5A,0xfa},    // 5000K R Off{0xet
++      {0x5B,0xFe},    // 5000K B Off{0xet
++      {0x5C,0xfb},    // CWF R Off{0xet
++      {0x5D,0xFe},    // CWF B Off{0xet
++      {0x5E,0xfb},    // 3000K R Off{0xet
++      {0x5F,0xFb},    // 3000K B Off{0xet
++      {0x60,0xfb},    // A R Off0xet
++      {0x61,0xfb},    // A B Off0xet
++      {0x62,0xfb},    // 2000K R Off0xet
++      {0x63,0xfb},    // 2000K B Off0xet
++
++      {0xde,0x00},    // LARGE OBJECT BUG FIX
++      {0xf0,0x6a},    // RB Ratio
++      //=================================
++      // Green Stablity Enhance
++      //=================================
++      {0xfc,0x22},
++      {0xb9,0x00},
++      {0xba,0x00},
++      {0xbb,0x00},
++      {0xbc,0x00},
++      {0xe5,0x01},
++      {0xe6,0xff},
++
++      {0xbd,0x90},
++
++      //==========================================================
++      //      Special Effect
++      //==========================================================
++      {0xfc,0x07},    // Special Effect
++      {0x30,0xc0},
++      {0x31,0x20},
++      {0x32,0x40},
++      {0x33,0xc0},
++      {0x34,0x00},
++      {0x35,0xb0},
++
++      {0xfc,0x00},
++      {0x73,0x21},    // Frame AE Enable, peter
++
++      {0xfc,0x04},
++      {0xc0,0x06},
++      {0xc1,0x70},
++      {0xFF,0xFF}     // REGISTER END
++};
++#else
++s5k4xa_t s5k4ba_reg[] =
++{
++//==========================================================
++//    CAMERA INITIAL (Analog & Clock Setting)
++//==========================================================
++      {0xfc, 0x07},
++      {0x66, 0x01},// WDT
++      {0xfc, 0x00},
++      {0x00, 0xaa},// For EDS Check
++      {0x21, 0x03},// peter0223 added
++
++      {0xfc, 0x01},
++      {0x04, 0x01},// ARM Clock Divider
++
++      {0xfc, 0x02},// Analog setting
++      {0x55, 0x1e},// LineADLC on(s551a), off(s550a)
++      {0x56, 0x10},// BPR 16code
++      {0x30, 0x82},// Analog offset (capture =?h)
++      {0x37, 0x25},// Global Gain (default:31)
++
++      {0x57, 0x80},// // LineADLC Roffset
++      {0x58, 0x80},//89       //90  // LineADLC Goffset
++      {0x59, 0x80},//90  // LineADLC offset don't care
++
++      {0x44, 0x64},//clamp en[6]=1 on
++      {0x4a, 0x30},//clamp level 0011h [7]~[4]
++
++      {0x2d, 0x48},// double shutter (default:00)
++      {0x4d, 0x08},// Voltage doubler (default:04)
++      {0x4e, 0x00},// IO current 8mA set
++      {0x4f, 0x8a},// IO current 48mA set
++
++      {0x66, 0x41},// 1st comp current 2uA
++      {0x43, 0xef},// ec_comp
++      {0x62, 0x60},// LD control , CFPN_EN off
++
++//==========================================================
++//    Table Set for Sub-Sampling
++//==========================================================
++      {0xfc, 0x03},
++      {0x01, 0x60},
++      //{0x2e, 0x00},
++      {0x2e, 0x03},//DHL
++      {0x05, 0x46},// Output Image Size Set for Capture
++      {0x07, 0xb6},
++      {0x0e, 0x04},
++      {0x12, 0x03},
++
++      {0xfc, 0x04},
++      {0xc5, 0x26},// Output Image Size Set for Preview
++      {0xc7, 0x5e},
++      {0xce, 0x04},
++      {0xd2, 0x04},
++      //{0xee, 0x00},//DHL
++      {0xee, 0x01},
++      {0xc0, 0x06},
++      {0xc1, 0x60},//frame_H
++      {0xc2, 0x02},
++      {0xc3, 0x8d},//frame_V
++
++      {0xfc, 0x07},
++      {0x05, 0x00},
++      {0x06, 0x00},
++      {0x07, 0x8b},
++      {0x08, 0xf5},
++      {0x09, 0x00},
++      {0x0a, 0xb4},
++      {0x0b, 0x00},
++      {0x0c, 0xea},
++      {0x0d, 0x00},
++      {0x0e, 0x40},
++
++#if 1
++//==========================================================
++//    COMMAND SET
++//==========================================================
++      {0xfc, 0x00},
++      {0x70, 0x02},
++
++      {0xfc, 0x00},
++      {0x73, 0x11},//21 Frmae AE Enable, peter0223
++      {0x20, 0x02},// Change AWB Mode
++
++      {0xfc, 0x00},
++      {0x78, 0x6a},// AGC Max
++
++      {0xfc, 0x00},
++      {0x6c, 0xa0},// AE target
++      {0x6d, 0x00},
++
++      {0xfc, 0x20},
++      {0x16, 0x5a},// AGC frame AE start _for Prevating AE Hunting
++      {0x57, 0x18},// Stable_Frame_AE
++
++      {0xfc, 0x00},
++      {0x83, 0x06},//low condition shutter off // Double shutter off
++
++      {0xfc, 0x0b},
++      {0x5c, 0x69},//70       //AGC value to start shutter on/off suppress
++      {0x5d, 0x65},//60   //AGC value to start double shutter on/off suppress
++
++      {0xfc, 0x20},
++      {0x25, 0x00},// CINTR Min
++      {0x2a, 0x01},// forbidden
++      {0x2b, 0x02},// For Forbidden Area
++      {0x2c, 0x0a},
++      {0x2d, 0x00},// For Forbidden Area
++      {0x2e, 0x00},
++      {0x2f, 0x05},// forbidden
++      {0x14, 0x78},//70
++      {0x01, 0x00},// Stepless_Off
++
++      {0xfc, 0x00},
++      {0x29, 0x04},// Y level
++      {0x2a, 0x00},
++      {0x2b, 0x03},// C level
++      {0x2c, 0x80},//60
++
++      {0xfc, 0x07},
++      {0x37, 0x00},// Flicker
++
++      {0xfc, 0x00},
++      {0x72, 0xa0},// Flicker for 32MHz
++      {0x74, 0x08},// flicker 60Hz fix
++      {0xfc, 0x20},
++      {0x02, 0x12},//02 Flicker Dgain Mode
++      {0xfc, 0x00},
++      {0x62, 0x02},// Hue Control Enable
++
++      {0xfc, 0x01},
++      //{0x0c, 0x02},// Full YC Enable
++      {0x0C, 0x03},//Donghoon
++
++
++//==========================================================
++//    COLOR MATRIX
++//==========================================================
++      {0xfc, 0x01},   //DL gain 60
++      {0x51, 0x08},   //06    //08  07
++      {0x52, 0xe8},   //df    //9B  E7
++      {0x53, 0xfc},   //fd    //FC  FB
++      {0x54, 0x33},   //09    //07  B9
++      {0x55, 0xfe},   //00    //FF  00
++      {0x56, 0xe6},   //17    //5E  5F
++      {0x57, 0xfe},   //fe    //FD  FD
++      {0x58, 0x3d},   //4f    //0E  46
++      {0x59, 0x08},   //06    //07  05
++      {0x5a, 0x21},   //9b    //EE  E6
++      {0x5b, 0xfd},   //ff    //FF  00
++      {0x5c, 0xa3},   //17    //05  D3
++      {0x5d, 0xff},   //ff    //FF  FF
++      {0x5e, 0xbc},   //81    //7A  53
++      {0x5f, 0xfc},   //fd    //FC  FB
++      {0x60, 0x96},   //5b    //23  B1
++      {0x61, 0x07},   //07    //08  08
++      {0x62, 0xaf},   //24    //64  FD
++
++//==========================================================
++//    EDGE ENHANCEMENT
++//==========================================================
++      {0xfc, 0x05},
++      {0x12, 0x3d},
++      {0x13, 0x3b},
++      {0x14, 0x38},
++      {0x15, 0x3b},
++      {0x16, 0x3d},
++
++      {0x17, 0x3b},
++      {0x18, 0x05},
++      {0x19, 0x09},
++      {0x1a, 0x05},
++      {0x1b, 0x3b},
++
++      {0x1c, 0x38},
++      {0x1d, 0x09},
++      {0x1e, 0x1c},
++      {0x1f, 0x09},
++      {0x20, 0x38},
++
++      {0x21, 0x3b},
++      {0x22, 0x05},
++      {0x23, 0x09},
++      {0x24, 0x05},
++      {0x25, 0x3b},
++
++      {0x26, 0x3d},
++      {0x27, 0x3b},
++      {0x28, 0x38},
++      {0x29, 0x3b},
++      {0x2a, 0x3d},
++
++      {0xfc, 0x00},
++      {0x89, 0x00},// Edge Suppress On
++      {0xfc, 0x0b},
++      {0x42, 0x50},// Edge AGC MIN
++      {0x43, 0x60},// Edge AGC MAX
++      {0x45, 0x18},// positive gain AGC MIN
++      {0x49, 0x06},// positive gain AGC MAX
++      {0x4d, 0x18},// negative gain AGC MIN
++      {0x51, 0x06},// negative gain AGC MAX
++
++      {0xfc, 0x05},
++      {0x34, 0x28},// APTCLP
++      {0x35, 0x03},// APTSC
++      {0x36, 0x0b},// ENHANCE
++      {0x3f, 0x00},// NON-LIN
++      {0x42, 0x10},// EGFALL
++      {0x43, 0x00},// HLFALL
++      {0x45, 0xa0},// EGREF
++      {0x46, 0x7a},// HLREF
++      {0x47, 0x40},// LLREF
++      {0x48, 0x0c},
++      {0x49, 0x31},// CSSEL  EGSEL  CS_DLY
++
++      {0x40, 0x41},// Y delay
++
++      // New Wide Luma Edge
++      {0xfc, 0x1d},
++      {0x86, 0x00},
++      {0x87, 0x60},
++      {0x88, 0x01},
++      {0x89, 0x20},
++      {0x8a, 0x00},
++      {0x8b, 0x00},
++      {0x8c, 0x00},
++      {0x8d, 0x00},
++      {0x8e, 0x00},
++      {0x8f, 0x20},
++      {0x90, 0x00},
++      {0x91, 0x00},
++      {0x92, 0x00},
++      {0x93, 0x0a},
++      {0x94, 0x00},
++      {0x95, 0x00},
++      {0x96, 0x00},
++      {0x97, 0x20},
++      {0x98, 0x00},
++      {0x99, 0x00},
++      {0x9a, 0xff},
++      {0x9b, 0xea},
++      {0x9c, 0xaa},
++      {0x9d, 0xab},
++      {0x9e, 0xff},
++      {0x9f, 0xf1},
++      {0xa0, 0x55},
++      {0xa1, 0x56},
++      {0xa2, 0x07},
++
++      {0x85, 0x01},
++
++/*
++ * GAMMA
++ */
++
++      {0xfc, 0x1d},
++      {0x00, 0x0b},
++      {0x01, 0x18},
++      {0x02, 0x3d},
++      {0x03, 0x9c},
++      {0x04, 0x00},
++      {0x05, 0x0c},
++      {0x06, 0x76},
++      {0x07, 0xc2},
++      {0x08, 0x00},
++      {0x09, 0x56},
++      {0x0a, 0x34},
++      {0x0b, 0x60},
++      {0x0c, 0x85},
++      {0x0d, 0xa7},
++      {0x0e, 0xaa},
++      {0x0f, 0xc6},
++      {0x10, 0xe2},
++      {0x11, 0xfc},
++      {0x12, 0x13},
++      {0x13, 0xab},
++      {0x14, 0x29},
++      {0x15, 0x3c},
++      {0x16, 0x4b},
++      {0x17, 0x5a},
++      {0x18, 0xff},
++      {0x19, 0x69},
++      {0x1a, 0x78},
++      {0x1b, 0x84},
++      {0x1c, 0x91},
++      {0x1d, 0xff},
++      {0x1e, 0x9c},
++      {0x1f, 0xa7},
++      {0x20, 0xb2},
++      {0x21, 0xbd},
++      {0x22, 0xff},
++      {0x23, 0xc7},
++      {0x24, 0xd2},
++      {0x25, 0xdb},
++      {0x26, 0xe4},
++      {0x27, 0xff},
++      {0x28, 0xec},
++      {0x29, 0xf5},
++      {0x2a, 0xf0},
++      {0x2b, 0x0b},
++      {0x2c, 0x18},
++      {0x2d, 0x3d},
++      {0x2e, 0x9c},
++      {0x2f, 0x00},
++      {0x30, 0x0c},
++      {0x31, 0x76},
++      {0x32, 0xc2},
++      {0x33, 0x00},
++      {0x34, 0x56},
++      {0x35, 0x34},
++      {0x36, 0x60},
++      {0x37, 0x85},
++      {0x38, 0xa7},
++      {0x39, 0xaa},
++      {0x3a, 0xc6},
++      {0x3b, 0xe2},
++      {0x3c, 0xfc},
++      {0x3d, 0x13},
++      {0x3e, 0xab},
++      {0x3f, 0x29},
++      {0x40, 0x3c},
++      {0x41, 0x4b},
++      {0x42, 0x5a},
++      {0x43, 0xff},
++      {0x44, 0x69},
++      {0x45, 0x78},
++      {0x46, 0x84},
++      {0x47, 0x91},
++      {0x48, 0xff},
++      {0x49, 0x9c},
++      {0x4a, 0xa7},
++      {0x4b, 0xb2},
++      {0x4c, 0xbd},
++      {0x4d, 0xff},
++      {0x4e, 0xc7},
++      {0x4f, 0xd2},
++      {0x50, 0xdb},
++      {0x51, 0xe4},
++      {0x52, 0xff},
++      {0x53, 0xec},
++      {0x54, 0xf5},
++      {0x55, 0xf0},
++      {0x56, 0x0b},
++      {0x57, 0x18},
++      {0x58, 0x3d},
++      {0x59, 0x9c},
++      {0x5a, 0x00},
++      {0x5b, 0x0c},
++      {0x5c, 0x76},
++      {0x5d, 0xc2},
++      {0x5e, 0x00},
++      {0x5f, 0x56},
++      {0x60, 0x34},
++      {0x61, 0x60},
++      {0x62, 0x85},
++      {0x63, 0xa7},
++      {0x64, 0xaa},
++      {0x65, 0xc6},
++      {0x66, 0xe2},
++      {0x67, 0xfc},
++      {0x68, 0x13},
++      {0x69, 0xab},
++      {0x6a, 0x29},
++      {0x6b, 0x3c},
++      {0x6c, 0x4b},
++      {0x6d, 0x5a},
++      {0x6e, 0xff},
++      {0x6f, 0x69},
++      {0x70, 0x78},
++      {0x71, 0x84},
++      {0x72, 0x91},
++      {0x73, 0xff},
++      {0x74, 0x9c},
++      {0x75, 0xa7},
++      {0x76, 0xb2},
++      {0x77, 0xbd},
++      {0x78, 0xff},
++      {0x79, 0xc7},
++      {0x7a, 0xd2},
++      {0x7b, 0xdb},
++      {0x7c, 0xe4},
++      {0x7d, 0xff},
++      {0x7e, 0xec},
++      {0x7f, 0xf5},
++      {0x80, 0xf0},
++
++/*
++ * HUE CONTROL
++ */
++
++      {0xfc, 0x00},
++      {0x48, 0x40},           /* 2000K */
++      {0x49, 0x30},
++      {0x4a, 0x00},
++      {0x4b, 0x00},
++      {0x4c, 0x30},
++      {0x4d, 0x38},
++      {0x4e, 0x00},
++      {0x4f, 0x00},
++
++      {0x50, 0x40},           /* 3000K */
++      {0x51, 0x30},
++      {0x52, 0x00},
++      {0x53, 0x00},
++      {0x54, 0x30},
++      {0x55, 0x38},
++      {0x56, 0x00},
++      {0x57, 0x00},
++
++      {0x58, 0x3c},           /* 40 - 5100K */
++      {0x59, 0x30},           /* 4a, 40 */
++      {0x5a, 0x00},           /* 0c, 00 */
++      {0x5b, 0x00},           /* 00 */
++      {0x5c, 0x30},           /* 4a */
++      {0x5d, 0x38},           /* 40 */
++      {0x5e, 0x00},           /* f6, 15 */
++      {0x5f, 0xfc},           /* 00 */
++
++/*
++ * SUPPRESS FUNCTION
++ */
++
++      {0xfc, 0x00},
++      {0x7e, 0xf4},
++
++/*
++ * BPR
++ */
++
++      {0xfc, 0x0b},
++      {0x3d, 0x10},
++
++      {0xfc, 0x0b},
++      {0x0b, 0x00},
++      {0x0c, 0x40},
++      {0x0d, 0x5a},
++      {0x0e, 0x00},
++      {0x0f, 0x20},
++      {0x10, 0x00},
++      {0x11, 0x10},
++      {0x12, 0x00},
++      {0x13, 0x7f},
++      {0x14, 0x03},
++      {0x15, 0xff},
++      {0x16, 0x48},
++      {0x17, 0x60},
++      {0x18, 0x00},
++      {0x19, 0x00},
++      {0x1a, 0x00},
++      {0x1b, 0x20},
++      {0x1c, 0x00},
++      {0x1d, 0x00},
++      {0x1e, 0x00},
++      {0x1f, 0x20},
++
++/*
++ * GR/GB CORRECTION
++ */
++
++      {0xfc, 0x01},
++      {0x45, 0x0c},
++      {0xfc, 0x0b},
++      {0x21, 0x00},
++      {0x22, 0x40},
++      {0x23, 0x60},
++      {0x24, 0x0d},
++      {0x25, 0x20},
++      {0x26, 0x0d},
++      {0x27, 0x20},
++
++/*
++ * NR
++ */
++
++      {0xfc, 0x01},
++      {0x4c, 0x01},
++      {0x49, 0x15},
++      {0x4b, 0x0a},
++
++      {0xfc, 0x0b},
++      {0x28, 0x00},
++      {0x29, 0x00},
++      {0x2a, 0x14},
++      {0x2b, 0x00},
++      {0x2c, 0x14},
++      {0x2d, 0x00},
++      {0x2e, 0xD0},
++      {0x2f, 0x02},
++      {0x30, 0x00},
++      {0x31, 0x00},
++      {0x32, 0xa0},
++      {0x33, 0x00},
++      {0x34, 0xe0},
++
++/*
++ * 1D-Y/C-SIGMA-LPF
++ */
++
++      {0xfc, 0x01},
++      {0x05, 0xC0},
++
++      {0xfc, 0x0b},
++      {0x35, 0x00},
++      {0x36, 0x40},
++      {0x37, 0x60},
++      {0x38, 0x00},
++      {0x39, 0x18},
++      {0x3a, 0x00},
++      {0x3b, 0x40},
++      {0x3c, 0x50},
++      {0x3d, 0x60},
++      {0x3e, 0x00},
++      {0x3f, 0x30},
++      {0x40, 0x00},
++      {0x41, 0x40},
++      {0xd4, 0x40},
++      {0xd5, 0x60},
++      {0xd6, 0xb0},
++      {0xd7, 0xf0},
++      {0xd8, 0xb0},
++      {0xd9, 0xf0},
++
++/*
++ * COLOR SUPPRESS
++ */
++
++      {0xfc, 0x0b},
++      {0x08, 0x58},
++      {0x09, 0x03},
++      {0x0a, 0x00},
++
++/*
++ * SHADING
++ */
++
++      {0xfc, 0x09},
++
++      {0x01, 0x06},
++      {0x02, 0x40},
++
++      {0x03, 0x04},
++      {0x04, 0xB0},
++
++      {0x05, 0x03},
++      {0x06, 0x20},
++      {0x07, 0x02},
++      {0x08, 0x91},
++
++      {0x09, 0x03},
++      {0x0A, 0x25},
++      {0x0B, 0x02},
++      {0x0C, 0x64},
++
++      {0x0D, 0x03},
++      {0x0E, 0x0F},
++      {0x0F, 0x02},
++      {0x10, 0x4E},
++
++      {0x1D, 0x80},
++      {0x1E, 0x00},
++      {0x1F, 0x80},
++      {0x20, 0x00},
++      {0x23, 0x85},
++      {0x24, 0x52},
++      {0x21, 0x79},
++      {0x22, 0xE6},
++
++      {0x25, 0x80},
++      {0x26, 0x00},
++      {0x27, 0x80},
++      {0x28, 0x00},
++      {0x2B, 0x81},
++      {0x2C, 0x48},
++      {0x29, 0x81},
++      {0x2A, 0x48},
++
++      {0x2D, 0x80},
++      {0x2E, 0x00},
++      {0x2F, 0x80},
++      {0x30, 0x00},
++      {0x33, 0x7C},
++      {0x34, 0x45},
++      {0x31, 0x7D},
++      {0x32, 0x7D},
++
++      {0x35, 0x01},
++      {0x36, 0x00},
++      {0x37, 0x01},
++      {0x38, 0x11},
++      {0x39, 0x01},
++      {0x3A, 0x4E},
++      {0x3B, 0x01},
++      {0x3C, 0xAB},
++      {0x3D, 0x01},
++      {0x3E, 0xDC},
++      {0x3F, 0x02},
++      {0x40, 0x1A},
++      {0x41, 0x02},
++      {0x42, 0x6A},
++      {0x43, 0x02},
++      {0x44, 0xD3},
++
++      {0x45, 0x01},
++      {0x46, 0x00},
++      {0x47, 0x01},
++      {0x48, 0x0E},
++      {0x49, 0x01},
++      {0x4A, 0x40},
++      {0x4B, 0x01},
++      {0x4C, 0x8A},
++      {0x4D, 0x01},
++      {0x4E, 0xB5},
++      {0x4F, 0x01},
++      {0x50, 0xE8},
++      {0x51, 0x02},
++      {0x52, 0x27},
++      {0x53, 0x02},
++      {0x54, 0x84},
++
++      {0x55, 0x01},
++      {0x56, 0x00},
++      {0x57, 0x01},
++      {0x58, 0x0C},
++      {0x59, 0x01},
++      {0x5A, 0x37},
++      {0x5B, 0x01},
++      {0x5C, 0x74},
++      {0x5D, 0x01},
++      {0x5E, 0x96},
++      {0x5F, 0x01},
++      {0x60, 0xC9},
++      {0x61, 0x02},
++      {0x62, 0x04},
++      {0x63, 0x02},
++      {0x64, 0x4B},
++
++      {0x65, 0x00},
++      {0x66, 0x9A},
++      {0x67, 0x2D},
++      {0x68, 0x02},
++      {0x69, 0x68},
++      {0x6A, 0xB6},
++      {0x6B, 0x05},
++      {0x6C, 0x6B},
++      {0x6D, 0x99},
++      {0x6E, 0x07},
++      {0x6F, 0x60},
++      {0x70, 0xAD},
++      {0x71, 0x09},
++      {0x72, 0xA2},
++      {0x73, 0xD7},
++      {0x74, 0x0C},
++      {0x75, 0x32},
++      {0x76, 0x19},
++      {0x77, 0x0F},
++      {0x78, 0x0E},
++      {0x79, 0x70},
++
++      {0x7A, 0x00},
++      {0x7B, 0x9C},
++      {0x7C, 0x9F},
++      {0x7D, 0x02},
++      {0x7E, 0x72},
++      {0x7F, 0x7A},
++      {0x80, 0x05},
++      {0x81, 0x81},
++      {0x82, 0x94},
++      {0x83, 0x07},
++      {0x84, 0x7E},
++      {0x85, 0x97},
++      {0x86, 0x09},
++      {0x87, 0xC9},
++      {0x88, 0xEA},
++      {0x89, 0x0C},
++      {0x8A, 0x63},
++      {0x8B, 0x8C},
++      {0x8C, 0x0F},
++      {0x8D, 0x4B},
++      {0x8E, 0x7E},
++
++      {0x8F, 0x00},
++      {0x90, 0x9E},
++      {0x91, 0xBD},
++      {0x92, 0x02},
++      {0x93, 0x7A},
++      {0x94, 0xF5},
++      {0x95, 0x05},
++      {0x96, 0x94},
++      {0x97, 0xA8},
++      {0x98, 0x07},
++      {0x99, 0x98},
++      {0x9A, 0x8F},
++      {0x9B, 0x09},
++      {0x9C, 0xEB},
++      {0x9D, 0xD5},
++      {0x9E, 0x0C},
++      {0x9F, 0x8E},
++      {0xA0, 0x7A},
++      {0xA1, 0x0F},
++      {0xA2, 0x80},
++      {0xA3, 0x7D},
++
++      {0xA4, 0x6A},
++      {0xA5, 0x44},
++      {0xA6, 0x23},
++      {0xA7, 0x6C},
++      {0xA8, 0x15},
++      {0xA9, 0x40},
++      {0xAA, 0x20},
++      {0xAB, 0xB2},
++      {0xAC, 0x1C},
++      {0xAD, 0x56},
++      {0xAE, 0x19},
++      {0xAF, 0x01},
++      {0xB0, 0x16},
++      {0xB1, 0x5F},
++
++      {0xB2, 0x68},
++      {0xB3, 0x9C},
++      {0xB4, 0x22},
++      {0xB5, 0xDE},
++      {0xB6, 0x14},
++      {0xB7, 0xEC},
++      {0xB8, 0x20},
++      {0xB9, 0x30},
++      {0xBA, 0x1B},
++      {0xBB, 0xE5},
++      {0xBC, 0x18},
++      {0xBD, 0x9D},
++      {0xBE, 0x16},
++      {0xBF, 0x05},
++
++      {0xC0, 0x67},
++      {0xC1, 0x36},
++      {0xC2, 0x22},
++      {0xC3, 0x67},
++      {0xC4, 0x14},
++      {0xC5, 0xA4},
++      {0xC6, 0x1F},
++      {0xC7, 0xC2},
++      {0xC8, 0x1B},
++      {0xC9, 0x86},
++      {0xCA, 0x18},
++      {0xCB, 0x49},
++      {0xCC, 0x15},
++      {0xCD, 0xBA},
++
++      {0x00, 0x02},   /* shading on */
++
++/*
++ * X-SHADING
++ */
++
++      {0xfc, 0x1B},
++      {0x80, 0x01},
++      {0x81, 0x00},
++      {0x82, 0x4C},
++      {0x83, 0x00},
++      {0x84, 0x86},
++      {0x85, 0x03},
++      {0x86, 0x5E},
++      {0x87, 0x00},
++      {0x88, 0x07},
++      {0x89, 0xA4},
++      {0x90, 0x00},
++      {0x91, 0x88},
++      {0x92, 0x00},
++      {0x93, 0xC1},
++      {0x94, 0x00},
++      {0x95, 0xF7},
++      {0x96, 0x01},
++      {0x97, 0x21},
++      {0x98, 0x01},
++      {0x99, 0x37},
++      {0x9A, 0x01},
++      {0x9B, 0x0C},
++      {0x9C, 0x00},
++      {0x9D, 0xCE},
++      {0x9E, 0x00},
++      {0x9F, 0x3B},
++      {0xA0, 0x00},
++      {0xA1, 0x5B},
++      {0xA2, 0x00},
++      {0xA3, 0x7A},
++      {0xA4, 0x00},
++      {0xA5, 0x92},
++      {0xA6, 0x00},
++      {0xA7, 0x91},
++      {0xA8, 0x00},
++      {0xA9, 0x81},
++      {0xAA, 0x00},
++      {0xAB, 0x60},
++      {0xAC, 0x07},
++      {0xAD, 0xCB},
++      {0xAE, 0x07},
++      {0xAF, 0xC5},
++      {0xB0, 0x07},
++      {0xB1, 0xBB},
++      {0xB2, 0x07},
++      {0xB3, 0xAA},
++      {0xB4, 0x07},
++      {0xB5, 0xA9},
++      {0xB6, 0x07},
++      {0xB7, 0xB2},
++      {0xB8, 0x07},
++      {0xB9, 0xBF},
++      {0xBA, 0x07},
++      {0xBB, 0x5E},
++      {0xBC, 0x07},
++      {0xBD, 0x3C},
++      {0xBE, 0x06},
++      {0xBF, 0xF9},
++      {0xC0, 0x06},
++      {0xC1, 0xBD},
++      {0xC2, 0x06},
++      {0xC3, 0xB8},
++      {0xC4, 0x06},
++      {0xC5, 0xE2},
++      {0xC6, 0x07},
++      {0xC7, 0x1A},
++      {0xC8, 0x07},
++      {0xC9, 0x15},
++      {0xCA, 0x06},
++      {0xCB, 0xDE},
++      {0xCC, 0x06},
++      {0xCD, 0x9C},
++      {0xCE, 0x06},
++      {0xCF, 0x6F},
++      {0xD0, 0x06},
++      {0xD1, 0x5E},
++      {0xD2, 0x06},
++      {0xD3, 0x84},
++      {0xD4, 0x06},
++      {0xD5, 0xCA},
++
++      {0xfc, 0x0b},
++      {0xda, 0x00},
++      {0xdb, 0x9c},
++      {0xdc, 0x00},
++      {0xdd, 0xd1},
++
++      {0xfc, 0x1b},
++      {0x80, 0x01},
++
++/*
++ * AE WINDOW WEIGHT
++ */
++
++      {0xfc, 0x00},
++      {0x03, 0x4b},
++      {0xfc, 0x06},
++      {0x01, 0x35},
++      {0x03, 0xc2},
++      {0x05, 0x48},
++      {0x07, 0xb8},
++      {0x31, 0x2a},
++      {0x33, 0x61},
++      {0x35, 0x28},
++      {0x37, 0x5c},
++
++      {0xfc, 0x20},
++      {0x60, 0x11},
++      {0x61, 0x11},
++      {0x62, 0x11},
++      {0x63, 0x11},
++      {0x64, 0x11},
++      {0x65, 0x22},
++      {0x66, 0x22},
++      {0x67, 0x11},
++      {0x68, 0x11},
++      {0x69, 0x33},
++      {0x6a, 0x33},
++      {0x6b, 0x11},
++      {0x6c, 0x12},
++      {0x6d, 0x55},
++      {0x6e, 0x55},
++      {0x6f, 0x21},
++      {0x70, 0x13},
++      {0x71, 0x55},
++      {0x72, 0x55},
++      {0x73, 0x31},
++      {0x74, 0x33},
++      {0x75, 0x33},
++      {0x76, 0x33},
++      {0x77, 0x33},
++
++/*
++ * SAIT AWB
++ */
++
++      {0xfc, 0x00},
++      {0x7b, 0x00},
++
++      {0xfc, 0x07},
++      {0x3c, 0x10},
++      {0x3d, 0x10},
++      {0x3e, 0x10},
++      {0x3f, 0x10},
++
++      {0xfc, 0x01},
++      {0xc8, 0xe0},
++      {0xfc, 0x00},
++      {0x3e, 0x10},
++
++      {0xfc, 0x00},
++      {0x3e, 0x10},
++      {0x3d, 0x04},
++      {0x32, 0x02},
++      {0x81, 0x10},
++      {0xbc, 0xf0},
++      {0xfc, 0x22},
++      {0x8c, 0x04},
++      {0x8d, 0x06},
++
++      {0xfc, 0x07},
++      {0x97, 0x00},
++
++/*
++ * White Point
++ */
++
++      {0xfc, 0x22},
++      {0x01, 0xD8},
++      {0x03, 0xA1},
++      {0x05, 0xCA},
++      {0x07, 0xC8},
++      {0x09, 0xB3},
++      {0x0b, 0xE2},
++      {0x0d, 0xA0},
++      {0x0f, 0xF0},
++      {0x11, 0x94},
++      {0x12, 0x00},
++      {0x13, 0xFD},
++      {0x15, 0x88},
++      {0x16, 0x01},
++      {0x17, 0x10},
++
++/*
++ * Basic Setting
++ */
++
++      {0xfc, 0x22},
++      {0xA8, 0xFF},
++
++      {0xA0, 0x01},
++      {0xA1, 0x38},
++      {0xA2, 0x0E},
++      {0xA3, 0x6D},
++      {0xA4, 0x07},
++      {0xA5, 0xF5},
++      {0xA6, 0x11},
++      {0xA7, 0xBE},
++      {0xA9, 0x02},
++      {0xAA, 0xD2},
++      {0xAB, 0x00},
++      {0xAC, 0x00},
++      {0xAD, 0x02},
++      {0xAE, 0x3F},
++      {0xAF, 0x19},
++      {0xB0, 0x91},
++      {0x94, 0x3D},
++      {0x95, 0x00},
++      {0x96, 0x58},
++      {0x97, 0x80},
++      {0xD0, 0xA2},
++      {0xD1, 0x2E},
++      {0xD2, 0x4D},
++      {0xD3, 0x28},
++      {0xD4, 0x90},
++      {0xDB, 0x2E},
++      {0xDC, 0x7A},
++      {0xDD, 0x28},
++      {0xE7, 0x00},
++      {0xE8, 0xc7},
++      {0xE9, 0x00},
++      {0xEA, 0x62},
++      {0xEB, 0xD2},
++      {0xEC, 0xD9},
++      {0xEE, 0xA6},
++
++      {0xfc, 0x00},
++      {0x8a, 0x02},
++
++/*
++ * Pixel Filter Setting
++ */
++
++      {0xFC, 0x07},
++      {0x95, 0xCF},
++
++      {0xfc, 0x01},
++      {0xd3, 0x4f},
++      {0xd4, 0x00},
++      {0xd5, 0x3c},
++      {0xd6, 0x80},
++      {0xd7, 0x61},
++      {0xd8, 0x00},
++      {0xd9, 0x49},
++      {0xda, 0x00},
++      {0xdb, 0x24},
++      {0xdc, 0x4b},
++      {0xdd, 0x23},
++      {0xde, 0xf2},
++      {0xdf, 0x20},
++      {0xe0, 0x73},
++      {0xe1, 0x18},
++      {0xe2, 0x69},
++      {0xe3, 0x31},
++      {0xe4, 0x40},
++      {0xe5, 0x34},
++      {0xe6, 0x40},
++      {0xe7, 0x40},
++      {0xe8, 0x32},
++      {0xe9, 0x40},
++      {0xea, 0x1c},
++      {0xeb, 0x00},
++
++/*
++ * Polygon AWB Region Tune
++ */
++
++      /* AWB3 - Polygon Region */
++      {0xfc, 0x22},
++      {0x18, 0x00},
++      {0x19, 0x4b},
++      {0x1a, 0xfd},
++      {0x1b, 0x00},
++      {0x1c, 0x41},
++      {0x1d, 0xd9},
++      {0x1e, 0x00},
++      {0x1f, 0x66},
++      {0x20, 0xa9},
++      {0x21, 0x00},
++      {0x22, 0x8b},
++      {0x23, 0x82},
++      {0x24, 0x00},
++      {0x25, 0xa4},
++      {0x26, 0x6c},
++      {0x27, 0x00},
++      {0x28, 0xbd},
++      {0x29, 0x5d},
++      {0x2a, 0x00},
++      {0x2b, 0xdc},
++      {0x2c, 0x4d},
++      {0x2d, 0x00},
++      {0x2e, 0xdc},
++      {0x2f, 0x63},
++      {0x30, 0x00},
++      {0x31, 0xc1},
++      {0x32, 0x72},
++      {0x33, 0x00},
++      {0x34, 0xab},
++      {0x35, 0x84},
++      {0x36, 0x00},
++      {0x37, 0x99},
++      {0x38, 0xa0},
++      {0x39, 0x00},
++      {0x3a, 0x81},
++      {0x3b, 0xe9},
++      {0x3c, 0x00},
++      {0x3d, 0x00},
++      {0x3e, 0x00},
++      {0x3f, 0x00},
++      {0x40, 0x00},
++      {0x41, 0x00},
++
++/*
++ * Moving Equation Weight
++ */
++
++      {0xfc, 0x22},
++      {0x98, 0x07},
++
++/*
++ * EIT Threshold
++ */
++
++      {0xfc, 0x22},
++      {0xb1, 0x00},
++      {0xb2, 0x02},
++      {0xb3, 0x00},
++      {0xb4, 0xC1},
++
++      {0xb5, 0x00},
++      {0xb6, 0x02},
++      {0xb7, 0x00},
++      {0xb9, 0xc2},
++
++      {0xd7, 0x00},
++      {0xd8, 0x35},
++      {0xd9, 0x20},
++      {0xda, 0x81},
++
++/*
++ * Gain Offset
++ */
++
++      {0xfc, 0x00},
++      {0x79, 0xf8},
++      {0x7a, 0x08},
++
++      {0xfc, 0x07},
++      {0x11, 0x01},
++
++      {0xfc, 0x22},
++      {0x58, 0xf8},
++      {0x59, 0x00},
++      {0x5A, 0xfc},
++      {0x5B, 0x00},
++      {0x5C, 0x00},
++      {0x5D, 0x00},
++      {0x5E, 0x00},
++      {0x5F, 0x00},
++      {0x60, 0x00},
++      {0x61, 0xf8},
++      {0x62, 0x00},
++      {0x63, 0xf0},
++
++      {0xde, 0x00},
++      {0xf0, 0x6a},
++
++/*
++ * Green Stablity Enhance
++ */
++
++      {0xfc, 0x22},
++      {0xb9, 0x00},
++      {0xba, 0x00},
++      {0xbb, 0x00},
++      {0xbc, 0x00},
++      {0xe5, 0x01},
++      {0xe6, 0xff},
++      {0xbd, 0x8c},
++
++/*
++ * Special Effect
++ */
++
++      {0xfc, 0x07},
++      {0x30, 0xc0},
++      {0x31, 0x20},
++      {0x32, 0x40},
++      {0x33, 0xc0},
++      {0x34, 0x00},
++      {0x35, 0xb0},
++#endif
++
++/*
++ * ETC
++ */
++
++      {0xfc, 0x01},
++      {0x01, 0x01},
++      {0x00, 0x90},
++      {0xfc, 0x02},
++      {0x03, 0x20},
++
++      {0xfc, 0x20},
++      {0x0f, 0x00},
++
++      {0xfc, 0x00},
++      {0x02, 0x09},
++
++      {0xfc, 0x01},
++      //{0x02, 0x00},
++      {0x02, 0x02},//Donghoon
++};
++#endif
++#else
++#error No samsung CIS moudule !
++#endif
++
++
++/* For VGA ( 640 x 480) on 4BA module */
++
++s5k4xa_t s5k4ba_reg_vga[] =
++{
++      // To do.
++};
++
++/* For SVGA ( 800 x 600) on 4BA module */
++
++s5k4xa_t s5k4ba_reg_svga[] =
++{
++      {0xfc,0x02},
++      {0x2d,0x48},
++      {0x44,0x63},
++
++      {0xfc,0x03},
++      {0x02,0x04},
++      {0xfc,0x20},
++      {0x14,0x70},
++
++      {0xfc,0x00},
++      {0x03,0x4b},            /* AE/AWB On */
++      {0x7e,0xf4},            /* Suppress On */
++      {0x89,0x03},            /* Edge Suppress On */
++
++      {0xfc,0x02},
++      {0x02,0x0e},            /* sensor BPRoff */
++
++      {0xfc,0x20},
++      {0x16,0x60},            /* Frame AE Start */
++
++      {0xfc,0x02},
++      {0x30,0x90},            /* Analog offset */
++      {0x37,0x0d},            /* Global Gain */
++      {0x60,0x00},            /* Blank_Adrs */
++      {0x45,0x0e},            /* CDS Timing for Average Sub_Sampling */
++      {0x47,0x2f},
++
++      {0xfc,0x01},
++      {0x9F,0x05},            /* B */
++      {0xA0,0x18},
++      {0xA1,0x42},
++      {0xA2,0xd7},
++      {0xA3,0x00},
++
++      {0xA4,0xB6},
++      {0xA5,0x3b},
++      {0xA6,0x88},
++      {0xA7,0xC8},
++      {0xA8,0x6A},
++
++      {0xfc,0x05},
++      {0x34,0x20},            /* APTCLP */
++      {0x35,0x08},            /* 9 - APTSC */
++
++      {0xfc,0x00},            /* flash 0821 */
++      {0x32,0x04},            /* AWB moving average 8 frame */
++
++      {0xfc,0x01},
++      {0x01,0x01},            /* Pclk inversion */
++
++      {0xfc,0x00},
++      {0x02,0x09},            /* 800 x 600 */
++
++
++      {0xFF,0xFF} /* REGISTER END */
++};
++
++/* For SXGA (1280 x 1024 = 1.3M) on 4BA module */
++
++s5k4xa_t s5k4ba_reg_sxga[] =
++{
++      // To do.
++};
++
++
++/* For UXGA (1600 x 1200 = 2M) on 4BA module */
++
++s5k4xa_t s5k4ba_reg_uxga[] =
++{
++      // To do.
++};
++
++
++/* For SQVGA on 4BA module */
++
++s5k4xa_t s5k4ba_reg_qsvga[] =
++{
++      /* Pclk inversion */
++      {0xfc,0x01},
++      {0x01,0x01},
++
++      /* To setting CbCr selection on Table 14h */
++      {0xfc, 0x14},
++      {0x5c, 0x00},
++
++      /* To load table_11 H4V4 */
++      {0xfc, 0x00},
++      {0x02, 0x0B}
++};
++
++#define S5K4BA_INIT_REGS      ARRAY_SIZE(s5k4ba_reg)
++#define S5K4BA_UXGA_REGS      ARRAY_SIZE(s5k4ba_reg_uxga)
++#define S5K4BA_SVGA_REGS      ARRAY_SIZE(s5k4ba_reg_svga)
++#define S5K4BA_VGA_REGS               ARRAY_SIZE(s5k4ba_reg_vga)
++#define S5K4BA_QSVGA_REGS     ARRAY_SIZE(s5k4ba_reg_qsvga)
++
++
++#define S5K4BA_RISC_REGS 0xEB
++#define S5K4BA_ISP_REGS 0xFB /* S5C7323X */
++#define S5K4BA_CIS_REGS 0x2F /* S5K437LA03 */
++
++
++#define S5K4BA_REGS (0x1000)
++
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/samsung/Makefile linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/media/video/samsung/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/samsung/Makefile      2009-05-10 22:27:59.000000000 +0200
+@@ -0,0 +1,4 @@
++#
++# Samsung CIS camera module
++#
++obj-$(CONFIG_VIDEO_SAMSUNG_S5K4BA) += 4xa_sensor.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/media/video/videodev2_s3c.h linux-2.6.29-rc3.owrt.om/drivers/media/video/videodev2_s3c.h
+--- linux-2.6.29-rc3.owrt/drivers/media/video/videodev2_s3c.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/media/video/videodev2_s3c.h       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,210 @@
++#ifndef __VIDEODEV2_S3C_H_
++#define __VIDEODEV2_S3C_H_
++
++#include <linux/videodev2.h>
++
++#define V4L2_INPUT_TYPE_MSDMA         3
++#define V4L2_INPUT_TYPE_INTERLACE     4
++
++/****************************************************************
++* struct v4l2_control
++* Control IDs defined by S3C
++*****************************************************************/
++/* Image Effect */
++#define V4L2_CID_ORIGINAL             (V4L2_CID_PRIVATE_BASE + 0)
++#define V4L2_CID_ARBITRARY            (V4L2_CID_PRIVATE_BASE + 1)
++#define V4L2_CID_NEGATIVE             (V4L2_CID_PRIVATE_BASE + 2)
++#define V4L2_CID_ART_FREEZE           (V4L2_CID_PRIVATE_BASE + 3)
++#define V4L2_CID_EMBOSSING            (V4L2_CID_PRIVATE_BASE + 4)
++#define V4L2_CID_SILHOUETTE           (V4L2_CID_PRIVATE_BASE + 5)
++
++/* Image Rotate */
++#define V4L2_CID_ROTATE_90            (V4L2_CID_PRIVATE_BASE + 6)
++#define V4L2_CID_ROTATE_180           (V4L2_CID_PRIVATE_BASE + 7)
++#define V4L2_CID_ROTATE_270           (V4L2_CID_PRIVATE_BASE + 8)
++#define V4L2_CID_ROTATE_BYPASS                (V4L2_CID_PRIVATE_BASE + 9)
++
++/* Zoom-in, Zoom-out */
++#define       V4L2_CID_ZOOMIN                 (V4L2_CID_PRIVATE_BASE + 10)
++#define V4L2_CID_ZOOMOUT              (V4L2_CID_PRIVATE_BASE + 11)
++
++/****************************************************************
++*     I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
++*      It's only for S3C
++*****************************************************************/
++#define VIDIOC_S_CAMERA_START                 _IO  ('V', BASE_VIDIOC_PRIVATE + 0)
++#define VIDIOC_S_CAMERA_STOP          _IO  ('V', BASE_VIDIOC_PRIVATE + 1)
++#define VIDIOC_MSDMA_START            _IOW ('V', BASE_VIDIOC_PRIVATE + 2, struct v4l2_msdma_format)
++#define VIDIOC_MSDMA_STOP             _IOW ('V', BASE_VIDIOC_PRIVATE + 3, struct v4l2_msdma_format)
++#define VIDIOC_S_MSDMA                        _IOW ('V', BASE_VIDIOC_PRIVATE + 4, struct v4l2_msdma_format)
++#define VIDIOC_S_INTERLACE_MODE       _IOW ('V', BASE_VIDIOC_PRIVATE + 5, struct v4l2_interlace_format)
++
++/*
++ *    INTERLACE MODE
++ */
++#define       S3C_VIDEO_DECODER_PAL           1       /* can decode PAL signal */
++#define       S3C_VIDEO_DECODER_NTSC          2       /* can decode NTSC */
++#define       S3C_VIDEO_DECODER_SECAM         4       /* can decode SECAM */
++#define       S3C_VIDEO_DECODER_AUTO          8       /* can autosense norm */
++#define       S3C_VIDEO_DECODER_CCIR          16      /* CCIR-601 pixel rate (720 pixels per line) instead of square pixel rate */
++
++#define S3C_DECODER_INIT              _IOW ('V', BASE_VIDIOC_PRIVATE + 14, struct s3c_video_decoder_init)     /* init internal registers at once */
++#define       S3C_DECODER_GET_CAPABILITIES    _IOR ('V', BASE_VIDIOC_PRIVATE + 6,  struct s3c_video_decoder_capability)
++#define       S3C_DECODER_GET_STATUS          _IOR ('V', BASE_VIDIOC_PRIVATE + 7,  int)
++#define       S3C_DECODER_SET_NORM            _IOW ('V', BASE_VIDIOC_PRIVATE + 8,  int)
++#define       S3C_DECODER_SET_INPUT           _IOW ('V', BASE_VIDIOC_PRIVATE + 9,  int)                                       /* 0 <= input < #inputs */
++#define       S3C_DECODER_SET_OUTPUT          _IOW ('V', BASE_VIDIOC_PRIVATE + 10, int)                                       /* 0 <= output < #outputs */
++#define       S3C_DECODER_ENABLE_OUTPUT       _IOW ('V', BASE_VIDIOC_PRIVATE + 11, int)                                       /* boolean output enable control */
++#define       S3C_DECODER_SET_PICTURE         _IOW ('V', BASE_VIDIOC_PRIVATE + 12, struct video_picture)
++#define       S3C_DECODER_SET_GPIO            _IOW ('V', BASE_VIDIOC_PRIVATE + 13, int)                                       /* switch general purpose pin */
++#define       S3C_DECODER_SET_VBI_BYPASS      _IOW ('V', BASE_VIDIOC_PRIVATE + 15, int)                                       /* switch vbi bypass */
++#define       S3C_DECODER_DUMP                _IO  ('V', BASE_VIDIOC_PRIVATE + 16)                                    /* debug hook */
++
++enum v4l2_msdma_input {
++      V4L2_MSDMA_CODEC = 1,
++      V4L2_MSDMA_PREVIEW = 2,
++};
++
++struct v4l2_msdma_format
++{
++      __u32                   width;          /* MSDMA INPUT : Source X size */
++      __u32                   height;         /* MSDMA INPUT : Source Y size */
++      __u32                   pixelformat;
++      enum v4l2_msdma_input   input_path;
++};
++
++struct v4l2_interlace_format
++{
++      __u32 width;    /* INTERLACE INPUT : Source X size */
++      __u32 height;   /* INTERLACE INPUT : Source Y size */
++};
++
++struct s3c_video_decoder_init {
++      unsigned char len;
++      const unsigned char *data;
++};
++
++struct s3c_video_decoder_capability { /* this name is too long */
++      __u32   flags;
++      int     inputs;                 /* number of inputs */
++      int     outputs;                /* number of outputs */
++};
++
++static struct v4l2_input fimc_inputs[] = {
++      {
++              .index          = 0,
++              .name           = "S3C FIMC External Camera Input",
++              .type           = V4L2_INPUT_TYPE_CAMERA,
++              .audioset       = 1,
++              .tuner          = 0,
++              .std            = V4L2_STD_PAL_BG | V4L2_STD_NTSC_M,
++              .status         = 0,
++      },
++      {
++              .index          = 1,
++              .name           = "Memory Input (MSDMA)",
++              .type           = V4L2_INPUT_TYPE_MSDMA,
++              .audioset       = 2,
++              .tuner          = 0,
++              .std            = V4L2_STD_PAL_BG | V4L2_STD_NTSC_M,
++              .status         = 0,
++      }
++};
++
++static struct v4l2_output fimc_outputs[] = {
++      {
++              .index          = 0,
++              .name           = "Pingpong Memory Output",
++              .type           = 0,
++              .audioset       = 0,
++              .modulator      = 0,
++              .std            = 0,
++      },
++      {
++              .index          = 1,
++              .name           = "LCD FIFO Output",
++              .type           = 0,
++              .audioset       = 0,
++              .modulator      = 0,
++              .std            = 0,
++      }
++};
++
++const struct v4l2_fmtdesc fimc_codec_formats[] = {
++      {
++              .index          = 0,
++              .type           = V4L2_BUF_TYPE_VIDEO_CAPTURE,
++              .flags          = FORMAT_FLAGS_PACKED,
++              .description    = "16 bpp RGB, le",
++              .pixelformat    = V4L2_PIX_FMT_RGB565,
++      },
++      {
++              .index          = 1,
++              .type           = V4L2_BUF_TYPE_VIDEO_CAPTURE,
++              .flags          = FORMAT_FLAGS_PACKED,
++              .description    = "32 bpp RGB, le",
++              .pixelformat    = V4L2_PIX_FMT_BGR32,
++      },
++      {
++              .index          = 2,
++              .type           = V4L2_BUF_TYPE_VIDEO_CAPTURE,
++              .flags          = FORMAT_FLAGS_PLANAR,
++              .description    = "4:2:2, planar, Y-Cb-Cr",
++              .pixelformat    = V4L2_PIX_FMT_YUV422P,
++
++      },
++      {
++              .index          = 3,
++              .type           = V4L2_BUF_TYPE_VIDEO_CAPTURE,
++              .flags          = FORMAT_FLAGS_PLANAR,
++              .description    = "4:2:0, planar, Y-Cb-Cr",
++              .pixelformat    = V4L2_PIX_FMT_YUV420,
++      }
++};
++
++const struct v4l2_fmtdesc fimc_preview_formats[] = {
++      {
++              .index          = 0,
++              .type           = V4L2_BUF_TYPE_VIDEO_OVERLAY,
++              .flags          = FORMAT_FLAGS_PACKED,
++              .description    = "16 bpp RGB, le",
++              .pixelformat    = V4L2_PIX_FMT_RGB565,
++      },
++      {
++              .index          = 1,
++              .type           = V4L2_BUF_TYPE_VIDEO_OVERLAY,
++              .flags          = FORMAT_FLAGS_PACKED,
++              .description    = "24 bpp RGB, le",
++              .pixelformat    = V4L2_PIX_FMT_RGB24,
++      },
++      {
++              .index          = 2,
++              .type           = V4L2_BUF_TYPE_VIDEO_OVERLAY,
++              .flags          = FORMAT_FLAGS_PACKED,
++              .description    = "32 bpp RGB, le",
++              .pixelformat    = V4L2_PIX_FMT_BGR32,
++      },
++      {
++              .index          = 3,
++              .type           = V4L2_BUF_TYPE_VIDEO_OVERLAY,
++              .flags          = FORMAT_FLAGS_PLANAR,
++              .description    = "4:2:2, planar, Y-Cb-Cr",
++              .pixelformat    = V4L2_PIX_FMT_YUV422P,
++
++      },
++      {
++              .index          = 4,
++              .type           = V4L2_BUF_TYPE_VIDEO_OVERLAY,
++              .flags          = FORMAT_FLAGS_PLANAR,
++              .description    = "4:2:0, planar, Y-Cb-Cr",
++              .pixelformat    = V4L2_PIX_FMT_YUV420,
++      }
++};
++
++#define NUMBER_OF_PREVIEW_FORMATS     ARRAY_SIZE(fimc_preview_formats)
++#define NUMBER_OF_CODEC_FORMATS               ARRAY_SIZE(fimc_codec_formats)
++#define NUMBER_OF_INPUTS              ARRAY_SIZE(fimc_inputs)
++#define NUMBER_OF_OUTPUTS             ARRAY_SIZE(fimc_outputs)
++
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-core.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-core.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-core.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-core.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,1457 @@
++/* Smedia Glamo 336x/337x driver
++ *
++ * (C) 2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/tty.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/wait.h>
++#include <linux/platform_device.h>
++#include <linux/kernel_stat.h>
++#include <linux/spinlock.h>
++#include <linux/glamofb.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/div64.h>
++
++//#include <mach/regs-irq.h>
++
++#ifdef CONFIG_PM
++#include <linux/pm.h>
++#endif
++
++#include "glamo-regs.h"
++#include "glamo-core.h"
++
++#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
++
++#define GLAMO_MEM_REFRESH_COUNT 0x100
++
++
++/*
++ * Glamo internal settings
++ *
++ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
++ * above.  Couple of GTA02 users report trouble with memory bus when they
++ * upgraded from 2.6.24.  So this parameter allows reversion to 2.6.24
++ * scheme if their Glamo chip needs it.
++ *
++ * you can override the faster default on kernel commandline using
++ *
++ *   glamo3362.slow_memory=1
++ *
++ * for example
++ */
++
++static int slow_memory = 0;
++module_param(slow_memory, int, 0644);
++
++struct reg_range {
++      int start;
++      int count;
++      char *name;
++      char dump;
++};
++struct reg_range reg_range[] = {
++      { 0x0000, 0x76,         "General",      1 },
++      { 0x0200, 0x16,         "Host Bus",     1 },
++      { 0x0300, 0x38,         "Memory",       1 },
++/*    { 0x0400, 0x100,        "Sensor",       0 }, */
++/*            { 0x0500, 0x300,        "ISP",          0 }, */
++/*            { 0x0800, 0x400,        "JPEG",         0 }, */
++/*            { 0x0c00, 0xcc,         "MPEG",         0 }, */
++      { 0x1100, 0xb2,         "LCD 1",        1 },
++      { 0x1200, 0x64,         "LCD 2",        1 },
++      { 0x1400, 0x40,         "MMC",          1 },
++/*            { 0x1500, 0x080,        "MPU 0",        0 },
++      { 0x1580, 0x080,        "MPU 1",        0 },
++      { 0x1600, 0x080,        "Cmd Queue",    0 },
++      { 0x1680, 0x080,        "RISC CPU",     0 },
++      { 0x1700, 0x400,        "2D Unit",      0 },
++      { 0x1b00, 0x900,        "3D Unit",      0 }, */
++};
++
++static struct glamo_core *glamo_handle;
++
++static inline void __reg_write(struct glamo_core *glamo,
++                              u_int16_t reg, u_int16_t val)
++{
++      writew(val, glamo->base + reg);
++}
++
++static inline u_int16_t __reg_read(struct glamo_core *glamo,
++                                 u_int16_t reg)
++{
++      return readw(glamo->base + reg);
++}
++
++static void __reg_set_bit_mask(struct glamo_core *glamo,
++                              u_int16_t reg, u_int16_t mask,
++                              u_int16_t val)
++{
++      u_int16_t tmp;
++
++      val &= mask;
++
++      tmp = __reg_read(glamo, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      __reg_write(glamo, reg, tmp);
++}
++
++static void reg_set_bit_mask(struct glamo_core *glamo,
++                              u_int16_t reg, u_int16_t mask,
++                              u_int16_t val)
++{
++      spin_lock(&glamo->lock);
++      __reg_set_bit_mask(glamo, reg, mask, val);
++      spin_unlock(&glamo->lock);
++}
++
++static inline void __reg_set_bit(struct glamo_core *glamo,
++                               u_int16_t reg, u_int16_t bit)
++{
++      __reg_set_bit_mask(glamo, reg, bit, 0xffff);
++}
++
++static inline void __reg_clear_bit(struct glamo_core *glamo,
++                                 u_int16_t reg, u_int16_t bit)
++{
++      __reg_set_bit_mask(glamo, reg, bit, 0);
++}
++
++static inline void glamo_vmem_write(struct glamo_core *glamo, u_int32_t addr,
++                                  u_int16_t *src, int len)
++{
++      if (addr & 0x0001 || (unsigned long)src & 0x0001 || len & 0x0001) {
++              dev_err(&glamo->pdev->dev, "unaligned write(0x%08x, 0x%p, "
++                      "0x%x)!!\n", addr, src, len);
++      }
++
++}
++
++static inline void glamo_vmem_read(struct glamo_core *glamo, u_int16_t *buf,
++                                 u_int32_t addr, int len)
++{
++      if (addr & 0x0001 || (unsigned long) buf & 0x0001 || len & 0x0001) {
++              dev_err(&glamo->pdev->dev, "unaligned read(0x%p, 0x08%x, "
++                      "0x%x)!!\n", buf, addr, len);
++      }
++
++
++}
++
++/***********************************************************************
++ * resources of sibling devices
++ ***********************************************************************/
++
++#if 0
++static struct resource glamo_core_resources[] = {
++      {
++              .start  = GLAMO_REGOFS_GENERIC,
++              .end    = GLAMO_REGOFS_GENERIC + 0x400,
++              .flags  = IORESOURCE_MEM,
++      }, {
++              .start  = 0,
++              .end    = 0,
++              .flags  = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device glamo_core_dev = {
++      .name           = "glamo-core",
++      .resource       = &glamo_core_resources,
++      .num_resources  = ARRAY_SIZE(glamo_core_resources),
++};
++#endif
++
++static struct resource glamo_jpeg_resources[] = {
++      {
++              .start  = GLAMO_REGOFS_JPEG,
++              .end    = GLAMO_REGOFS_MPEG - 1,
++              .flags  = IORESOURCE_MEM,
++      }, {
++              .start  = IRQ_GLAMO_JPEG,
++              .end    = IRQ_GLAMO_JPEG,
++              .flags  = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device glamo_jpeg_dev = {
++      .name           = "glamo-jpeg",
++      .resource       = glamo_jpeg_resources,
++      .num_resources  = ARRAY_SIZE(glamo_jpeg_resources),
++};
++
++static struct resource glamo_mpeg_resources[] = {
++      {
++              .start  = GLAMO_REGOFS_MPEG,
++              .end    = GLAMO_REGOFS_LCD - 1,
++              .flags  = IORESOURCE_MEM,
++      }, {
++              .start  = IRQ_GLAMO_MPEG,
++              .end    = IRQ_GLAMO_MPEG,
++              .flags  = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device glamo_mpeg_dev = {
++      .name           = "glamo-mpeg",
++      .resource       = glamo_mpeg_resources,
++      .num_resources  = ARRAY_SIZE(glamo_mpeg_resources),
++};
++
++static struct resource glamo_2d_resources[] = {
++      {
++              .start  = GLAMO_REGOFS_2D,
++              .end    = GLAMO_REGOFS_3D - 1,
++              .flags  = IORESOURCE_MEM,
++      }, {
++              .start  = IRQ_GLAMO_2D,
++              .end    = IRQ_GLAMO_2D,
++              .flags  = IORESOURCE_IRQ,
++      },
++};
++
++static struct platform_device glamo_2d_dev = {
++      .name           = "glamo-2d",
++      .resource       = glamo_2d_resources,
++      .num_resources  = ARRAY_SIZE(glamo_2d_resources),
++};
++
++static struct resource glamo_3d_resources[] = {
++      {
++              .start  = GLAMO_REGOFS_3D,
++              .end    = GLAMO_REGOFS_END - 1,
++              .flags  = IORESOURCE_MEM,
++      },
++};
++
++static struct platform_device glamo_3d_dev = {
++      .name           = "glamo-3d",
++      .resource       = glamo_3d_resources,
++      .num_resources  = ARRAY_SIZE(glamo_3d_resources),
++};
++
++static struct platform_device glamo_spigpio_dev = {
++      .name           = "glamo-spi-gpio",
++};
++
++static struct resource glamo_fb_resources[] = {
++      /* FIXME: those need to be incremented by parent base */
++      {
++              .name   = "glamo-fb-regs",
++              .start  = GLAMO_REGOFS_LCD,
++              .end    = GLAMO_REGOFS_MMC - 1,
++              .flags  = IORESOURCE_MEM,
++      }, {
++              .name   = "glamo-fb-mem",
++              .start  = GLAMO_OFFSET_FB,
++              .end    = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
++              .flags  = IORESOURCE_MEM,
++      },
++};
++
++static struct platform_device glamo_fb_dev = {
++      .name           = "glamo-fb",
++      .resource       = glamo_fb_resources,
++      .num_resources  = ARRAY_SIZE(glamo_fb_resources),
++};
++
++static struct resource glamo_mmc_resources[] = {
++      {
++              /* FIXME: those need to be incremented by parent base */
++              .start  = GLAMO_REGOFS_MMC,
++              .end    = GLAMO_REGOFS_MPROC0 - 1,
++              .flags  = IORESOURCE_MEM
++      }, {
++              .start  = IRQ_GLAMO_MMC,
++              .end    = IRQ_GLAMO_MMC,
++              .flags  = IORESOURCE_IRQ,
++      }, { /* our data buffer for MMC transfers */
++              .start  = GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
++              .end    = GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
++                                GLAMO_MMC_BUFFER_SIZE - 1,
++              .flags  = IORESOURCE_MEM
++      },
++};
++
++struct glamo_mci_pdata glamo_mci_def_pdata = {
++      .gpio_detect            = 0,
++      .glamo_can_set_mci_power        = NULL, /* filled in from MFD platform data */
++      .ocr_avail      = MMC_VDD_20_21 |
++                        MMC_VDD_21_22 |
++                        MMC_VDD_22_23 |
++                        MMC_VDD_23_24 |
++                        MMC_VDD_24_25 |
++                        MMC_VDD_25_26 |
++                        MMC_VDD_26_27 |
++                        MMC_VDD_27_28 |
++                        MMC_VDD_28_29 |
++                        MMC_VDD_29_30 |
++                        MMC_VDD_30_31 |
++                        MMC_VDD_32_33,
++      .glamo_irq_is_wired     = NULL, /* filled in from MFD platform data */
++      .mci_suspending = NULL, /* filled in from MFD platform data */
++      .mci_all_dependencies_resumed = NULL, /* filled in from MFD platform data */
++};
++EXPORT_SYMBOL_GPL(glamo_mci_def_pdata);
++
++
++
++static void mangle_mem_resources(struct resource *res, int num_res,
++                               struct resource *parent)
++{
++      int i;
++
++      for (i = 0; i < num_res; i++) {
++              if (res[i].flags != IORESOURCE_MEM)
++                      continue;
++              res[i].start += parent->start;
++              res[i].end += parent->start;
++              res[i].parent = parent;
++      }
++}
++
++/***********************************************************************
++ * IRQ demultiplexer
++ ***********************************************************************/
++#define irq2glamo(x)  (x - IRQ_GLAMO(0))
++
++static void glamo_ack_irq(unsigned int irq)
++{
++      /* clear interrupt source */
++      __reg_write(glamo_handle, GLAMO_REG_IRQ_CLEAR,
++                  1 << irq2glamo(irq));
++}
++
++static void glamo_mask_irq(unsigned int irq)
++{
++      u_int16_t tmp;
++
++      /* clear bit in enable register */
++      tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
++      tmp &= ~(1 << irq2glamo(irq));
++      __reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
++}
++
++static void glamo_unmask_irq(unsigned int irq)
++{
++      u_int16_t tmp;
++
++      /* set bit in enable register */
++      tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
++      tmp |= (1 << irq2glamo(irq));
++      __reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
++}
++
++static struct irq_chip glamo_irq_chip = {
++      .ack    = glamo_ack_irq,
++      .mask   = glamo_mask_irq,
++      .unmask = glamo_unmask_irq,
++};
++
++static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
++{
++      const unsigned int cpu = smp_processor_id();
++
++      desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
++
++      if (unlikely(desc->status & IRQ_INPROGRESS)) {
++              desc->status |= (IRQ_PENDING | IRQ_MASKED);
++              desc->chip->mask(irq);
++              desc->chip->ack(irq);
++              return;
++      }
++
++      kstat_cpu(cpu).irqs[irq]++;
++      desc->chip->ack(irq);
++      desc->status |= IRQ_INPROGRESS;
++
++      do {
++              u_int16_t irqstatus;
++              int i;
++
++              if (unlikely((desc->status &
++                              (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
++                              (IRQ_PENDING | IRQ_MASKED))) {
++                      /* dealing with pending IRQ, unmasking */
++                      desc->chip->unmask(irq);
++                      desc->status &= ~IRQ_MASKED;
++              }
++
++              desc->status &= ~IRQ_PENDING;
++
++              /* read IRQ status register */
++              irqstatus = __reg_read(glamo_handle, GLAMO_REG_IRQ_STATUS);
++              for (i = 0; i < 9; i++)
++                      if (irqstatus & (1 << i))
++                              desc_handle_irq(IRQ_GLAMO(i),
++                                  irq_desc+IRQ_GLAMO(i));
++
++      } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
++
++      desc->status &= ~IRQ_INPROGRESS;
++}
++
++
++static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      unsigned long reg = simple_strtoul(buf, NULL, 10);
++      struct glamo_core *glamo = dev_get_drvdata(dev);
++
++      while (*buf && (*buf != ' '))
++              buf++;
++      if (*buf != ' ')
++              return -EINVAL;
++      while (*buf && (*buf == ' '))
++              buf++;
++      if (!*buf)
++              return -EINVAL;
++
++      printk(KERN_INFO"reg 0x%02lX <-- 0x%04lX\n",
++             reg, simple_strtoul(buf, NULL, 10));
++
++      __reg_write(glamo, reg, simple_strtoul(buf, NULL, 10));
++
++      return count;
++}
++
++static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
++                      char *buf)
++{
++      struct glamo_core *glamo = dev_get_drvdata(dev);
++      int n, n1 = 0, r;
++      char * end = buf;
++
++      spin_lock(&glamo->lock);
++
++      for (r = 0; r < ARRAY_SIZE(reg_range); r++) {
++              if (!reg_range[r].dump)
++                      continue;
++              n1 = 0;
++              end += sprintf(end, "\n%s\n", reg_range[r].name);
++              for (n = reg_range[r].start;
++                   n < reg_range[r].start + reg_range[r].count; n += 2) {
++                      if (((n1++) & 7) == 0)
++                              end += sprintf(end, "\n%04X:  ", n);
++                      end += sprintf(end, "%04x ", __reg_read(glamo, n));
++              }
++              end += sprintf(end, "\n");
++              if (!attr) {
++                      printk("%s", buf);
++                      end = buf;
++              }
++      }
++      spin_unlock(&glamo->lock);
++
++      return end - buf;
++}
++
++static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
++static struct attribute *glamo_sysfs_entries[] = {
++      &dev_attr_regs.attr,
++      NULL
++};
++static struct attribute_group glamo_attr_group = {
++      .name   = NULL,
++      .attrs  = glamo_sysfs_entries,
++};
++
++
++
++/***********************************************************************
++ * 'engine' support
++ ***********************************************************************/
++
++int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++      switch (engine) {
++      case GLAMO_ENGINE_LCD:
++              __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
++                                 GLAMO_HOSTBUS2_MMIO_EN_LCD,
++                                 GLAMO_HOSTBUS2_MMIO_EN_LCD);
++              __reg_write(glamo, GLAMO_REG_CLOCK_LCD,
++                          GLAMO_CLOCK_LCD_EN_M5CLK |
++                          GLAMO_CLOCK_LCD_EN_DHCLK |
++                          GLAMO_CLOCK_LCD_EN_DMCLK |
++                          GLAMO_CLOCK_LCD_EN_DCLK |
++                          GLAMO_CLOCK_LCD_DG_M5CLK |
++                          GLAMO_CLOCK_LCD_DG_DMCLK);
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
++                          GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
++                          GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
++                          GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0xffff);
++              break;
++      case GLAMO_ENGINE_MMC:
++              __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
++                                 GLAMO_HOSTBUS2_MMIO_EN_MMC,
++                                 GLAMO_HOSTBUS2_MMIO_EN_MMC);
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
++                                 GLAMO_CLOCK_MMC_EN_M9CLK |
++                                 GLAMO_CLOCK_MMC_EN_TCLK |
++                                 GLAMO_CLOCK_MMC_DG_M9CLK |
++                                 GLAMO_CLOCK_MMC_DG_TCLK, 0xffff);
++              /* enable the TCLK divider clk input */
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
++                                               GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
++                                               GLAMO_CLOCK_GEN51_EN_DIV_TCLK);
++              break;
++      case GLAMO_ENGINE_2D:
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
++                                 GLAMO_CLOCK_2D_EN_M7CLK |
++                                 GLAMO_CLOCK_2D_EN_GCLK |
++                                 GLAMO_CLOCK_2D_DG_M7CLK |
++                                 GLAMO_CLOCK_2D_DG_GCLK, 0xffff);
++              __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
++                                 GLAMO_HOSTBUS2_MMIO_EN_2D,
++                                 GLAMO_HOSTBUS2_MMIO_EN_2D);
++              break;
++      case GLAMO_ENGINE_CMDQ:
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
++                                 GLAMO_CLOCK_2D_EN_M6CLK, 0xffff);
++              __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
++                                 GLAMO_HOSTBUS2_MMIO_EN_CQ,
++                                 GLAMO_HOSTBUS2_MMIO_EN_CQ);
++              break;
++      /* FIXME: Implementation */
++      default:
++              break;
++      }
++
++      glamo->engine_enabled_bitfield |= 1 << engine;
++
++      return 0;
++}
++
++int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++      int ret;
++
++      spin_lock(&glamo->lock);
++
++      ret = __glamo_engine_enable(glamo, engine);
++
++      spin_unlock(&glamo->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_enable);
++
++int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++      switch (engine) {
++      case GLAMO_ENGINE_LCD:
++              /* remove pixel clock to LCM */
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
++                          GLAMO_CLOCK_LCD_EN_DCLK, 0);
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
++                          GLAMO_CLOCK_LCD_EN_DHCLK |
++                          GLAMO_CLOCK_LCD_EN_DMCLK, 0);
++              /* kill memory clock */
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
++                          GLAMO_CLOCK_LCD_EN_M5CLK, 0);
++              /* stop dividing the clocks */
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
++                          GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
++                          GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
++                          GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0);
++              break;
++
++      case GLAMO_ENGINE_MMC:
++//            __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
++//                                               GLAMO_CLOCK_MMC_EN_M9CLK |
++//                                               GLAMO_CLOCK_MMC_EN_TCLK |
++//                                               GLAMO_CLOCK_MMC_DG_M9CLK |
++//                                               GLAMO_CLOCK_MMC_DG_TCLK, 0);
++              /* disable the TCLK divider clk input */
++//            __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
++//                                    GLAMO_CLOCK_GEN51_EN_DIV_TCLK, 0);
++
++      default:
++              break;
++      }
++
++      glamo->engine_enabled_bitfield &= ~(1 << engine);
++
++      return 0;
++}
++int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
++{
++      int ret;
++
++      spin_lock(&glamo->lock);
++
++      ret = __glamo_engine_disable(glamo, engine);
++
++      spin_unlock(&glamo->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_disable);
++
++static const u_int16_t engine_clock_regs[__NUM_GLAMO_ENGINES] = {
++      [GLAMO_ENGINE_LCD]      = GLAMO_REG_CLOCK_LCD,
++      [GLAMO_ENGINE_MMC]      = GLAMO_REG_CLOCK_MMC,
++      [GLAMO_ENGINE_ISP]      = GLAMO_REG_CLOCK_ISP,
++      [GLAMO_ENGINE_JPEG]     = GLAMO_REG_CLOCK_JPEG,
++      [GLAMO_ENGINE_3D]       = GLAMO_REG_CLOCK_3D,
++      [GLAMO_ENGINE_2D]       = GLAMO_REG_CLOCK_2D,
++      [GLAMO_ENGINE_MPEG_ENC] = GLAMO_REG_CLOCK_MPEG,
++      [GLAMO_ENGINE_MPEG_DEC] = GLAMO_REG_CLOCK_MPEG,
++};
++
++void glamo_engine_clkreg_set(struct glamo_core *glamo,
++                           enum glamo_engine engine,
++                           u_int16_t mask, u_int16_t val)
++{
++      reg_set_bit_mask(glamo, engine_clock_regs[engine], mask, val);
++}
++EXPORT_SYMBOL_GPL(glamo_engine_clkreg_set);
++
++u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
++                                enum glamo_engine engine)
++{
++      u_int16_t val;
++
++      spin_lock(&glamo->lock);
++      val = __reg_read(glamo, engine_clock_regs[engine]);
++      spin_unlock(&glamo->lock);
++
++      return val;
++}
++EXPORT_SYMBOL_GPL(glamo_engine_clkreg_get);
++
++struct glamo_script reset_regs[] = {
++      [GLAMO_ENGINE_LCD] = {
++              GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
++      },
++#if 0
++      [GLAMO_ENGINE_HOST] = {
++              GLAMO_REG_CLOCK_HOST, GLAMO_CLOCK_HOST_RESET
++      },
++      [GLAMO_ENGINE_MEM] = {
++              GLAMO_REG_CLOCK_MEM, GLAMO_CLOCK_MEM_RESET
++      },
++#endif
++      [GLAMO_ENGINE_MMC] = {
++              GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
++      },
++      [GLAMO_ENGINE_2D] = {
++              GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
++      },
++      [GLAMO_ENGINE_JPEG] = {
++              GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
++      },
++};
++
++void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
++{
++      struct glamo_script *rst;
++
++      if (engine >= ARRAY_SIZE(reset_regs)) {
++              dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
++              return;
++      }
++
++      rst = &reset_regs[engine];
++
++      spin_lock(&glamo->lock);
++      __reg_set_bit(glamo, rst->reg, rst->val);
++      __reg_clear_bit(glamo, rst->reg, rst->val);
++      spin_unlock(&glamo->lock);
++}
++EXPORT_SYMBOL_GPL(glamo_engine_reset);
++
++void glamo_lcm_reset(int level)
++{
++      if (!glamo_handle)
++              return;
++
++      glamo_gpio_setpin(glamo_handle, GLAMO_GPIO4, level);
++      glamo_gpio_cfgpin(glamo_handle, GLAMO_GPIO4_OUTPUT);
++
++}
++EXPORT_SYMBOL_GPL(glamo_lcm_reset);
++
++enum glamo_pll {
++      GLAMO_PLL1,
++      GLAMO_PLL2,
++};
++
++static int glamo_pll_rate(struct glamo_core *glamo,
++                        enum glamo_pll pll)
++{
++      u_int16_t reg;
++      unsigned int div = 512;
++      /* FIXME: move osci into platform_data */
++      unsigned int osci = 32768;
++
++      if (osci == 32768)
++              div = 1;
++
++      switch (pll) {
++      case GLAMO_PLL1:
++              reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
++              break;
++      case GLAMO_PLL2:
++              reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
++              break;
++      default:
++              return -EINVAL;
++      }
++      return (osci/div)*reg;
++}
++
++int glamo_engine_reclock(struct glamo_core *glamo,
++                       enum glamo_engine engine,
++                       int ps)
++{
++      int pll, khz;
++      u_int16_t reg, mask, val = 0;
++
++      if (!ps)
++              return 0;
++
++      switch (engine) {
++      case GLAMO_ENGINE_LCD:
++              pll = GLAMO_PLL1;
++              reg = GLAMO_REG_CLOCK_GEN7;
++              mask = 0xff;
++              break;
++      default:
++              dev_warn(&glamo->pdev->dev,
++                       "reclock of engine 0x%x not supported\n", engine);
++              return -EINVAL;
++              break;
++      }
++
++      pll = glamo_pll_rate(glamo, pll);
++      khz = 1000000000UL / ps;
++
++      if (khz)
++              val = (pll / khz) / 1000;
++
++      dev_dbg(&glamo->pdev->dev,
++                      "PLL %d, kHZ %d, div %d\n", pll, khz, val);
++
++      if (val) {
++              val--;
++              reg_set_bit_mask(glamo, reg, mask, val);
++              mdelay(5); /* wait some time to stabilize */
++
++              return 0;
++      } else {
++              return -EINVAL;
++      }
++}
++EXPORT_SYMBOL_GPL(glamo_engine_reclock);
++
++/***********************************************************************
++ * script support
++ ***********************************************************************/
++
++int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
++                   int len, int may_sleep)
++{
++      int i;
++
++      for (i = 0; i < len; i++) {
++              struct glamo_script *line = &script[i];
++
++              switch (line->reg) {
++              case 0xffff:
++                      return 0;
++              case 0xfffe:
++                      if (may_sleep)
++                              msleep(line->val);
++                      else
++                              mdelay(line->val * 4);
++                      break;
++              case 0xfffd:
++                      /* spin until PLLs lock */
++                      while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
++                              ;
++                      break;
++
++              /*
++               * couple of people reported artefacts with 2.6.28 changes, this
++               * allows reversion to 2.6.24 settings
++               */
++
++              case 0x200:
++                      switch (slow_memory) {
++                      /* choice 1 is the most conservative */
++                      case 1: /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xef0);
++                              break;
++                      case 2: /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xea0);
++                              break;
++                      case 3: /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xe50);
++                              break;
++                      case 4: /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xe00);
++                              break;
++
++                      /* using PLL2 for memory bus increases CPU bandwidth significantly */
++                      case 5: /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xef3);
++                              break;
++                      case 6: /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xea3);
++                              break;
++                      case 7: /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xe53);
++                              break;
++                      /* default of 0 or >7 is fastest */
++                      default: /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
++                              __reg_write(glamo, script[i].reg, 0xe03);
++                              break;
++                      }
++                      break;
++
++              default:
++                      __reg_write(glamo, script[i].reg, script[i].val);
++                      break;
++              }
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL(glamo_run_script);
++
++static struct glamo_script glamo_init_script[] = {
++      { GLAMO_REG_CLOCK_HOST,         0x1000 },
++              { 0xfffe, 2 },
++      { GLAMO_REG_CLOCK_MEMORY,       0x1000 },
++      { GLAMO_REG_CLOCK_MEMORY,       0x2000 },
++      { GLAMO_REG_CLOCK_LCD,          0x1000 },
++      { GLAMO_REG_CLOCK_MMC,          0x1000 },
++      { GLAMO_REG_CLOCK_ISP,          0x1000 },
++      { GLAMO_REG_CLOCK_ISP,          0x3000 },
++      { GLAMO_REG_CLOCK_JPEG,         0x1000 },
++      { GLAMO_REG_CLOCK_3D,           0x1000 },
++      { GLAMO_REG_CLOCK_3D,           0x3000 },
++      { GLAMO_REG_CLOCK_2D,           0x1000 },
++      { GLAMO_REG_CLOCK_2D,           0x3000 },
++      { GLAMO_REG_CLOCK_RISC1,        0x1000 },
++      { GLAMO_REG_CLOCK_MPEG,         0x3000 },
++      { GLAMO_REG_CLOCK_MPEG,         0x3000 },
++      { GLAMO_REG_CLOCK_MPROC,        0x1000 /*0x100f*/ },
++              { 0xfffe, 2 },
++      { GLAMO_REG_CLOCK_HOST,         0x0000 },
++      { GLAMO_REG_CLOCK_MEMORY,       0x0000 },
++      { GLAMO_REG_CLOCK_LCD,          0x0000 },
++      { GLAMO_REG_CLOCK_MMC,          0x0000 },
++#if 0
++/* unused engines must be left in reset to stop MMC block read "blackouts" */
++      { GLAMO_REG_CLOCK_ISP,          0x0000 },
++      { GLAMO_REG_CLOCK_ISP,          0x0000 },
++      { GLAMO_REG_CLOCK_JPEG,         0x0000 },
++      { GLAMO_REG_CLOCK_3D,           0x0000 },
++      { GLAMO_REG_CLOCK_3D,           0x0000 },
++      { GLAMO_REG_CLOCK_2D,           0x0000 },
++      { GLAMO_REG_CLOCK_2D,           0x0000 },
++      { GLAMO_REG_CLOCK_RISC1,        0x0000 },
++      { GLAMO_REG_CLOCK_MPEG,         0x0000 },
++      { GLAMO_REG_CLOCK_MPEG,         0x0000 },
++#endif
++      { GLAMO_REG_PLL_GEN1,           0x05db },       /* 48MHz */
++      { GLAMO_REG_PLL_GEN3,           0x0aba },       /* 90MHz */
++      { 0xfffd, 0 },
++      /*
++       * b9 of this register MUST be zero to get any interrupts on INT#
++       * the other set bits enable all the engine interrupt sources
++       */
++      { GLAMO_REG_IRQ_ENABLE,         0x01ff },
++      { GLAMO_REG_CLOCK_GEN6,         0x2000 },
++      { GLAMO_REG_CLOCK_GEN7,         0x0101 },
++      { GLAMO_REG_CLOCK_GEN8,         0x0100 },
++      { GLAMO_REG_CLOCK_HOST,         0x000d },
++      /*
++       * b7..b4 = 0 = no wait states on read or write
++       * b0 = 1 select PLL2 for Host interface, b1 = enable it
++       */
++      { 0x200,        0x0e03 /* this is replaced by script parser */ },
++      { 0x202,        0x07ff },
++      { 0x212,        0x0000 },
++      { 0x214,        0x4000 },
++      { 0x216,        0xf00e },
++
++      /* S-Media recommended "set tiling mode to 512 mode for memory access
++       * more efficiency when 640x480" */
++      { GLAMO_REG_MEM_TYPE,           0x0c74 }, /* 8MB, 16 word pg wr+rd */
++      { GLAMO_REG_MEM_GEN,            0xafaf }, /* 63 grants min + max */
++
++      { GLAMO_REGOFS_HOSTBUS + 2,     0xffff }, /* enable  on MMIO*/
++
++      { GLAMO_REG_MEM_TIMING1,        0x0108 },
++      { GLAMO_REG_MEM_TIMING2,        0x0010 }, /* Taa = 3 MCLK */
++      { GLAMO_REG_MEM_TIMING3,        0x0000 },
++      { GLAMO_REG_MEM_TIMING4,        0x0000 }, /* CE1# delay fall/rise */
++      { GLAMO_REG_MEM_TIMING5,        0x0000 }, /* UB# LB# */
++      { GLAMO_REG_MEM_TIMING6,        0x0000 }, /* OE# */
++      { GLAMO_REG_MEM_TIMING7,        0x0000 }, /* WE# */
++      { GLAMO_REG_MEM_TIMING8,        0x1002 }, /* MCLK delay, was 0x1000 */
++      { GLAMO_REG_MEM_TIMING9,        0x6006 },
++      { GLAMO_REG_MEM_TIMING10,       0x00ff },
++      { GLAMO_REG_MEM_TIMING11,       0x0001 },
++      { GLAMO_REG_MEM_POWER1,         0x0020 },
++      { GLAMO_REG_MEM_POWER2,         0x0000 },
++      { GLAMO_REG_MEM_DRAM1,          0x0000 },
++              { 0xfffe, 1 },
++      { GLAMO_REG_MEM_DRAM1,          0xc100 },
++              { 0xfffe, 1 },
++      { GLAMO_REG_MEM_DRAM1,          0xe100 },
++      { GLAMO_REG_MEM_DRAM2,          0x01d6 },
++      { GLAMO_REG_CLOCK_MEMORY,       0x000b },
++      { GLAMO_REG_GPIO_GEN1,          0x000f },
++      { GLAMO_REG_GPIO_GEN2,          0x111e },
++      { GLAMO_REG_GPIO_GEN3,          0xccc3 },
++      { GLAMO_REG_GPIO_GEN4,          0x111e },
++      { GLAMO_REG_GPIO_GEN5,          0x000f },
++};
++#if 0
++static struct glamo_script glamo_resume_script[] = {
++
++      { GLAMO_REG_PLL_GEN1,           0x05db },       /* 48MHz */
++      { GLAMO_REG_PLL_GEN3,           0x0aba },       /* 90MHz */
++      { GLAMO_REG_DFT_GEN6, 1 },
++              { 0xfffe, 100 },
++              { 0xfffd, 0 },
++      { 0x200,        0x0e03 },
++
++      /*
++       * b9 of this register MUST be zero to get any interrupts on INT#
++       * the other set bits enable all the engine interrupt sources
++       */
++      { GLAMO_REG_IRQ_ENABLE,         0x01ff },
++      { GLAMO_REG_CLOCK_HOST,         0x0018 },
++      { GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
++
++      { GLAMO_REG_MEM_DRAM1,          0x0000 },
++              { 0xfffe, 1 },
++      { GLAMO_REG_MEM_DRAM1,          0xc100 },
++              { 0xfffe, 1 },
++      { GLAMO_REG_MEM_DRAM1,          0xe100 },
++      { GLAMO_REG_MEM_DRAM2,          0x01d6 },
++      { GLAMO_REG_CLOCK_MEMORY,       0x000b },
++};
++#endif
++
++enum glamo_power {
++      GLAMO_POWER_ON,
++      GLAMO_POWER_SUSPEND,
++};
++
++static void glamo_power(struct glamo_core *glamo,
++                      enum glamo_power new_state)
++{
++      int n;
++      unsigned long flags;
++      
++      spin_lock_irqsave(&glamo->lock, flags);
++
++      dev_info(&glamo->pdev->dev, "***** glamo_power -> %d\n", new_state);
++
++      /*
++Power management
++static const REG_VALUE_MASK_TYPE reg_powerOn[] =
++{
++    { REG_GEN_DFT6,     REG_BIT_ALL,    REG_DATA(1u << 0)           },
++    { REG_GEN_PLL3,     0u,             REG_DATA(1u << 13)          },
++    { REG_GEN_MEM_CLK,  REG_BIT_ALL,    REG_BIT_EN_MOCACLK          },
++    { REG_MEM_DRAM2,    0u,             REG_BIT_EN_DEEP_POWER_DOWN  },
++    { REG_MEM_DRAM1,    0u,             REG_BIT_SELF_REFRESH        }
++};
++
++static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
++{
++    { REG_MEM_DRAM1,    REG_BIT_ALL,    REG_BIT_SELF_REFRESH    },
++    { REG_GEN_MEM_CLK,  0u,             REG_BIT_EN_MOCACLK      },
++    { REG_GEN_PLL3,     REG_BIT_ALL,    REG_DATA(1u << 13)      },
++    { REG_GEN_DFT5,     REG_BIT_ALL,    REG_DATA(1u << 0)       }
++};
++
++static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
++{
++    { REG_MEM_DRAM2,    REG_BIT_ALL,    REG_BIT_EN_DEEP_POWER_DOWN  },
++    { REG_GEN_MEM_CLK,  0u,             REG_BIT_EN_MOCACLK          },
++    { REG_GEN_PLL3,     REG_BIT_ALL,    REG_DATA(1u << 13)          },
++    { REG_GEN_DFT5,     REG_BIT_ALL,    REG_DATA(1u << 0)           }
++};
++*/
++
++      switch (new_state) {
++      case GLAMO_POWER_ON:
++
++              /*
++               * glamo state on resume is nondeterministic in some
++               * fundamental way, it has also been observed that the
++               * Glamo reset pin can get asserted by, eg, touching it with
++               * a scope probe.  So the only answer is to roll with it and
++               * force an external reset on the Glamo during resume.
++               */
++
++              (glamo->pdata->glamo_external_reset)(0);
++              udelay(10);
++              (glamo->pdata->glamo_external_reset)(1);
++              mdelay(5);
++
++              glamo_run_script(glamo, glamo_init_script,
++                       ARRAY_SIZE(glamo_init_script), 0);
++
++              break;
++
++      case GLAMO_POWER_SUSPEND:
++
++              /* nuke interrupts */
++              __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
++
++              /* stash a copy of which engines were running */
++              glamo->engine_enabled_bitfield_suspend =
++                                               glamo->engine_enabled_bitfield;
++
++              /* take down each engine before we kill mem and pll */
++              for (n = 0; n < __NUM_GLAMO_ENGINES; n++)
++                      if (glamo->engine_enabled_bitfield & (1 << n))
++                              __glamo_engine_disable(glamo, n);
++
++              /* enable self-refresh */
++
++              __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
++                                      GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
++                                      GLAMO_MEM_DRAM1_EN_GATE_CKE |
++                                      GLAMO_MEM_DRAM1_SELF_REFRESH |
++                                      GLAMO_MEM_REFRESH_COUNT);
++              __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
++                                      GLAMO_MEM_DRAM1_EN_MODEREG_SET |
++                                      GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
++                                      GLAMO_MEM_DRAM1_EN_GATE_CKE |
++                                      GLAMO_MEM_DRAM1_SELF_REFRESH |
++                                      GLAMO_MEM_REFRESH_COUNT);
++
++              /* force RAM into deep powerdown */
++
++              __reg_write(glamo, GLAMO_REG_MEM_DRAM2,
++                                      GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
++                                      (7 << 6) | /* tRC */
++                                      (1 << 4) | /* tRP */
++                                      (1 << 2) | /* tRCD */
++                                      2); /* CAS latency */
++
++              /* disable clocks to memory */
++              __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
++
++              /* all dividers from OSCI */
++              __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
++
++              /* PLL2 into bypass */
++              __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
++
++              __reg_write(glamo, 0x200, 0x0e00);
++
++
++              /* kill PLLS 1 then 2 */
++              __reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
++              __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
++
++              break;
++      }
++
++      spin_unlock_irqrestore(&glamo->lock, flags);
++}
++
++#if 0
++#define MEMDETECT_RETRY       6
++static unsigned int detect_memsize(struct glamo_core *glamo)
++{
++      int i;
++
++      /*static const u_int16_t pattern[] = {
++              0x1111, 0x8a8a, 0x2222, 0x7a7a,
++              0x3333, 0x6a6a, 0x4444, 0x5a5a,
++              0x5555, 0x4a4a, 0x6666, 0x3a3a,
++              0x7777, 0x2a2a, 0x8888, 0x1a1a
++      }; */
++
++      for (i = 0; i < MEMDETECT_RETRY; i++) {
++              switch (glamo->type) {
++              case 3600:
++                      __reg_write(glamo, GLAMO_REG_MEM_TYPE, 0x0072);
++                      __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
++                      break;
++              case 3650:
++                      switch (glamo->revision) {
++                      case GLAMO_CORE_REV_A0:
++                              if (i & 1)
++                                      __reg_write(glamo, GLAMO_REG_MEM_TYPE,
++                                                  0x097a);
++                              else
++                                      __reg_write(glamo, GLAMO_REG_MEM_TYPE,
++                                                  0x0173);
++
++                              __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
++                              msleep(1);
++                              __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
++                              break;
++                      default:
++                              if (i & 1)
++                                      __reg_write(glamo, GLAMO_REG_MEM_TYPE,
++                                                  0x0972);
++                              else
++                                      __reg_write(glamo, GLAMO_REG_MEM_TYPE,
++                                                  0x0872);
++
++                              __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
++                              msleep(1);
++                              __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xe100);
++                              break;
++                      }
++                      break;
++              case 3700:
++                      /* FIXME */
++              default:
++                      break;
++              }
++
++#if 0
++              /* FIXME: finish implementation */
++              for (j = 0; j < 8; j++) {
++                      __
++#endif
++      }
++
++      return 0;
++}
++#endif
++
++/* Find out if we can support this version of the Glamo chip */
++static int glamo_supported(struct glamo_core *glamo)
++{
++      u_int16_t dev_id, rev_id; /*, memsize; */
++
++      dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
++      rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
++
++      switch (dev_id) {
++      case 0x3650:
++              switch (rev_id) {
++              case GLAMO_CORE_REV_A2:
++                      break;
++              case GLAMO_CORE_REV_A0:
++              case GLAMO_CORE_REV_A1:
++              case GLAMO_CORE_REV_A3:
++                      dev_warn(&glamo->pdev->dev, "untested core revision "
++                               "%04x, your mileage may vary\n", rev_id);
++                      break;
++              default:
++                      dev_warn(&glamo->pdev->dev, "unknown glamo revision "
++                               "%04x, your mileage may vary\n", rev_id);
++                      /* maybe should abort ? */
++              }
++              break;
++      case 0x3600:
++      case 0x3700:
++      default:
++              dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
++                      dev_id);
++              return 0;
++      }
++
++      dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
++               "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
++               glamo_pll_rate(glamo, GLAMO_PLL1),
++               glamo_pll_rate(glamo, GLAMO_PLL2));
++
++      return 1;
++}
++
++static int __init glamo_probe(struct platform_device *pdev)
++{
++      int rc = 0, irq;
++      struct glamo_core *glamo;
++      struct platform_device *glamo_mmc_dev;
++
++      if (glamo_handle) {
++              dev_err(&pdev->dev,
++                      "This driver supports only one instance\n");
++              return -EBUSY;
++      }
++
++      glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
++      if (!glamo)
++              return -ENOMEM;
++
++      spin_lock_init(&glamo->lock);
++      glamo_handle = glamo;
++      glamo->pdev = pdev;
++      glamo->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      glamo->irq = platform_get_irq(pdev, 0);
++      glamo->pdata = pdev->dev.platform_data;
++      if (!glamo->mem || !glamo->pdata) {
++              dev_err(&pdev->dev, "platform device with no MEM/PDATA ?\n");
++              rc = -ENOENT;
++              goto bail_free;
++      }
++
++      /* register a number of sibling devices whoise IOMEM resources
++       * are siblings of pdev's IOMEM resource */
++#if 0
++      glamo_core_dev.dev.parent = &pdev.dev;
++      mangle_mem_resources(glamo_core_dev.resources,
++                           glamo_core_dev.num_resources, glamo->mem);
++      glamo_core_dev.resources[1].start = glamo->irq;
++      glamo_core_dev.resources[1].end = glamo->irq;
++      platform_device_register(&glamo_core_dev);
++#endif
++      /* only remap the generic, hostbus and memory controller registers */
++      glamo->base = ioremap(glamo->mem->start, 0x4000 /*GLAMO_REGOFS_VIDCAP*/);
++      if (!glamo->base) {
++              dev_err(&pdev->dev, "failed to ioremap() memory region\n");
++              goto bail_free;
++      }
++
++      platform_set_drvdata(pdev, glamo);
++
++      (glamo->pdata->glamo_external_reset)(0);
++      udelay(10);
++      (glamo->pdata->glamo_external_reset)(1);
++      mdelay(10);
++
++      /*
++       * finally set the mfd interrupts up
++       * can't do them earlier or sibling probes blow up
++       */
++
++      for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
++              set_irq_chip(irq, &glamo_irq_chip);
++              set_irq_handler(irq, handle_level_irq);
++              set_irq_flags(irq, IRQF_VALID);
++      }
++
++      if (glamo->pdata->glamo_irq_is_wired &&
++          !glamo->pdata->glamo_irq_is_wired()) {
++              set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
++              set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
++              dev_info(&pdev->dev, "Glamo interrupt registered\n");
++              glamo->irq_works = 1;
++      } else {
++              dev_err(&pdev->dev, "Glamo interrupt not used\n");
++              glamo->irq_works = 0;
++      }
++
++
++      /* confirm it isn't insane version */
++      if (!glamo_supported(glamo)) {
++              dev_err(&pdev->dev, "This Glamo is not supported\n");
++              goto bail_irq;
++      }
++
++      /* sysfs */
++      rc = sysfs_create_group(&pdev->dev.kobj, &glamo_attr_group);
++      if (rc < 0) {
++              dev_err(&pdev->dev, "cannot create sysfs group\n");
++              goto bail_irq;
++      }
++
++      /* init the chip with canned register set */
++
++      dev_dbg(&glamo->pdev->dev, "running init script\n");
++      glamo_run_script(glamo, glamo_init_script,
++                       ARRAY_SIZE(glamo_init_script), 1);
++
++      dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
++               glamo_pll_rate(glamo, GLAMO_PLL1),
++               glamo_pll_rate(glamo, GLAMO_PLL2));
++
++      /* bring MCI specific stuff over from our MFD platform data */
++      glamo_mci_def_pdata.glamo_can_set_mci_power =
++                                      glamo->pdata->glamo_can_set_mci_power;
++      glamo_mci_def_pdata.glamo_mci_use_slow =
++                                      glamo->pdata->glamo_mci_use_slow;
++      glamo_mci_def_pdata.glamo_irq_is_wired =
++                                      glamo->pdata->glamo_irq_is_wired;
++
++      /* start creating the siblings */
++
++      glamo_2d_dev.dev.parent = &pdev->dev;
++      mangle_mem_resources(glamo_2d_dev.resource,
++                           glamo_2d_dev.num_resources, glamo->mem);
++      platform_device_register(&glamo_2d_dev);
++
++      glamo_3d_dev.dev.parent = &pdev->dev;
++      mangle_mem_resources(glamo_3d_dev.resource,
++                           glamo_3d_dev.num_resources, glamo->mem);
++      platform_device_register(&glamo_3d_dev);
++
++      glamo_jpeg_dev.dev.parent = &pdev->dev;
++      mangle_mem_resources(glamo_jpeg_dev.resource,
++                           glamo_jpeg_dev.num_resources, glamo->mem);
++      platform_device_register(&glamo_jpeg_dev);
++
++      glamo_mpeg_dev.dev.parent = &pdev->dev;
++      mangle_mem_resources(glamo_mpeg_dev.resource,
++                           glamo_mpeg_dev.num_resources, glamo->mem);
++      platform_device_register(&glamo_mpeg_dev);
++
++      glamo->pdata->glamo = glamo;
++      glamo_fb_dev.dev.parent = &pdev->dev;
++      glamo_fb_dev.dev.platform_data = glamo->pdata;
++      mangle_mem_resources(glamo_fb_dev.resource,
++                           glamo_fb_dev.num_resources, glamo->mem);
++      platform_device_register(&glamo_fb_dev);
++
++      glamo->pdata->spigpio_info->glamo = glamo;
++      glamo_spigpio_dev.dev.parent = &pdev->dev;
++      glamo_spigpio_dev.dev.platform_data = glamo->pdata->spigpio_info;
++      platform_device_register(&glamo_spigpio_dev);
++
++      glamo_mmc_dev = glamo->pdata->mmc_dev;
++      glamo_mmc_dev->name = "glamo-mci";
++      glamo_mmc_dev->dev.parent = &pdev->dev;
++      glamo_mmc_dev->resource = glamo_mmc_resources;
++      glamo_mmc_dev->num_resources = ARRAY_SIZE(glamo_mmc_resources); 
++
++      /* we need it later to give to the engine enable and disable */
++      glamo_mci_def_pdata.pglamo = glamo;
++      mangle_mem_resources(glamo_mmc_dev->resource,
++                           glamo_mmc_dev->num_resources, glamo->mem);
++      platform_device_register(glamo_mmc_dev);
++
++      /* only request the generic, hostbus and memory controller MMIO */
++      glamo->mem = request_mem_region(glamo->mem->start,
++                                      GLAMO_REGOFS_VIDCAP, "glamo-core");
++      if (!glamo->mem) {
++              dev_err(&pdev->dev, "failed to request memory region\n");
++              goto bail_irq;
++      }
++
++      return 0;
++
++bail_irq:
++      disable_irq(glamo->irq);
++      set_irq_chained_handler(glamo->irq, NULL);
++
++      for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
++              set_irq_flags(irq, 0);
++              set_irq_chip(irq, NULL);
++      }
++
++      iounmap(glamo->base);
++bail_free:
++      platform_set_drvdata(pdev, NULL);
++      glamo_handle = NULL;
++      kfree(glamo);
++
++      return rc;
++}
++
++static int glamo_remove(struct platform_device *pdev)
++{
++      struct glamo_core *glamo = platform_get_drvdata(pdev);
++      int irq;
++
++      disable_irq(glamo->irq);
++      set_irq_chained_handler(glamo->irq, NULL);
++
++      for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
++              set_irq_flags(irq, 0);
++              set_irq_chip(irq, NULL);
++      }
++
++      platform_set_drvdata(pdev, NULL);
++      platform_device_unregister(&glamo_fb_dev);
++      platform_device_unregister(glamo->pdata->mmc_dev);
++      iounmap(glamo->base);
++      release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
++      glamo_handle = NULL;
++      kfree(glamo);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int glamo_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      glamo_handle->suspending = 1;
++      glamo_power(glamo_handle, GLAMO_POWER_SUSPEND);
++
++      return 0;
++}
++
++static int glamo_resume(struct platform_device *pdev)
++{
++      glamo_power(glamo_handle, GLAMO_POWER_ON);
++      glamo_handle->suspending = 0;
++
++      return 0;
++}
++
++#else
++#define glamo_suspend NULL
++#define glamo_resume  NULL
++#endif
++
++static struct platform_driver glamo_driver = {
++      .probe          = glamo_probe,
++      .remove         = glamo_remove,
++      .suspend        = glamo_suspend,
++      .resume = glamo_resume,
++      .driver         = {
++              .name   = "glamo3362",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __devinit glamo_init(void)
++{
++      return platform_driver_register(&glamo_driver);
++}
++
++static void __exit glamo_cleanup(void)
++{
++      platform_driver_unregister(&glamo_driver);
++}
++
++module_init(glamo_init);
++module_exit(glamo_cleanup);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-core.h linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-core.h
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-core.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-core.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,92 @@
++#ifndef __GLAMO_CORE_H
++#define __GLAMO_CORE_H
++
++#include <asm/system.h>
++
++/* for the time being, we put the on-screen framebuffer into the lowest
++ * VRAM space.  This should make the code easily compatible with the various
++ * 2MB/4MB/8MB variants of the Smedia chips */
++#define GLAMO_OFFSET_VRAM     0x800000
++#define GLAMO_OFFSET_FB       (GLAMO_OFFSET_VRAM)
++
++/* we only allocate the minimum possible size for the framebuffer to make
++ * sure we have sufficient memory for other functions of the chip */
++//#define GLAMO_FB_SIZE       (640*480*4)     /* == 0x12c000 */
++#define GLAMO_INTERNAL_RAM_SIZE 0x800000
++#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
++#define GLAMO_FB_SIZE (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
++
++struct glamo_core {
++      int irq;
++      int irq_works; /* 0 means PCB does not support Glamo IRQ */
++      struct resource *mem;
++      struct resource *mem_core;
++      void __iomem *base;
++      struct platform_device *pdev;
++      struct glamofb_platform_data *pdata;
++      u_int16_t type;
++      u_int16_t revision;
++      spinlock_t lock;
++      u32 engine_enabled_bitfield;
++      u32 engine_enabled_bitfield_suspend;
++      int suspending;
++};
++
++struct glamo_script {
++      u_int16_t reg;
++      u_int16_t val;
++};
++
++int glamo_run_script(struct glamo_core *glamo,
++                   struct glamo_script *script, int len, int may_sleep);
++
++enum glamo_engine {
++      GLAMO_ENGINE_CAPTURE,
++      GLAMO_ENGINE_ISP,
++      GLAMO_ENGINE_JPEG,
++      GLAMO_ENGINE_MPEG_ENC,
++      GLAMO_ENGINE_MPEG_DEC,
++      GLAMO_ENGINE_LCD,
++      GLAMO_ENGINE_CMDQ,
++      GLAMO_ENGINE_2D,
++      GLAMO_ENGINE_3D,
++      GLAMO_ENGINE_MMC,
++      GLAMO_ENGINE_MICROP0,
++      GLAMO_ENGINE_RISC,
++      GLAMO_ENGINE_MICROP1_MPEG_ENC,
++      GLAMO_ENGINE_MICROP1_MPEG_DEC,
++#if 0
++      GLAMO_ENGINE_H264_DEC,
++      GLAMO_ENGINE_RISC1,
++      GLAMO_ENGINE_SPI,
++#endif
++      __NUM_GLAMO_ENGINES
++};
++
++struct glamo_mci_pdata {
++      struct glamo_core * pglamo;
++      unsigned int    gpio_detect;
++      unsigned int    gpio_wprotect;
++      unsigned long   ocr_avail;
++      int             (*glamo_can_set_mci_power)(void);
++      /* glamo-mci asking if it should use the slow clock to card */
++      int             (*glamo_mci_use_slow)(void);
++      int             (*glamo_irq_is_wired)(void);
++      void            (*mci_suspending)(struct platform_device *dev);
++      int             (*mci_all_dependencies_resumed)(struct platform_device *dev);
++
++};
++
++int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
++int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
++void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
++int glamo_engine_reclock(struct glamo_core *glamo,
++                       enum glamo_engine engine, int ps);
++
++void glamo_engine_clkreg_set(struct glamo_core *glamo,
++                           enum glamo_engine engine,
++                           u_int16_t mask, u_int16_t val);
++
++u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
++                                enum glamo_engine engine);
++#endif /* __GLAMO_CORE_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-fb.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-fb.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-fb.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-fb.c      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,1193 @@
++/* Smedia Glamo 336x/337x driver
++ *
++ * (C) 2007-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/vmalloc.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/wait.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/spinlock.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++
++#include <asm/div64.h>
++
++#ifdef CONFIG_PM
++#include <linux/pm.h>
++#endif
++
++#include <linux/glamofb.h>
++
++#include "glamo-regs.h"
++#include "glamo-core.h"
++
++#ifndef DEBUG
++#define GLAMO_LOG(...)
++#else
++#define GLAMO_LOG(...) \
++do { \
++      printk(KERN_DEBUG "in %s:%s:%d", __FILE__, __func__, __LINE__); \
++      printk(KERN_DEBUG __VA_ARGS__); \
++} while (0);
++#endif
++
++
++#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
++
++struct glamofb_handle {
++      struct fb_info *fb;
++      struct device *dev;
++      struct resource *reg;
++      struct resource *fb_res;
++      char __iomem *base;
++      struct glamofb_platform_data *mach_info;
++      char __iomem *cursor_addr;
++      int cursor_on;
++      u_int32_t pseudo_pal[16];
++      spinlock_t lock_cmd;
++      int angle;      /* Current rotation angle */
++      int blank_mode;
++};
++
++/* 'sibling' spi device for lcm init */
++static struct platform_device glamo_spi_dev = {
++      .name           = "glamo-lcm-spi",
++};
++
++
++static int reg_read(struct glamofb_handle *glamo,
++                         u_int16_t reg)
++{
++      int i = 0;
++
++      for (i = 0; i != 2; i++)
++              nop();
++
++      return readw(glamo->base + reg);
++}
++
++static void reg_write(struct glamofb_handle *glamo,
++                           u_int16_t reg, u_int16_t val)
++{
++      int i = 0;
++
++      for (i = 0; i != 2; i++)
++              nop();
++
++      writew(val, glamo->base + reg);
++}
++
++static struct glamo_script glamo_regs[] = {
++      { GLAMO_REG_LCD_MODE1, 0x0020 },
++      /* no display rotation, no hardware cursor, no dither, no gamma,
++       * no retrace flip, vsync low-active, hsync low active,
++       * no TVCLK, no partial display, hw dest color from fb,
++       * no partial display mode, LCD1, software flip,  */
++      { GLAMO_REG_LCD_MODE2, 0x9020 },
++        /* video flip, no ptr, no ptr, dhclk off,
++         * normal mode,  no cpuif,
++         * res, serial msb first, single fb, no fr ctrl,
++         * cpu if bits all zero, no crc
++         * 0000 0000 0010  0000 */
++      { GLAMO_REG_LCD_MODE3, 0x0b40 },
++        /* src data rgb565, res, 18bit rgb666
++         * 000 01 011 0100 0000 */
++      { GLAMO_REG_LCD_POLARITY, 0x440c },
++        /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
++         * np cpu if, 9bit serial data, sclk rising edge latch data
++         * 01 00 0 100 0 000 01 0 0 */
++      /* The following values assume 640*480@16bpp */
++      { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
++      { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
++      { GLAMO_REG_LCD_B_BASE1, 0x6000 }, /* display B base address 15:0 */
++      { GLAMO_REG_LCD_B_BASE2, 0x0009 }, /* display B base address 22:16 */
++      { GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
++      { GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
++      { GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
++};
++
++static int glamofb_run_script(struct glamofb_handle *glamo,
++                              struct glamo_script *script, int len)
++{
++      int i;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_run_script while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      for (i = 0; i < len; i++) {
++              struct glamo_script *line = &script[i];
++
++              if (line->reg == 0xffff)
++                      return 0;
++              else if (line->reg == 0xfffe)
++                      msleep(line->val);
++              else
++                      reg_write(glamo, script[i].reg, script[i].val);
++      }
++
++      return 0;
++}
++
++static int glamofb_check_var(struct fb_var_screeninfo *var,
++                           struct fb_info *info)
++{
++      struct glamofb_handle *glamo = info->par;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_check_var while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      if (var->yres > glamo->mach_info->yres.max)
++              var->yres = glamo->mach_info->yres.max;
++      else if (var->yres < glamo->mach_info->yres.min)
++              var->yres = glamo->mach_info->yres.min;
++
++      if (var->xres > glamo->mach_info->xres.max)
++              var->xres = glamo->mach_info->xres.max;
++      else if (var->xres < glamo->mach_info->xres.min)
++              var->xres = glamo->mach_info->xres.min;
++
++      if (var->bits_per_pixel > glamo->mach_info->bpp.max)
++              var->bits_per_pixel = glamo->mach_info->bpp.max;
++      else if (var->bits_per_pixel < glamo->mach_info->bpp.min)
++              var->bits_per_pixel = glamo->mach_info->bpp.min;
++
++      /* FIXME: set rgb positions */
++      switch (var->bits_per_pixel) {
++      case 16:
++              switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
++              case GLAMO_LCD_SRC_RGB565:
++                      var->red.offset         = 11;
++                      var->green.offset       = 5;
++                      var->blue.offset        = 0;
++                      var->red.length         = 5;
++                      var->green.length       = 6;
++                      var->blue.length        = 5;
++                      var->transp.length      = 0;
++                      break;
++              case GLAMO_LCD_SRC_ARGB1555:
++                      var->transp.offset      = 15;
++                      var->red.offset         = 10;
++                      var->green.offset       = 5;
++                      var->blue.offset        = 0;
++                      var->transp.length      = 1;
++                      var->red.length         = 5;
++                      var->green.length       = 5;
++                      var->blue.length        = 5;
++                      break;
++              case GLAMO_LCD_SRC_ARGB4444:
++                      var->transp.offset      = 12;
++                      var->red.offset         = 8;
++                      var->green.offset       = 4;
++                      var->blue.offset        = 0;
++                      var->transp.length      = 4;
++                      var->red.length         = 4;
++                      var->green.length       = 4;
++                      var->blue.length        = 4;
++                      break;
++              }
++              break;
++      case 24:
++      case 32:
++      default:
++              /* The Smedia Glamo doesn't support anything but 16bit color */
++              printk(KERN_ERR
++                     "Smedia driver does not [yet?] support 24/32bpp\n");
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++static void reg_set_bit_mask(struct glamofb_handle *glamo,
++                           u_int16_t reg, u_int16_t mask,
++                           u_int16_t val)
++{
++      u_int16_t tmp;
++
++      val &= mask;
++
++      tmp = reg_read(glamo, reg);
++      tmp &= ~mask;
++      tmp |= val;
++      reg_write(glamo, reg, tmp);
++}
++
++#define GLAMO_LCD_WIDTH_MASK 0x03FF
++#define GLAMO_LCD_HEIGHT_MASK 0x03FF
++#define GLAMO_LCD_PITCH_MASK 0x07FE
++#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
++#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
++
++enum orientation {ORIENTATION_PORTRAIT, ORIENTATION_LANDSCAPE};
++
++/* the caller has to enxure lock_cmd is held and we are in cmd mode */
++static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation)
++{
++      int glamo_rot;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING rotate_lcd while "
++                                                               "suspended\n");
++              return;
++      }
++
++      switch (rotation) {
++      case FB_ROTATE_UR:
++              glamo_rot = GLAMO_LCD_ROT_MODE_0;
++              glamo->angle = 0;
++              break;
++      case FB_ROTATE_CW:
++              glamo_rot = GLAMO_LCD_ROT_MODE_90;
++              glamo->angle = 90;
++              break;
++      case FB_ROTATE_UD:
++              glamo_rot = GLAMO_LCD_ROT_MODE_180;
++              glamo->angle = 180;
++              break;
++      case FB_ROTATE_CCW:
++              glamo_rot = GLAMO_LCD_ROT_MODE_270;
++              glamo->angle = 270;
++              break;
++      default:
++              glamo->angle = 0;
++              glamo_rot = GLAMO_LCD_ROT_MODE_0;
++              break;
++      }
++
++      reg_set_bit_mask(glamo,
++                       GLAMO_REG_LCD_WIDTH,
++                       GLAMO_LCD_ROT_MODE_MASK,
++                       glamo_rot);
++      reg_set_bit_mask(glamo,
++                       GLAMO_REG_LCD_MODE1,
++                       GLAMO_LCD_MODE1_ROTATE_EN,
++                       (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
++                               GLAMO_LCD_MODE1_ROTATE_EN : 0);
++}
++
++static enum orientation get_orientation(struct fb_var_screeninfo *var)
++{
++      if (var->xres <= var->yres)
++              return ORIENTATION_PORTRAIT;
++
++      return ORIENTATION_LANDSCAPE;
++}
++
++static int will_orientation_change(struct fb_var_screeninfo *var)
++{
++      enum orientation orient = get_orientation(var);
++
++      switch (orient) {
++      case ORIENTATION_LANDSCAPE:
++              if (var->rotate == FB_ROTATE_UR || var->rotate == FB_ROTATE_UD)
++                      return 1;
++              break;
++      case ORIENTATION_PORTRAIT:
++              if (var->rotate == FB_ROTATE_CW || var->rotate == FB_ROTATE_CCW)
++                      return 1;
++              break;
++      }
++      return 0;
++}
++
++#ifdef CONFIG_MFD_GLAMO_FB_XGLAMO_WORKAROUND
++
++/*
++ * See https://docs.openmoko.org/trac/ticket/2255
++ * We have a hack for some Xglamo bugs in kernel code.
++ * If someone fixes xglamo we can remove this hack.
++ * We might make xglamo_hack_enabled 0 by default in the future.
++ */
++
++static unsigned xglamo_hack_enabled = 1;
++
++static ssize_t xglamo_hack_read(struct device *dev,
++                              struct device_attribute *attr, char *buf)
++{
++      return sprintf(buf, "%d\n", xglamo_hack_enabled);
++}
++
++static ssize_t xglamo_hack_write(struct device *dev,
++                               struct device_attribute *attr, const char *buf,
++                               size_t count)
++{
++      unsigned long val;
++
++      if (!strict_strtoul(buf, 10, &val))
++              xglamo_hack_enabled = !!val;
++
++      return count;
++}
++
++static DEVICE_ATTR(xglamo_hack, S_IWUSR | S_IRUGO, xglamo_hack_read,
++                 xglamo_hack_write);
++
++static struct attribute *glamo_fb_sysfs_entries[] = {
++      &dev_attr_xglamo_hack.attr,
++      NULL
++};
++
++static struct attribute_group glamo_fb_attr_group = {
++      .name           = NULL,
++      .attrs          = glamo_fb_sysfs_entries,
++};
++
++/* This function implements the actual Xglamo hack. */
++
++static void glamofb_update_lcd_controller_hack(struct glamofb_handle *glamo,
++                                             struct fb_var_screeninfo *var,
++                                             int *xres, int *yres, int *pitch)
++{
++      int width, height;
++
++      if (glamo->angle == 90 || glamo->angle == 270) {
++              /*
++               * But if we are going back to portrait mode from here,
++               * we get inverted values from Xglamo
++               */
++              if (!(var->rotate == FB_ROTATE_UR ||
++                              var->rotate == FB_ROTATE_UD)) {
++                      width = var->yres;
++                      height = var->xres;
++              } else {
++                      width = var->xres;
++                      height = var->yres;
++              }
++
++      } else {
++              width = var->xres;
++              height = var->yres;
++      }
++
++      /* Portrait ? */
++      if (var->rotate == FB_ROTATE_UR || var->rotate == FB_ROTATE_UD) {
++              /* We don't need to set xres and yres in this particular case
++               * because Xglamo does it for us */
++              if (!(glamo->angle == 90 || glamo->angle == 270)) {
++                      var->xres = width;
++                      var->yres = height;
++              }
++
++              var->xres_virtual = width;
++              var->yres_virtual = height * 2;
++              *pitch = width * var->bits_per_pixel / 8;
++      } else {
++              var->xres = height;
++              var->yres = width;
++              var->xres_virtual = height * 2;
++              var->yres_virtual = width;
++              *pitch = height * var->bits_per_pixel / 8;
++      }
++
++      *xres = width;
++      *yres = height;
++}
++#else
++#define xglamo_hack_enabled 0
++static void glamofb_update_lcd_controller_hack(struct glamofb_handle *glamo,
++                                             struct fb_var_screeninfo *var,
++                                             int *xres, int *yres, int *pitch)
++{
++}
++#endif
++
++static void glamofb_update_lcd_controller(struct glamofb_handle *glamo,
++                                        struct fb_var_screeninfo *var)
++{
++      int sync, bp, disp, fp, total, xres, yres, pitch;
++      int uninitialized_var(orientation_changing);
++      unsigned long flags;
++
++      if (!glamo || !var)
++              return;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_update_lcd_controller while "
++                                                               "suspended\n");
++              return;
++      }
++
++      dev_dbg(&glamo->mach_info->glamo->pdev->dev,
++                        "glamofb_update_lcd_controller spin_lock_irqsave\n");
++      spin_lock_irqsave(&glamo->lock_cmd, flags);
++
++      if (glamofb_cmd_mode(glamo, 1))
++              goto out_unlock;
++
++      if (var->pixclock)
++              glamo_engine_reclock(glamo->mach_info->glamo,
++                                   GLAMO_ENGINE_LCD,
++                                   var->pixclock);
++
++      if (xglamo_hack_enabled) {
++              glamofb_update_lcd_controller_hack(glamo, var, &xres, &yres,
++                                                 &pitch);
++      } else {
++              xres = var->xres;
++              yres = var->yres;
++
++              orientation_changing = will_orientation_change(var);
++              /* Adjust the pitch according to new orientation to come. */
++              if (orientation_changing)
++                      pitch = var->yres * var->bits_per_pixel / 8;
++              else
++                      pitch = var->xres * var->bits_per_pixel / 8;
++      }
++
++      reg_set_bit_mask(glamo,
++                       GLAMO_REG_LCD_WIDTH,
++                       GLAMO_LCD_WIDTH_MASK,
++                       xres);
++      reg_set_bit_mask(glamo,
++                       GLAMO_REG_LCD_HEIGHT,
++                       GLAMO_LCD_HEIGHT_MASK,
++                       yres);
++      reg_set_bit_mask(glamo,
++                       GLAMO_REG_LCD_PITCH,
++                       GLAMO_LCD_PITCH_MASK,
++                       pitch);
++
++      /* honour the rotation request */
++      __rotate_lcd(glamo, var->rotate);
++
++      if (!xglamo_hack_enabled) {
++              /* update the reported geometry of the framebuffer. */
++              if (orientation_changing) {
++                      var->xres_virtual = yres;
++                      var->xres = yres;
++                      var->xres_virtual *= 2;
++                      var->yres_virtual = xres;
++                      var->yres = xres;
++              } else {
++                      var->xres_virtual = xres;
++                      var->yres_virtual = yres;
++                      var->yres_virtual *= 2;
++              }
++      }
++
++      /* update scannout timings */
++      sync = 0;
++      bp = sync + var->hsync_len;
++      disp = bp + var->left_margin;
++      fp = disp + xres;
++      total = fp + var->right_margin;
++
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_TOTAL,
++                       GLAMO_LCD_HV_TOTAL_MASK, total);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_START,
++                       GLAMO_LCD_HV_RETR_START_MASK, sync);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_END,
++                       GLAMO_LCD_HV_RETR_END_MASK, bp);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_START,
++                        GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_END,
++                       GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
++
++      sync = 0;
++      bp = sync + var->vsync_len;
++      disp = bp + var->upper_margin;
++      fp = disp + yres;
++      total = fp + var->lower_margin;
++
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_TOTAL,
++                       GLAMO_LCD_HV_TOTAL_MASK, total);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_START,
++                        GLAMO_LCD_HV_RETR_START_MASK, sync);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_END,
++                       GLAMO_LCD_HV_RETR_END_MASK, bp);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_START,
++                       GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_END,
++                       GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
++
++      glamofb_cmd_mode(glamo, 0);
++
++out_unlock:
++      dev_dbg(&glamo->mach_info->glamo->pdev->dev,
++                    "glamofb_update_lcd_controller spin_unlock_irqrestore\n");
++      spin_unlock_irqrestore(&glamo->lock_cmd, flags);
++}
++
++static int glamofb_pan_display(struct fb_var_screeninfo *var,
++              struct fb_info *info)
++{
++      struct glamofb_handle *glamo = info->par;
++      u_int16_t page = var->yoffset / glamo->mach_info->yres.defval;
++      reg_write(glamo, GLAMO_REG_LCD_COMMAND2, page);
++
++      return 0;
++}
++
++static int glamofb_set_par(struct fb_info *info)
++{
++      struct glamofb_handle *glamo = info->par;
++      struct fb_var_screeninfo *var = &info->var;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_set_par while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      switch (var->bits_per_pixel) {
++      case 16:
++              info->fix.visual = FB_VISUAL_TRUECOLOR;
++              break;
++      default:
++              printk("Smedia driver doesn't support != 16bpp\n");
++              return -EINVAL;
++      }
++
++      info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
++
++      glamofb_update_lcd_controller(glamo, var);
++
++      return 0;
++}
++
++
++static void notify_blank(struct fb_info *info, int blank_mode)
++{
++      struct fb_event event;
++
++      event.info = info;
++      event.data = &blank_mode;
++      fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
++}
++
++
++static int glamofb_blank(int blank_mode, struct fb_info *info)
++{
++      struct glamofb_handle *gfb = info->par;
++      struct glamo_core *gcore = gfb->mach_info->glamo;
++
++      dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
++
++      switch (blank_mode) {
++      case FB_BLANK_VSYNC_SUSPEND:
++      case FB_BLANK_HSYNC_SUSPEND:
++              /* FIXME: add pdata hook/flag to indicate whether
++               * we should already switch off pixel clock here */
++              break;
++      case FB_BLANK_POWERDOWN:
++              /* Simulating FB_BLANK_NORMAL allow turning off backlight */
++              if (gfb->blank_mode != FB_BLANK_NORMAL)
++                      notify_blank(info, FB_BLANK_NORMAL);
++
++              /* LCM need notification before pixel clock is stopped */
++              notify_blank(info, blank_mode);
++
++              /* disable the pixel clock */
++              glamo_engine_clkreg_set(gcore, GLAMO_ENGINE_LCD,
++                                      GLAMO_CLOCK_LCD_EN_DCLK, 0);
++              gfb->blank_mode = blank_mode;
++              break;
++      case FB_BLANK_UNBLANK:
++      case FB_BLANK_NORMAL:
++              /* enable the pixel clock if off */
++              if (gfb->blank_mode == FB_BLANK_POWERDOWN)
++                      glamo_engine_clkreg_set(gcore,
++                                      GLAMO_ENGINE_LCD,
++                                      GLAMO_CLOCK_LCD_EN_DCLK,
++                                      GLAMO_CLOCK_LCD_EN_DCLK);
++
++              notify_blank(info, blank_mode);
++              gfb->blank_mode = blank_mode;
++              break;
++      }
++
++      /* FIXME: once we have proper clock management in glamo-core,
++       * we can determine if other units need MCLK1 or the PLL, and
++       * disable it if not used. */
++      return 0;
++}
++
++static inline unsigned int chan_to_field(unsigned int chan,
++                                       struct fb_bitfield *bf)
++{
++      chan &= 0xffff;
++      chan >>= 16 - bf->length;
++      return chan << bf->offset;
++}
++
++static int glamofb_setcolreg(unsigned regno,
++                           unsigned red, unsigned green, unsigned blue,
++                           unsigned transp, struct fb_info *info)
++{
++      struct glamofb_handle *glamo = info->par;
++      unsigned int val;
++
++      if (glamo->mach_info->glamo->suspending) {
++              dev_err(&glamo->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_set_par while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      switch (glamo->fb->fix.visual) {
++      case FB_VISUAL_TRUECOLOR:
++      case FB_VISUAL_DIRECTCOLOR:
++              /* true-colour, use pseuo-palette */
++
++              if (regno < 16) {
++                      u32 *pal = glamo->fb->pseudo_palette;
++
++                      val  = chan_to_field(red, &glamo->fb->var.red);
++                      val |= chan_to_field(green, &glamo->fb->var.green);
++                      val |= chan_to_field(blue, &glamo->fb->var.blue);
++
++                      pal[regno] = val;
++              };
++              break;
++      default:
++              return 1; /* unknown type */
++      }
++
++      return 0;
++}
++
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++static inline void glamofb_vsync_wait(struct glamofb_handle *glamo,
++              int line, int size, int range)
++{
++      int count[2];
++
++      do {
++              count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
++              count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
++      } while (count[0] != count[1] ||
++                      (line < count[0] + range &&
++                       size > count[0] - range) ||
++                      count[0] < range * 2);
++}
++
++/*
++ * Enable/disable the hardware cursor mode altogether
++ * (for blinking and such, use glamofb_cursor()).
++ */
++static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
++{
++      int y, size;
++
++      if (glamo->cursor_on) {
++              y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
++              size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
++
++              glamofb_vsync_wait(glamo, y, size, 30);
++      }
++
++      reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
++                      GLAMO_LCD_MODE1_CURSOR_EN,
++                      on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
++      glamo->cursor_on = on;
++
++      /* Hide the cursor by default */
++      reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
++}
++
++static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
++{
++      struct glamofb_handle *glamo = info->par;
++      unsigned long flags;
++
++      spin_lock_irqsave(&glamo->lock_cmd, flags);
++
++      reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
++                      cursor->enable ? cursor->image.width : 0);
++
++      if (cursor->set & FB_CUR_SETPOS) {
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
++                        cursor->image.dx);
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
++                        cursor->image.dy);
++      }
++
++      if (cursor->set & FB_CUR_SETCMAP) {
++              uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
++              uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
++
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
++      }
++
++      if (cursor->set & FB_CUR_SETHOT)
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
++                              (cursor->hot.x << 8) | cursor->hot.y);
++
++      if ((cursor->set & FB_CUR_SETSIZE) ||
++          (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
++              int x, y, pitch, op;
++              const uint8_t *pcol = cursor->image.data;
++              const uint8_t *pmsk = cursor->mask;
++              uint8_t __iomem *dst = glamo->cursor_addr;
++              uint8_t dcol = 0;
++              uint8_t dmsk = 0;
++              uint8_t byte = 0;
++
++              if (cursor->image.depth > 1) {
++                      spin_unlock_irqrestore(&glamo->lock_cmd, flags);
++                      return -EINVAL;
++              }
++
++              pitch = ((cursor->image.width + 7) >> 2) & ~1;
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
++                      pitch);
++              reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
++                      cursor->image.height);
++
++              for (y = 0; y < cursor->image.height; y++) {
++                      byte = 0;
++                      for (x = 0; x < cursor->image.width; x++) {
++                              if ((x % 8) == 0) {
++                                      dcol = *pcol++;
++                                      dmsk = *pmsk++;
++                              } else {
++                                      dcol >>= 1;
++                                      dmsk >>= 1;
++                              }
++
++                              if (cursor->rop == ROP_COPY)
++                                      op = (dmsk & 1) ?
++                                              (dcol & 1) ? 1 : 3 : 0;
++                              else
++                                      op = ((dmsk & 1) << 1) |
++                                              ((dcol & 1) << 0);
++                              byte |= op << ((x & 3) << 1);
++
++                              if (x % 4 == 3) {
++                                      writeb(byte, dst + x / 4);
++                                      byte = 0;
++                              }
++                      }
++                      if (x % 4) {
++                              writeb(byte, dst + x / 4);
++                              byte = 0;
++                      }
++
++                      dst += pitch;
++              }
++      }
++
++      spin_unlock_irqrestore(&glamo->lock_cmd, flags);
++
++      return 0;
++}
++#endif
++
++static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
++{
++      /* DGCMdQempty -- 1 == command queue is empty */
++      return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
++}
++
++/* call holding gfb->lock_cmd  when locking, until you unlock */
++int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
++{
++      int timeout = 2000000;
++
++      if (gfb->mach_info->glamo->suspending) {
++              dev_err(&gfb->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_cmd_mode while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
++      if (on) {
++              dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
++                      __func__);
++              while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
++                      /* yield() */;
++              if (timeout < 0) {
++                      printk(KERN_ERR"*************"
++                                     "glamofb cmd_queue never got empty"
++                                     "*************\n");
++                      return -EIO;
++              }
++              dev_dbg(gfb->dev, "empty!\n");
++
++              /* display the entire frame then switch to command */
++              reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++                        GLAMO_LCD_CMD_TYPE_DISP |
++                        GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
++
++              /* wait until lcd idle */
++              dev_dbg(gfb->dev, "waiting for lcd idle: ");
++              timeout = 2000000;
++              while ((!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
++                    (timeout--))
++                      /* yield() */;
++              if (timeout < 0) {
++                      printk(KERN_ERR"*************"
++                                     "glamofb lcd never idle"
++                                     "*************\n");
++                      return -EIO;
++              }
++
++              mdelay(100);
++
++              dev_dbg(gfb->dev, "cmd mode entered\n");
++
++      } else {
++              /* RGB interface needs vsync/hsync */
++              if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
++                      reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++                                GLAMO_LCD_CMD_TYPE_DISP |
++                                GLAMO_LCD_CMD_DATA_DISP_SYNC);
++
++              reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
++                        GLAMO_LCD_CMD_TYPE_DISP |
++                        GLAMO_LCD_CMD_DATA_DISP_FIRE);
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
++
++
++int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
++{
++      int timeout = 200000;
++
++      if (gfb->mach_info->glamo->suspending) {
++              dev_err(&gfb->mach_info->glamo->pdev->dev,
++                              "IGNORING glamofb_cmd_write while "
++                                                               "suspended\n");
++              return -EBUSY;
++      }
++
++      dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__);
++      while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
++              yield();
++      if (timeout < 0) {
++              printk(KERN_ERR"*************"
++                              "glamofb cmd_queue never got empty"
++                              "*************\n");
++              return 1;
++      }
++      dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
++
++      reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(glamofb_cmd_write);
++
++static struct fb_ops glamofb_ops = {
++      .owner          = THIS_MODULE,
++      .fb_check_var   = glamofb_check_var,
++      .fb_pan_display = glamofb_pan_display,
++      .fb_set_par     = glamofb_set_par,
++      .fb_blank       = glamofb_blank,
++      .fb_setcolreg   = glamofb_setcolreg,
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++      .fb_cursor      = glamofb_cursor,
++#endif
++      .fb_fillrect    = cfb_fillrect,
++      .fb_copyarea    = cfb_copyarea,
++      .fb_imageblit   = cfb_imageblit,
++};
++
++static int glamofb_init_regs(struct glamofb_handle *glamo)
++{
++      struct fb_info *info = glamo->fb;
++
++      glamofb_check_var(&info->var, info);
++      glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
++      glamofb_set_par(info);
++
++      return 0;
++}
++
++static int __init glamofb_probe(struct platform_device *pdev)
++{
++      int rc = -EIO;
++      struct fb_info *fbinfo;
++      struct glamofb_handle *glamofb;
++      struct glamofb_platform_data *mach_info = pdev->dev.platform_data;
++
++      printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
++              "Openmoko, Inc.\n");
++
++      fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
++      if (!fbinfo)
++              return -ENOMEM;
++
++      glamofb = fbinfo->par;
++      glamofb->fb = fbinfo;
++      glamofb->dev = &pdev->dev;
++
++      glamofb->angle = 0;
++      glamofb->blank_mode = FB_BLANK_POWERDOWN;
++
++      strcpy(fbinfo->fix.id, "SMedia Glamo");
++
++      glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++                                                  "glamo-fb-regs");
++      if (!glamofb->reg) {
++              dev_err(&pdev->dev, "platform device with no registers?\n");
++              rc = -ENOENT;
++              goto out_free;
++      }
++
++      glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++                                                      "glamo-fb-mem");
++      if (!glamofb->fb_res) {
++              dev_err(&pdev->dev, "platform device with no memory ?\n");
++              rc = -ENOENT;
++              goto out_free;
++      }
++
++      glamofb->reg = request_mem_region(glamofb->reg->start,
++                                        RESSIZE(glamofb->reg), pdev->name);
++      if (!glamofb->reg) {
++              dev_err(&pdev->dev, "failed to request mmio region\n");
++              goto out_free;
++      }
++
++      glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
++                                           mach_info->fb_mem_size,
++                                           pdev->name);
++      if (!glamofb->fb_res) {
++              dev_err(&pdev->dev, "failed to request vram region\n");
++              goto out_release_reg;
++      }
++
++      /* we want to remap only the registers required for this core
++       * driver. */
++      glamofb->base = ioremap(glamofb->reg->start, RESSIZE(glamofb->reg));
++      if (!glamofb->base) {
++              dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
++              goto out_release_fb;
++      }
++      fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
++      fbinfo->fix.smem_len = mach_info->fb_mem_size;
++
++      fbinfo->screen_base = ioremap(glamofb->fb_res->start,
++                                     RESSIZE(glamofb->fb_res));
++      if (!fbinfo->screen_base) {
++              dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
++              goto out_release_fb;
++      }
++      glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
++
++      platform_set_drvdata(pdev, glamofb);
++
++      glamofb->mach_info = pdev->dev.platform_data;
++
++      fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
++      fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
++      fbinfo->fix.type_aux = 0;
++      fbinfo->fix.xpanstep = 0;
++      fbinfo->fix.ypanstep = mach_info->yres.defval;
++      fbinfo->fix.ywrapstep = 0;
++      fbinfo->fix.accel = FB_ACCEL_GLAMO;
++
++      fbinfo->var.nonstd = 0;
++      fbinfo->var.activate = FB_ACTIVATE_NOW;
++      fbinfo->var.height = mach_info->height;
++      fbinfo->var.width = mach_info->width;
++      fbinfo->var.accel_flags = 0;    /* FIXME */
++      fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
++
++      fbinfo->fbops = &glamofb_ops;
++      fbinfo->flags = FBINFO_FLAG_DEFAULT;
++      fbinfo->pseudo_palette = &glamofb->pseudo_pal;
++
++      fbinfo->var.xres = mach_info->xres.defval;
++      fbinfo->var.xres_virtual = mach_info->xres.defval;
++      fbinfo->var.yres = mach_info->yres.defval;
++      fbinfo->var.yres_virtual = mach_info->yres.defval * 2;
++      fbinfo->var.bits_per_pixel = mach_info->bpp.defval;
++
++      fbinfo->var.pixclock = mach_info->pixclock;
++      fbinfo->var.left_margin = mach_info->left_margin;
++      fbinfo->var.right_margin = mach_info->right_margin;
++      fbinfo->var.upper_margin = mach_info->upper_margin;
++      fbinfo->var.lower_margin = mach_info->lower_margin;
++      fbinfo->var.hsync_len = mach_info->hsync_len;
++      fbinfo->var.vsync_len = mach_info->vsync_len;
++
++      memset(fbinfo->screen_base, 0,
++                      mach_info->xres.max *
++                      mach_info->yres.max *
++                      mach_info->bpp.max / 8);
++
++      glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
++      glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
++
++      dev_info(&pdev->dev, "spin_lock_init\n");
++      spin_lock_init(&glamofb->lock_cmd);
++      glamofb_init_regs(glamofb);
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++      glamofb_cursor_onoff(glamofb, 1);
++#endif
++
++#ifdef CONFIG_MFD_GLAMO_FB_XGLAMO_WORKAROUND
++      /* sysfs */
++      rc = sysfs_create_group(&pdev->dev.kobj, &glamo_fb_attr_group);
++      if (rc < 0) {
++              dev_err(&pdev->dev, "cannot create sysfs group\n");
++              goto out_unmap_fb;
++      }
++#endif
++
++      rc = register_framebuffer(fbinfo);
++      if (rc < 0) {
++              dev_err(&pdev->dev, "failed to register framebuffer\n");
++              goto out_unmap_fb;
++      }
++
++      if (mach_info->spi_info) {
++              /* register the sibling spi device */
++              mach_info->spi_info->glamofb_handle = glamofb;
++              glamo_spi_dev.dev.parent = &pdev->dev;
++              glamo_spi_dev.dev.platform_data = mach_info->spi_info;
++              platform_device_register(&glamo_spi_dev);
++      }
++
++      printk(KERN_INFO "fb%d: %s frame buffer device\n",
++              fbinfo->node, fbinfo->fix.id);
++
++      return 0;
++
++out_unmap_fb:
++      iounmap(fbinfo->screen_base);
++      iounmap(glamofb->base);
++out_release_fb:
++      release_mem_region(glamofb->fb_res->start, RESSIZE(glamofb->fb_res));
++out_release_reg:
++      release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
++out_free:
++      framebuffer_release(fbinfo);
++      return rc;
++}
++
++static int glamofb_remove(struct platform_device *pdev)
++{
++      struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
++
++      platform_set_drvdata(pdev, NULL);
++      iounmap(glamofb->base);
++      release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
++      kfree(glamofb);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int glamofb_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct glamofb_handle *gfb = platform_get_drvdata(pdev);
++
++      /* we need to stop anything touching our framebuffer */
++      fb_set_suspend(gfb->fb, 1);
++
++      /* seriously -- nobody is allowed to touch glamo memory when we
++       * are suspended or we lock on nWAIT
++       */
++      /* iounmap(gfb->fb->screen_base); */
++
++      return 0;
++}
++
++static int glamofb_resume(struct platform_device *pdev)
++{
++      struct glamofb_handle *gfb = platform_get_drvdata(pdev);
++      struct glamofb_platform_data *mach_info = pdev->dev.platform_data;
++
++      /* OK let's allow framebuffer ops again */
++      /* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
++                                     RESSIZE(gfb->fb_res)); */
++      glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
++      glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
++
++      printk(KERN_ERR"spin_lock_init\n");
++      spin_lock_init(&gfb->lock_cmd);
++      glamofb_init_regs(gfb);
++#ifdef CONFIG_MFD_GLAMO_HWACCEL
++      glamofb_cursor_onoff(gfb, 1);
++#endif
++
++      fb_set_suspend(gfb->fb, 0);
++
++      return 0;
++}
++#else
++#define glamofb_suspend NULL
++#define glamofb_resume  NULL
++#endif
++
++static struct platform_driver glamofb_driver = {
++      .probe          = glamofb_probe,
++      .remove         = glamofb_remove,
++      .suspend        = glamofb_suspend,
++      .resume = glamofb_resume,
++      .driver         = {
++              .name   = "glamo-fb",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __devinit glamofb_init(void)
++{
++      return platform_driver_register(&glamofb_driver);
++}
++
++static void __exit glamofb_cleanup(void)
++{
++      platform_driver_unregister(&glamofb_driver);
++}
++
++module_init(glamofb_init);
++module_exit(glamofb_cleanup);
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-gpio.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-gpio.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-gpio.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-gpio.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,62 @@
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/io.h>
++
++#include <linux/glamo-gpio.h>
++
++#include "glamo-core.h"
++#include "glamo-regs.h"
++
++void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
++                     unsigned int value)
++{
++      unsigned int reg = REG_OF_GPIO(pin);
++      u_int16_t tmp;
++
++      spin_lock(&glamo->lock);
++      tmp = readw(glamo->base + reg);
++      if (value)
++              tmp |= OUTPUT_BIT(pin);
++      else
++              tmp &= ~OUTPUT_BIT(pin);
++      writew(tmp, glamo->base + reg);
++      spin_unlock(&glamo->lock);
++}
++EXPORT_SYMBOL(glamo_gpio_setpin);
++
++int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin)
++{
++      return readw(REG_OF_GPIO(pin)) & INPUT_BIT(pin) ? 1 : 0;
++}
++EXPORT_SYMBOL(glamo_gpio_getpin);
++
++void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc)
++{
++      unsigned int reg = REG_OF_GPIO(pinfunc);
++      u_int16_t tmp;
++
++      spin_lock(&glamo->lock);
++      tmp = readw(glamo->base + reg);
++
++      if ((pinfunc & 0x00f0) == GLAMO_GPIO_F_FUNC) {
++              /* pin is a function pin: clear gpio bit */
++              tmp &= ~FUNC_BIT(pinfunc);
++      } else {
++              /* pin is gpio: set gpio bit */
++              tmp |= FUNC_BIT(pinfunc);
++
++              if (pinfunc & GLAMO_GPIO_F_IN) {
++                      /* gpio input: set bit to disable output mode */
++                      tmp |= GPIO_OUT_BIT(pinfunc);
++              } else if (pinfunc & GLAMO_GPIO_F_OUT) {
++                      /* gpio output: clear bit to enable output mode */
++                      tmp &= ~GPIO_OUT_BIT(pinfunc);
++              }
++      }
++      writew(tmp, glamo->base + reg);
++      spin_unlock(&glamo->lock);
++}
++EXPORT_SYMBOL(glamo_gpio_cfgpin);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-lcm-spi.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-lcm-spi.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-lcm-spi.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-lcm-spi.c 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,240 @@
++/*
++ * Copyright (C) 2007 Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * Smedia Glamo GPIO based SPI driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This driver currently only implements a minimum subset of the hardware
++ * features, esp. those features that are required to drive the jbt6k74
++ * LCM controller asic in the TD028TTEC1 LCM.
++ *
++*/
++
++#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/glamo.h>
++
++#include <linux/glamofb.h>
++
++#include <mach/hardware.h>
++
++#include "glamo-core.h"
++#include "glamo-regs.h"
++
++struct glamo_spi {
++      struct spi_bitbang      bitbang;
++      struct spi_master       *master;
++      struct glamo_spi_info   *info;
++      struct device           *dev;
++};
++
++static inline struct glamo_spi *to_gs(struct spi_device *spi)
++{
++      return spi->controller_data;
++}
++
++static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
++{
++      unsigned int bpw;
++
++      bpw = t ? t->bits_per_word : spi->bits_per_word;
++
++      if (bpw != 9 && bpw != 8) {
++              dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++static void glamo_spi_chipsel(struct spi_device *spi, int value)
++{
++#if 0
++      struct glamo_spi *gs = to_gs(spi);
++
++      dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
++              value, spi, gs, gs->info, gs->info->glamofb_handle);
++
++      glamofb_cmd_mode(gs->info->glamofb_handle, value);
++#endif
++}
++
++static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
++{
++      struct glamo_spi *gs = to_gs(spi);
++      const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf;
++      u_int16_t nine_bits;
++      int i;
++
++      dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n",
++              t->tx_buf, t->rx_buf, t->bits_per_word, t->len);
++
++      if (spi->bits_per_word == 9)
++              nine_bits = (1 << 9);
++      else
++              nine_bits = 0;
++
++      if (t->len > 3 * sizeof(u_int16_t)) {
++              dev_err(&spi->dev, "this driver doesn't support "
++                      "%u sized xfers\n", t->len);
++              return -EINVAL;
++      }
++
++      for (i = 0; i < t->len/sizeof(u_int16_t); i++) {
++              /* actually transfer the data */
++#if 1
++              glamofb_cmd_write(gs->info->glamofb_handle,
++                                GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits |
++                                (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff));
++#endif
++              /* FIXME: fire ?!? */
++              if (i == 0 && (ui16[i] & 0x1ff) == 0x29) {
++                      dev_dbg(&spi->dev, "leaving command mode\n");
++                      glamofb_cmd_mode(gs->info->glamofb_handle, 0);
++              }
++      }
++
++      return t->len;
++}
++
++static int glamo_spi_setup(struct spi_device *spi)
++{
++      int ret;
++
++      if (!spi->bits_per_word)
++              spi->bits_per_word = 9;
++
++      /* FIXME: hardware can do this */
++      if (spi->mode & SPI_LSB_FIRST)
++              return -EINVAL;
++
++      ret = glamo_spi_setupxfer(spi, NULL);
++      if (ret < 0) {
++              dev_err(&spi->dev, "setupxfer returned %d\n", ret);
++              return ret;
++      }
++
++      dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n",
++              __FUNCTION__, spi->mode, spi->bits_per_word);
++
++      return 0;
++}
++
++static int glamo_spi_probe(struct platform_device *pdev)
++{
++      struct spi_master *master;
++      struct glamo_spi *sp;
++      int ret;
++      int i;
++
++      master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi));
++      if (master == NULL) {
++              dev_err(&pdev->dev, "failed to allocate spi master\n");
++              ret = -ENOMEM;
++              goto err;
++      }
++
++      sp = spi_master_get_devdata(master);
++      memset(sp, 0, sizeof(struct glamo_spi));
++
++      sp->master = spi_master_get(master);
++      sp->info = pdev->dev.platform_data;
++      if (!sp->info) {
++              dev_err(&pdev->dev, "can't operate without platform data\n");
++              ret = -EIO;
++              goto err_no_pdev;
++      }
++      dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info);
++
++      sp->dev = &pdev->dev;
++
++      platform_set_drvdata(pdev, sp);
++
++      sp->bitbang.master = sp->master;
++      sp->bitbang.setup_transfer = glamo_spi_setupxfer;
++      sp->bitbang.chipselect = glamo_spi_chipsel;
++      sp->bitbang.txrx_bufs = glamo_spi_txrx;
++      sp->bitbang.master->setup = glamo_spi_setup;
++
++      ret = spi_bitbang_start(&sp->bitbang);
++      if (ret)
++              goto err_no_bitbang;
++
++      /* register the chips to go with the board */
++
++      glamofb_cmd_mode(sp->info->glamofb_handle, 1);
++
++      for (i = 0; i < sp->info->board_size; i++) {
++              dev_info(&pdev->dev, "registering %p: %s\n",
++                       &sp->info->board_info[i],
++                       sp->info->board_info[i].modalias);
++
++              sp->info->board_info[i].controller_data = sp;
++              spi_new_device(master, sp->info->board_info + i);
++      }
++
++      return 0;
++
++err_no_bitbang:
++      platform_set_drvdata(pdev, NULL);
++err_no_pdev:
++      spi_master_put(sp->bitbang.master);
++err:
++      return ret;
++
++}
++
++static int glamo_spi_remove(struct platform_device *pdev)
++{
++      struct glamo_spi *sp = platform_get_drvdata(pdev);
++
++      spi_bitbang_stop(&sp->bitbang);
++      spi_master_put(sp->bitbang.master);
++
++      return 0;
++}
++
++#define glamo_spi_suspend NULL
++#define glamo_spi_resume NULL
++
++static struct platform_driver glamo_spi_drv = {
++      .probe          = glamo_spi_probe,
++      .remove         = glamo_spi_remove,
++      .suspend        = glamo_spi_suspend,
++      .resume         = glamo_spi_resume,
++      .driver         = {
++              .name   = "glamo-lcm-spi",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init glamo_spi_init(void)
++{
++      return platform_driver_register(&glamo_spi_drv);
++}
++
++static void __exit glamo_spi_exit(void)
++{
++      platform_driver_unregister(&glamo_spi_drv);
++}
++
++module_init(glamo_spi_init);
++module_exit(glamo_spi_exit);
++
++MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-mci.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-mci.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-mci.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-mci.c     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,1168 @@
++/*
++ *  linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
++ *
++ *  Copyright (C) 2007 Openmoko, Inc,  Andy Green <andy@openmoko.com>
++ *  Based on S3C MMC driver that was:
++ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/pcf50633.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++
++#include <asm/dma.h>
++#include <asm/dma-mapping.h>
++#include <asm/io.h>
++
++#include "glamo-mci.h"
++#include "glamo-core.h"
++#include "glamo-regs.h"
++
++/* from glamo-core.c */
++extern struct glamo_mci_pdata glamo_mci_def_pdata;
++
++static spinlock_t clock_lock;
++
++#define DRIVER_NAME "glamo-mci"
++#define RESSIZE(ressource) (((ressource)->end - (ressource)->start) + 1)
++
++static void glamo_mci_send_request(struct mmc_host *mmc);
++
++/*
++ * Max SD clock rate
++ *
++ * held at /(3 + 1) due to concerns of 100R recommended series resistor
++ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_max_clk=10000000
++ *
++ * for example
++ */
++
++static int sd_max_clk = 50000000 / 3;
++module_param(sd_max_clk, int, 0644);
++
++/*
++ * Slow SD clock rate
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_slow_ratio=8
++ *
++ * for example
++ *
++ * platform callback is used to decide effective clock rate, if not
++ * defined then max is used, if defined and returns nonzero, rate is
++ * divided by this factor
++ */
++
++static int sd_slow_ratio = 8;
++module_param(sd_slow_ratio, int, 0644);
++
++/*
++ * Post-power SD clock rate
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_post_power_clock=1000000
++ *
++ * for example
++ *
++ * After changing power to card, clock is held at this rate until first bulk
++ * transfer completes
++ */
++
++static int sd_post_power_clock = 1000000;
++module_param(sd_post_power_clock, int, 0644);
++
++
++/*
++ * SD Signal drive strength
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_drive=0
++ *
++ * for example
++ */
++
++static int sd_drive;
++module_param(sd_drive, int, 0644);
++
++/*
++ * SD allow SD clock to run while idle
++ *
++ * you can override this on kernel commandline using
++ *
++ *   glamo_mci.sd_idleclk=0
++ *
++ * for example
++ */
++
++static int sd_idleclk = 0; /* disallow idle clock by default */
++module_param(sd_idleclk, int, 0644);
++
++/* used to stash real idleclk state in suspend: we force it to run in there */
++static int suspend_sd_idleclk;
++
++
++unsigned char CRC7(u8 * pu8, int cnt)
++{
++      u8 crc = 0;
++
++      while (cnt--) {
++              int n;
++              u8 d = *pu8++;
++              for (n = 0; n < 8; n++) {
++                      crc <<= 1;
++                      if ((d & 0x80) ^ (crc & 0x80))
++                              crc ^= 0x09;
++                      d <<= 1;
++              }
++      }
++      return (crc << 1) | 1;
++}
++
++static int get_data_buffer(struct glamo_mci_host *host,
++                         volatile u32 *words, volatile u16 **pointer)
++{
++      struct scatterlist *sg;
++
++      *words = 0;
++      *pointer = NULL;
++
++      if (host->pio_active == XFER_NONE)
++              return -EINVAL;
++
++      if ((!host->mrq) || (!host->mrq->data))
++              return -EINVAL;
++
++      if (host->pio_sgptr >= host->mrq->data->sg_len) {
++              dev_dbg(&host->pdev->dev, "no more buffers (%i/%i)\n",
++                    host->pio_sgptr, host->mrq->data->sg_len);
++              return -EBUSY;
++      }
++      sg = &host->mrq->data->sg[host->pio_sgptr];
++
++      *words = sg->length >> 1; /* we are working with a 16-bit data bus */
++      *pointer = page_address(sg_page(sg)) + sg->offset;
++
++      BUG_ON(((long)(*pointer)) & 1);
++
++      host->pio_sgptr++;
++
++      /* dev_info(&host->pdev->dev, "new buffer (%i/%i)\n",
++            host->pio_sgptr, host->mrq->data->sg_len); */
++      return 0;
++}
++
++static void do_pio_read(struct glamo_mci_host *host)
++{
++      int res;
++      u16 __iomem *from_ptr = host->base_data + (RESSIZE(host->mem_data) /
++                                                            sizeof(u16) / 2);
++#ifdef DEBUG
++      u16 * block;
++#endif
++
++      while (1) {
++              res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
++              if (res) {
++                      host->pio_active = XFER_NONE;
++                      host->complete_what = COMPLETION_FINALIZE;
++
++                      dev_dbg(&host->pdev->dev, "pio_read(): "
++                              "complete (no more data).\n");
++                      return;
++              }
++
++              dev_dbg(&host->pdev->dev, "pio_read(): host->pio_words: %d\n",
++                              host->pio_words);
++
++              host->pio_count += host->pio_words << 1;
++
++#ifdef DEBUG
++              block = (u16 *)host->pio_ptr;
++              res = host->pio_words << 1;
++#endif
++#if 0
++              /* u16-centric memcpy */
++              while (host->pio_words--)
++                      *host->pio_ptr++ = *from_ptr++;
++#else
++              /* memcpy can be faster? */
++              memcpy((void *)host->pio_ptr, from_ptr, host->pio_words << 1);
++              host->pio_ptr += host->pio_words;
++#endif
++
++#ifdef DEBUG
++              print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
++                             (void *)block, res, 1);
++#endif
++      }
++}
++
++static int do_pio_write(struct glamo_mci_host *host)
++{
++      int res = 0;
++      volatile u16 __iomem *to_ptr = host->base_data;
++      int err = 0;
++
++      dev_dbg(&host->pdev->dev, "pio_write():\n");
++      while (!res) {
++              res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
++              if (res)
++                      continue;
++
++              dev_dbg(&host->pdev->dev, "pio_write():new source: [%i]@[%p]\n",
++                      host->pio_words, host->pio_ptr);
++
++              host->pio_count += host->pio_words << 1;
++              while (host->pio_words--)
++                      writew(*host->pio_ptr++, to_ptr++);
++      }
++
++      dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
++      host->pio_active = XFER_NONE;
++      return err;
++}
++
++static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&clock_lock, flags);
++
++      if (div < 0) {
++              /* stop clock - remove clock from divider input */
++              writew(readw(glamo_mci_def_pdata.pglamo->base +
++                   GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
++                   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
++
++              goto done;
++      } else {
++              /* set the nearest prescaler factor
++              *
++              * register shared with SCLK divisor -- no chance of race because
++              * we don't use sensor interface
++              */
++              writew((readw(glamo_mci_def_pdata.pglamo->base +
++                              GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
++                     glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
++              /* enable clock to divider input */
++              writew(readw(glamo_mci_def_pdata.pglamo->base +
++                      GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
++                   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
++      }
++
++      if (host->force_slow_during_powerup)
++              div = host->clk_rate / sd_post_power_clock;
++      else
++              if (host->pdata->glamo_mci_use_slow)
++                      if ((host->pdata->glamo_mci_use_slow)())
++                              div = div * sd_slow_ratio;
++
++      if (div > 255)
++              div = 255;
++
++      /*
++       * set the nearest prescaler factor
++       *
++       * register shared with SCLK divisor -- no chance of race because
++       * we don't use sensor interface
++       */
++      writew((readw(glamo_mci_def_pdata.pglamo->base +
++                      GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
++              glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
++      /* enable clock to divider input */
++      writew(readw(glamo_mci_def_pdata.pglamo->base +
++              GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
++              glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
++
++done:
++      spin_unlock_irqrestore(&clock_lock, flags);
++}
++
++static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq,
++                                                                int *division)
++{
++      int div = 0;
++      int real_rate = 0;
++
++      if (freq) {
++              /* Set clock */
++              for (div = 0; div < 256; div++) {
++                      real_rate = host->clk_rate / (div + 1);
++                      if (real_rate <= freq)
++                              break;
++              }
++              if (div > 255)
++                      div = 255;
++
++              if (division)
++                      *division = div;
++
++              __glamo_mci_fix_card_div(host, div);
++
++      } else {
++              /* stop clock */
++              if (division)
++                      *division = 0xff;
++
++              if (!sd_idleclk && !host->force_slow_during_powerup)
++                      /* clock off */
++                      __glamo_mci_fix_card_div(host, -1);
++      }
++
++      return real_rate;
++}
++
++
++static void glamo_mci_irq_worker(struct work_struct *work)
++{
++      struct glamo_mci_host *host =
++                          container_of(work, struct glamo_mci_host, irq_work);
++      struct mmc_command *cmd = host->mrq->cmd;
++
++      if (host->pio_active == XFER_READ)
++              do_pio_read(host);
++
++      host->mrq->data->bytes_xfered = host->pio_count;
++      dev_dbg(&host->pdev->dev, "count=%d\n", host->pio_count);
++
++      /* issue STOP if we have been given one to use */
++      if (host->mrq->stop) {
++              host->cmd_is_stop = 1;
++              glamo_mci_send_request(host->mmc);
++              host->cmd_is_stop = 0;
++      }
++
++      if (!sd_idleclk && !host->force_slow_during_powerup)
++              /* clock off */
++              __glamo_mci_fix_card_div(host, -1);
++
++      host->complete_what = COMPLETION_NONE;
++      host->mrq = NULL;
++      mmc_request_done(host->mmc, cmd->mrq);
++}
++
++static void glamo_mci_irq_host(struct glamo_mci_host *host)
++{
++      u16 status;
++      struct mmc_command *cmd;
++      unsigned long iflags;
++
++      if (host->suspending) { /* bad news, dangerous time */
++              dev_err(&host->pdev->dev, "****glamo_mci_irq before resumed\n");
++              return;
++      }
++
++      if (!host->mrq)
++              return;
++      cmd = host->mrq->cmd;
++      if (!cmd)
++              return;
++
++      spin_lock_irqsave(&host->complete_lock, iflags);
++
++      status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
++      dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
++
++      /* ack this interrupt source */
++      writew(GLAMO_IRQ_MMC,
++             glamo_mci_def_pdata.pglamo->base + GLAMO_REG_IRQ_CLEAR);
++
++      /* we ignore a data timeout report if we are also told the data came */
++      if (status & GLAMO_STAT1_MMC_RB_DRDY)
++              status &= ~GLAMO_STAT1_MMC_DTOUT;
++
++      if (status & (GLAMO_STAT1_MMC_RTOUT |
++                    GLAMO_STAT1_MMC_DTOUT))
++              cmd->error = -ETIMEDOUT;
++      if (status & (GLAMO_STAT1_MMC_BWERR |
++                    GLAMO_STAT1_MMC_BRERR))
++              cmd->error = -EILSEQ;
++      if (cmd->error) {
++              dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
++              goto done;
++      }
++
++      /*
++       * disable the initial slow start after first bulk transfer
++       */
++      if (host->force_slow_during_powerup)
++              host->force_slow_during_powerup--;
++
++      /*
++       * we perform the memcpy out of Glamo memory outside of IRQ context
++       * so we don't block other interrupts
++       */
++      schedule_work(&host->irq_work);
++
++      goto leave;
++
++done:
++      host->complete_what = COMPLETION_NONE;
++      host->mrq = NULL;
++      mmc_request_done(host->mmc, cmd->mrq);
++leave:
++      spin_unlock_irqrestore(&host->complete_lock, iflags);
++}
++
++static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
++{
++      struct glamo_mci_host *host = (struct glamo_mci_host *)
++                                    desc->handler_data;
++
++      if (host)
++              glamo_mci_irq_host(host);
++
++}
++
++static int glamo_mci_send_command(struct glamo_mci_host *host,
++                                struct mmc_command *cmd)
++{
++      u8 u8a[6];
++      u16 fire = 0;
++
++      /* if we can't do it, reject as busy */
++      if (!readw(host->base + GLAMO_REG_MMC_RB_STAT1) &
++           GLAMO_STAT1_MMC_IDLE) {
++              host->mrq = NULL;
++              cmd->error = -EBUSY;
++              mmc_request_done(host->mmc, host->mrq);
++              return -EBUSY;
++      }
++
++      /* create an array in wire order for CRC computation */
++      u8a[0] = 0x40 | (cmd->opcode & 0x3f);
++      u8a[1] = (u8)(cmd->arg >> 24);
++      u8a[2] = (u8)(cmd->arg >> 16);
++      u8a[3] = (u8)(cmd->arg >> 8);
++      u8a[4] = (u8)cmd->arg;
++      u8a[5] = CRC7(&u8a[0], 5); /* CRC7 on first 5 bytes of packet */
++
++      /* issue the wire-order array including CRC in register order */
++      writew((u8a[4] << 8) | u8a[5], host->base + GLAMO_REG_MMC_CMD_REG1);
++      writew((u8a[2] << 8) | u8a[3], host->base + GLAMO_REG_MMC_CMD_REG2);
++      writew((u8a[0] << 8) | u8a[1], host->base + GLAMO_REG_MMC_CMD_REG3);
++
++      /* command index toggle */
++      fire |= (host->ccnt & 1) << 12;
++
++      /* set type of command */
++      switch (mmc_cmd_type(cmd)) {
++      case MMC_CMD_BC:
++              fire |= GLAMO_FIRE_MMC_CMDT_BNR;
++              break;
++      case MMC_CMD_BCR:
++              fire |= GLAMO_FIRE_MMC_CMDT_BR;
++              break;
++      case MMC_CMD_AC:
++              fire |= GLAMO_FIRE_MMC_CMDT_AND;
++              break;
++      case MMC_CMD_ADTC:
++              fire |= GLAMO_FIRE_MMC_CMDT_AD;
++              break;
++      }
++      /*
++       * if it expects a response, set the type expected
++       *
++       * R1, Length  : 48bit, Normal response
++       * R1b, Length : 48bit, same R1, but added card busy status
++       * R2, Length  : 136bit (really 128 bits with CRC snipped)
++       * R3, Length  : 48bit (OCR register value)
++       * R4, Length  : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
++       * R5, Length  : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
++       * R6, Length  : 48bit (RCA register)
++       * R7, Length  : 48bit (interface condition, VHS(voltage supplied),
++       *                     check pattern, CRC7)
++       */
++      switch (mmc_resp_type(cmd)) {
++      case MMC_RSP_R6: /* same index as R7 and R1 */
++              fire |= GLAMO_FIRE_MMC_RSPT_R1;
++              break;
++      case MMC_RSP_R1B:
++              fire |= GLAMO_FIRE_MMC_RSPT_R1b;
++              break;
++      case MMC_RSP_R2:
++              fire |= GLAMO_FIRE_MMC_RSPT_R2;
++              break;
++      case MMC_RSP_R3:
++              fire |= GLAMO_FIRE_MMC_RSPT_R3;
++              break;
++      /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
++      }
++      /*
++       * From the command index, set up the command class in the host ctrllr
++       *
++       * missing guys present on chip but couldn't figure out how to use yet:
++       *     0x0 "stream read"
++       *     0x9 "cancel running command"
++       */
++      switch (cmd->opcode) {
++      case MMC_READ_SINGLE_BLOCK:
++              fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
++              break;
++      case MMC_SWITCH: /* 64 byte payload */
++      case 0x33: /* observed issued by MCI */
++      case MMC_READ_MULTIPLE_BLOCK:
++              /* we will get an interrupt off this */
++              if (!cmd->mrq->stop)
++                      /* multiblock no stop */
++                      fire |= GLAMO_FIRE_MMC_CC_MBRNS;
++              else
++                       /* multiblock with stop */
++                      fire |= GLAMO_FIRE_MMC_CC_MBRS;
++              break;
++      case MMC_WRITE_BLOCK:
++              fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
++              break;
++      case MMC_WRITE_MULTIPLE_BLOCK:
++              if (cmd->mrq->stop)
++                       /* multiblock with stop */
++                      fire |= GLAMO_FIRE_MMC_CC_MBWS;
++              else
++//                     /* multiblock NO stop-- 'RESERVED'? */
++                      fire |= GLAMO_FIRE_MMC_CC_MBWNS;
++              break;
++      case MMC_STOP_TRANSMISSION:
++              fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
++              break;
++      default:
++              fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
++              break;
++      }
++
++      /* always largest timeout */
++      writew(0xfff, host->base + GLAMO_REG_MMC_TIMEOUT);
++
++      /* Generate interrupt on txfer */
++      writew((readw(host->base + GLAMO_REG_MMC_BASIC) & 0x3e) |
++                 0x0800 | GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
++                 GLAMO_BASIC_MMC_EN_COMPL_INT | (sd_drive << 6),
++                 host->base + GLAMO_REG_MMC_BASIC);
++
++      /* send the command out on the wire */
++      /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
++      writew(fire, host->base + GLAMO_REG_MMC_CMD_FIRE);
++      cmd->error = 0;
++      return 0;
++}
++
++static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
++                               struct mmc_data *data)
++{
++      /*
++       * the S-Media-internal RAM offset for our MMC buffer
++       * Read is halfway up the buffer and write is at the start
++       */
++      if (data->flags & MMC_DATA_READ) {
++              writew((u16)(GLAMO_FB_SIZE + (RESSIZE(host->mem_data) / 2)),
++                         host->base + GLAMO_REG_MMC_WDATADS1);
++              writew((u16)((GLAMO_FB_SIZE +
++                                      (RESSIZE(host->mem_data) / 2)) >> 16),
++                         host->base + GLAMO_REG_MMC_WDATADS2);
++      } else {
++              writew((u16)GLAMO_FB_SIZE, host->base +
++                                             GLAMO_REG_MMC_RDATADS1);
++              writew((u16)(GLAMO_FB_SIZE >> 16), host->base +
++                                                     GLAMO_REG_MMC_RDATADS2);
++      }
++
++      /* set up the block info */
++      writew(data->blksz, host->base + GLAMO_REG_MMC_DATBLKLEN);
++      writew(data->blocks, host->base + GLAMO_REG_MMC_DATBLKCNT);
++      dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
++                                 data->blksz, data->blocks);
++      host->pio_sgptr = 0;
++      host->pio_words = 0;
++      host->pio_count = 0;
++      host->pio_active = 0;
++      /* if write, prep the write into the shared RAM before the command */
++      if (data->flags & MMC_DATA_WRITE) {
++              host->pio_active = XFER_WRITE;
++              return do_pio_write(host);
++      }
++      host->pio_active = XFER_READ;
++      return 0;
++}
++
++static void glamo_mci_send_request(struct mmc_host *mmc)
++{
++      struct glamo_mci_host *host = mmc_priv(mmc);
++      struct mmc_request *mrq = host->mrq;
++      struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
++      u16 * pu16 = (u16 *)&cmd->resp[0];
++      u16 * reg_resp = (u16 *)(host->base + GLAMO_REG_MMC_CMD_RSP1);
++      u16 status;
++      int n;
++      int timeout = 1000000;
++      int insanity_timeout = 1000000;
++
++      if (host->suspending) {
++              dev_err(&host->pdev->dev, "IGNORING glamo_mci_send_request while "
++                                                               "suspended\n");
++              cmd->error = -EIO;
++              if (cmd->data)
++                      cmd->data->error = -EIO;
++              mmc_request_done(mmc, mrq);
++              return;
++      }
++
++      host->ccnt++;
++      /*
++       * somehow 2.6.24 MCI manages to issue MMC_WRITE_BLOCK *without* the
++       * MMC_DATA_WRITE flag, WTF?  Work around the madness.
++       */
++      if (cmd->opcode == MMC_WRITE_BLOCK)
++              if (mrq->data)
++                      mrq->data->flags |= MMC_DATA_WRITE;
++
++       /* this guy has data to read/write? */
++      if ((!host->cmd_is_stop) && cmd->data) {
++              int res;
++              host->dcnt++;
++              res = glamo_mci_prepare_pio(host, cmd->data);
++              if (res) {
++                      cmd->error = -EIO;
++                      cmd->data->error = -EIO;
++                      mmc_request_done(mmc, mrq);
++                      return;
++              }
++      }
++
++      dev_dbg(&host->pdev->dev,"cmd 0x%x, "
++               "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
++               cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
++               cmd->flags);
++
++      /* resume requested clock rate
++       * scale it down by sd_slow_ratio if platform requests it
++       */
++      __glamo_mci_fix_card_div(host, host->clk_div);
++
++      if (glamo_mci_send_command(host, cmd))
++              goto bail;
++
++      /* we are deselecting card?  because it isn't going to ack then... */
++      if ((cmd->opcode == 7) && (cmd->arg == 0))
++              goto done;
++
++      /*
++       * we must spin until response is ready or timed out
++       * -- we don't get interrupts unless there is a bulk rx
++       */
++      do
++              status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
++      while (((((status >> 15) & 1) != (host->ccnt & 1)) ||
++              (!(status & (GLAMO_STAT1_MMC_RB_RRDY |
++                           GLAMO_STAT1_MMC_RTOUT |
++                           GLAMO_STAT1_MMC_DTOUT |
++                           GLAMO_STAT1_MMC_BWERR |
++                           GLAMO_STAT1_MMC_BRERR)))) && (insanity_timeout--));
++
++      if (insanity_timeout < 0)
++              dev_info(&host->pdev->dev, "command timeout, continuing\n");
++
++      if (status & (GLAMO_STAT1_MMC_RTOUT |
++                    GLAMO_STAT1_MMC_DTOUT))
++              cmd->error = -ETIMEDOUT;
++      if (status & (GLAMO_STAT1_MMC_BWERR |
++                    GLAMO_STAT1_MMC_BRERR))
++              cmd->error = -EILSEQ;
++
++      if (host->cmd_is_stop)
++              goto bail;
++
++      if (cmd->error) {
++              dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
++              goto done;
++      }
++      /*
++       * mangle the response registers in two different exciting
++       * undocumented ways discovered by trial and error
++       */
++      if (mmc_resp_type(cmd) == MMC_RSP_R2)
++              /* grab the response */
++              for (n = 0; n < 8; n++) /* super mangle power 1 */
++                      pu16[n ^ 6] = readw(&reg_resp[n]);
++      else
++              for (n = 0; n < 3; n++) /* super mangle power 2 */
++                      pu16[n] = (readw(&reg_resp[n]) >> 8) |
++                                (readw(&reg_resp[n + 1]) << 8);
++      /*
++       * if we don't have bulk data to take care of, we're done
++       */
++      if (!cmd->data)
++              goto done;
++      if (!(cmd->data->flags & (MMC_DATA_READ | MMC_DATA_WRITE)))
++              goto done;
++
++      /*
++       * Otherwise can can use the interrupt as async completion --
++       * if there is read data coming, or we wait for write data to complete,
++       * exit without mmc_request_done() as the payload interrupt
++       * will service it
++       */
++      dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
++      /*
++       * if the glamo INT# line isn't wired (*cough* it can happen)
++       * I'm afraid we have to spin on the IRQ status bit and "be
++       * our own INT# line"
++       */
++      if (!glamo_mci_def_pdata.pglamo->irq_works) {
++              /*
++               * we have faith we will get an "interrupt"...
++               * but something insane like suspend problems can mean
++               * we spin here forever, so we timeout after a LONG time
++               */
++              while ((!(readw(glamo_mci_def_pdata.pglamo->base +
++                       GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
++                     (timeout--))
++                      ;
++
++              if (timeout < 0) {
++                      if (cmd->data->error)
++                              cmd->data->error = -ETIMEDOUT;
++                      dev_err(&host->pdev->dev, "Payload timeout\n");
++                      goto bail;
++              }
++
++              /* yay we are an interrupt controller! -- call the ISR
++               * it will stop clock to card
++               */
++              glamo_mci_irq_host(host);
++      }
++      return;
++
++done:
++      host->complete_what = COMPLETION_NONE;
++      host->mrq = NULL;
++      mmc_request_done(host->mmc, cmd->mrq);
++bail:
++      if (!sd_idleclk && !host->force_slow_during_powerup)
++              /* stop the clock to card */
++              __glamo_mci_fix_card_div(host, -1);
++}
++
++static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++      struct glamo_mci_host *host = mmc_priv(mmc);
++
++      host->cmd_is_stop = 0;
++      host->mrq = mrq;
++      glamo_mci_send_request(mmc);
++}
++
++#if 1
++static void glamo_mci_reset(struct glamo_mci_host *host)
++{
++      if (host->suspending) {
++              dev_err(&host->pdev->dev, "IGNORING glamo_mci_reset while "
++                                                               "suspended\n");
++              return;
++      }
++      dev_dbg(&host->pdev->dev, "******* glamo_mci_reset\n");
++      /* reset MMC controller */
++      writew(GLAMO_CLOCK_MMC_RESET | GLAMO_CLOCK_MMC_DG_TCLK |
++                 GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
++                 GLAMO_CLOCK_MMC_EN_M9CLK,
++                 glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
++      udelay(10);
++      /* and disable reset */
++      writew(GLAMO_CLOCK_MMC_DG_TCLK |
++                 GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
++                 GLAMO_CLOCK_MMC_EN_M9CLK,
++                 glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
++}
++#endif
++static inline int glamo_mci_get_mv(int vdd)
++{
++      int mv = 1650;
++
++      if (vdd > 7)
++              mv += 350 + 100 * (vdd - 8);
++
++      return mv;
++}
++
++static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++      struct glamo_mci_host *host = mmc_priv(mmc);
++      struct regulator *regulator;
++      int n = 0;
++      int div;
++      int powering = 0;
++      int mv;
++
++      if (host->suspending) {
++              dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
++                                                               "suspended\n");
++              return;
++      }
++
++      regulator = host->regulator;
++
++      /* Set power */
++      switch(ios->power_mode) {
++      case MMC_POWER_UP:
++              if (host->pdata->glamo_can_set_mci_power()) {
++                      mv = glamo_mci_get_mv(ios->vdd);
++                      regulator_set_voltage(regulator, mv * 1000, mv * 1000);
++                      regulator_enable(regulator);
++              }
++              break;
++      case MMC_POWER_ON:
++              /*
++               * we should use very slow clock until first bulk
++               * transfer completes OK
++               */
++              host->force_slow_during_powerup = 1;
++
++              if (host->vdd_current != ios->vdd) {
++                      if (host->pdata->glamo_can_set_mci_power()) {
++                              mv = glamo_mci_get_mv(ios->vdd);
++                              regulator_set_voltage(regulator, mv * 1000, mv * 1000);
++                              printk(KERN_INFO "SD power -> %dmV\n", mv);
++                      }
++                      host->vdd_current = ios->vdd;
++              }
++              if (host->power_mode_current == MMC_POWER_OFF) {
++                      glamo_engine_enable(glamo_mci_def_pdata.pglamo,
++                                                            GLAMO_ENGINE_MMC);
++                      powering = 1;
++              }
++              break;
++
++      case MMC_POWER_OFF:
++      default:
++              if (host->power_mode_current == MMC_POWER_OFF)
++                      break;
++              /* never want clocking with dead card */
++              __glamo_mci_fix_card_div(host, -1);
++
++              glamo_engine_disable(glamo_mci_def_pdata.pglamo,
++                                   GLAMO_ENGINE_MMC);
++              regulator_disable(regulator);
++              host->vdd_current = -1;
++              break;
++      }
++      host->power_mode_current = ios->power_mode;
++
++      host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
++      host->clk_div = div;
++
++      /* after power-up, we are meant to give it >= 74 clocks so it can
++       * initialize itself.  Doubt any modern cards need it but anyway...
++       */
++      if (powering)
++              mdelay(1);
++
++      if (!sd_idleclk && !host->force_slow_during_powerup)
++              /* stop the clock to card, because we are idle until transfer */
++              __glamo_mci_fix_card_div(host, -1);
++
++      if ((ios->power_mode == MMC_POWER_ON) ||
++          (ios->power_mode == MMC_POWER_UP)) {
++              dev_info(&host->pdev->dev,
++                      "powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
++                      "Bus width=%d\n",(int)ios->vdd,
++                      host->real_rate / 1000, (int)host->clk_div,
++                      ios->clock / 1000, (int)ios->bus_width);
++      } else
++              dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
++
++      /* set bus width */
++      host->bus_width = ios->bus_width;
++      if (host->bus_width == MMC_BUS_WIDTH_4)
++              n = GLAMO_BASIC_MMC_EN_4BIT_DATA;
++      writew((readw(host->base + GLAMO_REG_MMC_BASIC) &
++                                        (~(GLAMO_BASIC_MMC_EN_4BIT_DATA |
++                                           GLAMO_BASIC_MMC_EN_DR_STR0 |
++                                           GLAMO_BASIC_MMC_EN_DR_STR1))) | n |
++                             sd_drive << 6, host->base + GLAMO_REG_MMC_BASIC);
++}
++
++
++/*
++ * no physical write protect supported by us
++ */
++static int glamo_mci_get_ro(struct mmc_host *mmc)
++{
++      return 0;
++}
++
++static struct mmc_host_ops glamo_mci_ops = {
++      .request        = glamo_mci_request,
++      .set_ios        = glamo_mci_set_ios,
++      .get_ro         = glamo_mci_get_ro,
++};
++
++static int glamo_mci_probe(struct platform_device *pdev)
++{
++      struct mmc_host         *mmc;
++      struct glamo_mci_host   *host;
++      int ret;
++
++      dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
++
++      mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
++      if (!mmc) {
++              ret = -ENOMEM;
++              goto probe_out;
++      }
++
++      host = mmc_priv(mmc);
++      host->mmc = mmc;
++      host->pdev = pdev;
++      host->pdata = &glamo_mci_def_pdata;
++      host->power_mode_current = MMC_POWER_OFF;
++
++      host->complete_what = COMPLETION_NONE;
++      host->pio_active = XFER_NONE;
++
++      spin_lock_init(&host->complete_lock);
++      INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
++
++      host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!host->mem) {
++              dev_err(&pdev->dev,
++                      "failed to get io memory region resouce.\n");
++
++              ret = -ENOENT;
++              goto probe_free_host;
++      }
++
++      host->mem = request_mem_region(host->mem->start,
++              RESSIZE(host->mem), pdev->name);
++
++      if (!host->mem) {
++              dev_err(&pdev->dev, "failed to request io memory region.\n");
++              ret = -ENOENT;
++              goto probe_free_host;
++      }
++
++      host->base = ioremap(host->mem->start, RESSIZE(host->mem));
++      if (!host->base) {
++              dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
++              ret = -EINVAL;
++              goto probe_free_mem_region;
++      }
++
++      host->regulator = regulator_get(&pdev->dev, "SD_3V3");
++      if (!host->regulator) {
++              dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
++              return -ENODEV;
++      }
++
++      /* set the handler for our bit of the shared chip irq register */
++      set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq);
++      /* stash host as our handler's private data */
++      set_irq_data(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
++
++      /* Get ahold of our data buffer we use for data in and out on MMC */
++      host->mem_data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++      if (!host->mem_data) {
++              dev_err(&pdev->dev,
++                      "failed to get io memory region resource.\n");
++              ret = -ENOENT;
++              goto probe_iounmap;
++      }
++
++      host->mem_data = request_mem_region(host->mem_data->start,
++              RESSIZE(host->mem_data), pdev->name);
++
++      if (!host->mem_data) {
++              dev_err(&pdev->dev, "failed to request io memory region.\n");
++              ret = -ENOENT;
++              goto probe_iounmap;
++      }
++      host->base_data = ioremap(host->mem_data->start,
++                                        RESSIZE(host->mem_data));
++      host->data_max_size = RESSIZE(host->mem_data);
++
++      if (host->base_data == 0) {
++              dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
++              ret = -EINVAL;
++              goto probe_free_mem_region_data;
++      }
++
++      host->vdd_current = 0;
++      host->clk_rate = 50000000; /* really it's 49152000 */
++      host->clk_div = 16;
++
++      /* explain our host controller capabilities */
++      mmc->ops        = &glamo_mci_ops;
++      mmc->ocr_avail  = host->pdata->ocr_avail;
++      mmc->caps       = MMC_CAP_4_BIT_DATA |
++                        MMC_CAP_MMC_HIGHSPEED |
++                        MMC_CAP_SD_HIGHSPEED;
++      mmc->f_min      = host->clk_rate / 256;
++      mmc->f_max      = sd_max_clk;
++
++      mmc->max_blk_count      = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
++      mmc->max_blk_size       = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
++      mmc->max_req_size       = RESSIZE(host->mem_data) / 2;
++      mmc->max_seg_size       = mmc->max_req_size;
++      mmc->max_phys_segs      = 1; /* hw doesn't talk about segs??? */
++      mmc->max_hw_segs        = 1;
++
++      dev_info(&host->pdev->dev, "probe: mapped mci_base:%p irq:%u.\n",
++              host->base, host->irq);
++
++      platform_set_drvdata(pdev, mmc);
++
++      glamo_engine_enable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
++      glamo_mci_reset(host);
++
++      if ((ret = mmc_add_host(mmc))) {
++              dev_err(&pdev->dev, "failed to add mmc host.\n");
++              goto probe_free_mem_region_data;
++      }
++
++      dev_info(&pdev->dev,"initialisation done.\n");
++      return 0;
++
++ probe_free_mem_region_data:
++      release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
++
++ probe_iounmap:
++      iounmap(host->base);
++
++ probe_free_mem_region:
++      release_mem_region(host->mem->start, RESSIZE(host->mem));
++
++ probe_free_host:
++      mmc_free_host(mmc);
++ probe_out:
++      return ret;
++}
++
++static int glamo_mci_remove(struct platform_device *pdev)
++{
++      struct mmc_host         *mmc  = platform_get_drvdata(pdev);
++      struct glamo_mci_host   *host = mmc_priv(mmc);
++      struct regulator *regulator;
++
++      mmc_remove_host(mmc);
++      /* stop using our handler, revert it to default */
++      set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), handle_level_irq);
++      iounmap(host->base);
++      iounmap(host->base_data);
++      release_mem_region(host->mem->start, RESSIZE(host->mem));
++      release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
++
++      regulator = host->regulator;
++      regulator_put(regulator);
++      
++      mmc_free_host(mmc);
++
++      glamo_engine_disable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
++      return 0;
++}
++
++
++#ifdef CONFIG_PM
++
++static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
++{
++      struct mmc_host *mmc = platform_get_drvdata(dev);
++      struct glamo_mci_host   *host = mmc_priv(mmc);
++      int ret;
++
++      cancel_work_sync(&host->irq_work);
++
++      /*
++       * possible workaround for SD corruption during suspend - resume
++       * make sure the clock was running during suspend and consequently
++       * resume
++       */
++      __glamo_mci_fix_card_div(host, host->clk_div);
++
++      /* we are going to do more commands to override this in
++       * mmc_suspend_host(), so we need to change sd_idleclk for the
++       * duration as well
++       */
++      suspend_sd_idleclk = sd_idleclk;
++      sd_idleclk = 1;
++
++      ret = mmc_suspend_host(mmc, state);
++
++      host->suspending++;
++      /* so that when we resume, we use any modified max rate */
++      mmc->f_max = sd_max_clk;
++
++      return ret;
++}
++
++int glamo_mci_resume(struct platform_device *dev)
++{
++      struct mmc_host *mmc = platform_get_drvdata(dev);
++      struct glamo_mci_host   *host = mmc_priv(mmc);
++      int ret;
++
++      sd_idleclk = 1;
++
++      glamo_engine_enable(host->pdata->pglamo, GLAMO_ENGINE_MMC);
++      glamo_mci_reset(host);
++
++      host->suspending--;
++
++      ret = mmc_resume_host(mmc);
++
++      /* put sd_idleclk back to pre-suspend state */
++      sd_idleclk = suspend_sd_idleclk;
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(glamo_mci_resume);
++
++#else /* CONFIG_PM */
++#define glamo_mci_suspend NULL
++#define glamo_mci_resume NULL
++#endif /* CONFIG_PM */
++
++
++static struct platform_driver glamo_mci_driver =
++{
++      .driver.name    = "glamo-mci",
++      .probe          = glamo_mci_probe,
++      .remove         = glamo_mci_remove,
++      .suspend        = glamo_mci_suspend,
++      .resume         = glamo_mci_resume,
++};
++
++static int __init glamo_mci_init(void)
++{
++      spin_lock_init(&clock_lock);
++      platform_driver_register(&glamo_mci_driver);
++      return 0;
++}
++
++static void __exit glamo_mci_exit(void)
++{
++      platform_driver_unregister(&glamo_mci_driver);
++}
++
++module_init(glamo_mci_init);
++module_exit(glamo_mci_exit);
++
++MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-mci.h linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-mci.h
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-mci.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-mci.h     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,84 @@
++/*
++ *  linux/drivers/mmc/host/glamo-mmc.h - GLAMO MCI driver
++ *
++ *  Copyright (C) 2007-2008 Openmoko, Inc, Andy Green <andy@openmoko.com>
++ *   based on S3C MMC driver -->
++ *  Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/regulator/consumer.h>
++
++enum glamo_mci_waitfor {
++      COMPLETION_NONE,
++      COMPLETION_FINALIZE,
++      COMPLETION_CMDSENT,
++      COMPLETION_RSPFIN,
++      COMPLETION_XFERFINISH,
++      COMPLETION_XFERFINISH_RSPFIN,
++};
++
++struct glamo_mci_host {
++      struct platform_device  *pdev;
++      struct glamo_mci_pdata  *pdata;
++      struct mmc_host         *mmc;
++      struct resource         *mem;
++      struct resource         *mem_data;
++      struct clk              *clk;
++      void __iomem            *base;
++      u16 __iomem             *base_data;
++      int                     irq;
++      int                     irq_cd;
++      int                     dma;
++      int                     data_max_size;
++
++      int                     suspending;
++
++      int                     power_mode_current;
++      unsigned int            vdd_current;
++
++      unsigned long           clk_rate;
++      unsigned long           clk_div;
++      unsigned long           real_rate;
++      u8                      prescaler;
++
++      int                     force_slow_during_powerup;
++
++      unsigned                sdiimsk;
++      int                     dodma;
++
++      volatile int            dmatogo;
++
++      struct mmc_request      *mrq;
++      int                     cmd_is_stop;
++      struct work_struct      irq_work;
++
++      spinlock_t              complete_lock;
++      volatile enum           glamo_mci_waitfor
++                              complete_what;
++
++      volatile int            dma_complete;
++
++      volatile u32            pio_sgptr;
++      volatile u32            pio_words;
++      volatile u32            pio_count;
++      volatile u16            *pio_ptr;
++#define XFER_NONE 0
++#define XFER_READ 1
++#define XFER_WRITE 2
++      volatile u32            pio_active;
++
++      int                     bus_width;
++
++      char                    dbgmsg_cmd[301];
++      char                    dbgmsg_dat[301];
++      volatile char           *status;
++
++      unsigned int            ccnt, dcnt;
++      struct tasklet_struct   pio_tasklet;
++
++      struct regulator        *regulator;
++};
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-regs.h linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-regs.h
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-regs.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-regs.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,632 @@
++#ifndef _GLAMO_REGS_H
++#define _GLAMO_REGS_H
++
++/* Smedia Glamo 336x/337x driver
++ *
++ * (C) 2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++enum glamo_regster_offsets {
++      GLAMO_REGOFS_GENERIC    = 0x0000,
++      GLAMO_REGOFS_HOSTBUS    = 0x0200,
++      GLAMO_REGOFS_MEMORY     = 0x0300,
++      GLAMO_REGOFS_VIDCAP     = 0x0400,
++      GLAMO_REGOFS_ISP        = 0x0500,
++      GLAMO_REGOFS_JPEG       = 0x0800,
++      GLAMO_REGOFS_MPEG       = 0x0c00,
++      GLAMO_REGOFS_LCD        = 0x1100,
++      GLAMO_REGOFS_MMC        = 0x1400,
++      GLAMO_REGOFS_MPROC0     = 0x1500,
++      GLAMO_REGOFS_MPROC1     = 0x1580,
++      GLAMO_REGOFS_CMDQUEUE   = 0x1600,
++      GLAMO_REGOFS_RISC       = 0x1680,
++      GLAMO_REGOFS_2D         = 0x1700,
++      GLAMO_REGOFS_3D         = 0x1b00,
++      GLAMO_REGOFS_END        = 0x2400,
++};
++
++
++enum glamo_register_generic {
++      GLAMO_REG_GCONF1        = 0x0000,
++      GLAMO_REG_GCONF2        = 0x0002,
++#define       GLAMO_REG_DEVICE_ID     GLAMO_REG_GCONF2
++      GLAMO_REG_GCONF3        = 0x0004,
++#define       GLAMO_REG_REVISION_ID   GLAMO_REG_GCONF3
++      GLAMO_REG_IRQ_GEN1      = 0x0006,
++#define GLAMO_REG_IRQ_ENABLE  GLAMO_REG_IRQ_GEN1
++      GLAMO_REG_IRQ_GEN2      = 0x0008,
++#define GLAMO_REG_IRQ_SET     GLAMO_REG_IRQ_GEN2
++      GLAMO_REG_IRQ_GEN3      = 0x000a,
++#define GLAMO_REG_IRQ_CLEAR   GLAMO_REG_IRQ_GEN3
++      GLAMO_REG_IRQ_GEN4      = 0x000c,
++#define GLAMO_REG_IRQ_STATUS  GLAMO_REG_IRQ_GEN4
++      GLAMO_REG_CLOCK_HOST    = 0x0010,
++      GLAMO_REG_CLOCK_MEMORY  = 0x0012,
++      GLAMO_REG_CLOCK_LCD     = 0x0014,
++      GLAMO_REG_CLOCK_MMC     = 0x0016,
++      GLAMO_REG_CLOCK_ISP     = 0x0018,
++      GLAMO_REG_CLOCK_JPEG    = 0x001a,
++      GLAMO_REG_CLOCK_3D      = 0x001c,
++      GLAMO_REG_CLOCK_2D      = 0x001e,
++      GLAMO_REG_CLOCK_RISC1   = 0x0020,       /* 3365 only? */
++      GLAMO_REG_CLOCK_RISC2   = 0x0022,       /* 3365 only? */
++      GLAMO_REG_CLOCK_MPEG    = 0x0024,
++      GLAMO_REG_CLOCK_MPROC   = 0x0026,
++
++      GLAMO_REG_CLOCK_GEN5_1  = 0x0030,
++      GLAMO_REG_CLOCK_GEN5_2  = 0x0032,
++      GLAMO_REG_CLOCK_GEN6    = 0x0034,
++      GLAMO_REG_CLOCK_GEN7    = 0x0036,
++      GLAMO_REG_CLOCK_GEN8    = 0x0038,
++      GLAMO_REG_CLOCK_GEN9    = 0x003a,
++      GLAMO_REG_CLOCK_GEN10   = 0x003c,
++      GLAMO_REG_CLOCK_GEN11   = 0x003e,
++      GLAMO_REG_PLL_GEN1      = 0x0040,
++      GLAMO_REG_PLL_GEN2      = 0x0042,
++      GLAMO_REG_PLL_GEN3      = 0x0044,
++      GLAMO_REG_PLL_GEN4      = 0x0046,
++      GLAMO_REG_PLL_GEN5      = 0x0048,
++      GLAMO_REG_GPIO_GEN1     = 0x0050,
++      GLAMO_REG_GPIO_GEN2     = 0x0052,
++      GLAMO_REG_GPIO_GEN3     = 0x0054,
++      GLAMO_REG_GPIO_GEN4     = 0x0056,
++      GLAMO_REG_GPIO_GEN5     = 0x0058,
++      GLAMO_REG_GPIO_GEN6     = 0x005a,
++      GLAMO_REG_GPIO_GEN7     = 0x005c,
++      GLAMO_REG_GPIO_GEN8     = 0x005e,
++      GLAMO_REG_GPIO_GEN9     = 0x0060,
++      GLAMO_REG_GPIO_GEN10    = 0x0062,
++      GLAMO_REG_DFT_GEN1      = 0x0070,
++      GLAMO_REG_DFT_GEN2      = 0x0072,
++      GLAMO_REG_DFT_GEN3      = 0x0074,
++      GLAMO_REG_DFT_GEN4      = 0x0076,
++
++      GLAMO_REG_DFT_GEN5      = 0x01e0,
++      GLAMO_REG_DFT_GEN6      = 0x01f0,
++};
++
++#define GLAMO_REG_HOSTBUS(x)  (GLAMO_REGOFS_HOSTBUS-2+(x*2))
++
++#define REG_MEM(x)            (GLAMO_REGOFS_MEMORY+(x))
++#define GLAMO_REG_MEM_TIMING(x)       (GLAMO_REG_MEM_TIMING1-2+(x*2))
++
++enum glamo_register_mem {
++      GLAMO_REG_MEM_TYPE      = REG_MEM(0x00),
++      GLAMO_REG_MEM_GEN       = REG_MEM(0x02),
++      GLAMO_REG_MEM_TIMING1   = REG_MEM(0x04),
++      GLAMO_REG_MEM_TIMING2   = REG_MEM(0x06),
++      GLAMO_REG_MEM_TIMING3   = REG_MEM(0x08),
++      GLAMO_REG_MEM_TIMING4   = REG_MEM(0x0a),
++      GLAMO_REG_MEM_TIMING5   = REG_MEM(0x0c),
++      GLAMO_REG_MEM_TIMING6   = REG_MEM(0x0e),
++      GLAMO_REG_MEM_TIMING7   = REG_MEM(0x10),
++      GLAMO_REG_MEM_TIMING8   = REG_MEM(0x12),
++      GLAMO_REG_MEM_TIMING9   = REG_MEM(0x14),
++      GLAMO_REG_MEM_TIMING10  = REG_MEM(0x16),
++      GLAMO_REG_MEM_TIMING11  = REG_MEM(0x18),
++      GLAMO_REG_MEM_POWER1    = REG_MEM(0x1a),
++      GLAMO_REG_MEM_POWER2    = REG_MEM(0x1c),
++      GLAMO_REG_MEM_LCD_BUF1  = REG_MEM(0x1e),
++      GLAMO_REG_MEM_LCD_BUF2  = REG_MEM(0x20),
++      GLAMO_REG_MEM_LCD_BUF3  = REG_MEM(0x22),
++      GLAMO_REG_MEM_LCD_BUF4  = REG_MEM(0x24),
++      GLAMO_REG_MEM_BIST1     = REG_MEM(0x26),
++      GLAMO_REG_MEM_BIST2     = REG_MEM(0x28),
++      GLAMO_REG_MEM_BIST3     = REG_MEM(0x2a),
++      GLAMO_REG_MEM_BIST4     = REG_MEM(0x2c),
++      GLAMO_REG_MEM_BIST5     = REG_MEM(0x2e),
++      GLAMO_REG_MEM_MAH1      = REG_MEM(0x30),
++      GLAMO_REG_MEM_MAH2      = REG_MEM(0x32),
++      GLAMO_REG_MEM_DRAM1     = REG_MEM(0x34),
++      GLAMO_REG_MEM_DRAM2     = REG_MEM(0x36),
++      GLAMO_REG_MEM_CRC       = REG_MEM(0x38),
++};
++
++#define GLAMO_MEM_TYPE_MASK   0x03
++
++enum glamo_reg_mem_dram1 {
++      /* b0 - b10 == refresh period, 1 -> 2048 clocks */
++      GLAMO_MEM_DRAM1_EN_GATE_CLK     = (1 << 11),
++      GLAMO_MEM_DRAM1_SELF_REFRESH    = (1 << 12),
++      GLAMO_MEM_DRAM1_EN_GATE_CKE     = (1 << 13),
++      GLAMO_MEM_DRAM1_EN_DRAM_REFRESH = (1 << 14),
++      GLAMO_MEM_DRAM1_EN_MODEREG_SET  = (1 << 15),
++};
++
++enum glamo_reg_mem_dram2 {
++      GLAMO_MEM_DRAM2_DEEP_PWRDOWN    = (1 << 12),
++};
++
++enum glamo_irq_index {
++      GLAMO_IRQIDX_HOSTBUS    = 0,
++      GLAMO_IRQIDX_JPEG       = 1,
++      GLAMO_IRQIDX_MPEG       = 2,
++      GLAMO_IRQIDX_MPROC1     = 3,
++      GLAMO_IRQIDX_MPROC0     = 4,
++      GLAMO_IRQIDX_CMDQUEUE   = 5,
++      GLAMO_IRQIDX_2D         = 6,
++      GLAMO_IRQIDX_MMC        = 7,
++      GLAMO_IRQIDX_RISC       = 8,
++};
++
++enum glamo_irq {
++      GLAMO_IRQ_HOSTBUS       = (1 << GLAMO_IRQIDX_HOSTBUS),
++      GLAMO_IRQ_JPEG          = (1 << GLAMO_IRQIDX_JPEG),
++      GLAMO_IRQ_MPEG          = (1 << GLAMO_IRQIDX_MPEG),
++      GLAMO_IRQ_MPROC1        = (1 << GLAMO_IRQIDX_MPROC1),
++      GLAMO_IRQ_MPROC0        = (1 << GLAMO_IRQIDX_MPROC0),
++      GLAMO_IRQ_CMDQUEUE      = (1 << GLAMO_IRQIDX_CMDQUEUE),
++      GLAMO_IRQ_2D            = (1 << GLAMO_IRQIDX_2D),
++      GLAMO_IRQ_MMC           = (1 << GLAMO_IRQIDX_MMC),
++      GLAMO_IRQ_RISC          = (1 << GLAMO_IRQIDX_RISC),
++};
++
++enum glamo_reg_clock_host {
++      GLAMO_CLOCK_HOST_DG_BCLK        = 0x0001,
++      GLAMO_CLOCK_HOST_DG_M0CLK       = 0x0004,
++      GLAMO_CLOCK_HOST_RESET          = 0x1000,
++};
++
++enum glamo_reg_clock_mem {
++      GLAMO_CLOCK_MEM_DG_M1CLK        = 0x0001,
++      GLAMO_CLOCK_MEM_EN_M1CLK        = 0x0002,
++      GLAMO_CLOCK_MEM_DG_MOCACLK      = 0x0004,
++      GLAMO_CLOCK_MEM_EN_MOCACLK      = 0x0008,
++      GLAMO_CLOCK_MEM_RESET           = 0x1000,
++      GLAMO_CLOCK_MOCA_RESET          = 0x2000,
++};
++
++enum glamo_reg_clock_lcd {
++      GLAMO_CLOCK_LCD_DG_DCLK         = 0x0001,
++      GLAMO_CLOCK_LCD_EN_DCLK         = 0x0002,
++      GLAMO_CLOCK_LCD_DG_DMCLK        = 0x0004,
++      GLAMO_CLOCK_LCD_EN_DMCLK        = 0x0008,
++      //
++      GLAMO_CLOCK_LCD_EN_DHCLK        = 0x0020,
++      GLAMO_CLOCK_LCD_DG_M5CLK        = 0x0040,
++      GLAMO_CLOCK_LCD_EN_M5CLK        = 0x0080,
++      GLAMO_CLOCK_LCD_RESET           = 0x1000,
++};
++
++enum glamo_reg_clock_mmc {
++      GLAMO_CLOCK_MMC_DG_TCLK         = 0x0001,
++      GLAMO_CLOCK_MMC_EN_TCLK         = 0x0002,
++      GLAMO_CLOCK_MMC_DG_M9CLK        = 0x0004,
++      GLAMO_CLOCK_MMC_EN_M9CLK        = 0x0008,
++      GLAMO_CLOCK_MMC_RESET           = 0x1000,
++};
++
++enum glamo_reg_basic_mmc {
++      /* set to disable CRC error rejection */
++      GLAMO_BASIC_MMC_DISABLE_CRC     = 0x0001,
++      /* enable completion interrupt */
++      GLAMO_BASIC_MMC_EN_COMPL_INT    = 0x0002,
++      /* stop MMC clock while enforced idle waiting for data from card */
++      GLAMO_BASIC_MMC_NO_CLK_RD_WAIT  = 0x0004,
++      /* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
++      GLAMO_BASIC_MMC_EN_4BIT_DATA    = 0x0008,
++      /* enable 75K pullups on D3..D0 */
++      GLAMO_BASIC_MMC_EN_DATA_PUPS    = 0x0010,
++      /* enable 75K pullup on CMD */
++      GLAMO_BASIC_MMC_EN_CMD_PUP      = 0x0020,
++      /* IO drive strength 00=weak -> 11=strongest */
++      GLAMO_BASIC_MMC_EN_DR_STR0      = 0x0040,
++      GLAMO_BASIC_MMC_EN_DR_STR1      = 0x0080,
++      /* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
++      GLAMO_BASIC_MMC_EN_TCLK_DLYA0   = 0x0100,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYA1   = 0x0200,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYA2   = 0x0400,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYA3   = 0x0800,
++      /* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
++      GLAMO_BASIC_MMC_EN_TCLK_DLYB0   = 0x1000,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYB1   = 0x2000,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYB2   = 0x4000,
++      GLAMO_BASIC_MMC_EN_TCLK_DLYB3   = 0x8000,
++};
++
++enum glamo_reg_stat1_mmc {
++      /* command "counter" (really: toggle) */
++      GLAMO_STAT1_MMC_CMD_CTR = 0x8000,
++      /* engine is idle */
++      GLAMO_STAT1_MMC_IDLE    = 0x4000,
++      /* readback response is ready */
++      GLAMO_STAT1_MMC_RB_RRDY = 0x0200,
++      /* readback data is ready */
++      GLAMO_STAT1_MMC_RB_DRDY = 0x0100,
++      /* no response timeout */
++      GLAMO_STAT1_MMC_RTOUT   = 0x0020,
++      /* no data timeout */
++      GLAMO_STAT1_MMC_DTOUT   = 0x0010,
++      /* CRC error on block write */
++      GLAMO_STAT1_MMC_BWERR   = 0x0004,
++      /* CRC error on block read */
++      GLAMO_STAT1_MMC_BRERR   = 0x0002
++};
++
++enum glamo_reg_fire_mmc {
++      /* command "counter" (really: toggle)
++       * the STAT1 register reflects this so you can ensure you don't look
++       * at status for previous command
++       */
++      GLAMO_FIRE_MMC_CMD_CTR  = 0x8000,
++      /* sets kind of response expected */
++      GLAMO_FIRE_MMC_RES_MASK = 0x0700,
++      /* sets command type */
++      GLAMO_FIRE_MMC_TYP_MASK = 0x00C0,
++      /* sets command class */
++      GLAMO_FIRE_MMC_CLS_MASK = 0x000F,
++};
++
++enum glamo_fire_mmc_response_types {
++      GLAMO_FIRE_MMC_RSPT_R1  = 0x0000,
++      GLAMO_FIRE_MMC_RSPT_R1b = 0x0100,
++      GLAMO_FIRE_MMC_RSPT_R2  = 0x0200,
++      GLAMO_FIRE_MMC_RSPT_R3  = 0x0300,
++      GLAMO_FIRE_MMC_RSPT_R4  = 0x0400,
++      GLAMO_FIRE_MMC_RSPT_R5  = 0x0500,
++};
++
++enum glamo_fire_mmc_command_types {
++      /* broadcast, no response */
++      GLAMO_FIRE_MMC_CMDT_BNR = 0x0000,
++      /* broadcast, with response */
++      GLAMO_FIRE_MMC_CMDT_BR  = 0x0040,
++      /* addressed, no data */
++      GLAMO_FIRE_MMC_CMDT_AND = 0x0080,
++      /* addressed, with data */
++      GLAMO_FIRE_MMC_CMDT_AD  = 0x00C0,
++};
++
++enum glamo_fire_mmc_command_class {
++      /* "Stream Read" */
++      GLAMO_FIRE_MMC_CC_STRR  = 0x0000,
++      /* Single Block Read */
++      GLAMO_FIRE_MMC_CC_SBR   = 0x0001,
++      /* Multiple Block Read With Stop */
++      GLAMO_FIRE_MMC_CC_MBRS  = 0x0002,
++      /* Multiple Block Read No Stop */
++      GLAMO_FIRE_MMC_CC_MBRNS = 0x0003,
++      /* RESERVED for "Stream Write" */
++      GLAMO_FIRE_MMC_CC_STRW  = 0x0004,
++      /* "Stream Write" */
++      GLAMO_FIRE_MMC_CC_SBW   = 0x0005,
++      /* RESERVED for Multiple Block Write With Stop */
++      GLAMO_FIRE_MMC_CC_MBWS  = 0x0006,
++      /* Multiple Block Write No Stop */
++      GLAMO_FIRE_MMC_CC_MBWNS = 0x0007,
++      /* STOP command */
++      GLAMO_FIRE_MMC_CC_STOP  = 0x0008,
++      /* Cancel on Running Command */
++      GLAMO_FIRE_MMC_CC_CANCL = 0x0009,
++      /* "Basic Command" */
++      GLAMO_FIRE_MMC_CC_BASIC = 0x000a,
++};
++
++/* these are offsets from the start of the MMC register region */
++enum glamo_register_mmc {
++      /* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
++      GLAMO_REG_MMC_CMD_REG1  = 0x00,
++      /* MMC command, b15..0 = cmd arg b23 .. 8 */
++      GLAMO_REG_MMC_CMD_REG2  = 0x02,
++      /* MMC command, b15=start, b14=transmission,
++       * b13..8=cmd idx, b7..0=cmd arg b31..24
++       */
++      GLAMO_REG_MMC_CMD_REG3  = 0x04,
++      GLAMO_REG_MMC_CMD_FIRE  = 0x06,
++      GLAMO_REG_MMC_CMD_RSP1  = 0x10,
++      GLAMO_REG_MMC_CMD_RSP2  = 0x12,
++      GLAMO_REG_MMC_CMD_RSP3  = 0x14,
++      GLAMO_REG_MMC_CMD_RSP4  = 0x16,
++      GLAMO_REG_MMC_CMD_RSP5  = 0x18,
++      GLAMO_REG_MMC_CMD_RSP6  = 0x1a,
++      GLAMO_REG_MMC_CMD_RSP7  = 0x1c,
++      GLAMO_REG_MMC_CMD_RSP8  = 0x1e,
++      GLAMO_REG_MMC_RB_STAT1  = 0x20,
++      GLAMO_REG_MMC_RB_BLKCNT = 0x22,
++      GLAMO_REG_MMC_RB_BLKLEN = 0x24,
++      GLAMO_REG_MMC_BASIC     = 0x30,
++      GLAMO_REG_MMC_RDATADS1  = 0x34,
++      GLAMO_REG_MMC_RDATADS2  = 0x36,
++      GLAMO_REG_MMC_WDATADS1  = 0x38,
++      GLAMO_REG_MMC_WDATADS2  = 0x3a,
++      GLAMO_REG_MMC_DATBLKCNT = 0x3c,
++      GLAMO_REG_MMC_DATBLKLEN = 0x3e,
++      GLAMO_REG_MMC_TIMEOUT   = 0x40,
++
++};
++
++enum glamo_reg_clock_isp {
++      GLAMO_CLOCK_ISP_DG_I1CLK        = 0x0001,
++      GLAMO_CLOCK_ISP_EN_I1CLK        = 0x0002,
++      GLAMO_CLOCK_ISP_DG_CCLK         = 0x0004,
++      GLAMO_CLOCK_ISP_EN_CCLK         = 0x0008,
++      //
++      GLAMO_CLOCK_ISP_EN_SCLK         = 0x0020,
++      GLAMO_CLOCK_ISP_DG_M2CLK        = 0x0040,
++      GLAMO_CLOCK_ISP_EN_M2CLK        = 0x0080,
++      GLAMO_CLOCK_ISP_DG_M15CLK       = 0x0100,
++      GLAMO_CLOCK_ISP_EN_M15CLK       = 0x0200,
++      GLAMO_CLOCK_ISP1_RESET          = 0x1000,
++      GLAMO_CLOCK_ISP2_RESET          = 0x2000,
++};
++
++enum glamo_reg_clock_jpeg {
++      GLAMO_CLOCK_JPEG_DG_JCLK        = 0x0001,
++      GLAMO_CLOCK_JPEG_EN_JCLK        = 0x0002,
++      GLAMO_CLOCK_JPEG_DG_M3CLK       = 0x0004,
++      GLAMO_CLOCK_JPEG_EN_M3CLK       = 0x0008,
++      GLAMO_CLOCK_JPEG_RESET          = 0x1000,
++};
++
++enum glamo_reg_clock_2d {
++      GLAMO_CLOCK_2D_DG_GCLK          = 0x0001,
++      GLAMO_CLOCK_2D_EN_GCLK          = 0x0002,
++      GLAMO_CLOCK_2D_DG_M7CLK         = 0x0004,
++      GLAMO_CLOCK_2D_EN_M7CLK         = 0x0008,
++      GLAMO_CLOCK_2D_DG_M6CLK         = 0x0010,
++      GLAMO_CLOCK_2D_EN_M6CLK         = 0x0020,
++      GLAMO_CLOCK_2D_RESET            = 0x1000,
++      GLAMO_CLOCK_2D_CQ_RESET         = 0x2000,
++};
++
++enum glamo_reg_clock_3d {
++      GLAMO_CLOCK_3D_DG_ECLK          = 0x0001,
++      GLAMO_CLOCK_3D_EN_ECLK          = 0x0002,
++      GLAMO_CLOCK_3D_DG_RCLK          = 0x0004,
++      GLAMO_CLOCK_3D_EN_RCLK          = 0x0008,
++      GLAMO_CLOCK_3D_DG_M8CLK         = 0x0010,
++      GLAMO_CLOCK_3D_EN_M8CLK         = 0x0020,
++      GLAMO_CLOCK_3D_BACK_RESET       = 0x1000,
++      GLAMO_CLOCK_3D_FRONT_RESET      = 0x2000,
++};
++
++enum glamo_reg_clock_mpeg {
++      GLAMO_CLOCK_MPEG_DG_X0CLK       = 0x0001,
++      GLAMO_CLOCK_MPEG_EN_X0CLK       = 0x0002,
++      GLAMO_CLOCK_MPEG_DG_X1CLK       = 0x0004,
++      GLAMO_CLOCK_MPEG_EN_X1CLK       = 0x0008,
++      GLAMO_CLOCK_MPEG_DG_X2CLK       = 0x0010,
++      GLAMO_CLOCK_MPEG_EN_X2CLK       = 0x0020,
++      GLAMO_CLOCK_MPEG_DG_X3CLK       = 0x0040,
++      GLAMO_CLOCK_MPEG_EN_X3CLK       = 0x0080,
++      GLAMO_CLOCK_MPEG_DG_X4CLK       = 0x0100,
++      GLAMO_CLOCK_MPEG_EN_X4CLK       = 0x0200,
++      GLAMO_CLOCK_MPEG_DG_X6CLK       = 0x0400,
++      GLAMO_CLOCK_MPEG_EN_X6CLK       = 0x0800,
++      GLAMO_CLOCK_MPEG_ENC_RESET      = 0x1000,
++      GLAMO_CLOCK_MPEG_DEC_RESET      = 0x2000,
++};
++
++enum glamo_reg_clock51 {
++      GLAMO_CLOCK_GEN51_EN_DIV_MCLK   = 0x0001,
++      GLAMO_CLOCK_GEN51_EN_DIV_SCLK   = 0x0002,
++      GLAMO_CLOCK_GEN51_EN_DIV_JCLK   = 0x0004,
++      GLAMO_CLOCK_GEN51_EN_DIV_DCLK   = 0x0008,
++      GLAMO_CLOCK_GEN51_EN_DIV_DMCLK  = 0x0010,
++      GLAMO_CLOCK_GEN51_EN_DIV_DHCLK  = 0x0020,
++      GLAMO_CLOCK_GEN51_EN_DIV_GCLK   = 0x0040,
++      GLAMO_CLOCK_GEN51_EN_DIV_TCLK   = 0x0080,
++      /* FIXME: higher bits */
++};
++
++enum glamo_reg_hostbus2 {
++      GLAMO_HOSTBUS2_MMIO_EN_ISP      = 0x0001,
++      GLAMO_HOSTBUS2_MMIO_EN_JPEG     = 0x0002,
++      GLAMO_HOSTBUS2_MMIO_EN_MPEG     = 0x0004,
++      GLAMO_HOSTBUS2_MMIO_EN_LCD      = 0x0008,
++      GLAMO_HOSTBUS2_MMIO_EN_MMC      = 0x0010,
++      GLAMO_HOSTBUS2_MMIO_EN_MICROP0  = 0x0020,
++      GLAMO_HOSTBUS2_MMIO_EN_MICROP1  = 0x0040,
++      GLAMO_HOSTBUS2_MMIO_EN_CQ       = 0x0080,
++      GLAMO_HOSTBUS2_MMIO_EN_RISC     = 0x0100,
++      GLAMO_HOSTBUS2_MMIO_EN_2D       = 0x0200,
++      GLAMO_HOSTBUS2_MMIO_EN_3D       = 0x0400,
++};
++
++/* LCD Controller */
++
++#define REG_LCD(x)    (x)
++enum glamo_reg_lcd {
++      GLAMO_REG_LCD_MODE1             = REG_LCD(0x00),
++      GLAMO_REG_LCD_MODE2             = REG_LCD(0x02),
++      GLAMO_REG_LCD_MODE3             = REG_LCD(0x04),
++      GLAMO_REG_LCD_WIDTH             = REG_LCD(0x06),
++      GLAMO_REG_LCD_HEIGHT            = REG_LCD(0x08),
++      GLAMO_REG_LCD_POLARITY          = REG_LCD(0x0a),
++      GLAMO_REG_LCD_A_BASE1           = REG_LCD(0x0c),
++      GLAMO_REG_LCD_A_BASE2           = REG_LCD(0x0e),
++      GLAMO_REG_LCD_B_BASE1           = REG_LCD(0x10),
++      GLAMO_REG_LCD_B_BASE2           = REG_LCD(0x12),
++      GLAMO_REG_LCD_C_BASE1           = REG_LCD(0x14),
++      GLAMO_REG_LCD_C_BASE2           = REG_LCD(0x16),
++      GLAMO_REG_LCD_PITCH             = REG_LCD(0x18),
++      /* RES */
++      GLAMO_REG_LCD_HORIZ_TOTAL       = REG_LCD(0x1c),
++      /* RES */
++      GLAMO_REG_LCD_HORIZ_RETR_START  = REG_LCD(0x20),
++      /* RES */
++      GLAMO_REG_LCD_HORIZ_RETR_END    = REG_LCD(0x24),
++      /* RES */
++      GLAMO_REG_LCD_HORIZ_DISP_START  = REG_LCD(0x28),
++      /* RES */
++      GLAMO_REG_LCD_HORIZ_DISP_END    = REG_LCD(0x2c),
++      /* RES */
++      GLAMO_REG_LCD_VERT_TOTAL        = REG_LCD(0x30),
++      /* RES */
++      GLAMO_REG_LCD_VERT_RETR_START   = REG_LCD(0x34),
++      /* RES */
++      GLAMO_REG_LCD_VERT_RETR_END     = REG_LCD(0x38),
++      /* RES */
++      GLAMO_REG_LCD_VERT_DISP_START   = REG_LCD(0x3c),
++      /* RES */
++      GLAMO_REG_LCD_VERT_DISP_END     = REG_LCD(0x40),
++      /* RES */
++      GLAMO_REG_LCD_POL               = REG_LCD(0x44),
++      GLAMO_REG_LCD_DATA_START        = REG_LCD(0x46),
++      GLAMO_REG_LCD_FRATE_CONTRO      = REG_LCD(0x48),
++      GLAMO_REG_LCD_DATA_CMD_HDR      = REG_LCD(0x4a),
++      GLAMO_REG_LCD_SP_START          = REG_LCD(0x4c),
++      GLAMO_REG_LCD_SP_END            = REG_LCD(0x4e),
++      GLAMO_REG_LCD_CURSOR_BASE1      = REG_LCD(0x50),
++      GLAMO_REG_LCD_CURSOR_BASE2      = REG_LCD(0x52),
++      GLAMO_REG_LCD_CURSOR_PITCH      = REG_LCD(0x54),
++      GLAMO_REG_LCD_CURSOR_X_SIZE     = REG_LCD(0x56),
++      GLAMO_REG_LCD_CURSOR_Y_SIZE     = REG_LCD(0x58),
++      GLAMO_REG_LCD_CURSOR_X_POS      = REG_LCD(0x5a),
++      GLAMO_REG_LCD_CURSOR_Y_POS      = REG_LCD(0x5c),
++      GLAMO_REG_LCD_CURSOR_PRESET     = REG_LCD(0x5e),
++      GLAMO_REG_LCD_CURSOR_FG_COLOR   = REG_LCD(0x60),
++      /* RES */
++      GLAMO_REG_LCD_CURSOR_BG_COLOR   = REG_LCD(0x64),
++      /* RES */
++      GLAMO_REG_LCD_CURSOR_DST_COLOR  = REG_LCD(0x68),
++      /* RES */
++      GLAMO_REG_LCD_STATUS1           = REG_LCD(0x80),
++      GLAMO_REG_LCD_STATUS2           = REG_LCD(0x82),
++      GLAMO_REG_LCD_STATUS3           = REG_LCD(0x84),
++      GLAMO_REG_LCD_STATUS4           = REG_LCD(0x86),
++      /* RES */
++      GLAMO_REG_LCD_COMMAND1          = REG_LCD(0xa0),
++      GLAMO_REG_LCD_COMMAND2          = REG_LCD(0xa2),
++      /* RES */
++      GLAMO_REG_LCD_WFORM_DELAY1      = REG_LCD(0xb0),
++      GLAMO_REG_LCD_WFORM_DELAY2      = REG_LCD(0xb2),
++      /* RES */
++      GLAMO_REG_LCD_GAMMA_CORR        = REG_LCD(0x100),
++      /* RES */
++      GLAMO_REG_LCD_GAMMA_R_ENTRY01   = REG_LCD(0x110),
++      GLAMO_REG_LCD_GAMMA_R_ENTRY23   = REG_LCD(0x112),
++      GLAMO_REG_LCD_GAMMA_R_ENTRY45   = REG_LCD(0x114),
++      GLAMO_REG_LCD_GAMMA_R_ENTRY67   = REG_LCD(0x116),
++      GLAMO_REG_LCD_GAMMA_R_ENTRY8    = REG_LCD(0x118),
++      /* RES */
++      GLAMO_REG_LCD_GAMMA_G_ENTRY01   = REG_LCD(0x130),
++      GLAMO_REG_LCD_GAMMA_G_ENTRY23   = REG_LCD(0x132),
++      GLAMO_REG_LCD_GAMMA_G_ENTRY45   = REG_LCD(0x134),
++      GLAMO_REG_LCD_GAMMA_G_ENTRY67   = REG_LCD(0x136),
++      GLAMO_REG_LCD_GAMMA_G_ENTRY8    = REG_LCD(0x138),
++      /* RES */
++      GLAMO_REG_LCD_GAMMA_B_ENTRY01   = REG_LCD(0x150),
++      GLAMO_REG_LCD_GAMMA_B_ENTRY23   = REG_LCD(0x152),
++      GLAMO_REG_LCD_GAMMA_B_ENTRY45   = REG_LCD(0x154),
++      GLAMO_REG_LCD_GAMMA_B_ENTRY67   = REG_LCD(0x156),
++      GLAMO_REG_LCD_GAMMA_B_ENTRY8    = REG_LCD(0x158),
++      /* RES */
++      GLAMO_REG_LCD_SRAM_DRIVING1     = REG_LCD(0x160),
++      GLAMO_REG_LCD_SRAM_DRIVING2     = REG_LCD(0x162),
++      GLAMO_REG_LCD_SRAM_DRIVING3     = REG_LCD(0x164),
++};
++
++enum glamo_reg_lcd_mode1 {
++      GLAMO_LCD_MODE1_PWRSAVE         = 0x0001,
++      GLAMO_LCD_MODE1_PARTIAL_PRT     = 0x0002,
++      GLAMO_LCD_MODE1_HWFLIP          = 0x0004,
++      GLAMO_LCD_MODE1_LCD2            = 0x0008,
++      /* RES */
++      GLAMO_LCD_MODE1_PARTIAL_MODE    = 0x0020,
++      GLAMO_LCD_MODE1_CURSOR_DSTCOLOR = 0x0040,
++      GLAMO_LCD_MODE1_PARTIAL_ENABLE  = 0x0080,
++      GLAMO_LCD_MODE1_TVCLK_IN_ENABLE = 0x0100,
++      GLAMO_LCD_MODE1_HSYNC_HIGH_ACT  = 0x0200,
++      GLAMO_LCD_MODE1_VSYNC_HIGH_ACT  = 0x0400,
++      GLAMO_LCD_MODE1_HSYNC_FLIP      = 0x0800,
++      GLAMO_LCD_MODE1_GAMMA_COR_EN    = 0x1000,
++      GLAMO_LCD_MODE1_DITHER_EN       = 0x2000,
++      GLAMO_LCD_MODE1_CURSOR_EN       = 0x4000,
++      GLAMO_LCD_MODE1_ROTATE_EN       = 0x8000,
++};
++
++enum glamo_reg_lcd_mode2 {
++      GLAMO_LCD_MODE2_CRC_CHECK_EN    = 0x0001,
++      GLAMO_LCD_MODE2_DCMD_PER_LINE   = 0x0002,
++      GLAMO_LCD_MODE2_NOUSE_BDEF      = 0x0004,
++      GLAMO_LCD_MODE2_OUT_POS_MODE    = 0x0008,
++      GLAMO_LCD_MODE2_FRATE_CTRL_EN   = 0x0010,
++      GLAMO_LCD_MODE2_SINGLE_BUFFER   = 0x0020,
++      GLAMO_LCD_MODE2_SER_LSB_TO_MSB  = 0x0040,
++      /* FIXME */
++};
++
++enum glamo_reg_lcd_mode3 {
++      /* LCD color source data format */
++      GLAMO_LCD_SRC_RGB565            = 0x0000,
++      GLAMO_LCD_SRC_ARGB1555          = 0x4000,
++      GLAMO_LCD_SRC_ARGB4444          = 0x8000,
++      /* interface type */
++      GLAMO_LCD_MODE3_LCD             = 0x1000,
++      GLAMO_LCD_MODE3_RGB             = 0x0800,
++      GLAMO_LCD_MODE3_CPU             = 0x0000,
++      /* mode */
++      GLAMO_LCD_MODE3_RGB332          = 0x0000,
++      GLAMO_LCD_MODE3_RGB444          = 0x0100,
++      GLAMO_LCD_MODE3_RGB565          = 0x0200,
++      GLAMO_LCD_MODE3_RGB666          = 0x0300,
++      /* depth */
++      GLAMO_LCD_MODE3_6BITS           = 0x0000,
++      GLAMO_LCD_MODE3_8BITS           = 0x0010,
++      GLAMO_LCD_MODE3_9BITS           = 0x0020,
++      GLAMO_LCD_MODE3_16BITS          = 0x0030,
++      GLAMO_LCD_MODE3_18BITS          = 0x0040,
++};
++
++enum glamo_lcd_rot_mode {
++        GLAMO_LCD_ROT_MODE_0            = 0x0000,
++        GLAMO_LCD_ROT_MODE_180          = 0x2000,
++        GLAMO_LCD_ROT_MODE_MIRROR       = 0x4000,
++        GLAMO_LCD_ROT_MODE_FLIP         = 0x6000,
++        GLAMO_LCD_ROT_MODE_90           = 0x8000,
++        GLAMO_LCD_ROT_MODE_270          = 0xa000,
++};
++#define GLAMO_LCD_ROT_MODE_MASK         0xe000
++
++enum glamo_lcd_cmd_type {
++      GLAMO_LCD_CMD_TYPE_DISP         = 0x0000,
++      GLAMO_LCD_CMD_TYPE_PARALLEL     = 0x4000,
++      GLAMO_LCD_CMD_TYPE_SERIAL       = 0x8000,
++      GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT= 0xc000,
++};
++#define GLAMO_LCD_CMD_TYPE_MASK               0xc000
++
++enum glamo_lcd_cmds {
++      GLAMO_LCD_CMD_DATA_DISP_FIRE    = 0x00,
++      GLAMO_LCD_CMD_DATA_DISP_SYNC    = 0x01,         /* RGB only */
++      /* switch to command mode, no display */
++      GLAMO_LCD_CMD_DATA_FIRE_NO_DISP = 0x02,
++      /* display until VSYNC, switch to command */
++      GLAMO_LCD_CMD_DATA_FIRE_VSYNC   = 0x11,
++      /* display until HSYNC, switch to command */
++      GLAMO_LCD_CMD_DATA_FIRE_HSYNC   = 0x12,
++      /* display until VSYNC, 1 black frame, VSYNC, switch to command */
++      GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B = 0x13,
++      /* don't care about display and switch to command */
++      GLAMO_LCD_CMD_DATA_FIRE_FREE    = 0x14,         /* RGB only */
++      /* don't care about display, keep data display but disable data,
++       * and switch to command */
++      GLAMO_LCD_CMD_DATA_FIRE_FREE_D  = 0x15,         /* RGB only */
++};
++
++enum glamo_core_revisions {
++      GLAMO_CORE_REV_A0               = 0x0000,
++      GLAMO_CORE_REV_A1               = 0x0001,
++      GLAMO_CORE_REV_A2               = 0x0002,
++      GLAMO_CORE_REV_A3               = 0x0003,
++};
++
++#endif /* _GLAMO_REGS_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-spi-gpio.c linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-spi-gpio.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/glamo-spi-gpio.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/glamo-spi-gpio.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,278 @@
++/*
++ * Copyright (C) 2007 Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *
++ * Smedia Glamo GPIO based SPI driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This driver currently only implements a minimum subset of the hardware
++ * features, esp. those features that are required to drive the jbt6k74
++ * LCM controller asic in the TD028TTEC1 LCM.
++ *
++*/
++
++#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/glamo.h>
++
++#include <linux/glamofb.h>
++
++#include <mach/hardware.h>
++
++#include "glamo-core.h"
++#include "glamo-regs.h"
++
++struct glamo_spigpio {
++      struct spi_bitbang              bitbang;
++      struct spi_master               *master;
++      struct glamo_spigpio_info       *info;
++      struct glamo_core               *glamo;
++};
++
++static inline struct glamo_spigpio *to_sg(struct spi_device *spi)
++{
++      return dev_get_drvdata(&spi->master->dev);
++}
++
++static inline void setsck(struct spi_device *dev, int on)
++{
++      struct glamo_spigpio *sg = to_sg(dev);
++      glamo_gpio_setpin(sg->glamo, sg->info->pin_clk, on ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int on)
++{
++      struct glamo_spigpio *sg = to_sg(dev);
++      glamo_gpio_setpin(sg->glamo, sg->info->pin_mosi, on ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++      struct glamo_spigpio *sg = to_sg(dev);
++      if (sg->info->pin_miso)
++              return glamo_gpio_getpin(sg->glamo, sg->info->pin_miso) ? 1 : 0;
++      else
++              return 0;
++}
++
++#define spidelay(x) ndelay(x)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 glamo_spigpio_txrx_mode0(struct spi_device *spi,
++                                  unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 glamo_spigpio_txrx_mode1(struct spi_device *spi,
++                                  unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 glamo_spigpio_txrx_mode2(struct spi_device *spi,
++                                  unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 glamo_spigpio_txrx_mode3(struct spi_device *spi,
++                                  unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++
++#if 0
++static int glamo_spigpio_setupxfer(struct spi_device *spi,
++                                 struct spi_transfer *t)
++{
++      struct glamo_spi *gs = to_sg(spi);
++      unsigned int bpw;
++
++      bpw = t ? t->bits_per_word : spi->bits_per_word;
++
++      if (bpw != 9 && bpw != 8) {
++              dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
++              return -EINVAL;
++      }
++
++      return 0;
++}
++#endif
++
++static void glamo_spigpio_chipsel(struct spi_device *spi, int value)
++{
++      struct glamo_spigpio *gs = to_sg(spi);
++#if 0
++      dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
++              value, spi, gs, gs->info, gs->info->glamo);
++#endif
++      glamo_gpio_setpin(gs->glamo, gs->info->pin_cs, value ? 0 : 1);
++}
++
++
++static int glamo_spigpio_probe(struct platform_device *pdev)
++{
++      struct spi_master *master;
++      struct glamo_spigpio *sp;
++      int ret;
++
++      master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spigpio));
++      if (master == NULL) {
++              dev_err(&pdev->dev, "failed to allocate spi master\n");
++              ret = -ENOMEM;
++              goto err;
++      }
++
++      sp = spi_master_get_devdata(master);
++      platform_set_drvdata(pdev, sp);
++      sp->info = pdev->dev.platform_data;
++      if (!sp->info) {
++              dev_err(&pdev->dev, "can't operate without platform data\n");
++              ret = -EIO;
++              goto err_no_pdev;
++      }
++
++      master->num_chipselect = 1;
++      master->bus_num = 2; /* FIXME: use dynamic number */
++
++      sp->master = spi_master_get(master);
++      sp->glamo = sp->info->glamo;
++
++      sp->bitbang.master = sp->master;
++      sp->bitbang.chipselect = glamo_spigpio_chipsel;
++      sp->bitbang.txrx_word[SPI_MODE_0] = glamo_spigpio_txrx_mode0;
++      sp->bitbang.txrx_word[SPI_MODE_1] = glamo_spigpio_txrx_mode1;
++      sp->bitbang.txrx_word[SPI_MODE_2] = glamo_spigpio_txrx_mode2;
++      sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3;
++
++      /* set state of spi pins */
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0);
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0);
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1);
++
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk);
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi);
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs);
++      if (sp->info->pin_miso)
++              glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso);
++
++      /* bring the LCM panel out of reset if it isn't already */
++
++      glamo_gpio_setpin(sp->glamo, GLAMO_GPIO4, 1);
++      glamo_gpio_cfgpin(sp->glamo, GLAMO_GPIO4_OUTPUT);
++      msleep(90);
++
++#if 0
++      sp->dev = &pdev->dev;
++
++      sp->bitbang.setup_transfer = glamo_spi_setupxfer;
++      sp->bitbang.txrx_bufs = glamo_spi_txrx;
++      sp->bitbang.master->setup = glamo_spi_setup;
++#endif
++
++      dev_set_drvdata(&sp->master->dev, sp);
++
++      ret = spi_bitbang_start(&sp->bitbang);
++      if (ret)
++              goto err_no_bitbang;
++
++      return 0;
++
++err_no_bitbang:
++      platform_set_drvdata(pdev, NULL);
++err_no_pdev:
++      spi_master_put(sp->bitbang.master);
++err:
++      return ret;
++
++}
++
++static int glamo_spigpio_remove(struct platform_device *pdev)
++{
++      struct glamo_spigpio *sp = platform_get_drvdata(pdev);
++
++      spi_bitbang_stop(&sp->bitbang);
++      spi_master_put(sp->bitbang.master);
++
++      return 0;
++}
++
++/*#define glamo_spigpio_suspend NULL
++#define glamo_spigpio_resume NULL
++*/
++
++
++#ifdef CONFIG_PM
++static int glamo_spigpio_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      return 0;
++}
++
++static int glamo_spigpio_resume(struct platform_device *pdev)
++{
++      struct glamo_spigpio *sp = platform_get_drvdata(pdev);
++
++      if (!sp)
++              return 0;
++
++      /* set state of spi pins */
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0);
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0);
++      glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1);
++
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk);
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi);
++      glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs);
++      if (sp->info->pin_miso)
++              glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso);
++
++      return 0;
++}
++#endif
++
++static struct platform_driver glamo_spi_drv = {
++      .probe          = glamo_spigpio_probe,
++      .remove         = glamo_spigpio_remove,
++#ifdef CONFIG_PM
++      .suspend_late   = glamo_spigpio_suspend,
++      .resume_early   = glamo_spigpio_resume,
++#endif
++      .driver         = {
++              .name   = "glamo-spi-gpio",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init glamo_spi_init(void)
++{
++      return platform_driver_register(&glamo_spi_drv);
++}
++
++static void __exit glamo_spi_exit(void)
++{
++      platform_driver_unregister(&glamo_spi_drv);
++}
++
++module_init(glamo_spi_init);
++module_exit(glamo_spi_exit);
++
++MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/Kconfig linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/Kconfig    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/Kconfig 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,57 @@
++config MFD_GLAMO
++      bool "Smedia Glamo 336x/337x support"
++      help
++        This enables the core driver for the Smedia Glamo 336x/337x
++        multi-function device.  It includes irq_chip demultiplex as
++        well as clock / power management and GPIO support.
++
++config MFD_GLAMO_FB
++      tristate "Smedia Glamo 336x/337x framebuffer support"
++      depends on FB && MFD_GLAMO
++      select FB_CFB_FILLRECT
++      select FB_CFB_COPYAREA
++      select FB_CFB_IMAGEBLIT
++      help
++        Frame buffer driver for the LCD controller in the Smedia Glamo
++        336x/337x.
++
++        This driver is also available as a module ( = code which can be
++        inserted and removed from the running kernel whenever you want). The
++        module will be called glamofb. If you want to compile it as a module,
++        say M here and read <file:Documentation/modules.txt>.
++
++        If unsure, say N.
++
++config MFD_GLAMO_FB_XGLAMO_WORKAROUND
++      bool "Smedia Glamo 336x/337x Xglamo rotation workaround"
++      depends on MFD_GLAMO_FB
++      help
++        This is a workaround for a Xglamo bug. This should be fixed
++        in Xglamo and not in kernel space.
++
++        If unsure, say N.
++
++
++config MFD_GLAMO_SPI_GPIO
++       tristate "Glamo GPIO SPI bitbang support"
++       depends on MFD_GLAMO
++       help
++         Enable a bitbanging SPI adapter driver for the Smedia Glamo.
++
++config MFD_GLAMO_SPI_FB
++       tristate "Glamo LCM control channel SPI support"
++       depends on MFD_GLAMO_FB
++       help
++         Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM
++       control channel.  This SPI interface is frequently used to
++       interconnect the LCM control interface.
++
++config MFD_GLAMO_MCI
++      tristate "Glamo S3C SD/MMC Card Interface support"
++      depends on MFD_GLAMO && MMC
++      help
++        This selects a driver for the MCI interface found in
++        the S-Media GLAMO chip, as used in Openmoko
++        neo1973 GTA-02.
++
++        If unsure, say N.
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/glamo/Makefile linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/mfd/glamo/Makefile   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/glamo/Makefile        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,12 @@
++#
++# Makefile for the Smedia Glamo framebuffer driver
++#
++
++obj-$(CONFIG_MFD_GLAMO)                       += glamo-core.o glamo-gpio.o
++obj-$(CONFIG_MFD_GLAMO_SPI)           += glamo-spi.o
++obj-$(CONFIG_MFD_GLAMO_SPI_GPIO)      += glamo-spi-gpio.o
++
++obj-$(CONFIG_MFD_GLAMO_FB)            += glamo-fb.o
++obj-$(CONFIG_MFD_GLAMO_SPI_FB)                += glamo-lcm-spi.o
++obj-$(CONFIG_MFD_GLAMO_MCI)           += glamo-mci.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/Kconfig linux-2.6.29-rc3.owrt.om/drivers/mfd/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/mfd/Kconfig  2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/Kconfig       2009-05-10 22:28:00.000000000 +0200
+@@ -240,6 +240,33 @@
+        Say yes here if you want to include support GPIO for pins on
+        the PCF50633 chip.
++
++config MFD_PCF50606
++        tristate "Support for NXP PCF50606"
++        depends on I2C
++        help
++          Say yes here if you have NXP PCF50606 chip on your board.
++          This core driver provides register access and IRQ handling
++          facilities, and registers devices for the various functions
++          so that function-specific drivers can bind to them.
++
++config PCF50606_ADC
++        tristate "Support for NXP PCF50606 ADC"
++        depends on MFD_PCF50606
++        help
++         Say yes here if you want to include support for ADC in the
++         NXP PCF50606 chip.
++
++config PCF50606_GPO
++        tristate "Support for NXP PCF50606 GPO"
++        depends on MFD_PCF50606
++        help
++         Say yes here if you want to include support GPO for pins on
++         the PCF50606 chip.
++
++
++source "drivers/mfd/glamo/Kconfig"
++
+ endmenu
+ menu "Multimedia Capabilities Port drivers"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/Makefile linux-2.6.29-rc3.owrt.om/drivers/mfd/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/mfd/Makefile 2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/Makefile      2009-05-10 22:28:00.000000000 +0200
+@@ -4,6 +4,7 @@
+ obj-$(CONFIG_MFD_SM501)               += sm501.o
+ obj-$(CONFIG_MFD_ASIC3)               += asic3.o
++obj-$(CONFIG_MFD_GLAMO)               += glamo/
+ obj-$(CONFIG_HTC_EGPIO)               += htc-egpio.o
+ obj-$(CONFIG_HTC_PASIC3)      += htc-pasic3.o
+@@ -40,4 +41,8 @@
+ obj-$(CONFIG_MFD_PCF50633)    += pcf50633-core.o
+ obj-$(CONFIG_PCF50633_ADC)    += pcf50633-adc.o
+-obj-$(CONFIG_PCF50633_GPIO)   += pcf50633-gpio.o
+\ No newline at end of file
++obj-$(CONFIG_PCF50633_GPIO)   += pcf50633-gpio.o
++
++obj-$(CONFIG_MFD_PCF50606)    += pcf50606-core.o
++obj-$(CONFIG_PCF50606_ADC)    += pcf50606-adc.o
++obj-$(CONFIG_PCF50606_GPO)    += pcf50606-gpo.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-adc.c linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-adc.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-adc.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-adc.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,279 @@
++/* Philips PCF50606 ADC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green, Werner Almesberger and Matt Hsu
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  NOTE: This driver does not yet support subtractive ADC mode, which means
++ *  you can do only one measurement per read request.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/adc.h>
++
++struct pcf50606_adc_request {
++      int mux;
++      int result;
++      void (*callback)(struct pcf50606 *, void *, int);
++      void *callback_param;
++
++      /* Used in case of sync requests */
++      struct completion completion;
++
++};
++
++#define PCF50606_MAX_ADC_FIFO_DEPTH 8
++
++struct pcf50606_adc {
++      struct pcf50606 *pcf;
++
++      /* Private stuff */
++      struct pcf50606_adc_request *queue[PCF50606_MAX_ADC_FIFO_DEPTH];
++      int queue_head;
++      int queue_tail;
++      struct mutex queue_mutex;
++};
++
++static inline struct pcf50606_adc *__to_adc(struct pcf50606 *pcf)
++{
++      return platform_get_drvdata(pcf->adc_pdev);
++}
++
++static void adc_setup(struct pcf50606 *pcf, int channel)
++{
++      channel &= PCF50606_ADCC2_ADCMUX_MASK;
++
++      /* start ADC conversion of selected channel */
++      pcf50606_reg_write(pcf, PCF50606_REG_ADCC2, channel |
++                  PCF50606_ADCC2_ADCSTART | PCF50606_ADCC2_RES_10BIT);
++
++}
++
++static void trigger_next_adc_job_if_any(struct pcf50606 *pcf)
++{
++      struct pcf50606_adc *adc = __to_adc(pcf);
++      int head, tail;
++
++      mutex_lock(&adc->queue_mutex);
++
++      head = adc->queue_head;
++      tail = adc->queue_tail;
++
++      if (!adc->queue[head])
++              goto out;
++
++      adc_setup(pcf, adc->queue[head]->mux);
++out:
++      mutex_unlock(&adc->queue_mutex);
++}
++
++static int
++adc_enqueue_request(struct pcf50606 *pcf, struct pcf50606_adc_request *req)
++{
++      struct pcf50606_adc *adc = __to_adc(pcf);
++      int head, tail;
++
++      mutex_lock(&adc->queue_mutex);
++      head = adc->queue_head;
++      tail = adc->queue_tail;
++
++      if (adc->queue[tail]) {
++              mutex_unlock(&adc->queue_mutex);
++              return -EBUSY;
++      }
++
++      adc->queue[tail] = req;
++
++      adc->queue_tail =
++              (tail + 1) & (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
++
++      mutex_unlock(&adc->queue_mutex);
++
++      trigger_next_adc_job_if_any(pcf);
++
++      return 0;
++}
++
++static void
++pcf50606_adc_sync_read_callback(struct pcf50606 *pcf, void *param, int result)
++{
++      struct pcf50606_adc_request *req;
++
++      /*We know here that the passed param is an adc_request object */
++      req = (struct pcf50606_adc_request *)param;
++
++      req->result = result;
++      complete(&req->completion);
++}
++
++int pcf50606_adc_sync_read(struct pcf50606 *pcf, int mux)
++{
++
++      struct pcf50606_adc_request *req;
++      int result;
++
++      /* req is freed when the result is ready, in irq handler*/
++      req = kzalloc(sizeof(*req), GFP_KERNEL);
++      if (!req)
++              return -ENOMEM;
++
++      req->mux = mux;
++      req->callback =  pcf50606_adc_sync_read_callback;
++      req->callback_param = req;
++      init_completion(&req->completion);
++
++      adc_enqueue_request(pcf, req);
++
++      if (wait_for_completion_timeout(&req->completion, 5 * HZ) == 5 * HZ) {
++              dev_err(pcf->dev, "ADC read timed out \n");
++      }
++
++      result = req->result;
++
++      return result;
++}
++EXPORT_SYMBOL_GPL(pcf50606_adc_sync_read);
++
++int pcf50606_adc_async_read(struct pcf50606 *pcf, int mux,
++                           void (*callback)(struct pcf50606 *, void *, int),
++                           void *callback_param)
++{
++      struct pcf50606_adc_request *req;
++
++      /* req is freed when the result is ready, in pcf50606_work*/
++      req = kmalloc(sizeof(*req), GFP_KERNEL);
++      if (!req)
++              return -ENOMEM;
++
++      req->mux = mux;
++      req->callback = callback;
++      req->callback_param = callback_param;
++
++      adc_enqueue_request(pcf, req);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_adc_async_read);
++
++static int adc_result(struct pcf50606 *pcf)
++{
++      u16 ret = (pcf50606_reg_read(pcf, PCF50606_REG_ADCS1) << 2) |
++                      (pcf50606_reg_read(pcf, PCF50606_REG_ADCS2) & 0x03);
++
++      dev_dbg(pcf->dev, "adc result = %d\n", ret);
++
++      return ret;
++}
++
++static void pcf50606_adc_irq(int irq, void *data)
++{
++      struct pcf50606_adc *adc = data;
++      struct pcf50606 *pcf = adc->pcf;
++      struct pcf50606_adc_request *req;
++      int head;
++
++      mutex_lock(&adc->queue_mutex);
++      head = adc->queue_head;
++
++      req = adc->queue[head];
++      if (WARN_ON(!req)) {
++              dev_err(pcf->dev, "pcf50606-adc irq: ADC queue empty!\n");
++              mutex_unlock(&adc->queue_mutex);
++              return;
++      }
++
++      adc->queue[head] = NULL;
++      adc->queue_head = (head + 1) &
++                                    (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
++
++      mutex_unlock(&adc->queue_mutex);
++
++      req->callback(pcf, req->callback_param, adc_result(pcf));
++      kfree(req);
++
++      trigger_next_adc_job_if_any(pcf);
++}
++
++static int __devinit pcf50606_adc_probe(struct platform_device *pdev)
++{
++      struct pcf50606_subdev_pdata *pdata = pdev->dev.platform_data;
++      struct pcf50606_adc *adc;
++
++      adc = kzalloc(sizeof(*adc), GFP_KERNEL);
++      if (!adc)
++              return -ENOMEM;
++
++      adc->pcf = pdata->pcf;
++      platform_set_drvdata(pdev, adc);
++
++      pcf50606_register_irq(pdata->pcf, PCF50606_IRQ_ADCRDY,
++                                      pcf50606_adc_irq, adc);
++
++      mutex_init(&adc->queue_mutex);
++
++      return 0;
++}
++
++static int __devexit pcf50606_adc_remove(struct platform_device *pdev)
++{
++      struct pcf50606_adc *adc = platform_get_drvdata(pdev);
++      int i, head;
++
++      pcf50606_free_irq(adc->pcf, PCF50606_IRQ_ADCRDY);
++
++      mutex_lock(&adc->queue_mutex);
++      head = adc->queue_head;
++
++      if (WARN_ON(adc->queue[head]))
++              dev_err(adc->pcf->dev,
++                      "adc driver removed with request pending\n");
++
++      for (i = 0; i < PCF50606_MAX_ADC_FIFO_DEPTH; i++)
++              kfree(adc->queue[i]);
++
++      mutex_unlock(&adc->queue_mutex);
++      kfree(adc);
++
++      return 0;
++}
++
++struct platform_driver pcf50606_adc_driver = {
++      .driver = {
++              .name = "pcf50606-adc",
++      },
++      .probe = pcf50606_adc_probe,
++      .remove = __devexit_p(pcf50606_adc_remove),
++};
++
++static int __init pcf50606_adc_init(void)
++{
++              return platform_driver_register(&pcf50606_adc_driver);
++}
++module_init(pcf50606_adc_init);
++
++static void __exit pcf50606_adc_exit(void)
++{
++              platform_driver_unregister(&pcf50606_adc_driver);
++}
++module_exit(pcf50606_adc_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 adc driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-adc");
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-core.c linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-core.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-core.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-core.c       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,680 @@
++/* Philips PCF50606 Power Management Unit (PMU) driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ *        Matt Hsu <matt@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/sysfs.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/irq.h>
++#include <linux/device.h>
++#include <linux/module.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++static int __pcf50606_read(struct pcf50606 *pcf, u8 reg, int num, u8 *data)
++{
++      int ret;
++
++      ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
++                              num, data);
++      if (ret < 0)
++              dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
++
++      return ret;
++}
++
++static int __pcf50606_write(struct pcf50606 *pcf, u8 reg, int num, u8 *data)
++{
++      int ret;
++
++      ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
++                              num, data);
++      if (ret < 0)
++              dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
++
++      return ret;
++
++}
++
++/* Read a block of upto 32 regs  */
++int pcf50606_read_block(struct pcf50606 *pcf, u8 reg,
++                                      int nr_regs, u8 *data)
++{
++      int ret;
++
++      mutex_lock(&pcf->lock);
++      ret = __pcf50606_read(pcf, reg, nr_regs, data);
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_read_block);
++
++/* Write a block of upto 32 regs  */
++int pcf50606_write_block(struct pcf50606 *pcf , u8 reg,
++                                      int nr_regs, u8 *data)
++{
++      int ret;
++
++      mutex_lock(&pcf->lock);
++      ret = __pcf50606_write(pcf, reg, nr_regs, data);
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_write_block);
++
++u8 pcf50606_reg_read(struct pcf50606 *pcf, u8 reg)
++{
++      u8 val;
++
++      mutex_lock(&pcf->lock);
++      __pcf50606_read(pcf, reg, 1, &val);
++      mutex_unlock(&pcf->lock);
++
++      return val;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_read);
++
++int pcf50606_reg_write(struct pcf50606 *pcf, u8 reg, u8 val)
++{
++      int ret;
++
++      mutex_lock(&pcf->lock);
++      ret = __pcf50606_write(pcf, reg, 1, &val);
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_write);
++
++int pcf50606_reg_set_bit_mask(struct pcf50606 *pcf, u8 reg, u8 mask, u8 val)
++{
++      int ret;
++      u8 tmp;
++
++      val &= mask;
++
++      mutex_lock(&pcf->lock);
++      ret = __pcf50606_read(pcf, reg, 1, &tmp);
++      if (ret < 0)
++              goto out;
++
++      tmp &= ~mask;
++      tmp |= val;
++      ret = __pcf50606_write(pcf, reg, 1, &tmp);
++
++out:
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_set_bit_mask);
++
++int pcf50606_reg_clear_bits(struct pcf50606 *pcf, u8 reg, u8 val)
++{
++      int ret;
++      u8 tmp;
++
++      mutex_lock(&pcf->lock);
++      ret = __pcf50606_read(pcf, reg, 1, &tmp);
++      if (ret < 0)
++              goto out;
++
++      tmp &= ~val;
++      ret = __pcf50606_write(pcf, reg, 1, &tmp);
++
++out:
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_clear_bits);
++
++/* sysfs attributes */
++static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct pcf50606 *pcf = dev_get_drvdata(dev);
++      u8 dump[16];
++      int n, n1, idx = 0;
++      char *buf1 = buf;
++      static u8 address_no_read[] = { /* must be ascending */
++              PCF50606_REG_INT1,
++              PCF50606_REG_INT2,
++              PCF50606_REG_INT3,
++              0 /* terminator */
++      };
++
++      for (n = 0; n < 256; n += sizeof(dump)) {
++              for (n1 = 0; n1 < sizeof(dump); n1++)
++                      if (n == address_no_read[idx]) {
++                              idx++;
++                              dump[n1] = 0x00;
++                      } else
++                              dump[n1] = pcf50606_reg_read(pcf, n + n1);
++
++              hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0);
++              buf1 += strlen(buf1);
++              *buf1++ = '\n';
++              *buf1 = '\0';
++      }
++
++      return buf1 - buf;
++}
++static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL);
++
++static ssize_t show_resume_reason(struct device *dev,
++                              struct device_attribute *attr, char *buf)
++{
++      struct pcf50606 *pcf = dev_get_drvdata(dev);
++      int n;
++
++      n = sprintf(buf, "%02x%02x%02x\n",
++                              pcf->resume_reason[0],
++                              pcf->resume_reason[1],
++                              pcf->resume_reason[2]);
++
++      return n;
++}
++static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL);
++
++static struct attribute *pcf_sysfs_entries[] = {
++      &dev_attr_dump_regs.attr,
++      &dev_attr_resume_reason.attr,
++      NULL,
++};
++
++static struct attribute_group pcf_attr_group = {
++      .name   = NULL,                 /* put in device directory */
++      .attrs  = pcf_sysfs_entries,
++};
++
++int pcf50606_register_irq(struct pcf50606 *pcf, int irq,
++                      void (*handler) (int, void *), void *data)
++{
++      if (irq < 0 || irq > PCF50606_NUM_IRQ || !handler)
++              return -EINVAL;
++
++      if (WARN_ON(pcf->irq_handler[irq].handler))
++              return -EBUSY;
++
++      mutex_lock(&pcf->lock);
++      pcf->irq_handler[irq].handler = handler;
++      pcf->irq_handler[irq].data = data;
++      mutex_unlock(&pcf->lock);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_register_irq);
++
++int pcf50606_free_irq(struct pcf50606 *pcf, int irq)
++{
++      if (irq < 0 || irq > PCF50606_NUM_IRQ)
++              return -EINVAL;
++
++      mutex_lock(&pcf->lock);
++      pcf->irq_handler[irq].handler = NULL;
++      mutex_unlock(&pcf->lock);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_free_irq);
++
++static int __pcf50606_irq_mask_set(struct pcf50606 *pcf, int irq, u8 mask)
++{
++      u8 reg, bits, tmp;
++      int ret = 0, idx;
++
++      idx = irq >> 3;
++      reg =  PCF50606_REG_INT1M + idx;
++      bits = 1 << (irq & 0x07);
++
++      mutex_lock(&pcf->lock);
++
++      if (mask) {
++              ret = __pcf50606_read(pcf, reg, 1, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              tmp |= bits;
++
++              ret = __pcf50606_write(pcf, reg, 1, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              pcf->mask_regs[idx] &= ~bits;
++              pcf->mask_regs[idx] |= bits;
++      } else {
++              ret = __pcf50606_read(pcf, reg, 1, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              tmp &= ~bits;
++
++              ret = __pcf50606_write(pcf, reg, 1, &tmp);
++              if (ret < 0)
++                      goto out;
++
++              pcf->mask_regs[idx] &= ~bits;
++      }
++out:
++      mutex_unlock(&pcf->lock);
++
++      return ret;
++}
++
++int pcf50606_irq_mask(struct pcf50606 *pcf, int irq)
++{
++      dev_info(pcf->dev, "Masking IRQ %d\n", irq);
++
++      return __pcf50606_irq_mask_set(pcf, irq, 1);
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_mask);
++
++int pcf50606_irq_unmask(struct pcf50606 *pcf, int irq)
++{
++      dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
++
++      return __pcf50606_irq_mask_set(pcf, irq, 0);
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_unmask);
++
++int pcf50606_irq_mask_get(struct pcf50606 *pcf, int irq)
++{
++      u8 reg, bits;
++
++      reg =  (irq / 8);
++      bits = (1 << (irq % 8));
++
++      return pcf->mask_regs[reg] & bits;
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_mask_get);
++
++static void pcf50606_irq_call_handler(struct pcf50606 *pcf,
++                                      int irq)
++{
++      if (pcf->irq_handler[irq].handler)
++              pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
++}
++
++#define PCF50606_ONKEY1S_TIMEOUT      8
++
++#define PCF50606_REG_MBCS1            0x2c
++
++static void pcf50606_irq_worker(struct work_struct *work)
++{
++      struct pcf50606 *pcf;
++      int ret, i, j;
++      u8 pcf_int[3], chgstat;
++
++      pcf = container_of(work, struct pcf50606, irq_work);
++
++      /* Read the 3 INT regs in one transaction */
++      ret = pcf50606_read_block(pcf, PCF50606_REG_INT1,
++                                              ARRAY_SIZE(pcf_int), pcf_int);
++      if (ret != ARRAY_SIZE(pcf_int)) {
++              dev_info(pcf->dev, "Error reading INT registers\n");
++              
++              /*
++               * If this doesn't ACK the interrupt to the chip, we'll be
++               * called once again as we're level triggered.
++               */
++              goto out;
++      }
++
++      /* We immediately read the charger status. We thus make sure
++       * only of CHGINS/CHGRM interrupt handlers are called */
++      if (pcf_int[1] & (PCF50606_INT2_CHGINS | PCF50606_INT2_CHGRM)) {
++              chgstat = pcf50606_reg_read(pcf, PCF50606_REG_MBCS1);
++              if (chgstat & (0x1 << 4))
++                      pcf_int[1] &= ~(1 << PCF50606_INT2_CHGRM);
++              else
++                      pcf_int[1] &= ~(1 << PCF50606_INT2_CHGINS);
++      }
++      
++      dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x\n",
++                              pcf_int[0], pcf_int[1], pcf_int[2]);
++
++      /* Some revisions of the chip don't have a 8s standby mode on
++       * ONKEY1S press. We try to manually do it in such cases. */
++      if (pcf_int[0] & PCF50606_INT1_SECOND && pcf->onkey1s_held) {
++              dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
++                                                      pcf->onkey1s_held);
++              if (pcf->onkey1s_held++ == PCF50606_ONKEY1S_TIMEOUT)
++                      if (pcf->pdata->force_shutdown)
++                              pcf->pdata->force_shutdown(pcf);
++      }
++
++      if (pcf_int[0] & PCF50606_INT1_ONKEY1S) {
++              dev_info(pcf->dev, "ONKEY1S held\n");
++              pcf->onkey1s_held = 1 ;
++
++              /* Unmask IRQ_SECOND */
++              pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
++                                              PCF50606_INT1_SECOND);
++
++              /* Unmask IRQ_ONKEYF */
++              pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
++                                              PCF50606_INT1_ONKEYF);
++      }
++
++      if ((pcf_int[0] & PCF50606_INT1_ONKEYR) && pcf->onkey1s_held) {
++              pcf->onkey1s_held = 0;
++
++              /* Mask SECOND and ONKEYF interrupts */
++              if (pcf->mask_regs[0] & PCF50606_INT1_SECOND)
++                      pcf50606_reg_set_bit_mask(pcf,
++                                      PCF50606_REG_INT1M,
++                                      PCF50606_INT1_SECOND,
++                                      PCF50606_INT1_SECOND);
++
++              if (pcf->mask_regs[0] & PCF50606_INT1_ONKEYF)
++                      pcf50606_reg_set_bit_mask(pcf,
++                                      PCF50606_REG_INT1M,
++                                      PCF50606_INT1_ONKEYF,
++                                      PCF50606_INT1_ONKEYF);
++      }
++
++      /* Have we just resumed ? */
++      if (pcf->is_suspended) {
++
++              pcf->is_suspended = 0;
++
++              /* Set the resume reason filtering out non resumers */
++              for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
++                      pcf->resume_reason[i] = pcf_int[i] &
++                                              pcf->pdata->resumers[i];
++
++              /* Make sure we don't pass on ONKEY events to
++               * userspace now */
++              pcf_int[1] &= ~(PCF50606_INT1_ONKEYR | PCF50606_INT1_ONKEYF);
++      }
++
++      for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
++              /* Unset masked interrupts */
++              pcf_int[i] &= ~pcf->mask_regs[i];
++
++              for (j = 0; j < 8 ; j++)
++                      if (pcf_int[i] & (1 << j))
++                              pcf50606_irq_call_handler(pcf, (i * 8) + j);
++      }
++
++out:
++      put_device(pcf->dev);
++      enable_irq(pcf->irq);
++}
++
++static irqreturn_t pcf50606_irq(int irq, void *data)
++{
++      struct pcf50606 *pcf = data;
++
++      get_device(pcf->dev);
++      disable_irq(pcf->irq);
++      schedule_work(&pcf->irq_work);
++
++      return IRQ_HANDLED;
++}
++
++static void
++pcf50606_client_dev_register(struct pcf50606 *pcf, const char *name,
++                                              struct platform_device **pdev)
++{
++      struct pcf50606_subdev_pdata subdev_pdata;
++      int ret;
++
++      *pdev = platform_device_alloc(name, -1);
++      if (!*pdev) {
++              dev_err(pcf->dev, "Falied to allocate %s\n", name);
++              return;
++      }
++
++      subdev_pdata.pcf = pcf;
++      platform_device_add_data(*pdev, &subdev_pdata, sizeof(subdev_pdata));
++
++      (*pdev)->dev.parent = pcf->dev;
++
++      ret = platform_device_add(*pdev);
++      if (ret) {
++              dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
++              platform_device_put(*pdev);
++              *pdev = NULL;
++      }
++}
++
++#ifdef CONFIG_PM
++static int pcf50606_suspend(struct device *dev, pm_message_t state)
++{
++      struct pcf50606 *pcf;
++      int ret, i;
++      u8 res[3];
++
++      pcf = dev_get_drvdata(dev);
++
++      /* Make sure our interrupt handlers are not called
++       * henceforth */
++      disable_irq(pcf->irq);
++
++      /* Make sure that any running IRQ worker has quit */
++      cancel_work_sync(&pcf->irq_work);
++
++      /* Save the masks */
++      ret = pcf50606_read_block(pcf, PCF50606_REG_INT1M,
++                              ARRAY_SIZE(pcf->suspend_irq_masks),
++                                              pcf->suspend_irq_masks);
++      if (ret < 0) {
++              dev_err(pcf->dev, "error saving irq masks\n");
++              goto out;
++      }
++      
++      /* Write wakeup irq masks */
++      for (i = 0; i < ARRAY_SIZE(res); i++)
++              res[i] = ~pcf->pdata->resumers[i];
++
++      ret = pcf50606_write_block(pcf, PCF50606_REG_INT1M,
++                                      ARRAY_SIZE(res), &res[0]);
++      if (ret < 0) {
++              dev_err(pcf->dev, "error writing wakeup irq masks\n");
++              goto out;
++      }
++
++      pcf->is_suspended = 1;
++
++out:
++      return ret;
++}
++
++static int pcf50606_resume(struct device *dev)
++{
++      struct pcf50606 *pcf;
++      int ret;
++
++      pcf = dev_get_drvdata(dev);
++
++      /* Write the saved mask registers */
++      ret = pcf50606_write_block(pcf, PCF50606_REG_INT1M,
++                              ARRAY_SIZE(pcf->suspend_irq_masks),
++                                      pcf->suspend_irq_masks);
++      if (ret < 0)
++              dev_err(pcf->dev, "Error restoring saved suspend masks\n");
++
++      get_device(pcf->dev);
++
++      /*
++       * Clear any pending interrupts and set resume reason if any.
++       * This will leave with enable_irq()
++       */
++      pcf50606_irq_worker(&pcf->irq_work);
++
++      return 0;
++}
++#else
++#define pcf50606_suspend NULL
++#define pcf50606_resume NULL
++#endif
++
++static int pcf50606_probe(struct i2c_client *client,
++                              const struct i2c_device_id *ids)
++{
++      struct pcf50606 *pcf;
++      struct pcf50606_platform_data *pdata = client->dev.platform_data;
++      int i, ret = 0;
++      int version, variant;
++
++      pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
++      if (!pcf)
++              return -ENOMEM;
++
++      pcf->pdata = pdata;
++
++      mutex_init(&pcf->lock);
++
++      i2c_set_clientdata(client, pcf);
++      pcf->dev = &client->dev;
++      pcf->i2c_client = client;
++      pcf->irq = client->irq;
++
++      INIT_WORK(&pcf->irq_work, pcf50606_irq_worker);
++
++      version = pcf50606_reg_read(pcf, 0);
++      variant = pcf50606_reg_read(pcf, 1);
++      if (version < 0 || variant < 0) {
++              dev_err(pcf->dev, "Unable to probe pcf50606\n");
++              ret = -ENODEV;
++              goto err;
++      }
++
++      dev_info(pcf->dev, "Probed device version %d variant %d\n",
++                                                      version, variant);
++      /* Enable all inteerupts except RTC SECOND */
++      pcf->mask_regs[0] = 0x40;
++      pcf50606_reg_write(pcf, PCF50606_REG_INT1M, pcf->mask_regs[0]);
++      pcf50606_reg_write(pcf, PCF50606_REG_INT2M, 0x00);
++      pcf50606_reg_write(pcf, PCF50606_REG_INT3M, 0x00);
++
++      pcf50606_client_dev_register(pcf, "pcf50606-input",
++                                              &pcf->input_pdev);
++      pcf50606_client_dev_register(pcf, "pcf50606-rtc",
++                                              &pcf->rtc_pdev);
++      pcf50606_client_dev_register(pcf, "pcf50606-mbc",
++                                              &pcf->mbc_pdev);
++      pcf50606_client_dev_register(pcf, "pcf50606-adc",
++                                              &pcf->adc_pdev);
++      pcf50606_client_dev_register(pcf, "pcf50606-wdt",
++                                              &pcf->wdt_pdev);
++      for (i = 0; i < PCF50606_NUM_REGULATORS; i++) {
++              struct platform_device *pdev;
++
++              pdev = platform_device_alloc("pcf50606-regltr", i);
++              if (!pdev) {
++                      dev_err(pcf->dev, "Cannot create regulator\n");
++                      continue;
++              }
++      
++              pdev->dev.parent = pcf->dev;
++              pdev->dev.platform_data = &pdata->reg_init_data[i];
++              pdev->dev.driver_data = pcf;
++              pcf->regulator_pdev[i] = pdev;
++
++              platform_device_add(pdev);
++      }
++
++      if (client->irq) {
++              set_irq_handler(client->irq, handle_level_irq);
++              ret = request_irq(client->irq, pcf50606_irq,
++                              IRQF_TRIGGER_LOW, "pcf50606", pcf);
++
++              if (ret) {
++                      dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
++                      goto err;
++              }
++      } else {
++              dev_err(pcf->dev, "No IRQ configured\n");
++              goto err;
++      }
++
++      if (enable_irq_wake(client->irq) < 0)
++              dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
++                      "in this hardware revision", client->irq);
++
++      ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
++      if (ret)
++              dev_err(pcf->dev, "error creating sysfs entries\n");
++
++      if (pdata->probe_done)
++              pdata->probe_done(pcf);
++
++      return 0;
++
++err:
++      kfree(pcf);
++      return ret;
++}
++
++static int pcf50606_remove(struct i2c_client *client)
++{
++      struct pcf50606 *pcf = i2c_get_clientdata(client);
++      int i;
++
++      free_irq(pcf->irq, pcf);
++
++      platform_device_unregister(pcf->input_pdev);
++      platform_device_unregister(pcf->rtc_pdev);
++      platform_device_unregister(pcf->mbc_pdev);
++      platform_device_unregister(pcf->adc_pdev);
++
++      for (i = 0; i < PCF50606_NUM_REGULATORS; i++)
++              platform_device_unregister(pcf->regulator_pdev[i]);
++
++      kfree(pcf);
++
++      return 0;
++}
++
++static struct i2c_device_id pcf50606_id_table[] = {
++      {"pcf50606", 0x08},
++};
++
++static struct i2c_driver pcf50606_driver = {
++      .driver = {
++              .name   = "pcf50606",
++              .suspend = pcf50606_suspend,
++              .resume = pcf50606_resume,
++      },
++      .id_table = pcf50606_id_table,
++      .probe = pcf50606_probe,
++      .remove = pcf50606_remove,
++};
++
++static int __init pcf50606_init(void)
++{
++      return i2c_add_driver(&pcf50606_driver);
++}
++
++static void pcf50606_exit(void)
++{
++      i2c_del_driver(&pcf50606_driver);
++}
++
++MODULE_DESCRIPTION("I2C chip driver for NXP PCF50606 PMU");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(pcf50606_init);
++module_exit(pcf50606_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-gpo.c linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-gpo.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/pcf50606-gpo.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50606-gpo.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,119 @@
++/* Philips PCF50606 GPO Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green Werner Almesberger and Matt Hsu
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/gpo.h>
++
++void pcf50606_gpo_set_active(struct pcf50606 *pcf, int gpo, int val)
++{
++      u8 reg, value, mask;
++
++      reg = gpo;
++      value = val;
++      mask = 0x07;
++
++      if (gpo == PCF50606_GPO2) {
++              value = val << 4;
++              mask = 0x07 << 4;
++      }
++      pcf50606_reg_set_bit_mask(pcf, reg, mask, value);
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_set_active);
++
++int pcf50606_gpo_get_active(struct pcf50606 *pcf, int gpo)
++{
++      u8 reg, value, shift = 0;
++
++      reg = gpo;
++      if (gpo == PCF50606_GPO2)
++              shift = 4;
++      
++      value = pcf50606_reg_read(pcf, reg);
++
++      return (value >> shift) & 0x07;
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_get_active);
++
++void pcf50606_gpo_set_standby(struct pcf50606 *pcf, int gpo, int val)
++{
++      u8 reg;
++
++      if (gpo == PCF50606_GPO1 || gpo == PCF50606_GPO2) {
++              dev_err(pcf->dev, "Can't set standby settings for GPO[12]n");
++              return;
++      }
++
++      reg = gpo;
++
++      pcf50606_reg_set_bit_mask(pcf, gpo, 0x07 << 3, val);
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_set_standby);
++
++int pcf50606_gpo_get_standby(struct pcf50606 *pcf, int gpo)
++{
++      u8 reg, value;
++
++      if (gpo == PCF50606_GPO1 || gpo == PCF50606_GPO2) {
++              dev_err(pcf->dev, "Can't get standby settings for GPO[12]n");
++              return -EINVAL;
++      }
++
++      reg = gpo;
++      value = pcf50606_reg_read(pcf, reg);
++
++      return (value >> 3) & 0x07;
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_get_standby);
++
++void pcf50606_gpo_invert_set(struct pcf50606 *pcf, int gpo, int invert)
++{
++      u8 reg, value, mask;
++
++      reg = gpo;
++      value = !!invert << 6;
++      mask = 0x01 << 6;
++
++      if (gpo == PCF50606_GPO1) {
++              mask = 0x01 << 4;
++              value = !!invert << 4;
++      }
++      else if (gpo == PCF50606_GPO2) {
++              mask = 0x01 << 7;
++              value = !!invert << 7;
++      }
++
++      pcf50606_reg_set_bit_mask(pcf, reg, mask, value);
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_invert_set);
++
++int pcf50606_gpo_invert_get(struct pcf50606 *pcf, int gpo)
++{
++      u8 reg, value, shift;
++
++      reg = gpo;
++      shift = 6;
++
++      if (gpo == PCF50606_GPO1)
++              shift = 4;
++      else if (gpo == PCF50606_GPO2)
++              shift = 7;
++
++      value =  pcf50606_reg_read(pcf, reg);
++
++      return (value >> shift) & 0x01;
++}
++EXPORT_SYMBOL_GPL(pcf50606_gpo_invert_get);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mfd/pcf50633-core.c linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50633-core.c
+--- linux-2.6.29-rc3.owrt/drivers/mfd/pcf50633-core.c  2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mfd/pcf50633-core.c       2009-05-10 22:28:00.000000000 +0200
+@@ -346,6 +346,8 @@
+               goto out;
+       }
++      pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,  0x04 );  /* defeat 8s death from lowsys on A5 */
++
+       /* We immediately read the usb and adapter status. We thus make sure
+        * only of USBINS/USBREM IRQ handlers are called */
+       if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+@@ -445,6 +447,7 @@
+       get_device(pcf->dev);
+       disable_irq(pcf->irq);
++
+       schedule_work(&pcf->irq_work);
+       return IRQ_HANDLED;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/Kconfig linux-2.6.29-rc3.owrt.om/drivers/misc/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/misc/Kconfig 2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/Kconfig      2009-05-10 22:28:00.000000000 +0200
+@@ -225,4 +225,10 @@
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
++config MACH_NEO1973
++      bool
++      help
++        Common machine code for Openmoko GTAxx hardware
++
+ endif # MISC_DEVICES
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/Makefile linux-2.6.29-rc3.owrt.om/drivers/misc/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/misc/Makefile        2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/Makefile     2009-05-10 22:28:00.000000000 +0200
+@@ -20,3 +20,8 @@
+ obj-$(CONFIG_HP_ILO)          += hpilo.o
+ obj-$(CONFIG_C2PORT)          += c2port/
+ obj-y                         += eeprom/
++obj-$(CONFIG_MACH_SMDK6410)   += smdk6410-sleeptest.o
++obj-$(CONFIG_MACH_NEO1973)      += neo1973_version.o \
++                                   neo1973_pm_host.o \
++                                   neo1973_pm_resume_reason.o
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_charging_led.c linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_charging_led.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_charging_led.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_charging_led.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,106 @@
++/*
++ * Charging LED sysfs for the FIC Neo1973 GSM Phone
++ * (currently only implemented in GTA02 but ready for GTA01 implementation)
++ *
++ * (C) 2008 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License charging_led 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <asm/arch/gta02.h>
++
++static enum neo1973_charging_led_modes charging_mode;
++
++static char *charging_led_mode_names[] = {
++      "Disabled",
++      "Aux LED",
++      "Power LED"
++};
++
++static ssize_t charging_led_read(struct device *dev,
++                               struct device_attribute *attr, char *buf)
++{
++      return sprintf(buf, "0x%03X\n", gta02_get_pcb_revision());
++}
++
++static ssize_t charging_led_read(struct device *dev,
++                               struct device_attribute *attr, char *buf)
++{
++      return sprintf(buf, "0x%03X\n", gta02_get_pcb_revision());
++}
++
++
++static DEVICE_ATTR(pcb, 0644, charging_led_read, charging_led_write);
++
++static struct attribute *neo1973_charging_led_sysfs_entries[] = {
++      &dev_attr_pcb.attr,
++      NULL
++};
++
++static struct attribute_group neo1973_charging_led_attr_group = {
++      .name   = NULL,
++      .attrs  = neo1973_charging_led_sysfs_entries,
++};
++
++static int __init neo1973_charging_led_probe(struct platform_device *pdev)
++{
++      dev_info(&pdev->dev, "starting\n");
++
++      switch (machine_arch_type) {
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      case MACH_TYPE_NEO1973_GTA01:
++              return -EINVAL;
++#endif /* CONFIG_MACH_NEO1973_GTA01 */
++      default:
++              break;
++      }
++
++      return sysfs_create_group(&pdev->dev.kobj,
++                                           &neo1973_charging_led_attr_group);
++}
++
++static int neo1973_charging_led_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &neo1973_charging_led_attr_group);
++      return 0;
++}
++
++static struct platform_driver neo1973_charging_led_driver = {
++      .probe          = neo1973_charging_led_probe,
++      .remove         = neo1973_charging_led_remove,
++      .driver         = {
++              .name           = "neo1973-charging-led",
++      },
++};
++
++static int __devinit neo1973_charging_led_init(void)
++{
++      return platform_driver_register(&neo1973_charging_led_driver);
++}
++
++static void neo1973_charging_led_exit(void)
++{
++      platform_driver_unregister(&neo1973_charging_led_driver);
++}
++
++module_init(neo1973_charging_led_init);
++module_exit(neo1973_charging_led_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 PCB charging_led");
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_host.c linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_host.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_host.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_host.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,109 @@
++/*
++ * Bluetooth PM code for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/gpio.h>
++
++static ssize_t pm_host_read(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      return sprintf(buf, "%d\n",
++                     pcf50633_gpio_get(gta02_pcf, PCF50633_GPO)
++                                              == PCF50633_GPOCFG_GPOSEL_1);
++}
++
++static ssize_t pm_host_write(struct device *dev, struct device_attribute *attr,
++                           const char *buf, size_t count)
++{
++      unsigned long on = simple_strtoul(buf, NULL, 10);
++      u8 val;
++
++      if (on)
++              val = PCF50633_GPOCFG_GPOSEL_1;
++      else
++              val = PCF50633_GPOCFG_GPOSEL_0;
++
++
++      pcf50633_gpio_set(gta02_pcf, PCF50633_GPO, val);
++
++      return count;
++}
++
++static DEVICE_ATTR(hostmode, 0644, pm_host_read, pm_host_write);
++
++static struct attribute *neo1973_pm_host_sysfs_entries[] = {
++      &dev_attr_hostmode.attr,
++      NULL
++};
++
++static struct attribute_group neo1973_pm_host_attr_group = {
++      .name   = NULL,
++      .attrs  = neo1973_pm_host_sysfs_entries,
++};
++
++static int __init neo1973_pm_host_probe(struct platform_device *pdev)
++{
++      dev_info(&pdev->dev, "starting\n");
++
++      switch (machine_arch_type) {
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      case MACH_TYPE_NEO1973_GTA01:
++              return -EINVAL;
++#endif /* CONFIG_MACH_NEO1973_GTA01 */
++      default:
++              break;
++      }
++
++      return sysfs_create_group(&pdev->dev.kobj, &neo1973_pm_host_attr_group);
++}
++
++static int neo1973_pm_host_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &neo1973_pm_host_attr_group);
++      return 0;
++}
++
++static struct platform_driver neo1973_pm_host_driver = {
++      .probe          = neo1973_pm_host_probe,
++      .remove         = neo1973_pm_host_remove,
++      .driver         = {
++              .name           = "neo1973-pm-host",
++      },
++};
++
++static int __devinit neo1973_pm_host_init(void)
++{
++      return platform_driver_register(&neo1973_pm_host_driver);
++}
++
++static void neo1973_pm_host_exit(void)
++{
++      platform_driver_unregister(&neo1973_pm_host_driver);
++}
++
++module_init(neo1973_pm_host_init);
++module_exit(neo1973_pm_host_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 USB Host Power Management");
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_resume_reason.c linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_resume_reason.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_resume_reason.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_resume_reason.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,147 @@
++/*
++ * Resume reason sysfs for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2008 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License resume_reason 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <mach/gta02.h>
++#include <linux/mfd/pcf50633/core.h>
++#endif
++
++static unsigned int *gstatus4_mapped;
++static char *resume_reasons[][17] = { { /* GTA01 */
++      "EINT00_NULL",
++      "EINT01_GSM",
++      "EINT02_NULL",
++      "EINT03_NULL",
++      "EINT04_JACK",
++      "EINT05_SDCARD",
++      "EINT06_AUXKEY",
++      "EINT07_HOLDKEY",
++      "EINT08_NULL",
++      "EINT09_NULL",
++      "EINT10_NULL",
++      "EINT11_NULL",
++      "EINT12_NULL",
++      "EINT13_NULL",
++      "EINT14_NULL",
++      "EINT15_NULL",
++      NULL
++}, { /* GTA02 */
++      "EINT00_ACCEL1",
++      "EINT01_GSM",
++      "EINT02_BLUETOOTH",
++      "EINT03_DEBUGBRD",
++      "EINT04_JACK",
++      "EINT05_WLAN",
++      "EINT06_AUXKEY",
++      "EINT07_HOLDKEY",
++      "EINT08_ACCEL2",
++      "EINT09_PMU",
++      "EINT10_NULL",
++      "EINT11_NULL",
++      "EINT12_GLAMO",
++      "EINT13_NULL",
++      "EINT14_NULL",
++      "EINT15_NULL",
++      NULL
++} };
++
++static ssize_t resume_reason_read(struct device *dev,
++                                struct device_attribute *attr,
++                                char *buf)
++{
++      int bit = 0;
++      char *end = buf;
++      int gta = !!machine_is_neo1973_gta02();
++
++      for (bit = 0; resume_reasons[gta][bit]; bit++) {
++              if ((*gstatus4_mapped) & (1 << bit))
++                      end += sprintf(end, "* %s\n", resume_reasons[gta][bit]);
++              else
++                      end += sprintf(end, "  %s\n", resume_reasons[gta][bit]);
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++              if ((gta) && (bit == 9)); /* PMU */
++//                    end += pcf50633_report_resumers(gta02_pcf_pdata.pcf, end);
++#endif
++      }
++
++      return end - buf;
++}
++
++
++static DEVICE_ATTR(resume_reason, 0644, resume_reason_read, NULL);
++
++static struct attribute *neo1973_resume_reason_sysfs_entries[] = {
++      &dev_attr_resume_reason.attr,
++      NULL
++};
++
++static struct attribute_group neo1973_resume_reason_attr_group = {
++      .name   = NULL,
++      .attrs  = neo1973_resume_reason_sysfs_entries,
++};
++
++static int __init neo1973_resume_reason_probe(struct platform_device *pdev)
++{
++      dev_info(&pdev->dev, "starting\n");
++
++      gstatus4_mapped = ioremap(0x560000BC /* GSTATUS4 */, 0x4);
++      if (!gstatus4_mapped) {
++              dev_err(&pdev->dev, "failed to ioremap() memory region\n");
++              return -EINVAL;
++      }
++
++      return sysfs_create_group(&pdev->dev.kobj,
++                                          &neo1973_resume_reason_attr_group);
++}
++
++static int neo1973_resume_reason_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &neo1973_resume_reason_attr_group);
++      iounmap(gstatus4_mapped);
++      return 0;
++}
++
++static struct platform_driver neo1973_resume_reason_driver = {
++      .probe          = neo1973_resume_reason_probe,
++      .remove         = neo1973_resume_reason_remove,
++      .driver         = {
++              .name           = "neo1973-resume",
++      },
++};
++
++static int __devinit neo1973_resume_reason_init(void)
++{
++      return platform_driver_register(&neo1973_resume_reason_driver);
++}
++
++static void neo1973_resume_reason_exit(void)
++{
++      platform_driver_unregister(&neo1973_resume_reason_driver);
++}
++
++module_init(neo1973_resume_reason_init);
++module_exit(neo1973_resume_reason_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 resume_reason");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_usbhost.c linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_usbhost.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/neo1973_pm_usbhost.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_pm_usbhost.c 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,132 @@
++/*
++ * Bluetooth PM code for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007 by OpenMoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <asm/arch/gta02.h>
++#include <linux/pcf50633.h>
++#endif
++
++static ssize_t pm_usbhost_read(struct device *dev, struct device_attribute *attr,
++                     char *buf)
++{
++      return sprintf(buf, "%d\n",
++                     pcf50633_gpio_get(pcf50633_global, PCF50633_GPO));
++}
++
++static ssize_t pm_usbhost_write(struct device *dev, struct device_attribute *attr,
++                      const char *buf, size_t count)
++{
++      unsigned long on = simple_strtoul(buf, NULL, 10);
++
++      pcf50633_gpio_set(pcf50633_global, PCF50633_GPO, on);
++
++      return count;
++}
++
++static DEVICE_ATTR(hostmode, 0644, pm_usbhost_read, pm_usbhost_write);
++
++#ifdef CONFIG_PM
++static int neo1973_usbhost_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      dev_dbg(&pdev->dev, "suspending\n");
++      /* FIXME: The PMU should save the PMU status, and the GPIO code should
++       * preserve the GPIO level, so there shouldn't be anything left to do
++       * for us, should there? */
++
++      return 0;
++}
++
++static int neo1973_usbhost_resume(struct platform_device *pdev)
++{
++      dev_dbg(&pdev->dev, "resuming\n");
++
++      return 0;
++}
++#else
++#define neo1973_usbhost_suspend       NULL
++#define neo1973_usbhost_resume        NULL
++#endif
++
++static struct attribute *neo1973_usbhost_sysfs_entries[] = {
++      &dev_attr_hostmode.attr,
++      NULL
++};
++
++static struct attribute_group neo1973_usbhost_attr_group = {
++      .name   = NULL,
++      .attrs  = neo1973_usbhost_sysfs_entries,
++};
++
++static int __init neo1973_usbhost_probe(struct platform_device *pdev)
++{
++      dev_info(&pdev->dev, "starting\n");
++
++      switch (machine_arch_type) {
++
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      case MACH_TYPE_NEO1973_GTA01:
++              return -EINVAL;
++#endif /* CONFIG_MACH_NEO1973_GTA01 */
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++      case MACH_TYPE_NEO1973_GTA02:
++/* race */
++/*            pcf50633_gpio_set(pcf50633_global, PCF50633_GPO, 0); */
++              break;
++#endif /* CONFIG_MACH_NEO1973_GTA02 */
++      }
++
++      return sysfs_create_group(&pdev->dev.kobj, &neo1973_usbhost_attr_group);
++}
++
++static int neo1973_usbhost_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &neo1973_usbhost_attr_group);
++
++      return 0;
++}
++
++static struct platform_driver neo1973_usbhost_driver = {
++      .probe          = neo1973_usbhost_probe,
++      .remove         = neo1973_usbhost_remove,
++      .suspend        = neo1973_usbhost_suspend,
++      .resume         = neo1973_usbhost_resume,
++      .driver         = {
++              .name           = "neo1973-pm-host",
++      },
++};
++
++static int __devinit neo1973_usbhost_init(void)
++{
++      return platform_driver_register(&neo1973_usbhost_driver);
++}
++
++static void neo1973_usbhost_exit(void)
++{
++      platform_driver_unregister(&neo1973_usbhost_driver);
++}
++
++module_init(neo1973_usbhost_init);
++module_exit(neo1973_usbhost_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 USB Host Power Management");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/neo1973_version.c linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_version.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/neo1973_version.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/neo1973_version.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,90 @@
++/*
++ * PCB version sysfs for the FIC Neo1973 GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#ifdef CONFIG_MACH_NEO1973_GTA02
++#include <mach/gta02.h>
++
++static ssize_t version_read(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      return sprintf(buf, "0x%03X\n", gta02_get_pcb_revision());
++}
++
++
++static DEVICE_ATTR(pcb, 0644, version_read, NULL);
++
++static struct attribute *neo1973_version_sysfs_entries[] = {
++      &dev_attr_pcb.attr,
++      NULL
++};
++
++static struct attribute_group neo1973_version_attr_group = {
++      .name   = NULL,
++      .attrs  = neo1973_version_sysfs_entries,
++};
++
++static int __init neo1973_version_probe(struct platform_device *pdev)
++{
++      dev_info(&pdev->dev, "starting\n");
++
++      switch (machine_arch_type) {
++#ifdef CONFIG_MACH_NEO1973_GTA01
++      case MACH_TYPE_NEO1973_GTA01:
++              return -EINVAL;
++#endif /* CONFIG_MACH_NEO1973_GTA01 */
++      default:
++              break;
++      }
++
++      return sysfs_create_group(&pdev->dev.kobj, &neo1973_version_attr_group);
++}
++
++static int neo1973_version_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &neo1973_version_attr_group);
++      return 0;
++}
++
++static struct platform_driver neo1973_version_driver = {
++      .probe          = neo1973_version_probe,
++      .remove         = neo1973_version_remove,
++      .driver         = {
++              .name           = "neo1973-version",
++      },
++};
++
++static int __devinit neo1973_version_init(void)
++{
++      return platform_driver_register(&neo1973_version_driver);
++}
++
++static void neo1973_version_exit(void)
++{
++      platform_driver_unregister(&neo1973_version_driver);
++}
++
++module_init(neo1973_version_init);
++module_exit(neo1973_version_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("Neo1973 PCB version");
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/misc/smdk6410-sleeptest.c linux-2.6.29-rc3.owrt.om/drivers/misc/smdk6410-sleeptest.c
+--- linux-2.6.29-rc3.owrt/drivers/misc/smdk6410-sleeptest.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/misc/smdk6410-sleeptest.c 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,65 @@
++/* linux/drivers/misc/smdk6410-sleeptest.c
++ *
++ * Copyright 2008 Simtec Electronics
++ *    Ben Dooks <ben@simtec.co.uk>
++ *    http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/gpio.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++
++#include <plat/gpio-cfg.h>
++
++static irqreturn_t sleep_action(int irq, void *pw)
++{
++      printk(KERN_INFO "%s: irq %d\n", __func__, irq);
++      return IRQ_HANDLED;
++}
++
++static void sleep_setup(unsigned int irq, unsigned int gpio)
++{
++      int ret;
++
++      WARN_ON(s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)) < 0);
++      WARN_ON(s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP) < 0);
++
++      ret = request_irq(irq, sleep_action, IRQF_TRIGGER_FALLING,
++                        "sleep", NULL);
++      if (ret < 0)
++              printk(KERN_ERR "%s: request_irq() failed\n", __func__);
++
++      ret = set_irq_wake(irq, 1);
++      if (ret < 0)
++              printk(KERN_ERR "%s: set_irq_wake() failed\n", __func__);
++}
++
++static void sleep_led(unsigned int gpio)
++{
++//    gpio_request(gpio, "sleep led");
++//    gpio_direction_output(gpio, 0);
++}
++
++static __init int smdk6410_sleeptest_init(void)
++{
++      sleep_setup(IRQ_EINT(10), S3C64XX_GPN(10));
++//    sleep_led(S3C64XX_GPN(15));
++//    sleep_led(S3C64XX_GPN(14));
++//    sleep_led(S3C64XX_GPN(13));
++//    sleep_led(S3C64XX_GPN(12));
++
++      return 0;
++}
++
++module_init(smdk6410_sleeptest_init);
++
++MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/core/core.c linux-2.6.29-rc3.owrt.om/drivers/mmc/core/core.c
+--- linux-2.6.29-rc3.owrt/drivers/mmc/core/core.c      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/core/core.c   2009-05-10 22:28:00.000000000 +0200
+@@ -58,10 +58,11 @@
+ /*
+  * Internal function. Flush all scheduled work from the MMC work queue.
+  */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+       flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL_GPL(mmc_flush_scheduled_work);
+ /**
+  *    mmc_request_done - finish processing an MMC request
+@@ -572,7 +573,13 @@
+  */
+ static void mmc_power_up(struct mmc_host *host)
+ {
+-      int bit = fls(host->ocr_avail) - 1;
++      int bit;
++
++      /* If ocr is set, we use it */
++      if (host->ocr)
++              bit = ffs(host->ocr) - 1;
++      else
++              bit = fls(host->ocr_avail) - 1;
+       host->ios.vdd = bit;
+       if (mmc_host_is_spi(host)) {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/Kconfig linux-2.6.29-rc3.owrt.om/drivers/mmc/host/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/Kconfig     2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/Kconfig  2009-05-10 22:28:00.000000000 +0200
+@@ -48,6 +48,18 @@
+         If unsure, say N.
++config MMC_SDHCI_S3C
++      tristate "SDHCI support on Samsung S3C SoC"
++      depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
++      help
++        This selects the Secure Digital Host Controller Interface (SDHCI)
++        often referrered to as the HSMMC block in some of the Samsung S3C
++        range of SoC.
++
++        If you have a controller with this interface, say Y or M here.
++
++        If unsure, say N.
++
+ config MMC_RICOH_MMC
+       tristate "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
+       depends on MMC_SDHCI_PCI
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/Makefile linux-2.6.29-rc3.owrt.om/drivers/mmc/host/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/Makefile    2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/Makefile 2009-05-10 22:28:00.000000000 +0200
+@@ -11,6 +11,7 @@
+ obj-$(CONFIG_MMC_IMX)         += imxmmc.o
+ obj-$(CONFIG_MMC_SDHCI)               += sdhci.o
+ obj-$(CONFIG_MMC_SDHCI_PCI)   += sdhci-pci.o
++obj-$(CONFIG_MMC_SDHCI_S3C)   += sdhci-s3c.o
+ obj-$(CONFIG_MMC_RICOH_MMC)   += ricoh_mmc.o
+ obj-$(CONFIG_MMC_WBSD)                += wbsd.o
+ obj-$(CONFIG_MMC_AU1X)                += au1xmmc.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.c linux-2.6.29-rc3.owrt.om/drivers/mmc/host/s3cmci.c
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.c    2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/s3cmci.c 2009-05-10 22:28:00.000000000 +0200
+@@ -2,6 +2,7 @@
+  *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+  *
+  *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ *  Copyright (C) 2007 Harald Welte <laforge@gnumonks.org>
+  *
+  * Current driver maintained by Ben Dooks and Simtec Electronics
+  *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
+@@ -24,9 +25,18 @@
+ #include <mach/regs-sdi.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+ #include <plat/mci.h>
++#include <asm/dma.h>
++#include <asm/dma-mapping.h>
++
++#include <asm/io.h>
++#include <mach/regs-gpio.h>
++#include <mach/mci.h>
++#include <mach/dma.h>
++
+ #include "s3cmci.h"
+ #define DRIVER_NAME "s3c-mci"
+@@ -47,6 +57,9 @@
+ static const int dbgmap_info  = dbg_info | dbg_conf;
+ static const int dbgmap_debug = dbg_err | dbg_debug;
++static int f_max = -1; /* override maximum frequency limit */
++static int persist; /* keep interface alive across suspend/resume */
++
+ #define dbg(host, channels, args...)            \
+       do {                                      \
+       if (dbgmap_err & channels)                \
+@@ -280,8 +293,11 @@
+                * an even multiple of 4. */
+               if (fifo >= host->pio_bytes)
+                       fifo = host->pio_bytes;
+-              else
++              else {
+                       fifo -= fifo & 3;
++                      if (!fifo)
++                              break;
++              }
+               host->pio_bytes -= fifo;
+               host->pio_count += fifo;
+@@ -353,8 +369,11 @@
+                * words, so round down to an even multiple of 4. */
+               if (fifo >= host->pio_bytes)
+                       fifo = host->pio_bytes;
+-              else
++              else {
+                       fifo -= fifo & 3;
++                      if (!fifo)
++                              break;
++              }
+               host->pio_bytes -= fifo;
+               host->pio_count += fifo;
+@@ -373,7 +392,6 @@
+ {
+       struct s3cmci_host *host = (struct s3cmci_host *) data;
+-
+       disable_irq(host->irq);
+       if (host->pio_active == XFER_WRITE)
+@@ -614,7 +632,6 @@
+       spin_unlock_irqrestore(&host->complete_lock, iflags);
+       return IRQ_HANDLED;
+-
+ }
+ /*
+@@ -789,12 +806,11 @@
+       last_source = source;
+-      s3c2410_dma_devconfig(host->dma, source, 3,
++      s3c2410_dma_devconfig(host->dma, source,
+                             host->mem->start + host->sdidata);
+       if (!setup_ok) {
+-              s3c2410_dma_config(host->dma, 4,
+-                      (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
++              s3c2410_dma_config(host->dma, 4);
+               s3c2410_dma_set_buffdone_fn(host->dma,
+                                           s3cmci_dma_done_callback);
+               s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+@@ -1027,6 +1043,7 @@
+                       dbg(host, dbg_err, "data prepare error %d\n", res);
+                       cmd->error = res;
+                       cmd->data->error = res;
++                      cmd->data->error = -EIO;
+                       mmc_request_done(mmc, mrq);
+                       return;
+@@ -1264,10 +1281,8 @@
+       host->is2440    = is2440;
+       host->pdata = pdev->dev.platform_data;
+-      if (!host->pdata) {
+-              pdev->dev.platform_data = &s3cmci_def_pdata;
++      if (!host->pdata)
+               host->pdata = &s3cmci_def_pdata;
+-      }
+       spin_lock_init(&host->complete_lock);
+       tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+@@ -1380,6 +1395,18 @@
+       mmc->f_min      = host->clk_rate / (host->clk_div * 256);
+       mmc->f_max      = host->clk_rate / host->clk_div;
++      if (f_max >= 0) {
++              unsigned f = f_max;
++
++              if (f < mmc->f_min)
++                      f = mmc->f_min;
++              if (mmc->f_max > f) {
++                      dev_info(&pdev->dev, "f_max lowered from %u to %u Hz\n",
++                          mmc->f_max, f);
++                      mmc->f_max = f;
++              }
++      }
++
+       if (host->pdata->ocr_avail)
+               mmc->ocr_avail = host->pdata->ocr_avail;
+@@ -1492,18 +1519,60 @@
+ #ifdef CONFIG_PM
++static int save_regs(struct mmc_host *mmc)
++{
++      struct s3cmci_host *host = mmc_priv(mmc);
++      unsigned long flags;
++      unsigned from;
++      u32 *to = host->saved;
++
++      mmc_flush_scheduled_work();
++
++      local_irq_save(flags);
++      for (from = S3C2410_SDICON; from != S3C2410_SDIIMSK+4; from += 4)
++              if (from != host->sdidata)
++                      *to++ = readl(host->base + from);
++      BUG_ON(to-host->saved != ARRAY_SIZE(host->saved));
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++static int restore_regs(struct mmc_host *mmc)
++{
++      struct s3cmci_host *host = mmc_priv(mmc);
++      unsigned long flags;
++      unsigned to;
++      u32 *from = host->saved;
++
++      /*
++       * Before we begin with the necromancy, make sure we don't
++       * inadvertently start something we'll regret microseconds later.
++       */
++      from[S3C2410_SDICMDCON - S3C2410_SDICON] = 0;
++
++      local_irq_save(flags);
++      for (to = S3C2410_SDICON; to != S3C2410_SDIIMSK+4; to += 4)
++              if (to != host->sdidata)
++                      writel(*from++, host->base + to);
++      BUG_ON(from-host->saved != ARRAY_SIZE(host->saved));
++      local_irq_restore(flags);
++
++      return 0;
++}
++
+ static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+ {
+       struct mmc_host *mmc = platform_get_drvdata(dev);
+-      return  mmc_suspend_host(mmc, state);
++      return persist ? save_regs(mmc) : mmc_suspend_host(mmc, state);
+ }
+ static int s3cmci_resume(struct platform_device *dev)
+ {
+       struct mmc_host *mmc = platform_get_drvdata(dev);
+-      return mmc_resume_host(mmc);
++      return persist ? restore_regs(mmc) : mmc_resume_host(mmc);
+ }
+ #else /* CONFIG_PM */
+@@ -1561,9 +1630,13 @@
+ module_init(s3cmci_init);
+ module_exit(s3cmci_exit);
++module_param(f_max, int, 0644);
++module_param(persist, int, 0644);
++
+ MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+ MODULE_LICENSE("GPL v2");
+ MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
+ MODULE_ALIAS("platform:s3c2410-sdi");
+ MODULE_ALIAS("platform:s3c2412-sdi");
+ MODULE_ALIAS("platform:s3c2440-sdi");
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.h linux-2.6.29-rc3.owrt.om/drivers/mmc/host/s3cmci.h
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/s3cmci.h    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/s3cmci.h 2009-05-10 22:28:00.000000000 +0200
+@@ -8,6 +8,10 @@
+  * published by the Free Software Foundation.
+  */
++
++#include <mach/regs-sdi.h>
++#include <linux/regulator/consumer.h>
++
+ /* FIXME: DMA Resource management ?! */
+ #define S3CMCI_DMA 0
+@@ -68,7 +72,16 @@
+       unsigned int            ccnt, dcnt;
+       struct tasklet_struct   pio_tasklet;
++      /*
++       * Here's where we save the registers during suspend. Note that we skip
++       * SDIDATA, which is at different positions on 2410 and 2440, so
++       * there's no "+1" in the array size.
++       */
++      u32                     saved[(S3C2410_SDIIMSK-S3C2410_SDICON)/4];
++
+ #ifdef CONFIG_CPU_FREQ
+       struct notifier_block   freq_transition;
+ #endif
++
++      struct regulator *regulator;
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.c linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci.c
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.c     2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci.c  2009-05-10 22:28:00.000000000 +0200
+@@ -78,6 +78,11 @@
+               readl(host->ioaddr + SDHCI_CAPABILITIES),
+               readl(host->ioaddr + SDHCI_MAX_CURRENT));
++      if (host->flags & SDHCI_USE_ADMA)
++              printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
++                     readl(host->ioaddr + SDHCI_ADMA_ERROR),
++                     readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
++
+       printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
+ }
+@@ -736,6 +741,23 @@
+       writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
+ }
++static void shdci_check_dma_overrun(struct sdhci_host *host, struct mmc_data *data)
++{
++      u32 dma_pos = readl(host->ioaddr + SDHCI_DMA_ADDRESS);
++      u32 dma_start = sg_dma_address(data->sg);
++      u32 dma_end = dma_start + data->sg->length;
++
++      /* Test whether we ended up moving more data than
++       * was originally requested. */
++
++      if (dma_pos <= dma_end)
++              return;
++
++      printk(KERN_ERR "%s: dma overrun, dma %08x, req %08x..%08x\n",
++             mmc_hostname(host->mmc), dma_pos,
++             dma_start, dma_end);
++}
++
+ static void sdhci_finish_data(struct sdhci_host *host)
+ {
+       struct mmc_data *data;
+@@ -749,6 +771,8 @@
+               if (host->flags & SDHCI_USE_ADMA)
+                       sdhci_adma_table_post(host, data);
+               else {
++                      shdci_check_dma_overrun(host, data);
++
+                       dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+                               data->sg_len, (data->flags & MMC_DATA_READ) ?
+                                       DMA_FROM_DEVICE : DMA_TO_DEVICE);
+@@ -888,13 +912,18 @@
+ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+ {
++      if (clock == host->clock)
++              return;
++
++      host->ops->change_clock(host, clock);
++}
++
++void sdhci_change_clock(struct sdhci_host *host, unsigned int clock)
++{
+       int div;
+       u16 clk;
+       unsigned long timeout;
+-      if (clock == host->clock)
+-              return;
+-
+       writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+       if (clock == 0)
+@@ -931,6 +960,8 @@
+       host->clock = clock;
+ }
++EXPORT_SYMBOL_GPL(sdhci_set_clock);
++
+ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+ {
+       u8 pwr;
+@@ -1004,12 +1035,13 @@
+ #endif
+       host->mrq = mrq;
+-
++/*
+       if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
+               || (host->flags & SDHCI_DEVICE_DEAD)) {
+               host->mrq->cmd->error = -ENOMEDIUM;
+               tasklet_schedule(&host->finish_tasklet);
+       } else
++*/
+               sdhci_send_command(host, mrq->cmd);
+       mmiowb();
+@@ -1038,6 +1070,9 @@
+               sdhci_init(host);
+       }
++      if (host->ops->set_ios)
++              host->ops->set_ios(host, ios);
++
+       sdhci_set_clock(host, ios->clock);
+       if (ios->power_mode == MMC_POWER_OFF)
+@@ -1141,7 +1176,7 @@
+       host = (struct sdhci_host*)param;
+       spin_lock_irqsave(&host->lock, flags);
+-
++/*
+       if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+               if (host->mrq) {
+                       printk(KERN_ERR "%s: Card removed during transfer!\n",
+@@ -1156,7 +1191,7 @@
+                       tasklet_schedule(&host->finish_tasklet);
+               }
+       }
+-
++*/
+       spin_unlock_irqrestore(&host->lock, flags);
+       mmc_detect_change(host->mmc, msecs_to_jiffies(200));
+@@ -1288,11 +1323,24 @@
+        *       controllers.
+        */
+       if (host->cmd->flags & MMC_RSP_BUSY) {
++              u32 present;
++
+               if (host->cmd->data)
+                       DBG("Cannot wait for busy signal when also "
+                               "doing a data transfer");
+-              else
++              else if (!(host->quirks & SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY))
+                       return;
++
++              /* The Samsung SDHCI does not seem to provide an INT_DATA_END
++               * when the system goes non-busy, so check the state of the
++               * transfer by reading SDHCI_PRESENT_STATE to see if the
++               * controller is ready
++               */
++
++              present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
++              DBG("busy? present %08x, intstat %08x\n", present, intmask);
++
++              /* fall through and take the SDHCI_INT_RESPONSE */
+       }
+       if (intmask & SDHCI_INT_RESPONSE)
+@@ -1609,17 +1657,23 @@
+               mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+       }
+-      host->max_clk =
+-              (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
++      if (host->ops->get_max_clock)
++              host->max_clk = host->ops->get_max_clock(host);
++      else {
++              host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
++              host->max_clk *= 1000000;
++      }
+       if (host->max_clk == 0) {
+               printk(KERN_ERR "%s: Hardware doesn't specify base clock "
+                       "frequency.\n", mmc_hostname(mmc));
+               return -ENODEV;
+       }
+-      host->max_clk *= 1000000;
+-      host->timeout_clk =
+-              (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
++      if (host->ops->get_timeout_clock)
++              host->timeout_clk = host->ops->get_timeout_clock(host);
++      else
++              host->timeout_clk =
++                      (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+       if (host->timeout_clk == 0) {
+               printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
+                       "frequency.\n", mmc_hostname(mmc));
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.h linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci.h
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci.h     2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci.h  2009-05-10 22:28:00.000000000 +0200
+@@ -57,6 +57,7 @@
+ #define  SDHCI_DATA_AVAILABLE 0x00000800
+ #define  SDHCI_CARD_PRESENT   0x00010000
+ #define  SDHCI_WRITE_PROTECT  0x00080000
++#define  SDHCI_DATA_BIT(x)    (1 << ((x) + 20))
+ #define SDHCI_HOST_CONTROL    0x28
+ #define  SDHCI_CTRL_LED               0x01
+@@ -210,6 +211,8 @@
+ #define SDHCI_QUIRK_BROKEN_SMALL_PIO                  (1<<13)
+ /* Controller supports high speed but doesn't have the caps bit set */
+ #define SDHCI_QUIRK_FORCE_HIGHSPEED                   (1<<14)
++/* Controller does not provide transfer-complete interrupt when not busy */
++#define SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY              (1<<15)
+       int                     irq;            /* Device IRQ */
+       void __iomem *          ioaddr;         /* Mapped address */
+@@ -267,6 +270,14 @@
+ struct sdhci_ops {
+       int             (*enable_dma)(struct sdhci_host *host);
++      unsigned int    (*get_max_clock)(struct sdhci_host *host);
++      unsigned int    (*get_timeout_clock)(struct sdhci_host *host);
++
++      void            (*change_clock)(struct sdhci_host *host,
++                                      unsigned int clock);
++
++      void            (*set_ios)(struct sdhci_host *host,
++                                 struct mmc_ios *ios);
+ };
+@@ -274,6 +285,8 @@
+       size_t priv_size);
+ extern void sdhci_free_host(struct sdhci_host *host);
++extern void sdhci_change_clock(struct sdhci_host *host, unsigned int clock);
++
+ static inline void *sdhci_priv(struct sdhci_host *host)
+ {
+       return (void *)host->private;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-pci.c linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci-pci.c
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-pci.c 2009-05-10 22:08:43.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci-pci.c      2009-05-10 22:28:00.000000000 +0200
+@@ -391,6 +391,7 @@
+ static struct sdhci_ops sdhci_pci_ops = {
+       .enable_dma     = sdhci_pci_enable_dma,
++      .change_clock   = sdhci_change_clock,
+ };
+ /*****************************************************************************\
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-s3c.c linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci-s3c.c
+--- linux-2.6.29-rc3.owrt/drivers/mmc/host/sdhci-s3c.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/mmc/host/sdhci-s3c.c      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,419 @@
++/* linux/drivers/mmc/host/sdhci-s3c.c
++ *
++ * Copyright 2008 Openmoko Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * SDHCI (HSMMC) support for Samsung SoC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++
++#include <linux/mmc/host.h>
++
++#include <plat/regs-sdhci.h>
++#include <plat/sdhci.h>
++
++#include "sdhci.h"
++
++#define MAX_BUS_CLK   (4)
++
++struct sdhci_s3c {
++      struct sdhci_host       *host;
++      struct platform_device  *pdev;
++      struct resource         *ioarea;
++      struct s3c_sdhci_platdata *pdata;
++      unsigned int            cur_clk;
++
++      struct clk              *clk_io;        /* clock for io bus */
++      struct clk              *clk_bus[MAX_BUS_CLK];
++};
++
++static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
++{
++      return sdhci_priv(host);
++}
++
++static u32 get_curclk(u32 ctrl2)
++{
++      ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++      ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++
++      return ctrl2;
++}
++
++static void sdhci_s3c_check_sclk(struct sdhci_host *host)
++{
++      struct sdhci_s3c *ourhost = to_s3c(host);
++      u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++
++      if (get_curclk(tmp) != ourhost->cur_clk) {
++              dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
++
++              tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++              tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++              writel(tmp, host->ioaddr + 0x80);
++      }
++}
++
++static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
++{
++      struct sdhci_s3c *ourhost = to_s3c(host);
++      struct clk *busclk;
++      unsigned int rate, max;
++      int clk;
++
++      /* note, a reset will reset the clock source */
++
++      sdhci_s3c_check_sclk(host);
++
++      for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
++              busclk = ourhost->clk_bus[clk];
++              if (!busclk)
++                      continue;
++
++              rate = clk_get_rate(busclk);
++              if (rate > max)
++                      max = rate;
++      }
++
++      return max;
++}
++
++static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
++{
++      return sdhci_s3c_get_max_clk(host) / 1000000;
++}
++
++static void sdhci_s3c_set_ios(struct sdhci_host *host,
++                            struct mmc_ios *ios)
++{
++      struct sdhci_s3c *ourhost = to_s3c(host);
++      struct s3c_sdhci_platdata *pdata = ourhost->pdata;
++      int width;
++
++      sdhci_s3c_check_sclk(host);
++
++      if (ios->power_mode != MMC_POWER_OFF) {
++              switch (ios->bus_width) {
++              case MMC_BUS_WIDTH_4:
++                      width = 4;
++                      break;
++              case MMC_BUS_WIDTH_1:
++                      width = 1;
++                      break;
++              default:
++                      BUG();
++              }
++
++              if (pdata->cfg_gpio)
++                      pdata->cfg_gpio(ourhost->pdev, width);
++      }
++
++      if (pdata->cfg_card)
++              pdata->cfg_card(ourhost->pdev, host->ioaddr,
++                              ios, host->mmc->card);
++}
++
++static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
++                                           unsigned int src,
++                                           unsigned int wanted)
++{
++      unsigned long rate;
++      struct clk *clksrc = ourhost->clk_bus[src];
++      int div;
++
++      if (!clksrc)
++              return UINT_MAX;
++
++      rate = clk_get_rate(clksrc);
++
++      for (div = 1; div < 256; div *= 2) {
++              if ((rate / div) <= wanted)
++                      break;
++      }
++
++      dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
++              src, rate, wanted, rate / div);
++
++      return (wanted - (rate / div));
++}
++
++static void sdhci_s3c_change_clock(struct sdhci_host *host, unsigned int clock)
++{
++      struct sdhci_s3c *ourhost = to_s3c(host);
++      unsigned int best = UINT_MAX;
++      unsigned int delta;
++      int best_src = 0;
++      int src;
++      u32 ctrl;
++
++      for (src = 0; src < MAX_BUS_CLK; src++) {
++              delta = sdhci_s3c_consider_clock(ourhost, src, clock);
++              if (delta < best) {
++                      best = delta;
++                      best_src = src;
++              }
++      }
++
++      dev_dbg(&ourhost->pdev->dev,
++              "selected source %d, clock %d, delta %d\n",
++               best_src, clock, best);
++
++      /* turn clock off to card before changing clock source */
++      writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
++
++      /* select the new clock source */
++
++      if (ourhost->cur_clk != best_src) {
++              struct clk *clk = ourhost->clk_bus[best_src];
++
++              ourhost->cur_clk = best_src;
++              host->max_clk = clk_get_rate(clk);
++              host->timeout_clk = host->max_clk / 1000000;
++
++              ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++              ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++              ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++              writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
++      }
++
++      sdhci_change_clock(host, clock);
++}
++
++static struct sdhci_ops sdhci_s3c_ops = {
++      .get_max_clock          = sdhci_s3c_get_max_clk,
++      .get_timeout_clock      = sdhci_s3c_get_timeout_clk,
++      .change_clock           = sdhci_s3c_change_clock,
++      .set_ios                = sdhci_s3c_set_ios,
++};
++
++/*
++ * call this when you need sd stack to recognize insertion or removal of card
++ * that can't be told by SDHCI regs
++ */
++
++void sdhci_s3c_force_presence_change(struct platform_device *pdev)
++{
++      struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++
++      dev_info(&pdev->dev, "sdhci_s3c_force_presence_change called\n");
++      mmc_detect_change(pdata->sdhci_host->mmc, msecs_to_jiffies(200));
++}
++EXPORT_SYMBOL_GPL(sdhci_s3c_force_presence_change);
++
++
++static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
++{
++      struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++      struct device *dev = &pdev->dev;
++      struct sdhci_host *host;
++      struct sdhci_s3c *sc;
++      struct resource *res;
++      int ret, irq, ptr, clks;
++
++      if (!pdata) {
++              dev_err(dev, "no device data specified\n");
++              return -ENOENT;
++      }
++
++      irq = platform_get_irq(pdev, 0);
++      if (irq < 0) {
++              dev_err(dev, "no irq specified\n");
++              return irq;
++      }
++
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!res) {
++              dev_err(dev, "no memory specified\n");
++              return -ENOENT;
++      }
++
++      host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
++      if (IS_ERR(host)) {
++              dev_err(dev, "sdhci_alloc_host() failed\n");
++              return PTR_ERR(host);
++      }
++
++      pdata->sdhci_host = host;
++
++      sc = sdhci_priv(host);
++
++      sc->host = host;
++      sc->pdev = pdev;
++      sc->pdata = pdata;
++
++      platform_set_drvdata(pdev, host);
++
++      sc->clk_io = clk_get(dev, "hsmmc");
++      if (IS_ERR(sc->clk_io)) {
++              dev_err(dev, "failed to get io clock\n");
++              ret = PTR_ERR(sc->clk_io);
++              goto err_io_clk;
++      }
++
++      /* enable the local io clock and keep it running for the moment. */
++      clk_enable(sc->clk_io);
++
++      for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++              struct clk *clk;
++              char *name = pdata->clocks[ptr];
++
++              if (name == NULL)
++                      continue;
++
++              clk = clk_get(dev, name);
++              if (IS_ERR(clk)) {
++                      dev_err(dev, "failed to get clock %s\n", name);
++                      continue;
++              }
++
++              clks++;
++              sc->clk_bus[ptr] = clk;
++              clk_enable(clk);
++
++              dev_info(dev, "clock source %d: %s (%ld Hz)\n",
++                       ptr, name, clk_get_rate(clk));
++      }
++
++      if (clks == 0) {
++              dev_err(dev, "failed to find any bus clocks\n");
++              ret = -ENOENT;
++              goto err_no_busclks;
++      }
++
++      sc->ioarea = request_mem_region(res->start, resource_size(res),
++                                      mmc_hostname(host->mmc));
++      if (!sc->ioarea) {
++              dev_err(dev, "failed to reserve register area\n");
++              ret = -ENXIO;
++              goto err_req_regs;
++      }
++
++      host->ioaddr = ioremap_nocache(res->start, resource_size(res));
++      if (!host->ioaddr) {
++              dev_err(dev, "failed to map registers\n");
++              ret = -ENXIO;
++              goto err_req_regs;
++      }
++
++      /* Ensure we have minimal gpio selected CMD/CLK/Detect */
++      if (pdata->cfg_gpio)
++              pdata->cfg_gpio(pdev, 0);
++
++      sdhci_s3c_check_sclk(host);
++
++      host->hw_name = "samsung-hsmmc";
++      host->ops = &sdhci_s3c_ops;
++      host->quirks = 0;
++      host->irq = irq;
++
++      /* Setup quirks for the controller */
++
++      /* Currently with ADMA enabled we are getting some length
++       * interrupts that are not being dealt with, do disable
++       * ADMA until this is sorted out. */
++      host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
++      host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
++
++      /* It seems we do not get an DATA transfer complete on non-busy
++       * transfers, not sure if this is a problem with this specific
++       * SDHCI block, or a missing configuration that needs to be set. */
++      host->quirks |= SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY;
++
++      host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
++                       SDHCI_QUIRK_32BIT_DMA_SIZE);
++
++      ret = sdhci_add_host(host);
++      if (ret) {
++              dev_err(dev, "sdhci_add_host() failed\n");
++              goto err_add_host;
++      }
++
++      return 0;
++
++ err_add_host:
++      release_resource(sc->ioarea);
++      kfree(sc->ioarea);
++
++ err_req_regs:
++      for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++              clk_disable(sc->clk_bus[ptr]);
++              clk_put(sc->clk_bus[ptr]);
++      }
++
++ err_no_busclks:
++      clk_disable(sc->clk_io);
++      clk_put(sc->clk_io);
++
++ err_io_clk:
++      sdhci_free_host(host);
++
++      return ret;
++}
++
++static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
++{
++      return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
++{
++      struct sdhci_host *host = platform_get_drvdata(dev);
++
++      sdhci_suspend_host(host, pm);
++      return 0;
++}
++
++static int sdhci_s3c_resume(struct platform_device *dev)
++{
++      struct sdhci_host *host = platform_get_drvdata(dev);
++
++      sdhci_resume_host(host);
++      return 0;
++}
++
++#else
++#define sdhci_s3c_suspend NULL
++#define sdhci_s3c_resume NULL
++#endif
++
++static struct platform_driver sdhci_s3c_driver = {
++      .probe          = sdhci_s3c_probe,
++      .remove         = __devexit_p(sdhci_s3c_remove),
++      .suspend        = sdhci_s3c_suspend,
++      .resume         = sdhci_s3c_resume,
++      .driver         = {
++              .owner  = THIS_MODULE,
++              .name   = "s3c-sdhci",
++      },
++};
++
++static int __init sdhci_s3c_init(void)
++{
++      return platform_driver_register(&sdhci_s3c_driver);
++}
++
++static void __exit sdhci_s3c_exit(void)
++{
++      platform_driver_unregister(&sdhci_s3c_driver);
++}
++
++module_init(sdhci_s3c_init);
++module_exit(sdhci_s3c_exit);
++
++MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
++MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:s3c-sdhci");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/mtd/nand/s3c2410.c linux-2.6.29-rc3.owrt.om/drivers/mtd/nand/s3c2410.c
+--- linux-2.6.29-rc3.owrt/drivers/mtd/nand/s3c2410.c   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/mtd/nand/s3c2410.c        2009-05-10 22:28:00.000000000 +0200
+@@ -231,8 +231,6 @@
+               BUG();
+       }
+-      dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+-
+       local_irq_save(flags);
+       cfg = readl(info->regs + S3C2410_NFCONF);
+@@ -240,6 +238,8 @@
+       cfg |= set;
+       writel(cfg, info->regs + S3C2410_NFCONF);
++      dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
++
+       local_irq_restore(flags);
+       return 0;
+@@ -438,7 +438,7 @@
+       if ((diff0 & ~(1<<fls(diff0))) == 0)
+               return 1;
+-      return -1;
++      return -EBADMSG;
+ }
+ /* ECC functions
+@@ -530,7 +530,12 @@
+ static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+       struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
++      u8 *ptr = buf + (len & ~3);
++      int i;
++
+       readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
++      for (i = 0; i != (len & 3); i++)
++              ptr[i] = readb(info->regs + S3C2440_NFDATA);
+ }
+ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+@@ -645,17 +650,31 @@
+ }
+ #ifdef CONFIG_MTD_PARTITIONS
++const char *part_probes[] = { "cmdlinepart", NULL };
+ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+                                     struct s3c2410_nand_mtd *mtd,
+                                     struct s3c2410_nand_set *set)
+ {
++      struct mtd_partition *part_info;
++      int nr_part = 0;
++
+       if (set == NULL)
+               return add_mtd_device(&mtd->mtd);
+-      if (set->nr_partitions > 0 && set->partitions != NULL) {
+-              return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
++      if (set->nr_partitions == 0) {
++              mtd->mtd.name = set->name;
++              nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
++                                              &part_info, 0);
++      } else {
++              if (set->nr_partitions > 0 && set->partitions != NULL) {
++                      nr_part = set->nr_partitions;
++                      part_info = set->partitions;
++              }
+       }
++      if (nr_part > 0 && part_info)
++              return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
++
+       return add_mtd_device(&mtd->mtd);
+ }
+ #else
+@@ -684,9 +703,13 @@
+       chip->select_chip  = s3c2410_nand_select_chip;
+       chip->chip_delay   = 50;
+       chip->priv         = nmtd;
+-      chip->options      = 0;
+       chip->controller   = &info->controller;
++      if (set->flags & S3C2410_NAND_BBT)
++              chip->options      = NAND_USE_FLASH_BBT;
++      else
++              chip->options      = 0;
++
+       switch (info->cpu_type) {
+       case TYPE_S3C2410:
+               chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+@@ -726,7 +749,7 @@
+       nmtd->mtd.owner    = THIS_MODULE;
+       nmtd->set          = set;
+-      if (hardware_ecc) {
++      if (!info->platform->software_ecc && hardware_ecc) {
+               chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+               chip->ecc.correct   = s3c2410_nand_correct_data;
+               chip->ecc.mode      = NAND_ECC_HW;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/net/ppp_deflate.c linux-2.6.29-rc3.owrt.om/drivers/net/ppp_deflate.c
+--- linux-2.6.29-rc3.owrt/drivers/net/ppp_deflate.c    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/net/ppp_deflate.c 2009-05-10 22:28:00.000000000 +0200
+@@ -306,7 +306,7 @@
+       if (state) {
+               zlib_inflateEnd(&state->strm);
+-              kfree(state->strm.workspace);
++              vfree(state->strm.workspace);
+               kfree(state);
+       }
+ }
+@@ -346,8 +346,7 @@
+       state->w_size         = w_size;
+       state->strm.next_out  = NULL;
+-      state->strm.workspace = kmalloc(zlib_inflate_workspacesize(),
+-                                      GFP_KERNEL|__GFP_REPEAT);
++      state->strm.workspace = vmalloc(zlib_inflate_workspacesize());
+       if (state->strm.workspace == NULL)
+               goto out_free;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/if_sdio.c linux-2.6.29-rc3.owrt.om/drivers/net/wireless/libertas/if_sdio.c
+--- linux-2.6.29-rc3.owrt/drivers/net/wireless/libertas/if_sdio.c      2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/net/wireless/libertas/if_sdio.c   2009-05-10 22:28:00.000000000 +0200
+@@ -49,6 +49,7 @@
+ static const struct sdio_device_id if_sdio_ids[] = {
+       { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
++      { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_88W8688) },
+       { /* end: all zeroes */                                         },
+ };
+@@ -73,7 +74,12 @@
+               .helper = "sd8686_helper.bin",
+               .firmware = "sd8686.bin",
+       },
+-};
++      {
++              /* 8688 */
++              .model = 0x10,
++              .helper = "sd8688_helper.bin",
++              .firmware = "sd8688.bin",
++      },};
+ struct if_sdio_packet {
+       struct if_sdio_packet   *next;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/pnp/Kconfig linux-2.6.29-rc3.owrt.om/drivers/pnp/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/pnp/Kconfig  2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/pnp/Kconfig       2009-05-10 22:28:00.000000000 +0200
+@@ -5,7 +5,7 @@
+ menuconfig PNP
+       bool "Plug and Play support"
+       depends on HAS_IOMEM
+-      depends on ISA || ACPI
++      depends on ISA || ACPI || SDIO
+       ---help---
+         Plug and Play (PnP) is a standard for peripherals which allows those
+         peripherals to be configured by software, e.g. assign IRQ's or other
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/pnp/resource.c linux-2.6.29-rc3.owrt.om/drivers/pnp/resource.c
+--- linux-2.6.29-rc3.owrt/drivers/pnp/resource.c       2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/pnp/resource.c    2009-05-10 22:28:00.000000000 +0200
+@@ -436,6 +436,7 @@
+               }
+       }
++#if 0
+       /* check if the resource is already in use, skip if the
+        * device is active because it itself may be in use */
+       if (!dev->active) {
+@@ -443,6 +444,7 @@
+                       return 0;
+               free_dma(*dma);
+       }
++#endif
+       /* check for conflicts with other pnp devices */
+       pnp_for_each_dev(tdev) {
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/bq27000_battery.c linux-2.6.29-rc3.owrt.om/drivers/power/bq27000_battery.c
+--- linux-2.6.29-rc3.owrt/drivers/power/bq27000_battery.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/power/bq27000_battery.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,474 @@
++/*
++ * Driver for batteries with bq27000 chips inside via HDQ
++ *
++ * Copyright 2008 Openmoko, Inc
++ * Andy Green <andy@openmoko.com>
++ *
++ * based on ds2760 driver, original copyright notice for that --->
++ *
++ * Copyright © 2007 Anton Vorontsov
++ *           2004-2007 Matt Reimer
++ *           2004 Szabolcs Gyurko
++ *
++ * Use consistent with the GNU GPL is permitted,
++ * provided that this copyright notice is
++ * preserved in its entirety in all copies and derived works.
++ *
++ * Author:  Anton Vorontsov <cbou@mail.ru>
++ *        February 2007
++ *
++ *        Matt Reimer <mreimer@vpop.net>
++ *        April 2004, 2005, 2007
++ *
++ *        Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
++ *        September 2004
++ */
++
++#include <linux/module.h>
++#include <linux/param.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++#include <linux/bq27000_battery.h>
++
++enum bq27000_regs {
++      /* RAM regs */
++              /* read-write after this */
++      BQ27000_CTRL = 0, /* Device Control Register */
++      BQ27000_MODE, /* Device Mode Register */
++      BQ27000_AR_L, /* At-Rate H L */
++      BQ27000_AR_H,
++              /* read-only after this */
++      BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
++      BQ27000_ARTTE_H,
++      BQ27000_TEMP_L, /* Reported Temperature H L */
++      BQ27000_TEMP_H,
++      BQ27000_VOLT_L, /* Reported Voltage H L */
++      BQ27000_VOLT_H,
++      BQ27000_FLAGS, /* Status Flags */
++      BQ27000_RSOC, /* Relative State of Charge */
++      BQ27000_NAC_L, /* Nominal Available Capacity H L */
++      BQ27000_NAC_H,
++      BQ27000_CACD_L, /* Discharge Compensated H L */
++      BQ27000_CACD_H,
++      BQ27000_CACT_L, /* Temperature Compensated H L */
++      BQ27000_CACT_H,
++      BQ27000_LMD_L, /* Last measured discharge H L */
++      BQ27000_LMD_H,
++      BQ27000_AI_L, /* Average Current H L */
++      BQ27000_AI_H,
++      BQ27000_TTE_L, /* Time to Empty H L */
++      BQ27000_TTE_H,
++      BQ27000_TTF_L, /* Time to Full H L */
++      BQ27000_TTF_H,
++      BQ27000_SI_L, /* Standby Current H L */
++      BQ27000_SI_H,
++      BQ27000_STTE_L, /* Standby Time To Empty H L */
++      BQ27000_STTE_H,
++      BQ27000_MLI_L, /* Max Load Current H L */
++      BQ27000_MLI_H,
++      BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
++      BQ27000_MLTTE_H,
++      BQ27000_SAE_L, /* Available Energy H L */
++      BQ27000_SAE_H,
++      BQ27000_AP_L, /* Available Power H L */
++      BQ27000_AP_H,
++      BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
++      BQ27000_TTECP_H,
++      BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
++      BQ27000_CYCL_H,
++      BQ27000_CYCT_L, /* Cycle Count Total H L */
++      BQ27000_CYCT_H,
++      BQ27000_CSOC, /* Compensated State Of Charge */
++      /* EEPROM regs */
++              /* read-write after this */
++      BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
++      BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
++      BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
++      BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
++      BQ27000_EE_ISLC, /* Initial Standby Load Current */
++      BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
++      BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
++      BQ27000_EE_PKCFG, /* Pack Configuration Values */
++      BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
++      BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
++      BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
++};
++
++enum bq27000_status_flags {
++      BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
++      BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
++      BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
++      BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely  innacurate */
++      BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
++      BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
++      BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
++      BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
++};
++
++#define NANOVOLTS_UNIT 3750
++
++struct bq27000_bat_regs {
++      int             ai;
++      int             flags;
++      int             lmd;
++      int             rsoc;
++      int             temp;
++      int             tte;
++      int             ttf;
++      int             volt;
++};
++
++struct bq27000_device_info {
++      struct device *dev;
++      struct power_supply bat;
++      struct power_supply ac;
++      struct power_supply usb;
++      struct delayed_work work;
++      struct bq27000_platform_data *pdata;
++
++      struct bq27000_bat_regs regs;
++};
++
++static unsigned int cache_time = 5000;
++module_param(cache_time, uint, 0644);
++MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
++
++/*
++ * reading 16 bit values over HDQ has a special hazard where the
++ * hdq device firmware can update the 16-bit register during the time we
++ * read the two halves.  TI document SLUS556D recommends the algorithm here
++ * to avoid trouble
++ */
++
++static int hdq_read16(struct bq27000_device_info *di, int address)
++{
++      int acc;
++      int high;
++      int retries = 3;
++
++      while (retries--) {
++
++              high = (di->pdata->hdq_read)(address + 1); /* high part */
++
++              if (high < 0)
++                      return high;
++              acc = (di->pdata->hdq_read)(address);
++              if (acc < 0)
++                      return acc;
++
++              /* confirm high didn't change between reading it and low */
++              if (high == (di->pdata->hdq_read)(address + 1))
++                      return (high << 8) | acc;
++      }
++
++      return -ETIME;
++}
++
++static void bq27000_battery_external_power_changed(struct power_supply *psy)
++{
++      struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
++
++      dev_dbg(di->dev, "%s\n", __FUNCTION__);
++      schedule_delayed_work(&di->work, 0);
++}
++
++static int bq27000_battery_get_property(struct power_supply *psy,
++                                     enum power_supply_property psp,
++                                     union power_supply_propval *val)
++{
++      int n;
++      struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
++
++      switch (psp) {
++      case POWER_SUPPLY_PROP_STATUS:
++              val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
++
++              if (!di->pdata->get_charger_online_status)
++                      goto use_bat;
++              if ((di->pdata->get_charger_online_status)()) {
++                      /*
++                       * charger is definitively present
++                       * we report our state in terms of what it says it
++                       * is doing
++                       */
++                      if (!di->pdata->get_charger_active_status)
++                              goto use_bat;
++
++                      if ((di->pdata->get_charger_active_status)()) {
++                              val->intval = POWER_SUPPLY_STATUS_CHARGING;
++                              break;
++                      }
++                      val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
++                      break;
++              }
++
++              /*
++               * platform provided definite indication of charger presence,
++               * and it is telling us it isn't there... but we are on so we
++               * must be running from battery --->
++               */
++
++              val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
++              break;
++
++use_bat:
++              /*
++               * either the charger is not connected, or the
++               * platform doesn't give info about charger, use battery state
++               * but... battery state can be out of date by 4 seconds or
++               * so... use the platform callbacks if possible.
++               */
++
++              /* no real activity on the battery */
++              if (di->regs.ai < 2) {
++                      if (!di->regs.ttf)
++                              val->intval = POWER_SUPPLY_STATUS_FULL;
++                      else
++                              val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
++                      break;
++              }
++              /* power is actually going in or out... */
++              if (di->regs.flags < 0)
++                      return di->regs.flags;
++              if (di->regs.flags & BQ27000_STATUS_CHGS)
++                      val->intval = POWER_SUPPLY_STATUS_CHARGING;
++              else
++                      val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
++              break;
++      case POWER_SUPPLY_PROP_HEALTH:
++              val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
++              /* Do we have accurate readings... */
++              if (di->regs.flags < 0)
++                      return di->regs.flags;
++              if (di->regs.flags & BQ27000_STATUS_VDQ)
++                      val->intval = POWER_SUPPLY_HEALTH_GOOD;
++              break;
++      case POWER_SUPPLY_PROP_VOLTAGE_NOW:
++              if (di->regs.volt < 0)
++                      return di->regs.volt;
++              /* mV -> uV */
++              val->intval = di->regs.volt * 1000;
++              break;
++      case POWER_SUPPLY_PROP_CURRENT_NOW:
++              if (di->regs.flags < 0)
++                      return di->regs.flags;
++              if (di->regs.flags & BQ27000_STATUS_CHGS)
++                      n = -NANOVOLTS_UNIT;
++              else
++                      n = NANOVOLTS_UNIT;
++              if (di->regs.ai < 0)
++                      return di->regs.ai;
++              val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
++              break;
++      case POWER_SUPPLY_PROP_CHARGE_FULL:
++              if (di->regs.lmd < 0)
++                      return di->regs.lmd;
++              val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
++              break;
++      case POWER_SUPPLY_PROP_TEMP:
++              if (di->regs.temp < 0)
++                      return di->regs.temp;
++              /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
++              /* 10926 = 27315 * 4 / 10 */
++              val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
++              break;
++      case POWER_SUPPLY_PROP_TECHNOLOGY:
++              val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
++              break;
++      case POWER_SUPPLY_PROP_CAPACITY:
++              val->intval = di->regs.rsoc;
++              if (val->intval < 0)
++                      return val->intval;
++              break;
++      case POWER_SUPPLY_PROP_PRESENT:
++              val->intval = !(di->regs.rsoc < 0);
++              break;
++      case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
++              if (di->regs.tte < 0)
++                      return di->regs.tte;
++              val->intval = 60 * di->regs.tte;
++              break;
++      case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
++              if (di->regs.ttf < 0)
++                      return di->regs.ttf;
++              val->intval = 60 * di->regs.ttf;
++              break;
++      case POWER_SUPPLY_PROP_ONLINE:
++              if (di->pdata->get_charger_online_status)
++                      val->intval = (di->pdata->get_charger_online_status)();
++              else
++                      return -EINVAL;
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++static void bq27000_battery_work(struct work_struct *work)
++{
++      struct bq27000_device_info *di =
++              container_of(work, struct bq27000_device_info, work.work);
++
++      if ((di->pdata->hdq_initialized)()) {
++              struct bq27000_bat_regs regs;
++
++              regs.ai    = hdq_read16(di, BQ27000_AI_L);
++              regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
++              regs.lmd   = hdq_read16(di, BQ27000_LMD_L);
++              regs.rsoc  = (di->pdata->hdq_read)(BQ27000_RSOC);
++              regs.temp  = hdq_read16(di, BQ27000_TEMP_L);
++              regs.tte   = hdq_read16(di, BQ27000_TTE_L);
++              regs.ttf   = hdq_read16(di, BQ27000_TTF_L);
++              regs.volt  = hdq_read16(di, BQ27000_VOLT_L);
++
++              if (memcmp (&regs, &di->regs, sizeof(regs)) != 0) {
++                      di->regs = regs;
++                      power_supply_changed(&di->bat);
++              }
++      }
++
++      if (!schedule_delayed_work(&di->work, cache_time))
++              dev_err(di->dev, "battery service reschedule failed\n");
++}
++
++static enum power_supply_property bq27000_battery_props[] = {
++      POWER_SUPPLY_PROP_STATUS,
++      POWER_SUPPLY_PROP_HEALTH,
++      POWER_SUPPLY_PROP_VOLTAGE_NOW,
++      POWER_SUPPLY_PROP_CURRENT_NOW,
++      POWER_SUPPLY_PROP_CHARGE_FULL,
++      POWER_SUPPLY_PROP_TEMP,
++      POWER_SUPPLY_PROP_TECHNOLOGY,
++      POWER_SUPPLY_PROP_PRESENT,
++      POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
++      POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
++      POWER_SUPPLY_PROP_CAPACITY,
++      POWER_SUPPLY_PROP_ONLINE
++};
++
++static int bq27000_battery_probe(struct platform_device *pdev)
++{
++      int retval = 0;
++      struct bq27000_device_info *di;
++      struct bq27000_platform_data *pdata;
++
++      dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
++
++      di = kzalloc(sizeof(*di), GFP_KERNEL);
++      if (!di) {
++              retval = -ENOMEM;
++              goto di_alloc_failed;
++      }
++
++      platform_set_drvdata(pdev, di);
++
++      pdata = pdev->dev.platform_data;
++      di->dev         = &pdev->dev;
++      /* di->w1_dev        = pdev->dev.parent; */
++      di->bat.name       = pdata->name;
++      di->bat.type       = POWER_SUPPLY_TYPE_BATTERY;
++      di->bat.properties     = bq27000_battery_props;
++      di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
++      di->bat.get_property   = bq27000_battery_get_property;
++      di->bat.external_power_changed =
++                                bq27000_battery_external_power_changed;
++      di->bat.use_for_apm = 1;
++      di->pdata = pdata;
++
++      retval = power_supply_register(&pdev->dev, &di->bat);
++      if (retval) {
++              dev_err(di->dev, "failed to register battery\n");
++              goto batt_failed;
++      }
++
++      INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
++
++      if (!schedule_delayed_work(&di->work, 0))
++              dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
++
++      return 0;
++
++batt_failed:
++      kfree(di);
++di_alloc_failed:
++      return retval;
++}
++
++static int bq27000_battery_remove(struct platform_device *pdev)
++{
++      struct bq27000_device_info *di = platform_get_drvdata(pdev);
++
++      cancel_delayed_work(&di->work);
++
++      power_supply_unregister(&di->bat);
++
++      return 0;
++}
++
++void bq27000_charging_state_change(struct platform_device *pdev)
++{
++      struct bq27000_device_info *di = platform_get_drvdata(pdev);
++
++      if (!di)
++          return;
++}
++EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
++
++#ifdef CONFIG_PM
++
++static int bq27000_battery_suspend(struct platform_device *pdev,
++                                pm_message_t state)
++{
++      struct bq27000_device_info *di = platform_get_drvdata(pdev);
++
++      cancel_delayed_work(&di->work);
++      return 0;
++}
++
++static int bq27000_battery_resume(struct platform_device *pdev)
++{
++      struct bq27000_device_info *di = platform_get_drvdata(pdev);
++
++      schedule_delayed_work(&di->work, 0);
++      return 0;
++}
++
++#else
++
++#define bq27000_battery_suspend NULL
++#define bq27000_battery_resume NULL
++
++#endif /* CONFIG_PM */
++
++static struct platform_driver bq27000_battery_driver = {
++      .driver = {
++              .name = "bq27000-battery",
++      },
++      .probe    = bq27000_battery_probe,
++      .remove   = bq27000_battery_remove,
++      .suspend  = bq27000_battery_suspend,
++      .resume   = bq27000_battery_resume,
++};
++
++static int __init bq27000_battery_init(void)
++{
++      return platform_driver_register(&bq27000_battery_driver);
++}
++
++static void __exit bq27000_battery_exit(void)
++{
++      platform_driver_unregister(&bq27000_battery_driver);
++}
++
++module_init(bq27000_battery_init);
++module_exit(bq27000_battery_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("bq27000 battery driver");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/gta01_battery.c linux-2.6.29-rc3.owrt.om/drivers/power/gta01_battery.c
+--- linux-2.6.29-rc3.owrt/drivers/power/gta01_battery.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/power/gta01_battery.c     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,117 @@
++/*
++ * Dumb driver for gta01 battery
++ *
++ * Copyright 2009 Openmoko, Inc
++ * Balaji Rao <balajirrao@openmoko.org>
++ */
++
++#include <linux/module.h>
++#include <linux/param.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++#include <linux/gta01_battery.h>
++
++struct gta01_battery {
++      struct power_supply psy;
++      struct gta01_bat_platform_data *pdata;
++};
++
++static enum power_supply_property gta01_bat_props[] = {
++      POWER_SUPPLY_PROP_PRESENT,
++      POWER_SUPPLY_PROP_STATUS,
++      POWER_SUPPLY_PROP_VOLTAGE_NOW,
++      POWER_SUPPLY_PROP_CURRENT_NOW,
++};
++
++static int gta01_bat_get_property(struct power_supply *psy,
++                                     enum power_supply_property psp,
++                                     union power_supply_propval *val)
++{
++      struct gta01_battery *bat = container_of(psy, struct gta01_battery, psy);
++      
++      switch(psp) {
++      case POWER_SUPPLY_PROP_STATUS:
++              if (bat->pdata->get_charging_status())
++                      val->intval = POWER_SUPPLY_STATUS_CHARGING;
++              else
++                      val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
++              break;
++      case POWER_SUPPLY_PROP_VOLTAGE_NOW:
++              val->intval = bat->pdata->get_voltage();
++              break;
++      case POWER_SUPPLY_PROP_CURRENT_NOW:
++              val->intval = bat->pdata->get_current();
++              break;
++      case POWER_SUPPLY_PROP_PRESENT:
++              val->intval = 1; /* You must never run GTA01 without battery. */
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++static void gta01_bat_ext_changed(struct power_supply *psy)
++{
++      struct gta01_battery *bat = container_of(psy, struct gta01_battery, psy);
++      power_supply_changed(&bat->psy);
++}
++
++static int gta01_battery_probe(struct platform_device *pdev)
++{
++      struct gta01_battery *gta01_bat;
++
++      gta01_bat = kzalloc(sizeof(*gta01_bat), GFP_KERNEL);
++      if (!gta01_bat)
++              return -ENOMEM;
++
++      gta01_bat->psy.name = "battery";
++      gta01_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
++      gta01_bat->psy.properties = gta01_bat_props;
++      gta01_bat->psy.num_properties = ARRAY_SIZE(gta01_bat_props);
++      gta01_bat->psy.get_property = gta01_bat_get_property;
++      gta01_bat->psy.external_power_changed = gta01_bat_ext_changed;
++
++      gta01_bat->pdata = pdev->dev.platform_data;
++      power_supply_register(&pdev->dev, &gta01_bat->psy);
++
++      return 0;
++}
++
++static int gta01_battery_remove(struct platform_device *pdev)
++{
++      struct gta01_battery *bat = platform_get_drvdata(pdev);
++
++      power_supply_unregister(&bat->psy);
++      kfree(bat);
++
++      return 0;
++}
++
++static struct platform_driver gta01_battery_driver = {
++      .driver = {
++              .name = "gta01_battery",
++      },
++      .probe    = gta01_battery_probe,
++      .remove   = gta01_battery_remove,
++};
++
++static int __init gta01_battery_init(void)
++{
++      return platform_driver_register(&gta01_battery_driver);
++}
++
++static void __exit gta01_battery_exit(void)
++{
++      platform_driver_unregister(&gta01_battery_driver);
++}
++
++module_init(gta01_battery_init);
++module_exit(gta01_battery_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("gta01 battery driver");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/hdq.c linux-2.6.29-rc3.owrt.om/drivers/power/hdq.c
+--- linux-2.6.29-rc3.owrt/drivers/power/hdq.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/power/hdq.c       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,515 @@
++/*
++ * HDQ generic GPIO bitbang driver using FIQ
++ *
++ * (C) 2006-2007 by Openmoko, Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/hdq.h>
++
++#define HDQ_READ 0
++#define HDQ_WRITE 0x80
++
++enum hdq_bitbang_states {
++      HDQB_IDLE = 0,
++      HDQB_TX_BREAK,
++      HDQB_TX_BREAK_RECOVERY,
++      HDQB_ADS_CALC,
++      HDQB_ADS_LOW,
++      HDQB_ADS_HIGH,
++      HDQB_WAIT_RX,
++      HDQB_DATA_RX_LOW,
++      HDQB_DATA_RX_HIGH,
++      HDQB_WAIT_TX,
++};
++
++static struct hdq_priv {
++      u8 hdq_probed; /* nonzero after HDQ driver probed */
++      struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
++      unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
++      u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
++      u8 hdq_tx_data; /* data to tx for write action */
++      u8 hdq_rx_data; /* data received in read action */
++      u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
++      u8 hdq_transaction_ctr; /* incremented after each transfer */
++      u8 hdq_error; /* 0 = no error */
++      u8 hdq_ctr;
++      u8 hdq_ctr2;
++      u8 hdq_bit;
++      u8 hdq_shifter;
++      u8 hdq_tx_data_done;
++      enum hdq_bitbang_states hdq_state;
++      int reported_error;
++
++      struct hdq_platform_data *pdata;
++} hdq_priv;
++
++
++static void hdq_bad(void)
++{
++      if (!hdq_priv.reported_error)
++              printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
++      hdq_priv.reported_error = 1;
++}
++
++static void hdq_good(void)
++{
++      if (hdq_priv.reported_error)
++              printk(KERN_INFO "HDQ responds again\n");
++      hdq_priv.reported_error = 0;
++}
++
++int hdq_fiq_handler(void)
++{
++      if (!hdq_priv.hdq_probed)
++              return 0;
++
++      switch (hdq_priv.hdq_state) {
++      case HDQB_IDLE:
++              if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
++                      break;
++              hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
++              hdq_priv.pdata->gpio_set(0);
++              hdq_priv.pdata->gpio_dir_out();
++              hdq_priv.hdq_tx_data_done = 0;
++              hdq_priv.hdq_state = HDQB_TX_BREAK;
++              break;
++
++      case HDQB_TX_BREAK: /* issue low for > 190us */
++              if (--hdq_priv.hdq_ctr == 0) {
++                      hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
++                      hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
++                      hdq_priv.pdata->gpio_set(1);
++              }
++              break;
++
++      case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
++              if (--hdq_priv.hdq_ctr)
++                      break;
++              hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
++              hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
++              hdq_priv.hdq_tx_data_done = 0; /* doing ads */
++              /* fallthru on last one */
++      case HDQB_ADS_CALC:
++              if (hdq_priv.hdq_shifter & 1)
++                      hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
++              else
++                      hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
++              /* carefully precompute the other phase length */
++              hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
++                              HDQ_SAMPLE_PERIOD_US;
++              hdq_priv.hdq_state = HDQB_ADS_LOW;
++              hdq_priv.hdq_shifter >>= 1;
++              hdq_priv.hdq_bit--;
++              hdq_priv.pdata->gpio_set(0);
++              break;
++
++      case HDQB_ADS_LOW:
++              if (--hdq_priv.hdq_ctr)
++                      break;
++              hdq_priv.pdata->gpio_set(1);
++              hdq_priv.hdq_state = HDQB_ADS_HIGH;
++              break;
++
++      case HDQB_ADS_HIGH:
++              if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
++                      break;
++              if (hdq_priv.hdq_bit) { /* more bits to do */
++                      hdq_priv.hdq_state = HDQB_ADS_CALC;
++                      break;
++              }
++              /* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */
++              if (hdq_priv.hdq_ctr2)
++                      break;
++              /* ok no more bits and very last state */
++              hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
++              /* FIXME 0 = read */
++              if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
++                       /* set delay before payload */
++                      hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
++                      /* already high, no need to write */
++                      hdq_priv.hdq_state = HDQB_WAIT_TX;
++                      break;
++              }
++              /* read the next byte */
++              hdq_priv.hdq_bit = 8; /* 8 bits of data */
++              hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
++              hdq_priv.hdq_state = HDQB_WAIT_RX;
++              hdq_priv.pdata->gpio_dir_in();
++              break;
++
++      case HDQB_WAIT_TX: /* issue low for > 40us */
++              if (--hdq_priv.hdq_ctr)
++                      break;
++              if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
++                      hdq_priv.hdq_tx_data_done++;
++                      hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
++                      hdq_priv.hdq_bit = 8; /* 8 bits of data */
++                      hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
++                      break;
++              }
++              hdq_priv.hdq_error = 0;
++              hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++              hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
++              /* idle in input mode, it's pulled up by 10K */
++              hdq_priv.pdata->gpio_dir_in();
++              break;
++
++      case HDQB_WAIT_RX: /* wait for battery to talk to us */
++              if (hdq_priv.pdata->gpio_get() == 0) {
++                      /* it talks to us! */
++                      hdq_priv.hdq_ctr2 = 1;
++                      hdq_priv.hdq_bit = 8; /* 8 bits of data */
++                      /* timeout */
++                      hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
++                      hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
++                      break;
++              }
++              if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
++                      hdq_priv.hdq_error = 1;
++                      hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++                      hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++              }
++              break;
++
++      /*
++       * HDQ basically works by measuring the low time of the bit cell
++       * 32-50us --> '1', 80 - 145us --> '0'
++       */
++
++      case HDQB_DATA_RX_LOW:
++              if (hdq_priv.pdata->gpio_get()) {
++                      hdq_priv.hdq_rx_data >>= 1;
++                      if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
++                              hdq_priv.hdq_rx_data |= 0x80;
++
++                      if (--hdq_priv.hdq_bit == 0) {
++                              hdq_priv.hdq_error = 0;
++                              hdq_priv.hdq_transaction_ctr =
++                                                      hdq_priv.hdq_request_ctr;
++
++                              hdq_priv.hdq_state = HDQB_IDLE;
++                      } else
++                              hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
++                      /* timeout */
++                      hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
++                      hdq_priv.hdq_ctr2 = 1;
++                      break;
++              }
++              hdq_priv.hdq_ctr2++;
++              if (--hdq_priv.hdq_ctr)
++                      break;
++               /* timed out, error */
++              hdq_priv.hdq_error = 2;
++              hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++              hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++              break;
++
++      case HDQB_DATA_RX_HIGH:
++              if (!hdq_priv.pdata->gpio_get()) {
++                      /* it talks to us! */
++                      hdq_priv.hdq_ctr2 = 1;
++                      /* timeout */
++                      hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
++                      hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
++                      break;
++              }
++              if (--hdq_priv.hdq_ctr)
++                      break;
++              /* timed out, error */
++              hdq_priv.hdq_error = 3;
++              hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
++
++              /* we're in input mode already */
++              hdq_priv.hdq_state = HDQB_IDLE; /* abort */
++              break;
++      }
++
++      /* Are we interested in keeping the FIQ source alive ? */
++      if (hdq_priv.hdq_state != HDQB_IDLE)
++              return 1;
++      else
++              return 0;
++}
++static int fiq_busy(void)
++{
++      int request = (volatile u8)hdq_priv.hdq_request_ctr;
++      int transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
++
++
++      return (request != transact);
++}
++
++int hdq_initialized(void)
++{
++      return hdq_priv.hdq_probed;
++}
++EXPORT_SYMBOL_GPL(hdq_initialized);
++
++int hdq_read(int address)
++{
++      int count_sleeps = 5;
++      int ret = -ETIME;
++
++      if (!hdq_priv.hdq_probed)
++              return -EINVAL;
++
++      mutex_lock(&hdq_priv.hdq_lock);
++
++      hdq_priv.hdq_error = 0;
++      hdq_priv.hdq_ads = address | HDQ_READ;
++      hdq_priv.hdq_request_ctr++;
++      hdq_priv.pdata->kick_fiq();
++      /*
++       * FIQ takes care of it while we block our calling process
++       * But we're not spinning -- other processes run normally while
++       * we wait for the result
++       */
++      while (count_sleeps--) {
++              msleep(10); /* valid transaction always completes in < 10ms */
++
++              if (fiq_busy())
++                      continue;
++
++              if (hdq_priv.hdq_error) {
++                      hdq_bad();
++                      goto done; /* didn't see a response in good time */
++              }
++              hdq_good();
++
++              ret = hdq_priv.hdq_rx_data;
++              goto done;
++      }
++
++done:
++      mutex_unlock(&hdq_priv.hdq_lock);
++      return ret;
++}
++EXPORT_SYMBOL_GPL(hdq_read);
++
++int hdq_write(int address, u8 data)
++{
++      int count_sleeps = 5;
++      int ret = -ETIME;
++
++      if (!hdq_priv.hdq_probed)
++              return -EINVAL;
++
++      mutex_lock(&hdq_priv.hdq_lock);
++
++      hdq_priv.hdq_error = 0;
++      hdq_priv.hdq_ads = address | HDQ_WRITE;
++      hdq_priv.hdq_tx_data = data;
++      hdq_priv.hdq_request_ctr++;
++      hdq_priv.pdata->kick_fiq();
++      /*
++       * FIQ takes care of it while we block our calling process
++       * But we're not spinning -- other processes run normally while
++       * we wait for the result
++       */
++      while (count_sleeps--) {
++              msleep(10); /* valid transaction always completes in < 10ms */
++
++              if (fiq_busy())
++                      continue; /* something bad with FIQ */
++
++              if (hdq_priv.hdq_error) {
++                      hdq_bad();
++                      goto done; /* didn't see a response in good time */
++              }
++              hdq_good();
++
++              ret = 0;
++              goto done;
++      }
++
++done:
++      mutex_unlock(&hdq_priv.hdq_lock);
++      return ret;
++}
++EXPORT_SYMBOL_GPL(hdq_write);
++
++/* sysfs */
++
++static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
++                       char *buf)
++{
++      int n;
++      int v;
++      u8 u8a[128]; /* whole address space for HDQ */
++      char *end = buf;
++
++      if (!hdq_priv.hdq_probed)
++              return -EINVAL;
++
++      /* the dump does not take care about 16 bit regs, because at this
++       * bus level we don't know about the chip details
++       */
++      for (n = 0; n < sizeof(u8a); n++) {
++              v = hdq_read(n);
++              if (v < 0)
++                      goto bail;
++              u8a[n] = v;
++      }
++
++      for (n = 0; n < sizeof(u8a); n += 16) {
++              hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
++              end += strlen(end);
++              *end++ = '\n';
++              *end = '\0';
++      }
++      return (end - buf);
++
++bail:
++      return sprintf(buf, "ERROR %d\n", v);
++}
++
++/* you write by <address> <data>, eg, "34 128" */
++
++#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
++
++static ssize_t hdq_sysfs_write(struct device *dev,
++                             struct device_attribute *attr,
++                             const char *buf, size_t count)
++{
++      const char *end = buf + count;
++      int address = atoi(buf);
++
++      if (!hdq_priv.hdq_probed)
++              return -EINVAL;
++
++      while ((buf != end) && (*buf != ' '))
++              buf++;
++      if (buf >= end)
++              return 0;
++      while ((buf < end) && (*buf == ' '))
++              buf++;
++      if (buf >= end)
++              return 0;
++
++      hdq_write(address, atoi(buf));
++
++      return count;
++}
++
++static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
++static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
++
++static struct attribute *hdq_sysfs_entries[] = {
++      &dev_attr_dump.attr,
++      &dev_attr_write.attr,
++      NULL
++};
++
++static struct attribute_group hdq_attr_group = {
++      .name   = "hdq",
++      .attrs  = hdq_sysfs_entries,
++};
++
++
++#ifdef CONFIG_PM
++static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      /* after 18s of this, the battery monitor will also go to sleep */
++      hdq_priv.pdata->gpio_dir_in();
++      hdq_priv.pdata->disable_fiq();
++      return 0;
++}
++
++static int hdq_resume(struct platform_device *pdev)
++{
++      hdq_priv.pdata->gpio_set(1);
++      hdq_priv.pdata->gpio_dir_out();
++      hdq_priv.pdata->enable_fiq();
++      return 0;
++}
++#endif
++
++static int __init hdq_probe(struct platform_device *pdev)
++{
++      struct resource *r = platform_get_resource(pdev, 0, 0);
++      int ret;
++      struct hdq_platform_data *pdata = pdev->dev.platform_data;
++
++      if (!r || !pdata)
++              return -EINVAL;
++              
++      platform_set_drvdata(pdev, NULL);
++
++      mutex_init(&hdq_priv.hdq_lock);
++
++      /* set our HDQ comms pin from the platform data */
++      hdq_priv.hdq_gpio_pin = r->start;
++      hdq_priv.pdata = pdata;
++
++      hdq_priv.pdata->gpio_set(1);
++      hdq_priv.pdata->gpio_dir_out();
++
++      /* Initialize FIQ */
++      if (hdq_priv.pdata->enable_fiq() < 0) {
++              dev_err(&pdev->dev, "Could not enable FIQ source\n");
++              return -EINVAL;
++      }
++
++      ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group);
++      if (ret)
++              return ret;
++
++      hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
++
++      /*
++       * if wanted, users can defer registration of devices
++       * that depend on HDQ until after we register, and can use our
++       * device as parent so suspend-resume ordering is correct
++       */
++      if (pdata->attach_child_devices)
++              (pdata->attach_child_devices)(&pdev->dev);
++
++      hdq_priv.pdata = pdata;
++
++      return 0;
++}
++
++static int hdq_remove(struct platform_device *pdev)
++{
++      sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group);
++      return 0;
++}
++
++static struct platform_driver hdq_driver = {
++      .probe          = hdq_probe,
++      .remove         = hdq_remove,
++#ifdef CONFIG_PM
++      .suspend        = hdq_suspend,
++      .resume         = hdq_resume,
++#endif
++      .driver         = {
++              .name           = "hdq",
++      },
++};
++
++static int __init hdq_init(void)
++{
++      return platform_driver_register(&hdq_driver);
++}
++
++static void __exit hdq_exit(void)
++{
++      platform_driver_unregister(&hdq_driver);
++}
++
++module_init(hdq_init);
++module_exit(hdq_exit);
++
++MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
++MODULE_DESCRIPTION("HDQ driver");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/Kconfig linux-2.6.29-rc3.owrt.om/drivers/power/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/power/Kconfig        2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/power/Kconfig     2009-05-10 22:28:00.000000000 +0200
+@@ -88,4 +88,27 @@
+       help
+        Say Y to include support for NXP PCF50633 Main Battery Charger.
++config BATTERY_BQ27000_HDQ
++      tristate "BQ27000 HDQ battery monitor driver"
++      help
++        Say Y to enable support for the battery on the Neo Freerunner
++
++config HDQ_GPIO_BITBANG
++      bool "Generic gpio based HDQ bitbang"
++      help
++        Say Y to enable supoort for generic gpio based HDQ bitbang driver.
++        This can not be built as a module.
++
++config CHARGER_PCF50606
++      tristate "Support for NXP PCF50606 MBC"
++      depends on MFD_PCF50606
++      help
++       Say Y to include support for NXP PCF50606 Battery Charger.
++
++config BATTERY_GTA01
++      tristate "GTA01 battery driver"
++      help
++        Say Y here to enable this dumb driver for dumb gta01 batteries
++
+ endif # POWER_SUPPLY
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/Makefile linux-2.6.29-rc3.owrt.om/drivers/power/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/power/Makefile       2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/power/Makefile    2009-05-10 22:28:00.000000000 +0200
+@@ -25,4 +25,10 @@
+ obj-$(CONFIG_BATTERY_WM97XX)  += wm97xx_battery.o
+ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
+ obj-$(CONFIG_BATTERY_DA9030)  += da9030_battery.o
+-obj-$(CONFIG_CHARGER_PCF50633)        += pcf50633-charger.o
+\ No newline at end of file
++obj-$(CONFIG_CHARGER_PCF50633)        += pcf50633-charger.o
++obj-$(CONFIG_CHARGER_PCF50606)        += pcf50606-charger.o
++obj-$(CONFIG_BATTERY_PALMTX)  += palmtx_battery.o
++obj-$(CONFIG_BATTERY_BQ27000_HDQ)     += bq27000_battery.o
++obj-$(CONFIG_BATTERY_GTA01)   += gta01_battery.o
++
++obj-$(CONFIG_HDQ_GPIO_BITBANG)  += hdq.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/pcf50606-charger.c linux-2.6.29-rc3.owrt.om/drivers/power/pcf50606-charger.c
+--- linux-2.6.29-rc3.owrt/drivers/power/pcf50606-charger.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/power/pcf50606-charger.c  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,244 @@
++/* NXP PCF50606 Main Battery Charger Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green and Werner Almesberger
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/device.h>
++#include <linux/sysfs.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/mbc.h>
++
++struct pcf50606_mbc {
++      struct pcf50606 *pcf;
++
++      int charger_online;
++      struct power_supply charger;
++};
++
++void pcf50606_charge_fast(struct pcf50606 *pcf, int on)
++{
++      struct pcf50606_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
++
++      /*
++       * This is a fix to work around boot-time ordering problems if
++       * the s3c2410_udc is initialized before the pcf50606 mbc is
++       * ready.
++       */
++      if (!mbc)
++              return;
++
++      if (on) {
++              pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++                               PCF50606_MBCC1_AUTOFST,
++                               PCF50606_MBCC1_AUTOFST);\
++                      mbc->charger_online = 1;
++      } else {
++              /* disable automatic fast-charge */
++              pcf50606_reg_clear_bits(pcf, PCF50606_REG_MBCC1,
++                                      PCF50606_MBCC1_AUTOFST);
++              /* switch to idle mode to abort existing charge process */
++              pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++                              PCF50606_MBCC1_CHGMOD_MASK,
++                              PCF50606_MBCC1_CHGMOD_IDLE);
++                      mbc->charger_online = 0;
++      }
++}
++EXPORT_SYMBOL_GPL(pcf50606_charge_fast);
++
++static ssize_t
++show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
++{
++      struct pcf50606_mbc *mbc = dev_get_drvdata(dev);
++
++      u8 mbcc1 = pcf50606_reg_read(mbc->pcf, PCF50606_REG_MBCC1);
++      u8 chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK);
++
++      return sprintf(buf, "%d\n", chgmod);
++}
++
++static ssize_t set_chgmode(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct pcf50606_mbc *mbc = dev_get_drvdata(dev);
++      u_int8_t mbcc1 = pcf50606_reg_read(mbc->pcf, PCF50606_REG_MBCC1);
++
++      mbcc1 &= ~PCF50606_MBCC1_CHGMOD_MASK;
++
++      if (!strcmp(buf, "qualification"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_QUAL;
++      else if (!strcmp(buf, "pre"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_PRE;
++      else if (!strcmp(buf, "trickle"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_TRICKLE;
++      else if (!strcmp(buf, "fast_cccv"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_FAST_CCCV;
++      /* We don't allow the other fast modes for security reasons */
++      else if (!strcmp(buf, "idle"))
++              mbcc1 |= PCF50606_MBCC1_CHGMOD_IDLE;
++      else
++              return -EINVAL;
++
++      pcf50606_reg_write(mbc->pcf, PCF50606_REG_MBCC1, mbcc1);
++
++      return count;
++}
++
++static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, set_chgmode);
++
++
++static struct attribute *pcf50606_mbc_sysfs_entries[] = {
++      &dev_attr_chgmode.attr,
++      NULL,
++};
++
++static struct attribute_group mbc_attr_group = {
++      .name   = NULL,                 /* put in device directory */
++      .attrs  = pcf50606_mbc_sysfs_entries,
++};
++
++static void
++pcf50606_mbc_irq_handler(int irq, void *data)
++{
++      struct pcf50606_mbc *mbc = data;
++
++      power_supply_changed(&mbc->charger);
++
++      if (mbc->pcf->pdata->mbc_event_callback)
++              mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
++}
++
++static int charger_get_property(struct power_supply *psy,
++                      enum power_supply_property psp,
++                      union power_supply_propval *val)
++{
++      struct pcf50606_mbc *mbc = container_of(psy, struct pcf50606_mbc, charger);
++      int ret = 0;
++
++      switch (psp) {
++      case POWER_SUPPLY_PROP_ONLINE:
++              val->intval =  mbc->charger_online;
++              break;
++      default:
++              ret = -EINVAL;
++              break;
++      }
++      return ret;
++}
++
++static enum power_supply_property power_props[] = {
++      POWER_SUPPLY_PROP_ONLINE,
++};
++
++static const u8 mbc_irq_handlers[] = {
++      PCF50606_IRQ_CHGINS,
++      PCF50606_IRQ_CHGRM,
++      PCF50606_IRQ_CHGFOK,
++      PCF50606_IRQ_CHGERR,
++      PCF50606_IRQ_CHGFRDY,
++      PCF50606_IRQ_CHGPROT,
++};
++
++static int __devinit pcf50606_mbc_probe(struct platform_device *pdev)
++{
++      struct pcf50606_mbc *mbc;
++      struct pcf50606_subdev_pdata *pdata = pdev->dev.platform_data;
++      int ret;
++      int i;
++      u8 oocs;
++
++      mbc = kzalloc(sizeof(*mbc), GFP_KERNEL);
++      if (!mbc)
++              return -ENOMEM;
++
++      platform_set_drvdata(pdev, mbc);
++      mbc->pcf = pdata->pcf;
++
++      /* Set up IRQ handlers */
++      for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
++              pcf50606_register_irq(mbc->pcf, mbc_irq_handlers[i],
++                                      pcf50606_mbc_irq_handler, mbc);
++
++      mbc->charger.name               = "charger";
++      mbc->charger.type               = POWER_SUPPLY_TYPE_MAINS;
++      mbc->charger.properties         = power_props;
++      mbc->charger.num_properties     = ARRAY_SIZE(power_props);
++      mbc->charger.get_property       = &charger_get_property;
++      mbc->charger.supplied_to        = mbc->pcf->pdata->batteries;
++      mbc->charger.num_supplicants    = mbc->pcf->pdata->num_batteries;
++
++      ret = power_supply_register(&pdev->dev, &mbc->charger);
++      if (ret) {
++              dev_err(mbc->pcf->dev, "failed to register charger\n");
++              kfree(mbc);
++              return ret;
++      }
++
++      ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
++      if (ret)
++              dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
++
++      oocs = pcf50606_reg_read(mbc->pcf, PCF50606_REG_OOCS);
++      if (oocs & PCF50606_OOCS_CHGOK)
++              pcf50606_mbc_irq_handler(PCF50606_IRQ_CHGINS, mbc);
++
++      return 0;
++}
++
++static int __devexit pcf50606_mbc_remove(struct platform_device *pdev)
++{
++      struct pcf50606_mbc *mbc = platform_get_drvdata(pdev);
++      int i;
++
++      /* Remove IRQ handlers */
++      for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
++              pcf50606_free_irq(mbc->pcf, mbc_irq_handlers[i]);
++
++      power_supply_unregister(&mbc->charger);
++
++      kfree(mbc);
++
++      return 0;
++}
++
++static struct platform_driver pcf50606_mbc_driver = {
++      .driver = {
++              .name = "pcf50606-mbc",
++      },
++      .probe = pcf50606_mbc_probe,
++      .remove = __devexit_p(pcf50606_mbc_remove),
++};
++
++static int __init pcf50606_mbc_init(void)
++{
++      return platform_driver_register(&pcf50606_mbc_driver);
++}
++module_init(pcf50606_mbc_init);
++
++static void __exit pcf50606_mbc_exit(void)
++{
++      platform_driver_unregister(&pcf50606_mbc_driver);
++}
++module_exit(pcf50606_mbc_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 mbc driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-mbc");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/power/pcf50633-charger.c linux-2.6.29-rc3.owrt.om/drivers/power/pcf50633-charger.c
+--- linux-2.6.29-rc3.owrt/drivers/power/pcf50633-charger.c     2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/power/pcf50633-charger.c  2009-05-10 22:28:00.000000000 +0200
+@@ -36,6 +36,9 @@
+       struct power_supply usb;
+       struct power_supply adapter;
++      struct power_supply ac;
++
++      struct delayed_work charging_restart_work;
+ };
+ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+@@ -43,15 +46,24 @@
+       struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+       int ret = 0;
+       u8 bits;
++      int charging_start = 1;
++      u8 mbcs2, chgmod;
++      unsigned int mbcc5;
+-      if (ma >= 1000)
++      if (ma >= 1000) {
+               bits = PCF50633_MBCC7_USB_1000mA;
+-      else if (ma >= 500)
++              ma = 1000;
++      } else if (ma >= 500) {
+               bits = PCF50633_MBCC7_USB_500mA;
+-      else if (ma >= 100)
++              ma = 500;
++      } else if (ma >= 100) {
+               bits = PCF50633_MBCC7_USB_100mA;
+-      else
++              ma = 100;
++      } else {
+               bits = PCF50633_MBCC7_USB_SUSPEND;
++              charging_start = 0;
++              ma = 0;
++      }
+       ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+                                       PCF50633_MBCC7_USB_MASK, bits);
+@@ -60,6 +72,37 @@
+       else
+               dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
++      /*
++       * We limit the charging current to be the USB current limit.
++       * The reason is that on pcf50633, when it enters PMU Standby mode,
++       * which it does when the device goes "off", the USB current limit
++       * reverts to the variant default.  In at least one common case, that
++       * default is 500mA.  By setting the charging current to be the same
++       * as the USB limit we set here before PMU standby, we enforce it only
++       * using the correct amount of current even when the USB current limit
++       * gets reset to the wrong thing
++       */
++
++      mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++      if (mbcc5 > 255)
++              mbcc5 = 255;
++      pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
++      mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
++      chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
++
++      /* If chgmod == BATFULL, setting chgena has no effect.
++       * We need to set resume instead.
++       */
++      if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
++              pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++                              PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
++      else
++              pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++                              PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
++
++      mbc->usb_active = charging_start;
++      
+       power_supply_changed(&mbc->usb);
+       return ret;
+@@ -84,21 +127,6 @@
+ }
+ EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+-void pcf50633_mbc_set_status(struct pcf50633 *pcf, int what, int status)
+-{
+-      struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+-
+-      if (what & PCF50633_MBC_USB_ONLINE)
+-              mbc->usb_online = !!status;
+-      if (what & PCF50633_MBC_USB_ACTIVE)
+-              mbc->usb_active = !!status;
+-      if (what & PCF50633_MBC_ADAPTER_ONLINE)
+-              mbc->adapter_online = !!status;
+-      if (what & PCF50633_MBC_ADAPTER_ACTIVE)
+-              mbc->adapter_active = !!status;
+-}
+-EXPORT_SYMBOL_GPL(pcf50633_mbc_set_status);
+-
+ static ssize_t
+ show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
+ {
+@@ -149,9 +177,44 @@
+ static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
++static ssize_t
++show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
++{
++      struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++      u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
++      unsigned int ma;
++
++      ma = (mbc->pcf->pdata->chg_ref_current_ma *  mbcc5) >> 8;
++
++      return sprintf(buf, "%u\n", ma);
++}
++
++static ssize_t set_chglim(struct device *dev,
++              struct device_attribute *attr, const char *buf, size_t count)
++{
++      struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++      unsigned long ma;
++      unsigned int mbcc5;
++      int ret;
++
++      ret = strict_strtoul(buf, 10, &ma);
++      if (ret)
++              return -EINVAL;
++
++      mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++      if (mbcc5 > 255)
++              mbcc5 = 255;
++      pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
++      return count;
++}
++
++static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
++
+ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
+       &dev_attr_chgmode.attr,
+       &dev_attr_usb_curlim.attr,
++      &dev_attr_chg_curlim.attr,
+       NULL,
+ };
+@@ -160,10 +223,44 @@
+       .attrs  = pcf50633_mbc_sysfs_entries,
+ };
++/* MBC state machine switches into charging mode when the battery voltage
++ * falls below 96% of a battery float voltage. But the voltage drop in Li-ion
++ * batteries is marginal(1~2 %) till about 80% of its capacity - which means,
++ * after a BATFULL, charging won't be restarted until 80%.
++ *
++ * This work_struct function restarts charging every few seconds and makes
++ * sure we don't discharge too much
++ */
++
++static void pcf50633_mbc_charging_restart(struct work_struct *work)
++{
++      struct pcf50633_mbc *mbc;
++      u8 mbcs2, chgmod;
++
++      mbc = container_of(work, struct pcf50633_mbc,
++                              charging_restart_work.work);
++
++      mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
++      chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
++
++      if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
++              return;
++
++      /* Restart charging */
++      pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1,
++                              PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
++      mbc->usb_active = 1;
++      power_supply_changed(&mbc->usb);
++
++      dev_info(mbc->pcf->dev, "Charging restarted\n");
++}
++
+ static void
+ pcf50633_mbc_irq_handler(int irq, void *data)
+ {
+       struct pcf50633_mbc *mbc = data;
++      int chg_restart_interval = 
++                      mbc->pcf->pdata->charging_restart_interval;
+       /* USB */
+       if (irq == PCF50633_IRQ_USBINS) {
+@@ -171,7 +268,8 @@
+       } else if (irq == PCF50633_IRQ_USBREM) {
+               mbc->usb_online = 0;
+               mbc->usb_active = 0;
+-              pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
++              pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);               
++              cancel_delayed_work_sync(&mbc->charging_restart_work);
+       }
+       /* Adapter */
+@@ -186,10 +284,18 @@
+       if (irq == PCF50633_IRQ_BATFULL) {
+               mbc->usb_active = 0;
+               mbc->adapter_active = 0;
+-      }
++
++              if (chg_restart_interval > 0)
++                      schedule_delayed_work(&mbc->charging_restart_work,
++                                                      chg_restart_interval);
++      } else if (irq == PCF50633_IRQ_USBLIMON)
++              mbc->usb_active = 0;
++      else if (irq == PCF50633_IRQ_USBLIMOFF)
++              mbc->usb_active = 1;
+       power_supply_changed(&mbc->usb);
+       power_supply_changed(&mbc->adapter);
++      power_supply_changed(&mbc->ac);
+       if (mbc->pcf->pdata->mbc_event_callback)
+               mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+@@ -199,7 +305,7 @@
+                       enum power_supply_property psp,
+                       union power_supply_propval *val)
+ {
+-      struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
++      struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, adapter);
+       int ret = 0;
+       switch (psp) {
+@@ -219,10 +325,34 @@
+ {
+       struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+       int ret = 0;
++      u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++                                              PCF50633_MBCC7_USB_MASK;
++
++      switch (psp) {
++      case POWER_SUPPLY_PROP_ONLINE:
++              val->intval = mbc->usb_online &&
++                              (usblim <= PCF50633_MBCC7_USB_500mA);
++              break;
++      default:
++              ret = -EINVAL;
++              break;
++      }
++      return ret;
++}
++
++static int ac_get_property(struct power_supply *psy,
++                      enum power_supply_property psp,
++                      union power_supply_propval *val)
++{
++      struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac);
++      int ret = 0;
++      u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++                                              PCF50633_MBCC7_USB_MASK;
+       switch (psp) {
+       case POWER_SUPPLY_PROP_ONLINE:
+-              val->intval = mbc->usb_online;
++              val->intval = mbc->usb_online &&
++                              (usblim == PCF50633_MBCC7_USB_1000mA);
+               break;
+       default:
+               ret = -EINVAL;
+@@ -287,6 +417,17 @@
+       mbc->usb.supplied_to            = mbc->pcf->pdata->batteries;
+       mbc->usb.num_supplicants        = mbc->pcf->pdata->num_batteries;
++      mbc->ac.name                    = "ac";
++      mbc->ac.type                    = POWER_SUPPLY_TYPE_MAINS;
++      mbc->ac.properties              = power_props;
++      mbc->ac.num_properties          = ARRAY_SIZE(power_props);
++      mbc->ac.get_property            = ac_get_property;
++      mbc->ac.supplied_to             = mbc->pcf->pdata->batteries;
++      mbc->ac.num_supplicants         = mbc->pcf->pdata->num_batteries;
++
++      INIT_DELAYED_WORK(&mbc->charging_restart_work,
++                              pcf50633_mbc_charging_restart);
++
+       ret = power_supply_register(&pdev->dev, &mbc->adapter);
+       if (ret) {
+               dev_err(mbc->pcf->dev, "failed to register adapter\n");
+@@ -302,6 +443,15 @@
+               return ret;
+       }
++      ret = power_supply_register(&pdev->dev, &mbc->ac);
++      if (ret) {
++              dev_err(mbc->pcf->dev, "failed to register ac\n");
++              power_supply_unregister(&mbc->adapter);
++              power_supply_unregister(&mbc->usb);
++              kfree(mbc);
++              return ret;
++      }
++      
+       ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
+       if (ret)
+               dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
+@@ -327,6 +477,8 @@
+       power_supply_unregister(&mbc->usb);
+       power_supply_unregister(&mbc->adapter);
++      cancel_delayed_work_sync(&mbc->charging_restart_work);
++
+       kfree(mbc);
+       return 0;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/regulator/core.c linux-2.6.29-rc3.owrt.om/drivers/regulator/core.c
+--- linux-2.6.29-rc3.owrt/drivers/regulator/core.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/regulator/core.c  2009-05-10 22:28:00.000000000 +0200
+@@ -1102,18 +1102,19 @@
+       struct regulator_dev *rdev = regulator->rdev;
+       int ret = 0;
+-      mutex_lock(&rdev->mutex);
+-      if (regulator->enabled == 1) {
+-              ret = _regulator_disable(rdev);
+-              if (ret == 0)
+-                      regulator->uA_load = 0;
+-      } else if (WARN(regulator->enabled <= 0,
+-                      "unbalanced disables for supply %s\n",
+-                      regulator->supply_name))
+-              ret = -EIO;
+-      if (ret == 0)
+-              regulator->enabled--;
+-      mutex_unlock(&rdev->mutex);
++      if (!regulator->enabled) {
++              printk(KERN_ERR "%s: not in use by this consumer\n",
++                      __func__);
++              WARN_ON(1);
++              return 0;
++      }
++
++      mutex_lock(&regulator->rdev->mutex);
++      regulator->enabled = 0;
++      regulator->uA_load = 0;
++      ret = _regulator_disable(regulator->rdev);
++      mutex_unlock(&regulator->rdev->mutex);
++
+       return ret;
+ }
+ EXPORT_SYMBOL_GPL(regulator_disable);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/regulator/Kconfig linux-2.6.29-rc3.owrt.om/drivers/regulator/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/regulator/Kconfig    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/regulator/Kconfig 2009-05-10 22:28:00.000000000 +0200
+@@ -80,4 +80,10 @@
+        Say Y here to support the voltage regulators and convertors
+        on PCF50633
++config REGULATOR_PCF50606
++      bool "PCF50606 regulator driver"
++        depends on MFD_PCF50606
++      help
++       Say Y here to support the voltage regulators and convertors
++       on PCF50606
+ endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/regulator/Makefile linux-2.6.29-rc3.owrt.om/drivers/regulator/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/regulator/Makefile   2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/regulator/Makefile        2009-05-10 22:28:00.000000000 +0200
+@@ -12,5 +12,6 @@
+ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+ obj-$(CONFIG_REGULATOR_DA903X)        += da903x.o
+ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
++obj-$(CONFIG_REGULATOR_PCF50606) += pcf50606-regulator.o
+ ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/regulator/pcf50606-regulator.c linux-2.6.29-rc3.owrt.om/drivers/regulator/pcf50606-regulator.c
+--- linux-2.6.29-rc3.owrt/drivers/regulator/pcf50606-regulator.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/regulator/pcf50606-regulator.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,380 @@
++/* NXP PCF50606 PMIC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte and Andy Green and Werner Almesberger
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/pmic.h>
++
++#define PCF50606_REGULATOR(_name, _id)                \
++      {                                       \
++              .name = _name,                  \
++              .id = _id,                      \
++              .ops = &pcf50606_regulator_ops, \
++              .type = REGULATOR_VOLTAGE,      \
++              .owner = THIS_MODULE,           \
++      }
++
++static const u8 pcf50606_regulator_registers[PCF50606_NUM_REGULATORS] = {
++      [PCF50606_REGULATOR_DCD]        = PCF50606_REG_DCDC1,
++      [PCF50606_REGULATOR_DCDE]       = PCF50606_REG_DCDEC1,
++      [PCF50606_REGULATOR_DCUD]       = PCF50606_REG_DCUDC1,
++      [PCF50606_REGULATOR_D1REG]      = PCF50606_REG_D1REGC1,
++      [PCF50606_REGULATOR_D2REG]      = PCF50606_REG_D2REGC1,
++      [PCF50606_REGULATOR_D3REG]      = PCF50606_REG_D3REGC1,
++      [PCF50606_REGULATOR_LPREG]      = PCF50606_REG_LPREGC1,
++      [PCF50606_REGULATOR_IOREG]      = PCF50606_REG_IOREGC,
++};
++
++static u8 dcudc_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      if (millivolts > 5500)
++              return 0x1f;
++      if (millivolts <= 3300) {
++              millivolts -= 900;
++              return millivolts/300;
++      }
++      if (millivolts < 4000)
++              return 0x0f;
++      else {
++              millivolts -= 4000;
++              return millivolts/100;
++      }
++}
++
++static unsigned int dcudc_2voltage(u8 bits)
++{
++      bits &= 0x1f;
++      if (bits < 0x08)
++              return 900 + bits * 300;
++      else if (bits < 0x10)
++              return 3300;
++      else
++              return 4000 + bits * 100;
++}
++
++static u8 dcdec_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3300)
++              return 0x0f;
++
++      millivolts -= 900;
++      return millivolts/300;
++}
++
++static unsigned int dcdec_2voltage(u8 bits)
++{
++      bits &= 0x0f;
++      return 900 + bits*300;
++}
++
++static u8 dcdc_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3600)
++              return 0x1f;
++
++      if (millivolts < 1500) {
++              millivolts -= 900;
++              return millivolts/25;
++      } else {
++              millivolts -= 1500;
++              return 0x18 + millivolts/300;
++      }
++}
++
++static unsigned int dcdc_2voltage(u8 bits)
++{
++      bits &= 0x1f;
++      if ((bits & 0x18) == 0x18)
++              return 1500 + ((bits & 0x7) * 300);
++      else
++              return 900 + (bits * 25);
++}
++
++static u8 dx_voltage(unsigned int millivolts)
++{
++      if (millivolts < 900)
++              return 0;
++      else if (millivolts > 3300)
++              return 0x18;
++
++      millivolts -= 900;
++      return millivolts/100;
++}
++
++static unsigned int dx_2voltage(u8 bits)
++{
++      bits &= 0x1f;
++      return 900 + (bits * 100);
++}
++
++static int pcf50606_regulator_set_voltage(struct regulator_dev *rdev,
++                                              int min_uV, int max_uV)
++{
++      struct pcf50606 *pcf;
++      int regulator_id, millivolts, rc;
++      u8 volt_bits, regnr;
++
++      pcf = rdev_get_drvdata(rdev);
++
++      regulator_id = rdev_get_id(rdev);
++      if (regulator_id >= PCF50606_NUM_REGULATORS)
++              return -EINVAL;
++
++      millivolts = min_uV / 1000;
++
++      switch (regulator_id) {
++      case PCF50606_REGULATOR_DCD:
++              volt_bits = dcdc_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_DCDC1, 0x1f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCDE:
++              volt_bits = dcdec_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_DCDEC1, 0x0f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCUD:
++              volt_bits = dcudc_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_DCUDC1, 0x1f,
++                                    volt_bits);
++              break;
++      case PCF50606_REGULATOR_D1REG:
++      case PCF50606_REGULATOR_D2REG:
++      case PCF50606_REGULATOR_D3REG:
++              regnr = PCF50606_REG_D1REGC1 +
++                              (regulator_id - PCF50606_REGULATOR_D1REG);
++              volt_bits = dx_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, regnr, 0x1f, volt_bits);
++              break;
++      case PCF50606_REGULATOR_LPREG:
++              volt_bits = dx_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_LPREGC1, 0x1f,
++                                            volt_bits);
++              break;
++      case PCF50606_REGULATOR_IOREG:
++              if (millivolts < 1800)
++                      return -EINVAL;
++              volt_bits = dx_voltage(millivolts);
++              rc = pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_IOREGC, 0x1f,
++                                            volt_bits);
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return rc;
++}
++
++static int pcf50606_regulator_get_voltage(struct regulator_dev *rdev)
++{
++      struct pcf50606 *pcf;
++      u8 volt_bits, regnr;
++      int rc = 0, regulator_id;
++
++
++      pcf = rdev_get_drvdata(rdev);
++
++      regulator_id = rdev_get_id(rdev);
++      if (regulator_id >= PCF50606_NUM_REGULATORS)
++              return -EINVAL;
++
++      switch (regulator_id) {
++      case PCF50606_REGULATOR_DCD:
++              volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCDC1) & 0x1f;
++              rc = dcdc_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCDE:
++              volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCDEC1) & 0x0f;
++              rc = dcdec_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_DCUD:
++              volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCUDC1) & 0x1f;
++              rc = dcudc_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_D1REG:
++      case PCF50606_REGULATOR_D2REG:
++      case PCF50606_REGULATOR_D3REG:
++              regnr = PCF50606_REG_D1REGC1 + (regulator_id - PCF50606_REGULATOR_D1REG);
++              volt_bits = pcf50606_reg_read(pcf, regnr) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_LPREG:
++              volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_LPREGC1) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      case PCF50606_REGULATOR_IOREG:
++              volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_IOREGC) & 0x1f;
++              if (volt_bits > 0x18)
++                      volt_bits = 0x18;
++              rc = dx_2voltage(volt_bits);
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return rc * 1000;
++
++}
++
++static int pcf50606_regulator_enable(struct regulator_dev *rdev)
++{
++      struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++      int regulator_id;
++      u8 regnr;
++
++      regulator_id = rdev_get_id(rdev);
++      if (regulator_id >= PCF50606_NUM_REGULATORS)
++              return -EINVAL;
++      
++      regnr = pcf50606_regulator_registers[regulator_id];
++
++      return pcf50606_reg_set_bit_mask(pcf, regnr, 0xe0, 0xe0);
++}
++
++static int pcf50606_regulator_disable(struct regulator_dev *rdev)
++{
++      struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++      int regulator_id;
++      u8 regnr;
++
++      regulator_id = rdev_get_id(rdev);
++      if (regulator_id >= PCF50606_NUM_REGULATORS)
++              return -EINVAL;
++
++      /* IOREG cannot be powered off since it powers the PMU I2C */
++      if (regulator_id == PCF50606_REGULATOR_IOREG)
++              return -EINVAL;
++      
++      regnr = pcf50606_regulator_registers[regulator_id];
++
++      return pcf50606_reg_set_bit_mask(pcf, regnr, 0xe0, 0);
++}
++
++static int pcf50606_regulator_is_enabled(struct regulator_dev *rdev)
++{
++      struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++      int regulator_id = rdev_get_id(rdev);
++      u8 regnr, val;
++
++      regulator_id = rdev_get_id(rdev);
++      if (regulator_id >= PCF50606_NUM_REGULATORS)
++              return -EINVAL;
++
++      /* the *ENA register is always one after the *OUT register */
++      regnr = pcf50606_regulator_registers[regulator_id];
++      val = (pcf50606_reg_read(pcf, regnr) & 0xe0) >> 5;
++
++      /* PWREN1 = 1, PWREN2 = 1, see table 16 of datasheet */
++      if (val == 0 || val == 5)
++              return 0;
++
++      return 1;
++}
++
++static struct regulator_ops pcf50606_regulator_ops = {
++      .set_voltage = pcf50606_regulator_set_voltage,
++      .get_voltage = pcf50606_regulator_get_voltage,
++      .enable = pcf50606_regulator_enable,
++      .disable = pcf50606_regulator_disable,
++      .is_enabled = pcf50606_regulator_is_enabled,
++};
++
++static struct regulator_desc regulators[] = {
++      [PCF50606_REGULATOR_DCD] =
++              PCF50606_REGULATOR("dcd", PCF50606_REGULATOR_DCD),
++      [PCF50606_REGULATOR_DCDE] =
++              PCF50606_REGULATOR("dcde", PCF50606_REGULATOR_DCDE),
++      [PCF50606_REGULATOR_DCUD] =
++              PCF50606_REGULATOR("dcud", PCF50606_REGULATOR_DCUD),
++      [PCF50606_REGULATOR_D1REG] =
++              PCF50606_REGULATOR("d1reg", PCF50606_REGULATOR_D1REG),
++      [PCF50606_REGULATOR_D2REG] =
++              PCF50606_REGULATOR("d2reg", PCF50606_REGULATOR_D2REG),
++      [PCF50606_REGULATOR_D3REG] =
++              PCF50606_REGULATOR("d3reg", PCF50606_REGULATOR_D3REG),
++      [PCF50606_REGULATOR_LPREG] =
++              PCF50606_REGULATOR("lpreg", PCF50606_REGULATOR_LPREG),
++      [PCF50606_REGULATOR_IOREG] =
++              PCF50606_REGULATOR("ioreg", PCF50606_REGULATOR_IOREG),
++};
++
++static int __devinit pcf50606_regulator_probe(struct platform_device *pdev)
++{
++      struct regulator_dev *rdev;
++      struct pcf50606 *pcf;
++
++      /* Already set by core driver */
++      pcf = platform_get_drvdata(pdev);
++
++      rdev = regulator_register(&regulators[pdev->id], &pdev->dev, pcf);
++      if (IS_ERR(rdev))
++              return PTR_ERR(rdev);
++
++      if (pcf->pdata->regulator_registered)
++              pcf->pdata->regulator_registered(pcf, pdev->id);
++
++      return 0;
++}
++
++static int __devexit pcf50606_regulator_remove(struct platform_device *pdev)
++{
++      struct regulator_dev *rdev = platform_get_drvdata(pdev);
++
++      regulator_unregister(rdev);
++
++      return 0;
++}
++
++static struct platform_driver pcf50606_regulator_driver = {
++      .driver = {
++              .name = "pcf50606-regltr",
++      },
++      .probe = pcf50606_regulator_probe,
++      .remove = __devexit_p(pcf50606_regulator_remove),
++};
++
++static int __init pcf50606_regulator_init(void)
++{
++      return platform_driver_register(&pcf50606_regulator_driver);
++}
++module_init(pcf50606_regulator_init);
++
++static void __exit pcf50606_regulator_exit(void)
++{
++      platform_driver_unregister(&pcf50606_regulator_driver);
++}
++module_exit(pcf50606_regulator_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 regulator driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-regulator");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/rtc/Kconfig linux-2.6.29-rc3.owrt.om/drivers/rtc/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/rtc/Kconfig  2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/rtc/Kconfig       2009-05-10 22:28:00.000000000 +0200
+@@ -223,6 +223,13 @@
+         This driver can also be built as a module. If so, the module
+         will be called rtc-pcf8583.
++config RTC_DRV_PCF50606
++      depends on MFD_PCF50606
++      tristate "Philips PCF50606"
++      help
++        If you say yes here you get support for the Philips PCF50606
++        PMU's RTC.
++
+ config RTC_DRV_M41T80
+       tristate "ST M41T65/M41T80/81/82/83/84/85/87"
+       help
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/rtc/Makefile linux-2.6.29-rc3.owrt.om/drivers/rtc/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/rtc/Makefile 2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/rtc/Makefile      2009-05-10 22:28:00.000000000 +0200
+@@ -76,3 +76,4 @@
+ obj-$(CONFIG_RTC_DRV_WM8350)  += rtc-wm8350.o
+ obj-$(CONFIG_RTC_DRV_X1205)   += rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_PCF50633)        += rtc-pcf50633.o
++obj-$(CONFIG_RTC_DRV_PCF50606)        += rtc-pcf50606.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pcf50606.c linux-2.6.29-rc3.owrt.om/drivers/rtc/rtc-pcf50606.c
+--- linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pcf50606.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/rtc/rtc-pcf50606.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,335 @@
++/* NXP PCF50606 RTC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green and Werner Almesberger
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/err.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++#define PCF50606_REG_RTCSC    0x0a /* Second */
++#define PCF50606_REG_RTCMN    0x0b /* Minute */
++#define PCF50606_REG_RTCHR    0x0c /* Hour */
++#define PCF50606_REG_RTCWD    0x0d /* Weekday */
++#define PCF50606_REG_RTCDT    0x0e /* Day */
++#define PCF50606_REG_RTCMT    0x0f /* Month */
++#define PCF50606_REG_RTCYR    0x10 /* Year */
++#define PCF50606_REG_RTCSCA   0x11 /* Alarm Second */
++#define PCF50606_REG_RTCMNA   0x12 /* Alarm Minute */
++#define PCF50606_REG_RTCHRA   0x13 /* Alarm Hour */
++#define PCF50606_REG_RTCWDA   0x14 /* Alarm Weekday */
++#define PCF50606_REG_RTCDTA   0x15 /* Alarm Day */
++#define PCF50606_REG_RTCMTA   0x16 /* Alarm Month */
++#define PCF50606_REG_RTCYRA   0x17 /* Alarm Year */
++
++enum pcf50606_time_indexes {
++      PCF50606_TI_SEC,
++      PCF50606_TI_MIN,
++      PCF50606_TI_HOUR,
++      PCF50606_TI_WKDAY,
++      PCF50606_TI_DAY,
++      PCF50606_TI_MONTH,
++      PCF50606_TI_YEAR,
++      PCF50606_TI_EXTENT /* always last */
++};
++
++struct pcf50606_time {
++      u_int8_t time[PCF50606_TI_EXTENT];
++};
++
++struct pcf50606_rtc {
++      int alarm_enabled;
++      int second_enabled;
++
++      struct pcf50606 *pcf;
++      struct rtc_device *rtc_dev;
++};
++
++static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50606_time *pcf)
++{
++      rtc->tm_sec = bcd2bin(pcf->time[PCF50606_TI_SEC]);
++      rtc->tm_min = bcd2bin(pcf->time[PCF50606_TI_MIN]);
++      rtc->tm_hour = bcd2bin(pcf->time[PCF50606_TI_HOUR]);
++      rtc->tm_wday = bcd2bin(pcf->time[PCF50606_TI_WKDAY]);
++      rtc->tm_mday = bcd2bin(pcf->time[PCF50606_TI_DAY]);
++      rtc->tm_mon = bcd2bin(pcf->time[PCF50606_TI_MONTH]) - 1;
++      rtc->tm_year = bcd2bin(pcf->time[PCF50606_TI_YEAR]) + 100;
++}
++
++static void rtc2pcf_time(struct pcf50606_time *pcf, struct rtc_time *rtc)
++{
++      pcf->time[PCF50606_TI_SEC] = bin2bcd(rtc->tm_sec);
++      pcf->time[PCF50606_TI_MIN] = bin2bcd(rtc->tm_min);
++      pcf->time[PCF50606_TI_HOUR] = bin2bcd(rtc->tm_hour);
++      pcf->time[PCF50606_TI_WKDAY] = bin2bcd(rtc->tm_wday);
++      pcf->time[PCF50606_TI_DAY] = bin2bcd(rtc->tm_mday);
++      pcf->time[PCF50606_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
++      pcf->time[PCF50606_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
++}
++
++static int
++pcf50606_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
++{
++      struct pcf50606_rtc *rtc = dev_get_drvdata(dev);
++
++      switch (cmd) {
++      case RTC_AIE_OFF:
++              rtc->alarm_enabled = 0;
++              pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++              return 0;
++      case RTC_AIE_ON:
++              rtc->alarm_enabled = 1;
++              pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++              return 0;
++      case RTC_UIE_OFF:
++              rtc->second_enabled = 0;
++              pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_SECOND);
++              return 0;
++      case RTC_UIE_ON:
++              rtc->second_enabled = 1;
++              pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_SECOND);
++              return 0;
++      }
++
++      return -ENOIOCTLCMD;
++}
++
++static int pcf50606_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++      struct pcf50606_rtc *rtc;
++      struct pcf50606_time pcf_tm;
++      int ret;
++
++      rtc = dev_get_drvdata(dev);
++
++      ret = pcf50606_read_block(rtc->pcf, PCF50606_REG_RTCSC,
++                                          PCF50606_TI_EXTENT,
++                                          &pcf_tm.time[0]);
++      if (ret != PCF50606_TI_EXTENT) {
++              dev_err(dev, "Failed to read time\n");
++              return -EIO;
++      }
++
++      dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++              pcf_tm.time[PCF50606_TI_DAY],
++              pcf_tm.time[PCF50606_TI_MONTH],
++              pcf_tm.time[PCF50606_TI_YEAR],
++              pcf_tm.time[PCF50606_TI_HOUR],
++              pcf_tm.time[PCF50606_TI_MIN],
++              pcf_tm.time[PCF50606_TI_SEC]);
++
++      pcf2rtc_time(tm, &pcf_tm);
++
++      dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++              tm->tm_mday, tm->tm_mon, tm->tm_year,
++              tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++      return rtc_valid_tm(tm);
++}
++
++static int pcf50606_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++      struct pcf50606_rtc *rtc;
++      struct pcf50606_time pcf_tm;
++      int second_masked, alarm_masked, ret = 0;
++
++      rtc = dev_get_drvdata(dev);
++
++      dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++              tm->tm_mday, tm->tm_mon, tm->tm_year,
++              tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++      rtc2pcf_time(&pcf_tm, tm);
++
++      dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++              pcf_tm.time[PCF50606_TI_DAY],
++              pcf_tm.time[PCF50606_TI_MONTH],
++              pcf_tm.time[PCF50606_TI_YEAR],
++              pcf_tm.time[PCF50606_TI_HOUR],
++              pcf_tm.time[PCF50606_TI_MIN],
++              pcf_tm.time[PCF50606_TI_SEC]);
++
++
++      second_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_SECOND);
++      alarm_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      if (!second_masked)
++              pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_SECOND);
++      if (!alarm_masked)
++              pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      /* Returns 0 on success */
++      ret = pcf50606_write_block(rtc->pcf, PCF50606_REG_RTCSC,
++                                           PCF50606_TI_EXTENT,
++                                           &pcf_tm.time[0]);
++
++      if (!second_masked)
++              pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_SECOND);
++      if (!alarm_masked)
++              pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      return ret;
++}
++
++static int pcf50606_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++      struct pcf50606_rtc *rtc;
++      struct pcf50606_time pcf_tm;
++      int ret = 0;
++
++      rtc = dev_get_drvdata(dev);
++
++      alrm->enabled = rtc->alarm_enabled;
++
++      ret = pcf50606_read_block(rtc->pcf, PCF50606_REG_RTCSCA,
++                              PCF50606_TI_EXTENT, &pcf_tm.time[0]);
++      if (ret != PCF50606_TI_EXTENT) {
++              dev_err(dev, "Failed to read time\n");
++              return -EIO;
++      }
++
++      pcf2rtc_time(&alrm->time, &pcf_tm);
++
++      return rtc_valid_tm(&alrm->time);
++}
++
++static int pcf50606_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++      struct pcf50606_rtc *rtc;
++      struct pcf50606_time pcf_tm;
++      int alarm_masked, ret = 0;
++
++      rtc = dev_get_drvdata(dev);
++
++      rtc2pcf_time(&pcf_tm, &alrm->time);
++
++      /* do like mktime does and ignore tm_wday */
++      pcf_tm.time[PCF50606_TI_WKDAY] = 7;
++
++      alarm_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      /* disable alarm interrupt */
++      if (!alarm_masked)
++              pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      /* Returns 0 on success */
++      ret = pcf50606_write_block(rtc->pcf, PCF50606_REG_RTCSCA,
++                              PCF50606_TI_EXTENT, &pcf_tm.time[0]);
++
++      if (!alarm_masked)
++              pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++      return ret;
++}
++
++static struct rtc_class_ops pcf50606_rtc_ops = {
++      .ioctl          = pcf50606_rtc_ioctl,
++      .read_time      = pcf50606_rtc_read_time,
++      .set_time       = pcf50606_rtc_set_time,
++      .read_alarm     = pcf50606_rtc_read_alarm,
++      .set_alarm      = pcf50606_rtc_set_alarm,
++};
++
++static void pcf50606_rtc_irq(int irq, void *data)
++{
++      struct pcf50606_rtc *rtc = data;
++
++      switch (irq) {
++      case PCF50606_IRQ_ALARM:
++              rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++              break;
++      case PCF50606_IRQ_SECOND:
++              rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
++              break;
++      }
++}
++
++static int __devinit pcf50606_rtc_probe(struct platform_device *pdev)
++{
++      struct pcf50606_subdev_pdata *pdata;
++      struct pcf50606_rtc *rtc;
++
++      
++      rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
++      if (!rtc)
++              return -ENOMEM;
++
++      pdata = pdev->dev.platform_data;
++      rtc->pcf = pdata->pcf;
++      platform_set_drvdata(pdev, rtc);
++      rtc->rtc_dev = rtc_device_register("pcf50606-rtc", &pdev->dev,
++                              &pcf50606_rtc_ops, THIS_MODULE);
++
++      if (IS_ERR(rtc->rtc_dev)) {
++              kfree(rtc);
++              return PTR_ERR(rtc->rtc_dev);
++      }
++
++      pcf50606_register_irq(rtc->pcf, PCF50606_IRQ_ALARM,
++                                      pcf50606_rtc_irq, rtc);
++      pcf50606_register_irq(rtc->pcf, PCF50606_IRQ_SECOND,
++                                      pcf50606_rtc_irq, rtc);
++
++      return 0;
++}
++
++
++static int __devexit pcf50606_rtc_remove(struct platform_device *pdev)
++{
++      struct pcf50606_rtc *rtc;
++
++      rtc = platform_get_drvdata(pdev);
++      
++      pcf50606_free_irq(rtc->pcf, PCF50606_IRQ_ALARM);
++      pcf50606_free_irq(rtc->pcf, PCF50606_IRQ_SECOND);
++      
++      rtc_device_unregister(rtc->rtc_dev);
++
++      kfree(rtc);
++
++      return 0;
++}
++
++
++static struct platform_driver pcf50606_rtc_driver = {
++      .driver = {
++              .name = "pcf50606-rtc",
++      },
++      .probe = pcf50606_rtc_probe,
++      .remove = __devexit_p(pcf50606_rtc_remove),
++};
++
++static int __init pcf50606_rtc_init(void)
++{
++      return platform_driver_register(&pcf50606_rtc_driver);
++}
++module_init(pcf50606_rtc_init);
++
++static void __exit pcf50606_rtc_exit(void)
++{
++      platform_driver_unregister(&pcf50606_rtc_driver);
++}
++module_exit(pcf50606_rtc_exit);
++
++MODULE_DESCRIPTION("PCF50606 RTC driver");
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_LICENSE("GPL");
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pcf50633.c linux-2.6.29-rc3.owrt.om/drivers/rtc/rtc-pcf50633.c
+--- linux-2.6.29-rc3.owrt/drivers/rtc/rtc-pcf50633.c   2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/rtc/rtc-pcf50633.c        2009-05-10 22:28:00.000000000 +0200
+@@ -58,6 +58,7 @@
+ struct pcf50633_rtc {
+       int alarm_enabled;
+       int second_enabled;
++      int alarm_pending;
+       struct pcf50633 *pcf;
+       struct rtc_device *rtc_dev;
+@@ -70,7 +71,7 @@
+       rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
+       rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
+       rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
+-      rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
++      rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
+       rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
+ }
+@@ -81,7 +82,7 @@
+       pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
+       pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
+       pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
+-      pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
++      pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
+       pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
+ }
+@@ -209,6 +210,7 @@
+       rtc = dev_get_drvdata(dev);
+       alrm->enabled = rtc->alarm_enabled;
++      alrm->pending = rtc->alarm_pending;
+       ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
+                               PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+@@ -244,9 +246,12 @@
+       /* Returns 0 on success */
+       ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+                               PCF50633_TI_EXTENT, &pcf_tm.time[0]);
++      if (!alrm->enabled)
++              rtc->alarm_pending = 0;
+-      if (!alarm_masked)
++      if (!alarm_masked || alrm->enabled)
+               pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
++      rtc->alarm_enabled = alrm->enabled;
+       return ret;
+ }
+@@ -267,6 +272,7 @@
+       switch (irq) {
+       case PCF50633_IRQ_ALARM:
+               rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++              rtc->alarm_pending = 1;
+               break;
+       case PCF50633_IRQ_SECOND:
+               rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/serial/s3c2410.c linux-2.6.29-rc3.owrt.om/drivers/serial/s3c2410.c
+--- linux-2.6.29-rc3.owrt/drivers/serial/s3c2410.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/serial/s3c2410.c  2009-05-10 22:28:00.000000000 +0200
+@@ -19,6 +19,7 @@
+ #include <linux/serial.h>
+ #include <asm/irq.h>
++
+ #include <mach/hardware.h>
+ #include <plat/regs-serial.h>
+@@ -85,6 +86,7 @@
+ static int s3c2410_serial_probe(struct platform_device *dev)
+ {
++      dbg("s3c2410_serial_probe: dev=%p\n", dev);
+       return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/serial/s3c6400.c linux-2.6.29-rc3.owrt.om/drivers/serial/s3c6400.c
+--- linux-2.6.29-rc3.owrt/drivers/serial/s3c6400.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/serial/s3c6400.c  2009-05-10 22:28:00.000000000 +0200
+@@ -102,6 +102,7 @@
+       .name           = "Samsung S3C6400 UART",
+       .type           = PORT_S3C6400,
+       .fifosize       = 64,
++      .has_divslot    = 1,
+       .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
+       .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
+       .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/serial/samsung.c linux-2.6.29-rc3.owrt.om/drivers/serial/samsung.c
+--- linux-2.6.29-rc3.owrt/drivers/serial/samsung.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/serial/samsung.c  2009-05-10 22:28:00.000000000 +0200
+@@ -50,6 +50,10 @@
+ #include <mach/map.h>
+ #include <plat/regs-serial.h>
++#if defined(CONFIG_MACH_NEO1973) && !defined(CONFIG_CPU_S3C6410)
++#include <mach/regs-gpio.h>
++#include <mach/regs-clock.h>
++#endif
+ #include "samsung.h"
+@@ -235,8 +239,8 @@
+               port->icount.rx++;
+               if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
+-                      dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
+-                          ch, uerstat);
++                      printk(KERN_DEBUG "rxerr: port=%d ch=0x%02x, rxs=0x%08x\n",
++                          port->line, ch, uerstat);
+                       /* check for break */
+                       if (uerstat & S3C2410_UERSTAT_BREAK) {
+@@ -265,8 +269,8 @@
+               if (uart_handle_sysrq_char(port, ch))
+                       goto ignore_char;
+-              uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
+-                               ch, flag);
++              if ((uerstat & port->ignore_status_mask & ~S3C2410_UERSTAT_OVERRUN) == 0)
++                      tty_insert_flip_char(tty, ch, flag);
+  ignore_char:
+               continue;
+@@ -508,6 +512,7 @@
+ struct baud_calc {
+       struct s3c24xx_uart_clksrc      *clksrc;
+       unsigned int                     calc;
++      unsigned int                     divslot;
+       unsigned int                     quot;
+       struct clk                      *src;
+ };
+@@ -517,6 +522,7 @@
+                                  struct s3c24xx_uart_clksrc *clksrc,
+                                  unsigned int baud)
+ {
++      struct s3c24xx_uart_port *ourport = to_ourport(port);
+       unsigned long rate;
+       calc->src = clk_get(port->dev, clksrc->name);
+@@ -527,8 +533,24 @@
+       rate /= clksrc->divisor;
+       calc->clksrc = clksrc;
+-      calc->quot = (rate + (8 * baud)) / (16 * baud);
+-      calc->calc = (rate / (calc->quot * 16));
++
++      if (ourport->info->has_divslot) {
++              unsigned long div = rate / baud;
++
++              /* The UDIVSLOT register on the newer UARTs allows us to
++               * get a divisor adjustment of 1/16th on the baud clock.
++               *
++               * We don't keep the UDIVSLOT value (the 16ths we calculated
++               * by not multiplying the baud by 16) as it is easy enough
++               * to recalculate.
++               */
++
++              calc->quot = div / 16;
++              calc->calc = rate / div;
++      } else {
++              calc->quot = (rate + (8 * baud)) / (16 * baud);
++              calc->calc = (rate / (calc->quot * 16));
++      }
+       calc->quot--;
+       return 1;
+@@ -611,6 +633,30 @@
+       return best->quot;
+ }
++/* udivslot_table[]
++ *
++ * This table takes the fractional value of the baud divisor and gives
++ * the recommended setting for the UDIVSLOT register.
++ */
++static u16 udivslot_table[16] = {
++      [0] = 0x0000,
++      [1] = 0x0080,
++      [2] = 0x0808,
++      [3] = 0x0888,
++      [4] = 0x2222,
++      [5] = 0x4924,
++      [6] = 0x4A52,
++      [7] = 0x54AA,
++      [8] = 0x5555,
++      [9] = 0xD555,
++      [10] = 0xD5D5,
++      [11] = 0xDDD5,
++      [12] = 0xDDDD,
++      [13] = 0xDFDD,
++      [14] = 0xDFDF,
++      [15] = 0xFFDF,
++};
++
+ static void s3c24xx_serial_set_termios(struct uart_port *port,
+                                      struct ktermios *termios,
+                                      struct ktermios *old)
+@@ -623,6 +669,7 @@
+       unsigned int baud, quot;
+       unsigned int ulcon;
+       unsigned int umcon;
++      unsigned int udivslot = 0;
+       /*
+        * We don't support modem control lines.
+@@ -644,6 +691,7 @@
+       /* check to see if we need  to change clock source */
+       if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
++              dbg("selecting clock %p\n", clk);
+               s3c24xx_serial_setsource(port, clksrc);
+               if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+@@ -658,6 +706,13 @@
+               ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
+       }
++      if (ourport->info->has_divslot) {
++              unsigned int div = ourport->baudclk_rate / baud;
++
++              udivslot = udivslot_table[div & 15];
++              dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
++      }
++
+       switch (termios->c_cflag & CSIZE) {
+       case CS5:
+               dbg("config: 5bits/char\n");
+@@ -697,12 +752,16 @@
+       spin_lock_irqsave(&port->lock, flags);
+-      dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
++      dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
++          ulcon, quot, udivslot);
+       wr_regl(port, S3C2410_ULCON, ulcon);
+       wr_regl(port, S3C2410_UBRDIV, quot);
+       wr_regl(port, S3C2410_UMCON, umcon);
++      if (ourport->info->has_divslot)
++              wr_regl(port, S3C2443_DIVSLOT, udivslot);
++
+       dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+           rd_regl(port, S3C2410_ULCON),
+           rd_regl(port, S3C2410_UCON),
+@@ -887,6 +946,70 @@
+ #endif
+ };
++#ifdef CONFIG_MACH_NEO1973_GTA02
++static void s3c24xx_serial_force_debug_port_up(void)
++{
++      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
++                                                       CONFIG_DEBUG_S3C_UART];
++      struct s3c24xx_uart_clksrc *clksrc = NULL;
++      struct clk *clk = NULL;
++      unsigned long tmp;
++
++      s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
++
++      tmp = __raw_readl(S3C2410_CLKCON);
++
++      /* re-start uart clocks */
++      tmp |= S3C2410_CLKCON_UART0;
++      tmp |= S3C2410_CLKCON_UART1;
++      tmp |= S3C2410_CLKCON_UART2;
++
++      __raw_writel(tmp, S3C2410_CLKCON);
++      udelay(10);
++
++      s3c24xx_serial_setsource(&ourport->port, clksrc);
++
++      if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
++              clk_disable(ourport->baudclk);
++              ourport->baudclk  = NULL;
++      }
++
++      clk_enable(clk);
++
++      ourport->clksrc = clksrc;
++      ourport->baudclk = clk;
++}
++
++static void s3c2410_printascii(const char *sz)
++{
++      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
++                                                       CONFIG_DEBUG_S3C_UART];
++      struct uart_port *port = &ourport->port;
++
++      /* 8 N 1 */
++      wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
++      /* polling mode */
++      wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
++      /* disable FIFO */
++      wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
++      /* fix baud rate */
++      wr_regl(port, S3C2410_UBRDIV, 26);
++
++      while (*sz) {
++              int timeout = 10000000;
++
++              /* spin on it being busy */
++              while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
++                      ;
++
++              /* transmit register */
++              wr_regl(port, S3C2410_UTXH, *sz);
++
++              sz++;
++      }
++}
++#endif
++
+ /* s3c24xx_serial_resetport
+  *
+  * wrapper to call the specific reset for this port (reset the fifos
+@@ -937,13 +1060,17 @@
+               struct ktermios *termios;
+               struct tty_struct *tty;
+-              if (uport->info == NULL)
++              if (uport->info == NULL) {
++                      printk(KERN_WARNING "%s: info NULL\n", __func__);
+                       goto exit;
++              }
+               tty = uport->info->port.tty;
+-              if (tty == NULL)
++              if (tty == NULL) {
++                      printk(KERN_WARNING "%s: tty is NULL\n", __func__);
+                       goto exit;
++              }
+               termios = tty->termios;
+@@ -1092,6 +1219,7 @@
+       ourport = &s3c24xx_serial_ports[probe_index];
+       probe_index++;
++      init_resume_dependency_list(&ourport->resume_dependency);
+       dbg("%s: initialising port %p...\n", __func__, ourport);
+@@ -1148,6 +1276,16 @@
+       return 0;
+ }
++void s3c24xx_serial_register_resume_dependency(struct resume_dependency *
++                                            resume_dependency, int uart_index)
++{
++      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[uart_index];
++
++      register_resume_dependency(&ourport->resume_dependency,
++                                                           resume_dependency);
++}
++EXPORT_SYMBOL(s3c24xx_serial_register_resume_dependency);
++
+ static int s3c24xx_serial_resume(struct platform_device *dev)
+ {
+       struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+@@ -1159,6 +1297,9 @@
+               clk_disable(ourport->clk);
+               uart_resume_port(&s3c24xx_uart_drv, port);
++
++              callback_all_resume_dependencies(&ourport->resume_dependency);
++
+       }
+       return 0;
+@@ -1169,6 +1310,12 @@
+                       struct s3c24xx_uart_info *info)
+ {
+       dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
++#ifdef CONFIG_MACH_NEO1973_GTA02
++      /* set up the emergency debug UART functions */
++
++      printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up;
++      printk_emergency_debug_spew_send_string = s3c2410_printascii;
++#endif
+ #ifdef CONFIG_PM
+       drv->suspend = s3c24xx_serial_suspend;
+@@ -1208,6 +1355,13 @@
+ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+ static struct uart_port *cons_uart;
++static int cons_silenced;
++
++void s3c24xx_serial_console_set_silence(int silenced)
++{
++      cons_silenced = silenced;
++}
++EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
+ static int
+ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+@@ -1232,9 +1386,21 @@
+ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
+ {
+       unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
++      unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
++
++      if (cons_silenced)
++              return;
++
++      /* If auto HW flow control enabled, temporarily turn it off */
++      if (umcon & S3C2410_UMCOM_AFC)
++              wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
++
+       while (!s3c24xx_serial_console_txrdy(port, ufcon))
+               barrier();
+       wr_regb(cons_uart, S3C2410_UTXH, ch);
++
++      if (umcon & S3C2410_UMCOM_AFC)
++              wr_regl(port, S3C2410_UMCON, umcon);
+ }
+ static void
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/serial/samsung.h linux-2.6.29-rc3.owrt.om/drivers/serial/samsung.h
+--- linux-2.6.29-rc3.owrt/drivers/serial/samsung.h     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/serial/samsung.h  2009-05-10 22:28:00.000000000 +0200
+@@ -10,6 +10,8 @@
+  * published by the Free Software Foundation.
+ */
++#include <linux/resume-dependency.h>
++
+ struct s3c24xx_uart_info {
+       char                    *name;
+       unsigned int            type;
+@@ -21,6 +23,10 @@
+       unsigned long           tx_fifoshift;
+       unsigned long           tx_fifofull;
++      /* uart port features */
++
++      unsigned int            has_divslot:1;
++
+       /* clock source control */
+       int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+@@ -48,6 +54,8 @@
+ #ifdef CONFIG_CPU_FREQ
+       struct notifier_block           freq_transition;
+ #endif
++
++      struct resume_dependency        resume_dependency;
+ };
+ /* conversion functions */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/spi/Kconfig linux-2.6.29-rc3.owrt.om/drivers/spi/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/spi/Kconfig  2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/spi/Kconfig       2009-05-10 22:28:00.000000000 +0200
+@@ -257,6 +257,15 @@
+         sysfs interface, with each line presented as a kind of GPIO
+         exposing both switch control and diagnostic feedback.
++config SPI_S3C64XX_GPIO
++      tristate "Samsung S3C64XX series SPI by GPIO"
++      depends on ARCH_S3C64XX && EXPERIMENTAL
++      select SPI_BITBANG
++      help
++        SPI driver for Samsung S3C64XX series ARM SoCs using
++        GPIO lines to provide the SPI bus. This can be used where
++        the inbuilt hardware cannot provide the transfer mode, or
++        where the board is using non hardware connected pins.
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/spi/Makefile linux-2.6.29-rc3.owrt.om/drivers/spi/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/spi/Makefile 2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/spi/Makefile      2009-05-10 22:28:00.000000000 +0200
+@@ -31,6 +31,7 @@
+ obj-$(CONFIG_SPI_TXX9)                        += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX)              += xilinx_spi.o
+ obj-$(CONFIG_SPI_SH_SCI)              += spi_sh_sci.o
++obj-$(CONFIG_SPI_S3C64XX_GPIO)                += spi_s3c64xx_gpio.o
+ #     ... add above this line ...
+ # SPI protocol drivers (device/link on bus)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/spi/spi_bitbang.c linux-2.6.29-rc3.owrt.om/drivers/spi/spi_bitbang.c
+--- linux-2.6.29-rc3.owrt/drivers/spi/spi_bitbang.c    2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/spi/spi_bitbang.c 2009-05-10 22:28:00.000000000 +0200
+@@ -264,6 +264,123 @@
+  * Drivers can provide word-at-a-time i/o primitives, or provide
+  * transfer-at-a-time ones to leverage dma or fifo hardware.
+  */
++
++/* Synchronous non blocking transfer */ 
++int
++spi_bitbang_transfer_sync(struct spi_device *spi, struct spi_message *m)
++{
++      struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
++      struct spi_transfer *t;
++      unsigned long flags;
++      int cs_change = 1;
++      int status;
++      int nsecs;
++      int (*setup_transfer)(struct spi_device *, struct spi_transfer *);
++
++      /* FIXME this is made-up ... the correct value is known to
++       * word-at-a-time bitbang code, and presumably chipselect()
++       * should enforce these requirements too?
++       */
++      nsecs = 100;
++      cs_change = 1;
++      status = 0;
++      setup_transfer = NULL;
++
++      local_irq_save(flags);
++      list_for_each_entry (t, &m->transfers, transfer_list) {
++              /* override or restore speed and wordsize */
++              if (t->speed_hz || t->bits_per_word) {
++                      setup_transfer = bitbang->setup_transfer;
++                      if (!setup_transfer) {
++                              status = -ENOPROTOOPT;
++                              break;
++                      }
++              }
++              if (setup_transfer) {
++                      status = setup_transfer(spi, t);
++                      if (status < 0)
++                              break;
++              }
++              
++              /* set up default clock polarity, and activate chip;
++               * this implicitly updates clock and spi modes as
++               * previously recorded for this device via setup().
++               * (and also deselects any other chip that might be
++               * selected ...)
++               */
++              
++              if (cs_change) {
++                      bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
++                      ndelay(nsecs);
++              }
++
++              cs_change = t->cs_change;
++              if (!t->tx_buf && !t->rx_buf && t->len) {
++                      status = -EINVAL;
++                      break;
++              }
++              
++              /* transfer data.  the lower level code handles any
++               * new dma mappings it needs. our caller always gave
++               * us dma-safe buffers.
++               */
++              if (t->len) {
++                      /* REVISIT dma API still needs a designated
++                       * DMA_ADDR_INVALID; ~0 might be better.
++                       */
++                      if (!m->is_dma_mapped)
++                              t->rx_dma = t->tx_dma = 0;
++                      status = bitbang->txrx_bufs(spi, t);
++              }
++
++              if (status > 0)
++                      m->actual_length += status;
++              if (status != t->len) {
++                      /* always report some kind of error */
++                      if (status >= 0)
++                              status = -EREMOTEIO;
++                      break;
++              }
++              status = 0;
++                      /* protocol tweaks before next transfer */
++              if (t->delay_usecs)
++                      udelay(t->delay_usecs);
++                      if (!cs_change)
++                      continue;
++              if (t->transfer_list.next == &m->transfers)
++                      break;
++                      /* sometimes a short mid-message deselect of the chip
++               * may be needed to terminate a mode or command
++               */
++              ndelay(nsecs);
++              bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++              ndelay(nsecs);
++      }
++      
++      m->status = status;
++      if (m->complete)
++              m->complete(m->context);
++
++      /* restore speed and wordsize */
++      if (setup_transfer)
++              setup_transfer(spi, NULL);
++
++      /* normally deactivate chipselect ... unless no error and
++       * cs_change has hinted that the next message will probably
++       * be for this chip too.
++       */
++      if (!(status == 0 && cs_change)) {
++              ndelay(nsecs);
++              bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++              ndelay(nsecs);
++      }
++
++      local_irq_restore(flags);
++
++      return status;
++}
++EXPORT_SYMBOL_GPL(spi_bitbang_transfer_sync);
++
+ static void bitbang_work(struct work_struct *work)
+ {
+       struct spi_bitbang      *bitbang =
+@@ -274,120 +391,13 @@
+       bitbang->busy = 1;
+       while (!list_empty(&bitbang->queue)) {
+               struct spi_message      *m;
+-              struct spi_device       *spi;
+-              unsigned                nsecs;
+-              struct spi_transfer     *t = NULL;
+-              unsigned                tmp;
+-              unsigned                cs_change;
+-              int                     status;
+-              int                     (*setup_transfer)(struct spi_device *,
+-                                              struct spi_transfer *);
+               m = container_of(bitbang->queue.next, struct spi_message,
+                               queue);
+               list_del_init(&m->queue);
+-              spin_unlock_irqrestore(&bitbang->lock, flags);
+-
+-              /* FIXME this is made-up ... the correct value is known to
+-               * word-at-a-time bitbang code, and presumably chipselect()
+-               * should enforce these requirements too?
+-               */
+-              nsecs = 100;
+-
+-              spi = m->spi;
+-              tmp = 0;
+-              cs_change = 1;
+-              status = 0;
+-              setup_transfer = NULL;
+-
+-              list_for_each_entry (t, &m->transfers, transfer_list) {
+-
+-                      /* override or restore speed and wordsize */
+-                      if (t->speed_hz || t->bits_per_word) {
+-                              setup_transfer = bitbang->setup_transfer;
+-                              if (!setup_transfer) {
+-                                      status = -ENOPROTOOPT;
+-                                      break;
+-                              }
+-                      }
+-                      if (setup_transfer) {
+-                              status = setup_transfer(spi, t);
+-                              if (status < 0)
+-                                      break;
+-                      }
+-
+-                      /* set up default clock polarity, and activate chip;
+-                       * this implicitly updates clock and spi modes as
+-                       * previously recorded for this device via setup().
+-                       * (and also deselects any other chip that might be
+-                       * selected ...)
+-                       */
+-                      if (cs_change) {
+-                              bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+-                              ndelay(nsecs);
+-                      }
+-                      cs_change = t->cs_change;
+-                      if (!t->tx_buf && !t->rx_buf && t->len) {
+-                              status = -EINVAL;
+-                              break;
+-                      }
+-
+-                      /* transfer data.  the lower level code handles any
+-                       * new dma mappings it needs. our caller always gave
+-                       * us dma-safe buffers.
+-                       */
+-                      if (t->len) {
+-                              /* REVISIT dma API still needs a designated
+-                               * DMA_ADDR_INVALID; ~0 might be better.
+-                               */
+-                              if (!m->is_dma_mapped)
+-                                      t->rx_dma = t->tx_dma = 0;
+-                              status = bitbang->txrx_bufs(spi, t);
+-                      }
+-                      if (status > 0)
+-                              m->actual_length += status;
+-                      if (status != t->len) {
+-                              /* always report some kind of error */
+-                              if (status >= 0)
+-                                      status = -EREMOTEIO;
+-                              break;
+-                      }
+-                      status = 0;
+-
+-                      /* protocol tweaks before next transfer */
+-                      if (t->delay_usecs)
+-                              udelay(t->delay_usecs);
+-
+-                      if (!cs_change)
+-                              continue;
+-                      if (t->transfer_list.next == &m->transfers)
+-                              break;
+-
+-                      /* sometimes a short mid-message deselect of the chip
+-                       * may be needed to terminate a mode or command
+-                       */
+-                      ndelay(nsecs);
+-                      bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+-                      ndelay(nsecs);
+-              }
+-
+-              m->status = status;
+-              m->complete(m->context);
+-
+-              /* restore speed and wordsize */
+-              if (setup_transfer)
+-                      setup_transfer(spi, NULL);
+-
+-              /* normally deactivate chipselect ... unless no error and
+-               * cs_change has hinted that the next message will probably
+-               * be for this chip too.
+-               */
+-              if (!(status == 0 && cs_change)) {
+-                      ndelay(nsecs);
+-                      bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+-                      ndelay(nsecs);
+-              }
++              spin_unlock_irqrestore(&bitbang->lock, flags);
++              spi_bitbang_transfer_sync(m->spi, m);
+               spin_lock_irqsave(&bitbang->lock, flags);
+       }
+       bitbang->busy = 0;
+@@ -459,6 +469,9 @@
+       if (!bitbang->master->transfer)
+               bitbang->master->transfer = spi_bitbang_transfer;
++      if (!bitbang->master->transfer_sync && bitbang->non_blocking_transfer)
++              bitbang->master->transfer_sync = spi_bitbang_transfer_sync;
++
+       if (!bitbang->txrx_bufs) {
+               bitbang->use_dma = 0;
+               bitbang->txrx_bufs = spi_bitbang_bufs;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/spi/spi_s3c24xx_gpio.c linux-2.6.29-rc3.owrt.om/drivers/spi/spi_s3c24xx_gpio.c
+--- linux-2.6.29-rc3.owrt/drivers/spi/spi_s3c24xx_gpio.c       2009-05-10 22:04:49.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/spi/spi_s3c24xx_gpio.c    2009-05-10 22:28:00.000000000 +0200
+@@ -91,7 +91,7 @@
+       struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+       if (sg->info && sg->info->chip_select)
+-              (sg->info->chip_select)(sg->info, value);
++              (sg->info->chip_select)(sg->info, dev->chip_select, value);
+ }
+ static int s3c2410_spigpio_probe(struct platform_device *dev)
+@@ -112,14 +112,17 @@
+       platform_set_drvdata(dev, sp);
+-      /* copy in the plkatform data */
++      /* copy in the platform data */
+       info = sp->info = dev->dev.platform_data;
++      master->num_chipselect = info->num_chipselect;
++
+       /* setup spi bitbang adaptor */
+       sp->bitbang.master = spi_master_get(master);
+       sp->bitbang.master->bus_num = info->bus_num;
+       sp->bitbang.master->num_chipselect = info->num_chipselect;
+       sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
++      sp->bitbang.non_blocking_transfer = info->non_blocking_transfer;
+       sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+       sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/spi/spi_s3c64xx_gpio.c linux-2.6.29-rc3.owrt.om/drivers/spi/spi_s3c64xx_gpio.c
+--- linux-2.6.29-rc3.owrt/drivers/spi/spi_s3c64xx_gpio.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/spi/spi_s3c64xx_gpio.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,187 @@
++/* linux/drivers/spi/spi_s3c64xx_gpio.c
++ *
++ * Copyright (c) 2009 Openmoko Inc.
++ * Author: Matt Hsu <matt_hsu@openmoko.org>
++ *
++ * S3C64XX GPIO-SPI driver.
++ * This driver is based on spi_s3c24xx_gpio.c
++ *
++ * Copyright (c) 2006 Ben Dooks
++ * Copyright (c) 2006 Simtec Electronics
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <plat/gpio-cfg.h>
++#include <mach/spi-gpio.h>
++
++struct s3c64xx_spigpio {
++      struct spi_bitbang              bitbang;
++      struct s3c64xx_spigpio_info     *info;
++      struct platform_device          *dev;
++};
++
++static inline struct s3c64xx_spigpio *spidev_to_sg(struct spi_device *spi)
++{
++      return dev_get_drvdata(&spi->master->dev);
++}
++
++static inline void setsck(struct spi_device *dev, int on)
++{
++      struct s3c64xx_spigpio *sg = spidev_to_sg(dev);
++      gpio_direction_output(sg->info->pin_clk, on ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int on)
++{
++      struct s3c64xx_spigpio *sg = spidev_to_sg(dev);
++      gpio_direction_output(sg->info->pin_mosi, on ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++      struct s3c64xx_spigpio *sg = spidev_to_sg(dev);
++      return gpio_direction_input(sg->info->pin_miso) ? 1 : 0;
++}
++
++#define spidelay(x) ndelay(x)
++
++#define       EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 s3c64xx_spigpio_txrx_mode0(struct spi_device *spi,
++                                    unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 s3c64xx_spigpio_txrx_mode1(struct spi_device *spi,
++                                    unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 s3c64xx_spigpio_txrx_mode2(struct spi_device *spi,
++                                    unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 s3c64xx_spigpio_txrx_mode3(struct spi_device *spi,
++                                    unsigned nsecs, u32 word, u8 bits)
++{
++      return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++static void s3c64xx_spigpio_chipselect(struct spi_device *dev, int value)
++{
++      struct s3c64xx_spigpio *sg = spidev_to_sg(dev);
++
++      if (sg && sg->info && sg->info->chip_select)
++              (sg->info->chip_select)(sg->info, dev->chip_select, value);
++}
++
++static int s3c64xx_spigpio_probe(struct platform_device *dev)
++{
++      struct s3c64xx_spigpio_info *info;
++      struct spi_master       *master;
++      struct s3c64xx_spigpio  *spi;
++
++      int ret;
++
++      master = spi_alloc_master(&dev->dev, sizeof(struct s3c64xx_spigpio));
++      if (master == NULL) {
++              dev_err(&dev->dev, "failed to allocate spi master\n");
++              ret = -ENOMEM;
++              goto err;
++      }
++
++      spi = spi_master_get_devdata(master);
++
++      /* copy in the platform data */
++      info = spi->info = dev->dev.platform_data;
++
++      master->num_chipselect = info->num_chipselect;
++
++      /* setup spi bitbang adaptor */
++      spi->bitbang.master = spi_master_get(master);
++      spi->bitbang.master->bus_num = info->bus_num;
++
++      spi->bitbang.chipselect = s3c64xx_spigpio_chipselect;
++
++      spi->bitbang.txrx_word[SPI_MODE_0] = s3c64xx_spigpio_txrx_mode0;
++      spi->bitbang.txrx_word[SPI_MODE_1] = s3c64xx_spigpio_txrx_mode1;
++      spi->bitbang.txrx_word[SPI_MODE_2] = s3c64xx_spigpio_txrx_mode2;
++      spi->bitbang.txrx_word[SPI_MODE_3] = s3c64xx_spigpio_txrx_mode3;
++
++      /* set state of spi pins. */
++      gpio_direction_output(info->pin_clk, 0);
++      s3c_gpio_cfgpin(info->pin_clk, S3C_GPIO_OUTPUT);
++
++      dev_set_drvdata(&master->dev, spi);
++
++      ret = spi_bitbang_start(&spi->bitbang);
++      if (ret)
++              goto err_no_bitbang;
++
++      return 0;
++
++ err_no_bitbang:
++      spi_master_put(spi->bitbang.master);
++ err:
++      return ret;
++}
++
++static int s3c64xx_spigpio_remove(struct platform_device *dev)
++{
++      struct s3c64xx_spigpio *sp = platform_get_drvdata(dev);
++
++      spi_bitbang_stop(&sp->bitbang);
++      spi_master_put(sp->bitbang.master);
++
++      return 0;
++}
++
++#define s3c64xx_spigpio_suspend NULL
++#define s3c64xx_spigpio_resume NULL
++
++static struct platform_driver s3c64xx_spigpio_drv = {
++      .probe          = s3c64xx_spigpio_probe,
++      .remove         = s3c64xx_spigpio_remove,
++      .suspend        = s3c64xx_spigpio_suspend,
++      .resume         = s3c64xx_spigpio_resume,
++      .driver         = {
++              .name   = "spi_s3c64xx_gpio",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init s3c64xx_spigpio_init(void)
++{
++      return platform_driver_register(&s3c64xx_spigpio_drv);
++}
++
++static void __exit s3c64xx_spigpio_exit(void)
++{
++      platform_driver_unregister(&s3c64xx_spigpio_drv);
++}
++
++module_init(s3c64xx_spigpio_init);
++module_exit(s3c64xx_spigpio_exit);
++
++MODULE_DESCRIPTION("S3C64XX GPIO-SPI Driver");
++MODULE_AUTHOR("Matt Hsu, <matt_hsu@openmoko.org>");
++MODULE_LICENSE("GPLv2");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/alarm.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/alarm.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/alarm.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/alarm.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,567 @@
++/* drivers/rtc/alarm.c
++ *
++ * Copyright (C) 2007 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <asm/mach/time.h>
++#include <linux/android_alarm.h>
++#include <linux/device.h>
++#include <linux/miscdevice.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/spinlock.h>
++#include <linux/sysdev.h>
++#include <linux/wakelock.h>
++
++#define ANDROID_ALARM_PRINT_ERRORS (1U << 0)
++#define ANDROID_ALARM_PRINT_INIT_STATUS (1U << 1)
++#define ANDROID_ALARM_PRINT_INFO (1U << 2)
++#define ANDROID_ALARM_PRINT_IO (1U << 3)
++#define ANDROID_ALARM_PRINT_INT (1U << 4)
++#define ANDROID_ALARM_PRINT_FLOW (1U << 5)
++
++#if 0
++#define ANDROID_ALARM_DPRINTF_MASK (~0)
++#define ANDROID_ALARM_DPRINTF(debug_level_mask, args...) \
++      do { \
++              if (ANDROID_ALARM_DPRINTF_MASK & debug_level_mask) { \
++                      printk(args); \
++              } \
++      } while (0)
++#else
++#define ANDROID_ALARM_DPRINTF(args...)
++#endif
++
++#define ANDROID_ALARM_WAKEUP_MASK ( \
++      ANDROID_ALARM_RTC_WAKEUP_MASK | \
++      ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
++
++/* support old usespace code */
++#define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
++#define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
++
++static struct rtc_device *alarm_rtc_dev;
++static int alarm_opened;
++static DEFINE_SPINLOCK(alarm_slock);
++static DEFINE_MUTEX(alarm_setrtc_mutex);
++static struct wake_lock alarm_wake_lock;
++static struct wake_lock alarm_rtc_wake_lock;
++static DECLARE_WAIT_QUEUE_HEAD(alarm_wait_queue);
++static uint32_t alarm_pending;
++static uint32_t alarm_enabled;
++static uint32_t wait_pending;
++static struct platform_device *alarm_platform_dev;
++static struct hrtimer alarm_timer[ANDROID_ALARM_TYPE_COUNT];
++static struct timespec alarm_time[ANDROID_ALARM_TYPE_COUNT];
++static struct timespec elapsed_rtc_delta;
++
++static void alarm_start_hrtimer(enum android_alarm_type alarm_type)
++{
++      struct timespec hr_alarm_time;
++      if (!(alarm_enabled & (1U << alarm_type)))
++              return;
++      hr_alarm_time = alarm_time[alarm_type];
++      if (alarm_type == ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP ||
++          alarm_type == ANDROID_ALARM_ELAPSED_REALTIME)
++              set_normalized_timespec(&hr_alarm_time,
++                      hr_alarm_time.tv_sec + elapsed_rtc_delta.tv_sec,
++                      hr_alarm_time.tv_nsec + elapsed_rtc_delta.tv_nsec);
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_FLOW,
++              "alarm start hrtimer %d at %ld.%09ld\n",
++              alarm_type, hr_alarm_time.tv_sec, hr_alarm_time.tv_nsec);
++      hrtimer_start(&alarm_timer[alarm_type],
++                    timespec_to_ktime(hr_alarm_time), HRTIMER_MODE_ABS);
++}
++
++static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++      int rv = 0;
++      unsigned long flags;
++      int i;
++      struct timespec new_alarm_time;
++      struct timespec new_rtc_time;
++      struct timespec tmp_time;
++      struct rtc_time rtc_new_rtc_time;
++      enum android_alarm_type alarm_type = ANDROID_ALARM_IOCTL_TO_TYPE(cmd);
++      uint32_t alarm_type_mask = 1U << alarm_type;
++
++      if (alarm_type >= ANDROID_ALARM_TYPE_COUNT)
++              return -EINVAL;
++
++      if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_GET_TIME(0)) {
++              if ((file->f_flags & O_ACCMODE) == O_RDONLY)
++                      return -EPERM;
++              if (file->private_data == NULL &&
++                  cmd != ANDROID_ALARM_SET_RTC) {
++                      spin_lock_irqsave(&alarm_slock, flags);
++                      if (alarm_opened) {
++                              spin_unlock_irqrestore(&alarm_slock, flags);
++                              return -EBUSY;
++                      }
++                      alarm_opened = 1;
++                      file->private_data = (void *)1;
++                      spin_unlock_irqrestore(&alarm_slock, flags);
++              }
++      }
++
++      switch (ANDROID_ALARM_BASE_CMD(cmd)) {
++      case ANDROID_ALARM_CLEAR(0):
++              spin_lock_irqsave(&alarm_slock, flags);
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_IO,
++                                    "alarm %d clear\n", alarm_type);
++              hrtimer_try_to_cancel(&alarm_timer[alarm_type]);
++              if (alarm_pending) {
++                      alarm_pending &= ~alarm_type_mask;
++                      if (!alarm_pending && !wait_pending)
++                              wake_unlock(&alarm_wake_lock);
++              }
++              alarm_enabled &= ~alarm_type_mask;
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              break;
++
++      case ANDROID_ALARM_SET_OLD:
++      case ANDROID_ALARM_SET_AND_WAIT_OLD:
++              if (get_user(new_alarm_time.tv_sec, (int __user *)arg)) {
++                      rv = -EFAULT;
++                      goto err1;
++              }
++              new_alarm_time.tv_nsec = 0;
++              goto from_old_alarm_set;
++
++      case ANDROID_ALARM_SET_AND_WAIT(0):
++      case ANDROID_ALARM_SET(0):
++              if (copy_from_user(&new_alarm_time, (void __user *)arg,
++                  sizeof(new_alarm_time))) {
++                      rv = -EFAULT;
++                      goto err1;
++              }
++from_old_alarm_set:
++              spin_lock_irqsave(&alarm_slock, flags);
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_IO,
++                      "alarm %d set %ld.%09ld\n", alarm_type,
++                      new_alarm_time.tv_sec, new_alarm_time.tv_nsec);
++              alarm_time[alarm_type] = new_alarm_time;
++              alarm_enabled |= alarm_type_mask;
++              alarm_start_hrtimer(alarm_type);
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_SET_AND_WAIT(0)
++                  && cmd != ANDROID_ALARM_SET_AND_WAIT_OLD)
++                      break;
++              /* fall though */
++      case ANDROID_ALARM_WAIT:
++              spin_lock_irqsave(&alarm_slock, flags);
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_IO, "alarm wait\n");
++              if (!alarm_pending && wait_pending) {
++                      wake_unlock(&alarm_wake_lock);
++                      wait_pending = 0;
++              }
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              rv = wait_event_interruptible(alarm_wait_queue, alarm_pending);
++              if (rv)
++                      goto err1;
++              spin_lock_irqsave(&alarm_slock, flags);
++              rv = alarm_pending;
++              wait_pending = 1;
++              alarm_pending = 0;
++              if (rv & ANDROID_ALARM_WAKEUP_MASK)
++                      wake_unlock(&alarm_rtc_wake_lock);
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              break;
++      case ANDROID_ALARM_SET_RTC:
++              if (copy_from_user(&new_rtc_time, (void __user *)arg,
++                  sizeof(new_rtc_time))) {
++                      rv = -EFAULT;
++                      goto err1;
++              }
++              rtc_time_to_tm(new_rtc_time.tv_sec, &rtc_new_rtc_time);
++
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_IO,
++                      "set rtc %ld %ld - rtc %02d:%02d:%02d %02d/%02d/%04d\n",
++                      new_rtc_time.tv_sec, new_rtc_time.tv_nsec,
++                      rtc_new_rtc_time.tm_hour, rtc_new_rtc_time.tm_min,
++                      rtc_new_rtc_time.tm_sec, rtc_new_rtc_time.tm_mon + 1,
++                      rtc_new_rtc_time.tm_mday,
++                      rtc_new_rtc_time.tm_year + 1900);
++
++              mutex_lock(&alarm_setrtc_mutex);
++              spin_lock_irqsave(&alarm_slock, flags);
++              for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++)
++                      hrtimer_try_to_cancel(&alarm_timer[i]);
++              getnstimeofday(&tmp_time);
++              elapsed_rtc_delta = timespec_sub(elapsed_rtc_delta,
++                                      timespec_sub(tmp_time, new_rtc_time));
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              rv = do_settimeofday(&new_rtc_time);
++              spin_lock_irqsave(&alarm_slock, flags);
++              for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++)
++                      alarm_start_hrtimer(i);
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              if (rv < 0) {
++                      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_ERRORS,
++                                            "Failed to set time\n");
++                      mutex_unlock(&alarm_setrtc_mutex);
++                      goto err1;
++              }
++              rv = rtc_set_time(alarm_rtc_dev, &rtc_new_rtc_time);
++              spin_lock_irqsave(&alarm_slock, flags);
++              alarm_pending |= ANDROID_ALARM_TIME_CHANGE_MASK;
++              wake_up(&alarm_wait_queue);
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              mutex_unlock(&alarm_setrtc_mutex);
++              if (rv < 0) {
++                      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_ERRORS,
++                          "Failed to set RTC, time will be lost on reboot\n");
++                      goto err1;
++              }
++              break;
++      case ANDROID_ALARM_GET_TIME(0):
++              mutex_lock(&alarm_setrtc_mutex);
++              spin_lock_irqsave(&alarm_slock, flags);
++              if (alarm_type != ANDROID_ALARM_SYSTEMTIME) {
++                      getnstimeofday(&tmp_time);
++                      if (alarm_type >= ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP)
++                              tmp_time = timespec_sub(tmp_time,
++                                                      elapsed_rtc_delta);
++              } else
++                      ktime_get_ts(&tmp_time);
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              mutex_unlock(&alarm_setrtc_mutex);
++              if (copy_to_user((void __user *)arg, &tmp_time,
++                  sizeof(tmp_time))) {
++                      rv = -EFAULT;
++                      goto err1;
++              }
++              break;
++
++      default:
++              rv = -EINVAL;
++              goto err1;
++      }
++err1:
++      return rv;
++}
++
++static int alarm_open(struct inode *inode, struct file *file)
++{
++      file->private_data = NULL;
++      return 0;
++}
++
++static int alarm_release(struct inode *inode, struct file *file)
++{
++      int i;
++      unsigned long flags;
++
++      spin_lock_irqsave(&alarm_slock, flags);
++      if (file->private_data != 0) {
++              for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) {
++                      uint32_t alarm_type_mask = 1U << i;
++                      if (alarm_enabled & alarm_type_mask) {
++                              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++                                      "alarm_release: clear alarm, "
++                                      "pending %d\n",
++                                      !!(alarm_pending & alarm_type_mask));
++                              alarm_enabled &= ~alarm_type_mask;
++                      }
++                      spin_unlock_irqrestore(&alarm_slock, flags);
++                      hrtimer_cancel(&alarm_timer[i]);
++                      spin_lock_irqsave(&alarm_slock, flags);
++              }
++              if (alarm_pending | wait_pending) {
++                      if (alarm_pending)
++                              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++                                      "alarm_release: clear pending alarms "
++                                      "%x\n", alarm_pending);
++                      wake_unlock(&alarm_wake_lock);
++                      wait_pending = 0;
++                      alarm_pending = 0;
++              }
++              alarm_opened = 0;
++      }
++      spin_unlock_irqrestore(&alarm_slock, flags);
++      return 0;
++}
++
++static enum hrtimer_restart alarm_timer_triggered(struct hrtimer *timer)
++{
++      unsigned long flags;
++      enum android_alarm_type alarm_type = (timer - alarm_timer);
++      uint32_t alarm_type_mask = 1U << alarm_type;
++
++
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INT,
++                            "alarm_timer_triggered type %d\n", alarm_type);
++      spin_lock_irqsave(&alarm_slock, flags);
++      if (alarm_enabled & alarm_type_mask) {
++              wake_lock_timeout(&alarm_wake_lock, 5 * HZ);
++              alarm_enabled &= ~alarm_type_mask;
++              alarm_pending |= alarm_type_mask;
++              wake_up(&alarm_wait_queue);
++      }
++      spin_unlock_irqrestore(&alarm_slock, flags);
++      return HRTIMER_NORESTART;
++}
++
++static void alarm_triggered_func(void *p)
++{
++      struct rtc_device *rtc = alarm_rtc_dev;
++      if (!(rtc->irq_data & RTC_AF))
++              return;
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INT, "rtc alarm triggered\n");
++      wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
++}
++
++int alarm_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      int                 err = 0;
++      unsigned long       flags;
++      struct rtc_wkalrm   rtc_alarm;
++      struct rtc_time     rtc_current_rtc_time;
++      unsigned long       rtc_current_time;
++      unsigned long       rtc_alarm_time;
++      struct timespec     rtc_current_timespec;
++      struct timespec     rtc_delta;
++      struct timespec     elapsed_realtime_alarm_time;
++
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_FLOW,
++                            "alarm_suspend(%p, %d)\n", pdev, state.event);
++      spin_lock_irqsave(&alarm_slock, flags);
++      if (alarm_pending && !wake_lock_active(&alarm_wake_lock)) {
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++                                    "alarm pending\n");
++              err = -EBUSY;
++              goto err1;
++      }
++      if (alarm_enabled & ANDROID_ALARM_WAKEUP_MASK) {
++              spin_unlock_irqrestore(&alarm_slock, flags);
++              if (alarm_enabled & ANDROID_ALARM_RTC_WAKEUP_MASK)
++                      hrtimer_cancel(&alarm_timer[ANDROID_ALARM_RTC_WAKEUP]);
++              if (alarm_enabled & ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
++                      hrtimer_cancel(&alarm_timer[
++                                      ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP]);
++
++              rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
++              rtc_current_timespec.tv_nsec = 0;
++              rtc_tm_to_time(&rtc_current_rtc_time,
++                             &rtc_current_timespec.tv_sec);
++              save_time_delta(&rtc_delta, &rtc_current_timespec);
++              set_normalized_timespec(&elapsed_realtime_alarm_time,
++                      alarm_time[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP]
++                      .tv_sec + elapsed_rtc_delta.tv_sec,
++                      alarm_time[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP]
++                      .tv_nsec + elapsed_rtc_delta.tv_nsec);
++              if ((alarm_enabled & ANDROID_ALARM_RTC_WAKEUP_MASK) &&
++                  (!(alarm_enabled &
++                     ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK) ||
++                   timespec_compare(&alarm_time[ANDROID_ALARM_RTC_WAKEUP],
++                                    &elapsed_realtime_alarm_time) < 0))
++                      rtc_alarm_time = timespec_sub(
++                                      alarm_time[ANDROID_ALARM_RTC_WAKEUP],
++                                      rtc_delta).tv_sec;
++              else
++                      rtc_alarm_time = timespec_sub(
++                              elapsed_realtime_alarm_time, rtc_delta).tv_sec;
++              rtc_time_to_tm(rtc_alarm_time, &rtc_alarm.time);
++              rtc_alarm.enabled = 1;
++              rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
++              rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
++              rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
++              ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++                      "rtc alarm set at %ld, now %ld, rtc delta %ld.%09ld\n",
++                      rtc_alarm_time, rtc_current_time,
++                      rtc_delta.tv_sec, rtc_delta.tv_nsec);
++              if (rtc_current_time + 1 >= rtc_alarm_time) {
++                      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++                                            "alarm about to go off\n");
++                      memset(&rtc_alarm, 0, sizeof(rtc_alarm));
++                      rtc_alarm.enabled = 0;
++                      rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
++
++                      spin_lock_irqsave(&alarm_slock, flags);
++                      wake_lock_timeout(&alarm_rtc_wake_lock, 2 * HZ);
++                      alarm_start_hrtimer(ANDROID_ALARM_RTC_WAKEUP);
++                      alarm_start_hrtimer(
++                              ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP);
++                      err = -EBUSY;
++                      spin_unlock_irqrestore(&alarm_slock, flags);
++              }
++      } else {
++err1:
++              spin_unlock_irqrestore(&alarm_slock, flags);
++      }
++      return err;
++}
++
++int alarm_resume(struct platform_device *pdev)
++{
++      struct rtc_wkalrm alarm;
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_FLOW,
++                            "alarm_resume(%p)\n", pdev);
++      if (alarm_enabled & ANDROID_ALARM_WAKEUP_MASK) {
++              memset(&alarm, 0, sizeof(alarm));
++              alarm.enabled = 0;
++              rtc_set_alarm(alarm_rtc_dev, &alarm);
++              alarm_start_hrtimer(ANDROID_ALARM_RTC_WAKEUP);
++              alarm_start_hrtimer(ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP);
++      }
++      return 0;
++}
++
++static struct rtc_task alarm_rtc_task = {
++      .func = alarm_triggered_func
++};
++
++static struct file_operations alarm_fops = {
++      .owner = THIS_MODULE,
++      .unlocked_ioctl = alarm_ioctl,
++      .open = alarm_open,
++      .release = alarm_release,
++};
++
++static struct miscdevice alarm_device = {
++      .minor = MISC_DYNAMIC_MINOR,
++      .name = "alarm",
++      .fops = &alarm_fops,
++};
++
++static int rtc_alarm_add_device(struct device *dev,
++                              struct class_interface *class_intf)
++{
++      int err;
++      struct rtc_device *rtc = to_rtc_device(dev);
++
++      mutex_lock(&alarm_setrtc_mutex);
++
++      if (alarm_rtc_dev) {
++              err = -EBUSY;
++              goto err1;
++      }
++
++      err = misc_register(&alarm_device);
++      if (err)
++              goto err1;
++      alarm_platform_dev =
++              platform_device_register_simple("alarm", -1, NULL, 0);
++      if (IS_ERR(alarm_platform_dev)) {
++              err = PTR_ERR(alarm_platform_dev);
++              goto err2;
++      }
++      err = rtc_irq_register(rtc, &alarm_rtc_task);
++      if (err)
++              goto err3;
++      alarm_rtc_dev = rtc;
++      mutex_unlock(&alarm_setrtc_mutex);
++
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO, "alarm: parent %p\n",
++                            alarm_platform_dev->dev.power.pm_parent);
++      return 0;
++
++err3:
++      platform_device_unregister(alarm_platform_dev);
++err2:
++      misc_deregister(&alarm_device);
++err1:
++      mutex_unlock(&alarm_setrtc_mutex);
++      return err;
++}
++
++static void rtc_alarm_remove_device(struct device *dev,
++                                  struct class_interface *class_intf)
++{
++      if (dev == &alarm_rtc_dev->dev) {
++              rtc_irq_unregister(alarm_rtc_dev, &alarm_rtc_task);
++              platform_device_unregister(alarm_platform_dev);
++              misc_deregister(&alarm_device);
++              alarm_rtc_dev = NULL;
++      }
++}
++
++static struct class_interface rtc_alarm_interface = {
++      .add_dev = &rtc_alarm_add_device,
++      .remove_dev = &rtc_alarm_remove_device,
++};
++
++static struct platform_driver alarm_driver = {
++      .suspend = alarm_suspend,
++      .resume = alarm_resume,
++      .driver = {
++              .name = "alarm"
++      }
++};
++
++static int __init alarm_late_init(void)
++{
++      unsigned long   flags;
++      struct timespec system_time;
++
++      /* this needs to run after the rtc is read at boot */
++      spin_lock_irqsave(&alarm_slock, flags);
++      /* We read the current rtc and system time so we can later calulate
++       * elasped realtime to be (boot_systemtime + rtc - boot_rtc) ==
++       * (rtc - (boot_rtc - boot_systemtime))
++       */
++      getnstimeofday(&elapsed_rtc_delta);
++      ktime_get_ts(&system_time);
++      elapsed_rtc_delta = timespec_sub(elapsed_rtc_delta, system_time);
++      spin_unlock_irqrestore(&alarm_slock, flags);
++
++      ANDROID_ALARM_DPRINTF(ANDROID_ALARM_PRINT_INFO,
++              "alarm_late_init: rtc to elapsed realtime delta %ld.%09ld\n",
++              elapsed_rtc_delta.tv_sec, elapsed_rtc_delta.tv_nsec);
++      return 0;
++}
++
++static int __init alarm_init(void)
++{
++      int err;
++      int i;
++
++      for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
++              hrtimer_init(&alarm_timer[i], CLOCK_REALTIME, HRTIMER_MODE_ABS);
++              alarm_timer[i].function = alarm_timer_triggered;
++      }
++      hrtimer_init(&alarm_timer[ANDROID_ALARM_SYSTEMTIME],
++                   CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
++      alarm_timer[ANDROID_ALARM_SYSTEMTIME].function = alarm_timer_triggered;
++      err = platform_driver_register(&alarm_driver);
++      if (err < 0)
++              goto err1;
++      wake_lock_init(&alarm_wake_lock, WAKE_LOCK_SUSPEND, "alarm");
++      wake_lock_init(&alarm_rtc_wake_lock, WAKE_LOCK_SUSPEND, "alarm_rtc");
++      rtc_alarm_interface.class = rtc_class;
++      err = class_interface_register(&rtc_alarm_interface);
++      if (err < 0)
++              goto err2;
++
++      return 0;
++
++err2:
++      wake_lock_destroy(&alarm_rtc_wake_lock);
++      wake_lock_destroy(&alarm_wake_lock);
++      platform_driver_unregister(&alarm_driver);
++err1:
++      return err;
++}
++
++static void  __exit alarm_exit(void)
++{
++      class_interface_unregister(&rtc_alarm_interface);
++      wake_lock_destroy(&alarm_rtc_wake_lock);
++      wake_lock_destroy(&alarm_wake_lock);
++      platform_driver_unregister(&alarm_driver);
++}
++
++late_initcall(alarm_late_init);
++module_init(alarm_init);
++module_exit(alarm_exit);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/binder.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/binder.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/binder.c     2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/binder.c  2009-05-10 22:28:00.000000000 +0200
+@@ -54,7 +54,7 @@
+ #define SZ_4M                               0x400000
+ #endif
+-#ifndef __i386__
++#if !defined(__i386__) && !defined(__arm__)
+ #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE | VM_EXEC)
+ #else
+ #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE)
+@@ -2649,14 +2649,14 @@
+ {
+       struct binder_proc *proc = vma->vm_private_data;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
++              printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot);
+       dump_stack();
+ }
+ static void binder_vma_close(struct vm_area_struct *vma)
+ {
+       struct binder_proc *proc = vma->vm_private_data;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
++              printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot);
+       proc->vma = NULL;
+ }
+@@ -2677,7 +2677,7 @@
+               vma->vm_end = vma->vm_start + SZ_4M;
+       if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
+-              printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
++              printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot);
+       if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) {
+               ret = -EPERM;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/consoleearlysuspend.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/consoleearlysuspend.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/consoleearlysuspend.c        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/consoleearlysuspend.c     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,78 @@
++/* kernel/power/consoleearlysuspend.c
++ *
++ * Copyright (C) 2005-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/console.h>
++#include <linux/earlysuspend.h>
++#include <linux/kbd_kern.h>
++#include <linux/module.h>
++#include <linux/vt_kern.h>
++#include <linux/wait.h>
++
++#define EARLY_SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
++
++static int orig_fgconsole;
++static void console_early_suspend(struct early_suspend *h)
++{
++      acquire_console_sem();
++      orig_fgconsole = fg_console;
++      if (vc_allocate(EARLY_SUSPEND_CONSOLE))
++              goto err;
++      if (set_console(EARLY_SUSPEND_CONSOLE))
++              goto err;
++      release_console_sem();
++
++      if (vt_waitactive(EARLY_SUSPEND_CONSOLE))
++              pr_warning("console_early_suspend: Can't switch VCs.\n");
++      return;
++err:
++      pr_warning("console_early_suspend: Can't set console\n");
++      release_console_sem();
++}
++
++static void console_late_resume(struct early_suspend *h)
++{
++      int ret;
++      acquire_console_sem();
++      ret = set_console(orig_fgconsole);
++      release_console_sem();
++      if (ret) {
++              pr_warning("console_late_resume: Can't set console.\n");
++              return;
++      }
++
++      if (vt_waitactive(orig_fgconsole))
++              pr_warning("console_late_resume: Can't switch VCs.\n");
++}
++
++static struct early_suspend console_early_suspend_desc = {
++      .level = EARLY_SUSPEND_LEVEL_STOP_DRAWING,
++      .suspend = console_early_suspend,
++      .resume = console_late_resume,
++};
++
++static int __init console_early_suspend_init(void)
++{
++      register_early_suspend(&console_early_suspend_desc);
++      return 0;
++}
++
++static void  __exit console_early_suspend_exit(void)
++{
++      unregister_early_suspend(&console_early_suspend_desc);
++}
++
++module_init(console_early_suspend_init);
++module_exit(console_early_suspend_exit);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/earlysuspend.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/earlysuspend.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/earlysuspend.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/earlysuspend.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,178 @@
++/* kernel/power/earlysuspend.c
++ *
++ * Copyright (C) 2005-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/earlysuspend.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/rtc.h>
++#include <linux/syscalls.h> /* sys_sync */
++#include <linux/wakelock.h>
++#include <linux/workqueue.h>
++
++#include "power.h"
++
++enum {
++      DEBUG_USER_STATE = 1U << 0,
++      DEBUG_SUSPEND = 1U << 2,
++};
++static int debug_mask = DEBUG_USER_STATE;
++module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
++
++static DEFINE_MUTEX(early_suspend_lock);
++static LIST_HEAD(early_suspend_handlers);
++static void early_suspend(struct work_struct *work);
++static void late_resume(struct work_struct *work);
++static DECLARE_WORK(early_suspend_work, early_suspend);
++static DECLARE_WORK(late_resume_work, late_resume);
++static DEFINE_SPINLOCK(state_lock);
++enum {
++      SUSPEND_REQUESTED = 0x1,
++      SUSPENDED = 0x2,
++      SUSPEND_REQUESTED_AND_SUSPENDED = SUSPEND_REQUESTED | SUSPENDED,
++};
++static int state;
++
++void register_early_suspend(struct early_suspend *handler)
++{
++      struct list_head *pos;
++
++      mutex_lock(&early_suspend_lock);
++      list_for_each(pos, &early_suspend_handlers) {
++              struct early_suspend *e;
++              e = list_entry(pos, struct early_suspend, link);
++              if (e->level > handler->level)
++                      break;
++      }
++      list_add_tail(&handler->link, pos);
++      if ((state & SUSPENDED) && handler->suspend)
++              handler->suspend(handler);
++      mutex_unlock(&early_suspend_lock);
++}
++EXPORT_SYMBOL(register_early_suspend);
++
++void unregister_early_suspend(struct early_suspend *handler)
++{
++      mutex_lock(&early_suspend_lock);
++      list_del(&handler->link);
++      mutex_unlock(&early_suspend_lock);
++}
++EXPORT_SYMBOL(unregister_early_suspend);
++
++static void early_suspend(struct work_struct *work)
++{
++      struct early_suspend *pos;
++      unsigned long irqflags;
++      int abort = 0;
++
++      mutex_lock(&early_suspend_lock);
++      spin_lock_irqsave(&state_lock, irqflags);
++      if (state == SUSPEND_REQUESTED)
++              state |= SUSPENDED;
++      else
++              abort = 1;
++      spin_unlock_irqrestore(&state_lock, irqflags);
++
++      if (abort) {
++              if (debug_mask & DEBUG_SUSPEND)
++                      pr_info("early_suspend: abort, state %d\n", state);
++              mutex_unlock(&early_suspend_lock);
++              goto abort;
++      }
++
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("early_suspend: call handlers\n");
++      list_for_each_entry(pos, &early_suspend_handlers, link) {
++              if (pos->suspend != NULL)
++                      pos->suspend(pos);
++      }
++      mutex_unlock(&early_suspend_lock);
++
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("early_suspend: sync\n");
++
++      sys_sync();
++abort:
++      spin_lock_irqsave(&state_lock, irqflags);
++      if (state == SUSPEND_REQUESTED_AND_SUSPENDED)
++              wake_unlock(&main_wake_lock);
++      spin_unlock_irqrestore(&state_lock, irqflags);
++}
++
++static void late_resume(struct work_struct *work)
++{
++      struct early_suspend *pos;
++      unsigned long irqflags;
++      int abort = 0;
++
++      mutex_lock(&early_suspend_lock);
++      spin_lock_irqsave(&state_lock, irqflags);
++      if (state == SUSPENDED)
++              state &= ~SUSPENDED;
++      else
++              abort = 1;
++      spin_unlock_irqrestore(&state_lock, irqflags);
++
++      if (abort) {
++              if (debug_mask & DEBUG_SUSPEND)
++                      pr_info("late_resume: abort, state %d\n", state);
++              goto abort;
++      }
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("late_resume: call handlers\n");
++      list_for_each_entry_reverse(pos, &early_suspend_handlers, link)
++              if (pos->resume != NULL)
++                      pos->resume(pos);
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("late_resume: done\n");
++abort:
++      mutex_unlock(&early_suspend_lock);
++}
++
++void request_suspend_state(suspend_state_t new_state)
++{
++      unsigned long irqflags;
++      int old_sleep;
++
++      spin_lock_irqsave(&state_lock, irqflags);
++      old_sleep = state & SUSPEND_REQUESTED;
++      if (debug_mask & DEBUG_USER_STATE) {
++              struct timespec ts;
++              struct rtc_time tm;
++              getnstimeofday(&ts);
++              rtc_time_to_tm(ts.tv_sec, &tm);
++              pr_info("request_suspend_state: %s (%d->%d) at %lld "
++                      "(%d-%02d-%02d %02d:%02d:%02d.%09lu UTC)\n",
++                      new_state != PM_SUSPEND_ON ? "sleep" : "wakeup",
++                      requested_suspend_state, new_state,
++                      ktime_to_ns(ktime_get()),
++                      tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
++                      tm.tm_hour, tm.tm_min, tm.tm_sec, ts.tv_nsec);
++      }
++      if (!old_sleep && new_state != PM_SUSPEND_ON) {
++              state |= SUSPEND_REQUESTED;
++              queue_work(suspend_work_queue, &early_suspend_work);
++      } else if (old_sleep && new_state == PM_SUSPEND_ON) {
++              state &= ~SUSPEND_REQUESTED;
++              wake_lock(&main_wake_lock);
++              queue_work(suspend_work_queue, &late_resume_work);
++      }
++      requested_suspend_state = new_state;
++      spin_unlock_irqrestore(&state_lock, irqflags);
++}
++
++suspend_state_t get_suspend_state(void)
++{
++      return requested_suspend_state;
++}
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/fbearlysuspend.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/fbearlysuspend.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/fbearlysuspend.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/fbearlysuspend.c  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,153 @@
++/* kernel/power/fbearlysuspend.c
++ *
++ * Copyright (C) 2005-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/earlysuspend.h>
++#include <linux/module.h>
++#include <linux/wait.h>
++
++#include "power.h"
++
++static wait_queue_head_t fb_state_wq;
++static DEFINE_SPINLOCK(fb_state_lock);
++static enum {
++      FB_STATE_STOPPED_DRAWING,
++      FB_STATE_REQUEST_STOP_DRAWING,
++      FB_STATE_DRAWING_OK,
++} fb_state;
++
++/* tell userspace to stop drawing, wait for it to stop */
++static void stop_drawing_early_suspend(struct early_suspend *h)
++{
++      int ret;
++      unsigned long irq_flags;
++
++      spin_lock_irqsave(&fb_state_lock, irq_flags);
++      fb_state = FB_STATE_REQUEST_STOP_DRAWING;
++      spin_unlock_irqrestore(&fb_state_lock, irq_flags);
++
++      wake_up_all(&fb_state_wq);
++      ret = wait_event_timeout(fb_state_wq,
++                               fb_state == FB_STATE_STOPPED_DRAWING,
++                               HZ);
++      if (unlikely(fb_state != FB_STATE_STOPPED_DRAWING))
++              pr_warning("stop_drawing_early_suspend: timeout waiting for "
++                         "userspace to stop drawing\n");
++}
++
++/* tell userspace to start drawing */
++static void start_drawing_late_resume(struct early_suspend *h)
++{
++      unsigned long irq_flags;
++
++      spin_lock_irqsave(&fb_state_lock, irq_flags);
++      fb_state = FB_STATE_DRAWING_OK;
++      spin_unlock_irqrestore(&fb_state_lock, irq_flags);
++      wake_up(&fb_state_wq);
++}
++
++static struct early_suspend stop_drawing_early_suspend_desc = {
++      .level = EARLY_SUSPEND_LEVEL_STOP_DRAWING,
++      .suspend = stop_drawing_early_suspend,
++      .resume = start_drawing_late_resume,
++};
++
++static ssize_t wait_for_fb_sleep_show(struct kobject *kobj,
++                                    struct kobj_attribute *attr, char *buf)
++{
++      char *s = buf;
++      int ret;
++
++      ret = wait_event_interruptible(fb_state_wq,
++                                     fb_state != FB_STATE_DRAWING_OK);
++      if (ret && fb_state == FB_STATE_DRAWING_OK)
++              return ret;
++      else
++              s += sprintf(buf, "sleeping");
++      return s - buf;
++}
++
++static ssize_t wait_for_fb_wake_show(struct kobject *kobj,
++                                   struct kobj_attribute *attr, char *buf)
++{
++      char *s = buf;
++      int ret;
++      unsigned long irq_flags;
++
++      spin_lock_irqsave(&fb_state_lock, irq_flags);
++      if (fb_state == FB_STATE_REQUEST_STOP_DRAWING) {
++              fb_state = FB_STATE_STOPPED_DRAWING;
++              wake_up(&fb_state_wq);
++      }
++      spin_unlock_irqrestore(&fb_state_lock, irq_flags);
++
++      ret = wait_event_interruptible(fb_state_wq,
++                                     fb_state == FB_STATE_DRAWING_OK);
++      if (ret && fb_state != FB_STATE_DRAWING_OK)
++              return ret;
++      else
++              s += sprintf(buf, "awake");
++
++      return s - buf;
++}
++
++#define power_ro_attr(_name) \
++static struct kobj_attribute _name##_attr = { \
++      .attr   = {                             \
++              .name = __stringify(_name),     \
++              .mode = 0444,                   \
++      },                                      \
++      .show   = _name##_show,                 \
++      .store  = NULL,         \
++}
++
++power_ro_attr(wait_for_fb_sleep);
++power_ro_attr(wait_for_fb_wake);
++
++static struct attribute *g[] = {
++      &wait_for_fb_sleep_attr.attr,
++      &wait_for_fb_wake_attr.attr,
++      NULL,
++};
++
++static struct attribute_group attr_group = {
++      .attrs = g,
++};
++
++static int __init android_power_init(void)
++{
++      int ret;
++
++      init_waitqueue_head(&fb_state_wq);
++      fb_state = FB_STATE_DRAWING_OK;
++
++      ret = sysfs_create_group(power_kobj, &attr_group);
++      if (ret) {
++              pr_err("android_power_init: sysfs_create_group failed\n");
++              return ret;
++      }
++
++      register_early_suspend(&stop_drawing_early_suspend_desc);
++      return 0;
++}
++
++static void  __exit android_power_exit(void)
++{
++      unregister_early_suspend(&stop_drawing_early_suspend_desc);
++      sysfs_remove_group(power_kobj, &attr_group);
++}
++
++module_init(android_power_init);
++module_exit(android_power_exit);
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/Kconfig linux-2.6.29-rc3.owrt.om/drivers/staging/android/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/Kconfig      2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/Kconfig   2009-05-10 22:28:00.000000000 +0200
+@@ -83,4 +83,80 @@
+       ---help---
+         Register processes to be killed when memory is low
++config ANDROID_HAS_WAKELOCK
++      bool
++
++config ANDROID_HAS_EARLYSUSPEND
++      bool
++
++config ANDROID_WAKELOCK
++      bool "Wake lock"
++      depends on PM && RTC_CLASS
++      default n
++      select ANDROID_HAS_WAKELOCK
++      ---help---
++        Enable wakelocks. When user space request a sleep state the
++        sleep request will be delayed until no wake locks are held.
++
++config ANDROID_WAKELOCK_STAT
++      bool "Wake lock stats"
++      depends on WAKELOCK
++      default y
++      ---help---
++        Report wake lock stats in /proc/wakelocks
++
++config ANDROID_USER_WAKELOCK
++      bool "Userspace wake locks"
++      depends on ANDROID_WAKELOCK
++      default y
++      ---help---
++        User-space wake lock api. Write "lockname" or "lockname timeout"
++        to /sys/power/wake_lock lock and if needed create a wake lock.
++        Write "lockname" to /sys/power/wake_unlock to unlock a user wake
++        lock.
++
++config ANDROID_EARLYSUSPEND
++      bool "Early suspend"
++      depends on ANDROID_WAKELOCK
++      default y
++      select ANDROID_HAS_EARLYSUSPEND
++      ---help---
++        Call early suspend handlers when the user requested sleep state
++        changes.
++
++choice
++      prompt "User-space screen access"
++      default ANDROID_FB_EARLYSUSPEND if !FRAMEBUFFER_CONSOLE
++      default ANDROID_CONSOLE_EARLYSUSPEND
++      depends on ANDROID_HAS_EARLYSUSPEND
++
++      config NO_USER_SPACE_SCREEN_ACCESS_CONTROL
++              bool "None"
++
++      config ANDROID_CONSOLE_EARLYSUSPEND
++              bool "Console switch on early-suspend"
++              depends on ANDROID_HAS_EARLYSUSPEND && VT
++              ---help---
++                Register early suspend handler to perform a console switch to
++                when user-space should stop drawing to the screen and a switch
++                back when it should resume.
++
++      config ANDROID_FB_EARLYSUSPEND
++              bool "Sysfs interface"
++              depends on ANDROID_HAS_EARLYSUSPEND
++              ---help---
++                Register early suspend handler that notifies and waits for
++                user-space through sysfs when user-space should stop drawing
++                to the screen and notifies user-space when it should resume.
++endchoice
++
++config ANDROID_POWER_ALARM
++      bool "Android alarm driver"
++      depends on ANDROID_WAKELOCK
++      default y
++
++config ANDROID_PARANOID_NETWORK
++      bool "Only allow certain groups to create sockets"
++      default y
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/Makefile linux-2.6.29-rc3.owrt.om/drivers/staging/android/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/Makefile     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/Makefile  2009-05-10 22:28:00.000000000 +0200
+@@ -3,3 +3,9 @@
+ obj-$(CONFIG_ANDROID_RAM_CONSOLE)     += ram_console.o
+ obj-$(CONFIG_ANDROID_TIMED_GPIO)      += timed_gpio.o
+ obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)       += lowmemorykiller.o
++obj-$(CONFIG_ANDROID_POWER_ALARM)     += alarm.o
++obj-$(CONFIG_ANDROID_WAKELOCK)                += wakelock.o
++obj-$(CONFIG_ANDROID_USER_WAKELOCK)   += userwakelock.o
++obj-$(CONFIG_ANDROID_EARLYSUSPEND)    += earlysuspend.o
++obj-$(CONFIG_ANDROID_CONSOLE_EARLYSUSPEND)    += consoleearlysuspend.o
++obj-$(CONFIG_ANDROID_FB_EARLYSUSPEND)         += fbearlysuspend.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/power.h linux-2.6.29-rc3.owrt.om/drivers/staging/android/power.h
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/power.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/power.h   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1 @@
++#include "../../../kernel/power/power.h"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/timed_gpio.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/timed_gpio.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/timed_gpio.c 2009-05-10 22:08:44.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/timed_gpio.c      2009-05-10 22:28:00.000000000 +0200
+@@ -18,7 +18,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/hrtimer.h>
+ #include <linux/err.h>
+-#include <asm/arch/gpio.h>
++#include <linux/gpio.h>
+ #include "timed_gpio.h"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/userwakelock.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/userwakelock.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/userwakelock.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/userwakelock.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,245 @@
++/* kernel/power/userwakelock.c
++ *
++ * Copyright (C) 2005-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/ctype.h>
++#include <linux/module.h>
++#include <linux/wakelock.h>
++
++#include "power.h"
++
++enum {
++      DEBUG_FAILURE   = BIT(0),
++      DEBUG_ERROR     = BIT(1),
++      DEBUG_NEW       = BIT(2),
++      DEBUG_ACCESS    = BIT(3),
++      DEBUG_LOOKUP    = BIT(4),
++};
++static int debug_mask = DEBUG_FAILURE;
++module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
++
++static DEFINE_MUTEX(tree_lock);
++
++struct user_wake_lock {
++      struct rb_node          node;
++      struct wake_lock        wake_lock;
++      char                    name[0];
++};
++struct rb_root user_wake_locks;
++
++static struct user_wake_lock *lookup_wake_lock_name(
++      const char *buf, int allocate, long *timeoutptr)
++{
++      struct rb_node **p = &user_wake_locks.rb_node;
++      struct rb_node *parent = NULL;
++      struct user_wake_lock *l;
++      int diff;
++      u64 timeout;
++      int name_len;
++      const char *arg;
++
++      /* Find length of lock name and start of optional timeout string */
++      arg = buf;
++      while (*arg && !isspace(*arg))
++              arg++;
++      name_len = arg - buf;
++      if (!name_len)
++              goto bad_arg;
++      while (isspace(*arg))
++              arg++;
++
++      /* Process timeout string */
++      if (timeoutptr && *arg) {
++              timeout = simple_strtoull(arg, (char **)&arg, 0);
++              while (isspace(*arg))
++                      arg++;
++              if (*arg)
++                      goto bad_arg;
++              /* convert timeout from nanoseconds to jiffies > 0 */
++              timeout += (NSEC_PER_SEC / HZ) - 1;
++              do_div(timeout, (NSEC_PER_SEC / HZ));
++              if (timeout <= 0)
++                      timeout = 1;
++              *timeoutptr = timeout;
++      } else if (*arg)
++              goto bad_arg;
++      else if (timeoutptr)
++              *timeoutptr = 0;
++
++      /* Lookup wake lock in rbtree */
++      while (*p) {
++              parent = *p;
++              l = rb_entry(parent, struct user_wake_lock, node);
++              diff = strncmp(buf, l->name, name_len);
++              if (!diff && l->name[name_len])
++                      diff = -1;
++              if (debug_mask & DEBUG_ERROR)
++                      pr_info("lookup_wake_lock_name: compare %.*s %s %d\n",
++                              name_len, buf, l->name, diff);
++
++              if (diff < 0)
++                      p = &(*p)->rb_left;
++              else if (diff > 0)
++                      p = &(*p)->rb_right;
++              else
++                      return l;
++      }
++
++      /* Allocate and add new wakelock to rbtree */
++      if (!allocate) {
++              if (debug_mask & DEBUG_ERROR)
++                      pr_info("lookup_wake_lock_name: %.*s not found\n",
++                              name_len, buf);
++              return ERR_PTR(-EINVAL);
++      }
++      l = kzalloc(sizeof(*l) + name_len + 1, GFP_KERNEL);
++      if (l == NULL) {
++              if (debug_mask & DEBUG_FAILURE)
++                      pr_err("lookup_wake_lock_name: failed to allocate "
++                              "memory for %.*s\n", name_len, buf);
++              return ERR_PTR(-ENOMEM);
++      }
++      memcpy(l->name, buf, name_len);
++      if (debug_mask & DEBUG_NEW)
++              pr_info("lookup_wake_lock_name: new wake lock %s\n", l->name);
++      wake_lock_init(&l->wake_lock, WAKE_LOCK_SUSPEND, l->name);
++      rb_link_node(&l->node, parent, p);
++      rb_insert_color(&l->node, &user_wake_locks);
++      return l;
++
++bad_arg:
++      if (debug_mask & DEBUG_ERROR)
++              pr_info("lookup_wake_lock_name: wake lock, %.*s, bad arg, %s\n",
++                      name_len, buf, arg);
++      return ERR_PTR(-EINVAL);
++}
++
++ssize_t wake_lock_show(
++      struct kobject *kobj, struct kobj_attribute *attr, char *buf)
++{
++      char *s = buf;
++      char *end = buf + PAGE_SIZE;
++      struct rb_node *n;
++      struct user_wake_lock *l;
++
++      mutex_lock(&tree_lock);
++
++      for (n = rb_first(&user_wake_locks); n != NULL; n = rb_next(n)) {
++              l = rb_entry(n, struct user_wake_lock, node);
++              if (wake_lock_active(&l->wake_lock))
++                      s += scnprintf(s, end - s, "%s ", l->name);
++      }
++      s += scnprintf(s, end - s, "\n");
++
++      mutex_unlock(&tree_lock);
++      return (s - buf);
++}
++
++ssize_t wake_full_lock_store(
++      struct kobject *kobj, struct kobj_attribute *attr,
++      const char *buf, size_t n)
++{
++      long timeout;
++      struct user_wake_lock *l;
++
++      mutex_lock(&tree_lock);
++      l = lookup_wake_lock_name(buf, 1, &timeout);
++      if (IS_ERR(l)) {
++              n = PTR_ERR(l);
++              goto bad_name;
++      }
++
++      if (debug_mask & DEBUG_ACCESS)
++              pr_info("wake_full_lock_store: %s, timeout %ld\n", l->name, timeout);
++
++      if (timeout == 0)
++              timeout = INT_MAX;
++
++      if (timeout)
++              wake_lock_timeout(&l->wake_lock, timeout);
++bad_name:
++      mutex_unlock(&tree_lock);
++      return n;
++}
++
++ssize_t wake_lock_store(
++      struct kobject *kobj, struct kobj_attribute *attr,
++      const char *buf, size_t n)
++{
++      long timeout;
++      struct user_wake_lock *l;
++
++      mutex_lock(&tree_lock);
++      l = lookup_wake_lock_name(buf, 1, &timeout);
++      if (IS_ERR(l)) {
++              n = PTR_ERR(l);
++              goto bad_name;
++      }
++
++      if (debug_mask & DEBUG_ACCESS)
++              pr_info("wake_lock_store: %s, timeout %ld\n", l->name, timeout);
++
++      if (timeout)
++              wake_lock_timeout(&l->wake_lock, timeout);
++      else
++              wake_lock(&l->wake_lock);
++bad_name:
++      mutex_unlock(&tree_lock);
++      return n;
++}
++
++
++ssize_t wake_unlock_show(
++      struct kobject *kobj, struct kobj_attribute *attr, char *buf)
++{
++      char *s = buf;
++      char *end = buf + PAGE_SIZE;
++      struct rb_node *n;
++      struct user_wake_lock *l;
++
++      mutex_lock(&tree_lock);
++
++      for (n = rb_first(&user_wake_locks); n != NULL; n = rb_next(n)) {
++              l = rb_entry(n, struct user_wake_lock, node);
++              if (!wake_lock_active(&l->wake_lock))
++                      s += scnprintf(s, end - s, "%s ", l->name);
++      }
++      s += scnprintf(s, end - s, "\n");
++
++      mutex_unlock(&tree_lock);
++      return (s - buf);
++}
++
++ssize_t wake_unlock_store(
++      struct kobject *kobj, struct kobj_attribute *attr,
++      const char *buf, size_t n)
++{
++      struct user_wake_lock *l;
++
++      mutex_lock(&tree_lock);
++      l = lookup_wake_lock_name(buf, 0, NULL);
++      if (IS_ERR(l)) {
++              n = PTR_ERR(l);
++              goto not_found;
++      }
++
++      if (debug_mask & DEBUG_ACCESS)
++              pr_info("wake_unlock_store: %s\n", l->name);
++
++      wake_unlock(&l->wake_lock);
++not_found:
++      mutex_unlock(&tree_lock);
++      return n;
++}
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/staging/android/wakelock.c linux-2.6.29-rc3.owrt.om/drivers/staging/android/wakelock.c
+--- linux-2.6.29-rc3.owrt/drivers/staging/android/wakelock.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/staging/android/wakelock.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,605 @@
++/* kernel/power/wakelock.c
++ *
++ * Copyright (C) 2005-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/suspend.h>
++#include <linux/syscalls.h> /* sys_sync */
++#include <linux/wakelock.h>
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++#include <linux/proc_fs.h>
++#endif
++#include "power.h"
++
++enum {
++      DEBUG_EXIT_SUSPEND = 1U << 0,
++      DEBUG_WAKEUP = 1U << 1,
++      DEBUG_SUSPEND = 1U << 2,
++      DEBUG_EXPIRE = 1U << 3,
++      DEBUG_WAKE_LOCK = 1U << 4,
++};
++static int debug_mask = DEBUG_EXIT_SUSPEND | DEBUG_WAKEUP;
++
++module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
++
++#define WAKE_LOCK_TYPE_MASK              (0x0f)
++#define WAKE_LOCK_INITIALIZED            (1U << 8)
++#define WAKE_LOCK_ACTIVE                 (1U << 9)
++#define WAKE_LOCK_AUTO_EXPIRE            (1U << 10)
++#define WAKE_LOCK_PREVENTING_SUSPEND     (1U << 11)
++
++static DEFINE_SPINLOCK(list_lock);
++static LIST_HEAD(inactive_locks);
++static struct list_head active_wake_locks[WAKE_LOCK_TYPE_COUNT];
++static int current_event_num;
++struct workqueue_struct *suspend_work_queue;
++struct wake_lock main_wake_lock;
++suspend_state_t requested_suspend_state = PM_SUSPEND_MEM;
++static struct wake_lock unknown_wakeup;
++
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++static struct wake_lock deleted_wake_locks;
++static ktime_t last_sleep_time_update;
++static int wait_for_wakeup;
++
++int get_expired_time(struct wake_lock *lock, ktime_t *expire_time)
++{
++      struct timespec ts;
++      struct timespec kt;
++      struct timespec tomono;
++      struct timespec delta;
++      unsigned long seq;
++      long timeout;
++
++      if (!(lock->flags & WAKE_LOCK_AUTO_EXPIRE))
++              return 0;
++      do {
++              seq = read_seqbegin(&xtime_lock);
++              timeout = lock->expires - jiffies;
++              if (timeout > 0)
++                      return 0;
++              kt = current_kernel_time();
++              tomono = wall_to_monotonic;
++      } while (read_seqretry(&xtime_lock, seq));
++      jiffies_to_timespec(-timeout, &delta);
++      set_normalized_timespec(&ts, kt.tv_sec + tomono.tv_sec - delta.tv_sec,
++                              kt.tv_nsec + tomono.tv_nsec - delta.tv_nsec);
++      *expire_time = timespec_to_ktime(ts);
++      return 1;
++}
++
++
++static int print_lock_stat(char *buf, struct wake_lock *lock)
++{
++      int lock_count = lock->stat.count;
++      int expire_count = lock->stat.expire_count;
++      ktime_t active_time = ktime_set(0, 0);
++      ktime_t total_time = lock->stat.total_time;
++      ktime_t max_time = lock->stat.max_time;
++      ktime_t prevent_suspend_time = lock->stat.prevent_suspend_time;
++      if (lock->flags & WAKE_LOCK_ACTIVE) {
++              ktime_t now, add_time;
++              int expired = get_expired_time(lock, &now);
++              if (!expired)
++                      now = ktime_get();
++              add_time = ktime_sub(now, lock->stat.last_time);
++              lock_count++;
++              if (!expired)
++                      active_time = add_time;
++              else
++                      expire_count++;
++              total_time = ktime_add(total_time, add_time);
++              if (lock->flags & WAKE_LOCK_PREVENTING_SUSPEND)
++                      prevent_suspend_time = ktime_add(prevent_suspend_time,
++                                      ktime_sub(now, last_sleep_time_update));
++              if (add_time.tv64 > max_time.tv64)
++                      max_time = add_time;
++      }
++
++      return sprintf(buf, "\"%s\"\t%d\t%d\t%d\t%lld\t%lld\t%lld\t%lld\t"
++                     "%lld\n", lock->name, lock_count, expire_count,
++                     lock->stat.wakeup_count, ktime_to_ns(active_time),
++                     ktime_to_ns(total_time),
++                     ktime_to_ns(prevent_suspend_time), ktime_to_ns(max_time),
++                     ktime_to_ns(lock->stat.last_time));
++}
++
++
++static int wakelocks_read_proc(char *page, char **start, off_t off,
++                             int count, int *eof, void *data)
++{
++      unsigned long irqflags;
++      struct wake_lock *lock;
++      int len = 0;
++      char *p = page;
++      int type;
++
++      spin_lock_irqsave(&list_lock, irqflags);
++
++      p += sprintf(p, "name\tcount\texpire_count\twake_count\tactive_since"
++                   "\ttotal_time\tsleep_time\tmax_time\tlast_change\n");
++      list_for_each_entry(lock, &inactive_locks, link) {
++              p += print_lock_stat(p, lock);
++      }
++      for (type = 0; type < WAKE_LOCK_TYPE_COUNT; type++) {
++              list_for_each_entry(lock, &active_wake_locks[type], link)
++                      p += print_lock_stat(p, lock);
++      }
++      spin_unlock_irqrestore(&list_lock, irqflags);
++
++      *start = page + off;
++
++      len = p - page;
++      if (len > off)
++              len -= off;
++      else
++              len = 0;
++
++      return len < count ? len  : count;
++}
++
++static void wake_unlock_stat_locked(struct wake_lock *lock, int expired)
++{
++      ktime_t duration;
++      ktime_t now;
++      if (!(lock->flags & WAKE_LOCK_ACTIVE))
++              return;
++      if (get_expired_time(lock, &now))
++              expired = 1;
++      else
++              now = ktime_get();
++      lock->stat.count++;
++      if (expired)
++              lock->stat.expire_count++;
++      duration = ktime_sub(now, lock->stat.last_time);
++      lock->stat.total_time = ktime_add(lock->stat.total_time, duration);
++      if (ktime_to_ns(duration) > ktime_to_ns(lock->stat.max_time))
++              lock->stat.max_time = duration;
++      lock->stat.last_time = ktime_get();
++      if (lock->flags & WAKE_LOCK_PREVENTING_SUSPEND) {
++              duration = ktime_sub(now, last_sleep_time_update);
++              lock->stat.prevent_suspend_time = ktime_add(
++                      lock->stat.prevent_suspend_time, duration);
++              lock->flags &= ~WAKE_LOCK_PREVENTING_SUSPEND;
++      }
++}
++
++static void update_sleep_wait_stats_locked(int done)
++{
++      struct wake_lock *lock;
++      ktime_t now, etime, elapsed, add;
++      int expired;
++
++      now = ktime_get();
++      elapsed = ktime_sub(now, last_sleep_time_update);
++      list_for_each_entry(lock, &active_wake_locks[WAKE_LOCK_SUSPEND], link) {
++              expired = get_expired_time(lock, &etime);
++              if (lock->flags & WAKE_LOCK_PREVENTING_SUSPEND) {
++                      if (expired)
++                              add = ktime_sub(etime, last_sleep_time_update);
++                      else
++                              add = elapsed;
++                      lock->stat.prevent_suspend_time = ktime_add(
++                              lock->stat.prevent_suspend_time, add);
++              }
++              if (done || expired)
++                      lock->flags &= ~WAKE_LOCK_PREVENTING_SUSPEND;
++              else
++                      lock->flags |= WAKE_LOCK_PREVENTING_SUSPEND;
++      }
++      last_sleep_time_update = now;
++}
++#endif
++
++
++static void expire_wake_lock(struct wake_lock *lock)
++{
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wake_unlock_stat_locked(lock, 1);
++#endif
++      lock->flags &= ~(WAKE_LOCK_ACTIVE | WAKE_LOCK_AUTO_EXPIRE);
++      list_del(&lock->link);
++      list_add(&lock->link, &inactive_locks);
++      if (debug_mask & (DEBUG_WAKE_LOCK | DEBUG_EXPIRE))
++              pr_info("expired wake lock %s\n", lock->name);
++}
++
++static void print_active_locks(int type)
++{
++      unsigned long irqflags;
++      struct wake_lock *lock;
++
++      BUG_ON(type >= WAKE_LOCK_TYPE_COUNT);
++      spin_lock_irqsave(&list_lock, irqflags);
++      list_for_each_entry(lock, &active_wake_locks[type], link) {
++              if (lock->flags & WAKE_LOCK_AUTO_EXPIRE) {
++                      long timeout = lock->expires - jiffies;
++                      if (timeout <= 0)
++                              pr_info("wake lock %s, expired\n", lock->name);
++                      else
++                              pr_info("active wake lock %s, time left %ld\n",
++                                      lock->name, timeout);
++              } else
++                      pr_info("active wake lock %s\n", lock->name);
++      }
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++
++static long has_wake_lock_locked(int type)
++{
++      struct wake_lock *lock, *n;
++      long max_timeout = 0;
++
++      BUG_ON(type >= WAKE_LOCK_TYPE_COUNT);
++      list_for_each_entry_safe(lock, n, &active_wake_locks[type], link) {
++              if (lock->flags & WAKE_LOCK_AUTO_EXPIRE) {
++                      long timeout = lock->expires - jiffies;
++                      if (timeout <= 0)
++                              expire_wake_lock(lock);
++                      else if (timeout > max_timeout)
++                              max_timeout = timeout;
++              } else
++                      return -1;
++      }
++      return max_timeout;
++}
++
++long has_wake_lock(int type)
++{
++      long ret;
++      unsigned long irqflags;
++      spin_lock_irqsave(&list_lock, irqflags);
++      ret = has_wake_lock_locked(type);
++      spin_unlock_irqrestore(&list_lock, irqflags);
++      return ret;
++}
++
++static void suspend(struct work_struct *work)
++{
++      int ret;
++      int entry_event_num;
++
++      if (has_wake_lock(WAKE_LOCK_SUSPEND)) {
++              if (debug_mask & DEBUG_SUSPEND)
++                      pr_info("suspend: abort suspend\n");
++              return;
++      }
++
++      entry_event_num = current_event_num;
++      sys_sync();
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("suspend: enter suspend\n");
++      ret = pm_suspend(requested_suspend_state);
++      if (debug_mask & DEBUG_EXIT_SUSPEND) {
++              struct timespec ts;
++              struct rtc_time tm;
++              getnstimeofday(&ts);
++              rtc_time_to_tm(ts.tv_sec, &tm);
++              pr_info("suspend: exit suspend, ret = %d "
++                      "(%d-%02d-%02d %02d:%02d:%02d.%09lu UTC)\n", ret,
++                      tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
++                      tm.tm_hour, tm.tm_min, tm.tm_sec, ts.tv_nsec);
++      }
++      /* Openmoko needs more times to resume and a timeout is necessary
++       * in any case */
++      if (current_event_num == entry_event_num) {
++              if (debug_mask & DEBUG_SUSPEND)
++                      pr_info("suspend: pm_suspend returned with no event\n");
++              wake_lock_timeout(&unknown_wakeup, HZ / 2);
++      } else {
++              /* create a temp lock to avoid autosuspend */
++              wake_lock_timeout(&unknown_wakeup, 5 * HZ);
++      }
++}
++
++static DECLARE_WORK(suspend_work, suspend);
++
++static void expire_wake_locks(unsigned long data)
++{
++      long has_lock;
++      unsigned long irqflags;
++      if (debug_mask & DEBUG_EXPIRE)
++              pr_info("expire_wake_locks: start\n");
++      if (debug_mask & DEBUG_SUSPEND)
++              print_active_locks(WAKE_LOCK_SUSPEND);
++      spin_lock_irqsave(&list_lock, irqflags);
++      has_lock = has_wake_lock_locked(WAKE_LOCK_SUSPEND);
++      if (debug_mask & DEBUG_EXPIRE)
++              pr_info("expire_wake_locks: done, has_lock %ld\n", has_lock);
++      if (has_lock == 0)
++              queue_work(suspend_work_queue, &suspend_work);
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++static DEFINE_TIMER(expire_timer, expire_wake_locks, 0, 0);
++
++static int power_suspend_late(struct platform_device *pdev, pm_message_t state)
++{
++      int ret = has_wake_lock(WAKE_LOCK_SUSPEND) ? -EAGAIN : 0;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wait_for_wakeup = 1;
++#endif
++      if (debug_mask & DEBUG_SUSPEND)
++              pr_info("power_suspend_late return %d\n", ret);
++      return ret;
++}
++
++static struct platform_driver power_driver = {
++      .driver.name = "power",
++      .suspend_late = power_suspend_late,
++};
++static struct platform_device power_device = {
++      .name = "power",
++};
++
++void wake_lock_init(struct wake_lock *lock, int type, const char *name)
++{
++      unsigned long irqflags = 0;
++
++      if (name)
++              lock->name = name;
++      BUG_ON(!lock->name);
++
++      if (debug_mask & DEBUG_WAKE_LOCK)
++              pr_info("wake_lock_init name=%s\n", lock->name);
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      lock->stat.count = 0;
++      lock->stat.expire_count = 0;
++      lock->stat.wakeup_count = 0;
++      lock->stat.total_time = ktime_set(0, 0);
++      lock->stat.prevent_suspend_time = ktime_set(0, 0);
++      lock->stat.max_time = ktime_set(0, 0);
++      lock->stat.last_time = ktime_set(0, 0);
++#endif
++      lock->flags = (type & WAKE_LOCK_TYPE_MASK) | WAKE_LOCK_INITIALIZED;
++
++      INIT_LIST_HEAD(&lock->link);
++      spin_lock_irqsave(&list_lock, irqflags);
++      list_add(&lock->link, &inactive_locks);
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++EXPORT_SYMBOL(wake_lock_init);
++
++void wake_lock_destroy(struct wake_lock *lock)
++{
++      unsigned long irqflags;
++      if (debug_mask & DEBUG_WAKE_LOCK)
++              pr_info("wake_lock_destroy name=%s\n", lock->name);
++      spin_lock_irqsave(&list_lock, irqflags);
++      lock->flags &= ~WAKE_LOCK_INITIALIZED;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      if (lock->stat.count) {
++              deleted_wake_locks.stat.count += lock->stat.count;
++              deleted_wake_locks.stat.expire_count += lock->stat.expire_count;
++              deleted_wake_locks.stat.total_time =
++                      ktime_add(deleted_wake_locks.stat.total_time,
++                                lock->stat.total_time);
++              deleted_wake_locks.stat.prevent_suspend_time =
++                      ktime_add(deleted_wake_locks.stat.prevent_suspend_time,
++                                lock->stat.prevent_suspend_time);
++              deleted_wake_locks.stat.max_time =
++                      ktime_add(deleted_wake_locks.stat.max_time,
++                                lock->stat.max_time);
++      }
++#endif
++      list_del(&lock->link);
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++EXPORT_SYMBOL(wake_lock_destroy);
++
++static void wake_lock_internal(
++      struct wake_lock *lock, long timeout, int has_timeout)
++{
++      int type;
++      unsigned long irqflags;
++      long expire_in;
++
++      spin_lock_irqsave(&list_lock, irqflags);
++      type = lock->flags & WAKE_LOCK_TYPE_MASK;
++      BUG_ON(type >= WAKE_LOCK_TYPE_COUNT);
++      BUG_ON(!(lock->flags & WAKE_LOCK_INITIALIZED));
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      if (type == WAKE_LOCK_SUSPEND && wait_for_wakeup) {
++              if (debug_mask & DEBUG_WAKEUP)
++                      pr_info("wakeup wake lock: %s\n", lock->name);
++              wait_for_wakeup = 0;
++              lock->stat.wakeup_count++;
++      }
++      if ((lock->flags & WAKE_LOCK_AUTO_EXPIRE) &&
++          (long)(lock->expires - jiffies) <= 0) {
++              wake_unlock_stat_locked(lock, 0);
++              lock->stat.last_time = ktime_get();
++      }
++#endif
++      if (!(lock->flags & WAKE_LOCK_ACTIVE)) {
++              lock->flags |= WAKE_LOCK_ACTIVE;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++              lock->stat.last_time = ktime_get();
++#endif
++      }
++      list_del(&lock->link);
++      if (has_timeout) {
++              if (debug_mask & DEBUG_WAKE_LOCK)
++                      pr_info("wake_lock: %s, type %d, timeout %ld.%03lu\n",
++                              lock->name, type, timeout / HZ,
++                              (timeout % HZ) * MSEC_PER_SEC / HZ);
++              lock->expires = jiffies + timeout;
++              lock->flags |= WAKE_LOCK_AUTO_EXPIRE;
++              list_add_tail(&lock->link, &active_wake_locks[type]);
++      } else {
++              if (debug_mask & DEBUG_WAKE_LOCK)
++                      pr_info("wake_lock: %s, type %d\n", lock->name, type);
++              lock->expires = LONG_MAX;
++              lock->flags &= ~WAKE_LOCK_AUTO_EXPIRE;
++              list_add(&lock->link, &active_wake_locks[type]);
++      }
++      if (type == WAKE_LOCK_SUSPEND) {
++              current_event_num++;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++              if (lock == &main_wake_lock)
++                      update_sleep_wait_stats_locked(1);
++              else if (!wake_lock_active(&main_wake_lock))
++                      update_sleep_wait_stats_locked(0);
++#endif
++              if (has_timeout)
++                      expire_in = has_wake_lock_locked(type);
++              else
++                      expire_in = -1;
++              if (expire_in > 0) {
++                      if (debug_mask & DEBUG_EXPIRE)
++                              pr_info("wake_lock: %s, start expire timer, "
++                                      "%ld\n", lock->name, expire_in);
++                      mod_timer(&expire_timer, jiffies + expire_in);
++              } else {
++                      if (del_timer(&expire_timer))
++                              if (debug_mask & DEBUG_EXPIRE)
++                                      pr_info("wake_lock: %s, stop expire timer\n",
++                                              lock->name);
++                      if (expire_in == 0)
++                              queue_work(suspend_work_queue, &suspend_work);
++              }
++      }
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++
++void wake_lock(struct wake_lock *lock)
++{
++      wake_lock_internal(lock, 0, 0);
++}
++EXPORT_SYMBOL(wake_lock);
++
++void wake_lock_timeout(struct wake_lock *lock, long timeout)
++{
++      wake_lock_internal(lock, timeout, 1);
++}
++EXPORT_SYMBOL(wake_lock_timeout);
++
++void wake_unlock(struct wake_lock *lock)
++{
++      int type;
++      unsigned long irqflags;
++      spin_lock_irqsave(&list_lock, irqflags);
++      type = lock->flags & WAKE_LOCK_TYPE_MASK;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wake_unlock_stat_locked(lock, 0);
++#endif
++      if (debug_mask & DEBUG_WAKE_LOCK)
++              pr_info("wake_unlock: %s\n", lock->name);
++      lock->flags &= ~(WAKE_LOCK_ACTIVE | WAKE_LOCK_AUTO_EXPIRE);
++      list_del(&lock->link);
++      list_add(&lock->link, &inactive_locks);
++      if (type == WAKE_LOCK_SUSPEND) {
++              long has_lock = has_wake_lock_locked(type);
++              if (has_lock > 0) {
++                      if (debug_mask & DEBUG_EXPIRE)
++                              pr_info("wake_unlock: %s, start expire timer, "
++                                      "%ld\n", lock->name, has_lock);
++                      mod_timer(&expire_timer, jiffies + has_lock);
++              } else {
++                      if (del_timer(&expire_timer))
++                              if (debug_mask & DEBUG_EXPIRE)
++                                      pr_info("wake_unlock: %s, stop expire "
++                                              "timer\n", lock->name);
++                      if (has_lock == 0)
++                              queue_work(suspend_work_queue, &suspend_work);
++              }
++              if (lock == &main_wake_lock) {
++                      if (debug_mask & DEBUG_SUSPEND)
++                              print_active_locks(WAKE_LOCK_SUSPEND);
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++                      update_sleep_wait_stats_locked(0);
++#endif
++              }
++      }
++      spin_unlock_irqrestore(&list_lock, irqflags);
++}
++EXPORT_SYMBOL(wake_unlock);
++
++int wake_lock_active(struct wake_lock *lock)
++{
++      return !!(lock->flags & WAKE_LOCK_ACTIVE);
++}
++EXPORT_SYMBOL(wake_lock_active);
++
++static int __init wakelocks_init(void)
++{
++      int ret;
++      int i;
++
++      for (i = 0; i < ARRAY_SIZE(active_wake_locks); i++)
++              INIT_LIST_HEAD(&active_wake_locks[i]);
++
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wake_lock_init(&deleted_wake_locks, WAKE_LOCK_SUSPEND,
++                      "deleted_wake_locks");
++#endif
++      wake_lock_init(&main_wake_lock, WAKE_LOCK_SUSPEND, "main");
++      wake_lock(&main_wake_lock);
++      wake_lock_init(&unknown_wakeup, WAKE_LOCK_SUSPEND, "unknown_wakeups");
++
++      ret = platform_device_register(&power_device);
++      if (ret) {
++              pr_err("wakelocks_init: platform_device_register failed\n");
++              goto err_platform_device_register;
++      }
++      ret = platform_driver_register(&power_driver);
++      if (ret) {
++              pr_err("wakelocks_init: platform_driver_register failed\n");
++              goto err_platform_driver_register;
++      }
++
++      suspend_work_queue = create_singlethread_workqueue("suspend");
++      if (suspend_work_queue == NULL) {
++              ret = -ENOMEM;
++              goto err_suspend_work_queue;
++      }
++
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      create_proc_read_entry("wakelocks", S_IRUGO, NULL,
++                              wakelocks_read_proc, NULL);
++#endif
++
++      return 0;
++
++err_suspend_work_queue:
++      platform_driver_unregister(&power_driver);
++err_platform_driver_register:
++      platform_device_unregister(&power_device);
++err_platform_device_register:
++      wake_lock_destroy(&unknown_wakeup);
++      wake_lock_destroy(&main_wake_lock);
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wake_lock_destroy(&deleted_wake_locks);
++#endif
++      return ret;
++}
++
++static void  __exit wakelocks_exit(void)
++{
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      remove_proc_entry("wakelocks", NULL);
++#endif
++      destroy_workqueue(suspend_work_queue);
++      platform_driver_unregister(&power_driver);
++      platform_device_unregister(&power_device);
++      wake_lock_destroy(&unknown_wakeup);
++      wake_lock_destroy(&main_wake_lock);
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      wake_lock_destroy(&deleted_wake_locks);
++#endif
++}
++
++core_initcall(wakelocks_init);
++module_exit(wakelocks_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/composite.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/composite.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/composite.c       2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/composite.c    2009-05-10 22:28:00.000000000 +0200
+@@ -1046,7 +1046,11 @@
+ /*-------------------------------------------------------------------------*/
+ static struct usb_gadget_driver composite_driver = {
++#ifdef        CONFIG_USB_GADGET_DUALSPEED
+       .speed          = USB_SPEED_HIGH,
++#else
++      .speed          = USB_SPEED_FULL,
++#endif
+       .bind           = composite_bind,
+       .unbind         = __exit_p(composite_unbind),
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/epautoconf.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/epautoconf.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/epautoconf.c      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/epautoconf.c   2009-05-10 22:28:00.000000000 +0200
+@@ -275,6 +275,18 @@
+               ep = find_ep (gadget, "ep1-bulk");
+               if (ep && ep_matches (gadget, ep, desc))
+                       return ep;
++      } else if (gadget_is_s3c64xx(gadget)) {
++              if (USB_ENDPOINT_XFER_INT == type) {
++                      /* single buffering is enough */
++                      ep = find_ep(gadget, "ep3-int");
++                      if (ep && ep_matches(gadget, ep, desc))
++                              return ep;
++              } else if (USB_ENDPOINT_XFER_BULK == type
++                              && (USB_DIR_IN & desc->bEndpointAddress)) {
++                      ep = find_ep(gadget, "ep2-bulk");
++                      if (ep && ep_matches(gadget, ep, desc))
++                              return ep;
++              }
+       }
+       /* Second, look at endpoints until an unclaimed one looks usable */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/ether.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/ether.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/ether.c   2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/ether.c        2009-05-10 22:28:00.000000000 +0200
+@@ -122,11 +122,16 @@
+  * Instead:  allocate your own, using normal USB-IF procedures.
+  */
++#if 0
+ /* Thanks to NetChip Technologies for donating this product ID.
+  * It's for devices with only CDC Ethernet configurations.
+  */
+ #define CDC_VENDOR_NUM                0x0525  /* NetChip */
+ #define CDC_PRODUCT_NUM               0xa4a1  /* Linux-USB Ethernet Gadget */
++#else
++#define CDC_VENDOR_NUM        0x1457          /* First International Computer */
++#define CDC_PRODUCT_NUM       0x5117          /* Linux-USB Ethernet Gadget */
++#endif
+ /* For hardware that can't talk CDC, we use the same vendor ID that
+  * ARM Linux has used for ethernet-over-usb, both with sa1100 and
+@@ -147,8 +152,8 @@
+  * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
+  * the non-RNDIS configuration.
+  */
+-#define RNDIS_VENDOR_NUM      0x0525  /* NetChip */
+-#define RNDIS_PRODUCT_NUM     0xa4a2  /* Ethernet/RNDIS Gadget */
++#define RNDIS_VENDOR_NUM      0x1457  /* NetChip */
++#define RNDIS_PRODUCT_NUM     0x5122  /* Ethernet/RNDIS Gadget */
+ /*-------------------------------------------------------------------------*/
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/f_rndis.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/f_rndis.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/f_rndis.c 2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/f_rndis.c      2009-05-10 22:28:00.000000000 +0200
+@@ -437,7 +437,8 @@
+               DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
+                       ctrl->bRequestType, ctrl->bRequest,
+                       w_value, w_index, w_length);
+-              req->zero = 0;
++              req->zero = value < w_length
++                              && (value % cdev->gadget->ep0->maxpacket) == 0;
+               req->length = value;
+               value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+               if (value < 0)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/gadget_chips.h linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/gadget_chips.h
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/gadget_chips.h    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/gadget_chips.h 2009-05-10 22:28:00.000000000 +0200
+@@ -104,6 +104,12 @@
+ #define gadget_is_s3c2410(g)    0
+ #endif
++#ifdef CONFIG_USB_GADGET_S3C_OTGD_HS
++#define gadget_is_s3c64xx(g)    !strcmp("s3c-otg-device", (g)->name)
++#else
++#define gadget_is_s3c64xx(g)    0
++#endif
++
+ #ifdef CONFIG_USB_GADGET_AT91
+ #define gadget_is_at91(g)     !strcmp("at91_udc", (g)->name)
+ #else
+@@ -231,6 +237,8 @@
+               return 0x22;
+       else if (gadget_is_ci13xxx(gadget))
+               return 0x23;
++      else if (gadget_is_s3c64xx(gadget))
++              return 0x24;
+       return -ENOENT;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/Kconfig linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/Kconfig   2009-05-10 22:08:45.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/Kconfig        2009-05-10 22:28:00.000000000 +0200
+@@ -291,6 +291,22 @@
+       boolean "S3C2410 udc debug messages"
+       depends on USB_GADGET_S3C2410
++config USB_GADGET_S3C_OTGD_HS
++       boolean "S3C high speed(2.0, dual-speed) USB OTG device"
++       depends on (CPU_S3C6400 || CPU_S3C6410)
++       select USB_GADGET_SELECTED
++       select USB_GADGET_DUALSPEED
++       help
++               Say "y" to link the driver statically, or "m" to build a
++               dynamically linked module called "s3c_udc_hs" and force all
++               gadget drivers to also be dynamically linked.
++
++config USB_S3C
++       tristate
++       depends on USB_GADGET_S3C_FS && USB_GADGET_S3C_HS && USB_GADGET_S3C_OTGD_HS
++       default USB_GADGET
++       select USB_GADGET_SELECTED
++
+ #
+ # Controllers available in both integrated and discrete versions
+ #
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/Makefile linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/Makefile  2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/Makefile       2009-05-10 22:28:00.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_USB_ATMEL_USBA)  += atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)    += fsl_usb2_udc.o
+ obj-$(CONFIG_USB_M66592)      += m66592-udc.o
++obj-$(CONFIG_USB_GADGET_S3C_OTGD_HS)  += s3c_hs_otg.o
+ obj-$(CONFIG_USB_FSL_QE)      += fsl_qe_udc.o
+ obj-$(CONFIG_USB_CI13XXX)     += ci13xxx_udc.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c2410_udc.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c2410_udc.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c2410_udc.c     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c2410_udc.c  2009-05-10 22:28:00.000000000 +0200
+@@ -134,6 +134,8 @@
+       return 0;
+ }
+ #endif
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
+ {
+       u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
+@@ -197,6 +199,7 @@
+       .release        = single_release,
+       .owner          = THIS_MODULE,
+ };
++#endif
+ /* io macros */
+@@ -843,6 +846,7 @@
+       u32                     ep_csr1;
+       u32                     idx;
++handle_ep_again:
+       if (likely (!list_empty(&ep->queue)))
+               req = list_entry(ep->queue.next,
+                               struct s3c2410_request, queue);
+@@ -882,6 +886,8 @@
+               if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
+                       s3c2410_udc_read_fifo(ep,req);
++                      if (s3c2410_udc_fifo_count_out())
++                              goto handle_ep_again;
+               }
+       }
+ }
+@@ -1707,6 +1713,7 @@
+       if (driver->disconnect)
+               driver->disconnect(&udc->gadget);
++      driver->unbind(&udc->gadget);
+       device_del(&udc->gadget.dev);
+       udc->driver = NULL;
+@@ -1897,6 +1904,7 @@
+               udc->vbus = 1;
+       }
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+       if (s3c2410_udc_debugfs_root) {
+               udc->regs_info = debugfs_create_file("registers", S_IRUGO,
+                               s3c2410_udc_debugfs_root,
+@@ -1904,6 +1912,7 @@
+               if (!udc->regs_info)
+                       dev_warn(dev, "debugfs file creation failed\n");
+       }
++#endif
+       dev_dbg(dev, "probe ok\n");
+@@ -2013,12 +2022,14 @@
+       dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+       s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
+       if (IS_ERR(s3c2410_udc_debugfs_root)) {
+               printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
+                       gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
+               s3c2410_udc_debugfs_root = NULL;
+       }
++#endif
+       retval = platform_driver_register(&udc_driver_2410);
+       if (retval)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c_hs_otg.c linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c_hs_otg.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c_hs_otg.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c_hs_otg.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,1874 @@
++/*
++ * drivers/usb/gadget/s3c_hs_otg.c
++ * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Minkyu Kang <mk7.kang@samsung.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ */
++
++#include "s3c-udc.h"
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <mach/map.h>
++#include <plat/regs-clock.h>
++#include <plat/regs-usb-hs-otg.h>
++#include <plat/regs-sys.h>
++#include <plat/devs.h>
++
++static char *state_names[] = {
++      "WAIT_FOR_SETUP",
++      "DATA_STATE_XMIT",
++      "DATA_STATE_NEED_ZLP",
++      "WAIT_FOR_OUT_STATUS",
++      "DATA_STATE_RECV"
++};
++
++#define S3C_USB_DBG_LEVEL 0
++
++#define DBG(level, fmt, args...) do { \
++      if (level >= S3C_USB_DBG_LEVEL) { \
++              printk(KERN_INFO "[%s] " fmt, \
++                              __func__, ##args); \
++      } } while (0)
++
++
++#define       DRIVER_DESC "Samsung Dual-speed USB 2.0 OTG Device Controller"
++#define DRIVER_AUTHOR "Samsung Electronics"
++#define       DRIVER_VERSION "04 Dec 2008"
++
++
++struct s3c_udc        *the_controller;
++
++static const char driver_name[] = "s3c-otg-device";
++static const char driver_desc[] = DRIVER_DESC;
++static const char ep0name[] = "ep0-control";
++
++static u32 tx_ep_num = 2;
++
++static u32 ep0_fifo_size = EP0_FIFO_SIZE;
++static u32 ep_fifo_size =  EP_FIFO_SIZE;
++static u32 ep_fifo_size2 = EP_FIFO_SIZE2;
++
++struct usb_ctrlrequest ctrl;
++static int reset_available = 1;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FILES
++
++static const char proc_node_name[] = "driver/otg";
++
++static int
++udc_proc_read(char *page, char **start, off_t off, int count,
++            int *eof, void *_dev)
++{
++      char *buf = page;
++      struct s3c_udc *dev = _dev;
++      char *next = buf;
++      unsigned size = count;
++      unsigned long flags;
++      int t;
++
++      if (off != 0)
++              return 0;
++
++      local_irq_save(flags);
++
++      /* basic device status */
++      t = scnprintf(next, size,
++                    DRIVER_DESC "\n"
++                    "%s version: %s\n"
++                    "Gadget driver: %s\n"
++                    "\n",
++                    driver_name, DRIVER_VERSION,
++                    dev->driver ? dev->driver->driver.name : "(none)");
++      size -= t;
++      next += t;
++
++      local_irq_restore(flags);
++      *eof = 1;
++      return count - size;
++}
++
++#define create_proc_files() \
++      create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
++#define remove_proc_files() \
++      remove_proc_entry(proc_node_name, NULL)
++
++#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
++
++#define create_proc_files() do {} while (0)
++#define remove_proc_files() do {} while (0)
++
++#endif        /* CONFIG_USB_GADGET_DEBUG_FILES */
++
++
++static u32 s3c_otg_readl(struct s3c_udc *dev, u32 reg)
++{
++      return __raw_readl((u32)dev->reg_base + reg);
++}
++
++static void s3c_otg_writel(struct s3c_udc *dev, u32 val, u32 reg)
++{
++      __raw_writel(val, ((u32)dev->reg_base) + reg);
++}
++
++static void s3c_otg_orl(struct s3c_udc *dev, u32 val, u32 reg)
++{
++      u32 temp = __raw_readl(((u32)dev->reg_base) + reg);
++
++      __raw_writel(val|temp, ((u32)dev->reg_base) + reg);
++}
++
++/*
++ *    retire a request
++ */
++static void s3c_otg_done(struct s3c_ep *ep, struct s3c_request *req, int status)
++{
++      unsigned int stopped = ep->stopped;
++
++      DBG(1, "%s %p, stopped = %d\n", ep->ep.name, ep, stopped);
++      list_del_init(&req->queue);
++
++      if (req->req.status == -EINPROGRESS)
++              req->req.status = status;
++      else
++              status = req->req.status;
++
++      if (status && (status != -ESHUTDOWN))
++              DBG(2, "complete %s stat %d len %u/%u\n",
++                      ep->ep.name, status, req->req.actual, req->req.length);
++
++      /* don't modify queue heads during completion callback */
++      ep->stopped = 1;
++
++      spin_unlock(&ep->dev->lock);
++      req->req.complete(&ep->ep, &req->req);
++      spin_lock(&ep->dev->lock);
++
++      ep->stopped = stopped;
++}
++
++/*
++ *    dequeue ALL requests
++ */
++void s3c_otg_nuke(struct s3c_ep *ep, int status)
++{
++      struct s3c_request *req;
++
++      DBG(1, "%s %p\n", ep->ep.name, ep);
++
++      /* called with irqs blocked */
++      while (!list_empty(&ep->queue)) {
++              req = list_entry(ep->queue.next, struct s3c_request, queue);
++              s3c_otg_done(ep, req, status);
++      }
++}
++
++static void s3c_otg_ep_control(int ep, int dir, u32 val, int update)
++{
++      u32 epctrl;
++
++      switch (ep) {
++      case 0:
++              if (dir)
++                      epctrl = (u32)S3C_UDC_OTG_DIEPCTL0;
++              else
++                      epctrl = (u32)S3C_UDC_OTG_DOEPCTL0;
++              break;
++      case 1:
++              if (dir)
++                      epctrl = -EOPNOTSUPP;
++              else
++                      epctrl = (u32)S3C_UDC_OTG_DOEPCTL1;
++              break;
++      case 2:
++              if (dir)
++                      epctrl = (u32)S3C_UDC_OTG_DIEPCTL2;
++              else
++                      epctrl = -EOPNOTSUPP;
++              break;
++      case 3:
++              if (dir)
++                      epctrl = (u32)S3C_UDC_OTG_DIEPCTL3;
++              else
++                      epctrl = -EOPNOTSUPP;
++              break;
++      default:
++              DBG(3, "ep%d is unused Endpoint", ep);
++              return;
++      }
++
++      if (epctrl < 0) {
++              DBG(3, "ep%d - %s is invalid direction\n",
++                              ep, dir ? "IN" : "OUT");
++              return;
++      }
++
++      if (update)
++              s3c_otg_orl(the_controller, val, epctrl);
++      else
++              s3c_otg_writel(the_controller, val, epctrl);
++}
++
++static int s3c_otg_write_packet(struct s3c_ep *ep,
++              struct s3c_request *req, int max)
++{
++      u32 *buf;
++      int length;
++      int count;
++      u32 fifo = ep->fifo;
++      u32 epsize;
++
++      buf = req->req.buf + req->req.actual;
++      prefetch(buf);
++
++      length = req->req.length - req->req.actual;
++      length = min(length, max);
++      req->req.actual += length;
++
++      DBG(1, "%s: %d/%d, fifo=0x%x\n", ep->ep.name, length, max, fifo);
++
++      switch (ep_index(ep)) {
++      case 0:
++              epsize = (u32)S3C_UDC_OTG_DIEPTSIZ0;
++              break;
++      case 2:
++              epsize = (u32)S3C_UDC_OTG_DIEPTSIZ2;
++              break;
++      case 3:
++              epsize = (u32)S3C_UDC_OTG_DIEPTSIZ3;
++              break;
++      default:
++              DBG(3, "ep%d is unused Endpoint", ep_index(ep));
++              return 0;
++      }
++
++      s3c_otg_writel(ep->dev, PKT_CNT(0x1)|XFERSIZE(length), epsize);
++      s3c_otg_ep_control(ep_index(ep), USB_DIR_IN,
++                      DEPCTL_EPENA|DEPCTL_CNAK, 1);
++
++      for (count = 0; count < length; count += 4)
++              s3c_otg_writel(ep->dev, *buf++, fifo);
++
++      return length;
++}
++
++static int s3c_otg_write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
++{
++      u32 max;
++      unsigned count;
++      int is_last;
++
++      max = ep_maxpacket(ep);
++      count = s3c_otg_write_packet(ep, req, max);
++
++      /* last packet is usually short (or a zlp) */
++      if (count != max) {
++              is_last = 1;
++      } else {
++              if ((req->req.length != req->req.actual) || req->req.zero)
++                      is_last = 0;
++              else
++                      is_last = 1;
++      }
++
++      DBG(2, "wrote %s %d bytes%s %d left %p\n",
++                      ep->ep.name, count,     is_last ? "/L" : "",
++                      req->req.length - req->req.actual, req);
++
++      /* requests complete when all IN data is in the FIFO */
++      return is_last;
++}
++
++static int s3c_otg_read_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
++{
++      u32 csr;
++      u32 *buf;
++      unsigned bufferspace;
++      unsigned count;
++      unsigned is_short;
++      unsigned bytes;
++      u32 fifo = ep->fifo;
++
++      csr = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GRXSTSP);
++      bytes = BYTE_COUNT(csr);
++
++      buf = req->req.buf + req->req.actual;
++      prefetchw(buf);
++      bufferspace = req->req.length - req->req.actual;
++
++      /* read all bytes from this packet */
++      if (EP_NUM(csr) == 0) {
++              count = bytes / 4 + (bytes % 4 ? 1 : 0);
++              req->req.actual += min(bytes, bufferspace);
++      } else {
++              count = 0;
++              bytes = 0;
++      }
++
++      is_short = (bytes < ep->ep.maxpacket);
++
++      DBG(2, "read %s %d bytes%s %d/%d\n",
++                ep->ep.name, bytes, is_short ? "/S" : "",
++                req->req.actual, req->req.length);
++
++      while (count--) {
++              u32 byte = s3c_otg_readl(ep->dev, fifo);
++
++              if (unlikely(bufferspace == 0)) {
++                      /* this happens when the driver's buffer
++                       * is smaller than what the host sent.
++                       * discard the extra data.
++                       */
++                      if (req->req.status != -EOVERFLOW)
++                              DBG(3, "%s overflow %d\n", ep->ep.name, count);
++                      req->req.status = -EOVERFLOW;
++              } else {
++                      *buf++ = byte;
++                      bufferspace -= 4;
++              }
++      }
++
++      /* completion */
++      if (is_short || req->req.actual == req->req.length)
++              return 1;
++
++      return 0;
++}
++
++static int s3c_otg_write_ep0(struct s3c_udc *dev)
++{
++      struct s3c_request *req;
++      struct s3c_ep *ep = &dev->ep[0];
++      int ret;
++      int need_zlp = 0;
++
++      if (list_empty(&ep->queue))
++              req = NULL;
++      else
++              req = list_entry(ep->queue.next, struct s3c_request, queue);
++
++      if (!req) {
++              DBG(2, "NULL REQ\n");
++              return 0;
++      }
++
++      DBG(2, "length = 0x%x, actual = 0x%x\n",
++                      req->req.length, req->req.actual);
++
++      if (req->req.length == 0) {
++              dev->ep0state = WAIT_FOR_SETUP;
++              s3c_otg_done(ep, req, 0);
++              return 1;
++      }
++
++      /* Next write will end with the packet size, */
++      /* so we need Zero-length-packet */
++      if (req->req.length - req->req.actual == ep0_fifo_size)
++              need_zlp = 1;
++
++      ret = s3c_otg_write_fifo_ep0(ep, req);
++
++      if ((ret == 1) && !need_zlp) {
++              /* Last packet */
++              DBG(1, "finished, waiting for status\n");
++              dev->ep0state = WAIT_FOR_SETUP;
++      }
++
++      if (need_zlp) {
++              DBG(1, "Need ZLP!\n");
++              dev->ep0state = DATA_STATE_NEED_ZLP;
++      }
++
++      if (ret)
++              s3c_otg_done(ep, req, 0);
++
++      return ret;
++}
++
++static int first_time = 1;
++
++static int s3c_otg_read_ep0(struct s3c_udc *dev)
++{
++      struct s3c_request *req;
++      struct s3c_ep *ep = &dev->ep[0];
++      int ret;
++
++      if (!list_empty(&ep->queue))
++              req = list_entry(ep->queue.next, struct s3c_request, queue);
++      else {
++              DBG(3, "---> BUG\n");
++              BUG();
++              return 0;
++      }
++
++      DBG(2, "length = 0x%x, actual = 0x%x\n",
++                      req->req.length, req->req.actual);
++
++      if (req->req.length == 0) {
++              dev->ep0state = WAIT_FOR_SETUP;
++              first_time = 1;
++              s3c_otg_done(ep, req, 0);
++              return 1;
++      }
++
++      if (!req->req.actual && first_time) {
++              first_time = 0;
++              return 1;
++      }
++
++      ret = s3c_otg_read_fifo_ep0(ep, req);
++
++      if (ret)
++              s3c_otg_done(ep, req, 0);
++
++      dev->ep0state = WAIT_FOR_SETUP;
++      first_time = 1;
++
++      return ret;
++}
++
++static void s3c_otg_kick_ep0(struct s3c_udc *dev, struct s3c_ep *ep)
++{
++      int res = 0;
++
++      DBG(1, "ep_is_in = %d\n", ep_is_in(ep));
++
++      if (ep_is_in(ep)) {
++              dev->ep0state = DATA_STATE_XMIT;
++              while (!res)
++                      res = s3c_otg_write_ep0(dev);
++      } else {
++              dev->ep0state = DATA_STATE_RECV;
++              s3c_otg_read_ep0(dev);
++      }
++}
++
++/*
++ * Write request to FIFO
++ */
++static int s3c_otg_write_fifo(struct s3c_ep *ep, struct s3c_request *req)
++{
++      u32 max;
++      u32 gintmsk;
++      unsigned count;
++      int is_last = 0;
++      int is_short = 0;
++
++      gintmsk = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GINTMSK);
++
++      max = le16_to_cpu(ep->desc->wMaxPacketSize);
++      count = s3c_otg_write_packet(ep, req, max);
++
++      /* last packet is usually short (or a zlp) */
++      if (count != max) {
++              is_last = 1;
++              is_short = 1;
++      } else {
++              if ((req->req.length != req->req.actual) || req->req.zero)
++                      is_last = 0;
++              else
++                      is_last = 1;
++
++              /* interrupt/iso maxpacket may not fill the fifo */
++              is_short = (max < ep_maxpacket(ep));
++      }
++
++      DBG(2, "wrote %s %d bytes%s%s %d/%d\n",
++                      ep->ep.name, count,
++                      is_last ? "/L" : "", is_short ? "/S" : "",
++                      req->req.actual, req->req.length);
++
++      /* requests complete when all IN data is in the FIFO */
++      if (is_last) {
++              if (ep_index(ep) == 0) {
++                      DBG(3, "--> EP0 must not come here!\n");
++                      BUG();
++              }
++
++              s3c_otg_writel(ep->dev, gintmsk & (~INT_TX_FIFO_EMPTY),
++                              (u32)S3C_UDC_OTG_GINTMSK);
++              s3c_otg_done(ep, req, 0);
++
++              return 1;
++      }
++
++      s3c_otg_writel(ep->dev, gintmsk|INT_TX_FIFO_EMPTY,
++                      (u32)S3C_UDC_OTG_GINTMSK);
++
++      return 0;
++}
++
++/*
++ * Read to request from FIFO (max read == bytes in fifo)
++ */
++static int s3c_otg_read_fifo(struct s3c_ep *ep, struct s3c_request *req)
++{
++      u32 csr;
++      u32 gintmsk;
++      u32 *buf;
++      unsigned bufferspace;
++      unsigned count;
++      unsigned is_short = 0;
++      unsigned bytes;
++      u32 fifo = ep->fifo;
++
++      csr = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GRXSTSP);
++      bytes = BYTE_COUNT(csr);
++      gintmsk = readl(S3C_UDC_OTG_GINTMSK);
++
++      if (!bytes) {
++              DBG(2, "%d bytes\n", bytes);
++              s3c_otg_orl(ep->dev, INT_RX_FIFO_NOT_EMPTY,
++                              (u32)S3C_UDC_OTG_GINTMSK);
++              return 0;
++      }
++
++      buf = req->req.buf + req->req.actual;
++      prefetchw(buf);
++      bufferspace = req->req.length - req->req.actual;
++
++      count = bytes / 4 + (bytes % 4 ? 1 : 0);
++      req->req.actual += min(bytes, bufferspace);
++
++      is_short = (bytes < ep->ep.maxpacket);
++
++      DBG(2, "read %s %d bytes%s %d/%d\n",
++                      ep->ep.name, bytes, is_short ? "/S" : "",
++                      req->req.actual, req->req.length);
++
++      while (count--) {
++              u32 byte = s3c_otg_readl(ep->dev, fifo);
++
++              if (unlikely(bufferspace == 0)) {
++                      /* this happens when the driver's buffer
++                       * is smaller than what the host sent.
++                       * discard the extra data.
++                       */
++                      if (req->req.status != -EOVERFLOW)
++                              DBG(3, "%s overflow %d\n", ep->ep.name, count);
++                      req->req.status = -EOVERFLOW;
++              } else {
++                      *buf++ = byte;
++                      bufferspace -= 4;
++              }
++      }
++
++      s3c_otg_writel(ep->dev, gintmsk|INT_RX_FIFO_NOT_EMPTY,
++                      (u32)S3C_UDC_OTG_GINTMSK);
++
++      /* completion */
++      if (is_short || req->req.actual == req->req.length) {
++              s3c_otg_done(ep, req, 0);
++              return 1;
++      }
++
++      /* finished that packet.  the next one may be waiting... */
++      return 0;
++}
++
++static struct usb_request *s3c_otg_alloc_request(
++              struct usb_ep *ep, gfp_t gfp_flags)
++{
++      struct s3c_request *req;
++
++      if (!ep)
++              return NULL;
++
++      DBG(1, "%s %p\n", ep->name, ep);
++
++      req = kzalloc(sizeof *req, gfp_flags);
++      if (!req)
++              return NULL;
++
++      INIT_LIST_HEAD(&req->queue);
++
++      return &req->req;
++}
++
++static void s3c_otg_free_request(struct usb_ep *ep, struct usb_request *_req)
++{
++      struct s3c_request *req;
++
++      if (!ep)
++              return;
++
++      DBG(1, "%s %p\n", ep->name, ep);
++
++      if (!_req)
++              return;
++
++      req = container_of(_req, struct s3c_request, req);
++
++      WARN_ON(!list_empty(&req->queue));
++      kfree(req);
++}
++
++/*
++ * Queue one request
++ *  Kickstart transfer if needed
++ */
++static int s3c_otg_queue(struct usb_ep *_ep,
++              struct usb_request *_req, gfp_t gfp_flags)
++{
++      struct s3c_request *req;
++      struct s3c_ep *ep;
++      struct s3c_udc *dev;
++      unsigned long flags;
++      u32 csr;
++
++      req = container_of(_req, struct s3c_request, req);
++      if (!_req || !_req->complete || !_req->buf
++                      || !list_empty(&req->queue)) {
++              DBG(3, "bad params\n");
++              return -EINVAL;
++      }
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (!_ep || (!ep->desc && ep->ep.name != ep0name)) {
++              DBG(3, "bad ep\n");
++              return -EINVAL;
++      }
++
++      dev = ep->dev;
++      if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
++              DBG(3, "bogus device state %p\n", dev->driver);
++              return -ESHUTDOWN;
++      }
++
++      DBG(2, "%s queue req %p, len %d buf %p\n",
++                      _ep->name, _req, _req->length, _req->buf);
++
++      spin_lock_irqsave(&dev->lock, flags);
++
++      _req->status = -EINPROGRESS;
++      _req->actual = 0;
++
++      DBG(2, "ep=%d, Q empty=%d, stopped=%d\n",
++                      ep_index(ep), list_empty(&ep->queue), ep->stopped);
++
++      /* kickstart this i/o queue? */
++      if (list_empty(&ep->queue) && !ep->stopped) {
++              if (ep_index(ep) == 0) {
++                      list_add_tail(&req->queue, &ep->queue);
++                      s3c_otg_kick_ep0(dev, ep);
++                      req = NULL;
++              } else if (ep_is_in(ep)) {
++                      csr = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GINTSTS);
++
++                      if ((csr & INT_TX_FIFO_EMPTY) &&
++                         (s3c_otg_write_fifo(ep, req) == 1))
++                              req = NULL;
++                      else
++                              tx_ep_num = ep_index(ep);
++              } else {
++                      csr = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GINTSTS);
++
++                      if ((csr & INT_RX_FIFO_NOT_EMPTY) &&
++                         (s3c_otg_read_fifo(ep, req) == 1))
++                              req = NULL;
++              }
++      }
++
++      /* pio or dma irq handler advances the queue. */
++      if (req)
++              list_add_tail(&req->queue, &ep->queue);
++
++      spin_unlock_irqrestore(&dev->lock, flags);
++
++      return 0;
++}
++
++/*
++ * dequeue JUST ONE request
++ */
++static int s3c_otg_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++      struct s3c_ep *ep;
++      struct s3c_request *req;
++      unsigned long flags;
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (!_ep || ep->ep.name == ep0name)
++              return -EINVAL;
++
++      spin_lock_irqsave(&ep->dev->lock, flags);
++
++      /* make sure it's actually queued on this endpoint */
++      list_for_each_entry(req, &ep->queue, queue) {
++              if (&req->req == _req)
++                      break;
++      }
++
++      if (&req->req != _req) {
++              spin_unlock_irqrestore(&ep->dev->lock, flags);
++              return -EINVAL;
++      }
++
++      s3c_otg_done(ep, req, -ECONNRESET);
++
++      spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++      return 0;
++}
++
++static int s3c_otg_set_halt(struct usb_ep *_ep, int value)
++{
++      return 0;
++}
++
++static int s3c_otg_fifo_status(struct usb_ep *_ep)
++{
++      int count = 0;
++      struct s3c_ep *ep;
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (!_ep) {
++              DBG(3, "bad ep\n");
++              return -ENODEV;
++      }
++
++      /* LPD can't report unclaimed bytes from IN fifos */
++      if (ep_is_in(ep))
++              return -EOPNOTSUPP;
++
++      return count;
++}
++
++static void s3c_otg_fifo_flush(struct usb_ep *_ep)
++{
++      struct s3c_ep *ep;
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
++              DBG(3, "bad ep\n");
++              return;
++      }
++}
++
++static int s3c_otg_ep_enable(struct usb_ep *_ep,
++              const struct usb_endpoint_descriptor *desc)
++{
++      struct s3c_ep *ep;
++      struct s3c_udc *dev;
++      unsigned long flags;
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (!_ep || !desc || ep->desc || _ep->name == ep0name
++          || desc->bDescriptorType != USB_DT_ENDPOINT
++          || ep->bEndpointAddress != desc->bEndpointAddress
++          || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
++              DBG(3, "bad ep or descriptor\n");
++              return -EINVAL;
++      }
++
++      /* xfer types must match, except that interrupt ~= bulk */
++      if (ep->bmAttributes != desc->bmAttributes
++                      && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
++                      && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
++              DBG(3, "%s type mismatch\n", _ep->name);
++              return -EINVAL;
++      }
++
++      /* hardware _could_ do smaller, but driver doesn't */
++      if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
++                      && le16_to_cpu(desc->wMaxPacketSize)
++                      != ep_maxpacket(ep))
++                      || !desc->wMaxPacketSize) {
++              DBG(3, "bad %s maxpacket\n", _ep->name);
++              return -ERANGE;
++      }
++
++      dev = ep->dev;
++      if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
++              DBG(3, "bogus device state\n");
++              return -ESHUTDOWN;
++      }
++
++      spin_lock_irqsave(&ep->dev->lock, flags);
++
++      ep->stopped = 0;
++      ep->desc = desc;
++      ep->pio_irqs = 0;
++      ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
++
++      /* Reset halt state */
++      s3c_otg_set_halt(_ep, 0);
++
++      spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++      DBG(2, "enabled %s, stopped = %d, maxpacket = %d\n",
++              _ep->name, ep->stopped, ep->ep.maxpacket);
++      return 0;
++}
++
++static int s3c_otg_ep_disable(struct usb_ep *_ep)
++{
++      struct s3c_ep *ep;
++      unsigned long flags;
++
++      ep = container_of(_ep, struct s3c_ep, ep);
++      if (!_ep || !ep->desc) {
++              DBG(3, "%s not enabled\n", _ep ? ep->ep.name : NULL);
++              return -EINVAL;
++      }
++
++      spin_lock_irqsave(&ep->dev->lock, flags);
++
++      /* Nuke all pending requests */
++      s3c_otg_nuke(ep, -ESHUTDOWN);
++
++      ep->desc = 0;
++      ep->stopped = 1;
++
++      spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++      DBG(2, "disabled %s\n", _ep->name);
++      return 0;
++}
++
++static struct usb_ep_ops s3c_ep_ops = {
++      .enable = s3c_otg_ep_enable,
++      .disable = s3c_otg_ep_disable,
++
++      .alloc_request = s3c_otg_alloc_request,
++      .free_request = s3c_otg_free_request,
++
++      .queue = s3c_otg_queue,
++      .dequeue = s3c_otg_dequeue,
++
++      .set_halt = s3c_otg_set_halt,
++      .fifo_status = s3c_otg_fifo_status,
++      .fifo_flush = s3c_otg_fifo_flush,
++};
++
++void s3c_otg_set_ep(struct s3c_udc *dev, enum usb_device_speed speed)
++{
++      u32 ep0_mps = DEPCTL0_MPS_64;
++
++      if (speed == USB_SPEED_FULL) {
++              ep0_fifo_size = 8;
++              ep_fifo_size = 64;
++              ep_fifo_size2 = 64;
++
++              ep0_mps = DEPCTL0_MPS_8;
++      }
++
++      dev->gadget.speed = speed;
++
++      dev->ep[0].ep.maxpacket = ep0_fifo_size;
++      dev->ep[1].ep.maxpacket = ep_fifo_size;
++      dev->ep[2].ep.maxpacket = ep_fifo_size;
++      dev->ep[3].ep.maxpacket = ep_fifo_size;
++      dev->ep[4].ep.maxpacket = ep_fifo_size;
++      dev->ep[5].ep.maxpacket = ep_fifo_size2;
++      dev->ep[6].ep.maxpacket = ep_fifo_size2;
++      dev->ep[7].ep.maxpacket = ep_fifo_size2;
++      dev->ep[8].ep.maxpacket = ep_fifo_size2;
++
++      /* EP0 - Control */
++      s3c_otg_ep_control(0, USB_DIR_OUT, ep0_mps, 1);
++      s3c_otg_ep_control(0, USB_DIR_IN, ep0_mps, 1);
++
++      /* EP1 - Bulk Data OUT */
++      s3c_otg_ep_control(1, USB_DIR_OUT, ep_fifo_size, 1);
++
++      /* EP2 - Bulk Data IN */
++      s3c_otg_ep_control(2, USB_DIR_IN, ep_fifo_size, 1);
++
++      /* EP3 - INTR Data IN */
++      s3c_otg_ep_control(3, USB_DIR_IN, ep_fifo_size, 1);
++
++      DBG(2, "%s Speed Detection\n",
++                      speed == USB_SPEED_HIGH ? "High" : "Full");
++}
++
++/*
++ * set the USB address for this device
++ *
++ * Called from control endpoint function
++ * after it decodes a set address setup packet.
++ */
++static void s3c_otg_set_address(struct s3c_udc *dev, unsigned char addr)
++{
++      s3c_otg_orl(dev, DEVICE_ADDR(addr), S3C_UDC_OTG_DCFG);
++      s3c_otg_ep_control(0, USB_DIR_IN, DEPCTL_EPENA|DEPCTL_CNAK, 1);
++
++      DBG(2, "USB OTG 2.0 Device Address=%d\n", addr);
++
++      dev->usb_address = addr;
++}
++
++static inline int s3c_otg_read_setup(struct s3c_ep *ep, u32 *ctrl, int max)
++{
++      int bytes;
++      int count;
++      u32 csr = s3c_otg_readl(ep->dev, S3C_UDC_OTG_GRXSTSP);
++
++      bytes = BYTE_COUNT(csr);
++
++      /* 32 bits interface */
++      count = bytes / 4;
++
++      while (count--)
++              *ctrl++ = s3c_otg_readl(ep->dev, S3C_UDC_OTG_EP0_FIFO);
++
++      return bytes;
++}
++
++static void s3c_otg_setup(struct s3c_udc *dev)
++{
++      struct s3c_ep *ep = &dev->ep[0];
++      int bytes;
++      int is_in;
++      int ret;
++
++      /* Nuke all previous transfers */
++      s3c_otg_nuke(ep, -EPROTO);
++
++      /* read control req from fifo (8 bytes) */
++      bytes = s3c_otg_read_setup(ep, (u32 *)&ctrl, 8);
++
++      DBG(2, "SETUP REQ %02x %02x %04x %04x %d\n",
++                      ctrl.bRequestType, ctrl.bRequest,
++                      ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++      /* Set direction of EP0 */
++      if (ctrl.bRequestType & USB_DIR_IN) {
++              ep->bEndpointAddress |= USB_DIR_IN;
++              is_in = 1;
++      } else {
++              ep->bEndpointAddress &= ~USB_DIR_IN;
++              is_in = 0;
++      }
++
++      dev->req_pending = 1;
++
++      /* Handle some SETUP packets ourselves */
++      switch (ctrl.bRequest) {
++      case USB_REQ_SET_ADDRESS:
++              if (ctrl.bRequestType != (USB_TYPE_STANDARD|USB_RECIP_DEVICE))
++                      break;
++
++              s3c_otg_set_address(dev, ctrl.wValue);
++              return;
++
++      case USB_REQ_SET_INTERFACE:
++              DBG(2, "USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
++              /* FALLTHROUGH */
++
++      case USB_REQ_SET_CONFIGURATION:
++              DBG(2, "USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
++
++              s3c_otg_ep_control(0, USB_DIR_IN,
++                              DEPCTL_EPENA|DEPCTL_CNAK, 1);
++              s3c_otg_ep_control(1, USB_DIR_OUT,
++                              DEPCTL_EPDIS|DEPCTL_CNAK|
++                              DEPCTL_BULK_TYPE|DEPCTL_USBACTEP, 1);
++              s3c_otg_ep_control(2, USB_DIR_IN,
++                              DEPCTL_BULK_TYPE|DEPCTL_USBACTEP, 1);
++              s3c_otg_ep_control(3, USB_DIR_IN,
++                              DEPCTL_BULK_TYPE|DEPCTL_USBACTEP, 1);
++
++              reset_available = 1;
++              dev->req_config = 1;
++              break;
++
++      case USB_REQ_GET_DESCRIPTOR:
++              DBG(2, "USB_REQ_GET_DESCRIPTOR\n");
++              break;
++
++      case USB_REQ_GET_CONFIGURATION:
++              DBG(2, "USB_REQ_GET_CONFIGURATION\n");
++              break;
++
++      case USB_REQ_GET_STATUS:
++              DBG(2, "USB_REQ_GET_STATUS\n");
++              s3c_otg_ep_control(0, USB_DIR_IN, DEPCTL_EPENA|DEPCTL_CNAK, 1);
++              break;
++
++      case USB_REQ_CLEAR_FEATURE:
++              DBG(2, "USB_REQ_CLEAR_FEATURE\n");
++              break;
++
++      case USB_REQ_SET_FEATURE:
++              DBG(2, "USB_REQ_SET_FEATURE\n");
++              break;
++
++      default:
++              DBG(3, "Default of ctrl.bRequest=0x%x\n", ctrl.bRequest);
++              break;
++      }
++
++      if (dev->driver) {
++              /* device-2-host (IN) or no data setup command,
++               * process immediately */
++              spin_unlock(&dev->lock);
++
++              DBG(1, "usb_ctrlrequest will be passed to fsg_setup()\n");
++
++              ret = dev->driver->setup(&dev->gadget, &ctrl);
++              spin_lock(&dev->lock);
++
++              if (ret < 0) {
++                      /* setup processing failed, force stall */
++                      DBG(3, "gadget setup FAILED (stalling) - %d\n", ret);
++                      dev->ep0state = WAIT_FOR_SETUP;
++              }
++      }
++}
++
++/*
++ * handle ep0 interrupt
++ */
++static void s3c_otg_handle_ep0(struct s3c_udc *dev)
++{
++      if (dev->ep0state == WAIT_FOR_SETUP)
++              s3c_otg_setup(dev);
++      else
++              DBG(3, "strange state!! - %s\n", state_names[dev->ep0state]);
++}
++
++static void s3c_otg_handle_ep_out(struct s3c_udc *dev, u32 ep_num)
++{
++      struct s3c_ep *ep = &dev->ep[ep_num];
++      struct s3c_request *req;
++
++      if (unlikely(!(ep->desc))) {
++              /* Throw packet away.. */
++              DBG(3, "No descriptor?!?\n");
++              return;
++      }
++
++      if (list_empty(&ep->queue))
++              req = 0;
++      else
++              req = list_entry(ep->queue.next, struct s3c_request, queue);
++
++      if (unlikely(!req))
++              DBG(2, "NULL REQ on OUT EP-%d\n", ep_num);
++      else
++              s3c_otg_read_fifo(ep, req);
++}
++
++static void s3c_otg_handle_ep_in(struct s3c_udc *dev, u32 ep_num)
++{
++      struct s3c_ep *ep = &dev->ep[ep_num];
++      struct s3c_request *req;
++
++      if (list_empty(&ep->queue))
++              req = 0;
++      else
++              req = list_entry(ep->queue.next, struct s3c_request, queue);
++
++      if (unlikely(!req)) {
++              DBG(2, "NULL REQ on IN EP-%d\n", ep_num);
++              return;
++      } else
++              s3c_otg_write_fifo(ep, req);
++}
++
++static void s3c_otg_handle_ep(struct s3c_udc *dev, u32 gintmsk)
++{
++      u32 csr;
++      u32 packet_status;
++      u32 ep_num;
++      u32 bytes = 0;
++
++      gintmsk &= ~INT_RX_FIFO_NOT_EMPTY;
++      s3c_otg_writel(dev, gintmsk, S3C_UDC_OTG_GINTMSK);
++
++      csr = s3c_otg_readl(dev, S3C_UDC_OTG_GRXSTSR);
++
++      packet_status = PKT_STS(csr);
++      bytes = BYTE_COUNT(csr);
++      ep_num = EP_NUM(csr);
++
++      switch (packet_status) {
++      case SETUP_PKT_RECEIVED:
++              DBG(2, "SETUP received : %d bytes\n", bytes);
++              if (!bytes)
++                      break;
++
++              s3c_otg_handle_ep0(dev);
++              gintmsk |= INT_RX_FIFO_NOT_EMPTY;
++              break;
++
++      case OUT_PKT_RECEIVED:
++              if (!bytes)
++                      break;
++
++              if (ep_num == 0) {
++                      DBG(2, "CONTROL OUT received : %d bytes\n", bytes);
++
++                      dev->ep0state = DATA_STATE_RECV;
++                      s3c_otg_read_ep0(dev);
++
++                      gintmsk |= INT_RX_FIFO_NOT_EMPTY;
++              } else if (ep_num == 1) {
++                      DBG(2, " Bulk OUT received : %d bytes\n", bytes);
++
++                      s3c_otg_handle_ep_out(dev, 1);
++                      gintmsk = s3c_otg_readl(dev,S3C_UDC_OTG_GINTMSK);
++
++                      s3c_otg_ep_control(1, USB_DIR_OUT, DEPCTL_CNAK, 1);
++              } else
++                      DBG(2, "Unused EP%d: %d bytes\n", ep_num, bytes);
++              break;
++
++      case SETUP_COMPLETED:
++              DBG(2, "SETUP_COMPLETED\n");
++              s3c_otg_ep_control(0, USB_DIR_OUT, DEPCTL_CNAK, 1);
++              break;
++
++      case OUT_COMPLELTED:
++              DBG(2, "OUT_COMPLELTED - ep%d\n", ep_num);
++              s3c_otg_ep_control(ep_num, USB_DIR_OUT, DEPCTL_CNAK, 1);
++              break;
++
++      default:
++              gintmsk |= INT_RX_FIFO_NOT_EMPTY;
++              s3c_otg_ep_control(0, USB_DIR_OUT, DEPCTL_CNAK, 1);
++              DBG(1, "reserved packet received : scr=0x%08X bytes\n", csr);
++              break;
++      }
++
++      if (!bytes) {
++              csr = s3c_otg_readl(dev, S3C_UDC_OTG_GRXSTSP);
++              gintmsk |= INT_RX_FIFO_NOT_EMPTY;
++      }
++
++      s3c_otg_writel(dev, gintmsk, S3C_UDC_OTG_GINTMSK);
++}
++
++/*
++ * disable USB device controller
++ */
++static void s3c_otg_disable(struct s3c_udc *dev)
++{
++      s3c_otg_set_address(dev, 0);
++
++      dev->ep0state = WAIT_FOR_SETUP;
++      dev->gadget.speed = USB_SPEED_UNKNOWN;
++      dev->usb_address = 0;
++
++      s3c_otg_orl(dev, ANALOG_PWR_DOWN, S3C_USBOTG_PHYPWR);
++}
++
++/*
++ * initialize software state
++ */
++static void s3c_otg_reinit(struct s3c_udc *dev)
++{
++      u32 i;
++
++      /* device/ep0 records init */
++      INIT_LIST_HEAD(&dev->gadget.ep_list);
++      INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
++      dev->ep0state = WAIT_FOR_SETUP;
++
++      /* basic endpoint records init */
++      for (i = 0; i < S3C_MAX_ENDPOINTS; i++) {
++              struct s3c_ep *ep = &dev->ep[i];
++
++              if (i != 0)
++                      list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
++
++              ep->desc = 0;
++              ep->stopped = 0;
++              INIT_LIST_HEAD(&ep->queue);
++              ep->pio_irqs = 0;
++      }
++}
++
++#define GUSBCFG_INIT  (PHY_CLK_480M|TXFIFO_RE_EN| \
++              TURN_AROUND|HNP_DISABLE|SRP_DISABLE|ULPI_DDR| \
++              HS_UTMI|INTERF_UTMI|PHY_INTERF_16|TIME_OUT_CAL)
++
++#define GINTMSK_INIT  (INT_RESUME|INT_ENUMDONE| \
++              INT_RESET|INT_SUSPEND|INT_RX_FIFO_NOT_EMPTY)
++
++#define DOEPMSK_INIT  (AHB_ERROR)
++
++#define DIEPMSK_INIT  (IN_EP_TIMEOUT|AHB_ERROR)
++
++#define GAHBCFG_INIT  (PTXFE_HALF|NPTXFE_HALF| \
++              MODE_SLAVE|BURST_INCR16|GBL_INT_UNMASK)
++
++static void s3c_otg_config(struct s3c_udc *dev)
++{
++      u32 reg;
++
++      /* OTG USB configuration */
++      s3c_otg_writel(dev, GUSBCFG_INIT, S3C_UDC_OTG_GUSBCFG);
++
++      /* Soft-reset OTG Core and then unreset again */
++      s3c_otg_writel(dev, CORE_SOFT_RESET, S3C_UDC_OTG_GRSTCTL);
++
++      /* Put the OTG device core in the disconnected state */
++      s3c_otg_orl(dev, SOFT_DISCONNECT, S3C_UDC_OTG_DCTL);
++
++      udelay(20);
++
++      /* Make the OTG device core exit from the disconnected state */
++      reg = s3c_otg_readl(dev, S3C_UDC_OTG_DCTL);
++      s3c_otg_writel(dev, reg & ~SOFT_DISCONNECT, S3C_UDC_OTG_DCTL);
++
++      /* Configure OTG Core to initial settings of device mode */
++      s3c_otg_orl(dev, EP_MIS_CNT(0x1)|SPEED_2_HIGH, S3C_UDC_OTG_DCFG);
++
++      udelay(1000);
++
++      /* Unmask the core interrupts */
++      s3c_otg_writel(dev, GINTMSK_INIT, S3C_UDC_OTG_GINTMSK);
++
++      /* Set NAK bit of EP0, EP1, EP2 */
++      s3c_otg_ep_control(0, USB_DIR_OUT,
++                      DEPCTL_EPDIS|DEPCTL_SNAK|DEPCTL0_MPS_64, 0);
++      s3c_otg_ep_control(0, USB_DIR_IN,
++                      DEPCTL_EPDIS|DEPCTL_SNAK|DEPCTL0_MPS_64, 0);
++      s3c_otg_ep_control(1, USB_DIR_OUT,
++                      DEPCTL_EPDIS|DEPCTL_SNAK|DEPCTL_BULK_TYPE, 0);
++      s3c_otg_ep_control(2, USB_DIR_IN,
++                      DEPCTL_EPDIS|DEPCTL_SNAK|DEPCTL_BULK_TYPE, 0);
++      s3c_otg_ep_control(3, USB_DIR_IN,
++                      DEPCTL_EPDIS|DEPCTL_SNAK|DEPCTL_BULK_TYPE, 0);
++
++      /* Unmask EP interrupts */
++      s3c_otg_writel(dev, S3C_UDC_INT_IN_EP0
++                      |S3C_UDC_INT_IN_EP2
++                      |S3C_UDC_INT_IN_EP3
++                      |S3C_UDC_INT_OUT_EP0
++                      |S3C_UDC_INT_OUT_EP1,
++                      S3C_UDC_OTG_DAINTMSK);
++
++      /* Unmask device OUT EP common interrupts */
++      s3c_otg_writel(dev, DOEPMSK_INIT, S3C_UDC_OTG_DOEPMSK);
++
++      /* Unmask device IN EP common interrupts */
++      s3c_otg_writel(dev, DIEPMSK_INIT, S3C_UDC_OTG_DIEPMSK);
++
++      /* Set Rx FIFO Size */
++      s3c_otg_writel(dev, RX_FIFO_SIZE, S3C_UDC_OTG_GRXFSIZ);
++
++      /* Set Non Periodic Tx FIFO Size */
++      s3c_otg_writel(dev, NPTX_FIFO_SIZE|NPTX_FIFO_START_ADDR,
++                      (u32)S3C_UDC_OTG_GNPTXFSIZ);
++
++      /* Clear NAK bit of EP0 For Slave mode */
++      s3c_otg_ep_control(0, USB_DIR_OUT, DEPCTL_EPDIS|DEPCTL_CNAK, 0);
++
++      /* Initialize OTG Link Core */
++      s3c_otg_writel(dev, GAHBCFG_INIT, S3C_UDC_OTG_GAHBCFG);
++}
++
++static int s3c_otg_enable(struct s3c_udc *dev)
++{
++      /* USB_SIG_MASK */
++      __raw_writel(S3C64XX_OTHERS_USBMASK | __raw_readl(S3C64XX_OTHERS),
++                                                              S3C64XX_OTHERS);
++
++      /* Initializes OTG Phy. */
++      s3c_otg_writel(dev, SUSPEND_DISABLE, S3C_USBOTG_PHYPWR);
++      
++      s3c_otg_writel(dev, dev->phyclk, S3C_USBOTG_PHYCLK);
++
++      s3c_otg_writel(dev, SW_RST_ON, S3C_USBOTG_RSTCON);
++      udelay(50);
++
++      s3c_otg_writel(dev, SW_RST_OFF, S3C_USBOTG_RSTCON);
++      udelay(50);
++
++      s3c_otg_config(dev);
++
++      DBG(2, "S3C USB 2.0 OTG Controller Core Initialized\n");
++
++      dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++      return 0;
++}
++
++/*
++ *    usb client interrupt handler.
++ */
++static irqreturn_t s3c_otg_irq(int irq, void *_dev)
++{
++      struct s3c_udc *dev = _dev;
++      u32 intr_status;
++      u32 usb_status;
++      u32 gintmsk;
++
++      spin_lock(&dev->lock);
++
++      intr_status = s3c_otg_readl(dev, S3C_UDC_OTG_GINTSTS);
++      gintmsk = s3c_otg_readl(dev, S3C_UDC_OTG_GINTMSK);
++
++      DBG(1, "GINTSTS=0x%x(on state %s), GINTMSK : 0x%x\n",
++                      intr_status, state_names[dev->ep0state], gintmsk);
++
++      if (!intr_status) {
++              spin_unlock(&dev->lock);
++              return IRQ_HANDLED;
++      }
++
++      if (intr_status & INT_ENUMDONE) {
++              DBG(2, "Speed Detection interrupt\n");
++              s3c_otg_writel(dev, INT_ENUMDONE, S3C_UDC_OTG_GINTSTS);
++
++              usb_status = ENUM_SPEED(s3c_otg_readl(dev, S3C_UDC_OTG_DSTS));
++
++              if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ))
++                      s3c_otg_set_ep(dev, USB_SPEED_FULL);
++              else
++                      s3c_otg_set_ep(dev, USB_SPEED_HIGH);
++      }
++
++      if (intr_status & INT_EARLY_SUSPEND) {
++              DBG(2, "Early suspend interrupt\n");
++              s3c_otg_writel(dev, INT_EARLY_SUSPEND, S3C_UDC_OTG_GINTSTS);
++      }
++
++      if (intr_status & INT_SUSPEND) {
++              DBG(2, "Suspend interrupt\n");
++              s3c_otg_writel(dev, INT_SUSPEND, S3C_UDC_OTG_GINTSTS);
++
++              if (dev->gadget.speed != USB_SPEED_UNKNOWN
++                  && dev->driver
++                  && dev->driver->suspend) {
++                      dev->driver->suspend(&dev->gadget);
++              }
++      }
++
++      if (intr_status & INT_RESUME) {
++              DBG(2, "Resume interrupt\n");
++              s3c_otg_writel(dev, INT_RESUME, S3C_UDC_OTG_GINTSTS);
++
++              if (dev->gadget.speed != USB_SPEED_UNKNOWN
++                  && dev->driver
++                  && dev->driver->resume) {
++                      dev->driver->resume(&dev->gadget);
++              }
++      }
++
++      if (intr_status & INT_RESET) {
++              DBG(2, "Reset interrupt\n");
++              s3c_otg_writel(dev, INT_RESET, S3C_UDC_OTG_GINTSTS);
++
++              usb_status = s3c_otg_readl(dev, S3C_UDC_OTG_GOTGCTL);
++
++              if (usb_status | (A_SESSION_VALID|B_SESSION_VALID)) {
++                      if (reset_available) {
++                              s3c_otg_config(dev);
++                              dev->ep0state = WAIT_FOR_SETUP;
++                              reset_available = 0;
++                      }
++              } else {
++                      reset_available = 1;
++                      DBG(2, "RESET handling skipped\n");
++              }
++      }
++
++      if (intr_status & INT_RX_FIFO_NOT_EMPTY) {
++              s3c_otg_handle_ep(dev, gintmsk);
++              spin_unlock(&dev->lock);
++
++              return IRQ_HANDLED;
++      }
++
++
++      if (intr_status & INT_TX_FIFO_EMPTY) {
++              DBG(2, "INT_TX_FIFO_EMPTY ep_num=%d\n", tx_ep_num);
++              s3c_otg_handle_ep_in(dev, tx_ep_num);
++      }
++
++      spin_unlock(&dev->lock);
++
++      return IRQ_HANDLED;
++}
++
++static void s3c_otg_stop_activity(struct s3c_udc *dev,
++              struct usb_gadget_driver *driver)
++{
++      int i;
++
++      /* don't disconnect drivers more than once */
++      if (dev->gadget.speed == USB_SPEED_UNKNOWN)
++              driver = 0;
++      dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++      /* prevent new request submissions, kill any outstanding requests  */
++      for (i = 0; i < S3C_MAX_ENDPOINTS; i++) {
++              struct s3c_ep *ep = &dev->ep[i];
++              ep->stopped = 1;
++              s3c_otg_nuke(ep, -ESHUTDOWN);
++      }
++
++      /* report disconnect; the driver is already quiesced */
++      if (driver) {
++              spin_unlock(&dev->lock);
++              driver->disconnect(&dev->gadget);
++              spin_lock(&dev->lock);
++      }
++
++      /* re-init driver-visible data structures */
++      s3c_otg_reinit(dev);
++}
++
++/*
++ * Register the gadget driver. Used by gadget drivers when
++ * registering themselves with the controller.
++ */
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++      struct s3c_udc *dev = the_controller;
++      int retval;
++
++      if (!driver
++          || driver->speed != USB_SPEED_HIGH
++          || !driver->bind
++          || !driver->setup)
++              return -EINVAL;
++
++      if (!dev) {
++              DBG(3, "No device\n");
++              return -ENODEV;
++      }
++
++      if (dev->driver) {
++              DBG(3, "Already bound to %s\n", driver->driver.name);
++              return -EBUSY;
++      }
++
++      /* first hook up the driver ... */
++      dev->driver = driver;
++      dev->gadget.dev.driver = &driver->driver;
++      retval = device_add(&dev->gadget.dev);
++
++      if (retval) { /* TODO */
++              DBG(3, "target device_add failed, error %d\n", retval);
++              return retval;
++      }
++
++      retval = driver->bind(&dev->gadget);
++      if (retval) {
++              DBG(3, "%s: bind to driver %s --> error %d\n",
++                              dev->gadget.name, driver->driver.name, retval);
++              device_del(&dev->gadget.dev);
++
++              dev->driver = 0;
++              dev->gadget.dev.driver = 0;
++              return retval;
++      }
++
++      dev_info(&dev->gadget.dev, "Registered gadget driver '%s'\n",
++                                                         driver->driver.name);
++      s3c_otg_enable(dev);
++
++      enable_irq(IRQ_OTG);
++
++      return 0;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++/*
++  Unregister entry point for the peripheral controller driver.
++*/
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++      struct s3c_udc *dev = the_controller;
++      unsigned long flags;
++
++      if (!dev)
++              return -ENODEV;
++
++      if (!driver || driver != dev->driver)
++              return -EINVAL;
++
++      spin_lock_irqsave(&dev->lock, flags);
++
++      dev->driver = 0;
++      s3c_otg_stop_activity(dev, driver);
++
++      spin_unlock_irqrestore(&dev->lock, flags);
++
++      if (driver->unbind)
++              driver->unbind(&dev->gadget);
++
++      device_del(&dev->gadget.dev);
++
++      disable_irq(IRQ_OTG);
++
++      dev_info(&dev->gadget.dev, "Unregistered gadget driver '%s'\n",
++                                                         driver->driver.name);
++
++      s3c_otg_disable(dev);
++
++      return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++/*
++ *    device-scoped parts of the api to the usb controller hardware
++ */
++static int s3c_otg_get_frame(struct usb_gadget *gadget)
++{
++      u32 frame = s3c_otg_readl(the_controller, S3C_UDC_OTG_DSTS);
++      return FRAME_CNT(frame);
++}
++
++static int s3c_otg_wakeup(struct usb_gadget *gadget)
++{
++      return -EOPNOTSUPP;
++}
++
++static int s3c_otg_set_selfpowered(
++              struct usb_gadget *gadget, int is_selfpowered)
++{
++      return -EOPNOTSUPP;
++}
++
++static int s3c_otg_pullup(struct usb_gadget *gadget, int is_on)
++{
++      return -EOPNOTSUPP;
++}
++
++static int s3c_otg_vbus_session(struct usb_gadget *gadget, int is_active)
++{
++      return -EOPNOTSUPP;
++}
++
++static int s3c_otg_vbus_draw(struct usb_gadget *gadget, unsigned mA)
++{
++      return -EOPNOTSUPP;
++}
++
++static const struct usb_gadget_ops s3c_udc_ops = {
++      .get_frame = s3c_otg_get_frame,
++      .wakeup = s3c_otg_wakeup,
++      .set_selfpowered = s3c_otg_set_selfpowered,
++      .vbus_session = s3c_otg_vbus_session,
++      .vbus_draw = s3c_otg_vbus_draw,
++      .pullup = s3c_otg_pullup,
++};
++
++static void nop_release(struct device *dev)
++{
++      DBG(2, "%s\n", dev->bus_id);
++}
++
++static struct s3c_udc memory = {
++      .usb_address = 0,
++      .gadget = {
++                 .ops = &s3c_udc_ops,
++                 .ep0 = &memory.ep[0].ep,
++                 .name = driver_name,
++                 .dev = {
++                         .bus_id = "gadget",
++                         .release = nop_release,
++                         },
++                 },
++      .ep[0] = {
++                .ep = {
++                       .name = ep0name,
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP0_FIFO_SIZE,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = 0,
++                .bmAttributes = 0,
++
++                .ep_type = ep_control,
++                .fifo = (u32) S3C_UDC_OTG_EP0_FIFO,
++                },
++      .ep[1] = {
++                .ep = {
++                       .name = "ep1-bulk",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = 1,
++                .bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++                .ep_type = ep_bulk_out,
++                .fifo = (u32) S3C_UDC_OTG_EP1_FIFO,
++                },
++      .ep[2] = {
++                .ep = {
++                       .name = "ep2-bulk",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 2,
++                .bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++                .ep_type = ep_bulk_in,
++                .fifo = (u32) S3C_UDC_OTG_EP2_FIFO,
++                },
++
++      .ep[3] = {
++                .ep = {
++                       .name = "ep3-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 3,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP3_FIFO,
++                },
++      .ep[4] = {
++                .ep = {
++                       .name = "ep4-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 4,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP4_FIFO,
++                },
++      .ep[5] = {
++                .ep = {
++                       .name = "ep5-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE2,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 5,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP5_FIFO,
++                },
++      .ep[6] = {
++                .ep = {
++                       .name = "ep6-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE2,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 6,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP6_FIFO,
++                },
++      .ep[7] = {
++                .ep = {
++                       .name = "ep7-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE2,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 7,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP7_FIFO,
++                },
++      .ep[8] = {
++                .ep = {
++                       .name = "ep8-int",
++                       .ops = &s3c_ep_ops,
++                       .maxpacket = EP_FIFO_SIZE2,
++                       },
++                .dev = &memory,
++
++                .bEndpointAddress = USB_DIR_IN | 8,
++                .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++                .ep_type = ep_interrupt,
++                .fifo = (u32) S3C_UDC_OTG_EP8_FIFO,
++                },
++};
++
++static struct clk *otg_clock;
++
++/*
++ * binds to the platform device
++ */
++static int s3c_otg_probe(struct platform_device *pdev)
++{
++      struct s3c_udc *dev = &memory;
++      struct s3c_plat_otg_data *pdata = pdev->dev.platform_data;
++      int retval;
++
++      dev->reg_base = ioremap(pdev->resource[0].start,
++                      pdev->resource[0].end - pdev->resource[0].start);
++      if (dev->reg_base == NULL) {
++              dev_err(&pdev->dev, "Unable to map USB OTG physical regs\n");
++              return -ENOMEM;
++      }
++
++
++      DBG(2, "%p\n", pdev);
++
++      spin_lock_init(&dev->lock);
++      dev->dev = pdev;
++
++      device_initialize(&dev->gadget.dev);
++      dev->gadget.dev.parent = &pdev->dev;
++
++      dev->gadget.is_dualspeed = 1;
++      dev->gadget.is_otg = 0;
++      dev->gadget.is_a_peripheral = 0;
++      dev->gadget.b_hnp_enable = 0;
++      dev->gadget.a_hnp_support = 0;
++      dev->gadget.a_alt_hnp_support = 0;
++
++      dev->phyclk = pdata->phyclk;
++
++      the_controller = dev;
++      platform_set_drvdata(pdev, dev);
++
++      otg_clock = clk_get(&pdev->dev, "otg");
++      if (otg_clock == NULL) {
++              DBG(3, "failed to find otg clock source\n");
++              return -ENOENT;
++      }
++      clk_enable(otg_clock);
++
++      s3c_otg_reinit(dev);
++
++      local_irq_disable();
++
++      /* irq setup after old hardware state is cleaned up */
++      retval = request_irq(pdev->resource[1].start, s3c_otg_irq,
++                      IRQF_DISABLED, driver_name, dev);
++
++      if (retval != 0) {
++              DBG(3, "%s: can't get irq %i - %d\n",
++                              driver_name, IRQ_OTG, retval);
++              return -EBUSY;
++      }
++
++      disable_irq(IRQ_OTG);
++      local_irq_enable();
++      create_proc_files();
++
++      return retval;
++}
++
++static int s3c_otg_remove(struct platform_device *pdev)
++{
++      struct s3c_udc *dev = platform_get_drvdata(pdev);
++
++      if (otg_clock != NULL) {
++              clk_disable(otg_clock);
++              clk_put(otg_clock);
++              otg_clock = NULL;
++      }
++
++      remove_proc_files();
++      usb_gadget_unregister_driver(dev->driver);
++
++      free_irq(IRQ_OTG, dev);
++
++      platform_set_drvdata(pdev, 0);
++
++      the_controller = 0;
++
++      if (dev->reg_base)
++              iounmap(dev->reg_base);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c_otg_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct s3c_udc *dev = the_controller;
++
++      if (dev->driver) {
++              disable_irq(IRQ_OTG);
++              s3c_otg_disable(dev);
++              clk_disable(otg_clock);
++      }
++
++      return 0;
++}
++
++static int s3c_otg_resume(struct platform_device *pdev)
++{
++      struct s3c_udc *dev = the_controller;
++
++      if (dev->driver) {
++              clk_enable(otg_clock);
++              s3c_otg_enable(dev);
++              s3c_otg_reinit(dev);
++              enable_irq(IRQ_OTG);
++      }
++
++      return 0;
++}
++#else
++#define s3c_otg_suspend NULL
++#define s3c_otg_resume  NULL
++#endif
++
++/*-------------------------------------------------------------------------*/
++static struct platform_driver s3c_otg_driver = {
++      .probe          = s3c_otg_probe,
++      .remove         = s3c_otg_remove,
++      .suspend        = s3c_otg_suspend,
++      .resume         = s3c_otg_resume,
++      .driver         = {
++              .owner  = THIS_MODULE,
++              .name   = "s3c-otg-usbgadget",
++      },
++};
++
++static int __init otg_init(void)
++{
++      int ret;
++
++      ret = platform_driver_register(&s3c_otg_driver);
++      if (!ret)
++              printk(KERN_INFO "Loaded %s version %s %s\n",
++                              driver_name, DRIVER_VERSION, "(Slave Mode)");
++
++      return ret;
++}
++
++static void __exit otg_exit(void)
++{
++      platform_driver_unregister(&s3c_otg_driver);
++      printk(KERN_INFO "Unloaded %s version %s\n",
++                      driver_name, DRIVER_VERSION);
++}
++
++module_init(otg_init);
++module_exit(otg_exit);
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_VERSION(DRIVER_VERSION);
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c-udc.h linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c-udc.h
+--- linux-2.6.29-rc3.owrt/drivers/usb/gadget/s3c-udc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/gadget/s3c-udc.h      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,132 @@
++/*
++ * drivers/usb/gadget/s3c-udc.h
++ * Samsung S3C on-chip full/high speed USB device controllers
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Minkyu Kang <mk7.kang@samsung.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ */
++
++#ifndef __S3C_UDC_H
++#define __S3C_UDC_H
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/types.h>
++#include <linux/version.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/proc_fs.h>
++#include <linux/mm.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <asm/byteorder.h>
++#include <linux/io.h>
++#include <asm/dma.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++#include <mach/hardware.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++/* Max packet size */
++#if defined(CONFIG_USB_GADGET_S3C_FS)
++#define EP0_FIFO_SIZE         8
++#define EP_FIFO_SIZE          64
++#define S3C_MAX_ENDPOINTS     5
++#elif defined(CONFIG_USB_GADGET_S3C_HS)
++#define EP0_FIFO_SIZE         64
++#define EP_FIFO_SIZE          512
++#define EP_FIFO_SIZE2         1024
++#define S3C_MAX_ENDPOINTS     9
++#else
++#define EP0_FIFO_SIZE         64
++#define EP_FIFO_SIZE          512
++#define EP_FIFO_SIZE2         1024
++#define S3C_MAX_ENDPOINTS     16
++#endif
++
++#define WAIT_FOR_SETUP          0
++#define DATA_STATE_XMIT         1
++#define DATA_STATE_NEED_ZLP     2
++#define WAIT_FOR_OUT_STATUS     3
++#define DATA_STATE_RECV         4
++
++enum ep_type {
++      ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
++};
++
++struct s3c_ep {
++      struct usb_ep ep;
++      struct s3c_udc *dev;
++
++      const struct usb_endpoint_descriptor *desc;
++      struct list_head queue;
++      unsigned long pio_irqs;
++
++      u8 stopped;
++      u8 bEndpointAddress;
++      u8 bmAttributes;
++
++      u32 ep_type;
++      u32 fifo;
++#ifdef CONFIG_USB_GADGET_S3C_FS
++      u32 csr1;
++      u32 csr2;
++#endif
++};
++
++struct s3c_request {
++      struct usb_request req;
++      struct list_head queue;
++};
++
++struct s3c_udc {
++      struct usb_gadget gadget;
++      struct usb_gadget_driver *driver;
++      struct platform_device *dev;
++      spinlock_t lock;
++      u32 * reg_base;
++
++      int phyclk;
++      int ep0state;
++      struct s3c_ep ep[S3C_MAX_ENDPOINTS];
++
++      unsigned char usb_address;
++
++      unsigned req_pending:1;
++      unsigned req_std:1;
++      unsigned req_config:1;
++};
++
++extern struct s3c_udc *the_controller;
++
++#define ep_is_in(EP)          (((EP)->bEndpointAddress & USB_DIR_IN) \
++                                                              == USB_DIR_IN)
++#define ep_index(EP)          ((EP)->bEndpointAddress & 0xF)
++#define ep_maxpacket(EP)      ((EP)->ep.maxpacket)
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-hcd.c linux-2.6.29-rc3.owrt.om/drivers/usb/host/ohci-hcd.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-hcd.c  2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/host/ohci-hcd.c       2009-05-10 22:28:00.000000000 +0200
+@@ -997,7 +997,7 @@
+ #define SA1111_DRIVER         ohci_hcd_sa1111_driver
+ #endif
+-#ifdef CONFIG_ARCH_S3C2410
++#ifdef CONFIG_PLAT_S3C
+ #include "ohci-s3c2410.c"
+ #define PLATFORM_DRIVER               ohci_hcd_s3c2410_driver
+ #endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-s3c2410.c linux-2.6.29-rc3.owrt.om/drivers/usb/host/ohci-s3c2410.c
+--- linux-2.6.29-rc3.owrt/drivers/usb/host/ohci-s3c2410.c      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/host/ohci-s3c2410.c   2009-05-10 22:28:00.000000000 +0200
+@@ -21,9 +21,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
+-
+ #include <mach/hardware.h>
+-#include <mach/usb-control.h>
++#include <mach/regs-gpio.h>
++#include <plat/usb-control.h>
+ #define valid_port(idx) ((idx) == 1 || (idx) == 2)
+@@ -58,9 +58,8 @@
+               info->hcd       = hcd;
+               info->report_oc = s3c2410_hcd_oc;
+-              if (info->enable_oc != NULL) {
++              if (info->enable_oc != NULL)
+                       (info->enable_oc)(info, 1);
+-              }
+       }
+ }
+@@ -74,9 +73,8 @@
+               info->report_oc = NULL;
+               info->hcd       = NULL;
+-              if (info->enable_oc != NULL) {
++              if (info->enable_oc != NULL)
+                       (info->enable_oc)(info, 0);
+-              }
+       }
+       clk_disable(clk);
+@@ -90,14 +88,14 @@
+ */
+ static int
+-ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
++ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf)
+ {
+       struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+       struct s3c2410_hcd_port *port;
+       int orig;
+       int portno;
+-      orig  = ohci_hub_status_data (hcd, buf);
++      orig  = ohci_hub_status_data(hcd, buf);
+       if (info == NULL)
+               return orig;
+@@ -147,7 +145,7 @@
+  * request.
+ */
+-static int ohci_s3c2410_hub_control (
++static int ohci_s3c2410_hub_control(
+       struct usb_hcd  *hcd,
+       u16             typeReq,
+       u16             wValue,
+@@ -201,9 +199,8 @@
+                       dev_dbg(hcd->self.controller,
+                               "ClearPortFeature: OVER_CURRENT\n");
+-                      if (valid_port(wIndex)) {
++                      if (valid_port(wIndex))
+                               info->port[wIndex-1].oc_status = 0;
+-                      }
+                       goto out;
+@@ -244,28 +241,28 @@
+               desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+               if (info->enable_oc) {
+-                      desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+-                      desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
++                      desc->wHubCharacteristics &=
++                                      ~cpu_to_le16(HUB_CHAR_OCPM);
++                      desc->wHubCharacteristics |=
++                                      cpu_to_le16(0x0008|0x0001);
+               }
+-              dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
++              dev_dbg(hcd->self.controller,
++                      "wHubCharacteristics after 0x%04x\n",
+                       desc->wHubCharacteristics);
+               return ret;
+       case GetPortStatus:
+               /* check port status */
+-
+               dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+               if (valid_port(wIndex)) {
+-                      if (info->port[wIndex-1].oc_changed) {
++                      if (info->port[wIndex-1].oc_changed)
+                               *data |= cpu_to_le32(RH_PS_OCIC);
+-                      }
+-                      if (info->port[wIndex-1].oc_status) {
++                      if (info->port[wIndex-1].oc_status)
+                               *data |= cpu_to_le32(RH_PS_POCI);
+-                      }
+               }
+       }
+@@ -308,6 +305,42 @@
+       local_irq_restore(flags);
+ }
++/* switching of USB pads */
++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
++                           char *buf)
++{
++      if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
++              return sprintf(buf, "host\n");
++
++      return sprintf(buf, "device\n");
++}
++
++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
++                          const char *buf, size_t count)
++{
++      if (!strncmp(buf, "host", 4)) {
++              printk(KERN_WARNING "s3c2410: changing usb to host\n");
++              s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
++                                    S3C2410_MISCCR_USBHOST);
++              /* FIXME:
++               * - call machine-specific disable-pullup function i
++               * - enable +Vbus (if hardware supports it)
++               */
++              s3c2410_gpio_setpin(S3C2410_GPB9, 0);
++      } else if (!strncmp(buf, "device", 6)) {
++              printk(KERN_WARNING "s3c2410: changing usb to device\n");
++              s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
++              s3c2410_gpio_setpin(S3C2410_GPB9, 1);
++      } else {
++              printk(KERN_WARNING "s3c2410: unknown mode\n");
++              return -EINVAL;
++      }
++
++      return count;
++}
++
++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
++
+ /* may be called without controller electrically present */
+ /* may be called with controller, bus, and devices active */
+@@ -323,8 +356,9 @@
+ */
+ static void
+-usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
++usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev)
+ {
++      device_remove_file(&dev->dev, &dev_attr_usb_mode);
+       usb_remove_hcd(hcd);
+       s3c2410_stop_hc(dev);
+       iounmap(hcd->regs);
+@@ -341,8 +375,8 @@
+  * through the hotplug entry's driver_data.
+  *
+  */
+-static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+-                                struct platform_device *dev)
++static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
++                               struct platform_device *dev)
+ {
+       struct usb_hcd *hcd = NULL;
+       int retval;
+@@ -392,9 +426,16 @@
+       if (retval != 0)
+               goto err_ioremap;
++      retval = device_create_file(&dev->dev, &dev_attr_usb_mode);
++      if (retval != 0)
++              goto err_hcd;
++
+       return 0;
+- err_ioremap:
++err_hcd:
++      usb_remove_hcd(hcd);
++
++err_ioremap:
+       s3c2410_stop_hc(dev);
+       iounmap(hcd->regs);
+       clk_put(usb_clk);
+@@ -413,17 +454,19 @@
+ /*-------------------------------------------------------------------------*/
+ static int
+-ohci_s3c2410_start (struct usb_hcd *hcd)
++ohci_s3c2410_start(struct usb_hcd *hcd)
+ {
+-      struct ohci_hcd *ohci = hcd_to_ohci (hcd);
++      struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+       int ret;
+-      if ((ret = ohci_init(ohci)) < 0)
++      ret = ohci_init(ohci);
++      if (ret < 0)
+               return ret;
+-      if ((ret = ohci_run (ohci)) < 0) {
+-              err ("can't start %s", hcd->self.bus_name);
+-              ohci_stop (hcd);
++      ret = ohci_run(ohci);
++      if (ret < 0) {
++              err("can't start %s", hcd->self.bus_name);
++              ohci_stop(hcd);
+               return ret;
+       }
+@@ -488,15 +531,23 @@
+       return 0;
+ }
++static int ohci_hcd_s3c2410_drv_resume(struct platform_device *pdev)
++{
++      struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++      ohci_finish_controller_resume(hcd);
++      return 0;
++}
++
+ static struct platform_driver ohci_hcd_s3c2410_driver = {
+       .probe          = ohci_hcd_s3c2410_drv_probe,
+       .remove         = ohci_hcd_s3c2410_drv_remove,
+       .shutdown       = usb_hcd_platform_shutdown,
+       /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
+-      /*.resume       = ohci_hcd_s3c2410_drv_resume, */
++      .resume         = ohci_hcd_s3c2410_drv_resume,
+       .driver         = {
+               .owner  = THIS_MODULE,
+-              .name   = "s3c2410-ohci",
++              .name   = "s3c-ohci",
+       },
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/usb/Kconfig linux-2.6.29-rc3.owrt.om/drivers/usb/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/usb/Kconfig  2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/usb/Kconfig       2009-05-10 22:28:00.000000000 +0200
+@@ -31,7 +31,7 @@
+       default y if SA1111
+       default y if ARCH_OMAP
+       default y if ARCH_LH7A404
+-      default y if ARCH_S3C2410
++      default y if PLAT_S3C
+       default y if PXA27x
+       default y if PXA3xx
+       default y if ARCH_EP93XX
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/backlight/gta01_bl.c linux-2.6.29-rc3.owrt.om/drivers/video/backlight/gta01_bl.c
+--- linux-2.6.29-rc3.owrt/drivers/video/backlight/gta01_bl.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/video/backlight/gta01_bl.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,269 @@
++/*
++ *  Backlight Driver for FIC GTA01 (Neo1973) GSM Phone
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ *  based on corgi_cl.c, Copyright (c) 2004-2006 Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation, version 2.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * Javi Roman <javiroman@kernel-labs.org>:
++ *    implement PWM, instead of simple on/off switching
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++#include <linux/clk.h>
++
++#include <mach/hardware.h>
++#include <mach/gta01.h>
++#include <plat/pwm.h>
++
++#include <plat/regs-timer.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++static struct backlight_properties gta01bl_prop;
++static struct backlight_device *gta01_backlight_device;
++static struct gta01bl_machinfo *bl_machinfo;
++
++static unsigned long gta01bl_flags;
++
++struct gta01bl_data {
++      int intensity;
++      struct mutex mutex;
++      struct clk *clk;
++      struct s3c2410_pwm pwm;
++};
++
++static struct gta01bl_data gta01bl;
++
++static int gta01bl_defer_resume_backlight;
++
++#define GTA01BL_SUSPENDED     0x01
++#define GTA01BL_BATTLOW       0x02
++
++/* On the GTA01 / Neo1973, we use a 50 or 66MHz PCLK, which gives
++ * us a 6.25..8.25MHz DIV8 clock, which is further divided by a
++ * prescaler of 4, resulting in a 1.56..2.06MHz tick.  This results in a
++ * minimum frequency of 24..31Hz.  At 400Hz, we need to set the count
++ * to something like 3906..5156, providing us a way sufficient resolution
++ * for display brightness adjustment. */
++#define GTA01BL_COUNTER 5156
++
++static int gta01bl_send_intensity(struct backlight_device *bd)
++{
++      int intensity = bd->props.brightness;
++
++      if (bd->props.power != FB_BLANK_UNBLANK)
++              intensity = 0;
++      if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++              intensity = 0;
++      if (gta01bl_flags & GTA01BL_SUSPENDED)
++              intensity = 0;
++      if (gta01bl_flags & GTA01BL_BATTLOW)
++              intensity &= bl_machinfo->limit_mask;
++
++      mutex_lock(&gta01bl.mutex);
++#ifdef GTA01_BACKLIGHT_ONOFF_ONLY
++      if (intensity)
++              neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
++      else
++              neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 0);
++#else
++      if (intensity == bd->props.max_brightness) {
++              neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
++              s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
++      } else  {
++              s3c2410_pwm_duty_cycle(intensity & 0xffff, &gta01bl.pwm);
++              s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPB0_TOUT0);
++      }
++#endif
++      mutex_unlock(&gta01bl.mutex);
++
++      gta01bl.intensity = intensity;
++      return 0;
++}
++
++static int gta01bl_init_hw(void)
++{
++      int rc;
++
++      rc = s3c2410_pwm_init(&gta01bl.pwm);
++      if (rc)
++              return rc;
++
++      gta01bl.pwm.timerid = PWM0;
++      gta01bl.pwm.prescaler = (4 - 1);
++      gta01bl.pwm.divider = S3C2410_TCFG1_MUX0_DIV8;
++      gta01bl.pwm.counter = GTA01BL_COUNTER;
++      gta01bl.pwm.comparer = gta01bl.pwm.counter;
++
++      rc = s3c2410_pwm_enable(&gta01bl.pwm);
++      if (rc)
++              return rc;
++
++      s3c2410_pwm_start(&gta01bl.pwm);
++
++      gta01bl_prop.max_brightness = gta01bl.pwm.counter;
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int gta01bl_suspend(struct platform_device *dev, pm_message_t state)
++{
++      gta01bl_flags |= GTA01BL_SUSPENDED;
++      gta01bl_send_intensity(gta01_backlight_device);
++      neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 0);
++      s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
++      return 0;
++}
++
++void gta01bl_deferred_resume(void)
++{
++      mutex_lock(&gta01bl.mutex);
++      gta01bl_init_hw();
++      mutex_unlock(&gta01bl.mutex);
++
++      gta01bl_flags &= ~GTA01BL_SUSPENDED;
++      gta01bl_send_intensity(gta01_backlight_device);
++}
++EXPORT_SYMBOL_GPL(gta01bl_deferred_resume);
++
++static int gta01bl_resume(struct platform_device *dev)
++{
++      if (!gta01bl_defer_resume_backlight)
++              gta01bl_deferred_resume();
++      return 0;
++}
++#else
++#define gta01bl_suspend       NULL
++#define gta01bl_resume        NULL
++#endif
++
++static int gta01bl_get_intensity(struct backlight_device *bd)
++{
++      return gta01bl.intensity;
++}
++
++static int gta01bl_set_intensity(struct backlight_device *bd)
++{
++      gta01bl_send_intensity(gta01_backlight_device);
++      return 0;
++}
++
++/*
++ * Called when the battery is low to limit the backlight intensity.
++ * If limit==0 clear any limit, otherwise limit the intensity
++ */
++void gta01bl_limit_intensity(int limit)
++{
++      if (limit)
++              gta01bl_flags |= GTA01BL_BATTLOW;
++      else
++              gta01bl_flags &= ~GTA01BL_BATTLOW;
++      gta01bl_send_intensity(gta01_backlight_device);
++}
++EXPORT_SYMBOL_GPL(gta01bl_limit_intensity);
++
++
++static struct backlight_ops gta01bl_ops = {
++      .get_brightness = gta01bl_get_intensity,
++      .update_status  = gta01bl_set_intensity,
++};
++
++static int __init gta01bl_probe(struct platform_device *pdev)
++{
++      struct gta01bl_machinfo *machinfo = pdev->dev.platform_data;
++      int rc;
++
++#ifdef GTA01_BACKLIGHT_ONOFF_ONLY
++      s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
++      gta01bl_prop.max_brightness = 1;
++#else
++      rc = gta01bl_init_hw();
++      if (rc < 0)
++              return rc;
++#endif
++      mutex_init(&gta01bl.mutex);
++
++      if (!machinfo->limit_mask)
++              machinfo->limit_mask = -1;
++
++      gta01bl_defer_resume_backlight = machinfo->defer_resume_backlight;
++
++      gta01_backlight_device = backlight_device_register("gta01-bl",
++                                                         &pdev->dev, NULL,
++                                                         &gta01bl_ops);
++      if (IS_ERR(gta01_backlight_device))
++              return PTR_ERR(gta01_backlight_device);
++
++      gta01bl_prop.power = FB_BLANK_UNBLANK;
++      gta01bl_prop.brightness = gta01bl_prop.max_brightness;
++      memcpy(&gta01_backlight_device->props,
++             &gta01bl_prop, sizeof(gta01bl_prop));
++      gta01bl_send_intensity(gta01_backlight_device);
++
++      return 0;
++}
++
++static int gta01bl_remove(struct platform_device *dev)
++{
++#ifndef GTA01_BACKLIGHT_ONOFF_ONLY
++      s3c2410_pwm_disable(&gta01bl.pwm);
++#endif
++      backlight_device_unregister(gta01_backlight_device);
++      mutex_destroy(&gta01bl.mutex);
++
++      s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
++      neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
++
++      return 0;
++}
++
++static struct platform_driver gta01bl_driver = {
++      .probe          = gta01bl_probe,
++      .remove         = gta01bl_remove,
++      .suspend        = gta01bl_suspend,
++      .resume         = gta01bl_resume,
++      .driver         = {
++              .name   = "gta01-bl",
++      },
++};
++
++static int __init gta01bl_init(void)
++{
++      return platform_driver_register(&gta01bl_driver);
++}
++
++static void __exit gta01bl_exit(void)
++{
++      platform_driver_unregister(&gta01bl_driver);
++}
++
++module_init(gta01bl_init);
++module_exit(gta01bl_exit);
++
++MODULE_DESCRIPTION("FIC GTA01 (Neo1973) Backlight Driver");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/backlight/Kconfig linux-2.6.29-rc3.owrt.om/drivers/video/backlight/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/video/backlight/Kconfig      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/backlight/Kconfig   2009-05-10 22:28:00.000000000 +0200
+@@ -149,6 +149,13 @@
+         the PWL module of OMAP1 processors.  Say Y if your board
+         uses this hardware.
++config BACKLIGHT_GTA01
++      tristate "FIC Neo1973 GTA01 Backlight Driver"
++      depends on BACKLIGHT_CLASS_DEVICE && MACH_NEO1973_GTA01
++      default y
++      help
++        If you have a FIC Neo1973 GTA01, say y to enable the backlight driver.
++
+ config BACKLIGHT_HP680
+       tristate "HP Jornada 680 Backlight Driver"
+       depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/backlight/Makefile linux-2.6.29-rc3.owrt.om/drivers/video/backlight/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/video/backlight/Makefile     2009-05-10 22:08:45.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/backlight/Makefile  2009-05-10 22:28:00.000000000 +0200
+@@ -12,6 +12,8 @@
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
+ obj-$(CONFIG_BACKLIGHT_GENERIC)       += generic_bl.o
++obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
++obj-$(CONFIG_BACKLIGHT_GTA01) += gta01_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO)        += locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/console/fbcon.c linux-2.6.29-rc3.owrt.om/drivers/video/console/fbcon.c
+--- linux-2.6.29-rc3.owrt/drivers/video/console/fbcon.c        2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/console/fbcon.c     2009-05-10 22:28:00.000000000 +0200
+@@ -373,6 +373,9 @@
+       int c;
+       int mode;
++      if (info->state != FBINFO_STATE_RUNNING)
++              return;
++
+       acquire_console_sem();
+       if (ops && ops->currcon != -1)
+               vc = vc_cons[ops->currcon].d;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/display/jbt6k74.c linux-2.6.29-rc3.owrt.om/drivers/video/display/jbt6k74.c
+--- linux-2.6.29-rc3.owrt/drivers/video/display/jbt6k74.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/video/display/jbt6k74.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,768 @@
++/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>,
++ *       Stefan Schmidt <stefan@openmoko.org>
++ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/jbt6k74.h>
++#include <linux/fb.h>
++#include <linux/time.h>
++
++enum jbt_register {
++      JBT_REG_SLEEP_IN                = 0x10,
++      JBT_REG_SLEEP_OUT               = 0x11,
++
++      JBT_REG_DISPLAY_OFF             = 0x28,
++      JBT_REG_DISPLAY_ON              = 0x29,
++
++      JBT_REG_RGB_FORMAT              = 0x3a,
++      JBT_REG_QUAD_RATE               = 0x3b,
++
++      JBT_REG_POWER_ON_OFF            = 0xb0,
++      JBT_REG_BOOSTER_OP              = 0xb1,
++      JBT_REG_BOOSTER_MODE            = 0xb2,
++      JBT_REG_BOOSTER_FREQ            = 0xb3,
++      JBT_REG_OPAMP_SYSCLK            = 0xb4,
++      JBT_REG_VSC_VOLTAGE             = 0xb5,
++      JBT_REG_VCOM_VOLTAGE            = 0xb6,
++      JBT_REG_EXT_DISPL               = 0xb7,
++      JBT_REG_OUTPUT_CONTROL          = 0xb8,
++      JBT_REG_DCCLK_DCEV              = 0xb9,
++      JBT_REG_DISPLAY_MODE1           = 0xba,
++      JBT_REG_DISPLAY_MODE2           = 0xbb,
++      JBT_REG_DISPLAY_MODE            = 0xbc,
++      JBT_REG_ASW_SLEW                = 0xbd,
++      JBT_REG_DUMMY_DISPLAY           = 0xbe,
++      JBT_REG_DRIVE_SYSTEM            = 0xbf,
++
++      JBT_REG_SLEEP_OUT_FR_A          = 0xc0,
++      JBT_REG_SLEEP_OUT_FR_B          = 0xc1,
++      JBT_REG_SLEEP_OUT_FR_C          = 0xc2,
++      JBT_REG_SLEEP_IN_LCCNT_D        = 0xc3,
++      JBT_REG_SLEEP_IN_LCCNT_E        = 0xc4,
++      JBT_REG_SLEEP_IN_LCCNT_F        = 0xc5,
++      JBT_REG_SLEEP_IN_LCCNT_G        = 0xc6,
++
++      JBT_REG_GAMMA1_FINE_1           = 0xc7,
++      JBT_REG_GAMMA1_FINE_2           = 0xc8,
++      JBT_REG_GAMMA1_INCLINATION      = 0xc9,
++      JBT_REG_GAMMA1_BLUE_OFFSET      = 0xca,
++
++      /* VGA */
++      JBT_REG_BLANK_CONTROL           = 0xcf,
++      JBT_REG_BLANK_TH_TV             = 0xd0,
++      JBT_REG_CKV_ON_OFF              = 0xd1,
++      JBT_REG_CKV_1_2                 = 0xd2,
++      JBT_REG_OEV_TIMING              = 0xd3,
++      JBT_REG_ASW_TIMING_1            = 0xd4,
++      JBT_REG_ASW_TIMING_2            = 0xd5,
++
++      /* QVGA */
++      JBT_REG_BLANK_CONTROL_QVGA      = 0xd6,
++      JBT_REG_BLANK_TH_TV_QVGA        = 0xd7,
++      JBT_REG_CKV_ON_OFF_QVGA         = 0xd8,
++      JBT_REG_CKV_1_2_QVGA            = 0xd9,
++      JBT_REG_OEV_TIMING_QVGA         = 0xde,
++      JBT_REG_ASW_TIMING_1_QVGA       = 0xdf,
++      JBT_REG_ASW_TIMING_2_QVGA       = 0xe0,
++
++
++      JBT_REG_HCLOCK_VGA              = 0xec,
++      JBT_REG_HCLOCK_QVGA             = 0xed,
++
++};
++
++enum jbt_state {
++      JBT_STATE_DEEP_STANDBY,
++      JBT_STATE_SLEEP,
++      JBT_STATE_NORMAL,
++      JBT_STATE_QVGA_NORMAL,
++};
++
++static const char *jbt_state_names[] = {
++      [JBT_STATE_DEEP_STANDBY]        = "deep-standby",
++      [JBT_STATE_SLEEP]               = "sleep",
++      [JBT_STATE_NORMAL]              = "normal",
++      [JBT_STATE_QVGA_NORMAL]         = "qvga-normal",
++};
++
++struct jbt_info {
++      enum jbt_state state, normal_state;
++      struct spi_device *spi_dev;
++      struct mutex lock;              /* protects tx_buf and reg_cache */
++      struct notifier_block fb_notif;
++      u16 tx_buf[8];
++      u16 reg_cache[0xEE];
++      struct timespec last_sleep;
++};
++
++#define JBT_COMMAND   0x000
++#define JBT_DATA      0x100
++
++static inline unsigned int timespec_sub_ms(struct timespec lhs,
++                                      struct timespec rhs)
++{
++      struct timespec ts = timespec_sub(lhs, rhs);
++      return (ts.tv_sec * MSEC_PER_SEC) + (ts.tv_nsec / NSEC_PER_MSEC);
++}
++
++static int jbt_reg_write_nodata(struct jbt_info *jbt, u8 reg)
++{
++      int rc;
++
++      jbt->tx_buf[0] = JBT_COMMAND | reg;
++      rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++                     1*sizeof(u16));
++      if (rc == 0)
++              jbt->reg_cache[reg] = 0;
++      else
++              printk(KERN_ERR"jbt_reg_write_nodata spi_write ret %d\n",
++                     rc);
++
++      return rc;
++}
++
++
++static int jbt_reg_write(struct jbt_info *jbt, u8 reg, u8 data)
++{
++      int rc;
++
++      jbt->tx_buf[0] = JBT_COMMAND | reg;
++      jbt->tx_buf[1] = JBT_DATA | data;
++      rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++                     2*sizeof(u16));
++      if (rc == 0)
++              jbt->reg_cache[reg] = data;
++      else
++              printk(KERN_ERR"jbt_reg_write spi_write ret %d\n", rc);
++
++      return rc;
++}
++
++static int jbt_reg_write16(struct jbt_info *jbt, u8 reg, u16 data)
++{
++      int rc;
++
++      jbt->tx_buf[0] = JBT_COMMAND | reg;
++      jbt->tx_buf[1] = JBT_DATA | (data >> 8);
++      jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
++
++      rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
++                     3*sizeof(u16));
++      if (rc == 0)
++              jbt->reg_cache[reg] = data;
++      else
++              printk(KERN_ERR"jbt_reg_write16 spi_write ret %d\n", rc);
++
++      return rc;
++}
++
++static int jbt_init_regs(struct jbt_info *jbt)
++{
++      int rc;
++
++      dev_dbg(&jbt->spi_dev->dev, "entering %cVGA mode\n",
++                      jbt->normal_state == JBT_STATE_QVGA_NORMAL ? 'Q' : ' ');
++
++      rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
++      rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
++      rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
++      rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
++      rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
++      rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
++      rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
++      rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
++      rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
++      rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
++      rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
++      rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
++      /*
++       * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
++       * to avoid red / blue flicker
++       */
++      rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x04);
++      rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
++
++      rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
++      rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
++      rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
++      rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
++      rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
++      rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
++      rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
++
++      rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
++      rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
++      rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
++      rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
++
++      if (jbt->normal_state != JBT_STATE_QVGA_NORMAL) {
++              rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
++              rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
++              rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
++
++              rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
++              rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
++
++              rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
++              rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
++              rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
++      } else {
++              rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
++              rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
++              rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
++
++              rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
++              rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
++
++              rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
++              rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
++              rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
++      }
++
++      return rc ? -EIO : 0;
++}
++
++static int standby_to_sleep(struct jbt_info *jbt)
++{
++      int rc;
++
++      /* three times command zero */
++      rc = jbt_reg_write_nodata(jbt, 0x00);
++      mdelay(1);
++      rc |= jbt_reg_write_nodata(jbt, 0x00);
++      mdelay(1);
++      rc |= jbt_reg_write_nodata(jbt, 0x00);
++      mdelay(1);
++
++      /* deep standby out */
++      rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
++      mdelay(1);
++      rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
++
++      /* (re)initialize register set */
++      rc |= jbt_init_regs(jbt);
++
++      return rc ? -EIO : 0;
++}
++
++static int sleep_to_normal(struct jbt_info *jbt)
++{
++      int rc;
++
++      /* Make sure we are 120 ms after SLEEP_OUT */
++      unsigned int sleep_time = timespec_sub_ms(current_kernel_time(),
++                                                      jbt->last_sleep);
++      if (sleep_time < 120)
++              mdelay(120 - sleep_time);
++
++      if (jbt->normal_state == JBT_STATE_NORMAL) {
++              /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++              rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
++
++              /* Quad mode off */
++              rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
++      } else {
++              /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
++              rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
++
++              /* Quad mode on */
++              rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
++      }
++
++      /* AVDD on, XVDD on */
++      rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
++
++      /* Output control */
++      rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
++
++      /* Turn on display */
++      rc |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
++
++      /* Sleep mode off */
++      rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
++      jbt->last_sleep = current_kernel_time();
++
++      /* Allow the booster and display controller to restart stably */
++      mdelay(5);
++
++      return rc ? -EIO : 0;
++}
++
++static int normal_to_sleep(struct jbt_info *jbt)
++{
++      int rc;
++
++      /* Make sure we are 120 ms after SLEEP_OUT */
++      unsigned int sleep_time = timespec_sub_ms(current_kernel_time(),
++                                                      jbt->last_sleep);
++      if (sleep_time < 120)
++              mdelay(120 - sleep_time);
++
++      rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
++      rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
++      rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
++      jbt->last_sleep = current_kernel_time();
++
++      /* Allow the internal circuits to stop automatically */
++      mdelay(5);
++
++      return rc ? -EIO : 0;
++}
++
++static int sleep_to_standby(struct jbt_info *jbt)
++{
++      return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
++}
++
++/* frontend function */
++int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state)
++{
++      int rc = -EINVAL;
++
++      dev_dbg(&jbt->spi_dev->dev, "entering (old_state=%s, new_state=%s)\n",
++                      jbt_state_names[jbt->state],
++                      jbt_state_names[new_state]);
++
++      mutex_lock(&jbt->lock);
++
++      if (new_state == JBT_STATE_NORMAL ||
++                      new_state == JBT_STATE_QVGA_NORMAL)
++              jbt->normal_state = new_state;
++
++      switch (jbt->state) {
++      case JBT_STATE_DEEP_STANDBY:
++              switch (new_state) {
++              case JBT_STATE_DEEP_STANDBY:
++                      rc = 0;
++                      break;
++              case JBT_STATE_SLEEP:
++                      rc = standby_to_sleep(jbt);
++                      break;
++              case JBT_STATE_NORMAL:
++                      /* first transition into sleep */
++                      rc = standby_to_sleep(jbt);
++                      /* then transition into normal */
++                      rc |= sleep_to_normal(jbt);
++                      break;
++              case JBT_STATE_QVGA_NORMAL:
++                      /* first transition into sleep */
++                      rc = standby_to_sleep(jbt);
++                      /* then transition into normal */
++                      rc |= sleep_to_normal(jbt);
++                      break;
++              }
++              break;
++      case JBT_STATE_SLEEP:
++              switch (new_state) {
++              case JBT_STATE_SLEEP:
++                      rc = 0;
++                      break;
++              case JBT_STATE_DEEP_STANDBY:
++                      rc = sleep_to_standby(jbt);
++                      break;
++              case JBT_STATE_NORMAL:
++              case JBT_STATE_QVGA_NORMAL:
++                      rc = sleep_to_normal(jbt);
++                      break;
++              }
++              break;
++      case JBT_STATE_NORMAL:
++              switch (new_state) {
++              case JBT_STATE_NORMAL:
++                      rc = 0;
++                      break;
++              case JBT_STATE_DEEP_STANDBY:
++                      /* first transition into sleep */
++                      rc = normal_to_sleep(jbt);
++                      /* then transition into deep standby */
++                      rc |= sleep_to_standby(jbt);
++                      break;
++              case JBT_STATE_SLEEP:
++                      rc = normal_to_sleep(jbt);
++                      break;
++              case JBT_STATE_QVGA_NORMAL:
++                      /* first transition into sleep */
++                      rc = normal_to_sleep(jbt);
++                      /* second transition into deep standby */
++                      rc |= sleep_to_standby(jbt);
++                      /* third transition into sleep */
++                      rc |= standby_to_sleep(jbt);
++                      /* fourth transition into normal */
++                      rc |= sleep_to_normal(jbt);
++                      break;
++              }
++              break;
++      case JBT_STATE_QVGA_NORMAL:
++              switch (new_state) {
++              case JBT_STATE_QVGA_NORMAL:
++                      rc = 0;
++                      break;
++              case JBT_STATE_DEEP_STANDBY:
++                      /* first transition into sleep */
++                      rc = normal_to_sleep(jbt);
++                      /* then transition into deep standby */
++                      rc |= sleep_to_standby(jbt);
++                      break;
++              case JBT_STATE_SLEEP:
++                      rc = normal_to_sleep(jbt);
++                      break;
++              case JBT_STATE_NORMAL:
++                      /* first transition into sleep */
++                      rc = normal_to_sleep(jbt);
++                      /* second transition into deep standby */
++                      rc |= sleep_to_standby(jbt);
++                      /* third transition into sleep */
++                      rc |= standby_to_sleep(jbt);
++                      /* fourth transition into normal */
++                      rc |= sleep_to_normal(jbt);
++                      break;
++              }
++              break;
++      }
++
++      if (rc == 0)
++              jbt->state = new_state;
++      else
++              dev_err(&jbt->spi_dev->dev, "Failed enter state '%s')\n",
++                              jbt_state_names[new_state]);
++
++      mutex_unlock(&jbt->lock);
++
++      return rc;
++}
++EXPORT_SYMBOL_GPL(jbt6k74_enter_state);
++
++static ssize_t state_read(struct device *dev, struct device_attribute *attr,
++                        char *buf)
++{
++      struct jbt_info *jbt = dev_get_drvdata(dev);
++
++      if (jbt->state >= ARRAY_SIZE(jbt_state_names))
++              return -EIO;
++
++      return sprintf(buf, "%s\n", jbt_state_names[jbt->state]);
++}
++
++static ssize_t state_write(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct jbt_info *jbt = dev_get_drvdata(dev);
++      int i, rc;
++
++      for (i = 0; i < ARRAY_SIZE(jbt_state_names); i++) {
++              if (!strncmp(buf, jbt_state_names[i],
++                           strlen(jbt_state_names[i]))) {
++                      rc = jbt6k74_enter_state(jbt, i);
++                      if (rc)
++                              return rc;
++                      return count;
++              }
++      }
++
++      return -EINVAL;
++}
++
++static DEVICE_ATTR(state, 0644, state_read, state_write);
++
++static int reg_by_string(const char *name)
++{
++      if (!strcmp(name, "gamma_fine1"))
++              return JBT_REG_GAMMA1_FINE_1;
++      else if (!strcmp(name, "gamma_fine2"))
++              return JBT_REG_GAMMA1_FINE_2;
++      else if (!strcmp(name, "gamma_inclination"))
++              return JBT_REG_GAMMA1_INCLINATION;
++      else
++              return JBT_REG_GAMMA1_BLUE_OFFSET;
++}
++
++static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
++                        char *buf)
++{
++      struct jbt_info *jbt = dev_get_drvdata(dev);
++      int reg = reg_by_string(attr->attr.name);
++      u16 val;
++
++      mutex_lock(&jbt->lock);
++      val = jbt->reg_cache[reg];
++      mutex_unlock(&jbt->lock);
++
++      return sprintf(buf, "0x%04x\n", val);
++}
++
++static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      struct jbt_info *jbt = dev_get_drvdata(dev);
++      int reg = reg_by_string(attr->attr.name);
++      unsigned long val = simple_strtoul(buf, NULL, 10);
++
++      dev_info(dev, "writing gama %lu\n", val & 0xff);
++
++      mutex_lock(&jbt->lock);
++      jbt_reg_write(jbt, reg, val & 0xff);
++      mutex_unlock(&jbt->lock);
++
++      return count;
++}
++
++static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
++                         const char *buf, size_t count)
++{
++      int rc;
++      struct jbt_info *jbt = dev_get_drvdata(dev);
++      struct jbt6k74_platform_data *pdata = jbt->spi_dev->dev.platform_data;
++
++      dev_info(dev, "reset\n");
++
++      mutex_lock(&jbt->lock);
++
++      jbt->state = JBT_STATE_DEEP_STANDBY;
++
++      /* hard reset the jbt6k74 */
++      (pdata->reset)(0, 0);
++      mdelay(1);
++      (pdata->reset)(0, 1);
++      mdelay(120);
++
++      rc = jbt_reg_write_nodata(jbt, 0x01);
++      if (rc < 0)
++              dev_err(&jbt->spi_dev->dev, "cannot soft reset\n");
++      mdelay(120);
++
++      mutex_unlock(&jbt->lock);
++
++      jbt6k74_enter_state(jbt, jbt->normal_state);
++
++      return count;
++}
++
++static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
++static DEVICE_ATTR(reset, 0600, NULL, reset_write);
++
++static struct attribute *jbt_sysfs_entries[] = {
++      &dev_attr_state.attr,
++      &dev_attr_gamma_fine1.attr,
++      &dev_attr_gamma_fine2.attr,
++      &dev_attr_gamma_inclination.attr,
++      &dev_attr_gamma_blue_offset.attr,
++      &dev_attr_reset.attr,
++      NULL,
++};
++
++static struct attribute_group jbt_attr_group = {
++      .name   = NULL,
++      .attrs  = jbt_sysfs_entries,
++};
++
++static int fb_notifier_callback(struct notifier_block *self,
++                              unsigned long event, void *data)
++{
++      struct jbt_info *jbt;
++      struct fb_event *evdata = data;
++      int fb_blank;
++
++      jbt = container_of(self, struct jbt_info, fb_notif);
++
++      dev_dbg(&jbt->spi_dev->dev, "event=%lu\n", event);
++
++      if (event != FB_EVENT_BLANK && event != FB_EVENT_CONBLANK)
++              return 0;
++
++      fb_blank = *(int *)evdata->data;
++      switch (fb_blank) {
++      case FB_BLANK_UNBLANK:
++              dev_dbg(&jbt->spi_dev->dev, "unblank\n");
++              jbt6k74_enter_state(jbt, jbt->normal_state);
++              break;
++      case FB_BLANK_NORMAL:
++              dev_dbg(&jbt->spi_dev->dev, "blank\n");
++              break;
++      case FB_BLANK_VSYNC_SUSPEND:
++              dev_dbg(&jbt->spi_dev->dev, "vsync suspend\n");
++              break;
++      case FB_BLANK_HSYNC_SUSPEND:
++              dev_dbg(&jbt->spi_dev->dev, "hsync suspend\n");
++              break;
++      case FB_BLANK_POWERDOWN:
++              dev_dbg(&jbt->spi_dev->dev, "powerdown\n");
++              jbt6k74_enter_state(jbt, JBT_STATE_SLEEP);
++              break;
++      }
++
++      return 0;
++}
++
++/* linux device model infrastructure */
++
++static int __devinit jbt_probe(struct spi_device *spi)
++{
++      int rc;
++      struct jbt_info *jbt;
++      struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
++
++      /* the controller doesn't have a MISO pin; we can't do detection */
++
++      spi->mode = SPI_CPOL | SPI_CPHA;
++      spi->bits_per_word = 9;
++
++      rc = spi_setup(spi);
++      if (rc < 0) {
++              dev_err(&spi->dev,
++                      "error during spi_setup of jbt6k74 driver\n");
++              return rc;
++      }
++
++      jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
++      if (!jbt)
++              return -ENOMEM;
++
++      jbt->spi_dev = spi;
++      jbt->normal_state = JBT_STATE_NORMAL;
++      jbt->state = JBT_STATE_DEEP_STANDBY;
++      jbt->last_sleep = current_kernel_time();
++      mutex_init(&jbt->lock);
++
++      dev_set_drvdata(&spi->dev, jbt);
++
++      rc = jbt6k74_enter_state(jbt, JBT_STATE_NORMAL);
++      if (rc < 0) {
++              dev_err(&spi->dev, "cannot enter NORMAL state\n");
++              goto err_free_drvdata;
++      }
++
++      rc = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
++      if (rc < 0) {
++              dev_err(&spi->dev, "cannot create sysfs group\n");
++              goto err_standby;
++      }
++
++      jbt->fb_notif.notifier_call = fb_notifier_callback;
++      rc = fb_register_client(&jbt->fb_notif);
++      if (rc < 0) {
++              dev_err(&spi->dev, "cannot register notifier\n");
++              goto err_sysfs;
++      }
++
++      if (pdata->probe_completed)
++              (pdata->probe_completed)(&spi->dev);
++
++      return 0;
++
++err_sysfs:
++      sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
++err_standby:
++      jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
++err_free_drvdata:
++      dev_set_drvdata(&spi->dev, NULL);
++      kfree(jbt);
++
++      return rc;
++}
++
++static int __devexit jbt_remove(struct spi_device *spi)
++{
++      struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++
++      /* We don't want to switch off the display in case the user
++       * accidentially onloads the module (whose use count normally is 0) */
++      jbt6k74_enter_state(jbt, jbt->normal_state);
++
++      fb_unregister_client(&jbt->fb_notif);
++      sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
++      dev_set_drvdata(&spi->dev, NULL);
++      kfree(jbt);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int jbt_suspend(struct spi_device *spi, pm_message_t state)
++{
++      struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++
++      jbt6k74_enter_state(jbt, JBT_STATE_DEEP_STANDBY);
++
++      dev_info(&spi->dev, "suspended\n");
++
++      return 0;
++}
++
++int jbt6k74_resume(struct spi_device *spi)
++{
++      struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
++      struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
++
++      jbt6k74_enter_state(jbt, jbt->normal_state);
++
++      if (pdata->resuming)
++              (pdata->resuming)(0);
++
++      dev_info(&spi->dev, "resumed\n");
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(jbt6k74_resume);
++
++#else
++#define jbt_suspend   NULL
++#define jbt6k74_resume        NULL
++#endif
++
++static struct spi_driver jbt6k74_driver = {
++      .driver = {
++              .name   = "jbt6k74",
++              .owner  = THIS_MODULE,
++      },
++
++      .probe   = jbt_probe,
++      .remove  = __devexit_p(jbt_remove),
++      .suspend = jbt_suspend,
++      .resume  = jbt6k74_resume,
++};
++
++static int __init jbt_init(void)
++{
++      return spi_register_driver(&jbt6k74_driver);
++}
++
++static void __exit jbt_exit(void)
++{
++      spi_unregister_driver(&jbt6k74_driver);
++}
++
++MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(jbt_init);
++module_exit(jbt_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/display/Kconfig linux-2.6.29-rc3.owrt.om/drivers/video/display/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/video/display/Kconfig        2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/display/Kconfig     2009-05-10 22:28:00.000000000 +0200
+@@ -21,4 +21,23 @@
+ comment "Display hardware drivers"
+       depends on DISPLAY_SUPPORT
++config DISPLAY_JBT6K74
++      tristate "TPO JBT6K74-AS TFT display ASIC control interface"
++      depends on SPI_MASTER && SYSFS
++      help
++        SPI driver for the control interface of TFT panels containing
++        the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
++        TFT diplay module used in the FIC/Openmoko Neo1973 GSM phones.
++
++        The control interface is required for display operation, as it
++        controls power management, display timing and gamma calibration.
++
++config DISPLAY_L1K002
++      tristate "TP0 L1K0-02 TFT ASIC control interface"
++      depends on SPI_MASTER && SYSFS
++      help
++        The control interface of this LTPS TFT panel is based on SPI bitbang driver.
++        It controls display timing and gamma calibration. TP0 LPJ028T007A LCM uses this IC
++        as its controller in the Openmoko GTA03 GSM phone.
++
+ endmenu
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/display/l1k002.c linux-2.6.29-rc3.owrt.om/drivers/video/display/l1k002.c
+--- linux-2.6.29-rc3.owrt/drivers/video/display/l1k002.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/video/display/l1k002.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,278 @@
++/*
++ *  Copyright (C) 2009 Openmoko, Inc.
++ *
++ *  Author: Matt Hsu <matt_hsu@openmoko.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or (at
++ *  your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful, but
++ *  WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ *  General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
++ *
++*/
++
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <linux/l1k002.h>
++
++struct l1k002_data {
++      struct spi_device *spi;
++      struct mutex lock;
++      u8 mosi_buf[2];
++      u8 reg_cache[0x40];
++};
++
++enum l1k002_regs_table {
++
++      L1K002_REG_SYNCP_SEL            = 0x02,
++      L1K002_REG_VSTS                 = 0x03,
++      L1K002_REG_HSTS                 = 0x04,
++      L1K002_REG_MISC                 = 0x07,
++      L1K002_REG_CMDR                 = 0x08,
++      L1K002_REG_IN_DATA_TIMING       = 0x09,
++      L1K002_REG_ENGR_OTP             = 0x0b,
++      L1K002_REG_VGLS                 = 0x0c,
++      L1K002_REG_DISP_8_9             = 0x0d,
++      L1K002_REG_DISP_0_7             = 0x0e,
++      L1K002_REG_HTOTAL_8_10          = 0x0f,
++      L1K002_REG_HTOTAL_0_7           = 0x10,
++      L1K002_REG_WCKH                 = 0x20,
++      L1K002_REG_GCKH                 = 0x21,
++      L1K002_REG_DCKH                 = 0x22,
++      L1K002_REG_WENBV                = 0x23,
++      L1K002_REG_DCKV                 = 0x25,
++      L1K002_REG_WCKV                 = 0x27,
++      L1K002_REG_DA_VCOM              = 0x2a,
++      L1K002_REG_PVH                  = 0x2b,
++      L1K002_REG_NVH_NVL              = 0x2c,
++      L1K002_REG_GC1                  = 0x2d,
++      L1K002_REG_GC2                  = 0x2e,
++      L1K002_REG_GC3                  = 0x2f,
++      L1K002_REG_GC4                  = 0x30,
++      L1K002_REG_GC5                  = 0x31,
++      L1K002_REG_GC6                  = 0x32,
++      L1K002_REG_GC7                  = 0x33,
++      L1K002_REG_GC8                  = 0x34,
++      L1K002_REG_GC9                  = 0x35,
++      L1K002_REG_GC10                 = 0x36,
++      L1K002_REG_GC11                 = 0x37,
++      L1K002_REG_GC12                 = 0x38,
++      L1K002_REG_GC13                 = 0x39,
++      L1K002_REG_GC14                 = 0x3a,
++      L1K002_REG_GC15                 = 0x3b,
++};
++
++static int l1k002_reg_write(struct l1k002_data *l1k002, u8 reg, u8 data)
++{
++      int ret;
++
++      mutex_lock(&l1k002->lock);
++
++      l1k002->mosi_buf[0] = reg;
++      l1k002->mosi_buf[1] = data;
++
++      ret = spi_write(l1k002->spi, (u8 *)l1k002->mosi_buf, 2*sizeof(u8));
++      if (ret == 0)
++              l1k002->reg_cache[reg] = data;
++      else
++              dev_err(&l1k002->spi->dev, "reg spi_write ret: %d\n", ret);
++
++      mutex_unlock(&l1k002->lock);
++      return ret;
++}
++
++static int l1k002_init_reg(struct l1k002_data *l1k002)
++{
++      int ret;
++
++      /* software reset */
++      ret = l1k002_reg_write(l1k002, L1K002_REG_CMDR, 0x01);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_CMDR, 0x00);
++
++      /* setup color mode and direction */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_MISC, 0xd9);
++
++      /* dclk initial */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_SYNCP_SEL, 0x00);
++
++      /* start vertical data */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_VSTS, 0x04);
++
++      /* start horizonal data */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_HSTS, 0x14);
++
++      /* setup hsnc, vsnc, data_enable */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_IN_DATA_TIMING, 0x03);
++      /* enable engineering mode and OTP */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_ENGR_OTP, 0x18);
++
++      /* display area */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_VGLS, 0x41);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_DISP_8_9, 0x02);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_DISP_0_7, 0x80);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_HTOTAL_8_10, 0x02);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_HTOTAL_0_7, 0x08);
++
++      /* CKH pulse config */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_WCKH, 0x3c);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GCKH, 0x0c);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_DCKH, 0x10);
++
++      /* ENBV config */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_WENBV, 0x38);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_DCKV, 0x3c);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_WCKV, 0xdb);
++
++      /* driving voltage */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_DA_VCOM, 0x66);
++
++      /* gamma output voltage level */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_PVH, 0x70);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_NVH_NVL, 0x70);
++
++      /* gamma correction */
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC1, 0x15);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC2, 0xaa);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC3, 0xbf);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC4, 0x86);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC5, 0x11);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC6, 0x5e);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC7, 0xb6);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC8, 0x16);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC9, 0x4e);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC10, 0x78);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC11, 0xbf);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC12, 0xec);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC13, 0x10);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC14, 0x30);
++      ret |= l1k002_reg_write(l1k002, L1K002_REG_GC15, 0xff);
++
++      ret |= l1k002_reg_write(l1k002, 0x07, 0xc9);
++
++      if (ret == 0)
++              dev_info(&l1k002->spi->dev, "initialize OK \n");
++      else
++              dev_err(&l1k002->spi->dev, "initialize failed ret: %d\n", ret);
++      return ret;
++}
++
++static int l1k002_probe(struct spi_device *spi)
++{
++      int ret;
++      struct l1k002_data *l1k002;
++      struct l1k002_platform_data *l1k002_pdata = spi->dev.platform_data;
++
++      if (l1k002_pdata == NULL) {
++              dev_err(&spi->dev,
++                      "no platform data available \n");
++              return -EINVAL;
++      }
++
++      spi->mode = SPI_CPOL | SPI_CPHA;
++      spi->bits_per_word = 8;
++
++      ret = spi_setup(spi);
++      if (ret < 0) {
++              dev_err(&spi->dev,
++                      "error during spi_setup of l1k002 driver\n");
++              return ret;
++      }
++
++      l1k002 = kzalloc(sizeof(*l1k002), GFP_KERNEL);
++      if (!l1k002)
++              return -ENOMEM;
++
++      l1k002->spi = spi;
++      dev_set_drvdata(&spi->dev, l1k002);
++
++      mutex_init(&l1k002->lock);
++
++      /* hard reset l1k002 */
++      (l1k002_pdata->pwr_onoff)(1);
++
++      ret = l1k002_init_reg(l1k002);
++      if (ret)
++              goto err_free;
++
++      /* FIXME: sysfs should be added here */
++
++      return 0;
++
++err_free:
++      kfree(l1k002);
++      return ret;
++}
++
++static int __devexit l1k002_remove(struct spi_device *spi)
++{
++      struct l1k002 *l1k002 = dev_get_drvdata(&spi->dev);
++
++      dev_set_drvdata(&spi->dev, NULL);
++      kfree(l1k002);
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int l1k002_suspend(struct spi_device *spi, pm_message_t state)
++{
++      struct l1k002_platform_data *l1k002_pdata = spi->dev.platform_data;
++
++      /* l1k002 doesn't have sleep mode
++       * it should be powered down as entering suspend state
++       */
++      (l1k002_pdata->pwr_onoff)(0);
++      return 0;
++}
++
++static int l1k002_resume(struct spi_device *spi)
++{
++      struct l1k002_platform_data *l1k002_pdata = spi->dev.platform_data;
++      struct l1k002_data *l1k002 = dev_get_drvdata(&spi->dev);
++
++      (l1k002_pdata->pwr_onoff)(1);
++      return l1k002_init_reg(l1k002);
++}
++#else
++#define l1k002_suspend        NULL
++#define l1k002_resume         NULL
++#endif
++
++static struct spi_driver l1k002_driver = {
++      .driver = {
++              .name   = "l1k002",
++              .owner  = THIS_MODULE,
++      },
++
++      .probe   = l1k002_probe,
++      .remove  = __devexit_p(l1k002_remove),
++      .suspend = l1k002_suspend,
++      .resume  = l1k002_resume,
++};
++
++static int __init l1k002_init(void)
++{
++      return spi_register_driver(&l1k002_driver);
++}
++
++static void __exit l1k002_exit(void)
++{
++      spi_unregister_driver(&l1k002_driver);
++}
++
++MODULE_AUTHOR("Matt Hsu <matt_hsu@openmoko.org>");
++MODULE_LICENSE("GPL v2");
++
++module_init(l1k002_init);
++module_exit(l1k002_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/display/Makefile linux-2.6.29-rc3.owrt.om/drivers/video/display/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/video/display/Makefile       2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/display/Makefile    2009-05-10 22:28:00.000000000 +0200
+@@ -3,4 +3,6 @@
+ display-objs                          := display-sysfs.o
+ obj-$(CONFIG_DISPLAY_SUPPORT)         += display.o
++obj-$(CONFIG_DISPLAY_JBT6K74)         += jbt6k74.o
++obj-$(CONFIG_DISPLAY_L1K002)          += l1k002.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/Kconfig linux-2.6.29-rc3.owrt.om/drivers/video/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/video/Kconfig        2009-05-10 22:08:45.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/Kconfig     2009-05-10 22:28:00.000000000 +0200
+@@ -1924,6 +1924,30 @@
+       depends on FB_TMIO
+       default y
++config FB_S3C
++      tristate "Samsung S3C framebuffer support"
++      depends on FB && ARCH_S3C64XX
++      select FB_CFB_FILLRECT
++      select FB_CFB_COPYAREA
++      select FB_CFB_IMAGEBLIT
++      ---help---
++        Frame buffer driver for the built-in FB controller in the Samsung
++        SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
++        and the S3C64XX series such as the S3C6400 and S3C6410.
++
++        These chips all have the same basic framebuffer design with the
++        actual capabilities depending on the chip. For instance the S3C6400
++        and S3C6410 support 4 hardware windows whereas the S3C24XX series
++        currently only have two.
++
++        Currently the support is only for the S3C6400 and S3C6410 SoCs.
++
++config FB_S3C_DEBUG_REGWRITE
++       bool "Debug register writes"
++       depends on FB_S3C
++       ---help---
++         Show all register writes via printk(KERN_DEBUG)
++
+ config FB_S3C2410
+       tristate "S3C2410 LCD framebuffer support"
+       depends on FB && ARCH_S3C2410
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/logo/Kconfig linux-2.6.29-rc3.owrt.om/drivers/video/logo/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/video/logo/Kconfig   2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/logo/Kconfig        2009-05-10 22:28:00.000000000 +0200
+@@ -77,6 +77,11 @@
+       depends on SUPERH
+       default y
++config LOGO_OPENMOKO_CLUT224
++      bool "224-color Openmoko Linux logo"
++      depends on MACH_NEO1973_GTA01 || MACH_NEO1973_GTA02
++      default y
++
+ config LOGO_M32R_CLUT224
+       bool "224-color M32R Linux logo"
+       depends on M32R
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/logo/logo.c linux-2.6.29-rc3.owrt.om/drivers/video/logo/logo.c
+--- linux-2.6.29-rc3.owrt/drivers/video/logo/logo.c    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/logo/logo.c 2009-05-10 22:28:00.000000000 +0200
+@@ -35,6 +35,7 @@
+ extern const struct linux_logo logo_superh_vga16;
+ extern const struct linux_logo logo_superh_clut224;
+ extern const struct linux_logo logo_m32r_clut224;
++extern const struct linux_logo logo_openmoko_clut224;
+ static int nologo;
+ module_param(nologo, bool, 0);
+@@ -115,6 +116,10 @@
+               /* M32R Linux logo */
+               logo = &logo_m32r_clut224;
+ #endif
++#ifdef CONFIG_LOGO_OPENMOKO_CLUT224
++              /* Openmoko Linux logo */
++              logo = &logo_openmoko_clut224;
++#endif
+       }
+       return logo;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/logo/Makefile linux-2.6.29-rc3.owrt.om/drivers/video/logo/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/video/logo/Makefile  2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/logo/Makefile       2009-05-10 22:28:00.000000000 +0200
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_LOGO_SUPERH_VGA16)               += logo_superh_vga16.o
+ obj-$(CONFIG_LOGO_SUPERH_CLUT224)     += logo_superh_clut224.o
+ obj-$(CONFIG_LOGO_M32R_CLUT224)               += logo_m32r_clut224.o
++obj-$(CONFIG_LOGO_OPENMOKO_CLUT224)   += logo_openmoko_clut224.o
+ obj-$(CONFIG_SPU_BASE)                        += logo_spe_clut224.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/Makefile linux-2.6.29-rc3.owrt.om/drivers/video/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/video/Makefile       2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/Makefile    2009-05-10 22:28:00.000000000 +0200
+@@ -109,6 +109,7 @@
+ obj-$(CONFIG_FB_S1D13XXX)       += s1d13xxxfb.o
+ obj-$(CONFIG_FB_SH7760)                 += sh7760fb.o
+ obj-$(CONFIG_FB_IMX)              += imxfb.o
++obj-$(CONFIG_FB_S3C)            += s3c-fb.o
+ obj-$(CONFIG_FB_S3C2410)        += s3c2410fb.o
+ obj-$(CONFIG_FB_FSL_DIU)        += fsl-diu-fb.o
+ obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/s3c2410fb.c linux-2.6.29-rc3.owrt.om/drivers/video/s3c2410fb.c
+--- linux-2.6.29-rc3.owrt/drivers/video/s3c2410fb.c    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/video/s3c2410fb.c 2009-05-10 22:28:00.000000000 +0200
+@@ -1017,6 +1017,8 @@
+       s3c2410fb_init_registers(fbinfo);
++      s3c2410fb_set_par(fbinfo);
++
+       return 0;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/video/s3c-fb.c linux-2.6.29-rc3.owrt.om/drivers/video/s3c-fb.c
+--- linux-2.6.29-rc3.owrt/drivers/video/s3c-fb.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/video/s3c-fb.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,1036 @@
++/* linux/drivers/video/s3c-fb.c
++ *
++ * Copyright 2008 Openmoko Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * Samsung SoC Framebuffer driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/gfp.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/io.h>
++
++#include <mach/map.h>
++#include <mach/regs-fb.h>
++#include <plat/fb.h>
++
++/* This driver will export a number of framebuffer interfaces depending
++ * on the configuration passed in via the platform data. Each fb instance
++ * maps to a hardware window. Currently there is no support for runtime
++ * setting of the alpha-blending functions that each window has, so only
++ * window 0 is actually useful.
++ *
++ * Window 0 is treated specially, it is used for the basis of the LCD
++ * output timings and as the control for the output power-down state.
++*/
++
++/* note, some of the functions that get called are derived from including
++ * <mach/regs-fb.h> as they are specific to the architecture that the code
++ * is being built for.
++*/
++
++#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
++#undef writel
++#define writel(v, r) do { \
++      printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \
++      __raw_writel(v, r); } while(0)
++#endif /* FB_S3C_DEBUG_REGWRITE */
++
++struct s3c_fb;
++
++/**
++ * struct s3c_fb_win - per window private data for each framebuffer.
++ * @windata: The platform data supplied for the window configuration.
++ * @parent: The hardware that this window is part of.
++ * @fbinfo: Pointer pack to the framebuffer info for this window.
++ * @palette_buffer: Buffer/cache to hold palette entries.
++ * @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/
++ * @index: The window number of this window.
++ * @palette: The bitfields for changing r/g/b into a hardware palette entry.
++ */
++struct s3c_fb_win {
++      struct s3c_fb_pd_win    *windata;
++      struct s3c_fb           *parent;
++      struct fb_info          *fbinfo;
++      struct s3c_fb_palette    palette;
++
++      u32                     *palette_buffer;
++      u32                      pseudo_palette[16];
++      unsigned int             index;
++};
++
++/**
++ * struct s3c_fb - overall hardware state of the hardware
++ * @dev: The device that we bound to, for printing, etc.
++ * @regs_res: The resource we claimed for the IO registers.
++ * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
++ * @regs: The mapped hardware registers.
++ * @enabled: A bitmask of enabled hardware windows.
++ * @pdata: The platform configuration data passed with the device.
++ * @windows: The hardware windows that have been claimed.
++ */
++struct s3c_fb {
++      struct device           *dev;
++      struct resource         *regs_res;
++      struct clk              *bus_clk;
++      void __iomem            *regs;
++
++      unsigned char            enabled;
++
++      struct s3c_fb_platdata  *pdata;
++      struct s3c_fb_win       *windows[S3C_FB_MAX_WIN];
++};
++
++/**
++ * s3c_fb_win_has_palette() - determine if a mode has a palette
++ * @win: The window number being queried.
++ * @bpp: The number of bits per pixel to test.
++ *
++ * Work out if the given window supports palletised data at the specified bpp.
++ */
++static int s3c_fb_win_has_palette(unsigned int win, unsigned int bpp)
++{
++      return s3c_fb_win_pal_size(win) <= (1 << bpp);
++}
++
++/**
++ * s3c_fb_check_var() - framebuffer layer request to verify a given mode.
++ * @var: The screen information to verify.
++ * @info: The framebuffer device.
++ *
++ * Framebuffer layer call to verify the given information and allow us to
++ * update various information depending on the hardware capabilities.
++ */
++static int s3c_fb_check_var(struct fb_var_screeninfo *var,
++                          struct fb_info *info)
++{
++      struct s3c_fb_win *win = info->par;
++      struct s3c_fb_pd_win *windata = win->windata;
++      struct s3c_fb *sfb = win->parent;
++
++      dev_dbg(sfb->dev, "checking parameters\n");
++
++      var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
++      var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
++
++      if (!s3c_fb_validate_win_bpp(win->index, var->bits_per_pixel)) {
++              dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
++                      win->index, var->bits_per_pixel);
++              return -EINVAL;
++      }
++
++      /* always ensure these are zero, for drop through cases below */
++      var->transp.offset = 0;
++      var->transp.length = 0;
++
++      switch (var->bits_per_pixel) {
++      case 1:
++      case 2:
++      case 4:
++      case 8:
++              if (!s3c_fb_win_has_palette(win->index, var->bits_per_pixel)) {
++                      /* non palletised, A:1,R:2,G:3,B:2 mode */
++                      var->red.offset         = 4;
++                      var->green.offset       = 2;
++                      var->blue.offset        = 0;
++                      var->red.length         = 5;
++                      var->green.length       = 3;
++                      var->blue.length        = 2;
++                      var->transp.offset      = 7;
++                      var->transp.length      = 1;
++              } else {
++                      var->red.offset = 0;
++                      var->red.length = var->bits_per_pixel;
++                      var->green      = var->red;
++                      var->blue       = var->red;
++              }
++              break;
++
++      case 19:
++              /* 666 with one bit alpha/transparency */
++              var->transp.offset      = 18;
++              var->transp.length      = 1;
++      case 18:
++              var->bits_per_pixel     = 32;
++
++              /* 666 format */
++              var->red.offset         = 12;
++              var->green.offset       = 6;
++              var->blue.offset        = 0;
++              var->red.length         = 6;
++              var->green.length       = 6;
++              var->blue.length        = 6;
++              break;
++
++      case 16:
++              /* 16 bpp, 565 format */
++              var->red.offset         = 11;
++              var->green.offset       = 5;
++              var->blue.offset        = 0;
++              var->red.length         = 5;
++              var->green.length       = 6;
++              var->blue.length        = 5;
++              break;
++
++      case 28:
++      case 25:
++              var->transp.length      = var->bits_per_pixel - 24;
++              var->transp.offset      = 24;
++              /* drop through */
++      case 24:
++              /* our 24bpp is unpacked, so 32bpp */
++              var->bits_per_pixel     = 32;
++      case 32:
++              var->red.offset         = 16;
++              var->red.length         = 8;
++              var->green.offset       = 8;
++              var->green.length       = 8;
++              var->blue.offset        = 0;
++              var->blue.length        = 8;
++              break;
++
++      default:
++              dev_err(sfb->dev, "invalid bpp\n");
++      }
++
++      dev_dbg(sfb->dev, "%s: verified parameters\n", __func__);
++      return 0;
++}
++
++/**
++ * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
++ * @sfb: The hardware state.
++ * @pixclock: The pixel clock wanted, in picoseconds.
++ *
++ * Given the specified pixel clock, work out the necessary divider to get
++ * close to the output frequency.
++ */
++static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
++{
++      unsigned long clk = clk_get_rate(sfb->bus_clk);
++      unsigned long long tmp;
++      unsigned int result;
++
++      tmp = (unsigned long long)clk;
++      tmp *= pixclk;
++
++      do_div(tmp, 1000000000UL);
++      result = (unsigned int)tmp / 1000;
++
++      dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
++              pixclk, clk, result, clk / result);
++
++      return result;
++}
++
++/**
++ * s3c_fb_align_word() - align pixel count to word boundary
++ * @bpp: The number of bits per pixel
++ * @pix: The value to be aligned.
++ *
++ * Align the given pixel count so that it will start on an 32bit word
++ * boundary.
++ */
++static int s3c_fb_align_word(unsigned int bpp, unsigned int pix)
++{
++      int pix_per_word;
++
++      if (bpp > 16)
++              return pix;
++
++      pix_per_word = (8 * 32) / bpp;
++      return ALIGN(pix, pix_per_word);
++}
++
++/**
++ * s3c_fb_set_par() - framebuffer request to set new framebuffer state.
++ * @info: The framebuffer to change.
++ *
++ * Framebuffer layer request to set a new mode for the specified framebuffer
++ */
++static int s3c_fb_set_par(struct fb_info *info)
++{
++      struct fb_var_screeninfo *var = &info->var;
++      struct s3c_fb_win *win = info->par;
++      struct s3c_fb *sfb = win->parent;
++      void __iomem *regs = sfb->regs;
++      int win_no = win->index;
++      u32 data;
++      u32 pagewidth;
++      int clkdiv;
++
++      dev_dbg(sfb->dev, "setting framebuffer parameters\n");
++
++      switch (var->bits_per_pixel) {
++      case 32:
++      case 24:
++      case 16:
++      case 12:
++              info->fix.visual = FB_VISUAL_TRUECOLOR;
++              break;
++      case 8:
++              if (s3c_fb_win_has_palette(win_no, 8))
++                      info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++              else
++                      info->fix.visual = FB_VISUAL_TRUECOLOR;
++              break;
++      case 1:
++              info->fix.visual = FB_VISUAL_MONO01;
++              break;
++      default:
++              info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++              break;
++      }
++
++      info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
++
++      /* disable the window whilst we update it */
++      writel(0, regs + WINCON(win_no));
++
++      /* use window 0 as the basis for the lcd output timings */
++
++      if (win_no == 0) {
++              clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
++
++              data = sfb->pdata->vidcon0;
++              data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
++
++              if (clkdiv > 1)
++                      data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
++              else
++                      data &= ~VIDCON0_CLKDIR;        /* 1:1 clock */
++
++              /* write the timing data to the panel */
++
++              data |= VIDCON0_ENVID | VIDCON0_ENVID_F;
++              writel(data, regs + VIDCON0);
++
++              data = VIDTCON0_VBPD(var->upper_margin - 1) |
++                     VIDTCON0_VFPD(var->lower_margin - 1) |
++                     VIDTCON0_VSPW(var->vsync_len - 1);
++
++              writel(data, regs + VIDTCON0);
++
++              data = VIDTCON1_HBPD(var->left_margin - 1) |
++                     VIDTCON1_HFPD(var->right_margin - 1) |
++                     VIDTCON1_HSPW(var->hsync_len - 1);
++
++              writel(data, regs + VIDTCON1);
++
++              data = VIDTCON2_LINEVAL(var->yres - 1) |
++                     VIDTCON2_HOZVAL(var->xres - 1);
++              writel(data, regs + VIDTCON2);
++      }
++
++      /* write the buffer address */
++
++      writel(info->fix.smem_start, regs + VIDW_BUF_START(win_no));
++
++      data = info->fix.smem_start + info->fix.line_length * var->yres;
++      writel(data, regs + VIDW_BUF_END(win_no));
++
++      pagewidth = (var->xres * var->bits_per_pixel) >> 3;
++      data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
++             VIDW_BUF_SIZE_PAGEWIDTH(pagewidth);
++      writel(data, regs + VIDW_BUF_SIZE(win_no));
++
++      /* write 'OSD' registers to control position of framebuffer */
++
++      data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0);
++      writel(data, regs + VIDOSD_A(win_no));
++
++      data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
++                                                   var->xres - 1)) |
++             VIDOSDxB_BOTRIGHT_Y(var->yres - 1);
++
++      writel(data, regs + VIDOSD_B(win_no));
++
++      data = var->xres * var->yres;
++      if (s3c_fb_has_osd_d(win_no)) {
++              writel(data, regs + VIDOSD_D(win_no));
++              writel(0, regs + VIDOSD_C(win_no));
++      } else
++              writel(data, regs + VIDOSD_C(win_no));
++
++      data = WINCONx_ENWIN;
++
++      /* note, since we have to round up the bits-per-pixel, we end up
++       * relying on the bitfield information for r/g/b/a to work out
++       * exactly which mode of operation is intended. */
++
++      switch (var->bits_per_pixel) {
++      case 1:
++              data |= WINCON0_BPPMODE_1BPP;
++              data |= WINCONx_BITSWP;
++              data |= WINCONx_BURSTLEN_4WORD;
++              break;
++      case 2:
++              data |= WINCON0_BPPMODE_2BPP;
++              data |= WINCONx_BITSWP;
++              data |= WINCONx_BURSTLEN_8WORD;
++              break;
++      case 4:
++              data |= WINCON0_BPPMODE_4BPP;
++              data |= WINCONx_BITSWP;
++              data |= WINCONx_BURSTLEN_8WORD;
++              break;
++      case 8:
++              if (var->transp.length != 0)
++                      data |= WINCON1_BPPMODE_8BPP_1232;
++              else
++                      data |= WINCON0_BPPMODE_8BPP_PALETTE;
++              data |= WINCONx_BURSTLEN_8WORD;
++              data |= WINCONx_BYTSWP;
++              break;
++      case 16:
++              if (var->transp.length != 0)
++                      data |= WINCON1_BPPMODE_16BPP_A1555;
++              else
++                      data |= WINCON0_BPPMODE_16BPP_565;
++              data |= WINCONx_HAWSWP;
++              data |= WINCONx_BURSTLEN_16WORD;
++              break;
++      case 24:
++      case 32:
++              if (var->red.length == 6) {
++                      if (var->transp.length != 0)
++                              data |= WINCON1_BPPMODE_19BPP_A1666;
++                      else
++                              data |= WINCON1_BPPMODE_18BPP_666;
++              } else if (var->transp.length != 0)
++                      data |= WINCON1_BPPMODE_25BPP_A1888;
++              else
++                      data |= WINCON0_BPPMODE_24BPP_888;
++
++              data |= WINCONx_BURSTLEN_16WORD;
++              break;
++      }
++
++      writel(data, regs + WINCON(win_no));
++      writel(0x0, regs + WINxMAP(win_no));
++
++      return 0;
++}
++
++/**
++ * s3c_fb_update_palette() - set or schedule a palette update.
++ * @sfb: The hardware information.
++ * @win: The window being updated.
++ * @reg: The palette index being changed.
++ * @value: The computed palette value.
++ *
++ * Change the value of a palette register, either by directly writing to
++ * the palette (this requires the palette RAM to be disconnected from the
++ * hardware whilst this is in progress) or schedule the update for later.
++ *
++ * At the moment, since we have no VSYNC interrupt support, we simply set
++ * the palette entry directly.
++ */
++static void s3c_fb_update_palette(struct s3c_fb *sfb,
++                                struct s3c_fb_win *win,
++                                unsigned int reg,
++                                u32 value)
++{
++      void __iomem *palreg;
++      u32 palcon;
++
++      palreg = sfb->regs + s3c_fb_pal_reg(win->index, reg);
++
++      dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n",
++              __func__, win->index, reg, palreg, value);
++
++      win->palette_buffer[reg] = value;
++
++      palcon = readl(sfb->regs + WPALCON);
++      writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON);
++
++      if (s3c_fb_pal_is16(win->index))
++              writew(value, palreg);
++      else
++              writel(value, palreg);
++
++      writel(palcon, sfb->regs + WPALCON);
++}
++
++static inline unsigned int chan_to_field(unsigned int chan,
++                                       struct fb_bitfield *bf)
++{
++      chan &= 0xffff;
++      chan >>= 16 - bf->length;
++      return chan << bf->offset;
++}
++
++/**
++ * s3c_fb_setcolreg() - framebuffer layer request to change palette.
++ * @regno: The palette index to change.
++ * @red: The red field for the palette data.
++ * @green: The green field for the palette data.
++ * @blue: The blue field for the palette data.
++ * @trans: The transparency (alpha) field for the palette data.
++ * @info: The framebuffer being changed.
++ */
++static int s3c_fb_setcolreg(unsigned regno,
++                          unsigned red, unsigned green, unsigned blue,
++                          unsigned transp, struct fb_info *info)
++{
++      struct s3c_fb_win *win = info->par;
++      struct s3c_fb *sfb = win->parent;
++      unsigned int val;
++
++      dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n",
++              __func__, win->index, regno, red, green, blue);
++
++      switch (info->fix.visual) {
++      case FB_VISUAL_TRUECOLOR:
++              /* true-colour, use pseudo-palette */
++
++              if (regno < 16) {
++                      u32 *pal = info->pseudo_palette;
++
++                      val  = chan_to_field(red,   &info->var.red);
++                      val |= chan_to_field(green, &info->var.green);
++                      val |= chan_to_field(blue,  &info->var.blue);
++
++                      pal[regno] = val;
++              }
++              break;
++
++      case FB_VISUAL_PSEUDOCOLOR:
++              if (regno < s3c_fb_win_pal_size(win->index)) {
++                      val  = chan_to_field(red, &win->palette.r);
++                      val |= chan_to_field(green, &win->palette.g);
++                      val |= chan_to_field(blue, &win->palette.b);
++
++                      s3c_fb_update_palette(sfb, win, regno, val);
++              }
++
++              break;
++
++      default:
++              return 1;       /* unknown type */
++      }
++
++      return 0;
++}
++
++/**
++ * s3c_fb_enable() - Set the state of the main LCD output
++ * @sfb: The main framebuffer state.
++ * @enable: The state to set.
++ */
++static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
++{
++      u32 vidcon0 = readl(sfb->regs + VIDCON0);
++
++      if (enable)
++              vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
++      else {
++              /* see the note in the framebuffer datasheet about
++               * why you cannot take both of these bits down at the
++               * same time. */
++
++              if (!(vidcon0 & VIDCON0_ENVID))
++                      return;
++
++              vidcon0 |= VIDCON0_ENVID;
++              vidcon0 &= ~VIDCON0_ENVID_F;
++      }
++
++      writel(vidcon0, sfb->regs + VIDCON0);
++}
++
++/**
++ * s3c_fb_blank() - blank or unblank the given window
++ * @blank_mode: The blank state from FB_BLANK_*
++ * @info: The framebuffer to blank.
++ *
++ * Framebuffer layer request to change the power state.
++ */
++static int s3c_fb_blank(int blank_mode, struct fb_info *info)
++{
++      struct s3c_fb_win *win = info->par;
++      struct s3c_fb *sfb = win->parent;
++      unsigned int index = win->index;
++      u32 wincon;
++
++      dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
++
++      wincon = readl(sfb->regs + WINCON(index));
++
++      switch (blank_mode) {
++      case FB_BLANK_POWERDOWN:
++              wincon &= ~WINCONx_ENWIN;
++              sfb->enabled &= ~(1 << index);
++              /* fall through to FB_BLANK_NORMAL */
++
++      case FB_BLANK_NORMAL:
++              /* disable the DMA and display 0x0 (black) */
++              writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
++                     sfb->regs + WINxMAP(index));
++              break;
++
++      case FB_BLANK_UNBLANK:
++              writel(0x0, sfb->regs + WINxMAP(index));
++              wincon |= WINCONx_ENWIN;
++              sfb->enabled |= (1 << index);
++              break;
++
++      case FB_BLANK_VSYNC_SUSPEND:
++      case FB_BLANK_HSYNC_SUSPEND:
++      default:
++              return 1;
++      }
++
++      writel(wincon, sfb->regs + WINCON(index));
++
++      /* Check the enabled state to see if we need to be running the
++       * main LCD interface, as if there are no active windows then
++       * it is highly likely that we also do not need to output
++       * anything.
++       */
++
++      /* We could do something like the following code, but the current
++       * system of using framebuffer events means that we cannot make
++       * the distinction between just window 0 being inactive and all
++       * the windows being down.
++       *
++       * s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
++      */
++
++      /* we're stuck with this until we can do something about overriding
++       * the power control using the blanking event for a single fb.
++       */
++      if (index == 0)
++              s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0);
++
++      return 0;
++}
++
++static struct fb_ops s3c_fb_ops = {
++      .owner          = THIS_MODULE,
++      .fb_check_var   = s3c_fb_check_var,
++      .fb_set_par     = s3c_fb_set_par,
++      .fb_blank       = s3c_fb_blank,
++      .fb_setcolreg   = s3c_fb_setcolreg,
++      .fb_fillrect    = cfb_fillrect,
++      .fb_copyarea    = cfb_copyarea,
++      .fb_imageblit   = cfb_imageblit,
++};
++
++/**
++ * s3c_fb_alloc_memory() - allocate display memory for framebuffer window
++ * @sfb: The base resources for the hardware.
++ * @win: The window to initialise memory for.
++ *
++ * Allocate memory for the given framebuffer.
++ */
++static int __devinit s3c_fb_alloc_memory(struct s3c_fb *sfb,
++                                       struct s3c_fb_win *win)
++{
++      struct s3c_fb_pd_win *windata = win->windata;
++      unsigned int real_size, virt_size, size;
++      struct fb_info *fbi = win->fbinfo;
++      dma_addr_t map_dma;
++
++      dev_dbg(sfb->dev, "allocating memory for display\n");
++
++      real_size = windata->win_mode.xres * windata->win_mode.yres;
++      virt_size = windata->virtual_x * windata->virtual_y;
++
++      dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n",
++              real_size, windata->win_mode.xres, windata->win_mode.yres,
++              virt_size, windata->virtual_x, windata->virtual_y);
++
++      size = (real_size > virt_size) ? real_size : virt_size;
++      size *= (windata->max_bpp > 16) ? 32 : windata->max_bpp;
++      size /= 8;
++
++      fbi->fix.smem_len = size;
++      size = PAGE_ALIGN(size);
++
++      dev_dbg(sfb->dev, "want %u bytes for window\n", size);
++
++      fbi->screen_base = dma_alloc_writecombine(sfb->dev, size,
++                                                &map_dma, GFP_KERNEL);
++      if (!fbi->screen_base)
++              return -ENOMEM;
++
++      dev_dbg(sfb->dev, "mapped %x to %p\n",
++              (unsigned int)map_dma, fbi->screen_base);
++
++      memset(fbi->screen_base, 0x0, size);
++      fbi->fix.smem_start = map_dma;
++
++      return 0;
++}
++
++/**
++ * s3c_fb_free_memory() - free the display memory for the given window
++ * @sfb: The base resources for the hardware.
++ * @win: The window to free the display memory for.
++ *
++ * Free the display memory allocated by s3c_fb_alloc_memory().
++ */
++static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
++{
++      struct fb_info *fbi = win->fbinfo;
++
++      dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
++                            fbi->screen_base, fbi->fix.smem_start);
++}
++
++/**
++ * s3c_fb_release_win() - release resources for a framebuffer window.
++ * @win: The window to cleanup the resources for.
++ *
++ * Release the resources that where claimed for the hardware window,
++ * such as the framebuffer instance and any memory claimed for it.
++ */
++static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
++{
++      fb_dealloc_cmap(&win->fbinfo->cmap);
++      unregister_framebuffer(win->fbinfo);
++      s3c_fb_free_memory(sfb, win);
++}
++
++/**
++ * s3c_fb_probe_win() - register an hardware window
++ * @sfb: The base resources for the hardware
++ * @res: Pointer to where to place the resultant window.
++ *
++ * Allocate and do the basic initialisation for one of the hardware's graphics
++ * windows.
++ */
++static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
++                                    struct s3c_fb_win **res)
++{
++      struct fb_var_screeninfo *var;
++      struct fb_videomode *initmode;
++      struct s3c_fb_pd_win *windata;
++      struct s3c_fb_win *win;
++      struct fb_info *fbinfo;
++      int palette_size;
++      int ret;
++
++      dev_dbg(sfb->dev, "probing window %d\n", win_no);
++
++      palette_size = s3c_fb_win_pal_size(win_no);
++
++      fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
++                                 palette_size * sizeof(u32), sfb->dev);
++      if (!fbinfo) {
++              dev_err(sfb->dev, "failed to allocate framebuffer\n");
++              return -ENOENT;
++      }
++
++      windata = sfb->pdata->win[win_no];
++      initmode = &windata->win_mode;
++
++      WARN_ON(windata->max_bpp == 0);
++      WARN_ON(windata->win_mode.xres == 0);
++      WARN_ON(windata->win_mode.yres == 0);
++
++      win = fbinfo->par;
++      var = &fbinfo->var;
++      win->fbinfo = fbinfo;
++      win->parent = sfb;
++      win->windata = windata;
++      win->index = win_no;
++      win->palette_buffer = (u32 *)(win + 1);
++
++      ret = s3c_fb_alloc_memory(sfb, win);
++      if (ret) {
++              dev_err(sfb->dev, "failed to allocate display memory\n");
++              goto err_framebuffer;
++      }
++
++      /* setup the r/b/g positions for the window's palette */
++      s3c_fb_init_palette(win_no, &win->palette);
++
++      /* setup the initial video mode from the window */
++      fb_videomode_to_var(&fbinfo->var, initmode);
++
++      fbinfo->fix.type        = FB_TYPE_PACKED_PIXELS;
++      fbinfo->fix.accel       = FB_ACCEL_NONE;
++      fbinfo->var.activate    = FB_ACTIVATE_NOW;
++      fbinfo->var.vmode       = FB_VMODE_NONINTERLACED;
++      fbinfo->var.bits_per_pixel = windata->default_bpp;
++      fbinfo->fbops           = &s3c_fb_ops;
++      fbinfo->flags           = FBINFO_FLAG_DEFAULT;
++      fbinfo->pseudo_palette  = &win->pseudo_palette;
++
++      /* prepare to actually start the framebuffer */
++
++      ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
++      if (ret < 0) {
++              dev_err(sfb->dev, "check_var failed on initial video params\n");
++              goto err_alloc_mem;
++      }
++
++      /* create initial colour map */
++
++      ret = fb_alloc_cmap(&fbinfo->cmap, s3c_fb_win_pal_size(win_no), 1);
++      if (ret == 0)
++              fb_set_cmap(&fbinfo->cmap, fbinfo);
++      else
++              dev_err(sfb->dev, "failed to allocate fb cmap\n");
++
++      s3c_fb_set_par(fbinfo);
++
++      dev_dbg(sfb->dev, "about to register framebuffer\n");
++
++      /* run the check_var and set_par on our configuration. */
++
++      ret = register_framebuffer(fbinfo);
++      if (ret < 0) {
++              dev_err(sfb->dev, "failed to register framebuffer\n");
++              goto err_alloc_mem;
++      }
++
++      *res = win;
++      dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
++
++      return 0;
++
++err_alloc_mem:
++      s3c_fb_free_memory(sfb, win);
++
++err_framebuffer:
++      unregister_framebuffer(fbinfo);
++      return ret;
++}
++
++/**
++ * s3c_fb_clear_win() - clear hardware window registers.
++ * @sfb: The base resources for the hardware.
++ * @win: The window to process.
++ *
++ * Reset the specific window registers to a known state.
++ */
++static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
++{
++      void __iomem *regs = sfb->regs;
++
++      writel(0, regs + WINCON(win));
++      writel(0xffffff, regs + WxKEYCONy(win, 0));
++      writel(0xffffff, regs + WxKEYCONy(win, 1));
++
++      writel(0, regs + VIDOSD_A(win));
++      writel(0, regs + VIDOSD_B(win));
++      writel(0, regs + VIDOSD_C(win));
++}
++
++static int __devinit s3c_fb_probe(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct s3c_fb_platdata *pd;
++      struct s3c_fb *sfb;
++      struct resource *res;
++      int win;
++      int ret = 0;
++
++      pd = pdev->dev.platform_data;
++      if (!pd) {
++              dev_err(dev, "no platform data specified\n");
++              return -EINVAL;
++      }
++
++      sfb = kzalloc(sizeof(struct s3c_fb), GFP_KERNEL);
++      if (!sfb) {
++              dev_err(dev, "no memory for framebuffers\n");
++              return -ENOMEM;
++      }
++
++      sfb->dev = dev;
++      sfb->pdata = pd;
++
++      sfb->bus_clk = clk_get(dev, "lcd");
++      if (IS_ERR(sfb->bus_clk)) {
++              dev_err(dev, "failed to get bus clock\n");
++              goto err_sfb;
++      }
++
++      clk_enable(sfb->bus_clk);
++
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!res) {
++              dev_err(dev, "failed to find registers\n");
++              ret = -ENOENT;
++              goto err_clk;
++      }
++
++      sfb->regs_res = request_mem_region(res->start, resource_size(res),
++                                         dev_name(dev));
++      if (!sfb->regs_res) {
++              dev_err(dev, "failed to claim register region\n");
++              ret = -ENOENT;
++              goto err_clk;
++      }
++
++      sfb->regs = ioremap(res->start, resource_size(res));
++      if (!sfb->regs) {
++              dev_err(dev, "failed to map registers\n");
++              ret = -ENXIO;
++              goto err_req_region;
++      }
++
++      dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
++
++      /* setup gpio and output polarity controls */
++
++      pd->setup_gpio();
++
++      writel(pd->vidcon1, sfb->regs + VIDCON1);
++
++      /* zero all windows before we do anything */
++
++      for (win = 0; win < S3C_FB_MAX_WIN; win++)
++              s3c_fb_clear_win(sfb, win);
++
++      /* we have the register setup, start allocating framebuffers */
++
++      for (win = 0; win < S3C_FB_MAX_WIN; win++) {
++              if (!pd->win[win])
++                      continue;
++
++              ret = s3c_fb_probe_win(sfb, win, &sfb->windows[win]);
++              if (ret < 0) {
++                      dev_err(dev, "failed to create window %d\n", win);
++                      for (; win >= 0; win--)
++                              s3c_fb_release_win(sfb, sfb->windows[win]);
++                      goto err_ioremap;
++              }
++      }
++
++      platform_set_drvdata(pdev, sfb);
++
++      return 0;
++
++err_ioremap:
++      iounmap(sfb->regs);
++
++err_req_region:
++      release_resource(sfb->regs_res);
++      kfree(sfb->regs_res);
++
++err_clk:
++      clk_disable(sfb->bus_clk);
++      clk_put(sfb->bus_clk);
++
++err_sfb:
++      kfree(sfb);
++      return ret;
++}
++
++/**
++ * s3c_fb_remove() - Cleanup on module finalisation
++ * @pdev: The platform device we are bound to.
++ *
++ * Shutdown and then release all the resources that the driver allocated
++ * on initialisation.
++ */
++static int __devexit s3c_fb_remove(struct platform_device *pdev)
++{
++      struct s3c_fb *sfb = platform_get_drvdata(pdev);
++      int win;
++
++      for (win = 0; win <= S3C_FB_MAX_WIN; win++)
++              s3c_fb_release_win(sfb, sfb->windows[win]);
++
++      iounmap(sfb->regs);
++
++      clk_disable(sfb->bus_clk);
++      clk_put(sfb->bus_clk);
++
++      release_resource(sfb->regs_res);
++      kfree(sfb->regs_res);
++
++      kfree(sfb);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct s3c_fb *sfb = platform_get_drvdata(pdev);
++      struct s3c_fb_win *win;
++      int win_no;
++
++      for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
++              win = sfb->windows[win_no];
++              if (!win)
++                      continue;
++
++              /* use the blank function to push into power-down */
++              s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
++      }
++
++      clk_disable(sfb->bus_clk);
++      return 0;
++}
++
++static int s3c_fb_resume(struct platform_device *pdev)
++{
++      struct s3c_fb *sfb = platform_get_drvdata(pdev);
++      struct s3c_fb_win *win;
++      int win_no;
++
++      clk_enable(sfb->bus_clk);
++
++      for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
++              win = sfb->windows[win_no];
++              if (!win)
++                      continue;
++
++              dev_dbg(&pdev->dev, "resuming window %d\n", win_no);
++              s3c_fb_set_par(win->fbinfo);
++      }
++
++      return 0;
++}
++#else
++#define s3c_fb_suspend NULL
++#define s3c_fb_resume  NULL
++#endif
++
++static struct platform_driver s3c_fb_driver = {
++      .probe          = s3c_fb_probe,
++      .remove         = s3c_fb_remove,
++      .suspend        = s3c_fb_suspend,
++      .resume         = s3c_fb_resume,
++      .driver         = {
++              .name   = "s3c-fb",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init s3c_fb_init(void)
++{
++      return platform_driver_register(&s3c_fb_driver);
++}
++
++static void __exit s3c_fb_cleanup(void)
++{
++      platform_driver_unregister(&s3c_fb_driver);
++}
++
++module_init(s3c_fb_init);
++module_exit(s3c_fb_cleanup);
++
++MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
++MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:s3c-fb");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/watchdog/Kconfig linux-2.6.29-rc3.owrt.om/drivers/watchdog/Kconfig
+--- linux-2.6.29-rc3.owrt/drivers/watchdog/Kconfig     2009-05-10 22:08:45.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/watchdog/Kconfig  2009-05-10 22:28:00.000000000 +0200
+@@ -154,6 +154,13 @@
+         The driver can be built as a module by choosing M, and will
+         be called s3c2410_wdt
++config PCF50606_WATCHDOG
++      depends on MFD_PCF50606
++      tristate "Philips PCF50606 watchdog"
++      help
++        If you say yes here you get support for the Philips PCF50606
++        PMU's watchdog.
++
+ config SA1100_WATCHDOG
+       tristate "SA1100/PXA2xx watchdog"
+       depends on ARCH_SA1100 || ARCH_PXA
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/watchdog/Makefile linux-2.6.29-rc3.owrt.om/drivers/watchdog/Makefile
+--- linux-2.6.29-rc3.owrt/drivers/watchdog/Makefile    2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/drivers/watchdog/Makefile 2009-05-10 22:28:00.000000000 +0200
+@@ -34,6 +34,7 @@
+ obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
+ obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
+ obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
++obj-$(CONFIG_PCF50606_WATCHDOG) += pcf50606_wdt.o
+ obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/drivers/watchdog/pcf50606_wdt.c linux-2.6.29-rc3.owrt.om/drivers/watchdog/pcf50606_wdt.c
+--- linux-2.6.29-rc3.owrt/drivers/watchdog/pcf50606_wdt.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/drivers/watchdog/pcf50606_wdt.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,223 @@
++/* Philips PCF50606 Watchdog Timer Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Matt Hsu, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/err.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/platform_device.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++static struct pcf50606 *pcf = NULL;
++static unsigned long wdt_status;
++
++#define WDT_IN_USE        0
++#define WDT_OK_TO_CLOSE   1
++#define WDT_REGION_INITED 2
++#define WDT_DEVICE_INITED 3
++
++static int allow_close;
++#define CLOSE_STATE_NOT               0x0000
++#define CLOSE_STATE_ALLOW     0x2342
++
++#define PCF50606_REG_OOCC1    0x08
++#define PCF50606_REG_OOCS     0x01
++
++#define PCF50606_OOCS_WDTEXP  0x80
++#define PCF50606_OOCC1_WDTRST         0x08
++
++static void pcf50606_wdt_start(void)
++{
++      pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, PCF50606_OOCC1_WDTRST,
++                       PCF50606_OOCC1_WDTRST);
++}
++
++static void pcf50606_wdt_stop(void)
++{
++      pcf50606_reg_clear_bits(pcf, PCF50606_REG_OOCS, PCF50606_OOCS_WDTEXP);
++}
++
++static void pcf50606_wdt_keepalive(void)
++{
++      pcf50606_wdt_start();
++}
++
++static int pcf50606_wdt_open(struct inode *inode, struct file *file)
++{
++      if (test_and_set_bit(WDT_IN_USE, &wdt_status))
++              return -EBUSY;
++
++      pcf50606_wdt_start();
++
++      return nonseekable_open(inode, file);
++}
++
++static int pcf50606_wdt_release(struct inode *inode, struct file *file)
++{
++      if (allow_close == CLOSE_STATE_ALLOW)
++              pcf50606_wdt_stop();
++      else {
++              printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n");
++              pcf50606_wdt_keepalive();
++      }
++
++      allow_close = CLOSE_STATE_NOT;
++      clear_bit(WDT_IN_USE, &wdt_status);
++
++      return 0;
++}
++
++static ssize_t pcf50606_wdt_write(struct file *file, const char __user *data,
++                                size_t len, loff_t *ppos)
++{
++      if (len) {
++              size_t i;
++
++              for (i = 0; i != len; i++) {
++                      char c;
++                      if (get_user(c, data + i))
++                              return -EFAULT;
++                      if (c == 'V')
++                              allow_close = CLOSE_STATE_ALLOW;
++              }
++              pcf50606_wdt_keepalive();
++      }
++
++      return len;
++}
++
++static struct watchdog_info pcf50606_wdt_ident = {
++      .options        = WDIOF_MAGICCLOSE,
++      .firmware_version = 0,
++      .identity       = "PCF50606 Watchdog",
++};
++
++static int pcf50606_wdt_ioctl(struct inode *inode, struct file *file,
++                            unsigned int cmd, unsigned long arg)
++{
++      void __user *argp = (void __user *)arg;
++      int __user *p = argp;
++
++      switch (cmd) {
++      case WDIOC_GETSUPPORT:
++              return copy_to_user(argp, &pcf50606_wdt_ident,
++                                  sizeof(pcf50606_wdt_ident)) ? -EFAULT : 0;
++              break;
++      case WDIOC_GETSTATUS:
++      case WDIOC_GETBOOTSTATUS:
++              return put_user(0, p);
++      case WDIOC_KEEPALIVE:
++              pcf50606_wdt_keepalive();
++              return 0;
++      case WDIOC_GETTIMEOUT:
++              return put_user(8, p);
++      default:
++              return -ENOIOCTLCMD;
++      }
++}
++
++static struct file_operations pcf50606_wdt_fops = {
++      .owner          = THIS_MODULE,
++      .llseek         = no_llseek,
++      .write          = &pcf50606_wdt_write,
++      .ioctl          = &pcf50606_wdt_ioctl,
++      .open           = &pcf50606_wdt_open,
++      .release        = &pcf50606_wdt_release,
++};
++
++static struct miscdevice pcf50606_wdt_miscdev = {
++      .minor          = WATCHDOG_MINOR,
++      .name           = "watchdog",
++      .fops           = &pcf50606_wdt_fops,
++};
++
++static void pcf50606_wdt_irq(int irq, void *unused)
++{
++      pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_OOCC1,
++                               PCF50606_OOCC1_WDTRST,
++                               PCF50606_OOCC1_WDTRST);
++}
++
++int __init pcf50606_wdt_probe(struct platform_device *pdev)
++{
++      struct pcf50606_subdev_pdata *pdata;
++      int err;
++
++      if (pcf) {
++              dev_err(pcf->dev, "Only one instance of WDT supported\n");
++              return -ENODEV;
++      }
++
++      pdata = pdev->dev.platform_data;
++      if (!pdata) {
++              dev_err(&pdev->dev, "No platform data available\n");
++              return -EINVAL;
++      }
++
++      pcf = pdata->pcf;
++
++      err = misc_register(&pcf50606_wdt_miscdev);
++      if (err) {
++              dev_err(&pdev->dev, "cannot register miscdev on "
++                     "minor=%d (%d)\n", WATCHDOG_MINOR, err);
++              return err;
++      }
++      set_bit(WDT_DEVICE_INITED, &wdt_status);
++
++      pcf50606_register_irq(pcf, PCF50606_IRQ_CHGWD10S, pcf50606_wdt_irq, NULL);
++
++      return 0;
++}
++
++static int __devexit pcf50606_wdt_remove(struct platform_device *pdev)
++{
++      pcf50606_free_irq(pcf, PCF50606_IRQ_CHGWD10S);
++      misc_deregister(&pcf50606_wdt_miscdev);
++      pcf = NULL;
++
++      return 0;
++}
++
++struct platform_driver pcf50606_wdt_driver = {
++      .driver = {
++              .name = "pcf50606-wdt",
++      },
++      .probe = pcf50606_wdt_probe,
++      .remove = __devexit_p(pcf50606_wdt_remove),
++};
++
++static int __init pcf50606_wdt_init(void)
++{
++              return platform_driver_register(&pcf50606_wdt_driver);
++}
++module_init(pcf50606_wdt_init);
++
++static void __exit pcf50606_wdt_exit(void)
++{
++              platform_driver_unregister(&pcf50606_wdt_driver);
++}
++module_exit(pcf50606_wdt_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 wdt driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-wdt");
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/fs/jffs2/background.c linux-2.6.29-rc3.owrt.om/fs/jffs2/background.c
+--- linux-2.6.29-rc3.owrt/fs/jffs2/background.c        2009-05-10 22:08:58.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/fs/jffs2/background.c     2009-05-10 22:28:00.000000000 +0200
+@@ -95,13 +95,17 @@
+                       spin_unlock(&c->erase_completion_lock);
+                       
+-              /* This thread is purely an optimisation. But if it runs when
+-                 other things could be running, it actually makes things a
+-                 lot worse. Use yield() and put it at the back of the runqueue
+-                 every time. Especially during boot, pulling an inode in
+-                 with read_inode() is much preferable to having the GC thread
+-                 get there first. */
+-              yield();
++              /* Problem - immediately after bootup, the GCD spends a lot
++               * of time in places like jffs2_kill_fragtree(); so much so
++               * that userspace processes (like gdm and X) are starved
++               * despite plenty of cond_resched()s and renicing.  Yield()
++               * doesn't help, either (presumably because userspace and GCD
++               * are generally competing for a higher latency resource -
++               * disk).
++               * This forces the GCD to slow the hell down.   Pulling an
++               * inode in with read_inode() is much preferable to having
++               * the GC thread get there first. */
++              schedule_timeout_interruptible(msecs_to_jiffies(50));
+               /* Put_super will send a SIGKILL and then wait on the sem.
+                */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/neo1973.h linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/neo1973.h
+--- linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/neo1973.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/neo1973.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,33 @@
++/*
++ * include/asm-arm/plat-s3c24xx/neo1973.h
++ *
++ * Common utility code for GTA01 and GTA02
++ *
++ * Copyright (C) 2008 by Openmoko, Inc.
++ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef NEO1973_H
++#define NEO1973_H
++
++void neo1973_gpb_add_shadow_gpio(unsigned int gpio);
++void neo1973_gpb_setpin(unsigned int pin, unsigned to);
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/regs-iis.h linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/regs-iis.h
+--- linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/regs-iis.h      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/regs-iis.h   1970-01-01 01:00:00.000000000 +0100
+@@ -1,77 +0,0 @@
+-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
+- *
+- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+- *                  http://www.simtec.co.uk/products/SWLINUX/
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * S3C2410 IIS register definition
+-*/
+-
+-#ifndef __ASM_ARCH_REGS_IIS_H
+-#define __ASM_ARCH_REGS_IIS_H
+-
+-#define S3C2410_IISCON         (0x00)
+-
+-#define S3C2410_IISCON_LRINDEX          (1<<8)
+-#define S3C2410_IISCON_TXFIFORDY  (1<<7)
+-#define S3C2410_IISCON_RXFIFORDY  (1<<6)
+-#define S3C2410_IISCON_TXDMAEN          (1<<5)
+-#define S3C2410_IISCON_RXDMAEN          (1<<4)
+-#define S3C2410_IISCON_TXIDLE   (1<<3)
+-#define S3C2410_IISCON_RXIDLE   (1<<2)
+-#define S3C2410_IISCON_PSCEN    (1<<1)
+-#define S3C2410_IISCON_IISEN    (1<<0)
+-
+-#define S3C2410_IISMOD         (0x04)
+-
+-#define S3C2440_IISMOD_MPLL     (1<<9)
+-#define S3C2410_IISMOD_SLAVE    (1<<8)
+-#define S3C2410_IISMOD_NOXFER   (0<<6)
+-#define S3C2410_IISMOD_RXMODE   (1<<6)
+-#define S3C2410_IISMOD_TXMODE   (2<<6)
+-#define S3C2410_IISMOD_TXRXMODE         (3<<6)
+-#define S3C2410_IISMOD_LR_LLOW          (0<<5)
+-#define S3C2410_IISMOD_LR_RLOW          (1<<5)
+-#define S3C2410_IISMOD_IIS      (0<<4)
+-#define S3C2410_IISMOD_MSB      (1<<4)
+-#define S3C2410_IISMOD_8BIT     (0<<3)
+-#define S3C2410_IISMOD_16BIT    (1<<3)
+-#define S3C2410_IISMOD_BITMASK          (1<<3)
+-#define S3C2410_IISMOD_256FS    (0<<2)
+-#define S3C2410_IISMOD_384FS    (1<<2)
+-#define S3C2410_IISMOD_16FS     (0<<0)
+-#define S3C2410_IISMOD_32FS     (1<<0)
+-#define S3C2410_IISMOD_48FS     (2<<0)
+-#define S3C2410_IISMOD_FS_MASK          (3<<0)
+-
+-#define S3C2410_IISPSR                (0x08)
+-#define S3C2410_IISPSR_INTMASK        (31<<5)
+-#define S3C2410_IISPSR_INTSHIFT       (5)
+-#define S3C2410_IISPSR_EXTMASK        (31<<0)
+-#define S3C2410_IISPSR_EXTSHFIT       (0)
+-
+-#define S3C2410_IISFCON  (0x0c)
+-
+-#define S3C2410_IISFCON_TXDMA   (1<<15)
+-#define S3C2410_IISFCON_RXDMA   (1<<14)
+-#define S3C2410_IISFCON_TXENABLE  (1<<13)
+-#define S3C2410_IISFCON_RXENABLE  (1<<12)
+-#define S3C2410_IISFCON_TXMASK          (0x3f << 6)
+-#define S3C2410_IISFCON_TXSHIFT         (6)
+-#define S3C2410_IISFCON_RXMASK          (0x3f)
+-#define S3C2410_IISFCON_RXSHIFT         (0)
+-
+-#define S3C2400_IISFCON_TXDMA     (1<<11)
+-#define S3C2400_IISFCON_RXDMA     (1<<10)
+-#define S3C2400_IISFCON_TXENABLE  (1<<9)
+-#define S3C2400_IISFCON_RXENABLE  (1<<8)
+-#define S3C2400_IISFCON_TXMASK          (0x07 << 4)
+-#define S3C2400_IISFCON_TXSHIFT         (4)
+-#define S3C2400_IISFCON_RXMASK          (0x07)
+-#define S3C2400_IISFCON_RXSHIFT         (0)
+-
+-#define S3C2410_IISFIFO  (0x10)
+-#endif /* __ASM_ARCH_REGS_IIS_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+--- linux-2.6.29-rc3.owrt/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h   1970-01-01 01:00:00.000000000 +0100
+@@ -1,72 +0,0 @@
+-/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+- *
+- * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+- *    http://armlinux.simtec.co.uk/
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * S3C2412 IIS register definition
+-*/
+-
+-#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+-#define __ASM_ARCH_REGS_S3C2412_IIS_H
+-
+-#define S3C2412_IISCON                        (0x00)
+-#define S3C2412_IISMOD                        (0x04)
+-#define S3C2412_IISFIC                        (0x08)
+-#define S3C2412_IISPSR                        (0x0C)
+-#define S3C2412_IISTXD                        (0x10)
+-#define S3C2412_IISRXD                        (0x14)
+-
+-#define S3C2412_IISCON_LRINDEX                (1 << 11)
+-#define S3C2412_IISCON_TXFIFO_EMPTY   (1 << 10)
+-#define S3C2412_IISCON_RXFIFO_EMPTY   (1 << 9)
+-#define S3C2412_IISCON_TXFIFO_FULL    (1 << 8)
+-#define S3C2412_IISCON_RXFIFO_FULL    (1 << 7)
+-#define S3C2412_IISCON_TXDMA_PAUSE    (1 << 6)
+-#define S3C2412_IISCON_RXDMA_PAUSE    (1 << 5)
+-#define S3C2412_IISCON_TXCH_PAUSE     (1 << 4)
+-#define S3C2412_IISCON_RXCH_PAUSE     (1 << 3)
+-#define S3C2412_IISCON_TXDMA_ACTIVE   (1 << 2)
+-#define S3C2412_IISCON_RXDMA_ACTIVE   (1 << 1)
+-#define S3C2412_IISCON_IIS_ACTIVE     (1 << 0)
+-
+-#define S3C2412_IISMOD_MASTER_INTERNAL        (0 << 10)
+-#define S3C2412_IISMOD_MASTER_EXTERNAL        (1 << 10)
+-#define S3C2412_IISMOD_SLAVE          (2 << 10)
+-#define S3C2412_IISMOD_MASTER_MASK    (3 << 10)
+-#define S3C2412_IISMOD_MODE_TXONLY    (0 << 8)
+-#define S3C2412_IISMOD_MODE_RXONLY    (1 << 8)
+-#define S3C2412_IISMOD_MODE_TXRX      (2 << 8)
+-#define S3C2412_IISMOD_MODE_MASK      (3 << 8)
+-#define S3C2412_IISMOD_LR_LLOW                (0 << 7)
+-#define S3C2412_IISMOD_LR_RLOW                (1 << 7)
+-#define S3C2412_IISMOD_SDF_IIS                (0 << 5)
+-#define S3C2412_IISMOD_SDF_MSB                (0 << 5)
+-#define S3C2412_IISMOD_SDF_LSB                (0 << 5)
+-#define S3C2412_IISMOD_SDF_MASK               (3 << 5)
+-#define S3C2412_IISMOD_RCLK_256FS     (0 << 3)
+-#define S3C2412_IISMOD_RCLK_512FS     (1 << 3)
+-#define S3C2412_IISMOD_RCLK_384FS     (2 << 3)
+-#define S3C2412_IISMOD_RCLK_768FS     (3 << 3)
+-#define S3C2412_IISMOD_RCLK_MASK      (3 << 3)
+-#define S3C2412_IISMOD_BCLK_32FS      (0 << 1)
+-#define S3C2412_IISMOD_BCLK_48FS      (1 << 1)
+-#define S3C2412_IISMOD_BCLK_16FS      (2 << 1)
+-#define S3C2412_IISMOD_BCLK_24FS      (3 << 1)
+-#define S3C2412_IISMOD_BCLK_MASK      (3 << 1)
+-#define S3C2412_IISMOD_8BIT           (1 << 0)
+-
+-#define S3C2412_IISPSR_PSREN          (1 << 15)
+-
+-#define S3C2412_IISFIC_TXFLUSH                (1 << 15)
+-#define S3C2412_IISFIC_RXFLUSH                (1 << 7)
+-#define S3C2412_IISFIC_TXCOUNT(x)     (((x) >>  8) & 0xf)
+-#define S3C2412_IISFIC_RXCOUNT(x)     (((x) >>  0) & 0xf)
+-
+-
+-
+-#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
+-
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/android_aid.h linux-2.6.29-rc3.owrt.om/include/linux/android_aid.h
+--- linux-2.6.29-rc3.owrt/include/linux/android_aid.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/android_aid.h       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,25 @@
++/* include/linux/android_aid.h
++ *
++ * Copyright (C) 2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _LINUX_ANDROID_AID_H
++#define _LINUX_ANDROID_AID_H
++
++/* AIDs that the kernel treats differently */
++#define AID_NET_BT_ADMIN 3001
++#define AID_NET_BT       3002
++#define AID_INET         3003
++#define AID_NET_RAW      3004
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/android_alarm.h linux-2.6.29-rc3.owrt.om/include/linux/android_alarm.h
+--- linux-2.6.29-rc3.owrt/include/linux/android_alarm.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/android_alarm.h     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,62 @@
++/* include/linux/android_alarm.h
++ *
++ * Copyright (C) 2006-2007 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _LINUX_ANDROID_ALARM_H
++#define _LINUX_ANDROID_ALARM_H
++
++#include <linux/ioctl.h>
++#include <linux/time.h>
++
++enum android_alarm_type {
++      /* return code bit numbers or set alarm arg */
++      ANDROID_ALARM_RTC_WAKEUP,
++      ANDROID_ALARM_RTC,
++      ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP,
++      ANDROID_ALARM_ELAPSED_REALTIME,
++      ANDROID_ALARM_SYSTEMTIME,
++
++      ANDROID_ALARM_TYPE_COUNT,
++
++      /* return code bit numbers */
++      /* ANDROID_ALARM_TIME_CHANGE = 16 */
++};
++
++enum android_alarm_return_flags {
++      ANDROID_ALARM_RTC_WAKEUP_MASK = 1U << ANDROID_ALARM_RTC_WAKEUP,
++      ANDROID_ALARM_RTC_MASK = 1U << ANDROID_ALARM_RTC,
++      ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK =
++                              1U << ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP,
++      ANDROID_ALARM_ELAPSED_REALTIME_MASK =
++                              1U << ANDROID_ALARM_ELAPSED_REALTIME,
++      ANDROID_ALARM_SYSTEMTIME_MASK = 1U << ANDROID_ALARM_SYSTEMTIME,
++      ANDROID_ALARM_TIME_CHANGE_MASK = 1U << 16
++};
++
++/* Disable alarm */
++#define ANDROID_ALARM_CLEAR(type)           _IO('a', 0 | ((type) << 4))
++
++/* Ack last alarm and wait for next */
++#define ANDROID_ALARM_WAIT                  _IO('a', 1)
++
++#define ALARM_IOW(c, type, size)            _IOW('a', (c) | ((type) << 4), size)
++/* Set alarm */
++#define ANDROID_ALARM_SET(type)             ALARM_IOW(2, type, struct timespec)
++#define ANDROID_ALARM_SET_AND_WAIT(type)    ALARM_IOW(3, type, struct timespec)
++#define ANDROID_ALARM_GET_TIME(type)        ALARM_IOW(4, type, struct timespec)
++#define ANDROID_ALARM_SET_RTC               _IOW('a', 5, struct timespec)
++#define ANDROID_ALARM_BASE_CMD(cmd)         (cmd & ~(_IOC(0, 0, 0xf0, 0)))
++#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd)    (_IOC_NR(cmd) >> 4)
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/ashmem.h linux-2.6.29-rc3.owrt.om/include/linux/ashmem.h
+--- linux-2.6.29-rc3.owrt/include/linux/ashmem.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/ashmem.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,48 @@
++/*
++ * include/linux/ashmem.h
++ *
++ * Copyright 2008 Google Inc.
++ * Author: Robert Love
++ *
++ * This file is dual licensed.  It may be redistributed and/or modified
++ * under the terms of the Apache 2.0 License OR version 2 of the GNU
++ * General Public License.
++ */
++
++#ifndef _LINUX_ASHMEM_H
++#define _LINUX_ASHMEM_H
++
++#include <linux/limits.h>
++#include <linux/ioctl.h>
++
++#define ASHMEM_NAME_LEN               256
++
++#define ASHMEM_NAME_DEF               "dev/ashmem"
++
++/* Return values from ASHMEM_PIN: Was the mapping purged while unpinned? */
++#define ASHMEM_NOT_PURGED     0
++#define ASHMEM_WAS_PURGED     1
++
++/* Return values from ASHMEM_GET_PIN_STATUS: Is the mapping pinned? */
++#define ASHMEM_IS_UNPINNED    0
++#define ASHMEM_IS_PINNED      1
++
++struct ashmem_pin {
++      __u32 offset;   /* offset into region, in bytes, page-aligned */
++      __u32 len;      /* length forward from offset, in bytes, page-aligned */
++};
++
++#define __ASHMEMIOC           0x77
++
++#define ASHMEM_SET_NAME               _IOW(__ASHMEMIOC, 1, char[ASHMEM_NAME_LEN])
++#define ASHMEM_GET_NAME               _IOR(__ASHMEMIOC, 2, char[ASHMEM_NAME_LEN])
++#define ASHMEM_SET_SIZE               _IOW(__ASHMEMIOC, 3, size_t)
++#define ASHMEM_GET_SIZE               _IO(__ASHMEMIOC, 4)
++#define ASHMEM_SET_PROT_MASK  _IOW(__ASHMEMIOC, 5, unsigned long)
++#define ASHMEM_GET_PROT_MASK  _IO(__ASHMEMIOC, 6)
++#define ASHMEM_PIN            _IOW(__ASHMEMIOC, 7, struct ashmem_pin)
++#define ASHMEM_UNPIN          _IOW(__ASHMEMIOC, 8, struct ashmem_pin)
++#define ASHMEM_GET_PIN_STATUS _IO(__ASHMEMIOC, 9)
++#define ASHMEM_PURGE_ALL_CACHES       _IO(__ASHMEMIOC, 10)
++
++#endif        /* _LINUX_ASHMEM_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/bq27000_battery.h linux-2.6.29-rc3.owrt.om/include/linux/bq27000_battery.h
+--- linux-2.6.29-rc3.owrt/include/linux/bq27000_battery.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/bq27000_battery.h   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,16 @@
++#ifndef __BQ27000_BATTERY_H__
++#define __BQ27000_BATTERY_H__
++
++void bq27000_charging_state_change(struct platform_device *pdev);
++
++struct bq27000_platform_data {
++      const char      *name;
++      int             rsense_mohms;
++      int (*hdq_read)(int);
++      int (*hdq_write)(int, u8);
++      int (*hdq_initialized)(void);
++      int (*get_charger_online_status)(void);
++      int (*get_charger_active_status)(void);
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/device.h linux-2.6.29-rc3.owrt.om/include/linux/device.h
+--- linux-2.6.29-rc3.owrt/include/linux/device.h       2009-05-10 22:09:07.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/device.h    2009-05-10 22:28:00.000000000 +0200
+@@ -48,6 +48,11 @@
+                                       struct bus_attribute *);
+ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
++extern int __must_check bus_create_device_link(struct bus_type *bus,
++                                             struct kobject *target,
++                                             const char *name);
++extern void bus_remove_device_link(struct bus_type *bus, const char *name);
++
+ struct bus_type {
+       const char              *name;
+       struct bus_attribute    *bus_attrs;
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/earlysuspend.h linux-2.6.29-rc3.owrt.om/include/linux/earlysuspend.h
+--- linux-2.6.29-rc3.owrt/include/linux/earlysuspend.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/earlysuspend.h      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,56 @@
++/* include/linux/earlysuspend.h
++ *
++ * Copyright (C) 2007-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _LINUX_EARLYSUSPEND_H
++#define _LINUX_EARLYSUSPEND_H
++
++#ifdef CONFIG_ANDROID_HAS_EARLYSUSPEND
++#include <linux/list.h>
++#endif
++
++/* The early_suspend structure defines suspend and resume hooks to be called
++ * when the user visible sleep state of the system changes, and a level to
++ * control the order. They can be used to turn off the screen and input
++ * devices that are not used for wakeup.
++ * Suspend handlers are called in low to high level order, resume handlers are
++ * called in the opposite order. If, when calling register_early_suspend,
++ * the suspend handlers have already been called without a matching call to the
++ * resume handlers, the suspend handler will be called directly from
++ * register_early_suspend. This direct call can violate the normal level order.
++ */
++enum {
++      EARLY_SUSPEND_LEVEL_BLANK_SCREEN = 50,
++      EARLY_SUSPEND_LEVEL_STOP_DRAWING = 100,
++      EARLY_SUSPEND_LEVEL_DISABLE_FB = 150,
++};
++struct early_suspend {
++#ifdef CONFIG_ANDROID_HAS_EARLYSUSPEND
++      struct list_head link;
++      int level;
++      void (*suspend)(struct early_suspend *h);
++      void (*resume)(struct early_suspend *h);
++#endif
++};
++
++#ifdef CONFIG_ANDROID_HAS_EARLYSUSPEND
++void register_early_suspend(struct early_suspend *handler);
++void unregister_early_suspend(struct early_suspend *handler);
++#else
++#define register_early_suspend(handler) do { } while (0)
++#define unregister_early_suspend(handler) do { } while (0)
++#endif
++
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/fb.h linux-2.6.29-rc3.owrt.om/include/linux/fb.h
+--- linux-2.6.29-rc3.owrt/include/linux/fb.h   2009-05-10 22:09:07.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/fb.h        2009-05-10 22:28:00.000000000 +0200
+@@ -123,6 +123,7 @@
+ #define FB_ACCEL_TRIDENT_3DIMAGE 51   /* Trident 3DImage              */
+ #define FB_ACCEL_TRIDENT_BLADE3D 52   /* Trident Blade3D              */
+ #define FB_ACCEL_TRIDENT_BLADEXP 53   /* Trident BladeXP              */
++#define FB_ACCEL_GLAMO                50      /* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90   /* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91   /* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92   /* NeoMagic NM2093              */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/glamofb.h linux-2.6.29-rc3.owrt.om/include/linux/glamofb.h
+--- linux-2.6.29-rc3.owrt/include/linux/glamofb.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/glamofb.h   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,50 @@
++#ifndef _LINUX_GLAMOFB_H
++#define _LINUX_GLAMOFB_H
++
++#include <linux/spi/glamo.h>
++
++struct glamofb_val {
++      unsigned int defval;
++      unsigned int min;
++      unsigned int max;
++};
++
++struct glamo_core;
++
++struct glamofb_platform_data {
++      int width, height;
++      int pixclock;
++      int left_margin, right_margin;
++      int upper_margin, lower_margin;
++      int hsync_len, vsync_len;
++      int fb_mem_size;
++
++      struct glamofb_val xres;
++      struct glamofb_val yres;
++      struct glamofb_val bpp;
++
++      struct glamo_spi_info *spi_info;
++      struct glamo_spigpio_info *spigpio_info;
++      struct glamo_core *glamo;
++
++      struct platform_device *mmc_dev;
++
++      /* glamo mmc platform specific info */
++      int             (*glamo_can_set_mci_power)(void);
++      
++      /* glamo-mci asking if it should use the slow clock to card */
++      int             (*glamo_mci_use_slow)(void);
++      int             (*glamo_irq_is_wired)(void);
++      void            (*glamo_external_reset)(int);
++};
++
++int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
++int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
++
++#ifdef CONFIG_MFD_GLAMO
++void glamo_lcm_reset(int level);
++#else
++#define glamo_lcm_reset(...) do {} while (0)
++#endif
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/glamo-gpio.h linux-2.6.29-rc3.owrt.om/include/linux/glamo-gpio.h
+--- linux-2.6.29-rc3.owrt/include/linux/glamo-gpio.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/glamo-gpio.h        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,99 @@
++#ifndef __GLAMO_GPIO_H
++#define __GLAMO_GPIO_H
++
++struct glamo_core;
++
++#define GLAMO_GPIO_BANKA      0x0000
++#define GLAMO_GPIO_BANKB      0x1000
++#define GLAMO_GPIO_BANKC      0x2000
++#define GLAMO_GPIO_BANKD      0x3000
++
++#define GLAMO_GPIONO(bank, pin)       ((bank & 0xf000) | ((pin & 0xf) << 8))
++
++#define GLAMO_GPIO_F_IN               0x0010
++#define GLAMO_GPIO_F_OUT      0x0020
++#define GLAMO_GPIO_F_FUNC     0x0030
++
++#define GLAMO_GPIO0           GLAMO_GPIONO(GLAMO_GPIO_BANKA, 0)
++#define GLAMO_GPIO0_INPUT     (GLAMO_GPIO0 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO0_OUTPUT    (GLAMO_GPIO0 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO0_HA20      (GLAMO_GPIO0 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO1           GLAMO_GPIONO(GLAMO_GPIO_BANKA, 1)
++#define GLAMO_GPIO1_INPUT     (GLAMO_GPIO1 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO1_OUTPUT    (GLAMO_GPIO1 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO1_HA21      (GLAMO_GPIO1 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO2           GLAMO_GPIONO(GLAMO_GPIO_BANKA, 2)
++#define GLAMO_GPIO2_INPUT     (GLAMO_GPIO2 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO2_OUTPUT    (GLAMO_GPIO2 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO2_HA22      (GLAMO_GPIO2 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO3           GLAMO_GPIONO(GLAMO_GPIO_BANKA, 3)
++#define GLAMO_GPIO3_INPUT     (GLAMO_GPIO3 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO3_OUTPUT    (GLAMO_GPIO3 | GLAMO_GPIO_F_OUT)
++#define       GLAMO_GPIO3_HA23        (GLAMO_GPIO3 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO4           GLAMO_GPIONO(GLAMO_GPIO_BANKB, 0)
++#define GLAMO_GPIO4_INPUT     (GLAMO_GPIO4 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO4_OUTPUT    (GLAMO_GPIO4 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO4_nLCS0     (GLAMO_GPIO4 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO5           GLAMO_GPIONO(GLAMO_GPIO_BANKB, 1)
++#define GLAMO_GPIO5_INPUT     (GLAMO_GPIO5 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO5_OUTPUT    (GLAMO_GPIO5 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO5_nLCS1     (GLAMO_GPIO5 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO6           GLAMO_GPIONO(GLAMO_GPIO_BANKB, 2)
++#define GLAMO_GPIO6_INPUT     (GLAMO_GPIO6 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO6_OUTPUT    (GLAMO_GPIO6 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO6_LDCLK     (GLAMO_GPIO6 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO7           GLAMO_GPIONO(GLAMO_GPIO_BANKB, 3)
++#define GLAMO_GPIO7_INPUT     (GLAMO_GPIO7 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO7_OUTPUT    (GLAMO_GPIO7 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO7_nLDE      (GLAMO_GPIO7 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO8           GLAMO_GPIONO(GLAMO_GPIO_BANKC, 0)
++#define GLAMO_GPIO8_INPUT     (GLAMO_GPIO8 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO8_OUTPUT    (GLAMO_GPIO8 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO8_LD16      (GLAMO_GPIO8 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO9           GLAMO_GPIONO(GLAMO_GPIO_BANKC, 1)
++#define GLAMO_GPIO9_INPUT     (GLAMO_GPIO9 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO9_OUTPUT    (GLAMO_GPIO9 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO9_LD17      (GLAMO_GPIO9 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO10          GLAMO_GPIONO(GLAMO_GPIO_BANKC, 2)
++#define GLAMO_GPIO10_INPUT    (GLAMO_GPIO10 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO10_OUTPUT   (GLAMO_GPIO10 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO10_LSCK     (GLAMO_GPIO10 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO11          GLAMO_GPIONO(GLAMO_GPIO_BANKC, 3)
++#define GLAMO_GPIO11_INPUT    (GLAMO_GPIO11 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO11_OUTPUT   (GLAMO_GPIO11 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO11_LSDA     (GLAMO_GPIO11 | GLAMO_GPIO_F_FUNC)
++
++#define GLAMO_GPIO12          GLAMO_GPIONO(GLAMO_GPIO_BANKD, 0)
++#define GLAMO_GPIO12_INPUT    (GLAMO_GPIO12 | GLAMO_GPIO_F_IN)
++#define GLAMO_GPIO12_OUTPUT   (GLAMO_GPIO12 | GLAMO_GPIO_F_OUT)
++#define GLAMO_GPIO12_LSA0     (GLAMO_GPIO12 | GLAMO_GPIO_F_FUNC)
++
++
++#define REG_OF_GPIO(gpio)     (((gpio & 0xf000) >> 12)*2 \
++                                              + GLAMO_REG_GPIO_GEN1)
++#define NUM_OF_GPIO(gpio)     ((gpio & 0x0f00) >> 8)
++#define GPIO_OUT_BIT(gpio)    (1 << (NUM_OF_GPIO(gpio) + 0))
++#define OUTPUT_BIT(gpio)      (1 << (NUM_OF_GPIO(gpio) + 4))
++#define INPUT_BIT(gpio)               (1 << (NUM_OF_GPIO(gpio) + 8))
++#define FUNC_BIT(gpio)                (1 << (NUM_OF_GPIO(gpio) + 12))
++
++void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
++                     unsigned int value);
++
++int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin);
++
++void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc);
++
++
++#endif /* _GLAMO_GPIO */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/gta01_battery.h linux-2.6.29-rc3.owrt.om/include/linux/gta01_battery.h
+--- linux-2.6.29-rc3.owrt/include/linux/gta01_battery.h        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/gta01_battery.h     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,10 @@
++#ifndef __GTA01_BATTERY_H__
++#define __GTA01_BATTERY_H__
++
++struct gta01_bat_platform_data {
++      int (*get_charging_status)(void);
++      int (*get_voltage)(void);
++      int (*get_current)(void);
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/gta02_hdq.h linux-2.6.29-rc3.owrt.om/include/linux/gta02_hdq.h
+--- linux-2.6.29-rc3.owrt/include/linux/gta02_hdq.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/gta02_hdq.h 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,18 @@
++#ifndef __GTA02HDQ_H__
++#define __GTA02HDQ_H__
++
++/* platform data */
++
++struct gta02_hdq_platform_data {
++      /*
++       * give an opportunity to use us as parent for
++       * devices that depend on us
++       */
++      void (*attach_child_devices)(struct device *parent_device);
++};
++
++int gta02hdq_read(int address);
++int gta02hdq_write(int address, u8 data);
++int gta02hdq_initialized(void);
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/hdq.h linux-2.6.29-rc3.owrt.om/include/linux/hdq.h
+--- linux-2.6.29-rc3.owrt/include/linux/hdq.h  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/hdq.h       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,32 @@
++#ifndef __LINUX_HDQ_H__
++#define __LINUX_HDQ_H__
++
++#include <linux/device.h>
++
++#define HDQ_SAMPLE_PERIOD_US  10
++
++/* platform data */
++
++struct hdq_platform_data {
++      /*
++       * give an opportunity to use us as parent for
++       * devices that depend on us
++       */
++      void (*attach_child_devices)(struct device *parent_device);
++      
++      void (*gpio_dir_out)(void);
++      void (*gpio_dir_in)(void);
++      void (*gpio_set)(int);
++      int (*gpio_get)(void);
++
++      int (*enable_fiq)(void);
++      void (*disable_fiq)(void);
++      void (*kick_fiq)(void);
++
++};
++
++int hdq_read(int address);
++int hdq_write(int address, u8 data);
++int hdq_initialized(void);
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/i2c-id.h linux-2.6.29-rc3.owrt.om/include/linux/i2c-id.h
+--- linux-2.6.29-rc3.owrt/include/linux/i2c-id.h       2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/i2c-id.h    2009-05-10 22:28:00.000000000 +0200
+@@ -73,6 +73,15 @@
+ #define I2C_DRIVERID_CS5345   96      /* cs5345 audio processor       */
+ #define I2C_DRIVERID_OV7670 1048      /* Omnivision 7670 camera */
++#define I2C_DRIVERID_PCF50606 1049
++#define I2C_DRIVERID_PCF50633 1051
++#define I2C_DRIVERID_PCA9632  1052
++
++#define       I2C_DRIVERID_S5K_3XA    1500    /* Samsung MobileAP I2C adapter */
++#define       I2C_DRIVERID_S5K_53BEA  1501    /* Samsung MobileAP I2C adapter */
++#define       I2C_DRIVERID_S5K_532    1502    /* Samsung MobileAP I2C adapter */
++#define       I2C_DRIVERID_S5K_3BA    1503    /* Samsung MobileAP I2C adapter */
++#define       I2C_DRIVERID_S5K_4XA    1504    /* Samsung MobileAP I2C adapter */
+ /*
+  * ---- Adapter types ----------------------------------------------------
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/jbt6k74.h linux-2.6.29-rc3.owrt.om/include/linux/jbt6k74.h
+--- linux-2.6.29-rc3.owrt/include/linux/jbt6k74.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/jbt6k74.h   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,12 @@
++#ifndef __JBT6K74_H__
++#define __JBT6K74_H__
++
++#include <linux/spi/spi.h>
++
++struct jbt6k74_platform_data {
++      void (*reset)(int devindex, int level);
++      void (*resuming)(int devindex); /* called when LCM is resumed */
++      void (*probe_completed)(struct device *dev);
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/kernel.h linux-2.6.29-rc3.owrt.om/include/linux/kernel.h
+--- linux-2.6.29-rc3.owrt/include/linux/kernel.h       2009-05-10 22:09:07.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/kernel.h    2009-05-10 22:28:00.000000000 +0200
+@@ -242,6 +242,8 @@
+ extern int printk_ratelimit(void);
+ extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+                                  unsigned int interval_msec);
++extern void (*printk_emergency_debug_spew_init)(void);
++extern void (*printk_emergency_debug_spew_send_string)(const char *);
+ #else
+ static inline int vprintk(const char *s, va_list args)
+       __attribute__ ((format (printf, 1, 0)));
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/kexec.h linux-2.6.29-rc3.owrt.om/include/linux/kexec.h
+--- linux-2.6.29-rc3.owrt/include/linux/kexec.h        2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/kexec.h     2009-05-10 22:28:00.000000000 +0200
+@@ -1,7 +1,6 @@
+ #ifndef LINUX_KEXEC_H
+ #define LINUX_KEXEC_H
+-#ifdef CONFIG_KEXEC
+ #include <linux/types.h>
+ #include <linux/list.h>
+ #include <linux/linkage.h>
+@@ -11,6 +10,8 @@
+ #include <linux/elf.h>
+ #include <asm/kexec.h>
++#ifdef CONFIG_KEXEC
++
+ /* Verify architecture specific macros are defined */
+ #ifndef KEXEC_SOURCE_MEMORY_LIMIT
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/l1k002.h linux-2.6.29-rc3.owrt.om/include/linux/l1k002.h
+--- linux-2.6.29-rc3.owrt/include/linux/l1k002.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/l1k002.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,8 @@
++#ifndef __LINUX_L1K002_H_
++#define __LINUX_L1K002_H_
++
++struct l1k002_platform_data {
++      void (*pwr_onoff)(int level);
++};
++
++#endif /* __LINUX_L1K002_H_ */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/lis302dl.h linux-2.6.29-rc3.owrt.om/include/linux/lis302dl.h
+--- linux-2.6.29-rc3.owrt/include/linux/lis302dl.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/lis302dl.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,152 @@
++#ifndef _LINUX_LIS302DL_H
++#define _LINUX_LIS302DL_H
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++#include <linux/input.h>
++#include <linux/workqueue.h>
++
++struct lis302dl_info;
++
++struct lis302dl_platform_data {
++      char *name;
++      unsigned long pin_chip_select;
++      unsigned long pin_clk;
++      unsigned long pin_mosi;
++      unsigned long pin_miso;
++      int open_drain;
++      int interrupt;
++      void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
++};
++
++struct lis302dl_info {
++      struct lis302dl_platform_data *pdata;
++      struct device *dev;
++      struct input_dev *input_dev;
++      unsigned int flags;
++      unsigned int threshold;
++      unsigned int duration;
++      u32 overruns;
++      struct {
++              unsigned int threshold; /* mg */
++              unsigned int duration;  /* ms */
++      } wakeup;
++
++      struct spi_device *spi;
++      u_int8_t regs[0x40];
++};
++
++enum lis302dl_reg {
++      LIS302DL_REG_WHO_AM_I           = 0x0f,
++      LIS302DL_REG_CTRL1              = 0x20,
++      LIS302DL_REG_CTRL2              = 0x21,
++      LIS302DL_REG_CTRL3              = 0x22,
++      LIS302DL_REG_HP_FILTER_RESET    = 0x23,
++      LIS302DL_REG_STATUS             = 0x27,
++      LIS302DL_REG_OUT_X              = 0x29,
++      LIS302DL_REG_OUT_Y              = 0x2b,
++      LIS302DL_REG_OUT_Z              = 0x2d,
++      LIS302DL_REG_FF_WU_CFG_1        = 0x30,
++      LIS302DL_REG_FF_WU_SRC_1        = 0x31,
++      LIS302DL_REG_FF_WU_THS_1        = 0x32,
++      LIS302DL_REG_FF_WU_DURATION_1   = 0x33,
++      LIS302DL_REG_FF_WU_CFG_2        = 0x34,
++      LIS302DL_REG_FF_WU_SRC_2        = 0x35,
++      LIS302DL_REG_FF_WU_THS_2        = 0x36,
++      LIS302DL_REG_FF_WU_DURATION_2   = 0x37,
++      LIS302DL_REG_CLICK_CFG          = 0x38,
++      LIS302DL_REG_CLICK_SRC          = 0x39,
++      LIS302DL_REG_CLICK_THSY_X       = 0x3b,
++      LIS302DL_REG_CLICK_THSZ         = 0x3c,
++      LIS302DL_REG_CLICK_TIME_LIMIT   = 0x3d,
++      LIS302DL_REG_CLICK_LATENCY      = 0x3e,
++      LIS302DL_REG_CLICK_WINDOW       = 0x3f,
++};
++
++enum lis302dl_reg_ctrl1 {
++      LIS302DL_CTRL1_Xen              = 0x01,
++      LIS302DL_CTRL1_Yen              = 0x02,
++      LIS302DL_CTRL1_Zen              = 0x04,
++      LIS302DL_CTRL1_STM              = 0x08,
++      LIS302DL_CTRL1_STP              = 0x10,
++      LIS302DL_CTRL1_FS               = 0x20,
++      LIS302DL_CTRL1_PD               = 0x40,
++      LIS302DL_CTRL1_DR               = 0x80,
++};
++
++enum lis302dl_reg_ctrl2 {
++      LIS302DL_CTRL2_HPC1             = 0x01,
++      LIS302DL_CTRL2_HPC2             = 0x02,
++      LIS302DL_CTRL2_HPFF1            = 0x04,
++      LIS302DL_CTRL2_HPFF2            = 0x08,
++      LIS302DL_CTRL2_FDS              = 0x10,
++      LIS302DL_CTRL2_BOOT             = 0x40,
++      LIS302DL_CTRL2_SIM              = 0x80,
++};
++enum lis302dl_reg_ctrl3 {
++      LIS302DL_CTRL3_PP_OD            = 0x40,
++      LIS302DL_CTRL3_IHL              = 0x80,
++};
++
++enum lis302dl_reg_status {
++      LIS302DL_STATUS_XDA             = 0x01,
++      LIS302DL_STATUS_YDA             = 0x02,
++      LIS302DL_STATUS_ZDA             = 0x04,
++      LIS302DL_STATUS_XYZDA           = 0x08,
++      LIS302DL_STATUS_XOR             = 0x10,
++      LIS302DL_STATUS_YOR             = 0x20,
++      LIS302DL_STATUS_ZOR             = 0x40,
++      LIS302DL_STATUS_XYZOR           = 0x80,
++};
++
++/* Wakeup/freefall interrupt defs */
++enum lis302dl_reg_ffwucfg {
++      LIS302DL_FFWUCFG_XLIE           = 0x01,
++      LIS302DL_FFWUCFG_XHIE           = 0x02,
++      LIS302DL_FFWUCFG_YLIE           = 0x04,
++      LIS302DL_FFWUCFG_YHIE           = 0x08,
++      LIS302DL_FFWUCFG_ZLIE           = 0x10,
++      LIS302DL_FFWUCFG_ZHIE           = 0x20,
++      LIS302DL_FFWUCFG_LIR            = 0x40,
++      LIS302DL_FFWUCFG_AOI            = 0x80,
++};
++
++enum lis302dl_reg_ffwuths {
++      LIS302DL_FFWUTHS_DCRM           = 0x80,
++};
++
++enum lis302dl_reg_ffwusrc {
++      LIS302DL_FFWUSRC_XL             = 0x01,
++      LIS302DL_FFWUSRC_XH             = 0x02,
++      LIS302DL_FFWUSRC_YL             = 0x04,
++      LIS302DL_FFWUSRC_YH             = 0x08,
++      LIS302DL_FFWUSRC_ZL             = 0x10,
++      LIS302DL_FFWUSRC_ZH             = 0x20,
++      LIS302DL_FFWUSRC_IA             = 0x40,
++};
++
++enum lis302dl_reg_cloik_src {
++      LIS302DL_CLICKSRC_SINGLE_X      = 0x01,
++      LIS302DL_CLICKSRC_DOUBLE_X      = 0x02,
++      LIS302DL_CLICKSRC_SINGLE_Y      = 0x04,
++      LIS302DL_CLICKSRC_DOUBLE_Y      = 0x08,
++      LIS302DL_CLICKSRC_SINGLE_Z      = 0x10,
++      LIS302DL_CLICKSRC_DOUBLE_Z      = 0x20,
++      LIS302DL_CLICKSRC_IA            = 0x40,
++};
++
++#define LIS302DL_WHO_AM_I_MAGIC               0x3b
++
++#define LIS302DL_F_WUP_FF_1           0x0001  /* wake up from free fall */
++#define LIS302DL_F_WUP_FF_2           0x0002
++#define LIS302DL_F_WUP_FF             0x0003
++#define LIS302DL_F_WUP_CLICK  0x0004
++#define LIS302DL_F_POWER              0x0010
++#define LIS302DL_F_FS                 0x0020  /* ADC full scale */
++#define LIS302DL_F_INPUT_OPEN         0x0040  /* Set if input device is opened */
++#define LIS302DL_F_IRQ_WAKE   0x0080  /* IRQ is setup in wake mode */
++#define LIS302DL_F_DR                 0x0100  /* Data rate, 400Hz/100Hz */
++
++
++#endif /* _LINUX_LIS302DL_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/lp5521.h linux-2.6.29-rc3.owrt.om/include/linux/lp5521.h
+--- linux-2.6.29-rc3.owrt/include/linux/lp5521.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/lp5521.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,75 @@
++#ifndef _LINUX_LP5521_H_
++#define _LINUX_LP5521_H_
++
++#define LP5521_REG_ENABLE     0x00
++#define LP5521_REG_OP_MODE    0x01
++
++#define LP5521_REG_R_PWM      0x02
++#define LP5521_REG_G_PWM      0x03
++#define LP5521_REG_B_PWM      0x04
++
++#define LP5521_REG_R_CUR      0x05
++#define LP5521_REG_G_CUR      0x06
++#define LP5521_REG_B_CUR      0x07
++
++#define LP5521_REG_CONFIG     0x08
++
++#define LP5521_REG_R_PC               0x09
++#define LP5521_REG_G_PC               0x0a
++#define LP5521_REG_B_PC               0x0b
++
++#define LP5521_REG_STATUS     0x0c
++#define LP5521_REG_RESET      0x0d
++#define LP5521_REG_GPO                0x0e
++
++enum {
++      LP5521_NC,
++      LP5521_CONNECTED,
++};
++
++enum {
++      LP5521_BLUE,
++      LP5521_GREEN,
++      LP5521_RED,
++      LP5521_NUM_CH,
++};
++
++enum {
++      LP5521_MODE_DISABLE,
++      LP5521_MODE_LOAD,
++      LP5521_MODE_RUN,
++      LP5521_MODE_DIRECT,
++};
++
++enum CP_MODE {
++      LP5521_CPM_OFF,
++      LP5521_CPM_BY_PASS,
++      LP5521_CPM_1_5X,
++      LP5521_CPM_AUTO,
++};
++
++enum CLK_SRC {
++      LP5521_EXT_CLK,
++      LP5521_INT_CLK,
++      LP5521_AUTO_CLK,
++};
++
++#define LP5521_FEAT_TRIG      0x00000001
++#define LP5521_FEAT_GPO               0x00000002
++
++
++struct lp5521_platform_data {
++      int channels[LP5521_NUM_CH];
++      /* chip enable */
++      void (*ext_enable)(int level);
++};
++
++struct lp5521 {
++      struct device *dev;
++      struct i2c_client *client;
++      struct mutex lock;
++      int irq;
++
++      struct lp5521_platform_data *pdata;
++};
++#endif /* LINUX_LP5521_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/adc.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/adc.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/adc.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/adc.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,72 @@
++/*
++ * adc.h  -- Driver for NXP PCF50606 ADC
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_ADC_H
++#define __LINUX_MFD_PCF50606_ADC_H
++
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/platform_device.h>
++
++/* ADC Registers */
++#define PCF50606_REG_ADCC1 0x2e
++#define PCF50606_REG_ADCC2 0x2f
++#define PCF50606_REG_ADCS1 0x30
++#define PCF50606_REG_ADCS2 0x31
++#define PCF50606_REG_ADCS3 0x32
++
++#define PCF50606_ADCC1_TSCMODACT       0x01
++#define PCF50606_ADCC1_TSCMODSTB       0x02
++#define PCF50606_ADCC1_TRATSET                 0x04
++#define PCF50606_ADCC1_NTCSWAPE                0x08
++#define PCF50606_ADCC1_NTCSWAOFF       0x10
++#define PCF50606_ADCC1_EXTSYNCBREAK    0x20
++      /* reserved */
++#define PCF50606_ADCC1_TSCINT          0x80
++
++#define PCF50606_ADCC2_ADCSTART                0x01
++      /* see enum pcf50606_adcc2_adcmux */
++#define PCF50606_ADCC2_SYNC_NONE       0x00
++#define PCF50606_ADCC2_SYNC_TXON       0x20
++#define PCF50606_ADCC2_SYNC_PWREN1     0x40
++#define PCF50606_ADCC2_SYNC_PWREN2     0x60
++#define PCF50606_ADCC2_RES_10BIT       0x00
++#define PCF50606_ADCC2_RES_8BIT                0x80
++
++#define PCF50606_ADCC2_ADCMUX_MASK    (0xf << 1)
++
++#define ADCMUX_SHIFT  1
++#define PCF50606_ADCMUX_BATVOLT_RES    (0x0 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATVOLT_SUBTR  (0x1 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN1_RES     (0x2 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN1_SUBTR   (0x3 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATTEMP                (0x4 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN2                 (0x5 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN3                 (0x6 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN3_RATIO   (0x7 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_XPOS           (0x8 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_YPOS           (0x9 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_P1             (0xa << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_P2             (0xb << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATVOLT_ADCIN1         (0xc << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_XY_SEQUENCE    (0xe << ADCMUX_SHIFT)
++#define PCF50606_P1_P2_RESISTANCE      (0xf << ADCMUX_SHIFT)
++
++#define PCF50606_ADCS2_ADCRDY          0x80
++
++extern int
++pcf50606_adc_async_read(struct pcf50606 *pcf, int mux,
++              void (*callback)(struct pcf50606 *, void *, int),
++              void *callback_param);
++extern int
++pcf50606_adc_sync_read(struct pcf50606 *pcf, int mux);
++
++#endif /* __LINUX_PCF50606_ADC_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/core.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/core.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/core.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/core.h 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,170 @@
++/*
++ * core.h  -- Core driver for NXP PCF50606
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_CORE_H
++#define __LINUX_MFD_PCF50606_CORE_H
++
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++#include <linux/regulator/driver.h>
++#include <linux/regulator/machine.h>
++#include <linux/power_supply.h>
++
++struct pcf50606;
++
++#define PCF50606_NUM_REGULATORS       8
++
++struct pcf50606_platform_data {
++      struct regulator_init_data reg_init_data[PCF50606_NUM_REGULATORS];
++
++      char **batteries;
++      int num_batteries;
++
++      /* Callbacks */
++      void (*probe_done)(struct pcf50606 *);
++      void (*mbc_event_callback)(struct pcf50606 *, int);
++      void (*regulator_registered)(struct pcf50606 *, int);
++      void (*force_shutdown)(struct pcf50606 *);
++
++      u8 resumers[3];
++};
++
++struct pcf50606_subdev_pdata {
++      struct pcf50606 *pcf;
++};
++
++struct pcf50606_irq {
++      void (*handler)(int, void *);
++      void *data;
++};
++
++int pcf50606_register_irq(struct pcf50606 *pcf, int irq,
++                      void (*handler) (int, void *), void *data);
++int pcf50606_free_irq(struct pcf50606 *pcf, int irq);
++
++int pcf50606_irq_mask(struct pcf50606 *pcf, int irq);
++int pcf50606_irq_unmask(struct pcf50606 *pcf, int irq);
++int pcf50606_irq_mask_get(struct pcf50606 *pcf, int irq);
++
++int pcf50606_read_block(struct pcf50606 *, u8 reg,
++                                      int nr_regs, u8 *data);
++int pcf50606_write_block(struct pcf50606 *pcf, u8 reg,
++                                      int nr_regs, u8 *data);
++u8 pcf50606_reg_read(struct pcf50606 *, u8 reg);
++int pcf50606_reg_write(struct pcf50606 *pcf, u8 reg, u8 val);
++
++int pcf50606_reg_set_bit_mask(struct pcf50606 *pcf, u8 reg, u8 mask, u8 val);
++int pcf50606_reg_clear_bits(struct pcf50606 *pcf, u8 reg, u8 bits);
++
++/* Interrupt registers */
++
++#define PCF50606_REG_INT1     0x02
++#define       PCF50606_REG_INT2       0x03
++#define       PCF50606_REG_INT3       0x04
++
++#define PCF50606_REG_INT1M    0x05
++#define       PCF50606_REG_INT2M      0x06
++#define       PCF50606_REG_INT3M      0x07
++
++enum {
++      /* Chip IRQs */
++      PCF50606_IRQ_ONKEYR,
++      PCF50606_IRQ_ONKEYF,
++      PCF50606_IRQ_ONKEY1S,
++      PCF50606_IRQ_EXTONR,
++      PCF50606_IRQ_EXTONF,
++      PCF50606_IRQ_RESERVED_1,
++      PCF50606_IRQ_SECOND,
++      PCF50606_IRQ_ALARM,
++      PCF50606_IRQ_CHGINS,
++      PCF50606_IRQ_CHGRM,
++      PCF50606_IRQ_CHGFOK,
++      PCF50606_IRQ_CHGERR,
++      PCF50606_IRQ_CHGFRDY,
++      PCF50606_IRQ_CHGPROT,
++      PCF50606_IRQ_CHGWD10S,
++      PCF50606_IRQ_CHGWDEXP,
++      PCF50606_IRQ_ADCRDY,
++      PCF50606_IRQ_ACDINS,
++      PCF50606_IRQ_ACDREM,
++      PCF50606_IRQ_TSCPRES,
++      PCF50606_IRQ_RESERVED_2,
++      PCF50606_IRQ_RESERVED_3,
++      PCF50606_IRQ_LOWBAT,
++      PCF50606_IRQ_HIGHTMP,
++
++      /* Always last */
++      PCF50606_NUM_IRQ,
++};
++
++struct pcf50606 {
++      struct device *dev;
++      struct i2c_client *i2c_client;
++
++      struct pcf50606_platform_data *pdata;
++      int irq;
++      struct pcf50606_irq irq_handler[PCF50606_NUM_IRQ];
++      struct work_struct irq_work;
++      struct mutex lock;
++
++      u8 mask_regs[3];
++
++      u8 suspend_irq_masks[3];
++      u8 resume_reason[3];
++      int is_suspended;
++
++      int onkey1s_held;
++
++      struct platform_device *rtc_pdev;
++      struct platform_device *mbc_pdev;
++      struct platform_device *adc_pdev;
++      struct platform_device *input_pdev;
++      struct platform_device *wdt_pdev;
++      struct platform_device *regulator_pdev[PCF50606_NUM_REGULATORS];
++};
++
++enum pcf50606_reg_int1 {
++      PCF50606_INT1_ONKEYR    = 0x01, /* ONKEY rising edge */
++      PCF50606_INT1_ONKEYF    = 0x02, /* ONKEY falling edge */
++      PCF50606_INT1_ONKEY1S   = 0x04, /* OMKEY at least 1sec low */
++      PCF50606_INT1_EXTONR    = 0x08, /* EXTON rising edge */
++      PCF50606_INT1_EXTONF    = 0x10, /* EXTON falling edge */
++      PCF50606_INT1_SECOND    = 0x40, /* RTC periodic second interrupt */
++      PCF50606_INT1_ALARM     = 0x80, /* RTC alarm time is reached */
++};
++
++enum pcf50606_reg_int2 {
++      PCF50606_INT2_CHGINS    = 0x01, /* Charger inserted */
++      PCF50606_INT2_CHGRM     = 0x02, /* Charger removed */
++      PCF50606_INT2_CHGFOK    = 0x04, /* Fast charging OK */
++      PCF50606_INT2_CHGERR    = 0x08, /* Error in charging mode */
++      PCF50606_INT2_CHGFRDY   = 0x10, /* Fast charge completed */
++      PCF50606_INT2_CHGPROT   = 0x20, /* Charging protection interrupt */
++      PCF50606_INT2_CHGWD10S  = 0x40, /* Charger watchdig expires in 10s */
++      PCF50606_INT2_CHGWDEXP  = 0x80, /* Charger watchdog expires */
++};
++
++enum pcf50606_reg_int3 {
++      PCF50606_INT3_ADCRDY    = 0x01, /* ADC conversion finished */
++      PCF50606_INT3_ACDINS    = 0x02, /* Accessory inserted */
++      PCF50606_INT3_ACDREM    = 0x04, /* Accessory removed */
++      PCF50606_INT3_TSCPRES   = 0x08, /* Touch screen pressed */
++      PCF50606_INT3_LOWBAT    = 0x40, /* Low battery voltage */
++      PCF50606_INT3_HIGHTMP   = 0x80, /* High temperature */
++};
++
++/* Misc regs */
++
++#define PCF50606_REG_OOCC1    0x08
++#define PCF50606_OOCC1_GOSTDBY        0x01
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/gpo.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/gpo.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/gpo.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/gpo.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,42 @@
++/*
++ * gpo.h -- GPO driver for NXP PCF50606
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_GPO_H
++#define __LINUX_MFD_PCF50606_GPO_H
++
++#include <linux/mfd/pcf50633/core.h>
++
++#define PCF50606_REG_GPOC1 0x38
++#define PCF50606_REG_GPOC2 0x39
++#define PCF50606_REG_GPOC3 0x3a
++#define PCF50606_REG_GPOC4 0x3b
++#define PCF50606_REG_GPOC5 0x3c
++
++#define PCF50606_GPO1 PCF50606_REG_GPOC1
++#define PCF50606_GPO2 PCF50606_REG_GPOC1
++#define PCF50606_GPOOD1       PCF50606_REG_GPOC2
++#define PCF50606_GPOOD2       PCF50606_REG_GPOC3
++#define PCF50606_GPOOD3       PCF50606_REG_GPOC4
++#define PCF50606_GPOOD4       PCF50606_REG_GPOC5
++
++#define PCF50606_GPOCFG_GPOSEL_MASK   0x07
++
++void pcf50606_gpo_set_active(struct pcf50606 *pcf, int gpo, int value);
++int pcf50606_gpo_get_active(struct pcf50606 *pcf, int gpo);
++void pcf50606_gpo_set_standby(struct pcf50606 *pcf, int gpo, int value);
++int pcf50606_gpo_get_standby(struct pcf50606 *pcf, int gpo);
++
++void pcf50606_gpo_invert_set(struct pcf50606 *, int gpo, int invert);
++int pcf50606_gpo_invert_get(struct pcf50606 *pcf, int gpo);
++
++#endif /* __LINUX_MFD_PCF50606_GPIO_H */
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/mbc.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/mbc.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/mbc.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/mbc.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,52 @@
++/*
++ * mbc.h  -- Driver for NXP PCF50606 Main Battery Charger
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_MBC_H
++#define __LINUX_MFD_PCF50606_MBC_H
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/platform_device.h>
++
++#define PCF50606_REG_OOCS     0x01
++
++/* Charger OK */
++#define PCF50606_OOCS_CHGOK   0x20
++
++#define PCF50606_REG_MBCC1    0x29
++#define PCF50606_REG_MBCC2    0x2a
++#define PCF50606_REG_MBCC3    0x2b
++#define PCF50606_REG_MBCS1    0x2c
++
++#define PCF50606_MBCC1_CHGAPE         0x01
++#define PCF50606_MBCC1_AUTOFST                0x02
++#define PCF50606_MBCC1_CHGMOD_MASK    0x1c
++#define PCF50606_MBCC1_CHGMOD_QUAL    0x00
++#define PCF50606_MBCC1_CHGMOD_PRE     0x04
++#define PCF50606_MBCC1_CHGMOD_TRICKLE 0x08
++#define PCF50606_MBCC1_CHGMOD_FAST_CCCV       0x0c
++#define PCF50606_MBCC1_CHGMOD_FAST_NOCC       0x10
++#define PCF50606_MBCC1_CHGMOD_FAST_NOCV       0x14
++#define PCF50606_MBCC1_CHGMOD_FAST_SW 0x18
++#define PCF50606_MBCC1_CHGMOD_IDLE    0x1c
++#define PCF50606_MBCC1_DETMOD_LOWCHG  0x20
++#define PCF50606_MBCC1_DETMOD_WDRST   0x40
++
++#define PCF50606_MBCC1_CHGMOD_SHIFT   2
++
++/* Charger status */
++#define PCF50606_MBC_CHARGER_ONLINE   0x01
++#define PCF50606_MBC_CHARGER_ACTIVE   0x02
++
++void pcf50606_charge_fast(struct pcf50606 *pcf, int on);
++
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/pmic.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/pmic.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50606/pmic.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50606/pmic.h 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,73 @@
++#ifndef __LINUX_MFD_PCF50606_PMIC_H
++#define __LINUX_MFD_PCF50606_PMIC_H
++
++#define PCF50606_REG_DCDC1     0x1b
++#define PCF50606_REG_DCDC2     0x1c
++#define PCF50606_REG_DCDC3     0x1d
++#define PCF50606_REG_DCDC4     0x1e
++#define PCF50606_REG_DCDEC1    0x1f
++#define PCF50606_REG_DCDEC2    0x20
++#define PCF50606_REG_DCUDC1    0x21
++#define PCF50606_REG_DCUDC2    0x22
++#define PCF50606_REG_IOREGC    0x23
++#define PCF50606_REG_D1REGC1   0x24
++#define PCF50606_REG_D2REGC1   0x25
++#define PCF50606_REG_D3REGC1   0x26
++#define PCF50606_REG_LPREGC1   0x27
++#define PCF50606_REG_LPREGC2   0x28
++
++/* used by PSSC, PWROKM, PWROKS, */
++enum pcf50606_regu {
++      PCF50606_REGU_DCD       = 0x01, /* DCD in phase 2 */
++      PCF50606_REGU_DCDE      = 0x02, /* DCDE in phase 2 */
++      PCF50606_REGU_DCUD      = 0x04, /* DCDU in phase 2 */
++      PCF50606_REGU_IO        = 0x08, /* IO in phase 2 */
++      PCF50606_REGU_D1        = 0x10, /* D1 in phase 2 */
++      PCF50606_REGU_D2        = 0x20, /* D2 in phase 2 */
++      PCF50606_REGU_D3        = 0x40, /* D3 in phase 2 */
++      PCF50606_REGU_LP        = 0x80, /* LP in phase 2 */
++};
++
++enum pcf50606_reg_dcdc4 {
++      PCF50606_DCDC4_MODE_AUTO        = 0x00,
++      PCF50606_DCDC4_MODE_PWM         = 0x01,
++      PCF50606_DCDC4_MODE_PCF         = 0x02,
++      PCF50606_DCDC4_OFF_FLOAT        = 0x00,
++      PCF50606_DCDC4_OFF_BYPASS       = 0x04,
++      PCF50606_DCDC4_OFF_PULLDOWN     = 0x08,
++      PCF50606_DCDC4_CURLIM_500mA     = 0x00,
++      PCF50606_DCDC4_CURLIM_750mA     = 0x10,
++      PCF50606_DCDC4_CURLIM_1000mA    = 0x20,
++      PCF50606_DCDC4_CURLIM_1250mA    = 0x30,
++      PCF50606_DCDC4_TOGGLE           = 0x40,
++      PCF50606_DCDC4_REGSEL_DCDC2     = 0x80,
++};
++
++enum pcf50606_reg_dcdec2 {
++      PCF50606_DCDEC2_MODE_AUTO       = 0x00,
++      PCF50606_DCDEC2_MODE_PWM        = 0x01,
++      PCF50606_DCDEC2_MODE_PCF        = 0x02,
++      PCF50606_DCDEC2_OFF_FLOAT       = 0x00,
++      PCF50606_DCDEC2_OFF_BYPASS      = 0x04,
++};
++
++enum pcf50606_reg_dcudc2 {
++      PCF50606_DCUDC2_MODE_AUTO       = 0x00,
++      PCF50606_DCUDC2_MODE_PWM        = 0x01,
++      PCF50606_DCUDC2_MODE_PCF        = 0x02,
++      PCF50606_DCUDC2_OFF_FLOAT       = 0x00,
++      PCF50606_DCUDC2_OFF_BYPASS      = 0x04,
++};
++
++enum pcf50606_regulator_id {
++      PCF50606_REGULATOR_DCD,
++      PCF50606_REGULATOR_DCDE,
++      PCF50606_REGULATOR_DCUD,
++      PCF50606_REGULATOR_D1REG,
++      PCF50606_REGULATOR_D2REG,
++      PCF50606_REGULATOR_D3REG,
++      PCF50606_REGULATOR_LPREG,
++      PCF50606_REGULATOR_IOREG,
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50633/core.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50633/core.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50633/core.h    2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50633/core.h 2009-05-10 22:28:00.000000000 +0200
+@@ -29,6 +29,10 @@
+       char **batteries;
+       int num_batteries;
++      int charging_restart_interval;
++
++      int chg_ref_current_ma;
++
+       /* Callbacks */
+       void (*probe_done)(struct pcf50633 *);
+       void (*mbc_event_callback)(struct pcf50633 *, int);
+@@ -206,7 +210,8 @@
+ };
+ /* misc. registers */
+-#define PCF50633_REG_OOCSHDWN 0x0c
++#define PCF50633_REG_OOCSHDWN         0x0c
++#define PCF50633_OOCSHDWN_GOSTDBY     0x01
+ /* LED registers */
+ #define PCF50633_REG_LEDOUT 0x28
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50633/mbc.h linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50633/mbc.h
+--- linux-2.6.29-rc3.owrt/include/linux/mfd/pcf50633/mbc.h     2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/mfd/pcf50633/mbc.h  2009-05-10 22:28:00.000000000 +0200
+@@ -128,7 +128,5 @@
+ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
+ int pcf50633_mbc_get_status(struct pcf50633 *);
+-void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status);
+-
+ #endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mmc/core.h linux-2.6.29-rc3.owrt.om/include/linux/mmc/core.h
+--- linux-2.6.29-rc3.owrt/include/linux/mmc/core.h     2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/mmc/core.h  2009-05-10 22:28:00.000000000 +0200
+@@ -129,6 +129,8 @@
+ struct mmc_host;
+ struct mmc_card;
++extern void mmc_flush_scheduled_work(void);
++
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mmc/sdio_ids.h linux-2.6.29-rc3.owrt.om/include/linux/mmc/sdio_ids.h
+--- linux-2.6.29-rc3.owrt/include/linux/mmc/sdio_ids.h 2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/mmc/sdio_ids.h      2009-05-10 22:28:00.000000000 +0200
+@@ -25,5 +25,9 @@
+ #define SDIO_VENDOR_ID_MARVELL                        0x02df
+ #define SDIO_DEVICE_ID_MARVELL_LIBERTAS               0x9103
++#define SDIO_DEVICE_ID_MARVELL_88W8688                0x9104
++#define SDIO_VENDOR_ID_ATHEROS                        0x0271
++#define SDIO_DEVICE_ID_ATHEROS_AR6001         0x0100
++#define SDIO_DEVICE_ID_ATHEROS_AR6002         0x0200
+ #endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/mm.h linux-2.6.29-rc3.owrt.om/include/linux/mm.h
+--- linux-2.6.29-rc3.owrt/include/linux/mm.h   2009-05-10 22:09:07.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/mm.h        2009-05-10 22:28:00.000000000 +0200
+@@ -725,7 +725,7 @@
+ }
+ #endif
+ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
+-
++void shmem_set_file(struct vm_area_struct *, struct file *);
+ int shmem_zero_setup(struct vm_area_struct *);
+ #ifndef CONFIG_MMU
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/neo1973_vibrator.h linux-2.6.29-rc3.owrt.om/include/linux/neo1973_vibrator.h
+--- linux-2.6.29-rc3.owrt/include/linux/neo1973_vibrator.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/neo1973_vibrator.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,5 @@
++struct neo1973_vib_platform_data {
++      int (* enable_fiq)(void);
++      void (*disable_fiq)(void);
++      void (*kick_fiq)(void);
++};
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/pcap7200.h linux-2.6.29-rc3.owrt.om/include/linux/pcap7200.h
+--- linux-2.6.29-rc3.owrt/include/linux/pcap7200.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/pcap7200.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,25 @@
++#ifndef _LINUX_PCPA7200_H
++#define _LINUX_PCPA7200_H
++
++enum op_mode {
++      SLEEP,
++      WAKEUP,
++      SINGLE_TOUCH,
++      MULTI_TOUCH,
++};
++
++enum gesture {
++      ZOOM,
++      FST_ZOOM,
++      SND_ZOOM,
++      ROTATE,
++      FST_SLIDE,
++      SND_SLIDE,
++};
++
++struct pcap7200_platform_data {
++      enum op_mode mode;
++      void (*reset)(void);
++};
++
++#endif        /* _LINUX_PCPA7200_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/pcf50606.h linux-2.6.29-rc3.owrt.om/include/linux/pcf50606.h
+--- linux-2.6.29-rc3.owrt/include/linux/pcf50606.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/pcf50606.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,91 @@
++#ifndef _LINUX_PCF50606_H
++#define _LINUX_PCF50606_H
++
++#include <linux/pcf506xx.h>
++
++
++/* public in-kernel pcf50606 api */
++enum pcf50606_regulator_id {
++      PCF50606_REGULATOR_DCD,
++      PCF50606_REGULATOR_DCDE,
++      PCF50606_REGULATOR_DCUD,
++      PCF50606_REGULATOR_D1REG,
++      PCF50606_REGULATOR_D2REG,
++      PCF50606_REGULATOR_D3REG,
++      PCF50606_REGULATOR_LPREG,
++      PCF50606_REGULATOR_IOREG,
++      __NUM_PCF50606_REGULATORS
++};
++
++struct pcf50606_data;
++
++/* This is an ugly construct on how to access the (currently single/global)
++ * pcf50606 handle from other code in the kernel.  I didn't really come up with
++ * a more decent method of dynamically resolving this */
++extern struct pcf50606_data *pcf50606_global;
++
++extern void
++pcf50606_go_standby(void);
++
++extern void
++pcf50606_gpo0_set(struct pcf50606_data *pcf, int on);
++
++extern int
++pcf50606_gpo0_get(struct pcf50606_data *pcf);
++
++extern int
++pcf50606_voltage_set(struct pcf50606_data *pcf,
++                   enum pcf50606_regulator_id reg,
++                   unsigned int millivolts);
++extern unsigned int
++pcf50606_voltage_get(struct pcf50606_data *pcf,
++                   enum pcf50606_regulator_id reg);
++extern int
++pcf50606_onoff_get(struct pcf50606_data *pcf,
++                 enum pcf50606_regulator_id reg);
++
++extern int
++pcf50606_onoff_set(struct pcf50606_data *pcf,
++                 enum pcf50606_regulator_id reg, int on);
++
++extern void
++pcf50606_charge_fast(struct pcf50606_data *pcf, int on);
++
++
++#define PCF50606_FEAT_EXTON   0x00000001      /* not yet supported */
++#define PCF50606_FEAT_MBC     0x00000002
++#define PCF50606_FEAT_BBC     0x00000004      /* not yet supported */
++#define PCF50606_FEAT_TSC     0x00000008      /* not yet supported */
++#define PCF50606_FEAT_WDT     0x00000010
++#define PCF50606_FEAT_ACD     0x00000020
++#define PCF50606_FEAT_RTC     0x00000040
++#define PCF50606_FEAT_PWM     0x00000080
++#define PCF50606_FEAT_CHGCUR  0x00000100
++#define PCF50606_FEAT_BATVOLT 0x00000200
++#define PCF50606_FEAT_BATTEMP 0x00000400
++#define PCF50606_FEAT_PWM_BL  0x00000800
++
++struct pcf50606_platform_data {
++      /* general */
++      unsigned int used_features;
++      unsigned int onkey_seconds_required;
++
++      /* voltage regulator related */
++      struct pmu_voltage_rail rails[__NUM_PCF50606_REGULATORS];
++      unsigned int used_regulators;
++
++      /* charger related */
++      unsigned int r_fix_batt;
++      unsigned int r_fix_batt_par;
++      unsigned int r_sense_milli;
++
++      /* backlight related */
++      unsigned int init_brightness;
++
++      struct {
++              u_int8_t mbcc3; /* charger voltage / current */
++      } charger;
++      pmu_cb cb;
++};
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/pcf50633.h linux-2.6.29-rc3.owrt.om/include/linux/pcf50633.h
+--- linux-2.6.29-rc3.owrt/include/linux/pcf50633.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/pcf50633.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,176 @@
++#ifndef _LINUX_PCF50633_H
++#define _LINUX_PCF50633_H
++
++#include <linux/pcf506xx.h>
++#include <linux/regulator/machine.h>
++
++
++/* public in-kernel pcf50633 api */
++enum pcf50633_regulator_id {
++      PCF50633_REGULATOR_AUTO,
++      PCF50633_REGULATOR_DOWN1,
++      PCF50633_REGULATOR_DOWN2,
++      PCF50633_REGULATOR_MEMLDO,
++      PCF50633_REGULATOR_LDO1,
++      PCF50633_REGULATOR_LDO2,
++      PCF50633_REGULATOR_LDO3,
++      PCF50633_REGULATOR_LDO4,
++      PCF50633_REGULATOR_LDO5,
++      PCF50633_REGULATOR_LDO6,
++      PCF50633_REGULATOR_HCLDO,
++      __NUM_PCF50633_REGULATORS
++};
++
++enum pcf50633_reg_int1 {
++      PCF50633_INT1_ADPINS    = 0x01, /* Adapter inserted */
++      PCF50633_INT1_ADPREM    = 0x02, /* Adapter removed */
++      PCF50633_INT1_USBINS    = 0x04, /* USB inserted */
++      PCF50633_INT1_USBREM    = 0x08, /* USB removed */
++      /* reserved */
++      PCF50633_INT1_ALARM     = 0x40, /* RTC alarm time is reached */
++      PCF50633_INT1_SECOND    = 0x80, /* RTC periodic second interrupt */
++};
++
++enum pcf50633_reg_int2 {
++      PCF50633_INT2_ONKEYR    = 0x01, /* ONKEY rising edge */
++      PCF50633_INT2_ONKEYF    = 0x02, /* ONKEY falling edge */
++      PCF50633_INT2_EXTON1R   = 0x04, /* EXTON1 rising edge */
++      PCF50633_INT2_EXTON1F   = 0x08, /* EXTON1 falling edge */
++      PCF50633_INT2_EXTON2R   = 0x10, /* EXTON2 rising edge */
++      PCF50633_INT2_EXTON2F   = 0x20, /* EXTON2 falling edge */
++      PCF50633_INT2_EXTON3R   = 0x40, /* EXTON3 rising edge */
++      PCF50633_INT2_EXTON3F   = 0x80, /* EXTON3 falling edge */
++};
++
++enum pcf50633_reg_int3 {
++      PCF50633_INT3_BATFULL   = 0x01, /* Battery full */
++      PCF50633_INT3_CHGHALT   = 0x02, /* Charger halt */
++      PCF50633_INT3_THLIMON   = 0x04,
++      PCF50633_INT3_THLIMOFF  = 0x08,
++      PCF50633_INT3_USBLIMON  = 0x10,
++      PCF50633_INT3_USBLIMOFF = 0x20,
++      PCF50633_INT3_ADCRDY    = 0x40, /* ADC conversion finished */
++      PCF50633_INT3_ONKEY1S   = 0x80, /* ONKEY pressed 1 second */
++};
++
++enum pcf50633_reg_int4 {
++      PCF50633_INT4_LOWSYS            = 0x01,
++      PCF50633_INT4_LOWBAT            = 0x02,
++      PCF50633_INT4_HIGHTMP           = 0x04,
++      PCF50633_INT4_AUTOPWRFAIL       = 0x08,
++      PCF50633_INT4_DWN1PWRFAIL       = 0x10,
++      PCF50633_INT4_DWN2PWRFAIL       = 0x20,
++      PCF50633_INT4_LEDPWRFAIL        = 0x40,
++      PCF50633_INT4_LEDOVP            = 0x80,
++};
++
++enum pcf50633_reg_int5 {
++      PCF50633_INT5_LDO1PWRFAIL       = 0x01,
++      PCF50633_INT5_LDO2PWRFAIL       = 0x02,
++      PCF50633_INT5_LDO3PWRFAIL       = 0x04,
++      PCF50633_INT5_LDO4PWRFAIL       = 0x08,
++      PCF50633_INT5_LDO5PWRFAIL       = 0x10,
++      PCF50633_INT5_LDO6PWRFAIL       = 0x20,
++      PCF50633_INT5_HCLDOPWRFAIL      = 0x40,
++      PCF50633_INT5_HCLDOOVL          = 0x80,
++};
++
++struct pcf50633_data;
++extern struct pcf50633_data *pcf50633_global;
++
++extern void
++pcf50633_go_standby(void);
++
++enum pcf50633_gpio {
++      PCF50633_GPIO1 = 1,
++      PCF50633_GPIO2 = 2,
++      PCF50633_GPIO3 = 3,
++      PCF50633_GPO = 4,
++};
++
++extern void
++pcf50633_gpio_set(struct pcf50633_data *pcf, enum pcf50633_gpio gpio, int on);
++
++extern int
++pcf50633_gpio_get(struct pcf50633_data *pcf, enum pcf50633_gpio gpio);
++
++extern int
++pcf50633_voltage_set(struct pcf50633_data *pcf,
++                   enum pcf50633_regulator_id reg,
++                   unsigned int millivolts);
++extern unsigned int
++pcf50633_voltage_get(struct pcf50633_data *pcf,
++                   enum pcf50633_regulator_id reg);
++
++extern int
++pcf50633_onoff_get(struct pcf50633_data *pcf,
++                 enum pcf50633_regulator_id reg);
++
++extern int
++pcf50633_onoff_set(struct pcf50633_data *pcf,
++                 enum pcf50633_regulator_id reg, int on);
++
++extern void
++pcf50633_backlight_resume(struct pcf50633_data *pcf);
++
++extern u_int16_t
++pcf50633_battvolt(struct pcf50633_data *pcf);
++
++extern int
++pcf50633_report_resumers(struct pcf50633_data *pcf, char *buf);
++
++extern int
++pcf50633_notify_usb_current_limit_change(struct pcf50633_data *pcf,
++                                                             unsigned int ma);
++extern int
++pcf50633_wait_for_ready(struct pcf50633_data *pcf, int timeout_ms,
++                                                              char *name);
++
++/* 0 = initialized and resumed and ready to roll, !=0 = either not
++ * initialized or not resumed yet
++ */
++extern int
++pcf50633_ready(struct pcf50633_data *pcf);
++
++#define PCF50633_FEAT_EXTON   0x00000001      /* not yet supported */
++#define PCF50633_FEAT_MBC     0x00000002
++#define PCF50633_FEAT_BBC     0x00000004      /* not yet supported */
++#define PCF50633_FEAT_RTC     0x00000040
++#define PCF50633_FEAT_CHGCUR  0x00000100
++#define PCF50633_FEAT_BATVOLT 0x00000200
++#define PCF50633_FEAT_BATTEMP 0x00000400
++#define PCF50633_FEAT_PWM_BL  0x00000800
++
++struct pcf50633_platform_data {
++      /* general */
++      unsigned int used_features;
++      unsigned int onkey_seconds_sig_init;
++      unsigned int onkey_seconds_shutdown;
++
++      /* callback to attach platform children (to enforce suspend / resume
++       * ordering */
++      void (*attach_child_devices)(struct device *parent_device);
++
++      /* voltage regulator related */
++      struct pmu_voltage_rail rails[__NUM_PCF50633_REGULATORS];
++      unsigned int used_regulators;
++
++      /* charger related */
++      unsigned int r_fix_batt;
++      unsigned int r_fix_batt_par;
++      unsigned int r_sense_milli;
++      int flag_use_apm_emulation;
++
++      unsigned char resumers[5];
++
++      struct {
++              u_int8_t mbcc3; /* charger voltage / current */
++      } charger;
++      pmu_cb cb;
++
++      /* post-resume backlight bringup */
++      int defer_resume_backlight;
++      u8 resume_backlight_ramp_speed;
++};
++
++#endif /* _PCF50633_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/pcf506xx.h linux-2.6.29-rc3.owrt.om/include/linux/pcf506xx.h
+--- linux-2.6.29-rc3.owrt/include/linux/pcf506xx.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/pcf506xx.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,34 @@
++#ifndef _LINUX_PCF506XX_H
++#define _LINUX_PCF506XX_H
++
++
++#define PMU_VRAIL_F_SUSPEND_ON        0x00000001      /* Remains on during suspend */
++#define PMU_VRAIL_F_UNUSED    0x00000002      /* This rail is not used */
++struct pmu_voltage_rail {
++      char *name;
++      unsigned int flags;
++      struct {
++              unsigned int init;
++              unsigned int max;
++      } voltage;
++};
++
++enum pmu_event {
++      PMU_EVT_NONE,
++      PMU_EVT_INSERT,
++      PMU_EVT_REMOVE,
++#ifdef CONFIG_SENSORS_PCF50633
++      PMU_EVT_USB_INSERT,
++      PMU_EVT_USB_REMOVE,
++#endif
++      PMU_EVT_CHARGER_ACTIVE,
++      PMU_EVT_CHARGER_IDLE,
++      PMU_EVT_CHARGER_CHANGE,
++      __NUM_PMU_EVTS
++};
++
++typedef int (*pmu_cb)(struct device *dev, unsigned int feature,
++                 enum pmu_event event);
++
++
++#endif /* !_LINUX_PCF506XX_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/resume-dependency.h linux-2.6.29-rc3.owrt.om/include/linux/resume-dependency.h
+--- linux-2.6.29-rc3.owrt/include/linux/resume-dependency.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/resume-dependency.h 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,114 @@
++#ifndef __RESUME_DEPENDENCY_H__
++#define __RESUME_DEPENDENCY_H__
++
++/* Resume dependency framework
++ *
++ * (C) 2008 Openmoko, Inc.
++ * Author: Andy Green <andy@openmoko.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; version 2.1.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/list.h>
++
++struct resume_dependency {
++      struct list_head list;
++
++      void (*callback)(void *); /* called with context as arg */
++      void * context;
++      int called_flag; /* set to 1 after called, use for multi dep */
++};
++
++/* if you are a driver accept to have other drivers as dependencies, you need to
++ * instantiate a struct resume_dependency above, then initialize it by invoking
++ * init_resume_dependency_list() on it
++ */
++
++#define init_resume_dependency_list(_head) \
++      printk(KERN_INFO "##### init_resume_dependency_list(head=%p)\n", (_head)); \
++      INIT_LIST_HEAD(&(_head)->list);
++
++
++/* if your resume function depends on something else being resumed first, you
++ * can register the dependency by calling this in your suspend function with
++ * head being the list held by the thing you are dependent on, and dep being
++ * your struct resume_dependency
++ */
++
++#define register_resume_dependency(_head, _dep) { \
++      struct list_head *_pos, *_q; \
++      struct resume_dependency *_d; \
++\
++      printk(KERN_ERR "##### register_resume_dependency(head=%p, dep=%p)\n", (_head), (_dep)); \
++      (_dep)->called_flag = 1; \
++      list_for_each_safe(_pos, _q, &((_head)->list)) { \
++              _d = list_entry(_pos, struct resume_dependency, list); \
++              if (_d == (_dep)) { \
++                      list_del(_pos); \
++                      printk(KERN_ERR "#####   duplicate dependency removed first\n"); \
++              } \
++      } \
++      list_add(&(_dep)->list, &(_head)->list); \
++}
++
++/* In the resume function that things can be dependent on, at the end you
++ * invoke this macro.  This calls back the dependent resumes now it is safe to
++ * use the resumed thing they were dependent on.
++ */
++
++#define callback_all_resume_dependencies(_head) { \
++      struct list_head *_pos, *_q; \
++      struct resume_dependency *_dep; \
++\
++      printk(KERN_ERR "##### callback_all_resume_dependencies(head=%p)\n", (_head)); \
++      list_for_each_safe(_pos, _q, &((_head)->list)) { \
++              _dep = list_entry(_pos, struct resume_dependency, list); \
++              printk(KERN_ERR "#####   callback list entry (head=%p, dep=%p)\n", (_head), (_dep)); \
++              _dep->called_flag = 1; \
++              printk(KERN_ERR "#####      callback=%p(context=%p))\n", (_dep->callback),(_dep->context)); \
++              (_dep->callback)(_dep->context); \
++              list_del(_pos); \
++      } \
++}
++
++/* When a dependency is added, it is not actually active; the dependent resume
++ * handler will function as normal.  The dependency is activated by the suspend
++ * handler for the driver that will be doing the callbacks.  This ensures that
++ * if the suspend is aborted for any reason (error, driver busy, etc), that all
++ * suspended drivers will resume, even if the driver upon which they are dependent
++ * did not suspend, and hence will not resume, and thus would be unable to perform
++ * the callbacks.
++ */
++
++#define activate_all_resume_dependencies(_head) { \
++      struct list_head *_pos, *_q; \
++      struct resume_dependency *_dep; \
++\
++      printk(KERN_ERR "##### activate_all_resume_dependencies(head=%p)\n", (_head)); \
++      list_for_each_safe(_pos, _q, &((_head)->list)) { \
++              _dep = list_entry(_pos, struct resume_dependency, list); \
++              printk(KERN_ERR "#####   activating callback list entry (head=%p, dep=%p)\n", (_head), (_dep)); \
++              _dep->called_flag = 0; \
++      } \
++}
++
++/* if your resume action is dependent on multiple drivers being resumed already,
++ * register the same callback with each driver you are dependent on, and check
++ * .called_flag for all of the struct resume_dependency.  When they are all 1
++ * you know it is the last callback and you can resume, otherwise just return
++ */
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/rtc/pcf50633.h linux-2.6.29-rc3.owrt.om/include/linux/rtc/pcf50633.h
+--- linux-2.6.29-rc3.owrt/include/linux/rtc/pcf50633.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/rtc/pcf50633.h      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,9 @@
++enum pcf50633_rtc_event {
++        PCF50633_RTC_EVENT_ALARM,
++        PCF50633_RTC_EVENT_SECOND,
++};
++
++extern void pcf50633_rtc_handle_event(struct pcf50633_data *pcf,
++                                        enum pcf50633_rtc_event evt);
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/spi/glamo.h linux-2.6.29-rc3.owrt.om/include/linux/spi/glamo.h
+--- linux-2.6.29-rc3.owrt/include/linux/spi/glamo.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/spi/glamo.h 2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,27 @@
++#ifndef __GLAMO_SPI_H
++#define __GLAMO_SPI_H
++
++#include <linux/glamo-gpio.h>
++
++struct spi_board_info;
++struct glamofb_handle;
++struct glamo_core;
++
++struct glamo_spi_info {
++      unsigned long           board_size;
++      struct spi_board_info   *board_info;
++      struct glamofb_handle   *glamofb_handle;
++};
++
++struct glamo_spigpio_info {
++      unsigned int            pin_clk;
++      unsigned int            pin_mosi;
++      unsigned int            pin_miso;
++      unsigned int            pin_cs;
++      int                     bus_num;
++
++      struct glamo_core       *glamo;
++};
++
++
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/spi/spi_bitbang.h linux-2.6.29-rc3.owrt.om/include/linux/spi/spi_bitbang.h
+--- linux-2.6.29-rc3.owrt/include/linux/spi/spi_bitbang.h      2009-05-10 22:09:08.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/spi/spi_bitbang.h   2009-05-10 22:28:00.000000000 +0200
+@@ -31,6 +31,9 @@
+       u8                      use_dma;
+       u8                      flags;          /* extra spi->mode support */
++      /* Support for synchronous non blocking transfers */
++      int                     non_blocking_transfer; 
++
+       struct spi_master       *master;
+       /* setup_transfer() changes clock and/or wordsize to match settings
+@@ -62,6 +65,8 @@
+ extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+                                     struct spi_transfer *t);
++extern int spi_bitbang_transfer_sync(struct spi_device *spi,
++                                    struct spi_message *m);
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/spi/spi.h linux-2.6.29-rc3.owrt.om/include/linux/spi/spi.h
+--- linux-2.6.29-rc3.owrt/include/linux/spi/spi.h      2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/spi/spi.h   2009-05-10 22:28:00.000000000 +0200
+@@ -264,6 +264,13 @@
+       int                     (*transfer)(struct spi_device *spi,
+                                               struct spi_message *mesg);
++      /* 
++       * Synchronous non blocking transfer function. Should guarantee
++       * data availability when it returns 
++       */
++      int                     (*transfer_sync)(struct spi_device *spi,
++                                              struct spi_message *mesg);
++
+       /* called on release() to free memory provided by spi_master */
+       void                    (*cleanup)(struct spi_device *spi);
+ };
+@@ -573,6 +580,29 @@
+       return spi->master->transfer(spi, message);
+ }
++/**
++ * spi_non_blocking_transfer - Synchronous, non blocking transfer
++ * @spi: device with which data will be exchanged
++ * @message: describes the data transfers with optional completion handlers
++ * Context: any (irqs may be blocked, etc)
++ *
++ * Data is guaranteed to be written or read when this function returns.
++ *
++ * Note : This may not be supported by all spi masters.
++ */
++
++static inline int
++spi_non_blocking_transfer(struct spi_device *spi, struct spi_message *message)
++{
++      if (unlikely(!spi->master->transfer_sync)) {
++              dev_err(&spi->master->dev,
++                              "non-blocking transfers not supported\n");
++              return -EIO;
++      }
++
++      return spi->master->transfer_sync(spi, message);
++}
++
+ /*---------------------------------------------------------------------------*/
+ /* All these synchronous SPI transfer routines are utilities layered
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/suspend.h linux-2.6.29-rc3.owrt.om/include/linux/suspend.h
+--- linux-2.6.29-rc3.owrt/include/linux/suspend.h      2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/suspend.h   2009-05-10 22:28:00.000000000 +0200
+@@ -146,6 +146,12 @@
+       struct pbe *next;
+ };
++/**
++ * global indication we are somewhere between start of suspend and end of
++ * resume, nonzero is true
++ */
++extern int global_inside_suspend;
++
+ /* mm/page_alloc.c */
+ extern void mark_free_pages(struct zone *zone);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/vt.h linux-2.6.29-rc3.owrt.om/include/linux/vt.h
+--- linux-2.6.29-rc3.owrt/include/linux/vt.h   2009-05-10 22:04:47.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/linux/vt.h        2009-05-10 22:28:00.000000000 +0200
+@@ -18,8 +18,19 @@
+  * resizing).
+  */
+ #define MIN_NR_CONSOLES 1       /* must be at least 1 */
++#if (CONFIG_NR_TTY_DEVICES < 4)
++/* Lower Limit */
++#define MAX_NR_CONSOLES       4       /* serial lines start at 64 */
++#define MAX_NR_USER_CONSOLES 4        /* must be root to allocate above this */
++#elif (CONFIG_NR_TTY_DEVICES > 63)
++/* Upper Limit */
+ #define MAX_NR_CONSOLES       63      /* serial lines start at 64 */
+ #define MAX_NR_USER_CONSOLES 63       /* must be root to allocate above this */
++#else
++/* They chose a sensible number */
++#define MAX_NR_CONSOLES CONFIG_NR_TTY_DEVICES
++#define MAX_NR_USER_CONSOLES CONFIG_NR_TTY_DEVICES
++#endif
+               /* Note: the ioctl VT_GETSTATE does not work for
+                  consoles 16 and higher (since it returns a short) */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/linux/wakelock.h linux-2.6.29-rc3.owrt.om/include/linux/wakelock.h
+--- linux-2.6.29-rc3.owrt/include/linux/wakelock.h     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/include/linux/wakelock.h  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,91 @@
++/* include/linux/wakelock.h
++ *
++ * Copyright (C) 2007-2008 Google, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _LINUX_WAKELOCK_H
++#define _LINUX_WAKELOCK_H
++
++#include <linux/list.h>
++#include <linux/ktime.h>
++
++/* A wake_lock prevents the system from entering suspend or other low power
++ * states when active. If the type is set to WAKE_LOCK_SUSPEND, the wake_lock
++ * prevents a full system suspend. If the type is WAKE_LOCK_IDLE, low power
++ * states that cause large interrupt latencies or that disable a set of
++ * interrupts will not entered from idle until the wake_locks are released.
++ */
++
++enum {
++      WAKE_LOCK_SUSPEND, /* Prevent suspend */
++      WAKE_LOCK_IDLE,    /* Prevent low power idle */
++      WAKE_LOCK_TYPE_COUNT
++};
++
++struct wake_lock {
++#ifdef CONFIG_ANDROID_HAS_WAKELOCK
++      struct list_head    link;
++      int                 flags;
++      const char         *name;
++      unsigned long       expires;
++#ifdef CONFIG_ANDROID_WAKELOCK_STAT
++      struct {
++              int             count;
++              int             expire_count;
++              int             wakeup_count;
++              ktime_t         total_time;
++              ktime_t         prevent_suspend_time;
++              ktime_t         max_time;
++              ktime_t         last_time;
++      } stat;
++#endif
++#endif
++};
++
++#ifdef CONFIG_ANDROID_HAS_WAKELOCK
++
++void wake_lock_init(struct wake_lock *lock, int type, const char *name);
++void wake_lock_destroy(struct wake_lock *lock);
++void wake_lock(struct wake_lock *lock);
++void wake_lock_timeout(struct wake_lock *lock, long timeout);
++void wake_unlock(struct wake_lock *lock);
++
++/* wake_lock_active returns a non-zero value if the wake_lock is currently
++ * locked. If the wake_lock has a timeout, it does not check the timeout
++ * but if the timeout had aready been checked it will return 0.
++ */
++int wake_lock_active(struct wake_lock *lock);
++
++/* has_wake_lock returns 0 if no wake locks of the specified type are active,
++ * and non-zero if one or more wake locks are held. Specifically it returns
++ * -1 if one or more wake locks with no timeout are active or the
++ * number of jiffies until all active wake locks time out.
++ */
++long has_wake_lock(int type);
++
++#else
++
++static inline void wake_lock_init(struct wake_lock *lock, int type,
++                                      const char *name) {}
++static inline void wake_lock_destroy(struct wake_lock *lock) {}
++static inline void wake_lock(struct wake_lock *lock) {}
++static inline void wake_lock_timeout(struct wake_lock *lock, long timeout) {}
++static inline void wake_unlock(struct wake_lock *lock) {}
++
++static inline int wake_lock_active(struct wake_lock *lock) { return 0; }
++static inline long has_wake_lock(int type) { return 0; }
++
++#endif
++
++#endif
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/include/sound/soc-dapm.h linux-2.6.29-rc3.owrt.om/include/sound/soc-dapm.h
+--- linux-2.6.29-rc3.owrt/include/sound/soc-dapm.h     2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/include/sound/soc-dapm.h  2009-05-10 22:28:00.000000000 +0200
+@@ -182,6 +182,15 @@
+       .get = snd_soc_dapm_get_value_enum_double, \
+       .put = snd_soc_dapm_put_value_enum_double, \
+       .private_value = (unsigned long)&xenum }
++/* NOTE: Openmoko-specific "DAPM " prefix added to controls for
++ * backwards compatibility.
++ */
++#define SOC_DAPM_PIN_SWITCH(xname) \
++{     .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "DAPM " xname " Switch", \
++      .info = snd_soc_dapm_info_pin_switch, \
++      .get = snd_soc_dapm_get_pin_switch, \
++      .put = snd_soc_dapm_put_pin_switch, \
++      .private_value = (unsigned long)xname }
+ /* dapm stream operations */
+ #define SND_SOC_DAPM_STREAM_NOP                       0x0
+@@ -228,6 +237,12 @@
+       struct snd_ctl_elem_value *ucontrol);
+ int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
+       struct snd_ctl_elem_value *ucontrol);
++int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_info *uinfo);
++int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *uncontrol);
++int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *uncontrol);
+ int snd_soc_dapm_new_control(struct snd_soc_codec *codec,
+       const struct snd_soc_dapm_widget *widget);
+ int snd_soc_dapm_new_controls(struct snd_soc_codec *codec,
+@@ -250,12 +265,19 @@
+ int snd_soc_dapm_sys_add(struct device *dev);
+ /* dapm audio pin control and status */
+-int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin);
+-int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin);
+-int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin);
+-int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin);
++int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin);
++int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin);
++int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin);
++int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin);
+ int snd_soc_dapm_sync(struct snd_soc_codec *codec);
++/* dapm audio endpoint control */
++int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec,
++      char *pin, int status);
++int snd_soc_dapm_get_endpoint(struct snd_soc_codec *codec,
++      char *pin);
++int snd_soc_dapm_sync_endpoints(struct snd_soc_codec *codec);
++
+ /* dapm widget types */
+ enum snd_soc_dapm_type {
+       snd_soc_dapm_input = 0,         /* input pin */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/init/Kconfig linux-2.6.29-rc3.owrt.om/init/Kconfig
+--- linux-2.6.29-rc3.owrt/init/Kconfig 2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/init/Kconfig      2009-05-10 22:28:00.000000000 +0200
+@@ -869,6 +869,15 @@
+           by some high performance threaded applications. Disabling
+           this option saves about 7k.
++config ASHMEM
++      bool "Enable Android's Shared Memory Subsystem"
++      default n
++      depends on SHMEM || TINY_SHMEM
++      help
++        The ashmem subsystem is a new shared memory allocator, similar to
++        POSIX SHM but with different behavior and sporting a simpler
++        file-based API.
++
+ config VM_EVENT_COUNTERS
+       default y
+       bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/irq/chip.c linux-2.6.29-rc3.owrt.om/kernel/irq/chip.c
+--- linux-2.6.29-rc3.owrt/kernel/irq/chip.c    2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/irq/chip.c 2009-05-10 22:28:00.000000000 +0200
+@@ -383,6 +383,7 @@
+ out_unlock:
+       spin_unlock(&desc->lock);
+ }
++EXPORT_SYMBOL(handle_level_irq);
+ /**
+  *    handle_fasteoi_irq - irq handler for transparent controllers
+@@ -593,6 +594,7 @@
+       }
+       spin_unlock_irqrestore(&desc->lock, flags);
+ }
++EXPORT_SYMBOL(__set_irq_handler);
+ void
+ set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/power/main.c linux-2.6.29-rc3.owrt.om/kernel/power/main.c
+--- linux-2.6.29-rc3.owrt/kernel/power/main.c  2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/power/main.c       2009-05-10 22:28:00.000000000 +0200
+@@ -131,6 +131,9 @@
+ #endif /* CONFIG_PM_SLEEP */
++int global_inside_suspend;
++EXPORT_SYMBOL(global_inside_suspend);
++
+ #ifdef CONFIG_SUSPEND
+ #ifdef CONFIG_PM_TEST_SUSPEND
+@@ -321,6 +324,8 @@
+       if (!suspend_ops)
+               return -ENOSYS;
++      global_inside_suspend = 1;
++
+       if (suspend_ops->begin) {
+               error = suspend_ops->begin(state);
+               if (error)
+@@ -362,6 +367,8 @@
+  Close:
+       if (suspend_ops->end)
+               suspend_ops->end();
++      global_inside_suspend = 0;
++
+       return error;
+  Recover_platform:
+@@ -388,6 +395,9 @@
+ static const char * const pm_states[PM_SUSPEND_MAX] = {
++#ifdef CONFIG_ANDROID_EARLYSUSPEND
++      [PM_SUSPEND_ON]         = "on",
++#endif
+       [PM_SUSPEND_STANDBY]    = "standby",
+       [PM_SUSPEND_MEM]        = "mem",
+ };
+@@ -424,6 +434,8 @@
+               return -EBUSY;
+       printk(KERN_INFO "PM: Syncing filesystems ... ");
++      global_inside_suspend = 1;
++
+       sys_sync();
+       printk("done.\n");
+@@ -505,7 +517,11 @@
+                          const char *buf, size_t n)
+ {
+ #ifdef CONFIG_SUSPEND
++#ifdef CONFIG_ANDROID_EARLYSUSPEND
++      suspend_state_t state = PM_SUSPEND_ON;
++#else
+       suspend_state_t state = PM_SUSPEND_STANDBY;
++#endif
+       const char * const *s;
+ #endif
+       char *p;
+@@ -527,8 +543,15 @@
+                       break;
+       }
+       if (state < PM_SUSPEND_MAX && *s)
++#ifdef CONFIG_ANDROID_EARLYSUSPEND
++              if (state == PM_SUSPEND_ON || valid_state(state)) {
++                      error = 0;
++                      request_suspend_state(state);
++              }
++#else
+               error = enter_state(state);
+ #endif
++#endif
+  Exit:
+       return error ? error : n;
+@@ -561,6 +584,12 @@
+ power_attr(pm_trace);
+ #endif /* CONFIG_PM_TRACE */
++#ifdef CONFIG_ANDROID_USER_WAKELOCK
++power_attr(wake_lock);
++power_attr(wake_full_lock);
++power_attr(wake_unlock);
++#endif
++
+ static struct attribute * g[] = {
+       &state_attr.attr,
+ #ifdef CONFIG_PM_TRACE
+@@ -569,6 +598,11 @@
+ #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PM_DEBUG)
+       &pm_test_attr.attr,
+ #endif
++#ifdef CONFIG_ANDROID_USER_WAKELOCK
++      &wake_lock_attr.attr,
++      &wake_unlock_attr.attr,
++      &wake_full_lock_attr.attr,
++#endif
+       NULL,
+ };
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/power/power.h linux-2.6.29-rc3.owrt.om/kernel/power/power.h
+--- linux-2.6.29-rc3.owrt/kernel/power/power.h 2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/power/power.h      2009-05-10 22:28:00.000000000 +0200
+@@ -223,3 +223,32 @@
+ {
+ }
+ #endif
++
++#ifdef CONFIG_ANDROID_WAKELOCK
++/* kernel/power/wakelock.c */
++extern struct workqueue_struct *suspend_work_queue;
++extern struct wake_lock main_wake_lock;
++extern suspend_state_t requested_suspend_state;
++#endif
++
++#ifdef CONFIG_ANDROID_USER_WAKELOCK
++ssize_t wake_lock_show(struct kobject *kobj, struct kobj_attribute *attr,
++                      char *buf);
++ssize_t wake_lock_store(struct kobject *kobj, struct kobj_attribute *attr,
++                      const char *buf, size_t n);
++ssize_t wake_full_lock_store(struct kobject *kobj, struct kobj_attribute *attr,
++                              const char *buf, size_t n);
++
++#define wake_full_lock_show wake_lock_show
++
++ssize_t wake_unlock_show(struct kobject *kobj, struct kobj_attribute *attr,
++                      char *buf);
++ssize_t  wake_unlock_store(struct kobject *kobj, struct kobj_attribute *attr,
++                      const char *buf, size_t n);
++#endif
++
++#ifdef CONFIG_ANDROID_EARLYSUSPEND
++/* kernel/power/earlysuspend.c */
++void request_suspend_state(suspend_state_t state);
++suspend_state_t get_suspend_state(void);
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/power/process.c linux-2.6.29-rc3.owrt.om/kernel/power/process.c
+--- linux-2.6.29-rc3.owrt/kernel/power/process.c       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/power/process.c    2009-05-10 22:28:00.000000000 +0200
+@@ -13,6 +13,7 @@
+ #include <linux/module.h>
+ #include <linux/syscalls.h>
+ #include <linux/freezer.h>
++#include <linux/wakelock.h>
+ /* 
+  * Timeout for stopping processes
+@@ -36,6 +37,7 @@
+       struct timeval start, end;
+       u64 elapsed_csecs64;
+       unsigned int elapsed_csecs;
++      unsigned int wakeup = 0;
+       do_gettimeofday(&start);
+@@ -62,6 +64,10 @@
+               } while_each_thread(g, p);
+               read_unlock(&tasklist_lock);
+               yield();                        /* Yield is okay here */
++              if (todo && has_wake_lock(WAKE_LOCK_SUSPEND)) {
++                      wakeup = 1;
++                      break;
++              }
+               if (time_after(jiffies, end_time))
+                       break;
+       } while (todo);
+@@ -77,11 +83,17 @@
+                * and caller must call thaw_processes() if something fails),
+                * but it cleans up leftover PF_FREEZE requests.
+                */
+-              printk("\n");
+-              printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds "
++              if (wakeup) {
++                      printk("\n");
++                      printk(KERN_ERR "Freezing of %s aborted\n",
++                              sig_only ? "user space " : "tasks ");
++              } else {
++                      printk("\n");
++                      printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds "
+                               "(%d tasks refusing to freeze):\n",
+                               elapsed_csecs / 100, elapsed_csecs % 100, todo);
+-              show_state();
++                      show_state();
++              }
+               read_lock(&tasklist_lock);
+               do_each_thread(g, p) {
+                       task_lock(p);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/printk.c linux-2.6.29-rc3.owrt.om/kernel/printk.c
+--- linux-2.6.29-rc3.owrt/kernel/printk.c      2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/printk.c   2009-05-10 22:28:00.000000000 +0200
+@@ -32,8 +32,11 @@
+ #include <linux/security.h>
+ #include <linux/bootmem.h>
+ #include <linux/syscalls.h>
++#include <linux/jiffies.h>
++#include <linux/suspend.h>
+ #include <asm/uaccess.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ /*
+  * Architectures can override it:
+@@ -67,13 +70,21 @@
+ int oops_in_progress;
+ EXPORT_SYMBOL(oops_in_progress);
++void (*printk_emergency_debug_spew_init)(void) = NULL;
++EXPORT_SYMBOL(printk_emergency_debug_spew_init);
++
++void (*printk_emergency_debug_spew_send_string)(const char *) = NULL;
++EXPORT_SYMBOL(printk_emergency_debug_spew_send_string);
++
+ /*
+  * console_sem protects the console_drivers list, and also
+  * provides serialisation for access to the entire console
+  * driver system.
+  */
+ static DECLARE_MUTEX(console_sem);
++#ifndef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
+ static DECLARE_MUTEX(secondary_console_sem);
++#endif
+ struct console *console_drivers;
+ EXPORT_SYMBOL_GPL(console_drivers);
+@@ -667,8 +678,39 @@
+       /* Emit the output into the temporary buffer */
+       printed_len += vscnprintf(printk_buf + printed_len,
+                                 sizeof(printk_buf) - printed_len, fmt, args);
+-
+-
++#if defined(CONFIG_MACH_NEO1973_GTA02) && defined(CONFIG_PM)
++      /* if you're debugging resume, the normal methods can change resume
++       * ordering behaviours because their debugging output is synchronous
++       * (ie, CONFIG_DEBUG_LL).  If your problem is an OOPS, this code
++       * will not affect the speed and duration and ordering of resume
++       * actions, but will give you a chance to read the full undumped
++       * syslog AND the OOPS data when it happens
++       *
++       * if you support it, your debug device init can override the exported
++       * emergency_debug_spew_init and emergency_debug_spew_send_string to
++       * usually force polling or bitbanging on your debug console device
++       */
++      if (oops_in_progress && global_inside_suspend &&
++          printk_emergency_debug_spew_init &&
++          printk_emergency_debug_spew_send_string) {
++              unsigned long cur_index;
++              char ch[2];
++
++              if (global_inside_suspend == 1) {
++                      (printk_emergency_debug_spew_init)();
++
++                      ch[1] = '\0';
++                      cur_index = con_start;
++                      while (cur_index != log_end) {
++                              ch[0] = LOG_BUF(cur_index);
++                              (printk_emergency_debug_spew_send_string)(ch);
++                              cur_index++;
++                      }
++                      global_inside_suspend++; /* only once */
++              }
++              (printk_emergency_debug_spew_send_string)(printk_buf);
++      }
++#endif
+       /*
+        * Copy the output into log_buf.  If the caller didn't provide
+        * appropriate log level tags, we insert them here
+@@ -891,12 +933,18 @@
+       printk("Suspending console(s) (use no_console_suspend to debug)\n");
+       acquire_console_sem();
+       console_suspended = 1;
++#ifdef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
++      up(&console_sem);
++#endif
+ }
+ void resume_console(void)
+ {
+       if (!console_suspend_enabled)
+               return;
++#ifdef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
++      down(&console_sem);
++#endif
+       console_suspended = 0;
+       release_console_sem();
+ }
+@@ -912,11 +960,17 @@
+ void acquire_console_sem(void)
+ {
+       BUG_ON(in_interrupt());
++#ifndef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
+       if (console_suspended) {
+               down(&secondary_console_sem);
+               return;
+       }
++#endif
+       down(&console_sem);
++#ifdef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
++      if (console_suspended)
++              return;
++#endif
+       console_locked = 1;
+       console_may_schedule = 1;
+ }
+@@ -926,6 +980,12 @@
+ {
+       if (down_trylock(&console_sem))
+               return -1;
++#ifdef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
++      if (console_suspended) {
++              up(&console_sem);
++              return -1;
++      }
++#endif
+       console_locked = 1;
+       console_may_schedule = 0;
+       return 0;
+@@ -979,7 +1039,11 @@
+       unsigned wake_klogd = 0;
+       if (console_suspended) {
++#ifdef CONFIG_ANDROID_CONSOLE_EARLYSUSPEND
++              up(&console_sem);
++#else
+               up(&secondary_console_sem);
++#endif
+               return;
+       }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/kernel/timer.c linux-2.6.29-rc3.owrt.om/kernel/timer.c
+--- linux-2.6.29-rc3.owrt/kernel/timer.c       2009-05-10 22:05:04.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/kernel/timer.c    2009-05-10 22:28:00.000000000 +0200
+@@ -813,7 +813,6 @@
+        * don't have to detach them individually.
+        */
+       list_for_each_entry_safe(timer, tmp, &tv_list, entry) {
+-              BUG_ON(tbase_get_base(timer->base) != base);
+               internal_add_timer(base, timer);
+       }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/lib/Kconfig.debug linux-2.6.29-rc3.owrt.om/lib/Kconfig.debug
+--- linux-2.6.29-rc3.owrt/lib/Kconfig.debug    2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/lib/Kconfig.debug 2009-05-10 22:28:00.000000000 +0200
+@@ -847,6 +847,13 @@
+         Say N if you are unsure.
++config FIND_IRQ_BLOCKERS
++        bool "IRQ Blocker statistics"
++      depends on ARM
++        ---help---
++          Enables tracking of IRQ dead-time because something has
++          disabled interrupts
++
+ config DYNAMIC_PRINTK_DEBUG
+       bool "Enable dynamic printk() call support"
+       default n
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/MAINTAINERS linux-2.6.29-rc3.owrt.om/MAINTAINERS
+--- linux-2.6.29-rc3.owrt/MAINTAINERS  2009-05-10 22:09:09.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/MAINTAINERS       2009-05-10 22:28:00.000000000 +0200
+@@ -1711,6 +1711,20 @@
+ P:    Matthew Wilcox
+ M:    matthew@wil.cx
+ L:    linux-fsdevel@vger.kernel.org
++
++FIC/OPENMOKO NEO1973 GSM PHONE
++P:    Harald Welte
++M:    laforge@openmoko.org
++L:    openmoko-kernel@lists.openmoko.org
++W:    http://wiki.openmoko.org/wiki/Kernel
++W:    http://wiki.openmoko.org/wiki/Neo1973
++S:    Maintained
++
++FRAMEBUFFER LAYER
++P:    Antonino Daplas
++M:    adaplas@gmail.com
++L:    linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++W:    http://linux-fbdev.sourceforge.net/
+ S:    Maintained
+ FILESYSTEMS (VFS and infrastructure)
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/makerecovery linux-2.6.29-rc3.owrt.om/makerecovery
+--- linux-2.6.29-rc3.owrt/makerecovery 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/makerecovery      2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,17 @@
++#!/bin/sh
++#
++# make 6MB recovery image from two moredrivers type kernels
++# placed at start and at +4MBytes
++
++if [ -z "$1" ] ; then
++ echo "Usage: $0 uImage-moredrivers-..."
++ exit 1
++fi
++cat $1 > recovery-$1
++SIZE=`ls -l $1 | tr -s ' ' ' ' | cut -d' ' -f5`
++SPACE=$(( 4 * 1024 * 1024 - $SIZE ))
++dd if=/dev/zero of=_spacer bs=1 count=$SPACE
++cat _spacer >> recovery-$1
++rm -f _spacer
++cat $1 >> recovery-$1
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/mm/ashmem.c linux-2.6.29-rc3.owrt.om/mm/ashmem.c
+--- linux-2.6.29-rc3.owrt/mm/ashmem.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/mm/ashmem.c       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,657 @@
++/* drivers/android/ashmem.c
++**
++** Android / Anonymous Shared Memory Subsystem, ashmem
++**
++** Copyright (C) 2008 Google, Inc.
++**
++** Robert Love <rlove@google.com>
++**
++** This software is licensed under the terms of the GNU General Public
++** License version 2, as published by the Free Software Foundation, and
++** may be copied, distributed, and modified under those terms.
++**
++** This program is distributed in the hope that it will be useful,
++** but WITHOUT ANY WARRANTY; without even the implied warranty of
++** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++** GNU General Public License for more details.
++*/
++
++#include <linux/module.h>
++#include <linux/file.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/security.h>
++#include <linux/mm.h>
++#include <linux/mman.h>
++#include <linux/uaccess.h>
++#include <linux/personality.h>
++#include <linux/bitops.h>
++#include <linux/mutex.h>
++#include <linux/shmem_fs.h>
++#include <linux/ashmem.h>
++
++/*
++ * ashmem_area - android shared memory area
++ * Lifecycle: From our parent file's open() until its release()
++ * Locking: Protected by `ashmem_mutex'
++ * Big Note: Mappings do NOT pin this structure; it dies on close()
++ */
++struct ashmem_area {
++      char name[ASHMEM_NAME_LEN];     /* optional name for /proc/pid/maps */
++      struct list_head unpinned_list; /* list of all ashmem areas */
++      struct file *file;              /* the shmem-based backing file */
++      size_t size;                    /* size of the mapping, in bytes */
++      unsigned long prot_mask;        /* allowed prot bits, as vm_flags */
++};
++
++/*
++ * ashmem_range - represents an interval of unpinned (evictable) pages
++ * Lifecycle: From unpin to pin
++ * Locking: Protected by `ashmem_mutex'
++ */
++struct ashmem_range {
++      struct list_head lru;           /* entry in LRU list */
++      struct list_head unpinned;      /* entry in its area's unpinned list */
++      struct ashmem_area *asma;       /* associated area */
++      size_t pgstart;                 /* starting page, inclusive */
++      size_t pgend;                   /* ending page, inclusive */
++      unsigned int purged;            /* ASHMEM_NOT or ASHMEM_WAS_PURGED */
++};
++
++/* LRU list of unpinned pages, protected by ashmem_mutex */
++static LIST_HEAD(ashmem_lru_list);
++
++/* Count of pages on our LRU list, protected by ashmem_mutex */
++static unsigned long lru_count;
++
++/*
++ * ashmem_mutex - protects the list of and each individual ashmem_area
++ *
++ * Lock Ordering: ashmex_mutex -> i_mutex -> i_alloc_sem
++ */
++static DEFINE_MUTEX(ashmem_mutex);
++
++static struct kmem_cache *ashmem_area_cachep __read_mostly;
++static struct kmem_cache *ashmem_range_cachep __read_mostly;
++
++#define range_size(range) \
++  ((range)->pgend - (range)->pgstart + 1)
++
++#define range_on_lru(range) \
++  ((range)->purged == ASHMEM_NOT_PURGED)
++
++#define page_range_subsumes_range(range, start, end) \
++  (((range)->pgstart >= (start)) && ((range)->pgend <= (end)))
++
++#define page_range_subsumed_by_range(range, start, end) \
++  (((range)->pgstart <= (start)) && ((range)->pgend >= (end)))
++
++#define page_in_range(range, page) \
++ (((range)->pgstart <= (page)) && ((range)->pgend >= (page)))
++
++#define page_range_in_range(range, start, end) \
++  (page_in_range(range, start) || page_in_range(range, end) || \
++   page_range_subsumes_range(range, start, end))
++
++#define range_before_page(range, page) \
++  ((range)->pgend < (page))
++
++#define PROT_MASK             (PROT_EXEC | PROT_READ | PROT_WRITE)
++
++static inline void lru_add(struct ashmem_range *range)
++{
++      list_add_tail(&range->lru, &ashmem_lru_list);
++      lru_count += range_size(range);
++}
++
++static inline void lru_del(struct ashmem_range *range)
++{
++      list_del(&range->lru);
++      lru_count -= range_size(range);
++}
++
++/*
++ * range_alloc - allocate and initialize a new ashmem_range structure
++ *
++ * 'asma' - associated ashmem_area
++ * 'prev_range' - the previous ashmem_range in the sorted asma->unpinned list
++ * 'purged' - initial purge value (ASMEM_NOT_PURGED or ASHMEM_WAS_PURGED)
++ * 'start' - starting page, inclusive
++ * 'end' - ending page, inclusive
++ *
++ * Caller must hold ashmem_mutex.
++ */
++static int range_alloc(struct ashmem_area *asma,
++                     struct ashmem_range *prev_range, unsigned int purged,
++                     size_t start, size_t end)
++{
++      struct ashmem_range *range;
++
++      range = kmem_cache_zalloc(ashmem_range_cachep, GFP_KERNEL);
++      if (unlikely(!range))
++              return -ENOMEM;
++
++      range->asma = asma;
++      range->pgstart = start;
++      range->pgend = end;
++      range->purged = purged;
++
++      list_add_tail(&range->unpinned, &prev_range->unpinned);
++
++      if (range_on_lru(range))
++              lru_add(range);
++
++      return 0;
++}
++
++static void range_del(struct ashmem_range *range)
++{
++      list_del(&range->unpinned);
++      if (range_on_lru(range))
++              lru_del(range);
++      kmem_cache_free(ashmem_range_cachep, range);
++}
++
++/*
++ * range_shrink - shrinks a range
++ *
++ * Caller must hold ashmem_mutex.
++ */
++static inline void range_shrink(struct ashmem_range *range,
++                              size_t start, size_t end)
++{
++      size_t pre = range_size(range);
++
++      range->pgstart = start;
++      range->pgend = end;
++
++      if (range_on_lru(range))
++              lru_count -= pre - range_size(range);
++}
++
++static int ashmem_open(struct inode *inode, struct file *file)
++{
++      struct ashmem_area *asma;
++      int ret;
++
++      ret = nonseekable_open(inode, file);
++      if (unlikely(ret))
++              return ret;
++
++      asma = kmem_cache_zalloc(ashmem_area_cachep, GFP_KERNEL);
++      if (unlikely(!asma))
++              return -ENOMEM;
++
++      INIT_LIST_HEAD(&asma->unpinned_list);
++      asma->prot_mask = PROT_MASK;
++      file->private_data = asma;
++
++      return 0;
++}
++
++static int ashmem_release(struct inode *ignored, struct file *file)
++{
++      struct ashmem_area *asma = file->private_data;
++      struct ashmem_range *range, *next;
++
++      mutex_lock(&ashmem_mutex);
++      list_for_each_entry_safe(range, next, &asma->unpinned_list, unpinned)
++              range_del(range);
++      mutex_unlock(&ashmem_mutex);
++
++      if (asma->file)
++              fput(asma->file);
++      kmem_cache_free(ashmem_area_cachep, asma);
++
++      return 0;
++}
++
++static int ashmem_mmap(struct file *file, struct vm_area_struct *vma)
++{
++      struct ashmem_area *asma = file->private_data;
++      int ret = 0;
++
++      mutex_lock(&ashmem_mutex);
++
++      /* user needs to SET_SIZE before mapping */
++      if (unlikely(!asma->size)) {
++              ret = -EINVAL;
++              goto out;
++      }
++
++      /* requested protection bits must match our allowed protection mask */
++      if (unlikely((vma->vm_flags & ~asma->prot_mask) & PROT_MASK)) {
++              ret = -EPERM;
++              goto out;
++      }
++
++      if (!asma->file) {
++              char *name = ASHMEM_NAME_DEF;
++              struct file *vmfile;
++
++              if (asma->name[0] != '\0')
++                      name = asma->name;
++
++              /* ... and allocate the backing shmem file */
++              vmfile = shmem_file_setup(name, asma->size, vma->vm_flags);
++              if (unlikely(IS_ERR(vmfile))) {
++                      ret = PTR_ERR(vmfile);
++                      goto out;
++              }
++              asma->file = vmfile;
++      }
++      get_file(asma->file);
++
++      shmem_set_file(vma, asma->file);
++      vma->vm_flags |= VM_CAN_NONLINEAR;
++
++out:
++      mutex_unlock(&ashmem_mutex);
++      return ret;
++}
++
++/*
++ * ashmem_shrink - our cache shrinker, called from mm/vmscan.c :: shrink_slab
++ *
++ * 'nr_to_scan' is the number of objects (pages) to prune, or 0 to query how
++ * many objects (pages) we have in total.
++ *
++ * 'gfp_mask' is the mask of the allocation that got us into this mess.
++ *
++ * Return value is the number of objects (pages) remaining, or -1 if we cannot
++ * proceed without risk of deadlock (due to gfp_mask).
++ *
++ * We approximate LRU via least-recently-unpinned, jettisoning unpinned partial
++ * chunks of ashmem regions LRU-wise one-at-a-time until we hit 'nr_to_scan'
++ * pages freed.
++ */
++static int ashmem_shrink(int nr_to_scan, gfp_t gfp_mask)
++{
++      struct ashmem_range *range, *next;
++
++      /* We might recurse into filesystem code, so bail out if necessary */
++      if (nr_to_scan && !(gfp_mask & __GFP_FS))
++              return -1;
++      if (!nr_to_scan)
++              return lru_count;
++
++      mutex_lock(&ashmem_mutex);
++      list_for_each_entry_safe(range, next, &ashmem_lru_list, lru) {
++              struct inode *inode = range->asma->file->f_dentry->d_inode;
++              loff_t start = range->pgstart * PAGE_SIZE;
++              loff_t end = (range->pgend + 1) * PAGE_SIZE - 1;
++
++              vmtruncate_range(inode, start, end);
++              range->purged = ASHMEM_WAS_PURGED;
++              lru_del(range);
++
++              nr_to_scan -= range_size(range);
++              if (nr_to_scan <= 0)
++                      break;
++      }
++      mutex_unlock(&ashmem_mutex);
++
++      return lru_count;
++}
++
++static struct shrinker ashmem_shrinker = {
++      .shrink = ashmem_shrink,
++      .seeks = DEFAULT_SEEKS * 4,
++};
++
++static int set_prot_mask(struct ashmem_area *asma, unsigned long prot)
++{
++      int ret = 0;
++
++      mutex_lock(&ashmem_mutex);
++
++      /* the user can only remove, not add, protection bits */
++      if (unlikely((asma->prot_mask & prot) != prot)) {
++              ret = -EINVAL;
++              goto out;
++      }
++
++      /* does the application expect PROT_READ to imply PROT_EXEC? */
++      if ((prot & PROT_READ) && (current->personality & READ_IMPLIES_EXEC))
++              prot |= PROT_EXEC;
++
++      asma->prot_mask = prot;
++
++out:
++      mutex_unlock(&ashmem_mutex);
++      return ret;
++}
++
++static int set_name(struct ashmem_area *asma, void __user *name)
++{
++      int ret = 0;
++
++      mutex_lock(&ashmem_mutex);
++
++      /* cannot change an existing mapping's name */
++      if (unlikely(asma->file)) {
++              ret = -EINVAL;
++              goto out;
++      }
++
++      if (unlikely(copy_from_user(asma->name, name, ASHMEM_NAME_LEN)))
++              ret = -EFAULT;
++      asma->name[ASHMEM_NAME_LEN-1] = '\0';
++
++out:
++      mutex_unlock(&ashmem_mutex);
++
++      return ret;
++}
++
++static int get_name(struct ashmem_area *asma, void __user *name)
++{
++      int ret = 0;
++
++      mutex_lock(&ashmem_mutex);
++      if (asma->name[0] != '\0') {
++              size_t len;
++
++              /*
++               * Copying only `len', instead of ASHMEM_NAME_LEN, bytes
++               * prevents us from revealing one user's stack to another.
++               */
++              len = strlen(asma->name) + 1;
++              if (unlikely(copy_to_user(name, asma->name, len)))
++                      ret = -EFAULT;
++      } else {
++              if (unlikely(copy_to_user(name, ASHMEM_NAME_DEF,
++                                        sizeof(ASHMEM_NAME_DEF))))
++                      ret = -EFAULT;
++      }
++      mutex_unlock(&ashmem_mutex);
++
++      return ret;
++}
++
++/*
++ * ashmem_pin - pin the given ashmem region, returning whether it was
++ * previously purged (ASHMEM_WAS_PURGED) or not (ASHMEM_NOT_PURGED).
++ *
++ * Caller must hold ashmem_mutex.
++ */
++static int ashmem_pin(struct ashmem_area *asma, size_t pgstart, size_t pgend)
++{
++      struct ashmem_range *range, *next;
++      int ret = ASHMEM_NOT_PURGED;
++
++      list_for_each_entry_safe(range, next, &asma->unpinned_list, unpinned) {
++              /* moved past last applicable page; we can short circuit */
++              if (range_before_page(range, pgstart))
++                      break;
++
++              /*
++               * The user can ask us to pin pages that span multiple ranges,
++               * or to pin pages that aren't even unpinned, so this is messy.
++               *
++               * Four cases:
++               * 1. The requested range subsumes an existing range, so we
++               *    just remove the entire matching range.
++               * 2. The requested range overlaps the start of an existing
++               *    range, so we just update that range.
++               * 3. The requested range overlaps the end of an existing
++               *    range, so we just update that range.
++               * 4. The requested range punches a hole in an existing range,
++               *    so we have to update one side of the range and then
++               *    create a new range for the other side.
++               */
++              if (page_range_in_range(range, pgstart, pgend)) {
++                      ret |= range->purged;
++
++                      /* Case #1: Easy. Just nuke the whole thing. */
++                      if (page_range_subsumes_range(range, pgstart, pgend)) {
++                              range_del(range);
++                              continue;
++                      }
++
++                      /* Case #2: We overlap from the start, so adjust it */
++                      if (range->pgstart >= pgstart) {
++                              range_shrink(range, pgend + 1, range->pgend);
++                              continue;
++                      }
++
++                      /* Case #3: We overlap from the rear, so adjust it */
++                      if (range->pgend <= pgend) {
++                              range_shrink(range, range->pgstart, pgstart-1);
++                              continue;
++                      }
++
++                      /*
++                       * Case #4: We eat a chunk out of the middle. A bit
++                       * more complicated, we allocate a new range for the
++                       * second half and adjust the first chunk's endpoint.
++                       */
++                      range_alloc(asma, range, range->purged,
++                                  pgend + 1, range->pgend);
++                      range_shrink(range, range->pgstart, pgstart - 1);
++                      break;
++              }
++      }
++
++      return ret;
++}
++
++/*
++ * ashmem_unpin - unpin the given range of pages. Returns zero on success.
++ *
++ * Caller must hold ashmem_mutex.
++ */
++static int ashmem_unpin(struct ashmem_area *asma, size_t pgstart, size_t pgend)
++{
++      struct ashmem_range *range, *next;
++      unsigned int purged = ASHMEM_NOT_PURGED;
++
++restart:
++      list_for_each_entry_safe(range, next, &asma->unpinned_list, unpinned) {
++              /* short circuit: this is our insertion point */
++              if (range_before_page(range, pgstart))
++                      break;
++
++              /*
++               * The user can ask us to unpin pages that are already entirely
++               * or partially pinned. We handle those two cases here.
++               */
++              if (page_range_subsumed_by_range(range, pgstart, pgend))
++                      return 0;
++              if (page_range_in_range(range, pgstart, pgend)) {
++                      pgstart = min_t(size_t, range->pgstart, pgstart),
++                      pgend = max_t(size_t, range->pgend, pgend);
++                      purged |= range->purged;
++                      range_del(range);
++                      goto restart;
++              }
++      }
++
++      return range_alloc(asma, range, purged, pgstart, pgend);
++}
++
++/*
++ * ashmem_get_pin_status - Returns ASHMEM_IS_UNPINNED if _any_ pages in the
++ * given interval are unpinned and ASHMEM_IS_PINNED otherwise.
++ *
++ * Caller must hold ashmem_mutex.
++ */
++static int ashmem_get_pin_status(struct ashmem_area *asma, size_t pgstart,
++                               size_t pgend)
++{
++      struct ashmem_range *range;
++      int ret = ASHMEM_IS_PINNED;
++
++      list_for_each_entry(range, &asma->unpinned_list, unpinned) {
++              if (range_before_page(range, pgstart))
++                      break;
++              if (page_range_in_range(range, pgstart, pgend)) {
++                      ret = ASHMEM_IS_UNPINNED;
++                      break;
++              }
++      }
++
++      return ret;
++}
++
++static int ashmem_pin_unpin(struct ashmem_area *asma, unsigned long cmd,
++                          void __user *p)
++{
++      struct ashmem_pin pin;
++      size_t pgstart, pgend;
++      int ret = -EINVAL;
++
++      if (unlikely(!asma->file))
++              return -EINVAL;
++
++      if (unlikely(copy_from_user(&pin, p, sizeof(pin))))
++              return -EFAULT;
++
++      /* per custom, you can pass zero for len to mean "everything onward" */
++      if (!pin.len)
++              pin.len = asma->size - pin.offset;
++
++      if (unlikely((pin.offset | pin.len) & ~PAGE_MASK))
++              return -EINVAL;
++
++      if (unlikely(((__u32) -1) - pin.offset < pin.len))
++              return -EINVAL;
++
++      if (unlikely(asma->size < pin.offset + pin.len))
++              return -EINVAL;
++
++      pgstart = pin.offset / PAGE_SIZE;
++      pgend = pgstart + (pin.len / PAGE_SIZE) - 1;
++
++      mutex_lock(&ashmem_mutex);
++
++      switch (cmd) {
++      case ASHMEM_PIN:
++              ret = ashmem_pin(asma, pgstart, pgend);
++              break;
++      case ASHMEM_UNPIN:
++              ret = ashmem_unpin(asma, pgstart, pgend);
++              break;
++      case ASHMEM_GET_PIN_STATUS:
++              ret = ashmem_get_pin_status(asma, pgstart, pgend);
++              break;
++      }
++
++      mutex_unlock(&ashmem_mutex);
++
++      return ret;
++}
++
++static long ashmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++      struct ashmem_area *asma = file->private_data;
++      long ret = -ENOTTY;
++
++      switch (cmd) {
++      case ASHMEM_SET_NAME:
++              ret = set_name(asma, (void __user *) arg);
++              break;
++      case ASHMEM_GET_NAME:
++              ret = get_name(asma, (void __user *) arg);
++              break;
++      case ASHMEM_SET_SIZE:
++              ret = -EINVAL;
++              if (!asma->file && !(arg & ~PAGE_MASK)) {
++                      ret = 0;
++                      asma->size = (size_t) arg;
++              }
++              break;
++      case ASHMEM_GET_SIZE:
++              ret = asma->size;
++              break;
++      case ASHMEM_SET_PROT_MASK:
++              ret = set_prot_mask(asma, arg);
++              break;
++      case ASHMEM_GET_PROT_MASK:
++              ret = asma->prot_mask;
++              break;
++      case ASHMEM_PIN:
++      case ASHMEM_UNPIN:
++      case ASHMEM_GET_PIN_STATUS:
++              ret = ashmem_pin_unpin(asma, cmd, (void __user *) arg);
++              break;
++      case ASHMEM_PURGE_ALL_CACHES:
++              ret = -EPERM;
++              if (capable(CAP_SYS_ADMIN)) {
++                      ret = ashmem_shrink(0, GFP_KERNEL);
++                      ashmem_shrink(ret, GFP_KERNEL);
++              }
++              break;
++      }
++
++      return ret;
++}
++
++static struct file_operations ashmem_fops = {
++      .owner = THIS_MODULE,
++      .open = ashmem_open,
++      .release = ashmem_release,
++      .mmap = ashmem_mmap,
++      .unlocked_ioctl = ashmem_ioctl,
++      .compat_ioctl = ashmem_ioctl,
++};
++
++static struct miscdevice ashmem_misc = {
++      .minor = MISC_DYNAMIC_MINOR,
++      .name = "ashmem",
++      .fops = &ashmem_fops,
++};
++
++static int __init ashmem_init(void)
++{
++      int ret;
++
++      ashmem_area_cachep = kmem_cache_create("ashmem_area_cache",
++                                        sizeof(struct ashmem_area),
++                                        0, 0, NULL);
++      if (unlikely(!ashmem_area_cachep)) {
++              printk(KERN_ERR "ashmem: failed to create slab cache\n");
++              return -ENOMEM;
++      }
++
++      ashmem_range_cachep = kmem_cache_create("ashmem_range_cache",
++                                        sizeof(struct ashmem_range),
++                                        0, 0, NULL);
++      if (unlikely(!ashmem_range_cachep)) {
++              printk(KERN_ERR "ashmem: failed to create slab cache\n");
++              return -ENOMEM;
++      }
++
++      ret = misc_register(&ashmem_misc);
++      if (unlikely(ret)) {
++              printk(KERN_ERR "ashmem: failed to register misc device!\n");
++              return ret;
++      }
++
++      register_shrinker(&ashmem_shrinker);
++
++      printk(KERN_INFO "ashmem: initialized\n");
++
++      return 0;
++}
++
++static void __exit ashmem_exit(void)
++{
++      int ret;
++
++      unregister_shrinker(&ashmem_shrinker);
++
++      ret = misc_deregister(&ashmem_misc);
++      if (unlikely(ret))
++              printk(KERN_ERR "ashmem: failed to unregister misc device!\n");
++
++      kmem_cache_destroy(ashmem_range_cachep);
++      kmem_cache_destroy(ashmem_area_cachep);
++
++      printk(KERN_INFO "ashmem: unloaded\n");
++}
++
++module_init(ashmem_init);
++module_exit(ashmem_exit);
++
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/mm/Makefile linux-2.6.29-rc3.owrt.om/mm/Makefile
+--- linux-2.6.29-rc3.owrt/mm/Makefile  2009-05-10 22:04:53.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/mm/Makefile       2009-05-10 22:28:00.000000000 +0200
+@@ -21,6 +21,8 @@
+ obj-$(CONFIG_NUMA)    += mempolicy.o
+ obj-$(CONFIG_SPARSEMEM)       += sparse.o
+ obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
++obj-$(CONFIG_SHMEM) += shmem.o
++obj-$(CONFIG_ASHMEM) += ashmem.o
+ obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
+ obj-$(CONFIG_SLOB) += slob.o
+ obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/mm/tiny-shmem.c linux-2.6.29-rc3.owrt.om/mm/tiny-shmem.c
+--- linux-2.6.29-rc3.owrt/mm/tiny-shmem.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/mm/tiny-shmem.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,148 @@
++/*
++ * tiny-shmem.c: simple shmemfs and tmpfs using ramfs code
++ *
++ * Matt Mackall <mpm@selenic.com> January, 2004
++ * derived from mm/shmem.c and fs/ramfs/inode.c
++ *
++ * This is intended for small system where the benefits of the full
++ * shmem code (swap-backed and resource-limited) are outweighed by
++ * their complexity. On systems without swap this code should be
++ * effectively equivalent, but much lighter weight.
++ */
++
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/vfs.h>
++#include <linux/mount.h>
++#include <linux/file.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/swap.h>
++#include <linux/ramfs.h>
++
++static struct file_system_type tmpfs_fs_type = {
++      .name           = "tmpfs",
++      .get_sb         = ramfs_get_sb,
++      .kill_sb        = kill_litter_super,
++};
++
++static struct vfsmount *shm_mnt;
++
++static int __init init_tmpfs(void)
++{
++      BUG_ON(register_filesystem(&tmpfs_fs_type) != 0);
++
++      shm_mnt = kern_mount(&tmpfs_fs_type);
++      BUG_ON(IS_ERR(shm_mnt));
++
++      return 0;
++}
++module_init(init_tmpfs)
++
++/**
++ * shmem_file_setup - get an unlinked file living in tmpfs
++ * @name: name for dentry (to be seen in /proc/<pid>/maps
++ * @size: size to be set for the file
++ * @flags: vm_flags
++ */
++struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
++{
++      int error;
++      struct file *file;
++      struct inode *inode;
++      struct dentry *dentry, *root;
++      struct qstr this;
++
++      if (IS_ERR(shm_mnt))
++              return (void *)shm_mnt;
++
++      error = -ENOMEM;
++      this.name = name;
++      this.len = strlen(name);
++      this.hash = 0; /* will go */
++      root = shm_mnt->mnt_root;
++      dentry = d_alloc(root, &this);
++      if (!dentry)
++              goto put_memory;
++
++      error = -ENFILE;
++      file = get_empty_filp();
++      if (!file)
++              goto put_dentry;
++
++      error = -ENOSPC;
++      inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
++      if (!inode)
++              goto close_file;
++
++      d_instantiate(dentry, inode);
++      inode->i_size = size;
++      inode->i_nlink = 0;     /* It is unlinked */
++      init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
++                      &ramfs_file_operations);
++
++#ifndef CONFIG_MMU
++      error = ramfs_nommu_expand_for_mapping(inode, size);
++      if (error)
++              goto close_file;
++#endif
++      return file;
++
++close_file:
++      put_filp(file);
++put_dentry:
++      dput(dentry);
++put_memory:
++      return ERR_PTR(error);
++}
++EXPORT_SYMBOL_GPL(shmem_file_setup);
++
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++      if (vma->vm_file)
++              fput(vma->vm_file);
++      vma->vm_file = file;
++      vma->vm_ops = &generic_file_vm_ops;
++}
++
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++      if (vma->vm_file)
++              fput(vma->vm_file);
++      vma->vm_file = file;
++      vma->vm_ops = &generic_file_vm_ops;
++}
++
++/**
++ * shmem_zero_setup - setup a shared anonymous mapping
++ * @vma: the vma to be mmapped is prepared by do_mmap_pgoff
++ */
++int shmem_zero_setup(struct vm_area_struct *vma)
++{
++      struct file *file;
++      loff_t size = vma->vm_end - vma->vm_start;
++
++      file = shmem_file_setup("dev/zero", size, vma->vm_flags);
++      if (IS_ERR(file))
++              return PTR_ERR(file);
++
++      shmem_set_file(vma, file);
++
++      return 0;
++}
++
++int shmem_unuse(swp_entry_t entry, struct page *page)
++{
++      return 0;
++}
++
++#ifndef CONFIG_MMU
++unsigned long shmem_get_unmapped_area(struct file *file,
++                                    unsigned long addr,
++                                    unsigned long len,
++                                    unsigned long pgoff,
++                                    unsigned long flags)
++{
++      return ramfs_nommu_get_unmapped_area(file, addr, len, pgoff, flags);
++}
++#endif
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/remote_install_sdcard linux-2.6.29-rc3.owrt.om/remote_install_sdcard
+--- linux-2.6.29-rc3.owrt/remote_install_sdcard        1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/remote_install_sdcard     2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,18 @@
++#!/bin/sh
++
++# automatic kernel updater and reboot - Andy Green <andy@openmoko.com>
++
++GTA_DEVICE_IP=192.168.0.202
++
++# you should set up key-based auth on dropbear if you want
++# to play this game.
++#
++# 1) mkdir /home/root/.ssh
++# 2) chown root:root / /home /home/root
++# 3) chmod 700 /home/root /home/root/.ssh
++# 4) copy your id_*.pub into /home/root/.ssh/authorized_keys
++# 5) chmod 600 /home/root/.ssh/*
++
++scp uImage.bin root@$GTA_DEVICE_IP:/boot
++ssh root@$GTA_DEVICE_IP "mount /dev/mmcblk0p1 / -oremount,ro ; reboot -if &"
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/scripts/mkuboot.sh linux-2.6.29-rc3.owrt.om/scripts/mkuboot.sh
+--- linux-2.6.29-rc3.owrt/scripts/mkuboot.sh   2009-05-10 22:04:48.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/scripts/mkuboot.sh        2009-05-10 22:28:00.000000000 +0200
+@@ -11,7 +11,7 @@
+       if [ -z "${MKIMAGE}" ]; then
+               # Doesn't exist
+               echo '"mkimage" command not found - U-Boot images will not be built' >&2
+-              exit 0;
++              exit 1;
+       fi
+ fi
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8731.c linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8731.c
+--- linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8731.c    2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8731.c 2009-05-10 22:28:00.000000000 +0200
+@@ -73,6 +73,8 @@
+       u16 *cache = codec->reg_cache;
+       if (reg >= WM8731_CACHEREGNUM)
+               return;
++
++      printk(KERN_INFO "%s: reg %d, val %04x\n", __func__, reg, value);
+       cache[reg] = value;
+ }
+@@ -84,6 +86,8 @@
+ {
+       u8 data[2];
++      printk(KERN_INFO "%s: reg %d val %04x\n", __func__, reg, value);
++
+       /* data is
+        *   D15..D9 WM8731 register offset
+        *   D8...D0 register data
+@@ -521,7 +525,11 @@
+       if (codec->reg_cache == NULL)
+               return -ENOMEM;
+-      wm8731_reset(codec);
++      ret = wm8731_reset(codec);
++      if (ret < 0) {
++              printk(KERN_ERR "wm8731: failed to send reset\n");
++              return -EIO;
++      }
+       /* register pcms */
+       ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.c linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8753.c
+--- linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.c    2009-05-10 22:09:10.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8753.c 2009-05-10 22:28:00.000000000 +0200
+@@ -51,8 +51,6 @@
+ #include "wm8753.h"
+-#define WM8753_VERSION "0.16"
+-
+ static int caps_charge = 2000;
+ module_param(caps_charge, int, 0);
+ MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)");
+@@ -60,12 +58,6 @@
+ static void wm8753_set_dai_mode(struct snd_soc_codec *codec,
+       unsigned int mode);
+-/* codec private data */
+-struct wm8753_priv {
+-      unsigned int sysclk;
+-      unsigned int pcmclk;
+-};
+-
+ /*
+  * wm8753 register cache
+  * We can't read the WM8753 register space when we
+@@ -90,6 +82,14 @@
+       0x0000, 0x0000
+ };
++/* codec private data */
++struct wm8753_priv {
++      unsigned int sysclk;
++      unsigned int pcmclk;
++      struct snd_soc_codec codec;
++      u16 reg_cache[ARRAY_SIZE(wm8753_reg)];
++};
++
+ /*
+  * read wm8753 register cache
+  */
+@@ -1451,7 +1451,15 @@
+ },
+ };
+-struct snd_soc_dai wm8753_dai[2];
++struct snd_soc_dai wm8753_dai[2] = {
++      {
++              .name = "dummy1"
++      },
++      {
++              .name = "dummy2"
++      },
++};
++
+ EXPORT_SYMBOL_GPL(wm8753_dai);
+ static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode)
+@@ -1459,30 +1467,35 @@
+       if (mode < 4) {
+               int playback_active, capture_active, codec_active, pop_wait;
+               void *private_data;
++              struct list_head list;
+               playback_active = wm8753_dai[0].playback.active;
+               capture_active = wm8753_dai[0].capture.active;
+               codec_active = wm8753_dai[0].active;
+               private_data = wm8753_dai[0].private_data;
+               pop_wait = wm8753_dai[0].pop_wait;
++              list = wm8753_dai[0].list;
+               wm8753_dai[0] = wm8753_all_dai[mode << 1];
+               wm8753_dai[0].playback.active = playback_active;
+               wm8753_dai[0].capture.active = capture_active;
+               wm8753_dai[0].active = codec_active;
+               wm8753_dai[0].private_data = private_data;
+               wm8753_dai[0].pop_wait = pop_wait;
++              wm8753_dai[0].list = list;
+               playback_active = wm8753_dai[1].playback.active;
+               capture_active = wm8753_dai[1].capture.active;
+               codec_active = wm8753_dai[1].active;
+               private_data = wm8753_dai[1].private_data;
+               pop_wait = wm8753_dai[1].pop_wait;
++              list = wm8753_dai[1].list;
+               wm8753_dai[1] = wm8753_all_dai[(mode << 1) + 1];
+               wm8753_dai[1].playback.active = playback_active;
+               wm8753_dai[1].capture.active = capture_active;
+               wm8753_dai[1].active = codec_active;
+               wm8753_dai[1].private_data = private_data;
+               wm8753_dai[1].pop_wait = pop_wait;
++              wm8753_dai[1].list = list;
+       }
+       wm8753_dai[0].codec = codec;
+       wm8753_dai[1].codec = codec;
+@@ -1524,6 +1537,11 @@
+       for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
+               if (i + 1 == WM8753_RESET)
+                       continue;
++
++              /* No point in writing hardware default values back */
++              if (cache[i] == wm8753_reg[i])
++                      continue;
++
+               data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
+               data[1] = cache[i] & 0x00ff;
+               codec->hw_write(codec->control_data, data, 2);
+@@ -1542,44 +1560,133 @@
+       return 0;
+ }
++static struct snd_soc_codec *wm8753_codec;
++
++static int wm8753_probe(struct platform_device *pdev)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++      struct snd_soc_codec *codec;
++      int ret = 0;
++
++      if (!wm8753_codec) {
++              dev_err(&pdev->dev, "WM8753 codec not yet registered\n");
++              return -EINVAL;
++      }
++
++      socdev->codec = wm8753_codec;
++      codec = wm8753_codec;
++
++      wm8753_set_dai_mode(codec, 0);
++
++      /* register pcms */
++      ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
++      if (ret < 0) {
++              printk(KERN_ERR "wm8753: failed to create pcms\n");
++              goto pcm_err;
++      }
++
++      wm8753_add_controls(codec);
++      wm8753_add_widgets(codec);
++      ret = snd_soc_init_card(socdev);
++      if (ret < 0) {
++              printk(KERN_ERR "wm8753: failed to register card\n");
++              goto card_err;
++      }
++
++      return 0;
++
++card_err:
++      snd_soc_free_pcms(socdev);
++      snd_soc_dapm_free(socdev);
++
++pcm_err:
++      return ret;
++}
++
+ /*
+- * initialise the WM8753 driver
+- * register the mixer and dsp interfaces with the kernel
++ * This function forces any delayed work to be queued and run.
+  */
+-static int wm8753_init(struct snd_soc_device *socdev)
++static int run_delayed_work(struct delayed_work *dwork)
+ {
+-      struct snd_soc_codec *codec = socdev->codec;
+-      int reg, ret = 0;
++      int ret;
++
++      /* cancel any work waiting to be queued. */
++      ret = cancel_delayed_work(dwork);
++
++      /* if there was any work waiting then we run it now and
++       * wait for it's completion */
++      if (ret) {
++              schedule_delayed_work(dwork, 0);
++              flush_scheduled_work();
++      }
++      return ret;
++}
++
++/* power down chip */
++static int wm8753_remove(struct platform_device *pdev)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++
++      snd_soc_free_pcms(socdev);
++      snd_soc_dapm_free(socdev);
++
++      return 0;
++}
++
++struct snd_soc_codec_device soc_codec_dev_wm8753 = {
++      .probe =        wm8753_probe,
++      .remove =       wm8753_remove,
++      .suspend =      wm8753_suspend,
++      .resume =       wm8753_resume,
++};
++EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753);
++
++static int wm8753_register(struct wm8753_priv *wm8753)
++{
++      int ret, i;
++      struct snd_soc_codec *codec = &wm8753->codec;
++      u16 reg;
++
++      if (wm8753_codec) {
++              dev_err(codec->dev, "Multiple WM8753 devices not supported\n");
++              ret = -EINVAL;
++              goto err;
++      }
++
++      mutex_init(&codec->mutex);
++      INIT_LIST_HEAD(&codec->dapm_widgets);
++      INIT_LIST_HEAD(&codec->dapm_paths);
+       codec->name = "WM8753";
+       codec->owner = THIS_MODULE;
+       codec->read = wm8753_read_reg_cache;
+       codec->write = wm8753_write;
++      codec->bias_level = SND_SOC_BIAS_STANDBY;
+       codec->set_bias_level = wm8753_set_bias_level;
+       codec->dai = wm8753_dai;
+       codec->num_dai = 2;
+-      codec->reg_cache_size = ARRAY_SIZE(wm8753_reg);
+-      codec->reg_cache = kmemdup(wm8753_reg, sizeof(wm8753_reg), GFP_KERNEL);
+-
+-      if (codec->reg_cache == NULL)
+-              return -ENOMEM;
+-
+-      wm8753_set_dai_mode(codec, 0);
++      codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache);
++      codec->reg_cache = &wm8753->reg_cache;
++      codec->private_data = wm8753;
+-      wm8753_reset(codec);
++      memcpy(codec->reg_cache, wm8753_reg, sizeof(codec->reg_cache));
++      INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
+-      /* register pcms */
+-      ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
++      ret = wm8753_reset(codec);
+       if (ret < 0) {
+-              printk(KERN_ERR "wm8753: failed to create pcms\n");
+-              goto pcm_err;
++              dev_err(codec->dev, "Failed to issue reset\n");
++              goto err;
+       }
+       /* charge output caps */
+       wm8753_set_bias_level(codec, SND_SOC_BIAS_PREPARE);
+-      codec->bias_level = SND_SOC_BIAS_STANDBY;
+       schedule_delayed_work(&codec->delayed_work,
+-              msecs_to_jiffies(caps_charge));
++                            msecs_to_jiffies(caps_charge));
++
++      /* OpenMoko specific bodge for
++       * http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1172
++       */
++      wm8753_write(codec, WM8753_ADCTL2, 0x0000);
+       /* set the update bits */
+       reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
+@@ -1603,58 +1710,69 @@
+       reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
+       wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
+-      wm8753_add_controls(codec);
+-      wm8753_add_widgets(codec);
+-      ret = snd_soc_init_card(socdev);
+-      if (ret < 0) {
+-              printk(KERN_ERR "wm8753: failed to register card\n");
+-              goto card_err;
++      wm8753_codec = codec;
++
++      for (i = 0; i < ARRAY_SIZE(wm8753_dai); i++)
++              wm8753_dai[i].dev = codec->dev;
++
++      ret = snd_soc_register_codec(codec);
++      if (ret != 0) {
++              dev_err(codec->dev, "Failed to register codec: %d\n", ret);
++              goto err;
+       }
+-      return ret;
++      ret = snd_soc_register_dais(&wm8753_dai[0], ARRAY_SIZE(wm8753_dai));
++      if (ret != 0) {
++              dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
++              goto err_codec;
++      }
+-card_err:
+-      snd_soc_free_pcms(socdev);
+-      snd_soc_dapm_free(socdev);
+-pcm_err:
+-      kfree(codec->reg_cache);
++      return 0;
++
++err_codec:
++      run_delayed_work(&codec->delayed_work);
++      snd_soc_unregister_codec(codec);
++err:
++      kfree(wm8753);
+       return ret;
+ }
+-/* If the i2c layer weren't so broken, we could pass this kind of data
+-   around */
+-static struct snd_soc_device *wm8753_socdev;
++static void wm8753_unregister(struct wm8753_priv *wm8753)
++{
++      wm8753_set_bias_level(&wm8753->codec, SND_SOC_BIAS_OFF);
++      run_delayed_work(&wm8753->codec.delayed_work);
++      snd_soc_unregister_dais(&wm8753_dai[0], ARRAY_SIZE(wm8753_dai));
++      snd_soc_unregister_codec(&wm8753->codec);
++      kfree(wm8753);
++      wm8753_codec = NULL;
++}
+ #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+-/*
+- * WM8753 2 wire address is determined by GPIO5
+- * state during powerup.
+- *    low  = 0x1a
+- *    high = 0x1b
+- */
+-
+ static int wm8753_i2c_probe(struct i2c_client *i2c,
+                           const struct i2c_device_id *id)
+ {
+-      struct snd_soc_device *socdev = wm8753_socdev;
+-      struct snd_soc_codec *codec = socdev->codec;
+-      int ret;
++      struct snd_soc_codec *codec;
++      struct wm8753_priv *wm8753;
+-      i2c_set_clientdata(i2c, codec);
++      wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL);
++      if (wm8753 == NULL)
++              return -ENOMEM;
++
++      codec = &wm8753->codec;
++      codec->hw_write = (hw_write_t)i2c_master_send;
+       codec->control_data = i2c;
++      i2c_set_clientdata(i2c, wm8753);
+-      ret = wm8753_init(socdev);
+-      if (ret < 0)
+-              pr_err("failed to initialise WM8753\n");
++      codec->dev = &i2c->dev;
+-      return ret;
++      return wm8753_register(wm8753);
+ }
+ static int wm8753_i2c_remove(struct i2c_client *client)
+ {
+-      struct snd_soc_codec *codec = i2c_get_clientdata(client);
+-      kfree(codec->reg_cache);
++      struct wm8753_priv *wm8753 = i2c_get_clientdata(client);
++      wm8753_unregister(wm8753);
+       return 0;
+ }
+@@ -1666,86 +1784,16 @@
+ static struct i2c_driver wm8753_i2c_driver = {
+       .driver = {
+-              .name = "WM8753 I2C Codec",
++              .name = "wm8753",
+               .owner = THIS_MODULE,
+       },
+       .probe =    wm8753_i2c_probe,
+       .remove =   wm8753_i2c_remove,
+       .id_table = wm8753_i2c_id,
+ };
+-
+-static int wm8753_add_i2c_device(struct platform_device *pdev,
+-                               const struct wm8753_setup_data *setup)
+-{
+-      struct i2c_board_info info;
+-      struct i2c_adapter *adapter;
+-      struct i2c_client *client;
+-      int ret;
+-
+-      ret = i2c_add_driver(&wm8753_i2c_driver);
+-      if (ret != 0) {
+-              dev_err(&pdev->dev, "can't add i2c driver\n");
+-              return ret;
+-      }
+-
+-      memset(&info, 0, sizeof(struct i2c_board_info));
+-      info.addr = setup->i2c_address;
+-      strlcpy(info.type, "wm8753", I2C_NAME_SIZE);
+-
+-      adapter = i2c_get_adapter(setup->i2c_bus);
+-      if (!adapter) {
+-              dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+-                      setup->i2c_bus);
+-              goto err_driver;
+-      }
+-
+-      client = i2c_new_device(adapter, &info);
+-      i2c_put_adapter(adapter);
+-      if (!client) {
+-              dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+-                      (unsigned int)info.addr);
+-              goto err_driver;
+-      }
+-
+-      return 0;
+-
+-err_driver:
+-      i2c_del_driver(&wm8753_i2c_driver);
+-      return -ENODEV;
+-}
+ #endif
+ #if defined(CONFIG_SPI_MASTER)
+-static int __devinit wm8753_spi_probe(struct spi_device *spi)
+-{
+-      struct snd_soc_device *socdev = wm8753_socdev;
+-      struct snd_soc_codec *codec = socdev->codec;
+-      int ret;
+-
+-      codec->control_data = spi;
+-
+-      ret = wm8753_init(socdev);
+-      if (ret < 0)
+-              dev_err(&spi->dev, "failed to initialise WM8753\n");
+-
+-      return ret;
+-}
+-
+-static int __devexit wm8753_spi_remove(struct spi_device *spi)
+-{
+-      return 0;
+-}
+-
+-static struct spi_driver wm8753_spi_driver = {
+-      .driver = {
+-              .name   = "wm8753",
+-              .bus    = &spi_bus_type,
+-              .owner  = THIS_MODULE,
+-      },
+-      .probe          = wm8753_spi_probe,
+-      .remove         = __devexit_p(wm8753_spi_remove),
+-};
+-
+ static int wm8753_spi_write(struct spi_device *spi, const char *data, int len)
+ {
+       struct spi_transfer t;
+@@ -1769,120 +1817,69 @@
+       return len;
+ }
+-#endif
+-
+-static int wm8753_probe(struct platform_device *pdev)
++static int __devinit wm8753_spi_probe(struct spi_device *spi)
+ {
+-      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+-      struct wm8753_setup_data *setup;
+       struct snd_soc_codec *codec;
+       struct wm8753_priv *wm8753;
+-      int ret = 0;
+-
+-      pr_info("WM8753 Audio Codec %s", WM8753_VERSION);
+-
+-      setup = socdev->codec_data;
+-      codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+-      if (codec == NULL)
+-              return -ENOMEM;
+       wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL);
+-      if (wm8753 == NULL) {
+-              kfree(codec);
++      if (wm8753 == NULL)
+               return -ENOMEM;
+-      }
+-      codec->private_data = wm8753;
+-      socdev->codec = codec;
+-      mutex_init(&codec->mutex);
+-      INIT_LIST_HEAD(&codec->dapm_widgets);
+-      INIT_LIST_HEAD(&codec->dapm_paths);
+-      wm8753_socdev = socdev;
+-      INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
++      codec = &wm8753->codec;
++      codec->control_data = spi;
++      codec->hw_write = (hw_write_t)wm8753_spi_write;
++      codec->dev = &spi->dev;
+-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+-      if (setup->i2c_address) {
+-              codec->hw_write = (hw_write_t)i2c_master_send;
+-              ret = wm8753_add_i2c_device(pdev, setup);
+-      }
+-#endif
+-#if defined(CONFIG_SPI_MASTER)
+-      if (setup->spi) {
+-              codec->hw_write = (hw_write_t)wm8753_spi_write;
+-              ret = spi_register_driver(&wm8753_spi_driver);
+-              if (ret != 0)
+-                      printk(KERN_ERR "can't add spi driver");
+-      }
+-#endif
++      spi->dev.driver_data = wm8753;
+-      if (ret != 0) {
+-              kfree(codec->private_data);
+-              kfree(codec);
+-      }
+-      return ret;
++      return wm8753_register(wm8753);
+ }
+-/*
+- * This function forces any delayed work to be queued and run.
+- */
+-static int run_delayed_work(struct delayed_work *dwork)
++static int __devexit wm8753_spi_remove(struct spi_device *spi)
+ {
+-      int ret;
+-
+-      /* cancel any work waiting to be queued. */
+-      ret = cancel_delayed_work(dwork);
+-
+-      /* if there was any work waiting then we run it now and
+-       * wait for it's completion */
+-      if (ret) {
+-              schedule_delayed_work(dwork, 0);
+-              flush_scheduled_work();
+-      }
+-      return ret;
++      struct wm8753_priv *wm8753 = spi->dev.driver_data;
++      wm8753_unregister(wm8753);
++      return 0;
+ }
+-/* power down chip */
+-static int wm8753_remove(struct platform_device *pdev)
+-{
+-      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+-      struct snd_soc_codec *codec = socdev->codec;
++static struct spi_driver wm8753_spi_driver = {
++      .driver = {
++              .name   = "wm8753",
++              .bus    = &spi_bus_type,
++              .owner  = THIS_MODULE,
++      },
++      .probe          = wm8753_spi_probe,
++      .remove         = __devexit_p(wm8753_spi_remove),
++};
++#endif
+-      if (codec->control_data)
+-              wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF);
+-      run_delayed_work(&codec->delayed_work);
+-      snd_soc_free_pcms(socdev);
+-      snd_soc_dapm_free(socdev);
++static int __init wm8753_modinit(void)
++{
++      int ret;
+ #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+-      i2c_unregister_device(codec->control_data);
+-      i2c_del_driver(&wm8753_i2c_driver);
++      ret = i2c_add_driver(&wm8753_i2c_driver);
++      if (ret != 0)
++              pr_err("Failed to register WM8753 I2C driver: %d\n", ret);
+ #endif
+ #if defined(CONFIG_SPI_MASTER)
+-      spi_unregister_driver(&wm8753_spi_driver);
++      ret = spi_register_driver(&wm8753_spi_driver);
++      if (ret != 0)
++              pr_err("Failed to register WM8753 SPI driver: %d\n", ret);
+ #endif
+-      kfree(codec->private_data);
+-      kfree(codec);
+-
+       return 0;
+ }
+-
+-struct snd_soc_codec_device soc_codec_dev_wm8753 = {
+-      .probe =        wm8753_probe,
+-      .remove =       wm8753_remove,
+-      .suspend =      wm8753_suspend,
+-      .resume =       wm8753_resume,
+-};
+-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753);
+-
+-static int __init wm8753_modinit(void)
+-{
+-      return snd_soc_register_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai));
+-}
+ module_init(wm8753_modinit);
+ static void __exit wm8753_exit(void)
+ {
+-      snd_soc_unregister_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai));
++#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
++      i2c_del_driver(&wm8753_i2c_driver);
++#endif
++#if defined(CONFIG_SPI_MASTER)
++      spi_unregister_driver(&wm8753_spi_driver);
++#endif
+ }
+ module_exit(wm8753_exit);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.h linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8753.h
+--- linux-2.6.29-rc3.owrt/sound/soc/codecs/wm8753.h    2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/codecs/wm8753.h 2009-05-10 22:28:00.000000000 +0200
+@@ -77,12 +77,6 @@
+ #define WM8753_BIASCTL                0x3d
+ #define WM8753_ADCTL2         0x3f
+-struct wm8753_setup_data {
+-      int spi;
+-      int i2c_bus;
+-      unsigned short i2c_address;
+-};
+-
+ #define WM8753_PLL1                   0
+ #define WM8753_PLL2                   1
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/jive_wm8750.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/jive_wm8750.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/jive_wm8750.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/jive_wm8750.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,216 @@
++/* sound/soc/s3c24xx/jive_wm8750.c
++ *
++ * Copyright 2007,2008 Simtec Electronics
++ *
++ * Based on sound/soc/pxa/spitz.c
++ *    Copyright 2005 Wolfson Microelectronics PLC.
++ *    Copyright 2005 Openedhand Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++
++#include "s3c24xx-pcm.h"
++#include "s3c2412-i2s.h"
++
++#include "../codecs/wm8750.h"
++
++static const struct snd_soc_dapm_route audio_map[] = {
++      { "Headphone Jack", NULL, "LOUT1" },
++      { "Headphone Jack", NULL, "ROUT1" },
++      { "Internal Speaker", NULL, "LOUT2" },
++      { "Internal Speaker", NULL, "ROUT2" },
++      { "LINPUT1", NULL, "Line Input" },
++      { "RINPUT1", NULL, "Line Input" },
++};
++
++static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
++      SND_SOC_DAPM_HP("Headphone Jack", NULL),
++      SND_SOC_DAPM_SPK("Internal Speaker", NULL),
++      SND_SOC_DAPM_LINE("Line In", NULL),
++};
++
++static int jive_startup(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec *codec = rtd->socdev->codec;
++
++      snd_soc_dapm_enable_pin(codec, "Headphone Jack");
++      snd_soc_dapm_enable_pin(codec, "Internal Speaker");
++      snd_soc_dapm_enable_pin(codec, "Line In");
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int jive_hw_params(struct snd_pcm_substream *substream,
++                        struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++      struct s3c_i2sv2_rate_calc div;
++      unsigned int clk = 0;
++      int ret = 0;
++
++      switch (params_rate(params)) {
++      case 8000:
++      case 16000:
++      case 48000:
++      case 96000:
++              clk = 12288000;
++              break;
++      case 11025:
++      case 22050:
++      case 44100:
++              clk = 11289600;
++              break;
++      }
++
++      s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
++                          s3c2412_get_iisclk());
++
++      /* set codec DAI configuration */
++      ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
++                                SND_SOC_DAIFMT_NB_NF |
++                                SND_SOC_DAIFMT_CBS_CFS);
++      if (ret < 0)
++              return ret;
++
++      /* set cpu DAI configuration */
++      ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
++                                SND_SOC_DAIFMT_NB_NF |
++                                SND_SOC_DAIFMT_CBS_CFS);
++      if (ret < 0)
++              return ret;
++
++      /* set the codec system clock for DAC and ADC */
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
++                                   SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              return ret;
++
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div);
++      if (ret < 0)
++              return ret;
++
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER,
++                                   div.clk_div - 1);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static struct snd_soc_ops jive_ops = {
++      .startup        = jive_startup,
++      .hw_params      = jive_hw_params,
++};
++
++static int jive_wm8750_init(struct snd_soc_codec *codec)
++{
++      int err;
++
++      /* These endpoints are not being used. */
++      snd_soc_dapm_disable_pin(codec, "LINPUT2");
++      snd_soc_dapm_disable_pin(codec, "RINPUT2");
++      snd_soc_dapm_disable_pin(codec, "LINPUT3");
++      snd_soc_dapm_disable_pin(codec, "RINPUT3");
++      snd_soc_dapm_disable_pin(codec, "OUT3");
++      snd_soc_dapm_disable_pin(codec, "MONO");
++
++      /* Add jive specific widgets */
++      err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
++                                      ARRAY_SIZE(wm8750_dapm_widgets));
++      if (err) {
++              printk(KERN_ERR "%s: failed to add widgets (%d)\n",
++                     __func__, err);
++              return err;
++      }
++
++      snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static struct snd_soc_dai_link jive_dai = {
++      .name           = "wm8750",
++      .stream_name    = "WM8750",
++      .cpu_dai        = &s3c2412_i2s_dai,
++      .codec_dai      = &wm8750_dai,
++      .init           = jive_wm8750_init,
++      .ops            = &jive_ops,
++};
++
++/* jive audio machine driver */
++static struct snd_soc_machine snd_soc_machine_jive = {
++      .name           = "Jive",
++      .dai_link       = &jive_dai,
++      .num_links      = 1,
++};
++
++/* jive audio private data */
++static struct wm8750_setup_data jive_wm8750_setup = {
++};
++
++/* jive audio subsystem */
++static struct snd_soc_device jive_snd_devdata = {
++      .machine        = &snd_soc_machine_jive,
++      .platform       = &s3c24xx_soc_platform,
++      .codec_dev      = &soc_codec_dev_wm8750_spi,
++      .codec_data     = &jive_wm8750_setup,
++};
++
++static struct platform_device *jive_snd_device;
++
++static int __init jive_init(void)
++{
++      int ret;
++
++      if (!machine_is_jive())
++              return 0;
++
++      printk("JIVE WM8750 Audio support\n");
++
++      jive_snd_device = platform_device_alloc("soc-audio", -1);
++      if (!jive_snd_device)
++              return -ENOMEM;
++
++      platform_set_drvdata(jive_snd_device, &jive_snd_devdata);
++      jive_snd_devdata.dev = &jive_snd_device->dev;
++      ret = platform_device_add(jive_snd_device);
++
++      if (ret)
++              platform_device_put(jive_snd_device);
++
++      return ret;
++}
++
++static void __exit jive_exit(void)
++{
++      platform_device_unregister(jive_snd_device);
++}
++
++module_init(jive_init);
++module_exit(jive_exit);
++
++MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
++MODULE_DESCRIPTION("ALSA SoC Jive Audio support");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/Kconfig linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/Kconfig
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/Kconfig    2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/Kconfig 2009-05-10 22:28:00.000000000 +0200
+@@ -1,6 +1,6 @@
+ config SND_S3C24XX_SOC
+       tristate "SoC Audio for the Samsung S3C24XX chips"
+-      depends on ARCH_S3C2410
++      depends on ARCH_S3C2410 || ARCH_S3C64XX
+       help
+         Say Y or M if you want to add support for codecs attached to
+         the S3C24XX AC97, I2S or SSP interface. You will also need
+@@ -9,8 +9,16 @@
+ config SND_S3C24XX_SOC_I2S
+       tristate
++config SND_S3C_I2SV2_SOC
++      tristate
++
+ config SND_S3C2412_SOC_I2S
+       tristate
++      select SND_S3C_I2SV2_SOC
++
++config SND_S3C64XX_SOC_I2S
++      tristate
++      select SND_S3C_I2SV2_SOC
+ config SND_S3C2443_SOC_AC97
+       tristate
+@@ -26,6 +34,33 @@
+         Say Y if you want to add support for SoC audio on smdk2440
+         with the WM8753.
++config SND_S3C24XX_SOC_JIVE_WM8750
++      tristate "SoC I2S Audio support for Jive"
++      depends on SND_S3C24XX_SOC && MACH_JIVE
++      select SND_SOC_WM8750
++      select SND_SOC_WM8750_SPI
++      select SND_S3C2412_SOC_I2S
++      help
++        Sat Y if you want to add support for SoC audio on the Jive.
++
++config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
++      tristate "SoC I2S Audio support for NEO1973 GTA02 - WM8753"
++      depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
++      select SND_S3C24XX_SOC_I2S
++      select SND_SOC_WM8753
++      help
++        Say Y if you want to add support for SoC audio on neo1973 gta02
++        with the WM8753 codec
++
++config SND_S3C24XX_SOC_OM_3D7K_WM8753
++      tristate "SoC I2S Audio support for OM 3D7K - WM8753"
++      depends on SND_S3C24XX_SOC && MACH_OM_3D7K
++      select SND_S3C64XX_SOC_I2S
++      select SND_SOC_WM8753
++      help
++        Say Y if you want support for SoC audio on Openmoko 3D7K
++        with the WM8753 codec.
++
+ config SND_S3C24XX_SOC_SMDK2443_WM9710
+       tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+       depends on SND_S3C24XX_SOC && MACH_SMDK2443
+@@ -49,3 +84,11 @@
+               depends on SND_S3C24XX_SOC
+               select SND_S3C24XX_SOC_I2S
+               select SND_SOC_UDA134X
++
++config SND_S3C64XX_SOC_SMDK6410_WM8731
++      tristate "SoC I2S Audio support for WM8731 added to an SMDK6410"
++      depends on SND_S3C24XX_SOC
++      select SND_S3C64XX_SOC_I2S
++      select SND_SOC_WM8731
++      help
++        Support for an WM8731 add-on board on I2S channel 0 on an SMDK6410
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/Makefile linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/Makefile
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/Makefile   2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/Makefile        2009-05-10 22:28:00.000000000 +0200
+@@ -2,20 +2,32 @@
+ snd-soc-s3c24xx-objs := s3c24xx-pcm.o
+ snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
+ snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
++snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
+ snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o
++snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
+ obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
+ obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o
+ obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
++obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
++obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
+ # S3C24XX Machine Support
++snd-soc-jive-wm8750-objs := jive_wm8750.o
+ snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+ snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
++snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
++snd-soc-om-3d7k-wm8753-objs := om_3d7k_wm8753.o
++snd-soc-smdk6410-wm8731-objs := smdk6410-wm8731.o
++obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
++obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
++obj-$(CONFIG_SND_S3C24XX_SOC_OM_3D7K_WM8753) += snd-soc-om-3d7k-wm8753.o
++obj-$(CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8731) += snd-soc-smdk6410-wm8731.o
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/neo1973_gta02_wm8753.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/neo1973_gta02_wm8753.c     1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/neo1973_gta02_wm8753.c  2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,481 @@
++/*
++ * neo1973_gta02_wm8753.c  --  SoC audio for Neo1973
++ *
++ * Copyright 2007 Openmoko Inc
++ * Author: Graeme Gregory <graeme@openmoko.org>
++ * Copyright 2007 Wolfson Microelectronics PLC.
++ * Author: Graeme Gregory <linux@wolfsonmicro.com>
++ * Copyright 2009 Wolfson Microelectronics
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++
++#include <plat/regs-iis.h>
++
++#include <mach/regs-clock.h>
++#include <mach/regs-gpio.h>
++#include <mach/hardware.h>
++#include <asm/io.h>
++#include <mach/regs-gpioj.h>
++#include <mach/gta02.h>
++#include "../codecs/wm8753.h"
++#include "s3c24xx-pcm.h"
++#include "s3c24xx-i2s.h"
++
++static struct snd_soc_card neo1973_gta02;
++
++static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
++      struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++      unsigned int pll_out = 0, bclk = 0;
++      int ret = 0;
++      unsigned long iis_clkrate;
++
++      iis_clkrate = s3c24xx_i2s_get_clockrate();
++
++      switch (params_rate(params)) {
++      case 8000:
++      case 16000:
++              pll_out = 12288000;
++              break;
++      case 48000:
++              bclk = WM8753_BCLK_DIV_4;
++              pll_out = 12288000;
++              break;
++      case 96000:
++              bclk = WM8753_BCLK_DIV_2;
++              pll_out = 12288000;
++              break;
++      case 11025:
++              bclk = WM8753_BCLK_DIV_16;
++              pll_out = 11289600;
++              break;
++      case 22050:
++              bclk = WM8753_BCLK_DIV_8;
++              pll_out = 11289600;
++              break;
++      case 44100:
++              bclk = WM8753_BCLK_DIV_4;
++              pll_out = 11289600;
++              break;
++      case 88200:
++              bclk = WM8753_BCLK_DIV_2;
++              pll_out = 11289600;
++              break;
++      }
++
++      /* set codec DAI configuration */
++      ret = snd_soc_dai_set_fmt(codec_dai,
++              SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++              SND_SOC_DAIFMT_CBM_CFM);
++      if (ret < 0)
++              return ret;
++
++      /* set cpu DAI configuration */
++      ret = snd_soc_dai_set_fmt(cpu_dai,
++              SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++              SND_SOC_DAIFMT_CBM_CFM);
++      if (ret < 0)
++              return ret;
++
++      /* set the codec system clock for DAC and ADC */
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
++              SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              return ret;
++
++      /* set MCLK division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
++              S3C2410_IISMOD_32FS);
++      if (ret < 0)
++              return ret;
++
++      /* set codec BCLK division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(codec_dai,
++                                      WM8753_BCLKDIV, bclk);
++      if (ret < 0)
++              return ret;
++
++      /* set prescaler division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
++              S3C24XX_PRESCALE(4, 4));
++      if (ret < 0)
++              return ret;
++
++      /* codec PLL input is PCLK/4 */
++      ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
++              iis_clkrate / 4, pll_out);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++
++      /* disable the PLL */
++      return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
++}
++
++/*
++ * Neo1973 WM8753 HiFi DAI opserations.
++ */
++static struct snd_soc_ops neo1973_gta02_hifi_ops = {
++      .hw_params = neo1973_gta02_hifi_hw_params,
++      .hw_free = neo1973_gta02_hifi_hw_free,
++};
++
++static int neo1973_gta02_voice_hw_params(
++      struct snd_pcm_substream *substream,
++      struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      unsigned int pcmdiv = 0;
++      int ret = 0;
++      unsigned long iis_clkrate;
++
++      iis_clkrate = s3c24xx_i2s_get_clockrate();
++
++      if (params_rate(params) != 8000)
++              return -EINVAL;
++      if (params_channels(params) != 1)
++              return -EINVAL;
++
++      pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
++
++      /* todo: gg check mode (DSP_B) against CSR datasheet */
++      /* set codec DAI configuration */
++      ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
++              SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
++      if (ret < 0)
++              return ret;
++
++      /* set the codec system clock for DAC and ADC */
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
++              12288000, SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              return ret;
++
++      /* set codec PCM division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
++                                      pcmdiv);
++      if (ret < 0)
++              return ret;
++
++      /* configue and enable PLL for 12.288MHz output */
++      ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
++              iis_clkrate / 4, 12288000);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++
++      /* disable the PLL */
++      return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
++}
++
++static struct snd_soc_ops neo1973_gta02_voice_ops = {
++      .hw_params = neo1973_gta02_voice_hw_params,
++      .hw_free = neo1973_gta02_voice_hw_free,
++};
++
++#define LM4853_AMP 1
++#define LM4853_SPK 2
++
++static u8 lm4853_state;
++
++/* This has no effect, it exists only to maintain compatibility with
++ * existing ALSA state files.
++ */
++static int lm4853_set_state(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      int val = ucontrol->value.integer.value[0];
++
++      if (val)
++              lm4853_state |= LM4853_AMP;
++      else
++              lm4853_state &= ~LM4853_AMP;
++
++      return 0;
++}
++
++static int lm4853_get_state(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
++
++      return 0;
++}
++
++static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      int val = ucontrol->value.integer.value[0];
++
++      if (val) {
++              lm4853_state |= LM4853_SPK;
++              s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 0);
++      } else {
++              lm4853_state &= ~LM4853_SPK;
++              s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
++      }
++
++      return 0;
++}
++
++static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
++
++      return 0;
++}
++
++static int lm4853_event(struct snd_soc_dapm_widget *w,
++                      struct snd_kcontrol *k,
++                      int event)
++{
++      if (SND_SOC_DAPM_EVENT_ON(event))
++              s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
++
++      if (SND_SOC_DAPM_EVENT_OFF(event))
++              s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
++
++      return 0;
++}
++
++static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
++      SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
++      SND_SOC_DAPM_LINE("GSM Line Out", NULL),
++      SND_SOC_DAPM_LINE("GSM Line In", NULL),
++      SND_SOC_DAPM_MIC("Headset Mic", NULL),
++      SND_SOC_DAPM_MIC("Handset Mic", NULL),
++      SND_SOC_DAPM_SPK("Handset Spk", NULL),
++};
++
++
++/* example machine audio_mapnections */
++static const struct snd_soc_dapm_route audio_map[] = {
++
++      /* Connections to the lm4853 amp */
++      {"Stereo Out", NULL, "LOUT1"},
++      {"Stereo Out", NULL, "ROUT1"},
++
++      /* Connections to the GSM Module */
++      {"GSM Line Out", NULL, "MONO1"},
++      {"GSM Line Out", NULL, "MONO2"},
++      {"RXP", NULL, "GSM Line In"},
++      {"RXN", NULL, "GSM Line In"},
++
++      /* Connections to Headset */
++      {"MIC1", NULL, "Mic Bias"},
++      {"Mic Bias", NULL, "Headset Mic"},
++
++      /* Call Mic */
++      {"MIC2", NULL, "Mic Bias"},
++      {"MIC2N", NULL, "Mic Bias"},
++      {"Mic Bias", NULL, "Handset Mic"},
++
++      /* Call Speaker */
++      {"Handset Spk", NULL, "LOUT2"},
++      {"Handset Spk", NULL, "ROUT2"},
++
++      /* Connect the ALC pins */
++      {"ACIN", NULL, "ACOP"},
++};
++
++static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
++      SOC_DAPM_PIN_SWITCH("Stereo Out"),
++      SOC_DAPM_PIN_SWITCH("GSM Line Out"),
++      SOC_DAPM_PIN_SWITCH("GSM Line In"),
++      SOC_DAPM_PIN_SWITCH("Headset Mic"),
++      SOC_DAPM_PIN_SWITCH("Handset Mic"),
++      SOC_DAPM_PIN_SWITCH("Handset Spk"),
++
++      /* This has no effect, it exists only to maintain compatibility with
++       * existing ALSA state files.
++       */
++      SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
++              lm4853_get_state,
++              lm4853_set_state),
++      SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
++              lm4853_get_spk,
++              lm4853_set_spk),
++};
++
++/*
++ * This is an example machine initialisation for a wm8753 connected to a
++ * neo1973 GTA02.
++ */
++static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
++{
++      int i, err;
++
++      /* set up NC codec pins */
++      snd_soc_dapm_nc_pin(codec, "OUT3");
++      snd_soc_dapm_nc_pin(codec, "OUT4");
++      snd_soc_dapm_nc_pin(codec, "LINE1");
++      snd_soc_dapm_nc_pin(codec, "LINE2");
++
++      /* Add neo1973 gta02 specific widgets */
++      snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
++                                ARRAY_SIZE(wm8753_dapm_widgets));
++
++      /* add neo1973 gta02 specific controls */
++      for (i = 0; i < ARRAY_SIZE(wm8753_neo1973_gta02_controls); i++) {
++              err = snd_ctl_add(codec->card,
++                      snd_soc_cnew(&wm8753_neo1973_gta02_controls[i],
++                      codec, NULL));
++              if (err < 0)
++                      return err;
++      }
++
++      /* set up neo1973 gta02 specific audio path audio_map */
++      snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
++
++      /* set endpoints to default off mode */
++      snd_soc_dapm_disable_pin(codec, "Stereo Out");
++      snd_soc_dapm_disable_pin(codec, "GSM Line Out");
++      snd_soc_dapm_disable_pin(codec, "GSM Line In");
++      snd_soc_dapm_disable_pin(codec, "Headset Mic");
++      snd_soc_dapm_disable_pin(codec, "Handset Mic");
++      snd_soc_dapm_disable_pin(codec, "Handset Spk");
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++/*
++ * BT Codec DAI
++ */
++static struct snd_soc_dai bt_dai = {
++      .name = "Bluetooth",
++      .id = 0,
++      .playback = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,},
++      .capture = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,},
++};
++
++static struct snd_soc_dai_link neo1973_gta02_dai[] = {
++{ /* Hifi Playback - for similatious use with voice below */
++      .name = "WM8753",
++      .stream_name = "WM8753 HiFi",
++      .cpu_dai = &s3c24xx_i2s_dai,
++      .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
++      .init = neo1973_gta02_wm8753_init,
++      .ops = &neo1973_gta02_hifi_ops,
++},
++{ /* Voice via BT */
++      .name = "Bluetooth",
++      .stream_name = "Voice",
++      .cpu_dai = &bt_dai,
++      .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
++      .ops = &neo1973_gta02_voice_ops,
++},
++};
++
++static struct snd_soc_card neo1973_gta02 = {
++      .name = "neo1973-gta02",
++      .platform = &s3c24xx_soc_platform,
++      .dai_link = neo1973_gta02_dai,
++      .num_links = ARRAY_SIZE(neo1973_gta02_dai),
++};
++
++static struct snd_soc_device neo1973_gta02_snd_devdata = {
++      .card = &neo1973_gta02,
++      .codec_dev = &soc_codec_dev_wm8753,
++};
++
++static struct platform_device *neo1973_gta02_snd_device;
++
++static int __init neo1973_gta02_init(void)
++{
++      int ret;
++
++      if (!machine_is_neo1973_gta02()) {
++              printk(KERN_INFO
++                     "Only GTA02 is supported by this ASoC driver\n");
++              return -ENODEV;
++      }
++
++      /* register bluetooth DAI here */
++      ret = snd_soc_register_dai(&bt_dai);
++      if (ret)
++              return ret;
++
++      neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
++      if (!neo1973_gta02_snd_device)
++              return -ENOMEM;
++
++      platform_set_drvdata(neo1973_gta02_snd_device,
++                      &neo1973_gta02_snd_devdata);
++      neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
++      ret = platform_device_add(neo1973_gta02_snd_device);
++
++      if (ret) {
++              platform_device_put(neo1973_gta02_snd_device);
++              return ret;
++      }
++
++      /* Initialise GPIOs used by amp */
++      s3c2410_gpio_cfgpin(GTA02_GPIO_HP_IN, S3C2410_GPIO_OUTPUT);
++      s3c2410_gpio_cfgpin(GTA02_GPIO_AMP_SHUT, S3C2410_GPIO_OUTPUT);
++
++      /* Amp off by default */
++      s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
++
++      /* Speaker off by default */
++      s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
++
++      return ret;
++}
++module_init(neo1973_gta02_init);
++
++static void __exit neo1973_gta02_exit(void)
++{
++      snd_soc_unregister_dai(&bt_dai);
++      platform_device_unregister(neo1973_gta02_snd_device);
++}
++module_exit(neo1973_gta02_exit);
++
++/* Module information */
++MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
++MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/neo1973_wm8753.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/neo1973_wm8753.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/neo1973_wm8753.c   2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/neo1973_wm8753.c        2009-05-10 22:28:00.000000000 +0200
+@@ -29,11 +29,11 @@
+ #include <mach/regs-clock.h>
+ #include <mach/regs-gpio.h>
+ #include <mach/hardware.h>
+-#include <mach/audio.h>
++#include <plat/audio.h>
+ #include <linux/io.h>
+ #include <mach/spi-gpio.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include "../codecs/wm8753.h"
+ #include "lm4857.h"
+@@ -585,15 +585,9 @@
+       .num_links = ARRAY_SIZE(neo1973_dai),
+ };
+-static struct wm8753_setup_data neo1973_wm8753_setup = {
+-      .i2c_bus = 0,
+-      .i2c_address = 0x1a,
+-};
+-
+ static struct snd_soc_device neo1973_snd_devdata = {
+       .card = &neo1973,
+       .codec_dev = &soc_codec_dev_wm8753,
+-      .codec_data = &neo1973_wm8753_setup,
+ };
+ static int lm4857_i2c_probe(struct i2c_client *client,
+@@ -652,13 +646,13 @@
+ }
+ static const struct i2c_device_id lm4857_i2c_id[] = {
+-      { "neo1973_lm4857", 0 },
++      { "lm4857", 0 },
+       { }
+ };
+ static struct i2c_driver lm4857_i2c_driver = {
+       .driver = {
+-              .name = "LM4857 I2C Amp",
++              .name = "lm4857",
+               .owner = THIS_MODULE,
+       },
+       .suspend =        lm4857_suspend,
+@@ -675,7 +669,7 @@
+ {
+       int ret;
+-      DBG("Entered %s\n", __func__);
++      printk(KERN_DEBUG "Entered %s\n", __func__);
+       if (!machine_is_neo1973_gta01()) {
+               printk(KERN_INFO
+@@ -683,6 +677,11 @@
+               return -ENODEV;
+       }
++      /* register bluetooth DAI here */
++      ret = snd_soc_register_dai(&bt_dai);
++      if (ret)
++              return ret;
++
+       neo1973_snd_device = platform_device_alloc("soc-audio", -1);
+       if (!neo1973_snd_device)
+               return -ENOMEM;
+@@ -708,6 +707,7 @@
+ {
+       DBG("Entered %s\n", __func__);
++      snd_soc_unregister_dai(&bt_dai);
+       i2c_del_driver(&lm4857_i2c_driver);
+       platform_device_unregister(neo1973_snd_device);
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/om_3d7k_wm8753.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/om_3d7k_wm8753.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/om_3d7k_wm8753.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/om_3d7k_wm8753.c        2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,600 @@
++/*
++ * om_3d7k_wm8753.c  --  SoC audio for 3D7K
++ *
++ * Based on neo1973_gta02_wm8753
++ *
++ * Copyright 2009 Openmoko Inc
++ * Author: Ben Dooks <ben@simtec.co.uk>
++ * Copyright 2007 Openmoko Inc
++ * Author: Graeme Gregory <graeme@openmoko.org>
++ * Copyright 2007 Wolfson Microelectronics PLC.
++ * Author: Graeme Gregory <linux@wolfsonmicro.com>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware/scoop.h>
++
++#include <plat/regs-s3c2412-iis.h>
++
++#include "../codecs/wm8753.h"
++#include "s3c24xx-pcm.h"
++#include "s3c64xx-i2s.h"
++
++/* define the scenarios */
++#define NEO_AUDIO_OFF                 0
++#define NEO_GSM_CALL_AUDIO_HANDSET    1
++#define NEO_GSM_CALL_AUDIO_HEADSET    2
++#define NEO_GSM_CALL_AUDIO_BLUETOOTH  3
++#define NEO_STEREO_TO_SPEAKERS                4
++#define NEO_STEREO_TO_HEADPHONES      5
++#define NEO_CAPTURE_HANDSET           6
++#define NEO_CAPTURE_HEADSET           7
++#define NEO_CAPTURE_BLUETOOTH         8
++#define NEO_STEREO_TO_HANDSET_SPK     9
++
++static struct snd_soc_card om_3d7k;
++
++static int om_3d7k_hifi_hw_params(struct snd_pcm_substream *substream,
++                                 struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++      unsigned int pll_out = 0, bclk = 0;
++      int ret = 0;
++      unsigned long iis_clkrate;
++
++      iis_clkrate = s3c64xx_i2s_get_clockrate(cpu_dai);
++
++      switch (params_rate(params)) {
++      case 8000:
++      case 16000:
++              pll_out = 12288000;
++              break;
++      case 48000:
++              bclk = WM8753_BCLK_DIV_4;
++              pll_out = 12288000;
++              break;
++      case 96000:
++              bclk = WM8753_BCLK_DIV_2;
++              pll_out = 12288000;
++              break;
++      case 11025:
++              bclk = WM8753_BCLK_DIV_16;
++              pll_out = 11289600;
++              break;
++      case 22050:
++              bclk = WM8753_BCLK_DIV_8;
++              pll_out = 11289600;
++              break;
++      case 44100:
++              bclk = WM8753_BCLK_DIV_4;
++              pll_out = 11289600;
++              break;
++      case 88200:
++              bclk = WM8753_BCLK_DIV_2;
++              pll_out = 11289600;
++              break;
++      }
++
++      ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_MUX, 0,
++                                   SND_SOC_CLOCK_OUT);
++      if (ret < 0)
++              goto err;
++
++      /* set codec DAI configuration */
++      ret = snd_soc_dai_set_fmt(codec_dai,
++                                SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF |
++                                SND_SOC_DAIFMT_CBM_CFM);
++      if (ret < 0)
++              goto err;
++
++      /* set cpu DAI configuration */
++      ret = snd_soc_dai_set_fmt(cpu_dai,
++                                SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++                                SND_SOC_DAIFMT_CBM_CFM);
++      if (ret < 0)
++              goto err;
++
++      /* set the codec system clock for DAC and ADC */
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
++                                   SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              goto err;
++
++#if 0
++      /* do not think we need to set this if the cpu is not the bitclk
++       * master */
++      /* set MCLK division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
++                                   S3C2410_IISMOD_32FS);
++      if (ret < 0)
++              return ret;
++#endif
++
++      /* set codec BCLK division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk);
++      if (ret < 0)
++              goto err;
++
++      /* set prescaler division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C64XX_DIV_PRESCALER, 2-1);
++      if (ret < 0)
++              goto err;
++
++      /* codec PLL input is ACLK/2 */
++      ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
++                                iis_clkrate / 2, pll_out);
++      if (ret < 0)
++              goto err;
++
++      return 0;
++
++err:
++      printk(KERN_ERR "%s: failed %d\n", __func__, ret);
++      return ret;
++}
++
++static int om_3d7k_hifi_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++
++      /* disable the PLL */
++      return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
++}
++
++/*
++ * 3D7K WM8753 HiFi DAI opserations.
++ */
++static struct snd_soc_ops om_3d7k_hifi_ops = {
++      .hw_params      = om_3d7k_hifi_hw_params,
++      .hw_free        = om_3d7k_hifi_hw_free,
++};
++
++static int om_3d7k_voice_hw_params(struct snd_pcm_substream *substream,
++                                  struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      unsigned int pcmdiv = 0;
++      int ret = 0;
++      unsigned long iis_clkrate;
++
++      iis_clkrate = s3c64xx_i2s_get_clockrate(rtd->dai->cpu_dai);
++
++      if (params_rate(params) != 8000)
++              return -EINVAL;
++      if (params_channels(params) != 1)
++              return -EINVAL;
++
++      pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
++
++      /* todo: gg check mode (DSP_B) against CSR datasheet */
++      /* set codec DAI configuration */
++      ret = snd_soc_dai_set_fmt(codec_dai, (SND_SOC_DAIFMT_DSP_B |
++                                            SND_SOC_DAIFMT_NB_NF |
++                                            SND_SOC_DAIFMT_CBS_CFS));
++      if (ret < 0)
++              return ret;
++
++      /* set the codec system clock for DAC and ADC */
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
++                                   12288000, SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              return ret;
++
++      /* set codec PCM division for sample rate */
++      ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv);
++      if (ret < 0)
++              return ret;
++
++      /* configue and enable PLL for 12.288MHz output */
++      ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
++                                iis_clkrate / 2, 12288000);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++static int om_3d7k_voice_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++
++      /* disable the PLL */
++      return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
++}
++
++static struct snd_soc_ops om_3d7k_voice_ops = {
++      .hw_params      = om_3d7k_voice_hw_params,
++      .hw_free        = om_3d7k_voice_hw_free,
++};
++
++static int om_3d7k_set_stereo_out(struct snd_kcontrol *kcontrol,
++                                 struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "Stereo Out", val);
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_stereo_out(struct snd_kcontrol *kcontrol,
++                                 struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "Stereo Out");
++
++      return 0;
++}
++
++
++static int om_3d7k_set_gsm_out(struct snd_kcontrol *kcontrol,
++                              struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "GSM Line Out", val);
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_gsm_out(struct snd_kcontrol *kcontrol,
++                              struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "GSM Line Out");
++
++      return 0;
++}
++
++static int om_3d7k_set_gsm_in(struct snd_kcontrol *kcontrol,
++                             struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "GSM Line In", val);
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_gsm_in(struct snd_kcontrol *kcontrol,
++                             struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "GSM Line In");
++
++      return 0;
++}
++
++static int om_3d7k_set_headset_mic(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "Headset Mic", val);
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_headset_mic(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "Headset Mic");
++
++      return 0;
++}
++
++static int om_3d7k_set_handset_mic(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "Handset Mic", val);
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_handset_mic(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "Handset Mic");
++
++      return 0;
++}
++
++static int om_3d7k_set_handset_spk(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "Handset Spk", val);
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_handset_spk(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "Handset Spk");
++
++      return 0;
++}
++
++static int om_3d7k_set_headset_spk(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      int val = ucontrol->value.integer.value[0];
++
++      snd_soc_dapm_set_endpoint(codec, "Headset Spk", val);
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++static int om_3d7k_get_headset_spk(struct snd_kcontrol *kcontrol,
++                                  struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_endpoint(codec, "Headset Spk");
++
++      return 0;
++}
++
++static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
++      SND_SOC_DAPM_LINE("Stereo Out", NULL),
++      SND_SOC_DAPM_LINE("GSM Line Out", NULL),
++      SND_SOC_DAPM_LINE("GSM Line In", NULL),
++      SND_SOC_DAPM_MIC("Headset Mic", NULL),
++      SND_SOC_DAPM_MIC("Handset Mic", NULL),
++      SND_SOC_DAPM_SPK("Handset Spk", NULL),
++      SND_SOC_DAPM_SPK("Headset Spk", NULL),
++};
++
++
++/* example machine audio_mapnections */
++static const struct snd_soc_dapm_route audio_map[] = {
++
++      {"Stereo Out", NULL, "LOUT2"},
++      {"Stereo Out", NULL, "ROUT2"},
++
++      /* Connections to the GSM Module */
++      {"GSM Line Out", NULL, "MONO1"},
++      {"GSM Line Out", NULL, "MONO2"},
++      {"RXP", NULL, "GSM Line In"},
++      {"RXN", NULL, "GSM Line In"},
++
++      /* Connections to Headset */
++      {"MIC1", NULL, "Mic Bias"},
++      {"Mic Bias", NULL, "Headset Mic"},
++
++      /* Call Mic */
++      {"MIC2", NULL, "Mic Bias"},
++      {"MIC2N", NULL, "Mic Bias"},
++      {"Mic Bias", NULL, "Handset Mic"},
++
++      /* Call Speaker */
++      {"Handset Spk", NULL, "OUT3"},
++      {"Handset Spk", NULL, "LOUT1"},
++
++      {"Headset Spk", NULL, "ROUT1"},
++      {"Headset Spk", NULL, "LOUT1"},
++
++      /* Connect the ALC pins */
++      {"ACIN", NULL, "ACOP"},
++};
++
++static const struct snd_kcontrol_new wm8753_om_3d7k_controls[] = {
++      SOC_SINGLE_EXT("DAPM Stereo Out Switch", 0, 0, 1, 0,
++              om_3d7k_get_stereo_out,
++              om_3d7k_set_stereo_out),
++      SOC_SINGLE_EXT("DAPM GSM Line Out Switch", 1, 0, 1, 0,
++              om_3d7k_get_gsm_out,
++              om_3d7k_set_gsm_out),
++      SOC_SINGLE_EXT("DAPM GSM Line In Switch", 2, 0, 1, 0,
++              om_3d7k_get_gsm_in,
++              om_3d7k_set_gsm_in),
++      SOC_SINGLE_EXT("DAPM Headset Mic Switch", 3, 0, 1, 0,
++              om_3d7k_get_headset_mic,
++              om_3d7k_set_headset_mic),
++      SOC_SINGLE_EXT("DAPM Handset Mic Switch", 4, 0, 1, 0,
++              om_3d7k_get_handset_mic,
++              om_3d7k_set_handset_mic),
++      SOC_SINGLE_EXT("DAPM Handset Spk Switch", 5, 0, 1, 0,
++              om_3d7k_get_handset_spk,
++              om_3d7k_set_handset_spk),
++      SOC_SINGLE_EXT("DAPM Headset Spk Switch", 6, 0, 1, 0,
++              om_3d7k_get_headset_spk,
++              om_3d7k_set_headset_spk),
++};
++
++/*
++ * This is an example machine initialisation for a wm8753 connected to a
++ * neo1973 GTA02.
++ */
++static int om_3d7k_wm8753_init(struct snd_soc_codec *codec)
++{
++      int i, err;
++
++      /* set up NC codec pins */
++      snd_soc_dapm_set_endpoint(codec, "OUT4",  0);
++      snd_soc_dapm_set_endpoint(codec, "LINE1", 0);
++      snd_soc_dapm_set_endpoint(codec, "LINE2", 0);
++
++
++      /* Add neo1973 gta02 specific widgets */
++      snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
++                                ARRAY_SIZE(wm8753_dapm_widgets));
++
++      /* add neo1973 gta02 specific controls */
++      for (i = 0; i < ARRAY_SIZE(wm8753_om_3d7k_controls); i++) {
++              err = snd_ctl_add(codec->card,
++                      snd_soc_cnew(&wm8753_om_3d7k_controls[i],
++                      codec, NULL));
++              if (err < 0)
++                      return err;
++      }
++
++      /* set up neo1973 gta02 specific audio path audio_mapnects */
++      snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
++
++      /* set endpoints to default off mode */
++      snd_soc_dapm_set_endpoint(codec, "Stereo Out",  0);
++      snd_soc_dapm_set_endpoint(codec, "GSM Line Out",0);
++      snd_soc_dapm_set_endpoint(codec, "GSM Line In", 0);
++      snd_soc_dapm_set_endpoint(codec, "Headset Mic", 0);
++      snd_soc_dapm_set_endpoint(codec, "Handset Mic", 0);
++      snd_soc_dapm_set_endpoint(codec, "Handset Spk", 0);
++      snd_soc_dapm_set_endpoint(codec, "Headset Spk", 0);
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++/*
++ * BT Codec DAI
++ */
++static struct snd_soc_dai bt_dai =
++{     .name = "Bluetooth",
++      .id = 0,
++      .playback = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .capture = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++};
++
++static struct snd_soc_dai_link om_3d7k_dai[] = {
++      { /* Hifi Playback - for similatious use with voice below */
++              .name           = "WM8753",
++              .stream_name    = "WM8753 HiFi",
++              .cpu_dai        = &s3c64xx_i2s_dai,
++              .codec_dai      = &wm8753_dai[WM8753_DAI_HIFI],
++              .init           = om_3d7k_wm8753_init,
++              .ops            = &om_3d7k_hifi_ops,
++      },
++      { /* Voice via BT */
++              .name           = "Bluetooth",
++              .stream_name    = "Voice",
++              .cpu_dai        = &bt_dai,
++              .codec_dai      = &wm8753_dai[WM8753_DAI_VOICE],
++              .ops            = &om_3d7k_voice_ops,
++      },
++};
++
++static struct snd_soc_card om_3d7k = {
++      .name           = "om-3d7k",
++      .platform       = &s3c24xx_soc_platform,
++      .dai_link       = om_3d7k_dai,
++      .num_links      = ARRAY_SIZE(om_3d7k_dai),
++};
++
++static struct snd_soc_device om_3d7k_snd_devdata = {
++      .card           = &om_3d7k,
++      .codec_dev      = &soc_codec_dev_wm8753,
++};
++
++static struct platform_device *om_3d7k_snd_device;
++
++static int __init om_3d7k_init(void)
++{
++      int ret;
++
++      if (!machine_is_om_3d7k()) {
++              printk(KERN_INFO "Only 3D7K supported by ASoC driver\n");
++              return -ENODEV;
++      }
++
++      /* register bluetooth DAI here */
++      ret = snd_soc_register_dai(&bt_dai);
++      if (ret)
++              return ret;
++
++      om_3d7k_snd_device = platform_device_alloc("soc-audio", 1);
++      if (!om_3d7k_snd_device)
++              return -ENOMEM;
++
++      platform_set_drvdata(om_3d7k_snd_device, &om_3d7k_snd_devdata);
++      om_3d7k_snd_devdata.dev = &om_3d7k_snd_device->dev;
++      ret = platform_device_add(om_3d7k_snd_device);
++
++      if (ret) {
++              platform_device_put(om_3d7k_snd_device);
++              return ret;
++      }
++
++      return ret;
++}
++
++static void __exit om_3d7k_exit(void)
++{
++      platform_device_unregister(om_3d7k_snd_device);
++}
++
++module_init(om_3d7k_init);
++module_exit(om_3d7k_exit);
++
++/* Module information */
++MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org; Ben Dooks <ben@simtec.co.uk>");
++MODULE_DESCRIPTION("ALSA SoC WM8753 OM 3D7K");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2412-i2s.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2412-i2s.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2412-i2s.c      2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2412-i2s.c   2009-05-10 22:28:00.000000000 +0200
+@@ -22,6 +22,7 @@
+ #include <linux/delay.h>
+ #include <linux/clk.h>
+ #include <linux/kernel.h>
++#include <linux/io.h>
+ #include <sound/core.h>
+ #include <sound/pcm.h>
+@@ -30,20 +31,16 @@
+ #include <sound/soc.h>
+ #include <mach/hardware.h>
+-#include <linux/io.h>
+-#include <asm/dma.h>
+-
+-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
++#include <plat/regs-s3c2412-iis.h>
+-#include <mach/regs-gpio.h>
+-#include <mach/audio.h>
++#include <plat/regs-gpio.h>
++#include <plat/audio.h>
+ #include <mach/dma.h>
+ #include "s3c24xx-pcm.h"
+ #include "s3c2412-i2s.h"
+ #define S3C2412_I2S_DEBUG 0
+-#define S3C2412_I2S_DEBUG_CON 0
+ #if S3C2412_I2S_DEBUG
+ #define DBG(x...) printk(KERN_INFO x)
+@@ -73,431 +70,7 @@
+       .dma_size       = 4,
+ };
+-struct s3c2412_i2s_info {
+-      struct device   *dev;
+-      void __iomem    *regs;
+-      struct clk      *iis_clk;
+-      struct clk      *iis_pclk;
+-      struct clk      *iis_cclk;
+-
+-      u32              suspend_iismod;
+-      u32              suspend_iiscon;
+-      u32              suspend_iispsr;
+-};
+-
+-static struct s3c2412_i2s_info s3c2412_i2s;
+-
+-#define bit_set(v, b) (((v) & (b)) ? 1 : 0)
+-
+-#if S3C2412_I2S_DEBUG_CON
+-static void dbg_showcon(const char *fn, u32 con)
+-{
+-      printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn,
+-             bit_set(con, S3C2412_IISCON_LRINDEX),
+-             bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY),
+-             bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY),
+-             bit_set(con, S3C2412_IISCON_TXFIFO_FULL),
+-             bit_set(con, S3C2412_IISCON_RXFIFO_FULL));
+-
+-      printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n",
+-             fn,
+-             bit_set(con, S3C2412_IISCON_TXDMA_PAUSE),
+-             bit_set(con, S3C2412_IISCON_RXDMA_PAUSE),
+-             bit_set(con, S3C2412_IISCON_TXCH_PAUSE),
+-             bit_set(con, S3C2412_IISCON_RXCH_PAUSE));
+-      printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn,
+-             bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE),
+-             bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE),
+-             bit_set(con, S3C2412_IISCON_IIS_ACTIVE));
+-}
+-#else
+-static inline void dbg_showcon(const char *fn, u32 con)
+-{
+-}
+-#endif
+-
+-/* Turn on or off the transmission path. */
+-static void s3c2412_snd_txctrl(int on)
+-{
+-      struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
+-      void __iomem *regs = i2s->regs;
+-      u32 fic, con, mod;
+-
+-      DBG("%s(%d)\n", __func__, on);
+-
+-      fic = readl(regs + S3C2412_IISFIC);
+-      con = readl(regs + S3C2412_IISCON);
+-      mod = readl(regs + S3C2412_IISMOD);
+-
+-      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+-
+-      if (on) {
+-              con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+-              con &= ~S3C2412_IISCON_TXDMA_PAUSE;
+-              con &= ~S3C2412_IISCON_TXCH_PAUSE;
+-
+-              switch (mod & S3C2412_IISMOD_MODE_MASK) {
+-              case S3C2412_IISMOD_MODE_TXONLY:
+-              case S3C2412_IISMOD_MODE_TXRX:
+-                      /* do nothing, we are in the right mode */
+-                      break;
+-
+-              case S3C2412_IISMOD_MODE_RXONLY:
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      mod |= S3C2412_IISMOD_MODE_TXRX;
+-                      break;
+-
+-              default:
+-                      dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n");
+-              }
+-
+-              writel(con, regs + S3C2412_IISCON);
+-              writel(mod, regs + S3C2412_IISMOD);
+-      } else {
+-              /* Note, we do not have any indication that the FIFO problems
+-               * tha the S3C2410/2440 had apply here, so we should be able
+-               * to disable the DMA and TX without resetting the FIFOS.
+-               */
+-
+-              con |=  S3C2412_IISCON_TXDMA_PAUSE;
+-              con |=  S3C2412_IISCON_TXCH_PAUSE;
+-              con &= ~S3C2412_IISCON_TXDMA_ACTIVE;
+-
+-              switch (mod & S3C2412_IISMOD_MODE_MASK) {
+-              case S3C2412_IISMOD_MODE_TXRX:
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      mod |= S3C2412_IISMOD_MODE_RXONLY;
+-                      break;
+-
+-              case S3C2412_IISMOD_MODE_TXONLY:
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      con &= ~S3C2412_IISCON_IIS_ACTIVE;
+-                      break;
+-
+-              default:
+-                      dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n");
+-              }
+-
+-              writel(mod, regs + S3C2412_IISMOD);
+-              writel(con, regs + S3C2412_IISCON);
+-      }
+-
+-      fic = readl(regs + S3C2412_IISFIC);
+-      dbg_showcon(__func__, con);
+-      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+-}
+-
+-static void s3c2412_snd_rxctrl(int on)
+-{
+-      struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
+-      void __iomem *regs = i2s->regs;
+-      u32 fic, con, mod;
+-
+-      DBG("%s(%d)\n", __func__, on);
+-
+-      fic = readl(regs + S3C2412_IISFIC);
+-      con = readl(regs + S3C2412_IISCON);
+-      mod = readl(regs + S3C2412_IISMOD);
+-
+-      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+-
+-      if (on) {
+-              con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+-              con &= ~S3C2412_IISCON_RXDMA_PAUSE;
+-              con &= ~S3C2412_IISCON_RXCH_PAUSE;
+-
+-              switch (mod & S3C2412_IISMOD_MODE_MASK) {
+-              case S3C2412_IISMOD_MODE_TXRX:
+-              case S3C2412_IISMOD_MODE_RXONLY:
+-                      /* do nothing, we are in the right mode */
+-                      break;
+-
+-              case S3C2412_IISMOD_MODE_TXONLY:
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      mod |= S3C2412_IISMOD_MODE_TXRX;
+-                      break;
+-
+-              default:
+-                      dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+-              }
+-
+-              writel(mod, regs + S3C2412_IISMOD);
+-              writel(con, regs + S3C2412_IISCON);
+-      } else {
+-              /* See txctrl notes on FIFOs. */
+-
+-              con &= ~S3C2412_IISCON_RXDMA_ACTIVE;
+-              con |=  S3C2412_IISCON_RXDMA_PAUSE;
+-              con |=  S3C2412_IISCON_RXCH_PAUSE;
+-
+-              switch (mod & S3C2412_IISMOD_MODE_MASK) {
+-              case S3C2412_IISMOD_MODE_RXONLY:
+-                      con &= ~S3C2412_IISCON_IIS_ACTIVE;
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      break;
+-
+-              case S3C2412_IISMOD_MODE_TXRX:
+-                      mod &= ~S3C2412_IISMOD_MODE_MASK;
+-                      mod |= S3C2412_IISMOD_MODE_TXONLY;
+-                      break;
+-
+-              default:
+-                      dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+-              }
+-
+-              writel(con, regs + S3C2412_IISCON);
+-              writel(mod, regs + S3C2412_IISMOD);
+-      }
+-
+-      fic = readl(regs + S3C2412_IISFIC);
+-      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+-}
+-
+-
+-/*
+- * Wait for the LR signal to allow synchronisation to the L/R clock
+- * from the codec. May only be needed for slave mode.
+- */
+-static int s3c2412_snd_lrsync(void)
+-{
+-      u32 iiscon;
+-      unsigned long timeout = jiffies + msecs_to_jiffies(5);
+-
+-      DBG("Entered %s\n", __func__);
+-
+-      while (1) {
+-              iiscon = readl(s3c2412_i2s.regs + S3C2412_IISCON);
+-              if (iiscon & S3C2412_IISCON_LRINDEX)
+-                      break;
+-
+-              if (timeout < jiffies) {
+-                      printk(KERN_ERR "%s: timeout\n", __func__);
+-                      return -ETIMEDOUT;
+-              }
+-      }
+-
+-      return 0;
+-}
+-
+-/*
+- * Check whether CPU is the master or slave
+- */
+-static inline int s3c2412_snd_is_clkmaster(void)
+-{
+-      u32 iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD);
+-
+-      DBG("Entered %s\n", __func__);
+-
+-      iismod &= S3C2412_IISMOD_MASTER_MASK;
+-      return !(iismod == S3C2412_IISMOD_SLAVE);
+-}
+-
+-/*
+- * Set S3C2412 I2S DAI format
+- */
+-static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+-                             unsigned int fmt)
+-{
+-      u32 iismod;
+-
+-
+-      DBG("Entered %s\n", __func__);
+-
+-      iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD);
+-      DBG("hw_params r: IISMOD: %x \n", iismod);
+-
+-      switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+-      case SND_SOC_DAIFMT_CBM_CFM:
+-              iismod &= ~S3C2412_IISMOD_MASTER_MASK;
+-              iismod |= S3C2412_IISMOD_SLAVE;
+-              break;
+-      case SND_SOC_DAIFMT_CBS_CFS:
+-              iismod &= ~S3C2412_IISMOD_MASTER_MASK;
+-              iismod |= S3C2412_IISMOD_MASTER_INTERNAL;
+-              break;
+-      default:
+-              DBG("unknwon master/slave format\n");
+-              return -EINVAL;
+-      }
+-
+-      iismod &= ~S3C2412_IISMOD_SDF_MASK;
+-
+-      switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+-      case SND_SOC_DAIFMT_RIGHT_J:
+-              iismod |= S3C2412_IISMOD_SDF_MSB;
+-              break;
+-      case SND_SOC_DAIFMT_LEFT_J:
+-              iismod |= S3C2412_IISMOD_SDF_LSB;
+-              break;
+-      case SND_SOC_DAIFMT_I2S:
+-              iismod |= S3C2412_IISMOD_SDF_IIS;
+-              break;
+-      default:
+-              DBG("Unknown data format\n");
+-              return -EINVAL;
+-      }
+-
+-      writel(iismod, s3c2412_i2s.regs + S3C2412_IISMOD);
+-      DBG("hw_params w: IISMOD: %x \n", iismod);
+-      return 0;
+-}
+-
+-static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
+-                               struct snd_pcm_hw_params *params,
+-                               struct snd_soc_dai *dai)
+-{
+-      struct snd_soc_pcm_runtime *rtd = substream->private_data;
+-      u32 iismod;
+-
+-      DBG("Entered %s\n", __func__);
+-
+-      if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+-              rtd->dai->cpu_dai->dma_data = &s3c2412_i2s_pcm_stereo_out;
+-      else
+-              rtd->dai->cpu_dai->dma_data = &s3c2412_i2s_pcm_stereo_in;
+-
+-      /* Working copies of register */
+-      iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD);
+-      DBG("%s: r: IISMOD: %x\n", __func__, iismod);
+-
+-      switch (params_format(params)) {
+-      case SNDRV_PCM_FORMAT_S8:
+-              iismod |= S3C2412_IISMOD_8BIT;
+-              break;
+-      case SNDRV_PCM_FORMAT_S16_LE:
+-              iismod &= ~S3C2412_IISMOD_8BIT;
+-              break;
+-      }
+-
+-      writel(iismod, s3c2412_i2s.regs + S3C2412_IISMOD);
+-      DBG("%s: w: IISMOD: %x\n", __func__, iismod);
+-      return 0;
+-}
+-
+-static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+-                             struct snd_soc_dai *dai)
+-{
+-      int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+-      unsigned long irqs;
+-      int ret = 0;
+-
+-      DBG("Entered %s\n", __func__);
+-
+-      switch (cmd) {
+-      case SNDRV_PCM_TRIGGER_START:
+-              /* On start, ensure that the FIFOs are cleared and reset. */
+-
+-              writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
+-                     s3c2412_i2s.regs + S3C2412_IISFIC);
+-
+-              /* clear again, just in case */
+-              writel(0x0, s3c2412_i2s.regs + S3C2412_IISFIC);
+-
+-      case SNDRV_PCM_TRIGGER_RESUME:
+-      case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+-              if (!s3c2412_snd_is_clkmaster()) {
+-                      ret = s3c2412_snd_lrsync();
+-                      if (ret)
+-                              goto exit_err;
+-              }
+-
+-              local_irq_save(irqs);
+-
+-              if (capture)
+-                      s3c2412_snd_rxctrl(1);
+-              else
+-                      s3c2412_snd_txctrl(1);
+-
+-              local_irq_restore(irqs);
+-              break;
+-
+-      case SNDRV_PCM_TRIGGER_STOP:
+-      case SNDRV_PCM_TRIGGER_SUSPEND:
+-      case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+-              local_irq_save(irqs);
+-
+-              if (capture)
+-                      s3c2412_snd_rxctrl(0);
+-              else
+-                      s3c2412_snd_txctrl(0);
+-
+-              local_irq_restore(irqs);
+-              break;
+-      default:
+-              ret = -EINVAL;
+-              break;
+-      }
+-
+-exit_err:
+-      return ret;
+-}
+-
+-/* default table of all avaialable root fs divisors */
+-static unsigned int s3c2412_iis_fs[] = { 256, 512, 384, 768, 0 };
+-
+-int s3c2412_iis_calc_rate(struct s3c2412_rate_calc *info,
+-                        unsigned int *fstab,
+-                        unsigned int rate, struct clk *clk)
+-{
+-      unsigned long clkrate = clk_get_rate(clk);
+-      unsigned int div;
+-      unsigned int fsclk;
+-      unsigned int actual;
+-      unsigned int fs;
+-      unsigned int fsdiv;
+-      signed int deviation = 0;
+-      unsigned int best_fs = 0;
+-      unsigned int best_div = 0;
+-      unsigned int best_rate = 0;
+-      unsigned int best_deviation = INT_MAX;
+-
+-
+-      if (fstab == NULL)
+-              fstab = s3c2412_iis_fs;
+-
+-      for (fs = 0;; fs++) {
+-              fsdiv = s3c2412_iis_fs[fs];
+-
+-              if (fsdiv == 0)
+-                      break;
+-
+-              fsclk = clkrate / fsdiv;
+-              div = fsclk / rate;
+-
+-              if ((fsclk % rate) > (rate / 2))
+-                      div++;
+-
+-              if (div <= 1)
+-                      continue;
+-
+-              actual = clkrate / (fsdiv * div);
+-              deviation = actual - rate;
+-
+-              printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
+-                     fsdiv, div, actual, deviation);
+-
+-              deviation = abs(deviation);
+-
+-              if (deviation < best_deviation) {
+-                      best_fs = fsdiv;
+-                      best_div = div;
+-                      best_rate = actual;
+-                      best_deviation = deviation;
+-              }
+-
+-              if (deviation == 0)
+-                      break;
+-      }
+-
+-      printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
+-             best_fs, best_div, best_rate);
+-
+-      info->fs_div = best_fs;
+-      info->clk_div = best_div;
+-
+-      return 0;
+-}
+-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
++static struct s3c_i2sv2_info s3c2412_i2s;
+ /*
+  * Set S3C2412 Clock source
+@@ -512,10 +85,12 @@
+       switch (clk_id) {
+       case S3C2412_CLKSRC_PCLK:
++              s3c2412_i2s.master = 1;
+               iismod &= ~S3C2412_IISMOD_MASTER_MASK;
+               iismod |= S3C2412_IISMOD_MASTER_INTERNAL;
+               break;
+       case S3C2412_CLKSRC_I2SCLK:
++              s3c2412_i2s.master = 0;
+               iismod &= ~S3C2412_IISMOD_MASTER_MASK;
+               iismod |= S3C2412_IISMOD_MASTER_EXTERNAL;
+               break;
+@@ -527,74 +102,6 @@
+       return 0;
+ }
+-/*
+- * Set S3C2412 Clock dividers
+- */
+-static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+-                                int div_id, int div)
+-{
+-      struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
+-      u32 reg;
+-
+-      DBG("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div);
+-
+-      switch (div_id) {
+-      case S3C2412_DIV_BCLK:
+-              reg = readl(i2s->regs + S3C2412_IISMOD);
+-              reg &= ~S3C2412_IISMOD_BCLK_MASK;
+-              writel(reg | div, i2s->regs + S3C2412_IISMOD);
+-
+-              DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+-              break;
+-
+-      case S3C2412_DIV_RCLK:
+-              if (div > 3) {
+-                      /* convert value to bit field */
+-
+-                      switch (div) {
+-                      case 256:
+-                              div = S3C2412_IISMOD_RCLK_256FS;
+-                              break;
+-
+-                      case 384:
+-                              div = S3C2412_IISMOD_RCLK_384FS;
+-                              break;
+-
+-                      case 512:
+-                              div = S3C2412_IISMOD_RCLK_512FS;
+-                              break;
+-
+-                      case 768:
+-                              div = S3C2412_IISMOD_RCLK_768FS;
+-                              break;
+-
+-                      default:
+-                              return -EINVAL;
+-                      }
+-              }
+-
+-              reg = readl(s3c2412_i2s.regs + S3C2412_IISMOD);
+-              reg &= ~S3C2412_IISMOD_RCLK_MASK;
+-              writel(reg | div, i2s->regs + S3C2412_IISMOD);
+-              DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+-              break;
+-
+-      case S3C2412_DIV_PRESCALER:
+-              if (div >= 0) {
+-                      writel((div << 8) | S3C2412_IISPSR_PSREN,
+-                             i2s->regs + S3C2412_IISPSR);
+-              } else {
+-                      writel(0x0, i2s->regs + S3C2412_IISPSR);
+-              }
+-              DBG("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR));
+-              break;
+-
+-      default:
+-              return -EINVAL;
+-      }
+-
+-      return 0;
+-}
+ struct clk *s3c2412_get_iisclk(void)
+ {
+@@ -606,20 +113,16 @@
+ static int s3c2412_i2s_probe(struct platform_device *pdev,
+                            struct snd_soc_dai *dai)
+ {
++      int ret;
++
+       DBG("Entered %s\n", __func__);
+-      s3c2412_i2s.dev = &pdev->dev;
++      ret = s3c_i2sv2_probe(pdev, dai, &s3c2412_i2s, S3C2410_PA_IIS);
++      if (ret)
++              return ret;
+-      s3c2412_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100);
+-      if (s3c2412_i2s.regs == NULL)
+-              return -ENXIO;
+-
+-      s3c2412_i2s.iis_pclk = clk_get(&pdev->dev, "iis");
+-      if (s3c2412_i2s.iis_pclk == NULL) {
+-              DBG("failed to get iis_clock\n");
+-              iounmap(s3c2412_i2s.regs);
+-              return -ENODEV;
+-      }
++      s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in;
++      s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out;
+       s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk");
+       if (s3c2412_i2s.iis_cclk == NULL) {
+@@ -628,12 +131,12 @@
+               return -ENODEV;
+       }
+-      clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll"));
++      /* Set MPLL as the source for IIS CLK */
+-      clk_enable(s3c2412_i2s.iis_pclk);
++      clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll"));
+       clk_enable(s3c2412_i2s.iis_cclk);
+-      s3c2412_i2s.iis_clk = s3c2412_i2s.iis_pclk;
++      s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk;
+       /* Configure the I2S pins in correct mode */
+       s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
+@@ -642,66 +145,8 @@
+       s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
+       s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
+-      s3c2412_snd_txctrl(0);
+-      s3c2412_snd_rxctrl(0);
+-
+-      return 0;
+-}
+-
+-#ifdef CONFIG_PM
+-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
+-{
+-      struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
+-      u32 iismod;
+-
+-      if (dai->active) {
+-              i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+-              i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+-              i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+-
+-              /* some basic suspend checks */
+-
+-              iismod = readl(i2s->regs + S3C2412_IISMOD);
+-
+-              if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+-                      pr_warning("%s: RXDMA active?\n", __func__);
+-
+-              if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+-                      pr_warning("%s: TXDMA active?\n", __func__);
+-
+-              if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+-                      pr_warning("%s: IIS active\n", __func__);
+-      }
+-
+-      return 0;
+-}
+-
+-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
+-{
+-      struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
+-
+-      pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
+-              dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+-
+-      if (dai->active) {
+-              writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+-              writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+-              writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+-
+-              writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+-                     i2s->regs + S3C2412_IISFIC);
+-
+-              ndelay(250);
+-              writel(0x0, i2s->regs + S3C2412_IISFIC);
+-
+-      }
+-
+       return 0;
+ }
+-#else
+-#define s3c2412_i2s_suspend NULL
+-#define s3c2412_i2s_resume  NULL
+-#endif /* CONFIG_PM */
+ #define S3C2412_I2S_RATES \
+       (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+@@ -709,11 +154,9 @@
+       SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+ struct snd_soc_dai s3c2412_i2s_dai = {
+-      .name   = "s3c2412-i2s",
+-      .id     = 0,
+-      .probe  = s3c2412_i2s_probe,
+-      .suspend = s3c2412_i2s_suspend,
+-      .resume = s3c2412_i2s_resume,
++      .name           = "s3c2412-i2s",
++      .id             = 0,
++      .probe          = s3c2412_i2s_probe,
+       .playback = {
+               .channels_min   = 2,
+               .channels_max   = 2,
+@@ -727,10 +170,6 @@
+               .formats        = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
+       },
+       .ops = {
+-              .trigger        = s3c2412_i2s_trigger,
+-              .hw_params      = s3c2412_i2s_hw_params,
+-              .set_fmt        = s3c2412_i2s_set_fmt,
+-              .set_clkdiv     = s3c2412_i2s_set_clkdiv,
+               .set_sysclk     = s3c2412_i2s_set_sysclk,
+       },
+ };
+@@ -738,7 +177,7 @@
+ static int __init s3c2412_i2s_init(void)
+ {
+-      return snd_soc_register_dai(&s3c2412_i2s_dai);
++      return  s3c_i2sv2_register_dai(&s3c2412_i2s_dai);
+ }
+ module_init(s3c2412_i2s_init);
+@@ -748,7 +187,6 @@
+ }
+ module_exit(s3c2412_i2s_exit);
+-
+ /* Module information */
+ MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+ MODULE_DESCRIPTION("S3C2412 I2S SoC Interface");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2412-i2s.h linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2412-i2s.h
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2412-i2s.h      2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2412-i2s.h   2009-05-10 22:28:00.000000000 +0200
+@@ -15,9 +15,11 @@
+ #ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H
+ #define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__
+-#define S3C2412_DIV_BCLK      (1)
+-#define S3C2412_DIV_RCLK      (2)
+-#define S3C2412_DIV_PRESCALER (3)
++#include "s3c-i2s-v2.h"
++
++#define S3C2412_DIV_BCLK      S3C_I2SV2_DIV_BCLK
++#define S3C2412_DIV_RCLK      S3C_I2SV2_DIV_RCLK
++#define S3C2412_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER
+ #define S3C2412_CLKSRC_PCLK   (0)
+ #define S3C2412_CLKSRC_I2SCLK (1)
+@@ -26,13 +28,4 @@
+ extern struct snd_soc_dai s3c2412_i2s_dai;
+-struct s3c2412_rate_calc {
+-      unsigned int    clk_div;        /* for prescaler */
+-      unsigned int    fs_div;         /* for root frame clock */
+-};
+-
+-extern int s3c2412_iis_calc_rate(struct s3c2412_rate_calc *info,
+-                               unsigned int *fstab,
+-                               unsigned int rate, struct clk *clk);
+-
+ #endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2443-ac97.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2443-ac97.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c2443-ac97.c     2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c2443-ac97.c  2009-05-10 22:28:00.000000000 +0200
+@@ -31,7 +31,7 @@
+ #include <plat/regs-ac97.h>
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-clock.h>
+-#include <mach/audio.h>
++#include <plat/audio.h>
+ #include <asm/dma.h>
+ #include <mach/dma.h>
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx-i2s.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx-i2s.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx-i2s.c      2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx-i2s.c   2009-05-10 22:28:00.000000000 +0200
+@@ -4,7 +4,7 @@
+  * (c) 2006 Wolfson Microelectronics PLC.
+  * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+  *
+- * (c) 2004-2005 Simtec Electronics
++ * Copyright 2004-2005 Simtec Electronics
+  *    http://armlinux.simtec.co.uk/
+  *    Ben Dooks <ben@simtec.co.uk>
+  *
+@@ -30,11 +30,11 @@
+ #include <mach/hardware.h>
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-clock.h>
+-#include <mach/audio.h>
++#include <plat/audio.h>
+ #include <asm/dma.h>
+ #include <mach/dma.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include "s3c24xx-pcm.h"
+ #include "s3c24xx-i2s.h"
+@@ -175,7 +175,7 @@
+ static int s3c24xx_snd_lrsync(void)
+ {
+       u32 iiscon;
+-      int timeout = 50; /* 5ms */
++      int timeout = 5; /* 500us, 125 should be enough at 8kHz */
+       DBG("Entered %s\n", __func__);
+@@ -291,11 +291,14 @@
+       case SNDRV_PCM_TRIGGER_START:
+       case SNDRV_PCM_TRIGGER_RESUME:
+       case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+-              if (!s3c24xx_snd_is_clkmaster()) {
+-                      ret = s3c24xx_snd_lrsync();
+-                      if (ret)
+-                              goto exit_err;
+-              }
++              if (!s3c24xx_snd_is_clkmaster())
++                      /* we ignore the return code, if it sync'd then fine,
++                       * if it didn't sync, which happens after resume the
++                       * first time when there was a live stream at suspend,
++                       * just let it timeout, the stream picks up OK after
++                       * that and LRCK is evidently working again.
++                       */
++                      s3c24xx_snd_lrsync();
+               if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+                       s3c24xx_snd_rxctrl(1);
+@@ -315,7 +318,6 @@
+               break;
+       }
+-exit_err:
+       return ret;
+ }
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx-pcm.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx-pcm.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx-pcm.c      2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx-pcm.c   2009-05-10 22:28:00.000000000 +0200
+@@ -4,7 +4,7 @@
+  * (c) 2006 Wolfson Microelectronics PLC.
+  * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+  *
+- * (c) 2004-2005 Simtec Electronics
++ * Copyright 2004-2005 Simtec Electronics
+  *    http://armlinux.simtec.co.uk/
+  *    Ben Dooks <ben@simtec.co.uk>
+  *
+@@ -29,7 +29,7 @@
+ #include <asm/dma.h>
+ #include <mach/hardware.h>
+ #include <mach/dma.h>
+-#include <mach/audio.h>
++#include <plat/audio.h>
+ #include "s3c24xx-pcm.h"
+@@ -82,11 +82,19 @@
+ {
+       struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+       dma_addr_t pos = prtd->dma_pos;
++      unsigned int limit;
+       int ret;
+       DBG("Entered %s\n", __func__);
+-      while (prtd->dma_loaded < prtd->dma_limit) {
++      if (s3c_dma_has_circular()) {
++              limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
++      } else
++              limit = prtd->dma_limit;
++
++      DBG("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit);
++
++      while (prtd->dma_loaded < limit) {
+               unsigned long len = prtd->dma_period;
+               DBG("dma_loaded: %d\n", prtd->dma_loaded);
+@@ -130,7 +138,7 @@
+               snd_pcm_period_elapsed(substream);
+       spin_lock(&prtd->lock);
+-      if (prtd->state & ST_RUNNING) {
++      if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
+               prtd->dma_loaded--;
+               s3c24xx_pcm_enqueue(substream);
+       }
+@@ -168,9 +176,14 @@
+                                         prtd->params->client, NULL);
+               if (ret < 0) {
+-                      DBG(KERN_ERR "failed to get dma channel\n");
++                      DBG(KERN_ERR "failed to get dma channel: %d\n", ret);
+                       return ret;
+               }
++
++              /* use the circular buffering if we have it available. */
++              if (s3c_dma_has_circular())
++                      s3c2410_dma_setflags(prtd->params->channel,
++                                           S3C2410_DMAF_CIRCULAR);
+       }
+       s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+@@ -225,23 +238,16 @@
+        * sync to pclk, half-word transfers to the IIS-FIFO. */
+       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+               s3c2410_dma_devconfig(prtd->params->channel,
+-                              S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
+-                              S3C2410_DISRCC_APB, prtd->params->dma_addr);
+-
+-              s3c2410_dma_config(prtd->params->channel,
+-                              prtd->params->dma_size,
+-                              S3C2410_DCON_SYNC_PCLK |
+-                              S3C2410_DCON_HANDSHAKE);
++                                    S3C2410_DMASRC_MEM,
++                                    prtd->params->dma_addr);
+       } else {
+-              s3c2410_dma_config(prtd->params->channel,
+-                              prtd->params->dma_size,
+-                              S3C2410_DCON_HANDSHAKE |
+-                              S3C2410_DCON_SYNC_PCLK);
+-
+               s3c2410_dma_devconfig(prtd->params->channel,
+-                                      S3C2410_DMASRC_HW, 0x3,
+-                                      prtd->params->dma_addr);
++                                    S3C2410_DMASRC_HW, 
++                                    prtd->params->dma_addr);
+       }
++      
++      s3c2410_dma_config(prtd->params->channel,
++                         prtd->params->dma_size);
+       /* flush the DMA channel */
+       s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx_uda134x.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx_uda134x.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c24xx_uda134x.c  2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c24xx_uda134x.c       2009-05-10 22:28:00.000000000 +0200
+@@ -22,7 +22,7 @@
+ #include <sound/s3c24xx_uda134x.h>
+ #include <sound/uda134x.h>
+-#include <asm/plat-s3c24xx/regs-iis.h>
++#include <plat/regs-iis.h>
+ #include "s3c24xx-pcm.h"
+ #include "s3c24xx-i2s.h"
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c64xx-i2s.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c64xx-i2s.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c64xx-i2s.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c64xx-i2s.c   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,219 @@
++/* sound/soc/s3c24xx/s3c64xx-i2s.c
++ *
++ * ALSA SoC Audio Layer - S3C64XX I2S driver
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/clk.h>
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/io.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/initval.h>
++#include <sound/soc.h>
++
++#include <plat/regs-s3c2412-iis.h>
++#include <plat/gpio-bank-d.h>
++#include <plat/gpio-bank-e.h>
++#include <plat/gpio-cfg.h>
++#include <plat/audio.h>
++
++#include <mach/map.h>
++#include <mach/dma.h>
++
++#include "s3c24xx-pcm.h"
++#include "s3c64xx-i2s.h"
++
++static struct s3c2410_dma_client s3c64xx_dma_client_out = {
++      .name           = "I2S PCM Stereo out"
++};
++
++static struct s3c2410_dma_client s3c64xx_dma_client_in = {
++      .name           = "I2S PCM Stereo in"
++};
++
++static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_out[2] = {
++      [0] = {
++              .channel        = DMACH_I2S0_OUT,
++              .client         = &s3c64xx_dma_client_out,
++              .dma_addr       = S3C64XX_PA_IIS0 + S3C2412_IISTXD,
++              .dma_size       = 4,
++      },
++      [1] = {
++              .channel        = DMACH_I2S1_OUT,
++              .client         = &s3c64xx_dma_client_out,
++              .dma_addr       = S3C64XX_PA_IIS1 + S3C2412_IISTXD,
++              .dma_size       = 4,
++      },
++};
++
++static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_in[2] = {
++      [0] = {
++              .channel        = DMACH_I2S0_IN,
++              .client         = &s3c64xx_dma_client_in,
++              .dma_addr       = S3C64XX_PA_IIS0 + S3C2412_IISRXD,
++              .dma_size       = 4,
++      }, 
++      [1] = {
++              .channel        = DMACH_I2S1_IN,
++              .client         = &s3c64xx_dma_client_in,
++              .dma_addr       = S3C64XX_PA_IIS1 + S3C2412_IISRXD,
++              .dma_size       = 4,
++      },
++};
++
++static struct s3c_i2sv2_info s3c64xx_i2s[2];
++
++static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
++{
++      return cpu_dai->private_data;
++}
++
++static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
++                                int clk_id, unsigned int freq, int dir)
++{
++      struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
++      u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
++
++      switch (clk_id) {
++      case S3C64XX_CLKSRC_PCLK:
++              iismod &= ~S3C64XX_IISMOD_IMS_SYSMUX;
++              break;
++
++      case S3C64XX_CLKSRC_MUX:
++              iismod |= S3C64XX_IISMOD_IMS_SYSMUX;
++              break;
++
++      default:
++              return -EINVAL;
++      }
++
++      writel(iismod, i2s->regs + S3C2412_IISMOD);
++
++      return 0;
++}
++
++unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai)
++{
++      struct s3c_i2sv2_info *i2s = to_info(dai);
++
++      return clk_get_rate(i2s->iis_cclk);
++}
++EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate);
++
++static int s3c64xx_i2s_probe(struct platform_device *pdev,
++                           struct snd_soc_dai *dai)
++{
++      struct device *dev = &pdev->dev;
++      struct s3c_i2sv2_info *i2s;
++      int ret;
++
++      dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id);
++
++      if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) {
++              dev_err(dev, "id %d out of range\n", pdev->id);
++              return -EINVAL;
++      }
++
++      i2s = &s3c64xx_i2s[pdev->id];
++
++      ret = s3c_i2sv2_probe(pdev, dai, i2s,
++                            pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0);
++      if (ret)
++              return ret;
++
++      i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
++      i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
++
++      i2s->iis_cclk = clk_get(dev, "audio-bus");
++      if (IS_ERR(i2s->iis_cclk)) {
++              dev_err(dev, "failed to get audio-bus");
++              iounmap(i2s->regs);
++              return -ENODEV;
++      }
++
++      /* configure GPIO for i2s port */
++      switch (pdev->id) {
++      case 0:
++              s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
++              s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
++              s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
++              s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
++              s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
++              break;
++      case 1:
++              s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
++              s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
++              s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
++              s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
++              s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
++      }
++
++      return 0;
++}
++
++
++#define S3C64XX_I2S_RATES \
++      (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
++      SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
++      SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
++
++#define S3C64XX_I2S_FMTS \
++      (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)
++
++struct snd_soc_dai s3c64xx_i2s_dai = {
++      .name           = "s3c64xx-i2s",
++      .id             = 0,
++      .probe          = s3c64xx_i2s_probe,
++      .playback = {
++              .channels_min   = 2,
++              .channels_max   = 2,
++              .rates          = S3C64XX_I2S_RATES,
++              .formats        = S3C64XX_I2S_FMTS,
++      },
++      .capture = {
++              .channels_min   = 2,
++              .channels_max   = 2,
++              .rates          = S3C64XX_I2S_RATES,
++              .formats        = S3C64XX_I2S_FMTS,
++      },
++      .ops = {
++              .set_sysclk     = s3c64xx_i2s_set_sysclk,
++      },
++};
++EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
++
++static int __init s3c64xx_i2s_init(void)
++{
++      return  s3c_i2sv2_register_dai(&s3c64xx_i2s_dai);
++}
++module_init(s3c64xx_i2s_init);
++
++static void __exit s3c64xx_i2s_exit(void)
++{
++      snd_soc_unregister_dai(&s3c64xx_i2s_dai);
++}
++module_exit(s3c64xx_i2s_exit);
++
++/* Module information */
++MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
++MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
++MODULE_LICENSE("GPL");
++
++
++
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c64xx-i2s.h linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c64xx-i2s.h
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c64xx-i2s.h      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c64xx-i2s.h   2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,31 @@
++/* sound/soc/s3c24xx/s3c64xx-i2s.h
++ *
++ * ALSA SoC Audio Layer - S3C64XX I2S driver
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ *      Ben Dooks <ben@simtec.co.uk>
++ *      http://armlinux.simtec.co.uk/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
++#define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
++
++#include "s3c-i2s-v2.h"
++
++#define S3C64XX_DIV_BCLK      S3C_I2SV2_DIV_BCLK
++#define S3C64XX_DIV_RCLK      S3C_I2SV2_DIV_RCLK
++#define S3C64XX_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER
++
++#define S3C64XX_CLKSRC_PCLK   (0)
++#define S3C64XX_CLKSRC_MUX    (1)
++
++extern struct snd_soc_dai s3c64xx_i2s_dai;
++
++extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai);
++
++#endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c-i2s-v2.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c-i2s-v2.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c-i2s-v2.c       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c-i2s-v2.c    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,645 @@
++/* sound/soc/s3c24xx/s3c-i2c-v2.c
++ *
++ * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs.
++ *
++ * Copyright (c) 2006 Wolfson Microelectronics PLC.
++ *    Graeme Gregory graeme.gregory@wolfsonmicro.com
++ *    linux@wolfsonmicro.com
++ *
++ * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics
++ *    http://armlinux.simtec.co.uk/
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/clk.h>
++#include <linux/kernel.h>
++#include <linux/io.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/initval.h>
++#include <sound/soc.h>
++
++#include <plat/regs-s3c2412-iis.h>
++
++#include <plat/audio.h>
++#include <mach/dma.h>
++
++#include "s3c-i2s-v2.h"
++
++#define S3C2412_I2S_DEBUG_CON 0
++#define S3C2412_I2S_DEBUG 0
++
++#if S3C2412_I2S_DEBUG
++#define DBG(x...) printk(KERN_INFO x)
++#else
++#define DBG(x...) do { } while (0)
++#endif
++
++static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
++{
++      return cpu_dai->private_data;
++}
++
++#define bit_set(v, b) (((v) & (b)) ? 1 : 0)
++
++#if S3C2412_I2S_DEBUG_CON
++static void dbg_showcon(const char *fn, u32 con)
++{
++      printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn,
++             bit_set(con, S3C2412_IISCON_LRINDEX),
++             bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY),
++             bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY),
++             bit_set(con, S3C2412_IISCON_TXFIFO_FULL),
++             bit_set(con, S3C2412_IISCON_RXFIFO_FULL));
++
++      printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n",
++             fn,
++             bit_set(con, S3C2412_IISCON_TXDMA_PAUSE),
++             bit_set(con, S3C2412_IISCON_RXDMA_PAUSE),
++             bit_set(con, S3C2412_IISCON_TXCH_PAUSE),
++             bit_set(con, S3C2412_IISCON_RXCH_PAUSE));
++      printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn,
++             bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE),
++             bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE),
++             bit_set(con, S3C2412_IISCON_IIS_ACTIVE));
++}
++#else
++static inline void dbg_showcon(const char *fn, u32 con)
++{
++}
++#endif
++
++
++/* Turn on or off the transmission path. */
++void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
++{
++      void __iomem *regs = i2s->regs;
++      u32 fic, con, mod;
++
++      DBG("%s(%d)\n", __func__, on);
++
++      fic = readl(regs + S3C2412_IISFIC);
++      con = readl(regs + S3C2412_IISCON);
++      mod = readl(regs + S3C2412_IISMOD);
++
++      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
++
++      if (on) {
++              con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
++              con &= ~S3C2412_IISCON_TXDMA_PAUSE;
++              con &= ~S3C2412_IISCON_TXCH_PAUSE;
++
++              switch (mod & S3C2412_IISMOD_MODE_MASK) {
++              case S3C2412_IISMOD_MODE_TXONLY:
++              case S3C2412_IISMOD_MODE_TXRX:
++                      /* do nothing, we are in the right mode */
++                      break;
++
++              case S3C2412_IISMOD_MODE_RXONLY:
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      mod |= S3C2412_IISMOD_MODE_TXRX;
++                      break;
++
++              default:
++                      dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n");
++              }
++
++              writel(con, regs + S3C2412_IISCON);
++              writel(mod, regs + S3C2412_IISMOD);
++      } else {
++              /* Note, we do not have any indication that the FIFO problems
++               * tha the S3C2410/2440 had apply here, so we should be able
++               * to disable the DMA and TX without resetting the FIFOS.
++               */
++
++              con |=  S3C2412_IISCON_TXDMA_PAUSE;
++              con |=  S3C2412_IISCON_TXCH_PAUSE;
++              con &= ~S3C2412_IISCON_TXDMA_ACTIVE;
++
++              switch (mod & S3C2412_IISMOD_MODE_MASK) {
++              case S3C2412_IISMOD_MODE_TXRX:
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      mod |= S3C2412_IISMOD_MODE_RXONLY;
++                      break;
++
++              case S3C2412_IISMOD_MODE_TXONLY:
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      con &= ~S3C2412_IISCON_IIS_ACTIVE;
++                      break;
++
++              default:
++                      dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n");
++              }
++
++              writel(mod, regs + S3C2412_IISMOD);
++              writel(con, regs + S3C2412_IISCON);
++      }
++
++      fic = readl(regs + S3C2412_IISFIC);
++      dbg_showcon(__func__, con);
++      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
++}
++EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl);
++
++void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
++{
++      void __iomem *regs = i2s->regs;
++      u32 fic, con, mod;
++
++      DBG("%s(%d)\n", __func__, on);
++
++      fic = readl(regs + S3C2412_IISFIC);
++      con = readl(regs + S3C2412_IISCON);
++      mod = readl(regs + S3C2412_IISMOD);
++
++      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
++
++      if (on) {
++              con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
++              con &= ~S3C2412_IISCON_RXDMA_PAUSE;
++              con &= ~S3C2412_IISCON_RXCH_PAUSE;
++
++              switch (mod & S3C2412_IISMOD_MODE_MASK) {
++              case S3C2412_IISMOD_MODE_TXRX:
++              case S3C2412_IISMOD_MODE_RXONLY:
++                      /* do nothing, we are in the right mode */
++                      break;
++
++              case S3C2412_IISMOD_MODE_TXONLY:
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      mod |= S3C2412_IISMOD_MODE_TXRX;
++                      break;
++
++              default:
++                      dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
++              }
++
++              writel(mod, regs + S3C2412_IISMOD);
++              writel(con, regs + S3C2412_IISCON);
++      } else {
++              /* See txctrl notes on FIFOs. */
++
++              con &= ~S3C2412_IISCON_RXDMA_ACTIVE;
++              con |=  S3C2412_IISCON_RXDMA_PAUSE;
++              con |=  S3C2412_IISCON_RXCH_PAUSE;
++
++              switch (mod & S3C2412_IISMOD_MODE_MASK) {
++              case S3C2412_IISMOD_MODE_RXONLY:
++                      con &= ~S3C2412_IISCON_IIS_ACTIVE;
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      break;
++
++              case S3C2412_IISMOD_MODE_TXRX:
++                      mod &= ~S3C2412_IISMOD_MODE_MASK;
++                      mod |= S3C2412_IISMOD_MODE_TXONLY;
++                      break;
++
++              default:
++                      dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
++              }
++
++              writel(con, regs + S3C2412_IISCON);
++              writel(mod, regs + S3C2412_IISMOD);
++      }
++
++      fic = readl(regs + S3C2412_IISFIC);
++      DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
++}
++EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl);
++
++/*
++ * Wait for the LR signal to allow synchronisation to the L/R clock
++ * from the codec. May only be needed for slave mode.
++ */
++static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s)
++{
++      u32 iiscon;
++      unsigned long timeout = jiffies + msecs_to_jiffies(5);
++
++      DBG("Entered %s\n", __func__);
++
++      while (1) {
++              iiscon = readl(i2s->regs + S3C2412_IISCON);
++              if (iiscon & S3C2412_IISCON_LRINDEX)
++                      break;
++
++              if (timeout < jiffies) {
++                      printk(KERN_ERR "%s: timeout\n", __func__);
++                      return -ETIMEDOUT;
++              }
++      }
++
++      return 0;
++}
++
++/*
++ * Set S3C2412 I2S DAI format
++ */
++static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
++                             unsigned int fmt)
++{
++      struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
++      u32 iismod;
++
++      DBG("Entered %s\n", __func__);
++
++      iismod = readl(i2s->regs + S3C2412_IISMOD);
++      DBG("hw_params r: IISMOD: %x \n", iismod);
++
++#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
++#define IISMOD_MASTER_MASK S3C2412_IISMOD_MASTER_MASK
++#define IISMOD_SLAVE S3C2412_IISMOD_SLAVE
++#define IISMOD_MASTER S3C2412_IISMOD_MASTER_INTERNAL
++#endif
++
++#if defined(CONFIG_PLAT_S3C64XX)
++/* From Rev1.1 datasheet, we have two master and two slave modes:
++ * IMS[11:10]:
++ *    00 = master mode, fed from PCLK
++ *    01 = master mode, fed from CLKAUDIO
++ *    10 = slave mode, using PCLK
++ *    11 = slave mode, using I2SCLK
++ */
++#define IISMOD_MASTER_MASK (1 << 11)
++#define IISMOD_SLAVE (1 << 11)
++#define IISMOD_MASTER (0x0)
++#endif
++
++      switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++      case SND_SOC_DAIFMT_CBM_CFM:
++              i2s->master = 0;
++              iismod &= ~IISMOD_MASTER_MASK;
++              iismod |= IISMOD_SLAVE;
++              break;
++      case SND_SOC_DAIFMT_CBS_CFS:
++              i2s->master = 1;
++              iismod &= ~IISMOD_MASTER_MASK;
++              iismod |= IISMOD_MASTER;
++              break;
++      default:
++              DBG("unknwon master/slave format\n");
++              return -EINVAL;
++      }
++
++      iismod &= ~S3C2412_IISMOD_SDF_MASK;
++
++      switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++      case SND_SOC_DAIFMT_RIGHT_J:
++              iismod |= S3C2412_IISMOD_SDF_MSB;
++              break;
++      case SND_SOC_DAIFMT_LEFT_J:
++              iismod |= S3C2412_IISMOD_SDF_LSB;
++              break;
++      case SND_SOC_DAIFMT_I2S:
++              iismod |= S3C2412_IISMOD_SDF_IIS;
++              break;
++      default:
++              DBG("Unknown data format\n");
++              return -EINVAL;
++      }
++
++      writel(iismod, i2s->regs + S3C2412_IISMOD);
++      DBG("hw_params w: IISMOD: %x \n", iismod);
++      return 0;
++}
++
++static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
++                               struct snd_pcm_hw_params *params,
++                               struct snd_soc_dai *socdai)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai_link *dai = rtd->dai;
++      struct s3c_i2sv2_info *i2s = to_info(dai->cpu_dai);
++      u32 iismod;
++
++      DBG("Entered %s\n", __func__);
++
++      if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++              dai->cpu_dai->dma_data = i2s->dma_playback;
++      else
++              dai->cpu_dai->dma_data = i2s->dma_capture;
++
++      /* Working copies of register */
++      iismod = readl(i2s->regs + S3C2412_IISMOD);
++      DBG("%s: r: IISMOD: %x\n", __func__, iismod);
++
++      switch (params_format(params)) {
++      case SNDRV_PCM_FORMAT_S8:
++              iismod |= S3C2412_IISMOD_8BIT;
++              break;
++      case SNDRV_PCM_FORMAT_S16_LE:
++              iismod &= ~S3C2412_IISMOD_8BIT;
++              break;
++      }
++
++      writel(iismod, i2s->regs + S3C2412_IISMOD);
++      DBG("%s: w: IISMOD: %x\n", __func__, iismod);
++      return 0;
++}
++
++static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++                             struct snd_soc_dai *dai)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct s3c_i2sv2_info *i2s = to_info(rtd->dai->cpu_dai);
++      int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
++      unsigned long irqs;
++      int ret = 0;
++
++      DBG("Entered %s\n", __func__);
++
++      switch (cmd) {
++      case SNDRV_PCM_TRIGGER_START:
++              /* On start, ensure that the FIFOs are cleared and reset. */
++
++              writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
++                     i2s->regs + S3C2412_IISFIC);
++
++              /* clear again, just in case */
++              writel(0x0, i2s->regs + S3C2412_IISFIC);
++
++      case SNDRV_PCM_TRIGGER_RESUME:
++      case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++              if (!i2s->master) {
++                      ret = s3c2412_snd_lrsync(i2s);
++                      if (ret)
++                              goto exit_err;
++              }
++
++              local_irq_save(irqs);
++
++              if (capture)
++                      s3c2412_snd_rxctrl(i2s, 1);
++              else
++                      s3c2412_snd_txctrl(i2s, 1);
++
++              local_irq_restore(irqs);
++              break;
++
++      case SNDRV_PCM_TRIGGER_STOP:
++      case SNDRV_PCM_TRIGGER_SUSPEND:
++      case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++              local_irq_save(irqs);
++
++              if (capture)
++                      s3c2412_snd_rxctrl(i2s, 0);
++              else
++                      s3c2412_snd_txctrl(i2s, 0);
++
++              local_irq_restore(irqs);
++              break;
++      default:
++              ret = -EINVAL;
++              break;
++      }
++
++exit_err:
++      return ret;
++}
++
++/*
++ * Set S3C2412 Clock dividers
++ */
++static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
++                                int div_id, int div)
++{
++      struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
++      u32 reg;
++
++      DBG("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div);
++
++      switch (div_id) {
++      case S3C_I2SV2_DIV_BCLK:
++              reg = readl(i2s->regs + S3C2412_IISMOD);
++              reg &= ~S3C2412_IISMOD_BCLK_MASK;
++              writel(reg | div, i2s->regs + S3C2412_IISMOD);
++
++              DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
++              break;
++
++      case S3C_I2SV2_DIV_RCLK:
++              if (div > 3) {
++                      /* convert value to bit field */
++
++                      switch (div) {
++                      case 256:
++                              div = S3C2412_IISMOD_RCLK_256FS;
++                              break;
++
++                      case 384:
++                              div = S3C2412_IISMOD_RCLK_384FS;
++                              break;
++
++                      case 512:
++                              div = S3C2412_IISMOD_RCLK_512FS;
++                              break;
++
++                      case 768:
++                              div = S3C2412_IISMOD_RCLK_768FS;
++                              break;
++
++                      default:
++                              return -EINVAL;
++                      }
++              }
++
++              reg = readl(i2s->regs + S3C2412_IISMOD);
++              reg &= ~S3C2412_IISMOD_RCLK_MASK;
++              writel(reg | div, i2s->regs + S3C2412_IISMOD);
++              DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
++              break;
++
++      case S3C_I2SV2_DIV_PRESCALER:
++              if (div >= 0) {
++                      writel((div << 8) | S3C2412_IISPSR_PSREN,
++                             i2s->regs + S3C2412_IISPSR);
++              } else {
++                      writel(0x0, i2s->regs + S3C2412_IISPSR);
++              }
++              DBG("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR));
++              break;
++
++      default:
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++/* default table of all avaialable root fs divisors */
++static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
++
++int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
++                        unsigned int *fstab,
++                        unsigned int rate, struct clk *clk)
++{
++      unsigned long clkrate = clk_get_rate(clk);
++      unsigned int div;
++      unsigned int fsclk;
++      unsigned int actual;
++      unsigned int fs;
++      unsigned int fsdiv;
++      signed int deviation = 0;
++      unsigned int best_fs = 0;
++      unsigned int best_div = 0;
++      unsigned int best_rate = 0;
++      unsigned int best_deviation = INT_MAX;
++
++      if (fstab == NULL)
++              fstab = iis_fs_tab;
++
++      for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) {
++              fsdiv = iis_fs_tab[fs];
++
++              fsclk = clkrate / fsdiv;
++              div = fsclk / rate;
++
++              if ((fsclk % rate) > (rate / 2))
++                      div++;
++
++              if (div <= 1)
++                      continue;
++
++              actual = clkrate / (fsdiv * div);
++              deviation = actual - rate;
++
++              printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
++                     fsdiv, div, actual, deviation);
++
++              deviation = abs(deviation);
++
++              if (deviation < best_deviation) {
++                      best_fs = fsdiv;
++                      best_div = div;
++                      best_rate = actual;
++                      best_deviation = deviation;
++              }
++
++              if (deviation == 0)
++                      break;
++      }
++
++      printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
++             best_fs, best_div, best_rate);
++
++      info->fs_div = best_fs;
++      info->clk_div = best_div;
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
++
++int s3c_i2sv2_probe(struct platform_device *pdev,
++                  struct snd_soc_dai *dai,
++                  struct s3c_i2sv2_info *i2s,
++                  unsigned long base)
++{
++      struct device *dev = &pdev->dev;
++
++      i2s->dev = dev;
++
++      /* record our i2s structure for later use in the callbacks */
++      dai->private_data = i2s;
++
++      i2s->regs = ioremap(base, 0x100);
++      if (i2s->regs == NULL) {
++              dev_err(dev, "cannot ioremap registers\n");
++              return -ENXIO;
++      }
++
++      i2s->iis_pclk = clk_get(dev, "iis");
++      if (i2s->iis_pclk == NULL) {
++              DBG("failed to get iis_clock\n");
++              iounmap(i2s->regs);
++              return -ENOENT;
++      }
++
++      clk_enable(i2s->iis_pclk);
++
++      s3c2412_snd_txctrl(i2s, 0);
++      s3c2412_snd_rxctrl(i2s, 0);
++
++      return 0;
++}
++
++EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
++
++#ifdef CONFIG_PM
++static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
++{
++      struct s3c_i2sv2_info *i2s = to_info(dai);
++      u32 iismod;
++
++      if (dai->active) {
++              i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
++              i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
++              i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
++
++              /* some basic suspend checks */
++
++              iismod = readl(i2s->regs + S3C2412_IISMOD);
++
++              if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
++                      pr_warning("%s: RXDMA active?\n", __func__);
++
++              if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
++                      pr_warning("%s: TXDMA active?\n", __func__);
++
++              if (iismod & S3C2412_IISCON_IIS_ACTIVE)
++                      pr_warning("%s: IIS active\n", __func__);
++      }
++
++      return 0;
++}
++
++static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
++{
++      struct s3c_i2sv2_info *i2s = to_info(dai);
++
++      pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
++              dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
++
++      if (dai->active) {
++              writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
++              writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
++              writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
++
++              writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
++                     i2s->regs + S3C2412_IISFIC);
++
++              ndelay(250);
++              writel(0x0, i2s->regs + S3C2412_IISFIC);
++      }
++
++      return 0;
++}
++#else
++#define s3c2412_i2s_suspend NULL
++#define s3c2412_i2s_resume  NULL
++#endif
++
++int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
++{
++      dai->ops.trigger = s3c2412_i2s_trigger;
++      dai->ops.hw_params = s3c2412_i2s_hw_params;
++      dai->ops.set_fmt = s3c2412_i2s_set_fmt;
++      dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
++
++      dai->suspend = s3c2412_i2s_suspend;
++      dai->resume = s3c2412_i2s_resume;
++
++      return snd_soc_register_dai(dai);
++}
++
++EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c-i2s-v2.h linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c-i2s-v2.h
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/s3c-i2s-v2.h       1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/s3c-i2s-v2.h    2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,90 @@
++/* sound/soc/s3c24xx/s3c-i2s-v2.h
++ *
++ * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver
++ *
++ * Copyright (c) 2007 Simtec Electronics
++ *    http://armlinux.simtec.co.uk/
++ *    Ben Dooks <ben@simtec.co.uk>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++*/
++
++/* This code is the core support for the I2S block found in a number of
++ * Samsung SoC devices which is unofficially named I2S-V2. Currently the
++ * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S
++ * channels via configurable GPIO.
++ */
++
++#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H
++#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__
++
++#define S3C_I2SV2_DIV_BCLK    (1)
++#define S3C_I2SV2_DIV_RCLK    (2)
++#define S3C_I2SV2_DIV_PRESCALER       (3)
++
++/**
++ * struct s3c_i2sv2_info - S3C I2S-V2 information
++ * @dev: The parent device passed to use from the probe.
++ * @regs: The pointer to the device registe block.
++ * @master: True if the I2S core is the I2S bit clock master.
++ * @dma_playback: DMA information for playback channel.
++ * @dma_capture: DMA information for capture channel.
++ * @suspend_iismod: PM save for the IISMOD register.
++ * @suspend_iiscon: PM save for the IISCON register.
++ * @suspend_iispsr: PM save for the IISPSR register.
++ *
++ * This is the private codec state for the hardware associated with an
++ * I2S channel such as the register mappings and clock sources.
++ */
++struct s3c_i2sv2_info {
++      struct device   *dev;
++      void __iomem    *regs;
++
++      struct clk      *iis_pclk;
++      struct clk      *iis_cclk;
++      struct clk      *iis_clk;
++
++      unsigned char    master;
++
++      struct s3c24xx_pcm_dma_params   *dma_playback;
++      struct s3c24xx_pcm_dma_params   *dma_capture;
++
++      u32              suspend_iismod;
++      u32              suspend_iiscon;
++      u32              suspend_iispsr;
++};
++
++struct s3c_i2sv2_rate_calc {
++      unsigned int    clk_div;        /* for prescaler */
++      unsigned int    fs_div;         /* for root frame clock */
++};
++
++extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
++                                 unsigned int *fstab,
++                                 unsigned int rate, struct clk *clk);
++
++/**
++ * s3c_i2sv2_probe - probe for i2s device helper
++ * @pdev: The platform device supplied to the original probe.
++ * @dai: The ASoC DAI structure supplied to the original probe.
++ * @i2s: Our local i2s structure to fill in.
++ * @base: The base address for the registers.
++ */
++extern int s3c_i2sv2_probe(struct platform_device *pdev,
++                         struct snd_soc_dai *dai,
++                         struct s3c_i2sv2_info *i2s,
++                         unsigned long base);
++
++/**
++ * s3c_i2sv2_register_dai - register dai with soc core
++ * @dai: The snd_soc_dai structure to register
++ *
++ * Fill in any missing fields and then register the given dai with the
++ * soc core.
++ */
++extern int s3c_i2sv2_register_dai(struct snd_soc_dai *dai);
++
++#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/smdk6410-wm8731.c linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/smdk6410-wm8731.c
+--- linux-2.6.29-rc3.owrt/sound/soc/s3c24xx/smdk6410-wm8731.c  1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29-rc3.owrt.om/sound/soc/s3c24xx/smdk6410-wm8731.c       2009-05-10 22:28:00.000000000 +0200
+@@ -0,0 +1,227 @@
++
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/kernel.h>
++#include <linux/clk.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++
++#include "../codecs/wm8731.h"
++#include "s3c64xx-i2s.h"
++
++static struct platform_device *socdev;
++
++
++
++static void wm_shutdown(struct snd_pcm_substream *substream)
++{
++      printk(KERN_INFO "%s: substream %p\n", __func__, substream);
++}
++
++static int wm_hw_params(struct snd_pcm_substream *substream,
++                      struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++      unsigned int fmt;
++      int ret;
++
++      printk(KERN_INFO "%s: (%p,%p)\n", __func__, substream, params);
++      printk(KERN_INFO "%s: dai: cpu %p, codec %p\n", __func__, cpu_dai, codec_dai);
++
++      //fmt = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS;
++      fmt = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM;
++      fmt |= SND_SOC_DAIFMT_I2S;
++
++      ret = snd_soc_dai_set_fmt(codec_dai, fmt);
++      if (ret < 0)
++              return ret;
++
++      /* set cpu DAI configuration */
++      ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
++      if (ret < 0)
++              return ret;
++
++      if (fmt == (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM)) {
++              unsigned long iis_clkrate;
++
++              ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_MUX, 0,
++                                           SND_SOC_CLOCK_OUT);
++              if (ret < 0) {
++                      printk(KERN_ERR "%s: cpu set_sysclk err\n", __func__);
++                      return ret;
++              }
++
++              /* set prescaler division for sample rate */
++              ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C64XX_DIV_PRESCALER, 1);
++              if (ret < 0) {
++                      printk(KERN_ERR "%s: codec clkdiv err\n", __func__);
++                      return ret;
++              }
++
++              iis_clkrate = s3c64xx_i2s_get_clockrate(cpu_dai) / 2;
++              printk(KERN_INFO "%s: clockrate %ld\n", __func__, iis_clkrate);
++
++              iis_clkrate = 12000000; //tmphack//
++
++              /* set the codec system clock for DAC and ADC */
++              ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
++                                           iis_clkrate,
++                                           SND_SOC_CLOCK_IN);
++              if (ret < 0) {
++                      printk(KERN_ERR "%s: codec sysclk err\n", __func__);
++                      return ret;
++              }
++
++      } else {
++              /* TODO */
++              BUG();
++      }
++
++      return 0;
++}
++
++static int wm_startup(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
++      struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++      int ret;
++
++      ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_MUX, 0,
++                                   SND_SOC_CLOCK_OUT);
++      if (ret < 0) {
++              printk(KERN_ERR "%s: cpu set_sysclk err\n", __func__);
++              return ret;
++      }
++
++      ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C64XX_DIV_PRESCALER, 1);
++      if (ret < 0) {
++              printk(KERN_ERR "%s: cpu set_clkdiv err\n", __func__);
++              return ret;
++      }
++
++      ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
++                                   12000000, SND_SOC_CLOCK_IN);
++      if (ret < 0) {
++              printk(KERN_ERR "%s: codec sysclk err\n", __func__);
++              return ret;
++      }
++
++      return 0;
++}
++
++static struct snd_soc_ops wm_ops = {
++      .startup        = wm_startup,
++      .hw_params      = wm_hw_params,
++      .shutdown       = wm_shutdown,
++};
++
++static const struct snd_soc_dapm_widget widgets[] = {
++      SND_SOC_DAPM_LINE("Line Out", NULL),
++      SND_SOC_DAPM_HP("Headphone Jack", NULL),
++      SND_SOC_DAPM_INPUT("Line In"),
++};
++
++static const struct snd_soc_dapm_route intercon[] = {
++      /* headphone connected to LHPOUT1, RHPOUT1 */
++      {"Headphone Jack", NULL, "LHPOUT"},
++      {"Headphone Jack", NULL, "RHPOUT"},
++
++      {"Line Out", NULL, "LOUT" },
++      {"Line Out", NULL, "ROUT" },
++
++      {"LLINEIN", NULL, "Line In" },
++      {"RLINEIN", NULL, "Line In" },
++};
++
++static int wm_init(struct snd_soc_codec *codec)
++{
++      printk(KERN_DEBUG "%s: codec %p\n", __func__, codec);
++
++      snd_soc_dapm_new_controls(codec, widgets, ARRAY_SIZE(widgets));
++      snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
++
++      snd_soc_dapm_sync(codec);
++
++      return 0;
++}
++
++#include "s3c24xx-pcm.h"
++
++static struct snd_soc_dai_link wm_dai_link = {
++      .name           = "WM8731",
++      .stream_name    = "WM8731",
++      .cpu_dai        = &s3c64xx_i2s_dai,
++      .codec_dai      = &wm8731_dai,
++      .init           = wm_init,
++      .ops            = &wm_ops,
++};
++
++static struct snd_soc_card wm_card = {
++      .name           = "SMDK6410-WM8731",
++      .dai_link       = &wm_dai_link,
++      .platform       = &s3c24xx_soc_platform,
++      .num_links      = 1,
++};
++
++struct wm8731_setup_data wm_setup = {
++      .i2c_bus        = 0,
++      .i2c_address    = 0x1a,
++};
++
++static struct snd_soc_device wm_snd_devdata = {
++      .card           = &wm_card,
++      .codec_dev      = &soc_codec_dev_wm8731,
++      .codec_data     = &wm_setup,
++};
++
++static int __init smdk6410_wm8731_init(void)
++{
++      int ret;
++
++      printk(KERN_INFO "%s: welcome\n", __func__);
++
++      if (!machine_is_smdk6410()) {
++              printk(KERN_INFO "%s: for SMDK6410s\n", __func__);
++              return -ENOENT;
++      }
++
++      socdev = platform_device_alloc("soc-audio", 0);
++      if (!socdev) {
++              printk(KERN_ERR "%s: no device\n", __func__);
++              return -ENOMEM;
++      }
++
++      platform_set_drvdata(socdev, &wm_snd_devdata);
++
++      wm_snd_devdata.dev = &socdev->dev;
++
++      ret = platform_device_add(socdev);
++      if (ret) {
++              printk(KERN_ERR "%s: failed to add\n", __func__);
++              goto err_dev;
++      }
++
++      printk(KERN_INFO "%s: succesfull\n", __func__);
++      return 0;
++
++err_dev:
++      platform_device_put(socdev);
++      return ret;
++}
++
++module_init(smdk6410_wm8731_init);
++MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
++MODULE_LICENSE("GPL");
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/soc-core.c linux-2.6.29-rc3.owrt.om/sound/soc/soc-core.c
+--- linux-2.6.29-rc3.owrt/sound/soc/soc-core.c 2009-05-10 22:09:10.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/soc-core.c      2009-05-10 22:28:00.000000000 +0200
+@@ -1190,6 +1190,7 @@
+ }
+ #endif
++
+ /**
+  * snd_soc_new_ac97_codec - initailise AC97 device
+  * @codec: audio codec
+diff -ruN --exclude='*.orig' --exclude='*.rej' linux-2.6.29-rc3.owrt/sound/soc/soc-dapm.c linux-2.6.29-rc3.owrt.om/sound/soc/soc-dapm.c
+--- linux-2.6.29-rc3.owrt/sound/soc/soc-dapm.c 2009-05-10 22:05:01.000000000 +0200
++++ linux-2.6.29-rc3.owrt.om/sound/soc/soc-dapm.c      2009-05-10 22:28:00.000000000 +0200
+@@ -332,6 +332,24 @@
+                       snprintf(path->long_name, name_len, "%s %s",
+                                w->name, w->kcontrols[i].name);
++
++                      /*
++                       * This is an ugly Openmoko revert for name
++                       * changes in alsa configuration. This is mergeable
++                       * with the future Linux version.
++                       * We force the truncation again for now because we
++                       * can't cope with mass breakage on alsa state files
++                       * that are spread all over the different distros.
++                       * FIXME: Remember to revert this change.
++                       */
++
++                      if (name_len > 32) {
++                              printk(KERN_WARNING __FILE__ ":%d mixer name "
++                              "'%s' truncated to 31 characters.\n",
++                              __LINE__, path->long_name);
++                              name_len = 32;
++                      }
++
+                       path->long_name[name_len - 1] = '\0';
+                       path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w,
+@@ -876,7 +894,7 @@
+ }
+ static int snd_soc_dapm_set_pin(struct snd_soc_codec *codec,
+-      char *pin, int status)
++                              const char *pin, int status)
+ {
+       struct snd_soc_dapm_widget *w;
+@@ -1396,6 +1414,76 @@
+ EXPORT_SYMBOL_GPL(snd_soc_dapm_put_value_enum_double);
+ /**
++ * snd_soc_dapm_info_pin_switch - Info for a pin switch
++ *
++ * @kcontrol: mixer control
++ * @uinfo: control element information
++ *
++ * Callback to provide information about a pin switch control.
++ */
++int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
++                               struct snd_ctl_elem_info *uinfo)
++{
++      uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++      uinfo->count = 1;
++      uinfo->value.integer.min = 0;
++      uinfo->value.integer.max = 1;
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dapm_info_pin_switch);
++
++/**
++ * snd_soc_dapm_get_pin_switch - Get information for a pin switch
++ *
++ * @kcontrol: mixer control
++ * @ucontrol: Value
++ */
++int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
++                              struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      const char *pin = (const char *)kcontrol->private_value;
++
++      mutex_lock(&codec->mutex);
++
++      ucontrol->value.integer.value[0] =
++              snd_soc_dapm_get_pin_status(codec, pin);
++
++      mutex_unlock(&codec->mutex);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_switch);
++
++/**
++ * snd_soc_dapm_put_pin_switch - Set information for a pin switch
++ *
++ * @kcontrol: mixer control
++ * @ucontrol: Value
++ */
++int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
++                              struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
++      const char *pin = (const char *)kcontrol->private_value;
++
++      mutex_lock(&codec->mutex);
++
++      if (ucontrol->value.integer.value[0])
++              snd_soc_dapm_enable_pin(codec, pin);
++      else
++              snd_soc_dapm_disable_pin(codec, pin);
++
++      snd_soc_dapm_sync(codec);
++
++      mutex_unlock(&codec->mutex);
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dapm_put_pin_switch);
++
++/**
+  * snd_soc_dapm_new_control - create new dapm control
+  * @codec: audio codec
+  * @widget: widget template
+@@ -1549,7 +1637,7 @@
+  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
+  * do any widget power switching.
+  */
+-int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin)
++int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin)
+ {
+       return snd_soc_dapm_set_pin(codec, pin, 1);
+ }
+@@ -1564,7 +1652,7 @@
+  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
+  * do any widget power switching.
+  */
+-int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin)
++int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin)
+ {
+       return snd_soc_dapm_set_pin(codec, pin, 0);
+ }
+@@ -1584,7 +1672,7 @@
+  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
+  * do any widget power switching.
+  */
+-int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin)
++int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin)
+ {
+       return snd_soc_dapm_set_pin(codec, pin, 0);
+ }
+@@ -1599,7 +1687,7 @@
+  *
+  * Returns 1 for connected otherwise 0.
+  */
+-int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin)
++int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin)
+ {
+       struct snd_soc_dapm_widget *w;
+@@ -1613,6 +1701,56 @@
+ EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status);
+ /**
++ * snd_soc_dapm_get_endpoint - get audio endpoint status
++ * @codec: audio codec
++ * @endpoint: audio signal endpoint (or start point)
++ *
++ * Get audio endpoint status - connected or disconnected.
++ *
++ * Returns status
++ */
++int snd_soc_dapm_get_endpoint(struct snd_soc_codec *codec,
++      char *endpoint)
++{
++      struct snd_soc_dapm_widget *w;
++
++      list_for_each_entry(w, &codec->dapm_widgets, list) {
++              if (!strcmp(w->name, endpoint)) {
++                      return w->connected;
++              }
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dapm_get_endpoint);
++
++/**
++ * snd_soc_dapm_set_endpoint - set audio endpoint status
++ * @codec: audio codec
++ * @endpoint: audio signal endpoint (or start point)
++ * @status: point status
++ *
++ * Set audio endpoint status - connected or disconnected.
++ *
++ * Returns 0 for success else error.
++ */
++int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec,
++        char *endpoint, int status)
++{
++        struct snd_soc_dapm_widget *w;
++
++        list_for_each_entry(w, &codec->dapm_widgets, list) {
++               if (!strcmp(w->name, endpoint)) {
++                        w->connected = status;
++                        return 0;
++                }
++        }
++
++        return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dapm_set_endpoint);
++
++/**
+  * snd_soc_dapm_free - free dapm resources
+  * @socdev: SoC device
+  *
diff --git a/target/linux/s3c24xx/patches-2.6.29/002-call-preinit-instead-of-init.patch b/target/linux/s3c24xx/patches-2.6.29/002-call-preinit-instead-of-init.patch
new file mode 100644 (file)
index 0000000..8ab3a5c
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -825,6 +825,7 @@ static int noinline init_post(void)
+               printk(KERN_WARNING "Failed to execute %s.  Attempting "
+                                       "defaults...\n", execute_command);
+       }
++      run_init_process("/etc/preinit");
+       run_init_process("/sbin/init");
+       run_init_process("/etc/init");
+       run_init_process("/bin/init");
This page took 5.55624 seconds and 4 git commands to generate.